| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
|
|
There is no code enabling DMIC clock in systems that don't provide platform
data for rt5640 after commit 71d97a794301 ("ASoC: rt5640: Use the platform
data for DMIC settings").
I think it's worth to keep this static DMIC clock and alternative data pin
setting during probe time. For making possible to use DMIC from ACPI probed
machine (prior ACPI 5.1 with _DSD) this patch moves DMIC configuration to
new exported rt5640_dmic_enable() that machine drivers can call.
Please note, this patch moves DMIC configuration from i2c probe to codec
probe in case platform data for rt5640 is set.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the board is sent to suspend (deep sleep) the McASP context will be lost.
In case when suspend happens during active audio we need to save and restore
more registers, which was configured during hw_param times as well.
We need to add more config registers, AFIFO control registers and we also
need to save and restore the serializer configuration as well.
Since the number of serializers depends on the SoC we need to allocate the
memory for it based on the num_serializer for the given McASP instance.
With this patch the ongoing stream will resume after resuming from deep
sleep.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of individual values use an array to store the registers need to be
saved on suspend and restored on resume.
It is going to be easier to add more registers to save and restore.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fix SSM2602 device identification
Another fix for v3.17, fixing device identification after the split out
of the I2C and SPI code.
|
|
There is no need to use 'i2s-slave' property, since master/slave configuration
are passed via machine layer.
This change does not break existing users because they do check for slave
mode inside sound/soc/fsl/mpc8610_hpcd.c/p1022_ds.c/p1022_rdk.c
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This adds the necessary values to the constraint list and
register values to the coefficient table in order to
configure the device for 11.025kHz and 22.5kHz sample rates.
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
|
|
Allow the ssm2602/ssm2603/ssm2604 codec driver to be
instantiated from the device tree.
Also, add Kconfig prompts to allow manual selection of both the
I2C and SPI configuration versions of the driver.
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
|
|
The correct type (SSM2602/SSM2603/SSM2604) is passed down
from the ssm2602_spi_probe()/ssm2602_spi_probe() functions,
so use that instead of hardcoding it to SSM2602 in
ssm2602_probe().
Fixes: c924dc68f737 ("ASoC: ssm2602: Split SPI and I2C code into different modules")
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: stable@vger.kernel.org
|
|
pr_* macros replaced with dev_* as they are more preffered over pr_*.
each file which had pr_* was reviewed manually and replaced with dev_*.
here we have actually used the various snd_card which was added to some
structures of ctxfi via a previous patch of this series.
in the ctvmem.c file we have passed a reference of ct_atc as an
argument to get_vm_block function so that it can be used from
dev_*.
since dev_* will print the device information , so the prefix of
"ctxfi" from the various pr_* were also removed.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
added reference of the card in the convert_format function
so that we can know which card has called the function.
this reference of the snd_card will actually be used in a later patch
to convert the pr_* macro to dev_*.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
initialized the reference of snd_card which was added to the various
structures through the previous patch of the series.
these references of snd_card will be used in a later patch to convert
the pr_* macros to dev_*
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
added a pointer of snd_card in some of the structures to get a
reference of the card from other functions.
these references of snd_card will be initialised in the next patch
of this series and as of now these snd_card will be used to print the
the device information when we convert the pr_* macros to dev_* in a
later patch of this series.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
the previous patch of the series has converted the void * to
struct hw * . Now this patch removes the typecasting to (struct hw *)
which is not needed any more.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
in the code we have void *hw and while using we are always typecasting
it to (struct hw *). it is better to use void type of pointer when we
store different types of pointer , but in this code we are only having
struct hw.
So changed all the relevant reference of void *hw to struct hw *hw,
without any modification of the existing code logic.
the next patch of the series will remove the typecasting which is
not required now.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v3.17
A few small driver specific fixes and a couple of error handling fixes
in the core.
|
|
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Asus T100 internal microphone is not digital but analogue connected to IN1P
pin of the RT564x codec with shared bias between internal and headset
microphones. Because of this there is need to have machine specific DAPM
routes in byt-rt5640.
Add handling for them with the help of DMI quirk that is used to add custom
routes in addition to common. Because "Internal Mic" connected to DMIC1 is
not common to all move it as a default custom route when there is no match
in quirk table.
Custom "Internal Mic" -> "IN1P" with MICBIAS1 route is added for Asus T100.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
I tested couple byt-rt5640 based platforms and they have single-ended
headset microphone connection to IN2P only. I guess IN2N was either defined
by accident or some early platform had floating ground for headset. It's
better to remove IN2N and add a custom route for such a platform if needed.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The only remaining user of the CODEC pointer in the DAPM struct is to
initialize the CODEC pointer in the widget struct. The later is scheduled
for removal, but has still a few users left. For now use
dapm->component->codec to initialize it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The CODEC struct in the snd_soc_dapm_context struct is deprecated and
scheduled for removal. Use the snd_soc_dapm_to_codec() function instead.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The CODEC struct in the snd_soc_dapm_context struct is deprecated and
scheduled for removal. Use the snd_soc_dapm_to_codec() function instead.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It is possible to configure a kernel with SND_DAVINCI_SOC=m and
SND_DM365_VOICE_CODEC=y, which results in a link error:
sound/built-in.o: In function `davinci_vcif_probe':
sound/soc/davinci/davinci-vcif.c:223: undefined reference to `davinci_soc_platform_register'
The best way to avoid this is to make SND_DM365_VOICE_CODEC
a tristate option that depends on SND_DAVINCI_SOC, so it
can only be a module or disabled when the base driver is
a loadable module
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'asoc/fix/core', 'asoc/fix/fsl-ssi' and 'asoc/fix/rt286' into asoc-linus
|
|
All byt-max98090 audio connections are known and described in DAPM routing
table. Set the fully_routed flag in order to disable unused codec pins.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
|
|
According to MAX98090 specification "Digital microphone clock (DMC) is
enabled once both data channels are enabled.". Therefore both digital
microphone data channels must be enabled also when using mono microphone
configuration.
Fix this by moving "DMICL_ENA" and "DMICR_ENA" supply widgets from "DMICL"
and "DMICR" inputs to "DMIC Mux" in order to enable both data channels
whenever there is active mono or stereo digital microphone input path.
Use of "DMICL" and "DMICR" inputs are retained for informative source and in
case the driver would find use for exact digital microphone configuration in
the future.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since we cannot make sure the 'params->num_regs' will always be none
zero here, and then if it equals to zero, the kmemdup() will return
ZERO_SIZE_PTR, which equals to ((void *)16).
So this patch fix this with just doing the zero check before calling
kmemdup().
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
Analog Devices SSM4567 is a boost class-D audio amplifier.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We try to write index registers into cache when we write an index
register, but we change the reg value before updating the cache.
As a result, the cache is never be updated. This patch will fix
this issue.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
This patch corrects some incorrect default value in the cache.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
Some arizona devices have a second asynchronous sample rate, add the
registers necessary to support this.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
This driver has no suspend callback.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When we have PCM (FE/BE) opened or DAPM widgets triggered we need power
up/down DSP accordingly. The DSP will do ref count of these requests
i.e. link these runtime_get/put calls of DSP
Also fix some preexisting spacing error.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes:
Adds 3 new PHY drivers stih407, stih41x and rcar gen2 PHY. It also
includes miscellaneous cleanup of other PHY drivers.
Conflicts:
MAINTAINERS
|
|
Fix double unlock of fe card mutex introduced by patch 8f70e515a8bb
"ASoC: soc-pcm: fix dpcm_path_get error handling"
The first unlock is at line 106, and the unlock is at line 149. we
should remove the first unlock.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some boards have this pin statically tied and do not require any configuration,
some other boards allow to enable chip using GPIO.
Add an option that tells which GPIO is used to power the audio codec.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no other use for extmic_mux than setting it to zero so remove it.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
struct max98090_priv member irq is now used only locally in
max98090_i2c_probe() and can be removed.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Keep MAX98090 interrupt requested after i2c device probing as long as the
driver is loaded. This fixes the issue where subsequent codec probe
max98090_probe() call fails in interrupt request since interrupt wasn't
freed over codec remove-reprobe cycle.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This fixes a bug when using the SOC_DOUBLE_R_RANGE_TLV macro in
the invert mode. In the non-invert case, e.g.
SOC_DOUBLE_R_RANGE_TLV("<name>", <reg_l>, <reg_r>,
0, 40, 255, 0, <tlv>)
the range sent to the hardware is 40..255, but in the invert case:
SOC_DOUBLE_R_RANGE_TLV("<name>", <reg_l>, <reg_r>,
0, 40, 255, 1, <tlv>)
the range 215..0 was being sent to the hardware. This commit
corrects this to 255..40 so it is consistent with the non-invert
case.
Signed-off-by: Howard Mitchell <hm@hmbedded.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
USB hub has started to use a workqueue instead of kthread. Let's update
the documentation and comments here and there.
This patch mostly just replaces "khubd" with "hub_wq". There are only few
exceptions where the whole sentence was updated. These more complicated
changes can be found in the following files:
Documentation/usb/hotplug.txt
drivers/net/usb/usbnet.c
drivers/usb/core/hcd.c
drivers/usb/host/ohci-hcd.c
drivers/usb/host/xhci.c
Signed-off-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fixed sparse warning of incorrect type (different address spaces) in
cthw20k1.c and cthw20k2.c which was being actually caused as mem_base
was of the type unsigned long.
Again as mem_base was previously unsigned long , so it required many
typecasts in the code to convert interger to pointer.
Now after giving the correct type of mem_base as void __iomem *
we can also remove those typecasts maintaining the same functionality
and logic of the code.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If one input has a boost and another one has not, and they're equal
otherwise, it's more likely you want to use the input with the boost
as your primary input.
See hda-emu.git/codecs/canonical/cx20590-lenovo-20b2z00bus-ccert-201305-13496
for an example.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The next patch will use it, so make it visible across modules.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit e3f205a72c45 ("ASoC: Remove locking in
snd_soc_{new,free}_ac97_codec()") overlooked a unlock on one of the error
paths.
Fixes: e3f205a72c45 ("ASoC: Remove locking in snd_soc_{new,free}_ac97_codec()")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since every caller of snd_hda_jack_detect_enable_callback needs to
use the macros from err.h, it makes sense to include it directly
from hda_jack.h.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
code can raise a panic when the ssi_private->pdev is null
[...]
/*
* If codec-handle property is missing from SSI node, we assume
* that the machine driver uses new binding which does not require
* SSI driver to trigger machine driver's probe.
*/
if (!of_get_property(np, "codec-handle", NULL))
goto done;
[...]
ssi_private->pdev =
platform_device_register_data(&pdev->dev, name, 0, NULL, 0);
[...]
done:
if (ssi_private->dai_fmt)
_fsl_ssi_set_dai_fmt(ssi_private, ssi_private->dai_fmt);
Proposal was to not use ssi_private->pdev->dev here but adding a new parameter
of *dev pointer to this _set_dai_fmt() -- passing pdev->dev in probe() and
cpu_dai->dev in fsl_ssi_set_dai_fmt().
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reported-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
