| Age | Commit message (Collapse) | Author |
|---|
|
Add a predicate for testing if the device supports source selection to
make the conditional logic around this a bit cleaner.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Current snd_soc_unregister_card() indicates unregistered debug
message when it was called. But, it should be called only when
it was really unregistered.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Removes some functions that are not used anywhere:
sst_hsw_stream_unmute() sst_hsw_stream_mute() msg_set_stage_type()
sst_hsw_dx_get_state() sst_hsw_stream_set_write_position()
sst_hsw_stream_get_vol_reg() sst_hsw_stream_get_peak_reg()
sst_hsw_stream_get_pointer_reg() sst_hsw_stream_get_read_reg()
sst_hsw_stream_get_mixer_id() sst_hsw_stream_get_hw_id()
sst_hsw_mixer_set_volume_curve() sst_hsw_mixer_unmute()
sst_hsw_mixer_mute() sst_hsw_stream_set_volume_curve()
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Function sst_acpi_probe() uses plain strcpy for setting member firmware_name
of a struct intel_sst_drv from member firmware of a struct sst_machines.
Thereby the destination array has got a length of 20 byte while the source may
hold 32 byte. Since eg. commit 64b9c90b8600 ("ASoC: Intel: Fix BYTCR firmware
name") increased strings from "fw_sst_0f28.bin" to "intel/fw_sst_0f28.bin"
there is an actual possibility that the 20 byte array at the end of struct
intel_sst_drv is overrun.
Thus increase the size of the destination and use the same define for both
structs. Detected by Coverity CID 1260087.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
Commit 28c8331d386a ("ARM: S5PV210: Remove support for board files")
removed the Kconfig symbols MACH_GONI and MACH_AQUILA. As a result the
dependencies of SND_SOC_GONI_AQUILA_WM8994 can never be met. So remove
the unbuildable "SoC I2S Audio support for AQUILA/GONI - WM8994".
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add codec driver for the Maxim MAX98357A DAC.
Signed-off-by: Kenneth Westfield <kwestfie@codeaurora.org>
Acked-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use the new helper function to create sysfs entries in the card more
gracefully without races.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For assigning sysfs entries for a card device from the driver,
introduce a new helper function, snd_card_add_dev_attr(). In this
way, we can avoid the possible race between the device registration
and the sysfs addition / removal.
The driver can pass a new attribute group to add freely. This has to
be called before snd_card_register().
Currently, up to two extra groups can be added. More than that, it'll
return an error.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Conflicts:
drivers/net/vxlan.c
drivers/vhost/net.c
include/linux/if_vlan.h
net/core/dev.c
The net/core/dev.c conflict was the overlap of one commit marking an
existing function static whilst another was adding a new function.
In the include/linux/if_vlan.h case, the type used for a local
variable was changed in 'net', whereas the function got rewritten
to fix a stacked vlan bug in 'net-next'.
In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next'
overlapped with an endainness fix for VHOST 1.0 in 'net'.
In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter
in 'net-next' whereas in 'net' there was a bug fix to pass in the
correct network namespace pointer in calls to this function.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Toshiba Satellite S50D laptop with an IDT codec uses the GPIO4 (0x10)
as the master EAPD.
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=915858
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: AC'97 fixes
These are rather too large for this late in the release cycle but
they're clear, well understood and have been tested to fix a regression
which was introduced for v3.19. The details are all in Lars' changelog
and they've been cooking in -next for a while, to a large extent out
of conservatism about the size.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fix for Intel firmware name
Another one liner that arrived after the earlier pull request. There's
a trivial conflict with my -next branch, I'll send a pull request with
that resolution and some other new stuff before Monday.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v3.19
A few last minute fixes for v3.19, all driver specific. None of them
stand out particularly - it's all the standard people who are affected
will care stuff.
The Samsung fix is a DT only fix for the audio controller, it's being
merged via the ASoC tree due to process messups (the submitter sent it
at the end of a tangentally related series rather than separately to the
ARM folks) in order to make sure that it gets to people sooner.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
Conflicts:
sound/soc/intel/sst/sst_acpi.c
|
|
All sst firmware is provided under the intel directory of the linux-firmware
tree. By default this directory structure is kept when installing on a target
system. Change the path to expect a default linux-firmware installation.
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The patch add the customize setting for Dell Dino project.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We assign rt286->codec in rt286_probe. If rt286_jack_detect is
invoked before rt286_probe, rt286->codec will be NULL and cause
a kernel panic.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All sst firmware is provided under the intel directory of the linux-firmware
tree. By default this directory structure is kept when installing on a target
system. Change the path to expect a default linux-firmware installation.
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add machine driver for two Intel Cherryview-based platforms, Cherrytrail
and Braswell, with RT5645 codec
Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
|
|
This patch defines an API to select the clock source for specified filters.
Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Acked-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For runtime suspend/resume, it is some different with suspend/resume,
e.g. codec power supply won't be switch off, codec jack detection
still working(to wake up system from Jack event), won't call call
snd_soc_suspend/resume, etc.
So here, we add a platform PM status, HSW_PM_STATE_RTD3, to make
the status more clear, when in idle, it will enter this status, to
transfer from HSW_PM_STATE_RTD3 to HSW_PM_STATE_D3, we will do those
extra jobs, and vice versa for resuming.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v3.20
More updates for v3.20:
- Lots of refactoring from Lars-Peter Clausen, moving drivers to more
data driven initialization and rationalizing a lot of DAPM usage.
- Much improved handling of CDCLK clocks on Samsung I2S controllers.
- Lots of driver specific cleanups and feature improvements.
- CODEC support for TI PCM514x and TLV320AIC3104 devices.
- Board support for Tegra systems with Realtek RT5677.
Conflicts:
sound/soc/intel/sst-mfld-platform-pcm.c
|
|
This patch adds device tree support for the jz4740 driver.
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The div clock register is not modified during jz4740_i2s_hw_params.
Hence, default sampling rates are actually used regardless of
sampling rates input from userspace.
This patch adds support to calculate the value of the divider from
the parameters passed from userspace and update the relevant div
registers
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'asoc/topic/xtfpga' into asoc-next
|
|
'asoc/topic/wm8804' and 'asoc/topic/wm8904' into asoc-next
|
|
'asoc/topic/tlv320aic3x', 'asoc/topic/ts3a227e' and 'asoc/topic/ts3a277e' into asoc-next
|
|
'asoc/topic/sh', 'asoc/topic/simple' and 'asoc/topic/sta32x' into asoc-next
|
|
and 'asoc/topic/rt5677' into asoc-next
|
|
'asoc/topic/rcar' into asoc-next
|
|
'asoc/topic/intel', 'asoc/topic/mxs-saif' and 'asoc/topic/nuc900' into asoc-next
|
|
'asoc/topic/fsi', 'asoc/topic/fsl' and 'asoc/topic/fsl-asrc' into asoc-next
|
|
'asoc/topic/davinci' into asoc-next
|
|
'asoc/topic/cs42l52' and 'asoc/topic/cs42l56' into asoc-next
|
|
'asoc/topic/atmel' and 'asoc/topic/au1x' into asoc-next
|
|
|
|
|
|
|
|
|
|
|
|
|
|
'asoc/fix/intel', 'asoc/fix/rt286', 'asoc/fix/rt5640', 'asoc/fix/sgtl5000', 'asoc/fix/sta32x', 'asoc/fix/tlv320aic3x' and 'asoc/fix/wm8731' into asoc-linus
|
