summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2011-03-03ALSA: hda - add new Fermi 5xx codec IDs to snd-hdaRichard Samson
Added the missing HDMI codec IDs for new Nvidia stuff. Note that ID 0x17 isn't assigned to anything so far, as suggested by Stephen. [Modified to get rid of 0x17 by tiwai] Signed-off-by: Richard Samson <samson.richard@gmail.com> Acked-by: Acked-By: Stephen Warren <swarren@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-03ASoC: Add a late_probe() callback to cardsMark Brown
This is run after the DAPM widgets and routes are added, allowing setup of things like jacks using the routes. The main card probe() is run before anything else so can't be used for this purpose. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-03ASoC: Allow card DAPM widgets and routes to be set up at registrationMark Brown
These will be added after all devices are registered and allow most DAI init functions in machine drivers to be replaced by simple data. Regular controls are not supported as the registration function still works in terms of CODECs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-03ASoC: Add a per-card DAPM contextMark Brown
This means that rather than adding the board specific DAPM widgets to a random CODEC DAPM context they can be added to the card itself which is a bit cleaner. Previously there only was one DAPM context and it was tied to the single supported CODEC. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-03ASoC: Check for a CODEC before dereferencing in DAPMMark Brown
A CODEC pointer is optional (and is checked for in most contexts within DAPM) - add checks to the few places where it was missed. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-03ASoC: Get the card directly from the DAPM contextMark Brown
Rather than indirecting through the CODEC we can look the card up directly from the card pointer in the DAPM context. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-03ASoC: Add TLV information for WM8978 DAC limiterMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-03Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-03-03ASoC: Fix broken bitfield definitions in WM8978Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-03-03ASoC: WM8994: Ensure MICBIAS is provided with a clockDimitris Papastamos
The patch 'ASoC: WM8994: Improve Playback Robustness' did not handle this case properly. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-02Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and ↵Tony Lindgren
'devel-hsmmc' into omap-for-linus Conflicts: arch/arm/mach-omap2/omap_hwmod_44xx_data.c
2011-03-02Merge branch 'devel-cleanup' into omap-for-linusTony Lindgren
Conflicts: arch/arm/mach-omap2/timer-gp.c
2011-03-01ASoC: Add platform data for WM9081 IRQ pin configurationMark Brown
The WM9081 IRQ output can be either active high or active low and can support either CMOS or open drain modes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-01ASoC: Remove module probe announcements from CODEC driversMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-01ASoC: Fix burstsize and DSP_B format problems in imx-ssi.Javier Martin
When choosing IMX_DMA flag, burtsizes are set to its default value (0) which leads to driver malfunction. Change them to 4. DSP_B interface needs additional flag to match DSP_B formats as described in several codecs as wm8741 and aic3205. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-01ASoC: WM8994: Ensure MICBIAS is provided with a clockDimitris Papastamos
The patch 'ASoC: WM8994: Improve Playback Robustness' did not handle this case properly. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-01Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-03-01ASoC: WM8994: Ensure late enable events are processed for the ADCsDimitris Papastamos
Ensure that the ADCs are provided with a clock as the previous patch "ASoC: WM8994: Improve playback robustness" did not handle this case properly. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-03-01ASoC: WM8994: Don't disable the AIF[1|2]CLK_ENA unconditionalyDimitris Papastamos
Since we began using the late clock disable functionality, ensure that we don't disable the clock if any of the ADC or DAC paths are still enabled. This happens when we have simultaneous playback and recording. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-03-01ASoC: Fix WM9081 platform data initialisationMark Brown
It went AWOL in the multi-component conversion. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-03-01eukrea-tlv320: add MBIMXSD51 supportEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-01ALSA: hda - Fix unable to record issue on ASUS N82JVChih-Wei Huang
The codec of N82JV is ALC269VB. Signed-off-by: Chih-Wei Huang <cwhuang@linux.org.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: eukrea-tlv320: fix platform_name ASoC: correct pxa AC97 DAI names ALSA: hda - Add support for new IDT 92HD98 and 92HD99 codecs ALSA: HDA: Add ideapad quirk for two Dell machines ALSA: HDA: Add a new Conexant codec 506e (20590) ALSA: usb-audio: fix oops due to cleanup race when disconnecting ASoC: Hook wm_hubs micbiases up to CLK_SYS ASoC: Correct definition of WM8903_VMID_RES_5K ASoC: Fix WM8958 default microphone detection argument ordering ALSA: HDA: Fix mic initialization in VIA auto parser ALSA: fix one memory leak in sound jack
2011-02-28dt/sound: Eliminate users of of_platform_{,un}register_driverGrant Likely
Get rid of users of of_platform_driver in drivers/sound. The of_platform_{,un}register_driver functions are going away, so the users need to be converted to using the platform_bus_type directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-28ALSA: HDA: Realtek: Fixup jack detection to input subsystemDavid Henningsson
This patch fixes an error in the jack detection reporting, causing the jack detection sometimes not to be reported correctly to the input subsystem. It should apply to several Realtek codecs. Cc: stable@kernel.org Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-28ASoC: Tegra: Fix error handling in DMA channel allocStephen Warren
tegra_dma_allocate_channel() returns NULL on errors, not an error pointer. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-28ALSA: hdspm - Fix midi port initializationAdrian Knoth
Depending on the model and the presence of a TCO module, the number of midi ports varies. Some have 1 port (MADIface), some have 2 (default), with TCO, there are 3. Don't hardcode the number of midi ports to initialize. This patch also fixes a boot lockup on MADIface. [Coding-style fixes by tiwai] Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-28ALSA: hdspm - Abort on unknown firmware revisionAdrian Knoth
Don't continue if we cannot detect the real card type, otherwise, all subsequent functions, especially strcpy(), would fail, leaving the whole driver in an unusable state. Without such a protection, dmesg would look like this: Pid: 1525, comm: modprobe Not tainted 2.6.38-rc6 #1 MSI MS-7250/MS-7250 EIP: 0060:[<c114e700>] EFLAGS: 00010296 CPU: 1 EIP is at strcpy+0x10/0x30 EAX: f4d33e58 EBX: f5990800 ECX: f4d33e58 EDX: 00000000 ESI: 00000000 EDI: f4d33e58 EBP: f5990930 ESP: f3dd3e0c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 f53d4204 00000000 f90bfc03 00000001 00000001 f3dd3e64 c10fedff f3dd3e7c f3d854e4 f53d4000 c10307b8 00000001 c10307b8 f5990860 c10307b8 00000001 c10332e5 f59908bc c12f4339 f59908bc f5990860 c11ef207 f4d33e00 f53d4000 [<f90bfc03>] ? snd_hdspm_probe+0x7e7/0x1166 [snd_hdspm] [<c10fedff>] ? __sysfs_add_one+0x1f/0xf0 [<c10307b8>] ? get_parent_ip+0x8/0x20 [<c10307b8>] ? get_parent_ip+0x8/0x20 [<c10307b8>] ? get_parent_ip+0x8/0x20 [<c10332e5>] ? add_preempt_count+0xa5/0xd0 [<c12f4339>] ? _raw_spin_lock_irqsave+0x19/0x40 [<c11ef207>] ? pm_runtime_enable+0x17/0x80 [<c1160172>] ? local_pci_probe+0x42/0xb0 [<c1161091>] ? pci_device_probe+0x61/0x80 [<c11e9587>] ? driver_probe_device+0x77/0x180 [<c11600f0>] ? pci_match_device+0xa0/0xc0 [<c11e9709>] ? __driver_attach+0x79/0x80 [<c11e9690>] ? __driver_attach+0x0/0x80 [<c11e8e32>] ? bus_for_each_dev+0x52/0x80 [<c11e9416>] ? driver_attach+0x16/0x20 [<c11e9690>] ? __driver_attach+0x0/0x80 [<c11e8771>] ? bus_add_driver+0xa1/0x220 [<c1160f20>] ? pci_device_remove+0x0/0xf0 [<c11e99a3>] ? driver_register+0x63/0x120 [<c11612bd>] ? __pci_register_driver+0x3d/0xb0 [<c1001132>] ? do_one_initcall+0x32/0x160 [<f90d6000>] ? alsa_card_hdspm_init+0x0/0x14 [snd_hdspm] [<c10676a9>] ? sys_init_module+0x99/0x1e0 [<c10ade3d>] ? sys_close+0x6d/0xc0 [<c1002c90>] ? sysenter_do_call+0x12/0x26 ---[ end trace 239f0661c558378b ]--- Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-28ALSA: hdspm - Add updated firmware revision for AES32Adrian Knoth
In contrast to the PCIe version (RME AES), the PCI version (RME AES32) has a different firmware revision. This patch adds the missing PCI revision. Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-28ALSA: hdspm - AES32: Use define instead of hardcoded channel countAdrian Knoth
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-28ASoC: Staticise non-exported symbols in SGTL5000Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-28ASoC: remove unnecessary header including in SGTL5000 codec driverZeng Zhaoming
Remove unnecessary headers: - mach/hardware.h in sgtl5000.c - linux/i2c.h in sgtl5000.h Signed-off-by: Zeng Zhaoming <b32542@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-28ALSA: powermac - Allow input from microphone on TumblerRisto Suominen
Allow input from microphone on remaining PowerBooks and iBooks with Tumbler. Tested only with PowerBook G4 Gigabit Ethernet (PowerBook3,3). [Fixed to use of_machine_is_compatible by tiwai] Signed-off-by: Risto Suominen <Risto.Suominen@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-27sound:core:seq:seq_ports.c Remove one to many n's in a word.Justin P. Mattock
The Patch below removes one to many "n's" in a word.. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-26Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-02-26Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-25ASoC: eukrea-tlv320: add MBIMXSD51 supportEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Liam Girdwood <lrg@slimogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-25ASoC: Move WM2000 to dev_pm_opsMark Brown
There's a general move to use dev_pm_ops rather than bus specific functions in order to facilitate work on the PM core. Do this conversion to WM2000. The driver ought to be updated to work better in a multi-component model but the mechanical conversion ensures that we avoid blocking PM core work until that happens. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-25eukrea-tlv320: fix platform_nameEric Bénard
commit f0fba2ad1b6b53d5360125c41953b7afcd6deff0 included a mistake on the name of the platform in the snd_soc_dai_link structure. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-25ASoC: Add Freescale SGTL5000 codec supportZeng Zhaoming
Add Freescale SGTL5000 codec support. Supported features: - line-in and mic input - headphone and line-out output - line-in bypass ADC and DAC to headphone - 16, 20, 24, 32 bit audio - 8 ~ 96k sample rates Signed-off-by: Zeng Zhaoming <zhaoming.zeng@freescale.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-25ASoC: remove one to many l's in the wordJustin P. Mattock
The patch below removes an extra "l" in the word. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-25Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-02-25ASoC: Tegra: Move utilities to separate moduleStephen Warren
The utilities will be required by every machine driver. Including the utility object directly into every machine driver causes a build failure if the modules are actually built into the kernel, since each will define the symbols exported by the utility file. Solve this by moving the utility object into a separate module. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-25ASoC: soc-dapm: Include quotes around contents in debugfs entriesDimitris Papastamos
Sometimes the name of the control switch of a dapm route contains spaces which makes it impossible to distinguish it from the source widget. Add quotes around the names of the widgets to makes these parsable. Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-02-25ASoC: Remove -codec suffix from WM9081 driverMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-25ASoC: correct pxa AC97 DAI namesDmitry Eremin-Solenikov
Correct names for pxa AC97 DAI are pxa2xx-ac97 and pxa2xx-ac97-aux. Fix that for all PXA platforms. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-02-25ALSA: emu10k1 - emu10k1_main.c remove one to many l's in the word.Justin P. Mattock
The patch below removes an extra "l" in the word. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-25ALSA: hda - patch_realtek.c remove one to many l's in the word.Justin P. Mattock
The patch below removes an extra "l" in the word. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-02-24ASoC: McBSP: get hw params from McBSP driverKishon Vijay Abraham I
Removed the use of macros to obtain base address and DMA channel number. Instead use the McBSP driver API's that passes base address and DMA channel number to the client driver. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-24ALSA: hda - Add support for new IDT 92HD98 and 92HD99 codecsVitaliy Kulikov
Also fix number of 92HD87 pins to exclude invalid pins. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 20:26:18 +0000