Age | Commit message (Collapse) | Author |
|
Prefer the name of audio codecs as the mixer name even if
modem codecs are probed before the audio codecs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Don't use request_firmware() if the internal firmwares are defined
via Kconfig. Otherwise it results in a significant delay at loading
time (minutes).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Fixed the model (asus-laptop) for ASUS A9rp with ALC660 codec.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch fixes the headphone squeal and noise on Conexant CX20551
(Waikiki) audio.
Signed-off-by: Tobin Davis <gruemaster@email.uophx.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
- always set 256fs in SPDIF master clock mode
- disable deemphasis filter in AK4114 for Prodigy192
Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Some boards have the audio codec on slot #3 while the modem codec
on slot #0. The driver should continue to probe the slots when
no audio codec is found.
This fixes the problem of no device on Toshiba A100 (and some other
ATI SB450 devices).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Use PIN_HP output type for HP pin widgets accordingly, instead of
always applying PIN_OUT.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added line_out_type field to auto_pin_cfg struct to provide the
pin type of default line_outs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch adds support for the Asus A8JN Laptop.
Other modes were tested, this one worked best.
Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
The platform_device allocated by platform_device_alloc()
should be added to the device hierarchy by platform_device_add()
instead of platform_device_register().
Otherwise it will hit WARN_ON() in platform_device_register().
by illegal refcount.
This patch fixes such incorrect usages in portman2x4 and mts64 drivers.
Also it removes unnecessary trailing whitespaces.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Fix the auto-configuration of 8-channel devices. The sequence numbers
of usual 7.1 outputs are: 0/1/2/4 = Front/CLFE/Rear/Side
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
When intel8x0 driver is loaded in the crash kernel, it gets Oops
occasionally. This is because the irq handler gets called before
the proper hardware initialization. Now defer it after
snd_intel8x0_chip_init().
(reference: http://lkml.org/lkml/2007/3/5/252)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead
Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the support for Gigabyte S-Series GA-M57SLI-S4 motherboard
(model=6stack-dig).
Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Fix surround output on AD1986A codec 3stack model.
The following bugs are fixed:
- init verbs for 3stack disabled the shared surround outputs
- a channel mode change resulted in the mute of surrounds
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch makes the ASoC Kconfig descriptions a little more meaningful.
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch adds DMA size fields to the S3C24xx audio DMA params and
exports the S3C24xx I2S digital audio interface.
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch cleans up the audio DMA for the Samsung S3C24xx platform.
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
First generation MacBooks were getting ignored by sigmatel drivers
and wrongly being identified as MACMINI. This patch makes them
identify as MACBOOK.
Signed-off-by: Abhijit Bhopatkar <bainonline@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch exports the ASoC AC97 Digital Audio Interface as a GPL'ed
symbol.
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch adds the WM8753 codec driver to the kernel build system.
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch series adds support for the WM8753 codec as found on the
OpenMoko Neo 1973 (other Neo 1973 and Samsung S3C24xx patches to follow
today) as well other new devices.
Features:-
o HiFi and Voice DAI supported (inc runtime switching of DAI mode)
o DAPM
o All mixers
o PLL calculator
o 16,20 and 24bit samples.
o WM8753 I2C ID added to include/linux/i2c-id.h
From: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Harald Welte <laforge@openmoko.org>
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Seth Forshee <seth.forshee@gmail.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch by Frank Madarino updates the AT91xxxx Makefile and Kconfig
to build the renamed SSC files.
Changes:-
o Rename various i2s labels to ssc
Signed-off-by: Frank Mandarino <fmandarino@endrelia.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch by Frank Madarino updates the eti B1 machine to use the newer
AT91xxxx SSC core with the DSP/PCM audio hardware changes.
Changes:-
o #include 'at91-ssc.h' instead of 'at91-i2s.h'
o Rename various I2S labels to SSC
Signed-off-by: Frank Mandarino <fmandarino@endrelia.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch series by Frank Madarino updates the AT91xxxx core to add
DSP/PCM audio hardware formats.
Changes:-
o Rename at19-i2s.c -> at91-ssc.c
o Rename at91-i2s.h -> at91-ssc.h
o Add DSP hardware formats.
o Rename various I2S labels to SSC
Signed-off-by: Frank Mandarino <fmandarino@endrelia.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch fixes an issue whereby power was applied to any inactive
analog path that would leave and reenter a codec (e.g. ACOP -> ACIN on
WM8753). This change now checks for such paths and DAPM will power them
down when not in use.
Signed-off-by: Seth Forshee <seth.forshee@gmail.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch creates the WM9712 codec register cache using kmemdup instead
of doing a kzalloc followed by a memcpy.
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Trivial code clean-ups to follow the standard coding styles.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Merge hda-codec module to a single hda-intel module since this is the
only user right now. Although hda-codec stuff is designed to be used
universally from different controller drivers, currently only one
controller interface (and compatibles) are used. So, let's merge them
to a single module to save memory.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Allow opening the dedicated SPDIF stream while running on analog dup
mode. Then the SPDIF stream is once reset and assigned for the new
stream. It's useful for exclusive SPDIF output like AC3/DTS.
(In the former version, you had to close once the analog stream to
play the exclusive digital stream.)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Trivial code clean-ups of patch_realtek.c: indent and whitespace fixes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added the support of 96kHz sample rate back. Although the rate isn't
listed in the ACC_PAR_PCM bits but si3054 codecs do support this rate
explicitly. Now fixed the deteciton code not to check this extra bit.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
- Add ALC662 support
- Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL]
- Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V]
- Add SKU ID for auto mode
Signed-off-by: Kailang Yang <kailang@realtek.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Fixes:
--------
* correct card specific ice1724 initialization
* working IEC958 output of the card
* renamed capture controls
New features:
------------------
* analog input switch (line-in/mic)
* optional ak4114 based MI/ODI/O card detection & support: IEC958 input,
digital input switch (toslink/coax)
Unresolved issues
-----------------------
* Analog and digital input enums are listed on playback panel of alsamixer,
I do not know how to push them onto the capture one.
Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added some comments regarding naming of PCM streams on vt172x chip.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Call snd_ak4114_build() in juli support code to build proper mixer
elements for SPDIF inputs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
* correct register for 'IEC958 Non-PCM Bitstream', 'IEC958 DTS Bitstream'
to use AK4114_REG_RCS0
* correct check for control name: if (strstr(kctl->id.name, 'Playback'))
* correct check: if (!chip->init) in snd_ak4114_external_rate
* added PCM control 'IEC958 PPL Lock Status'
Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
When launching 'jackd -d alsa', lockdep issues the following warning:
[39701.405086] =============================================
[39701.405093] [ INFO: possible recursive locking detected ]
[39701.405107] 2.6.21-rc5-mm4 #2
[39701.405109] ---------------------------------------------
[39701.405112] jackd/17366 is trying to acquire lock:
[39701.405114] (&substream->self_group.lock){....}, at: [<c034d3c0>] snd_pcm_action_group+0x90/0x240
[39701.405131]
[39701.405131] but task is already holding lock:
[39701.405134] (&substream->self_group.lock){....}, at: [<c034d63f>] snd_pcm_action_lock_irq+0x3f/0xb0
[39701.405141]
[39701.405142] other info that might help us debug this:
[39701.405145] 3 locks held by jackd/17366:
[39701.405147] #0: (snd_pcm_link_rwlock){....}, at: [<c034d627>] snd_pcm_action_lock_irq+0x27/0xb0
[39701.405155] #1: (&substream->group->lock){....}, at: [<c034d638>] snd_pcm_action_lock_irq+0x38/0xb0
[39701.405163] #2: (&substream->self_group.lock){....}, at: [<c034d63f>] snd_pcm_action_lock_irq+0x3f/0xb0
[39701.405171]
[39701.405171] stack backtrace:
[39701.405174] [<c0103b8a>] show_trace_log_lvl+0x1a/0x30
[39701.405179] [<c0104912>] show_trace+0x12/0x20
[39701.405183] [<c01049c6>] dump_stack+0x16/0x20
[39701.405187] [<c013b980>] __lock_acquire+0xbd0/0x1040
[39701.405193] [<c013be60>] lock_acquire+0x70/0x90
[39701.405197] [<c0407846>] _spin_lock+0x36/0x50
[39701.405203] [<c034d3c0>] snd_pcm_action_group+0x90/0x240
[39701.405207] [<c034d653>] snd_pcm_action_lock_irq+0x53/0xb0
[39701.405211] [<c035046f>] snd_pcm_common_ioctl1+0x35f/0xfb0
[39701.405215] [<c0351544>] snd_pcm_playback_ioctl1+0x34/0x420
[39701.405219] [<c03519f3>] snd_pcm_playback_ioctl+0x43/0x50
[39701.405223] [<c017ecc8>] do_ioctl+0x28/0x80
[39701.405229] [<c017ed77>] vfs_ioctl+0x57/0x290
[39701.405233] [<c017efe9>] sys_ioctl+0x39/0x60
[39701.405237] [<c0102bf4>] sysenter_past_esp+0x5d/0x99
[39701.405240] =======================
The attached lockdep annotation silences the warning.
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Fix SPDIF output (at least on Realtek codecs). The DIGI_CONVERT verbs
have to be reset before the PCM stream is set up. Otherwise the digital
setup is screwed up.
Also, check the AMP capability before setting AMP of the digital out
widget.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
- Clean up ali5451.c, following the standard coding style, unneeded codes
reduced, and removal of redundant variable initializations.
Hungarian notation isn't fixed yet ;)
- Fix irq handler to return IRQ_NONE properly for shared irqs.
Also check the hardware availability in irq handler to avoid possible
initialization races at loading the driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
ak4114 code may trigger Oops when the parameters are changed without
call of snd_ak4114_build(). Now it checks the existence of kctl
element, and the workq is triggered after building the necessary
kcontrols.
Also, did some code clean up.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
some typo fixes.
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
ap192_4wire_start() in ice1712/revo.c returns unsigned char
whereas it should return unsigned int.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Minor optimization in trigger start callback. This fixes a nasty
compile warning, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Looks like the buffer size for the stereo capture has to be a
power of two. Now added a constraint to buffer bytes.
Also removed unnecessary #if 0 lines.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Added missing array terminators in patch_conexant.c.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
This patch changes snd-aoa-i2sbus to use MODULE_DEVICE_TABLE instead of
a hardcoded MODULE_ALIAS. Thanks to Sylvain Munaut for pointing this
out.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
strlcpy already accounts for the trailing zero in its length
computation, so there is no need to substract one to the buffer size.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Add snd-usb-caiaq driver to support caiaq usb-audio devices from
Native Instrument:
* Native Instruments RigKontrol2
* Native Instruments Kore Controller
* Native Instruments Audio Kontrol 1
* Native Instruments Audio 8 DJ
Signed-off-by: Daniel Mack <daniel@caiaq.org>
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
- change 'PCM' mixer control (pre/post 3D) to 'PCM Output Route'
- improve snd_azf3328_debug_show_ports
- less aggressive module init message
- document Bass/Treble non-bug (prompted by user report - Thank You!!)
- add some items to card description
- add some I/O register documentation
- enhance copyright
Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|