summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2011-07-07ASoC: twl6040: No need to convert the PLL IDPeter Ujfalusi
Since the PLL handling has been simplified, and rebased on 0, there is no longer need for converting the PLL ID. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: Configure PLL only oncePeter Ujfalusi
Avoid configuring the PLL several times during audio startup. We can configure the PLL at prepare time with parameters collected earlier hw_param, and set_dai_sysclk calls. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: Simplify sample rate constraint handlingPeter Ujfalusi
We can manage the sample rate constraints without the need to maintain a variable and a pointer. This simplifies the handling of the constraint, and makes it more robust. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: Move PLL selection to codec driverPeter Ujfalusi
It is better if the selection between the Low power, and High performance PLL is handled within the codec driver, not in machine driver(s) to avoid duplicated code, and also to have consistent tracking of the selected PLL, and the resulting differences in supported sample rates. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: Use neutral name for power mode text/enumPeter Ujfalusi
Change the variable names to be neutral (not refering to HS). This will ease up the introduction of PLL selection, which going to use the same enum strings. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ASoC: twl6040: Do not use wrapper for irq requestPeter Ujfalusi
The twl6040_request_irq/free_irq inline functions are going to be removed, so replace them with direct calls. The irq number is provided by the core driver via resource. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-07ARM i.MX dma: Fix burstsize settingsSascha Hauer
dmaengine expects the maxburst parameter in words, not bytes. The imxdma driver and its users do this wrong. Fix this. As a side note the imx-pcm-dma-mx2 driver was 'fixed' to work with imx-dma. This broke the driver with imx-sdma support which correctly takes the maxburst parameter in words. This patch puts the sdma based sound back to work. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ALSA: hda - Clean-up PCM assignments in patch_realtek.cTakashi Iwai
Instead of assigning each default hda_pcm_stream pointers, do NULL-checks and assign default values in alc_build_pcms(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07ALSA: hda - Unify alc*_auto_init_input_src() in patch_realtek.cTakashi Iwai
The only different implmentation was alc880_auto_init_input_src(), and now it covers this variant, and we can use the single function for all codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07ALSA: hda - Parse ADCs and CAPSRCs dynamically for Realtek auto-parserTakashi Iwai
Now with the new code for looking for ADCs and MUXs, we can replace the whole ADC assignment with the parsed results. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07ALSA: hda - Unify alc_auto_init_analog_input() callsTakashi Iwai
All alc*_auto_init_analog_input() calls are identical, so let's use the same function more clearly without aliases. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07ALSA: hda - Parse ADCs in alc_auto_create_input_ctls()Takashi Iwai
Parse ADCs and cap-srcs in alc_auto_create_input_ctls() by itself instead of passing explicitly from the caller. By this change, all alc*_auto_create_input_ctls() can be unified to the same calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07ALSA: hda - Code consolidation for ALC88x and ALC662 auto-parsersTakashi Iwai
Use the same common code for auto-parsing the output paths and their initializations, based on the existing ALC662 code, which is smarter than the old ALC880/2 code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07ALSA: hda - Create bind-mutes appropriately for ALC662 auto-parserTakashi Iwai
When multiple inputs are present on the mixer widget (typically a DAC and a loopback), mute/unmute both inputs with the corresponding mixer element. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07ALSA: hda - Initialize DACs in ALC662 auto-parser modeTakashi Iwai
The initialization of DACs was missing in ALC662 parser code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07ALSA: hda - Parse HP and speaker DACs even for multi connections for ALC662Takashi Iwai
In alc662_auto_fill_dac_nids(), the HP and speaker DACs aren't parsed when the corresponding pins aren't fixed with single DACs. Now check these DACs even for non-fixed pins. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-07Merge branch 'fix/hda' into topic/hdaTakashi Iwai
2011-07-07ALSA: hda - Change all ADCs for dual-adc switching mode for RealtekTakashi Iwai
When the dual-adc switching mode is active in Realtek auto-parser, we need to couple all ADCs as a single capture-volume. Currently, the volume control changes only the first ADC, thus others may remain silent. This patch fixes the problem. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-06ALSA: hda - Add Realtek ALC269VC codec supportKailang Yang
Add the support of ALC269VC codec. Also delete the unnecessary codec_variant type enum list: now only three variants (ALC269VA ALC269VB ALC269VC) are needed. In addition, added some aliases: - Add ALC269VB alias name ALC277 - Add ALC269VC alias name ALC259 ALC281X - Add ALC269VC for Lenovo device 0x21f3 name ALC3202 Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-05ASoC: Tegra: Implement SPDIF CPU DAIStephen Warren
This is a minimal driver for the Tegra SPDIF controller. In hardware, the SPDIF output signal is always routed to any active HDMI display controllers, and may also be routed to external pins on Tegra using the pinmux. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-05ASoC: core - Add platform IO tracingLiam Girdwood
Trace platform IO just like CODEC IO. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-05ASoC: core - Add convenience register for platform kcontrol and DAPMLiam Girdwood
Allow platform probe to register platform kcontrols and DAPM just like the CODEC probe(). Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-05ASoC: core - Add platform widget IOLiam Girdwood
Allow platform driver widgets to perform any IO required for DAPM. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-05ASoC: core - Add API call to register platform kcontrols.Liam Girdwood
In preparation for Dynamic PCM (AKA DSP) support. Allow platform drivers to register kcontrols. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-05ASoC: Manage WM8731 ACTIVE bit as a supply widgetMark Brown
Now we have supply widgets there's no need to open code the handling of the ACTIVE bit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-07-05ASoC: Manage WM8731 ACTIVE bit as a supply widgetMark Brown
Now we have supply widgets there's no need to open code the handling of the ACTIVE bit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-07-05ASoC: Don't set invalid name string to snd_card->driver fieldTakashi Iwai
The snd_card->driver field contains a driver name string, and in general it shouldn't contain space or special letters. The commit 2b39535b9e54888649923beaab443af212b6c0fd changed the string copy from card->name, but the long name string may contain such letters, thus it may still lead to a segfault. A temporary fix is not to copy the long name string but just keep it empty as the earlier version did. Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-05Merge branch 'for-3.1' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc
2011-07-05Merge branch 'for-3.0' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into fix/asoc
2011-07-05Merge branch 'for-3.1' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2011-07-05Merge branch 'for-3.0' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into fix/asoc
2011-07-04ASoC: core - Add platform read and write.Liam Girdwood
In preparation for ASoC Dynamic PCM (AKA DSP) support. Allow platform driver to perform IO. Intended for platform DAPM. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: tlv320aic3x: Add correct hw registers to Line1 cross connect muxesJarkko Nikula
Commit af46800 ("ASoC: Implement mux control sharing") revealed that "Left Line1[L | R] Mux" and "Right Line1[L | R] Mux" widgets were pointing to the same kcontrols and codec registers and thus soc-core falsely detected them as shared controls. This is actually wrong since there are separate registers in hardware that configure Line1L to RADC and Line1R to LADC cross connects so these muxes should not be shared. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2011-07-04ASoC: twl6040: Configure ramp step based on platformAxel Castaneda Gonzalez
Enable ramp down/up step to be configured based on platform. Signed-off-by: Axel Castaneda Gonzalez <x0055901@ti.com> Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: twl6040: set default constraints.Liam Girdwood
Set default sysclk constraints to high performance mode. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: twl6040: Remove pll and headset mode dependencyMisael Lopez Cruz
Remove dependency between pll (hppll, lppll) and headset power mode (low-power, high-performance), as headset power mode can be used with any pll. A new control is created to allow headset power mode configuration from userspace. Changing headset power mode during earpiece related usecases is not propagated down to the codec as earpiece requires HS DAC in HP mode. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: twl6040: Support other sample rates in constraints.Liam Girdwood
Add other supported sample rates to LP and HP modes. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: twl6040: add all ABE DAIsLiam Girdwood
Add all DAIs to fully support OMAP4 ABE. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: twl6040: Convert into TWL6040 MFD childMisael Lopez Cruz
Convert TWL6040 CODEC driver into a TWL6040 MFD child, it implies that MFD-level operations like register accesses, clock setting and power management are done through MFD APIs, not directly by CODEC driver anymore. To avoid conflicts with the other MFD child, vibrator registers are skipped in CODEC driver. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04Merge branch 'for-3.0' into for-3.1Mark Brown
2011-07-04ASoC: Ensure we delay long enough for WM8994 FLL to lock when startingMark Brown
This delay is very conservative. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-07-04ASoC: Tegra: I2S: s/clk_get_sys/clk_get/Stephen Warren
The clock needed by the I2S driver is associated with the I2S device name in the standard fashion. Hence, use clk_get(dev) instead of clk_get_sys(clk_name). Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04ASoC: Tegra: I2S: Ensure clock is enabled when writing regsStephen Warren
The I2S controller needs a clock to respond to register writes. Without this, register writes will at worst hang the CPU. In practice, I've only observed writes being dropped. Luckily, the dropped register writes historically had no effect: TEGRA_I2S_TIMING: The value we wrote was the reset default. TEGRA_I2S_FIFO_SCR: The default was for the FIFOs to request more data when one slot was empty. The requested value was for the FIFOs to request when four slots were empty. The DMA controller in the mainline kernel is configured to burst a single entry at a time into the FIFO, hence there was no issue. The only negative effect was on bus efficiency losses due to an increased number of arbitration attempts. However, in various non-upstream changes, the DMA controller now bursts four entries at a time into the FIFO. If there is only space for one entry, the data is simply dropped. In practice, this resulted in 3/4 of samples being dropped, and playback at 4x the expected rate and pitch. By fixing the clocking issue, this is solved. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-04MFD: twl4030-audio: Rename platform dataPeter Ujfalusi
Allign the platform data names for twl4030 audio submodule: twl4030_audio_data: for the core MFD driver twl4030_codec_data: for ASoC codec driver twl4030_vibra_data: for the input/ForceFeedback driver To avoid breakage, change all depending drivers, files to use the new types. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-04MFD: twl4030-codec -> twl4030-audio: Rename the driverPeter Ujfalusi
Rename the driver, and header file from twl4030-codec to twl4030-audio. To avoid breakage change depending drivers at the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: Misael Lopez Cruz <misael.lopez@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-04ALSA: hda - Don't add aa-mix for VIA surroundsTakashi Iwai
Since we now route the front DAC via aa-mix widget, adding the aa-mix to surrounds will result in a mix-up of both front and surround PCM signals. For avoiding this, the aa-mix routes have to be disabled for surround paths. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-04ALSA: hda - Create HP-vol control properly for VIA codecsTakashi Iwai
When the individual DAC is available for the headphone output, the driver should create the DAC for its volume control. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-04ALSA: hda - Define some constants in patch_via.cTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-04ALSA: hda - Fix invalid multi-channel amplifiers for VT1718SLydia Wang
For VT1718S, the multi-channel path should be like following: DAC 0-->Mixer 9(index 5)-->Mixer 0(index 1)-->Front Pin; DAC 1-->Mixer 1(index 0)-->Surround Pin; DAC 2-->C/LFE Pin; DAC 3-->Mixer 2(index 0)-->Side Pin; But current code built Surround and Side path through index 1 of Mixer 1 and 2. So Adjusting Surround and Side channel amplifier is invalid. This patch fixes the issue. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-07-04ALSA: hda - Fix issue that front can't output sound for VT1718SLydia Wang
For VT1718S, Mixer 9 doesn't expose the connection to DAC 0. So when building up a 'PCM Playback' amplifier control, it will fail since getting DAC 0 index of Mixer 9 returned -1. So I added a dac_mixer_idx to indicated the actual index of DAC 0 to Mixer 9. Following is the patch and next mail is another. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-18 09:33:16 +0000