summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2009-12-27Merge branch 'fix/hda' into for-linusTakashi Iwai
2009-12-27ALSA: hda - Fix Oops at reloading beep devicesTakashi Iwai
The recent change for supporting dynamic beep device allocation caused a problem resulting in Oops at reloading the driver. Also, it ignores the error from input device registration. This patch fixes the wrong check in snd_hda_detach_beep_device(), and returns an error when the input device registration fails properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-27ALSA: hda - Don't cache beep controlsTakashi Iwai
The beep control verbs don't need to be cached for resume. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-26ALSA: sound/arm: Fix build failure caused by missing struct aaci definitionPeter Huewe
This patch fixes a build failure introduced by the patch ALSA: AACI: factor common hw_params logic into aaci_pcm_hw_params [1] by adding/moving the aaci struct to the right position. The patch mentioned above merged common source parts into one function, but unfortunately left out the aaci struct and consequently caused a build failure e.g. for arm versatile_config [2] References: [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=d3aee7996c30f928bbbbfd0994148e35d2e83084 [2] http://kisskb.ellerman.id.au/kisskb/buildresult/1893605/ Patch against Linus' tree. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-25ALSA: hda - use snd_hda_jack_detect() again in patch_sigmatel.cTakashi Iwai
Use snd_hda_jack_detect() again for jack-sensing. The triggering problem can be worked around with codec->no_trigger_sense flag now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-25ALSA: hda - Disable tigger at pin-sensing on AD codecsTakashi Iwai
Analog Device codecs seem to have problems with the triggering of pin-sensing although their pincaps give the trigger requirements. Some reported that constant CPU load on HP laptops with AD codecs. For avoiding this regression, add a flag to codec struct to notify explicitly that the codec doesn't suppot the trigger at pin-sensing. Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-25ALSA: hda - HDMI sticky stream tag supportWu Fengguang
When we run the following commands in turn (with CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0), speaker-test -Dhw:0,3 -c2 -twav # HDMI speaker-test -Dhw:0,0 -c2 -twav # Analog The second command will produce sound in the analog lineout _as well as_ HDMI sink. The root cause is, device 0 "reuses" the same stream tag that was used by device 3, and the "intelhdmi - sticky stream id" patch leaves the HDMI codec in a functional state. So the HDMI codec happily accepts the audio samples which reuse its stream tag. The proposed solution is to remember the last device each azx_dev was assigned to, and prefer to 1) reuse the azx_dev (and hence the stream tag) the HDMI codec last used 2) or assign a never-used azx_dev for HDMI With this patch and the above two speaker-test commands, HDMI codec will use stream tag 8 and Analog codec will use 5. The stream tag used by HDMI codec won't be reused by others, as long as we don't run out of the 4 playback azx_dev's. The legacy Analog codec will continue to use stream tag 5 because its device id is 0 (this is a bit tricky). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-25ALSA: Fix indentation in pcm_native.cGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-23Merge branch 'fix/hda' into for-linusTakashi Iwai
2009-12-23Merge branch 'fix/asoc' into for-linusTakashi Iwai
2009-12-23Merge branch 'fix/misc' into for-linusTakashi Iwai
2009-12-23ALSA: hda - Add STAC9205 PCI_QUIRK for Dell Vostro 1700Anisse Astier
Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-23ASoC: Do not write to invalid registers on the wm9712.Eric Millbrandt
This patch fixes a bug where "virtual" registers were being written to the ac97 bus. This was causing unrelated registers to become corrupted (headphone 0x04, touchscreen 0x78, etc). This patch duplicates protection that was included in the wm9713 driver. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-12-23ALSA: hda - Set mixer name after codec patchTakashi Iwai
Postpone the mixer name setup after the codec patch since the codec patch may change the codec name string in itself. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-22ASoC: add missing parameter to mx27vis_hifi_hw_free()Guennadi Liakhovetski
Commit 2ccafed4 added an extra parameter to the DAI .set_pll() method, but it missed this call in sound/soc/imx/mx27vis_wm8974.c. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-22ASoC: sh: FSI:: don't check platform_get_irq's return value against zeroUwe Kleine-König
platform_get_irq returns -ENXIO on failure, so !irq was probably always true. Better use (int)irq <= 0. Note that a return value of zero is still handled as error even though this could mean irq0. This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that changed the return value of platform_get_irq from 0 to -ENXIO on error. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-22ALSA: sound/core/pcm_timer.c: use lib/gcd.cFlorian Fainelli
Make sound/core/pcm_timer.c use lib/gcd.c Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-22ALSA: hda - Add MSI blacklistTakashi Iwai
A machine with AMD CPU with Nvidia board doesn't work with MSI. Reported-by: Robert J. King <peritus@gurunetwork.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-22ALSA: hda - Add support for the new 27 inch IMacsRafael Avila de Espindola
With the attached patch I am able to use the sound on a new IMac 27. What works: *) Internal speakers *) Internal microphone *) Headphone I don't have an external mic or a SPDIF device to test the rest. Signed-off-by: Rafael Avila de Espindola <rafael.espindola@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-22ALSA: hda - Fix NULL dereference with enable_beep=0 optionTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-21Merge branch 'fix/misc' into for-linusTakashi Iwai
2009-12-21Merge branch 'fix/asoc' into for-linusTakashi Iwai
2009-12-21Merge branch 'fix/hda' into for-linusTakashi Iwai
2009-12-21ALSA: sbawe: fix memory detectionKrzysztof Helt
Memory amount is increased before a successful write-read sequence is done. Thus, 512 kB of onboard memory is detected on memoryless cards like SB32. Move the increasing of memory counter after successful read is done. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-21ALSA: fix incorrect rounding direction in snd_interval_ratnum()Krzysztof Helt
The direction of rounding is incorrect in the snd_interval_ratnum() It was detected with following parameters (sb8 driver playing 8kHz stereo file): - num is always 1000000 - requested frequency rate is from 7999 to 7999 (single frequency) The first loop calculates div_down(num, freq->min) which is 125. Thus, a frequency range's minimum value is 1000000 / 125 = 8000 Hz. The second loop calculates div_up(num, freq->max) which is 126 The frequency range's maximum value is 1000000 / 126 = 7936 Hz. The range maximum is lower than the range minimum so the function fails due to empty result range. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-21Merge remote branch 'alsa/fixes' into fix/hdaTakashi Iwai
2009-12-21ALSA: HDA: add powersaving hook for RealtekHector Martin
The current Realtek code makes no specific provision for turning stuff off. The codec chip is placed into low-power mode generically, but this doesn't turn off any external hardware connected to it, in particular external amplifiers. This patch creates a hook function that is called by the codec suspend/resume functions. It ought to disable any external hardware in a device-specific way. I've implemented a generic ALC889 function that sets the EAPD pin properly, and used it for the Acer Aspire 8930G which can benefit from this feature. On my laptop, this results in ~0.5W extra savings. Signed-off-by: Hector Martin <hector@marcansoft.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-21ALSA: HDA: remove useless mixers on Aspire 8930GHector Martin
This patch removes some extra mixers that do nothing on the Acer Aspire 8930G. The CD mixer is useless because the SATA DVD/Blu-Ray drive has no analog audio output, and the Side mixer is useless because we max out at 6ch anyway. Signed-off-by: Hector Martin <hector@marcansoft.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-21ALSA: HDA: simplify Aspire 8930G verb arrayHector Martin
This patch just simplifies the 8930G verb array a bit. Just use the common ALC889 EAPD verb array to make things more consistent. The file is already huge enough already. Signed-off-by: Hector Martin <hector@marcansoft.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-21ALSA: hda: Set Front Mic to input vref 50% for Lenovo 3000 Y410Daniel T Chen
BugLink: https://bugs.launchpad.net/bugs/479373 The OR has verified with hda-verb that the internal microphone needs VREF50 set for audible capture. Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-20ALSA: hda/realtek: Remove extra .capsrc_nids initialization for ALC889_INTELJaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2009-12-20Merge branch 'fix/hda' of ↵Jaroslav Kysela
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into fixes
2009-12-19ALSA: Use kzalloc for allocating only one thingJulia Lawall
Use kzalloc rather than kcalloc(1,...) The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ @@ - kcalloc(1, + kzalloc( ...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-18ALSA: AACI: switch to per-pcm lockingRussell King
We can use finer-grained locking, which makes things easier when we gain DMA support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-18ALSA: AACI: add double-rate supportRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-18ALSA: AACI: factor common hw_params logic into aaci_pcm_hw_paramsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-18ALSA: AACI: cleanup aaci_pcm_hw_paramsRussell King
Since the recording and playback paths are now the same, eliminate the needless conditionals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-18ALSA: AACI: simplify codec rate informationRussell King
There's no need for a specific rule; ALSA's generic AC'97 support calculates the necessary rate constraint information itself, and we can use this directly. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-18ALSA: aaci - Fix a typoTakashi Iwai
Fixed a typo of the max buffer size specified for buffer allocation changed in the commit d6797322231af98b9bb4afb175dd614cf511e5f7. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-18ASoC: wm8974: fix a wrong bit definitionGuennadi Liakhovetski
The wm8974 datasheet defines BUFIOEN as bit 2. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-12-18sound: sgio2audio/pdaudiocf/usb-audio: initialize PCM bufferClemens Ladisch
When allocating the PCM buffer, use vmalloc_user() instead of vmalloc(). Otherwise, it would be possible for applications to play the previous contents of the kernel memory to the speakers, or to read it directly if the buffer is exported to userspace. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-18ALSA: hda - Fix quirk for Maxdata obook4-1Takashi Iwai
Works fine with the auto-parser. Reference: Novell bnc#564940 https://bugzilla.novell.com/show_bug.cgi?id=564940 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-17ALSA: hda - Fix missing capsrc_nids for ALC88xTakashi Iwai
Some model quirks missed the corresponding capsrc_nids. This resulted in non-working capture source selection. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2009-12-17ALSA: hda - Make use of beep device found in Dell Vostro 1015nEinar Rünkaru
Conexant CX20583-10Z has digital beep device with volume control. Making use of them. Signed-off-by: Einar Rünkaru <einarry@smail.ee> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-17ALSA: hda - Fixed internal mic initialization for Dell Vostro 1015Einar Rünkaru
Fixed initialization of internal mic and added internal mic boost control Renamed analog mic boost control to ext mic boost contol. Name pair analog/digital seems too confusing for a normal user. Signed-off-by: Einar Rünkaru <einarry@smail.ee> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-17ALSA: hda - More ALC663 fixes and support of compatible chipsKailang Yang
1. Add more ASUS NB model. 2. Fixed alc663_m51va_setup M51VA has Digital Mic that NID is 0x12. The record source index is 0x9 for ALC663. So, to modify the alc663_m51va_setup function to index 0x9 and add analog Mic aupport function alc663_mode1_setup. 3. Add ASUS mode7 and mode8 modules for ALC663 Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-17sound/oss/pss: Fix test of unsigned in pss_reset_dsp() and pss_download_boot()Roel Kluin
limit and jiffies are unsigned so the test did not work. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-16mfd: twl: fix twl4030 rename for remaining driver, board filesBalaji T K
Recent drivers/mfd/twl4030* renames to twl broke compile for various boards as the series was missing a patch to change the board-*.c files. This patch renames include twl4030.h to include twl.h and also renames twl4030_i2c_ routines. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-16ASoC: Fix disable of SPDIF on STAC9766 codecJon Smirl
Change code so that switching to playing music through the analog output disables SPDIF out instead of disabling it when stream ends. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: ac97_codec - increase timeout for analog sections to 5 second ASoC: Correct code taking the size of a pointer ALSA: hda - Add PCI IDs for Nvidia G2xx-series ALSA: sound/isa/gus: Correct code taking the size of a pointer ALSA: hda: Fix max PCM level to 0 dB for AD1981_HP ALSA: hda: Use ALC260_WILL quirk for another Acer model (0x1025007f)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-07 10:47:39 +0000