summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2014-11-25ASoC: Intel: Fix stream volume set no effect issue on BroadwellJie Yang
The volume setting control for capture stream doesn't take effect on intel Broadwell platform. Root cause it at 2 points: 1. set stream volume with channel=2 is wrongly bapassed; 2. the saved stream volume should be restored after stream is commit. Here correct these 2 items to fix the stream volume set issue. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25ASoC: fsl-asoc-card: Add slot_width setting for cpu-daiNicolin Chen
ESAI may need to use fixed slot width to comply with external CODEC. So this set_tdm_slot() call will allow the ESAI driver to override its default dynamic slot width policy. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25ASoC: fsl_esai: Use dynamic slot width as defaultNicolin Chen
The driver previously used 32-bit fixed slot width as default. In result, ESAI might use 32-bit length to capture 16-bit width audio slot from CODEC side when ESAI is running as DAI slave. So this patch just removes the default slot_width so as to use dynamic slot width. If there comes a specific situation that needs a fixed width, the machine driver shall set slot_width via set_tdm_slot() so as to let the ESAI driver replace the dynamic width policy with the fixed value. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25ASoC: rt5677: Fix the issue that the regmap_range "rt5677_ranges" cannot be ↵Oder Chiou
accessed After the patch "ASoC: rt5677: Use specific r/w function for DSP mode", the regmap_range "rt5677_ranges" was not registered in rt5677_regmap_physical, and it caused that the regmap_range "rt5677_ranges" cannot be accessed by the specific r/w function. The patch fixes this issue. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25ASoC: rt5670: add DMIC ASRC supportBard Liao
This patch will enable ASRC for DMIC if ASRC is useable. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25ASoC: rt5670: check if asrc is useableBard Liao
To use ASRC, the sysclk should be faster than 384 times sample rate of I2S1. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25ASoC: rt5645: multiple JD mode supportBard Liao
There are 3 JD modes in RT5645. This patch configure register values according to platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25ASoC: sigmadsp: fix simple_return.cocci warningskbuild test robot
sound/soc/codecs/sigmadsp.c:656:1-4: WARNING: end returns can be simpified and declaration on line 636 can be dropped Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: rockchip: i2s: Fix Kconfig for I2S device driverAndreas Ruprecht
Currently, CONFIG_SND_SOC_ROCKCHIP_I2S could also be selected without having CONFIG_SND_SOC_ROCKCHIP enabled. As this makes no sense, a Kconfig dependency is added to CONFIG_SND_SOC_ROCKCHIP_I2S. This will make the item visible only if CONFIG_SND_SOC_ROCKCHIP is enabled. Additionally, as the code connected to CONFIG_SND_SOC_ROCKCHIP_I2S depends on CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM, the dependency is moved to reflect this more clearly. Signed-off-by: Andreas Ruprecht <rupran@einserver.de> Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: tlv320aic31xx: Fix off by one error in the loop stucture.Jyri Sarha
Fix off by one read beyond the end of a table. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-11-24ASoC: wm9713: Cleanup manual bias level transitionsLars-Peter Clausen
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm9712: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend. This makes the code a bit shorter and cleaner. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm9090: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm9081: Cleanup manual bias level transitionsLars-Peter Clausen
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8995: Cleanup manual bias level transitionsLars-Peter Clausen
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8994: Cleanup manual bias level transitionsLars-Peter Clausen
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8993: Cleanup manual bias level transitionsLars-Peter Clausen
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8991: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8990: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8988: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Also remove the regcache_mark_dirty() from the suspend handler since it is already called by the ASoC core. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8985: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8974: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8978: Cleanup manual bias level transitionsLars-Peter Clausen
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8983: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8961: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8960: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8955: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Also remove the regcache_mark_dirty() from the suspend handler since this is already done by the ASoC core. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8940: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8903: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Also remove the unused codec field from the wm8903_priv struct so we can remove the whole probe callback. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8900: Cleanup manual bias level transitionsLars-Peter Clausen
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8804: Cleanup manual bias level transitionsLars-Peter Clausen
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8776: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8750: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8737: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8731: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8728: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8711: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Also remove the extra write that sets the WM8711_ACTIVE register to 0x00 in the suspend handler since this write is already done when transitioning to SND_SOC_BIAS_OFF. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8580: Cleanup manual bias level transitionsLars-Peter Clausen
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8523: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8510: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8400: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual asynchronous transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Also running this asynchronously has the problem of potential race conditions with the core. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: wm8350: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: rt5631: Cleanup bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: alc5632: Cleanup bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: alc5623: Cleanup bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Also remove the manual sequencing back to SND_SOC_BIAS_ON in resume as this is already handled by the ASoC core. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: uda1380: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: uda134x: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: uda134x: Remove is_powered_on_standby from platform dataLars-Peter Clausen
According to its documentation the is_powered_on_standby field of the uda134x platform data is supposed to prevent the the driver from shutting down the ADC and DAC in standby mode. This behavior was broken in commit commit f0fba2ad1b6b ("ASoC: multi-component - ASoC Multi-Component Support") almost 5 years ago and all the flag does now is cause the driver to go to SND_SOC_BIAS_ON in probe, just for the ASoC core to put it back into SND_SOC_BIAS_STANDBY right after probe. Apparently the intended behavior has not been missed, so just remove is_powered_on_standby from the platform data struct. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: max98090: Fix right sidetone connectionJarkko Nikula
It is right not left sidetone which goes to "DACR". Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24ASoC: max98090: Fix ill-defined sidetone routeJarkko Nikula
Commit 5fe5b767dc6f ("ASoC: dapm: Do not pretend to support controls for non mixer/mux widgets") revealed ill-defined control in a route between "STENL Mux" and DACs in max98090.c: max98090 i2c-193C9890:00: Control not supported for path STENL Mux -> [NULL] -> DACL max98090 i2c-193C9890:00: ASoC: no dapm match for STENL Mux --> NULL --> DACL max98090 i2c-193C9890:00: ASoC: Failed to add route STENL Mux -> NULL -> DACL max98090 i2c-193C9890:00: Control not supported for path STENL Mux -> [NULL] -> DACR max98090 i2c-193C9890:00: ASoC: no dapm match for STENL Mux --> NULL --> DACR max98090 i2c-193C9890:00: ASoC: Failed to add route STENL Mux -> NULL -> DACR Since there is no control between "STENL Mux" and DACs the control name must be NULL not "NULL". Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-15 13:12:53 +0000