summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)Author
2009-10-20perf annotate: Remove requirement of passing a symbol nameArnaldo Carvalho de Melo
If the user doesn't pass a symbol name to annotate, it will annotate all the symbols that have hits, in order, just like 'perf report -s comm,dso,symbol'. This is a natural followup patch to the one that uses output_hists to find the symbols with hits. The common case is to annotate the first few entries at the top of a perf report, so lets type less characters. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256058509-19678-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-20perf annotate: Use the sym_priv_size area for the histogramArnaldo Carvalho de Melo
We have this sym_priv_size mechanism for attaching private areas to struct symbol entries but annotate wasn't using it, adding private areas to struct symbol in addition to a ->priv pointer. Scrap all that and use the sym_priv_size mechanism. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256055940-19511-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-20perf tools: Add ->unmap_ip operation to struct mapArnaldo Carvalho de Melo
We need this because we get section relative addresses when reading the symtabs, but when a tool like 'perf annotate' needs to match these address to what 'objdump -dS' produces we need the address + section back again. So in annotate now we look at the 'struct hist_entry' instances (that weren't really being used) so that we iterate only over the symbols that had some hit and get the map where that particular hit happened so that we can get the right address to match with annotate. Verified that at least: perf annotate mmap_read_counter # Uses the ~/bin/perf binary perf annotate --vmlinux /home/acme/git/build/perf/vmlinux intel_pmu_enable_all on a 'perf record perf top' session seems to work. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1255979877-12533-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-20perf timechart: Add a process filterArjan van de Ven
During the Kernel Summit demo of perf/ftrace/timechart, there was a feature request to have a process filter for timechart so that you can zoom into one or a few processes that you are really interested in. This patch adds basic support for this feature, the -p (--process) option now can select a PID or a process name to be shown. Multiple -p options are allowed, and the combined set will be included in the output. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091020070939.7d0fb8a7@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-20Merge branch 'perf/urgent' into perf/coreIngo Molnar
Merge reason: Queue up dependent patch. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-20perf timechart: Improve the visual appearance of scheduler delaysArjan van de Ven
[from KS feedback] Currently, scheduler delays are shown in a mostly transparent, light yellow color. This color is rather hard to see on several screens, especially projectors. This patch changes the color of the scheduler delays to be a much more "hard" yellow that survived the kernel summit projector. Reported-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091020064731.20ae126a@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-20perf timechart: Fix the wakeup-arrows that point to non-visible processesArjan van de Ven
The timechart wakeup arrows currently show no process information when the waker/wakee are processes that are not actually chosen to be shown on the timechart. This patch fixes this oversight, by looking through all processes (after giving preference to visible processes) as well as falling back to just showing the PID if no name for the process can be resolved. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091020064649.0e4959b2@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-20perf tools: Add bunch of missing headers to LIB_HArnaldo Carvalho de Melo
Build dependencies were not properly mapped out. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1255973491-11626-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-20perf tools: Add missing tools/perf/util/include/string.hArnaldo Carvalho de Melo
To cure a bunch of: In file included from util/include/linux/bitmap.h:1, from util/header.h:8, from builtin-trace.c:7: util/include/../../../../include/linux/bitmap.h:8:26: error: linux/string.h: No such file or directory make: *** [builtin-trace.o] Error 1 make: *** Waiting for unfinished jobs.... Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1255972296-11500-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-19perf stat: Count branches firstIngo Molnar
Count branches first, cache-misses second. The reason is that on x86 branches are not counted by all counters on all CPUs. Before: Performance counter stats for 'ls': 0.756653 task-clock-msecs # 0.802 CPUs 0 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 250 page-faults # 0.330 M/sec 2375725 cycles # 3139.781 M/sec 1628129 instructions # 0.685 IPC 19643 cache-references # 25.960 M/sec 4608 cache-misses # 6.090 M/sec 342532 branches # 452.694 M/sec <not counted> branch-misses 0.000943356 seconds time elapsed After: Performance counter stats for 'ls': 1.056734 task-clock-msecs # 0.859 CPUs 0 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 259 page-faults # 0.245 M/sec 3345932 cycles # 3166.295 M/sec 3074090 instructions # 0.919 IPC 616928 branches # 583.806 M/sec 39279 branch-misses # 6.367 % 21312 cache-references # 20.168 M/sec 3661 cache-misses # 3.464 M/sec 0.001230551 seconds time elapsed (also prettify the printout of branch misses, in case it's getting scaled.) Cc: Tim Blechmann <tim@klingt.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4ADC3975.8050109@klingt.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- tools/perf/builtin-stat.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index c373683..95a55ea 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -59,6 +59,8 @@ static struct perf_event_attr default_attrs[] = { { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES}, { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS}, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES }, }; --- tools/perf/builtin-stat.c | 20 ++++++++++---------- 1 files changed, 10 insertions(+), 10 deletions(-) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index 95a55ea..90e0a26 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -50,17 +50,17 @@ static struct perf_event_attr default_attrs[] = { - { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK }, - { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES}, - { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS }, - { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS }, - - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES }, - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES}, - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES }, - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS}, - { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS }, + { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS }, + + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES }, };
2009-10-19perf stat: Re-align the default_attrs[] arrayIngo Molnar
Clean up the array definition to be vertically aligned. No functional effects. Cc: Tim Blechmann <tim@klingt.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4ADC3975.8050109@klingt.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- tools/perf/builtin-stat.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index c373683..95a55ea 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -59,6 +59,8 @@ static struct perf_event_attr default_attrs[] = { { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS }, { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES}, { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES }, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS}, + { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES }, };
2009-10-19perf stat: Add branch performance events to default outputTim Blechmann
Adds performance event information about branches and branch misses to the default output of perf stat. Signed-off-by: Tim Blechmann <tim@klingt.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4ADC3975.8050109@klingt.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-19perf tools: Display better error messages on missing packagesRandy Dunlap
Check for libelf headers and glibc headers separately so that the error message correctly identifies which package installation is missing/needed. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: paulus@samba.org Cc: a.p.zijlstra@chello.nl Cc: efault@gmx.de Cc: fweisbec@gmail.com Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <4ADBCCE8.3060300@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-19perf top: Fix --delay_secs 0 division by zeroTim Blechmann
Add delay_secs sanity check to handle_keypress, this fixes a division by zero crash. Signed-off-by: Tim Blechmann <tim@klingt.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4AD9EBFD.106@klingt.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-19perf tools: Use DECLARE_BITMAP instead of an open-coded arrayFrederic Weisbecker
Use DECLARE_BITMAP instead of an open coded array for our bitmap of featured sections. This makes the array an unsigned long instead of a u64 but since we use a 256 bits bitmap, the array size shouldn't vary between different boxes. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1255795038-13751-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-19perf tools: Introduce bitmask'ed additional headersFrederic Weisbecker
This provides a new set of bitmasked headers. A new field is added in the perf headers that implements a bitmap storing optional features present in the perf.data file. The layout can be pictured like this: (Usual perf headers)(Features bitmap)[Feature 0][Feature n][Feature 255] If the bit n is set, then the feature n is used in this file. They are all set in order. This brings a backward and forward compatibility. The trace_info section has moved into such optional features, this is the first and only one for now. This is backward compatible with the .32 file version although it doesn't support the previous separate trace.info file. And finally it doesn't support the current interim development version. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1255792354-11304-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-19perf tools: Use kernel bitmap libraryFrederic Weisbecker
Use the kernel bitmap library for internal perf tools uses. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1255792354-11304-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-19perf stat: Add branch performance metricAnton Blanchard
When we count both branches and branch-misses it is useful to print out the percentage of branch-misses: # perf stat -e branches -e branch-misses /bin/true Performance counter stats for '/bin/true': 401684 branches # 0.000 M/sec 23301 branch-misses # 5.801 % Signed-off-by: Anton Blanchard <anton@samba.org> Cc: paulus@samba.org Cc: a.p.zijlstra@chello.nl LKML-Reference: <20091018112923.GQ4808@kryten> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-17Merge commit 'v2.6.32-rc5' into perf/probesIngo Molnar
Conflicts: kernel/trace/trace_event_profile.c Merge reason: update to -rc5 and resolve conflict. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-17perf: Add perf-probe documentMasami Hiramatsu
Add perf-probe subcommand document and add it to command-list. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20091017000827.16556.73539.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-17perf: Add DIE_IF() macro for error checkingMasami Hiramatsu
Add DIE_IF() macro and replace ERR_IF() with it, and use linux/stringify.h. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20091017000818.16556.82452.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-17perf: Use eprintf() for debug messages in perf-probeMasami Hiramatsu
Replace debug() macro with eprintf() and add -v option for showing those messages in perf-probe. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20091017000810.16556.38013.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-17perf: Use die() for error cases in perf-probeMasami Hiramatsu
Use die() for exiting perf-probe with errors. This replaces perror_exit(), msg_exit() and fprintf()+exit() with die(), and uses die() in semantic_error(). This also renames 'die' local variables to 'dw_die' for avoiding name confliction. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20091017000801.16556.46866.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-17perf: Check libdwarf APIs for perf probeMasami Hiramatsu
Check libdwarf APIs for perf probe in tools/perf/Makefile. Since dwarf_get_ranges() has been added from libdwarf 20081231 (and it's the newest function used in probe-finder.c), this just checks whether the function is defined. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20091017000752.16556.92051.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-17perf tools: Move dereference after NULL testJulia Lawall
In each case, if the NULL test on thread is needed, then the dereference should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> LKML-Reference: <Pine.LNX.4.64.0910170842500.9213@ask.diku.dk> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-16perf tools: Bump version to 0.0.2Ingo Molnar
We released the first version of perf with 0.0.1 in v2.6.31, time to double our version number to 0.0.2 ;-) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15perf trace: Add filter SuppportLi Zefan
Add a new option "--filter <filter_str>" to perf record, and it should be right after "-e trace_point": #./perf record -R -f -e irq:irq_handler_entry --filter irq==18 ^C # ./perf trace perf-4303 ... irq_handler_entry: irq=18 handler=eth0 init-0 ... irq_handler_entry: irq=18 handler=eth0 init-0 ... irq_handler_entry: irq=18 handler=eth0 init-0 ... irq_handler_entry: irq=18 handler=eth0 init-0 ... irq_handler_entry: irq=18 handler=eth0 See Documentation/trace/events.txt for the syntax of filter expressions. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4AD6955F.90602@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15perf tools: Remove all char * typecasts and use const in prototypeSteven Rostedt
The (char *) for all the static strings was a fix for the symptom and not the disease. The real issue was that the function prototypes needed to be declared "const char *". Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194400.635935008@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15perf tools: Handle - and + in parsing trace print formatSteven Rostedt
The opterators '-' and '+' are not handled in the trace print format. To do: '++' and '--'. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194400.330843045@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15perf tools: Add latency format to trace outputSteven Rostedt
Add the irqs disabled, preemption count, need resched, and other info that is shown in the latency format of ftrace. # perf trace -l perf-16457 2..s2. 53636.260344: kmem_cache_free: call_site=ffffffff811198f perf-16457 2..s2. 53636.264330: kmem_cache_free: call_site=ffffffff811198f perf-16457 2d.s4. 53636.300006: kmem_cache_free: call_site=ffffffff810d889 Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194400.076588953@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15perf tools: Handle both versions of ftrace outputSteven Rostedt
The ftrace output events can have either arguments or no arguments. The parser needs to be able to handle both. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194359.790221427@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15perf tools: Fix bprintk reading in trace outputSteven Rostedt
The bprintk parsing was broken in more ways than one. The file parsing was incorrect, and the words used by the arguments are always 4 bytes aligned, even on 64-bit machines. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194359.520931637@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15perf tools: Still continue on failed parsing of an eventSteven Rostedt
Even though an event may fail to parse, we should not kill the entire report. The trace should still be able to show what it can. If an event fails to parse, a warning is printed, and the output continues. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194359.190809589@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15perf tools: Handle the case with and without the "signed" trace fieldSteven Rostedt
The trace format files now have a "signed" field. But we should still be able to handle the kernels that do not have this field. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194358.888239553@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15perf tools: Handle newlines in trace parsing betterSteven Rostedt
New lines between args in the trace format can break the parsing. This should not be the case. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194358.637991808@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15perf tools: Handle * as typecast in trace parsingSteven Rostedt
The '*' is currently only treated as a multiplication, and it needs to be handled as a typecast pointer. This is the version used by trace-cmd. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194358.409327875@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15perf tools: Handle arrays in print fields for trace parsingSteven Rostedt
The array used by the ftrace stack events (caller[x]) causes issues with the parser. This adds code to handle the case, but it also assumes that the array is of type long. Note, this is a special case used (currently) only by the ftrace user and kernel stack records. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194358.124833639@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15perf tools: Handle trace parsing of < and >Steven Rostedt
The code to handle the '<' and '>' ops was all in place, but they were not in the switch statement to consider them as valid ops. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194357.807434040@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15perf tools: Fix backslash processing on trace print formatsSteven Rostedt
The handling of backslashes was broken. It would stop parsing when encountering one. Also, '\n', '\t', '\r' and '\\' were not converted. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194357.521974680@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15perf tools: Handle print concatenations in event format fileSteven Rostedt
kmem_alloc ftrace event format had a string that was broken up by two tokens. "string 1" "string 2". This patch lets the parser be able to handle the concatenation. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <20091014194357.253818714@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15Merge branch 'linus' into perf/coreIngo Molnar
Merge reason: pick up tools/perf/ changes from upstream. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-13perf tools: Move threads & last_match to threads.cArnaldo Carvalho de Melo
This was just being copy'n'pasted all over. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20091013141629.GD21809@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-13perf tools: Remove expensive old debug code from perf topMike Galbraith
Calling gettimeofday() at high frequency is painful for handicapped boxen. The spot calling gettimeofday() is old unneeded debug code, so remove it. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1255438640.7173.1.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-13perf tools: Do not manually count string lengthsVincent Legoll
Use strlen & macros instead of manually counting string lengths as this is error prone and may lend to bugs. Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com> Cc: Linus Torvalds <torvalds@osdl.org> LKML-Reference: <4727185d0910130118m5387058dndb02ac9b384af9f0@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12perf probe: Add perf probe command support without libdwarfMasami Hiramatsu
Enables 'perf probe' even if libdwarf is not installed. If libdwarf is not found, 'perf probe' just disables dwarf support. Users can use 'perf probe' to set up new events by using kprobe_events format. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091007222830.1684.25665.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-12perf: Add perf probe subcommand, a kprobe-event setup helperMasami Hiramatsu
Add perf probe subcommand that implements a kprobe-event setup helper to the perf command. This allows user to define kprobe events using C expressions (C line numbers, C function names, and C local variables). Usage ----- perf probe [<options>] -P 'PROBEDEF' [-P 'PROBEDEF' ...] -k, --vmlinux <file> vmlinux/module pathname -P, --probe <p|r:[GRP/]NAME FUNC[+OFFS][@SRC]|@SRC:LINE [ARG ...]> probe point definition, where p: kprobe probe r: kretprobe probe GRP: Group name (optional) NAME: Event name FUNC: Function name OFFS: Offset from function entry (in byte) SRC: Source code path LINE: Line number ARG: Probe argument (local variable name or kprobe-tracer argument format is supported.) Changes in v4: - Add _GNU_SOURCE macro for strndup(). Changes in v3: - Remove -r option because perf always be used for online kernel. - Check malloc/calloc results. Changes in v2: - Check synthesized string length. - Rename perf kprobe to perf probe. - Use spaces for separator and update usage comment. - Check error paths in parse_probepoint(). - Check optimized-out variables. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Frank Ch. Eigler <fche@redhat.com> LKML-Reference: <20091008211737.29299.14784.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2009-10-12perf tools: Remove static debugfs path from parse-eventsAshwin Chaugule
Timechart doesn't work if debugfs is not in /sys/kernel/debug/. Fixed by using global debugfs_path which is filled in by perf. Signed-off-by: Ashwin Chaugule <ashwinc@quicinc.com> Cc: "Arjan van de Ven" <arjan@linux.intel.com> LKML-Reference: <a751bdc6978478de6d10440e587a2cc7.squirrel@www.codeaurora.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12perf tools: Fix the NO_64BIT build on pure 64-bit systemsIngo Molnar
Randy Dunlap reported that 'make NO_64BIT=1' fails to build a pure 32-b it binary on 64-bit/64-bit x86 systems. The reason is that we dont pass in the -m32 and GCC defaults to -m64. So pass it in - and also extend the warning message about libelf dependencies - glibc-dev[el] is needed as well beyond the libelf library. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: Message-Id: <20091005131729.78444bfb.randy.dunlap@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12perf sched: Add -C option to measure on a specific CPUMike Galbraith
To refresh, trying to sched record only one CPU results in bogus latencies as below. I fixed^Wmade it stop doing the bad thing today, by following task migration events properly. Before: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- Xorg:4943 | 1.290 ms | 1 | avg: 1670.132 ms | max: 1670.132 ms | hald-addon-stor:3569 | 0.091 ms | 3 | avg: 658.609 ms | max: 1975.797 ms | hald-addon-stor:3573 | 0.209 ms | 4 | avg: 499.138 ms | max: 1990.565 ms | audispd:4270 | 0.012 ms | 1 | avg: 0.015 ms | max: 0.015 ms | .... marge:/root/tmp # perf sched trace|grep 'Xorg:4943' swapper-0 [000] 401.184013288: sched_stat_runtime: task: Xorg:4943 runtime: 1233188 [ns], vruntime: 19105169779 [ns] rt2870TimerQHan-4947 [000] 402.854140127: sched_stat_wait: task: Xorg:4943 wait: 580073 [ns] rt2870TimerQHan-4947 [000] 402.854141770: sched_migrate_task: task Xorg:4943 [140] from: 1 to: 0 rt2870TimerQHan-4947 [000] 402.854143854: sched_stat_wait: task: Xorg:4943 wait: 0 [ns] rt2870TimerQHan-4947 [000] 402.854145397: sched_switch: task rt2870TimerQHan:4947 [140] (D) ==> Xorg:4943 [140] Xorg-4943 [000] 402.854193133: sched_stat_runtime: task: Xorg:4943 runtime: 56546 [ns], vruntime: 11766332500 [ns] Xorg-4943 [000] 402.854196842: sched_switch: task Xorg:4943 [140] (S) ==> swapper:0 [140] After: marge:/root/tmp # taskset -c 1 perf sched record -C 0 -- sleep 10 marge:/root/tmp # perf sched lat ----------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------------- amarokapp:11150 | 271.297 ms | 878 | avg: 0.130 ms | max: 1.057 ms | konsole:5965 | 1.370 ms | 12 | avg: 0.092 ms | max: 0.855 ms | Xorg:4943 | 179.980 ms | 1109 | avg: 0.087 ms | max: 1.206 ms | hald-addon-stor:3574 | 0.212 ms | 9 | avg: 0.040 ms | max: 0.169 ms | hald-addon-stor:3570 | 0.223 ms | 9 | avg: 0.037 ms | max: 0.223 ms | klauncher:5864 | 0.550 ms | 8 | avg: 0.032 ms | max: 0.048 ms | The 'Maximum delay ms' results are now sane. Signed-off-by: Mike Galbraith <efault@gmx.de> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12perf tools: Fix counter sample frequency breakageMike Galbraith
Commit 42e59d7d19dc4b4 switched to a default sample frequency of 1KHz, which overrides any user supplied count, causing sched, top and timechart to miss events due to their discrete events being flagged PERF_SAMPLE_PERIOD. Override default sample frequency when the user profides a period count, and make both record and top honor that user supplied option. Signed-off-by: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <1255326963.15107.2.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-17 17:31:41 +0000