summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2015-01-28ALSA: line6: Use incremental loopTakashi Iwai
Using a decremental loop without particular reasons worsens the readability a lot. Use incremental loops instead. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Drop superfluous spinlock for triggerTakashi Iwai
The trigger callback is already spinlocked, so we need no more lock here (even for the linked substreams). Let's drop it. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Fix the error recovery in line6_pcm_acquire()Takashi Iwai
line6_pcm_acquire() tries to restore the newly obtained resources at the error path. But some flags aren't recorded and released properly when the corresponding buffer is already present. These bits have to be cleared in the error recovery, too. Also, "flags_final" can be initialized to zero since we pass only the subset of "channels" bits. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Use logical ORTakashi Iwai
Fixed a few places using bits OR wrongly for condition checks. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Fix missing error handling in line6_pcm_acquire()Takashi Iwai
Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Reduce superfluous spinlock in midi.cTakashi Iwai
The midi_transmit_lock is used always inside the send_urb_lock, thus it doesn't play any role. Let's kill it. Also, rename "send_urb_lock" as a more simple name "lock" since this is the only lock for midi. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Remove unused line6_nop_read()Takashi Iwai
The function isn't used any longer after rewriting from sysfs to leds class in toneport.c. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Fix memory leak at probe error pathTakashi Iwai
Fix memory leak at probe error path by rearranging the call order in line6_destruct() so that the common destructor is always called. Also this simplifies the error path to a single goto label. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Minor refactoringTakashi Iwai
Split some codes in the lengthy line6_probe(). Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6/toneport: Implement LED controls via LED classTakashi Iwai
Instead of non-standard sysfs, reimplement the LED controls on TonePort as LED class devices. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6/toneport: Fix wrong argument for toneport_has_led()Takashi Iwai
Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Don't forget to call driver's destructor at error pathTakashi Iwai
Currently disconnect callback is used as a driver's destructor, and this has to be called not only at the disconnection time but also at the error paths during probe. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6/toneport: Move setup_timer() at the beginningTakashi Iwai
... so that timer_del_sync() in the destructor can be called safely at any time. Also move the mod_timer() call in toneport_setup(), which is a bit clearer place. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Remove superfluous NULL checks in each driverTakashi Iwai
The interface and driver objects are always set when callbacks are called. Drop such superfluous NULL checks in init and disconnect calls of each driver. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Abort if inconsistent usbdev is found at disconnectTakashi Iwai
It's utterly unsafe to proceed further the disconnect procedure if the assigned usbdev is inconsistent with the expected object. Better to put a WARN_ON() for more cautions and abort immediately. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28ALSA: line6: Yet more cleanup of superfluous NULL checksTakashi Iwai
... in line6_disconnect() as well. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27Merge branch 'topic/arizona' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-w-codec
2015-01-27ASoC: rt5645: Add rt5650 codec supportBard Liao
This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: Intel: Used lock version to update shim registersJie Yang
We need hold lock each time updating shirm registers, otherwise, we may set unexpected values to them when they are set in different thread at different time sequence. The notification work will be scheduled in global work queue, which won't hold this sst->spinlock itself, so here we need change to use the lock version to update shim registers. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: ts3a227e: Add dts property that allows to specify micbias voltageAnatol Pomozov
The voltage controls key press threshold. Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: ts3a227e: Remap keys to match Android headset specificationAnatol Pomozov
ts3a227e datasheet says typical key resistance is key1 50 Ohm key2 135 Ohm key3 240 Ohm key4 470 Ohm The android headset specification expect buttons impedance: A (MEDIA) 0-70 Ohm D (VOICECOMMAND) 110-180 Ohm B (VOLUMEUP) 210-290 Ohm C (VOLUMEDOWN) 360-680 Ohm Thus key mapping should be key1 - MEDIA key2 - VOICECOMMAND key3 - VOLUMEUP key3 - VOLUMEDOWN Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Acked-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: wm8731: init mutex in i2c init pathManuel Lauss
The I2C init path forgot to init the mutex, leading to an oops when controls are accessed. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-01-27Merge branch 'fix/rt5677' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-w-codec
2015-01-27Merge branch 'topic/rt286' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-w-codec Conflicts: sound/soc/codecs/rt286.c
2015-01-27ASoC: atmel_ssc_dai: remove clock pin commentsBo Shen
As the clock can be get from TK/RK pin, so remove the comments. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27Merge branch 'fix/atmel' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-atmel
2015-01-27ASoC: atmel_ssc_dai: fix start event for I2S modeBo Shen
According to the I2S specification information as following: - WS = 0, channel 1 (left) - WS = 1, channel 2 (right) So, the start event should be TF/RF falling edge. Reported-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-01-27ASoC: arizona: Coalesce output power up delaysCharles Keepax
Save a bit of scheduling by coalescing all the output power up delays into a single delay. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: arizona: Add delay for output disableCharles Keepax
Give the output disable sequence a chance to fully complete, otherwise there is a danger we may remove the clock before it is finished resulting in a pop noise. The delay for each output must be cumulative and these are coalesced into a single delay. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: sta32x: change dai name to be in line with the sta350 driver.Thomas Niederprüm
Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: sta32x: minor Kconfig update.Thomas Niederprüm
- Add description for the driver - Add dependency on the I2C module Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: sta32x: use dev_dbg() for debug output.Thomas Niederprüm
Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: sta32x: add device tree binding.Thomas Niederprüm
make the sta32x driver usable with device tree configs. Code is heavily based on the sta350 driver. Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: sta32x: move code to calculate mclk divider and extrapolation ratio to ↵Thomas Niederprüm
sta32x_hw_params() Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: sta32x: use DECLARE_TLV_DB_RANGE macro.Thomas Niederprüm
Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: sta32x: make sta32x a gpio consumer for the reset GPIOThomas Niederprüm
The reset GPIO on the STA32X Codecs is used to reset the Codec and clear all registers. Also taking it down puts the IC in power save mode, so we put the device in reset mode when we go to sleep. Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: sta32x: Convert to direct regmap API usage.Thomas Niederprüm
use the regmap API directly rather than relying on the snd_soc_read/write functions as this seems to be in accordance with common practice. Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27ASoC: sta32x: correct bit shift value for IDE registerThomas Niederprüm
The IDE bit in the CONFF register is the third bit not the fourth. Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-26ASoC: rt5640: Add RT5642 ACPI ID for Intel BaytrailJarkko Nikula
Asus T100TAF uses ACPI ID "10EC5642" for its audio codec. I suppose it is updated ACPI ID for the RT5642 codec since some earlier platforms are using "10EC5640" with the RT5642 too. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-26ASoC: rt286: Fix capture volume setting issueBard Liao
The purpose of rt286_adc_event is to mute/numnte the ADC mixer. However, it will also set the capture volume to default value. As a result, "ADC0 Capture Volume" is not working if it is set before capture start. This patch remove rt286_adc_event and add "ADC0 Capture Switch" to mute/unmute ADC mixer. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-26ASoC: wm97xx: Reset AC'97 device before registering itLars-Peter Clausen
The wm97xx touchscreen driver binds itself to the snd_ac97 device that gets registered by the CODEC driver and expects that the device has already been reset. Before commit 6794f709b712 ("ASoC: ac97: Drop delayed device registration") the device was only registered after the probe function of the CODEC driver had finished running, but starting with the mentioned commit the device is registered as soon as snd_soc_new_ac97_codec() is called. This causes the touchscreen driver to no longer work. Modify the CODEC drivers to use snd_soc_alloc_ac97_codec() instead of snd_soc_new_ac97_codec() and make sure that the AC'97 device is reset before the snd_ac97 device gets registered. Fixes: 6794f709b712 ("ASoC: ac97: Drop delayed device registration") Reported-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Manuel Lauss <manuel.lauss@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-01-26ASoC: Add support for allocating AC'97 device before registering itLars-Peter Clausen
In some cases it is necessary to before additional operations after the device has been initialized and before the device is registered. This can for example be resetting the device. This patch introduces a new function snd_soc_alloc_ac97_codec() which is similar to snd_soc_new_ac97_codec() except that it does not register the device. Any users of snd_soc_alloc_ac97_codec() are responsible for calling device_add() manually. Fixes: 6794f709b712 ("ASoC: ac97: Drop delayed device registration") Reported-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-01-26ALSA: seq: remove unused callback_all fieldClemens Ladisch
Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-26ALSA: seq: fix off-by-one error in port limit checkClemens Ladisch
Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-26ALSA: seq: correctly report maximum number of portsClemens Ladisch
Due to SNDRV_SEQ_ADDRESS_BROADCAST, not all 256 port number values can be used. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-26Merge branch 'for-linus' into for-nextTakashi Iwai
Sync with the latest 3.19-rc state for applying other ALSA sequencer core fixes.
2015-01-26ALSA: seq-dummy: remove deadlock-causing events on closeClemens Ladisch
When the last subscriber to a "Through" port has been removed, the subscribed destination ports might still be active, so it would be wrong to send "all sounds off" and "reset controller" events to them. The proper place for such a shutdown would be the closing of the actual MIDI port (and close_substream() in rawmidi.c already can do this). This also fixes a deadlock when dummy_unuse() tries to send events to its own port that is already locked because it is being freed. Reported-by: Peter Billam <peter@www.pjb.com.au> Cc: <stable@vger.kernel.org> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-26Merge remote-tracking branches 'asoc/fix/rt5677', 'asoc/fix/simple', ↵Mark Brown
'asoc/fix/ts3a227e', 'asoc/fix/wm8904' and 'asoc/fix/wm8960' into asoc-linus
2015-01-26Merge remote-tracking branches 'asoc/fix/adi', 'asoc/fix/compress', ↵Mark Brown
'asoc/fix/fsl-ssi', 'asoc/fix/imx', 'asoc/fix/intel', 'asoc/fix/omap', 'asoc/fix/rockchip' and 'asoc/fix/rt286' into asoc-linus
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-17 05:50:15 +0000