summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2013-05-15ASoC: davinci-sffsdr: Staticize non exported structLars-Peter Clausen
The pcm3008_codec struct is not used outside of davinci-sffsdr.c, so make it static. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-15ASoC: sn95031: Staticize non exported structLars-Peter Clausen
The sn95031_codec struct is not used outside of sn95031.c, so make it static. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-15ASoC: mop500: Staticize non exported structLars-Peter Clausen
The mop500_dai_links struct is not used outside of mop500.c, so make it static. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-15ASoC: mop500_ab8500: Staticize non exported functionsLars-Peter Clausen
The mop500_ab8500_startup(), the mop500_ab8500_shutdown() and the mop500_ab8500_hw_params() function are not used outside of mop500_ab8500, so make them static. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-15ASoC: bf5xx-tdm-pcm: Staticize non exported structLars-Peter Clausen
The bf5xx_tdm_pcm_ops struct is only used in bf5xx-tdm-pcm.c, so make it static. Cc: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-15ASoC: mmp-sspa: Staticize non exported structLars-Peter Clausen
The mmp_sspa_dai struct is only used in mmp-sspa.c, so make it static. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-15ASoC: mmp-pcm: Staticize non exported structs and functionsLars-Peter Clausen
The mmp_pcm_ops and mmp_soc_platform struct as well as the mmp_pcm_new() function are only used in mmp-pcm.c, so make them static. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-15ASoC: spear: spdif_out: Staticize unexported functionLars-Peter Clausen
The spdif_soc_dai_probe function is only used in spdif_out.c, so make it static. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-15ASoC: spear: spdif_in: Staticize non exported structLars-Peter Clausen
The spdif_in_dai struct is not used outside of spdif_in.c, so make it static. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-15ASoC: kirkwood-dma: Staticize non exported structLars-Peter Clausen
The kirkwood_dma_ops struct is not used outside of kirkwood-dma.c, so make it static. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-15ASoC: ep93xx-i2s: Staticize non exported structLars-Peter Clausen
The ep93xx_i2s_dma_data struct is not used outside of ep93xx-i2s.c, so make it static. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-14Merge remote-tracking branch 'asoc/fix/wm0010' into asoc-linusMark Brown
2013-05-14Merge remote-tracking branch 'asoc/fix/ux500' into asoc-linusMark Brown
2013-05-14Merge remote-tracking branch 'asoc/fix/da7213' into asoc-linusMark Brown
2013-05-14ASoC: core: Use kasprintf instead of opencoding itLars-Peter Clausen
kasprintf calculates the size of the result string, allocates a buffer large enough to hold the string and then performs the format string operation. There are a couple of places in ASoC where these three steps are done by hand and where kasprintf can be used instead. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-14ASoC: core: Add helper function to initialize the runtime pcmLars-Peter Clausen
We use the same code to initialize the runtime pcm based on the snd_soc_pcm_stream struct on both the playback and capture path. Factor this code into a helper function to make things a bit more tidy. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-14ASoC: core: Move snd_soc_set_runtime_hwparams() to soc-pcm.cLars-Peter Clausen
snd_soc_set_runtime_hwparams() is the only PCM related function that lives in soc-core.c. All other PCM related functions live in soc-pcm.c, so move snd_soc_set_runtime_hwparams() over as well for a bit more consistency. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-14ASoC: wm_adsp: memory leak in wm_adsp_create_control()Dan Carpenter
There are two return paths which don't kfree(name). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-14ASoC: tegra: always use clk_get() in utility codeStephen Warren
Now that all of the Tegra device trees have been updated to represent the required audio clocks, remove the compatibility code from the Tegra ASoC utility code, and always use clk_get() rather than clk_get_sys(). Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-13ASoC: ep93xx: Use generic dmaengine PCMLars-Peter Clausen
Use the generic dmaengine PCM driver instead of a custom implementation. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-13ASoC: ep93xx: Setup dma data in DAI probeLars-Peter Clausen
This allows us to access the DAI DMA data when we create the PCM. We'll use this when converting ep39xx to generic DMA engine PCM driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-13sound: Fix make allmodconfig on MIPS correctlyPaul Bolle
Commit d4702b189c ("sound: Fix make allmodconfig on MIPS") added a (negative) dependency on ISA_DMA_SUPPORT_BROKEN. Since that Kconfig symbol doesn't exist, this dependency will always evaluate to true. Apparently GENERIC_ISA_DMA_SUPPORT_BROKEN was meant to be used here. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-13ASoC: mxs: move to use generic DMA helperShawn Guo
With mxs-dma converted to generic DMA bindings, let's move mxs-pcm to use it by removing flages SND_DMAENGINE_PCM_FLAG_NO_DT and SND_DMAENGINE_PCM_FLAG_COMPAT. As the result, those mxs custom dma params code can be removed now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-13ASoC: wm8994: Support EFS mode for FLLMark Brown
Later WM8994 devices support an enhanced accuracy FLL divisor mode called EFS which allows more precise selection of fractional source to output ratios. Support this on relevant devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: jz4740-i2s: Use clk_prepare_enable/clk_disable_unprepareLars-Peter Clausen
In preparation to switching the jz4740 clk driver to the common clk framework update the clk enable/disable calls to clk_prepare_enable/clk_disable_unprepare. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: mid-x86: Remove redundant platform_set_drvdata()Sachin Kamat
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: ab8500-codec: Add missing ad_to_slot definitionsFabio Baltieri
According to the AB8500 user manual AD to Slot register multiplexer accept values from 0 to 15 where: 0 to 7 corresponds to AD_OUTx slots 8 to 11 corresponds to zero output 12 to 15 sets the output in tristate mode Update enum_ad_to_slot_map array to reflect this definition. This also allows alsamixer to properly display the default configuration, as all controls are set to tristate (=12) at reset. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: ux500: drop clock gating widgets from machine driverFabio Baltieri
Drop ab8500 clock gating widgets from mop500_ab8500_ctrls, as these bits are already controlled by ab8500 codec driver and should not be exposed to the user. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: ux500: register controls to card instead of codecFabio Baltieri
Update mop500_ab8500_machine_init to register mop500_ab8500_ctrls as card control instead of codec control, as it only contains SOC_DAPM_PIN_SWITCH definitions. Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: SPEAr spdif_{in,out}: use devm for clk and a few more cleanupsUwe Kleine-König
Drop dev_set_drvdata as this is handled in the core and use devm_request_and_ioremap instead of devm_ioremap to properly register the address range used Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: spear: Use generic dmaengine PCMLars-Peter Clausen
Use the generic dmaengine PCM driver instead of a custom implementation. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: spear: Setup dma data in DAI probeLars-Peter Clausen
This allows us to access the DAI DMA data when we create the PCM. We'll use this when converting spear to generic DMA engine PCM driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: spdif_receiver: Add DT support.Marek Belisko
Add devicetree support for this dummy audio soc driver. Signed-off-by: Michal Bachraty <michal.bachraty@streamunlimited.com> Signed-off-by: Marek Belisko <marek.belisko@streamunlimited.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: spdif_transmitter: Add DT support.Marek Belisko
Add devicetree support for this dummy audio soc driver. Signed-off-by: Michal Bachraty <michal.bachraty@streamunlimited.com> Signed-off-by: Marek Belisko <marek.belisko@streamunlimited.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: spdif_transceiver: Change driver filename to spdif_transmitter.c.Marek Belisko
Transceiver usually means receiver + transmitter. This codec can do only transmit. Update driver accordingly. Signed-off-by: Marek Belisko <marek.belisko@streamunlimited.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: sgtl5000: Fix driver probe after resetFabio Estevam
After a 'reboot' command in Linux or after pressing the system's reset button the sgtl5000 driver fails to probe: sgtl5000 0-000a: Device with ID register ffff is not a sgtl5000 sgtl5000 0-000a: ASoC: failed to probe CODEC -19 imx-sgtl5000 sound.12: ASoC: failed to instantiate card -19 imx-sgtl5000 sound.12: snd_soc_register_card failed (-19) sgtl5000 codec does not have a reset line, nor a reset command in software, so after a system reset the codec does not contain the default register values from sgtl5000_reg_defaults[] anymore, as these are only valid after a power-on-reset cycle. Fix this issue by explicitly reading all the reset register values from sgtl5000_reg_defaults[] and writing them back into sgtl5000 to ensure a sane state. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Eric Nelson <eric.nelson@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: sgtl5000: Read SGTL5000_CHIP_ID in i2c_probe()Fabio Estevam
The usual place for reading chip ID is inside i2c_probe, so move it there and also convert it to regmap. sgtl5000_enable_regulators() needs to read the chip revision, so keep the revision check there. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: mxs-sgtl5000: Remove unneeded fields from snd_soc_dai_linkFabio Estevam
It makes no sense to hardcode the I2C bus into the codec_name field. cpu_dai_name and platform_name are also overwritten later in mxs_sgtl5000_probe_dt(). So remove the three fields, as mxs platform is dt-only platform. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: mxs-sgtl5000: Remove unneeded 'ret' variableFabio Estevam
Variable 'ret' is not needed here, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: sgtl5000: Convert to use regmap directlyFabio Estevam
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: sgtl5000: Fix comment about register addressesFabio Estevam
The list below the comment relates to sgtl5000 registers addresses, so change the comment to improve the description. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: Samsung: Remove redundant platform_set_drvdata()Sachin Kamat
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: omap-mcbsp: Remove redundant platform_set_drvdata()Sachin Kamat
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: mxs: mxs-saif: Let device core handle pinctrlFabio Estevam
Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for handling pinctrl. So remove devm_pinctrl_get_select_default() from the driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: jz4740: Remove redundant platform_set_drvdata()Sachin Kamat
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: fsl: imx-audmux: Let device core handle pinctrlFabio Estevam
Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for handling pinctrl. So remove devm_pinctrl_get_select_default() from the driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: mxs-sgtl5000: Remove unneeded fields from snd_soc_dai_linkFabio Estevam
It makes no sense to hardcode the I2C bus into the codec_name field. cpu_dai_name and platform_name are also overwritten later in mxs_sgtl5000_probe_dt(). So remove the three fields, as mxs platform is dt-only platform. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: mxs-sgtl5000: Remove unneeded 'ret' variableFabio Estevam
Variable 'ret' is not needed here, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: imx-sgtl5000: Do not enter the error path on successFabio Estevam
Return on success instead of entering the error path. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12ASoC: ep93xx: Remove redundant platform_set_drvdata()Sachin Kamat
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 02:12:26 +0000