summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2013-01-09Revert "ALSA: hda - Shut up pins at power-saving mode with Conexnat codecs"David Henningsson
This reverts commit 697c373e34613609cb5450f98b91fefb6e910588. The original patch was meant to remove clicking, but in fact caused even more clicking instead. Thanks to c4pp4 for doing most of the work with this bug. BugLink: https://bugs.launchpad.net/bugs/886975 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-09ALSA: hda - Disable runtime D3 for Intel CPT & coTakashi Iwai
We've got a few bug reports that the runtime D3 results in the dead HD-audio controller. It seems that the problem is in a deeper level than the sound driver itself, so as a temporal solution, disable the feature for these controllers again. Reported-and-tested-by: Vincent Blut <vincent.debian@free.fr> Reported-and-tested-by: Maurizio Avogadro <mavoga@gmail.com> Cc: <stable@vger.kernel.org> [v3.7] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-08ASoC: wm_adsp: Implement support for algorithm-specific coefficient blocksMark Brown
WMDR coefficient files can specify coefficients in terms of algorithm specific data regions. Record the start addresses of these regions while parsing the algorithms and then use them to handle coefficients with these formats. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08ASoC: wm_asdp: Validate sanity of algorithm countMark Brown
If we run into I/O problems the algorithm count may be crazy, validate it before we proceed and dump the read data for diagnostic purposes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08ASoC: wm_adsp: Factor out calculation of memory base addressesMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08ASoC: wm_adsp: Add support for parsing algorithmsMark Brown
ADSP devices report information on the algorithms loaded on them. Parse this data and use it to allow coefficients to be configured for specific algorithms. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08ASoC: arizona: Disable free-running mode on FLL1Charles Keepax
The free running mode can cause problems when attempting to bring up the FLL running from a defined clock source. This patch disables free-running mode. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08ASoC: mxs-saif: Use a signed integer for error valueFabio Estevam
saif->id and saif->master_id are unsigned, so they can not be negative. Fix the following warning when building with W=1 option: sound/soc/mxs/mxs-saif.c: In function 'mxs_saif_probe': sound/soc/mxs/mxs-saif.c:676:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] sound/soc/mxs/mxs-saif.c:688:3: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] sound/soc/mxs/mxs-saif.c:692:2: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Use a signed variable 'ret' to handle the error values. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08ALSA: hda - print power state for AFG node in proc fileDavid Henningsson
It seems useful, and power states are required for AFG nodes, so I see no reason not to print it. As a bonus, also print the AFG nid. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-08ALSA: pxa27x: rename pxa27x_assert_ac97reset()Mike Dunn
This patch does nothing functionally, it just gives the function a new name and modifies the prototype slightly in order to clarify what the function is doing (which is not necessarily asserting the reset). Some commentary also added. Tested on a palm treo 680 machine. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08Merge remote-tracking branch 'asoc/fix/pxa' into asoc-pxaMark Brown
2013-01-08ALSA: pxa27x: fix ac97 warm resetMike Dunn
This patch fixes some code that implements a work-around to a hardware bug in the ac97 controller on the pxa27x. A bug in the controller's warm reset functionality requires that the mfp used by the controller as the AC97_nRESET line be temporarily reconfigured as a generic output gpio (AF0) and manually held high for the duration of the warm reset cycle. This is what was done in the original code, but it was broken long ago by commit fb1bf8cd ([ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()) which changed the mfp to a GPIO input instead of a high output. The fix requires the ac97 controller to obtain the gpio via gpio_request_one(), with arguments that configure the gpio as an output initially driven high. Tested on a palm treo 680 machine. Reportedly, this broken code only prevents a warm reset on hardware that lacks a pull-up on the line, which appears to be the case for me. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2013-01-08ALSA: pxa27x: fix ac97 cold resetMike Dunn
Cold reset on the pxa27x currently fails and pxa2xx_ac97_try_cold_reset: cold reset timeout (GSR=0x44) appears in the kernel log. Through trial-and-error (the pxa270 developer's manual is mostly incoherent on the topic of ac97 reset), I got cold reset to complete by setting the WARM_RST bit in the GCR register (and later noticed that pxa3xx does this for cold reset as well). Also, a timeout loop is needed to wait for the reset to complete. Tested on a palm treo 680 machine. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2013-01-08ASoC: mxs-saif: Remove platform dataFabio Estevam
All MXS users have been converted to device tree and the board files have been removed. No need to keep platform data in the driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-07ASoC: wm_adsp: Ensure that block writes are from DMA aligned addressesMark Brown
Otherwise we won't run correctly on systems that require this for larger data transfers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-07ALSA: hda - add mute LED for HP Pavilion 17 (Realtek codec)David Henningsson
The mute LED is in this case connected to the Mic1 VREF. The machine also exposes the following string in BIOS: "HP_Mute_LED_0_A", so if more machines are coming, it probably makes sense to try to do something more generic, like for the IDT codec. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1096789 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-07ALSA: au88x0: fix incorrect left shiftNickolai Zeldovich
vortex_wt_setdsout performs bit-negation on the bit position (wt&0x1f) rather than on the resulting bitmask. This code is never actually invoked (vortex_wt_setdsout is always called with en=1), so this does not currently cause any problem, and this patch is simply cleanup. Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-04ASoC: arizona: Factor out rate selection codeMark Brown
In preparation for more advanced sample rate managment move the existing code out of the main hw_params() function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-04Merge branch 'fix/arizona' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-arizona
2013-01-04ASoC: arizona: Allow runtime reconfiguration of the output modeMark Brown
Some systems use external analogue switches to connect more analogue devices to the CODEC than are supported by the device. In some systems this requires changing the switched output from single ended to differential mode dynamically at runtime. Add a new function arizona_set_output_mode() to support this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-04ASoC: wm2000: Fix sense of speech clarity enableMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2013-01-04ASoC: wm5100: Remove DSP B and left justified formatsMark Brown
These are not supported Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2013-01-04ASoC: wm5102: Implement routing and power management for ISRCsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-04ASoC: arizona: Remove DSP B and left justified AIF modesMark Brown
These are not supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2013-01-04ASoC: wm2200: Remove DSP B and left justified AIF modesMark Brown
These are not supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2013-01-04sound: oss/pas2: Fix possible access out of arrayAsim Kadav
Added a fix for hardware dependence bug where a sound card failure should not result in reading beyond array memory index. Signed-off-by: Asim Kadav <kadav@cs.wisc.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-04ALSA: usb-audio: Fix kernel panic of Digidesign Mbox2 quirkDamien Zammit
This patch is based on 3.8-rc1. It fixes two things: 1) A kernel panic caused by incorrect allocation of a u8 variable "bootresponse". 2) A noisy dmesg (urb status -32) caused by broken pipe to an invalid midi endpoint. It is also a little cleaner because there is no need for a new QUIRK_MIDI type as suggested by kernel developers, since the device follows exactly the MIDIMAN protocol. Signed-off-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-03powerpc, dma: move bestcomm driver from arch/powerpc/sysdev to drivers/dmaPhilippe De Muyter
The bestcomm dma hardware, and some of its users like the FEC ethernet component, is used in different FreeScale parts, including non-powerpc parts like the ColdFire MCF547x & MCF548x families. Don't keep the driver hidden in arch/powerpc where it is inaccessible for other arches. .c files are moved to drivers/dma/bestcomm, while .h files are moved to include/linux/fsl/bestcomm. Makefiles, Kconfigs and #include directives are updated for the new file locations. Tested by recompiling for MPC5200 with all bestcomm users enabled. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2013-01-03ALSA: usb-audio: Add support for Creative BT-D1 via usb sound quirksAlexander Schremmer
Support the Creative BT-D1 Bluetooth USB audio device. Before this patch, Linux had trouble finding the correct USB descriptors and bailed out with these messages: no or invalid class specific endpoint descriptor Now it still prints these messages on hotplug: snd-usb-audio: probe of ...:1.0 failed with error -5 snd-usb-audio: probe of ...:1.2 failed with error -5 snd-usb-audio: probe of ...:1.3 failed with error -5 But the device works correctly, including the HID support. The patch is diff'ed against 3.8-rc1 but should apply to older kernels as well. Signed-off-by: Alexander Schremmer <alex@alexanderweb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-03ALSA: hda - Switch "On" and "Off" for "Mute-LED Mode" kcontrolDavid Henningsson
The vmaster hook sends 1 for enabled/unmuted and 0 for disabled/muted, but "Mute-LED Mode" being "On" refers to the LED being on, not the volume being on. Therefore "On" and "Off" should be switched. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-03ASoC: fsi: don't use platform info pointer on probe()Kuninori Morimoto
Current FSI driver is using platform info pointer, but it is not good design for DT support. This patch made it not to use platform info pointer. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: wm5102: Improve speaker enable performanceMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: palm27x: register card in platform_driver probeMike Dunn
Remove creation of an soc-audio device from the machine platform_driver probe function, and add a call to snd_soc_register_card() instead. The current code still works, but this mechanism has been deprecated, if I'm not mistaken. The ASoC core code produces the warning "ASoC: machine Palm/PXA27x should use snd_soc_register_card()" Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: palm27x: fix widgets and routes in dai_link initMike Dunn
ASoC core code now handles creation of controls and routing based on contents of struct snd_soc_card, so remove calls to snd_soc_dapm_new_controls() and snd_soc_dapm_add_routes() from the snd_soc_dai_link init function, and add widget and route definitions to struct snd_soc_card. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: OMAP: Remove obsolete machine drivers for Zoom2 and SDP3430Peter Ujfalusi
These boards are using the common omap-twl4030 machine driver, no need for separate machine drivers anymore. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: omap-twl4030: Add support for routing, voice port and jack detectPeter Ujfalusi
Update the common machine driver to support more boards including Zoom2 and SDP3430. - Support for voice port of twl4030 - HS jack plug detection support - The audio routing can be fine tuned via pdata or via provided routing table from DT. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: sdp3430: No need to configure pin mux for extmutePeter Ujfalusi
The codec driver takes care of this. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: twl4030: Configure extmute pinmux when the dedicated pin is in usePeter Ujfalusi
When HS extmute is enabled without custom GPIO we should configure the mux to allow the pin to be used as extmute signal. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: twl4030: Convert MICBIAS to SUPPLY widgetPeter Ujfalusi
In order to avoid breakage update the machine drivers at the same time using twl4030: omap3pandora, sdp3430 and zoom2 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: sdp3430: No need to configure the Voice port anymorePeter Ujfalusi
The codec driver takes care of these bits. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: zoom2: No need to configure the Voice port anymorePeter Ujfalusi
The codec driver takes care of these bits. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-02ASoC: twl4030: Correct the support for Voice portPeter Ujfalusi
In order to be able to use the Voice port of twl4030 three bits need to be handled in VOICE_IF register: VIF_EN: to enable the voice port (needed for both playback and capture) VIF_DIN_EN: Need to be enabled for playback only (input to the codec) VIF_DOUT_EN: Need to be enabled for capture only (output from codec) Use DAPM_SUPPLY for the VIF_EN bit and add DAPM_AIF_IO/OUT widget to handle the playback/capture bit. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-27ASoC: simple-card: use struct device pointer for dev_xxx()Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-27ASoC: wm8985: Refactor set_pll code to avoid gcc warningsFabio Estevam
Refactor set_pll code to avoid the following warnings: sound/soc/codecs/wm8985.c:852:50: warning: 'pll_div.k' may be used uninitialized in this function sound/soc/codecs/wm8985.c:849:9: warning: 'pll_div.n' may be used uninitialized in this function sound/soc/codecs/wm8985.c:848:23: warning: 'pll_div.div2' may be used uninitialized in this function Do the same as in commit 86ce6c9a (ASoC: WM8804: Refactor set_pll code to avoid GCC warnings). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-27ASoC: cs42l52: Convert to devm_input_allocate_device()Axel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-27ASoC: core: fix the memory leak in case of remove_aux_dev()Chuansheng Liu
When probing aux_dev, initializing is as below: device_initialize() device_add() So when remove aux_dev, we need do as below: device_del() device_put() Otherwise, the rtd_release() will not be called. So here using device_unregister() to replace device_del(), like the action in soc_remove_link_dais(). Signed-off-by: liu chuansheng <chuansheng.liu@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-27ASoC: core: fix the memory leak in case of device_add() failureChuansheng Liu
After called device_initialize(), even device_add() returns error, we still need use the put_device() to release the reference to call rtd_release(), which will do the free() action. Signed-off-by: liu chuansheng <chuansheng.liu@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24ASoC: wm8350: don't use [delayed_]work_pending()Tejun Heo
There's no need to test whether a (delayed) work item in pending before queueing, flushing or cancelling it. Most uses are unnecessary and quite a few of them are buggy. Remove unnecessary pending tests from wm8350. Only compile tested. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24ASoC: cs42l52: Catch no-match case in cs42l52_get_clkAxel Lin
In the case of no-match, return -EINVAL instead of 0. Since we assign i to ret in the for loop, ret always less than ARRAY_SIZE(clk_map_table). Thus remove the boundary checking for ret. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24ASoC: tegra: setup DAP3<->DAC3 connection by defaultLucas Stach
This connection is used by the AC97 controller. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-17 17:23:26 +0000