From 4bbd10fd312f50de74ba53f6cb968986da5dfe92 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 27 Aug 2007 17:29:10 +0800 Subject: Blackfin arch: Update/Fix PM support add new pm_ops valid Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/pm.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index 1772d8d2c1a..b1030272220 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -158,10 +158,16 @@ static int bfin_pm_finish(suspend_state_t state) return 0; } +static int bfin_pm_valid(suspend_state_t state) +{ + return (state == PM_SUSPEND_STANDBY); +} + struct pm_ops bfin_pm_ops = { .prepare = bfin_pm_prepare, .enter = bfin_pm_enter, .finish = bfin_pm_finish, + .valid = bfin_pm_valid, }; static int __init bfin_pm_init(void) -- cgit v1.2.3-70-g09d2 From e62687f995fd7ba0b68c3b0a4f4d9fd9d1c54ec2 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Sun, 5 Aug 2007 17:21:55 +0800 Subject: Blackfin arch: fix the aliased write macros Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- include/asm-blackfin/mach-bf561/cdefBF561.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/include/asm-blackfin/mach-bf561/cdefBF561.h index 6e87ab269ff..73d4d65249c 100644 --- a/include/asm-blackfin/mach-bf561/cdefBF561.h +++ b/include/asm-blackfin/mach-bf561/cdefBF561.h @@ -83,9 +83,9 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) /* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */ #define bfin_read_SWRST() bfin_read_SICA_SWRST() -#define bfin_write_SWRST() bfin_write_SICA_SWRST() +#define bfin_write_SWRST(val) bfin_write_SICA_SWRST(val) #define bfin_read_SYSCR() bfin_read_SICA_SYSCR() -#define bfin_write_SYSCR() bfin_write_SICA_SYSCR() +#define bfin_write_SYSCR(val) bfin_write_SICA_SYSCR(val) /* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */ #define bfin_read_SICA_SWRST() bfin_read16(SICA_SWRST) -- cgit v1.2.3-70-g09d2 From b91dc336cc7e0c9843f87ad0ba4cdbc821d69549 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Fri, 3 Aug 2007 15:54:36 -0700 Subject: [XTENSA] fix wrong usage of __init and __initdata in traps.c A variable was defined with __init instead of __initdata and the function accessing that variable wasn't initialized with __init. Signed-off-by: Chris Zankel --- arch/xtensa/kernel/traps.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index c5e62f9d9f5..8be99c777d9 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -83,7 +83,7 @@ typedef struct { void* handler; } dispatch_init_table_t; -dispatch_init_table_t __init dispatch_init_table[] = { +static dispatch_init_table_t __initdata dispatch_init_table[] = { { EXCCAUSE_ILLEGAL_INSTRUCTION, 0, do_illegal_instruction}, { EXCCAUSE_SYSTEM_CALL, KRNL, fast_syscall_kernel }, @@ -305,7 +305,7 @@ do_debug(struct pt_regs *regs) #define set_handler(idx,handler) (exc_table[idx] = (unsigned long) (handler)) -void trap_init(void) +void __init trap_init(void) { int i; -- cgit v1.2.3-70-g09d2 From 3547cdb1526aabd38b1e71dba93d545340fe41f8 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Fri, 3 Aug 2007 15:55:07 -0700 Subject: [XTENSA] add missing system calls Add missing system calls that have been recently added to the kernel for the Xtensa architecture and define __IGNORE macros for system calls that we don't need for Xtensa. Signed-off-by: Chris Zankel --- include/asm-xtensa/syscall.h | 22 +++++++- include/asm-xtensa/unistd.h | 122 +++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 140 insertions(+), 4 deletions(-) diff --git a/include/asm-xtensa/syscall.h b/include/asm-xtensa/syscall.h index 6cb0d42f11c..ea9b5132215 100644 --- a/include/asm-xtensa/syscall.h +++ b/include/asm-xtensa/syscall.h @@ -1,3 +1,13 @@ +/* + * include/asm-xtensa/syscall.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2007 Tensilica Inc. + */ + struct pt_regs; struct sigaction; asmlinkage long xtensa_execve(char*, char**, char**, struct pt_regs*); @@ -17,4 +27,14 @@ asmlinkage long sys_rt_sigaction(int, const struct sigaction __user *, struct sigaction __user *, size_t); -asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg); +asmlinkage long xtensa_shmat(int, char __user *, int); + +/* Should probably move to linux/syscalls.h */ +struct pollfd; +asmlinkage long sys_pselect6(int n, fd_set __user *inp, fd_set __user *outp, + fd_set __user *exp, struct timespec __user *tsp, void __user *sig); +asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds, + struct timespec __user *tsp, const sigset_t __user *sigmask, + size_t sigsetsize); + + diff --git a/include/asm-xtensa/unistd.h b/include/asm-xtensa/unistd.h index 9bd34024431..78ad761e6d5 100644 --- a/include/asm-xtensa/unistd.h +++ b/include/asm-xtensa/unistd.h @@ -577,7 +577,112 @@ __SYSCALL(258, sys_keyctl, 5) #define __NR_available259 259 __SYSCALL(259, sys_ni_syscall, 0) -#define __NR_syscall_count 261 + +#define __NR_readahead 260 +__SYSCALL(260, sys_readahead, 5) +#define __NR_remap_file_pages 261 +__SYSCALL(261, sys_remap_file_pages, 5) +#define __NR_migrate_pages 262 +__SYSCALL(262, sys_migrate_pages, 0) +#define __NR_mbind 263 +__SYSCALL(263, sys_mbind, 6) +#define __NR_get_mempolicy 264 +__SYSCALL(264, sys_get_mempolicy, 5) +#define __NR_set_mempolicy 265 +__SYSCALL(265, sys_set_mempolicy, 3) +#define __NR_unshare 266 +__SYSCALL(266, sys_unshare, 1) +#define __NR_move_pages 267 +__SYSCALL(267, sys_move_pages, 0) +#define __NR_splice 268 +__SYSCALL(268, sys_splice, 0) +#define __NR_tee 269 +__SYSCALL(269, sys_tee, 0) +#define __NR_vmsplice 270 +__SYSCALL(270, sys_vmsplice, 0) +#define __NR_available271 271 +__SYSCALL(271, sys_ni_syscall, 0) + +#define __NR_pselect6 272 +__SYSCALL(272, sys_pselect6, 0) +#define __NR_ppoll 273 +__SYSCALL(273, sys_ppoll, 0) +#define __NR_epoll_pwait 274 +__SYSCALL(274, sys_epoll_pwait, 0) +#define __NR_available275 275 +__SYSCALL(275, sys_ni_syscall, 0) + +#define __NR_inotify_init 276 +__SYSCALL(276, sys_inotify_init, 0) +#define __NR_inotify_add_watch 277 +__SYSCALL(277, sys_inotify_add_watch, 3) +#define __NR_inotify_rm_watch 278 +__SYSCALL(278, sys_inotify_rm_watch, 2) +#define __NR_available279 279 +__SYSCALL(279, sys_ni_syscall, 0) + +#define __NR_getcpu 280 +__SYSCALL(280, sys_getcpu, 0) +#define __NR_kexec_load 281 +__SYSCALL(281, sys_ni_syscall, 0) + +#define __NR_ioprio_set 282 +__SYSCALL(282, sys_ioprio_set, 2) +#define __NR_ioprio_get 283 +__SYSCALL(283, sys_ioprio_get, 3) + +#define __NR_set_robust_list 284 +__SYSCALL(284, sys_set_robust_list, 3) +#define __NR_get_robust_list 285 +__SYSCALL(285, sys_get_robust_list, 3) +#define __NR_reserved286 286 /* sync_file_rangeX */ +__SYSCALL(286, sys_ni_syscall, 3) +#define __NR_available287 287 +__SYSCALL(287, sys_faccessat, 0) + +/* Relative File Operations */ + +#define __NR_openat 288 +__SYSCALL(288, sys_openat, 4) +#define __NR_mkdirat 289 +__SYSCALL(289, sys_mkdirat, 3) +#define __NR_mknodat 290 +__SYSCALL(290, sys_mknodat, 4) +#define __NR_unlinkat 291 +__SYSCALL(291, sys_unlinkat, 3) +#define __NR_renameat 292 +__SYSCALL(292, sys_renameat, 4) +#define __NR_linkat 293 +__SYSCALL(293, sys_linkat, 5) +#define __NR_symlinkat 294 +__SYSCALL(294, sys_symlinkat, 3) +#define __NR_readlinkat 295 +__SYSCALL(295, sys_readlinkat, 4) +#define __NR_utimensat 296 +__SYSCALL(296, sys_utimensat, 0) +#define __NR_fchownat 297 +__SYSCALL(297, sys_fchownat, 5) +#define __NR_futimesat 298 +__SYSCALL(298, sys_futimesat, 4) +#define __NR_fstatat64 299 +__SYSCALL(299, sys_fstatat64, 0) +#define __NR_fchmodat 300 +__SYSCALL(300, sys_fchmodat, 4) +#define __NR_faccessat 301 +__SYSCALL(301, sys_faccessat, 4) +#define __NR_available302 302 +__SYSCALL(302, sys_ni_syscall, 0) +#define __NR_available303 303 +__SYSCALL(303, sys_ni_syscall, 0) + +#define __NR_signalfd 304 +__SYSCALL(304, sys_signalfd, 3) +#define __NR_timerfd 305 +__SYSCALL(305, sys_timerfd, 4) +#define __NR_eventfd 306 +__SYSCALL(306, sys_eventfd, 1) + +#define __NR_syscall_count 307 /* * sysxtensa syscall handler @@ -612,8 +717,19 @@ __SYSCALL(259, sys_ni_syscall, 0) #define __ARCH_WANT_SYS_LLSEEK #define __ARCH_WANT_SYS_RT_SIGACTION #define __ARCH_WANT_SYS_RT_SIGSUSPEND +#define __ARCH_WANT_SYS_GETPGRP -#endif /* __KERNEL__ */ +/* + * Ignore legacy system calls in the checksyscalls.sh script + */ -#endif /* _XTENSA_UNISTD_H */ +#define __IGNORE_fork /* use clone */ +#define __IGNORE_time +#define __IGNORE_alarm /* use setitimer */ +#define __IGNORE_pause +#define __IGNORE_mmap /* use mmap2 */ +#define __IGNORE_vfork /* use clone */ +#define __IGNORE_fadvise64 /* use fadvise64_64 */ +#endif /* __KERNEL__ */ +#endif /* _XTENSA_UNISTD_H */ -- cgit v1.2.3-70-g09d2 From cef9287ead2775e4d7eaa280a73ee99d7269c3e4 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Sat, 4 Aug 2007 09:20:43 -0700 Subject: [XTENSA] Add getpgrp system-call to unistd.h Although __ARCH_WANT_SYS_GETPGRP was defined, the actualy entry for the getpgrp system-call was missing. Signed-off-by: Chris Zankel --- include/asm-xtensa/unistd.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-xtensa/unistd.h b/include/asm-xtensa/unistd.h index 78ad761e6d5..bed04102407 100644 --- a/include/asm-xtensa/unistd.h +++ b/include/asm-xtensa/unistd.h @@ -339,8 +339,8 @@ __SYSCALL(148, sys_setpgid, 2) __SYSCALL(149, sys_getpgid, 1) #define __NR_getppid 150 __SYSCALL(150, sys_getppid, 0) -#define __NR_available151 151 -__SYSCALL(151, sys_ni_syscall, 0) +#define __NR_getpgrp 151 +__SYSCALL(151, sys_getpgrp, 0) #define __NR_reserved152 152 /* set_thread_area */ __SYSCALL(152, sys_ni_syscall, 0) -- cgit v1.2.3-70-g09d2 From b2444d34a0e727a80fee4b725bc5ecb9d0f206f0 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Sat, 4 Aug 2007 09:23:54 -0700 Subject: [XTENSA] Add freestanding option to CFLAGS We also need to set the freestanding option for GCC in the CFLAGS. Signed-off-by: Chris Zankel --- arch/xtensa/Makefile | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile index 95f836db38f..acf05be2492 100644 --- a/arch/xtensa/Makefile +++ b/arch/xtensa/Makefile @@ -27,7 +27,12 @@ platform-$(CONFIG_XTENSA_PLATFORM_ISS) := iss PLATFORM = $(platform-y) export PLATFORM -CFLAGS += -pipe -mlongcalls +# temporarily until string.h is fixed +cflags-y += -ffreestanding + +cflags-y += -pipe -mlongcalls + +CFLAGS += $(cflags-y) KBUILD_DEFCONFIG := iss_defconfig -- cgit v1.2.3-70-g09d2 From 73089cbfdf0c69e061a4fa90d614679e630c6727 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Sat, 4 Aug 2007 09:27:30 -0700 Subject: [XTENSA] Move pre-initialized structures to init_task.c Move all initialization structures for the initial task to it's own file. Signed-off-by: Chris Zankel --- arch/xtensa/kernel/Makefile | 2 +- arch/xtensa/kernel/init_task.c | 38 ++++++++++++++++++++++++++++++++++++++ arch/xtensa/kernel/process.c | 15 +-------------- 3 files changed, 40 insertions(+), 15 deletions(-) create mode 100644 arch/xtensa/kernel/init_task.c diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile index 71f733c4f66..0e3ac686c17 100644 --- a/arch/xtensa/kernel/Makefile +++ b/arch/xtensa/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := head.o vmlinux.lds obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o semaphore.o \ setup.o signal.o syscall.o time.o traps.o vectors.o platform.o \ - pci-dma.o + pci-dma.o init_task.o ## windowspill.o diff --git a/arch/xtensa/kernel/init_task.c b/arch/xtensa/kernel/init_task.c new file mode 100644 index 00000000000..021b4f46ff9 --- /dev/null +++ b/arch/xtensa/kernel/init_task.c @@ -0,0 +1,38 @@ +/* + * arch/xtensa/kernel/init_task.c + * + * Xtensa Processor version. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Tensilica Inc. + * + * Chris Zankel + */ + +#include +#include +#include +#include +#include +#include + +#include + +static struct fs_struct init_fs = INIT_FS; +static struct files_struct init_files = INIT_FILES; +static struct signal_struct init_signals = INIT_SIGNALS(init_signals); +static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); +struct mm_struct init_mm = INIT_MM(init_mm); + +EXPORT_SYMBOL(init_mm); + +union thread_union init_thread_union + __attribute__((__section__(".data.init_task"))) = +{ INIT_THREAD_INFO(init_task) }; + +struct task_struct init_task = INIT_TASK(init_task); + +EXPORT_SYMBOL(init_task); diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index ce758bab95b..f53d7bd9dfb 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -45,20 +46,6 @@ extern void ret_from_fork(void); -static struct fs_struct init_fs = INIT_FS; -static struct files_struct init_files = INIT_FILES; -static struct signal_struct init_signals = INIT_SIGNALS(init_signals); -static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); -struct mm_struct init_mm = INIT_MM(init_mm); -EXPORT_SYMBOL(init_mm); - -union thread_union init_thread_union - __attribute__((__section__(".data.init_task"))) = -{ INIT_THREAD_INFO(init_task) }; - -struct task_struct init_task = INIT_TASK(init_task); -EXPORT_SYMBOL(init_task); - struct task_struct *current_set[NR_CPUS] = {&init_task, }; void (*pm_power_off)(void) = NULL; -- cgit v1.2.3-70-g09d2 From 787a22d1d284b21ad810fd0bedbdefb329f31cd2 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Sat, 4 Aug 2007 14:31:04 -0700 Subject: [XTENSA] Move string-io functions to io.c from pci.c The string-io functions (outs{bwl}, ins{bwl}) are independent from the PCI option and should be in a separate file. Signed-off-by: Chris Zankel --- arch/xtensa/kernel/Makefile | 2 +- arch/xtensa/kernel/io.c | 75 +++++++++++++++++++++++++++++++++++++++++++++ arch/xtensa/kernel/pci.c | 69 ----------------------------------------- 3 files changed, 76 insertions(+), 70 deletions(-) create mode 100644 arch/xtensa/kernel/io.c diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile index 0e3ac686c17..f582d6a24ec 100644 --- a/arch/xtensa/kernel/Makefile +++ b/arch/xtensa/kernel/Makefile @@ -7,7 +7,7 @@ extra-y := head.o vmlinux.lds obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o semaphore.o \ setup.o signal.o syscall.o time.o traps.o vectors.o platform.o \ - pci-dma.o init_task.o + pci-dma.o init_task.o io.o ## windowspill.o diff --git a/arch/xtensa/kernel/io.c b/arch/xtensa/kernel/io.c new file mode 100644 index 00000000000..5b65269b1d2 --- /dev/null +++ b/arch/xtensa/kernel/io.c @@ -0,0 +1,75 @@ +/* + * arch/xtensa/io.c + * + * IO primitives + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Copied from sparc. + * + * Chris Zankel + * + */ + +#include +#include + +void outsb(unsigned long addr, const void *src, unsigned long count) { + while (count) { + count -= 1; + writeb(*(const char *)src, addr); + src += 1; + addr += 1; + } +} + +void outsw(unsigned long addr, const void *src, unsigned long count) { + while (count) { + count -= 2; + writew(*(const short *)src, addr); + src += 2; + addr += 2; + } +} + +void outsl(unsigned long addr, const void *src, unsigned long count) { + while (count) { + count -= 4; + writel(*(const long *)src, addr); + src += 4; + addr += 4; + } +} + +void insb(unsigned long addr, void *dst, unsigned long count) { + while (count) { + count -= 1; + *(unsigned char *)dst = readb(addr); + dst += 1; + addr += 1; + } +} + +void insw(unsigned long addr, void *dst, unsigned long count) { + while (count) { + count -= 2; + *(unsigned short *)dst = readw(addr); + dst += 2; + addr += 2; + } +} + +void insl(unsigned long addr, void *dst, unsigned long count) { + while (count) { + count -= 4; + /* + * XXX I am sure we are in for an unaligned trap here. + */ + *(unsigned long *)dst = readl(addr); + dst += 4; + addr += 4; + } +} diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c index 77deae5290f..b7c073484e0 100644 --- a/arch/xtensa/kernel/pci.c +++ b/arch/xtensa/kernel/pci.c @@ -394,72 +394,3 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, return ret; } - -/* - * This probably belongs here rather than ioport.c because - * we do not want this crud linked into SBus kernels. - * Also, think for a moment about likes of floppy.c that - * include architecture specific parts. They may want to redefine ins/outs. - * - * We do not use horrible macros here because we want to - * advance pointer by sizeof(size). - */ -void outsb(unsigned long addr, const void *src, unsigned long count) { - while (count) { - count -= 1; - writeb(*(const char *)src, addr); - src += 1; - addr += 1; - } -} - -void outsw(unsigned long addr, const void *src, unsigned long count) { - while (count) { - count -= 2; - writew(*(const short *)src, addr); - src += 2; - addr += 2; - } -} - -void outsl(unsigned long addr, const void *src, unsigned long count) { - while (count) { - count -= 4; - writel(*(const long *)src, addr); - src += 4; - addr += 4; - } -} - -void insb(unsigned long addr, void *dst, unsigned long count) { - while (count) { - count -= 1; - *(unsigned char *)dst = readb(addr); - dst += 1; - addr += 1; - } -} - -void insw(unsigned long addr, void *dst, unsigned long count) { - while (count) { - count -= 2; - *(unsigned short *)dst = readw(addr); - dst += 2; - addr += 2; - } -} - -void insl(unsigned long addr, void *dst, unsigned long count) { - while (count) { - count -= 4; - /* - * XXX I am sure we are in for an unaligned trap here. - */ - *(unsigned long *)dst = readl(addr); - dst += 4; - addr += 4; - } -} - - - -- cgit v1.2.3-70-g09d2 From 068732d9b465cafcc56a745c3931f2fc4e58f48f Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Sun, 5 Aug 2007 10:16:54 -0700 Subject: [XTENSA] Remove extraneous include statement We don't need to include processor.h in bug.h. Signed-off-by: Chris Zankel --- include/asm-xtensa/bugs.h | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/include/asm-xtensa/bugs.h b/include/asm-xtensa/bugs.h index c4228532013..69b29d19824 100644 --- a/include/asm-xtensa/bugs.h +++ b/include/asm-xtensa/bugs.h @@ -13,10 +13,6 @@ #ifndef _XTENSA_BUGS_H #define _XTENSA_BUGS_H -#include - -static void __init check_bugs(void) -{ -} +static void check_bugs(void) { } #endif /* _XTENSA_BUGS_H */ -- cgit v1.2.3-70-g09d2 From bc671aa9838f234ccfc794a77325628f1e41e083 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Sun, 5 Aug 2007 10:22:58 -0700 Subject: [XTENSA] Fix fadvise64_64 Xtensa passes long long arguments in a even/odd register pair, so we also need to shuffle the arguments when passed through the system call to avoid an empty argument register. Signed-off-by: Chris Zankel --- arch/xtensa/kernel/syscall.c | 5 +++++ include/asm-xtensa/syscall.h | 2 ++ include/asm-xtensa/unistd.h | 2 +- 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c index fe3834bc1db..f3e16efcd47 100644 --- a/arch/xtensa/kernel/syscall.c +++ b/arch/xtensa/kernel/syscall.c @@ -93,3 +93,8 @@ asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg) return (long)ret; } +asmlinkage long xtensa_fadvise64_64(int fd, int advice, unsigned long long offset, unsigned long long len) +{ + return sys_fadvise64_64(fd, offset, len, advice); +} + diff --git a/include/asm-xtensa/syscall.h b/include/asm-xtensa/syscall.h index ea9b5132215..05cebf8f62b 100644 --- a/include/asm-xtensa/syscall.h +++ b/include/asm-xtensa/syscall.h @@ -28,6 +28,8 @@ asmlinkage long sys_rt_sigaction(int, struct sigaction __user *, size_t); asmlinkage long xtensa_shmat(int, char __user *, int); +asmlinkage long xtensa_fadvise64_64(int, int, + unsigned long long, unsigned long long); /* Should probably move to linux/syscalls.h */ struct pollfd; diff --git a/include/asm-xtensa/unistd.h b/include/asm-xtensa/unistd.h index bed04102407..92968aabe34 100644 --- a/include/asm-xtensa/unistd.h +++ b/include/asm-xtensa/unistd.h @@ -151,7 +151,7 @@ __SYSCALL( 61, sys_fcntl64, 3) #define __NR_available62 62 __SYSCALL( 62, sys_ni_syscall, 0) #define __NR_fadvise64_64 63 -__SYSCALL( 63, sys_fadvise64_64, 6) +__SYSCALL( 63, xtensa_fadvise64_64, 6) #define __NR_utime 64 /* glibc 2.3.3 ?? */ __SYSCALL( 64, sys_utime, 2) #define __NR_utimes 65 -- cgit v1.2.3-70-g09d2 From 2b8aea74e78e977b1f9987e23e3e59f3ef4359f4 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Sun, 5 Aug 2007 10:26:30 -0700 Subject: [XTENSA] Fix timer instabilities. The timer code could have missed a tick. Signed-off-by: Chris Zankel --- arch/xtensa/kernel/time.c | 46 +++++++++++++++++++++++++++++----------------- include/asm-xtensa/timex.h | 4 ++-- 2 files changed, 31 insertions(+), 19 deletions(-) diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index 22949be4a5d..60d29fe0b1b 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -32,12 +32,20 @@ EXPORT_SYMBOL(rtc_lock); #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT unsigned long ccount_per_jiffy; /* per 1/HZ */ -unsigned long ccount_nsec; /* nsec per ccount increment */ +unsigned long nsec_per_ccount; /* nsec per ccount increment */ #endif -unsigned int last_ccount_stamp; static long last_rtc_update = 0; +/* + * Scheduler clock - returns current tim in nanosec units. + */ + +unsigned long long sched_clock(void) +{ + return (unsigned long long)jiffies * (1000000000 / HZ); +} + static irqreturn_t timer_interrupt(int irq, void *dev_id); static struct irqaction timer_irqaction = { .handler = timer_interrupt, @@ -69,7 +77,6 @@ void __init time_init(void) xtime.tv_nsec = 0; last_rtc_update = xtime.tv_sec = sec_n; - last_ccount_stamp = get_ccount(); set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); @@ -85,7 +92,7 @@ int do_settimeofday(struct timespec *tv) { time_t wtm_sec, sec = tv->tv_sec; long wtm_nsec, nsec = tv->tv_nsec; - unsigned long ccount; + unsigned long delta; if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) return -EINVAL; @@ -97,8 +104,10 @@ int do_settimeofday(struct timespec *tv) * wall time. Discover what correction gettimeofday() would have * made, and then undo it! */ - ccount = get_ccount(); - nsec -= (ccount - last_ccount_stamp) * CCOUNT_NSEC; + + delta = CCOUNT_PER_JIFFY; + delta += get_ccount() - get_linux_timer(); + nsec -= delta * NSEC_PER_CCOUNT; wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); @@ -117,17 +126,21 @@ EXPORT_SYMBOL(do_settimeofday); void do_gettimeofday(struct timeval *tv) { unsigned long flags; - unsigned long sec, usec, delta, seq; + unsigned long volatile sec, usec, delta, seq; do { seq = read_seqbegin_irqsave(&xtime_lock, flags); - delta = get_ccount() - last_ccount_stamp; sec = xtime.tv_sec; usec = (xtime.tv_nsec / NSEC_PER_USEC); + + delta = get_linux_timer() - get_ccount(); + } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - usec += (delta * CCOUNT_NSEC) / NSEC_PER_USEC; + usec += (((unsigned long) CCOUNT_PER_JIFFY - delta) + * (unsigned long) NSEC_PER_CCOUNT) / NSEC_PER_USEC; + for (; usec >= 1000000; sec++, usec -= 1000000) ; @@ -158,9 +171,12 @@ again: write_seqlock(&xtime_lock); - last_ccount_stamp = next; + do_timer(1); /* Linux handler in kernel/timer.c */ + + /* Note that writing CCOMPARE clears the interrupt. */ + next += CCOUNT_PER_JIFFY; - do_timer (1); /* Linux handler in kernel/timer.c */ + set_linux_timer(next); if (ntp_synced() && xtime.tv_sec - last_rtc_update >= 659 && @@ -175,19 +191,15 @@ again: write_sequnlock(&xtime_lock); } - /* NOTE: writing CCOMPAREn clears the interrupt. */ + /* Allow platform to do something useful (Wdog). */ - set_linux_timer (next); + platform_heartbeat(); /* Make sure we didn't miss any tick... */ if ((signed long)(get_ccount() - next) > 0) goto again; - /* Allow platform to do something useful (Wdog). */ - - platform_heartbeat(); - return IRQ_HANDLED; } diff --git a/include/asm-xtensa/timex.h b/include/asm-xtensa/timex.h index 28c7985a400..a5fca59fba9 100644 --- a/include/asm-xtensa/timex.h +++ b/include/asm-xtensa/timex.h @@ -41,10 +41,10 @@ extern unsigned long ccount_per_jiffy; extern unsigned long ccount_nsec; #define CCOUNT_PER_JIFFY ccount_per_jiffy -#define CCOUNT_NSEC ccount_nsec +#define NSEC_PER_CCOUNT ccount_nsec #else #define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ)) -#define CCOUNT_NSEC (1000000000UL / CONFIG_XTENSA_CPU_CLOCK) +#define NSEC_PER_CCOUNT (1000UL / CONFIG_XTENSA_CPU_CLOCK) #endif -- cgit v1.2.3-70-g09d2 From 24a9ab7fa143498802b35c66de10cc3cfdac2c51 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Sun, 5 Aug 2007 11:24:13 -0700 Subject: [XTENSA] Add typecast macro for constants Add macros (__XTENSA_UL and __XTENSA_UL_CONST) for typecasting constants. Signed-off-by: Chris Zankel --- include/asm-xtensa/processor.h | 2 +- include/asm-xtensa/types.h | 9 +++++++++ 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/include/asm-xtensa/processor.h b/include/asm-xtensa/processor.h index 4feb9f7f35a..35145bcd96e 100644 --- a/include/asm-xtensa/processor.h +++ b/include/asm-xtensa/processor.h @@ -33,7 +33,7 @@ * the 1 GB requirement applies to the stack as well. */ -#define TASK_SIZE 0x40000000 +#define TASK_SIZE __XTENSA_UL_CONST(0x40000000) /* * General exception cause assigned to debug exceptions. Debug exceptions go diff --git a/include/asm-xtensa/types.h b/include/asm-xtensa/types.h index 9d99a8e9e33..f1e84526f99 100644 --- a/include/asm-xtensa/types.h +++ b/include/asm-xtensa/types.h @@ -11,6 +11,15 @@ #ifndef _XTENSA_TYPES_H #define _XTENSA_TYPES_H + +#ifdef __ASSEMBLY__ +# define __XTENSA_UL(x) (x) +# define __XTENSA_UL_CONST(x) x +#else +# define __XTENSA_UL(x) ((unsigned long)(x)) +# define __XTENSA_UL_CONST(x) x##UL +#endif + #ifndef __ASSEMBLY__ typedef unsigned short umode_t; -- cgit v1.2.3-70-g09d2 From 5c1c8085b5dc30ae4ff0ee54039e387ed59262bf Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Sun, 5 Aug 2007 11:51:57 -0700 Subject: [XTENSA] Initialize semaphore_wake_lock Initialize semaphore_wake_lock. Signed-off-by: Chris Zankel --- arch/xtensa/kernel/semaphore.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/xtensa/kernel/semaphore.c b/arch/xtensa/kernel/semaphore.c index d40f4b1b75a..995c6410ae1 100644 --- a/arch/xtensa/kernel/semaphore.c +++ b/arch/xtensa/kernel/semaphore.c @@ -100,7 +100,7 @@ static __inline__ int waking_non_zero_trylock(struct semaphore *sem) return ret; } -spinlock_t semaphore_wake_lock; +DEFINE_SPINLOCK(semaphore_wake_lock); /* * Semaphores are implemented using a two-way counter: -- cgit v1.2.3-70-g09d2 From 26465f2f4f5a253f22596fc9245a6bb5c0856ee1 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Mon, 6 Aug 2007 23:12:24 -0700 Subject: [XTENSA] Use the generic version of get_order Use the generic version of get_order for processor configurations that don't have the 'nsa/nsau' instructions. Signed-off-by: Chris Zankel --- include/asm-xtensa/page.h | 50 +++++++++++++++++++++-------------------------- 1 file changed, 22 insertions(+), 28 deletions(-) diff --git a/include/asm-xtensa/page.h b/include/asm-xtensa/page.h index 1213cde7543..2d6ac21136c 100644 --- a/include/asm-xtensa/page.h +++ b/include/asm-xtensa/page.h @@ -1,11 +1,11 @@ /* - * linux/include/asm-xtensa/page.h + * include/asm-xtensa/page.h * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version2 as * published by the Free Software Foundation. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2007 Tensilica Inc. */ #ifndef _XTENSA_PAGE_H @@ -14,6 +14,11 @@ #ifdef __KERNEL__ #include +#include + +/* + * Fixed TLB translations in the processor. + */ #define XCHAL_KSEG_CACHED_VADDR 0xd0000000 #define XCHAL_KSEG_BYPASS_VADDR 0xd8000000 @@ -26,13 +31,13 @@ */ #define PAGE_SHIFT 12 -#define PAGE_SIZE (1 << PAGE_SHIFT) +#define PAGE_SIZE (__XTENSA_UL_CONST(1) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) #define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE - 1) & PAGE_MASK) #define PAGE_OFFSET XCHAL_KSEG_CACHED_VADDR -#define MAX_MEM_PFN XCHAL_KSEG_SIZE -#define PGTABLE_START 0x80000000 +#define MAX_MEM_PFN XCHAL_KSEG_SIZE +#define PGTABLE_START 0x80000000 #ifdef __ASSEMBLY__ @@ -58,34 +63,23 @@ typedef struct { unsigned long pgprot; } pgprot_t; /* * Pure 2^n version of get_order + * Use 'nsau' instructions if supported by the processor or the generic version. */ -static inline int get_order(unsigned long size) +#if XCHAL_HAVE_NSA + +static inline __attribute_const__ int get_order(unsigned long size) { - int order; -#ifndef XCHAL_HAVE_NSU - unsigned long x1, x2, x4, x8, x16; - - size = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; - x1 = size & 0xAAAAAAAA; - x2 = size & 0xCCCCCCCC; - x4 = size & 0xF0F0F0F0; - x8 = size & 0xFF00FF00; - x16 = size & 0xFFFF0000; - order = x2 ? 2 : 0; - order += (x16 != 0) * 16; - order += (x8 != 0) * 8; - order += (x4 != 0) * 4; - order += (x1 != 0); - - return order; -#else - size = (size - 1) >> PAGE_SHIFT; - asm ("nsau %0, %1" : "=r" (order) : "r" (size)); - return 32 - order; -#endif + int lz; + asm ("nsau %0, %1" : "=r" (lz) : "r" ((size - 1) >> PAGE_SHIFT)); + return 32 - lz; } +#else + +# include + +#endif struct page; extern void clear_page(void *page); -- cgit v1.2.3-70-g09d2 From 01858d1b0b406307626bbc01238391b06aae2c20 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Mon, 6 Aug 2007 23:57:57 -0700 Subject: [XTENSA] Add support for executable/non-executable feature in the mmu Newer processor versions starting with Xtensa6/LX2 support an 'executable' bit for memory pages. This bit replaces the 'valid' bit, so it must be always set to one for older processor versions. To mark a page invalid, we now set the cache-attributes to b11, which is backward compatible. Signed-off-by: Chris Zankel --- arch/xtensa/kernel/entry.S | 42 ++++++--- include/asm-xtensa/pgtable.h | 213 ++++++++++++++++++++----------------------- 2 files changed, 129 insertions(+), 126 deletions(-) diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 8dc7a2c26ff..65741e3368e 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -1572,10 +1572,12 @@ ENTRY(fast_second_level_miss) l32i a0, a1, TASK_MM # tsk->mm beqz a0, 9f -8: rsr a1, EXCVADDR # fault address - _PGD_OFFSET(a0, a1, a1) + + /* We deliberately destroy a3 that holds the exception table. */ + +8: rsr a3, EXCVADDR # fault address + _PGD_OFFSET(a0, a3, a1) l32i a0, a0, 0 # read pmdval - //beqi a0, _PAGE_USER, 2f beqz a0, 2f /* Read ptevaddr and convert to top of page-table page. @@ -1596,20 +1598,34 @@ ENTRY(fast_second_level_miss) extui a1, a0, 0, PAGE_SHIFT # ... & PAGE_MASK xor a0, a0, a1 - - movi a1, PAGE_DIRECTORY + movi a1, _PAGE_DIRECTORY or a0, a0, a1 # ... | PAGE_DIRECTORY + /* + * We utilize all three wired-ways (7-9( to hold pmd translations. + * Memory regions are mapped to the DTLBs according to bits 28 and 29. + * This allows to map the three most common regions to three different + * DTLBs: + * 0,1 -> way 7 program (0040.0000) and virtual (c000.0000) + * 2 -> way 8 shared libaries (2000.0000) + * 3 -> way 0 stack (3000.0000) + */ + + extui a3, a3, 28, 2 # addr. bit 28 and 29 0,1,2,3 rsr a1, PTEVADDR + addx2 a3, a3, a3 # -> 0,3,6,9 srli a1, a1, PAGE_SHIFT + extui a3, a3, 2, 2 # -> 0,0,1,2 slli a1, a1, PAGE_SHIFT # ptevaddr & PAGE_MASK - addi a1, a1, DTLB_WAY_PGD # ... + way_number + addi a3, a3, DTLB_WAY_PGD + add a1, a1, a3 # ... + way_number - wdtlb a0, a1 +3: wdtlb a0, a1 dsync /* Exit critical section. */ +4: movi a3, exc_table # restore a3 movi a0, 0 s32i a0, a3, EXC_TABLE_FIXUP @@ -1638,6 +1654,7 @@ ENTRY(fast_second_level_miss) 2: /* Invalid PGD, default exception handling */ + movi a3, exc_table rsr a1, DEPC xsr a3, EXCSAVE_1 s32i a1, a2, PT_AREG2 @@ -1682,15 +1699,15 @@ ENTRY(fast_store_prohibited) 8: rsr a1, EXCVADDR # fault address _PGD_OFFSET(a0, a1, a4) l32i a0, a0, 0 - //beqi a0, _PAGE_USER, 2f # FIXME use _PAGE_INVALID beqz a0, 2f + /* Note that we assume _PAGE_WRITABLE_BIT is only set if pte is valid.*/ + _PTE_OFFSET(a0, a1, a4) l32i a4, a0, 0 # read pteval - movi a1, _PAGE_VALID | _PAGE_RW - bnall a4, a1, 2f + bbci.l a4, _PAGE_WRITABLE_BIT, 2f - movi a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_WRENABLE + movi a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HW_WRITE or a4, a4, a1 rsr a1, EXCVADDR s32i a4, a0, 0 @@ -1700,10 +1717,7 @@ ENTRY(fast_store_prohibited) dhwb a0, 0 #endif pdtlb a0, a1 - beqz a0, 1f - idtlb a0 // FIXME do we need this? wdtlb a4, a0 -1: /* Exit critical section. */ diff --git a/include/asm-xtensa/pgtable.h b/include/asm-xtensa/pgtable.h index 06850f3b26a..667a6c46b5a 100644 --- a/include/asm-xtensa/pgtable.h +++ b/include/asm-xtensa/pgtable.h @@ -2,10 +2,10 @@ * linux/include/asm-xtensa/pgtable.h * * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version2 as + * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2007 Tensilica Inc. */ #ifndef _XTENSA_PGTABLE_H @@ -23,7 +23,7 @@ /* * The Xtensa architecture port of Linux has a two-level page table system, - * i.e. the logical three-level Linux page table layout are folded. + * i.e. the logical three-level Linux page table layout is folded. * Each task has the following memory page tables: * * PGD table (page directory), ie. 3rd-level page table: @@ -43,6 +43,7 @@ * * The individual pages are 4 kB big with special pages for the empty_zero_page. */ + #define PGDIR_SHIFT 22 #define PGDIR_SIZE (1UL << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) @@ -53,12 +54,10 @@ */ #define PTRS_PER_PTE 1024 #define PTRS_PER_PTE_SHIFT 10 -#define PTRS_PER_PMD 1 #define PTRS_PER_PGD 1024 #define PGD_ORDER 0 -#define PMD_ORDER 0 #define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 +#define FIRST_USER_ADDRESS 0 #define FIRST_USER_PGD_NR (FIRST_USER_ADDRESS >> PGDIR_SHIFT) /* virtual memory area. We keep a distance to other memory regions to be @@ -86,47 +85,54 @@ * See further below for PTE layout for swapped-out pages. */ -#define _PAGE_VALID (1<<0) /* hardware: page is accessible */ -#define _PAGE_WRENABLE (1<<1) /* hardware: page is writable */ +#define _PAGE_HW_EXEC (1<<0) /* hardware: page is executable */ +#define _PAGE_HW_WRITE (1<<1) /* hardware: page is writable */ + +#define _PAGE_FILE (1<<1) /* non-linear mapping, if !present */ +#define _PAGE_PROTNONE (3<<0) /* special case for VM_PROT_NONE */ /* None of these cache modes include MP coherency: */ -#define _PAGE_NO_CACHE (0<<2) /* bypass, non-speculative */ -#if XCHAL_DCACHE_IS_WRITEBACK -# define _PAGE_WRITEBACK (1<<2) /* write back */ -# define _PAGE_WRITETHRU (2<<2) /* write through */ -#else -# define _PAGE_WRITEBACK (1<<2) /* assume write through */ -# define _PAGE_WRITETHRU (1<<2) -#endif -#define _PAGE_NOALLOC (3<<2) /* don't allocate cache,if not cached */ -#define _CACHE_MASK (3<<2) +#define _PAGE_CA_BYPASS (0<<2) /* bypass, non-speculative */ +#define _PAGE_CA_WB (1<<2) /* write-back */ +#define _PAGE_CA_WT (2<<2) /* write-through */ +#define _PAGE_CA_MASK (3<<2) +#define _PAGE_INVALID (3<<2) #define _PAGE_USER (1<<4) /* user access (ring=1) */ -#define _PAGE_KERNEL (0<<4) /* kernel access (ring=0) */ /* Software */ -#define _PAGE_RW (1<<6) /* software: page writable */ +#define _PAGE_WRITABLE_BIT 6 +#define _PAGE_WRITABLE (1<<6) /* software: page writable */ #define _PAGE_DIRTY (1<<7) /* software: page dirty */ #define _PAGE_ACCESSED (1<<8) /* software: page accessed (read) */ -#define _PAGE_FILE (1<<9) /* nonlinear file mapping*/ -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _CACHE_MASK | _PAGE_DIRTY) -#define _PAGE_PRESENT ( _PAGE_VALID | _PAGE_WRITEBACK | _PAGE_ACCESSED) +/* On older HW revisions, we always have to set bit 0 */ +#if XCHAL_HW_VERSION_MAJOR < 2000 +# define _PAGE_VALID (1<<0) +#else +# define _PAGE_VALID 0 +#endif + +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) +#define _PAGE_PRESENT (_PAGE_VALID | _PAGE_CA_WB | _PAGE_ACCESSED) #ifdef CONFIG_MMU -# define PAGE_NONE __pgprot(_PAGE_PRESENT) -# define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_RW) -# define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER) -# define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER) -# define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_KERNEL | _PAGE_WRENABLE) -# define PAGE_INVALID __pgprot(_PAGE_USER) - -# if (DCACHE_WAY_SIZE > PAGE_SIZE) -# define PAGE_DIRECTORY __pgprot(_PAGE_VALID | _PAGE_ACCESSED | _PAGE_KERNEL) -# else -# define PAGE_DIRECTORY __pgprot(_PAGE_PRESENT | _PAGE_KERNEL) -# endif +#define PAGE_NONE __pgprot(_PAGE_INVALID | _PAGE_USER | _PAGE_PROTNONE) +#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER) +#define PAGE_COPY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_HW_EXEC) +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER) +#define PAGE_READONLY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_HW_EXEC) +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_WRITABLE) +#define PAGE_SHARED_EXEC \ + __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_WRITABLE | _PAGE_HW_EXEC) +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT) + +#if (DCACHE_WAY_SIZE > PAGE_SIZE) +# define _PAGE_DIRECTORY (_PAGE_VALID | _PAGE_ACCESSED | _PAGE_HW_WRITE) +#else +# define _PAGE_DIRECTORY (_PAGE_VALID|_PAGE_ACCESSED|_PAGE_HW_WRITE|_PAGE_CA_WB) +#endif #else /* no mmu */ @@ -145,23 +151,23 @@ * What follows is the closest we can get by reasonable means.. * See linux/mm/mmap.c for protection_map[] array that uses these definitions. */ -#define __P000 PAGE_NONE /* private --- */ -#define __P001 PAGE_READONLY /* private --r */ -#define __P010 PAGE_COPY /* private -w- */ -#define __P011 PAGE_COPY /* private -wr */ -#define __P100 PAGE_READONLY /* private x-- */ -#define __P101 PAGE_READONLY /* private x-r */ -#define __P110 PAGE_COPY /* private xw- */ -#define __P111 PAGE_COPY /* private xwr */ - -#define __S000 PAGE_NONE /* shared --- */ -#define __S001 PAGE_READONLY /* shared --r */ -#define __S010 PAGE_SHARED /* shared -w- */ -#define __S011 PAGE_SHARED /* shared -wr */ -#define __S100 PAGE_READONLY /* shared x-- */ -#define __S101 PAGE_READONLY /* shared x-r */ -#define __S110 PAGE_SHARED /* shared xw- */ -#define __S111 PAGE_SHARED /* shared xwr */ +#define __P000 PAGE_NONE /* private --- */ +#define __P001 PAGE_READONLY /* private --r */ +#define __P010 PAGE_COPY /* private -w- */ +#define __P011 PAGE_COPY /* private -wr */ +#define __P100 PAGE_READONLY_EXEC /* private x-- */ +#define __P101 PAGE_READONLY_EXEC /* private x-r */ +#define __P110 PAGE_COPY_EXEC /* private xw- */ +#define __P111 PAGE_COPY_EXEC /* private xwr */ + +#define __S000 PAGE_NONE /* shared --- */ +#define __S001 PAGE_READONLY /* shared --r */ +#define __S010 PAGE_SHARED /* shared -w- */ +#define __S011 PAGE_SHARED /* shared -wr */ +#define __S100 PAGE_READONLY_EXEC /* shared x-- */ +#define __S101 PAGE_READONLY_EXEC /* shared x-r */ +#define __S110 PAGE_SHARED_EXEC /* shared xw- */ +#define __S111 PAGE_SHARED_EXEC /* shared xwr */ #ifndef __ASSEMBLY__ @@ -183,35 +189,42 @@ extern pgd_t swapper_pg_dir[PAGE_SIZE/sizeof(pgd_t)]; #define pmd_page(pmd) virt_to_page(pmd_val(pmd)) /* - * The following only work if pte_present() is true. + * pte status. */ -#define pte_none(pte) (!(pte_val(pte) ^ _PAGE_USER)) -#define pte_present(pte) (pte_val(pte) & _PAGE_VALID) +#define pte_none(pte) (pte_val(pte) == _PAGE_INVALID) +#define pte_present(pte) \ + (((pte_val(pte) & _PAGE_CA_MASK) != _PAGE_INVALID) \ + || ((pte_val(pte) & _PAGE_PROTNONE) == _PAGE_PROTNONE)) #define pte_clear(mm,addr,ptep) \ - do { update_pte(ptep, __pte(_PAGE_USER)); } while(0) + do { update_pte(ptep, __pte(_PAGE_INVALID)); } while(0) #define pmd_none(pmd) (!pmd_val(pmd)) #define pmd_present(pmd) (pmd_val(pmd) & PAGE_MASK) -#define pmd_clear(pmdp) do { set_pmd(pmdp, __pmd(0)); } while (0) #define pmd_bad(pmd) (pmd_val(pmd) & ~PAGE_MASK) +#define pmd_clear(pmdp) do { set_pmd(pmdp, __pmd(0)); } while (0) -/* Note: We use the _PAGE_USER bit to indicate write-protect kernel memory */ - -static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; } +static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITABLE; } static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } -static inline pte_t pte_wrprotect(pte_t pte) { pte_val(pte) &= ~(_PAGE_RW | _PAGE_WRENABLE); return pte; } -static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; } -static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkwrite(pte_t pte) { pte_val(pte) |= _PAGE_RW; return pte; } +static inline pte_t pte_wrprotect(pte_t pte) + { pte_val(pte) &= ~(_PAGE_WRITABLE | _PAGE_HW_WRITE); return pte; } +static inline pte_t pte_mkclean(pte_t pte) + { pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HW_WRITE); return pte; } +static inline pte_t pte_mkold(pte_t pte) + { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkdirty(pte_t pte) + { pte_val(pte) |= _PAGE_DIRTY; return pte; } +static inline pte_t pte_mkyoung(pte_t pte) + { pte_val(pte) |= _PAGE_ACCESSED; return pte; } +static inline pte_t pte_mkwrite(pte_t pte) + { pte_val(pte) |= _PAGE_WRITABLE; return pte; } /* * Conversion functions: convert a page and protection to a page entry, * and a page entry and page directory to the page they refer to. */ + #define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) #define pte_same(a,b) (pte_val(a) == pte_val(b)) #define pte_page(x) pfn_to_page(pte_pfn(x)) @@ -231,9 +244,6 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) static inline void update_pte(pte_t *ptep, pte_t pteval) { *ptep = pteval; -#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK - __asm__ __volatile__ ("memw; dhwb %0, 0; dsync" :: "a" (ptep)); -#endif } struct mm_struct; @@ -249,9 +259,6 @@ static inline void set_pmd(pmd_t *pmdp, pmd_t pmdval) { *pmdp = pmdval; -#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK - __asm__ __volatile__ ("memw; dhwb %0, 0; dsync" :: "a" (pmdp)); -#endif } struct vm_area_struct; @@ -306,52 +313,34 @@ ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) /* * Encode and decode a swap entry. - * Each PTE in a process VM's page table is either: - * "present" -- valid and not swapped out, protection bits are meaningful; - * "not present" -- which further subdivides in these two cases: - * "none" -- no mapping at all; identified by pte_none(), set by pte_clear( - * "swapped out" -- the page is swapped out, and the SWP macros below - * are used to store swap file info in the PTE itself. - * - * In the Xtensa processor MMU, any PTE entries in user space (or anywhere - * in virtual memory that can map differently across address spaces) - * must have a correct ring value that represents the RASID field that - * is changed when switching address spaces. Eg. such PTE entries cannot - * be set to ring zero, because that can cause a (global) kernel ASID - * entry to be created in the TLBs (even with invalid cache attribute), - * potentially causing a multihit exception when going back to another - * address space that mapped the same virtual address at another ring. - * - * SO: we avoid using ring bits (_PAGE_RING_MASK) in "not present" PTEs. - * We also avoid using the _PAGE_VALID bit which must be zero for non-present - * pages. * - * We end up with the following available bits: 1..3 and 7..31. - * We don't bother with 1..3 for now (we can use them later if needed), - * and chose to allocate 6 bits for SWP_TYPE and the remaining 19 bits - * for SWP_OFFSET. At least 5 bits are needed for SWP_TYPE, because it - * is currently implemented as an index into swap_info[MAX_SWAPFILES] - * and MAX_SWAPFILES is currently defined as 32 in . - * However, for some reason all other architectures in the 2.4 kernel - * reserve either 6, 7, or 8 bits so I'll not detract from that for now. :) - * SWP_OFFSET is an offset into the swap file in page-size units, so - * with 4 kB pages, 19 bits supports a maximum swap file size of 2 GB. - * - * FIXME: 2 GB isn't very big. Other bits can be used to allow - * larger swap sizes. In the meantime, it appears relatively easy to get - * around the 2 GB limitation by simply using multiple swap files. + * Format of swap pte: + * bit 0 MBZ + * bit 1 page-file (must be zero) + * bits 2 - 3 page hw access mode (must be 11: _PAGE_INVALID) + * bits 4 - 5 ring protection (must be 01: _PAGE_USER) + * bits 6 - 10 swap type (5 bits -> 32 types) + * bits 11 - 31 swap offset / PAGE_SIZE (21 bits -> 8GB) + + * Format of file pte: + * bit 0 MBZ + * bit 1 page-file (must be one: _PAGE_FILE) + * bits 2 - 3 page hw access mode (must be 11: _PAGE_INVALID) + * bits 4 - 5 ring protection (must be 01: _PAGE_USER) + * bits 6 - 31 file offset / PAGE_SIZE */ -#define __swp_type(entry) (((entry).val >> 7) & 0x3f) -#define __swp_offset(entry) ((entry).val >> 13) -#define __swp_entry(type,offs) ((swp_entry_t) {((type) << 7) | ((offs) << 13)}) +#define __swp_type(entry) (((entry).val >> 6) & 0x1f) +#define __swp_offset(entry) ((entry).val >> 11) +#define __swp_entry(type,offs) \ + ((swp_entry_t) {((type) << 6) | ((offs) << 11) | _PAGE_INVALID}) #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) #define __swp_entry_to_pte(x) ((pte_t) { (x).val }) -#define PTE_FILE_MAX_BITS 29 -#define pte_to_pgoff(pte) (pte_val(pte) >> 3) -#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE }) - +#define PTE_FILE_MAX_BITS 28 +#define pte_to_pgoff(pte) (pte_val(pte) >> 4) +#define pgoff_to_pte(off) \ + ((pte_t) { ((off) << 4) | _PAGE_INVALID | _PAGE_FILE }) #endif /* !defined (__ASSEMBLY__) */ -- cgit v1.2.3-70-g09d2 From ff6fd469885aafa5ec387babcb6537f3c00d6df0 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Tue, 14 Aug 2007 13:02:06 -0700 Subject: [XTENSA] Add kernel module support Add kernel module support. Signed-off-by: Chris Zankel --- arch/xtensa/kernel/module.c | 195 ++++++++++++++++++++++++++++++++++++++++---- include/asm-xtensa/elf.h | 50 ++++++++++++ 2 files changed, 227 insertions(+), 18 deletions(-) diff --git a/arch/xtensa/kernel/module.c b/arch/xtensa/kernel/module.c index 2ea1755a085..ddf14dcf2ad 100644 --- a/arch/xtensa/kernel/module.c +++ b/arch/xtensa/kernel/module.c @@ -7,7 +7,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2006 Tensilica Inc. * * Chris Zankel * @@ -22,57 +22,216 @@ #include #include -LIST_HEAD(module_buf_list); +#undef DEBUG_RELOCATE void *module_alloc(unsigned long size) { - panic("module_alloc not implemented"); + if (size == 0) + return NULL; + return vmalloc(size); } void module_free(struct module *mod, void *module_region) { - panic("module_free not implemented"); + vfree(module_region); + /* FIXME: If module_region == mod->init_region, trim exception + table entries. */ } int module_frob_arch_sections(Elf32_Ehdr *hdr, Elf32_Shdr *sechdrs, char *secstrings, - struct module *me) + struct module *mod) { - panic("module_frob_arch_sections not implemented"); + return 0; +} + +static int +decode_calln_opcode (unsigned char *location) +{ +#ifdef __XTENSA_EB__ + return (location[0] & 0xf0) == 0x50; +#endif +#ifdef __XTENSA_EL__ + return (location[0] & 0xf) == 0x5; +#endif +} + +static int +decode_l32r_opcode (unsigned char *location) +{ +#ifdef __XTENSA_EB__ + return (location[0] & 0xf0) == 0x10; +#endif +#ifdef __XTENSA_EL__ + return (location[0] & 0xf) == 0x1; +#endif } int apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, unsigned int relsec, - struct module *module) + struct module *mod) { - panic ("apply_relocate not implemented"); + printk(KERN_ERR "module %s: REL RELOCATION unsupported\n", + mod->name); + return -ENOEXEC; + } int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, unsigned int relsec, - struct module *module) + struct module *mod) { - panic("apply_relocate_add not implemented"); + unsigned int i; + Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr; + Elf32_Sym *sym; + unsigned char *location; + uint32_t value; + +#ifdef DEBUG_RELOCATE + printk("Applying relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); +#endif + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) { + location = (char *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rela[i].r_offset; + sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + + ELF32_R_SYM(rela[i].r_info); + value = sym->st_value + rela[i].r_addend; + + switch (ELF32_R_TYPE(rela[i].r_info)) { + case R_XTENSA_NONE: + case R_XTENSA_DIFF8: + case R_XTENSA_DIFF16: + case R_XTENSA_DIFF32: + case R_XTENSA_ASM_EXPAND: + break; + + case R_XTENSA_32: + case R_XTENSA_PLT: + *(uint32_t *)location += value; + break; + + case R_XTENSA_SLOT0_OP: + if (decode_calln_opcode(location)) { + value -= ((unsigned long)location & -4) + 4; + if ((value & 3) != 0 || + ((value + (1 << 19)) >> 20) != 0) { + printk("%s: relocation out of range, " + "section %d reloc %d " + "sym '%s'\n", + mod->name, relsec, i, + strtab + sym->st_name); + return -ENOEXEC; + } + value = (signed int)value >> 2; +#ifdef __XTENSA_EB__ + location[0] = ((location[0] & ~0x3) | + ((value >> 16) & 0x3)); + location[1] = (value >> 8) & 0xff; + location[2] = value & 0xff; +#endif +#ifdef __XTENSA_EL__ + location[0] = ((location[0] & ~0xc0) | + ((value << 6) & 0xc0)); + location[1] = (value >> 2) & 0xff; + location[2] = (value >> 10) & 0xff; +#endif + } else if (decode_l32r_opcode(location)) { + value -= (((unsigned long)location + 3) & -4); + if ((value & 3) != 0 || + (signed int)value >> 18 != -1) { + printk("%s: relocation out of range, " + "section %d reloc %d " + "sym '%s'\n", + mod->name, relsec, i, + strtab + sym->st_name); + return -ENOEXEC; + } + value = (signed int)value >> 2; + +#ifdef __XTENSA_EB__ + location[1] = (value >> 8) & 0xff; + location[2] = value & 0xff; +#endif +#ifdef __XTENSA_EL__ + location[1] = value & 0xff; + location[2] = (value >> 8) & 0xff; +#endif + } + /* FIXME: Ignore any other opcodes. The Xtensa + assembler currently assumes that the linker will + always do relaxation and so all PC-relative + operands need relocations. (The assembler also + writes out the tentative PC-relative values, + assuming no link-time relaxation, so it is usually + safe to ignore the relocations.) If the + assembler's "--no-link-relax" flag can be made to + work, and if all kernel modules can be assembled + with that flag, then unexpected relocations could + be detected here. */ + break; + + case R_XTENSA_SLOT1_OP: + case R_XTENSA_SLOT2_OP: + case R_XTENSA_SLOT3_OP: + case R_XTENSA_SLOT4_OP: + case R_XTENSA_SLOT5_OP: + case R_XTENSA_SLOT6_OP: + case R_XTENSA_SLOT7_OP: + case R_XTENSA_SLOT8_OP: + case R_XTENSA_SLOT9_OP: + case R_XTENSA_SLOT10_OP: + case R_XTENSA_SLOT11_OP: + case R_XTENSA_SLOT12_OP: + case R_XTENSA_SLOT13_OP: + case R_XTENSA_SLOT14_OP: + printk("%s: unexpected FLIX relocation: %u\n", + mod->name, + ELF32_R_TYPE(rela[i].r_info)); + return -ENOEXEC; + + case R_XTENSA_SLOT0_ALT: + case R_XTENSA_SLOT1_ALT: + case R_XTENSA_SLOT2_ALT: + case R_XTENSA_SLOT3_ALT: + case R_XTENSA_SLOT4_ALT: + case R_XTENSA_SLOT5_ALT: + case R_XTENSA_SLOT6_ALT: + case R_XTENSA_SLOT7_ALT: + case R_XTENSA_SLOT8_ALT: + case R_XTENSA_SLOT9_ALT: + case R_XTENSA_SLOT10_ALT: + case R_XTENSA_SLOT11_ALT: + case R_XTENSA_SLOT12_ALT: + case R_XTENSA_SLOT13_ALT: + case R_XTENSA_SLOT14_ALT: + printk("%s: unexpected ALT relocation: %u\n", + mod->name, + ELF32_R_TYPE(rela[i].r_info)); + return -ENOEXEC; + + default: + printk("%s: unexpected relocation: %u\n", + mod->name, + ELF32_R_TYPE(rela[i].r_info)); + return -ENOEXEC; + } + } + return 0; } int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, - struct module *me) + struct module *mod) { - panic ("module_finalize not implemented"); + return 0; } void module_arch_cleanup(struct module *mod) { - panic("module_arch_cleanup not implemented"); -} - -struct bug_entry *module_find_bug(unsigned long bugaddr) -{ - panic("module_find_bug not implemented"); } diff --git a/include/asm-xtensa/elf.h b/include/asm-xtensa/elf.h index 1569b53cec9..7083d46766a 100644 --- a/include/asm-xtensa/elf.h +++ b/include/asm-xtensa/elf.h @@ -20,6 +20,56 @@ #define EM_XTENSA 94 #define EM_XTENSA_OLD 0xABC7 +/* Xtensa relocations defined by the ABIs */ + +#define R_XTENSA_NONE 0 +#define R_XTENSA_32 1 +#define R_XTENSA_RTLD 2 +#define R_XTENSA_GLOB_DAT 3 +#define R_XTENSA_JMP_SLOT 4 +#define R_XTENSA_RELATIVE 5 +#define R_XTENSA_PLT 6 +#define R_XTENSA_OP0 8 +#define R_XTENSA_OP1 9 +#define R_XTENSA_OP2 10 +#define R_XTENSA_ASM_EXPAND 11 +#define R_XTENSA_ASM_SIMPLIFY 12 +#define R_XTENSA_GNU_VTINHERIT 15 +#define R_XTENSA_GNU_VTENTRY 16 +#define R_XTENSA_DIFF8 17 +#define R_XTENSA_DIFF16 18 +#define R_XTENSA_DIFF32 19 +#define R_XTENSA_SLOT0_OP 20 +#define R_XTENSA_SLOT1_OP 21 +#define R_XTENSA_SLOT2_OP 22 +#define R_XTENSA_SLOT3_OP 23 +#define R_XTENSA_SLOT4_OP 24 +#define R_XTENSA_SLOT5_OP 25 +#define R_XTENSA_SLOT6_OP 26 +#define R_XTENSA_SLOT7_OP 27 +#define R_XTENSA_SLOT8_OP 28 +#define R_XTENSA_SLOT9_OP 29 +#define R_XTENSA_SLOT10_OP 30 +#define R_XTENSA_SLOT11_OP 31 +#define R_XTENSA_SLOT12_OP 32 +#define R_XTENSA_SLOT13_OP 33 +#define R_XTENSA_SLOT14_OP 34 +#define R_XTENSA_SLOT0_ALT 35 +#define R_XTENSA_SLOT1_ALT 36 +#define R_XTENSA_SLOT2_ALT 37 +#define R_XTENSA_SLOT3_ALT 38 +#define R_XTENSA_SLOT4_ALT 39 +#define R_XTENSA_SLOT5_ALT 40 +#define R_XTENSA_SLOT6_ALT 41 +#define R_XTENSA_SLOT7_ALT 42 +#define R_XTENSA_SLOT8_ALT 43 +#define R_XTENSA_SLOT9_ALT 44 +#define R_XTENSA_SLOT10_ALT 45 +#define R_XTENSA_SLOT11_ALT 46 +#define R_XTENSA_SLOT12_ALT 47 +#define R_XTENSA_SLOT13_ALT 48 +#define R_XTENSA_SLOT14_ALT 49 + /* ELF register definitions. This is needed for core dump support. */ /* -- cgit v1.2.3-70-g09d2 From 6656920b0b50beacb6cb64cf55273cbb686e436e Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Wed, 22 Aug 2007 10:14:51 -0700 Subject: [XTENSA] Add support for cache-aliasing Add support for processors that have cache-aliasing issues, such as the Stretch S5000 processor. Cache-aliasing means that the size of the cache (for one way) is larger than the page size, thus, a page can end up in several places in cache depending on the virtual to physical translation. The method used here is to map a user page temporarily through the auto-refill way 0 and of of the DTLB. We probably will want to revisit this issue and use a better approach with kmap/kunmap. Signed-off-by: Chris Zankel --- arch/xtensa/kernel/asm-offsets.c | 13 +- arch/xtensa/kernel/entry.S | 75 +++++++++- arch/xtensa/mm/Makefile | 6 +- arch/xtensa/mm/cache.c | 256 ++++++++++++++++++++++++++++++++ arch/xtensa/mm/fault.c | 6 +- arch/xtensa/mm/init.c | 252 ++------------------------------ arch/xtensa/mm/misc.S | 306 ++++++++++++++++++++++++++++++++++----- include/asm-xtensa/cache.h | 9 ++ include/asm-xtensa/cacheflush.h | 81 +++++++---- include/asm-xtensa/io.h | 1 + include/asm-xtensa/page.h | 56 ++++++- include/asm-xtensa/pgalloc.h | 107 ++++---------- include/asm-xtensa/pgtable.h | 32 ++-- include/asm-xtensa/tlb.h | 30 +++- 14 files changed, 816 insertions(+), 414 deletions(-) create mode 100644 arch/xtensa/mm/cache.c diff --git a/arch/xtensa/kernel/asm-offsets.c b/arch/xtensa/kernel/asm-offsets.c index d0323cd6a2e..d5ffe7b6443 100644 --- a/arch/xtensa/kernel/asm-offsets.c +++ b/arch/xtensa/kernel/asm-offsets.c @@ -18,12 +18,13 @@ #include #include #include +#include + #include #include #include #define DEFINE(sym, val) asm volatile("\n->" #sym " %0 " #val : : "i" (val)) -#define BLANK() asm volatile("\n->" : : ) int main(void) { @@ -63,7 +64,6 @@ int main(void) DEFINE(PT_SIZE, sizeof(struct pt_regs)); DEFINE(PT_AREG_END, offsetof (struct pt_regs, areg[XCHAL_NUM_AREGS])); DEFINE(PT_USER_SIZE, offsetof(struct pt_regs, areg[XCHAL_NUM_AREGS])); - BLANK(); /* struct task_struct */ DEFINE(TASK_PTRACE, offsetof (struct task_struct, ptrace)); @@ -73,27 +73,26 @@ int main(void) DEFINE(TASK_THREAD, offsetof (struct task_struct, thread)); DEFINE(TASK_THREAD_INFO, offsetof (struct task_struct, stack)); DEFINE(TASK_STRUCT_SIZE, sizeof (struct task_struct)); - BLANK(); /* struct thread_info (offset from start_struct) */ DEFINE(THREAD_RA, offsetof (struct task_struct, thread.ra)); DEFINE(THREAD_SP, offsetof (struct task_struct, thread.sp)); DEFINE(THREAD_CP_SAVE, offsetof (struct task_struct, thread.cp_save)); DEFINE(THREAD_CURRENT_DS, offsetof (struct task_struct, thread.current_ds)); - BLANK(); /* struct mm_struct */ DEFINE(MM_USERS, offsetof(struct mm_struct, mm_users)); DEFINE(MM_PGD, offsetof (struct mm_struct, pgd)); DEFINE(MM_CONTEXT, offsetof (struct mm_struct, context)); - BLANK(); - DEFINE(PT_SINGLESTEP_BIT, PT_SINGLESTEP_BIT); + + /* struct page */ + DEFINE(PAGE_FLAGS, offsetof(struct page, flags)); /* constants */ DEFINE(_CLONE_VM, CLONE_VM); DEFINE(_CLONE_UNTRACED, CLONE_UNTRACED); + DEFINE(PG_ARCH_1, PG_arch_1); return 0; } - diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 65741e3368e..91a689eca43 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -7,7 +7,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2004-2005 by Tensilica Inc. + * Copyright (C) 2004-2007 by Tensilica Inc. * * Chris Zankel * @@ -169,7 +169,7 @@ _user_exception: * We have to save all registers up to the first '1' from * the right, except the current frame (bit 0). * Assume a2 is: 001001000110001 - * All regiser frames starting from the top fiel to the marked '1' + * All register frames starting from the top field to the marked '1' * must be saved. */ @@ -1590,7 +1590,7 @@ ENTRY(fast_second_level_miss) * The messy computation for 'pteval' above really simplifies * into the following: * - * pteval = ((pmdval - PAGE_OFFSET) & PAGE_MASK) | PAGE_KERNEL + * pteval = ((pmdval - PAGE_OFFSET) & PAGE_MASK) | PAGE_DIRECTORY */ movi a1, -PAGE_OFFSET @@ -1602,7 +1602,7 @@ ENTRY(fast_second_level_miss) or a0, a0, a1 # ... | PAGE_DIRECTORY /* - * We utilize all three wired-ways (7-9( to hold pmd translations. + * We utilize all three wired-ways (7-9) to hold pmd translations. * Memory regions are mapped to the DTLBs according to bits 28 and 29. * This allows to map the three most common regions to three different * DTLBs: @@ -1652,6 +1652,73 @@ ENTRY(fast_second_level_miss) 9: l32i a0, a1, TASK_ACTIVE_MM # unlikely case mm == 0 j 8b +#if (DCACHE_WAY_SIZE > PAGE_SIZE) + +2: /* Special case for cache aliasing. + * We (should) only get here if a clear_user_page, copy_user_page + * or the aliased cache flush functions got preemptively interrupted + * by another task. Re-establish temporary mapping to the + * TLBTEMP_BASE areas. + */ + + /* We shouldn't be in a double exception */ + + l32i a0, a2, PT_DEPC + bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 2f + + /* Make sure the exception originated in the special functions */ + + movi a0, __tlbtemp_mapping_start + rsr a3, EPC_1 + bltu a3, a0, 2f + movi a0, __tlbtemp_mapping_end + bgeu a3, a0, 2f + + /* Check if excvaddr was in one of the TLBTEMP_BASE areas. */ + + movi a3, TLBTEMP_BASE_1 + rsr a0, EXCVADDR + bltu a0, a3, 2f + + addi a1, a0, -(2 << (DCACHE_ALIAS_ORDER + PAGE_SHIFT)) + bgeu a1, a3, 2f + + /* Check if we have to restore an ITLB mapping. */ + + movi a1, __tlbtemp_mapping_itlb + rsr a3, EPC_1 + sub a3, a3, a1 + + /* Calculate VPN */ + + movi a1, PAGE_MASK + and a1, a1, a0 + + /* Jump for ITLB entry */ + + bgez a3, 1f + + /* We can use up to two TLBTEMP areas, one for src and one for dst. */ + + extui a3, a0, PAGE_SHIFT + DCACHE_ALIAS_ORDER, 1 + add a1, a3, a1 + + /* PPN is in a6 for the first TLBTEMP area and in a7 for the second. */ + + mov a0, a6 + movnez a0, a7, a3 + j 3b + + /* ITLB entry. We only use dst in a6. */ + +1: witlb a6, a1 + isync + j 4b + + +#endif // DCACHE_WAY_SIZE > PAGE_SIZE + + 2: /* Invalid PGD, default exception handling */ movi a3, exc_table diff --git a/arch/xtensa/mm/Makefile b/arch/xtensa/mm/Makefile index a5aed5932d7..10aec22a8f9 100644 --- a/arch/xtensa/mm/Makefile +++ b/arch/xtensa/mm/Makefile @@ -5,9 +5,5 @@ # removes any old dependencies. DON'T put your own dependencies here # unless it's something special (ie not a .c file). # -# Note 2! The CFLAGS definition is now in the main makefile... -obj-y := init.o fault.o tlb.o misc.o -obj-m := -obj-n := -obj- := +obj-y := init.o fault.o tlb.o misc.o cache.o diff --git a/arch/xtensa/mm/cache.c b/arch/xtensa/mm/cache.c new file mode 100644 index 00000000000..9a1fa9478ae --- /dev/null +++ b/arch/xtensa/mm/cache.c @@ -0,0 +1,256 @@ +/* + * arch/xtensa/mm/cache.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001-2006 Tensilica Inc. + * + * Chris Zankel + * Joe Taylor + * Marc Gauthier + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +//#define printd(x...) printk(x) +#define printd(x...) do { } while(0) + +/* + * Note: + * The kernel provides one architecture bit PG_arch_1 in the page flags that + * can be used for cache coherency. + * + * I$-D$ coherency. + * + * The Xtensa architecture doesn't keep the instruction cache coherent with + * the data cache. We use the architecture bit to indicate if the caches + * are coherent. The kernel clears this bit whenever a page is added to the + * page cache. At that time, the caches might not be in sync. We, therefore, + * define this flag as 'clean' if set. + * + * D-cache aliasing. + * + * With cache aliasing, we have to always flush the cache when pages are + * unmapped (see tlb_start_vma(). So, we use this flag to indicate a dirty + * page. + * + * + * + */ + +#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK + +/* + * Any time the kernel writes to a user page cache page, or it is about to + * read from a page cache page this routine is called. + * + */ + +void flush_dcache_page(struct page *page) +{ + struct address_space *mapping = page_mapping(page); + + /* + * If we have a mapping but the page is not mapped to user-space + * yet, we simply mark this page dirty and defer flushing the + * caches until update_mmu(). + */ + + if (mapping && !mapping_mapped(mapping)) { + if (!test_bit(PG_arch_1, &page->flags)) + set_bit(PG_arch_1, &page->flags); + return; + + } else { + + unsigned long phys = page_to_phys(page); + unsigned long temp = page->index << PAGE_SHIFT; + unsigned long alias = !(DCACHE_ALIAS_EQ(temp, phys)); + unsigned long virt; + + /* + * Flush the page in kernel space and user space. + * Note that we can omit that step if aliasing is not + * an issue, but we do have to synchronize I$ and D$ + * if we have a mapping. + */ + + if (!alias && !mapping) + return; + + __flush_invalidate_dcache_page((long)page_address(page)); + + virt = TLBTEMP_BASE_1 + (temp & DCACHE_ALIAS_MASK); + + if (alias) + __flush_invalidate_dcache_page_alias(virt, phys); + + if (mapping) + __invalidate_icache_page_alias(virt, phys); + } + + /* There shouldn't be an entry in the cache for this page anymore. */ +} + + +/* + * For now, flush the whole cache. FIXME?? + */ + +void flush_cache_range(struct vm_area_struct* vma, + unsigned long start, unsigned long end) +{ + __flush_invalidate_dcache_all(); + __invalidate_icache_all(); +} + +/* + * Remove any entry in the cache for this page. + * + * Note that this function is only called for user pages, so use the + * alias versions of the cache flush functions. + */ + +void flush_cache_page(struct vm_area_struct* vma, unsigned long address, + unsigned long pfn) +{ + /* Note that we have to use the 'alias' address to avoid multi-hit */ + + unsigned long phys = page_to_phys(pfn_to_page(pfn)); + unsigned long virt = TLBTEMP_BASE_1 + (address & DCACHE_ALIAS_MASK); + + __flush_invalidate_dcache_page_alias(virt, phys); + __invalidate_icache_page_alias(virt, phys); +} + +#endif + +void +update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t pte) +{ + unsigned long pfn = pte_pfn(pte); + struct page *page; + + if (!pfn_valid(pfn)) + return; + + page = pfn_to_page(pfn); + + /* Invalidate old entry in TLBs */ + + invalidate_itlb_mapping(addr); + invalidate_dtlb_mapping(addr); + +#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK + + if (!PageReserved(page) && test_bit(PG_arch_1, &page->flags)) { + + unsigned long vaddr = TLBTEMP_BASE_1 + (addr & DCACHE_ALIAS_MASK); + unsigned long paddr = (unsigned long) page_address(page); + unsigned long phys = page_to_phys(page); + + __flush_invalidate_dcache_page(paddr); + + __flush_invalidate_dcache_page_alias(vaddr, phys); + __invalidate_icache_page_alias(vaddr, phys); + + clear_bit(PG_arch_1, &page->flags); + } +#else + if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags) + && (vma->vm_flags & VM_EXEC) != 0) { + unsigned long vaddr = addr & PAGE_MASK; + __flush_dcache_page(vaddr); + __invalidate_icache_page(vaddr); + set_bit(PG_arch_1, &page->flags); + } +#endif +} + +/* + * access_process_vm() has called get_user_pages(), which has done a + * flush_dcache_page() on the page. + */ + +#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK + +void copy_to_user_page(struct vm_area_struct *vma, struct page *page, + unsigned long vaddr, void *dst, const void *src, + unsigned long len) +{ + unsigned long phys = page_to_phys(page); + unsigned long alias = !(DCACHE_ALIAS_EQ(vaddr, phys)); + + /* Flush and invalidate user page if aliased. */ + + if (alias) { + unsigned long temp = TLBTEMP_BASE_1 + (vaddr & DCACHE_ALIAS_MASK); + __flush_invalidate_dcache_page_alias(temp, phys); + } + + /* Copy data */ + + memcpy(dst, src, len); + + /* + * Flush and invalidate kernel page if aliased and synchronize + * data and instruction caches for executable pages. + */ + + if (alias) { + unsigned long temp = TLBTEMP_BASE_1 + (vaddr & DCACHE_ALIAS_MASK); + + __flush_invalidate_dcache_range((unsigned long) dst, len); + if ((vma->vm_flags & VM_EXEC) != 0) { + __invalidate_icache_page_alias(temp, phys); + } + + } else if ((vma->vm_flags & VM_EXEC) != 0) { + __flush_dcache_range((unsigned long)dst,len); + __invalidate_icache_range((unsigned long) dst, len); + } +} + +extern void copy_from_user_page(struct vm_area_struct *vma, struct page *page, + unsigned long vaddr, void *dst, const void *src, + unsigned long len) +{ + unsigned long phys = page_to_phys(page); + unsigned long alias = !(DCACHE_ALIAS_EQ(vaddr, phys)); + + /* + * Flush user page if aliased. + * (Note: a simply flush would be sufficient) + */ + + if (alias) { + unsigned long temp = TLBTEMP_BASE_1 + (vaddr & DCACHE_ALIAS_MASK); + __flush_invalidate_dcache_page_alias(temp, phys); + } + + memcpy(dst, src, len); +} + +#endif diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c index 16004067add..45d28f217c0 100644 --- a/arch/xtensa/mm/fault.c +++ b/arch/xtensa/mm/fault.c @@ -24,6 +24,8 @@ unsigned long asid_cache = ASID_USER_FIRST; void bad_page_fault(struct pt_regs*, unsigned long, int); +#undef DEBUG_PAGE_FAULT + /* * This routine handles page faults. It determines the address, * and the problem, and then passes it off to one of the appropriate @@ -64,7 +66,7 @@ void do_page_fault(struct pt_regs *regs) exccause == EXCCAUSE_ITLB_MISS || exccause == EXCCAUSE_FETCH_CACHE_ATTRIBUTE) ? 1 : 0; -#if 0 +#ifdef DEBUG_PAGE_FAULT printk("[%s:%d:%08x:%d:%08x:%s%s]\n", current->comm, current->pid, address, exccause, regs->pc, is_write? "w":"", is_exec? "x":""); #endif @@ -219,7 +221,7 @@ bad_page_fault(struct pt_regs *regs, unsigned long address, int sig) /* Are we prepared to handle this kernel fault? */ if ((entry = search_exception_tables(regs->pc)) != NULL) { -#if 1 +#ifdef DEBUG_PAGE_FAULT printk(KERN_DEBUG "%s: Exception at pc=%#010lx (%lx)\n", current->comm, regs->pc, entry->fixup); #endif diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c index 8415c76f11c..b3086f34a8e 100644 --- a/arch/xtensa/mm/init.c +++ b/arch/xtensa/mm/init.c @@ -15,40 +15,24 @@ * Kevin Chea */ -#include -#include -#include #include #include -#include -#include -#include #include #include +#include +#include +#include +#include #include #include #include #include -#include #include #include -#include - -#define DEBUG 0 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); -//static DEFINE_SPINLOCK(tlb_lock); - -/* - * This flag is used to indicate that the page was mapped and modified in - * kernel space, so the cache is probably dirty at that address. - * If cache aliasing is enabled and the page color mismatches, update_mmu_cache - * synchronizes the caches if this bit is set. - */ - -#define PG_cache_clean PG_arch_1 /* References to section boundaries */ @@ -323,228 +307,22 @@ void show_mem(void) printk("%d free pages\n", free); } -/* ------------------------------------------------------------------------- */ - -#if (DCACHE_WAY_SIZE > PAGE_SIZE) - -/* - * With cache aliasing, the page color of the page in kernel space and user - * space might mismatch. We temporarily map the page to a different virtual - * address with the same color and clear the page there. - */ - -void clear_user_page(void *kaddr, unsigned long vaddr, struct page* page) -{ - - /* There shouldn't be any entries for this page. */ - - __flush_invalidate_dcache_page_phys(__pa(page_address(page))); - - if (!PAGE_COLOR_EQ(vaddr, kaddr)) { - unsigned long v, p; - - /* Temporarily map page to DTLB_WAY_DCACHE_ALIAS0. */ - - spin_lock(&tlb_lock); - - p = (unsigned long)pte_val((mk_pte(page,PAGE_KERNEL))); - kaddr = (void*)PAGE_COLOR_MAP0(vaddr); - v = (unsigned long)kaddr | DTLB_WAY_DCACHE_ALIAS0; - __asm__ __volatile__("wdtlb %0,%1; dsync" : :"a" (p), "a" (v)); - - clear_page(kaddr); - - spin_unlock(&tlb_lock); - } else { - clear_page(kaddr); - } - - /* We need to make sure that i$ and d$ are coherent. */ - - clear_bit(PG_cache_clean, &page->flags); -} - -/* - * With cache aliasing, we have to make sure that the page color of the page - * in kernel space matches that of the virtual user address before we read - * the page. If the page color differ, we create a temporary DTLB entry with - * the corrent page color and use this 'temporary' address as the source. - * We then use the same approach as in clear_user_page and copy the data - * to the kernel space and clear the PG_cache_clean bit to synchronize caches - * later. - * - * Note: - * Instead of using another 'way' for the temporary DTLB entry, we could - * probably use the same entry that points to the kernel address (after - * saving the original value and restoring it when we are done). - */ +struct kmem_cache *pgtable_cache __read_mostly; -void copy_user_page(void* to, void* from, unsigned long vaddr, - struct page* to_page) +static void pgd_ctor(void *addr, struct kmem_cache *cache, unsigned long flags) { - /* There shouldn't be any entries for the new page. */ - - __flush_invalidate_dcache_page_phys(__pa(page_address(to_page))); - - spin_lock(&tlb_lock); - - if (!PAGE_COLOR_EQ(vaddr, from)) { - unsigned long v, p, t; - - __asm__ __volatile__ ("pdtlb %1,%2; rdtlb1 %0,%1" - : "=a"(p), "=a"(t) : "a"(from)); - from = (void*)PAGE_COLOR_MAP0(vaddr); - v = (unsigned long)from | DTLB_WAY_DCACHE_ALIAS0; - __asm__ __volatile__ ("wdtlb %0,%1; dsync" ::"a" (p), "a" (v)); - } - - if (!PAGE_COLOR_EQ(vaddr, to)) { - unsigned long v, p; - - p = (unsigned long)pte_val((mk_pte(to_page,PAGE_KERNEL))); - to = (void*)PAGE_COLOR_MAP1(vaddr); - v = (unsigned long)to | DTLB_WAY_DCACHE_ALIAS1; - __asm__ __volatile__ ("wdtlb %0,%1; dsync" ::"a" (p), "a" (v)); - } - copy_page(to, from); - - spin_unlock(&tlb_lock); - - /* We need to make sure that i$ and d$ are coherent. */ - - clear_bit(PG_cache_clean, &to_page->flags); -} - - - -/* - * Any time the kernel writes to a user page cache page, or it is about to - * read from a page cache page this routine is called. - * - * Note: - * The kernel currently only provides one architecture bit in the page - * flags that we use for I$/D$ coherency. Maybe, in future, we can - * use a sepearte bit for deferred dcache aliasing: - * If the page is not mapped yet, we only need to set a flag, - * if mapped, we need to invalidate the page. - */ -// FIXME: we probably need this for WB caches not only for Page Coloring.. - -void flush_dcache_page(struct page *page) -{ - unsigned long addr = __pa(page_address(page)); - struct address_space *mapping = page_mapping(page); - - __flush_invalidate_dcache_page_phys(addr); - - if (!test_bit(PG_cache_clean, &page->flags)) - return; - - /* If this page hasn't been mapped, yet, handle I$/D$ coherency later.*/ -#if 0 - if (mapping && !mapping_mapped(mapping)) - clear_bit(PG_cache_clean, &page->flags); - else -#endif - __invalidate_icache_page_phys(addr); -} - -void flush_cache_range(struct vm_area_struct* vma, unsigned long s, - unsigned long e) -{ - __flush_invalidate_cache_all(); -} - -void flush_cache_page(struct vm_area_struct* vma, unsigned long address, - unsigned long pfn) -{ - struct page *page = pfn_to_page(pfn); - - /* Remove any entry for the old mapping. */ - - if (current->active_mm == vma->vm_mm) { - unsigned long addr = __pa(page_address(page)); - __flush_invalidate_dcache_page_phys(addr); - if ((vma->vm_flags & VM_EXEC) != 0) - __invalidate_icache_page_phys(addr); - } else { - BUG(); - } -} - -#endif /* (DCACHE_WAY_SIZE > PAGE_SIZE) */ - - -pte_t* pte_alloc_one_kernel (struct mm_struct* mm, unsigned long addr) -{ - pte_t* pte = (pte_t*)__get_free_pages(GFP_KERNEL|__GFP_REPEAT, 0); - if (likely(pte)) { - pte_t* ptep = (pte_t*)(pte_val(*pte) + PAGE_OFFSET); - int i; - for (i = 0; i < 1024; i++, ptep++) - pte_clear(mm, addr, ptep); - } - return pte; -} - -struct page* pte_alloc_one(struct mm_struct *mm, unsigned long addr) -{ - struct page *page; - - page = alloc_pages(GFP_KERNEL | __GFP_REPEAT, 0); - - if (likely(page)) { - pte_t* ptep = kmap_atomic(page, KM_USER0); - int i; + pte_t* ptep = (pte_t*)addr; + int i; - for (i = 0; i < 1024; i++, ptep++) - pte_clear(mm, addr, ptep); + for (i = 0; i < 1024; i++, ptep++) + pte_clear(NULL, 0, ptep); - kunmap_atomic(ptep, KM_USER0); - } - return page; } - -/* - * Handle D$/I$ coherency. - * - * Note: - * We only have one architecture bit for the page flags, so we cannot handle - * cache aliasing, yet. - */ - -void -update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t pte) +void __init pgtable_cache_init(void) { - unsigned long pfn = pte_pfn(pte); - struct page *page; - unsigned long vaddr = addr & PAGE_MASK; - - if (!pfn_valid(pfn)) - return; - - page = pfn_to_page(pfn); - - invalidate_itlb_mapping(addr); - invalidate_dtlb_mapping(addr); - - /* We have a new mapping. Use it. */ - - write_dtlb_entry(pte, dtlb_probe(addr)); - - /* If the processor can execute from this page, synchronize D$/I$. */ - - if ((vma->vm_flags & VM_EXEC) != 0) { - - write_itlb_entry(pte, itlb_probe(addr)); - - /* Synchronize caches, if not clean. */ - - if (!test_and_set_bit(PG_cache_clean, &page->flags)) { - __flush_dcache_page(vaddr); - __invalidate_icache_page(vaddr); - } - } + pgtable_cache = kmem_cache_create("pgd", + PAGE_SIZE, PAGE_SIZE, + SLAB_HWCACHE_ALIGN, + pgd_ctor); } - diff --git a/arch/xtensa/mm/misc.S b/arch/xtensa/mm/misc.S index ae085332c60..e1f880368e3 100644 --- a/arch/xtensa/mm/misc.S +++ b/arch/xtensa/mm/misc.S @@ -7,29 +7,33 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2007 Tensilica Inc. * * Chris Zankel */ -/* Note: we might want to implement some of the loops as zero-overhead-loops, - * where applicable and if supported by the processor. - */ #include #include #include #include #include +#include + -/* clear_page (page) */ +/* + * clear_page and clear_user_page are the same for non-cache-aliased configs. + * + * clear_page (unsigned long page) + * a2 + */ ENTRY(clear_page) entry a1, 16 - addi a4, a2, PAGE_SIZE - movi a3, 0 -1: s32i a3, a2, 0 + movi a3, 0 + __loopi a2, a7, PAGE_SIZE, 32 + s32i a3, a2, 0 s32i a3, a2, 4 s32i a3, a2, 8 s32i a3, a2, 12 @@ -37,42 +41,277 @@ ENTRY(clear_page) s32i a3, a2, 20 s32i a3, a2, 24 s32i a3, a2, 28 - addi a2, a2, 32 - blt a2, a4, 1b + __endla a2, a7, 32 retw /* + * copy_page and copy_user_page are the same for non-cache-aliased configs. + * * copy_page (void *to, void *from) - * a2 a3 + * a2 a3 */ ENTRY(copy_page) entry a1, 16 - addi a4, a2, PAGE_SIZE - -1: l32i a5, a3, 0 - l32i a6, a3, 4 - l32i a7, a3, 8 - s32i a5, a2, 0 - s32i a6, a2, 4 - s32i a7, a2, 8 - l32i a5, a3, 12 - l32i a6, a3, 16 - l32i a7, a3, 20 - s32i a5, a2, 12 - s32i a6, a2, 16 - s32i a7, a2, 20 - l32i a5, a3, 24 - l32i a6, a3, 28 - s32i a5, a2, 24 - s32i a6, a2, 28 - addi a2, a2, 32 - addi a3, a3, 32 - blt a2, a4, 1b + __loopi a2, a4, PAGE_SIZE, 32 + + l32i a8, a3, 0 + l32i a9, a3, 4 + s32i a8, a2, 0 + s32i a9, a2, 4 + + l32i a8, a3, 8 + l32i a9, a3, 12 + s32i a8, a2, 8 + s32i a9, a2, 12 + + l32i a8, a3, 16 + l32i a9, a3, 20 + s32i a8, a2, 16 + s32i a9, a2, 20 + + l32i a8, a3, 24 + l32i a9, a3, 28 + s32i a8, a2, 24 + s32i a9, a2, 28 + + addi a2, a2, 32 + addi a3, a3, 32 + + __endl a2, a4 + + retw + +/* + * If we have to deal with cache aliasing, we use temporary memory mappings + * to ensure that the source and destination pages have the same color as + * the virtual address. We use way 0 and 1 for temporary mappings in such cases. + * + * The temporary DTLB entries shouldn't be flushed by interrupts, but are + * flushed by preemptive task switches. Special code in the + * fast_second_level_miss handler re-established the temporary mapping. + * It requires that the PPNs for the destination and source addresses are + * in a6, and a7, respectively. + */ + +/* TLB miss exceptions are treated special in the following region */ + +ENTRY(__tlbtemp_mapping_start) + +#if (DCACHE_WAY_SIZE > PAGE_SIZE) + +/* + * clear_user_page (void *addr, unsigned long vaddr, struct page *page) + * a2 a3 a4 + */ + +ENTRY(clear_user_page) + entry a1, 32 + + /* Mark page dirty and determine alias. */ + + movi a7, (1 << PG_ARCH_1) + l32i a5, a4, PAGE_FLAGS + xor a6, a2, a3 + extui a3, a3, PAGE_SHIFT, DCACHE_ALIAS_ORDER + extui a6, a6, PAGE_SHIFT, DCACHE_ALIAS_ORDER + or a5, a5, a7 + slli a3, a3, PAGE_SHIFT + s32i a5, a4, PAGE_FLAGS + + /* Skip setting up a temporary DTLB if not aliased. */ + + beqz a6, 1f + + /* Invalidate kernel page. */ + + mov a10, a2 + call8 __invalidate_dcache_page + + /* Setup a temporary DTLB with the color of the VPN */ + + movi a4, -PAGE_OFFSET + (PAGE_KERNEL | _PAGE_HW_WRITE) + movi a5, TLBTEMP_BASE_1 # virt + add a6, a2, a4 # ppn + add a2, a5, a3 # add 'color' + + wdtlb a6, a2 + dsync + +1: movi a3, 0 + __loopi a2, a7, PAGE_SIZE, 32 + s32i a3, a2, 0 + s32i a3, a2, 4 + s32i a3, a2, 8 + s32i a3, a2, 12 + s32i a3, a2, 16 + s32i a3, a2, 20 + s32i a3, a2, 24 + s32i a3, a2, 28 + __endla a2, a7, 32 + + bnez a6, 1f + retw + + /* We need to invalidate the temporary idtlb entry, if any. */ + +1: addi a2, a2, -PAGE_SIZE + idtlb a2 + dsync + + retw + +/* + * copy_page_user (void *to, void *from, unsigned long vaddr, struct page *page) + * a2 a3 a4 a5 + */ + +ENTRY(copy_user_page) + + entry a1, 32 + + /* Mark page dirty and determine alias for destination. */ + + movi a8, (1 << PG_ARCH_1) + l32i a9, a5, PAGE_FLAGS + xor a6, a2, a4 + xor a7, a3, a4 + extui a4, a4, PAGE_SHIFT, DCACHE_ALIAS_ORDER + extui a6, a6, PAGE_SHIFT, DCACHE_ALIAS_ORDER + extui a7, a7, PAGE_SHIFT, DCACHE_ALIAS_ORDER + or a9, a9, a8 + slli a4, a4, PAGE_SHIFT + s32i a9, a5, PAGE_FLAGS + movi a5, -PAGE_OFFSET + (PAGE_KERNEL | _PAGE_HW_WRITE) + + beqz a6, 1f + + /* Invalidate dcache */ + + mov a10, a2 + call8 __invalidate_dcache_page + + /* Setup a temporary DTLB with a matching color. */ + + movi a8, TLBTEMP_BASE_1 # base + add a6, a2, a5 # ppn + add a2, a8, a4 # add 'color' + + wdtlb a6, a2 + dsync + + /* Skip setting up a temporary DTLB for destination if not aliased. */ + +1: beqz a7, 1f + + /* Setup a temporary DTLB with a matching color. */ + + movi a8, TLBTEMP_BASE_2 # base + add a7, a3, a5 # ppn + add a3, a8, a4 + addi a8, a3, 1 # way1 + + wdtlb a7, a8 + dsync + +1: __loopi a2, a4, PAGE_SIZE, 32 + + l32i a8, a3, 0 + l32i a9, a3, 4 + s32i a8, a2, 0 + s32i a9, a2, 4 + + l32i a8, a3, 8 + l32i a9, a3, 12 + s32i a8, a2, 8 + s32i a9, a2, 12 + + l32i a8, a3, 16 + l32i a9, a3, 20 + s32i a8, a2, 16 + s32i a9, a2, 20 + + l32i a8, a3, 24 + l32i a9, a3, 28 + s32i a8, a2, 24 + s32i a9, a2, 28 + + addi a2, a2, 32 + addi a3, a3, 32 + + __endl a2, a4 + + /* We need to invalidate any temporary mapping! */ + + bnez a6, 1f + bnez a7, 2f + retw + +1: addi a2, a2, -PAGE_SIZE + idtlb a2 + dsync + bnez a7, 2f + retw + +2: addi a3, a3, -PAGE_SIZE+1 + idtlb a3 + dsync + + retw + +#endif + +#if (DCACHE_WAY_SIZE > PAGE_SIZE) + +/* + * void __flush_invalidate_dcache_page_alias (addr, phys) + * a2 a3 + */ + +ENTRY(__flush_invalidate_dcache_page_alias) + entry sp, 16 + + movi a7, 0 # required for exception handler + addi a6, a3, (PAGE_KERNEL | _PAGE_HW_WRITE) + mov a4, a2 + wdtlb a6, a2 + dsync + + ___flush_invalidate_dcache_page a2 a3 + + idtlb a4 + dsync + + retw + +#endif + +ENTRY(__tlbtemp_mapping_itlb) + +#if (ICACHE_WAY_SIZE > PAGE_SIZE) + +ENTRY(__invalidate_icache_page_alias) + entry sp, 16 + + addi a6, a3, (PAGE_KERNEL | _PAGE_HW_WRITE) + mov a4, a2 + witlb a6, a2 + isync + + ___invalidate_icache_page a2 a3 + + iitlb a4 + isync retw +#endif + +/* End of special treatment in tlb miss exception */ + +ENTRY(__tlbtemp_mapping_end) + /* * void __invalidate_icache_page(ulong start) */ @@ -121,8 +360,6 @@ ENTRY(__flush_dcache_page) dsync retw - - /* * void __invalidate_icache_range(ulong start, ulong size) */ @@ -168,7 +405,6 @@ ENTRY(__invalidate_dcache_range) ___invalidate_dcache_range a2 a3 a4 - retw /* diff --git a/include/asm-xtensa/cache.h b/include/asm-xtensa/cache.h index 1c4a78f29ae..3bba2a540cf 100644 --- a/include/asm-xtensa/cache.h +++ b/include/asm-xtensa/cache.h @@ -19,6 +19,15 @@ #define DCACHE_WAY_SIZE (XCHAL_DCACHE_SIZE/XCHAL_DCACHE_WAYS) #define ICACHE_WAY_SIZE (XCHAL_ICACHE_SIZE/XCHAL_ICACHE_WAYS) +#define DCACHE_WAY_SHIFT (XCHAL_DCACHE_SETWIDTH + XCHAL_DCACHE_LINEWIDTH) +#define ICACHE_WAY_SHIFT (XCHAL_ICACHE_SETWIDTH + XCHAL_ICACHE_LINEWIDTH) + +/* Maximum cache size per way. */ +#if DCACHE_WAY_SIZE >= ICACHE_WAY_SIZE +# define CACHE_WAY_SIZE DCACHE_WAY_SIZE +#else +# define CACHE_WAY_SIZE ICACHE_WAY_SIZE +#endif #endif /* _XTENSA_CACHE_H */ diff --git a/include/asm-xtensa/cacheflush.h b/include/asm-xtensa/cacheflush.h index 22ef901b784..b773c57e75a 100644 --- a/include/asm-xtensa/cacheflush.h +++ b/include/asm-xtensa/cacheflush.h @@ -5,7 +5,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * (C) 2001 - 2006 Tensilica Inc. + * (C) 2001 - 2007 Tensilica Inc. */ #ifndef _XTENSA_CACHEFLUSH_H @@ -18,10 +18,7 @@ #include /* - * flush and invalidate data cache, invalidate instruction cache: - * - * __flush_invalidate_cache_all() - * __flush_invalidate_cache_range(from,sze) + * Lo-level routines for cache flushing. * * invalidate data or instruction cache: * @@ -40,26 +37,39 @@ * __flush_invalidate_dcache_all() * __flush_invalidate_dcache_page(adr) * __flush_invalidate_dcache_range(from,size) + * + * specials for cache aliasing: + * + * __flush_invalidate_dcache_page_alias(vaddr,paddr) + * __invalidate_icache_page_alias(vaddr,paddr) */ -extern void __flush_invalidate_cache_all(void); -extern void __flush_invalidate_cache_range(unsigned long, unsigned long); -extern void __flush_invalidate_dcache_all(void); +extern void __invalidate_dcache_all(void); extern void __invalidate_icache_all(void); - extern void __invalidate_dcache_page(unsigned long); extern void __invalidate_icache_page(unsigned long); extern void __invalidate_icache_range(unsigned long, unsigned long); extern void __invalidate_dcache_range(unsigned long, unsigned long); + #if XCHAL_DCACHE_IS_WRITEBACK +extern void __flush_invalidate_dcache_all(void); extern void __flush_dcache_page(unsigned long); +extern void __flush_dcache_range(unsigned long, unsigned long); extern void __flush_invalidate_dcache_page(unsigned long); extern void __flush_invalidate_dcache_range(unsigned long, unsigned long); #else -# define __flush_dcache_page(p) do { } while(0) -# define __flush_invalidate_dcache_page(p) do { } while(0) -# define __flush_invalidate_dcache_range(p,s) do { } while(0) +# define __flush_dcache_range(p,s) do { } while(0) +# define __flush_dcache_page(p) do { } while(0) +# define __flush_invalidate_dcache_page(p) __invalidate_dcache_page(p) +# define __flush_invalidate_dcache_range(p,s) __invalidate_dcache_range(p,s) +#endif + +#if (DCACHE_WAY_SIZE > PAGE_SIZE) +extern void __flush_invalidate_dcache_page_alias(unsigned long, unsigned long); +#endif +#if (ICACHE_WAY_SIZE > PAGE_SIZE) +extern void __invalidate_icache_page_alias(unsigned long, unsigned long); #endif /* @@ -71,17 +81,21 @@ extern void __flush_invalidate_dcache_range(unsigned long, unsigned long); * (see also Documentation/cachetlb.txt) */ -#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK +#if (DCACHE_WAY_SIZE > PAGE_SIZE) -#define flush_cache_all() __flush_invalidate_cache_all(); -#define flush_cache_mm(mm) __flush_invalidate_cache_all(); -#define flush_cache_dup_mm(mm) __flush_invalidate_cache_all(); +#define flush_cache_all() \ + do { \ + __flush_invalidate_dcache_all(); \ + __invalidate_icache_all(); \ + } while (0) -#define flush_cache_vmap(start,end) __flush_invalidate_cache_all(); -#define flush_cache_vunmap(start,end) __flush_invalidate_cache_all(); +#define flush_cache_mm(mm) flush_cache_all() +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) -extern void flush_dcache_page(struct page*); +#define flush_cache_vmap(start,end) flush_cache_all() +#define flush_cache_vunmap(start,end) flush_cache_all() +extern void flush_dcache_page(struct page*); extern void flush_cache_range(struct vm_area_struct*, ulong, ulong); extern void flush_cache_page(struct vm_area_struct*, unsigned long, unsigned long); @@ -101,24 +115,39 @@ extern void flush_cache_page(struct vm_area_struct*, unsigned long, unsigned lon #endif +/* Ensure consistency between data and instruction cache. */ #define flush_icache_range(start,end) \ - __invalidate_icache_range(start,(end)-(start)) + do { \ + __flush_dcache_range(start, (end) - (start)); \ + __invalidate_icache_range(start,(end) - (start)); \ + } while (0) /* This is not required, see Documentation/cachetlb.txt */ - -#define flush_icache_page(vma,page) do { } while(0) +#define flush_icache_page(vma,page) do { } while (0) #define flush_dcache_mmap_lock(mapping) do { } while (0) #define flush_dcache_mmap_unlock(mapping) do { } while (0) +#if (DCACHE_WAY_SIZE > PAGE_SIZE) -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) +extern void copy_to_user_page(struct vm_area_struct*, struct page*, + unsigned long, void*, const void*, unsigned long); +extern void copy_from_user_page(struct vm_area_struct*, struct page*, + unsigned long, void*, const void*, unsigned long); + +#else + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + memcpy(dst, src, len); \ + __flush_dcache_range((unsigned long) dst, len); \ + __invalidate_icache_range((unsigned long) dst, len); \ + } while (0) #define copy_from_user_page(vma, page, vaddr, dst, src, len) \ memcpy(dst, src, len) -#endif /* __KERNEL__ */ +#endif +#endif /* __KERNEL__ */ #endif /* _XTENSA_CACHEFLUSH_H */ - diff --git a/include/asm-xtensa/io.h b/include/asm-xtensa/io.h index 0faa614d969..47c3616ea9a 100644 --- a/include/asm-xtensa/io.h +++ b/include/asm-xtensa/io.h @@ -14,6 +14,7 @@ #ifdef __KERNEL__ #include #include +#include #include diff --git a/include/asm-xtensa/page.h b/include/asm-xtensa/page.h index 2d6ac21136c..55ce2c9749a 100644 --- a/include/asm-xtensa/page.h +++ b/include/asm-xtensa/page.h @@ -15,6 +15,7 @@ #include #include +#include /* * Fixed TLB translations in the processor. @@ -39,6 +40,53 @@ #define MAX_MEM_PFN XCHAL_KSEG_SIZE #define PGTABLE_START 0x80000000 +/* + * Cache aliasing: + * + * If the cache size for one way is greater than the page size, we have to + * deal with cache aliasing. The cache index is wider than the page size: + * + * | |cache| cache index + * | pfn |off| virtual address + * |xxxx:X|zzz| + * | : | | + * | \ / | | + * |trans.| | + * | / \ | | + * |yyyy:Y|zzz| physical address + * + * When the page number is translated to the physical page address, the lowest + * bit(s) (X) that are part of the cache index are also translated (Y). + * If this translation changes bit(s) (X), the cache index is also afected, + * thus resulting in a different cache line than before. + * The kernel does not provide a mechanism to ensure that the page color + * (represented by this bit) remains the same when allocated or when pages + * are remapped. When user pages are mapped into kernel space, the color of + * the page might also change. + * + * We use the address space VMALLOC_END ... VMALLOC_END + DCACHE_WAY_SIZE * 2 + * to temporarily map a patch so we can match the color. + */ + +#if DCACHE_WAY_SIZE > PAGE_SIZE +# define DCACHE_ALIAS_ORDER (DCACHE_WAY_SHIFT - PAGE_SHIFT) +# define DCACHE_ALIAS_MASK (PAGE_MASK & (DCACHE_WAY_SIZE - 1)) +# define DCACHE_ALIAS(a) (((a) & DCACHE_ALIAS_MASK) >> PAGE_SHIFT) +# define DCACHE_ALIAS_EQ(a,b) ((((a) ^ (b)) & DCACHE_ALIAS_MASK) == 0) +#else +# define DCACHE_ALIAS_ORDER 0 +#endif + +#if ICACHE_WAY_SIZE > PAGE_SIZE +# define ICACHE_ALIAS_ORDER (ICACHE_WAY_SHIFT - PAGE_SHIFT) +# define ICACHE_ALIAS_MASK (PAGE_MASK & (ICACHE_WAY_SIZE - 1)) +# define ICACHE_ALIAS(a) (((a) & ICACHE_ALIAS_MASK) >> PAGE_SHIFT) +# define ICACHE_ALIAS_EQ(a,b) ((((a) ^ (b)) & ICACHE_ALIAS_MASK) == 0) +#else +# define ICACHE_ALIAS_ORDER 0 +#endif + + #ifdef __ASSEMBLY__ #define __pgprot(x) (x) @@ -90,11 +138,11 @@ extern void copy_page(void *to, void *from); * some extra work */ -#if (DCACHE_WAY_SIZE > PAGE_SIZE) -void clear_user_page(void *addr, unsigned long vaddr, struct page* page); -void copy_user_page(void *to,void* from,unsigned long vaddr,struct page* page); +#if DCACHE_WAY_SIZE > PAGE_SIZE +extern void clear_user_page(void*, unsigned long, struct page*); +extern void copy_user_page(void*, void*, unsigned long, struct page*); #else -# define clear_user_page(page,vaddr,pg) clear_page(page) +# define clear_user_page(page, vaddr, pg) clear_page(page) # define copy_user_page(to, from, vaddr, pg) copy_page(to, from) #endif diff --git a/include/asm-xtensa/pgalloc.h b/include/asm-xtensa/pgalloc.h index d56ddf2055e..3e5b5652510 100644 --- a/include/asm-xtensa/pgalloc.h +++ b/include/asm-xtensa/pgalloc.h @@ -1,11 +1,11 @@ /* - * linux/include/asm-xtensa/pgalloc.h + * include/asm-xtensa/pgalloc.h * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Copyright (C) 2001-2005 Tensilica Inc. + * Copyright (C) 2001-2007 Tensilica Inc. */ #ifndef _XTENSA_PGALLOC_H @@ -13,103 +13,54 @@ #ifdef __KERNEL__ -#include #include -#include -#include - - -/* Cache aliasing: - * - * If the cache size for one way is greater than the page size, we have to - * deal with cache aliasing. The cache index is wider than the page size: - * - * |cache | - * |pgnum |page| virtual address - * |xxxxxX|zzzz| - * | | | - * \ / | | - * trans.| | - * / \ | | - * |yyyyyY|zzzz| physical address - * - * When the page number is translated to the physical page address, the lowest - * bit(s) (X) that are also part of the cache index are also translated (Y). - * If this translation changes this bit (X), the cache index is also afected, - * thus resulting in a different cache line than before. - * The kernel does not provide a mechanism to ensure that the page color - * (represented by this bit) remains the same when allocated or when pages - * are remapped. When user pages are mapped into kernel space, the color of - * the page might also change. - * - * We use the address space VMALLOC_END ... VMALLOC_END + DCACHE_WAY_SIZE * 2 - * to temporarily map a patch so we can match the color. - */ - -#if (DCACHE_WAY_SIZE > PAGE_SIZE) -# define PAGE_COLOR_MASK (PAGE_MASK & (DCACHE_WAY_SIZE-1)) -# define PAGE_COLOR(a) \ - (((unsigned long)(a)&PAGE_COLOR_MASK) >> PAGE_SHIFT) -# define PAGE_COLOR_EQ(a,b) \ - ((((unsigned long)(a) ^ (unsigned long)(b)) & PAGE_COLOR_MASK) == 0) -# define PAGE_COLOR_MAP0(v) \ - (VMALLOC_END + ((unsigned long)(v) & PAGE_COLOR_MASK)) -# define PAGE_COLOR_MAP1(v) \ - (VMALLOC_END + ((unsigned long)(v) & PAGE_COLOR_MASK) + DCACHE_WAY_SIZE) -#endif /* * Allocating and freeing a pmd is trivial: the 1-entry pmd is * inside the pgd, so has no extra memory associated with it. */ -#define pgd_free(pgd) free_page((unsigned long)(pgd)) - -#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK +#define pmd_populate_kernel(mm, pmdp, ptep) \ + (pmd_val(*(pmdp)) = ((unsigned long)ptep)) +#define pmd_populate(mm, pmdp, page) \ + (pmd_val(*(pmdp)) = ((unsigned long)page_to_virt(page))) -static inline void -pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *pte) +static inline pgd_t* +pgd_alloc(struct mm_struct *mm) { - pmd_val(*(pmdp)) = (unsigned long)(pte); - __asm__ __volatile__ ("memw; dhwb %0, 0; dsync" :: "a" (pmdp)); + return (pgd_t*) __get_free_pages(GFP_KERNEL | __GFP_ZERO, PGD_ORDER); } -static inline void -pmd_populate(struct mm_struct *mm, pmd_t *pmdp, struct page *page) +static inline void pgd_free(pgd_t *pgd) { - pmd_val(*(pmdp)) = (unsigned long)page_to_virt(page); - __asm__ __volatile__ ("memw; dhwb %0, 0; dsync" :: "a" (pmdp)); + free_page((unsigned long)pgd); } +/* Use a slab cache for the pte pages (see also sparc64 implementation) */ +extern struct kmem_cache *pgtable_cache; -#else - -# define pmd_populate_kernel(mm, pmdp, pte) \ - (pmd_val(*(pmdp)) = (unsigned long)(pte)) -# define pmd_populate(mm, pmdp, page) \ - (pmd_val(*(pmdp)) = (unsigned long)page_to_virt(page)) - -#endif - -static inline pgd_t* -pgd_alloc(struct mm_struct *mm) +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) { - pgd_t *pgd; - - pgd = (pgd_t *)__get_free_pages(GFP_KERNEL|__GFP_ZERO, PGD_ORDER); - - if (likely(pgd != NULL)) - __flush_dcache_page((unsigned long)pgd); + return kmem_cache_alloc(pgtable_cache, GFP_KERNEL|__GFP_REPEAT); +} - return pgd; +static inline struct page *pte_alloc_one(struct mm_struct *mm, + unsigned long addr) +{ + return virt_to_page(pte_alloc_one_kernel(mm, addr)); } -extern pte_t* pte_alloc_one_kernel(struct mm_struct* mm, unsigned long addr); -extern struct page* pte_alloc_one(struct mm_struct* mm, unsigned long addr); +static inline void pte_free_kernel(pte_t *pte) +{ + kmem_cache_free(pgtable_cache, pte); +} -#define pte_free_kernel(pte) free_page((unsigned long)pte) -#define pte_free(pte) __free_page(pte) +static inline void pte_free(struct page *page) +{ + kmem_cache_free(pgtable_cache, page_address(page)); +} #endif /* __KERNEL__ */ #endif /* _XTENSA_PGALLOC_H */ diff --git a/include/asm-xtensa/pgtable.h b/include/asm-xtensa/pgtable.h index 667a6c46b5a..c0fcc1c9660 100644 --- a/include/asm-xtensa/pgtable.h +++ b/include/asm-xtensa/pgtable.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-xtensa/pgtable.h + * include/asm-xtensa/pgtable.h * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -60,16 +60,20 @@ #define FIRST_USER_ADDRESS 0 #define FIRST_USER_PGD_NR (FIRST_USER_ADDRESS >> PGDIR_SHIFT) -/* virtual memory area. We keep a distance to other memory regions to be +/* + * Virtual memory area. We keep a distance to other memory regions to be * on the safe side. We also use this area for cache aliasing. */ -// FIXME: virtual memory area must be configuration-dependent - #define VMALLOC_START 0xC0000000 -#define VMALLOC_END 0xC7FF0000 +#define VMALLOC_END 0xC6FEFFFF +#define TLBTEMP_BASE_1 0xC6FF0000 +#define TLBTEMP_BASE_2 0xC6FF8000 +#define MODULE_START 0xC7000000 +#define MODULE_END 0xC7FFFFFF -/* Xtensa Linux config PTE layout (when present): +/* + * Xtensa Linux config PTE layout (when present): * 31-12: PPN * 11-6: Software * 5-4: RING @@ -126,12 +130,13 @@ #define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_WRITABLE) #define PAGE_SHARED_EXEC \ __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_WRITABLE | _PAGE_HW_EXEC) -#define PAGE_KERNEL __pgprot(_PAGE_PRESENT) +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_HW_WRITE) +#define PAGE_KERNEL_EXEC __pgprot(_PAGE_PRESENT|_PAGE_HW_WRITE|_PAGE_HW_EXEC) #if (DCACHE_WAY_SIZE > PAGE_SIZE) -# define _PAGE_DIRECTORY (_PAGE_VALID | _PAGE_ACCESSED | _PAGE_HW_WRITE) +# define _PAGE_DIRECTORY (_PAGE_VALID | _PAGE_ACCESSED) #else -# define _PAGE_DIRECTORY (_PAGE_VALID|_PAGE_ACCESSED|_PAGE_HW_WRITE|_PAGE_CA_WB) +# define _PAGE_DIRECTORY (_PAGE_VALID | _PAGE_ACCESSED | _PAGE_CA_WB) #endif #else /* no mmu */ @@ -244,6 +249,10 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) static inline void update_pte(pte_t *ptep, pte_t pteval) { *ptep = pteval; +#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK + __asm__ __volatile__ ("dhwb %0, 0" :: "a" (ptep)); +#endif + } struct mm_struct; @@ -383,13 +392,12 @@ extern void update_mmu_cache(struct vm_area_struct * vma, * remap a physical page `pfn' of size `size' with page protection `prot' * into virtual address `from' */ + #define io_remap_pfn_range(vma,from,pfn,size,prot) \ remap_pfn_range(vma, from, pfn, size, prot) -/* No page table caches to init */ - -#define pgtable_cache_init() do { } while (0) +extern void pgtable_cache_init(void); typedef pte_t *pte_addr_t; diff --git a/include/asm-xtensa/tlb.h b/include/asm-xtensa/tlb.h index 4562b2dcfbc..4830232017a 100644 --- a/include/asm-xtensa/tlb.h +++ b/include/asm-xtensa/tlb.h @@ -11,14 +11,36 @@ #ifndef _XTENSA_TLB_H #define _XTENSA_TLB_H -#define tlb_start_vma(tlb,vma) do { } while (0) -#define tlb_end_vma(tlb,vma) do { } while (0) -#define __tlb_remove_tlb_entry(tlb,pte,addr) do { } while (0) +#include +#include + +#if (DCACHE_WAY_SIZE <= PAGE_SIZE) + +/* Note, read http://lkml.org/lkml/2004/1/15/6 */ + +# define tlb_start_vma(tlb,vma) do { } while (0) +# define tlb_end_vma(tlb,vma) do { } while (0) + +#else +# define tlb_start_vma(tlb, vma) \ + do { \ + if (!tlb->fullmm) \ + flush_cache_range(vma, vma->vm_start, vma->vm_end); \ + } while(0) + +# define tlb_end_vma(tlb, vma) \ + do { \ + if (!tlb->fullmm) \ + flush_tlb_range(vma, vma->vm_start, vma->vm_end); \ + } while(0) + +#endif + +#define __tlb_remove_tlb_entry(tlb,pte,addr) do { } while (0) #define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) #include -#include #define __pte_free_tlb(tlb,pte) pte_free(pte) -- cgit v1.2.3-70-g09d2 From 969f865f36b65c2fcd1fb1ba09b4a2c6f071f864 Mon Sep 17 00:00:00 2001 From: Frederik Deweerdt Date: Wed, 22 Aug 2007 10:47:58 -0700 Subject: [patch 2/2] xtensa console.c: remove duplicate #include This patch removes one of the two linux/console.h included in arch/xtensa/platform-iss/console.c Signed-off-by: Frederik Deweerdt Signed-off-by: Andrew Morton Signed-off-by: Chris Zankel --- arch/xtensa/platform-iss/console.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/xtensa/platform-iss/console.c b/arch/xtensa/platform-iss/console.c index 2f4f20ffe66..854677d0c3f 100644 --- a/arch/xtensa/platform-iss/console.c +++ b/arch/xtensa/platform-iss/console.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3-70-g09d2 From ebb2a97b2e7422176d52f4f33e3ee400653875b4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 22 Aug 2007 10:54:43 -0700 Subject: [patch 1/2] Xtensa: enable arbitary tty speed setting ioctls Adding the defines/constants activates the existing code in the tty layer and allows arbitary tty speeds to be requested on this platform Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Chris Zankel --- include/asm-xtensa/ioctls.h | 4 ++++ include/asm-xtensa/termbits.h | 5 ++++- include/asm-xtensa/termios.h | 6 ++++-- 3 files changed, 12 insertions(+), 3 deletions(-) diff --git a/include/asm-xtensa/ioctls.h b/include/asm-xtensa/ioctls.h index 39e6f23921b..0ffa942954b 100644 --- a/include/asm-xtensa/ioctls.h +++ b/include/asm-xtensa/ioctls.h @@ -91,6 +91,10 @@ #define TIOCSBRK _IO('T', 39) /* BSD compatibility */ #define TIOCCBRK _IO('T', 40) /* BSD compatibility */ #define TIOCGSID _IOR('T', 41, pid_t) /* Return the session ID of FD*/ +#define TCGETS2 _IOR('T', 42, struct termios2) +#define TCSETS2 _IOW('T', 43, struct termios2) +#define TCSETSW2 _IOW('T', 44, struct termios2) +#define TCSETSF2 _IOW('T', 45, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ diff --git a/include/asm-xtensa/termbits.h b/include/asm-xtensa/termbits.h index 9972c25ec86..85aa6a3c0b6 100644 --- a/include/asm-xtensa/termbits.h +++ b/include/asm-xtensa/termbits.h @@ -157,6 +157,7 @@ struct ktermios { #define HUPCL 0002000 #define CLOCAL 0004000 #define CBAUDEX 0010000 +#define BOTHER 0010000 #define B57600 0010001 #define B115200 0010002 #define B230400 0010003 @@ -172,10 +173,12 @@ struct ktermios { #define B3000000 0010015 #define B3500000 0010016 #define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate (not used) */ +#define CIBAUD 002003600000 /* input baud rate */ #define CMSPAR 010000000000 /* mark or space (stick) parity */ #define CRTSCTS 020000000000 /* flow control */ +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + /* c_lflag bits */ #define ISIG 0000001 diff --git a/include/asm-xtensa/termios.h b/include/asm-xtensa/termios.h index f14b42c8dac..4673f42f88a 100644 --- a/include/asm-xtensa/termios.h +++ b/include/asm-xtensa/termios.h @@ -95,8 +95,10 @@ struct termio { copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ }) -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) #endif /* __KERNEL__ */ -- cgit v1.2.3-70-g09d2 From 134c21715ac3cb36db13c8d362cc80ccc87ee48d Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Tue, 28 Aug 2007 14:58:56 -0400 Subject: ACPI: (more) delete CONFIG_ACPI_PROCFS_SLEEP (again) Commit 2bcf9dddeb8e79a4ba55bf191533f70f39ce ('ACPI: delete CONFIG_ACPI_PROCFS_SLEEP (again)') was incomplete. Signed-off-by: Christian Borntraeger Signed-off-by: Len Brown --- drivers/acpi/sleep/proc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 66b62b0d360..3839efd5eae 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -23,7 +23,7 @@ */ ACPI_MODULE_NAME("sleep") -#ifdef CONFIG_ACPI_PROCFS_SLEEP +#ifdef CONFIG_ACPI_PROCFS static int acpi_system_sleep_seq_show(struct seq_file *seq, void *offset) { int i; @@ -76,7 +76,7 @@ acpi_system_write_sleep(struct file *file, Done: return error ? error : count; } -#endif /* CONFIG_ACPI_PROCFS_SLEEP */ +#endif /* CONFIG_ACPI_PROCFS */ #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || !defined(CONFIG_X86) /* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */ @@ -471,7 +471,7 @@ static const struct file_operations acpi_system_wakeup_device_fops = { .release = single_release, }; -#ifdef CONFIG_ACPI_PROCFS_SLEEP +#ifdef CONFIG_ACPI_PROCFS static const struct file_operations acpi_system_sleep_fops = { .open = acpi_system_sleep_open_fs, .read = seq_read, @@ -479,7 +479,7 @@ static const struct file_operations acpi_system_sleep_fops = { .llseek = seq_lseek, .release = single_release, }; -#endif /* CONFIG_ACPI_PROCFS_SLEEP */ +#endif /* CONFIG_ACPI_PROCFS */ #ifdef HAVE_ACPI_LEGACY_ALARM static const struct file_operations acpi_system_alarm_fops = { @@ -506,7 +506,7 @@ static int __init acpi_sleep_proc_init(void) if (acpi_disabled) return 0; -#ifdef CONFIG_ACPI_PROCFS_SLEEP +#ifdef CONFIG_ACPI_PROCFS /* 'sleep' [R/W] */ entry = create_proc_entry("sleep", S_IFREG | S_IRUGO | S_IWUSR, -- cgit v1.2.3-70-g09d2 From cb90ab5b424e711390c2ef6f0882b615b042dcb6 Mon Sep 17 00:00:00 2001 From: Jonathan Woithe Date: Wed, 29 Aug 2007 15:58:19 +0930 Subject: msi-laptop: replace ',' with ';' Signed-off-by: Jonathan Woithe Signed-off-by: Len Brown --- drivers/misc/msi-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/msi-laptop.c b/drivers/misc/msi-laptop.c index 932a415197b..349be934db7 100644 --- a/drivers/misc/msi-laptop.c +++ b/drivers/misc/msi-laptop.c @@ -353,7 +353,7 @@ static int __init msi_init(void) if (IS_ERR(msibl_device)) return PTR_ERR(msibl_device); - msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1, + msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1; ret = platform_driver_register(&msipf_driver); if (ret) -- cgit v1.2.3-70-g09d2 From 66baf327ae5d4c17e75d1f501145e79eaeeaf649 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Mon, 3 Sep 2007 00:03:35 -0300 Subject: ACPI: fix CONFIG_NET=n acpi_bus_generate_netlink_event build failure drivers/acpi/event.c:243: error: 'acpi_generate_netlink_event' undeclared here (not in a function) Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/acpi/event.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/event.c b/drivers/acpi/event.c index a2b9304596c..5c95863f8fa 100644 --- a/drivers/acpi/event.c +++ b/drivers/acpi/event.c @@ -240,7 +240,7 @@ int acpi_bus_generate_netlink_event(const char *device_class, return 0; } -EXPORT_SYMBOL(acpi_generate_netlink_event); +EXPORT_SYMBOL(acpi_bus_generate_netlink_event); static int acpi_event_genetlink_init(void) { -- cgit v1.2.3-70-g09d2 From 0931ce8439365358b1cacf888ddc8fb008036125 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 12 Sep 2007 16:30:15 +0800 Subject: Blackfin arch: fix some bugs in lib/string.h functions found by our string testing modules - use ints for the return value rather than char since we actually return an int and we dont want it improperly being sign extended during the reload http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3525 - if src is shorter than the requested number of copy bytes, we need to null pad the rest http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3524 - mark these as __volatile__ and add memory to the clobber list so gcc does not optimize buffers around on us we may be using - rewrite asm code to be readable/maintainable Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- include/asm-blackfin/string.h | 129 ++++++++++++++++++++++++++---------------- 1 file changed, 80 insertions(+), 49 deletions(-) diff --git a/include/asm-blackfin/string.h b/include/asm-blackfin/string.h index 6f1eb7d6d3c..e8ada91ab00 100644 --- a/include/asm-blackfin/string.h +++ b/include/asm-blackfin/string.h @@ -9,13 +9,16 @@ extern inline char *strcpy(char *dest, const char *src) char *xdest = dest; char temp = 0; - __asm__ __volatile__ - ("1:\t%2 = B [%1++] (Z);\n\t" - "B [%0++] = %2;\n\t" - "CC = %2;\n\t" - "if cc jump 1b (bp);\n" - : "+&a" (dest), "+&a" (src), "=&d" (temp) - ::"memory", "CC"); + __asm__ __volatile__ ( + "1:" + "%2 = B [%1++] (Z);" + "B [%0++] = %2;" + "CC = %2;" + "if cc jump 1b (bp);" + : "+&a" (dest), "+&a" (src), "=&d" (temp) + : + : "memory", "CC"); + return xdest; } @@ -28,37 +31,56 @@ extern inline char *strncpy(char *dest, const char *src, size_t n) if (n == 0) return xdest; - __asm__ __volatile__ - ("1:\t%3 = B [%1++] (Z);\n\t" - "B [%0++] = %3;\n\t" - "CC = %3;\n\t" - "if ! cc jump 2f;\n\t" - "%2 += -1;\n\t" - "CC = %2 == 0;\n\t" - "if ! cc jump 1b (bp);\n" - "2:\n" - : "+&a" (dest), "+&a" (src), "+&da" (n), "=&d" (temp) - ::"memory", "CC"); + __asm__ __volatile__ ( + "1:" + "%3 = B [%1++] (Z);" + "B [%0++] = %3;" + "CC = %3;" + "if ! cc jump 2f;" + "%2 += -1;" + "CC = %2 == 0;" + "if ! cc jump 1b (bp);" + "jump 4f;" + "2:" + /* if src is shorter than n, we need to null pad bytes now */ + "%3 = 0;" + "3:" + "%2 += -1;" + "CC = %2 == 0;" + "if cc jump 4f;" + "B [%0++] = %3;" + "jump 3b;" + "4:" + : "+&a" (dest), "+&a" (src), "+&da" (n), "=&d" (temp) + : + : "memory", "CC"); + return xdest; } #define __HAVE_ARCH_STRCMP extern inline int strcmp(const char *cs, const char *ct) { - char __res1, __res2; - - __asm__ - ("1:\t%2 = B[%0++] (Z);\n\t" /* get *cs */ - "%3 = B[%1++] (Z);\n\t" /* get *ct */ - "CC = %2 == %3;\n\t" /* compare a byte */ - "if ! cc jump 2f;\n\t" /* not equal, break out */ - "CC = %2;\n\t" /* at end of cs? */ - "if cc jump 1b (bp);\n\t" /* no, keep going */ - "jump.s 3f;\n" /* strings are equal */ - "2:\t%2 = %2 - %3;\n" /* *cs - *ct */ - "3:\n" - : "+&a" (cs), "+&a" (ct), "=&d" (__res1), "=&d" (__res2) - : : "CC"); + /* need to use int's here so the char's in the assembly don't get + * sign extended incorrectly when we don't want them to be + */ + int __res1, __res2; + + __asm__ __volatile__ ( + "1:" + "%2 = B[%0++] (Z);" /* get *cs */ + "%3 = B[%1++] (Z);" /* get *ct */ + "CC = %2 == %3;" /* compare a byte */ + "if ! cc jump 2f;" /* not equal, break out */ + "CC = %2;" /* at end of cs? */ + "if cc jump 1b (bp);" /* no, keep going */ + "jump.s 3f;" /* strings are equal */ + "2:" + "%2 = %2 - %3;" /* *cs - *ct */ + "3:" + : "+&a" (cs), "+&a" (ct), "=&d" (__res1), "=&d" (__res2) + : + : "memory", "CC"); return __res1; } @@ -66,26 +88,35 @@ extern inline int strcmp(const char *cs, const char *ct) #define __HAVE_ARCH_STRNCMP extern inline int strncmp(const char *cs, const char *ct, size_t count) { - char __res1, __res2; + /* need to use int's here so the char's in the assembly don't get + * sign extended incorrectly when we don't want them to be + */ + int __res1, __res2; if (!count) return 0; - __asm__ - ("1:\t%3 = B[%0++] (Z);\n\t" /* get *cs */ - "%4 = B[%1++] (Z);\n\t" /* get *ct */ - "CC = %3 == %4;\n\t" /* compare a byte */ - "if ! cc jump 3f;\n\t" /* not equal, break out */ - "CC = %3;\n\t" /* at end of cs? */ - "if ! cc jump 4f;\n\t" /* yes, all done */ - "%2 += -1;\n\t" /* no, adjust count */ - "CC = %2 == 0;\n\t" - "if ! cc jump 1b;\n" /* more to do, keep going */ - "2:\t%3 = 0;\n\t" /* strings are equal */ - "jump.s 4f;\n" - "3:\t%3 = %3 - %4;\n" /* *cs - *ct */ - "4:" - : "+&a" (cs), "+&a" (ct), "+&da" (count), "=&d" (__res1), "=&d" (__res2) - : : "CC"); + + __asm__ __volatile__ ( + "1:" + "%3 = B[%0++] (Z);" /* get *cs */ + "%4 = B[%1++] (Z);" /* get *ct */ + "CC = %3 == %4;" /* compare a byte */ + "if ! cc jump 3f;" /* not equal, break out */ + "CC = %3;" /* at end of cs? */ + "if ! cc jump 4f;" /* yes, all done */ + "%2 += -1;" /* no, adjust count */ + "CC = %2 == 0;" + "if ! cc jump 1b;" /* more to do, keep going */ + "2:" + "%3 = 0;" /* strings are equal */ + "jump.s 4f;" + "3:" + "%3 = %3 - %4;" /* *cs - *ct */ + "4:" + : "+&a" (cs), "+&a" (ct), "+&da" (count), "=&d" (__res1), "=&d" (__res2) + : + : "memory", "CC"); + return __res1; } -- cgit v1.2.3-70-g09d2 From 5f08e46b621a769e52a9545a23ab1d5fb2aec1d4 Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Fri, 7 Sep 2007 20:25:01 -0400 Subject: atl1: disable broken 64-bit DMA 64-bit DMA causes data corruption with atl1. We don't know why, and Atheros is working on it. For now, just use 32-bit DMA. This is a big hack that is probably wrong, but it stops the bleeding. Signed-off-by: Luca Tettamanti Acked-by: Chris Snook Acked-by: Jay Cliburn Signed-off-by: Jeff Garzik --- drivers/net/atl1/atl1_main.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c index 3c1984ecf36..f23e13c8f9a 100644 --- a/drivers/net/atl1/atl1_main.c +++ b/drivers/net/atl1/atl1_main.c @@ -2203,21 +2203,20 @@ static int __devinit atl1_probe(struct pci_dev *pdev, struct net_device *netdev; struct atl1_adapter *adapter; static int cards_found = 0; - bool pci_using_64 = true; int err; err = pci_enable_device(pdev); if (err) return err; - err = pci_set_dma_mask(pdev, DMA_64BIT_MASK); + /* + * 64-bit DMA currently has data corruption problems, so let's just + * use 32-bit DMA for now. This is a big hack that is probably wrong. + */ + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (err) { - err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (err) { - dev_err(&pdev->dev, "no usable DMA configuration\n"); - goto err_dma; - } - pci_using_64 = false; + dev_err(&pdev->dev, "no usable DMA configuration\n"); + goto err_dma; } /* Mark all PCI regions associated with PCI device * pdev as being reserved by owner atl1_driver_name @@ -2282,7 +2281,6 @@ static int __devinit atl1_probe(struct pci_dev *pdev, netdev->ethtool_ops = &atl1_ethtool_ops; adapter->bd_number = cards_found; - adapter->pci_using_64 = pci_using_64; /* setup the private structure */ err = atl1_sw_init(adapter); @@ -2299,9 +2297,6 @@ static int __devinit atl1_probe(struct pci_dev *pdev, */ /* netdev->features |= NETIF_F_TSO; */ - if (pci_using_64) - netdev->features |= NETIF_F_HIGHDMA; - netdev->features |= NETIF_F_LLTX; /* -- cgit v1.2.3-70-g09d2 From d1b139c039704c391ab47c6c9540c28f7fcaa489 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 5 Sep 2007 16:56:19 +0100 Subject: sky2: restore multicast list on resume and other ops Need to restore multicast settings on resume and after 'ethtool -r'. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index e6d937ec688..5d812de65d9 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -149,6 +149,8 @@ static const char *yukon2_name[] = { "FE", /* 0xb7 */ }; +static void sky2_set_multicast(struct net_device *dev); + /* Access to external PHY */ static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) { @@ -2900,8 +2902,10 @@ static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) sky2->autoneg = ecmd->autoneg; sky2->advertising = ecmd->advertising; - if (netif_running(dev)) + if (netif_running(dev)) { sky2_phy_reinit(sky2); + sky2_set_multicast(dev); + } return 0; } @@ -2994,6 +2998,7 @@ static int sky2_nway_reset(struct net_device *dev) return -EINVAL; sky2_phy_reinit(sky2); + sky2_set_multicast(dev); return 0; } @@ -4171,6 +4176,8 @@ static int sky2_resume(struct pci_dev *pdev) dev_close(dev); goto out; } + + sky2_set_multicast(dev); } } -- cgit v1.2.3-70-g09d2 From 026d7917e592f91063861e002adf1c806d7756ae Mon Sep 17 00:00:00 2001 From: Hans-Jürgen Koch Date: Fri, 31 Aug 2007 14:30:08 +0200 Subject: Fix a lock problem in generic phy code Lock debugging finds a problem in phy.c and phy_device.c, this patch fixes it. Tested on an AT91SAM9263-EK board, kernel 2.6.23-rc4. Signed-off-by: Hans J. Koch Signed-off-by: Jeff Garzik --- drivers/net/phy/phy.c | 4 ++-- drivers/net/phy/phy_device.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index e323efd4ed1..0cc4369cacb 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -755,7 +755,7 @@ out_unlock: */ void phy_start(struct phy_device *phydev) { - spin_lock(&phydev->lock); + spin_lock_bh(&phydev->lock); switch (phydev->state) { case PHY_STARTING: @@ -769,7 +769,7 @@ void phy_start(struct phy_device *phydev) default: break; } - spin_unlock(&phydev->lock); + spin_unlock_bh(&phydev->lock); } EXPORT_SYMBOL(phy_stop); EXPORT_SYMBOL(phy_start); diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index e275df8c55b..49328e05050 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -644,7 +644,7 @@ static int phy_probe(struct device *dev) if (!(phydrv->flags & PHY_HAS_INTERRUPT)) phydev->irq = PHY_POLL; - spin_lock(&phydev->lock); + spin_lock_bh(&phydev->lock); /* Start out supporting everything. Eventually, * a controller will attach, and may modify one @@ -658,7 +658,7 @@ static int phy_probe(struct device *dev) if (phydev->drv->probe) err = phydev->drv->probe(phydev); - spin_unlock(&phydev->lock); + spin_unlock_bh(&phydev->lock); return err; -- cgit v1.2.3-70-g09d2 From 8759cf76e9a6322fc68dcbfaa1cbad00c74b199e Mon Sep 17 00:00:00 2001 From: Jan-Bernd Themann Date: Fri, 7 Sep 2007 12:30:17 +0200 Subject: ehea: propagate physical port state Introduces a module parameter to decide whether the physical port link state is propagated to the network stack or not. It makes sense not to take the physical port state into account on machines with more logical partitions that communicate with each other. This is always possible no matter what the physical port state is. Thus eHEA can be considered as a switch there. Signed-off-by: Jan-Bernd Themann Signed-off-by: Jeff Garzik --- drivers/net/ehea/ehea.h | 5 ++++- drivers/net/ehea/ehea_main.c | 14 +++++++++++++- 2 files changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index d67f97bfa3a..8d58be56f4e 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -39,7 +39,7 @@ #include #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0073" +#define DRV_VERSION "EHEA_0074" /* eHEA capability flags */ #define DLPAR_PORT_ADD_REM 1 @@ -402,6 +402,8 @@ struct ehea_mc_list { #define EHEA_PORT_UP 1 #define EHEA_PORT_DOWN 0 +#define EHEA_PHY_LINK_UP 1 +#define EHEA_PHY_LINK_DOWN 0 #define EHEA_MAX_PORT_RES 16 struct ehea_port { struct ehea_adapter *adapter; /* adapter that owns this port */ @@ -427,6 +429,7 @@ struct ehea_port { u32 msg_enable; u32 sig_comp_iv; u32 state; + u8 phy_link; u8 full_duplex; u8 autoneg; u8 num_def_qps; diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index db5747490a0..1e9fd6f3691 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -53,17 +53,21 @@ static int rq3_entries = EHEA_DEF_ENTRIES_RQ3; static int sq_entries = EHEA_DEF_ENTRIES_SQ; static int use_mcs = 0; static int num_tx_qps = EHEA_NUM_TX_QP; +static int prop_carrier_state = 0; module_param(msg_level, int, 0); module_param(rq1_entries, int, 0); module_param(rq2_entries, int, 0); module_param(rq3_entries, int, 0); module_param(sq_entries, int, 0); +module_param(prop_carrier_state, int, 0); module_param(use_mcs, int, 0); module_param(num_tx_qps, int, 0); MODULE_PARM_DESC(num_tx_qps, "Number of TX-QPS"); MODULE_PARM_DESC(msg_level, "msg_level"); +MODULE_PARM_DESC(prop_carrier_state, "Propagate carrier state of physical " + "port to stack. 1:yes, 0:no. Default = 0 "); MODULE_PARM_DESC(rq3_entries, "Number of entries for Receive Queue 3 " "[2^x - 1], x = [6..14]. Default = " __MODULE_STRING(EHEA_DEF_ENTRIES_RQ3) ")"); @@ -814,7 +818,9 @@ int ehea_set_portspeed(struct ehea_port *port, u32 port_speed) ehea_error("Failed setting port speed"); } } - netif_carrier_on(port->netdev); + if (!prop_carrier_state || (port->phy_link == EHEA_PHY_LINK_UP)) + netif_carrier_on(port->netdev); + kfree(cb4); out: return ret; @@ -869,13 +875,19 @@ static void ehea_parse_eqe(struct ehea_adapter *adapter, u64 eqe) } if (EHEA_BMASK_GET(NEQE_EXTSWITCH_PORT_UP, eqe)) { + port->phy_link = EHEA_PHY_LINK_UP; if (netif_msg_link(port)) ehea_info("%s: Physical port up", port->netdev->name); + if (prop_carrier_state) + netif_carrier_on(port->netdev); } else { + port->phy_link = EHEA_PHY_LINK_DOWN; if (netif_msg_link(port)) ehea_info("%s: Physical port down", port->netdev->name); + if (prop_carrier_state) + netif_carrier_off(port->netdev); } if (EHEA_BMASK_GET(NEQE_EXTSWITCH_PRIMARY, eqe)) -- cgit v1.2.3-70-g09d2 From 64251621796d5d4c0c4b6a6b6d845e4a43c63aee Mon Sep 17 00:00:00 2001 From: Jan-Bernd Themann Date: Fri, 7 Sep 2007 12:30:24 +0200 Subject: ehea: fix last_rx update Update last_rx in registered device struct instead of in the dummy device. Signed-off-by: Jan-Bernd Themann Signed-off-by: Jeff Garzik --- drivers/net/ehea/ehea_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 1e9fd6f3691..717b12984d1 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -471,7 +471,7 @@ static struct ehea_cqe *ehea_proc_rwqes(struct net_device *dev, else netif_receive_skb(skb); - dev->last_rx = jiffies; + port->netdev->last_rx = jiffies; } else { pr->p_stats.poll_receive_errors++; port_reset = ehea_treat_poll_error(pr, rq, cqe, -- cgit v1.2.3-70-g09d2 From a041fe2e8d0bd749b2416ef79adc416e24af7c63 Mon Sep 17 00:00:00 2001 From: Ishizaki Kou Date: Mon, 20 Aug 2007 22:13:27 +0900 Subject: spidernet: fix interrupt reason recognition This patch solves a problem that the spidernet driver sometimes fails to handle IRQ. The problem happens because, - In Cell architecture, interrupts may arrive at an interrupt controller, even if they are masked by the setting on registers of devices. It happens when interrupt packets are sent just before the interrupts are masked. - spidernet interrupt handler compares interrupt reasons with interrupt masks, so when such interrupts occurs, spidernet interrupt handler returns IRQ_NONE. - When all of interrupt handler return IRQ_NONE, linux kernel disables the IRQ and it no longer delivers interrupts to the interrupt handlers. spidernet doesn't work after above sequence, because it can't receive interrupts. This patch changes spidernet interrupt handler that it compares interrupt reason with SPIDER_NET_INTX_MASK_VALUE. Signed-off-by: Kou Ishizaki Signed-off-by: Jeff Garzik --- drivers/net/spider_net.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 590b12c7246..82d837ab4db 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -1441,17 +1441,14 @@ static void spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg) { u32 error_reg1, error_reg2; - u32 mask_reg1, mask_reg2; u32 i; int show_error = 1; error_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1STS); error_reg2 = spider_net_read_reg(card, SPIDER_NET_GHIINT2STS); - mask_reg1 = spider_net_read_reg(card, SPIDER_NET_GHIINT1MSK); - mask_reg2 = spider_net_read_reg(card,SPIDER_NET_GHIINT2MSK); - error_reg1 &= mask_reg1; - error_reg2 &= mask_reg2; + error_reg1 &= SPIDER_NET_INT1_MASK_VALUE; + error_reg2 &= SPIDER_NET_INT2_MASK_VALUE; /* check GHIINT0STS ************************************/ if (status_reg) @@ -1679,11 +1676,10 @@ spider_net_interrupt(int irq, void *ptr) { struct net_device *netdev = ptr; struct spider_net_card *card = netdev_priv(netdev); - u32 status_reg, mask_reg; + u32 status_reg; status_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0STS); - mask_reg = spider_net_read_reg(card, SPIDER_NET_GHIINT0MSK); - status_reg &= mask_reg; + status_reg &= SPIDER_NET_INT0_MASK_VALUE; if (!status_reg) return IRQ_NONE; -- cgit v1.2.3-70-g09d2 From 7d2c592609a7da950b458403f1936d382f38ff9c Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 20 Aug 2007 10:48:05 -0400 Subject: USB: disable autosuspend by default for non-hubs This patch (as965) disables autosuspend by default for all USB devices other than hubs. We are seeing too many devices that can't suspend or resume properly, the blacklist is growing unreasonably quickly, and this sort of thing should be handled in userspace. Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 7f17d0fd76c..ebf3dc20110 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -152,4 +152,10 @@ void usb_detect_quirks(struct usb_device *udev) /* do any special quirk handling here if needed */ if (udev->quirks & USB_QUIRK_NO_AUTOSUSPEND) usb_autosuspend_quirk(udev); + + /* By default, disable autosuspend for all non-hubs */ +#ifdef CONFIG_USB_SUSPEND + if (udev->descriptor.bDeviceClass != USB_CLASS_HUB) + udev->autosuspend_delay = -1; +#endif } -- cgit v1.2.3-70-g09d2 From d526875deb42e0f4c0d31cb50b4e5bfaf19c3138 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 13 Sep 2007 06:01:24 -0700 Subject: Revert "usb-storage: implement autosuspend" This reverts commit 8dfe4b14869fd185ca25ee88b02ada58a3005eaf. There are a number of issues still remaining in usb-storage autosuspend, so, to be safe, we need to revert this for now. Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/scsiglue.c | 13 ++++--------- drivers/usb/storage/usb.c | 27 +++++++-------------------- 2 files changed, 11 insertions(+), 29 deletions(-) diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 47e56079925..1ba19eaa197 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -285,15 +285,10 @@ static int device_reset(struct scsi_cmnd *srb) US_DEBUGP("%s called\n", __FUNCTION__); - result = usb_autopm_get_interface(us->pusb_intf); - if (result == 0) { - - /* lock the device pointers and do the reset */ - mutex_lock(&(us->dev_mutex)); - result = us->transport_reset(us); - mutex_unlock(&us->dev_mutex); - usb_autopm_put_interface(us->pusb_intf); - } + /* lock the device pointers and do the reset */ + mutex_lock(&(us->dev_mutex)); + result = us->transport_reset(us); + mutex_unlock(&us->dev_mutex); return result < 0 ? FAILED : SUCCESS; } diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 25e557d4fe6..59181667066 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -184,14 +184,16 @@ static int storage_suspend(struct usb_interface *iface, pm_message_t message) { struct us_data *us = usb_get_intfdata(iface); - US_DEBUGP("%s\n", __FUNCTION__); - /* Wait until no command is running */ mutex_lock(&us->dev_mutex); + US_DEBUGP("%s\n", __FUNCTION__); if (us->suspend_resume_hook) (us->suspend_resume_hook)(us, US_SUSPEND); + /* When runtime PM is working, we'll set a flag to indicate + * whether we should autoresume when a SCSI request arrives. */ + mutex_unlock(&us->dev_mutex); return 0; } @@ -200,11 +202,13 @@ static int storage_resume(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); - US_DEBUGP("%s\n", __FUNCTION__); + mutex_lock(&us->dev_mutex); + US_DEBUGP("%s\n", __FUNCTION__); if (us->suspend_resume_hook) (us->suspend_resume_hook)(us, US_RESUME); + mutex_unlock(&us->dev_mutex); return 0; } @@ -302,7 +306,6 @@ static int usb_stor_control_thread(void * __us) { struct us_data *us = (struct us_data *)__us; struct Scsi_Host *host = us_to_host(us); - int autopm_rc; for(;;) { US_DEBUGP("*** thread sleeping.\n"); @@ -311,9 +314,6 @@ static int usb_stor_control_thread(void * __us) US_DEBUGP("*** thread awakened.\n"); - /* Autoresume the device */ - autopm_rc = usb_autopm_get_interface(us->pusb_intf); - /* lock the device pointers */ mutex_lock(&(us->dev_mutex)); @@ -372,12 +372,6 @@ static int usb_stor_control_thread(void * __us) us->srb->result = SAM_STAT_GOOD; } - /* Did the autoresume fail? */ - else if (autopm_rc < 0) { - US_DEBUGP("Could not wake device\n"); - us->srb->result = DID_ERROR << 16; - } - /* we've got a command, let's do it! */ else { US_DEBUG(usb_stor_show_command(us->srb)); @@ -420,10 +414,6 @@ SkipForAbort: /* unlock the device pointers */ mutex_unlock(&us->dev_mutex); - - /* Start an autosuspend */ - if (autopm_rc == 0) - usb_autopm_put_interface(us->pusb_intf); } /* for (;;) */ /* Wait until we are told to stop */ @@ -941,7 +931,6 @@ retry: /* Should we unbind if no devices were detected? */ } - usb_autopm_put_interface(us->pusb_intf); complete_and_exit(&us->scanning_done, 0); } @@ -1027,7 +1016,6 @@ static int storage_probe(struct usb_interface *intf, goto BadDevice; } - usb_autopm_get_interface(intf); /* dropped in the scanning thread */ wake_up_process(th); return 0; @@ -1065,7 +1053,6 @@ static struct usb_driver usb_storage_driver = { .pre_reset = storage_pre_reset, .post_reset = storage_post_reset, .id_table = storage_usb_ids, - .supports_autosuspend = 1, }; static int __init usb_stor_init(void) -- cgit v1.2.3-70-g09d2 From a53d6fb83efc75bbd7876459e6e1291c4925103d Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 3 Sep 2007 09:43:54 +0100 Subject: [ARM] realview: disable second GIC on RevB MPCore platforms The second GIC asserts a permanent interrupt on Rev.B MPCore platforms. Disable initialisation of this GIC to avoid unbootable systems. Signed-off-by: Russell King --- arch/arm/mach-realview/realview_eb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 3dba666151d..ecec2f85c4c 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -165,7 +165,7 @@ static void __init gic_init_irq(void) #endif gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29); gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE)); -#ifdef CONFIG_REALVIEW_MPCORE +#if defined(CONFIG_REALVIEW_MPCORE) && !defined(CONFIG_REALVIEW_MPCORE_REVB) gic_dist_init(1, __io_address(REALVIEW_GIC1_DIST_BASE), 64); gic_cpu_init(1, __io_address(REALVIEW_GIC1_CPU_BASE)); gic_cascade_irq(1, IRQ_EB_IRQ1); -- cgit v1.2.3-70-g09d2 From b9338a78fc21e980d33c58b31f3bb37cd48a68f6 Mon Sep 17 00:00:00 2001 From: Tzachi Perelstein Date: Sun, 9 Sep 2007 14:24:59 +0100 Subject: [ARM] 4567/1: Fix 'Oops - undefined instruction' when CONFIG_VFP=y on non VFP device vfp_init() takes care of the condition when CONFIG_VFP=y but no real VFP device exists. However, when this condition is true, a compiler might misplace code lines in a way that will break this support. (To be more specific - fmrx(FPSID) might be executed before vfp_testing_entry assignment, which will end up with Oops - undefined instruction). This patch adds a barrier() to guarantee the right execution ordering. Signed-off-by: Assaf Hoffman Signed-off-by: Russell King --- arch/arm/vfp/vfpmodule.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 04ddab2bd87..eea3f50743d 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -323,6 +323,7 @@ static int __init vfp_init(void) * we just need to read the VFPSID register. */ vfp_vector = vfp_testing_entry; + barrier(); vfpsid = fmrx(FPSID); barrier(); vfp_vector = vfp_null_entry; -- cgit v1.2.3-70-g09d2 From f2740e45ae59d76ce4303d83824d3625b23334e5 Mon Sep 17 00:00:00 2001 From: "aherrman@arcor.de" Date: Tue, 11 Sep 2007 20:22:28 +0200 Subject: radeonfb: fix setting of PPLL_REF_DIV for RV370 5B60. As observed with various Radeon X300 cards console goes blank without that fix. Acked-by: Benjamin Herrenschmidt Signed-off-by: Andreas Herrmann Signed-off-by: Linus Torvalds --- drivers/video/aty/radeon_base.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 47ca62fe7c3..5a8af4da4ce 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -1285,7 +1285,8 @@ static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_reg if (rinfo->family == CHIP_FAMILY_R300 || rinfo->family == CHIP_FAMILY_RS300 || rinfo->family == CHIP_FAMILY_R350 || - rinfo->family == CHIP_FAMILY_RV350) { + rinfo->family == CHIP_FAMILY_RV350 || + rinfo->family == CHIP_FAMILY_RV380 ) { if (mode->ppll_ref_div & R300_PPLL_REF_DIV_ACC_MASK) { /* When restoring console mode, use saved PPLL_REF_DIV * setting. -- cgit v1.2.3-70-g09d2 From 106c4a9cef3671b0a251e64c8f6fb7f1a4d801c6 Mon Sep 17 00:00:00 2001 From: "aherrman@arcor.de" Date: Tue, 11 Sep 2007 20:37:37 +0200 Subject: radeonfb: fix chip definition for Radeon Xpress 200M 0x5975 This fixes a problem introduced with commit b5f2f4d1a6d7efde39cfb5e1d034981c69f2214c The commit added a wrong chip definition to radeonfb which causes a blank console on my Laptop if radeonfb is loaded. The patch - renames PCI_CHIP_RS485_5975 to PCI_CHIP_RS482_5975 - corrects the chip family (RS480 instead of R300) for 0x5975 - ensures that PCI IDs are in ascending order in ati_ids.h Signed-off-by: Andreas Herrmann Tentatively-acked-by: Ben Herrenschmidt Signed-off-by: Linus Torvalds --- drivers/video/aty/ati_ids.h | 12 ++++++------ drivers/video/aty/radeon_base.c | 3 +-- 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/video/aty/ati_ids.h b/drivers/video/aty/ati_ids.h index 685a754991c..dca2eb8f2dd 100644 --- a/drivers/video/aty/ati_ids.h +++ b/drivers/video/aty/ati_ids.h @@ -192,6 +192,12 @@ #define PCI_CHIP_RS300_5835 0x5835 #define PCI_CHIP_RS300_5836 0x5836 #define PCI_CHIP_RS300_5837 0x5837 +#define PCI_CHIP_RS480_5955 0x5955 +#define PCI_CHIP_RV280_5960 0x5960 +#define PCI_CHIP_RV280_5961 0x5961 +#define PCI_CHIP_RV280_5962 0x5962 +#define PCI_CHIP_RV280_5964 0x5964 +#define PCI_CHIP_RS482_5975 0x5975 #define PCI_CHIP_RV370_5B60 0x5B60 #define PCI_CHIP_RV370_5B61 0x5B61 #define PCI_CHIP_RV370_5B62 0x5B62 @@ -200,14 +206,8 @@ #define PCI_CHIP_RV370_5B65 0x5B65 #define PCI_CHIP_RV370_5B66 0x5B66 #define PCI_CHIP_RV370_5B67 0x5B67 -#define PCI_CHIP_RV280_5960 0x5960 -#define PCI_CHIP_RV280_5961 0x5961 -#define PCI_CHIP_RV280_5962 0x5962 -#define PCI_CHIP_RV280_5964 0x5964 -#define PCI_CHIP_RS485_5975 0x5975 #define PCI_CHIP_RV280_5C61 0x5C61 #define PCI_CHIP_RV280_5C63 0x5C63 #define PCI_CHIP_R423_5D57 0x5D57 #define PCI_CHIP_RS350_7834 0x7834 #define PCI_CHIP_RS350_7835 0x7835 -#define PCI_CHIP_RS480_5955 0x5955 diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 5a8af4da4ce..4b747bdaeea 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -102,6 +102,7 @@ static struct pci_device_id radeonfb_pci_table[] = { /* Radeon Xpress 200m */ CHIP_DEF(PCI_CHIP_RS480_5955, RS480, CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY), + CHIP_DEF(PCI_CHIP_RS482_5975, RS480, CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY), /* Mobility M6 */ CHIP_DEF(PCI_CHIP_RADEON_LY, RV100, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), CHIP_DEF(PCI_CHIP_RADEON_LZ, RV100, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), @@ -153,8 +154,6 @@ static struct pci_device_id radeonfb_pci_table[] = { /* Mobility 9200 (M9+) */ CHIP_DEF(PCI_CHIP_RV280_5C61, RV280, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), CHIP_DEF(PCI_CHIP_RV280_5C63, RV280, CHIP_HAS_CRTC2 | CHIP_IS_MOBILITY), - /*Mobility Xpress 200 */ - CHIP_DEF(PCI_CHIP_RS485_5975, R300, CHIP_HAS_CRTC2 | CHIP_IS_IGP | CHIP_IS_MOBILITY), /* 9200 */ CHIP_DEF(PCI_CHIP_RV280_5960, RV280, CHIP_HAS_CRTC2), CHIP_DEF(PCI_CHIP_RV280_5961, RV280, CHIP_HAS_CRTC2), -- cgit v1.2.3-70-g09d2 From 9ca2152e173554e7ffb7919dc4916a7c61f8be1a Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 13 Sep 2007 12:19:46 +0200 Subject: Fix this Paul Simon song's name Signed-off-by: Jean Delvare Signed-off-by: Linus Torvalds --- Documentation/ManagementStyle | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/ManagementStyle b/Documentation/ManagementStyle index cbbebfb51ff..49a8efa5afe 100644 --- a/Documentation/ManagementStyle +++ b/Documentation/ManagementStyle @@ -166,7 +166,7 @@ To solve this problem, you really only have two options: The option of being unfailingly polite really doesn't exist. Nobody will trust somebody who is so clearly hiding his true character. -(*) Paul Simon sang "Fifty Ways to Lose Your Lover", because quite +(*) Paul Simon sang "Fifty Ways to Leave Your Lover", because quite frankly, "A Million Ways to Tell a Developer He Is a D*ckhead" doesn't scan nearly as well. But I'm sure he thought about it. -- cgit v1.2.3-70-g09d2 From f3da54ba140c6427fa4a32913e1bf406f41b5dda Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 13 Sep 2007 14:26:53 +0200 Subject: Fix race with shared tag queue maps There's a race condition in blk_queue_end_tag() for shared tag maps, users include stex (promise supertrak thingy) and qla2xxx. The former at least has reported bugs in this area, not sure why we haven't seen any for the latter. It could be because the window is narrow and that other conditions in the qla2xxx code hide this. It's a real bug, though, as the stex smp users can attest. We need to ensure two things - the tag bit clearing needs to happen AFTER we cleared the tag pointer, as the tag bit clearing/setting is what protects this map. Secondly, we need to ensure that the visibility of the tag pointer and tag bit clear are ordered properly. [ I removed the SMP barriers - "test_and_clear_bit()" already implies all the required barriers. -- Linus ] Also see http://bugzilla.kernel.org/show_bug.cgi?id=7842 Signed-off-by: Jens Axboe Signed-off-by: Linus Torvalds --- block/ll_rw_blk.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index a15845c164f..cd20367061d 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -1075,12 +1075,6 @@ void blk_queue_end_tag(struct request_queue *q, struct request *rq) */ return; - if (unlikely(!__test_and_clear_bit(tag, bqt->tag_map))) { - printk(KERN_ERR "%s: attempt to clear non-busy tag (%d)\n", - __FUNCTION__, tag); - return; - } - list_del_init(&rq->queuelist); rq->cmd_flags &= ~REQ_QUEUED; rq->tag = -1; @@ -1090,6 +1084,13 @@ void blk_queue_end_tag(struct request_queue *q, struct request *rq) __FUNCTION__, tag); bqt->tag_index[tag] = NULL; + + if (unlikely(!test_and_clear_bit(tag, bqt->tag_map))) { + printk(KERN_ERR "%s: attempt to clear non-busy tag (%d)\n", + __FUNCTION__, tag); + return; + } + bqt->busy--; } -- cgit v1.2.3-70-g09d2 From 5614b02143171a99e0e6eb6c7d1d2f8750d2957f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 23 Aug 2007 17:48:41 -0300 Subject: V4L/DVB (6095): ivtv: fix VIDIOC_G_ENC_INDEX flag handling Due to a documentation bug (the type mask is 3 bits long, not 2) the wrong frame types were filled in: the B and P frame types were swapped. This bug also hid a second bug: when a capture is stopped a last entry is written into the pgm index buffer with internal type 0, denoting the end of the program. This entry wasn't ignored, instead it was accidentally returned to the caller as a P frame. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/cx2341x/fw-encoder-api.txt | 4 +++- drivers/media/video/ivtv/ivtv-fileops.c | 6 ++++-- drivers/media/video/ivtv/ivtv-ioctl.c | 17 ++++++++++++----- 3 files changed, 19 insertions(+), 8 deletions(-) diff --git a/Documentation/video4linux/cx2341x/fw-encoder-api.txt b/Documentation/video4linux/cx2341x/fw-encoder-api.txt index 5dd3109a8b3..5a27af2ee1c 100644 --- a/Documentation/video4linux/cx2341x/fw-encoder-api.txt +++ b/Documentation/video4linux/cx2341x/fw-encoder-api.txt @@ -407,8 +407,10 @@ Description u32 length; // Length of this frame u32 offset_low; // Offset in the file of the u32 offset_high; // start of this frame - u32 mask1; // Bits 0-1 are the type mask: + u32 mask1; // Bits 0-2 are the type mask: // 1=I, 2=P, 4=B + // 0=End of Program Index, other fields + // are invalid. u32 pts; // The PTS of the frame u32 mask2; // Bit 0 is bit 32 of the pts. }; diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index 5dd519caf81..0285c4a830e 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -190,7 +190,9 @@ static void ivtv_update_pgm_info(struct ivtv *itv) int idx = (itv->pgm_info_write_idx + i) % itv->pgm_info_num; struct v4l2_enc_idx_entry *e = itv->pgm_info + idx; u32 addr = itv->pgm_info_offset + 4 + idx * 24; - const int mapping[] = { V4L2_ENC_IDX_FRAME_P, V4L2_ENC_IDX_FRAME_I, V4L2_ENC_IDX_FRAME_B, 0 }; + const int mapping[8] = { -1, V4L2_ENC_IDX_FRAME_I, V4L2_ENC_IDX_FRAME_P, -1, + V4L2_ENC_IDX_FRAME_B, -1, -1, -1 }; + // 1=I, 2=P, 4=B e->offset = read_enc(addr + 4) + ((u64)read_enc(addr + 8) << 32); if (e->offset > itv->mpg_data_received) { @@ -199,7 +201,7 @@ static void ivtv_update_pgm_info(struct ivtv *itv) e->offset += itv->vbi_data_inserted; e->length = read_enc(addr); e->pts = read_enc(addr + 16) + ((u64)(read_enc(addr + 20) & 1) << 32); - e->flags = mapping[read_enc(addr + 12) & 3]; + e->flags = mapping[read_enc(addr + 12) & 7]; i++; } itv->pgm_info_write_idx = (itv->pgm_info_write_idx + i) % itv->pgm_info_num; diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 5977a79619c..dfe0aedc60f 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -1099,14 +1099,21 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void case VIDIOC_G_ENC_INDEX: { struct v4l2_enc_idx *idx = arg; + struct v4l2_enc_idx_entry *e = idx->entry; + int entries; int i; - idx->entries = (itv->pgm_info_write_idx + IVTV_MAX_PGM_INDEX - itv->pgm_info_read_idx) % + entries = (itv->pgm_info_write_idx + IVTV_MAX_PGM_INDEX - itv->pgm_info_read_idx) % IVTV_MAX_PGM_INDEX; - if (idx->entries > V4L2_ENC_IDX_ENTRIES) - idx->entries = V4L2_ENC_IDX_ENTRIES; - for (i = 0; i < idx->entries; i++) { - idx->entry[i] = itv->pgm_info[(itv->pgm_info_read_idx + i) % IVTV_MAX_PGM_INDEX]; + if (entries > V4L2_ENC_IDX_ENTRIES) + entries = V4L2_ENC_IDX_ENTRIES; + idx->entries = 0; + for (i = 0; i < entries; i++) { + *e = itv->pgm_info[(itv->pgm_info_read_idx + i) % IVTV_MAX_PGM_INDEX]; + if ((e->flags & V4L2_ENC_IDX_FRAME_MASK) <= V4L2_ENC_IDX_FRAME_B) { + idx->entries++; + e++; + } } itv->pgm_info_read_idx = (itv->pgm_info_read_idx + idx->entries) % IVTV_MAX_PGM_INDEX; break; -- cgit v1.2.3-70-g09d2 From f5e4feead773cb449212eacfa254a238a953d4d5 Mon Sep 17 00:00:00 2001 From: Stas Sergeev Date: Sun, 2 Sep 2007 03:56:18 -0300 Subject: V4L/DVB (6144): Fix mux setup for composite sound on AverTV 307 Right now the composite sound input doesn't work on AverTV 307 because of the wrong mux setup. The composite sound is routed via an external 4channel multiplexer controlled by GPIO, while the code assumes an internal multiplexer instead. Presumably this was a copy/paste error, and noone have ever tested the functionality. With the attached patch it works properly, which gives me an ability to finally watch the cable TV under linux. Signed-off-by: Stas Sergeev Signed-off-by: Andrew Morton Acked-by: Nickolay V. Shmyrev Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-cards.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 8ec83bd7009..25ec1681081 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -1537,18 +1537,18 @@ struct saa7134_board saa7134_boards[] = { },{ .name = name_comp1, .vmux = 0, - .amux = LINE2, - .gpio = 0x00, + .amux = LINE1, + .gpio = 0x02, },{ .name = name_comp2, .vmux = 3, - .amux = LINE2, - .gpio = 0x00, + .amux = LINE1, + .gpio = 0x02, },{ .name = name_svideo, .vmux = 8, - .amux = LINE2, - .gpio = 0x00, + .amux = LINE1, + .gpio = 0x02, }}, .radio = { .name = name_radio, -- cgit v1.2.3-70-g09d2 From 7b9fbc3e30f785412a26819aa4daf0b6c27f6c53 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 3 Sep 2007 11:51:51 -0300 Subject: V4L/DVB (6147): Pwc: Fix a broken debug message Commit 85237f202d46d55c1bffe0c5b1aa3ddc0f1dce4d introduced the following warning (with CONFIG_USB_PWC_DEBUG=y): drivers/media/video/pwc/pwc-if.c: In function "pwc_video_close": drivers/media/video/pwc/pwc-if.c:1211: warning: "i" may be used uninitialized in this function This is true, and can cause a broken debug message to be logged. Here's a fix. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pwc/pwc-if.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 3d81966d8c4..931b274bffc 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -1243,7 +1243,7 @@ static int pwc_video_close(struct inode *inode, struct file *file) PWC_ERROR("Failed to power down camera (%d)\n", i); } pdev->vopen--; - PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", i); + PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", pdev->vopen); } else { pwc_cleanup(pdev); /* Free memory (don't set pdev to 0 just yet) */ -- cgit v1.2.3-70-g09d2 From f5ab272bbff2a37d6d8f84328b6d25d0cdbda605 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 3 Sep 2007 12:01:51 -0300 Subject: V4L/DVB (6148): Fix a warning at saa7191_probe saa7191.c: In function 'saa7191_probe': saa7191.c:596: warning: passing argument 3 of 'saa7191_write_block' discards qualifiers from pointer target type Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7191.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/saa7191.c b/drivers/media/video/saa7191.c index 8615a6081a5..b4018cce328 100644 --- a/drivers/media/video/saa7191.c +++ b/drivers/media/video/saa7191.c @@ -130,7 +130,7 @@ static int saa7191_write_reg(struct i2c_client *client, u8 reg, /* the first byte of data must be the first subaddress number (register) */ static int saa7191_write_block(struct i2c_client *client, - u8 length, u8 *data) + u8 length, const u8 *data) { int i; int ret; @@ -592,7 +592,7 @@ static int saa7191_attach(struct i2c_adapter *adap, int addr, int kind) if (err) goto out_free_decoder; - err = saa7191_write_block(client, sizeof(initseq), (u8 *)initseq); + err = saa7191_write_block(client, sizeof(initseq), initseq); if (err) { printk(KERN_ERR "SAA7191 initialization failed\n"); goto out_detach_client; -- cgit v1.2.3-70-g09d2 From 4730d3af625b532e3df5f091b5c8edb08f512fbf Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Mon, 3 Sep 2007 09:35:04 -0300 Subject: V4L/DVB (6173a): Documentation: Remove reference to dead "cpia_pp=" boot-time option Since this boot-time option was removed in commit 9ab7e323af9f9efad3e20a14faa4d947adfac381, delete the reference to it. Signed-off-by: Robert P. J. Day Signed-off-by: Mauro Carvalho Chehab --- Documentation/kernel-parameters.txt | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b41cde31d11..586b6f85d4e 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1,5 +1,5 @@ - Kernel Parameters - ~~~~~~~~~~~~~~~~~ + Kernel Parameters + ~~~~~~~~~~~~~~~~~ The following is a consolidated list of the kernel parameters as implemented (mostly) by the __setup() macro and sorted into English Dictionary order @@ -468,9 +468,6 @@ and is between 256 and 4096 characters. It is defined in the file Format: ,,,[,] - cpia_pp= [HW,PPT] - Format: { parport | auto | none } - crashkernel=nn[KMG]@ss[KMG] [KNL] Reserve a chunk of physical memory to hold a kernel to switch to with kexec on panic. @@ -1465,7 +1462,7 @@ and is between 256 and 4096 characters. It is defined in the file reboot= [BUGS=X86-32,BUGS=ARM,BUGS=IA-64] Rebooting mode Format: [,[,...]] - See arch/*/kernel/reboot.c or arch/*/kernel/process.c + See arch/*/kernel/reboot.c or arch/*/kernel/process.c reserve= [KNL,BUGS] Force the kernel to ignore some iomem area @@ -1553,12 +1550,12 @@ and is between 256 and 4096 characters. It is defined in the file selinux_compat_net = [SELINUX] Set initial selinux_compat_net flag value. - Format: { "0" | "1" } - 0 -- use new secmark-based packet controls - 1 -- use legacy packet controls - Default value is 0 (preferred). - Value can be changed at runtime via - /selinux/compat_net. + Format: { "0" | "1" } + 0 -- use new secmark-based packet controls + 1 -- use legacy packet controls + Default value is 0 (preferred). + Value can be changed at runtime via + /selinux/compat_net. serialnumber [BUGS=X86-32] @@ -1957,7 +1954,7 @@ and is between 256 and 4096 characters. It is defined in the file norandmaps Don't use address space randomization Equivalent to echo 0 > /proc/sys/kernel/randomize_va_space - unwind_debug=N N > 0 will enable dwarf2 unwinder debugging + unwind_debug=N N > 0 will enable dwarf2 unwinder debugging This is useful to get more information why you got a "dwarf2 unwinder stuck" -- cgit v1.2.3-70-g09d2 From 48200baeab95fd39a7f4c4f3536c7142a64ac335 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Thu, 6 Sep 2007 22:48:35 -0300 Subject: V4L/DVB (6188): Avoid a NULL pointer dereference during mpeg_open() Bug: With a hardware encoder board installed as cx88[1] and a non-encoder boards installed as cx88[0], an OOPS is generated during cx8802_get_device() called from mpeg_open(). Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-mpeg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index 317a2a3f9cc..da7a6b591a6 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -580,7 +580,7 @@ struct cx8802_dev * cx8802_get_device(struct inode *inode) list_for_each(list,&cx8802_devlist) { h = list_entry(list, struct cx8802_dev, devlist); - if (h->mpeg_dev->minor == minor) + if (h->mpeg_dev && h->mpeg_dev->minor == minor) return h; } -- cgit v1.2.3-70-g09d2 From e90ff9239e7636a191a8998a70cea220a2c58cdf Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 13 Sep 2007 21:09:01 -0300 Subject: V4L/DVB (6220a): fix build error for et61x251 driver Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-dev.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index d62847f846c..17f8f3a2f0a 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -337,6 +337,9 @@ void *priv; struct class_device class_dev; /* sysfs */ }; +/* Class-dev to video-device */ +#define to_video_device(cd) container_of(cd, struct video_device, class_dev) + /* Version 2 functions */ extern int video_register_device(struct video_device *vfd, int type, int nr); void video_unregister_device(struct video_device *); @@ -354,11 +357,9 @@ extern int video_usercopy(struct inode *inode, struct file *file, int (*func)(struct inode *inode, struct file *file, unsigned int cmd, void *arg)); - #ifdef CONFIG_VIDEO_V4L1_COMPAT #include -#define to_video_device(cd) container_of(cd, struct video_device, class_dev) static inline int __must_check video_device_create_file(struct video_device *vfd, struct class_device_attribute *attr) -- cgit v1.2.3-70-g09d2 From e606c109c485c6f8e27dd6ddcd2c0b58c96fc5c9 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 12 Sep 2007 16:31:12 +0100 Subject: [MIPS] rtlx: fix int vs. long bug. CC arch/mips/kernel/rtlx.o arch/mips/kernel/rtlx.c: In function 'rtlx_init': arch/mips/kernel/rtlx.c:114: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'long unsigned int' Signed-off-by: Ralf Baechle --- arch/mips/kernel/rtlx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index aab89e97abb..04d8ee787f7 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -111,7 +111,7 @@ static void __used dump_rtlx(void) static int rtlx_init(struct rtlx_info *rtlxi) { if (rtlxi->id != RTLX_ID) { - printk(KERN_ERR "no valid RTLX id at 0x%p 0x%x\n", rtlxi, rtlxi->id); + printk(KERN_ERR "no valid RTLX id at 0x%p 0x%lx\n", rtlxi, rtlxi->id); return -ENOEXEC; } -- cgit v1.2.3-70-g09d2 From 4d24c8f955b8c9d51c5fe7299c898527e94d39ad Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 12 Sep 2007 16:32:54 +0100 Subject: [MIPS] rtlx: Fix build error. CC arch/mips/kernel/rtlx.o cc1: warnings being treated as errors arch/mips/kernel/rtlx.c:59: warning: 'irq' defined but not used arch/mips/kernel/rtlx.c:60: warning: 'irq_num' defined but not used Signed-off-by: Ralf Baechle --- arch/mips/kernel/rtlx.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 04d8ee787f7..1ba00c15505 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -56,8 +56,6 @@ static struct chan_waitqueues { struct mutex mutex; } channel_wqs[RTLX_CHANNELS]; -static struct irqaction irq; -static int irq_num; static struct vpe_notifications notify; static int sp_stopping = 0; -- cgit v1.2.3-70-g09d2 From 82411390a2eb532a2c54026d39ab6beb83ff838c Mon Sep 17 00:00:00 2001 From: Johannes Dickgreber Date: Wed, 12 Sep 2007 18:22:04 +0200 Subject: [MIPS] N32 needs to use compat_sys_futimesat Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall64-n32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 53d7a977193..118be24224f 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -375,7 +375,7 @@ EXPORT(sysn32_call_table) PTR sys_mkdirat PTR sys_mknodat PTR sys_fchownat - PTR sys_futimesat /* 6255 */ + PTR compat_sys_futimesat /* 6255 */ PTR sys_newfstatat PTR sys_unlinkat PTR sys_renameat -- cgit v1.2.3-70-g09d2 From b1043cc7d9d7a7dec8d807570c067e0c90b94b57 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 13 Sep 2007 13:13:28 +0900 Subject: [MIPS] Add #include to arch/mips/kernel/time.c It refer to CPU_PROFILING. arch/mips/kernel/time.c: In function 'local_timer_interrupt': arch/mips/kernel/time.c:142: error: implicit declaration of function 'profile_tick' arch/mips/kernel/time.c:142: error: 'CPU_PROFILING' undeclared (first use in this function) arch/mips/kernel/time.c:142: error: (Each undeclared identifier is reported only once arch/mips/kernel/time.c:142: error: for each function it appears in.) Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/kernel/time.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index d48d1d5bea0..9a5596bf857 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 6440fcfc62767028a2bbdf742549d24f6a023004 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 4 Sep 2007 23:02:02 +0900 Subject: [MIPS] No ide_default_io_base() if PCI IDE was not found Revert b5438582090406e2ccb4169d9b2df7c9939ae42b and add no_pci_devices() check to avoid crash due to early calling of pci_get_class(). Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- include/asm-mips/mach-generic/ide.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/include/asm-mips/mach-generic/ide.h b/include/asm-mips/mach-generic/ide.h index 2b928577be5..a77128362a7 100644 --- a/include/asm-mips/mach-generic/ide.h +++ b/include/asm-mips/mach-generic/ide.h @@ -29,6 +29,35 @@ #define IDE_ARCH_OBSOLETE_DEFAULTS +static __inline__ int ide_probe_legacy(void) +{ +#ifdef CONFIG_PCI + struct pci_dev *dev; + /* + * This can be called on the ide_setup() path, super-early in + * boot. But the down_read() will enable local interrupts, + * which can cause some machines to crash. So here we detect + * and flag that situation and bail out early. + */ + if (no_pci_devices()) + return 0; + dev = pci_get_class(PCI_CLASS_BRIDGE_EISA << 8, NULL); + if (dev) + goto found; + dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL); + if (dev) + goto found; + return 0; +found: + pci_dev_put(dev); + return 1; +#elif defined(CONFIG_EISA) || defined(CONFIG_ISA) + return 1; +#else + return 0; +#endif +} + static __inline__ int ide_default_irq(unsigned long base) { switch (base) { @@ -45,6 +74,8 @@ static __inline__ int ide_default_irq(unsigned long base) static __inline__ unsigned long ide_default_io_base(int index) { + if (!ide_probe_legacy()) + return 0; /* * If PCI is present then it is not safe to poke around * the other legacy IDE ports. Only 0x1f0 and 0x170 are -- cgit v1.2.3-70-g09d2 From 48d480b0bde794781fcae9501fb043c1bac0e523 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 13 Sep 2007 17:36:22 +0100 Subject: [MIPS] Malta: Fix off by one bug in interrupt handler. Fairly cosmetic as it would only affect VSMP / SMTC kernels that don't use vectored interrupts. Found by Beth. Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/malta/malta_int.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index 97aeb8c4e60..b73f21823c5 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -256,7 +256,7 @@ asmlinkage void plat_irq_dispatch(void) if (irq == MIPSCPU_INT_I8259A) malta_hw0_irqdispatch(); - else if (irq > 0) + else if (irq >= 0) do_IRQ(MIPS_CPU_IRQ_BASE + irq); else spurious_interrupt(); -- cgit v1.2.3-70-g09d2 From 8df5beac2aa15b18a912ab585e1b86e748eda9ad Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 23 Aug 2006 14:26:50 +0100 Subject: [MIPS] Workaround for 4Kc machine check exception Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle --- arch/mips/mm/tlbex.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 9cb39644b6f..6c425b05244 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -57,6 +57,21 @@ static __init int __maybe_unused r10000_llsc_war(void) return R10000_LLSC_WAR; } +/* + * Found by experiment: At least some revisions of the 4kc throw under + * some circumstances a machine check exception, triggered by invalid + * values in the index register. Delaying the tlbp instruction until + * after the next branch, plus adding an additional nop in front of + * tlbwi/tlbwr avoids the invalid index register values. Nobody knows + * why; it's not an issue caused by the core RTL. + * + */ +static __init int __attribute__((unused)) m4kc_tlbp_war(void) +{ + return (current_cpu_data.processor_id & 0xffff00) == + (PRID_COMP_MIPS | PRID_IMP_4KC); +} + /* * A little micro-assembler, intended for TLB refill handler * synthesizing. It is intentionally kept simple, does only support @@ -894,6 +909,8 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l, case CPU_20KC: case CPU_25KF: case CPU_LOONGSON2: + if (m4kc_tlbp_war()) + i_nop(p); tlbw(p); break; @@ -1705,7 +1722,8 @@ build_r4000_tlbchange_handler_head(u32 **p, struct label **l, l_smp_pgtable_change(l, *p); # endif iPTE_LW(p, l, pte, ptr); /* get even pte */ - build_tlb_probe_entry(p); + if (!m4kc_tlbp_war()) + build_tlb_probe_entry(p); } static void __init @@ -1747,6 +1765,8 @@ static void __init build_r4000_tlb_load_handler(void) build_r4000_tlbchange_handler_head(&p, &l, &r, K0, K1); build_pte_present(&p, &l, &r, K0, K1, label_nopage_tlbl); + if (m4kc_tlbp_war()) + build_tlb_probe_entry(&p); build_make_valid(&p, &r, K0, K1); build_r4000_tlbchange_handler_tail(&p, &l, &r, K0, K1); @@ -1781,6 +1801,8 @@ static void __init build_r4000_tlb_store_handler(void) build_r4000_tlbchange_handler_head(&p, &l, &r, K0, K1); build_pte_writable(&p, &l, &r, K0, K1, label_nopage_tlbs); + if (m4kc_tlbp_war()) + build_tlb_probe_entry(&p); build_make_write(&p, &r, K0, K1); build_r4000_tlbchange_handler_tail(&p, &l, &r, K0, K1); @@ -1815,6 +1837,8 @@ static void __init build_r4000_tlb_modify_handler(void) build_r4000_tlbchange_handler_head(&p, &l, &r, K0, K1); build_pte_modifiable(&p, &l, &r, K0, K1, label_nopage_tlbm); + if (m4kc_tlbp_war()) + build_tlb_probe_entry(&p); /* Present and writable bits set, set accessed and dirty bits. */ build_make_write(&p, &r, K0, K1); build_r4000_tlbchange_handler_tail(&p, &l, &r, K0, K1); -- cgit v1.2.3-70-g09d2 From 50da469a79fa2152d824f25f5ad5962f4af4343d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 14 Sep 2007 19:08:43 +0100 Subject: [MIPS] 20Kc: Disable use of WAIT instruction. Another issue with 20Kc's WAIT, waiting for more details. With the 2.6.23 release immindent simply disable the use of WAIT instead of a more fancy workaround. Signed-off-by: Ralf Baechle --- arch/mips/kernel/cpu-probe.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 06448a9656d..3e004161ebd 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -199,7 +199,14 @@ static inline void check_wait(void) if ((c->processor_id & 0xff) <= 0x64) break; - cpu_wait = r4k_wait; + /* + * Another rev is incremeting c0_count at a reduced clock + * rate while in WAIT mode. So we basically have the choice + * between using the cp0 timer as clocksource or avoiding + * the WAIT instruction. Until more details are known, + * disable the use of WAIT for 20Kc entirely. + cpu_wait = r4k_wait; + */ break; case CPU_RM9000: if ((c->processor_id & 0x00ff) >= 0x40) -- cgit v1.2.3-70-g09d2 From 3f7086978fc0193eff24a77d8b57ac4debc088fa Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 4 Sep 2007 14:14:20 -0500 Subject: [PATCH] bcm43xx: Fix cancellation of work queue crashes A crash upon booting that is caused by bcm43xx has been reported [1] and found to be due to a work queue being reinitialized while work on that queue is still pending. This fix modifies the shutdown of work queues and prevents periodic work from being requeued during shutdown. With this patch, no more crashes on reboot were observed by the original reporter. I do not get that particular failure on my system; however, when running a large number of ifdown/ifup sequences, my system would kernel panic with the 'caps lock' light blinking at roughly a 1 Hz rate. In addition, there were infrequent failures in the firmware that resulted in 'IRQ READY TIMEOUT' errors. With this patch, no more of the first type of failure occur, and incidence of the second type is greatly reduced. [1] http://bugzilla.kernel.org/show_bug.cgi?id=8937 Signed-off-by: Larry Finger Acked-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/bcm43xx/bcm43xx_main.c | 28 ++++++++++++++++++++-------- drivers/net/wireless/bcm43xx/bcm43xx_main.h | 2 +- drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c | 2 +- 3 files changed, 22 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index c5d6753a55e..dfbd01eaaf3 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -3183,6 +3183,9 @@ static void bcm43xx_periodic_work_handler(struct work_struct *work) unsigned long orig_trans_start = 0; mutex_lock(&bcm->mutex); + /* keep from doing and rearming periodic work if shutting down */ + if (bcm43xx_status(bcm) == BCM43xx_STAT_UNINIT) + goto unlock_mutex; if (unlikely(bcm->periodic_state % 60 == 0)) { /* Periodic work will take a long time, so we want it to * be preemtible. @@ -3228,14 +3231,10 @@ static void bcm43xx_periodic_work_handler(struct work_struct *work) mmiowb(); bcm->periodic_state++; spin_unlock_irqrestore(&bcm->irq_lock, flags); +unlock_mutex: mutex_unlock(&bcm->mutex); } -void bcm43xx_periodic_tasks_delete(struct bcm43xx_private *bcm) -{ - cancel_rearming_delayed_work(&bcm->periodic_work); -} - void bcm43xx_periodic_tasks_setup(struct bcm43xx_private *bcm) { struct delayed_work *work = &bcm->periodic_work; @@ -3285,6 +3284,14 @@ static int bcm43xx_rng_init(struct bcm43xx_private *bcm) return err; } +void bcm43xx_cancel_work(struct bcm43xx_private *bcm) +{ + /* The system must be unlocked when this routine is entered. + * If not, the next 2 steps may deadlock */ + cancel_work_sync(&bcm->restart_work); + cancel_delayed_work_sync(&bcm->periodic_work); +} + static int bcm43xx_shutdown_all_wireless_cores(struct bcm43xx_private *bcm) { int ret = 0; @@ -3321,7 +3328,12 @@ static void bcm43xx_free_board(struct bcm43xx_private *bcm) { bcm43xx_rng_exit(bcm); bcm43xx_sysfs_unregister(bcm); - bcm43xx_periodic_tasks_delete(bcm); + + mutex_lock(&(bcm)->mutex); + bcm43xx_set_status(bcm, BCM43xx_STAT_UNINIT); + mutex_unlock(&(bcm)->mutex); + + bcm43xx_cancel_work(bcm); mutex_lock(&(bcm)->mutex); bcm43xx_shutdown_all_wireless_cores(bcm); @@ -4016,7 +4028,7 @@ static int bcm43xx_net_stop(struct net_device *net_dev) err = bcm43xx_disable_interrupts_sync(bcm); assert(!err); bcm43xx_free_board(bcm); - flush_scheduled_work(); + bcm43xx_cancel_work(bcm); return 0; } @@ -4148,9 +4160,9 @@ static void bcm43xx_chip_reset(struct work_struct *work) struct bcm43xx_phyinfo *phy; int err = -ENODEV; + bcm43xx_cancel_work(bcm); mutex_lock(&(bcm)->mutex); if (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED) { - bcm43xx_periodic_tasks_delete(bcm); phy = bcm43xx_current_phy(bcm); err = bcm43xx_select_wireless_core(bcm, phy->type); if (!err) diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.h b/drivers/net/wireless/bcm43xx/bcm43xx_main.h index c8f3c532bab..14cfbeb582e 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.h @@ -122,7 +122,7 @@ void bcm43xx_wireless_core_reset(struct bcm43xx_private *bcm, int connect_phy); void bcm43xx_mac_suspend(struct bcm43xx_private *bcm); void bcm43xx_mac_enable(struct bcm43xx_private *bcm); -void bcm43xx_periodic_tasks_delete(struct bcm43xx_private *bcm); +void bcm43xx_cancel_work(struct bcm43xx_private *bcm); void bcm43xx_periodic_tasks_setup(struct bcm43xx_private *bcm); void bcm43xx_controller_restart(struct bcm43xx_private *bcm, const char *reason); diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c index c71b998a369..8ab5f93d192 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c @@ -327,7 +327,7 @@ static ssize_t bcm43xx_attr_phymode_store(struct device *dev, goto out; } - bcm43xx_periodic_tasks_delete(bcm); + bcm43xx_cancel_work(bcm); mutex_lock(&(bcm)->mutex); err = bcm43xx_select_wireless_core(bcm, phytype); if (!err) -- cgit v1.2.3-70-g09d2 From 53c5725581cce8a29925afd4eae71fa8c7ce551f Mon Sep 17 00:00:00 2001 From: Masakazu Mokuno Date: Fri, 14 Sep 2007 14:35:38 -0400 Subject: As struct iw_point is bi-directional payload, we should copy back the content on return from ioctl calls Signed-off-by: Masakazu Mokuno Signed-off-by: John W. Linville --- fs/compat_ioctl.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index a6c9078af12..5a5b7116cef 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -2311,8 +2311,10 @@ static int do_wireless_ioctl(unsigned int fd, unsigned int cmd, unsigned long ar struct iwreq __user *iwr_u; struct iw_point __user *iwp; struct compat_iw_point __user *iwp_u; - compat_caddr_t pointer; + compat_caddr_t pointer_u; + void __user *pointer; __u16 length, flags; + int ret; iwr_u = compat_ptr(arg); iwp_u = (struct compat_iw_point __user *) &iwr_u->u.data; @@ -2330,17 +2332,29 @@ static int do_wireless_ioctl(unsigned int fd, unsigned int cmd, unsigned long ar sizeof(iwr->ifr_ifrn.ifrn_name))) return -EFAULT; - if (__get_user(pointer, &iwp_u->pointer) || + if (__get_user(pointer_u, &iwp_u->pointer) || __get_user(length, &iwp_u->length) || __get_user(flags, &iwp_u->flags)) return -EFAULT; - if (__put_user(compat_ptr(pointer), &iwp->pointer) || + if (__put_user(compat_ptr(pointer_u), &iwp->pointer) || __put_user(length, &iwp->length) || __put_user(flags, &iwp->flags)) return -EFAULT; - return sys_ioctl(fd, cmd, (unsigned long) iwr); + ret = sys_ioctl(fd, cmd, (unsigned long) iwr); + + if (__get_user(pointer, &iwp->pointer) || + __get_user(length, &iwp->length) || + __get_user(flags, &iwp->flags)) + return -EFAULT; + + if (__put_user(ptr_to_compat(pointer), &iwp_u->pointer) || + __put_user(length, &iwp_u->length) || + __put_user(flags, &iwp_u->flags)) + return -EFAULT; + + return ret; } /* Since old style bridge ioctl's endup using SIOCDEVPRIVATE -- cgit v1.2.3-70-g09d2 From dd941252a81b02b5915e2db160fe02c972875846 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 14 Sep 2007 08:41:12 +0200 Subject: shared tag queue barrier comment Should add some comments for the tag barriers (they won't be so important if we can switch over to the explicit _lock bitops, but for now we should make it clear). Jens' original patch said a barrier after the test_and_clear_bit was also required. I can't see why (and it would prevent the use of the _lock bitop). Acked-by: Jens Axboe Signed-off-by: Linus Torvalds -- --- block/ll_rw_blk.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c index cd20367061d..ed39313c408 100644 --- a/block/ll_rw_blk.c +++ b/block/ll_rw_blk.c @@ -1085,6 +1085,12 @@ void blk_queue_end_tag(struct request_queue *q, struct request *rq) bqt->tag_index[tag] = NULL; + /* + * We use test_and_clear_bit's memory ordering properties here. + * The tag_map bit acts as a lock for tag_index[bit], so we need + * a barrer before clearing the bit (precisely: release semantics). + * Could use clear_bit_unlock when it is merged. + */ if (unlikely(!test_and_clear_bit(tag, bqt->tag_map))) { printk(KERN_ERR "%s: attempt to clear non-busy tag (%d)\n", __FUNCTION__, tag); @@ -1137,6 +1143,10 @@ int blk_queue_start_tag(struct request_queue *q, struct request *rq) return 1; } while (test_and_set_bit(tag, bqt->tag_map)); + /* + * We rely on test_and_set_bit providing lock memory ordering semantics + * (could use test_and_set_bit_lock when it is merged). + */ rq->cmd_flags |= REQ_QUEUED; rq->tag = tag; -- cgit v1.2.3-70-g09d2 From 2123a09f3f129f4d56f59026ec63e5990f86db2f Mon Sep 17 00:00:00 2001 From: "aherrman@arcor.de" Date: Fri, 14 Sep 2007 01:28:56 +0200 Subject: Fix kernel buuild with (CONFIG_COMPAT && ! CONFIG_BLOCK) Commit 02a5e0acb3cb85d80d0fe834e366d38a92bbaa22 ("BLOCK: Hide the contents of linux/bio.h if CONFIG_BLOCK=n") broke the kernel build for the CONFIG_COMPAT && !CONFIG_BLOCK case: CC fs/compat_ioctl.o In file included from include/linux/raid/md_k.h:19, from include/linux/raid/md.h:54, from fs/compat_ioctl.c:25: include/linux/raid/../../../drivers/md/dm-bio-list.h: In bio_list_: include/linux/raid/../../../drivers/md/dm-bio-list.h:40: error: dereferencing pointer to incomplete type include/linux/raid/../../../drivers/md/dm-bio-list.h: In bio_list_: include/linux/raid/../../../drivers/md/dm-bio-list.h:48: error: dereferencing pointer to incomplete type include/linux/raid/../../../drivers/md/dm-bio-list.h:51: error: dereferencing pointer to incomplete type include/linux/raid/../../../drivers/md/dm-bio-list.h: In bio_list_: include/linux/raid/../../../drivers/md/dm-bio-list.h:64: error: dereferencing pointer to incomplete type include/linux/raid/../../../drivers/md/dm-bio-list.h: In bio_list_merge_: include/linux/raid/../../../drivers/md/dm-bio-list.h:78: error: dereferencing pointer to incomplete type include/linux/raid/../../../drivers/md/dm-bio-list.h: In bio_list_: include/linux/raid/../../../drivers/md/dm-bio-list.h:90: error: dereferencing pointer to incomplete type include/linux/raid/../../../drivers/md/dm-bio-list.h:94: error: dereferencing pointer to incomplete type make[1]: *** [fs/compat_ioctl.o] Error 1 make: *** [fs] Error 2 Signed-off-by: Andreas Herrmann Acked-By: David Howells Signed-off-by: Linus Torvalds --- drivers/md/dm-bio-list.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/md/dm-bio-list.h b/drivers/md/dm-bio-list.h index 16ee3b018b3..3f7b827649e 100644 --- a/drivers/md/dm-bio-list.h +++ b/drivers/md/dm-bio-list.h @@ -9,6 +9,8 @@ #include +#ifdef CONFIG_BLOCK + struct bio_list { struct bio *head; struct bio *tail; @@ -106,4 +108,5 @@ static inline struct bio *bio_list_get(struct bio_list *bl) return bio; } +#endif /* CONFIG_BLOCK */ #endif -- cgit v1.2.3-70-g09d2 From 7a1fa065a0264f6b3d3003ba5635289f6583c478 Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Fri, 14 Sep 2007 10:28:08 -0400 Subject: Correctly close old nfsd/lockd sockets. Commit aaf68cfbf2241d24d46583423f6bff5c47e088b3 added a bias to sk_inuse, so this test for an unused socket now fails. So no sockets get closed because they are old (they might get closed if the client closed them). This bug has existed since 2.6.21-rc1. Thanks to Wolfgang Walter for finding and reporting the bug. Cc: Wolfgang Walter Signed-off-by: Neil Brown Signed-off-by: J. Bruce Fields Signed-off-by: Linus Torvalds --- net/sunrpc/svcsock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 12ff5da8160..1a899924023 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -1592,7 +1592,7 @@ svc_age_temp_sockets(unsigned long closure) if (!test_and_set_bit(SK_OLD, &svsk->sk_flags)) continue; - if (atomic_read(&svsk->sk_inuse) || test_bit(SK_BUSY, &svsk->sk_flags)) + if (atomic_read(&svsk->sk_inuse) > 1 || test_bit(SK_BUSY, &svsk->sk_flags)) continue; atomic_inc(&svsk->sk_inuse); list_move(le, &to_be_aged); -- cgit v1.2.3-70-g09d2 From 22d95b1282810f5af599ee292b3fc443aefbdad0 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Fri, 14 Sep 2007 20:26:06 +0300 Subject: KVM: MMU: Fix rare oops on guest context switch A guest context switch to an uncached cr3 can require allocation of shadow pages, but we only recycle shadow pages in kvm_mmu_page_fault(). Move shadow page recycling to mmu_topup_memory_caches(), which is called from both the page fault handler and from guest cr3 reload. Signed-off-by: Avi Kivity Signed-off-by: Linus Torvalds --- drivers/kvm/kvm.h | 10 +++++++--- drivers/kvm/mmu.c | 5 +++-- 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/kvm/kvm.h b/drivers/kvm/kvm.h index 3ac9cbce336..336be86c6f5 100644 --- a/drivers/kvm/kvm.h +++ b/drivers/kvm/kvm.h @@ -619,7 +619,7 @@ unsigned long segment_base(u16 selector); void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, const u8 *old, const u8 *new, int bytes); int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva); -void kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu); +void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu); int kvm_mmu_load(struct kvm_vcpu *vcpu); void kvm_mmu_unload(struct kvm_vcpu *vcpu); @@ -628,11 +628,15 @@ int kvm_hypercall(struct kvm_vcpu *vcpu, struct kvm_run *run); static inline int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t gva, u32 error_code) { - if (unlikely(vcpu->kvm->n_free_mmu_pages < KVM_MIN_FREE_MMU_PAGES)) - kvm_mmu_free_some_pages(vcpu); return vcpu->mmu.page_fault(vcpu, gva, error_code); } +static inline void kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu) +{ + if (unlikely(vcpu->kvm->n_free_mmu_pages < KVM_MIN_FREE_MMU_PAGES)) + __kvm_mmu_free_some_pages(vcpu); +} + static inline int kvm_mmu_reload(struct kvm_vcpu *vcpu) { if (likely(vcpu->mmu.root_hpa != INVALID_PAGE)) diff --git a/drivers/kvm/mmu.c b/drivers/kvm/mmu.c index 1a87ba9d515..23965aa5ee7 100644 --- a/drivers/kvm/mmu.c +++ b/drivers/kvm/mmu.c @@ -273,12 +273,14 @@ static int mmu_topup_memory_caches(struct kvm_vcpu *vcpu) int r; r = __mmu_topup_memory_caches(vcpu, GFP_NOWAIT); + kvm_mmu_free_some_pages(vcpu); if (r < 0) { spin_unlock(&vcpu->kvm->lock); kvm_arch_ops->vcpu_put(vcpu); r = __mmu_topup_memory_caches(vcpu, GFP_KERNEL); kvm_arch_ops->vcpu_load(vcpu); spin_lock(&vcpu->kvm->lock); + kvm_mmu_free_some_pages(vcpu); } return r; } @@ -1208,7 +1210,7 @@ int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva) return kvm_mmu_unprotect_page(vcpu, gpa >> PAGE_SHIFT); } -void kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu) +void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu) { while (vcpu->kvm->n_free_mmu_pages < KVM_REFILL_PAGES) { struct kvm_mmu_page *page; @@ -1218,7 +1220,6 @@ void kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu) kvm_mmu_zap_page(vcpu->kvm, page); } } -EXPORT_SYMBOL_GPL(kvm_mmu_free_some_pages); static void free_mmu_pages(struct kvm_vcpu *vcpu) { -- cgit v1.2.3-70-g09d2 From 4878809f711981a602cc562eb47994fc81ea0155 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 14 Sep 2007 16:41:03 -0700 Subject: [NET]: Fix two issues wrt. SO_BINDTODEVICE. 1) Comments suggest that setting optlen to zero will unbind the socket from whatever device it might be attached to. This hasn't been the case since at least 2.2.x because the first thing this function does is return -EINVAL if 'optlen' is less than sizeof(int). This check also means that passing in a two byte string doesn't work so well. It's almost as if this code was testing with "eth?" patterned strings and nothing else :-) Fix this by breaking the logic of this facility out into a seperate function which validates optlen more appropriately. The optlen==0 and small string cases now work properly. 2) We should reset the cached route of the socket after we have made the device binding changes, not before. Reported by Ben Greear. Signed-off-by: David S. Miller --- net/core/sock.c | 106 +++++++++++++++++++++++++++++++------------------------- 1 file changed, 58 insertions(+), 48 deletions(-) diff --git a/net/core/sock.c b/net/core/sock.c index cfed7d42c48..190de61cd64 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -362,6 +362,61 @@ struct dst_entry *sk_dst_check(struct sock *sk, u32 cookie) } EXPORT_SYMBOL(sk_dst_check); +static int sock_bindtodevice(struct sock *sk, char __user *optval, int optlen) +{ + int ret = -ENOPROTOOPT; +#ifdef CONFIG_NETDEVICES + char devname[IFNAMSIZ]; + int index; + + /* Sorry... */ + ret = -EPERM; + if (!capable(CAP_NET_RAW)) + goto out; + + ret = -EINVAL; + if (optlen < 0) + goto out; + + /* Bind this socket to a particular device like "eth0", + * as specified in the passed interface name. If the + * name is "" or the option length is zero the socket + * is not bound. + */ + if (optlen > IFNAMSIZ - 1) + optlen = IFNAMSIZ - 1; + memset(devname, 0, sizeof(devname)); + + ret = -EFAULT; + if (copy_from_user(devname, optval, optlen)) + goto out; + + if (devname[0] == '\0') { + index = 0; + } else { + struct net_device *dev = dev_get_by_name(devname); + + ret = -ENODEV; + if (!dev) + goto out; + + index = dev->ifindex; + dev_put(dev); + } + + lock_sock(sk); + sk->sk_bound_dev_if = index; + sk_dst_reset(sk); + release_sock(sk); + + ret = 0; + +out: +#endif + + return ret; +} + /* * This is meant for all protocols to use and covers goings on * at the socket level. Everything here is generic. @@ -390,6 +445,9 @@ int sock_setsockopt(struct socket *sock, int level, int optname, } #endif + if (optname == SO_BINDTODEVICE) + return sock_bindtodevice(sk, optval, optlen); + if (optlen < sizeof(int)) return -EINVAL; @@ -578,54 +636,6 @@ set_rcvbuf: ret = sock_set_timeout(&sk->sk_sndtimeo, optval, optlen); break; -#ifdef CONFIG_NETDEVICES - case SO_BINDTODEVICE: - { - char devname[IFNAMSIZ]; - - /* Sorry... */ - if (!capable(CAP_NET_RAW)) { - ret = -EPERM; - break; - } - - /* Bind this socket to a particular device like "eth0", - * as specified in the passed interface name. If the - * name is "" or the option length is zero the socket - * is not bound. - */ - - if (!valbool) { - sk->sk_bound_dev_if = 0; - } else { - if (optlen > IFNAMSIZ - 1) - optlen = IFNAMSIZ - 1; - memset(devname, 0, sizeof(devname)); - if (copy_from_user(devname, optval, optlen)) { - ret = -EFAULT; - break; - } - - /* Remove any cached route for this socket. */ - sk_dst_reset(sk); - - if (devname[0] == '\0') { - sk->sk_bound_dev_if = 0; - } else { - struct net_device *dev = dev_get_by_name(devname); - if (!dev) { - ret = -ENODEV; - break; - } - sk->sk_bound_dev_if = dev->ifindex; - dev_put(dev); - } - } - break; - } -#endif - - case SO_ATTACH_FILTER: ret = -EINVAL; if (optlen == sizeof(struct sock_fprog)) { -- cgit v1.2.3-70-g09d2 From e1e992e52faa588667e1378a2573b4b8e3fa6670 Mon Sep 17 00:00:00 2001 From: Jamal Hadi Salim Date: Wed, 12 Sep 2007 16:32:59 +0200 Subject: [NET_SCHED] protect action config/dump from irqs (with no apologies to C Heston) On Mon, 2007-10-09 at 21:00 +0800, Herbert Xu wrote: On Sun, Sep 02, 2007 at 01:11:29PM +0000, Christian Kujau wrote: > > > > after upgrading to 2.6.23-rc5 (and applying davem's fix [0]), lockdep > > was quite noisy when I tried to shape my external (wireless) interface: > > > > [ 6400.534545] FahCore_78.exe/3552 just changed the state of lock: > > [ 6400.534713] (&dev->ingress_lock){-+..}, at: [] > > netif_receive_skb+0x2d5/0x3c0 > > [ 6400.534941] but this lock took another, soft-read-irq-unsafe lock in the > > past: > > [ 6400.535145] (police_lock){-.--} > > This is a genuine dead-lock. The police lock can be taken > for reading with softirqs on. If a second CPU tries to take > the police lock for writing, while holding the ingress lock, > then a softirq on the first CPU can dead-lock when it tries > to get the ingress lock. Signed-off-by: Jamal Hadi Salim Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/sched/act_api.c | 8 ++++---- net/sched/act_police.c | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/net/sched/act_api.c b/net/sched/act_api.c index feef366cad5..72cdb0fade2 100644 --- a/net/sched/act_api.c +++ b/net/sched/act_api.c @@ -68,7 +68,7 @@ static int tcf_dump_walker(struct sk_buff *skb, struct netlink_callback *cb, int err = 0, index = -1,i = 0, s_i = 0, n_i = 0; struct rtattr *r ; - read_lock(hinfo->lock); + read_lock_bh(hinfo->lock); s_i = cb->args[0]; @@ -96,7 +96,7 @@ static int tcf_dump_walker(struct sk_buff *skb, struct netlink_callback *cb, } } done: - read_unlock(hinfo->lock); + read_unlock_bh(hinfo->lock); if (n_i) cb->args[0] += n_i; return n_i; @@ -156,13 +156,13 @@ struct tcf_common *tcf_hash_lookup(u32 index, struct tcf_hashinfo *hinfo) { struct tcf_common *p; - read_lock(hinfo->lock); + read_lock_bh(hinfo->lock); for (p = hinfo->htab[tcf_hash(index, hinfo->hmask)]; p; p = p->tcfc_next) { if (p->tcfc_index == index) break; } - read_unlock(hinfo->lock); + read_unlock_bh(hinfo->lock); return p; } diff --git a/net/sched/act_police.c b/net/sched/act_police.c index 6085be57845..17f6f27e28a 100644 --- a/net/sched/act_police.c +++ b/net/sched/act_police.c @@ -56,7 +56,7 @@ static int tcf_act_police_walker(struct sk_buff *skb, struct netlink_callback *c int err = 0, index = -1, i = 0, s_i = 0, n_i = 0; struct rtattr *r; - read_lock(&police_lock); + read_lock_bh(&police_lock); s_i = cb->args[0]; @@ -85,7 +85,7 @@ static int tcf_act_police_walker(struct sk_buff *skb, struct netlink_callback *c } } done: - read_unlock(&police_lock); + read_unlock_bh(&police_lock); if (n_i) cb->args[0] += n_i; return n_i; -- cgit v1.2.3-70-g09d2 From 3ef9d943d26dea764f4fecf3767001c90b778b0c Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Fri, 14 Sep 2007 16:45:40 -0700 Subject: [IPV6]: Fix unbalanced socket reference with MSG_CONFIRM. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv6/raw.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index e27383d855d..77167afa345 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -882,11 +882,10 @@ back_from_confirm: ip6_flush_pending_frames(sk); else if (!(msg->msg_flags & MSG_MORE)) err = rawv6_push_pending_frames(sk, &fl, rp); + release_sock(sk); } done: dst_release(dst); - if (!inet->hdrincl) - release_sock(sk); out: fl6_sock_release(flowlabel); return err<0?err:len; -- cgit v1.2.3-70-g09d2 From cd562c9859f648d78224e9fc0dafa5a3d5000fdb Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Fri, 14 Sep 2007 17:15:01 -0700 Subject: [IPV6]: Just increment OutDatagrams once per a datagram. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv6/udp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 4210951edb6..c347f3e30e2 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -555,6 +555,8 @@ static int udp_v6_push_pending_frames(struct sock *sk) out: up->len = 0; up->pending = 0; + if (!err) + UDP6_INC_STATS_USER(UDP_MIB_OUTDATAGRAMS, up->pcflag); return err; } @@ -823,10 +825,8 @@ do_append_data: release_sock(sk); out: fl6_sock_release(flowlabel); - if (!err) { - UDP6_INC_STATS_USER(UDP_MIB_OUTDATAGRAMS, is_udplite); + if (!err) return len; - } /* * ENOBUFS = no kernel mem, SOCK_NOSPACE = no sndbuf space. Reporting * ENOBUFS might not be good (it's not tunable per se), but otherwise -- cgit v1.2.3-70-g09d2 From 2a0c6c980d209827e5d69017fa736f107a744d1d Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Fri, 14 Sep 2007 17:15:19 -0700 Subject: [IPV4]: Just increment OutDatagrams once per a datagram. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv4/udp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 28355350fb6..69d4bd10f9c 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -505,6 +505,8 @@ send: out: up->len = 0; up->pending = 0; + if (!err) + UDP_INC_STATS_USER(UDP_MIB_OUTDATAGRAMS, up->pcflag); return err; } @@ -693,10 +695,8 @@ out: ip_rt_put(rt); if (free) kfree(ipc.opt); - if (!err) { - UDP_INC_STATS_USER(UDP_MIB_OUTDATAGRAMS, is_udplite); + if (!err) return len; - } /* * ENOBUFS = no kernel mem, SOCK_NOSPACE = no sndbuf space. Reporting * ENOBUFS might not be good (it's not tunable per se), but otherwise -- cgit v1.2.3-70-g09d2 From bb8bd3a52a5dbca8bea31bfc72dacfb384170e69 Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Fri, 14 Sep 2007 17:03:01 -0700 Subject: sparc64 (and others): fix tty_ioctl.c build Add Guards around TIOCSLCKTRMIOS and TIOCGLCKTRMIOS. Several architectures are still broken. Put temporary-for-2.6.23 ifdef guards around the offending code. Signed-off-by: Tony Breeds Cc: Alan Cox Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Heiko Carstens Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by:: Linus Torvalds --- drivers/char/tty_ioctl.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index 4a8969cef31..3ee73cf64bd 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -795,6 +795,19 @@ int n_tty_ioctl(struct tty_struct * tty, struct file * file, if (L_ICANON(tty)) retval = inq_canon(tty); return put_user(retval, (unsigned int __user *) arg); +#ifndef TCGETS2 + case TIOCGLCKTRMIOS: + if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked)) + return -EFAULT; + return 0; + + case TIOCSLCKTRMIOS: + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (user_termios_to_kernel_termios(real_tty->termios_locked, (struct termios __user *) arg)) + return -EFAULT; + return 0; +#else case TIOCGLCKTRMIOS: if (kernel_termios_to_user_termios_1((struct termios __user *)arg, real_tty->termios_locked)) return -EFAULT; @@ -806,6 +819,7 @@ int n_tty_ioctl(struct tty_struct * tty, struct file * file, if (user_termios_to_kernel_termios_1(real_tty->termios_locked, (struct termios __user *) arg)) return -EFAULT; return 0; +#endif case TIOCPKT: { -- cgit v1.2.3-70-g09d2 From e7e381f639657b2e681ff6fb31e131db360550ac Mon Sep 17 00:00:00 2001 From: Dale Farnsworth Date: Fri, 14 Sep 2007 11:23:16 -0700 Subject: mv643xx_eth: Fix tx_bytes stats calculation Reported by Corey Minyard Signed-off-by: Jeff Garzik --- drivers/net/mv643xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 1799eee88db..6a117e9968c 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1222,7 +1222,7 @@ static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev) spin_lock_irqsave(&mp->lock, flags); eth_tx_submit_descs_for_skb(mp, skb); - stats->tx_bytes = skb->len; + stats->tx_bytes += skb->len; stats->tx_packets++; dev->trans_start = jiffies; -- cgit v1.2.3-70-g09d2 From 62270336e8fdfbea36cb455c27744c23780dbf07 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 13 Sep 2007 19:23:33 +0400 Subject: ucc_geth: fix compilation Currently qe_bd_t is used in the macro call -- dma_unmap_single, which is a no-op on PPC32, thus error is hidden today. Starting with 2.6.24, macro will be replaced by the empty static function, and erroneous use of qe_bd_t will trigger compilation error. Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik --- drivers/net/ucc_geth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 12e01b24105..9a38dfe45f8 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -2148,7 +2148,7 @@ static void ucc_geth_memclean(struct ucc_geth_private *ugeth) for (j = 0; j < ugeth->ug_info->bdRingLenTx[i]; j++) { if (ugeth->tx_skbuff[i][j]) { dma_unmap_single(NULL, - ((qe_bd_t *)bd)->buf, + ((struct qe_bd *)bd)->buf, (in_be32((u32 *)bd) & BD_LENGTH_MASK), DMA_TO_DEVICE); -- cgit v1.2.3-70-g09d2 From 5ad887fa8e875231d72a27c474b10241a5818bf1 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Sat, 15 Sep 2007 19:35:14 -0400 Subject: sk98lin: resurrect driver This reverts commit e1abecc48938fbe1966ea6e78267fc673fa59295. The driver works on some hardware that skge doesn't handle yet. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- Documentation/feature-removal-schedule.txt | 8 + Documentation/networking/00-INDEX | 3 + Documentation/networking/sk98lin.txt | 568 ++ drivers/net/Kconfig | 89 +- drivers/net/Makefile | 1 + drivers/net/sk98lin/Makefile | 87 + drivers/net/sk98lin/h/lm80.h | 179 + drivers/net/sk98lin/h/skaddr.h | 285 + drivers/net/sk98lin/h/skcsum.h | 213 + drivers/net/sk98lin/h/skdebug.h | 74 + drivers/net/sk98lin/h/skdrv1st.h | 188 + drivers/net/sk98lin/h/skdrv2nd.h | 447 ++ drivers/net/sk98lin/h/skerror.h | 55 + drivers/net/sk98lin/h/skgedrv.h | 51 + drivers/net/sk98lin/h/skgehw.h | 2126 +++++++ drivers/net/sk98lin/h/skgehwt.h | 48 + drivers/net/sk98lin/h/skgei2c.h | 210 + drivers/net/sk98lin/h/skgeinit.h | 797 +++ drivers/net/sk98lin/h/skgepnm2.h | 334 ++ drivers/net/sk98lin/h/skgepnmi.h | 962 ++++ drivers/net/sk98lin/h/skgesirq.h | 110 + drivers/net/sk98lin/h/ski2c.h | 174 + drivers/net/sk98lin/h/skqueue.h | 94 + drivers/net/sk98lin/h/skrlmt.h | 438 ++ drivers/net/sk98lin/h/sktimer.h | 63 + drivers/net/sk98lin/h/sktypes.h | 69 + drivers/net/sk98lin/h/skversion.h | 38 + drivers/net/sk98lin/h/skvpd.h | 248 + drivers/net/sk98lin/h/xmac_ii.h | 1579 ++++++ drivers/net/sk98lin/skaddr.c | 1788 ++++++ drivers/net/sk98lin/skdim.c | 742 +++ drivers/net/sk98lin/skethtool.c | 627 +++ drivers/net/sk98lin/skge.c | 5219 ++++++++++++++++++ drivers/net/sk98lin/skgehwt.c | 171 + drivers/net/sk98lin/skgeinit.c | 2005 +++++++ drivers/net/sk98lin/skgemib.c | 1075 ++++ drivers/net/sk98lin/skgepnmi.c | 8210 ++++++++++++++++++++++++++++ drivers/net/sk98lin/skgesirq.c | 2229 ++++++++ drivers/net/sk98lin/ski2c.c | 1296 +++++ drivers/net/sk98lin/sklm80.c | 141 + drivers/net/sk98lin/skqueue.c | 179 + drivers/net/sk98lin/skrlmt.c | 3257 +++++++++++ drivers/net/sk98lin/sktimer.c | 250 + drivers/net/sk98lin/skvpd.c | 1091 ++++ drivers/net/sk98lin/skxmac2.c | 4160 ++++++++++++++ 45 files changed, 41977 insertions(+), 1 deletion(-) create mode 100644 Documentation/networking/sk98lin.txt create mode 100644 drivers/net/sk98lin/Makefile create mode 100644 drivers/net/sk98lin/h/lm80.h create mode 100644 drivers/net/sk98lin/h/skaddr.h create mode 100644 drivers/net/sk98lin/h/skcsum.h create mode 100644 drivers/net/sk98lin/h/skdebug.h create mode 100644 drivers/net/sk98lin/h/skdrv1st.h create mode 100644 drivers/net/sk98lin/h/skdrv2nd.h create mode 100644 drivers/net/sk98lin/h/skerror.h create mode 100644 drivers/net/sk98lin/h/skgedrv.h create mode 100644 drivers/net/sk98lin/h/skgehw.h create mode 100644 drivers/net/sk98lin/h/skgehwt.h create mode 100644 drivers/net/sk98lin/h/skgei2c.h create mode 100644 drivers/net/sk98lin/h/skgeinit.h create mode 100644 drivers/net/sk98lin/h/skgepnm2.h create mode 100644 drivers/net/sk98lin/h/skgepnmi.h create mode 100644 drivers/net/sk98lin/h/skgesirq.h create mode 100644 drivers/net/sk98lin/h/ski2c.h create mode 100644 drivers/net/sk98lin/h/skqueue.h create mode 100644 drivers/net/sk98lin/h/skrlmt.h create mode 100644 drivers/net/sk98lin/h/sktimer.h create mode 100644 drivers/net/sk98lin/h/sktypes.h create mode 100644 drivers/net/sk98lin/h/skversion.h create mode 100644 drivers/net/sk98lin/h/skvpd.h create mode 100644 drivers/net/sk98lin/h/xmac_ii.h create mode 100644 drivers/net/sk98lin/skaddr.c create mode 100644 drivers/net/sk98lin/skdim.c create mode 100644 drivers/net/sk98lin/skethtool.c create mode 100644 drivers/net/sk98lin/skge.c create mode 100644 drivers/net/sk98lin/skgehwt.c create mode 100644 drivers/net/sk98lin/skgeinit.c create mode 100644 drivers/net/sk98lin/skgemib.c create mode 100644 drivers/net/sk98lin/skgepnmi.c create mode 100644 drivers/net/sk98lin/skgesirq.c create mode 100644 drivers/net/sk98lin/ski2c.c create mode 100644 drivers/net/sk98lin/sklm80.c create mode 100644 drivers/net/sk98lin/skqueue.c create mode 100644 drivers/net/sk98lin/skrlmt.c create mode 100644 drivers/net/sk98lin/sktimer.c create mode 100644 drivers/net/sk98lin/skvpd.c create mode 100644 drivers/net/sk98lin/skxmac2.c diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index b9a3fdc1cc5..00928d2ecfb 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -298,3 +298,11 @@ Why: All mthca hardware also supports MSI-X, which provides Who: Roland Dreier --------------------------- + +What: sk98lin network driver +When: Feburary 2008 +Why: In kernel tree version of driver is unmaintained. Sk98lin driver + replaced by the skge driver. +Who: Stephen Hemminger + +--------------------------- diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX index d63f480afb7..153d84d281e 100644 --- a/Documentation/networking/00-INDEX +++ b/Documentation/networking/00-INDEX @@ -96,6 +96,9 @@ routing.txt - the new routing mechanism shaper.txt - info on the module that can shape/limit transmitted traffic. +sk98lin.txt + - Marvell Yukon Chipset / SysKonnect SK-98xx compliant Gigabit + Ethernet Adapter family driver info skfp.txt - SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info. smc9.txt diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt new file mode 100644 index 00000000000..8590a954df1 --- /dev/null +++ b/Documentation/networking/sk98lin.txt @@ -0,0 +1,568 @@ +(C)Copyright 1999-2004 Marvell(R). +All rights reserved +=========================================================================== + +sk98lin.txt created 13-Feb-2004 + +Readme File for sk98lin v6.23 +Marvell Yukon/SysKonnect SK-98xx Gigabit Ethernet Adapter family driver for LINUX + +This file contains + 1 Overview + 2 Required Files + 3 Installation + 3.1 Driver Installation + 3.2 Inclusion of adapter at system start + 4 Driver Parameters + 4.1 Per-Port Parameters + 4.2 Adapter Parameters + 5 Large Frame Support + 6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad) + 7 Troubleshooting + +=========================================================================== + + +1 Overview +=========== + +The sk98lin driver supports the Marvell Yukon and SysKonnect +SK-98xx/SK-95xx compliant Gigabit Ethernet Adapter on Linux. It has +been tested with Linux on Intel/x86 machines. +*** + + +2 Required Files +================= + +The linux kernel source. +No additional files required. +*** + + +3 Installation +=============== + +It is recommended to download the latest version of the driver from the +SysKonnect web site www.syskonnect.com. If you have downloaded the latest +driver, the Linux kernel has to be patched before the driver can be +installed. For details on how to patch a Linux kernel, refer to the +patch.txt file. + +3.1 Driver Installation +------------------------ + +The following steps describe the actions that are required to install +the driver and to start it manually. These steps should be carried +out for the initial driver setup. Once confirmed to be ok, they can +be included in the system start. + +NOTE 1: To perform the following tasks you need 'root' access. + +NOTE 2: In case of problems, please read the section "Troubleshooting" + below. + +The driver can either be integrated into the kernel or it can be compiled +as a module. Select the appropriate option during the kernel +configuration. + +Compile/use the driver as a module +---------------------------------- +To compile the driver, go to the directory /usr/src/linux and +execute the command "make menuconfig" or "make xconfig" and proceed as +follows: + +To integrate the driver permanently into the kernel, proceed as follows: + +1. Select the menu "Network device support" and then "Ethernet(1000Mbit)" +2. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support" + with (*) +3. Build a new kernel when the configuration of the above options is + finished. +4. Install the new kernel. +5. Reboot your system. + +To use the driver as a module, proceed as follows: + +1. Enable 'loadable module support' in the kernel. +2. For automatic driver start, enable the 'Kernel module loader'. +3. Select the menu "Network device support" and then "Ethernet(1000Mbit)" +4. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support" + with (M) +5. Execute the command "make modules". +6. Execute the command "make modules_install". + The appropriate modules will be installed. +7. Reboot your system. + + +Load the module manually +------------------------ +To load the module manually, proceed as follows: + +1. Enter "modprobe sk98lin". +2. If a Marvell Yukon or SysKonnect SK-98xx adapter is installed in + your computer and you have a /proc file system, execute the command: + "ls /proc/net/sk98lin/" + This should produce an output containing a line with the following + format: + eth0 eth1 ... + which indicates that your adapter has been found and initialized. + + NOTE 1: If you have more than one Marvell Yukon or SysKonnect SK-98xx + adapter installed, the adapters will be listed as 'eth0', + 'eth1', 'eth2', etc. + For each adapter, repeat steps 3 and 4 below. + + NOTE 2: If you have other Ethernet adapters installed, your Marvell + Yukon or SysKonnect SK-98xx adapter will be mapped to the + next available number, e.g. 'eth1'. The mapping is executed + automatically. + The module installation message (displayed either in a system + log file or on the console) prints a line for each adapter + found containing the corresponding 'ethX'. + +3. Select an IP address and assign it to the respective adapter by + entering: + ifconfig eth0 + With this command, the adapter is connected to the Ethernet. + + SK-98xx Gigabit Ethernet Server Adapters: The yellow LED on the adapter + is now active, the link status LED of the primary port is active and + the link status LED of the secondary port (on dual port adapters) is + blinking (if the ports are connected to a switch or hub). + SK-98xx V2.0 Gigabit Ethernet Adapters: The link status LED is active. + In addition, you will receive a status message on the console stating + "ethX: network connection up using port Y" and showing the selected + connection parameters (x stands for the ethernet device number + (0,1,2, etc), y stands for the port name (A or B)). + + NOTE: If you are in doubt about IP addresses, ask your network + administrator for assistance. + +4. Your adapter should now be fully operational. + Use 'ping ' to verify the connection to other computers + on your network. +5. To check the adapter configuration view /proc/net/sk98lin/[devicename]. + For example by executing: + "cat /proc/net/sk98lin/eth0" + +Unload the module +----------------- +To stop and unload the driver modules, proceed as follows: + +1. Execute the command "ifconfig eth0 down". +2. Execute the command "rmmod sk98lin". + +3.2 Inclusion of adapter at system start +----------------------------------------- + +Since a large number of different Linux distributions are +available, we are unable to describe a general installation procedure +for the driver module. +Because the driver is now integrated in the kernel, installation should +be easy, using the standard mechanism of your distribution. +Refer to the distribution's manual for installation of ethernet adapters. + +*** + +4 Driver Parameters +==================== + +Parameters can be set at the command line after the module has been +loaded with the command 'modprobe'. +In some distributions, the configuration tools are able to pass parameters +to the driver module. + +If you use the kernel module loader, you can set driver parameters +in the file /etc/modprobe.conf (or /etc/modules.conf in 2.4 or earlier). +To set the driver parameters in this file, proceed as follows: + +1. Insert a line of the form : + options sk98lin ... + For "...", the same syntax is required as described for the command + line parameters of modprobe below. +2. To activate the new parameters, either reboot your computer + or + unload and reload the driver. + The syntax of the driver parameters is: + + modprobe sk98lin parameter=value1[,value2[,value3...]] + + where value1 refers to the first adapter, value2 to the second etc. + +NOTE: All parameters are case sensitive. Write them exactly as shown + below. + +Example: +Suppose you have two adapters. You want to set auto-negotiation +on the first adapter to ON and on the second adapter to OFF. +You also want to set DuplexCapabilities on the first adapter +to FULL, and on the second adapter to HALF. +Then, you must enter: + + modprobe sk98lin AutoNeg_A=On,Off DupCap_A=Full,Half + +NOTE: The number of adapters that can be configured this way is + limited in the driver (file skge.c, constant SK_MAX_CARD_PARAM). + The current limit is 16. If you happen to install + more adapters, adjust this and recompile. + + +4.1 Per-Port Parameters +------------------------ + +These settings are available for each port on the adapter. +In the following description, '?' stands for the port for +which you set the parameter (A or B). + +Speed +----- +Parameter: Speed_? +Values: 10, 100, 1000, Auto +Default: Auto + +This parameter is used to set the speed capabilities. It is only valid +for the SK-98xx V2.0 copper adapters. +Usually, the speed is negotiated between the two ports during link +establishment. If this fails, a port can be forced to a specific setting +with this parameter. + +Auto-Negotiation +---------------- +Parameter: AutoNeg_? +Values: On, Off, Sense +Default: On + +The "Sense"-mode automatically detects whether the link partner supports +auto-negotiation or not. + +Duplex Capabilities +------------------- +Parameter: DupCap_? +Values: Half, Full, Both +Default: Both + +This parameters is only relevant if auto-negotiation for this port is +not set to "Sense". If auto-negotiation is set to "On", all three values +are possible. If it is set to "Off", only "Full" and "Half" are allowed. +This parameter is useful if your link partner does not support all +possible combinations. + +Flow Control +------------ +Parameter: FlowCtrl_? +Values: Sym, SymOrRem, LocSend, None +Default: SymOrRem + +This parameter can be used to set the flow control capabilities the +port reports during auto-negotiation. It can be set for each port +individually. +Possible modes: + -- Sym = Symmetric: both link partners are allowed to send + PAUSE frames + -- SymOrRem = SymmetricOrRemote: both or only remote partner + are allowed to send PAUSE frames + -- LocSend = LocalSend: only local link partner is allowed + to send PAUSE frames + -- None = no link partner is allowed to send PAUSE frames + +NOTE: This parameter is ignored if auto-negotiation is set to "Off". + +Role in Master-Slave-Negotiation (1000Base-T only) +-------------------------------------------------- +Parameter: Role_? +Values: Auto, Master, Slave +Default: Auto + +This parameter is only valid for the SK-9821 and SK-9822 adapters. +For two 1000Base-T ports to communicate, one must take the role of the +master (providing timing information), while the other must be the +slave. Usually, this is negotiated between the two ports during link +establishment. If this fails, a port can be forced to a specific setting +with this parameter. + + +4.2 Adapter Parameters +----------------------- + +Connection Type (SK-98xx V2.0 copper adapters only) +--------------- +Parameter: ConType +Values: Auto, 100FD, 100HD, 10FD, 10HD +Default: Auto + +The parameter 'ConType' is a combination of all five per-port parameters +within one single parameter. This simplifies the configuration of both ports +of an adapter card! The different values of this variable reflect the most +meaningful combinations of port parameters. + +The following table shows the values of 'ConType' and the corresponding +combinations of the per-port parameters: + + ConType | DupCap AutoNeg FlowCtrl Role Speed + ----------+------------------------------------------------------ + Auto | Both On SymOrRem Auto Auto + 100FD | Full Off None Auto (ignored) 100 + 100HD | Half Off None Auto (ignored) 100 + 10FD | Full Off None Auto (ignored) 10 + 10HD | Half Off None Auto (ignored) 10 + +Stating any other port parameter together with this 'ConType' variable +will result in a merged configuration of those settings. This due to +the fact, that the per-port parameters (e.g. Speed_? ) have a higher +priority than the combined variable 'ConType'. + +NOTE: This parameter is always used on both ports of the adapter card. + +Interrupt Moderation +-------------------- +Parameter: Moderation +Values: None, Static, Dynamic +Default: None + +Interrupt moderation is employed to limit the maximum number of interrupts +the driver has to serve. That is, one or more interrupts (which indicate any +transmit or receive packet to be processed) are queued until the driver +processes them. When queued interrupts are to be served, is determined by the +'IntsPerSec' parameter, which is explained later below. + +Possible modes: + + -- None - No interrupt moderation is applied on the adapter card. + Therefore, each transmit or receive interrupt is served immediately + as soon as it appears on the interrupt line of the adapter card. + + -- Static - Interrupt moderation is applied on the adapter card. + All transmit and receive interrupts are queued until a complete + moderation interval ends. If such a moderation interval ends, all + queued interrupts are processed in one big bunch without any delay. + The term 'static' reflects the fact, that interrupt moderation is + always enabled, regardless how much network load is currently + passing via a particular interface. In addition, the duration of + the moderation interval has a fixed length that never changes while + the driver is operational. + + -- Dynamic - Interrupt moderation might be applied on the adapter card, + depending on the load of the system. If the driver detects that the + system load is too high, the driver tries to shield the system against + too much network load by enabling interrupt moderation. If - at a later + time - the CPU utilization decreases again (or if the network load is + negligible) the interrupt moderation will automatically be disabled. + +Interrupt moderation should be used when the driver has to handle one or more +interfaces with a high network load, which - as a consequence - leads also to a +high CPU utilization. When moderation is applied in such high network load +situations, CPU load might be reduced by 20-30%. + +NOTE: The drawback of using interrupt moderation is an increase of the round- +trip-time (RTT), due to the queueing and serving of interrupts at dedicated +moderation times. + +Interrupts per second +--------------------- +Parameter: IntsPerSec +Values: 30...40000 (interrupts per second) +Default: 2000 + +This parameter is only used if either static or dynamic interrupt moderation +is used on a network adapter card. Using this parameter if no moderation is +applied will lead to no action performed. + +This parameter determines the length of any interrupt moderation interval. +Assuming that static interrupt moderation is to be used, an 'IntsPerSec' +parameter value of 2000 will lead to an interrupt moderation interval of +500 microseconds. + +NOTE: The duration of the moderation interval is to be chosen with care. +At first glance, selecting a very long duration (e.g. only 100 interrupts per +second) seems to be meaningful, but the increase of packet-processing delay +is tremendous. On the other hand, selecting a very short moderation time might +compensate the use of any moderation being applied. + + +Preferred Port +-------------- +Parameter: PrefPort +Values: A, B +Default: A + +This is used to force the preferred port to A or B (on dual-port network +adapters). The preferred port is the one that is used if both are detected +as fully functional. + +RLMT Mode (Redundant Link Management Technology) +------------------------------------------------ +Parameter: RlmtMode +Values: CheckLinkState,CheckLocalPort, CheckSeg, DualNet +Default: CheckLinkState + +RLMT monitors the status of the port. If the link of the active port +fails, RLMT switches immediately to the standby link. The virtual link is +maintained as long as at least one 'physical' link is up. + +Possible modes: + + -- CheckLinkState - Check link state only: RLMT uses the link state + reported by the adapter hardware for each individual port to + determine whether a port can be used for all network traffic or + not. + + -- CheckLocalPort - In this mode, RLMT monitors the network path + between the two ports of an adapter by regularly exchanging packets + between them. This mode requires a network configuration in which + the two ports are able to "see" each other (i.e. there must not be + any router between the ports). + + -- CheckSeg - Check local port and segmentation: This mode supports the + same functions as the CheckLocalPort mode and additionally checks + network segmentation between the ports. Therefore, this mode is only + to be used if Gigabit Ethernet switches are installed on the network + that have been configured to use the Spanning Tree protocol. + + -- DualNet - In this mode, ports A and B are used as separate devices. + If you have a dual port adapter, port A will be configured as eth0 + and port B as eth1. Both ports can be used independently with + distinct IP addresses. The preferred port setting is not used. + RLMT is turned off. + +NOTE: RLMT modes CLP and CLPSS are designed to operate in configurations + where a network path between the ports on one adapter exists. + Moreover, they are not designed to work where adapters are connected + back-to-back. +*** + + +5 Large Frame Support +====================== + +The driver supports large frames (also called jumbo frames). Using large +frames can result in an improved throughput if transferring large amounts +of data. +To enable large frames, set the MTU (maximum transfer unit) of the +interface to the desired value (up to 9000), execute the following +command: + ifconfig eth0 mtu 9000 +This will only work if you have two adapters connected back-to-back +or if you use a switch that supports large frames. When using a switch, +it should be configured to allow large frames and auto-negotiation should +be set to OFF. The setting must be configured on all adapters that can be +reached by the large frames. If one adapter is not set to receive large +frames, it will simply drop them. + +You can switch back to the standard ethernet frame size by executing the +following command: + ifconfig eth0 mtu 1500 + +To permanently configure this setting, add a script with the 'ifconfig' +line to the system startup sequence (named something like "S99sk98lin" +in /etc/rc.d/rc2.d). +*** + + +6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad) +================================================================== + +The Marvell Yukon/SysKonnect Linux drivers are able to support VLAN and +Link Aggregation according to IEEE standards 802.1, 802.1q, and 802.3ad. +These features are only available after installation of open source +modules available on the Internet: +For VLAN go to: http://www.candelatech.com/~greear/vlan.html +For Link Aggregation go to: http://www.st.rim.or.jp/~yumo + +NOTE: SysKonnect GmbH does not offer any support for these open source + modules and does not take the responsibility for any kind of + failures or problems arising in connection with these modules. + +NOTE: Configuring Link Aggregation on a SysKonnect dual link adapter may + cause problems when unloading the driver. + + +7 Troubleshooting +================== + +If any problems occur during the installation process, check the +following list: + + +Problem: The SK-98xx adapter cannot be found by the driver. +Solution: In /proc/pci search for the following entry: + 'Ethernet controller: SysKonnect SK-98xx ...' + If this entry exists, the SK-98xx or SK-98xx V2.0 adapter has + been found by the system and should be operational. + If this entry does not exist or if the file '/proc/pci' is not + found, there may be a hardware problem or the PCI support may + not be enabled in your kernel. + The adapter can be checked using the diagnostics program which + is available on the SysKonnect web site: + www.syskonnect.com + + Some COMPAQ machines have problems dealing with PCI under Linux. + This problem is described in the 'PCI howto' document + (included in some distributions or available from the + web, e.g. at 'www.linux.org'). + + +Problem: Programs such as 'ifconfig' or 'route' cannot be found or the + error message 'Operation not permitted' is displayed. +Reason: You are not logged in as user 'root'. +Solution: Logout and login as 'root' or change to 'root' via 'su'. + + +Problem: Upon use of the command 'ping
' the message + "ping: sendto: Network is unreachable" is displayed. +Reason: Your route is not set correctly. +Solution: If you are using RedHat, you probably forgot to set up the + route in the 'network configuration'. + Check the existing routes with the 'route' command and check + if an entry for 'eth0' exists, and if so, if it is set correctly. + + +Problem: The driver can be started, the adapter is connected to the + network, but you cannot receive or transmit any packets; + e.g. 'ping' does not work. +Reason: There is an incorrect route in your routing table. +Solution: Check the routing table with the command 'route' and read the + manual help pages dealing with routes (enter 'man route'). + +NOTE: Although the 2.2.x kernel versions generate the routing entry + automatically, problems of this kind may occur here as well. We've + come across a situation in which the driver started correctly at + system start, but after the driver has been removed and reloaded, + the route of the adapter's network pointed to the 'dummy0'device + and had to be corrected manually. + + +Problem: Your computer should act as a router between multiple + IP subnetworks (using multiple adapters), but computers in + other subnetworks cannot be reached. +Reason: Either the router's kernel is not configured for IP forwarding + or the routing table and gateway configuration of at least one + computer is not working. + +Problem: Upon driver start, the following error message is displayed: + "eth0: -- ERROR -- + Class: internal Software error + Nr: 0xcc + Msg: SkGeInitPort() cannot init running ports" +Reason: You are using a driver compiled for single processor machines + on a multiprocessor machine with SMP (Symmetric MultiProcessor) + kernel. +Solution: Configure your kernel appropriately and recompile the kernel or + the modules. + + + +If your problem is not listed here, please contact SysKonnect's technical +support for help (linux@syskonnect.de). +When contacting our technical support, please ensure that the following +information is available: +- System Manufacturer and HW Informations (CPU, Memory... ) +- PCI-Boards in your system +- Distribution +- Kernel version +- Driver version +*** + + + +***End of Readme File*** diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 5b9e17bf174..c5519250efd 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2177,7 +2177,7 @@ config SKGE with better performance and more complete ethtool support. It does not support the link failover and network management - features available in the hardware. + features that "portable" vendor supplied sk98lin driver does. This driver supports adapters based on the original Yukon chipset: Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, @@ -2215,6 +2215,93 @@ config SKY2_DEBUG If unsure, say N. +config SK98LIN + tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)" + depends on PCI + ---help--- + Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx + compliant Gigabit Ethernet Adapter. + + This driver supports the original Yukon chipset. This driver is + deprecated and will be removed from the kernel in the near future, + it has been replaced by the skge driver. skge is cleaner and + seems to work better. + + This driver does not support the newer Yukon2 chipset. A separate + driver, sky2, is provided to support Yukon2-based adapters. + + The following adapters are supported by this driver: + - 3Com 3C940 Gigabit LOM Ethernet Adapter + - 3Com 3C941 Gigabit LOM Ethernet Adapter + - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter + - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter + - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter + - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter + - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter + - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter + - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter + - Allied Telesyn AT-2971T Gigabit Ethernet Adapter + - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45 + - EG1032 v2 Instant Gigabit Network Adapter + - EG1064 v2 Instant Gigabit Network Adapter + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte) + - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill) + - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel) + - Marvell RDK-8001 Adapter + - Marvell RDK-8002 Adapter + - Marvell RDK-8003 Adapter + - Marvell RDK-8004 Adapter + - Marvell RDK-8006 Adapter + - Marvell RDK-8007 Adapter + - Marvell RDK-8008 Adapter + - Marvell RDK-8009 Adapter + - Marvell RDK-8010 Adapter + - Marvell RDK-8011 Adapter + - Marvell RDK-8012 Adapter + - Marvell RDK-8052 Adapter + - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit) + - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit) + - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L) + - SK-9521 10/100/1000Base-T Adapter + - SK-9521 V2.0 10/100/1000Base-T Adapter + - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T) + - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter + - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link) + - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX) + - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter + - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link) + - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX) + - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter + - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link) + - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter + - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition) + - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter + - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link) + - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX) + - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter + - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link) + - SMC EZ Card 1000 (SMC9452TXV.2) + + The adapters support Jumbo Frames. + The dual link adapters support link-failover and dual port features. + Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support + the scatter-gather functionality with sendfile(). Please refer to + for more information about + optional driver parameters. + Questions concerning this driver may be addressed to: + + + If you want to compile this driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read . The module will + be called sk98lin. This is recommended. + config VIA_VELOCITY tristate "VIA Velocity support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index e684212fd8e..9c928a84584 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -66,6 +66,7 @@ ps3_gelic-objs += ps3_gelic_net.o obj-$(CONFIG_TC35815) += tc35815.o obj-$(CONFIG_SKGE) += skge.o obj-$(CONFIG_SKY2) += sky2.o +obj-$(CONFIG_SK98LIN) += sk98lin/ obj-$(CONFIG_SKFP) += skfp/ obj-$(CONFIG_VIA_RHINE) += via-rhine.o obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile new file mode 100644 index 00000000000..afd900d5d73 --- /dev/null +++ b/drivers/net/sk98lin/Makefile @@ -0,0 +1,87 @@ +# +# Makefile for the SysKonnect SK-98xx device driver. +# + + +# +# Standalone driver params +# SKPARAM += -DSK_KERNEL_24 +# SKPARAM += -DSK_KERNEL_24_26 +# SKPARAM += -DSK_KERNEL_26 +# SKPARAM += -DSK_KERNEL_22_24 + +obj-$(CONFIG_SK98LIN) += sk98lin.o +sk98lin-objs := \ + skge.o \ + skethtool.o \ + skdim.o \ + skaddr.o \ + skgehwt.o \ + skgeinit.o \ + skgepnmi.o \ + skgesirq.o \ + ski2c.o \ + sklm80.o \ + skqueue.o \ + skrlmt.o \ + sktimer.o \ + skvpd.o \ + skxmac2.o + +# DBGDEF = \ +# -DDEBUG + +ifdef DEBUG +DBGDEF += \ +-DSK_DEBUG_CHKMOD=0x00000000L \ +-DSK_DEBUG_CHKCAT=0x00000000L +endif + + +# **** possible debug modules for SK_DEBUG_CHKMOD ***************** +# SK_DBGMOD_MERR 0x00000001L /* general module error indication */ +# SK_DBGMOD_HWM 0x00000002L /* Hardware init module */ +# SK_DBGMOD_RLMT 0x00000004L /* RLMT module */ +# SK_DBGMOD_VPD 0x00000008L /* VPD module */ +# SK_DBGMOD_I2C 0x00000010L /* I2C module */ +# SK_DBGMOD_PNMI 0x00000020L /* PNMI module */ +# SK_DBGMOD_CSUM 0x00000040L /* CSUM module */ +# SK_DBGMOD_ADDR 0x00000080L /* ADDR module */ +# SK_DBGMOD_DRV 0x00010000L /* DRV module */ + +# **** possible debug categories for SK_DEBUG_CHKCAT ************** +# *** common modules *** +# SK_DBGCAT_INIT 0x00000001L module/driver initialization +# SK_DBGCAT_CTRL 0x00000002L controlling: add/rmv MCA/MAC and other controls (IOCTL) +# SK_DBGCAT_ERR 0x00000004L error handling paths +# SK_DBGCAT_TX 0x00000008L transmit path +# SK_DBGCAT_RX 0x00000010L receive path +# SK_DBGCAT_IRQ 0x00000020L general IRQ handling +# SK_DBGCAT_QUEUE 0x00000040L any queue management +# SK_DBGCAT_DUMP 0x00000080L large data output e.g. hex dump +# SK_DBGCAT_FATAL 0x00000100L large data output e.g. hex dump + +# *** driver (file skge.c) *** +# SK_DBGCAT_DRV_ENTRY 0x00010000 entry points +# SK_DBGCAT_DRV_??? 0x00020000 not used +# SK_DBGCAT_DRV_MCA 0x00040000 multicast +# SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 tx path +# SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 rx path +# SK_DBGCAT_DRV_PROGRESS 0x00200000 general runtime +# SK_DBGCAT_DRV_??? 0x00400000 not used +# SK_DBGCAT_DRV_PROM 0x00800000 promiscuous mode +# SK_DBGCAT_DRV_TX_FRAME 0x01000000 display tx frames +# SK_DBGCAT_DRV_ERROR 0x02000000 error conditions +# SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources +# SK_DBGCAT_DRV_EVENT 0x08000000 driver events + +EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM) + +clean: + rm -f core *.o *.a *.s + + + + + + diff --git a/drivers/net/sk98lin/h/lm80.h b/drivers/net/sk98lin/h/lm80.h new file mode 100644 index 00000000000..4e2dbbf7800 --- /dev/null +++ b/drivers/net/sk98lin/h/lm80.h @@ -0,0 +1,179 @@ +/****************************************************************************** + * + * Name: lm80.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.6 $ + * Date: $Date: 2003/05/13 17:26:52 $ + * Purpose: Contains all defines for the LM80 Chip + * (National Semiconductor). + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef __INC_LM80_H +#define __INC_LM80_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* defines ********************************************************************/ + +/* + * LM80 register definition + * + * All registers are 8 bit wide + */ +#define LM80_CFG 0x00 /* Configuration Register */ +#define LM80_ISRC_1 0x01 /* Interrupt Status Register 1 */ +#define LM80_ISRC_2 0x02 /* Interrupt Status Register 2 */ +#define LM80_IMSK_1 0x03 /* Interrupt Mask Register 1 */ +#define LM80_IMSK_2 0x04 /* Interrupt Mask Register 2 */ +#define LM80_FAN_CTRL 0x05 /* Fan Devisor/RST#/OS# Register */ +#define LM80_TEMP_CTRL 0x06 /* OS# Config, Temp Res. Reg */ + /* 0x07 - 0x1f reserved */ + /* current values */ +#define LM80_VT0_IN 0x20 /* current Voltage 0 value */ +#define LM80_VT1_IN 0x21 /* current Voltage 1 value */ +#define LM80_VT2_IN 0x22 /* current Voltage 2 value */ +#define LM80_VT3_IN 0x23 /* current Voltage 3 value */ +#define LM80_VT4_IN 0x24 /* current Voltage 4 value */ +#define LM80_VT5_IN 0x25 /* current Voltage 5 value */ +#define LM80_VT6_IN 0x26 /* current Voltage 6 value */ +#define LM80_TEMP_IN 0x27 /* current Temperature value */ +#define LM80_FAN1_IN 0x28 /* current Fan 1 count */ +#define LM80_FAN2_IN 0x29 /* current Fan 2 count */ + /* limit values */ +#define LM80_VT0_HIGH_LIM 0x2a /* high limit val for Voltage 0 */ +#define LM80_VT0_LOW_LIM 0x2b /* low limit val for Voltage 0 */ +#define LM80_VT1_HIGH_LIM 0x2c /* high limit val for Voltage 1 */ +#define LM80_VT1_LOW_LIM 0x2d /* low limit val for Voltage 1 */ +#define LM80_VT2_HIGH_LIM 0x2e /* high limit val for Voltage 2 */ +#define LM80_VT2_LOW_LIM 0x2f /* low limit val for Voltage 2 */ +#define LM80_VT3_HIGH_LIM 0x30 /* high limit val for Voltage 3 */ +#define LM80_VT3_LOW_LIM 0x31 /* low limit val for Voltage 3 */ +#define LM80_VT4_HIGH_LIM 0x32 /* high limit val for Voltage 4 */ +#define LM80_VT4_LOW_LIM 0x33 /* low limit val for Voltage 4 */ +#define LM80_VT5_HIGH_LIM 0x34 /* high limit val for Voltage 5 */ +#define LM80_VT5_LOW_LIM 0x35 /* low limit val for Voltage 5 */ +#define LM80_VT6_HIGH_LIM 0x36 /* high limit val for Voltage 6 */ +#define LM80_VT6_LOW_LIM 0x37 /* low limit val for Voltage 6 */ +#define LM80_THOT_LIM_UP 0x38 /* hot temperature limit (high) */ +#define LM80_THOT_LIM_LO 0x39 /* hot temperature limit (low) */ +#define LM80_TOS_LIM_UP 0x3a /* OS temperature limit (high) */ +#define LM80_TOS_LIM_LO 0x3b /* OS temperature limit (low) */ +#define LM80_FAN1_COUNT_LIM 0x3c /* Fan 1 count limit (high) */ +#define LM80_FAN2_COUNT_LIM 0x3d /* Fan 2 count limit (low) */ + /* 0x3e - 0x3f reserved */ + +/* + * LM80 bit definitions + */ + +/* LM80_CFG Configuration Register */ +#define LM80_CFG_START (1<<0) /* start monitoring operation */ +#define LM80_CFG_INT_ENA (1<<1) /* enables the INT# Interrupt output */ +#define LM80_CFG_INT_POL (1<<2) /* INT# pol: 0 act low, 1 act high */ +#define LM80_CFG_INT_CLR (1<<3) /* disables INT#/RST_OUT#/OS# outputs */ +#define LM80_CFG_RESET (1<<4) /* signals a reset */ +#define LM80_CFG_CHASS_CLR (1<<5) /* clears Chassis Intrusion (CI) pin */ +#define LM80_CFG_GPO (1<<6) /* drives the GPO# pin */ +#define LM80_CFG_INIT (1<<7) /* restore power on defaults */ + +/* LM80_ISRC_1 Interrupt Status Register 1 */ +/* LM80_IMSK_1 Interrupt Mask Register 1 */ +#define LM80_IS_VT0 (1<<0) /* limit exceeded for Voltage 0 */ +#define LM80_IS_VT1 (1<<1) /* limit exceeded for Voltage 1 */ +#define LM80_IS_VT2 (1<<2) /* limit exceeded for Voltage 2 */ +#define LM80_IS_VT3 (1<<3) /* limit exceeded for Voltage 3 */ +#define LM80_IS_VT4 (1<<4) /* limit exceeded for Voltage 4 */ +#define LM80_IS_VT5 (1<<5) /* limit exceeded for Voltage 5 */ +#define LM80_IS_VT6 (1<<6) /* limit exceeded for Voltage 6 */ +#define LM80_IS_INT_IN (1<<7) /* state of INT_IN# */ + +/* LM80_ISRC_2 Interrupt Status Register 2 */ +/* LM80_IMSK_2 Interrupt Mask Register 2 */ +#define LM80_IS_TEMP (1<<0) /* HOT temperature limit exceeded */ +#define LM80_IS_BTI (1<<1) /* state of BTI# pin */ +#define LM80_IS_FAN1 (1<<2) /* count limit exceeded for Fan 1 */ +#define LM80_IS_FAN2 (1<<3) /* count limit exceeded for Fan 2 */ +#define LM80_IS_CI (1<<4) /* Chassis Intrusion occured */ +#define LM80_IS_OS (1<<5) /* OS temperature limit exceeded */ + /* bit 6 and 7 are reserved in LM80_ISRC_2 */ +#define LM80_IS_HT_IRQ_MD (1<<6) /* Hot temperature interrupt mode */ +#define LM80_IS_OT_IRQ_MD (1<<7) /* OS temperature interrupt mode */ + +/* LM80_FAN_CTRL Fan Devisor/RST#/OS# Register */ +#define LM80_FAN1_MD_SEL (1<<0) /* Fan 1 mode select */ +#define LM80_FAN2_MD_SEL (1<<1) /* Fan 2 mode select */ +#define LM80_FAN1_PRM_CTL (3<<2) /* Fan 1 speed control */ +#define LM80_FAN2_PRM_CTL (3<<4) /* Fan 2 speed control */ +#define LM80_FAN_OS_ENA (1<<6) /* enable OS mode on RST_OUT#/OS# pins*/ +#define LM80_FAN_RST_ENA (1<<7) /* sets RST_OUT#/OS# pins in RST mode */ + +/* LM80_TEMP_CTRL OS# Config, Temp Res. Reg */ +#define LM80_TEMP_OS_STAT (1<<0) /* mirrors the state of RST_OUT#/OS# */ +#define LM80_TEMP_OS_POL (1<<1) /* select OS# polarity */ +#define LM80_TEMP_OS_MODE (1<<2) /* selects Interrupt mode */ +#define LM80_TEMP_RES (1<<3) /* selects 9 or 11 bit temp resulution*/ +#define LM80_TEMP_LSB (0xf<<4)/* 4 LSBs of 11 bit temp data */ +#define LM80_TEMP_LSB_9 (1<<7) /* LSB of 9 bit temperature data */ + + /* 0x07 - 0x1f reserved */ +/* LM80_VT0_IN current Voltage 0 value */ +/* LM80_VT1_IN current Voltage 1 value */ +/* LM80_VT2_IN current Voltage 2 value */ +/* LM80_VT3_IN current Voltage 3 value */ +/* LM80_VT4_IN current Voltage 4 value */ +/* LM80_VT5_IN current Voltage 5 value */ +/* LM80_VT6_IN current Voltage 6 value */ +/* LM80_TEMP_IN current temperature value */ +/* LM80_FAN1_IN current Fan 1 count */ +/* LM80_FAN2_IN current Fan 2 count */ +/* LM80_VT0_HIGH_LIM high limit val for Voltage 0 */ +/* LM80_VT0_LOW_LIM low limit val for Voltage 0 */ +/* LM80_VT1_HIGH_LIM high limit val for Voltage 1 */ +/* LM80_VT1_LOW_LIM low limit val for Voltage 1 */ +/* LM80_VT2_HIGH_LIM high limit val for Voltage 2 */ +/* LM80_VT2_LOW_LIM low limit val for Voltage 2 */ +/* LM80_VT3_HIGH_LIM high limit val for Voltage 3 */ +/* LM80_VT3_LOW_LIM low limit val for Voltage 3 */ +/* LM80_VT4_HIGH_LIM high limit val for Voltage 4 */ +/* LM80_VT4_LOW_LIM low limit val for Voltage 4 */ +/* LM80_VT5_HIGH_LIM high limit val for Voltage 5 */ +/* LM80_VT5_LOW_LIM low limit val for Voltage 5 */ +/* LM80_VT6_HIGH_LIM high limit val for Voltage 6 */ +/* LM80_VT6_LOW_LIM low limit val for Voltage 6 */ +/* LM80_THOT_LIM_UP hot temperature limit (high) */ +/* LM80_THOT_LIM_LO hot temperature limit (low) */ +/* LM80_TOS_LIM_UP OS temperature limit (high) */ +/* LM80_TOS_LIM_LO OS temperature limit (low) */ +/* LM80_FAN1_COUNT_LIM Fan 1 count limit (high) */ +/* LM80_FAN2_COUNT_LIM Fan 2 count limit (low) */ + /* 0x3e - 0x3f reserved */ + +#define LM80_ADDR 0x28 /* LM80 default addr */ + +/* typedefs *******************************************************************/ + + +/* function prototypes ********************************************************/ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_LM80_H */ diff --git a/drivers/net/sk98lin/h/skaddr.h b/drivers/net/sk98lin/h/skaddr.h new file mode 100644 index 00000000000..423ad063d09 --- /dev/null +++ b/drivers/net/sk98lin/h/skaddr.h @@ -0,0 +1,285 @@ +/****************************************************************************** + * + * Name: skaddr.h + * Project: Gigabit Ethernet Adapters, ADDR-Modul + * Version: $Revision: 1.29 $ + * Date: $Date: 2003/05/13 16:57:24 $ + * Purpose: Header file for Address Management (MC, UC, Prom). + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This module is intended to manage multicast addresses and promiscuous mode + * on GEnesis adapters. + * + * Include File Hierarchy: + * + * "skdrv1st.h" + * ... + * "sktypes.h" + * "skqueue.h" + * "skaddr.h" + * ... + * "skdrv2nd.h" + * + ******************************************************************************/ + +#ifndef __INC_SKADDR_H +#define __INC_SKADDR_H + +#ifdef __cplusplus +extern "C" { +#endif /* cplusplus */ + +/* defines ********************************************************************/ + +#define SK_MAC_ADDR_LEN 6 /* Length of MAC address. */ +#define SK_MAX_ADDRS 14 /* #Addrs for exact match. */ + +/* ----- Common return values ----- */ + +#define SK_ADDR_SUCCESS 0 /* Function returned successfully. */ +#define SK_ADDR_ILLEGAL_PORT 100 /* Port number too high. */ +#define SK_ADDR_TOO_EARLY 101 /* Function called too early. */ + +/* ----- Clear/Add flag bits ----- */ + +#define SK_ADDR_PERMANENT 1 /* RLMT Address */ + +/* ----- Additional Clear flag bits ----- */ + +#define SK_MC_SW_ONLY 2 /* Do not update HW when clearing. */ + +/* ----- Override flag bits ----- */ + +#define SK_ADDR_LOGICAL_ADDRESS 0 +#define SK_ADDR_VIRTUAL_ADDRESS (SK_ADDR_LOGICAL_ADDRESS) /* old */ +#define SK_ADDR_PHYSICAL_ADDRESS 1 +#define SK_ADDR_CLEAR_LOGICAL 2 +#define SK_ADDR_SET_LOGICAL 4 + +/* ----- Override return values ----- */ + +#define SK_ADDR_OVERRIDE_SUCCESS (SK_ADDR_SUCCESS) +#define SK_ADDR_DUPLICATE_ADDRESS 1 +#define SK_ADDR_MULTICAST_ADDRESS 2 + +/* ----- Partitioning of excact match table ----- */ + +#define SK_ADDR_EXACT_MATCHES 16 /* #Exact match entries. */ + +#define SK_ADDR_FIRST_MATCH_RLMT 1 +#define SK_ADDR_LAST_MATCH_RLMT 2 +#define SK_ADDR_FIRST_MATCH_DRV 3 +#define SK_ADDR_LAST_MATCH_DRV (SK_ADDR_EXACT_MATCHES - 1) + +/* ----- SkAddrMcAdd/SkAddrMcUpdate return values ----- */ + +#define SK_MC_FILTERING_EXACT 0 /* Exact filtering. */ +#define SK_MC_FILTERING_INEXACT 1 /* Inexact filtering. */ + +/* ----- Additional SkAddrMcAdd return values ----- */ + +#define SK_MC_ILLEGAL_ADDRESS 2 /* Illegal address. */ +#define SK_MC_ILLEGAL_PORT 3 /* Illegal port (not the active one). */ +#define SK_MC_RLMT_OVERFLOW 4 /* Too many RLMT mc addresses. */ + +/* Promiscuous mode bits ----- */ + +#define SK_PROM_MODE_NONE 0 /* Normal receive. */ +#define SK_PROM_MODE_LLC 1 /* Receive all LLC frames. */ +#define SK_PROM_MODE_ALL_MC 2 /* Receive all multicast frames. */ +/* #define SK_PROM_MODE_NON_LLC 4 */ /* Receive all non-LLC frames. */ + +/* Macros */ + +#ifdef OLD_STUFF +#ifndef SK_ADDR_EQUAL +/* + * "&" instead of "&&" allows better optimization on IA-64. + * The replacement is safe here, as all bytes exist. + */ +#ifndef SK_ADDR_DWORD_COMPARE +#define SK_ADDR_EQUAL(A1,A2) ( \ + (((SK_U8 *)(A1))[5] == ((SK_U8 *)(A2))[5]) & \ + (((SK_U8 *)(A1))[4] == ((SK_U8 *)(A2))[4]) & \ + (((SK_U8 *)(A1))[3] == ((SK_U8 *)(A2))[3]) & \ + (((SK_U8 *)(A1))[2] == ((SK_U8 *)(A2))[2]) & \ + (((SK_U8 *)(A1))[1] == ((SK_U8 *)(A2))[1]) & \ + (((SK_U8 *)(A1))[0] == ((SK_U8 *)(A2))[0])) +#else /* SK_ADDR_DWORD_COMPARE */ +#define SK_ADDR_EQUAL(A1,A2) ( \ + (*(SK_U32 *)&(((SK_U8 *)(A1))[2]) == *(SK_U32 *)&(((SK_U8 *)(A2))[2])) & \ + (*(SK_U32 *)&(((SK_U8 *)(A1))[0]) == *(SK_U32 *)&(((SK_U8 *)(A2))[0]))) +#endif /* SK_ADDR_DWORD_COMPARE */ +#endif /* SK_ADDR_EQUAL */ +#endif /* 0 */ + +#ifndef SK_ADDR_EQUAL +#ifndef SK_ADDR_DWORD_COMPARE +#define SK_ADDR_EQUAL(A1,A2) ( \ + (((SK_U8 SK_FAR *)(A1))[5] == ((SK_U8 SK_FAR *)(A2))[5]) & \ + (((SK_U8 SK_FAR *)(A1))[4] == ((SK_U8 SK_FAR *)(A2))[4]) & \ + (((SK_U8 SK_FAR *)(A1))[3] == ((SK_U8 SK_FAR *)(A2))[3]) & \ + (((SK_U8 SK_FAR *)(A1))[2] == ((SK_U8 SK_FAR *)(A2))[2]) & \ + (((SK_U8 SK_FAR *)(A1))[1] == ((SK_U8 SK_FAR *)(A2))[1]) & \ + (((SK_U8 SK_FAR *)(A1))[0] == ((SK_U8 SK_FAR *)(A2))[0])) +#else /* SK_ADDR_DWORD_COMPARE */ +#define SK_ADDR_EQUAL(A1,A2) ( \ + (*(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[4]) == \ + *(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[4])) && \ + (*(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[0]) == \ + *(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[0]))) +#endif /* SK_ADDR_DWORD_COMPARE */ +#endif /* SK_ADDR_EQUAL */ + +/* typedefs *******************************************************************/ + +typedef struct s_MacAddr { + SK_U8 a[SK_MAC_ADDR_LEN]; +} SK_MAC_ADDR; + + +/* SK_FILTER is used to ensure alignment of the filter. */ +typedef union s_InexactFilter { + SK_U8 Bytes[8]; + SK_U64 Val; /* Dummy entry for alignment only. */ +} SK_FILTER64; + + +typedef struct s_AddrNet SK_ADDR_NET; + + +typedef struct s_AddrPort { + +/* ----- Public part (read-only) ----- */ + + SK_MAC_ADDR CurrentMacAddress; /* Current physical MAC Address. */ + SK_MAC_ADDR PermanentMacAddress; /* Permanent physical MAC Address. */ + int PromMode; /* Promiscuous Mode. */ + +/* ----- Private part ----- */ + + SK_MAC_ADDR PreviousMacAddress; /* Prev. phys. MAC Address. */ + SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */ + SK_U8 Align01; + + SK_U32 FirstExactMatchRlmt; + SK_U32 NextExactMatchRlmt; + SK_U32 FirstExactMatchDrv; + SK_U32 NextExactMatchDrv; + SK_MAC_ADDR Exact[SK_ADDR_EXACT_MATCHES]; + SK_FILTER64 InexactFilter; /* For 64-bit hash register. */ + SK_FILTER64 InexactRlmtFilter; /* For 64-bit hash register. */ + SK_FILTER64 InexactDrvFilter; /* For 64-bit hash register. */ +} SK_ADDR_PORT; + + +struct s_AddrNet { +/* ----- Public part (read-only) ----- */ + + SK_MAC_ADDR CurrentMacAddress; /* Logical MAC Address. */ + SK_MAC_ADDR PermanentMacAddress; /* Logical MAC Address. */ + +/* ----- Private part ----- */ + + SK_U32 ActivePort; /* View of module ADDR. */ + SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */ + SK_U8 Align01; + SK_U16 Align02; +}; + + +typedef struct s_Addr { + +/* ----- Public part (read-only) ----- */ + + SK_ADDR_NET Net[SK_MAX_NETS]; + SK_ADDR_PORT Port[SK_MAX_MACS]; + +/* ----- Private part ----- */ +} SK_ADDR; + +/* function prototypes ********************************************************/ + +#ifndef SK_KR_PROTO + +/* Functions provided by SkAddr */ + +/* ANSI/C++ compliant function prototypes */ + +extern int SkAddrInit( + SK_AC *pAC, + SK_IOC IoC, + int Level); + +extern int SkAddrMcClear( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + int Flags); + +extern int SkAddrMcAdd( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + SK_MAC_ADDR *pMc, + int Flags); + +extern int SkAddrMcUpdate( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber); + +extern int SkAddrOverride( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + SK_MAC_ADDR SK_FAR *pNewAddr, + int Flags); + +extern int SkAddrPromiscuousChange( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + int NewPromMode); + +#ifndef SK_SLIM +extern int SkAddrSwap( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 FromPortNumber, + SK_U32 ToPortNumber); +#endif + +#else /* defined(SK_KR_PROTO)) */ + +/* Non-ANSI/C++ compliant function prototypes */ + +#error KR-style prototypes are not yet provided. + +#endif /* defined(SK_KR_PROTO)) */ + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_SKADDR_H */ diff --git a/drivers/net/sk98lin/h/skcsum.h b/drivers/net/sk98lin/h/skcsum.h new file mode 100644 index 00000000000..6e256bd9a28 --- /dev/null +++ b/drivers/net/sk98lin/h/skcsum.h @@ -0,0 +1,213 @@ +/****************************************************************************** + * + * Name: skcsum.h + * Project: GEnesis - SysKonnect SK-NET Gigabit Ethernet (SK-98xx) + * Version: $Revision: 1.10 $ + * Date: $Date: 2003/08/20 13:59:57 $ + * Purpose: Store/verify Internet checksum in send/receive packets. + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2001 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * Public header file for the "GEnesis" common module "CSUM". + * + * "GEnesis" is an abbreviation of "Gigabit Ethernet Network System in Silicon" + * and is the code name of this SysKonnect project. + * + * Compilation Options: + * + * SK_USE_CSUM - Define if CSUM is to be used. Otherwise, CSUM will be an + * empty module. + * + * SKCS_OVERWRITE_PROTO - Define to overwrite the default protocol id + * definitions. In this case, all SKCS_PROTO_xxx definitions must be made + * external. + * + * SKCS_OVERWRITE_STATUS - Define to overwrite the default return status + * definitions. In this case, all SKCS_STATUS_xxx definitions must be made + * external. + * + * Include File Hierarchy: + * + * "h/skcsum.h" + * "h/sktypes.h" + * "h/skqueue.h" + * + ******************************************************************************/ + +#ifndef __INC_SKCSUM_H +#define __INC_SKCSUM_H + +#include "h/sktypes.h" +#include "h/skqueue.h" + +/* defines ********************************************************************/ + +/* + * Define the default bit flags for 'SKCS_PACKET_INFO.ProtocolFlags' if no user + * overwrite. + */ +#ifndef SKCS_OVERWRITE_PROTO /* User overwrite? */ +#define SKCS_PROTO_IP 0x1 /* IP (Internet Protocol version 4) */ +#define SKCS_PROTO_TCP 0x2 /* TCP (Transmission Control Protocol) */ +#define SKCS_PROTO_UDP 0x4 /* UDP (User Datagram Protocol) */ + +/* Indices for protocol statistics. */ +#define SKCS_PROTO_STATS_IP 0 +#define SKCS_PROTO_STATS_UDP 1 +#define SKCS_PROTO_STATS_TCP 2 +#define SKCS_NUM_PROTOCOLS 3 /* Number of supported protocols. */ +#endif /* !SKCS_OVERWRITE_PROTO */ + +/* + * Define the default SKCS_STATUS type and values if no user overwrite. + * + * SKCS_STATUS_UNKNOWN_IP_VERSION - Not an IP v4 frame. + * SKCS_STATUS_IP_CSUM_ERROR - IP checksum error. + * SKCS_STATUS_IP_CSUM_ERROR_TCP - IP checksum error in TCP frame. + * SKCS_STATUS_IP_CSUM_ERROR_UDP - IP checksum error in UDP frame + * SKCS_STATUS_IP_FRAGMENT - IP fragment (IP checksum ok). + * SKCS_STATUS_IP_CSUM_OK - IP checksum ok (not a TCP or UDP frame). + * SKCS_STATUS_TCP_CSUM_ERROR - TCP checksum error (IP checksum ok). + * SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok). + * SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok. + * SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok. + * SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum. + */ +#ifndef SKCS_OVERWRITE_STATUS /* User overwrite? */ +#define SKCS_STATUS int /* Define status type. */ + +#define SKCS_STATUS_UNKNOWN_IP_VERSION 1 +#define SKCS_STATUS_IP_CSUM_ERROR 2 +#define SKCS_STATUS_IP_FRAGMENT 3 +#define SKCS_STATUS_IP_CSUM_OK 4 +#define SKCS_STATUS_TCP_CSUM_ERROR 5 +#define SKCS_STATUS_UDP_CSUM_ERROR 6 +#define SKCS_STATUS_TCP_CSUM_OK 7 +#define SKCS_STATUS_UDP_CSUM_OK 8 +/* needed for Microsoft */ +#define SKCS_STATUS_IP_CSUM_ERROR_UDP 9 +#define SKCS_STATUS_IP_CSUM_ERROR_TCP 10 +/* UDP checksum may be omitted */ +#define SKCS_STATUS_IP_CSUM_OK_NO_UDP 11 +#endif /* !SKCS_OVERWRITE_STATUS */ + +/* Clear protocol statistics event. */ +#define SK_CSUM_EVENT_CLEAR_PROTO_STATS 1 + +/* + * Add two values in one's complement. + * + * Note: One of the two input values may be "longer" than 16-bit, but then the + * resulting sum may be 17 bits long. In this case, add zero to the result using + * SKCS_OC_ADD() again. + * + * Result = Value1 + Value2 + */ +#define SKCS_OC_ADD(Result, Value1, Value2) { \ + unsigned long Sum; \ + \ + Sum = (unsigned long) (Value1) + (unsigned long) (Value2); \ + /* Add-in any carry. */ \ + (Result) = (Sum & 0xffff) + (Sum >> 16); \ +} + +/* + * Subtract two values in one's complement. + * + * Result = Value1 - Value2 + */ +#define SKCS_OC_SUB(Result, Value1, Value2) \ + SKCS_OC_ADD((Result), (Value1), ~(Value2) & 0xffff) + +/* typedefs *******************************************************************/ + +/* + * SKCS_PROTO_STATS - The CSUM protocol statistics structure. + * + * There is one instance of this structure for each protocol supported. + */ +typedef struct s_CsProtocolStatistics { + SK_U64 RxOkCts; /* Receive checksum ok. */ + SK_U64 RxUnableCts; /* Unable to verify receive checksum. */ + SK_U64 RxErrCts; /* Receive checksum error. */ + SK_U64 TxOkCts; /* Transmit checksum ok. */ + SK_U64 TxUnableCts; /* Unable to calculate checksum in hw. */ +} SKCS_PROTO_STATS; + +/* + * s_Csum - The CSUM module context structure. + */ +typedef struct s_Csum { + /* Enabled receive SK_PROTO_XXX bit flags. */ + unsigned ReceiveFlags[SK_MAX_NETS]; +#ifdef TX_CSUM + unsigned TransmitFlags[SK_MAX_NETS]; +#endif /* TX_CSUM */ + + /* The protocol statistics structure; one per supported protocol. */ + SKCS_PROTO_STATS ProtoStats[SK_MAX_NETS][SKCS_NUM_PROTOCOLS]; +} SK_CSUM; + +/* + * SKCS_PACKET_INFO - The packet information structure. + */ +typedef struct s_CsPacketInfo { + /* Bit field specifiying the desired/found protocols. */ + unsigned ProtocolFlags; + + /* Length of complete IP header, including any option fields. */ + unsigned IpHeaderLength; + + /* IP header checksum. */ + unsigned IpHeaderChecksum; + + /* TCP/UDP pseudo header checksum. */ + unsigned PseudoHeaderChecksum; +} SKCS_PACKET_INFO; + +/* function prototypes ********************************************************/ + +#ifndef SK_CS_CALCULATE_CHECKSUM +extern unsigned SkCsCalculateChecksum( + void *pData, + unsigned Length); +#endif /* SK_CS_CALCULATE_CHECKSUM */ + +extern int SkCsEvent( + SK_AC *pAc, + SK_IOC Ioc, + SK_U32 Event, + SK_EVPARA Param); + +extern SKCS_STATUS SkCsGetReceiveInfo( + SK_AC *pAc, + void *pIpHeader, + unsigned Checksum1, + unsigned Checksum2, + int NetNumber); + +extern void SkCsSetReceiveFlags( + SK_AC *pAc, + unsigned ReceiveFlags, + unsigned *pChecksum1Offset, + unsigned *pChecksum2Offset, + int NetNumber); + +#endif /* __INC_SKCSUM_H */ diff --git a/drivers/net/sk98lin/h/skdebug.h b/drivers/net/sk98lin/h/skdebug.h new file mode 100644 index 00000000000..3cba171d74b --- /dev/null +++ b/drivers/net/sk98lin/h/skdebug.h @@ -0,0 +1,74 @@ +/****************************************************************************** + * + * Name: skdebug.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.14 $ + * Date: $Date: 2003/05/13 17:26:00 $ + * Purpose: SK specific DEBUG support + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef __INC_SKDEBUG_H +#define __INC_SKDEBUG_H + +#ifdef DEBUG +#ifndef SK_DBG_MSG +#define SK_DBG_MSG(pAC,comp,cat,arg) \ + if ( ((comp) & SK_DBG_CHKMOD(pAC)) && \ + ((cat) & SK_DBG_CHKCAT(pAC)) ) { \ + SK_DBG_PRINTF arg ; \ + } +#endif +#else +#define SK_DBG_MSG(pAC,comp,lev,arg) +#endif + +/* PLS NOTE: + * ========= + * Due to any restrictions of kernel printf routines do not use other + * format identifiers as: %x %d %c %s . + * Never use any combined format identifiers such as: %lx %ld in your + * printf - argument (arg) because some OS specific kernel printfs may + * only support some basic identifiers. + */ + +/* Debug modules */ + +#define SK_DBGMOD_MERR 0x00000001L /* general module error indication */ +#define SK_DBGMOD_HWM 0x00000002L /* Hardware init module */ +#define SK_DBGMOD_RLMT 0x00000004L /* RLMT module */ +#define SK_DBGMOD_VPD 0x00000008L /* VPD module */ +#define SK_DBGMOD_I2C 0x00000010L /* I2C module */ +#define SK_DBGMOD_PNMI 0x00000020L /* PNMI module */ +#define SK_DBGMOD_CSUM 0x00000040L /* CSUM module */ +#define SK_DBGMOD_ADDR 0x00000080L /* ADDR module */ +#define SK_DBGMOD_PECP 0x00000100L /* PECP module */ +#define SK_DBGMOD_POWM 0x00000200L /* Power Management module */ + +/* Debug events */ + +#define SK_DBGCAT_INIT 0x00000001L /* module/driver initialization */ +#define SK_DBGCAT_CTRL 0x00000002L /* controlling devices */ +#define SK_DBGCAT_ERR 0x00000004L /* error handling paths */ +#define SK_DBGCAT_TX 0x00000008L /* transmit path */ +#define SK_DBGCAT_RX 0x00000010L /* receive path */ +#define SK_DBGCAT_IRQ 0x00000020L /* general IRQ handling */ +#define SK_DBGCAT_QUEUE 0x00000040L /* any queue management */ +#define SK_DBGCAT_DUMP 0x00000080L /* large data output e.g. hex dump */ +#define SK_DBGCAT_FATAL 0x00000100L /* fatal error */ + +#endif /* __INC_SKDEBUG_H */ diff --git a/drivers/net/sk98lin/h/skdrv1st.h b/drivers/net/sk98lin/h/skdrv1st.h new file mode 100644 index 00000000000..91b8d4f4590 --- /dev/null +++ b/drivers/net/sk98lin/h/skdrv1st.h @@ -0,0 +1,188 @@ +/****************************************************************************** + * + * Name: skdrv1st.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.4 $ + * Date: $Date: 2003/11/12 14:28:14 $ + * Purpose: First header file for driver and all other modules + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This is the first include file of the driver, which includes all + * neccessary system header files and some of the GEnesis header files. + * It also defines some basic items. + * + * Include File Hierarchy: + * + * see skge.c + * + ******************************************************************************/ + +#ifndef __INC_SKDRV1ST_H +#define __INC_SKDRV1ST_H + +typedef struct s_AC SK_AC; + +/* Set card versions */ +#define SK_FAR + +/* override some default functions with optimized linux functions */ + +#define SK_PNMI_STORE_U16(p,v) memcpy((char*)(p),(char*)&(v),2) +#define SK_PNMI_STORE_U32(p,v) memcpy((char*)(p),(char*)&(v),4) +#define SK_PNMI_STORE_U64(p,v) memcpy((char*)(p),(char*)&(v),8) +#define SK_PNMI_READ_U16(p,v) memcpy((char*)&(v),(char*)(p),2) +#define SK_PNMI_READ_U32(p,v) memcpy((char*)&(v),(char*)(p),4) +#define SK_PNMI_READ_U64(p,v) memcpy((char*)&(v),(char*)(p),8) + +#define SK_ADDR_EQUAL(a1,a2) (!memcmp(a1,a2,6)) + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define SK_CS_CALCULATE_CHECKSUM +#ifndef CONFIG_X86_64 +#define SkCsCalculateChecksum(p,l) ((~ip_compute_csum(p, l)) & 0xffff) +#else +#define SkCsCalculateChecksum(p,l) ((~ip_fast_csum(p, l)) & 0xffff) +#endif + +#include "h/sktypes.h" +#include "h/skerror.h" +#include "h/skdebug.h" +#include "h/lm80.h" +#include "h/xmac_ii.h" + +#ifdef __LITTLE_ENDIAN +#define SK_LITTLE_ENDIAN +#else +#define SK_BIG_ENDIAN +#endif + +#define SK_NET_DEVICE net_device + + +/* we use gethrtime(), return unit: nanoseconds */ +#define SK_TICKS_PER_SEC 100 + +#define SK_MEM_MAPPED_IO + +// #define SK_RLMT_SLOW_LOOKAHEAD + +#define SK_MAX_MACS 2 +#define SK_MAX_NETS 2 + +#define SK_IOC char __iomem * + +typedef struct s_DrvRlmtMbuf SK_MBUF; + +#define SK_CONST64 INT64_C +#define SK_CONSTU64 UINT64_C + +#define SK_MEMCPY(dest,src,size) memcpy(dest,src,size) +#define SK_MEMCMP(s1,s2,size) memcmp(s1,s2,size) +#define SK_MEMSET(dest,val,size) memset(dest,val,size) +#define SK_STRLEN(pStr) strlen((char*)(pStr)) +#define SK_STRNCPY(pDest,pSrc,size) strncpy((char*)(pDest),(char*)(pSrc),size) +#define SK_STRCMP(pStr1,pStr2) strcmp((char*)(pStr1),(char*)(pStr2)) + +/* macros to access the adapter */ +#define SK_OUT8(b,a,v) writeb((v), ((b)+(a))) +#define SK_OUT16(b,a,v) writew((v), ((b)+(a))) +#define SK_OUT32(b,a,v) writel((v), ((b)+(a))) +#define SK_IN8(b,a,pv) (*(pv) = readb((b)+(a))) +#define SK_IN16(b,a,pv) (*(pv) = readw((b)+(a))) +#define SK_IN32(b,a,pv) (*(pv) = readl((b)+(a))) + +#define int8_t char +#define int16_t short +#define int32_t long +#define int64_t long long +#define uint8_t u_char +#define uint16_t u_short +#define uint32_t u_long +#define uint64_t unsigned long long +#define t_scalar_t int +#define t_uscalar_t unsigned int +#define uintptr_t unsigned long + +#define __CONCAT__(A,B) A##B + +#define INT32_C(a) __CONCAT__(a,L) +#define INT64_C(a) __CONCAT__(a,LL) +#define UINT32_C(a) __CONCAT__(a,UL) +#define UINT64_C(a) __CONCAT__(a,ULL) + +#ifdef DEBUG +#define SK_DBG_PRINTF printk +#ifndef SK_DEBUG_CHKMOD +#define SK_DEBUG_CHKMOD 0 +#endif +#ifndef SK_DEBUG_CHKCAT +#define SK_DEBUG_CHKCAT 0 +#endif +/* those come from the makefile */ +#define SK_DBG_CHKMOD(pAC) (SK_DEBUG_CHKMOD) +#define SK_DBG_CHKCAT(pAC) (SK_DEBUG_CHKCAT) + +extern void SkDbgPrintf(const char *format,...); + +#define SK_DBGMOD_DRV 0x00010000 + +/**** possible driver debug categories ********************************/ +#define SK_DBGCAT_DRV_ENTRY 0x00010000 +#define SK_DBGCAT_DRV_SAP 0x00020000 +#define SK_DBGCAT_DRV_MCA 0x00040000 +#define SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 +#define SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 +#define SK_DBGCAT_DRV_PROGRESS 0x00200000 +#define SK_DBGCAT_DRV_MSG 0x00400000 +#define SK_DBGCAT_DRV_PROM 0x00800000 +#define SK_DBGCAT_DRV_TX_FRAME 0x01000000 +#define SK_DBGCAT_DRV_ERROR 0x02000000 +#define SK_DBGCAT_DRV_INT_SRC 0x04000000 +#define SK_DBGCAT_DRV_EVENT 0x08000000 + +#endif + +#define SK_ERR_LOG SkErrorLog + +extern void SkErrorLog(SK_AC*, int, int, char*); + +#endif + diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h new file mode 100644 index 00000000000..3fa67171e83 --- /dev/null +++ b/drivers/net/sk98lin/h/skdrv2nd.h @@ -0,0 +1,447 @@ +/****************************************************************************** + * + * Name: skdrv2nd.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.10 $ + * Date: $Date: 2003/12/11 16:04:45 $ + * Purpose: Second header file for driver and all other modules + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This is the second include file of the driver, which includes all other + * neccessary files and defines all structures and constants used by the + * driver and the common modules. + * + * Include File Hierarchy: + * + * see skge.c + * + ******************************************************************************/ + +#ifndef __INC_SKDRV2ND_H +#define __INC_SKDRV2ND_H + +#include "h/skqueue.h" +#include "h/skgehwt.h" +#include "h/sktimer.h" +#include "h/ski2c.h" +#include "h/skgepnmi.h" +#include "h/skvpd.h" +#include "h/skgehw.h" +#include "h/skgeinit.h" +#include "h/skaddr.h" +#include "h/skgesirq.h" +#include "h/skcsum.h" +#include "h/skrlmt.h" +#include "h/skgedrv.h" + + +extern SK_MBUF *SkDrvAllocRlmtMbuf(SK_AC*, SK_IOC, unsigned); +extern void SkDrvFreeRlmtMbuf(SK_AC*, SK_IOC, SK_MBUF*); +extern SK_U64 SkOsGetTime(SK_AC*); +extern int SkPciReadCfgDWord(SK_AC*, int, SK_U32*); +extern int SkPciReadCfgWord(SK_AC*, int, SK_U16*); +extern int SkPciReadCfgByte(SK_AC*, int, SK_U8*); +extern int SkPciWriteCfgWord(SK_AC*, int, SK_U16); +extern int SkPciWriteCfgByte(SK_AC*, int, SK_U8); +extern int SkDrvEvent(SK_AC*, SK_IOC IoC, SK_U32, SK_EVPARA); + +#ifdef SK_DIAG_SUPPORT +extern int SkDrvEnterDiagMode(SK_AC *pAc); +extern int SkDrvLeaveDiagMode(SK_AC *pAc); +#endif + +struct s_DrvRlmtMbuf { + SK_MBUF *pNext; /* Pointer to next RLMT Mbuf. */ + SK_U8 *pData; /* Data buffer (virtually contig.). */ + unsigned Size; /* Data buffer size. */ + unsigned Length; /* Length of packet (<= Size). */ + SK_U32 PortIdx; /* Receiving/transmitting port. */ +#ifdef SK_RLMT_MBUF_PRIVATE + SK_RLMT_MBUF Rlmt; /* Private part for RLMT. */ +#endif /* SK_RLMT_MBUF_PRIVATE */ + struct sk_buff *pOs; /* Pointer to message block */ +}; + + +/* + * Time macros + */ +#if SK_TICKS_PER_SEC == 100 +#define SK_PNMI_HUNDREDS_SEC(t) (t) +#else +#define SK_PNMI_HUNDREDS_SEC(t) ((((unsigned long)t) * 100) / \ + (SK_TICKS_PER_SEC)) +#endif + +/* + * New SkOsGetTime + */ +#define SkOsGetTimeCurrent(pAC, pUsec) {\ + struct timeval t;\ + do_gettimeofday(&t);\ + *pUsec = ((((t.tv_sec) * 1000000L)+t.tv_usec)/10000);\ +} + + +/* + * ioctl definitions + */ +#define SK_IOCTL_BASE (SIOCDEVPRIVATE) +#define SK_IOCTL_GETMIB (SK_IOCTL_BASE + 0) +#define SK_IOCTL_SETMIB (SK_IOCTL_BASE + 1) +#define SK_IOCTL_PRESETMIB (SK_IOCTL_BASE + 2) +#define SK_IOCTL_GEN (SK_IOCTL_BASE + 3) +#define SK_IOCTL_DIAG (SK_IOCTL_BASE + 4) + +typedef struct s_IOCTL SK_GE_IOCTL; + +struct s_IOCTL { + char __user * pData; + unsigned int Len; +}; + + +/* + * define sizes of descriptor rings in bytes + */ + +#define TX_RING_SIZE (8*1024) +#define RX_RING_SIZE (24*1024) + +/* + * Buffer size for ethernet packets + */ +#define ETH_BUF_SIZE 1540 +#define ETH_MAX_MTU 1514 +#define ETH_MIN_MTU 60 +#define ETH_MULTICAST_BIT 0x01 +#define SK_JUMBO_MTU 9000 + +/* + * transmit priority selects the queue: LOW=asynchron, HIGH=synchron + */ +#define TX_PRIO_LOW 0 +#define TX_PRIO_HIGH 1 + +/* + * alignment of rx/tx descriptors + */ +#define DESCR_ALIGN 64 + +/* + * definitions for pnmi. TODO + */ +#define SK_DRIVER_RESET(pAC, IoC) 0 +#define SK_DRIVER_SENDEVENT(pAC, IoC) 0 +#define SK_DRIVER_SELFTEST(pAC, IoC) 0 +/* For get mtu you must add an own function */ +#define SK_DRIVER_GET_MTU(pAc,IoC,i) 0 +#define SK_DRIVER_SET_MTU(pAc,IoC,i,v) 0 +#define SK_DRIVER_PRESET_MTU(pAc,IoC,i,v) 0 + +/* +** Interim definition of SK_DRV_TIMER placed in this file until +** common modules have been finalized +*/ +#define SK_DRV_TIMER 11 +#define SK_DRV_MODERATION_TIMER 1 +#define SK_DRV_MODERATION_TIMER_LENGTH 1000000 /* 1 second */ +#define SK_DRV_RX_CLEANUP_TIMER 2 +#define SK_DRV_RX_CLEANUP_TIMER_LENGTH 1000000 /* 100 millisecs */ + +/* +** Definitions regarding transmitting frames +** any calculating any checksum. +*/ +#define C_LEN_ETHERMAC_HEADER_DEST_ADDR 6 +#define C_LEN_ETHERMAC_HEADER_SRC_ADDR 6 +#define C_LEN_ETHERMAC_HEADER_LENTYPE 2 +#define C_LEN_ETHERMAC_HEADER ( (C_LEN_ETHERMAC_HEADER_DEST_ADDR) + \ + (C_LEN_ETHERMAC_HEADER_SRC_ADDR) + \ + (C_LEN_ETHERMAC_HEADER_LENTYPE) ) + +#define C_LEN_ETHERMTU_MINSIZE 46 +#define C_LEN_ETHERMTU_MAXSIZE_STD 1500 +#define C_LEN_ETHERMTU_MAXSIZE_JUMBO 9000 + +#define C_LEN_ETHERNET_MINSIZE ( (C_LEN_ETHERMAC_HEADER) + \ + (C_LEN_ETHERMTU_MINSIZE) ) + +#define C_OFFSET_IPHEADER C_LEN_ETHERMAC_HEADER +#define C_OFFSET_IPHEADER_IPPROTO 9 +#define C_OFFSET_TCPHEADER_TCPCS 16 +#define C_OFFSET_UDPHEADER_UDPCS 6 + +#define C_OFFSET_IPPROTO ( (C_LEN_ETHERMAC_HEADER) + \ + (C_OFFSET_IPHEADER_IPPROTO) ) + +#define C_PROTO_ID_UDP 17 /* refer to RFC 790 or Stevens' */ +#define C_PROTO_ID_TCP 6 /* TCP/IP illustrated for details */ + +/* TX and RX descriptors *****************************************************/ + +typedef struct s_RxD RXD; /* the receive descriptor */ + +struct s_RxD { + volatile SK_U32 RBControl; /* Receive Buffer Control */ + SK_U32 VNextRxd; /* Next receive descriptor,low dword */ + SK_U32 VDataLow; /* Receive buffer Addr, low dword */ + SK_U32 VDataHigh; /* Receive buffer Addr, high dword */ + SK_U32 FrameStat; /* Receive Frame Status word */ + SK_U32 TimeStamp; /* Time stamp from XMAC */ + SK_U32 TcpSums; /* TCP Sum 2 / TCP Sum 1 */ + SK_U32 TcpSumStarts; /* TCP Sum Start 2 / TCP Sum Start 1 */ + RXD *pNextRxd; /* Pointer to next Rxd */ + struct sk_buff *pMBuf; /* Pointer to Linux' socket buffer */ +}; + +typedef struct s_TxD TXD; /* the transmit descriptor */ + +struct s_TxD { + volatile SK_U32 TBControl; /* Transmit Buffer Control */ + SK_U32 VNextTxd; /* Next transmit descriptor,low dword */ + SK_U32 VDataLow; /* Transmit Buffer Addr, low dword */ + SK_U32 VDataHigh; /* Transmit Buffer Addr, high dword */ + SK_U32 FrameStat; /* Transmit Frame Status Word */ + SK_U32 TcpSumOfs; /* Reserved / TCP Sum Offset */ + SK_U16 TcpSumSt; /* TCP Sum Start */ + SK_U16 TcpSumWr; /* TCP Sum Write */ + SK_U32 TcpReserved; /* not used */ + TXD *pNextTxd; /* Pointer to next Txd */ + struct sk_buff *pMBuf; /* Pointer to Linux' socket buffer */ +}; + +/* Used interrupt bits in the interrupts source register *********************/ + +#define DRIVER_IRQS ((IS_IRQ_SW) | \ + (IS_R1_F) |(IS_R2_F) | \ + (IS_XS1_F) |(IS_XA1_F) | \ + (IS_XS2_F) |(IS_XA2_F)) + +#define SPECIAL_IRQS ((IS_HW_ERR) |(IS_I2C_READY) | \ + (IS_EXT_REG) |(IS_TIMINT) | \ + (IS_PA_TO_RX1) |(IS_PA_TO_RX2) | \ + (IS_PA_TO_TX1) |(IS_PA_TO_TX2) | \ + (IS_MAC1) |(IS_LNK_SYNC_M1)| \ + (IS_MAC2) |(IS_LNK_SYNC_M2)| \ + (IS_R1_C) |(IS_R2_C) | \ + (IS_XS1_C) |(IS_XA1_C) | \ + (IS_XS2_C) |(IS_XA2_C)) + +#define IRQ_MASK ((IS_IRQ_SW) | \ + (IS_R1_B) |(IS_R1_F) |(IS_R2_B) |(IS_R2_F) | \ + (IS_XS1_B) |(IS_XS1_F) |(IS_XA1_B)|(IS_XA1_F)| \ + (IS_XS2_B) |(IS_XS2_F) |(IS_XA2_B)|(IS_XA2_F)| \ + (IS_HW_ERR) |(IS_I2C_READY)| \ + (IS_EXT_REG) |(IS_TIMINT) | \ + (IS_PA_TO_RX1) |(IS_PA_TO_RX2)| \ + (IS_PA_TO_TX1) |(IS_PA_TO_TX2)| \ + (IS_MAC1) |(IS_MAC2) | \ + (IS_R1_C) |(IS_R2_C) | \ + (IS_XS1_C) |(IS_XA1_C) | \ + (IS_XS2_C) |(IS_XA2_C)) + +#define IRQ_HWE_MASK (IS_ERR_MSK) /* enable all HW irqs */ + +typedef struct s_DevNet DEV_NET; + +struct s_DevNet { + int PortNr; + int NetNr; + SK_AC *pAC; +}; + +typedef struct s_TxPort TX_PORT; + +struct s_TxPort { + /* the transmit descriptor rings */ + caddr_t pTxDescrRing; /* descriptor area memory */ + SK_U64 VTxDescrRing; /* descr. area bus virt. addr. */ + TXD *pTxdRingHead; /* Head of Tx rings */ + TXD *pTxdRingTail; /* Tail of Tx rings */ + TXD *pTxdRingPrev; /* descriptor sent previously */ + int TxdRingFree; /* # of free entrys */ + spinlock_t TxDesRingLock; /* serialize descriptor accesses */ + SK_IOC HwAddr; /* bmu registers address */ + int PortIndex; /* index number of port (0 or 1) */ +}; + +typedef struct s_RxPort RX_PORT; + +struct s_RxPort { + /* the receive descriptor rings */ + caddr_t pRxDescrRing; /* descriptor area memory */ + SK_U64 VRxDescrRing; /* descr. area bus virt. addr. */ + RXD *pRxdRingHead; /* Head of Rx rings */ + RXD *pRxdRingTail; /* Tail of Rx rings */ + RXD *pRxdRingPrev; /* descriptor given to BMU previously */ + int RxdRingFree; /* # of free entrys */ + int RxCsum; /* use receive checksum hardware */ + spinlock_t RxDesRingLock; /* serialize descriptor accesses */ + int RxFillLimit; /* limit for buffers in ring */ + SK_IOC HwAddr; /* bmu registers address */ + int PortIndex; /* index number of port (0 or 1) */ +}; + +/* Definitions needed for interrupt moderation *******************************/ + +#define IRQ_EOF_AS_TX ((IS_XA1_F) | (IS_XA2_F)) +#define IRQ_EOF_SY_TX ((IS_XS1_F) | (IS_XS2_F)) +#define IRQ_MASK_TX_ONLY ((IRQ_EOF_AS_TX)| (IRQ_EOF_SY_TX)) +#define IRQ_MASK_RX_ONLY ((IS_R1_F) | (IS_R2_F)) +#define IRQ_MASK_SP_ONLY (SPECIAL_IRQS) +#define IRQ_MASK_TX_RX ((IRQ_MASK_TX_ONLY)| (IRQ_MASK_RX_ONLY)) +#define IRQ_MASK_SP_RX ((SPECIAL_IRQS) | (IRQ_MASK_RX_ONLY)) +#define IRQ_MASK_SP_TX ((SPECIAL_IRQS) | (IRQ_MASK_TX_ONLY)) +#define IRQ_MASK_RX_TX_SP ((SPECIAL_IRQS) | (IRQ_MASK_TX_RX)) + +#define C_INT_MOD_NONE 1 +#define C_INT_MOD_STATIC 2 +#define C_INT_MOD_DYNAMIC 4 + +#define C_CLK_FREQ_GENESIS 53215000 /* shorter: 53.125 MHz */ +#define C_CLK_FREQ_YUKON 78215000 /* shorter: 78.125 MHz */ + +#define C_INTS_PER_SEC_DEFAULT 2000 +#define C_INT_MOD_ENABLE_PERCENTAGE 50 /* if higher 50% enable */ +#define C_INT_MOD_DISABLE_PERCENTAGE 50 /* if lower 50% disable */ +#define C_INT_MOD_IPS_LOWER_RANGE 30 +#define C_INT_MOD_IPS_UPPER_RANGE 40000 + + +typedef struct s_DynIrqModInfo DIM_INFO; +struct s_DynIrqModInfo { + unsigned long PrevTimeVal; + unsigned int PrevSysLoad; + unsigned int PrevUsedTime; + unsigned int PrevTotalTime; + int PrevUsedDescrRatio; + int NbrProcessedDescr; + SK_U64 PrevPort0RxIntrCts; + SK_U64 PrevPort1RxIntrCts; + SK_U64 PrevPort0TxIntrCts; + SK_U64 PrevPort1TxIntrCts; + SK_BOOL ModJustEnabled; /* Moderation just enabled yes/no */ + + int MaxModIntsPerSec; /* Moderation Threshold */ + int MaxModIntsPerSecUpperLimit; /* Upper limit for DIM */ + int MaxModIntsPerSecLowerLimit; /* Lower limit for DIM */ + + long MaskIrqModeration; /* ModIrqType (eg. 'TxRx') */ + SK_BOOL DisplayStats; /* Stats yes/no */ + SK_BOOL AutoSizing; /* Resize DIM-timer on/off */ + int IntModTypeSelect; /* EnableIntMod (eg. 'dynamic') */ + + SK_TIMER ModTimer; /* just some timer */ +}; + +typedef struct s_PerStrm PER_STRM; + +#define SK_ALLOC_IRQ 0x00000001 + +#ifdef SK_DIAG_SUPPORT +#define DIAG_ACTIVE 1 +#define DIAG_NOTACTIVE 0 +#endif + +/**************************************************************************** + * Per board structure / Adapter Context structure: + * Allocated within attach(9e) and freed within detach(9e). + * Contains all 'per device' necessary handles, flags, locks etc.: + */ +struct s_AC { + SK_GEINIT GIni; /* GE init struct */ + SK_PNMI Pnmi; /* PNMI data struct */ + SK_VPD vpd; /* vpd data struct */ + SK_QUEUE Event; /* Event queue */ + SK_HWT Hwt; /* Hardware Timer control struct */ + SK_TIMCTRL Tim; /* Software Timer control struct */ + SK_I2C I2c; /* I2C relevant data structure */ + SK_ADDR Addr; /* for Address module */ + SK_CSUM Csum; /* for checksum module */ + SK_RLMT Rlmt; /* for rlmt module */ + spinlock_t SlowPathLock; /* Normal IRQ lock */ + struct timer_list BlinkTimer; /* for LED blinking */ + int LedsOn; + SK_PNMI_STRUCT_DATA PnmiStruct; /* structure to get all Pnmi-Data */ + int RlmtMode; /* link check mode to set */ + int RlmtNets; /* Number of nets */ + + SK_IOC IoBase; /* register set of adapter */ + int BoardLevel; /* level of active hw init (0-2) */ + + SK_U32 AllocFlag; /* flag allocation of resources */ + struct pci_dev *PciDev; /* for access to pci config space */ + struct SK_NET_DEVICE *dev[2]; /* pointer to device struct */ + + int RxBufSize; /* length of receive buffers */ + struct net_device_stats stats; /* linux 'netstat -i' statistics */ + int Index; /* internal board index number */ + + /* adapter RAM sizes for queues of active port */ + int RxQueueSize; /* memory used for receive queue */ + int TxSQueueSize; /* memory used for sync. tx queue */ + int TxAQueueSize; /* memory used for async. tx queue */ + + int PromiscCount; /* promiscuous mode counter */ + int AllMultiCount; /* allmulticast mode counter */ + int MulticCount; /* number of different MC */ + /* addresses for this board */ + /* (may be more than HW can)*/ + + int HWRevision; /* Hardware revision */ + int ActivePort; /* the active XMAC port */ + int MaxPorts; /* number of activated ports */ + int TxDescrPerRing; /* # of descriptors per tx ring */ + int RxDescrPerRing; /* # of descriptors per rx ring */ + + caddr_t pDescrMem; /* Pointer to the descriptor area */ + dma_addr_t pDescrMemDMA; /* PCI DMA address of area */ + + /* the port structures with descriptor rings */ + TX_PORT TxPort[SK_MAX_MACS][2]; + RX_PORT RxPort[SK_MAX_MACS]; + + SK_BOOL CheckQueue; /* check event queue soon */ + SK_TIMER DrvCleanupTimer;/* to check for pending descriptors */ + DIM_INFO DynIrqModInfo; /* all data related to DIM */ + + /* Only for tests */ + int PortDown; + int ChipsetType; /* Chipset family type + * 0 == Genesis family support + * 1 == Yukon family support + */ +#ifdef SK_DIAG_SUPPORT + SK_U32 DiagModeActive; /* is diag active? */ + SK_BOOL DiagFlowCtrl; /* for control purposes */ + SK_PNMI_STRUCT_DATA PnmiBackup; /* backup structure for all Pnmi-Data */ + SK_BOOL WasIfUp[SK_MAX_MACS]; /* for OpenClose while + * DIAG is busy with NIC + */ +#endif + +}; + + +#endif /* __INC_SKDRV2ND_H */ + diff --git a/drivers/net/sk98lin/h/skerror.h b/drivers/net/sk98lin/h/skerror.h new file mode 100644 index 00000000000..da062f76623 --- /dev/null +++ b/drivers/net/sk98lin/h/skerror.h @@ -0,0 +1,55 @@ +/****************************************************************************** + * + * Name: skerror.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.7 $ + * Date: $Date: 2003/05/13 17:25:13 $ + * Purpose: SK specific Error log support + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef _INC_SKERROR_H_ +#define _INC_SKERROR_H_ + +/* + * Define Error Classes + */ +#define SK_ERRCL_OTHER (0) /* Other error */ +#define SK_ERRCL_CONFIG (1L<<0) /* Configuration error */ +#define SK_ERRCL_INIT (1L<<1) /* Initialization error */ +#define SK_ERRCL_NORES (1L<<2) /* Out of Resources error */ +#define SK_ERRCL_SW (1L<<3) /* Internal Software error */ +#define SK_ERRCL_HW (1L<<4) /* Hardware Failure */ +#define SK_ERRCL_COMM (1L<<5) /* Communication error */ + + +/* + * Define Error Code Bases + */ +#define SK_ERRBASE_RLMT 100 /* Base Error number for RLMT */ +#define SK_ERRBASE_HWINIT 200 /* Base Error number for HWInit */ +#define SK_ERRBASE_VPD 300 /* Base Error number for VPD */ +#define SK_ERRBASE_PNMI 400 /* Base Error number for PNMI */ +#define SK_ERRBASE_CSUM 500 /* Base Error number for Checksum */ +#define SK_ERRBASE_SIRQ 600 /* Base Error number for Special IRQ */ +#define SK_ERRBASE_I2C 700 /* Base Error number for I2C module */ +#define SK_ERRBASE_QUEUE 800 /* Base Error number for Scheduler */ +#define SK_ERRBASE_ADDR 900 /* Base Error number for Address module */ +#define SK_ERRBASE_PECP 1000 /* Base Error number for PECP */ +#define SK_ERRBASE_DRV 1100 /* Base Error number for Driver */ + +#endif /* _INC_SKERROR_H_ */ diff --git a/drivers/net/sk98lin/h/skgedrv.h b/drivers/net/sk98lin/h/skgedrv.h new file mode 100644 index 00000000000..44fd4c3de81 --- /dev/null +++ b/drivers/net/sk98lin/h/skgedrv.h @@ -0,0 +1,51 @@ +/****************************************************************************** + * + * Name: skgedrv.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.10 $ + * Date: $Date: 2003/07/04 12:25:01 $ + * Purpose: Interface with the driver + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef __INC_SKGEDRV_H_ +#define __INC_SKGEDRV_H_ + +/* defines ********************************************************************/ + +/* + * Define the driver events. + * Usually the events are defined by the destination module. + * In case of the driver we put the definition of the events here. + */ +#define SK_DRV_PORT_RESET 1 /* The port needs to be reset */ +#define SK_DRV_NET_UP 2 /* The net is operational */ +#define SK_DRV_NET_DOWN 3 /* The net is down */ +#define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links connected */ +#define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */ +#define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */ +#define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */ +#define SK_DRV_PORT_FAIL 8 /* One port fails */ +#define SK_DRV_SWITCH_INTERN 9 /* Port switch by the driver itself */ +#define SK_DRV_POWER_DOWN 10 /* Power down mode */ +#define SK_DRV_TIMER 11 /* Timer for free use */ +#ifdef SK_NO_RLMT +#define SK_DRV_LINK_UP 12 /* Link Up event for driver */ +#define SK_DRV_LINK_DOWN 13 /* Link Down event for driver */ +#endif +#define SK_DRV_DOWNSHIFT_DET 14 /* Downshift 4-Pair / 2-Pair (YUKON only) */ +#endif /* __INC_SKGEDRV_H_ */ diff --git a/drivers/net/sk98lin/h/skgehw.h b/drivers/net/sk98lin/h/skgehw.h new file mode 100644 index 00000000000..f6282b7956d --- /dev/null +++ b/drivers/net/sk98lin/h/skgehw.h @@ -0,0 +1,2126 @@ +/****************************************************************************** + * + * Name: skgehw.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.56 $ + * Date: $Date: 2003/09/23 09:01:00 $ + * Purpose: Defines and Macros for the Gigabit Ethernet Adapter Product Family + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef __INC_SKGEHW_H +#define __INC_SKGEHW_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* defines ********************************************************************/ + +#define BIT_31 (1UL << 31) +#define BIT_30 (1L << 30) +#define BIT_29 (1L << 29) +#define BIT_28 (1L << 28) +#define BIT_27 (1L << 27) +#define BIT_26 (1L << 26) +#define BIT_25 (1L << 25) +#define BIT_24 (1L << 24) +#define BIT_23 (1L << 23) +#define BIT_22 (1L << 22) +#define BIT_21 (1L << 21) +#define BIT_20 (1L << 20) +#define BIT_19 (1L << 19) +#define BIT_18 (1L << 18) +#define BIT_17 (1L << 17) +#define BIT_16 (1L << 16) +#define BIT_15 (1L << 15) +#define BIT_14 (1L << 14) +#define BIT_13 (1L << 13) +#define BIT_12 (1L << 12) +#define BIT_11 (1L << 11) +#define BIT_10 (1L << 10) +#define BIT_9 (1L << 9) +#define BIT_8 (1L << 8) +#define BIT_7 (1L << 7) +#define BIT_6 (1L << 6) +#define BIT_5 (1L << 5) +#define BIT_4 (1L << 4) +#define BIT_3 (1L << 3) +#define BIT_2 (1L << 2) +#define BIT_1 (1L << 1) +#define BIT_0 1L + +#define BIT_15S (1U << 15) +#define BIT_14S (1 << 14) +#define BIT_13S (1 << 13) +#define BIT_12S (1 << 12) +#define BIT_11S (1 << 11) +#define BIT_10S (1 << 10) +#define BIT_9S (1 << 9) +#define BIT_8S (1 << 8) +#define BIT_7S (1 << 7) +#define BIT_6S (1 << 6) +#define BIT_5S (1 << 5) +#define BIT_4S (1 << 4) +#define BIT_3S (1 << 3) +#define BIT_2S (1 << 2) +#define BIT_1S (1 << 1) +#define BIT_0S 1 + +#define SHIFT31(x) ((x) << 31) +#define SHIFT30(x) ((x) << 30) +#define SHIFT29(x) ((x) << 29) +#define SHIFT28(x) ((x) << 28) +#define SHIFT27(x) ((x) << 27) +#define SHIFT26(x) ((x) << 26) +#define SHIFT25(x) ((x) << 25) +#define SHIFT24(x) ((x) << 24) +#define SHIFT23(x) ((x) << 23) +#define SHIFT22(x) ((x) << 22) +#define SHIFT21(x) ((x) << 21) +#define SHIFT20(x) ((x) << 20) +#define SHIFT19(x) ((x) << 19) +#define SHIFT18(x) ((x) << 18) +#define SHIFT17(x) ((x) << 17) +#define SHIFT16(x) ((x) << 16) +#define SHIFT15(x) ((x) << 15) +#define SHIFT14(x) ((x) << 14) +#define SHIFT13(x) ((x) << 13) +#define SHIFT12(x) ((x) << 12) +#define SHIFT11(x) ((x) << 11) +#define SHIFT10(x) ((x) << 10) +#define SHIFT9(x) ((x) << 9) +#define SHIFT8(x) ((x) << 8) +#define SHIFT7(x) ((x) << 7) +#define SHIFT6(x) ((x) << 6) +#define SHIFT5(x) ((x) << 5) +#define SHIFT4(x) ((x) << 4) +#define SHIFT3(x) ((x) << 3) +#define SHIFT2(x) ((x) << 2) +#define SHIFT1(x) ((x) << 1) +#define SHIFT0(x) ((x) << 0) + +/* + * Configuration Space header + * Since this module is used for different OS', those may be + * duplicate on some of them (e.g. Linux). But to keep the + * common source, we have to live with this... + */ +#define PCI_VENDOR_ID 0x00 /* 16 bit Vendor ID */ +#define PCI_DEVICE_ID 0x02 /* 16 bit Device ID */ +#define PCI_COMMAND 0x04 /* 16 bit Command */ +#define PCI_STATUS 0x06 /* 16 bit Status */ +#define PCI_REV_ID 0x08 /* 8 bit Revision ID */ +#define PCI_CLASS_CODE 0x09 /* 24 bit Class Code */ +#define PCI_CACHE_LSZ 0x0c /* 8 bit Cache Line Size */ +#define PCI_LAT_TIM 0x0d /* 8 bit Latency Timer */ +#define PCI_HEADER_T 0x0e /* 8 bit Header Type */ +#define PCI_BIST 0x0f /* 8 bit Built-in selftest */ +#define PCI_BASE_1ST 0x10 /* 32 bit 1st Base address */ +#define PCI_BASE_2ND 0x14 /* 32 bit 2nd Base address */ + /* Byte 0x18..0x2b: reserved */ +#define PCI_SUB_VID 0x2c /* 16 bit Subsystem Vendor ID */ +#define PCI_SUB_ID 0x2e /* 16 bit Subsystem ID */ +#define PCI_BASE_ROM 0x30 /* 32 bit Expansion ROM Base Address */ +#define PCI_CAP_PTR 0x34 /* 8 bit Capabilities Ptr */ + /* Byte 0x35..0x3b: reserved */ +#define PCI_IRQ_LINE 0x3c /* 8 bit Interrupt Line */ +#define PCI_IRQ_PIN 0x3d /* 8 bit Interrupt Pin */ +#define PCI_MIN_GNT 0x3e /* 8 bit Min_Gnt */ +#define PCI_MAX_LAT 0x3f /* 8 bit Max_Lat */ + /* Device Dependent Region */ +#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */ +#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */ + /* Power Management Region */ +#define PCI_PM_CAP_ID 0x48 /* 8 bit Power Management Cap. ID */ +#define PCI_PM_NITEM 0x49 /* 8 bit Next Item Ptr */ +#define PCI_PM_CAP_REG 0x4a /* 16 bit Power Management Capabilities */ +#define PCI_PM_CTL_STS 0x4c /* 16 bit Power Manag. Control/Status */ + /* Byte 0x4e: reserved */ +#define PCI_PM_DAT_REG 0x4f /* 8 bit Power Manag. Data Register */ + /* VPD Region */ +#define PCI_VPD_CAP_ID 0x50 /* 8 bit VPD Cap. ID */ +#define PCI_VPD_NITEM 0x51 /* 8 bit Next Item Ptr */ +#define PCI_VPD_ADR_REG 0x52 /* 16 bit VPD Address Register */ +#define PCI_VPD_DAT_REG 0x54 /* 32 bit VPD Data Register */ + /* Byte 0x58..0x59: reserved */ +#define PCI_SER_LD_CTRL 0x5a /* 16 bit SEEPROM Loader Ctrl (YUKON only) */ + /* Byte 0x5c..0xff: reserved */ + +/* + * I2C Address (PCI Config) + * + * Note: The temperature and voltage sensors are relocated on a different + * I2C bus. + */ +#define I2C_ADDR_VPD 0xa0 /* I2C address for the VPD EEPROM */ + +/* + * Define Bits and Values of the registers + */ +/* PCI_COMMAND 16 bit Command */ + /* Bit 15..11: reserved */ +#define PCI_INT_DIS BIT_10S /* Interrupt INTx# disable (PCI 2.3) */ +#define PCI_FBTEN BIT_9S /* Fast Back-To-Back enable */ +#define PCI_SERREN BIT_8S /* SERR enable */ +#define PCI_ADSTEP BIT_7S /* Address Stepping */ +#define PCI_PERREN BIT_6S /* Parity Report Response enable */ +#define PCI_VGA_SNOOP BIT_5S /* VGA palette snoop */ +#define PCI_MWIEN BIT_4S /* Memory write an inv cycl ena */ +#define PCI_SCYCEN BIT_3S /* Special Cycle enable */ +#define PCI_BMEN BIT_2S /* Bus Master enable */ +#define PCI_MEMEN BIT_1S /* Memory Space Access enable */ +#define PCI_IOEN BIT_0S /* I/O Space Access enable */ + +#define PCI_COMMAND_VAL (PCI_FBTEN | PCI_SERREN | PCI_PERREN | PCI_MWIEN |\ + PCI_BMEN | PCI_MEMEN | PCI_IOEN) + +/* PCI_STATUS 16 bit Status */ +#define PCI_PERR BIT_15S /* Parity Error */ +#define PCI_SERR BIT_14S /* Signaled SERR */ +#define PCI_RMABORT BIT_13S /* Received Master Abort */ +#define PCI_RTABORT BIT_12S /* Received Target Abort */ + /* Bit 11: reserved */ +#define PCI_DEVSEL (3<<9) /* Bit 10.. 9: DEVSEL Timing */ +#define PCI_DEV_FAST (0<<9) /* fast */ +#define PCI_DEV_MEDIUM (1<<9) /* medium */ +#define PCI_DEV_SLOW (2<<9) /* slow */ +#define PCI_DATAPERR BIT_8S /* DATA Parity error detected */ +#define PCI_FB2BCAP BIT_7S /* Fast Back-to-Back Capability */ +#define PCI_UDF BIT_6S /* User Defined Features */ +#define PCI_66MHZCAP BIT_5S /* 66 MHz PCI bus clock capable */ +#define PCI_NEWCAP BIT_4S /* New cap. list implemented */ +#define PCI_INT_STAT BIT_3S /* Interrupt INTx# Status (PCI 2.3) */ + /* Bit 2.. 0: reserved */ + +#define PCI_ERRBITS (PCI_PERR | PCI_SERR | PCI_RMABORT | PCI_RTABORT |\ + PCI_DATAPERR) + +/* PCI_CLASS_CODE 24 bit Class Code */ +/* Byte 2: Base Class (02) */ +/* Byte 1: SubClass (00) */ +/* Byte 0: Programming Interface (00) */ + +/* PCI_CACHE_LSZ 8 bit Cache Line Size */ +/* Possible values: 0,2,4,8,16,32,64,128 */ + +/* PCI_HEADER_T 8 bit Header Type */ +#define PCI_HD_MF_DEV BIT_7S /* 0= single, 1= multi-func dev */ +#define PCI_HD_TYPE 0x7f /* Bit 6..0: Header Layout 0= normal */ + +/* PCI_BIST 8 bit Built-in selftest */ +/* Built-in Self test not supported (optional) */ + +/* PCI_BASE_1ST 32 bit 1st Base address */ +#define PCI_MEMSIZE 0x4000L /* use 16 kB Memory Base */ +#define PCI_MEMBASE_MSK 0xffffc000L /* Bit 31..14: Memory Base Address */ +#define PCI_MEMSIZE_MSK 0x00003ff0L /* Bit 13.. 4: Memory Size Req. */ +#define PCI_PREFEN BIT_3 /* Prefetchable */ +#define PCI_MEM_TYP (3L<<2) /* Bit 2.. 1: Memory Type */ +#define PCI_MEM32BIT (0L<<1) /* Base addr anywhere in 32 Bit range */ +#define PCI_MEM1M (1L<<1) /* Base addr below 1 MegaByte */ +#define PCI_MEM64BIT (2L<<1) /* Base addr anywhere in 64 Bit range */ +#define PCI_MEMSPACE BIT_0 /* Memory Space Indicator */ + +/* PCI_BASE_2ND 32 bit 2nd Base address */ +#define PCI_IOBASE 0xffffff00L /* Bit 31.. 8: I/O Base address */ +#define PCI_IOSIZE 0x000000fcL /* Bit 7.. 2: I/O Size Requirements */ + /* Bit 1: reserved */ +#define PCI_IOSPACE BIT_0 /* I/O Space Indicator */ + +/* PCI_BASE_ROM 32 bit Expansion ROM Base Address */ +#define PCI_ROMBASE_MSK 0xfffe0000L /* Bit 31..17: ROM Base address */ +#define PCI_ROMBASE_SIZ (0x1cL<<14) /* Bit 16..14: Treat as Base or Size */ +#define PCI_ROMSIZE (0x38L<<11) /* Bit 13..11: ROM Size Requirements */ + /* Bit 10.. 1: reserved */ +#define PCI_ROMEN BIT_0 /* Address Decode enable */ + +/* Device Dependent Region */ +/* PCI_OUR_REG_1 32 bit Our Register 1 */ + /* Bit 31..29: reserved */ +#define PCI_PHY_COMA BIT_28 /* Set PHY to Coma Mode (YUKON only) */ +#define PCI_TEST_CAL BIT_27 /* Test PCI buffer calib. (YUKON only) */ +#define PCI_EN_CAL BIT_26 /* Enable PCI buffer calib. (YUKON only) */ +#define PCI_VIO BIT_25 /* PCI I/O Voltage, 0 = 3.3V, 1 = 5V */ +#define PCI_DIS_BOOT BIT_24 /* Disable BOOT via ROM */ +#define PCI_EN_IO BIT_23 /* Mapping to I/O space */ +#define PCI_EN_FPROM BIT_22 /* Enable FLASH mapping to memory */ + /* 1 = Map Flash to memory */ + /* 0 = Disable addr. dec */ +#define PCI_PAGESIZE (3L<<20) /* Bit 21..20: FLASH Page Size */ +#define PCI_PAGE_16 (0L<<20) /* 16 k pages */ +#define PCI_PAGE_32K (1L<<20) /* 32 k pages */ +#define PCI_PAGE_64K (2L<<20) /* 64 k pages */ +#define PCI_PAGE_128K (3L<<20) /* 128 k pages */ + /* Bit 19: reserved */ +#define PCI_PAGEREG (7L<<16) /* Bit 18..16: Page Register */ +#define PCI_NOTAR BIT_15 /* No turnaround cycle */ +#define PCI_FORCE_BE BIT_14 /* Assert all BEs on MR */ +#define PCI_DIS_MRL BIT_13 /* Disable Mem Read Line */ +#define PCI_DIS_MRM BIT_12 /* Disable Mem Read Multiple */ +#define PCI_DIS_MWI BIT_11 /* Disable Mem Write & Invalidate */ +#define PCI_DISC_CLS BIT_10 /* Disc: cacheLsz bound */ +#define PCI_BURST_DIS BIT_9 /* Burst Disable */ +#define PCI_DIS_PCI_CLK BIT_8 /* Disable PCI clock driving */ +#define PCI_SKEW_DAS (0xfL<<4) /* Bit 7.. 4: Skew Ctrl, DAS Ext */ +#define PCI_SKEW_BASE 0xfL /* Bit 3.. 0: Skew Ctrl, Base */ + + +/* PCI_OUR_REG_2 32 bit Our Register 2 */ +#define PCI_VPD_WR_THR (0xffL<<24) /* Bit 31..24: VPD Write Threshold */ +#define PCI_DEV_SEL (0x7fL<<17) /* Bit 23..17: EEPROM Device Select */ +#define PCI_VPD_ROM_SZ (7L<<14) /* Bit 16..14: VPD ROM Size */ + /* Bit 13..12: reserved */ +#define PCI_PATCH_DIR (0xfL<<8) /* Bit 11.. 8: Ext Patches dir 3..0 */ +#define PCI_PATCH_DIR_3 BIT_11 +#define PCI_PATCH_DIR_2 BIT_10 +#define PCI_PATCH_DIR_1 BIT_9 +#define PCI_PATCH_DIR_0 BIT_8 +#define PCI_EXT_PATCHS (0xfL<<4) /* Bit 7.. 4: Extended Patches 3..0 */ +#define PCI_EXT_PATCH_3 BIT_7 +#define PCI_EXT_PATCH_2 BIT_6 +#define PCI_EXT_PATCH_1 BIT_5 +#define PCI_EXT_PATCH_0 BIT_4 +#define PCI_EN_DUMMY_RD BIT_3 /* Enable Dummy Read */ +#define PCI_REV_DESC BIT_2 /* Reverse Desc. Bytes */ + /* Bit 1: reserved */ +#define PCI_USEDATA64 BIT_0 /* Use 64Bit Data bus ext */ + + +/* Power Management Region */ +/* PCI_PM_CAP_REG 16 bit Power Management Capabilities */ +#define PCI_PME_SUP_MSK (0x1f<<11) /* Bit 15..11: PM Event Support Mask */ +#define PCI_PME_D3C_SUP BIT_15S /* PME from D3cold Support (if Vaux) */ +#define PCI_PME_D3H_SUP BIT_14S /* PME from D3hot Support */ +#define PCI_PME_D2_SUP BIT_13S /* PME from D2 Support */ +#define PCI_PME_D1_SUP BIT_12S /* PME from D1 Support */ +#define PCI_PME_D0_SUP BIT_11S /* PME from D0 Support */ +#define PCI_PM_D2_SUP BIT_10S /* D2 Support in 33 MHz mode */ +#define PCI_PM_D1_SUP BIT_9S /* D1 Support */ + /* Bit 8.. 6: reserved */ +#define PCI_PM_DSI BIT_5S /* Device Specific Initialization */ +#define PCI_PM_APS BIT_4S /* Auxialiary Power Source */ +#define PCI_PME_CLOCK BIT_3S /* PM Event Clock */ +#define PCI_PM_VER_MSK 7 /* Bit 2.. 0: PM PCI Spec. version */ + +/* PCI_PM_CTL_STS 16 bit Power Management Control/Status */ +#define PCI_PME_STATUS BIT_15S /* PME Status (YUKON only) */ +#define PCI_PM_DAT_SCL (3<<13) /* Bit 14..13: Data Reg. scaling factor */ +#define PCI_PM_DAT_SEL (0xf<<9) /* Bit 12.. 9: PM data selector field */ +#define PCI_PME_EN BIT_8S /* Enable PME# generation (YUKON only) */ + /* Bit 7.. 2: reserved */ +#define PCI_PM_STATE_MSK 3 /* Bit 1.. 0: Power Management State */ + +#define PCI_PM_STATE_D0 0 /* D0: Operational (default) */ +#define PCI_PM_STATE_D1 1 /* D1: (YUKON only) */ +#define PCI_PM_STATE_D2 2 /* D2: (YUKON only) */ +#define PCI_PM_STATE_D3 3 /* D3: HOT, Power Down and Reset */ + +/* VPD Region */ +/* PCI_VPD_ADR_REG 16 bit VPD Address Register */ +#define PCI_VPD_FLAG BIT_15S /* starts VPD rd/wr cycle */ +#define PCI_VPD_ADR_MSK 0x7fffL /* Bit 14.. 0: VPD address mask */ + +/* Control Register File (Address Map) */ + +/* + * Bank 0 + */ +#define B0_RAP 0x0000 /* 8 bit Register Address Port */ + /* 0x0001 - 0x0003: reserved */ +#define B0_CTST 0x0004 /* 16 bit Control/Status register */ +#define B0_LED 0x0006 /* 8 Bit LED register */ +#define B0_POWER_CTRL 0x0007 /* 8 Bit Power Control reg (YUKON only) */ +#define B0_ISRC 0x0008 /* 32 bit Interrupt Source Register */ +#define B0_IMSK 0x000c /* 32 bit Interrupt Mask Register */ +#define B0_HWE_ISRC 0x0010 /* 32 bit HW Error Interrupt Src Reg */ +#define B0_HWE_IMSK 0x0014 /* 32 bit HW Error Interrupt Mask Reg */ +#define B0_SP_ISRC 0x0018 /* 32 bit Special Interrupt Source Reg */ + /* 0x001c: reserved */ + +/* B0 XMAC 1 registers (GENESIS only) */ +#define B0_XM1_IMSK 0x0020 /* 16 bit r/w XMAC 1 Interrupt Mask Register*/ + /* 0x0022 - 0x0027: reserved */ +#define B0_XM1_ISRC 0x0028 /* 16 bit ro XMAC 1 Interrupt Status Reg */ + /* 0x002a - 0x002f: reserved */ +#define B0_XM1_PHY_ADDR 0x0030 /* 16 bit r/w XMAC 1 PHY Address Register */ + /* 0x0032 - 0x0033: reserved */ +#define B0_XM1_PHY_DATA 0x0034 /* 16 bit r/w XMAC 1 PHY Data Register */ + /* 0x0036 - 0x003f: reserved */ + +/* B0 XMAC 2 registers (GENESIS only) */ +#define B0_XM2_IMSK 0x0040 /* 16 bit r/w XMAC 2 Interrupt Mask Register*/ + /* 0x0042 - 0x0047: reserved */ +#define B0_XM2_ISRC 0x0048 /* 16 bit ro XMAC 2 Interrupt Status Reg */ + /* 0x004a - 0x004f: reserved */ +#define B0_XM2_PHY_ADDR 0x0050 /* 16 bit r/w XMAC 2 PHY Address Register */ + /* 0x0052 - 0x0053: reserved */ +#define B0_XM2_PHY_DATA 0x0054 /* 16 bit r/w XMAC 2 PHY Data Register */ + /* 0x0056 - 0x005f: reserved */ + +/* BMU Control Status Registers */ +#define B0_R1_CSR 0x0060 /* 32 bit BMU Ctrl/Stat Rx Queue 1 */ +#define B0_R2_CSR 0x0064 /* 32 bit BMU Ctrl/Stat Rx Queue 2 */ +#define B0_XS1_CSR 0x0068 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */ +#define B0_XA1_CSR 0x006c /* 32 bit BMU Ctrl/Stat Async Tx Queue 1*/ +#define B0_XS2_CSR 0x0070 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */ +#define B0_XA2_CSR 0x0074 /* 32 bit BMU Ctrl/Stat Async Tx Queue 2*/ + /* 0x0078 - 0x007f: reserved */ + +/* + * Bank 1 + * - completely empty (this is the RAP Block window) + * Note: if RAP = 1 this page is reserved + */ + +/* + * Bank 2 + */ +/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */ +#define B2_MAC_1 0x0100 /* NA reg MAC Address 1 */ + /* 0x0106 - 0x0107: reserved */ +#define B2_MAC_2 0x0108 /* NA reg MAC Address 2 */ + /* 0x010e - 0x010f: reserved */ +#define B2_MAC_3 0x0110 /* NA reg MAC Address 3 */ + /* 0x0116 - 0x0117: reserved */ +#define B2_CONN_TYP 0x0118 /* 8 bit Connector type */ +#define B2_PMD_TYP 0x0119 /* 8 bit PMD type */ +#define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration / Chip Revision */ +#define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */ + /* Eprom registers are currently of no use */ +#define B2_E_0 0x011c /* 8 bit EPROM Byte 0 (ext. SRAM size */ +#define B2_E_1 0x011d /* 8 bit EPROM Byte 1 (PHY type) */ +#define B2_E_2 0x011e /* 8 bit EPROM Byte 2 */ +#define B2_E_3 0x011f /* 8 bit EPROM Byte 3 */ +#define B2_FAR 0x0120 /* 32 bit Flash-Prom Addr Reg/Cnt */ +#define B2_FDP 0x0124 /* 8 bit Flash-Prom Data Port */ + /* 0x0125 - 0x0127: reserved */ +#define B2_LD_CTRL 0x0128 /* 8 bit EPROM loader control register */ +#define B2_LD_TEST 0x0129 /* 8 bit EPROM loader test register */ + /* 0x012a - 0x012f: reserved */ +#define B2_TI_INI 0x0130 /* 32 bit Timer Init Value */ +#define B2_TI_VAL 0x0134 /* 32 bit Timer Value */ +#define B2_TI_CTRL 0x0138 /* 8 bit Timer Control */ +#define B2_TI_TEST 0x0139 /* 8 Bit Timer Test */ + /* 0x013a - 0x013f: reserved */ +#define B2_IRQM_INI 0x0140 /* 32 bit IRQ Moderation Timer Init Reg.*/ +#define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */ +#define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */ +#define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */ +#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */ +#define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */ + /* 0x0154 - 0x0157: reserved */ +#define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */ +#define B2_TST_CTRL2 0x0159 /* 8 bit Test Control Register 2 */ + /* 0x015a - 0x015b: reserved */ +#define B2_GP_IO 0x015c /* 32 bit General Purpose I/O Register */ +#define B2_I2C_CTRL 0x0160 /* 32 bit I2C HW Control Register */ +#define B2_I2C_DATA 0x0164 /* 32 bit I2C HW Data Register */ +#define B2_I2C_IRQ 0x0168 /* 32 bit I2C HW IRQ Register */ +#define B2_I2C_SW 0x016c /* 32 bit I2C SW Port Register */ + +/* Blink Source Counter (GENESIS only) */ +#define B2_BSC_INI 0x0170 /* 32 bit Blink Source Counter Init Val */ +#define B2_BSC_VAL 0x0174 /* 32 bit Blink Source Counter Value */ +#define B2_BSC_CTRL 0x0178 /* 8 bit Blink Source Counter Control */ +#define B2_BSC_STAT 0x0179 /* 8 bit Blink Source Counter Status */ +#define B2_BSC_TST 0x017a /* 16 bit Blink Source Counter Test Reg */ + /* 0x017c - 0x017f: reserved */ + +/* + * Bank 3 + */ +/* RAM Random Registers */ +#define B3_RAM_ADDR 0x0180 /* 32 bit RAM Address, to read or write */ +#define B3_RAM_DATA_LO 0x0184 /* 32 bit RAM Data Word (low dWord) */ +#define B3_RAM_DATA_HI 0x0188 /* 32 bit RAM Data Word (high dWord) */ + /* 0x018c - 0x018f: reserved */ + +/* RAM Interface Registers */ +/* + * The HW-Spec. calls this registers Timeout Value 0..11. But this names are + * not usable in SW. Please notice these are NOT real timeouts, these are + * the number of qWords transferred continuously. + */ +#define B3_RI_WTO_R1 0x0190 /* 8 bit WR Timeout Queue R1 (TO0) */ +#define B3_RI_WTO_XA1 0x0191 /* 8 bit WR Timeout Queue XA1 (TO1) */ +#define B3_RI_WTO_XS1 0x0192 /* 8 bit WR Timeout Queue XS1 (TO2) */ +#define B3_RI_RTO_R1 0x0193 /* 8 bit RD Timeout Queue R1 (TO3) */ +#define B3_RI_RTO_XA1 0x0194 /* 8 bit RD Timeout Queue XA1 (TO4) */ +#define B3_RI_RTO_XS1 0x0195 /* 8 bit RD Timeout Queue XS1 (TO5) */ +#define B3_RI_WTO_R2 0x0196 /* 8 bit WR Timeout Queue R2 (TO6) */ +#define B3_RI_WTO_XA2 0x0197 /* 8 bit WR Timeout Queue XA2 (TO7) */ +#define B3_RI_WTO_XS2 0x0198 /* 8 bit WR Timeout Queue XS2 (TO8) */ +#define B3_RI_RTO_R2 0x0199 /* 8 bit RD Timeout Queue R2 (TO9) */ +#define B3_RI_RTO_XA2 0x019a /* 8 bit RD Timeout Queue XA2 (TO10)*/ +#define B3_RI_RTO_XS2 0x019b /* 8 bit RD Timeout Queue XS2 (TO11)*/ +#define B3_RI_TO_VAL 0x019c /* 8 bit Current Timeout Count Val */ + /* 0x019d - 0x019f: reserved */ +#define B3_RI_CTRL 0x01a0 /* 16 bit RAM Interface Control Register */ +#define B3_RI_TEST 0x01a2 /* 8 bit RAM Interface Test Register */ + /* 0x01a3 - 0x01af: reserved */ + +/* MAC Arbiter Registers (GENESIS only) */ +/* these are the no. of qWord transferred continuously and NOT real timeouts */ +#define B3_MA_TOINI_RX1 0x01b0 /* 8 bit Timeout Init Val Rx Path MAC 1 */ +#define B3_MA_TOINI_RX2 0x01b1 /* 8 bit Timeout Init Val Rx Path MAC 2 */ +#define B3_MA_TOINI_TX1 0x01b2 /* 8 bit Timeout Init Val Tx Path MAC 1 */ +#define B3_MA_TOINI_TX2 0x01b3 /* 8 bit Timeout Init Val Tx Path MAC 2 */ +#define B3_MA_TOVAL_RX1 0x01b4 /* 8 bit Timeout Value Rx Path MAC 1 */ +#define B3_MA_TOVAL_RX2 0x01b5 /* 8 bit Timeout Value Rx Path MAC 1 */ +#define B3_MA_TOVAL_TX1 0x01b6 /* 8 bit Timeout Value Tx Path MAC 2 */ +#define B3_MA_TOVAL_TX2 0x01b7 /* 8 bit Timeout Value Tx Path MAC 2 */ +#define B3_MA_TO_CTRL 0x01b8 /* 16 bit MAC Arbiter Timeout Ctrl Reg */ +#define B3_MA_TO_TEST 0x01ba /* 16 bit MAC Arbiter Timeout Test Reg */ + /* 0x01bc - 0x01bf: reserved */ +#define B3_MA_RCINI_RX1 0x01c0 /* 8 bit Recovery Init Val Rx Path MAC 1 */ +#define B3_MA_RCINI_RX2 0x01c1 /* 8 bit Recovery Init Val Rx Path MAC 2 */ +#define B3_MA_RCINI_TX1 0x01c2 /* 8 bit Recovery Init Val Tx Path MAC 1 */ +#define B3_MA_RCINI_TX2 0x01c3 /* 8 bit Recovery Init Val Tx Path MAC 2 */ +#define B3_MA_RCVAL_RX1 0x01c4 /* 8 bit Recovery Value Rx Path MAC 1 */ +#define B3_MA_RCVAL_RX2 0x01c5 /* 8 bit Recovery Value Rx Path MAC 1 */ +#define B3_MA_RCVAL_TX1 0x01c6 /* 8 bit Recovery Value Tx Path MAC 2 */ +#define B3_MA_RCVAL_TX2 0x01c7 /* 8 bit Recovery Value Tx Path MAC 2 */ +#define B3_MA_RC_CTRL 0x01c8 /* 16 bit MAC Arbiter Recovery Ctrl Reg */ +#define B3_MA_RC_TEST 0x01ca /* 16 bit MAC Arbiter Recovery Test Reg */ + /* 0x01cc - 0x01cf: reserved */ + +/* Packet Arbiter Registers (GENESIS only) */ +/* these are real timeouts */ +#define B3_PA_TOINI_RX1 0x01d0 /* 16 bit Timeout Init Val Rx Path MAC 1 */ + /* 0x01d2 - 0x01d3: reserved */ +#define B3_PA_TOINI_RX2 0x01d4 /* 16 bit Timeout Init Val Rx Path MAC 2 */ + /* 0x01d6 - 0x01d7: reserved */ +#define B3_PA_TOINI_TX1 0x01d8 /* 16 bit Timeout Init Val Tx Path MAC 1 */ + /* 0x01da - 0x01db: reserved */ +#define B3_PA_TOINI_TX2 0x01dc /* 16 bit Timeout Init Val Tx Path MAC 2 */ + /* 0x01de - 0x01df: reserved */ +#define B3_PA_TOVAL_RX1 0x01e0 /* 16 bit Timeout Val Rx Path MAC 1 */ + /* 0x01e2 - 0x01e3: reserved */ +#define B3_PA_TOVAL_RX2 0x01e4 /* 16 bit Timeout Val Rx Path MAC 2 */ + /* 0x01e6 - 0x01e7: reserved */ +#define B3_PA_TOVAL_TX1 0x01e8 /* 16 bit Timeout Val Tx Path MAC 1 */ + /* 0x01ea - 0x01eb: reserved */ +#define B3_PA_TOVAL_TX2 0x01ec /* 16 bit Timeout Val Tx Path MAC 2 */ + /* 0x01ee - 0x01ef: reserved */ +#define B3_PA_CTRL 0x01f0 /* 16 bit Packet Arbiter Ctrl Register */ +#define B3_PA_TEST 0x01f2 /* 16 bit Packet Arbiter Test Register */ + /* 0x01f4 - 0x01ff: reserved */ + +/* + * Bank 4 - 5 + */ +/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ +#define TXA_ITI_INI 0x0200 /* 32 bit Tx Arb Interval Timer Init Val*/ +#define TXA_ITI_VAL 0x0204 /* 32 bit Tx Arb Interval Timer Value */ +#define TXA_LIM_INI 0x0208 /* 32 bit Tx Arb Limit Counter Init Val */ +#define TXA_LIM_VAL 0x020c /* 32 bit Tx Arb Limit Counter Value */ +#define TXA_CTRL 0x0210 /* 8 bit Tx Arbiter Control Register */ +#define TXA_TEST 0x0211 /* 8 bit Tx Arbiter Test Register */ +#define TXA_STAT 0x0212 /* 8 bit Tx Arbiter Status Register */ + /* 0x0213 - 0x027f: reserved */ + /* 0x0280 - 0x0292: MAC 2 */ + /* 0x0213 - 0x027f: reserved */ + +/* + * Bank 6 + */ +/* External registers (GENESIS only) */ +#define B6_EXT_REG 0x0300 + +/* + * Bank 7 + */ +/* This is a copy of the Configuration register file (lower half) */ +#define B7_CFG_SPC 0x0380 + +/* + * Bank 8 - 15 + */ +/* Receive and Transmit Queue Registers, use Q_ADDR() to access */ +#define B8_Q_REGS 0x0400 + +/* Queue Register Offsets, use Q_ADDR() to access */ +#define Q_D 0x00 /* 8*32 bit Current Descriptor */ +#define Q_DA_L 0x20 /* 32 bit Current Descriptor Address Low dWord */ +#define Q_DA_H 0x24 /* 32 bit Current Descriptor Address High dWord */ +#define Q_AC_L 0x28 /* 32 bit Current Address Counter Low dWord */ +#define Q_AC_H 0x2c /* 32 bit Current Address Counter High dWord */ +#define Q_BC 0x30 /* 32 bit Current Byte Counter */ +#define Q_CSR 0x34 /* 32 bit BMU Control/Status Register */ +#define Q_F 0x38 /* 32 bit Flag Register */ +#define Q_T1 0x3c /* 32 bit Test Register 1 */ +#define Q_T1_TR 0x3c /* 8 bit Test Register 1 Transfer SM */ +#define Q_T1_WR 0x3d /* 8 bit Test Register 1 Write Descriptor SM */ +#define Q_T1_RD 0x3e /* 8 bit Test Register 1 Read Descriptor SM */ +#define Q_T1_SV 0x3f /* 8 bit Test Register 1 Supervisor SM */ +#define Q_T2 0x40 /* 32 bit Test Register 2 */ +#define Q_T3 0x44 /* 32 bit Test Register 3 */ + /* 0x48 - 0x7f: reserved */ + +/* + * Bank 16 - 23 + */ +/* RAM Buffer Registers */ +#define B16_RAM_REGS 0x0800 + +/* RAM Buffer Register Offsets, use RB_ADDR() to access */ +#define RB_START 0x00 /* 32 bit RAM Buffer Start Address */ +#define RB_END 0x04 /* 32 bit RAM Buffer End Address */ +#define RB_WP 0x08 /* 32 bit RAM Buffer Write Pointer */ +#define RB_RP 0x0c /* 32 bit RAM Buffer Read Pointer */ +#define RB_RX_UTPP 0x10 /* 32 bit Rx Upper Threshold, Pause Pack */ +#define RB_RX_LTPP 0x14 /* 32 bit Rx Lower Threshold, Pause Pack */ +#define RB_RX_UTHP 0x18 /* 32 bit Rx Upper Threshold, High Prio */ +#define RB_RX_LTHP 0x1c /* 32 bit Rx Lower Threshold, High Prio */ + /* 0x10 - 0x1f: reserved at Tx RAM Buffer Registers */ +#define RB_PC 0x20 /* 32 bit RAM Buffer Packet Counter */ +#define RB_LEV 0x24 /* 32 bit RAM Buffer Level Register */ +#define RB_CTRL 0x28 /* 8 bit RAM Buffer Control Register */ +#define RB_TST1 0x29 /* 8 bit RAM Buffer Test Register 1 */ +#define RB_TST2 0x2A /* 8 bit RAM Buffer Test Register 2 */ + /* 0x2c - 0x7f: reserved */ + +/* + * Bank 24 + */ +/* + * Receive MAC FIFO, Receive LED, and Link_Sync regs (GENESIS only) + * use MR_ADDR() to access + */ +#define RX_MFF_EA 0x0c00 /* 32 bit Receive MAC FIFO End Address */ +#define RX_MFF_WP 0x0c04 /* 32 bit Receive MAC FIFO Write Pointer */ + /* 0x0c08 - 0x0c0b: reserved */ +#define RX_MFF_RP 0x0c0c /* 32 bit Receive MAC FIFO Read Pointer */ +#define RX_MFF_PC 0x0c10 /* 32 bit Receive MAC FIFO Packet Cnt */ +#define RX_MFF_LEV 0x0c14 /* 32 bit Receive MAC FIFO Level */ +#define RX_MFF_CTRL1 0x0c18 /* 16 bit Receive MAC FIFO Control Reg 1*/ +#define RX_MFF_STAT_TO 0x0c1a /* 8 bit Receive MAC Status Timeout */ +#define RX_MFF_TIST_TO 0x0c1b /* 8 bit Receive MAC Time Stamp Timeout */ +#define RX_MFF_CTRL2 0x0c1c /* 8 bit Receive MAC FIFO Control Reg 2*/ +#define RX_MFF_TST1 0x0c1d /* 8 bit Receive MAC FIFO Test Reg 1 */ +#define RX_MFF_TST2 0x0c1e /* 8 bit Receive MAC FIFO Test Reg 2 */ + /* 0x0c1f: reserved */ +#define RX_LED_INI 0x0c20 /* 32 bit Receive LED Cnt Init Value */ +#define RX_LED_VAL 0x0c24 /* 32 bit Receive LED Cnt Current Value */ +#define RX_LED_CTRL 0x0c28 /* 8 bit Receive LED Cnt Control Reg */ +#define RX_LED_TST 0x0c29 /* 8 bit Receive LED Cnt Test Register */ + /* 0x0c2a - 0x0c2f: reserved */ +#define LNK_SYNC_INI 0x0c30 /* 32 bit Link Sync Cnt Init Value */ +#define LNK_SYNC_VAL 0x0c34 /* 32 bit Link Sync Cnt Current Value */ +#define LNK_SYNC_CTRL 0x0c38 /* 8 bit Link Sync Cnt Control Register */ +#define LNK_SYNC_TST 0x0c39 /* 8 bit Link Sync Cnt Test Register */ + /* 0x0c3a - 0x0c3b: reserved */ +#define LNK_LED_REG 0x0c3c /* 8 bit Link LED Register */ + /* 0x0c3d - 0x0c3f: reserved */ + +/* Receive GMAC FIFO (YUKON only), use MR_ADDR() to access */ +#define RX_GMF_EA 0x0c40 /* 32 bit Rx GMAC FIFO End Address */ +#define RX_GMF_AF_THR 0x0c44 /* 32 bit Rx GMAC FIFO Almost Full Thresh. */ +#define RX_GMF_CTRL_T 0x0c48 /* 32 bit Rx GMAC FIFO Control/Test */ +#define RX_GMF_FL_MSK 0x0c4c /* 32 bit Rx GMAC FIFO Flush Mask */ +#define RX_GMF_FL_THR 0x0c50 /* 32 bit Rx GMAC FIFO Flush Threshold */ + /* 0x0c54 - 0x0c5f: reserved */ +#define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */ + /* 0x0c64 - 0x0c67: reserved */ +#define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */ + /* 0x0c6c - 0x0c6f: reserved */ +#define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */ + /* 0x0c74 - 0x0c77: reserved */ +#define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */ + /* 0x0c7c - 0x0c7f: reserved */ + +/* + * Bank 25 + */ + /* 0x0c80 - 0x0cbf: MAC 2 */ + /* 0x0cc0 - 0x0cff: reserved */ + +/* + * Bank 26 + */ +/* + * Transmit MAC FIFO and Transmit LED Registers (GENESIS only), + * use MR_ADDR() to access + */ +#define TX_MFF_EA 0x0d00 /* 32 bit Transmit MAC FIFO End Address */ +#define TX_MFF_WP 0x0d04 /* 32 bit Transmit MAC FIFO WR Pointer */ +#define TX_MFF_WSP 0x0d08 /* 32 bit Transmit MAC FIFO WR Shadow Ptr */ +#define TX_MFF_RP 0x0d0c /* 32 bit Transmit MAC FIFO RD Pointer */ +#define TX_MFF_PC 0x0d10 /* 32 bit Transmit MAC FIFO Packet Cnt */ +#define TX_MFF_LEV 0x0d14 /* 32 bit Transmit MAC FIFO Level */ +#define TX_MFF_CTRL1 0x0d18 /* 16 bit Transmit MAC FIFO Ctrl Reg 1 */ +#define TX_MFF_WAF 0x0d1a /* 8 bit Transmit MAC Wait after flush */ + /* 0x0c1b: reserved */ +#define TX_MFF_CTRL2 0x0d1c /* 8 bit Transmit MAC FIFO Ctrl Reg 2 */ +#define TX_MFF_TST1 0x0d1d /* 8 bit Transmit MAC FIFO Test Reg 1 */ +#define TX_MFF_TST2 0x0d1e /* 8 bit Transmit MAC FIFO Test Reg 2 */ + /* 0x0d1f: reserved */ +#define TX_LED_INI 0x0d20 /* 32 bit Transmit LED Cnt Init Value */ +#define TX_LED_VAL 0x0d24 /* 32 bit Transmit LED Cnt Current Val */ +#define TX_LED_CTRL 0x0d28 /* 8 bit Transmit LED Cnt Control Reg */ +#define TX_LED_TST 0x0d29 /* 8 bit Transmit LED Cnt Test Reg */ + /* 0x0d2a - 0x0d3f: reserved */ + +/* Transmit GMAC FIFO (YUKON only), use MR_ADDR() to access */ +#define TX_GMF_EA 0x0d40 /* 32 bit Tx GMAC FIFO End Address */ +#define TX_GMF_AE_THR 0x0d44 /* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ +#define TX_GMF_CTRL_T 0x0d48 /* 32 bit Tx GMAC FIFO Control/Test */ + /* 0x0d4c - 0x0d5f: reserved */ +#define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */ +#define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Ptr. */ +#define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */ + /* 0x0d6c - 0x0d6f: reserved */ +#define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */ +#define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */ +#define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */ + /* 0x0d7c - 0x0d7f: reserved */ + +/* + * Bank 27 + */ + /* 0x0d80 - 0x0dbf: MAC 2 */ + /* 0x0daa - 0x0dff: reserved */ + +/* + * Bank 28 + */ +/* Descriptor Poll Timer Registers */ +#define B28_DPT_INI 0x0e00 /* 24 bit Descriptor Poll Timer Init Val */ +#define B28_DPT_VAL 0x0e04 /* 24 bit Descriptor Poll Timer Curr Val */ +#define B28_DPT_CTRL 0x0e08 /* 8 bit Descriptor Poll Timer Ctrl Reg */ + /* 0x0e09: reserved */ +#define B28_DPT_TST 0x0e0a /* 8 bit Descriptor Poll Timer Test Reg */ + /* 0x0e0b: reserved */ + +/* Time Stamp Timer Registers (YUKON only) */ + /* 0x0e10: reserved */ +#define GMAC_TI_ST_VAL 0x0e14 /* 32 bit Time Stamp Timer Curr Val */ +#define GMAC_TI_ST_CTRL 0x0e18 /* 8 bit Time Stamp Timer Ctrl Reg */ + /* 0x0e19: reserved */ +#define GMAC_TI_ST_TST 0x0e1a /* 8 bit Time Stamp Timer Test Reg */ + /* 0x0e1b - 0x0e7f: reserved */ + +/* + * Bank 29 + */ + /* 0x0e80 - 0x0efc: reserved */ + +/* + * Bank 30 + */ +/* GMAC and GPHY Control Registers (YUKON only) */ +#define GMAC_CTRL 0x0f00 /* 32 bit GMAC Control Reg */ +#define GPHY_CTRL 0x0f04 /* 32 bit GPHY Control Reg */ +#define GMAC_IRQ_SRC 0x0f08 /* 8 bit GMAC Interrupt Source Reg */ + /* 0x0f09 - 0x0f0b: reserved */ +#define GMAC_IRQ_MSK 0x0f0c /* 8 bit GMAC Interrupt Mask Reg */ + /* 0x0f0d - 0x0f0f: reserved */ +#define GMAC_LINK_CTRL 0x0f10 /* 16 bit Link Control Reg */ + /* 0x0f14 - 0x0f1f: reserved */ + +/* Wake-up Frame Pattern Match Control Registers (YUKON only) */ + +#define WOL_REG_OFFS 0x20 /* HW-Bug: Address is + 0x20 against spec. */ + +#define WOL_CTRL_STAT 0x0f20 /* 16 bit WOL Control/Status Reg */ +#define WOL_MATCH_CTL 0x0f22 /* 8 bit WOL Match Control Reg */ +#define WOL_MATCH_RES 0x0f23 /* 8 bit WOL Match Result Reg */ +#define WOL_MAC_ADDR_LO 0x0f24 /* 32 bit WOL MAC Address Low */ +#define WOL_MAC_ADDR_HI 0x0f28 /* 16 bit WOL MAC Address High */ +#define WOL_PATT_RPTR 0x0f2c /* 8 bit WOL Pattern Read Ptr */ + +/* use this macro to access above registers */ +#define WOL_REG(Reg) ((Reg) + (pAC->GIni.GIWolOffs)) + + +/* WOL Pattern Length Registers (YUKON only) */ + +#define WOL_PATT_LEN_LO 0x0f30 /* 32 bit WOL Pattern Length 3..0 */ +#define WOL_PATT_LEN_HI 0x0f34 /* 24 bit WOL Pattern Length 6..4 */ + +/* WOL Pattern Counter Registers (YUKON only) */ + +#define WOL_PATT_CNT_0 0x0f38 /* 32 bit WOL Pattern Counter 3..0 */ +#define WOL_PATT_CNT_4 0x0f3c /* 24 bit WOL Pattern Counter 6..4 */ + /* 0x0f40 - 0x0f7f: reserved */ + +/* + * Bank 31 + */ +/* 0x0f80 - 0x0fff: reserved */ + +/* + * Bank 32 - 33 + */ +#define WOL_PATT_RAM_1 0x1000 /* WOL Pattern RAM Link 1 */ + +/* + * Bank 0x22 - 0x3f + */ +/* 0x1100 - 0x1fff: reserved */ + +/* + * Bank 0x40 - 0x4f + */ +#define BASE_XMAC_1 0x2000 /* XMAC 1 registers */ + +/* + * Bank 0x50 - 0x5f + */ + +#define BASE_GMAC_1 0x2800 /* GMAC 1 registers */ + +/* + * Bank 0x60 - 0x6f + */ +#define BASE_XMAC_2 0x3000 /* XMAC 2 registers */ + +/* + * Bank 0x70 - 0x7f + */ +#define BASE_GMAC_2 0x3800 /* GMAC 2 registers */ + +/* + * Control Register Bit Definitions: + */ +/* B0_RAP 8 bit Register Address Port */ + /* Bit 7: reserved */ +#define RAP_RAP 0x3f /* Bit 6..0: 0 = block 0,..,6f = block 6f */ + +/* B0_CTST 16 bit Control/Status register */ + /* Bit 15..14: reserved */ +#define CS_CLK_RUN_HOT BIT_13S /* CLK_RUN hot m. (YUKON-Lite only) */ +#define CS_CLK_RUN_RST BIT_12S /* CLK_RUN reset (YUKON-Lite only) */ +#define CS_CLK_RUN_ENA BIT_11S /* CLK_RUN enable (YUKON-Lite only) */ +#define CS_VAUX_AVAIL BIT_10S /* VAUX available (YUKON only) */ +#define CS_BUS_CLOCK BIT_9S /* Bus Clock 0/1 = 33/66 MHz */ +#define CS_BUS_SLOT_SZ BIT_8S /* Slot Size 0/1 = 32/64 bit slot */ +#define CS_ST_SW_IRQ BIT_7S /* Set IRQ SW Request */ +#define CS_CL_SW_IRQ BIT_6S /* Clear IRQ SW Request */ +#define CS_STOP_DONE BIT_5S /* Stop Master is finished */ +#define CS_STOP_MAST BIT_4S /* Command Bit to stop the master */ +#define CS_MRST_CLR BIT_3S /* Clear Master reset */ +#define CS_MRST_SET BIT_2S /* Set Master reset */ +#define CS_RST_CLR BIT_1S /* Clear Software reset */ +#define CS_RST_SET BIT_0S /* Set Software reset */ + +/* B0_LED 8 Bit LED register */ + /* Bit 7.. 2: reserved */ +#define LED_STAT_ON BIT_1S /* Status LED on */ +#define LED_STAT_OFF BIT_0S /* Status LED off */ + +/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */ +#define PC_VAUX_ENA BIT_7 /* Switch VAUX Enable */ +#define PC_VAUX_DIS BIT_6 /* Switch VAUX Disable */ +#define PC_VCC_ENA BIT_5 /* Switch VCC Enable */ +#define PC_VCC_DIS BIT_4 /* Switch VCC Disable */ +#define PC_VAUX_ON BIT_3 /* Switch VAUX On */ +#define PC_VAUX_OFF BIT_2 /* Switch VAUX Off */ +#define PC_VCC_ON BIT_1 /* Switch VCC On */ +#define PC_VCC_OFF BIT_0 /* Switch VCC Off */ + +/* B0_ISRC 32 bit Interrupt Source Register */ +/* B0_IMSK 32 bit Interrupt Mask Register */ +/* B0_SP_ISRC 32 bit Special Interrupt Source Reg */ +/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */ +#define IS_ALL_MSK 0xbfffffffUL /* All Interrupt bits */ +#define IS_HW_ERR BIT_31 /* Interrupt HW Error */ + /* Bit 30: reserved */ +#define IS_PA_TO_RX1 BIT_29 /* Packet Arb Timeout Rx1 */ +#define IS_PA_TO_RX2 BIT_28 /* Packet Arb Timeout Rx2 */ +#define IS_PA_TO_TX1 BIT_27 /* Packet Arb Timeout Tx1 */ +#define IS_PA_TO_TX2 BIT_26 /* Packet Arb Timeout Tx2 */ +#define IS_I2C_READY BIT_25 /* IRQ on end of I2C Tx */ +#define IS_IRQ_SW BIT_24 /* SW forced IRQ */ +#define IS_EXT_REG BIT_23 /* IRQ from LM80 or PHY (GENESIS only) */ + /* IRQ from PHY (YUKON only) */ +#define IS_TIMINT BIT_22 /* IRQ from Timer */ +#define IS_MAC1 BIT_21 /* IRQ from MAC 1 */ +#define IS_LNK_SYNC_M1 BIT_20 /* Link Sync Cnt wrap MAC 1 */ +#define IS_MAC2 BIT_19 /* IRQ from MAC 2 */ +#define IS_LNK_SYNC_M2 BIT_18 /* Link Sync Cnt wrap MAC 2 */ +/* Receive Queue 1 */ +#define IS_R1_B BIT_17 /* Q_R1 End of Buffer */ +#define IS_R1_F BIT_16 /* Q_R1 End of Frame */ +#define IS_R1_C BIT_15 /* Q_R1 Encoding Error */ +/* Receive Queue 2 */ +#define IS_R2_B BIT_14 /* Q_R2 End of Buffer */ +#define IS_R2_F BIT_13 /* Q_R2 End of Frame */ +#define IS_R2_C BIT_12 /* Q_R2 Encoding Error */ +/* Synchronous Transmit Queue 1 */ +#define IS_XS1_B BIT_11 /* Q_XS1 End of Buffer */ +#define IS_XS1_F BIT_10 /* Q_XS1 End of Frame */ +#define IS_XS1_C BIT_9 /* Q_XS1 Encoding Error */ +/* Asynchronous Transmit Queue 1 */ +#define IS_XA1_B BIT_8 /* Q_XA1 End of Buffer */ +#define IS_XA1_F BIT_7 /* Q_XA1 End of Frame */ +#define IS_XA1_C BIT_6 /* Q_XA1 Encoding Error */ +/* Synchronous Transmit Queue 2 */ +#define IS_XS2_B BIT_5 /* Q_XS2 End of Buffer */ +#define IS_XS2_F BIT_4 /* Q_XS2 End of Frame */ +#define IS_XS2_C BIT_3 /* Q_XS2 Encoding Error */ +/* Asynchronous Transmit Queue 2 */ +#define IS_XA2_B BIT_2 /* Q_XA2 End of Buffer */ +#define IS_XA2_F BIT_1 /* Q_XA2 End of Frame */ +#define IS_XA2_C BIT_0 /* Q_XA2 Encoding Error */ + + +/* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */ +/* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */ +/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */ +#define IS_ERR_MSK 0x00000fffL /* All Error bits */ + /* Bit 31..14: reserved */ +#define IS_IRQ_TIST_OV BIT_13 /* Time Stamp Timer Overflow (YUKON only) */ +#define IS_IRQ_SENSOR BIT_12 /* IRQ from Sensor (YUKON only) */ +#define IS_IRQ_MST_ERR BIT_11 /* IRQ master error detected */ +#define IS_IRQ_STAT BIT_10 /* IRQ status exception */ +#define IS_NO_STAT_M1 BIT_9 /* No Rx Status from MAC 1 */ +#define IS_NO_STAT_M2 BIT_8 /* No Rx Status from MAC 2 */ +#define IS_NO_TIST_M1 BIT_7 /* No Time Stamp from MAC 1 */ +#define IS_NO_TIST_M2 BIT_6 /* No Time Stamp from MAC 2 */ +#define IS_RAM_RD_PAR BIT_5 /* RAM Read Parity Error */ +#define IS_RAM_WR_PAR BIT_4 /* RAM Write Parity Error */ +#define IS_M1_PAR_ERR BIT_3 /* MAC 1 Parity Error */ +#define IS_M2_PAR_ERR BIT_2 /* MAC 2 Parity Error */ +#define IS_R1_PAR_ERR BIT_1 /* Queue R1 Parity Error */ +#define IS_R2_PAR_ERR BIT_0 /* Queue R2 Parity Error */ + +/* B2_CONN_TYP 8 bit Connector type */ +/* B2_PMD_TYP 8 bit PMD type */ +/* Values of connector and PMD type comply to SysKonnect internal std */ + +/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */ +#define CFG_CHIP_R_MSK (0xf<<4) /* Bit 7.. 4: Chip Revision */ + /* Bit 3.. 2: reserved */ +#define CFG_DIS_M2_CLK BIT_1S /* Disable Clock for 2nd MAC */ +#define CFG_SNG_MAC BIT_0S /* MAC Config: 0=2 MACs / 1=1 MAC*/ + +/* B2_CHIP_ID 8 bit Chip Identification Number */ +#define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */ +#define CHIP_ID_YUKON 0xb0 /* Chip ID for YUKON */ +#define CHIP_ID_YUKON_LITE 0xb1 /* Chip ID for YUKON-Lite (Rev. A1-A3) */ +#define CHIP_ID_YUKON_LP 0xb2 /* Chip ID for YUKON-LP */ + +#define CHIP_REV_YU_LITE_A1 3 /* Chip Rev. for YUKON-Lite A1,A2 */ +#define CHIP_REV_YU_LITE_A3 7 /* Chip Rev. for YUKON-Lite A3 */ + +/* B2_FAR 32 bit Flash-Prom Addr Reg/Cnt */ +#define FAR_ADDR 0x1ffffL /* Bit 16.. 0: FPROM Address mask */ + +/* B2_LD_CTRL 8 bit EPROM loader control register */ +/* Bits are currently reserved */ + +/* B2_LD_TEST 8 bit EPROM loader test register */ + /* Bit 7.. 4: reserved */ +#define LD_T_ON BIT_3S /* Loader Test mode on */ +#define LD_T_OFF BIT_2S /* Loader Test mode off */ +#define LD_T_STEP BIT_1S /* Decrement FPROM addr. Counter */ +#define LD_START BIT_0S /* Start loading FPROM */ + +/* + * Timer Section + */ +/* B2_TI_CTRL 8 bit Timer control */ +/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */ + /* Bit 7.. 3: reserved */ +#define TIM_START BIT_2S /* Start Timer */ +#define TIM_STOP BIT_1S /* Stop Timer */ +#define TIM_CLR_IRQ BIT_0S /* Clear Timer IRQ (!IRQM) */ + +/* B2_TI_TEST 8 Bit Timer Test */ +/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */ +/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */ + /* Bit 7.. 3: reserved */ +#define TIM_T_ON BIT_2S /* Test mode on */ +#define TIM_T_OFF BIT_1S /* Test mode off */ +#define TIM_T_STEP BIT_0S /* Test step */ + +/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */ +/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */ + /* Bit 31..24: reserved */ +#define DPT_MSK 0x00ffffffL /* Bit 23.. 0: Desc Poll Timer Bits */ + +/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */ + /* Bit 7.. 2: reserved */ +#define DPT_START BIT_1S /* Start Descriptor Poll Timer */ +#define DPT_STOP BIT_0S /* Stop Descriptor Poll Timer */ + +/* B2_E_3 8 bit lower 4 bits used for HW self test result */ +#define B2_E3_RES_MASK 0x0f + +/* B2_TST_CTRL1 8 bit Test Control Register 1 */ +#define TST_FRC_DPERR_MR BIT_7S /* force DATAPERR on MST RD */ +#define TST_FRC_DPERR_MW BIT_6S /* force DATAPERR on MST WR */ +#define TST_FRC_DPERR_TR BIT_5S /* force DATAPERR on TRG RD */ +#define TST_FRC_DPERR_TW BIT_4S /* force DATAPERR on TRG WR */ +#define TST_FRC_APERR_M BIT_3S /* force ADDRPERR on MST */ +#define TST_FRC_APERR_T BIT_2S /* force ADDRPERR on TRG */ +#define TST_CFG_WRITE_ON BIT_1S /* Enable Config Reg WR */ +#define TST_CFG_WRITE_OFF BIT_0S /* Disable Config Reg WR */ + +/* B2_TST_CTRL2 8 bit Test Control Register 2 */ + /* Bit 7.. 4: reserved */ + /* force the following error on the next master read/write */ +#define TST_FRC_DPERR_MR64 BIT_3S /* DataPERR RD 64 */ +#define TST_FRC_DPERR_MW64 BIT_2S /* DataPERR WR 64 */ +#define TST_FRC_APERR_1M64 BIT_1S /* AddrPERR on 1. phase */ +#define TST_FRC_APERR_2M64 BIT_0S /* AddrPERR on 2. phase */ + +/* B2_GP_IO 32 bit General Purpose I/O Register */ + /* Bit 31..26: reserved */ +#define GP_DIR_9 BIT_25 /* IO_9 direct, 0=In/1=Out */ +#define GP_DIR_8 BIT_24 /* IO_8 direct, 0=In/1=Out */ +#define GP_DIR_7 BIT_23 /* IO_7 direct, 0=In/1=Out */ +#define GP_DIR_6 BIT_22 /* IO_6 direct, 0=In/1=Out */ +#define GP_DIR_5 BIT_21 /* IO_5 direct, 0=In/1=Out */ +#define GP_DIR_4 BIT_20 /* IO_4 direct, 0=In/1=Out */ +#define GP_DIR_3 BIT_19 /* IO_3 direct, 0=In/1=Out */ +#define GP_DIR_2 BIT_18 /* IO_2 direct, 0=In/1=Out */ +#define GP_DIR_1 BIT_17 /* IO_1 direct, 0=In/1=Out */ +#define GP_DIR_0 BIT_16 /* IO_0 direct, 0=In/1=Out */ + /* Bit 15..10: reserved */ +#define GP_IO_9 BIT_9 /* IO_9 pin */ +#define GP_IO_8 BIT_8 /* IO_8 pin */ +#define GP_IO_7 BIT_7 /* IO_7 pin */ +#define GP_IO_6 BIT_6 /* IO_6 pin */ +#define GP_IO_5 BIT_5 /* IO_5 pin */ +#define GP_IO_4 BIT_4 /* IO_4 pin */ +#define GP_IO_3 BIT_3 /* IO_3 pin */ +#define GP_IO_2 BIT_2 /* IO_2 pin */ +#define GP_IO_1 BIT_1 /* IO_1 pin */ +#define GP_IO_0 BIT_0 /* IO_0 pin */ + +/* B2_I2C_CTRL 32 bit I2C HW Control Register */ +#define I2C_FLAG BIT_31 /* Start read/write if WR */ +#define I2C_ADDR (0x7fffL<<16) /* Bit 30..16: Addr to be RD/WR */ +#define I2C_DEV_SEL (0x7fL<<9) /* Bit 15.. 9: I2C Device Select */ + /* Bit 8.. 5: reserved */ +#define I2C_BURST_LEN BIT_4 /* Burst Len, 1/4 bytes */ +#define I2C_DEV_SIZE (7<<1) /* Bit 3.. 1: I2C Device Size */ +#define I2C_025K_DEV (0<<1) /* 0: 256 Bytes or smal. */ +#define I2C_05K_DEV (1<<1) /* 1: 512 Bytes */ +#define I2C_1K_DEV (2<<1) /* 2: 1024 Bytes */ +#define I2C_2K_DEV (3<<1) /* 3: 2048 Bytes */ +#define I2C_4K_DEV (4<<1) /* 4: 4096 Bytes */ +#define I2C_8K_DEV (5<<1) /* 5: 8192 Bytes */ +#define I2C_16K_DEV (6<<1) /* 6: 16384 Bytes */ +#define I2C_32K_DEV (7<<1) /* 7: 32768 Bytes */ +#define I2C_STOP BIT_0 /* Interrupt I2C transfer */ + +/* B2_I2C_IRQ 32 bit I2C HW IRQ Register */ + /* Bit 31.. 1 reserved */ +#define I2C_CLR_IRQ BIT_0 /* Clear I2C IRQ */ + +/* B2_I2C_SW 32 bit (8 bit access) I2C HW SW Port Register */ + /* Bit 7.. 3: reserved */ +#define I2C_DATA_DIR BIT_2S /* direction of I2C_DATA */ +#define I2C_DATA BIT_1S /* I2C Data Port */ +#define I2C_CLK BIT_0S /* I2C Clock Port */ + +/* + * I2C Address + */ +#define I2C_SENS_ADDR LM80_ADDR /* I2C Sensor Address, (Volt and Temp)*/ + + +/* B2_BSC_CTRL 8 bit Blink Source Counter Control */ + /* Bit 7.. 2: reserved */ +#define BSC_START BIT_1S /* Start Blink Source Counter */ +#define BSC_STOP BIT_0S /* Stop Blink Source Counter */ + +/* B2_BSC_STAT 8 bit Blink Source Counter Status */ + /* Bit 7.. 1: reserved */ +#define BSC_SRC BIT_0S /* Blink Source, 0=Off / 1=On */ + +/* B2_BSC_TST 16 bit Blink Source Counter Test Reg */ +#define BSC_T_ON BIT_2S /* Test mode on */ +#define BSC_T_OFF BIT_1S /* Test mode off */ +#define BSC_T_STEP BIT_0S /* Test step */ + + +/* B3_RAM_ADDR 32 bit RAM Address, to read or write */ + /* Bit 31..19: reserved */ +#define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */ + +/* RAM Interface Registers */ +/* B3_RI_CTRL 16 bit RAM Iface Control Register */ + /* Bit 15..10: reserved */ +#define RI_CLR_RD_PERR BIT_9S /* Clear IRQ RAM Read Parity Err */ +#define RI_CLR_WR_PERR BIT_8S /* Clear IRQ RAM Write Parity Err*/ + /* Bit 7.. 2: reserved */ +#define RI_RST_CLR BIT_1S /* Clear RAM Interface Reset */ +#define RI_RST_SET BIT_0S /* Set RAM Interface Reset */ + +/* B3_RI_TEST 8 bit RAM Iface Test Register */ + /* Bit 15.. 4: reserved */ +#define RI_T_EV BIT_3S /* Timeout Event occured */ +#define RI_T_ON BIT_2S /* Timeout Timer Test On */ +#define RI_T_OFF BIT_1S /* Timeout Timer Test Off */ +#define RI_T_STEP BIT_0S /* Timeout Timer Step */ + +/* MAC Arbiter Registers */ +/* B3_MA_TO_CTRL 16 bit MAC Arbiter Timeout Ctrl Reg */ + /* Bit 15.. 4: reserved */ +#define MA_FOE_ON BIT_3S /* XMAC Fast Output Enable ON */ +#define MA_FOE_OFF BIT_2S /* XMAC Fast Output Enable OFF */ +#define MA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */ +#define MA_RST_SET BIT_0S /* Set MAC Arbiter Reset */ + +/* B3_MA_RC_CTRL 16 bit MAC Arbiter Recovery Ctrl Reg */ + /* Bit 15.. 8: reserved */ +#define MA_ENA_REC_TX2 BIT_7S /* Enable Recovery Timer TX2 */ +#define MA_DIS_REC_TX2 BIT_6S /* Disable Recovery Timer TX2 */ +#define MA_ENA_REC_TX1 BIT_5S /* Enable Recovery Timer TX1 */ +#define MA_DIS_REC_TX1 BIT_4S /* Disable Recovery Timer TX1 */ +#define MA_ENA_REC_RX2 BIT_3S /* Enable Recovery Timer RX2 */ +#define MA_DIS_REC_RX2 BIT_2S /* Disable Recovery Timer RX2 */ +#define MA_ENA_REC_RX1 BIT_1S /* Enable Recovery Timer RX1 */ +#define MA_DIS_REC_RX1 BIT_0S /* Disable Recovery Timer RX1 */ + +/* Packet Arbiter Registers */ +/* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */ + /* Bit 15..14: reserved */ +#define PA_CLR_TO_TX2 BIT_13S /* Clear IRQ Packet Timeout TX2 */ +#define PA_CLR_TO_TX1 BIT_12S /* Clear IRQ Packet Timeout TX1 */ +#define PA_CLR_TO_RX2 BIT_11S /* Clear IRQ Packet Timeout RX2 */ +#define PA_CLR_TO_RX1 BIT_10S /* Clear IRQ Packet Timeout RX1 */ +#define PA_ENA_TO_TX2 BIT_9S /* Enable Timeout Timer TX2 */ +#define PA_DIS_TO_TX2 BIT_8S /* Disable Timeout Timer TX2 */ +#define PA_ENA_TO_TX1 BIT_7S /* Enable Timeout Timer TX1 */ +#define PA_DIS_TO_TX1 BIT_6S /* Disable Timeout Timer TX1 */ +#define PA_ENA_TO_RX2 BIT_5S /* Enable Timeout Timer RX2 */ +#define PA_DIS_TO_RX2 BIT_4S /* Disable Timeout Timer RX2 */ +#define PA_ENA_TO_RX1 BIT_3S /* Enable Timeout Timer RX1 */ +#define PA_DIS_TO_RX1 BIT_2S /* Disable Timeout Timer RX1 */ +#define PA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */ +#define PA_RST_SET BIT_0S /* Set MAC Arbiter Reset */ + +#define PA_ENA_TO_ALL (PA_ENA_TO_RX1 | PA_ENA_TO_RX2 |\ + PA_ENA_TO_TX1 | PA_ENA_TO_TX2) + +/* Rx/Tx Path related Arbiter Test Registers */ +/* B3_MA_TO_TEST 16 bit MAC Arbiter Timeout Test Reg */ +/* B3_MA_RC_TEST 16 bit MAC Arbiter Recovery Test Reg */ +/* B3_PA_TEST 16 bit Packet Arbiter Test Register */ +/* Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */ +#define TX2_T_EV BIT_15S /* TX2 Timeout/Recv Event occured */ +#define TX2_T_ON BIT_14S /* TX2 Timeout/Recv Timer Test On */ +#define TX2_T_OFF BIT_13S /* TX2 Timeout/Recv Timer Tst Off */ +#define TX2_T_STEP BIT_12S /* TX2 Timeout/Recv Timer Step */ +#define TX1_T_EV BIT_11S /* TX1 Timeout/Recv Event occured */ +#define TX1_T_ON BIT_10S /* TX1 Timeout/Recv Timer Test On */ +#define TX1_T_OFF BIT_9S /* TX1 Timeout/Recv Timer Tst Off */ +#define TX1_T_STEP BIT_8S /* TX1 Timeout/Recv Timer Step */ +#define RX2_T_EV BIT_7S /* RX2 Timeout/Recv Event occured */ +#define RX2_T_ON BIT_6S /* RX2 Timeout/Recv Timer Test On */ +#define RX2_T_OFF BIT_5S /* RX2 Timeout/Recv Timer Tst Off */ +#define RX2_T_STEP BIT_4S /* RX2 Timeout/Recv Timer Step */ +#define RX1_T_EV BIT_3S /* RX1 Timeout/Recv Event occured */ +#define RX1_T_ON BIT_2S /* RX1 Timeout/Recv Timer Test On */ +#define RX1_T_OFF BIT_1S /* RX1 Timeout/Recv Timer Tst Off */ +#define RX1_T_STEP BIT_0S /* RX1 Timeout/Recv Timer Step */ + + +/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ +/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */ +/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */ +/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */ +/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */ + /* Bit 31..24: reserved */ +#define TXA_MAX_VAL 0x00ffffffUL/* Bit 23.. 0: Max TXA Timer/Cnt Val */ + +/* TXA_CTRL 8 bit Tx Arbiter Control Register */ +#define TXA_ENA_FSYNC BIT_7S /* Enable force of sync Tx queue */ +#define TXA_DIS_FSYNC BIT_6S /* Disable force of sync Tx queue */ +#define TXA_ENA_ALLOC BIT_5S /* Enable alloc of free bandwidth */ +#define TXA_DIS_ALLOC BIT_4S /* Disable alloc of free bandwidth */ +#define TXA_START_RC BIT_3S /* Start sync Rate Control */ +#define TXA_STOP_RC BIT_2S /* Stop sync Rate Control */ +#define TXA_ENA_ARB BIT_1S /* Enable Tx Arbiter */ +#define TXA_DIS_ARB BIT_0S /* Disable Tx Arbiter */ + +/* TXA_TEST 8 bit Tx Arbiter Test Register */ + /* Bit 7.. 6: reserved */ +#define TXA_INT_T_ON BIT_5S /* Tx Arb Interval Timer Test On */ +#define TXA_INT_T_OFF BIT_4S /* Tx Arb Interval Timer Test Off */ +#define TXA_INT_T_STEP BIT_3S /* Tx Arb Interval Timer Step */ +#define TXA_LIM_T_ON BIT_2S /* Tx Arb Limit Timer Test On */ +#define TXA_LIM_T_OFF BIT_1S /* Tx Arb Limit Timer Test Off */ +#define TXA_LIM_T_STEP BIT_0S /* Tx Arb Limit Timer Step */ + +/* TXA_STAT 8 bit Tx Arbiter Status Register */ + /* Bit 7.. 1: reserved */ +#define TXA_PRIO_XS BIT_0S /* sync queue has prio to send */ + +/* Q_BC 32 bit Current Byte Counter */ + /* Bit 31..16: reserved */ +#define BC_MAX 0xffff /* Bit 15.. 0: Byte counter */ + +/* BMU Control Status Registers */ +/* B0_R1_CSR 32 bit BMU Ctrl/Stat Rx Queue 1 */ +/* B0_R2_CSR 32 bit BMU Ctrl/Stat Rx Queue 2 */ +/* B0_XA1_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */ +/* B0_XS1_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 1 */ +/* B0_XA2_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */ +/* B0_XS2_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 2 */ +/* Q_CSR 32 bit BMU Control/Status Register */ + /* Bit 31..25: reserved */ +#define CSR_SV_IDLE BIT_24 /* BMU SM Idle */ + /* Bit 23..22: reserved */ +#define CSR_DESC_CLR BIT_21 /* Clear Reset for Descr */ +#define CSR_DESC_SET BIT_20 /* Set Reset for Descr */ +#define CSR_FIFO_CLR BIT_19 /* Clear Reset for FIFO */ +#define CSR_FIFO_SET BIT_18 /* Set Reset for FIFO */ +#define CSR_HPI_RUN BIT_17 /* Release HPI SM */ +#define CSR_HPI_RST BIT_16 /* Reset HPI SM to Idle */ +#define CSR_SV_RUN BIT_15 /* Release Supervisor SM */ +#define CSR_SV_RST BIT_14 /* Reset Supervisor SM */ +#define CSR_DREAD_RUN BIT_13 /* Release Descr Read SM */ +#define CSR_DREAD_RST BIT_12 /* Reset Descr Read SM */ +#define CSR_DWRITE_RUN BIT_11 /* Release Descr Write SM */ +#define CSR_DWRITE_RST BIT_10 /* Reset Descr Write SM */ +#define CSR_TRANS_RUN BIT_9 /* Release Transfer SM */ +#define CSR_TRANS_RST BIT_8 /* Reset Transfer SM */ +#define CSR_ENA_POL BIT_7 /* Enable Descr Polling */ +#define CSR_DIS_POL BIT_6 /* Disable Descr Polling */ +#define CSR_STOP BIT_5 /* Stop Rx/Tx Queue */ +#define CSR_START BIT_4 /* Start Rx/Tx Queue */ +#define CSR_IRQ_CL_P BIT_3 /* (Rx) Clear Parity IRQ */ +#define CSR_IRQ_CL_B BIT_2 /* Clear EOB IRQ */ +#define CSR_IRQ_CL_F BIT_1 /* Clear EOF IRQ */ +#define CSR_IRQ_CL_C BIT_0 /* Clear ERR IRQ */ + +#define CSR_SET_RESET (CSR_DESC_SET | CSR_FIFO_SET | CSR_HPI_RST |\ + CSR_SV_RST | CSR_DREAD_RST | CSR_DWRITE_RST |\ + CSR_TRANS_RST) +#define CSR_CLR_RESET (CSR_DESC_CLR | CSR_FIFO_CLR | CSR_HPI_RUN |\ + CSR_SV_RUN | CSR_DREAD_RUN | CSR_DWRITE_RUN |\ + CSR_TRANS_RUN) + +/* Q_F 32 bit Flag Register */ + /* Bit 31..28: reserved */ +#define F_ALM_FULL BIT_27 /* Rx FIFO: almost full */ +#define F_EMPTY BIT_27 /* Tx FIFO: empty flag */ +#define F_FIFO_EOF BIT_26 /* Tag (EOF Flag) bit in FIFO */ +#define F_WM_REACHED BIT_25 /* Watermark reached */ + /* reserved */ +#define F_FIFO_LEVEL (0x1fL<<16) /* Bit 23..16: # of Qwords in FIFO */ + /* Bit 15..11: reserved */ +#define F_WATER_MARK 0x0007ffL /* Bit 10.. 0: Watermark */ + +/* Q_T1 32 bit Test Register 1 */ +/* Holds four State Machine control Bytes */ +#define SM_CTRL_SV_MSK (0xffL<<24) /* Bit 31..24: Control Supervisor SM */ +#define SM_CTRL_RD_MSK (0xffL<<16) /* Bit 23..16: Control Read Desc SM */ +#define SM_CTRL_WR_MSK (0xffL<<8) /* Bit 15.. 8: Control Write Desc SM */ +#define SM_CTRL_TR_MSK 0xffL /* Bit 7.. 0: Control Transfer SM */ + +/* Q_T1_TR 8 bit Test Register 1 Transfer SM */ +/* Q_T1_WR 8 bit Test Register 1 Write Descriptor SM */ +/* Q_T1_RD 8 bit Test Register 1 Read Descriptor SM */ +/* Q_T1_SV 8 bit Test Register 1 Supervisor SM */ + +/* The control status byte of each machine looks like ... */ +#define SM_STATE 0xf0 /* Bit 7.. 4: State which shall be loaded */ +#define SM_LOAD BIT_3S /* Load the SM with SM_STATE */ +#define SM_TEST_ON BIT_2S /* Switch on SM Test Mode */ +#define SM_TEST_OFF BIT_1S /* Go off the Test Mode */ +#define SM_STEP BIT_0S /* Step the State Machine */ +/* The encoding of the states is not supported by the Diagnostics Tool */ + +/* Q_T2 32 bit Test Register 2 */ + /* Bit 31.. 8: reserved */ +#define T2_AC_T_ON BIT_7 /* Address Counter Test Mode on */ +#define T2_AC_T_OFF BIT_6 /* Address Counter Test Mode off */ +#define T2_BC_T_ON BIT_5 /* Byte Counter Test Mode on */ +#define T2_BC_T_OFF BIT_4 /* Byte Counter Test Mode off */ +#define T2_STEP04 BIT_3 /* Inc AC/Dec BC by 4 */ +#define T2_STEP03 BIT_2 /* Inc AC/Dec BC by 3 */ +#define T2_STEP02 BIT_1 /* Inc AC/Dec BC by 2 */ +#define T2_STEP01 BIT_0 /* Inc AC/Dec BC by 1 */ + +/* Q_T3 32 bit Test Register 3 */ + /* Bit 31.. 7: reserved */ +#define T3_MUX_MSK (7<<4) /* Bit 6.. 4: Mux Position */ + /* Bit 3: reserved */ +#define T3_VRAM_MSK 7 /* Bit 2.. 0: Virtual RAM Buffer Address */ + +/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */ +/* RB_START 32 bit RAM Buffer Start Address */ +/* RB_END 32 bit RAM Buffer End Address */ +/* RB_WP 32 bit RAM Buffer Write Pointer */ +/* RB_RP 32 bit RAM Buffer Read Pointer */ +/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */ +/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */ +/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */ +/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */ +/* RB_PC 32 bit RAM Buffer Packet Counter */ +/* RB_LEV 32 bit RAM Buffer Level Register */ + /* Bit 31..19: reserved */ +#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */ + +/* RB_TST2 8 bit RAM Buffer Test Register 2 */ + /* Bit 7.. 4: reserved */ +#define RB_PC_DEC BIT_3S /* Packet Counter Decrem */ +#define RB_PC_T_ON BIT_2S /* Packet Counter Test On */ +#define RB_PC_T_OFF BIT_1S /* Packet Counter Tst Off */ +#define RB_PC_INC BIT_0S /* Packet Counter Increm */ + +/* RB_TST1 8 bit RAM Buffer Test Register 1 */ + /* Bit 7: reserved */ +#define RB_WP_T_ON BIT_6S /* Write Pointer Test On */ +#define RB_WP_T_OFF BIT_5S /* Write Pointer Test Off */ +#define RB_WP_INC BIT_4S /* Write Pointer Increm */ + /* Bit 3: reserved */ +#define RB_RP_T_ON BIT_2S /* Read Pointer Test On */ +#define RB_RP_T_OFF BIT_1S /* Read Pointer Test Off */ +#define RB_RP_DEC BIT_0S /* Read Pointer Decrement */ + +/* RB_CTRL 8 bit RAM Buffer Control Register */ + /* Bit 7.. 6: reserved */ +#define RB_ENA_STFWD BIT_5S /* Enable Store & Forward */ +#define RB_DIS_STFWD BIT_4S /* Disable Store & Forward */ +#define RB_ENA_OP_MD BIT_3S /* Enable Operation Mode */ +#define RB_DIS_OP_MD BIT_2S /* Disable Operation Mode */ +#define RB_RST_CLR BIT_1S /* Clear RAM Buf STM Reset */ +#define RB_RST_SET BIT_0S /* Set RAM Buf STM Reset */ + + +/* Receive and Transmit MAC FIFO Registers (GENESIS only) */ + +/* RX_MFF_EA 32 bit Receive MAC FIFO End Address */ +/* RX_MFF_WP 32 bit Receive MAC FIFO Write Pointer */ +/* RX_MFF_RP 32 bit Receive MAC FIFO Read Pointer */ +/* RX_MFF_PC 32 bit Receive MAC FIFO Packet Counter */ +/* RX_MFF_LEV 32 bit Receive MAC FIFO Level */ +/* TX_MFF_EA 32 bit Transmit MAC FIFO End Address */ +/* TX_MFF_WP 32 bit Transmit MAC FIFO Write Pointer */ +/* TX_MFF_WSP 32 bit Transmit MAC FIFO WR Shadow Pointer */ +/* TX_MFF_RP 32 bit Transmit MAC FIFO Read Pointer */ +/* TX_MFF_PC 32 bit Transmit MAC FIFO Packet Cnt */ +/* TX_MFF_LEV 32 bit Transmit MAC FIFO Level */ + /* Bit 31.. 6: reserved */ +#define MFF_MSK 0x007fL /* Bit 5.. 0: MAC FIFO Address/Ptr Bits */ + +/* RX_MFF_CTRL1 16 bit Receive MAC FIFO Control Reg 1 */ + /* Bit 15..14: reserved */ +#define MFF_ENA_RDY_PAT BIT_13S /* Enable Ready Patch */ +#define MFF_DIS_RDY_PAT BIT_12S /* Disable Ready Patch */ +#define MFF_ENA_TIM_PAT BIT_11S /* Enable Timing Patch */ +#define MFF_DIS_TIM_PAT BIT_10S /* Disable Timing Patch */ +#define MFF_ENA_ALM_FUL BIT_9S /* Enable AlmostFull Sign */ +#define MFF_DIS_ALM_FUL BIT_8S /* Disable AlmostFull Sign */ +#define MFF_ENA_PAUSE BIT_7S /* Enable Pause Signaling */ +#define MFF_DIS_PAUSE BIT_6S /* Disable Pause Signaling */ +#define MFF_ENA_FLUSH BIT_5S /* Enable Frame Flushing */ +#define MFF_DIS_FLUSH BIT_4S /* Disable Frame Flushing */ +#define MFF_ENA_TIST BIT_3S /* Enable Time Stamp Gener */ +#define MFF_DIS_TIST BIT_2S /* Disable Time Stamp Gener */ +#define MFF_CLR_INTIST BIT_1S /* Clear IRQ No Time Stamp */ +#define MFF_CLR_INSTAT BIT_0S /* Clear IRQ No Status */ + +#define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT + +/* TX_MFF_CTRL1 16 bit Transmit MAC FIFO Control Reg 1 */ +#define MFF_CLR_PERR BIT_15S /* Clear Parity Error IRQ */ + /* Bit 14: reserved */ +#define MFF_ENA_PKT_REC BIT_13S /* Enable Packet Recovery */ +#define MFF_DIS_PKT_REC BIT_12S /* Disable Packet Recovery */ +/* MFF_ENA_TIM_PAT (see RX_MFF_CTRL1) Bit 11: Enable Timing Patch */ +/* MFF_DIS_TIM_PAT (see RX_MFF_CTRL1) Bit 10: Disable Timing Patch */ +/* MFF_ENA_ALM_FUL (see RX_MFF_CTRL1) Bit 9: Enable Almost Full Sign */ +/* MFF_DIS_ALM_FUL (see RX_MFF_CTRL1) Bit 8: Disable Almost Full Sign */ +#define MFF_ENA_W4E BIT_7S /* Enable Wait for Empty */ +#define MFF_DIS_W4E BIT_6S /* Disable Wait for Empty */ +/* MFF_ENA_FLUSH (see RX_MFF_CTRL1) Bit 5: Enable Frame Flushing */ +/* MFF_DIS_FLUSH (see RX_MFF_CTRL1) Bit 4: Disable Frame Flushing */ +#define MFF_ENA_LOOPB BIT_3S /* Enable Loopback */ +#define MFF_DIS_LOOPB BIT_2S /* Disable Loopback */ +#define MFF_CLR_MAC_RST BIT_1S /* Clear XMAC Reset */ +#define MFF_SET_MAC_RST BIT_0S /* Set XMAC Reset */ + +#define MFF_TX_CTRL_DEF (MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH) + +/* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */ +/* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */ + /* Bit 7: reserved */ +#define MFF_WSP_T_ON BIT_6S /* Tx: Write Shadow Ptr TestOn */ +#define MFF_WSP_T_OFF BIT_5S /* Tx: Write Shadow Ptr TstOff */ +#define MFF_WSP_INC BIT_4S /* Tx: Write Shadow Ptr Increment */ +#define MFF_PC_DEC BIT_3S /* Packet Counter Decrement */ +#define MFF_PC_T_ON BIT_2S /* Packet Counter Test On */ +#define MFF_PC_T_OFF BIT_1S /* Packet Counter Test Off */ +#define MFF_PC_INC BIT_0S /* Packet Counter Increment */ + +/* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */ +/* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */ + /* Bit 7: reserved */ +#define MFF_WP_T_ON BIT_6S /* Write Pointer Test On */ +#define MFF_WP_T_OFF BIT_5S /* Write Pointer Test Off */ +#define MFF_WP_INC BIT_4S /* Write Pointer Increm */ + /* Bit 3: reserved */ +#define MFF_RP_T_ON BIT_2S /* Read Pointer Test On */ +#define MFF_RP_T_OFF BIT_1S /* Read Pointer Test Off */ +#define MFF_RP_DEC BIT_0S /* Read Pointer Decrement */ + +/* RX_MFF_CTRL2 8 bit Receive MAC FIFO Control Reg 2 */ +/* TX_MFF_CTRL2 8 bit Transmit MAC FIFO Control Reg 2 */ + /* Bit 7..4: reserved */ +#define MFF_ENA_OP_MD BIT_3S /* Enable Operation Mode */ +#define MFF_DIS_OP_MD BIT_2S /* Disable Operation Mode */ +#define MFF_RST_CLR BIT_1S /* Clear MAC FIFO Reset */ +#define MFF_RST_SET BIT_0S /* Set MAC FIFO Reset */ + + +/* Link LED Counter Registers (GENESIS only) */ + +/* RX_LED_CTRL 8 bit Receive LED Cnt Control Reg */ +/* TX_LED_CTRL 8 bit Transmit LED Cnt Control Reg */ +/* LNK_SYNC_CTRL 8 bit Link Sync Cnt Control Register */ + /* Bit 7.. 3: reserved */ +#define LED_START BIT_2S /* Start Timer */ +#define LED_STOP BIT_1S /* Stop Timer */ +#define LED_STATE BIT_0S /* Rx/Tx: LED State, 1=LED on */ +#define LED_CLR_IRQ BIT_0S /* Lnk: Clear Link IRQ */ + +/* RX_LED_TST 8 bit Receive LED Cnt Test Register */ +/* TX_LED_TST 8 bit Transmit LED Cnt Test Register */ +/* LNK_SYNC_TST 8 bit Link Sync Cnt Test Register */ + /* Bit 7.. 3: reserved */ +#define LED_T_ON BIT_2S /* LED Counter Test mode On */ +#define LED_T_OFF BIT_1S /* LED Counter Test mode Off */ +#define LED_T_STEP BIT_0S /* LED Counter Step */ + +/* LNK_LED_REG 8 bit Link LED Register */ + /* Bit 7.. 6: reserved */ +#define LED_BLK_ON BIT_5S /* Link LED Blinking On */ +#define LED_BLK_OFF BIT_4S /* Link LED Blinking Off */ +#define LED_SYNC_ON BIT_3S /* Use Sync Wire to switch LED */ +#define LED_SYNC_OFF BIT_2S /* Disable Sync Wire Input */ +#define LED_ON BIT_1S /* switch LED on */ +#define LED_OFF BIT_0S /* switch LED off */ + +/* Receive and Transmit GMAC FIFO Registers (YUKON only) */ + +/* RX_GMF_EA 32 bit Rx GMAC FIFO End Address */ +/* RX_GMF_AF_THR 32 bit Rx GMAC FIFO Almost Full Thresh. */ +/* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */ +/* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */ +/* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */ +/* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */ +/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */ +/* TX_GMF_AE_THR 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ +/* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */ +/* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Ptr. */ +/* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */ +/* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */ +/* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */ +/* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */ + +/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */ + /* Bits 31..15: reserved */ +#define GMF_WP_TST_ON BIT_14 /* Write Pointer Test On */ +#define GMF_WP_TST_OFF BIT_13 /* Write Pointer Test Off */ +#define GMF_WP_STEP BIT_12 /* Write Pointer Step/Increment */ + /* Bit 11: reserved */ +#define GMF_RP_TST_ON BIT_10 /* Read Pointer Test On */ +#define GMF_RP_TST_OFF BIT_9 /* Read Pointer Test Off */ +#define GMF_RP_STEP BIT_8 /* Read Pointer Step/Increment */ +#define GMF_RX_F_FL_ON BIT_7 /* Rx FIFO Flush Mode On */ +#define GMF_RX_F_FL_OFF BIT_6 /* Rx FIFO Flush Mode Off */ +#define GMF_CLI_RX_FO BIT_5 /* Clear IRQ Rx FIFO Overrun */ +#define GMF_CLI_RX_FC BIT_4 /* Clear IRQ Rx Frame Complete */ +#define GMF_OPER_ON BIT_3 /* Operational Mode On */ +#define GMF_OPER_OFF BIT_2 /* Operational Mode Off */ +#define GMF_RST_CLR BIT_1 /* Clear GMAC FIFO Reset */ +#define GMF_RST_SET BIT_0 /* Set GMAC FIFO Reset */ + +/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */ + /* Bits 31..19: reserved */ +#define GMF_WSP_TST_ON BIT_18 /* Write Shadow Pointer Test On */ +#define GMF_WSP_TST_OFF BIT_17 /* Write Shadow Pointer Test Off */ +#define GMF_WSP_STEP BIT_16 /* Write Shadow Pointer Step/Increment */ + /* Bits 15..7: same as for RX_GMF_CTRL_T */ +#define GMF_CLI_TX_FU BIT_6 /* Clear IRQ Tx FIFO Underrun */ +#define GMF_CLI_TX_FC BIT_5 /* Clear IRQ Tx Frame Complete */ +#define GMF_CLI_TX_PE BIT_4 /* Clear IRQ Tx Parity Error */ + /* Bits 3..0: same as for RX_GMF_CTRL_T */ + +#define GMF_RX_CTRL_DEF (GMF_OPER_ON | GMF_RX_F_FL_ON) +#define GMF_TX_CTRL_DEF GMF_OPER_ON + +#define RX_GMF_FL_THR_DEF 0x0a /* Rx GMAC FIFO Flush Threshold default */ + +/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */ + /* Bit 7.. 3: reserved */ +#define GMT_ST_START BIT_2S /* Start Time Stamp Timer */ +#define GMT_ST_STOP BIT_1S /* Stop Time Stamp Timer */ +#define GMT_ST_CLR_IRQ BIT_0S /* Clear Time Stamp Timer IRQ */ + +/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */ + /* Bits 31.. 8: reserved */ +#define GMC_H_BURST_ON BIT_7 /* Half Duplex Burst Mode On */ +#define GMC_H_BURST_OFF BIT_6 /* Half Duplex Burst Mode Off */ +#define GMC_F_LOOPB_ON BIT_5 /* FIFO Loopback On */ +#define GMC_F_LOOPB_OFF BIT_4 /* FIFO Loopback Off */ +#define GMC_PAUSE_ON BIT_3 /* Pause On */ +#define GMC_PAUSE_OFF BIT_2 /* Pause Off */ +#define GMC_RST_CLR BIT_1 /* Clear GMAC Reset */ +#define GMC_RST_SET BIT_0 /* Set GMAC Reset */ + +/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */ + /* Bits 31..29: reserved */ +#define GPC_SEL_BDT BIT_28 /* Select Bi-Dir. Transfer for MDC/MDIO */ +#define GPC_INT_POL_HI BIT_27 /* IRQ Polarity is Active HIGH */ +#define GPC_75_OHM BIT_26 /* Use 75 Ohm Termination instead of 50 */ +#define GPC_DIS_FC BIT_25 /* Disable Automatic Fiber/Copper Detection */ +#define GPC_DIS_SLEEP BIT_24 /* Disable Energy Detect */ +#define GPC_HWCFG_M_3 BIT_23 /* HWCFG_MODE[3] */ +#define GPC_HWCFG_M_2 BIT_22 /* HWCFG_MODE[2] */ +#define GPC_HWCFG_M_1 BIT_21 /* HWCFG_MODE[1] */ +#define GPC_HWCFG_M_0 BIT_20 /* HWCFG_MODE[0] */ +#define GPC_ANEG_0 BIT_19 /* ANEG[0] */ +#define GPC_ENA_XC BIT_18 /* Enable MDI crossover */ +#define GPC_DIS_125 BIT_17 /* Disable 125 MHz clock */ +#define GPC_ANEG_3 BIT_16 /* ANEG[3] */ +#define GPC_ANEG_2 BIT_15 /* ANEG[2] */ +#define GPC_ANEG_1 BIT_14 /* ANEG[1] */ +#define GPC_ENA_PAUSE BIT_13 /* Enable Pause (SYM_OR_REM) */ +#define GPC_PHYADDR_4 BIT_12 /* Bit 4 of Phy Addr */ +#define GPC_PHYADDR_3 BIT_11 /* Bit 3 of Phy Addr */ +#define GPC_PHYADDR_2 BIT_10 /* Bit 2 of Phy Addr */ +#define GPC_PHYADDR_1 BIT_9 /* Bit 1 of Phy Addr */ +#define GPC_PHYADDR_0 BIT_8 /* Bit 0 of Phy Addr */ + /* Bits 7..2: reserved */ +#define GPC_RST_CLR BIT_1 /* Clear GPHY Reset */ +#define GPC_RST_SET BIT_0 /* Set GPHY Reset */ + +#define GPC_HWCFG_GMII_COP (GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | \ + GPC_HWCFG_M_1 | GPC_HWCFG_M_0) + +#define GPC_HWCFG_GMII_FIB ( GPC_HWCFG_M_2 | \ + GPC_HWCFG_M_1 | GPC_HWCFG_M_0) + +#define GPC_ANEG_ADV_ALL_M (GPC_ANEG_3 | GPC_ANEG_2 | \ + GPC_ANEG_1 | GPC_ANEG_0) + +/* forced speed and duplex mode (don't mix with other ANEG bits) */ +#define GPC_FRC10MBIT_HALF 0 +#define GPC_FRC10MBIT_FULL GPC_ANEG_0 +#define GPC_FRC100MBIT_HALF GPC_ANEG_1 +#define GPC_FRC100MBIT_FULL (GPC_ANEG_0 | GPC_ANEG_1) + +/* auto-negotiation with limited advertised speeds */ +/* mix only with master/slave settings (for copper) */ +#define GPC_ADV_1000_HALF GPC_ANEG_2 +#define GPC_ADV_1000_FULL GPC_ANEG_3 +#define GPC_ADV_ALL (GPC_ANEG_2 | GPC_ANEG_3) + +/* master/slave settings */ +/* only for copper with 1000 Mbps */ +#define GPC_FORCE_MASTER 0 +#define GPC_FORCE_SLAVE GPC_ANEG_0 +#define GPC_PREF_MASTER GPC_ANEG_1 +#define GPC_PREF_SLAVE (GPC_ANEG_1 | GPC_ANEG_0) + +/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */ +/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */ +#define GM_IS_TX_CO_OV BIT_5 /* Transmit Counter Overflow IRQ */ +#define GM_IS_RX_CO_OV BIT_4 /* Receive Counter Overflow IRQ */ +#define GM_IS_TX_FF_UR BIT_3 /* Transmit FIFO Underrun */ +#define GM_IS_TX_COMPL BIT_2 /* Frame Transmission Complete */ +#define GM_IS_RX_FF_OR BIT_1 /* Receive FIFO Overrun */ +#define GM_IS_RX_COMPL BIT_0 /* Frame Reception Complete */ + +#define GMAC_DEF_MSK (GM_IS_TX_CO_OV | GM_IS_RX_CO_OV | \ + GM_IS_TX_FF_UR) + +/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */ + /* Bits 15.. 2: reserved */ +#define GMLC_RST_CLR BIT_1S /* Clear GMAC Link Reset */ +#define GMLC_RST_SET BIT_0S /* Set GMAC Link Reset */ + + +/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */ +#define WOL_CTL_LINK_CHG_OCC BIT_15S +#define WOL_CTL_MAGIC_PKT_OCC BIT_14S +#define WOL_CTL_PATTERN_OCC BIT_13S + +#define WOL_CTL_CLEAR_RESULT BIT_12S + +#define WOL_CTL_ENA_PME_ON_LINK_CHG BIT_11S +#define WOL_CTL_DIS_PME_ON_LINK_CHG BIT_10S +#define WOL_CTL_ENA_PME_ON_MAGIC_PKT BIT_9S +#define WOL_CTL_DIS_PME_ON_MAGIC_PKT BIT_8S +#define WOL_CTL_ENA_PME_ON_PATTERN BIT_7S +#define WOL_CTL_DIS_PME_ON_PATTERN BIT_6S + +#define WOL_CTL_ENA_LINK_CHG_UNIT BIT_5S +#define WOL_CTL_DIS_LINK_CHG_UNIT BIT_4S +#define WOL_CTL_ENA_MAGIC_PKT_UNIT BIT_3S +#define WOL_CTL_DIS_MAGIC_PKT_UNIT BIT_2S +#define WOL_CTL_ENA_PATTERN_UNIT BIT_1S +#define WOL_CTL_DIS_PATTERN_UNIT BIT_0S + +#define WOL_CTL_DEFAULT \ + (WOL_CTL_DIS_PME_ON_LINK_CHG | \ + WOL_CTL_DIS_PME_ON_PATTERN | \ + WOL_CTL_DIS_PME_ON_MAGIC_PKT | \ + WOL_CTL_DIS_LINK_CHG_UNIT | \ + WOL_CTL_DIS_PATTERN_UNIT | \ + WOL_CTL_DIS_MAGIC_PKT_UNIT) + +/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */ +#define WOL_CTL_PATT_ENA(x) (BIT_0 << (x)) + +#define SK_NUM_WOL_PATTERN 7 +#define SK_PATTERN_PER_WORD 4 +#define SK_BITMASK_PATTERN 7 +#define SK_POW_PATTERN_LENGTH 128 + +#define WOL_LENGTH_MSK 0x7f +#define WOL_LENGTH_SHIFT 8 + + +/* Receive and Transmit Descriptors ******************************************/ + +/* Transmit Descriptor struct */ +typedef struct s_HwTxd { + SK_U32 volatile TxCtrl; /* Transmit Buffer Control Field */ + SK_U32 TxNext; /* Physical Address Pointer to the next TxD */ + SK_U32 TxAdrLo; /* Physical Tx Buffer Address lower dword */ + SK_U32 TxAdrHi; /* Physical Tx Buffer Address upper dword */ + SK_U32 TxStat; /* Transmit Frame Status Word */ +#ifndef SK_USE_REV_DESC + SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */ + SK_U16 TxRes1; /* 16 bit reserved field */ + SK_U16 TxTcpWp; /* TCP Checksum Write Position */ + SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */ +#else /* SK_USE_REV_DESC */ + SK_U16 TxRes1; /* 16 bit reserved field */ + SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */ + SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */ + SK_U16 TxTcpWp; /* TCP Checksum Write Position */ +#endif /* SK_USE_REV_DESC */ + SK_U32 TxRes2; /* 32 bit reserved field */ +} SK_HWTXD; + +/* Receive Descriptor struct */ +typedef struct s_HwRxd { + SK_U32 volatile RxCtrl; /* Receive Buffer Control Field */ + SK_U32 RxNext; /* Physical Address Pointer to the next RxD */ + SK_U32 RxAdrLo; /* Physical Rx Buffer Address lower dword */ + SK_U32 RxAdrHi; /* Physical Rx Buffer Address upper dword */ + SK_U32 RxStat; /* Receive Frame Status Word */ + SK_U32 RxTiSt; /* Receive Time Stamp (from XMAC on GENESIS) */ +#ifndef SK_USE_REV_DESC + SK_U16 RxTcpSum1; /* TCP Checksum 1 */ + SK_U16 RxTcpSum2; /* TCP Checksum 2 */ + SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */ + SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */ +#else /* SK_USE_REV_DESC */ + SK_U16 RxTcpSum2; /* TCP Checksum 2 */ + SK_U16 RxTcpSum1; /* TCP Checksum 1 */ + SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */ + SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */ +#endif /* SK_USE_REV_DESC */ +} SK_HWRXD; + +/* + * Drivers which use the reverse descriptor feature (PCI_OUR_REG_2) + * should set the define SK_USE_REV_DESC. + * Structures are 'normaly' not endianess dependent. But in + * this case the SK_U16 fields are bound to bit positions inside the + * descriptor. RxTcpSum1 e.g. must start at bit 0 within the 6.th DWord. + * The bit positions inside a DWord are of course endianess dependent and + * swaps if the DWord is swapped by the hardware. + */ + + +/* Descriptor Bit Definition */ +/* TxCtrl Transmit Buffer Control Field */ +/* RxCtrl Receive Buffer Control Field */ +#define BMU_OWN BIT_31 /* OWN bit: 0=host/1=BMU */ +#define BMU_STF BIT_30 /* Start of Frame */ +#define BMU_EOF BIT_29 /* End of Frame */ +#define BMU_IRQ_EOB BIT_28 /* Req "End of Buffer" IRQ */ +#define BMU_IRQ_EOF BIT_27 /* Req "End of Frame" IRQ */ +/* TxCtrl specific bits */ +#define BMU_STFWD BIT_26 /* (Tx) Store & Forward Frame */ +#define BMU_NO_FCS BIT_25 /* (Tx) Disable MAC FCS (CRC) generation */ +#define BMU_SW BIT_24 /* (Tx) 1 bit res. for SW use */ +/* RxCtrl specific bits */ +#define BMU_DEV_0 BIT_26 /* (Rx) Transfer data to Dev0 */ +#define BMU_STAT_VAL BIT_25 /* (Rx) Rx Status Valid */ +#define BMU_TIST_VAL BIT_24 /* (Rx) Rx TimeStamp Valid */ + /* Bit 23..16: BMU Check Opcodes */ +#define BMU_CHECK (0x55L<<16) /* Default BMU check */ +#define BMU_TCP_CHECK (0x56L<<16) /* Descr with TCP ext */ +#define BMU_UDP_CHECK (0x57L<<16) /* Descr with UDP ext (YUKON only) */ +#define BMU_BBC 0xffffL /* Bit 15.. 0: Buffer Byte Counter */ + +/* TxStat Transmit Frame Status Word */ +/* RxStat Receive Frame Status Word */ +/* + *Note: TxStat is reserved for ASIC loopback mode only + * + * The Bits of the Status words are defined in xmac_ii.h + * (see XMR_FS bits) + */ + +/* macros ********************************************************************/ + +/* Receive and Transmit Queues */ +#define Q_R1 0x0000 /* Receive Queue 1 */ +#define Q_R2 0x0080 /* Receive Queue 2 */ +#define Q_XS1 0x0200 /* Synchronous Transmit Queue 1 */ +#define Q_XA1 0x0280 /* Asynchronous Transmit Queue 1 */ +#define Q_XS2 0x0300 /* Synchronous Transmit Queue 2 */ +#define Q_XA2 0x0380 /* Asynchronous Transmit Queue 2 */ + +/* + * Macro Q_ADDR() + * + * Use this macro to access the Receive and Transmit Queue Registers. + * + * para: + * Queue Queue to access. + * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2 + * Offs Queue register offset. + * Values: Q_D, Q_DA_L ... Q_T2, Q_T3 + * + * usage SK_IN32(pAC, Q_ADDR(Q_R2, Q_BC), pVal) + */ +#define Q_ADDR(Queue, Offs) (B8_Q_REGS + (Queue) + (Offs)) + +/* + * Macro RB_ADDR() + * + * Use this macro to access the RAM Buffer Registers. + * + * para: + * Queue Queue to access. + * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2 + * Offs Queue register offset. + * Values: RB_START, RB_END ... RB_LEV, RB_CTRL + * + * usage SK_IN32(pAC, RB_ADDR(Q_R2, RB_RP), pVal) + */ +#define RB_ADDR(Queue, Offs) (B16_RAM_REGS + (Queue) + (Offs)) + + +/* MAC Related Registers */ +#define MAC_1 0 /* belongs to the port near the slot */ +#define MAC_2 1 /* belongs to the port far away from the slot */ + +/* + * Macro MR_ADDR() + * + * Use this macro to access a MAC Related Registers inside the ASIC. + * + * para: + * Mac MAC to access. + * Values: MAC_1, MAC_2 + * Offs MAC register offset. + * Values: RX_MFF_EA, RX_MFF_WP ... LNK_LED_REG, + * TX_MFF_EA, TX_MFF_WP ... TX_LED_TST + * + * usage SK_IN32(pAC, MR_ADDR(MAC_1, TX_MFF_EA), pVal) + */ +#define MR_ADDR(Mac, Offs) (((Mac) << 7) + (Offs)) + +#ifdef SK_LITTLE_ENDIAN +#define XM_WORD_LO 0 +#define XM_WORD_HI 1 +#else /* !SK_LITTLE_ENDIAN */ +#define XM_WORD_LO 1 +#define XM_WORD_HI 0 +#endif /* !SK_LITTLE_ENDIAN */ + + +/* + * macros to access the XMAC (GENESIS only) + * + * XM_IN16(), to read a 16 bit register (e.g. XM_MMU_CMD) + * XM_OUT16(), to write a 16 bit register (e.g. XM_MMU_CMD) + * XM_IN32(), to read a 32 bit register (e.g. XM_TX_EV_CNT) + * XM_OUT32(), to write a 32 bit register (e.g. XM_TX_EV_CNT) + * XM_INADDR(), to read a network address register (e.g. XM_SRC_CHK) + * XM_OUTADDR(), to write a network address register (e.g. XM_SRC_CHK) + * XM_INHASH(), to read the XM_HSM_CHK register + * XM_OUTHASH() to write the XM_HSM_CHK register + * + * para: + * Mac XMAC to access values: MAC_1 or MAC_2 + * IoC I/O context needed for SK I/O macros + * Reg XMAC Register to read or write + * (p)Val Value or pointer to the value which should be read or written + * + * usage: XM_OUT16(IoC, MAC_1, XM_MMU_CMD, Value); + */ + +#define XMA(Mac, Reg) \ + ((BASE_XMAC_1 + (Mac) * (BASE_XMAC_2 - BASE_XMAC_1)) | ((Reg) << 1)) + +#define XM_IN16(IoC, Mac, Reg, pVal) \ + SK_IN16((IoC), XMA((Mac), (Reg)), (pVal)) + +#define XM_OUT16(IoC, Mac, Reg, Val) \ + SK_OUT16((IoC), XMA((Mac), (Reg)), (Val)) + +#define XM_IN32(IoC, Mac, Reg, pVal) { \ + SK_IN16((IoC), XMA((Mac), (Reg)), \ + (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_LO]); \ + SK_IN16((IoC), XMA((Mac), (Reg+2)), \ + (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_HI]); \ +} + +#define XM_OUT32(IoC, Mac, Reg, Val) { \ + SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL)); \ + SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)(((Val) >> 16) & 0xffffL));\ +} + +/* Remember: we are always writing to / reading from LITTLE ENDIAN memory */ + +#define XM_INADDR(IoC, Mac, Reg, pVal) { \ + SK_U16 Word; \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \ + pByte[0] = (SK_U8)(Word & 0x00ff); \ + pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \ + pByte[2] = (SK_U8)(Word & 0x00ff); \ + pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \ + pByte[4] = (SK_U8)(Word & 0x00ff); \ + pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ +} + +#define XM_OUTADDR(IoC, Mac, Reg, pVal) { \ + SK_U8 SK_FAR *pByte; \ + pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ + SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \ + (((SK_U16)(pByte[0]) & 0x00ff) | \ + (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ + SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \ + (((SK_U16)(pByte[2]) & 0x00ff) | \ + (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ + SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \ + (((SK_U16)(pByte[4]) & 0x00ff) | \ + (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ +} + +#define XM_INHASH(IoC, Mac, Reg, pVal) { \ + SK_U16 Word; \ + SK_U8 SK_FAR *pByte; \ + pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ + SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \ + pByte[0] = (SK_U8)(Word & 0x00ff); \ + pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \ + pByte[2] = (SK_U8)(Word & 0x00ff); \ + pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \ + pByte[4] = (SK_U8)(Word & 0x00ff); \ + pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), XMA((Mac), (Reg+6)), &Word); \ + pByte[6] = (SK_U8)(Word & 0x00ff); \ + pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \ +} + +#define XM_OUTHASH(IoC, Mac, Reg, pVal) { \ + SK_U8 SK_FAR *pByte; \ + pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ + SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \ + (((SK_U16)(pByte[0]) & 0x00ff)| \ + (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ + SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \ + (((SK_U16)(pByte[2]) & 0x00ff)| \ + (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ + SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \ + (((SK_U16)(pByte[4]) & 0x00ff)| \ + (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ + SK_OUT16((IoC), XMA((Mac), (Reg+6)), (SK_U16) \ + (((SK_U16)(pByte[6]) & 0x00ff)| \ + (((SK_U16)(pByte[7]) << 8) & 0xff00))); \ +} + +/* + * macros to access the GMAC (YUKON only) + * + * GM_IN16(), to read a 16 bit register (e.g. GM_GP_STAT) + * GM_OUT16(), to write a 16 bit register (e.g. GM_GP_CTRL) + * GM_IN32(), to read a 32 bit register (e.g. GM_) + * GM_OUT32(), to write a 32 bit register (e.g. GM_) + * GM_INADDR(), to read a network address register (e.g. GM_SRC_ADDR_1L) + * GM_OUTADDR(), to write a network address register (e.g. GM_SRC_ADDR_2L) + * GM_INHASH(), to read the GM_MC_ADDR_H1 register + * GM_OUTHASH() to write the GM_MC_ADDR_H1 register + * + * para: + * Mac GMAC to access values: MAC_1 or MAC_2 + * IoC I/O context needed for SK I/O macros + * Reg GMAC Register to read or write + * (p)Val Value or pointer to the value which should be read or written + * + * usage: GM_OUT16(IoC, MAC_1, GM_GP_CTRL, Value); + */ + +#define GMA(Mac, Reg) \ + ((BASE_GMAC_1 + (Mac) * (BASE_GMAC_2 - BASE_GMAC_1)) | (Reg)) + +#define GM_IN16(IoC, Mac, Reg, pVal) \ + SK_IN16((IoC), GMA((Mac), (Reg)), (pVal)) + +#define GM_OUT16(IoC, Mac, Reg, Val) \ + SK_OUT16((IoC), GMA((Mac), (Reg)), (Val)) + +#define GM_IN32(IoC, Mac, Reg, pVal) { \ + SK_IN16((IoC), GMA((Mac), (Reg)), \ + (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_LO]); \ + SK_IN16((IoC), GMA((Mac), (Reg+4)), \ + (SK_U16 SK_FAR*)&((SK_U16 SK_FAR*)(pVal))[XM_WORD_HI]); \ +} + +#define GM_OUT32(IoC, Mac, Reg, Val) { \ + SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL)); \ + SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)(((Val) >> 16) & 0xffffL));\ +} + +#define GM_INADDR(IoC, Mac, Reg, pVal) { \ + SK_U16 Word; \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \ + pByte[0] = (SK_U8)(Word & 0x00ff); \ + pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word); \ + pByte[2] = (SK_U8)(Word & 0x00ff); \ + pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word); \ + pByte[4] = (SK_U8)(Word & 0x00ff); \ + pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ +} + +#define GM_OUTADDR(IoC, Mac, Reg, pVal) { \ + SK_U8 SK_FAR *pByte; \ + pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ + SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \ + (((SK_U16)(pByte[0]) & 0x00ff) | \ + (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ + SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16) \ + (((SK_U16)(pByte[2]) & 0x00ff) | \ + (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ + SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16) \ + (((SK_U16)(pByte[4]) & 0x00ff) | \ + (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ +} + +#define GM_INHASH(IoC, Mac, Reg, pVal) { \ + SK_U16 Word; \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \ + pByte[0] = (SK_U8)(Word & 0x00ff); \ + pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word); \ + pByte[2] = (SK_U8)(Word & 0x00ff); \ + pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word); \ + pByte[4] = (SK_U8)(Word & 0x00ff); \ + pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), GMA((Mac), (Reg+12)), &Word); \ + pByte[6] = (SK_U8)(Word & 0x00ff); \ + pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \ +} + +#define GM_OUTHASH(IoC, Mac, Reg, pVal) { \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \ + (((SK_U16)(pByte[0]) & 0x00ff)| \ + (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ + SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16) \ + (((SK_U16)(pByte[2]) & 0x00ff)| \ + (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ + SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16) \ + (((SK_U16)(pByte[4]) & 0x00ff)| \ + (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ + SK_OUT16((IoC), GMA((Mac), (Reg+12)), (SK_U16) \ + (((SK_U16)(pByte[6]) & 0x00ff)| \ + (((SK_U16)(pByte[7]) << 8) & 0xff00))); \ +} + +/* + * Different MAC Types + */ +#define SK_MAC_XMAC 0 /* Xaqti XMAC II */ +#define SK_MAC_GMAC 1 /* Marvell GMAC */ + +/* + * Different PHY Types + */ +#define SK_PHY_XMAC 0 /* integrated in XMAC II */ +#define SK_PHY_BCOM 1 /* Broadcom BCM5400 */ +#define SK_PHY_LONE 2 /* Level One LXT1000 */ +#define SK_PHY_NAT 3 /* National DP83891 */ +#define SK_PHY_MARV_COPPER 4 /* Marvell 88E1011S */ +#define SK_PHY_MARV_FIBER 5 /* Marvell 88E1011S working on fiber */ + +/* + * PHY addresses (bits 12..8 of PHY address reg) + */ +#define PHY_ADDR_XMAC (0<<8) +#define PHY_ADDR_BCOM (1<<8) +#define PHY_ADDR_LONE (3<<8) +#define PHY_ADDR_NAT (0<<8) + +/* GPHY address (bits 15..11 of SMI control reg) */ +#define PHY_ADDR_MARV 0 + +/* + * macros to access the PHY + * + * PHY_READ() read a 16 bit value from the PHY + * PHY_WRITE() write a 16 bit value to the PHY + * + * para: + * IoC I/O context needed for SK I/O macros + * pPort Pointer to port struct for PhyAddr + * Mac XMAC to access values: MAC_1 or MAC_2 + * PhyReg PHY Register to read or write + * (p)Val Value or pointer to the value which should be read or + * written. + * + * usage: PHY_READ(IoC, pPort, MAC_1, PHY_CTRL, Value); + * Warning: a PHY_READ on an uninitialized PHY (PHY still in reset) never + * comes back. This is checked in DEBUG mode. + */ +#ifndef DEBUG +#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \ + SK_U16 Mmu; \ + \ + XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ + XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ + if ((pPort)->PhyType != SK_PHY_XMAC) { \ + do { \ + XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ + } while ((Mmu & XM_MMU_PHY_RDY) == 0); \ + XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ + } \ +} +#else +#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \ + SK_U16 Mmu; \ + int __i = 0; \ + \ + XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ + XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ + if ((pPort)->PhyType != SK_PHY_XMAC) { \ + do { \ + XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ + __i++; \ + if (__i > 100000) { \ + SK_DBG_PRINTF("*****************************\n"); \ + SK_DBG_PRINTF("PHY_READ on uninitialized PHY\n"); \ + SK_DBG_PRINTF("*****************************\n"); \ + break; \ + } \ + } while ((Mmu & XM_MMU_PHY_RDY) == 0); \ + XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ + } \ +} +#endif /* DEBUG */ + +#define PHY_WRITE(IoC, pPort, Mac, PhyReg, Val) { \ + SK_U16 Mmu; \ + \ + if ((pPort)->PhyType != SK_PHY_XMAC) { \ + do { \ + XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ + } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \ + } \ + XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ + XM_OUT16((IoC), (Mac), XM_PHY_DATA, (Val)); \ + if ((pPort)->PhyType != SK_PHY_XMAC) { \ + do { \ + XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ + } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \ + } \ +} + +/* + * Macro PCI_C() + * + * Use this macro to access PCI config register from the I/O space. + * + * para: + * Addr PCI configuration register to access. + * Values: PCI_VENDOR_ID ... PCI_VPD_ADR_REG, + * + * usage SK_IN16(pAC, PCI_C(PCI_VENDOR_ID), pVal); + */ +#define PCI_C(Addr) (B7_CFG_SPC + (Addr)) /* PCI Config Space */ + +/* + * Macro SK_HW_ADDR(Base, Addr) + * + * Calculates the effective HW address + * + * para: + * Base I/O or memory base address + * Addr Address offset + * + * usage: May be used in SK_INxx and SK_OUTxx macros + * #define SK_IN8(pAC, Addr, pVal) ...\ + * *pVal = (SK_U8)inp(SK_HW_ADDR(pAC->Hw.Iop, Addr))) + */ +#ifdef SK_MEM_MAPPED_IO +#define SK_HW_ADDR(Base, Addr) ((Base) + (Addr)) +#else /* SK_MEM_MAPPED_IO */ +#define SK_HW_ADDR(Base, Addr) \ + ((Base) + (((Addr) & 0x7f) | (((Addr) >> 7 > 0) ? 0x80 : 0))) +#endif /* SK_MEM_MAPPED_IO */ + +#define SZ_LONG (sizeof(SK_U32)) + +/* + * Macro SK_HWAC_LINK_LED() + * + * Use this macro to set the link LED mode. + * para: + * pAC Pointer to adapter context struct + * IoC I/O context needed for SK I/O macros + * Port Port number + * Mode Mode to set for this LED + */ +#define SK_HWAC_LINK_LED(pAC, IoC, Port, Mode) \ + SK_OUT8(IoC, MR_ADDR(Port, LNK_LED_REG), Mode); + + +/* typedefs *******************************************************************/ + + +/* function prototypes ********************************************************/ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_SKGEHW_H */ diff --git a/drivers/net/sk98lin/h/skgehwt.h b/drivers/net/sk98lin/h/skgehwt.h new file mode 100644 index 00000000000..e6b0016a695 --- /dev/null +++ b/drivers/net/sk98lin/h/skgehwt.h @@ -0,0 +1,48 @@ +/****************************************************************************** + * + * Name: skhwt.h + * Project: Gigabit Ethernet Adapters, Event Scheduler Module + * Version: $Revision: 1.7 $ + * Date: $Date: 2003/09/16 12:55:08 $ + * Purpose: Defines for the hardware timer functions + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * SKGEHWT.H contains all defines and types for the timer functions + */ + +#ifndef _SKGEHWT_H_ +#define _SKGEHWT_H_ + +/* + * SK Hardware Timer + * - needed wherever the HWT module is used + * - use in Adapters context name pAC->Hwt + */ +typedef struct s_Hwt { + SK_U32 TStart; /* HWT start */ + SK_U32 TStop; /* HWT stop */ + int TActive; /* HWT: flag : active/inactive */ +} SK_HWT; + +extern void SkHwtInit(SK_AC *pAC, SK_IOC Ioc); +extern void SkHwtStart(SK_AC *pAC, SK_IOC Ioc, SK_U32 Time); +extern void SkHwtStop(SK_AC *pAC, SK_IOC Ioc); +extern SK_U32 SkHwtRead(SK_AC *pAC, SK_IOC Ioc); +extern void SkHwtIsr(SK_AC *pAC, SK_IOC Ioc); +#endif /* _SKGEHWT_H_ */ diff --git a/drivers/net/sk98lin/h/skgei2c.h b/drivers/net/sk98lin/h/skgei2c.h new file mode 100644 index 00000000000..d9b6f6d8dfe --- /dev/null +++ b/drivers/net/sk98lin/h/skgei2c.h @@ -0,0 +1,210 @@ +/****************************************************************************** + * + * Name: skgei2c.h + * Project: Gigabit Ethernet Adapters, TWSI-Module + * Version: $Revision: 1.25 $ + * Date: $Date: 2003/10/20 09:06:05 $ + * Purpose: Special defines for TWSI + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * SKGEI2C.H contains all SK-98xx specific defines for the TWSI handling + */ + +#ifndef _INC_SKGEI2C_H_ +#define _INC_SKGEI2C_H_ + +/* + * Macros to access the B2_I2C_CTRL + */ +#define SK_I2C_CTL(IoC, flag, dev, dev_size, reg, burst) \ + SK_OUT32(IoC, B2_I2C_CTRL,\ + (flag ? 0x80000000UL : 0x0L) | \ + (((SK_U32)reg << 16) & I2C_ADDR) | \ + (((SK_U32)dev << 9) & I2C_DEV_SEL) | \ + (dev_size & I2C_DEV_SIZE) | \ + ((burst << 4) & I2C_BURST_LEN)) + +#define SK_I2C_STOP(IoC) { \ + SK_U32 I2cCtrl; \ + SK_IN32(IoC, B2_I2C_CTRL, &I2cCtrl); \ + SK_OUT32(IoC, B2_I2C_CTRL, I2cCtrl | I2C_STOP); \ +} + +#define SK_I2C_GET_CTL(IoC, pI2cCtrl) SK_IN32(IoC, B2_I2C_CTRL, pI2cCtrl) + +/* + * Macros to access the TWSI SW Registers + */ +#define SK_I2C_SET_BIT(IoC, SetBits) { \ + SK_U8 OrgBits; \ + SK_IN8(IoC, B2_I2C_SW, &OrgBits); \ + SK_OUT8(IoC, B2_I2C_SW, OrgBits | (SK_U8)(SetBits)); \ +} + +#define SK_I2C_CLR_BIT(IoC, ClrBits) { \ + SK_U8 OrgBits; \ + SK_IN8(IoC, B2_I2C_SW, &OrgBits); \ + SK_OUT8(IoC, B2_I2C_SW, OrgBits & ~((SK_U8)(ClrBits))); \ +} + +#define SK_I2C_GET_SW(IoC, pI2cSw) SK_IN8(IoC, B2_I2C_SW, pI2cSw) + +/* + * define the possible sensor states + */ +#define SK_SEN_IDLE 0 /* Idle: sensor not read */ +#define SK_SEN_VALUE 1 /* Value Read cycle */ +#define SK_SEN_VALEXT 2 /* Extended Value Read cycle */ + +/* + * Conversion factor to convert read Voltage sensor to milli Volt + * Conversion factor to convert read Temperature sensor to 10th degree Celsius + */ +#define SK_LM80_VT_LSB 22 /* 22mV LSB resolution */ +#define SK_LM80_TEMP_LSB 10 /* 1 degree LSB resolution */ +#define SK_LM80_TEMPEXT_LSB 5 /* 0.5 degree LSB resolution for ext. val. */ + +/* + * formula: counter = (22500*60)/(rpm * divisor * pulses/2) + * assuming: 6500rpm, 4 pulses, divisor 1 + */ +#define SK_LM80_FAN_FAKTOR ((22500L*60)/(1*2)) + +/* + * Define sensor management data + * Maximum is reached on Genesis copper dual port and Yukon-64 + * Board specific maximum is in pAC->I2c.MaxSens + */ +#define SK_MAX_SENSORS 8 /* maximal no. of installed sensors */ +#define SK_MIN_SENSORS 5 /* minimal no. of installed sensors */ + +/* + * To watch the state machine (SM) use the timer in two ways + * instead of one as hitherto + */ +#define SK_TIMER_WATCH_SM 0 /* Watch the SM to finish in a spec. time */ +#define SK_TIMER_NEW_GAUGING 1 /* Start a new gauging when timer expires */ + +/* + * Defines for the individual thresholds + */ + +/* Temperature sensor */ +#define SK_SEN_TEMP_HIGH_ERR 800 /* Temperature High Err Threshold */ +#define SK_SEN_TEMP_HIGH_WARN 700 /* Temperature High Warn Threshold */ +#define SK_SEN_TEMP_LOW_WARN 100 /* Temperature Low Warn Threshold */ +#define SK_SEN_TEMP_LOW_ERR 0 /* Temperature Low Err Threshold */ + +/* VCC which should be 5 V */ +#define SK_SEN_PCI_5V_HIGH_ERR 5588 /* Voltage PCI High Err Threshold */ +#define SK_SEN_PCI_5V_HIGH_WARN 5346 /* Voltage PCI High Warn Threshold */ +#define SK_SEN_PCI_5V_LOW_WARN 4664 /* Voltage PCI Low Warn Threshold */ +#define SK_SEN_PCI_5V_LOW_ERR 4422 /* Voltage PCI Low Err Threshold */ + +/* + * VIO may be 5 V or 3.3 V. Initialization takes two parts: + * 1. Initialize lowest lower limit and highest higher limit. + * 2. After the first value is read correct the upper or the lower limit to + * the appropriate C constant. + * + * Warning limits are +-5% of the exepected voltage. + * Error limits are +-10% of the expected voltage. + */ + +/* Bug fix AF: 16.Aug.2001: Correct the init base of LM80 sensor */ + +#define SK_SEN_PCI_IO_5V_HIGH_ERR 5566 /* + 10% V PCI-IO High Err Threshold */ +#define SK_SEN_PCI_IO_5V_HIGH_WARN 5324 /* + 5% V PCI-IO High Warn Threshold */ + /* 5000 mVolt */ +#define SK_SEN_PCI_IO_5V_LOW_WARN 4686 /* - 5% V PCI-IO Low Warn Threshold */ +#define SK_SEN_PCI_IO_5V_LOW_ERR 4444 /* - 10% V PCI-IO Low Err Threshold */ + +#define SK_SEN_PCI_IO_RANGE_LIMITER 4000 /* 4000 mV range delimiter */ + +/* correction values for the second pass */ +#define SK_SEN_PCI_IO_3V3_HIGH_ERR 3850 /* + 15% V PCI-IO High Err Threshold */ +#define SK_SEN_PCI_IO_3V3_HIGH_WARN 3674 /* + 10% V PCI-IO High Warn Threshold */ + /* 3300 mVolt */ +#define SK_SEN_PCI_IO_3V3_LOW_WARN 2926 /* - 10% V PCI-IO Low Warn Threshold */ +#define SK_SEN_PCI_IO_3V3_LOW_ERR 2772 /* - 15% V PCI-IO Low Err Threshold */ + +/* + * VDD voltage + */ +#define SK_SEN_VDD_HIGH_ERR 3630 /* Voltage ASIC High Err Threshold */ +#define SK_SEN_VDD_HIGH_WARN 3476 /* Voltage ASIC High Warn Threshold */ +#define SK_SEN_VDD_LOW_WARN 3146 /* Voltage ASIC Low Warn Threshold */ +#define SK_SEN_VDD_LOW_ERR 2970 /* Voltage ASIC Low Err Threshold */ + +/* + * PHY PLL 3V3 voltage + */ +#define SK_SEN_PLL_3V3_HIGH_ERR 3630 /* Voltage PMA High Err Threshold */ +#define SK_SEN_PLL_3V3_HIGH_WARN 3476 /* Voltage PMA High Warn Threshold */ +#define SK_SEN_PLL_3V3_LOW_WARN 3146 /* Voltage PMA Low Warn Threshold */ +#define SK_SEN_PLL_3V3_LOW_ERR 2970 /* Voltage PMA Low Err Threshold */ + +/* + * VAUX (YUKON only) + */ +#define SK_SEN_VAUX_3V3_HIGH_ERR 3630 /* Voltage VAUX High Err Threshold */ +#define SK_SEN_VAUX_3V3_HIGH_WARN 3476 /* Voltage VAUX High Warn Threshold */ +#define SK_SEN_VAUX_3V3_LOW_WARN 3146 /* Voltage VAUX Low Warn Threshold */ +#define SK_SEN_VAUX_3V3_LOW_ERR 2970 /* Voltage VAUX Low Err Threshold */ +#define SK_SEN_VAUX_0V_WARN_ERR 0 /* if VAUX not present */ +#define SK_SEN_VAUX_RANGE_LIMITER 1000 /* 1000 mV range delimiter */ + +/* + * PHY 2V5 voltage + */ +#define SK_SEN_PHY_2V5_HIGH_ERR 2750 /* Voltage PHY High Err Threshold */ +#define SK_SEN_PHY_2V5_HIGH_WARN 2640 /* Voltage PHY High Warn Threshold */ +#define SK_SEN_PHY_2V5_LOW_WARN 2376 /* Voltage PHY Low Warn Threshold */ +#define SK_SEN_PHY_2V5_LOW_ERR 2222 /* Voltage PHY Low Err Threshold */ + +/* + * ASIC Core 1V5 voltage (YUKON only) + */ +#define SK_SEN_CORE_1V5_HIGH_ERR 1650 /* Voltage ASIC Core High Err Threshold */ +#define SK_SEN_CORE_1V5_HIGH_WARN 1575 /* Voltage ASIC Core High Warn Threshold */ +#define SK_SEN_CORE_1V5_LOW_WARN 1425 /* Voltage ASIC Core Low Warn Threshold */ +#define SK_SEN_CORE_1V5_LOW_ERR 1350 /* Voltage ASIC Core Low Err Threshold */ + +/* + * FAN 1 speed + */ +/* assuming: 6500rpm +-15%, 4 pulses, + * warning at: 80 % + * error at: 70 % + * no upper limit + */ +#define SK_SEN_FAN_HIGH_ERR 20000 /* FAN Speed High Err Threshold */ +#define SK_SEN_FAN_HIGH_WARN 20000 /* FAN Speed High Warn Threshold */ +#define SK_SEN_FAN_LOW_WARN 5200 /* FAN Speed Low Warn Threshold */ +#define SK_SEN_FAN_LOW_ERR 4550 /* FAN Speed Low Err Threshold */ + +/* + * Some Voltages need dynamic thresholds + */ +#define SK_SEN_DYN_INIT_NONE 0 /* No dynamic init of thresholds */ +#define SK_SEN_DYN_INIT_PCI_IO 10 /* Init PCI-IO with new thresholds */ +#define SK_SEN_DYN_INIT_VAUX 11 /* Init VAUX with new thresholds */ + +extern int SkLm80ReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen); +#endif /* n_INC_SKGEI2C_H */ diff --git a/drivers/net/sk98lin/h/skgeinit.h b/drivers/net/sk98lin/h/skgeinit.h new file mode 100644 index 00000000000..143e635ec24 --- /dev/null +++ b/drivers/net/sk98lin/h/skgeinit.h @@ -0,0 +1,797 @@ +/****************************************************************************** + * + * Name: skgeinit.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.83 $ + * Date: $Date: 2003/09/16 14:07:37 $ + * Purpose: Structures and prototypes for the GE Init Module + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef __INC_SKGEINIT_H_ +#define __INC_SKGEINIT_H_ + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* defines ********************************************************************/ + +#define SK_TEST_VAL 0x11335577UL + +/* modifying Link LED behaviour (used with SkGeLinkLED()) */ +#define SK_LNK_OFF LED_OFF +#define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF) +#define SK_LNK_BLINK (LED_ON | LED_BLK_ON | LED_SYNC_ON) +#define SK_LNK_PERM (LED_ON | LED_BLK_OFF | LED_SYNC_ON) +#define SK_LNK_TST (LED_ON | LED_BLK_ON | LED_SYNC_OFF) + +/* parameter 'Mode' when calling SK_HWAC_LINK_LED() */ +#define SK_LED_OFF LED_OFF +#define SK_LED_ACTIVE (LED_ON | LED_BLK_OFF | LED_SYNC_OFF) +#define SK_LED_STANDBY (LED_ON | LED_BLK_ON | LED_SYNC_OFF) + +/* addressing LED Registers in SkGeXmitLED() */ +#define XMIT_LED_INI 0 +#define XMIT_LED_CNT (RX_LED_VAL - RX_LED_INI) +#define XMIT_LED_CTRL (RX_LED_CTRL- RX_LED_INI) +#define XMIT_LED_TST (RX_LED_TST - RX_LED_INI) + +/* parameter 'Mode' when calling SkGeXmitLED() */ +#define SK_LED_DIS 0 +#define SK_LED_ENA 1 +#define SK_LED_TST 2 + +/* Counter and Timer constants, for a host clock of 62.5 MHz */ +#define SK_XMIT_DUR 0x002faf08UL /* 50 ms */ +#define SK_BLK_DUR 0x01dcd650UL /* 500 ms */ + +#define SK_DPOLL_DEF 0x00ee6b28UL /* 250 ms at 62.5 MHz */ + +#define SK_DPOLL_MAX 0x00ffffffUL /* 268 ms at 62.5 MHz */ + /* 215 ms at 78.12 MHz */ + +#define SK_FACT_62 100 /* is given in percent */ +#define SK_FACT_53 85 /* on GENESIS: 53.12 MHz */ +#define SK_FACT_78 125 /* on YUKON: 78.12 MHz */ + +/* Timeout values */ +#define SK_MAC_TO_53 72 /* MAC arbiter timeout */ +#define SK_PKT_TO_53 0x2000 /* Packet arbiter timeout */ +#define SK_PKT_TO_MAX 0xffff /* Maximum value */ +#define SK_RI_TO_53 36 /* RAM interface timeout */ + +#define SK_PHY_ACC_TO 600000 /* PHY access timeout */ + +/* RAM Buffer High Pause Threshold values */ +#define SK_RB_ULPP ( 8 * 1024) /* Upper Level in kB/8 */ +#define SK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */ +#define SK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */ + +#ifndef SK_BMU_RX_WM +#define SK_BMU_RX_WM 0x600 /* BMU Rx Watermark */ +#endif +#ifndef SK_BMU_TX_WM +#define SK_BMU_TX_WM 0x600 /* BMU Tx Watermark */ +#endif + +/* XMAC II Rx High Watermark */ +#define SK_XM_RX_HI_WM 0x05aa /* 1450 */ + +/* XMAC II Tx Threshold */ +#define SK_XM_THR_REDL 0x01fb /* .. for redundant link usage */ +#define SK_XM_THR_SL 0x01fb /* .. for single link adapters */ +#define SK_XM_THR_MULL 0x01fb /* .. for multiple link usage */ +#define SK_XM_THR_JUMBO 0x03fc /* .. for jumbo frame usage */ + +/* values for GIPortUsage */ +#define SK_RED_LINK 1 /* redundant link usage */ +#define SK_MUL_LINK 2 /* multiple link usage */ +#define SK_JUMBO_LINK 3 /* driver uses jumbo frames */ + +/* Minimum RAM Buffer Rx Queue Size */ +#define SK_MIN_RXQ_SIZE 16 /* 16 kB */ + +/* Minimum RAM Buffer Tx Queue Size */ +#define SK_MIN_TXQ_SIZE 16 /* 16 kB */ + +/* Queue Size units */ +#define QZ_UNITS 0x7 +#define QZ_STEP 8 + +/* Percentage of queue size from whole memory */ +/* 80 % for receive */ +#define RAM_QUOTA_RX 80L +/* 0% for sync transfer */ +#define RAM_QUOTA_SYNC 0L +/* the rest (20%) is taken for async transfer */ + +/* Get the rounded queue size in Bytes in 8k steps */ +#define ROUND_QUEUE_SIZE(SizeInBytes) \ + ((((unsigned long) (SizeInBytes) + (QZ_STEP*1024L)-1) / 1024) & \ + ~(QZ_STEP-1)) + +/* Get the rounded queue size in KBytes in 8k steps */ +#define ROUND_QUEUE_SIZE_KB(Kilobytes) \ + ROUND_QUEUE_SIZE((Kilobytes) * 1024L) + +/* Types of RAM Buffer Queues */ +#define SK_RX_SRAM_Q 1 /* small receive queue */ +#define SK_RX_BRAM_Q 2 /* big receive queue */ +#define SK_TX_RAM_Q 3 /* small or big transmit queue */ + +/* parameter 'Dir' when calling SkGeStopPort() */ +#define SK_STOP_TX 1 /* Stops the transmit path, resets the XMAC */ +#define SK_STOP_RX 2 /* Stops the receive path */ +#define SK_STOP_ALL 3 /* Stops Rx and Tx path, resets the XMAC */ + +/* parameter 'RstMode' when calling SkGeStopPort() */ +#define SK_SOFT_RST 1 /* perform a software reset */ +#define SK_HARD_RST 2 /* perform a hardware reset */ + +/* Init Levels */ +#define SK_INIT_DATA 0 /* Init level 0: init data structures */ +#define SK_INIT_IO 1 /* Init level 1: init with IOs */ +#define SK_INIT_RUN 2 /* Init level 2: init for run time */ + +/* Link Mode Parameter */ +#define SK_LMODE_HALF 1 /* Half Duplex Mode */ +#define SK_LMODE_FULL 2 /* Full Duplex Mode */ +#define SK_LMODE_AUTOHALF 3 /* AutoHalf Duplex Mode */ +#define SK_LMODE_AUTOFULL 4 /* AutoFull Duplex Mode */ +#define SK_LMODE_AUTOBOTH 5 /* AutoBoth Duplex Mode */ +#define SK_LMODE_AUTOSENSE 6 /* configured mode auto sensing */ +#define SK_LMODE_INDETERMINATED 7 /* indeterminated */ + +/* Auto-negotiation timeout in 100ms granularity */ +#define SK_AND_MAX_TO 6 /* Wait 600 msec before link comes up */ + +/* Auto-negotiation error codes */ +#define SK_AND_OK 0 /* no error */ +#define SK_AND_OTHER 1 /* other error than below */ +#define SK_AND_DUP_CAP 2 /* Duplex capabilities error */ + + +/* Link Speed Capabilities */ +#define SK_LSPEED_CAP_AUTO (1<<0) /* Automatic resolution */ +#define SK_LSPEED_CAP_10MBPS (1<<1) /* 10 Mbps */ +#define SK_LSPEED_CAP_100MBPS (1<<2) /* 100 Mbps */ +#define SK_LSPEED_CAP_1000MBPS (1<<3) /* 1000 Mbps */ +#define SK_LSPEED_CAP_INDETERMINATED (1<<4) /* indeterminated */ + +/* Link Speed Parameter */ +#define SK_LSPEED_AUTO 1 /* Automatic resolution */ +#define SK_LSPEED_10MBPS 2 /* 10 Mbps */ +#define SK_LSPEED_100MBPS 3 /* 100 Mbps */ +#define SK_LSPEED_1000MBPS 4 /* 1000 Mbps */ +#define SK_LSPEED_INDETERMINATED 5 /* indeterminated */ + +/* Link Speed Current State */ +#define SK_LSPEED_STAT_UNKNOWN 1 +#define SK_LSPEED_STAT_10MBPS 2 +#define SK_LSPEED_STAT_100MBPS 3 +#define SK_LSPEED_STAT_1000MBPS 4 +#define SK_LSPEED_STAT_INDETERMINATED 5 + + +/* Link Capability Parameter */ +#define SK_LMODE_CAP_HALF (1<<0) /* Half Duplex Mode */ +#define SK_LMODE_CAP_FULL (1<<1) /* Full Duplex Mode */ +#define SK_LMODE_CAP_AUTOHALF (1<<2) /* AutoHalf Duplex Mode */ +#define SK_LMODE_CAP_AUTOFULL (1<<3) /* AutoFull Duplex Mode */ +#define SK_LMODE_CAP_INDETERMINATED (1<<4) /* indeterminated */ + +/* Link Mode Current State */ +#define SK_LMODE_STAT_UNKNOWN 1 /* Unknown Duplex Mode */ +#define SK_LMODE_STAT_HALF 2 /* Half Duplex Mode */ +#define SK_LMODE_STAT_FULL 3 /* Full Duplex Mode */ +#define SK_LMODE_STAT_AUTOHALF 4 /* Half Duplex Mode obtained by Auto-Neg */ +#define SK_LMODE_STAT_AUTOFULL 5 /* Full Duplex Mode obtained by Auto-Neg */ +#define SK_LMODE_STAT_INDETERMINATED 6 /* indeterminated */ + +/* Flow Control Mode Parameter (and capabilities) */ +#define SK_FLOW_MODE_NONE 1 /* No Flow-Control */ +#define SK_FLOW_MODE_LOC_SEND 2 /* Local station sends PAUSE */ +#define SK_FLOW_MODE_SYMMETRIC 3 /* Both stations may send PAUSE */ +#define SK_FLOW_MODE_SYM_OR_REM 4 /* Both stations may send PAUSE or + * just the remote station may send PAUSE + */ +#define SK_FLOW_MODE_INDETERMINATED 5 /* indeterminated */ + +/* Flow Control Status Parameter */ +#define SK_FLOW_STAT_NONE 1 /* No Flow Control */ +#define SK_FLOW_STAT_REM_SEND 2 /* Remote Station sends PAUSE */ +#define SK_FLOW_STAT_LOC_SEND 3 /* Local station sends PAUSE */ +#define SK_FLOW_STAT_SYMMETRIC 4 /* Both station may send PAUSE */ +#define SK_FLOW_STAT_INDETERMINATED 5 /* indeterminated */ + +/* Master/Slave Mode Capabilities */ +#define SK_MS_CAP_AUTO (1<<0) /* Automatic resolution */ +#define SK_MS_CAP_MASTER (1<<1) /* This station is master */ +#define SK_MS_CAP_SLAVE (1<<2) /* This station is slave */ +#define SK_MS_CAP_INDETERMINATED (1<<3) /* indeterminated */ + +/* Set Master/Slave Mode Parameter (and capabilities) */ +#define SK_MS_MODE_AUTO 1 /* Automatic resolution */ +#define SK_MS_MODE_MASTER 2 /* This station is master */ +#define SK_MS_MODE_SLAVE 3 /* This station is slave */ +#define SK_MS_MODE_INDETERMINATED 4 /* indeterminated */ + +/* Master/Slave Status Parameter */ +#define SK_MS_STAT_UNSET 1 /* The M/S status is not set */ +#define SK_MS_STAT_MASTER 2 /* This station is master */ +#define SK_MS_STAT_SLAVE 3 /* This station is slave */ +#define SK_MS_STAT_FAULT 4 /* M/S resolution failed */ +#define SK_MS_STAT_INDETERMINATED 5 /* indeterminated */ + +/* parameter 'Mode' when calling SkXmSetRxCmd() */ +#define SK_STRIP_FCS_ON (1<<0) /* Enable FCS stripping of Rx frames */ +#define SK_STRIP_FCS_OFF (1<<1) /* Disable FCS stripping of Rx frames */ +#define SK_STRIP_PAD_ON (1<<2) /* Enable pad byte stripping of Rx fr */ +#define SK_STRIP_PAD_OFF (1<<3) /* Disable pad byte stripping of Rx fr */ +#define SK_LENERR_OK_ON (1<<4) /* Don't chk fr for in range len error */ +#define SK_LENERR_OK_OFF (1<<5) /* Check frames for in range len error */ +#define SK_BIG_PK_OK_ON (1<<6) /* Don't set Rx Error bit for big frames */ +#define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */ +#define SK_SELF_RX_ON (1<<8) /* Enable Rx of own packets */ +#define SK_SELF_RX_OFF (1<<9) /* Disable Rx of own packets */ + +/* parameter 'Para' when calling SkMacSetRxTxEn() */ +#define SK_MAC_LOOPB_ON (1<<0) /* Enable MAC Loopback Mode */ +#define SK_MAC_LOOPB_OFF (1<<1) /* Disable MAC Loopback Mode */ +#define SK_PHY_LOOPB_ON (1<<2) /* Enable PHY Loopback Mode */ +#define SK_PHY_LOOPB_OFF (1<<3) /* Disable PHY Loopback Mode */ +#define SK_PHY_FULLD_ON (1<<4) /* Enable GMII Full Duplex */ +#define SK_PHY_FULLD_OFF (1<<5) /* Disable GMII Full Duplex */ + +/* States of PState */ +#define SK_PRT_RESET 0 /* the port is reset */ +#define SK_PRT_STOP 1 /* the port is stopped (similar to SW reset) */ +#define SK_PRT_INIT 2 /* the port is initialized */ +#define SK_PRT_RUN 3 /* the port has an active link */ + +/* PHY power down modes */ +#define PHY_PM_OPERATIONAL_MODE 0 /* PHY operational mode */ +#define PHY_PM_DEEP_SLEEP 1 /* coma mode --> minimal power */ +#define PHY_PM_IEEE_POWER_DOWN 2 /* IEEE 22.2.4.1.5 compl. power down */ +#define PHY_PM_ENERGY_DETECT 3 /* energy detect */ +#define PHY_PM_ENERGY_DETECT_PLUS 4 /* energy detect plus */ + +/* Default receive frame limit for Workaround of XMAC Errata */ +#define SK_DEF_RX_WA_LIM SK_CONSTU64(100) + +/* values for GILedBlinkCtrl (LED Blink Control) */ +#define SK_ACT_LED_BLINK (1<<0) /* Active LED blinking */ +#define SK_DUP_LED_NORMAL (1<<1) /* Duplex LED normal */ +#define SK_LED_LINK100_ON (1<<2) /* Link 100M LED on */ + +/* Link Partner Status */ +#define SK_LIPA_UNKNOWN 0 /* Link partner is in unknown state */ +#define SK_LIPA_MANUAL 1 /* Link partner is in detected manual state */ +#define SK_LIPA_AUTO 2 /* Link partner is in auto-negotiation state */ + +/* Maximum Restarts before restart is ignored (3Com WA) */ +#define SK_MAX_LRESTART 3 /* Max. 3 times the link is restarted */ + +/* Max. Auto-neg. timeouts before link detection in sense mode is reset */ +#define SK_MAX_ANEG_TO 10 /* Max. 10 times the sense mode is reset */ + +/* structures *****************************************************************/ + +/* + * MAC specific functions + */ +typedef struct s_GeMacFunc { + int (*pFnMacUpdateStats)(SK_AC *pAC, SK_IOC IoC, unsigned int Port); + int (*pFnMacStatistic)(SK_AC *pAC, SK_IOC IoC, unsigned int Port, + SK_U16 StatAddr, SK_U32 SK_FAR *pVal); + int (*pFnMacResetCounter)(SK_AC *pAC, SK_IOC IoC, unsigned int Port); + int (*pFnMacOverflow)(SK_AC *pAC, SK_IOC IoC, unsigned int Port, + SK_U16 IStatus, SK_U64 SK_FAR *pVal); +} SK_GEMACFUNC; + +/* + * Port Structure + */ +typedef struct s_GePort { +#ifndef SK_DIAG + SK_TIMER PWaTimer; /* Workaround Timer */ + SK_TIMER HalfDupChkTimer; +#endif /* SK_DIAG */ + SK_U32 PPrevShorts; /* Previous Short Counter checking */ + SK_U32 PPrevFcs; /* Previous FCS Error Counter checking */ + SK_U64 PPrevRx; /* Previous RxOk Counter checking */ + SK_U64 PRxLim; /* Previous RxOk Counter checking */ + SK_U64 LastOctets; /* For half duplex hang check */ + int PLinkResCt; /* Link Restart Counter */ + int PAutoNegTimeOut;/* Auto-negotiation timeout current value */ + int PAutoNegTOCt; /* Auto-negotiation Timeout Counter */ + int PRxQSize; /* Port Rx Queue Size in kB */ + int PXSQSize; /* Port Synchronous Transmit Queue Size in kB */ + int PXAQSize; /* Port Asynchronous Transmit Queue Size in kB */ + SK_U32 PRxQRamStart; /* Receive Queue RAM Buffer Start Address */ + SK_U32 PRxQRamEnd; /* Receive Queue RAM Buffer End Address */ + SK_U32 PXsQRamStart; /* Sync Tx Queue RAM Buffer Start Address */ + SK_U32 PXsQRamEnd; /* Sync Tx Queue RAM Buffer End Address */ + SK_U32 PXaQRamStart; /* Async Tx Queue RAM Buffer Start Address */ + SK_U32 PXaQRamEnd; /* Async Tx Queue RAM Buffer End Address */ + SK_U32 PRxOverCnt; /* Receive Overflow Counter */ + int PRxQOff; /* Rx Queue Address Offset */ + int PXsQOff; /* Synchronous Tx Queue Address Offset */ + int PXaQOff; /* Asynchronous Tx Queue Address Offset */ + int PhyType; /* PHY used on this port */ + int PState; /* Port status (reset, stop, init, run) */ + SK_U16 PhyId1; /* PHY Id1 on this port */ + SK_U16 PhyAddr; /* MDIO/MDC PHY address */ + SK_U16 PIsave; /* Saved Interrupt status word */ + SK_U16 PSsave; /* Saved PHY status word */ + SK_U16 PGmANegAdv; /* Saved GPhy AutoNegAdvertisment register */ + SK_BOOL PHWLinkUp; /* The hardware Link is up (wiring) */ + SK_BOOL PLinkBroken; /* Is Link broken ? */ + SK_BOOL PCheckPar; /* Do we check for parity errors ? */ + SK_BOOL HalfDupTimerActive; + SK_U8 PLinkCap; /* Link Capabilities */ + SK_U8 PLinkModeConf; /* Link Mode configured */ + SK_U8 PLinkMode; /* Link Mode currently used */ + SK_U8 PLinkModeStatus;/* Link Mode Status */ + SK_U8 PLinkSpeedCap; /* Link Speed Capabilities(10/100/1000 Mbps) */ + SK_U8 PLinkSpeed; /* configured Link Speed (10/100/1000 Mbps) */ + SK_U8 PLinkSpeedUsed; /* current Link Speed (10/100/1000 Mbps) */ + SK_U8 PFlowCtrlCap; /* Flow Control Capabilities */ + SK_U8 PFlowCtrlMode; /* Flow Control Mode */ + SK_U8 PFlowCtrlStatus;/* Flow Control Status */ + SK_U8 PMSCap; /* Master/Slave Capabilities */ + SK_U8 PMSMode; /* Master/Slave Mode */ + SK_U8 PMSStatus; /* Master/Slave Status */ + SK_BOOL PAutoNegFail; /* Auto-negotiation fail flag */ + SK_U8 PLipaAutoNeg; /* Auto-negotiation possible with Link Partner */ + SK_U8 PCableLen; /* Cable Length */ + SK_U8 PMdiPairLen[4]; /* MDI[0..3] Pair Length */ + SK_U8 PMdiPairSts[4]; /* MDI[0..3] Pair Diagnostic Status */ + SK_U8 PPhyPowerState; /* PHY current power state */ + int PMacColThres; /* MAC Collision Threshold */ + int PMacJamLen; /* MAC Jam length */ + int PMacJamIpgVal; /* MAC Jam IPG */ + int PMacJamIpgData; /* MAC IPG Jam to Data */ + int PMacIpgData; /* MAC Data IPG */ + SK_BOOL PMacLimit4; /* reset collision counter and backoff algorithm */ +} SK_GEPORT; + +/* + * Gigabit Ethernet Initialization Struct + * (has to be included in the adapter context) + */ +typedef struct s_GeInit { + int GIChipId; /* Chip Identification Number */ + int GIChipRev; /* Chip Revision Number */ + SK_U8 GIPciHwRev; /* PCI HW Revision Number */ + SK_BOOL GIGenesis; /* Genesis adapter ? */ + SK_BOOL GIYukon; /* YUKON-A1/Bx chip */ + SK_BOOL GIYukonLite; /* YUKON-Lite chip */ + SK_BOOL GICopperType; /* Copper Type adapter ? */ + SK_BOOL GIPciSlot64; /* 64-bit PCI Slot */ + SK_BOOL GIPciClock66; /* 66 MHz PCI Clock */ + SK_BOOL GIVauxAvail; /* VAUX available (YUKON) */ + SK_BOOL GIYukon32Bit; /* 32-Bit YUKON adapter */ + SK_U16 GILedBlinkCtrl; /* LED Blink Control */ + int GIMacsFound; /* Number of MACs found on this adapter */ + int GIMacType; /* MAC Type used on this adapter */ + int GIHstClkFact; /* Host Clock Factor (62.5 / HstClk * 100) */ + int GIPortUsage; /* Driver Port Usage */ + int GILevel; /* Initialization Level completed */ + int GIRamSize; /* The RAM size of the adapter in kB */ + int GIWolOffs; /* WOL Register Offset (HW-Bug in Rev. A) */ + SK_U32 GIRamOffs; /* RAM Address Offset for addr calculation */ + SK_U32 GIPollTimerVal; /* Descr. Poll Timer Init Val (HstClk ticks) */ + SK_U32 GIValIrqMask; /* Value for Interrupt Mask */ + SK_U32 GITimeStampCnt; /* Time Stamp High Counter (YUKON only) */ + SK_GEPORT GP[SK_MAX_MACS];/* Port Dependent Information */ + SK_GEMACFUNC GIFunc; /* MAC depedent functions */ +} SK_GEINIT; + +/* + * Error numbers and messages for skxmac2.c and skgeinit.c + */ +#define SKERR_HWI_E001 (SK_ERRBASE_HWINIT) +#define SKERR_HWI_E001MSG "SkXmClrExactAddr() has got illegal parameters" +#define SKERR_HWI_E002 (SKERR_HWI_E001+1) +#define SKERR_HWI_E002MSG "SkGeInit(): Level 1 call missing" +#define SKERR_HWI_E003 (SKERR_HWI_E002+1) +#define SKERR_HWI_E003MSG "SkGeInit() called with illegal init Level" +#define SKERR_HWI_E004 (SKERR_HWI_E003+1) +#define SKERR_HWI_E004MSG "SkGeInitPort(): Queue Size illegal configured" +#define SKERR_HWI_E005 (SKERR_HWI_E004+1) +#define SKERR_HWI_E005MSG "SkGeInitPort(): cannot init running ports" +#define SKERR_HWI_E006 (SKERR_HWI_E005+1) +#define SKERR_HWI_E006MSG "SkGeMacInit(): PState does not match HW state" +#define SKERR_HWI_E007 (SKERR_HWI_E006+1) +#define SKERR_HWI_E007MSG "SkXmInitDupMd() called with invalid Dup Mode" +#define SKERR_HWI_E008 (SKERR_HWI_E007+1) +#define SKERR_HWI_E008MSG "SkXmSetRxCmd() called with invalid Mode" +#define SKERR_HWI_E009 (SKERR_HWI_E008+1) +#define SKERR_HWI_E009MSG "SkGeCfgSync() called although PXSQSize zero" +#define SKERR_HWI_E010 (SKERR_HWI_E009+1) +#define SKERR_HWI_E010MSG "SkGeCfgSync() called with invalid parameters" +#define SKERR_HWI_E011 (SKERR_HWI_E010+1) +#define SKERR_HWI_E011MSG "SkGeInitPort(): Receive Queue Size too small" +#define SKERR_HWI_E012 (SKERR_HWI_E011+1) +#define SKERR_HWI_E012MSG "SkGeInitPort(): invalid Queue Size specified" +#define SKERR_HWI_E013 (SKERR_HWI_E012+1) +#define SKERR_HWI_E013MSG "SkGeInitPort(): cfg changed for running queue" +#define SKERR_HWI_E014 (SKERR_HWI_E013+1) +#define SKERR_HWI_E014MSG "SkGeInitPort(): unknown GIPortUsage specified" +#define SKERR_HWI_E015 (SKERR_HWI_E014+1) +#define SKERR_HWI_E015MSG "Illegal Link mode parameter" +#define SKERR_HWI_E016 (SKERR_HWI_E015+1) +#define SKERR_HWI_E016MSG "Illegal Flow control mode parameter" +#define SKERR_HWI_E017 (SKERR_HWI_E016+1) +#define SKERR_HWI_E017MSG "Illegal value specified for GIPollTimerVal" +#define SKERR_HWI_E018 (SKERR_HWI_E017+1) +#define SKERR_HWI_E018MSG "FATAL: SkGeStopPort() does not terminate (Tx)" +#define SKERR_HWI_E019 (SKERR_HWI_E018+1) +#define SKERR_HWI_E019MSG "Illegal Speed parameter" +#define SKERR_HWI_E020 (SKERR_HWI_E019+1) +#define SKERR_HWI_E020MSG "Illegal Master/Slave parameter" +#define SKERR_HWI_E021 (SKERR_HWI_E020+1) +#define SKERR_HWI_E021MSG "MacUpdateStats(): cannot update statistic counter" +#define SKERR_HWI_E022 (SKERR_HWI_E021+1) +#define SKERR_HWI_E022MSG "MacStatistic(): illegal statistic base address" +#define SKERR_HWI_E023 (SKERR_HWI_E022+1) +#define SKERR_HWI_E023MSG "SkGeInitPort(): Transmit Queue Size too small" +#define SKERR_HWI_E024 (SKERR_HWI_E023+1) +#define SKERR_HWI_E024MSG "FATAL: SkGeStopPort() does not terminate (Rx)" +#define SKERR_HWI_E025 (SKERR_HWI_E024+1) +#define SKERR_HWI_E025MSG "" + +/* function prototypes ********************************************************/ + +#ifndef SK_KR_PROTO + +/* + * public functions in skgeinit.c + */ +extern void SkGePollTxD( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL PollTxD); + +extern void SkGeYellowLED( + SK_AC *pAC, + SK_IOC IoC, + int State); + +extern int SkGeCfgSync( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_U32 IntTime, + SK_U32 LimCount, + int SyncMode); + +extern void SkGeLoadLnkSyncCnt( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_U32 CntVal); + +extern void SkGeStopPort( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Dir, + int RstMode); + +extern int SkGeInit( + SK_AC *pAC, + SK_IOC IoC, + int Level); + +extern void SkGeDeInit( + SK_AC *pAC, + SK_IOC IoC); + +extern int SkGeInitPort( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkGeXmitLED( + SK_AC *pAC, + SK_IOC IoC, + int Led, + int Mode); + +extern int SkGeInitAssignRamToQueues( + SK_AC *pAC, + int ActivePort, + SK_BOOL DualNet); + +/* + * public functions in skxmac2.c + */ +extern void SkMacRxTxDisable( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacSoftRst( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacHardRst( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkXmInitMac( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkGmInitMac( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacInitPhy( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL DoLoop); + +extern void SkMacIrqDisable( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacFlushTxFifo( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacIrq( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern int SkMacAutoNegDone( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacAutoNegLipaPhy( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_U16 IStatus); + +extern int SkMacRxTxEnable( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacPromiscMode( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL Enable); + +extern void SkMacHashing( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL Enable); + +extern void SkXmPhyRead( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 SK_FAR *pVal); + +extern void SkXmPhyWrite( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 Val); + +extern void SkGmPhyRead( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 SK_FAR *pVal); + +extern void SkGmPhyWrite( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 Val); + +extern void SkXmClrExactAddr( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int StartNum, + int StopNum); + +extern void SkXmAutoNegLipaXmac( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_U16 IStatus); + +extern int SkXmUpdateStats( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port); + +extern int SkGmUpdateStats( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port); + +extern int SkXmMacStatistic( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port, + SK_U16 StatAddr, + SK_U32 SK_FAR *pVal); + +extern int SkGmMacStatistic( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port, + SK_U16 StatAddr, + SK_U32 SK_FAR *pVal); + +extern int SkXmResetCounter( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port); + +extern int SkGmResetCounter( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port); + +extern int SkXmOverflowStatus( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port, + SK_U16 IStatus, + SK_U64 SK_FAR *pStatus); + +extern int SkGmOverflowStatus( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port, + SK_U16 MacStatus, + SK_U64 SK_FAR *pStatus); + +extern int SkGmCableDiagStatus( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL StartTest); + +#ifdef SK_DIAG +extern void SkGePhyRead( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 *pVal); + +extern void SkGePhyWrite( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 Val); + +extern void SkMacSetRxCmd( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Mode); +extern void SkMacCrcGener( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL Enable); +extern void SkMacTimeStamp( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL Enable); +extern void SkXmSendCont( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL Enable); +#endif /* SK_DIAG */ + +#else /* SK_KR_PROTO */ + +/* + * public functions in skgeinit.c + */ +extern void SkGePollTxD(); +extern void SkGeYellowLED(); +extern int SkGeCfgSync(); +extern void SkGeLoadLnkSyncCnt(); +extern void SkGeStopPort(); +extern int SkGeInit(); +extern void SkGeDeInit(); +extern int SkGeInitPort(); +extern void SkGeXmitLED(); +extern int SkGeInitAssignRamToQueues(); + +/* + * public functions in skxmac2.c + */ +extern void SkMacRxTxDisable(); +extern void SkMacSoftRst(); +extern void SkMacHardRst(); +extern void SkMacInitPhy(); +extern int SkMacRxTxEnable(); +extern void SkMacPromiscMode(); +extern void SkMacHashing(); +extern void SkMacIrqDisable(); +extern void SkMacFlushTxFifo(); +extern void SkMacIrq(); +extern int SkMacAutoNegDone(); +extern void SkMacAutoNegLipaPhy(); +extern void SkXmInitMac(); +extern void SkXmPhyRead(); +extern void SkXmPhyWrite(); +extern void SkGmInitMac(); +extern void SkGmPhyRead(); +extern void SkGmPhyWrite(); +extern void SkXmClrExactAddr(); +extern void SkXmAutoNegLipaXmac(); +extern int SkXmUpdateStats(); +extern int SkGmUpdateStats(); +extern int SkXmMacStatistic(); +extern int SkGmMacStatistic(); +extern int SkXmResetCounter(); +extern int SkGmResetCounter(); +extern int SkXmOverflowStatus(); +extern int SkGmOverflowStatus(); +extern int SkGmCableDiagStatus(); + +#ifdef SK_DIAG +extern void SkGePhyRead(); +extern void SkGePhyWrite(); +extern void SkMacSetRxCmd(); +extern void SkMacCrcGener(); +extern void SkMacTimeStamp(); +extern void SkXmSendCont(); +#endif /* SK_DIAG */ + +#endif /* SK_KR_PROTO */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_SKGEINIT_H_ */ diff --git a/drivers/net/sk98lin/h/skgepnm2.h b/drivers/net/sk98lin/h/skgepnm2.h new file mode 100644 index 00000000000..ddd304f1a48 --- /dev/null +++ b/drivers/net/sk98lin/h/skgepnm2.h @@ -0,0 +1,334 @@ +/***************************************************************************** + * + * Name: skgepnm2.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.36 $ + * Date: $Date: 2003/05/23 12:45:13 $ + * Purpose: Defines for Private Network Management Interface + * + ****************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef _SKGEPNM2_H_ +#define _SKGEPNM2_H_ + +/* + * General definitions + */ +#define SK_PNMI_CHIPSET_XMAC 1 /* XMAC11800FP */ +#define SK_PNMI_CHIPSET_YUKON 2 /* YUKON */ + +#define SK_PNMI_BUS_PCI 1 /* PCI bus*/ + +/* + * Actions + */ +#define SK_PNMI_ACT_IDLE 1 +#define SK_PNMI_ACT_RESET 2 +#define SK_PNMI_ACT_SELFTEST 3 +#define SK_PNMI_ACT_RESETCNT 4 + +/* + * VPD releated defines + */ + +#define SK_PNMI_VPD_RW 1 +#define SK_PNMI_VPD_RO 2 + +#define SK_PNMI_VPD_OK 0 +#define SK_PNMI_VPD_NOTFOUND 1 +#define SK_PNMI_VPD_CUT 2 +#define SK_PNMI_VPD_TIMEOUT 3 +#define SK_PNMI_VPD_FULL 4 +#define SK_PNMI_VPD_NOWRITE 5 +#define SK_PNMI_VPD_FATAL 6 + +#define SK_PNMI_VPD_IGNORE 0 +#define SK_PNMI_VPD_CREATE 1 +#define SK_PNMI_VPD_DELETE 2 + + +/* + * RLMT related defines + */ +#define SK_PNMI_DEF_RLMT_CHG_THRES 240 /* 4 changes per minute */ + + +/* + * VCT internal status values + */ +#define SK_PNMI_VCT_PENDING 32 +#define SK_PNMI_VCT_TEST_DONE 64 +#define SK_PNMI_VCT_LINK 128 + +/* + * Internal table definitions + */ +#define SK_PNMI_GET 0 +#define SK_PNMI_PRESET 1 +#define SK_PNMI_SET 2 + +#define SK_PNMI_RO 0 +#define SK_PNMI_RW 1 +#define SK_PNMI_WO 2 + +typedef struct s_OidTabEntry { + SK_U32 Id; + SK_U32 InstanceNo; + unsigned int StructSize; + unsigned int Offset; + int Access; + int (* Func)(SK_AC *pAc, SK_IOC pIo, int action, + SK_U32 Id, char* pBuf, unsigned int* pLen, + SK_U32 Instance, unsigned int TableIndex, + SK_U32 NetNumber); + SK_U16 Param; +} SK_PNMI_TAB_ENTRY; + + +/* + * Trap lengths + */ +#define SK_PNMI_TRAP_SIMPLE_LEN 17 +#define SK_PNMI_TRAP_SENSOR_LEN_BASE 46 +#define SK_PNMI_TRAP_RLMT_CHANGE_LEN 23 +#define SK_PNMI_TRAP_RLMT_PORT_LEN 23 + +/* + * Number of MAC types supported + */ +#define SK_PNMI_MAC_TYPES (SK_MAC_GMAC + 1) + +/* + * MAC statistic data list (overall set for MAC types used) + */ +enum SK_MACSTATS { + SK_PNMI_HTX = 0, + SK_PNMI_HTX_OCTET, + SK_PNMI_HTX_OCTETHIGH = SK_PNMI_HTX_OCTET, + SK_PNMI_HTX_OCTETLOW, + SK_PNMI_HTX_BROADCAST, + SK_PNMI_HTX_MULTICAST, + SK_PNMI_HTX_UNICAST, + SK_PNMI_HTX_BURST, + SK_PNMI_HTX_PMACC, + SK_PNMI_HTX_MACC, + SK_PNMI_HTX_COL, + SK_PNMI_HTX_SINGLE_COL, + SK_PNMI_HTX_MULTI_COL, + SK_PNMI_HTX_EXCESS_COL, + SK_PNMI_HTX_LATE_COL, + SK_PNMI_HTX_DEFFERAL, + SK_PNMI_HTX_EXCESS_DEF, + SK_PNMI_HTX_UNDERRUN, + SK_PNMI_HTX_CARRIER, + SK_PNMI_HTX_UTILUNDER, + SK_PNMI_HTX_UTILOVER, + SK_PNMI_HTX_64, + SK_PNMI_HTX_127, + SK_PNMI_HTX_255, + SK_PNMI_HTX_511, + SK_PNMI_HTX_1023, + SK_PNMI_HTX_MAX, + SK_PNMI_HTX_LONGFRAMES, + SK_PNMI_HTX_SYNC, + SK_PNMI_HTX_SYNC_OCTET, + SK_PNMI_HTX_RESERVED, + + SK_PNMI_HRX, + SK_PNMI_HRX_OCTET, + SK_PNMI_HRX_OCTETHIGH = SK_PNMI_HRX_OCTET, + SK_PNMI_HRX_OCTETLOW, + SK_PNMI_HRX_BADOCTET, + SK_PNMI_HRX_BADOCTETHIGH = SK_PNMI_HRX_BADOCTET, + SK_PNMI_HRX_BADOCTETLOW, + SK_PNMI_HRX_BROADCAST, + SK_PNMI_HRX_MULTICAST, + SK_PNMI_HRX_UNICAST, + SK_PNMI_HRX_PMACC, + SK_PNMI_HRX_MACC, + SK_PNMI_HRX_PMACC_ERR, + SK_PNMI_HRX_MACC_UNKWN, + SK_PNMI_HRX_BURST, + SK_PNMI_HRX_MISSED, + SK_PNMI_HRX_FRAMING, + SK_PNMI_HRX_UNDERSIZE, + SK_PNMI_HRX_OVERFLOW, + SK_PNMI_HRX_JABBER, + SK_PNMI_HRX_CARRIER, + SK_PNMI_HRX_IRLENGTH, + SK_PNMI_HRX_SYMBOL, + SK_PNMI_HRX_SHORTS, + SK_PNMI_HRX_RUNT, + SK_PNMI_HRX_TOO_LONG, + SK_PNMI_HRX_FCS, + SK_PNMI_HRX_CEXT, + SK_PNMI_HRX_UTILUNDER, + SK_PNMI_HRX_UTILOVER, + SK_PNMI_HRX_64, + SK_PNMI_HRX_127, + SK_PNMI_HRX_255, + SK_PNMI_HRX_511, + SK_PNMI_HRX_1023, + SK_PNMI_HRX_MAX, + SK_PNMI_HRX_LONGFRAMES, + + SK_PNMI_HRX_RESERVED, + + SK_PNMI_MAX_IDX /* NOTE: Ensure SK_PNMI_CNT_NO is set to this value */ +}; + +/* + * MAC specific data + */ +typedef struct s_PnmiStatAddr { + SK_U16 Reg; /* MAC register containing the value */ + SK_BOOL GetOffset; /* TRUE: Offset managed by PNMI (call GetStatVal())*/ +} SK_PNMI_STATADDR; + + +/* + * SK_PNMI_STRUCT_DATA copy offset evaluation macros + */ +#define SK_PNMI_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e)) +#define SK_PNMI_MAI_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e)) +#define SK_PNMI_VPD_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_VPD *)0)->e)) +#define SK_PNMI_SEN_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_SENSOR *)0)->e)) +#define SK_PNMI_CHK_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_CHECKSUM *)0)->e)) +#define SK_PNMI_STA_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STAT *)0)->e)) +#define SK_PNMI_CNF_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_CONF *)0)->e)) +#define SK_PNMI_RLM_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT *)0)->e)) +#define SK_PNMI_MON_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT_MONITOR *)0)->e)) +#define SK_PNMI_TRP_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_TRAP *)0)->e)) + +#define SK_PNMI_SET_STAT(b,s,o) {SK_U32 Val32; char *pVal; \ + Val32 = (s); \ + pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \ + &(((SK_PNMI_STRUCT_DATA *)0)-> \ + ReturnStatus.ErrorStatus)); \ + SK_PNMI_STORE_U32(pVal, Val32); \ + Val32 = (o); \ + pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \ + &(((SK_PNMI_STRUCT_DATA *)0)-> \ + ReturnStatus.ErrorOffset)); \ + SK_PNMI_STORE_U32(pVal, Val32);} + +/* + * Time macros + */ +#ifndef SK_PNMI_HUNDREDS_SEC +#if SK_TICKS_PER_SEC == 100 +#define SK_PNMI_HUNDREDS_SEC(t) (t) +#else +#define SK_PNMI_HUNDREDS_SEC(t) (((t) * 100) / (SK_TICKS_PER_SEC)) +#endif /* !SK_TICKS_PER_SEC */ +#endif /* !SK_PNMI_HUNDREDS_SEC */ + +/* + * Macros to work around alignment problems + */ +#ifndef SK_PNMI_STORE_U16 +#define SK_PNMI_STORE_U16(p,v) {*(char *)(p) = *((char *)&(v)); \ + *((char *)(p) + 1) = \ + *(((char *)&(v)) + 1);} +#endif + +#ifndef SK_PNMI_STORE_U32 +#define SK_PNMI_STORE_U32(p,v) {*(char *)(p) = *((char *)&(v)); \ + *((char *)(p) + 1) = \ + *(((char *)&(v)) + 1); \ + *((char *)(p) + 2) = \ + *(((char *)&(v)) + 2); \ + *((char *)(p) + 3) = \ + *(((char *)&(v)) + 3);} +#endif + +#ifndef SK_PNMI_STORE_U64 +#define SK_PNMI_STORE_U64(p,v) {*(char *)(p) = *((char *)&(v)); \ + *((char *)(p) + 1) = \ + *(((char *)&(v)) + 1); \ + *((char *)(p) + 2) = \ + *(((char *)&(v)) + 2); \ + *((char *)(p) + 3) = \ + *(((char *)&(v)) + 3); \ + *((char *)(p) + 4) = \ + *(((char *)&(v)) + 4); \ + *((char *)(p) + 5) = \ + *(((char *)&(v)) + 5); \ + *((char *)(p) + 6) = \ + *(((char *)&(v)) + 6); \ + *((char *)(p) + 7) = \ + *(((char *)&(v)) + 7);} +#endif + +#ifndef SK_PNMI_READ_U16 +#define SK_PNMI_READ_U16(p,v) {*((char *)&(v)) = *(char *)(p); \ + *(((char *)&(v)) + 1) = \ + *((char *)(p) + 1);} +#endif + +#ifndef SK_PNMI_READ_U32 +#define SK_PNMI_READ_U32(p,v) {*((char *)&(v)) = *(char *)(p); \ + *(((char *)&(v)) + 1) = \ + *((char *)(p) + 1); \ + *(((char *)&(v)) + 2) = \ + *((char *)(p) + 2); \ + *(((char *)&(v)) + 3) = \ + *((char *)(p) + 3);} +#endif + +#ifndef SK_PNMI_READ_U64 +#define SK_PNMI_READ_U64(p,v) {*((char *)&(v)) = *(char *)(p); \ + *(((char *)&(v)) + 1) = \ + *((char *)(p) + 1); \ + *(((char *)&(v)) + 2) = \ + *((char *)(p) + 2); \ + *(((char *)&(v)) + 3) = \ + *((char *)(p) + 3); \ + *(((char *)&(v)) + 4) = \ + *((char *)(p) + 4); \ + *(((char *)&(v)) + 5) = \ + *((char *)(p) + 5); \ + *(((char *)&(v)) + 6) = \ + *((char *)(p) + 6); \ + *(((char *)&(v)) + 7) = \ + *((char *)(p) + 7);} +#endif + +/* + * Macros for Debug + */ +#ifdef DEBUG + +#define SK_PNMI_CHECKFLAGS(vSt) {if (pAC->Pnmi.MacUpdatedFlag > 0 || \ + pAC->Pnmi.RlmtUpdatedFlag > 0 || \ + pAC->Pnmi.SirqUpdatedFlag > 0) { \ + SK_DBG_MSG(pAC, \ + SK_DBGMOD_PNMI, \ + SK_DBGCAT_CTRL, \ + ("PNMI: ERR: %s MacUFlag=%d, RlmtUFlag=%d, SirqUFlag=%d\n", \ + vSt, \ + pAC->Pnmi.MacUpdatedFlag, \ + pAC->Pnmi.RlmtUpdatedFlag, \ + pAC->Pnmi.SirqUpdatedFlag))}} + +#else /* !DEBUG */ + +#define SK_PNMI_CHECKFLAGS(vSt) /* Nothing */ + +#endif /* !DEBUG */ + +#endif /* _SKGEPNM2_H_ */ diff --git a/drivers/net/sk98lin/h/skgepnmi.h b/drivers/net/sk98lin/h/skgepnmi.h new file mode 100644 index 00000000000..1ed214ccb25 --- /dev/null +++ b/drivers/net/sk98lin/h/skgepnmi.h @@ -0,0 +1,962 @@ +/***************************************************************************** + * + * Name: skgepnmi.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.62 $ + * Date: $Date: 2003/08/15 12:31:52 $ + * Purpose: Defines for Private Network Management Interface + * + ****************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef _SKGEPNMI_H_ +#define _SKGEPNMI_H_ + +/* + * Include dependencies + */ +#include "h/sktypes.h" +#include "h/skerror.h" +#include "h/sktimer.h" +#include "h/ski2c.h" +#include "h/skaddr.h" +#include "h/skrlmt.h" +#include "h/skvpd.h" + +/* + * Management Database Version + */ +#define SK_PNMI_MDB_VERSION 0x00030001 /* 3.1 */ + + +/* + * Event definitions + */ +#define SK_PNMI_EVT_SIRQ_OVERFLOW 1 /* Counter overflow */ +#define SK_PNMI_EVT_SEN_WAR_LOW 2 /* Lower war thres exceeded */ +#define SK_PNMI_EVT_SEN_WAR_UPP 3 /* Upper war thres exceeded */ +#define SK_PNMI_EVT_SEN_ERR_LOW 4 /* Lower err thres exceeded */ +#define SK_PNMI_EVT_SEN_ERR_UPP 5 /* Upper err thres exceeded */ +#define SK_PNMI_EVT_CHG_EST_TIMER 6 /* Timer event for RLMT Chg */ +#define SK_PNMI_EVT_UTILIZATION_TIMER 7 /* Timer event for Utiliza. */ +#define SK_PNMI_EVT_CLEAR_COUNTER 8 /* Clear statistic counters */ +#define SK_PNMI_EVT_XMAC_RESET 9 /* XMAC will be reset */ + +#define SK_PNMI_EVT_RLMT_PORT_UP 10 /* Port came logically up */ +#define SK_PNMI_EVT_RLMT_PORT_DOWN 11 /* Port went logically down */ +#define SK_PNMI_EVT_RLMT_SEGMENTATION 13 /* Two SP root bridges found */ +#define SK_PNMI_EVT_RLMT_ACTIVE_DOWN 14 /* Port went logically down */ +#define SK_PNMI_EVT_RLMT_ACTIVE_UP 15 /* Port came logically up */ +#define SK_PNMI_EVT_RLMT_SET_NETS 16 /* 1. Parameter is number of nets + 1 = single net; 2 = dual net */ +#define SK_PNMI_EVT_VCT_RESET 17 /* VCT port reset timer event started with SET. */ + + +/* + * Return values + */ +#define SK_PNMI_ERR_OK 0 +#define SK_PNMI_ERR_GENERAL 1 +#define SK_PNMI_ERR_TOO_SHORT 2 +#define SK_PNMI_ERR_BAD_VALUE 3 +#define SK_PNMI_ERR_READ_ONLY 4 +#define SK_PNMI_ERR_UNKNOWN_OID 5 +#define SK_PNMI_ERR_UNKNOWN_INST 6 +#define SK_PNMI_ERR_UNKNOWN_NET 7 +#define SK_PNMI_ERR_NOT_SUPPORTED 10 + + +/* + * Return values of driver reset function SK_DRIVER_RESET() and + * driver event function SK_DRIVER_EVENT() + */ +#define SK_PNMI_ERR_OK 0 +#define SK_PNMI_ERR_FAIL 1 + + +/* + * Return values of driver test function SK_DRIVER_SELFTEST() + */ +#define SK_PNMI_TST_UNKNOWN (1 << 0) +#define SK_PNMI_TST_TRANCEIVER (1 << 1) +#define SK_PNMI_TST_ASIC (1 << 2) +#define SK_PNMI_TST_SENSOR (1 << 3) +#define SK_PNMI_TST_POWERMGMT (1 << 4) +#define SK_PNMI_TST_PCI (1 << 5) +#define SK_PNMI_TST_MAC (1 << 6) + + +/* + * RLMT specific definitions + */ +#define SK_PNMI_RLMT_STATUS_STANDBY 1 +#define SK_PNMI_RLMT_STATUS_ACTIVE 2 +#define SK_PNMI_RLMT_STATUS_ERROR 3 + +#define SK_PNMI_RLMT_LSTAT_PHY_DOWN 1 +#define SK_PNMI_RLMT_LSTAT_AUTONEG 2 +#define SK_PNMI_RLMT_LSTAT_LOG_DOWN 3 +#define SK_PNMI_RLMT_LSTAT_LOG_UP 4 +#define SK_PNMI_RLMT_LSTAT_INDETERMINATED 5 + +#define SK_PNMI_RLMT_MODE_CHK_LINK (SK_RLMT_CHECK_LINK) +#define SK_PNMI_RLMT_MODE_CHK_RX (SK_RLMT_CHECK_LOC_LINK) +#define SK_PNMI_RLMT_MODE_CHK_SPT (SK_RLMT_CHECK_SEG) +/* #define SK_PNMI_RLMT_MODE_CHK_EX */ + +/* + * OID definition + */ +#ifndef _NDIS_ /* Check, whether NDIS already included OIDs */ + +#define OID_GEN_XMIT_OK 0x00020101 +#define OID_GEN_RCV_OK 0x00020102 +#define OID_GEN_XMIT_ERROR 0x00020103 +#define OID_GEN_RCV_ERROR 0x00020104 +#define OID_GEN_RCV_NO_BUFFER 0x00020105 + +/* #define OID_GEN_DIRECTED_BYTES_XMIT 0x00020201 */ +#define OID_GEN_DIRECTED_FRAMES_XMIT 0x00020202 +/* #define OID_GEN_MULTICAST_BYTES_XMIT 0x00020203 */ +#define OID_GEN_MULTICAST_FRAMES_XMIT 0x00020204 +/* #define OID_GEN_BROADCAST_BYTES_XMIT 0x00020205 */ +#define OID_GEN_BROADCAST_FRAMES_XMIT 0x00020206 +/* #define OID_GEN_DIRECTED_BYTES_RCV 0x00020207 */ +#define OID_GEN_DIRECTED_FRAMES_RCV 0x00020208 +/* #define OID_GEN_MULTICAST_BYTES_RCV 0x00020209 */ +#define OID_GEN_MULTICAST_FRAMES_RCV 0x0002020A +/* #define OID_GEN_BROADCAST_BYTES_RCV 0x0002020B */ +#define OID_GEN_BROADCAST_FRAMES_RCV 0x0002020C +#define OID_GEN_RCV_CRC_ERROR 0x0002020D +#define OID_GEN_TRANSMIT_QUEUE_LENGTH 0x0002020E + +#define OID_802_3_PERMANENT_ADDRESS 0x01010101 +#define OID_802_3_CURRENT_ADDRESS 0x01010102 +/* #define OID_802_3_MULTICAST_LIST 0x01010103 */ +/* #define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104 */ +/* #define OID_802_3_MAC_OPTIONS 0x01010105 */ + +#define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101 +#define OID_802_3_XMIT_ONE_COLLISION 0x01020102 +#define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103 +#define OID_802_3_XMIT_DEFERRED 0x01020201 +#define OID_802_3_XMIT_MAX_COLLISIONS 0x01020202 +#define OID_802_3_RCV_OVERRUN 0x01020203 +#define OID_802_3_XMIT_UNDERRUN 0x01020204 +#define OID_802_3_XMIT_TIMES_CRS_LOST 0x01020206 +#define OID_802_3_XMIT_LATE_COLLISIONS 0x01020207 + +/* + * PnP and PM OIDs + */ +#ifdef SK_POWER_MGMT +#define OID_PNP_CAPABILITIES 0xFD010100 +#define OID_PNP_SET_POWER 0xFD010101 +#define OID_PNP_QUERY_POWER 0xFD010102 +#define OID_PNP_ADD_WAKE_UP_PATTERN 0xFD010103 +#define OID_PNP_REMOVE_WAKE_UP_PATTERN 0xFD010104 +#define OID_PNP_ENABLE_WAKE_UP 0xFD010106 +#endif /* SK_POWER_MGMT */ + +#endif /* _NDIS_ */ + +#define OID_SKGE_MDB_VERSION 0xFF010100 +#define OID_SKGE_SUPPORTED_LIST 0xFF010101 +#define OID_SKGE_VPD_FREE_BYTES 0xFF010102 +#define OID_SKGE_VPD_ENTRIES_LIST 0xFF010103 +#define OID_SKGE_VPD_ENTRIES_NUMBER 0xFF010104 +#define OID_SKGE_VPD_KEY 0xFF010105 +#define OID_SKGE_VPD_VALUE 0xFF010106 +#define OID_SKGE_VPD_ACCESS 0xFF010107 +#define OID_SKGE_VPD_ACTION 0xFF010108 + +#define OID_SKGE_PORT_NUMBER 0xFF010110 +#define OID_SKGE_DEVICE_TYPE 0xFF010111 +#define OID_SKGE_DRIVER_DESCR 0xFF010112 +#define OID_SKGE_DRIVER_VERSION 0xFF010113 +#define OID_SKGE_HW_DESCR 0xFF010114 +#define OID_SKGE_HW_VERSION 0xFF010115 +#define OID_SKGE_CHIPSET 0xFF010116 +#define OID_SKGE_ACTION 0xFF010117 +#define OID_SKGE_RESULT 0xFF010118 +#define OID_SKGE_BUS_TYPE 0xFF010119 +#define OID_SKGE_BUS_SPEED 0xFF01011A +#define OID_SKGE_BUS_WIDTH 0xFF01011B +/* 0xFF01011C unused */ +#define OID_SKGE_DIAG_ACTION 0xFF01011D +#define OID_SKGE_DIAG_RESULT 0xFF01011E +#define OID_SKGE_MTU 0xFF01011F +#define OID_SKGE_PHYS_CUR_ADDR 0xFF010120 +#define OID_SKGE_PHYS_FAC_ADDR 0xFF010121 +#define OID_SKGE_PMD 0xFF010122 +#define OID_SKGE_CONNECTOR 0xFF010123 +#define OID_SKGE_LINK_CAP 0xFF010124 +#define OID_SKGE_LINK_MODE 0xFF010125 +#define OID_SKGE_LINK_MODE_STATUS 0xFF010126 +#define OID_SKGE_LINK_STATUS 0xFF010127 +#define OID_SKGE_FLOWCTRL_CAP 0xFF010128 +#define OID_SKGE_FLOWCTRL_MODE 0xFF010129 +#define OID_SKGE_FLOWCTRL_STATUS 0xFF01012A +#define OID_SKGE_PHY_OPERATION_CAP 0xFF01012B +#define OID_SKGE_PHY_OPERATION_MODE 0xFF01012C +#define OID_SKGE_PHY_OPERATION_STATUS 0xFF01012D +#define OID_SKGE_MULTICAST_LIST 0xFF01012E +#define OID_SKGE_CURRENT_PACKET_FILTER 0xFF01012F + +#define OID_SKGE_TRAP 0xFF010130 +#define OID_SKGE_TRAP_NUMBER 0xFF010131 + +#define OID_SKGE_RLMT_MODE 0xFF010140 +#define OID_SKGE_RLMT_PORT_NUMBER 0xFF010141 +#define OID_SKGE_RLMT_PORT_ACTIVE 0xFF010142 +#define OID_SKGE_RLMT_PORT_PREFERRED 0xFF010143 +#define OID_SKGE_INTERMEDIATE_SUPPORT 0xFF010160 + +#define OID_SKGE_SPEED_CAP 0xFF010170 +#define OID_SKGE_SPEED_MODE 0xFF010171 +#define OID_SKGE_SPEED_STATUS 0xFF010172 + +#define OID_SKGE_BOARDLEVEL 0xFF010180 + +#define OID_SKGE_SENSOR_NUMBER 0xFF020100 +#define OID_SKGE_SENSOR_INDEX 0xFF020101 +#define OID_SKGE_SENSOR_DESCR 0xFF020102 +#define OID_SKGE_SENSOR_TYPE 0xFF020103 +#define OID_SKGE_SENSOR_VALUE 0xFF020104 +#define OID_SKGE_SENSOR_WAR_THRES_LOW 0xFF020105 +#define OID_SKGE_SENSOR_WAR_THRES_UPP 0xFF020106 +#define OID_SKGE_SENSOR_ERR_THRES_LOW 0xFF020107 +#define OID_SKGE_SENSOR_ERR_THRES_UPP 0xFF020108 +#define OID_SKGE_SENSOR_STATUS 0xFF020109 +#define OID_SKGE_SENSOR_WAR_CTS 0xFF02010A +#define OID_SKGE_SENSOR_ERR_CTS 0xFF02010B +#define OID_SKGE_SENSOR_WAR_TIME 0xFF02010C +#define OID_SKGE_SENSOR_ERR_TIME 0xFF02010D + +#define OID_SKGE_CHKSM_NUMBER 0xFF020110 +#define OID_SKGE_CHKSM_RX_OK_CTS 0xFF020111 +#define OID_SKGE_CHKSM_RX_UNABLE_CTS 0xFF020112 +#define OID_SKGE_CHKSM_RX_ERR_CTS 0xFF020113 +#define OID_SKGE_CHKSM_TX_OK_CTS 0xFF020114 +#define OID_SKGE_CHKSM_TX_UNABLE_CTS 0xFF020115 + +#define OID_SKGE_STAT_TX 0xFF020120 +#define OID_SKGE_STAT_TX_OCTETS 0xFF020121 +#define OID_SKGE_STAT_TX_BROADCAST 0xFF020122 +#define OID_SKGE_STAT_TX_MULTICAST 0xFF020123 +#define OID_SKGE_STAT_TX_UNICAST 0xFF020124 +#define OID_SKGE_STAT_TX_LONGFRAMES 0xFF020125 +#define OID_SKGE_STAT_TX_BURST 0xFF020126 +#define OID_SKGE_STAT_TX_PFLOWC 0xFF020127 +#define OID_SKGE_STAT_TX_FLOWC 0xFF020128 +#define OID_SKGE_STAT_TX_SINGLE_COL 0xFF020129 +#define OID_SKGE_STAT_TX_MULTI_COL 0xFF02012A +#define OID_SKGE_STAT_TX_EXCESS_COL 0xFF02012B +#define OID_SKGE_STAT_TX_LATE_COL 0xFF02012C +#define OID_SKGE_STAT_TX_DEFFERAL 0xFF02012D +#define OID_SKGE_STAT_TX_EXCESS_DEF 0xFF02012E +#define OID_SKGE_STAT_TX_UNDERRUN 0xFF02012F +#define OID_SKGE_STAT_TX_CARRIER 0xFF020130 +/* #define OID_SKGE_STAT_TX_UTIL 0xFF020131 */ +#define OID_SKGE_STAT_TX_64 0xFF020132 +#define OID_SKGE_STAT_TX_127 0xFF020133 +#define OID_SKGE_STAT_TX_255 0xFF020134 +#define OID_SKGE_STAT_TX_511 0xFF020135 +#define OID_SKGE_STAT_TX_1023 0xFF020136 +#define OID_SKGE_STAT_TX_MAX 0xFF020137 +#define OID_SKGE_STAT_TX_SYNC 0xFF020138 +#define OID_SKGE_STAT_TX_SYNC_OCTETS 0xFF020139 +#define OID_SKGE_STAT_RX 0xFF02013A +#define OID_SKGE_STAT_RX_OCTETS 0xFF02013B +#define OID_SKGE_STAT_RX_BROADCAST 0xFF02013C +#define OID_SKGE_STAT_RX_MULTICAST 0xFF02013D +#define OID_SKGE_STAT_RX_UNICAST 0xFF02013E +#define OID_SKGE_STAT_RX_PFLOWC 0xFF02013F +#define OID_SKGE_STAT_RX_FLOWC 0xFF020140 +#define OID_SKGE_STAT_RX_PFLOWC_ERR 0xFF020141 +#define OID_SKGE_STAT_RX_FLOWC_UNKWN 0xFF020142 +#define OID_SKGE_STAT_RX_BURST 0xFF020143 +#define OID_SKGE_STAT_RX_MISSED 0xFF020144 +#define OID_SKGE_STAT_RX_FRAMING 0xFF020145 +#define OID_SKGE_STAT_RX_OVERFLOW 0xFF020146 +#define OID_SKGE_STAT_RX_JABBER 0xFF020147 +#define OID_SKGE_STAT_RX_CARRIER 0xFF020148 +#define OID_SKGE_STAT_RX_IR_LENGTH 0xFF020149 +#define OID_SKGE_STAT_RX_SYMBOL 0xFF02014A +#define OID_SKGE_STAT_RX_SHORTS 0xFF02014B +#define OID_SKGE_STAT_RX_RUNT 0xFF02014C +#define OID_SKGE_STAT_RX_CEXT 0xFF02014D +#define OID_SKGE_STAT_RX_TOO_LONG 0xFF02014E +#define OID_SKGE_STAT_RX_FCS 0xFF02014F +/* #define OID_SKGE_STAT_RX_UTIL 0xFF020150 */ +#define OID_SKGE_STAT_RX_64 0xFF020151 +#define OID_SKGE_STAT_RX_127 0xFF020152 +#define OID_SKGE_STAT_RX_255 0xFF020153 +#define OID_SKGE_STAT_RX_511 0xFF020154 +#define OID_SKGE_STAT_RX_1023 0xFF020155 +#define OID_SKGE_STAT_RX_MAX 0xFF020156 +#define OID_SKGE_STAT_RX_LONGFRAMES 0xFF020157 + +#define OID_SKGE_RLMT_CHANGE_CTS 0xFF020160 +#define OID_SKGE_RLMT_CHANGE_TIME 0xFF020161 +#define OID_SKGE_RLMT_CHANGE_ESTIM 0xFF020162 +#define OID_SKGE_RLMT_CHANGE_THRES 0xFF020163 + +#define OID_SKGE_RLMT_PORT_INDEX 0xFF020164 +#define OID_SKGE_RLMT_STATUS 0xFF020165 +#define OID_SKGE_RLMT_TX_HELLO_CTS 0xFF020166 +#define OID_SKGE_RLMT_RX_HELLO_CTS 0xFF020167 +#define OID_SKGE_RLMT_TX_SP_REQ_CTS 0xFF020168 +#define OID_SKGE_RLMT_RX_SP_CTS 0xFF020169 + +#define OID_SKGE_RLMT_MONITOR_NUMBER 0xFF010150 +#define OID_SKGE_RLMT_MONITOR_INDEX 0xFF010151 +#define OID_SKGE_RLMT_MONITOR_ADDR 0xFF010152 +#define OID_SKGE_RLMT_MONITOR_ERRS 0xFF010153 +#define OID_SKGE_RLMT_MONITOR_TIMESTAMP 0xFF010154 +#define OID_SKGE_RLMT_MONITOR_ADMIN 0xFF010155 + +#define OID_SKGE_TX_SW_QUEUE_LEN 0xFF020170 +#define OID_SKGE_TX_SW_QUEUE_MAX 0xFF020171 +#define OID_SKGE_TX_RETRY 0xFF020172 +#define OID_SKGE_RX_INTR_CTS 0xFF020173 +#define OID_SKGE_TX_INTR_CTS 0xFF020174 +#define OID_SKGE_RX_NO_BUF_CTS 0xFF020175 +#define OID_SKGE_TX_NO_BUF_CTS 0xFF020176 +#define OID_SKGE_TX_USED_DESCR_NO 0xFF020177 +#define OID_SKGE_RX_DELIVERED_CTS 0xFF020178 +#define OID_SKGE_RX_OCTETS_DELIV_CTS 0xFF020179 +#define OID_SKGE_RX_HW_ERROR_CTS 0xFF02017A +#define OID_SKGE_TX_HW_ERROR_CTS 0xFF02017B +#define OID_SKGE_IN_ERRORS_CTS 0xFF02017C +#define OID_SKGE_OUT_ERROR_CTS 0xFF02017D +#define OID_SKGE_ERR_RECOVERY_CTS 0xFF02017E +#define OID_SKGE_SYSUPTIME 0xFF02017F + +#define OID_SKGE_ALL_DATA 0xFF020190 + +/* Defines for VCT. */ +#define OID_SKGE_VCT_GET 0xFF020200 +#define OID_SKGE_VCT_SET 0xFF020201 +#define OID_SKGE_VCT_STATUS 0xFF020202 + +#ifdef SK_DIAG_SUPPORT +/* Defines for driver DIAG mode. */ +#define OID_SKGE_DIAG_MODE 0xFF020204 +#endif /* SK_DIAG_SUPPORT */ + +/* New OIDs */ +#define OID_SKGE_DRIVER_RELDATE 0xFF020210 +#define OID_SKGE_DRIVER_FILENAME 0xFF020211 +#define OID_SKGE_CHIPID 0xFF020212 +#define OID_SKGE_RAMSIZE 0xFF020213 +#define OID_SKGE_VAUXAVAIL 0xFF020214 +#define OID_SKGE_PHY_TYPE 0xFF020215 +#define OID_SKGE_PHY_LP_MODE 0xFF020216 + +/* VCT struct to store a backup copy of VCT data after a port reset. */ +typedef struct s_PnmiVct { + SK_U8 VctStatus; + SK_U8 PCableLen; + SK_U32 PMdiPairLen[4]; + SK_U8 PMdiPairSts[4]; +} SK_PNMI_VCT; + + +/* VCT status values (to be given to CPA via OID_SKGE_VCT_STATUS). */ +#define SK_PNMI_VCT_NONE 0 +#define SK_PNMI_VCT_OLD_VCT_DATA 1 +#define SK_PNMI_VCT_NEW_VCT_DATA 2 +#define SK_PNMI_VCT_OLD_DSP_DATA 4 +#define SK_PNMI_VCT_NEW_DSP_DATA 8 +#define SK_PNMI_VCT_RUNNING 16 + + +/* VCT cable test status. */ +#define SK_PNMI_VCT_NORMAL_CABLE 0 +#define SK_PNMI_VCT_SHORT_CABLE 1 +#define SK_PNMI_VCT_OPEN_CABLE 2 +#define SK_PNMI_VCT_TEST_FAIL 3 +#define SK_PNMI_VCT_IMPEDANCE_MISMATCH 4 + +#define OID_SKGE_TRAP_SEN_WAR_LOW 500 +#define OID_SKGE_TRAP_SEN_WAR_UPP 501 +#define OID_SKGE_TRAP_SEN_ERR_LOW 502 +#define OID_SKGE_TRAP_SEN_ERR_UPP 503 +#define OID_SKGE_TRAP_RLMT_CHANGE_THRES 520 +#define OID_SKGE_TRAP_RLMT_CHANGE_PORT 521 +#define OID_SKGE_TRAP_RLMT_PORT_DOWN 522 +#define OID_SKGE_TRAP_RLMT_PORT_UP 523 +#define OID_SKGE_TRAP_RLMT_SEGMENTATION 524 + +#ifdef SK_DIAG_SUPPORT +/* Defines for driver DIAG mode. */ +#define SK_DIAG_ATTACHED 2 +#define SK_DIAG_RUNNING 1 +#define SK_DIAG_IDLE 0 +#endif /* SK_DIAG_SUPPORT */ + +/* + * Generic PNMI IOCTL subcommand definitions. + */ +#define SK_GET_SINGLE_VAR 1 +#define SK_SET_SINGLE_VAR 2 +#define SK_PRESET_SINGLE_VAR 3 +#define SK_GET_FULL_MIB 4 +#define SK_SET_FULL_MIB 5 +#define SK_PRESET_FULL_MIB 6 + + +/* + * Define error numbers and messages for syslog + */ +#define SK_PNMI_ERR001 (SK_ERRBASE_PNMI + 1) +#define SK_PNMI_ERR001MSG "SkPnmiGetStruct: Unknown OID" +#define SK_PNMI_ERR002 (SK_ERRBASE_PNMI + 2) +#define SK_PNMI_ERR002MSG "SkPnmiGetStruct: Cannot read VPD keys" +#define SK_PNMI_ERR003 (SK_ERRBASE_PNMI + 3) +#define SK_PNMI_ERR003MSG "OidStruct: Called with wrong OID" +#define SK_PNMI_ERR004 (SK_ERRBASE_PNMI + 4) +#define SK_PNMI_ERR004MSG "OidStruct: Called with wrong action" +#define SK_PNMI_ERR005 (SK_ERRBASE_PNMI + 5) +#define SK_PNMI_ERR005MSG "Perform: Cannot reset driver" +#define SK_PNMI_ERR006 (SK_ERRBASE_PNMI + 6) +#define SK_PNMI_ERR006MSG "Perform: Unknown OID action command" +#define SK_PNMI_ERR007 (SK_ERRBASE_PNMI + 7) +#define SK_PNMI_ERR007MSG "General: Driver description not initialized" +#define SK_PNMI_ERR008 (SK_ERRBASE_PNMI + 8) +#define SK_PNMI_ERR008MSG "Addr: Tried to get unknown OID" +#define SK_PNMI_ERR009 (SK_ERRBASE_PNMI + 9) +#define SK_PNMI_ERR009MSG "Addr: Unknown OID" +#define SK_PNMI_ERR010 (SK_ERRBASE_PNMI + 10) +#define SK_PNMI_ERR010MSG "CsumStat: Unknown OID" +#define SK_PNMI_ERR011 (SK_ERRBASE_PNMI + 11) +#define SK_PNMI_ERR011MSG "SensorStat: Sensor descr string too long" +#define SK_PNMI_ERR012 (SK_ERRBASE_PNMI + 12) +#define SK_PNMI_ERR012MSG "SensorStat: Unknown OID" +#define SK_PNMI_ERR013 (SK_ERRBASE_PNMI + 13) +#define SK_PNMI_ERR013MSG "" +#define SK_PNMI_ERR014 (SK_ERRBASE_PNMI + 14) +#define SK_PNMI_ERR014MSG "Vpd: Cannot read VPD keys" +#define SK_PNMI_ERR015 (SK_ERRBASE_PNMI + 15) +#define SK_PNMI_ERR015MSG "Vpd: Internal array for VPD keys to small" +#define SK_PNMI_ERR016 (SK_ERRBASE_PNMI + 16) +#define SK_PNMI_ERR016MSG "Vpd: Key string too long" +#define SK_PNMI_ERR017 (SK_ERRBASE_PNMI + 17) +#define SK_PNMI_ERR017MSG "Vpd: Invalid VPD status pointer" +#define SK_PNMI_ERR018 (SK_ERRBASE_PNMI + 18) +#define SK_PNMI_ERR018MSG "Vpd: VPD data not valid" +#define SK_PNMI_ERR019 (SK_ERRBASE_PNMI + 19) +#define SK_PNMI_ERR019MSG "Vpd: VPD entries list string too long" +#define SK_PNMI_ERR021 (SK_ERRBASE_PNMI + 21) +#define SK_PNMI_ERR021MSG "Vpd: VPD data string too long" +#define SK_PNMI_ERR022 (SK_ERRBASE_PNMI + 22) +#define SK_PNMI_ERR022MSG "Vpd: VPD data string too long should be errored before" +#define SK_PNMI_ERR023 (SK_ERRBASE_PNMI + 23) +#define SK_PNMI_ERR023MSG "Vpd: Unknown OID in get action" +#define SK_PNMI_ERR024 (SK_ERRBASE_PNMI + 24) +#define SK_PNMI_ERR024MSG "Vpd: Unknown OID in preset/set action" +#define SK_PNMI_ERR025 (SK_ERRBASE_PNMI + 25) +#define SK_PNMI_ERR025MSG "Vpd: Cannot write VPD after modify entry" +#define SK_PNMI_ERR026 (SK_ERRBASE_PNMI + 26) +#define SK_PNMI_ERR026MSG "Vpd: Cannot update VPD" +#define SK_PNMI_ERR027 (SK_ERRBASE_PNMI + 27) +#define SK_PNMI_ERR027MSG "Vpd: Cannot delete VPD entry" +#define SK_PNMI_ERR028 (SK_ERRBASE_PNMI + 28) +#define SK_PNMI_ERR028MSG "Vpd: Cannot update VPD after delete entry" +#define SK_PNMI_ERR029 (SK_ERRBASE_PNMI + 29) +#define SK_PNMI_ERR029MSG "General: Driver description string too long" +#define SK_PNMI_ERR030 (SK_ERRBASE_PNMI + 30) +#define SK_PNMI_ERR030MSG "General: Driver version not initialized" +#define SK_PNMI_ERR031 (SK_ERRBASE_PNMI + 31) +#define SK_PNMI_ERR031MSG "General: Driver version string too long" +#define SK_PNMI_ERR032 (SK_ERRBASE_PNMI + 32) +#define SK_PNMI_ERR032MSG "General: Cannot read VPD Name for HW descr" +#define SK_PNMI_ERR033 (SK_ERRBASE_PNMI + 33) +#define SK_PNMI_ERR033MSG "General: HW description string too long" +#define SK_PNMI_ERR034 (SK_ERRBASE_PNMI + 34) +#define SK_PNMI_ERR034MSG "General: Unknown OID" +#define SK_PNMI_ERR035 (SK_ERRBASE_PNMI + 35) +#define SK_PNMI_ERR035MSG "Rlmt: Unknown OID" +#define SK_PNMI_ERR036 (SK_ERRBASE_PNMI + 36) +#define SK_PNMI_ERR036MSG "" +#define SK_PNMI_ERR037 (SK_ERRBASE_PNMI + 37) +#define SK_PNMI_ERR037MSG "Rlmt: SK_RLMT_MODE_CHANGE event return not 0" +#define SK_PNMI_ERR038 (SK_ERRBASE_PNMI + 38) +#define SK_PNMI_ERR038MSG "Rlmt: SK_RLMT_PREFPORT_CHANGE event return not 0" +#define SK_PNMI_ERR039 (SK_ERRBASE_PNMI + 39) +#define SK_PNMI_ERR039MSG "RlmtStat: Unknown OID" +#define SK_PNMI_ERR040 (SK_ERRBASE_PNMI + 40) +#define SK_PNMI_ERR040MSG "PowerManagement: Unknown OID" +#define SK_PNMI_ERR041 (SK_ERRBASE_PNMI + 41) +#define SK_PNMI_ERR041MSG "MacPrivateConf: Unknown OID" +#define SK_PNMI_ERR042 (SK_ERRBASE_PNMI + 42) +#define SK_PNMI_ERR042MSG "MacPrivateConf: SK_HWEV_SET_ROLE returned not 0" +#define SK_PNMI_ERR043 (SK_ERRBASE_PNMI + 43) +#define SK_PNMI_ERR043MSG "MacPrivateConf: SK_HWEV_SET_LMODE returned not 0" +#define SK_PNMI_ERR044 (SK_ERRBASE_PNMI + 44) +#define SK_PNMI_ERR044MSG "MacPrivateConf: SK_HWEV_SET_FLOWMODE returned not 0" +#define SK_PNMI_ERR045 (SK_ERRBASE_PNMI + 45) +#define SK_PNMI_ERR045MSG "MacPrivateConf: SK_HWEV_SET_SPEED returned not 0" +#define SK_PNMI_ERR046 (SK_ERRBASE_PNMI + 46) +#define SK_PNMI_ERR046MSG "Monitor: Unknown OID" +#define SK_PNMI_ERR047 (SK_ERRBASE_PNMI + 47) +#define SK_PNMI_ERR047MSG "SirqUpdate: Event function returns not 0" +#define SK_PNMI_ERR048 (SK_ERRBASE_PNMI + 48) +#define SK_PNMI_ERR048MSG "RlmtUpdate: Event function returns not 0" +#define SK_PNMI_ERR049 (SK_ERRBASE_PNMI + 49) +#define SK_PNMI_ERR049MSG "SkPnmiInit: Invalid size of 'CounterOffset' struct!!" +#define SK_PNMI_ERR050 (SK_ERRBASE_PNMI + 50) +#define SK_PNMI_ERR050MSG "SkPnmiInit: Invalid size of 'StatAddr' table!!" +#define SK_PNMI_ERR051 (SK_ERRBASE_PNMI + 51) +#define SK_PNMI_ERR051MSG "SkPnmiEvent: Port switch suspicious" +#define SK_PNMI_ERR052 (SK_ERRBASE_PNMI + 52) +#define SK_PNMI_ERR052MSG "" +#define SK_PNMI_ERR053 (SK_ERRBASE_PNMI + 53) +#define SK_PNMI_ERR053MSG "General: Driver release date not initialized" +#define SK_PNMI_ERR054 (SK_ERRBASE_PNMI + 54) +#define SK_PNMI_ERR054MSG "General: Driver release date string too long" +#define SK_PNMI_ERR055 (SK_ERRBASE_PNMI + 55) +#define SK_PNMI_ERR055MSG "General: Driver file name not initialized" +#define SK_PNMI_ERR056 (SK_ERRBASE_PNMI + 56) +#define SK_PNMI_ERR056MSG "General: Driver file name string too long" + +/* + * Management counter macros called by the driver + */ +#define SK_PNMI_SET_DRIVER_DESCR(pAC,v) ((pAC)->Pnmi.pDriverDescription = \ + (char *)(v)) + +#define SK_PNMI_SET_DRIVER_VER(pAC,v) ((pAC)->Pnmi.pDriverVersion = \ + (char *)(v)) + +#define SK_PNMI_SET_DRIVER_RELDATE(pAC,v) ((pAC)->Pnmi.pDriverReleaseDate = \ + (char *)(v)) + +#define SK_PNMI_SET_DRIVER_FILENAME(pAC,v) ((pAC)->Pnmi.pDriverFileName = \ + (char *)(v)) + +#define SK_PNMI_CNT_TX_QUEUE_LEN(pAC,v,p) \ + { \ + (pAC)->Pnmi.Port[p].TxSwQueueLen = (SK_U64)(v); \ + if ((pAC)->Pnmi.Port[p].TxSwQueueLen > (pAC)->Pnmi.Port[p].TxSwQueueMax) { \ + (pAC)->Pnmi.Port[p].TxSwQueueMax = (pAC)->Pnmi.Port[p].TxSwQueueLen; \ + } \ + } +#define SK_PNMI_CNT_TX_RETRY(pAC,p) (((pAC)->Pnmi.Port[p].TxRetryCts)++) +#define SK_PNMI_CNT_RX_INTR(pAC,p) (((pAC)->Pnmi.Port[p].RxIntrCts)++) +#define SK_PNMI_CNT_TX_INTR(pAC,p) (((pAC)->Pnmi.Port[p].TxIntrCts)++) +#define SK_PNMI_CNT_NO_RX_BUF(pAC,p) (((pAC)->Pnmi.Port[p].RxNoBufCts)++) +#define SK_PNMI_CNT_NO_TX_BUF(pAC,p) (((pAC)->Pnmi.Port[p].TxNoBufCts)++) +#define SK_PNMI_CNT_USED_TX_DESCR(pAC,v,p) \ + ((pAC)->Pnmi.Port[p].TxUsedDescrNo=(SK_U64)(v)); +#define SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC,v,p) \ + { \ + ((pAC)->Pnmi.Port[p].RxDeliveredCts)++; \ + (pAC)->Pnmi.Port[p].RxOctetsDeliveredCts += (SK_U64)(v); \ + } +#define SK_PNMI_CNT_ERR_RECOVERY(pAC,p) (((pAC)->Pnmi.Port[p].ErrRecoveryCts)++); + +#define SK_PNMI_CNT_SYNC_OCTETS(pAC,p,v) \ + { \ + if ((p) < SK_MAX_MACS) { \ + ((pAC)->Pnmi.Port[p].StatSyncCts)++; \ + (pAC)->Pnmi.Port[p].StatSyncOctetsCts += (SK_U64)(v); \ + } \ + } + +#define SK_PNMI_CNT_RX_LONGFRAMES(pAC,p) \ + { \ + if ((p) < SK_MAX_MACS) { \ + ((pAC)->Pnmi.Port[p].StatRxLongFrameCts++); \ + } \ + } + +#define SK_PNMI_CNT_RX_FRAMETOOLONG(pAC,p) \ + { \ + if ((p) < SK_MAX_MACS) { \ + ((pAC)->Pnmi.Port[p].StatRxFrameTooLongCts++); \ + } \ + } + +#define SK_PNMI_CNT_RX_PMACC_ERR(pAC,p) \ + { \ + if ((p) < SK_MAX_MACS) { \ + ((pAC)->Pnmi.Port[p].StatRxPMaccErr++); \ + } \ + } + +/* + * Conversion Macros + */ +#define SK_PNMI_PORT_INST2LOG(i) ((unsigned int)(i) - 1) +#define SK_PNMI_PORT_LOG2INST(l) ((unsigned int)(l) + 1) +#define SK_PNMI_PORT_PHYS2LOG(p) ((unsigned int)(p) + 1) +#define SK_PNMI_PORT_LOG2PHYS(pAC,l) ((unsigned int)(l) - 1) +#define SK_PNMI_PORT_PHYS2INST(pAC,p) \ + (pAC->Pnmi.DualNetActiveFlag ? 2 : ((unsigned int)(p) + 2)) +#define SK_PNMI_PORT_INST2PHYS(pAC,i) ((unsigned int)(i) - 2) + +/* + * Structure definition for SkPnmiGetStruct and SkPnmiSetStruct + */ +#define SK_PNMI_VPD_KEY_SIZE 5 +#define SK_PNMI_VPD_BUFSIZE (VPD_SIZE) +#define SK_PNMI_VPD_ENTRIES (VPD_SIZE / 4) +#define SK_PNMI_VPD_DATALEN 128 /* Number of data bytes */ + +#define SK_PNMI_MULTICAST_LISTLEN 64 +#define SK_PNMI_SENSOR_ENTRIES (SK_MAX_SENSORS) +#define SK_PNMI_CHECKSUM_ENTRIES 3 +#define SK_PNMI_MAC_ENTRIES (SK_MAX_MACS + 1) +#define SK_PNMI_MONITOR_ENTRIES 20 +#define SK_PNMI_TRAP_ENTRIES 10 +#define SK_PNMI_TRAPLEN 128 +#define SK_PNMI_STRINGLEN1 80 +#define SK_PNMI_STRINGLEN2 25 +#define SK_PNMI_TRAP_QUEUE_LEN 512 + +typedef struct s_PnmiVpd { + char VpdKey[SK_PNMI_VPD_KEY_SIZE]; + char VpdValue[SK_PNMI_VPD_DATALEN]; + SK_U8 VpdAccess; + SK_U8 VpdAction; +} SK_PNMI_VPD; + +typedef struct s_PnmiSensor { + SK_U8 SensorIndex; + char SensorDescr[SK_PNMI_STRINGLEN2]; + SK_U8 SensorType; + SK_U32 SensorValue; + SK_U32 SensorWarningThresholdLow; + SK_U32 SensorWarningThresholdHigh; + SK_U32 SensorErrorThresholdLow; + SK_U32 SensorErrorThresholdHigh; + SK_U8 SensorStatus; + SK_U64 SensorWarningCts; + SK_U64 SensorErrorCts; + SK_U64 SensorWarningTimestamp; + SK_U64 SensorErrorTimestamp; +} SK_PNMI_SENSOR; + +typedef struct s_PnmiChecksum { + SK_U64 ChecksumRxOkCts; + SK_U64 ChecksumRxUnableCts; + SK_U64 ChecksumRxErrCts; + SK_U64 ChecksumTxOkCts; + SK_U64 ChecksumTxUnableCts; +} SK_PNMI_CHECKSUM; + +typedef struct s_PnmiStat { + SK_U64 StatTxOkCts; + SK_U64 StatTxOctetsOkCts; + SK_U64 StatTxBroadcastOkCts; + SK_U64 StatTxMulticastOkCts; + SK_U64 StatTxUnicastOkCts; + SK_U64 StatTxLongFramesCts; + SK_U64 StatTxBurstCts; + SK_U64 StatTxPauseMacCtrlCts; + SK_U64 StatTxMacCtrlCts; + SK_U64 StatTxSingleCollisionCts; + SK_U64 StatTxMultipleCollisionCts; + SK_U64 StatTxExcessiveCollisionCts; + SK_U64 StatTxLateCollisionCts; + SK_U64 StatTxDeferralCts; + SK_U64 StatTxExcessiveDeferralCts; + SK_U64 StatTxFifoUnderrunCts; + SK_U64 StatTxCarrierCts; + SK_U64 Dummy1; /* StatTxUtilization */ + SK_U64 StatTx64Cts; + SK_U64 StatTx127Cts; + SK_U64 StatTx255Cts; + SK_U64 StatTx511Cts; + SK_U64 StatTx1023Cts; + SK_U64 StatTxMaxCts; + SK_U64 StatTxSyncCts; + SK_U64 StatTxSyncOctetsCts; + SK_U64 StatRxOkCts; + SK_U64 StatRxOctetsOkCts; + SK_U64 StatRxBroadcastOkCts; + SK_U64 StatRxMulticastOkCts; + SK_U64 StatRxUnicastOkCts; + SK_U64 StatRxLongFramesCts; + SK_U64 StatRxPauseMacCtrlCts; + SK_U64 StatRxMacCtrlCts; + SK_U64 StatRxPauseMacCtrlErrorCts; + SK_U64 StatRxMacCtrlUnknownCts; + SK_U64 StatRxBurstCts; + SK_U64 StatRxMissedCts; + SK_U64 StatRxFramingCts; + SK_U64 StatRxFifoOverflowCts; + SK_U64 StatRxJabberCts; + SK_U64 StatRxCarrierCts; + SK_U64 StatRxIRLengthCts; + SK_U64 StatRxSymbolCts; + SK_U64 StatRxShortsCts; + SK_U64 StatRxRuntCts; + SK_U64 StatRxCextCts; + SK_U64 StatRxTooLongCts; + SK_U64 StatRxFcsCts; + SK_U64 Dummy2; /* StatRxUtilization */ + SK_U64 StatRx64Cts; + SK_U64 StatRx127Cts; + SK_U64 StatRx255Cts; + SK_U64 StatRx511Cts; + SK_U64 StatRx1023Cts; + SK_U64 StatRxMaxCts; +} SK_PNMI_STAT; + +typedef struct s_PnmiConf { + char ConfMacCurrentAddr[6]; + char ConfMacFactoryAddr[6]; + SK_U8 ConfPMD; + SK_U8 ConfConnector; + SK_U32 ConfPhyType; + SK_U32 ConfPhyMode; + SK_U8 ConfLinkCapability; + SK_U8 ConfLinkMode; + SK_U8 ConfLinkModeStatus; + SK_U8 ConfLinkStatus; + SK_U8 ConfFlowCtrlCapability; + SK_U8 ConfFlowCtrlMode; + SK_U8 ConfFlowCtrlStatus; + SK_U8 ConfPhyOperationCapability; + SK_U8 ConfPhyOperationMode; + SK_U8 ConfPhyOperationStatus; + SK_U8 ConfSpeedCapability; + SK_U8 ConfSpeedMode; + SK_U8 ConfSpeedStatus; +} SK_PNMI_CONF; + +typedef struct s_PnmiRlmt { + SK_U32 RlmtIndex; + SK_U32 RlmtStatus; + SK_U64 RlmtTxHelloCts; + SK_U64 RlmtRxHelloCts; + SK_U64 RlmtTxSpHelloReqCts; + SK_U64 RlmtRxSpHelloCts; +} SK_PNMI_RLMT; + +typedef struct s_PnmiRlmtMonitor { + SK_U32 RlmtMonitorIndex; + char RlmtMonitorAddr[6]; + SK_U64 RlmtMonitorErrorCts; + SK_U64 RlmtMonitorTimestamp; + SK_U8 RlmtMonitorAdmin; +} SK_PNMI_RLMT_MONITOR; + +typedef struct s_PnmiRequestStatus { + SK_U32 ErrorStatus; + SK_U32 ErrorOffset; +} SK_PNMI_REQUEST_STATUS; + +typedef struct s_PnmiStrucData { + SK_U32 MgmtDBVersion; + SK_PNMI_REQUEST_STATUS ReturnStatus; + SK_U32 VpdFreeBytes; + char VpdEntriesList[SK_PNMI_VPD_ENTRIES * SK_PNMI_VPD_KEY_SIZE]; + SK_U32 VpdEntriesNumber; + SK_PNMI_VPD Vpd[SK_PNMI_VPD_ENTRIES]; + SK_U32 PortNumber; + SK_U32 DeviceType; + char DriverDescr[SK_PNMI_STRINGLEN1]; + char DriverVersion[SK_PNMI_STRINGLEN2]; + char DriverReleaseDate[SK_PNMI_STRINGLEN1]; + char DriverFileName[SK_PNMI_STRINGLEN1]; + char HwDescr[SK_PNMI_STRINGLEN1]; + char HwVersion[SK_PNMI_STRINGLEN2]; + SK_U16 Chipset; + SK_U32 ChipId; + SK_U8 VauxAvail; + SK_U32 RamSize; + SK_U32 MtuSize; + SK_U32 Action; + SK_U32 TestResult; + SK_U8 BusType; + SK_U8 BusSpeed; + SK_U8 BusWidth; + SK_U8 SensorNumber; + SK_PNMI_SENSOR Sensor[SK_PNMI_SENSOR_ENTRIES]; + SK_U8 ChecksumNumber; + SK_PNMI_CHECKSUM Checksum[SK_PNMI_CHECKSUM_ENTRIES]; + SK_PNMI_STAT Stat[SK_PNMI_MAC_ENTRIES]; + SK_PNMI_CONF Conf[SK_PNMI_MAC_ENTRIES]; + SK_U8 RlmtMode; + SK_U32 RlmtPortNumber; + SK_U8 RlmtPortActive; + SK_U8 RlmtPortPreferred; + SK_U64 RlmtChangeCts; + SK_U64 RlmtChangeTime; + SK_U64 RlmtChangeEstimate; + SK_U64 RlmtChangeThreshold; + SK_PNMI_RLMT Rlmt[SK_MAX_MACS]; + SK_U32 RlmtMonitorNumber; + SK_PNMI_RLMT_MONITOR RlmtMonitor[SK_PNMI_MONITOR_ENTRIES]; + SK_U32 TrapNumber; + SK_U8 Trap[SK_PNMI_TRAP_QUEUE_LEN]; + SK_U64 TxSwQueueLen; + SK_U64 TxSwQueueMax; + SK_U64 TxRetryCts; + SK_U64 RxIntrCts; + SK_U64 TxIntrCts; + SK_U64 RxNoBufCts; + SK_U64 TxNoBufCts; + SK_U64 TxUsedDescrNo; + SK_U64 RxDeliveredCts; + SK_U64 RxOctetsDeliveredCts; + SK_U64 RxHwErrorsCts; + SK_U64 TxHwErrorsCts; + SK_U64 InErrorsCts; + SK_U64 OutErrorsCts; + SK_U64 ErrRecoveryCts; + SK_U64 SysUpTime; +} SK_PNMI_STRUCT_DATA; + +#define SK_PNMI_STRUCT_SIZE (sizeof(SK_PNMI_STRUCT_DATA)) +#define SK_PNMI_MIN_STRUCT_SIZE ((unsigned int)(SK_UPTR)\ + &(((SK_PNMI_STRUCT_DATA *)0)->VpdFreeBytes)) + /* + * ReturnStatus field + * must be located + * before VpdFreeBytes + */ + +/* + * Various definitions + */ +#define SK_PNMI_MAX_PROTOS 3 + +#define SK_PNMI_CNT_NO 66 /* Must have the value of the enum + * SK_PNMI_MAX_IDX. Define SK_PNMI_CHECK + * for check while init phase 1 + */ + +/* + * Estimate data structure + */ +typedef struct s_PnmiEstimate { + unsigned int EstValueIndex; + SK_U64 EstValue[7]; + SK_U64 Estimate; + SK_TIMER EstTimer; +} SK_PNMI_ESTIMATE; + + +/* + * VCT timer data structure + */ +typedef struct s_VctTimer { + SK_TIMER VctTimer; +} SK_PNMI_VCT_TIMER; + + +/* + * PNMI specific adapter context structure + */ +typedef struct s_PnmiPort { + SK_U64 StatSyncCts; + SK_U64 StatSyncOctetsCts; + SK_U64 StatRxLongFrameCts; + SK_U64 StatRxFrameTooLongCts; + SK_U64 StatRxPMaccErr; + SK_U64 TxSwQueueLen; + SK_U64 TxSwQueueMax; + SK_U64 TxRetryCts; + SK_U64 RxIntrCts; + SK_U64 TxIntrCts; + SK_U64 RxNoBufCts; + SK_U64 TxNoBufCts; + SK_U64 TxUsedDescrNo; + SK_U64 RxDeliveredCts; + SK_U64 RxOctetsDeliveredCts; + SK_U64 RxHwErrorsCts; + SK_U64 TxHwErrorsCts; + SK_U64 InErrorsCts; + SK_U64 OutErrorsCts; + SK_U64 ErrRecoveryCts; + SK_U64 RxShortZeroMark; + SK_U64 CounterOffset[SK_PNMI_CNT_NO]; + SK_U32 CounterHigh[SK_PNMI_CNT_NO]; + SK_BOOL ActiveFlag; + SK_U8 Align[3]; +} SK_PNMI_PORT; + + +typedef struct s_PnmiData { + SK_PNMI_PORT Port [SK_MAX_MACS]; + SK_PNMI_PORT BufPort [SK_MAX_MACS]; /* 2002-09-13 pweber */ + SK_U64 VirtualCounterOffset[SK_PNMI_CNT_NO]; + SK_U32 TestResult; + char HwVersion[10]; + SK_U16 Align01; + + char *pDriverDescription; + char *pDriverVersion; + char *pDriverReleaseDate; + char *pDriverFileName; + + int MacUpdatedFlag; + int RlmtUpdatedFlag; + int SirqUpdatedFlag; + + SK_U64 RlmtChangeCts; + SK_U64 RlmtChangeTime; + SK_PNMI_ESTIMATE RlmtChangeEstimate; + SK_U64 RlmtChangeThreshold; + + SK_U64 StartUpTime; + SK_U32 DeviceType; + char PciBusSpeed; + char PciBusWidth; + char Chipset; + char PMD; + char Connector; + SK_BOOL DualNetActiveFlag; + SK_U16 Align02; + + char TrapBuf[SK_PNMI_TRAP_QUEUE_LEN]; + unsigned int TrapBufFree; + unsigned int TrapQueueBeg; + unsigned int TrapQueueEnd; + unsigned int TrapBufPad; + unsigned int TrapUnique; + SK_U8 VctStatus[SK_MAX_MACS]; + SK_PNMI_VCT VctBackup[SK_MAX_MACS]; + SK_PNMI_VCT_TIMER VctTimeout[SK_MAX_MACS]; +#ifdef SK_DIAG_SUPPORT + SK_U32 DiagAttached; +#endif /* SK_DIAG_SUPPORT */ +} SK_PNMI; + + +/* + * Function prototypes + */ +extern int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int Level); +extern int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void* pBuf, + unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); +extern int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf, + unsigned int *pLen, SK_U32 NetIndex); +extern int SkPnmiPreSetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf, + unsigned int *pLen, SK_U32 NetIndex); +extern int SkPnmiSetStruct(SK_AC *pAC, SK_IOC IoC, void* pBuf, + unsigned int *pLen, SK_U32 NetIndex); +extern int SkPnmiEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, + SK_EVPARA Param); +extern int SkPnmiGenIoctl(SK_AC *pAC, SK_IOC IoC, void * pBuf, + unsigned int * pLen, SK_U32 NetIndex); + +#endif diff --git a/drivers/net/sk98lin/h/skgesirq.h b/drivers/net/sk98lin/h/skgesirq.h new file mode 100644 index 00000000000..3eec6274e41 --- /dev/null +++ b/drivers/net/sk98lin/h/skgesirq.h @@ -0,0 +1,110 @@ +/****************************************************************************** + * + * Name: skgesirq.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.30 $ + * Date: $Date: 2003/07/04 12:34:13 $ + * Purpose: SK specific Gigabit Ethernet special IRQ functions + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef _INC_SKGESIRQ_H_ +#define _INC_SKGESIRQ_H_ + +/* Define return codes of SkGePortCheckUp and CheckShort */ +#define SK_HW_PS_NONE 0 /* No action needed */ +#define SK_HW_PS_RESTART 1 /* Restart needed */ +#define SK_HW_PS_LINK 2 /* Link Up actions needed */ + +/* + * Define the Event the special IRQ/INI module can handle + */ +#define SK_HWEV_WATIM 1 /* Timeout for WA Errata #2 XMAC */ +#define SK_HWEV_PORT_START 2 /* Port Start Event by RLMT */ +#define SK_HWEV_PORT_STOP 3 /* Port Stop Event by RLMT */ +#define SK_HWEV_CLEAR_STAT 4 /* Clear Statistics by PNMI */ +#define SK_HWEV_UPDATE_STAT 5 /* Update Statistics by PNMI */ +#define SK_HWEV_SET_LMODE 6 /* Set Link Mode by PNMI */ +#define SK_HWEV_SET_FLOWMODE 7 /* Set Flow Control Mode by PNMI */ +#define SK_HWEV_SET_ROLE 8 /* Set Master/Slave (Role) by PNMI */ +#define SK_HWEV_SET_SPEED 9 /* Set Link Speed by PNMI */ +#define SK_HWEV_HALFDUP_CHK 10 /* Half Duplex Hangup Workaround */ + +#define SK_WA_ACT_TIME (5000000UL) /* 5 sec */ +#define SK_WA_INA_TIME (100000UL) /* 100 msec */ + +#define SK_HALFDUP_CHK_TIME (10000UL) /* 10 msec */ + +/* + * Define the error numbers and messages + */ +#define SKERR_SIRQ_E001 (SK_ERRBASE_SIRQ+0) +#define SKERR_SIRQ_E001MSG "Unknown event" +#define SKERR_SIRQ_E002 (SKERR_SIRQ_E001+1) +#define SKERR_SIRQ_E002MSG "Packet timeout RX1" +#define SKERR_SIRQ_E003 (SKERR_SIRQ_E002+1) +#define SKERR_SIRQ_E003MSG "Packet timeout RX2" +#define SKERR_SIRQ_E004 (SKERR_SIRQ_E003+1) +#define SKERR_SIRQ_E004MSG "MAC 1 not correctly initialized" +#define SKERR_SIRQ_E005 (SKERR_SIRQ_E004+1) +#define SKERR_SIRQ_E005MSG "MAC 2 not correctly initialized" +#define SKERR_SIRQ_E006 (SKERR_SIRQ_E005+1) +#define SKERR_SIRQ_E006MSG "CHECK failure R1" +#define SKERR_SIRQ_E007 (SKERR_SIRQ_E006+1) +#define SKERR_SIRQ_E007MSG "CHECK failure R2" +#define SKERR_SIRQ_E008 (SKERR_SIRQ_E007+1) +#define SKERR_SIRQ_E008MSG "CHECK failure XS1" +#define SKERR_SIRQ_E009 (SKERR_SIRQ_E008+1) +#define SKERR_SIRQ_E009MSG "CHECK failure XA1" +#define SKERR_SIRQ_E010 (SKERR_SIRQ_E009+1) +#define SKERR_SIRQ_E010MSG "CHECK failure XS2" +#define SKERR_SIRQ_E011 (SKERR_SIRQ_E010+1) +#define SKERR_SIRQ_E011MSG "CHECK failure XA2" +#define SKERR_SIRQ_E012 (SKERR_SIRQ_E011+1) +#define SKERR_SIRQ_E012MSG "unexpected IRQ Master error" +#define SKERR_SIRQ_E013 (SKERR_SIRQ_E012+1) +#define SKERR_SIRQ_E013MSG "unexpected IRQ Status error" +#define SKERR_SIRQ_E014 (SKERR_SIRQ_E013+1) +#define SKERR_SIRQ_E014MSG "Parity error on RAM (read)" +#define SKERR_SIRQ_E015 (SKERR_SIRQ_E014+1) +#define SKERR_SIRQ_E015MSG "Parity error on RAM (write)" +#define SKERR_SIRQ_E016 (SKERR_SIRQ_E015+1) +#define SKERR_SIRQ_E016MSG "Parity error MAC 1" +#define SKERR_SIRQ_E017 (SKERR_SIRQ_E016+1) +#define SKERR_SIRQ_E017MSG "Parity error MAC 2" +#define SKERR_SIRQ_E018 (SKERR_SIRQ_E017+1) +#define SKERR_SIRQ_E018MSG "Parity error RX 1" +#define SKERR_SIRQ_E019 (SKERR_SIRQ_E018+1) +#define SKERR_SIRQ_E019MSG "Parity error RX 2" +#define SKERR_SIRQ_E020 (SKERR_SIRQ_E019+1) +#define SKERR_SIRQ_E020MSG "MAC transmit FIFO underrun" +#define SKERR_SIRQ_E021 (SKERR_SIRQ_E020+1) +#define SKERR_SIRQ_E021MSG "Spurious TWSI interrupt" +#define SKERR_SIRQ_E022 (SKERR_SIRQ_E021+1) +#define SKERR_SIRQ_E022MSG "Cable pair swap error" +#define SKERR_SIRQ_E023 (SKERR_SIRQ_E022+1) +#define SKERR_SIRQ_E023MSG "Auto-negotiation error" +#define SKERR_SIRQ_E024 (SKERR_SIRQ_E023+1) +#define SKERR_SIRQ_E024MSG "FIFO overflow error" +#define SKERR_SIRQ_E025 (SKERR_SIRQ_E024+1) +#define SKERR_SIRQ_E025MSG "2 Pair Downshift detected" + +extern void SkGeSirqIsr(SK_AC *pAC, SK_IOC IoC, SK_U32 Istatus); +extern int SkGeSirqEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para); +extern void SkHWLinkDown(SK_AC *pAC, SK_IOC IoC, int Port); + +#endif /* _INC_SKGESIRQ_H_ */ diff --git a/drivers/net/sk98lin/h/ski2c.h b/drivers/net/sk98lin/h/ski2c.h new file mode 100644 index 00000000000..6a63f4a15de --- /dev/null +++ b/drivers/net/sk98lin/h/ski2c.h @@ -0,0 +1,174 @@ +/****************************************************************************** + * + * Name: ski2c.h + * Project: Gigabit Ethernet Adapters, TWSI-Module + * Version: $Revision: 1.35 $ + * Date: $Date: 2003/10/20 09:06:30 $ + * Purpose: Defines to access Voltage and Temperature Sensor + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * SKI2C.H contains all I2C specific defines + */ + +#ifndef _SKI2C_H_ +#define _SKI2C_H_ + +typedef struct s_Sensor SK_SENSOR; + +#include "h/skgei2c.h" + +/* + * Define the I2C events. + */ +#define SK_I2CEV_IRQ 1 /* IRQ happened Event */ +#define SK_I2CEV_TIM 2 /* Timeout event */ +#define SK_I2CEV_CLEAR 3 /* Clear MIB Values */ + +/* + * Define READ and WRITE Constants. + */ +#define I2C_READ 0 +#define I2C_WRITE 1 +#define I2C_BURST 1 +#define I2C_SINGLE 0 + +#define SKERR_I2C_E001 (SK_ERRBASE_I2C+0) +#define SKERR_I2C_E001MSG "Sensor index unknown" +#define SKERR_I2C_E002 (SKERR_I2C_E001+1) +#define SKERR_I2C_E002MSG "TWSI: transfer does not complete" +#define SKERR_I2C_E003 (SKERR_I2C_E002+1) +#define SKERR_I2C_E003MSG "LM80: NAK on device send" +#define SKERR_I2C_E004 (SKERR_I2C_E003+1) +#define SKERR_I2C_E004MSG "LM80: NAK on register send" +#define SKERR_I2C_E005 (SKERR_I2C_E004+1) +#define SKERR_I2C_E005MSG "LM80: NAK on device (2) send" +#define SKERR_I2C_E006 (SKERR_I2C_E005+1) +#define SKERR_I2C_E006MSG "Unknown event" +#define SKERR_I2C_E007 (SKERR_I2C_E006+1) +#define SKERR_I2C_E007MSG "LM80 read out of state" +#define SKERR_I2C_E008 (SKERR_I2C_E007+1) +#define SKERR_I2C_E008MSG "Unexpected sensor read completed" +#define SKERR_I2C_E009 (SKERR_I2C_E008+1) +#define SKERR_I2C_E009MSG "WARNING: temperature sensor out of range" +#define SKERR_I2C_E010 (SKERR_I2C_E009+1) +#define SKERR_I2C_E010MSG "WARNING: voltage sensor out of range" +#define SKERR_I2C_E011 (SKERR_I2C_E010+1) +#define SKERR_I2C_E011MSG "ERROR: temperature sensor out of range" +#define SKERR_I2C_E012 (SKERR_I2C_E011+1) +#define SKERR_I2C_E012MSG "ERROR: voltage sensor out of range" +#define SKERR_I2C_E013 (SKERR_I2C_E012+1) +#define SKERR_I2C_E013MSG "ERROR: couldn't init sensor" +#define SKERR_I2C_E014 (SKERR_I2C_E013+1) +#define SKERR_I2C_E014MSG "WARNING: fan sensor out of range" +#define SKERR_I2C_E015 (SKERR_I2C_E014+1) +#define SKERR_I2C_E015MSG "ERROR: fan sensor out of range" +#define SKERR_I2C_E016 (SKERR_I2C_E015+1) +#define SKERR_I2C_E016MSG "TWSI: active transfer does not complete" + +/* + * Define Timeout values + */ +#define SK_I2C_TIM_LONG 2000000L /* 2 seconds */ +#define SK_I2C_TIM_SHORT 100000L /* 100 milliseconds */ +#define SK_I2C_TIM_WATCH 1000000L /* 1 second */ + +/* + * Define trap and error log hold times + */ +#ifndef SK_SEN_ERR_TR_HOLD +#define SK_SEN_ERR_TR_HOLD (4*SK_TICKS_PER_SEC) +#endif +#ifndef SK_SEN_ERR_LOG_HOLD +#define SK_SEN_ERR_LOG_HOLD (60*SK_TICKS_PER_SEC) +#endif +#ifndef SK_SEN_WARN_TR_HOLD +#define SK_SEN_WARN_TR_HOLD (15*SK_TICKS_PER_SEC) +#endif +#ifndef SK_SEN_WARN_LOG_HOLD +#define SK_SEN_WARN_LOG_HOLD (15*60*SK_TICKS_PER_SEC) +#endif + +/* + * Defines for SenType + */ +#define SK_SEN_UNKNOWN 0 +#define SK_SEN_TEMP 1 +#define SK_SEN_VOLT 2 +#define SK_SEN_FAN 3 + +/* + * Define for the SenErrorFlag + */ +#define SK_SEN_ERR_NOT_PRESENT 0 /* Error Flag: Sensor not present */ +#define SK_SEN_ERR_OK 1 /* Error Flag: O.K. */ +#define SK_SEN_ERR_WARN 2 /* Error Flag: Warning */ +#define SK_SEN_ERR_ERR 3 /* Error Flag: Error */ +#define SK_SEN_ERR_FAULTY 4 /* Error Flag: Faulty */ + +/* + * Define the Sensor struct + */ +struct s_Sensor { + char *SenDesc; /* Description */ + int SenType; /* Voltage or Temperature */ + SK_I32 SenValue; /* Current value of the sensor */ + SK_I32 SenThreErrHigh; /* High error Threshhold of this sensor */ + SK_I32 SenThreWarnHigh; /* High warning Threshhold of this sensor */ + SK_I32 SenThreErrLow; /* Lower error Threshold of the sensor */ + SK_I32 SenThreWarnLow; /* Lower warning Threshold of the sensor */ + int SenErrFlag; /* Sensor indicated an error */ + SK_BOOL SenInit; /* Is sensor initialized ? */ + SK_U64 SenErrCts; /* Error trap counter */ + SK_U64 SenWarnCts; /* Warning trap counter */ + SK_U64 SenBegErrTS; /* Begin error timestamp */ + SK_U64 SenBegWarnTS; /* Begin warning timestamp */ + SK_U64 SenLastErrTrapTS; /* Last error trap timestamp */ + SK_U64 SenLastErrLogTS; /* Last error log timestamp */ + SK_U64 SenLastWarnTrapTS; /* Last warning trap timestamp */ + SK_U64 SenLastWarnLogTS; /* Last warning log timestamp */ + int SenState; /* Sensor State (see HW specific include) */ + int (*SenRead)(SK_AC *pAC, SK_IOC IoC, struct s_Sensor *pSen); + /* Sensors read function */ + SK_U16 SenReg; /* Register Address for this sensor */ + SK_U8 SenDev; /* Device Selection for this sensor */ +}; + +typedef struct s_I2c { + SK_SENSOR SenTable[SK_MAX_SENSORS]; /* Sensor Table */ + int CurrSens; /* Which sensor is currently queried */ + int MaxSens; /* Max. number of sensors */ + int TimerMode; /* Use the timer also to watch the state machine */ + int InitLevel; /* Initialized Level */ +#ifndef SK_DIAG + int DummyReads; /* Number of non-checked dummy reads */ + SK_TIMER SenTimer; /* Sensors timer */ +#endif /* !SK_DIAG */ +} SK_I2C; + +extern int SkI2cInit(SK_AC *pAC, SK_IOC IoC, int Level); +#ifdef SK_DIAG +extern SK_U32 SkI2cRead(SK_AC *pAC, SK_IOC IoC, int Dev, int Size, int Reg, + int Burst); +#else /* !SK_DIAG */ +extern int SkI2cEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para); +extern void SkI2cWaitIrq(SK_AC *pAC, SK_IOC IoC); +extern void SkI2cIsr(SK_AC *pAC, SK_IOC IoC); +#endif /* !SK_DIAG */ +#endif /* n_SKI2C_H */ + diff --git a/drivers/net/sk98lin/h/skqueue.h b/drivers/net/sk98lin/h/skqueue.h new file mode 100644 index 00000000000..2ec40d4fdf6 --- /dev/null +++ b/drivers/net/sk98lin/h/skqueue.h @@ -0,0 +1,94 @@ +/****************************************************************************** + * + * Name: skqueue.h + * Project: Gigabit Ethernet Adapters, Event Scheduler Module + * Version: $Revision: 1.16 $ + * Date: $Date: 2003/09/16 12:50:32 $ + * Purpose: Defines for the Event queue + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * SKQUEUE.H contains all defines and types for the event queue + */ + +#ifndef _SKQUEUE_H_ +#define _SKQUEUE_H_ + + +/* + * define the event classes to be served + */ +#define SKGE_DRV 1 /* Driver Event Class */ +#define SKGE_RLMT 2 /* RLMT Event Class */ +#define SKGE_I2C 3 /* I2C Event Class */ +#define SKGE_PNMI 4 /* PNMI Event Class */ +#define SKGE_CSUM 5 /* Checksum Event Class */ +#define SKGE_HWAC 6 /* Hardware Access Event Class */ + +#define SKGE_SWT 9 /* Software Timer Event Class */ +#define SKGE_LACP 10 /* LACP Aggregation Event Class */ +#define SKGE_RSF 11 /* RSF Aggregation Event Class */ +#define SKGE_MARKER 12 /* MARKER Aggregation Event Class */ +#define SKGE_FD 13 /* FD Distributor Event Class */ + +/* + * define event queue as circular buffer + */ +#define SK_MAX_EVENT 64 + +/* + * Parameter union for the Para stuff + */ +typedef union u_EvPara { + void *pParaPtr; /* Parameter Pointer */ + SK_U64 Para64; /* Parameter 64bit version */ + SK_U32 Para32[2]; /* Parameter Array of 32bit parameters */ +} SK_EVPARA; + +/* + * Event Queue + * skqueue.c + * events are class/value pairs + * class is addressee, e.g. RLMT, PNMI etc. + * value is command, e.g. line state change, ring op change etc. + */ +typedef struct s_EventElem { + SK_U32 Class; /* Event class */ + SK_U32 Event; /* Event value */ + SK_EVPARA Para; /* Event parameter */ +} SK_EVENTELEM; + +typedef struct s_Queue { + SK_EVENTELEM EvQueue[SK_MAX_EVENT]; + SK_EVENTELEM *EvPut; + SK_EVENTELEM *EvGet; +} SK_QUEUE; + +extern void SkEventInit(SK_AC *pAC, SK_IOC Ioc, int Level); +extern void SkEventQueue(SK_AC *pAC, SK_U32 Class, SK_U32 Event, + SK_EVPARA Para); +extern int SkEventDispatcher(SK_AC *pAC, SK_IOC Ioc); + + +/* Define Error Numbers and messages */ +#define SKERR_Q_E001 (SK_ERRBASE_QUEUE+0) +#define SKERR_Q_E001MSG "Event queue overflow" +#define SKERR_Q_E002 (SKERR_Q_E001+1) +#define SKERR_Q_E002MSG "Undefined event class" +#endif /* _SKQUEUE_H_ */ + diff --git a/drivers/net/sk98lin/h/skrlmt.h b/drivers/net/sk98lin/h/skrlmt.h new file mode 100644 index 00000000000..ca75dfdcf2d --- /dev/null +++ b/drivers/net/sk98lin/h/skrlmt.h @@ -0,0 +1,438 @@ +/****************************************************************************** + * + * Name: skrlmt.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.37 $ + * Date: $Date: 2003/04/15 09:43:43 $ + * Purpose: Header file for Redundant Link ManagemenT. + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This is the header file for Redundant Link ManagemenT. + * + * Include File Hierarchy: + * + * "skdrv1st.h" + * ... + * "sktypes.h" + * "skqueue.h" + * "skaddr.h" + * "skrlmt.h" + * ... + * "skdrv2nd.h" + * + ******************************************************************************/ + +#ifndef __INC_SKRLMT_H +#define __INC_SKRLMT_H + +#ifdef __cplusplus +extern "C" { +#endif /* cplusplus */ + +/* defines ********************************************************************/ + +#define SK_RLMT_NET_DOWN_TEMP 1 /* NET_DOWN due to last port down. */ +#define SK_RLMT_NET_DOWN_FINAL 2 /* NET_DOWN due to RLMT_STOP. */ + +/* ----- Default queue sizes - must be multiples of 8 KB ----- */ + +/* Less than 8 KB free in RX queue => pause frames. */ +#define SK_RLMT_STANDBY_QRXSIZE 128 /* Size of rx standby queue in KB. */ +#define SK_RLMT_STANDBY_QXASIZE 32 /* Size of async standby queue in KB. */ +#define SK_RLMT_STANDBY_QXSSIZE 0 /* Size of sync standby queue in KB. */ + +#define SK_RLMT_MAX_TX_BUF_SIZE 60 /* Maximum RLMT transmit size. */ + +/* ----- PORT states ----- */ + +#define SK_RLMT_PS_INIT 0 /* Port state: Init. */ +#define SK_RLMT_PS_LINK_DOWN 1 /* Port state: Link down. */ +#define SK_RLMT_PS_DOWN 2 /* Port state: Port down. */ +#define SK_RLMT_PS_GOING_UP 3 /* Port state: Going up. */ +#define SK_RLMT_PS_UP 4 /* Port state: Up. */ + +/* ----- RLMT states ----- */ + +#define SK_RLMT_RS_INIT 0 /* RLMT state: Init. */ +#define SK_RLMT_RS_NET_DOWN 1 /* RLMT state: Net down. */ +#define SK_RLMT_RS_NET_UP 2 /* RLMT state: Net up. */ + +/* ----- PORT events ----- */ + +#define SK_RLMT_LINK_UP 1001 /* Link came up. */ +#define SK_RLMT_LINK_DOWN 1002 /* Link went down. */ +#define SK_RLMT_PORT_ADDR 1003 /* Port address changed. */ + +/* ----- RLMT events ----- */ + +#define SK_RLMT_START 2001 /* Start RLMT. */ +#define SK_RLMT_STOP 2002 /* Stop RLMT. */ +#define SK_RLMT_PACKET_RECEIVED 2003 /* Packet was received for RLMT. */ +#define SK_RLMT_STATS_CLEAR 2004 /* Clear statistics. */ +#define SK_RLMT_STATS_UPDATE 2005 /* Update statistics. */ +#define SK_RLMT_PREFPORT_CHANGE 2006 /* Change preferred port. */ +#define SK_RLMT_MODE_CHANGE 2007 /* New RlmtMode. */ +#define SK_RLMT_SET_NETS 2008 /* Number of Nets (1 or 2). */ + +/* ----- RLMT mode bits ----- */ + +/* + * CAUTION: These defines are private to RLMT. + * Please use the RLMT mode defines below. + */ + +#define SK_RLMT_CHECK_LINK 1 /* Check Link. */ +#define SK_RLMT_CHECK_LOC_LINK 2 /* Check other link on same adapter. */ +#define SK_RLMT_CHECK_SEG 4 /* Check segmentation. */ + +#ifndef RLMT_CHECK_REMOTE +#define SK_RLMT_CHECK_OTHERS SK_RLMT_CHECK_LOC_LINK +#else /* RLMT_CHECK_REMOTE */ +#define SK_RLMT_CHECK_REM_LINK 8 /* Check link(s) on other adapter(s). */ +#define SK_RLMT_MAX_REMOTE_PORTS_CHECKED 3 +#define SK_RLMT_CHECK_OTHERS \ + (SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK) +#endif /* RLMT_CHECK_REMOTE */ + +#ifndef SK_RLMT_ENABLE_TRANSPARENT +#define SK_RLMT_TRANSPARENT 0 /* RLMT transparent - inactive. */ +#else /* SK_RLMT_ENABLE_TRANSPARENT */ +#define SK_RLMT_TRANSPARENT 128 /* RLMT transparent. */ +#endif /* SK_RLMT_ENABLE_TRANSPARENT */ + +/* ----- RLMT modes ----- */ + +/* Check Link State. */ +#define SK_RLMT_MODE_CLS (SK_RLMT_CHECK_LINK) + +/* Check Local Ports: check other links on the same adapter. */ +#define SK_RLMT_MODE_CLP (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK) + +/* Check Local Ports and Segmentation Status. */ +#define SK_RLMT_MODE_CLPSS \ + (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_SEG) + +#ifdef RLMT_CHECK_REMOTE +/* Check Local and Remote Ports: check links (local or remote). */ + Name of define TBD! +#define SK_RLMT_MODE_CRP \ + (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK) + +/* Check Local and Remote Ports and Segmentation Status. */ + Name of define TBD! +#define SK_RLMT_MODE_CRPSS \ + (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | \ + SK_RLMT_CHECK_REM_LINK | SK_RLMT_CHECK_SEG) +#endif /* RLMT_CHECK_REMOTE */ + +/* ----- RLMT lookahead result bits ----- */ + +#define SK_RLMT_RX_RLMT 1 /* Give packet to RLMT. */ +#define SK_RLMT_RX_PROTOCOL 2 /* Give packet to protocol. */ + +/* Macros */ + +#if 0 +SK_AC *pAC /* adapter context */ +SK_U32 PortNum /* receiving port */ +unsigned PktLen /* received packet's length */ +SK_BOOL IsBc /* Flag: packet is broadcast */ +unsigned *pOffset /* offs. of bytes to present to SK_RLMT_LOOKAHEAD */ +unsigned *pNumBytes /* #Bytes to present to SK_RLMT_LOOKAHEAD */ +#endif /* 0 */ + +#define SK_RLMT_PRE_LOOKAHEAD(pAC,PortNum,PktLen,IsBc,pOffset,pNumBytes) { \ + SK_AC *_pAC; \ + SK_U32 _PortNum; \ + _pAC = (pAC); \ + _PortNum = (SK_U32)(PortNum); \ + /* _pAC->Rlmt.Port[_PortNum].PacketsRx++; */ \ + _pAC->Rlmt.Port[_PortNum].PacketsPerTimeSlot++; \ + if (_pAC->Rlmt.RlmtOff) { \ + *(pNumBytes) = 0; \ + } \ + else {\ + if ((_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_TRANSPARENT) != 0) { \ + *(pNumBytes) = 0; \ + } \ + else if (IsBc) { \ + if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode != SK_RLMT_MODE_CLS) { \ + *(pNumBytes) = 6; \ + *(pOffset) = 6; \ + } \ + else { \ + *(pNumBytes) = 0; \ + } \ + } \ + else { \ + if ((PktLen) > SK_RLMT_MAX_TX_BUF_SIZE) { \ + /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ + *(pNumBytes) = 0; \ + } \ + else { \ + *(pNumBytes) = 6; \ + *(pOffset) = 0; \ + } \ + } \ + } \ +} + +#if 0 +SK_AC *pAC /* adapter context */ +SK_U32 PortNum /* receiving port */ +SK_U8 *pLaPacket, /* received packet's data (points to pOffset) */ +SK_BOOL IsBc /* Flag: packet is broadcast */ +SK_BOOL IsMc /* Flag: packet is multicast */ +unsigned *pForRlmt /* Result: bits SK_RLMT_RX_RLMT, SK_RLMT_RX_PROTOCOL */ +SK_RLMT_LOOKAHEAD() expects *pNumBytes from +packet offset *pOffset (s.a.) at *pLaPacket. + +If you use SK_RLMT_LOOKAHEAD in a path where you already know if the packet is +BC, MC, or UC, you should use constants for IsBc and IsMc, so that your compiler +can trash unneeded parts of the if construction. +#endif /* 0 */ + +#define SK_RLMT_LOOKAHEAD(pAC,PortNum,pLaPacket,IsBc,IsMc,pForRlmt) { \ + SK_AC *_pAC; \ + SK_U32 _PortNum; \ + SK_U8 *_pLaPacket; \ + _pAC = (pAC); \ + _PortNum = (SK_U32)(PortNum); \ + _pLaPacket = (SK_U8 *)(pLaPacket); \ + if (IsBc) {\ + if (!SK_ADDR_EQUAL(_pLaPacket, _pAC->Addr.Net[_pAC->Rlmt.Port[ \ + _PortNum].Net->NetNumber].CurrentMacAddress.a)) { \ + _pAC->Rlmt.Port[_PortNum].BcTimeStamp = SkOsGetTime(_pAC); \ + _pAC->Rlmt.CheckSwitch = SK_TRUE; \ + } \ + /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ + *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ + } \ + else if (IsMc) { \ + if (SK_ADDR_EQUAL(_pLaPacket, BridgeMcAddr.a)) { \ + _pAC->Rlmt.Port[_PortNum].BpduPacketsPerTimeSlot++; \ + if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_CHECK_SEG) { \ + *(pForRlmt) = SK_RLMT_RX_RLMT | SK_RLMT_RX_PROTOCOL; \ + } \ + else { \ + *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ + } \ + } \ + else if (SK_ADDR_EQUAL(_pLaPacket, SkRlmtMcAddr.a)) { \ + *(pForRlmt) = SK_RLMT_RX_RLMT; \ + } \ + else { \ + /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ + *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ + } \ + } \ + else { \ + if (SK_ADDR_EQUAL( \ + _pLaPacket, \ + _pAC->Addr.Port[_PortNum].CurrentMacAddress.a)) { \ + *(pForRlmt) = SK_RLMT_RX_RLMT; \ + } \ + else { \ + /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ + *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ + } \ + } \ +} + +#ifdef SK_RLMT_FAST_LOOKAHEAD +Error: SK_RLMT_FAST_LOOKAHEAD no longer used. Use new macros for lookahead. +#endif /* SK_RLMT_FAST_LOOKAHEAD */ +#ifdef SK_RLMT_SLOW_LOOKAHEAD +Error: SK_RLMT_SLOW_LOOKAHEAD no longer used. Use new macros for lookahead. +#endif /* SK_RLMT_SLOW_LOOKAHEAD */ + +/* typedefs *******************************************************************/ + +#ifdef SK_RLMT_MBUF_PRIVATE +typedef struct s_RlmtMbuf { + some content +} SK_RLMT_MBUF; +#endif /* SK_RLMT_MBUF_PRIVATE */ + + +#ifdef SK_LA_INFO +typedef struct s_Rlmt_PacketInfo { + unsigned PacketLength; /* Length of packet. */ + unsigned PacketType; /* Directed/Multicast/Broadcast. */ +} SK_RLMT_PINFO; +#endif /* SK_LA_INFO */ + + +typedef struct s_RootId { + SK_U8 Id[8]; /* Root Bridge Id. */ +} SK_RLMT_ROOT_ID; + + +typedef struct s_port { + SK_MAC_ADDR CheckAddr; + SK_BOOL SuspectTx; +} SK_PORT_CHECK; + + +typedef struct s_RlmtNet SK_RLMT_NET; + + +typedef struct s_RlmtPort { + +/* ----- Public part (read-only) ----- */ + + SK_U8 PortState; /* Current state of this port. */ + + /* For PNMI */ + SK_BOOL LinkDown; + SK_BOOL PortDown; + SK_U8 Align01; + + SK_U32 PortNumber; /* Number of port on adapter. */ + SK_RLMT_NET * Net; /* Net port belongs to. */ + + SK_U64 TxHelloCts; + SK_U64 RxHelloCts; + SK_U64 TxSpHelloReqCts; + SK_U64 RxSpHelloCts; + +/* ----- Private part ----- */ + +/* SK_U64 PacketsRx; */ /* Total packets received. */ + SK_U32 PacketsPerTimeSlot; /* Packets rxed between TOs. */ +/* SK_U32 DataPacketsPerTimeSlot; */ /* Data packets ... */ + SK_U32 BpduPacketsPerTimeSlot; /* BPDU packets rxed in TS. */ + SK_U64 BcTimeStamp; /* Time of last BC receive. */ + SK_U64 GuTimeStamp; /* Time of entering GOING_UP. */ + + SK_TIMER UpTimer; /* Timer struct Link/Port up. */ + SK_TIMER DownRxTimer; /* Timer struct down rx. */ + SK_TIMER DownTxTimer; /* Timer struct down tx. */ + + SK_U32 CheckingState; /* Checking State. */ + + SK_ADDR_PORT * AddrPort; + + SK_U8 Random[4]; /* Random value. */ + unsigned PortsChecked; /* #ports checked. */ + unsigned PortsSuspect; /* #ports checked that are s. */ + SK_PORT_CHECK PortCheck[1]; +/* SK_PORT_CHECK PortCheck[SK_MAX_MACS - 1]; */ + + SK_BOOL PortStarted; /* Port is started. */ + SK_BOOL PortNoRx; /* NoRx for >= 1 time slot. */ + SK_BOOL RootIdSet; + SK_RLMT_ROOT_ID Root; /* Root Bridge Id. */ +} SK_RLMT_PORT; + + +struct s_RlmtNet { + +/* ----- Public part (read-only) ----- */ + + SK_U32 NetNumber; /* Number of net. */ + + SK_RLMT_PORT * Port[SK_MAX_MACS]; /* Ports that belong to this net. */ + SK_U32 NumPorts; /* Number of ports. */ + SK_U32 PrefPort; /* Preferred port. */ + + /* For PNMI */ + + SK_U32 ChgBcPrio; /* Change Priority of last broadcast received */ + SK_U32 RlmtMode; /* Check ... */ + SK_U32 ActivePort; /* Active port. */ + SK_U32 Preference; /* 0xFFFFFFFF: Automatic. */ + + SK_U8 RlmtState; /* Current RLMT state. */ + +/* ----- Private part ----- */ + SK_BOOL RootIdSet; + SK_U16 Align01; + + int LinksUp; /* #Links up. */ + int PortsUp; /* #Ports up. */ + SK_U32 TimeoutValue; /* RLMT timeout value. */ + + SK_U32 CheckingState; /* Checking State. */ + SK_RLMT_ROOT_ID Root; /* Root Bridge Id. */ + + SK_TIMER LocTimer; /* Timer struct. */ + SK_TIMER SegTimer; /* Timer struct. */ +}; + + +typedef struct s_Rlmt { + +/* ----- Public part (read-only) ----- */ + + SK_U32 NumNets; /* Number of nets. */ + SK_U32 NetsStarted; /* Number of nets started. */ + SK_RLMT_NET Net[SK_MAX_NETS]; /* Array of available nets. */ + SK_RLMT_PORT Port[SK_MAX_MACS]; /* Array of available ports. */ + +/* ----- Private part ----- */ + SK_BOOL CheckSwitch; + SK_BOOL RlmtOff; /* set to zero if the Mac addresses + are equal or the second one + is zero */ + SK_U16 Align01; + +} SK_RLMT; + + +extern SK_MAC_ADDR BridgeMcAddr; +extern SK_MAC_ADDR SkRlmtMcAddr; + +/* function prototypes ********************************************************/ + + +#ifndef SK_KR_PROTO + +/* Functions provided by SkRlmt */ + +/* ANSI/C++ compliant function prototypes */ + +extern void SkRlmtInit( + SK_AC *pAC, + SK_IOC IoC, + int Level); + +extern int SkRlmtEvent( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 Event, + SK_EVPARA Para); + +#else /* defined(SK_KR_PROTO) */ + +/* Non-ANSI/C++ compliant function prototypes */ + +#error KR-style function prototypes are not yet provided. + +#endif /* defined(SK_KR_PROTO)) */ + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_SKRLMT_H */ diff --git a/drivers/net/sk98lin/h/sktimer.h b/drivers/net/sk98lin/h/sktimer.h new file mode 100644 index 00000000000..04e6d7c1ec3 --- /dev/null +++ b/drivers/net/sk98lin/h/sktimer.h @@ -0,0 +1,63 @@ +/****************************************************************************** + * + * Name: sktimer.h + * Project: Gigabit Ethernet Adapters, Event Scheduler Module + * Version: $Revision: 1.11 $ + * Date: $Date: 2003/09/16 12:58:18 $ + * Purpose: Defines for the timer functions + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * SKTIMER.H contains all defines and types for the timer functions + */ + +#ifndef _SKTIMER_H_ +#define _SKTIMER_H_ + +#include "h/skqueue.h" + +/* + * SK timer + * - needed wherever a timer is used. Put this in your data structure + * wherever you want. + */ +typedef struct s_Timer SK_TIMER; + +struct s_Timer { + SK_TIMER *TmNext; /* linked list */ + SK_U32 TmClass; /* Timer Event class */ + SK_U32 TmEvent; /* Timer Event value */ + SK_EVPARA TmPara; /* Timer Event parameter */ + SK_U32 TmDelta; /* delta time */ + int TmActive; /* flag: active/inactive */ +}; + +/* + * Timer control struct. + * - use in Adapters context name pAC->Tim + */ +typedef struct s_TimCtrl { + SK_TIMER *StQueue; /* Head of Timer queue */ +} SK_TIMCTRL; + +extern void SkTimerInit(SK_AC *pAC, SK_IOC Ioc, int Level); +extern void SkTimerStop(SK_AC *pAC, SK_IOC Ioc, SK_TIMER *pTimer); +extern void SkTimerStart(SK_AC *pAC, SK_IOC Ioc, SK_TIMER *pTimer, + SK_U32 Time, SK_U32 Class, SK_U32 Event, SK_EVPARA Para); +extern void SkTimerDone(SK_AC *pAC, SK_IOC Ioc); +#endif /* _SKTIMER_H_ */ diff --git a/drivers/net/sk98lin/h/sktypes.h b/drivers/net/sk98lin/h/sktypes.h new file mode 100644 index 00000000000..40edc96e105 --- /dev/null +++ b/drivers/net/sk98lin/h/sktypes.h @@ -0,0 +1,69 @@ +/****************************************************************************** + * + * Name: sktypes.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.2 $ + * Date: $Date: 2003/10/07 08:16:51 $ + * Purpose: Define data types for Linux + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * In this file, all data types that are needed by the common modules + * are mapped to Linux data types. + * + * + * Include File Hierarchy: + * + * + ******************************************************************************/ + +#ifndef __INC_SKTYPES_H +#define __INC_SKTYPES_H + + +/* defines *******************************************************************/ + +/* + * Data types with a specific size. 'I' = signed, 'U' = unsigned. + */ +#define SK_I8 s8 +#define SK_U8 u8 +#define SK_I16 s16 +#define SK_U16 u16 +#define SK_I32 s32 +#define SK_U32 u32 +#define SK_I64 s64 +#define SK_U64 u64 + +#define SK_UPTR ulong /* casting pointer <-> integral */ + +/* +* Boolean type. +*/ +#define SK_BOOL SK_U8 +#define SK_FALSE 0 +#define SK_TRUE (!SK_FALSE) + +/* typedefs *******************************************************************/ + +/* function prototypes ********************************************************/ + +#endif /* __INC_SKTYPES_H */ diff --git a/drivers/net/sk98lin/h/skversion.h b/drivers/net/sk98lin/h/skversion.h new file mode 100644 index 00000000000..a1a7294828e --- /dev/null +++ b/drivers/net/sk98lin/h/skversion.h @@ -0,0 +1,38 @@ +/****************************************************************************** + * + * Name: version.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.5 $ + * Date: $Date: 2003/10/07 08:16:51 $ + * Purpose: SK specific Error log support + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifdef lint +static const char SysKonnectFileId[] = "@(#) (C) SysKonnect GmbH."; +static const char SysKonnectBuildNumber[] = + "@(#)SK-BUILD: 6.23 PL: 01"; +#endif /* !defined(lint) */ + +#define BOOT_STRING "sk98lin: Network Device Driver v6.23\n" \ + "(C)Copyright 1999-2004 Marvell(R)." + +#define VER_STRING "6.23" +#define DRIVER_FILE_NAME "sk98lin" +#define DRIVER_REL_DATE "Feb-13-2004" + + diff --git a/drivers/net/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h new file mode 100644 index 00000000000..fdd9e48e804 --- /dev/null +++ b/drivers/net/sk98lin/h/skvpd.h @@ -0,0 +1,248 @@ +/****************************************************************************** + * + * Name: skvpd.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.15 $ + * Date: $Date: 2003/01/13 10:39:38 $ + * Purpose: Defines and Macros for VPD handling + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2003 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * skvpd.h contains Diagnostic specific defines for VPD handling + */ + +#ifndef __INC_SKVPD_H_ +#define __INC_SKVPD_H_ + +/* + * Define Resource Type Identifiers and VPD keywords + */ +#define RES_ID 0x82 /* Resource Type ID String (Product Name) */ +#define RES_VPD_R 0x90 /* start of VPD read only area */ +#define RES_VPD_W 0x91 /* start of VPD read/write area */ +#define RES_END 0x78 /* Resource Type End Tag */ + +#ifndef VPD_NAME +#define VPD_NAME "Name" /* Product Name, VPD name of RES_ID */ +#endif /* VPD_NAME */ +#define VPD_PN "PN" /* Adapter Part Number */ +#define VPD_EC "EC" /* Adapter Engineering Level */ +#define VPD_MN "MN" /* Manufacture ID */ +#define VPD_SN "SN" /* Serial Number */ +#define VPD_CP "CP" /* Extended Capability */ +#define VPD_RV "RV" /* Checksum and Reserved */ +#define VPD_YA "YA" /* Asset Tag Identifier */ +#define VPD_VL "VL" /* First Error Log Message (SK specific) */ +#define VPD_VF "VF" /* Second Error Log Message (SK specific) */ +#define VPD_RW "RW" /* Remaining Read / Write Area */ + +/* 'type' values for vpd_setup_para() */ +#define VPD_RO_KEY 1 /* RO keys are "PN", "EC", "MN", "SN", "RV" */ +#define VPD_RW_KEY 2 /* RW keys are "Yx", "Vx", and "RW" */ + +/* 'op' values for vpd_setup_para() */ +#define ADD_KEY 1 /* add the key at the pos "RV" or "RW" */ +#define OWR_KEY 2 /* overwrite key if already exists */ + +/* + * Define READ and WRITE Constants. + */ + +#define VPD_DEV_ID_GENESIS 0x4300 + +#define VPD_SIZE_YUKON 256 +#define VPD_SIZE_GENESIS 512 +#define VPD_SIZE 512 +#define VPD_READ 0x0000 +#define VPD_WRITE 0x8000 + +#define VPD_STOP(pAC,IoC) VPD_OUT16(pAC,IoC,PCI_VPD_ADR_REG,VPD_WRITE) + +#define VPD_GET_RES_LEN(p) ((unsigned int) \ + (* (SK_U8 *)&(p)[1]) |\ + ((* (SK_U8 *)&(p)[2]) << 8)) +#define VPD_GET_VPD_LEN(p) ((unsigned int)(* (SK_U8 *)&(p)[2])) +#define VPD_GET_VAL(p) ((char *)&(p)[3]) + +#define VPD_MAX_LEN 50 + +/* VPD status */ + /* bit 7..1 reserved */ +#define VPD_VALID (1<<0) /* VPD data buffer, vpd_free_ro, */ + /* and vpd_free_rw valid */ + +/* + * VPD structs + */ +typedef struct s_vpd_status { + unsigned short Align01; /* Alignment */ + unsigned short vpd_status; /* VPD status, description see above */ + int vpd_free_ro; /* unused bytes in read only area */ + int vpd_free_rw; /* bytes available in read/write area */ +} SK_VPD_STATUS; + +typedef struct s_vpd { + SK_VPD_STATUS v; /* VPD status structure */ + char vpd_buf[VPD_SIZE]; /* VPD buffer */ + int rom_size; /* VPD ROM Size from PCI_OUR_REG_2 */ + int vpd_size; /* saved VPD-size */ +} SK_VPD; + +typedef struct s_vpd_para { + unsigned int p_len; /* parameter length */ + char *p_val; /* points to the value */ +} SK_VPD_PARA; + +/* + * structure of Large Resource Type Identifiers + */ + +/* was removed because of alignment problems */ + +/* + * structure of VPD keywords + */ +typedef struct s_vpd_key { + char p_key[2]; /* 2 bytes ID string */ + unsigned char p_len; /* 1 byte length */ + char p_val; /* start of the value string */ +} SK_VPD_KEY; + + +/* + * System specific VPD macros + */ +#ifndef SKDIAG +#ifndef VPD_DO_IO +#define VPD_OUT8(pAC,IoC,Addr,Val) (void)SkPciWriteCfgByte(pAC,Addr,Val) +#define VPD_OUT16(pAC,IoC,Addr,Val) (void)SkPciWriteCfgWord(pAC,Addr,Val) +#define VPD_IN8(pAC,IoC,Addr,pVal) (void)SkPciReadCfgByte(pAC,Addr,pVal) +#define VPD_IN16(pAC,IoC,Addr,pVal) (void)SkPciReadCfgWord(pAC,Addr,pVal) +#define VPD_IN32(pAC,IoC,Addr,pVal) (void)SkPciReadCfgDWord(pAC,Addr,pVal) +#else /* VPD_DO_IO */ +#define VPD_OUT8(pAC,IoC,Addr,Val) SK_OUT8(IoC,PCI_C(Addr),Val) +#define VPD_OUT16(pAC,IoC,Addr,Val) SK_OUT16(IoC,PCI_C(Addr),Val) +#define VPD_IN8(pAC,IoC,Addr,pVal) SK_IN8(IoC,PCI_C(Addr),pVal) +#define VPD_IN16(pAC,IoC,Addr,pVal) SK_IN16(IoC,PCI_C(Addr),pVal) +#define VPD_IN32(pAC,IoC,Addr,pVal) SK_IN32(IoC,PCI_C(Addr),pVal) +#endif /* VPD_DO_IO */ +#else /* SKDIAG */ +#define VPD_OUT8(pAC,Ioc,Addr,Val) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciWriteCfgByte(pAC,Addr,Val); \ + else \ + SK_OUT8(pAC,PCI_C(Addr),Val); \ + } +#define VPD_OUT16(pAC,Ioc,Addr,Val) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciWriteCfgWord(pAC,Addr,Val); \ + else \ + SK_OUT16(pAC,PCI_C(Addr),Val); \ + } +#define VPD_IN8(pAC,Ioc,Addr,pVal) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciReadCfgByte(pAC,Addr,pVal); \ + else \ + SK_IN8(pAC,PCI_C(Addr),pVal); \ + } +#define VPD_IN16(pAC,Ioc,Addr,pVal) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciReadCfgWord(pAC,Addr,pVal); \ + else \ + SK_IN16(pAC,PCI_C(Addr),pVal); \ + } +#define VPD_IN32(pAC,Ioc,Addr,pVal) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciReadCfgDWord(pAC,Addr,pVal); \ + else \ + SK_IN32(pAC,PCI_C(Addr),pVal); \ + } +#endif /* nSKDIAG */ + +/* function prototypes ********************************************************/ + +#ifndef SK_KR_PROTO +#ifdef SKDIAG +extern SK_U32 VpdReadDWord( + SK_AC *pAC, + SK_IOC IoC, + int addr); +#endif /* SKDIAG */ + +extern SK_VPD_STATUS *VpdStat( + SK_AC *pAC, + SK_IOC IoC); + +extern int VpdKeys( + SK_AC *pAC, + SK_IOC IoC, + char *buf, + int *len, + int *elements); + +extern int VpdRead( + SK_AC *pAC, + SK_IOC IoC, + const char *key, + char *buf, + int *len); + +extern SK_BOOL VpdMayWrite( + char *key); + +extern int VpdWrite( + SK_AC *pAC, + SK_IOC IoC, + const char *key, + const char *buf); + +extern int VpdDelete( + SK_AC *pAC, + SK_IOC IoC, + char *key); + +extern int VpdUpdate( + SK_AC *pAC, + SK_IOC IoC); + +#ifdef SKDIAG +extern int VpdReadBlock( + SK_AC *pAC, + SK_IOC IoC, + char *buf, + int addr, + int len); + +extern int VpdWriteBlock( + SK_AC *pAC, + SK_IOC IoC, + char *buf, + int addr, + int len); +#endif /* SKDIAG */ +#else /* SK_KR_PROTO */ +extern SK_U32 VpdReadDWord(); +extern SK_VPD_STATUS *VpdStat(); +extern int VpdKeys(); +extern int VpdRead(); +extern SK_BOOL VpdMayWrite(); +extern int VpdWrite(); +extern int VpdDelete(); +extern int VpdUpdate(); +#endif /* SK_KR_PROTO */ + +#endif /* __INC_SKVPD_H_ */ diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h new file mode 100644 index 00000000000..7f8e6d0084c --- /dev/null +++ b/drivers/net/sk98lin/h/xmac_ii.h @@ -0,0 +1,1579 @@ +/****************************************************************************** + * + * Name: xmac_ii.h + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.52 $ + * Date: $Date: 2003/10/02 16:35:50 $ + * Purpose: Defines and Macros for Gigabit Ethernet Controller + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#ifndef __INC_XMAC_H +#define __INC_XMAC_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* defines ********************************************************************/ + +/* + * XMAC II registers + * + * The XMAC registers are 16 or 32 bits wide. + * The XMACs host processor interface is set to 16 bit mode, + * therefore ALL registers will be addressed with 16 bit accesses. + * + * The following macros are provided to access the XMAC registers + * XM_IN16(), XM_OUT16, XM_IN32(), XM_OUT32(), XM_INADR(), XM_OUTADR(), + * XM_INHASH(), and XM_OUTHASH(). + * The macros are defined in SkGeHw.h. + * + * Note: NA reg = Network Address e.g DA, SA etc. + * + */ +#define XM_MMU_CMD 0x0000 /* 16 bit r/w MMU Command Register */ + /* 0x0004: reserved */ +#define XM_POFF 0x0008 /* 32 bit r/w Packet Offset Register */ +#define XM_BURST 0x000c /* 32 bit r/w Burst Register for half duplex*/ +#define XM_1L_VLAN_TAG 0x0010 /* 16 bit r/w One Level VLAN Tag ID */ +#define XM_2L_VLAN_TAG 0x0014 /* 16 bit r/w Two Level VLAN Tag ID */ + /* 0x0018 - 0x001e: reserved */ +#define XM_TX_CMD 0x0020 /* 16 bit r/w Transmit Command Register */ +#define XM_TX_RT_LIM 0x0024 /* 16 bit r/w Transmit Retry Limit Register */ +#define XM_TX_STIME 0x0028 /* 16 bit r/w Transmit Slottime Register */ +#define XM_TX_IPG 0x002c /* 16 bit r/w Transmit Inter Packet Gap */ +#define XM_RX_CMD 0x0030 /* 16 bit r/w Receive Command Register */ +#define XM_PHY_ADDR 0x0034 /* 16 bit r/w PHY Address Register */ +#define XM_PHY_DATA 0x0038 /* 16 bit r/w PHY Data Register */ + /* 0x003c: reserved */ +#define XM_GP_PORT 0x0040 /* 32 bit r/w General Purpose Port Register */ +#define XM_IMSK 0x0044 /* 16 bit r/w Interrupt Mask Register */ +#define XM_ISRC 0x0048 /* 16 bit r/o Interrupt Status Register */ +#define XM_HW_CFG 0x004c /* 16 bit r/w Hardware Config Register */ + /* 0x0050 - 0x005e: reserved */ +#define XM_TX_LO_WM 0x0060 /* 16 bit r/w Tx FIFO Low Water Mark */ +#define XM_TX_HI_WM 0x0062 /* 16 bit r/w Tx FIFO High Water Mark */ +#define XM_TX_THR 0x0064 /* 16 bit r/w Tx Request Threshold */ +#define XM_HT_THR 0x0066 /* 16 bit r/w Host Request Threshold */ +#define XM_PAUSE_DA 0x0068 /* NA reg r/w Pause Destination Address */ + /* 0x006e: reserved */ +#define XM_CTL_PARA 0x0070 /* 32 bit r/w Control Parameter Register */ +#define XM_MAC_OPCODE 0x0074 /* 16 bit r/w Opcode for MAC control frames */ +#define XM_MAC_PTIME 0x0076 /* 16 bit r/w Pause time for MAC ctrl frames*/ +#define XM_TX_STAT 0x0078 /* 32 bit r/o Tx Status LIFO Register */ + + /* 0x0080 - 0x00fc: 16 NA reg r/w Exact Match Address Registers */ + /* use the XM_EXM() macro to address */ +#define XM_EXM_START 0x0080 /* r/w Start Address of the EXM Regs */ + + /* + * XM_EXM(Reg) + * + * returns the XMAC address offset of specified Exact Match Addr Reg + * + * para: Reg EXM register to addr (0 .. 15) + * + * usage: XM_INADDR(IoC, MAC_1, XM_EXM(i), &val[i]); + */ +#define XM_EXM(Reg) (XM_EXM_START + ((Reg) << 3)) + +#define XM_SRC_CHK 0x0100 /* NA reg r/w Source Check Address Register */ +#define XM_SA 0x0108 /* NA reg r/w Station Address Register */ +#define XM_HSM 0x0110 /* 64 bit r/w Hash Match Address Registers */ +#define XM_RX_LO_WM 0x0118 /* 16 bit r/w Receive Low Water Mark */ +#define XM_RX_HI_WM 0x011a /* 16 bit r/w Receive High Water Mark */ +#define XM_RX_THR 0x011c /* 32 bit r/w Receive Request Threshold */ +#define XM_DEV_ID 0x0120 /* 32 bit r/o Device ID Register */ +#define XM_MODE 0x0124 /* 32 bit r/w Mode Register */ +#define XM_LSA 0x0128 /* NA reg r/o Last Source Register */ + /* 0x012e: reserved */ +#define XM_TS_READ 0x0130 /* 32 bit r/o Time Stamp Read Register */ +#define XM_TS_LOAD 0x0134 /* 32 bit r/o Time Stamp Load Value */ + /* 0x0138 - 0x01fe: reserved */ +#define XM_STAT_CMD 0x0200 /* 16 bit r/w Statistics Command Register */ +#define XM_RX_CNT_EV 0x0204 /* 32 bit r/o Rx Counter Event Register */ +#define XM_TX_CNT_EV 0x0208 /* 32 bit r/o Tx Counter Event Register */ +#define XM_RX_EV_MSK 0x020c /* 32 bit r/w Rx Counter Event Mask */ +#define XM_TX_EV_MSK 0x0210 /* 32 bit r/w Tx Counter Event Mask */ + /* 0x0204 - 0x027e: reserved */ +#define XM_TXF_OK 0x0280 /* 32 bit r/o Frames Transmitted OK Conuter */ +#define XM_TXO_OK_HI 0x0284 /* 32 bit r/o Octets Transmitted OK High Cnt*/ +#define XM_TXO_OK_LO 0x0288 /* 32 bit r/o Octets Transmitted OK Low Cnt */ +#define XM_TXF_BC_OK 0x028c /* 32 bit r/o Broadcast Frames Xmitted OK */ +#define XM_TXF_MC_OK 0x0290 /* 32 bit r/o Multicast Frames Xmitted OK */ +#define XM_TXF_UC_OK 0x0294 /* 32 bit r/o Unicast Frames Xmitted OK */ +#define XM_TXF_LONG 0x0298 /* 32 bit r/o Tx Long Frame Counter */ +#define XM_TXE_BURST 0x029c /* 32 bit r/o Tx Burst Event Counter */ +#define XM_TXF_MPAUSE 0x02a0 /* 32 bit r/o Tx Pause MAC Ctrl Frame Cnt */ +#define XM_TXF_MCTRL 0x02a4 /* 32 bit r/o Tx MAC Ctrl Frame Counter */ +#define XM_TXF_SNG_COL 0x02a8 /* 32 bit r/o Tx Single Collision Counter */ +#define XM_TXF_MUL_COL 0x02ac /* 32 bit r/o Tx Multiple Collision Counter */ +#define XM_TXF_ABO_COL 0x02b0 /* 32 bit r/o Tx aborted due to Exces. Col. */ +#define XM_TXF_LAT_COL 0x02b4 /* 32 bit r/o Tx Late Collision Counter */ +#define XM_TXF_DEF 0x02b8 /* 32 bit r/o Tx Deferred Frame Counter */ +#define XM_TXF_EX_DEF 0x02bc /* 32 bit r/o Tx Excessive Deferall Counter */ +#define XM_TXE_FIFO_UR 0x02c0 /* 32 bit r/o Tx FIFO Underrun Event Cnt */ +#define XM_TXE_CS_ERR 0x02c4 /* 32 bit r/o Tx Carrier Sense Error Cnt */ +#define XM_TXP_UTIL 0x02c8 /* 32 bit r/o Tx Utilization in % */ + /* 0x02cc - 0x02ce: reserved */ +#define XM_TXF_64B 0x02d0 /* 32 bit r/o 64 Byte Tx Frame Counter */ +#define XM_TXF_127B 0x02d4 /* 32 bit r/o 65-127 Byte Tx Frame Counter */ +#define XM_TXF_255B 0x02d8 /* 32 bit r/o 128-255 Byte Tx Frame Counter */ +#define XM_TXF_511B 0x02dc /* 32 bit r/o 256-511 Byte Tx Frame Counter */ +#define XM_TXF_1023B 0x02e0 /* 32 bit r/o 512-1023 Byte Tx Frame Counter*/ +#define XM_TXF_MAX_SZ 0x02e4 /* 32 bit r/o 1024-MaxSize Byte Tx Frame Cnt*/ + /* 0x02e8 - 0x02fe: reserved */ +#define XM_RXF_OK 0x0300 /* 32 bit r/o Frames Received OK */ +#define XM_RXO_OK_HI 0x0304 /* 32 bit r/o Octets Received OK High Cnt */ +#define XM_RXO_OK_LO 0x0308 /* 32 bit r/o Octets Received OK Low Counter*/ +#define XM_RXF_BC_OK 0x030c /* 32 bit r/o Broadcast Frames Received OK */ +#define XM_RXF_MC_OK 0x0310 /* 32 bit r/o Multicast Frames Received OK */ +#define XM_RXF_UC_OK 0x0314 /* 32 bit r/o Unicast Frames Received OK */ +#define XM_RXF_MPAUSE 0x0318 /* 32 bit r/o Rx Pause MAC Ctrl Frame Cnt */ +#define XM_RXF_MCTRL 0x031c /* 32 bit r/o Rx MAC Ctrl Frame Counter */ +#define XM_RXF_INV_MP 0x0320 /* 32 bit r/o Rx invalid Pause Frame Cnt */ +#define XM_RXF_INV_MOC 0x0324 /* 32 bit r/o Rx Frames with inv. MAC Opcode*/ +#define XM_RXE_BURST 0x0328 /* 32 bit r/o Rx Burst Event Counter */ +#define XM_RXE_FMISS 0x032c /* 32 bit r/o Rx Missed Frames Event Cnt */ +#define XM_RXF_FRA_ERR 0x0330 /* 32 bit r/o Rx Framing Error Counter */ +#define XM_RXE_FIFO_OV 0x0334 /* 32 bit r/o Rx FIFO overflow Event Cnt */ +#define XM_RXF_JAB_PKT 0x0338 /* 32 bit r/o Rx Jabber Packet Frame Cnt */ +#define XM_RXE_CAR_ERR 0x033c /* 32 bit r/o Rx Carrier Event Error Cnt */ +#define XM_RXF_LEN_ERR 0x0340 /* 32 bit r/o Rx in Range Length Error */ +#define XM_RXE_SYM_ERR 0x0344 /* 32 bit r/o Rx Symbol Error Counter */ +#define XM_RXE_SHT_ERR 0x0348 /* 32 bit r/o Rx Short Event Error Cnt */ +#define XM_RXE_RUNT 0x034c /* 32 bit r/o Rx Runt Event Counter */ +#define XM_RXF_LNG_ERR 0x0350 /* 32 bit r/o Rx Frame too Long Error Cnt */ +#define XM_RXF_FCS_ERR 0x0354 /* 32 bit r/o Rx Frame Check Seq. Error Cnt */ + /* 0x0358 - 0x035a: reserved */ +#define XM_RXF_CEX_ERR 0x035c /* 32 bit r/o Rx Carrier Ext Error Frame Cnt*/ +#define XM_RXP_UTIL 0x0360 /* 32 bit r/o Rx Utilization in % */ + /* 0x0364 - 0x0366: reserved */ +#define XM_RXF_64B 0x0368 /* 32 bit r/o 64 Byte Rx Frame Counter */ +#define XM_RXF_127B 0x036c /* 32 bit r/o 65-127 Byte Rx Frame Counter */ +#define XM_RXF_255B 0x0370 /* 32 bit r/o 128-255 Byte Rx Frame Counter */ +#define XM_RXF_511B 0x0374 /* 32 bit r/o 256-511 Byte Rx Frame Counter */ +#define XM_RXF_1023B 0x0378 /* 32 bit r/o 512-1023 Byte Rx Frame Counter*/ +#define XM_RXF_MAX_SZ 0x037c /* 32 bit r/o 1024-MaxSize Byte Rx Frame Cnt*/ + /* 0x02e8 - 0x02fe: reserved */ + + +/*----------------------------------------------------------------------------*/ +/* + * XMAC Bit Definitions + * + * If the bit access behaviour differs from the register access behaviour + * (r/w, r/o) this is documented after the bit number. + * The following bit access behaviours are used: + * (sc) self clearing + * (ro) read only + */ + +/* XM_MMU_CMD 16 bit r/w MMU Command Register */ + /* Bit 15..13: reserved */ +#define XM_MMU_PHY_RDY (1<<12) /* Bit 12: PHY Read Ready */ +#define XM_MMU_PHY_BUSY (1<<11) /* Bit 11: PHY Busy */ +#define XM_MMU_IGN_PF (1<<10) /* Bit 10: Ignore Pause Frame */ +#define XM_MMU_MAC_LB (1<<9) /* Bit 9: Enable MAC Loopback */ + /* Bit 8: reserved */ +#define XM_MMU_FRC_COL (1<<7) /* Bit 7: Force Collision */ +#define XM_MMU_SIM_COL (1<<6) /* Bit 6: Simulate Collision */ +#define XM_MMU_NO_PRE (1<<5) /* Bit 5: No MDIO Preamble */ +#define XM_MMU_GMII_FD (1<<4) /* Bit 4: GMII uses Full Duplex */ +#define XM_MMU_RAT_CTRL (1<<3) /* Bit 3: Enable Rate Control */ +#define XM_MMU_GMII_LOOP (1<<2) /* Bit 2: PHY is in Loopback Mode */ +#define XM_MMU_ENA_RX (1<<1) /* Bit 1: Enable Receiver */ +#define XM_MMU_ENA_TX (1<<0) /* Bit 0: Enable Transmitter */ + + +/* XM_TX_CMD 16 bit r/w Transmit Command Register */ + /* Bit 15..7: reserved */ +#define XM_TX_BK2BK (1<<6) /* Bit 6: Ignor Carrier Sense (Tx Bk2Bk)*/ +#define XM_TX_ENC_BYP (1<<5) /* Bit 5: Set Encoder in Bypass Mode */ +#define XM_TX_SAM_LINE (1<<4) /* Bit 4: (sc) Start utilization calculation */ +#define XM_TX_NO_GIG_MD (1<<3) /* Bit 3: Disable Carrier Extension */ +#define XM_TX_NO_PRE (1<<2) /* Bit 2: Disable Preamble Generation */ +#define XM_TX_NO_CRC (1<<1) /* Bit 1: Disable CRC Generation */ +#define XM_TX_AUTO_PAD (1<<0) /* Bit 0: Enable Automatic Padding */ + + +/* XM_TX_RT_LIM 16 bit r/w Transmit Retry Limit Register */ + /* Bit 15..5: reserved */ +#define XM_RT_LIM_MSK 0x1f /* Bit 4..0: Tx Retry Limit */ + + +/* XM_TX_STIME 16 bit r/w Transmit Slottime Register */ + /* Bit 15..7: reserved */ +#define XM_STIME_MSK 0x7f /* Bit 6..0: Tx Slottime bits */ + + +/* XM_TX_IPG 16 bit r/w Transmit Inter Packet Gap */ + /* Bit 15..8: reserved */ +#define XM_IPG_MSK 0xff /* Bit 7..0: IPG value bits */ + + +/* XM_RX_CMD 16 bit r/w Receive Command Register */ + /* Bit 15..9: reserved */ +#define XM_RX_LENERR_OK (1<<8) /* Bit 8 don't set Rx Err bit for */ + /* inrange error packets */ +#define XM_RX_BIG_PK_OK (1<<7) /* Bit 7 don't set Rx Err bit for */ + /* jumbo packets */ +#define XM_RX_IPG_CAP (1<<6) /* Bit 6 repl. type field with IPG */ +#define XM_RX_TP_MD (1<<5) /* Bit 5: Enable transparent Mode */ +#define XM_RX_STRIP_FCS (1<<4) /* Bit 4: Enable FCS Stripping */ +#define XM_RX_SELF_RX (1<<3) /* Bit 3: Enable Rx of own packets */ +#define XM_RX_SAM_LINE (1<<2) /* Bit 2: (sc) Start utilization calculation */ +#define XM_RX_STRIP_PAD (1<<1) /* Bit 1: Strip pad bytes of Rx frames */ +#define XM_RX_DIS_CEXT (1<<0) /* Bit 0: Disable carrier ext. check */ + + +/* XM_PHY_ADDR 16 bit r/w PHY Address Register */ + /* Bit 15..5: reserved */ +#define XM_PHY_ADDR_SZ 0x1f /* Bit 4..0: PHY Address bits */ + + +/* XM_GP_PORT 32 bit r/w General Purpose Port Register */ + /* Bit 31..7: reserved */ +#define XM_GP_ANIP (1L<<6) /* Bit 6: (ro) Auto-Neg. in progress */ +#define XM_GP_FRC_INT (1L<<5) /* Bit 5: (sc) Force Interrupt */ + /* Bit 4: reserved */ +#define XM_GP_RES_MAC (1L<<3) /* Bit 3: (sc) Reset MAC and FIFOs */ +#define XM_GP_RES_STAT (1L<<2) /* Bit 2: (sc) Reset the statistics module */ + /* Bit 1: reserved */ +#define XM_GP_INP_ASS (1L<<0) /* Bit 0: (ro) GP Input Pin asserted */ + + +/* XM_IMSK 16 bit r/w Interrupt Mask Register */ +/* XM_ISRC 16 bit r/o Interrupt Status Register */ + /* Bit 15: reserved */ +#define XM_IS_LNK_AE (1<<14) /* Bit 14: Link Asynchronous Event */ +#define XM_IS_TX_ABORT (1<<13) /* Bit 13: Transmit Abort, late Col. etc */ +#define XM_IS_FRC_INT (1<<12) /* Bit 12: Force INT bit set in GP */ +#define XM_IS_INP_ASS (1<<11) /* Bit 11: Input Asserted, GP bit 0 set */ +#define XM_IS_LIPA_RC (1<<10) /* Bit 10: Link Partner requests config */ +#define XM_IS_RX_PAGE (1<<9) /* Bit 9: Page Received */ +#define XM_IS_TX_PAGE (1<<8) /* Bit 8: Next Page Loaded for Transmit */ +#define XM_IS_AND (1<<7) /* Bit 7: Auto-Negotiation Done */ +#define XM_IS_TSC_OV (1<<6) /* Bit 6: Time Stamp Counter Overflow */ +#define XM_IS_RXC_OV (1<<5) /* Bit 5: Rx Counter Event Overflow */ +#define XM_IS_TXC_OV (1<<4) /* Bit 4: Tx Counter Event Overflow */ +#define XM_IS_RXF_OV (1<<3) /* Bit 3: Receive FIFO Overflow */ +#define XM_IS_TXF_UR (1<<2) /* Bit 2: Transmit FIFO Underrun */ +#define XM_IS_TX_COMP (1<<1) /* Bit 1: Frame Tx Complete */ +#define XM_IS_RX_COMP (1<<0) /* Bit 0: Frame Rx Complete */ + +#define XM_DEF_MSK (~(XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE |\ + XM_IS_AND | XM_IS_RXC_OV | XM_IS_TXC_OV | XM_IS_TXF_UR)) + + +/* XM_HW_CFG 16 bit r/w Hardware Config Register */ + /* Bit 15.. 4: reserved */ +#define XM_HW_GEN_EOP (1<<3) /* Bit 3: generate End of Packet pulse */ +#define XM_HW_COM4SIG (1<<2) /* Bit 2: use Comma Detect for Sig. Det.*/ + /* Bit 1: reserved */ +#define XM_HW_GMII_MD (1<<0) /* Bit 0: GMII Interface selected */ + + +/* XM_TX_LO_WM 16 bit r/w Tx FIFO Low Water Mark */ +/* XM_TX_HI_WM 16 bit r/w Tx FIFO High Water Mark */ + /* Bit 15..10 reserved */ +#define XM_TX_WM_MSK 0x01ff /* Bit 9.. 0 Tx FIFO Watermark bits */ + +/* XM_TX_THR 16 bit r/w Tx Request Threshold */ +/* XM_HT_THR 16 bit r/w Host Request Threshold */ +/* XM_RX_THR 16 bit r/w Rx Request Threshold */ + /* Bit 15..11 reserved */ +#define XM_THR_MSK 0x03ff /* Bit 10.. 0 Rx/Tx Request Threshold bits */ + + +/* XM_TX_STAT 32 bit r/o Tx Status LIFO Register */ +#define XM_ST_VALID (1UL<<31) /* Bit 31: Status Valid */ +#define XM_ST_BYTE_CNT (0x3fffL<<17) /* Bit 30..17: Tx frame Length */ +#define XM_ST_RETRY_CNT (0x1fL<<12) /* Bit 16..12: Retry Count */ +#define XM_ST_EX_COL (1L<<11) /* Bit 11: Excessive Collisions */ +#define XM_ST_EX_DEF (1L<<10) /* Bit 10: Excessive Deferral */ +#define XM_ST_BURST (1L<<9) /* Bit 9: p. xmitted in burst md*/ +#define XM_ST_DEFER (1L<<8) /* Bit 8: packet was defered */ +#define XM_ST_BC (1L<<7) /* Bit 7: Broadcast packet */ +#define XM_ST_MC (1L<<6) /* Bit 6: Multicast packet */ +#define XM_ST_UC (1L<<5) /* Bit 5: Unicast packet */ +#define XM_ST_TX_UR (1L<<4) /* Bit 4: FIFO Underrun occured */ +#define XM_ST_CS_ERR (1L<<3) /* Bit 3: Carrier Sense Error */ +#define XM_ST_LAT_COL (1L<<2) /* Bit 2: Late Collision Error */ +#define XM_ST_MUL_COL (1L<<1) /* Bit 1: Multiple Collisions */ +#define XM_ST_SGN_COL (1L<<0) /* Bit 0: Single Collision */ + +/* XM_RX_LO_WM 16 bit r/w Receive Low Water Mark */ +/* XM_RX_HI_WM 16 bit r/w Receive High Water Mark */ + /* Bit 15..11: reserved */ +#define XM_RX_WM_MSK 0x03ff /* Bit 11.. 0: Rx FIFO Watermark bits */ + + +/* XM_DEV_ID 32 bit r/o Device ID Register */ +#define XM_DEV_OUI (0x00ffffffUL<<8) /* Bit 31..8: Device OUI */ +#define XM_DEV_REV (0x07L << 5) /* Bit 7..5: Chip Rev Num */ + + +/* XM_MODE 32 bit r/w Mode Register */ + /* Bit 31..27: reserved */ +#define XM_MD_ENA_REJ (1L<<26) /* Bit 26: Enable Frame Reject */ +#define XM_MD_SPOE_E (1L<<25) /* Bit 25: Send Pause on Edge */ + /* extern generated */ +#define XM_MD_TX_REP (1L<<24) /* Bit 24: Transmit Repeater Mode */ +#define XM_MD_SPOFF_I (1L<<23) /* Bit 23: Send Pause on FIFO full */ + /* intern generated */ +#define XM_MD_LE_STW (1L<<22) /* Bit 22: Rx Stat Word in Little Endian */ +#define XM_MD_TX_CONT (1L<<21) /* Bit 21: Send Continuous */ +#define XM_MD_TX_PAUSE (1L<<20) /* Bit 20: (sc) Send Pause Frame */ +#define XM_MD_ATS (1L<<19) /* Bit 19: Append Time Stamp */ +#define XM_MD_SPOL_I (1L<<18) /* Bit 18: Send Pause on Low */ + /* intern generated */ +#define XM_MD_SPOH_I (1L<<17) /* Bit 17: Send Pause on High */ + /* intern generated */ +#define XM_MD_CAP (1L<<16) /* Bit 16: Check Address Pair */ +#define XM_MD_ENA_HASH (1L<<15) /* Bit 15: Enable Hashing */ +#define XM_MD_CSA (1L<<14) /* Bit 14: Check Station Address */ +#define XM_MD_CAA (1L<<13) /* Bit 13: Check Address Array */ +#define XM_MD_RX_MCTRL (1L<<12) /* Bit 12: Rx MAC Control Frame */ +#define XM_MD_RX_RUNT (1L<<11) /* Bit 11: Rx Runt Frames */ +#define XM_MD_RX_IRLE (1L<<10) /* Bit 10: Rx in Range Len Err Frame */ +#define XM_MD_RX_LONG (1L<<9) /* Bit 9: Rx Long Frame */ +#define XM_MD_RX_CRCE (1L<<8) /* Bit 8: Rx CRC Error Frame */ +#define XM_MD_RX_ERR (1L<<7) /* Bit 7: Rx Error Frame */ +#define XM_MD_DIS_UC (1L<<6) /* Bit 6: Disable Rx Unicast */ +#define XM_MD_DIS_MC (1L<<5) /* Bit 5: Disable Rx Multicast */ +#define XM_MD_DIS_BC (1L<<4) /* Bit 4: Disable Rx Broadcast */ +#define XM_MD_ENA_PROM (1L<<3) /* Bit 3: Enable Promiscuous */ +#define XM_MD_ENA_BE (1L<<2) /* Bit 2: Enable Big Endian */ +#define XM_MD_FTF (1L<<1) /* Bit 1: (sc) Flush Tx FIFO */ +#define XM_MD_FRF (1L<<0) /* Bit 0: (sc) Flush Rx FIFO */ + +#define XM_PAUSE_MODE (XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I) +#define XM_DEF_MODE (XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\ + XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA) + +/* XM_STAT_CMD 16 bit r/w Statistics Command Register */ + /* Bit 16..6: reserved */ +#define XM_SC_SNP_RXC (1<<5) /* Bit 5: (sc) Snap Rx Counters */ +#define XM_SC_SNP_TXC (1<<4) /* Bit 4: (sc) Snap Tx Counters */ +#define XM_SC_CP_RXC (1<<3) /* Bit 3: Copy Rx Counters Continuously */ +#define XM_SC_CP_TXC (1<<2) /* Bit 2: Copy Tx Counters Continuously */ +#define XM_SC_CLR_RXC (1<<1) /* Bit 1: (sc) Clear Rx Counters */ +#define XM_SC_CLR_TXC (1<<0) /* Bit 0: (sc) Clear Tx Counters */ + + +/* XM_RX_CNT_EV 32 bit r/o Rx Counter Event Register */ +/* XM_RX_EV_MSK 32 bit r/w Rx Counter Event Mask */ +#define XMR_MAX_SZ_OV (1UL<<31) /* Bit 31: 1024-MaxSize Rx Cnt Ov*/ +#define XMR_1023B_OV (1L<<30) /* Bit 30: 512-1023Byte Rx Cnt Ov*/ +#define XMR_511B_OV (1L<<29) /* Bit 29: 256-511 Byte Rx Cnt Ov*/ +#define XMR_255B_OV (1L<<28) /* Bit 28: 128-255 Byte Rx Cnt Ov*/ +#define XMR_127B_OV (1L<<27) /* Bit 27: 65-127 Byte Rx Cnt Ov */ +#define XMR_64B_OV (1L<<26) /* Bit 26: 64 Byte Rx Cnt Ov */ +#define XMR_UTIL_OV (1L<<25) /* Bit 25: Rx Util Cnt Overflow */ +#define XMR_UTIL_UR (1L<<24) /* Bit 24: Rx Util Cnt Underrun */ +#define XMR_CEX_ERR_OV (1L<<23) /* Bit 23: CEXT Err Cnt Ov */ + /* Bit 22: reserved */ +#define XMR_FCS_ERR_OV (1L<<21) /* Bit 21: Rx FCS Error Cnt Ov */ +#define XMR_LNG_ERR_OV (1L<<20) /* Bit 20: Rx too Long Err Cnt Ov*/ +#define XMR_RUNT_OV (1L<<19) /* Bit 19: Runt Event Cnt Ov */ +#define XMR_SHT_ERR_OV (1L<<18) /* Bit 18: Rx Short Ev Err Cnt Ov*/ +#define XMR_SYM_ERR_OV (1L<<17) /* Bit 17: Rx Sym Err Cnt Ov */ + /* Bit 16: reserved */ +#define XMR_CAR_ERR_OV (1L<<15) /* Bit 15: Rx Carr Ev Err Cnt Ov */ +#define XMR_JAB_PKT_OV (1L<<14) /* Bit 14: Rx Jabb Packet Cnt Ov */ +#define XMR_FIFO_OV (1L<<13) /* Bit 13: Rx FIFO Ov Ev Cnt Ov */ +#define XMR_FRA_ERR_OV (1L<<12) /* Bit 12: Rx Framing Err Cnt Ov */ +#define XMR_FMISS_OV (1L<<11) /* Bit 11: Rx Missed Ev Cnt Ov */ +#define XMR_BURST (1L<<10) /* Bit 10: Rx Burst Event Cnt Ov */ +#define XMR_INV_MOC (1L<<9) /* Bit 9: Rx with inv. MAC OC Ov*/ +#define XMR_INV_MP (1L<<8) /* Bit 8: Rx inv Pause Frame Ov */ +#define XMR_MCTRL_OV (1L<<7) /* Bit 7: Rx MAC Ctrl-F Cnt Ov */ +#define XMR_MPAUSE_OV (1L<<6) /* Bit 6: Rx Pause MAC Ctrl-F Ov*/ +#define XMR_UC_OK_OV (1L<<5) /* Bit 5: Rx Unicast Frame CntOv*/ +#define XMR_MC_OK_OV (1L<<4) /* Bit 4: Rx Multicast Cnt Ov */ +#define XMR_BC_OK_OV (1L<<3) /* Bit 3: Rx Broadcast Cnt Ov */ +#define XMR_OK_LO_OV (1L<<2) /* Bit 2: Octets Rx OK Low CntOv*/ +#define XMR_OK_HI_OV (1L<<1) /* Bit 1: Octets Rx OK Hi Cnt Ov*/ +#define XMR_OK_OV (1L<<0) /* Bit 0: Frames Received Ok Ov */ + +#define XMR_DEF_MSK (XMR_OK_LO_OV | XMR_OK_HI_OV) + +/* XM_TX_CNT_EV 32 bit r/o Tx Counter Event Register */ +/* XM_TX_EV_MSK 32 bit r/w Tx Counter Event Mask */ + /* Bit 31..26: reserved */ +#define XMT_MAX_SZ_OV (1L<<25) /* Bit 25: 1024-MaxSize Tx Cnt Ov*/ +#define XMT_1023B_OV (1L<<24) /* Bit 24: 512-1023Byte Tx Cnt Ov*/ +#define XMT_511B_OV (1L<<23) /* Bit 23: 256-511 Byte Tx Cnt Ov*/ +#define XMT_255B_OV (1L<<22) /* Bit 22: 128-255 Byte Tx Cnt Ov*/ +#define XMT_127B_OV (1L<<21) /* Bit 21: 65-127 Byte Tx Cnt Ov */ +#define XMT_64B_OV (1L<<20) /* Bit 20: 64 Byte Tx Cnt Ov */ +#define XMT_UTIL_OV (1L<<19) /* Bit 19: Tx Util Cnt Overflow */ +#define XMT_UTIL_UR (1L<<18) /* Bit 18: Tx Util Cnt Underrun */ +#define XMT_CS_ERR_OV (1L<<17) /* Bit 17: Tx Carr Sen Err Cnt Ov*/ +#define XMT_FIFO_UR_OV (1L<<16) /* Bit 16: Tx FIFO Ur Ev Cnt Ov */ +#define XMT_EX_DEF_OV (1L<<15) /* Bit 15: Tx Ex Deferall Cnt Ov */ +#define XMT_DEF (1L<<14) /* Bit 14: Tx Deferred Cnt Ov */ +#define XMT_LAT_COL_OV (1L<<13) /* Bit 13: Tx Late Col Cnt Ov */ +#define XMT_ABO_COL_OV (1L<<12) /* Bit 12: Tx abo dueto Ex Col Ov*/ +#define XMT_MUL_COL_OV (1L<<11) /* Bit 11: Tx Mult Col Cnt Ov */ +#define XMT_SNG_COL (1L<<10) /* Bit 10: Tx Single Col Cnt Ov */ +#define XMT_MCTRL_OV (1L<<9) /* Bit 9: Tx MAC Ctrl Counter Ov*/ +#define XMT_MPAUSE (1L<<8) /* Bit 8: Tx Pause MAC Ctrl-F Ov*/ +#define XMT_BURST (1L<<7) /* Bit 7: Tx Burst Event Cnt Ov */ +#define XMT_LONG (1L<<6) /* Bit 6: Tx Long Frame Cnt Ov */ +#define XMT_UC_OK_OV (1L<<5) /* Bit 5: Tx Unicast Cnt Ov */ +#define XMT_MC_OK_OV (1L<<4) /* Bit 4: Tx Multicast Cnt Ov */ +#define XMT_BC_OK_OV (1L<<3) /* Bit 3: Tx Broadcast Cnt Ov */ +#define XMT_OK_LO_OV (1L<<2) /* Bit 2: Octets Tx OK Low CntOv*/ +#define XMT_OK_HI_OV (1L<<1) /* Bit 1: Octets Tx OK Hi Cnt Ov*/ +#define XMT_OK_OV (1L<<0) /* Bit 0: Frames Tx Ok Ov */ + +#define XMT_DEF_MSK (XMT_OK_LO_OV | XMT_OK_HI_OV) + +/* + * Receive Frame Status Encoding + */ +#define XMR_FS_LEN (0x3fffUL<<18) /* Bit 31..18: Rx Frame Length */ +#define XMR_FS_2L_VLAN (1L<<17) /* Bit 17: tagged wh 2Lev VLAN ID*/ +#define XMR_FS_1L_VLAN (1L<<16) /* Bit 16: tagged wh 1Lev VLAN ID*/ +#define XMR_FS_BC (1L<<15) /* Bit 15: Broadcast Frame */ +#define XMR_FS_MC (1L<<14) /* Bit 14: Multicast Frame */ +#define XMR_FS_UC (1L<<13) /* Bit 13: Unicast Frame */ + /* Bit 12: reserved */ +#define XMR_FS_BURST (1L<<11) /* Bit 11: Burst Mode */ +#define XMR_FS_CEX_ERR (1L<<10) /* Bit 10: Carrier Ext. Error */ +#define XMR_FS_802_3 (1L<<9) /* Bit 9: 802.3 Frame */ +#define XMR_FS_COL_ERR (1L<<8) /* Bit 8: Collision Error */ +#define XMR_FS_CAR_ERR (1L<<7) /* Bit 7: Carrier Event Error */ +#define XMR_FS_LEN_ERR (1L<<6) /* Bit 6: In-Range Length Error */ +#define XMR_FS_FRA_ERR (1L<<5) /* Bit 5: Framing Error */ +#define XMR_FS_RUNT (1L<<4) /* Bit 4: Runt Frame */ +#define XMR_FS_LNG_ERR (1L<<3) /* Bit 3: Giant (Jumbo) Frame */ +#define XMR_FS_FCS_ERR (1L<<2) /* Bit 2: Frame Check Sequ Err */ +#define XMR_FS_ERR (1L<<1) /* Bit 1: Frame Error */ +#define XMR_FS_MCTRL (1L<<0) /* Bit 0: MAC Control Packet */ + +/* + * XMR_FS_ERR will be set if + * XMR_FS_FCS_ERR, XMR_FS_LNG_ERR, XMR_FS_RUNT, + * XMR_FS_FRA_ERR, XMR_FS_LEN_ERR, or XMR_FS_CEX_ERR + * is set. XMR_FS_LNG_ERR and XMR_FS_LEN_ERR will issue + * XMR_FS_ERR unless the corresponding bit in the Receive Command + * Register is set. + */ +#define XMR_FS_ANY_ERR XMR_FS_ERR + +/*----------------------------------------------------------------------------*/ +/* + * XMAC-PHY Registers, indirect addressed over the XMAC + */ +#define PHY_XMAC_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_XMAC_STAT 0x01 /* 16 bit r/w PHY Status Register */ +#define PHY_XMAC_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_XMAC_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_XMAC_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_XMAC_AUNE_LP 0x05 /* 16 bit r/o Link Partner Abi Reg */ +#define PHY_XMAC_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_XMAC_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_XMAC_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */ + /* 0x09 - 0x0e: reserved */ +#define PHY_XMAC_EXT_STAT 0x0f /* 16 bit r/o Ext Status Register */ +#define PHY_XMAC_RES_ABI 0x10 /* 16 bit r/o PHY Resolved Ability */ + +/*----------------------------------------------------------------------------*/ +/* + * Broadcom-PHY Registers, indirect addressed over XMAC + */ +#define PHY_BCOM_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_BCOM_STAT 0x01 /* 16 bit r/o PHY Status Register */ +#define PHY_BCOM_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_BCOM_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_BCOM_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_BCOM_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */ +#define PHY_BCOM_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_BCOM_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_BCOM_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */ + /* Broadcom-specific registers */ +#define PHY_BCOM_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Ctrl Reg */ +#define PHY_BCOM_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ + /* 0x0b - 0x0e: reserved */ +#define PHY_BCOM_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */ +#define PHY_BCOM_P_EXT_CTRL 0x10 /* 16 bit r/w PHY Extended Ctrl Reg */ +#define PHY_BCOM_P_EXT_STAT 0x11 /* 16 bit r/o PHY Extended Stat Reg */ +#define PHY_BCOM_RE_CTR 0x12 /* 16 bit r/w Receive Error Counter */ +#define PHY_BCOM_FC_CTR 0x13 /* 16 bit r/w False Carrier Sense Cnt */ +#define PHY_BCOM_RNO_CTR 0x14 /* 16 bit r/w Receiver NOT_OK Cnt */ + /* 0x15 - 0x17: reserved */ +#define PHY_BCOM_AUX_CTRL 0x18 /* 16 bit r/w Auxiliary Control Reg */ +#define PHY_BCOM_AUX_STAT 0x19 /* 16 bit r/o Auxiliary Stat Summary */ +#define PHY_BCOM_INT_STAT 0x1a /* 16 bit r/o Interrupt Status Reg */ +#define PHY_BCOM_INT_MASK 0x1b /* 16 bit r/w Interrupt Mask Reg */ + /* 0x1c: reserved */ + /* 0x1d - 0x1f: test registers */ + +/*----------------------------------------------------------------------------*/ +/* + * Marvel-PHY Registers, indirect addressed over GMAC + */ +#define PHY_MARV_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_MARV_STAT 0x01 /* 16 bit r/o PHY Status Register */ +#define PHY_MARV_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_MARV_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_MARV_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_MARV_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */ +#define PHY_MARV_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_MARV_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_MARV_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */ + /* Marvel-specific registers */ +#define PHY_MARV_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Ctrl Reg */ +#define PHY_MARV_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ + /* 0x0b - 0x0e: reserved */ +#define PHY_MARV_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */ +#define PHY_MARV_PHY_CTRL 0x10 /* 16 bit r/w PHY Specific Ctrl Reg */ +#define PHY_MARV_PHY_STAT 0x11 /* 16 bit r/o PHY Specific Stat Reg */ +#define PHY_MARV_INT_MASK 0x12 /* 16 bit r/w Interrupt Mask Reg */ +#define PHY_MARV_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */ +#define PHY_MARV_EXT_CTRL 0x14 /* 16 bit r/w Ext. PHY Specific Ctrl */ +#define PHY_MARV_RXE_CNT 0x15 /* 16 bit r/w Receive Error Counter */ +#define PHY_MARV_EXT_ADR 0x16 /* 16 bit r/w Ext. Ad. for Cable Diag. */ + /* 0x17: reserved */ +#define PHY_MARV_LED_CTRL 0x18 /* 16 bit r/w LED Control Reg */ +#define PHY_MARV_LED_OVER 0x19 /* 16 bit r/w Manual LED Override Reg */ +#define PHY_MARV_EXT_CTRL_2 0x1a /* 16 bit r/w Ext. PHY Specific Ctrl 2 */ +#define PHY_MARV_EXT_P_STAT 0x1b /* 16 bit r/w Ext. PHY Spec. Stat Reg */ +#define PHY_MARV_CABLE_DIAG 0x1c /* 16 bit r/o Cable Diagnostic Reg */ + /* 0x1d - 0x1f: reserved */ + +/*----------------------------------------------------------------------------*/ +/* + * Level One-PHY Registers, indirect addressed over XMAC + */ +#define PHY_LONE_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_LONE_STAT 0x01 /* 16 bit r/o PHY Status Register */ +#define PHY_LONE_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_LONE_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_LONE_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_LONE_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */ +#define PHY_LONE_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_LONE_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_LONE_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner */ + /* Level One-specific registers */ +#define PHY_LONE_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg*/ +#define PHY_LONE_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ + /* 0x0b -0x0e: reserved */ +#define PHY_LONE_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */ +#define PHY_LONE_PORT_CFG 0x10 /* 16 bit r/w Port Configuration Reg*/ +#define PHY_LONE_Q_STAT 0x11 /* 16 bit r/o Quick Status Reg */ +#define PHY_LONE_INT_ENAB 0x12 /* 16 bit r/w Interrupt Enable Reg */ +#define PHY_LONE_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */ +#define PHY_LONE_LED_CFG 0x14 /* 16 bit r/w LED Configuration Reg */ +#define PHY_LONE_PORT_CTRL 0x15 /* 16 bit r/w Port Control Reg */ +#define PHY_LONE_CIM 0x16 /* 16 bit r/o CIM Reg */ + /* 0x17 -0x1c: reserved */ + +/*----------------------------------------------------------------------------*/ +/* + * National-PHY Registers, indirect addressed over XMAC + */ +#define PHY_NAT_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_NAT_STAT 0x01 /* 16 bit r/w PHY Status Register */ +#define PHY_NAT_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_NAT_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_NAT_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_NAT_AUNE_LP 0x05 /* 16 bit r/o Link Partner Ability Reg */ +#define PHY_NAT_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_NAT_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_NAT_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner Reg */ + /* National-specific registers */ +#define PHY_NAT_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg */ +#define PHY_NAT_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ + /* 0x0b -0x0e: reserved */ +#define PHY_NAT_EXT_STAT 0x0f /* 16 bit r/o Extended Status Register */ +#define PHY_NAT_EXT_CTRL1 0x10 /* 16 bit r/o Extended Control Reg1 */ +#define PHY_NAT_Q_STAT1 0x11 /* 16 bit r/o Quick Status Reg1 */ +#define PHY_NAT_10B_OP 0x12 /* 16 bit r/o 10Base-T Operations Reg */ +#define PHY_NAT_EXT_CTRL2 0x13 /* 16 bit r/o Extended Control Reg1 */ +#define PHY_NAT_Q_STAT2 0x14 /* 16 bit r/o Quick Status Reg2 */ + /* 0x15 -0x18: reserved */ +#define PHY_NAT_PHY_ADDR 0x19 /* 16 bit r/o PHY Address Register */ + + +/*----------------------------------------------------------------------------*/ + +/* + * PHY bit definitions + * Bits defined as PHY_X_..., PHY_B_..., PHY_L_... or PHY_N_... are + * XMAC/Broadcom/LevelOne/National/Marvell-specific. + * All other are general. + */ + +/***** PHY_XMAC_CTRL 16 bit r/w PHY Control Register *****/ +/***** PHY_BCOM_CTRL 16 bit r/w PHY Control Register *****/ +/***** PHY_MARV_CTRL 16 bit r/w PHY Status Register *****/ +/***** PHY_LONE_CTRL 16 bit r/w PHY Control Register *****/ +#define PHY_CT_RESET (1<<15) /* Bit 15: (sc) clear all PHY related regs */ +#define PHY_CT_LOOP (1<<14) /* Bit 14: enable Loopback over PHY */ +#define PHY_CT_SPS_LSB (1<<13) /* Bit 13: (BC,L1) Speed select, lower bit */ +#define PHY_CT_ANE (1<<12) /* Bit 12: Auto-Negotiation Enabled */ +#define PHY_CT_PDOWN (1<<11) /* Bit 11: (BC,L1) Power Down Mode */ +#define PHY_CT_ISOL (1<<10) /* Bit 10: (BC,L1) Isolate Mode */ +#define PHY_CT_RE_CFG (1<<9) /* Bit 9: (sc) Restart Auto-Negotiation */ +#define PHY_CT_DUP_MD (1<<8) /* Bit 8: Duplex Mode */ +#define PHY_CT_COL_TST (1<<7) /* Bit 7: (BC,L1) Collision Test enabled */ +#define PHY_CT_SPS_MSB (1<<6) /* Bit 6: (BC,L1) Speed select, upper bit */ + /* Bit 5..0: reserved */ + +#define PHY_CT_SP1000 PHY_CT_SPS_MSB /* enable speed of 1000 Mbps */ +#define PHY_CT_SP100 PHY_CT_SPS_LSB /* enable speed of 100 Mbps */ +#define PHY_CT_SP10 (0) /* enable speed of 10 Mbps */ + + +/***** PHY_XMAC_STAT 16 bit r/w PHY Status Register *****/ +/***** PHY_BCOM_STAT 16 bit r/w PHY Status Register *****/ +/***** PHY_MARV_STAT 16 bit r/w PHY Status Register *****/ +/***** PHY_LONE_STAT 16 bit r/w PHY Status Register *****/ + /* Bit 15..9: reserved */ + /* (BC/L1) 100/10 Mbps cap bits ignored*/ +#define PHY_ST_EXT_ST (1<<8) /* Bit 8: Extended Status Present */ + /* Bit 7: reserved */ +#define PHY_ST_PRE_SUP (1<<6) /* Bit 6: (BC/L1) preamble suppression */ +#define PHY_ST_AN_OVER (1<<5) /* Bit 5: Auto-Negotiation Over */ +#define PHY_ST_REM_FLT (1<<4) /* Bit 4: Remote Fault Condition Occured */ +#define PHY_ST_AN_CAP (1<<3) /* Bit 3: Auto-Negotiation Capability */ +#define PHY_ST_LSYNC (1<<2) /* Bit 2: Link Synchronized */ +#define PHY_ST_JAB_DET (1<<1) /* Bit 1: (BC/L1) Jabber Detected */ +#define PHY_ST_EXT_REG (1<<0) /* Bit 0: Extended Register available */ + + +/***** PHY_XMAC_ID1 16 bit r/o PHY ID1 Register */ +/***** PHY_BCOM_ID1 16 bit r/o PHY ID1 Register */ +/***** PHY_MARV_ID1 16 bit r/o PHY ID1 Register */ +/***** PHY_LONE_ID1 16 bit r/o PHY ID1 Register */ +#define PHY_I1_OUI_MSK (0x3f<<10) /* Bit 15..10: Organization Unique ID */ +#define PHY_I1_MOD_NUM (0x3f<<4) /* Bit 9.. 4: Model Number */ +#define PHY_I1_REV_MSK 0x0f /* Bit 3.. 0: Revision Number */ + +/* different Broadcom PHY Ids */ +#define PHY_BCOM_ID1_A1 0x6041 +#define PHY_BCOM_ID1_B2 0x6043 +#define PHY_BCOM_ID1_C0 0x6044 +#define PHY_BCOM_ID1_C5 0x6047 + + +/***** PHY_XMAC_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_XMAC_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ +#define PHY_AN_NXT_PG (1<<15) /* Bit 15: Request Next Page */ +#define PHY_X_AN_ACK (1<<14) /* Bit 14: (ro) Acknowledge Received */ +#define PHY_X_AN_RFB (3<<12) /* Bit 13..12: Remote Fault Bits */ + /* Bit 11.. 9: reserved */ +#define PHY_X_AN_PAUSE (3<<7) /* Bit 8.. 7: Pause Bits */ +#define PHY_X_AN_HD (1<<6) /* Bit 6: Half Duplex */ +#define PHY_X_AN_FD (1<<5) /* Bit 5: Full Duplex */ + /* Bit 4.. 0: reserved */ + +/***** PHY_BCOM_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_BCOM_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ +/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ + /* Bit 14: reserved */ +#define PHY_B_AN_RF (1<<13) /* Bit 13: Remote Fault */ + /* Bit 12: reserved */ +#define PHY_B_AN_ASP (1<<11) /* Bit 11: Asymmetric Pause */ +#define PHY_B_AN_PC (1<<10) /* Bit 10: Pause Capable */ + /* Bit 9..5: 100/10 BT cap bits ingnored */ +#define PHY_B_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/ + +/***** PHY_LONE_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_LONE_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ +/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ + /* Bit 14: reserved */ +#define PHY_L_AN_RF (1<<13) /* Bit 13: Remote Fault */ + /* Bit 12: reserved */ +#define PHY_L_AN_ASP (1<<11) /* Bit 11: Asymmetric Pause */ +#define PHY_L_AN_PC (1<<10) /* Bit 10: Pause Capable */ + /* Bit 9..5: 100/10 BT cap bits ingnored */ +#define PHY_L_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/ + +/***** PHY_NAT_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_NAT_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ +/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ + /* Bit 14: reserved */ +#define PHY_N_AN_RF (1<<13) /* Bit 13: Remote Fault */ + /* Bit 12: reserved */ +#define PHY_N_AN_100F (1<<11) /* Bit 11: 100Base-T2 FD Support */ +#define PHY_N_AN_100H (1<<10) /* Bit 10: 100Base-T2 HD Support */ + /* Bit 9..5: 100/10 BT cap bits ingnored */ +#define PHY_N_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/ + +/* field type definition for PHY_x_AN_SEL */ +#define PHY_SEL_TYPE 0x01 /* 00001 = Ethernet */ + +/***** PHY_XMAC_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ + /* Bit 15..4: reserved */ +#define PHY_ANE_LP_NP (1<<3) /* Bit 3: Link Partner can Next Page */ +#define PHY_ANE_LOC_NP (1<<2) /* Bit 2: Local PHY can Next Page */ +#define PHY_ANE_RX_PG (1<<1) /* Bit 1: Page Received */ + /* Bit 0: reserved */ + +/***** PHY_BCOM_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ +/***** PHY_LONE_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ +/***** PHY_MARV_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ + /* Bit 15..5: reserved */ +#define PHY_ANE_PAR_DF (1<<4) /* Bit 4: Parallel Detection Fault */ +/* PHY_ANE_LP_NP (see XMAC) Bit 3: Link Partner can Next Page */ +/* PHY_ANE_LOC_NP (see XMAC) Bit 2: Local PHY can Next Page */ +/* PHY_ANE_RX_PG (see XMAC) Bit 1: Page Received */ +#define PHY_ANE_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */ + +/***** PHY_XMAC_NEPG 16 bit r/w Next Page Register *****/ +/***** PHY_BCOM_NEPG 16 bit r/w Next Page Register *****/ +/***** PHY_LONE_NEPG 16 bit r/w Next Page Register *****/ +/***** PHY_XMAC_NEPG_LP 16 bit r/o Next Page Link Partner *****/ +/***** PHY_BCOM_NEPG_LP 16 bit r/o Next Page Link Partner *****/ +/***** PHY_LONE_NEPG_LP 16 bit r/o Next Page Link Partner *****/ +#define PHY_NP_MORE (1<<15) /* Bit 15: More, Next Pages to follow */ +#define PHY_NP_ACK1 (1<<14) /* Bit 14: (ro) Ack1, for receiving a message */ +#define PHY_NP_MSG_VAL (1<<13) /* Bit 13: Message Page valid */ +#define PHY_NP_ACK2 (1<<12) /* Bit 12: Ack2, comply with msg content */ +#define PHY_NP_TOG (1<<11) /* Bit 11: Toggle Bit, ensure sync */ +#define PHY_NP_MSG 0x07ff /* Bit 10..0: Message from/to Link Partner */ + +/* + * XMAC-Specific + */ +/***** PHY_XMAC_EXT_STAT 16 bit r/w Extended Status Register *****/ +#define PHY_X_EX_FD (1<<15) /* Bit 15: Device Supports Full Duplex */ +#define PHY_X_EX_HD (1<<14) /* Bit 14: Device Supports Half Duplex */ + /* Bit 13..0: reserved */ + +/***** PHY_XMAC_RES_ABI 16 bit r/o PHY Resolved Ability *****/ + /* Bit 15..9: reserved */ +#define PHY_X_RS_PAUSE (3<<7) /* Bit 8..7: selected Pause Mode */ +#define PHY_X_RS_HD (1<<6) /* Bit 6: Half Duplex Mode selected */ +#define PHY_X_RS_FD (1<<5) /* Bit 5: Full Duplex Mode selected */ +#define PHY_X_RS_ABLMIS (1<<4) /* Bit 4: duplex or pause cap mismatch */ +#define PHY_X_RS_PAUMIS (1<<3) /* Bit 3: pause capability mismatch */ + /* Bit 2..0: reserved */ +/* + * Remote Fault Bits (PHY_X_AN_RFB) encoding + */ +#define X_RFB_OK (0<<12) /* Bit 13..12 No errors, Link OK */ +#define X_RFB_LF (1<<12) /* Bit 13..12 Link Failure */ +#define X_RFB_OFF (2<<12) /* Bit 13..12 Offline */ +#define X_RFB_AN_ERR (3<<12) /* Bit 13..12 Auto-Negotiation Error */ + +/* + * Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding + */ +#define PHY_X_P_NO_PAUSE (0<<7) /* Bit 8..7: no Pause Mode */ +#define PHY_X_P_SYM_MD (1<<7) /* Bit 8..7: symmetric Pause Mode */ +#define PHY_X_P_ASYM_MD (2<<7) /* Bit 8..7: asymmetric Pause Mode */ +#define PHY_X_P_BOTH_MD (3<<7) /* Bit 8..7: both Pause Mode */ + + +/* + * Broadcom-Specific + */ +/***** PHY_BCOM_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +#define PHY_B_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ +#define PHY_B_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */ +#define PHY_B_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */ +#define PHY_B_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */ +#define PHY_B_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ +#define PHY_B_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ + /* Bit 7..0: reserved */ + +/***** PHY_BCOM_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +/***** PHY_MARV_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +#define PHY_B_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */ +#define PHY_B_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */ +#define PHY_B_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */ +#define PHY_B_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status */ +#define PHY_B_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */ +#define PHY_B_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */ + /* Bit 9..8: reserved */ +#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */ + +/***** PHY_BCOM_EXT_STAT 16 bit r/o Extended Status Register *****/ +#define PHY_B_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */ +#define PHY_B_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */ +#define PHY_B_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */ +#define PHY_B_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */ + /* Bit 11..0: reserved */ + +/***** PHY_BCOM_P_EXT_CTRL 16 bit r/w PHY Extended Control Reg *****/ +#define PHY_B_PEC_MAC_PHY (1<<15) /* Bit 15: 10BIT/GMI-Interface */ +#define PHY_B_PEC_DIS_CROSS (1<<14) /* Bit 14: Disable MDI Crossover */ +#define PHY_B_PEC_TX_DIS (1<<13) /* Bit 13: Tx output Disabled */ +#define PHY_B_PEC_INT_DIS (1<<12) /* Bit 12: Interrupts Disabled */ +#define PHY_B_PEC_F_INT (1<<11) /* Bit 11: Force Interrupt */ +#define PHY_B_PEC_BY_45 (1<<10) /* Bit 10: Bypass 4B5B-Decoder */ +#define PHY_B_PEC_BY_SCR (1<<9) /* Bit 9: Bypass Scrambler */ +#define PHY_B_PEC_BY_MLT3 (1<<8) /* Bit 8: Bypass MLT3 Encoder */ +#define PHY_B_PEC_BY_RXA (1<<7) /* Bit 7: Bypass Rx Alignm. */ +#define PHY_B_PEC_RES_SCR (1<<6) /* Bit 6: Reset Scrambler */ +#define PHY_B_PEC_EN_LTR (1<<5) /* Bit 5: Ena LED Traffic Mode */ +#define PHY_B_PEC_LED_ON (1<<4) /* Bit 4: Force LED's on */ +#define PHY_B_PEC_LED_OFF (1<<3) /* Bit 3: Force LED's off */ +#define PHY_B_PEC_EX_IPG (1<<2) /* Bit 2: Extend Tx IPG Mode */ +#define PHY_B_PEC_3_LED (1<<1) /* Bit 1: Three Link LED mode */ +#define PHY_B_PEC_HIGH_LA (1<<0) /* Bit 0: GMII FIFO Elasticy */ + +/***** PHY_BCOM_P_EXT_STAT 16 bit r/o PHY Extended Status Reg *****/ + /* Bit 15..14: reserved */ +#define PHY_B_PES_CROSS_STAT (1<<13) /* Bit 13: MDI Crossover Status */ +#define PHY_B_PES_INT_STAT (1<<12) /* Bit 12: Interrupt Status */ +#define PHY_B_PES_RRS (1<<11) /* Bit 11: Remote Receiver Stat. */ +#define PHY_B_PES_LRS (1<<10) /* Bit 10: Local Receiver Stat. */ +#define PHY_B_PES_LOCKED (1<<9) /* Bit 9: Locked */ +#define PHY_B_PES_LS (1<<8) /* Bit 8: Link Status */ +#define PHY_B_PES_RF (1<<7) /* Bit 7: Remote Fault */ +#define PHY_B_PES_CE_ER (1<<6) /* Bit 6: Carrier Ext Error */ +#define PHY_B_PES_BAD_SSD (1<<5) /* Bit 5: Bad SSD */ +#define PHY_B_PES_BAD_ESD (1<<4) /* Bit 4: Bad ESD */ +#define PHY_B_PES_RX_ER (1<<3) /* Bit 3: Receive Error */ +#define PHY_B_PES_TX_ER (1<<2) /* Bit 2: Transmit Error */ +#define PHY_B_PES_LOCK_ER (1<<1) /* Bit 1: Lock Error */ +#define PHY_B_PES_MLT3_ER (1<<0) /* Bit 0: MLT3 code Error */ + +/***** PHY_BCOM_FC_CTR 16 bit r/w False Carrier Counter *****/ + /* Bit 15..8: reserved */ +#define PHY_B_FC_CTR 0xff /* Bit 7..0: False Carrier Counter */ + +/***** PHY_BCOM_RNO_CTR 16 bit r/w Receive NOT_OK Counter *****/ +#define PHY_B_RC_LOC_MSK 0xff00 /* Bit 15..8: Local Rx NOT_OK cnt */ +#define PHY_B_RC_REM_MSK 0x00ff /* Bit 7..0: Remote Rx NOT_OK cnt */ + +/***** PHY_BCOM_AUX_CTRL 16 bit r/w Auxiliary Control Reg *****/ +#define PHY_B_AC_L_SQE (1<<15) /* Bit 15: Low Squelch */ +#define PHY_B_AC_LONG_PACK (1<<14) /* Bit 14: Rx Long Packets */ +#define PHY_B_AC_ER_CTRL (3<<12) /* Bit 13..12: Edgerate Control */ + /* Bit 11: reserved */ +#define PHY_B_AC_TX_TST (1<<10) /* Bit 10: Tx test bit, always 1 */ + /* Bit 9.. 8: reserved */ +#define PHY_B_AC_DIS_PRF (1<<7) /* Bit 7: dis part resp filter */ + /* Bit 6: reserved */ +#define PHY_B_AC_DIS_PM (1<<5) /* Bit 5: dis power management */ + /* Bit 4: reserved */ +#define PHY_B_AC_DIAG (1<<3) /* Bit 3: Diagnostic Mode */ + /* Bit 2.. 0: reserved */ + +/***** PHY_BCOM_AUX_STAT 16 bit r/o Auxiliary Status Reg *****/ +#define PHY_B_AS_AN_C (1<<15) /* Bit 15: AutoNeg complete */ +#define PHY_B_AS_AN_CA (1<<14) /* Bit 14: AN Complete Ack */ +#define PHY_B_AS_ANACK_D (1<<13) /* Bit 13: AN Ack Detect */ +#define PHY_B_AS_ANAB_D (1<<12) /* Bit 12: AN Ability Detect */ +#define PHY_B_AS_NPW (1<<11) /* Bit 11: AN Next Page Wait */ +#define PHY_B_AS_AN_RES_MSK (7<<8) /* Bit 10..8: AN HDC */ +#define PHY_B_AS_PDF (1<<7) /* Bit 7: Parallel Detect. Fault */ +#define PHY_B_AS_RF (1<<6) /* Bit 6: Remote Fault */ +#define PHY_B_AS_ANP_R (1<<5) /* Bit 5: AN Page Received */ +#define PHY_B_AS_LP_ANAB (1<<4) /* Bit 4: LP AN Ability */ +#define PHY_B_AS_LP_NPAB (1<<3) /* Bit 3: LP Next Page Ability */ +#define PHY_B_AS_LS (1<<2) /* Bit 2: Link Status */ +#define PHY_B_AS_PRR (1<<1) /* Bit 1: Pause Resolution-Rx */ +#define PHY_B_AS_PRT (1<<0) /* Bit 0: Pause Resolution-Tx */ + +#define PHY_B_AS_PAUSE_MSK (PHY_B_AS_PRR | PHY_B_AS_PRT) + +/***** PHY_BCOM_INT_STAT 16 bit r/o Interrupt Status Reg *****/ +/***** PHY_BCOM_INT_MASK 16 bit r/w Interrupt Mask Reg *****/ + /* Bit 15: reserved */ +#define PHY_B_IS_PSE (1<<14) /* Bit 14: Pair Swap Error */ +#define PHY_B_IS_MDXI_SC (1<<13) /* Bit 13: MDIX Status Change */ +#define PHY_B_IS_HCT (1<<12) /* Bit 12: counter above 32k */ +#define PHY_B_IS_LCT (1<<11) /* Bit 11: counter above 128 */ +#define PHY_B_IS_AN_PR (1<<10) /* Bit 10: Page Received */ +#define PHY_B_IS_NO_HDCL (1<<9) /* Bit 9: No HCD Link */ +#define PHY_B_IS_NO_HDC (1<<8) /* Bit 8: No HCD */ +#define PHY_B_IS_NEG_USHDC (1<<7) /* Bit 7: Negotiated Unsup. HCD */ +#define PHY_B_IS_SCR_S_ER (1<<6) /* Bit 6: Scrambler Sync Error */ +#define PHY_B_IS_RRS_CHANGE (1<<5) /* Bit 5: Remote Rx Stat Change */ +#define PHY_B_IS_LRS_CHANGE (1<<4) /* Bit 4: Local Rx Stat Change */ +#define PHY_B_IS_DUP_CHANGE (1<<3) /* Bit 3: Duplex Mode Change */ +#define PHY_B_IS_LSP_CHANGE (1<<2) /* Bit 2: Link Speed Change */ +#define PHY_B_IS_LST_CHANGE (1<<1) /* Bit 1: Link Status Changed */ +#define PHY_B_IS_CRC_ER (1<<0) /* Bit 0: CRC Error */ + +#define PHY_B_DEF_MSK (~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) + +/* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */ +#define PHY_B_P_NO_PAUSE (0<<10) /* Bit 11..10: no Pause Mode */ +#define PHY_B_P_SYM_MD (1<<10) /* Bit 11..10: symmetric Pause Mode */ +#define PHY_B_P_ASYM_MD (2<<10) /* Bit 11..10: asymmetric Pause Mode */ +#define PHY_B_P_BOTH_MD (3<<10) /* Bit 11..10: both Pause Mode */ + +/* + * Resolved Duplex mode and Capabilities (Aux Status Summary Reg) + */ +#define PHY_B_RES_1000FD (7<<8) /* Bit 10..8: 1000Base-T Full Dup. */ +#define PHY_B_RES_1000HD (6<<8) /* Bit 10..8: 1000Base-T Half Dup. */ +/* others: 100/10: invalid for us */ + +/* + * Level One-Specific + */ +/***** PHY_LONE_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +#define PHY_L_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ +#define PHY_L_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */ +#define PHY_L_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */ +#define PHY_L_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */ +#define PHY_L_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ +#define PHY_L_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ + /* Bit 7..0: reserved */ + +/***** PHY_LONE_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +#define PHY_L_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */ +#define PHY_L_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */ +#define PHY_L_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */ +#define PHY_L_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status */ +#define PHY_L_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */ +#define PHY_L_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */ + /* Bit 9..8: reserved */ +#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */ + +/***** PHY_LONE_EXT_STAT 16 bit r/o Extended Status Register *****/ +#define PHY_L_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */ +#define PHY_L_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */ +#define PHY_L_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */ +#define PHY_L_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */ + /* Bit 11..0: reserved */ + +/***** PHY_LONE_PORT_CFG 16 bit r/w Port Configuration Reg *****/ +#define PHY_L_PC_REP_MODE (1<<15) /* Bit 15: Repeater Mode */ + /* Bit 14: reserved */ +#define PHY_L_PC_TX_DIS (1<<13) /* Bit 13: Tx output Disabled */ +#define PHY_L_PC_BY_SCR (1<<12) /* Bit 12: Bypass Scrambler */ +#define PHY_L_PC_BY_45 (1<<11) /* Bit 11: Bypass 4B5B-Decoder */ +#define PHY_L_PC_JAB_DIS (1<<10) /* Bit 10: Jabber Disabled */ +#define PHY_L_PC_SQE (1<<9) /* Bit 9: Enable Heartbeat */ +#define PHY_L_PC_TP_LOOP (1<<8) /* Bit 8: TP Loopback */ +#define PHY_L_PC_SSS (1<<7) /* Bit 7: Smart Speed Selection */ +#define PHY_L_PC_FIFO_SIZE (1<<6) /* Bit 6: FIFO Size */ +#define PHY_L_PC_PRE_EN (1<<5) /* Bit 5: Preamble Enable */ +#define PHY_L_PC_CIM (1<<4) /* Bit 4: Carrier Integrity Mon */ +#define PHY_L_PC_10_SER (1<<3) /* Bit 3: Use Serial Output */ +#define PHY_L_PC_ANISOL (1<<2) /* Bit 2: Unisolate Port */ +#define PHY_L_PC_TEN_BIT (1<<1) /* Bit 1: 10bit iface mode on */ +#define PHY_L_PC_ALTCLOCK (1<<0) /* Bit 0: (ro) ALTCLOCK Mode on */ + +/***** PHY_LONE_Q_STAT 16 bit r/o Quick Status Reg *****/ +#define PHY_L_QS_D_RATE (3<<14) /* Bit 15..14: Data Rate */ +#define PHY_L_QS_TX_STAT (1<<13) /* Bit 13: Transmitting */ +#define PHY_L_QS_RX_STAT (1<<12) /* Bit 12: Receiving */ +#define PHY_L_QS_COL_STAT (1<<11) /* Bit 11: Collision */ +#define PHY_L_QS_L_STAT (1<<10) /* Bit 10: Link is up */ +#define PHY_L_QS_DUP_MOD (1<<9) /* Bit 9: Full/Half Duplex */ +#define PHY_L_QS_AN (1<<8) /* Bit 8: AutoNeg is On */ +#define PHY_L_QS_AN_C (1<<7) /* Bit 7: AN is Complete */ +#define PHY_L_QS_LLE (7<<4) /* Bit 6: Line Length Estim. */ +#define PHY_L_QS_PAUSE (1<<3) /* Bit 3: LP advertised Pause */ +#define PHY_L_QS_AS_PAUSE (1<<2) /* Bit 2: LP adv. asym. Pause */ +#define PHY_L_QS_ISOLATE (1<<1) /* Bit 1: CIM Isolated */ +#define PHY_L_QS_EVENT (1<<0) /* Bit 0: Event has occurred */ + +/***** PHY_LONE_INT_ENAB 16 bit r/w Interrupt Enable Reg *****/ +/***** PHY_LONE_INT_STAT 16 bit r/o Interrupt Status Reg *****/ + /* Bit 15..14: reserved */ +#define PHY_L_IS_AN_F (1<<13) /* Bit 13: Auto-Negotiation fault */ + /* Bit 12: not described */ +#define PHY_L_IS_CROSS (1<<11) /* Bit 11: Crossover used */ +#define PHY_L_IS_POL (1<<10) /* Bit 10: Polarity correct. used */ +#define PHY_L_IS_SS (1<<9) /* Bit 9: Smart Speed Downgrade */ +#define PHY_L_IS_CFULL (1<<8) /* Bit 8: Counter Full */ +#define PHY_L_IS_AN_C (1<<7) /* Bit 7: AutoNeg Complete */ +#define PHY_L_IS_SPEED (1<<6) /* Bit 6: Speed Changed */ +#define PHY_L_IS_DUP (1<<5) /* Bit 5: Duplex Changed */ +#define PHY_L_IS_LS (1<<4) /* Bit 4: Link Status Changed */ +#define PHY_L_IS_ISOL (1<<3) /* Bit 3: Isolate Occured */ +#define PHY_L_IS_MDINT (1<<2) /* Bit 2: (ro) STAT: MII Int Pending */ +#define PHY_L_IS_INTEN (1<<1) /* Bit 1: ENAB: Enable IRQs */ +#define PHY_L_IS_FORCE (1<<0) /* Bit 0: ENAB: Force Interrupt */ + +/* int. mask */ +#define PHY_L_DEF_MSK (PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN) + +/***** PHY_LONE_LED_CFG 16 bit r/w LED Configuration Reg *****/ +#define PHY_L_LC_LEDC (3<<14) /* Bit 15..14: Col/Blink/On/Off */ +#define PHY_L_LC_LEDR (3<<12) /* Bit 13..12: Rx/Blink/On/Off */ +#define PHY_L_LC_LEDT (3<<10) /* Bit 11..10: Tx/Blink/On/Off */ +#define PHY_L_LC_LEDG (3<<8) /* Bit 9..8: Giga/Blink/On/Off */ +#define PHY_L_LC_LEDS (3<<6) /* Bit 7..6: 10-100/Blink/On/Off */ +#define PHY_L_LC_LEDL (3<<4) /* Bit 5..4: Link/Blink/On/Off */ +#define PHY_L_LC_LEDF (3<<2) /* Bit 3..2: Duplex/Blink/On/Off */ +#define PHY_L_LC_PSTRECH (1<<1) /* Bit 1: Strech LED Pulses */ +#define PHY_L_LC_FREQ (1<<0) /* Bit 0: 30/100 ms */ + +/***** PHY_LONE_PORT_CTRL 16 bit r/w Port Control Reg *****/ +#define PHY_L_PC_TX_TCLK (1<<15) /* Bit 15: Enable TX_TCLK */ + /* Bit 14: reserved */ +#define PHY_L_PC_ALT_NP (1<<13) /* Bit 14: Alternate Next Page */ +#define PHY_L_PC_GMII_ALT (1<<12) /* Bit 13: Alternate GMII driver */ + /* Bit 11: reserved */ +#define PHY_L_PC_TEN_CRS (1<<10) /* Bit 10: Extend CRS*/ + /* Bit 9..0: not described */ + +/***** PHY_LONE_CIM 16 bit r/o CIM Reg *****/ +#define PHY_L_CIM_ISOL (255<<8)/* Bit 15..8: Isolate Count */ +#define PHY_L_CIM_FALSE_CAR (255<<0)/* Bit 7..0: False Carrier Count */ + + +/* + * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding + */ +#define PHY_L_P_NO_PAUSE (0<<10) /* Bit 11..10: no Pause Mode */ +#define PHY_L_P_SYM_MD (1<<10) /* Bit 11..10: symmetric Pause Mode */ +#define PHY_L_P_ASYM_MD (2<<10) /* Bit 11..10: asymmetric Pause Mode */ +#define PHY_L_P_BOTH_MD (3<<10) /* Bit 11..10: both Pause Mode */ + + +/* + * National-Specific + */ +/***** PHY_NAT_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +#define PHY_N_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ +#define PHY_N_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */ +#define PHY_N_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */ +#define PHY_N_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */ +#define PHY_N_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ +#define PHY_N_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ +#define PHY_N_1000C_APC (1<<7) /* Bit 7: Asymmetric Pause Cap. */ + /* Bit 6..0: reserved */ + +/***** PHY_NAT_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +#define PHY_N_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */ +#define PHY_N_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */ +#define PHY_N_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */ +#define PHY_N_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status*/ +#define PHY_N_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */ +#define PHY_N_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */ +#define PHY_N_1000C_LP_APC (1<<9) /* Bit 9: LP Asym. Pause Cap. */ + /* Bit 8: reserved */ +#define PHY_N_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */ + +/***** PHY_NAT_EXT_STAT 16 bit r/o Extended Status Register *****/ +#define PHY_N_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */ +#define PHY_N_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */ +#define PHY_N_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */ +#define PHY_N_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */ + /* Bit 11..0: reserved */ + +/* todo: those are still missing */ +/***** PHY_NAT_EXT_CTRL1 16 bit r/o Extended Control Reg1 *****/ +/***** PHY_NAT_Q_STAT1 16 bit r/o Quick Status Reg1 *****/ +/***** PHY_NAT_10B_OP 16 bit r/o 10Base-T Operations Reg *****/ +/***** PHY_NAT_EXT_CTRL2 16 bit r/o Extended Control Reg1 *****/ +/***** PHY_NAT_Q_STAT2 16 bit r/o Quick Status Reg2 *****/ +/***** PHY_NAT_PHY_ADDR 16 bit r/o PHY Address Register *****/ + +/* + * Marvell-Specific + */ +/***** PHY_MARV_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_MARV_AUNE_LP 16 bit r/w Link Part Ability Reg *****/ +#define PHY_M_AN_NXT_PG BIT_15 /* Request Next Page */ +#define PHY_M_AN_ACK BIT_14 /* (ro) Acknowledge Received */ +#define PHY_M_AN_RF BIT_13 /* Remote Fault */ + /* Bit 12: reserved */ +#define PHY_M_AN_ASP BIT_11 /* Asymmetric Pause */ +#define PHY_M_AN_PC BIT_10 /* MAC Pause implemented */ +#define PHY_M_AN_100_FD BIT_8 /* Advertise 100Base-TX Full Duplex */ +#define PHY_M_AN_100_HD BIT_7 /* Advertise 100Base-TX Half Duplex */ +#define PHY_M_AN_10_FD BIT_6 /* Advertise 10Base-TX Full Duplex */ +#define PHY_M_AN_10_HD BIT_5 /* Advertise 10Base-TX Half Duplex */ + +/* special defines for FIBER (88E1011S only) */ +#define PHY_M_AN_ASP_X BIT_8 /* Asymmetric Pause */ +#define PHY_M_AN_PC_X BIT_7 /* MAC Pause implemented */ +#define PHY_M_AN_1000X_AHD BIT_6 /* Advertise 10000Base-X Half Duplex */ +#define PHY_M_AN_1000X_AFD BIT_5 /* Advertise 10000Base-X Full Duplex */ + +/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */ +#define PHY_M_P_NO_PAUSE_X (0<<7) /* Bit 8.. 7: no Pause Mode */ +#define PHY_M_P_SYM_MD_X (1<<7) /* Bit 8.. 7: symmetric Pause Mode */ +#define PHY_M_P_ASYM_MD_X (2<<7) /* Bit 8.. 7: asymmetric Pause Mode */ +#define PHY_M_P_BOTH_MD_X (3<<7) /* Bit 8.. 7: both Pause Mode */ + +/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +#define PHY_M_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ +#define PHY_M_1000C_MSE (1<<12) /* Bit 12: Manual Master/Slave Enable */ +#define PHY_M_1000C_MSC (1<<11) /* Bit 11: M/S Configuration (1=Master) */ +#define PHY_M_1000C_MPD (1<<10) /* Bit 10: Multi-Port Device */ +#define PHY_M_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ +#define PHY_M_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ + /* Bit 7..0: reserved */ + +/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/ +#define PHY_M_PC_TX_FFD_MSK (3<<14) /* Bit 15..14: Tx FIFO Depth Mask */ +#define PHY_M_PC_RX_FFD_MSK (3<<12) /* Bit 13..12: Rx FIFO Depth Mask */ +#define PHY_M_PC_ASS_CRS_TX (1<<11) /* Bit 11: Assert CRS on Transmit */ +#define PHY_M_PC_FL_GOOD (1<<10) /* Bit 10: Force Link Good */ +#define PHY_M_PC_EN_DET_MSK (3<<8) /* Bit 9.. 8: Energy Detect Mask */ +#define PHY_M_PC_ENA_EXT_D (1<<7) /* Bit 7: Enable Ext. Distance (10BT) */ +#define PHY_M_PC_MDIX_MSK (3<<5) /* Bit 6.. 5: MDI/MDIX Config. Mask */ +#define PHY_M_PC_DIS_125CLK (1<<4) /* Bit 4: Disable 125 CLK */ +#define PHY_M_PC_MAC_POW_UP (1<<3) /* Bit 3: MAC Power up */ +#define PHY_M_PC_SQE_T_ENA (1<<2) /* Bit 2: SQE Test Enabled */ +#define PHY_M_PC_POL_R_DIS (1<<1) /* Bit 1: Polarity Reversal Disabled */ +#define PHY_M_PC_DIS_JABBER (1<<0) /* Bit 0: Disable Jabber */ + +#define PHY_M_PC_EN_DET SHIFT8(2) /* Energy Detect (Mode 1) */ +#define PHY_M_PC_EN_DET_PLUS SHIFT8(3) /* Energy Detect Plus (Mode 2) */ + +#define PHY_M_PC_MDI_XMODE(x) SHIFT5(x) +#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */ +#define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */ +#define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */ + +/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/ +#define PHY_M_PS_SPEED_MSK (3<<14) /* Bit 15..14: Speed Mask */ +#define PHY_M_PS_SPEED_1000 (1<<15) /* 10 = 1000 Mbps */ +#define PHY_M_PS_SPEED_100 (1<<14) /* 01 = 100 Mbps */ +#define PHY_M_PS_SPEED_10 0 /* 00 = 10 Mbps */ +#define PHY_M_PS_FULL_DUP (1<<13) /* Bit 13: Full Duplex */ +#define PHY_M_PS_PAGE_REC (1<<12) /* Bit 12: Page Received */ +#define PHY_M_PS_SPDUP_RES (1<<11) /* Bit 11: Speed & Duplex Resolved */ +#define PHY_M_PS_LINK_UP (1<<10) /* Bit 10: Link Up */ +#define PHY_M_PS_CABLE_MSK (3<<7) /* Bit 9.. 7: Cable Length Mask */ +#define PHY_M_PS_MDI_X_STAT (1<<6) /* Bit 6: MDI Crossover Stat (1=MDIX) */ +#define PHY_M_PS_DOWNS_STAT (1<<5) /* Bit 5: Downshift Status (1=downsh.) */ +#define PHY_M_PS_ENDET_STAT (1<<4) /* Bit 4: Energy Detect Status (1=act) */ +#define PHY_M_PS_TX_P_EN (1<<3) /* Bit 3: Tx Pause Enabled */ +#define PHY_M_PS_RX_P_EN (1<<2) /* Bit 2: Rx Pause Enabled */ +#define PHY_M_PS_POL_REV (1<<1) /* Bit 1: Polarity Reversed */ +#define PHY_M_PC_JABBER (1<<0) /* Bit 0: Jabber */ + +#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN) + +/***** PHY_MARV_INT_MASK 16 bit r/w Interrupt Mask Reg *****/ +/***** PHY_MARV_INT_STAT 16 bit r/o Interrupt Status Reg *****/ +#define PHY_M_IS_AN_ERROR (1<<15) /* Bit 15: Auto-Negotiation Error */ +#define PHY_M_IS_LSP_CHANGE (1<<14) /* Bit 14: Link Speed Changed */ +#define PHY_M_IS_DUP_CHANGE (1<<13) /* Bit 13: Duplex Mode Changed */ +#define PHY_M_IS_AN_PR (1<<12) /* Bit 12: Page Received */ +#define PHY_M_IS_AN_COMPL (1<<11) /* Bit 11: Auto-Negotiation Completed */ +#define PHY_M_IS_LST_CHANGE (1<<10) /* Bit 10: Link Status Changed */ +#define PHY_M_IS_SYMB_ERROR (1<<9) /* Bit 9: Symbol Error */ +#define PHY_M_IS_FALSE_CARR (1<<8) /* Bit 8: False Carrier */ +#define PHY_M_IS_FIFO_ERROR (1<<7) /* Bit 7: FIFO Overflow/Underrun Error */ +#define PHY_M_IS_MDI_CHANGE (1<<6) /* Bit 6: MDI Crossover Changed */ +#define PHY_M_IS_DOWNSH_DET (1<<5) /* Bit 5: Downshift Detected */ +#define PHY_M_IS_END_CHANGE (1<<4) /* Bit 4: Energy Detect Changed */ + /* Bit 3..2: reserved */ +#define PHY_M_IS_POL_CHANGE (1<<1) /* Bit 1: Polarity Changed */ +#define PHY_M_IS_JABBER (1<<0) /* Bit 0: Jabber */ + +#define PHY_M_DEF_MSK (PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | \ + PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR) + +/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/ +#define PHY_M_EC_M_DSC_MSK (3<<10) /* Bit 11..10: Master downshift counter */ +#define PHY_M_EC_S_DSC_MSK (3<<8) /* Bit 9.. 8: Slave downshift counter */ +#define PHY_M_EC_MAC_S_MSK (7<<4) /* Bit 6.. 4: Def. MAC interface speed */ +#define PHY_M_EC_FIB_AN_ENA (1<<3) /* Bit 3: Fiber Auto-Neg. Enable */ + +#define PHY_M_EC_M_DSC(x) SHIFT10(x) /* 00=1x; 01=2x; 10=3x; 11=4x */ +#define PHY_M_EC_S_DSC(x) SHIFT8(x) /* 00=dis; 01=1x; 10=2x; 11=3x */ +#define PHY_M_EC_MAC_S(x) SHIFT4(x) /* 01X=0; 110=2.5; 111=25 (MHz) */ + +#define MAC_TX_CLK_0_MHZ 2 +#define MAC_TX_CLK_2_5_MHZ 6 +#define MAC_TX_CLK_25_MHZ 7 + +/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/ +#define PHY_M_LEDC_DIS_LED (1<<15) /* Bit 15: Disable LED */ +#define PHY_M_LEDC_PULS_MSK (7<<12) /* Bit 14..12: Pulse Stretch Mask */ +#define PHY_M_LEDC_F_INT (1<<11) /* Bit 11: Force Interrupt */ +#define PHY_M_LEDC_BL_R_MSK (7<<8) /* Bit 10.. 8: Blink Rate Mask */ + /* Bit 7.. 5: reserved */ +#define PHY_M_LEDC_LINK_MSK (3<<3) /* Bit 4.. 3: Link Control Mask */ +#define PHY_M_LEDC_DP_CTRL (1<<2) /* Bit 2: Duplex Control */ +#define PHY_M_LEDC_RX_CTRL (1<<1) /* Bit 1: Rx activity / Link */ +#define PHY_M_LEDC_TX_CTRL (1<<0) /* Bit 0: Tx activity / Link */ + +#define PHY_M_LED_PULS_DUR(x) SHIFT12(x) /* Pulse Stretch Duration */ + +#define PULS_NO_STR 0 /* no pulse stretching */ +#define PULS_21MS 1 /* 21 ms to 42 ms */ +#define PULS_42MS 2 /* 42 ms to 84 ms */ +#define PULS_84MS 3 /* 84 ms to 170 ms */ +#define PULS_170MS 4 /* 170 ms to 340 ms */ +#define PULS_340MS 5 /* 340 ms to 670 ms */ +#define PULS_670MS 6 /* 670 ms to 1.3 s */ +#define PULS_1300MS 7 /* 1.3 s to 2.7 s */ + +#define PHY_M_LED_BLINK_RT(x) SHIFT8(x) /* Blink Rate */ + +#define BLINK_42MS 0 /* 42 ms */ +#define BLINK_84MS 1 /* 84 ms */ +#define BLINK_170MS 2 /* 170 ms */ +#define BLINK_340MS 3 /* 340 ms */ +#define BLINK_670MS 4 /* 670 ms */ + /* values 5 - 7: reserved */ + +/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ +#define PHY_M_LED_MO_DUP(x) SHIFT10(x) /* Bit 11..10: Duplex */ +#define PHY_M_LED_MO_10(x) SHIFT8(x) /* Bit 9.. 8: Link 10 */ +#define PHY_M_LED_MO_100(x) SHIFT6(x) /* Bit 7.. 6: Link 100 */ +#define PHY_M_LED_MO_1000(x) SHIFT4(x) /* Bit 5.. 4: Link 1000 */ +#define PHY_M_LED_MO_RX(x) SHIFT2(x) /* Bit 3.. 2: Rx */ +#define PHY_M_LED_MO_TX(x) SHIFT0(x) /* Bit 1.. 0: Tx */ + +#define MO_LED_NORM 0 +#define MO_LED_BLINK 1 +#define MO_LED_OFF 2 +#define MO_LED_ON 3 + +/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/ + /* Bit 15.. 7: reserved */ +#define PHY_M_EC2_FI_IMPED (1<<6) /* Bit 6: Fiber Input Impedance */ +#define PHY_M_EC2_FO_IMPED (1<<5) /* Bit 5: Fiber Output Impedance */ +#define PHY_M_EC2_FO_M_CLK (1<<4) /* Bit 4: Fiber Mode Clock Enable */ +#define PHY_M_EC2_FO_BOOST (1<<3) /* Bit 3: Fiber Output Boost */ +#define PHY_M_EC2_FO_AM_MSK 7 /* Bit 2.. 0: Fiber Output Amplitude */ + +/***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/ +#define PHY_M_FC_AUTO_SEL (1<<15) /* Bit 15: Fiber/Copper Auto Sel. dis. */ +#define PHY_M_FC_AN_REG_ACC (1<<14) /* Bit 14: Fiber/Copper Autoneg. reg acc */ +#define PHY_M_FC_RESULUTION (1<<13) /* Bit 13: Fiber/Copper Resulution */ +#define PHY_M_SER_IF_AN_BP (1<<12) /* Bit 12: Ser IF autoneg. bypass enable */ +#define PHY_M_SER_IF_BP_ST (1<<11) /* Bit 11: Ser IF autoneg. bypass status */ +#define PHY_M_IRQ_POLARITY (1<<10) /* Bit 10: IRQ polarity */ + /* Bit 9..4: reserved */ +#define PHY_M_UNDOC1 (1<< 7) /* undocumented bit !! */ +#define PHY_M_MODE_MASK (0xf<<0)/* Bit 3..0: copy of HWCFG MODE[3:0] */ + + +/***** PHY_MARV_CABLE_DIAG 16 bit r/o Cable Diagnostic Reg *****/ +#define PHY_M_CABD_ENA_TEST (1<<15) /* Bit 15: Enable Test */ +#define PHY_M_CABD_STAT_MSK (3<<13) /* Bit 14..13: Status */ + /* Bit 12.. 8: reserved */ +#define PHY_M_CABD_DIST_MSK 0xff /* Bit 7.. 0: Distance */ + +/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */ +#define CABD_STAT_NORMAL 0 +#define CABD_STAT_SHORT 1 +#define CABD_STAT_OPEN 2 +#define CABD_STAT_FAIL 3 + + +/* + * GMAC registers + * + * The GMAC registers are 16 or 32 bits wide. + * The GMACs host processor interface is 16 bits wide, + * therefore ALL registers will be addressed with 16 bit accesses. + * + * The following macros are provided to access the GMAC registers + * GM_IN16(), GM_OUT16, GM_IN32(), GM_OUT32(), GM_INADR(), GM_OUTADR(), + * GM_INHASH(), and GM_OUTHASH(). + * The macros are defined in SkGeHw.h. + * + * Note: NA reg = Network Address e.g DA, SA etc. + * + */ + +/* Port Registers */ +#define GM_GP_STAT 0x0000 /* 16 bit r/o General Purpose Status */ +#define GM_GP_CTRL 0x0004 /* 16 bit r/w General Purpose Control */ +#define GM_TX_CTRL 0x0008 /* 16 bit r/w Transmit Control Reg. */ +#define GM_RX_CTRL 0x000c /* 16 bit r/w Receive Control Reg. */ +#define GM_TX_FLOW_CTRL 0x0010 /* 16 bit r/w Transmit Flow-Control */ +#define GM_TX_PARAM 0x0014 /* 16 bit r/w Transmit Parameter Reg. */ +#define GM_SERIAL_MODE 0x0018 /* 16 bit r/w Serial Mode Register */ + +/* Source Address Registers */ +#define GM_SRC_ADDR_1L 0x001c /* 16 bit r/w Source Address 1 (low) */ +#define GM_SRC_ADDR_1M 0x0020 /* 16 bit r/w Source Address 1 (middle) */ +#define GM_SRC_ADDR_1H 0x0024 /* 16 bit r/w Source Address 1 (high) */ +#define GM_SRC_ADDR_2L 0x0028 /* 16 bit r/w Source Address 2 (low) */ +#define GM_SRC_ADDR_2M 0x002c /* 16 bit r/w Source Address 2 (middle) */ +#define GM_SRC_ADDR_2H 0x0030 /* 16 bit r/w Source Address 2 (high) */ + +/* Multicast Address Hash Registers */ +#define GM_MC_ADDR_H1 0x0034 /* 16 bit r/w Multicast Address Hash 1 */ +#define GM_MC_ADDR_H2 0x0038 /* 16 bit r/w Multicast Address Hash 2 */ +#define GM_MC_ADDR_H3 0x003c /* 16 bit r/w Multicast Address Hash 3 */ +#define GM_MC_ADDR_H4 0x0040 /* 16 bit r/w Multicast Address Hash 4 */ + +/* Interrupt Source Registers */ +#define GM_TX_IRQ_SRC 0x0044 /* 16 bit r/o Tx Overflow IRQ Source */ +#define GM_RX_IRQ_SRC 0x0048 /* 16 bit r/o Rx Overflow IRQ Source */ +#define GM_TR_IRQ_SRC 0x004c /* 16 bit r/o Tx/Rx Over. IRQ Source */ + +/* Interrupt Mask Registers */ +#define GM_TX_IRQ_MSK 0x0050 /* 16 bit r/w Tx Overflow IRQ Mask */ +#define GM_RX_IRQ_MSK 0x0054 /* 16 bit r/w Rx Overflow IRQ Mask */ +#define GM_TR_IRQ_MSK 0x0058 /* 16 bit r/w Tx/Rx Over. IRQ Mask */ + +/* Serial Management Interface (SMI) Registers */ +#define GM_SMI_CTRL 0x0080 /* 16 bit r/w SMI Control Register */ +#define GM_SMI_DATA 0x0084 /* 16 bit r/w SMI Data Register */ +#define GM_PHY_ADDR 0x0088 /* 16 bit r/w GPHY Address Register */ + +/* MIB Counters */ +#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */ +#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */ + +/* + * MIB Counters base address definitions (low word) - + * use offset 4 for access to high word (32 bit r/o) + */ +#define GM_RXF_UC_OK \ + (GM_MIB_CNT_BASE + 0) /* Unicast Frames Received OK */ +#define GM_RXF_BC_OK \ + (GM_MIB_CNT_BASE + 8) /* Broadcast Frames Received OK */ +#define GM_RXF_MPAUSE \ + (GM_MIB_CNT_BASE + 16) /* Pause MAC Ctrl Frames Received */ +#define GM_RXF_MC_OK \ + (GM_MIB_CNT_BASE + 24) /* Multicast Frames Received OK */ +#define GM_RXF_FCS_ERR \ + (GM_MIB_CNT_BASE + 32) /* Rx Frame Check Seq. Error */ + /* GM_MIB_CNT_BASE + 40: reserved */ +#define GM_RXO_OK_LO \ + (GM_MIB_CNT_BASE + 48) /* Octets Received OK Low */ +#define GM_RXO_OK_HI \ + (GM_MIB_CNT_BASE + 56) /* Octets Received OK High */ +#define GM_RXO_ERR_LO \ + (GM_MIB_CNT_BASE + 64) /* Octets Received Invalid Low */ +#define GM_RXO_ERR_HI \ + (GM_MIB_CNT_BASE + 72) /* Octets Received Invalid High */ +#define GM_RXF_SHT \ + (GM_MIB_CNT_BASE + 80) /* Frames <64 Byte Received OK */ +#define GM_RXE_FRAG \ + (GM_MIB_CNT_BASE + 88) /* Frames <64 Byte Received with FCS Err */ +#define GM_RXF_64B \ + (GM_MIB_CNT_BASE + 96) /* 64 Byte Rx Frame */ +#define GM_RXF_127B \ + (GM_MIB_CNT_BASE + 104) /* 65-127 Byte Rx Frame */ +#define GM_RXF_255B \ + (GM_MIB_CNT_BASE + 112) /* 128-255 Byte Rx Frame */ +#define GM_RXF_511B \ + (GM_MIB_CNT_BASE + 120) /* 256-511 Byte Rx Frame */ +#define GM_RXF_1023B \ + (GM_MIB_CNT_BASE + 128) /* 512-1023 Byte Rx Frame */ +#define GM_RXF_1518B \ + (GM_MIB_CNT_BASE + 136) /* 1024-1518 Byte Rx Frame */ +#define GM_RXF_MAX_SZ \ + (GM_MIB_CNT_BASE + 144) /* 1519-MaxSize Byte Rx Frame */ +#define GM_RXF_LNG_ERR \ + (GM_MIB_CNT_BASE + 152) /* Rx Frame too Long Error */ +#define GM_RXF_JAB_PKT \ + (GM_MIB_CNT_BASE + 160) /* Rx Jabber Packet Frame */ + /* GM_MIB_CNT_BASE + 168: reserved */ +#define GM_RXE_FIFO_OV \ + (GM_MIB_CNT_BASE + 176) /* Rx FIFO overflow Event */ + /* GM_MIB_CNT_BASE + 184: reserved */ +#define GM_TXF_UC_OK \ + (GM_MIB_CNT_BASE + 192) /* Unicast Frames Xmitted OK */ +#define GM_TXF_BC_OK \ + (GM_MIB_CNT_BASE + 200) /* Broadcast Frames Xmitted OK */ +#define GM_TXF_MPAUSE \ + (GM_MIB_CNT_BASE + 208) /* Pause MAC Ctrl Frames Xmitted */ +#define GM_TXF_MC_OK \ + (GM_MIB_CNT_BASE + 216) /* Multicast Frames Xmitted OK */ +#define GM_TXO_OK_LO \ + (GM_MIB_CNT_BASE + 224) /* Octets Transmitted OK Low */ +#define GM_TXO_OK_HI \ + (GM_MIB_CNT_BASE + 232) /* Octets Transmitted OK High */ +#define GM_TXF_64B \ + (GM_MIB_CNT_BASE + 240) /* 64 Byte Tx Frame */ +#define GM_TXF_127B \ + (GM_MIB_CNT_BASE + 248) /* 65-127 Byte Tx Frame */ +#define GM_TXF_255B \ + (GM_MIB_CNT_BASE + 256) /* 128-255 Byte Tx Frame */ +#define GM_TXF_511B \ + (GM_MIB_CNT_BASE + 264) /* 256-511 Byte Tx Frame */ +#define GM_TXF_1023B \ + (GM_MIB_CNT_BASE + 272) /* 512-1023 Byte Tx Frame */ +#define GM_TXF_1518B \ + (GM_MIB_CNT_BASE + 280) /* 1024-1518 Byte Tx Frame */ +#define GM_TXF_MAX_SZ \ + (GM_MIB_CNT_BASE + 288) /* 1519-MaxSize Byte Tx Frame */ + /* GM_MIB_CNT_BASE + 296: reserved */ +#define GM_TXF_COL \ + (GM_MIB_CNT_BASE + 304) /* Tx Collision */ +#define GM_TXF_LAT_COL \ + (GM_MIB_CNT_BASE + 312) /* Tx Late Collision */ +#define GM_TXF_ABO_COL \ + (GM_MIB_CNT_BASE + 320) /* Tx aborted due to Exces. Col. */ +#define GM_TXF_MUL_COL \ + (GM_MIB_CNT_BASE + 328) /* Tx Multiple Collision */ +#define GM_TXF_SNG_COL \ + (GM_MIB_CNT_BASE + 336) /* Tx Single Collision */ +#define GM_TXE_FIFO_UR \ + (GM_MIB_CNT_BASE + 344) /* Tx FIFO Underrun Event */ + +/*----------------------------------------------------------------------------*/ +/* + * GMAC Bit Definitions + * + * If the bit access behaviour differs from the register access behaviour + * (r/w, r/o) this is documented after the bit number. + * The following bit access behaviours are used: + * (sc) self clearing + * (r/o) read only + */ + +/* GM_GP_STAT 16 bit r/o General Purpose Status Register */ +#define GM_GPSR_SPEED (1<<15) /* Bit 15: Port Speed (1 = 100 Mbps) */ +#define GM_GPSR_DUPLEX (1<<14) /* Bit 14: Duplex Mode (1 = Full) */ +#define GM_GPSR_FC_TX_DIS (1<<13) /* Bit 13: Tx Flow-Control Mode Disabled */ +#define GM_GPSR_LINK_UP (1<<12) /* Bit 12: Link Up Status */ +#define GM_GPSR_PAUSE (1<<11) /* Bit 11: Pause State */ +#define GM_GPSR_TX_ACTIVE (1<<10) /* Bit 10: Tx in Progress */ +#define GM_GPSR_EXC_COL (1<<9) /* Bit 9: Excessive Collisions Occured */ +#define GM_GPSR_LAT_COL (1<<8) /* Bit 8: Late Collisions Occured */ + /* Bit 7..6: reserved */ +#define GM_GPSR_PHY_ST_CH (1<<5) /* Bit 5: PHY Status Change */ +#define GM_GPSR_GIG_SPEED (1<<4) /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */ +#define GM_GPSR_PART_MODE (1<<3) /* Bit 3: Partition mode */ +#define GM_GPSR_FC_RX_DIS (1<<2) /* Bit 2: Rx Flow-Control Mode Disabled */ +#define GM_GPSR_PROM_EN (1<<1) /* Bit 1: Promiscuous Mode Enabled */ + /* Bit 0: reserved */ + +/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */ + /* Bit 15: reserved */ +#define GM_GPCR_PROM_ENA (1<<14) /* Bit 14: Enable Promiscuous Mode */ +#define GM_GPCR_FC_TX_DIS (1<<13) /* Bit 13: Disable Tx Flow-Control Mode */ +#define GM_GPCR_TX_ENA (1<<12) /* Bit 12: Enable Transmit */ +#define GM_GPCR_RX_ENA (1<<11) /* Bit 11: Enable Receive */ +#define GM_GPCR_BURST_ENA (1<<10) /* Bit 10: Enable Burst Mode */ +#define GM_GPCR_LOOP_ENA (1<<9) /* Bit 9: Enable MAC Loopback Mode */ +#define GM_GPCR_PART_ENA (1<<8) /* Bit 8: Enable Partition Mode */ +#define GM_GPCR_GIGS_ENA (1<<7) /* Bit 7: Gigabit Speed (1000 Mbps) */ +#define GM_GPCR_FL_PASS (1<<6) /* Bit 6: Force Link Pass */ +#define GM_GPCR_DUP_FULL (1<<5) /* Bit 5: Full Duplex Mode */ +#define GM_GPCR_FC_RX_DIS (1<<4) /* Bit 4: Disable Rx Flow-Control Mode */ +#define GM_GPCR_SPEED_100 (1<<3) /* Bit 3: Port Speed 100 Mbps */ +#define GM_GPCR_AU_DUP_DIS (1<<2) /* Bit 2: Disable Auto-Update Duplex */ +#define GM_GPCR_AU_FCT_DIS (1<<1) /* Bit 1: Disable Auto-Update Flow-C. */ +#define GM_GPCR_AU_SPD_DIS (1<<0) /* Bit 0: Disable Auto-Update Speed */ + +#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100) +#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\ + GM_GPCR_AU_SPD_DIS) + +/* GM_TX_CTRL 16 bit r/w Transmit Control Register */ +#define GM_TXCR_FORCE_JAM (1<<15) /* Bit 15: Force Jam / Flow-Control */ +#define GM_TXCR_CRC_DIS (1<<14) /* Bit 14: Disable insertion of CRC */ +#define GM_TXCR_PAD_DIS (1<<13) /* Bit 13: Disable padding of packets */ +#define GM_TXCR_COL_THR_MSK (7<<10) /* Bit 12..10: Collision Threshold */ + +#define TX_COL_THR(x) (SHIFT10(x) & GM_TXCR_COL_THR_MSK) + +#define TX_COL_DEF 0x04 + +/* GM_RX_CTRL 16 bit r/w Receive Control Register */ +#define GM_RXCR_UCF_ENA (1<<15) /* Bit 15: Enable Unicast filtering */ +#define GM_RXCR_MCF_ENA (1<<14) /* Bit 14: Enable Multicast filtering */ +#define GM_RXCR_CRC_DIS (1<<13) /* Bit 13: Remove 4-byte CRC */ +#define GM_RXCR_PASS_FC (1<<12) /* Bit 12: Pass FC packets to FIFO */ + +/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */ +#define GM_TXPA_JAMLEN_MSK (0x03<<14) /* Bit 15..14: Jam Length */ +#define GM_TXPA_JAMIPG_MSK (0x1f<<9) /* Bit 13..9: Jam IPG */ +#define GM_TXPA_JAMDAT_MSK (0x1f<<4) /* Bit 8..4: IPG Jam to Data */ + /* Bit 3..0: reserved */ + +#define TX_JAM_LEN_VAL(x) (SHIFT14(x) & GM_TXPA_JAMLEN_MSK) +#define TX_JAM_IPG_VAL(x) (SHIFT9(x) & GM_TXPA_JAMIPG_MSK) +#define TX_IPG_JAM_DATA(x) (SHIFT4(x) & GM_TXPA_JAMDAT_MSK) + +#define TX_JAM_LEN_DEF 0x03 +#define TX_JAM_IPG_DEF 0x0b +#define TX_IPG_JAM_DEF 0x1c + +/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */ +#define GM_SMOD_DATABL_MSK (0x1f<<11) /* Bit 15..11: Data Blinder (r/o) */ +#define GM_SMOD_LIMIT_4 (1<<10) /* Bit 10: 4 consecutive Tx trials */ +#define GM_SMOD_VLAN_ENA (1<<9) /* Bit 9: Enable VLAN (Max. Frame Len) */ +#define GM_SMOD_JUMBO_ENA (1<<8) /* Bit 8: Enable Jumbo (Max. Frame Len) */ + /* Bit 7..5: reserved */ +#define GM_SMOD_IPG_MSK 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */ + +#define DATA_BLIND_VAL(x) (SHIFT11(x) & GM_SMOD_DATABL_MSK) +#define DATA_BLIND_DEF 0x04 + +#define IPG_DATA_VAL(x) (x & GM_SMOD_IPG_MSK) +#define IPG_DATA_DEF 0x1e + +/* GM_SMI_CTRL 16 bit r/w SMI Control Register */ +#define GM_SMI_CT_PHY_A_MSK (0x1f<<11) /* Bit 15..11: PHY Device Address */ +#define GM_SMI_CT_REG_A_MSK (0x1f<<6) /* Bit 10.. 6: PHY Register Address */ +#define GM_SMI_CT_OP_RD (1<<5) /* Bit 5: OpCode Read (0=Write)*/ +#define GM_SMI_CT_RD_VAL (1<<4) /* Bit 4: Read Valid (Read completed) */ +#define GM_SMI_CT_BUSY (1<<3) /* Bit 3: Busy (Operation in progress) */ + /* Bit 2..0: reserved */ + +#define GM_SMI_CT_PHY_AD(x) (SHIFT11(x) & GM_SMI_CT_PHY_A_MSK) +#define GM_SMI_CT_REG_AD(x) (SHIFT6(x) & GM_SMI_CT_REG_A_MSK) + + /* GM_PHY_ADDR 16 bit r/w GPHY Address Register */ + /* Bit 15..6: reserved */ +#define GM_PAR_MIB_CLR (1<<5) /* Bit 5: Set MIB Clear Counter Mode */ +#define GM_PAR_MIB_TST (1<<4) /* Bit 4: MIB Load Counter (Test Mode) */ + /* Bit 3..0: reserved */ + +/* Receive Frame Status Encoding */ +#define GMR_FS_LEN (0xffffUL<<16) /* Bit 31..16: Rx Frame Length */ + /* Bit 15..14: reserved */ +#define GMR_FS_VLAN (1L<<13) /* Bit 13: VLAN Packet */ +#define GMR_FS_JABBER (1L<<12) /* Bit 12: Jabber Packet */ +#define GMR_FS_UN_SIZE (1L<<11) /* Bit 11: Undersize Packet */ +#define GMR_FS_MC (1L<<10) /* Bit 10: Multicast Packet */ +#define GMR_FS_BC (1L<<9) /* Bit 9: Broadcast Packet */ +#define GMR_FS_RX_OK (1L<<8) /* Bit 8: Receive OK (Good Packet) */ +#define GMR_FS_GOOD_FC (1L<<7) /* Bit 7: Good Flow-Control Packet */ +#define GMR_FS_BAD_FC (1L<<6) /* Bit 6: Bad Flow-Control Packet */ +#define GMR_FS_MII_ERR (1L<<5) /* Bit 5: MII Error */ +#define GMR_FS_LONG_ERR (1L<<4) /* Bit 4: Too Long Packet */ +#define GMR_FS_FRAGMENT (1L<<3) /* Bit 3: Fragment */ + /* Bit 2: reserved */ +#define GMR_FS_CRC_ERR (1L<<1) /* Bit 1: CRC Error */ +#define GMR_FS_RX_FF_OV (1L<<0) /* Bit 0: Rx FIFO Overflow */ + +/* + * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR) + */ +#define GMR_FS_ANY_ERR (GMR_FS_CRC_ERR | \ + GMR_FS_LONG_ERR | \ + GMR_FS_MII_ERR | \ + GMR_FS_BAD_FC | \ + GMR_FS_GOOD_FC | \ + GMR_FS_JABBER) + +/* Rx GMAC FIFO Flush Mask (default) */ +#define RX_FF_FL_DEF_MSK (GMR_FS_CRC_ERR | \ + GMR_FS_RX_FF_OV | \ + GMR_FS_MII_ERR | \ + GMR_FS_BAD_FC | \ + GMR_FS_GOOD_FC | \ + GMR_FS_UN_SIZE | \ + GMR_FS_JABBER) + +/* typedefs *******************************************************************/ + + +/* function prototypes ********************************************************/ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_XMAC_H */ diff --git a/drivers/net/sk98lin/skaddr.c b/drivers/net/sk98lin/skaddr.c new file mode 100644 index 00000000000..6e6c56aa6d6 --- /dev/null +++ b/drivers/net/sk98lin/skaddr.c @@ -0,0 +1,1788 @@ +/****************************************************************************** + * + * Name: skaddr.c + * Project: Gigabit Ethernet Adapters, ADDR-Module + * Version: $Revision: 1.52 $ + * Date: $Date: 2003/06/02 13:46:15 $ + * Purpose: Manage Addresses (Multicast and Unicast) and Promiscuous Mode. + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This module is intended to manage multicast addresses, address override, + * and promiscuous mode on GEnesis and Yukon adapters. + * + * Address Layout: + * port address: physical MAC address + * 1st exact match: logical MAC address (GEnesis only) + * 2nd exact match: RLMT multicast (GEnesis only) + * exact match 3-13: OS-specific multicasts (GEnesis only) + * + * Include File Hierarchy: + * + * "skdrv1st.h" + * "skdrv2nd.h" + * + ******************************************************************************/ + +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: skaddr.c,v 1.52 2003/06/02 13:46:15 tschilli Exp $ (C) Marvell."; +#endif /* DEBUG ||!LINT || !SK_SLIM */ + +#define __SKADDR_C + +#ifdef __cplusplus +extern "C" { +#endif /* cplusplus */ + +#include "h/skdrv1st.h" +#include "h/skdrv2nd.h" + +/* defines ********************************************************************/ + + +#define XMAC_POLY 0xEDB88320UL /* CRC32-Poly - XMAC: Little Endian */ +#define GMAC_POLY 0x04C11DB7L /* CRC16-Poly - GMAC: Little Endian */ +#define HASH_BITS 6 /* #bits in hash */ +#define SK_MC_BIT 0x01 + +/* Error numbers and messages. */ + +#define SKERR_ADDR_E001 (SK_ERRBASE_ADDR + 0) +#define SKERR_ADDR_E001MSG "Bad Flags." +#define SKERR_ADDR_E002 (SKERR_ADDR_E001 + 1) +#define SKERR_ADDR_E002MSG "New Error." + +/* typedefs *******************************************************************/ + +/* None. */ + +/* global variables ***********************************************************/ + +/* 64-bit hash values with all bits set. */ + +static const SK_U16 OnesHash[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF}; + +/* local variables ************************************************************/ + +#ifdef DEBUG +static int Next0[SK_MAX_MACS] = {0}; +#endif /* DEBUG */ + +static int SkAddrGmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, + SK_MAC_ADDR *pMc, int Flags); +static int SkAddrGmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, + int Flags); +static int SkAddrGmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber); +static int SkAddrGmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC, + SK_U32 PortNumber, int NewPromMode); +static int SkAddrXmacMcAdd(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, + SK_MAC_ADDR *pMc, int Flags); +static int SkAddrXmacMcClear(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, + int Flags); +static int SkAddrXmacMcUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber); +static int SkAddrXmacPromiscuousChange(SK_AC *pAC, SK_IOC IoC, + SK_U32 PortNumber, int NewPromMode); + +/* functions ******************************************************************/ + +/****************************************************************************** + * + * SkAddrInit - initialize data, set state to init + * + * Description: + * + * SK_INIT_DATA + * ============ + * + * This routine clears the multicast tables and resets promiscuous mode. + * Some entries are reserved for the "logical MAC address", the + * SK-RLMT multicast address, and the BPDU multicast address. + * + * + * SK_INIT_IO + * ========== + * + * All permanent MAC addresses are read from EPROM. + * If the current MAC addresses are not already set in software, + * they are set to the values of the permanent addresses. + * The current addresses are written to the corresponding MAC. + * + * + * SK_INIT_RUN + * =========== + * + * Nothing. + * + * Context: + * init, pageable + * + * Returns: + * SK_ADDR_SUCCESS + */ +int SkAddrInit( +SK_AC *pAC, /* the adapter context */ +SK_IOC IoC, /* I/O context */ +int Level) /* initialization level */ +{ + int j; + SK_U32 i; + SK_U8 *InAddr; + SK_U16 *OutAddr; + SK_ADDR_PORT *pAPort; + + switch (Level) { + case SK_INIT_DATA: + SK_MEMSET((char *) &pAC->Addr, (SK_U8) 0, + (SK_U16) sizeof(SK_ADDR)); + + for (i = 0; i < SK_MAX_MACS; i++) { + pAPort = &pAC->Addr.Port[i]; + pAPort->PromMode = SK_PROM_MODE_NONE; + + pAPort->FirstExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT; + pAPort->FirstExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV; + pAPort->NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT; + pAPort->NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV; + } +#ifdef xDEBUG + for (i = 0; i < SK_MAX_MACS; i++) { + if (pAC->Addr.Port[i].NextExactMatchRlmt < + SK_ADDR_FIRST_MATCH_RLMT) { + Next0[i] |= 4; + } + } +#endif /* DEBUG */ + /* pAC->Addr.InitDone = SK_INIT_DATA; */ + break; + + case SK_INIT_IO: +#ifndef SK_NO_RLMT + for (i = 0; i < SK_MAX_NETS; i++) { + pAC->Addr.Net[i].ActivePort = pAC->Rlmt.Net[i].ActivePort; + } +#endif /* !SK_NO_RLMT */ +#ifdef xDEBUG + for (i = 0; i < SK_MAX_MACS; i++) { + if (pAC->Addr.Port[i].NextExactMatchRlmt < + SK_ADDR_FIRST_MATCH_RLMT) { + Next0[i] |= 8; + } + } +#endif /* DEBUG */ + + /* Read permanent logical MAC address from Control Register File. */ + for (j = 0; j < SK_MAC_ADDR_LEN; j++) { + InAddr = (SK_U8 *) &pAC->Addr.Net[0].PermanentMacAddress.a[j]; + SK_IN8(IoC, B2_MAC_1 + j, InAddr); + } + + if (!pAC->Addr.Net[0].CurrentMacAddressSet) { + /* Set the current logical MAC address to the permanent one. */ + pAC->Addr.Net[0].CurrentMacAddress = + pAC->Addr.Net[0].PermanentMacAddress; + pAC->Addr.Net[0].CurrentMacAddressSet = SK_TRUE; + } + + /* Set the current logical MAC address. */ + pAC->Addr.Port[pAC->Addr.Net[0].ActivePort].Exact[0] = + pAC->Addr.Net[0].CurrentMacAddress; +#if SK_MAX_NETS > 1 + /* Set logical MAC address for net 2 to (log | 3). */ + if (!pAC->Addr.Net[1].CurrentMacAddressSet) { + pAC->Addr.Net[1].PermanentMacAddress = + pAC->Addr.Net[0].PermanentMacAddress; + pAC->Addr.Net[1].PermanentMacAddress.a[5] |= 3; + /* Set the current logical MAC address to the permanent one. */ + pAC->Addr.Net[1].CurrentMacAddress = + pAC->Addr.Net[1].PermanentMacAddress; + pAC->Addr.Net[1].CurrentMacAddressSet = SK_TRUE; + } +#endif /* SK_MAX_NETS > 1 */ + +#ifdef DEBUG + for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT, + ("Permanent MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n", + i, + pAC->Addr.Net[i].PermanentMacAddress.a[0], + pAC->Addr.Net[i].PermanentMacAddress.a[1], + pAC->Addr.Net[i].PermanentMacAddress.a[2], + pAC->Addr.Net[i].PermanentMacAddress.a[3], + pAC->Addr.Net[i].PermanentMacAddress.a[4], + pAC->Addr.Net[i].PermanentMacAddress.a[5])) + + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT, + ("Logical MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n", + i, + pAC->Addr.Net[i].CurrentMacAddress.a[0], + pAC->Addr.Net[i].CurrentMacAddress.a[1], + pAC->Addr.Net[i].CurrentMacAddress.a[2], + pAC->Addr.Net[i].CurrentMacAddress.a[3], + pAC->Addr.Net[i].CurrentMacAddress.a[4], + pAC->Addr.Net[i].CurrentMacAddress.a[5])) + } +#endif /* DEBUG */ + + for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { + pAPort = &pAC->Addr.Port[i]; + + /* Read permanent port addresses from Control Register File. */ + for (j = 0; j < SK_MAC_ADDR_LEN; j++) { + InAddr = (SK_U8 *) &pAPort->PermanentMacAddress.a[j]; + SK_IN8(IoC, B2_MAC_2 + 8 * i + j, InAddr); + } + + if (!pAPort->CurrentMacAddressSet) { + /* + * Set the current and previous physical MAC address + * of this port to its permanent MAC address. + */ + pAPort->CurrentMacAddress = pAPort->PermanentMacAddress; + pAPort->PreviousMacAddress = pAPort->PermanentMacAddress; + pAPort->CurrentMacAddressSet = SK_TRUE; + } + + /* Set port's current physical MAC address. */ + OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0]; +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + XM_OUTADDR(IoC, i, XM_SA, OutAddr); + } +#endif /* GENESIS */ +#ifdef YUKON + if (!pAC->GIni.GIGenesis) { + GM_OUTADDR(IoC, i, GM_SRC_ADDR_1L, OutAddr); + } +#endif /* YUKON */ +#ifdef DEBUG + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT, + ("SkAddrInit: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n", + pAPort->PermanentMacAddress.a[0], + pAPort->PermanentMacAddress.a[1], + pAPort->PermanentMacAddress.a[2], + pAPort->PermanentMacAddress.a[3], + pAPort->PermanentMacAddress.a[4], + pAPort->PermanentMacAddress.a[5])) + + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT, + ("SkAddrInit: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n", + pAPort->CurrentMacAddress.a[0], + pAPort->CurrentMacAddress.a[1], + pAPort->CurrentMacAddress.a[2], + pAPort->CurrentMacAddress.a[3], + pAPort->CurrentMacAddress.a[4], + pAPort->CurrentMacAddress.a[5])) +#endif /* DEBUG */ + } + /* pAC->Addr.InitDone = SK_INIT_IO; */ + break; + + case SK_INIT_RUN: +#ifdef xDEBUG + for (i = 0; i < SK_MAX_MACS; i++) { + if (pAC->Addr.Port[i].NextExactMatchRlmt < + SK_ADDR_FIRST_MATCH_RLMT) { + Next0[i] |= 16; + } + } +#endif /* DEBUG */ + + /* pAC->Addr.InitDone = SK_INIT_RUN; */ + break; + + default: /* error */ + break; + } + + return (SK_ADDR_SUCCESS); + +} /* SkAddrInit */ + +#ifndef SK_SLIM + +/****************************************************************************** + * + * SkAddrMcClear - clear the multicast table + * + * Description: + * This routine clears the multicast table. + * + * If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated + * immediately. + * + * It calls either SkAddrXmacMcClear or SkAddrGmacMcClear, according + * to the adapter in use. The real work is done there. + * + * Context: + * runtime, pageable + * may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY + * may be called after SK_INIT_IO without limitation + * + * Returns: + * SK_ADDR_SUCCESS + * SK_ADDR_ILLEGAL_PORT + */ +int SkAddrMcClear( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* Index of affected port */ +int Flags) /* permanent/non-perm, sw-only */ +{ + int ReturnCode; + + if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { + return (SK_ADDR_ILLEGAL_PORT); + } + + if (pAC->GIni.GIGenesis) { + ReturnCode = SkAddrXmacMcClear(pAC, IoC, PortNumber, Flags); + } + else { + ReturnCode = SkAddrGmacMcClear(pAC, IoC, PortNumber, Flags); + } + + return (ReturnCode); + +} /* SkAddrMcClear */ + +#endif /* !SK_SLIM */ + +#ifndef SK_SLIM + +/****************************************************************************** + * + * SkAddrXmacMcClear - clear the multicast table + * + * Description: + * This routine clears the multicast table + * (either entry 2 or entries 3-16 and InexactFilter) of the given port. + * If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated + * immediately. + * + * Context: + * runtime, pageable + * may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY + * may be called after SK_INIT_IO without limitation + * + * Returns: + * SK_ADDR_SUCCESS + * SK_ADDR_ILLEGAL_PORT + */ +static int SkAddrXmacMcClear( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* Index of affected port */ +int Flags) /* permanent/non-perm, sw-only */ +{ + int i; + + if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */ + + /* Clear RLMT multicast addresses. */ + pAC->Addr.Port[PortNumber].NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT; + } + else { /* not permanent => DRV */ + + /* Clear InexactFilter */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0; + } + + /* Clear DRV multicast addresses. */ + + pAC->Addr.Port[PortNumber].NextExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV; + } + + if (!(Flags & SK_MC_SW_ONLY)) { + (void) SkAddrXmacMcUpdate(pAC, IoC, PortNumber); + } + + return (SK_ADDR_SUCCESS); + +} /* SkAddrXmacMcClear */ + +#endif /* !SK_SLIM */ + +#ifndef SK_SLIM + +/****************************************************************************** + * + * SkAddrGmacMcClear - clear the multicast table + * + * Description: + * This routine clears the multicast hashing table (InexactFilter) + * (either the RLMT or the driver bits) of the given port. + * + * If not suppressed by Flag SK_MC_SW_ONLY, the hardware is updated + * immediately. + * + * Context: + * runtime, pageable + * may be called starting with SK_INIT_DATA with flag SK_MC_SW_ONLY + * may be called after SK_INIT_IO without limitation + * + * Returns: + * SK_ADDR_SUCCESS + * SK_ADDR_ILLEGAL_PORT + */ +static int SkAddrGmacMcClear( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* Index of affected port */ +int Flags) /* permanent/non-perm, sw-only */ +{ + int i; + +#ifdef DEBUG + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("GMAC InexactFilter (not cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n", + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7])) +#endif /* DEBUG */ + + /* Clear InexactFilter */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0; + } + + if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */ + + /* Copy DRV bits to InexactFilter. */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i]; + + /* Clear InexactRlmtFilter. */ + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i] = 0; + + } + } + else { /* not permanent => DRV */ + + /* Copy RLMT bits to InexactFilter. */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i]; + + /* Clear InexactDrvFilter. */ + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i] = 0; + } + } + +#ifdef DEBUG + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("GMAC InexactFilter (cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n", + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[1], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[2], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[3], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[4], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[5], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6], + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7])) +#endif /* DEBUG */ + + if (!(Flags & SK_MC_SW_ONLY)) { + (void) SkAddrGmacMcUpdate(pAC, IoC, PortNumber); + } + + return (SK_ADDR_SUCCESS); + +} /* SkAddrGmacMcClear */ + +#ifndef SK_ADDR_CHEAT + +/****************************************************************************** + * + * SkXmacMcHash - hash multicast address + * + * Description: + * This routine computes the hash value for a multicast address. + * A CRC32 algorithm is used. + * + * Notes: + * The code was adapted from the XaQti data sheet. + * + * Context: + * runtime, pageable + * + * Returns: + * Hash value of multicast address. + */ +static SK_U32 SkXmacMcHash( +unsigned char *pMc) /* Multicast address */ +{ + SK_U32 Idx; + SK_U32 Bit; + SK_U32 Data; + SK_U32 Crc; + + Crc = 0xFFFFFFFFUL; + for (Idx = 0; Idx < SK_MAC_ADDR_LEN; Idx++) { + Data = *pMc++; + for (Bit = 0; Bit < 8; Bit++, Data >>= 1) { + Crc = (Crc >> 1) ^ (((Crc ^ Data) & 1) ? XMAC_POLY : 0); + } + } + + return (Crc & ((1 << HASH_BITS) - 1)); + +} /* SkXmacMcHash */ + + +/****************************************************************************** + * + * SkGmacMcHash - hash multicast address + * + * Description: + * This routine computes the hash value for a multicast address. + * A CRC16 algorithm is used. + * + * Notes: + * + * + * Context: + * runtime, pageable + * + * Returns: + * Hash value of multicast address. + */ +static SK_U32 SkGmacMcHash( +unsigned char *pMc) /* Multicast address */ +{ + SK_U32 Data; + SK_U32 TmpData; + SK_U32 Crc; + int Byte; + int Bit; + + Crc = 0xFFFFFFFFUL; + for (Byte = 0; Byte < 6; Byte++) { + /* Get next byte. */ + Data = (SK_U32) pMc[Byte]; + + /* Change bit order in byte. */ + TmpData = Data; + for (Bit = 0; Bit < 8; Bit++) { + if (TmpData & 1L) { + Data |= 1L << (7 - Bit); + } + else { + Data &= ~(1L << (7 - Bit)); + } + TmpData >>= 1; + } + + Crc ^= (Data << 24); + for (Bit = 0; Bit < 8; Bit++) { + if (Crc & 0x80000000) { + Crc = (Crc << 1) ^ GMAC_POLY; + } + else { + Crc <<= 1; + } + } + } + + return (Crc & ((1 << HASH_BITS) - 1)); + +} /* SkGmacMcHash */ + +#endif /* !SK_ADDR_CHEAT */ + +/****************************************************************************** + * + * SkAddrMcAdd - add a multicast address to a port + * + * Description: + * This routine enables reception for a given address on the given port. + * + * It calls either SkAddrXmacMcAdd or SkAddrGmacMcAdd, according to the + * adapter in use. The real work is done there. + * + * Notes: + * The return code is only valid for SK_PROM_MODE_NONE. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_DATA + * + * Returns: + * SK_MC_FILTERING_EXACT + * SK_MC_FILTERING_INEXACT + * SK_MC_ILLEGAL_ADDRESS + * SK_MC_ILLEGAL_PORT + * SK_MC_RLMT_OVERFLOW + */ +int SkAddrMcAdd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* Port Number */ +SK_MAC_ADDR *pMc, /* multicast address to be added */ +int Flags) /* permanent/non-permanent */ +{ + int ReturnCode; + + if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { + return (SK_ADDR_ILLEGAL_PORT); + } + + if (pAC->GIni.GIGenesis) { + ReturnCode = SkAddrXmacMcAdd(pAC, IoC, PortNumber, pMc, Flags); + } + else { + ReturnCode = SkAddrGmacMcAdd(pAC, IoC, PortNumber, pMc, Flags); + } + + return (ReturnCode); + +} /* SkAddrMcAdd */ + + +/****************************************************************************** + * + * SkAddrXmacMcAdd - add a multicast address to a port + * + * Description: + * This routine enables reception for a given address on the given port. + * + * Notes: + * The return code is only valid for SK_PROM_MODE_NONE. + * + * The multicast bit is only checked if there are no free exact match + * entries. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_DATA + * + * Returns: + * SK_MC_FILTERING_EXACT + * SK_MC_FILTERING_INEXACT + * SK_MC_ILLEGAL_ADDRESS + * SK_MC_RLMT_OVERFLOW + */ +static int SkAddrXmacMcAdd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* Port Number */ +SK_MAC_ADDR *pMc, /* multicast address to be added */ +int Flags) /* permanent/non-permanent */ +{ + int i; + SK_U8 Inexact; +#ifndef SK_ADDR_CHEAT + SK_U32 HashBit; +#endif /* !defined(SK_ADDR_CHEAT) */ + + if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */ +#ifdef xDEBUG + if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt < + SK_ADDR_FIRST_MATCH_RLMT) { + Next0[PortNumber] |= 1; + return (SK_MC_RLMT_OVERFLOW); + } +#endif /* DEBUG */ + + if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt > + SK_ADDR_LAST_MATCH_RLMT) { + return (SK_MC_RLMT_OVERFLOW); + } + + /* Set a RLMT multicast address. */ + + pAC->Addr.Port[PortNumber].Exact[ + pAC->Addr.Port[PortNumber].NextExactMatchRlmt++] = *pMc; + + return (SK_MC_FILTERING_EXACT); + } + +#ifdef xDEBUG + if (pAC->Addr.Port[PortNumber].NextExactMatchDrv < + SK_ADDR_FIRST_MATCH_DRV) { + Next0[PortNumber] |= 2; + return (SK_MC_RLMT_OVERFLOW); + } +#endif /* DEBUG */ + + if (pAC->Addr.Port[PortNumber].NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) { + + /* Set exact match entry. */ + pAC->Addr.Port[PortNumber].Exact[ + pAC->Addr.Port[PortNumber].NextExactMatchDrv++] = *pMc; + + /* Clear InexactFilter */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0; + } + } + else { + if (!(pMc->a[0] & SK_MC_BIT)) { + /* Hashing only possible with multicast addresses */ + return (SK_MC_ILLEGAL_ADDRESS); + } +#ifndef SK_ADDR_CHEAT + /* Compute hash value of address. */ + HashBit = 63 - SkXmacMcHash(&pMc->a[0]); + + /* Add bit to InexactFilter. */ + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[HashBit / 8] |= + 1 << (HashBit % 8); +#else /* SK_ADDR_CHEAT */ + /* Set all bits in InexactFilter. */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF; + } +#endif /* SK_ADDR_CHEAT */ + } + + for (Inexact = 0, i = 0; i < 8; i++) { + Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i]; + } + + if (Inexact == 0 && pAC->Addr.Port[PortNumber].PromMode == 0) { + return (SK_MC_FILTERING_EXACT); + } + else { + return (SK_MC_FILTERING_INEXACT); + } + +} /* SkAddrXmacMcAdd */ + + +/****************************************************************************** + * + * SkAddrGmacMcAdd - add a multicast address to a port + * + * Description: + * This routine enables reception for a given address on the given port. + * + * Notes: + * The return code is only valid for SK_PROM_MODE_NONE. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_DATA + * + * Returns: + * SK_MC_FILTERING_INEXACT + * SK_MC_ILLEGAL_ADDRESS + */ +static int SkAddrGmacMcAdd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* Port Number */ +SK_MAC_ADDR *pMc, /* multicast address to be added */ +int Flags) /* permanent/non-permanent */ +{ + int i; +#ifndef SK_ADDR_CHEAT + SK_U32 HashBit; +#endif /* !defined(SK_ADDR_CHEAT) */ + + if (!(pMc->a[0] & SK_MC_BIT)) { + /* Hashing only possible with multicast addresses */ + return (SK_MC_ILLEGAL_ADDRESS); + } + +#ifndef SK_ADDR_CHEAT + + /* Compute hash value of address. */ + HashBit = SkGmacMcHash(&pMc->a[0]); + + if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */ + + /* Add bit to InexactRlmtFilter. */ + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[HashBit / 8] |= + 1 << (HashBit % 8); + + /* Copy bit to InexactFilter. */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i]; + } +#ifdef DEBUG + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("GMAC InexactRlmtFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n", + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[0], + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[1], + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[2], + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[3], + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[4], + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[5], + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[6], + pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[7])) +#endif /* DEBUG */ + } + else { /* not permanent => DRV */ + + /* Add bit to InexactDrvFilter. */ + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[HashBit / 8] |= + 1 << (HashBit % 8); + + /* Copy bit to InexactFilter. */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i]; + } +#ifdef DEBUG + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("GMAC InexactDrvFilter: %02X %02X %02X %02X %02X %02X %02X %02X\n", + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[0], + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[1], + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[2], + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[3], + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[4], + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[5], + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[6], + pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[7])) +#endif /* DEBUG */ + } + +#else /* SK_ADDR_CHEAT */ + + /* Set all bits in InexactFilter. */ + for (i = 0; i < 8; i++) { + pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF; + } +#endif /* SK_ADDR_CHEAT */ + + return (SK_MC_FILTERING_INEXACT); + +} /* SkAddrGmacMcAdd */ + +#endif /* !SK_SLIM */ + +/****************************************************************************** + * + * SkAddrMcUpdate - update the HW MC address table and set the MAC address + * + * Description: + * This routine enables reception of the addresses contained in a local + * table for a given port. + * It also programs the port's current physical MAC address. + * + * It calls either SkAddrXmacMcUpdate or SkAddrGmacMcUpdate, according + * to the adapter in use. The real work is done there. + * + * Notes: + * The return code is only valid for SK_PROM_MODE_NONE. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_MC_FILTERING_EXACT + * SK_MC_FILTERING_INEXACT + * SK_ADDR_ILLEGAL_PORT + */ +int SkAddrMcUpdate( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber) /* Port Number */ +{ + int ReturnCode = 0; +#if (!defined(SK_SLIM) || defined(DEBUG)) + if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { + return (SK_ADDR_ILLEGAL_PORT); + } +#endif /* !SK_SLIM || DEBUG */ + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + ReturnCode = SkAddrXmacMcUpdate(pAC, IoC, PortNumber); + } +#endif /* GENESIS */ +#ifdef YUKON + if (!pAC->GIni.GIGenesis) { + ReturnCode = SkAddrGmacMcUpdate(pAC, IoC, PortNumber); + } +#endif /* YUKON */ + return (ReturnCode); + +} /* SkAddrMcUpdate */ + + +#ifdef GENESIS + +/****************************************************************************** + * + * SkAddrXmacMcUpdate - update the HW MC address table and set the MAC address + * + * Description: + * This routine enables reception of the addresses contained in a local + * table for a given port. + * It also programs the port's current physical MAC address. + * + * Notes: + * The return code is only valid for SK_PROM_MODE_NONE. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_MC_FILTERING_EXACT + * SK_MC_FILTERING_INEXACT + * SK_ADDR_ILLEGAL_PORT + */ +static int SkAddrXmacMcUpdate( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber) /* Port Number */ +{ + SK_U32 i; + SK_U8 Inexact; + SK_U16 *OutAddr; + SK_ADDR_PORT *pAPort; + + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("SkAddrXmacMcUpdate on Port %u.\n", PortNumber)) + + pAPort = &pAC->Addr.Port[PortNumber]; + +#ifdef DEBUG + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber])) +#endif /* DEBUG */ + + /* Start with 0 to also program the logical MAC address. */ + for (i = 0; i < pAPort->NextExactMatchRlmt; i++) { + /* Set exact match address i on XMAC */ + OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0]; + XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr); + } + + /* Clear other permanent exact match addresses on XMAC */ + if (pAPort->NextExactMatchRlmt <= SK_ADDR_LAST_MATCH_RLMT) { + + SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchRlmt, + SK_ADDR_LAST_MATCH_RLMT); + } + + for (i = pAPort->FirstExactMatchDrv; i < pAPort->NextExactMatchDrv; i++) { + OutAddr = (SK_U16 *) &pAPort->Exact[i].a[0]; + XM_OUTADDR(IoC, PortNumber, XM_EXM(i), OutAddr); + } + + /* Clear other non-permanent exact match addresses on XMAC */ + if (pAPort->NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) { + + SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchDrv, + SK_ADDR_LAST_MATCH_DRV); + } + + for (Inexact = 0, i = 0; i < 8; i++) { + Inexact |= pAPort->InexactFilter.Bytes[i]; + } + + if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) { + + /* Set all bits in 64-bit hash register. */ + XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash); + + /* Enable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + else if (Inexact != 0) { + + /* Set 64-bit hash register to InexactFilter. */ + XM_OUTHASH(IoC, PortNumber, XM_HSM, &pAPort->InexactFilter.Bytes[0]); + + /* Enable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + else { + /* Disable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_FALSE); + } + + if (pAPort->PromMode != SK_PROM_MODE_NONE) { + (void) SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode); + } + + /* Set port's current physical MAC address. */ + OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0]; + + XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr); + +#ifdef xDEBUG + for (i = 0; i < pAPort->NextExactMatchRlmt; i++) { + SK_U8 InAddr8[6]; + SK_U16 *InAddr; + + /* Get exact match address i from port PortNumber. */ + InAddr = (SK_U16 *) &InAddr8[0]; + + XM_INADDR(IoC, PortNumber, XM_EXM(i), InAddr); + + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("SkAddrXmacMcUpdate: MC address %d on Port %u: ", + "%02x %02x %02x %02x %02x %02x -- %02x %02x %02x %02x %02x %02x\n", + i, + PortNumber, + InAddr8[0], + InAddr8[1], + InAddr8[2], + InAddr8[3], + InAddr8[4], + InAddr8[5], + pAPort->Exact[i].a[0], + pAPort->Exact[i].a[1], + pAPort->Exact[i].a[2], + pAPort->Exact[i].a[3], + pAPort->Exact[i].a[4], + pAPort->Exact[i].a[5])) + } +#endif /* DEBUG */ + + /* Determine return value. */ + if (Inexact == 0 && pAPort->PromMode == 0) { + return (SK_MC_FILTERING_EXACT); + } + else { + return (SK_MC_FILTERING_INEXACT); + } + +} /* SkAddrXmacMcUpdate */ + +#endif /* GENESIS */ + +#ifdef YUKON + +/****************************************************************************** + * + * SkAddrGmacMcUpdate - update the HW MC address table and set the MAC address + * + * Description: + * This routine enables reception of the addresses contained in a local + * table for a given port. + * It also programs the port's current physical MAC address. + * + * Notes: + * The return code is only valid for SK_PROM_MODE_NONE. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_MC_FILTERING_EXACT + * SK_MC_FILTERING_INEXACT + * SK_ADDR_ILLEGAL_PORT + */ +static int SkAddrGmacMcUpdate( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber) /* Port Number */ +{ +#ifndef SK_SLIM + SK_U32 i; + SK_U8 Inexact; +#endif /* not SK_SLIM */ + SK_U16 *OutAddr; + SK_ADDR_PORT *pAPort; + + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("SkAddrGmacMcUpdate on Port %u.\n", PortNumber)) + + pAPort = &pAC->Addr.Port[PortNumber]; + +#ifdef DEBUG + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber])) +#endif /* DEBUG */ + +#ifndef SK_SLIM + for (Inexact = 0, i = 0; i < 8; i++) { + Inexact |= pAPort->InexactFilter.Bytes[i]; + } + + /* Set 64-bit hash register to InexactFilter. */ + GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, + &pAPort->InexactFilter.Bytes[0]); + + if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) { + + /* Set all bits in 64-bit hash register. */ + GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash); + + /* Enable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + else { + /* Enable Hashing. */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + + if (pAPort->PromMode != SK_PROM_MODE_NONE) { + (void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode); + } +#else /* SK_SLIM */ + + /* Set all bits in 64-bit hash register. */ + GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash); + + /* Enable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + + (void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode); + +#endif /* SK_SLIM */ + + /* Set port's current physical MAC address. */ + OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0]; + GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr); + + /* Set port's current logical MAC address. */ + OutAddr = (SK_U16 *) &pAPort->Exact[0].a[0]; + GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_2L, OutAddr); + +#ifdef DEBUG + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("SkAddrGmacMcUpdate: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n", + pAPort->Exact[0].a[0], + pAPort->Exact[0].a[1], + pAPort->Exact[0].a[2], + pAPort->Exact[0].a[3], + pAPort->Exact[0].a[4], + pAPort->Exact[0].a[5])) + + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("SkAddrGmacMcUpdate: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n", + pAPort->CurrentMacAddress.a[0], + pAPort->CurrentMacAddress.a[1], + pAPort->CurrentMacAddress.a[2], + pAPort->CurrentMacAddress.a[3], + pAPort->CurrentMacAddress.a[4], + pAPort->CurrentMacAddress.a[5])) +#endif /* DEBUG */ + +#ifndef SK_SLIM + /* Determine return value. */ + if (Inexact == 0 && pAPort->PromMode == 0) { + return (SK_MC_FILTERING_EXACT); + } + else { + return (SK_MC_FILTERING_INEXACT); + } +#else /* SK_SLIM */ + return (SK_MC_FILTERING_INEXACT); +#endif /* SK_SLIM */ + +} /* SkAddrGmacMcUpdate */ + +#endif /* YUKON */ + +#ifndef SK_NO_MAO + +/****************************************************************************** + * + * SkAddrOverride - override a port's MAC address + * + * Description: + * This routine overrides the MAC address of one port. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_ADDR_SUCCESS if successful. + * SK_ADDR_DUPLICATE_ADDRESS if duplicate MAC address. + * SK_ADDR_MULTICAST_ADDRESS if multicast or broadcast address. + * SK_ADDR_TOO_EARLY if SK_INIT_IO was not executed before. + */ +int SkAddrOverride( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* Port Number */ +SK_MAC_ADDR SK_FAR *pNewAddr, /* new MAC address */ +int Flags) /* logical/physical MAC address */ +{ +#ifndef SK_NO_RLMT + SK_EVPARA Para; +#endif /* !SK_NO_RLMT */ + SK_U32 NetNumber; + SK_U32 i; + SK_U16 SK_FAR *OutAddr; + +#ifndef SK_NO_RLMT + NetNumber = pAC->Rlmt.Port[PortNumber].Net->NetNumber; +#else + NetNumber = 0; +#endif /* SK_NO_RLMT */ +#if (!defined(SK_SLIM) || defined(DEBUG)) + if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { + return (SK_ADDR_ILLEGAL_PORT); + } +#endif /* !SK_SLIM || DEBUG */ + if (pNewAddr != NULL && (pNewAddr->a[0] & SK_MC_BIT) != 0) { + return (SK_ADDR_MULTICAST_ADDRESS); + } + + if (!pAC->Addr.Net[NetNumber].CurrentMacAddressSet) { + return (SK_ADDR_TOO_EARLY); + } + + if (Flags & SK_ADDR_SET_LOGICAL) { /* Activate logical MAC address. */ + /* Parameter *pNewAddr is ignored. */ + for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { + if (!pAC->Addr.Port[i].CurrentMacAddressSet) { + return (SK_ADDR_TOO_EARLY); + } + } +#ifndef SK_NO_RLMT + /* Set PortNumber to number of net's active port. */ + PortNumber = pAC->Rlmt.Net[NetNumber]. + Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber; +#endif /* !SK_NO_RLMT */ + pAC->Addr.Port[PortNumber].Exact[0] = + pAC->Addr.Net[NetNumber].CurrentMacAddress; + + /* Write address to first exact match entry of active port. */ + (void) SkAddrMcUpdate(pAC, IoC, PortNumber); + } + else if (Flags & SK_ADDR_CLEAR_LOGICAL) { + /* Deactivate logical MAC address. */ + /* Parameter *pNewAddr is ignored. */ + for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { + if (!pAC->Addr.Port[i].CurrentMacAddressSet) { + return (SK_ADDR_TOO_EARLY); + } + } +#ifndef SK_NO_RLMT + /* Set PortNumber to number of net's active port. */ + PortNumber = pAC->Rlmt.Net[NetNumber]. + Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber; +#endif /* !SK_NO_RLMT */ + for (i = 0; i < SK_MAC_ADDR_LEN; i++ ) { + pAC->Addr.Port[PortNumber].Exact[0].a[i] = 0; + } + + /* Write address to first exact match entry of active port. */ + (void) SkAddrMcUpdate(pAC, IoC, PortNumber); + } + else if (Flags & SK_ADDR_PHYSICAL_ADDRESS) { /* Physical MAC address. */ + if (SK_ADDR_EQUAL(pNewAddr->a, + pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) { + return (SK_ADDR_DUPLICATE_ADDRESS); + } + + for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { + if (!pAC->Addr.Port[i].CurrentMacAddressSet) { + return (SK_ADDR_TOO_EARLY); + } + + if (SK_ADDR_EQUAL(pNewAddr->a, + pAC->Addr.Port[i].CurrentMacAddress.a)) { + if (i == PortNumber) { + return (SK_ADDR_SUCCESS); + } + else { + return (SK_ADDR_DUPLICATE_ADDRESS); + } + } + } + + pAC->Addr.Port[PortNumber].PreviousMacAddress = + pAC->Addr.Port[PortNumber].CurrentMacAddress; + pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr; + + /* Change port's physical MAC address. */ + OutAddr = (SK_U16 SK_FAR *) pNewAddr; +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr); + } +#endif /* GENESIS */ +#ifdef YUKON + if (!pAC->GIni.GIGenesis) { + GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr); + } +#endif /* YUKON */ + +#ifndef SK_NO_RLMT + /* Report address change to RLMT. */ + Para.Para32[0] = PortNumber; + Para.Para32[0] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para); +#endif /* !SK_NO_RLMT */ + } + else { /* Logical MAC address. */ + if (SK_ADDR_EQUAL(pNewAddr->a, + pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) { + return (SK_ADDR_SUCCESS); + } + + for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { + if (!pAC->Addr.Port[i].CurrentMacAddressSet) { + return (SK_ADDR_TOO_EARLY); + } + + if (SK_ADDR_EQUAL(pNewAddr->a, + pAC->Addr.Port[i].CurrentMacAddress.a)) { + return (SK_ADDR_DUPLICATE_ADDRESS); + } + } + + /* + * In case that the physical and the logical MAC addresses are equal + * we must also change the physical MAC address here. + * In this case we have an adapter which initially was programmed with + * two identical MAC addresses. + */ + if (SK_ADDR_EQUAL(pAC->Addr.Port[PortNumber].CurrentMacAddress.a, + pAC->Addr.Port[PortNumber].Exact[0].a)) { + + pAC->Addr.Port[PortNumber].PreviousMacAddress = + pAC->Addr.Port[PortNumber].CurrentMacAddress; + pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr; + +#ifndef SK_NO_RLMT + /* Report address change to RLMT. */ + Para.Para32[0] = PortNumber; + Para.Para32[0] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para); +#endif /* !SK_NO_RLMT */ + } + +#ifndef SK_NO_RLMT + /* Set PortNumber to number of net's active port. */ + PortNumber = pAC->Rlmt.Net[NetNumber]. + Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber; +#endif /* !SK_NO_RLMT */ + pAC->Addr.Net[NetNumber].CurrentMacAddress = *pNewAddr; + pAC->Addr.Port[PortNumber].Exact[0] = *pNewAddr; +#ifdef DEBUG + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("SkAddrOverride: Permanent MAC Address: %02X %02X %02X %02X %02X %02X\n", + pAC->Addr.Net[NetNumber].PermanentMacAddress.a[0], + pAC->Addr.Net[NetNumber].PermanentMacAddress.a[1], + pAC->Addr.Net[NetNumber].PermanentMacAddress.a[2], + pAC->Addr.Net[NetNumber].PermanentMacAddress.a[3], + pAC->Addr.Net[NetNumber].PermanentMacAddress.a[4], + pAC->Addr.Net[NetNumber].PermanentMacAddress.a[5])) + + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, + ("SkAddrOverride: New logical MAC Address: %02X %02X %02X %02X %02X %02X\n", + pAC->Addr.Net[NetNumber].CurrentMacAddress.a[0], + pAC->Addr.Net[NetNumber].CurrentMacAddress.a[1], + pAC->Addr.Net[NetNumber].CurrentMacAddress.a[2], + pAC->Addr.Net[NetNumber].CurrentMacAddress.a[3], + pAC->Addr.Net[NetNumber].CurrentMacAddress.a[4], + pAC->Addr.Net[NetNumber].CurrentMacAddress.a[5])) +#endif /* DEBUG */ + + /* Write address to first exact match entry of active port. */ + (void) SkAddrMcUpdate(pAC, IoC, PortNumber); + } + + return (SK_ADDR_SUCCESS); + +} /* SkAddrOverride */ + + +#endif /* SK_NO_MAO */ + +/****************************************************************************** + * + * SkAddrPromiscuousChange - set promiscuous mode for given port + * + * Description: + * This routine manages promiscuous mode: + * - none + * - all LLC frames + * - all MC frames + * + * It calls either SkAddrXmacPromiscuousChange or + * SkAddrGmacPromiscuousChange, according to the adapter in use. + * The real work is done there. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_ADDR_SUCCESS + * SK_ADDR_ILLEGAL_PORT + */ +int SkAddrPromiscuousChange( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* port whose promiscuous mode changes */ +int NewPromMode) /* new promiscuous mode */ +{ + int ReturnCode = 0; +#if (!defined(SK_SLIM) || defined(DEBUG)) + if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { + return (SK_ADDR_ILLEGAL_PORT); + } +#endif /* !SK_SLIM || DEBUG */ + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + ReturnCode = + SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode); + } +#endif /* GENESIS */ +#ifdef YUKON + if (!pAC->GIni.GIGenesis) { + ReturnCode = + SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode); + } +#endif /* YUKON */ + + return (ReturnCode); + +} /* SkAddrPromiscuousChange */ + +#ifdef GENESIS + +/****************************************************************************** + * + * SkAddrXmacPromiscuousChange - set promiscuous mode for given port + * + * Description: + * This routine manages promiscuous mode: + * - none + * - all LLC frames + * - all MC frames + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_ADDR_SUCCESS + * SK_ADDR_ILLEGAL_PORT + */ +static int SkAddrXmacPromiscuousChange( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* port whose promiscuous mode changes */ +int NewPromMode) /* new promiscuous mode */ +{ + int i; + SK_BOOL InexactModeBit; + SK_U8 Inexact; + SK_U8 HwInexact; + SK_FILTER64 HwInexactFilter; + SK_U16 LoMode; /* Lower 16 bits of XMAC Mode Register. */ + int CurPromMode = SK_PROM_MODE_NONE; + + /* Read CurPromMode from Hardware. */ + XM_IN16(IoC, PortNumber, XM_MODE, &LoMode); + + if ((LoMode & XM_MD_ENA_PROM) != 0) { + /* Promiscuous mode! */ + CurPromMode |= SK_PROM_MODE_LLC; + } + + for (Inexact = 0xFF, i = 0; i < 8; i++) { + Inexact &= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i]; + } + if (Inexact == 0xFF) { + CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC); + } + else { + /* Get InexactModeBit (bit XM_MD_ENA_HASH in mode register) */ + XM_IN16(IoC, PortNumber, XM_MODE, &LoMode); + + InexactModeBit = (LoMode & XM_MD_ENA_HASH) != 0; + + /* Read 64-bit hash register from XMAC */ + XM_INHASH(IoC, PortNumber, XM_HSM, &HwInexactFilter.Bytes[0]); + + for (HwInexact = 0xFF, i = 0; i < 8; i++) { + HwInexact &= HwInexactFilter.Bytes[i]; + } + + if (InexactModeBit && (HwInexact == 0xFF)) { + CurPromMode |= SK_PROM_MODE_ALL_MC; + } + } + + pAC->Addr.Port[PortNumber].PromMode = NewPromMode; + + if (NewPromMode == CurPromMode) { + return (SK_ADDR_SUCCESS); + } + + if ((NewPromMode & SK_PROM_MODE_ALL_MC) && + !(CurPromMode & SK_PROM_MODE_ALL_MC)) { /* All MC. */ + + /* Set all bits in 64-bit hash register. */ + XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash); + + /* Enable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + else if ((CurPromMode & SK_PROM_MODE_ALL_MC) && + !(NewPromMode & SK_PROM_MODE_ALL_MC)) { /* Norm MC. */ + for (Inexact = 0, i = 0; i < 8; i++) { + Inexact |= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i]; + } + if (Inexact == 0) { + /* Disable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_FALSE); + } + else { + /* Set 64-bit hash register to InexactFilter. */ + XM_OUTHASH(IoC, PortNumber, XM_HSM, + &pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]); + + /* Enable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + } + + if ((NewPromMode & SK_PROM_MODE_LLC) && + !(CurPromMode & SK_PROM_MODE_LLC)) { /* Prom. LLC */ + /* Set the MAC in Promiscuous Mode */ + SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_TRUE); + } + else if ((CurPromMode & SK_PROM_MODE_LLC) && + !(NewPromMode & SK_PROM_MODE_LLC)) { /* Norm. LLC. */ + /* Clear Promiscuous Mode */ + SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_FALSE); + } + + return (SK_ADDR_SUCCESS); + +} /* SkAddrXmacPromiscuousChange */ + +#endif /* GENESIS */ + +#ifdef YUKON + +/****************************************************************************** + * + * SkAddrGmacPromiscuousChange - set promiscuous mode for given port + * + * Description: + * This routine manages promiscuous mode: + * - none + * - all LLC frames + * - all MC frames + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_ADDR_SUCCESS + * SK_ADDR_ILLEGAL_PORT + */ +static int SkAddrGmacPromiscuousChange( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 PortNumber, /* port whose promiscuous mode changes */ +int NewPromMode) /* new promiscuous mode */ +{ + SK_U16 ReceiveControl; /* GMAC Receive Control Register */ + int CurPromMode = SK_PROM_MODE_NONE; + + /* Read CurPromMode from Hardware. */ + GM_IN16(IoC, PortNumber, GM_RX_CTRL, &ReceiveControl); + + if ((ReceiveControl & (GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA)) == 0) { + /* Promiscuous mode! */ + CurPromMode |= SK_PROM_MODE_LLC; + } + + if ((ReceiveControl & GM_RXCR_MCF_ENA) == 0) { + /* All Multicast mode! */ + CurPromMode |= (pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_ALL_MC); + } + + pAC->Addr.Port[PortNumber].PromMode = NewPromMode; + + if (NewPromMode == CurPromMode) { + return (SK_ADDR_SUCCESS); + } + + if ((NewPromMode & SK_PROM_MODE_ALL_MC) && + !(CurPromMode & SK_PROM_MODE_ALL_MC)) { /* All MC */ + + /* Set all bits in 64-bit hash register. */ + GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash); + + /* Enable Hashing */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + + if ((CurPromMode & SK_PROM_MODE_ALL_MC) && + !(NewPromMode & SK_PROM_MODE_ALL_MC)) { /* Norm. MC */ + + /* Set 64-bit hash register to InexactFilter. */ + GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, + &pAC->Addr.Port[PortNumber].InexactFilter.Bytes[0]); + + /* Enable Hashing. */ + SkMacHashing(pAC, IoC, (int) PortNumber, SK_TRUE); + } + + if ((NewPromMode & SK_PROM_MODE_LLC) && + !(CurPromMode & SK_PROM_MODE_LLC)) { /* Prom. LLC */ + + /* Set the MAC to Promiscuous Mode. */ + SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_TRUE); + } + else if ((CurPromMode & SK_PROM_MODE_LLC) && + !(NewPromMode & SK_PROM_MODE_LLC)) { /* Norm. LLC */ + + /* Clear Promiscuous Mode. */ + SkMacPromiscMode(pAC, IoC, (int) PortNumber, SK_FALSE); + } + + return (SK_ADDR_SUCCESS); + +} /* SkAddrGmacPromiscuousChange */ + +#endif /* YUKON */ + +#ifndef SK_SLIM + +/****************************************************************************** + * + * SkAddrSwap - swap address info + * + * Description: + * This routine swaps address info of two ports. + * + * Context: + * runtime, pageable + * may be called after SK_INIT_IO + * + * Returns: + * SK_ADDR_SUCCESS + * SK_ADDR_ILLEGAL_PORT + */ +int SkAddrSwap( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +SK_U32 FromPortNumber, /* Port1 Index */ +SK_U32 ToPortNumber) /* Port2 Index */ +{ + int i; + SK_U8 Byte; + SK_MAC_ADDR MacAddr; + SK_U32 DWord; + + if (FromPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { + return (SK_ADDR_ILLEGAL_PORT); + } + + if (ToPortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { + return (SK_ADDR_ILLEGAL_PORT); + } + + if (pAC->Rlmt.Port[FromPortNumber].Net != pAC->Rlmt.Port[ToPortNumber].Net) { + return (SK_ADDR_ILLEGAL_PORT); + } + + /* + * Swap: + * - Exact Match Entries (GEnesis and Yukon) + * Yukon uses first entry for the logical MAC + * address (stored in the second GMAC register). + * - FirstExactMatchRlmt (GEnesis only) + * - NextExactMatchRlmt (GEnesis only) + * - FirstExactMatchDrv (GEnesis only) + * - NextExactMatchDrv (GEnesis only) + * - 64-bit filter (InexactFilter) + * - Promiscuous Mode + * of ports. + */ + + for (i = 0; i < SK_ADDR_EXACT_MATCHES; i++) { + MacAddr = pAC->Addr.Port[FromPortNumber].Exact[i]; + pAC->Addr.Port[FromPortNumber].Exact[i] = + pAC->Addr.Port[ToPortNumber].Exact[i]; + pAC->Addr.Port[ToPortNumber].Exact[i] = MacAddr; + } + + for (i = 0; i < 8; i++) { + Byte = pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i]; + pAC->Addr.Port[FromPortNumber].InexactFilter.Bytes[i] = + pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i]; + pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i] = Byte; + } + + i = pAC->Addr.Port[FromPortNumber].PromMode; + pAC->Addr.Port[FromPortNumber].PromMode = pAC->Addr.Port[ToPortNumber].PromMode; + pAC->Addr.Port[ToPortNumber].PromMode = i; + + if (pAC->GIni.GIGenesis) { + DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt; + pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt = + pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt; + pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt = DWord; + + DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt; + pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt = + pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt; + pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt = DWord; + + DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv; + pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv = + pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv; + pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv = DWord; + + DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchDrv; + pAC->Addr.Port[FromPortNumber].NextExactMatchDrv = + pAC->Addr.Port[ToPortNumber].NextExactMatchDrv; + pAC->Addr.Port[ToPortNumber].NextExactMatchDrv = DWord; + } + + /* CAUTION: Solution works if only ports of one adapter are in use. */ + for (i = 0; (SK_U32) i < pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber]. + Net->NetNumber].NumPorts; i++) { + if (pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber]. + Port[i]->PortNumber == ToPortNumber) { + pAC->Addr.Net[pAC->Rlmt.Port[ToPortNumber].Net->NetNumber]. + ActivePort = i; + /* 20001207 RA: Was "ToPortNumber;". */ + } + } + + (void) SkAddrMcUpdate(pAC, IoC, FromPortNumber); + (void) SkAddrMcUpdate(pAC, IoC, ToPortNumber); + + return (SK_ADDR_SUCCESS); + +} /* SkAddrSwap */ + +#endif /* !SK_SLIM */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + diff --git a/drivers/net/sk98lin/skdim.c b/drivers/net/sk98lin/skdim.c new file mode 100644 index 00000000000..37ce03fb8de --- /dev/null +++ b/drivers/net/sk98lin/skdim.c @@ -0,0 +1,742 @@ +/****************************************************************************** + * + * Name: skdim.c + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.5 $ + * Date: $Date: 2003/11/28 12:55:40 $ + * Purpose: All functions to maintain interrupt moderation + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This module is intended to manage the dynamic interrupt moderation on both + * GEnesis and Yukon adapters. + * + * Include File Hierarchy: + * + * "skdrv1st.h" + * "skdrv2nd.h" + * + ******************************************************************************/ + +#ifndef lint +static const char SysKonnectFileId[] = + "@(#) $Id: skdim.c,v 1.5 2003/11/28 12:55:40 rroesler Exp $ (C) SysKonnect."; +#endif + +#define __SKADDR_C + +#ifdef __cplusplus +#error C++ is not yet supported. +extern "C" { +#endif + +/******************************************************************************* +** +** Includes +** +*******************************************************************************/ + +#ifndef __INC_SKDRV1ST_H +#include "h/skdrv1st.h" +#endif + +#ifndef __INC_SKDRV2ND_H +#include "h/skdrv2nd.h" +#endif + +#include + +/******************************************************************************* +** +** Defines +** +*******************************************************************************/ + +/******************************************************************************* +** +** Typedefs +** +*******************************************************************************/ + +/******************************************************************************* +** +** Local function prototypes +** +*******************************************************************************/ + +static unsigned int GetCurrentSystemLoad(SK_AC *pAC); +static SK_U64 GetIsrCalls(SK_AC *pAC); +static SK_BOOL IsIntModEnabled(SK_AC *pAC); +static void SetCurrIntCtr(SK_AC *pAC); +static void EnableIntMod(SK_AC *pAC); +static void DisableIntMod(SK_AC *pAC); +static void ResizeDimTimerDuration(SK_AC *pAC); +static void DisplaySelectedModerationType(SK_AC *pAC); +static void DisplaySelectedModerationMask(SK_AC *pAC); +static void DisplayDescrRatio(SK_AC *pAC); + +/******************************************************************************* +** +** Global variables +** +*******************************************************************************/ + +/******************************************************************************* +** +** Local variables +** +*******************************************************************************/ + +/******************************************************************************* +** +** Global functions +** +*******************************************************************************/ + +/******************************************************************************* +** Function : SkDimModerate +** Description : Called in every ISR to check if moderation is to be applied +** or not for the current number of interrupts +** Programmer : Ralph Roesler +** Last Modified: 22-mar-03 +** Returns : void (!) +** Notes : - +*******************************************************************************/ + +void +SkDimModerate(SK_AC *pAC) { + unsigned int CurrSysLoad = 0; /* expressed in percent */ + unsigned int LoadIncrease = 0; /* expressed in percent */ + SK_U64 ThresholdInts = 0; + SK_U64 IsrCallsPerSec = 0; + +#define M_DIMINFO pAC->DynIrqModInfo + + if (!IsIntModEnabled(pAC)) { + if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) { + CurrSysLoad = GetCurrentSystemLoad(pAC); + if (CurrSysLoad > 75) { + /* + ** More than 75% total system load! Enable the moderation + ** to shield the system against too many interrupts. + */ + EnableIntMod(pAC); + } else if (CurrSysLoad > M_DIMINFO.PrevSysLoad) { + LoadIncrease = (CurrSysLoad - M_DIMINFO.PrevSysLoad); + if (LoadIncrease > ((M_DIMINFO.PrevSysLoad * + C_INT_MOD_ENABLE_PERCENTAGE) / 100)) { + if (CurrSysLoad > 10) { + /* + ** More than 50% increase with respect to the + ** previous load of the system. Most likely this + ** is due to our ISR-proc... + */ + EnableIntMod(pAC); + } + } + } else { + /* + ** Neither too much system load at all nor too much increase + ** with respect to the previous system load. Hence, we can leave + ** the ISR-handling like it is without enabling moderation. + */ + } + M_DIMINFO.PrevSysLoad = CurrSysLoad; + } + } else { + if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) { + ThresholdInts = ((M_DIMINFO.MaxModIntsPerSec * + C_INT_MOD_DISABLE_PERCENTAGE) / 100); + IsrCallsPerSec = GetIsrCalls(pAC); + if (IsrCallsPerSec <= ThresholdInts) { + /* + ** The number of interrupts within the last second is + ** lower than the disable_percentage of the desried + ** maxrate. Therefore we can disable the moderation. + */ + DisableIntMod(pAC); + M_DIMINFO.MaxModIntsPerSec = + (M_DIMINFO.MaxModIntsPerSecUpperLimit + + M_DIMINFO.MaxModIntsPerSecLowerLimit) / 2; + } else { + /* + ** The number of interrupts per sec is the same as expected. + ** Evalulate the descriptor-ratio. If it has changed, a resize + ** in the moderation timer might be useful + */ + if (M_DIMINFO.AutoSizing) { + ResizeDimTimerDuration(pAC); + } + } + } + } + + /* + ** Some information to the log... + */ + if (M_DIMINFO.DisplayStats) { + DisplaySelectedModerationType(pAC); + DisplaySelectedModerationMask(pAC); + DisplayDescrRatio(pAC); + } + + M_DIMINFO.NbrProcessedDescr = 0; + SetCurrIntCtr(pAC); +} + +/******************************************************************************* +** Function : SkDimStartModerationTimer +** Description : Starts the audit-timer for the dynamic interrupt moderation +** Programmer : Ralph Roesler +** Last Modified: 22-mar-03 +** Returns : void (!) +** Notes : - +*******************************************************************************/ + +void +SkDimStartModerationTimer(SK_AC *pAC) { + SK_EVPARA EventParam; /* Event struct for timer event */ + + SK_MEMSET((char *) &EventParam, 0, sizeof(EventParam)); + EventParam.Para32[0] = SK_DRV_MODERATION_TIMER; + SkTimerStart(pAC, pAC->IoBase, &pAC->DynIrqModInfo.ModTimer, + SK_DRV_MODERATION_TIMER_LENGTH, + SKGE_DRV, SK_DRV_TIMER, EventParam); +} + +/******************************************************************************* +** Function : SkDimEnableModerationIfNeeded +** Description : Either enables or disables moderation +** Programmer : Ralph Roesler +** Last Modified: 22-mar-03 +** Returns : void (!) +** Notes : This function is called when a particular adapter is opened +** There is no Disable function, because when all interrupts +** might be disable, the moderation timer has no meaning at all +******************************************************************************/ + +void +SkDimEnableModerationIfNeeded(SK_AC *pAC) { + + if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_STATIC) { + EnableIntMod(pAC); /* notification print in this function */ + } else if (M_DIMINFO.IntModTypeSelect == C_INT_MOD_DYNAMIC) { + SkDimStartModerationTimer(pAC); + if (M_DIMINFO.DisplayStats) { + printk("Dynamic moderation has been enabled\n"); + } + } else { + if (M_DIMINFO.DisplayStats) { + printk("No moderation has been enabled\n"); + } + } +} + +/******************************************************************************* +** Function : SkDimDisplayModerationSettings +** Description : Displays the current settings regarding interrupt moderation +** Programmer : Ralph Roesler +** Last Modified: 22-mar-03 +** Returns : void (!) +** Notes : - +*******************************************************************************/ + +void +SkDimDisplayModerationSettings(SK_AC *pAC) { + DisplaySelectedModerationType(pAC); + DisplaySelectedModerationMask(pAC); +} + +/******************************************************************************* +** +** Local functions +** +*******************************************************************************/ + +/******************************************************************************* +** Function : GetCurrentSystemLoad +** Description : Retrieves the current system load of the system. This load +** is evaluated for all processors within the system. +** Programmer : Ralph Roesler +** Last Modified: 22-mar-03 +** Returns : unsigned int: load expressed in percentage +** Notes : The possible range being returned is from 0 up to 100. +** Whereas 0 means 'no load at all' and 100 'system fully loaded' +** It is impossible to determine what actually causes the system +** to be in 100%, but maybe that is due to too much interrupts. +*******************************************************************************/ + +static unsigned int +GetCurrentSystemLoad(SK_AC *pAC) { + unsigned long jif = jiffies; + unsigned int UserTime = 0; + unsigned int SystemTime = 0; + unsigned int NiceTime = 0; + unsigned int IdleTime = 0; + unsigned int TotalTime = 0; + unsigned int UsedTime = 0; + unsigned int SystemLoad = 0; + + /* unsigned int NbrCpu = 0; */ + + /* + ** The following lines have been commented out, because + ** from kernel 2.5.44 onwards, the kernel-owned structure + ** + ** struct kernel_stat kstat + ** + ** is not marked as an exported symbol in the file + ** + ** kernel/ksyms.c + ** + ** As a consequence, using this driver as KLM is not possible + ** and any access of the structure kernel_stat via the + ** dedicated macros kstat_cpu(i).cpustat.xxx is to be avoided. + ** + ** The kstat-information might be added again in future + ** versions of the 2.5.xx kernel, but for the time being, + ** number of interrupts will serve as indication how much + ** load we currently have... + ** + ** for (NbrCpu = 0; NbrCpu < num_online_cpus(); NbrCpu++) { + ** UserTime = UserTime + kstat_cpu(NbrCpu).cpustat.user; + ** NiceTime = NiceTime + kstat_cpu(NbrCpu).cpustat.nice; + ** SystemTime = SystemTime + kstat_cpu(NbrCpu).cpustat.system; + ** } + */ + SK_U64 ThresholdInts = 0; + SK_U64 IsrCallsPerSec = 0; + + ThresholdInts = ((M_DIMINFO.MaxModIntsPerSec * + C_INT_MOD_ENABLE_PERCENTAGE) + 100); + IsrCallsPerSec = GetIsrCalls(pAC); + if (IsrCallsPerSec >= ThresholdInts) { + /* + ** We do not know how much the real CPU-load is! + ** Return 80% as a default in order to activate DIM + */ + SystemLoad = 80; + return (SystemLoad); + } + + UsedTime = UserTime + NiceTime + SystemTime; + + IdleTime = jif * num_online_cpus() - UsedTime; + TotalTime = UsedTime + IdleTime; + + SystemLoad = ( 100 * (UsedTime - M_DIMINFO.PrevUsedTime) ) / + (TotalTime - M_DIMINFO.PrevTotalTime); + + if (M_DIMINFO.DisplayStats) { + printk("Current system load is: %u\n", SystemLoad); + } + + M_DIMINFO.PrevTotalTime = TotalTime; + M_DIMINFO.PrevUsedTime = UsedTime; + + return (SystemLoad); +} + +/******************************************************************************* +** Function : GetIsrCalls +** Description : Depending on the selected moderation mask, this function will +** return the number of interrupts handled in the previous time- +** frame. This evaluated number is based on the current number +** of interrupts stored in PNMI-context and the previous stored +** interrupts. +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : int: the number of interrupts being executed in the last +** timeframe +** Notes : It makes only sense to call this function, when dynamic +** interrupt moderation is applied +*******************************************************************************/ + +static SK_U64 +GetIsrCalls(SK_AC *pAC) { + SK_U64 RxPort0IntDiff = 0; + SK_U64 RxPort1IntDiff = 0; + SK_U64 TxPort0IntDiff = 0; + SK_U64 TxPort1IntDiff = 0; + + if (pAC->DynIrqModInfo.MaskIrqModeration == IRQ_MASK_TX_ONLY) { + if (pAC->GIni.GIMacsFound == 2) { + TxPort1IntDiff = pAC->Pnmi.Port[1].TxIntrCts - + pAC->DynIrqModInfo.PrevPort1TxIntrCts; + } + TxPort0IntDiff = pAC->Pnmi.Port[0].TxIntrCts - + pAC->DynIrqModInfo.PrevPort0TxIntrCts; + } else if (pAC->DynIrqModInfo.MaskIrqModeration == IRQ_MASK_RX_ONLY) { + if (pAC->GIni.GIMacsFound == 2) { + RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts - + pAC->DynIrqModInfo.PrevPort1RxIntrCts; + } + RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts - + pAC->DynIrqModInfo.PrevPort0RxIntrCts; + } else { + if (pAC->GIni.GIMacsFound == 2) { + RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts - + pAC->DynIrqModInfo.PrevPort1RxIntrCts; + TxPort1IntDiff = pAC->Pnmi.Port[1].TxIntrCts - + pAC->DynIrqModInfo.PrevPort1TxIntrCts; + } + RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts - + pAC->DynIrqModInfo.PrevPort0RxIntrCts; + TxPort0IntDiff = pAC->Pnmi.Port[0].TxIntrCts - + pAC->DynIrqModInfo.PrevPort0TxIntrCts; + } + + return (RxPort0IntDiff + RxPort1IntDiff + TxPort0IntDiff + TxPort1IntDiff); +} + +/******************************************************************************* +** Function : GetRxCalls +** Description : This function will return the number of times a receive inter- +** rupt was processed. This is needed to evaluate any resizing +** factor. +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : SK_U64: the number of RX-ints being processed +** Notes : It makes only sense to call this function, when dynamic +** interrupt moderation is applied +*******************************************************************************/ + +static SK_U64 +GetRxCalls(SK_AC *pAC) { + SK_U64 RxPort0IntDiff = 0; + SK_U64 RxPort1IntDiff = 0; + + if (pAC->GIni.GIMacsFound == 2) { + RxPort1IntDiff = pAC->Pnmi.Port[1].RxIntrCts - + pAC->DynIrqModInfo.PrevPort1RxIntrCts; + } + RxPort0IntDiff = pAC->Pnmi.Port[0].RxIntrCts - + pAC->DynIrqModInfo.PrevPort0RxIntrCts; + + return (RxPort0IntDiff + RxPort1IntDiff); +} + +/******************************************************************************* +** Function : SetCurrIntCtr +** Description : Will store the current number orf occured interrupts in the +** adapter context. This is needed to evaluated the number of +** interrupts within a current timeframe. +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : void (!) +** Notes : - +*******************************************************************************/ + +static void +SetCurrIntCtr(SK_AC *pAC) { + if (pAC->GIni.GIMacsFound == 2) { + pAC->DynIrqModInfo.PrevPort1RxIntrCts = pAC->Pnmi.Port[1].RxIntrCts; + pAC->DynIrqModInfo.PrevPort1TxIntrCts = pAC->Pnmi.Port[1].TxIntrCts; + } + pAC->DynIrqModInfo.PrevPort0RxIntrCts = pAC->Pnmi.Port[0].RxIntrCts; + pAC->DynIrqModInfo.PrevPort0TxIntrCts = pAC->Pnmi.Port[0].TxIntrCts; +} + +/******************************************************************************* +** Function : IsIntModEnabled() +** Description : Retrieves the current value of the interrupts moderation +** command register. Its content determines whether any +** moderation is running or not. +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : SK_TRUE : if mod timer running +** SK_FALSE : if no moderation is being performed +** Notes : - +*******************************************************************************/ + +static SK_BOOL +IsIntModEnabled(SK_AC *pAC) { + unsigned long CtrCmd; + + SK_IN32(pAC->IoBase, B2_IRQM_CTRL, &CtrCmd); + if ((CtrCmd & TIM_START) == TIM_START) { + return SK_TRUE; + } else { + return SK_FALSE; + } +} + +/******************************************************************************* +** Function : EnableIntMod() +** Description : Enables the interrupt moderation using the values stored in +** in the pAC->DynIntMod data structure +** Programmer : Ralph Roesler +** Last Modified: 22-mar-03 +** Returns : - +** Notes : - +*******************************************************************************/ + +static void +EnableIntMod(SK_AC *pAC) { + unsigned long ModBase; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { + ModBase = C_CLK_FREQ_GENESIS / pAC->DynIrqModInfo.MaxModIntsPerSec; + } else { + ModBase = C_CLK_FREQ_YUKON / pAC->DynIrqModInfo.MaxModIntsPerSec; + } + + SK_OUT32(pAC->IoBase, B2_IRQM_INI, ModBase); + SK_OUT32(pAC->IoBase, B2_IRQM_MSK, pAC->DynIrqModInfo.MaskIrqModeration); + SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_START); + if (M_DIMINFO.DisplayStats) { + printk("Enabled interrupt moderation (%i ints/sec)\n", + M_DIMINFO.MaxModIntsPerSec); + } +} + +/******************************************************************************* +** Function : DisableIntMod() +** Description : Disables the interrupt moderation independent of what inter- +** rupts are running or not +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : - +** Notes : - +*******************************************************************************/ + +static void +DisableIntMod(SK_AC *pAC) { + + SK_OUT32(pAC->IoBase, B2_IRQM_CTRL, TIM_STOP); + if (M_DIMINFO.DisplayStats) { + printk("Disabled interrupt moderation\n"); + } +} + +/******************************************************************************* +** Function : ResizeDimTimerDuration(); +** Description : Checks the current used descriptor ratio and resizes the +** duration timer (longer/smaller) if possible. +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : - +** Notes : There are both maximum and minimum timer duration value. +** This function assumes that interrupt moderation is already +** enabled! +*******************************************************************************/ + +static void +ResizeDimTimerDuration(SK_AC *pAC) { + SK_BOOL IncreaseTimerDuration; + int TotalMaxNbrDescr; + int UsedDescrRatio; + int RatioDiffAbs; + int RatioDiffRel; + int NewMaxModIntsPerSec; + int ModAdjValue; + long ModBase; + + /* + ** Check first if we are allowed to perform any modification + */ + if (IsIntModEnabled(pAC)) { + if (M_DIMINFO.IntModTypeSelect != C_INT_MOD_DYNAMIC) { + return; + } else { + if (M_DIMINFO.ModJustEnabled) { + M_DIMINFO.ModJustEnabled = SK_FALSE; + return; + } + } + } + + /* + ** If we got until here, we have to evaluate the amount of the + ** descriptor ratio change... + */ + TotalMaxNbrDescr = pAC->RxDescrPerRing * GetRxCalls(pAC); + UsedDescrRatio = (M_DIMINFO.NbrProcessedDescr * 100) / TotalMaxNbrDescr; + + if (UsedDescrRatio > M_DIMINFO.PrevUsedDescrRatio) { + RatioDiffAbs = (UsedDescrRatio - M_DIMINFO.PrevUsedDescrRatio); + RatioDiffRel = (RatioDiffAbs * 100) / UsedDescrRatio; + M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio; + IncreaseTimerDuration = SK_FALSE; /* in other words: DECREASE */ + } else if (UsedDescrRatio < M_DIMINFO.PrevUsedDescrRatio) { + RatioDiffAbs = (M_DIMINFO.PrevUsedDescrRatio - UsedDescrRatio); + RatioDiffRel = (RatioDiffAbs * 100) / M_DIMINFO.PrevUsedDescrRatio; + M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio; + IncreaseTimerDuration = SK_TRUE; /* in other words: INCREASE */ + } else { + RatioDiffAbs = (M_DIMINFO.PrevUsedDescrRatio - UsedDescrRatio); + RatioDiffRel = (RatioDiffAbs * 100) / M_DIMINFO.PrevUsedDescrRatio; + M_DIMINFO.PrevUsedDescrRatio = UsedDescrRatio; + IncreaseTimerDuration = SK_TRUE; /* in other words: INCREASE */ + } + + /* + ** Now we can determine the change in percent + */ + if ((RatioDiffRel >= 0) && (RatioDiffRel <= 5) ) { + ModAdjValue = 1; /* 1% change - maybe some other value in future */ + } else if ((RatioDiffRel > 5) && (RatioDiffRel <= 10) ) { + ModAdjValue = 1; /* 1% change - maybe some other value in future */ + } else if ((RatioDiffRel > 10) && (RatioDiffRel <= 15) ) { + ModAdjValue = 1; /* 1% change - maybe some other value in future */ + } else { + ModAdjValue = 1; /* 1% change - maybe some other value in future */ + } + + if (IncreaseTimerDuration) { + NewMaxModIntsPerSec = M_DIMINFO.MaxModIntsPerSec + + (M_DIMINFO.MaxModIntsPerSec * ModAdjValue) / 100; + } else { + NewMaxModIntsPerSec = M_DIMINFO.MaxModIntsPerSec - + (M_DIMINFO.MaxModIntsPerSec * ModAdjValue) / 100; + } + + /* + ** Check if we exceed boundaries... + */ + if ( (NewMaxModIntsPerSec > M_DIMINFO.MaxModIntsPerSecUpperLimit) || + (NewMaxModIntsPerSec < M_DIMINFO.MaxModIntsPerSecLowerLimit)) { + if (M_DIMINFO.DisplayStats) { + printk("Cannot change ModTim from %i to %i ints/sec\n", + M_DIMINFO.MaxModIntsPerSec, NewMaxModIntsPerSec); + } + return; + } else { + if (M_DIMINFO.DisplayStats) { + printk("Resized ModTim from %i to %i ints/sec\n", + M_DIMINFO.MaxModIntsPerSec, NewMaxModIntsPerSec); + } + } + + M_DIMINFO.MaxModIntsPerSec = NewMaxModIntsPerSec; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { + ModBase = C_CLK_FREQ_GENESIS / pAC->DynIrqModInfo.MaxModIntsPerSec; + } else { + ModBase = C_CLK_FREQ_YUKON / pAC->DynIrqModInfo.MaxModIntsPerSec; + } + + /* + ** We do not need to touch any other registers + */ + SK_OUT32(pAC->IoBase, B2_IRQM_INI, ModBase); +} + +/******************************************************************************* +** Function : DisplaySelectedModerationType() +** Description : Displays what type of moderation we have +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : void! +** Notes : - +*******************************************************************************/ + +static void +DisplaySelectedModerationType(SK_AC *pAC) { + + if (pAC->DynIrqModInfo.DisplayStats) { + if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_STATIC) { + printk("Static int moderation runs with %i INTS/sec\n", + pAC->DynIrqModInfo.MaxModIntsPerSec); + } else if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_DYNAMIC) { + if (IsIntModEnabled(pAC)) { + printk("Dynamic int moderation runs with %i INTS/sec\n", + pAC->DynIrqModInfo.MaxModIntsPerSec); + } else { + printk("Dynamic int moderation currently not applied\n"); + } + } else { + printk("No interrupt moderation selected!\n"); + } + } +} + +/******************************************************************************* +** Function : DisplaySelectedModerationMask() +** Description : Displays what interrupts are moderated +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : void! +** Notes : - +*******************************************************************************/ + +static void +DisplaySelectedModerationMask(SK_AC *pAC) { + + if (pAC->DynIrqModInfo.DisplayStats) { + if (pAC->DynIrqModInfo.IntModTypeSelect != C_INT_MOD_NONE) { + switch (pAC->DynIrqModInfo.MaskIrqModeration) { + case IRQ_MASK_TX_ONLY: + printk("Only Tx-interrupts are moderated\n"); + break; + case IRQ_MASK_RX_ONLY: + printk("Only Rx-interrupts are moderated\n"); + break; + case IRQ_MASK_SP_ONLY: + printk("Only special-interrupts are moderated\n"); + break; + case IRQ_MASK_TX_RX: + printk("Tx- and Rx-interrupts are moderated\n"); + break; + case IRQ_MASK_SP_RX: + printk("Special- and Rx-interrupts are moderated\n"); + break; + case IRQ_MASK_SP_TX: + printk("Special- and Tx-interrupts are moderated\n"); + break; + case IRQ_MASK_RX_TX_SP: + printk("All Rx-, Tx and special-interrupts are moderated\n"); + break; + default: + printk("Don't know what is moderated\n"); + break; + } + } else { + printk("No specific interrupts masked for moderation\n"); + } + } +} + +/******************************************************************************* +** Function : DisplayDescrRatio +** Description : Like the name states... +** Programmer : Ralph Roesler +** Last Modified: 23-mar-03 +** Returns : void! +** Notes : - +*******************************************************************************/ + +static void +DisplayDescrRatio(SK_AC *pAC) { + int TotalMaxNbrDescr = 0; + + if (pAC->DynIrqModInfo.DisplayStats) { + TotalMaxNbrDescr = pAC->RxDescrPerRing * GetRxCalls(pAC); + printk("Ratio descriptors: %i/%i\n", + M_DIMINFO.NbrProcessedDescr, TotalMaxNbrDescr); + } +} + +/******************************************************************************* +** +** End of file +** +*******************************************************************************/ diff --git a/drivers/net/sk98lin/skethtool.c b/drivers/net/sk98lin/skethtool.c new file mode 100644 index 00000000000..5a6da8950fa --- /dev/null +++ b/drivers/net/sk98lin/skethtool.c @@ -0,0 +1,627 @@ +/****************************************************************************** + * + * Name: skethtool.c + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.7 $ + * Date: $Date: 2004/09/29 13:32:07 $ + * Purpose: All functions regarding ethtool handling + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2004 Marvell. + * + * Driver for Marvell Yukon/2 chipset and SysKonnect Gigabit Ethernet + * Server Adapters. + * + * Author: Ralph Roesler (rroesler@syskonnect.de) + * Mirko Lindner (mlindner@syskonnect.de) + * + * Address all question to: linux@syskonnect.de + * + * The technical manual for the adapters is available from SysKonnect's + * web pages: www.syskonnect.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + *****************************************************************************/ + +#include "h/skdrv1st.h" +#include "h/skdrv2nd.h" +#include "h/skversion.h" + +#include +#include +#include + +/****************************************************************************** + * + * Defines + * + *****************************************************************************/ + +#define SUPP_COPPER_ALL (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \ + SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \ + SUPPORTED_1000baseT_Half| SUPPORTED_1000baseT_Full| \ + SUPPORTED_TP) + +#define ADV_COPPER_ALL (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ + ADVERTISED_1000baseT_Half| ADVERTISED_1000baseT_Full| \ + ADVERTISED_TP) + +#define SUPP_FIBRE_ALL (SUPPORTED_1000baseT_Full | \ + SUPPORTED_FIBRE | \ + SUPPORTED_Autoneg) + +#define ADV_FIBRE_ALL (ADVERTISED_1000baseT_Full | \ + ADVERTISED_FIBRE | \ + ADVERTISED_Autoneg) + + +/****************************************************************************** + * + * Local Functions + * + *****************************************************************************/ + +/***************************************************************************** + * + * getSettings - retrieves the current settings of the selected adapter + * + * Description: + * The current configuration of the selected adapter is returned. + * This configuration involves a)speed, b)duplex and c)autoneg plus + * a number of other variables. + * + * Returns: always 0 + * + */ +static int getSettings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + const DEV_NET *pNet = netdev_priv(dev); + int port = pNet->PortNr; + const SK_AC *pAC = pNet->pAC; + const SK_GEPORT *pPort = &pAC->GIni.GP[port]; + + static int DuplexAutoNegConfMap[9][3]= { + { -1 , -1 , -1 }, + { 0 , -1 , -1 }, + { SK_LMODE_HALF , DUPLEX_HALF, AUTONEG_DISABLE }, + { SK_LMODE_FULL , DUPLEX_FULL, AUTONEG_DISABLE }, + { SK_LMODE_AUTOHALF , DUPLEX_HALF, AUTONEG_ENABLE }, + { SK_LMODE_AUTOFULL , DUPLEX_FULL, AUTONEG_ENABLE }, + { SK_LMODE_AUTOBOTH , DUPLEX_FULL, AUTONEG_ENABLE }, + { SK_LMODE_AUTOSENSE , -1 , -1 }, + { SK_LMODE_INDETERMINATED, -1 , -1 } + }; + static int SpeedConfMap[6][2] = { + { 0 , -1 }, + { SK_LSPEED_AUTO , -1 }, + { SK_LSPEED_10MBPS , SPEED_10 }, + { SK_LSPEED_100MBPS , SPEED_100 }, + { SK_LSPEED_1000MBPS , SPEED_1000 }, + { SK_LSPEED_INDETERMINATED, -1 } + }; + static int AdvSpeedMap[6][2] = { + { 0 , -1 }, + { SK_LSPEED_AUTO , -1 }, + { SK_LSPEED_10MBPS , ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full }, + { SK_LSPEED_100MBPS , ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full }, + { SK_LSPEED_1000MBPS , ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full}, + { SK_LSPEED_INDETERMINATED, -1 } + }; + + ecmd->phy_address = port; + ecmd->speed = SpeedConfMap[pPort->PLinkSpeedUsed][1]; + ecmd->duplex = DuplexAutoNegConfMap[pPort->PLinkModeStatus][1]; + ecmd->autoneg = DuplexAutoNegConfMap[pPort->PLinkModeStatus][2]; + ecmd->transceiver = XCVR_INTERNAL; + + if (pAC->GIni.GICopperType) { + ecmd->port = PORT_TP; + ecmd->supported = (SUPP_COPPER_ALL|SUPPORTED_Autoneg); + if (pAC->GIni.GIGenesis) { + ecmd->supported &= ~(SUPPORTED_10baseT_Half); + ecmd->supported &= ~(SUPPORTED_10baseT_Full); + ecmd->supported &= ~(SUPPORTED_100baseT_Half); + ecmd->supported &= ~(SUPPORTED_100baseT_Full); + } else { + if (pAC->GIni.GIChipId == CHIP_ID_YUKON) { + ecmd->supported &= ~(SUPPORTED_1000baseT_Half); + } +#ifdef CHIP_ID_YUKON_FE + if (pAC->GIni.GIChipId == CHIP_ID_YUKON_FE) { + ecmd->supported &= ~(SUPPORTED_1000baseT_Half); + ecmd->supported &= ~(SUPPORTED_1000baseT_Full); + } +#endif + } + if (pAC->GIni.GP[0].PLinkSpeed != SK_LSPEED_AUTO) { + ecmd->advertising = AdvSpeedMap[pPort->PLinkSpeed][1]; + if (pAC->GIni.GIChipId == CHIP_ID_YUKON) { + ecmd->advertising &= ~(SUPPORTED_1000baseT_Half); + } + } else { + ecmd->advertising = ecmd->supported; + } + + if (ecmd->autoneg == AUTONEG_ENABLE) + ecmd->advertising |= ADVERTISED_Autoneg; + } else { + ecmd->port = PORT_FIBRE; + ecmd->supported = SUPP_FIBRE_ALL; + ecmd->advertising = ADV_FIBRE_ALL; + } + return 0; +} + +/* + * MIB infrastructure uses instance value starting at 1 + * based on board and port. + */ +static inline u32 pnmiInstance(const DEV_NET *pNet) +{ + return 1 + (pNet->pAC->RlmtNets == 2) + pNet->PortNr; +} + +/***************************************************************************** + * + * setSettings - configures the settings of a selected adapter + * + * Description: + * Possible settings that may be altered are a)speed, b)duplex or + * c)autonegotiation. + * + * Returns: + * 0: everything fine, no error + * <0: the return value is the error code of the failure + */ +static int setSettings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + u32 instance; + char buf[4]; + int len = 1; + + if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100 + && ecmd->speed != SPEED_1000) + return -EINVAL; + + if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL) + return -EINVAL; + + if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE) + return -EINVAL; + + if (ecmd->autoneg == AUTONEG_DISABLE) + *buf = (ecmd->duplex == DUPLEX_FULL) + ? SK_LMODE_FULL : SK_LMODE_HALF; + else + *buf = (ecmd->duplex == DUPLEX_FULL) + ? SK_LMODE_AUTOFULL : SK_LMODE_AUTOHALF; + + instance = pnmiInstance(pNet); + if (SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_LINK_MODE, + &buf, &len, instance, pNet->NetNr) != SK_PNMI_ERR_OK) + return -EINVAL; + + switch(ecmd->speed) { + case SPEED_1000: + *buf = SK_LSPEED_1000MBPS; + break; + case SPEED_100: + *buf = SK_LSPEED_100MBPS; + break; + case SPEED_10: + *buf = SK_LSPEED_10MBPS; + } + + if (SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_SPEED_MODE, + &buf, &len, instance, pNet->NetNr) != SK_PNMI_ERR_OK) + return -EINVAL; + + return 0; +} + +/***************************************************************************** + * + * getDriverInfo - returns generic driver and adapter information + * + * Description: + * Generic driver information is returned via this function, such as + * the name of the driver, its version and and firmware version. + * In addition to this, the location of the selected adapter is + * returned as a bus info string (e.g. '01:05.0'). + * + * Returns: N/A + * + */ +static void getDriverInfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + const DEV_NET *pNet = netdev_priv(dev); + const SK_AC *pAC = pNet->pAC; + char vers[32]; + + snprintf(vers, sizeof(vers)-1, VER_STRING "(v%d.%d)", + (pAC->GIni.GIPciHwRev >> 4) & 0xf, pAC->GIni.GIPciHwRev & 0xf); + + strlcpy(info->driver, DRIVER_FILE_NAME, sizeof(info->driver)); + strcpy(info->version, vers); + strcpy(info->fw_version, "N/A"); + strlcpy(info->bus_info, pci_name(pAC->PciDev), ETHTOOL_BUSINFO_LEN); +} + +/* + * Ethtool statistics support. + */ +static const char StringsStats[][ETH_GSTRING_LEN] = { + "rx_packets", "tx_packets", + "rx_bytes", "tx_bytes", + "rx_errors", "tx_errors", + "rx_dropped", "tx_dropped", + "multicasts", "collisions", + "rx_length_errors", "rx_buffer_overflow_errors", + "rx_crc_errors", "rx_frame_errors", + "rx_too_short_errors", "rx_too_long_errors", + "rx_carrier_extension_errors", "rx_symbol_errors", + "rx_llc_mac_size_errors", "rx_carrier_errors", + "rx_jabber_errors", "rx_missed_errors", + "tx_abort_collision_errors", "tx_carrier_errors", + "tx_buffer_underrun_errors", "tx_heartbeat_errors", + "tx_window_errors", +}; + +static int getStatsCount(struct net_device *dev) +{ + return ARRAY_SIZE(StringsStats); +} + +static void getStrings(struct net_device *dev, u32 stringset, u8 *data) +{ + switch(stringset) { + case ETH_SS_STATS: + memcpy(data, *StringsStats, sizeof(StringsStats)); + break; + } +} + +static void getEthtoolStats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + const DEV_NET *pNet = netdev_priv(dev); + const SK_AC *pAC = pNet->pAC; + const SK_PNMI_STRUCT_DATA *pPnmiStruct = &pAC->PnmiStruct; + + *data++ = pPnmiStruct->Stat[0].StatRxOkCts; + *data++ = pPnmiStruct->Stat[0].StatTxOkCts; + *data++ = pPnmiStruct->Stat[0].StatRxOctetsOkCts; + *data++ = pPnmiStruct->Stat[0].StatTxOctetsOkCts; + *data++ = pPnmiStruct->InErrorsCts; + *data++ = pPnmiStruct->Stat[0].StatTxSingleCollisionCts; + *data++ = pPnmiStruct->RxNoBufCts; + *data++ = pPnmiStruct->TxNoBufCts; + *data++ = pPnmiStruct->Stat[0].StatRxMulticastOkCts; + *data++ = pPnmiStruct->Stat[0].StatTxSingleCollisionCts; + *data++ = pPnmiStruct->Stat[0].StatRxRuntCts; + *data++ = pPnmiStruct->Stat[0].StatRxFifoOverflowCts; + *data++ = pPnmiStruct->Stat[0].StatRxFcsCts; + *data++ = pPnmiStruct->Stat[0].StatRxFramingCts; + *data++ = pPnmiStruct->Stat[0].StatRxShortsCts; + *data++ = pPnmiStruct->Stat[0].StatRxTooLongCts; + *data++ = pPnmiStruct->Stat[0].StatRxCextCts; + *data++ = pPnmiStruct->Stat[0].StatRxSymbolCts; + *data++ = pPnmiStruct->Stat[0].StatRxIRLengthCts; + *data++ = pPnmiStruct->Stat[0].StatRxCarrierCts; + *data++ = pPnmiStruct->Stat[0].StatRxJabberCts; + *data++ = pPnmiStruct->Stat[0].StatRxMissedCts; + *data++ = pAC->stats.tx_aborted_errors; + *data++ = pPnmiStruct->Stat[0].StatTxCarrierCts; + *data++ = pPnmiStruct->Stat[0].StatTxFifoUnderrunCts; + *data++ = pPnmiStruct->Stat[0].StatTxCarrierCts; + *data++ = pAC->stats.tx_window_errors; +} + + +/***************************************************************************** + * + * toggleLeds - Changes the LED state of an adapter + * + * Description: + * This function changes the current state of all LEDs of an adapter so + * that it can be located by a user. + * + * Returns: N/A + * + */ +static void toggleLeds(DEV_NET *pNet, int on) +{ + SK_AC *pAC = pNet->pAC; + int port = pNet->PortNr; + void __iomem *io = pAC->IoBase; + + if (pAC->GIni.GIGenesis) { + SK_OUT8(io, MR_ADDR(port,LNK_LED_REG), + on ? SK_LNK_ON : SK_LNK_OFF); + SkGeYellowLED(pAC, io, + on ? (LED_ON >> 1) : (LED_OFF >> 1)); + SkGeXmitLED(pAC, io, MR_ADDR(port,RX_LED_INI), + on ? SK_LED_TST : SK_LED_DIS); + + if (pAC->GIni.GP[port].PhyType == SK_PHY_BCOM) + SkXmPhyWrite(pAC, io, port, PHY_BCOM_P_EXT_CTRL, + on ? PHY_B_PEC_LED_ON : PHY_B_PEC_LED_OFF); + else if (pAC->GIni.GP[port].PhyType == SK_PHY_LONE) + SkXmPhyWrite(pAC, io, port, PHY_LONE_LED_CFG, + on ? 0x0800 : PHY_L_LC_LEDT); + else + SkGeXmitLED(pAC, io, MR_ADDR(port,TX_LED_INI), + on ? SK_LED_TST : SK_LED_DIS); + } else { + const u16 YukLedOn = (PHY_M_LED_MO_DUP(MO_LED_ON) | + PHY_M_LED_MO_10(MO_LED_ON) | + PHY_M_LED_MO_100(MO_LED_ON) | + PHY_M_LED_MO_1000(MO_LED_ON) | + PHY_M_LED_MO_RX(MO_LED_ON)); + const u16 YukLedOff = (PHY_M_LED_MO_DUP(MO_LED_OFF) | + PHY_M_LED_MO_10(MO_LED_OFF) | + PHY_M_LED_MO_100(MO_LED_OFF) | + PHY_M_LED_MO_1000(MO_LED_OFF) | + PHY_M_LED_MO_RX(MO_LED_OFF)); + + + SkGmPhyWrite(pAC,io,port,PHY_MARV_LED_CTRL,0); + SkGmPhyWrite(pAC,io,port,PHY_MARV_LED_OVER, + on ? YukLedOn : YukLedOff); + } +} + +/***************************************************************************** + * + * skGeBlinkTimer - Changes the LED state of an adapter + * + * Description: + * This function changes the current state of all LEDs of an adapter so + * that it can be located by a user. If the requested time interval for + * this test has elapsed, this function cleans up everything that was + * temporarily setup during the locate NIC test. This involves of course + * also closing or opening any adapter so that the initial board state + * is recovered. + * + * Returns: N/A + * + */ +void SkGeBlinkTimer(unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + toggleLeds(pNet, pAC->LedsOn); + + pAC->LedsOn = !pAC->LedsOn; + mod_timer(&pAC->BlinkTimer, jiffies + HZ/4); +} + +/***************************************************************************** + * + * locateDevice - start the locate NIC feature of the elected adapter + * + * Description: + * This function is used if the user want to locate a particular NIC. + * All LEDs are regularly switched on and off, so the NIC can easily + * be identified. + * + * Returns: + * ==0: everything fine, no error, locateNIC test was started + * !=0: one locateNIC test runs already + * + */ +static int locateDevice(struct net_device *dev, u32 data) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) + data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ); + + /* start blinking */ + pAC->LedsOn = 0; + mod_timer(&pAC->BlinkTimer, jiffies); + msleep_interruptible(data * 1000); + del_timer_sync(&pAC->BlinkTimer); + toggleLeds(pNet, 0); + + return 0; +} + +/***************************************************************************** + * + * getPauseParams - retrieves the pause parameters + * + * Description: + * All current pause parameters of a selected adapter are placed + * in the passed ethtool_pauseparam structure and are returned. + * + * Returns: N/A + * + */ +static void getPauseParams(struct net_device *dev, struct ethtool_pauseparam *epause) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + SK_GEPORT *pPort = &pAC->GIni.GP[pNet->PortNr]; + + epause->rx_pause = (pPort->PFlowCtrlMode == SK_FLOW_MODE_SYMMETRIC) || + (pPort->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM); + + epause->tx_pause = epause->rx_pause || (pPort->PFlowCtrlMode == SK_FLOW_MODE_LOC_SEND); + epause->autoneg = epause->rx_pause || epause->tx_pause; +} + +/***************************************************************************** + * + * setPauseParams - configures the pause parameters of an adapter + * + * Description: + * This function sets the Rx or Tx pause parameters + * + * Returns: + * ==0: everything fine, no error + * !=0: the return value is the error code of the failure + */ +static int setPauseParams(struct net_device *dev , struct ethtool_pauseparam *epause) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + SK_GEPORT *pPort = &pAC->GIni.GP[pNet->PortNr]; + u32 instance = pnmiInstance(pNet); + struct ethtool_pauseparam old; + u8 oldspeed = pPort->PLinkSpeedUsed; + char buf[4]; + int len = 1; + int ret; + + /* + ** we have to determine the current settings to see if + ** the operator requested any modification of the flow + ** control parameters... + */ + getPauseParams(dev, &old); + + /* + ** perform modifications regarding the changes + ** requested by the operator + */ + if (epause->autoneg != old.autoneg) + *buf = epause->autoneg ? SK_FLOW_MODE_NONE : SK_FLOW_MODE_SYMMETRIC; + else { + if (epause->rx_pause && epause->tx_pause) + *buf = SK_FLOW_MODE_SYMMETRIC; + else if (epause->rx_pause && !epause->tx_pause) + *buf = SK_FLOW_MODE_SYM_OR_REM; + else if (!epause->rx_pause && epause->tx_pause) + *buf = SK_FLOW_MODE_LOC_SEND; + else + *buf = SK_FLOW_MODE_NONE; + } + + ret = SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_FLOWCTRL_MODE, + &buf, &len, instance, pNet->NetNr); + + if (ret != SK_PNMI_ERR_OK) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_CTRL, + ("ethtool (sk98lin): error changing rx/tx pause (%i)\n", ret)); + goto err; + } + + /* + ** It may be that autoneg has been disabled! Therefore + ** set the speed to the previously used value... + */ + if (!epause->autoneg) { + len = 1; + ret = SkPnmiSetVar(pAC, pAC->IoBase, OID_SKGE_SPEED_MODE, + &oldspeed, &len, instance, pNet->NetNr); + if (ret != SK_PNMI_ERR_OK) + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_CTRL, + ("ethtool (sk98lin): error setting speed (%i)\n", ret)); + } + err: + return ret ? -EIO : 0; +} + +/* Only Yukon supports checksum offload. */ +static int setScatterGather(struct net_device *dev, u32 data) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) + return -EOPNOTSUPP; + return ethtool_op_set_sg(dev, data); +} + +static int setTxCsum(struct net_device *dev, u32 data) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) + return -EOPNOTSUPP; + + return ethtool_op_set_tx_csum(dev, data); +} + +static u32 getRxCsum(struct net_device *dev) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + return pAC->RxPort[pNet->PortNr].RxCsum; +} + +static int setRxCsum(struct net_device *dev, u32 data) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) + return -EOPNOTSUPP; + + pAC->RxPort[pNet->PortNr].RxCsum = data != 0; + return 0; +} + +static int getRegsLen(struct net_device *dev) +{ + return 0x4000; +} + +/* + * Returns copy of whole control register region + * Note: skip RAM address register because accessing it will + * cause bus hangs! + */ +static void getRegs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + DEV_NET *pNet = netdev_priv(dev); + const void __iomem *io = pNet->pAC->IoBase; + + regs->version = 1; + memset(p, 0, regs->len); + memcpy_fromio(p, io, B3_RAM_ADDR); + + memcpy_fromio(p + B3_RI_WTO_R1, io + B3_RI_WTO_R1, + regs->len - B3_RI_WTO_R1); +} + +const struct ethtool_ops SkGeEthtoolOps = { + .get_settings = getSettings, + .set_settings = setSettings, + .get_drvinfo = getDriverInfo, + .get_strings = getStrings, + .get_stats_count = getStatsCount, + .get_ethtool_stats = getEthtoolStats, + .phys_id = locateDevice, + .get_pauseparam = getPauseParams, + .set_pauseparam = setPauseParams, + .get_link = ethtool_op_get_link, + .get_sg = ethtool_op_get_sg, + .set_sg = setScatterGather, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = setTxCsum, + .get_rx_csum = getRxCsum, + .set_rx_csum = setRxCsum, + .get_regs = getRegs, + .get_regs_len = getRegsLen, +}; diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c new file mode 100644 index 00000000000..7dc9c9ebf5e --- /dev/null +++ b/drivers/net/sk98lin/skge.c @@ -0,0 +1,5219 @@ +/****************************************************************************** + * + * Name: skge.c + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.45 $ + * Date: $Date: 2004/02/12 14:41:02 $ + * Purpose: The main driver source module + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * Driver for Marvell Yukon chipset and SysKonnect Gigabit Ethernet + * Server Adapters. + * + * Created 10-Feb-1999, based on Linux' acenic.c, 3c59x.c and + * SysKonnects GEnesis Solaris driver + * Author: Christoph Goos (cgoos@syskonnect.de) + * Mirko Lindner (mlindner@syskonnect.de) + * + * Address all question to: linux@syskonnect.de + * + * The technical manual for the adapters is available from SysKonnect's + * web pages: www.syskonnect.com + * Goto "Support" and search Knowledge Base for "manual". + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Possible compiler options (#define xxx / -Dxxx): + * + * debugging can be enable by changing SK_DEBUG_CHKMOD and + * SK_DEBUG_CHKCAT in makefile (described there). + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This is the main module of the Linux GE driver. + * + * All source files except skge.c, skdrv1st.h, skdrv2nd.h and sktypes.h + * are part of SysKonnect's COMMON MODULES for the SK-98xx adapters. + * Those are used for drivers on multiple OS', so some thing may seem + * unnecessary complicated on Linux. Please do not try to 'clean up' + * them without VERY good reasons, because this will make it more + * difficult to keep the Linux driver in synchronisation with the + * other versions. + * + * Include file hierarchy: + * + * + * + * "h/skdrv1st.h" + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * those three depending on kernel version used: + * + * + * + * + * + * "h/skerror.h" + * "h/skdebug.h" + * "h/sktypes.h" + * "h/lm80.h" + * "h/xmac_ii.h" + * + * "h/skdrv2nd.h" + * "h/skqueue.h" + * "h/skgehwt.h" + * "h/sktimer.h" + * "h/ski2c.h" + * "h/skgepnmi.h" + * "h/skvpd.h" + * "h/skgehw.h" + * "h/skgeinit.h" + * "h/skaddr.h" + * "h/skgesirq.h" + * "h/skrlmt.h" + * + ******************************************************************************/ + +#include "h/skversion.h" + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "h/skdrv1st.h" +#include "h/skdrv2nd.h" + +/******************************************************************************* + * + * Defines + * + ******************************************************************************/ + +/* for debuging on x86 only */ +/* #define BREAKPOINT() asm(" int $3"); */ + +/* use the transmit hw checksum driver functionality */ +#define USE_SK_TX_CHECKSUM + +/* use the receive hw checksum driver functionality */ +#define USE_SK_RX_CHECKSUM + +/* use the scatter-gather functionality with sendfile() */ +#define SK_ZEROCOPY + +/* use of a transmit complete interrupt */ +#define USE_TX_COMPLETE + +/* + * threshold for copying small receive frames + * set to 0 to avoid copying, set to 9001 to copy all frames + */ +#define SK_COPY_THRESHOLD 50 + +/* number of adapters that can be configured via command line params */ +#define SK_MAX_CARD_PARAM 16 + + + +/* + * use those defines for a compile-in version of the driver instead + * of command line parameters + */ +// #define LINK_SPEED_A {"Auto", } +// #define LINK_SPEED_B {"Auto", } +// #define AUTO_NEG_A {"Sense", } +// #define AUTO_NEG_B {"Sense", } +// #define DUP_CAP_A {"Both", } +// #define DUP_CAP_B {"Both", } +// #define FLOW_CTRL_A {"SymOrRem", } +// #define FLOW_CTRL_B {"SymOrRem", } +// #define ROLE_A {"Auto", } +// #define ROLE_B {"Auto", } +// #define PREF_PORT {"A", } +// #define CON_TYPE {"Auto", } +// #define RLMT_MODE {"CheckLinkState", } + +#define DEV_KFREE_SKB(skb) dev_kfree_skb(skb) +#define DEV_KFREE_SKB_IRQ(skb) dev_kfree_skb_irq(skb) +#define DEV_KFREE_SKB_ANY(skb) dev_kfree_skb_any(skb) + + +/* Set blink mode*/ +#define OEM_CONFIG_VALUE ( SK_ACT_LED_BLINK | \ + SK_DUP_LED_NORMAL | \ + SK_LED_LINK100_ON) + + +/* Isr return value */ +#define SkIsrRetVar irqreturn_t +#define SkIsrRetNone IRQ_NONE +#define SkIsrRetHandled IRQ_HANDLED + + +/******************************************************************************* + * + * Local Function Prototypes + * + ******************************************************************************/ + +static void FreeResources(struct SK_NET_DEVICE *dev); +static int SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC); +static SK_BOOL BoardAllocMem(SK_AC *pAC); +static void BoardFreeMem(SK_AC *pAC); +static void BoardInitMem(SK_AC *pAC); +static void SetupRing(SK_AC*, void*, uintptr_t, RXD**, RXD**, RXD**, int*, SK_BOOL); +static SkIsrRetVar SkGeIsr(int irq, void *dev_id); +static SkIsrRetVar SkGeIsrOnePort(int irq, void *dev_id); +static int SkGeOpen(struct SK_NET_DEVICE *dev); +static int SkGeClose(struct SK_NET_DEVICE *dev); +static int SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev); +static int SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p); +static void SkGeSetRxMode(struct SK_NET_DEVICE *dev); +static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev); +static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd); +static void GetConfiguration(SK_AC*); +static int XmitFrame(SK_AC*, TX_PORT*, struct sk_buff*); +static void FreeTxDescriptors(SK_AC*pAC, TX_PORT*); +static void FillRxRing(SK_AC*, RX_PORT*); +static SK_BOOL FillRxDescriptor(SK_AC*, RX_PORT*); +static void ReceiveIrq(SK_AC*, RX_PORT*, SK_BOOL); +static void ClearAndStartRx(SK_AC*, int); +static void ClearTxIrq(SK_AC*, int, int); +static void ClearRxRing(SK_AC*, RX_PORT*); +static void ClearTxRing(SK_AC*, TX_PORT*); +static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int new_mtu); +static void PortReInitBmu(SK_AC*, int); +static int SkGeIocMib(DEV_NET*, unsigned int, int); +static int SkGeInitPCI(SK_AC *pAC); +static void StartDrvCleanupTimer(SK_AC *pAC); +static void StopDrvCleanupTimer(SK_AC *pAC); +static int XmitFrameSG(SK_AC*, TX_PORT*, struct sk_buff*); + +#ifdef SK_DIAG_SUPPORT +static SK_U32 ParseDeviceNbrFromSlotName(const char *SlotName); +static int SkDrvInitAdapter(SK_AC *pAC, int devNbr); +static int SkDrvDeInitAdapter(SK_AC *pAC, int devNbr); +#endif + +/******************************************************************************* + * + * Extern Function Prototypes + * + ******************************************************************************/ +extern void SkDimEnableModerationIfNeeded(SK_AC *pAC); +extern void SkDimDisplayModerationSettings(SK_AC *pAC); +extern void SkDimStartModerationTimer(SK_AC *pAC); +extern void SkDimModerate(SK_AC *pAC); +extern void SkGeBlinkTimer(unsigned long data); + +#ifdef DEBUG +static void DumpMsg(struct sk_buff*, char*); +static void DumpData(char*, int); +static void DumpLong(char*, int); +#endif + +/* global variables *********************************************************/ +static SK_BOOL DoPrintInterfaceChange = SK_TRUE; +extern const struct ethtool_ops SkGeEthtoolOps; + +/* local variables **********************************************************/ +static uintptr_t TxQueueAddr[SK_MAX_MACS][2] = {{0x680, 0x600},{0x780, 0x700}}; +static uintptr_t RxQueueAddr[SK_MAX_MACS] = {0x400, 0x480}; + +/***************************************************************************** + * + * SkPciWriteCfgDWord - write a 32 bit value to pci config space + * + * Description: + * This routine writes a 32 bit value to the pci configuration + * space. + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +static inline int SkPciWriteCfgDWord( +SK_AC *pAC, /* Adapter Control structure pointer */ +int PciAddr, /* PCI register address */ +SK_U32 Val) /* pointer to store the read value */ +{ + pci_write_config_dword(pAC->PciDev, PciAddr, Val); + return(0); +} /* SkPciWriteCfgDWord */ + +/***************************************************************************** + * + * SkGeInitPCI - Init the PCI resources + * + * Description: + * This function initialize the PCI resources and IO + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +static __devinit int SkGeInitPCI(SK_AC *pAC) +{ + struct SK_NET_DEVICE *dev = pAC->dev[0]; + struct pci_dev *pdev = pAC->PciDev; + int retval; + + dev->mem_start = pci_resource_start (pdev, 0); + pci_set_master(pdev); + + retval = pci_request_regions(pdev, "sk98lin"); + if (retval) + goto out; + +#ifdef SK_BIG_ENDIAN + /* + * On big endian machines, we use the adapter's aibility of + * reading the descriptors as big endian. + */ + { + SK_U32 our2; + SkPciReadCfgDWord(pAC, PCI_OUR_REG_2, &our2); + our2 |= PCI_REV_DESC; + SkPciWriteCfgDWord(pAC, PCI_OUR_REG_2, our2); + } +#endif + + /* + * Remap the regs into kernel space. + */ + pAC->IoBase = ioremap_nocache(dev->mem_start, 0x4000); + if (!pAC->IoBase) { + retval = -EIO; + goto out_release; + } + + return 0; + + out_release: + pci_release_regions(pdev); + out: + return retval; +} + + +/***************************************************************************** + * + * FreeResources - release resources allocated for adapter + * + * Description: + * This function releases the IRQ, unmaps the IO and + * frees the desriptor ring. + * + * Returns: N/A + * + */ +static void FreeResources(struct SK_NET_DEVICE *dev) +{ +SK_U32 AllocFlag; +DEV_NET *pNet; +SK_AC *pAC; + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + AllocFlag = pAC->AllocFlag; + if (pAC->PciDev) { + pci_release_regions(pAC->PciDev); + } + if (AllocFlag & SK_ALLOC_IRQ) { + free_irq(dev->irq, dev); + } + if (pAC->IoBase) { + iounmap(pAC->IoBase); + } + if (pAC->pDescrMem) { + BoardFreeMem(pAC); + } + +} /* FreeResources */ + +MODULE_AUTHOR("Mirko Lindner "); +MODULE_DESCRIPTION("SysKonnect SK-NET Gigabit Ethernet SK-98xx driver"); +MODULE_LICENSE("GPL"); + +#ifdef LINK_SPEED_A +static char *Speed_A[SK_MAX_CARD_PARAM] = LINK_SPEED; +#else +static char *Speed_A[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef LINK_SPEED_B +static char *Speed_B[SK_MAX_CARD_PARAM] = LINK_SPEED; +#else +static char *Speed_B[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef AUTO_NEG_A +static char *AutoNeg_A[SK_MAX_CARD_PARAM] = AUTO_NEG_A; +#else +static char *AutoNeg_A[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef DUP_CAP_A +static char *DupCap_A[SK_MAX_CARD_PARAM] = DUP_CAP_A; +#else +static char *DupCap_A[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef FLOW_CTRL_A +static char *FlowCtrl_A[SK_MAX_CARD_PARAM] = FLOW_CTRL_A; +#else +static char *FlowCtrl_A[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef ROLE_A +static char *Role_A[SK_MAX_CARD_PARAM] = ROLE_A; +#else +static char *Role_A[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef AUTO_NEG_B +static char *AutoNeg_B[SK_MAX_CARD_PARAM] = AUTO_NEG_B; +#else +static char *AutoNeg_B[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef DUP_CAP_B +static char *DupCap_B[SK_MAX_CARD_PARAM] = DUP_CAP_B; +#else +static char *DupCap_B[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef FLOW_CTRL_B +static char *FlowCtrl_B[SK_MAX_CARD_PARAM] = FLOW_CTRL_B; +#else +static char *FlowCtrl_B[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef ROLE_B +static char *Role_B[SK_MAX_CARD_PARAM] = ROLE_B; +#else +static char *Role_B[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef CON_TYPE +static char *ConType[SK_MAX_CARD_PARAM] = CON_TYPE; +#else +static char *ConType[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef PREF_PORT +static char *PrefPort[SK_MAX_CARD_PARAM] = PREF_PORT; +#else +static char *PrefPort[SK_MAX_CARD_PARAM] = {"", }; +#endif + +#ifdef RLMT_MODE +static char *RlmtMode[SK_MAX_CARD_PARAM] = RLMT_MODE; +#else +static char *RlmtMode[SK_MAX_CARD_PARAM] = {"", }; +#endif + +static int IntsPerSec[SK_MAX_CARD_PARAM]; +static char *Moderation[SK_MAX_CARD_PARAM]; +static char *ModerationMask[SK_MAX_CARD_PARAM]; +static char *AutoSizing[SK_MAX_CARD_PARAM]; +static char *Stats[SK_MAX_CARD_PARAM]; + +module_param_array(Speed_A, charp, NULL, 0); +module_param_array(Speed_B, charp, NULL, 0); +module_param_array(AutoNeg_A, charp, NULL, 0); +module_param_array(AutoNeg_B, charp, NULL, 0); +module_param_array(DupCap_A, charp, NULL, 0); +module_param_array(DupCap_B, charp, NULL, 0); +module_param_array(FlowCtrl_A, charp, NULL, 0); +module_param_array(FlowCtrl_B, charp, NULL, 0); +module_param_array(Role_A, charp, NULL, 0); +module_param_array(Role_B, charp, NULL, 0); +module_param_array(ConType, charp, NULL, 0); +module_param_array(PrefPort, charp, NULL, 0); +module_param_array(RlmtMode, charp, NULL, 0); +/* used for interrupt moderation */ +module_param_array(IntsPerSec, int, NULL, 0); +module_param_array(Moderation, charp, NULL, 0); +module_param_array(Stats, charp, NULL, 0); +module_param_array(ModerationMask, charp, NULL, 0); +module_param_array(AutoSizing, charp, NULL, 0); + +/***************************************************************************** + * + * SkGeBoardInit - do level 0 and 1 initialization + * + * Description: + * This function prepares the board hardware for running. The desriptor + * ring is set up, the IRQ is allocated and the configuration settings + * are examined. + * + * Returns: + * 0, if everything is ok + * !=0, on error + */ +static int __devinit SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC) +{ +short i; +unsigned long Flags; +char *DescrString = "sk98lin: Driver for Linux"; /* this is given to PNMI */ +char *VerStr = VER_STRING; +int Ret; /* return code of request_irq */ +SK_BOOL DualNet; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("IoBase: %08lX\n", (unsigned long)pAC->IoBase)); + for (i=0; iTxPort[i][0].HwAddr = pAC->IoBase + TxQueueAddr[i][0]; + pAC->TxPort[i][0].PortIndex = i; + pAC->RxPort[i].HwAddr = pAC->IoBase + RxQueueAddr[i]; + pAC->RxPort[i].PortIndex = i; + } + + /* Initialize the mutexes */ + for (i=0; iTxPort[i][0].TxDesRingLock); + spin_lock_init(&pAC->RxPort[i].RxDesRingLock); + } + spin_lock_init(&pAC->SlowPathLock); + + /* setup phy_id blink timer */ + pAC->BlinkTimer.function = SkGeBlinkTimer; + pAC->BlinkTimer.data = (unsigned long) dev; + init_timer(&pAC->BlinkTimer); + + /* level 0 init common modules here */ + + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + /* Does a RESET on board ...*/ + if (SkGeInit(pAC, pAC->IoBase, SK_INIT_DATA) != 0) { + printk("HWInit (0) failed.\n"); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + return -EIO; + } + SkI2cInit( pAC, pAC->IoBase, SK_INIT_DATA); + SkEventInit(pAC, pAC->IoBase, SK_INIT_DATA); + SkPnmiInit( pAC, pAC->IoBase, SK_INIT_DATA); + SkAddrInit( pAC, pAC->IoBase, SK_INIT_DATA); + SkRlmtInit( pAC, pAC->IoBase, SK_INIT_DATA); + SkTimerInit(pAC, pAC->IoBase, SK_INIT_DATA); + + pAC->BoardLevel = SK_INIT_DATA; + pAC->RxBufSize = ETH_BUF_SIZE; + + SK_PNMI_SET_DRIVER_DESCR(pAC, DescrString); + SK_PNMI_SET_DRIVER_VER(pAC, VerStr); + + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + + /* level 1 init common modules here (HW init) */ + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + if (SkGeInit(pAC, pAC->IoBase, SK_INIT_IO) != 0) { + printk("sk98lin: HWInit (1) failed.\n"); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + return -EIO; + } + SkI2cInit( pAC, pAC->IoBase, SK_INIT_IO); + SkEventInit(pAC, pAC->IoBase, SK_INIT_IO); + SkPnmiInit( pAC, pAC->IoBase, SK_INIT_IO); + SkAddrInit( pAC, pAC->IoBase, SK_INIT_IO); + SkRlmtInit( pAC, pAC->IoBase, SK_INIT_IO); + SkTimerInit(pAC, pAC->IoBase, SK_INIT_IO); + + /* Set chipset type support */ + pAC->ChipsetType = 0; + if ((pAC->GIni.GIChipId == CHIP_ID_YUKON) || + (pAC->GIni.GIChipId == CHIP_ID_YUKON_LITE)) { + pAC->ChipsetType = 1; + } + + GetConfiguration(pAC); + if (pAC->RlmtNets == 2) { + pAC->GIni.GIPortUsage = SK_MUL_LINK; + } + + pAC->BoardLevel = SK_INIT_IO; + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + + if (pAC->GIni.GIMacsFound == 2) { + Ret = request_irq(dev->irq, SkGeIsr, IRQF_SHARED, "sk98lin", dev); + } else if (pAC->GIni.GIMacsFound == 1) { + Ret = request_irq(dev->irq, SkGeIsrOnePort, IRQF_SHARED, + "sk98lin", dev); + } else { + printk(KERN_WARNING "sk98lin: Illegal number of ports: %d\n", + pAC->GIni.GIMacsFound); + return -EIO; + } + + if (Ret) { + printk(KERN_WARNING "sk98lin: Requested IRQ %d is busy.\n", + dev->irq); + return Ret; + } + pAC->AllocFlag |= SK_ALLOC_IRQ; + + /* Alloc memory for this board (Mem for RxD/TxD) : */ + if(!BoardAllocMem(pAC)) { + printk("No memory for descriptor rings.\n"); + return -ENOMEM; + } + + BoardInitMem(pAC); + /* tschilling: New common function with minimum size check. */ + DualNet = SK_FALSE; + if (pAC->RlmtNets == 2) { + DualNet = SK_TRUE; + } + + if (SkGeInitAssignRamToQueues( + pAC, + pAC->ActivePort, + DualNet)) { + BoardFreeMem(pAC); + printk("sk98lin: SkGeInitAssignRamToQueues failed.\n"); + return -EIO; + } + + return (0); +} /* SkGeBoardInit */ + + +/***************************************************************************** + * + * BoardAllocMem - allocate the memory for the descriptor rings + * + * Description: + * This function allocates the memory for all descriptor rings. + * Each ring is aligned for the desriptor alignment and no ring + * has a 4 GByte boundary in it (because the upper 32 bit must + * be constant for all descriptiors in one rings). + * + * Returns: + * SK_TRUE, if all memory could be allocated + * SK_FALSE, if not + */ +static __devinit SK_BOOL BoardAllocMem(SK_AC *pAC) +{ +caddr_t pDescrMem; /* pointer to descriptor memory area */ +size_t AllocLength; /* length of complete descriptor area */ +int i; /* loop counter */ +unsigned long BusAddr; + + + /* rings plus one for alignment (do not cross 4 GB boundary) */ + /* RX_RING_SIZE is assumed bigger than TX_RING_SIZE */ +#if (BITS_PER_LONG == 32) + AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + 8; +#else + AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + + RX_RING_SIZE + 8; +#endif + + pDescrMem = pci_alloc_consistent(pAC->PciDev, AllocLength, + &pAC->pDescrMemDMA); + + if (pDescrMem == NULL) { + return (SK_FALSE); + } + pAC->pDescrMem = pDescrMem; + BusAddr = (unsigned long) pAC->pDescrMemDMA; + + /* Descriptors need 8 byte alignment, and this is ensured + * by pci_alloc_consistent. + */ + for (i=0; iGIni.GIMacsFound; i++) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, + ("TX%d/A: pDescrMem: %lX, PhysDescrMem: %lX\n", + i, (unsigned long) pDescrMem, + BusAddr)); + pAC->TxPort[i][0].pTxDescrRing = pDescrMem; + pAC->TxPort[i][0].VTxDescrRing = BusAddr; + pDescrMem += TX_RING_SIZE; + BusAddr += TX_RING_SIZE; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, + ("RX%d: pDescrMem: %lX, PhysDescrMem: %lX\n", + i, (unsigned long) pDescrMem, + (unsigned long)BusAddr)); + pAC->RxPort[i].pRxDescrRing = pDescrMem; + pAC->RxPort[i].VRxDescrRing = BusAddr; + pDescrMem += RX_RING_SIZE; + BusAddr += RX_RING_SIZE; + } /* for */ + + return (SK_TRUE); +} /* BoardAllocMem */ + + +/**************************************************************************** + * + * BoardFreeMem - reverse of BoardAllocMem + * + * Description: + * Free all memory allocated in BoardAllocMem: adapter context, + * descriptor rings, locks. + * + * Returns: N/A + */ +static void BoardFreeMem( +SK_AC *pAC) +{ +size_t AllocLength; /* length of complete descriptor area */ + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("BoardFreeMem\n")); +#if (BITS_PER_LONG == 32) + AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + 8; +#else + AllocLength = (RX_RING_SIZE + TX_RING_SIZE) * pAC->GIni.GIMacsFound + + RX_RING_SIZE + 8; +#endif + + pci_free_consistent(pAC->PciDev, AllocLength, + pAC->pDescrMem, pAC->pDescrMemDMA); + pAC->pDescrMem = NULL; +} /* BoardFreeMem */ + + +/***************************************************************************** + * + * BoardInitMem - initiate the descriptor rings + * + * Description: + * This function sets the descriptor rings up in memory. + * The adapter is initialized with the descriptor start addresses. + * + * Returns: N/A + */ +static __devinit void BoardInitMem(SK_AC *pAC) +{ +int i; /* loop counter */ +int RxDescrSize; /* the size of a rx descriptor rounded up to alignment*/ +int TxDescrSize; /* the size of a tx descriptor rounded up to alignment*/ + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("BoardInitMem\n")); + + RxDescrSize = (((sizeof(RXD) - 1) / DESCR_ALIGN) + 1) * DESCR_ALIGN; + pAC->RxDescrPerRing = RX_RING_SIZE / RxDescrSize; + TxDescrSize = (((sizeof(TXD) - 1) / DESCR_ALIGN) + 1) * DESCR_ALIGN; + pAC->TxDescrPerRing = TX_RING_SIZE / RxDescrSize; + + for (i=0; iGIni.GIMacsFound; i++) { + SetupRing( + pAC, + pAC->TxPort[i][0].pTxDescrRing, + pAC->TxPort[i][0].VTxDescrRing, + (RXD**)&pAC->TxPort[i][0].pTxdRingHead, + (RXD**)&pAC->TxPort[i][0].pTxdRingTail, + (RXD**)&pAC->TxPort[i][0].pTxdRingPrev, + &pAC->TxPort[i][0].TxdRingFree, + SK_TRUE); + SetupRing( + pAC, + pAC->RxPort[i].pRxDescrRing, + pAC->RxPort[i].VRxDescrRing, + &pAC->RxPort[i].pRxdRingHead, + &pAC->RxPort[i].pRxdRingTail, + &pAC->RxPort[i].pRxdRingPrev, + &pAC->RxPort[i].RxdRingFree, + SK_FALSE); + } +} /* BoardInitMem */ + + +/***************************************************************************** + * + * SetupRing - create one descriptor ring + * + * Description: + * This function creates one descriptor ring in the given memory area. + * The head, tail and number of free descriptors in the ring are set. + * + * Returns: + * none + */ +static void SetupRing( +SK_AC *pAC, +void *pMemArea, /* a pointer to the memory area for the ring */ +uintptr_t VMemArea, /* the virtual bus address of the memory area */ +RXD **ppRingHead, /* address where the head should be written */ +RXD **ppRingTail, /* address where the tail should be written */ +RXD **ppRingPrev, /* address where the tail should be written */ +int *pRingFree, /* address where the # of free descr. goes */ +SK_BOOL IsTx) /* flag: is this a tx ring */ +{ +int i; /* loop counter */ +int DescrSize; /* the size of a descriptor rounded up to alignment*/ +int DescrNum; /* number of descriptors per ring */ +RXD *pDescr; /* pointer to a descriptor (receive or transmit) */ +RXD *pNextDescr; /* pointer to the next descriptor */ +RXD *pPrevDescr; /* pointer to the previous descriptor */ +uintptr_t VNextDescr; /* the virtual bus address of the next descriptor */ + + if (IsTx == SK_TRUE) { + DescrSize = (((sizeof(TXD) - 1) / DESCR_ALIGN) + 1) * + DESCR_ALIGN; + DescrNum = TX_RING_SIZE / DescrSize; + } else { + DescrSize = (((sizeof(RXD) - 1) / DESCR_ALIGN) + 1) * + DESCR_ALIGN; + DescrNum = RX_RING_SIZE / DescrSize; + } + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, + ("Descriptor size: %d Descriptor Number: %d\n", + DescrSize,DescrNum)); + + pDescr = (RXD*) pMemArea; + pPrevDescr = NULL; + pNextDescr = (RXD*) (((char*)pDescr) + DescrSize); + VNextDescr = VMemArea + DescrSize; + for(i=0; iVNextRxd = VNextDescr & 0xffffffffULL; + pDescr->pNextRxd = pNextDescr; + if (!IsTx) pDescr->TcpSumStarts = ETH_HLEN << 16 | ETH_HLEN; + + /* advance one step */ + pPrevDescr = pDescr; + pDescr = pNextDescr; + pNextDescr = (RXD*) (((char*)pDescr) + DescrSize); + VNextDescr += DescrSize; + } + pPrevDescr->pNextRxd = (RXD*) pMemArea; + pPrevDescr->VNextRxd = VMemArea; + pDescr = (RXD*) pMemArea; + *ppRingHead = (RXD*) pMemArea; + *ppRingTail = *ppRingHead; + *ppRingPrev = pPrevDescr; + *pRingFree = DescrNum; +} /* SetupRing */ + + +/***************************************************************************** + * + * PortReInitBmu - re-initiate the descriptor rings for one port + * + * Description: + * This function reinitializes the descriptor rings of one port + * in memory. The port must be stopped before. + * The HW is initialized with the descriptor start addresses. + * + * Returns: + * none + */ +static void PortReInitBmu( +SK_AC *pAC, /* pointer to adapter context */ +int PortIndex) /* index of the port for which to re-init */ +{ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("PortReInitBmu ")); + + /* set address of first descriptor of ring in BMU */ + SK_OUT32(pAC->IoBase, TxQueueAddr[PortIndex][TX_PRIO_LOW]+ Q_DA_L, + (uint32_t)(((caddr_t) + (pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxdRingHead) - + pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxDescrRing + + pAC->TxPort[PortIndex][TX_PRIO_LOW].VTxDescrRing) & + 0xFFFFFFFF)); + SK_OUT32(pAC->IoBase, TxQueueAddr[PortIndex][TX_PRIO_LOW]+ Q_DA_H, + (uint32_t)(((caddr_t) + (pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxdRingHead) - + pAC->TxPort[PortIndex][TX_PRIO_LOW].pTxDescrRing + + pAC->TxPort[PortIndex][TX_PRIO_LOW].VTxDescrRing) >> 32)); + SK_OUT32(pAC->IoBase, RxQueueAddr[PortIndex]+Q_DA_L, + (uint32_t)(((caddr_t)(pAC->RxPort[PortIndex].pRxdRingHead) - + pAC->RxPort[PortIndex].pRxDescrRing + + pAC->RxPort[PortIndex].VRxDescrRing) & 0xFFFFFFFF)); + SK_OUT32(pAC->IoBase, RxQueueAddr[PortIndex]+Q_DA_H, + (uint32_t)(((caddr_t)(pAC->RxPort[PortIndex].pRxdRingHead) - + pAC->RxPort[PortIndex].pRxDescrRing + + pAC->RxPort[PortIndex].VRxDescrRing) >> 32)); +} /* PortReInitBmu */ + + +/**************************************************************************** + * + * SkGeIsr - handle adapter interrupts + * + * Description: + * The interrupt routine is called when the network adapter + * generates an interrupt. It may also be called if another device + * shares this interrupt vector with the driver. + * + * Returns: N/A + * + */ +static SkIsrRetVar SkGeIsr(int irq, void *dev_id) +{ +struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id; +DEV_NET *pNet; +SK_AC *pAC; +SK_U32 IntSrc; /* interrupts source register contents */ + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + + /* + * Check and process if its our interrupt + */ + SK_IN32(pAC->IoBase, B0_SP_ISRC, &IntSrc); + if (IntSrc == 0) { + return SkIsrRetNone; + } + + while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) { +#if 0 /* software irq currently not used */ + if (IntSrc & IS_IRQ_SW) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("Software IRQ\n")); + } +#endif + if (IntSrc & IS_R1_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF RX1 IRQ\n")); + ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE); + SK_PNMI_CNT_RX_INTR(pAC, 0); + } + if (IntSrc & IS_R2_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF RX2 IRQ\n")); + ReceiveIrq(pAC, &pAC->RxPort[1], SK_TRUE); + SK_PNMI_CNT_RX_INTR(pAC, 1); + } +#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */ + if (IntSrc & IS_XA1_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF AS TX1 IRQ\n")); + SK_PNMI_CNT_TX_INTR(pAC, 0); + spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock); + FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]); + spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock); + } + if (IntSrc & IS_XA2_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF AS TX2 IRQ\n")); + SK_PNMI_CNT_TX_INTR(pAC, 1); + spin_lock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock); + FreeTxDescriptors(pAC, &pAC->TxPort[1][TX_PRIO_LOW]); + spin_unlock(&pAC->TxPort[1][TX_PRIO_LOW].TxDesRingLock); + } +#if 0 /* only if sync. queues used */ + if (IntSrc & IS_XS1_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF SY TX1 IRQ\n")); + SK_PNMI_CNT_TX_INTR(pAC, 1); + spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock); + FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH); + spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock); + ClearTxIrq(pAC, 0, TX_PRIO_HIGH); + } + if (IntSrc & IS_XS2_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF SY TX2 IRQ\n")); + SK_PNMI_CNT_TX_INTR(pAC, 1); + spin_lock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock); + FreeTxDescriptors(pAC, 1, TX_PRIO_HIGH); + spin_unlock(&pAC->TxPort[1][TX_PRIO_HIGH].TxDesRingLock); + ClearTxIrq(pAC, 1, TX_PRIO_HIGH); + } +#endif +#endif + + /* do all IO at once */ + if (IntSrc & IS_R1_F) + ClearAndStartRx(pAC, 0); + if (IntSrc & IS_R2_F) + ClearAndStartRx(pAC, 1); +#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */ + if (IntSrc & IS_XA1_F) + ClearTxIrq(pAC, 0, TX_PRIO_LOW); + if (IntSrc & IS_XA2_F) + ClearTxIrq(pAC, 1, TX_PRIO_LOW); +#endif + SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc); + } /* while (IntSrc & IRQ_MASK != 0) */ + + IntSrc &= pAC->GIni.GIValIrqMask; + if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC, + ("SPECIAL IRQ DP-Cards => %x\n", IntSrc)); + pAC->CheckQueue = SK_FALSE; + spin_lock(&pAC->SlowPathLock); + if (IntSrc & SPECIAL_IRQS) + SkGeSirqIsr(pAC, pAC->IoBase, IntSrc); + + SkEventDispatcher(pAC, pAC->IoBase); + spin_unlock(&pAC->SlowPathLock); + } + /* + * do it all again is case we cleared an interrupt that + * came in after handling the ring (OUTs may be delayed + * in hardware buffers, but are through after IN) + * + * rroesler: has been commented out and shifted to + * SkGeDrvEvent(), because it is timer + * guarded now + * + ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE); + ReceiveIrq(pAC, &pAC->RxPort[1], SK_TRUE); + */ + + if (pAC->CheckQueue) { + pAC->CheckQueue = SK_FALSE; + spin_lock(&pAC->SlowPathLock); + SkEventDispatcher(pAC, pAC->IoBase); + spin_unlock(&pAC->SlowPathLock); + } + + /* IRQ is processed - Enable IRQs again*/ + SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask); + + return SkIsrRetHandled; +} /* SkGeIsr */ + + +/**************************************************************************** + * + * SkGeIsrOnePort - handle adapter interrupts for single port adapter + * + * Description: + * The interrupt routine is called when the network adapter + * generates an interrupt. It may also be called if another device + * shares this interrupt vector with the driver. + * This is the same as above, but handles only one port. + * + * Returns: N/A + * + */ +static SkIsrRetVar SkGeIsrOnePort(int irq, void *dev_id) +{ +struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id; +DEV_NET *pNet; +SK_AC *pAC; +SK_U32 IntSrc; /* interrupts source register contents */ + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + + /* + * Check and process if its our interrupt + */ + SK_IN32(pAC->IoBase, B0_SP_ISRC, &IntSrc); + if (IntSrc == 0) { + return SkIsrRetNone; + } + + while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) { +#if 0 /* software irq currently not used */ + if (IntSrc & IS_IRQ_SW) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("Software IRQ\n")); + } +#endif + if (IntSrc & IS_R1_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF RX1 IRQ\n")); + ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE); + SK_PNMI_CNT_RX_INTR(pAC, 0); + } +#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */ + if (IntSrc & IS_XA1_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF AS TX1 IRQ\n")); + SK_PNMI_CNT_TX_INTR(pAC, 0); + spin_lock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock); + FreeTxDescriptors(pAC, &pAC->TxPort[0][TX_PRIO_LOW]); + spin_unlock(&pAC->TxPort[0][TX_PRIO_LOW].TxDesRingLock); + } +#if 0 /* only if sync. queues used */ + if (IntSrc & IS_XS1_F) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_INT_SRC, + ("EOF SY TX1 IRQ\n")); + SK_PNMI_CNT_TX_INTR(pAC, 0); + spin_lock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock); + FreeTxDescriptors(pAC, 0, TX_PRIO_HIGH); + spin_unlock(&pAC->TxPort[0][TX_PRIO_HIGH].TxDesRingLock); + ClearTxIrq(pAC, 0, TX_PRIO_HIGH); + } +#endif +#endif + + /* do all IO at once */ + if (IntSrc & IS_R1_F) + ClearAndStartRx(pAC, 0); +#ifdef USE_TX_COMPLETE /* only if tx complete interrupt used */ + if (IntSrc & IS_XA1_F) + ClearTxIrq(pAC, 0, TX_PRIO_LOW); +#endif + SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc); + } /* while (IntSrc & IRQ_MASK != 0) */ + + IntSrc &= pAC->GIni.GIValIrqMask; + if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC, + ("SPECIAL IRQ SP-Cards => %x\n", IntSrc)); + pAC->CheckQueue = SK_FALSE; + spin_lock(&pAC->SlowPathLock); + if (IntSrc & SPECIAL_IRQS) + SkGeSirqIsr(pAC, pAC->IoBase, IntSrc); + + SkEventDispatcher(pAC, pAC->IoBase); + spin_unlock(&pAC->SlowPathLock); + } + /* + * do it all again is case we cleared an interrupt that + * came in after handling the ring (OUTs may be delayed + * in hardware buffers, but are through after IN) + * + * rroesler: has been commented out and shifted to + * SkGeDrvEvent(), because it is timer + * guarded now + * + ReceiveIrq(pAC, &pAC->RxPort[0], SK_TRUE); + */ + + /* IRQ is processed - Enable IRQs again*/ + SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask); + + return SkIsrRetHandled; +} /* SkGeIsrOnePort */ + +#ifdef CONFIG_NET_POLL_CONTROLLER +/**************************************************************************** + * + * SkGePollController - polling receive, for netconsole + * + * Description: + * Polling receive - used by netconsole and other diagnostic tools + * to allow network i/o with interrupts disabled. + * + * Returns: N/A + */ +static void SkGePollController(struct net_device *dev) +{ + disable_irq(dev->irq); + SkGeIsr(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +/**************************************************************************** + * + * SkGeOpen - handle start of initialized adapter + * + * Description: + * This function starts the initialized adapter. + * The board level variable is set and the adapter is + * brought to full functionality. + * The device flags are set for operation. + * Do all necessary level 2 initialization, enable interrupts and + * give start command to RLMT. + * + * Returns: + * 0 on success + * != 0 on error + */ +static int SkGeOpen( +struct SK_NET_DEVICE *dev) +{ + DEV_NET *pNet; + SK_AC *pAC; + unsigned long Flags; /* for spin lock */ + int i; + SK_EVPARA EvPara; /* an event parameter union */ + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeOpen: pAC=0x%lX:\n", (unsigned long)pAC)); + +#ifdef SK_DIAG_SUPPORT + if (pAC->DiagModeActive == DIAG_ACTIVE) { + if (pAC->Pnmi.DiagAttached == SK_DIAG_RUNNING) { + return (-1); /* still in use by diag; deny actions */ + } + } +#endif + + /* Set blink mode */ + if ((pAC->PciDev->vendor == 0x1186) || (pAC->PciDev->vendor == 0x11ab )) + pAC->GIni.GILedBlinkCtrl = OEM_CONFIG_VALUE; + + if (pAC->BoardLevel == SK_INIT_DATA) { + /* level 1 init common modules here */ + if (SkGeInit(pAC, pAC->IoBase, SK_INIT_IO) != 0) { + printk("%s: HWInit (1) failed.\n", pAC->dev[pNet->PortNr]->name); + return (-1); + } + SkI2cInit (pAC, pAC->IoBase, SK_INIT_IO); + SkEventInit (pAC, pAC->IoBase, SK_INIT_IO); + SkPnmiInit (pAC, pAC->IoBase, SK_INIT_IO); + SkAddrInit (pAC, pAC->IoBase, SK_INIT_IO); + SkRlmtInit (pAC, pAC->IoBase, SK_INIT_IO); + SkTimerInit (pAC, pAC->IoBase, SK_INIT_IO); + pAC->BoardLevel = SK_INIT_IO; + } + + if (pAC->BoardLevel != SK_INIT_RUN) { + /* tschilling: Level 2 init modules here, check return value. */ + if (SkGeInit(pAC, pAC->IoBase, SK_INIT_RUN) != 0) { + printk("%s: HWInit (2) failed.\n", pAC->dev[pNet->PortNr]->name); + return (-1); + } + SkI2cInit (pAC, pAC->IoBase, SK_INIT_RUN); + SkEventInit (pAC, pAC->IoBase, SK_INIT_RUN); + SkPnmiInit (pAC, pAC->IoBase, SK_INIT_RUN); + SkAddrInit (pAC, pAC->IoBase, SK_INIT_RUN); + SkRlmtInit (pAC, pAC->IoBase, SK_INIT_RUN); + SkTimerInit (pAC, pAC->IoBase, SK_INIT_RUN); + pAC->BoardLevel = SK_INIT_RUN; + } + + for (i=0; iGIni.GIMacsFound; i++) { + /* Enable transmit descriptor polling. */ + SkGePollTxD(pAC, pAC->IoBase, i, SK_TRUE); + FillRxRing(pAC, &pAC->RxPort[i]); + } + SkGeYellowLED(pAC, pAC->IoBase, 1); + + StartDrvCleanupTimer(pAC); + SkDimEnableModerationIfNeeded(pAC); + SkDimDisplayModerationSettings(pAC); + + pAC->GIni.GIValIrqMask &= IRQ_MASK; + + /* enable Interrupts */ + SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask); + SK_OUT32(pAC->IoBase, B0_HWE_IMSK, IRQ_HWE_MASK); + + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + + if ((pAC->RlmtMode != 0) && (pAC->MaxPorts == 0)) { + EvPara.Para32[0] = pAC->RlmtNets; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS, + EvPara); + EvPara.Para32[0] = pAC->RlmtMode; + EvPara.Para32[1] = 0; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_MODE_CHANGE, + EvPara); + } + + EvPara.Para32[0] = pNet->NetNr; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); + SkEventDispatcher(pAC, pAC->IoBase); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + + pAC->MaxPorts++; + + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeOpen suceeded\n")); + + return (0); +} /* SkGeOpen */ + + +/**************************************************************************** + * + * SkGeClose - Stop initialized adapter + * + * Description: + * Close initialized adapter. + * + * Returns: + * 0 - on success + * error code - on error + */ +static int SkGeClose( +struct SK_NET_DEVICE *dev) +{ + DEV_NET *pNet; + DEV_NET *newPtrNet; + SK_AC *pAC; + + unsigned long Flags; /* for spin lock */ + int i; + int PortIdx; + SK_EVPARA EvPara; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeClose: pAC=0x%lX ", (unsigned long)pAC)); + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + +#ifdef SK_DIAG_SUPPORT + if (pAC->DiagModeActive == DIAG_ACTIVE) { + if (pAC->DiagFlowCtrl == SK_FALSE) { + /* + ** notify that the interface which has been closed + ** by operator interaction must not be started up + ** again when the DIAG has finished. + */ + newPtrNet = netdev_priv(pAC->dev[0]); + if (newPtrNet == pNet) { + pAC->WasIfUp[0] = SK_FALSE; + } else { + pAC->WasIfUp[1] = SK_FALSE; + } + return 0; /* return to system everything is fine... */ + } else { + pAC->DiagFlowCtrl = SK_FALSE; + } + } +#endif + + netif_stop_queue(dev); + + if (pAC->RlmtNets == 1) + PortIdx = pAC->ActivePort; + else + PortIdx = pNet->NetNr; + + StopDrvCleanupTimer(pAC); + + /* + * Clear multicast table, promiscuous mode .... + */ + SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0); + SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx, + SK_PROM_MODE_NONE); + + if (pAC->MaxPorts == 1) { + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + /* disable interrupts */ + SK_OUT32(pAC->IoBase, B0_IMSK, 0); + EvPara.Para32[0] = pNet->NetNr; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + SkEventDispatcher(pAC, pAC->IoBase); + SK_OUT32(pAC->IoBase, B0_IMSK, 0); + /* stop the hardware */ + SkGeDeInit(pAC, pAC->IoBase); + pAC->BoardLevel = SK_INIT_DATA; + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + } else { + + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + EvPara.Para32[0] = pNet->NetNr; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + SkPnmiEvent(pAC, pAC->IoBase, SK_PNMI_EVT_XMAC_RESET, EvPara); + SkEventDispatcher(pAC, pAC->IoBase); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + + /* Stop port */ + spin_lock_irqsave(&pAC->TxPort[pNet->PortNr] + [TX_PRIO_LOW].TxDesRingLock, Flags); + SkGeStopPort(pAC, pAC->IoBase, pNet->PortNr, + SK_STOP_ALL, SK_HARD_RST); + spin_unlock_irqrestore(&pAC->TxPort[pNet->PortNr] + [TX_PRIO_LOW].TxDesRingLock, Flags); + } + + if (pAC->RlmtNets == 1) { + /* clear all descriptor rings */ + for (i=0; iGIni.GIMacsFound; i++) { + ReceiveIrq(pAC, &pAC->RxPort[i], SK_TRUE); + ClearRxRing(pAC, &pAC->RxPort[i]); + ClearTxRing(pAC, &pAC->TxPort[i][TX_PRIO_LOW]); + } + } else { + /* clear port descriptor rings */ + ReceiveIrq(pAC, &pAC->RxPort[pNet->PortNr], SK_TRUE); + ClearRxRing(pAC, &pAC->RxPort[pNet->PortNr]); + ClearTxRing(pAC, &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW]); + } + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeClose: done ")); + + SK_MEMSET(&(pAC->PnmiBackup), 0, sizeof(SK_PNMI_STRUCT_DATA)); + SK_MEMCPY(&(pAC->PnmiBackup), &(pAC->PnmiStruct), + sizeof(SK_PNMI_STRUCT_DATA)); + + pAC->MaxPorts--; + + return (0); +} /* SkGeClose */ + + +/***************************************************************************** + * + * SkGeXmit - Linux frame transmit function + * + * Description: + * The system calls this function to send frames onto the wire. + * It puts the frame in the tx descriptor ring. If the ring is + * full then, the 'tbusy' flag is set. + * + * Returns: + * 0, if everything is ok + * !=0, on error + * WARNING: returning 1 in 'tbusy' case caused system crashes (double + * allocated skb's) !!! + */ +static int SkGeXmit(struct sk_buff *skb, struct SK_NET_DEVICE *dev) +{ +DEV_NET *pNet; +SK_AC *pAC; +int Rc; /* return code of XmitFrame */ + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + + if ((!skb_shinfo(skb)->nr_frags) || + (pAC->GIni.GIChipId == CHIP_ID_GENESIS)) { + /* Don't activate scatter-gather and hardware checksum */ + + if (pAC->RlmtNets == 2) + Rc = XmitFrame( + pAC, + &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW], + skb); + else + Rc = XmitFrame( + pAC, + &pAC->TxPort[pAC->ActivePort][TX_PRIO_LOW], + skb); + } else { + /* scatter-gather and hardware TCP checksumming anabled*/ + if (pAC->RlmtNets == 2) + Rc = XmitFrameSG( + pAC, + &pAC->TxPort[pNet->PortNr][TX_PRIO_LOW], + skb); + else + Rc = XmitFrameSG( + pAC, + &pAC->TxPort[pAC->ActivePort][TX_PRIO_LOW], + skb); + } + + /* Transmitter out of resources? */ + if (Rc <= 0) { + netif_stop_queue(dev); + } + + /* If not taken, give buffer ownership back to the + * queueing layer. + */ + if (Rc < 0) + return (1); + + dev->trans_start = jiffies; + return (0); +} /* SkGeXmit */ + + +/***************************************************************************** + * + * XmitFrame - fill one socket buffer into the transmit ring + * + * Description: + * This function puts a message into the transmit descriptor ring + * if there is a descriptors left. + * Linux skb's consist of only one continuous buffer. + * The first step locks the ring. It is held locked + * all time to avoid problems with SWITCH_../PORT_RESET. + * Then the descriptoris allocated. + * The second part is linking the buffer to the descriptor. + * At the very last, the Control field of the descriptor + * is made valid for the BMU and a start TX command is given + * if necessary. + * + * Returns: + * > 0 - on succes: the number of bytes in the message + * = 0 - on resource shortage: this frame sent or dropped, now + * the ring is full ( -> set tbusy) + * < 0 - on failure: other problems ( -> return failure to upper layers) + */ +static int XmitFrame( +SK_AC *pAC, /* pointer to adapter context */ +TX_PORT *pTxPort, /* pointer to struct of port to send to */ +struct sk_buff *pMessage) /* pointer to send-message */ +{ + TXD *pTxd; /* the rxd to fill */ + TXD *pOldTxd; + unsigned long Flags; + SK_U64 PhysAddr; + int BytesSend = pMessage->len; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, ("X")); + + spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags); +#ifndef USE_TX_COMPLETE + FreeTxDescriptors(pAC, pTxPort); +#endif + if (pTxPort->TxdRingFree == 0) { + /* + ** no enough free descriptors in ring at the moment. + ** Maybe free'ing some old one help? + */ + FreeTxDescriptors(pAC, pTxPort); + if (pTxPort->TxdRingFree == 0) { + spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); + SK_PNMI_CNT_NO_TX_BUF(pAC, pTxPort->PortIndex); + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_TX_PROGRESS, + ("XmitFrame failed\n")); + /* + ** the desired message can not be sent + ** Because tbusy seems to be set, the message + ** should not be freed here. It will be used + ** by the scheduler of the ethernet handler + */ + return (-1); + } + } + + /* + ** If the passed socket buffer is of smaller MTU-size than 60, + ** copy everything into new buffer and fill all bytes between + ** the original packet end and the new packet end of 60 with 0x00. + ** This is to resolve faulty padding by the HW with 0xaa bytes. + */ + if (BytesSend < C_LEN_ETHERNET_MINSIZE) { + if (skb_padto(pMessage, C_LEN_ETHERNET_MINSIZE)) { + spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); + return 0; + } + pMessage->len = C_LEN_ETHERNET_MINSIZE; + } + + /* + ** advance head counter behind descriptor needed for this frame, + ** so that needed descriptor is reserved from that on. The next + ** action will be to add the passed buffer to the TX-descriptor + */ + pTxd = pTxPort->pTxdRingHead; + pTxPort->pTxdRingHead = pTxd->pNextTxd; + pTxPort->TxdRingFree--; + +#ifdef SK_DUMP_TX + DumpMsg(pMessage, "XmitFrame"); +#endif + + /* + ** First step is to map the data to be sent via the adapter onto + ** the DMA memory. Kernel 2.2 uses virt_to_bus(), but kernels 2.4 + ** and 2.6 need to use pci_map_page() for that mapping. + */ + PhysAddr = (SK_U64) pci_map_page(pAC->PciDev, + virt_to_page(pMessage->data), + ((unsigned long) pMessage->data & ~PAGE_MASK), + pMessage->len, + PCI_DMA_TODEVICE); + pTxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff); + pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32); + pTxd->pMBuf = pMessage; + + if (pMessage->ip_summed == CHECKSUM_PARTIAL) { + u16 hdrlen = skb_transport_offset(pMessage); + u16 offset = hdrlen + pMessage->csum_offset; + + if ((ipip_hdr(pMessage)->protocol == IPPROTO_UDP) && + (pAC->GIni.GIChipRev == 0) && + (pAC->GIni.GIChipId == CHIP_ID_YUKON)) { + pTxd->TBControl = BMU_TCP_CHECK; + } else { + pTxd->TBControl = BMU_UDP_CHECK; + } + + pTxd->TcpSumOfs = 0; + pTxd->TcpSumSt = hdrlen; + pTxd->TcpSumWr = offset; + + pTxd->TBControl |= BMU_OWN | BMU_STF | + BMU_SW | BMU_EOF | +#ifdef USE_TX_COMPLETE + BMU_IRQ_EOF | +#endif + pMessage->len; + } else { + pTxd->TBControl = BMU_OWN | BMU_STF | BMU_CHECK | + BMU_SW | BMU_EOF | +#ifdef USE_TX_COMPLETE + BMU_IRQ_EOF | +#endif + pMessage->len; + } + + /* + ** If previous descriptor already done, give TX start cmd + */ + pOldTxd = xchg(&pTxPort->pTxdRingPrev, pTxd); + if ((pOldTxd->TBControl & BMU_OWN) == 0) { + SK_OUT8(pTxPort->HwAddr, Q_CSR, CSR_START); + } + + /* + ** after releasing the lock, the skb may immediately be free'd + */ + spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); + if (pTxPort->TxdRingFree != 0) { + return (BytesSend); + } else { + return (0); + } + +} /* XmitFrame */ + +/***************************************************************************** + * + * XmitFrameSG - fill one socket buffer into the transmit ring + * (use SG and TCP/UDP hardware checksumming) + * + * Description: + * This function puts a message into the transmit descriptor ring + * if there is a descriptors left. + * + * Returns: + * > 0 - on succes: the number of bytes in the message + * = 0 - on resource shortage: this frame sent or dropped, now + * the ring is full ( -> set tbusy) + * < 0 - on failure: other problems ( -> return failure to upper layers) + */ +static int XmitFrameSG( +SK_AC *pAC, /* pointer to adapter context */ +TX_PORT *pTxPort, /* pointer to struct of port to send to */ +struct sk_buff *pMessage) /* pointer to send-message */ +{ + + TXD *pTxd; + TXD *pTxdFst; + TXD *pTxdLst; + int CurrFrag; + int BytesSend; + skb_frag_t *sk_frag; + SK_U64 PhysAddr; + unsigned long Flags; + SK_U32 Control; + + spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags); +#ifndef USE_TX_COMPLETE + FreeTxDescriptors(pAC, pTxPort); +#endif + if ((skb_shinfo(pMessage)->nr_frags +1) > pTxPort->TxdRingFree) { + FreeTxDescriptors(pAC, pTxPort); + if ((skb_shinfo(pMessage)->nr_frags + 1) > pTxPort->TxdRingFree) { + spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); + SK_PNMI_CNT_NO_TX_BUF(pAC, pTxPort->PortIndex); + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_TX_PROGRESS, + ("XmitFrameSG failed - Ring full\n")); + /* this message can not be sent now */ + return(-1); + } + } + + pTxd = pTxPort->pTxdRingHead; + pTxdFst = pTxd; + pTxdLst = pTxd; + BytesSend = 0; + + /* + ** Map the first fragment (header) into the DMA-space + */ + PhysAddr = (SK_U64) pci_map_page(pAC->PciDev, + virt_to_page(pMessage->data), + ((unsigned long) pMessage->data & ~PAGE_MASK), + skb_headlen(pMessage), + PCI_DMA_TODEVICE); + + pTxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff); + pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32); + + /* + ** Does the HW need to evaluate checksum for TCP or UDP packets? + */ + if (pMessage->ip_summed == CHECKSUM_PARTIAL) { + u16 hdrlen = skb_transport_offset(pMessage); + u16 offset = hdrlen + pMessage->csum_offset; + + Control = BMU_STFWD; + + /* + ** We have to use the opcode for tcp here, because the + ** opcode for udp is not working in the hardware yet + ** (Revision 2.0) + */ + if ((ipip_hdr(pMessage)->protocol == IPPROTO_UDP) && + (pAC->GIni.GIChipRev == 0) && + (pAC->GIni.GIChipId == CHIP_ID_YUKON)) { + Control |= BMU_TCP_CHECK; + } else { + Control |= BMU_UDP_CHECK; + } + + pTxd->TcpSumOfs = 0; + pTxd->TcpSumSt = hdrlen; + pTxd->TcpSumWr = offset; + } else + Control = BMU_CHECK | BMU_SW; + + pTxd->TBControl = BMU_STF | Control | skb_headlen(pMessage); + + pTxd = pTxd->pNextTxd; + pTxPort->TxdRingFree--; + BytesSend += skb_headlen(pMessage); + + /* + ** Browse over all SG fragments and map each of them into the DMA space + */ + for (CurrFrag = 0; CurrFrag < skb_shinfo(pMessage)->nr_frags; CurrFrag++) { + sk_frag = &skb_shinfo(pMessage)->frags[CurrFrag]; + /* + ** we already have the proper value in entry + */ + PhysAddr = (SK_U64) pci_map_page(pAC->PciDev, + sk_frag->page, + sk_frag->page_offset, + sk_frag->size, + PCI_DMA_TODEVICE); + + pTxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff); + pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32); + pTxd->pMBuf = pMessage; + + pTxd->TBControl = Control | BMU_OWN | sk_frag->size; + + /* + ** Do we have the last fragment? + */ + if( (CurrFrag+1) == skb_shinfo(pMessage)->nr_frags ) { +#ifdef USE_TX_COMPLETE + pTxd->TBControl |= BMU_EOF | BMU_IRQ_EOF; +#else + pTxd->TBControl |= BMU_EOF; +#endif + pTxdFst->TBControl |= BMU_OWN | BMU_SW; + } + pTxdLst = pTxd; + pTxd = pTxd->pNextTxd; + pTxPort->TxdRingFree--; + BytesSend += sk_frag->size; + } + + /* + ** If previous descriptor already done, give TX start cmd + */ + if ((pTxPort->pTxdRingPrev->TBControl & BMU_OWN) == 0) { + SK_OUT8(pTxPort->HwAddr, Q_CSR, CSR_START); + } + + pTxPort->pTxdRingPrev = pTxdLst; + pTxPort->pTxdRingHead = pTxd; + + spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); + + if (pTxPort->TxdRingFree > 0) { + return (BytesSend); + } else { + return (0); + } +} + +/***************************************************************************** + * + * FreeTxDescriptors - release descriptors from the descriptor ring + * + * Description: + * This function releases descriptors from a transmit ring if they + * have been sent by the BMU. + * If a descriptors is sent, it can be freed and the message can + * be freed, too. + * The SOFTWARE controllable bit is used to prevent running around a + * completely free ring for ever. If this bit is no set in the + * frame (by XmitFrame), this frame has never been sent or is + * already freed. + * The Tx descriptor ring lock must be held while calling this function !!! + * + * Returns: + * none + */ +static void FreeTxDescriptors( +SK_AC *pAC, /* pointer to the adapter context */ +TX_PORT *pTxPort) /* pointer to destination port structure */ +{ +TXD *pTxd; /* pointer to the checked descriptor */ +TXD *pNewTail; /* pointer to 'end' of the ring */ +SK_U32 Control; /* TBControl field of descriptor */ +SK_U64 PhysAddr; /* address of DMA mapping */ + + pNewTail = pTxPort->pTxdRingTail; + pTxd = pNewTail; + /* + ** loop forever; exits if BMU_SW bit not set in start frame + ** or BMU_OWN bit set in any frame + */ + while (1) { + Control = pTxd->TBControl; + if ((Control & BMU_SW) == 0) { + /* + ** software controllable bit is set in first + ** fragment when given to BMU. Not set means that + ** this fragment was never sent or is already + ** freed ( -> ring completely free now). + */ + pTxPort->pTxdRingTail = pTxd; + netif_wake_queue(pAC->dev[pTxPort->PortIndex]); + return; + } + if (Control & BMU_OWN) { + pTxPort->pTxdRingTail = pTxd; + if (pTxPort->TxdRingFree > 0) { + netif_wake_queue(pAC->dev[pTxPort->PortIndex]); + } + return; + } + + /* + ** release the DMA mapping, because until not unmapped + ** this buffer is considered being under control of the + ** adapter card! + */ + PhysAddr = ((SK_U64) pTxd->VDataHigh) << (SK_U64) 32; + PhysAddr |= (SK_U64) pTxd->VDataLow; + pci_unmap_page(pAC->PciDev, PhysAddr, + pTxd->pMBuf->len, + PCI_DMA_TODEVICE); + + if (Control & BMU_EOF) + DEV_KFREE_SKB_ANY(pTxd->pMBuf); /* free message */ + + pTxPort->TxdRingFree++; + pTxd->TBControl &= ~BMU_SW; + pTxd = pTxd->pNextTxd; /* point behind fragment with EOF */ + } /* while(forever) */ +} /* FreeTxDescriptors */ + +/***************************************************************************** + * + * FillRxRing - fill the receive ring with valid descriptors + * + * Description: + * This function fills the receive ring descriptors with data + * segments and makes them valid for the BMU. + * The active ring is filled completely, if possible. + * The non-active ring is filled only partial to save memory. + * + * Description of rx ring structure: + * head - points to the descriptor which will be used next by the BMU + * tail - points to the next descriptor to give to the BMU + * + * Returns: N/A + */ +static void FillRxRing( +SK_AC *pAC, /* pointer to the adapter context */ +RX_PORT *pRxPort) /* ptr to port struct for which the ring + should be filled */ +{ +unsigned long Flags; + + spin_lock_irqsave(&pRxPort->RxDesRingLock, Flags); + while (pRxPort->RxdRingFree > pRxPort->RxFillLimit) { + if(!FillRxDescriptor(pAC, pRxPort)) + break; + } + spin_unlock_irqrestore(&pRxPort->RxDesRingLock, Flags); +} /* FillRxRing */ + + +/***************************************************************************** + * + * FillRxDescriptor - fill one buffer into the receive ring + * + * Description: + * The function allocates a new receive buffer and + * puts it into the next descriptor. + * + * Returns: + * SK_TRUE - a buffer was added to the ring + * SK_FALSE - a buffer could not be added + */ +static SK_BOOL FillRxDescriptor( +SK_AC *pAC, /* pointer to the adapter context struct */ +RX_PORT *pRxPort) /* ptr to port struct of ring to fill */ +{ +struct sk_buff *pMsgBlock; /* pointer to a new message block */ +RXD *pRxd; /* the rxd to fill */ +SK_U16 Length; /* data fragment length */ +SK_U64 PhysAddr; /* physical address of a rx buffer */ + + pMsgBlock = alloc_skb(pAC->RxBufSize, GFP_ATOMIC); + if (pMsgBlock == NULL) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_ENTRY, + ("%s: Allocation of rx buffer failed !\n", + pAC->dev[pRxPort->PortIndex]->name)); + SK_PNMI_CNT_NO_RX_BUF(pAC, pRxPort->PortIndex); + return(SK_FALSE); + } + skb_reserve(pMsgBlock, 2); /* to align IP frames */ + /* skb allocated ok, so add buffer */ + pRxd = pRxPort->pRxdRingTail; + pRxPort->pRxdRingTail = pRxd->pNextRxd; + pRxPort->RxdRingFree--; + Length = pAC->RxBufSize; + PhysAddr = (SK_U64) pci_map_page(pAC->PciDev, + virt_to_page(pMsgBlock->data), + ((unsigned long) pMsgBlock->data & + ~PAGE_MASK), + pAC->RxBufSize - 2, + PCI_DMA_FROMDEVICE); + + pRxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff); + pRxd->VDataHigh = (SK_U32) (PhysAddr >> 32); + pRxd->pMBuf = pMsgBlock; + pRxd->RBControl = BMU_OWN | + BMU_STF | + BMU_IRQ_EOF | + BMU_TCP_CHECK | + Length; + return (SK_TRUE); + +} /* FillRxDescriptor */ + + +/***************************************************************************** + * + * ReQueueRxBuffer - fill one buffer back into the receive ring + * + * Description: + * Fill a given buffer back into the rx ring. The buffer + * has been previously allocated and aligned, and its phys. + * address calculated, so this is no more necessary. + * + * Returns: N/A + */ +static void ReQueueRxBuffer( +SK_AC *pAC, /* pointer to the adapter context struct */ +RX_PORT *pRxPort, /* ptr to port struct of ring to fill */ +struct sk_buff *pMsg, /* pointer to the buffer */ +SK_U32 PhysHigh, /* phys address high dword */ +SK_U32 PhysLow) /* phys address low dword */ +{ +RXD *pRxd; /* the rxd to fill */ +SK_U16 Length; /* data fragment length */ + + pRxd = pRxPort->pRxdRingTail; + pRxPort->pRxdRingTail = pRxd->pNextRxd; + pRxPort->RxdRingFree--; + Length = pAC->RxBufSize; + + pRxd->VDataLow = PhysLow; + pRxd->VDataHigh = PhysHigh; + pRxd->pMBuf = pMsg; + pRxd->RBControl = BMU_OWN | + BMU_STF | + BMU_IRQ_EOF | + BMU_TCP_CHECK | + Length; + return; +} /* ReQueueRxBuffer */ + +/***************************************************************************** + * + * ReceiveIrq - handle a receive IRQ + * + * Description: + * This function is called when a receive IRQ is set. + * It walks the receive descriptor ring and sends up all + * frames that are complete. + * + * Returns: N/A + */ +static void ReceiveIrq( + SK_AC *pAC, /* pointer to adapter context */ + RX_PORT *pRxPort, /* pointer to receive port struct */ + SK_BOOL SlowPathLock) /* indicates if SlowPathLock is needed */ +{ +RXD *pRxd; /* pointer to receive descriptors */ +SK_U32 Control; /* control field of descriptor */ +struct sk_buff *pMsg; /* pointer to message holding frame */ +struct sk_buff *pNewMsg; /* pointer to a new message for copying frame */ +int FrameLength; /* total length of received frame */ +SK_MBUF *pRlmtMbuf; /* ptr to a buffer for giving a frame to rlmt */ +SK_EVPARA EvPara; /* an event parameter union */ +unsigned long Flags; /* for spin lock */ +int PortIndex = pRxPort->PortIndex; +unsigned int Offset; +unsigned int NumBytes; +unsigned int ForRlmt; +SK_BOOL IsBc; +SK_BOOL IsMc; +SK_BOOL IsBadFrame; /* Bad frame */ + +SK_U32 FrameStat; +SK_U64 PhysAddr; + +rx_start: + /* do forever; exit if BMU_OWN found */ + for ( pRxd = pRxPort->pRxdRingHead ; + pRxPort->RxdRingFree < pAC->RxDescrPerRing ; + pRxd = pRxd->pNextRxd, + pRxPort->pRxdRingHead = pRxd, + pRxPort->RxdRingFree ++) { + + /* + * For a better understanding of this loop + * Go through every descriptor beginning at the head + * Please note: the ring might be completely received so the OWN bit + * set is not a good crirteria to leave that loop. + * Therefore the RingFree counter is used. + * On entry of this loop pRxd is a pointer to the Rxd that needs + * to be checked next. + */ + + Control = pRxd->RBControl; + + /* check if this descriptor is ready */ + if ((Control & BMU_OWN) != 0) { + /* this descriptor is not yet ready */ + /* This is the usual end of the loop */ + /* We don't need to start the ring again */ + FillRxRing(pAC, pRxPort); + return; + } + pAC->DynIrqModInfo.NbrProcessedDescr++; + + /* get length of frame and check it */ + FrameLength = Control & BMU_BBC; + if (FrameLength > pAC->RxBufSize) { + goto rx_failed; + } + + /* check for STF and EOF */ + if ((Control & (BMU_STF | BMU_EOF)) != (BMU_STF | BMU_EOF)) { + goto rx_failed; + } + + /* here we have a complete frame in the ring */ + pMsg = pRxd->pMBuf; + + FrameStat = pRxd->FrameStat; + + /* check for frame length mismatch */ +#define XMR_FS_LEN_SHIFT 18 +#define GMR_FS_LEN_SHIFT 16 + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { + if (FrameLength != (SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT)) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_RX_PROGRESS, + ("skge: Frame length mismatch (%u/%u).\n", + FrameLength, + (SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT))); + goto rx_failed; + } + } + else { + if (FrameLength != (SK_U32) (FrameStat >> GMR_FS_LEN_SHIFT)) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_RX_PROGRESS, + ("skge: Frame length mismatch (%u/%u).\n", + FrameLength, + (SK_U32) (FrameStat >> XMR_FS_LEN_SHIFT))); + goto rx_failed; + } + } + + /* Set Rx Status */ + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { + IsBc = (FrameStat & XMR_FS_BC) != 0; + IsMc = (FrameStat & XMR_FS_MC) != 0; + IsBadFrame = (FrameStat & + (XMR_FS_ANY_ERR | XMR_FS_2L_VLAN)) != 0; + } else { + IsBc = (FrameStat & GMR_FS_BC) != 0; + IsMc = (FrameStat & GMR_FS_MC) != 0; + IsBadFrame = (((FrameStat & GMR_FS_ANY_ERR) != 0) || + ((FrameStat & GMR_FS_RX_OK) == 0)); + } + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 0, + ("Received frame of length %d on port %d\n", + FrameLength, PortIndex)); + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 0, + ("Number of free rx descriptors: %d\n", + pRxPort->RxdRingFree)); +/* DumpMsg(pMsg, "Rx"); */ + + if ((Control & BMU_STAT_VAL) != BMU_STAT_VAL || (IsBadFrame)) { +#if 0 + (FrameStat & (XMR_FS_ANY_ERR | XMR_FS_2L_VLAN)) != 0) { +#endif + /* there is a receive error in this frame */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_RX_PROGRESS, + ("skge: Error in received frame, dropped!\n" + "Control: %x\nRxStat: %x\n", + Control, FrameStat)); + + ReQueueRxBuffer(pAC, pRxPort, pMsg, + pRxd->VDataHigh, pRxd->VDataLow); + + continue; + } + + /* + * if short frame then copy data to reduce memory waste + */ + if ((FrameLength < SK_COPY_THRESHOLD) && + ((pNewMsg = alloc_skb(FrameLength+2, GFP_ATOMIC)) != NULL)) { + /* + * Short frame detected and allocation successfull + */ + /* use new skb and copy data */ + skb_reserve(pNewMsg, 2); + skb_put(pNewMsg, FrameLength); + PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32; + PhysAddr |= (SK_U64) pRxd->VDataLow; + + pci_dma_sync_single_for_cpu(pAC->PciDev, + (dma_addr_t) PhysAddr, + FrameLength, + PCI_DMA_FROMDEVICE); + skb_copy_to_linear_data(pNewMsg, pMsg, FrameLength); + + pci_dma_sync_single_for_device(pAC->PciDev, + (dma_addr_t) PhysAddr, + FrameLength, + PCI_DMA_FROMDEVICE); + ReQueueRxBuffer(pAC, pRxPort, pMsg, + pRxd->VDataHigh, pRxd->VDataLow); + + pMsg = pNewMsg; + + } + else { + /* + * if large frame, or SKB allocation failed, pass + * the SKB directly to the networking + */ + + PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32; + PhysAddr |= (SK_U64) pRxd->VDataLow; + + /* release the DMA mapping */ + pci_unmap_single(pAC->PciDev, + PhysAddr, + pAC->RxBufSize - 2, + PCI_DMA_FROMDEVICE); + + /* set length in message */ + skb_put(pMsg, FrameLength); + } /* frame > SK_COPY_TRESHOLD */ + +#ifdef USE_SK_RX_CHECKSUM + pMsg->csum = pRxd->TcpSums & 0xffff; + pMsg->ip_summed = CHECKSUM_COMPLETE; +#else + pMsg->ip_summed = CHECKSUM_NONE; +#endif + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("V")); + ForRlmt = SK_RLMT_RX_PROTOCOL; +#if 0 + IsBc = (FrameStat & XMR_FS_BC)==XMR_FS_BC; +#endif + SK_RLMT_PRE_LOOKAHEAD(pAC, PortIndex, FrameLength, + IsBc, &Offset, &NumBytes); + if (NumBytes != 0) { +#if 0 + IsMc = (FrameStat & XMR_FS_MC)==XMR_FS_MC; +#endif + SK_RLMT_LOOKAHEAD(pAC, PortIndex, + &pMsg->data[Offset], + IsBc, IsMc, &ForRlmt); + } + if (ForRlmt == SK_RLMT_RX_PROTOCOL) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("W")); + /* send up only frames from active port */ + if ((PortIndex == pAC->ActivePort) || + (pAC->RlmtNets == 2)) { + /* frame for upper layer */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("U")); +#ifdef xDEBUG + DumpMsg(pMsg, "Rx"); +#endif + SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC, + FrameLength, pRxPort->PortIndex); + + pMsg->protocol = eth_type_trans(pMsg, + pAC->dev[pRxPort->PortIndex]); + netif_rx(pMsg); + pAC->dev[pRxPort->PortIndex]->last_rx = jiffies; + } + else { + /* drop frame */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_RX_PROGRESS, + ("D")); + DEV_KFREE_SKB(pMsg); + } + + } /* if not for rlmt */ + else { + /* packet for rlmt */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_RX_PROGRESS, ("R")); + pRlmtMbuf = SkDrvAllocRlmtMbuf(pAC, + pAC->IoBase, FrameLength); + if (pRlmtMbuf != NULL) { + pRlmtMbuf->pNext = NULL; + pRlmtMbuf->Length = FrameLength; + pRlmtMbuf->PortIdx = PortIndex; + EvPara.pParaPtr = pRlmtMbuf; + memcpy((char*)(pRlmtMbuf->pData), + (char*)(pMsg->data), + FrameLength); + + /* SlowPathLock needed? */ + if (SlowPathLock == SK_TRUE) { + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + SkEventQueue(pAC, SKGE_RLMT, + SK_RLMT_PACKET_RECEIVED, + EvPara); + pAC->CheckQueue = SK_TRUE; + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + } else { + SkEventQueue(pAC, SKGE_RLMT, + SK_RLMT_PACKET_RECEIVED, + EvPara); + pAC->CheckQueue = SK_TRUE; + } + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBGCAT_DRV_RX_PROGRESS, + ("Q")); + } + if ((pAC->dev[pRxPort->PortIndex]->flags & + (IFF_PROMISC | IFF_ALLMULTI)) != 0 || + (ForRlmt & SK_RLMT_RX_PROTOCOL) == + SK_RLMT_RX_PROTOCOL) { + pMsg->protocol = eth_type_trans(pMsg, + pAC->dev[pRxPort->PortIndex]); + netif_rx(pMsg); + pAC->dev[pRxPort->PortIndex]->last_rx = jiffies; + } + else { + DEV_KFREE_SKB(pMsg); + } + + } /* if packet for rlmt */ + } /* for ... scanning the RXD ring */ + + /* RXD ring is empty -> fill and restart */ + FillRxRing(pAC, pRxPort); + /* do not start if called from Close */ + if (pAC->BoardLevel > SK_INIT_DATA) { + ClearAndStartRx(pAC, PortIndex); + } + return; + +rx_failed: + /* remove error frame */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ERROR, + ("Schrottdescriptor, length: 0x%x\n", FrameLength)); + + /* release the DMA mapping */ + + PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32; + PhysAddr |= (SK_U64) pRxd->VDataLow; + pci_unmap_page(pAC->PciDev, + PhysAddr, + pAC->RxBufSize - 2, + PCI_DMA_FROMDEVICE); + DEV_KFREE_SKB_IRQ(pRxd->pMBuf); + pRxd->pMBuf = NULL; + pRxPort->RxdRingFree++; + pRxPort->pRxdRingHead = pRxd->pNextRxd; + goto rx_start; + +} /* ReceiveIrq */ + + +/***************************************************************************** + * + * ClearAndStartRx - give a start receive command to BMU, clear IRQ + * + * Description: + * This function sends a start command and a clear interrupt + * command for one receive queue to the BMU. + * + * Returns: N/A + * none + */ +static void ClearAndStartRx( +SK_AC *pAC, /* pointer to the adapter context */ +int PortIndex) /* index of the receive port (XMAC) */ +{ + SK_OUT8(pAC->IoBase, + RxQueueAddr[PortIndex]+Q_CSR, + CSR_START | CSR_IRQ_CL_F); +} /* ClearAndStartRx */ + + +/***************************************************************************** + * + * ClearTxIrq - give a clear transmit IRQ command to BMU + * + * Description: + * This function sends a clear tx IRQ command for one + * transmit queue to the BMU. + * + * Returns: N/A + */ +static void ClearTxIrq( +SK_AC *pAC, /* pointer to the adapter context */ +int PortIndex, /* index of the transmit port (XMAC) */ +int Prio) /* priority or normal queue */ +{ + SK_OUT8(pAC->IoBase, + TxQueueAddr[PortIndex][Prio]+Q_CSR, + CSR_IRQ_CL_F); +} /* ClearTxIrq */ + + +/***************************************************************************** + * + * ClearRxRing - remove all buffers from the receive ring + * + * Description: + * This function removes all receive buffers from the ring. + * The receive BMU must be stopped before calling this function. + * + * Returns: N/A + */ +static void ClearRxRing( +SK_AC *pAC, /* pointer to adapter context */ +RX_PORT *pRxPort) /* pointer to rx port struct */ +{ +RXD *pRxd; /* pointer to the current descriptor */ +unsigned long Flags; +SK_U64 PhysAddr; + + if (pRxPort->RxdRingFree == pAC->RxDescrPerRing) { + return; + } + spin_lock_irqsave(&pRxPort->RxDesRingLock, Flags); + pRxd = pRxPort->pRxdRingHead; + do { + if (pRxd->pMBuf != NULL) { + + PhysAddr = ((SK_U64) pRxd->VDataHigh) << (SK_U64)32; + PhysAddr |= (SK_U64) pRxd->VDataLow; + pci_unmap_page(pAC->PciDev, + PhysAddr, + pAC->RxBufSize - 2, + PCI_DMA_FROMDEVICE); + DEV_KFREE_SKB(pRxd->pMBuf); + pRxd->pMBuf = NULL; + } + pRxd->RBControl &= BMU_OWN; + pRxd = pRxd->pNextRxd; + pRxPort->RxdRingFree++; + } while (pRxd != pRxPort->pRxdRingTail); + pRxPort->pRxdRingTail = pRxPort->pRxdRingHead; + spin_unlock_irqrestore(&pRxPort->RxDesRingLock, Flags); +} /* ClearRxRing */ + +/***************************************************************************** + * + * ClearTxRing - remove all buffers from the transmit ring + * + * Description: + * This function removes all transmit buffers from the ring. + * The transmit BMU must be stopped before calling this function + * and transmitting at the upper level must be disabled. + * The BMU own bit of all descriptors is cleared, the rest is + * done by calling FreeTxDescriptors. + * + * Returns: N/A + */ +static void ClearTxRing( +SK_AC *pAC, /* pointer to adapter context */ +TX_PORT *pTxPort) /* pointer to tx prt struct */ +{ +TXD *pTxd; /* pointer to the current descriptor */ +int i; +unsigned long Flags; + + spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags); + pTxd = pTxPort->pTxdRingHead; + for (i=0; iTxDescrPerRing; i++) { + pTxd->TBControl &= ~BMU_OWN; + pTxd = pTxd->pNextTxd; + } + FreeTxDescriptors(pAC, pTxPort); + spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); +} /* ClearTxRing */ + +/***************************************************************************** + * + * SkGeSetMacAddr - Set the hardware MAC address + * + * Description: + * This function sets the MAC address used by the adapter. + * + * Returns: + * 0, if everything is ok + * !=0, on error + */ +static int SkGeSetMacAddr(struct SK_NET_DEVICE *dev, void *p) +{ + +DEV_NET *pNet = netdev_priv(dev); +SK_AC *pAC = pNet->pAC; + +struct sockaddr *addr = p; +unsigned long Flags; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeSetMacAddr starts now...\n")); + if(netif_running(dev)) + return -EBUSY; + + memcpy(dev->dev_addr, addr->sa_data,dev->addr_len); + + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + + if (pAC->RlmtNets == 2) + SkAddrOverride(pAC, pAC->IoBase, pNet->NetNr, + (SK_MAC_ADDR*)dev->dev_addr, SK_ADDR_VIRTUAL_ADDRESS); + else + SkAddrOverride(pAC, pAC->IoBase, pAC->ActivePort, + (SK_MAC_ADDR*)dev->dev_addr, SK_ADDR_VIRTUAL_ADDRESS); + + + + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + return 0; +} /* SkGeSetMacAddr */ + + +/***************************************************************************** + * + * SkGeSetRxMode - set receive mode + * + * Description: + * This function sets the receive mode of an adapter. The adapter + * supports promiscuous mode, allmulticast mode and a number of + * multicast addresses. If more multicast addresses the available + * are selected, a hash function in the hardware is used. + * + * Returns: + * 0, if everything is ok + * !=0, on error + */ +static void SkGeSetRxMode(struct SK_NET_DEVICE *dev) +{ + +DEV_NET *pNet; +SK_AC *pAC; + +struct dev_mc_list *pMcList; +int i; +int PortIdx; +unsigned long Flags; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeSetRxMode starts now... ")); + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + if (pAC->RlmtNets == 1) + PortIdx = pAC->ActivePort; + else + PortIdx = pNet->NetNr; + + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + if (dev->flags & IFF_PROMISC) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("PROMISCUOUS mode\n")); + SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx, + SK_PROM_MODE_LLC); + } else if (dev->flags & IFF_ALLMULTI) { + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("ALLMULTI mode\n")); + SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx, + SK_PROM_MODE_ALL_MC); + } else { + SkAddrPromiscuousChange(pAC, pAC->IoBase, PortIdx, + SK_PROM_MODE_NONE); + SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0); + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("Number of MC entries: %d ", dev->mc_count)); + + pMcList = dev->mc_list; + for (i=0; imc_count; i++, pMcList = pMcList->next) { + SkAddrMcAdd(pAC, pAC->IoBase, PortIdx, + (SK_MAC_ADDR*)pMcList->dmi_addr, 0); + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_MCA, + ("%02x:%02x:%02x:%02x:%02x:%02x\n", + pMcList->dmi_addr[0], + pMcList->dmi_addr[1], + pMcList->dmi_addr[2], + pMcList->dmi_addr[3], + pMcList->dmi_addr[4], + pMcList->dmi_addr[5])); + } + SkAddrMcUpdate(pAC, pAC->IoBase, PortIdx); + } + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + + return; +} /* SkGeSetRxMode */ + + +/***************************************************************************** + * + * SkGeChangeMtu - set the MTU to another value + * + * Description: + * This function sets is called whenever the MTU size is changed + * (ifconfig mtu xxx dev ethX). If the MTU is bigger than standard + * ethernet MTU size, long frame support is activated. + * + * Returns: + * 0, if everything is ok + * !=0, on error + */ +static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int NewMtu) +{ +DEV_NET *pNet; +struct net_device *pOtherDev; +SK_AC *pAC; +unsigned long Flags; +int i; +SK_EVPARA EvPara; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeChangeMtu starts now...\n")); + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + + if ((NewMtu < 68) || (NewMtu > SK_JUMBO_MTU)) { + return -EINVAL; + } + + if(pAC->BoardLevel != SK_INIT_RUN) { + return -EINVAL; + } + +#ifdef SK_DIAG_SUPPORT + if (pAC->DiagModeActive == DIAG_ACTIVE) { + if (pAC->DiagFlowCtrl == SK_FALSE) { + return -1; /* still in use, deny any actions of MTU */ + } else { + pAC->DiagFlowCtrl = SK_FALSE; + } + } +#endif + + pOtherDev = pAC->dev[1 - pNet->NetNr]; + + if ( netif_running(pOtherDev) && (pOtherDev->mtu > 1500) + && (NewMtu <= 1500)) + return 0; + + pAC->RxBufSize = NewMtu + 32; + dev->mtu = NewMtu; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("New MTU: %d\n", NewMtu)); + + /* + ** Prevent any reconfiguration while changing the MTU + ** by disabling any interrupts + */ + SK_OUT32(pAC->IoBase, B0_IMSK, 0); + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + + /* + ** Notify RLMT that any ports are to be stopped + */ + EvPara.Para32[0] = 0; + EvPara.Para32[1] = -1; + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + EvPara.Para32[0] = 1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + } else { + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + } + + /* + ** After calling the SkEventDispatcher(), RLMT is aware about + ** the stopped ports -> configuration can take place! + */ + SkEventDispatcher(pAC, pAC->IoBase); + + for (i=0; iGIni.GIMacsFound; i++) { + spin_lock(&pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock); + netif_stop_queue(pAC->dev[i]); + + } + + /* + ** Depending on the desired MTU size change, a different number of + ** RX buffers need to be allocated + */ + if (NewMtu > 1500) { + /* + ** Use less rx buffers + */ + for (i=0; iGIni.GIMacsFound; i++) { + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { + pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - + (pAC->RxDescrPerRing / 4); + } else { + if (i == pAC->ActivePort) { + pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - + (pAC->RxDescrPerRing / 4); + } else { + pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - + (pAC->RxDescrPerRing / 10); + } + } + } + } else { + /* + ** Use the normal amount of rx buffers + */ + for (i=0; iGIni.GIMacsFound; i++) { + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { + pAC->RxPort[i].RxFillLimit = 1; + } else { + if (i == pAC->ActivePort) { + pAC->RxPort[i].RxFillLimit = 1; + } else { + pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - + (pAC->RxDescrPerRing / 4); + } + } + } + } + + SkGeDeInit(pAC, pAC->IoBase); + + /* + ** enable/disable hardware support for long frames + */ + if (NewMtu > 1500) { +// pAC->JumboActivated = SK_TRUE; /* is never set back !!! */ + pAC->GIni.GIPortUsage = SK_JUMBO_LINK; + } else { + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { + pAC->GIni.GIPortUsage = SK_MUL_LINK; + } else { + pAC->GIni.GIPortUsage = SK_RED_LINK; + } + } + + SkGeInit( pAC, pAC->IoBase, SK_INIT_IO); + SkI2cInit( pAC, pAC->IoBase, SK_INIT_IO); + SkEventInit(pAC, pAC->IoBase, SK_INIT_IO); + SkPnmiInit( pAC, pAC->IoBase, SK_INIT_IO); + SkAddrInit( pAC, pAC->IoBase, SK_INIT_IO); + SkRlmtInit( pAC, pAC->IoBase, SK_INIT_IO); + SkTimerInit(pAC, pAC->IoBase, SK_INIT_IO); + + /* + ** tschilling: + ** Speed and others are set back to default in level 1 init! + */ + GetConfiguration(pAC); + + SkGeInit( pAC, pAC->IoBase, SK_INIT_RUN); + SkI2cInit( pAC, pAC->IoBase, SK_INIT_RUN); + SkEventInit(pAC, pAC->IoBase, SK_INIT_RUN); + SkPnmiInit( pAC, pAC->IoBase, SK_INIT_RUN); + SkAddrInit( pAC, pAC->IoBase, SK_INIT_RUN); + SkRlmtInit( pAC, pAC->IoBase, SK_INIT_RUN); + SkTimerInit(pAC, pAC->IoBase, SK_INIT_RUN); + + /* + ** clear and reinit the rx rings here + */ + for (i=0; iGIni.GIMacsFound; i++) { + ReceiveIrq(pAC, &pAC->RxPort[i], SK_TRUE); + ClearRxRing(pAC, &pAC->RxPort[i]); + FillRxRing(pAC, &pAC->RxPort[i]); + + /* + ** Enable transmit descriptor polling + */ + SkGePollTxD(pAC, pAC->IoBase, i, SK_TRUE); + FillRxRing(pAC, &pAC->RxPort[i]); + }; + + SkGeYellowLED(pAC, pAC->IoBase, 1); + SkDimEnableModerationIfNeeded(pAC); + SkDimDisplayModerationSettings(pAC); + + netif_start_queue(pAC->dev[pNet->PortNr]); + for (i=pAC->GIni.GIMacsFound-1; i>=0; i--) { + spin_unlock(&pAC->TxPort[i][TX_PRIO_LOW].TxDesRingLock); + } + + /* + ** Enable Interrupts again + */ + SK_OUT32(pAC->IoBase, B0_IMSK, pAC->GIni.GIValIrqMask); + SK_OUT32(pAC->IoBase, B0_HWE_IMSK, IRQ_HWE_MASK); + + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); + SkEventDispatcher(pAC, pAC->IoBase); + + /* + ** Notify RLMT about the changing and restarting one (or more) ports + */ + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { + EvPara.Para32[0] = pAC->RlmtNets; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS, EvPara); + EvPara.Para32[0] = pNet->PortNr; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); + + if (netif_running(pOtherDev)) { + DEV_NET *pOtherNet = netdev_priv(pOtherDev); + EvPara.Para32[0] = pOtherNet->PortNr; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); + } + } else { + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); + } + + SkEventDispatcher(pAC, pAC->IoBase); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + + /* + ** While testing this driver with latest kernel 2.5 (2.5.70), it + ** seems as if upper layers have a problem to handle a successful + ** return value of '0'. If such a zero is returned, the complete + ** system hangs for several minutes (!), which is in acceptable. + ** + ** Currently it is not clear, what the exact reason for this problem + ** is. The implemented workaround for 2.5 is to return the desired + ** new MTU size if all needed changes for the new MTU size where + ** performed. In kernels 2.2 and 2.4, a zero value is returned, + ** which indicates the successful change of the mtu-size. + */ + return NewMtu; + +} /* SkGeChangeMtu */ + + +/***************************************************************************** + * + * SkGeStats - return ethernet device statistics + * + * Description: + * This function return statistic data about the ethernet device + * to the operating system. + * + * Returns: + * pointer to the statistic structure. + */ +static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev) +{ +DEV_NET *pNet = netdev_priv(dev); +SK_AC *pAC = pNet->pAC; +SK_PNMI_STRUCT_DATA *pPnmiStruct; /* structure for all Pnmi-Data */ +SK_PNMI_STAT *pPnmiStat; /* pointer to virtual XMAC stat. data */ +SK_PNMI_CONF *pPnmiConf; /* pointer to virtual link config. */ +unsigned int Size; /* size of pnmi struct */ +unsigned long Flags; /* for spin lock */ + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeStats starts now...\n")); + pPnmiStruct = &pAC->PnmiStruct; + +#ifdef SK_DIAG_SUPPORT + if ((pAC->DiagModeActive == DIAG_NOTACTIVE) && + (pAC->BoardLevel == SK_INIT_RUN)) { +#endif + SK_MEMSET(pPnmiStruct, 0, sizeof(SK_PNMI_STRUCT_DATA)); + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + Size = SK_PNMI_STRUCT_SIZE; + SkPnmiGetStruct(pAC, pAC->IoBase, pPnmiStruct, &Size, pNet->NetNr); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); +#ifdef SK_DIAG_SUPPORT + } +#endif + + pPnmiStat = &pPnmiStruct->Stat[0]; + pPnmiConf = &pPnmiStruct->Conf[0]; + + pAC->stats.rx_packets = (SK_U32) pPnmiStruct->RxDeliveredCts & 0xFFFFFFFF; + pAC->stats.tx_packets = (SK_U32) pPnmiStat->StatTxOkCts & 0xFFFFFFFF; + pAC->stats.rx_bytes = (SK_U32) pPnmiStruct->RxOctetsDeliveredCts; + pAC->stats.tx_bytes = (SK_U32) pPnmiStat->StatTxOctetsOkCts; + + if (dev->mtu <= 1500) { + pAC->stats.rx_errors = (SK_U32) pPnmiStruct->InErrorsCts & 0xFFFFFFFF; + } else { + pAC->stats.rx_errors = (SK_U32) ((pPnmiStruct->InErrorsCts - + pPnmiStat->StatRxTooLongCts) & 0xFFFFFFFF); + } + + + if (pAC->GIni.GP[0].PhyType == SK_PHY_XMAC && pAC->HWRevision < 12) + pAC->stats.rx_errors = pAC->stats.rx_errors - pPnmiStat->StatRxShortsCts; + + pAC->stats.tx_errors = (SK_U32) pPnmiStat->StatTxSingleCollisionCts & 0xFFFFFFFF; + pAC->stats.rx_dropped = (SK_U32) pPnmiStruct->RxNoBufCts & 0xFFFFFFFF; + pAC->stats.tx_dropped = (SK_U32) pPnmiStruct->TxNoBufCts & 0xFFFFFFFF; + pAC->stats.multicast = (SK_U32) pPnmiStat->StatRxMulticastOkCts & 0xFFFFFFFF; + pAC->stats.collisions = (SK_U32) pPnmiStat->StatTxSingleCollisionCts & 0xFFFFFFFF; + + /* detailed rx_errors: */ + pAC->stats.rx_length_errors = (SK_U32) pPnmiStat->StatRxRuntCts & 0xFFFFFFFF; + pAC->stats.rx_over_errors = (SK_U32) pPnmiStat->StatRxFifoOverflowCts & 0xFFFFFFFF; + pAC->stats.rx_crc_errors = (SK_U32) pPnmiStat->StatRxFcsCts & 0xFFFFFFFF; + pAC->stats.rx_frame_errors = (SK_U32) pPnmiStat->StatRxFramingCts & 0xFFFFFFFF; + pAC->stats.rx_fifo_errors = (SK_U32) pPnmiStat->StatRxFifoOverflowCts & 0xFFFFFFFF; + pAC->stats.rx_missed_errors = (SK_U32) pPnmiStat->StatRxMissedCts & 0xFFFFFFFF; + + /* detailed tx_errors */ + pAC->stats.tx_aborted_errors = (SK_U32) 0; + pAC->stats.tx_carrier_errors = (SK_U32) pPnmiStat->StatTxCarrierCts & 0xFFFFFFFF; + pAC->stats.tx_fifo_errors = (SK_U32) pPnmiStat->StatTxFifoUnderrunCts & 0xFFFFFFFF; + pAC->stats.tx_heartbeat_errors = (SK_U32) pPnmiStat->StatTxCarrierCts & 0xFFFFFFFF; + pAC->stats.tx_window_errors = (SK_U32) 0; + + return(&pAC->stats); +} /* SkGeStats */ + +/* + * Basic MII register access + */ +static int SkGeMiiIoctl(struct net_device *dev, + struct mii_ioctl_data *data, int cmd) +{ + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + SK_IOC IoC = pAC->IoBase; + int Port = pNet->PortNr; + SK_GEPORT *pPrt = &pAC->GIni.GP[Port]; + unsigned long Flags; + int err = 0; + int reg = data->reg_num & 0x1f; + SK_U16 val = data->val_in; + + if (!netif_running(dev)) + return -ENODEV; /* Phy still in reset */ + + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + switch(cmd) { + case SIOCGMIIPHY: + data->phy_id = pPrt->PhyAddr; + + /* fallthru */ + case SIOCGMIIREG: + if (pAC->GIni.GIGenesis) + SkXmPhyRead(pAC, IoC, Port, reg, &val); + else + SkGmPhyRead(pAC, IoC, Port, reg, &val); + + data->val_out = val; + break; + + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + err = -EPERM; + + else if (pAC->GIni.GIGenesis) + SkXmPhyWrite(pAC, IoC, Port, reg, val); + else + SkGmPhyWrite(pAC, IoC, Port, reg, val); + break; + default: + err = -EOPNOTSUPP; + } + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + return err; +} + + +/***************************************************************************** + * + * SkGeIoctl - IO-control function + * + * Description: + * This function is called if an ioctl is issued on the device. + * There are three subfunction for reading, writing and test-writing + * the private MIB data structure (useful for SysKonnect-internal tools). + * + * Returns: + * 0, if everything is ok + * !=0, on error + */ +static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd) +{ +DEV_NET *pNet; +SK_AC *pAC; +void *pMemBuf; +struct pci_dev *pdev = NULL; +SK_GE_IOCTL Ioctl; +unsigned int Err = 0; +int Size = 0; +int Ret = 0; +unsigned int Length = 0; +int HeaderLength = sizeof(SK_U32) + sizeof(SK_U32); + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeIoctl starts now...\n")); + + pNet = netdev_priv(dev); + pAC = pNet->pAC; + + if (cmd == SIOCGMIIPHY || cmd == SIOCSMIIREG || cmd == SIOCGMIIREG) + return SkGeMiiIoctl(dev, if_mii(rq), cmd); + + if(copy_from_user(&Ioctl, rq->ifr_data, sizeof(SK_GE_IOCTL))) { + return -EFAULT; + } + + switch(cmd) { + case SK_IOCTL_SETMIB: + case SK_IOCTL_PRESETMIB: + if (!capable(CAP_NET_ADMIN)) return -EPERM; + case SK_IOCTL_GETMIB: + if(copy_from_user(&pAC->PnmiStruct, Ioctl.pData, + Ioctl.LenPnmiStruct)? + Ioctl.Len : sizeof(pAC->PnmiStruct))) { + return -EFAULT; + } + Size = SkGeIocMib(pNet, Ioctl.Len, cmd); + if(copy_to_user(Ioctl.pData, &pAC->PnmiStruct, + Ioctl.Lenifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) { + return -EFAULT; + } + break; + case SK_IOCTL_GEN: + if (Ioctl.Len < (sizeof(pAC->PnmiStruct) + HeaderLength)) { + Length = Ioctl.Len; + } else { + Length = sizeof(pAC->PnmiStruct) + HeaderLength; + } + if (NULL == (pMemBuf = kmalloc(Length, GFP_KERNEL))) { + return -ENOMEM; + } + if(copy_from_user(pMemBuf, Ioctl.pData, Length)) { + Err = -EFAULT; + goto fault_gen; + } + if ((Ret = SkPnmiGenIoctl(pAC, pAC->IoBase, pMemBuf, &Length, 0)) < 0) { + Err = -EFAULT; + goto fault_gen; + } + if(copy_to_user(Ioctl.pData, pMemBuf, Length) ) { + Err = -EFAULT; + goto fault_gen; + } + Ioctl.Len = Length; + if(copy_to_user(rq->ifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) { + Err = -EFAULT; + goto fault_gen; + } +fault_gen: + kfree(pMemBuf); /* cleanup everything */ + break; +#ifdef SK_DIAG_SUPPORT + case SK_IOCTL_DIAG: + if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (Ioctl.Len < (sizeof(pAC->PnmiStruct) + HeaderLength)) { + Length = Ioctl.Len; + } else { + Length = sizeof(pAC->PnmiStruct) + HeaderLength; + } + if (NULL == (pMemBuf = kmalloc(Length, GFP_KERNEL))) { + return -ENOMEM; + } + if(copy_from_user(pMemBuf, Ioctl.pData, Length)) { + Err = -EFAULT; + goto fault_diag; + } + pdev = pAC->PciDev; + Length = 3 * sizeof(SK_U32); /* Error, Bus and Device */ + /* + ** While coding this new IOCTL interface, only a few lines of code + ** are to to be added. Therefore no dedicated function has been + ** added. If more functionality is added, a separate function + ** should be used... + */ + * ((SK_U32 *)pMemBuf) = 0; + * ((SK_U32 *)pMemBuf + 1) = pdev->bus->number; + * ((SK_U32 *)pMemBuf + 2) = ParseDeviceNbrFromSlotName(pci_name(pdev)); + if(copy_to_user(Ioctl.pData, pMemBuf, Length) ) { + Err = -EFAULT; + goto fault_diag; + } + Ioctl.Len = Length; + if(copy_to_user(rq->ifr_data, &Ioctl, sizeof(SK_GE_IOCTL))) { + Err = -EFAULT; + goto fault_diag; + } +fault_diag: + kfree(pMemBuf); /* cleanup everything */ + break; +#endif + default: + Err = -EOPNOTSUPP; + } + + return(Err); + +} /* SkGeIoctl */ + + +/***************************************************************************** + * + * SkGeIocMib - handle a GetMib, SetMib- or PresetMib-ioctl message + * + * Description: + * This function reads/writes the MIB data using PNMI (Private Network + * Management Interface). + * The destination for the data must be provided with the + * ioctl call and is given to the driver in the form of + * a user space address. + * Copying from the user-provided data area into kernel messages + * and back is done by copy_from_user and copy_to_user calls in + * SkGeIoctl. + * + * Returns: + * returned size from PNMI call + */ +static int SkGeIocMib( +DEV_NET *pNet, /* pointer to the adapter context */ +unsigned int Size, /* length of ioctl data */ +int mode) /* flag for set/preset */ +{ +unsigned long Flags; /* for spin lock */ +SK_AC *pAC; + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("SkGeIocMib starts now...\n")); + pAC = pNet->pAC; + /* access MIB */ + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + switch(mode) { + case SK_IOCTL_GETMIB: + SkPnmiGetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size, + pNet->NetNr); + break; + case SK_IOCTL_PRESETMIB: + SkPnmiPreSetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size, + pNet->NetNr); + break; + case SK_IOCTL_SETMIB: + SkPnmiSetStruct(pAC, pAC->IoBase, &pAC->PnmiStruct, &Size, + pNet->NetNr); + break; + default: + break; + } + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, + ("MIB data access succeeded\n")); + return (Size); +} /* SkGeIocMib */ + + +/***************************************************************************** + * + * GetConfiguration - read configuration information + * + * Description: + * This function reads per-adapter configuration information from + * the options provided on the command line. + * + * Returns: + * none + */ +static void GetConfiguration( +SK_AC *pAC) /* pointer to the adapter context structure */ +{ +SK_I32 Port; /* preferred port */ +SK_BOOL AutoSet; +SK_BOOL DupSet; +int LinkSpeed = SK_LSPEED_AUTO; /* Link speed */ +int AutoNeg = 1; /* autoneg off (0) or on (1) */ +int DuplexCap = 0; /* 0=both,1=full,2=half */ +int FlowCtrl = SK_FLOW_MODE_SYM_OR_REM; /* FlowControl */ +int MSMode = SK_MS_MODE_AUTO; /* master/slave mode */ + +SK_BOOL IsConTypeDefined = SK_TRUE; +SK_BOOL IsLinkSpeedDefined = SK_TRUE; +SK_BOOL IsFlowCtrlDefined = SK_TRUE; +SK_BOOL IsRoleDefined = SK_TRUE; +SK_BOOL IsModeDefined = SK_TRUE; +/* + * The two parameters AutoNeg. and DuplexCap. map to one configuration + * parameter. The mapping is described by this table: + * DuplexCap -> | both | full | half | + * AutoNeg | | | | + * ----------------------------------------------------------------- + * Off | illegal | Full | Half | + * ----------------------------------------------------------------- + * On | AutoBoth | AutoFull | AutoHalf | + * ----------------------------------------------------------------- + * Sense | AutoSense | AutoSense | AutoSense | + */ +int Capabilities[3][3] = + { { -1, SK_LMODE_FULL , SK_LMODE_HALF }, + {SK_LMODE_AUTOBOTH , SK_LMODE_AUTOFULL , SK_LMODE_AUTOHALF }, + {SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE} }; + +#define DC_BOTH 0 +#define DC_FULL 1 +#define DC_HALF 2 +#define AN_OFF 0 +#define AN_ON 1 +#define AN_SENS 2 +#define M_CurrPort pAC->GIni.GP[Port] + + + /* + ** Set the default values first for both ports! + */ + for (Port = 0; Port < SK_MAX_MACS; Port++) { + M_CurrPort.PLinkModeConf = Capabilities[AN_ON][DC_BOTH]; + M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM; + M_CurrPort.PMSMode = SK_MS_MODE_AUTO; + M_CurrPort.PLinkSpeed = SK_LSPEED_AUTO; + } + + /* + ** Check merged parameter ConType. If it has not been used, + ** verify any other parameter (e.g. AutoNeg) and use default values. + ** + ** Stating both ConType and other lowlevel link parameters is also + ** possible. If this is the case, the passed ConType-parameter is + ** overwritten by the lowlevel link parameter. + ** + ** The following settings are used for a merged ConType-parameter: + ** + ** ConType DupCap AutoNeg FlowCtrl Role Speed + ** ------- ------ ------- -------- ---------- ----- + ** Auto Both On SymOrRem Auto Auto + ** 100FD Full Off None 100 + ** 100HD Half Off None 100 + ** 10FD Full Off None 10 + ** 10HD Half Off None 10 + ** + ** This ConType parameter is used for all ports of the adapter! + */ + if ( (ConType != NULL) && + (pAC->Index < SK_MAX_CARD_PARAM) && + (ConType[pAC->Index] != NULL) ) { + + /* Check chipset family */ + if ((!pAC->ChipsetType) && + (strcmp(ConType[pAC->Index],"Auto")!=0) && + (strcmp(ConType[pAC->Index],"")!=0)) { + /* Set the speed parameter back */ + printk("sk98lin: Illegal value \"%s\" " + "for ConType." + " Using Auto.\n", + ConType[pAC->Index]); + + sprintf(ConType[pAC->Index], "Auto"); + } + + if (strcmp(ConType[pAC->Index],"")==0) { + IsConTypeDefined = SK_FALSE; /* No ConType defined */ + } else if (strcmp(ConType[pAC->Index],"Auto")==0) { + for (Port = 0; Port < SK_MAX_MACS; Port++) { + M_CurrPort.PLinkModeConf = Capabilities[AN_ON][DC_BOTH]; + M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM; + M_CurrPort.PMSMode = SK_MS_MODE_AUTO; + M_CurrPort.PLinkSpeed = SK_LSPEED_AUTO; + } + } else if (strcmp(ConType[pAC->Index],"100FD")==0) { + for (Port = 0; Port < SK_MAX_MACS; Port++) { + M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_FULL]; + M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE; + M_CurrPort.PMSMode = SK_MS_MODE_AUTO; + M_CurrPort.PLinkSpeed = SK_LSPEED_100MBPS; + } + } else if (strcmp(ConType[pAC->Index],"100HD")==0) { + for (Port = 0; Port < SK_MAX_MACS; Port++) { + M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_HALF]; + M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE; + M_CurrPort.PMSMode = SK_MS_MODE_AUTO; + M_CurrPort.PLinkSpeed = SK_LSPEED_100MBPS; + } + } else if (strcmp(ConType[pAC->Index],"10FD")==0) { + for (Port = 0; Port < SK_MAX_MACS; Port++) { + M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_FULL]; + M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE; + M_CurrPort.PMSMode = SK_MS_MODE_AUTO; + M_CurrPort.PLinkSpeed = SK_LSPEED_10MBPS; + } + } else if (strcmp(ConType[pAC->Index],"10HD")==0) { + for (Port = 0; Port < SK_MAX_MACS; Port++) { + M_CurrPort.PLinkModeConf = Capabilities[AN_OFF][DC_HALF]; + M_CurrPort.PFlowCtrlMode = SK_FLOW_MODE_NONE; + M_CurrPort.PMSMode = SK_MS_MODE_AUTO; + M_CurrPort.PLinkSpeed = SK_LSPEED_10MBPS; + } + } else { + printk("sk98lin: Illegal value \"%s\" for ConType\n", + ConType[pAC->Index]); + IsConTypeDefined = SK_FALSE; /* Wrong ConType defined */ + } + } else { + IsConTypeDefined = SK_FALSE; /* No ConType defined */ + } + + /* + ** Parse any parameter settings for port A: + ** a) any LinkSpeed stated? + */ + if (Speed_A != NULL && pAC->IndexIndex] != NULL) { + if (strcmp(Speed_A[pAC->Index],"")==0) { + IsLinkSpeedDefined = SK_FALSE; + } else if (strcmp(Speed_A[pAC->Index],"Auto")==0) { + LinkSpeed = SK_LSPEED_AUTO; + } else if (strcmp(Speed_A[pAC->Index],"10")==0) { + LinkSpeed = SK_LSPEED_10MBPS; + } else if (strcmp(Speed_A[pAC->Index],"100")==0) { + LinkSpeed = SK_LSPEED_100MBPS; + } else if (strcmp(Speed_A[pAC->Index],"1000")==0) { + LinkSpeed = SK_LSPEED_1000MBPS; + } else { + printk("sk98lin: Illegal value \"%s\" for Speed_A\n", + Speed_A[pAC->Index]); + IsLinkSpeedDefined = SK_FALSE; + } + } else { + IsLinkSpeedDefined = SK_FALSE; + } + + /* + ** Check speed parameter: + ** Only copper type adapter and GE V2 cards + */ + if (((!pAC->ChipsetType) || (pAC->GIni.GICopperType != SK_TRUE)) && + ((LinkSpeed != SK_LSPEED_AUTO) && + (LinkSpeed != SK_LSPEED_1000MBPS))) { + printk("sk98lin: Illegal value for Speed_A. " + "Not a copper card or GE V2 card\n Using " + "speed 1000\n"); + LinkSpeed = SK_LSPEED_1000MBPS; + } + + /* + ** Decide whether to set new config value if somethig valid has + ** been received. + */ + if (IsLinkSpeedDefined) { + pAC->GIni.GP[0].PLinkSpeed = LinkSpeed; + } + + /* + ** b) Any Autonegotiation and DuplexCapabilities set? + ** Please note that both belong together... + */ + AutoNeg = AN_ON; /* tschilling: Default: Autonegotiation on! */ + AutoSet = SK_FALSE; + if (AutoNeg_A != NULL && pAC->IndexIndex] != NULL) { + AutoSet = SK_TRUE; + if (strcmp(AutoNeg_A[pAC->Index],"")==0) { + AutoSet = SK_FALSE; + } else if (strcmp(AutoNeg_A[pAC->Index],"On")==0) { + AutoNeg = AN_ON; + } else if (strcmp(AutoNeg_A[pAC->Index],"Off")==0) { + AutoNeg = AN_OFF; + } else if (strcmp(AutoNeg_A[pAC->Index],"Sense")==0) { + AutoNeg = AN_SENS; + } else { + printk("sk98lin: Illegal value \"%s\" for AutoNeg_A\n", + AutoNeg_A[pAC->Index]); + } + } + + DuplexCap = DC_BOTH; + DupSet = SK_FALSE; + if (DupCap_A != NULL && pAC->IndexIndex] != NULL) { + DupSet = SK_TRUE; + if (strcmp(DupCap_A[pAC->Index],"")==0) { + DupSet = SK_FALSE; + } else if (strcmp(DupCap_A[pAC->Index],"Both")==0) { + DuplexCap = DC_BOTH; + } else if (strcmp(DupCap_A[pAC->Index],"Full")==0) { + DuplexCap = DC_FULL; + } else if (strcmp(DupCap_A[pAC->Index],"Half")==0) { + DuplexCap = DC_HALF; + } else { + printk("sk98lin: Illegal value \"%s\" for DupCap_A\n", + DupCap_A[pAC->Index]); + } + } + + /* + ** Check for illegal combinations + */ + if ((LinkSpeed == SK_LSPEED_1000MBPS) && + ((DuplexCap == SK_LMODE_STAT_AUTOHALF) || + (DuplexCap == SK_LMODE_STAT_HALF)) && + (pAC->ChipsetType)) { + printk("sk98lin: Half Duplex not possible with Gigabit speed!\n" + " Using Full Duplex.\n"); + DuplexCap = DC_FULL; + } + + if ( AutoSet && AutoNeg==AN_SENS && DupSet) { + printk("sk98lin, Port A: DuplexCapabilities" + " ignored using Sense mode\n"); + } + + if (AutoSet && AutoNeg==AN_OFF && DupSet && DuplexCap==DC_BOTH){ + printk("sk98lin: Port A: Illegal combination" + " of values AutoNeg. and DuplexCap.\n Using " + "Full Duplex\n"); + DuplexCap = DC_FULL; + } + + if (AutoSet && AutoNeg==AN_OFF && !DupSet) { + DuplexCap = DC_FULL; + } + + if (!AutoSet && DupSet) { + printk("sk98lin: Port A: Duplex setting not" + " possible in\n default AutoNegotiation mode" + " (Sense).\n Using AutoNegotiation On\n"); + AutoNeg = AN_ON; + } + + /* + ** set the desired mode + */ + if (AutoSet || DupSet) { + pAC->GIni.GP[0].PLinkModeConf = Capabilities[AutoNeg][DuplexCap]; + } + + /* + ** c) Any Flowcontrol-parameter set? + */ + if (FlowCtrl_A != NULL && pAC->IndexIndex] != NULL) { + if (strcmp(FlowCtrl_A[pAC->Index],"") == 0) { + IsFlowCtrlDefined = SK_FALSE; + } else if (strcmp(FlowCtrl_A[pAC->Index],"SymOrRem") == 0) { + FlowCtrl = SK_FLOW_MODE_SYM_OR_REM; + } else if (strcmp(FlowCtrl_A[pAC->Index],"Sym")==0) { + FlowCtrl = SK_FLOW_MODE_SYMMETRIC; + } else if (strcmp(FlowCtrl_A[pAC->Index],"LocSend")==0) { + FlowCtrl = SK_FLOW_MODE_LOC_SEND; + } else if (strcmp(FlowCtrl_A[pAC->Index],"None")==0) { + FlowCtrl = SK_FLOW_MODE_NONE; + } else { + printk("sk98lin: Illegal value \"%s\" for FlowCtrl_A\n", + FlowCtrl_A[pAC->Index]); + IsFlowCtrlDefined = SK_FALSE; + } + } else { + IsFlowCtrlDefined = SK_FALSE; + } + + if (IsFlowCtrlDefined) { + if ((AutoNeg == AN_OFF) && (FlowCtrl != SK_FLOW_MODE_NONE)) { + printk("sk98lin: Port A: FlowControl" + " impossible without AutoNegotiation," + " disabled\n"); + FlowCtrl = SK_FLOW_MODE_NONE; + } + pAC->GIni.GP[0].PFlowCtrlMode = FlowCtrl; + } + + /* + ** d) What is with the RoleParameter? + */ + if (Role_A != NULL && pAC->IndexIndex] != NULL) { + if (strcmp(Role_A[pAC->Index],"")==0) { + IsRoleDefined = SK_FALSE; + } else if (strcmp(Role_A[pAC->Index],"Auto")==0) { + MSMode = SK_MS_MODE_AUTO; + } else if (strcmp(Role_A[pAC->Index],"Master")==0) { + MSMode = SK_MS_MODE_MASTER; + } else if (strcmp(Role_A[pAC->Index],"Slave")==0) { + MSMode = SK_MS_MODE_SLAVE; + } else { + printk("sk98lin: Illegal value \"%s\" for Role_A\n", + Role_A[pAC->Index]); + IsRoleDefined = SK_FALSE; + } + } else { + IsRoleDefined = SK_FALSE; + } + + if (IsRoleDefined == SK_TRUE) { + pAC->GIni.GP[0].PMSMode = MSMode; + } + + + + /* + ** Parse any parameter settings for port B: + ** a) any LinkSpeed stated? + */ + IsConTypeDefined = SK_TRUE; + IsLinkSpeedDefined = SK_TRUE; + IsFlowCtrlDefined = SK_TRUE; + IsModeDefined = SK_TRUE; + + if (Speed_B != NULL && pAC->IndexIndex] != NULL) { + if (strcmp(Speed_B[pAC->Index],"")==0) { + IsLinkSpeedDefined = SK_FALSE; + } else if (strcmp(Speed_B[pAC->Index],"Auto")==0) { + LinkSpeed = SK_LSPEED_AUTO; + } else if (strcmp(Speed_B[pAC->Index],"10")==0) { + LinkSpeed = SK_LSPEED_10MBPS; + } else if (strcmp(Speed_B[pAC->Index],"100")==0) { + LinkSpeed = SK_LSPEED_100MBPS; + } else if (strcmp(Speed_B[pAC->Index],"1000")==0) { + LinkSpeed = SK_LSPEED_1000MBPS; + } else { + printk("sk98lin: Illegal value \"%s\" for Speed_B\n", + Speed_B[pAC->Index]); + IsLinkSpeedDefined = SK_FALSE; + } + } else { + IsLinkSpeedDefined = SK_FALSE; + } + + /* + ** Check speed parameter: + ** Only copper type adapter and GE V2 cards + */ + if (((!pAC->ChipsetType) || (pAC->GIni.GICopperType != SK_TRUE)) && + ((LinkSpeed != SK_LSPEED_AUTO) && + (LinkSpeed != SK_LSPEED_1000MBPS))) { + printk("sk98lin: Illegal value for Speed_B. " + "Not a copper card or GE V2 card\n Using " + "speed 1000\n"); + LinkSpeed = SK_LSPEED_1000MBPS; + } + + /* + ** Decide whether to set new config value if somethig valid has + ** been received. + */ + if (IsLinkSpeedDefined) { + pAC->GIni.GP[1].PLinkSpeed = LinkSpeed; + } + + /* + ** b) Any Autonegotiation and DuplexCapabilities set? + ** Please note that both belong together... + */ + AutoNeg = AN_SENS; /* default: do auto Sense */ + AutoSet = SK_FALSE; + if (AutoNeg_B != NULL && pAC->IndexIndex] != NULL) { + AutoSet = SK_TRUE; + if (strcmp(AutoNeg_B[pAC->Index],"")==0) { + AutoSet = SK_FALSE; + } else if (strcmp(AutoNeg_B[pAC->Index],"On")==0) { + AutoNeg = AN_ON; + } else if (strcmp(AutoNeg_B[pAC->Index],"Off")==0) { + AutoNeg = AN_OFF; + } else if (strcmp(AutoNeg_B[pAC->Index],"Sense")==0) { + AutoNeg = AN_SENS; + } else { + printk("sk98lin: Illegal value \"%s\" for AutoNeg_B\n", + AutoNeg_B[pAC->Index]); + } + } + + DuplexCap = DC_BOTH; + DupSet = SK_FALSE; + if (DupCap_B != NULL && pAC->IndexIndex] != NULL) { + DupSet = SK_TRUE; + if (strcmp(DupCap_B[pAC->Index],"")==0) { + DupSet = SK_FALSE; + } else if (strcmp(DupCap_B[pAC->Index],"Both")==0) { + DuplexCap = DC_BOTH; + } else if (strcmp(DupCap_B[pAC->Index],"Full")==0) { + DuplexCap = DC_FULL; + } else if (strcmp(DupCap_B[pAC->Index],"Half")==0) { + DuplexCap = DC_HALF; + } else { + printk("sk98lin: Illegal value \"%s\" for DupCap_B\n", + DupCap_B[pAC->Index]); + } + } + + + /* + ** Check for illegal combinations + */ + if ((LinkSpeed == SK_LSPEED_1000MBPS) && + ((DuplexCap == SK_LMODE_STAT_AUTOHALF) || + (DuplexCap == SK_LMODE_STAT_HALF)) && + (pAC->ChipsetType)) { + printk("sk98lin: Half Duplex not possible with Gigabit speed!\n" + " Using Full Duplex.\n"); + DuplexCap = DC_FULL; + } + + if (AutoSet && AutoNeg==AN_SENS && DupSet) { + printk("sk98lin, Port B: DuplexCapabilities" + " ignored using Sense mode\n"); + } + + if (AutoSet && AutoNeg==AN_OFF && DupSet && DuplexCap==DC_BOTH){ + printk("sk98lin: Port B: Illegal combination" + " of values AutoNeg. and DuplexCap.\n Using " + "Full Duplex\n"); + DuplexCap = DC_FULL; + } + + if (AutoSet && AutoNeg==AN_OFF && !DupSet) { + DuplexCap = DC_FULL; + } + + if (!AutoSet && DupSet) { + printk("sk98lin: Port B: Duplex setting not" + " possible in\n default AutoNegotiation mode" + " (Sense).\n Using AutoNegotiation On\n"); + AutoNeg = AN_ON; + } + + /* + ** set the desired mode + */ + if (AutoSet || DupSet) { + pAC->GIni.GP[1].PLinkModeConf = Capabilities[AutoNeg][DuplexCap]; + } + + /* + ** c) Any FlowCtrl parameter set? + */ + if (FlowCtrl_B != NULL && pAC->IndexIndex] != NULL) { + if (strcmp(FlowCtrl_B[pAC->Index],"") == 0) { + IsFlowCtrlDefined = SK_FALSE; + } else if (strcmp(FlowCtrl_B[pAC->Index],"SymOrRem") == 0) { + FlowCtrl = SK_FLOW_MODE_SYM_OR_REM; + } else if (strcmp(FlowCtrl_B[pAC->Index],"Sym")==0) { + FlowCtrl = SK_FLOW_MODE_SYMMETRIC; + } else if (strcmp(FlowCtrl_B[pAC->Index],"LocSend")==0) { + FlowCtrl = SK_FLOW_MODE_LOC_SEND; + } else if (strcmp(FlowCtrl_B[pAC->Index],"None")==0) { + FlowCtrl = SK_FLOW_MODE_NONE; + } else { + printk("sk98lin: Illegal value \"%s\" for FlowCtrl_B\n", + FlowCtrl_B[pAC->Index]); + IsFlowCtrlDefined = SK_FALSE; + } + } else { + IsFlowCtrlDefined = SK_FALSE; + } + + if (IsFlowCtrlDefined) { + if ((AutoNeg == AN_OFF) && (FlowCtrl != SK_FLOW_MODE_NONE)) { + printk("sk98lin: Port B: FlowControl" + " impossible without AutoNegotiation," + " disabled\n"); + FlowCtrl = SK_FLOW_MODE_NONE; + } + pAC->GIni.GP[1].PFlowCtrlMode = FlowCtrl; + } + + /* + ** d) What is the RoleParameter? + */ + if (Role_B != NULL && pAC->IndexIndex] != NULL) { + if (strcmp(Role_B[pAC->Index],"")==0) { + IsRoleDefined = SK_FALSE; + } else if (strcmp(Role_B[pAC->Index],"Auto")==0) { + MSMode = SK_MS_MODE_AUTO; + } else if (strcmp(Role_B[pAC->Index],"Master")==0) { + MSMode = SK_MS_MODE_MASTER; + } else if (strcmp(Role_B[pAC->Index],"Slave")==0) { + MSMode = SK_MS_MODE_SLAVE; + } else { + printk("sk98lin: Illegal value \"%s\" for Role_B\n", + Role_B[pAC->Index]); + IsRoleDefined = SK_FALSE; + } + } else { + IsRoleDefined = SK_FALSE; + } + + if (IsRoleDefined) { + pAC->GIni.GP[1].PMSMode = MSMode; + } + + /* + ** Evaluate settings for both ports + */ + pAC->ActivePort = 0; + if (PrefPort != NULL && pAC->IndexIndex] != NULL) { + if (strcmp(PrefPort[pAC->Index],"") == 0) { /* Auto */ + pAC->ActivePort = 0; + pAC->Rlmt.Net[0].Preference = -1; /* auto */ + pAC->Rlmt.Net[0].PrefPort = 0; + } else if (strcmp(PrefPort[pAC->Index],"A") == 0) { + /* + ** do not set ActivePort here, thus a port + ** switch is issued after net up. + */ + Port = 0; + pAC->Rlmt.Net[0].Preference = Port; + pAC->Rlmt.Net[0].PrefPort = Port; + } else if (strcmp(PrefPort[pAC->Index],"B") == 0) { + /* + ** do not set ActivePort here, thus a port + ** switch is issued after net up. + */ + if (pAC->GIni.GIMacsFound == 1) { + printk("sk98lin: Illegal value \"B\" for PrefPort.\n" + " Port B not available on single port adapters.\n"); + + pAC->ActivePort = 0; + pAC->Rlmt.Net[0].Preference = -1; /* auto */ + pAC->Rlmt.Net[0].PrefPort = 0; + } else { + Port = 1; + pAC->Rlmt.Net[0].Preference = Port; + pAC->Rlmt.Net[0].PrefPort = Port; + } + } else { + printk("sk98lin: Illegal value \"%s\" for PrefPort\n", + PrefPort[pAC->Index]); + } + } + + pAC->RlmtNets = 1; + + if (RlmtMode != NULL && pAC->IndexIndex] != NULL) { + if (strcmp(RlmtMode[pAC->Index], "") == 0) { + pAC->RlmtMode = 0; + } else if (strcmp(RlmtMode[pAC->Index], "CheckLinkState") == 0) { + pAC->RlmtMode = SK_RLMT_CHECK_LINK; + } else if (strcmp(RlmtMode[pAC->Index], "CheckLocalPort") == 0) { + pAC->RlmtMode = SK_RLMT_CHECK_LINK | + SK_RLMT_CHECK_LOC_LINK; + } else if (strcmp(RlmtMode[pAC->Index], "CheckSeg") == 0) { + pAC->RlmtMode = SK_RLMT_CHECK_LINK | + SK_RLMT_CHECK_LOC_LINK | + SK_RLMT_CHECK_SEG; + } else if ((strcmp(RlmtMode[pAC->Index], "DualNet") == 0) && + (pAC->GIni.GIMacsFound == 2)) { + pAC->RlmtMode = SK_RLMT_CHECK_LINK; + pAC->RlmtNets = 2; + } else { + printk("sk98lin: Illegal value \"%s\" for" + " RlmtMode, using default\n", + RlmtMode[pAC->Index]); + pAC->RlmtMode = 0; + } + } else { + pAC->RlmtMode = 0; + } + + /* + ** Check the interrupt moderation parameters + */ + if (Moderation[pAC->Index] != NULL) { + if (strcmp(Moderation[pAC->Index], "") == 0) { + pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE; + } else if (strcmp(Moderation[pAC->Index], "Static") == 0) { + pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_STATIC; + } else if (strcmp(Moderation[pAC->Index], "Dynamic") == 0) { + pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_DYNAMIC; + } else if (strcmp(Moderation[pAC->Index], "None") == 0) { + pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE; + } else { + printk("sk98lin: Illegal value \"%s\" for Moderation.\n" + " Disable interrupt moderation.\n", + Moderation[pAC->Index]); + pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE; + } + } else { + pAC->DynIrqModInfo.IntModTypeSelect = C_INT_MOD_NONE; + } + + if (Stats[pAC->Index] != NULL) { + if (strcmp(Stats[pAC->Index], "Yes") == 0) { + pAC->DynIrqModInfo.DisplayStats = SK_TRUE; + } else { + pAC->DynIrqModInfo.DisplayStats = SK_FALSE; + } + } else { + pAC->DynIrqModInfo.DisplayStats = SK_FALSE; + } + + if (ModerationMask[pAC->Index] != NULL) { + if (strcmp(ModerationMask[pAC->Index], "Rx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_ONLY; + } else if (strcmp(ModerationMask[pAC->Index], "Tx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_ONLY; + } else if (strcmp(ModerationMask[pAC->Index], "Sp") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_ONLY; + } else if (strcmp(ModerationMask[pAC->Index], "RxSp") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_RX; + } else if (strcmp(ModerationMask[pAC->Index], "SpRx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_RX; + } else if (strcmp(ModerationMask[pAC->Index], "RxTx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_RX; + } else if (strcmp(ModerationMask[pAC->Index], "TxRx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_RX; + } else if (strcmp(ModerationMask[pAC->Index], "TxSp") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_TX; + } else if (strcmp(ModerationMask[pAC->Index], "SpTx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_SP_TX; + } else if (strcmp(ModerationMask[pAC->Index], "RxTxSp") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; + } else if (strcmp(ModerationMask[pAC->Index], "RxSpTx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; + } else if (strcmp(ModerationMask[pAC->Index], "TxRxSp") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; + } else if (strcmp(ModerationMask[pAC->Index], "TxSpRx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; + } else if (strcmp(ModerationMask[pAC->Index], "SpTxRx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; + } else if (strcmp(ModerationMask[pAC->Index], "SpRxTx") == 0) { + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_TX_SP; + } else { /* some rubbish */ + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_RX_ONLY; + } + } else { /* operator has stated nothing */ + pAC->DynIrqModInfo.MaskIrqModeration = IRQ_MASK_TX_RX; + } + + if (AutoSizing[pAC->Index] != NULL) { + if (strcmp(AutoSizing[pAC->Index], "On") == 0) { + pAC->DynIrqModInfo.AutoSizing = SK_FALSE; + } else { + pAC->DynIrqModInfo.AutoSizing = SK_FALSE; + } + } else { /* operator has stated nothing */ + pAC->DynIrqModInfo.AutoSizing = SK_FALSE; + } + + if (IntsPerSec[pAC->Index] != 0) { + if ((IntsPerSec[pAC->Index]< C_INT_MOD_IPS_LOWER_RANGE) || + (IntsPerSec[pAC->Index] > C_INT_MOD_IPS_UPPER_RANGE)) { + printk("sk98lin: Illegal value \"%d\" for IntsPerSec. (Range: %d - %d)\n" + " Using default value of %i.\n", + IntsPerSec[pAC->Index], + C_INT_MOD_IPS_LOWER_RANGE, + C_INT_MOD_IPS_UPPER_RANGE, + C_INTS_PER_SEC_DEFAULT); + pAC->DynIrqModInfo.MaxModIntsPerSec = C_INTS_PER_SEC_DEFAULT; + } else { + pAC->DynIrqModInfo.MaxModIntsPerSec = IntsPerSec[pAC->Index]; + } + } else { + pAC->DynIrqModInfo.MaxModIntsPerSec = C_INTS_PER_SEC_DEFAULT; + } + + /* + ** Evaluate upper and lower moderation threshold + */ + pAC->DynIrqModInfo.MaxModIntsPerSecUpperLimit = + pAC->DynIrqModInfo.MaxModIntsPerSec + + (pAC->DynIrqModInfo.MaxModIntsPerSec / 2); + + pAC->DynIrqModInfo.MaxModIntsPerSecLowerLimit = + pAC->DynIrqModInfo.MaxModIntsPerSec - + (pAC->DynIrqModInfo.MaxModIntsPerSec / 2); + + pAC->DynIrqModInfo.PrevTimeVal = jiffies; /* initial value */ + + +} /* GetConfiguration */ + + +/***************************************************************************** + * + * ProductStr - return a adapter identification string from vpd + * + * Description: + * This function reads the product name string from the vpd area + * and puts it the field pAC->DeviceString. + * + * Returns: N/A + */ +static inline int ProductStr( + SK_AC *pAC, /* pointer to adapter context */ + char *DeviceStr, /* result string */ + int StrLen /* length of the string */ +) +{ +char Keyword[] = VPD_NAME; /* vpd productname identifier */ +int ReturnCode; /* return code from vpd_read */ +unsigned long Flags; + + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, DeviceStr, &StrLen); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + + return ReturnCode; +} /* ProductStr */ + +/***************************************************************************** + * + * StartDrvCleanupTimer - Start timer to check for descriptors which + * might be placed in descriptor ring, but + * havent been handled up to now + * + * Description: + * This function requests a HW-timer fo the Yukon card. The actions to + * perform when this timer expires, are located in the SkDrvEvent(). + * + * Returns: N/A + */ +static void +StartDrvCleanupTimer(SK_AC *pAC) { + SK_EVPARA EventParam; /* Event struct for timer event */ + + SK_MEMSET((char *) &EventParam, 0, sizeof(EventParam)); + EventParam.Para32[0] = SK_DRV_RX_CLEANUP_TIMER; + SkTimerStart(pAC, pAC->IoBase, &pAC->DrvCleanupTimer, + SK_DRV_RX_CLEANUP_TIMER_LENGTH, + SKGE_DRV, SK_DRV_TIMER, EventParam); +} + +/***************************************************************************** + * + * StopDrvCleanupTimer - Stop timer to check for descriptors + * + * Description: + * This function requests a HW-timer fo the Yukon card. The actions to + * perform when this timer expires, are located in the SkDrvEvent(). + * + * Returns: N/A + */ +static void +StopDrvCleanupTimer(SK_AC *pAC) { + SkTimerStop(pAC, pAC->IoBase, &pAC->DrvCleanupTimer); + SK_MEMSET((char *) &pAC->DrvCleanupTimer, 0, sizeof(SK_TIMER)); +} + +/****************************************************************************/ +/* functions for common modules *********************************************/ +/****************************************************************************/ + + +/***************************************************************************** + * + * SkDrvAllocRlmtMbuf - allocate an RLMT mbuf + * + * Description: + * This routine returns an RLMT mbuf or NULL. The RLMT Mbuf structure + * is embedded into a socket buff data area. + * + * Context: + * runtime + * + * Returns: + * NULL or pointer to Mbuf. + */ +SK_MBUF *SkDrvAllocRlmtMbuf( +SK_AC *pAC, /* pointer to adapter context */ +SK_IOC IoC, /* the IO-context */ +unsigned BufferSize) /* size of the requested buffer */ +{ +SK_MBUF *pRlmtMbuf; /* pointer to a new rlmt-mbuf structure */ +struct sk_buff *pMsgBlock; /* pointer to a new message block */ + + pMsgBlock = alloc_skb(BufferSize + sizeof(SK_MBUF), GFP_ATOMIC); + if (pMsgBlock == NULL) { + return (NULL); + } + pRlmtMbuf = (SK_MBUF*) pMsgBlock->data; + skb_reserve(pMsgBlock, sizeof(SK_MBUF)); + pRlmtMbuf->pNext = NULL; + pRlmtMbuf->pOs = pMsgBlock; + pRlmtMbuf->pData = pMsgBlock->data; /* Data buffer. */ + pRlmtMbuf->Size = BufferSize; /* Data buffer size. */ + pRlmtMbuf->Length = 0; /* Length of packet (<= Size). */ + return (pRlmtMbuf); + +} /* SkDrvAllocRlmtMbuf */ + + +/***************************************************************************** + * + * SkDrvFreeRlmtMbuf - free an RLMT mbuf + * + * Description: + * This routine frees one or more RLMT mbuf(s). + * + * Context: + * runtime + * + * Returns: + * Nothing + */ +void SkDrvFreeRlmtMbuf( +SK_AC *pAC, /* pointer to adapter context */ +SK_IOC IoC, /* the IO-context */ +SK_MBUF *pMbuf) /* size of the requested buffer */ +{ +SK_MBUF *pFreeMbuf; +SK_MBUF *pNextMbuf; + + pFreeMbuf = pMbuf; + do { + pNextMbuf = pFreeMbuf->pNext; + DEV_KFREE_SKB_ANY(pFreeMbuf->pOs); + pFreeMbuf = pNextMbuf; + } while ( pFreeMbuf != NULL ); +} /* SkDrvFreeRlmtMbuf */ + + +/***************************************************************************** + * + * SkOsGetTime - provide a time value + * + * Description: + * This routine provides a time value. The unit is 1/HZ (defined by Linux). + * It is not used for absolute time, but only for time differences. + * + * + * Returns: + * Time value + */ +SK_U64 SkOsGetTime(SK_AC *pAC) +{ + SK_U64 PrivateJiffies; + SkOsGetTimeCurrent(pAC, &PrivateJiffies); + return PrivateJiffies; +} /* SkOsGetTime */ + + +/***************************************************************************** + * + * SkPciReadCfgDWord - read a 32 bit value from pci config space + * + * Description: + * This routine reads a 32 bit value from the pci configuration + * space. + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +int SkPciReadCfgDWord( +SK_AC *pAC, /* Adapter Control structure pointer */ +int PciAddr, /* PCI register address */ +SK_U32 *pVal) /* pointer to store the read value */ +{ + pci_read_config_dword(pAC->PciDev, PciAddr, pVal); + return(0); +} /* SkPciReadCfgDWord */ + + +/***************************************************************************** + * + * SkPciReadCfgWord - read a 16 bit value from pci config space + * + * Description: + * This routine reads a 16 bit value from the pci configuration + * space. + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +int SkPciReadCfgWord( +SK_AC *pAC, /* Adapter Control structure pointer */ +int PciAddr, /* PCI register address */ +SK_U16 *pVal) /* pointer to store the read value */ +{ + pci_read_config_word(pAC->PciDev, PciAddr, pVal); + return(0); +} /* SkPciReadCfgWord */ + + +/***************************************************************************** + * + * SkPciReadCfgByte - read a 8 bit value from pci config space + * + * Description: + * This routine reads a 8 bit value from the pci configuration + * space. + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +int SkPciReadCfgByte( +SK_AC *pAC, /* Adapter Control structure pointer */ +int PciAddr, /* PCI register address */ +SK_U8 *pVal) /* pointer to store the read value */ +{ + pci_read_config_byte(pAC->PciDev, PciAddr, pVal); + return(0); +} /* SkPciReadCfgByte */ + + +/***************************************************************************** + * + * SkPciWriteCfgWord - write a 16 bit value to pci config space + * + * Description: + * This routine writes a 16 bit value to the pci configuration + * space. The flag PciConfigUp indicates whether the config space + * is accesible or must be set up first. + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +int SkPciWriteCfgWord( +SK_AC *pAC, /* Adapter Control structure pointer */ +int PciAddr, /* PCI register address */ +SK_U16 Val) /* pointer to store the read value */ +{ + pci_write_config_word(pAC->PciDev, PciAddr, Val); + return(0); +} /* SkPciWriteCfgWord */ + + +/***************************************************************************** + * + * SkPciWriteCfgWord - write a 8 bit value to pci config space + * + * Description: + * This routine writes a 8 bit value to the pci configuration + * space. The flag PciConfigUp indicates whether the config space + * is accesible or must be set up first. + * + * Returns: + * 0 - indicate everything worked ok. + * != 0 - error indication + */ +int SkPciWriteCfgByte( +SK_AC *pAC, /* Adapter Control structure pointer */ +int PciAddr, /* PCI register address */ +SK_U8 Val) /* pointer to store the read value */ +{ + pci_write_config_byte(pAC->PciDev, PciAddr, Val); + return(0); +} /* SkPciWriteCfgByte */ + + +/***************************************************************************** + * + * SkDrvEvent - handle driver events + * + * Description: + * This function handles events from all modules directed to the driver + * + * Context: + * Is called under protection of slow path lock. + * + * Returns: + * 0 if everything ok + * < 0 on error + * + */ +int SkDrvEvent( +SK_AC *pAC, /* pointer to adapter context */ +SK_IOC IoC, /* io-context */ +SK_U32 Event, /* event-id */ +SK_EVPARA Param) /* event-parameter */ +{ +SK_MBUF *pRlmtMbuf; /* pointer to a rlmt-mbuf structure */ +struct sk_buff *pMsg; /* pointer to a message block */ +int FromPort; /* the port from which we switch away */ +int ToPort; /* the port we switch to */ +SK_EVPARA NewPara; /* parameter for further events */ +int Stat; +unsigned long Flags; +SK_BOOL DualNet; + + switch (Event) { + case SK_DRV_ADAP_FAIL: + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("ADAPTER FAIL EVENT\n")); + printk("%s: Adapter failed.\n", pAC->dev[0]->name); + /* disable interrupts */ + SK_OUT32(pAC->IoBase, B0_IMSK, 0); + /* cgoos */ + break; + case SK_DRV_PORT_FAIL: + FromPort = Param.Para32[0]; + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("PORT FAIL EVENT, Port: %d\n", FromPort)); + if (FromPort == 0) { + printk("%s: Port A failed.\n", pAC->dev[0]->name); + } else { + printk("%s: Port B failed.\n", pAC->dev[1]->name); + } + /* cgoos */ + break; + case SK_DRV_PORT_RESET: /* SK_U32 PortIdx */ + /* action list 4 */ + FromPort = Param.Para32[0]; + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("PORT RESET EVENT, Port: %d ", FromPort)); + NewPara.Para64 = FromPort; + SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara); + spin_lock_irqsave( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + + SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_HARD_RST); + netif_carrier_off(pAC->dev[Param.Para32[0]]); + spin_unlock_irqrestore( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + + /* clear rx ring from received frames */ + ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE); + + ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]); + spin_lock_irqsave( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + + /* tschilling: Handling of return value inserted. */ + if (SkGeInitPort(pAC, IoC, FromPort)) { + if (FromPort == 0) { + printk("%s: SkGeInitPort A failed.\n", pAC->dev[0]->name); + } else { + printk("%s: SkGeInitPort B failed.\n", pAC->dev[1]->name); + } + } + SkAddrMcUpdate(pAC,IoC, FromPort); + PortReInitBmu(pAC, FromPort); + SkGePollTxD(pAC, IoC, FromPort, SK_TRUE); + ClearAndStartRx(pAC, FromPort); + spin_unlock_irqrestore( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + break; + case SK_DRV_NET_UP: /* SK_U32 PortIdx */ + { struct net_device *dev = pAC->dev[Param.Para32[0]]; + /* action list 5 */ + FromPort = Param.Para32[0]; + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("NET UP EVENT, Port: %d ", Param.Para32[0])); + /* Mac update */ + SkAddrMcUpdate(pAC,IoC, FromPort); + + if (DoPrintInterfaceChange) { + printk("%s: network connection up using" + " port %c\n", pAC->dev[Param.Para32[0]]->name, 'A'+Param.Para32[0]); + + /* tschilling: Values changed according to LinkSpeedUsed. */ + Stat = pAC->GIni.GP[FromPort].PLinkSpeedUsed; + if (Stat == SK_LSPEED_STAT_10MBPS) { + printk(" speed: 10\n"); + } else if (Stat == SK_LSPEED_STAT_100MBPS) { + printk(" speed: 100\n"); + } else if (Stat == SK_LSPEED_STAT_1000MBPS) { + printk(" speed: 1000\n"); + } else { + printk(" speed: unknown\n"); + } + + + Stat = pAC->GIni.GP[FromPort].PLinkModeStatus; + if (Stat == SK_LMODE_STAT_AUTOHALF || + Stat == SK_LMODE_STAT_AUTOFULL) { + printk(" autonegotiation: yes\n"); + } + else { + printk(" autonegotiation: no\n"); + } + if (Stat == SK_LMODE_STAT_AUTOHALF || + Stat == SK_LMODE_STAT_HALF) { + printk(" duplex mode: half\n"); + } + else { + printk(" duplex mode: full\n"); + } + Stat = pAC->GIni.GP[FromPort].PFlowCtrlStatus; + if (Stat == SK_FLOW_STAT_REM_SEND ) { + printk(" flowctrl: remote send\n"); + } + else if (Stat == SK_FLOW_STAT_LOC_SEND ){ + printk(" flowctrl: local send\n"); + } + else if (Stat == SK_FLOW_STAT_SYMMETRIC ){ + printk(" flowctrl: symmetric\n"); + } + else { + printk(" flowctrl: none\n"); + } + + /* tschilling: Check against CopperType now. */ + if ((pAC->GIni.GICopperType == SK_TRUE) && + (pAC->GIni.GP[FromPort].PLinkSpeedUsed == + SK_LSPEED_STAT_1000MBPS)) { + Stat = pAC->GIni.GP[FromPort].PMSStatus; + if (Stat == SK_MS_STAT_MASTER ) { + printk(" role: master\n"); + } + else if (Stat == SK_MS_STAT_SLAVE ) { + printk(" role: slave\n"); + } + else { + printk(" role: ???\n"); + } + } + + /* + Display dim (dynamic interrupt moderation) + informations + */ + if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_STATIC) + printk(" irq moderation: static (%d ints/sec)\n", + pAC->DynIrqModInfo.MaxModIntsPerSec); + else if (pAC->DynIrqModInfo.IntModTypeSelect == C_INT_MOD_DYNAMIC) + printk(" irq moderation: dynamic (%d ints/sec)\n", + pAC->DynIrqModInfo.MaxModIntsPerSec); + else + printk(" irq moderation: disabled\n"); + + + printk(" scatter-gather: %s\n", + (dev->features & NETIF_F_SG) ? "enabled" : "disabled"); + printk(" tx-checksum: %s\n", + (dev->features & NETIF_F_IP_CSUM) ? "enabled" : "disabled"); + printk(" rx-checksum: %s\n", + pAC->RxPort[Param.Para32[0]].RxCsum ? "enabled" : "disabled"); + + } else { + DoPrintInterfaceChange = SK_TRUE; + } + + if ((Param.Para32[0] != pAC->ActivePort) && + (pAC->RlmtNets == 1)) { + NewPara.Para32[0] = pAC->ActivePort; + NewPara.Para32[1] = Param.Para32[0]; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_INTERN, + NewPara); + } + + /* Inform the world that link protocol is up. */ + netif_carrier_on(dev); + break; + } + case SK_DRV_NET_DOWN: /* SK_U32 Reason */ + /* action list 7 */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("NET DOWN EVENT ")); + if (DoPrintInterfaceChange) { + printk("%s: network connection down\n", + pAC->dev[Param.Para32[1]]->name); + } else { + DoPrintInterfaceChange = SK_TRUE; + } + netif_carrier_off(pAC->dev[Param.Para32[1]]); + break; + case SK_DRV_SWITCH_HARD: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("PORT SWITCH HARD ")); + case SK_DRV_SWITCH_SOFT: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */ + /* action list 6 */ + printk("%s: switching to port %c\n", pAC->dev[0]->name, + 'A'+Param.Para32[1]); + case SK_DRV_SWITCH_INTERN: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */ + FromPort = Param.Para32[0]; + ToPort = Param.Para32[1]; + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("PORT SWITCH EVENT, From: %d To: %d (Pref %d) ", + FromPort, ToPort, pAC->Rlmt.Net[0].PrefPort)); + NewPara.Para64 = FromPort; + SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara); + NewPara.Para64 = ToPort; + SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_XMAC_RESET, NewPara); + spin_lock_irqsave( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + spin_lock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock); + SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_SOFT_RST); + SkGeStopPort(pAC, IoC, ToPort, SK_STOP_ALL, SK_SOFT_RST); + spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock); + spin_unlock_irqrestore( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + + ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE); /* clears rx ring */ + ReceiveIrq(pAC, &pAC->RxPort[ToPort], SK_FALSE); /* clears rx ring */ + + ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]); + ClearTxRing(pAC, &pAC->TxPort[ToPort][TX_PRIO_LOW]); + spin_lock_irqsave( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + spin_lock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock); + pAC->ActivePort = ToPort; +#if 0 + SetQueueSizes(pAC); +#else + /* tschilling: New common function with minimum size check. */ + DualNet = SK_FALSE; + if (pAC->RlmtNets == 2) { + DualNet = SK_TRUE; + } + + if (SkGeInitAssignRamToQueues( + pAC, + pAC->ActivePort, + DualNet)) { + spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock); + spin_unlock_irqrestore( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + printk("SkGeInitAssignRamToQueues failed.\n"); + break; + } +#endif + /* tschilling: Handling of return values inserted. */ + if (SkGeInitPort(pAC, IoC, FromPort) || + SkGeInitPort(pAC, IoC, ToPort)) { + printk("%s: SkGeInitPort failed.\n", pAC->dev[0]->name); + } + if (Event == SK_DRV_SWITCH_SOFT) { + SkMacRxTxEnable(pAC, IoC, FromPort); + } + SkMacRxTxEnable(pAC, IoC, ToPort); + SkAddrSwap(pAC, IoC, FromPort, ToPort); + SkAddrMcUpdate(pAC, IoC, FromPort); + SkAddrMcUpdate(pAC, IoC, ToPort); + PortReInitBmu(pAC, FromPort); + PortReInitBmu(pAC, ToPort); + SkGePollTxD(pAC, IoC, FromPort, SK_TRUE); + SkGePollTxD(pAC, IoC, ToPort, SK_TRUE); + ClearAndStartRx(pAC, FromPort); + ClearAndStartRx(pAC, ToPort); + spin_unlock(&pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock); + spin_unlock_irqrestore( + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + Flags); + break; + case SK_DRV_RLMT_SEND: /* SK_MBUF *pMb */ + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("RLS ")); + pRlmtMbuf = (SK_MBUF*) Param.pParaPtr; + pMsg = (struct sk_buff*) pRlmtMbuf->pOs; + skb_put(pMsg, pRlmtMbuf->Length); + if (XmitFrame(pAC, &pAC->TxPort[pRlmtMbuf->PortIdx][TX_PRIO_LOW], + pMsg) < 0) + + DEV_KFREE_SKB_ANY(pMsg); + break; + case SK_DRV_TIMER: + if (Param.Para32[0] == SK_DRV_MODERATION_TIMER) { + /* + ** expiration of the moderation timer implies that + ** dynamic moderation is to be applied + */ + SkDimStartModerationTimer(pAC); + SkDimModerate(pAC); + if (pAC->DynIrqModInfo.DisplayStats) { + SkDimDisplayModerationSettings(pAC); + } + } else if (Param.Para32[0] == SK_DRV_RX_CLEANUP_TIMER) { + /* + ** check if we need to check for descriptors which + ** haven't been handled the last millisecs + */ + StartDrvCleanupTimer(pAC); + if (pAC->GIni.GIMacsFound == 2) { + ReceiveIrq(pAC, &pAC->RxPort[1], SK_FALSE); + } + ReceiveIrq(pAC, &pAC->RxPort[0], SK_FALSE); + } else { + printk("Expiration of unknown timer\n"); + } + break; + default: + break; + } + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, + ("END EVENT ")); + + return (0); +} /* SkDrvEvent */ + + +/***************************************************************************** + * + * SkErrorLog - log errors + * + * Description: + * This function logs errors to the system buffer and to the console + * + * Returns: + * 0 if everything ok + * < 0 on error + * + */ +void SkErrorLog( +SK_AC *pAC, +int ErrClass, +int ErrNum, +char *pErrorMsg) +{ +char ClassStr[80]; + + switch (ErrClass) { + case SK_ERRCL_OTHER: + strcpy(ClassStr, "Other error"); + break; + case SK_ERRCL_CONFIG: + strcpy(ClassStr, "Configuration error"); + break; + case SK_ERRCL_INIT: + strcpy(ClassStr, "Initialization error"); + break; + case SK_ERRCL_NORES: + strcpy(ClassStr, "Out of resources error"); + break; + case SK_ERRCL_SW: + strcpy(ClassStr, "internal Software error"); + break; + case SK_ERRCL_HW: + strcpy(ClassStr, "Hardware failure"); + break; + case SK_ERRCL_COMM: + strcpy(ClassStr, "Communication error"); + break; + } + printk(KERN_INFO "%s: -- ERROR --\n Class: %s\n" + " Nr: 0x%x\n Msg: %s\n", pAC->dev[0]->name, + ClassStr, ErrNum, pErrorMsg); + +} /* SkErrorLog */ + +#ifdef SK_DIAG_SUPPORT + +/***************************************************************************** + * + * SkDrvEnterDiagMode - handles DIAG attach request + * + * Description: + * Notify the kernel to NOT access the card any longer due to DIAG + * Deinitialize the Card + * + * Returns: + * int + */ +int SkDrvEnterDiagMode( +SK_AC *pAc) /* pointer to adapter context */ +{ + DEV_NET *pNet = netdev_priv(pAc->dev[0]); + SK_AC *pAC = pNet->pAC; + + SK_MEMCPY(&(pAc->PnmiBackup), &(pAc->PnmiStruct), + sizeof(SK_PNMI_STRUCT_DATA)); + + pAC->DiagModeActive = DIAG_ACTIVE; + if (pAC->BoardLevel > SK_INIT_DATA) { + if (netif_running(pAC->dev[0])) { + pAC->WasIfUp[0] = SK_TRUE; + pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ + DoPrintInterfaceChange = SK_FALSE; + SkDrvDeInitAdapter(pAC, 0); /* performs SkGeClose */ + } else { + pAC->WasIfUp[0] = SK_FALSE; + } + if (pNet != netdev_priv(pAC->dev[1])) { + pNet = netdev_priv(pAC->dev[1]); + if (netif_running(pAC->dev[1])) { + pAC->WasIfUp[1] = SK_TRUE; + pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ + DoPrintInterfaceChange = SK_FALSE; + SkDrvDeInitAdapter(pAC, 1); /* do SkGeClose */ + } else { + pAC->WasIfUp[1] = SK_FALSE; + } + } + pAC->BoardLevel = SK_INIT_DATA; + } + return(0); +} + +/***************************************************************************** + * + * SkDrvLeaveDiagMode - handles DIAG detach request + * + * Description: + * Notify the kernel to may access the card again after use by DIAG + * Initialize the Card + * + * Returns: + * int + */ +int SkDrvLeaveDiagMode( +SK_AC *pAc) /* pointer to adapter control context */ +{ + SK_MEMCPY(&(pAc->PnmiStruct), &(pAc->PnmiBackup), + sizeof(SK_PNMI_STRUCT_DATA)); + pAc->DiagModeActive = DIAG_NOTACTIVE; + pAc->Pnmi.DiagAttached = SK_DIAG_IDLE; + if (pAc->WasIfUp[0] == SK_TRUE) { + pAc->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ + DoPrintInterfaceChange = SK_FALSE; + SkDrvInitAdapter(pAc, 0); /* first device */ + } + if (pAc->WasIfUp[1] == SK_TRUE) { + pAc->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */ + DoPrintInterfaceChange = SK_FALSE; + SkDrvInitAdapter(pAc, 1); /* second device */ + } + return(0); +} + +/***************************************************************************** + * + * ParseDeviceNbrFromSlotName - Evaluate PCI device number + * + * Description: + * This function parses the PCI slot name information string and will + * retrieve the devcie number out of it. The slot_name maintianed by + * linux is in the form of '02:0a.0', whereas the first two characters + * represent the bus number in hex (in the sample above this is + * pci bus 0x02) and the next two characters the device number (0x0a). + * + * Returns: + * SK_U32: The device number from the PCI slot name + */ + +static SK_U32 ParseDeviceNbrFromSlotName( +const char *SlotName) /* pointer to pci slot name eg. '02:0a.0' */ +{ + char *CurrCharPos = (char *) SlotName; + int FirstNibble = -1; + int SecondNibble = -1; + SK_U32 Result = 0; + + while (*CurrCharPos != '\0') { + if (*CurrCharPos == ':') { + while (*CurrCharPos != '.') { + CurrCharPos++; + if ( (*CurrCharPos >= '0') && + (*CurrCharPos <= '9')) { + if (FirstNibble == -1) { + /* dec. value for '0' */ + FirstNibble = *CurrCharPos - 48; + } else { + SecondNibble = *CurrCharPos - 48; + } + } else if ( (*CurrCharPos >= 'a') && + (*CurrCharPos <= 'f') ) { + if (FirstNibble == -1) { + FirstNibble = *CurrCharPos - 87; + } else { + SecondNibble = *CurrCharPos - 87; + } + } else { + Result = 0; + } + } + + Result = FirstNibble; + Result = Result << 4; /* first nibble is higher one */ + Result = Result | SecondNibble; + } + CurrCharPos++; /* next character */ + } + return (Result); +} + +/**************************************************************************** + * + * SkDrvDeInitAdapter - deinitialize adapter (this function is only + * called if Diag attaches to that card) + * + * Description: + * Close initialized adapter. + * + * Returns: + * 0 - on success + * error code - on error + */ +static int SkDrvDeInitAdapter( +SK_AC *pAC, /* pointer to adapter context */ +int devNbr) /* what device is to be handled */ +{ + struct SK_NET_DEVICE *dev; + + dev = pAC->dev[devNbr]; + + /* On Linux 2.6 the network driver does NOT mess with reference + ** counts. The driver MUST be able to be unloaded at any time + ** due to the possibility of hotplug. + */ + if (SkGeClose(dev) != 0) { + return (-1); + } + return (0); + +} /* SkDrvDeInitAdapter() */ + +/**************************************************************************** + * + * SkDrvInitAdapter - Initialize adapter (this function is only + * called if Diag deattaches from that card) + * + * Description: + * Close initialized adapter. + * + * Returns: + * 0 - on success + * error code - on error + */ +static int SkDrvInitAdapter( +SK_AC *pAC, /* pointer to adapter context */ +int devNbr) /* what device is to be handled */ +{ + struct SK_NET_DEVICE *dev; + + dev = pAC->dev[devNbr]; + + if (SkGeOpen(dev) != 0) { + return (-1); + } + + /* + ** Use correct MTU size and indicate to kernel TX queue can be started + */ + if (SkGeChangeMtu(dev, dev->mtu) != 0) { + return (-1); + } + return (0); + +} /* SkDrvInitAdapter */ + +#endif + +#ifdef DEBUG +/****************************************************************************/ +/* "debug only" section *****************************************************/ +/****************************************************************************/ + + +/***************************************************************************** + * + * DumpMsg - print a frame + * + * Description: + * This function prints frames to the system logfile/to the console. + * + * Returns: N/A + * + */ +static void DumpMsg(struct sk_buff *skb, char *str) +{ + int msglen; + + if (skb == NULL) { + printk("DumpMsg(): NULL-Message\n"); + return; + } + + if (skb->data == NULL) { + printk("DumpMsg(): Message empty\n"); + return; + } + + msglen = skb->len; + if (msglen > 64) + msglen = 64; + + printk("--- Begin of message from %s , len %d (from %d) ----\n", str, msglen, skb->len); + + DumpData((char *)skb->data, msglen); + + printk("------- End of message ---------\n"); +} /* DumpMsg */ + + + +/***************************************************************************** + * + * DumpData - print a data area + * + * Description: + * This function prints a area of data to the system logfile/to the + * console. + * + * Returns: N/A + * + */ +static void DumpData(char *p, int size) +{ +register int i; +int haddr, addr; +char hex_buffer[180]; +char asc_buffer[180]; +char HEXCHAR[] = "0123456789ABCDEF"; + + addr = 0; + haddr = 0; + hex_buffer[0] = 0; + asc_buffer[0] = 0; + for (i=0; i < size; ) { + if (*p >= '0' && *p <='z') + asc_buffer[addr] = *p; + else + asc_buffer[addr] = '.'; + addr++; + asc_buffer[addr] = 0; + hex_buffer[haddr] = HEXCHAR[(*p & 0xf0) >> 4]; + haddr++; + hex_buffer[haddr] = HEXCHAR[*p & 0x0f]; + haddr++; + hex_buffer[haddr] = ' '; + haddr++; + hex_buffer[haddr] = 0; + p++; + i++; + if (i%16 == 0) { + printk("%s %s\n", hex_buffer, asc_buffer); + addr = 0; + haddr = 0; + } + } +} /* DumpData */ + + +/***************************************************************************** + * + * DumpLong - print a data area as long values + * + * Description: + * This function prints a area of data to the system logfile/to the + * console. + * + * Returns: N/A + * + */ +static void DumpLong(char *pc, int size) +{ +register int i; +int haddr, addr; +char hex_buffer[180]; +char asc_buffer[180]; +char HEXCHAR[] = "0123456789ABCDEF"; +long *p; +int l; + + addr = 0; + haddr = 0; + hex_buffer[0] = 0; + asc_buffer[0] = 0; + p = (long*) pc; + for (i=0; i < size; ) { + l = (long) *p; + hex_buffer[haddr] = HEXCHAR[(l >> 28) & 0xf]; + haddr++; + hex_buffer[haddr] = HEXCHAR[(l >> 24) & 0xf]; + haddr++; + hex_buffer[haddr] = HEXCHAR[(l >> 20) & 0xf]; + haddr++; + hex_buffer[haddr] = HEXCHAR[(l >> 16) & 0xf]; + haddr++; + hex_buffer[haddr] = HEXCHAR[(l >> 12) & 0xf]; + haddr++; + hex_buffer[haddr] = HEXCHAR[(l >> 8) & 0xf]; + haddr++; + hex_buffer[haddr] = HEXCHAR[(l >> 4) & 0xf]; + haddr++; + hex_buffer[haddr] = HEXCHAR[l & 0x0f]; + haddr++; + hex_buffer[haddr] = ' '; + haddr++; + hex_buffer[haddr] = 0; + p++; + i++; + if (i%8 == 0) { + printk("%4x %s\n", (i-8)*4, hex_buffer); + haddr = 0; + } + } + printk("------------------------\n"); +} /* DumpLong */ + +#endif + +static int __devinit skge_probe_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + SK_AC *pAC; + DEV_NET *pNet = NULL; + struct net_device *dev = NULL; + static int boards_found = 0; + int error = -ENODEV; + int using_dac = 0; + char DeviceStr[80]; + + if (pci_enable_device(pdev)) + goto out; + + /* Configure DMA attributes. */ + if (sizeof(dma_addr_t) > sizeof(u32) && + !(error = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) { + using_dac = 1; + error = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (error < 0) { + printk(KERN_ERR "sk98lin %s unable to obtain 64 bit DMA " + "for consistent allocations\n", pci_name(pdev)); + goto out_disable_device; + } + } else { + error = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (error) { + printk(KERN_ERR "sk98lin %s no usable DMA configuration\n", + pci_name(pdev)); + goto out_disable_device; + } + } + + error = -ENOMEM; + dev = alloc_etherdev(sizeof(DEV_NET)); + if (!dev) { + printk(KERN_ERR "sk98lin: unable to allocate etherdev " + "structure!\n"); + goto out_disable_device; + } + + pNet = netdev_priv(dev); + pNet->pAC = kzalloc(sizeof(SK_AC), GFP_KERNEL); + if (!pNet->pAC) { + printk(KERN_ERR "sk98lin: unable to allocate adapter " + "structure!\n"); + goto out_free_netdev; + } + + pAC = pNet->pAC; + pAC->PciDev = pdev; + + pAC->dev[0] = dev; + pAC->dev[1] = dev; + pAC->CheckQueue = SK_FALSE; + + dev->irq = pdev->irq; + + error = SkGeInitPCI(pAC); + if (error) { + printk(KERN_ERR "sk98lin: PCI setup failed: %i\n", error); + goto out_free_netdev; + } + + SET_MODULE_OWNER(dev); + dev->open = &SkGeOpen; + dev->stop = &SkGeClose; + dev->hard_start_xmit = &SkGeXmit; + dev->get_stats = &SkGeStats; + dev->set_multicast_list = &SkGeSetRxMode; + dev->set_mac_address = &SkGeSetMacAddr; + dev->do_ioctl = &SkGeIoctl; + dev->change_mtu = &SkGeChangeMtu; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = &SkGePollController; +#endif + SET_NETDEV_DEV(dev, &pdev->dev); + SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); + + /* Use only if yukon hardware */ + if (pAC->ChipsetType) { +#ifdef USE_SK_TX_CHECKSUM + dev->features |= NETIF_F_IP_CSUM; +#endif +#ifdef SK_ZEROCOPY + dev->features |= NETIF_F_SG; +#endif +#ifdef USE_SK_RX_CHECKSUM + pAC->RxPort[0].RxCsum = 1; +#endif + } + + if (using_dac) + dev->features |= NETIF_F_HIGHDMA; + + pAC->Index = boards_found++; + + error = SkGeBoardInit(dev, pAC); + if (error) + goto out_free_netdev; + + /* Read Adapter name from VPD */ + if (ProductStr(pAC, DeviceStr, sizeof(DeviceStr)) != 0) { + error = -EIO; + printk(KERN_ERR "sk98lin: Could not read VPD data.\n"); + goto out_free_resources; + } + + /* Register net device */ + error = register_netdev(dev); + if (error) { + printk(KERN_ERR "sk98lin: Could not register device.\n"); + goto out_free_resources; + } + + /* Print adapter specific string from vpd */ + printk("%s: %s\n", dev->name, DeviceStr); + + /* Print configuration settings */ + printk(" PrefPort:%c RlmtMode:%s\n", + 'A' + pAC->Rlmt.Net[0].Port[pAC->Rlmt.Net[0].PrefPort]->PortNumber, + (pAC->RlmtMode==0) ? "Check Link State" : + ((pAC->RlmtMode==1) ? "Check Link State" : + ((pAC->RlmtMode==3) ? "Check Local Port" : + ((pAC->RlmtMode==7) ? "Check Segmentation" : + ((pAC->RlmtMode==17) ? "Dual Check Link State" :"Error"))))); + + SkGeYellowLED(pAC, pAC->IoBase, 1); + + memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + + pNet->PortNr = 0; + pNet->NetNr = 0; + + boards_found++; + + pci_set_drvdata(pdev, dev); + + /* More then one port found */ + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { + dev = alloc_etherdev(sizeof(DEV_NET)); + if (!dev) { + printk(KERN_ERR "sk98lin: unable to allocate etherdev " + "structure!\n"); + goto single_port; + } + + pNet = netdev_priv(dev); + pNet->PortNr = 1; + pNet->NetNr = 1; + pNet->pAC = pAC; + + dev->open = &SkGeOpen; + dev->stop = &SkGeClose; + dev->hard_start_xmit = &SkGeXmit; + dev->get_stats = &SkGeStats; + dev->set_multicast_list = &SkGeSetRxMode; + dev->set_mac_address = &SkGeSetMacAddr; + dev->do_ioctl = &SkGeIoctl; + dev->change_mtu = &SkGeChangeMtu; + SET_NETDEV_DEV(dev, &pdev->dev); + SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); + + if (pAC->ChipsetType) { +#ifdef USE_SK_TX_CHECKSUM + dev->features |= NETIF_F_IP_CSUM; +#endif +#ifdef SK_ZEROCOPY + dev->features |= NETIF_F_SG; +#endif +#ifdef USE_SK_RX_CHECKSUM + pAC->RxPort[1].RxCsum = 1; +#endif + } + + if (using_dac) + dev->features |= NETIF_F_HIGHDMA; + + error = register_netdev(dev); + if (error) { + printk(KERN_ERR "sk98lin: Could not register device" + " for second port. (%d)\n", error); + free_netdev(dev); + goto single_port; + } + + pAC->dev[1] = dev; + memcpy(&dev->dev_addr, + &pAC->Addr.Net[1].CurrentMacAddress, 6); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + + printk("%s: %s\n", dev->name, DeviceStr); + printk(" PrefPort:B RlmtMode:Dual Check Link State\n"); + } + +single_port: + + /* Save the hardware revision */ + pAC->HWRevision = (((pAC->GIni.GIPciHwRev >> 4) & 0x0F)*10) + + (pAC->GIni.GIPciHwRev & 0x0F); + + /* Set driver globals */ + pAC->Pnmi.pDriverFileName = DRIVER_FILE_NAME; + pAC->Pnmi.pDriverReleaseDate = DRIVER_REL_DATE; + + memset(&pAC->PnmiBackup, 0, sizeof(SK_PNMI_STRUCT_DATA)); + memcpy(&pAC->PnmiBackup, &pAC->PnmiStruct, sizeof(SK_PNMI_STRUCT_DATA)); + + return 0; + + out_free_resources: + FreeResources(dev); + out_free_netdev: + free_netdev(dev); + out_disable_device: + pci_disable_device(pdev); + out: + return error; +} + +static void __devexit skge_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + struct net_device *otherdev = pAC->dev[1]; + + unregister_netdev(dev); + + SkGeYellowLED(pAC, pAC->IoBase, 0); + + if (pAC->BoardLevel == SK_INIT_RUN) { + SK_EVPARA EvPara; + unsigned long Flags; + + /* board is still alive */ + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + EvPara.Para32[0] = 0; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + EvPara.Para32[0] = 1; + EvPara.Para32[1] = -1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); + SkEventDispatcher(pAC, pAC->IoBase); + /* disable interrupts */ + SK_OUT32(pAC->IoBase, B0_IMSK, 0); + SkGeDeInit(pAC, pAC->IoBase); + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + pAC->BoardLevel = SK_INIT_DATA; + /* We do NOT check here, if IRQ was pending, of course*/ + } + + if (pAC->BoardLevel == SK_INIT_IO) { + /* board is still alive */ + SkGeDeInit(pAC, pAC->IoBase); + pAC->BoardLevel = SK_INIT_DATA; + } + + FreeResources(dev); + free_netdev(dev); + if (otherdev != dev) + free_netdev(otherdev); + kfree(pAC); +} + +#ifdef CONFIG_PM +static int skge_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + struct net_device *otherdev = pAC->dev[1]; + + if (netif_running(dev)) { + netif_carrier_off(dev); + DoPrintInterfaceChange = SK_FALSE; + SkDrvDeInitAdapter(pAC, 0); /* performs SkGeClose */ + netif_device_detach(dev); + } + if (otherdev != dev) { + if (netif_running(otherdev)) { + netif_carrier_off(otherdev); + DoPrintInterfaceChange = SK_FALSE; + SkDrvDeInitAdapter(pAC, 1); /* performs SkGeClose */ + netif_device_detach(otherdev); + } + } + + pci_save_state(pdev); + pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); + if (pAC->AllocFlag & SK_ALLOC_IRQ) { + free_irq(dev->irq, dev); + } + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int skge_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + DEV_NET *pNet = netdev_priv(dev); + SK_AC *pAC = pNet->pAC; + struct net_device *otherdev = pAC->dev[1]; + int ret; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + ret = pci_enable_device(pdev); + if (ret) { + printk(KERN_WARNING "sk98lin: unable to enable device %s " + "in resume\n", dev->name); + goto err_out; + } + pci_set_master(pdev); + if (pAC->GIni.GIMacsFound == 2) + ret = request_irq(dev->irq, SkGeIsr, IRQF_SHARED, "sk98lin", dev); + else + ret = request_irq(dev->irq, SkGeIsrOnePort, IRQF_SHARED, "sk98lin", dev); + if (ret) { + printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq); + ret = -EBUSY; + goto err_out_disable_pdev; + } + + netif_device_attach(dev); + if (netif_running(dev)) { + DoPrintInterfaceChange = SK_FALSE; + SkDrvInitAdapter(pAC, 0); /* first device */ + } + if (otherdev != dev) { + netif_device_attach(otherdev); + if (netif_running(otherdev)) { + DoPrintInterfaceChange = SK_FALSE; + SkDrvInitAdapter(pAC, 1); /* second device */ + } + } + + return 0; + +err_out_disable_pdev: + pci_disable_device(pdev); +err_out: + pAC->AllocFlag &= ~SK_ALLOC_IRQ; + dev->irq = 0; + return ret; +} +#else +#define skge_suspend NULL +#define skge_resume NULL +#endif + +static struct pci_device_id skge_pci_tbl[] = { +#ifdef SK98LIN_ALL_DEVICES + { PCI_VENDOR_ID_3COM, 0x1700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_3COM, 0x80eb, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, +#endif +#ifdef GENESIS + /* Generic SysKonnect SK-98xx Gigabit Ethernet Server Adapter */ + { PCI_VENDOR_ID_SYSKONNECT, 0x4300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, +#endif + /* Generic SysKonnect SK-98xx V2.0 Gigabit Ethernet Adapter */ + { PCI_VENDOR_ID_SYSKONNECT, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, +#ifdef SK98LIN_ALL_DEVICES +/* DLink card does not have valid VPD so this driver gags + * { PCI_VENDOR_ID_DLINK, 0x4c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + */ + { PCI_VENDOR_ID_MARVELL, 0x4320, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_MARVELL, 0x5005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_CNET, 0x434e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_LINKSYS, 0x1032, PCI_ANY_ID, 0x0015, }, + { PCI_VENDOR_ID_LINKSYS, 0x1064, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, +#endif + { 0 } +}; + +MODULE_DEVICE_TABLE(pci, skge_pci_tbl); + +static struct pci_driver skge_driver = { + .name = "sk98lin", + .id_table = skge_pci_tbl, + .probe = skge_probe_one, + .remove = __devexit_p(skge_remove_one), + .suspend = skge_suspend, + .resume = skge_resume, +}; + +static int __init skge_init(void) +{ + printk(KERN_NOTICE "sk98lin: driver has been replaced by the skge driver" + " and is scheduled for removal\n"); + + return pci_register_driver(&skge_driver); +} + +static void __exit skge_exit(void) +{ + pci_unregister_driver(&skge_driver); +} + +module_init(skge_init); +module_exit(skge_exit); diff --git a/drivers/net/sk98lin/skgehwt.c b/drivers/net/sk98lin/skgehwt.c new file mode 100644 index 00000000000..db670993c2d --- /dev/null +++ b/drivers/net/sk98lin/skgehwt.c @@ -0,0 +1,171 @@ +/****************************************************************************** + * + * Name: skgehwt.c + * Project: Gigabit Ethernet Adapters, Event Scheduler Module + * Version: $Revision: 1.15 $ + * Date: $Date: 2003/09/16 13:41:23 $ + * Purpose: Hardware Timer + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * Event queue and dispatcher + */ +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: skgehwt.c,v 1.15 2003/09/16 13:41:23 rschmidt Exp $ (C) Marvell."; +#endif + +#include "h/skdrv1st.h" /* Driver Specific Definitions */ +#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */ + +#ifdef __C2MAN__ +/* + * Hardware Timer function queue management. + */ +intro() +{} +#endif + +/* + * Prototypes of local functions. + */ +#define SK_HWT_MAX (65000) + +/* correction factor */ +#define SK_HWT_FAC (1000 * (SK_U32)pAC->GIni.GIHstClkFact / 100) + +/* + * Initialize hardware timer. + * + * Must be called during init level 1. + */ +void SkHwtInit( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc) /* IoContext */ +{ + pAC->Hwt.TStart = 0 ; + pAC->Hwt.TStop = 0 ; + pAC->Hwt.TActive = SK_FALSE; + + SkHwtStop(pAC, Ioc); +} + +/* + * + * Start hardware timer (clock ticks are 16us). + * + */ +void SkHwtStart( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc, /* IoContext */ +SK_U32 Time) /* Time in units of 16us to load the timer with. */ +{ + SK_U32 Cnt; + + if (Time > SK_HWT_MAX) + Time = SK_HWT_MAX; + + pAC->Hwt.TStart = Time; + pAC->Hwt.TStop = 0L; + + Cnt = Time; + + /* + * if time < 16 us + * time = 16 us + */ + if (!Cnt) { + Cnt++; + } + + SK_OUT32(Ioc, B2_TI_INI, Cnt * SK_HWT_FAC); + + SK_OUT16(Ioc, B2_TI_CTRL, TIM_START); /* Start timer. */ + + pAC->Hwt.TActive = SK_TRUE; +} + +/* + * Stop hardware timer. + * and clear the timer IRQ + */ +void SkHwtStop( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc) /* IoContext */ +{ + SK_OUT16(Ioc, B2_TI_CTRL, TIM_STOP); + + SK_OUT16(Ioc, B2_TI_CTRL, TIM_CLR_IRQ); + + pAC->Hwt.TActive = SK_FALSE; +} + + +/* + * Stop hardware timer and read time elapsed since last start. + * + * returns + * The elapsed time since last start in units of 16us. + * + */ +SK_U32 SkHwtRead( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc) /* IoContext */ +{ + SK_U32 TRead; + SK_U32 IStatus; + + if (pAC->Hwt.TActive) { + + SkHwtStop(pAC, Ioc); + + SK_IN32(Ioc, B2_TI_VAL, &TRead); + TRead /= SK_HWT_FAC; + + SK_IN32(Ioc, B0_ISRC, &IStatus); + + /* Check if timer expired (or wraped around) */ + if ((TRead > pAC->Hwt.TStart) || (IStatus & IS_TIMINT)) { + + SkHwtStop(pAC, Ioc); + + pAC->Hwt.TStop = pAC->Hwt.TStart; + } + else { + + pAC->Hwt.TStop = pAC->Hwt.TStart - TRead; + } + } + return(pAC->Hwt.TStop); +} + +/* + * interrupt source= timer + */ +void SkHwtIsr( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc) /* IoContext */ +{ + SkHwtStop(pAC, Ioc); + + pAC->Hwt.TStop = pAC->Hwt.TStart; + + SkTimerDone(pAC, Ioc); +} + +/* End of file */ diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c new file mode 100644 index 00000000000..67f1d6a5c15 --- /dev/null +++ b/drivers/net/sk98lin/skgeinit.c @@ -0,0 +1,2005 @@ +/****************************************************************************** + * + * Name: skgeinit.c + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.97 $ + * Date: $Date: 2003/10/02 16:45:31 $ + * Purpose: Contains functions to initialize the adapter + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#include "h/skdrv1st.h" +#include "h/skdrv2nd.h" + +/* global variables ***********************************************************/ + +/* local variables ************************************************************/ + +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: skgeinit.c,v 1.97 2003/10/02 16:45:31 rschmidt Exp $ (C) Marvell."; +#endif + +struct s_QOffTab { + int RxQOff; /* Receive Queue Address Offset */ + int XsQOff; /* Sync Tx Queue Address Offset */ + int XaQOff; /* Async Tx Queue Address Offset */ +}; +static struct s_QOffTab QOffTab[] = { + {Q_R1, Q_XS1, Q_XA1}, {Q_R2, Q_XS2, Q_XA2} +}; + +struct s_Config { + char ScanString[8]; + SK_U32 Value; +}; + +static struct s_Config OemConfig = { + {'O','E','M','_','C','o','n','f'}, +#ifdef SK_OEM_CONFIG + OEM_CONFIG_VALUE, +#else + 0, +#endif +}; + +/****************************************************************************** + * + * SkGePollTxD() - Enable / Disable Descriptor Polling of TxD Rings + * + * Description: + * Enable or disable the descriptor polling of the transmit descriptor + * ring(s) (TxD) for port 'Port'. + * The new configuration is *not* saved over any SkGeStopPort() and + * SkGeInitPort() calls. + * + * Returns: + * nothing + */ +void SkGePollTxD( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL PollTxD) /* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */ +{ + SK_GEPORT *pPrt; + SK_U32 DWord; + + pPrt = &pAC->GIni.GP[Port]; + + DWord = (SK_U32)(PollTxD ? CSR_ENA_POL : CSR_DIS_POL); + + if (pPrt->PXSQSize != 0) { + SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), DWord); + } + + if (pPrt->PXAQSize != 0) { + SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), DWord); + } +} /* SkGePollTxD */ + + +/****************************************************************************** + * + * SkGeYellowLED() - Switch the yellow LED on or off. + * + * Description: + * Switch the yellow LED on or off. + * + * Note: + * This function may be called any time after SkGeInit(Level 1). + * + * Returns: + * nothing + */ +void SkGeYellowLED( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int State) /* yellow LED state, 0 = OFF, 0 != ON */ +{ + if (State == 0) { + /* Switch yellow LED OFF */ + SK_OUT8(IoC, B0_LED, LED_STAT_OFF); + } + else { + /* Switch yellow LED ON */ + SK_OUT8(IoC, B0_LED, LED_STAT_ON); + } +} /* SkGeYellowLED */ + + +#if (!defined(SK_SLIM) || defined(GENESIS)) +/****************************************************************************** + * + * SkGeXmitLED() - Modify the Operational Mode of a transmission LED. + * + * Description: + * The Rx or Tx LED which is specified by 'Led' will be + * enabled, disabled or switched on in test mode. + * + * Note: + * 'Led' must contain the address offset of the LEDs INI register. + * + * Usage: + * SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA); + * + * Returns: + * nothing + */ +void SkGeXmitLED( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Led, /* offset to the LED Init Value register */ +int Mode) /* Mode may be SK_LED_DIS, SK_LED_ENA, SK_LED_TST */ +{ + SK_U32 LedIni; + + switch (Mode) { + case SK_LED_ENA: + LedIni = SK_XMIT_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100; + SK_OUT32(IoC, Led + XMIT_LED_INI, LedIni); + SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START); + break; + case SK_LED_TST: + SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_ON); + SK_OUT32(IoC, Led + XMIT_LED_CNT, 100); + SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START); + break; + case SK_LED_DIS: + default: + /* + * Do NOT stop the LED Timer here. The LED might be + * in on state. But it needs to go off. + */ + SK_OUT32(IoC, Led + XMIT_LED_CNT, 0); + SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_OFF); + break; + } + + /* + * 1000BT: The Transmit LED is driven by the PHY. + * But the default LED configuration is used for + * Level One and Broadcom PHYs. + * (Broadcom: It may be that PHY_B_PEC_EN_LTR has to be set.) + * (In this case it has to be added here. But we will see. XXX) + */ +} /* SkGeXmitLED */ +#endif /* !SK_SLIM || GENESIS */ + + +/****************************************************************************** + * + * DoCalcAddr() - Calculates the start and the end address of a queue. + * + * Description: + * This function calculates the start and the end address of a queue. + * Afterwards the 'StartVal' is incremented to the next start position. + * If the port is already initialized the calculated values + * will be checked against the configured values and an + * error will be returned, if they are not equal. + * If the port is not initialized the values will be written to + * *StartAdr and *EndAddr. + * + * Returns: + * 0: success + * 1: configuration error + */ +static int DoCalcAddr( +SK_AC *pAC, /* adapter context */ +SK_GEPORT SK_FAR *pPrt, /* port index */ +int QuSize, /* size of the queue to configure in kB */ +SK_U32 SK_FAR *StartVal, /* start value for address calculation */ +SK_U32 SK_FAR *QuStartAddr,/* start addr to calculate */ +SK_U32 SK_FAR *QuEndAddr) /* end address to calculate */ +{ + SK_U32 EndVal; + SK_U32 NextStart; + int Rtv; + + Rtv = 0; + if (QuSize == 0) { + EndVal = *StartVal; + NextStart = EndVal; + } + else { + EndVal = *StartVal + ((SK_U32)QuSize * 1024) - 1; + NextStart = EndVal + 1; + } + + if (pPrt->PState >= SK_PRT_INIT) { + if (*StartVal != *QuStartAddr || EndVal != *QuEndAddr) { + Rtv = 1; + } + } + else { + *QuStartAddr = *StartVal; + *QuEndAddr = EndVal; + } + + *StartVal = NextStart; + return(Rtv); +} /* DoCalcAddr */ + +/****************************************************************************** + * + * SkGeInitAssignRamToQueues() - allocate default queue sizes + * + * Description: + * This function assigns the memory to the different queues and ports. + * When DualNet is set to SK_TRUE all ports get the same amount of memory. + * Otherwise the first port gets most of the memory and all the + * other ports just the required minimum. + * This function can only be called when pAC->GIni.GIRamSize and + * pAC->GIni.GIMacsFound have been initialized, usually this happens + * at init level 1 + * + * Returns: + * 0 - ok + * 1 - invalid input values + * 2 - not enough memory + */ + +int SkGeInitAssignRamToQueues( +SK_AC *pAC, /* Adapter context */ +int ActivePort, /* Active Port in RLMT mode */ +SK_BOOL DualNet) /* adapter context */ +{ + int i; + int UsedKilobytes; /* memory already assigned */ + int ActivePortKilobytes; /* memory available for active port */ + SK_GEPORT *pGePort; + + UsedKilobytes = 0; + + if (ActivePort >= pAC->GIni.GIMacsFound) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT, + ("SkGeInitAssignRamToQueues: ActivePort (%d) invalid\n", + ActivePort)); + return(1); + } + if (((pAC->GIni.GIMacsFound * (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE)) + + ((RAM_QUOTA_SYNC == 0) ? 0 : SK_MIN_TXQ_SIZE)) > pAC->GIni.GIRamSize) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT, + ("SkGeInitAssignRamToQueues: Not enough memory (%d)\n", + pAC->GIni.GIRamSize)); + return(2); + } + + if (DualNet) { + /* every port gets the same amount of memory */ + ActivePortKilobytes = pAC->GIni.GIRamSize / pAC->GIni.GIMacsFound; + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + + pGePort = &pAC->GIni.GP[i]; + + /* take away the minimum memory for active queues */ + ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE); + + /* receive queue gets the minimum + 80% of the rest */ + pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB(( + ActivePortKilobytes * (unsigned long) RAM_QUOTA_RX) / 100)) + + SK_MIN_RXQ_SIZE; + + ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE); + + /* synchronous transmit queue */ + pGePort->PXSQSize = 0; + + /* asynchronous transmit queue */ + pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes + + SK_MIN_TXQ_SIZE); + } + } + else { + /* Rlmt Mode or single link adapter */ + + /* Set standby queue size defaults for all standby ports */ + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + + if (i != ActivePort) { + pGePort = &pAC->GIni.GP[i]; + + pGePort->PRxQSize = SK_MIN_RXQ_SIZE; + pGePort->PXAQSize = SK_MIN_TXQ_SIZE; + pGePort->PXSQSize = 0; + + /* Count used RAM */ + UsedKilobytes += pGePort->PRxQSize + pGePort->PXAQSize; + } + } + /* what's left? */ + ActivePortKilobytes = pAC->GIni.GIRamSize - UsedKilobytes; + + /* assign it to the active port */ + /* first take away the minimum memory */ + ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE); + pGePort = &pAC->GIni.GP[ActivePort]; + + /* receive queue get's the minimum + 80% of the rest */ + pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((ActivePortKilobytes * + (unsigned long) RAM_QUOTA_RX) / 100)) + SK_MIN_RXQ_SIZE; + + ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE); + + /* synchronous transmit queue */ + pGePort->PXSQSize = 0; + + /* asynchronous transmit queue */ + pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes) + + SK_MIN_TXQ_SIZE; + } +#ifdef VCPU + VCPUprintf(0, "PRxQSize=%u, PXSQSize=%u, PXAQSize=%u\n", + pGePort->PRxQSize, pGePort->PXSQSize, pGePort->PXAQSize); +#endif /* VCPU */ + + return(0); +} /* SkGeInitAssignRamToQueues */ + +/****************************************************************************** + * + * SkGeCheckQSize() - Checks the Adapters Queue Size Configuration + * + * Description: + * This function verifies the Queue Size Configuration specified + * in the variables PRxQSize, PXSQSize, and PXAQSize of all + * used ports. + * This requirements must be fullfilled to have a valid configuration: + * - The size of all queues must not exceed GIRamSize. + * - The queue sizes must be specified in units of 8 kB. + * - The size of Rx queues of available ports must not be + * smaller than 16 kB. + * - The size of at least one Tx queue (synch. or asynch.) + * of available ports must not be smaller than 16 kB + * when Jumbo Frames are used. + * - The RAM start and end addresses must not be changed + * for ports which are already initialized. + * Furthermore SkGeCheckQSize() defines the Start and End Addresses + * of all ports and stores them into the HWAC port structure. + * + * Returns: + * 0: Queue Size Configuration valid + * 1: Queue Size Configuration invalid + */ +static int SkGeCheckQSize( +SK_AC *pAC, /* adapter context */ +int Port) /* port index */ +{ + SK_GEPORT *pPrt; + int i; + int Rtv; + int Rtv2; + SK_U32 StartAddr; +#ifndef SK_SLIM + int UsedMem; /* total memory used (max. found ports) */ +#endif + + Rtv = 0; + +#ifndef SK_SLIM + + UsedMem = 0; + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + pPrt = &pAC->GIni.GP[i]; + + if ((pPrt->PRxQSize & QZ_UNITS) != 0 || + (pPrt->PXSQSize & QZ_UNITS) != 0 || + (pPrt->PXAQSize & QZ_UNITS) != 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG); + return(1); + } + + if (i == Port && pPrt->PRxQSize < SK_MIN_RXQ_SIZE) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E011, SKERR_HWI_E011MSG); + return(1); + } + + /* + * the size of at least one Tx queue (synch. or asynch.) has to be > 0. + * if Jumbo Frames are used, this size has to be >= 16 kB. + */ + if ((i == Port && pPrt->PXSQSize == 0 && pPrt->PXAQSize == 0) || + (pAC->GIni.GIPortUsage == SK_JUMBO_LINK && + ((pPrt->PXSQSize > 0 && pPrt->PXSQSize < SK_MIN_TXQ_SIZE) || + (pPrt->PXAQSize > 0 && pPrt->PXAQSize < SK_MIN_TXQ_SIZE)))) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E023, SKERR_HWI_E023MSG); + return(1); + } + + UsedMem += pPrt->PRxQSize + pPrt->PXSQSize + pPrt->PXAQSize; + } + + if (UsedMem > pAC->GIni.GIRamSize) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG); + return(1); + } +#endif /* !SK_SLIM */ + + /* Now start address calculation */ + StartAddr = pAC->GIni.GIRamOffs; + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + pPrt = &pAC->GIni.GP[i]; + + /* Calculate/Check values for the receive queue */ + Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PRxQSize, &StartAddr, + &pPrt->PRxQRamStart, &pPrt->PRxQRamEnd); + Rtv |= Rtv2; + + /* Calculate/Check values for the synchronous Tx queue */ + Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXSQSize, &StartAddr, + &pPrt->PXsQRamStart, &pPrt->PXsQRamEnd); + Rtv |= Rtv2; + + /* Calculate/Check values for the asynchronous Tx queue */ + Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXAQSize, &StartAddr, + &pPrt->PXaQRamStart, &pPrt->PXaQRamEnd); + Rtv |= Rtv2; + + if (Rtv) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E013, SKERR_HWI_E013MSG); + return(1); + } + } + + return(0); +} /* SkGeCheckQSize */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkGeInitMacArb() - Initialize the MAC Arbiter + * + * Description: + * This function initializes the MAC Arbiter. + * It must not be called if there is still an + * initialized or active port. + * + * Returns: + * nothing + */ +static void SkGeInitMacArb( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC) /* IO context */ +{ + /* release local reset */ + SK_OUT16(IoC, B3_MA_TO_CTRL, MA_RST_CLR); + + /* configure timeout values */ + SK_OUT8(IoC, B3_MA_TOINI_RX1, SK_MAC_TO_53); + SK_OUT8(IoC, B3_MA_TOINI_RX2, SK_MAC_TO_53); + SK_OUT8(IoC, B3_MA_TOINI_TX1, SK_MAC_TO_53); + SK_OUT8(IoC, B3_MA_TOINI_TX2, SK_MAC_TO_53); + + SK_OUT8(IoC, B3_MA_RCINI_RX1, 0); + SK_OUT8(IoC, B3_MA_RCINI_RX2, 0); + SK_OUT8(IoC, B3_MA_RCINI_TX1, 0); + SK_OUT8(IoC, B3_MA_RCINI_TX2, 0); + + /* recovery values are needed for XMAC II Rev. B2 only */ + /* Fast Output Enable Mode was intended to use with Rev. B2, but now? */ + + /* + * There is no start or enable button to push, therefore + * the MAC arbiter is configured and enabled now. + */ +} /* SkGeInitMacArb */ + + +/****************************************************************************** + * + * SkGeInitPktArb() - Initialize the Packet Arbiter + * + * Description: + * This function initializes the Packet Arbiter. + * It must not be called if there is still an + * initialized or active port. + * + * Returns: + * nothing + */ +static void SkGeInitPktArb( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC) /* IO context */ +{ + /* release local reset */ + SK_OUT16(IoC, B3_PA_CTRL, PA_RST_CLR); + + /* configure timeout values */ + SK_OUT16(IoC, B3_PA_TOINI_RX1, SK_PKT_TO_MAX); + SK_OUT16(IoC, B3_PA_TOINI_RX2, SK_PKT_TO_MAX); + SK_OUT16(IoC, B3_PA_TOINI_TX1, SK_PKT_TO_MAX); + SK_OUT16(IoC, B3_PA_TOINI_TX2, SK_PKT_TO_MAX); + + /* + * enable timeout timers if jumbo frames not used + * NOTE: the packet arbiter timeout interrupt is needed for + * half duplex hangup workaround + */ + if (pAC->GIni.GIPortUsage != SK_JUMBO_LINK) { + if (pAC->GIni.GIMacsFound == 1) { + SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1); + } + else { + SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1 | PA_ENA_TO_TX2); + } + } +} /* SkGeInitPktArb */ +#endif /* GENESIS */ + + +/****************************************************************************** + * + * SkGeInitMacFifo() - Initialize the MAC FIFOs + * + * Description: + * Initialize all MAC FIFOs of the specified port + * + * Returns: + * nothing + */ +static void SkGeInitMacFifo( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U16 Word; +#ifdef VCPU + SK_U32 DWord; +#endif /* VCPU */ + /* + * For each FIFO: + * - release local reset + * - use default value for MAC FIFO size + * - setup defaults for the control register + * - enable the FIFO + */ + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* Configure Rx MAC FIFO */ + SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_CLR); + SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_RX_CTRL_DEF); + SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_ENA_OP_MD); + + /* Configure Tx MAC FIFO */ + SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_CLR); + SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF); + SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_ENA_OP_MD); + + /* Enable frame flushing if jumbo frames used */ + if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) { + SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_FLUSH); + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* set Rx GMAC FIFO Flush Mask */ + SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_MSK), (SK_U16)RX_FF_FL_DEF_MSK); + + Word = (SK_U16)GMF_RX_CTRL_DEF; + + /* disable Rx GMAC FIFO Flush for YUKON-Lite Rev. A0 only */ + if (pAC->GIni.GIYukonLite && pAC->GIni.GIChipId == CHIP_ID_YUKON) { + + Word &= ~GMF_RX_F_FL_ON; + } + + /* Configure Rx MAC FIFO */ + SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR); + SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), Word); + + /* set Rx GMAC FIFO Flush Threshold (default: 0x0a -> 56 bytes) */ + SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); + + /* Configure Tx MAC FIFO */ + SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR); + SK_OUT16(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U16)GMF_TX_CTRL_DEF); + +#ifdef VCPU + SK_IN32(IoC, MR_ADDR(Port, RX_GMF_AF_THR), &DWord); + SK_IN32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), &DWord); +#endif /* VCPU */ + + /* set Tx GMAC FIFO Almost Empty Threshold */ +/* SK_OUT32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), 0); */ + } +#endif /* YUKON */ + +} /* SkGeInitMacFifo */ + +#ifdef SK_LNK_SYNC_CNT +/****************************************************************************** + * + * SkGeLoadLnkSyncCnt() - Load the Link Sync Counter and starts counting + * + * Description: + * This function starts the Link Sync Counter of the specified + * port and enables the generation of an Link Sync IRQ. + * The Link Sync Counter may be used to detect an active link, + * if autonegotiation is not used. + * + * Note: + * o To ensure receiving the Link Sync Event the LinkSyncCounter + * should be initialized BEFORE clearing the XMAC's reset! + * o Enable IS_LNK_SYNC_M1 and IS_LNK_SYNC_M2 after calling this + * function. + * + * Returns: + * nothing + */ +void SkGeLoadLnkSyncCnt( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_U32 CntVal) /* Counter value */ +{ + SK_U32 OrgIMsk; + SK_U32 NewIMsk; + SK_U32 ISrc; + SK_BOOL IrqPend; + + /* stop counter */ + SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_STOP); + + /* + * ASIC problem: + * Each time starting the Link Sync Counter an IRQ is generated + * by the adapter. See problem report entry from 21.07.98 + * + * Workaround: Disable Link Sync IRQ and clear the unexpeced IRQ + * if no IRQ is already pending. + */ + IrqPend = SK_FALSE; + SK_IN32(IoC, B0_ISRC, &ISrc); + SK_IN32(IoC, B0_IMSK, &OrgIMsk); + if (Port == MAC_1) { + NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M1; + if ((ISrc & IS_LNK_SYNC_M1) != 0) { + IrqPend = SK_TRUE; + } + } + else { + NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M2; + if ((ISrc & IS_LNK_SYNC_M2) != 0) { + IrqPend = SK_TRUE; + } + } + if (!IrqPend) { + SK_OUT32(IoC, B0_IMSK, NewIMsk); + } + + /* load counter */ + SK_OUT32(IoC, MR_ADDR(Port, LNK_SYNC_INI), CntVal); + + /* start counter */ + SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_START); + + if (!IrqPend) { + /* clear the unexpected IRQ, and restore the interrupt mask */ + SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_CLR_IRQ); + SK_OUT32(IoC, B0_IMSK, OrgIMsk); + } +} /* SkGeLoadLnkSyncCnt*/ +#endif /* SK_LNK_SYNC_CNT */ + +#if defined(SK_DIAG) || defined(SK_CFG_SYNC) +/****************************************************************************** + * + * SkGeCfgSync() - Configure synchronous bandwidth for this port. + * + * Description: + * This function may be used to configure synchronous bandwidth + * to the specified port. This may be done any time after + * initializing the port. The configuration values are NOT saved + * in the HWAC port structure and will be overwritten any + * time when stopping and starting the port. + * Any values for the synchronous configuration will be ignored + * if the size of the synchronous queue is zero! + * + * The default configuration for the synchronous service is + * TXA_ENA_FSYNC. This means if the size of + * the synchronous queue is unequal zero but no specific + * synchronous bandwidth is configured, the synchronous queue + * will always have the 'unlimited' transmit priority! + * + * This mode will be restored if the synchronous bandwidth is + * deallocated ('IntTime' = 0 and 'LimCount' = 0). + * + * Returns: + * 0: success + * 1: parameter configuration error + * 2: try to configure quality of service although no + * synchronous queue is configured + */ +int SkGeCfgSync( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_U32 IntTime, /* Interval Timer Value in units of 8ns */ +SK_U32 LimCount, /* Number of bytes to transfer during IntTime */ +int SyncMode) /* Sync Mode: TXA_ENA_ALLOC | TXA_DIS_ALLOC | 0 */ +{ + int Rtv; + + Rtv = 0; + + /* check the parameters */ + if (LimCount > IntTime || + (LimCount == 0 && IntTime != 0) || + (LimCount != 0 && IntTime == 0)) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG); + return(1); + } + + if (pAC->GIni.GP[Port].PXSQSize == 0) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E009, SKERR_HWI_E009MSG); + return(2); + } + + /* calculate register values */ + IntTime = (IntTime / 2) * pAC->GIni.GIHstClkFact / 100; + LimCount = LimCount / 8; + + if (IntTime > TXA_MAX_VAL || LimCount > TXA_MAX_VAL) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG); + return(1); + } + + /* + * - Enable 'Force Sync' to ensure the synchronous queue + * has the priority while configuring the new values. + * - Also 'disable alloc' to ensure the settings complies + * to the SyncMode parameter. + * - Disable 'Rate Control' to configure the new values. + * - write IntTime and LimCount + * - start 'Rate Control' and disable 'Force Sync' + * if Interval Timer or Limit Counter not zero. + */ + SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), + TXA_ENA_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); + + SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), IntTime); + SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), LimCount); + + SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), + (SK_U8)(SyncMode & (TXA_ENA_ALLOC | TXA_DIS_ALLOC))); + + if (IntTime != 0 || LimCount != 0) { + SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_DIS_FSYNC | TXA_START_RC); + } + + return(0); +} /* SkGeCfgSync */ +#endif /* SK_DIAG || SK_CFG_SYNC*/ + + +/****************************************************************************** + * + * DoInitRamQueue() - Initialize the RAM Buffer Address of a single Queue + * + * Desccription: + * If the queue is used, enable and initialize it. + * Make sure the queue is still reset, if it is not used. + * + * Returns: + * nothing + */ +static void DoInitRamQueue( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int QuIoOffs, /* Queue IO Address Offset */ +SK_U32 QuStartAddr, /* Queue Start Address */ +SK_U32 QuEndAddr, /* Queue End Address */ +int QuType) /* Queue Type (SK_RX_SRAM_Q|SK_RX_BRAM_Q|SK_TX_RAM_Q) */ +{ + SK_U32 RxUpThresVal; + SK_U32 RxLoThresVal; + + if (QuStartAddr != QuEndAddr) { + /* calculate thresholds, assume we have a big Rx queue */ + RxUpThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_ULPP) / 8; + RxLoThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_LLPP_B)/8; + + /* build HW address format */ + QuStartAddr = QuStartAddr / 8; + QuEndAddr = QuEndAddr / 8; + + /* release local reset */ + SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_CLR); + + /* configure addresses */ + SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_START), QuStartAddr); + SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_END), QuEndAddr); + SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_WP), QuStartAddr); + SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RP), QuStartAddr); + + switch (QuType) { + case SK_RX_SRAM_Q: + /* configure threshold for small Rx Queue */ + RxLoThresVal += (SK_RB_LLPP_B - SK_RB_LLPP_S) / 8; + + /* continue with SK_RX_BRAM_Q */ + case SK_RX_BRAM_Q: + /* write threshold for Rx Queue */ + + SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_UTPP), RxUpThresVal); + SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_LTPP), RxLoThresVal); + + /* the high priority threshold not used */ + break; + case SK_TX_RAM_Q: + /* + * Do NOT use Store & Forward under normal operation due to + * performance optimization (GENESIS only). + * But if Jumbo Frames are configured (XMAC Tx FIFO is only 4 kB) + * or YUKON is used ((GMAC Tx FIFO is only 1 kB) + * we NEED Store & Forward of the RAM buffer. + */ + if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK || + pAC->GIni.GIYukon) { + /* enable Store & Forward Mode for the Tx Side */ + SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_STFWD); + } + break; + } + + /* set queue operational */ + SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_OP_MD); + } + else { + /* ensure the queue is still disabled */ + SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_SET); + } +} /* DoInitRamQueue */ + + +/****************************************************************************** + * + * SkGeInitRamBufs() - Initialize the RAM Buffer Queues + * + * Description: + * Initialize all RAM Buffer Queues of the specified port + * + * Returns: + * nothing + */ +static void SkGeInitRamBufs( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + int RxQType; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PRxQSize == SK_MIN_RXQ_SIZE) { + RxQType = SK_RX_SRAM_Q; /* small Rx Queue */ + } + else { + RxQType = SK_RX_BRAM_Q; /* big Rx Queue */ + } + + DoInitRamQueue(pAC, IoC, pPrt->PRxQOff, pPrt->PRxQRamStart, + pPrt->PRxQRamEnd, RxQType); + + DoInitRamQueue(pAC, IoC, pPrt->PXsQOff, pPrt->PXsQRamStart, + pPrt->PXsQRamEnd, SK_TX_RAM_Q); + + DoInitRamQueue(pAC, IoC, pPrt->PXaQOff, pPrt->PXaQRamStart, + pPrt->PXaQRamEnd, SK_TX_RAM_Q); + +} /* SkGeInitRamBufs */ + + +/****************************************************************************** + * + * SkGeInitRamIface() - Initialize the RAM Interface + * + * Description: + * This function initializes the Adapters RAM Interface. + * + * Note: + * This function is used in the diagnostics. + * + * Returns: + * nothing + */ +static void SkGeInitRamIface( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC) /* IO context */ +{ + /* release local reset */ + SK_OUT16(IoC, B3_RI_CTRL, RI_RST_CLR); + + /* configure timeout values */ + SK_OUT8(IoC, B3_RI_WTO_R1, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_WTO_XA1, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_WTO_XS1, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_RTO_R1, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_RTO_XA1, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_RTO_XS1, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_WTO_R2, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_WTO_XA2, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_WTO_XS2, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_RTO_R2, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_RTO_XA2, SK_RI_TO_53); + SK_OUT8(IoC, B3_RI_RTO_XS2, SK_RI_TO_53); + +} /* SkGeInitRamIface */ + + +/****************************************************************************** + * + * SkGeInitBmu() - Initialize the BMU state machines + * + * Description: + * Initialize all BMU state machines of the specified port + * + * Returns: + * nothing + */ +static void SkGeInitBmu( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U32 RxWm; + SK_U32 TxWm; + + pPrt = &pAC->GIni.GP[Port]; + + RxWm = SK_BMU_RX_WM; + TxWm = SK_BMU_TX_WM; + + if (!pAC->GIni.GIPciSlot64 && !pAC->GIni.GIPciClock66) { + /* for better performance */ + RxWm /= 2; + TxWm /= 2; + } + + /* Rx Queue: Release all local resets and set the watermark */ + SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_CLR_RESET); + SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_F), RxWm); + + /* + * Tx Queue: Release all local resets if the queue is used ! + * set watermark + */ + if (pPrt->PXSQSize != 0) { + SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_CLR_RESET); + SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_F), TxWm); + } + + if (pPrt->PXAQSize != 0) { + SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_CLR_RESET); + SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_F), TxWm); + } + /* + * Do NOT enable the descriptor poll timers here, because + * the descriptor addresses are not specified yet. + */ +} /* SkGeInitBmu */ + + +/****************************************************************************** + * + * TestStopBit() - Test the stop bit of the queue + * + * Description: + * Stopping a queue is not as simple as it seems to be. + * If descriptor polling is enabled, it may happen + * that RX/TX stop is done and SV idle is NOT set. + * In this case we have to issue another stop command. + * + * Returns: + * The queues control status register + */ +static SK_U32 TestStopBit( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int QuIoOffs) /* Queue IO Address Offset */ +{ + SK_U32 QuCsr; /* CSR contents */ + + SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr); + + if ((QuCsr & (CSR_STOP | CSR_SV_IDLE)) == 0) { + /* Stop Descriptor overridden by start command */ + SK_OUT32(IoC, Q_ADDR(QuIoOffs, Q_CSR), CSR_STOP); + + SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr); + } + + return(QuCsr); +} /* TestStopBit */ + + +/****************************************************************************** + * + * SkGeStopPort() - Stop the Rx/Tx activity of the port 'Port'. + * + * Description: + * After calling this function the descriptor rings and Rx and Tx + * queues of this port may be reconfigured. + * + * It is possible to stop the receive and transmit path separate or + * both together. + * + * Dir = SK_STOP_TX Stops the transmit path only and resets the MAC. + * The receive queue is still active and + * the pending Rx frames may be still transferred + * into the RxD. + * SK_STOP_RX Stop the receive path. The tansmit path + * has to be stopped once before. + * SK_STOP_ALL SK_STOP_TX + SK_STOP_RX + * + * RstMode = SK_SOFT_RST Resets the MAC. The PHY is still alive. + * SK_HARD_RST Resets the MAC and the PHY. + * + * Example: + * 1) A Link Down event was signaled for a port. Therefore the activity + * of this port should be stopped and a hardware reset should be issued + * to enable the workaround of XMAC Errata #2. But the received frames + * should not be discarded. + * ... + * SkGeStopPort(pAC, IoC, Port, SK_STOP_TX, SK_HARD_RST); + * (transfer all pending Rx frames) + * SkGeStopPort(pAC, IoC, Port, SK_STOP_RX, SK_HARD_RST); + * ... + * + * 2) An event was issued which request the driver to switch + * the 'virtual active' link to an other already active port + * as soon as possible. The frames in the receive queue of this + * port may be lost. But the PHY must not be reset during this + * event. + * ... + * SkGeStopPort(pAC, IoC, Port, SK_STOP_ALL, SK_SOFT_RST); + * ... + * + * Extended Description: + * If SK_STOP_TX is set, + * o disable the MAC's receive and transmitter to prevent + * from sending incomplete frames + * o stop the port's transmit queues before terminating the + * BMUs to prevent from performing incomplete PCI cycles + * on the PCI bus + * - The network Rx and Tx activity and PCI Tx transfer is + * disabled now. + * o reset the MAC depending on the RstMode + * o Stop Interval Timer and Limit Counter of Tx Arbiter, + * also disable Force Sync bit and Enable Alloc bit. + * o perform a local reset of the port's Tx path + * - reset the PCI FIFO of the async Tx queue + * - reset the PCI FIFO of the sync Tx queue + * - reset the RAM Buffer async Tx queue + * - reset the RAM Buffer sync Tx queue + * - reset the MAC Tx FIFO + * o switch Link and Tx LED off, stop the LED counters + * + * If SK_STOP_RX is set, + * o stop the port's receive queue + * - The path data transfer activity is fully stopped now. + * o perform a local reset of the port's Rx path + * - reset the PCI FIFO of the Rx queue + * - reset the RAM Buffer receive queue + * - reset the MAC Rx FIFO + * o switch Rx LED off, stop the LED counter + * + * If all ports are stopped, + * o reset the RAM Interface. + * + * Notes: + * o This function may be called during the driver states RESET_PORT and + * SWITCH_PORT. + */ +void SkGeStopPort( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* I/O context */ +int Port, /* port to stop (MAC_1 + n) */ +int Dir, /* Direction to Stop (SK_STOP_RX, SK_STOP_TX, SK_STOP_ALL) */ +int RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */ +{ +#ifndef SK_DIAG + SK_EVPARA Para; +#endif /* !SK_DIAG */ + SK_GEPORT *pPrt; + SK_U32 DWord; + SK_U32 XsCsr; + SK_U32 XaCsr; + SK_U64 ToutStart; + int i; + int ToutCnt; + + pPrt = &pAC->GIni.GP[Port]; + + if ((Dir & SK_STOP_TX) != 0) { + /* disable receiver and transmitter */ + SkMacRxTxDisable(pAC, IoC, Port); + + /* stop both transmit queues */ + /* + * If the BMU is in the reset state CSR_STOP will terminate + * immediately. + */ + SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_STOP); + SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_STOP); + + ToutStart = SkOsGetTime(pAC); + ToutCnt = 0; + do { + /* + * Clear packet arbiter timeout to make sure + * this loop will terminate. + */ + SK_OUT16(IoC, B3_PA_CTRL, (SK_U16)((Port == MAC_1) ? + PA_CLR_TO_TX1 : PA_CLR_TO_TX2)); + + /* + * If the transfer stucks at the MAC the STOP command will not + * terminate if we don't flush the XMAC's transmit FIFO ! + */ + SkMacFlushTxFifo(pAC, IoC, Port); + + XsCsr = TestStopBit(pAC, IoC, pPrt->PXsQOff); + XaCsr = TestStopBit(pAC, IoC, pPrt->PXaQOff); + + if (SkOsGetTime(pAC) - ToutStart > (SK_TICKS_PER_SEC / 18)) { + /* + * Timeout of 1/18 second reached. + * This needs to be checked at 1/18 sec only. + */ + ToutCnt++; + if (ToutCnt > 1) { + /* Might be a problem when the driver event handler + * calls StopPort again. XXX. + */ + + /* Fatal Error, Loop aborted */ + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E018, + SKERR_HWI_E018MSG); +#ifndef SK_DIAG + Para.Para64 = Port; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); +#endif /* !SK_DIAG */ + return; + } + /* + * Cache incoherency workaround: Assume a start command + * has been lost while sending the frame. + */ + ToutStart = SkOsGetTime(pAC); + + if ((XsCsr & CSR_STOP) != 0) { + SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_START); + } + if ((XaCsr & CSR_STOP) != 0) { + SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_START); + } + } + + /* + * Because of the ASIC problem report entry from 21.08.1998 it is + * required to wait until CSR_STOP is reset and CSR_SV_IDLE is set. + */ + } while ((XsCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE || + (XaCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE); + + /* Reset the MAC depending on the RstMode */ + if (RstMode == SK_SOFT_RST) { + SkMacSoftRst(pAC, IoC, Port); + } + else { + SkMacHardRst(pAC, IoC, Port); + } + + /* Disable Force Sync bit and Enable Alloc bit */ + SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), + TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); + + /* Stop Interval Timer and Limit Counter of Tx Arbiter */ + SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), 0L); + SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), 0L); + + /* Perform a local reset of the port's Tx path */ + + /* Reset the PCI FIFO of the async Tx queue */ + SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_SET_RESET); + /* Reset the PCI FIFO of the sync Tx queue */ + SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_SET_RESET); + /* Reset the RAM Buffer async Tx queue */ + SK_OUT8(IoC, RB_ADDR(pPrt->PXaQOff, RB_CTRL), RB_RST_SET); + /* Reset the RAM Buffer sync Tx queue */ + SK_OUT8(IoC, RB_ADDR(pPrt->PXsQOff, RB_CTRL), RB_RST_SET); + + /* Reset Tx MAC FIFO */ +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* Note: MFF_RST_SET does NOT reset the XMAC ! */ + SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_SET); + + /* switch Link and Tx LED off, stop the LED counters */ + /* Link LED is switched off by the RLMT and the Diag itself */ + SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_DIS); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* Reset TX MAC FIFO */ + SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_SET); + } +#endif /* YUKON */ + } + + if ((Dir & SK_STOP_RX) != 0) { + /* + * The RX Stop Command will not terminate if no buffers + * are queued in the RxD ring. But it will always reach + * the Idle state. Therefore we can use this feature to + * stop the transfer of received packets. + */ + /* stop the port's receive queue */ + SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_STOP); + + i = 100; + do { + /* + * Clear packet arbiter timeout to make sure + * this loop will terminate + */ + SK_OUT16(IoC, B3_PA_CTRL, (SK_U16)((Port == MAC_1) ? + PA_CLR_TO_RX1 : PA_CLR_TO_RX2)); + + DWord = TestStopBit(pAC, IoC, pPrt->PRxQOff); + + /* timeout if i==0 (bug fix for #10748) */ + if (--i == 0) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E024, + SKERR_HWI_E024MSG); + break; + } + /* + * because of the ASIC problem report entry from 21.08.98 + * it is required to wait until CSR_STOP is reset and + * CSR_SV_IDLE is set. + */ + } while ((DWord & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE); + + /* The path data transfer activity is fully stopped now */ + + /* Perform a local reset of the port's Rx path */ + + /* Reset the PCI FIFO of the Rx queue */ + SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_SET_RESET); + /* Reset the RAM Buffer receive queue */ + SK_OUT8(IoC, RB_ADDR(pPrt->PRxQOff, RB_CTRL), RB_RST_SET); + + /* Reset Rx MAC FIFO */ +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_SET); + + /* switch Rx LED off, stop the LED counter */ + SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_DIS); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* Reset Rx MAC FIFO */ + SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_SET); + } +#endif /* YUKON */ + } +} /* SkGeStopPort */ + + +/****************************************************************************** + * + * SkGeInit0() - Level 0 Initialization + * + * Description: + * - Initialize the BMU address offsets + * + * Returns: + * nothing + */ +static void SkGeInit0( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC) /* IO context */ +{ + int i; + SK_GEPORT *pPrt; + + for (i = 0; i < SK_MAX_MACS; i++) { + pPrt = &pAC->GIni.GP[i]; + + pPrt->PState = SK_PRT_RESET; + pPrt->PRxQOff = QOffTab[i].RxQOff; + pPrt->PXsQOff = QOffTab[i].XsQOff; + pPrt->PXaQOff = QOffTab[i].XaQOff; + pPrt->PCheckPar = SK_FALSE; + pPrt->PIsave = 0; + pPrt->PPrevShorts = 0; + pPrt->PLinkResCt = 0; + pPrt->PAutoNegTOCt = 0; + pPrt->PPrevRx = 0; + pPrt->PPrevFcs = 0; + pPrt->PRxLim = SK_DEF_RX_WA_LIM; + pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL; + pPrt->PLinkSpeedCap = (SK_U8)SK_LSPEED_CAP_1000MBPS; + pPrt->PLinkSpeed = (SK_U8)SK_LSPEED_1000MBPS; + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_UNKNOWN; + pPrt->PLinkModeConf = (SK_U8)SK_LMODE_AUTOSENSE; + pPrt->PFlowCtrlMode = (SK_U8)SK_FLOW_MODE_SYM_OR_REM; + pPrt->PLinkCap = (SK_U8)(SK_LMODE_CAP_HALF | SK_LMODE_CAP_FULL | + SK_LMODE_CAP_AUTOHALF | SK_LMODE_CAP_AUTOFULL); + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; + pPrt->PFlowCtrlCap = (SK_U8)SK_FLOW_MODE_SYM_OR_REM; + pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE; + pPrt->PMSCap = 0; + pPrt->PMSMode = (SK_U8)SK_MS_MODE_AUTO; + pPrt->PMSStatus = (SK_U8)SK_MS_STAT_UNSET; + pPrt->PLipaAutoNeg = (SK_U8)SK_LIPA_UNKNOWN; + pPrt->PAutoNegFail = SK_FALSE; + pPrt->PHWLinkUp = SK_FALSE; + pPrt->PLinkBroken = SK_TRUE; /* See WA code */ + pPrt->PPhyPowerState = PHY_PM_OPERATIONAL_MODE; + pPrt->PMacColThres = TX_COL_DEF; + pPrt->PMacJamLen = TX_JAM_LEN_DEF; + pPrt->PMacJamIpgVal = TX_JAM_IPG_DEF; + pPrt->PMacJamIpgData = TX_IPG_JAM_DEF; + pPrt->PMacIpgData = IPG_DATA_DEF; + pPrt->PMacLimit4 = SK_FALSE; + } + + pAC->GIni.GIPortUsage = SK_RED_LINK; + pAC->GIni.GILedBlinkCtrl = (SK_U16)OemConfig.Value; + pAC->GIni.GIValIrqMask = IS_ALL_MSK; + +} /* SkGeInit0*/ + + +/****************************************************************************** + * + * SkGeInit1() - Level 1 Initialization + * + * Description: + * o Do a software reset. + * o Clear all reset bits. + * o Verify that the detected hardware is present. + * Return an error if not. + * o Get the hardware configuration + * + Read the number of MACs/Ports. + * + Read the RAM size. + * + Read the PCI Revision Id. + * + Find out the adapters host clock speed + * + Read and check the PHY type + * + * Returns: + * 0: success + * 5: Unexpected PHY type detected + * 6: HW self test failed + */ +static int SkGeInit1( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC) /* IO context */ +{ + SK_U8 Byte; + SK_U16 Word; + SK_U16 CtrlStat; + SK_U32 DWord; + int RetVal; + int i; + + RetVal = 0; + + /* save CLK_RUN bits (YUKON-Lite) */ + SK_IN16(IoC, B0_CTST, &CtrlStat); + + /* do the SW-reset */ + SK_OUT8(IoC, B0_CTST, CS_RST_SET); + + /* release the SW-reset */ + SK_OUT8(IoC, B0_CTST, CS_RST_CLR); + + /* reset all error bits in the PCI STATUS register */ + /* + * Note: PCI Cfg cycles cannot be used, because they are not + * available on some platforms after 'boot time'. + */ + SK_IN16(IoC, PCI_C(PCI_STATUS), &Word); + + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON); + SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS)); + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + + /* release Master Reset */ + SK_OUT8(IoC, B0_CTST, CS_MRST_CLR); + +#ifdef CLK_RUN + CtrlStat |= CS_CLK_RUN_ENA; +#endif /* CLK_RUN */ + + /* restore CLK_RUN bits */ + SK_OUT16(IoC, B0_CTST, (SK_U16)(CtrlStat & + (CS_CLK_RUN_HOT | CS_CLK_RUN_RST | CS_CLK_RUN_ENA))); + + /* read Chip Identification Number */ + SK_IN8(IoC, B2_CHIP_ID, &Byte); + pAC->GIni.GIChipId = Byte; + + /* read number of MACs */ + SK_IN8(IoC, B2_MAC_CFG, &Byte); + pAC->GIni.GIMacsFound = (Byte & CFG_SNG_MAC) ? 1 : 2; + + /* get Chip Revision Number */ + pAC->GIni.GIChipRev = (SK_U8)((Byte & CFG_CHIP_R_MSK) >> 4); + + /* get diff. PCI parameters */ + SK_IN16(IoC, B0_CTST, &CtrlStat); + + /* read the adapters RAM size */ + SK_IN8(IoC, B2_E_0, &Byte); + + pAC->GIni.GIGenesis = SK_FALSE; + pAC->GIni.GIYukon = SK_FALSE; + pAC->GIni.GIYukonLite = SK_FALSE; + +#ifdef GENESIS + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { + + pAC->GIni.GIGenesis = SK_TRUE; + + if (Byte == (SK_U8)3) { + /* special case: 4 x 64k x 36, offset = 0x80000 */ + pAC->GIni.GIRamSize = 1024; + pAC->GIni.GIRamOffs = (SK_U32)512 * 1024; + } + else { + pAC->GIni.GIRamSize = (int)Byte * 512; + pAC->GIni.GIRamOffs = 0; + } + /* all GE adapters work with 53.125 MHz host clock */ + pAC->GIni.GIHstClkFact = SK_FACT_53; + + /* set Descr. Poll Timer Init Value to 250 ms */ + pAC->GIni.GIPollTimerVal = + SK_DPOLL_DEF * (SK_U32)pAC->GIni.GIHstClkFact / 100; + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIChipId != CHIP_ID_GENESIS) { + + pAC->GIni.GIYukon = SK_TRUE; + + pAC->GIni.GIRamSize = (Byte == (SK_U8)0) ? 128 : (int)Byte * 4; + + pAC->GIni.GIRamOffs = 0; + + /* WA for chip Rev. A */ + pAC->GIni.GIWolOffs = (pAC->GIni.GIChipId == CHIP_ID_YUKON && + pAC->GIni.GIChipRev == 0) ? WOL_REG_OFFS : 0; + + /* get PM Capabilities of PCI config space */ + SK_IN16(IoC, PCI_C(PCI_PM_CAP_REG), &Word); + + /* check if VAUX is available */ + if (((CtrlStat & CS_VAUX_AVAIL) != 0) && + /* check also if PME from D3cold is set */ + ((Word & PCI_PME_D3C_SUP) != 0)) { + /* set entry in GE init struct */ + pAC->GIni.GIVauxAvail = SK_TRUE; + } + + if (pAC->GIni.GIChipId == CHIP_ID_YUKON_LITE) { + /* this is Rev. A1 */ + pAC->GIni.GIYukonLite = SK_TRUE; + } + else { + /* save Flash-Address Register */ + SK_IN32(IoC, B2_FAR, &DWord); + + /* test Flash-Address Register */ + SK_OUT8(IoC, B2_FAR + 3, 0xff); + SK_IN8(IoC, B2_FAR + 3, &Byte); + + if (Byte != 0) { + /* this is Rev. A0 */ + pAC->GIni.GIYukonLite = SK_TRUE; + + /* restore Flash-Address Register */ + SK_OUT32(IoC, B2_FAR, DWord); + } + } + + /* switch power to VCC (WA for VAUX problem) */ + SK_OUT8(IoC, B0_POWER_CTRL, (SK_U8)(PC_VAUX_ENA | PC_VCC_ENA | + PC_VAUX_OFF | PC_VCC_ON)); + + /* read the Interrupt source */ + SK_IN32(IoC, B0_ISRC, &DWord); + + if ((DWord & IS_HW_ERR) != 0) { + /* read the HW Error Interrupt source */ + SK_IN32(IoC, B0_HWE_ISRC, &DWord); + + if ((DWord & IS_IRQ_SENSOR) != 0) { + /* disable HW Error IRQ */ + pAC->GIni.GIValIrqMask &= ~IS_HW_ERR; + } + } + + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + /* set GMAC Link Control reset */ + SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_SET); + + /* clear GMAC Link Control reset */ + SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_CLR); + } + /* all YU chips work with 78.125 MHz host clock */ + pAC->GIni.GIHstClkFact = SK_FACT_78; + + pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX; /* 215 ms */ + } +#endif /* YUKON */ + + /* check if 64-bit PCI Slot is present */ + pAC->GIni.GIPciSlot64 = (SK_BOOL)((CtrlStat & CS_BUS_SLOT_SZ) != 0); + + /* check if 66 MHz PCI Clock is active */ + pAC->GIni.GIPciClock66 = (SK_BOOL)((CtrlStat & CS_BUS_CLOCK) != 0); + + /* read PCI HW Revision Id. */ + SK_IN8(IoC, PCI_C(PCI_REV_ID), &Byte); + pAC->GIni.GIPciHwRev = Byte; + + /* read the PMD type */ + SK_IN8(IoC, B2_PMD_TYP, &Byte); + pAC->GIni.GICopperType = (SK_U8)(Byte == 'T'); + + /* read the PHY type */ + SK_IN8(IoC, B2_E_1, &Byte); + + Byte &= 0x0f; /* the PHY type is stored in the lower nibble */ + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + switch (Byte) { + case SK_PHY_XMAC: + pAC->GIni.GP[i].PhyAddr = PHY_ADDR_XMAC; + break; + case SK_PHY_BCOM: + pAC->GIni.GP[i].PhyAddr = PHY_ADDR_BCOM; + pAC->GIni.GP[i].PMSCap = (SK_U8)(SK_MS_CAP_AUTO | + SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE); + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + pAC->GIni.GP[i].PhyAddr = PHY_ADDR_LONE; + break; + case SK_PHY_NAT: + pAC->GIni.GP[i].PhyAddr = PHY_ADDR_NAT; + break; +#endif /* OTHER_PHY */ + default: + /* ERROR: unexpected PHY type detected */ + RetVal = 5; + break; + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + if (Byte < (SK_U8)SK_PHY_MARV_COPPER) { + /* if this field is not initialized */ + Byte = (SK_U8)SK_PHY_MARV_COPPER; + + pAC->GIni.GICopperType = SK_TRUE; + } + + pAC->GIni.GP[i].PhyAddr = PHY_ADDR_MARV; + + if (pAC->GIni.GICopperType) { + + pAC->GIni.GP[i].PLinkSpeedCap = (SK_U8)(SK_LSPEED_CAP_AUTO | + SK_LSPEED_CAP_10MBPS | SK_LSPEED_CAP_100MBPS | + SK_LSPEED_CAP_1000MBPS); + + pAC->GIni.GP[i].PLinkSpeed = (SK_U8)SK_LSPEED_AUTO; + + pAC->GIni.GP[i].PMSCap = (SK_U8)(SK_MS_CAP_AUTO | + SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE); + } + else { + Byte = (SK_U8)SK_PHY_MARV_FIBER; + } + } +#endif /* YUKON */ + + pAC->GIni.GP[i].PhyType = (int)Byte; + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT, + ("PHY type: %d PHY addr: %04x\n", Byte, + pAC->GIni.GP[i].PhyAddr)); + } + + /* get MAC Type & set function pointers dependent on */ +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + pAC->GIni.GIMacType = SK_MAC_XMAC; + + pAC->GIni.GIFunc.pFnMacUpdateStats = SkXmUpdateStats; + pAC->GIni.GIFunc.pFnMacStatistic = SkXmMacStatistic; + pAC->GIni.GIFunc.pFnMacResetCounter = SkXmResetCounter; + pAC->GIni.GIFunc.pFnMacOverflow = SkXmOverflowStatus; + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + pAC->GIni.GIMacType = SK_MAC_GMAC; + + pAC->GIni.GIFunc.pFnMacUpdateStats = SkGmUpdateStats; + pAC->GIni.GIFunc.pFnMacStatistic = SkGmMacStatistic; + pAC->GIni.GIFunc.pFnMacResetCounter = SkGmResetCounter; + pAC->GIni.GIFunc.pFnMacOverflow = SkGmOverflowStatus; + +#ifdef SPECIAL_HANDLING + if (pAC->GIni.GIChipId == CHIP_ID_YUKON) { + /* check HW self test result */ + SK_IN8(IoC, B2_E_3, &Byte); + if (Byte & B2_E3_RES_MASK) { + RetVal = 6; + } + } +#endif + } +#endif /* YUKON */ + + return(RetVal); +} /* SkGeInit1 */ + + +/****************************************************************************** + * + * SkGeInit2() - Level 2 Initialization + * + * Description: + * - start the Blink Source Counter + * - start the Descriptor Poll Timer + * - configure the MAC-Arbiter + * - configure the Packet-Arbiter + * - enable the Tx Arbiters + * - enable the RAM Interface Arbiter + * + * Returns: + * nothing + */ +static void SkGeInit2( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC) /* IO context */ +{ +#ifdef GENESIS + SK_U32 DWord; +#endif /* GENESIS */ + int i; + + /* start the Descriptor Poll Timer */ + if (pAC->GIni.GIPollTimerVal != 0) { + if (pAC->GIni.GIPollTimerVal > SK_DPOLL_MAX) { + pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX; + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E017, SKERR_HWI_E017MSG); + } + SK_OUT32(IoC, B28_DPT_INI, pAC->GIni.GIPollTimerVal); + SK_OUT8(IoC, B28_DPT_CTRL, DPT_START); + } + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* start the Blink Source Counter */ + DWord = SK_BLK_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100; + + SK_OUT32(IoC, B2_BSC_INI, DWord); + SK_OUT8(IoC, B2_BSC_CTRL, BSC_START); + + /* + * Configure the MAC Arbiter and the Packet Arbiter. + * They will be started once and never be stopped. + */ + SkGeInitMacArb(pAC, IoC); + + SkGeInitPktArb(pAC, IoC); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* start Time Stamp Timer */ + SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_START); + } +#endif /* YUKON */ + + /* enable the Tx Arbiters */ + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + SK_OUT8(IoC, MR_ADDR(i, TXA_CTRL), TXA_ENA_ARB); + } + + /* enable the RAM Interface Arbiter */ + SkGeInitRamIface(pAC, IoC); + +} /* SkGeInit2 */ + +/****************************************************************************** + * + * SkGeInit() - Initialize the GE Adapter with the specified level. + * + * Description: + * Level 0: Initialize the Module structures. + * Level 1: Generic Hardware Initialization. The IOP/MemBase pointer has + * to be set before calling this level. + * + * o Do a software reset. + * o Clear all reset bits. + * o Verify that the detected hardware is present. + * Return an error if not. + * o Get the hardware configuration + * + Set GIMacsFound with the number of MACs. + * + Store the RAM size in GIRamSize. + * + Save the PCI Revision ID in GIPciHwRev. + * o return an error + * if Number of MACs > SK_MAX_MACS + * + * After returning from Level 0 the adapter + * may be accessed with IO operations. + * + * Level 2: start the Blink Source Counter + * + * Returns: + * 0: success + * 1: Number of MACs exceeds SK_MAX_MACS (after level 1) + * 2: Adapter not present or not accessible + * 3: Illegal initialization level + * 4: Initialization Level 1 Call missing + * 5: Unexpected PHY type detected + * 6: HW self test failed + */ +int SkGeInit( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Level) /* initialization level */ +{ + int RetVal; /* return value */ + SK_U32 DWord; + + RetVal = 0; + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT, + ("SkGeInit(Level %d)\n", Level)); + + switch (Level) { + case SK_INIT_DATA: + /* Initialization Level 0 */ + SkGeInit0(pAC, IoC); + pAC->GIni.GILevel = SK_INIT_DATA; + break; + + case SK_INIT_IO: + /* Initialization Level 1 */ + RetVal = SkGeInit1(pAC, IoC); + if (RetVal != 0) { + break; + } + + /* check if the adapter seems to be accessible */ + SK_OUT32(IoC, B2_IRQM_INI, SK_TEST_VAL); + SK_IN32(IoC, B2_IRQM_INI, &DWord); + SK_OUT32(IoC, B2_IRQM_INI, 0L); + + if (DWord != SK_TEST_VAL) { + RetVal = 2; + break; + } + + /* check if the number of GIMacsFound matches SK_MAX_MACS */ + if (pAC->GIni.GIMacsFound > SK_MAX_MACS) { + RetVal = 1; + break; + } + + /* Level 1 successfully passed */ + pAC->GIni.GILevel = SK_INIT_IO; + break; + + case SK_INIT_RUN: + /* Initialization Level 2 */ + if (pAC->GIni.GILevel != SK_INIT_IO) { +#ifndef SK_DIAG + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E002, SKERR_HWI_E002MSG); +#endif /* !SK_DIAG */ + RetVal = 4; + break; + } + SkGeInit2(pAC, IoC); + + /* Level 2 successfully passed */ + pAC->GIni.GILevel = SK_INIT_RUN; + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E003, SKERR_HWI_E003MSG); + RetVal = 3; + break; + } + + return(RetVal); +} /* SkGeInit */ + + +/****************************************************************************** + * + * SkGeDeInit() - Deinitialize the adapter + * + * Description: + * All ports of the adapter will be stopped if not already done. + * Do a software reset and switch off all LEDs. + * + * Returns: + * nothing + */ +void SkGeDeInit( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC) /* IO context */ +{ + int i; + SK_U16 Word; + +#if (!defined(SK_SLIM) && !defined(VCPU)) + /* ensure I2C is ready */ + SkI2cWaitIrq(pAC, IoC); +#endif + + /* stop all current transfer activity */ + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + if (pAC->GIni.GP[i].PState != SK_PRT_STOP && + pAC->GIni.GP[i].PState != SK_PRT_RESET) { + + SkGeStopPort(pAC, IoC, i, SK_STOP_ALL, SK_HARD_RST); + } + } + + /* Reset all bits in the PCI STATUS register */ + /* + * Note: PCI Cfg cycles cannot be used, because they are not + * available on some platforms after 'boot time'. + */ + SK_IN16(IoC, PCI_C(PCI_STATUS), &Word); + + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON); + SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS)); + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + + /* do the reset, all LEDs are switched off now */ + SK_OUT8(IoC, B0_CTST, CS_RST_SET); + + pAC->GIni.GILevel = SK_INIT_DATA; +} /* SkGeDeInit */ + + +/****************************************************************************** + * + * SkGeInitPort() Initialize the specified port. + * + * Description: + * PRxQSize, PXSQSize, and PXAQSize has to be + * configured for the specified port before calling this function. + * The descriptor rings has to be initialized too. + * + * o (Re)configure queues of the specified port. + * o configure the MAC of the specified port. + * o put ASIC and MAC(s) in operational mode. + * o initialize Rx/Tx and Sync LED + * o initialize RAM Buffers and MAC FIFOs + * + * The port is ready to connect when returning. + * + * Note: + * The MAC's Rx and Tx state machine is still disabled when returning. + * + * Returns: + * 0: success + * 1: Queue size initialization error. The configured values + * for PRxQSize, PXSQSize, or PXAQSize are invalid for one + * or more queues. The specified port was NOT initialized. + * An error log entry was generated. + * 2: The port has to be stopped before it can be initialized again. + */ +int SkGeInitPort( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port to configure */ +{ + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + + if (SkGeCheckQSize(pAC, Port) != 0) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E004, SKERR_HWI_E004MSG); + return(1); + } + + if (pPrt->PState == SK_PRT_INIT || pPrt->PState == SK_PRT_RUN) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E005, SKERR_HWI_E005MSG); + return(2); + } + + /* configuration ok, initialize the Port now */ + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* initialize Rx, Tx and Link LED */ + /* + * If 1000BT Phy needs LED initialization than swap + * LED and XMAC initialization order + */ + SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA); + SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_ENA); + /* The Link LED is initialized by RLMT or Diagnostics itself */ + + SkXmInitMac(pAC, IoC, Port); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + SkGmInitMac(pAC, IoC, Port); + } +#endif /* YUKON */ + + /* do NOT initialize the Link Sync Counter */ + + SkGeInitMacFifo(pAC, IoC, Port); + + SkGeInitRamBufs(pAC, IoC, Port); + + if (pPrt->PXSQSize != 0) { + /* enable Force Sync bit if synchronous queue available */ + SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_ENA_FSYNC); + } + + SkGeInitBmu(pAC, IoC, Port); + + /* mark port as initialized */ + pPrt->PState = SK_PRT_INIT; + + return(0); +} /* SkGeInitPort */ diff --git a/drivers/net/sk98lin/skgemib.c b/drivers/net/sk98lin/skgemib.c new file mode 100644 index 00000000000..0a6f67a7a39 --- /dev/null +++ b/drivers/net/sk98lin/skgemib.c @@ -0,0 +1,1075 @@ +/***************************************************************************** + * + * Name: skgemib.c + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.11 $ + * Date: $Date: 2003/09/15 13:38:12 $ + * Purpose: Private Network Management Interface Management Database + * + ****************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * PRIVATE OID handler function prototypes + */ +PNMI_STATIC int Addr(SK_AC *pAC, SK_IOC IoC, int action, + SK_U32 Id, char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int CsumStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int General(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int Mac8023Stat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int MacPrivateConf(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int MacPrivateStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int Monitor(SK_AC *pAC, SK_IOC IoC, int action, + SK_U32 Id, char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int OidStruct(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int Perform(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int* pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int Rlmt(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int RlmtStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int SensorStat(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int Vpd(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC int Vct(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); + +#ifdef SK_POWER_MGMT +PNMI_STATIC int PowerManagement(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +#endif /* SK_POWER_MGMT */ + +#ifdef SK_DIAG_SUPPORT +PNMI_STATIC int DiagActions(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, + unsigned int TableIndex, SK_U32 NetIndex); +#endif /* SK_DIAG_SUPPORT */ + + +/* defines *******************************************************************/ +#define ID_TABLE_SIZE (sizeof(IdTable)/sizeof(IdTable[0])) + + +/* global variables **********************************************************/ + +/* + * Table to correlate OID with handler function and index to + * hardware register stored in StatAddress if applicable. + */ +PNMI_STATIC const SK_PNMI_TAB_ENTRY IdTable[] = { + {OID_GEN_XMIT_OK, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX}, + {OID_GEN_RCV_OK, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX}, + {OID_GEN_XMIT_ERROR, + 0, + 0, + 0, + SK_PNMI_RO, General, 0}, + {OID_GEN_RCV_ERROR, + 0, + 0, + 0, + SK_PNMI_RO, General, 0}, + {OID_GEN_RCV_NO_BUFFER, + 0, + 0, + 0, + SK_PNMI_RO, General, 0}, + {OID_GEN_DIRECTED_FRAMES_XMIT, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_UNICAST}, + {OID_GEN_MULTICAST_FRAMES_XMIT, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_MULTICAST}, + {OID_GEN_BROADCAST_FRAMES_XMIT, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_BROADCAST}, + {OID_GEN_DIRECTED_FRAMES_RCV, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_UNICAST}, + {OID_GEN_MULTICAST_FRAMES_RCV, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_MULTICAST}, + {OID_GEN_BROADCAST_FRAMES_RCV, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_BROADCAST}, + {OID_GEN_RCV_CRC_ERROR, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_FCS}, + {OID_GEN_TRANSMIT_QUEUE_LENGTH, + 0, + 0, + 0, + SK_PNMI_RO, General, 0}, + {OID_802_3_PERMANENT_ADDRESS, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, 0}, + {OID_802_3_CURRENT_ADDRESS, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, 0}, + {OID_802_3_RCV_ERROR_ALIGNMENT, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_FRAMING}, + {OID_802_3_XMIT_ONE_COLLISION, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_SINGLE_COL}, + {OID_802_3_XMIT_MORE_COLLISIONS, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_MULTI_COL}, + {OID_802_3_XMIT_DEFERRED, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_DEFFERAL}, + {OID_802_3_XMIT_MAX_COLLISIONS, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_EXCESS_COL}, + {OID_802_3_RCV_OVERRUN, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HRX_OVERFLOW}, + {OID_802_3_XMIT_UNDERRUN, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_UNDERRUN}, + {OID_802_3_XMIT_TIMES_CRS_LOST, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_CARRIER}, + {OID_802_3_XMIT_LATE_COLLISIONS, + 0, + 0, + 0, + SK_PNMI_RO, Mac8023Stat, SK_PNMI_HTX_LATE_COL}, +#ifdef SK_POWER_MGMT + {OID_PNP_CAPABILITIES, + 0, + 0, + 0, + SK_PNMI_RO, PowerManagement, 0}, + {OID_PNP_SET_POWER, + 0, + 0, + 0, + SK_PNMI_WO, PowerManagement, 0}, + {OID_PNP_QUERY_POWER, + 0, + 0, + 0, + SK_PNMI_RO, PowerManagement, 0}, + {OID_PNP_ADD_WAKE_UP_PATTERN, + 0, + 0, + 0, + SK_PNMI_WO, PowerManagement, 0}, + {OID_PNP_REMOVE_WAKE_UP_PATTERN, + 0, + 0, + 0, + SK_PNMI_WO, PowerManagement, 0}, + {OID_PNP_ENABLE_WAKE_UP, + 0, + 0, + 0, + SK_PNMI_RW, PowerManagement, 0}, +#endif /* SK_POWER_MGMT */ +#ifdef SK_DIAG_SUPPORT + {OID_SKGE_DIAG_MODE, + 0, + 0, + 0, + SK_PNMI_RW, DiagActions, 0}, +#endif /* SK_DIAG_SUPPORT */ + {OID_SKGE_MDB_VERSION, + 1, + 0, + SK_PNMI_MAI_OFF(MgmtDBVersion), + SK_PNMI_RO, General, 0}, + {OID_SKGE_SUPPORTED_LIST, + 0, + 0, + 0, + SK_PNMI_RO, General, 0}, + {OID_SKGE_ALL_DATA, + 0, + 0, + 0, + SK_PNMI_RW, OidStruct, 0}, + {OID_SKGE_VPD_FREE_BYTES, + 1, + 0, + SK_PNMI_MAI_OFF(VpdFreeBytes), + SK_PNMI_RO, Vpd, 0}, + {OID_SKGE_VPD_ENTRIES_LIST, + 1, + 0, + SK_PNMI_MAI_OFF(VpdEntriesList), + SK_PNMI_RO, Vpd, 0}, + {OID_SKGE_VPD_ENTRIES_NUMBER, + 1, + 0, + SK_PNMI_MAI_OFF(VpdEntriesNumber), + SK_PNMI_RO, Vpd, 0}, + {OID_SKGE_VPD_KEY, + SK_PNMI_VPD_ENTRIES, + sizeof(SK_PNMI_VPD), + SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdKey), + SK_PNMI_RO, Vpd, 0}, + {OID_SKGE_VPD_VALUE, + SK_PNMI_VPD_ENTRIES, + sizeof(SK_PNMI_VPD), + SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdValue), + SK_PNMI_RO, Vpd, 0}, + {OID_SKGE_VPD_ACCESS, + SK_PNMI_VPD_ENTRIES, + sizeof(SK_PNMI_VPD), + SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdAccess), + SK_PNMI_RO, Vpd, 0}, + {OID_SKGE_VPD_ACTION, + SK_PNMI_VPD_ENTRIES, + sizeof(SK_PNMI_VPD), + SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdAction), + SK_PNMI_RW, Vpd, 0}, + {OID_SKGE_PORT_NUMBER, + 1, + 0, + SK_PNMI_MAI_OFF(PortNumber), + SK_PNMI_RO, General, 0}, + {OID_SKGE_DEVICE_TYPE, + 1, + 0, + SK_PNMI_MAI_OFF(DeviceType), + SK_PNMI_RO, General, 0}, + {OID_SKGE_DRIVER_DESCR, + 1, + 0, + SK_PNMI_MAI_OFF(DriverDescr), + SK_PNMI_RO, General, 0}, + {OID_SKGE_DRIVER_VERSION, + 1, + 0, + SK_PNMI_MAI_OFF(DriverVersion), + SK_PNMI_RO, General, 0}, + {OID_SKGE_DRIVER_RELDATE, + 1, + 0, + SK_PNMI_MAI_OFF(DriverReleaseDate), + SK_PNMI_RO, General, 0}, + {OID_SKGE_DRIVER_FILENAME, + 1, + 0, + SK_PNMI_MAI_OFF(DriverFileName), + SK_PNMI_RO, General, 0}, + {OID_SKGE_HW_DESCR, + 1, + 0, + SK_PNMI_MAI_OFF(HwDescr), + SK_PNMI_RO, General, 0}, + {OID_SKGE_HW_VERSION, + 1, + 0, + SK_PNMI_MAI_OFF(HwVersion), + SK_PNMI_RO, General, 0}, + {OID_SKGE_CHIPSET, + 1, + 0, + SK_PNMI_MAI_OFF(Chipset), + SK_PNMI_RO, General, 0}, + {OID_SKGE_CHIPID, + 1, + 0, + SK_PNMI_MAI_OFF(ChipId), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RAMSIZE, + 1, + 0, + SK_PNMI_MAI_OFF(RamSize), + SK_PNMI_RO, General, 0}, + {OID_SKGE_VAUXAVAIL, + 1, + 0, + SK_PNMI_MAI_OFF(VauxAvail), + SK_PNMI_RO, General, 0}, + {OID_SKGE_ACTION, + 1, + 0, + SK_PNMI_MAI_OFF(Action), + SK_PNMI_RW, Perform, 0}, + {OID_SKGE_RESULT, + 1, + 0, + SK_PNMI_MAI_OFF(TestResult), + SK_PNMI_RO, General, 0}, + {OID_SKGE_BUS_TYPE, + 1, + 0, + SK_PNMI_MAI_OFF(BusType), + SK_PNMI_RO, General, 0}, + {OID_SKGE_BUS_SPEED, + 1, + 0, + SK_PNMI_MAI_OFF(BusSpeed), + SK_PNMI_RO, General, 0}, + {OID_SKGE_BUS_WIDTH, + 1, + 0, + SK_PNMI_MAI_OFF(BusWidth), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TX_SW_QUEUE_LEN, + 1, + 0, + SK_PNMI_MAI_OFF(TxSwQueueLen), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TX_SW_QUEUE_MAX, + 1, + 0, + SK_PNMI_MAI_OFF(TxSwQueueMax), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TX_RETRY, + 1, + 0, + SK_PNMI_MAI_OFF(TxRetryCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RX_INTR_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(RxIntrCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TX_INTR_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(TxIntrCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RX_NO_BUF_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(RxNoBufCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TX_NO_BUF_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(TxNoBufCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TX_USED_DESCR_NO, + 1, + 0, + SK_PNMI_MAI_OFF(TxUsedDescrNo), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RX_DELIVERED_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(RxDeliveredCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RX_OCTETS_DELIV_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(RxOctetsDeliveredCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RX_HW_ERROR_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(RxHwErrorsCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TX_HW_ERROR_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(TxHwErrorsCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_IN_ERRORS_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(InErrorsCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_OUT_ERROR_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(OutErrorsCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_ERR_RECOVERY_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(ErrRecoveryCts), + SK_PNMI_RO, General, 0}, + {OID_SKGE_SYSUPTIME, + 1, + 0, + SK_PNMI_MAI_OFF(SysUpTime), + SK_PNMI_RO, General, 0}, + {OID_SKGE_SENSOR_NUMBER, + 1, + 0, + SK_PNMI_MAI_OFF(SensorNumber), + SK_PNMI_RO, General, 0}, + {OID_SKGE_SENSOR_INDEX, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorIndex), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_DESCR, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorDescr), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_TYPE, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorType), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_VALUE, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorValue), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_WAR_THRES_LOW, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningThresholdLow), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_WAR_THRES_UPP, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningThresholdHigh), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_ERR_THRES_LOW, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorThresholdLow), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_ERR_THRES_UPP, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorThresholdHigh), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_STATUS, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorStatus), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_WAR_CTS, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningCts), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_ERR_CTS, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorCts), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_WAR_TIME, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorWarningTimestamp), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_SENSOR_ERR_TIME, + SK_PNMI_SENSOR_ENTRIES, + sizeof(SK_PNMI_SENSOR), + SK_PNMI_OFF(Sensor) + SK_PNMI_SEN_OFF(SensorErrorTimestamp), + SK_PNMI_RO, SensorStat, 0}, + {OID_SKGE_CHKSM_NUMBER, + 1, + 0, + SK_PNMI_MAI_OFF(ChecksumNumber), + SK_PNMI_RO, General, 0}, + {OID_SKGE_CHKSM_RX_OK_CTS, + SKCS_NUM_PROTOCOLS, + sizeof(SK_PNMI_CHECKSUM), + SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxOkCts), + SK_PNMI_RO, CsumStat, 0}, + {OID_SKGE_CHKSM_RX_UNABLE_CTS, + SKCS_NUM_PROTOCOLS, + sizeof(SK_PNMI_CHECKSUM), + SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxUnableCts), + SK_PNMI_RO, CsumStat, 0}, + {OID_SKGE_CHKSM_RX_ERR_CTS, + SKCS_NUM_PROTOCOLS, + sizeof(SK_PNMI_CHECKSUM), + SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumRxErrCts), + SK_PNMI_RO, CsumStat, 0}, + {OID_SKGE_CHKSM_TX_OK_CTS, + SKCS_NUM_PROTOCOLS, + sizeof(SK_PNMI_CHECKSUM), + SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumTxOkCts), + SK_PNMI_RO, CsumStat, 0}, + {OID_SKGE_CHKSM_TX_UNABLE_CTS, + SKCS_NUM_PROTOCOLS, + sizeof(SK_PNMI_CHECKSUM), + SK_PNMI_OFF(Checksum) + SK_PNMI_CHK_OFF(ChecksumTxUnableCts), + SK_PNMI_RO, CsumStat, 0}, + {OID_SKGE_STAT_TX, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX}, + {OID_SKGE_STAT_TX_OCTETS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxOctetsOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_OCTET}, + {OID_SKGE_STAT_TX_BROADCAST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxBroadcastOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_BROADCAST}, + {OID_SKGE_STAT_TX_MULTICAST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMulticastOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MULTICAST}, + {OID_SKGE_STAT_TX_UNICAST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxUnicastOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_UNICAST}, + {OID_SKGE_STAT_TX_LONGFRAMES, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxLongFramesCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_LONGFRAMES}, + {OID_SKGE_STAT_TX_BURST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxBurstCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_BURST}, + {OID_SKGE_STAT_TX_PFLOWC, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxPauseMacCtrlCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_PMACC}, + {OID_SKGE_STAT_TX_FLOWC, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMacCtrlCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MACC}, + {OID_SKGE_STAT_TX_SINGLE_COL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSingleCollisionCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SINGLE_COL}, + {OID_SKGE_STAT_TX_MULTI_COL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMultipleCollisionCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MULTI_COL}, + {OID_SKGE_STAT_TX_EXCESS_COL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxExcessiveCollisionCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_EXCESS_COL}, + {OID_SKGE_STAT_TX_LATE_COL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxLateCollisionCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_LATE_COL}, + {OID_SKGE_STAT_TX_DEFFERAL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxDeferralCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_DEFFERAL}, + {OID_SKGE_STAT_TX_EXCESS_DEF, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxExcessiveDeferralCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_EXCESS_DEF}, + {OID_SKGE_STAT_TX_UNDERRUN, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxFifoUnderrunCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_UNDERRUN}, + {OID_SKGE_STAT_TX_CARRIER, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxCarrierCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_CARRIER}, +/* {OID_SKGE_STAT_TX_UTIL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxUtilization), + SK_PNMI_RO, MacPrivateStat, (SK_U16)(-1)}, */ + {OID_SKGE_STAT_TX_64, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx64Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_64}, + {OID_SKGE_STAT_TX_127, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx127Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_127}, + {OID_SKGE_STAT_TX_255, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx255Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_255}, + {OID_SKGE_STAT_TX_511, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx511Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_511}, + {OID_SKGE_STAT_TX_1023, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTx1023Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_1023}, + {OID_SKGE_STAT_TX_MAX, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxMaxCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_MAX}, + {OID_SKGE_STAT_TX_SYNC, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSyncCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SYNC}, + {OID_SKGE_STAT_TX_SYNC_OCTETS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatTxSyncOctetsCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HTX_SYNC_OCTET}, + {OID_SKGE_STAT_RX, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX}, + {OID_SKGE_STAT_RX_OCTETS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxOctetsOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_OCTET}, + {OID_SKGE_STAT_RX_BROADCAST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxBroadcastOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_BROADCAST}, + {OID_SKGE_STAT_RX_MULTICAST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMulticastOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MULTICAST}, + {OID_SKGE_STAT_RX_UNICAST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxUnicastOkCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_UNICAST}, + {OID_SKGE_STAT_RX_LONGFRAMES, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxLongFramesCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_LONGFRAMES}, + {OID_SKGE_STAT_RX_PFLOWC, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxPauseMacCtrlCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_PMACC}, + {OID_SKGE_STAT_RX_FLOWC, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMacCtrlCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MACC}, + {OID_SKGE_STAT_RX_PFLOWC_ERR, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxPauseMacCtrlErrorCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_PMACC_ERR}, + {OID_SKGE_STAT_RX_FLOWC_UNKWN, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMacCtrlUnknownCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MACC_UNKWN}, + {OID_SKGE_STAT_RX_BURST, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxBurstCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_BURST}, + {OID_SKGE_STAT_RX_MISSED, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMissedCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MISSED}, + {OID_SKGE_STAT_RX_FRAMING, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFramingCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_FRAMING}, + {OID_SKGE_STAT_RX_OVERFLOW, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFifoOverflowCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_OVERFLOW}, + {OID_SKGE_STAT_RX_JABBER, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxJabberCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_JABBER}, + {OID_SKGE_STAT_RX_CARRIER, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxCarrierCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_CARRIER}, + {OID_SKGE_STAT_RX_IR_LENGTH, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxIRLengthCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_IRLENGTH}, + {OID_SKGE_STAT_RX_SYMBOL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxSymbolCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_SYMBOL}, + {OID_SKGE_STAT_RX_SHORTS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxShortsCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_SHORTS}, + {OID_SKGE_STAT_RX_RUNT, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxRuntCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_RUNT}, + {OID_SKGE_STAT_RX_CEXT, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxCextCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_CEXT}, + {OID_SKGE_STAT_RX_TOO_LONG, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxTooLongCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_TOO_LONG}, + {OID_SKGE_STAT_RX_FCS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxFcsCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_FCS}, +/* {OID_SKGE_STAT_RX_UTIL, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxUtilization), + SK_PNMI_RO, MacPrivateStat, (SK_U16)(-1)}, */ + {OID_SKGE_STAT_RX_64, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx64Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_64}, + {OID_SKGE_STAT_RX_127, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx127Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_127}, + {OID_SKGE_STAT_RX_255, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx255Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_255}, + {OID_SKGE_STAT_RX_511, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx511Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_511}, + {OID_SKGE_STAT_RX_1023, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRx1023Cts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_1023}, + {OID_SKGE_STAT_RX_MAX, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_STAT), + SK_PNMI_OFF(Stat) + SK_PNMI_STA_OFF(StatRxMaxCts), + SK_PNMI_RO, MacPrivateStat, SK_PNMI_HRX_MAX}, + {OID_SKGE_PHYS_CUR_ADDR, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfMacCurrentAddr), + SK_PNMI_RW, Addr, 0}, + {OID_SKGE_PHYS_FAC_ADDR, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfMacFactoryAddr), + SK_PNMI_RO, Addr, 0}, + {OID_SKGE_PMD, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPMD), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_CONNECTOR, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfConnector), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_PHY_TYPE, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyType), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_LINK_CAP, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkCapability), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_LINK_MODE, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkMode), + SK_PNMI_RW, MacPrivateConf, 0}, + {OID_SKGE_LINK_MODE_STATUS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkModeStatus), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_LINK_STATUS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfLinkStatus), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_FLOWCTRL_CAP, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlCapability), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_FLOWCTRL_MODE, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlMode), + SK_PNMI_RW, MacPrivateConf, 0}, + {OID_SKGE_FLOWCTRL_STATUS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfFlowCtrlStatus), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_PHY_OPERATION_CAP, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationCapability), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_PHY_OPERATION_MODE, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationMode), + SK_PNMI_RW, MacPrivateConf, 0}, + {OID_SKGE_PHY_OPERATION_STATUS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfPhyOperationStatus), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_SPEED_CAP, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedCapability), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_SPEED_MODE, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedMode), + SK_PNMI_RW, MacPrivateConf, 0}, + {OID_SKGE_SPEED_STATUS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_CONF), + SK_PNMI_OFF(Conf) + SK_PNMI_CNF_OFF(ConfSpeedStatus), + SK_PNMI_RO, MacPrivateConf, 0}, + {OID_SKGE_TRAP, + 1, + 0, + SK_PNMI_MAI_OFF(Trap), + SK_PNMI_RO, General, 0}, + {OID_SKGE_TRAP_NUMBER, + 1, + 0, + SK_PNMI_MAI_OFF(TrapNumber), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RLMT_MODE, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtMode), + SK_PNMI_RW, Rlmt, 0}, + {OID_SKGE_RLMT_PORT_NUMBER, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtPortNumber), + SK_PNMI_RO, Rlmt, 0}, + {OID_SKGE_RLMT_PORT_ACTIVE, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtPortActive), + SK_PNMI_RO, Rlmt, 0}, + {OID_SKGE_RLMT_PORT_PREFERRED, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtPortPreferred), + SK_PNMI_RW, Rlmt, 0}, + {OID_SKGE_RLMT_CHANGE_CTS, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtChangeCts), + SK_PNMI_RO, Rlmt, 0}, + {OID_SKGE_RLMT_CHANGE_TIME, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtChangeTime), + SK_PNMI_RO, Rlmt, 0}, + {OID_SKGE_RLMT_CHANGE_ESTIM, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtChangeEstimate), + SK_PNMI_RO, Rlmt, 0}, + {OID_SKGE_RLMT_CHANGE_THRES, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtChangeThreshold), + SK_PNMI_RW, Rlmt, 0}, + {OID_SKGE_RLMT_PORT_INDEX, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_RLMT), + SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtIndex), + SK_PNMI_RO, RlmtStat, 0}, + {OID_SKGE_RLMT_STATUS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_RLMT), + SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtStatus), + SK_PNMI_RO, RlmtStat, 0}, + {OID_SKGE_RLMT_TX_HELLO_CTS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_RLMT), + SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtTxHelloCts), + SK_PNMI_RO, RlmtStat, 0}, + {OID_SKGE_RLMT_RX_HELLO_CTS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_RLMT), + SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtRxHelloCts), + SK_PNMI_RO, RlmtStat, 0}, + {OID_SKGE_RLMT_TX_SP_REQ_CTS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_RLMT), + SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtTxSpHelloReqCts), + SK_PNMI_RO, RlmtStat, 0}, + {OID_SKGE_RLMT_RX_SP_CTS, + SK_PNMI_MAC_ENTRIES, + sizeof(SK_PNMI_RLMT), + SK_PNMI_OFF(Rlmt) + SK_PNMI_RLM_OFF(RlmtRxSpHelloCts), + SK_PNMI_RO, RlmtStat, 0}, + {OID_SKGE_RLMT_MONITOR_NUMBER, + 1, + 0, + SK_PNMI_MAI_OFF(RlmtMonitorNumber), + SK_PNMI_RO, General, 0}, + {OID_SKGE_RLMT_MONITOR_INDEX, + SK_PNMI_MONITOR_ENTRIES, + sizeof(SK_PNMI_RLMT_MONITOR), + SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorIndex), + SK_PNMI_RO, Monitor, 0}, + {OID_SKGE_RLMT_MONITOR_ADDR, + SK_PNMI_MONITOR_ENTRIES, + sizeof(SK_PNMI_RLMT_MONITOR), + SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorAddr), + SK_PNMI_RO, Monitor, 0}, + {OID_SKGE_RLMT_MONITOR_ERRS, + SK_PNMI_MONITOR_ENTRIES, + sizeof(SK_PNMI_RLMT_MONITOR), + SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorErrorCts), + SK_PNMI_RO, Monitor, 0}, + {OID_SKGE_RLMT_MONITOR_TIMESTAMP, + SK_PNMI_MONITOR_ENTRIES, + sizeof(SK_PNMI_RLMT_MONITOR), + SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorTimestamp), + SK_PNMI_RO, Monitor, 0}, + {OID_SKGE_RLMT_MONITOR_ADMIN, + SK_PNMI_MONITOR_ENTRIES, + sizeof(SK_PNMI_RLMT_MONITOR), + SK_PNMI_OFF(RlmtMonitor) + SK_PNMI_MON_OFF(RlmtMonitorAdmin), + SK_PNMI_RW, Monitor, 0}, + {OID_SKGE_MTU, + 1, + 0, + SK_PNMI_MAI_OFF(MtuSize), + SK_PNMI_RW, MacPrivateConf, 0}, + {OID_SKGE_VCT_GET, + 0, + 0, + 0, + SK_PNMI_RO, Vct, 0}, + {OID_SKGE_VCT_SET, + 0, + 0, + 0, + SK_PNMI_WO, Vct, 0}, + {OID_SKGE_VCT_STATUS, + 0, + 0, + 0, + SK_PNMI_RO, Vct, 0}, + {OID_SKGE_BOARDLEVEL, + 0, + 0, + 0, + SK_PNMI_RO, General, 0}, +}; + diff --git a/drivers/net/sk98lin/skgepnmi.c b/drivers/net/sk98lin/skgepnmi.c new file mode 100644 index 00000000000..b36dd9ac6b2 --- /dev/null +++ b/drivers/net/sk98lin/skgepnmi.c @@ -0,0 +1,8210 @@ +/***************************************************************************** + * + * Name: skgepnmi.c + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.111 $ + * Date: $Date: 2003/09/15 13:35:35 $ + * Purpose: Private Network Management Interface + * + ****************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + + +#ifndef _lint +static const char SysKonnectFileId[] = + "@(#) $Id: skgepnmi.c,v 1.111 2003/09/15 13:35:35 tschilli Exp $ (C) Marvell."; +#endif /* !_lint */ + +#include "h/skdrv1st.h" +#include "h/sktypes.h" +#include "h/xmac_ii.h" +#include "h/skdebug.h" +#include "h/skqueue.h" +#include "h/skgepnmi.h" +#include "h/skgesirq.h" +#include "h/skcsum.h" +#include "h/skvpd.h" +#include "h/skgehw.h" +#include "h/skgeinit.h" +#include "h/skdrv2nd.h" +#include "h/skgepnm2.h" +#ifdef SK_POWER_MGMT +#include "h/skgepmgt.h" +#endif +/* defines *******************************************************************/ + +#ifndef DEBUG +#define PNMI_STATIC static +#else /* DEBUG */ +#define PNMI_STATIC +#endif /* DEBUG */ + +/* + * Public Function prototypes + */ +int SkPnmiInit(SK_AC *pAC, SK_IOC IoC, int level); +int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf, + unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); +int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, + unsigned int *pLen, SK_U32 NetIndex); +int SkPnmiPreSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, + unsigned int *pLen, SK_U32 NetIndex); +int SkPnmiSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, + unsigned int *pLen, SK_U32 NetIndex); +int SkPnmiEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Param); +int SkPnmiGenIoctl(SK_AC *pAC, SK_IOC IoC, void * pBuf, + unsigned int * pLen, SK_U32 NetIndex); + + +/* + * Private Function prototypes + */ + +PNMI_STATIC SK_U8 CalculateLinkModeStatus(SK_AC *pAC, SK_IOC IoC, unsigned int + PhysPortIndex); +PNMI_STATIC SK_U8 CalculateLinkStatus(SK_AC *pAC, SK_IOC IoC, unsigned int + PhysPortIndex); +PNMI_STATIC void CopyMac(char *pDst, SK_MAC_ADDR *pMac); +PNMI_STATIC void CopyTrapQueue(SK_AC *pAC, char *pDstBuf); +PNMI_STATIC SK_U64 GetPhysStatVal(SK_AC *pAC, SK_IOC IoC, + unsigned int PhysPortIndex, unsigned int StatIndex); +PNMI_STATIC SK_U64 GetStatVal(SK_AC *pAC, SK_IOC IoC, unsigned int LogPortIndex, + unsigned int StatIndex, SK_U32 NetIndex); +PNMI_STATIC char* GetTrapEntry(SK_AC *pAC, SK_U32 TrapId, unsigned int Size); +PNMI_STATIC void GetTrapQueueLen(SK_AC *pAC, unsigned int *pLen, + unsigned int *pEntries); +PNMI_STATIC int GetVpdKeyArr(SK_AC *pAC, SK_IOC IoC, char *pKeyArr, + unsigned int KeyArrLen, unsigned int *pKeyNo); +PNMI_STATIC int LookupId(SK_U32 Id); +PNMI_STATIC int MacUpdate(SK_AC *pAC, SK_IOC IoC, unsigned int FirstMac, + unsigned int LastMac); +PNMI_STATIC int PnmiStruct(SK_AC *pAC, SK_IOC IoC, int Action, char *pBuf, + unsigned int *pLen, SK_U32 NetIndex); +PNMI_STATIC int PnmiVar(SK_AC *pAC, SK_IOC IoC, int Action, SK_U32 Id, + char *pBuf, unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); +PNMI_STATIC void QueueRlmtNewMacTrap(SK_AC *pAC, unsigned int ActiveMac); +PNMI_STATIC void QueueRlmtPortTrap(SK_AC *pAC, SK_U32 TrapId, + unsigned int PortIndex); +PNMI_STATIC void QueueSensorTrap(SK_AC *pAC, SK_U32 TrapId, + unsigned int SensorIndex); +PNMI_STATIC void QueueSimpleTrap(SK_AC *pAC, SK_U32 TrapId); +PNMI_STATIC void ResetCounter(SK_AC *pAC, SK_IOC IoC, SK_U32 NetIndex); +PNMI_STATIC int RlmtUpdate(SK_AC *pAC, SK_IOC IoC, SK_U32 NetIndex); +PNMI_STATIC int SirqUpdate(SK_AC *pAC, SK_IOC IoC); +PNMI_STATIC void VirtualConf(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, char *pBuf); +PNMI_STATIC int Vct(SK_AC *pAC, SK_IOC IoC, int Action, SK_U32 Id, char *pBuf, + unsigned int *pLen, SK_U32 Instance, unsigned int TableIndex, SK_U32 NetIndex); +PNMI_STATIC void CheckVctStatus(SK_AC *, SK_IOC, char *, SK_U32, SK_U32); + +/* + * Table to correlate OID with handler function and index to + * hardware register stored in StatAddress if applicable. + */ +#include "skgemib.c" + +/* global variables **********************************************************/ + +/* + * Overflow status register bit table and corresponding counter + * dependent on MAC type - the number relates to the size of overflow + * mask returned by the pFnMacOverflow function + */ +PNMI_STATIC const SK_U16 StatOvrflwBit[][SK_PNMI_MAC_TYPES] = { +/* Bit0 */ { SK_PNMI_HTX, SK_PNMI_HTX_UNICAST}, +/* Bit1 */ { SK_PNMI_HTX_OCTETHIGH, SK_PNMI_HTX_BROADCAST}, +/* Bit2 */ { SK_PNMI_HTX_OCTETLOW, SK_PNMI_HTX_PMACC}, +/* Bit3 */ { SK_PNMI_HTX_BROADCAST, SK_PNMI_HTX_MULTICAST}, +/* Bit4 */ { SK_PNMI_HTX_MULTICAST, SK_PNMI_HTX_OCTETLOW}, +/* Bit5 */ { SK_PNMI_HTX_UNICAST, SK_PNMI_HTX_OCTETHIGH}, +/* Bit6 */ { SK_PNMI_HTX_LONGFRAMES, SK_PNMI_HTX_64}, +/* Bit7 */ { SK_PNMI_HTX_BURST, SK_PNMI_HTX_127}, +/* Bit8 */ { SK_PNMI_HTX_PMACC, SK_PNMI_HTX_255}, +/* Bit9 */ { SK_PNMI_HTX_MACC, SK_PNMI_HTX_511}, +/* Bit10 */ { SK_PNMI_HTX_SINGLE_COL, SK_PNMI_HTX_1023}, +/* Bit11 */ { SK_PNMI_HTX_MULTI_COL, SK_PNMI_HTX_MAX}, +/* Bit12 */ { SK_PNMI_HTX_EXCESS_COL, SK_PNMI_HTX_LONGFRAMES}, +/* Bit13 */ { SK_PNMI_HTX_LATE_COL, SK_PNMI_HTX_RESERVED}, +/* Bit14 */ { SK_PNMI_HTX_DEFFERAL, SK_PNMI_HTX_COL}, +/* Bit15 */ { SK_PNMI_HTX_EXCESS_DEF, SK_PNMI_HTX_LATE_COL}, +/* Bit16 */ { SK_PNMI_HTX_UNDERRUN, SK_PNMI_HTX_EXCESS_COL}, +/* Bit17 */ { SK_PNMI_HTX_CARRIER, SK_PNMI_HTX_MULTI_COL}, +/* Bit18 */ { SK_PNMI_HTX_UTILUNDER, SK_PNMI_HTX_SINGLE_COL}, +/* Bit19 */ { SK_PNMI_HTX_UTILOVER, SK_PNMI_HTX_UNDERRUN}, +/* Bit20 */ { SK_PNMI_HTX_64, SK_PNMI_HTX_RESERVED}, +/* Bit21 */ { SK_PNMI_HTX_127, SK_PNMI_HTX_RESERVED}, +/* Bit22 */ { SK_PNMI_HTX_255, SK_PNMI_HTX_RESERVED}, +/* Bit23 */ { SK_PNMI_HTX_511, SK_PNMI_HTX_RESERVED}, +/* Bit24 */ { SK_PNMI_HTX_1023, SK_PNMI_HTX_RESERVED}, +/* Bit25 */ { SK_PNMI_HTX_MAX, SK_PNMI_HTX_RESERVED}, +/* Bit26 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit27 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit28 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit29 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit30 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit31 */ { SK_PNMI_HTX_RESERVED, SK_PNMI_HTX_RESERVED}, +/* Bit32 */ { SK_PNMI_HRX, SK_PNMI_HRX_UNICAST}, +/* Bit33 */ { SK_PNMI_HRX_OCTETHIGH, SK_PNMI_HRX_BROADCAST}, +/* Bit34 */ { SK_PNMI_HRX_OCTETLOW, SK_PNMI_HRX_PMACC}, +/* Bit35 */ { SK_PNMI_HRX_BROADCAST, SK_PNMI_HRX_MULTICAST}, +/* Bit36 */ { SK_PNMI_HRX_MULTICAST, SK_PNMI_HRX_FCS}, +/* Bit37 */ { SK_PNMI_HRX_UNICAST, SK_PNMI_HRX_RESERVED}, +/* Bit38 */ { SK_PNMI_HRX_PMACC, SK_PNMI_HRX_OCTETLOW}, +/* Bit39 */ { SK_PNMI_HRX_MACC, SK_PNMI_HRX_OCTETHIGH}, +/* Bit40 */ { SK_PNMI_HRX_PMACC_ERR, SK_PNMI_HRX_BADOCTETLOW}, +/* Bit41 */ { SK_PNMI_HRX_MACC_UNKWN, SK_PNMI_HRX_BADOCTETHIGH}, +/* Bit42 */ { SK_PNMI_HRX_BURST, SK_PNMI_HRX_UNDERSIZE}, +/* Bit43 */ { SK_PNMI_HRX_MISSED, SK_PNMI_HRX_RUNT}, +/* Bit44 */ { SK_PNMI_HRX_FRAMING, SK_PNMI_HRX_64}, +/* Bit45 */ { SK_PNMI_HRX_OVERFLOW, SK_PNMI_HRX_127}, +/* Bit46 */ { SK_PNMI_HRX_JABBER, SK_PNMI_HRX_255}, +/* Bit47 */ { SK_PNMI_HRX_CARRIER, SK_PNMI_HRX_511}, +/* Bit48 */ { SK_PNMI_HRX_IRLENGTH, SK_PNMI_HRX_1023}, +/* Bit49 */ { SK_PNMI_HRX_SYMBOL, SK_PNMI_HRX_MAX}, +/* Bit50 */ { SK_PNMI_HRX_SHORTS, SK_PNMI_HRX_LONGFRAMES}, +/* Bit51 */ { SK_PNMI_HRX_RUNT, SK_PNMI_HRX_TOO_LONG}, +/* Bit52 */ { SK_PNMI_HRX_TOO_LONG, SK_PNMI_HRX_JABBER}, +/* Bit53 */ { SK_PNMI_HRX_FCS, SK_PNMI_HRX_RESERVED}, +/* Bit54 */ { SK_PNMI_HRX_RESERVED, SK_PNMI_HRX_OVERFLOW}, +/* Bit55 */ { SK_PNMI_HRX_CEXT, SK_PNMI_HRX_RESERVED}, +/* Bit56 */ { SK_PNMI_HRX_UTILUNDER, SK_PNMI_HRX_RESERVED}, +/* Bit57 */ { SK_PNMI_HRX_UTILOVER, SK_PNMI_HRX_RESERVED}, +/* Bit58 */ { SK_PNMI_HRX_64, SK_PNMI_HRX_RESERVED}, +/* Bit59 */ { SK_PNMI_HRX_127, SK_PNMI_HRX_RESERVED}, +/* Bit60 */ { SK_PNMI_HRX_255, SK_PNMI_HRX_RESERVED}, +/* Bit61 */ { SK_PNMI_HRX_511, SK_PNMI_HRX_RESERVED}, +/* Bit62 */ { SK_PNMI_HRX_1023, SK_PNMI_HRX_RESERVED}, +/* Bit63 */ { SK_PNMI_HRX_MAX, SK_PNMI_HRX_RESERVED} +}; + +/* + * Table for hardware register saving on resets and port switches + */ +PNMI_STATIC const SK_PNMI_STATADDR StatAddr[SK_PNMI_MAX_IDX][SK_PNMI_MAC_TYPES] = { + /* SK_PNMI_HTX */ + {{XM_TXF_OK, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_OCTETHIGH */ + {{XM_TXO_OK_HI, SK_TRUE}, {GM_TXO_OK_HI, SK_TRUE}}, + /* SK_PNMI_HTX_OCTETLOW */ + {{XM_TXO_OK_LO, SK_FALSE}, {GM_TXO_OK_LO, SK_FALSE}}, + /* SK_PNMI_HTX_BROADCAST */ + {{XM_TXF_BC_OK, SK_TRUE}, {GM_TXF_BC_OK, SK_TRUE}}, + /* SK_PNMI_HTX_MULTICAST */ + {{XM_TXF_MC_OK, SK_TRUE}, {GM_TXF_MC_OK, SK_TRUE}}, + /* SK_PNMI_HTX_UNICAST */ + {{XM_TXF_UC_OK, SK_TRUE}, {GM_TXF_UC_OK, SK_TRUE}}, + /* SK_PNMI_HTX_BURST */ + {{XM_TXE_BURST, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_PMACC */ + {{XM_TXF_MPAUSE, SK_TRUE}, {GM_TXF_MPAUSE, SK_TRUE}}, + /* SK_PNMI_HTX_MACC */ + {{XM_TXF_MCTRL, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_COL */ + {{0, SK_FALSE}, {GM_TXF_COL, SK_TRUE}}, + /* SK_PNMI_HTX_SINGLE_COL */ + {{XM_TXF_SNG_COL, SK_TRUE}, {GM_TXF_SNG_COL, SK_TRUE}}, + /* SK_PNMI_HTX_MULTI_COL */ + {{XM_TXF_MUL_COL, SK_TRUE}, {GM_TXF_MUL_COL, SK_TRUE}}, + /* SK_PNMI_HTX_EXCESS_COL */ + {{XM_TXF_ABO_COL, SK_TRUE}, {GM_TXF_ABO_COL, SK_TRUE}}, + /* SK_PNMI_HTX_LATE_COL */ + {{XM_TXF_LAT_COL, SK_TRUE}, {GM_TXF_LAT_COL, SK_TRUE}}, + /* SK_PNMI_HTX_DEFFERAL */ + {{XM_TXF_DEF, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_EXCESS_DEF */ + {{XM_TXF_EX_DEF, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_UNDERRUN */ + {{XM_TXE_FIFO_UR, SK_TRUE}, {GM_TXE_FIFO_UR, SK_TRUE}}, + /* SK_PNMI_HTX_CARRIER */ + {{XM_TXE_CS_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_UTILUNDER */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_UTILOVER */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_64 */ + {{XM_TXF_64B, SK_TRUE}, {GM_TXF_64B, SK_TRUE}}, + /* SK_PNMI_HTX_127 */ + {{XM_TXF_127B, SK_TRUE}, {GM_TXF_127B, SK_TRUE}}, + /* SK_PNMI_HTX_255 */ + {{XM_TXF_255B, SK_TRUE}, {GM_TXF_255B, SK_TRUE}}, + /* SK_PNMI_HTX_511 */ + {{XM_TXF_511B, SK_TRUE}, {GM_TXF_511B, SK_TRUE}}, + /* SK_PNMI_HTX_1023 */ + {{XM_TXF_1023B, SK_TRUE}, {GM_TXF_1023B, SK_TRUE}}, + /* SK_PNMI_HTX_MAX */ + {{XM_TXF_MAX_SZ, SK_TRUE}, {GM_TXF_1518B, SK_TRUE}}, + /* SK_PNMI_HTX_LONGFRAMES */ + {{XM_TXF_LONG, SK_TRUE}, {GM_TXF_MAX_SZ, SK_TRUE}}, + /* SK_PNMI_HTX_SYNC */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_SYNC_OCTET */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HTX_RESERVED */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX */ + {{XM_RXF_OK, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_OCTETHIGH */ + {{XM_RXO_OK_HI, SK_TRUE}, {GM_RXO_OK_HI, SK_TRUE}}, + /* SK_PNMI_HRX_OCTETLOW */ + {{XM_RXO_OK_LO, SK_FALSE}, {GM_RXO_OK_LO, SK_FALSE}}, + /* SK_PNMI_HRX_BADOCTETHIGH */ + {{0, SK_FALSE}, {GM_RXO_ERR_HI, SK_TRUE}}, + /* SK_PNMI_HRX_BADOCTETLOW */ + {{0, SK_FALSE}, {GM_RXO_ERR_LO, SK_TRUE}}, + /* SK_PNMI_HRX_BROADCAST */ + {{XM_RXF_BC_OK, SK_TRUE}, {GM_RXF_BC_OK, SK_TRUE}}, + /* SK_PNMI_HRX_MULTICAST */ + {{XM_RXF_MC_OK, SK_TRUE}, {GM_RXF_MC_OK, SK_TRUE}}, + /* SK_PNMI_HRX_UNICAST */ + {{XM_RXF_UC_OK, SK_TRUE}, {GM_RXF_UC_OK, SK_TRUE}}, + /* SK_PNMI_HRX_PMACC */ + {{XM_RXF_MPAUSE, SK_TRUE}, {GM_RXF_MPAUSE, SK_TRUE}}, + /* SK_PNMI_HRX_MACC */ + {{XM_RXF_MCTRL, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_PMACC_ERR */ + {{XM_RXF_INV_MP, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_MACC_UNKWN */ + {{XM_RXF_INV_MOC, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_BURST */ + {{XM_RXE_BURST, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_MISSED */ + {{XM_RXE_FMISS, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_FRAMING */ + {{XM_RXF_FRA_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_UNDERSIZE */ + {{0, SK_FALSE}, {GM_RXF_SHT, SK_TRUE}}, + /* SK_PNMI_HRX_OVERFLOW */ + {{XM_RXE_FIFO_OV, SK_TRUE}, {GM_RXE_FIFO_OV, SK_TRUE}}, + /* SK_PNMI_HRX_JABBER */ + {{XM_RXF_JAB_PKT, SK_TRUE}, {GM_RXF_JAB_PKT, SK_TRUE}}, + /* SK_PNMI_HRX_CARRIER */ + {{XM_RXE_CAR_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_IRLENGTH */ + {{XM_RXF_LEN_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_SYMBOL */ + {{XM_RXE_SYM_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_SHORTS */ + {{XM_RXE_SHT_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_RUNT */ + {{XM_RXE_RUNT, SK_TRUE}, {GM_RXE_FRAG, SK_TRUE}}, + /* SK_PNMI_HRX_TOO_LONG */ + {{XM_RXF_LNG_ERR, SK_TRUE}, {GM_RXF_LNG_ERR, SK_TRUE}}, + /* SK_PNMI_HRX_FCS */ + {{XM_RXF_FCS_ERR, SK_TRUE}, {GM_RXF_FCS_ERR, SK_TRUE}}, + /* SK_PNMI_HRX_CEXT */ + {{XM_RXF_CEX_ERR, SK_TRUE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_UTILUNDER */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_UTILOVER */ + {{0, SK_FALSE}, {0, SK_FALSE}}, + /* SK_PNMI_HRX_64 */ + {{XM_RXF_64B, SK_TRUE}, {GM_RXF_64B, SK_TRUE}}, + /* SK_PNMI_HRX_127 */ + {{XM_RXF_127B, SK_TRUE}, {GM_RXF_127B, SK_TRUE}}, + /* SK_PNMI_HRX_255 */ + {{XM_RXF_255B, SK_TRUE}, {GM_RXF_255B, SK_TRUE}}, + /* SK_PNMI_HRX_511 */ + {{XM_RXF_511B, SK_TRUE}, {GM_RXF_511B, SK_TRUE}}, + /* SK_PNMI_HRX_1023 */ + {{XM_RXF_1023B, SK_TRUE}, {GM_RXF_1023B, SK_TRUE}}, + /* SK_PNMI_HRX_MAX */ + {{XM_RXF_MAX_SZ, SK_TRUE}, {GM_RXF_1518B, SK_TRUE}}, + /* SK_PNMI_HRX_LONGFRAMES */ + {{0, SK_FALSE}, {GM_RXF_MAX_SZ, SK_TRUE}}, + /* SK_PNMI_HRX_RESERVED */ + {{0, SK_FALSE}, {0, SK_FALSE}} +}; + + +/***************************************************************************** + * + * Public functions + * + */ + +/***************************************************************************** + * + * SkPnmiInit - Init function of PNMI + * + * Description: + * SK_INIT_DATA: Initialises the data structures + * SK_INIT_IO: Resets the XMAC statistics, determines the device and + * connector type. + * SK_INIT_RUN: Starts a timer event for port switch per hour + * calculation. + * + * Returns: + * Always 0 + */ +int SkPnmiInit( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Level) /* Initialization level */ +{ + unsigned int PortMax; /* Number of ports */ + unsigned int PortIndex; /* Current port index in loop */ + SK_U16 Val16; /* Multiple purpose 16 bit variable */ + SK_U8 Val8; /* Mulitple purpose 8 bit variable */ + SK_EVPARA EventParam; /* Event struct for timer event */ + SK_PNMI_VCT *pVctBackupData; + + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiInit: Called, level=%d\n", Level)); + + switch (Level) { + + case SK_INIT_DATA: + SK_MEMSET((char *)&pAC->Pnmi, 0, sizeof(pAC->Pnmi)); + pAC->Pnmi.TrapBufFree = SK_PNMI_TRAP_QUEUE_LEN; + pAC->Pnmi.StartUpTime = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); + pAC->Pnmi.RlmtChangeThreshold = SK_PNMI_DEF_RLMT_CHG_THRES; + for (PortIndex = 0; PortIndex < SK_MAX_MACS; PortIndex ++) { + + pAC->Pnmi.Port[PortIndex].ActiveFlag = SK_FALSE; + pAC->Pnmi.DualNetActiveFlag = SK_FALSE; + } + +#ifdef SK_PNMI_CHECK + if (SK_PNMI_MAX_IDX != SK_PNMI_CNT_NO) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR049, SK_PNMI_ERR049MSG); + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_INIT | SK_DBGCAT_FATAL, + ("CounterOffset struct size (%d) differs from" + "SK_PNMI_MAX_IDX (%d)\n", + SK_PNMI_CNT_NO, SK_PNMI_MAX_IDX)); + } + + if (SK_PNMI_MAX_IDX != + (sizeof(StatAddr) / (sizeof(SK_PNMI_STATADDR) * SK_PNMI_MAC_TYPES))) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR050, SK_PNMI_ERR050MSG); + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_INIT | SK_DBGCAT_FATAL, + ("StatAddr table size (%d) differs from " + "SK_PNMI_MAX_IDX (%d)\n", + (sizeof(StatAddr) / + (sizeof(SK_PNMI_STATADDR) * SK_PNMI_MAC_TYPES)), + SK_PNMI_MAX_IDX)); + } +#endif /* SK_PNMI_CHECK */ + break; + + case SK_INIT_IO: + /* + * Reset MAC counters + */ + PortMax = pAC->GIni.GIMacsFound; + + for (PortIndex = 0; PortIndex < PortMax; PortIndex ++) { + + pAC->GIni.GIFunc.pFnMacResetCounter(pAC, IoC, PortIndex); + } + + /* Initialize DSP variables for Vct() to 0xff => Never written! */ + for (PortIndex = 0; PortIndex < PortMax; PortIndex ++) { + pAC->GIni.GP[PortIndex].PCableLen = 0xff; + pVctBackupData = &pAC->Pnmi.VctBackup[PortIndex]; + pVctBackupData->PCableLen = 0xff; + } + + /* + * Get pci bus speed + */ + SK_IN16(IoC, B0_CTST, &Val16); + if ((Val16 & CS_BUS_CLOCK) == 0) { + + pAC->Pnmi.PciBusSpeed = 33; + } + else { + pAC->Pnmi.PciBusSpeed = 66; + } + + /* + * Get pci bus width + */ + SK_IN16(IoC, B0_CTST, &Val16); + if ((Val16 & CS_BUS_SLOT_SZ) == 0) { + + pAC->Pnmi.PciBusWidth = 32; + } + else { + pAC->Pnmi.PciBusWidth = 64; + } + + /* + * Get chipset + */ + switch (pAC->GIni.GIChipId) { + case CHIP_ID_GENESIS: + pAC->Pnmi.Chipset = SK_PNMI_CHIPSET_XMAC; + break; + + case CHIP_ID_YUKON: + pAC->Pnmi.Chipset = SK_PNMI_CHIPSET_YUKON; + break; + + default: + break; + } + + /* + * Get PMD and DeviceType + */ + SK_IN8(IoC, B2_PMD_TYP, &Val8); + switch (Val8) { + case 'S': + pAC->Pnmi.PMD = 3; + if (pAC->GIni.GIMacsFound > 1) { + + pAC->Pnmi.DeviceType = 0x00020002; + } + else { + pAC->Pnmi.DeviceType = 0x00020001; + } + break; + + case 'L': + pAC->Pnmi.PMD = 2; + if (pAC->GIni.GIMacsFound > 1) { + + pAC->Pnmi.DeviceType = 0x00020004; + } + else { + pAC->Pnmi.DeviceType = 0x00020003; + } + break; + + case 'C': + pAC->Pnmi.PMD = 4; + if (pAC->GIni.GIMacsFound > 1) { + + pAC->Pnmi.DeviceType = 0x00020006; + } + else { + pAC->Pnmi.DeviceType = 0x00020005; + } + break; + + case 'T': + pAC->Pnmi.PMD = 5; + if (pAC->GIni.GIMacsFound > 1) { + + pAC->Pnmi.DeviceType = 0x00020008; + } + else { + pAC->Pnmi.DeviceType = 0x00020007; + } + break; + + default : + pAC->Pnmi.PMD = 1; + pAC->Pnmi.DeviceType = 0; + break; + } + + /* + * Get connector + */ + SK_IN8(IoC, B2_CONN_TYP, &Val8); + switch (Val8) { + case 'C': + pAC->Pnmi.Connector = 2; + break; + + case 'D': + pAC->Pnmi.Connector = 3; + break; + + case 'F': + pAC->Pnmi.Connector = 4; + break; + + case 'J': + pAC->Pnmi.Connector = 5; + break; + + case 'V': + pAC->Pnmi.Connector = 6; + break; + + default: + pAC->Pnmi.Connector = 1; + break; + } + break; + + case SK_INIT_RUN: + /* + * Start timer for RLMT change counter + */ + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + SkTimerStart(pAC, IoC, &pAC->Pnmi.RlmtChangeEstimate.EstTimer, + 28125000, SKGE_PNMI, SK_PNMI_EVT_CHG_EST_TIMER, + EventParam); + break; + + default: + break; /* Nothing todo */ + } + + return (0); +} + +/***************************************************************************** + * + * SkPnmiGetVar - Retrieves the value of a single OID + * + * Description: + * Calls a general sub-function for all this stuff. If the instance + * -1 is passed, the values of all instances are returned in an + * array of values. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed + * SK_PNMI_ERR_GENERAL A general severe internal error occured + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take + * the data. + * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +static int SkPnmiGetVar( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 Id, /* Object ID that is to be processed */ +void *pBuf, /* Buffer to which the management data will be copied */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiGetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n", + Id, *pLen, Instance, NetIndex)); + + return (PnmiVar(pAC, IoC, SK_PNMI_GET, Id, (char *)pBuf, pLen, + Instance, NetIndex)); +} + +/***************************************************************************** + * + * SkPnmiPreSetVar - Presets the value of a single OID + * + * Description: + * Calls a general sub-function for all this stuff. The preset does + * the same as a set, but returns just before finally setting the + * new value. This is useful to check if a set might be successfull. + * If the instance -1 is passed, an array of values is supposed and + * all instances of the OID will be set. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +static int SkPnmiPreSetVar( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 Id, /* Object ID that is to be processed */ +void *pBuf, /* Buffer to which the management data will be copied */ +unsigned int *pLen, /* Total length of management data */ +SK_U32 Instance, /* Instance (1..n) that is to be set or -1 */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiPreSetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n", + Id, *pLen, Instance, NetIndex)); + + + return (PnmiVar(pAC, IoC, SK_PNMI_PRESET, Id, (char *)pBuf, pLen, + Instance, NetIndex)); +} + +/***************************************************************************** + * + * SkPnmiSetVar - Sets the value of a single OID + * + * Description: + * Calls a general sub-function for all this stuff. The preset does + * the same as a set, but returns just before finally setting the + * new value. This is useful to check if a set might be successfull. + * If the instance -1 is passed, an array of values is supposed and + * all instances of the OID will be set. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +int SkPnmiSetVar( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 Id, /* Object ID that is to be processed */ +void *pBuf, /* Buffer to which the management data will be copied */ +unsigned int *pLen, /* Total length of management data */ +SK_U32 Instance, /* Instance (1..n) that is to be set or -1 */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiSetVar: Called, Id=0x%x, BufLen=%d, Instance=%d, NetIndex=%d\n", + Id, *pLen, Instance, NetIndex)); + + return (PnmiVar(pAC, IoC, SK_PNMI_SET, Id, (char *)pBuf, pLen, + Instance, NetIndex)); +} + +/***************************************************************************** + * + * SkPnmiGetStruct - Retrieves the management database in SK_PNMI_STRUCT_DATA + * + * Description: + * Runs through the IdTable, queries the single OIDs and stores the + * returned data into the management database structure + * SK_PNMI_STRUCT_DATA. The offset of the OID in the structure + * is stored in the IdTable. The return value of the function will also + * be stored in SK_PNMI_STRUCT_DATA if the passed buffer has the + * minimum size of SK_PNMI_MIN_STRUCT_SIZE. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed + * SK_PNMI_ERR_GENERAL A general severe internal error occured + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take + * the data. + * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist + */ +int SkPnmiGetStruct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +void *pBuf, /* Buffer to which the management data will be copied. */ +unsigned int *pLen, /* Length of buffer */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + int Ret; + unsigned int TableIndex; + unsigned int DstOffset; + unsigned int InstanceNo; + unsigned int InstanceCnt; + SK_U32 Instance; + unsigned int TmpLen; + char KeyArr[SK_PNMI_VPD_ENTRIES][SK_PNMI_VPD_KEY_SIZE]; + + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiGetStruct: Called, BufLen=%d, NetIndex=%d\n", + *pLen, NetIndex)); + + if (*pLen < SK_PNMI_STRUCT_SIZE) { + + if (*pLen >= SK_PNMI_MIN_STRUCT_SIZE) { + + SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_TOO_SHORT, + (SK_U32)(-1)); + } + + *pLen = SK_PNMI_STRUCT_SIZE; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Check NetIndex + */ + if (NetIndex >= pAC->Rlmt.NumNets) { + return (SK_PNMI_ERR_UNKNOWN_NET); + } + + /* Update statistic */ + SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On call"); + + if ((Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1)) != + SK_PNMI_ERR_OK) { + + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + + if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { + + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + + if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) { + + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + + /* + * Increment semaphores to indicate that an update was + * already done + */ + pAC->Pnmi.MacUpdatedFlag ++; + pAC->Pnmi.RlmtUpdatedFlag ++; + pAC->Pnmi.SirqUpdatedFlag ++; + + /* Get vpd keys for instance calculation */ + Ret = GetVpdKeyArr(pAC, IoC, &KeyArr[0][0], sizeof(KeyArr), &TmpLen); + if (Ret != SK_PNMI_ERR_OK) { + + pAC->Pnmi.MacUpdatedFlag --; + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return"); + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (SK_PNMI_ERR_GENERAL); + } + + /* Retrieve values */ + SK_MEMSET((char *)pBuf, 0, SK_PNMI_STRUCT_SIZE); + for (TableIndex = 0; TableIndex < ID_TABLE_SIZE; TableIndex ++) { + + InstanceNo = IdTable[TableIndex].InstanceNo; + for (InstanceCnt = 1; InstanceCnt <= InstanceNo; + InstanceCnt ++) { + + DstOffset = IdTable[TableIndex].Offset + + (InstanceCnt - 1) * + IdTable[TableIndex].StructSize; + + /* + * For the VPD the instance is not an index number + * but the key itself. Determin with the instance + * counter the VPD key to be used. + */ + if (IdTable[TableIndex].Id == OID_SKGE_VPD_KEY || + IdTable[TableIndex].Id == OID_SKGE_VPD_VALUE || + IdTable[TableIndex].Id == OID_SKGE_VPD_ACCESS || + IdTable[TableIndex].Id == OID_SKGE_VPD_ACTION) { + + SK_STRNCPY((char *)&Instance, KeyArr[InstanceCnt - 1], 4); + } + else { + Instance = (SK_U32)InstanceCnt; + } + + TmpLen = *pLen - DstOffset; + Ret = IdTable[TableIndex].Func(pAC, IoC, SK_PNMI_GET, + IdTable[TableIndex].Id, (char *)pBuf + + DstOffset, &TmpLen, Instance, TableIndex, NetIndex); + + /* + * An unknown instance error means that we reached + * the last instance of that variable. Proceed with + * the next OID in the table and ignore the return + * code. + */ + if (Ret == SK_PNMI_ERR_UNKNOWN_INST) { + + break; + } + + if (Ret != SK_PNMI_ERR_OK) { + + pAC->Pnmi.MacUpdatedFlag --; + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return"); + SK_PNMI_SET_STAT(pBuf, Ret, DstOffset); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + } + } + + pAC->Pnmi.MacUpdatedFlag --; + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + *pLen = SK_PNMI_STRUCT_SIZE; + SK_PNMI_CHECKFLAGS("SkPnmiGetStruct: On return"); + SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_OK, (SK_U32)(-1)); + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * SkPnmiPreSetStruct - Presets the management database in SK_PNMI_STRUCT_DATA + * + * Description: + * Calls a general sub-function for all this set stuff. The preset does + * the same as a set, but returns just before finally setting the + * new value. This is useful to check if a set might be successfull. + * The sub-function runs through the IdTable, checks which OIDs are able + * to set, and calls the handler function of the OID to perform the + * preset. The return value of the function will also be stored in + * SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of + * SK_PNMI_MIN_STRUCT_SIZE. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + */ +int SkPnmiPreSetStruct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +void *pBuf, /* Buffer which contains the data to be set */ +unsigned int *pLen, /* Length of buffer */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiPreSetStruct: Called, BufLen=%d, NetIndex=%d\n", + *pLen, NetIndex)); + + return (PnmiStruct(pAC, IoC, SK_PNMI_PRESET, (char *)pBuf, + pLen, NetIndex)); +} + +/***************************************************************************** + * + * SkPnmiSetStruct - Sets the management database in SK_PNMI_STRUCT_DATA + * + * Description: + * Calls a general sub-function for all this set stuff. The return value + * of the function will also be stored in SK_PNMI_STRUCT_DATA if the + * passed buffer has the minimum size of SK_PNMI_MIN_STRUCT_SIZE. + * The sub-function runs through the IdTable, checks which OIDs are able + * to set, and calls the handler function of the OID to perform the + * set. The return value of the function will also be stored in + * SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of + * SK_PNMI_MIN_STRUCT_SIZE. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + */ +int SkPnmiSetStruct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +void *pBuf, /* Buffer which contains the data to be set */ +unsigned int *pLen, /* Length of buffer */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiSetStruct: Called, BufLen=%d, NetIndex=%d\n", + *pLen, NetIndex)); + + return (PnmiStruct(pAC, IoC, SK_PNMI_SET, (char *)pBuf, + pLen, NetIndex)); +} + +/***************************************************************************** + * + * SkPnmiEvent - Event handler + * + * Description: + * Handles the following events: + * SK_PNMI_EVT_SIRQ_OVERFLOW When a hardware counter overflows an + * interrupt will be generated which is + * first handled by SIRQ which generates a + * this event. The event increments the + * upper 32 bit of the 64 bit counter. + * SK_PNMI_EVT_SEN_XXX The event is generated by the I2C module + * when a sensor reports a warning or + * error. The event will store a trap + * message in the trap buffer. + * SK_PNMI_EVT_CHG_EST_TIMER The timer event was initiated by this + * module and is used to calculate the + * port switches per hour. + * SK_PNMI_EVT_CLEAR_COUNTER The event clears all counters and + * timestamps. + * SK_PNMI_EVT_XMAC_RESET The event is generated by the driver + * before a hard reset of the XMAC is + * performed. All counters will be saved + * and added to the hardware counter + * values after reset to grant continuous + * counter values. + * SK_PNMI_EVT_RLMT_PORT_UP Generated by RLMT to notify that a port + * went logically up. A trap message will + * be stored to the trap buffer. + * SK_PNMI_EVT_RLMT_PORT_DOWN Generated by RLMT to notify that a port + * went logically down. A trap message will + * be stored to the trap buffer. + * SK_PNMI_EVT_RLMT_SEGMENTATION Generated by RLMT to notify that two + * spanning tree root bridges were + * detected. A trap message will be stored + * to the trap buffer. + * SK_PNMI_EVT_RLMT_ACTIVE_DOWN Notifies PNMI that an active port went + * down. PNMI will not further add the + * statistic values to the virtual port. + * SK_PNMI_EVT_RLMT_ACTIVE_UP Notifies PNMI that a port went up and + * is now an active port. PNMI will now + * add the statistic data of this port to + * the virtual port. + * SK_PNMI_EVT_RLMT_SET_NETS Notifies PNMI about the net mode. The first parameter + * contains the number of nets. 1 means single net, 2 means + * dual net. The second parameter is -1 + * + * Returns: + * Always 0 + */ +int SkPnmiEvent( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 Event, /* Event-Id */ +SK_EVPARA Param) /* Event dependent parameter */ +{ + unsigned int PhysPortIndex; + unsigned int MaxNetNumber; + int CounterIndex; + int Ret; + SK_U16 MacStatus; + SK_U64 OverflowStatus; + SK_U64 Mask; + int MacType; + SK_U64 Value; + SK_U32 Val32; + SK_U16 Register; + SK_EVPARA EventParam; + SK_U64 NewestValue; + SK_U64 OldestValue; + SK_U64 Delta; + SK_PNMI_ESTIMATE *pEst; + SK_U32 NetIndex; + SK_GEPORT *pPrt; + SK_PNMI_VCT *pVctBackupData; + SK_U32 RetCode; + int i; + SK_U32 CableLength; + + +#ifdef DEBUG + if (Event != SK_PNMI_EVT_XMAC_RESET) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: SkPnmiEvent: Called, Event=0x%x, Param=0x%x\n", + (unsigned int)Event, (unsigned int)Param.Para64)); + } +#endif /* DEBUG */ + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On call"); + + MacType = pAC->GIni.GIMacType; + + switch (Event) { + + case SK_PNMI_EVT_SIRQ_OVERFLOW: + PhysPortIndex = (int)Param.Para32[0]; + MacStatus = (SK_U16)Param.Para32[1]; +#ifdef DEBUG + if (PhysPortIndex >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SIRQ_OVERFLOW parameter" + " wrong, PhysPortIndex=0x%x\n", + PhysPortIndex)); + return (0); + } +#endif /* DEBUG */ + OverflowStatus = 0; + + /* + * Check which source caused an overflow interrupt. + */ + if ((pAC->GIni.GIFunc.pFnMacOverflow(pAC, IoC, PhysPortIndex, + MacStatus, &OverflowStatus) != 0) || + (OverflowStatus == 0)) { + + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); + return (0); + } + + /* + * Check the overflow status register and increment + * the upper dword of corresponding counter. + */ + for (CounterIndex = 0; CounterIndex < sizeof(Mask) * 8; + CounterIndex ++) { + + Mask = (SK_U64)1 << CounterIndex; + if ((OverflowStatus & Mask) == 0) { + + continue; + } + + switch (StatOvrflwBit[CounterIndex][MacType]) { + + case SK_PNMI_HTX_UTILUNDER: + case SK_PNMI_HTX_UTILOVER: + if (MacType == SK_MAC_XMAC) { + XM_IN16(IoC, PhysPortIndex, XM_TX_CMD, &Register); + Register |= XM_TX_SAM_LINE; + XM_OUT16(IoC, PhysPortIndex, XM_TX_CMD, Register); + } + break; + + case SK_PNMI_HRX_UTILUNDER: + case SK_PNMI_HRX_UTILOVER: + if (MacType == SK_MAC_XMAC) { + XM_IN16(IoC, PhysPortIndex, XM_RX_CMD, &Register); + Register |= XM_RX_SAM_LINE; + XM_OUT16(IoC, PhysPortIndex, XM_RX_CMD, Register); + } + break; + + case SK_PNMI_HTX_OCTETHIGH: + case SK_PNMI_HTX_OCTETLOW: + case SK_PNMI_HTX_RESERVED: + case SK_PNMI_HRX_OCTETHIGH: + case SK_PNMI_HRX_OCTETLOW: + case SK_PNMI_HRX_IRLENGTH: + case SK_PNMI_HRX_RESERVED: + + /* + * the following counters aren't be handled (id > 63) + */ + case SK_PNMI_HTX_SYNC: + case SK_PNMI_HTX_SYNC_OCTET: + break; + + case SK_PNMI_HRX_LONGFRAMES: + if (MacType == SK_MAC_GMAC) { + pAC->Pnmi.Port[PhysPortIndex]. + CounterHigh[CounterIndex] ++; + } + break; + + default: + pAC->Pnmi.Port[PhysPortIndex]. + CounterHigh[CounterIndex] ++; + } + } + break; + + case SK_PNMI_EVT_SEN_WAR_LOW: +#ifdef DEBUG + if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_WAR_LOW parameter wrong, SensorIndex=%d\n", + (unsigned int)Param.Para64)); + return (0); + } +#endif /* DEBUG */ + + /* + * Store a trap message in the trap buffer and generate + * an event for user space applications with the + * SK_DRIVER_SENDEVENT macro. + */ + QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_WAR_LOW, + (unsigned int)Param.Para64); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + break; + + case SK_PNMI_EVT_SEN_WAR_UPP: +#ifdef DEBUG + if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_WAR_UPP parameter wrong, SensorIndex=%d\n", + (unsigned int)Param.Para64)); + return (0); + } +#endif /* DEBUG */ + + /* + * Store a trap message in the trap buffer and generate + * an event for user space applications with the + * SK_DRIVER_SENDEVENT macro. + */ + QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_WAR_UPP, + (unsigned int)Param.Para64); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + break; + + case SK_PNMI_EVT_SEN_ERR_LOW: +#ifdef DEBUG + if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_ERR_LOW parameter wrong, SensorIndex=%d\n", + (unsigned int)Param.Para64)); + return (0); + } +#endif /* DEBUG */ + + /* + * Store a trap message in the trap buffer and generate + * an event for user space applications with the + * SK_DRIVER_SENDEVENT macro. + */ + QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_ERR_LOW, + (unsigned int)Param.Para64); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + break; + + case SK_PNMI_EVT_SEN_ERR_UPP: +#ifdef DEBUG + if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_SEN_ERR_UPP parameter wrong, SensorIndex=%d\n", + (unsigned int)Param.Para64)); + return (0); + } +#endif /* DEBUG */ + + /* + * Store a trap message in the trap buffer and generate + * an event for user space applications with the + * SK_DRIVER_SENDEVENT macro. + */ + QueueSensorTrap(pAC, OID_SKGE_TRAP_SEN_ERR_UPP, + (unsigned int)Param.Para64); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + break; + + case SK_PNMI_EVT_CHG_EST_TIMER: + /* + * Calculate port switch average on a per hour basis + * Time interval for check : 28125 ms + * Number of values for average : 8 + * + * Be careful in changing these values, on change check + * - typedef of SK_PNMI_ESTIMATE (Size of EstValue + * array one less than value number) + * - Timer initialization SkTimerStart() in SkPnmiInit + * - Delta value below must be multiplicated with + * power of 2 + * + */ + pEst = &pAC->Pnmi.RlmtChangeEstimate; + CounterIndex = pEst->EstValueIndex + 1; + if (CounterIndex == 7) { + + CounterIndex = 0; + } + pEst->EstValueIndex = CounterIndex; + + NewestValue = pAC->Pnmi.RlmtChangeCts; + OldestValue = pEst->EstValue[CounterIndex]; + pEst->EstValue[CounterIndex] = NewestValue; + + /* + * Calculate average. Delta stores the number of + * port switches per 28125 * 8 = 225000 ms + */ + if (NewestValue >= OldestValue) { + + Delta = NewestValue - OldestValue; + } + else { + /* Overflow situation */ + Delta = (SK_U64)(0 - OldestValue) + NewestValue; + } + + /* + * Extrapolate delta to port switches per hour. + * Estimate = Delta * (3600000 / 225000) + * = Delta * 16 + * = Delta << 4 + */ + pAC->Pnmi.RlmtChangeEstimate.Estimate = Delta << 4; + + /* + * Check if threshold is exceeded. If the threshold is + * permanently exceeded every 28125 ms an event will be + * generated to remind the user of this condition. + */ + if ((pAC->Pnmi.RlmtChangeThreshold != 0) && + (pAC->Pnmi.RlmtChangeEstimate.Estimate >= + pAC->Pnmi.RlmtChangeThreshold)) { + + QueueSimpleTrap(pAC, OID_SKGE_TRAP_RLMT_CHANGE_THRES); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + } + + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + SkTimerStart(pAC, IoC, &pAC->Pnmi.RlmtChangeEstimate.EstTimer, + 28125000, SKGE_PNMI, SK_PNMI_EVT_CHG_EST_TIMER, + EventParam); + break; + + case SK_PNMI_EVT_CLEAR_COUNTER: + /* + * Param.Para32[0] contains the NetIndex (0 ..1). + * Param.Para32[1] is reserved, contains -1. + */ + NetIndex = (SK_U32)Param.Para32[0]; + +#ifdef DEBUG + if (NetIndex >= pAC->Rlmt.NumNets) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_CLEAR_COUNTER parameter wrong, NetIndex=%d\n", + NetIndex)); + + return (0); + } +#endif /* DEBUG */ + + /* + * Set all counters and timestamps to zero. + * The according NetIndex is required as a + * parameter of the event. + */ + ResetCounter(pAC, IoC, NetIndex); + break; + + case SK_PNMI_EVT_XMAC_RESET: + /* + * To grant continuous counter values store the current + * XMAC statistic values to the entries 1..n of the + * CounterOffset array. XMAC Errata #2 + */ +#ifdef DEBUG + if ((unsigned int)Param.Para64 >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_XMAC_RESET parameter wrong, PhysPortIndex=%d\n", + (unsigned int)Param.Para64)); + return (0); + } +#endif + PhysPortIndex = (unsigned int)Param.Para64; + + /* + * Update XMAC statistic to get fresh values + */ + Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); + if (Ret != SK_PNMI_ERR_OK) { + + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); + return (0); + } + /* + * Increment semaphore to indicate that an update was + * already done + */ + pAC->Pnmi.MacUpdatedFlag ++; + + for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX; + CounterIndex ++) { + + if (!StatAddr[CounterIndex][MacType].GetOffset) { + + continue; + } + + pAC->Pnmi.Port[PhysPortIndex].CounterOffset[CounterIndex] = + GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex); + + pAC->Pnmi.Port[PhysPortIndex].CounterHigh[CounterIndex] = 0; + } + + pAC->Pnmi.MacUpdatedFlag --; + break; + + case SK_PNMI_EVT_RLMT_PORT_UP: + PhysPortIndex = (unsigned int)Param.Para32[0]; +#ifdef DEBUG + if (PhysPortIndex >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_UP parameter" + " wrong, PhysPortIndex=%d\n", PhysPortIndex)); + + return (0); + } +#endif /* DEBUG */ + + /* + * Store a trap message in the trap buffer and generate an event for + * user space applications with the SK_DRIVER_SENDEVENT macro. + */ + QueueRlmtPortTrap(pAC, OID_SKGE_TRAP_RLMT_PORT_UP, PhysPortIndex); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + + /* Bugfix for XMAC errata (#10620)*/ + if (MacType == SK_MAC_XMAC) { + /* Add incremental difference to offset (#10620)*/ + (void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex, + XM_RXE_SHT_ERR, &Val32); + + Value = (((SK_U64)pAC->Pnmi.Port[PhysPortIndex]. + CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32); + pAC->Pnmi.Port[PhysPortIndex].CounterOffset[SK_PNMI_HRX_SHORTS] += + Value - pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark; + } + + /* Tell VctStatus() that a link was up meanwhile. */ + pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_LINK; + break; + + case SK_PNMI_EVT_RLMT_PORT_DOWN: + PhysPortIndex = (unsigned int)Param.Para32[0]; + +#ifdef DEBUG + if (PhysPortIndex >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_DOWN parameter" + " wrong, PhysPortIndex=%d\n", PhysPortIndex)); + + return (0); + } +#endif /* DEBUG */ + + /* + * Store a trap message in the trap buffer and generate an event for + * user space applications with the SK_DRIVER_SENDEVENT macro. + */ + QueueRlmtPortTrap(pAC, OID_SKGE_TRAP_RLMT_PORT_DOWN, PhysPortIndex); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + + /* Bugfix #10620 - get zero level for incremental difference */ + if (MacType == SK_MAC_XMAC) { + + (void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex, + XM_RXE_SHT_ERR, &Val32); + + pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark = + (((SK_U64)pAC->Pnmi.Port[PhysPortIndex]. + CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32); + } + break; + + case SK_PNMI_EVT_RLMT_ACTIVE_DOWN: + PhysPortIndex = (unsigned int)Param.Para32[0]; + NetIndex = (SK_U32)Param.Para32[1]; + +#ifdef DEBUG + if (PhysPortIndex >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_DOWN parameter too high, PhysPort=%d\n", + PhysPortIndex)); + } + + if (NetIndex >= pAC->Rlmt.NumNets) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_DOWN parameter too high, NetIndex=%d\n", + NetIndex)); + } +#endif /* DEBUG */ + + /* + * For now, ignore event if NetIndex != 0. + */ + if (Param.Para32[1] != 0) { + + return (0); + } + + /* + * Nothing to do if port is already inactive + */ + if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + return (0); + } + + /* + * Update statistic counters to calculate new offset for the virtual + * port and increment semaphore to indicate that an update was already + * done. + */ + if (MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1) != + SK_PNMI_ERR_OK) { + + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); + return (0); + } + pAC->Pnmi.MacUpdatedFlag ++; + + /* + * Calculate new counter offset for virtual port to grant continous + * counting on port switches. The virtual port consists of all currently + * active ports. The port down event indicates that a port is removed + * from the virtual port. Therefore add the counter value of the removed + * port to the CounterOffset for the virtual port to grant the same + * counter value. + */ + for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX; + CounterIndex ++) { + + if (!StatAddr[CounterIndex][MacType].GetOffset) { + + continue; + } + + Value = GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex); + + pAC->Pnmi.VirtualCounterOffset[CounterIndex] += Value; + } + + /* + * Set port to inactive + */ + pAC->Pnmi.Port[PhysPortIndex].ActiveFlag = SK_FALSE; + + pAC->Pnmi.MacUpdatedFlag --; + break; + + case SK_PNMI_EVT_RLMT_ACTIVE_UP: + PhysPortIndex = (unsigned int)Param.Para32[0]; + NetIndex = (SK_U32)Param.Para32[1]; + +#ifdef DEBUG + if (PhysPortIndex >= SK_MAX_MACS) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_UP parameter too high, PhysPort=%d\n", + PhysPortIndex)); + } + + if (NetIndex >= pAC->Rlmt.NumNets) { + + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, + ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_ACTIVE_UP parameter too high, NetIndex=%d\n", + NetIndex)); + } +#endif /* DEBUG */ + + /* + * For now, ignore event if NetIndex != 0. + */ + if (Param.Para32[1] != 0) { + + return (0); + } + + /* + * Nothing to do if port is already active + */ + if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + return (0); + } + + /* + * Statistic maintenance + */ + pAC->Pnmi.RlmtChangeCts ++; + pAC->Pnmi.RlmtChangeTime = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); + + /* + * Store a trap message in the trap buffer and generate an event for + * user space applications with the SK_DRIVER_SENDEVENT macro. + */ + QueueRlmtNewMacTrap(pAC, PhysPortIndex); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + + /* + * Update statistic counters to calculate new offset for the virtual + * port and increment semaphore to indicate that an update was + * already done. + */ + if (MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1) != + SK_PNMI_ERR_OK) { + + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); + return (0); + } + pAC->Pnmi.MacUpdatedFlag ++; + + /* + * Calculate new counter offset for virtual port to grant continous + * counting on port switches. A new port is added to the virtual port. + * Therefore substract the counter value of the new port from the + * CounterOffset for the virtual port to grant the same value. + */ + for (CounterIndex = 0; CounterIndex < SK_PNMI_MAX_IDX; + CounterIndex ++) { + + if (!StatAddr[CounterIndex][MacType].GetOffset) { + + continue; + } + + Value = GetPhysStatVal(pAC, IoC, PhysPortIndex, CounterIndex); + + pAC->Pnmi.VirtualCounterOffset[CounterIndex] -= Value; + } + + /* Set port to active */ + pAC->Pnmi.Port[PhysPortIndex].ActiveFlag = SK_TRUE; + + pAC->Pnmi.MacUpdatedFlag --; + break; + + case SK_PNMI_EVT_RLMT_SEGMENTATION: + /* + * Para.Para32[0] contains the NetIndex. + */ + + /* + * Store a trap message in the trap buffer and generate an event for + * user space applications with the SK_DRIVER_SENDEVENT macro. + */ + QueueSimpleTrap(pAC, OID_SKGE_TRAP_RLMT_SEGMENTATION); + (void)SK_DRIVER_SENDEVENT(pAC, IoC); + break; + + case SK_PNMI_EVT_RLMT_SET_NETS: + /* + * Param.Para32[0] contains the number of Nets. + * Param.Para32[1] is reserved, contains -1. + */ + /* + * Check number of nets + */ + MaxNetNumber = pAC->GIni.GIMacsFound; + if (((unsigned int)Param.Para32[0] < 1) + || ((unsigned int)Param.Para32[0] > MaxNetNumber)) { + return (SK_PNMI_ERR_UNKNOWN_NET); + } + + if ((unsigned int)Param.Para32[0] == 1) { /* single net mode */ + pAC->Pnmi.DualNetActiveFlag = SK_FALSE; + } + else { /* dual net mode */ + pAC->Pnmi.DualNetActiveFlag = SK_TRUE; + } + break; + + case SK_PNMI_EVT_VCT_RESET: + PhysPortIndex = Param.Para32[0]; + pPrt = &pAC->GIni.GP[PhysPortIndex]; + pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex]; + + if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING) { + RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE); + if (RetCode == 2) { + /* + * VCT test is still running. + * Start VCT timer counter again. + */ + SK_MEMSET((char *) &Param, 0, sizeof(Param)); + Param.Para32[0] = PhysPortIndex; + Param.Para32[1] = -1; + SkTimerStart(pAC, IoC, + &pAC->Pnmi.VctTimeout[PhysPortIndex].VctTimer, + 4000000, SKGE_PNMI, SK_PNMI_EVT_VCT_RESET, Param); + break; + } + pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING; + pAC->Pnmi.VctStatus[PhysPortIndex] |= + (SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE); + + /* Copy results for later use to PNMI struct. */ + for (i = 0; i < 4; i++) { + if (pPrt->PMdiPairSts[i] == SK_PNMI_VCT_NORMAL_CABLE) { + if ((pPrt->PMdiPairLen[i] > 35) && + (pPrt->PMdiPairLen[i] < 0xff)) { + pPrt->PMdiPairSts[i] = SK_PNMI_VCT_IMPEDANCE_MISMATCH; + } + } + if ((pPrt->PMdiPairLen[i] > 35) && + (pPrt->PMdiPairLen[i] != 0xff)) { + CableLength = 1000 * + (((175 * pPrt->PMdiPairLen[i]) / 210) - 28); + } + else { + CableLength = 0; + } + pVctBackupData->PMdiPairLen[i] = CableLength; + pVctBackupData->PMdiPairSts[i] = pPrt->PMdiPairSts[i]; + } + + Param.Para32[0] = PhysPortIndex; + Param.Para32[1] = -1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Param); + SkEventDispatcher(pAC, IoC); + } + + break; + + default: + break; + } + + SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); + return (0); +} + + +/****************************************************************************** + * + * Private functions + * + */ + +/***************************************************************************** + * + * PnmiVar - Gets, presets, and sets single OIDs + * + * Description: + * Looks up the requested OID, calls the corresponding handler + * function, and passes the parameters with the get, preset, or + * set command. The function is called by SkGePnmiGetVar, + * SkGePnmiPreSetVar, or SkGePnmiSetVar. + * + * Returns: + * SK_PNMI_ERR_XXX. For details have a look at the description of the + * calling functions. + * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist + */ +PNMI_STATIC int PnmiVar( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* Total length of pBuf management data */ +SK_U32 Instance, /* Instance (1..n) that is to be set or -1 */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + unsigned int TableIndex; + int Ret; + + + if ((TableIndex = LookupId(Id)) == (unsigned int)(-1)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_OID); + } + + /* Check NetIndex */ + if (NetIndex >= pAC->Rlmt.NumNets) { + return (SK_PNMI_ERR_UNKNOWN_NET); + } + + SK_PNMI_CHECKFLAGS("PnmiVar: On call"); + + Ret = IdTable[TableIndex].Func(pAC, IoC, Action, Id, pBuf, pLen, + Instance, TableIndex, NetIndex); + + SK_PNMI_CHECKFLAGS("PnmiVar: On return"); + + return (Ret); +} + +/***************************************************************************** + * + * PnmiStruct - Presets and Sets data in structure SK_PNMI_STRUCT_DATA + * + * Description: + * The return value of the function will also be stored in + * SK_PNMI_STRUCT_DATA if the passed buffer has the minimum size of + * SK_PNMI_MIN_STRUCT_SIZE. The sub-function runs through the IdTable, + * checks which OIDs are able to set, and calls the handler function of + * the OID to perform the set. The return value of the function will + * also be stored in SK_PNMI_STRUCT_DATA if the passed buffer has the + * minimum size of SK_PNMI_MIN_STRUCT_SIZE. The function is called + * by SkGePnmiPreSetStruct and SkGePnmiSetStruct. + * + * Returns: + * SK_PNMI_ERR_XXX. The codes are described in the calling functions. + * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist + */ +PNMI_STATIC int PnmiStruct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* PRESET/SET action to be performed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* Length of pBuf management data buffer */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + int Ret; + unsigned int TableIndex; + unsigned int DstOffset; + unsigned int Len; + unsigned int InstanceNo; + unsigned int InstanceCnt; + SK_U32 Instance; + SK_U32 Id; + + + /* Check if the passed buffer has the right size */ + if (*pLen < SK_PNMI_STRUCT_SIZE) { + + /* Check if we can return the error within the buffer */ + if (*pLen >= SK_PNMI_MIN_STRUCT_SIZE) { + + SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_TOO_SHORT, + (SK_U32)(-1)); + } + + *pLen = SK_PNMI_STRUCT_SIZE; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* Check NetIndex */ + if (NetIndex >= pAC->Rlmt.NumNets) { + return (SK_PNMI_ERR_UNKNOWN_NET); + } + + SK_PNMI_CHECKFLAGS("PnmiStruct: On call"); + + /* + * Update the values of RLMT and SIRQ and increment semaphores to + * indicate that an update was already done. + */ + if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { + + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + + if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) { + + SK_PNMI_SET_STAT(pBuf, Ret, (SK_U32)(-1)); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (Ret); + } + + pAC->Pnmi.RlmtUpdatedFlag ++; + pAC->Pnmi.SirqUpdatedFlag ++; + + /* Preset/Set values */ + for (TableIndex = 0; TableIndex < ID_TABLE_SIZE; TableIndex ++) { + + if ((IdTable[TableIndex].Access != SK_PNMI_RW) && + (IdTable[TableIndex].Access != SK_PNMI_WO)) { + + continue; + } + + InstanceNo = IdTable[TableIndex].InstanceNo; + Id = IdTable[TableIndex].Id; + + for (InstanceCnt = 1; InstanceCnt <= InstanceNo; + InstanceCnt ++) { + + DstOffset = IdTable[TableIndex].Offset + + (InstanceCnt - 1) * + IdTable[TableIndex].StructSize; + + /* + * Because VPD multiple instance variables are + * not setable we do not need to evaluate VPD + * instances. Have a look to VPD instance + * calculation in SkPnmiGetStruct(). + */ + Instance = (SK_U32)InstanceCnt; + + /* + * Evaluate needed buffer length + */ + Len = 0; + Ret = IdTable[TableIndex].Func(pAC, IoC, + SK_PNMI_GET, IdTable[TableIndex].Id, + NULL, &Len, Instance, TableIndex, NetIndex); + + if (Ret == SK_PNMI_ERR_UNKNOWN_INST) { + + break; + } + if (Ret != SK_PNMI_ERR_TOO_SHORT) { + + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + SK_PNMI_CHECKFLAGS("PnmiStruct: On return"); + SK_PNMI_SET_STAT(pBuf, + SK_PNMI_ERR_GENERAL, DstOffset); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (SK_PNMI_ERR_GENERAL); + } + if (Id == OID_SKGE_VPD_ACTION) { + + switch (*(pBuf + DstOffset)) { + + case SK_PNMI_VPD_CREATE: + Len = 3 + *(pBuf + DstOffset + 3); + break; + + case SK_PNMI_VPD_DELETE: + Len = 3; + break; + + default: + Len = 1; + break; + } + } + + /* Call the OID handler function */ + Ret = IdTable[TableIndex].Func(pAC, IoC, Action, + IdTable[TableIndex].Id, pBuf + DstOffset, + &Len, Instance, TableIndex, NetIndex); + + if (Ret != SK_PNMI_ERR_OK) { + + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + SK_PNMI_CHECKFLAGS("PnmiStruct: On return"); + SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_BAD_VALUE, + DstOffset); + *pLen = SK_PNMI_MIN_STRUCT_SIZE; + return (SK_PNMI_ERR_BAD_VALUE); + } + } + } + + pAC->Pnmi.RlmtUpdatedFlag --; + pAC->Pnmi.SirqUpdatedFlag --; + + SK_PNMI_CHECKFLAGS("PnmiStruct: On return"); + SK_PNMI_SET_STAT(pBuf, SK_PNMI_ERR_OK, (SK_U32)(-1)); + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * LookupId - Lookup an OID in the IdTable + * + * Description: + * Scans the IdTable to find the table entry of an OID. + * + * Returns: + * The table index or -1 if not found. + */ +PNMI_STATIC int LookupId( +SK_U32 Id) /* Object identifier to be searched */ +{ + int i; + + for (i = 0; i < ID_TABLE_SIZE; i++) { + + if (IdTable[i].Id == Id) { + + return i; + } + } + + return (-1); +} + +/***************************************************************************** + * + * OidStruct - Handler of OID_SKGE_ALL_DATA + * + * Description: + * This OID performs a Get/Preset/SetStruct call and returns all data + * in a SK_PNMI_STRUCT_DATA structure. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int OidStruct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + if (Id != OID_SKGE_ALL_DATA) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR003, + SK_PNMI_ERR003MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Check instance. We only handle single instance variables + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + switch (Action) { + + case SK_PNMI_GET: + return (SkPnmiGetStruct(pAC, IoC, pBuf, pLen, NetIndex)); + + case SK_PNMI_PRESET: + return (SkPnmiPreSetStruct(pAC, IoC, pBuf, pLen, NetIndex)); + + case SK_PNMI_SET: + return (SkPnmiSetStruct(pAC, IoC, pBuf, pLen, NetIndex)); + } + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR004, SK_PNMI_ERR004MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); +} + +/***************************************************************************** + * + * Perform - OID handler of OID_SKGE_ACTION + * + * Description: + * None. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Perform( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + int Ret; + SK_U32 ActionOp; + + + /* + * Check instance. We only handle single instance variables + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* Check if a get should be performed */ + if (Action == SK_PNMI_GET) { + + /* A get is easy. We always return the same value */ + ActionOp = (SK_U32)SK_PNMI_ACT_IDLE; + SK_PNMI_STORE_U32(pBuf, ActionOp); + *pLen = sizeof(SK_U32); + + return (SK_PNMI_ERR_OK); + } + + /* Continue with PRESET/SET action */ + if (*pLen > sizeof(SK_U32)) { + + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* Check if the command is a known one */ + SK_PNMI_READ_U32(pBuf, ActionOp); + if (*pLen > sizeof(SK_U32) || + (ActionOp != SK_PNMI_ACT_IDLE && + ActionOp != SK_PNMI_ACT_RESET && + ActionOp != SK_PNMI_ACT_SELFTEST && + ActionOp != SK_PNMI_ACT_RESETCNT)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* A preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + switch (ActionOp) { + + case SK_PNMI_ACT_IDLE: + /* Nothing to do */ + break; + + case SK_PNMI_ACT_RESET: + /* + * Perform a driver reset or something that comes near + * to this. + */ + Ret = SK_DRIVER_RESET(pAC, IoC); + if (Ret != 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR005, + SK_PNMI_ERR005MSG); + + return (SK_PNMI_ERR_GENERAL); + } + break; + + case SK_PNMI_ACT_SELFTEST: + /* + * Perform a driver selftest or something similar to this. + * Currently this feature is not used and will probably + * implemented in another way. + */ + Ret = SK_DRIVER_SELFTEST(pAC, IoC); + pAC->Pnmi.TestResult = Ret; + break; + + case SK_PNMI_ACT_RESETCNT: + /* Set all counters and timestamps to zero */ + ResetCounter(pAC, IoC, NetIndex); + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR006, + SK_PNMI_ERR006MSG); + + return (SK_PNMI_ERR_GENERAL); + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * Mac8023Stat - OID handler of OID_GEN_XXX and OID_802_3_XXX + * + * Description: + * Retrieves the statistic values of the virtual port (logical + * index 0). Only special OIDs of NDIS are handled which consist + * of a 32 bit instead of a 64 bit value. The OIDs are public + * because perhaps some other platform can use them too. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Mac8023Stat( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + int Ret; + SK_U64 StatVal; + SK_U32 StatVal32; + SK_BOOL Is64BitReq = SK_FALSE; + + /* + * Only the active Mac is returned + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + /* + * Check action type + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* Check length */ + switch (Id) { + + case OID_802_3_PERMANENT_ADDRESS: + case OID_802_3_CURRENT_ADDRESS: + if (*pLen < sizeof(SK_MAC_ADDR)) { + + *pLen = sizeof(SK_MAC_ADDR); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: +#ifndef SK_NDIS_64BIT_CTR + if (*pLen < sizeof(SK_U32)) { + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + +#else /* SK_NDIS_64BIT_CTR */ + + /* for compatibility, at least 32bit are required for OID */ + if (*pLen < sizeof(SK_U32)) { + /* + * but indicate handling for 64bit values, + * if insufficient space is provided + */ + *pLen = sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + + Is64BitReq = (*pLen < sizeof(SK_U64)) ? SK_FALSE : SK_TRUE; +#endif /* SK_NDIS_64BIT_CTR */ + break; + } + + /* + * Update all statistics, because we retrieve virtual MAC, which + * consists of multiple physical statistics and increment semaphore + * to indicate that an update was already done. + */ + Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); + if ( Ret != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.MacUpdatedFlag ++; + + /* + * Get value (MAC Index 0 identifies the virtual MAC) + */ + switch (Id) { + + case OID_802_3_PERMANENT_ADDRESS: + CopyMac(pBuf, &pAC->Addr.Net[NetIndex].PermanentMacAddress); + *pLen = sizeof(SK_MAC_ADDR); + break; + + case OID_802_3_CURRENT_ADDRESS: + CopyMac(pBuf, &pAC->Addr.Net[NetIndex].CurrentMacAddress); + *pLen = sizeof(SK_MAC_ADDR); + break; + + default: + StatVal = GetStatVal(pAC, IoC, 0, IdTable[TableIndex].Param, NetIndex); + + /* by default 32bit values are evaluated */ + if (!Is64BitReq) { + StatVal32 = (SK_U32)StatVal; + SK_PNMI_STORE_U32(pBuf, StatVal32); + *pLen = sizeof(SK_U32); + } + else { + SK_PNMI_STORE_U64(pBuf, StatVal); + *pLen = sizeof(SK_U64); + } + break; + } + + pAC->Pnmi.MacUpdatedFlag --; + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * MacPrivateStat - OID handler function of OID_SKGE_STAT_XXX + * + * Description: + * Retrieves the MAC statistic data. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int MacPrivateStat( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + unsigned int LogPortMax; + unsigned int LogPortIndex; + unsigned int PhysPortMax; + unsigned int Limit; + unsigned int Offset; + int MacType; + int Ret; + SK_U64 StatVal; + + + + /* Calculate instance if wished. MAC index 0 is the virtual MAC */ + PhysPortMax = pAC->GIni.GIMacsFound; + LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); + + MacType = pAC->GIni.GIMacType; + + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ + LogPortMax--; + } + + if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */ + /* Check instance range */ + if ((Instance < 1) || (Instance > LogPortMax)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance); + Limit = LogPortIndex + 1; + } + + else { /* Instance == (SK_U32)(-1), get all Instances of that OID */ + + LogPortIndex = 0; + Limit = LogPortMax; + } + + /* Check action */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* Check length */ + if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U64)) { + + *pLen = (Limit - LogPortIndex) * sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Update MAC statistic and increment semaphore to indicate that + * an update was already done. + */ + Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); + if (Ret != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.MacUpdatedFlag ++; + + /* Get value */ + Offset = 0; + for (; LogPortIndex < Limit; LogPortIndex ++) { + + switch (Id) { + +/* XXX not yet implemented due to XMAC problems + case OID_SKGE_STAT_TX_UTIL: + return (SK_PNMI_ERR_GENERAL); +*/ +/* XXX not yet implemented due to XMAC problems + case OID_SKGE_STAT_RX_UTIL: + return (SK_PNMI_ERR_GENERAL); +*/ + case OID_SKGE_STAT_RX: + if (MacType == SK_MAC_GMAC) { + StatVal = + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HRX_BROADCAST, NetIndex) + + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HRX_MULTICAST, NetIndex) + + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HRX_UNICAST, NetIndex) + + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HRX_UNDERSIZE, NetIndex); + } + else { + StatVal = GetStatVal(pAC, IoC, LogPortIndex, + IdTable[TableIndex].Param, NetIndex); + } + break; + + case OID_SKGE_STAT_TX: + if (MacType == SK_MAC_GMAC) { + StatVal = + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HTX_BROADCAST, NetIndex) + + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HTX_MULTICAST, NetIndex) + + GetStatVal(pAC, IoC, LogPortIndex, + SK_PNMI_HTX_UNICAST, NetIndex); + } + else { + StatVal = GetStatVal(pAC, IoC, LogPortIndex, + IdTable[TableIndex].Param, NetIndex); + } + break; + + default: + StatVal = GetStatVal(pAC, IoC, LogPortIndex, + IdTable[TableIndex].Param, NetIndex); + } + SK_PNMI_STORE_U64(pBuf + Offset, StatVal); + + Offset += sizeof(SK_U64); + } + *pLen = Offset; + + pAC->Pnmi.MacUpdatedFlag --; + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * Addr - OID handler function of OID_SKGE_PHYS_CUR_ADDR and _FAC_ADDR + * + * Description: + * Get/Presets/Sets the current and factory MAC address. The MAC + * address of the virtual port, which is reported to the OS, may + * not be changed, but the physical ones. A set to the virtual port + * will be ignored. No error should be reported because otherwise + * a multiple instance set (-1) would always fail. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Addr( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + int Ret; + unsigned int LogPortMax; + unsigned int PhysPortMax; + unsigned int LogPortIndex; + unsigned int PhysPortIndex; + unsigned int Limit; + unsigned int Offset = 0; + + /* + * Calculate instance if wished. MAC index 0 is the virtual + * MAC. + */ + PhysPortMax = pAC->GIni.GIMacsFound; + LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); + + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ + LogPortMax--; + } + + if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */ + /* Check instance range */ + if ((Instance < 1) || (Instance > LogPortMax)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance); + Limit = LogPortIndex + 1; + } + else { /* Instance == (SK_U32)(-1), get all Instances of that OID */ + + LogPortIndex = 0; + Limit = LogPortMax; + } + + /* + * Perform Action + */ + if (Action == SK_PNMI_GET) { + + /* Check length */ + if (*pLen < (Limit - LogPortIndex) * 6) { + + *pLen = (Limit - LogPortIndex) * 6; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Get value + */ + for (; LogPortIndex < Limit; LogPortIndex ++) { + + switch (Id) { + + case OID_SKGE_PHYS_CUR_ADDR: + if (LogPortIndex == 0) { + CopyMac(pBuf + Offset, &pAC->Addr.Net[NetIndex].CurrentMacAddress); + } + else { + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex); + + CopyMac(pBuf + Offset, + &pAC->Addr.Port[PhysPortIndex].CurrentMacAddress); + } + Offset += 6; + break; + + case OID_SKGE_PHYS_FAC_ADDR: + if (LogPortIndex == 0) { + CopyMac(pBuf + Offset, + &pAC->Addr.Net[NetIndex].PermanentMacAddress); + } + else { + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + CopyMac(pBuf + Offset, + &pAC->Addr.Port[PhysPortIndex].PermanentMacAddress); + } + Offset += 6; + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR008, + SK_PNMI_ERR008MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + + *pLen = Offset; + } + else { + /* + * The logical MAC address may not be changed only + * the physical ones + */ + if (Id == OID_SKGE_PHYS_FAC_ADDR) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* + * Only the current address may be changed + */ + if (Id != OID_SKGE_PHYS_CUR_ADDR) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR009, + SK_PNMI_ERR009MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* Check length */ + if (*pLen < (Limit - LogPortIndex) * 6) { + + *pLen = (Limit - LogPortIndex) * 6; + return (SK_PNMI_ERR_TOO_SHORT); + } + if (*pLen > (Limit - LogPortIndex) * 6) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* + * Check Action + */ + if (Action == SK_PNMI_PRESET) { + + *pLen = 0; + return (SK_PNMI_ERR_OK); + } + + /* + * Set OID_SKGE_MAC_CUR_ADDR + */ + for (; LogPortIndex < Limit; LogPortIndex ++, Offset += 6) { + + /* + * A set to virtual port and set of broadcast + * address will be ignored + */ + if (LogPortIndex == 0 || SK_MEMCMP(pBuf + Offset, + "\xff\xff\xff\xff\xff\xff", 6) == 0) { + + continue; + } + + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, + LogPortIndex); + + Ret = SkAddrOverride(pAC, IoC, PhysPortIndex, + (SK_MAC_ADDR *)(pBuf + Offset), + (LogPortIndex == 0 ? SK_ADDR_VIRTUAL_ADDRESS : + SK_ADDR_PHYSICAL_ADDRESS)); + if (Ret != SK_ADDR_OVERRIDE_SUCCESS) { + + return (SK_PNMI_ERR_GENERAL); + } + } + *pLen = Offset; + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * CsumStat - OID handler function of OID_SKGE_CHKSM_XXX + * + * Description: + * Retrieves the statistic values of the CSUM module. The CSUM data + * structure must be available in the SK_AC even if the CSUM module + * is not included, because PNMI reads the statistic data from the + * CSUM part of SK_AC directly. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int CsumStat( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + unsigned int Index; + unsigned int Limit; + unsigned int Offset = 0; + SK_U64 StatVal; + + + /* + * Calculate instance if wished + */ + if (Instance != (SK_U32)(-1)) { + + if ((Instance < 1) || (Instance > SKCS_NUM_PROTOCOLS)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + Index = (unsigned int)Instance - 1; + Limit = Index + 1; + } + else { + Index = 0; + Limit = SKCS_NUM_PROTOCOLS; + } + + /* + * Check action + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* Check length */ + if (*pLen < (Limit - Index) * sizeof(SK_U64)) { + + *pLen = (Limit - Index) * sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Get value + */ + for (; Index < Limit; Index ++) { + + switch (Id) { + + case OID_SKGE_CHKSM_RX_OK_CTS: + StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxOkCts; + break; + + case OID_SKGE_CHKSM_RX_UNABLE_CTS: + StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxUnableCts; + break; + + case OID_SKGE_CHKSM_RX_ERR_CTS: + StatVal = pAC->Csum.ProtoStats[NetIndex][Index].RxErrCts; + break; + + case OID_SKGE_CHKSM_TX_OK_CTS: + StatVal = pAC->Csum.ProtoStats[NetIndex][Index].TxOkCts; + break; + + case OID_SKGE_CHKSM_TX_UNABLE_CTS: + StatVal = pAC->Csum.ProtoStats[NetIndex][Index].TxUnableCts; + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR010, + SK_PNMI_ERR010MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + SK_PNMI_STORE_U64(pBuf + Offset, StatVal); + Offset += sizeof(SK_U64); + } + + /* + * Store used buffer space + */ + *pLen = Offset; + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * SensorStat - OID handler function of OID_SKGE_SENSOR_XXX + * + * Description: + * Retrieves the statistic values of the I2C module, which handles + * the temperature and voltage sensors. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int SensorStat( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + unsigned int i; + unsigned int Index; + unsigned int Limit; + unsigned int Offset; + unsigned int Len; + SK_U32 Val32; + SK_U64 Val64; + + + /* + * Calculate instance if wished + */ + if ((Instance != (SK_U32)(-1))) { + + if ((Instance < 1) || (Instance > (SK_U32)pAC->I2c.MaxSens)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + Index = (unsigned int)Instance -1; + Limit = (unsigned int)Instance; + } + else { + Index = 0; + Limit = (unsigned int) pAC->I2c.MaxSens; + } + + /* + * Check action + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* Check length */ + switch (Id) { + + case OID_SKGE_SENSOR_VALUE: + case OID_SKGE_SENSOR_WAR_THRES_LOW: + case OID_SKGE_SENSOR_WAR_THRES_UPP: + case OID_SKGE_SENSOR_ERR_THRES_LOW: + case OID_SKGE_SENSOR_ERR_THRES_UPP: + if (*pLen < (Limit - Index) * sizeof(SK_U32)) { + + *pLen = (Limit - Index) * sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_SENSOR_DESCR: + for (Offset = 0, i = Index; i < Limit; i ++) { + + Len = (unsigned int) + SK_STRLEN(pAC->I2c.SenTable[i].SenDesc) + 1; + if (Len >= SK_PNMI_STRINGLEN2) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR011, + SK_PNMI_ERR011MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + Offset += Len; + } + if (*pLen < Offset) { + + *pLen = Offset; + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_SENSOR_INDEX: + case OID_SKGE_SENSOR_TYPE: + case OID_SKGE_SENSOR_STATUS: + if (*pLen < Limit - Index) { + + *pLen = Limit - Index; + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_SENSOR_WAR_CTS: + case OID_SKGE_SENSOR_WAR_TIME: + case OID_SKGE_SENSOR_ERR_CTS: + case OID_SKGE_SENSOR_ERR_TIME: + if (*pLen < (Limit - Index) * sizeof(SK_U64)) { + + *pLen = (Limit - Index) * sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR012, + SK_PNMI_ERR012MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + + } + + /* + * Get value + */ + for (Offset = 0; Index < Limit; Index ++) { + + switch (Id) { + + case OID_SKGE_SENSOR_INDEX: + *(pBuf + Offset) = (char)Index; + Offset += sizeof(char); + break; + + case OID_SKGE_SENSOR_DESCR: + Len = SK_STRLEN(pAC->I2c.SenTable[Index].SenDesc); + SK_MEMCPY(pBuf + Offset + 1, + pAC->I2c.SenTable[Index].SenDesc, Len); + *(pBuf + Offset) = (char)Len; + Offset += Len + 1; + break; + + case OID_SKGE_SENSOR_TYPE: + *(pBuf + Offset) = + (char)pAC->I2c.SenTable[Index].SenType; + Offset += sizeof(char); + break; + + case OID_SKGE_SENSOR_VALUE: + Val32 = (SK_U32)pAC->I2c.SenTable[Index].SenValue; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_WAR_THRES_LOW: + Val32 = (SK_U32)pAC->I2c.SenTable[Index]. + SenThreWarnLow; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_WAR_THRES_UPP: + Val32 = (SK_U32)pAC->I2c.SenTable[Index]. + SenThreWarnHigh; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_ERR_THRES_LOW: + Val32 = (SK_U32)pAC->I2c.SenTable[Index]. + SenThreErrLow; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_ERR_THRES_UPP: + Val32 = pAC->I2c.SenTable[Index].SenThreErrHigh; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_STATUS: + *(pBuf + Offset) = + (char)pAC->I2c.SenTable[Index].SenErrFlag; + Offset += sizeof(char); + break; + + case OID_SKGE_SENSOR_WAR_CTS: + Val64 = pAC->I2c.SenTable[Index].SenWarnCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_SENSOR_ERR_CTS: + Val64 = pAC->I2c.SenTable[Index].SenErrCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_SENSOR_WAR_TIME: + Val64 = SK_PNMI_HUNDREDS_SEC(pAC->I2c.SenTable[Index]. + SenBegWarnTS); + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_SENSOR_ERR_TIME: + Val64 = SK_PNMI_HUNDREDS_SEC(pAC->I2c.SenTable[Index]. + SenBegErrTS); + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("SensorStat: Unknown OID should be handled before")); + + return (SK_PNMI_ERR_GENERAL); + } + } + + /* + * Store used buffer space + */ + *pLen = Offset; + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * Vpd - OID handler function of OID_SKGE_VPD_XXX + * + * Description: + * Get/preset/set of VPD data. As instance the name of a VPD key + * can be passed. The Instance parameter is a SK_U32 and can be + * used as a string buffer for the VPD key, because their maximum + * length is 4 byte. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Vpd( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + SK_VPD_STATUS *pVpdStatus; + unsigned int BufLen; + char Buf[256]; + char KeyArr[SK_PNMI_VPD_ENTRIES][SK_PNMI_VPD_KEY_SIZE]; + char KeyStr[SK_PNMI_VPD_KEY_SIZE]; + unsigned int KeyNo; + unsigned int Offset; + unsigned int Index; + unsigned int FirstIndex; + unsigned int LastIndex; + unsigned int Len; + int Ret; + SK_U32 Val32; + + /* + * Get array of all currently stored VPD keys + */ + Ret = GetVpdKeyArr(pAC, IoC, &KeyArr[0][0], sizeof(KeyArr), &KeyNo); + if (Ret != SK_PNMI_ERR_OK) { + *pLen = 0; + return (Ret); + } + + /* + * If instance is not -1, try to find the requested VPD key for + * the multiple instance variables. The other OIDs as for example + * OID VPD_ACTION are single instance variables and must be + * handled separatly. + */ + FirstIndex = 0; + LastIndex = KeyNo; + + if ((Instance != (SK_U32)(-1))) { + + if (Id == OID_SKGE_VPD_KEY || Id == OID_SKGE_VPD_VALUE || + Id == OID_SKGE_VPD_ACCESS) { + + SK_STRNCPY(KeyStr, (char *)&Instance, 4); + KeyStr[4] = 0; + + for (Index = 0; Index < KeyNo; Index ++) { + + if (SK_STRCMP(KeyStr, KeyArr[Index]) == 0) { + FirstIndex = Index; + LastIndex = Index+1; + break; + } + } + if (Index == KeyNo) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + } + else if (Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + } + + /* + * Get value, if a query should be performed + */ + if (Action == SK_PNMI_GET) { + + switch (Id) { + + case OID_SKGE_VPD_FREE_BYTES: + /* Check length of buffer */ + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + /* Get number of free bytes */ + pVpdStatus = VpdStat(pAC, IoC); + if (pVpdStatus == NULL) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR017, + SK_PNMI_ERR017MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + if ((pVpdStatus->vpd_status & VPD_VALID) == 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR018, + SK_PNMI_ERR018MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + Val32 = (SK_U32)pVpdStatus->vpd_free_rw; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_VPD_ENTRIES_LIST: + /* Check length */ + for (Len = 0, Index = 0; Index < KeyNo; Index ++) { + + Len += SK_STRLEN(KeyArr[Index]) + 1; + } + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* Get value */ + *(pBuf) = (char)Len - 1; + for (Offset = 1, Index = 0; Index < KeyNo; Index ++) { + + Len = SK_STRLEN(KeyArr[Index]); + SK_MEMCPY(pBuf + Offset, KeyArr[Index], Len); + + Offset += Len; + + if (Index < KeyNo - 1) { + + *(pBuf + Offset) = ' '; + Offset ++; + } + } + *pLen = Offset; + break; + + case OID_SKGE_VPD_ENTRIES_NUMBER: + /* Check length */ + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + + Val32 = (SK_U32)KeyNo; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_VPD_KEY: + /* Check buffer length, if it is large enough */ + for (Len = 0, Index = FirstIndex; + Index < LastIndex; Index ++) { + + Len += SK_STRLEN(KeyArr[Index]) + 1; + } + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Get the key to an intermediate buffer, because + * we have to prepend a length byte. + */ + for (Offset = 0, Index = FirstIndex; + Index < LastIndex; Index ++) { + + Len = SK_STRLEN(KeyArr[Index]); + + *(pBuf + Offset) = (char)Len; + SK_MEMCPY(pBuf + Offset + 1, KeyArr[Index], + Len); + Offset += Len + 1; + } + *pLen = Offset; + break; + + case OID_SKGE_VPD_VALUE: + /* Check the buffer length if it is large enough */ + for (Offset = 0, Index = FirstIndex; + Index < LastIndex; Index ++) { + + BufLen = 256; + if (VpdRead(pAC, IoC, KeyArr[Index], Buf, + (int *)&BufLen) > 0 || + BufLen >= SK_PNMI_VPD_DATALEN) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR021, + SK_PNMI_ERR021MSG); + + return (SK_PNMI_ERR_GENERAL); + } + Offset += BufLen + 1; + } + if (*pLen < Offset) { + + *pLen = Offset; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * Get the value to an intermediate buffer, because + * we have to prepend a length byte. + */ + for (Offset = 0, Index = FirstIndex; + Index < LastIndex; Index ++) { + + BufLen = 256; + if (VpdRead(pAC, IoC, KeyArr[Index], Buf, + (int *)&BufLen) > 0 || + BufLen >= SK_PNMI_VPD_DATALEN) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR022, + SK_PNMI_ERR022MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + *(pBuf + Offset) = (char)BufLen; + SK_MEMCPY(pBuf + Offset + 1, Buf, BufLen); + Offset += BufLen + 1; + } + *pLen = Offset; + break; + + case OID_SKGE_VPD_ACCESS: + if (*pLen < LastIndex - FirstIndex) { + + *pLen = LastIndex - FirstIndex; + return (SK_PNMI_ERR_TOO_SHORT); + } + + for (Offset = 0, Index = FirstIndex; + Index < LastIndex; Index ++) { + + if (VpdMayWrite(KeyArr[Index])) { + + *(pBuf + Offset) = SK_PNMI_VPD_RW; + } + else { + *(pBuf + Offset) = SK_PNMI_VPD_RO; + } + Offset ++; + } + *pLen = Offset; + break; + + case OID_SKGE_VPD_ACTION: + Offset = LastIndex - FirstIndex; + if (*pLen < Offset) { + + *pLen = Offset; + return (SK_PNMI_ERR_TOO_SHORT); + } + SK_MEMSET(pBuf, 0, Offset); + *pLen = Offset; + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR023, + SK_PNMI_ERR023MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + else { + /* The only OID which can be set is VPD_ACTION */ + if (Id != OID_SKGE_VPD_ACTION) { + + if (Id == OID_SKGE_VPD_FREE_BYTES || + Id == OID_SKGE_VPD_ENTRIES_LIST || + Id == OID_SKGE_VPD_ENTRIES_NUMBER || + Id == OID_SKGE_VPD_KEY || + Id == OID_SKGE_VPD_VALUE || + Id == OID_SKGE_VPD_ACCESS) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR024, + SK_PNMI_ERR024MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * From this point we handle VPD_ACTION. Check the buffer + * length. It should at least have the size of one byte. + */ + if (*pLen < 1) { + + *pLen = 1; + return (SK_PNMI_ERR_TOO_SHORT); + } + + /* + * The first byte contains the VPD action type we should + * perform. + */ + switch (*pBuf) { + + case SK_PNMI_VPD_IGNORE: + /* Nothing to do */ + break; + + case SK_PNMI_VPD_CREATE: + /* + * We have to create a new VPD entry or we modify + * an existing one. Check first the buffer length. + */ + if (*pLen < 4) { + + *pLen = 4; + return (SK_PNMI_ERR_TOO_SHORT); + } + KeyStr[0] = pBuf[1]; + KeyStr[1] = pBuf[2]; + KeyStr[2] = 0; + + /* + * Is the entry writable or does it belong to the + * read-only area? + */ + if (!VpdMayWrite(KeyStr)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + Offset = (int)pBuf[3] & 0xFF; + + SK_MEMCPY(Buf, pBuf + 4, Offset); + Buf[Offset] = 0; + + /* A preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + /* Write the new entry or modify an existing one */ + Ret = VpdWrite(pAC, IoC, KeyStr, Buf); + if (Ret == SK_PNMI_VPD_NOWRITE ) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + else if (Ret != SK_PNMI_VPD_OK) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR025, + SK_PNMI_ERR025MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Perform an update of the VPD data. This is + * not mandantory, but just to be sure. + */ + Ret = VpdUpdate(pAC, IoC); + if (Ret != SK_PNMI_VPD_OK) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR026, + SK_PNMI_ERR026MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + break; + + case SK_PNMI_VPD_DELETE: + /* Check if the buffer size is plausible */ + if (*pLen < 3) { + + *pLen = 3; + return (SK_PNMI_ERR_TOO_SHORT); + } + if (*pLen > 3) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + KeyStr[0] = pBuf[1]; + KeyStr[1] = pBuf[2]; + KeyStr[2] = 0; + + /* Find the passed key in the array */ + for (Index = 0; Index < KeyNo; Index ++) { + + if (SK_STRCMP(KeyStr, KeyArr[Index]) == 0) { + + break; + } + } + /* + * If we cannot find the key it is wrong, so we + * return an appropriate error value. + */ + if (Index == KeyNo) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + /* Ok, you wanted it and you will get it */ + Ret = VpdDelete(pAC, IoC, KeyStr); + if (Ret != SK_PNMI_VPD_OK) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR027, + SK_PNMI_ERR027MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Perform an update of the VPD data. This is + * not mandantory, but just to be sure. + */ + Ret = VpdUpdate(pAC, IoC); + if (Ret != SK_PNMI_VPD_OK) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR028, + SK_PNMI_ERR028MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * General - OID handler function of various single instance OIDs + * + * Description: + * The code is simple. No description necessary. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int General( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + int Ret; + unsigned int Index; + unsigned int Len; + unsigned int Offset; + unsigned int Val; + SK_U8 Val8; + SK_U16 Val16; + SK_U32 Val32; + SK_U64 Val64; + SK_U64 Val64RxHwErrs = 0; + SK_U64 Val64TxHwErrs = 0; + SK_BOOL Is64BitReq = SK_FALSE; + char Buf[256]; + int MacType; + + /* + * Check instance. We only handle single instance variables. + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + /* + * Check action. We only allow get requests. + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + MacType = pAC->GIni.GIMacType; + + /* + * Check length for the various supported OIDs + */ + switch (Id) { + + case OID_GEN_XMIT_ERROR: + case OID_GEN_RCV_ERROR: + case OID_GEN_RCV_NO_BUFFER: +#ifndef SK_NDIS_64BIT_CTR + if (*pLen < sizeof(SK_U32)) { + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + +#else /* SK_NDIS_64BIT_CTR */ + + /* + * for compatibility, at least 32bit are required for oid + */ + if (*pLen < sizeof(SK_U32)) { + /* + * but indicate handling for 64bit values, + * if insufficient space is provided + */ + *pLen = sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + + Is64BitReq = (*pLen < sizeof(SK_U64)) ? SK_FALSE : SK_TRUE; +#endif /* SK_NDIS_64BIT_CTR */ + break; + + case OID_SKGE_PORT_NUMBER: + case OID_SKGE_DEVICE_TYPE: + case OID_SKGE_RESULT: + case OID_SKGE_RLMT_MONITOR_NUMBER: + case OID_GEN_TRANSMIT_QUEUE_LENGTH: + case OID_SKGE_TRAP_NUMBER: + case OID_SKGE_MDB_VERSION: + case OID_SKGE_BOARDLEVEL: + case OID_SKGE_CHIPID: + case OID_SKGE_RAMSIZE: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_CHIPSET: + if (*pLen < sizeof(SK_U16)) { + + *pLen = sizeof(SK_U16); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_BUS_TYPE: + case OID_SKGE_BUS_SPEED: + case OID_SKGE_BUS_WIDTH: + case OID_SKGE_SENSOR_NUMBER: + case OID_SKGE_CHKSM_NUMBER: + case OID_SKGE_VAUXAVAIL: + if (*pLen < sizeof(SK_U8)) { + + *pLen = sizeof(SK_U8); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_TX_SW_QUEUE_LEN: + case OID_SKGE_TX_SW_QUEUE_MAX: + case OID_SKGE_TX_RETRY: + case OID_SKGE_RX_INTR_CTS: + case OID_SKGE_TX_INTR_CTS: + case OID_SKGE_RX_NO_BUF_CTS: + case OID_SKGE_TX_NO_BUF_CTS: + case OID_SKGE_TX_USED_DESCR_NO: + case OID_SKGE_RX_DELIVERED_CTS: + case OID_SKGE_RX_OCTETS_DELIV_CTS: + case OID_SKGE_RX_HW_ERROR_CTS: + case OID_SKGE_TX_HW_ERROR_CTS: + case OID_SKGE_IN_ERRORS_CTS: + case OID_SKGE_OUT_ERROR_CTS: + case OID_SKGE_ERR_RECOVERY_CTS: + case OID_SKGE_SYSUPTIME: + if (*pLen < sizeof(SK_U64)) { + + *pLen = sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + /* Checked later */ + break; + } + + /* Update statistic */ + if (Id == OID_SKGE_RX_HW_ERROR_CTS || + Id == OID_SKGE_TX_HW_ERROR_CTS || + Id == OID_SKGE_IN_ERRORS_CTS || + Id == OID_SKGE_OUT_ERROR_CTS || + Id == OID_GEN_XMIT_ERROR || + Id == OID_GEN_RCV_ERROR) { + + /* Force the XMAC to update its statistic counters and + * Increment semaphore to indicate that an update was + * already done. + */ + Ret = MacUpdate(pAC, IoC, 0, pAC->GIni.GIMacsFound - 1); + if (Ret != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.MacUpdatedFlag ++; + + /* + * Some OIDs consist of multiple hardware counters. Those + * values which are contained in all of them will be added + * now. + */ + switch (Id) { + + case OID_SKGE_RX_HW_ERROR_CTS: + case OID_SKGE_IN_ERRORS_CTS: + case OID_GEN_RCV_ERROR: + Val64RxHwErrs = + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_MISSED, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_FRAMING, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_OVERFLOW, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_JABBER, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_CARRIER, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_IRLENGTH, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_SYMBOL, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_SHORTS, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_RUNT, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_TOO_LONG, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_FCS, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_CEXT, NetIndex); + break; + + case OID_SKGE_TX_HW_ERROR_CTS: + case OID_SKGE_OUT_ERROR_CTS: + case OID_GEN_XMIT_ERROR: + Val64TxHwErrs = + GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_EXCESS_COL, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_LATE_COL, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_UNDERRUN, NetIndex) + + GetStatVal(pAC, IoC, 0, SK_PNMI_HTX_CARRIER, NetIndex); + break; + } + } + + /* + * Retrieve value + */ + switch (Id) { + + case OID_SKGE_SUPPORTED_LIST: + Len = ID_TABLE_SIZE * sizeof(SK_U32); + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + for (Offset = 0, Index = 0; Offset < Len; + Offset += sizeof(SK_U32), Index ++) { + + Val32 = (SK_U32)IdTable[Index].Id; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + } + *pLen = Len; + break; + + case OID_SKGE_BOARDLEVEL: + Val32 = (SK_U32)pAC->GIni.GILevel; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_PORT_NUMBER: + Val32 = (SK_U32)pAC->GIni.GIMacsFound; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_DEVICE_TYPE: + Val32 = (SK_U32)pAC->Pnmi.DeviceType; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_DRIVER_DESCR: + if (pAC->Pnmi.pDriverDescription == NULL) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR007, + SK_PNMI_ERR007MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + Len = SK_STRLEN(pAC->Pnmi.pDriverDescription) + 1; + if (Len > SK_PNMI_STRINGLEN1) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR029, + SK_PNMI_ERR029MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + *pBuf = (char)(Len - 1); + SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverDescription, Len - 1); + *pLen = Len; + break; + + case OID_SKGE_DRIVER_VERSION: + if (pAC->Pnmi.pDriverVersion == NULL) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030, + SK_PNMI_ERR030MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + Len = SK_STRLEN(pAC->Pnmi.pDriverVersion) + 1; + if (Len > SK_PNMI_STRINGLEN1) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031, + SK_PNMI_ERR031MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + *pBuf = (char)(Len - 1); + SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverVersion, Len - 1); + *pLen = Len; + break; + + case OID_SKGE_DRIVER_RELDATE: + if (pAC->Pnmi.pDriverReleaseDate == NULL) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030, + SK_PNMI_ERR053MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + Len = SK_STRLEN(pAC->Pnmi.pDriverReleaseDate) + 1; + if (Len > SK_PNMI_STRINGLEN1) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031, + SK_PNMI_ERR054MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + *pBuf = (char)(Len - 1); + SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverReleaseDate, Len - 1); + *pLen = Len; + break; + + case OID_SKGE_DRIVER_FILENAME: + if (pAC->Pnmi.pDriverFileName == NULL) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR030, + SK_PNMI_ERR055MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + Len = SK_STRLEN(pAC->Pnmi.pDriverFileName) + 1; + if (Len > SK_PNMI_STRINGLEN1) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR031, + SK_PNMI_ERR056MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + *pBuf = (char)(Len - 1); + SK_MEMCPY(pBuf + 1, pAC->Pnmi.pDriverFileName, Len - 1); + *pLen = Len; + break; + + case OID_SKGE_HW_DESCR: + /* + * The hardware description is located in the VPD. This + * query may move to the initialisation routine. But + * the VPD data is cached and therefore a call here + * will not make much difference. + */ + Len = 256; + if (VpdRead(pAC, IoC, VPD_NAME, Buf, (int *)&Len) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR032, + SK_PNMI_ERR032MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + Len ++; + if (Len > SK_PNMI_STRINGLEN1) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR033, + SK_PNMI_ERR033MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + *pBuf = (char)(Len - 1); + SK_MEMCPY(pBuf + 1, Buf, Len - 1); + *pLen = Len; + break; + + case OID_SKGE_HW_VERSION: + /* Oh, I love to do some string manipulation */ + if (*pLen < 5) { + + *pLen = 5; + return (SK_PNMI_ERR_TOO_SHORT); + } + Val8 = (SK_U8)pAC->GIni.GIPciHwRev; + pBuf[0] = 4; + pBuf[1] = 'v'; + pBuf[2] = (char)(0x30 | ((Val8 >> 4) & 0x0F)); + pBuf[3] = '.'; + pBuf[4] = (char)(0x30 | (Val8 & 0x0F)); + *pLen = 5; + break; + + case OID_SKGE_CHIPSET: + Val16 = pAC->Pnmi.Chipset; + SK_PNMI_STORE_U16(pBuf, Val16); + *pLen = sizeof(SK_U16); + break; + + case OID_SKGE_CHIPID: + Val32 = pAC->GIni.GIChipId; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_RAMSIZE: + Val32 = pAC->GIni.GIRamSize; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_VAUXAVAIL: + *pBuf = (char) pAC->GIni.GIVauxAvail; + *pLen = sizeof(char); + break; + + case OID_SKGE_BUS_TYPE: + *pBuf = (char) SK_PNMI_BUS_PCI; + *pLen = sizeof(char); + break; + + case OID_SKGE_BUS_SPEED: + *pBuf = pAC->Pnmi.PciBusSpeed; + *pLen = sizeof(char); + break; + + case OID_SKGE_BUS_WIDTH: + *pBuf = pAC->Pnmi.PciBusWidth; + *pLen = sizeof(char); + break; + + case OID_SKGE_RESULT: + Val32 = pAC->Pnmi.TestResult; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_SENSOR_NUMBER: + *pBuf = (char)pAC->I2c.MaxSens; + *pLen = sizeof(char); + break; + + case OID_SKGE_CHKSM_NUMBER: + *pBuf = SKCS_NUM_PROTOCOLS; + *pLen = sizeof(char); + break; + + case OID_SKGE_TRAP_NUMBER: + GetTrapQueueLen(pAC, &Len, &Val); + Val32 = (SK_U32)Val; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_TRAP: + GetTrapQueueLen(pAC, &Len, &Val); + if (*pLen < Len) { + + *pLen = Len; + return (SK_PNMI_ERR_TOO_SHORT); + } + CopyTrapQueue(pAC, pBuf); + *pLen = Len; + break; + + case OID_SKGE_RLMT_MONITOR_NUMBER: +/* XXX Not yet implemented by RLMT therefore we return zero elements */ + Val32 = 0; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_TX_SW_QUEUE_LEN: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxSwQueueLen; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxSwQueueLen + + pAC->Pnmi.BufPort[1].TxSwQueueLen; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxSwQueueLen; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxSwQueueLen + + pAC->Pnmi.Port[1].TxSwQueueLen; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + + case OID_SKGE_TX_SW_QUEUE_MAX: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxSwQueueMax; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxSwQueueMax + + pAC->Pnmi.BufPort[1].TxSwQueueMax; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxSwQueueMax; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxSwQueueMax + + pAC->Pnmi.Port[1].TxSwQueueMax; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_TX_RETRY: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxRetryCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxRetryCts + + pAC->Pnmi.BufPort[1].TxRetryCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxRetryCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxRetryCts + + pAC->Pnmi.Port[1].TxRetryCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RX_INTR_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].RxIntrCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].RxIntrCts + + pAC->Pnmi.BufPort[1].RxIntrCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].RxIntrCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].RxIntrCts + + pAC->Pnmi.Port[1].RxIntrCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_TX_INTR_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxIntrCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxIntrCts + + pAC->Pnmi.BufPort[1].TxIntrCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxIntrCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxIntrCts + + pAC->Pnmi.Port[1].TxIntrCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RX_NO_BUF_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].RxNoBufCts + + pAC->Pnmi.BufPort[1].RxNoBufCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].RxNoBufCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].RxNoBufCts + + pAC->Pnmi.Port[1].RxNoBufCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_TX_NO_BUF_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxNoBufCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxNoBufCts + + pAC->Pnmi.BufPort[1].TxNoBufCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxNoBufCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxNoBufCts + + pAC->Pnmi.Port[1].TxNoBufCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_TX_USED_DESCR_NO: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].TxUsedDescrNo; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].TxUsedDescrNo + + pAC->Pnmi.BufPort[1].TxUsedDescrNo; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].TxUsedDescrNo; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].TxUsedDescrNo + + pAC->Pnmi.Port[1].TxUsedDescrNo; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RX_DELIVERED_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].RxDeliveredCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].RxDeliveredCts + + pAC->Pnmi.BufPort[1].RxDeliveredCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].RxDeliveredCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].RxDeliveredCts + + pAC->Pnmi.Port[1].RxDeliveredCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RX_OCTETS_DELIV_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].RxOctetsDeliveredCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].RxOctetsDeliveredCts + + pAC->Pnmi.BufPort[1].RxOctetsDeliveredCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].RxOctetsDeliveredCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].RxOctetsDeliveredCts + + pAC->Pnmi.Port[1].RxOctetsDeliveredCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RX_HW_ERROR_CTS: + SK_PNMI_STORE_U64(pBuf, Val64RxHwErrs); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_TX_HW_ERROR_CTS: + SK_PNMI_STORE_U64(pBuf, Val64TxHwErrs); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_IN_ERRORS_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = Val64RxHwErrs + pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; + } + /* Single net mode */ + else { + Val64 = Val64RxHwErrs + + pAC->Pnmi.BufPort[0].RxNoBufCts + + pAC->Pnmi.BufPort[1].RxNoBufCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = Val64RxHwErrs + pAC->Pnmi.Port[NetIndex].RxNoBufCts; + } + /* Single net mode */ + else { + Val64 = Val64RxHwErrs + + pAC->Pnmi.Port[0].RxNoBufCts + + pAC->Pnmi.Port[1].RxNoBufCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_OUT_ERROR_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = Val64TxHwErrs + pAC->Pnmi.BufPort[NetIndex].TxNoBufCts; + } + /* Single net mode */ + else { + Val64 = Val64TxHwErrs + + pAC->Pnmi.BufPort[0].TxNoBufCts + + pAC->Pnmi.BufPort[1].TxNoBufCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = Val64TxHwErrs + pAC->Pnmi.Port[NetIndex].TxNoBufCts; + } + /* Single net mode */ + else { + Val64 = Val64TxHwErrs + + pAC->Pnmi.Port[0].TxNoBufCts + + pAC->Pnmi.Port[1].TxNoBufCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_ERR_RECOVERY_CTS: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.BufPort[NetIndex].ErrRecoveryCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.BufPort[0].ErrRecoveryCts + + pAC->Pnmi.BufPort[1].ErrRecoveryCts; + } + } + else { + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + Val64 = pAC->Pnmi.Port[NetIndex].ErrRecoveryCts; + } + /* Single net mode */ + else { + Val64 = pAC->Pnmi.Port[0].ErrRecoveryCts + + pAC->Pnmi.Port[1].ErrRecoveryCts; + } + } + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_SYSUPTIME: + Val64 = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); + Val64 -= pAC->Pnmi.StartUpTime; + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_MDB_VERSION: + Val32 = SK_PNMI_MDB_VERSION; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_GEN_RCV_ERROR: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + Val64 = Val64RxHwErrs + pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; + } + else { + Val64 = Val64RxHwErrs + pAC->Pnmi.Port[NetIndex].RxNoBufCts; + } + + /* + * by default 32bit values are evaluated + */ + if (!Is64BitReq) { + Val32 = (SK_U32)Val64; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + } + else { + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + } + break; + + case OID_GEN_XMIT_ERROR: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + Val64 = Val64TxHwErrs + pAC->Pnmi.BufPort[NetIndex].TxNoBufCts; + } + else { + Val64 = Val64TxHwErrs + pAC->Pnmi.Port[NetIndex].TxNoBufCts; + } + + /* + * by default 32bit values are evaluated + */ + if (!Is64BitReq) { + Val32 = (SK_U32)Val64; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + } + else { + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + } + break; + + case OID_GEN_RCV_NO_BUFFER: + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + Val64 = pAC->Pnmi.BufPort[NetIndex].RxNoBufCts; + } + else { + Val64 = pAC->Pnmi.Port[NetIndex].RxNoBufCts; + } + + /* + * by default 32bit values are evaluated + */ + if (!Is64BitReq) { + Val32 = (SK_U32)Val64; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + } + else { + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + } + break; + + case OID_GEN_TRANSMIT_QUEUE_LENGTH: + Val32 = (SK_U32)pAC->Pnmi.Port[NetIndex].TxSwQueueLen; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR034, + SK_PNMI_ERR034MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + if (Id == OID_SKGE_RX_HW_ERROR_CTS || + Id == OID_SKGE_TX_HW_ERROR_CTS || + Id == OID_SKGE_IN_ERRORS_CTS || + Id == OID_SKGE_OUT_ERROR_CTS || + Id == OID_GEN_XMIT_ERROR || + Id == OID_GEN_RCV_ERROR) { + + pAC->Pnmi.MacUpdatedFlag --; + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * Rlmt - OID handler function of OID_SKGE_RLMT_XXX single instance. + * + * Description: + * Get/Presets/Sets the RLMT OIDs. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Rlmt( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + int Ret; + unsigned int PhysPortIndex; + unsigned int PhysPortMax; + SK_EVPARA EventParam; + SK_U32 Val32; + SK_U64 Val64; + + + /* + * Check instance. Only single instance OIDs are allowed here. + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + /* + * Perform the requested action. + */ + if (Action == SK_PNMI_GET) { + + /* + * Check if the buffer length is large enough. + */ + + switch (Id) { + + case OID_SKGE_RLMT_MODE: + case OID_SKGE_RLMT_PORT_ACTIVE: + case OID_SKGE_RLMT_PORT_PREFERRED: + if (*pLen < sizeof(SK_U8)) { + + *pLen = sizeof(SK_U8); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_RLMT_PORT_NUMBER: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_RLMT_CHANGE_CTS: + case OID_SKGE_RLMT_CHANGE_TIME: + case OID_SKGE_RLMT_CHANGE_ESTIM: + case OID_SKGE_RLMT_CHANGE_THRES: + if (*pLen < sizeof(SK_U64)) { + + *pLen = sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR035, + SK_PNMI_ERR035MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Update RLMT statistic and increment semaphores to indicate + * that an update was already done. Maybe RLMT will hold its + * statistic always up to date some time. Then we can + * remove this type of call. + */ + if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.RlmtUpdatedFlag ++; + + /* + * Retrieve Value + */ + switch (Id) { + + case OID_SKGE_RLMT_MODE: + *pBuf = (char)pAC->Rlmt.Net[0].RlmtMode; + *pLen = sizeof(char); + break; + + case OID_SKGE_RLMT_PORT_NUMBER: + Val32 = (SK_U32)pAC->GIni.GIMacsFound; + SK_PNMI_STORE_U32(pBuf, Val32); + *pLen = sizeof(SK_U32); + break; + + case OID_SKGE_RLMT_PORT_ACTIVE: + *pBuf = 0; + /* + * If multiple ports may become active this OID + * doesn't make sense any more. A new variable in + * the port structure should be created. However, + * for this variable the first active port is + * returned. + */ + PhysPortMax = pAC->GIni.GIMacsFound; + + for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + *pBuf = (char)SK_PNMI_PORT_PHYS2LOG(PhysPortIndex); + break; + } + } + *pLen = sizeof(char); + break; + + case OID_SKGE_RLMT_PORT_PREFERRED: + *pBuf = (char)SK_PNMI_PORT_PHYS2LOG(pAC->Rlmt.Net[NetIndex].Preference); + *pLen = sizeof(char); + break; + + case OID_SKGE_RLMT_CHANGE_CTS: + Val64 = pAC->Pnmi.RlmtChangeCts; + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_CHANGE_TIME: + Val64 = pAC->Pnmi.RlmtChangeTime; + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_CHANGE_ESTIM: + Val64 = pAC->Pnmi.RlmtChangeEstimate.Estimate; + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_CHANGE_THRES: + Val64 = pAC->Pnmi.RlmtChangeThreshold; + SK_PNMI_STORE_U64(pBuf, Val64); + *pLen = sizeof(SK_U64); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("Rlmt: Unknown OID should be handled before")); + + pAC->Pnmi.RlmtUpdatedFlag --; + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + pAC->Pnmi.RlmtUpdatedFlag --; + } + else { + /* Perform a preset or set */ + switch (Id) { + + case OID_SKGE_RLMT_MODE: + /* Check if the buffer length is plausible */ + if (*pLen < sizeof(char)) { + + *pLen = sizeof(char); + return (SK_PNMI_ERR_TOO_SHORT); + } + /* Check if the value range is correct */ + if (*pLen != sizeof(char) || + (*pBuf & SK_PNMI_RLMT_MODE_CHK_LINK) == 0 || + *(SK_U8 *)pBuf > 15) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + *pLen = 0; + return (SK_PNMI_ERR_OK); + } + /* Send an event to RLMT to change the mode */ + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + EventParam.Para32[0] |= (SK_U32)(*pBuf); + EventParam.Para32[1] = 0; + if (SkRlmtEvent(pAC, IoC, SK_RLMT_MODE_CHANGE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR037, + SK_PNMI_ERR037MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + break; + + case OID_SKGE_RLMT_PORT_PREFERRED: + /* Check if the buffer length is plausible */ + if (*pLen < sizeof(char)) { + + *pLen = sizeof(char); + return (SK_PNMI_ERR_TOO_SHORT); + } + /* Check if the value range is correct */ + if (*pLen != sizeof(char) || *(SK_U8 *)pBuf > + (SK_U8)pAC->GIni.GIMacsFound) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + *pLen = 0; + return (SK_PNMI_ERR_OK); + } + + /* + * Send an event to RLMT change the preferred port. + * A param of -1 means automatic mode. RLMT will + * make the decision which is the preferred port. + */ + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + EventParam.Para32[0] = (SK_U32)(*pBuf) - 1; + EventParam.Para32[1] = NetIndex; + if (SkRlmtEvent(pAC, IoC, SK_RLMT_PREFPORT_CHANGE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR038, + SK_PNMI_ERR038MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + break; + + case OID_SKGE_RLMT_CHANGE_THRES: + /* Check if the buffer length is plausible */ + if (*pLen < sizeof(SK_U64)) { + + *pLen = sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + /* + * There are not many restrictions to the + * value range. + */ + if (*pLen != sizeof(SK_U64)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + /* A preset ends here */ + if (Action == SK_PNMI_PRESET) { + + *pLen = 0; + return (SK_PNMI_ERR_OK); + } + /* + * Store the new threshold, which will be taken + * on the next timer event. + */ + SK_PNMI_READ_U64(pBuf, Val64); + pAC->Pnmi.RlmtChangeThreshold = Val64; + break; + + default: + /* The other OIDs are not be able for set */ + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * RlmtStat - OID handler function of OID_SKGE_RLMT_XXX multiple instance. + * + * Description: + * Performs get requests on multiple instance variables. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int RlmtStat( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + unsigned int PhysPortMax; + unsigned int PhysPortIndex; + unsigned int Limit; + unsigned int Offset; + int Ret; + SK_U32 Val32; + SK_U64 Val64; + + /* + * Calculate the port indexes from the instance. + */ + PhysPortMax = pAC->GIni.GIMacsFound; + + if ((Instance != (SK_U32)(-1))) { + /* Check instance range */ + if ((Instance < 1) || (Instance > PhysPortMax)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + /* Single net mode */ + PhysPortIndex = Instance - 1; + + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + PhysPortIndex = NetIndex; + } + + /* Both net modes */ + Limit = PhysPortIndex + 1; + } + else { + /* Single net mode */ + PhysPortIndex = 0; + Limit = PhysPortMax; + + /* Dual net mode */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + PhysPortIndex = NetIndex; + Limit = PhysPortIndex + 1; + } + } + + /* + * Currently only get requests are allowed. + */ + if (Action != SK_PNMI_GET) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* + * Check if the buffer length is large enough. + */ + switch (Id) { + + case OID_SKGE_RLMT_PORT_INDEX: + case OID_SKGE_RLMT_STATUS: + if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U32)) { + + *pLen = (Limit - PhysPortIndex) * sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_RLMT_TX_HELLO_CTS: + case OID_SKGE_RLMT_RX_HELLO_CTS: + case OID_SKGE_RLMT_TX_SP_REQ_CTS: + case OID_SKGE_RLMT_RX_SP_CTS: + if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U64)) { + + *pLen = (Limit - PhysPortIndex) * sizeof(SK_U64); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR039, + SK_PNMI_ERR039MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + + } + + /* + * Update statistic and increment semaphores to indicate that + * an update was already done. + */ + if ((Ret = RlmtUpdate(pAC, IoC, NetIndex)) != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.RlmtUpdatedFlag ++; + + /* + * Get value + */ + Offset = 0; + for (; PhysPortIndex < Limit; PhysPortIndex ++) { + + switch (Id) { + + case OID_SKGE_RLMT_PORT_INDEX: + Val32 = PhysPortIndex; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_RLMT_STATUS: + if (pAC->Rlmt.Port[PhysPortIndex].PortState == + SK_RLMT_PS_INIT || + pAC->Rlmt.Port[PhysPortIndex].PortState == + SK_RLMT_PS_DOWN) { + + Val32 = SK_PNMI_RLMT_STATUS_ERROR; + } + else if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + Val32 = SK_PNMI_RLMT_STATUS_ACTIVE; + } + else { + Val32 = SK_PNMI_RLMT_STATUS_STANDBY; + } + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_RLMT_TX_HELLO_CTS: + Val64 = pAC->Rlmt.Port[PhysPortIndex].TxHelloCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_RX_HELLO_CTS: + Val64 = pAC->Rlmt.Port[PhysPortIndex].RxHelloCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_TX_SP_REQ_CTS: + Val64 = pAC->Rlmt.Port[PhysPortIndex].TxSpHelloReqCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + case OID_SKGE_RLMT_RX_SP_CTS: + Val64 = pAC->Rlmt.Port[PhysPortIndex].RxSpHelloCts; + SK_PNMI_STORE_U64(pBuf + Offset, Val64); + Offset += sizeof(SK_U64); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("RlmtStat: Unknown OID should be errored before")); + + pAC->Pnmi.RlmtUpdatedFlag --; + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + *pLen = Offset; + + pAC->Pnmi.RlmtUpdatedFlag --; + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * MacPrivateConf - OID handler function of OIDs concerning the configuration + * + * Description: + * Get/Presets/Sets the OIDs concerning the configuration. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int MacPrivateConf( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + unsigned int PhysPortMax; + unsigned int PhysPortIndex; + unsigned int LogPortMax; + unsigned int LogPortIndex; + unsigned int Limit; + unsigned int Offset; + char Val8; + char *pBufPtr; + int Ret; + SK_EVPARA EventParam; + SK_U32 Val32; + + /* + * Calculate instance if wished. MAC index 0 is the virtual MAC. + */ + PhysPortMax = pAC->GIni.GIMacsFound; + LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); + + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ + LogPortMax--; + } + + if ((Instance != (SK_U32)(-1))) { /* Only one specific instance is queried */ + /* Check instance range */ + if ((Instance < 1) || (Instance > LogPortMax)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + LogPortIndex = SK_PNMI_PORT_INST2LOG(Instance); + Limit = LogPortIndex + 1; + } + + else { /* Instance == (SK_U32)(-1), get all Instances of that OID */ + + LogPortIndex = 0; + Limit = LogPortMax; + } + + /* + * Perform action + */ + if (Action == SK_PNMI_GET) { + + /* Check length */ + switch (Id) { + + case OID_SKGE_PMD: + case OID_SKGE_CONNECTOR: + case OID_SKGE_LINK_CAP: + case OID_SKGE_LINK_MODE: + case OID_SKGE_LINK_MODE_STATUS: + case OID_SKGE_LINK_STATUS: + case OID_SKGE_FLOWCTRL_CAP: + case OID_SKGE_FLOWCTRL_MODE: + case OID_SKGE_FLOWCTRL_STATUS: + case OID_SKGE_PHY_OPERATION_CAP: + case OID_SKGE_PHY_OPERATION_MODE: + case OID_SKGE_PHY_OPERATION_STATUS: + case OID_SKGE_SPEED_CAP: + case OID_SKGE_SPEED_MODE: + case OID_SKGE_SPEED_STATUS: + if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U8)) { + + *pLen = (Limit - LogPortIndex) * sizeof(SK_U8); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_MTU: + case OID_SKGE_PHY_TYPE: + if (*pLen < (Limit - LogPortIndex) * sizeof(SK_U32)) { + + *pLen = (Limit - LogPortIndex) * sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR041, + SK_PNMI_ERR041MSG); + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Update statistic and increment semaphore to indicate + * that an update was already done. + */ + if ((Ret = SirqUpdate(pAC, IoC)) != SK_PNMI_ERR_OK) { + + *pLen = 0; + return (Ret); + } + pAC->Pnmi.SirqUpdatedFlag ++; + + /* + * Get value + */ + Offset = 0; + for (; LogPortIndex < Limit; LogPortIndex ++) { + + pBufPtr = pBuf + Offset; + + switch (Id) { + + case OID_SKGE_PMD: + *pBufPtr = pAC->Pnmi.PMD; + Offset += sizeof(char); + break; + + case OID_SKGE_CONNECTOR: + *pBufPtr = pAC->Pnmi.Connector; + Offset += sizeof(char); + break; + + case OID_SKGE_PHY_TYPE: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + continue; + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + Val32 = pAC->GIni.GP[PhysPortIndex].PhyType; + SK_PNMI_STORE_U32(pBufPtr, Val32); + } + } + else { /* DualNetMode */ + + Val32 = pAC->GIni.GP[NetIndex].PhyType; + SK_PNMI_STORE_U32(pBufPtr, Val32); + } + Offset += sizeof(SK_U32); + break; + + case OID_SKGE_LINK_CAP: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkCap; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PLinkCap; + } + Offset += sizeof(char); + break; + + case OID_SKGE_LINK_MODE: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkModeConf; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PLinkModeConf; + } + Offset += sizeof(char); + break; + + case OID_SKGE_LINK_MODE_STATUS: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = + CalculateLinkModeStatus(pAC, IoC, PhysPortIndex); + } + } + else { /* DualNetMode */ + + *pBufPtr = CalculateLinkModeStatus(pAC, IoC, NetIndex); + } + Offset += sizeof(char); + break; + + case OID_SKGE_LINK_STATUS: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = CalculateLinkStatus(pAC, IoC, PhysPortIndex); + } + } + else { /* DualNetMode */ + + *pBufPtr = CalculateLinkStatus(pAC, IoC, NetIndex); + } + Offset += sizeof(char); + break; + + case OID_SKGE_FLOWCTRL_CAP: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PFlowCtrlCap; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PFlowCtrlCap; + } + Offset += sizeof(char); + break; + + case OID_SKGE_FLOWCTRL_MODE: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PFlowCtrlMode; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PFlowCtrlMode; + } + Offset += sizeof(char); + break; + + case OID_SKGE_FLOWCTRL_STATUS: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PFlowCtrlStatus; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PFlowCtrlStatus; + } + Offset += sizeof(char); + break; + + case OID_SKGE_PHY_OPERATION_CAP: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PMSCap; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PMSCap; + } + Offset += sizeof(char); + break; + + case OID_SKGE_PHY_OPERATION_MODE: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PMSMode; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PMSMode; + } + Offset += sizeof(char); + break; + + case OID_SKGE_PHY_OPERATION_STATUS: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PMSStatus; + } + } + else { + + *pBufPtr = pAC->GIni.GP[NetIndex].PMSStatus; + } + Offset += sizeof(char); + break; + + case OID_SKGE_SPEED_CAP: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical ports */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkSpeedCap; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PLinkSpeedCap; + } + Offset += sizeof(char); + break; + + case OID_SKGE_SPEED_MODE: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkSpeed; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PLinkSpeed; + } + Offset += sizeof(char); + break; + + case OID_SKGE_SPEED_STATUS: + if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ + if (LogPortIndex == 0) { + /* Get value for virtual port */ + VirtualConf(pAC, IoC, Id, pBufPtr); + } + else { + /* Get value for physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + + *pBufPtr = pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed; + } + } + else { /* DualNetMode */ + + *pBufPtr = pAC->GIni.GP[NetIndex].PLinkSpeedUsed; + } + Offset += sizeof(char); + break; + + case OID_SKGE_MTU: + Val32 = SK_DRIVER_GET_MTU(pAC, IoC, NetIndex); + SK_PNMI_STORE_U32(pBufPtr, Val32); + Offset += sizeof(SK_U32); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("MacPrivateConf: Unknown OID should be handled before")); + + pAC->Pnmi.SirqUpdatedFlag --; + return (SK_PNMI_ERR_GENERAL); + } + } + *pLen = Offset; + pAC->Pnmi.SirqUpdatedFlag --; + + return (SK_PNMI_ERR_OK); + } + + /* + * From here SET or PRESET action. Check if the passed + * buffer length is plausible. + */ + switch (Id) { + + case OID_SKGE_LINK_MODE: + case OID_SKGE_FLOWCTRL_MODE: + case OID_SKGE_PHY_OPERATION_MODE: + case OID_SKGE_SPEED_MODE: + if (*pLen < Limit - LogPortIndex) { + + *pLen = Limit - LogPortIndex; + return (SK_PNMI_ERR_TOO_SHORT); + } + if (*pLen != Limit - LogPortIndex) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + break; + + case OID_SKGE_MTU: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + if (*pLen != sizeof(SK_U32)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* + * Perform preset or set + */ + Offset = 0; + for (; LogPortIndex < Limit; LogPortIndex ++) { + + switch (Id) { + + case OID_SKGE_LINK_MODE: + /* Check the value range */ + Val8 = *(pBuf + Offset); + if (Val8 == 0) { + + Offset += sizeof(char); + break; + } + if (Val8 < SK_LMODE_HALF || + (LogPortIndex != 0 && Val8 > SK_LMODE_AUTOSENSE) || + (LogPortIndex == 0 && Val8 > SK_LMODE_INDETERMINATED)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + if (LogPortIndex == 0) { + + /* + * The virtual port consists of all currently + * active ports. Find them and send an event + * with the new link mode to SIRQ. + */ + for (PhysPortIndex = 0; + PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (!pAC->Pnmi.Port[PhysPortIndex]. + ActiveFlag) { + + continue; + } + + EventParam.Para32[0] = PhysPortIndex; + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_LMODE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR043, + SK_PNMI_ERR043MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + } + else { + /* + * Send an event with the new link mode to + * the SIRQ module. + */ + EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, SK_HWEV_SET_LMODE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR043, + SK_PNMI_ERR043MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + Offset += sizeof(char); + break; + + case OID_SKGE_FLOWCTRL_MODE: + /* Check the value range */ + Val8 = *(pBuf + Offset); + if (Val8 == 0) { + + Offset += sizeof(char); + break; + } + if (Val8 < SK_FLOW_MODE_NONE || + (LogPortIndex != 0 && Val8 > SK_FLOW_MODE_SYM_OR_REM) || + (LogPortIndex == 0 && Val8 > SK_FLOW_MODE_INDETERMINATED)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + if (LogPortIndex == 0) { + + /* + * The virtual port consists of all currently + * active ports. Find them and send an event + * with the new flow control mode to SIRQ. + */ + for (PhysPortIndex = 0; + PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (!pAC->Pnmi.Port[PhysPortIndex]. + ActiveFlag) { + + continue; + } + + EventParam.Para32[0] = PhysPortIndex; + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_FLOWMODE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR044, + SK_PNMI_ERR044MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + } + else { + /* + * Send an event with the new flow control + * mode to the SIRQ module. + */ + EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_FLOWMODE, EventParam) + > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR044, + SK_PNMI_ERR044MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + Offset += sizeof(char); + break; + + case OID_SKGE_PHY_OPERATION_MODE : + /* Check the value range */ + Val8 = *(pBuf + Offset); + if (Val8 == 0) { + /* mode of this port remains unchanged */ + Offset += sizeof(char); + break; + } + if (Val8 < SK_MS_MODE_AUTO || + (LogPortIndex != 0 && Val8 > SK_MS_MODE_SLAVE) || + (LogPortIndex == 0 && Val8 > SK_MS_MODE_INDETERMINATED)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + if (LogPortIndex == 0) { + + /* + * The virtual port consists of all currently + * active ports. Find them and send an event + * with new master/slave (role) mode to SIRQ. + */ + for (PhysPortIndex = 0; + PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (!pAC->Pnmi.Port[PhysPortIndex]. + ActiveFlag) { + + continue; + } + + EventParam.Para32[0] = PhysPortIndex; + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_ROLE, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR042, + SK_PNMI_ERR042MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + } + else { + /* + * Send an event with the new master/slave + * (role) mode to the SIRQ module. + */ + EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_ROLE, EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR042, + SK_PNMI_ERR042MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + + Offset += sizeof(char); + break; + + case OID_SKGE_SPEED_MODE: + /* Check the value range */ + Val8 = *(pBuf + Offset); + if (Val8 == 0) { + + Offset += sizeof(char); + break; + } + if (Val8 < (SK_LSPEED_AUTO) || + (LogPortIndex != 0 && Val8 > (SK_LSPEED_1000MBPS)) || + (LogPortIndex == 0 && Val8 > (SK_LSPEED_INDETERMINATED))) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + + return (SK_PNMI_ERR_OK); + } + + if (LogPortIndex == 0) { + + /* + * The virtual port consists of all currently + * active ports. Find them and send an event + * with the new flow control mode to SIRQ. + */ + for (PhysPortIndex = 0; + PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + continue; + } + + EventParam.Para32[0] = PhysPortIndex; + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_SPEED, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR045, + SK_PNMI_ERR045MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + } + else { + /* + * Send an event with the new flow control + * mode to the SIRQ module. + */ + EventParam.Para32[0] = SK_PNMI_PORT_LOG2PHYS( + pAC, LogPortIndex); + EventParam.Para32[1] = (SK_U32)Val8; + if (SkGeSirqEvent(pAC, IoC, + SK_HWEV_SET_SPEED, + EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, + SK_PNMI_ERR045, + SK_PNMI_ERR045MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + Offset += sizeof(char); + break; + + case OID_SKGE_MTU : + /* Check the value range */ + Val32 = *(SK_U32*)(pBuf + Offset); + if (Val32 == 0) { + /* mtu of this port remains unchanged */ + Offset += sizeof(SK_U32); + break; + } + if (SK_DRIVER_PRESET_MTU(pAC, IoC, NetIndex, Val32) != 0) { + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + /* The preset ends here */ + if (Action == SK_PNMI_PRESET) { + return (SK_PNMI_ERR_OK); + } + + if (SK_DRIVER_SET_MTU(pAC, IoC, NetIndex, Val32) != 0) { + return (SK_PNMI_ERR_GENERAL); + } + + Offset += sizeof(SK_U32); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("MacPrivateConf: Unknown OID should be handled before set")); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * Monitor - OID handler function for RLMT_MONITOR_XXX + * + * Description: + * Because RLMT currently does not support the monitoring of + * remote adapter cards, we return always an empty table. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_BAD_VALUE The passed value is not in the valid + * value range. + * SK_PNMI_ERR_READ_ONLY The OID is read-only and cannot be set. + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +PNMI_STATIC int Monitor( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + unsigned int Index; + unsigned int Limit; + unsigned int Offset; + unsigned int Entries; + + + /* + * Calculate instance if wished. + */ + /* XXX Not yet implemented. Return always an empty table. */ + Entries = 0; + + if ((Instance != (SK_U32)(-1))) { + + if ((Instance < 1) || (Instance > Entries)) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + Index = (unsigned int)Instance - 1; + Limit = (unsigned int)Instance; + } + else { + Index = 0; + Limit = Entries; + } + + /* + * Get/Set value + */ + if (Action == SK_PNMI_GET) { + + for (Offset=0; Index < Limit; Index ++) { + + switch (Id) { + + case OID_SKGE_RLMT_MONITOR_INDEX: + case OID_SKGE_RLMT_MONITOR_ADDR: + case OID_SKGE_RLMT_MONITOR_ERRS: + case OID_SKGE_RLMT_MONITOR_TIMESTAMP: + case OID_SKGE_RLMT_MONITOR_ADMIN: + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR046, + SK_PNMI_ERR046MSG); + + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } + *pLen = Offset; + } + else { + /* Only MONITOR_ADMIN can be set */ + if (Id != OID_SKGE_RLMT_MONITOR_ADMIN) { + + *pLen = 0; + return (SK_PNMI_ERR_READ_ONLY); + } + + /* Check if the length is plausible */ + if (*pLen < (Limit - Index)) { + + return (SK_PNMI_ERR_TOO_SHORT); + } + /* Okay, we have a wide value range */ + if (*pLen != (Limit - Index)) { + + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } +/* + for (Offset=0; Index < Limit; Index ++) { + } +*/ +/* + * XXX Not yet implemented. Return always BAD_VALUE, because the table + * is empty. + */ + *pLen = 0; + return (SK_PNMI_ERR_BAD_VALUE); + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * VirtualConf - Calculates the values of configuration OIDs for virtual port + * + * Description: + * We handle here the get of the configuration group OIDs, which are + * a little bit complicated. The virtual port consists of all currently + * active physical ports. If multiple ports are active and configured + * differently we get in some trouble to return a single value. So we + * get the value of the first active port and compare it with that of + * the other active ports. If they are not the same, we return a value + * that indicates that the state is indeterminated. + * + * Returns: + * Nothing + */ +PNMI_STATIC void VirtualConf( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf) /* Buffer used for the management data transfer */ +{ + unsigned int PhysPortMax; + unsigned int PhysPortIndex; + SK_U8 Val8; + SK_U32 Val32; + SK_BOOL PortActiveFlag; + SK_GEPORT *pPrt; + + *pBuf = 0; + PortActiveFlag = SK_FALSE; + PhysPortMax = pAC->GIni.GIMacsFound; + + for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + pPrt = &pAC->GIni.GP[PhysPortIndex]; + + /* Check if the physical port is active */ + if (!pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + continue; + } + + PortActiveFlag = SK_TRUE; + + switch (Id) { + + case OID_SKGE_PHY_TYPE: + /* Check if it is the first active port */ + if (*pBuf == 0) { + Val32 = pPrt->PhyType; + SK_PNMI_STORE_U32(pBuf, Val32); + continue; + } + + case OID_SKGE_LINK_CAP: + + /* + * Different capabilities should not happen, but + * in the case of the cases OR them all together. + * From a curious point of view the virtual port + * is capable of all found capabilities. + */ + *pBuf |= pPrt->PLinkCap; + break; + + case OID_SKGE_LINK_MODE: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PLinkModeConf; + continue; + } + + /* + * If we find an active port with a different link + * mode than the first one we return a value that + * indicates that the link mode is indeterminated. + */ + if (*pBuf != pPrt->PLinkModeConf) { + + *pBuf = SK_LMODE_INDETERMINATED; + } + break; + + case OID_SKGE_LINK_MODE_STATUS: + /* Get the link mode of the physical port */ + Val8 = CalculateLinkModeStatus(pAC, IoC, PhysPortIndex); + + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = Val8; + continue; + } + + /* + * If we find an active port with a different link + * mode status than the first one we return a value + * that indicates that the link mode status is + * indeterminated. + */ + if (*pBuf != Val8) { + + *pBuf = SK_LMODE_STAT_INDETERMINATED; + } + break; + + case OID_SKGE_LINK_STATUS: + /* Get the link status of the physical port */ + Val8 = CalculateLinkStatus(pAC, IoC, PhysPortIndex); + + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = Val8; + continue; + } + + /* + * If we find an active port with a different link + * status than the first one, we return a value + * that indicates that the link status is + * indeterminated. + */ + if (*pBuf != Val8) { + + *pBuf = SK_PNMI_RLMT_LSTAT_INDETERMINATED; + } + break; + + case OID_SKGE_FLOWCTRL_CAP: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PFlowCtrlCap; + continue; + } + + /* + * From a curious point of view the virtual port + * is capable of all found capabilities. + */ + *pBuf |= pPrt->PFlowCtrlCap; + break; + + case OID_SKGE_FLOWCTRL_MODE: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PFlowCtrlMode; + continue; + } + + /* + * If we find an active port with a different flow + * control mode than the first one, we return a value + * that indicates that the mode is indeterminated. + */ + if (*pBuf != pPrt->PFlowCtrlMode) { + + *pBuf = SK_FLOW_MODE_INDETERMINATED; + } + break; + + case OID_SKGE_FLOWCTRL_STATUS: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PFlowCtrlStatus; + continue; + } + + /* + * If we find an active port with a different flow + * control status than the first one, we return a + * value that indicates that the status is + * indeterminated. + */ + if (*pBuf != pPrt->PFlowCtrlStatus) { + + *pBuf = SK_FLOW_STAT_INDETERMINATED; + } + break; + + case OID_SKGE_PHY_OPERATION_CAP: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PMSCap; + continue; + } + + /* + * From a curious point of view the virtual port + * is capable of all found capabilities. + */ + *pBuf |= pPrt->PMSCap; + break; + + case OID_SKGE_PHY_OPERATION_MODE: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PMSMode; + continue; + } + + /* + * If we find an active port with a different master/ + * slave mode than the first one, we return a value + * that indicates that the mode is indeterminated. + */ + if (*pBuf != pPrt->PMSMode) { + + *pBuf = SK_MS_MODE_INDETERMINATED; + } + break; + + case OID_SKGE_PHY_OPERATION_STATUS: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PMSStatus; + continue; + } + + /* + * If we find an active port with a different master/ + * slave status than the first one, we return a + * value that indicates that the status is + * indeterminated. + */ + if (*pBuf != pPrt->PMSStatus) { + + *pBuf = SK_MS_STAT_INDETERMINATED; + } + break; + + case OID_SKGE_SPEED_MODE: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PLinkSpeed; + continue; + } + + /* + * If we find an active port with a different flow + * control mode than the first one, we return a value + * that indicates that the mode is indeterminated. + */ + if (*pBuf != pPrt->PLinkSpeed) { + + *pBuf = SK_LSPEED_INDETERMINATED; + } + break; + + case OID_SKGE_SPEED_STATUS: + /* Check if it is the first active port */ + if (*pBuf == 0) { + + *pBuf = pPrt->PLinkSpeedUsed; + continue; + } + + /* + * If we find an active port with a different flow + * control status than the first one, we return a + * value that indicates that the status is + * indeterminated. + */ + if (*pBuf != pPrt->PLinkSpeedUsed) { + + *pBuf = SK_LSPEED_STAT_INDETERMINATED; + } + break; + } + } + + /* + * If no port is active return an indeterminated answer + */ + if (!PortActiveFlag) { + + switch (Id) { + + case OID_SKGE_LINK_CAP: + *pBuf = SK_LMODE_CAP_INDETERMINATED; + break; + + case OID_SKGE_LINK_MODE: + *pBuf = SK_LMODE_INDETERMINATED; + break; + + case OID_SKGE_LINK_MODE_STATUS: + *pBuf = SK_LMODE_STAT_INDETERMINATED; + break; + + case OID_SKGE_LINK_STATUS: + *pBuf = SK_PNMI_RLMT_LSTAT_INDETERMINATED; + break; + + case OID_SKGE_FLOWCTRL_CAP: + case OID_SKGE_FLOWCTRL_MODE: + *pBuf = SK_FLOW_MODE_INDETERMINATED; + break; + + case OID_SKGE_FLOWCTRL_STATUS: + *pBuf = SK_FLOW_STAT_INDETERMINATED; + break; + + case OID_SKGE_PHY_OPERATION_CAP: + *pBuf = SK_MS_CAP_INDETERMINATED; + break; + + case OID_SKGE_PHY_OPERATION_MODE: + *pBuf = SK_MS_MODE_INDETERMINATED; + break; + + case OID_SKGE_PHY_OPERATION_STATUS: + *pBuf = SK_MS_STAT_INDETERMINATED; + break; + case OID_SKGE_SPEED_CAP: + *pBuf = SK_LSPEED_CAP_INDETERMINATED; + break; + + case OID_SKGE_SPEED_MODE: + *pBuf = SK_LSPEED_INDETERMINATED; + break; + + case OID_SKGE_SPEED_STATUS: + *pBuf = SK_LSPEED_STAT_INDETERMINATED; + break; + } + } +} + +/***************************************************************************** + * + * CalculateLinkStatus - Determins the link status of a physical port + * + * Description: + * Determins the link status the following way: + * LSTAT_PHY_DOWN: Link is down + * LSTAT_AUTONEG: Auto-negotiation failed + * LSTAT_LOG_DOWN: Link is up but RLMT did not yet put the port + * logically up. + * LSTAT_LOG_UP: RLMT marked the port as up + * + * Returns: + * Link status of physical port + */ +PNMI_STATIC SK_U8 CalculateLinkStatus( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +unsigned int PhysPortIndex) /* Physical port index */ +{ + SK_U8 Result; + + if (!pAC->GIni.GP[PhysPortIndex].PHWLinkUp) { + + Result = SK_PNMI_RLMT_LSTAT_PHY_DOWN; + } + else if (pAC->GIni.GP[PhysPortIndex].PAutoNegFail > 0) { + + Result = SK_PNMI_RLMT_LSTAT_AUTONEG; + } + else if (!pAC->Rlmt.Port[PhysPortIndex].PortDown) { + + Result = SK_PNMI_RLMT_LSTAT_LOG_UP; + } + else { + Result = SK_PNMI_RLMT_LSTAT_LOG_DOWN; + } + + return (Result); +} + +/***************************************************************************** + * + * CalculateLinkModeStatus - Determins the link mode status of a phys. port + * + * Description: + * The COMMON module only tells us if the mode is half or full duplex. + * But in the decade of auto sensing it is useful for the user to + * know if the mode was negotiated or forced. Therefore we have a + * look to the mode, which was last used by the negotiation process. + * + * Returns: + * The link mode status + */ +PNMI_STATIC SK_U8 CalculateLinkModeStatus( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +unsigned int PhysPortIndex) /* Physical port index */ +{ + SK_U8 Result; + + /* Get the current mode, which can be full or half duplex */ + Result = pAC->GIni.GP[PhysPortIndex].PLinkModeStatus; + + /* Check if no valid mode could be found (link is down) */ + if (Result < SK_LMODE_STAT_HALF) { + + Result = SK_LMODE_STAT_UNKNOWN; + } + else if (pAC->GIni.GP[PhysPortIndex].PLinkMode >= SK_LMODE_AUTOHALF) { + + /* + * Auto-negotiation was used to bring up the link. Change + * the already found duplex status that it indicates + * auto-negotiation was involved. + */ + if (Result == SK_LMODE_STAT_HALF) { + + Result = SK_LMODE_STAT_AUTOHALF; + } + else if (Result == SK_LMODE_STAT_FULL) { + + Result = SK_LMODE_STAT_AUTOFULL; + } + } + + return (Result); +} + +/***************************************************************************** + * + * GetVpdKeyArr - Obtain an array of VPD keys + * + * Description: + * Read the VPD keys and build an array of VPD keys, which are + * easy to access. + * + * Returns: + * SK_PNMI_ERR_OK Task successfully performed. + * SK_PNMI_ERR_GENERAL Something went wrong. + */ +PNMI_STATIC int GetVpdKeyArr( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +char *pKeyArr, /* Ptr KeyArray */ +unsigned int KeyArrLen, /* Length of array in bytes */ +unsigned int *pKeyNo) /* Number of keys */ +{ + unsigned int BufKeysLen = SK_PNMI_VPD_BUFSIZE; + char BufKeys[SK_PNMI_VPD_BUFSIZE]; + unsigned int StartOffset; + unsigned int Offset; + int Index; + int Ret; + + + SK_MEMSET(pKeyArr, 0, KeyArrLen); + + /* + * Get VPD key list + */ + Ret = VpdKeys(pAC, IoC, (char *)&BufKeys, (int *)&BufKeysLen, + (int *)pKeyNo); + if (Ret > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR014, + SK_PNMI_ERR014MSG); + + return (SK_PNMI_ERR_GENERAL); + } + /* If no keys are available return now */ + if (*pKeyNo == 0 || BufKeysLen == 0) { + + return (SK_PNMI_ERR_OK); + } + /* + * If the key list is too long for us trunc it and give a + * errorlog notification. This case should not happen because + * the maximum number of keys is limited due to RAM limitations + */ + if (*pKeyNo > SK_PNMI_VPD_ENTRIES) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR015, + SK_PNMI_ERR015MSG); + + *pKeyNo = SK_PNMI_VPD_ENTRIES; + } + + /* + * Now build an array of fixed string length size and copy + * the keys together. + */ + for (Index = 0, StartOffset = 0, Offset = 0; Offset < BufKeysLen; + Offset ++) { + + if (BufKeys[Offset] != 0) { + + continue; + } + + if (Offset - StartOffset > SK_PNMI_VPD_KEY_SIZE) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR016, + SK_PNMI_ERR016MSG); + return (SK_PNMI_ERR_GENERAL); + } + + SK_STRNCPY(pKeyArr + Index * SK_PNMI_VPD_KEY_SIZE, + &BufKeys[StartOffset], SK_PNMI_VPD_KEY_SIZE); + + Index ++; + StartOffset = Offset + 1; + } + + /* Last key not zero terminated? Get it anyway */ + if (StartOffset < Offset) { + + SK_STRNCPY(pKeyArr + Index * SK_PNMI_VPD_KEY_SIZE, + &BufKeys[StartOffset], SK_PNMI_VPD_KEY_SIZE); + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * SirqUpdate - Let the SIRQ update its internal values + * + * Description: + * Just to be sure that the SIRQ module holds its internal data + * structures up to date, we send an update event before we make + * any access. + * + * Returns: + * SK_PNMI_ERR_OK Task successfully performed. + * SK_PNMI_ERR_GENERAL Something went wrong. + */ +PNMI_STATIC int SirqUpdate( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC) /* IO context handle */ +{ + SK_EVPARA EventParam; + + + /* Was the module already updated during the current PNMI call? */ + if (pAC->Pnmi.SirqUpdatedFlag > 0) { + + return (SK_PNMI_ERR_OK); + } + + /* Send an synchronuous update event to the module */ + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + if (SkGeSirqEvent(pAC, IoC, SK_HWEV_UPDATE_STAT, EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR047, + SK_PNMI_ERR047MSG); + + return (SK_PNMI_ERR_GENERAL); + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * RlmtUpdate - Let the RLMT update its internal values + * + * Description: + * Just to be sure that the RLMT module holds its internal data + * structures up to date, we send an update event before we make + * any access. + * + * Returns: + * SK_PNMI_ERR_OK Task successfully performed. + * SK_PNMI_ERR_GENERAL Something went wrong. + */ +PNMI_STATIC int RlmtUpdate( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + SK_EVPARA EventParam; + + + /* Was the module already updated during the current PNMI call? */ + if (pAC->Pnmi.RlmtUpdatedFlag > 0) { + + return (SK_PNMI_ERR_OK); + } + + /* Send an synchronuous update event to the module */ + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + EventParam.Para32[0] = NetIndex; + EventParam.Para32[1] = (SK_U32)-1; + if (SkRlmtEvent(pAC, IoC, SK_RLMT_STATS_UPDATE, EventParam) > 0) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR048, + SK_PNMI_ERR048MSG); + + return (SK_PNMI_ERR_GENERAL); + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * MacUpdate - Force the XMAC to output the current statistic + * + * Description: + * The XMAC holds its statistic internally. To obtain the current + * values we must send a command so that the statistic data will + * be written to a predefined memory area on the adapter. + * + * Returns: + * SK_PNMI_ERR_OK Task successfully performed. + * SK_PNMI_ERR_GENERAL Something went wrong. + */ +PNMI_STATIC int MacUpdate( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +unsigned int FirstMac, /* Index of the first Mac to be updated */ +unsigned int LastMac) /* Index of the last Mac to be updated */ +{ + unsigned int MacIndex; + + /* + * Were the statistics already updated during the + * current PNMI call? + */ + if (pAC->Pnmi.MacUpdatedFlag > 0) { + + return (SK_PNMI_ERR_OK); + } + + /* Send an update command to all MACs specified */ + for (MacIndex = FirstMac; MacIndex <= LastMac; MacIndex ++) { + + /* + * 2002-09-13 pweber: Freeze the current SW counters. + * (That should be done as close as + * possible to the update of the + * HW counters) + */ + if (pAC->GIni.GIMacType == SK_MAC_XMAC) { + pAC->Pnmi.BufPort[MacIndex] = pAC->Pnmi.Port[MacIndex]; + } + + /* 2002-09-13 pweber: Update the HW counter */ + if (pAC->GIni.GIFunc.pFnMacUpdateStats(pAC, IoC, MacIndex) != 0) { + + return (SK_PNMI_ERR_GENERAL); + } + } + + return (SK_PNMI_ERR_OK); +} + +/***************************************************************************** + * + * GetStatVal - Retrieve an XMAC statistic counter + * + * Description: + * Retrieves the statistic counter of a virtual or physical port. The + * virtual port is identified by the index 0. It consists of all + * currently active ports. To obtain the counter value for this port + * we must add the statistic counter of all active ports. To grant + * continuous counter values for the virtual port even when port + * switches occur we must additionally add a delta value, which was + * calculated during a SK_PNMI_EVT_RLMT_ACTIVE_UP event. + * + * Returns: + * Requested statistic value + */ +PNMI_STATIC SK_U64 GetStatVal( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +unsigned int LogPortIndex, /* Index of the logical Port to be processed */ +unsigned int StatIndex, /* Index to statistic value */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + unsigned int PhysPortIndex; + unsigned int PhysPortMax; + SK_U64 Val = 0; + + + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { /* Dual net mode */ + + PhysPortIndex = NetIndex; + + Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex); + } + else { /* Single Net mode */ + + if (LogPortIndex == 0) { + + PhysPortMax = pAC->GIni.GIMacsFound; + + /* Add counter of all active ports */ + for (PhysPortIndex = 0; PhysPortIndex < PhysPortMax; + PhysPortIndex ++) { + + if (pAC->Pnmi.Port[PhysPortIndex].ActiveFlag) { + + Val += GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex); + } + } + + /* Correct value because of port switches */ + Val += pAC->Pnmi.VirtualCounterOffset[StatIndex]; + } + else { + /* Get counter value of physical port */ + PhysPortIndex = SK_PNMI_PORT_LOG2PHYS(pAC, LogPortIndex); + + Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, StatIndex); + } + } + return (Val); +} + +/***************************************************************************** + * + * GetPhysStatVal - Get counter value for physical port + * + * Description: + * Builds a 64bit counter value. Except for the octet counters + * the lower 32bit are counted in hardware and the upper 32bit + * in software by monitoring counter overflow interrupts in the + * event handler. To grant continous counter values during XMAC + * resets (caused by a workaround) we must add a delta value. + * The delta was calculated in the event handler when a + * SK_PNMI_EVT_XMAC_RESET was received. + * + * Returns: + * Counter value + */ +PNMI_STATIC SK_U64 GetPhysStatVal( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +unsigned int PhysPortIndex, /* Index of the logical Port to be processed */ +unsigned int StatIndex) /* Index to statistic value */ +{ + SK_U64 Val = 0; + SK_U32 LowVal = 0; + SK_U32 HighVal = 0; + SK_U16 Word; + int MacType; + unsigned int HelpIndex; + SK_GEPORT *pPrt; + + SK_PNMI_PORT *pPnmiPrt; + SK_GEMACFUNC *pFnMac; + + pPrt = &pAC->GIni.GP[PhysPortIndex]; + + MacType = pAC->GIni.GIMacType; + + /* 2002-09-17 pweber: For XMAC, use the frozen SW counters (BufPort) */ + if (MacType == SK_MAC_XMAC) { + pPnmiPrt = &pAC->Pnmi.BufPort[PhysPortIndex]; + } + else { + pPnmiPrt = &pAC->Pnmi.Port[PhysPortIndex]; + } + + pFnMac = &pAC->GIni.GIFunc; + + switch (StatIndex) { + case SK_PNMI_HTX: + if (MacType == SK_MAC_GMAC) { + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[SK_PNMI_HTX_BROADCAST][MacType].Reg, + &LowVal); + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[SK_PNMI_HTX_MULTICAST][MacType].Reg, + &HighVal); + LowVal += HighVal; + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[SK_PNMI_HTX_UNICAST][MacType].Reg, + &HighVal); + LowVal += HighVal; + } + else { + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + } + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HRX: + if (MacType == SK_MAC_GMAC) { + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[SK_PNMI_HRX_BROADCAST][MacType].Reg, + &LowVal); + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[SK_PNMI_HRX_MULTICAST][MacType].Reg, + &HighVal); + LowVal += HighVal; + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[SK_PNMI_HRX_UNICAST][MacType].Reg, + &HighVal); + LowVal += HighVal; + } + else { + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + } + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HTX_OCTET: + case SK_PNMI_HRX_OCTET: + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &HighVal); + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex + 1][MacType].Reg, + &LowVal); + break; + + case SK_PNMI_HTX_BURST: + case SK_PNMI_HTX_EXCESS_DEF: + case SK_PNMI_HTX_CARRIER: + /* Not supported by GMAC */ + if (MacType == SK_MAC_GMAC) { + return (Val); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HTX_MACC: + /* GMAC only supports PAUSE MAC control frames */ + if (MacType == SK_MAC_GMAC) { + HelpIndex = SK_PNMI_HTX_PMACC; + } + else { + HelpIndex = StatIndex; + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[HelpIndex][MacType].Reg, + &LowVal); + + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HTX_COL: + case SK_PNMI_HRX_UNDERSIZE: + /* Not supported by XMAC */ + if (MacType == SK_MAC_XMAC) { + return (Val); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HTX_DEFFERAL: + /* Not supported by GMAC */ + if (MacType == SK_MAC_GMAC) { + return (Val); + } + + /* + * XMAC counts frames with deferred transmission + * even in full-duplex mode. + * + * In full-duplex mode the counter remains constant! + */ + if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL) || + (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL)) { + + LowVal = 0; + HighVal = 0; + } + else { + /* Otherwise get contents of hardware register */ + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + } + break; + + case SK_PNMI_HRX_BADOCTET: + /* Not supported by XMAC */ + if (MacType == SK_MAC_XMAC) { + return (Val); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &HighVal); + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex + 1][MacType].Reg, + &LowVal); + break; + + case SK_PNMI_HTX_OCTETLOW: + case SK_PNMI_HRX_OCTETLOW: + case SK_PNMI_HRX_BADOCTETLOW: + return (Val); + + case SK_PNMI_HRX_LONGFRAMES: + /* For XMAC the SW counter is managed by PNMI */ + if (MacType == SK_MAC_XMAC) { + return (pPnmiPrt->StatRxLongFrameCts); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HRX_TOO_LONG: + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + + Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal); + + if (MacType == SK_MAC_GMAC) { + /* For GMAC the SW counter is additionally managed by PNMI */ + Val += pPnmiPrt->StatRxFrameTooLongCts; + } + else { + /* + * Frames longer than IEEE 802.3 frame max size are counted + * by XMAC in frame_too_long counter even reception of long + * frames was enabled and the frame was correct. + * So correct the value by subtracting RxLongFrame counter. + */ + Val -= pPnmiPrt->StatRxLongFrameCts; + } + + LowVal = (SK_U32)Val; + HighVal = (SK_U32)(Val >> 32); + break; + + case SK_PNMI_HRX_SHORTS: + /* Not supported by GMAC */ + if (MacType == SK_MAC_GMAC) { + /* GM_RXE_FRAG?? */ + return (Val); + } + + /* + * XMAC counts short frame errors even if link down (#10620) + * + * If link-down the counter remains constant + */ + if (pPrt->PLinkModeStatus != SK_LMODE_STAT_UNKNOWN) { + + /* Otherwise get incremental difference */ + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + + Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal); + Val -= pPnmiPrt->RxShortZeroMark; + + LowVal = (SK_U32)Val; + HighVal = (SK_U32)(Val >> 32); + } + break; + + case SK_PNMI_HRX_MACC: + case SK_PNMI_HRX_MACC_UNKWN: + case SK_PNMI_HRX_BURST: + case SK_PNMI_HRX_MISSED: + case SK_PNMI_HRX_FRAMING: + case SK_PNMI_HRX_CARRIER: + case SK_PNMI_HRX_IRLENGTH: + case SK_PNMI_HRX_SYMBOL: + case SK_PNMI_HRX_CEXT: + /* Not supported by GMAC */ + if (MacType == SK_MAC_GMAC) { + return (Val); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + case SK_PNMI_HRX_PMACC_ERR: + /* For GMAC the SW counter is managed by PNMI */ + if (MacType == SK_MAC_GMAC) { + return (pPnmiPrt->StatRxPMaccErr); + } + + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + + /* SW counter managed by PNMI */ + case SK_PNMI_HTX_SYNC: + LowVal = (SK_U32)pPnmiPrt->StatSyncCts; + HighVal = (SK_U32)(pPnmiPrt->StatSyncCts >> 32); + break; + + /* SW counter managed by PNMI */ + case SK_PNMI_HTX_SYNC_OCTET: + LowVal = (SK_U32)pPnmiPrt->StatSyncOctetsCts; + HighVal = (SK_U32)(pPnmiPrt->StatSyncOctetsCts >> 32); + break; + + case SK_PNMI_HRX_FCS: + /* + * Broadcom filters FCS errors and counts it in + * Receive Error Counter register + */ + if (pPrt->PhyType == SK_PHY_BCOM) { + /* do not read while not initialized (PHY_READ hangs!)*/ + if (pPrt->PState != SK_PRT_RESET) { + SkXmPhyRead(pAC, IoC, PhysPortIndex, PHY_BCOM_RE_CTR, &Word); + + LowVal = Word; + } + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + } + else { + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + } + break; + + default: + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, + StatAddr[StatIndex][MacType].Reg, + &LowVal); + HighVal = pPnmiPrt->CounterHigh[StatIndex]; + break; + } + + Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal); + + /* Correct value because of possible XMAC reset. XMAC Errata #2 */ + Val += pPnmiPrt->CounterOffset[StatIndex]; + + return (Val); +} + +/***************************************************************************** + * + * ResetCounter - Set all counters and timestamps to zero + * + * Description: + * Notifies other common modules which store statistic data to + * reset their counters and finally reset our own counters. + * + * Returns: + * Nothing + */ +PNMI_STATIC void ResetCounter( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +SK_U32 NetIndex) +{ + unsigned int PhysPortIndex; + SK_EVPARA EventParam; + + + SK_MEMSET((char *)&EventParam, 0, sizeof(EventParam)); + + /* Notify sensor module */ + SkEventQueue(pAC, SKGE_I2C, SK_I2CEV_CLEAR, EventParam); + + /* Notify RLMT module */ + EventParam.Para32[0] = NetIndex; + EventParam.Para32[1] = (SK_U32)-1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STATS_CLEAR, EventParam); + EventParam.Para32[1] = 0; + + /* Notify SIRQ module */ + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_CLEAR_STAT, EventParam); + + /* Notify CSUM module */ +#ifdef SK_USE_CSUM + EventParam.Para32[0] = NetIndex; + EventParam.Para32[1] = (SK_U32)-1; + SkEventQueue(pAC, SKGE_CSUM, SK_CSUM_EVENT_CLEAR_PROTO_STATS, + EventParam); +#endif /* SK_USE_CSUM */ + + /* Clear XMAC statistic */ + for (PhysPortIndex = 0; PhysPortIndex < + (unsigned int)pAC->GIni.GIMacsFound; PhysPortIndex ++) { + + (void)pAC->GIni.GIFunc.pFnMacResetCounter(pAC, IoC, PhysPortIndex); + + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].CounterHigh, + 0, sizeof(pAC->Pnmi.Port[PhysPortIndex].CounterHigh)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. + CounterOffset, 0, sizeof(pAC->Pnmi.Port[ + PhysPortIndex].CounterOffset)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex].StatSyncCts, + 0, sizeof(pAC->Pnmi.Port[PhysPortIndex].StatSyncCts)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. + StatSyncOctetsCts, 0, sizeof(pAC->Pnmi.Port[ + PhysPortIndex].StatSyncOctetsCts)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. + StatRxLongFrameCts, 0, sizeof(pAC->Pnmi.Port[ + PhysPortIndex].StatRxLongFrameCts)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. + StatRxFrameTooLongCts, 0, sizeof(pAC->Pnmi.Port[ + PhysPortIndex].StatRxFrameTooLongCts)); + SK_MEMSET((char *)&pAC->Pnmi.Port[PhysPortIndex]. + StatRxPMaccErr, 0, sizeof(pAC->Pnmi.Port[ + PhysPortIndex].StatRxPMaccErr)); + } + + /* + * Clear local statistics + */ + SK_MEMSET((char *)&pAC->Pnmi.VirtualCounterOffset, 0, + sizeof(pAC->Pnmi.VirtualCounterOffset)); + pAC->Pnmi.RlmtChangeCts = 0; + pAC->Pnmi.RlmtChangeTime = 0; + SK_MEMSET((char *)&pAC->Pnmi.RlmtChangeEstimate.EstValue[0], 0, + sizeof(pAC->Pnmi.RlmtChangeEstimate.EstValue)); + pAC->Pnmi.RlmtChangeEstimate.EstValueIndex = 0; + pAC->Pnmi.RlmtChangeEstimate.Estimate = 0; + pAC->Pnmi.Port[NetIndex].TxSwQueueMax = 0; + pAC->Pnmi.Port[NetIndex].TxRetryCts = 0; + pAC->Pnmi.Port[NetIndex].RxIntrCts = 0; + pAC->Pnmi.Port[NetIndex].TxIntrCts = 0; + pAC->Pnmi.Port[NetIndex].RxNoBufCts = 0; + pAC->Pnmi.Port[NetIndex].TxNoBufCts = 0; + pAC->Pnmi.Port[NetIndex].TxUsedDescrNo = 0; + pAC->Pnmi.Port[NetIndex].RxDeliveredCts = 0; + pAC->Pnmi.Port[NetIndex].RxOctetsDeliveredCts = 0; + pAC->Pnmi.Port[NetIndex].ErrRecoveryCts = 0; +} + +/***************************************************************************** + * + * GetTrapEntry - Get an entry in the trap buffer + * + * Description: + * The trap buffer stores various events. A user application somehow + * gets notified that an event occured and retrieves the trap buffer + * contens (or simply polls the buffer). The buffer is organized as + * a ring which stores the newest traps at the beginning. The oldest + * traps are overwritten by the newest ones. Each trap entry has a + * unique number, so that applications may detect new trap entries. + * + * Returns: + * A pointer to the trap entry + */ +PNMI_STATIC char* GetTrapEntry( +SK_AC *pAC, /* Pointer to adapter context */ +SK_U32 TrapId, /* SNMP ID of the trap */ +unsigned int Size) /* Space needed for trap entry */ +{ + unsigned int BufPad = pAC->Pnmi.TrapBufPad; + unsigned int BufFree = pAC->Pnmi.TrapBufFree; + unsigned int Beg = pAC->Pnmi.TrapQueueBeg; + unsigned int End = pAC->Pnmi.TrapQueueEnd; + char *pBuf = &pAC->Pnmi.TrapBuf[0]; + int Wrap; + unsigned int NeededSpace; + unsigned int EntrySize; + SK_U32 Val32; + SK_U64 Val64; + + + /* Last byte of entry will get a copy of the entry length */ + Size ++; + + /* + * Calculate needed buffer space */ + if (Beg >= Size) { + + NeededSpace = Size; + Wrap = SK_FALSE; + } + else { + NeededSpace = Beg + Size; + Wrap = SK_TRUE; + } + + /* + * Check if enough buffer space is provided. Otherwise + * free some entries. Leave one byte space between begin + * and end of buffer to make it possible to detect whether + * the buffer is full or empty + */ + while (BufFree < NeededSpace + 1) { + + if (End == 0) { + + End = SK_PNMI_TRAP_QUEUE_LEN; + } + + EntrySize = (unsigned int)*((unsigned char *)pBuf + End - 1); + BufFree += EntrySize; + End -= EntrySize; +#ifdef DEBUG + SK_MEMSET(pBuf + End, (char)(-1), EntrySize); +#endif /* DEBUG */ + if (End == BufPad) { +#ifdef DEBUG + SK_MEMSET(pBuf, (char)(-1), End); +#endif /* DEBUG */ + BufFree += End; + End = 0; + BufPad = 0; + } + } + + /* + * Insert new entry as first entry. Newest entries are + * stored at the beginning of the queue. + */ + if (Wrap) { + + BufPad = Beg; + Beg = SK_PNMI_TRAP_QUEUE_LEN - Size; + } + else { + Beg = Beg - Size; + } + BufFree -= NeededSpace; + + /* Save the current offsets */ + pAC->Pnmi.TrapQueueBeg = Beg; + pAC->Pnmi.TrapQueueEnd = End; + pAC->Pnmi.TrapBufPad = BufPad; + pAC->Pnmi.TrapBufFree = BufFree; + + /* Initialize the trap entry */ + *(pBuf + Beg + Size - 1) = (char)Size; + *(pBuf + Beg) = (char)Size; + Val32 = (pAC->Pnmi.TrapUnique) ++; + SK_PNMI_STORE_U32(pBuf + Beg + 1, Val32); + SK_PNMI_STORE_U32(pBuf + Beg + 1 + sizeof(SK_U32), TrapId); + Val64 = SK_PNMI_HUNDREDS_SEC(SkOsGetTime(pAC)); + SK_PNMI_STORE_U64(pBuf + Beg + 1 + 2 * sizeof(SK_U32), Val64); + + return (pBuf + Beg); +} + +/***************************************************************************** + * + * CopyTrapQueue - Copies the trap buffer for the TRAP OID + * + * Description: + * On a query of the TRAP OID the trap buffer contents will be + * copied continuously to the request buffer, which must be large + * enough. No length check is performed. + * + * Returns: + * Nothing + */ +PNMI_STATIC void CopyTrapQueue( +SK_AC *pAC, /* Pointer to adapter context */ +char *pDstBuf) /* Buffer to which the queued traps will be copied */ +{ + unsigned int BufPad = pAC->Pnmi.TrapBufPad; + unsigned int Trap = pAC->Pnmi.TrapQueueBeg; + unsigned int End = pAC->Pnmi.TrapQueueEnd; + char *pBuf = &pAC->Pnmi.TrapBuf[0]; + unsigned int Len; + unsigned int DstOff = 0; + + + while (Trap != End) { + + Len = (unsigned int)*(pBuf + Trap); + + /* + * Last byte containing a copy of the length will + * not be copied. + */ + *(pDstBuf + DstOff) = (char)(Len - 1); + SK_MEMCPY(pDstBuf + DstOff + 1, pBuf + Trap + 1, Len - 2); + DstOff += Len - 1; + + Trap += Len; + if (Trap == SK_PNMI_TRAP_QUEUE_LEN) { + + Trap = BufPad; + } + } +} + +/***************************************************************************** + * + * GetTrapQueueLen - Get the length of the trap buffer + * + * Description: + * Evaluates the number of currently stored traps and the needed + * buffer size to retrieve them. + * + * Returns: + * Nothing + */ +PNMI_STATIC void GetTrapQueueLen( +SK_AC *pAC, /* Pointer to adapter context */ +unsigned int *pLen, /* Length in Bytes of all queued traps */ +unsigned int *pEntries) /* Returns number of trapes stored in queue */ +{ + unsigned int BufPad = pAC->Pnmi.TrapBufPad; + unsigned int Trap = pAC->Pnmi.TrapQueueBeg; + unsigned int End = pAC->Pnmi.TrapQueueEnd; + char *pBuf = &pAC->Pnmi.TrapBuf[0]; + unsigned int Len; + unsigned int Entries = 0; + unsigned int TotalLen = 0; + + + while (Trap != End) { + + Len = (unsigned int)*(pBuf + Trap); + TotalLen += Len - 1; + Entries ++; + + Trap += Len; + if (Trap == SK_PNMI_TRAP_QUEUE_LEN) { + + Trap = BufPad; + } + } + + *pEntries = Entries; + *pLen = TotalLen; +} + +/***************************************************************************** + * + * QueueSimpleTrap - Store a simple trap to the trap buffer + * + * Description: + * A simple trap is a trap with now additional data. It consists + * simply of a trap code. + * + * Returns: + * Nothing + */ +PNMI_STATIC void QueueSimpleTrap( +SK_AC *pAC, /* Pointer to adapter context */ +SK_U32 TrapId) /* Type of sensor trap */ +{ + GetTrapEntry(pAC, TrapId, SK_PNMI_TRAP_SIMPLE_LEN); +} + +/***************************************************************************** + * + * QueueSensorTrap - Stores a sensor trap in the trap buffer + * + * Description: + * Gets an entry in the trap buffer and fills it with sensor related + * data. + * + * Returns: + * Nothing + */ +PNMI_STATIC void QueueSensorTrap( +SK_AC *pAC, /* Pointer to adapter context */ +SK_U32 TrapId, /* Type of sensor trap */ +unsigned int SensorIndex) /* Index of sensor which caused the trap */ +{ + char *pBuf; + unsigned int Offset; + unsigned int DescrLen; + SK_U32 Val32; + + + /* Get trap buffer entry */ + DescrLen = SK_STRLEN(pAC->I2c.SenTable[SensorIndex].SenDesc); + pBuf = GetTrapEntry(pAC, TrapId, + SK_PNMI_TRAP_SENSOR_LEN_BASE + DescrLen); + Offset = SK_PNMI_TRAP_SIMPLE_LEN; + + /* Store additionally sensor trap related data */ + Val32 = OID_SKGE_SENSOR_INDEX; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + *(pBuf + Offset + 4) = 4; + Val32 = (SK_U32)SensorIndex; + SK_PNMI_STORE_U32(pBuf + Offset + 5, Val32); + Offset += 9; + + Val32 = (SK_U32)OID_SKGE_SENSOR_DESCR; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + *(pBuf + Offset + 4) = (char)DescrLen; + SK_MEMCPY(pBuf + Offset + 5, pAC->I2c.SenTable[SensorIndex].SenDesc, + DescrLen); + Offset += DescrLen + 5; + + Val32 = OID_SKGE_SENSOR_TYPE; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + *(pBuf + Offset + 4) = 1; + *(pBuf + Offset + 5) = (char)pAC->I2c.SenTable[SensorIndex].SenType; + Offset += 6; + + Val32 = OID_SKGE_SENSOR_VALUE; + SK_PNMI_STORE_U32(pBuf + Offset, Val32); + *(pBuf + Offset + 4) = 4; + Val32 = (SK_U32)pAC->I2c.SenTable[SensorIndex].SenValue; + SK_PNMI_STORE_U32(pBuf + Offset + 5, Val32); +} + +/***************************************************************************** + * + * QueueRlmtNewMacTrap - Store a port switch trap in the trap buffer + * + * Description: + * Nothing further to explain. + * + * Returns: + * Nothing + */ +PNMI_STATIC void QueueRlmtNewMacTrap( +SK_AC *pAC, /* Pointer to adapter context */ +unsigned int ActiveMac) /* Index (0..n) of the currently active port */ +{ + char *pBuf; + SK_U32 Val32; + + + pBuf = GetTrapEntry(pAC, OID_SKGE_TRAP_RLMT_CHANGE_PORT, + SK_PNMI_TRAP_RLMT_CHANGE_LEN); + + Val32 = OID_SKGE_RLMT_PORT_ACTIVE; + SK_PNMI_STORE_U32(pBuf + SK_PNMI_TRAP_SIMPLE_LEN, Val32); + *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 4) = 1; + *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 5) = (char)ActiveMac; +} + +/***************************************************************************** + * + * QueueRlmtPortTrap - Store port related RLMT trap to trap buffer + * + * Description: + * Nothing further to explain. + * + * Returns: + * Nothing + */ +PNMI_STATIC void QueueRlmtPortTrap( +SK_AC *pAC, /* Pointer to adapter context */ +SK_U32 TrapId, /* Type of RLMT port trap */ +unsigned int PortIndex) /* Index of the port, which changed its state */ +{ + char *pBuf; + SK_U32 Val32; + + + pBuf = GetTrapEntry(pAC, TrapId, SK_PNMI_TRAP_RLMT_PORT_LEN); + + Val32 = OID_SKGE_RLMT_PORT_INDEX; + SK_PNMI_STORE_U32(pBuf + SK_PNMI_TRAP_SIMPLE_LEN, Val32); + *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 4) = 1; + *(pBuf + SK_PNMI_TRAP_SIMPLE_LEN + 5) = (char)PortIndex; +} + +/***************************************************************************** + * + * CopyMac - Copies a MAC address + * + * Description: + * Nothing further to explain. + * + * Returns: + * Nothing + */ +PNMI_STATIC void CopyMac( +char *pDst, /* Pointer to destination buffer */ +SK_MAC_ADDR *pMac) /* Pointer of Source */ +{ + int i; + + + for (i = 0; i < sizeof(SK_MAC_ADDR); i ++) { + + *(pDst + i) = pMac->a[i]; + } +} + +#ifdef SK_POWER_MGMT +/***************************************************************************** + * + * PowerManagement - OID handler function of PowerManagement OIDs + * + * Description: + * The code is simple. No description necessary. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ + +PNMI_STATIC int PowerManagement( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* Get/PreSet/Set action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer to which to mgmt data will be retrieved */ +unsigned int *pLen, /* On call: buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ +{ + + SK_U32 RetCode = SK_PNMI_ERR_GENERAL; + + /* + * Check instance. We only handle single instance variables + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + + /* Check length */ + switch (Id) { + + case OID_PNP_CAPABILITIES: + if (*pLen < sizeof(SK_PNP_CAPABILITIES)) { + + *pLen = sizeof(SK_PNP_CAPABILITIES); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_PNP_SET_POWER: + case OID_PNP_QUERY_POWER: + if (*pLen < sizeof(SK_DEVICE_POWER_STATE)) + { + *pLen = sizeof(SK_DEVICE_POWER_STATE); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_PNP_ADD_WAKE_UP_PATTERN: + case OID_PNP_REMOVE_WAKE_UP_PATTERN: + if (*pLen < sizeof(SK_PM_PACKET_PATTERN)) { + + *pLen = sizeof(SK_PM_PACKET_PATTERN); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_PNP_ENABLE_WAKE_UP: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + } + + /* + * Perform action + */ + if (Action == SK_PNMI_GET) { + + /* + * Get value + */ + switch (Id) { + + case OID_PNP_CAPABILITIES: + RetCode = SkPowerQueryPnPCapabilities(pAC, IoC, pBuf, pLen); + break; + + case OID_PNP_QUERY_POWER: + /* The Windows DDK describes: An OID_PNP_QUERY_POWER requests + the miniport to indicate whether it can transition its NIC + to the low-power state. + A miniport driver must always return NDIS_STATUS_SUCCESS + to a query of OID_PNP_QUERY_POWER. */ + *pLen = sizeof(SK_DEVICE_POWER_STATE); + RetCode = SK_PNMI_ERR_OK; + break; + + /* NDIS handles these OIDs as write-only. + * So in case of get action the buffer with written length = 0 + * is returned + */ + case OID_PNP_SET_POWER: + case OID_PNP_ADD_WAKE_UP_PATTERN: + case OID_PNP_REMOVE_WAKE_UP_PATTERN: + *pLen = 0; + RetCode = SK_PNMI_ERR_NOT_SUPPORTED; + break; + + case OID_PNP_ENABLE_WAKE_UP: + RetCode = SkPowerGetEnableWakeUp(pAC, IoC, pBuf, pLen); + break; + + default: + RetCode = SK_PNMI_ERR_GENERAL; + break; + } + + return (RetCode); + } + + + /* + * Perform preset or set + */ + + /* POWER module does not support PRESET action */ + if (Action == SK_PNMI_PRESET) { + return (SK_PNMI_ERR_OK); + } + + switch (Id) { + case OID_PNP_SET_POWER: + RetCode = SkPowerSetPower(pAC, IoC, pBuf, pLen); + break; + + case OID_PNP_ADD_WAKE_UP_PATTERN: + RetCode = SkPowerAddWakeUpPattern(pAC, IoC, pBuf, pLen); + break; + + case OID_PNP_REMOVE_WAKE_UP_PATTERN: + RetCode = SkPowerRemoveWakeUpPattern(pAC, IoC, pBuf, pLen); + break; + + case OID_PNP_ENABLE_WAKE_UP: + RetCode = SkPowerSetEnableWakeUp(pAC, IoC, pBuf, pLen); + break; + + default: + RetCode = SK_PNMI_ERR_READ_ONLY; + } + + return (RetCode); +} +#endif /* SK_POWER_MGMT */ + +#ifdef SK_DIAG_SUPPORT +/***************************************************************************** + * + * DiagActions - OID handler function of Diagnostic driver + * + * Description: + * The code is simple. No description necessary. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ + +PNMI_STATIC int DiagActions( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + + SK_U32 DiagStatus; + SK_U32 RetCode = SK_PNMI_ERR_GENERAL; + + /* + * Check instance. We only handle single instance variables. + */ + if (Instance != (SK_U32)(-1) && Instance != 1) { + + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + /* + * Check length. + */ + switch (Id) { + + case OID_SKGE_DIAG_MODE: + if (*pLen < sizeof(SK_U32)) { + + *pLen = sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR040, SK_PNMI_ERR040MSG); + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* Perform action. */ + + /* GET value. */ + if (Action == SK_PNMI_GET) { + + switch (Id) { + + case OID_SKGE_DIAG_MODE: + DiagStatus = pAC->Pnmi.DiagAttached; + SK_PNMI_STORE_U32(pBuf, DiagStatus); + *pLen = sizeof(SK_U32); + RetCode = SK_PNMI_ERR_OK; + break; + + default: + *pLen = 0; + RetCode = SK_PNMI_ERR_GENERAL; + break; + } + return (RetCode); + } + + /* From here SET or PRESET value. */ + + /* PRESET value is not supported. */ + if (Action == SK_PNMI_PRESET) { + return (SK_PNMI_ERR_OK); + } + + /* SET value. */ + switch (Id) { + case OID_SKGE_DIAG_MODE: + + /* Handle the SET. */ + switch (*pBuf) { + + /* Attach the DIAG to this adapter. */ + case SK_DIAG_ATTACHED: + /* Check if we come from running */ + if (pAC->Pnmi.DiagAttached == SK_DIAG_RUNNING) { + + RetCode = SkDrvLeaveDiagMode(pAC); + + } + else if (pAC->Pnmi.DiagAttached == SK_DIAG_IDLE) { + + RetCode = SK_PNMI_ERR_OK; + } + + else { + + RetCode = SK_PNMI_ERR_GENERAL; + + } + + if (RetCode == SK_PNMI_ERR_OK) { + + pAC->Pnmi.DiagAttached = SK_DIAG_ATTACHED; + } + break; + + /* Enter the DIAG mode in the driver. */ + case SK_DIAG_RUNNING: + RetCode = SK_PNMI_ERR_OK; + + /* + * If DiagAttached is set, we can tell the driver + * to enter the DIAG mode. + */ + if (pAC->Pnmi.DiagAttached == SK_DIAG_ATTACHED) { + /* If DiagMode is not active, we can enter it. */ + if (!pAC->DiagModeActive) { + + RetCode = SkDrvEnterDiagMode(pAC); + } + else { + + RetCode = SK_PNMI_ERR_GENERAL; + } + } + else { + + RetCode = SK_PNMI_ERR_GENERAL; + } + + if (RetCode == SK_PNMI_ERR_OK) { + + pAC->Pnmi.DiagAttached = SK_DIAG_RUNNING; + } + break; + + case SK_DIAG_IDLE: + /* Check if we come from running */ + if (pAC->Pnmi.DiagAttached == SK_DIAG_RUNNING) { + + RetCode = SkDrvLeaveDiagMode(pAC); + + } + else if (pAC->Pnmi.DiagAttached == SK_DIAG_ATTACHED) { + + RetCode = SK_PNMI_ERR_OK; + } + + else { + + RetCode = SK_PNMI_ERR_GENERAL; + + } + + if (RetCode == SK_PNMI_ERR_OK) { + + pAC->Pnmi.DiagAttached = SK_DIAG_IDLE; + } + break; + + default: + RetCode = SK_PNMI_ERR_BAD_VALUE; + break; + } + break; + + default: + RetCode = SK_PNMI_ERR_GENERAL; + } + + if (RetCode == SK_PNMI_ERR_OK) { + *pLen = sizeof(SK_U32); + } + else { + + *pLen = 0; + } + return (RetCode); +} +#endif /* SK_DIAG_SUPPORT */ + +/***************************************************************************** + * + * Vct - OID handler function of OIDs + * + * Description: + * The code is simple. No description necessary. + * + * Returns: + * SK_PNMI_ERR_OK The request was performed successfully. + * SK_PNMI_ERR_GENERAL A general severe internal error occured. + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to contain + * the correct data (e.g. a 32bit value is + * needed, but a 16 bit value was passed). + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter). + * SK_PNMI_ERR_READ_ONLY Only the Get action is allowed. + * + */ + +PNMI_STATIC int Vct( +SK_AC *pAC, /* Pointer to adapter context */ +SK_IOC IoC, /* IO context handle */ +int Action, /* GET/PRESET/SET action */ +SK_U32 Id, /* Object ID that is to be processed */ +char *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* On call: pBuf buffer length. On return: used buffer */ +SK_U32 Instance, /* Instance (-1,2..n) that is to be queried */ +unsigned int TableIndex, /* Index to the Id table */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ + SK_GEPORT *pPrt; + SK_PNMI_VCT *pVctBackupData; + SK_U32 LogPortMax; + SK_U32 PhysPortMax; + SK_U32 PhysPortIndex; + SK_U32 Limit; + SK_U32 Offset; + SK_BOOL Link; + SK_U32 RetCode = SK_PNMI_ERR_GENERAL; + int i; + SK_EVPARA Para; + SK_U32 CableLength; + + /* + * Calculate the port indexes from the instance. + */ + PhysPortMax = pAC->GIni.GIMacsFound; + LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); + + /* Dual net mode? */ + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + LogPortMax--; + } + + if ((Instance != (SK_U32) (-1))) { + /* Check instance range. */ + if ((Instance < 2) || (Instance > LogPortMax)) { + *pLen = 0; + return (SK_PNMI_ERR_UNKNOWN_INST); + } + + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { + PhysPortIndex = NetIndex; + } + else { + PhysPortIndex = Instance - 2; + } + Limit = PhysPortIndex + 1; + } + else { + /* + * Instance == (SK_U32) (-1), get all Instances of that OID. + * + * Not implemented yet. May be used in future releases. + */ + PhysPortIndex = 0; + Limit = PhysPortMax; + } + + pPrt = &pAC->GIni.GP[PhysPortIndex]; + if (pPrt->PHWLinkUp) { + Link = SK_TRUE; + } + else { + Link = SK_FALSE; + } + + /* Check MAC type */ + if (pPrt->PhyType != SK_PHY_MARV_COPPER) { + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* Initialize backup data pointer. */ + pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex]; + + /* Check action type */ + if (Action == SK_PNMI_GET) { + /* Check length */ + switch (Id) { + + case OID_SKGE_VCT_GET: + if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT)) { + *pLen = (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + case OID_SKGE_VCT_STATUS: + if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U8)) { + *pLen = (Limit - PhysPortIndex) * sizeof(SK_U8); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* Get value */ + Offset = 0; + for (; PhysPortIndex < Limit; PhysPortIndex++) { + switch (Id) { + + case OID_SKGE_VCT_GET: + if ((Link == SK_FALSE) && + (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING)) { + RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE); + if (RetCode == 0) { + pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING; + pAC->Pnmi.VctStatus[PhysPortIndex] |= + (SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE); + + /* Copy results for later use to PNMI struct. */ + for (i = 0; i < 4; i++) { + if (pPrt->PMdiPairSts[i] == SK_PNMI_VCT_NORMAL_CABLE) { + if ((pPrt->PMdiPairLen[i] > 35) && (pPrt->PMdiPairLen[i] < 0xff)) { + pPrt->PMdiPairSts[i] = SK_PNMI_VCT_IMPEDANCE_MISMATCH; + } + } + if ((pPrt->PMdiPairLen[i] > 35) && (pPrt->PMdiPairLen[i] != 0xff)) { + CableLength = 1000 * (((175 * pPrt->PMdiPairLen[i]) / 210) - 28); + } + else { + CableLength = 0; + } + pVctBackupData->PMdiPairLen[i] = CableLength; + pVctBackupData->PMdiPairSts[i] = pPrt->PMdiPairSts[i]; + } + + Para.Para32[0] = PhysPortIndex; + Para.Para32[1] = -1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para); + SkEventDispatcher(pAC, IoC); + } + else { + ; /* VCT test is running. */ + } + } + + /* Get all results. */ + CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex); + Offset += sizeof(SK_U8); + *(pBuf + Offset) = pPrt->PCableLen; + Offset += sizeof(SK_U8); + for (i = 0; i < 4; i++) { + SK_PNMI_STORE_U32((pBuf + Offset), pVctBackupData->PMdiPairLen[i]); + Offset += sizeof(SK_U32); + } + for (i = 0; i < 4; i++) { + *(pBuf + Offset) = pVctBackupData->PMdiPairSts[i]; + Offset += sizeof(SK_U8); + } + + RetCode = SK_PNMI_ERR_OK; + break; + + case OID_SKGE_VCT_STATUS: + CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex); + Offset += sizeof(SK_U8); + RetCode = SK_PNMI_ERR_OK; + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } /* for */ + *pLen = Offset; + return (RetCode); + + } /* if SK_PNMI_GET */ + + /* + * From here SET or PRESET action. Check if the passed + * buffer length is plausible. + */ + + /* Check length */ + switch (Id) { + case OID_SKGE_VCT_SET: + if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U32)) { + *pLen = (Limit - PhysPortIndex) * sizeof(SK_U32); + return (SK_PNMI_ERR_TOO_SHORT); + } + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + + /* + * Perform preset or set. + */ + + /* VCT does not support PRESET action. */ + if (Action == SK_PNMI_PRESET) { + return (SK_PNMI_ERR_OK); + } + + Offset = 0; + for (; PhysPortIndex < Limit; PhysPortIndex++) { + switch (Id) { + case OID_SKGE_VCT_SET: /* Start VCT test. */ + if (Link == SK_FALSE) { + SkGeStopPort(pAC, IoC, PhysPortIndex, SK_STOP_ALL, SK_SOFT_RST); + + RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_TRUE); + if (RetCode == 0) { /* RetCode: 0 => Start! */ + pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_PENDING; + pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_NEW_VCT_DATA; + pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_LINK; + + /* + * Start VCT timer counter. + */ + SK_MEMSET((char *) &Para, 0, sizeof(Para)); + Para.Para32[0] = PhysPortIndex; + Para.Para32[1] = -1; + SkTimerStart(pAC, IoC, &pAC->Pnmi.VctTimeout[PhysPortIndex].VctTimer, + 4000000, SKGE_PNMI, SK_PNMI_EVT_VCT_RESET, Para); + SK_PNMI_STORE_U32((pBuf + Offset), RetCode); + RetCode = SK_PNMI_ERR_OK; + } + else { /* RetCode: 2 => Running! */ + SK_PNMI_STORE_U32((pBuf + Offset), RetCode); + RetCode = SK_PNMI_ERR_OK; + } + } + else { /* RetCode: 4 => Link! */ + RetCode = 4; + SK_PNMI_STORE_U32((pBuf + Offset), RetCode); + RetCode = SK_PNMI_ERR_OK; + } + Offset += sizeof(SK_U32); + break; + + default: + *pLen = 0; + return (SK_PNMI_ERR_GENERAL); + } + } /* for */ + *pLen = Offset; + return (RetCode); + +} /* Vct */ + + +PNMI_STATIC void CheckVctStatus( +SK_AC *pAC, +SK_IOC IoC, +char *pBuf, +SK_U32 Offset, +SK_U32 PhysPortIndex) +{ + SK_GEPORT *pPrt; + SK_PNMI_VCT *pVctData; + SK_U32 RetCode; + + pPrt = &pAC->GIni.GP[PhysPortIndex]; + + pVctData = (SK_PNMI_VCT *) (pBuf + Offset); + pVctData->VctStatus = SK_PNMI_VCT_NONE; + + if (!pPrt->PHWLinkUp) { + + /* Was a VCT test ever made before? */ + if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) { + if ((pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_LINK)) { + pVctData->VctStatus |= SK_PNMI_VCT_OLD_VCT_DATA; + } + else { + pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA; + } + } + + /* Check VCT test status. */ + RetCode = SkGmCableDiagStatus(pAC,IoC, PhysPortIndex, SK_FALSE); + if (RetCode == 2) { /* VCT test is running. */ + pVctData->VctStatus |= SK_PNMI_VCT_RUNNING; + } + else { /* VCT data was copied to pAC here. Check PENDING state. */ + if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING) { + pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA; + } + } + + if (pPrt->PCableLen != 0xff) { /* Old DSP value. */ + pVctData->VctStatus |= SK_PNMI_VCT_OLD_DSP_DATA; + } + } + else { + + /* Was a VCT test ever made before? */ + if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) { + pVctData->VctStatus &= ~SK_PNMI_VCT_NEW_VCT_DATA; + pVctData->VctStatus |= SK_PNMI_VCT_OLD_VCT_DATA; + } + + /* DSP only valid in 100/1000 modes. */ + if (pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed != + SK_LSPEED_STAT_10MBPS) { + pVctData->VctStatus |= SK_PNMI_VCT_NEW_DSP_DATA; + } + } +} /* CheckVctStatus */ + + +/***************************************************************************** + * + * SkPnmiGenIoctl - Handles new generic PNMI IOCTL, calls the needed + * PNMI function depending on the subcommand and + * returns all data belonging to the complete database + * or OID request. + * + * Description: + * Looks up the requested subcommand, calls the corresponding handler + * function and passes all required parameters to it. + * The function is called by the driver. It is needed to handle the new + * generic PNMI IOCTL. This IOCTL is given to the driver and contains both + * the OID and a subcommand to decide what kind of request has to be done. + * + * Returns: + * SK_PNMI_ERR_OK The request was successfully performed + * SK_PNMI_ERR_GENERAL A general severe internal error occured + * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take + * the data. + * SK_PNMI_ERR_UNKNOWN_OID The requested OID is unknown + * SK_PNMI_ERR_UNKNOWN_INST The requested instance of the OID doesn't + * exist (e.g. port instance 3 on a two port + * adapter. + */ +int SkPnmiGenIoctl( +SK_AC *pAC, /* Pointer to adapter context struct */ +SK_IOC IoC, /* I/O context */ +void *pBuf, /* Buffer used for the management data transfer */ +unsigned int *pLen, /* Length of buffer */ +SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ +{ +SK_I32 Mode; /* Store value of subcommand. */ +SK_U32 Oid; /* Store value of OID. */ +int ReturnCode; /* Store return value to show status of PNMI action. */ +int HeaderLength; /* Length of desired action plus OID. */ + + ReturnCode = SK_PNMI_ERR_GENERAL; + + SK_MEMCPY(&Mode, pBuf, sizeof(SK_I32)); + SK_MEMCPY(&Oid, (char *) pBuf + sizeof(SK_I32), sizeof(SK_U32)); + HeaderLength = sizeof(SK_I32) + sizeof(SK_U32); + *pLen = *pLen - HeaderLength; + SK_MEMCPY((char *) pBuf + sizeof(SK_I32), (char *) pBuf + HeaderLength, *pLen); + + switch(Mode) { + case SK_GET_SINGLE_VAR: + ReturnCode = SkPnmiGetVar(pAC, IoC, Oid, + (char *) pBuf + sizeof(SK_I32), pLen, + ((SK_U32) (-1)), NetIndex); + SK_PNMI_STORE_U32(pBuf, ReturnCode); + *pLen = *pLen + sizeof(SK_I32); + break; + case SK_PRESET_SINGLE_VAR: + ReturnCode = SkPnmiPreSetVar(pAC, IoC, Oid, + (char *) pBuf + sizeof(SK_I32), pLen, + ((SK_U32) (-1)), NetIndex); + SK_PNMI_STORE_U32(pBuf, ReturnCode); + *pLen = *pLen + sizeof(SK_I32); + break; + case SK_SET_SINGLE_VAR: + ReturnCode = SkPnmiSetVar(pAC, IoC, Oid, + (char *) pBuf + sizeof(SK_I32), pLen, + ((SK_U32) (-1)), NetIndex); + SK_PNMI_STORE_U32(pBuf, ReturnCode); + *pLen = *pLen + sizeof(SK_I32); + break; + case SK_GET_FULL_MIB: + ReturnCode = SkPnmiGetStruct(pAC, IoC, pBuf, pLen, NetIndex); + break; + case SK_PRESET_FULL_MIB: + ReturnCode = SkPnmiPreSetStruct(pAC, IoC, pBuf, pLen, NetIndex); + break; + case SK_SET_FULL_MIB: + ReturnCode = SkPnmiSetStruct(pAC, IoC, pBuf, pLen, NetIndex); + break; + default: + break; + } + + return (ReturnCode); + +} /* SkGeIocGen */ diff --git a/drivers/net/sk98lin/skgesirq.c b/drivers/net/sk98lin/skgesirq.c new file mode 100644 index 00000000000..3e7aa49afd0 --- /dev/null +++ b/drivers/net/sk98lin/skgesirq.c @@ -0,0 +1,2229 @@ +/****************************************************************************** + * + * Name: skgesirq.c + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.92 $ + * Date: $Date: 2003/09/16 14:37:07 $ + * Purpose: Special IRQ module + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * Special Interrupt handler + * + * The following abstract should show how this module is included + * in the driver path: + * + * In the ISR of the driver the bits for frame transmission complete and + * for receive complete are checked and handled by the driver itself. + * The bits of the slow path mask are checked after that and then the + * entry into the so-called "slow path" is prepared. It is an implementors + * decision whether this is executed directly or just scheduled by + * disabling the mask. In the interrupt service routine some events may be + * generated, so it would be a good idea to call the EventDispatcher + * right after this ISR. + * + * The Interrupt source register of the adapter is NOT read by this module. + * SO if the drivers implementor needs a while loop around the + * slow data paths interrupt bits, he needs to call the SkGeSirqIsr() for + * each loop entered. + * + * However, the MAC Interrupt status registers are read in a while loop. + * + */ + +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: skgesirq.c,v 1.92 2003/09/16 14:37:07 rschmidt Exp $ (C) Marvell."; +#endif + +#include "h/skdrv1st.h" /* Driver Specific Definitions */ +#ifndef SK_SLIM +#include "h/skgepnmi.h" /* PNMI Definitions */ +#include "h/skrlmt.h" /* RLMT Definitions */ +#endif +#include "h/skdrv2nd.h" /* Adapter Control and Driver specific Def. */ + +/* local function prototypes */ +#ifdef GENESIS +static int SkGePortCheckUpXmac(SK_AC*, SK_IOC, int, SK_BOOL); +static int SkGePortCheckUpBcom(SK_AC*, SK_IOC, int, SK_BOOL); +static void SkPhyIsrBcom(SK_AC*, SK_IOC, int, SK_U16); +#endif /* GENESIS */ +#ifdef YUKON +static int SkGePortCheckUpGmac(SK_AC*, SK_IOC, int, SK_BOOL); +static void SkPhyIsrGmac(SK_AC*, SK_IOC, int, SK_U16); +#endif /* YUKON */ +#ifdef OTHER_PHY +static int SkGePortCheckUpLone(SK_AC*, SK_IOC, int, SK_BOOL); +static int SkGePortCheckUpNat(SK_AC*, SK_IOC, int, SK_BOOL); +static void SkPhyIsrLone(SK_AC*, SK_IOC, int, SK_U16); +#endif /* OTHER_PHY */ + +#ifdef GENESIS +/* + * array of Rx counter from XMAC which are checked + * in AutoSense mode to check whether a link is not able to auto-negotiate. + */ +static const SK_U16 SkGeRxRegs[]= { + XM_RXF_64B, + XM_RXF_127B, + XM_RXF_255B, + XM_RXF_511B, + XM_RXF_1023B, + XM_RXF_MAX_SZ +} ; +#endif /* GENESIS */ + +#ifdef __C2MAN__ +/* + * Special IRQ function + * + * General Description: + * + */ +intro() +{} +#endif + +/****************************************************************************** + * + * SkHWInitDefSense() - Default Autosensing mode initialization + * + * Description: sets the PLinkMode for HWInit + * + * Returns: N/A + */ +static void SkHWInitDefSense( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + pPrt = &pAC->GIni.GP[Port]; + + pPrt->PAutoNegTimeOut = 0; + + if (pPrt->PLinkModeConf != SK_LMODE_AUTOSENSE) { + pPrt->PLinkMode = pPrt->PLinkModeConf; + return; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("AutoSensing: First mode %d on Port %d\n", + (int)SK_LMODE_AUTOFULL, Port)); + + pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL; + + return; +} /* SkHWInitDefSense */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkHWSenseGetNext() - Get Next Autosensing Mode + * + * Description: gets the appropriate next mode + * + * Note: + * + */ +static SK_U8 SkHWSenseGetNext( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + pPrt = &pAC->GIni.GP[Port]; + + pPrt->PAutoNegTimeOut = 0; + + if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) { + /* Leave all as configured */ + return(pPrt->PLinkModeConf); + } + + if (pPrt->PLinkMode == (SK_U8)SK_LMODE_AUTOFULL) { + /* Return next mode AUTOBOTH */ + return ((SK_U8)SK_LMODE_AUTOBOTH); + } + + /* Return default autofull */ + return ((SK_U8)SK_LMODE_AUTOFULL); +} /* SkHWSenseGetNext */ + + +/****************************************************************************** + * + * SkHWSenseSetNext() - Autosensing Set next mode + * + * Description: sets the appropriate next mode + * + * Returns: N/A + */ +static void SkHWSenseSetNext( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_U8 NewMode) /* New Mode to be written in sense mode */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + pPrt = &pAC->GIni.GP[Port]; + + pPrt->PAutoNegTimeOut = 0; + + if (pPrt->PLinkModeConf != (SK_U8)SK_LMODE_AUTOSENSE) { + return; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("AutoSensing: next mode %d on Port %d\n", + (int)NewMode, Port)); + + pPrt->PLinkMode = NewMode; + + return; +} /* SkHWSenseSetNext */ +#endif /* GENESIS */ + + +/****************************************************************************** + * + * SkHWLinkDown() - Link Down handling + * + * Description: handles the hardware link down signal + * + * Returns: N/A + */ +void SkHWLinkDown( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + pPrt = &pAC->GIni.GP[Port]; + + /* Disable all MAC interrupts */ + SkMacIrqDisable(pAC, IoC, Port); + + /* Disable Receiver and Transmitter */ + SkMacRxTxDisable(pAC, IoC, Port); + + /* Init default sense mode */ + SkHWInitDefSense(pAC, IoC, Port); + + if (pPrt->PHWLinkUp == SK_FALSE) { + return; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link down Port %d\n", Port)); + + /* Set Link to DOWN */ + pPrt->PHWLinkUp = SK_FALSE; + + /* Reset Port stati */ + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; + pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE; + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_INDETERMINATED; + + /* Re-init Phy especially when the AutoSense default is set now */ + SkMacInitPhy(pAC, IoC, Port, SK_FALSE); + + /* GP0: used for workaround of Rev. C Errata 2 */ + + /* Do NOT signal to RLMT */ + + /* Do NOT start the timer here */ +} /* SkHWLinkDown */ + + +/****************************************************************************** + * + * SkHWLinkUp() - Link Up handling + * + * Description: handles the hardware link up signal + * + * Returns: N/A + */ +static void SkHWLinkUp( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PHWLinkUp) { + /* We do NOT need to proceed on active link */ + return; + } + + pPrt->PHWLinkUp = SK_TRUE; + pPrt->PAutoNegFail = SK_FALSE; + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; + + if (pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOHALF && + pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOFULL && + pPrt->PLinkMode != (SK_U8)SK_LMODE_AUTOBOTH) { + /* Link is up and no Auto-negotiation should be done */ + + /* Link speed should be the configured one */ + switch (pPrt->PLinkSpeed) { + case SK_LSPEED_AUTO: + /* default is 1000 Mbps */ + case SK_LSPEED_1000MBPS: + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS; + break; + case SK_LSPEED_100MBPS: + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS; + break; + case SK_LSPEED_10MBPS: + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS; + break; + } + + /* Set Link Mode Status */ + if (pPrt->PLinkMode == SK_LMODE_FULL) { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_FULL; + } + else { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_HALF; + } + + /* No flow control without auto-negotiation */ + pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE; + + /* enable Rx/Tx */ + (void)SkMacRxTxEnable(pAC, IoC, Port); + } +} /* SkHWLinkUp */ + + +/****************************************************************************** + * + * SkMacParity() - MAC parity workaround + * + * Description: handles MAC parity errors correctly + * + * Returns: N/A + */ +static void SkMacParity( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index of the port failed */ +{ + SK_EVPARA Para; + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_U32 TxMax; /* Tx Max Size Counter */ + + pPrt = &pAC->GIni.GP[Port]; + + /* Clear IRQ Tx Parity Error */ +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_PERR); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */ + SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), + (SK_U8)((pAC->GIni.GIChipId == CHIP_ID_YUKON && + pAC->GIni.GIChipRev == 0) ? GMF_CLI_TX_FC : GMF_CLI_TX_PE)); + } +#endif /* YUKON */ + + if (pPrt->PCheckPar) { + + if (Port == MAC_1) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E016, SKERR_SIRQ_E016MSG); + } + else { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E017, SKERR_SIRQ_E017MSG); + } + Para.Para64 = Port; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + + Para.Para32[0] = Port; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + + return; + } + + /* Check whether frames with a size of 1k were sent */ +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* Snap statistic counters */ + (void)SkXmUpdateStats(pAC, IoC, Port); + + (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXF_MAX_SZ, &TxMax); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + (void)SkGmMacStatistic(pAC, IoC, Port, GM_TXF_1518B, &TxMax); + } +#endif /* YUKON */ + + if (TxMax > 0) { + /* From now on check the parity */ + pPrt->PCheckPar = SK_TRUE; + } +} /* SkMacParity */ + + +/****************************************************************************** + * + * SkGeHwErr() - Hardware Error service routine + * + * Description: handles all HW Error interrupts + * + * Returns: N/A + */ +static void SkGeHwErr( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +SK_U32 HwStatus) /* Interrupt status word */ +{ + SK_EVPARA Para; + SK_U16 Word; + + if ((HwStatus & (IS_IRQ_MST_ERR | IS_IRQ_STAT)) != 0) { + /* PCI Errors occured */ + if ((HwStatus & IS_IRQ_STAT) != 0) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E013, SKERR_SIRQ_E013MSG); + } + else { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E012, SKERR_SIRQ_E012MSG); + } + + /* Reset all bits in the PCI STATUS register */ + SK_IN16(IoC, PCI_C(PCI_STATUS), &Word); + + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON); + SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS)); + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF); + + Para.Para64 = 0; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para); + } + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + if ((HwStatus & IS_NO_STAT_M1) != 0) { + /* Ignore it */ + /* This situation is also indicated in the descriptor */ + SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INSTAT); + } + + if ((HwStatus & IS_NO_STAT_M2) != 0) { + /* Ignore it */ + /* This situation is also indicated in the descriptor */ + SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INSTAT); + } + + if ((HwStatus & IS_NO_TIST_M1) != 0) { + /* Ignore it */ + /* This situation is also indicated in the descriptor */ + SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INTIST); + } + + if ((HwStatus & IS_NO_TIST_M2) != 0) { + /* Ignore it */ + /* This situation is also indicated in the descriptor */ + SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INTIST); + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* This is necessary only for Rx timing measurements */ + if ((HwStatus & IS_IRQ_TIST_OV) != 0) { + /* increment Time Stamp Timer counter (high) */ + pAC->GIni.GITimeStampCnt++; + + /* Clear Time Stamp Timer IRQ */ + SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_CLR_IRQ); + } + + if ((HwStatus & IS_IRQ_SENSOR) != 0) { + /* no sensors on 32-bit Yukon */ + if (pAC->GIni.GIYukon32Bit) { + /* disable HW Error IRQ */ + pAC->GIni.GIValIrqMask &= ~IS_HW_ERR; + } + } + } +#endif /* YUKON */ + + if ((HwStatus & IS_RAM_RD_PAR) != 0) { + SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_RD_PERR); + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E014, SKERR_SIRQ_E014MSG); + Para.Para64 = 0; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para); + } + + if ((HwStatus & IS_RAM_WR_PAR) != 0) { + SK_OUT16(IoC, B3_RI_CTRL, RI_CLR_WR_PERR); + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E015, SKERR_SIRQ_E015MSG); + Para.Para64 = 0; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_ADAP_FAIL, Para); + } + + if ((HwStatus & IS_M1_PAR_ERR) != 0) { + SkMacParity(pAC, IoC, MAC_1); + } + + if ((HwStatus & IS_M2_PAR_ERR) != 0) { + SkMacParity(pAC, IoC, MAC_2); + } + + if ((HwStatus & IS_R1_PAR_ERR) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_P); + + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E018, SKERR_SIRQ_E018MSG); + Para.Para64 = MAC_1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + + Para.Para32[0] = MAC_1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((HwStatus & IS_R2_PAR_ERR) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_P); + + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E019, SKERR_SIRQ_E019MSG); + Para.Para64 = MAC_2; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + + Para.Para32[0] = MAC_2; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } +} /* SkGeHwErr */ + + +/****************************************************************************** + * + * SkGeSirqIsr() - Special Interrupt Service Routine + * + * Description: handles all non data transfer specific interrupts (slow path) + * + * Returns: N/A + */ +void SkGeSirqIsr( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +SK_U32 Istatus) /* Interrupt status word */ +{ + SK_EVPARA Para; + SK_U32 RegVal32; /* Read register value */ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_U16 PhyInt; + int i; + + if (((Istatus & IS_HW_ERR) & pAC->GIni.GIValIrqMask) != 0) { + /* read the HW Error Interrupt source */ + SK_IN32(IoC, B0_HWE_ISRC, &RegVal32); + + SkGeHwErr(pAC, IoC, RegVal32); + } + + /* + * Packet Timeout interrupts + */ + /* Check whether MACs are correctly initialized */ + if (((Istatus & (IS_PA_TO_RX1 | IS_PA_TO_TX1)) != 0) && + pAC->GIni.GP[MAC_1].PState == SK_PRT_RESET) { + /* MAC 1 was not initialized but Packet timeout occured */ + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E004, + SKERR_SIRQ_E004MSG); + } + + if (((Istatus & (IS_PA_TO_RX2 | IS_PA_TO_TX2)) != 0) && + pAC->GIni.GP[MAC_2].PState == SK_PRT_RESET) { + /* MAC 2 was not initialized but Packet timeout occured */ + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E005, + SKERR_SIRQ_E005MSG); + } + + if ((Istatus & IS_PA_TO_RX1) != 0) { + /* Means network is filling us up */ + SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E002, + SKERR_SIRQ_E002MSG); + SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX1); + } + + if ((Istatus & IS_PA_TO_RX2) != 0) { + /* Means network is filling us up */ + SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E003, + SKERR_SIRQ_E003MSG); + SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_RX2); + } + + if ((Istatus & IS_PA_TO_TX1) != 0) { + + pPrt = &pAC->GIni.GP[0]; + + /* May be a normal situation in a server with a slow network */ + SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX1); + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* + * workaround: if in half duplex mode, check for Tx hangup. + * Read number of TX'ed bytes, wait for 10 ms, then compare + * the number with current value. If nothing changed, we assume + * that Tx is hanging and do a FIFO flush (see event routine). + */ + if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || + pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) && + !pPrt->HalfDupTimerActive) { + /* + * many more pack. arb. timeouts may come in between, + * we ignore those + */ + pPrt->HalfDupTimerActive = SK_TRUE; + /* Snap statistic counters */ + (void)SkXmUpdateStats(pAC, IoC, 0); + + (void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_HI, &RegVal32); + + pPrt->LastOctets = (SK_U64)RegVal32 << 32; + + (void)SkXmMacStatistic(pAC, IoC, 0, XM_TXO_OK_LO, &RegVal32); + + pPrt->LastOctets += RegVal32; + + Para.Para32[0] = 0; + SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME, + SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para); + } + } +#endif /* GENESIS */ + } + + if ((Istatus & IS_PA_TO_TX2) != 0) { + + pPrt = &pAC->GIni.GP[1]; + + /* May be a normal situation in a server with a slow network */ + SK_OUT16(IoC, B3_PA_CTRL, PA_CLR_TO_TX2); + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* workaround: see above */ + if ((pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || + pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) && + !pPrt->HalfDupTimerActive) { + pPrt->HalfDupTimerActive = SK_TRUE; + /* Snap statistic counters */ + (void)SkXmUpdateStats(pAC, IoC, 1); + + (void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_HI, &RegVal32); + + pPrt->LastOctets = (SK_U64)RegVal32 << 32; + + (void)SkXmMacStatistic(pAC, IoC, 1, XM_TXO_OK_LO, &RegVal32); + + pPrt->LastOctets += RegVal32; + + Para.Para32[0] = 1; + SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME, + SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para); + } + } +#endif /* GENESIS */ + } + + /* Check interrupts of the particular queues */ + if ((Istatus & IS_R1_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_R1_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E006, + SKERR_SIRQ_E006MSG); + Para.Para64 = MAC_1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((Istatus & IS_R2_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_R2_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E007, + SKERR_SIRQ_E007MSG); + Para.Para64 = MAC_2; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_2; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((Istatus & IS_XS1_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_XS1_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E008, + SKERR_SIRQ_E008MSG); + Para.Para64 = MAC_1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((Istatus & IS_XA1_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_XA1_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E009, + SKERR_SIRQ_E009MSG); + Para.Para64 = MAC_1; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_1; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((Istatus & IS_XS2_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_XS2_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E010, + SKERR_SIRQ_E010MSG); + Para.Para64 = MAC_2; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_2; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((Istatus & IS_XA2_C) != 0) { + /* Clear IRQ */ + SK_OUT32(IoC, B0_XA2_CSR, CSR_IRQ_CL_C); + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E011, + SKERR_SIRQ_E011MSG); + Para.Para64 = MAC_2; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para); + Para.Para32[0] = MAC_2; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + /* External reg interrupt */ + if ((Istatus & IS_EXT_REG) != 0) { + /* Test IRQs from PHY */ + for (i = 0; i < pAC->GIni.GIMacsFound; i++) { + + pPrt = &pAC->GIni.GP[i]; + + if (pPrt->PState == SK_PRT_RESET) { + continue; + } + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + switch (pPrt->PhyType) { + + case SK_PHY_XMAC: + break; + + case SK_PHY_BCOM: + SkXmPhyRead(pAC, IoC, i, PHY_BCOM_INT_STAT, &PhyInt); + + if ((PhyInt & ~PHY_B_DEF_MSK) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Port %d Bcom Int: 0x%04X\n", + i, PhyInt)); + SkPhyIsrBcom(pAC, IoC, i, PhyInt); + } + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + SkXmPhyRead(pAC, IoC, i, PHY_LONE_INT_STAT, &PhyInt); + + if ((PhyInt & PHY_L_DEF_MSK) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Port %d Lone Int: %x\n", + i, PhyInt)); + SkPhyIsrLone(pAC, IoC, i, PhyInt); + } + break; +#endif /* OTHER_PHY */ + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* Read PHY Interrupt Status */ + SkGmPhyRead(pAC, IoC, i, PHY_MARV_INT_STAT, &PhyInt); + + if ((PhyInt & PHY_M_DEF_MSK) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Port %d Marv Int: 0x%04X\n", + i, PhyInt)); + SkPhyIsrGmac(pAC, IoC, i, PhyInt); + } + } +#endif /* YUKON */ + } + } + + /* I2C Ready interrupt */ + if ((Istatus & IS_I2C_READY) != 0) { +#ifdef SK_SLIM + SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ); +#else + SkI2cIsr(pAC, IoC); +#endif + } + + /* SW forced interrupt */ + if ((Istatus & IS_IRQ_SW) != 0) { + /* clear the software IRQ */ + SK_OUT8(IoC, B0_CTST, CS_CL_SW_IRQ); + } + + if ((Istatus & IS_LNK_SYNC_M1) != 0) { + /* + * We do NOT need the Link Sync interrupt, because it shows + * us only a link going down. + */ + /* clear interrupt */ + SK_OUT8(IoC, MR_ADDR(MAC_1, LNK_SYNC_CTRL), LED_CLR_IRQ); + } + + /* Check MAC after link sync counter */ + if ((Istatus & IS_MAC1) != 0) { + /* IRQ from MAC 1 */ + SkMacIrq(pAC, IoC, MAC_1); + } + + if ((Istatus & IS_LNK_SYNC_M2) != 0) { + /* + * We do NOT need the Link Sync interrupt, because it shows + * us only a link going down. + */ + /* clear interrupt */ + SK_OUT8(IoC, MR_ADDR(MAC_2, LNK_SYNC_CTRL), LED_CLR_IRQ); + } + + /* Check MAC after link sync counter */ + if ((Istatus & IS_MAC2) != 0) { + /* IRQ from MAC 2 */ + SkMacIrq(pAC, IoC, MAC_2); + } + + /* Timer interrupt (served last) */ + if ((Istatus & IS_TIMINT) != 0) { + /* check for HW Errors */ + if (((Istatus & IS_HW_ERR) & ~pAC->GIni.GIValIrqMask) != 0) { + /* read the HW Error Interrupt source */ + SK_IN32(IoC, B0_HWE_ISRC, &RegVal32); + + SkGeHwErr(pAC, IoC, RegVal32); + } + + SkHwtIsr(pAC, IoC); + } + +} /* SkGeSirqIsr */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkGePortCheckShorts() - Implementing XMAC Workaround Errata # 2 + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + */ +static int SkGePortCheckShorts( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port) /* Which port should be checked */ +{ + SK_U32 Shorts; /* Short Event Counter */ + SK_U32 CheckShorts; /* Check value for Short Event Counter */ + SK_U64 RxCts; /* Rx Counter (packets on network) */ + SK_U32 RxTmp; /* Rx temp. Counter */ + SK_U32 FcsErrCts; /* FCS Error Counter */ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + int Rtv; /* Return value */ + int i; + + pPrt = &pAC->GIni.GP[Port]; + + /* Default: no action */ + Rtv = SK_HW_PS_NONE; + + (void)SkXmUpdateStats(pAC, IoC, Port); + + /* Extra precaution: check for short Event counter */ + (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts); + + /* + * Read Rx counters (packets seen on the network and not necessarily + * really received. + */ + RxCts = 0; + + for (i = 0; i < sizeof(SkGeRxRegs)/sizeof(SkGeRxRegs[0]); i++) { + + (void)SkXmMacStatistic(pAC, IoC, Port, SkGeRxRegs[i], &RxTmp); + + RxCts += (SK_U64)RxTmp; + } + + /* On default: check shorts against zero */ + CheckShorts = 0; + + /* Extra precaution on active links */ + if (pPrt->PHWLinkUp) { + /* Reset Link Restart counter */ + pPrt->PLinkResCt = 0; + pPrt->PAutoNegTOCt = 0; + + /* If link is up check for 2 */ + CheckShorts = 2; + + (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXF_FCS_ERR, &FcsErrCts); + + if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && + pPrt->PLipaAutoNeg == SK_LIPA_UNKNOWN && + (pPrt->PLinkMode == SK_LMODE_HALF || + pPrt->PLinkMode == SK_LMODE_FULL)) { + /* + * This is autosensing and we are in the fallback + * manual full/half duplex mode. + */ + if (RxCts == pPrt->PPrevRx) { + /* Nothing received, restart link */ + pPrt->PPrevFcs = FcsErrCts; + pPrt->PPrevShorts = Shorts; + + return(SK_HW_PS_RESTART); + } + else { + pPrt->PLipaAutoNeg = SK_LIPA_MANUAL; + } + } + + if (((RxCts - pPrt->PPrevRx) > pPrt->PRxLim) || + (!(FcsErrCts - pPrt->PPrevFcs))) { + /* + * Note: The compare with zero above has to be done the way shown, + * otherwise the Linux driver will have a problem. + */ + /* + * We received a bunch of frames or no CRC error occured on the + * network -> ok. + */ + pPrt->PPrevRx = RxCts; + pPrt->PPrevFcs = FcsErrCts; + pPrt->PPrevShorts = Shorts; + + return(SK_HW_PS_NONE); + } + + pPrt->PPrevFcs = FcsErrCts; + } + + + if ((Shorts - pPrt->PPrevShorts) > CheckShorts) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Short Event Count Restart Port %d \n", Port)); + Rtv = SK_HW_PS_RESTART; + } + + pPrt->PPrevShorts = Shorts; + pPrt->PPrevRx = RxCts; + + return(Rtv); +} /* SkGePortCheckShorts */ +#endif /* GENESIS */ + + +/****************************************************************************** + * + * SkGePortCheckUp() - Check if the link is up + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUp( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port) /* Which port should be checked */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_BOOL AutoNeg; /* Is Auto-negotiation used ? */ + int Rtv; /* Return value */ + + Rtv = SK_HW_PS_NONE; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { + AutoNeg = SK_FALSE; + } + else { + AutoNeg = SK_TRUE; + } + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + switch (pPrt->PhyType) { + + case SK_PHY_XMAC: + Rtv = SkGePortCheckUpXmac(pAC, IoC, Port, AutoNeg); + break; + case SK_PHY_BCOM: + Rtv = SkGePortCheckUpBcom(pAC, IoC, Port, AutoNeg); + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + Rtv = SkGePortCheckUpLone(pAC, IoC, Port, AutoNeg); + break; + case SK_PHY_NAT: + Rtv = SkGePortCheckUpNat(pAC, IoC, Port, AutoNeg); + break; +#endif /* OTHER_PHY */ + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + Rtv = SkGePortCheckUpGmac(pAC, IoC, Port, AutoNeg); + } +#endif /* YUKON */ + + return(Rtv); +} /* SkGePortCheckUp */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkGePortCheckUpXmac() - Implementing of the Workaround Errata # 2 + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUpXmac( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port, /* Which port should be checked */ +SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ +{ + SK_U32 Shorts; /* Short Event Counter */ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + int Done; + SK_U32 GpReg; /* General Purpose register value */ + SK_U16 Isrc; /* Interrupt source register */ + SK_U16 IsrcSum; /* Interrupt source register sum */ + SK_U16 LpAb; /* Link Partner Ability */ + SK_U16 ResAb; /* Resolved Ability */ + SK_U16 ExtStat; /* Extended Status Register */ + SK_U8 NextMode; /* Next AutoSensing Mode */ + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PHWLinkUp) { + if (pPrt->PhyType != SK_PHY_XMAC) { + return(SK_HW_PS_NONE); + } + else { + return(SkGePortCheckShorts(pAC, IoC, Port)); + } + } + + IsrcSum = pPrt->PIsave; + pPrt->PIsave = 0; + + /* Now wait for each port's link */ + if (pPrt->PLinkBroken) { + /* Link was broken */ + XM_IN32(IoC, Port, XM_GP_PORT, &GpReg); + + if ((GpReg & XM_GP_INP_ASS) == 0) { + /* The Link is in sync */ + XM_IN16(IoC, Port, XM_ISRC, &Isrc); + IsrcSum |= Isrc; + SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum); + + if ((Isrc & XM_IS_INP_ASS) == 0) { + /* It has been in sync since last time */ + /* Restart the PORT */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link in sync Restart Port %d\n", Port)); + + (void)SkXmUpdateStats(pAC, IoC, Port); + + /* We now need to reinitialize the PrevShorts counter */ + (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXE_SHT_ERR, &Shorts); + pPrt->PPrevShorts = Shorts; + + pPrt->PLinkBroken = SK_FALSE; + + /* + * Link Restart Workaround: + * it may be possible that the other Link side + * restarts its link as well an we detect + * another LinkBroken. To prevent this + * happening we check for a maximum number + * of consecutive restart. If those happens, + * we do NOT restart the active link and + * check whether the link is now o.k. + */ + pPrt->PLinkResCt++; + + pPrt->PAutoNegTimeOut = 0; + + if (pPrt->PLinkResCt < SK_MAX_LRESTART) { + return(SK_HW_PS_RESTART); + } + + pPrt->PLinkResCt = 0; + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Do NOT restart on Port %d %x %x\n", Port, Isrc, IsrcSum)); + } + else { + pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Save Sync/nosync Port %d %x %x\n", Port, Isrc, IsrcSum)); + + /* Do nothing more if link is broken */ + return(SK_HW_PS_NONE); + } + } + else { + /* Do nothing more if link is broken */ + return(SK_HW_PS_NONE); + } + + } + else { + /* Link was not broken, check if it is */ + XM_IN16(IoC, Port, XM_ISRC, &Isrc); + IsrcSum |= Isrc; + if ((Isrc & XM_IS_INP_ASS) != 0) { + XM_IN16(IoC, Port, XM_ISRC, &Isrc); + IsrcSum |= Isrc; + if ((Isrc & XM_IS_INP_ASS) != 0) { + XM_IN16(IoC, Port, XM_ISRC, &Isrc); + IsrcSum |= Isrc; + if ((Isrc & XM_IS_INP_ASS) != 0) { + pPrt->PLinkBroken = SK_TRUE; + /* Re-Init Link partner Autoneg flag */ + pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN; + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link broken Port %d\n", Port)); + + /* Cable removed-> reinit sense mode */ + SkHWInitDefSense(pAC, IoC, Port); + + return(SK_HW_PS_RESTART); + } + } + } + else { + SkXmAutoNegLipaXmac(pAC, IoC, Port, Isrc); + + if (SkGePortCheckShorts(pAC, IoC, Port) == SK_HW_PS_RESTART) { + return(SK_HW_PS_RESTART); + } + } + } + + /* + * here we usually can check whether the link is in sync and + * auto-negotiation is done. + */ + XM_IN32(IoC, Port, XM_GP_PORT, &GpReg); + XM_IN16(IoC, Port, XM_ISRC, &Isrc); + IsrcSum |= Isrc; + + SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum); + + if ((GpReg & XM_GP_INP_ASS) != 0 || (IsrcSum & XM_IS_INP_ASS) != 0) { + if ((GpReg & XM_GP_INP_ASS) == 0) { + /* Save Auto-negotiation Done interrupt only if link is in sync */ + pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND); + } +#ifdef DEBUG + if ((pPrt->PIsave & XM_IS_AND) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg done rescheduled Port %d\n", Port)); + } +#endif /* DEBUG */ + return(SK_HW_PS_NONE); + } + + if (AutoNeg) { + if ((IsrcSum & XM_IS_AND) != 0) { + SkHWLinkUp(pAC, IoC, Port); + Done = SkMacAutoNegDone(pAC, IoC, Port); + if (Done != SK_AND_OK) { + /* Get PHY parameters, for debugging only */ + SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LpAb); + SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg FAIL Port %d (LpAb %x, ResAb %x)\n", + Port, LpAb, ResAb)); + + /* Try next possible mode */ + NextMode = SkHWSenseGetNext(pAC, IoC, Port); + SkHWLinkDown(pAC, IoC, Port); + if (Done == SK_AND_DUP_CAP) { + /* GoTo next mode */ + SkHWSenseSetNext(pAC, IoC, Port, NextMode); + } + + return(SK_HW_PS_RESTART); + } + /* + * Dummy Read extended status to prevent extra link down/ups + * (clear Page Received bit if set) + */ + SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_EXP, &ExtStat); + + return(SK_HW_PS_LINK); + } + + /* AutoNeg not done, but HW link is up. Check for timeouts */ + pPrt->PAutoNegTimeOut++; + if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) { + /* Increase the Timeout counter */ + pPrt->PAutoNegTOCt++; + + /* Timeout occured */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("AutoNeg timeout Port %d\n", Port)); + if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && + pPrt->PLipaAutoNeg != SK_LIPA_AUTO) { + /* Set Link manually up */ + SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Set manual full duplex Port %d\n", Port)); + } + + if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && + pPrt->PLipaAutoNeg == SK_LIPA_AUTO && + pPrt->PAutoNegTOCt >= SK_MAX_ANEG_TO) { + /* + * This is rather complicated. + * we need to check here whether the LIPA_AUTO + * we saw before is false alert. We saw at one + * switch ( SR8800) that on boot time it sends + * just one auto-neg packet and does no further + * auto-negotiation. + * Solution: we restart the autosensing after + * a few timeouts. + */ + pPrt->PAutoNegTOCt = 0; + pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN; + SkHWInitDefSense(pAC, IoC, Port); + } + + /* Do the restart */ + return(SK_HW_PS_RESTART); + } + } + else { + /* Link is up and we don't need more */ +#ifdef DEBUG + if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("ERROR: Lipa auto detected on port %d\n", Port)); + } +#endif /* DEBUG */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link sync(GP), Port %d\n", Port)); + SkHWLinkUp(pAC, IoC, Port); + + /* + * Link sync (GP) and so assume a good connection. But if not received + * a bunch of frames received in a time slot (maybe broken tx cable) + * the port is restart. + */ + return(SK_HW_PS_LINK); + } + + return(SK_HW_PS_NONE); +} /* SkGePortCheckUpXmac */ + + +/****************************************************************************** + * + * SkGePortCheckUpBcom() - Check if the link is up on Bcom PHY + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUpBcom( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port, /* Which port should be checked */ +SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + int Done; + SK_U16 Isrc; /* Interrupt source register */ + SK_U16 PhyStat; /* Phy Status Register */ + SK_U16 ResAb; /* Master/Slave resolution */ + SK_U16 Ctrl; /* Broadcom control flags */ +#ifdef DEBUG + SK_U16 LpAb; + SK_U16 ExtStat; +#endif /* DEBUG */ + + pPrt = &pAC->GIni.GP[Port]; + + /* Check for No HCD Link events (#10523) */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &Isrc); + +#ifdef xDEBUG + if ((Isrc & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) == + (PHY_B_IS_SCR_S_ER | PHY_B_IS_RRS_CHANGE | PHY_B_IS_LRS_CHANGE)) { + + SK_U32 Stat1, Stat2, Stat3; + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1); + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "CheckUp1 - Stat: %x, Mask: %x", + (void *)Isrc, + (void *)Stat1); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &Stat2); + Stat1 = Stat1 << 16 | Stat2; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3); + Stat2 = Stat2 << 16 | Stat3; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "Ctrl/Stat: %x, AN Adv/LP: %x", + (void *)Stat1, + (void *)Stat2); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2); + Stat1 = Stat1 << 16 | Stat2; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &Stat3); + Stat2 = Stat2 << 16 | Stat3; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x", + (void *)Stat1, + (void *)Stat2); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2); + Stat1 = Stat1 << 16 | Stat2; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3); + Stat2 = Stat2 << 16 | Stat3; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x", + (void *)Stat1, + (void *)Stat2); + } +#endif /* DEBUG */ + + if ((Isrc & (PHY_B_IS_NO_HDCL /* | PHY_B_IS_NO_HDC */)) != 0) { + /* + * Workaround BCom Errata: + * enable and disable loopback mode if "NO HCD" occurs. + */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Ctrl); + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, + (SK_U16)(Ctrl | PHY_CT_LOOP)); + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, + (SK_U16)(Ctrl & ~PHY_CT_LOOP)); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("No HCD Link event, Port %d\n", Port)); +#ifdef xDEBUG + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "No HCD link event, port %d.", + (void *)Port, + (void *)NULL); +#endif /* DEBUG */ + } + + /* Not obsolete: link status bit is latched to 0 and autoclearing! */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); + + if (pPrt->PHWLinkUp) { + return(SK_HW_PS_NONE); + } + +#ifdef xDEBUG + { + SK_U32 Stat1, Stat2, Stat3; + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_MASK, &Stat1); + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "CheckUp1a - Stat: %x, Mask: %x", + (void *)Isrc, + (void *)Stat1); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_CTRL, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); + Stat1 = Stat1 << 16 | PhyStat; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &Stat3); + Stat2 = Stat2 << 16 | Stat3; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "Ctrl/Stat: %x, AN Adv/LP: %x", + (void *)Stat1, + (void *)Stat2); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_EXP, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_EXT_STAT, &Stat2); + Stat1 = Stat1 << 16 | Stat2; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb); + Stat2 = Stat2 << 16 | ResAb; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "AN Exp/IEEE Ext: %x, 1000T Ctrl/Stat: %x", + (void *)Stat1, + (void *)Stat2); + + Stat1 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, &Stat1); + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_P_EXT_STAT, &Stat2); + Stat1 = Stat1 << 16 | Stat2; + Stat2 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Stat2); + Stat3 = 0; + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &Stat3); + Stat2 = Stat2 << 16 | Stat3; + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "PHY Ext Ctrl/Stat: %x, Aux Ctrl/Stat: %x", + (void *)Stat1, + (void *)Stat2); + } +#endif /* DEBUG */ + + /* + * Here we usually can check whether the link is in sync and + * auto-negotiation is done. + */ + + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); + + SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat)); + + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb); + + if ((ResAb & PHY_B_1000S_MSF) != 0) { + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Master/Slave Fault port %d\n", Port)); + + pPrt->PAutoNegFail = SK_TRUE; + pPrt->PMSStatus = SK_MS_STAT_FAULT; + + return(SK_HW_PS_RESTART); + } + + if ((PhyStat & PHY_ST_LSYNC) == 0) { + return(SK_HW_PS_NONE); + } + + pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? + SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Port %d, ResAb: 0x%04X\n", Port, ResAb)); + + if (AutoNeg) { + if ((PhyStat & PHY_ST_AN_OVER) != 0) { + + SkHWLinkUp(pAC, IoC, Port); + + Done = SkMacAutoNegDone(pAC, IoC, Port); + + if (Done != SK_AND_OK) { +#ifdef DEBUG + /* Get PHY parameters, for debugging only */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LpAb); + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ExtStat); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n", + Port, LpAb, ExtStat)); +#endif /* DEBUG */ + return(SK_HW_PS_RESTART); + } + else { +#ifdef xDEBUG + /* Dummy read ISR to prevent extra link downs/ups */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat); + + if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) { + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "CheckUp2 - Stat: %x", + (void *)ExtStat, + (void *)NULL); + } +#endif /* DEBUG */ + return(SK_HW_PS_LINK); + } + } + } + else { /* !AutoNeg */ + /* Link is up and we don't need more. */ +#ifdef DEBUG + if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("ERROR: Lipa auto detected on port %d\n", Port)); + } +#endif /* DEBUG */ + +#ifdef xDEBUG + /* Dummy read ISR to prevent extra link downs/ups */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_INT_STAT, &ExtStat); + + if ((ExtStat & ~(PHY_B_IS_HCT | PHY_B_IS_LCT)) != 0) { + CMSMPrintString( + pAC->pConfigTable, + MSG_TYPE_RUNTIME_INFO, + "CheckUp3 - Stat: %x", + (void *)ExtStat, + (void *)NULL); + } +#endif /* DEBUG */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link sync(GP), Port %d\n", Port)); + SkHWLinkUp(pAC, IoC, Port); + + return(SK_HW_PS_LINK); + } + + return(SK_HW_PS_NONE); +} /* SkGePortCheckUpBcom */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkGePortCheckUpGmac() - Check if the link is up on Marvell PHY + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUpGmac( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port, /* Which port should be checked */ +SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + int Done; + SK_U16 PhyIsrc; /* PHY Interrupt source */ + SK_U16 PhyStat; /* PPY Status */ + SK_U16 PhySpecStat;/* PHY Specific Status */ + SK_U16 ResAb; /* Master/Slave resolution */ + SK_EVPARA Para; +#ifdef DEBUG + SK_U16 Word; /* I/O helper */ +#endif /* DEBUG */ + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PHWLinkUp) { + return(SK_HW_PS_NONE); + } + + /* Read PHY Status */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("CheckUp Port %d, PhyStat: 0x%04X\n", Port, PhyStat)); + + /* Read PHY Interrupt Status */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_INT_STAT, &PhyIsrc); + + if ((PhyIsrc & PHY_M_IS_AN_COMPL) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Auto-Negotiation Completed, PhyIsrc: 0x%04X\n", PhyIsrc)); + } + + if ((PhyIsrc & PHY_M_IS_LSP_CHANGE) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Link Speed Changed, PhyIsrc: 0x%04X\n", PhyIsrc)); + } + + SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); + + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb); + + if ((ResAb & PHY_B_1000S_MSF) != 0) { + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Master/Slave Fault port %d\n", Port)); + + pPrt->PAutoNegFail = SK_TRUE; + pPrt->PMSStatus = SK_MS_STAT_FAULT; + + return(SK_HW_PS_RESTART); + } + + /* Read PHY Specific Status */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Phy1000BT: 0x%04X, PhySpecStat: 0x%04X\n", ResAb, PhySpecStat)); + +#ifdef DEBUG + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_EXP, &Word); + + if ((PhyIsrc & PHY_M_IS_AN_PR) != 0 || (Word & PHY_ANE_RX_PG) != 0 || + (PhySpecStat & PHY_M_PS_PAGE_REC) != 0) { + /* Read PHY Next Page Link Partner */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_NEPG_LP, &Word); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Page Received, NextPage: 0x%04X\n", Word)); + } +#endif /* DEBUG */ + + if ((PhySpecStat & PHY_M_PS_LINK_UP) == 0) { + return(SK_HW_PS_NONE); + } + + if ((PhySpecStat & PHY_M_PS_DOWNS_STAT) != 0 || + (PhyIsrc & PHY_M_IS_DOWNSH_DET) != 0) { + /* Downshift detected */ + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E025, SKERR_SIRQ_E025MSG); + + Para.Para64 = Port; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_DOWNSHIFT_DET, Para); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Downshift detected, PhyIsrc: 0x%04X\n", PhyIsrc)); + } + + pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? + SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; + + pPrt->PCableLen = (SK_U8)((PhySpecStat & PHY_M_PS_CABLE_MSK) >> 7); + + if (AutoNeg) { + /* Auto-Negotiation Over ? */ + if ((PhyStat & PHY_ST_AN_OVER) != 0) { + + SkHWLinkUp(pAC, IoC, Port); + + Done = SkMacAutoNegDone(pAC, IoC, Port); + + if (Done != SK_AND_OK) { + return(SK_HW_PS_RESTART); + } + + return(SK_HW_PS_LINK); + } + } + else { /* !AutoNeg */ + /* Link is up and we don't need more */ +#ifdef DEBUG + if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("ERROR: Lipa auto detected on port %d\n", Port)); + } +#endif /* DEBUG */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link sync, Port %d\n", Port)); + SkHWLinkUp(pAC, IoC, Port); + + return(SK_HW_PS_LINK); + } + + return(SK_HW_PS_NONE); +} /* SkGePortCheckUpGmac */ +#endif /* YUKON */ + + +#ifdef OTHER_PHY +/****************************************************************************** + * + * SkGePortCheckUpLone() - Check if the link is up on Level One PHY + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUpLone( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port, /* Which port should be checked */ +SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + int Done; + SK_U16 Isrc; /* Interrupt source register */ + SK_U16 LpAb; /* Link Partner Ability */ + SK_U16 ExtStat; /* Extended Status Register */ + SK_U16 PhyStat; /* Phy Status Register */ + SK_U16 StatSum; + SK_U8 NextMode; /* Next AutoSensing Mode */ + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PHWLinkUp) { + return(SK_HW_PS_NONE); + } + + StatSum = pPrt->PIsave; + pPrt->PIsave = 0; + + /* + * here we usually can check whether the link is in sync and + * auto-negotiation is done. + */ + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_STAT, &PhyStat); + StatSum |= PhyStat; + + SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); + + if ((PhyStat & PHY_ST_LSYNC) == 0) { + /* Save Auto-negotiation Done bit */ + pPrt->PIsave = (SK_U16)(StatSum & PHY_ST_AN_OVER); +#ifdef DEBUG + if ((pPrt->PIsave & PHY_ST_AN_OVER) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg done rescheduled Port %d\n", Port)); + } +#endif /* DEBUG */ + return(SK_HW_PS_NONE); + } + + if (AutoNeg) { + if ((StatSum & PHY_ST_AN_OVER) != 0) { + SkHWLinkUp(pAC, IoC, Port); + Done = SkMacAutoNegDone(pAC, IoC, Port); + if (Done != SK_AND_OK) { + /* Get PHY parameters, for debugging only */ + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LpAb); + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ExtStat); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n", + Port, LpAb, ExtStat)); + + /* Try next possible mode */ + NextMode = SkHWSenseGetNext(pAC, IoC, Port); + SkHWLinkDown(pAC, IoC, Port); + if (Done == SK_AND_DUP_CAP) { + /* GoTo next mode */ + SkHWSenseSetNext(pAC, IoC, Port, NextMode); + } + + return(SK_HW_PS_RESTART); + + } + else { + /* + * Dummy Read interrupt status to prevent + * extra link down/ups + */ + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat); + return(SK_HW_PS_LINK); + } + } + + /* AutoNeg not done, but HW link is up. Check for timeouts */ + pPrt->PAutoNegTimeOut++; + if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) { + /* Timeout occured */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("AutoNeg timeout Port %d\n", Port)); + if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && + pPrt->PLipaAutoNeg != SK_LIPA_AUTO) { + /* Set Link manually up */ + SkHWSenseSetNext(pAC, IoC, Port, SK_LMODE_FULL); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Set manual full duplex Port %d\n", Port)); + } + + /* Do the restart */ + return(SK_HW_PS_RESTART); + } + } + else { + /* Link is up and we don't need more */ +#ifdef DEBUG + if (pPrt->PLipaAutoNeg == SK_LIPA_AUTO) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("ERROR: Lipa auto detected on port %d\n", Port)); + } +#endif /* DEBUG */ + + /* + * Dummy Read interrupt status to prevent + * extra link down/ups + */ + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("Link sync(GP), Port %d\n", Port)); + SkHWLinkUp(pAC, IoC, Port); + + return(SK_HW_PS_LINK); + } + + return(SK_HW_PS_NONE); +} /* SkGePortCheckUpLone */ + + +/****************************************************************************** + * + * SkGePortCheckUpNat() - Check if the link is up on National PHY + * + * return: + * 0 o.k. nothing needed + * 1 Restart needed on this port + * 2 Link came up + */ +static int SkGePortCheckUpNat( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO Context */ +int Port, /* Which port should be checked */ +SK_BOOL AutoNeg) /* Is Auto-negotiation used ? */ +{ + /* todo: National */ + return(SK_HW_PS_NONE); +} /* SkGePortCheckUpNat */ +#endif /* OTHER_PHY */ + + +/****************************************************************************** + * + * SkGeSirqEvent() - Event Service Routine + * + * Description: + * + * Notes: + */ +int SkGeSirqEvent( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* Io Context */ +SK_U32 Event, /* Module specific Event */ +SK_EVPARA Para) /* Event specific Parameter */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_U32 Port; + SK_U32 Val32; + int PortStat; + SK_U8 Val8; +#ifdef GENESIS + SK_U64 Octets; +#endif /* GENESIS */ + + Port = Para.Para32[0]; + pPrt = &pAC->GIni.GP[Port]; + + switch (Event) { + case SK_HWEV_WATIM: + if (pPrt->PState == SK_PRT_RESET) { + + PortStat = SK_HW_PS_NONE; + } + else { + /* Check whether port came up */ + PortStat = SkGePortCheckUp(pAC, IoC, (int)Port); + } + + switch (PortStat) { + case SK_HW_PS_RESTART: + if (pPrt->PHWLinkUp) { + /* Set Link to down */ + SkHWLinkDown(pAC, IoC, (int)Port); + + /* + * Signal directly to RLMT to ensure correct + * sequence of SWITCH and RESET event. + */ + SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para); + } + + /* Restart needed */ + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para); + break; + + case SK_HW_PS_LINK: + /* Signal to RLMT */ + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_UP, Para); + break; + } + + /* Start again the check Timer */ + if (pPrt->PHWLinkUp) { + Val32 = SK_WA_ACT_TIME; + } + else { + Val32 = SK_WA_INA_TIME; + } + + /* Todo: still needed for non-XMAC PHYs??? */ + /* Start workaround Errata #2 timer */ + SkTimerStart(pAC, IoC, &pPrt->PWaTimer, Val32, + SKGE_HWAC, SK_HWEV_WATIM, Para); + break; + + case SK_HWEV_PORT_START: + if (pPrt->PHWLinkUp) { + /* + * Signal directly to RLMT to ensure correct + * sequence of SWITCH and RESET event. + */ + SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para); + } + + SkHWLinkDown(pAC, IoC, (int)Port); + + /* Schedule Port RESET */ + SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Para); + + /* Start workaround Errata #2 timer */ + SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME, + SKGE_HWAC, SK_HWEV_WATIM, Para); + break; + + case SK_HWEV_PORT_STOP: + if (pPrt->PHWLinkUp) { + /* + * Signal directly to RLMT to ensure correct + * sequence of SWITCH and RESET event. + */ + SkRlmtEvent(pAC, IoC, SK_RLMT_LINK_DOWN, Para); + } + + /* Stop Workaround Timer */ + SkTimerStop(pAC, IoC, &pPrt->PWaTimer); + + SkHWLinkDown(pAC, IoC, (int)Port); + break; + + case SK_HWEV_UPDATE_STAT: + /* We do NOT need to update any statistics */ + break; + + case SK_HWEV_CLEAR_STAT: + /* We do NOT need to clear any statistics */ + for (Port = 0; Port < (SK_U32)pAC->GIni.GIMacsFound; Port++) { + pPrt->PPrevRx = 0; + pPrt->PPrevFcs = 0; + pPrt->PPrevShorts = 0; + } + break; + + case SK_HWEV_SET_LMODE: + Val8 = (SK_U8)Para.Para32[1]; + if (pPrt->PLinkModeConf != Val8) { + /* Set New link mode */ + pPrt->PLinkModeConf = Val8; + + /* Restart Port */ + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); + } + break; + + case SK_HWEV_SET_FLOWMODE: + Val8 = (SK_U8)Para.Para32[1]; + if (pPrt->PFlowCtrlMode != Val8) { + /* Set New Flow Control mode */ + pPrt->PFlowCtrlMode = Val8; + + /* Restart Port */ + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); + } + break; + + case SK_HWEV_SET_ROLE: + /* not possible for fiber */ + if (!pAC->GIni.GICopperType) { + break; + } + Val8 = (SK_U8)Para.Para32[1]; + if (pPrt->PMSMode != Val8) { + /* Set New Role (Master/Slave) mode */ + pPrt->PMSMode = Val8; + + /* Restart Port */ + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); + } + break; + + case SK_HWEV_SET_SPEED: + if (pPrt->PhyType != SK_PHY_MARV_COPPER) { + break; + } + Val8 = (SK_U8)Para.Para32[1]; + if (pPrt->PLinkSpeed != Val8) { + /* Set New Speed parameter */ + pPrt->PLinkSpeed = Val8; + + /* Restart Port */ + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para); + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); + } + break; + +#ifdef GENESIS + case SK_HWEV_HALFDUP_CHK: + if (pAC->GIni.GIGenesis) { + /* + * half duplex hangup workaround. + * See packet arbiter timeout interrupt for description + */ + pPrt->HalfDupTimerActive = SK_FALSE; + if (pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || + pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) { + /* Snap statistic counters */ + (void)SkXmUpdateStats(pAC, IoC, Port); + + (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_HI, &Val32); + + Octets = (SK_U64)Val32 << 32; + + (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXO_OK_LO, &Val32); + + Octets += Val32; + + if (pPrt->LastOctets == Octets) { + /* Tx hanging, a FIFO flush restarts it */ + SkMacFlushTxFifo(pAC, IoC, Port); + } + } + } + break; +#endif /* GENESIS */ + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_SIRQ_E001, SKERR_SIRQ_E001MSG); + break; + } + + return(0); +} /* SkGeSirqEvent */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkPhyIsrBcom() - PHY interrupt service routine + * + * Description: handles all interrupts from BCom PHY + * + * Returns: N/A + */ +static void SkPhyIsrBcom( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* Io Context */ +int Port, /* Port Num = PHY Num */ +SK_U16 IStatus) /* Interrupt Status */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_EVPARA Para; + + pPrt = &pAC->GIni.GP[Port]; + + if ((IStatus & PHY_B_IS_PSE) != 0) { + /* Incorrectable pair swap error */ + SK_ERR_LOG(pAC, SK_ERRCL_HW | SK_ERRCL_INIT, SKERR_SIRQ_E022, + SKERR_SIRQ_E022MSG); + } + + if ((IStatus & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) != 0) { + + SkHWLinkDown(pAC, IoC, Port); + + Para.Para32[0] = (SK_U32)Port; + /* Signal to RLMT */ + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + + /* Start workaround Errata #2 timer */ + SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME, + SKGE_HWAC, SK_HWEV_WATIM, Para); + } + +} /* SkPhyIsrBcom */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkPhyIsrGmac() - PHY interrupt service routine + * + * Description: handles all interrupts from Marvell PHY + * + * Returns: N/A + */ +static void SkPhyIsrGmac( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* Io Context */ +int Port, /* Port Num = PHY Num */ +SK_U16 IStatus) /* Interrupt Status */ +{ + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + SK_EVPARA Para; + SK_U16 Word; + + pPrt = &pAC->GIni.GP[Port]; + + if ((IStatus & (PHY_M_IS_AN_PR | PHY_M_IS_LST_CHANGE)) != 0) { + + SkHWLinkDown(pAC, IoC, Port); + + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &Word); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg.Adv: 0x%04X\n", Word)); + + /* Set Auto-negotiation advertisement */ + if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) { + /* restore Asymmetric Pause bit */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV, + (SK_U16)(Word | PHY_M_AN_ASP)); + } + + Para.Para32[0] = (SK_U32)Port; + /* Signal to RLMT */ + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + + if ((IStatus & PHY_M_IS_AN_ERROR) != 0) { + /* Auto-Negotiation Error */ + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E023, SKERR_SIRQ_E023MSG); + } + + if ((IStatus & PHY_M_IS_FIFO_ERROR) != 0) { + /* FIFO Overflow/Underrun Error */ + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E024, SKERR_SIRQ_E024MSG); + } + +} /* SkPhyIsrGmac */ +#endif /* YUKON */ + + +#ifdef OTHER_PHY +/****************************************************************************** + * + * SkPhyIsrLone() - PHY interrupt service routine + * + * Description: handles all interrupts from LONE PHY + * + * Returns: N/A + */ +static void SkPhyIsrLone( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* Io Context */ +int Port, /* Port Num = PHY Num */ +SK_U16 IStatus) /* Interrupt Status */ +{ + SK_EVPARA Para; + + if (IStatus & (PHY_L_IS_DUP | PHY_L_IS_ISOL)) { + + SkHWLinkDown(pAC, IoC, Port); + + Para.Para32[0] = (SK_U32)Port; + /* Signal to RLMT */ + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + } + +} /* SkPhyIsrLone */ +#endif /* OTHER_PHY */ + +/* End of File */ diff --git a/drivers/net/sk98lin/ski2c.c b/drivers/net/sk98lin/ski2c.c new file mode 100644 index 00000000000..79bf57cb532 --- /dev/null +++ b/drivers/net/sk98lin/ski2c.c @@ -0,0 +1,1296 @@ +/****************************************************************************** + * + * Name: ski2c.c + * Project: Gigabit Ethernet Adapters, TWSI-Module + * Version: $Revision: 1.59 $ + * Date: $Date: 2003/10/20 09:07:25 $ + * Purpose: Functions to access Voltage and Temperature Sensor + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + * I2C Protocol + */ +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: ski2c.c,v 1.59 2003/10/20 09:07:25 rschmidt Exp $ (C) Marvell. "; +#endif + +#include "h/skdrv1st.h" /* Driver Specific Definitions */ +#include "h/lm80.h" +#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */ + +#ifdef __C2MAN__ +/* + I2C protocol implementation. + + General Description: + + The I2C protocol is used for the temperature sensors and for + the serial EEPROM which hold the configuration. + + This file covers functions that allow to read write and do + some bulk requests a specified I2C address. + + The Genesis has 2 I2C buses. One for the EEPROM which holds + the VPD Data and one for temperature and voltage sensor. + The following picture shows the I2C buses, I2C devices and + their control registers. + + Note: The VPD functions are in skvpd.c +. +. PCI Config I2C Bus for VPD Data: +. +. +------------+ +. | VPD EEPROM | +. +------------+ +. | +. | <-- I2C +. | +. +-----------+-----------+ +. | | +. +-----------------+ +-----------------+ +. | PCI_VPD_ADR_REG | | PCI_VPD_DAT_REG | +. +-----------------+ +-----------------+ +. +. +. I2C Bus for LM80 sensor: +. +. +-----------------+ +. | Temperature and | +. | Voltage Sensor | +. | LM80 | +. +-----------------+ +. | +. | +. I2C --> | +. | +. +----+ +. +-------------->| OR |<--+ +. | +----+ | +. +------+------+ | +. | | | +. +--------+ +--------+ +----------+ +. | B2_I2C | | B2_I2C | | B2_I2C | +. | _CTRL | | _DATA | | _SW | +. +--------+ +--------+ +----------+ +. + The I2C bus may be driven by the B2_I2C_SW or by the B2_I2C_CTRL + and B2_I2C_DATA registers. + For driver software it is recommended to use the I2C control and + data register, because I2C bus timing is done by the ASIC and + an interrupt may be received when the I2C request is completed. + + Clock Rate Timing: MIN MAX generated by + VPD EEPROM: 50 kHz 100 kHz HW + LM80 over I2C Ctrl/Data reg. 50 kHz 100 kHz HW + LM80 over B2_I2C_SW register 0 400 kHz SW + + Note: The clock generated by the hardware is dependend on the + PCI clock. If the PCI bus clock is 33 MHz, the I2C/VPD + clock is 50 kHz. + */ +intro() +{} +#endif + +#ifdef SK_DIAG +/* + * I2C Fast Mode timing values used by the LM80. + * If new devices are added to the I2C bus the timing values have to be checked. + */ +#ifndef I2C_SLOW_TIMING +#define T_CLK_LOW 1300L /* clock low time in ns */ +#define T_CLK_HIGH 600L /* clock high time in ns */ +#define T_DATA_IN_SETUP 100L /* data in Set-up Time */ +#define T_START_HOLD 600L /* start condition hold time */ +#define T_START_SETUP 600L /* start condition Set-up time */ +#define T_STOP_SETUP 600L /* stop condition Set-up time */ +#define T_BUS_IDLE 1300L /* time the bus must free after Tx */ +#define T_CLK_2_DATA_OUT 900L /* max. clock low to data output valid */ +#else /* I2C_SLOW_TIMING */ +/* I2C Standard Mode Timing */ +#define T_CLK_LOW 4700L /* clock low time in ns */ +#define T_CLK_HIGH 4000L /* clock high time in ns */ +#define T_DATA_IN_SETUP 250L /* data in Set-up Time */ +#define T_START_HOLD 4000L /* start condition hold time */ +#define T_START_SETUP 4700L /* start condition Set-up time */ +#define T_STOP_SETUP 4000L /* stop condition Set-up time */ +#define T_BUS_IDLE 4700L /* time the bus must free after Tx */ +#endif /* !I2C_SLOW_TIMING */ + +#define NS2BCLK(x) (((x)*125)/10000) + +/* + * I2C Wire Operations + * + * About I2C_CLK_LOW(): + * + * The Data Direction bit (I2C_DATA_DIR) has to be set to input when setting + * clock to low, to prevent the ASIC and the I2C data client from driving the + * serial data line simultaneously (ASIC: last bit of a byte = '1', I2C client + * send an 'ACK'). See also Concentrator Bugreport No. 10192. + */ +#define I2C_DATA_HIGH(IoC) SK_I2C_SET_BIT(IoC, I2C_DATA) +#define I2C_DATA_LOW(IoC) SK_I2C_CLR_BIT(IoC, I2C_DATA) +#define I2C_DATA_OUT(IoC) SK_I2C_SET_BIT(IoC, I2C_DATA_DIR) +#define I2C_DATA_IN(IoC) SK_I2C_CLR_BIT(IoC, I2C_DATA_DIR | I2C_DATA) +#define I2C_CLK_HIGH(IoC) SK_I2C_SET_BIT(IoC, I2C_CLK) +#define I2C_CLK_LOW(IoC) SK_I2C_CLR_BIT(IoC, I2C_CLK | I2C_DATA_DIR) +#define I2C_START_COND(IoC) SK_I2C_CLR_BIT(IoC, I2C_CLK) + +#define NS2CLKT(x) ((x*125L)/10000) + +/*--------------- I2C Interface Register Functions --------------- */ + +/* + * sending one bit + */ +void SkI2cSndBit( +SK_IOC IoC, /* I/O Context */ +SK_U8 Bit) /* Bit to send */ +{ + I2C_DATA_OUT(IoC); + if (Bit) { + I2C_DATA_HIGH(IoC); + } + else { + I2C_DATA_LOW(IoC); + } + SkDgWaitTime(IoC, NS2BCLK(T_DATA_IN_SETUP)); + I2C_CLK_HIGH(IoC); + SkDgWaitTime(IoC, NS2BCLK(T_CLK_HIGH)); + I2C_CLK_LOW(IoC); +} /* SkI2cSndBit*/ + + +/* + * Signal a start to the I2C Bus. + * + * A start is signaled when data goes to low in a high clock cycle. + * + * Ends with Clock Low. + * + * Status: not tested + */ +void SkI2cStart( +SK_IOC IoC) /* I/O Context */ +{ + /* Init data and Clock to output lines */ + /* Set Data high */ + I2C_DATA_OUT(IoC); + I2C_DATA_HIGH(IoC); + /* Set Clock high */ + I2C_CLK_HIGH(IoC); + + SkDgWaitTime(IoC, NS2BCLK(T_START_SETUP)); + + /* Set Data Low */ + I2C_DATA_LOW(IoC); + + SkDgWaitTime(IoC, NS2BCLK(T_START_HOLD)); + + /* Clock low without Data to Input */ + I2C_START_COND(IoC); + + SkDgWaitTime(IoC, NS2BCLK(T_CLK_LOW)); +} /* SkI2cStart */ + + +void SkI2cStop( +SK_IOC IoC) /* I/O Context */ +{ + /* Init data and Clock to output lines */ + /* Set Data low */ + I2C_DATA_OUT(IoC); + I2C_DATA_LOW(IoC); + + SkDgWaitTime(IoC, NS2BCLK(T_CLK_2_DATA_OUT)); + + /* Set Clock high */ + I2C_CLK_HIGH(IoC); + + SkDgWaitTime(IoC, NS2BCLK(T_STOP_SETUP)); + + /* + * Set Data High: Do it by setting the Data Line to Input. + * Because of a pull up resistor the Data Line + * floods to high. + */ + I2C_DATA_IN(IoC); + + /* + * When I2C activity is stopped + * o DATA should be set to input and + * o CLOCK should be set to high! + */ + SkDgWaitTime(IoC, NS2BCLK(T_BUS_IDLE)); +} /* SkI2cStop */ + + +/* + * Receive just one bit via the I2C bus. + * + * Note: Clock must be set to LOW before calling this function. + * + * Returns The received bit. + */ +int SkI2cRcvBit( +SK_IOC IoC) /* I/O Context */ +{ + int Bit; + SK_U8 I2cSwCtrl; + + /* Init data as input line */ + I2C_DATA_IN(IoC); + + SkDgWaitTime(IoC, NS2BCLK(T_CLK_2_DATA_OUT)); + + I2C_CLK_HIGH(IoC); + + SkDgWaitTime(IoC, NS2BCLK(T_CLK_HIGH)); + + SK_I2C_GET_SW(IoC, &I2cSwCtrl); + + Bit = (I2cSwCtrl & I2C_DATA) ? 1 : 0; + + I2C_CLK_LOW(IoC); + SkDgWaitTime(IoC, NS2BCLK(T_CLK_LOW-T_CLK_2_DATA_OUT)); + + return(Bit); +} /* SkI2cRcvBit */ + + +/* + * Receive an ACK. + * + * returns 0 If acknowledged + * 1 in case of an error + */ +int SkI2cRcvAck( +SK_IOC IoC) /* I/O Context */ +{ + /* + * Received bit must be zero. + */ + return(SkI2cRcvBit(IoC) != 0); +} /* SkI2cRcvAck */ + + +/* + * Send an NACK. + */ +void SkI2cSndNAck( +SK_IOC IoC) /* I/O Context */ +{ + /* + * Received bit must be zero. + */ + SkI2cSndBit(IoC, 1); +} /* SkI2cSndNAck */ + + +/* + * Send an ACK. + */ +void SkI2cSndAck( +SK_IOC IoC) /* I/O Context */ +{ + /* + * Received bit must be zero. + */ + SkI2cSndBit(IoC, 0); +} /* SkI2cSndAck */ + + +/* + * Send one byte to the I2C device and wait for ACK. + * + * Return acknowleged status. + */ +int SkI2cSndByte( +SK_IOC IoC, /* I/O Context */ +int Byte) /* byte to send */ +{ + int i; + + for (i = 0; i < 8; i++) { + if (Byte & (1<<(7-i))) { + SkI2cSndBit(IoC, 1); + } + else { + SkI2cSndBit(IoC, 0); + } + } + + return(SkI2cRcvAck(IoC)); +} /* SkI2cSndByte */ + + +/* + * Receive one byte and ack it. + * + * Return byte. + */ +int SkI2cRcvByte( +SK_IOC IoC, /* I/O Context */ +int Last) /* Last Byte Flag */ +{ + int i; + int Byte = 0; + + for (i = 0; i < 8; i++) { + Byte <<= 1; + Byte |= SkI2cRcvBit(IoC); + } + + if (Last) { + SkI2cSndNAck(IoC); + } + else { + SkI2cSndAck(IoC); + } + + return(Byte); +} /* SkI2cRcvByte */ + + +/* + * Start dialog and send device address + * + * Return 0 if acknowleged, 1 in case of an error + */ +int SkI2cSndDev( +SK_IOC IoC, /* I/O Context */ +int Addr, /* Device Address */ +int Rw) /* Read / Write Flag */ +{ + SkI2cStart(IoC); + Rw = ~Rw; + Rw &= I2C_WRITE; + return(SkI2cSndByte(IoC, (Addr<<1) | Rw)); +} /* SkI2cSndDev */ + +#endif /* SK_DIAG */ + +/*----------------- I2C CTRL Register Functions ----------*/ + +/* + * waits for a completion of an I2C transfer + * + * returns 0: success, transfer completes + * 1: error, transfer does not complete, I2C transfer + * killed, wait loop terminated. + */ +static int SkI2cWait( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Event) /* complete event to wait for (I2C_READ or I2C_WRITE) */ +{ + SK_U64 StartTime; + SK_U64 CurrentTime; + SK_U32 I2cCtrl; + + StartTime = SkOsGetTime(pAC); + + do { + CurrentTime = SkOsGetTime(pAC); + + if (CurrentTime - StartTime > SK_TICKS_PER_SEC / 8) { + + SK_I2C_STOP(IoC); +#ifndef SK_DIAG + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E002, SKERR_I2C_E002MSG); +#endif /* !SK_DIAG */ + return(1); + } + + SK_I2C_GET_CTL(IoC, &I2cCtrl); + +#ifdef xYUKON_DBG + printf("StartTime=%lu, CurrentTime=%lu\n", + StartTime, CurrentTime); + if (kbhit()) { + return(1); + } +#endif /* YUKON_DBG */ + + } while ((I2cCtrl & I2C_FLAG) == (SK_U32)Event << 31); + + return(0); +} /* SkI2cWait */ + + +/* + * waits for a completion of an I2C transfer + * + * Returns + * Nothing + */ +void SkI2cWaitIrq( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC) /* I/O Context */ +{ + SK_SENSOR *pSen; + SK_U64 StartTime; + SK_U32 IrqSrc; + + pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens]; + + if (pSen->SenState == SK_SEN_IDLE) { + return; + } + + StartTime = SkOsGetTime(pAC); + + do { + if (SkOsGetTime(pAC) - StartTime > SK_TICKS_PER_SEC / 8) { + + SK_I2C_STOP(IoC); +#ifndef SK_DIAG + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E016, SKERR_I2C_E016MSG); +#endif /* !SK_DIAG */ + return; + } + + SK_IN32(IoC, B0_ISRC, &IrqSrc); + + } while ((IrqSrc & IS_I2C_READY) == 0); + + pSen->SenState = SK_SEN_IDLE; + return; +} /* SkI2cWaitIrq */ + +/* + * writes a single byte or 4 bytes into the I2C device + * + * returns 0: success + * 1: error + */ +static int SkI2cWrite( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 I2cData, /* I2C Data to write */ +int I2cDev, /* I2C Device Address */ +int I2cDevSize, /* I2C Device Size (e.g. I2C_025K_DEV or I2C_2K_DEV) */ +int I2cReg, /* I2C Device Register Address */ +int I2cBurst) /* I2C Burst Flag */ +{ + SK_OUT32(IoC, B2_I2C_DATA, I2cData); + + SK_I2C_CTL(IoC, I2C_WRITE, I2cDev, I2cDevSize, I2cReg, I2cBurst); + + return(SkI2cWait(pAC, IoC, I2C_WRITE)); +} /* SkI2cWrite*/ + + +#ifdef SK_DIAG +/* + * reads a single byte or 4 bytes from the I2C device + * + * returns the word read + */ +SK_U32 SkI2cRead( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int I2cDev, /* I2C Device Address */ +int I2cDevSize, /* I2C Device Size (e.g. I2C_025K_DEV or I2C_2K_DEV) */ +int I2cReg, /* I2C Device Register Address */ +int I2cBurst) /* I2C Burst Flag */ +{ + SK_U32 Data; + + SK_OUT32(IoC, B2_I2C_DATA, 0); + SK_I2C_CTL(IoC, I2C_READ, I2cDev, I2cDevSize, I2cReg, I2cBurst); + + if (SkI2cWait(pAC, IoC, I2C_READ) != 0) { + w_print("%s\n", SKERR_I2C_E002MSG); + } + + SK_IN32(IoC, B2_I2C_DATA, &Data); + + return(Data); +} /* SkI2cRead */ +#endif /* SK_DIAG */ + + +/* + * read a sensor's value + * + * This function reads a sensor's value from the I2C sensor chip. The sensor + * is defined by its index into the sensors database in the struct pAC points + * to. + * Returns + * 1 if the read is completed + * 0 if the read must be continued (I2C Bus still allocated) + */ +static int SkI2cReadSensor( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_SENSOR *pSen) /* Sensor to be read */ +{ + if (pSen->SenRead != NULL) { + return((*pSen->SenRead)(pAC, IoC, pSen)); + } + else { + return(0); /* no success */ + } +} /* SkI2cReadSensor */ + +/* + * Do the Init state 0 initialization + */ +static int SkI2cInit0( +SK_AC *pAC) /* Adapter Context */ +{ + int i; + + /* Begin with first sensor */ + pAC->I2c.CurrSens = 0; + + /* Begin with timeout control for state machine */ + pAC->I2c.TimerMode = SK_TIMER_WATCH_SM; + + /* Set sensor number to zero */ + pAC->I2c.MaxSens = 0; + +#ifndef SK_DIAG + /* Initialize Number of Dummy Reads */ + pAC->I2c.DummyReads = SK_MAX_SENSORS; +#endif + + for (i = 0; i < SK_MAX_SENSORS; i++) { + pAC->I2c.SenTable[i].SenDesc = "unknown"; + pAC->I2c.SenTable[i].SenType = SK_SEN_UNKNOWN; + pAC->I2c.SenTable[i].SenThreErrHigh = 0; + pAC->I2c.SenTable[i].SenThreErrLow = 0; + pAC->I2c.SenTable[i].SenThreWarnHigh = 0; + pAC->I2c.SenTable[i].SenThreWarnLow = 0; + pAC->I2c.SenTable[i].SenReg = LM80_FAN2_IN; + pAC->I2c.SenTable[i].SenInit = SK_SEN_DYN_INIT_NONE; + pAC->I2c.SenTable[i].SenValue = 0; + pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_NOT_PRESENT; + pAC->I2c.SenTable[i].SenErrCts = 0; + pAC->I2c.SenTable[i].SenBegErrTS = 0; + pAC->I2c.SenTable[i].SenState = SK_SEN_IDLE; + pAC->I2c.SenTable[i].SenRead = NULL; + pAC->I2c.SenTable[i].SenDev = 0; + } + + /* Now we are "INIT data"ed */ + pAC->I2c.InitLevel = SK_INIT_DATA; + return(0); +} /* SkI2cInit0*/ + + +/* + * Do the init state 1 initialization + * + * initialize the following register of the LM80: + * Configuration register: + * - START, noINT, activeLOW, noINT#Clear, noRESET, noCI, noGPO#, noINIT + * + * Interrupt Mask Register 1: + * - all interrupts are Disabled (0xff) + * + * Interrupt Mask Register 2: + * - all interrupts are Disabled (0xff) Interrupt modi doesn't matter. + * + * Fan Divisor/RST_OUT register: + * - Divisors set to 1 (bits 00), all others 0s. + * + * OS# Configuration/Temperature resolution Register: + * - all 0s + * + */ +static int SkI2cInit1( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC) /* I/O Context */ +{ + int i; + SK_U8 I2cSwCtrl; + SK_GEPORT *pPrt; /* GIni Port struct pointer */ + + if (pAC->I2c.InitLevel != SK_INIT_DATA) { + /* ReInit not needed in I2C module */ + return(0); + } + + /* Set the Direction of I2C-Data Pin to IN */ + SK_I2C_CLR_BIT(IoC, I2C_DATA_DIR | I2C_DATA); + /* Check for 32-Bit Yukon with Low at I2C-Data Pin */ + SK_I2C_GET_SW(IoC, &I2cSwCtrl); + + if ((I2cSwCtrl & I2C_DATA) == 0) { + /* this is a 32-Bit board */ + pAC->GIni.GIYukon32Bit = SK_TRUE; + return(0); + } + + /* Check for 64 Bit Yukon without sensors */ + if (SkI2cWrite(pAC, IoC, 0, LM80_ADDR, I2C_025K_DEV, LM80_CFG, 0) != 0) { + return(0); + } + + (void)SkI2cWrite(pAC, IoC, 0xffUL, LM80_ADDR, I2C_025K_DEV, LM80_IMSK_1, 0); + + (void)SkI2cWrite(pAC, IoC, 0xffUL, LM80_ADDR, I2C_025K_DEV, LM80_IMSK_2, 0); + + (void)SkI2cWrite(pAC, IoC, 0, LM80_ADDR, I2C_025K_DEV, LM80_FAN_CTRL, 0); + + (void)SkI2cWrite(pAC, IoC, 0, LM80_ADDR, I2C_025K_DEV, LM80_TEMP_CTRL, 0); + + (void)SkI2cWrite(pAC, IoC, (SK_U32)LM80_CFG_START, LM80_ADDR, I2C_025K_DEV, + LM80_CFG, 0); + + /* + * MaxSens has to be updated here, because PhyType is not + * set when performing Init Level 0 + */ + pAC->I2c.MaxSens = 5; + + pPrt = &pAC->GIni.GP[0]; + + if (pAC->GIni.GIGenesis) { + if (pPrt->PhyType == SK_PHY_BCOM) { + if (pAC->GIni.GIMacsFound == 1) { + pAC->I2c.MaxSens += 1; + } + else { + pAC->I2c.MaxSens += 3; + } + } + } + else { + pAC->I2c.MaxSens += 3; + } + + for (i = 0; i < pAC->I2c.MaxSens; i++) { + switch (i) { + case 0: + pAC->I2c.SenTable[i].SenDesc = "Temperature"; + pAC->I2c.SenTable[i].SenType = SK_SEN_TEMP; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_TEMP_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_TEMP_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_TEMP_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_TEMP_LOW_ERR; + pAC->I2c.SenTable[i].SenReg = LM80_TEMP_IN; + break; + case 1: + pAC->I2c.SenTable[i].SenDesc = "Voltage PCI"; + pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PCI_5V_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PCI_5V_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PCI_5V_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PCI_5V_LOW_ERR; + pAC->I2c.SenTable[i].SenReg = LM80_VT0_IN; + break; + case 2: + pAC->I2c.SenTable[i].SenDesc = "Voltage PCI-IO"; + pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PCI_IO_5V_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PCI_IO_5V_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PCI_IO_3V3_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PCI_IO_3V3_LOW_ERR; + pAC->I2c.SenTable[i].SenReg = LM80_VT1_IN; + pAC->I2c.SenTable[i].SenInit = SK_SEN_DYN_INIT_PCI_IO; + break; + case 3: + pAC->I2c.SenTable[i].SenDesc = "Voltage ASIC"; + pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_VDD_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_VDD_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VDD_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VDD_LOW_ERR; + pAC->I2c.SenTable[i].SenReg = LM80_VT2_IN; + break; + case 4: + if (pAC->GIni.GIGenesis) { + if (pPrt->PhyType == SK_PHY_BCOM) { + pAC->I2c.SenTable[i].SenDesc = "Voltage PHY A PLL"; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR; + } + else { + pAC->I2c.SenTable[i].SenDesc = "Voltage PMA"; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR; + } + } + else { + pAC->I2c.SenTable[i].SenDesc = "Voltage VAUX"; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_VAUX_3V3_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_VAUX_3V3_HIGH_WARN; + if (pAC->GIni.GIVauxAvail) { + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VAUX_3V3_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VAUX_3V3_LOW_ERR; + } + else { + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_VAUX_0V_WARN_ERR; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_VAUX_0V_WARN_ERR; + } + } + pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; + pAC->I2c.SenTable[i].SenReg = LM80_VT3_IN; + break; + case 5: + if (pAC->GIni.GIGenesis) { + pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 2V5"; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PHY_2V5_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PHY_2V5_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PHY_2V5_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PHY_2V5_LOW_ERR; + } + else { + pAC->I2c.SenTable[i].SenDesc = "Voltage Core 1V5"; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_CORE_1V5_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_CORE_1V5_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_CORE_1V5_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_CORE_1V5_LOW_ERR; + } + pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; + pAC->I2c.SenTable[i].SenReg = LM80_VT4_IN; + break; + case 6: + if (pAC->GIni.GIGenesis) { + pAC->I2c.SenTable[i].SenDesc = "Voltage PHY B PLL"; + } + else { + pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 3V3"; + } + pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PLL_3V3_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PLL_3V3_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PLL_3V3_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PLL_3V3_LOW_ERR; + pAC->I2c.SenTable[i].SenReg = LM80_VT5_IN; + break; + case 7: + if (pAC->GIni.GIGenesis) { + pAC->I2c.SenTable[i].SenDesc = "Speed Fan"; + pAC->I2c.SenTable[i].SenType = SK_SEN_FAN; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_FAN_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_FAN_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_FAN_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_FAN_LOW_ERR; + pAC->I2c.SenTable[i].SenReg = LM80_FAN2_IN; + } + else { + pAC->I2c.SenTable[i].SenDesc = "Voltage PHY 2V5"; + pAC->I2c.SenTable[i].SenType = SK_SEN_VOLT; + pAC->I2c.SenTable[i].SenThreErrHigh = SK_SEN_PHY_2V5_HIGH_ERR; + pAC->I2c.SenTable[i].SenThreWarnHigh = SK_SEN_PHY_2V5_HIGH_WARN; + pAC->I2c.SenTable[i].SenThreWarnLow = SK_SEN_PHY_2V5_LOW_WARN; + pAC->I2c.SenTable[i].SenThreErrLow = SK_SEN_PHY_2V5_LOW_ERR; + pAC->I2c.SenTable[i].SenReg = LM80_VT6_IN; + } + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_INIT | SK_ERRCL_SW, + SKERR_I2C_E001, SKERR_I2C_E001MSG); + break; + } + + pAC->I2c.SenTable[i].SenValue = 0; + pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_OK; + pAC->I2c.SenTable[i].SenErrCts = 0; + pAC->I2c.SenTable[i].SenBegErrTS = 0; + pAC->I2c.SenTable[i].SenState = SK_SEN_IDLE; + pAC->I2c.SenTable[i].SenRead = SkLm80ReadSensor; + pAC->I2c.SenTable[i].SenDev = LM80_ADDR; + } + +#ifndef SK_DIAG + pAC->I2c.DummyReads = pAC->I2c.MaxSens; +#endif /* !SK_DIAG */ + + /* Clear I2C IRQ */ + SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ); + + /* Now we are I/O initialized */ + pAC->I2c.InitLevel = SK_INIT_IO; + return(0); +} /* SkI2cInit1 */ + + +/* + * Init level 2: Start first sensor read. + */ +static int SkI2cInit2( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC) /* I/O Context */ +{ + int ReadComplete; + SK_SENSOR *pSen; + + if (pAC->I2c.InitLevel != SK_INIT_IO) { + /* ReInit not needed in I2C module */ + /* Init0 and Init2 not permitted */ + return(0); + } + + pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens]; + ReadComplete = SkI2cReadSensor(pAC, IoC, pSen); + + if (ReadComplete) { + SK_ERR_LOG(pAC, SK_ERRCL_INIT, SKERR_I2C_E008, SKERR_I2C_E008MSG); + } + + /* Now we are correctly initialized */ + pAC->I2c.InitLevel = SK_INIT_RUN; + + return(0); +} /* SkI2cInit2*/ + + +/* + * Initialize I2C devices + * + * Get the first voltage value and discard it. + * Go into temperature read mode. A default pointer is not set. + * + * The things to be done depend on the init level in the parameter list: + * Level 0: + * Initialize only the data structures. Do NOT access hardware. + * Level 1: + * Initialize hardware through SK_IN / SK_OUT commands. Do NOT use interrupts. + * Level 2: + * Everything is possible. Interrupts may be used from now on. + * + * return: + * 0 = success + * other = error. + */ +int SkI2cInit( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context needed in levels 1 and 2 */ +int Level) /* Init Level */ +{ + + switch (Level) { + case SK_INIT_DATA: + return(SkI2cInit0(pAC)); + case SK_INIT_IO: + return(SkI2cInit1(pAC, IoC)); + case SK_INIT_RUN: + return(SkI2cInit2(pAC, IoC)); + default: + break; + } + + return(0); +} /* SkI2cInit */ + + +#ifndef SK_DIAG + +/* + * Interrupt service function for the I2C Interface + * + * Clears the Interrupt source + * + * Reads the register and check it for sending a trap. + * + * Starts the timer if necessary. + */ +void SkI2cIsr( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC) /* I/O Context */ +{ + SK_EVPARA Para; + + /* Clear I2C IRQ */ + SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ); + + Para.Para64 = 0; + SkEventQueue(pAC, SKGE_I2C, SK_I2CEV_IRQ, Para); +} /* SkI2cIsr */ + + +/* + * Check this sensors Value against the threshold and send events. + */ +static void SkI2cCheckSensor( +SK_AC *pAC, /* Adapter Context */ +SK_SENSOR *pSen) +{ + SK_EVPARA ParaLocal; + SK_BOOL TooHigh; /* Is sensor too high? */ + SK_BOOL TooLow; /* Is sensor too low? */ + SK_U64 CurrTime; /* Current Time */ + SK_BOOL DoTrapSend; /* We need to send a trap */ + SK_BOOL DoErrLog; /* We need to log the error */ + SK_BOOL IsError; /* We need to log the error */ + + /* Check Dummy Reads first */ + if (pAC->I2c.DummyReads > 0) { + pAC->I2c.DummyReads--; + return; + } + + /* Get the current time */ + CurrTime = SkOsGetTime(pAC); + + /* Set para to the most useful setting: The current sensor. */ + ParaLocal.Para64 = (SK_U64)pAC->I2c.CurrSens; + + /* Check the Value against the thresholds. First: Error Thresholds */ + TooHigh = (pSen->SenValue > pSen->SenThreErrHigh); + TooLow = (pSen->SenValue < pSen->SenThreErrLow); + + IsError = SK_FALSE; + if (TooHigh || TooLow) { + /* Error condition is satisfied */ + DoTrapSend = SK_TRUE; + DoErrLog = SK_TRUE; + + /* Now error condition is satisfied */ + IsError = SK_TRUE; + + if (pSen->SenErrFlag == SK_SEN_ERR_ERR) { + /* This state is the former one */ + + /* So check first whether we have to send a trap */ + if (pSen->SenLastErrTrapTS + SK_SEN_ERR_TR_HOLD > + CurrTime) { + /* + * Do NOT send the Trap. The hold back time + * has to run out first. + */ + DoTrapSend = SK_FALSE; + } + + /* Check now whether we have to log an Error */ + if (pSen->SenLastErrLogTS + SK_SEN_ERR_LOG_HOLD > + CurrTime) { + /* + * Do NOT log the error. The hold back time + * has to run out first. + */ + DoErrLog = SK_FALSE; + } + } + else { + /* We came from a different state -> Set Begin Time Stamp */ + pSen->SenBegErrTS = CurrTime; + pSen->SenErrFlag = SK_SEN_ERR_ERR; + } + + if (DoTrapSend) { + /* Set current Time */ + pSen->SenLastErrTrapTS = CurrTime; + pSen->SenErrCts++; + + /* Queue PNMI Event */ + SkEventQueue(pAC, SKGE_PNMI, (TooHigh ? + SK_PNMI_EVT_SEN_ERR_UPP : + SK_PNMI_EVT_SEN_ERR_LOW), + ParaLocal); + } + + if (DoErrLog) { + /* Set current Time */ + pSen->SenLastErrLogTS = CurrTime; + + if (pSen->SenType == SK_SEN_TEMP) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E011, SKERR_I2C_E011MSG); + } + else if (pSen->SenType == SK_SEN_VOLT) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E012, SKERR_I2C_E012MSG); + } + else { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E015, SKERR_I2C_E015MSG); + } + } + } + + /* Check the Value against the thresholds */ + /* 2nd: Warning thresholds */ + TooHigh = (pSen->SenValue > pSen->SenThreWarnHigh); + TooLow = (pSen->SenValue < pSen->SenThreWarnLow); + + if (!IsError && (TooHigh || TooLow)) { + /* Error condition is satisfied */ + DoTrapSend = SK_TRUE; + DoErrLog = SK_TRUE; + + if (pSen->SenErrFlag == SK_SEN_ERR_WARN) { + /* This state is the former one */ + + /* So check first whether we have to send a trap */ + if (pSen->SenLastWarnTrapTS + SK_SEN_WARN_TR_HOLD > CurrTime) { + /* + * Do NOT send the Trap. The hold back time + * has to run out first. + */ + DoTrapSend = SK_FALSE; + } + + /* Check now whether we have to log an Error */ + if (pSen->SenLastWarnLogTS + SK_SEN_WARN_LOG_HOLD > CurrTime) { + /* + * Do NOT log the error. The hold back time + * has to run out first. + */ + DoErrLog = SK_FALSE; + } + } + else { + /* We came from a different state -> Set Begin Time Stamp */ + pSen->SenBegWarnTS = CurrTime; + pSen->SenErrFlag = SK_SEN_ERR_WARN; + } + + if (DoTrapSend) { + /* Set current Time */ + pSen->SenLastWarnTrapTS = CurrTime; + pSen->SenWarnCts++; + + /* Queue PNMI Event */ + SkEventQueue(pAC, SKGE_PNMI, (TooHigh ? + SK_PNMI_EVT_SEN_WAR_UPP : + SK_PNMI_EVT_SEN_WAR_LOW), + ParaLocal); + } + + if (DoErrLog) { + /* Set current Time */ + pSen->SenLastWarnLogTS = CurrTime; + + if (pSen->SenType == SK_SEN_TEMP) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E009, SKERR_I2C_E009MSG); + } + else if (pSen->SenType == SK_SEN_VOLT) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E010, SKERR_I2C_E010MSG); + } + else { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E014, SKERR_I2C_E014MSG); + } + } + } + + /* Check for NO error at all */ + if (!IsError && !TooHigh && !TooLow) { + /* Set o.k. Status if no error and no warning condition */ + pSen->SenErrFlag = SK_SEN_ERR_OK; + } + + /* End of check against the thresholds */ + + /* Bug fix AF: 16.Aug.2001: Correct the init base + * of LM80 sensor. + */ + if (pSen->SenInit == SK_SEN_DYN_INIT_PCI_IO) { + + pSen->SenInit = SK_SEN_DYN_INIT_NONE; + + if (pSen->SenValue > SK_SEN_PCI_IO_RANGE_LIMITER) { + /* 5V PCI-IO Voltage */ + pSen->SenThreWarnLow = SK_SEN_PCI_IO_5V_LOW_WARN; + pSen->SenThreErrLow = SK_SEN_PCI_IO_5V_LOW_ERR; + } + else { + /* 3.3V PCI-IO Voltage */ + pSen->SenThreWarnHigh = SK_SEN_PCI_IO_3V3_HIGH_WARN; + pSen->SenThreErrHigh = SK_SEN_PCI_IO_3V3_HIGH_ERR; + } + } + +#ifdef TEST_ONLY + /* Dynamic thresholds also for VAUX of LM80 sensor */ + if (pSen->SenInit == SK_SEN_DYN_INIT_VAUX) { + + pSen->SenInit = SK_SEN_DYN_INIT_NONE; + + /* 3.3V VAUX Voltage */ + if (pSen->SenValue > SK_SEN_VAUX_RANGE_LIMITER) { + pSen->SenThreWarnLow = SK_SEN_VAUX_3V3_LOW_WARN; + pSen->SenThreErrLow = SK_SEN_VAUX_3V3_LOW_ERR; + } + /* 0V VAUX Voltage */ + else { + pSen->SenThreWarnHigh = SK_SEN_VAUX_0V_WARN_ERR; + pSen->SenThreErrHigh = SK_SEN_VAUX_0V_WARN_ERR; + } + } + + /* + * Check initialization state: + * The VIO Thresholds need adaption + */ + if (!pSen->SenInit && pSen->SenReg == LM80_VT1_IN && + pSen->SenValue > SK_SEN_WARNLOW2C && + pSen->SenValue < SK_SEN_WARNHIGH2) { + pSen->SenThreErrLow = SK_SEN_ERRLOW2C; + pSen->SenThreWarnLow = SK_SEN_WARNLOW2C; + pSen->SenInit = SK_TRUE; + } + + if (!pSen->SenInit && pSen->SenReg == LM80_VT1_IN && + pSen->SenValue > SK_SEN_WARNLOW2 && + pSen->SenValue < SK_SEN_WARNHIGH2C) { + pSen->SenThreErrHigh = SK_SEN_ERRHIGH2C; + pSen->SenThreWarnHigh = SK_SEN_WARNHIGH2C; + pSen->SenInit = SK_TRUE; + } +#endif + + if (pSen->SenInit != SK_SEN_DYN_INIT_NONE) { + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_I2C_E013, SKERR_I2C_E013MSG); + } +} /* SkI2cCheckSensor */ + + +/* + * The only Event to be served is the timeout event + * + */ +int SkI2cEvent( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Event, /* Module specific Event */ +SK_EVPARA Para) /* Event specific Parameter */ +{ + int ReadComplete; + SK_SENSOR *pSen; + SK_U32 Time; + SK_EVPARA ParaLocal; + int i; + + /* New case: no sensors */ + if (pAC->I2c.MaxSens == 0) { + return(0); + } + + switch (Event) { + case SK_I2CEV_IRQ: + pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens]; + ReadComplete = SkI2cReadSensor(pAC, IoC, pSen); + + if (ReadComplete) { + /* Check sensor against defined thresholds */ + SkI2cCheckSensor(pAC, pSen); + + /* Increment Current sensor and set appropriate Timeout */ + pAC->I2c.CurrSens++; + if (pAC->I2c.CurrSens >= pAC->I2c.MaxSens) { + pAC->I2c.CurrSens = 0; + Time = SK_I2C_TIM_LONG; + } + else { + Time = SK_I2C_TIM_SHORT; + } + + /* Start Timer */ + ParaLocal.Para64 = (SK_U64)0; + + pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING; + + SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time, + SKGE_I2C, SK_I2CEV_TIM, ParaLocal); + } + else { + /* Start Timer */ + ParaLocal.Para64 = (SK_U64)0; + + pAC->I2c.TimerMode = SK_TIMER_WATCH_SM; + + SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, SK_I2C_TIM_WATCH, + SKGE_I2C, SK_I2CEV_TIM, ParaLocal); + } + break; + case SK_I2CEV_TIM: + if (pAC->I2c.TimerMode == SK_TIMER_NEW_GAUGING) { + + ParaLocal.Para64 = (SK_U64)0; + SkTimerStop(pAC, IoC, &pAC->I2c.SenTimer); + + pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens]; + ReadComplete = SkI2cReadSensor(pAC, IoC, pSen); + + if (ReadComplete) { + /* Check sensor against defined thresholds */ + SkI2cCheckSensor(pAC, pSen); + + /* Increment Current sensor and set appropriate Timeout */ + pAC->I2c.CurrSens++; + if (pAC->I2c.CurrSens == pAC->I2c.MaxSens) { + pAC->I2c.CurrSens = 0; + Time = SK_I2C_TIM_LONG; + } + else { + Time = SK_I2C_TIM_SHORT; + } + + /* Start Timer */ + ParaLocal.Para64 = (SK_U64)0; + + pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING; + + SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time, + SKGE_I2C, SK_I2CEV_TIM, ParaLocal); + } + } + else { + pSen = &pAC->I2c.SenTable[pAC->I2c.CurrSens]; + pSen->SenErrFlag = SK_SEN_ERR_FAULTY; + SK_I2C_STOP(IoC); + + /* Increment Current sensor and set appropriate Timeout */ + pAC->I2c.CurrSens++; + if (pAC->I2c.CurrSens == pAC->I2c.MaxSens) { + pAC->I2c.CurrSens = 0; + Time = SK_I2C_TIM_LONG; + } + else { + Time = SK_I2C_TIM_SHORT; + } + + /* Start Timer */ + ParaLocal.Para64 = (SK_U64)0; + + pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING; + + SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time, + SKGE_I2C, SK_I2CEV_TIM, ParaLocal); + } + break; + case SK_I2CEV_CLEAR: + for (i = 0; i < SK_MAX_SENSORS; i++) { + pAC->I2c.SenTable[i].SenErrFlag = SK_SEN_ERR_OK; + pAC->I2c.SenTable[i].SenErrCts = 0; + pAC->I2c.SenTable[i].SenWarnCts = 0; + pAC->I2c.SenTable[i].SenBegErrTS = 0; + pAC->I2c.SenTable[i].SenBegWarnTS = 0; + pAC->I2c.SenTable[i].SenLastErrTrapTS = (SK_U64)0; + pAC->I2c.SenTable[i].SenLastErrLogTS = (SK_U64)0; + pAC->I2c.SenTable[i].SenLastWarnTrapTS = (SK_U64)0; + pAC->I2c.SenTable[i].SenLastWarnLogTS = (SK_U64)0; + } + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E006, SKERR_I2C_E006MSG); + } + + return(0); +} /* SkI2cEvent*/ + +#endif /* !SK_DIAG */ diff --git a/drivers/net/sk98lin/sklm80.c b/drivers/net/sk98lin/sklm80.c new file mode 100644 index 00000000000..a204f5bb55d --- /dev/null +++ b/drivers/net/sk98lin/sklm80.c @@ -0,0 +1,141 @@ +/****************************************************************************** + * + * Name: sklm80.c + * Project: Gigabit Ethernet Adapters, TWSI-Module + * Version: $Revision: 1.22 $ + * Date: $Date: 2003/10/20 09:08:21 $ + * Purpose: Functions to access Voltage and Temperature Sensor (LM80) + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + LM80 functions +*/ +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: sklm80.c,v 1.22 2003/10/20 09:08:21 rschmidt Exp $ (C) Marvell. "; +#endif + +#include "h/skdrv1st.h" /* Driver Specific Definitions */ +#include "h/lm80.h" +#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */ + +#define BREAK_OR_WAIT(pAC,IoC,Event) break + +/* + * read a sensors value (LM80 specific) + * + * This function reads a sensors value from the I2C sensor chip LM80. + * The sensor is defined by its index into the sensors database in the struct + * pAC points to. + * + * Returns 1 if the read is completed + * 0 if the read must be continued (I2C Bus still allocated) + */ +int SkLm80ReadSensor( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context needed in level 1 and 2 */ +SK_SENSOR *pSen) /* Sensor to be read */ +{ + SK_I32 Value; + + switch (pSen->SenState) { + case SK_SEN_IDLE: + /* Send address to ADDR register */ + SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, pSen->SenReg, 0); + + pSen->SenState = SK_SEN_VALUE ; + BREAK_OR_WAIT(pAC, IoC, I2C_READ); + + case SK_SEN_VALUE: + /* Read value from data register */ + SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value)); + + Value &= 0xff; /* only least significant byte is valid */ + + /* Do NOT check the Value against the thresholds */ + /* Checking is done in the calling instance */ + + if (pSen->SenType == SK_SEN_VOLT) { + /* Voltage sensor */ + pSen->SenValue = Value * SK_LM80_VT_LSB; + pSen->SenState = SK_SEN_IDLE ; + return(1); + } + + if (pSen->SenType == SK_SEN_FAN) { + if (Value != 0 && Value != 0xff) { + /* Fan speed counter */ + pSen->SenValue = SK_LM80_FAN_FAKTOR/Value; + } + else { + /* Indicate Fan error */ + pSen->SenValue = 0; + } + pSen->SenState = SK_SEN_IDLE ; + return(1); + } + + /* First: correct the value: it might be negative */ + if ((Value & 0x80) != 0) { + /* Value is negative */ + Value = Value - 256; + } + + /* We have a temperature sensor and need to get the signed extension. + * For now we get the extension from the last reading, so in the normal + * case we won't see flickering temperatures. + */ + pSen->SenValue = (Value * SK_LM80_TEMP_LSB) + + (pSen->SenValue % SK_LM80_TEMP_LSB); + + /* Send address to ADDR register */ + SK_I2C_CTL(IoC, I2C_READ, pSen->SenDev, I2C_025K_DEV, LM80_TEMP_CTRL, 0); + + pSen->SenState = SK_SEN_VALEXT ; + BREAK_OR_WAIT(pAC, IoC, I2C_READ); + + case SK_SEN_VALEXT: + /* Read value from data register */ + SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value)); + Value &= LM80_TEMP_LSB_9; /* only bit 7 is valid */ + + /* cut the LSB bit */ + pSen->SenValue = ((pSen->SenValue / SK_LM80_TEMP_LSB) * + SK_LM80_TEMP_LSB); + + if (pSen->SenValue < 0) { + /* Value negative: The bit value must be subtracted */ + pSen->SenValue -= ((Value >> 7) * SK_LM80_TEMPEXT_LSB); + } + else { + /* Value positive: The bit value must be added */ + pSen->SenValue += ((Value >> 7) * SK_LM80_TEMPEXT_LSB); + } + + pSen->SenState = SK_SEN_IDLE ; + return(1); + + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E007, SKERR_I2C_E007MSG); + return(1); + } + + /* Not completed */ + return(0); +} + diff --git a/drivers/net/sk98lin/skqueue.c b/drivers/net/sk98lin/skqueue.c new file mode 100644 index 00000000000..0275b4f71d9 --- /dev/null +++ b/drivers/net/sk98lin/skqueue.c @@ -0,0 +1,179 @@ +/****************************************************************************** + * + * Name: skqueue.c + * Project: Gigabit Ethernet Adapters, Event Scheduler Module + * Version: $Revision: 1.20 $ + * Date: $Date: 2003/09/16 13:44:00 $ + * Purpose: Management of an event queue. + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + + +/* + * Event queue and dispatcher + */ +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: skqueue.c,v 1.20 2003/09/16 13:44:00 rschmidt Exp $ (C) Marvell."; +#endif + +#include "h/skdrv1st.h" /* Driver Specific Definitions */ +#include "h/skqueue.h" /* Queue Definitions */ +#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */ + +#ifdef __C2MAN__ +/* + Event queue management. + + General Description: + + */ +intro() +{} +#endif + +#define PRINTF(a,b,c) + +/* + * init event queue management + * + * Must be called during init level 0. + */ +void SkEventInit( +SK_AC *pAC, /* Adapter context */ +SK_IOC Ioc, /* IO context */ +int Level) /* Init level */ +{ + switch (Level) { + case SK_INIT_DATA: + pAC->Event.EvPut = pAC->Event.EvGet = pAC->Event.EvQueue; + break; + default: + break; + } +} + +/* + * add event to queue + */ +void SkEventQueue( +SK_AC *pAC, /* Adapters context */ +SK_U32 Class, /* Event Class */ +SK_U32 Event, /* Event to be queued */ +SK_EVPARA Para) /* Event parameter */ +{ + pAC->Event.EvPut->Class = Class; + pAC->Event.EvPut->Event = Event; + pAC->Event.EvPut->Para = Para; + + if (++pAC->Event.EvPut == &pAC->Event.EvQueue[SK_MAX_EVENT]) + pAC->Event.EvPut = pAC->Event.EvQueue; + + if (pAC->Event.EvPut == pAC->Event.EvGet) { + SK_ERR_LOG(pAC, SK_ERRCL_NORES, SKERR_Q_E001, SKERR_Q_E001MSG); + } +} + +/* + * event dispatcher + * while event queue is not empty + * get event from queue + * send command to state machine + * end + * return error reported by individual Event function + * 0 if no error occured. + */ +int SkEventDispatcher( +SK_AC *pAC, /* Adapters Context */ +SK_IOC Ioc) /* Io context */ +{ + SK_EVENTELEM *pEv; /* pointer into queue */ + SK_U32 Class; + int Rtv; + + pEv = pAC->Event.EvGet; + + PRINTF("dispatch get %x put %x\n", pEv, pAC->Event.ev_put); + + while (pEv != pAC->Event.EvPut) { + PRINTF("dispatch Class %d Event %d\n", pEv->Class, pEv->Event); + + switch (Class = pEv->Class) { +#ifndef SK_USE_LAC_EV +#ifndef SK_SLIM + case SKGE_RLMT: /* RLMT Event */ + Rtv = SkRlmtEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; + case SKGE_I2C: /* I2C Event */ + Rtv = SkI2cEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; + case SKGE_PNMI: /* PNMI Event */ + Rtv = SkPnmiEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; +#endif /* not SK_SLIM */ +#endif /* not SK_USE_LAC_EV */ + case SKGE_DRV: /* Driver Event */ + Rtv = SkDrvEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; +#ifndef SK_USE_SW_TIMER + case SKGE_HWAC: + Rtv = SkGeSirqEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; +#else /* !SK_USE_SW_TIMER */ + case SKGE_SWT : + Rtv = SkSwtEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; +#endif /* !SK_USE_SW_TIMER */ +#ifdef SK_USE_LAC_EV + case SKGE_LACP : + Rtv = SkLacpEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; + case SKGE_RSF : + Rtv = SkRsfEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; + case SKGE_MARKER : + Rtv = SkMarkerEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; + case SKGE_FD : + Rtv = SkFdEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; +#endif /* SK_USE_LAC_EV */ +#ifdef SK_USE_CSUM + case SKGE_CSUM : + Rtv = SkCsEvent(pAC, Ioc, pEv->Event, pEv->Para); + break; +#endif /* SK_USE_CSUM */ + default : + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_Q_E002, SKERR_Q_E002MSG); + Rtv = 0; + } + + if (Rtv != 0) { + return(Rtv); + } + + if (++pEv == &pAC->Event.EvQueue[SK_MAX_EVENT]) + pEv = pAC->Event.EvQueue; + + /* Renew get: it is used in queue_events to detect overruns */ + pAC->Event.EvGet = pEv; + } + + return(0); +} + +/* End of file */ diff --git a/drivers/net/sk98lin/skrlmt.c b/drivers/net/sk98lin/skrlmt.c new file mode 100644 index 00000000000..be8d1ccddf6 --- /dev/null +++ b/drivers/net/sk98lin/skrlmt.c @@ -0,0 +1,3257 @@ +/****************************************************************************** + * + * Name: skrlmt.c + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.69 $ + * Date: $Date: 2003/04/15 09:39:22 $ + * Purpose: Manage links on SK-NET Adapters, esp. redundant ones. + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This module contains code for Link ManagemenT (LMT) of SK-NET Adapters. + * It is mainly intended for adapters with more than one link. + * For such adapters, this module realizes Redundant Link ManagemenT (RLMT). + * + * Include File Hierarchy: + * + * "skdrv1st.h" + * "skdrv2nd.h" + * + ******************************************************************************/ + +#ifndef lint +static const char SysKonnectFileId[] = + "@(#) $Id: skrlmt.c,v 1.69 2003/04/15 09:39:22 tschilli Exp $ (C) Marvell."; +#endif /* !defined(lint) */ + +#define __SKRLMT_C + +#ifdef __cplusplus +extern "C" { +#endif /* cplusplus */ + +#include "h/skdrv1st.h" +#include "h/skdrv2nd.h" + +/* defines ********************************************************************/ + +#ifndef SK_HWAC_LINK_LED +#define SK_HWAC_LINK_LED(a,b,c,d) +#endif /* !defined(SK_HWAC_LINK_LED) */ + +#ifndef DEBUG +#define RLMT_STATIC static +#else /* DEBUG */ +#define RLMT_STATIC + +#ifndef SK_LITTLE_ENDIAN +/* First 32 bits */ +#define OFFS_LO32 1 + +/* Second 32 bits */ +#define OFFS_HI32 0 +#else /* SK_LITTLE_ENDIAN */ +/* First 32 bits */ +#define OFFS_LO32 0 + +/* Second 32 bits */ +#define OFFS_HI32 1 +#endif /* SK_LITTLE_ENDIAN */ + +#endif /* DEBUG */ + +/* ----- Private timeout values ----- */ + +#define SK_RLMT_MIN_TO_VAL 125000 /* 1/8 sec. */ +#define SK_RLMT_DEF_TO_VAL 1000000 /* 1 sec. */ +#define SK_RLMT_PORTDOWN_TIM_VAL 900000 /* another 0.9 sec. */ +#define SK_RLMT_PORTSTART_TIM_VAL 100000 /* 0.1 sec. */ +#define SK_RLMT_PORTUP_TIM_VAL 2500000 /* 2.5 sec. */ +#define SK_RLMT_SEG_TO_VAL 900000000 /* 15 min. */ + +/* Assume tick counter increment is 1 - may be set OS-dependent. */ +#ifndef SK_TICK_INCR +#define SK_TICK_INCR SK_CONSTU64(1) +#endif /* !defined(SK_TICK_INCR) */ + +/* + * Amount that a time stamp must be later to be recognized as "substantially + * later". This is about 1/128 sec, but above 1 tick counter increment. + */ +#define SK_RLMT_BC_DELTA (1 + ((SK_TICKS_PER_SEC >> 7) > SK_TICK_INCR ? \ + (SK_TICKS_PER_SEC >> 7) : SK_TICK_INCR)) + +/* ----- Private RLMT defaults ----- */ + +#define SK_RLMT_DEF_PREF_PORT 0 /* "Lower" port. */ +#define SK_RLMT_DEF_MODE SK_RLMT_CHECK_LINK /* Default RLMT Mode. */ + +/* ----- Private RLMT checking states ----- */ + +#define SK_RLMT_RCS_SEG 1 /* RLMT Check State: check seg. */ +#define SK_RLMT_RCS_START_SEG 2 /* RLMT Check State: start check seg. */ +#define SK_RLMT_RCS_SEND_SEG 4 /* RLMT Check State: send BPDU packet */ +#define SK_RLMT_RCS_REPORT_SEG 8 /* RLMT Check State: report seg. */ + +/* ----- Private PORT checking states ----- */ + +#define SK_RLMT_PCS_TX 1 /* Port Check State: check tx. */ +#define SK_RLMT_PCS_RX 2 /* Port Check State: check rx. */ + +/* ----- Private PORT events ----- */ + +/* Note: Update simulation when changing these. */ +#define SK_RLMT_PORTSTART_TIM 1100 /* Port start timeout. */ +#define SK_RLMT_PORTUP_TIM 1101 /* Port can now go up. */ +#define SK_RLMT_PORTDOWN_RX_TIM 1102 /* Port did not receive once ... */ +#define SK_RLMT_PORTDOWN 1103 /* Port went down. */ +#define SK_RLMT_PORTDOWN_TX_TIM 1104 /* Partner did not receive ... */ + +/* ----- Private RLMT events ----- */ + +/* Note: Update simulation when changing these. */ +#define SK_RLMT_TIM 2100 /* RLMT timeout. */ +#define SK_RLMT_SEG_TIM 2101 /* RLMT segmentation check timeout. */ + +#define TO_SHORTEN(tim) ((tim) / 2) + +/* Error numbers and messages. */ +#define SKERR_RLMT_E001 (SK_ERRBASE_RLMT + 0) +#define SKERR_RLMT_E001_MSG "No Packet." +#define SKERR_RLMT_E002 (SKERR_RLMT_E001 + 1) +#define SKERR_RLMT_E002_MSG "Short Packet." +#define SKERR_RLMT_E003 (SKERR_RLMT_E002 + 1) +#define SKERR_RLMT_E003_MSG "Unknown RLMT event." +#define SKERR_RLMT_E004 (SKERR_RLMT_E003 + 1) +#define SKERR_RLMT_E004_MSG "PortsUp incorrect." +#define SKERR_RLMT_E005 (SKERR_RLMT_E004 + 1) +#define SKERR_RLMT_E005_MSG \ + "Net seems to be segmented (different root bridges are reported on the ports)." +#define SKERR_RLMT_E006 (SKERR_RLMT_E005 + 1) +#define SKERR_RLMT_E006_MSG "Duplicate MAC Address detected." +#define SKERR_RLMT_E007 (SKERR_RLMT_E006 + 1) +#define SKERR_RLMT_E007_MSG "LinksUp incorrect." +#define SKERR_RLMT_E008 (SKERR_RLMT_E007 + 1) +#define SKERR_RLMT_E008_MSG "Port not started but link came up." +#define SKERR_RLMT_E009 (SKERR_RLMT_E008 + 1) +#define SKERR_RLMT_E009_MSG "Corrected illegal setting of Preferred Port." +#define SKERR_RLMT_E010 (SKERR_RLMT_E009 + 1) +#define SKERR_RLMT_E010_MSG "Ignored illegal Preferred Port." + +/* LLC field values. */ +#define LLC_COMMAND_RESPONSE_BIT 1 +#define LLC_TEST_COMMAND 0xE3 +#define LLC_UI 0x03 + +/* RLMT Packet fields. */ +#define SK_RLMT_DSAP 0 +#define SK_RLMT_SSAP 0 +#define SK_RLMT_CTRL (LLC_TEST_COMMAND) +#define SK_RLMT_INDICATOR0 0x53 /* S */ +#define SK_RLMT_INDICATOR1 0x4B /* K */ +#define SK_RLMT_INDICATOR2 0x2D /* - */ +#define SK_RLMT_INDICATOR3 0x52 /* R */ +#define SK_RLMT_INDICATOR4 0x4C /* L */ +#define SK_RLMT_INDICATOR5 0x4D /* M */ +#define SK_RLMT_INDICATOR6 0x54 /* T */ +#define SK_RLMT_PACKET_VERSION 0 + +/* RLMT SPT Flag values. */ +#define SK_RLMT_SPT_FLAG_CHANGE 0x01 +#define SK_RLMT_SPT_FLAG_CHANGE_ACK 0x80 + +/* RLMT SPT Packet fields. */ +#define SK_RLMT_SPT_DSAP 0x42 +#define SK_RLMT_SPT_SSAP 0x42 +#define SK_RLMT_SPT_CTRL (LLC_UI) +#define SK_RLMT_SPT_PROTOCOL_ID0 0x00 +#define SK_RLMT_SPT_PROTOCOL_ID1 0x00 +#define SK_RLMT_SPT_PROTOCOL_VERSION_ID 0x00 +#define SK_RLMT_SPT_BPDU_TYPE 0x00 +#define SK_RLMT_SPT_FLAGS 0x00 /* ?? */ +#define SK_RLMT_SPT_ROOT_ID0 0xFF /* Lowest possible priority. */ +#define SK_RLMT_SPT_ROOT_ID1 0xFF /* Lowest possible priority. */ + +/* Remaining 6 bytes will be the current port address. */ +#define SK_RLMT_SPT_ROOT_PATH_COST0 0x00 +#define SK_RLMT_SPT_ROOT_PATH_COST1 0x00 +#define SK_RLMT_SPT_ROOT_PATH_COST2 0x00 +#define SK_RLMT_SPT_ROOT_PATH_COST3 0x00 +#define SK_RLMT_SPT_BRIDGE_ID0 0xFF /* Lowest possible priority. */ +#define SK_RLMT_SPT_BRIDGE_ID1 0xFF /* Lowest possible priority. */ + +/* Remaining 6 bytes will be the current port address. */ +#define SK_RLMT_SPT_PORT_ID0 0xFF /* Lowest possible priority. */ +#define SK_RLMT_SPT_PORT_ID1 0xFF /* Lowest possible priority. */ +#define SK_RLMT_SPT_MSG_AGE0 0x00 +#define SK_RLMT_SPT_MSG_AGE1 0x00 +#define SK_RLMT_SPT_MAX_AGE0 0x00 +#define SK_RLMT_SPT_MAX_AGE1 0xFF +#define SK_RLMT_SPT_HELLO_TIME0 0x00 +#define SK_RLMT_SPT_HELLO_TIME1 0xFF +#define SK_RLMT_SPT_FWD_DELAY0 0x00 +#define SK_RLMT_SPT_FWD_DELAY1 0x40 + +/* Size defines. */ +#define SK_RLMT_MIN_PACKET_SIZE 34 +#define SK_RLMT_MAX_PACKET_SIZE (SK_RLMT_MAX_TX_BUF_SIZE) +#define SK_PACKET_DATA_LEN (SK_RLMT_MAX_PACKET_SIZE - \ + SK_RLMT_MIN_PACKET_SIZE) + +/* ----- RLMT packet types ----- */ +#define SK_PACKET_ANNOUNCE 1 /* Port announcement. */ +#define SK_PACKET_ALIVE 2 /* Alive packet to port. */ +#define SK_PACKET_ADDR_CHANGED 3 /* Port address changed. */ +#define SK_PACKET_CHECK_TX 4 /* Check your tx line. */ + +#ifdef SK_LITTLE_ENDIAN +#define SK_U16_TO_NETWORK_ORDER(Val,Addr) { \ + SK_U8 *_Addr = (SK_U8*)(Addr); \ + SK_U16 _Val = (SK_U16)(Val); \ + *_Addr++ = (SK_U8)(_Val >> 8); \ + *_Addr = (SK_U8)(_Val & 0xFF); \ +} +#endif /* SK_LITTLE_ENDIAN */ + +#ifdef SK_BIG_ENDIAN +#define SK_U16_TO_NETWORK_ORDER(Val,Addr) (*(SK_U16*)(Addr) = (SK_U16)(Val)) +#endif /* SK_BIG_ENDIAN */ + +#define AUTONEG_FAILED SK_FALSE +#define AUTONEG_SUCCESS SK_TRUE + + +/* typedefs *******************************************************************/ + +/* RLMT packet. Length: SK_RLMT_MAX_PACKET_SIZE (60) bytes. */ +typedef struct s_RlmtPacket { + SK_U8 DstAddr[SK_MAC_ADDR_LEN]; + SK_U8 SrcAddr[SK_MAC_ADDR_LEN]; + SK_U8 TypeLen[2]; + SK_U8 DSap; + SK_U8 SSap; + SK_U8 Ctrl; + SK_U8 Indicator[7]; + SK_U8 RlmtPacketType[2]; + SK_U8 Align1[2]; + SK_U8 Random[4]; /* Random value of requesting(!) station. */ + SK_U8 RlmtPacketVersion[2]; /* RLMT Packet version. */ + SK_U8 Data[SK_PACKET_DATA_LEN]; +} SK_RLMT_PACKET; + +typedef struct s_SpTreeRlmtPacket { + SK_U8 DstAddr[SK_MAC_ADDR_LEN]; + SK_U8 SrcAddr[SK_MAC_ADDR_LEN]; + SK_U8 TypeLen[2]; + SK_U8 DSap; + SK_U8 SSap; + SK_U8 Ctrl; + SK_U8 ProtocolId[2]; + SK_U8 ProtocolVersionId; + SK_U8 BpduType; + SK_U8 Flags; + SK_U8 RootId[8]; + SK_U8 RootPathCost[4]; + SK_U8 BridgeId[8]; + SK_U8 PortId[2]; + SK_U8 MessageAge[2]; + SK_U8 MaxAge[2]; + SK_U8 HelloTime[2]; + SK_U8 ForwardDelay[2]; +} SK_SPTREE_PACKET; + +/* global variables ***********************************************************/ + +SK_MAC_ADDR SkRlmtMcAddr = {{0x01, 0x00, 0x5A, 0x52, 0x4C, 0x4D}}; +SK_MAC_ADDR BridgeMcAddr = {{0x01, 0x80, 0xC2, 0x00, 0x00, 0x00}}; + +/* local variables ************************************************************/ + +/* None. */ + +/* functions ******************************************************************/ + +RLMT_STATIC void SkRlmtCheckSwitch( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 NetIdx); +RLMT_STATIC void SkRlmtCheckSeg( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 NetIdx); +RLMT_STATIC void SkRlmtEvtSetNets( + SK_AC *pAC, + SK_IOC IoC, + SK_EVPARA Para); + +/****************************************************************************** + * + * SkRlmtInit - initialize data, set state to init + * + * Description: + * + * SK_INIT_DATA + * ============ + * + * This routine initializes all RLMT-related variables to a known state. + * The initial state is SK_RLMT_RS_INIT. + * All ports are initialized to SK_RLMT_PS_INIT. + * + * + * SK_INIT_IO + * ========== + * + * Nothing. + * + * + * SK_INIT_RUN + * =========== + * + * Determine the adapter's random value. + * Set the hw registers, the "logical MAC address", the + * RLMT multicast address, and eventually the BPDU multicast address. + * + * Context: + * init, pageable + * + * Returns: + * Nothing. + */ +void SkRlmtInit( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Level) /* Initialization Level */ +{ + SK_U32 i, j; + SK_U64 Random; + SK_EVPARA Para; + SK_MAC_ADDR VirtualMacAddress; + SK_MAC_ADDR PhysicalAMacAddress; + SK_BOOL VirtualMacAddressSet; + SK_BOOL PhysicalAMacAddressSet; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_INIT, + ("RLMT Init level %d.\n", Level)) + + switch (Level) { + case SK_INIT_DATA: /* Initialize data structures. */ + SK_MEMSET((char *)&pAC->Rlmt, 0, sizeof(SK_RLMT)); + + for (i = 0; i < SK_MAX_MACS; i++) { + pAC->Rlmt.Port[i].PortState = SK_RLMT_PS_INIT; + pAC->Rlmt.Port[i].LinkDown = SK_TRUE; + pAC->Rlmt.Port[i].PortDown = SK_TRUE; + pAC->Rlmt.Port[i].PortStarted = SK_FALSE; + pAC->Rlmt.Port[i].PortNoRx = SK_FALSE; + pAC->Rlmt.Port[i].RootIdSet = SK_FALSE; + pAC->Rlmt.Port[i].PortNumber = i; + pAC->Rlmt.Port[i].Net = &pAC->Rlmt.Net[0]; + pAC->Rlmt.Port[i].AddrPort = &pAC->Addr.Port[i]; + } + + pAC->Rlmt.NumNets = 1; + for (i = 0; i < SK_MAX_NETS; i++) { + pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT; + pAC->Rlmt.Net[i].RootIdSet = SK_FALSE; + pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT; + pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF; /* Automatic. */ + /* Just assuming. */ + pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort; + pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE; + pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL; + pAC->Rlmt.Net[i].NetNumber = i; + } + + pAC->Rlmt.Net[0].Port[0] = &pAC->Rlmt.Port[0]; + pAC->Rlmt.Net[0].Port[1] = &pAC->Rlmt.Port[1]; +#if SK_MAX_NETS > 1 + pAC->Rlmt.Net[1].Port[0] = &pAC->Rlmt.Port[1]; +#endif /* SK_MAX_NETS > 1 */ + break; + + case SK_INIT_IO: /* GIMacsFound first available here. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_INIT, + ("RLMT: %d MACs were detected.\n", pAC->GIni.GIMacsFound)) + + pAC->Rlmt.Net[0].NumPorts = pAC->GIni.GIMacsFound; + + /* Initialize HW registers? */ + if (pAC->GIni.GIMacsFound == 1) { + Para.Para32[0] = SK_RLMT_MODE_CLS; + Para.Para32[1] = 0; + (void)SkRlmtEvent(pAC, IoC, SK_RLMT_MODE_CHANGE, Para); + } + break; + + case SK_INIT_RUN: + /* Ensure RLMT is set to one net. */ + if (pAC->Rlmt.NumNets > 1) { + Para.Para32[0] = 1; + Para.Para32[1] = -1; + SkRlmtEvtSetNets(pAC, IoC, Para); + } + + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + Random = SkOsGetTime(pAC); + *(SK_U32*)&pAC->Rlmt.Port[i].Random = *(SK_U32*)&Random; + + for (j = 0; j < 4; j++) { + pAC->Rlmt.Port[i].Random[j] ^= pAC->Rlmt.Port[i].AddrPort-> + CurrentMacAddress.a[SK_MAC_ADDR_LEN - 1 - j]; + } + + (void)SkAddrMcClear(pAC, IoC, i, SK_ADDR_PERMANENT | SK_MC_SW_ONLY); + + /* Add RLMT MC address. */ + (void)SkAddrMcAdd(pAC, IoC, i, &SkRlmtMcAddr, SK_ADDR_PERMANENT); + + if (pAC->Rlmt.Net[0].RlmtMode & SK_RLMT_CHECK_SEG) { + /* Add BPDU MC address. */ + (void)SkAddrMcAdd(pAC, IoC, i, &BridgeMcAddr, SK_ADDR_PERMANENT); + } + + (void)SkAddrMcUpdate(pAC, IoC, i); + } + + VirtualMacAddressSet = SK_FALSE; + /* Read virtual MAC address from Control Register File. */ + for (j = 0; j < SK_MAC_ADDR_LEN; j++) { + + SK_IN8(IoC, B2_MAC_1 + j, &VirtualMacAddress.a[j]); + VirtualMacAddressSet |= VirtualMacAddress.a[j]; + } + + PhysicalAMacAddressSet = SK_FALSE; + /* Read physical MAC address for MAC A from Control Register File. */ + for (j = 0; j < SK_MAC_ADDR_LEN; j++) { + + SK_IN8(IoC, B2_MAC_2 + j, &PhysicalAMacAddress.a[j]); + PhysicalAMacAddressSet |= PhysicalAMacAddress.a[j]; + } + + /* check if the two mac addresses contain reasonable values */ + if (!VirtualMacAddressSet || !PhysicalAMacAddressSet) { + + pAC->Rlmt.RlmtOff = SK_TRUE; + } + + /* if the two mac addresses are equal switch off the RLMT_PRE_LOOKAHEAD + and the RLMT_LOOKAHEAD macros */ + else if (SK_ADDR_EQUAL(PhysicalAMacAddress.a, VirtualMacAddress.a)) { + + pAC->Rlmt.RlmtOff = SK_TRUE; + } + else { + pAC->Rlmt.RlmtOff = SK_FALSE; + } + break; + + default: /* error */ + break; + } + return; +} /* SkRlmtInit */ + + +/****************************************************************************** + * + * SkRlmtBuildCheckChain - build the check chain + * + * Description: + * This routine builds the local check chain: + * - Each port that is up checks the next port. + * - The last port that is up checks the first port that is up. + * + * Notes: + * - Currently only local ports are considered when building the chain. + * - Currently the SuspectState is just reset; + * it would be better to save it ... + * + * Context: + * runtime, pageable? + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtBuildCheckChain( +SK_AC *pAC, /* Adapter Context */ +SK_U32 NetIdx) /* Net Number */ +{ + SK_U32 i; + SK_U32 NumMacsUp; + SK_RLMT_PORT * FirstMacUp; + SK_RLMT_PORT * PrevMacUp; + + FirstMacUp = NULL; + PrevMacUp = NULL; + + if (!(pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_CHECK_LOC_LINK)) { + for (i = 0; i < pAC->Rlmt.Net[i].NumPorts; i++) { + pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked = 0; + } + return; /* Done. */ + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SkRlmtBuildCheckChain.\n")) + + NumMacsUp = 0; + + for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) { + pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked = 0; + pAC->Rlmt.Net[NetIdx].Port[i]->PortsSuspect = 0; + pAC->Rlmt.Net[NetIdx].Port[i]->CheckingState &= + ~(SK_RLMT_PCS_RX | SK_RLMT_PCS_TX); + + /* + * If more than two links are detected we should consider + * checking at least two other ports: + * 1. the next port that is not LinkDown and + * 2. the next port that is not PortDown. + */ + if (!pAC->Rlmt.Net[NetIdx].Port[i]->LinkDown) { + if (NumMacsUp == 0) { + FirstMacUp = pAC->Rlmt.Net[NetIdx].Port[i]; + } + else { + PrevMacUp->PortCheck[ + pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked].CheckAddr = + pAC->Rlmt.Net[NetIdx].Port[i]->AddrPort->CurrentMacAddress; + PrevMacUp->PortCheck[ + PrevMacUp->PortsChecked].SuspectTx = SK_FALSE; + PrevMacUp->PortsChecked++; + } + PrevMacUp = pAC->Rlmt.Net[NetIdx].Port[i]; + NumMacsUp++; + } + } + + if (NumMacsUp > 1) { + PrevMacUp->PortCheck[PrevMacUp->PortsChecked].CheckAddr = + FirstMacUp->AddrPort->CurrentMacAddress; + PrevMacUp->PortCheck[PrevMacUp->PortsChecked].SuspectTx = + SK_FALSE; + PrevMacUp->PortsChecked++; + } + +#ifdef DEBUG + for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Port %d checks %d other ports: %2X.\n", i, + pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked, + pAC->Rlmt.Net[NetIdx].Port[i]->PortCheck[0].CheckAddr.a[5])) + } +#endif /* DEBUG */ + + return; +} /* SkRlmtBuildCheckChain */ + + +/****************************************************************************** + * + * SkRlmtBuildPacket - build an RLMT packet + * + * Description: + * This routine sets up an RLMT packet. + * + * Context: + * runtime, pageable? + * + * Returns: + * NULL or pointer to RLMT mbuf + */ +RLMT_STATIC SK_MBUF *SkRlmtBuildPacket( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 PortNumber, /* Sending port */ +SK_U16 PacketType, /* RLMT packet type */ +SK_MAC_ADDR *SrcAddr, /* Source address */ +SK_MAC_ADDR *DestAddr) /* Destination address */ +{ + int i; + SK_U16 Length; + SK_MBUF *pMb; + SK_RLMT_PACKET *pPacket; + +#ifdef DEBUG + SK_U8 CheckSrc = 0; + SK_U8 CheckDest = 0; + + for (i = 0; i < SK_MAC_ADDR_LEN; ++i) { + CheckSrc |= SrcAddr->a[i]; + CheckDest |= DestAddr->a[i]; + } + + if ((CheckSrc == 0) || (CheckDest == 0)) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_ERR, + ("SkRlmtBuildPacket: Invalid %s%saddr.\n", + (CheckSrc == 0 ? "Src" : ""), (CheckDest == 0 ? "Dest" : ""))) + } +#endif + + if ((pMb = SkDrvAllocRlmtMbuf(pAC, IoC, SK_RLMT_MAX_PACKET_SIZE)) != NULL) { + pPacket = (SK_RLMT_PACKET*)pMb->pData; + for (i = 0; i < SK_MAC_ADDR_LEN; i++) { + pPacket->DstAddr[i] = DestAddr->a[i]; + pPacket->SrcAddr[i] = SrcAddr->a[i]; + } + pPacket->DSap = SK_RLMT_DSAP; + pPacket->SSap = SK_RLMT_SSAP; + pPacket->Ctrl = SK_RLMT_CTRL; + pPacket->Indicator[0] = SK_RLMT_INDICATOR0; + pPacket->Indicator[1] = SK_RLMT_INDICATOR1; + pPacket->Indicator[2] = SK_RLMT_INDICATOR2; + pPacket->Indicator[3] = SK_RLMT_INDICATOR3; + pPacket->Indicator[4] = SK_RLMT_INDICATOR4; + pPacket->Indicator[5] = SK_RLMT_INDICATOR5; + pPacket->Indicator[6] = SK_RLMT_INDICATOR6; + + SK_U16_TO_NETWORK_ORDER(PacketType, &pPacket->RlmtPacketType[0]); + + for (i = 0; i < 4; i++) { + pPacket->Random[i] = pAC->Rlmt.Port[PortNumber].Random[i]; + } + + SK_U16_TO_NETWORK_ORDER( + SK_RLMT_PACKET_VERSION, &pPacket->RlmtPacketVersion[0]); + + for (i = 0; i < SK_PACKET_DATA_LEN; i++) { + pPacket->Data[i] = 0x00; + } + + Length = SK_RLMT_MAX_PACKET_SIZE; /* Or smaller. */ + pMb->Length = Length; + pMb->PortIdx = PortNumber; + Length -= 14; + SK_U16_TO_NETWORK_ORDER(Length, &pPacket->TypeLen[0]); + + if (PacketType == SK_PACKET_ALIVE) { + pAC->Rlmt.Port[PortNumber].TxHelloCts++; + } + } + + return (pMb); +} /* SkRlmtBuildPacket */ + + +/****************************************************************************** + * + * SkRlmtBuildSpanningTreePacket - build spanning tree check packet + * + * Description: + * This routine sets up a BPDU packet for spanning tree check. + * + * Context: + * runtime, pageable? + * + * Returns: + * NULL or pointer to RLMT mbuf + */ +RLMT_STATIC SK_MBUF *SkRlmtBuildSpanningTreePacket( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 PortNumber) /* Sending port */ +{ + unsigned i; + SK_U16 Length; + SK_MBUF *pMb; + SK_SPTREE_PACKET *pSPacket; + + if ((pMb = SkDrvAllocRlmtMbuf(pAC, IoC, SK_RLMT_MAX_PACKET_SIZE)) != + NULL) { + pSPacket = (SK_SPTREE_PACKET*)pMb->pData; + for (i = 0; i < SK_MAC_ADDR_LEN; i++) { + pSPacket->DstAddr[i] = BridgeMcAddr.a[i]; + pSPacket->SrcAddr[i] = + pAC->Addr.Port[PortNumber].CurrentMacAddress.a[i]; + } + pSPacket->DSap = SK_RLMT_SPT_DSAP; + pSPacket->SSap = SK_RLMT_SPT_SSAP; + pSPacket->Ctrl = SK_RLMT_SPT_CTRL; + + pSPacket->ProtocolId[0] = SK_RLMT_SPT_PROTOCOL_ID0; + pSPacket->ProtocolId[1] = SK_RLMT_SPT_PROTOCOL_ID1; + pSPacket->ProtocolVersionId = SK_RLMT_SPT_PROTOCOL_VERSION_ID; + pSPacket->BpduType = SK_RLMT_SPT_BPDU_TYPE; + pSPacket->Flags = SK_RLMT_SPT_FLAGS; + pSPacket->RootId[0] = SK_RLMT_SPT_ROOT_ID0; + pSPacket->RootId[1] = SK_RLMT_SPT_ROOT_ID1; + pSPacket->RootPathCost[0] = SK_RLMT_SPT_ROOT_PATH_COST0; + pSPacket->RootPathCost[1] = SK_RLMT_SPT_ROOT_PATH_COST1; + pSPacket->RootPathCost[2] = SK_RLMT_SPT_ROOT_PATH_COST2; + pSPacket->RootPathCost[3] = SK_RLMT_SPT_ROOT_PATH_COST3; + pSPacket->BridgeId[0] = SK_RLMT_SPT_BRIDGE_ID0; + pSPacket->BridgeId[1] = SK_RLMT_SPT_BRIDGE_ID1; + + /* + * Use logical MAC address as bridge ID and filter these packets + * on receive. + */ + for (i = 0; i < SK_MAC_ADDR_LEN; i++) { + pSPacket->BridgeId[i + 2] = pSPacket->RootId[i + 2] = + pAC->Addr.Net[pAC->Rlmt.Port[PortNumber].Net->NetNumber]. + CurrentMacAddress.a[i]; + } + pSPacket->PortId[0] = SK_RLMT_SPT_PORT_ID0; + pSPacket->PortId[1] = SK_RLMT_SPT_PORT_ID1; + pSPacket->MessageAge[0] = SK_RLMT_SPT_MSG_AGE0; + pSPacket->MessageAge[1] = SK_RLMT_SPT_MSG_AGE1; + pSPacket->MaxAge[0] = SK_RLMT_SPT_MAX_AGE0; + pSPacket->MaxAge[1] = SK_RLMT_SPT_MAX_AGE1; + pSPacket->HelloTime[0] = SK_RLMT_SPT_HELLO_TIME0; + pSPacket->HelloTime[1] = SK_RLMT_SPT_HELLO_TIME1; + pSPacket->ForwardDelay[0] = SK_RLMT_SPT_FWD_DELAY0; + pSPacket->ForwardDelay[1] = SK_RLMT_SPT_FWD_DELAY1; + + Length = SK_RLMT_MAX_PACKET_SIZE; /* Or smaller. */ + pMb->Length = Length; + pMb->PortIdx = PortNumber; + Length -= 14; + SK_U16_TO_NETWORK_ORDER(Length, &pSPacket->TypeLen[0]); + + pAC->Rlmt.Port[PortNumber].TxSpHelloReqCts++; + } + + return (pMb); +} /* SkRlmtBuildSpanningTreePacket */ + + +/****************************************************************************** + * + * SkRlmtSend - build and send check packets + * + * Description: + * Depending on the RLMT state and the checking state, several packets + * are sent through the indicated port. + * + * Context: + * runtime, pageable? + * + * Returns: + * Nothing. + */ +RLMT_STATIC void SkRlmtSend( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 PortNumber) /* Sending port */ +{ + unsigned j; + SK_EVPARA Para; + SK_RLMT_PORT *pRPort; + + pRPort = &pAC->Rlmt.Port[PortNumber]; + if (pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) { + if (pRPort->CheckingState & (SK_RLMT_PCS_TX | SK_RLMT_PCS_RX)) { + /* Port is suspicious. Send the RLMT packet to the RLMT mc addr. */ + if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber, + SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress, + &SkRlmtMcAddr)) != NULL) { + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + } + } + else { + /* + * Send a directed RLMT packet to all ports that are + * checked by the indicated port. + */ + for (j = 0; j < pRPort->PortsChecked; j++) { + if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber, + SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress, + &pRPort->PortCheck[j].CheckAddr)) != NULL) { + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + } + } + } + } + + if ((pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG) && + (pAC->Rlmt.Port[PortNumber].Net->CheckingState & SK_RLMT_RCS_SEND_SEG)) { + /* + * Send a BPDU packet to make a connected switch tell us + * the correct root bridge. + */ + if ((Para.pParaPtr = + SkRlmtBuildSpanningTreePacket(pAC, IoC, PortNumber)) != NULL) { + pAC->Rlmt.Port[PortNumber].Net->CheckingState &= ~SK_RLMT_RCS_SEND_SEG; + pRPort->RootIdSet = SK_FALSE; + + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_TX, + ("SkRlmtSend: BPDU Packet on Port %u.\n", PortNumber)) + } + } + return; +} /* SkRlmtSend */ + + +/****************************************************************************** + * + * SkRlmtPortReceives - check if port is (going) down and bring it up + * + * Description: + * This routine checks if a port who received a non-BPDU packet + * needs to go up or needs to be stopped going down. + * + * Context: + * runtime, pageable? + * + * Returns: + * Nothing. + */ +RLMT_STATIC void SkRlmtPortReceives( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 PortNumber) /* Port to check */ +{ + SK_RLMT_PORT *pRPort; + SK_EVPARA Para; + + pRPort = &pAC->Rlmt.Port[PortNumber]; + pRPort->PortNoRx = SK_FALSE; + + if ((pRPort->PortState == SK_RLMT_PS_DOWN) && + !(pRPort->CheckingState & SK_RLMT_PCS_TX)) { + /* + * Port is marked down (rx), but received a non-BPDU packet. + * Bring it up. + */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Received on PortDown.\n")) + + pRPort->PortState = SK_RLMT_PS_GOING_UP; + pRPort->GuTimeStamp = SkOsGetTime(pAC); + Para.Para32[0] = PortNumber; + Para.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pRPort->UpTimer, SK_RLMT_PORTUP_TIM_VAL, + SKGE_RLMT, SK_RLMT_PORTUP_TIM, Para); + pRPort->CheckingState &= ~SK_RLMT_PCS_RX; + /* pAC->Rlmt.CheckSwitch = SK_TRUE; */ + SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); + } /* PortDown && !SuspectTx */ + else if (pRPort->CheckingState & SK_RLMT_PCS_RX) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Stop bringing port down.\n")) + SkTimerStop(pAC, IoC, &pRPort->DownRxTimer); + pRPort->CheckingState &= ~SK_RLMT_PCS_RX; + /* pAC->Rlmt.CheckSwitch = SK_TRUE; */ + SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); + } /* PortGoingDown */ + + return; +} /* SkRlmtPortReceives */ + + +/****************************************************************************** + * + * SkRlmtPacketReceive - receive a packet for closer examination + * + * Description: + * This routine examines a packet more closely than SK_RLMT_LOOKAHEAD. + * + * Context: + * runtime, pageable? + * + * Returns: + * Nothing. + */ +RLMT_STATIC void SkRlmtPacketReceive( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_MBUF *pMb) /* Received packet */ +{ +#ifdef xDEBUG + extern void DumpData(char *p, int size); +#endif /* DEBUG */ + int i; + unsigned j; + SK_U16 PacketType; + SK_U32 PortNumber; + SK_ADDR_PORT *pAPort; + SK_RLMT_PORT *pRPort; + SK_RLMT_PACKET *pRPacket; + SK_SPTREE_PACKET *pSPacket; + SK_EVPARA Para; + + PortNumber = pMb->PortIdx; + pAPort = &pAC->Addr.Port[PortNumber]; + pRPort = &pAC->Rlmt.Port[PortNumber]; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: PortNumber == %d.\n", PortNumber)) + + pRPacket = (SK_RLMT_PACKET*)pMb->pData; + pSPacket = (SK_SPTREE_PACKET*)pRPacket; + +#ifdef xDEBUG + DumpData((char *)pRPacket, 32); +#endif /* DEBUG */ + + if ((pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot) != 0) { + SkRlmtPortReceives(pAC, IoC, PortNumber); + } + + /* Check destination address. */ + + if (!SK_ADDR_EQUAL(pAPort->CurrentMacAddress.a, pRPacket->DstAddr) && + !SK_ADDR_EQUAL(SkRlmtMcAddr.a, pRPacket->DstAddr) && + !SK_ADDR_EQUAL(BridgeMcAddr.a, pRPacket->DstAddr)) { + + /* Not sent to current MAC or registered MC address => Trash it. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Not for me.\n")) + + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + return; + } + else if (SK_ADDR_EQUAL(pAPort->CurrentMacAddress.a, pRPacket->SrcAddr)) { + + /* + * Was sent by same port (may happen during port switching + * or in case of duplicate MAC addresses). + */ + + /* + * Check for duplicate address here: + * If Packet.Random != My.Random => DupAddr. + */ + for (i = 3; i >= 0; i--) { + if (pRPort->Random[i] != pRPacket->Random[i]) { + break; + } + } + + /* + * CAUTION: Do not check for duplicate MAC address in RLMT Alive Reply + * packets (they have the LLC_COMMAND_RESPONSE_BIT set in + * pRPacket->SSap). + */ + if (i >= 0 && pRPacket->DSap == SK_RLMT_DSAP && + pRPacket->Ctrl == SK_RLMT_CTRL && + pRPacket->SSap == SK_RLMT_SSAP && + pRPacket->Indicator[0] == SK_RLMT_INDICATOR0 && + pRPacket->Indicator[1] == SK_RLMT_INDICATOR1 && + pRPacket->Indicator[2] == SK_RLMT_INDICATOR2 && + pRPacket->Indicator[3] == SK_RLMT_INDICATOR3 && + pRPacket->Indicator[4] == SK_RLMT_INDICATOR4 && + pRPacket->Indicator[5] == SK_RLMT_INDICATOR5 && + pRPacket->Indicator[6] == SK_RLMT_INDICATOR6) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Duplicate MAC Address.\n")) + + /* Error Log entry. */ + SK_ERR_LOG(pAC, SK_ERRCL_COMM, SKERR_RLMT_E006, SKERR_RLMT_E006_MSG); + } + else { + /* Simply trash it. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Sent by me.\n")) + } + + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + return; + } + + /* Check SuspectTx entries. */ + if (pRPort->PortsSuspect > 0) { + for (j = 0; j < pRPort->PortsChecked; j++) { + if (pRPort->PortCheck[j].SuspectTx && + SK_ADDR_EQUAL( + pRPacket->SrcAddr, pRPort->PortCheck[j].CheckAddr.a)) { + pRPort->PortCheck[j].SuspectTx = SK_FALSE; + pRPort->PortsSuspect--; + break; + } + } + } + + /* Determine type of packet. */ + if (pRPacket->DSap == SK_RLMT_DSAP && + pRPacket->Ctrl == SK_RLMT_CTRL && + (pRPacket->SSap & ~LLC_COMMAND_RESPONSE_BIT) == SK_RLMT_SSAP && + pRPacket->Indicator[0] == SK_RLMT_INDICATOR0 && + pRPacket->Indicator[1] == SK_RLMT_INDICATOR1 && + pRPacket->Indicator[2] == SK_RLMT_INDICATOR2 && + pRPacket->Indicator[3] == SK_RLMT_INDICATOR3 && + pRPacket->Indicator[4] == SK_RLMT_INDICATOR4 && + pRPacket->Indicator[5] == SK_RLMT_INDICATOR5 && + pRPacket->Indicator[6] == SK_RLMT_INDICATOR6) { + + /* It's an RLMT packet. */ + PacketType = (SK_U16)((pRPacket->RlmtPacketType[0] << 8) | + pRPacket->RlmtPacketType[1]); + + switch (PacketType) { + case SK_PACKET_ANNOUNCE: /* Not yet used. */ +#if 0 + /* Build the check chain. */ + SkRlmtBuildCheckChain(pAC); +#endif /* 0 */ + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Announce.\n")) + + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + break; + + case SK_PACKET_ALIVE: + if (pRPacket->SSap & LLC_COMMAND_RESPONSE_BIT) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Alive Reply.\n")) + + if (!(pAC->Addr.Port[PortNumber].PromMode & SK_PROM_MODE_LLC) || + SK_ADDR_EQUAL( + pRPacket->DstAddr, pAPort->CurrentMacAddress.a)) { + /* Obviously we could send something. */ + if (pRPort->CheckingState & SK_RLMT_PCS_TX) { + pRPort->CheckingState &= ~SK_RLMT_PCS_TX; + SkTimerStop(pAC, IoC, &pRPort->DownTxTimer); + } + + if ((pRPort->PortState == SK_RLMT_PS_DOWN) && + !(pRPort->CheckingState & SK_RLMT_PCS_RX)) { + pRPort->PortState = SK_RLMT_PS_GOING_UP; + pRPort->GuTimeStamp = SkOsGetTime(pAC); + + SkTimerStop(pAC, IoC, &pRPort->DownTxTimer); + + Para.Para32[0] = PortNumber; + Para.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pRPort->UpTimer, + SK_RLMT_PORTUP_TIM_VAL, SKGE_RLMT, + SK_RLMT_PORTUP_TIM, Para); + } + } + + /* Mark sending port as alive? */ + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + } + else { /* Alive Request Packet. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Alive Request.\n")) + + pRPort->RxHelloCts++; + + /* Answer. */ + for (i = 0; i < SK_MAC_ADDR_LEN; i++) { + pRPacket->DstAddr[i] = pRPacket->SrcAddr[i]; + pRPacket->SrcAddr[i] = + pAC->Addr.Port[PortNumber].CurrentMacAddress.a[i]; + } + pRPacket->SSap |= LLC_COMMAND_RESPONSE_BIT; + + Para.pParaPtr = pMb; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + } + break; + + case SK_PACKET_CHECK_TX: + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Check your tx line.\n")) + + /* A port checking us requests us to check our tx line. */ + pRPort->CheckingState |= SK_RLMT_PCS_TX; + + /* Start PortDownTx timer. */ + Para.Para32[0] = PortNumber; + Para.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pRPort->DownTxTimer, + SK_RLMT_PORTDOWN_TIM_VAL, SKGE_RLMT, + SK_RLMT_PORTDOWN_TX_TIM, Para); + + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + + if ((Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, PortNumber, + SK_PACKET_ALIVE, &pAC->Addr.Port[PortNumber].CurrentMacAddress, + &SkRlmtMcAddr)) != NULL) { + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + } + break; + + case SK_PACKET_ADDR_CHANGED: + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Address Change.\n")) + + /* Build the check chain. */ + SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber); + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + break; + + default: + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Unknown RLMT packet.\n")) + + /* RA;:;: ??? */ + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + } + } + else if (pSPacket->DSap == SK_RLMT_SPT_DSAP && + pSPacket->Ctrl == SK_RLMT_SPT_CTRL && + (pSPacket->SSap & ~LLC_COMMAND_RESPONSE_BIT) == SK_RLMT_SPT_SSAP) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: BPDU Packet.\n")) + + /* Spanning Tree packet. */ + pRPort->RxSpHelloCts++; + + if (!SK_ADDR_EQUAL(&pSPacket->RootId[2], &pAC->Addr.Net[pAC->Rlmt. + Port[PortNumber].Net->NetNumber].CurrentMacAddress.a[0])) { + /* + * Check segmentation if a new root bridge is set and + * the segmentation check is not currently running. + */ + if (!SK_ADDR_EQUAL(&pSPacket->RootId[2], &pRPort->Root.Id[2]) && + (pAC->Rlmt.Port[PortNumber].Net->LinksUp > 1) && + (pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG) + != 0 && (pAC->Rlmt.Port[PortNumber].Net->CheckingState & + SK_RLMT_RCS_SEG) == 0) { + pAC->Rlmt.Port[PortNumber].Net->CheckingState |= + SK_RLMT_RCS_START_SEG | SK_RLMT_RCS_SEND_SEG; + } + + /* Store tree view of this port. */ + for (i = 0; i < 8; i++) { + pRPort->Root.Id[i] = pSPacket->RootId[i]; + } + pRPort->RootIdSet = SK_TRUE; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_DUMP, + ("Root ID %d: %02x %02x %02x %02x %02x %02x %02x %02x.\n", + PortNumber, + pRPort->Root.Id[0], pRPort->Root.Id[1], + pRPort->Root.Id[2], pRPort->Root.Id[3], + pRPort->Root.Id[4], pRPort->Root.Id[5], + pRPort->Root.Id[6], pRPort->Root.Id[7])) + } + + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + if ((pAC->Rlmt.Port[PortNumber].Net->CheckingState & + SK_RLMT_RCS_REPORT_SEG) != 0) { + SkRlmtCheckSeg(pAC, IoC, pAC->Rlmt.Port[PortNumber].Net->NetNumber); + } + } + else { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_RX, + ("SkRlmtPacketReceive: Unknown Packet Type.\n")) + + /* Unknown packet. */ + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + } + return; +} /* SkRlmtPacketReceive */ + + +/****************************************************************************** + * + * SkRlmtCheckPort - check if a port works + * + * Description: + * This routine checks if a port whose link is up received something + * and if it seems to transmit successfully. + * + * # PortState: PsInit, PsLinkDown, PsDown, PsGoingUp, PsUp + * # PortCheckingState (Bitfield): ChkTx, ChkRx, ChkSeg + * # RlmtCheckingState (Bitfield): ChkSeg, StartChkSeg, ReportSeg + * + * if (Rx - RxBpdu == 0) { # No rx. + * if (state == PsUp) { + * PortCheckingState |= ChkRx + * } + * if (ModeCheckSeg && (Timeout == + * TO_SHORTEN(RLMT_DEFAULT_TIMEOUT))) { + * RlmtCheckingState |= ChkSeg) + * PortCheckingState |= ChkSeg + * } + * NewTimeout = TO_SHORTEN(Timeout) + * if (NewTimeout < RLMT_MIN_TIMEOUT) { + * NewTimeout = RLMT_MIN_TIMEOUT + * PortState = PsDown + * ... + * } + * } + * else { # something was received + * # Set counter to 0 at LinkDown? + * # No - rx may be reported after LinkDown ??? + * PortCheckingState &= ~ChkRx + * NewTimeout = RLMT_DEFAULT_TIMEOUT + * if (RxAck == 0) { + * possible reasons: + * is my tx line bad? -- + * send RLMT multicast and report + * back internally? (only possible + * between ports on same adapter) + * } + * if (RxChk == 0) { + * possible reasons: + * - tx line of port set to check me + * maybe bad + * - no other port/adapter available or set + * to check me + * - adapter checking me has a longer + * timeout + * ??? anything that can be done here? + * } + * } + * + * Context: + * runtime, pageable? + * + * Returns: + * New timeout value. + */ +RLMT_STATIC SK_U32 SkRlmtCheckPort( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 PortNumber) /* Port to check */ +{ + unsigned i; + SK_U32 NewTimeout; + SK_RLMT_PORT *pRPort; + SK_EVPARA Para; + + pRPort = &pAC->Rlmt.Port[PortNumber]; + + if ((pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot) == 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SkRlmtCheckPort %d: No (%d) receives in last time slot.\n", + PortNumber, pRPort->PacketsPerTimeSlot)) + + /* + * Check segmentation if there was no receive at least twice + * in a row (PortNoRx is already set) and the segmentation + * check is not currently running. + */ + + if (pRPort->PortNoRx && (pAC->Rlmt.Port[PortNumber].Net->LinksUp > 1) && + (pAC->Rlmt.Port[PortNumber].Net->RlmtMode & SK_RLMT_CHECK_SEG) && + !(pAC->Rlmt.Port[PortNumber].Net->CheckingState & SK_RLMT_RCS_SEG)) { + pAC->Rlmt.Port[PortNumber].Net->CheckingState |= + SK_RLMT_RCS_START_SEG | SK_RLMT_RCS_SEND_SEG; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SkRlmtCheckPort: PortsSuspect %d, PcsRx %d.\n", + pRPort->PortsSuspect, pRPort->CheckingState & SK_RLMT_PCS_RX)) + + if (pRPort->PortState != SK_RLMT_PS_DOWN) { + NewTimeout = TO_SHORTEN(pAC->Rlmt.Port[PortNumber].Net->TimeoutValue); + if (NewTimeout < SK_RLMT_MIN_TO_VAL) { + NewTimeout = SK_RLMT_MIN_TO_VAL; + } + + if (!(pRPort->CheckingState & SK_RLMT_PCS_RX)) { + Para.Para32[0] = PortNumber; + pRPort->CheckingState |= SK_RLMT_PCS_RX; + + /* + * What shall we do if the port checked by this one receives + * our request frames? What's bad - our rx line or his tx line? + */ + Para.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pRPort->DownRxTimer, + SK_RLMT_PORTDOWN_TIM_VAL, SKGE_RLMT, + SK_RLMT_PORTDOWN_RX_TIM, Para); + + for (i = 0; i < pRPort->PortsChecked; i++) { + if (pRPort->PortCheck[i].SuspectTx) { + continue; + } + pRPort->PortCheck[i].SuspectTx = SK_TRUE; + pRPort->PortsSuspect++; + if ((Para.pParaPtr = + SkRlmtBuildPacket(pAC, IoC, PortNumber, SK_PACKET_CHECK_TX, + &pAC->Addr.Port[PortNumber].CurrentMacAddress, + &pRPort->PortCheck[i].CheckAddr)) != NULL) { + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + } + } + } + } + else { /* PortDown -- or all partners suspect. */ + NewTimeout = SK_RLMT_DEF_TO_VAL; + } + pRPort->PortNoRx = SK_TRUE; + } + else { /* A non-BPDU packet was received. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SkRlmtCheckPort %d: %d (%d) receives in last time slot.\n", + PortNumber, + pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot, + pRPort->PacketsPerTimeSlot)) + + SkRlmtPortReceives(pAC, IoC, PortNumber); + if (pAC->Rlmt.CheckSwitch) { + SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); + } + + NewTimeout = SK_RLMT_DEF_TO_VAL; + } + + return (NewTimeout); +} /* SkRlmtCheckPort */ + + +/****************************************************************************** + * + * SkRlmtSelectBcRx - select new active port, criteria 1 (CLP) + * + * Description: + * This routine selects the port that received a broadcast frame + * substantially later than all other ports. + * + * Context: + * runtime, pageable? + * + * Returns: + * SK_BOOL + */ +RLMT_STATIC SK_BOOL SkRlmtSelectBcRx( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Active, /* Active port */ +SK_U32 PrefPort, /* Preferred port */ +SK_U32 *pSelect) /* New active port */ +{ + SK_U64 BcTimeStamp; + SK_U32 i; + SK_BOOL PortFound; + + BcTimeStamp = 0; /* Not totally necessary, but feeling better. */ + PortFound = SK_FALSE; + + /* Select port with the latest TimeStamp. */ + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("TimeStamp Port %d (Down: %d, NoRx: %d): %08x %08x.\n", + i, + pAC->Rlmt.Port[i].PortDown, pAC->Rlmt.Port[i].PortNoRx, + *((SK_U32*)(&pAC->Rlmt.Port[i].BcTimeStamp) + OFFS_HI32), + *((SK_U32*)(&pAC->Rlmt.Port[i].BcTimeStamp) + OFFS_LO32))) + + if (!pAC->Rlmt.Port[i].PortDown && !pAC->Rlmt.Port[i].PortNoRx) { + if (!PortFound || pAC->Rlmt.Port[i].BcTimeStamp > BcTimeStamp) { + BcTimeStamp = pAC->Rlmt.Port[i].BcTimeStamp; + *pSelect = i; + PortFound = SK_TRUE; + } + } + } + + if (PortFound) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Port %d received the last broadcast.\n", *pSelect)) + + /* Look if another port's time stamp is similar. */ + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + if (i == *pSelect) { + continue; + } + if (!pAC->Rlmt.Port[i].PortDown && !pAC->Rlmt.Port[i].PortNoRx && + (pAC->Rlmt.Port[i].BcTimeStamp > + BcTimeStamp - SK_RLMT_BC_DELTA || + pAC->Rlmt.Port[i].BcTimeStamp + + SK_RLMT_BC_DELTA > BcTimeStamp)) { + PortFound = SK_FALSE; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Port %d received a broadcast at a similar time.\n", i)) + break; + } + } + } + +#ifdef DEBUG + if (PortFound) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SELECT_BCRX found Port %d receiving the substantially " + "latest broadcast (%u).\n", + *pSelect, + BcTimeStamp - pAC->Rlmt.Port[1 - *pSelect].BcTimeStamp)) + } +#endif /* DEBUG */ + + return (PortFound); +} /* SkRlmtSelectBcRx */ + + +/****************************************************************************** + * + * SkRlmtSelectNotSuspect - select new active port, criteria 2 (CLP) + * + * Description: + * This routine selects a good port (it is PortUp && !SuspectRx). + * + * Context: + * runtime, pageable? + * + * Returns: + * SK_BOOL + */ +RLMT_STATIC SK_BOOL SkRlmtSelectNotSuspect( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Active, /* Active port */ +SK_U32 PrefPort, /* Preferred port */ +SK_U32 *pSelect) /* New active port */ +{ + SK_U32 i; + SK_BOOL PortFound; + + PortFound = SK_FALSE; + + /* Select first port that is PortUp && !SuspectRx. */ + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + if (!pAC->Rlmt.Port[i].PortDown && + !(pAC->Rlmt.Port[i].CheckingState & SK_RLMT_PCS_RX)) { + *pSelect = i; + if (!pAC->Rlmt.Port[Active].PortDown && + !(pAC->Rlmt.Port[Active].CheckingState & SK_RLMT_PCS_RX)) { + *pSelect = Active; + } + if (!pAC->Rlmt.Port[PrefPort].PortDown && + !(pAC->Rlmt.Port[PrefPort].CheckingState & SK_RLMT_PCS_RX)) { + *pSelect = PrefPort; + } + PortFound = SK_TRUE; + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SELECT_NOTSUSPECT found Port %d up and not check RX.\n", + *pSelect)) + break; + } + } + return (PortFound); +} /* SkRlmtSelectNotSuspect */ + + +/****************************************************************************** + * + * SkRlmtSelectUp - select new active port, criteria 3, 4 (CLP) + * + * Description: + * This routine selects a port that is up. + * + * Context: + * runtime, pageable? + * + * Returns: + * SK_BOOL + */ +RLMT_STATIC SK_BOOL SkRlmtSelectUp( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Active, /* Active port */ +SK_U32 PrefPort, /* Preferred port */ +SK_U32 *pSelect, /* New active port */ +SK_BOOL AutoNegDone) /* Successfully auto-negotiated? */ +{ + SK_U32 i; + SK_BOOL PortFound; + + PortFound = SK_FALSE; + + /* Select first port that is PortUp. */ + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_UP && + pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) { + *pSelect = i; + if (pAC->Rlmt.Port[Active].PortState == SK_RLMT_PS_UP && + pAC->GIni.GP[Active].PAutoNegFail != AutoNegDone) { + *pSelect = Active; + } + if (pAC->Rlmt.Port[PrefPort].PortState == SK_RLMT_PS_UP && + pAC->GIni.GP[PrefPort].PAutoNegFail != AutoNegDone) { + *pSelect = PrefPort; + } + PortFound = SK_TRUE; + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SELECT_UP found Port %d up.\n", *pSelect)) + break; + } + } + return (PortFound); +} /* SkRlmtSelectUp */ + + +/****************************************************************************** + * + * SkRlmtSelectGoingUp - select new active port, criteria 5, 6 (CLP) + * + * Description: + * This routine selects the port that is going up for the longest time. + * + * Context: + * runtime, pageable? + * + * Returns: + * SK_BOOL + */ +RLMT_STATIC SK_BOOL SkRlmtSelectGoingUp( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Active, /* Active port */ +SK_U32 PrefPort, /* Preferred port */ +SK_U32 *pSelect, /* New active port */ +SK_BOOL AutoNegDone) /* Successfully auto-negotiated? */ +{ + SK_U64 GuTimeStamp; + SK_U32 i; + SK_BOOL PortFound; + + GuTimeStamp = 0; + PortFound = SK_FALSE; + + /* Select port that is PortGoingUp for the longest time. */ + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_GOING_UP && + pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) { + GuTimeStamp = pAC->Rlmt.Port[i].GuTimeStamp; + *pSelect = i; + PortFound = SK_TRUE; + break; + } + } + + if (!PortFound) { + return (SK_FALSE); + } + + for (i = *pSelect + 1; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_GOING_UP && + pAC->Rlmt.Port[i].GuTimeStamp < GuTimeStamp && + pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) { + GuTimeStamp = pAC->Rlmt.Port[i].GuTimeStamp; + *pSelect = i; + } + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SELECT_GOINGUP found Port %d going up.\n", *pSelect)) + return (SK_TRUE); +} /* SkRlmtSelectGoingUp */ + + +/****************************************************************************** + * + * SkRlmtSelectDown - select new active port, criteria 7, 8 (CLP) + * + * Description: + * This routine selects a port that is down. + * + * Context: + * runtime, pageable? + * + * Returns: + * SK_BOOL + */ +RLMT_STATIC SK_BOOL SkRlmtSelectDown( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Active, /* Active port */ +SK_U32 PrefPort, /* Preferred port */ +SK_U32 *pSelect, /* New active port */ +SK_BOOL AutoNegDone) /* Successfully auto-negotiated? */ +{ + SK_U32 i; + SK_BOOL PortFound; + + PortFound = SK_FALSE; + + /* Select first port that is PortDown. */ + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + if (pAC->Rlmt.Port[i].PortState == SK_RLMT_PS_DOWN && + pAC->GIni.GP[i].PAutoNegFail != AutoNegDone) { + *pSelect = i; + if (pAC->Rlmt.Port[Active].PortState == SK_RLMT_PS_DOWN && + pAC->GIni.GP[Active].PAutoNegFail != AutoNegDone) { + *pSelect = Active; + } + if (pAC->Rlmt.Port[PrefPort].PortState == SK_RLMT_PS_DOWN && + pAC->GIni.GP[PrefPort].PAutoNegFail != AutoNegDone) { + *pSelect = PrefPort; + } + PortFound = SK_TRUE; + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SELECT_DOWN found Port %d down.\n", *pSelect)) + break; + } + } + return (PortFound); +} /* SkRlmtSelectDown */ + + +/****************************************************************************** + * + * SkRlmtCheckSwitch - select new active port and switch to it + * + * Description: + * This routine decides which port should be the active one and queues + * port switching if necessary. + * + * Context: + * runtime, pageable? + * + * Returns: + * Nothing. + */ +RLMT_STATIC void SkRlmtCheckSwitch( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 NetIdx) /* Net index */ +{ + SK_EVPARA Para; + SK_U32 Active; + SK_U32 PrefPort; + SK_U32 i; + SK_BOOL PortFound; + + Active = pAC->Rlmt.Net[NetIdx].ActivePort; /* Index of active port. */ + PrefPort = pAC->Rlmt.Net[NetIdx].PrefPort; /* Index of preferred port. */ + PortFound = SK_FALSE; + pAC->Rlmt.CheckSwitch = SK_FALSE; + +#if 0 /* RW 2001/10/18 - active port becomes always prefered one */ + if (pAC->Rlmt.Net[NetIdx].Preference == 0xFFFFFFFF) { /* Automatic */ + /* disable auto-fail back */ + PrefPort = Active; + } +#endif + + if (pAC->Rlmt.Net[NetIdx].LinksUp == 0) { + /* Last link went down - shut down the net. */ + pAC->Rlmt.Net[NetIdx].RlmtState = SK_RLMT_RS_NET_DOWN; + Para.Para32[0] = SK_RLMT_NET_DOWN_TEMP; + Para.Para32[1] = NetIdx; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_DOWN, Para); + + Para.Para32[0] = pAC->Rlmt.Net[NetIdx]. + Port[pAC->Rlmt.Net[NetIdx].ActivePort]->PortNumber; + Para.Para32[1] = NetIdx; + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_DOWN, Para); + return; + } /* pAC->Rlmt.LinksUp == 0 */ + else if (pAC->Rlmt.Net[NetIdx].LinksUp == 1 && + pAC->Rlmt.Net[NetIdx].RlmtState == SK_RLMT_RS_NET_DOWN) { + /* First link came up - get the net up. */ + pAC->Rlmt.Net[NetIdx].RlmtState = SK_RLMT_RS_NET_UP; + + /* + * If pAC->Rlmt.ActivePort != Para.Para32[0], + * the DRV switches to the port that came up. + */ + for (i = 0; i < pAC->Rlmt.Net[NetIdx].NumPorts; i++) { + if (!pAC->Rlmt.Net[NetIdx].Port[i]->LinkDown) { + if (!pAC->Rlmt.Net[NetIdx].Port[Active]->LinkDown) { + i = Active; + } + if (!pAC->Rlmt.Net[NetIdx].Port[PrefPort]->LinkDown) { + i = PrefPort; + } + PortFound = SK_TRUE; + break; + } + } + + if (PortFound) { + Para.Para32[0] = pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber; + Para.Para32[1] = NetIdx; + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_UP, Para); + + pAC->Rlmt.Net[NetIdx].ActivePort = i; + Para.Para32[0] = pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber; + Para.Para32[1] = NetIdx; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_UP, Para); + + if ((pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_TRANSPARENT) == 0 && + (Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, + pAC->Rlmt.Net[NetIdx].Port[i]->PortNumber, + SK_PACKET_ANNOUNCE, &pAC->Addr.Net[NetIdx]. + CurrentMacAddress, &SkRlmtMcAddr)) != NULL) { + /* + * Send announce packet to RLMT multicast address to force + * switches to learn the new location of the logical MAC address. + */ + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + } + } + else { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E007, SKERR_RLMT_E007_MSG); + } + + return; + } /* LinksUp == 1 && RlmtState == SK_RLMT_RS_NET_DOWN */ + else { /* Cannot be reached in dual-net mode. */ + Para.Para32[0] = Active; + + /* + * Preselection: + * If RLMT Mode != CheckLinkState + * select port that received a broadcast frame substantially later + * than all other ports + * else select first port that is not SuspectRx + * else select first port that is PortUp + * else select port that is PortGoingUp for the longest time + * else select first port that is PortDown + * else stop. + * + * For the preselected port: + * If ActivePort is equal in quality, select ActivePort. + * + * If PrefPort is equal in quality, select PrefPort. + * + * If ActivePort != SelectedPort, + * If old ActivePort is LinkDown, + * SwitchHard + * else + * SwitchSoft + */ + /* check of ChgBcPrio flag added */ + if ((pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) && + (!pAC->Rlmt.Net[0].ChgBcPrio)) { + + if (!PortFound) { + PortFound = SkRlmtSelectBcRx( + pAC, IoC, Active, PrefPort, &Para.Para32[1]); + } + + if (!PortFound) { + PortFound = SkRlmtSelectNotSuspect( + pAC, IoC, Active, PrefPort, &Para.Para32[1]); + } + } /* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */ + + /* with changed priority for last broadcast received */ + if ((pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) && + (pAC->Rlmt.Net[0].ChgBcPrio)) { + if (!PortFound) { + PortFound = SkRlmtSelectNotSuspect( + pAC, IoC, Active, PrefPort, &Para.Para32[1]); + } + + if (!PortFound) { + PortFound = SkRlmtSelectBcRx( + pAC, IoC, Active, PrefPort, &Para.Para32[1]); + } + } /* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */ + + if (!PortFound) { + PortFound = SkRlmtSelectUp( + pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS); + } + + if (!PortFound) { + PortFound = SkRlmtSelectUp( + pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED); + } + + if (!PortFound) { + PortFound = SkRlmtSelectGoingUp( + pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS); + } + + if (!PortFound) { + PortFound = SkRlmtSelectGoingUp( + pAC, IoC, Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED); + } + + if (pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) { + if (!PortFound) { + PortFound = SkRlmtSelectDown(pAC, IoC, + Active, PrefPort, &Para.Para32[1], AUTONEG_SUCCESS); + } + + if (!PortFound) { + PortFound = SkRlmtSelectDown(pAC, IoC, + Active, PrefPort, &Para.Para32[1], AUTONEG_FAILED); + } + } /* pAC->Rlmt.RlmtMode != SK_RLMT_MODE_CLS */ + + if (PortFound) { + + if (Para.Para32[1] != Active) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Active: %d, Para1: %d.\n", Active, Para.Para32[1])) + pAC->Rlmt.Net[NetIdx].ActivePort = Para.Para32[1]; + Para.Para32[0] = pAC->Rlmt.Net[NetIdx]. + Port[Para.Para32[0]]->PortNumber; + Para.Para32[1] = pAC->Rlmt.Net[NetIdx]. + Port[Para.Para32[1]]->PortNumber; + SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[1], SK_LED_ACTIVE); + if (pAC->Rlmt.Port[Active].LinkDown) { + SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_HARD, Para); + } + else { + SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_STANDBY); + SkEventQueue(pAC, SKGE_DRV, SK_DRV_SWITCH_SOFT, Para); + } + Para.Para32[1] = NetIdx; + Para.Para32[0] = + pAC->Rlmt.Net[NetIdx].Port[Para.Para32[0]]->PortNumber; + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_DOWN, Para); + Para.Para32[0] = pAC->Rlmt.Net[NetIdx]. + Port[pAC->Rlmt.Net[NetIdx].ActivePort]->PortNumber; + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_ACTIVE_UP, Para); + if ((pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_TRANSPARENT) == 0 && + (Para.pParaPtr = SkRlmtBuildPacket(pAC, IoC, Para.Para32[0], + SK_PACKET_ANNOUNCE, &pAC->Addr.Net[NetIdx].CurrentMacAddress, + &SkRlmtMcAddr)) != NULL) { + /* + * Send announce packet to RLMT multicast address to force + * switches to learn the new location of the logical + * MAC address. + */ + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para); + } /* (Para.pParaPtr = SkRlmtBuildPacket(...)) != NULL */ + } /* Para.Para32[1] != Active */ + } /* PortFound */ + else { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E004, SKERR_RLMT_E004_MSG); + } + } /* LinksUp > 1 || LinksUp == 1 && RlmtState != SK_RLMT_RS_NET_DOWN */ + return; +} /* SkRlmtCheckSwitch */ + + +/****************************************************************************** + * + * SkRlmtCheckSeg - Report if segmentation is detected + * + * Description: + * This routine checks if the ports see different root bridges and reports + * segmentation in such a case. + * + * Context: + * runtime, pageable? + * + * Returns: + * Nothing. + */ +RLMT_STATIC void SkRlmtCheckSeg( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 NetIdx) /* Net number */ +{ + SK_EVPARA Para; + SK_RLMT_NET *pNet; + SK_U32 i, j; + SK_BOOL Equal; + + pNet = &pAC->Rlmt.Net[NetIdx]; + pNet->RootIdSet = SK_FALSE; + Equal = SK_TRUE; + + for (i = 0; i < pNet->NumPorts; i++) { + if (pNet->Port[i]->LinkDown || !pNet->Port[i]->RootIdSet) { + continue; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_DUMP, + ("Root ID %d: %02x %02x %02x %02x %02x %02x %02x %02x.\n", i, + pNet->Port[i]->Root.Id[0], pNet->Port[i]->Root.Id[1], + pNet->Port[i]->Root.Id[2], pNet->Port[i]->Root.Id[3], + pNet->Port[i]->Root.Id[4], pNet->Port[i]->Root.Id[5], + pNet->Port[i]->Root.Id[6], pNet->Port[i]->Root.Id[7])) + + if (!pNet->RootIdSet) { + pNet->Root = pNet->Port[i]->Root; + pNet->RootIdSet = SK_TRUE; + continue; + } + + for (j = 0; j < 8; j ++) { + Equal &= pNet->Port[i]->Root.Id[j] == pNet->Root.Id[j]; + if (!Equal) { + break; + } + } + + if (!Equal) { + SK_ERR_LOG(pAC, SK_ERRCL_COMM, SKERR_RLMT_E005, SKERR_RLMT_E005_MSG); + Para.Para32[0] = NetIdx; + Para.Para32[1] = (SK_U32)-1; + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SEGMENTATION, Para); + + pNet->CheckingState &= ~SK_RLMT_RCS_REPORT_SEG; + + /* 2000-03-06 RA: New. */ + Para.Para32[0] = NetIdx; + Para.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pNet->SegTimer, SK_RLMT_SEG_TO_VAL, + SKGE_RLMT, SK_RLMT_SEG_TIM, Para); + break; + } + } /* for (i = 0; i < pNet->NumPorts; i++) */ + + /* 2000-03-06 RA: Moved here. */ + /* Segmentation check not running anymore. */ + pNet->CheckingState &= ~SK_RLMT_RCS_SEG; + +} /* SkRlmtCheckSeg */ + + +/****************************************************************************** + * + * SkRlmtPortStart - initialize port variables and start port + * + * Description: + * This routine initializes a port's variables and issues a PORT_START + * to the HWAC module. This handles retries if the start fails or the + * link eventually goes down. + * + * Context: + * runtime, pageable? + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtPortStart( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 PortNumber) /* Port number */ +{ + SK_EVPARA Para; + + pAC->Rlmt.Port[PortNumber].PortState = SK_RLMT_PS_LINK_DOWN; + pAC->Rlmt.Port[PortNumber].PortStarted = SK_TRUE; + pAC->Rlmt.Port[PortNumber].LinkDown = SK_TRUE; + pAC->Rlmt.Port[PortNumber].PortDown = SK_TRUE; + pAC->Rlmt.Port[PortNumber].CheckingState = 0; + pAC->Rlmt.Port[PortNumber].RootIdSet = SK_FALSE; + Para.Para32[0] = PortNumber; + Para.Para32[1] = (SK_U32)-1; + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_START, Para); +} /* SkRlmtPortStart */ + + +/****************************************************************************** + * + * SkRlmtEvtPortStartTim - PORT_START_TIM + * + * Description: + * This routine handles PORT_START_TIM events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtPortStartTim( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */ +{ + SK_U32 i; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTSTART_TIMEOUT Port %d Event BEGIN.\n", Para.Para32[0])) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTSTART_TIMEOUT Event EMPTY.\n")) + return; + } + + /* + * Used to start non-preferred ports if the preferred one + * does not come up. + * This timeout needs only be set when starting the first + * (preferred) port. + */ + if (pAC->Rlmt.Port[Para.Para32[0]].LinkDown) { + /* PORT_START failed. */ + for (i = 0; i < pAC->Rlmt.Port[Para.Para32[0]].Net->NumPorts; i++) { + if (!pAC->Rlmt.Port[Para.Para32[0]].Net->Port[i]->PortStarted) { + SkRlmtPortStart(pAC, IoC, + pAC->Rlmt.Port[Para.Para32[0]].Net->Port[i]->PortNumber); + } + } + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTSTART_TIMEOUT Event END.\n")) +} /* SkRlmtEvtPortStartTim */ + + +/****************************************************************************** + * + * SkRlmtEvtLinkUp - LINK_UP + * + * Description: + * This routine handles LLINK_UP events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtLinkUp( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 Undefined */ +{ + SK_U32 i; + SK_RLMT_PORT *pRPort; + SK_EVPARA Para2; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_LINK_UP Port %d Event BEGIN.\n", Para.Para32[0])) + + pRPort = &pAC->Rlmt.Port[Para.Para32[0]]; + if (!pRPort->PortStarted) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E008, SKERR_RLMT_E008_MSG); + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_LINK_UP Event EMPTY.\n")) + return; + } + + if (!pRPort->LinkDown) { + /* RA;:;: Any better solution? */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_LINK_UP Event EMPTY.\n")) + return; + } + + SkTimerStop(pAC, IoC, &pRPort->UpTimer); + SkTimerStop(pAC, IoC, &pRPort->DownRxTimer); + SkTimerStop(pAC, IoC, &pRPort->DownTxTimer); + + /* Do something if timer already fired? */ + + pRPort->LinkDown = SK_FALSE; + pRPort->PortState = SK_RLMT_PS_GOING_UP; + pRPort->GuTimeStamp = SkOsGetTime(pAC); + pRPort->BcTimeStamp = 0; + pRPort->Net->LinksUp++; + if (pRPort->Net->LinksUp == 1) { + SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_ACTIVE); + } + else { + SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_STANDBY); + } + + for (i = 0; i < pRPort->Net->NumPorts; i++) { + if (!pRPort->Net->Port[i]->PortStarted) { + SkRlmtPortStart(pAC, IoC, pRPort->Net->Port[i]->PortNumber); + } + } + + SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); + + if (pRPort->Net->LinksUp >= 2) { + if (pRPort->Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) { + /* Build the check chain. */ + SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber); + } + } + + /* If the first link comes up, start the periodical RLMT timeout. */ + if (pRPort->Net->NumPorts > 1 && pRPort->Net->LinksUp == 1 && + (pRPort->Net->RlmtMode & SK_RLMT_CHECK_OTHERS) != 0) { + Para2.Para32[0] = pRPort->Net->NetNumber; + Para2.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pRPort->Net->LocTimer, + pRPort->Net->TimeoutValue, SKGE_RLMT, SK_RLMT_TIM, Para2); + } + + Para2 = Para; + Para2.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pRPort->UpTimer, SK_RLMT_PORTUP_TIM_VAL, + SKGE_RLMT, SK_RLMT_PORTUP_TIM, Para2); + + /* Later: if (pAC->Rlmt.RlmtMode & SK_RLMT_CHECK_LOC_LINK) && */ + if ((pRPort->Net->RlmtMode & SK_RLMT_TRANSPARENT) == 0 && + (pRPort->Net->RlmtMode & SK_RLMT_CHECK_LINK) != 0 && + (Para2.pParaPtr = + SkRlmtBuildPacket(pAC, IoC, Para.Para32[0], SK_PACKET_ANNOUNCE, + &pAC->Addr.Port[Para.Para32[0]].CurrentMacAddress, &SkRlmtMcAddr) + ) != NULL) { + /* Send "new" packet to RLMT multicast address. */ + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2); + } + + if (pRPort->Net->RlmtMode & SK_RLMT_CHECK_SEG) { + if ((Para2.pParaPtr = + SkRlmtBuildSpanningTreePacket(pAC, IoC, Para.Para32[0])) != NULL) { + pAC->Rlmt.Port[Para.Para32[0]].RootIdSet = SK_FALSE; + pRPort->Net->CheckingState |= + SK_RLMT_RCS_SEG | SK_RLMT_RCS_REPORT_SEG; + + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2); + + Para.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pRPort->Net->SegTimer, + SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para); + } + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_LINK_UP Event END.\n")) +} /* SkRlmtEvtLinkUp */ + + +/****************************************************************************** + * + * SkRlmtEvtPortUpTim - PORT_UP_TIM + * + * Description: + * This routine handles PORT_UP_TIM events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtPortUpTim( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */ +{ + SK_RLMT_PORT *pRPort; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTUP_TIM Port %d Event BEGIN.\n", Para.Para32[0])) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTUP_TIM Event EMPTY.\n")) + return; + } + + pRPort = &pAC->Rlmt.Port[Para.Para32[0]]; + if (pRPort->LinkDown || (pRPort->PortState == SK_RLMT_PS_UP)) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTUP_TIM Port %d Event EMPTY.\n", Para.Para32[0])) + return; + } + + pRPort->PortDown = SK_FALSE; + pRPort->PortState = SK_RLMT_PS_UP; + pRPort->Net->PortsUp++; + if (pRPort->Net->RlmtState != SK_RLMT_RS_INIT) { + if (pAC->Rlmt.NumNets <= 1) { + SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); + } + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_PORT_UP, Para); + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTUP_TIM Event END.\n")) +} /* SkRlmtEvtPortUpTim */ + + +/****************************************************************************** + * + * SkRlmtEvtPortDownTim - PORT_DOWN_* + * + * Description: + * This routine handles PORT_DOWN_* events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtPortDownX( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Event, /* Event code */ +SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */ +{ + SK_RLMT_PORT *pRPort; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTDOWN* Port %d Event (%d) BEGIN.\n", + Para.Para32[0], Event)) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTDOWN* Event EMPTY.\n")) + return; + } + + pRPort = &pAC->Rlmt.Port[Para.Para32[0]]; + if (!pRPort->PortStarted || (Event == SK_RLMT_PORTDOWN_TX_TIM && + !(pRPort->CheckingState & SK_RLMT_PCS_TX))) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTDOWN* Event (%d) EMPTY.\n", Event)) + return; + } + + /* Stop port's timers. */ + SkTimerStop(pAC, IoC, &pRPort->UpTimer); + SkTimerStop(pAC, IoC, &pRPort->DownRxTimer); + SkTimerStop(pAC, IoC, &pRPort->DownTxTimer); + + if (pRPort->PortState != SK_RLMT_PS_LINK_DOWN) { + pRPort->PortState = SK_RLMT_PS_DOWN; + } + + if (!pRPort->PortDown) { + pRPort->Net->PortsUp--; + pRPort->PortDown = SK_TRUE; + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_PORT_DOWN, Para); + } + + pRPort->PacketsPerTimeSlot = 0; + /* pRPort->DataPacketsPerTimeSlot = 0; */ + pRPort->BpduPacketsPerTimeSlot = 0; + pRPort->BcTimeStamp = 0; + + /* + * RA;:;: To be checked: + * - actions at RLMT_STOP: We should not switch anymore. + */ + if (pRPort->Net->RlmtState != SK_RLMT_RS_INIT) { + if (Para.Para32[0] == + pRPort->Net->Port[pRPort->Net->ActivePort]->PortNumber) { + /* Active Port went down. */ + SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); + } + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORTDOWN* Event (%d) END.\n", Event)) +} /* SkRlmtEvtPortDownX */ + + +/****************************************************************************** + * + * SkRlmtEvtLinkDown - LINK_DOWN + * + * Description: + * This routine handles LINK_DOWN events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtLinkDown( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 Undefined */ +{ + SK_RLMT_PORT *pRPort; + + pRPort = &pAC->Rlmt.Port[Para.Para32[0]]; + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_LINK_DOWN Port %d Event BEGIN.\n", Para.Para32[0])) + + if (!pAC->Rlmt.Port[Para.Para32[0]].LinkDown) { + pRPort->Net->LinksUp--; + pRPort->LinkDown = SK_TRUE; + pRPort->PortState = SK_RLMT_PS_LINK_DOWN; + SK_HWAC_LINK_LED(pAC, IoC, Para.Para32[0], SK_LED_OFF); + + if ((pRPort->Net->RlmtMode & SK_RLMT_CHECK_LOC_LINK) != 0) { + /* Build the check chain. */ + SkRlmtBuildCheckChain(pAC, pRPort->Net->NetNumber); + } + + /* Ensure that port is marked down. */ + Para.Para32[1] = -1; + (void)SkRlmtEvent(pAC, IoC, SK_RLMT_PORTDOWN, Para); + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_LINK_DOWN Event END.\n")) +} /* SkRlmtEvtLinkDown */ + + +/****************************************************************************** + * + * SkRlmtEvtPortAddr - PORT_ADDR + * + * Description: + * This routine handles PORT_ADDR events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtPortAddr( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */ +{ + SK_U32 i, j; + SK_RLMT_PORT *pRPort; + SK_MAC_ADDR *pOldMacAddr; + SK_MAC_ADDR *pNewMacAddr; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORT_ADDR Port %d Event BEGIN.\n", Para.Para32[0])) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORT_ADDR Event EMPTY.\n")) + return; + } + + /* Port's physical MAC address changed. */ + pOldMacAddr = &pAC->Addr.Port[Para.Para32[0]].PreviousMacAddress; + pNewMacAddr = &pAC->Addr.Port[Para.Para32[0]].CurrentMacAddress; + + /* + * NOTE: This is not scalable for solutions where ports are + * checked remotely. There, we need to send an RLMT + * address change packet - and how do we ensure delivery? + */ + for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { + pRPort = &pAC->Rlmt.Port[i]; + for (j = 0; j < pRPort->PortsChecked; j++) { + if (SK_ADDR_EQUAL( + pRPort->PortCheck[j].CheckAddr.a, pOldMacAddr->a)) { + pRPort->PortCheck[j].CheckAddr = *pNewMacAddr; + } + } + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PORT_ADDR Event END.\n")) +} /* SkRlmtEvtPortAddr */ + + +/****************************************************************************** + * + * SkRlmtEvtStart - START + * + * Description: + * This routine handles START events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtStart( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ +{ + SK_EVPARA Para2; + SK_U32 PortIdx; + SK_U32 PortNumber; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_START Net %d Event BEGIN.\n", Para.Para32[0])) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_START Event EMPTY.\n")) + return; + } + + if (Para.Para32[0] >= pAC->Rlmt.NumNets) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad NetNumber %d.\n", Para.Para32[0])) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_START Event EMPTY.\n")) + return; + } + + if (pAC->Rlmt.Net[Para.Para32[0]].RlmtState != SK_RLMT_RS_INIT) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_START Event EMPTY.\n")) + return; + } + + if (pAC->Rlmt.NetsStarted >= pAC->Rlmt.NumNets) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("All nets should have been started.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_START Event EMPTY.\n")) + return; + } + + if (pAC->Rlmt.Net[Para.Para32[0]].PrefPort >= + pAC->Rlmt.Net[Para.Para32[0]].NumPorts) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E009, SKERR_RLMT_E009_MSG); + + /* Change PrefPort to internal default. */ + Para2.Para32[0] = 0xFFFFFFFF; + Para2.Para32[1] = Para.Para32[0]; + (void)SkRlmtEvent(pAC, IoC, SK_RLMT_PREFPORT_CHANGE, Para2); + } + + PortIdx = pAC->Rlmt.Net[Para.Para32[0]].PrefPort; + PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[PortIdx]->PortNumber; + + pAC->Rlmt.Net[Para.Para32[0]].LinksUp = 0; + pAC->Rlmt.Net[Para.Para32[0]].PortsUp = 0; + pAC->Rlmt.Net[Para.Para32[0]].CheckingState = 0; + pAC->Rlmt.Net[Para.Para32[0]].RlmtState = SK_RLMT_RS_NET_DOWN; + + /* Start preferred port. */ + SkRlmtPortStart(pAC, IoC, PortNumber); + + /* Start Timer (for first port only). */ + Para2.Para32[0] = PortNumber; + Para2.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pAC->Rlmt.Port[PortNumber].UpTimer, + SK_RLMT_PORTSTART_TIM_VAL, SKGE_RLMT, SK_RLMT_PORTSTART_TIM, Para2); + + pAC->Rlmt.NetsStarted++; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_START Event END.\n")) +} /* SkRlmtEvtStart */ + + +/****************************************************************************** + * + * SkRlmtEvtStop - STOP + * + * Description: + * This routine handles STOP events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtStop( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ +{ + SK_EVPARA Para2; + SK_U32 PortNumber; + SK_U32 i; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STOP Net %d Event BEGIN.\n", Para.Para32[0])) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STOP Event EMPTY.\n")) + return; + } + + if (Para.Para32[0] >= pAC->Rlmt.NumNets) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad NetNumber %d.\n", Para.Para32[0])) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STOP Event EMPTY.\n")) + return; + } + + if (pAC->Rlmt.Net[Para.Para32[0]].RlmtState == SK_RLMT_RS_INIT) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STOP Event EMPTY.\n")) + return; + } + + if (pAC->Rlmt.NetsStarted == 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("All nets are stopped.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STOP Event EMPTY.\n")) + return; + } + + /* Stop RLMT timers. */ + SkTimerStop(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].LocTimer); + SkTimerStop(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].SegTimer); + + /* Stop net. */ + pAC->Rlmt.Net[Para.Para32[0]].RlmtState = SK_RLMT_RS_INIT; + pAC->Rlmt.Net[Para.Para32[0]].RootIdSet = SK_FALSE; + Para2.Para32[0] = SK_RLMT_NET_DOWN_FINAL; + Para2.Para32[1] = Para.Para32[0]; /* Net# */ + SkEventQueue(pAC, SKGE_DRV, SK_DRV_NET_DOWN, Para2); + + /* Stop ports. */ + for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) { + PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber; + if (pAC->Rlmt.Port[PortNumber].PortState != SK_RLMT_PS_INIT) { + SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].UpTimer); + SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].DownRxTimer); + SkTimerStop(pAC, IoC, &pAC->Rlmt.Port[PortNumber].DownTxTimer); + + pAC->Rlmt.Port[PortNumber].PortState = SK_RLMT_PS_INIT; + pAC->Rlmt.Port[PortNumber].RootIdSet = SK_FALSE; + pAC->Rlmt.Port[PortNumber].PortStarted = SK_FALSE; + Para2.Para32[0] = PortNumber; + Para2.Para32[1] = (SK_U32)-1; + SkEventQueue(pAC, SKGE_HWAC, SK_HWEV_PORT_STOP, Para2); + } + } + + pAC->Rlmt.NetsStarted--; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STOP Event END.\n")) +} /* SkRlmtEvtStop */ + + +/****************************************************************************** + * + * SkRlmtEvtTim - TIM + * + * Description: + * This routine handles TIM events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtTim( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ +{ + SK_RLMT_PORT *pRPort; + SK_U32 Timeout; + SK_U32 NewTimeout; + SK_U32 PortNumber; + SK_U32 i; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_TIM Event BEGIN.\n")) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_TIM Event EMPTY.\n")) + return; + } + + if ((pAC->Rlmt.Net[Para.Para32[0]].RlmtMode & SK_RLMT_CHECK_OTHERS) == 0 || + pAC->Rlmt.Net[Para.Para32[0]].LinksUp == 0) { + /* Mode changed or all links down: No more link checking. */ + return; + } + +#if 0 + pAC->Rlmt.SwitchCheckCounter--; + if (pAC->Rlmt.SwitchCheckCounter == 0) { + pAC->Rlmt.SwitchCheckCounter; + } +#endif /* 0 */ + + NewTimeout = SK_RLMT_DEF_TO_VAL; + for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) { + PortNumber = pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber; + pRPort = &pAC->Rlmt.Port[PortNumber]; + if (!pRPort->LinkDown) { + Timeout = SkRlmtCheckPort(pAC, IoC, PortNumber); + if (Timeout < NewTimeout) { + NewTimeout = Timeout; + } + + /* + * These counters should be set to 0 for all ports before the + * first frame is sent in the next loop. + */ + pRPort->PacketsPerTimeSlot = 0; + /* pRPort->DataPacketsPerTimeSlot = 0; */ + pRPort->BpduPacketsPerTimeSlot = 0; + } + } + pAC->Rlmt.Net[Para.Para32[0]].TimeoutValue = NewTimeout; + + if (pAC->Rlmt.Net[Para.Para32[0]].LinksUp > 1) { + /* + * If checking remote ports, also send packets if + * (LinksUp == 1) && + * this port checks at least one (remote) port. + */ + + /* + * Must be new loop, as SkRlmtCheckPort can request to + * check segmentation when e.g. checking the last port. + */ + for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) { + if (!pAC->Rlmt.Net[Para.Para32[0]].Port[i]->LinkDown) { + SkRlmtSend(pAC, IoC, + pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber); + } + } + } + + SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].LocTimer, + pAC->Rlmt.Net[Para.Para32[0]].TimeoutValue, SKGE_RLMT, SK_RLMT_TIM, + Para); + + if (pAC->Rlmt.Net[Para.Para32[0]].LinksUp > 1 && + (pAC->Rlmt.Net[Para.Para32[0]].RlmtMode & SK_RLMT_CHECK_SEG) && + (pAC->Rlmt.Net[Para.Para32[0]].CheckingState & SK_RLMT_RCS_START_SEG)) { + SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[0]].SegTimer, + SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para); + pAC->Rlmt.Net[Para.Para32[0]].CheckingState &= ~SK_RLMT_RCS_START_SEG; + pAC->Rlmt.Net[Para.Para32[0]].CheckingState |= + SK_RLMT_RCS_SEG | SK_RLMT_RCS_REPORT_SEG; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_TIM Event END.\n")) +} /* SkRlmtEvtTim */ + + +/****************************************************************************** + * + * SkRlmtEvtSegTim - SEG_TIM + * + * Description: + * This routine handles SEG_TIM events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtSegTim( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ +{ +#ifdef xDEBUG + int j; +#endif /* DEBUG */ + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SEG_TIM Event BEGIN.\n")) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SEG_TIM Event EMPTY.\n")) + return; + } + +#ifdef xDEBUG + for (j = 0; j < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; j++) { + SK_ADDR_PORT *pAPort; + SK_U32 k; + SK_U16 *InAddr; + SK_U8 InAddr8[6]; + + InAddr = (SK_U16 *)&InAddr8[0]; + pAPort = pAC->Rlmt.Net[Para.Para32[0]].Port[j]->AddrPort; + for (k = 0; k < pAPort->NextExactMatchRlmt; k++) { + /* Get exact match address k from port j. */ + XM_INADDR(IoC, pAC->Rlmt.Net[Para.Para32[0]].Port[j]->PortNumber, + XM_EXM(k), InAddr); + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("MC address %d on Port %u: %02x %02x %02x %02x %02x %02x -- %02x %02x %02x %02x %02x %02x.\n", + k, pAC->Rlmt.Net[Para.Para32[0]].Port[j]->PortNumber, + InAddr8[0], InAddr8[1], InAddr8[2], + InAddr8[3], InAddr8[4], InAddr8[5], + pAPort->Exact[k].a[0], pAPort->Exact[k].a[1], + pAPort->Exact[k].a[2], pAPort->Exact[k].a[3], + pAPort->Exact[k].a[4], pAPort->Exact[k].a[5])) + } + } +#endif /* xDEBUG */ + + SkRlmtCheckSeg(pAC, IoC, Para.Para32[0]); + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SEG_TIM Event END.\n")) +} /* SkRlmtEvtSegTim */ + + +/****************************************************************************** + * + * SkRlmtEvtPacketRx - PACKET_RECEIVED + * + * Description: + * This routine handles PACKET_RECEIVED events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtPacketRx( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_MBUF *pMb */ +{ + SK_MBUF *pMb; + SK_MBUF *pNextMb; + SK_U32 NetNumber; + + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PACKET_RECEIVED Event BEGIN.\n")) + + /* Should we ignore frames during port switching? */ + +#ifdef DEBUG + pMb = Para.pParaPtr; + if (pMb == NULL) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, ("No mbuf.\n")) + } + else if (pMb->pNext != NULL) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("More than one mbuf or pMb->pNext not set.\n")) + } +#endif /* DEBUG */ + + for (pMb = Para.pParaPtr; pMb != NULL; pMb = pNextMb) { + pNextMb = pMb->pNext; + pMb->pNext = NULL; + + NetNumber = pAC->Rlmt.Port[pMb->PortIdx].Net->NetNumber; + if (pAC->Rlmt.Net[NetNumber].RlmtState == SK_RLMT_RS_INIT) { + SkDrvFreeRlmtMbuf(pAC, IoC, pMb); + } + else { + SkRlmtPacketReceive(pAC, IoC, pMb); + } + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PACKET_RECEIVED Event END.\n")) +} /* SkRlmtEvtPacketRx */ + + +/****************************************************************************** + * + * SkRlmtEvtStatsClear - STATS_CLEAR + * + * Description: + * This routine handles STATS_CLEAR events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtStatsClear( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ +{ + SK_U32 i; + SK_RLMT_PORT *pRPort; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_CLEAR Event BEGIN.\n")) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_CLEAR Event EMPTY.\n")) + return; + } + + if (Para.Para32[0] >= pAC->Rlmt.NumNets) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad NetNumber %d.\n", Para.Para32[0])) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_CLEAR Event EMPTY.\n")) + return; + } + + /* Clear statistics for logical and physical ports. */ + for (i = 0; i < pAC->Rlmt.Net[Para.Para32[0]].NumPorts; i++) { + pRPort = + &pAC->Rlmt.Port[pAC->Rlmt.Net[Para.Para32[0]].Port[i]->PortNumber]; + pRPort->TxHelloCts = 0; + pRPort->RxHelloCts = 0; + pRPort->TxSpHelloReqCts = 0; + pRPort->RxSpHelloCts = 0; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_CLEAR Event END.\n")) +} /* SkRlmtEvtStatsClear */ + + +/****************************************************************************** + * + * SkRlmtEvtStatsUpdate - STATS_UPDATE + * + * Description: + * This routine handles STATS_UPDATE events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtStatsUpdate( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_UPDATE Event BEGIN.\n")) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_UPDATE Event EMPTY.\n")) + return; + } + + if (Para.Para32[0] >= pAC->Rlmt.NumNets) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad NetNumber %d.\n", Para.Para32[0])) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_UPDATE Event EMPTY.\n")) + return; + } + + /* Update statistics - currently always up-to-date. */ + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_STATS_UPDATE Event END.\n")) +} /* SkRlmtEvtStatsUpdate */ + + +/****************************************************************************** + * + * SkRlmtEvtPrefportChange - PREFPORT_CHANGE + * + * Description: + * This routine handles PREFPORT_CHANGE events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtPrefportChange( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 PortIndex; SK_U32 NetNumber */ +{ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PREFPORT_CHANGE to Port %d Event BEGIN.\n", Para.Para32[0])) + + if (Para.Para32[1] >= pAC->Rlmt.NumNets) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad NetNumber %d.\n", Para.Para32[1])) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PREFPORT_CHANGE Event EMPTY.\n")) + return; + } + + /* 0xFFFFFFFF == auto-mode. */ + if (Para.Para32[0] == 0xFFFFFFFF) { + pAC->Rlmt.Net[Para.Para32[1]].PrefPort = SK_RLMT_DEF_PREF_PORT; + } + else { + if (Para.Para32[0] >= pAC->Rlmt.Net[Para.Para32[1]].NumPorts) { + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E010, SKERR_RLMT_E010_MSG); + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PREFPORT_CHANGE Event EMPTY.\n")) + return; + } + + pAC->Rlmt.Net[Para.Para32[1]].PrefPort = Para.Para32[0]; + } + + pAC->Rlmt.Net[Para.Para32[1]].Preference = Para.Para32[0]; + + if (pAC->Rlmt.Net[Para.Para32[1]].RlmtState != SK_RLMT_RS_INIT) { + SkRlmtCheckSwitch(pAC, IoC, Para.Para32[1]); + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_PREFPORT_CHANGE Event END.\n")) +} /* SkRlmtEvtPrefportChange */ + + +/****************************************************************************** + * + * SkRlmtEvtSetNets - SET_NETS + * + * Description: + * This routine handles SET_NETS events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtSetNets( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NumNets; SK_U32 -1 */ +{ + int i; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SET_NETS Event BEGIN.\n")) + + if (Para.Para32[1] != (SK_U32)-1) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad Parameter.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SET_NETS Event EMPTY.\n")) + return; + } + + if (Para.Para32[0] == 0 || Para.Para32[0] > SK_MAX_NETS || + Para.Para32[0] > (SK_U32)pAC->GIni.GIMacsFound) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad number of nets: %d.\n", Para.Para32[0])) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SET_NETS Event EMPTY.\n")) + return; + } + + if (Para.Para32[0] == pAC->Rlmt.NumNets) { /* No change. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SET_NETS Event EMPTY.\n")) + return; + } + + /* Entering and leaving dual mode only allowed while nets are stopped. */ + if (pAC->Rlmt.NetsStarted > 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Changing dual mode only allowed while all nets are stopped.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SET_NETS Event EMPTY.\n")) + return; + } + + if (Para.Para32[0] == 1) { + if (pAC->Rlmt.NumNets > 1) { + /* Clear logical MAC addr from second net's active port. */ + (void)SkAddrOverride(pAC, IoC, pAC->Rlmt.Net[1].Port[pAC->Addr. + Net[1].ActivePort]->PortNumber, NULL, SK_ADDR_CLEAR_LOGICAL); + pAC->Rlmt.Net[1].NumPorts = 0; + } + + pAC->Rlmt.NumNets = Para.Para32[0]; + for (i = 0; (SK_U32)i < pAC->Rlmt.NumNets; i++) { + pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT; + pAC->Rlmt.Net[i].RootIdSet = SK_FALSE; + pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF; /* "Automatic" */ + pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT; + /* Just assuming. */ + pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort; + pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE; + pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL; + pAC->Rlmt.Net[i].NetNumber = i; + } + + pAC->Rlmt.Port[1].Net= &pAC->Rlmt.Net[0]; + pAC->Rlmt.Net[0].NumPorts = pAC->GIni.GIMacsFound; + + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SET_NETS, Para); + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("RLMT: Changed to one net with two ports.\n")) + } + else if (Para.Para32[0] == 2) { + pAC->Rlmt.Port[1].Net= &pAC->Rlmt.Net[1]; + pAC->Rlmt.Net[1].NumPorts = pAC->GIni.GIMacsFound - 1; + pAC->Rlmt.Net[0].NumPorts = + pAC->GIni.GIMacsFound - pAC->Rlmt.Net[1].NumPorts; + + pAC->Rlmt.NumNets = Para.Para32[0]; + for (i = 0; (SK_U32)i < pAC->Rlmt.NumNets; i++) { + pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT; + pAC->Rlmt.Net[i].RootIdSet = SK_FALSE; + pAC->Rlmt.Net[i].Preference = 0xFFFFFFFF; /* "Automatic" */ + pAC->Rlmt.Net[i].PrefPort = SK_RLMT_DEF_PREF_PORT; + /* Just assuming. */ + pAC->Rlmt.Net[i].ActivePort = pAC->Rlmt.Net[i].PrefPort; + pAC->Rlmt.Net[i].RlmtMode = SK_RLMT_DEF_MODE; + pAC->Rlmt.Net[i].TimeoutValue = SK_RLMT_DEF_TO_VAL; + + pAC->Rlmt.Net[i].NetNumber = i; + } + + /* Set logical MAC addr on second net's active port. */ + (void)SkAddrOverride(pAC, IoC, pAC->Rlmt.Net[1].Port[pAC->Addr. + Net[1].ActivePort]->PortNumber, NULL, SK_ADDR_SET_LOGICAL); + + SkEventQueue(pAC, SKGE_PNMI, SK_PNMI_EVT_RLMT_SET_NETS, Para); + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("RLMT: Changed to two nets with one port each.\n")) + } + else { + /* Not implemented for more than two nets. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SetNets not implemented for more than two nets.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SET_NETS Event EMPTY.\n")) + return; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_SET_NETS Event END.\n")) +} /* SkRlmtSetNets */ + + +/****************************************************************************** + * + * SkRlmtEvtModeChange - MODE_CHANGE + * + * Description: + * This routine handles MODE_CHANGE events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * Nothing + */ +RLMT_STATIC void SkRlmtEvtModeChange( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_EVPARA Para) /* SK_U32 NewMode; SK_U32 NetNumber */ +{ + SK_EVPARA Para2; + SK_U32 i; + SK_U32 PrevRlmtMode; + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_MODE_CHANGE Event BEGIN.\n")) + + if (Para.Para32[1] >= pAC->Rlmt.NumNets) { + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Bad NetNumber %d.\n", Para.Para32[1])) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_MODE_CHANGE Event EMPTY.\n")) + return; + } + + Para.Para32[0] |= SK_RLMT_CHECK_LINK; + + if ((pAC->Rlmt.Net[Para.Para32[1]].NumPorts == 1) && + Para.Para32[0] != SK_RLMT_MODE_CLS) { + pAC->Rlmt.Net[Para.Para32[1]].RlmtMode = SK_RLMT_MODE_CLS; + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Forced RLMT mode to CLS on single port net.\n")) + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_MODE_CHANGE Event EMPTY.\n")) + return; + } + + /* Update RLMT mode. */ + PrevRlmtMode = pAC->Rlmt.Net[Para.Para32[1]].RlmtMode; + pAC->Rlmt.Net[Para.Para32[1]].RlmtMode = Para.Para32[0]; + + if ((PrevRlmtMode & SK_RLMT_CHECK_LOC_LINK) != + (pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_LOC_LINK)) { + /* SK_RLMT_CHECK_LOC_LINK bit changed. */ + if ((PrevRlmtMode & SK_RLMT_CHECK_OTHERS) == 0 && + pAC->Rlmt.Net[Para.Para32[1]].NumPorts > 1 && + pAC->Rlmt.Net[Para.Para32[1]].PortsUp >= 1) { + /* 20001207 RA: Was "PortsUp == 1". */ + Para2.Para32[0] = Para.Para32[1]; + Para2.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[1]].LocTimer, + pAC->Rlmt.Net[Para.Para32[1]].TimeoutValue, + SKGE_RLMT, SK_RLMT_TIM, Para2); + } + } + + if ((PrevRlmtMode & SK_RLMT_CHECK_SEG) != + (pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_SEG)) { + /* SK_RLMT_CHECK_SEG bit changed. */ + for (i = 0; i < pAC->Rlmt.Net[Para.Para32[1]].NumPorts; i++) { + (void)SkAddrMcClear(pAC, IoC, + pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber, + SK_ADDR_PERMANENT | SK_MC_SW_ONLY); + + /* Add RLMT MC address. */ + (void)SkAddrMcAdd(pAC, IoC, + pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber, + &SkRlmtMcAddr, SK_ADDR_PERMANENT); + + if ((pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & + SK_RLMT_CHECK_SEG) != 0) { + /* Add BPDU MC address. */ + (void)SkAddrMcAdd(pAC, IoC, + pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber, + &BridgeMcAddr, SK_ADDR_PERMANENT); + + if (pAC->Rlmt.Net[Para.Para32[1]].RlmtState != SK_RLMT_RS_INIT) { + if (!pAC->Rlmt.Net[Para.Para32[1]].Port[i]->LinkDown && + (Para2.pParaPtr = SkRlmtBuildSpanningTreePacket( + pAC, IoC, i)) != NULL) { + pAC->Rlmt.Net[Para.Para32[1]].Port[i]->RootIdSet = + SK_FALSE; + SkEventQueue(pAC, SKGE_DRV, SK_DRV_RLMT_SEND, Para2); + } + } + } + (void)SkAddrMcUpdate(pAC, IoC, + pAC->Rlmt.Net[Para.Para32[1]].Port[i]->PortNumber); + } /* for ... */ + + if ((pAC->Rlmt.Net[Para.Para32[1]].RlmtMode & SK_RLMT_CHECK_SEG) != 0) { + Para2.Para32[0] = Para.Para32[1]; + Para2.Para32[1] = (SK_U32)-1; + SkTimerStart(pAC, IoC, &pAC->Rlmt.Net[Para.Para32[1]].SegTimer, + SK_RLMT_SEG_TO_VAL, SKGE_RLMT, SK_RLMT_SEG_TIM, Para2); + } + } /* SK_RLMT_CHECK_SEG bit changed. */ + + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("SK_RLMT_MODE_CHANGE Event END.\n")) +} /* SkRlmtEvtModeChange */ + + +/****************************************************************************** + * + * SkRlmtEvent - a PORT- or an RLMT-specific event happened + * + * Description: + * This routine calls subroutines to handle PORT- and RLMT-specific events. + * + * Context: + * runtime, pageable? + * may be called after SK_INIT_IO + * + * Returns: + * 0 + */ +int SkRlmtEvent( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +SK_U32 Event, /* Event code */ +SK_EVPARA Para) /* Event-specific parameter */ +{ + switch (Event) { + + /* ----- PORT events ----- */ + + case SK_RLMT_PORTSTART_TIM: /* From RLMT via TIME. */ + SkRlmtEvtPortStartTim(pAC, IoC, Para); + break; + case SK_RLMT_LINK_UP: /* From SIRQ. */ + SkRlmtEvtLinkUp(pAC, IoC, Para); + break; + case SK_RLMT_PORTUP_TIM: /* From RLMT via TIME. */ + SkRlmtEvtPortUpTim(pAC, IoC, Para); + break; + case SK_RLMT_PORTDOWN: /* From RLMT. */ + case SK_RLMT_PORTDOWN_RX_TIM: /* From RLMT via TIME. */ + case SK_RLMT_PORTDOWN_TX_TIM: /* From RLMT via TIME. */ + SkRlmtEvtPortDownX(pAC, IoC, Event, Para); + break; + case SK_RLMT_LINK_DOWN: /* From SIRQ. */ + SkRlmtEvtLinkDown(pAC, IoC, Para); + break; + case SK_RLMT_PORT_ADDR: /* From ADDR. */ + SkRlmtEvtPortAddr(pAC, IoC, Para); + break; + + /* ----- RLMT events ----- */ + + case SK_RLMT_START: /* From DRV. */ + SkRlmtEvtStart(pAC, IoC, Para); + break; + case SK_RLMT_STOP: /* From DRV. */ + SkRlmtEvtStop(pAC, IoC, Para); + break; + case SK_RLMT_TIM: /* From RLMT via TIME. */ + SkRlmtEvtTim(pAC, IoC, Para); + break; + case SK_RLMT_SEG_TIM: + SkRlmtEvtSegTim(pAC, IoC, Para); + break; + case SK_RLMT_PACKET_RECEIVED: /* From DRV. */ + SkRlmtEvtPacketRx(pAC, IoC, Para); + break; + case SK_RLMT_STATS_CLEAR: /* From PNMI. */ + SkRlmtEvtStatsClear(pAC, IoC, Para); + break; + case SK_RLMT_STATS_UPDATE: /* From PNMI. */ + SkRlmtEvtStatsUpdate(pAC, IoC, Para); + break; + case SK_RLMT_PREFPORT_CHANGE: /* From PNMI. */ + SkRlmtEvtPrefportChange(pAC, IoC, Para); + break; + case SK_RLMT_MODE_CHANGE: /* From PNMI. */ + SkRlmtEvtModeChange(pAC, IoC, Para); + break; + case SK_RLMT_SET_NETS: /* From DRV. */ + SkRlmtEvtSetNets(pAC, IoC, Para); + break; + + /* ----- Unknown events ----- */ + + default: /* Create error log entry. */ + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, + ("Unknown RLMT Event %d.\n", Event)) + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_RLMT_E003, SKERR_RLMT_E003_MSG); + break; + } /* switch() */ + + return (0); +} /* SkRlmtEvent */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ diff --git a/drivers/net/sk98lin/sktimer.c b/drivers/net/sk98lin/sktimer.c new file mode 100644 index 00000000000..4e462955ecd --- /dev/null +++ b/drivers/net/sk98lin/sktimer.c @@ -0,0 +1,250 @@ +/****************************************************************************** + * + * Name: sktimer.c + * Project: Gigabit Ethernet Adapters, Event Scheduler Module + * Version: $Revision: 1.14 $ + * Date: $Date: 2003/09/16 13:46:51 $ + * Purpose: High level timer functions. + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + + +/* + * Event queue and dispatcher + */ +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: sktimer.c,v 1.14 2003/09/16 13:46:51 rschmidt Exp $ (C) Marvell."; +#endif + +#include "h/skdrv1st.h" /* Driver Specific Definitions */ +#include "h/skdrv2nd.h" /* Adapter Control- and Driver specific Def. */ + +#ifdef __C2MAN__ +/* + Event queue management. + + General Description: + + */ +intro() +{} +#endif + + +/* Forward declaration */ +static void timer_done(SK_AC *pAC,SK_IOC Ioc,int Restart); + + +/* + * Inits the software timer + * + * needs to be called during Init level 1. + */ +void SkTimerInit( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc, /* IoContext */ +int Level) /* Init Level */ +{ + switch (Level) { + case SK_INIT_DATA: + pAC->Tim.StQueue = NULL; + break; + case SK_INIT_IO: + SkHwtInit(pAC, Ioc); + SkTimerDone(pAC, Ioc); + break; + default: + break; + } +} + +/* + * Stops a high level timer + * - If a timer is not in the queue the function returns normally, too. + */ +void SkTimerStop( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc, /* IoContext */ +SK_TIMER *pTimer) /* Timer Pointer to be started */ +{ + SK_TIMER **ppTimPrev; + SK_TIMER *pTm; + + /* + * remove timer from queue + */ + pTimer->TmActive = SK_FALSE; + + if (pAC->Tim.StQueue == pTimer && !pTimer->TmNext) { + SkHwtStop(pAC, Ioc); + } + + for (ppTimPrev = &pAC->Tim.StQueue; (pTm = *ppTimPrev); + ppTimPrev = &pTm->TmNext ) { + + if (pTm == pTimer) { + /* + * Timer found in queue + * - dequeue it and + * - correct delta of the next timer + */ + *ppTimPrev = pTm->TmNext; + + if (pTm->TmNext) { + /* correct delta of next timer in queue */ + pTm->TmNext->TmDelta += pTm->TmDelta; + } + return; + } + } +} + +/* + * Start a high level software timer + */ +void SkTimerStart( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc, /* IoContext */ +SK_TIMER *pTimer, /* Timer Pointer to be started */ +SK_U32 Time, /* Time value */ +SK_U32 Class, /* Event Class for this timer */ +SK_U32 Event, /* Event Value for this timer */ +SK_EVPARA Para) /* Event Parameter for this timer */ +{ + SK_TIMER **ppTimPrev; + SK_TIMER *pTm; + SK_U32 Delta; + + Time /= 16; /* input is uS, clock ticks are 16uS */ + + if (!Time) + Time = 1; + + SkTimerStop(pAC, Ioc, pTimer); + + pTimer->TmClass = Class; + pTimer->TmEvent = Event; + pTimer->TmPara = Para; + pTimer->TmActive = SK_TRUE; + + if (!pAC->Tim.StQueue) { + /* First Timer to be started */ + pAC->Tim.StQueue = pTimer; + pTimer->TmNext = NULL; + pTimer->TmDelta = Time; + + SkHwtStart(pAC, Ioc, Time); + + return; + } + + /* + * timer correction + */ + timer_done(pAC, Ioc, 0); + + /* + * find position in queue + */ + Delta = 0; + for (ppTimPrev = &pAC->Tim.StQueue; (pTm = *ppTimPrev); + ppTimPrev = &pTm->TmNext ) { + + if (Delta + pTm->TmDelta > Time) { + /* Position found */ + /* Here the timer needs to be inserted. */ + break; + } + Delta += pTm->TmDelta; + } + + /* insert in queue */ + *ppTimPrev = pTimer; + pTimer->TmNext = pTm; + pTimer->TmDelta = Time - Delta; + + if (pTm) { + /* There is a next timer + * -> correct its Delta value. + */ + pTm->TmDelta -= pTimer->TmDelta; + } + + /* restart with first */ + SkHwtStart(pAC, Ioc, pAC->Tim.StQueue->TmDelta); +} + + +void SkTimerDone( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc) /* IoContext */ +{ + timer_done(pAC, Ioc, 1); +} + + +static void timer_done( +SK_AC *pAC, /* Adapters context */ +SK_IOC Ioc, /* IoContext */ +int Restart) /* Do we need to restart the Hardware timer ? */ +{ + SK_U32 Delta; + SK_TIMER *pTm; + SK_TIMER *pTComp; /* Timer completed now now */ + SK_TIMER **ppLast; /* Next field of Last timer to be deq */ + int Done = 0; + + Delta = SkHwtRead(pAC, Ioc); + + ppLast = &pAC->Tim.StQueue; + pTm = pAC->Tim.StQueue; + while (pTm && !Done) { + if (Delta >= pTm->TmDelta) { + /* Timer ran out */ + pTm->TmActive = SK_FALSE; + Delta -= pTm->TmDelta; + ppLast = &pTm->TmNext; + pTm = pTm->TmNext; + } + else { + /* We found the first timer that did not run out */ + pTm->TmDelta -= Delta; + Delta = 0; + Done = 1; + } + } + *ppLast = NULL; + /* + * pTm points to the first Timer that did not run out. + * StQueue points to the first Timer that run out. + */ + + for ( pTComp = pAC->Tim.StQueue; pTComp; pTComp = pTComp->TmNext) { + SkEventQueue(pAC,pTComp->TmClass, pTComp->TmEvent, pTComp->TmPara); + } + + /* Set head of timer queue to the first timer that did not run out */ + pAC->Tim.StQueue = pTm; + + if (Restart && pAC->Tim.StQueue) { + /* Restart HW timer */ + SkHwtStart(pAC, Ioc, pAC->Tim.StQueue->TmDelta); + } +} + +/* End of file */ diff --git a/drivers/net/sk98lin/skvpd.c b/drivers/net/sk98lin/skvpd.c new file mode 100644 index 00000000000..1e662aaebf8 --- /dev/null +++ b/drivers/net/sk98lin/skvpd.c @@ -0,0 +1,1091 @@ +/****************************************************************************** + * + * Name: skvpd.c + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.37 $ + * Date: $Date: 2003/01/13 10:42:45 $ + * Purpose: Shared software to read and write VPD data + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2003 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/* + Please refer skvpd.txt for information how to include this module + */ +static const char SysKonnectFileId[] = + "@(#)$Id: skvpd.c,v 1.37 2003/01/13 10:42:45 rschmidt Exp $ (C) SK"; + +#include "h/skdrv1st.h" +#include "h/sktypes.h" +#include "h/skdebug.h" +#include "h/skdrv2nd.h" + +/* + * Static functions + */ +#ifndef SK_KR_PROTO +static SK_VPD_PARA *vpd_find_para( + SK_AC *pAC, + const char *key, + SK_VPD_PARA *p); +#else /* SK_KR_PROTO */ +static SK_VPD_PARA *vpd_find_para(); +#endif /* SK_KR_PROTO */ + +/* + * waits for a completion of a VPD transfer + * The VPD transfer must complete within SK_TICKS_PER_SEC/16 + * + * returns 0: success, transfer completes + * error exit(9) with a error message + */ +static int VpdWait( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC, /* IO Context */ +int event) /* event to wait for (VPD_READ / VPD_write) completion*/ +{ + SK_U64 start_time; + SK_U16 state; + + SK_DBG_MSG(pAC,SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("VPD wait for %s\n", event?"Write":"Read")); + start_time = SkOsGetTime(pAC); + do { + if (SkOsGetTime(pAC) - start_time > SK_TICKS_PER_SEC) { + + /* Bug fix AF: Thu Mar 28 2002 + * Do not call: VPD_STOP(pAC, IoC); + * A pending VPD read cycle can not be aborted by writing + * VPD_WRITE to the PCI_VPD_ADR_REG (VPD address register). + * Although the write threshold in the OUR-register protects + * VPD read only space from being overwritten this does not + * protect a VPD read from being `converted` into a VPD write + * operation (on the fly). As a consequence the VPD_STOP would + * delete VPD read only data. In case of any problems with the + * I2C bus we exit the loop here. The I2C read operation can + * not be aborted except by a reset (->LR). + */ + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_FATAL | SK_DBGCAT_ERR, + ("ERROR:VPD wait timeout\n")); + return(1); + } + + VPD_IN16(pAC, IoC, PCI_VPD_ADR_REG, &state); + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("state = %x, event %x\n",state,event)); + } while((int)(state & PCI_VPD_FLAG) == event); + + return(0); +} + +#ifdef SKDIAG + +/* + * Read the dword at address 'addr' from the VPD EEPROM. + * + * Needed Time: MIN 1,3 ms MAX 2,6 ms + * + * Note: The DWord is returned in the endianess of the machine the routine + * is running on. + * + * Returns the data read. + */ +SK_U32 VpdReadDWord( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC, /* IO Context */ +int addr) /* VPD address */ +{ + SK_U32 Rtv; + + /* start VPD read */ + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("VPD read dword at 0x%x\n",addr)); + addr &= ~VPD_WRITE; /* ensure the R/W bit is set to read */ + + VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, (SK_U16)addr); + + /* ignore return code here */ + (void)VpdWait(pAC, IoC, VPD_READ); + + /* Don't swap here, it's a data stream of bytes */ + Rtv = 0; + + VPD_IN32(pAC, IoC, PCI_VPD_DAT_REG, &Rtv); + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("VPD read dword data = 0x%x\n",Rtv)); + return(Rtv); +} + +#endif /* SKDIAG */ + +/* + * Read one Stream of 'len' bytes of VPD data, starting at 'addr' from + * or to the I2C EEPROM. + * + * Returns number of bytes read / written. + */ +static int VpdWriteStream( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC, /* IO Context */ +char *buf, /* data buffer */ +int Addr, /* VPD start address */ +int Len) /* number of bytes to read / to write */ +{ + int i; + int j; + SK_U16 AdrReg; + int Rtv; + SK_U8 * pComp; /* Compare pointer */ + SK_U8 Data; /* Input Data for Compare */ + + /* Init Compare Pointer */ + pComp = (SK_U8 *) buf; + + for (i = 0; i < Len; i++, buf++) { + if ((i%sizeof(SK_U32)) == 0) { + /* + * At the begin of each cycle read the Data Reg + * So it is initialized even if only a few bytes + * are written. + */ + AdrReg = (SK_U16) Addr; + AdrReg &= ~VPD_WRITE; /* READ operation */ + + VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg); + + /* Wait for termination */ + Rtv = VpdWait(pAC, IoC, VPD_READ); + if (Rtv != 0) { + return(i); + } + } + + /* Write current Byte */ + VPD_OUT8(pAC, IoC, PCI_VPD_DAT_REG + (i%sizeof(SK_U32)), + *(SK_U8*)buf); + + if (((i%sizeof(SK_U32)) == 3) || (i == (Len - 1))) { + /* New Address needs to be written to VPD_ADDR reg */ + AdrReg = (SK_U16) Addr; + Addr += sizeof(SK_U32); + AdrReg |= VPD_WRITE; /* WRITE operation */ + + VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg); + + /* Wait for termination */ + Rtv = VpdWait(pAC, IoC, VPD_WRITE); + if (Rtv != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("Write Timed Out\n")); + return(i - (i%sizeof(SK_U32))); + } + + /* + * Now re-read to verify + */ + AdrReg &= ~VPD_WRITE; /* READ operation */ + + VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg); + + /* Wait for termination */ + Rtv = VpdWait(pAC, IoC, VPD_READ); + if (Rtv != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("Verify Timed Out\n")); + return(i - (i%sizeof(SK_U32))); + } + + for (j = 0; j <= (int)(i%sizeof(SK_U32)); j++, pComp++) { + + VPD_IN8(pAC, IoC, PCI_VPD_DAT_REG + j, &Data); + + if (Data != *pComp) { + /* Verify Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("WriteStream Verify Error\n")); + return(i - (i%sizeof(SK_U32)) + j); + } + } + } + } + + return(Len); +} + + +/* + * Read one Stream of 'len' bytes of VPD data, starting at 'addr' from + * or to the I2C EEPROM. + * + * Returns number of bytes read / written. + */ +static int VpdReadStream( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC, /* IO Context */ +char *buf, /* data buffer */ +int Addr, /* VPD start address */ +int Len) /* number of bytes to read / to write */ +{ + int i; + SK_U16 AdrReg; + int Rtv; + + for (i = 0; i < Len; i++, buf++) { + if ((i%sizeof(SK_U32)) == 0) { + /* New Address needs to be written to VPD_ADDR reg */ + AdrReg = (SK_U16) Addr; + Addr += sizeof(SK_U32); + AdrReg &= ~VPD_WRITE; /* READ operation */ + + VPD_OUT16(pAC, IoC, PCI_VPD_ADR_REG, AdrReg); + + /* Wait for termination */ + Rtv = VpdWait(pAC, IoC, VPD_READ); + if (Rtv != 0) { + return(i); + } + } + VPD_IN8(pAC, IoC, PCI_VPD_DAT_REG + (i%sizeof(SK_U32)), + (SK_U8 *)buf); + } + + return(Len); +} + +/* + * Read ore writes 'len' bytes of VPD data, starting at 'addr' from + * or to the I2C EEPROM. + * + * Returns number of bytes read / written. + */ +static int VpdTransferBlock( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC, /* IO Context */ +char *buf, /* data buffer */ +int addr, /* VPD start address */ +int len, /* number of bytes to read / to write */ +int dir) /* transfer direction may be VPD_READ or VPD_WRITE */ +{ + int Rtv; /* Return value */ + int vpd_rom_size; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("VPD %s block, addr = 0x%x, len = %d\n", + dir ? "write" : "read", addr, len)); + + if (len == 0) + return(0); + + vpd_rom_size = pAC->vpd.rom_size; + + if (addr > vpd_rom_size - 4) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Address error: 0x%x, exp. < 0x%x\n", + addr, vpd_rom_size - 4)); + return(0); + } + + if (addr + len > vpd_rom_size) { + len = vpd_rom_size - addr; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("Warning: len was cut to %d\n", len)); + } + + if (dir == VPD_READ) { + Rtv = VpdReadStream(pAC, IoC, buf, addr, len); + } + else { + Rtv = VpdWriteStream(pAC, IoC, buf, addr, len); + } + + return(Rtv); +} + +#ifdef SKDIAG + +/* + * Read 'len' bytes of VPD data, starting at 'addr'. + * + * Returns number of bytes read. + */ +int VpdReadBlock( +SK_AC *pAC, /* pAC pointer */ +SK_IOC IoC, /* IO Context */ +char *buf, /* buffer were the data should be stored */ +int addr, /* start reading at the VPD address */ +int len) /* number of bytes to read */ +{ + return(VpdTransferBlock(pAC, IoC, buf, addr, len, VPD_READ)); +} + +/* + * Write 'len' bytes of *but to the VPD EEPROM, starting at 'addr'. + * + * Returns number of bytes writes. + */ +int VpdWriteBlock( +SK_AC *pAC, /* pAC pointer */ +SK_IOC IoC, /* IO Context */ +char *buf, /* buffer, holds the data to write */ +int addr, /* start writing at the VPD address */ +int len) /* number of bytes to write */ +{ + return(VpdTransferBlock(pAC, IoC, buf, addr, len, VPD_WRITE)); +} +#endif /* SKDIAG */ + +/* + * (re)initialize the VPD buffer + * + * Reads the VPD data from the EEPROM into the VPD buffer. + * Get the remaining read only and read / write space. + * + * return 0: success + * 1: fatal VPD error + */ +static int VpdInit( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC) /* IO Context */ +{ + SK_VPD_PARA *r, rp; /* RW or RV */ + int i; + unsigned char x; + int vpd_size; + SK_U16 dev_id; + SK_U32 our_reg2; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_INIT, ("VpdInit .. ")); + + VPD_IN16(pAC, IoC, PCI_DEVICE_ID, &dev_id); + + VPD_IN32(pAC, IoC, PCI_OUR_REG_2, &our_reg2); + + pAC->vpd.rom_size = 256 << ((our_reg2 & PCI_VPD_ROM_SZ) >> 14); + + /* + * this function might get used before the hardware is initialized + * therefore we cannot always trust in GIChipId + */ + if (((pAC->vpd.v.vpd_status & VPD_VALID) == 0 && + dev_id != VPD_DEV_ID_GENESIS) || + ((pAC->vpd.v.vpd_status & VPD_VALID) != 0 && + !pAC->GIni.GIGenesis)) { + + /* for Yukon the VPD size is always 256 */ + vpd_size = VPD_SIZE_YUKON; + } + else { + /* Genesis uses the maximum ROM size up to 512 for VPD */ + if (pAC->vpd.rom_size > VPD_SIZE_GENESIS) { + vpd_size = VPD_SIZE_GENESIS; + } + else { + vpd_size = pAC->vpd.rom_size; + } + } + + /* read the VPD data into the VPD buffer */ + if (VpdTransferBlock(pAC, IoC, pAC->vpd.vpd_buf, 0, vpd_size, VPD_READ) + != vpd_size) { + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("Block Read Error\n")); + return(1); + } + + pAC->vpd.vpd_size = vpd_size; + + /* Asus K8V Se Deluxe bugfix. Correct VPD content */ + /* MBo April 2004 */ + if (((unsigned char)pAC->vpd.vpd_buf[0x3f] == 0x38) && + ((unsigned char)pAC->vpd.vpd_buf[0x40] == 0x3c) && + ((unsigned char)pAC->vpd.vpd_buf[0x41] == 0x45)) { + printk("sk98lin: Asus mainboard with buggy VPD? " + "Correcting data.\n"); + pAC->vpd.vpd_buf[0x40] = 0x38; + } + + + /* find the end tag of the RO area */ + if (!(r = vpd_find_para(pAC, VPD_RV, &rp))) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Encoding Error: RV Tag not found\n")); + return(1); + } + + if (r->p_val + r->p_len > pAC->vpd.vpd_buf + vpd_size/2) { + SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Encoding Error: Invalid VPD struct size\n")); + return(1); + } + pAC->vpd.v.vpd_free_ro = r->p_len - 1; + + /* test the checksum */ + for (i = 0, x = 0; (unsigned)i <= (unsigned)vpd_size/2 - r->p_len; i++) { + x += pAC->vpd.vpd_buf[i]; + } + + if (x != 0) { + /* checksum error */ + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("VPD Checksum Error\n")); + return(1); + } + + /* find and check the end tag of the RW area */ + if (!(r = vpd_find_para(pAC, VPD_RW, &rp))) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Encoding Error: RV Tag not found\n")); + return(1); + } + + if (r->p_val < pAC->vpd.vpd_buf + vpd_size/2) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Encoding Error: Invalid VPD struct size\n")); + return(1); + } + pAC->vpd.v.vpd_free_rw = r->p_len; + + /* everything seems to be ok */ + if (pAC->GIni.GIChipId != 0) { + pAC->vpd.v.vpd_status |= VPD_VALID; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_INIT, + ("done. Free RO = %d, Free RW = %d\n", + pAC->vpd.v.vpd_free_ro, pAC->vpd.v.vpd_free_rw)); + + return(0); +} + +/* + * find the Keyword 'key' in the VPD buffer and fills the + * parameter struct 'p' with it's values + * + * returns *p success + * 0: parameter was not found or VPD encoding error + */ +static SK_VPD_PARA *vpd_find_para( +SK_AC *pAC, /* common data base */ +const char *key, /* keyword to find (e.g. "MN") */ +SK_VPD_PARA *p) /* parameter description struct */ +{ + char *v ; /* points to VPD buffer */ + int max; /* Maximum Number of Iterations */ + + v = pAC->vpd.vpd_buf; + max = 128; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("VPD find para %s .. ",key)); + + /* check mandatory resource type ID string (Product Name) */ + if (*v != (char)RES_ID) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Error: 0x%x missing\n", RES_ID)); + return NULL; + } + + if (strcmp(key, VPD_NAME) == 0) { + p->p_len = VPD_GET_RES_LEN(v); + p->p_val = VPD_GET_VAL(v); + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("found, len = %d\n", p->p_len)); + return(p); + } + + v += 3 + VPD_GET_RES_LEN(v) + 3; + for (;; ) { + if (SK_MEMCMP(key,v,2) == 0) { + p->p_len = VPD_GET_VPD_LEN(v); + p->p_val = VPD_GET_VAL(v); + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("found, len = %d\n",p->p_len)); + return(p); + } + + /* exit when reaching the "RW" Tag or the maximum of itera. */ + max--; + if (SK_MEMCMP(VPD_RW,v,2) == 0 || max == 0) { + break; + } + + if (SK_MEMCMP(VPD_RV,v,2) == 0) { + v += 3 + VPD_GET_VPD_LEN(v) + 3; /* skip VPD-W */ + } + else { + v += 3 + VPD_GET_VPD_LEN(v); + } + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("scanning '%c%c' len = %d\n",v[0],v[1],v[2])); + } + +#ifdef DEBUG + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, ("not found\n")); + if (max == 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Key/Len Encoding error\n")); + } +#endif /* DEBUG */ + return NULL; +} + +/* + * Move 'n' bytes. Begin with the last byte if 'n' is > 0, + * Start with the last byte if n is < 0. + * + * returns nothing + */ +static void vpd_move_para( +char *start, /* start of memory block */ +char *end, /* end of memory block to move */ +int n) /* number of bytes the memory block has to be moved */ +{ + char *p; + int i; /* number of byte copied */ + + if (n == 0) + return; + + i = (int) (end - start + 1); + if (n < 0) { + p = start + n; + while (i != 0) { + *p++ = *start++; + i--; + } + } + else { + p = end + n; + while (i != 0) { + *p-- = *end--; + i--; + } + } +} + +/* + * setup the VPD keyword 'key' at 'ip'. + * + * returns nothing + */ +static void vpd_insert_key( +const char *key, /* keyword to insert */ +const char *buf, /* buffer with the keyword value */ +int len, /* length of the value string */ +char *ip) /* inseration point */ +{ + SK_VPD_KEY *p; + + p = (SK_VPD_KEY *) ip; + p->p_key[0] = key[0]; + p->p_key[1] = key[1]; + p->p_len = (unsigned char) len; + SK_MEMCPY(&p->p_val,buf,len); +} + +/* + * Setup the VPD end tag "RV" / "RW". + * Also correct the remaining space variables vpd_free_ro / vpd_free_rw. + * + * returns 0: success + * 1: encoding error + */ +static int vpd_mod_endtag( +SK_AC *pAC, /* common data base */ +char *etp) /* end pointer input position */ +{ + SK_VPD_KEY *p; + unsigned char x; + int i; + int vpd_size; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("VPD modify endtag at 0x%x = '%c%c'\n",etp,etp[0],etp[1])); + + vpd_size = pAC->vpd.vpd_size; + + p = (SK_VPD_KEY *) etp; + + if (p->p_key[0] != 'R' || (p->p_key[1] != 'V' && p->p_key[1] != 'W')) { + /* something wrong here, encoding error */ + SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR | SK_DBGCAT_FATAL, + ("Encoding Error: invalid end tag\n")); + return(1); + } + if (etp > pAC->vpd.vpd_buf + vpd_size/2) { + /* create "RW" tag */ + p->p_len = (unsigned char)(pAC->vpd.vpd_buf+vpd_size-etp-3-1); + pAC->vpd.v.vpd_free_rw = (int) p->p_len; + i = pAC->vpd.v.vpd_free_rw; + etp += 3; + } + else { + /* create "RV" tag */ + p->p_len = (unsigned char)(pAC->vpd.vpd_buf+vpd_size/2-etp-3); + pAC->vpd.v.vpd_free_ro = (int) p->p_len - 1; + + /* setup checksum */ + for (i = 0, x = 0; i < vpd_size/2 - p->p_len; i++) { + x += pAC->vpd.vpd_buf[i]; + } + p->p_val = (char) 0 - x; + i = pAC->vpd.v.vpd_free_ro; + etp += 4; + } + while (i) { + *etp++ = 0x00; + i--; + } + + return(0); +} + +/* + * Insert a VPD keyword into the VPD buffer. + * + * The keyword 'key' is inserted at the position 'ip' in the + * VPD buffer. + * The keywords behind the input position will + * be moved. The VPD end tag "RV" or "RW" is generated again. + * + * returns 0: success + * 2: value string was cut + * 4: VPD full, keyword was not written + * 6: fatal VPD error + * + */ +static int VpdSetupPara( +SK_AC *pAC, /* common data base */ +const char *key, /* keyword to insert */ +const char *buf, /* buffer with the keyword value */ +int len, /* length of the keyword value */ +int type, /* VPD_RO_KEY or VPD_RW_KEY */ +int op) /* operation to do: ADD_KEY or OWR_KEY */ +{ + SK_VPD_PARA vp; + char *etp; /* end tag position */ + int free; /* remaining space in selected area */ + char *ip; /* input position inside the VPD buffer */ + int rtv; /* return code */ + int head; /* additional haeder bytes to move */ + int found; /* additinoal bytes if the keyword was found */ + int vpd_size; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("VPD setup para key = %s, val = %s\n",key,buf)); + + vpd_size = pAC->vpd.vpd_size; + + rtv = 0; + ip = NULL; + if (type == VPD_RW_KEY) { + /* end tag is "RW" */ + free = pAC->vpd.v.vpd_free_rw; + etp = pAC->vpd.vpd_buf + (vpd_size - free - 1 - 3); + } + else { + /* end tag is "RV" */ + free = pAC->vpd.v.vpd_free_ro; + etp = pAC->vpd.vpd_buf + (vpd_size/2 - free - 4); + } + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("Free RO = %d, Free RW = %d\n", + pAC->vpd.v.vpd_free_ro, pAC->vpd.v.vpd_free_rw)); + + head = 0; + found = 0; + if (op == OWR_KEY) { + if (vpd_find_para(pAC, key, &vp)) { + found = 3; + ip = vp.p_val - 3; + free += vp.p_len + 3; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("Overwrite Key\n")); + } + else { + op = ADD_KEY; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, + ("Add Key\n")); + } + } + if (op == ADD_KEY) { + ip = etp; + vp.p_len = 0; + head = 3; + } + + if (len + 3 > free) { + if (free < 7) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD Buffer Overflow, keyword not written\n")); + return(4); + } + /* cut it again */ + len = free - 3; + rtv = 2; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD Buffer Full, Keyword was cut\n")); + } + + vpd_move_para(ip + vp.p_len + found, etp+2, len-vp.p_len+head); + vpd_insert_key(key, buf, len, ip); + if (vpd_mod_endtag(pAC, etp + len - vp.p_len + head)) { + pAC->vpd.v.vpd_status &= ~VPD_VALID; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD Encoding Error\n")); + return(6); + } + + return(rtv); +} + + +/* + * Read the contents of the VPD EEPROM and copy it to the + * VPD buffer if not already done. + * + * return: A pointer to the vpd_status structure. The structure contains + * this fields. + */ +SK_VPD_STATUS *VpdStat( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC) /* IO Context */ +{ + if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) { + (void)VpdInit(pAC, IoC); + } + return(&pAC->vpd.v); +} + + +/* + * Read the contents of the VPD EEPROM and copy it to the VPD + * buffer if not already done. + * Scan the VPD buffer for VPD keywords and create the VPD + * keyword list by copying the keywords to 'buf', all after + * each other and terminated with a '\0'. + * + * Exceptions: o The Resource Type ID String (product name) is called "Name" + * o The VPD end tags 'RV' and 'RW' are not listed + * + * The number of copied keywords is counted in 'elements'. + * + * returns 0: success + * 2: buffer overfull, one or more keywords are missing + * 6: fatal VPD error + * + * example values after returning: + * + * buf = "Name\0PN\0EC\0MN\0SN\0CP\0VF\0VL\0YA\0" + * *len = 30 + * *elements = 9 + */ +int VpdKeys( +SK_AC *pAC, /* common data base */ +SK_IOC IoC, /* IO Context */ +char *buf, /* buffer where to copy the keywords */ +int *len, /* buffer length */ +int *elements) /* number of keywords returned */ +{ + char *v; + int n; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("list VPD keys .. ")); + *elements = 0; + if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) { + if (VpdInit(pAC, IoC) != 0) { + *len = 0; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD Init Error, terminated\n")); + return(6); + } + } + + if ((signed)strlen(VPD_NAME) + 1 <= *len) { + v = pAC->vpd.vpd_buf; + strcpy(buf,VPD_NAME); + n = strlen(VPD_NAME) + 1; + buf += n; + *elements = 1; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, + ("'%c%c' ",v[0],v[1])); + } + else { + *len = 0; + SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR, + ("buffer overflow\n")); + return(2); + } + + v += 3 + VPD_GET_RES_LEN(v) + 3; + for (;; ) { + /* exit when reaching the "RW" Tag */ + if (SK_MEMCMP(VPD_RW,v,2) == 0) { + break; + } + + if (SK_MEMCMP(VPD_RV,v,2) == 0) { + v += 3 + VPD_GET_VPD_LEN(v) + 3; /* skip VPD-W */ + continue; + } + + if (n+3 <= *len) { + SK_MEMCPY(buf,v,2); + buf += 2; + *buf++ = '\0'; + n += 3; + v += 3 + VPD_GET_VPD_LEN(v); + *elements += 1; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, + ("'%c%c' ",v[0],v[1])); + } + else { + *len = n; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("buffer overflow\n")); + return(2); + } + } + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("\n")); + *len = n; + return(0); +} + + +/* + * Read the contents of the VPD EEPROM and copy it to the + * VPD buffer if not already done. Search for the VPD keyword + * 'key' and copy its value to 'buf'. Add a terminating '\0'. + * If the value does not fit into the buffer cut it after + * 'len' - 1 bytes. + * + * returns 0: success + * 1: keyword not found + * 2: value string was cut + * 3: VPD transfer timeout + * 6: fatal VPD error + */ +int VpdRead( +SK_AC *pAC, /* common data base */ +SK_IOC IoC, /* IO Context */ +const char *key, /* keyword to read (e.g. "MN") */ +char *buf, /* buffer where to copy the keyword value */ +int *len) /* buffer length */ +{ + SK_VPD_PARA *p, vp; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, ("VPD read %s .. ", key)); + if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) { + if (VpdInit(pAC, IoC) != 0) { + *len = 0; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD init error\n")); + return(6); + } + } + + if ((p = vpd_find_para(pAC, key, &vp)) != NULL) { + if (p->p_len > (*(unsigned *)len)-1) { + p->p_len = *len - 1; + } + SK_MEMCPY(buf, p->p_val, p->p_len); + buf[p->p_len] = '\0'; + *len = p->p_len; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_RX, + ("%c%c%c%c.., len = %d\n", + buf[0],buf[1],buf[2],buf[3],*len)); + } + else { + *len = 0; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, ("not found\n")); + return(1); + } + return(0); +} + + +/* + * Check whether a given key may be written + * + * returns + * SK_TRUE Yes it may be written + * SK_FALSE No it may be written + */ +SK_BOOL VpdMayWrite( +char *key) /* keyword to write (allowed values "Yx", "Vx") */ +{ + if ((*key != 'Y' && *key != 'V') || + key[1] < '0' || key[1] > 'Z' || + (key[1] > '9' && key[1] < 'A') || strlen(key) != 2) { + + return(SK_FALSE); + } + return(SK_TRUE); +} + +/* + * Read the contents of the VPD EEPROM and copy it to the VPD + * buffer if not already done. Insert/overwrite the keyword 'key' + * in the VPD buffer. Cut the keyword value if it does not fit + * into the VPD read / write area. + * + * returns 0: success + * 2: value string was cut + * 3: VPD transfer timeout + * 4: VPD full, keyword was not written + * 5: keyword cannot be written + * 6: fatal VPD error + */ +int VpdWrite( +SK_AC *pAC, /* common data base */ +SK_IOC IoC, /* IO Context */ +const char *key, /* keyword to write (allowed values "Yx", "Vx") */ +const char *buf) /* buffer where the keyword value can be read from */ +{ + int len; /* length of the keyword to write */ + int rtv; /* return code */ + int rtv2; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, + ("VPD write %s = %s\n",key,buf)); + + if ((*key != 'Y' && *key != 'V') || + key[1] < '0' || key[1] > 'Z' || + (key[1] > '9' && key[1] < 'A') || strlen(key) != 2) { + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("illegal key tag, keyword not written\n")); + return(5); + } + + if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) { + if (VpdInit(pAC, IoC) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD init error\n")); + return(6); + } + } + + rtv = 0; + len = strlen(buf); + if (len > VPD_MAX_LEN) { + /* cut it */ + len = VPD_MAX_LEN; + rtv = 2; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("keyword too long, cut after %d bytes\n",VPD_MAX_LEN)); + } + if ((rtv2 = VpdSetupPara(pAC, key, buf, len, VPD_RW_KEY, OWR_KEY)) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD write error\n")); + return(rtv2); + } + + return(rtv); +} + +/* + * Read the contents of the VPD EEPROM and copy it to the + * VPD buffer if not already done. Remove the VPD keyword + * 'key' from the VPD buffer. + * Only the keywords in the read/write area can be deleted. + * Keywords in the read only area cannot be deleted. + * + * returns 0: success, keyword was removed + * 1: keyword not found + * 5: keyword cannot be deleted + * 6: fatal VPD error + */ +int VpdDelete( +SK_AC *pAC, /* common data base */ +SK_IOC IoC, /* IO Context */ +char *key) /* keyword to read (e.g. "MN") */ +{ + SK_VPD_PARA *p, vp; + char *etp; + int vpd_size; + + vpd_size = pAC->vpd.vpd_size; + + SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_TX,("VPD delete key %s\n",key)); + if ((pAC->vpd.v.vpd_status & VPD_VALID) == 0) { + if (VpdInit(pAC, IoC) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD init error\n")); + return(6); + } + } + + if ((p = vpd_find_para(pAC, key, &vp)) != NULL) { + if (p->p_val < pAC->vpd.vpd_buf + vpd_size/2) { + /* try to delete read only keyword */ + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("cannot delete RO keyword\n")); + return(5); + } + + etp = pAC->vpd.vpd_buf + (vpd_size-pAC->vpd.v.vpd_free_rw-1-3); + + vpd_move_para(vp.p_val+vp.p_len, etp+2, + - ((int)(vp.p_len + 3))); + if (vpd_mod_endtag(pAC, etp - vp.p_len - 3)) { + pAC->vpd.v.vpd_status &= ~VPD_VALID; + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("VPD encoding error\n")); + return(6); + } + } + else { + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("keyword not found\n")); + return(1); + } + + return(0); +} + +/* + * If the VPD buffer contains valid data write the VPD + * read/write area back to the VPD EEPROM. + * + * returns 0: success + * 3: VPD transfer timeout + */ +int VpdUpdate( +SK_AC *pAC, /* Adapters context */ +SK_IOC IoC) /* IO Context */ +{ + int vpd_size; + + vpd_size = pAC->vpd.vpd_size; + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("VPD update .. ")); + if ((pAC->vpd.v.vpd_status & VPD_VALID) != 0) { + if (VpdTransferBlock(pAC, IoC, pAC->vpd.vpd_buf + vpd_size/2, + vpd_size/2, vpd_size/2, VPD_WRITE) != vpd_size/2) { + + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, + ("transfer timed out\n")); + return(3); + } + } + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_TX, ("done\n")); + return(0); +} + diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c new file mode 100644 index 00000000000..b4e75022a65 --- /dev/null +++ b/drivers/net/sk98lin/skxmac2.c @@ -0,0 +1,4160 @@ +/****************************************************************************** + * + * Name: skxmac2.c + * Project: Gigabit Ethernet Adapters, Common Modules + * Version: $Revision: 1.102 $ + * Date: $Date: 2003/10/02 16:53:58 $ + * Purpose: Contains functions to initialize the MACs and PHYs + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect. + * (C)Copyright 2002-2003 Marvell. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +#include "h/skdrv1st.h" +#include "h/skdrv2nd.h" + +/* typedefs *******************************************************************/ + +/* BCOM PHY magic pattern list */ +typedef struct s_PhyHack { + int PhyReg; /* Phy register */ + SK_U16 PhyVal; /* Value to write */ +} BCOM_HACK; + +/* local variables ************************************************************/ + +#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM)))) +static const char SysKonnectFileId[] = + "@(#) $Id: skxmac2.c,v 1.102 2003/10/02 16:53:58 rschmidt Exp $ (C) Marvell."; +#endif + +#ifdef GENESIS +static BCOM_HACK BcomRegA1Hack[] = { + { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, { 0x17, 0x0013 }, + { 0x15, 0x0404 }, { 0x17, 0x8006 }, { 0x15, 0x0132 }, { 0x17, 0x8006 }, + { 0x15, 0x0232 }, { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 }, + { 0, 0 } +}; +static BCOM_HACK BcomRegC0Hack[] = { + { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1204 }, { 0x17, 0x0013 }, + { 0x15, 0x0A04 }, { 0x18, 0x0420 }, + { 0, 0 } +}; +#endif + +/* function prototypes ********************************************************/ +#ifdef GENESIS +static void SkXmInitPhyXmac(SK_AC*, SK_IOC, int, SK_BOOL); +static void SkXmInitPhyBcom(SK_AC*, SK_IOC, int, SK_BOOL); +static int SkXmAutoNegDoneXmac(SK_AC*, SK_IOC, int); +static int SkXmAutoNegDoneBcom(SK_AC*, SK_IOC, int); +#endif /* GENESIS */ +#ifdef YUKON +static void SkGmInitPhyMarv(SK_AC*, SK_IOC, int, SK_BOOL); +static int SkGmAutoNegDoneMarv(SK_AC*, SK_IOC, int); +#endif /* YUKON */ +#ifdef OTHER_PHY +static void SkXmInitPhyLone(SK_AC*, SK_IOC, int, SK_BOOL); +static void SkXmInitPhyNat (SK_AC*, SK_IOC, int, SK_BOOL); +static int SkXmAutoNegDoneLone(SK_AC*, SK_IOC, int); +static int SkXmAutoNegDoneNat (SK_AC*, SK_IOC, int); +#endif /* OTHER_PHY */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmPhyRead() - Read from XMAC PHY register + * + * Description: reads a 16-bit word from XMAC PHY or ext. PHY + * + * Returns: + * nothing + */ +void SkXmPhyRead( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Port, /* Port Index (MAC_1 + n) */ +int PhyReg, /* Register Address (Offset) */ +SK_U16 SK_FAR *pVal) /* Pointer to Value */ +{ + SK_U16 Mmu; + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + + /* write the PHY register's address */ + XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr); + + /* get the PHY register's value */ + XM_IN16(IoC, Port, XM_PHY_DATA, pVal); + + if (pPrt->PhyType != SK_PHY_XMAC) { + do { + XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu); + /* wait until 'Ready' is set */ + } while ((Mmu & XM_MMU_PHY_RDY) == 0); + + /* get the PHY register's value */ + XM_IN16(IoC, Port, XM_PHY_DATA, pVal); + } +} /* SkXmPhyRead */ + + +/****************************************************************************** + * + * SkXmPhyWrite() - Write to XMAC PHY register + * + * Description: writes a 16-bit word to XMAC PHY or ext. PHY + * + * Returns: + * nothing + */ +void SkXmPhyWrite( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Port, /* Port Index (MAC_1 + n) */ +int PhyReg, /* Register Address (Offset) */ +SK_U16 Val) /* Value */ +{ + SK_U16 Mmu; + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PhyType != SK_PHY_XMAC) { + do { + XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu); + /* wait until 'Busy' is cleared */ + } while ((Mmu & XM_MMU_PHY_BUSY) != 0); + } + + /* write the PHY register's address */ + XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr); + + /* write the PHY register's value */ + XM_OUT16(IoC, Port, XM_PHY_DATA, Val); + + if (pPrt->PhyType != SK_PHY_XMAC) { + do { + XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu); + /* wait until 'Busy' is cleared */ + } while ((Mmu & XM_MMU_PHY_BUSY) != 0); + } +} /* SkXmPhyWrite */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkGmPhyRead() - Read from GPHY register + * + * Description: reads a 16-bit word from GPHY through MDIO + * + * Returns: + * nothing + */ +void SkGmPhyRead( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Port, /* Port Index (MAC_1 + n) */ +int PhyReg, /* Register Address (Offset) */ +SK_U16 SK_FAR *pVal) /* Pointer to Value */ +{ + SK_U16 Ctrl; + SK_GEPORT *pPrt; +#ifdef VCPU + u_long SimCyle; + u_long SimLowTime; + + VCPUgetTime(&SimCyle, &SimLowTime); + VCPUprintf(0, "SkGmPhyRead(%u), SimCyle=%u, SimLowTime=%u\n", + PhyReg, SimCyle, SimLowTime); +#endif /* VCPU */ + + pPrt = &pAC->GIni.GP[Port]; + + /* set PHY-Register offset and 'Read' OpCode (= 1) */ + *pVal = (SK_U16)(GM_SMI_CT_PHY_AD(pPrt->PhyAddr) | + GM_SMI_CT_REG_AD(PhyReg) | GM_SMI_CT_OP_RD); + + GM_OUT16(IoC, Port, GM_SMI_CTRL, *pVal); + + GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl); + + /* additional check for MDC/MDIO activity */ + if ((Ctrl & GM_SMI_CT_BUSY) == 0) { + *pVal = 0; + return; + } + + *pVal |= GM_SMI_CT_BUSY; + + do { +#ifdef VCPU + VCPUwaitTime(1000); +#endif /* VCPU */ + + GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl); + + /* wait until 'ReadValid' is set */ + } while (Ctrl == *pVal); + + /* get the PHY register's value */ + GM_IN16(IoC, Port, GM_SMI_DATA, pVal); + +#ifdef VCPU + VCPUgetTime(&SimCyle, &SimLowTime); + VCPUprintf(0, "VCPUgetTime(), SimCyle=%u, SimLowTime=%u\n", + SimCyle, SimLowTime); +#endif /* VCPU */ + +} /* SkGmPhyRead */ + + +/****************************************************************************** + * + * SkGmPhyWrite() - Write to GPHY register + * + * Description: writes a 16-bit word to GPHY through MDIO + * + * Returns: + * nothing + */ +void SkGmPhyWrite( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Port, /* Port Index (MAC_1 + n) */ +int PhyReg, /* Register Address (Offset) */ +SK_U16 Val) /* Value */ +{ + SK_U16 Ctrl; + SK_GEPORT *pPrt; +#ifdef VCPU + SK_U32 DWord; + u_long SimCyle; + u_long SimLowTime; + + VCPUgetTime(&SimCyle, &SimLowTime); + VCPUprintf(0, "SkGmPhyWrite(Reg=%u, Val=0x%04x), SimCyle=%u, SimLowTime=%u\n", + PhyReg, Val, SimCyle, SimLowTime); +#endif /* VCPU */ + + pPrt = &pAC->GIni.GP[Port]; + + /* write the PHY register's value */ + GM_OUT16(IoC, Port, GM_SMI_DATA, Val); + + /* set PHY-Register offset and 'Write' OpCode (= 0) */ + Val = GM_SMI_CT_PHY_AD(pPrt->PhyAddr) | GM_SMI_CT_REG_AD(PhyReg); + + GM_OUT16(IoC, Port, GM_SMI_CTRL, Val); + + GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl); + + /* additional check for MDC/MDIO activity */ + if ((Ctrl & GM_SMI_CT_BUSY) == 0) { + return; + } + + Val |= GM_SMI_CT_BUSY; + + do { +#ifdef VCPU + /* read Timer value */ + SK_IN32(IoC, B2_TI_VAL, &DWord); + + VCPUwaitTime(1000); +#endif /* VCPU */ + + GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl); + + /* wait until 'Busy' is cleared */ + } while (Ctrl == Val); + +#ifdef VCPU + VCPUgetTime(&SimCyle, &SimLowTime); + VCPUprintf(0, "VCPUgetTime(), SimCyle=%u, SimLowTime=%u\n", + SimCyle, SimLowTime); +#endif /* VCPU */ + +} /* SkGmPhyWrite */ +#endif /* YUKON */ + + +#ifdef SK_DIAG +/****************************************************************************** + * + * SkGePhyRead() - Read from PHY register + * + * Description: calls a read PHY routine dep. on board type + * + * Returns: + * nothing + */ +void SkGePhyRead( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Port, /* Port Index (MAC_1 + n) */ +int PhyReg, /* Register Address (Offset) */ +SK_U16 *pVal) /* Pointer to Value */ +{ + void (*r_func)(SK_AC *pAC, SK_IOC IoC, int Port, int Reg, SK_U16 *pVal); + + if (pAC->GIni.GIGenesis) { + r_func = SkXmPhyRead; + } + else { + r_func = SkGmPhyRead; + } + + r_func(pAC, IoC, Port, PhyReg, pVal); +} /* SkGePhyRead */ + + +/****************************************************************************** + * + * SkGePhyWrite() - Write to PHY register + * + * Description: calls a write PHY routine dep. on board type + * + * Returns: + * nothing + */ +void SkGePhyWrite( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* I/O Context */ +int Port, /* Port Index (MAC_1 + n) */ +int PhyReg, /* Register Address (Offset) */ +SK_U16 Val) /* Value */ +{ + void (*w_func)(SK_AC *pAC, SK_IOC IoC, int Port, int Reg, SK_U16 Val); + + if (pAC->GIni.GIGenesis) { + w_func = SkXmPhyWrite; + } + else { + w_func = SkGmPhyWrite; + } + + w_func(pAC, IoC, Port, PhyReg, Val); +} /* SkGePhyWrite */ +#endif /* SK_DIAG */ + + +/****************************************************************************** + * + * SkMacPromiscMode() - Enable / Disable Promiscuous Mode + * + * Description: + * enables / disables promiscuous mode by setting Mode Register (XMAC) or + * Receive Control Register (GMAC) dep. on board type + * + * Returns: + * nothing + */ +void SkMacPromiscMode( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL Enable) /* Enable / Disable */ +{ +#ifdef YUKON + SK_U16 RcReg; +#endif +#ifdef GENESIS + SK_U32 MdReg; +#endif + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + XM_IN32(IoC, Port, XM_MODE, &MdReg); + /* enable or disable promiscuous mode */ + if (Enable) { + MdReg |= XM_MD_ENA_PROM; + } + else { + MdReg &= ~XM_MD_ENA_PROM; + } + /* setup Mode Register */ + XM_OUT32(IoC, Port, XM_MODE, MdReg); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg); + + /* enable or disable unicast and multicast filtering */ + if (Enable) { + RcReg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); + } + else { + RcReg |= (GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); + } + /* setup Receive Control Register */ + GM_OUT16(IoC, Port, GM_RX_CTRL, RcReg); + } +#endif /* YUKON */ + +} /* SkMacPromiscMode*/ + + +/****************************************************************************** + * + * SkMacHashing() - Enable / Disable Hashing + * + * Description: + * enables / disables hashing by setting Mode Register (XMAC) or + * Receive Control Register (GMAC) dep. on board type + * + * Returns: + * nothing + */ +void SkMacHashing( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL Enable) /* Enable / Disable */ +{ +#ifdef YUKON + SK_U16 RcReg; +#endif +#ifdef GENESIS + SK_U32 MdReg; +#endif + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + XM_IN32(IoC, Port, XM_MODE, &MdReg); + /* enable or disable hashing */ + if (Enable) { + MdReg |= XM_MD_ENA_HASH; + } + else { + MdReg &= ~XM_MD_ENA_HASH; + } + /* setup Mode Register */ + XM_OUT32(IoC, Port, XM_MODE, MdReg); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg); + + /* enable or disable multicast filtering */ + if (Enable) { + RcReg |= GM_RXCR_MCF_ENA; + } + else { + RcReg &= ~GM_RXCR_MCF_ENA; + } + /* setup Receive Control Register */ + GM_OUT16(IoC, Port, GM_RX_CTRL, RcReg); + } +#endif /* YUKON */ + +} /* SkMacHashing*/ + + +#ifdef SK_DIAG +/****************************************************************************** + * + * SkXmSetRxCmd() - Modify the value of the XMAC's Rx Command Register + * + * Description: + * The features + * - FCS stripping, SK_STRIP_FCS_ON/OFF + * - pad byte stripping, SK_STRIP_PAD_ON/OFF + * - don't set XMR_FS_ERR in status SK_LENERR_OK_ON/OFF + * for inrange length error frames + * - don't set XMR_FS_ERR in status SK_BIG_PK_OK_ON/OFF + * for frames > 1514 bytes + * - enable Rx of own packets SK_SELF_RX_ON/OFF + * + * for incoming packets may be enabled/disabled by this function. + * Additional modes may be added later. + * Multiple modes can be enabled/disabled at the same time. + * The new configuration is written to the Rx Command register immediately. + * + * Returns: + * nothing + */ +static void SkXmSetRxCmd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +int Mode) /* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF, + SK_LENERR_OK_ON/OFF, or SK_BIG_PK_OK_ON/OFF */ +{ + SK_U16 OldRxCmd; + SK_U16 RxCmd; + + XM_IN16(IoC, Port, XM_RX_CMD, &OldRxCmd); + + RxCmd = OldRxCmd; + + switch (Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) { + case SK_STRIP_FCS_ON: + RxCmd |= XM_RX_STRIP_FCS; + break; + case SK_STRIP_FCS_OFF: + RxCmd &= ~XM_RX_STRIP_FCS; + break; + } + + switch (Mode & (SK_STRIP_PAD_ON | SK_STRIP_PAD_OFF)) { + case SK_STRIP_PAD_ON: + RxCmd |= XM_RX_STRIP_PAD; + break; + case SK_STRIP_PAD_OFF: + RxCmd &= ~XM_RX_STRIP_PAD; + break; + } + + switch (Mode & (SK_LENERR_OK_ON | SK_LENERR_OK_OFF)) { + case SK_LENERR_OK_ON: + RxCmd |= XM_RX_LENERR_OK; + break; + case SK_LENERR_OK_OFF: + RxCmd &= ~XM_RX_LENERR_OK; + break; + } + + switch (Mode & (SK_BIG_PK_OK_ON | SK_BIG_PK_OK_OFF)) { + case SK_BIG_PK_OK_ON: + RxCmd |= XM_RX_BIG_PK_OK; + break; + case SK_BIG_PK_OK_OFF: + RxCmd &= ~XM_RX_BIG_PK_OK; + break; + } + + switch (Mode & (SK_SELF_RX_ON | SK_SELF_RX_OFF)) { + case SK_SELF_RX_ON: + RxCmd |= XM_RX_SELF_RX; + break; + case SK_SELF_RX_OFF: + RxCmd &= ~XM_RX_SELF_RX; + break; + } + + /* Write the new mode to the Rx command register if required */ + if (OldRxCmd != RxCmd) { + XM_OUT16(IoC, Port, XM_RX_CMD, RxCmd); + } +} /* SkXmSetRxCmd */ + + +/****************************************************************************** + * + * SkGmSetRxCmd() - Modify the value of the GMAC's Rx Control Register + * + * Description: + * The features + * - FCS (CRC) stripping, SK_STRIP_FCS_ON/OFF + * - don't set GMR_FS_LONG_ERR SK_BIG_PK_OK_ON/OFF + * for frames > 1514 bytes + * - enable Rx of own packets SK_SELF_RX_ON/OFF + * + * for incoming packets may be enabled/disabled by this function. + * Additional modes may be added later. + * Multiple modes can be enabled/disabled at the same time. + * The new configuration is written to the Rx Command register immediately. + * + * Returns: + * nothing + */ +static void SkGmSetRxCmd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +int Mode) /* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF, + SK_LENERR_OK_ON/OFF, or SK_BIG_PK_OK_ON/OFF */ +{ + SK_U16 OldRxCmd; + SK_U16 RxCmd; + + if ((Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) != 0) { + + GM_IN16(IoC, Port, GM_RX_CTRL, &OldRxCmd); + + RxCmd = OldRxCmd; + + if ((Mode & SK_STRIP_FCS_ON) != 0) { + RxCmd |= GM_RXCR_CRC_DIS; + } + else { + RxCmd &= ~GM_RXCR_CRC_DIS; + } + /* Write the new mode to the Rx control register if required */ + if (OldRxCmd != RxCmd) { + GM_OUT16(IoC, Port, GM_RX_CTRL, RxCmd); + } + } + + if ((Mode & (SK_BIG_PK_OK_ON | SK_BIG_PK_OK_OFF)) != 0) { + + GM_IN16(IoC, Port, GM_SERIAL_MODE, &OldRxCmd); + + RxCmd = OldRxCmd; + + if ((Mode & SK_BIG_PK_OK_ON) != 0) { + RxCmd |= GM_SMOD_JUMBO_ENA; + } + else { + RxCmd &= ~GM_SMOD_JUMBO_ENA; + } + /* Write the new mode to the Rx control register if required */ + if (OldRxCmd != RxCmd) { + GM_OUT16(IoC, Port, GM_SERIAL_MODE, RxCmd); + } + } +} /* SkGmSetRxCmd */ + + +/****************************************************************************** + * + * SkMacSetRxCmd() - Modify the value of the MAC's Rx Control Register + * + * Description: modifies the MAC's Rx Control reg. dep. on board type + * + * Returns: + * nothing + */ +void SkMacSetRxCmd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +int Mode) /* Rx Mode */ +{ + if (pAC->GIni.GIGenesis) { + + SkXmSetRxCmd(pAC, IoC, Port, Mode); + } + else { + + SkGmSetRxCmd(pAC, IoC, Port, Mode); + } + +} /* SkMacSetRxCmd */ + + +/****************************************************************************** + * + * SkMacCrcGener() - Enable / Disable CRC Generation + * + * Description: enables / disables CRC generation dep. on board type + * + * Returns: + * nothing + */ +void SkMacCrcGener( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL Enable) /* Enable / Disable */ +{ + SK_U16 Word; + + if (pAC->GIni.GIGenesis) { + + XM_IN16(IoC, Port, XM_TX_CMD, &Word); + + if (Enable) { + Word &= ~XM_TX_NO_CRC; + } + else { + Word |= XM_TX_NO_CRC; + } + /* setup Tx Command Register */ + XM_OUT16(IoC, Port, XM_TX_CMD, Word); + } + else { + + GM_IN16(IoC, Port, GM_TX_CTRL, &Word); + + if (Enable) { + Word &= ~GM_TXCR_CRC_DIS; + } + else { + Word |= GM_TXCR_CRC_DIS; + } + /* setup Tx Control Register */ + GM_OUT16(IoC, Port, GM_TX_CTRL, Word); + } + +} /* SkMacCrcGener*/ + +#endif /* SK_DIAG */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmClrExactAddr() - Clear Exact Match Address Registers + * + * Description: + * All Exact Match Address registers of the XMAC 'Port' will be + * cleared starting with 'StartNum' up to (and including) the + * Exact Match address number of 'StopNum'. + * + * Returns: + * nothing + */ +void SkXmClrExactAddr( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +int StartNum, /* Begin with this Address Register Index (0..15) */ +int StopNum) /* Stop after finished with this Register Idx (0..15) */ +{ + int i; + SK_U16 ZeroAddr[3] = {0x0000, 0x0000, 0x0000}; + + if ((unsigned)StartNum > 15 || (unsigned)StopNum > 15 || + StartNum > StopNum) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E001, SKERR_HWI_E001MSG); + return; + } + + for (i = StartNum; i <= StopNum; i++) { + XM_OUTADDR(IoC, Port, XM_EXM(i), &ZeroAddr[0]); + } +} /* SkXmClrExactAddr */ +#endif /* GENESIS */ + + +/****************************************************************************** + * + * SkMacFlushTxFifo() - Flush the MAC's transmit FIFO + * + * Description: + * Flush the transmit FIFO of the MAC specified by the index 'Port' + * + * Returns: + * nothing + */ +void SkMacFlushTxFifo( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ +#ifdef GENESIS + SK_U32 MdReg; + + if (pAC->GIni.GIGenesis) { + + XM_IN32(IoC, Port, XM_MODE, &MdReg); + + XM_OUT32(IoC, Port, XM_MODE, MdReg | XM_MD_FTF); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* no way to flush the FIFO we have to issue a reset */ + /* TBD */ + } +#endif /* YUKON */ + +} /* SkMacFlushTxFifo */ + + +/****************************************************************************** + * + * SkMacFlushRxFifo() - Flush the MAC's receive FIFO + * + * Description: + * Flush the receive FIFO of the MAC specified by the index 'Port' + * + * Returns: + * nothing + */ +static void SkMacFlushRxFifo( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ +#ifdef GENESIS + SK_U32 MdReg; + + if (pAC->GIni.GIGenesis) { + + XM_IN32(IoC, Port, XM_MODE, &MdReg); + + XM_OUT32(IoC, Port, XM_MODE, MdReg | XM_MD_FRF); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* no way to flush the FIFO we have to issue a reset */ + /* TBD */ + } +#endif /* YUKON */ + +} /* SkMacFlushRxFifo */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmSoftRst() - Do a XMAC software reset + * + * Description: + * The PHY registers should not be destroyed during this + * kind of software reset. Therefore the XMAC Software Reset + * (XM_GP_RES_MAC bit in XM_GP_PORT) must not be used! + * + * The software reset is done by + * - disabling the Rx and Tx state machine, + * - resetting the statistics module, + * - clear all other significant XMAC Mode, + * Command, and Control Registers + * - clearing the Hash Register and the + * Exact Match Address registers, and + * - flushing the XMAC's Rx and Tx FIFOs. + * + * Note: + * Another requirement when stopping the XMAC is to + * avoid sending corrupted frames on the network. + * Disabling the Tx state machine will NOT interrupt + * the currently transmitted frame. But we must take care + * that the Tx FIFO is cleared AFTER the current frame + * is complete sent to the network. + * + * It takes about 12ns to send a frame with 1538 bytes. + * One PCI clock goes at least 15ns (66MHz). Therefore + * after reading XM_GP_PORT back, we are sure that the + * transmitter is disabled AND idle. And this means + * we may flush the transmit FIFO now. + * + * Returns: + * nothing + */ +static void SkXmSoftRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U16 ZeroAddr[4] = {0x0000, 0x0000, 0x0000, 0x0000}; + + /* reset the statistics module */ + XM_OUT32(IoC, Port, XM_GP_PORT, XM_GP_RES_STAT); + + /* disable all XMAC IRQs */ + XM_OUT16(IoC, Port, XM_IMSK, 0xffff); + + XM_OUT32(IoC, Port, XM_MODE, 0); /* clear Mode Reg */ + + XM_OUT16(IoC, Port, XM_TX_CMD, 0); /* reset TX CMD Reg */ + XM_OUT16(IoC, Port, XM_RX_CMD, 0); /* reset RX CMD Reg */ + + /* disable all PHY IRQs */ + switch (pAC->GIni.GP[Port].PhyType) { + case SK_PHY_BCOM: + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, 0xffff); + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, 0); + break; + case SK_PHY_NAT: + /* todo: National + SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, 0xffff); */ + break; +#endif /* OTHER_PHY */ + } + + /* clear the Hash Register */ + XM_OUTHASH(IoC, Port, XM_HSM, &ZeroAddr); + + /* clear the Exact Match Address registers */ + SkXmClrExactAddr(pAC, IoC, Port, 0, 15); + + /* clear the Source Check Address registers */ + XM_OUTHASH(IoC, Port, XM_SRC_CHK, &ZeroAddr); + +} /* SkXmSoftRst */ + + +/****************************************************************************** + * + * SkXmHardRst() - Do a XMAC hardware reset + * + * Description: + * The XMAC of the specified 'Port' and all connected devices + * (PHY and SERDES) will receive a reset signal on its *Reset pins. + * External PHYs must be reset by clearing a bit in the GPIO register + * (Timing requirements: Broadcom: 400ns, Level One: none, National: 80ns). + * + * ATTENTION: + * It is absolutely necessary to reset the SW_RST Bit first + * before calling this function. + * + * Returns: + * nothing + */ +static void SkXmHardRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U32 Reg; + int i; + int TOut; + SK_U16 Word; + + for (i = 0; i < 4; i++) { + /* TX_MFF_CTRL1 has 32 bits, but only the lowest 16 bits are used */ + SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_MAC_RST); + + TOut = 0; + do { + if (TOut++ > 10000) { + /* + * Adapter seems to be in RESET state. + * Registers cannot be written. + */ + return; + } + + SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_SET_MAC_RST); + + SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &Word); + + } while ((Word & MFF_SET_MAC_RST) == 0); + } + + /* For external PHYs there must be special handling */ + if (pAC->GIni.GP[Port].PhyType != SK_PHY_XMAC) { + + SK_IN32(IoC, B2_GP_IO, &Reg); + + if (Port == 0) { + Reg |= GP_DIR_0; /* set to output */ + Reg &= ~GP_IO_0; /* set PHY reset (active low) */ + } + else { + Reg |= GP_DIR_2; /* set to output */ + Reg &= ~GP_IO_2; /* set PHY reset (active low) */ + } + /* reset external PHY */ + SK_OUT32(IoC, B2_GP_IO, Reg); + + /* short delay */ + SK_IN32(IoC, B2_GP_IO, &Reg); + } +} /* SkXmHardRst */ + + +/****************************************************************************** + * + * SkXmClearRst() - Release the PHY & XMAC reset + * + * Description: + * + * Returns: + * nothing + */ +static void SkXmClearRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U32 DWord; + + /* clear HW reset */ + SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_CLR_MAC_RST); + + if (pAC->GIni.GP[Port].PhyType != SK_PHY_XMAC) { + + SK_IN32(IoC, B2_GP_IO, &DWord); + + if (Port == 0) { + DWord |= (GP_DIR_0 | GP_IO_0); /* set to output */ + } + else { + DWord |= (GP_DIR_2 | GP_IO_2); /* set to output */ + } + /* Clear PHY reset */ + SK_OUT32(IoC, B2_GP_IO, DWord); + + /* Enable GMII interface */ + XM_OUT16(IoC, Port, XM_HW_CFG, XM_HW_GMII_MD); + } +} /* SkXmClearRst */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkGmSoftRst() - Do a GMAC software reset + * + * Description: + * The GPHY registers should not be destroyed during this + * kind of software reset. + * + * Returns: + * nothing + */ +static void SkGmSoftRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U16 EmptyHash[4] = {0x0000, 0x0000, 0x0000, 0x0000}; + SK_U16 RxCtrl; + + /* reset the statistics module */ + + /* disable all GMAC IRQs */ + SK_OUT8(IoC, GMAC_IRQ_MSK, 0); + + /* disable all PHY IRQs */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0); + + /* clear the Hash Register */ + GM_OUTHASH(IoC, Port, GM_MC_ADDR_H1, EmptyHash); + + /* Enable Unicast and Multicast filtering */ + GM_IN16(IoC, Port, GM_RX_CTRL, &RxCtrl); + + GM_OUT16(IoC, Port, GM_RX_CTRL, + (SK_U16)(RxCtrl | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA)); + +} /* SkGmSoftRst */ + + +/****************************************************************************** + * + * SkGmHardRst() - Do a GMAC hardware reset + * + * Description: + * + * Returns: + * nothing + */ +static void SkGmHardRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U32 DWord; + + /* WA code for COMA mode */ + if (pAC->GIni.GIYukonLite && + pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) { + + SK_IN32(IoC, B2_GP_IO, &DWord); + + DWord |= (GP_DIR_9 | GP_IO_9); + + /* set PHY reset */ + SK_OUT32(IoC, B2_GP_IO, DWord); + } + + /* set GPHY Control reset */ + SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), GPC_RST_SET); + + /* set GMAC Control reset */ + SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_SET); + +} /* SkGmHardRst */ + + +/****************************************************************************** + * + * SkGmClearRst() - Release the GPHY & GMAC reset + * + * Description: + * + * Returns: + * nothing + */ +static void SkGmClearRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U32 DWord; + +#ifdef XXX + /* clear GMAC Control reset */ + SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_CLR); + + /* set GMAC Control reset */ + SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_RST_SET); +#endif /* XXX */ + + /* WA code for COMA mode */ + if (pAC->GIni.GIYukonLite && + pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) { + + SK_IN32(IoC, B2_GP_IO, &DWord); + + DWord |= GP_DIR_9; /* set to output */ + DWord &= ~GP_IO_9; /* clear PHY reset (active high) */ + + /* clear PHY reset */ + SK_OUT32(IoC, B2_GP_IO, DWord); + } + + /* set HWCFG_MODE */ + DWord = GPC_INT_POL_HI | GPC_DIS_FC | GPC_DIS_SLEEP | + GPC_ENA_XC | GPC_ANEG_ADV_ALL_M | GPC_ENA_PAUSE | + (pAC->GIni.GICopperType ? GPC_HWCFG_GMII_COP : + GPC_HWCFG_GMII_FIB); + + /* set GPHY Control reset */ + SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), DWord | GPC_RST_SET); + + /* release GPHY Control reset */ + SK_OUT32(IoC, MR_ADDR(Port, GPHY_CTRL), DWord | GPC_RST_CLR); + +#ifdef VCPU + VCpuWait(9000); +#endif /* VCPU */ + + /* clear GMAC Control reset */ + SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR); + +#ifdef VCPU + VCpuWait(2000); + + SK_IN32(IoC, MR_ADDR(Port, GPHY_CTRL), &DWord); + + SK_IN32(IoC, B0_ISRC, &DWord); +#endif /* VCPU */ + +} /* SkGmClearRst */ +#endif /* YUKON */ + + +/****************************************************************************** + * + * SkMacSoftRst() - Do a MAC software reset + * + * Description: calls a MAC software reset routine dep. on board type + * + * Returns: + * nothing + */ +void SkMacSoftRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + + /* disable receiver and transmitter */ + SkMacRxTxDisable(pAC, IoC, Port); + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + SkXmSoftRst(pAC, IoC, Port); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + SkGmSoftRst(pAC, IoC, Port); + } +#endif /* YUKON */ + + /* flush the MAC's Rx and Tx FIFOs */ + SkMacFlushTxFifo(pAC, IoC, Port); + + SkMacFlushRxFifo(pAC, IoC, Port); + + pPrt->PState = SK_PRT_STOP; + +} /* SkMacSoftRst */ + + +/****************************************************************************** + * + * SkMacHardRst() - Do a MAC hardware reset + * + * Description: calls a MAC hardware reset routine dep. on board type + * + * Returns: + * nothing + */ +void SkMacHardRst( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + SkXmHardRst(pAC, IoC, Port); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + SkGmHardRst(pAC, IoC, Port); + } +#endif /* YUKON */ + + pAC->GIni.GP[Port].PState = SK_PRT_RESET; + +} /* SkMacHardRst */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmInitMac() - Initialize the XMAC II + * + * Description: + * Initialize the XMAC of the specified port. + * The XMAC must be reset or stopped before calling this function. + * + * Note: + * The XMAC's Rx and Tx state machine is still disabled when returning. + * + * Returns: + * nothing + */ +void SkXmInitMac( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + int i; + SK_U16 SWord; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PState == SK_PRT_STOP) { + /* Port State: SK_PRT_STOP */ + /* Verify that the reset bit is cleared */ + SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &SWord); + + if ((SWord & MFF_SET_MAC_RST) != 0) { + /* PState does not match HW state */ + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E006, SKERR_HWI_E006MSG); + /* Correct it */ + pPrt->PState = SK_PRT_RESET; + } + } + + if (pPrt->PState == SK_PRT_RESET) { + + SkXmClearRst(pAC, IoC, Port); + + if (pPrt->PhyType != SK_PHY_XMAC) { + /* read Id from external PHY (all have the same address) */ + SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_ID1, &pPrt->PhyId1); + + /* + * Optimize MDIO transfer by suppressing preamble. + * Must be done AFTER first access to BCOM chip. + */ + XM_IN16(IoC, Port, XM_MMU_CMD, &SWord); + + XM_OUT16(IoC, Port, XM_MMU_CMD, SWord | XM_MMU_NO_PRE); + + if (pPrt->PhyId1 == PHY_BCOM_ID1_C0) { + /* + * Workaround BCOM Errata for the C0 type. + * Write magic patterns to reserved registers. + */ + i = 0; + while (BcomRegC0Hack[i].PhyReg != 0) { + SkXmPhyWrite(pAC, IoC, Port, BcomRegC0Hack[i].PhyReg, + BcomRegC0Hack[i].PhyVal); + i++; + } + } + else if (pPrt->PhyId1 == PHY_BCOM_ID1_A1) { + /* + * Workaround BCOM Errata for the A1 type. + * Write magic patterns to reserved registers. + */ + i = 0; + while (BcomRegA1Hack[i].PhyReg != 0) { + SkXmPhyWrite(pAC, IoC, Port, BcomRegA1Hack[i].PhyReg, + BcomRegA1Hack[i].PhyVal); + i++; + } + } + + /* + * Workaround BCOM Errata (#10523) for all BCom PHYs. + * Disable Power Management after reset. + */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &SWord); + + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, + (SK_U16)(SWord | PHY_B_AC_DIS_PM)); + + /* PHY LED initialization is done in SkGeXmitLED() */ + } + + /* Dummy read the Interrupt source register */ + XM_IN16(IoC, Port, XM_ISRC, &SWord); + + /* + * The auto-negotiation process starts immediately after + * clearing the reset. The auto-negotiation process should be + * started by the SIRQ, therefore stop it here immediately. + */ + SkMacInitPhy(pAC, IoC, Port, SK_FALSE); + +#ifdef TEST_ONLY + /* temp. code: enable signal detect */ + /* WARNING: do not override GMII setting above */ + XM_OUT16(IoC, Port, XM_HW_CFG, XM_HW_COM4SIG); +#endif + } + + /* + * configure the XMACs Station Address + * B2_MAC_2 = xx xx xx xx xx x1 is programmed to XMAC A + * B2_MAC_3 = xx xx xx xx xx x2 is programmed to XMAC B + */ + for (i = 0; i < 3; i++) { + /* + * The following 2 statements are together endianess + * independent. Remember this when changing. + */ + SK_IN16(IoC, (B2_MAC_2 + Port * 8 + i * 2), &SWord); + + XM_OUT16(IoC, Port, (XM_SA + i * 2), SWord); + } + + /* Tx Inter Packet Gap (XM_TX_IPG): use default */ + /* Tx High Water Mark (XM_TX_HI_WM): use default */ + /* Tx Low Water Mark (XM_TX_LO_WM): use default */ + /* Host Request Threshold (XM_HT_THR): use default */ + /* Rx Request Threshold (XM_RX_THR): use default */ + /* Rx Low Water Mark (XM_RX_LO_WM): use default */ + + /* configure Rx High Water Mark (XM_RX_HI_WM) */ + XM_OUT16(IoC, Port, XM_RX_HI_WM, SK_XM_RX_HI_WM); + + /* Configure Tx Request Threshold */ + SWord = SK_XM_THR_SL; /* for single port */ + + if (pAC->GIni.GIMacsFound > 1) { + switch (pAC->GIni.GIPortUsage) { + case SK_RED_LINK: + SWord = SK_XM_THR_REDL; /* redundant link */ + break; + case SK_MUL_LINK: + SWord = SK_XM_THR_MULL; /* load balancing */ + break; + case SK_JUMBO_LINK: + SWord = SK_XM_THR_JUMBO; /* jumbo frames */ + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E014, SKERR_HWI_E014MSG); + break; + } + } + XM_OUT16(IoC, Port, XM_TX_THR, SWord); + + /* setup register defaults for the Tx Command Register */ + XM_OUT16(IoC, Port, XM_TX_CMD, XM_TX_AUTO_PAD); + + /* setup register defaults for the Rx Command Register */ + SWord = XM_RX_STRIP_FCS | XM_RX_LENERR_OK; + + if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) { + SWord |= XM_RX_BIG_PK_OK; + } + + if (pPrt->PLinkMode == SK_LMODE_HALF) { + /* + * If in manual half duplex mode the other side might be in + * full duplex mode, so ignore if a carrier extension is not seen + * on frames received + */ + SWord |= XM_RX_DIS_CEXT; + } + + XM_OUT16(IoC, Port, XM_RX_CMD, SWord); + + /* + * setup register defaults for the Mode Register + * - Don't strip error frames to avoid Store & Forward + * on the Rx side. + * - Enable 'Check Station Address' bit + * - Enable 'Check Address Array' bit + */ + XM_OUT32(IoC, Port, XM_MODE, XM_DEF_MODE); + + /* + * Initialize the Receive Counter Event Mask (XM_RX_EV_MSK) + * - Enable all bits excepting 'Octets Rx OK Low CntOv' + * and 'Octets Rx OK Hi Cnt Ov'. + */ + XM_OUT32(IoC, Port, XM_RX_EV_MSK, XMR_DEF_MSK); + + /* + * Initialize the Transmit Counter Event Mask (XM_TX_EV_MSK) + * - Enable all bits excepting 'Octets Tx OK Low CntOv' + * and 'Octets Tx OK Hi Cnt Ov'. + */ + XM_OUT32(IoC, Port, XM_TX_EV_MSK, XMT_DEF_MSK); + + /* + * Do NOT init XMAC interrupt mask here. + * All interrupts remain disable until link comes up! + */ + + /* + * Any additional configuration changes may be done now. + * The last action is to enable the Rx and Tx state machine. + * This should be done after the auto-negotiation process + * has been completed successfully. + */ +} /* SkXmInitMac */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkGmInitMac() - Initialize the GMAC + * + * Description: + * Initialize the GMAC of the specified port. + * The GMAC must be reset or stopped before calling this function. + * + * Note: + * The GMAC's Rx and Tx state machine is still disabled when returning. + * + * Returns: + * nothing + */ +void SkGmInitMac( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + int i; + SK_U16 SWord; + SK_U32 DWord; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PState == SK_PRT_STOP) { + /* Port State: SK_PRT_STOP */ + /* Verify that the reset bit is cleared */ + SK_IN32(IoC, MR_ADDR(Port, GMAC_CTRL), &DWord); + + if ((DWord & GMC_RST_SET) != 0) { + /* PState does not match HW state */ + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E006, SKERR_HWI_E006MSG); + /* Correct it */ + pPrt->PState = SK_PRT_RESET; + } + } + + if (pPrt->PState == SK_PRT_RESET) { + + SkGmHardRst(pAC, IoC, Port); + + SkGmClearRst(pAC, IoC, Port); + + /* Auto-negotiation ? */ + if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { + /* Auto-negotiation disabled */ + + /* get General Purpose Control */ + GM_IN16(IoC, Port, GM_GP_CTRL, &SWord); + + /* disable auto-update for speed, duplex and flow-control */ + SWord |= GM_GPCR_AU_ALL_DIS; + + /* setup General Purpose Control Register */ + GM_OUT16(IoC, Port, GM_GP_CTRL, SWord); + + SWord = GM_GPCR_AU_ALL_DIS; + } + else { + SWord = 0; + } + + /* speed settings */ + switch (pPrt->PLinkSpeed) { + case SK_LSPEED_AUTO: + case SK_LSPEED_1000MBPS: + SWord |= GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100; + break; + case SK_LSPEED_100MBPS: + SWord |= GM_GPCR_SPEED_100; + break; + case SK_LSPEED_10MBPS: + break; + } + + /* duplex settings */ + if (pPrt->PLinkMode != SK_LMODE_HALF) { + /* set full duplex */ + SWord |= GM_GPCR_DUP_FULL; + } + + /* flow-control settings */ + switch (pPrt->PFlowCtrlMode) { + case SK_FLOW_MODE_NONE: + /* set Pause Off */ + SK_OUT32(IoC, MR_ADDR(Port, GMAC_CTRL), GMC_PAUSE_OFF); + /* disable Tx & Rx flow-control */ + SWord |= GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; + break; + case SK_FLOW_MODE_LOC_SEND: + /* disable Rx flow-control */ + SWord |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; + break; + case SK_FLOW_MODE_SYMMETRIC: + case SK_FLOW_MODE_SYM_OR_REM: + /* enable Tx & Rx flow-control */ + break; + } + + /* setup General Purpose Control Register */ + GM_OUT16(IoC, Port, GM_GP_CTRL, SWord); + + /* dummy read the Interrupt Source Register */ + SK_IN16(IoC, GMAC_IRQ_SRC, &SWord); + +#ifndef VCPU + /* read Id from PHY */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_ID1, &pPrt->PhyId1); + + SkGmInitPhyMarv(pAC, IoC, Port, SK_FALSE); +#endif /* VCPU */ + } + + (void)SkGmResetCounter(pAC, IoC, Port); + + /* setup Transmit Control Register */ + GM_OUT16(IoC, Port, GM_TX_CTRL, TX_COL_THR(pPrt->PMacColThres)); + + /* setup Receive Control Register */ + GM_OUT16(IoC, Port, GM_RX_CTRL, GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA | + GM_RXCR_CRC_DIS); + + /* setup Transmit Flow Control Register */ + GM_OUT16(IoC, Port, GM_TX_FLOW_CTRL, 0xffff); + + /* setup Transmit Parameter Register */ +#ifdef VCPU + GM_IN16(IoC, Port, GM_TX_PARAM, &SWord); +#endif /* VCPU */ + + SWord = TX_JAM_LEN_VAL(pPrt->PMacJamLen) | + TX_JAM_IPG_VAL(pPrt->PMacJamIpgVal) | + TX_IPG_JAM_DATA(pPrt->PMacJamIpgData); + + GM_OUT16(IoC, Port, GM_TX_PARAM, SWord); + + /* configure the Serial Mode Register */ +#ifdef VCPU + GM_IN16(IoC, Port, GM_SERIAL_MODE, &SWord); +#endif /* VCPU */ + + SWord = GM_SMOD_VLAN_ENA | IPG_DATA_VAL(pPrt->PMacIpgData); + + if (pPrt->PMacLimit4) { + /* reset of collision counter after 4 consecutive collisions */ + SWord |= GM_SMOD_LIMIT_4; + } + + if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) { + /* enable jumbo mode (Max. Frame Length = 9018) */ + SWord |= GM_SMOD_JUMBO_ENA; + } + + GM_OUT16(IoC, Port, GM_SERIAL_MODE, SWord); + + /* + * configure the GMACs Station Addresses + * in PROM you can find our addresses at: + * B2_MAC_1 = xx xx xx xx xx x0 virtual address + * B2_MAC_2 = xx xx xx xx xx x1 is programmed to GMAC A + * B2_MAC_3 = xx xx xx xx xx x2 is reserved for DualPort + */ + + for (i = 0; i < 3; i++) { + /* + * The following 2 statements are together endianess + * independent. Remember this when changing. + */ + /* physical address: will be used for pause frames */ + SK_IN16(IoC, (B2_MAC_2 + Port * 8 + i * 2), &SWord); + +#ifdef WA_DEV_16 + /* WA for deviation #16 */ + if (pAC->GIni.GIChipId == CHIP_ID_YUKON && pAC->GIni.GIChipRev == 0) { + /* swap the address bytes */ + SWord = ((SWord & 0xff00) >> 8) | ((SWord & 0x00ff) << 8); + + /* write to register in reversed order */ + GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + (2 - i) * 4), SWord); + } + else { + GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord); + } +#else + GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord); +#endif /* WA_DEV_16 */ + + /* virtual address: will be used for data */ + SK_IN16(IoC, (B2_MAC_1 + Port * 8 + i * 2), &SWord); + + GM_OUT16(IoC, Port, (GM_SRC_ADDR_2L + i * 4), SWord); + + /* reset Multicast filtering Hash registers 1-3 */ + GM_OUT16(IoC, Port, GM_MC_ADDR_H1 + 4*i, 0); + } + + /* reset Multicast filtering Hash register 4 */ + GM_OUT16(IoC, Port, GM_MC_ADDR_H4, 0); + + /* enable interrupt mask for counter overflows */ + GM_OUT16(IoC, Port, GM_TX_IRQ_MSK, 0); + GM_OUT16(IoC, Port, GM_RX_IRQ_MSK, 0); + GM_OUT16(IoC, Port, GM_TR_IRQ_MSK, 0); + +#if defined(SK_DIAG) || defined(DEBUG) + /* read General Purpose Status */ + GM_IN16(IoC, Port, GM_GP_STAT, &SWord); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("MAC Stat Reg.=0x%04X\n", SWord)); +#endif /* SK_DIAG || DEBUG */ + +#ifdef SK_DIAG + c_print("MAC Stat Reg=0x%04X\n", SWord); +#endif /* SK_DIAG */ + +} /* SkGmInitMac */ +#endif /* YUKON */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmInitDupMd() - Initialize the XMACs Duplex Mode + * + * Description: + * This function initializes the XMACs Duplex Mode. + * It should be called after successfully finishing + * the Auto-negotiation Process + * + * Returns: + * nothing + */ +static void SkXmInitDupMd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + switch (pAC->GIni.GP[Port].PLinkModeStatus) { + case SK_LMODE_STAT_AUTOHALF: + case SK_LMODE_STAT_HALF: + /* Configuration Actions for Half Duplex Mode */ + /* + * XM_BURST = default value. We are probable not quick + * enough at the 'XMAC' bus to burst 8kB. + * The XMAC stops bursting if no transmit frames + * are available or the burst limit is exceeded. + */ + /* XM_TX_RT_LIM = default value (15) */ + /* XM_TX_STIME = default value (0xff = 4096 bit times) */ + break; + case SK_LMODE_STAT_AUTOFULL: + case SK_LMODE_STAT_FULL: + /* Configuration Actions for Full Duplex Mode */ + /* + * The duplex mode is configured by the PHY, + * therefore it seems to be that there is nothing + * to do here. + */ + break; + case SK_LMODE_STAT_UNKNOWN: + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E007, SKERR_HWI_E007MSG); + break; + } +} /* SkXmInitDupMd */ + + +/****************************************************************************** + * + * SkXmInitPauseMd() - initialize the Pause Mode to be used for this port + * + * Description: + * This function initializes the Pause Mode which should + * be used for this port. + * It should be called after successfully finishing + * the Auto-negotiation Process + * + * Returns: + * nothing + */ +static void SkXmInitPauseMd( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U32 DWord; + SK_U16 Word; + + pPrt = &pAC->GIni.GP[Port]; + + XM_IN16(IoC, Port, XM_MMU_CMD, &Word); + + if (pPrt->PFlowCtrlStatus == SK_FLOW_STAT_NONE || + pPrt->PFlowCtrlStatus == SK_FLOW_STAT_LOC_SEND) { + + /* Disable Pause Frame Reception */ + Word |= XM_MMU_IGN_PF; + } + else { + /* + * enabling pause frame reception is required for 1000BT + * because the XMAC is not reset if the link is going down + */ + /* Enable Pause Frame Reception */ + Word &= ~XM_MMU_IGN_PF; + } + + XM_OUT16(IoC, Port, XM_MMU_CMD, Word); + + XM_IN32(IoC, Port, XM_MODE, &DWord); + + if (pPrt->PFlowCtrlStatus == SK_FLOW_STAT_SYMMETRIC || + pPrt->PFlowCtrlStatus == SK_FLOW_STAT_LOC_SEND) { + + /* + * Configure Pause Frame Generation + * Use internal and external Pause Frame Generation. + * Sending pause frames is edge triggered. + * Send a Pause frame with the maximum pause time if + * internal oder external FIFO full condition occurs. + * Send a zero pause time frame to re-start transmission. + */ + + /* XM_PAUSE_DA = '010000C28001' (default) */ + + /* XM_MAC_PTIME = 0xffff (maximum) */ + /* remember this value is defined in big endian (!) */ + XM_OUT16(IoC, Port, XM_MAC_PTIME, 0xffff); + + /* Set Pause Mode in Mode Register */ + DWord |= XM_PAUSE_MODE; + + /* Set Pause Mode in MAC Rx FIFO */ + SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_PAUSE); + } + else { + /* + * disable pause frame generation is required for 1000BT + * because the XMAC is not reset if the link is going down + */ + /* Disable Pause Mode in Mode Register */ + DWord &= ~XM_PAUSE_MODE; + + /* Disable Pause Mode in MAC Rx FIFO */ + SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_DIS_PAUSE); + } + + XM_OUT32(IoC, Port, XM_MODE, DWord); +} /* SkXmInitPauseMd*/ + + +/****************************************************************************** + * + * SkXmInitPhyXmac() - Initialize the XMAC Phy registers + * + * Description: initializes all the XMACs Phy registers + * + * Note: + * + * Returns: + * nothing + */ +static void SkXmInitPhyXmac( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ +{ + SK_GEPORT *pPrt; + SK_U16 Ctrl; + + pPrt = &pAC->GIni.GP[Port]; + Ctrl = 0; + + /* Auto-negotiation ? */ + if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("InitPhyXmac: no auto-negotiation Port %d\n", Port)); + /* Set DuplexMode in Config register */ + if (pPrt->PLinkMode == SK_LMODE_FULL) { + Ctrl |= PHY_CT_DUP_MD; + } + + /* + * Do NOT enable Auto-negotiation here. This would hold + * the link down because no IDLEs are transmitted + */ + } + else { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("InitPhyXmac: with auto-negotiation Port %d\n", Port)); + /* Set Auto-negotiation advertisement */ + + /* Set Full/half duplex capabilities */ + switch (pPrt->PLinkMode) { + case SK_LMODE_AUTOHALF: + Ctrl |= PHY_X_AN_HD; + break; + case SK_LMODE_AUTOFULL: + Ctrl |= PHY_X_AN_FD; + break; + case SK_LMODE_AUTOBOTH: + Ctrl |= PHY_X_AN_FD | PHY_X_AN_HD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, + SKERR_HWI_E015MSG); + } + + /* Set Flow-control capabilities */ + switch (pPrt->PFlowCtrlMode) { + case SK_FLOW_MODE_NONE: + Ctrl |= PHY_X_P_NO_PAUSE; + break; + case SK_FLOW_MODE_LOC_SEND: + Ctrl |= PHY_X_P_ASYM_MD; + break; + case SK_FLOW_MODE_SYMMETRIC: + Ctrl |= PHY_X_P_SYM_MD; + break; + case SK_FLOW_MODE_SYM_OR_REM: + Ctrl |= PHY_X_P_BOTH_MD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, + SKERR_HWI_E016MSG); + } + + /* Write AutoNeg Advertisement Register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_XMAC_AUNE_ADV, Ctrl); + + /* Restart Auto-negotiation */ + Ctrl = PHY_CT_ANE | PHY_CT_RE_CFG; + } + + if (DoLoop) { + /* Set the Phy Loopback bit, too */ + Ctrl |= PHY_CT_LOOP; + } + + /* Write to the Phy control register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_XMAC_CTRL, Ctrl); +} /* SkXmInitPhyXmac */ + + +/****************************************************************************** + * + * SkXmInitPhyBcom() - Initialize the Broadcom Phy registers + * + * Description: initializes all the Broadcom Phy registers + * + * Note: + * + * Returns: + * nothing + */ +static void SkXmInitPhyBcom( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ +{ + SK_GEPORT *pPrt; + SK_U16 Ctrl1; + SK_U16 Ctrl2; + SK_U16 Ctrl3; + SK_U16 Ctrl4; + SK_U16 Ctrl5; + + Ctrl1 = PHY_CT_SP1000; + Ctrl2 = 0; + Ctrl3 = PHY_SEL_TYPE; + Ctrl4 = PHY_B_PEC_EN_LTR; + Ctrl5 = PHY_B_AC_TX_TST; + + pPrt = &pAC->GIni.GP[Port]; + + /* manually Master/Slave ? */ + if (pPrt->PMSMode != SK_MS_MODE_AUTO) { + Ctrl2 |= PHY_B_1000C_MSE; + + if (pPrt->PMSMode == SK_MS_MODE_MASTER) { + Ctrl2 |= PHY_B_1000C_MSC; + } + } + /* Auto-negotiation ? */ + if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("InitPhyBcom: no auto-negotiation Port %d\n", Port)); + /* Set DuplexMode in Config register */ + if (pPrt->PLinkMode == SK_LMODE_FULL) { + Ctrl1 |= PHY_CT_DUP_MD; + } + + /* Determine Master/Slave manually if not already done */ + if (pPrt->PMSMode == SK_MS_MODE_AUTO) { + Ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */ + } + + /* + * Do NOT enable Auto-negotiation here. This would hold + * the link down because no IDLES are transmitted + */ + } + else { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("InitPhyBcom: with auto-negotiation Port %d\n", Port)); + /* Set Auto-negotiation advertisement */ + + /* + * Workaround BCOM Errata #1 for the C5 type. + * 1000Base-T Link Acquisition Failure in Slave Mode + * Set Repeater/DTE bit 10 of the 1000Base-T Control Register + */ + Ctrl2 |= PHY_B_1000C_RD; + + /* Set Full/half duplex capabilities */ + switch (pPrt->PLinkMode) { + case SK_LMODE_AUTOHALF: + Ctrl2 |= PHY_B_1000C_AHD; + break; + case SK_LMODE_AUTOFULL: + Ctrl2 |= PHY_B_1000C_AFD; + break; + case SK_LMODE_AUTOBOTH: + Ctrl2 |= PHY_B_1000C_AFD | PHY_B_1000C_AHD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, + SKERR_HWI_E015MSG); + } + + /* Set Flow-control capabilities */ + switch (pPrt->PFlowCtrlMode) { + case SK_FLOW_MODE_NONE: + Ctrl3 |= PHY_B_P_NO_PAUSE; + break; + case SK_FLOW_MODE_LOC_SEND: + Ctrl3 |= PHY_B_P_ASYM_MD; + break; + case SK_FLOW_MODE_SYMMETRIC: + Ctrl3 |= PHY_B_P_SYM_MD; + break; + case SK_FLOW_MODE_SYM_OR_REM: + Ctrl3 |= PHY_B_P_BOTH_MD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, + SKERR_HWI_E016MSG); + } + + /* Restart Auto-negotiation */ + Ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG; + } + + /* Initialize LED register here? */ + /* No. Please do it in SkDgXmitLed() (if required) and swap + init order of LEDs and XMAC. (MAl) */ + + /* Write 1000Base-T Control Register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, Ctrl2); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Set 1000B-T Ctrl Reg=0x%04X\n", Ctrl2)); + + /* Write AutoNeg Advertisement Register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, Ctrl3); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Set Auto-Neg.Adv.Reg=0x%04X\n", Ctrl3)); + + if (DoLoop) { + /* Set the Phy Loopback bit, too */ + Ctrl1 |= PHY_CT_LOOP; + } + + if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) { + /* configure FIFO to high latency for transmission of ext. packets */ + Ctrl4 |= PHY_B_PEC_HIGH_LA; + + /* configure reception of extended packets */ + Ctrl5 |= PHY_B_AC_LONG_PACK; + + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, Ctrl5); + } + + /* Configure LED Traffic Mode and Jumbo Frame usage if specified */ + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, Ctrl4); + + /* Write to the Phy control register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, Ctrl1); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("PHY Control Reg=0x%04X\n", Ctrl1)); +} /* SkXmInitPhyBcom */ +#endif /* GENESIS */ + +#ifdef YUKON +/****************************************************************************** + * + * SkGmInitPhyMarv() - Initialize the Marvell Phy registers + * + * Description: initializes all the Marvell Phy registers + * + * Note: + * + * Returns: + * nothing + */ +static void SkGmInitPhyMarv( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ +{ + SK_GEPORT *pPrt; + SK_U16 PhyCtrl; + SK_U16 C1000BaseT; + SK_U16 AutoNegAdv; + SK_U16 ExtPhyCtrl; + SK_U16 LedCtrl; + SK_BOOL AutoNeg; +#if defined(SK_DIAG) || defined(DEBUG) + SK_U16 PhyStat; + SK_U16 PhyStat1; + SK_U16 PhySpecStat; +#endif /* SK_DIAG || DEBUG */ + + pPrt = &pAC->GIni.GP[Port]; + + /* Auto-negotiation ? */ + if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { + AutoNeg = SK_FALSE; + } + else { + AutoNeg = SK_TRUE; + } + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("InitPhyMarv: Port %d, auto-negotiation %s\n", + Port, AutoNeg ? "ON" : "OFF")); + +#ifdef VCPU + VCPUprintf(0, "SkGmInitPhyMarv(), Port=%u, DoLoop=%u\n", + Port, DoLoop); +#else /* VCPU */ + if (DoLoop) { + /* Set 'MAC Power up'-bit, set Manual MDI configuration */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, + PHY_M_PC_MAC_POW_UP); + } + else if (AutoNeg && pPrt->PLinkSpeed == SK_LSPEED_AUTO) { + /* Read Ext. PHY Specific Control */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl); + + ExtPhyCtrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | + PHY_M_EC_MAC_S_MSK); + + ExtPhyCtrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ) | + PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1); + + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_CTRL, ExtPhyCtrl); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Set Ext. PHY Ctrl=0x%04X\n", ExtPhyCtrl)); + } + + /* Read PHY Control */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl); + + if (!AutoNeg) { + /* Disable Auto-negotiation */ + PhyCtrl &= ~PHY_CT_ANE; + } + + PhyCtrl |= PHY_CT_RESET; + /* Assert software reset */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, PhyCtrl); +#endif /* VCPU */ + + PhyCtrl = 0 /* PHY_CT_COL_TST */; + C1000BaseT = 0; + AutoNegAdv = PHY_SEL_TYPE; + + /* manually Master/Slave ? */ + if (pPrt->PMSMode != SK_MS_MODE_AUTO) { + /* enable Manual Master/Slave */ + C1000BaseT |= PHY_M_1000C_MSE; + + if (pPrt->PMSMode == SK_MS_MODE_MASTER) { + C1000BaseT |= PHY_M_1000C_MSC; /* set it to Master */ + } + } + + /* Auto-negotiation ? */ + if (!AutoNeg) { + + if (pPrt->PLinkMode == SK_LMODE_FULL) { + /* Set Full Duplex Mode */ + PhyCtrl |= PHY_CT_DUP_MD; + } + + /* Set Master/Slave manually if not already done */ + if (pPrt->PMSMode == SK_MS_MODE_AUTO) { + C1000BaseT |= PHY_M_1000C_MSE; /* set it to Slave */ + } + + /* Set Speed */ + switch (pPrt->PLinkSpeed) { + case SK_LSPEED_AUTO: + case SK_LSPEED_1000MBPS: + PhyCtrl |= PHY_CT_SP1000; + break; + case SK_LSPEED_100MBPS: + PhyCtrl |= PHY_CT_SP100; + break; + case SK_LSPEED_10MBPS: + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E019, + SKERR_HWI_E019MSG); + } + + if (!DoLoop) { + PhyCtrl |= PHY_CT_RESET; + } + } + else { + /* Set Auto-negotiation advertisement */ + + if (pAC->GIni.GICopperType) { + /* Set Speed capabilities */ + switch (pPrt->PLinkSpeed) { + case SK_LSPEED_AUTO: + C1000BaseT |= PHY_M_1000C_AHD | PHY_M_1000C_AFD; + AutoNegAdv |= PHY_M_AN_100_FD | PHY_M_AN_100_HD | + PHY_M_AN_10_FD | PHY_M_AN_10_HD; + break; + case SK_LSPEED_1000MBPS: + C1000BaseT |= PHY_M_1000C_AHD | PHY_M_1000C_AFD; + break; + case SK_LSPEED_100MBPS: + AutoNegAdv |= PHY_M_AN_100_FD | PHY_M_AN_100_HD | + /* advertise 10Base-T also */ + PHY_M_AN_10_FD | PHY_M_AN_10_HD; + break; + case SK_LSPEED_10MBPS: + AutoNegAdv |= PHY_M_AN_10_FD | PHY_M_AN_10_HD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E019, + SKERR_HWI_E019MSG); + } + + /* Set Full/half duplex capabilities */ + switch (pPrt->PLinkMode) { + case SK_LMODE_AUTOHALF: + C1000BaseT &= ~PHY_M_1000C_AFD; + AutoNegAdv &= ~(PHY_M_AN_100_FD | PHY_M_AN_10_FD); + break; + case SK_LMODE_AUTOFULL: + C1000BaseT &= ~PHY_M_1000C_AHD; + AutoNegAdv &= ~(PHY_M_AN_100_HD | PHY_M_AN_10_HD); + break; + case SK_LMODE_AUTOBOTH: + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, + SKERR_HWI_E015MSG); + } + + /* Set Flow-control capabilities */ + switch (pPrt->PFlowCtrlMode) { + case SK_FLOW_MODE_NONE: + AutoNegAdv |= PHY_B_P_NO_PAUSE; + break; + case SK_FLOW_MODE_LOC_SEND: + AutoNegAdv |= PHY_B_P_ASYM_MD; + break; + case SK_FLOW_MODE_SYMMETRIC: + AutoNegAdv |= PHY_B_P_SYM_MD; + break; + case SK_FLOW_MODE_SYM_OR_REM: + AutoNegAdv |= PHY_B_P_BOTH_MD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, + SKERR_HWI_E016MSG); + } + } + else { /* special defines for FIBER (88E1011S only) */ + + /* Set Full/half duplex capabilities */ + switch (pPrt->PLinkMode) { + case SK_LMODE_AUTOHALF: + AutoNegAdv |= PHY_M_AN_1000X_AHD; + break; + case SK_LMODE_AUTOFULL: + AutoNegAdv |= PHY_M_AN_1000X_AFD; + break; + case SK_LMODE_AUTOBOTH: + AutoNegAdv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, + SKERR_HWI_E015MSG); + } + + /* Set Flow-control capabilities */ + switch (pPrt->PFlowCtrlMode) { + case SK_FLOW_MODE_NONE: + AutoNegAdv |= PHY_M_P_NO_PAUSE_X; + break; + case SK_FLOW_MODE_LOC_SEND: + AutoNegAdv |= PHY_M_P_ASYM_MD_X; + break; + case SK_FLOW_MODE_SYMMETRIC: + AutoNegAdv |= PHY_M_P_SYM_MD_X; + break; + case SK_FLOW_MODE_SYM_OR_REM: + AutoNegAdv |= PHY_M_P_BOTH_MD_X; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, + SKERR_HWI_E016MSG); + } + } + + if (!DoLoop) { + /* Restart Auto-negotiation */ + PhyCtrl |= PHY_CT_ANE | PHY_CT_RE_CFG; + } + } + +#ifdef VCPU + /* + * E-mail from Gu Lin (08-03-2002): + */ + + /* Program PHY register 30 as 16'h0708 for simulation speed up */ + SkGmPhyWrite(pAC, IoC, Port, 30, 0x0700 /* 0x0708 */); + + VCpuWait(2000); + +#else /* VCPU */ + + /* Write 1000Base-T Control Register */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_1000T_CTRL, C1000BaseT); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Set 1000B-T Ctrl =0x%04X\n", C1000BaseT)); + + /* Write AutoNeg Advertisement Register */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV, AutoNegAdv); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Set Auto-Neg.Adv.=0x%04X\n", AutoNegAdv)); +#endif /* VCPU */ + + if (DoLoop) { + /* Set the PHY Loopback bit */ + PhyCtrl |= PHY_CT_LOOP; + +#ifdef XXX + /* Program PHY register 16 as 16'h0400 to force link good */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, PHY_M_PC_FL_GOOD); +#endif /* XXX */ + +#ifndef VCPU + if (pPrt->PLinkSpeed != SK_LSPEED_AUTO) { + /* Write Ext. PHY Specific Control */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_CTRL, + (SK_U16)((pPrt->PLinkSpeed + 2) << 4)); + } +#endif /* VCPU */ + } +#ifdef TEST_ONLY + else if (pPrt->PLinkSpeed == SK_LSPEED_10MBPS) { + /* Write PHY Specific Control */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_PHY_CTRL, + PHY_M_PC_EN_DET_MSK); + } +#endif + + /* Write to the PHY Control register */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, PhyCtrl); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Set PHY Ctrl Reg.=0x%04X\n", PhyCtrl)); + +#ifdef VCPU + VCpuWait(2000); +#else + + LedCtrl = PHY_M_LED_PULS_DUR(PULS_170MS) | PHY_M_LED_BLINK_RT(BLINK_84MS); + + if ((pAC->GIni.GILedBlinkCtrl & SK_ACT_LED_BLINK) != 0) { + LedCtrl |= PHY_M_LEDC_RX_CTRL | PHY_M_LEDC_TX_CTRL; + } + + if ((pAC->GIni.GILedBlinkCtrl & SK_DUP_LED_NORMAL) != 0) { + LedCtrl |= PHY_M_LEDC_DP_CTRL; + } + + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_LED_CTRL, LedCtrl); + + if ((pAC->GIni.GILedBlinkCtrl & SK_LED_LINK100_ON) != 0) { + /* only in forced 100 Mbps mode */ + if (!AutoNeg && pPrt->PLinkSpeed == SK_LSPEED_100MBPS) { + + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_LED_OVER, + PHY_M_LED_MO_100(MO_LED_ON)); + } + } + +#ifdef SK_DIAG + c_print("Set PHY Ctrl=0x%04X\n", PhyCtrl); + c_print("Set 1000 B-T=0x%04X\n", C1000BaseT); + c_print("Set Auto-Neg=0x%04X\n", AutoNegAdv); + c_print("Set Ext Ctrl=0x%04X\n", ExtPhyCtrl); +#endif /* SK_DIAG */ + +#if defined(SK_DIAG) || defined(DEBUG) + /* Read PHY Control */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("PHY Ctrl Reg.=0x%04X\n", PhyCtrl)); + + /* Read 1000Base-T Control Register */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_CTRL, &C1000BaseT); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("1000B-T Ctrl =0x%04X\n", C1000BaseT)); + + /* Read AutoNeg Advertisement Register */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &AutoNegAdv); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Auto-Neg.Adv.=0x%04X\n", AutoNegAdv)); + + /* Read Ext. PHY Specific Control */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Ext. PHY Ctrl=0x%04X\n", ExtPhyCtrl)); + + /* Read PHY Status */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("PHY Stat Reg.=0x%04X\n", PhyStat)); + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat1); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("PHY Stat Reg.=0x%04X\n", PhyStat1)); + + /* Read PHY Specific Status */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("PHY Spec Stat=0x%04X\n", PhySpecStat)); +#endif /* SK_DIAG || DEBUG */ + +#ifdef SK_DIAG + c_print("PHY Ctrl Reg=0x%04X\n", PhyCtrl); + c_print("PHY 1000 Reg=0x%04X\n", C1000BaseT); + c_print("PHY AnAd Reg=0x%04X\n", AutoNegAdv); + c_print("Ext Ctrl Reg=0x%04X\n", ExtPhyCtrl); + c_print("PHY Stat Reg=0x%04X\n", PhyStat); + c_print("PHY Stat Reg=0x%04X\n", PhyStat1); + c_print("PHY Spec Reg=0x%04X\n", PhySpecStat); +#endif /* SK_DIAG */ + +#endif /* VCPU */ + +} /* SkGmInitPhyMarv */ +#endif /* YUKON */ + + +#ifdef OTHER_PHY +/****************************************************************************** + * + * SkXmInitPhyLone() - Initialize the Level One Phy registers + * + * Description: initializes all the Level One Phy registers + * + * Note: + * + * Returns: + * nothing + */ +static void SkXmInitPhyLone( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ +{ + SK_GEPORT *pPrt; + SK_U16 Ctrl1; + SK_U16 Ctrl2; + SK_U16 Ctrl3; + + Ctrl1 = PHY_CT_SP1000; + Ctrl2 = 0; + Ctrl3 = PHY_SEL_TYPE; + + pPrt = &pAC->GIni.GP[Port]; + + /* manually Master/Slave ? */ + if (pPrt->PMSMode != SK_MS_MODE_AUTO) { + Ctrl2 |= PHY_L_1000C_MSE; + + if (pPrt->PMSMode == SK_MS_MODE_MASTER) { + Ctrl2 |= PHY_L_1000C_MSC; + } + } + /* Auto-negotiation ? */ + if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { + /* + * level one spec say: "1000 Mbps: manual mode not allowed" + * but lets see what happens... + */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("InitPhyLone: no auto-negotiation Port %d\n", Port)); + /* Set DuplexMode in Config register */ + if (pPrt->PLinkMode == SK_LMODE_FULL) { + Ctrl1 |= PHY_CT_DUP_MD; + } + + /* Determine Master/Slave manually if not already done */ + if (pPrt->PMSMode == SK_MS_MODE_AUTO) { + Ctrl2 |= PHY_L_1000C_MSE; /* set it to Slave */ + } + + /* + * Do NOT enable Auto-negotiation here. This would hold + * the link down because no IDLES are transmitted + */ + } + else { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("InitPhyLone: with auto-negotiation Port %d\n", Port)); + /* Set Auto-negotiation advertisement */ + + /* Set Full/half duplex capabilities */ + switch (pPrt->PLinkMode) { + case SK_LMODE_AUTOHALF: + Ctrl2 |= PHY_L_1000C_AHD; + break; + case SK_LMODE_AUTOFULL: + Ctrl2 |= PHY_L_1000C_AFD; + break; + case SK_LMODE_AUTOBOTH: + Ctrl2 |= PHY_L_1000C_AFD | PHY_L_1000C_AHD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, + SKERR_HWI_E015MSG); + } + + /* Set Flow-control capabilities */ + switch (pPrt->PFlowCtrlMode) { + case SK_FLOW_MODE_NONE: + Ctrl3 |= PHY_L_P_NO_PAUSE; + break; + case SK_FLOW_MODE_LOC_SEND: + Ctrl3 |= PHY_L_P_ASYM_MD; + break; + case SK_FLOW_MODE_SYMMETRIC: + Ctrl3 |= PHY_L_P_SYM_MD; + break; + case SK_FLOW_MODE_SYM_OR_REM: + Ctrl3 |= PHY_L_P_BOTH_MD; + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, + SKERR_HWI_E016MSG); + } + + /* Restart Auto-negotiation */ + Ctrl1 = PHY_CT_ANE | PHY_CT_RE_CFG; + } + + /* Write 1000Base-T Control Register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_1000T_CTRL, Ctrl2); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("1000B-T Ctrl Reg=0x%04X\n", Ctrl2)); + + /* Write AutoNeg Advertisement Register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_AUNE_ADV, Ctrl3); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Auto-Neg.Adv.Reg=0x%04X\n", Ctrl3)); + + if (DoLoop) { + /* Set the Phy Loopback bit, too */ + Ctrl1 |= PHY_CT_LOOP; + } + + /* Write to the Phy control register */ + SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_CTRL, Ctrl1); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("PHY Control Reg=0x%04X\n", Ctrl1)); +} /* SkXmInitPhyLone */ + + +/****************************************************************************** + * + * SkXmInitPhyNat() - Initialize the National Phy registers + * + * Description: initializes all the National Phy registers + * + * Note: + * + * Returns: + * nothing + */ +static void SkXmInitPhyNat( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ +{ +/* todo: National */ +} /* SkXmInitPhyNat */ +#endif /* OTHER_PHY */ + + +/****************************************************************************** + * + * SkMacInitPhy() - Initialize the PHY registers + * + * Description: calls the Init PHY routines dep. on board type + * + * Note: + * + * Returns: + * nothing + */ +void SkMacInitPhy( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ +{ + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + switch (pPrt->PhyType) { + case SK_PHY_XMAC: + SkXmInitPhyXmac(pAC, IoC, Port, DoLoop); + break; + case SK_PHY_BCOM: + SkXmInitPhyBcom(pAC, IoC, Port, DoLoop); + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + SkXmInitPhyLone(pAC, IoC, Port, DoLoop); + break; + case SK_PHY_NAT: + SkXmInitPhyNat(pAC, IoC, Port, DoLoop); + break; +#endif /* OTHER_PHY */ + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + SkGmInitPhyMarv(pAC, IoC, Port, DoLoop); + } +#endif /* YUKON */ + +} /* SkMacInitPhy */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmAutoNegDoneXmac() - Auto-negotiation handling + * + * Description: + * This function handles the auto-negotiation if the Done bit is set. + * + * Returns: + * SK_AND_OK o.k. + * SK_AND_DUP_CAP Duplex capability error happened + * SK_AND_OTHER Other error happened + */ +static int SkXmAutoNegDoneXmac( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U16 ResAb; /* Resolved Ability */ + SK_U16 LPAb; /* Link Partner Ability */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegDoneXmac, Port %d\n", Port)); + + pPrt = &pAC->GIni.GP[Port]; + + /* Get PHY parameters */ + SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_AUNE_LP, &LPAb); + SkXmPhyRead(pAC, IoC, Port, PHY_XMAC_RES_ABI, &ResAb); + + if ((LPAb & PHY_X_AN_RFB) != 0) { + /* At least one of the remote fault bit is set */ + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegFail: Remote fault bit set Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + return(SK_AND_OTHER); + } + + /* Check Duplex mismatch */ + if ((ResAb & (PHY_X_RS_HD | PHY_X_RS_FD)) == PHY_X_RS_FD) { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL; + } + else if ((ResAb & (PHY_X_RS_HD | PHY_X_RS_FD)) == PHY_X_RS_HD) { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF; + } + else { + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegFail: Duplex mode mismatch Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + return(SK_AND_DUP_CAP); + } + + /* Check PAUSE mismatch */ + /* We are NOT using chapter 4.23 of the Xaqti manual */ + /* We are using IEEE 802.3z/D5.0 Table 37-4 */ + if ((pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYMMETRIC || + pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM) && + (LPAb & PHY_X_P_SYM_MD) != 0) { + /* Symmetric PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC; + } + else if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_SYM_OR_REM && + (LPAb & PHY_X_RS_PAUSE) == PHY_X_P_ASYM_MD) { + /* Enable PAUSE receive, disable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND; + } + else if (pPrt->PFlowCtrlMode == SK_FLOW_MODE_LOC_SEND && + (LPAb & PHY_X_RS_PAUSE) == PHY_X_P_BOTH_MD) { + /* Disable PAUSE receive, enable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND; + } + else { + /* PAUSE mismatch -> no PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE; + } + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS; + + return(SK_AND_OK); +} /* SkXmAutoNegDoneXmac */ + + +/****************************************************************************** + * + * SkXmAutoNegDoneBcom() - Auto-negotiation handling + * + * Description: + * This function handles the auto-negotiation if the Done bit is set. + * + * Returns: + * SK_AND_OK o.k. + * SK_AND_DUP_CAP Duplex capability error happened + * SK_AND_OTHER Other error happened + */ +static int SkXmAutoNegDoneBcom( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U16 LPAb; /* Link Partner Ability */ + SK_U16 AuxStat; /* Auxiliary Status */ + +#ifdef TEST_ONLY +01-Sep-2000 RA;:;: + SK_U16 ResAb; /* Resolved Ability */ +#endif /* 0 */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegDoneBcom, Port %d\n", Port)); + pPrt = &pAC->GIni.GP[Port]; + + /* Get PHY parameters */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUNE_LP, &LPAb); +#ifdef TEST_ONLY +01-Sep-2000 RA;:;: + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb); +#endif /* 0 */ + + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &AuxStat); + + if ((LPAb & PHY_B_AN_RF) != 0) { + /* Remote fault bit is set: Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegFail: Remote fault bit set Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + return(SK_AND_OTHER); + } + + /* Check Duplex mismatch */ + if ((AuxStat & PHY_B_AS_AN_RES_MSK) == PHY_B_RES_1000FD) { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL; + } + else if ((AuxStat & PHY_B_AS_AN_RES_MSK) == PHY_B_RES_1000HD) { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF; + } + else { + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegFail: Duplex mode mismatch Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + return(SK_AND_DUP_CAP); + } + +#ifdef TEST_ONLY +01-Sep-2000 RA;:;: + /* Check Master/Slave resolution */ + if ((ResAb & PHY_B_1000S_MSF) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Master/Slave Fault Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + pPrt->PMSStatus = SK_MS_STAT_FAULT; + return(SK_AND_OTHER); + } + + pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? + SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; +#endif /* 0 */ + + /* Check PAUSE mismatch ??? */ + /* We are using IEEE 802.3z/D5.0 Table 37-4 */ + if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PAUSE_MSK) { + /* Symmetric PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC; + } + else if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PRR) { + /* Enable PAUSE receive, disable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND; + } + else if ((AuxStat & PHY_B_AS_PAUSE_MSK) == PHY_B_AS_PRT) { + /* Disable PAUSE receive, enable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND; + } + else { + /* PAUSE mismatch -> no PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE; + } + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS; + + return(SK_AND_OK); +} /* SkXmAutoNegDoneBcom */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkGmAutoNegDoneMarv() - Auto-negotiation handling + * + * Description: + * This function handles the auto-negotiation if the Done bit is set. + * + * Returns: + * SK_AND_OK o.k. + * SK_AND_DUP_CAP Duplex capability error happened + * SK_AND_OTHER Other error happened + */ +static int SkGmAutoNegDoneMarv( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U16 LPAb; /* Link Partner Ability */ + SK_U16 ResAb; /* Resolved Ability */ + SK_U16 AuxStat; /* Auxiliary Status */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegDoneMarv, Port %d\n", Port)); + pPrt = &pAC->GIni.GP[Port]; + + /* Get PHY parameters */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_LP, &LPAb); + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Link P.Abil.=0x%04X\n", LPAb)); + + if ((LPAb & PHY_M_AN_RF) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegFail: Remote fault bit set Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + return(SK_AND_OTHER); + } + + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb); + + /* Check Master/Slave resolution */ + if ((ResAb & PHY_B_1000S_MSF) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Master/Slave Fault Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + pPrt->PMSStatus = SK_MS_STAT_FAULT; + return(SK_AND_OTHER); + } + + pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? + (SK_U8)SK_MS_STAT_MASTER : (SK_U8)SK_MS_STAT_SLAVE; + + /* Read PHY Specific Status */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &AuxStat); + + /* Check Speed & Duplex resolved */ + if ((AuxStat & PHY_M_PS_SPDUP_RES) == 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegFail: Speed & Duplex not resolved, Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN; + return(SK_AND_DUP_CAP); + } + + if ((AuxStat & PHY_M_PS_FULL_DUP) != 0) { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL; + } + else { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF; + } + + /* Check PAUSE mismatch ??? */ + /* We are using IEEE 802.3z/D5.0 Table 37-4 */ + if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_PAUSE_MSK) { + /* Symmetric PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC; + } + else if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_RX_P_EN) { + /* Enable PAUSE receive, disable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND; + } + else if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_TX_P_EN) { + /* Disable PAUSE receive, enable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND; + } + else { + /* PAUSE mismatch -> no PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE; + } + + /* set used link speed */ + switch ((unsigned)(AuxStat & PHY_M_PS_SPEED_MSK)) { + case (unsigned)PHY_M_PS_SPEED_1000: + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_1000MBPS; + break; + case PHY_M_PS_SPEED_100: + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_100MBPS; + break; + default: + pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_10MBPS; + } + + return(SK_AND_OK); +} /* SkGmAutoNegDoneMarv */ +#endif /* YUKON */ + + +#ifdef OTHER_PHY +/****************************************************************************** + * + * SkXmAutoNegDoneLone() - Auto-negotiation handling + * + * Description: + * This function handles the auto-negotiation if the Done bit is set. + * + * Returns: + * SK_AND_OK o.k. + * SK_AND_DUP_CAP Duplex capability error happened + * SK_AND_OTHER Other error happened + */ +static int SkXmAutoNegDoneLone( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U16 ResAb; /* Resolved Ability */ + SK_U16 LPAb; /* Link Partner Ability */ + SK_U16 QuickStat; /* Auxiliary Status */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegDoneLone, Port %d\n", Port)); + pPrt = &pAC->GIni.GP[Port]; + + /* Get PHY parameters */ + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_AUNE_LP, &LPAb); + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_1000T_STAT, &ResAb); + SkXmPhyRead(pAC, IoC, Port, PHY_LONE_Q_STAT, &QuickStat); + + if ((LPAb & PHY_L_AN_RF) != 0) { + /* Remote fault bit is set */ + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegFail: Remote fault bit set Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + return(SK_AND_OTHER); + } + + /* Check Duplex mismatch */ + if ((QuickStat & PHY_L_QS_DUP_MOD) != 0) { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOFULL; + } + else { + pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_AUTOHALF; + } + + /* Check Master/Slave resolution */ + if ((ResAb & PHY_L_1000S_MSF) != 0) { + /* Error */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("Master/Slave Fault Port %d\n", Port)); + pPrt->PAutoNegFail = SK_TRUE; + pPrt->PMSStatus = SK_MS_STAT_FAULT; + return(SK_AND_OTHER); + } + else if (ResAb & PHY_L_1000S_MSR) { + pPrt->PMSStatus = SK_MS_STAT_MASTER; + } + else { + pPrt->PMSStatus = SK_MS_STAT_SLAVE; + } + + /* Check PAUSE mismatch */ + /* We are using IEEE 802.3z/D5.0 Table 37-4 */ + /* we must manually resolve the abilities here */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE; + + switch (pPrt->PFlowCtrlMode) { + case SK_FLOW_MODE_NONE: + /* default */ + break; + case SK_FLOW_MODE_LOC_SEND: + if ((QuickStat & (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) == + (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) { + /* Disable PAUSE receive, enable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_LOC_SEND; + } + break; + case SK_FLOW_MODE_SYMMETRIC: + if ((QuickStat & PHY_L_QS_PAUSE) != 0) { + /* Symmetric PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC; + } + break; + case SK_FLOW_MODE_SYM_OR_REM: + if ((QuickStat & (PHY_L_QS_PAUSE | PHY_L_QS_AS_PAUSE)) == + PHY_L_QS_AS_PAUSE) { + /* Enable PAUSE receive, disable PAUSE transmit */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_REM_SEND; + } + else if ((QuickStat & PHY_L_QS_PAUSE) != 0) { + /* Symmetric PAUSE */ + pPrt->PFlowCtrlStatus = SK_FLOW_STAT_SYMMETRIC; + } + break; + default: + SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, + SKERR_HWI_E016MSG); + } + + return(SK_AND_OK); +} /* SkXmAutoNegDoneLone */ + + +/****************************************************************************** + * + * SkXmAutoNegDoneNat() - Auto-negotiation handling + * + * Description: + * This function handles the auto-negotiation if the Done bit is set. + * + * Returns: + * SK_AND_OK o.k. + * SK_AND_DUP_CAP Duplex capability error happened + * SK_AND_OTHER Other error happened + */ +static int SkXmAutoNegDoneNat( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ +/* todo: National */ + return(SK_AND_OK); +} /* SkXmAutoNegDoneNat */ +#endif /* OTHER_PHY */ + + +/****************************************************************************** + * + * SkMacAutoNegDone() - Auto-negotiation handling + * + * Description: calls the auto-negotiation done routines dep. on board type + * + * Returns: + * SK_AND_OK o.k. + * SK_AND_DUP_CAP Duplex capability error happened + * SK_AND_OTHER Other error happened + */ +int SkMacAutoNegDone( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + int Rtv; + + Rtv = SK_AND_OK; + + pPrt = &pAC->GIni.GP[Port]; + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + switch (pPrt->PhyType) { + + case SK_PHY_XMAC: + Rtv = SkXmAutoNegDoneXmac(pAC, IoC, Port); + break; + case SK_PHY_BCOM: + Rtv = SkXmAutoNegDoneBcom(pAC, IoC, Port); + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + Rtv = SkXmAutoNegDoneLone(pAC, IoC, Port); + break; + case SK_PHY_NAT: + Rtv = SkXmAutoNegDoneNat(pAC, IoC, Port); + break; +#endif /* OTHER_PHY */ + default: + return(SK_AND_OTHER); + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + Rtv = SkGmAutoNegDoneMarv(pAC, IoC, Port); + } +#endif /* YUKON */ + + if (Rtv != SK_AND_OK) { + return(Rtv); + } + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNeg done Port %d\n", Port)); + + /* We checked everything and may now enable the link */ + pPrt->PAutoNegFail = SK_FALSE; + + SkMacRxTxEnable(pAC, IoC, Port); + + return(SK_AND_OK); +} /* SkMacAutoNegDone */ + + +/****************************************************************************** + * + * SkMacRxTxEnable() - Enable Rx/Tx activity if port is up + * + * Description: enables Rx/Tx dep. on board type + * + * Returns: + * 0 o.k. + * != 0 Error happened + */ +int SkMacRxTxEnable( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U16 Reg; /* 16-bit register value */ + SK_U16 IntMask; /* MAC interrupt mask */ +#ifdef GENESIS + SK_U16 SWord; +#endif + + pPrt = &pAC->GIni.GP[Port]; + + if (!pPrt->PHWLinkUp) { + /* The Hardware link is NOT up */ + return(0); + } + + if ((pPrt->PLinkMode == SK_LMODE_AUTOHALF || + pPrt->PLinkMode == SK_LMODE_AUTOFULL || + pPrt->PLinkMode == SK_LMODE_AUTOBOTH) && + pPrt->PAutoNegFail) { + /* Auto-negotiation is not done or failed */ + return(0); + } + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* set Duplex Mode and Pause Mode */ + SkXmInitDupMd(pAC, IoC, Port); + + SkXmInitPauseMd(pAC, IoC, Port); + + /* + * Initialize the Interrupt Mask Register. Default IRQs are... + * - Link Asynchronous Event + * - Link Partner requests config + * - Auto Negotiation Done + * - Rx Counter Event Overflow + * - Tx Counter Event Overflow + * - Transmit FIFO Underrun + */ + IntMask = XM_DEF_MSK; + +#ifdef DEBUG + /* add IRQ for Receive FIFO Overflow */ + IntMask &= ~XM_IS_RXF_OV; +#endif /* DEBUG */ + + if (pPrt->PhyType != SK_PHY_XMAC) { + /* disable GP0 interrupt bit */ + IntMask |= XM_IS_INP_ASS; + } + XM_OUT16(IoC, Port, XM_IMSK, IntMask); + + /* get MMU Command Reg. */ + XM_IN16(IoC, Port, XM_MMU_CMD, &Reg); + + if (pPrt->PhyType != SK_PHY_XMAC && + (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL || + pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL)) { + /* set to Full Duplex */ + Reg |= XM_MMU_GMII_FD; + } + + switch (pPrt->PhyType) { + case SK_PHY_BCOM: + /* + * Workaround BCOM Errata (#10523) for all BCom Phys + * Enable Power Management after link up + */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &SWord); + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, + (SK_U16)(SWord & ~PHY_B_AC_DIS_PM)); + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, + (SK_U16)PHY_B_DEF_MSK); + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, PHY_L_DEF_MSK); + break; + case SK_PHY_NAT: + /* todo National: + SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, PHY_N_DEF_MSK); */ + /* no interrupts possible from National ??? */ + break; +#endif /* OTHER_PHY */ + } + + /* enable Rx/Tx */ + XM_OUT16(IoC, Port, XM_MMU_CMD, Reg | XM_MMU_ENA_RX | XM_MMU_ENA_TX); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* + * Initialize the Interrupt Mask Register. Default IRQs are... + * - Rx Counter Event Overflow + * - Tx Counter Event Overflow + * - Transmit FIFO Underrun + */ + IntMask = GMAC_DEF_MSK; + +#ifdef DEBUG + /* add IRQ for Receive FIFO Overrun */ + IntMask |= GM_IS_RX_FF_OR; +#endif /* DEBUG */ + + SK_OUT8(IoC, GMAC_IRQ_MSK, (SK_U8)IntMask); + + /* get General Purpose Control */ + GM_IN16(IoC, Port, GM_GP_CTRL, &Reg); + + if (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL || + pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL) { + /* set to Full Duplex */ + Reg |= GM_GPCR_DUP_FULL; + } + + /* enable Rx/Tx */ + GM_OUT16(IoC, Port, GM_GP_CTRL, (SK_U16)(Reg | GM_GPCR_RX_ENA | + GM_GPCR_TX_ENA)); + +#ifndef VCPU + /* Enable all PHY interrupts */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, + (SK_U16)PHY_M_DEF_MSK); +#endif /* VCPU */ + } +#endif /* YUKON */ + + return(0); + +} /* SkMacRxTxEnable */ + + +/****************************************************************************** + * + * SkMacRxTxDisable() - Disable Receiver and Transmitter + * + * Description: disables Rx/Tx dep. on board type + * + * Returns: N/A + */ +void SkMacRxTxDisable( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U16 Word; + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + XM_IN16(IoC, Port, XM_MMU_CMD, &Word); + + XM_OUT16(IoC, Port, XM_MMU_CMD, Word & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX)); + + /* dummy read to ensure writing */ + XM_IN16(IoC, Port, XM_MMU_CMD, &Word); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + + GM_IN16(IoC, Port, GM_GP_CTRL, &Word); + + GM_OUT16(IoC, Port, GM_GP_CTRL, (SK_U16)(Word & ~(GM_GPCR_RX_ENA | + GM_GPCR_TX_ENA))); + + /* dummy read to ensure writing */ + GM_IN16(IoC, Port, GM_GP_CTRL, &Word); + } +#endif /* YUKON */ + +} /* SkMacRxTxDisable */ + + +/****************************************************************************** + * + * SkMacIrqDisable() - Disable IRQ from MAC + * + * Description: sets the IRQ-mask to disable IRQ dep. on board type + * + * Returns: N/A + */ +void SkMacIrqDisable( +SK_AC *pAC, /* Adapter Context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; +#ifdef GENESIS + SK_U16 Word; +#endif + + pPrt = &pAC->GIni.GP[Port]; + +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + + /* disable all XMAC IRQs */ + XM_OUT16(IoC, Port, XM_IMSK, 0xffff); + + /* Disable all PHY interrupts */ + switch (pPrt->PhyType) { + case SK_PHY_BCOM: + /* Make sure that PHY is initialized */ + if (pPrt->PState != SK_PRT_RESET) { + /* NOT allowed if BCOM is in RESET state */ + /* Workaround BCOM Errata (#10523) all BCom */ + /* Disable Power Management if link is down */ + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &Word); + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, + (SK_U16)(Word | PHY_B_AC_DIS_PM)); + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_INT_MASK, 0xffff); + } + break; +#ifdef OTHER_PHY + case SK_PHY_LONE: + SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_INT_ENAB, 0); + break; + case SK_PHY_NAT: + /* todo: National + SkXmPhyWrite(pAC, IoC, Port, PHY_NAT_INT_MASK, 0xffff); */ + break; +#endif /* OTHER_PHY */ + } + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* disable all GMAC IRQs */ + SK_OUT8(IoC, GMAC_IRQ_MSK, 0); + +#ifndef VCPU + /* Disable all PHY interrupts */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0); +#endif /* VCPU */ + } +#endif /* YUKON */ + +} /* SkMacIrqDisable */ + + +#ifdef SK_DIAG +/****************************************************************************** + * + * SkXmSendCont() - Enable / Disable Send Continuous Mode + * + * Description: enable / disable Send Continuous Mode on XMAC + * + * Returns: + * nothing + */ +void SkXmSendCont( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL Enable) /* Enable / Disable */ +{ + SK_U32 MdReg; + + XM_IN32(IoC, Port, XM_MODE, &MdReg); + + if (Enable) { + MdReg |= XM_MD_TX_CONT; + } + else { + MdReg &= ~XM_MD_TX_CONT; + } + /* setup Mode Register */ + XM_OUT32(IoC, Port, XM_MODE, MdReg); + +} /* SkXmSendCont */ + + +/****************************************************************************** + * + * SkMacTimeStamp() - Enable / Disable Time Stamp + * + * Description: enable / disable Time Stamp generation for Rx packets + * + * Returns: + * nothing + */ +void SkMacTimeStamp( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL Enable) /* Enable / Disable */ +{ + SK_U32 MdReg; + SK_U8 TimeCtrl; + + if (pAC->GIni.GIGenesis) { + + XM_IN32(IoC, Port, XM_MODE, &MdReg); + + if (Enable) { + MdReg |= XM_MD_ATS; + } + else { + MdReg &= ~XM_MD_ATS; + } + /* setup Mode Register */ + XM_OUT32(IoC, Port, XM_MODE, MdReg); + } + else { + if (Enable) { + TimeCtrl = GMT_ST_START | GMT_ST_CLR_IRQ; + } + else { + TimeCtrl = GMT_ST_STOP | GMT_ST_CLR_IRQ; + } + /* Start/Stop Time Stamp Timer */ + SK_OUT8(IoC, GMAC_TI_ST_CTRL, TimeCtrl); + } + +} /* SkMacTimeStamp*/ + +#else /* !SK_DIAG */ + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmAutoNegLipaXmac() - Decides whether Link Partner could do auto-neg + * + * This function analyses the Interrupt status word. If any of the + * Auto-negotiating interrupt bits are set, the PLipaAutoNeg variable + * is set true. + */ +void SkXmAutoNegLipaXmac( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_U16 IStatus) /* Interrupt Status word to analyse */ +{ + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PLipaAutoNeg != SK_LIPA_AUTO && + (IStatus & (XM_IS_LIPA_RC | XM_IS_RX_PAGE | XM_IS_AND)) != 0) { + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegLipa: AutoNeg detected on Port %d, IStatus=0x%04X\n", + Port, IStatus)); + pPrt->PLipaAutoNeg = SK_LIPA_AUTO; + } +} /* SkXmAutoNegLipaXmac */ +#endif /* GENESIS */ + + +/****************************************************************************** + * + * SkMacAutoNegLipaPhy() - Decides whether Link Partner could do auto-neg + * + * This function analyses the PHY status word. + * If any of the Auto-negotiating bits are set, the PLipaAutoNeg variable + * is set true. + */ +void SkMacAutoNegLipaPhy( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_U16 PhyStat) /* PHY Status word to analyse */ +{ + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PLipaAutoNeg != SK_LIPA_AUTO && + (PhyStat & PHY_ST_AN_OVER) != 0) { + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("AutoNegLipa: AutoNeg detected on Port %d, PhyStat=0x%04X\n", + Port, PhyStat)); + pPrt->PLipaAutoNeg = SK_LIPA_AUTO; + } +} /* SkMacAutoNegLipaPhy */ + + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmIrq() - Interrupt Service Routine + * + * Description: services an Interrupt Request of the XMAC + * + * Note: + * With an external PHY, some interrupt bits are not meaningfull any more: + * - LinkAsyncEvent (bit #14) XM_IS_LNK_AE + * - LinkPartnerReqConfig (bit #10) XM_IS_LIPA_RC + * - Page Received (bit #9) XM_IS_RX_PAGE + * - NextPageLoadedForXmt (bit #8) XM_IS_TX_PAGE + * - AutoNegDone (bit #7) XM_IS_AND + * Also probably not valid any more is the GP0 input bit: + * - GPRegisterBit0set XM_IS_INP_ASS + * + * Returns: + * nothing + */ +static void SkXmIrq( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_EVPARA Para; + SK_U16 IStatus; /* Interrupt status read from the XMAC */ + SK_U16 IStatus2; +#ifdef SK_SLIM + SK_U64 OverflowStatus; +#endif + + pPrt = &pAC->GIni.GP[Port]; + + XM_IN16(IoC, Port, XM_ISRC, &IStatus); + + /* LinkPartner Auto-negable? */ + if (pPrt->PhyType == SK_PHY_XMAC) { + SkXmAutoNegLipaXmac(pAC, IoC, Port, IStatus); + } + else { + /* mask bits that are not used with ext. PHY */ + IStatus &= ~(XM_IS_LNK_AE | XM_IS_LIPA_RC | + XM_IS_RX_PAGE | XM_IS_TX_PAGE | + XM_IS_AND | XM_IS_INP_ASS); + } + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("XmacIrq Port %d Isr 0x%04X\n", Port, IStatus)); + + if (!pPrt->PHWLinkUp) { + /* Spurious XMAC interrupt */ + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("SkXmIrq: spurious interrupt on Port %d\n", Port)); + return; + } + + if ((IStatus & XM_IS_INP_ASS) != 0) { + /* Reread ISR Register if link is not in sync */ + XM_IN16(IoC, Port, XM_ISRC, &IStatus2); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("SkXmIrq: Link async. Double check Port %d 0x%04X 0x%04X\n", + Port, IStatus, IStatus2)); + IStatus &= ~XM_IS_INP_ASS; + IStatus |= IStatus2; + } + + if ((IStatus & XM_IS_LNK_AE) != 0) { + /* not used, GP0 is used instead */ + } + + if ((IStatus & XM_IS_TX_ABORT) != 0) { + /* not used */ + } + + if ((IStatus & XM_IS_FRC_INT) != 0) { + /* not used, use ASIC IRQ instead if needed */ + } + + if ((IStatus & (XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE)) != 0) { + SkHWLinkDown(pAC, IoC, Port); + + /* Signal to RLMT */ + Para.Para32[0] = (SK_U32)Port; + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); + + /* Start workaround Errata #2 timer */ + SkTimerStart(pAC, IoC, &pPrt->PWaTimer, SK_WA_INA_TIME, + SKGE_HWAC, SK_HWEV_WATIM, Para); + } + + if ((IStatus & XM_IS_RX_PAGE) != 0) { + /* not used */ + } + + if ((IStatus & XM_IS_TX_PAGE) != 0) { + /* not used */ + } + + if ((IStatus & XM_IS_AND) != 0) { + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("SkXmIrq: AND on link that is up Port %d\n", Port)); + } + + if ((IStatus & XM_IS_TSC_OV) != 0) { + /* not used */ + } + + /* Combined Tx & Rx Counter Overflow SIRQ Event */ + if ((IStatus & (XM_IS_RXC_OV | XM_IS_TXC_OV)) != 0) { +#ifdef SK_SLIM + SkXmOverflowStatus(pAC, IoC, Port, IStatus, &OverflowStatus); +#else + Para.Para32[0] = (SK_U32)Port; + Para.Para32[1] = (SK_U32)IStatus; + SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_SIRQ_OVERFLOW, Para); +#endif /* SK_SLIM */ + } + + if ((IStatus & XM_IS_RXF_OV) != 0) { + /* normal situation -> no effect */ +#ifdef DEBUG + pPrt->PRxOverCnt++; +#endif /* DEBUG */ + } + + if ((IStatus & XM_IS_TXF_UR) != 0) { + /* may NOT happen -> error log */ + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E020, SKERR_SIRQ_E020MSG); + } + + if ((IStatus & XM_IS_TX_COMP) != 0) { + /* not served here */ + } + + if ((IStatus & XM_IS_RX_COMP) != 0) { + /* not served here */ + } +} /* SkXmIrq */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkGmIrq() - Interrupt Service Routine + * + * Description: services an Interrupt Request of the GMAC + * + * Note: + * + * Returns: + * nothing + */ +static void SkGmIrq( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U8 IStatus; /* Interrupt status */ +#ifdef SK_SLIM + SK_U64 OverflowStatus; +#else + SK_EVPARA Para; +#endif + + pPrt = &pAC->GIni.GP[Port]; + + SK_IN8(IoC, GMAC_IRQ_SRC, &IStatus); + +#ifdef XXX + /* LinkPartner Auto-negable? */ + SkMacAutoNegLipaPhy(pAC, IoC, Port, IStatus); +#endif /* XXX */ + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, + ("GmacIrq Port %d Isr 0x%04X\n", Port, IStatus)); + + /* Combined Tx & Rx Counter Overflow SIRQ Event */ + if (IStatus & (GM_IS_RX_CO_OV | GM_IS_TX_CO_OV)) { + /* these IRQs will be cleared by reading GMACs register */ +#ifdef SK_SLIM + SkGmOverflowStatus(pAC, IoC, Port, IStatus, &OverflowStatus); +#else + Para.Para32[0] = (SK_U32)Port; + Para.Para32[1] = (SK_U32)IStatus; + SkPnmiEvent(pAC, IoC, SK_PNMI_EVT_SIRQ_OVERFLOW, Para); +#endif + } + + if (IStatus & GM_IS_RX_FF_OR) { + /* clear GMAC Rx FIFO Overrun IRQ */ + SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_CLI_RX_FO); +#ifdef DEBUG + pPrt->PRxOverCnt++; +#endif /* DEBUG */ + } + + if (IStatus & GM_IS_TX_FF_UR) { + /* clear GMAC Tx FIFO Underrun IRQ */ + SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_CLI_TX_FU); + /* may NOT happen -> error log */ + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E020, SKERR_SIRQ_E020MSG); + } + + if (IStatus & GM_IS_TX_COMPL) { + /* not served here */ + } + + if (IStatus & GM_IS_RX_COMPL) { + /* not served here */ + } +} /* SkGmIrq */ +#endif /* YUKON */ + + +/****************************************************************************** + * + * SkMacIrq() - Interrupt Service Routine for MAC + * + * Description: calls the Interrupt Service Routine dep. on board type + * + * Returns: + * nothing + */ +void SkMacIrq( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port) /* Port Index (MAC_1 + n) */ +{ +#ifdef GENESIS + if (pAC->GIni.GIGenesis) { + /* IRQ from XMAC */ + SkXmIrq(pAC, IoC, Port); + } +#endif /* GENESIS */ + +#ifdef YUKON + if (pAC->GIni.GIYukon) { + /* IRQ from GMAC */ + SkGmIrq(pAC, IoC, Port); + } +#endif /* YUKON */ + +} /* SkMacIrq */ + +#endif /* !SK_DIAG */ + +#ifdef GENESIS +/****************************************************************************** + * + * SkXmUpdateStats() - Force the XMAC to output the current statistic + * + * Description: + * The XMAC holds its statistic internally. To obtain the current + * values a command must be sent so that the statistic data will + * be written to a predefined memory area on the adapter. + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkXmUpdateStats( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port) /* Port Index (MAC_1 + n) */ +{ + SK_GEPORT *pPrt; + SK_U16 StatReg; + int WaitIndex; + + pPrt = &pAC->GIni.GP[Port]; + WaitIndex = 0; + + /* Send an update command to XMAC specified */ + XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_SNP_TXC | XM_SC_SNP_RXC); + + /* + * It is an auto-clearing register. If the command bits + * went to zero again, the statistics are transferred. + * Normally the command should be executed immediately. + * But just to be sure we execute a loop. + */ + do { + + XM_IN16(IoC, Port, XM_STAT_CMD, &StatReg); + + if (++WaitIndex > 10) { + + SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E021, SKERR_HWI_E021MSG); + + return(1); + } + } while ((StatReg & (XM_SC_SNP_TXC | XM_SC_SNP_RXC)) != 0); + + return(0); +} /* SkXmUpdateStats */ + + +/****************************************************************************** + * + * SkXmMacStatistic() - Get XMAC counter value + * + * Description: + * Gets the 32bit counter value. Except for the octet counters + * the lower 32bit are counted in hardware and the upper 32bit + * must be counted in software by monitoring counter overflow interrupts. + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkXmMacStatistic( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port, /* Port Index (MAC_1 + n) */ +SK_U16 StatAddr, /* MIB counter base address */ +SK_U32 SK_FAR *pVal) /* ptr to return statistic value */ +{ + if ((StatAddr < XM_TXF_OK) || (StatAddr > XM_RXF_MAX_SZ)) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG); + + return(1); + } + + XM_IN32(IoC, Port, StatAddr, pVal); + + return(0); +} /* SkXmMacStatistic */ + + +/****************************************************************************** + * + * SkXmResetCounter() - Clear MAC statistic counter + * + * Description: + * Force the XMAC to clear its statistic counter. + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkXmResetCounter( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port) /* Port Index (MAC_1 + n) */ +{ + XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_CLR_RXC | XM_SC_CLR_TXC); + /* Clear two times according to Errata #3 */ + XM_OUT16(IoC, Port, XM_STAT_CMD, XM_SC_CLR_RXC | XM_SC_CLR_TXC); + + return(0); +} /* SkXmResetCounter */ + + +/****************************************************************************** + * + * SkXmOverflowStatus() - Gets the status of counter overflow interrupt + * + * Description: + * Checks the source causing an counter overflow interrupt. On success the + * resulting counter overflow status is written to , whereas the + * upper dword stores the XMAC ReceiveCounterEvent register and the lower + * dword the XMAC TransmitCounterEvent register. + * + * Note: + * For XMAC the interrupt source is a self-clearing register, so the source + * must be checked only once. SIRQ module does another check to be sure + * that no interrupt get lost during process time. + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkXmOverflowStatus( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port, /* Port Index (MAC_1 + n) */ +SK_U16 IStatus, /* Interupt Status from MAC */ +SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */ +{ + SK_U64 Status; /* Overflow status */ + SK_U32 RegVal; + + Status = 0; + + if ((IStatus & XM_IS_RXC_OV) != 0) { + + XM_IN32(IoC, Port, XM_RX_CNT_EV, &RegVal); + Status |= (SK_U64)RegVal << 32; + } + + if ((IStatus & XM_IS_TXC_OV) != 0) { + + XM_IN32(IoC, Port, XM_TX_CNT_EV, &RegVal); + Status |= (SK_U64)RegVal; + } + + *pStatus = Status; + + return(0); +} /* SkXmOverflowStatus */ +#endif /* GENESIS */ + + +#ifdef YUKON +/****************************************************************************** + * + * SkGmUpdateStats() - Force the GMAC to output the current statistic + * + * Description: + * Empty function for GMAC. Statistic data is accessible in direct way. + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkGmUpdateStats( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port) /* Port Index (MAC_1 + n) */ +{ + return(0); +} + + +/****************************************************************************** + * + * SkGmMacStatistic() - Get GMAC counter value + * + * Description: + * Gets the 32bit counter value. Except for the octet counters + * the lower 32bit are counted in hardware and the upper 32bit + * must be counted in software by monitoring counter overflow interrupts. + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkGmMacStatistic( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port, /* Port Index (MAC_1 + n) */ +SK_U16 StatAddr, /* MIB counter base address */ +SK_U32 SK_FAR *pVal) /* ptr to return statistic value */ +{ + + if ((StatAddr < GM_RXF_UC_OK) || (StatAddr > GM_TXE_FIFO_UR)) { + + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("SkGmMacStat: wrong MIB counter 0x%04X\n", StatAddr)); + return(1); + } + + GM_IN32(IoC, Port, StatAddr, pVal); + + return(0); +} /* SkGmMacStatistic */ + + +/****************************************************************************** + * + * SkGmResetCounter() - Clear MAC statistic counter + * + * Description: + * Force GMAC to clear its statistic counter. + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkGmResetCounter( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port) /* Port Index (MAC_1 + n) */ +{ + SK_U16 Reg; /* Phy Address Register */ + SK_U16 Word; + int i; + + GM_IN16(IoC, Port, GM_PHY_ADDR, &Reg); + + /* set MIB Clear Counter Mode */ + GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg | GM_PAR_MIB_CLR); + + /* read all MIB Counters with Clear Mode set */ + for (i = 0; i < GM_MIB_CNT_SIZE; i++) { + /* the reset is performed only when the lower 16 bits are read */ + GM_IN16(IoC, Port, GM_MIB_CNT_BASE + 8*i, &Word); + } + + /* clear MIB Clear Counter Mode */ + GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg); + + return(0); +} /* SkGmResetCounter */ + + +/****************************************************************************** + * + * SkGmOverflowStatus() - Gets the status of counter overflow interrupt + * + * Description: + * Checks the source causing an counter overflow interrupt. On success the + * resulting counter overflow status is written to , whereas the + * the following bit coding is used: + * 63:56 - unused + * 55:48 - TxRx interrupt register bit7:0 + * 32:47 - Rx interrupt register + * 31:24 - unused + * 23:16 - TxRx interrupt register bit15:8 + * 15:0 - Tx interrupt register + * + * Returns: + * 0: success + * 1: something went wrong + */ +int SkGmOverflowStatus( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +unsigned int Port, /* Port Index (MAC_1 + n) */ +SK_U16 IStatus, /* Interupt Status from MAC */ +SK_U64 SK_FAR *pStatus) /* ptr for return overflow status value */ +{ + SK_U64 Status; /* Overflow status */ + SK_U16 RegVal; + + Status = 0; + + if ((IStatus & GM_IS_RX_CO_OV) != 0) { + /* this register is self-clearing after read */ + GM_IN16(IoC, Port, GM_RX_IRQ_SRC, &RegVal); + Status |= (SK_U64)RegVal << 32; + } + + if ((IStatus & GM_IS_TX_CO_OV) != 0) { + /* this register is self-clearing after read */ + GM_IN16(IoC, Port, GM_TX_IRQ_SRC, &RegVal); + Status |= (SK_U64)RegVal; + } + + /* this register is self-clearing after read */ + GM_IN16(IoC, Port, GM_TR_IRQ_SRC, &RegVal); + /* Rx overflow interrupt register bits (LoByte)*/ + Status |= (SK_U64)((SK_U8)RegVal) << 48; + /* Tx overflow interrupt register bits (HiByte)*/ + Status |= (SK_U64)(RegVal >> 8) << 16; + + *pStatus = Status; + + return(0); +} /* SkGmOverflowStatus */ + + +#ifndef SK_SLIM +/****************************************************************************** + * + * SkGmCableDiagStatus() - Starts / Gets status of cable diagnostic test + * + * Description: + * starts the cable diagnostic test if 'StartTest' is true + * gets the results if 'StartTest' is true + * + * NOTE: this test is meaningful only when link is down + * + * Returns: + * 0: success + * 1: no YUKON copper + * 2: test in progress + */ +int SkGmCableDiagStatus( +SK_AC *pAC, /* adapter context */ +SK_IOC IoC, /* IO context */ +int Port, /* Port Index (MAC_1 + n) */ +SK_BOOL StartTest) /* flag for start / get result */ +{ + int i; + SK_U16 RegVal; + SK_GEPORT *pPrt; + + pPrt = &pAC->GIni.GP[Port]; + + if (pPrt->PhyType != SK_PHY_MARV_COPPER) { + + return(1); + } + + if (StartTest) { + /* only start the cable test */ + if ((pPrt->PhyId1 & PHY_I1_REV_MSK) < 4) { + /* apply TDR workaround from Marvell */ + SkGmPhyWrite(pAC, IoC, Port, 29, 0x001e); + + SkGmPhyWrite(pAC, IoC, Port, 30, 0xcc00); + SkGmPhyWrite(pAC, IoC, Port, 30, 0xc800); + SkGmPhyWrite(pAC, IoC, Port, 30, 0xc400); + SkGmPhyWrite(pAC, IoC, Port, 30, 0xc000); + SkGmPhyWrite(pAC, IoC, Port, 30, 0xc100); + } + + /* set address to 0 for MDI[0] */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, 0); + + /* Read Cable Diagnostic Reg */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal); + + /* start Cable Diagnostic Test */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, + (SK_U16)(RegVal | PHY_M_CABD_ENA_TEST)); + + return(0); + } + + /* Read Cable Diagnostic Reg */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal); + + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, + ("PHY Cable Diag.=0x%04X\n", RegVal)); + + if ((RegVal & PHY_M_CABD_ENA_TEST) != 0) { + /* test is running */ + return(2); + } + + /* get the test results */ + for (i = 0; i < 4; i++) { + /* set address to i for MDI[i] */ + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_ADR, (SK_U16)i); + + /* get Cable Diagnostic values */ + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal); + + pPrt->PMdiPairLen[i] = (SK_U8)(RegVal & PHY_M_CABD_DIST_MSK); + + pPrt->PMdiPairSts[i] = (SK_U8)((RegVal & PHY_M_CABD_STAT_MSK) >> 13); + } + + return(0); +} /* SkGmCableDiagStatus */ +#endif /* !SK_SLIM */ +#endif /* YUKON */ + +/* End of file */ -- cgit v1.2.3-70-g09d2 From fadacb1b80e35e0b36a90d43e21ef91eec4b889b Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Sat, 15 Sep 2007 19:41:43 -0400 Subject: drivers/net/pcmcia/3c589_cs: fix port configuration switcheroo MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 10base2 and 10baseT were accidentally switched. Noticed by Andreas HÃŒbner, forwarded by Alan Cox. Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/3c589_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 503f2685fb7..c06cae3f0b5 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -116,7 +116,7 @@ struct el3_private { spinlock_t lock; }; -static const char *if_names[] = { "auto", "10baseT", "10base2", "AUI" }; +static const char *if_names[] = { "auto", "10base2", "10baseT", "AUI" }; /*====================================================================*/ -- cgit v1.2.3-70-g09d2 From 3be9095063885d482b87d3875ea7f28e635882d0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 16 Sep 2007 15:36:43 +0200 Subject: timekeeping: access rtc outside of xtime lock Lockdep complains about the access of rtc in timekeeping_suspend inside the interrupt disabled region of the write locked xtime lock. Move the access outside. Signed-off-by: Thomas Gleixner Cc: John Stultz --- kernel/time/timekeeping.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index acc417b5a9b..f682091fa89 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -325,9 +325,10 @@ static int timekeeping_suspend(struct sys_device *dev, pm_message_t state) { unsigned long flags; + timekeeping_suspend_time = read_persistent_clock(); + write_seqlock_irqsave(&xtime_lock, flags); timekeeping_suspended = 1; - timekeeping_suspend_time = read_persistent_clock(); write_sequnlock_irqrestore(&xtime_lock, flags); clockevents_notify(CLOCK_EVT_NOTIFY_SUSPEND, NULL); -- cgit v1.2.3-70-g09d2 From 6a669ee8a790487b7ec1edda762d39615a78264b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 16 Sep 2007 15:36:43 +0200 Subject: timekeeping: Prevent time going backwards on resume Timekeeping resume adjusts xtime by adding the slept time in seconds and resets the reference value of the clock source (clock->cycle_last). clock->cycle last is used to calculate the delta between the last xtime update and the readout of the clock source in __get_nsec_offset(). xtime plus the offset is the current time. The resume code ignores the delta which had already elapsed between the last xtime update and the actual time of suspend. If the suspend time is short, then we can see time going backwards on resume. Suspend: offs_s = clock->read() - clock->cycle_last; now = xtime + offs_s; timekeeping_suspend_time = read_rtc(); Resume: sleep_time = read_rtc() - timekeeping_suspend_time; xtime.tv_sec += sleep_time; clock->cycle_last = clock->read(); offs_r = clock->read() - clock->cycle_last; now = xtime + offs_r; if sleep_time_seconds == 0 and offs_r < offs_s, then time goes backwards. Fix this by storing the offset from the last xtime update and add it to xtime during resume, when we reset clock->cycle_last: sleep_time = read_rtc() - timekeeping_suspend_time; xtime.tv_sec += sleep_time; xtime += offs_s; /* Fixup xtime offset at suspend time */ clock->cycle_last = clock->read(); offs_r = clock->read() - clock->cycle_last; now = xtime + offs_r; Thanks to Marcelo for tracking this down on the OLPC and providing the necessary details to analyze the root cause. Signed-off-by: Thomas Gleixner Cc: John Stultz Cc: Tosatti --- kernel/time/timekeeping.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index f682091fa89..4ad79f6bdec 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -217,6 +217,7 @@ static void change_clocksource(void) } #else static inline void change_clocksource(void) { } +static inline s64 __get_nsec_offset(void) { return 0; } #endif /** @@ -280,6 +281,8 @@ void __init timekeeping_init(void) static int timekeeping_suspended; /* time in seconds when suspend began */ static unsigned long timekeeping_suspend_time; +/* xtime offset when we went into suspend */ +static s64 timekeeping_suspend_nsecs; /** * timekeeping_resume - Resumes the generic timekeeping subsystem. @@ -305,6 +308,8 @@ static int timekeeping_resume(struct sys_device *dev) wall_to_monotonic.tv_sec -= sleep_length; total_sleep_time += sleep_length; } + /* Make sure that we have the correct xtime reference */ + timespec_add_ns(&xtime, timekeeping_suspend_nsecs); /* re-base the last cycle value */ clock->cycle_last = clocksource_read(clock); clock->error = 0; @@ -328,6 +333,8 @@ static int timekeeping_suspend(struct sys_device *dev, pm_message_t state) timekeeping_suspend_time = read_persistent_clock(); write_seqlock_irqsave(&xtime_lock, flags); + /* Get the current xtime offset */ + timekeeping_suspend_nsecs = __get_nsec_offset(); timekeeping_suspended = 1; write_sequnlock_irqrestore(&xtime_lock, flags); -- cgit v1.2.3-70-g09d2 From 729c6ba334771f28a54efd7e3b8f5ab9414ce7bc Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Sun, 16 Sep 2007 15:36:43 +0200 Subject: ACPI: Reevaluate C/P/T states when a cpu becomes online Reevaluate C/P/T states when a cpu becomes online. This avoids the caching of the broadcast information in the clockevents layer. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Thomas Gleixner Cc: Len Brown --- drivers/acpi/processor_core.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index e944aaee4e0..2afb3d2086b 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -724,6 +724,25 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) return; } +static int acpi_cpu_soft_notify(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + struct acpi_processor *pr = processors[cpu]; + + if (action == CPU_ONLINE && pr) { + acpi_processor_ppc_has_changed(pr); + acpi_processor_cst_has_changed(pr); + acpi_processor_tstate_has_changed(pr); + } + return NOTIFY_OK; +} + +static struct notifier_block acpi_cpu_notifier = +{ + .notifier_call = acpi_cpu_soft_notify, +}; + static int acpi_processor_add(struct acpi_device *device) { struct acpi_processor *pr = NULL; @@ -987,6 +1006,7 @@ void acpi_processor_install_hotplug_notify(void) ACPI_UINT32_MAX, processor_walk_namespace_cb, &action, NULL); #endif + register_hotcpu_notifier(&acpi_cpu_notifier); } static @@ -999,6 +1019,7 @@ void acpi_processor_uninstall_hotplug_notify(void) ACPI_UINT32_MAX, processor_walk_namespace_cb, &action, NULL); #endif + unregister_hotcpu_notifier(&acpi_cpu_notifier); } /* -- cgit v1.2.3-70-g09d2 From 07eec6af448d13a6a520d9c6f06f2e87f61b567a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 16 Sep 2007 15:36:43 +0200 Subject: clockevents: Enforce oneshot broadcast when broadcast mask is set on resume The jinxed VAIO refuses to resume without hitting keys on the keyboard when this is not enforced. It is unclear why the cpu ends up in a lower C State without notifying the clock events layer, but enforcing the oneshot broadcast here is safe. Signed-off-by: Thomas Gleixner --- kernel/time/tick-broadcast.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index db8e0f3d409..947959fb2bb 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -382,12 +382,23 @@ static int tick_broadcast_set_event(ktime_t expires, int force) int tick_resume_broadcast_oneshot(struct clock_event_device *bc) { + int cpu = smp_processor_id(); + + /* + * If the CPU is marked for broadcast, enforce oneshot + * broadcast mode. The jinxed VAIO does not resume otherwise. + * No idea why it ends up in a lower C State during resume + * without notifying the clock events layer. + */ + if (cpu_isset(cpu, tick_broadcast_mask)) + cpu_set(cpu, tick_broadcast_oneshot_mask); + clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); if(!cpus_empty(tick_broadcast_oneshot_mask)) tick_broadcast_set_event(ktime_get(), 1); - return cpu_isset(smp_processor_id(), tick_broadcast_oneshot_mask); + return cpu_isset(cpu, tick_broadcast_oneshot_mask); } /* -- cgit v1.2.3-70-g09d2 From 31d9b3938c0459e5e9755ce0a98ac1e24eeff972 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 16 Sep 2007 15:36:43 +0200 Subject: clockevents: do not shutdown the oneshot broadcast device When a cpu goes offline it is removed from the broadcast masks. If the mask becomes empty the code shuts down the broadcast device. This is wrong, because the broadcast device needs to be ready for the online cpu going idle (into a c-state, which stops the local apic timer). Signed-off-by: Thomas Gleixner --- kernel/time/tick-broadcast.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 947959fb2bb..aab881c86a1 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -560,20 +560,17 @@ void tick_broadcast_switch_to_oneshot(void) */ void tick_shutdown_broadcast_oneshot(unsigned int *cpup) { - struct clock_event_device *bc; unsigned long flags; unsigned int cpu = *cpup; spin_lock_irqsave(&tick_broadcast_lock, flags); - bc = tick_broadcast_device.evtdev; + /* + * Clear the broadcast mask flag for the dead cpu, but do not + * stop the broadcast device! + */ cpu_clear(cpu, tick_broadcast_oneshot_mask); - if (tick_broadcast_device.mode == TICKDEV_MODE_ONESHOT) { - if (bc && cpus_empty(tick_broadcast_oneshot_mask)) - clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN); - } - spin_unlock_irqrestore(&tick_broadcast_lock, flags); } -- cgit v1.2.3-70-g09d2 From 5e41d0d60a534d2a5dc9772600a58f44c8d12506 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 16 Sep 2007 15:36:43 +0200 Subject: clockevents: prevent stale tick update on offline cpu Taking a cpu offline removes the cpu from the online mask before the CPU_DEAD notification is done. The clock events layer does the cleanup of the dead CPU from the CPU_DEAD notifier chain. tick_do_timer_cpu is used to avoid xtime lock contention by assigning the task of jiffies xtime updates to one CPU. If a CPU is taken offline, then this assignment becomes stale. This went unnoticed because most of the time the offline CPU went dead before the online CPU reached __cpu_die(), where the CPU_DEAD state is checked. In the case that the offline CPU did not reach the DEAD state before we reach __cpu_die(), the code in there goes to sleep for 100ms. Due to the stale time update assignment, the system is stuck forever. Take the assignment away when a cpu is not longer in the cpu_online_mask. We do this in the last call to tick_nohz_stop_sched_tick() when the offline CPU is on the way to the final play_dead() idle entry. Signed-off-by: Thomas Gleixner --- kernel/time/tick-sched.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index b416995b975..8c3fef1db09 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -160,6 +160,18 @@ void tick_nohz_stop_sched_tick(void) cpu = smp_processor_id(); ts = &per_cpu(tick_cpu_sched, cpu); + /* + * If this cpu is offline and it is the one which updates + * jiffies, then give up the assignment and let it be taken by + * the cpu which runs the tick timer next. If we don't drop + * this here the jiffies might be stale and do_timer() never + * invoked. + */ + if (unlikely(!cpu_online(cpu))) { + if (cpu == tick_do_timer_cpu) + tick_do_timer_cpu = -1; + } + if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE)) goto end; -- cgit v1.2.3-70-g09d2 From 58ea1aa07e3cb4674ab0261b45aa1ba68282a79d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 16 Sep 2007 09:52:36 -0700 Subject: [SPARC64]: Update defconfig. Signed-off-by: David S. Miller --- arch/sparc64/defconfig | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index 68338a601f7..7d07297db87 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc1 -# Sun Jul 22 19:24:37 2007 +# Linux kernel version: 2.6.23-rc6 +# Sun Sep 16 09:52:11 2007 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -32,15 +32,11 @@ CONFIG_HZ=100 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y @@ -555,6 +551,7 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=m CONFIG_BNX2=m @@ -809,6 +806,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1162,10 +1160,6 @@ CONFIG_USB_STORAGE=m # CONFIG_MMC is not set # CONFIG_NEW_LEDS is not set # CONFIG_INFINIBAND is not set - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set # -- cgit v1.2.3-70-g09d2 From 301feb652441a7168b59256fc44918075dcab0d5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 16 Sep 2007 11:51:15 -0700 Subject: [SPARC64]: Fix lockdep, particularly on SMP. As noted by Al Viro, when we try to call prom_set_trap_table() in the SMP trampoline code we try to take the PROM call spinlock which doesn't work because the current thread pointer isn't valid yet and lockdep depends upon that being correct. Furthermore, we cannot set the current thread pointer register because it can't be properly dereferenced until we return from prom_set_trap_table(). Kernel TLB misses only work after that call. So do the PROM call to set the trap table directly instead of going through the OBP library C code, and thus avoid the lock altogether. These calls are guarenteed to be serialized fully. Since there are now no calls to the prom_set_trap_table{_sun4v}() library functions, they can be deleted. Signed-off-by: David S. Miller --- arch/sparc64/kernel/head.S | 35 ++++++++++++++++++++++++++++++----- arch/sparc64/kernel/trampoline.S | 33 ++++++++++++++++++++++++++++----- arch/sparc64/prom/misc.c | 16 ---------------- include/asm-sparc64/oplib.h | 4 ---- 4 files changed, 58 insertions(+), 30 deletions(-) diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index 63144ad476f..c4147ad8677 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -98,7 +98,7 @@ sparc64_boot: .globl prom_boot_mapped_pc, prom_boot_mapping_mode .globl prom_boot_mapping_phys_high, prom_boot_mapping_phys_low .globl prom_compatible_name, prom_cpu_path, prom_cpu_compatible - .globl is_sun4v, sun4v_chip_type + .globl is_sun4v, sun4v_chip_type, prom_set_trap_table_name prom_peer_name: .asciz "peer" prom_compatible_name: @@ -121,6 +121,8 @@ prom_map_name: .asciz "map" prom_unmap_name: .asciz "unmap" +prom_set_trap_table_name: + .asciz "SUNW,set-trap-table" prom_sun4v_name: .asciz "sun4v" prom_niagara_prefix: @@ -691,15 +693,38 @@ setup_trap_table: sethi %hi(kern_base), %g3 ldx [%g3 + %lo(kern_base)], %g3 add %g2, %g3, %o1 + sethi %hi(sparc64_ttable_tl0), %o0 - call prom_set_trap_table_sun4v - sethi %hi(sparc64_ttable_tl0), %o0 + set prom_set_trap_table_name, %g2 + stx %g2, [%sp + 2047 + 128 + 0x00] + mov 2, %g2 + stx %g2, [%sp + 2047 + 128 + 0x08] + mov 0, %g2 + stx %g2, [%sp + 2047 + 128 + 0x10] + stx %o0, [%sp + 2047 + 128 + 0x18] + stx %o1, [%sp + 2047 + 128 + 0x20] + sethi %hi(p1275buf), %g2 + or %g2, %lo(p1275buf), %g2 + ldx [%g2 + 0x08], %o1 + call %o1 + add %sp, (2047 + 128), %o0 ba,pt %xcc, 2f nop -1: call prom_set_trap_table - sethi %hi(sparc64_ttable_tl0), %o0 +1: sethi %hi(sparc64_ttable_tl0), %o0 + set prom_set_trap_table_name, %g2 + stx %g2, [%sp + 2047 + 128 + 0x00] + mov 1, %g2 + stx %g2, [%sp + 2047 + 128 + 0x08] + mov 0, %g2 + stx %g2, [%sp + 2047 + 128 + 0x10] + stx %o0, [%sp + 2047 + 128 + 0x18] + sethi %hi(p1275buf), %g2 + or %g2, %lo(p1275buf), %g2 + ldx [%g2 + 0x08], %o1 + call %o1 + add %sp, (2047 + 128), %o0 /* Start using proper page size encodings in ctx register. */ 2: sethi %hi(sparc64_kern_pri_context), %g3 diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index 9533a25ce5d..04e81dda13d 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -345,7 +345,7 @@ after_lock_tlb: sethi %hi(tramp_stack), %g1 or %g1, %lo(tramp_stack), %g1 add %g1, TRAMP_STACK_SIZE, %g1 - sub %g1, STACKFRAME_SZ + STACK_BIAS, %sp + sub %g1, STACKFRAME_SZ + STACK_BIAS + 256, %sp mov 0, %fp /* Put garbage in these registers to trap any access to them. */ @@ -411,15 +411,38 @@ after_lock_tlb: sethi %hi(kern_base), %g3 ldx [%g3 + %lo(kern_base)], %g3 add %g2, %g3, %o1 + sethi %hi(sparc64_ttable_tl0), %o0 - call prom_set_trap_table_sun4v - sethi %hi(sparc64_ttable_tl0), %o0 + set prom_set_trap_table_name, %g2 + stx %g2, [%sp + 2047 + 128 + 0x00] + mov 2, %g2 + stx %g2, [%sp + 2047 + 128 + 0x08] + mov 0, %g2 + stx %g2, [%sp + 2047 + 128 + 0x10] + stx %o0, [%sp + 2047 + 128 + 0x18] + stx %o1, [%sp + 2047 + 128 + 0x20] + sethi %hi(p1275buf), %g2 + or %g2, %lo(p1275buf), %g2 + ldx [%g2 + 0x08], %o1 + call %o1 + add %sp, (2047 + 128), %o0 ba,pt %xcc, 2f nop -1: call prom_set_trap_table - sethi %hi(sparc64_ttable_tl0), %o0 +1: sethi %hi(sparc64_ttable_tl0), %o0 + set prom_set_trap_table_name, %g2 + stx %g2, [%sp + 2047 + 128 + 0x00] + mov 1, %g2 + stx %g2, [%sp + 2047 + 128 + 0x08] + mov 0, %g2 + stx %g2, [%sp + 2047 + 128 + 0x10] + stx %o0, [%sp + 2047 + 128 + 0x18] + sethi %hi(p1275buf), %g2 + or %g2, %lo(p1275buf), %g2 + ldx [%g2 + 0x08], %o1 + call %o1 + add %sp, (2047 + 128), %o0 2: ldx [%l0], %g6 ldx [%g6 + TI_TASK], %g4 diff --git a/arch/sparc64/prom/misc.c b/arch/sparc64/prom/misc.c index 68c83ad04ad..bbec7522826 100644 --- a/arch/sparc64/prom/misc.c +++ b/arch/sparc64/prom/misc.c @@ -143,22 +143,6 @@ unsigned char prom_get_idprom(char *idbuf, int num_bytes) return 0xff; } -/* Install Linux trap table so PROM uses that instead of its own. */ -void prom_set_trap_table(unsigned long tba) -{ - p1275_cmd("SUNW,set-trap-table", - (P1275_ARG(0, P1275_ARG_IN_64B) | - P1275_INOUT(1, 0)), tba); -} - -void prom_set_trap_table_sun4v(unsigned long tba, unsigned long mmfsa) -{ - p1275_cmd("SUNW,set-trap-table", - (P1275_ARG(0, P1275_ARG_IN_64B) | - P1275_ARG(1, P1275_ARG_IN_64B) | - P1275_INOUT(2, 0)), tba, mmfsa); -} - int prom_get_mmu_ihandle(void) { int node, ret; diff --git a/include/asm-sparc64/oplib.h b/include/asm-sparc64/oplib.h index 86dc5c018a1..55c5bb27e4d 100644 --- a/include/asm-sparc64/oplib.h +++ b/include/asm-sparc64/oplib.h @@ -297,11 +297,7 @@ extern void prom_sun4v_guest_soft_state(void); extern int prom_ihandle2path(int handle, char *buffer, int bufsize); /* Client interface level routines. */ -extern void prom_set_trap_table(unsigned long tba); -extern void prom_set_trap_table_sun4v(unsigned long tba, unsigned long mmfsa); - extern long p1275_cmd(const char *, long, ...); - #if 0 #define P1275_SIZE(x) ((((long)((x) / 32)) << 32) | (x)) -- cgit v1.2.3-70-g09d2 From 8a177c4f17c691c2c9a08a54709d37c6db481a0b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 16 Sep 2007 14:45:06 -0700 Subject: [SPARC64]: Warn user if cpu is ignored. When NR_CPUS is smaller than the cpu probed, let the user know that the cpu won't be used. Suggested by Al Viro. Signed-off-by: David S. Miller --- arch/sparc64/kernel/mdesc.c | 6 +++++- arch/sparc64/kernel/prom.c | 6 +++++- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/sparc64/kernel/mdesc.c b/arch/sparc64/kernel/mdesc.c index 9f22e4ff601..856659bb131 100644 --- a/arch/sparc64/kernel/mdesc.c +++ b/arch/sparc64/kernel/mdesc.c @@ -777,8 +777,12 @@ void __devinit mdesc_fill_in_cpu_data(cpumask_t mask) cpuid = *id; #ifdef CONFIG_SMP - if (cpuid >= NR_CPUS) + if (cpuid >= NR_CPUS) { + printk(KERN_WARNING "Ignoring CPU %d which is " + ">= NR_CPUS (%d)\n", + cpuid, NR_CPUS); continue; + } if (!cpu_isset(cpuid, mask)) continue; #else diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c index d1a78c976ce..0614dff63d7 100644 --- a/arch/sparc64/kernel/prom.c +++ b/arch/sparc64/kernel/prom.c @@ -1583,8 +1583,12 @@ static void __init of_fill_in_cpu_data(void) ncpus_probed++; #ifdef CONFIG_SMP - if (cpuid >= NR_CPUS) + if (cpuid >= NR_CPUS) { + printk(KERN_WARNING "Ignoring CPU %d which is " + ">= NR_CPUS (%d)\n", + cpuid, NR_CPUS); continue; + } #else /* On uniprocessor we only want the values for the * real physical cpu the kernel booted onto, however -- cgit v1.2.3-70-g09d2 From 6ae5f983cf8de769214d2d9e8a783c881eccd4cd Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Sun, 16 Sep 2007 14:48:21 -0700 Subject: [IPV6]: Fix source address selection. The commit 95c385 broke proper source address selection for cases in which there is a address which is makred 'deprecated'. The commit mistakenly changed ifa->flags to ifa_result->flags (probably copy/paste error from a few lines above) in the 'Rule 3' address selection code. The patch restores the previous RFC-compliant behavior. Signed-off-by: Jiri Kosina Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 91ef3be5aba..45b4c82148a 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1021,7 +1021,7 @@ int ipv6_dev_get_saddr(struct net_device *daddr_dev, hiscore.rule++; } if (ipv6_saddr_preferred(score.addr_type) || - (((ifa_result->flags & + (((ifa->flags & (IFA_F_DEPRECATED|IFA_F_OPTIMISTIC)) == 0))) { score.attrs |= IPV6_SADDR_SCORE_PREFERRED; if (!(hiscore.attrs & IPV6_SADDR_SCORE_PREFERRED)) { -- cgit v1.2.3-70-g09d2 From ce5d0b47f13f83dfb9fbb8ac91adad7120747aaf Mon Sep 17 00:00:00 2001 From: Adit Ranadive Date: Sun, 16 Sep 2007 14:52:15 -0700 Subject: [PKTGEN]: srcmac fix From: Adit Ranadive Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- net/core/pktgen.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 36fdea71d74..803d0c8826a 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -111,6 +111,9 @@ * * 802.1Q/Q-in-Q support by Francesco Fondelli (FF) * + * Fixed src_mac command to set source mac of packet to value specified in + * command by Adit Ranadive + * */ #include #include @@ -1451,8 +1454,11 @@ static ssize_t pktgen_if_write(struct file *file, } if (!strcmp(name, "src_mac")) { char *v = valstr; + unsigned char old_smac[ETH_ALEN]; unsigned char *m = pkt_dev->src_mac; + memcpy(old_smac, pkt_dev->src_mac, ETH_ALEN); + len = strn_len(&user_buffer[i], sizeof(valstr) - 1); if (len < 0) { return len; @@ -1481,6 +1487,10 @@ static ssize_t pktgen_if_write(struct file *file, } } + /* Set up Src MAC */ + if (compare_ether_addr(old_smac, pkt_dev->src_mac)) + memcpy(&(pkt_dev->hh[6]), pkt_dev->src_mac, ETH_ALEN); + sprintf(pg_result, "OK: srcmac"); return count; } -- cgit v1.2.3-70-g09d2 From ddeee3ce7fbf0e800f2a26a76d6018b42b337cc2 Mon Sep 17 00:00:00 2001 From: Satyam Sharma Date: Sun, 16 Sep 2007 14:54:05 -0700 Subject: [PKT_SCHED]: sch_cbq.c: Shut up uninitialized variable warning net/sched/sch_cbq.c: In function 'cbq_enqueue': net/sched/sch_cbq.c:383: warning: 'ret' may be used uninitialized in this function has been verified to be a bogus case. So let's shut it up. Signed-off-by: Satyam Sharma Acked-by: Patrick McHardy Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- net/sched/sch_cbq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index e38c2839b25..cbef3bbfc20 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -380,7 +380,7 @@ cbq_enqueue(struct sk_buff *skb, struct Qdisc *sch) { struct cbq_sched_data *q = qdisc_priv(sch); int len = skb->len; - int ret; + int uninitialized_var(ret); struct cbq_class *cl = cbq_classify(skb, sch, &ret); #ifdef CONFIG_NET_CLS_ACT -- cgit v1.2.3-70-g09d2 From 293035479942400a7fe8e4f72465d4e4e466b91a Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Sun, 16 Sep 2007 16:02:12 -0700 Subject: [SCTP]: Add RCU synchronization around sctp_localaddr_list sctp_localaddr_list is modified dynamically via NETDEV_UP and NETDEV_DOWN events, but there is not synchronization between writer (even handler) and readers. As a result, the readers can access an entry that has been freed and crash the sytem. Signed-off-by: Vlad Yasevich Acked-by: Paul E. McKenney Acked-by: Sridhar Samdurala Signed-off-by: David S. Miller --- include/net/sctp/sctp.h | 1 + include/net/sctp/structs.h | 6 ++++++ net/sctp/bind_addr.c | 2 ++ net/sctp/ipv6.c | 34 ++++++++++++++++++++--------- net/sctp/protocol.c | 54 +++++++++++++++++++++++++++++++++------------- net/sctp/socket.c | 38 +++++++++++++++++++++----------- 6 files changed, 97 insertions(+), 38 deletions(-) diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index d529045c167..c9cc00c8578 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -123,6 +123,7 @@ * sctp/protocol.c */ extern struct sock *sctp_get_ctl_sock(void); +extern void sctp_local_addr_free(struct rcu_head *head); extern int sctp_copy_local_addr_list(struct sctp_bind_addr *, sctp_scope_t, gfp_t gfp, int flags); diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index c0d5848c33d..a89e36197af 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -207,6 +207,9 @@ extern struct sctp_globals { * It is a list of sctp_sockaddr_entry. */ struct list_head local_addr_list; + + /* Lock that protects the local_addr_list writers */ + spinlock_t addr_list_lock; /* Flag to indicate if addip is enabled. */ int addip_enable; @@ -242,6 +245,7 @@ extern struct sctp_globals { #define sctp_port_alloc_lock (sctp_globals.port_alloc_lock) #define sctp_port_hashtable (sctp_globals.port_hashtable) #define sctp_local_addr_list (sctp_globals.local_addr_list) +#define sctp_local_addr_lock (sctp_globals.addr_list_lock) #define sctp_addip_enable (sctp_globals.addip_enable) #define sctp_prsctp_enable (sctp_globals.prsctp_enable) @@ -737,8 +741,10 @@ const union sctp_addr *sctp_source(const struct sctp_chunk *chunk); /* This is a structure for holding either an IPv6 or an IPv4 address. */ struct sctp_sockaddr_entry { struct list_head list; + struct rcu_head rcu; union sctp_addr a; __u8 use_as_src; + __u8 valid; }; typedef struct sctp_chunk *(sctp_packet_phandler_t)(struct sctp_association *); diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c index fdb287a9e2e..7fc369f9035 100644 --- a/net/sctp/bind_addr.c +++ b/net/sctp/bind_addr.c @@ -163,8 +163,10 @@ int sctp_add_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *new, addr->a.v4.sin_port = htons(bp->port); addr->use_as_src = use_as_src; + addr->valid = 1; INIT_LIST_HEAD(&addr->list); + INIT_RCU_HEAD(&addr->rcu); list_add_tail(&addr->list, &bp->address_list); SCTP_DBG_OBJCNT_INC(addr); diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index f8aa23dda1c..e12fa0a91da 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -77,13 +77,18 @@ #include -/* Event handler for inet6 address addition/deletion events. */ +/* Event handler for inet6 address addition/deletion events. + * The sctp_local_addr_list needs to be protocted by a spin lock since + * multiple notifiers (say IPv4 and IPv6) may be running at the same + * time and thus corrupt the list. + * The reader side is protected with RCU. + */ static int sctp_inet6addr_event(struct notifier_block *this, unsigned long ev, void *ptr) { struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)ptr; - struct sctp_sockaddr_entry *addr; - struct list_head *pos, *temp; + struct sctp_sockaddr_entry *addr = NULL; + struct sctp_sockaddr_entry *temp; switch (ev) { case NETDEV_UP: @@ -94,19 +99,26 @@ static int sctp_inet6addr_event(struct notifier_block *this, unsigned long ev, memcpy(&addr->a.v6.sin6_addr, &ifa->addr, sizeof(struct in6_addr)); addr->a.v6.sin6_scope_id = ifa->idev->dev->ifindex; - list_add_tail(&addr->list, &sctp_local_addr_list); + addr->valid = 1; + spin_lock_bh(&sctp_local_addr_lock); + list_add_tail_rcu(&addr->list, &sctp_local_addr_list); + spin_unlock_bh(&sctp_local_addr_lock); } break; case NETDEV_DOWN: - list_for_each_safe(pos, temp, &sctp_local_addr_list) { - addr = list_entry(pos, struct sctp_sockaddr_entry, list); - if (ipv6_addr_equal(&addr->a.v6.sin6_addr, &ifa->addr)) { - list_del(pos); - kfree(addr); + spin_lock_bh(&sctp_local_addr_lock); + list_for_each_entry_safe(addr, temp, + &sctp_local_addr_list, list) { + if (ipv6_addr_equal(&addr->a.v6.sin6_addr, + &ifa->addr)) { + addr->valid = 0; + list_del_rcu(&addr->list); break; } } - + spin_unlock_bh(&sctp_local_addr_lock); + if (addr && !addr->valid) + call_rcu(&addr->rcu, sctp_local_addr_free); break; } @@ -367,7 +379,9 @@ static void sctp_v6_copy_addrlist(struct list_head *addrlist, addr->a.v6.sin6_port = 0; addr->a.v6.sin6_addr = ifp->addr; addr->a.v6.sin6_scope_id = dev->ifindex; + addr->valid = 1; INIT_LIST_HEAD(&addr->list); + INIT_RCU_HEAD(&addr->rcu); list_add_tail(&addr->list, addrlist); } } diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index e98579b788b..7ee120e8591 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -153,6 +153,9 @@ static void sctp_v4_copy_addrlist(struct list_head *addrlist, addr->a.v4.sin_family = AF_INET; addr->a.v4.sin_port = 0; addr->a.v4.sin_addr.s_addr = ifa->ifa_local; + addr->valid = 1; + INIT_LIST_HEAD(&addr->list); + INIT_RCU_HEAD(&addr->rcu); list_add_tail(&addr->list, addrlist); } } @@ -192,16 +195,24 @@ static void sctp_free_local_addr_list(void) } } +void sctp_local_addr_free(struct rcu_head *head) +{ + struct sctp_sockaddr_entry *e = container_of(head, + struct sctp_sockaddr_entry, rcu); + kfree(e); +} + /* Copy the local addresses which are valid for 'scope' into 'bp'. */ int sctp_copy_local_addr_list(struct sctp_bind_addr *bp, sctp_scope_t scope, gfp_t gfp, int copy_flags) { struct sctp_sockaddr_entry *addr; int error = 0; - struct list_head *pos, *temp; - list_for_each_safe(pos, temp, &sctp_local_addr_list) { - addr = list_entry(pos, struct sctp_sockaddr_entry, list); + rcu_read_lock(); + list_for_each_entry_rcu(addr, &sctp_local_addr_list, list) { + if (!addr->valid) + continue; if (sctp_in_scope(&addr->a, scope)) { /* Now that the address is in scope, check to see if * the address type is really supported by the local @@ -221,6 +232,7 @@ int sctp_copy_local_addr_list(struct sctp_bind_addr *bp, sctp_scope_t scope, } end_copy: + rcu_read_unlock(); return error; } @@ -600,13 +612,18 @@ static void sctp_v4_seq_dump_addr(struct seq_file *seq, union sctp_addr *addr) seq_printf(seq, "%d.%d.%d.%d ", NIPQUAD(addr->v4.sin_addr)); } -/* Event handler for inet address addition/deletion events. */ +/* Event handler for inet address addition/deletion events. + * The sctp_local_addr_list needs to be protocted by a spin lock since + * multiple notifiers (say IPv4 and IPv6) may be running at the same + * time and thus corrupt the list. + * The reader side is protected with RCU. + */ static int sctp_inetaddr_event(struct notifier_block *this, unsigned long ev, void *ptr) { struct in_ifaddr *ifa = (struct in_ifaddr *)ptr; - struct sctp_sockaddr_entry *addr; - struct list_head *pos, *temp; + struct sctp_sockaddr_entry *addr = NULL; + struct sctp_sockaddr_entry *temp; switch (ev) { case NETDEV_UP: @@ -615,19 +632,25 @@ static int sctp_inetaddr_event(struct notifier_block *this, unsigned long ev, addr->a.v4.sin_family = AF_INET; addr->a.v4.sin_port = 0; addr->a.v4.sin_addr.s_addr = ifa->ifa_local; - list_add_tail(&addr->list, &sctp_local_addr_list); + addr->valid = 1; + spin_lock_bh(&sctp_local_addr_lock); + list_add_tail_rcu(&addr->list, &sctp_local_addr_list); + spin_unlock_bh(&sctp_local_addr_lock); } break; case NETDEV_DOWN: - list_for_each_safe(pos, temp, &sctp_local_addr_list) { - addr = list_entry(pos, struct sctp_sockaddr_entry, list); + spin_lock_bh(&sctp_local_addr_lock); + list_for_each_entry_safe(addr, temp, + &sctp_local_addr_list, list) { if (addr->a.v4.sin_addr.s_addr == ifa->ifa_local) { - list_del(pos); - kfree(addr); + addr->valid = 0; + list_del_rcu(&addr->list); break; } } - + spin_unlock_bh(&sctp_local_addr_lock); + if (addr && !addr->valid) + call_rcu(&addr->rcu, sctp_local_addr_free); break; } @@ -1160,6 +1183,7 @@ SCTP_STATIC __init int sctp_init(void) /* Initialize the local address list. */ INIT_LIST_HEAD(&sctp_local_addr_list); + spin_lock_init(&sctp_local_addr_lock); sctp_get_local_addr_list(); /* Register notifier for inet address additions/deletions. */ @@ -1227,6 +1251,9 @@ SCTP_STATIC __exit void sctp_exit(void) sctp_v6_del_protocol(); inet_del_protocol(&sctp_protocol, IPPROTO_SCTP); + /* Unregister notifier for inet address additions/deletions. */ + unregister_inetaddr_notifier(&sctp_inetaddr_notifier); + /* Free the local address list. */ sctp_free_local_addr_list(); @@ -1240,9 +1267,6 @@ SCTP_STATIC __exit void sctp_exit(void) inet_unregister_protosw(&sctp_stream_protosw); inet_unregister_protosw(&sctp_seqpacket_protosw); - /* Unregister notifier for inet address additions/deletions. */ - unregister_inetaddr_notifier(&sctp_inetaddr_notifier); - sctp_sysctl_unregister(); list_del(&sctp_ipv4_specific.list); diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 33354602ae8..a3acf78d06b 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4057,9 +4057,9 @@ static int sctp_getsockopt_local_addrs_num_old(struct sock *sk, int len, int __user *optlen) { sctp_assoc_t id; + struct list_head *pos; struct sctp_bind_addr *bp; struct sctp_association *asoc; - struct list_head *pos, *temp; struct sctp_sockaddr_entry *addr; rwlock_t *addr_lock; int cnt = 0; @@ -4096,15 +4096,19 @@ static int sctp_getsockopt_local_addrs_num_old(struct sock *sk, int len, addr = list_entry(bp->address_list.next, struct sctp_sockaddr_entry, list); if (sctp_is_any(&addr->a)) { - list_for_each_safe(pos, temp, &sctp_local_addr_list) { - addr = list_entry(pos, - struct sctp_sockaddr_entry, - list); + rcu_read_lock(); + list_for_each_entry_rcu(addr, + &sctp_local_addr_list, list) { + if (!addr->valid) + continue; + if ((PF_INET == sk->sk_family) && (AF_INET6 == addr->a.sa.sa_family)) continue; + cnt++; } + rcu_read_unlock(); } else { cnt = 1; } @@ -4127,14 +4131,16 @@ static int sctp_copy_laddrs_old(struct sock *sk, __u16 port, int max_addrs, void *to, int *bytes_copied) { - struct list_head *pos, *next; struct sctp_sockaddr_entry *addr; union sctp_addr temp; int cnt = 0; int addrlen; - list_for_each_safe(pos, next, &sctp_local_addr_list) { - addr = list_entry(pos, struct sctp_sockaddr_entry, list); + rcu_read_lock(); + list_for_each_entry_rcu(addr, &sctp_local_addr_list, list) { + if (!addr->valid) + continue; + if ((PF_INET == sk->sk_family) && (AF_INET6 == addr->a.sa.sa_family)) continue; @@ -4149,6 +4155,7 @@ static int sctp_copy_laddrs_old(struct sock *sk, __u16 port, cnt ++; if (cnt >= max_addrs) break; } + rcu_read_unlock(); return cnt; } @@ -4156,14 +4163,16 @@ static int sctp_copy_laddrs_old(struct sock *sk, __u16 port, static int sctp_copy_laddrs(struct sock *sk, __u16 port, void *to, size_t space_left, int *bytes_copied) { - struct list_head *pos, *next; struct sctp_sockaddr_entry *addr; union sctp_addr temp; int cnt = 0; int addrlen; - list_for_each_safe(pos, next, &sctp_local_addr_list) { - addr = list_entry(pos, struct sctp_sockaddr_entry, list); + rcu_read_lock(); + list_for_each_entry_rcu(addr, &sctp_local_addr_list, list) { + if (!addr->valid) + continue; + if ((PF_INET == sk->sk_family) && (AF_INET6 == addr->a.sa.sa_family)) continue; @@ -4171,8 +4180,10 @@ static int sctp_copy_laddrs(struct sock *sk, __u16 port, void *to, sctp_get_pf_specific(sk->sk_family)->addr_v4map(sctp_sk(sk), &temp); addrlen = sctp_get_af_specific(temp.sa.sa_family)->sockaddr_len; - if (space_left < addrlen) - return -ENOMEM; + if (space_left < addrlen) { + cnt = -ENOMEM; + break; + } memcpy(to, &temp, addrlen); to += addrlen; @@ -4180,6 +4191,7 @@ static int sctp_copy_laddrs(struct sock *sk, __u16 port, void *to, space_left -= addrlen; *bytes_copied += addrlen; } + rcu_read_unlock(); return cnt; } -- cgit v1.2.3-70-g09d2 From 559cf710b07c5e2cfa3fb8d8f4a1320fd84c53f9 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Sun, 16 Sep 2007 16:03:28 -0700 Subject: [SCTP]: Convert bind_addr_list locking to RCU Since the sctp_sockaddr_entry is now RCU enabled as part of the patch to synchronize sctp_localaddr_list, it makes sense to change all handling of these entries to RCU. This includes the sctp_bind_addrs structure and it's list of bound addresses. This list is currently protected by an external rw_lock and that looks like an overkill. There are only 2 writers to the list: bind()/bindx() calls, and BH processing of ASCONF-ACK chunks. These are already seriealized via the socket lock, so they will not step on each other. These are also relatively rare, so we should be good with RCU. The readers are varied and they are easily converted to RCU. Signed-off-by: Vlad Yasevich Acked-by: Paul E. McKenney Acked-by: Sridhar Samdurala Signed-off-by: David S. Miller --- include/net/sctp/structs.h | 7 ++-- net/sctp/associola.c | 14 +------ net/sctp/bind_addr.c | 68 +++++++++++++++++++++----------- net/sctp/endpointola.c | 27 ++++--------- net/sctp/ipv6.c | 12 +++--- net/sctp/protocol.c | 25 +++++------- net/sctp/sm_make_chunk.c | 18 +++------ net/sctp/socket.c | 98 +++++++++++++--------------------------------- 8 files changed, 106 insertions(+), 163 deletions(-) diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index a89e36197af..c2fe2dcc9af 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -1155,7 +1155,9 @@ int sctp_bind_addr_copy(struct sctp_bind_addr *dest, int flags); int sctp_add_bind_addr(struct sctp_bind_addr *, union sctp_addr *, __u8 use_as_src, gfp_t gfp); -int sctp_del_bind_addr(struct sctp_bind_addr *, union sctp_addr *); +int sctp_del_bind_addr(struct sctp_bind_addr *, union sctp_addr *, + void (*rcu_call)(struct rcu_head *, + void (*func)(struct rcu_head *))); int sctp_bind_addr_match(struct sctp_bind_addr *, const union sctp_addr *, struct sctp_sock *); union sctp_addr *sctp_find_unmatch_addr(struct sctp_bind_addr *bp, @@ -1226,9 +1228,6 @@ struct sctp_ep_common { * bind_addr.address_list is our set of local IP addresses. */ struct sctp_bind_addr bind_addr; - - /* Protection during address list comparisons. */ - rwlock_t addr_lock; }; diff --git a/net/sctp/associola.c b/net/sctp/associola.c index 2ad1caf1ea4..9bad8ba0fed 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -99,7 +99,6 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a /* Initialize the bind addr area. */ sctp_bind_addr_init(&asoc->base.bind_addr, ep->base.bind_addr.port); - rwlock_init(&asoc->base.addr_lock); asoc->state = SCTP_STATE_CLOSED; @@ -937,8 +936,6 @@ struct sctp_transport *sctp_assoc_is_match(struct sctp_association *asoc, { struct sctp_transport *transport; - sctp_read_lock(&asoc->base.addr_lock); - if ((htons(asoc->base.bind_addr.port) == laddr->v4.sin_port) && (htons(asoc->peer.port) == paddr->v4.sin_port)) { transport = sctp_assoc_lookup_paddr(asoc, paddr); @@ -952,7 +949,6 @@ struct sctp_transport *sctp_assoc_is_match(struct sctp_association *asoc, transport = NULL; out: - sctp_read_unlock(&asoc->base.addr_lock); return transport; } @@ -1376,19 +1372,13 @@ int sctp_assoc_set_bind_addr_from_cookie(struct sctp_association *asoc, int sctp_assoc_lookup_laddr(struct sctp_association *asoc, const union sctp_addr *laddr) { - int found; + int found = 0; - sctp_read_lock(&asoc->base.addr_lock); if ((asoc->base.bind_addr.port == ntohs(laddr->v4.sin_port)) && sctp_bind_addr_match(&asoc->base.bind_addr, laddr, - sctp_sk(asoc->base.sk))) { + sctp_sk(asoc->base.sk))) found = 1; - goto out; - } - found = 0; -out: - sctp_read_unlock(&asoc->base.addr_lock); return found; } diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c index 7fc369f9035..d35cbf5aae3 100644 --- a/net/sctp/bind_addr.c +++ b/net/sctp/bind_addr.c @@ -167,7 +167,11 @@ int sctp_add_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *new, INIT_LIST_HEAD(&addr->list); INIT_RCU_HEAD(&addr->rcu); - list_add_tail(&addr->list, &bp->address_list); + + /* We always hold a socket lock when calling this function, + * and that acts as a writer synchronizing lock. + */ + list_add_tail_rcu(&addr->list, &bp->address_list); SCTP_DBG_OBJCNT_INC(addr); return 0; @@ -176,23 +180,35 @@ int sctp_add_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *new, /* Delete an address from the bind address list in the SCTP_bind_addr * structure. */ -int sctp_del_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *del_addr) +int sctp_del_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *del_addr, + void (*rcu_call)(struct rcu_head *head, + void (*func)(struct rcu_head *head))) { - struct list_head *pos, *temp; - struct sctp_sockaddr_entry *addr; + struct sctp_sockaddr_entry *addr, *temp; - list_for_each_safe(pos, temp, &bp->address_list) { - addr = list_entry(pos, struct sctp_sockaddr_entry, list); + /* We hold the socket lock when calling this function, + * and that acts as a writer synchronizing lock. + */ + list_for_each_entry_safe(addr, temp, &bp->address_list, list) { if (sctp_cmp_addr_exact(&addr->a, del_addr)) { /* Found the exact match. */ - list_del(pos); - kfree(addr); - SCTP_DBG_OBJCNT_DEC(addr); - - return 0; + addr->valid = 0; + list_del_rcu(&addr->list); + break; } } + /* Call the rcu callback provided in the args. This function is + * called by both BH packet processing and user side socket option + * processing, but it works on different lists in those 2 contexts. + * Each context provides it's own callback, whether call_rcu_bh() + * or call_rcu(), to make sure that we wait for an appropriate time. + */ + if (addr && !addr->valid) { + rcu_call(&addr->rcu, sctp_local_addr_free); + SCTP_DBG_OBJCNT_DEC(addr); + } + return -EINVAL; } @@ -302,15 +318,20 @@ int sctp_bind_addr_match(struct sctp_bind_addr *bp, struct sctp_sock *opt) { struct sctp_sockaddr_entry *laddr; - struct list_head *pos; - - list_for_each(pos, &bp->address_list) { - laddr = list_entry(pos, struct sctp_sockaddr_entry, list); - if (opt->pf->cmp_addr(&laddr->a, addr, opt)) - return 1; + int match = 0; + + rcu_read_lock(); + list_for_each_entry_rcu(laddr, &bp->address_list, list) { + if (!laddr->valid) + continue; + if (opt->pf->cmp_addr(&laddr->a, addr, opt)) { + match = 1; + break; + } } + rcu_read_unlock(); - return 0; + return match; } /* Find the first address in the bind address list that is not present in @@ -325,18 +346,19 @@ union sctp_addr *sctp_find_unmatch_addr(struct sctp_bind_addr *bp, union sctp_addr *addr; void *addr_buf; struct sctp_af *af; - struct list_head *pos; int i; - list_for_each(pos, &bp->address_list) { - laddr = list_entry(pos, struct sctp_sockaddr_entry, list); - + /* This is only called sctp_send_asconf_del_ip() and we hold + * the socket lock in that code patch, so that address list + * can't change. + */ + list_for_each_entry(laddr, &bp->address_list, list) { addr_buf = (union sctp_addr *)addrs; for (i = 0; i < addrcnt; i++) { addr = (union sctp_addr *)addr_buf; af = sctp_get_af_specific(addr->v4.sin_family); if (!af) - return NULL; + break; if (opt->pf->cmp_addr(&laddr->a, addr, opt)) break; diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c index 1404a9e2e78..8f485a0d14b 100644 --- a/net/sctp/endpointola.c +++ b/net/sctp/endpointola.c @@ -92,7 +92,6 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep, /* Initialize the bind addr area */ sctp_bind_addr_init(&ep->base.bind_addr, 0); - rwlock_init(&ep->base.addr_lock); /* Remember who we are attached to. */ ep->base.sk = sk; @@ -225,21 +224,14 @@ void sctp_endpoint_put(struct sctp_endpoint *ep) struct sctp_endpoint *sctp_endpoint_is_match(struct sctp_endpoint *ep, const union sctp_addr *laddr) { - struct sctp_endpoint *retval; + struct sctp_endpoint *retval = NULL; - sctp_read_lock(&ep->base.addr_lock); if (htons(ep->base.bind_addr.port) == laddr->v4.sin_port) { if (sctp_bind_addr_match(&ep->base.bind_addr, laddr, - sctp_sk(ep->base.sk))) { + sctp_sk(ep->base.sk))) retval = ep; - goto out; - } } - retval = NULL; - -out: - sctp_read_unlock(&ep->base.addr_lock); return retval; } @@ -261,9 +253,7 @@ static struct sctp_association *__sctp_endpoint_lookup_assoc( list_for_each(pos, &ep->asocs) { asoc = list_entry(pos, struct sctp_association, asocs); if (rport == asoc->peer.port) { - sctp_read_lock(&asoc->base.addr_lock); *transport = sctp_assoc_lookup_paddr(asoc, paddr); - sctp_read_unlock(&asoc->base.addr_lock); if (*transport) return asoc; @@ -295,20 +285,17 @@ struct sctp_association *sctp_endpoint_lookup_assoc( int sctp_endpoint_is_peeled_off(struct sctp_endpoint *ep, const union sctp_addr *paddr) { - struct list_head *pos; struct sctp_sockaddr_entry *addr; struct sctp_bind_addr *bp; - sctp_read_lock(&ep->base.addr_lock); bp = &ep->base.bind_addr; - list_for_each(pos, &bp->address_list) { - addr = list_entry(pos, struct sctp_sockaddr_entry, list); - if (sctp_has_association(&addr->a, paddr)) { - sctp_read_unlock(&ep->base.addr_lock); + /* This function is called with the socket lock held, + * so the address_list can not change. + */ + list_for_each_entry(addr, &bp->address_list, list) { + if (sctp_has_association(&addr->a, paddr)) return 1; - } } - sctp_read_unlock(&ep->base.addr_lock); return 0; } diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index e12fa0a91da..670fd2740b8 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -302,9 +302,7 @@ static void sctp_v6_get_saddr(struct sctp_association *asoc, union sctp_addr *saddr) { struct sctp_bind_addr *bp; - rwlock_t *addr_lock; struct sctp_sockaddr_entry *laddr; - struct list_head *pos; sctp_scope_t scope; union sctp_addr *baddr = NULL; __u8 matchlen = 0; @@ -324,14 +322,14 @@ static void sctp_v6_get_saddr(struct sctp_association *asoc, scope = sctp_scope(daddr); bp = &asoc->base.bind_addr; - addr_lock = &asoc->base.addr_lock; /* Go through the bind address list and find the best source address * that matches the scope of the destination address. */ - sctp_read_lock(addr_lock); - list_for_each(pos, &bp->address_list) { - laddr = list_entry(pos, struct sctp_sockaddr_entry, list); + rcu_read_lock(); + list_for_each_entry_rcu(laddr, &bp->address_list, list) { + if (!laddr->valid) + continue; if ((laddr->use_as_src) && (laddr->a.sa.sa_family == AF_INET6) && (scope <= sctp_scope(&laddr->a))) { @@ -353,7 +351,7 @@ static void sctp_v6_get_saddr(struct sctp_association *asoc, __FUNCTION__, asoc, NIP6(daddr->v6.sin6_addr)); } - sctp_read_unlock(addr_lock); + rcu_read_unlock(); } /* Make a copy of all potential local addresses. */ diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 7ee120e8591..3d036cdfae4 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -224,7 +224,7 @@ int sctp_copy_local_addr_list(struct sctp_bind_addr *bp, sctp_scope_t scope, (copy_flags & SCTP_ADDR6_ALLOWED) && (copy_flags & SCTP_ADDR6_PEERSUPP)))) { error = sctp_add_bind_addr(bp, &addr->a, 1, - GFP_ATOMIC); + GFP_ATOMIC); if (error) goto end_copy; } @@ -428,9 +428,7 @@ static struct dst_entry *sctp_v4_get_dst(struct sctp_association *asoc, struct rtable *rt; struct flowi fl; struct sctp_bind_addr *bp; - rwlock_t *addr_lock; struct sctp_sockaddr_entry *laddr; - struct list_head *pos; struct dst_entry *dst = NULL; union sctp_addr dst_saddr; @@ -459,23 +457,20 @@ static struct dst_entry *sctp_v4_get_dst(struct sctp_association *asoc, goto out; bp = &asoc->base.bind_addr; - addr_lock = &asoc->base.addr_lock; if (dst) { /* Walk through the bind address list and look for a bind * address that matches the source address of the returned dst. */ - sctp_read_lock(addr_lock); - list_for_each(pos, &bp->address_list) { - laddr = list_entry(pos, struct sctp_sockaddr_entry, - list); - if (!laddr->use_as_src) + rcu_read_lock(); + list_for_each_entry_rcu(laddr, &bp->address_list, list) { + if (!laddr->valid || !laddr->use_as_src) continue; sctp_v4_dst_saddr(&dst_saddr, dst, htons(bp->port)); if (sctp_v4_cmp_addr(&dst_saddr, &laddr->a)) goto out_unlock; } - sctp_read_unlock(addr_lock); + rcu_read_unlock(); /* None of the bound addresses match the source address of the * dst. So release it. @@ -487,10 +482,10 @@ static struct dst_entry *sctp_v4_get_dst(struct sctp_association *asoc, /* Walk through the bind address list and try to get a dst that * matches a bind address as the source address. */ - sctp_read_lock(addr_lock); - list_for_each(pos, &bp->address_list) { - laddr = list_entry(pos, struct sctp_sockaddr_entry, list); - + rcu_read_lock(); + list_for_each_entry_rcu(laddr, &bp->address_list, list) { + if (!laddr->valid) + continue; if ((laddr->use_as_src) && (AF_INET == laddr->a.sa.sa_family)) { fl.fl4_src = laddr->a.v4.sin_addr.s_addr; @@ -502,7 +497,7 @@ static struct dst_entry *sctp_v4_get_dst(struct sctp_association *asoc, } out_unlock: - sctp_read_unlock(addr_lock); + rcu_read_unlock(); out: if (dst) SCTP_DEBUG_PRINTK("rt_dst:%u.%u.%u.%u, rt_src:%u.%u.%u.%u\n", diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c index 79856c92452..2e34220d94c 100644 --- a/net/sctp/sm_make_chunk.c +++ b/net/sctp/sm_make_chunk.c @@ -1531,7 +1531,7 @@ no_hmac: /* Also, add the destination address. */ if (list_empty(&retval->base.bind_addr.address_list)) { sctp_add_bind_addr(&retval->base.bind_addr, &chunk->dest, 1, - GFP_ATOMIC); + GFP_ATOMIC); } retval->next_tsn = retval->c.initial_tsn; @@ -2613,22 +2613,16 @@ static int sctp_asconf_param_success(struct sctp_association *asoc, switch (asconf_param->param_hdr.type) { case SCTP_PARAM_ADD_IP: - sctp_local_bh_disable(); - sctp_write_lock(&asoc->base.addr_lock); - list_for_each(pos, &bp->address_list) { - saddr = list_entry(pos, struct sctp_sockaddr_entry, list); + /* This is always done in BH context with a socket lock + * held, so the list can not change. + */ + list_for_each_entry(saddr, &bp->address_list, list) { if (sctp_cmp_addr_exact(&saddr->a, &addr)) saddr->use_as_src = 1; } - sctp_write_unlock(&asoc->base.addr_lock); - sctp_local_bh_enable(); break; case SCTP_PARAM_DEL_IP: - sctp_local_bh_disable(); - sctp_write_lock(&asoc->base.addr_lock); - retval = sctp_del_bind_addr(bp, &addr); - sctp_write_unlock(&asoc->base.addr_lock); - sctp_local_bh_enable(); + retval = sctp_del_bind_addr(bp, &addr, call_rcu_bh); list_for_each(pos, &asoc->peer.transport_addr_list) { transport = list_entry(pos, struct sctp_transport, transports); diff --git a/net/sctp/socket.c b/net/sctp/socket.c index a3acf78d06b..772fbfb4bfd 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -367,14 +367,10 @@ SCTP_STATIC int sctp_do_bind(struct sock *sk, union sctp_addr *addr, int len) if (!bp->port) bp->port = inet_sk(sk)->num; - /* Add the address to the bind address list. */ - sctp_local_bh_disable(); - sctp_write_lock(&ep->base.addr_lock); - - /* Use GFP_ATOMIC since BHs are disabled. */ + /* Add the address to the bind address list. + * Use GFP_ATOMIC since BHs will be disabled. + */ ret = sctp_add_bind_addr(bp, addr, 1, GFP_ATOMIC); - sctp_write_unlock(&ep->base.addr_lock); - sctp_local_bh_enable(); /* Copy back into socket for getsockname() use. */ if (!ret) { @@ -544,15 +540,12 @@ static int sctp_send_asconf_add_ip(struct sock *sk, if (i < addrcnt) continue; - /* Use the first address in bind addr list of association as - * Address Parameter of ASCONF CHUNK. + /* Use the first valid address in bind addr list of + * association as Address Parameter of ASCONF CHUNK. */ - sctp_read_lock(&asoc->base.addr_lock); bp = &asoc->base.bind_addr; p = bp->address_list.next; laddr = list_entry(p, struct sctp_sockaddr_entry, list); - sctp_read_unlock(&asoc->base.addr_lock); - chunk = sctp_make_asconf_update_ip(asoc, &laddr->a, addrs, addrcnt, SCTP_PARAM_ADD_IP); if (!chunk) { @@ -567,8 +560,6 @@ static int sctp_send_asconf_add_ip(struct sock *sk, /* Add the new addresses to the bind address list with * use_as_src set to 0. */ - sctp_local_bh_disable(); - sctp_write_lock(&asoc->base.addr_lock); addr_buf = addrs; for (i = 0; i < addrcnt; i++) { addr = (union sctp_addr *)addr_buf; @@ -578,8 +569,6 @@ static int sctp_send_asconf_add_ip(struct sock *sk, GFP_ATOMIC); addr_buf += af->sockaddr_len; } - sctp_write_unlock(&asoc->base.addr_lock); - sctp_local_bh_enable(); } out: @@ -651,13 +640,7 @@ static int sctp_bindx_rem(struct sock *sk, struct sockaddr *addrs, int addrcnt) * socket routing and failover schemes. Refer to comments in * sctp_do_bind(). -daisy */ - sctp_local_bh_disable(); - sctp_write_lock(&ep->base.addr_lock); - - retval = sctp_del_bind_addr(bp, sa_addr); - - sctp_write_unlock(&ep->base.addr_lock); - sctp_local_bh_enable(); + retval = sctp_del_bind_addr(bp, sa_addr, call_rcu); addr_buf += af->sockaddr_len; err_bindx_rem: @@ -748,14 +731,16 @@ static int sctp_send_asconf_del_ip(struct sock *sk, * make sure that we do not delete all the addresses in the * association. */ - sctp_read_lock(&asoc->base.addr_lock); bp = &asoc->base.bind_addr; laddr = sctp_find_unmatch_addr(bp, (union sctp_addr *)addrs, addrcnt, sp); - sctp_read_unlock(&asoc->base.addr_lock); if (!laddr) continue; + /* We do not need RCU protection throughout this loop + * because this is done under a socket lock from the + * setsockopt call. + */ chunk = sctp_make_asconf_update_ip(asoc, laddr, addrs, addrcnt, SCTP_PARAM_DEL_IP); if (!chunk) { @@ -766,23 +751,16 @@ static int sctp_send_asconf_del_ip(struct sock *sk, /* Reset use_as_src flag for the addresses in the bind address * list that are to be deleted. */ - sctp_local_bh_disable(); - sctp_write_lock(&asoc->base.addr_lock); addr_buf = addrs; for (i = 0; i < addrcnt; i++) { laddr = (union sctp_addr *)addr_buf; af = sctp_get_af_specific(laddr->v4.sin_family); - list_for_each(pos1, &bp->address_list) { - saddr = list_entry(pos1, - struct sctp_sockaddr_entry, - list); + list_for_each_entry(saddr, &bp->address_list, list) { if (sctp_cmp_addr_exact(&saddr->a, laddr)) saddr->use_as_src = 0; } addr_buf += af->sockaddr_len; } - sctp_write_unlock(&asoc->base.addr_lock); - sctp_local_bh_enable(); /* Update the route and saddr entries for all the transports * as some of the addresses in the bind address list are @@ -4057,11 +4035,9 @@ static int sctp_getsockopt_local_addrs_num_old(struct sock *sk, int len, int __user *optlen) { sctp_assoc_t id; - struct list_head *pos; struct sctp_bind_addr *bp; struct sctp_association *asoc; struct sctp_sockaddr_entry *addr; - rwlock_t *addr_lock; int cnt = 0; if (len < sizeof(sctp_assoc_t)) @@ -4078,17 +4054,13 @@ static int sctp_getsockopt_local_addrs_num_old(struct sock *sk, int len, */ if (0 == id) { bp = &sctp_sk(sk)->ep->base.bind_addr; - addr_lock = &sctp_sk(sk)->ep->base.addr_lock; } else { asoc = sctp_id2assoc(sk, id); if (!asoc) return -EINVAL; bp = &asoc->base.bind_addr; - addr_lock = &asoc->base.addr_lock; } - sctp_read_lock(addr_lock); - /* If the endpoint is bound to 0.0.0.0 or ::0, count the valid * addresses from the global local address list. */ @@ -4115,12 +4087,14 @@ static int sctp_getsockopt_local_addrs_num_old(struct sock *sk, int len, goto done; } - list_for_each(pos, &bp->address_list) { + /* Protection on the bound address list is not needed, + * since in the socket option context we hold the socket lock, + * so there is no way that the bound address list can change. + */ + list_for_each_entry(addr, &bp->address_list, list) { cnt ++; } - done: - sctp_read_unlock(addr_lock); return cnt; } @@ -4204,7 +4178,6 @@ static int sctp_getsockopt_local_addrs_old(struct sock *sk, int len, { struct sctp_bind_addr *bp; struct sctp_association *asoc; - struct list_head *pos; int cnt = 0; struct sctp_getaddrs_old getaddrs; struct sctp_sockaddr_entry *addr; @@ -4212,7 +4185,6 @@ static int sctp_getsockopt_local_addrs_old(struct sock *sk, int len, union sctp_addr temp; struct sctp_sock *sp = sctp_sk(sk); int addrlen; - rwlock_t *addr_lock; int err = 0; void *addrs; void *buf; @@ -4234,13 +4206,11 @@ static int sctp_getsockopt_local_addrs_old(struct sock *sk, int len, */ if (0 == getaddrs.assoc_id) { bp = &sctp_sk(sk)->ep->base.bind_addr; - addr_lock = &sctp_sk(sk)->ep->base.addr_lock; } else { asoc = sctp_id2assoc(sk, getaddrs.assoc_id); if (!asoc) return -EINVAL; bp = &asoc->base.bind_addr; - addr_lock = &asoc->base.addr_lock; } to = getaddrs.addrs; @@ -4254,8 +4224,6 @@ static int sctp_getsockopt_local_addrs_old(struct sock *sk, int len, if (!addrs) return -ENOMEM; - sctp_read_lock(addr_lock); - /* If the endpoint is bound to 0.0.0.0 or ::0, get the valid * addresses from the global local address list. */ @@ -4271,8 +4239,11 @@ static int sctp_getsockopt_local_addrs_old(struct sock *sk, int len, } buf = addrs; - list_for_each(pos, &bp->address_list) { - addr = list_entry(pos, struct sctp_sockaddr_entry, list); + /* Protection on the bound address list is not needed since + * in the socket option context we hold a socket lock and + * thus the bound address list can't change. + */ + list_for_each_entry(addr, &bp->address_list, list) { memcpy(&temp, &addr->a, sizeof(temp)); sctp_get_pf_specific(sk->sk_family)->addr_v4map(sp, &temp); addrlen = sctp_get_af_specific(temp.sa.sa_family)->sockaddr_len; @@ -4284,8 +4255,6 @@ static int sctp_getsockopt_local_addrs_old(struct sock *sk, int len, } copy_getaddrs: - sctp_read_unlock(addr_lock); - /* copy the entire address list into the user provided space */ if (copy_to_user(to, addrs, bytes_copied)) { err = -EFAULT; @@ -4307,7 +4276,6 @@ static int sctp_getsockopt_local_addrs(struct sock *sk, int len, { struct sctp_bind_addr *bp; struct sctp_association *asoc; - struct list_head *pos; int cnt = 0; struct sctp_getaddrs getaddrs; struct sctp_sockaddr_entry *addr; @@ -4315,7 +4283,6 @@ static int sctp_getsockopt_local_addrs(struct sock *sk, int len, union sctp_addr temp; struct sctp_sock *sp = sctp_sk(sk); int addrlen; - rwlock_t *addr_lock; int err = 0; size_t space_left; int bytes_copied = 0; @@ -4336,13 +4303,11 @@ static int sctp_getsockopt_local_addrs(struct sock *sk, int len, */ if (0 == getaddrs.assoc_id) { bp = &sctp_sk(sk)->ep->base.bind_addr; - addr_lock = &sctp_sk(sk)->ep->base.addr_lock; } else { asoc = sctp_id2assoc(sk, getaddrs.assoc_id); if (!asoc) return -EINVAL; bp = &asoc->base.bind_addr; - addr_lock = &asoc->base.addr_lock; } to = optval + offsetof(struct sctp_getaddrs,addrs); @@ -4352,8 +4317,6 @@ static int sctp_getsockopt_local_addrs(struct sock *sk, int len, if (!addrs) return -ENOMEM; - sctp_read_lock(addr_lock); - /* If the endpoint is bound to 0.0.0.0 or ::0, get the valid * addresses from the global local address list. */ @@ -4365,21 +4328,24 @@ static int sctp_getsockopt_local_addrs(struct sock *sk, int len, space_left, &bytes_copied); if (cnt < 0) { err = cnt; - goto error_lock; + goto out; } goto copy_getaddrs; } } buf = addrs; - list_for_each(pos, &bp->address_list) { - addr = list_entry(pos, struct sctp_sockaddr_entry, list); + /* Protection on the bound address list is not needed since + * in the socket option context we hold a socket lock and + * thus the bound address list can't change. + */ + list_for_each_entry(addr, &bp->address_list, list) { memcpy(&temp, &addr->a, sizeof(temp)); sctp_get_pf_specific(sk->sk_family)->addr_v4map(sp, &temp); addrlen = sctp_get_af_specific(temp.sa.sa_family)->sockaddr_len; if (space_left < addrlen) { err = -ENOMEM; /*fixme: right error?*/ - goto error_lock; + goto out; } memcpy(buf, &temp, addrlen); buf += addrlen; @@ -4389,8 +4355,6 @@ static int sctp_getsockopt_local_addrs(struct sock *sk, int len, } copy_getaddrs: - sctp_read_unlock(addr_lock); - if (copy_to_user(to, addrs, bytes_copied)) { err = -EFAULT; goto out; @@ -4401,12 +4365,6 @@ copy_getaddrs: } if (put_user(bytes_copied, optlen)) err = -EFAULT; - - goto out; - -error_lock: - sctp_read_unlock(addr_lock); - out: kfree(addrs); return err; -- cgit v1.2.3-70-g09d2 From 31bac44468257986484703cc09da8a9dcae88a36 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 16 Sep 2007 16:19:20 -0700 Subject: [PPP] pppoe: Fix skb_unshare_check call position The skb_unshare_check call needs to be made before pskb_may_pull, not after. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/pppoe.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 68631a5721a..5ac3eff6a2a 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -385,12 +385,12 @@ static int pppoe_rcv(struct sk_buff *skb, struct pppoe_hdr *ph; struct pppox_sock *po; - if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr))) - goto drop; - if (!(skb = skb_share_check(skb, GFP_ATOMIC))) goto out; + if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr))) + goto drop; + ph = pppoe_hdr(skb); po = get_item((unsigned long) ph->sid, eth_hdr(skb)->h_source, dev->ifindex); -- cgit v1.2.3-70-g09d2 From db7bf6d97c6956b7eb0f22131cb5c37bd41f33c0 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 16 Sep 2007 16:19:50 -0700 Subject: [PPP] pppoe: Fix data clobbering in __pppoe_xmit and return value The function __pppoe_xmit modifies the skb data and therefore it needs to copy and skb data if it's cloned. In fact, it currently allocates a new skb so that it can return 0 in case of error without freeing the original skb. This is totally wrong because returning zero is meant to indicate congestion whereupon pppoe is supposed to wake up the upper layer once the congestion subsides. This makes sense for ppp_async and ppp_sync but is out-of-place for pppoe. This patch makes it always return 1 and free the skb. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/pppoe.c | 50 +++++++++++++------------------------------------- 1 file changed, 13 insertions(+), 37 deletions(-) diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 5ac3eff6a2a..8818253102f 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -850,9 +850,7 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) struct net_device *dev = po->pppoe_dev; struct pppoe_hdr hdr; struct pppoe_hdr *ph; - int headroom = skb_headroom(skb); int data_len = skb->len; - struct sk_buff *skb2; if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED)) goto abort; @@ -866,53 +864,31 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) if (!dev) goto abort; - /* Copy the skb if there is no space for the header. */ - if (headroom < (sizeof(struct pppoe_hdr) + dev->hard_header_len)) { - skb2 = dev_alloc_skb(32+skb->len + - sizeof(struct pppoe_hdr) + - dev->hard_header_len); - - if (skb2 == NULL) - goto abort; - - skb_reserve(skb2, dev->hard_header_len + sizeof(struct pppoe_hdr)); - skb_copy_from_linear_data(skb, skb_put(skb2, skb->len), - skb->len); - } else { - /* Make a clone so as to not disturb the original skb, - * give dev_queue_xmit something it can free. - */ - skb2 = skb_clone(skb, GFP_ATOMIC); - - if (skb2 == NULL) - goto abort; - } + /* Copy the data if there is no space for the header or if it's + * read-only. + */ + if (skb_cow(skb, sizeof(*ph) + dev->hard_header_len)) + goto abort; - ph = (struct pppoe_hdr *) skb_push(skb2, sizeof(struct pppoe_hdr)); + ph = (struct pppoe_hdr *) skb_push(skb, sizeof(struct pppoe_hdr)); memcpy(ph, &hdr, sizeof(struct pppoe_hdr)); - skb2->protocol = __constant_htons(ETH_P_PPP_SES); + skb->protocol = __constant_htons(ETH_P_PPP_SES); - skb_reset_network_header(skb2); + skb_reset_network_header(skb); - skb2->dev = dev; + skb->dev = dev; - dev->hard_header(skb2, dev, ETH_P_PPP_SES, + dev->hard_header(skb, dev, ETH_P_PPP_SES, po->pppoe_pa.remote, NULL, data_len); - /* We're transmitting skb2, and assuming that dev_queue_xmit - * will free it. The generic ppp layer however, is expecting - * that we give back 'skb' (not 'skb2') in case of failure, - * but free it in case of success. - */ - - if (dev_queue_xmit(skb2) < 0) + if (dev_queue_xmit(skb) < 0) goto abort; - kfree_skb(skb); return 1; abort: - return 0; + kfree_skb(skb); + return 1; } -- cgit v1.2.3-70-g09d2 From 9355ec23397af32799038d0e8edbfa5b6f425c27 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 16 Sep 2007 16:20:21 -0700 Subject: [PPP] pppoe: Fill in header directly in __pppoe_xmit This patch removes the hdr variable (which is copied into the skb) and instead sets the header directly in the skb. It also uses __skb_push instead of skb_push since we've just checked using skb_cow for enough head room. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/pppoe.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 8818253102f..bac36546e0b 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -848,19 +848,12 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) { struct pppox_sock *po = pppox_sk(sk); struct net_device *dev = po->pppoe_dev; - struct pppoe_hdr hdr; struct pppoe_hdr *ph; int data_len = skb->len; if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED)) goto abort; - hdr.ver = 1; - hdr.type = 1; - hdr.code = 0; - hdr.sid = po->num; - hdr.length = htons(skb->len); - if (!dev) goto abort; @@ -870,12 +863,17 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) if (skb_cow(skb, sizeof(*ph) + dev->hard_header_len)) goto abort; - ph = (struct pppoe_hdr *) skb_push(skb, sizeof(struct pppoe_hdr)); - memcpy(ph, &hdr, sizeof(struct pppoe_hdr)); - skb->protocol = __constant_htons(ETH_P_PPP_SES); - + __skb_push(skb, sizeof(*ph)); skb_reset_network_header(skb); + ph = pppoe_hdr(skb); + ph->ver = 1; + ph->type = 1; + ph->code = 0; + ph->sid = po->num; + ph->length = htons(data_len); + + skb->protocol = __constant_htons(ETH_P_PPP_SES); skb->dev = dev; dev->hard_header(skb, dev, ETH_P_PPP_SES, -- cgit v1.2.3-70-g09d2 From e081e1e3ef4682802ac63b1e5e26158fb9ca9e90 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 16 Sep 2007 16:20:48 -0700 Subject: [BRIDGE]: Kill clone argument to br_flood_* The clone argument is only used by one caller and that caller can clone the packet itself. This patch moves the clone call into the caller and kills the clone argument. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/bridge/br_device.c | 4 ++-- net/bridge/br_forward.c | 21 +++++---------------- net/bridge/br_input.c | 48 ++++++++++++++++++++++-------------------------- net/bridge/br_private.h | 8 ++------ 4 files changed, 31 insertions(+), 50 deletions(-) diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index 0eded176ce9..99292e8e1d0 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -41,11 +41,11 @@ int br_dev_xmit(struct sk_buff *skb, struct net_device *dev) skb_pull(skb, ETH_HLEN); if (dest[0] & 1) - br_flood_deliver(br, skb, 0); + br_flood_deliver(br, skb); else if ((dst = __br_fdb_get(br, dest)) != NULL) br_deliver(dst->dst, skb); else - br_flood_deliver(br, skb, 0); + br_flood_deliver(br, skb); return 0; } diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c index ada7f495445..bdd7c35c3c7 100644 --- a/net/bridge/br_forward.c +++ b/net/bridge/br_forward.c @@ -100,24 +100,13 @@ void br_forward(const struct net_bridge_port *to, struct sk_buff *skb) } /* called under bridge lock */ -static void br_flood(struct net_bridge *br, struct sk_buff *skb, int clone, +static void br_flood(struct net_bridge *br, struct sk_buff *skb, void (*__packet_hook)(const struct net_bridge_port *p, struct sk_buff *skb)) { struct net_bridge_port *p; struct net_bridge_port *prev; - if (clone) { - struct sk_buff *skb2; - - if ((skb2 = skb_clone(skb, GFP_ATOMIC)) == NULL) { - br->statistics.tx_dropped++; - return; - } - - skb = skb2; - } - prev = NULL; list_for_each_entry_rcu(p, &br->port_list, list) { @@ -148,13 +137,13 @@ static void br_flood(struct net_bridge *br, struct sk_buff *skb, int clone, /* called with rcu_read_lock */ -void br_flood_deliver(struct net_bridge *br, struct sk_buff *skb, int clone) +void br_flood_deliver(struct net_bridge *br, struct sk_buff *skb) { - br_flood(br, skb, clone, __br_deliver); + br_flood(br, skb, __br_deliver); } /* called under bridge lock */ -void br_flood_forward(struct net_bridge *br, struct sk_buff *skb, int clone) +void br_flood_forward(struct net_bridge *br, struct sk_buff *skb) { - br_flood(br, skb, clone, __br_forward); + br_flood(br, skb, __br_forward); } diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c index 6f468fc3357..3a8a015c92e 100644 --- a/net/bridge/br_input.c +++ b/net/bridge/br_input.c @@ -43,7 +43,7 @@ int br_handle_frame_finish(struct sk_buff *skb) struct net_bridge_port *p = rcu_dereference(skb->dev->br_port); struct net_bridge *br; struct net_bridge_fdb_entry *dst; - int passedup = 0; + struct sk_buff *skb2; if (!p || p->state == BR_STATE_DISABLED) goto drop; @@ -55,39 +55,35 @@ int br_handle_frame_finish(struct sk_buff *skb) if (p->state == BR_STATE_LEARNING) goto drop; - if (br->dev->flags & IFF_PROMISC) { - struct sk_buff *skb2; + /* The packet skb2 goes to the local host (NULL to skip). */ + skb2 = NULL; - skb2 = skb_clone(skb, GFP_ATOMIC); - if (skb2 != NULL) { - passedup = 1; - br_pass_frame_up(br, skb2); - } - } + if (br->dev->flags & IFF_PROMISC) + skb2 = skb; + + dst = NULL; if (is_multicast_ether_addr(dest)) { br->statistics.multicast++; - br_flood_forward(br, skb, !passedup); - if (!passedup) - br_pass_frame_up(br, skb); - goto out; + skb2 = skb; + } else if ((dst = __br_fdb_get(br, dest)) && dst->is_local) { + skb2 = skb; + /* Do not forward the packet since it's local. */ + skb = NULL; } - dst = __br_fdb_get(br, dest); - if (dst != NULL && dst->is_local) { - if (!passedup) - br_pass_frame_up(br, skb); - else - kfree_skb(skb); - goto out; - } + if (skb2 == skb) + skb2 = skb_clone(skb, GFP_ATOMIC); - if (dst != NULL) { - br_forward(dst->dst, skb); - goto out; - } + if (skb2) + br_pass_frame_up(br, skb2); - br_flood_forward(br, skb, 0); + if (skb) { + if (dst) + br_forward(dst->dst, skb); + else + br_flood_forward(br, skb); + } out: return 0; diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 21bf3a9a03f..e6dc6f52990 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -170,12 +170,8 @@ extern int br_dev_queue_push_xmit(struct sk_buff *skb); extern void br_forward(const struct net_bridge_port *to, struct sk_buff *skb); extern int br_forward_finish(struct sk_buff *skb); -extern void br_flood_deliver(struct net_bridge *br, - struct sk_buff *skb, - int clone); -extern void br_flood_forward(struct net_bridge *br, - struct sk_buff *skb, - int clone); +extern void br_flood_deliver(struct net_bridge *br, struct sk_buff *skb); +extern void br_flood_forward(struct net_bridge *br, struct sk_buff *skb); /* br_if.c */ extern void br_port_carrier_check(struct net_bridge_port *p); -- cgit v1.2.3-70-g09d2 From d9cc20484e5e48c6a5deb4387c20fd45bfbdde8c Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 16 Sep 2007 16:21:16 -0700 Subject: [NET] skbuff: Add skb_cow_head This patch adds an optimised version of skb_cow that avoids the copy if the header can be modified even if the rest of the payload is cloned. This can be used in encapsulating paths where we only need to modify the header. As it is, this can be used in PPPOE and bridging. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/pppoe.c | 2 +- include/linux/skbuff.h | 40 +++++++++++++++++++++++++++++++--------- net/bridge/br_netfilter.c | 2 +- 3 files changed, 33 insertions(+), 11 deletions(-) diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index bac36546e0b..0d7f570b9a5 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -860,7 +860,7 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) /* Copy the data if there is no space for the header or if it's * read-only. */ - if (skb_cow(skb, sizeof(*ph) + dev->hard_header_len)) + if (skb_cow_head(skb, sizeof(*ph) + dev->hard_header_len)) goto abort; __skb_push(skb, sizeof(*ph)); diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 93c27f71122..a656cecd373 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1352,6 +1352,22 @@ static inline int skb_clone_writable(struct sk_buff *skb, int len) skb_headroom(skb) + len <= skb->hdr_len; } +static inline int __skb_cow(struct sk_buff *skb, unsigned int headroom, + int cloned) +{ + int delta = 0; + + if (headroom < NET_SKB_PAD) + headroom = NET_SKB_PAD; + if (headroom > skb_headroom(skb)) + delta = headroom - skb_headroom(skb); + + if (delta || cloned) + return pskb_expand_head(skb, ALIGN(delta, NET_SKB_PAD), 0, + GFP_ATOMIC); + return 0; +} + /** * skb_cow - copy header of skb when it is required * @skb: buffer to cow @@ -1366,16 +1382,22 @@ static inline int skb_clone_writable(struct sk_buff *skb, int len) */ static inline int skb_cow(struct sk_buff *skb, unsigned int headroom) { - int delta = (headroom > NET_SKB_PAD ? headroom : NET_SKB_PAD) - - skb_headroom(skb); - - if (delta < 0) - delta = 0; + return __skb_cow(skb, headroom, skb_cloned(skb)); +} - if (delta || skb_cloned(skb)) - return pskb_expand_head(skb, (delta + (NET_SKB_PAD-1)) & - ~(NET_SKB_PAD-1), 0, GFP_ATOMIC); - return 0; +/** + * skb_cow_head - skb_cow but only making the head writable + * @skb: buffer to cow + * @headroom: needed headroom + * + * This function is identical to skb_cow except that we replace the + * skb_cloned check by skb_header_cloned. It should be used when + * you only need to push on some header and do not need to modify + * the data. + */ +static inline int skb_cow_head(struct sk_buff *skb, unsigned int headroom) +{ + return __skb_cow(skb, headroom, skb_header_cloned(skb)); } /** diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index 3ee2022928e..fc13130035e 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -183,7 +183,7 @@ int nf_bridge_copy_header(struct sk_buff *skb) int err; int header_size = ETH_HLEN + nf_bridge_encap_header_len(skb); - err = skb_cow(skb, header_size); + err = skb_cow_head(skb, header_size); if (err) return err; -- cgit v1.2.3-70-g09d2 From 7b797d5b150775d717cb03b5ada28b8bad99afab Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 16 Sep 2007 16:21:42 -0700 Subject: [PPP] generic: Call skb_cow_head before scribbling over skb It's rude to write over data that other people are still using. So call skb_cow_head before PPP proceeds to modify the skb data. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/ppp_generic.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 9293c82ef2a..7e21342becb 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -899,17 +899,9 @@ ppp_start_xmit(struct sk_buff *skb, struct net_device *dev) /* Put the 2-byte PPP protocol number on the front, making sure there is room for the address and control fields. */ - if (skb_headroom(skb) < PPP_HDRLEN) { - struct sk_buff *ns; - - ns = alloc_skb(skb->len + dev->hard_header_len, GFP_ATOMIC); - if (ns == 0) - goto outf; - skb_reserve(ns, dev->hard_header_len); - skb_copy_bits(skb, 0, skb_put(ns, skb->len), skb->len); - kfree_skb(skb); - skb = ns; - } + if (skb_cow_head(skb, PPP_HDRLEN)) + goto outf; + pp = skb_push(skb, 2); proto = npindex_to_proto[npi]; pp[0] = proto >> 8; -- cgit v1.2.3-70-g09d2 From 2a38b775b77f99308a4e571c13d908df78ac5e57 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 16 Sep 2007 16:22:13 -0700 Subject: [PPP] generic: Fix receive path data clobbering & non-linear handling This patch adds missing pskb_may_pull calls to deal with non-linear packets that may arrive from pppoe or pppol2tp. It also copies cloned packets before writing over them. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/ppp_generic.c | 44 +++++++++++++++++++++++++------------------- 1 file changed, 25 insertions(+), 19 deletions(-) diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 7e21342becb..4b49d0e8c7e 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -1525,7 +1525,7 @@ ppp_input_error(struct ppp_channel *chan, int code) static void ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) { - if (skb->len >= 2) { + if (pskb_may_pull(skb, 2)) { #ifdef CONFIG_PPP_MULTILINK /* XXX do channel-level decompression here */ if (PPP_PROTO(skb) == PPP_MP) @@ -1577,7 +1577,7 @@ ppp_receive_nonmp_frame(struct ppp *ppp, struct sk_buff *skb) if (ppp->vj == 0 || (ppp->flags & SC_REJ_COMP_TCP)) goto err; - if (skb_tailroom(skb) < 124) { + if (skb_tailroom(skb) < 124 || skb_cloned(skb)) { /* copy to a new sk_buff with more tailroom */ ns = dev_alloc_skb(skb->len + 128); if (ns == 0) { @@ -1648,23 +1648,29 @@ ppp_receive_nonmp_frame(struct ppp *ppp, struct sk_buff *skb) /* check if the packet passes the pass and active filters */ /* the filter instructions are constructed assuming a four-byte PPP header on each packet */ - *skb_push(skb, 2) = 0; - if (ppp->pass_filter - && sk_run_filter(skb, ppp->pass_filter, - ppp->pass_len) == 0) { - if (ppp->debug & 1) - printk(KERN_DEBUG "PPP: inbound frame not passed\n"); - kfree_skb(skb); - return; - } - if (!(ppp->active_filter - && sk_run_filter(skb, ppp->active_filter, - ppp->active_len) == 0)) - ppp->last_recv = jiffies; - skb_pull(skb, 2); -#else - ppp->last_recv = jiffies; + if (ppp->pass_filter || ppp->active_filter) { + if (skb_cloned(skb) && + pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) + goto err; + + *skb_push(skb, 2) = 0; + if (ppp->pass_filter + && sk_run_filter(skb, ppp->pass_filter, + ppp->pass_len) == 0) { + if (ppp->debug & 1) + printk(KERN_DEBUG "PPP: inbound frame " + "not passed\n"); + kfree_skb(skb); + return; + } + if (!(ppp->active_filter + && sk_run_filter(skb, ppp->active_filter, + ppp->active_len) == 0)) + ppp->last_recv = jiffies; + __skb_pull(skb, 2); + } else #endif /* CONFIG_PPP_FILTER */ + ppp->last_recv = jiffies; if ((ppp->dev->flags & IFF_UP) == 0 || ppp->npmode[npi] != NPMODE_PASS) { @@ -1762,7 +1768,7 @@ ppp_receive_mp_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) struct channel *ch; int mphdrlen = (ppp->flags & SC_MP_SHORTSEQ)? MPHDRLEN_SSN: MPHDRLEN; - if (!pskb_may_pull(skb, mphdrlen) || ppp->mrru == 0) + if (!pskb_may_pull(skb, mphdrlen + 1) || ppp->mrru == 0) goto err; /* no good, throw it away */ /* Decode sequence number and begin/end bits */ -- cgit v1.2.3-70-g09d2 From d9f30ec0b0d129b9cbf2b041a6a3159aa24592f6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 16 Sep 2007 16:43:04 -0700 Subject: [VLAN]: Fix net_device leak. In "[VLAN]: Move device registation to seperate function" (commit e89fe42cd03c8fd3686df82d8390a235717a66de), a pile of code got moved to register_vlan_dev(), including grabbing a reference to underlying device. However, original dev_hold() had been left behind, so we leak a reference to net_device now... Signed-off-by: Al Viro Signed-off-by: David S. Miller --- net/8021q/vlan.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 1583c5ef963..2a546919d6f 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -562,8 +562,6 @@ static int register_vlan_device(struct net_device *real_dev, if (err < 0) goto out_free_newdev; - /* Account for reference in struct vlan_dev_info */ - dev_hold(real_dev); #ifdef VLAN_DEBUG printk(VLAN_DBG "Allocated new device successfully, returning.\n"); #endif -- cgit v1.2.3-70-g09d2 From fa890d586cc127ce72597ba0a909bfecf784e10c Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 16 Sep 2007 17:01:26 -0600 Subject: Fix non-ISA link error in drivers/scsi/advansys.c When CONFIG_ISA is disabled, the isa_driver support will not be compiled in. Define stubs so that we don't get link-time errors. Signed-off-by: Matthew Wilcox Signed-off-by: Linus Torvalds --- include/linux/isa.h | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/include/linux/isa.h b/include/linux/isa.h index 1b855335cb1..b0270e3814c 100644 --- a/include/linux/isa.h +++ b/include/linux/isa.h @@ -22,7 +22,18 @@ struct isa_driver { #define to_isa_driver(x) container_of((x), struct isa_driver, driver) +#ifdef CONFIG_ISA int isa_register_driver(struct isa_driver *, unsigned int); void isa_unregister_driver(struct isa_driver *); +#else +static inline int isa_register_driver(struct isa_driver *d, unsigned int i) +{ + return 0; +} + +static inline void isa_unregister_driver(struct isa_driver *d) +{ +} +#endif #endif /* __LINUX_ISA_H */ -- cgit v1.2.3-70-g09d2 From ff80f1370f2eff7dd7a828cf2416bf7be697247e Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 4 Sep 2007 11:13:15 -0300 Subject: ACPI: thinkpad-acpi: revert new 2.6.23 CONFIG_THINKPAD_ACPI_INPUT_ENABLED option Revert new 2.6.23 CONFIG_THINKPAD_ACPI_INPUT_ENABLED Kconfig option because it would create a legacy we don't want to support. CONFIG_THINKPAD_ACPI_INPUT_ENABLED was added to try to fix an issue that is now moot with the addition of the netlink ACPI event report interface to the ACPI core. Now that ACPI core can send events over netlink, we can use a different strategy to keep backwards compatibility with older userspace, without the need for the CONFIG_THINKPAD_ACPI_INPUT_ENABLED games. And it arrived before CONFIG_THINKPAD_ACPI_INPUT_ENABLED made it to a stable mainline kernel, even, which is Good. This patch is in sync with some changes to thinkpad-acpi backports, that will keep things sane for userspace across different combinations of kernel versions, thinkpad-acpi backports (or the lack thereof), and userspace capabilities: Unless a module parameter is used, thinkpad-acpi will now behave in such a way that it will work well (by default) with userspace that still uses only the old ACPI procfs event interface and doesn't care for thinkpad-acpi input devices. It will also always work well with userspace that has been updated to use both the thinkpad-acpi input devices, and ACPI core netlink event interface, regardless of any module parameter. The module parameter was added to allow thinkpad-acpi to work with userspace that has been partially updated to use thinkpad-acpi input devices, but not the new ACPI core netlink event interface. To use this mode of hot key reporting, one has to specify the hotkey_report_mode=2 module parameter. The thinkpad-acpi driver exports the value of hotkey_report_mode through sysfs, as well. thinkpad-acpi backports to older kernels, that do not support the new ACPI core netlink interface, have code to allow userspace to switch hotkey_report_mode at runtime through sysfs. This capability will not be provided in mainline thinkpad-acpi as it is not needed there. Signed-off-by: Henrique de Moraes Holschuh Cc: Michael S. Tsirkin Cc: Hugh Dickins Cc: Richard Hughes Signed-off-by: Len Brown --- Documentation/thinkpad-acpi.txt | 92 +++++++++++++++++++++----- drivers/misc/Kconfig | 20 ------ drivers/misc/thinkpad_acpi.c | 142 ++++++++++++++++++++++++---------------- drivers/misc/thinkpad_acpi.h | 1 + 4 files changed, 162 insertions(+), 93 deletions(-) diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt index eb2f5986e1e..ca89711f158 100644 --- a/Documentation/thinkpad-acpi.txt +++ b/Documentation/thinkpad-acpi.txt @@ -161,20 +161,22 @@ system. Enabling the hotkey functionality of thinkpad-acpi signals the firmware that such a driver is present, and modifies how the ThinkPad firmware will behave in many situations. +The driver enables the hot key feature automatically when loaded. The +feature can later be disabled and enabled back at runtime. The driver +will also restore the hot key feature to its previous state and mask +when it is unloaded. + When the hotkey feature is enabled and the hot key mask is set (see -below), the various hot keys either generate ACPI events in the -following format: +below), the driver will report HKEY events in the following format: ibm/hotkey HKEY 00000080 0000xxxx -or events over the input layer. The input layer support accepts the -standard IOCTLs to remap the keycodes assigned to each hotkey. +Some of these events refer to hot key presses, but not all. -When the input device is open, the driver will suppress any ACPI hot key -events that get translated into a meaningful input layer event, in order -to avoid sending duplicate events to userspace. Hot keys that are -mapped to KEY_RESERVED in the keymap are not translated, and will always -generate an ACPI ibm/hotkey HKEY event, and no input layer events. +The driver will generate events over the input layer for hot keys and +radio switches, and over the ACPI netlink layer for other events. The +input layer support accepts the standard IOCTLs to remap the keycodes +assigned to each hot key. The hot key bit mask allows some control over which hot keys generate events. If a key is "masked" (bit set to 0 in the mask), the firmware @@ -256,6 +258,20 @@ sysfs notes: disabled" postition, and 1 if the switch is in the "radios enabled" position. + hotkey_report_mode: + Returns the state of the procfs ACPI event report mode + filter for hot keys. If it is set to 1 (the default), + all hot key presses are reported both through the input + layer and also as ACPI events through procfs (but not + through netlink). If it is set to 2, hot key presses + are reported only through the input layer. + + This attribute is read-only in kernels 2.6.23 or later, + and read-write on earlier kernels. + + May return -EPERM (write access locked out by module + parameter) or -EACCES (read-only). + input layer notes: A Hot key is mapped to a single input layer EV_KEY event, possibly @@ -393,21 +409,63 @@ unknown by the driver if the ThinkPad firmware triggered these events on hot key press or release, but the firmware will do it for either one, not both. -If a key is mapped to KEY_RESERVED, it generates no input events at all, -and it may generate a legacy thinkpad-acpi ACPI hotkey event. - +If a key is mapped to KEY_RESERVED, it generates no input events at all. If a key is mapped to KEY_UNKNOWN, it generates an input event that -includes an scan code, and it may also generate a legacy thinkpad-acpi -ACPI hotkey event. - -If a key is mapped to anything else, it will only generate legacy -thinkpad-acpi ACPI hotkey events if nobody has opened the input device. +includes an scan code. If a key is mapped to anything else, it will +generate input device EV_KEY events. Non hot-key ACPI HKEY event map: 0x5001 Lid closed 0x5002 Lid opened 0x7000 Radio Switch may have changed state +The above events are not propagated by the driver, except for legacy +compatibility purposes when hotkey_report_mode is set to 1. + +Compatibility notes: + +ibm-acpi and thinkpad-acpi 0.15 (mainline kernels before 2.6.23) never +supported the input layer, and sent events over the procfs ACPI event +interface. + +To avoid sending duplicate events over the input layer and the ACPI +event interface, thinkpad-acpi 0.16 implements a module parameter +(hotkey_report_mode), and also a sysfs device attribute with the same +name. + +Make no mistake here: userspace is expected to switch to using the input +layer interface of thinkpad-acpi, together with the ACPI netlink event +interface in kernels 2.6.23 and later, or with the ACPI procfs event +interface in kernels 2.6.22 and earlier. + +If no hotkey_report_mode module parameter is specified (or it is set to +zero), the driver defaults to mode 1 (see below), and on kernels 2.6.22 +and earlier, also allows one to change the hotkey_report_mode through +sysfs. In kernels 2.6.23 and later, where the netlink ACPI event +interface is available, hotkey_report_mode cannot be changed through +sysfs (it is read-only). + +If the hotkey_report_mode module parameter is set to 1 or 2, it cannot +be changed later through sysfs (any writes will return -EPERM to signal +that hotkey_report_mode was locked. On 2.6.23 and later, where +hotkey_report_mode cannot be changed at all, writes will return -EACES). + +hotkey_report_mode set to 1 makes the driver export through the procfs +ACPI event interface all hot key presses (which are *also* sent to the +input layer). This is a legacy compatibility behaviour, and it is also +the default mode of operation for the driver. + +hotkey_report_mode set to 2 makes the driver filter out the hot key +presses from the procfs ACPI event interface, so these events will only +be sent through the input layer. Userspace that has been updated to use +the thinkpad-acpi input layer interface should set hotkey_report_mode to +2. + +Hot key press events are never sent to the ACPI netlink event interface. +Really up-to-date userspace under kernel 2.6.23 and later is to use the +netlink interface and the input layer interface, and don't bother at all +with hotkey_report_mode. + Bluetooth --------- diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index a26655881e6..73e248fb2ff 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -202,25 +202,5 @@ config THINKPAD_ACPI_BAY If you are not sure, say Y here. -config THINKPAD_ACPI_INPUT_ENABLED - bool "Enable input layer support by default" - depends on THINKPAD_ACPI - default n - ---help--- - This option enables thinkpad-acpi hot key handling over the input - layer at driver load time. When it is unset, the driver does not - enable hot key handling by default, and also starts up with a mostly - empty keymap. - - This option should be enabled if you have a new enough HAL or other - userspace support that properly handles the thinkpad-acpi event - device. It auto-tunes the hot key support to those reported by the - firmware and enables it automatically. - - If unsure, say N here to retain the old behaviour of ibm-acpi, and - thinkpad-acpi up to kernel 2.6.21: userspace will have to enable and - set up the thinkpad-acpi hot key handling using the sysfs interace - after loading the driver. - endif # MISC_DEVICES diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index bb8956d0c10..3d849d13657 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -906,9 +906,26 @@ static ssize_t hotkey_radio_sw_show(struct device *dev, static struct device_attribute dev_attr_hotkey_radio_sw = __ATTR(hotkey_radio_sw, S_IRUGO, hotkey_radio_sw_show, NULL); +/* sysfs hotkey report_mode -------------------------------------------- */ +static ssize_t hotkey_report_mode_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", + (hotkey_report_mode != 0) ? hotkey_report_mode : 1); +} + +static struct device_attribute dev_attr_hotkey_report_mode = + __ATTR(hotkey_report_mode, S_IRUGO, hotkey_report_mode_show, NULL); + /* --------------------------------------------------------------------- */ -static struct attribute *hotkey_mask_attributes[] = { +static struct attribute *hotkey_attributes[] __initdata = { + &dev_attr_hotkey_enable.attr, + &dev_attr_hotkey_report_mode.attr, +}; + +static struct attribute *hotkey_mask_attributes[] __initdata = { &dev_attr_hotkey_mask.attr, &dev_attr_hotkey_bios_enabled.attr, &dev_attr_hotkey_bios_mask.attr, @@ -987,11 +1004,12 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) str_supported(tp_features.hotkey)); if (tp_features.hotkey) { - hotkey_dev_attributes = create_attr_set(7, NULL); + hotkey_dev_attributes = create_attr_set(8, NULL); if (!hotkey_dev_attributes) return -ENOMEM; - res = add_to_attr_set(hotkey_dev_attributes, - &dev_attr_hotkey_enable.attr); + res = add_many_to_attr_set(hotkey_dev_attributes, + hotkey_attributes, + ARRAY_SIZE(hotkey_attributes)); if (res) return res; @@ -1055,11 +1073,6 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) TPACPI_HOTKEY_MAP_SIZE); } -#ifndef CONFIG_THINKPAD_ACPI_INPUT_ENABLED - for (i = 0; i < 12; i++) - hotkey_keycode_map[i] = KEY_UNKNOWN; -#endif /* ! CONFIG_THINKPAD_ACPI_INPUT_ENABLED */ - set_bit(EV_KEY, tpacpi_inputdev->evbit); set_bit(EV_MSC, tpacpi_inputdev->evbit); set_bit(MSC_SCAN, tpacpi_inputdev->mscbit); @@ -1081,14 +1094,17 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) set_bit(SW_RADIO, tpacpi_inputdev->swbit); } -#ifdef CONFIG_THINKPAD_ACPI_INPUT_ENABLED dbg_printk(TPACPI_DBG_INIT, "enabling hot key handling\n"); res = hotkey_set(1, (hotkey_all_mask & ~hotkey_reserved_mask) | hotkey_orig_mask); if (res) return res; -#endif /* CONFIG_THINKPAD_ACPI_INPUT_ENABLED */ + + dbg_printk(TPACPI_DBG_INIT, + "legacy hot key reporting over procfs %s\n", + (hotkey_report_mode < 2) ? + "enabled" : "disabled"); } return (tp_features.hotkey)? 0 : 1; @@ -1142,58 +1158,65 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) { u32 hkey; unsigned int keycode, scancode; - int sendacpi = 1; + int send_acpi_ev = 0; if (event == 0x80 && acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) { - if (tpacpi_inputdev->users > 0) { - switch (hkey >> 12) { - case 1: - /* 0x1000-0x1FFF: key presses */ - scancode = hkey & 0xfff; - if (scancode > 0 && scancode < 0x21) { - scancode--; - keycode = hotkey_keycode_map[scancode]; - tpacpi_input_send_key(scancode, keycode); - sendacpi = (keycode == KEY_RESERVED - || keycode == KEY_UNKNOWN); - } else { - printk(IBM_ERR - "hotkey 0x%04x out of range for keyboard map\n", - hkey); - } - break; - case 5: - /* 0x5000-0x5FFF: LID */ - /* we don't handle it through this path, just - * eat up known LID events */ - if (hkey != 0x5001 && hkey != 0x5002) { - printk(IBM_ERR - "unknown LID-related hotkey event: 0x%04x\n", - hkey); - } + switch (hkey >> 12) { + case 1: + /* 0x1000-0x1FFF: key presses */ + scancode = hkey & 0xfff; + if (scancode > 0 && scancode < 0x21) { + scancode--; + keycode = hotkey_keycode_map[scancode]; + tpacpi_input_send_key(scancode, keycode); + } else { + printk(IBM_ERR + "hotkey 0x%04x out of range for keyboard map\n", + hkey); + send_acpi_ev = 1; + } + break; + case 5: + /* 0x5000-0x5FFF: LID */ + /* we don't handle it through this path, just + * eat up known LID events */ + if (hkey != 0x5001 && hkey != 0x5002) { + printk(IBM_ERR + "unknown LID-related hotkey event: 0x%04x\n", + hkey); + send_acpi_ev = 1; + } + break; + case 7: + /* 0x7000-0x7FFF: misc */ + if (tp_features.hotkey_wlsw && hkey == 0x7000) { + tpacpi_input_send_radiosw(); break; - case 7: - /* 0x7000-0x7FFF: misc */ - if (tp_features.hotkey_wlsw && hkey == 0x7000) { - tpacpi_input_send_radiosw(); - sendacpi = 0; - break; - } - /* fallthrough to default */ - default: - /* case 2: dock-related */ - /* 0x2305 - T43 waking up due to bay lever eject while aslept */ - /* case 3: ultra-bay related. maybe bay in dock? */ - /* 0x3003 - T43 after wake up by bay lever eject (0x2305) */ - printk(IBM_NOTICE "unhandled hotkey event 0x%04x\n", hkey); } + /* fallthrough to default */ + default: + /* case 2: dock-related */ + /* 0x2305 - T43 waking up due to bay lever eject while aslept */ + /* case 3: ultra-bay related. maybe bay in dock? */ + /* 0x3003 - T43 after wake up by bay lever eject (0x2305) */ + printk(IBM_NOTICE "unhandled HKEY event 0x%04x\n", hkey); + send_acpi_ev = 1; } - - if (sendacpi) - acpi_bus_generate_proc_event(ibm->acpi->device, event, hkey); } else { printk(IBM_ERR "unknown hotkey notification event %d\n", event); - acpi_bus_generate_proc_event(ibm->acpi->device, event, 0); + hkey = 0; + send_acpi_ev = 1; + } + + /* Legacy events */ + if (send_acpi_ev || hotkey_report_mode < 2) + acpi_bus_generate_proc_event(ibm->acpi->device, event, hkey); + + /* netlink events */ + if (send_acpi_ev) { + acpi_bus_generate_netlink_event(ibm->acpi->device->pnp.device_class, + ibm->acpi->device->dev.bus_id, + event, hkey); } } @@ -4623,6 +4646,9 @@ module_param_named(fan_control, fan_control_allowed, bool, 0); static int brightness_mode; module_param_named(brightness_mode, brightness_mode, int, 0); +static unsigned int hotkey_report_mode; +module_param(hotkey_report_mode, uint, 0); + #define IBM_PARAM(feature) \ module_param_call(feature, set_ibm_param, NULL, NULL, 0) @@ -4648,6 +4674,10 @@ static int __init thinkpad_acpi_module_init(void) { int ret, i; + /* Parameter checking */ + if (hotkey_report_mode > 2) + return -EINVAL; + /* Driver-level probe */ get_thinkpad_model_data(&thinkpad_id); diff --git a/drivers/misc/thinkpad_acpi.h b/drivers/misc/thinkpad_acpi.h index eee8809a50d..082a1cbc16c 100644 --- a/drivers/misc/thinkpad_acpi.h +++ b/drivers/misc/thinkpad_acpi.h @@ -181,6 +181,7 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv); static int experimental; static u32 dbg_level; static int force_load; +static unsigned int hotkey_report_mode; static int thinkpad_acpi_module_init(void); static void thinkpad_acpi_module_exit(void); -- cgit v1.2.3-70-g09d2 From 3b0c6485a733f5f0f5c362fb094df1466b18ab93 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 4 Sep 2007 11:13:16 -0300 Subject: ACPI: thinkpad-acpi: bump up version to 0.16 Name it thinkpad-acpi version 0.16 to avoid any confusion with some 0.15 thinkpad-acpi development snapshots and backports that had input layer support, but no hotkey_report_mode support. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/thinkpad-acpi.txt | 4 ++-- drivers/misc/thinkpad_acpi.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/thinkpad-acpi.txt b/Documentation/thinkpad-acpi.txt index ca89711f158..60953d6c919 100644 --- a/Documentation/thinkpad-acpi.txt +++ b/Documentation/thinkpad-acpi.txt @@ -1,7 +1,7 @@ ThinkPad ACPI Extras Driver - Version 0.15 - July 1st, 2007 + Version 0.16 + August 2nd, 2007 Borislav Deianov Henrique de Moraes Holschuh diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 3d849d13657..0222bbaf7b7 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -21,7 +21,7 @@ * 02110-1301, USA. */ -#define IBM_VERSION "0.15" +#define IBM_VERSION "0.16" #define TPACPI_SYSFS_VERSION 0x010000 /* -- cgit v1.2.3-70-g09d2 From 65de5567564e70edd01b6d4e95e548d7ba284872 Mon Sep 17 00:00:00 2001 From: David Chinner Date: Thu, 16 Aug 2007 15:21:11 +1000 Subject: [XFS] On-demand reaping of the MRU cache Instead of running the mru cache reaper all the time based on a timeout, we should only run it when the cache has active objects. This allows CPUs to sleep when there is no activity rather than be woken repeatedly just to check if there is anything to do. SGI-PV: 968554 SGI-Modid: xfs-linux-melb:xfs-kern:29305a Signed-off-by: David Chinner Signed-off-by: Donald Douwsma Signed-off-by: Tim Shimmin --- fs/xfs/xfs_filestream.c | 3 +-- fs/xfs/xfs_mru_cache.c | 72 +++++++++++++++++++------------------------------ fs/xfs/xfs_mru_cache.h | 6 ++--- 3 files changed, 31 insertions(+), 50 deletions(-) diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c index ce2278611bb..16f8e175167 100644 --- a/fs/xfs/xfs_filestream.c +++ b/fs/xfs/xfs_filestream.c @@ -467,8 +467,7 @@ void xfs_filestream_flush( xfs_mount_t *mp) { - /* point in time flush, so keep the reaper running */ - xfs_mru_cache_flush(mp->m_filestream, 1); + xfs_mru_cache_flush(mp->m_filestream); } /* diff --git a/fs/xfs/xfs_mru_cache.c b/fs/xfs/xfs_mru_cache.c index 7deb9e3cbbd..e0b358c1c53 100644 --- a/fs/xfs/xfs_mru_cache.c +++ b/fs/xfs/xfs_mru_cache.c @@ -206,8 +206,11 @@ _xfs_mru_cache_list_insert( */ if (!_xfs_mru_cache_migrate(mru, now)) { mru->time_zero = now; - if (!mru->next_reap) - mru->next_reap = mru->grp_count * mru->grp_time; + if (!mru->queued) { + mru->queued = 1; + queue_delayed_work(xfs_mru_reap_wq, &mru->work, + mru->grp_count * mru->grp_time); + } } else { grp = (now - mru->time_zero) / mru->grp_time; grp = (mru->lru_grp + grp) % mru->grp_count; @@ -271,29 +274,26 @@ _xfs_mru_cache_reap( struct work_struct *work) { xfs_mru_cache_t *mru = container_of(work, xfs_mru_cache_t, work.work); - unsigned long now; + unsigned long now, next; ASSERT(mru && mru->lists); if (!mru || !mru->lists) return; mutex_spinlock(&mru->lock); - now = jiffies; - if (mru->reap_all || - (mru->next_reap && time_after(now, mru->next_reap))) { - if (mru->reap_all) - now += mru->grp_count * mru->grp_time * 2; - mru->next_reap = _xfs_mru_cache_migrate(mru, now); - _xfs_mru_cache_clear_reap_list(mru); + next = _xfs_mru_cache_migrate(mru, jiffies); + _xfs_mru_cache_clear_reap_list(mru); + + mru->queued = next; + if ((mru->queued > 0)) { + now = jiffies; + if (next <= now) + next = 0; + else + next -= now; + queue_delayed_work(xfs_mru_reap_wq, &mru->work, next); } - /* - * the process that triggered the reap_all is responsible - * for restating the periodic reap if it is required. - */ - if (!mru->reap_all) - queue_delayed_work(xfs_mru_reap_wq, &mru->work, mru->grp_time); - mru->reap_all = 0; mutex_spinunlock(&mru->lock, 0); } @@ -352,7 +352,7 @@ xfs_mru_cache_create( /* An extra list is needed to avoid reaping up to a grp_time early. */ mru->grp_count = grp_count + 1; - mru->lists = kmem_alloc(mru->grp_count * sizeof(*mru->lists), KM_SLEEP); + mru->lists = kmem_zalloc(mru->grp_count * sizeof(*mru->lists), KM_SLEEP); if (!mru->lists) { err = ENOMEM; @@ -374,11 +374,6 @@ xfs_mru_cache_create( mru->grp_time = grp_time; mru->free_func = free_func; - /* start up the reaper event */ - mru->next_reap = 0; - mru->reap_all = 0; - queue_delayed_work(xfs_mru_reap_wq, &mru->work, mru->grp_time); - *mrup = mru; exit: @@ -394,35 +389,25 @@ exit: * Call xfs_mru_cache_flush() to flush out all cached entries, calling their * free functions as they're deleted. When this function returns, the caller is * guaranteed that all the free functions for all the elements have finished - * executing. - * - * While we are flushing, we stop the periodic reaper event from triggering. - * Normally, we want to restart this periodic event, but if we are shutting - * down the cache we do not want it restarted. hence the restart parameter - * where 0 = do not restart reaper and 1 = restart reaper. + * executing and the reaper is not running. */ void xfs_mru_cache_flush( - xfs_mru_cache_t *mru, - int restart) + xfs_mru_cache_t *mru) { if (!mru || !mru->lists) return; - cancel_rearming_delayed_workqueue(xfs_mru_reap_wq, &mru->work); - mutex_spinlock(&mru->lock); - mru->reap_all = 1; - mutex_spinunlock(&mru->lock, 0); + if (mru->queued) { + mutex_spinunlock(&mru->lock, 0); + cancel_rearming_delayed_workqueue(xfs_mru_reap_wq, &mru->work); + mutex_spinlock(&mru->lock); + } - queue_work(xfs_mru_reap_wq, &mru->work.work); - flush_workqueue(xfs_mru_reap_wq); + _xfs_mru_cache_migrate(mru, jiffies + mru->grp_count * mru->grp_time); + _xfs_mru_cache_clear_reap_list(mru); - mutex_spinlock(&mru->lock); - WARN_ON_ONCE(mru->reap_all != 0); - mru->reap_all = 0; - if (restart) - queue_delayed_work(xfs_mru_reap_wq, &mru->work, mru->grp_time); mutex_spinunlock(&mru->lock, 0); } @@ -433,8 +418,7 @@ xfs_mru_cache_destroy( if (!mru || !mru->lists) return; - /* we don't want the reaper to restart here */ - xfs_mru_cache_flush(mru, 0); + xfs_mru_cache_flush(mru); kmem_free(mru->lists, mru->grp_count * sizeof(*mru->lists)); kmem_free(mru, sizeof(*mru)); diff --git a/fs/xfs/xfs_mru_cache.h b/fs/xfs/xfs_mru_cache.h index 624fd10ee8e..dd58ea1bbeb 100644 --- a/fs/xfs/xfs_mru_cache.h +++ b/fs/xfs/xfs_mru_cache.h @@ -32,11 +32,9 @@ typedef struct xfs_mru_cache unsigned int grp_time; /* Time period spanned by grps. */ unsigned int lru_grp; /* Group containing time zero. */ unsigned long time_zero; /* Time first element was added. */ - unsigned long next_reap; /* Time that the reaper should - next do something. */ - unsigned int reap_all; /* if set, reap all lists */ xfs_mru_cache_free_func_t free_func; /* Function pointer for freeing. */ struct delayed_work work; /* Workqueue data for reaping. */ + unsigned int queued; /* work has been queued */ } xfs_mru_cache_t; int xfs_mru_cache_init(void); @@ -44,7 +42,7 @@ void xfs_mru_cache_uninit(void); int xfs_mru_cache_create(struct xfs_mru_cache **mrup, unsigned int lifetime_ms, unsigned int grp_count, xfs_mru_cache_free_func_t free_func); -void xfs_mru_cache_flush(xfs_mru_cache_t *mru, int restart); +void xfs_mru_cache_flush(xfs_mru_cache_t *mru); void xfs_mru_cache_destroy(struct xfs_mru_cache *mru); int xfs_mru_cache_insert(struct xfs_mru_cache *mru, unsigned long key, void *value); -- cgit v1.2.3-70-g09d2 From 7062cdc5edb3ba4b2eb906684cd19e103de1f920 Mon Sep 17 00:00:00 2001 From: Jorge Juan Chico Date: Mon, 17 Sep 2007 12:35:30 +0200 Subject: ide: ST320413A has the same problem as ST340823A ST320413A has the same problem as ST340823A. Please see https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.15/+bug/26119 From: "Jorge Juan Chico" Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index eba1adbc1b6..4754769eda9 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -487,6 +487,7 @@ static inline int idedisk_supports_lba48(const struct hd_driveid *id) */ static const struct drive_list_entry hpa_list[] = { { "ST340823A", NULL }, + { "ST320413A", NULL }, { NULL, NULL } }; -- cgit v1.2.3-70-g09d2 From 588a33556ccf3e2135c7b4527557616f72fc144c Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 17 Sep 2007 12:35:30 +0200 Subject: ide: remove unused variables from drivers/ide/ppc/pmac.c Removes these warnings: /home/sfr/kernels/linus/drivers/ide/ppc/pmac.c: In function 'pmac_ide_dma_check': /home/sfr/kernels/linus/drivers/ide/ppc/pmac.c:1807: warning: unused variable 'map' /home/sfr/kernels/linus/drivers/ide/ppc/pmac.c:1805: warning: unused variable 'pmif' Signed-off-by: Stephen Rothwell Cc: paulus@samba.org Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ppc/pmac.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 4b13cd9a027..f19eb6daeef 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1802,9 +1802,7 @@ pmac_ide_dma_check(ide_drive_t *drive) { struct hd_driveid *id = drive->id; ide_hwif_t *hwif = HWIF(drive); - pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data; int enable = 1; - int map; drive->using_dma = 0; if (drive->media == ide_floppy) -- cgit v1.2.3-70-g09d2 From e53dd083be96a3272df16a675f14c8396cb744ec Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 15 Sep 2007 07:38:47 -0300 Subject: Revert "V4L/DVB (6173a): Documentation: Remove reference to dead "cpia_pp=" boot-time option" This reverts commit 4730d3af625b532e3df5f091b5c8edb08f512fbf. Unfortunately, patch got mangled by a whitespace removal script. Signed-off-by: Mauro Carvalho Chehab --- Documentation/kernel-parameters.txt | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 586b6f85d4e..b41cde31d11 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1,5 +1,5 @@ - Kernel Parameters - ~~~~~~~~~~~~~~~~~ + Kernel Parameters + ~~~~~~~~~~~~~~~~~ The following is a consolidated list of the kernel parameters as implemented (mostly) by the __setup() macro and sorted into English Dictionary order @@ -468,6 +468,9 @@ and is between 256 and 4096 characters. It is defined in the file Format: ,,,[,] + cpia_pp= [HW,PPT] + Format: { parport | auto | none } + crashkernel=nn[KMG]@ss[KMG] [KNL] Reserve a chunk of physical memory to hold a kernel to switch to with kexec on panic. @@ -1462,7 +1465,7 @@ and is between 256 and 4096 characters. It is defined in the file reboot= [BUGS=X86-32,BUGS=ARM,BUGS=IA-64] Rebooting mode Format: [,[,...]] - See arch/*/kernel/reboot.c or arch/*/kernel/process.c + See arch/*/kernel/reboot.c or arch/*/kernel/process.c reserve= [KNL,BUGS] Force the kernel to ignore some iomem area @@ -1550,12 +1553,12 @@ and is between 256 and 4096 characters. It is defined in the file selinux_compat_net = [SELINUX] Set initial selinux_compat_net flag value. - Format: { "0" | "1" } - 0 -- use new secmark-based packet controls - 1 -- use legacy packet controls - Default value is 0 (preferred). - Value can be changed at runtime via - /selinux/compat_net. + Format: { "0" | "1" } + 0 -- use new secmark-based packet controls + 1 -- use legacy packet controls + Default value is 0 (preferred). + Value can be changed at runtime via + /selinux/compat_net. serialnumber [BUGS=X86-32] @@ -1954,7 +1957,7 @@ and is between 256 and 4096 characters. It is defined in the file norandmaps Don't use address space randomization Equivalent to echo 0 > /proc/sys/kernel/randomize_va_space - unwind_debug=N N > 0 will enable dwarf2 unwinder debugging + unwind_debug=N N > 0 will enable dwarf2 unwinder debugging This is useful to get more information why you got a "dwarf2 unwinder stuck" -- cgit v1.2.3-70-g09d2 From b20c8e8e86190d60627a59d99ce2ac6ffcbc704d Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Mon, 3 Sep 2007 09:35:04 -0300 Subject: V4L/DVB (6173a): Documentation: Remove reference to dead "cpia_pp=" boot-time option Since this boot-time option was removed in commit 9ab7e323af9f9efad3e20a14faa4d947adfac381, delete the reference to it. Signed-off-by: Robert P. J. Day Signed-off-by: Mauro Carvalho Chehab --- Documentation/kernel-parameters.txt | 3 --- 1 file changed, 3 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b41cde31d11..4d175c75124 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -468,9 +468,6 @@ and is between 256 and 4096 characters. It is defined in the file Format: ,,,[,] - cpia_pp= [HW,PPT] - Format: { parport | auto | none } - crashkernel=nn[KMG]@ss[KMG] [KNL] Reserve a chunk of physical memory to hold a kernel to switch to with kexec on panic. -- cgit v1.2.3-70-g09d2 From 9c5b34806c28195e4d0f2deaa41d8158ca5874e1 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 17 Sep 2007 16:47:07 -0700 Subject: [SUNSAB]: Fix several bugs. * don't register irq until ->startup() (and release in ->shutdown()). That avoids oopsen with the current tree when interrupt comes before we'd set up the data structures for ttyb. * handle console=ttyS... even when OBP talks to screen/keyboard * register irq handler for each port, let kernel/irq/handle.c call it for both if needed. Kills code duplication in sunsab_interrupt(). BTW, there'd been bitrot in it - ttya handling had stopped calling check_status() on BRK (correctly), ttyb copy of that code had kept the bogus call in that case. Signed-off-by: Al Viro Signed-off-by: David S. Miller --- drivers/serial/sunsab.c | 107 +++++++++++++++++++----------------------------- 1 file changed, 42 insertions(+), 65 deletions(-) diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index bca57bb9493..e348ba68405 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -58,6 +58,7 @@ struct uart_sunsab_port { unsigned char interrupt_mask1;/* ISR1 masking */ unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */ unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */ + unsigned int gis_shift; int type; /* SAB82532 version */ /* Setting configuration bits while the transmitter is active @@ -305,13 +306,15 @@ static irqreturn_t sunsab_interrupt(int irq, void *dev_id) struct tty_struct *tty; union sab82532_irq_status status; unsigned long flags; + unsigned char gis; spin_lock_irqsave(&up->port.lock, flags); status.stat = 0; - if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA0) + gis = readb(&up->regs->r.gis) >> up->gis_shift; + if (gis & 1) status.sreg.isr0 = readb(&up->regs->r.isr0); - if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA1) + if (gis & 2) status.sreg.isr1 = readb(&up->regs->r.isr1); tty = NULL; @@ -327,35 +330,6 @@ static irqreturn_t sunsab_interrupt(int irq, void *dev_id) transmit_chars(up, &status); } - spin_unlock(&up->port.lock); - - if (tty) - tty_flip_buffer_push(tty); - - up++; - - spin_lock(&up->port.lock); - - status.stat = 0; - if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB0) - status.sreg.isr0 = readb(&up->regs->r.isr0); - if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB1) - status.sreg.isr1 = readb(&up->regs->r.isr1); - - tty = NULL; - if (status.stat) { - if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | - SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) || - (status.sreg.isr1 & SAB82532_ISR1_BRK)) - - tty = receive_chars(up, &status); - if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) || - (status.sreg.isr1 & (SAB82532_ISR1_BRK | SAB82532_ISR1_CSC))) - check_status(up, &status); - if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR)) - transmit_chars(up, &status); - } - spin_unlock_irqrestore(&up->port.lock, flags); if (tty) @@ -539,6 +513,10 @@ static int sunsab_startup(struct uart_port *port) struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; unsigned long flags; unsigned char tmp; + int err = request_irq(up->port.irq, sunsab_interrupt, + IRQF_SHARED, "sab", up); + if (err) + return err; spin_lock_irqsave(&up->port.lock, flags); @@ -641,6 +619,7 @@ static void sunsab_shutdown(struct uart_port *port) #endif spin_unlock_irqrestore(&up->port.lock, flags); + free_irq(up->port.irq, up); } /* @@ -1008,9 +987,11 @@ static int __devinit sunsab_init_one(struct uart_sunsab_port *up, if ((up->port.line & 0x1) == 0) { up->pvr_dsr_bit = (1 << 0); up->pvr_dtr_bit = (1 << 1); + up->gis_shift = 2; } else { up->pvr_dsr_bit = (1 << 3); up->pvr_dtr_bit = (1 << 2); + up->gis_shift = 0; } up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4); writeb(up->cached_pvr, &up->regs->w.pvr); @@ -1023,19 +1004,6 @@ static int __devinit sunsab_init_one(struct uart_sunsab_port *up, up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT; up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT; - if (!(up->port.line & 0x01)) { - int err; - - err = request_irq(up->port.irq, sunsab_interrupt, - IRQF_SHARED, "sab", up); - if (err) { - of_iounmap(&op->resource[0], - up->port.membase, - sizeof(union sab82532_async_regs)); - return err; - } - } - return 0; } @@ -1051,52 +1019,60 @@ static int __devinit sab_probe(struct of_device *op, const struct of_device_id * 0, (inst * 2) + 0); if (err) - return err; + goto out; err = sunsab_init_one(&up[1], op, sizeof(union sab82532_async_regs), (inst * 2) + 1); - if (err) { - of_iounmap(&op->resource[0], - up[0].port.membase, - sizeof(union sab82532_async_regs)); - free_irq(up[0].port.irq, &up[0]); - return err; - } + if (err) + goto out1; sunserial_console_match(SUNSAB_CONSOLE(), op->node, &sunsab_reg, up[0].port.line); - uart_add_one_port(&sunsab_reg, &up[0].port); sunserial_console_match(SUNSAB_CONSOLE(), op->node, &sunsab_reg, up[1].port.line); - uart_add_one_port(&sunsab_reg, &up[1].port); + + err = uart_add_one_port(&sunsab_reg, &up[0].port); + if (err) + goto out2; + + err = uart_add_one_port(&sunsab_reg, &up[1].port); + if (err) + goto out3; dev_set_drvdata(&op->dev, &up[0]); inst++; return 0; -} - -static void __devexit sab_remove_one(struct uart_sunsab_port *up) -{ - struct of_device *op = to_of_device(up->port.dev); - uart_remove_one_port(&sunsab_reg, &up->port); - if (!(up->port.line & 1)) - free_irq(up->port.irq, up); +out3: + uart_remove_one_port(&sunsab_reg, &up[0].port); +out2: of_iounmap(&op->resource[0], - up->port.membase, + up[1].port.membase, sizeof(union sab82532_async_regs)); +out1: + of_iounmap(&op->resource[0], + up[0].port.membase, + sizeof(union sab82532_async_regs)); +out: + return err; } static int __devexit sab_remove(struct of_device *op) { struct uart_sunsab_port *up = dev_get_drvdata(&op->dev); - sab_remove_one(&up[0]); - sab_remove_one(&up[1]); + uart_remove_one_port(&sunsab_reg, &up[1].port); + uart_remove_one_port(&sunsab_reg, &up[0].port); + of_iounmap(&op->resource[0], + up[1].port.membase, + sizeof(union sab82532_async_regs)); + of_iounmap(&op->resource[0], + up[0].port.membase, + sizeof(union sab82532_async_regs)); dev_set_drvdata(&op->dev, NULL); @@ -1143,6 +1119,7 @@ static int __init sunsab_init(void) sunsab_reg.minor = sunserial_current_minor; sunsab_reg.nr = num_channels; + sunsab_reg.cons = SUNSAB_CONSOLE(); err = uart_register_driver(&sunsab_reg); if (err) { -- cgit v1.2.3-70-g09d2 From 776a75fa5cfb8f3602d3ca9d221dc34497133f4b Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 14 Sep 2007 15:22:50 +1000 Subject: [XFS] Ensure file size updates have been completed before writing inode to disk. SGI-PV: 968767 SGI-Modid: xfs-linux-melb:xfs-kern:29675a Signed-off-by: Lachlan McIlroy Signed-off-by: David Chinner Signed-off-by: Tim Shimmin --- fs/xfs/linux-2.6/xfs_aops.c | 1 + fs/xfs/linux-2.6/xfs_super.c | 4 +++- fs/xfs/xfs_vnodeops.c | 20 ++++++++++++-------- 3 files changed, 16 insertions(+), 9 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c index d9c40fe6419..5f152f60d74 100644 --- a/fs/xfs/linux-2.6/xfs_aops.c +++ b/fs/xfs/linux-2.6/xfs_aops.c @@ -181,6 +181,7 @@ xfs_setfilesize( ip->i_d.di_size = isize; ip->i_update_core = 1; ip->i_update_size = 1; + mark_inode_dirty_sync(vn_to_inode(ioend->io_vnode)); } xfs_iunlock(ip, XFS_ILOCK_EXCL); diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 4528f9a3f30..491d1f4f202 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -415,8 +415,10 @@ xfs_fs_write_inode( if (vp) { vn_trace_entry(vp, __FUNCTION__, (inst_t *)__return_address); - if (sync) + if (sync) { + filemap_fdatawait(inode->i_mapping); flags |= FLUSH_SYNC; + } error = bhv_vop_iflush(vp, flags); if (error == EAGAIN) error = sync? bhv_vop_iflush(vp, flags | FLUSH_LOG) : 0; diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 1a5ad8cd97b..60345922990 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -1082,6 +1082,9 @@ xfs_fsync( if (XFS_FORCED_SHUTDOWN(ip->i_mount)) return XFS_ERROR(EIO); + if (flag & FSYNC_DATA) + filemap_fdatawait(vn_to_inode(XFS_ITOV(ip))->i_mapping); + /* * We always need to make sure that the required inode state * is safe on disk. The vnode might be clean but because @@ -3769,12 +3772,16 @@ xfs_inode_flush( sync_lsn = log->l_last_sync_lsn; GRANT_UNLOCK(log, s); - if ((XFS_LSN_CMP(iip->ili_last_lsn, sync_lsn) <= 0)) - return 0; + if ((XFS_LSN_CMP(iip->ili_last_lsn, sync_lsn) > 0)) { + if (flags & FLUSH_SYNC) + log_flags |= XFS_LOG_SYNC; + error = xfs_log_force(mp, iip->ili_last_lsn, log_flags); + if (error) + return error; + } - if (flags & FLUSH_SYNC) - log_flags |= XFS_LOG_SYNC; - return xfs_log_force(mp, iip->ili_last_lsn, log_flags); + if (ip->i_update_core == 0) + return 0; } } @@ -3788,9 +3795,6 @@ xfs_inode_flush( if (flags & FLUSH_INODE) { int flush_flags; - if (xfs_ipincount(ip)) - return EAGAIN; - if (flags & FLUSH_SYNC) { xfs_ilock(ip, XFS_ILOCK_SHARED); xfs_iflock(ip); -- cgit v1.2.3-70-g09d2 From b394e43e995d08821588a22561c6a71a63b4ff27 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 14 Sep 2007 15:23:04 +1000 Subject: [XFS] Avoid replaying inode buffer initialisation log items if on-disk version is newer. SGI-PV: 969656 SGI-Modid: xfs-linux-melb:xfs-kern:29676a Signed-off-by: Lachlan McIlroy Signed-off-by: David Chinner Signed-off-by: Tim Shimmin --- fs/xfs/xfs_buf_item.h | 5 +++++ fs/xfs/xfs_log_recover.c | 51 +++++++++++++++++++++++++++++++++++++++++++++--- fs/xfs/xfs_trans_buf.c | 1 + 3 files changed, 54 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_buf_item.h b/fs/xfs/xfs_buf_item.h index d7e13614306..fa25b7dcc6c 100644 --- a/fs/xfs/xfs_buf_item.h +++ b/fs/xfs/xfs_buf_item.h @@ -52,6 +52,11 @@ typedef struct xfs_buf_log_format_t { #define XFS_BLI_UDQUOT_BUF 0x4 #define XFS_BLI_PDQUOT_BUF 0x8 #define XFS_BLI_GDQUOT_BUF 0x10 +/* + * This flag indicates that the buffer contains newly allocated + * inodes. + */ +#define XFS_BLI_INODE_NEW_BUF 0x20 #define XFS_BLI_CHUNK 128 #define XFS_BLI_SHIFT 7 diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 8ae6e8e5f3d..dacb19739cc 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1874,6 +1874,7 @@ xlog_recover_do_inode_buffer( /*ARGSUSED*/ STATIC void xlog_recover_do_reg_buffer( + xfs_mount_t *mp, xlog_recover_item_t *item, xfs_buf_t *bp, xfs_buf_log_format_t *buf_f) @@ -1884,6 +1885,50 @@ xlog_recover_do_reg_buffer( unsigned int *data_map = NULL; unsigned int map_size = 0; int error; + int stale_buf = 1; + + /* + * Scan through the on-disk inode buffer and attempt to + * determine if it has been written to since it was logged. + * + * - If any of the magic numbers are incorrect then the buffer is stale + * - If any of the modes are non-zero then the buffer is not stale + * - If all of the modes are zero and at least one of the generation + * counts is non-zero then the buffer is stale + * + * If the end result is a stale buffer then the log buffer is replayed + * otherwise it is skipped. + * + * This heuristic is not perfect. It can be improved by scanning the + * entire inode chunk for evidence that any of the inode clusters have + * been updated. To fix this problem completely we will need a major + * architectural change to the logging system. + */ + if (buf_f->blf_flags & XFS_BLI_INODE_NEW_BUF) { + xfs_dinode_t *dip; + int inodes_per_buf; + int mode_count = 0; + int gen_count = 0; + + stale_buf = 0; + inodes_per_buf = XFS_BUF_COUNT(bp) >> mp->m_sb.sb_inodelog; + for (i = 0; i < inodes_per_buf; i++) { + dip = (xfs_dinode_t *)xfs_buf_offset(bp, + i * mp->m_sb.sb_inodesize); + if (be16_to_cpu(dip->di_core.di_magic) != + XFS_DINODE_MAGIC) { + stale_buf = 1; + break; + } + if (be16_to_cpu(dip->di_core.di_mode)) + mode_count++; + if (be16_to_cpu(dip->di_core.di_gen)) + gen_count++; + } + + if (!mode_count && gen_count) + stale_buf = 1; + } switch (buf_f->blf_type) { case XFS_LI_BUF: @@ -1917,7 +1962,7 @@ xlog_recover_do_reg_buffer( -1, 0, XFS_QMOPT_DOWARN, "dquot_buf_recover"); } - if (!error) + if (!error && stale_buf) memcpy(xfs_buf_offset(bp, (uint)bit << XFS_BLI_SHIFT), /* dest */ item->ri_buf[i].i_addr, /* source */ @@ -2089,7 +2134,7 @@ xlog_recover_do_dquot_buffer( if (log->l_quotaoffs_flag & type) return; - xlog_recover_do_reg_buffer(item, bp, buf_f); + xlog_recover_do_reg_buffer(mp, item, bp, buf_f); } /* @@ -2190,7 +2235,7 @@ xlog_recover_do_buffer_trans( (XFS_BLI_UDQUOT_BUF|XFS_BLI_PDQUOT_BUF|XFS_BLI_GDQUOT_BUF)) { xlog_recover_do_dquot_buffer(mp, log, item, bp, buf_f); } else { - xlog_recover_do_reg_buffer(item, bp, buf_f); + xlog_recover_do_reg_buffer(mp, item, bp, buf_f); } if (error) return XFS_ERROR(error); diff --git a/fs/xfs/xfs_trans_buf.c b/fs/xfs/xfs_trans_buf.c index 60b6b898022..95fff6872a2 100644 --- a/fs/xfs/xfs_trans_buf.c +++ b/fs/xfs/xfs_trans_buf.c @@ -966,6 +966,7 @@ xfs_trans_inode_alloc_buf( ASSERT(atomic_read(&bip->bli_refcount) > 0); bip->bli_flags |= XFS_BLI_INODE_ALLOC_BUF; + bip->bli_format.blf_flags |= XFS_BLI_INODE_NEW_BUF; } -- cgit v1.2.3-70-g09d2 From c0e7b4aa1c09ea992808ea8c079141bc8dd0f5bc Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 19 Sep 2007 14:38:12 +1000 Subject: [POWERPC] spusched: Fix null pointer dereference in find_victim find_victim can dereference a NULL pointer when iterating over the list of victim spus because list_mutex only guarantees spu->ct to be stable, but of course not to be non-NULL. Also fix find_victim to not call spu_unbind_context without list_mutex because that violates the above guarantee. Signed-off-by: Christoph Hellwig Signed-off-by: Arnd Bergmann Signed-off-by: Jeremy Kerr Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/sched.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index c784edd40ea..5bebe7fbe05 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -579,7 +579,7 @@ static struct spu *find_victim(struct spu_context *ctx) list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) { struct spu_context *tmp = spu->ctx; - if (tmp->prio > ctx->prio && + if (tmp && tmp->prio > ctx->prio && (!victim || tmp->prio > victim->prio)) victim = spu->ctx; } @@ -611,9 +611,9 @@ static struct spu *find_victim(struct spu_context *ctx) mutex_lock(&cbe_spu_info[node].list_mutex); cbe_spu_info[node].nr_active--; + spu_unbind_context(spu, victim); mutex_unlock(&cbe_spu_info[node].list_mutex); - spu_unbind_context(spu, victim); victim->stats.invol_ctx_switch++; spu->stats.invol_ctx_switch++; mutex_unlock(&victim->state_mutex); -- cgit v1.2.3-70-g09d2 From 7b5acbaac3f94ab810a977c0ec4e5fcabbf51bed Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 19 Sep 2007 14:21:56 +1000 Subject: [POWERPC] Don't expose clock vDSO functions when CPU has no timebase We forgot to remove the clock_gettime, clock_getres and get_tbfreq vDSO calls on CPUs that have no timebase such as 601 or 403 (old CPUs that have different mechanisms and for which the vDSO code will not work properly). This fixes it. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/vdso.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index cef01e4e898..213fa31ac53 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -98,6 +98,18 @@ static struct vdso_patch_def vdso_patches[] = { CPU_FTR_USE_TB, 0, "__kernel_gettimeofday", NULL }, + { + CPU_FTR_USE_TB, 0, + "__kernel_clock_gettime", NULL + }, + { + CPU_FTR_USE_TB, 0, + "__kernel_clock_getres", NULL + }, + { + CPU_FTR_USE_TB, 0, + "__kernel_get_tbfreq", NULL + }, }; /* -- cgit v1.2.3-70-g09d2 From c27da339698145a9383e052c1070a950d30da478 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 19 Sep 2007 14:21:56 +1000 Subject: [POWERPC] Fix timekeeping on PowerPC 601 Recent changes to the timekeeping code broke support for the PowerPC 601 processor which doesn't have the usual timebase facility but a slightly different thing called (yuck) the RTC. This fixes it, boot tested on an old 601 based PowerMac 7200. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/time.c | 8 +++++--- include/asm-powerpc/time.h | 5 +++++ 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 727a6699f2f..c627cf86d1e 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -239,7 +239,7 @@ static void snapshot_tb_and_purr(void *data) struct cpu_purr_data *p = &__get_cpu_var(cpu_purr_data); local_irq_save(flags); - p->tb = mftb(); + p->tb = get_tb_or_rtc(); p->purr = mfspr(SPRN_PURR); wmb(); p->initialized = 1; @@ -317,7 +317,7 @@ static void snapshot_purr(void) */ void snapshot_timebase(void) { - __get_cpu_var(last_jiffy) = get_tb(); + __get_cpu_var(last_jiffy) = get_tb_or_rtc(); snapshot_purr(); } @@ -684,6 +684,8 @@ void timer_interrupt(struct pt_regs * regs) write_seqlock(&xtime_lock); tb_next_jiffy = tb_last_jiffy + tb_ticks_per_jiffy; + if (__USE_RTC() && tb_next_jiffy >= 1000000000) + tb_next_jiffy -= 1000000000; if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) { tb_last_jiffy = tb_next_jiffy; do_timer(1); @@ -977,7 +979,7 @@ void __init time_init(void) tb_to_ns_scale = scale; tb_to_ns_shift = shift; /* Save the current timebase to pretty up CONFIG_PRINTK_TIME */ - boot_tb = get_tb(); + boot_tb = get_tb_or_rtc(); tm = get_boot_time(); diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h index d7f5ddfbaac..c104c15c662 100644 --- a/include/asm-powerpc/time.h +++ b/include/asm-powerpc/time.h @@ -149,6 +149,11 @@ static inline u64 get_tb(void) } #endif /* !CONFIG_PPC64 */ +static inline u64 get_tb_or_rtc(void) +{ + return __USE_RTC() ? get_rtc() : get_tb(); +} + static inline void set_tb(unsigned int upper, unsigned int lower) { mtspr(SPRN_TBWL, 0); -- cgit v1.2.3-70-g09d2 From 3558c9b3232b5f0fd9f32043a191eca20fca64c6 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 18 Sep 2007 22:46:19 -0700 Subject: Fix "Fix DAC960 driver on machines which don't support 64-bit DMA" sparc32: drivers/block/DAC960.c: In function 'DAC960_V1_EnableMemoryMailboxInterface': drivers/block/DAC960.c:1168: error: 'DMA_32BIT_MASK' undeclared (first use in this function) drivers/block/DAC960.c:1168: error: (Each undeclared identifier is reported only Cc: Cc: Cc: Alessandro Polverini Cc: Jeff Garzik Cc: Matthew Wilcox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/DAC960.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c index 504a95d888b..84d6aa500e2 100644 --- a/drivers/block/DAC960.c +++ b/drivers/block/DAC960.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 2c392a4f47f41b24432e6aa77bb5167d0bbb10c5 Mon Sep 17 00:00:00 2001 From: Nicolas George Date: Tue, 18 Sep 2007 22:46:21 -0700 Subject: uml: use correct type in BLKGETSIZE ioctl I found a type mismatch in UML that makes host block devices unusable as ubd devices on x86_64 and other 64 bits systems (segfault of the mm subsystem): In block/ioctl.c, the following lines show that the BLKGETSIZE ioctl expects a pointer to a long: case BLKGETSIZE: if ((bdev->bd_inode->i_size >> 9) > ~0UL) return -EFBIG; return put_ulong(arg, bdev->bd_inode->i_size >> 9); In arch/um/os-Linux/file.c, os_file_size calls it with an int. The ioctl_list man page should be fixed as well. Cc: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/os-Linux/file.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c index 6f92f732d25..c3ecc2a84e0 100644 --- a/arch/um/os-Linux/file.c +++ b/arch/um/os-Linux/file.c @@ -320,7 +320,8 @@ int os_file_size(char *file, unsigned long long *size_out) } if(S_ISBLK(buf.ust_mode)){ - int fd, blocks; + int fd; + long blocks; fd = os_open_file(file, of_read(OPENFLAGS()), 0); if(fd < 0){ -- cgit v1.2.3-70-g09d2 From 019ad4a0a60b09022945273848b5a686e39a78aa Mon Sep 17 00:00:00 2001 From: Nigel Cunningham Date: Tue, 18 Sep 2007 22:46:25 -0700 Subject: Fix failure to resume from initrds Commit 831441862956fffa17b9801db37e6ea1650b0f69 (Freezer: make kernel threads nonfreezable by default) breaks freezing when attempting to resume from an initrd, because the init (which is freezeable) spins while waiting for another thread to run /linuxrc, but doesn't check whether it has been told to enter the refrigerator. The original patch replaced a call to try_to_freeze() with a call to yield(). I believe a simple reversion is wrong because if !CONFIG_PM_SLEEP, try_to_freeze() is a noop. It should still yield. Signed-off-by: Nigel Cunningham Acked-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- init/do_mounts_initrd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/init/do_mounts_initrd.c b/init/do_mounts_initrd.c index a6b4c0c08e1..fd4fc12d262 100644 --- a/init/do_mounts_initrd.c +++ b/init/do_mounts_initrd.c @@ -57,8 +57,10 @@ static void __init handle_initrd(void) pid = kernel_thread(do_linuxrc, "/linuxrc", SIGCHLD); if (pid > 0) - while (pid != sys_wait4(-1, NULL, 0, NULL)) + while (pid != sys_wait4(-1, NULL, 0, NULL)) { + try_to_freeze(); yield(); + } /* move initrd to rootfs' /old */ sys_fchdir(old_fd); -- cgit v1.2.3-70-g09d2 From efc63c4fb0f95865907472d1c6bc0cfea9ee156b Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 18 Sep 2007 22:46:27 -0700 Subject: Fix UTS corruption during clone(CLONE_NEWUTS) struct utsname is copied from master one without any exclusion. Here is sample output from one proggie doing sethostname("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa"); sethostname("bbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"); and another clone(,, CLONE_NEWUTS, ...) uname() hostname = 'aaaaaaaaaaaaaaaaaaaaaaaaabbbbb' hostname = 'bbbaaaaaaaaaaaaaaaaaaaaaaaaaaa' hostname = 'aaaaaaaabbbbbbbbbbbbbbbbbbbbbb' hostname = 'aaaaaaaaaaaaaaaaaaaaaaaaaabbbb' hostname = 'aaaaaaaaaaaaaaaaaaaaaaaaaaaabb' hostname = 'aaabbbbbbbbbbbbbbbbbbbbbbbbbbb' hostname = 'bbbbbbbbbbbbbbbbaaaaaaaaaaaaaa' Hostname is sometimes corrupted. Yes, even _the_ simplest namespace activity had bug in it. :-( Signed-off-by: Alexey Dobriyan Acked-by: Serge Hallyn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/utsname.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/utsname.c b/kernel/utsname.c index 9d8180a0f0d..816d7b24fa0 100644 --- a/kernel/utsname.c +++ b/kernel/utsname.c @@ -28,7 +28,9 @@ static struct uts_namespace *clone_uts_ns(struct uts_namespace *old_ns) if (!ns) return ERR_PTR(-ENOMEM); + down_read(&uts_sem); memcpy(&ns->name, &old_ns->name, sizeof(ns->name)); + up_read(&uts_sem); kref_init(&ns->kref); return ns; } -- cgit v1.2.3-70-g09d2 From 2e3e31c05798786c131bf257f64848d4a9a894ab Mon Sep 17 00:00:00 2001 From: David Gibson Date: Tue, 18 Sep 2007 22:46:28 -0700 Subject: rtc-ds1742.c should use resource_size_t for base address Currently the rtc driver, rtc-ds1742.c uses an unsigned long to store the base mmio address of the NVRAM/RTC. This breaks on systems like PowerPC 440, which is a 32-bit core with 36-bit physical addresses: IO on the system, including the RTC, is typically above the 4GB point, and cannot fit into an unsigned long. This patch fixes the problem by replacing the unsigned long with a resource_size_t. Tested on Ebony (PPC440) (with additional patches to instantiate the ds1742 platform device appropriately). Signed-off-by: David Gibson Acked-by: Atsushi Nemoto Cc: Alessandro Zummo Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-ds1742.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-ds1742.c b/drivers/rtc/rtc-ds1742.c index b2e5481ba3b..67291b0f828 100644 --- a/drivers/rtc/rtc-ds1742.c +++ b/drivers/rtc/rtc-ds1742.c @@ -55,7 +55,7 @@ struct rtc_plat_data { void __iomem *ioaddr_rtc; size_t size_nvram; size_t size; - unsigned long baseaddr; + resource_size_t baseaddr; unsigned long last_jiffies; }; -- cgit v1.2.3-70-g09d2 From 49cc886aea1d79cdb0ea409554866238b07fe26f Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 18 Sep 2007 22:46:30 -0700 Subject: rtc: rtc-ds1553.c should use resource_size_t for base address Currently the rtc driver, rtc-ds1552.c uses an unsigned long to store the base mmio address of the NVRAM/RTC. This breaks on 32-bit systems with larger physical addresses. Signed-off-by: Atsushi Nemoto Cc: David Brownell Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-ds1553.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-ds1553.c b/drivers/rtc/rtc-ds1553.c index 46da5714932..5ab3492817d 100644 --- a/drivers/rtc/rtc-ds1553.c +++ b/drivers/rtc/rtc-ds1553.c @@ -61,7 +61,7 @@ struct rtc_plat_data { struct rtc_device *rtc; void __iomem *ioaddr; - unsigned long baseaddr; + resource_size_t baseaddr; unsigned long last_jiffies; int irq; unsigned int irqen; -- cgit v1.2.3-70-g09d2 From 4191ba26dae8338892e73f6e67bd18068b4344e9 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Tue, 18 Sep 2007 22:46:31 -0700 Subject: mspec: handle shrinking virtual memory areas The shrinking of a virtual memory area that is mmap(2)'d to a memory special file (device drivers/char/mspec.c) can cause a panic. If the mapped size of the vma (vm_area_struct) is very large, mspec allocates a large vma_data structure with vmalloc(). But such a vma can be shrunk by an munmap(2). The current driver uses the current size of each vma to deduce whether its vma_data structure was allocated by kmalloc() or vmalloc(). So if the vma was shrunk it appears to have been allocated by kmalloc(), and mspec attempts to free it with kfree(). This results in a panic. This patch avoids the panic (by preserving the type of the allocation) and also makes mspec work correctly as the vma is split into pieces by the munmap(2)'s. All vma's derived from such a split vma share the same vma_data structure that represents all the pages mapped into this set of vma's. The mpec driver must be made capable of using the right portion of the structure for each member vma. In other words, it must index into the array of page addresses using the portion of the array that represents the current vma. This is enabled by storing the vma group's vm_start in the vma_data structure. The shared vma_data's are not protected by mm->mmap_sem in the fork() case so the reference count is left as atomic_t. Signed-off-by: Cliff Wickman Acked-by: Jes Sorensen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/mspec.c | 69 ++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 48 insertions(+), 21 deletions(-) diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c index c08a4152ee8..049a46cc9f8 100644 --- a/drivers/char/mspec.c +++ b/drivers/char/mspec.c @@ -67,7 +67,7 @@ /* * Page types allocated by the device. */ -enum { +enum mspec_page_type { MSPEC_FETCHOP = 1, MSPEC_CACHED, MSPEC_UNCACHED @@ -83,15 +83,25 @@ static int is_sn2; * One of these structures is allocated when an mspec region is mmaped. The * structure is pointed to by the vma->vm_private_data field in the vma struct. * This structure is used to record the addresses of the mspec pages. + * This structure is shared by all vma's that are split off from the + * original vma when split_vma()'s are done. + * + * The refcnt is incremented atomically because mm->mmap_sem does not + * protect in fork case where multiple tasks share the vma_data. */ struct vma_data { atomic_t refcnt; /* Number of vmas sharing the data. */ - spinlock_t lock; /* Serialize access to the vma. */ + spinlock_t lock; /* Serialize access to this structure. */ int count; /* Number of pages allocated. */ - int type; /* Type of pages allocated. */ + enum mspec_page_type type; /* Type of pages allocated. */ + int flags; /* See VMD_xxx below. */ + unsigned long vm_start; /* Original (unsplit) base. */ + unsigned long vm_end; /* Original (unsplit) end. */ unsigned long maddr[0]; /* Array of MSPEC addresses. */ }; +#define VMD_VMALLOCED 0x1 /* vmalloc'd rather than kmalloc'd */ + /* used on shub2 to clear FOP cache in the HUB */ static unsigned long scratch_page[MAX_NUMNODES]; #define SH2_AMO_CACHE_ENTRIES 4 @@ -129,8 +139,8 @@ mspec_zero_block(unsigned long addr, int len) * mspec_open * * Called when a device mapping is created by a means other than mmap - * (via fork, etc.). Increments the reference count on the underlying - * mspec data so it is not freed prematurely. + * (via fork, munmap, etc.). Increments the reference count on the + * underlying mspec data so it is not freed prematurely. */ static void mspec_open(struct vm_area_struct *vma) @@ -151,34 +161,44 @@ static void mspec_close(struct vm_area_struct *vma) { struct vma_data *vdata; - int i, pages, result, vdata_size; + int index, last_index, result; + unsigned long my_page; vdata = vma->vm_private_data; - if (!atomic_dec_and_test(&vdata->refcnt)) - return; - pages = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; - vdata_size = sizeof(struct vma_data) + pages * sizeof(long); - for (i = 0; i < pages; i++) { - if (vdata->maddr[i] == 0) + BUG_ON(vma->vm_start < vdata->vm_start || vma->vm_end > vdata->vm_end); + + spin_lock(&vdata->lock); + index = (vma->vm_start - vdata->vm_start) >> PAGE_SHIFT; + last_index = (vma->vm_end - vdata->vm_start) >> PAGE_SHIFT; + for (; index < last_index; index++) { + if (vdata->maddr[index] == 0) continue; /* * Clear the page before sticking it back * into the pool. */ - result = mspec_zero_block(vdata->maddr[i], PAGE_SIZE); + my_page = vdata->maddr[index]; + vdata->maddr[index] = 0; + spin_unlock(&vdata->lock); + result = mspec_zero_block(my_page, PAGE_SIZE); if (!result) - uncached_free_page(vdata->maddr[i]); + uncached_free_page(my_page); else printk(KERN_WARNING "mspec_close(): " "failed to zero page %i\n", result); + spin_lock(&vdata->lock); } + spin_unlock(&vdata->lock); - if (vdata_size <= PAGE_SIZE) - kfree(vdata); - else + if (!atomic_dec_and_test(&vdata->refcnt)) + return; + + if (vdata->flags & VMD_VMALLOCED) vfree(vdata); + else + kfree(vdata); } @@ -195,7 +215,8 @@ mspec_nopfn(struct vm_area_struct *vma, unsigned long address) int index; struct vma_data *vdata = vma->vm_private_data; - index = (address - vma->vm_start) >> PAGE_SHIFT; + BUG_ON(address < vdata->vm_start || address >= vdata->vm_end); + index = (address - vdata->vm_start) >> PAGE_SHIFT; maddr = (volatile unsigned long) vdata->maddr[index]; if (maddr == 0) { maddr = uncached_alloc_page(numa_node_id()); @@ -237,10 +258,11 @@ static struct vm_operations_struct mspec_vm_ops = { * underlying pages. */ static int -mspec_mmap(struct file *file, struct vm_area_struct *vma, int type) +mspec_mmap(struct file *file, struct vm_area_struct *vma, + enum mspec_page_type type) { struct vma_data *vdata; - int pages, vdata_size; + int pages, vdata_size, flags = 0; if (vma->vm_pgoff != 0) return -EINVAL; @@ -255,12 +277,17 @@ mspec_mmap(struct file *file, struct vm_area_struct *vma, int type) vdata_size = sizeof(struct vma_data) + pages * sizeof(long); if (vdata_size <= PAGE_SIZE) vdata = kmalloc(vdata_size, GFP_KERNEL); - else + else { vdata = vmalloc(vdata_size); + flags = VMD_VMALLOCED; + } if (!vdata) return -ENOMEM; memset(vdata, 0, vdata_size); + vdata->vm_start = vma->vm_start; + vdata->vm_end = vma->vm_end; + vdata->flags = flags; vdata->type = type; spin_lock_init(&vdata->lock); vdata->refcnt = ATOMIC_INIT(1); -- cgit v1.2.3-70-g09d2 From 248bdd5efca5a113cbf443a993c69e53d370236b Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 18 Sep 2007 22:46:32 -0700 Subject: pci: fix unterminated pci_device_id lists Fix a couple drivers that do not correctly terminate their pci_device_id lists. This results in garbage being spewed into modules.pcimap when the module happens to not have 28 NULL bytes following the table, and/or the last PCI ID is actually truncated from the table when calculating the modules.alias PCI aliases, cause those unfortunate device IDs to not auto-load. Signed-off-by: Kees Cook Acked-by: Corey Minyard Cc: David Woodhouse Acked-by: Jeff Garzik Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_si_intf.c | 3 ++- drivers/media/video/usbvision/usbvision-cards.c | 1 + drivers/mtd/nand/cafe_nand.c | 3 ++- 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 9b07f785106..dd441ff4af5 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2215,7 +2215,8 @@ static int ipmi_pci_resume(struct pci_dev *pdev) static struct pci_device_id ipmi_pci_devices[] = { { PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) }, - { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) } + { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) }, + { 0, } }; MODULE_DEVICE_TABLE(pci, ipmi_pci_devices); diff --git a/drivers/media/video/usbvision/usbvision-cards.c b/drivers/media/video/usbvision/usbvision-cards.c index 380564cd331..f09eb102731 100644 --- a/drivers/media/video/usbvision/usbvision-cards.c +++ b/drivers/media/video/usbvision/usbvision-cards.c @@ -1081,6 +1081,7 @@ struct usb_device_id usbvision_table [] = { { USB_DEVICE(0x2304, 0x0301), .driver_info=PINNA_LINX_VD_IN_CAB_PAL }, { USB_DEVICE(0x2304, 0x0419), .driver_info=PINNA_PCTV_BUNGEE_PAL_FM }, { USB_DEVICE(0x2400, 0x4200), .driver_info=HPG_WINTV }, + { }, /* terminate list */ }; MODULE_DEVICE_TABLE (usb, usbvision_table); diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index cff969d05d4..6f32a35eb10 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -816,7 +816,8 @@ static void __devexit cafe_nand_remove(struct pci_dev *pdev) } static struct pci_device_id cafe_nand_tbl[] = { - { 0x11ab, 0x4100, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MEMORY_FLASH << 8, 0xFFFF0 } + { 0x11ab, 0x4100, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MEMORY_FLASH << 8, 0xFFFF0 }, + { 0, } }; MODULE_DEVICE_TABLE(pci, cafe_nand_tbl); -- cgit v1.2.3-70-g09d2 From 389a3c02496dd1b399bb0efd005e9fa2be24e9ee Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 18 Sep 2007 22:46:33 -0700 Subject: xen: don't bother trying to set cr4 Xen ignores all updates to cr4, and some versions will kill the domain if you try to change its value. Just ignore all changes. Signed-off-by: Jeremy Fitzhardinge Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/xen/enlighten.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/i386/xen/enlighten.c b/arch/i386/xen/enlighten.c index f0c37511d8d..f01bfcd4bde 100644 --- a/arch/i386/xen/enlighten.c +++ b/arch/i386/xen/enlighten.c @@ -623,8 +623,8 @@ static unsigned long xen_read_cr2_direct(void) static void xen_write_cr4(unsigned long cr4) { - /* never allow TSC to be disabled */ - native_write_cr4(cr4 & ~X86_CR4_TSD); + /* Just ignore cr4 changes; Xen doesn't allow us to do + anything anyway. */ } static unsigned long xen_read_cr3(void) -- cgit v1.2.3-70-g09d2 From 8c8bd037e5bd7bbc3c82b74cbed4da1ddc3fe8de Mon Sep 17 00:00:00 2001 From: "Antonino A. Daplas" Date: Tue, 18 Sep 2007 22:46:34 -0700 Subject: intelfb: Fix bug in DPLL disable Reported in Kernel Bugzilla 9006 Fix an obvious bug in DPLL disable. Signed-off-by: Antonino Daplas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/intelfb/intelfbhw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/intelfb/intelfbhw.c b/drivers/video/intelfb/intelfbhw.c index b21d0dec928..6a47682d861 100644 --- a/drivers/video/intelfb/intelfbhw.c +++ b/drivers/video/intelfb/intelfbhw.c @@ -1352,7 +1352,7 @@ intelfbhw_program_mode(struct intelfb_info *dinfo, /* turn off PLL */ tmp = INREG(dpll_reg); - dpll_reg &= ~DPLL_VCO_ENABLE; + tmp &= ~DPLL_VCO_ENABLE; OUTREG(dpll_reg, tmp); /* Set PLL parameters */ -- cgit v1.2.3-70-g09d2 From e67aa27a6179c287983c6c525beb5320f5cd1672 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 18 Sep 2007 22:46:35 -0700 Subject: intel-agp: Fix i830 mask variable that changed with G33 support The mask on i830 should be 0x70 always, later chips 0xF0 should be okay. Signed-off-by: Dave Airlie Acked-by: Zhenyu Wang Cc: Michael Haas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/agp/agp.h | 3 ++- drivers/char/agp/intel-agp.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h index 35ab1a9f8e8..8955e7ff759 100644 --- a/drivers/char/agp/agp.h +++ b/drivers/char/agp/agp.h @@ -176,7 +176,7 @@ struct agp_bridge_data { #define I830_GMCH_MEM_MASK 0x1 #define I830_GMCH_MEM_64M 0x1 #define I830_GMCH_MEM_128M 0 -#define I830_GMCH_GMS_MASK 0xF0 +#define I830_GMCH_GMS_MASK 0x70 #define I830_GMCH_GMS_DISABLED 0x00 #define I830_GMCH_GMS_LOCAL 0x10 #define I830_GMCH_GMS_STOLEN_512 0x20 @@ -190,6 +190,7 @@ struct agp_bridge_data { #define INTEL_I830_ERRSTS 0x92 /* Intel 855GM/852GM registers */ +#define I855_GMCH_GMS_MASK 0xF0 #define I855_GMCH_GMS_STOLEN_0M 0x0 #define I855_GMCH_GMS_STOLEN_1M (0x1 << 4) #define I855_GMCH_GMS_STOLEN_4M (0x2 << 4) diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 7c69bf259ca..a5d0e95a227 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -511,7 +511,7 @@ static void intel_i830_init_gtt_entries(void) */ if (IS_G33) size = 0; - switch (gmch_ctrl & I830_GMCH_GMS_MASK) { + switch (gmch_ctrl & I855_GMCH_GMS_MASK) { case I855_GMCH_GMS_STOLEN_1M: gtt_entries = MB(1) - KB(size); break; -- cgit v1.2.3-70-g09d2 From 3d82abae9523c33d4a16fdfdfd2bdde316d7b56a Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Tue, 18 Sep 2007 22:46:38 -0700 Subject: dir_index: error out instead of BUG on corrupt dx dirs Convert asserts (BUGs) in dx_probe from bad on-disk data to recoverable errors with helpful warnings. With help catching other asserts from Duane Griffin Signed-off-by: Eric Sandeen Acked-by: Duane Griffin Acked-by: Theodore Ts'o Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ext3/namei.c | 34 ++++++++++++++++++++++++++++++---- fs/ext4/namei.c | 34 ++++++++++++++++++++++++++++++---- 2 files changed, 60 insertions(+), 8 deletions(-) diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 1586807b817..9d4a89820e1 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -379,13 +379,28 @@ dx_probe(struct dentry *dentry, struct inode *dir, entries = (struct dx_entry *) (((char *)&root->info) + root->info.info_length); - assert(dx_get_limit(entries) == dx_root_limit(dir, - root->info.info_length)); + + if (dx_get_limit(entries) != dx_root_limit(dir, + root->info.info_length)) { + ext3_warning(dir->i_sb, __FUNCTION__, + "dx entry: limit != root limit"); + brelse(bh); + *err = ERR_BAD_DX_DIR; + goto fail; + } + dxtrace (printk("Look up %x", hash)); while (1) { count = dx_get_count(entries); - assert (count && count <= dx_get_limit(entries)); + if (!count || count > dx_get_limit(entries)) { + ext3_warning(dir->i_sb, __FUNCTION__, + "dx entry: no count or count > limit"); + brelse(bh); + *err = ERR_BAD_DX_DIR; + goto fail2; + } + p = entries + 1; q = entries + count - 1; while (p <= q) @@ -423,8 +438,15 @@ dx_probe(struct dentry *dentry, struct inode *dir, if (!(bh = ext3_bread (NULL,dir, dx_get_block(at), 0, err))) goto fail2; at = entries = ((struct dx_node *) bh->b_data)->entries; - assert (dx_get_limit(entries) == dx_node_limit (dir)); + if (dx_get_limit(entries) != dx_node_limit (dir)) { + ext3_warning(dir->i_sb, __FUNCTION__, + "dx entry: limit != node limit"); + brelse(bh); + *err = ERR_BAD_DX_DIR; + goto fail2; + } frame++; + frame->bh = NULL; } fail2: while (frame >= frame_in) { @@ -432,6 +454,10 @@ fail2: frame--; } fail: + if (*err == ERR_BAD_DX_DIR) + ext3_warning(dir->i_sb, __FUNCTION__, + "Corrupt dir inode %ld, running e2fsck is " + "recommended.", dir->i_ino); return NULL; } diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index da224974af7..9468289637a 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -379,13 +379,28 @@ dx_probe(struct dentry *dentry, struct inode *dir, entries = (struct dx_entry *) (((char *)&root->info) + root->info.info_length); - assert(dx_get_limit(entries) == dx_root_limit(dir, - root->info.info_length)); + + if (dx_get_limit(entries) != dx_root_limit(dir, + root->info.info_length)) { + ext4_warning(dir->i_sb, __FUNCTION__, + "dx entry: limit != root limit"); + brelse(bh); + *err = ERR_BAD_DX_DIR; + goto fail; + } + dxtrace (printk("Look up %x", hash)); while (1) { count = dx_get_count(entries); - assert (count && count <= dx_get_limit(entries)); + if (!count || count > dx_get_limit(entries)) { + ext4_warning(dir->i_sb, __FUNCTION__, + "dx entry: no count or count > limit"); + brelse(bh); + *err = ERR_BAD_DX_DIR; + goto fail2; + } + p = entries + 1; q = entries + count - 1; while (p <= q) @@ -423,8 +438,15 @@ dx_probe(struct dentry *dentry, struct inode *dir, if (!(bh = ext4_bread (NULL,dir, dx_get_block(at), 0, err))) goto fail2; at = entries = ((struct dx_node *) bh->b_data)->entries; - assert (dx_get_limit(entries) == dx_node_limit (dir)); + if (dx_get_limit(entries) != dx_node_limit (dir)) { + ext4_warning(dir->i_sb, __FUNCTION__, + "dx entry: limit != node limit"); + brelse(bh); + *err = ERR_BAD_DX_DIR; + goto fail2; + } frame++; + frame->bh = NULL; } fail2: while (frame >= frame_in) { @@ -432,6 +454,10 @@ fail2: frame--; } fail: + if (*err == ERR_BAD_DX_DIR) + ext4_warning(dir->i_sb, __FUNCTION__, + "Corrupt dir inode %ld, running e2fsck is " + "recommended.", dir->i_ino); return NULL; } -- cgit v1.2.3-70-g09d2 From 49af7ee181f4f516ac99eba85d3f70ed42cabe76 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 18 Sep 2007 22:46:40 -0700 Subject: nfs: fix oops re sysctls and V4 support NFS unregisters sysctls only if V4 support is compiled in. However, sysctl table is not V4 specific, so unregister it always. Steps to reproduce: [build nfs.ko with CONFIG_NFS_V4=n] modrobe nfs rmmod nfs ls /proc/sys Unable to handle kernel paging request at ffffffff880661c0 RIP: [] proc_sys_readdir+0xd3/0x350 PGD 203067 PUD 207063 PMD 7e216067 PTE 0 Oops: 0000 [1] SMP CPU 1 Modules linked in: lockd nfs_acl sunrpc Pid: 3335, comm: ls Not tainted 2.6.23-rc3-bloat #2 RIP: 0010:[] [] proc_sys_readdir+0xd3/0x350 RSP: 0018:ffff81007fd93e78 EFLAGS: 00010286 RAX: ffffffff880661c0 RBX: ffffffff80466370 RCX: ffffffff880661c0 RDX: 00000000000014c0 RSI: ffff81007f3ad020 RDI: ffff81007efd8b40 RBP: 0000000000000018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: ffffffff802a8570 R12: ffffffff880661c0 R13: ffff81007e219640 R14: ffff81007efd8b40 R15: ffff81007ded7280 FS: 00002ba25ef03060(0000) GS:ffff81007ff81258(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffffff880661c0 CR3: 000000007dfaf000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ls (pid: 3335, threadinfo ffff81007fd92000, task ffff81007d8a0000) Stack: ffff81007f3ad150 ffffffff80283f30 ffff81007fd93f48 ffff81007efd8b40 ffff81007ee00440 0000000422222222 0000000200035593 ffffffff88037e9a 2222222222222222 ffffffff80466500 ffff81007e416400 ffff81007e219640 Call Trace: [] filldir+0x0/0xf0 [] filldir+0x0/0xf0 [] vfs_readdir+0xa7/0xc0 [] sys_getdents+0x96/0xe0 [] system_call+0x7e/0x83 Code: 41 8b 14 24 85 d2 74 dc 49 8b 44 24 08 48 85 c0 74 e7 49 3b RIP [] proc_sys_readdir+0xd3/0x350 RSP CR2: ffffffff880661c0 Kernel panic - not syncing: Fatal exception Signed-off-by: Alexey Dobriyan Acked-by: Trond Myklebust Cc: "J. Bruce Fields" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/nfs/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 8ed593766f1..b878528b64c 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -345,8 +345,8 @@ void __exit unregister_nfs_fs(void) unregister_shrinker(&acl_shrinker); #ifdef CONFIG_NFS_V4 unregister_filesystem(&nfs4_fs_type); - nfs_unregister_sysctl(); #endif + nfs_unregister_sysctl(); unregister_filesystem(&nfs_fs_type); } -- cgit v1.2.3-70-g09d2 From e42601973b1bce1d2987f82159c1ebeaccc6b310 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 18 Sep 2007 22:46:41 -0700 Subject: disable sys_timerfd() for 2.6.23 There is still some confusion and disagreement over what this interface should actually do. So it is best that we disable it in 2.6.23 until we get that fully sorted out. (sys_timerfd() was present in 2.6.22 but it was apparently broken, so here we assume that nobody is using it yet). Cc: Michael Kerrisk Cc: Davide Libenzi Acked-by: Linus Torvalds Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- init/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/init/Kconfig b/init/Kconfig index 96b54595f1d..d54d0cadcc0 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -488,6 +488,7 @@ config SIGNALFD config TIMERFD bool "Enable timerfd() system call" if EMBEDDED select ANON_INODES + depends on BROKEN default y help Enable the timerfd() system call that allows to receive timer -- cgit v1.2.3-70-g09d2 From ef2b02d3e617cb0400eedf2668f86215e1b0e6af Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Tue, 18 Sep 2007 22:46:42 -0700 Subject: ext34: ensure do_split leaves enough free space in both blocks The do_split() function for htree dir blocks is intended to split a leaf block to make room for a new entry. It sorts the entries in the original block by hash value, then moves the last half of the entries to the new block - without accounting for how much space this actually moves. (IOW, it moves half of the entry *count* not half of the entry *space*). If by chance we have both large & small entries, and we move only the smallest entries, and we have a large new entry to insert, we may not have created enough space for it. The patch below stores each record size when calculating the dx_map, and then walks the hash-sorted dx_map, calculating how many entries must be moved to more evenly split the existing entries between the old block and the new block, guaranteeing enough space for the new entry. The dx_map "offs" member is reduced to u16 so that the overall map size does not change - it is temporarily stored at the end of the new block, and if it grows too large it may be overwritten. By making offs and size both u16, we won't grow the map size. Also add a few comments to the functions involved. This fixes the testcase reported by hooanon05@yahoo.co.jp on the linux-ext4 list, "ext3 dir_index causes an error" Thanks to Andreas Dilger for discussing the problem & solution with me. Signed-off-by: Eric Sandeen Signed-off-by: Andreas Dilger Tested-by: Junjiro Okajima Cc: Theodore Ts'o Cc: Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ext3/namei.c | 39 +++++++++++++++++++++++++++++++++++---- fs/ext4/namei.c | 39 +++++++++++++++++++++++++++++++++++---- 2 files changed, 70 insertions(+), 8 deletions(-) diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 9d4a89820e1..c1fa1908dba 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -140,7 +140,8 @@ struct dx_frame struct dx_map_entry { u32 hash; - u32 offs; + u16 offs; + u16 size; }; #ifdef CONFIG_EXT3_INDEX @@ -697,6 +698,10 @@ errout: * Directory block splitting, compacting */ +/* + * Create map of hash values, offsets, and sizes, stored at end of block. + * Returns number of entries mapped. + */ static int dx_make_map (struct ext3_dir_entry_2 *de, int size, struct dx_hash_info *hinfo, struct dx_map_entry *map_tail) { @@ -710,7 +715,8 @@ static int dx_make_map (struct ext3_dir_entry_2 *de, int size, ext3fs_dirhash(de->name, de->name_len, &h); map_tail--; map_tail->hash = h.hash; - map_tail->offs = (u32) ((char *) de - base); + map_tail->offs = (u16) ((char *) de - base); + map_tail->size = le16_to_cpu(de->rec_len); count++; cond_resched(); } @@ -720,6 +726,7 @@ static int dx_make_map (struct ext3_dir_entry_2 *de, int size, return count; } +/* Sort map by hash value */ static void dx_sort_map (struct dx_map_entry *map, unsigned count) { struct dx_map_entry *p, *q, *top = map + count - 1; @@ -1117,6 +1124,10 @@ static inline void ext3_set_de_type(struct super_block *sb, } #ifdef CONFIG_EXT3_INDEX +/* + * Move count entries from end of map between two memory locations. + * Returns pointer to last entry moved. + */ static struct ext3_dir_entry_2 * dx_move_dirents(char *from, char *to, struct dx_map_entry *map, int count) { @@ -1135,6 +1146,10 @@ dx_move_dirents(char *from, char *to, struct dx_map_entry *map, int count) return (struct ext3_dir_entry_2 *) (to - rec_len); } +/* + * Compact each dir entry in the range to the minimal rec_len. + * Returns pointer to last entry in range. + */ static struct ext3_dir_entry_2* dx_pack_dirents(char *base, int size) { struct ext3_dir_entry_2 *next, *to, *prev, *de = (struct ext3_dir_entry_2 *) base; @@ -1157,6 +1172,11 @@ static struct ext3_dir_entry_2* dx_pack_dirents(char *base, int size) return prev; } +/* + * Split a full leaf block to make room for a new dir entry. + * Allocate a new block, and move entries so that they are approx. equally full. + * Returns pointer to de in block into which the new entry will be inserted. + */ static struct ext3_dir_entry_2 *do_split(handle_t *handle, struct inode *dir, struct buffer_head **bh,struct dx_frame *frame, struct dx_hash_info *hinfo, int *error) @@ -1168,7 +1188,7 @@ static struct ext3_dir_entry_2 *do_split(handle_t *handle, struct inode *dir, u32 hash2; struct dx_map_entry *map; char *data1 = (*bh)->b_data, *data2; - unsigned split; + unsigned split, move, size, i; struct ext3_dir_entry_2 *de = NULL, *de2; int err = 0; @@ -1196,8 +1216,19 @@ static struct ext3_dir_entry_2 *do_split(handle_t *handle, struct inode *dir, count = dx_make_map ((struct ext3_dir_entry_2 *) data1, blocksize, hinfo, map); map -= count; - split = count/2; // need to adjust to actual middle dx_sort_map (map, count); + /* Split the existing block in the middle, size-wise */ + size = 0; + move = 0; + for (i = count-1; i >= 0; i--) { + /* is more than half of this entry in 2nd half of the block? */ + if (size + map[i].size/2 > blocksize/2) + break; + size += map[i].size; + move++; + } + /* map index at which we will split */ + split = count - move; hash2 = map[split].hash; continued = hash2 == map[split - 1].hash; dxtrace(printk("Split block %i at %x, %i/%i\n", diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 9468289637a..5fdb862e71c 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -140,7 +140,8 @@ struct dx_frame struct dx_map_entry { u32 hash; - u32 offs; + u16 offs; + u16 size; }; #ifdef CONFIG_EXT4_INDEX @@ -697,6 +698,10 @@ errout: * Directory block splitting, compacting */ +/* + * Create map of hash values, offsets, and sizes, stored at end of block. + * Returns number of entries mapped. + */ static int dx_make_map (struct ext4_dir_entry_2 *de, int size, struct dx_hash_info *hinfo, struct dx_map_entry *map_tail) { @@ -710,7 +715,8 @@ static int dx_make_map (struct ext4_dir_entry_2 *de, int size, ext4fs_dirhash(de->name, de->name_len, &h); map_tail--; map_tail->hash = h.hash; - map_tail->offs = (u32) ((char *) de - base); + map_tail->offs = (u16) ((char *) de - base); + map_tail->size = le16_to_cpu(de->rec_len); count++; cond_resched(); } @@ -720,6 +726,7 @@ static int dx_make_map (struct ext4_dir_entry_2 *de, int size, return count; } +/* Sort map by hash value */ static void dx_sort_map (struct dx_map_entry *map, unsigned count) { struct dx_map_entry *p, *q, *top = map + count - 1; @@ -1115,6 +1122,10 @@ static inline void ext4_set_de_type(struct super_block *sb, } #ifdef CONFIG_EXT4_INDEX +/* + * Move count entries from end of map between two memory locations. + * Returns pointer to last entry moved. + */ static struct ext4_dir_entry_2 * dx_move_dirents(char *from, char *to, struct dx_map_entry *map, int count) { @@ -1133,6 +1144,10 @@ dx_move_dirents(char *from, char *to, struct dx_map_entry *map, int count) return (struct ext4_dir_entry_2 *) (to - rec_len); } +/* + * Compact each dir entry in the range to the minimal rec_len. + * Returns pointer to last entry in range. + */ static struct ext4_dir_entry_2* dx_pack_dirents(char *base, int size) { struct ext4_dir_entry_2 *next, *to, *prev, *de = (struct ext4_dir_entry_2 *) base; @@ -1155,6 +1170,11 @@ static struct ext4_dir_entry_2* dx_pack_dirents(char *base, int size) return prev; } +/* + * Split a full leaf block to make room for a new dir entry. + * Allocate a new block, and move entries so that they are approx. equally full. + * Returns pointer to de in block into which the new entry will be inserted. + */ static struct ext4_dir_entry_2 *do_split(handle_t *handle, struct inode *dir, struct buffer_head **bh,struct dx_frame *frame, struct dx_hash_info *hinfo, int *error) @@ -1166,7 +1186,7 @@ static struct ext4_dir_entry_2 *do_split(handle_t *handle, struct inode *dir, u32 hash2; struct dx_map_entry *map; char *data1 = (*bh)->b_data, *data2; - unsigned split; + unsigned split, move, size, i; struct ext4_dir_entry_2 *de = NULL, *de2; int err = 0; @@ -1194,8 +1214,19 @@ static struct ext4_dir_entry_2 *do_split(handle_t *handle, struct inode *dir, count = dx_make_map ((struct ext4_dir_entry_2 *) data1, blocksize, hinfo, map); map -= count; - split = count/2; // need to adjust to actual middle dx_sort_map (map, count); + /* Split the existing block in the middle, size-wise */ + size = 0; + move = 0; + for (i = count-1; i >= 0; i--) { + /* is more than half of this entry in 2nd half of the block? */ + if (size + map[i].size/2 > blocksize/2) + break; + size += map[i].size; + move++; + } + /* map index at which we will split */ + split = count - move; hash2 = map[split].hash; continued = hash2 == map[split - 1].hash; dxtrace(printk("Split block %i at %x, %i/%i\n", -- cgit v1.2.3-70-g09d2 From d8a4821dca693867a7953104c1e3cc830eb9191f Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Tue, 18 Sep 2007 22:46:43 -0700 Subject: kernel/user.c: Use list_for_each_entry instead of list_for_each kernel/user.c: Convert list_for_each to list_for_each_entry in uid_hash_find() Signed-off-by: Matthias Kaehlcke Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/user.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/kernel/user.c b/kernel/user.c index e7d11cef699..e080ba863ae 100644 --- a/kernel/user.c +++ b/kernel/user.c @@ -67,13 +67,9 @@ static inline void uid_hash_remove(struct user_struct *up) static inline struct user_struct *uid_hash_find(uid_t uid, struct list_head *hashent) { - struct list_head *up; - - list_for_each(up, hashent) { - struct user_struct *user; - - user = list_entry(up, struct user_struct, uidhash_list); + struct user_struct *user; + list_for_each_entry(user, hashent, uidhash_list) { if(user->uid == uid) { atomic_inc(&user->__count); return user; -- cgit v1.2.3-70-g09d2 From 735de2230f09741077a645a913de0a04b10208bf Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Tue, 18 Sep 2007 22:46:44 -0700 Subject: Convert uid hash to hlist Surprisingly, but (spotted by Alexey Dobriyan) the uid hash still uses list_heads, thus occupying twice as much place as it could. Convert it to hlist_heads. Signed-off-by: Pavel Emelyanov Signed-off-by: Alexey Dobriyan Acked-by: Serge Hallyn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 2 +- include/linux/user_namespace.h | 2 +- kernel/user.c | 15 ++++++++------- kernel/user_namespace.c | 2 +- 4 files changed, 11 insertions(+), 10 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index f4e324ed2e4..6239bc2c2ba 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -593,7 +593,7 @@ struct user_struct { #endif /* Hash table maintenance information */ - struct list_head uidhash_list; + struct hlist_node uidhash_node; uid_t uid; }; diff --git a/include/linux/user_namespace.h b/include/linux/user_namespace.h index 1101b0ce878..b5f41d4c2ee 100644 --- a/include/linux/user_namespace.h +++ b/include/linux/user_namespace.h @@ -11,7 +11,7 @@ struct user_namespace { struct kref kref; - struct list_head uidhash_table[UIDHASH_SZ]; + struct hlist_head uidhash_table[UIDHASH_SZ]; struct user_struct *root_user; }; diff --git a/kernel/user.c b/kernel/user.c index e080ba863ae..add57c7e4c0 100644 --- a/kernel/user.c +++ b/kernel/user.c @@ -55,21 +55,22 @@ struct user_struct root_user = { /* * These routines must be called with the uidhash spinlock held! */ -static inline void uid_hash_insert(struct user_struct *up, struct list_head *hashent) +static inline void uid_hash_insert(struct user_struct *up, struct hlist_head *hashent) { - list_add(&up->uidhash_list, hashent); + hlist_add_head(&up->uidhash_node, hashent); } static inline void uid_hash_remove(struct user_struct *up) { - list_del(&up->uidhash_list); + hlist_del(&up->uidhash_node); } -static inline struct user_struct *uid_hash_find(uid_t uid, struct list_head *hashent) +static inline struct user_struct *uid_hash_find(uid_t uid, struct hlist_head *hashent) { struct user_struct *user; + struct hlist_node *h; - list_for_each_entry(user, hashent, uidhash_list) { + hlist_for_each_entry(user, h, hashent, uidhash_node) { if(user->uid == uid) { atomic_inc(&user->__count); return user; @@ -118,7 +119,7 @@ void free_uid(struct user_struct *up) struct user_struct * alloc_uid(struct user_namespace *ns, uid_t uid) { - struct list_head *hashent = uidhashentry(ns, uid); + struct hlist_head *hashent = uidhashentry(ns, uid); struct user_struct *up; spin_lock_irq(&uidhash_lock); @@ -207,7 +208,7 @@ static int __init uid_cache_init(void) 0, SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL); for(n = 0; n < UIDHASH_SZ; ++n) - INIT_LIST_HEAD(init_user_ns.uidhash_table + n); + INIT_HLIST_HEAD(init_user_ns.uidhash_table + n); /* Insert the root user immediately (init already runs as root) */ spin_lock_irq(&uidhash_lock); diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c index 85af9422ea6..e7ba1bf8457 100644 --- a/kernel/user_namespace.c +++ b/kernel/user_namespace.c @@ -39,7 +39,7 @@ static struct user_namespace *clone_user_ns(struct user_namespace *old_ns) kref_init(&ns->kref); for (n = 0; n < UIDHASH_SZ; ++n) - INIT_LIST_HEAD(ns->uidhash_table + n); + INIT_HLIST_HEAD(ns->uidhash_table + n); /* Insert new root user. */ ns->root_user = alloc_uid(ns, 0); -- cgit v1.2.3-70-g09d2 From 28f300d23674fa01ae747c66ce861d4ee6aebe8c Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Tue, 18 Sep 2007 22:46:45 -0700 Subject: Fix user namespace exiting OOPs It turned out, that the user namespace is released during the do_exit() in exit_task_namespaces(), but the struct user_struct is released only during the put_task_struct(), i.e. MUCH later. On debug kernels with poisoned slabs this will cause the oops in uid_hash_remove() because the head of the chain, which resides inside the struct user_namespace, will be already freed and poisoned. Since the uid hash itself is required only when someone can search it, i.e. when the namespace is alive, we can safely unhash all the user_struct-s from it during the namespace exiting. The subsequent free_uid() will complete the user_struct destruction. For example simple program #include char stack[2 * 1024 * 1024]; int f(void *foo) { return 0; } int main(void) { clone(f, stack + 1 * 1024 * 1024, 0x10000000, 0); return 0; } run on kernel with CONFIG_USER_NS turned on will oops the kernel immediately. This was spotted during OpenVZ kernel testing. Signed-off-by: Pavel Emelyanov Signed-off-by: Alexey Dobriyan Acked-by: "Serge E. Hallyn" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sched.h | 1 + kernel/user.c | 26 +++++++++++++++++++++++++- kernel/user_namespace.c | 2 +- 3 files changed, 27 insertions(+), 2 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 6239bc2c2ba..5445eaec690 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1472,6 +1472,7 @@ static inline struct user_struct *get_uid(struct user_struct *u) } extern void free_uid(struct user_struct *); extern void switch_uid(struct user_struct *); +extern void release_uids(struct user_namespace *ns); #include diff --git a/kernel/user.c b/kernel/user.c index add57c7e4c0..9ca2848fc35 100644 --- a/kernel/user.c +++ b/kernel/user.c @@ -62,7 +62,7 @@ static inline void uid_hash_insert(struct user_struct *up, struct hlist_head *ha static inline void uid_hash_remove(struct user_struct *up) { - hlist_del(&up->uidhash_node); + hlist_del_init(&up->uidhash_node); } static inline struct user_struct *uid_hash_find(uid_t uid, struct hlist_head *hashent) @@ -199,6 +199,30 @@ void switch_uid(struct user_struct *new_user) suid_keys(current); } +void release_uids(struct user_namespace *ns) +{ + int i; + unsigned long flags; + struct hlist_head *head; + struct hlist_node *nd; + + spin_lock_irqsave(&uidhash_lock, flags); + /* + * collapse the chains so that the user_struct-s will + * be still alive, but not in hashes. subsequent free_uid() + * will free them. + */ + for (i = 0; i < UIDHASH_SZ; i++) { + head = ns->uidhash_table + i; + while (!hlist_empty(head)) { + nd = head->first; + hlist_del_init(nd); + } + } + spin_unlock_irqrestore(&uidhash_lock, flags); + + free_uid(ns->root_user); +} static int __init uid_cache_init(void) { diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c index e7ba1bf8457..7af90fc4f0f 100644 --- a/kernel/user_namespace.c +++ b/kernel/user_namespace.c @@ -81,7 +81,7 @@ void free_user_ns(struct kref *kref) struct user_namespace *ns; ns = container_of(kref, struct user_namespace, kref); - free_uid(ns->root_user); + release_uids(ns); kfree(ns); } -- cgit v1.2.3-70-g09d2 From 480eccf9ae1073b87bb4fe118971fbf134a5bc61 Mon Sep 17 00:00:00 2001 From: Lee Schermerhorn Date: Tue, 18 Sep 2007 22:46:47 -0700 Subject: Fix NUMA Memory Policy Reference Counting This patch proposes fixes to the reference counting of memory policy in the page allocation paths and in show_numa_map(). Extracted from my "Memory Policy Cleanups and Enhancements" series as stand-alone. Shared policy lookup [shmem] has always added a reference to the policy, but this was never unrefed after page allocation or after formatting the numa map data. Default system policy should not require additional ref counting, nor should the current task's task policy. However, show_numa_map() calls get_vma_policy() to examine what may be [likely is] another task's policy. The latter case needs protection against freeing of the policy. This patch adds a reference count to a mempolicy returned by get_vma_policy() when the policy is a vma policy or another task's mempolicy. Again, shared policy is already reference counted on lookup. A matching "unref" [__mpol_free()] is performed in alloc_page_vma() for shared and vma policies, and in show_numa_map() for shared and another task's mempolicy. We can call __mpol_free() directly, saving an admittedly inexpensive inline NULL test, because we know we have a non-NULL policy. Handling policy ref counts for hugepages is a bit trickier. huge_zonelist() returns a zone list that might come from a shared or vma 'BIND policy. In this case, we should hold the reference until after the huge page allocation in dequeue_hugepage(). The patch modifies huge_zonelist() to return a pointer to the mempolicy if it needs to be unref'd after allocation. Kernel Build [16cpu, 32GB, ia64] - average of 10 runs: w/o patch w/ refcount patch Avg Std Devn Avg Std Devn Real: 100.59 0.38 100.63 0.43 User: 1209.60 0.37 1209.91 0.31 System: 81.52 0.42 81.64 0.34 Signed-off-by: Lee Schermerhorn Acked-by: Andi Kleen Cc: Christoph Lameter Acked-by: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mempolicy.h | 4 +-- mm/hugetlb.c | 4 ++- mm/mempolicy.c | 79 +++++++++++++++++++++++++++++++++++++++++------ 3 files changed, 75 insertions(+), 12 deletions(-) diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h index 5bdd656e88c..a020eb2d4e2 100644 --- a/include/linux/mempolicy.h +++ b/include/linux/mempolicy.h @@ -159,7 +159,7 @@ extern void mpol_fix_fork_child_flag(struct task_struct *p); extern struct mempolicy default_policy; extern struct zonelist *huge_zonelist(struct vm_area_struct *vma, - unsigned long addr, gfp_t gfp_flags); + unsigned long addr, gfp_t gfp_flags, struct mempolicy **mpol); extern unsigned slab_node(struct mempolicy *policy); extern enum zone_type policy_zone; @@ -256,7 +256,7 @@ static inline void mpol_fix_fork_child_flag(struct task_struct *p) #define set_cpuset_being_rebound(x) do {} while (0) static inline struct zonelist *huge_zonelist(struct vm_area_struct *vma, - unsigned long addr, gfp_t gfp_flags) + unsigned long addr, gfp_t gfp_flags, struct mempolicy **mpol) { return NODE_DATA(0)->node_zonelists + gfp_zone(gfp_flags); } diff --git a/mm/hugetlb.c b/mm/hugetlb.c index de4cf458d6e..84c795ee2d6 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -71,8 +71,9 @@ static struct page *dequeue_huge_page(struct vm_area_struct *vma, { int nid; struct page *page = NULL; + struct mempolicy *mpol; struct zonelist *zonelist = huge_zonelist(vma, address, - htlb_alloc_mask); + htlb_alloc_mask, &mpol); struct zone **z; for (z = zonelist->zones; *z; z++) { @@ -87,6 +88,7 @@ static struct page *dequeue_huge_page(struct vm_area_struct *vma, break; } } + mpol_free(mpol); /* unref if mpol !NULL */ return page; } diff --git a/mm/mempolicy.c b/mm/mempolicy.c index bb54b88c3d5..3d6ac9505d0 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -1077,21 +1077,37 @@ asmlinkage long compat_sys_mbind(compat_ulong_t start, compat_ulong_t len, #endif -/* Return effective policy for a VMA */ +/* + * get_vma_policy(@task, @vma, @addr) + * @task - task for fallback if vma policy == default + * @vma - virtual memory area whose policy is sought + * @addr - address in @vma for shared policy lookup + * + * Returns effective policy for a VMA at specified address. + * Falls back to @task or system default policy, as necessary. + * Returned policy has extra reference count if shared, vma, + * or some other task's policy [show_numa_maps() can pass + * @task != current]. It is the caller's responsibility to + * free the reference in these cases. + */ static struct mempolicy * get_vma_policy(struct task_struct *task, struct vm_area_struct *vma, unsigned long addr) { struct mempolicy *pol = task->mempolicy; + int shared_pol = 0; if (vma) { - if (vma->vm_ops && vma->vm_ops->get_policy) + if (vma->vm_ops && vma->vm_ops->get_policy) { pol = vma->vm_ops->get_policy(vma, addr); - else if (vma->vm_policy && + shared_pol = 1; /* if pol non-NULL, add ref below */ + } else if (vma->vm_policy && vma->vm_policy->policy != MPOL_DEFAULT) pol = vma->vm_policy; } if (!pol) pol = &default_policy; + else if (!shared_pol && pol != current->mempolicy) + mpol_get(pol); /* vma or other task's policy */ return pol; } @@ -1207,19 +1223,45 @@ static inline unsigned interleave_nid(struct mempolicy *pol, } #ifdef CONFIG_HUGETLBFS -/* Return a zonelist suitable for a huge page allocation. */ +/* + * huge_zonelist(@vma, @addr, @gfp_flags, @mpol) + * @vma = virtual memory area whose policy is sought + * @addr = address in @vma for shared policy lookup and interleave policy + * @gfp_flags = for requested zone + * @mpol = pointer to mempolicy pointer for reference counted 'BIND policy + * + * Returns a zonelist suitable for a huge page allocation. + * If the effective policy is 'BIND, returns pointer to policy's zonelist. + * If it is also a policy for which get_vma_policy() returns an extra + * reference, we must hold that reference until after allocation. + * In that case, return policy via @mpol so hugetlb allocation can drop + * the reference. For non-'BIND referenced policies, we can/do drop the + * reference here, so the caller doesn't need to know about the special case + * for default and current task policy. + */ struct zonelist *huge_zonelist(struct vm_area_struct *vma, unsigned long addr, - gfp_t gfp_flags) + gfp_t gfp_flags, struct mempolicy **mpol) { struct mempolicy *pol = get_vma_policy(current, vma, addr); + struct zonelist *zl; + *mpol = NULL; /* probably no unref needed */ if (pol->policy == MPOL_INTERLEAVE) { unsigned nid; nid = interleave_nid(pol, vma, addr, HPAGE_SHIFT); + __mpol_free(pol); /* finished with pol */ return NODE_DATA(nid)->node_zonelists + gfp_zone(gfp_flags); } - return zonelist_policy(GFP_HIGHUSER, pol); + + zl = zonelist_policy(GFP_HIGHUSER, pol); + if (unlikely(pol != &default_policy && pol != current->mempolicy)) { + if (pol->policy != MPOL_BIND) + __mpol_free(pol); /* finished with pol */ + else + *mpol = pol; /* unref needed after allocation */ + } + return zl; } #endif @@ -1264,6 +1306,7 @@ struct page * alloc_page_vma(gfp_t gfp, struct vm_area_struct *vma, unsigned long addr) { struct mempolicy *pol = get_vma_policy(current, vma, addr); + struct zonelist *zl; cpuset_update_task_memory_state(); @@ -1273,7 +1316,19 @@ alloc_page_vma(gfp_t gfp, struct vm_area_struct *vma, unsigned long addr) nid = interleave_nid(pol, vma, addr, PAGE_SHIFT); return alloc_page_interleave(gfp, 0, nid); } - return __alloc_pages(gfp, 0, zonelist_policy(gfp, pol)); + zl = zonelist_policy(gfp, pol); + if (pol != &default_policy && pol != current->mempolicy) { + /* + * slow path: ref counted policy -- shared or vma + */ + struct page *page = __alloc_pages(gfp, 0, zl); + __mpol_free(pol); + return page; + } + /* + * fast path: default or task policy + */ + return __alloc_pages(gfp, 0, zl); } /** @@ -1872,6 +1927,7 @@ int show_numa_map(struct seq_file *m, void *v) struct numa_maps *md; struct file *file = vma->vm_file; struct mm_struct *mm = vma->vm_mm; + struct mempolicy *pol; int n; char buffer[50]; @@ -1882,8 +1938,13 @@ int show_numa_map(struct seq_file *m, void *v) if (!md) return 0; - mpol_to_str(buffer, sizeof(buffer), - get_vma_policy(priv->task, vma, vma->vm_start)); + pol = get_vma_policy(priv->task, vma, vma->vm_start); + mpol_to_str(buffer, sizeof(buffer), pol); + /* + * unref shared or other task's mempolicy + */ + if (pol != &default_policy && pol != current->mempolicy) + __mpol_free(pol); seq_printf(m, "%08lx %s", vma->vm_start, buffer); -- cgit v1.2.3-70-g09d2 From 508a92741a105e2e3d466cd727fb73154ebf08de Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Tue, 18 Sep 2007 22:46:49 -0700 Subject: uml: fix irqstack crash This patch fixes a crash caused by an interrupt coming in when an IRQ stack is being torn down. When this happens, handle_signal will loop, setting up the IRQ stack again because the tearing down had finished, and handling whatever signals had come in. However, to_irq_stack returns a mask of pending signals to be handled, plus bit zero is set if the IRQ stack was already active, and thus shouldn't be torn down. This causes a problem because when handle_signal goes around the loop, sig will be zero, and to_irq_stack will duly set bit zero in the returned mask, faking handle_signal into believing that it shouldn't tear down the IRQ stack and return thread_info pointers back to their original values. This will eventually cause a crash, as the IRQ stack thread_info will continue pointing to the original task_struct and an interrupt will look into it after it has been freed. The fix is to stop passing a signal number into to_irq_stack. Rather, the pending signals mask is initialized beforehand with the bit for sig already set. References to sig in to_irq_stack can be replaced with references to the mask. [akpm@linux-foundation.org: use UL] Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/include/kern_util.h | 2 +- arch/um/kernel/irq.c | 7 ++++--- arch/um/os-Linux/signal.c | 4 ++-- 3 files changed, 7 insertions(+), 6 deletions(-) diff --git a/arch/um/include/kern_util.h b/arch/um/include/kern_util.h index 8d7f7c1cb9c..6c2be26f1d7 100644 --- a/arch/um/include/kern_util.h +++ b/arch/um/include/kern_util.h @@ -117,7 +117,7 @@ extern void sigio_handler(int sig, union uml_pt_regs *regs); extern void copy_sc(union uml_pt_regs *regs, void *from); -unsigned long to_irq_stack(int sig, unsigned long *mask_out); +extern unsigned long to_irq_stack(unsigned long *mask_out); unsigned long from_irq_stack(int nested); #endif diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index 9870febdbea..cf0dd9cf8c4 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -518,13 +518,13 @@ int init_aio_irq(int irq, char *name, irq_handler_t handler) static unsigned long pending_mask; -unsigned long to_irq_stack(int sig, unsigned long *mask_out) +unsigned long to_irq_stack(unsigned long *mask_out) { struct thread_info *ti; unsigned long mask, old; int nested; - mask = xchg(&pending_mask, 1 << sig); + mask = xchg(&pending_mask, *mask_out); if(mask != 0){ /* If any interrupts come in at this point, we want to * make sure that their bits aren't lost by our @@ -534,7 +534,7 @@ unsigned long to_irq_stack(int sig, unsigned long *mask_out) * and pending_mask contains a bit for each interrupt * that came in. */ - old = 1 << sig; + old = *mask_out; do { old |= mask; mask = xchg(&pending_mask, old); @@ -550,6 +550,7 @@ unsigned long to_irq_stack(int sig, unsigned long *mask_out) task = cpu_tasks[ti->cpu].task; tti = task_thread_info(task); + *ti = *tti; ti->real_thread = tti; task->stack = ti; diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c index 18e5c8b67eb..b98f7ea2d2f 100644 --- a/arch/um/os-Linux/signal.c +++ b/arch/um/os-Linux/signal.c @@ -119,7 +119,7 @@ void (*handlers[_NSIG])(int sig, struct sigcontext *sc); void handle_signal(int sig, struct sigcontext *sc) { - unsigned long pending = 0; + unsigned long pending = 1UL << sig; do { int nested, bail; @@ -134,7 +134,7 @@ void handle_signal(int sig, struct sigcontext *sc) * have to return, and the upper handler will deal * with this interrupt. */ - bail = to_irq_stack(sig, &pending); + bail = to_irq_stack(&pending); if(bail) return; -- cgit v1.2.3-70-g09d2 From 4f01a757e75f2a3cab2bab89c4176498963946b9 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 18 Sep 2007 22:46:50 -0700 Subject: Driver core: fix deprectated sysfs structure for nested class devices Nested class devices used to have 'device' symlink point to a real (physical) device instead of a parent class device. When converting subsystems to struct device we need to keep doing what class devices did if CONFIG_SYSFS_DEPRECATED is Y, otherwise parts of udev break. Signed-off-by: Dmitry Torokhov Cc: Kay Sievers Acked-by: Greg KH Tested-by: Anssi Hannula Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/base/core.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index e6738bcbe5a..6de33d7a29b 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -679,14 +679,26 @@ static int device_add_class_symlinks(struct device *dev) goto out_subsys; } if (dev->parent) { - error = sysfs_create_link(&dev->kobj, &dev->parent->kobj, - "device"); - if (error) - goto out_busid; #ifdef CONFIG_SYSFS_DEPRECATED { - char * class_name = make_class_name(dev->class->name, - &dev->kobj); + struct device *parent = dev->parent; + char *class_name; + + /* + * In old sysfs stacked class devices had 'device' + * link pointing to real device instead of parent + */ + while (parent->class && !parent->bus && parent->parent) + parent = parent->parent; + + error = sysfs_create_link(&dev->kobj, + &parent->kobj, + "device"); + if (error) + goto out_busid; + + class_name = make_class_name(dev->class->name, + &dev->kobj); if (class_name) error = sysfs_create_link(&dev->parent->kobj, &dev->kobj, class_name); @@ -694,6 +706,11 @@ static int device_add_class_symlinks(struct device *dev) if (error) goto out_device; } +#else + error = sysfs_create_link(&dev->kobj, &dev->parent->kobj, + "device"); + if (error) + goto out_busid; #endif } return 0; -- cgit v1.2.3-70-g09d2 From 68835999435e01311ab57f5556169ad2966b6828 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 17 Sep 2007 16:58:18 +0100 Subject: [MIPS] DEC: Initialise ioasic_ssr_lock Fix the definition of the ioasic_ssr_lock spinlock to include a proper initialisation. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle --- arch/mips/dec/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c index b8a5e75ba0a..3e634f2f544 100644 --- a/arch/mips/dec/setup.c +++ b/arch/mips/dec/setup.c @@ -55,7 +55,7 @@ EXPORT_SYMBOL(dec_kn_slot_size); int dec_tc_bus; -spinlock_t ioasic_ssr_lock; +DEFINE_SPINLOCK(ioasic_ssr_lock); volatile u32 *ioasic_base; -- cgit v1.2.3-70-g09d2 From 09abbcffb3ee63fb8712c008df0c6878860777b7 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 17 Sep 2007 17:11:07 +0100 Subject: [MIPS] cpu-bugs64.c: GCC 3.3 constraint workaround Add a workaround to address warnings generated on the "n" constraint by GCC 3.3 and below. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle --- arch/mips/kernel/cpu-bugs64.c | 4 ++-- include/asm-mips/compiler.h | 4 +++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c index ac04f0adc40..6648fde20b9 100644 --- a/arch/mips/kernel/cpu-bugs64.c +++ b/arch/mips/kernel/cpu-bugs64.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2003, 2004 Maciej W. Rozycki + * Copyright (C) 2003, 2004, 2007 Maciej W. Rozycki * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -29,7 +29,7 @@ static inline void align_mod(const int align, const int mod) ".endr\n\t" ".set pop" : - : "rn" (align), "rn" (mod)); + : GCC_IMM_ASM (align), GCC_IMM_ASM (mod)); } static inline void mult_sh_align_mod(long *v1, long *v2, long *w, diff --git a/include/asm-mips/compiler.h b/include/asm-mips/compiler.h index 169ae26105e..aa6b876bbd7 100644 --- a/include/asm-mips/compiler.h +++ b/include/asm-mips/compiler.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004 Maciej W. Rozycki + * Copyright (C) 2004, 2007 Maciej W. Rozycki * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -9,8 +9,10 @@ #define _ASM_COMPILER_H #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) +#define GCC_IMM_ASM "n" #define GCC_REG_ACCUM "$0" #else +#define GCC_IMM_ASM "rn" #define GCC_REG_ACCUM "accum" #endif -- cgit v1.2.3-70-g09d2 From dbe3ed1c078c193be34326728d494c5c4bc115e2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 19 Sep 2007 11:37:14 -0700 Subject: x86-64: page faults from user mode are always user faults Randy Dunlap noticed an interesting "crashme" behaviour on his dual Prescott Xeon setup, where he gets page faults with the error code having a zero "user" bit, but the register state points back to user mode. This may be a CPU microcode buglet triggered by some strange instruction pattern that crashme generates, and loading a microcode update seems to possibly have fixed it. Regardless, we really should trust the register state more than the error code, since it's really the register state that determines whether we can actually send a signal, or whether we're in kernel mode and need to oops/kill the process in the case of a page fault. Cc: Randy Dunlap Signed-off-by: Linus Torvalds --- arch/x86_64/mm/fault.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/x86_64/mm/fault.c b/arch/x86_64/mm/fault.c index 327c9f2fa62..54816adb8e9 100644 --- a/arch/x86_64/mm/fault.c +++ b/arch/x86_64/mm/fault.c @@ -374,6 +374,13 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, if (unlikely(in_atomic() || !mm)) goto bad_area_nosemaphore; + /* + * User-mode registers count as a user access even for any + * potential system fault or CPU buglet. + */ + if (user_mode_vm(regs)) + error_code |= PF_USER; + again: /* When running in the kernel we expect faults to occur only to * addresses in user space. All other faults represent errors in the -- cgit v1.2.3-70-g09d2