summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2010-01-25Merge branch 'fix/hda' into for-linusTakashi Iwai
2010-01-25ASoC: fix a memory-leak in wm8903Guennadi Liakhovetski
Remember to free the temporary register-cache. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2010-01-25ALSA: hda - add possibility to choose speakers configuration for 4930gŁukasz Wojniłowicz
Now one can choose speaker configuration in e.g. PulseAudio mixer Signed-off-by: Łukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-20ALSA: hda - Fix HP T5735 automuteTakashi Iwai
This patch fixes the aut-mute setup on HP T5735 with ALC262 codec. Instead of wrong amp, use pin control toggling for muting the speaker now. Tested-by: Lee Trager <lee.trager@hp.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-19ALSA: hda - Turn on EAPD only if available for Realtek codecsTakashi Iwai
Some codecs disable widgets used for output pins and reserve as vendor- spec widgets. Thus we need to check the widget type and pin cap before actually sending SET_EAPD verbs in the auto-configuration mode. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-19ALSA: hda - Fix parsing pin node 0x21 on ALC259Takashi Iwai
ALC259 has a widget NID 0x21 for the output pin, but it wasn't handled properly in alc268_new_analog_output(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-18Merge branch 'fix/hda' into for-linusTakashi Iwai
2010-01-18ALSA: Remove warning message for invalid OSS minor rangesTakashi Iwai
When a card instance with a higher card number is registered, warning messages are spewed eventually with stack traces due to the invalid minor number for OSS device registration. For example, thinkpad-acpi registers the card number 29 as default, and you'll see always these messages. This is rather confusing (and worries users), thus better to return simply the error code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-17ALSA: hda - Fix capture on Sony VAIO with single inputTakashi Iwai
Sony VAIO VGN-P11G with ALC262 codec has only one input pin, and the recording doesn't work with model=auto because ALC262 parser sets the wrong cap NIDs to choose the route and the default route for the sole input pin wasn't initialized properly. This patch solves these issues. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-15ALSA: hda - Fix mute led GPIO on HP dv-series notebooksKunal Gangakhedkar
On my laptop (HP dv6-1110ax), there are no OEM strings in SMBIOS of type "HP_Mute_LED*". Hence, the GPIO for the mute button LED doesn't get set properly. I didn't find the strings in my cousin's laptop (HP dv9500t CTO) either. As per the documentation of find_mute_led_gpio(), these strings occur in HP B-series systems - so, before scanning the SMBIOS strings, we need to check if we're dealing with a B-series system. Need to get confirmation from HP if this logic takes care of all the systems. I'm trying to poke a friend there. Signed-off-by: Kunal Gangakhedkar <kunal.gangakhedkar@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-14ALSA: use subsys_initcall for sound core instead of module_initThadeu Lima de Souza Cascardo
This is needed for built-in drivers which are built before the sound directory, like thinkpad_acpi. Otherwise, registering a card fails. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-14ALSA: hda - Fix missing capture mixer for ALC861/660 codecsTakashi Iwai
The capture-related mixer elements are missing with ALC861/ALC660 codecs when quirks are present, due to missing call of set_capture_mixer(). Reference: Novell bnc#567340 http://bugzilla.novell.com/show_bug.cgi?id=567340 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2010-01-13ALSA: hda - Improved MacBook (Pro) 5,1 / 5,2 supportAlex Murray
This patch adds support for automatically muting the speakers when headphones are inserted, as well as relabelling the headphone widgets from the non-standard "HP" to the standard "Headphone" for the mb5 model. Signed-off-by: Alex Murray <murray.alex@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-13ALSA: hda - Fix Toshiba NB20x quirk entryTakashi Iwai
The alc664-mode4 model doesn't seem to fit with Toshiba NB205 correctly. NB205 uses the pin 0x17 connected with the mixer 0x0f for the speaker output, which isn't controlled by mode4 model at all. Rather model=auto works fine as is on the latest driver, so let it back again. Tested-by: Nickolas Lloyd <ultrageek.lloyd@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-01-12Merge branch 'fix/asoc' into for-linusTakashi Iwai
2010-01-12Merge branch 'fix/hda' into for-linusTakashi Iwai
2010-01-12ALSA: hda - Fix ALC861-VD capture source mixerTakashi Iwai
The capture source or input source mixer element wasn't created properly for ALC861-VD codec due to the wrong NID passed to alc_auto_create_input_ctls(). References: Novell bnc#568305 http://bugzilla.novell.com/show_bug.cgi?id=568305 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2010-01-12Merge remote branch 'alsa/fixes' into fix/miscTakashi Iwai
2010-01-10ALSA: ac97: add AC97 STMicroelectronics' codecsKrzysztof Helt
Add the STMicroelectronics ST7597 codec and an unknown codec from the same manufacturer found on the Creative SB 128 card (CT4810). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-10ALSA: ac97: Add Dell Dimension 2400 to Headphone/Line Jack Sense blacklistDaniel T Chen
This model needs both 'Headphone Jack Sense' and 'Line Jack Sense' muted for audible playback, so just add it to the ad1981 jack sense blacklist. Cc: stable@kernel.org Tested-by: Pete <x41215201@gmail.com> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-08ASoC: Fix WM8350 DSP mode B configurationMark Brown
We need to set the LRCLK inversion bit to select DSP mode. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2010-01-08sbawe: fix memory detection part 2Krzysztof Helt
The patch "sbawe: fix memory detection" fixed detection for memoryless SB32 cards but broke detection of memory above 512KB. This patch fixes the regression. The patch has been tested on the SB32 card (CT3670) with 0MB, 2MB and 8MB memory installed. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-08Merge branch 'master' of ↵Jaroslav Kysela
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into fixes
2010-01-08sound: oss: off by one bugDan Carpenter
The problem is that in the original code sound_nblocks could go up to 1024 which would be an array overflow. This was found with a static checker and has been compile tested only. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-01-05Merge branch 'for-2.6.33' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 * 'for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6: ASoC: fixup oops in generic AC97 codec glue ASoC: fix params_rate() macro use in several codecs ASoC: fsi-ak4642: Remove ak4642_add_i2c_device
2010-01-04ASoC: fixup oops in generic AC97 codec glueManuel Lauss
Initialize the glue by calling snd_soc_new_ac97_codec() as is done in other ASoC AC97 codecs. Fixes an oops caused by dereferencing uninitialized members in snd_soc_new_pcms(). Run-tested on Au1250. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-28ALSA: usb-audio - Avoid Oops after disconnectTakashi Iwai
As the release of substreams may be done asynchronously from the disconnection, close callback needs to check the shutdown flag before actually accessing the usb interface. Reference: Novell bnc#505027 http://bugzilla.novell.com/show_bug.cgi?id=565027 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-28ALSA: test off by one in setsamplerate()Roel Kluin
With `while (i++ < MAX_WRITE_RETRY)' i reaches MAX_WRITE_RETRY + 1 after the loop Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-28ALSA: atiixp: Specify codec for Foxconn RC4107MA-RS2Daniel T Chen
BugLink: https://bugs.launchpad.net/ubuntu/+bug/498863 This mainboard needs ac97_codec=0. Cc: stable@kernel.org Tested-by: Apoorv Parle <apparle@yahoo.co.in> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-27Merge branch 'fix/hda' into for-linusTakashi Iwai
2009-12-27ALSA: hda - Fix Oops at reloading beep devicesTakashi Iwai
The recent change for supporting dynamic beep device allocation caused a problem resulting in Oops at reloading the driver. Also, it ignores the error from input device registration. This patch fixes the wrong check in snd_hda_detach_beep_device(), and returns an error when the input device registration fails properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-27ALSA: hda - Don't cache beep controlsTakashi Iwai
The beep control verbs don't need to be cached for resume. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-26Merge commit 'v2.6.33-rc2' into for-2.6.33Mark Brown
2009-12-26ALSA: sound/arm: Fix build failure caused by missing struct aaci definitionPeter Huewe
This patch fixes a build failure introduced by the patch ALSA: AACI: factor common hw_params logic into aaci_pcm_hw_params [1] by adding/moving the aaci struct to the right position. The patch mentioned above merged common source parts into one function, but unfortunately left out the aaci struct and consequently caused a build failure e.g. for arm versatile_config [2] References: [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=d3aee7996c30f928bbbbfd0994148e35d2e83084 [2] http://kisskb.ellerman.id.au/kisskb/buildresult/1893605/ Patch against Linus' tree. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-25ALSA: hda - use snd_hda_jack_detect() again in patch_sigmatel.cTakashi Iwai
Use snd_hda_jack_detect() again for jack-sensing. The triggering problem can be worked around with codec->no_trigger_sense flag now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-25ALSA: hda - Disable tigger at pin-sensing on AD codecsTakashi Iwai
Analog Device codecs seem to have problems with the triggering of pin-sensing although their pincaps give the trigger requirements. Some reported that constant CPU load on HP laptops with AD codecs. For avoiding this regression, add a flag to codec struct to notify explicitly that the codec doesn't suppot the trigger at pin-sensing. Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-25ALSA: hda - HDMI sticky stream tag supportWu Fengguang
When we run the following commands in turn (with CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0), speaker-test -Dhw:0,3 -c2 -twav # HDMI speaker-test -Dhw:0,0 -c2 -twav # Analog The second command will produce sound in the analog lineout _as well as_ HDMI sink. The root cause is, device 0 "reuses" the same stream tag that was used by device 3, and the "intelhdmi - sticky stream id" patch leaves the HDMI codec in a functional state. So the HDMI codec happily accepts the audio samples which reuse its stream tag. The proposed solution is to remember the last device each azx_dev was assigned to, and prefer to 1) reuse the azx_dev (and hence the stream tag) the HDMI codec last used 2) or assign a never-used azx_dev for HDMI With this patch and the above two speaker-test commands, HDMI codec will use stream tag 8 and Analog codec will use 5. The stream tag used by HDMI codec won't be reused by others, as long as we don't run out of the 4 playback azx_dev's. The legacy Analog codec will continue to use stream tag 5 because its device id is 0 (this is a bit tricky). Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-25ALSA: Fix indentation in pcm_native.cGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-24ASoC: fix params_rate() macro use in several codecsGuennadi Liakhovetski
Sevelar ASoC codec drivers wrongly assume, that the params_rate() macro returns one of SNDRV_PCM_RATE_* defines instead of the actual numerical sampling rate. Fix them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-12-24ASoC: fsi-ak4642: Remove ak4642_add_i2c_deviceKuninori Morimoto
I2C devices should be registered when platform board setting in latest ASoC. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-23Merge branch 'fix/hda' into for-linusTakashi Iwai
2009-12-23Merge branch 'fix/asoc' into for-linusTakashi Iwai
2009-12-23Merge branch 'fix/misc' into for-linusTakashi Iwai
2009-12-23ALSA: hda - Add STAC9205 PCI_QUIRK for Dell Vostro 1700Anisse Astier
Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-23ASoC: Do not write to invalid registers on the wm9712.Eric Millbrandt
This patch fixes a bug where "virtual" registers were being written to the ac97 bus. This was causing unrelated registers to become corrupted (headphone 0x04, touchscreen 0x78, etc). This patch duplicates protection that was included in the wm9713 driver. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-12-23ALSA: hda - Set mixer name after codec patchTakashi Iwai
Postpone the mixer name setup after the codec patch since the codec patch may change the codec name string in itself. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-22ASoC: add missing parameter to mx27vis_hifi_hw_free()Guennadi Liakhovetski
Commit 2ccafed4 added an extra parameter to the DAI .set_pll() method, but it missed this call in sound/soc/imx/mx27vis_wm8974.c. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-22ASoC: sh: FSI:: don't check platform_get_irq's return value against zeroUwe Kleine-König
platform_get_irq returns -ENXIO on failure, so !irq was probably always true. Better use (int)irq <= 0. Note that a return value of zero is still handled as error even though this could mean irq0. This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that changed the return value of platform_get_irq from 0 to -ENXIO on error. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-12-22ALSA: sound/core/pcm_timer.c: use lib/gcd.cFlorian Fainelli
Make sound/core/pcm_timer.c use lib/gcd.c Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-12-22ALSA: hda - Add MSI blacklistTakashi Iwai
A machine with AMD CPU with Nvidia board doesn't work with MSI. Reported-by: Robert J. King <peritus@gurunetwork.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-06 02:48:42 +0000