From 11daf32be9a6041a2406c2cbf76b75a9c4a6eaaa Mon Sep 17 00:00:00 2001 From: Matteo Facchinetti Date: Fri, 20 Dec 2013 10:16:22 +0100 Subject: powerpc/512x: dts: disable MPC5125 usb module At the moment the USB controller's pin muxing is not setup correctly and causes a kernel panic upon system startup, so disable the USB1 device tree node in the MPC5125 tower board dts file. The USB controller is connected to an USB3320 ULPI transceiver and the device tree should receive an update to reflect correct dependencies and required initialization data before the USB1 node can get re-enabled. Signed-off-by: Matteo Facchinetti Signed-off-by: Anatolij Gustschin --- arch/powerpc/boot/dts/mpc5125twr.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts index 0a0fe92216a..a618dfc13e4 100644 --- a/arch/powerpc/boot/dts/mpc5125twr.dts +++ b/arch/powerpc/boot/dts/mpc5125twr.dts @@ -188,6 +188,10 @@ reg = <0xA000 0x1000>; }; + // disable USB1 port + // TODO: + // correct pinmux config and fix USB3320 ulpi dependency + // before re-enabling it usb@3000 { compatible = "fsl,mpc5121-usb2-dr"; reg = <0x3000 0x400>; @@ -196,6 +200,7 @@ interrupts = <43 0x8>; dr_mode = "host"; phy_type = "ulpi"; + status = "disabled"; }; // 5125 PSCs are not 52xx or 5121 PSC compatible -- cgit v1.2.3-70-g09d2