summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2011-10-21Merge branch 'fix/hda' of git://github.com/tiwai/soundLinus Torvalds
* 'fix/hda' of git://github.com/tiwai/sound: ALSA: HDA: conexant support for Lenovo T520/W520 ALSA: hda - Add position_fix quirk for Dell Inspiron 1010
2011-10-18ALSA: HDA: conexant support for Lenovo T520/W520Daniel Suchy
This is patch for Conexant codec of Intel HDA driver, adding new quirk for Lenovo Thinkpad T520 and W520. Conexant autodetection works fine for T520 (similar subsystem ID is used also in W520 model) and detects more mixer features compared to generic (fallback) Lenovo quirk with hardcoded options in Conexant codec. Patch was activelly tested with Linux 3.0.4, 3.0.6 and 3.0.7 without any problems. Signed-off-by: Daniel Suchy <danny@danysek.cz> Cc: <stable@kernel.org> [3.0+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-18ALSA: hda - Add position_fix quirk for Dell Inspiron 1010Takashi Iwai
The previous fix for the position-buffer check gives yet another regression on a Dell laptop. The safest fix right now is to add a static quirk for this device (and better to apply it for stable kernels too). Reported-by: Éric Piel <Eric.Piel@tremplin-utc.net> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-10-04Merge branch 'fix/asoc' of git://github.com/tiwai/soundLinus Torvalds
* 'fix/asoc' of git://github.com/tiwai/sound: ASoC: omap_mcpdm_remove cannot be __devexit ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC ASoC: use a valid device for dev_err() in Zylonite
2011-10-02ASoC: omap_mcpdm_remove cannot be __devexitArnd Bergmann
omap_mcpdm_remove is used from asoc_mcpdm_probe, which is an initcall, and must not be discarded when HOTPLUG is disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-02ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADCAxel Lin
Current code set update bits for WM8753_LDAC and WM8753_RDAC twice, but missed setting update bits for WM8753_LADC and WM8753_RADC. I think it is a copy-paste bug in commit 776065 "ASoC: codecs: wm8753: Fix register cache incoherency". Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-10-02ASoC: use a valid device for dev_err() in ZyloniteArnd Bergmann
A recent conversion has introduced references to &pdev->dev, which does not actually exist in all the contexts it's used in. Replace this with card->dev where necessary, in order to let the driver build again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-09-30ALSA: hda - Fix a regression of the position-buffer checkTakashi Iwai
The commit a810364a0424c297242c6c66071a42f7675a5568 ALSA: hda - Handle -1 as invalid position, too caused a regression on some machines that require the position-buffer instead of LPIB, e.g. resulting in noises with mic recording with PulseAudio. This patch fixes the detection by delaying the test at the timing as same as 3.0, i.e. doing the position check only when requested in azx_position_ok(). Reported-and-tested-by: Rocko Requin <rockorequin@hotmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-27Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-09-27ASoC: ssm2602: Re-enable oscillator after suspendLars-Peter Clausen
Currently the the internal oscillator is powered down when entering BIAS_OFF state, but not re-enabled when going back to BIAS_STANDBY. As a result the CODEC will stop working after suspend if the internal oscillator is used to generate the sysclock signal. This patch fixes it by clearing the appropriate bit in the power down register when the CODEC is re-enabled. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-09-26ALSA: usb-audio: Check for possible chip NULL pointer before clearing ↵Thomas Pfaff
probing flag Before clearing the probing flag in the error exit path, check that the chip pointer is not NULL. Signed-off-by: Thomas Pfaff <tpfaff@gmx.net> Cc: <stable@kernel.org> [2.6.39+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-26ALSA: hda/realtek - Don't detect LO jack when identical with HPTakashi Iwai
The spec->autocfg.line_out_pins[] may contain the same pins as hp_pins[] depending on the configuration. When they are identical, detecting the line_jack_present flag screws up the auto-mute because alc_line_automute() is called unconditionally at initialization while it won't be triggered by unsol events, thus the old line_jack_present flag is kept for the whole run. For fixing this buggy behavior, the driver needs to check whether the line-outs are really individual, and skip if same as headphone jacks. Reference: https://bugzilla.novell.com/show_bug.cgi?id=716104 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-26ALSA: hda/realtek - Avoid bogus HP-pin assignmentTakashi Iwai
When the headphone pin is assigned as primary output to line_out_pins[], the automatic HP-pin assignment by ASSID must be suppressed. Otherwise a wrong pin might be assigned to the headphone and breaks the auto-mute. Reference: https://bugzilla.novell.com/show_bug.cgi?id=716104 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2011-09-24ALSA: HDA: No power nids on 92HD93David Henningsson
This patch is necessary to make internal speakers work on this chip. Cc: stable@kernel.org BugLink: http://bugs.launchpad.net/bugs/854468 Tested-by: Alex Wolfson <alex.wolfson@canonical.com> Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-23Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-09-23ALSA: usb-audio - clear chip->probing on error exitThomas Pfaff
The Terratec Aureon 5.1 USB sound card support is broken since kernel 2.6.39. 2.6.39 introduced power management support for USB sound cards that added a probing flag in struct snd_usb_audio. During the probe of the card it gives following error message : usb 7-2: new full speed USB device number 2 using uhci_hcd cannot find UAC_HEADER snd-usb-audio: probe of 7-2:1.3 failed with error -5 input: USB Audio as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.3/input/input6 generic-usb 0003:0CCD:0028.0001: input: USB HID v1.00 Device [USB Audio] on usb-0000:00:1d.1-2/input3 I can not comment about that "cannot find UAC_HEADER" error, but until 2.6.38 the card worked anyway. With 2.6.39 chip->probing remains 1 on error exit, and any later ioctl stops in snd_usb_autoresume with -ENODEV. Signed-off-by: Thomas Pfaff <tpfaff@gmx.net> Cc: <stable@kernel.org> [2.6.39+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-23ASoC: omap-mcbsp: Do not attempt to change DAI sysclk if stream is activeJarkko Nikula
Attempt to change McBSP CLKS source while another stream is active is not safe after commit d135865 ("OMAP: McBSP: implement functional clock switching via clock framework") in 2.6.37. CLKS parent clock switching using clock framework have to idle the McBSP before switching and then activate it again. This short break can cause a DMA transaction error to already running stream which halts and recovers only by closing and restarting the stream. This goes more fatal after commit e2fa61d ("OMAP3: l3: Introduce l3-interconnect error handling driver") in 2.6.39 where l3 driver detects a severe timeout error and does BUG_ON(). Fix this by not changing any configuration in omap_mcbsp_dai_set_dai_sysclk if the McBSP is already active. This test should have been here just from the beginning anyway. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-09-22ALSA: fm801: Gracefully handle failure of tuner auto-detectBen Hutchings
Commit 9676001559fce06e37c7dc230ab275f605556176 ("ALSA: fm801: add error handling if auto-detect fails") seems to break systems that were previously working without a tuner. As a bonus, this should fix init and cleanup for the case where the tuner is explicitly disabled. Reported-and-tested-by: Hor Jiun Shyong <jiunshyong@gmail.com> References: http://bugs.debian.org/641946 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@kernel.org [v3.0+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-22ALSA: fm801: Fix double free in case of error in tuner detectionBen Hutchings
Commit 9676001559fce06e37c7dc230ab275f605556176 ("ALSA: fm801: add error handling if auto-detect fails") added incorrect error handling. Once we have successfully called snd_device_new(), the cleanup function fm801_free() will automatically be called by snd_card_free() and we must *not* also call fm801_free() directly. Reported-by: Hor Jiun Shyong <jiunshyong@gmail.com> References: http://bugs.debian.org/641946 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@kernel.org [v3.0+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-21ASoC: Ensure we generate a driver nameMark Brown
Commit 873bd4c (ASoC: Don't set invalid name string to snd_card->driver field) broke generation of a driver name for all ASoC cards relying on the automatic generation of one. Fix this by using the old default with spaces replaced by underscores. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Takashi Iwai <tiwai@suse.de>
2011-09-20ASoC: Remove bitrotted wm8962_resume()Mark Brown
This functionality is now subsumed within the bias management, using the standard cache management functionality, without assuming the cache type. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-09-20ALSA: HDA: Add support for IDT 92HD93David Henningsson
Cc: stable@kernel.org BugLink: http://bugs.launchpad.net/bugs/854468 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-19ALSA: hda/realtek - Fix auto-mute with HP+LO configurationTakashi Iwai
When the system has only the headphone and the line-out jacks without speakers, the current auto-mute code doesn't work. It's because the spec->automute_lines flag is wrongly referred in update_speakers(). This flag must be meaningless when spec->automute_hp_lo isn't set, thus they should be always coupled. The patch fixes the problem and add a comment to indicate the relationship briefly. BugLink: http://bugs.launchpad.net/bugs/851697 Reported-by: David Henningsson <david.henningsson@canonical.com> Tested-By: Jayne Han <jayne.han@canonical.com> Cc: stable@kernel.org (3.0) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-16ASoC: bf5xx-ad73311: Fix prototype for bf5xx_probeAxel Lin
Fix below build warning: sound/soc/blackfin/bf5xx-ad73311.c: warning: initialization from incompatible pointer type Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-15ALSA: pcm - fix race condition in wait_for_avail()Arjan van de Ven
wait_for_avail() in pcm_lib.c has a race in it (observed in practice by an Intel validation group). The function is supposed to return once space in the buffer has become available, or if some timeout happens. The entity that creates space (irq handler of sound driver and some such) will do a wake up on a waitqueue that this function registers for. However there are two races in the existing code 1) If space became available between the caller noticing there was no space and this function actually sleeping, the wakeup is missed and the timeout condition will happen instead 2) If a wakeup happened but not sufficient space became available, the code will loop again and wait for more space. However, if the second wake comes in prior to hitting the schedule_timeout_interruptible(), it will be missed, and potentially you'll wait out until the timeout happens. The fix consists of using more careful setting of the current state (so that if a wakeup happens in the main loop window, the schedule_timeout() falls through) and by checking for available space prior to going into the schedule_timeout() loop, but after being on the waitqueue and having the state set to interruptible. [tiwai: the following changes have been added to Arjan's original patch: - merged akpm's fix for waitqueue adding order into a single patch - reduction of duplicated code of avail check ] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-09-14ALSA: HDA: Cirrus - fix "Surround Speaker" volume control nameDavid Henningsson
This patch fixes "Surround Speaker Playback Volume" being cut off. (Commit b4dabfc452a10 was probably meant to fix this, but it fixed only the "Switch" name, not the "Volume" name.) Signed-off-by: David Henningsson <david.henningsson@canonical.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-13ALSA: hda - Terminate the recursive connection search properlyTakashi Iwai
The recursive search of widget connections in snd_hda_get_conn_index() must be terminated at the pin and the audio-out widgets. Otherwise you'll get "too deep connection" warnings unnecessarily. Reported-by: Francis Moreau <francis.moro@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-12ASoC: Fix trivial build regression in Kirkwood I2SArnd Bergmann
A fix merged in 3.1-rc2 introduced a small regression, this should get it to build again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-05ASoC: Blackfin: bf5xx-ad193x: Fix codec device nameLars-Peter Clausen
Fix the codec_name field of the dai_link to match the actual device name of the codec. Otherwise the card won't be instantiated. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-09-05ASoC: Fix reporting of partial jack updatesMark Brown
We need to report the entire jack state to the core jack code, not just the bits that were being updated by the caller, otherwise the status reported by other detection methods will be omitted from the state seen by userspace. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-08-31ASoC: imx: Fix build warning of unused 'card' variableFabio Estevam
Fixes the following warning: CC sound/soc/imx/imx-pcm-fiq.o sound/soc/imx/imx-pcm-fiq.c: In function 'imx_pcm_fiq_new': sound/soc/imx/imx-pcm-fiq.c:243: warning: unused variable 'card' CC sound/soc/imx/imx-pcm-dma-mx2.o Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-31ASoC: Fix register cache sync register_writable WARN_ONsLars-Peter Clausen
Currently the condition for these WARN_ONs is reversed and they are placed before the actual check whether we are going to write to that register. So if the codec implements the register_writable callback we'll get a warning for each writable register when syncing the register cache. While we are at it change the check to use snd_soc_codec_writable_register instead of open-coding it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-31ASoC: snd_soc_codec_{readable,writable}_register change default to trueLars-Peter Clausen
Change the default return value of snd_soc_codec_{readable,writable}_register to true when no codec specific callback for this function is given. Otherwise all registers of that codec will neither be readable nor writable, which is most certainly not what we want. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-31ASoC: soc-dapm: Fix parameter comment for snd_soc_dapm_freePeter Ujfalusi
We have dapm_context instead of codec parameter. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-26Merge branch 'fix/asoc' into for-linusTakashi Iwai
2011-08-25ALSA: hda: Conexant: Allow different output types to share DACDavid Henningsson
Headphones has stopped working for the original reported (a regression compared to 2.6.38). This is because Speaker and Headphones share the same DAC, in which case no Headphones volume control was created. This patch fixes so that both Speaker and Headphones volume controls are created in such scenario. BugLink: http://bugs.launchpad.net/bugs/817943 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-24ASoC: MPC5200: replace of_device with platform_deviceTimur Tabi
'struct of_device' no longer exists, and its functionality has been merged into platform_device. Update the MPC5200 audio DMA driver (mpc5200_dma) accordingly. This fixes a build break. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-08-24ASoC: Correct element count for WM8996 sidetone HPFMark Brown
I can count. Honest. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-24ASoC: Tegra: wm8903 machine driver: Drop Ventana supportStephen Warren
Board file support for Ventana is not yet mainlined, and probably won't ever be given the move to Device-Tree. Consequently, the Ventana entry is being removed from arch/arm/tools/mach-types in the next merge window, since it was registered over a year ago. This will also remove function machine_is_ventana(), which is used by the ASoC Tegra WM8903 machine driver. This will cause compilation failures. Drop Ventana support to resolve this. Hopefully, in the not-too-distant future, tegra_wm8903.c will be able to configure itself from Device-Tree, and hence we'll be able to re-instate Ventana support just by creating a .dts file for the board. Also note that Aebl support is in a similar boat. However, that board isn't scheduled for deprecation for at least another 5 months, and perhaps we will have completely removed non-Device-Tree support from tegra_wm8903.c by then and/or adjusted mach-types policy. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-24ASoC: Add Springbank I/O card to Speyside KconfigJoseph Pentland
Signed-off-by: Joseph Pentland <jp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-24ALSA: hda/conexant - Enable ADC-switching for auto-mic mode, tooTakashi Iwai
The ADC-switching can work also in the auto-mic mode, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23ALSA: hda - Fix double-headphone/speaker paths for Cxt auto-parserTakashi Iwai
When multiple headphones or speakers are assigned but no individual DACs are available, the driver should take the first HP/SPK DAC instead of another primary output. The patch adds a bit-flag to dac field of struct pin_dac_pair indicating that it's a slave DAC. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23ALSA: hda - Update jack-sense info even when no automute is setTakashi Iwai
The internal states, jack_present and line_jack_present should be updated upon unsolicited events even if no automute is set. Otherwise the wrong state is referred when the automute behavior is changed by the mixer control. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-23ALSA: hda - Fix output-path initialization for Realtek auto-parserTakashi Iwai
When the headphone or speaker output has no own DAC, initialize the path using the primary DAC. Otherwise the path won't be set properly and can result in the silence. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-22sound/soc/fsl/mpc8610_hpcd.c: add missing of_node_putJulia Lawall
The first change is to add an of_node_put, since codec_np has previously been allocated. The rest of the patch reorganizes the error handling code so the only code executed is that which is needed. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; expression E1!=0,E2,E3,E4; statement S; iterator I; @@ ( if (...) { ... when != of_node_put(x) when != x = E3 when != E3 = x * return ...; } ... when != x = E2 when != I(...,x,...) S if (...) { ... when != x = E4 of_node_put(x); ... return ...; } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22sound/soc/fsl/p1022_ds.c: add missing of_node_putJulia Lawall
dma_channel_np has been accessed at this point, so decrease its reference count before leaving the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; expression E1!=0,E2,E3,E4; statement S; iterator I; @@ ( if (...) { ... when != of_node_put(x) when != x = E3 when != E3 = x * return ...; } ... when != x = E2 when != I(...,x,...) S if (...) { ... when != x = E4 of_node_put(x); ... return ...; } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22sound/soc/ep93xx/ep93xx-i2s.c: add missing kfreeJulia Lawall
Introduce a new label that includes kfree and jump to that one. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; expression E1!=0,E2,E3,E4; statement S; iterator I; @@ ( if (...) { ... when != kfree(x) when != x = E3 when != E3 = x * return ...; } ... when != x = E2 when != I(...,x,...) S if (...) { ... when != x = E4 kfree(x); ... return ...; } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Alexander Sverdlin <subaparts@yandex.ru> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22sound/soc/kirkwood/kirkwood-i2s.c: add missing kfreeJulia Lawall
Adjust the goto to jump to the error handling code that includes kfree. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; expression E1!=0,E2,E3,E4; statement S; iterator I; @@ ( if (...) { ... when != kfree(x) when != x = E3 when != E3 = x * return ...; } ... when != x = E2 when != I(...,x,...) S if (...) { ... when != x = E4 kfree(x); ... return ...; } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22ASoC: soc-core: use GFP_KERNEL flag for kmalloc in snd_soc_cnewAxel Lin
GFP_ATOMIC is not needed here, use GFP_KERNEL instead. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>