From f037484337ce009ff840de07ca3232808101db09 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 3 Jan 2011 07:33:25 -0300 Subject: [media] tda9875: remove duplicate driver In commit 411674fd189abe5910ea4caf08b7eac5c4a4d967 the tda9875 support was added to tvaudio. This means that tda9875 is no longer used since mid-2009. If there are out-of-tree users of this driver, then they can switch to tvaudio instead. The original commit message read as follows: This change allows bttv to use tvaudio for this device. Since this device has the same i2c address as the tda9874 we need to support both in the same tvaudio driver. This makes it possible for tvaudio to detect which chip is used. Originally the tda9875 was only available in the dedicated tda9875 driver, but that makes life very hard for bttv since loading tvaudio might misdetect a tda9875 as a tda9874. So there were good reasons for moving the tda9875 code into tvaudio. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 9 - drivers/media/video/Makefile | 1 - drivers/media/video/tda9875.c | 411 ------------------------------------------ 3 files changed, 421 deletions(-) delete mode 100644 drivers/media/video/tda9875.c diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index eb875af05e7..ef3e9852f37 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -141,15 +141,6 @@ config VIDEO_TDA9840 To compile this driver as a module, choose M here: the module will be called tda9840. -config VIDEO_TDA9875 - tristate "Philips TDA9875 audio processor" - depends on VIDEO_V4L2 && I2C - ---help--- - Support for tda9875 audio decoder chip found on some bt8xx boards. - - To compile this driver as a module, choose M here: the - module will be called tda9875. - config VIDEO_TEA6415C tristate "Philips TEA6415C audio processor" depends on I2C diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 81e38cb0b84..a509d317e25 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -27,7 +27,6 @@ obj-$(CONFIG_VIDEO_V4L2_COMMON) += v4l2-common.o obj-$(CONFIG_VIDEO_TUNER) += tuner.o obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o -obj-$(CONFIG_VIDEO_TDA9875) += tda9875.o obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o diff --git a/drivers/media/video/tda9875.c b/drivers/media/video/tda9875.c deleted file mode 100644 index 35b6ff5db31..00000000000 --- a/drivers/media/video/tda9875.c +++ /dev/null @@ -1,411 +0,0 @@ -/* - * For the TDA9875 chip - * (The TDA9875 is used on the Diamond DTV2000 french version - * Other cards probably use these chips as well.) - * This driver will not complain if used with any - * other i2c device with the same address. - * - * Copyright (c) 2000 Guillaume Delvit based on Gerd Knorr source and - * Eric Sandeen - * Copyright (c) 2006 Mauro Carvalho Chehab - * This code is placed under the terms of the GNU General Public License - * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu) - * Which was based on tda8425.c by Greg Alexander (c) 1998 - * - * OPTIONS: - * debug - set to 1 if you'd like to see debug messages - * - * Revision: 0.1 - original version - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static int debug; /* insmod parameter */ -module_param(debug, int, S_IRUGO | S_IWUSR); -MODULE_LICENSE("GPL"); - - -/* This is a superset of the TDA9875 */ -struct tda9875 { - struct v4l2_subdev sd; - int rvol, lvol; - int bass, treble; -}; - -static inline struct tda9875 *to_state(struct v4l2_subdev *sd) -{ - return container_of(sd, struct tda9875, sd); -} - -#define dprintk if (debug) printk - -/* The TDA9875 is made by Philips Semiconductor - * http://www.semiconductors.philips.com - * TDA9875: I2C-bus controlled DSP audio processor, FM demodulator - * - */ - - /* subaddresses for TDA9875 */ -#define TDA9875_MUT 0x12 /*General mute (value --> 0b11001100*/ -#define TDA9875_CFG 0x01 /* Config register (value --> 0b00000000 */ -#define TDA9875_DACOS 0x13 /*DAC i/o select (ADC) 0b0000100*/ -#define TDA9875_LOSR 0x16 /*Line output select regirter 0b0100 0001*/ - -#define TDA9875_CH1V 0x0c /*Channel 1 volume (mute)*/ -#define TDA9875_CH2V 0x0d /*Channel 2 volume (mute)*/ -#define TDA9875_SC1 0x14 /*SCART 1 in (mono)*/ -#define TDA9875_SC2 0x15 /*SCART 2 in (mono)*/ - -#define TDA9875_ADCIS 0x17 /*ADC input select (mono) 0b0110 000*/ -#define TDA9875_AER 0x19 /*Audio effect (AVL+Pseudo) 0b0000 0110*/ -#define TDA9875_MCS 0x18 /*Main channel select (DAC) 0b0000100*/ -#define TDA9875_MVL 0x1a /* Main volume gauche */ -#define TDA9875_MVR 0x1b /* Main volume droite */ -#define TDA9875_MBA 0x1d /* Main Basse */ -#define TDA9875_MTR 0x1e /* Main treble */ -#define TDA9875_ACS 0x1f /* Auxilary channel select (FM) 0b0000000*/ -#define TDA9875_AVL 0x20 /* Auxilary volume gauche */ -#define TDA9875_AVR 0x21 /* Auxilary volume droite */ -#define TDA9875_ABA 0x22 /* Auxilary Basse */ -#define TDA9875_ATR 0x23 /* Auxilary treble */ - -#define TDA9875_MSR 0x02 /* Monitor select register */ -#define TDA9875_C1MSB 0x03 /* Carrier 1 (FM) frequency register MSB */ -#define TDA9875_C1MIB 0x04 /* Carrier 1 (FM) frequency register (16-8]b */ -#define TDA9875_C1LSB 0x05 /* Carrier 1 (FM) frequency register LSB */ -#define TDA9875_C2MSB 0x06 /* Carrier 2 (nicam) frequency register MSB */ -#define TDA9875_C2MIB 0x07 /* Carrier 2 (nicam) frequency register (16-8]b */ -#define TDA9875_C2LSB 0x08 /* Carrier 2 (nicam) frequency register LSB */ -#define TDA9875_DCR 0x09 /* Demodulateur configuration regirter*/ -#define TDA9875_DEEM 0x0a /* FM de-emphasis regirter*/ -#define TDA9875_FMAT 0x0b /* FM Matrix regirter*/ - -/* values */ -#define TDA9875_MUTE_ON 0xff /* general mute */ -#define TDA9875_MUTE_OFF 0xcc /* general no mute */ - - - -/* Begin code */ - -static int tda9875_write(struct v4l2_subdev *sd, int subaddr, unsigned char val) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - unsigned char buffer[2]; - - v4l2_dbg(1, debug, sd, "Writing %d 0x%x\n", subaddr, val); - buffer[0] = subaddr; - buffer[1] = val; - if (2 != i2c_master_send(client, buffer, 2)) { - v4l2_warn(sd, "I/O error, trying (write %d 0x%x)\n", - subaddr, val); - return -1; - } - return 0; -} - - -static int i2c_read_register(struct i2c_client *client, int addr, int reg) -{ - unsigned char write[1]; - unsigned char read[1]; - struct i2c_msg msgs[2] = { - { addr, 0, 1, write }, - { addr, I2C_M_RD, 1, read } - }; - - write[0] = reg; - - if (2 != i2c_transfer(client->adapter, msgs, 2)) { - v4l_warn(client, "I/O error (read2)\n"); - return -1; - } - v4l_dbg(1, debug, client, "chip_read2: reg%d=0x%x\n", reg, read[0]); - return read[0]; -} - -static void tda9875_set(struct v4l2_subdev *sd) -{ - struct tda9875 *tda = to_state(sd); - unsigned char a; - - v4l2_dbg(1, debug, sd, "tda9875_set(%04x,%04x,%04x,%04x)\n", - tda->lvol, tda->rvol, tda->bass, tda->treble); - - a = tda->lvol & 0xff; - tda9875_write(sd, TDA9875_MVL, a); - a =tda->rvol & 0xff; - tda9875_write(sd, TDA9875_MVR, a); - a =tda->bass & 0xff; - tda9875_write(sd, TDA9875_MBA, a); - a =tda->treble & 0xff; - tda9875_write(sd, TDA9875_MTR, a); -} - -static void do_tda9875_init(struct v4l2_subdev *sd) -{ - struct tda9875 *t = to_state(sd); - - v4l2_dbg(1, debug, sd, "In tda9875_init\n"); - tda9875_write(sd, TDA9875_CFG, 0xd0); /*reg de config 0 (reset)*/ - tda9875_write(sd, TDA9875_MSR, 0x03); /* Monitor 0b00000XXX*/ - tda9875_write(sd, TDA9875_C1MSB, 0x00); /*Car1(FM) MSB XMHz*/ - tda9875_write(sd, TDA9875_C1MIB, 0x00); /*Car1(FM) MIB XMHz*/ - tda9875_write(sd, TDA9875_C1LSB, 0x00); /*Car1(FM) LSB XMHz*/ - tda9875_write(sd, TDA9875_C2MSB, 0x00); /*Car2(NICAM) MSB XMHz*/ - tda9875_write(sd, TDA9875_C2MIB, 0x00); /*Car2(NICAM) MIB XMHz*/ - tda9875_write(sd, TDA9875_C2LSB, 0x00); /*Car2(NICAM) LSB XMHz*/ - tda9875_write(sd, TDA9875_DCR, 0x00); /*Demod config 0x00*/ - tda9875_write(sd, TDA9875_DEEM, 0x44); /*DE-Emph 0b0100 0100*/ - tda9875_write(sd, TDA9875_FMAT, 0x00); /*FM Matrix reg 0x00*/ - tda9875_write(sd, TDA9875_SC1, 0x00); /* SCART 1 (SC1)*/ - tda9875_write(sd, TDA9875_SC2, 0x01); /* SCART 2 (sc2)*/ - - tda9875_write(sd, TDA9875_CH1V, 0x10); /* Channel volume 1 mute*/ - tda9875_write(sd, TDA9875_CH2V, 0x10); /* Channel volume 2 mute */ - tda9875_write(sd, TDA9875_DACOS, 0x02); /* sig DAC i/o(in:nicam)*/ - tda9875_write(sd, TDA9875_ADCIS, 0x6f); /* sig ADC input(in:mono)*/ - tda9875_write(sd, TDA9875_LOSR, 0x00); /* line out (in:mono)*/ - tda9875_write(sd, TDA9875_AER, 0x00); /*06 Effect (AVL+PSEUDO) */ - tda9875_write(sd, TDA9875_MCS, 0x44); /* Main ch select (DAC) */ - tda9875_write(sd, TDA9875_MVL, 0x03); /* Vol Main left 10dB */ - tda9875_write(sd, TDA9875_MVR, 0x03); /* Vol Main right 10dB*/ - tda9875_write(sd, TDA9875_MBA, 0x00); /* Main Bass Main 0dB*/ - tda9875_write(sd, TDA9875_MTR, 0x00); /* Main Treble Main 0dB*/ - tda9875_write(sd, TDA9875_ACS, 0x44); /* Aux chan select (dac)*/ - tda9875_write(sd, TDA9875_AVL, 0x00); /* Vol Aux left 0dB*/ - tda9875_write(sd, TDA9875_AVR, 0x00); /* Vol Aux right 0dB*/ - tda9875_write(sd, TDA9875_ABA, 0x00); /* Aux Bass Main 0dB*/ - tda9875_write(sd, TDA9875_ATR, 0x00); /* Aux Aigus Main 0dB*/ - - tda9875_write(sd, TDA9875_MUT, 0xcc); /* General mute */ - - t->lvol = t->rvol = 0; /* 0dB */ - t->bass = 0; /* 0dB */ - t->treble = 0; /* 0dB */ - tda9875_set(sd); -} - - -static int tda9875_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct tda9875 *t = to_state(sd); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_VOLUME: - { - int left = (t->lvol+84)*606; - int right = (t->rvol+84)*606; - - ctrl->value=max(left,right); - return 0; - } - case V4L2_CID_AUDIO_BALANCE: - { - int left = (t->lvol+84)*606; - int right = (t->rvol+84)*606; - int volume = max(left,right); - int balance = (32768*min(left,right))/ - (volume ? volume : 1); - ctrl->value=(leftvalue = (t->bass+12)*2427; /* min -12 max +15 */ - return 0; - case V4L2_CID_AUDIO_TREBLE: - ctrl->value = (t->treble+12)*2730;/* min -12 max +12 */ - return 0; - } - return -EINVAL; -} - -static int tda9875_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct tda9875 *t = to_state(sd); - int chvol = 0, volume = 0, balance = 0, left, right; - - switch (ctrl->id) { - case V4L2_CID_AUDIO_VOLUME: - left = (t->lvol+84)*606; - right = (t->rvol+84)*606; - - volume = max(left,right); - balance = (32768*min(left,right))/ - (volume ? volume : 1); - balance =(leftvalue; - - chvol=1; - break; - case V4L2_CID_AUDIO_BALANCE: - left = (t->lvol+84)*606; - right = (t->rvol+84)*606; - - volume=max(left,right); - - balance = ctrl->value; - - chvol=1; - break; - case V4L2_CID_AUDIO_BASS: - t->bass = ((ctrl->value/2400)-12) & 0xff; - if (t->bass > 15) - t->bass = 15; - if (t->bass < -12) - t->bass = -12 & 0xff; - break; - case V4L2_CID_AUDIO_TREBLE: - t->treble = ((ctrl->value/2700)-12) & 0xff; - if (t->treble > 12) - t->treble = 12; - if (t->treble < -12) - t->treble = -12 & 0xff; - break; - default: - return -EINVAL; - } - - if (chvol) { - left = (min(65536 - balance,32768) * - volume) / 32768; - right = (min(balance,32768) * - volume) / 32768; - t->lvol = ((left/606)-84) & 0xff; - if (t->lvol > 24) - t->lvol = 24; - if (t->lvol < -84) - t->lvol = -84 & 0xff; - - t->rvol = ((right/606)-84) & 0xff; - if (t->rvol > 24) - t->rvol = 24; - if (t->rvol < -84) - t->rvol = -84 & 0xff; - } - - tda9875_set(sd); - return 0; -} - -static int tda9875_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 58880); - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768); - } - return -EINVAL; -} - -/* ----------------------------------------------------------------------- */ - -static const struct v4l2_subdev_core_ops tda9875_core_ops = { - .queryctrl = tda9875_queryctrl, - .g_ctrl = tda9875_g_ctrl, - .s_ctrl = tda9875_s_ctrl, -}; - -static const struct v4l2_subdev_ops tda9875_ops = { - .core = &tda9875_core_ops, -}; - -/* ----------------------------------------------------------------------- */ - - -/* *********************** * - * i2c interface functions * - * *********************** */ - -static int tda9875_checkit(struct i2c_client *client, int addr) -{ - int dic, rev; - - dic = i2c_read_register(client, addr, 254); - rev = i2c_read_register(client, addr, 255); - - if (dic == 0 || dic == 2) { /* tda9875 and tda9875A */ - v4l_info(client, "tda9875%s rev. %d detected at 0x%02x\n", - dic == 0 ? "" : "A", rev, addr << 1); - return 1; - } - v4l_info(client, "no such chip at 0x%02x (dic=0x%x rev=0x%x)\n", - addr << 1, dic, rev); - return 0; -} - -static int tda9875_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct tda9875 *t; - struct v4l2_subdev *sd; - - v4l_info(client, "chip found @ 0x%02x (%s)\n", - client->addr << 1, client->adapter->name); - - if (!tda9875_checkit(client, client->addr)) - return -ENODEV; - - t = kzalloc(sizeof(*t), GFP_KERNEL); - if (!t) - return -ENOMEM; - sd = &t->sd; - v4l2_i2c_subdev_init(sd, client, &tda9875_ops); - - do_tda9875_init(sd); - return 0; -} - -static int tda9875_remove(struct i2c_client *client) -{ - struct v4l2_subdev *sd = i2c_get_clientdata(client); - - do_tda9875_init(sd); - v4l2_device_unregister_subdev(sd); - kfree(to_state(sd)); - return 0; -} - -static const struct i2c_device_id tda9875_id[] = { - { "tda9875", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, tda9875_id); - -static struct i2c_driver tda9875_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "tda9875", - }, - .probe = tda9875_probe, - .remove = tda9875_remove, - .id_table = tda9875_id, -}; - -static __init int init_tda9875(void) -{ - return i2c_add_driver(&tda9875_driver); -} - -static __exit void exit_tda9875(void) -{ - i2c_del_driver(&tda9875_driver); -} - -module_init(init_tda9875); -module_exit(exit_tda9875); -- cgit v1.2.3-70-g09d2 From b219ab9cfb2057de6e779169197f83265c310c83 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 3 Jan 2011 07:39:41 -0300 Subject: [media] bttv: remove obsolete 'no_tda9875' field Since tda9875 is part of tvaudio this field no longer makes sense. Remove it. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-cards.c | 39 ---------------------------------- drivers/media/video/bt8xx/bttv.h | 1 - 2 files changed, 40 deletions(-) diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 49efcf660ba..7f58756d72c 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -1373,7 +1373,6 @@ struct tvcard bttv_tvcards[] = { .gpiomute = 0x1800, .audio_mode_gpio= fv2000s_audio, .no_msp34xx = 1, - .no_tda9875 = 1, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, @@ -1511,7 +1510,6 @@ struct tvcard bttv_tvcards[] = { .gpiomute = 0x09, .needs_tvaudio = 1, .no_msp34xx = 1, - .no_tda9875 = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, @@ -1550,7 +1548,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask2 = 0x07ff, .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), .no_msp34xx = 1, - .no_tda9875 = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .muxsel_hook = rv605_muxsel, @@ -1686,7 +1683,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY1x0_848] = { @@ -1699,7 +1695,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, @@ -1714,7 +1709,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY1x1] = { @@ -1727,7 +1721,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY1x1_SVID] = { @@ -1740,7 +1733,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY2xx] = { @@ -1753,7 +1745,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, @@ -1768,7 +1759,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY2x0] = { @@ -1781,7 +1771,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY500] = { @@ -1794,7 +1783,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY540] = { @@ -1805,7 +1793,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, @@ -1820,7 +1807,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */ }, [BTTV_BOARD_IDS_EAGLE] = { @@ -1835,7 +1821,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 2, 2, 2), .muxsel_hook = eagle_muxsel, .no_msp34xx = 1, - .no_tda9875 = 1, .pll = PLL_28, }, [BTTV_BOARD_PINNACLESAT] = { @@ -1846,7 +1831,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .muxsel = MUXSEL(3, 1), .pll = PLL_28, @@ -1897,7 +1881,6 @@ struct tvcard bttv_tvcards[] = { .svhs = 2, .gpiomask = 0, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .muxsel = MUXSEL(2, 0, 1), .pll = PLL_28, @@ -1970,7 +1953,6 @@ struct tvcard bttv_tvcards[] = { /* Tuner, CVid, SVid, CVid over SVid connector */ .muxsel = MUXSEL(2, 3, 1, 1), .gpiomask = 0, - .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = TUNER_PHILIPS_PAL_I, .tuner_addr = ADDR_UNSET, @@ -2017,7 +1999,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0), .muxsel_hook = xguard_muxsel, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, }, @@ -2029,7 +2010,6 @@ struct tvcard bttv_tvcards[] = { .svhs = NO_SVHS, .muxsel = MUXSEL(2, 3, 1, 0), .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, @@ -2134,7 +2114,6 @@ struct tvcard bttv_tvcards[] = { .svhs = NO_SVHS, /* card has no svhs */ .needs_tvaudio = 0, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .gpiomask = 0x00, .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), @@ -2156,7 +2135,6 @@ struct tvcard bttv_tvcards[] = { [BTTV_BOARD_TWINHAN_DST] = { .name = "Twinhan DST + clones", .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2171,7 +2149,6 @@ struct tvcard bttv_tvcards[] = { /* Vid In, SVid In, Vid over SVid in connector */ .muxsel = MUXSEL(3, 1, 1, 3), .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2226,7 +2203,6 @@ struct tvcard bttv_tvcards[] = { .svhs = NO_SVHS, .muxsel = MUXSEL(2, 3, 1, 0), .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .needs_tvaudio = 0, .tuner_type = TUNER_ABSENT, @@ -2278,7 +2254,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0, .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/ .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, /*878A input is always MUX0, see above.*/ .muxsel = MUXSEL(2, 2, 2, 2), @@ -2302,7 +2277,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_TEMIC_PAL, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, }, [BTTV_BOARD_AVDVBT_771] = { /* Wolfram Joost */ @@ -2313,7 +2287,6 @@ struct tvcard bttv_tvcards[] = { .tuner_addr = ADDR_UNSET, .muxsel = MUXSEL(3, 3), .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .has_dvb = 1, @@ -2329,7 +2302,6 @@ struct tvcard bttv_tvcards[] = { .svhs = 1, .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */ .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .tuner_type = TUNER_ABSENT, @@ -2393,7 +2365,6 @@ struct tvcard bttv_tvcards[] = { /* Chris Pascoe */ .name = "DViCO FusionHDTV DVB-T Lite", .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .no_video = 1, @@ -2440,7 +2411,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), .pll = PLL_28, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2478,7 +2448,6 @@ struct tvcard bttv_tvcards[] = { .pll = PLL_28, .no_msp34xx = 1, .no_tda7432 = 1, - .no_tda9875 = 1, .muxsel_hook = kodicom4400r_muxsel, }, [BTTV_BOARD_KODICOM_4400R_SL] = { @@ -2500,7 +2469,6 @@ struct tvcard bttv_tvcards[] = { .pll = PLL_28, .no_msp34xx = 1, .no_tda7432 = 1, - .no_tda9875 = 1, .muxsel_hook = kodicom4400r_muxsel, }, /* ---- card 0x86---------------------------------- */ @@ -2530,7 +2498,6 @@ struct tvcard bttv_tvcards[] = { .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, .gpiomute = 0x00c00007, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .has_dvb = 1, }, @@ -2630,7 +2597,6 @@ struct tvcard bttv_tvcards[] = { .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, /* ---- card 0x8d ---------------------------------- */ @@ -2658,7 +2624,6 @@ struct tvcard bttv_tvcards[] = { .muxsel = MUXSEL(2, 3, 1, 1), .gpiomux = { 100000, 100002, 100002, 100000 }, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .tuner_type = TUNER_TNF_5335MF, @@ -2674,7 +2639,6 @@ struct tvcard bttv_tvcards[] = { .gpiomask = 0x0f, /* old: 7 */ .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */ .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, @@ -2732,7 +2696,6 @@ struct tvcard bttv_tvcards[] = { .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, .gpiomute = 0x00c00007, .no_msp34xx = 1, - .no_tda9875 = 1, .no_tda7432 = 1, }, /* ---- card 0x95---------------------------------- */ @@ -2874,7 +2837,6 @@ struct tvcard bttv_tvcards[] = { .pll = PLL_28, .no_msp34xx = 1, .no_tda7432 = 1, - .no_tda9875 = 1, .muxsel_hook = gv800s_muxsel, }, [BTTV_BOARD_GEOVISION_GV800S_SL] = { @@ -2899,7 +2861,6 @@ struct tvcard bttv_tvcards[] = { .pll = PLL_28, .no_msp34xx = 1, .no_tda7432 = 1, - .no_tda9875 = 1, .muxsel_hook = gv800s_muxsel, }, [BTTV_BOARD_PV183] = { diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h index fd62bf15d77..c6333595c6b 100644 --- a/drivers/media/video/bt8xx/bttv.h +++ b/drivers/media/video/bt8xx/bttv.h @@ -234,7 +234,6 @@ struct tvcard { /* i2c audio flags */ unsigned int no_msp34xx:1; - unsigned int no_tda9875:1; unsigned int no_tda7432:1; unsigned int needs_tvaudio:1; unsigned int msp34xx_alt:1; -- cgit v1.2.3-70-g09d2 From 9af39713feb53da96ba23fa94a73ffd0de50a815 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 18 Dec 2010 09:20:59 -0300 Subject: [media] saa7146: Convert from .ioctl to .unlocked_ioctl Convert saa7146 to use core-assisted locking. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/saa7146_core.c | 2 +- drivers/media/common/saa7146_fops.c | 8 ++------ drivers/media/common/saa7146_vbi.c | 2 +- drivers/media/common/saa7146_video.c | 20 +------------------- include/media/saa7146.h | 2 +- 5 files changed, 6 insertions(+), 28 deletions(-) diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c index 982f000a57f..9f47e383c57 100644 --- a/drivers/media/common/saa7146_core.c +++ b/drivers/media/common/saa7146_core.c @@ -452,7 +452,7 @@ static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent INFO(("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x).\n", dev->mem, dev->revision, pci->irq, pci->subsystem_vendor, pci->subsystem_device)); dev->ext = ext; - mutex_init(&dev->lock); + mutex_init(&dev->v4l2_lock); spin_lock_init(&dev->int_slock); spin_lock_init(&dev->slock); diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c index e3fedc60fe7..1bd3dd762c6 100644 --- a/drivers/media/common/saa7146_fops.c +++ b/drivers/media/common/saa7146_fops.c @@ -15,18 +15,15 @@ int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit) } /* is it free? */ - mutex_lock(&dev->lock); if (vv->resources & bit) { DEB_D(("locked! vv->resources:0x%02x, we want:0x%02x\n",vv->resources,bit)); /* no, someone else uses it */ - mutex_unlock(&dev->lock); return 0; } /* it's free, grab it */ fh->resources |= bit; vv->resources |= bit; DEB_D(("res: get 0x%02x, cur:0x%02x\n",bit,vv->resources)); - mutex_unlock(&dev->lock); return 1; } @@ -37,11 +34,9 @@ void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits) BUG_ON((fh->resources & bits) != bits); - mutex_lock(&dev->lock); fh->resources &= ~bits; vv->resources &= ~bits; DEB_D(("res: put 0x%02x, cur:0x%02x\n",bits,vv->resources)); - mutex_unlock(&dev->lock); } @@ -396,7 +391,7 @@ static const struct v4l2_file_operations video_fops = .write = fops_write, .poll = fops_poll, .mmap = fops_mmap, - .ioctl = video_ioctl2, + .unlocked_ioctl = video_ioctl2, }; static void vv_callback(struct saa7146_dev *dev, unsigned long status) @@ -505,6 +500,7 @@ int saa7146_register_device(struct video_device **vid, struct saa7146_dev* dev, vfd->fops = &video_fops; vfd->ioctl_ops = &dev->ext_vv_data->ops; vfd->release = video_device_release; + vfd->lock = &dev->v4l2_lock; vfd->tvnorms = 0; for (i = 0; i < dev->ext_vv_data->num_stds; i++) vfd->tvnorms |= dev->ext_vv_data->stds[i].id; diff --git a/drivers/media/common/saa7146_vbi.c b/drivers/media/common/saa7146_vbi.c index 2d4533ab22b..afe85801d6c 100644 --- a/drivers/media/common/saa7146_vbi.c +++ b/drivers/media/common/saa7146_vbi.c @@ -412,7 +412,7 @@ static int vbi_open(struct saa7146_dev *dev, struct file *file) V4L2_BUF_TYPE_VBI_CAPTURE, V4L2_FIELD_SEQ_TB, // FIXME: does this really work? sizeof(struct saa7146_buf), - file, NULL); + file, &dev->v4l2_lock); init_timer(&fh->vbi_read_timeout); fh->vbi_read_timeout.function = vbi_read_timeout; diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index 0ac5c619aec..9aafa4e969a 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -553,8 +553,6 @@ static int vidioc_s_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *f } } - mutex_lock(&dev->lock); - /* ok, accept it */ vv->ov_fb = *fb; vv->ov_fmt = fmt; @@ -563,8 +561,6 @@ static int vidioc_s_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *f vv->ov_fb.fmt.bytesperline = vv->ov_fb.fmt.width * fmt->depth / 8; DEB_D(("setting bytesperline to %d\n", vv->ov_fb.fmt.bytesperline)); } - - mutex_unlock(&dev->lock); return 0; } @@ -649,8 +645,6 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *c) return -EINVAL; } - mutex_lock(&dev->lock); - switch (ctrl->type) { case V4L2_CTRL_TYPE_BOOLEAN: case V4L2_CTRL_TYPE_MENU: @@ -693,7 +687,6 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *c) /* fixme: we can support changing VFLIP and HFLIP here... */ if (IS_CAPTURE_ACTIVE(fh) != 0) { DEB_D(("V4L2_CID_HFLIP while active capture.\n")); - mutex_unlock(&dev->lock); return -EBUSY; } vv->hflip = c->value; @@ -701,16 +694,13 @@ static int vidioc_s_ctrl(struct file *file, void *fh, struct v4l2_control *c) case V4L2_CID_VFLIP: if (IS_CAPTURE_ACTIVE(fh) != 0) { DEB_D(("V4L2_CID_VFLIP while active capture.\n")); - mutex_unlock(&dev->lock); return -EBUSY; } vv->vflip = c->value; break; default: - mutex_unlock(&dev->lock); return -EINVAL; } - mutex_unlock(&dev->lock); if (IS_OVERLAY_ACTIVE(fh) != 0) { saa7146_stop_preview(fh); @@ -902,22 +892,18 @@ static int vidioc_s_fmt_vid_overlay(struct file *file, void *__fh, struct v4l2_f err = vidioc_try_fmt_vid_overlay(file, fh, f); if (0 != err) return err; - mutex_lock(&dev->lock); fh->ov.win = f->fmt.win; fh->ov.nclips = f->fmt.win.clipcount; if (fh->ov.nclips > 16) fh->ov.nclips = 16; if (copy_from_user(fh->ov.clips, f->fmt.win.clips, sizeof(struct v4l2_clip) * fh->ov.nclips)) { - mutex_unlock(&dev->lock); return -EFAULT; } /* fh->ov.fh is used to indicate that we have valid overlay informations, too */ fh->ov.fh = fh; - mutex_unlock(&dev->lock); - /* check if our current overlay is active */ if (IS_OVERLAY_ACTIVE(fh) != 0) { saa7146_stop_preview(fh); @@ -976,8 +962,6 @@ static int vidioc_s_std(struct file *file, void *fh, v4l2_std_id *id) } } - mutex_lock(&dev->lock); - for (i = 0; i < dev->ext_vv_data->num_stds; i++) if (*id & dev->ext_vv_data->stds[i].id) break; @@ -988,8 +972,6 @@ static int vidioc_s_std(struct file *file, void *fh, v4l2_std_id *id) found = 1; } - mutex_unlock(&dev->lock); - if (vv->ov_suspend != NULL) { saa7146_start_preview(vv->ov_suspend); vv->ov_suspend = NULL; @@ -1354,7 +1336,7 @@ static int video_open(struct saa7146_dev *dev, struct file *file) V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_INTERLACED, sizeof(struct saa7146_buf), - file, NULL); + file, &dev->v4l2_lock); return 0; } diff --git a/include/media/saa7146.h b/include/media/saa7146.h index ac7ce00f39c..79827143d5a 100644 --- a/include/media/saa7146.h +++ b/include/media/saa7146.h @@ -115,7 +115,7 @@ struct saa7146_dev /* different device locks */ spinlock_t slock; - struct mutex lock; + struct mutex v4l2_lock; unsigned char __iomem *mem; /* pointer to mapped IO memory */ u32 revision; /* chip revision; needed for bug-workarounds*/ -- cgit v1.2.3-70-g09d2 From d2db8fee0d77f43f64e4e97ccc1558a9f59fab41 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 18 Dec 2010 09:50:43 -0300 Subject: [media] cpia2: convert .ioctl to .unlocked_ioctl Implement core-assisted locking in cpia2. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cpia2/cpia2.h | 2 +- drivers/media/video/cpia2/cpia2_core.c | 65 +++++---------------- drivers/media/video/cpia2/cpia2_v4l.c | 104 +++++++++++---------------------- 3 files changed, 50 insertions(+), 121 deletions(-) diff --git a/drivers/media/video/cpia2/cpia2.h b/drivers/media/video/cpia2/cpia2.h index 916c13d5cf7..6d6d1843791 100644 --- a/drivers/media/video/cpia2/cpia2.h +++ b/drivers/media/video/cpia2/cpia2.h @@ -378,7 +378,7 @@ struct cpia2_fh { struct camera_data { /* locks */ - struct mutex busy_lock; /* guard against SMP multithreading */ + struct mutex v4l2_lock; /* serialize file operations */ struct v4l2_prio_state prio; /* camera status */ diff --git a/drivers/media/video/cpia2/cpia2_core.c b/drivers/media/video/cpia2/cpia2_core.c index 9606bc01b80..aaffca8e13f 100644 --- a/drivers/media/video/cpia2/cpia2_core.c +++ b/drivers/media/video/cpia2/cpia2_core.c @@ -2247,7 +2247,7 @@ struct camera_data *cpia2_init_camera_struct(void) cam->present = 1; - mutex_init(&cam->busy_lock); + mutex_init(&cam->v4l2_lock); init_waitqueue_head(&cam->wq_stream); return cam; @@ -2365,9 +2365,9 @@ long cpia2_read(struct camera_data *cam, char __user *buf, unsigned long count, int noblock) { struct framebuf *frame; - if (!count) { + + if (!count) return 0; - } if (!buf) { ERR("%s: buffer NULL\n",__func__); @@ -2379,17 +2379,12 @@ long cpia2_read(struct camera_data *cam, return -EINVAL; } - /* make this _really_ smp and multithread-safe */ - if (mutex_lock_interruptible(&cam->busy_lock)) - return -ERESTARTSYS; - if (!cam->present) { LOG("%s: camera removed\n",__func__); - mutex_unlock(&cam->busy_lock); return 0; /* EOF */ } - if(!cam->streaming) { + if (!cam->streaming) { /* Start streaming */ cpia2_usb_stream_start(cam, cam->params.camera_state.stream_mode); @@ -2398,42 +2393,31 @@ long cpia2_read(struct camera_data *cam, /* Copy cam->curbuff in case it changes while we're processing */ frame = cam->curbuff; if (noblock && frame->status != FRAME_READY) { - mutex_unlock(&cam->busy_lock); return -EAGAIN; } - if(frame->status != FRAME_READY) { - mutex_unlock(&cam->busy_lock); + if (frame->status != FRAME_READY) { + mutex_unlock(&cam->v4l2_lock); wait_event_interruptible(cam->wq_stream, !cam->present || (frame = cam->curbuff)->status == FRAME_READY); + mutex_lock(&cam->v4l2_lock); if (signal_pending(current)) return -ERESTARTSYS; - /* make this _really_ smp and multithread-safe */ - if (mutex_lock_interruptible(&cam->busy_lock)) { - return -ERESTARTSYS; - } - if(!cam->present) { - mutex_unlock(&cam->busy_lock); + if (!cam->present) return 0; - } } /* copy data to user space */ - if (frame->length > count) { - mutex_unlock(&cam->busy_lock); + if (frame->length > count) return -EFAULT; - } - if (copy_to_user(buf, frame->data, frame->length)) { - mutex_unlock(&cam->busy_lock); + if (copy_to_user(buf, frame->data, frame->length)) return -EFAULT; - } count = frame->length; frame->status = FRAME_EMPTY; - mutex_unlock(&cam->busy_lock); return count; } @@ -2447,17 +2431,13 @@ unsigned int cpia2_poll(struct camera_data *cam, struct file *filp, { unsigned int status=0; - if(!cam) { + if (!cam) { ERR("%s: Internal error, camera_data not found!\n",__func__); return POLLERR; } - mutex_lock(&cam->busy_lock); - - if(!cam->present) { - mutex_unlock(&cam->busy_lock); + if (!cam->present) return POLLHUP; - } if(!cam->streaming) { /* Start streaming */ @@ -2465,16 +2445,13 @@ unsigned int cpia2_poll(struct camera_data *cam, struct file *filp, cam->params.camera_state.stream_mode); } - mutex_unlock(&cam->busy_lock); poll_wait(filp, &cam->wq_stream, wait); - mutex_lock(&cam->busy_lock); if(!cam->present) status = POLLHUP; else if(cam->curbuff->status == FRAME_READY) status = POLLIN | POLLRDNORM; - mutex_unlock(&cam->busy_lock); return status; } @@ -2496,29 +2473,19 @@ int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma) DBG("mmap offset:%ld size:%ld\n", start_offset, size); - /* make this _really_ smp-safe */ - if (mutex_lock_interruptible(&cam->busy_lock)) - return -ERESTARTSYS; - - if (!cam->present) { - mutex_unlock(&cam->busy_lock); + if (!cam->present) return -ENODEV; - } if (size > cam->frame_size*cam->num_frames || (start_offset % cam->frame_size) != 0 || - (start_offset+size > cam->frame_size*cam->num_frames)) { - mutex_unlock(&cam->busy_lock); + (start_offset+size > cam->frame_size*cam->num_frames)) return -EINVAL; - } pos = ((unsigned long) (cam->frame_buffer)) + start_offset; while (size > 0) { page = kvirt_to_pa(pos); - if (remap_pfn_range(vma, start, page >> PAGE_SHIFT, PAGE_SIZE, PAGE_SHARED)) { - mutex_unlock(&cam->busy_lock); + if (remap_pfn_range(vma, start, page >> PAGE_SHIFT, PAGE_SIZE, PAGE_SHARED)) return -EAGAIN; - } start += PAGE_SIZE; pos += PAGE_SIZE; if (size > PAGE_SIZE) @@ -2528,7 +2495,5 @@ int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma) } cam->mmapped = true; - mutex_unlock(&cam->busy_lock); return 0; } - diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c index 7edf80b0d01..9bad3984293 100644 --- a/drivers/media/video/cpia2/cpia2_v4l.c +++ b/drivers/media/video/cpia2/cpia2_v4l.c @@ -238,59 +238,40 @@ static struct v4l2_queryctrl controls[] = { static int cpia2_open(struct file *file) { struct camera_data *cam = video_drvdata(file); - int retval = 0; + struct cpia2_fh *fh; if (!cam) { ERR("Internal error, camera_data not found!\n"); return -ENODEV; } - if(mutex_lock_interruptible(&cam->busy_lock)) - return -ERESTARTSYS; - - if(!cam->present) { - retval = -ENODEV; - goto err_return; - } + if (!cam->present) + return -ENODEV; - if (cam->open_count > 0) { - goto skip_init; - } + if (cam->open_count == 0) { + if (cpia2_allocate_buffers(cam)) + return -ENOMEM; - if (cpia2_allocate_buffers(cam)) { - retval = -ENOMEM; - goto err_return; - } + /* reset the camera */ + if (cpia2_reset_camera(cam) < 0) + return -EIO; - /* reset the camera */ - if (cpia2_reset_camera(cam) < 0) { - retval = -EIO; - goto err_return; + cam->APP_len = 0; + cam->COM_len = 0; } - cam->APP_len = 0; - cam->COM_len = 0; - -skip_init: - { - struct cpia2_fh *fh = kmalloc(sizeof(*fh),GFP_KERNEL); - if(!fh) { - retval = -ENOMEM; - goto err_return; - } - file->private_data = fh; - fh->prio = V4L2_PRIORITY_UNSET; - v4l2_prio_open(&cam->prio, &fh->prio); - fh->mmapped = 0; - } + fh = kmalloc(sizeof(*fh), GFP_KERNEL); + if (!fh) + return -ENOMEM; + file->private_data = fh; + fh->prio = V4L2_PRIORITY_UNSET; + v4l2_prio_open(&cam->prio, &fh->prio); + fh->mmapped = 0; ++cam->open_count; cpia2_dbg_dump_registers(cam); - -err_return: - mutex_unlock(&cam->busy_lock); - return retval; + return 0; } /****************************************************************************** @@ -304,15 +285,11 @@ static int cpia2_close(struct file *file) struct camera_data *cam = video_get_drvdata(dev); struct cpia2_fh *fh = file->private_data; - mutex_lock(&cam->busy_lock); - if (cam->present && - (cam->open_count == 1 - || fh->prio == V4L2_PRIORITY_RECORD - )) { + (cam->open_count == 1 || fh->prio == V4L2_PRIORITY_RECORD)) { cpia2_usb_stream_stop(cam); - if(cam->open_count == 1) { + if (cam->open_count == 1) { /* save camera state for later open */ cpia2_save_camera_state(cam); @@ -321,26 +298,21 @@ static int cpia2_close(struct file *file) } } - { - if(fh->mmapped) - cam->mmapped = 0; - v4l2_prio_close(&cam->prio, fh->prio); - file->private_data = NULL; - kfree(fh); - } + if (fh->mmapped) + cam->mmapped = 0; + v4l2_prio_close(&cam->prio, fh->prio); + file->private_data = NULL; + kfree(fh); if (--cam->open_count == 0) { cpia2_free_buffers(cam); if (!cam->present) { video_unregister_device(dev); - mutex_unlock(&cam->busy_lock); kfree(cam); return 0; } } - mutex_unlock(&cam->busy_lock); - return 0; } @@ -405,11 +377,11 @@ static int sync(struct camera_data *cam, int frame_nr) return 0; } - mutex_unlock(&cam->busy_lock); + mutex_unlock(&cam->v4l2_lock); wait_event_interruptible(cam->wq_stream, !cam->streaming || frame->status == FRAME_READY); - mutex_lock(&cam->busy_lock); + mutex_lock(&cam->v4l2_lock); if (signal_pending(current)) return -ERESTARTSYS; if(!cam->present) @@ -1293,11 +1265,11 @@ static int ioctl_dqbuf(void *arg,struct camera_data *cam, struct file *file) if(frame < 0) { /* Wait for a frame to become available */ struct framebuf *cb=cam->curbuff; - mutex_unlock(&cam->busy_lock); + mutex_unlock(&cam->v4l2_lock); wait_event_interruptible(cam->wq_stream, !cam->present || (cb=cam->curbuff)->status == FRAME_READY); - mutex_lock(&cam->busy_lock); + mutex_lock(&cam->v4l2_lock); if (signal_pending(current)) return -ERESTARTSYS; if(!cam->present) @@ -1337,14 +1309,8 @@ static long cpia2_do_ioctl(struct file *file, unsigned int cmd, void *arg) if (!cam) return -ENOTTY; - /* make this _really_ smp-safe */ - if (mutex_lock_interruptible(&cam->busy_lock)) - return -ERESTARTSYS; - - if (!cam->present) { - mutex_unlock(&cam->busy_lock); + if (!cam->present) return -ENODEV; - } /* Priority check */ switch (cmd) { @@ -1352,10 +1318,8 @@ static long cpia2_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct cpia2_fh *fh = file->private_data; retval = v4l2_prio_check(&cam->prio, fh->prio); - if(retval) { - mutex_unlock(&cam->busy_lock); + if (retval) return retval; - } break; } default: @@ -1529,7 +1493,6 @@ static long cpia2_do_ioctl(struct file *file, unsigned int cmd, void *arg) break; } - mutex_unlock(&cam->busy_lock); return retval; } @@ -1596,7 +1559,7 @@ static const struct v4l2_file_operations cpia2_fops = { .release = cpia2_close, .read = cpia2_v4l_read, .poll = cpia2_v4l_poll, - .ioctl = cpia2_ioctl, + .unlocked_ioctl = cpia2_ioctl, .mmap = cpia2_mmap, }; @@ -1620,6 +1583,7 @@ int cpia2_register_camera(struct camera_data *cam) memcpy(cam->vdev, &cpia2_template, sizeof(cpia2_template)); video_set_drvdata(cam->vdev, cam); + cam->vdev->lock = &cam->v4l2_lock; reset_camera_struct_v4l(cam); -- cgit v1.2.3-70-g09d2 From 7036d6a73c88428764e4a12f30846279346f4382 Mon Sep 17 00:00:00 2001 From: Mats Randgaard Date: Thu, 16 Dec 2010 12:17:41 -0300 Subject: [media] vpif_cap/disp: Add debug functionality The following functions are added to the drivers: - vpif_g_chip_ident - vpif_dbg_g_register - vpif_dbg_s_register - vpif_log_status Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Acked-by: Vaibhav Hiremath Acked-by: Manjunath Hadli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif_capture.c | 83 ++++++++++++++++++++++++++++ drivers/media/video/davinci/vpif_display.c | 86 ++++++++++++++++++++++++++++++ 2 files changed, 169 insertions(+) diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c index 193abab6b35..9446dbc476f 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/video/davinci/vpif_capture.c @@ -37,6 +37,7 @@ #include #include #include +#include #include "vpif_capture.h" #include "vpif.h" @@ -1807,6 +1808,82 @@ static int vpif_cropcap(struct file *file, void *priv, return 0; } +/* + * vpif_g_chip_ident() - Identify the chip + * @file: file ptr + * @priv: file handle + * @chip: chip identity + * + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) { + vpif_dbg(2, debug, "match_type is invalid.\n"); + return -EINVAL; + } + + return v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 0, core, + g_chip_ident, chip); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +/* + * vpif_dbg_g_register() - Read register + * @file: file ptr + * @priv: file handle + * @reg: register to be read + * + * Debugging only + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_dbg_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg){ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], core, + g_register, reg); +} + +/* + * vpif_dbg_s_register() - Write to register + * @file: file ptr + * @priv: file handle + * @reg: register to be modified + * + * Debugging only + * Returns zero or -EINVAL if write operations fails. + */ +static int vpif_dbg_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg){ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], core, + s_register, reg); +} +#endif + +/* + * vpif_log_status() - Status information + * @file: file ptr + * @priv: file handle + * + * Returns zero. + */ +static int vpif_log_status(struct file *filep, void *priv) +{ + /* status for sub devices */ + v4l2_device_call_all(&vpif_obj.v4l2_dev, 0, core, log_status); + + return 0; +} + /* vpif capture ioctl operations */ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_querycap = vpif_querycap, @@ -1829,6 +1906,12 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_streamon = vpif_streamon, .vidioc_streamoff = vpif_streamoff, .vidioc_cropcap = vpif_cropcap, + .vidioc_g_chip_ident = vpif_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vpif_dbg_g_register, + .vidioc_s_register = vpif_dbg_s_register, +#endif + .vidioc_log_status = vpif_log_status, }; /* vpif file operations */ diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 412c65d54fe..2d55e3e86a8 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -38,6 +38,7 @@ #include #include #include +#include #include @@ -1315,6 +1316,85 @@ static int vpif_s_priority(struct file *file, void *priv, enum v4l2_priority p) return v4l2_prio_change(&ch->prio, &fh->prio, p); } + +/* + * vpif_g_chip_ident() - Identify the chip + * @file: file ptr + * @priv: file handle + * @chip: chip identity + * + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_g_chip_ident(struct file *file, void *priv, + struct v4l2_dbg_chip_ident *chip) +{ + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + if (chip->match.type != V4L2_CHIP_MATCH_I2C_DRIVER && + chip->match.type != V4L2_CHIP_MATCH_I2C_ADDR) { + vpif_dbg(2, debug, "match_type is invalid.\n"); + return -EINVAL; + } + + return v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 0, core, + g_chip_ident, chip); +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +/* + * vpif_dbg_g_register() - Read register + * @file: file ptr + * @priv: file handle + * @reg: register to be read + * + * Debugging only + * Returns zero or -EINVAL if read operations fails. + */ +static int vpif_dbg_g_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg){ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + + return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], core, + g_register, reg); +} + +/* + * vpif_dbg_s_register() - Write to register + * @file: file ptr + * @priv: file handle + * @reg: register to be modified + * + * Debugging only + * Returns zero or -EINVAL if write operations fails. + */ +static int vpif_dbg_s_register(struct file *file, void *priv, + struct v4l2_dbg_register *reg){ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + + return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], core, + s_register, reg); +} +#endif + +/* + * vpif_log_status() - Status information + * @file: file ptr + * @priv: file handle + * + * Returns zero. + */ +static int vpif_log_status(struct file *filep, void *priv) +{ + /* status for sub devices */ + v4l2_device_call_all(&vpif_obj.v4l2_dev, 0, core, log_status); + + return 0; +} + /* vpif display ioctl operations */ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_querycap = vpif_querycap, @@ -1336,6 +1416,12 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_s_output = vpif_s_output, .vidioc_g_output = vpif_g_output, .vidioc_cropcap = vpif_cropcap, + .vidioc_g_chip_ident = vpif_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = vpif_dbg_g_register, + .vidioc_s_register = vpif_dbg_s_register, +#endif + .vidioc_log_status = vpif_log_status, }; static const struct v4l2_file_operations vpif_fops = { -- cgit v1.2.3-70-g09d2 From aa4444063505983c5971bc8fb832385dfba16b41 Mon Sep 17 00:00:00 2001 From: Mats Randgaard Date: Thu, 16 Dec 2010 12:17:42 -0300 Subject: [media] vpif: Consolidate formats from capture and display - The ch_params tables in vpif_capture.c and vpif_display.c are moved to a common table in vpif.c. Then it is easier to maintain the table. - The field "fps" is removed from the struct vpif_channel_config_params because it is not used. Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Acked-by : Murali Karicheri Acked-by: Manjunath Hadli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif.c | 50 ++++++++++++++++++++++++++++++ drivers/media/video/davinci/vpif.h | 4 ++- drivers/media/video/davinci/vpif_capture.c | 18 ++--------- drivers/media/video/davinci/vpif_display.c | 17 ++-------- 4 files changed, 58 insertions(+), 31 deletions(-) diff --git a/drivers/media/video/davinci/vpif.c b/drivers/media/video/davinci/vpif.c index 1f532e31cd4..54cc0dadd75 100644 --- a/drivers/media/video/davinci/vpif.c +++ b/drivers/media/video/davinci/vpif.c @@ -41,6 +41,56 @@ spinlock_t vpif_lock; void __iomem *vpif_base; +/** + * ch_params: video standard configuration parameters for vpif + * The table must include all presets from supported subdevices. + */ +const struct vpif_channel_config_params ch_params[] = { + /* SDTV formats */ + { + .name = "NTSC_M", + .width = 720, + .height = 480, + .frm_fmt = 0, + .ycmux_mode = 1, + .eav2sav = 268, + .sav2eav = 1440, + .l1 = 1, + .l3 = 23, + .l5 = 263, + .l7 = 266, + .l9 = 286, + .l11 = 525, + .vsize = 525, + .capture_format = 0, + .vbi_supported = 1, + .hd_sd = 0, + .stdid = V4L2_STD_525_60, + }, + { + .name = "PAL_BDGHIK", + .width = 720, + .height = 576, + .frm_fmt = 0, + .ycmux_mode = 1, + .eav2sav = 280, + .sav2eav = 1440, + .l1 = 1, + .l3 = 23, + .l5 = 311, + .l7 = 313, + .l9 = 336, + .l11 = 624, + .vsize = 625, + .capture_format = 0, + .vbi_supported = 1, + .hd_sd = 0, + .stdid = V4L2_STD_625_50, + }, +}; + +const unsigned int vpif_ch_params_count = ARRAY_SIZE(ch_params); + static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val) { if (val) diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h index ebd5c4338eb..d14e36e5c90 100644 --- a/drivers/media/video/davinci/vpif.h +++ b/drivers/media/video/davinci/vpif.h @@ -577,7 +577,6 @@ struct vpif_channel_config_params { char name[VPIF_MAX_NAME]; /* Name of the mode */ u16 width; /* Indicates width of the image */ u16 height; /* Indicates height of the image */ - u8 fps; u8 frm_fmt; /* Indicates whether this is interlaced * or progressive format */ u8 ycmux_mode; /* Indicates whether this mode requires @@ -594,6 +593,9 @@ struct vpif_channel_config_params { v4l2_std_id stdid; }; +extern const unsigned int vpif_ch_params_count; +extern const struct vpif_channel_config_params ch_params[]; + struct vpif_video_params; struct vpif_params; struct vpif_vbi_params; diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c index 9446dbc476f..0a7ebb0e151 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/video/davinci/vpif_capture.c @@ -81,20 +81,6 @@ static struct vpif_config_params config_params = { static struct vpif_device vpif_obj = { {NULL} }; static struct device *vpif_dev; -/** - * ch_params: video standard configuration parameters for vpif - */ -static const struct vpif_channel_config_params ch_params[] = { - { - "NTSC_M", 720, 480, 30, 0, 1, 268, 1440, 1, 23, 263, 266, - 286, 525, 525, 0, 1, 0, V4L2_STD_525_60, - }, - { - "PAL_BDGHIK", 720, 576, 25, 0, 1, 280, 1440, 1, 23, 311, 313, - 336, 624, 625, 0, 1, 0, V4L2_STD_625_50, - }, -}; - /** * vpif_uservirt_to_phys : translate user/virtual address to phy address * @virtp: user/virtual address @@ -444,7 +430,7 @@ static int vpif_update_std_info(struct channel_obj *ch) std_info = &vpifparams->std_info; - for (index = 0; index < ARRAY_SIZE(ch_params); index++) { + for (index = 0; index < vpif_ch_params_count; index++) { config = &ch_params[index]; if (config->stdid & vid_ch->stdid) { memcpy(std_info, config, sizeof(*config)); @@ -453,7 +439,7 @@ static int vpif_update_std_info(struct channel_obj *ch) } /* standard not found */ - if (index == ARRAY_SIZE(ch_params)) + if (index == vpif_ch_params_count) return -EINVAL; common->fmt.fmt.pix.width = std_info->width; diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 2d55e3e86a8..9de0062eca5 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -85,17 +85,6 @@ static struct vpif_config_params config_params = { static struct vpif_device vpif_obj = { {NULL} }; static struct device *vpif_dev; -static const struct vpif_channel_config_params ch_params[] = { - { - "NTSC", 720, 480, 30, 0, 1, 268, 1440, 1, 23, 263, 266, - 286, 525, 525, 0, 1, 0, V4L2_STD_525_60, - }, - { - "PAL", 720, 576, 25, 0, 1, 280, 1440, 1, 23, 311, 313, - 336, 624, 625, 0, 1, 0, V4L2_STD_625_50, - }, -}; - /* * vpif_uservirt_to_phys: This function is used to convert user * space virtual address to physical address. @@ -388,7 +377,7 @@ static int vpif_get_std_info(struct channel_obj *ch) if (!std_info->stdid) return -1; - for (index = 0; index < ARRAY_SIZE(ch_params); index++) { + for (index = 0; index < vpif_ch_params_count; index++) { config = &ch_params[index]; if (config->stdid & std_info->stdid) { memcpy(std_info, config, sizeof(*config)); @@ -396,8 +385,8 @@ static int vpif_get_std_info(struct channel_obj *ch) } } - if (index == ARRAY_SIZE(ch_params)) - return -1; + if (index == vpif_ch_params_count) + return -EINVAL; common->fmt.fmt.pix.width = std_info->width; common->fmt.fmt.pix.height = std_info->height; -- cgit v1.2.3-70-g09d2 From 40c8bcea6bc594c50abf3d3867bd49c8c039eb21 Mon Sep 17 00:00:00 2001 From: Mats Randgaard Date: Thu, 16 Dec 2010 12:17:43 -0300 Subject: [media] vpif_cap/disp: Add support for DV presets - Added functions to set/get/query/enum DV presets for vpif_caputre and vpif_display. - The format specification table is extended with all the DV formats supported by TVP7002. Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Acked-by: Manjunath Hadli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif.c | 127 +++++++++++++++++++++++++++++ drivers/media/video/davinci/vpif.h | 1 + drivers/media/video/davinci/vpif_capture.c | 124 +++++++++++++++++++++++++++- drivers/media/video/davinci/vpif_capture.h | 1 + drivers/media/video/davinci/vpif_display.c | 105 ++++++++++++++++++++++-- drivers/media/video/davinci/vpif_display.h | 1 + 6 files changed, 350 insertions(+), 9 deletions(-) diff --git a/drivers/media/video/davinci/vpif.c b/drivers/media/video/davinci/vpif.c index 54cc0dadd75..9f3bfc1eb24 100644 --- a/drivers/media/video/davinci/vpif.c +++ b/drivers/media/video/davinci/vpif.c @@ -46,6 +46,133 @@ void __iomem *vpif_base; * The table must include all presets from supported subdevices. */ const struct vpif_channel_config_params ch_params[] = { + /* HDTV formats */ + { + .name = "480p59_94", + .width = 720, + .height = 480, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 138-8, + .sav2eav = 720, + .l1 = 1, + .l3 = 43, + .l5 = 523, + .vsize = 525, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_480P59_94, + }, + { + .name = "576p50", + .width = 720, + .height = 576, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 144-8, + .sav2eav = 720, + .l1 = 1, + .l3 = 45, + .l5 = 621, + .vsize = 625, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_576P50, + }, + { + .name = "720p50", + .width = 1280, + .height = 720, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 700-8, + .sav2eav = 1280, + .l1 = 1, + .l3 = 26, + .l5 = 746, + .vsize = 750, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_720P50, + }, + { + .name = "720p60", + .width = 1280, + .height = 720, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 370 - 8, + .sav2eav = 1280, + .l1 = 1, + .l3 = 26, + .l5 = 746, + .vsize = 750, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_720P60, + }, + { + .name = "1080I50", + .width = 1920, + .height = 1080, + .frm_fmt = 0, + .ycmux_mode = 0, + .eav2sav = 720 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 21, + .l5 = 561, + .l7 = 563, + .l9 = 584, + .l11 = 1124, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_1080I50, + }, + { + .name = "1080I60", + .width = 1920, + .height = 1080, + .frm_fmt = 0, + .ycmux_mode = 0, + .eav2sav = 280 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 21, + .l5 = 561, + .l7 = 563, + .l9 = 584, + .l11 = 1124, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_1080I60, + }, + { + .name = "1080p60", + .width = 1920, + .height = 1080, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 280 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 42, + .l5 = 1122, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_1080P60, + }, + /* SDTV formats */ { .name = "NTSC_M", diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h index d14e36e5c90..b6695bee3c5 100644 --- a/drivers/media/video/davinci/vpif.h +++ b/drivers/media/video/davinci/vpif.h @@ -591,6 +591,7 @@ struct vpif_channel_config_params { * supports capturing vbi or not */ u8 hd_sd; v4l2_std_id stdid; + u32 dv_preset; /* HDTV format */ }; extern const unsigned int vpif_ch_params_count; diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c index 0a7ebb0e151..42f1cd60780 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/video/davinci/vpif_capture.c @@ -432,9 +432,18 @@ static int vpif_update_std_info(struct channel_obj *ch) for (index = 0; index < vpif_ch_params_count; index++) { config = &ch_params[index]; - if (config->stdid & vid_ch->stdid) { - memcpy(std_info, config, sizeof(*config)); - break; + if (config->hd_sd == 0) { + vpif_dbg(2, debug, "SD format\n"); + if (config->stdid & vid_ch->stdid) { + memcpy(std_info, config, sizeof(*config)); + break; + } + } else { + vpif_dbg(2, debug, "HD format\n"); + if (config->dv_preset == vid_ch->dv_preset) { + memcpy(std_info, config, sizeof(*config)); + break; + } } } @@ -1442,6 +1451,7 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) return -ERESTARTSYS; ch->video.stdid = *std_id; + ch->video.dv_preset = V4L2_DV_INVALID; /* Get the information about the standard */ if (vpif_update_std_info(ch)) { @@ -1794,6 +1804,110 @@ static int vpif_cropcap(struct file *file, void *priv, return 0; } +/** + * vpif_enum_dv_presets() - ENUM_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_enum_dv_presets(struct file *file, void *priv, + struct v4l2_dv_enum_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], + video, enum_dv_presets, preset); +} + +/** + * vpif_query_dv_presets() - QUERY_DV_PRESET handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_query_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + return v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], + video, query_dv_preset, preset); +} +/** + * vpif_s_dv_presets() - S_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_s_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; + + if (common->started) { + vpif_dbg(1, debug, "streaming in progress\n"); + return -EBUSY; + } + + if ((VPIF_CHANNEL0_VIDEO == ch->channel_id) || + (VPIF_CHANNEL1_VIDEO == ch->channel_id)) { + if (!fh->initialized) { + vpif_dbg(1, debug, "Channel Busy\n"); + return -EBUSY; + } + } + + ret = v4l2_prio_check(&ch->prio, fh->prio); + if (ret) + return ret; + + fh->initialized = 1; + + /* Call encoder subdevice function to set the standard */ + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + + ch->video.dv_preset = preset->preset; + ch->video.stdid = V4L2_STD_UNKNOWN; + + /* Get the information about the standard */ + if (vpif_update_std_info(ch)) { + vpif_dbg(1, debug, "Error getting the standard info\n"); + ret = -EINVAL; + } else { + /* Configure the default format information */ + vpif_config_format(ch); + + ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], + video, s_dv_preset, preset); + } + + mutex_unlock(&common->lock); + + return ret; +} +/** + * vpif_g_dv_presets() - G_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_g_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + preset->preset = ch->video.dv_preset; + + return 0; +} + /* * vpif_g_chip_ident() - Identify the chip * @file: file ptr @@ -1892,6 +2006,10 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_streamon = vpif_streamon, .vidioc_streamoff = vpif_streamoff, .vidioc_cropcap = vpif_cropcap, + .vidioc_enum_dv_presets = vpif_enum_dv_presets, + .vidioc_s_dv_preset = vpif_s_dv_preset, + .vidioc_g_dv_preset = vpif_g_dv_preset, + .vidioc_query_dv_preset = vpif_query_dv_preset, .vidioc_g_chip_ident = vpif_g_chip_ident, #ifdef CONFIG_VIDEO_ADV_DEBUG .vidioc_g_register = vpif_dbg_g_register, diff --git a/drivers/media/video/davinci/vpif_capture.h b/drivers/media/video/davinci/vpif_capture.h index 4e12ec8cac6..3452a8aec02 100644 --- a/drivers/media/video/davinci/vpif_capture.h +++ b/drivers/media/video/davinci/vpif_capture.h @@ -59,6 +59,7 @@ struct video_obj { enum v4l2_field buf_field; /* Currently selected or default standard */ v4l2_std_id stdid; + u32 dv_preset; /* This is to track the last input that is passed to application */ u32 input_idx; }; diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 9de0062eca5..759c5e855ac 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -373,15 +373,23 @@ static int vpif_get_std_info(struct channel_obj *ch) int index; - std_info->stdid = vid_ch->stdid; - if (!std_info->stdid) - return -1; + if (!vid_ch->stdid && !vid_ch->dv_preset) + return -EINVAL; for (index = 0; index < vpif_ch_params_count; index++) { config = &ch_params[index]; - if (config->stdid & std_info->stdid) { - memcpy(std_info, config, sizeof(*config)); - break; + if (config->hd_sd == 0) { + vpif_dbg(2, debug, "SD format\n"); + if (config->stdid & vid_ch->stdid) { + memcpy(std_info, config, sizeof(*config)); + break; + } + } else { + vpif_dbg(2, debug, "HD format\n"); + if (config->dv_preset == vid_ch->dv_preset) { + memcpy(std_info, config, sizeof(*config)); + break; + } } } @@ -1305,6 +1313,88 @@ static int vpif_s_priority(struct file *file, void *priv, enum v4l2_priority p) return v4l2_prio_change(&ch->prio, &fh->prio, p); } +/** + * vpif_enum_dv_presets() - ENUM_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_enum_dv_presets(struct file *file, void *priv, + struct v4l2_dv_enum_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + + return v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], + video, enum_dv_presets, preset); +} + +/** + * vpif_s_dv_presets() - S_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_s_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct video_obj *vid_ch = &ch->video; + int ret = 0; + + if (common->started) { + vpif_dbg(1, debug, "streaming in progress\n"); + return -EBUSY; + } + + ret = v4l2_prio_check(&ch->prio, fh->prio); + if (ret != 0) + return ret; + + fh->initialized = 1; + + /* Call encoder subdevice function to set the standard */ + if (mutex_lock_interruptible(&common->lock)) + return -ERESTARTSYS; + + ch->video.dv_preset = preset->preset; + ch->video.stdid = V4L2_STD_UNKNOWN; + + /* Get the information about the standard */ + if (vpif_get_std_info(ch)) { + ret = -EINVAL; + vpif_dbg(1, debug, "Error getting the standard info\n"); + } else { + /* Configure the default format information */ + vpif_config_format(ch); + + ret = v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], + video, s_dv_preset, preset); + } + + mutex_unlock(&common->lock); + + return ret; +} +/** + * vpif_g_dv_presets() - G_DV_PRESETS handler + * @file: file ptr + * @priv: file handle + * @preset: input preset + */ +static int vpif_g_dv_preset(struct file *file, void *priv, + struct v4l2_dv_preset *preset) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + + preset->preset = ch->video.dv_preset; + + return 0; +} /* * vpif_g_chip_ident() - Identify the chip @@ -1405,6 +1495,9 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_s_output = vpif_s_output, .vidioc_g_output = vpif_g_output, .vidioc_cropcap = vpif_cropcap, + .vidioc_enum_dv_presets = vpif_enum_dv_presets, + .vidioc_s_dv_preset = vpif_s_dv_preset, + .vidioc_g_dv_preset = vpif_g_dv_preset, .vidioc_g_chip_ident = vpif_g_chip_ident, #ifdef CONFIG_VIDEO_ADV_DEBUG .vidioc_g_register = vpif_dbg_g_register, diff --git a/drivers/media/video/davinci/vpif_display.h b/drivers/media/video/davinci/vpif_display.h index a2a7cd166bb..3d56b3e356a 100644 --- a/drivers/media/video/davinci/vpif_display.h +++ b/drivers/media/video/davinci/vpif_display.h @@ -67,6 +67,7 @@ struct video_obj { * most recent displayed frame only */ v4l2_std_id stdid; /* Currently selected or default * standard */ + u32 dv_preset; u32 output_id; /* Current output id */ }; -- cgit v1.2.3-70-g09d2 From c027e165d2d901ecab485da5fee72ddce5da0297 Mon Sep 17 00:00:00 2001 From: Mats Randgaard Date: Thu, 16 Dec 2010 12:17:44 -0300 Subject: [media] vpif_cap/disp: Added support for DV timings Added functions to set and get custom DV timings. Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Acked-by: Vaibhav Hiremath Acked-by: Manjunath Hadli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif_capture.c | 123 +++++++++++++++++++ drivers/media/video/davinci/vpif_capture.h | 1 + drivers/media/video/davinci/vpif_display.c | 190 +++++++++++++++++++++++++---- drivers/media/video/davinci/vpif_display.h | 1 + 4 files changed, 290 insertions(+), 25 deletions(-) diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c index 42f1cd60780..be2b9919937 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/video/davinci/vpif_capture.c @@ -1452,6 +1452,7 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) ch->video.stdid = *std_id; ch->video.dv_preset = V4L2_DV_INVALID; + memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); /* Get the information about the standard */ if (vpif_update_std_info(ch)) { @@ -1874,6 +1875,7 @@ static int vpif_s_dv_preset(struct file *file, void *priv, ch->video.dv_preset = preset->preset; ch->video.stdid = V4L2_STD_UNKNOWN; + memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); /* Get the information about the standard */ if (vpif_update_std_info(ch)) { @@ -1908,6 +1910,125 @@ static int vpif_g_dv_preset(struct file *file, void *priv, return 0; } +/** + * vpif_s_dv_timings() - S_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_s_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + struct video_obj *vid_ch = &ch->video; + struct v4l2_bt_timings *bt = &vid_ch->bt_timings; + int ret; + + if (timings->type != V4L2_DV_BT_656_1120) { + vpif_dbg(2, debug, "Timing type not defined\n"); + return -EINVAL; + } + + /* Configure subdevice timings, if any */ + ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], + video, s_dv_timings, timings); + if (ret == -ENOIOCTLCMD) { + vpif_dbg(2, debug, "Custom DV timings not supported by " + "subdevice\n"); + return -EINVAL; + } + if (ret < 0) { + vpif_dbg(2, debug, "Error setting custom DV timings\n"); + return ret; + } + + if (!(timings->bt.width && timings->bt.height && + (timings->bt.hbackporch || + timings->bt.hfrontporch || + timings->bt.hsync) && + timings->bt.vfrontporch && + (timings->bt.vbackporch || + timings->bt.vsync))) { + vpif_dbg(2, debug, "Timings for width, height, " + "horizontal back porch, horizontal sync, " + "horizontal front porch, vertical back porch, " + "vertical sync and vertical back porch " + "must be defined\n"); + return -EINVAL; + } + + *bt = timings->bt; + + /* Configure video port timings */ + + std_info->eav2sav = bt->hbackporch + bt->hfrontporch + + bt->hsync - 8; + std_info->sav2eav = bt->width; + + std_info->l1 = 1; + std_info->l3 = bt->vsync + bt->vbackporch + 1; + + if (bt->interlaced) { + if (bt->il_vbackporch || bt->il_vfrontporch || bt->il_vsync) { + std_info->vsize = bt->height * 2 + + bt->vfrontporch + bt->vsync + bt->vbackporch + + bt->il_vfrontporch + bt->il_vsync + + bt->il_vbackporch; + std_info->l5 = std_info->vsize/2 - + (bt->vfrontporch - 1); + std_info->l7 = std_info->vsize/2 + 1; + std_info->l9 = std_info->l7 + bt->il_vsync + + bt->il_vbackporch + 1; + std_info->l11 = std_info->vsize - + (bt->il_vfrontporch - 1); + } else { + vpif_dbg(2, debug, "Required timing values for " + "interlaced BT format missing\n"); + return -EINVAL; + } + } else { + std_info->vsize = bt->height + bt->vfrontporch + + bt->vsync + bt->vbackporch; + std_info->l5 = std_info->vsize - (bt->vfrontporch - 1); + } + strncpy(std_info->name, "Custom timings BT656/1120", VPIF_MAX_NAME); + std_info->width = bt->width; + std_info->height = bt->height; + std_info->frm_fmt = bt->interlaced ? 0 : 1; + std_info->ycmux_mode = 0; + std_info->capture_format = 0; + std_info->vbi_supported = 0; + std_info->hd_sd = 1; + std_info->stdid = 0; + std_info->dv_preset = V4L2_DV_INVALID; + + vid_ch->stdid = 0; + vid_ch->dv_preset = V4L2_DV_INVALID; + return 0; +} + +/** + * vpif_g_dv_timings() - G_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_g_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + struct v4l2_bt_timings *bt = &vid_ch->bt_timings; + + timings->bt = *bt; + + return 0; +} + /* * vpif_g_chip_ident() - Identify the chip * @file: file ptr @@ -2010,6 +2131,8 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_s_dv_preset = vpif_s_dv_preset, .vidioc_g_dv_preset = vpif_g_dv_preset, .vidioc_query_dv_preset = vpif_query_dv_preset, + .vidioc_s_dv_timings = vpif_s_dv_timings, + .vidioc_g_dv_timings = vpif_g_dv_timings, .vidioc_g_chip_ident = vpif_g_chip_ident, #ifdef CONFIG_VIDEO_ADV_DEBUG .vidioc_g_register = vpif_dbg_g_register, diff --git a/drivers/media/video/davinci/vpif_capture.h b/drivers/media/video/davinci/vpif_capture.h index 3452a8aec02..7a4196dfdce 100644 --- a/drivers/media/video/davinci/vpif_capture.h +++ b/drivers/media/video/davinci/vpif_capture.h @@ -60,6 +60,7 @@ struct video_obj { /* Currently selected or default standard */ v4l2_std_id stdid; u32 dv_preset; + struct v4l2_bt_timings bt_timings; /* This is to track the last input that is passed to application */ u32 input_idx; }; diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 759c5e855ac..44a885878eb 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -363,21 +363,17 @@ static irqreturn_t vpif_channel_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int vpif_get_std_info(struct channel_obj *ch) +static int vpif_update_std_info(struct channel_obj *ch) { - struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; struct video_obj *vid_ch = &ch->video; struct vpif_params *vpifparams = &ch->vpifparams; struct vpif_channel_config_params *std_info = &vpifparams->std_info; const struct vpif_channel_config_params *config; - int index; - - if (!vid_ch->stdid && !vid_ch->dv_preset) - return -EINVAL; + int i; - for (index = 0; index < vpif_ch_params_count; index++) { - config = &ch_params[index]; + for (i = 0; i < vpif_ch_params_count; i++) { + config = &ch_params[i]; if (config->hd_sd == 0) { vpif_dbg(2, debug, "SD format\n"); if (config->stdid & vid_ch->stdid) { @@ -393,17 +389,37 @@ static int vpif_get_std_info(struct channel_obj *ch) } } - if (index == vpif_ch_params_count) + if (i == vpif_ch_params_count) { + vpif_dbg(1, debug, "Format not found\n"); + return -EINVAL; + } + + return 0; +} + +static int vpif_update_resolution(struct channel_obj *ch) +{ + struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + struct video_obj *vid_ch = &ch->video; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + + if (!vid_ch->stdid && !vid_ch->dv_preset && !vid_ch->bt_timings.height) return -EINVAL; + if (vid_ch->stdid || vid_ch->dv_preset) { + if (vpif_update_std_info(ch)) + return -EINVAL; + } + common->fmt.fmt.pix.width = std_info->width; common->fmt.fmt.pix.height = std_info->height; vpif_dbg(1, debug, "Pixel details: Width = %d,Height = %d\n", common->fmt.fmt.pix.width, common->fmt.fmt.pix.height); /* Set height and width paramateres */ - ch->common[VPIF_VIDEO_INDEX].height = std_info->height; - ch->common[VPIF_VIDEO_INDEX].width = std_info->width; + common->height = std_info->height; + common->width = std_info->width; return 0; } @@ -514,10 +530,8 @@ static int vpif_check_format(struct channel_obj *ch, else sizeimage = config_params.channel_bufsize[ch->channel_id]; - if (vpif_get_std_info(ch)) { - vpif_err("Error getting the standard info\n"); + if (vpif_update_resolution(ch)) return -EINVAL; - } hpitch = pixfmt->bytesperline; vpitch = sizeimage / (hpitch * 2); @@ -715,6 +729,7 @@ static int vpif_g_fmt_vid_out(struct file *file, void *priv, struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; + int ret = 0; /* Check the validity of the buffer type */ if (common->fmt.type != fmt->type) @@ -724,14 +739,14 @@ static int vpif_g_fmt_vid_out(struct file *file, void *priv, if (mutex_lock_interruptible(&common->lock)) return -ERESTARTSYS; - if (vpif_get_std_info(ch)) { - vpif_err("Error getting the standard info\n"); - return -EINVAL; - } + if (vpif_update_resolution(ch)) + ret = -EINVAL; + else + *fmt = common->fmt; - *fmt = common->fmt; mutex_unlock(&common->lock); - return 0; + + return ret; } static int vpif_s_fmt_vid_out(struct file *file, void *priv, @@ -992,10 +1007,13 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) return -ERESTARTSYS; ch->video.stdid = *std_id; + ch->video.dv_preset = V4L2_DV_INVALID; + memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); + /* Get the information about the standard */ - if (vpif_get_std_info(ch)) { - vpif_err("Error getting the standard info\n"); - return -EINVAL; + if (vpif_update_resolution(ch)) { + ret = -EINVAL; + goto s_std_exit; } if ((ch->vpifparams.std_info.width * @@ -1362,11 +1380,11 @@ static int vpif_s_dv_preset(struct file *file, void *priv, ch->video.dv_preset = preset->preset; ch->video.stdid = V4L2_STD_UNKNOWN; + memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); /* Get the information about the standard */ - if (vpif_get_std_info(ch)) { + if (vpif_update_resolution(ch)) { ret = -EINVAL; - vpif_dbg(1, debug, "Error getting the standard info\n"); } else { /* Configure the default format information */ vpif_config_format(ch); @@ -1395,6 +1413,126 @@ static int vpif_g_dv_preset(struct file *file, void *priv, return 0; } +/** + * vpif_s_dv_timings() - S_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_s_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct vpif_params *vpifparams = &ch->vpifparams; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; + struct video_obj *vid_ch = &ch->video; + struct v4l2_bt_timings *bt = &vid_ch->bt_timings; + int ret; + + if (timings->type != V4L2_DV_BT_656_1120) { + vpif_dbg(2, debug, "Timing type not defined\n"); + return -EINVAL; + } + + /* Configure subdevice timings, if any */ + ret = v4l2_subdev_call(vpif_obj.sd[vid_ch->output_id], + video, s_dv_timings, timings); + if (ret == -ENOIOCTLCMD) { + vpif_dbg(2, debug, "Custom DV timings not supported by " + "subdevice\n"); + return -EINVAL; + } + if (ret < 0) { + vpif_dbg(2, debug, "Error setting custom DV timings\n"); + return ret; + } + + if (!(timings->bt.width && timings->bt.height && + (timings->bt.hbackporch || + timings->bt.hfrontporch || + timings->bt.hsync) && + timings->bt.vfrontporch && + (timings->bt.vbackporch || + timings->bt.vsync))) { + vpif_dbg(2, debug, "Timings for width, height, " + "horizontal back porch, horizontal sync, " + "horizontal front porch, vertical back porch, " + "vertical sync and vertical back porch " + "must be defined\n"); + return -EINVAL; + } + + *bt = timings->bt; + + /* Configure video port timings */ + + std_info->eav2sav = bt->hbackporch + bt->hfrontporch + + bt->hsync - 8; + std_info->sav2eav = bt->width; + + std_info->l1 = 1; + std_info->l3 = bt->vsync + bt->vbackporch + 1; + + if (bt->interlaced) { + if (bt->il_vbackporch || bt->il_vfrontporch || bt->il_vsync) { + std_info->vsize = bt->height * 2 + + bt->vfrontporch + bt->vsync + bt->vbackporch + + bt->il_vfrontporch + bt->il_vsync + + bt->il_vbackporch; + std_info->l5 = std_info->vsize/2 - + (bt->vfrontporch - 1); + std_info->l7 = std_info->vsize/2 + 1; + std_info->l9 = std_info->l7 + bt->il_vsync + + bt->il_vbackporch + 1; + std_info->l11 = std_info->vsize - + (bt->il_vfrontporch - 1); + } else { + vpif_dbg(2, debug, "Required timing values for " + "interlaced BT format missing\n"); + return -EINVAL; + } + } else { + std_info->vsize = bt->height + bt->vfrontporch + + bt->vsync + bt->vbackporch; + std_info->l5 = std_info->vsize - (bt->vfrontporch - 1); + } + strncpy(std_info->name, "Custom timings BT656/1120", + VPIF_MAX_NAME); + std_info->width = bt->width; + std_info->height = bt->height; + std_info->frm_fmt = bt->interlaced ? 0 : 1; + std_info->ycmux_mode = 0; + std_info->capture_format = 0; + std_info->vbi_supported = 0; + std_info->hd_sd = 1; + std_info->stdid = 0; + std_info->dv_preset = V4L2_DV_INVALID; + + vid_ch->stdid = 0; + vid_ch->dv_preset = V4L2_DV_INVALID; + + return 0; +} + +/** + * vpif_g_dv_timings() - G_DV_TIMINGS handler + * @file: file ptr + * @priv: file handle + * @timings: digital video timings + */ +static int vpif_g_dv_timings(struct file *file, void *priv, + struct v4l2_dv_timings *timings) +{ + struct vpif_fh *fh = priv; + struct channel_obj *ch = fh->channel; + struct video_obj *vid_ch = &ch->video; + struct v4l2_bt_timings *bt = &vid_ch->bt_timings; + + timings->bt = *bt; + + return 0; +} /* * vpif_g_chip_ident() - Identify the chip @@ -1498,6 +1636,8 @@ static const struct v4l2_ioctl_ops vpif_ioctl_ops = { .vidioc_enum_dv_presets = vpif_enum_dv_presets, .vidioc_s_dv_preset = vpif_s_dv_preset, .vidioc_g_dv_preset = vpif_g_dv_preset, + .vidioc_s_dv_timings = vpif_s_dv_timings, + .vidioc_g_dv_timings = vpif_g_dv_timings, .vidioc_g_chip_ident = vpif_g_chip_ident, #ifdef CONFIG_VIDEO_ADV_DEBUG .vidioc_g_register = vpif_dbg_g_register, diff --git a/drivers/media/video/davinci/vpif_display.h b/drivers/media/video/davinci/vpif_display.h index 3d56b3e356a..b53aaa88307 100644 --- a/drivers/media/video/davinci/vpif_display.h +++ b/drivers/media/video/davinci/vpif_display.h @@ -68,6 +68,7 @@ struct video_obj { v4l2_std_id stdid; /* Currently selected or default * standard */ u32 dv_preset; + struct v4l2_bt_timings bt_timings; u32 output_id; /* Current output id */ }; -- cgit v1.2.3-70-g09d2 From 2c0ddd17741383009c53cf557d6526848c8bb917 Mon Sep 17 00:00:00 2001 From: Mats Randgaard Date: Thu, 16 Dec 2010 12:17:45 -0300 Subject: [media] vpif_cap/disp: Cleanup, improved comments Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Acked-by: Murali Karicheri Acked-by: Vaibhav Hiremath Acked-by: Manjunath Hadli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif.h | 13 ++++++------- drivers/media/video/davinci/vpif_capture.c | 13 ++++++------- drivers/media/video/davinci/vpif_display.c | 16 +++++++++++++--- 3 files changed, 25 insertions(+), 17 deletions(-) diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h index b6695bee3c5..10550bd93b0 100644 --- a/drivers/media/video/davinci/vpif.h +++ b/drivers/media/video/davinci/vpif.h @@ -577,11 +577,10 @@ struct vpif_channel_config_params { char name[VPIF_MAX_NAME]; /* Name of the mode */ u16 width; /* Indicates width of the image */ u16 height; /* Indicates height of the image */ - u8 frm_fmt; /* Indicates whether this is interlaced - * or progressive format */ - u8 ycmux_mode; /* Indicates whether this mode requires - * single or two channels */ - u16 eav2sav; /* length of sav 2 eav */ + u8 frm_fmt; /* Interlaced (0) or progressive (1) */ + u8 ycmux_mode; /* This mode requires one (0) or two (1) + channels */ + u16 eav2sav; /* length of eav 2 sav */ u16 sav2eav; /* length of sav 2 eav */ u16 l1, l3, l5, l7, l9, l11; /* Other parameter configurations */ u16 vsize; /* Vertical size of the image */ @@ -589,8 +588,8 @@ struct vpif_channel_config_params { * is in BT or in CCD/CMOS */ u8 vbi_supported; /* Indicates whether this mode * supports capturing vbi or not */ - u8 hd_sd; - v4l2_std_id stdid; + u8 hd_sd; /* HDTV (1) or SDTV (0) format */ + v4l2_std_id stdid; /* SDTV format */ u32 dv_preset; /* HDTV format */ }; diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c index be2b9919937..f8e65909dc3 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/video/davinci/vpif_capture.c @@ -329,7 +329,7 @@ static void vpif_schedule_next_buffer(struct common_obj *common) * @dev_id: dev_id ptr * * It changes status of the captured buffer, takes next buffer from the queue - * and sets its address in VPIF registers + * and sets its address in VPIF registers */ static irqreturn_t vpif_channel_isr(int irq, void *dev_id) { @@ -422,14 +422,12 @@ static int vpif_update_std_info(struct channel_obj *ch) struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; struct vpif_params *vpifparams = &ch->vpifparams; const struct vpif_channel_config_params *config; - struct vpif_channel_config_params *std_info; + struct vpif_channel_config_params *std_info = &vpifparams->std_info; struct video_obj *vid_ch = &ch->video; int index; vpif_dbg(2, debug, "vpif_update_std_info\n"); - std_info = &vpifparams->std_info; - for (index = 0; index < vpif_ch_params_count; index++) { config = &ch_params[index]; if (config->hd_sd == 0) { @@ -458,6 +456,7 @@ static int vpif_update_std_info(struct channel_obj *ch) common->fmt.fmt.pix.bytesperline = std_info->width; vpifparams->video_params.hpitch = std_info->width; vpifparams->video_params.storage_mode = std_info->frm_fmt; + return 0; } @@ -1692,7 +1691,7 @@ static int vpif_s_fmt_vid_cap(struct file *file, void *priv, struct v4l2_pix_format *pixfmt; int ret = 0; - vpif_dbg(2, debug, "VIDIOC_S_FMT\n"); + vpif_dbg(2, debug, "%s\n", __func__); /* If streaming is started, return error */ if (common->started) { @@ -2336,9 +2335,9 @@ static __init int vpif_probe(struct platform_device *pdev) if (vpif_obj.sd[i]) vpif_obj.sd[i]->grp_id = 1 << i; } - v4l2_info(&vpif_obj.v4l2_dev, "DM646x VPIF Capture driver" - " initialized\n"); + v4l2_info(&vpif_obj.v4l2_dev, + "DM646x VPIF capture driver initialized\n"); return 0; probe_subdev_out: diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 44a885878eb..7cb70d916f4 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -580,7 +580,10 @@ static void vpif_config_addr(struct channel_obj *ch, int muxmode) static int vpif_mmap(struct file *filep, struct vm_area_struct *vma) { struct vpif_fh *fh = filep->private_data; - struct common_obj *common = &fh->channel->common[VPIF_VIDEO_INDEX]; + struct channel_obj *ch = fh->channel; + struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]); + + vpif_dbg(2, debug, "vpif_mmap\n"); return videobuf_mmap_mapper(&common->buffer_queue, vma); } @@ -692,7 +695,12 @@ static int vpif_release(struct file *filep) } /* functions implementing ioctls */ - +/** + * vpif_querycap() - QUERYCAP handler + * @file: file ptr + * @priv: file handle + * @cap: ptr to v4l2_capability structure + */ static int vpif_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { @@ -1106,7 +1114,7 @@ static int vpif_streamon(struct file *file, void *priv, if (ret < 0) return ret; - /* Call videobuf_streamon to start streaming in videobuf */ + /* Call videobuf_streamon to start streaming in videobuf */ ret = videobuf_streamon(&common->buffer_queue); if (ret < 0) { vpif_err("videobuf_streamon\n"); @@ -1873,6 +1881,8 @@ static __init int vpif_probe(struct platform_device *pdev) vpif_obj.sd[i]->grp_id = 1 << i; } + v4l2_info(&vpif_obj.v4l2_dev, + "DM646x VPIF display driver initialized\n"); return 0; probe_subdev_out: -- cgit v1.2.3-70-g09d2 From 46656afa8a9a410b7939b248712e4e48921929da Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 4 Jan 2011 06:51:35 -0300 Subject: [media] davinci: convert vpif_capture to core-assisted locking Now uses .unlocked_ioctl instead of .ioctl. Signed-off-by: Hans Verkuil Acked-by: Manjunath Hadli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif_capture.c | 90 +++++------------------------- 1 file changed, 14 insertions(+), 76 deletions(-) diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c index f8e65909dc3..d93ad74a34c 100644 --- a/drivers/media/video/davinci/vpif_capture.c +++ b/drivers/media/video/davinci/vpif_capture.c @@ -752,7 +752,7 @@ static int vpif_open(struct file *filep) struct video_obj *vid_ch; struct channel_obj *ch; struct vpif_fh *fh; - int i, ret = 0; + int i; vpif_dbg(2, debug, "vpif_open\n"); @@ -761,9 +761,6 @@ static int vpif_open(struct file *filep) vid_ch = &ch->video; common = &ch->common[VPIF_VIDEO_INDEX]; - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - if (NULL == ch->curr_subdev_info) { /** * search through the sub device to see a registered @@ -780,8 +777,7 @@ static int vpif_open(struct file *filep) } if (i == config->subdev_count) { vpif_err("No sub device registered\n"); - ret = -ENOENT; - goto exit; + return -ENOENT; } } @@ -789,8 +785,7 @@ static int vpif_open(struct file *filep) fh = kzalloc(sizeof(struct vpif_fh), GFP_KERNEL); if (NULL == fh) { vpif_err("unable to allocate memory for file handle object\n"); - ret = -ENOMEM; - goto exit; + return -ENOMEM; } /* store pointer to fh in private_data member of filep */ @@ -810,9 +805,7 @@ static int vpif_open(struct file *filep) /* Initialize priority of this instance to default priority */ fh->prio = V4L2_PRIORITY_UNSET; v4l2_prio_open(&ch->prio, &fh->prio); -exit: - mutex_unlock(&common->lock); - return ret; + return 0; } /** @@ -832,9 +825,6 @@ static int vpif_release(struct file *filep) common = &ch->common[VPIF_VIDEO_INDEX]; - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - /* if this instance is doing IO */ if (fh->io_allowed[VPIF_VIDEO_INDEX]) { /* Reset io_usrs member of channel object */ @@ -858,9 +848,6 @@ static int vpif_release(struct file *filep) /* Decrement channel usrs counter */ ch->usrs--; - /* unlock mutex on channel object */ - mutex_unlock(&common->lock); - /* Close the priority */ v4l2_prio_close(&ch->prio, fh->prio); @@ -885,7 +872,6 @@ static int vpif_reqbufs(struct file *file, void *priv, struct channel_obj *ch = fh->channel; struct common_obj *common; u8 index = 0; - int ret = 0; vpif_dbg(2, debug, "vpif_reqbufs\n"); @@ -908,13 +894,8 @@ static int vpif_reqbufs(struct file *file, void *priv, common = &ch->common[index]; - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - - if (0 != common->io_usrs) { - ret = -EBUSY; - goto reqbuf_exit; - } + if (0 != common->io_usrs) + return -EBUSY; /* Initialize videobuf queue as per the buffer type */ videobuf_queue_dma_contig_init(&common->buffer_queue, @@ -923,7 +904,7 @@ static int vpif_reqbufs(struct file *file, void *priv, reqbuf->type, common->fmt.fmt.pix.field, sizeof(struct videobuf_buffer), fh, - NULL); + &common->lock); /* Set io allowed member of file handle to TRUE */ fh->io_allowed[index] = 1; @@ -934,11 +915,7 @@ static int vpif_reqbufs(struct file *file, void *priv, INIT_LIST_HEAD(&common->dma_queue); /* Allocate buffers */ - ret = videobuf_reqbufs(&common->buffer_queue, reqbuf); - -reqbuf_exit: - mutex_unlock(&common->lock); - return ret; + return videobuf_reqbufs(&common->buffer_queue, reqbuf); } /** @@ -1152,11 +1129,6 @@ static int vpif_streamon(struct file *file, void *priv, return ret; } - if (mutex_lock_interruptible(&common->lock)) { - ret = -ERESTARTSYS; - goto streamoff_exit; - } - /* If buffer queue is empty, return error */ if (list_empty(&common->dma_queue)) { vpif_dbg(1, debug, "buffer queue is empty\n"); @@ -1235,13 +1207,10 @@ static int vpif_streamon(struct file *file, void *priv, enable_channel1(1); } channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1; - mutex_unlock(&common->lock); return ret; exit: - mutex_unlock(&common->lock); -streamoff_exit: - ret = videobuf_streamoff(&common->buffer_queue); + videobuf_streamoff(&common->buffer_queue); return ret; } @@ -1279,9 +1248,6 @@ static int vpif_streamoff(struct file *file, void *priv, return -EINVAL; } - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - /* disable channel */ if (VPIF_CHANNEL0_VIDEO == ch->channel_id) { enable_channel0(0); @@ -1299,8 +1265,6 @@ static int vpif_streamoff(struct file *file, void *priv, if (ret && (ret != -ENOIOCTLCMD)) vpif_dbg(1, debug, "stream off failed in subdev\n"); - mutex_unlock(&common->lock); - return videobuf_streamoff(&common->buffer_queue); } @@ -1376,21 +1340,16 @@ static int vpif_querystd(struct file *file, void *priv, v4l2_std_id *std_id) { struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; - struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; int ret = 0; vpif_dbg(2, debug, "vpif_querystd\n"); - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - /* Call querystd function of decoder device */ ret = v4l2_subdev_call(vpif_obj.sd[ch->curr_sd_index], video, querystd, std_id); if (ret < 0) vpif_dbg(1, debug, "Failed to set standard for sub devices\n"); - mutex_unlock(&common->lock); return ret; } @@ -1446,18 +1405,14 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) fh->initialized = 1; /* Call encoder subdevice function to set the standard */ - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - ch->video.stdid = *std_id; ch->video.dv_preset = V4L2_DV_INVALID; memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); /* Get the information about the standard */ if (vpif_update_std_info(ch)) { - ret = -EINVAL; vpif_err("Error getting the standard info\n"); - goto s_std_exit; + return -EINVAL; } /* Configure the default format information */ @@ -1468,9 +1423,6 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) s_std, *std_id); if (ret < 0) vpif_dbg(1, debug, "Failed to set standard for sub devices\n"); - -s_std_exit: - mutex_unlock(&common->lock); return ret; } @@ -1564,9 +1516,6 @@ static int vpif_s_input(struct file *file, void *priv, unsigned int index) return -EINVAL; } - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - /* first setup input path from sub device to vpif */ if (config->setup_input_path) { ret = config->setup_input_path(ch->channel_id, @@ -1575,7 +1524,7 @@ static int vpif_s_input(struct file *file, void *priv, unsigned int index) vpif_dbg(1, debug, "couldn't setup input path for the" " sub device %s, for input index %d\n", subdev_info->name, index); - goto exit; + return ret; } } @@ -1586,7 +1535,7 @@ static int vpif_s_input(struct file *file, void *priv, unsigned int index) input, output, 0); if (ret < 0) { vpif_dbg(1, debug, "Failed to set input\n"); - goto exit; + return ret; } } vid_ch->input_idx = index; @@ -1597,9 +1546,6 @@ static int vpif_s_input(struct file *file, void *priv, unsigned int index) /* update tvnorms from the sub device input info */ ch->video_dev->tvnorms = chan_cfg->inputs[index].input.std; - -exit: - mutex_unlock(&common->lock); return ret; } @@ -1668,11 +1614,7 @@ static int vpif_g_fmt_vid_cap(struct file *file, void *priv, return -EINVAL; /* Fill in the information about format */ - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - *fmt = common->fmt; - mutex_unlock(&common->lock); return 0; } @@ -1720,12 +1662,7 @@ static int vpif_s_fmt_vid_cap(struct file *file, void *priv, if (ret) return ret; /* store the format in the channel object */ - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - common->fmt = *fmt; - mutex_unlock(&common->lock); - return 0; } @@ -2145,7 +2082,7 @@ static struct v4l2_file_operations vpif_fops = { .owner = THIS_MODULE, .open = vpif_open, .release = vpif_release, - .ioctl = video_ioctl2, + .unlocked_ioctl = video_ioctl2, .mmap = vpif_mmap, .poll = vpif_poll }; @@ -2288,6 +2225,7 @@ static __init int vpif_probe(struct platform_device *pdev) common = &(ch->common[VPIF_VIDEO_INDEX]); spin_lock_init(&common->irqlock); mutex_init(&common->lock); + ch->video_dev->lock = &common->lock; /* Initialize prio member of channel object */ v4l2_prio_init(&ch->prio); err = video_register_device(ch->video_dev, -- cgit v1.2.3-70-g09d2 From 9bfaae24f991ff5255de17cd05838d1cd131727c Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 5 Jan 2011 13:35:45 -0300 Subject: [media] davinci: convert vpif_display to core-assisted locking vpif_display now uses .unlocked_ioctl instead of .ioctl. Signed-off-by: Hans Verkuil Acked-by: Manjunath Hadli Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif_display.c | 98 ++++++------------------------ 1 file changed, 20 insertions(+), 78 deletions(-) diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index 7cb70d916f4..cdf659abdc2 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -652,9 +652,6 @@ static int vpif_release(struct file *filep) struct channel_obj *ch = fh->channel; struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - /* if this instance is doing IO */ if (fh->io_allowed[VPIF_VIDEO_INDEX]) { /* Reset io_usrs member of channel object */ @@ -677,8 +674,6 @@ static int vpif_release(struct file *filep) config_params.numbuffers[ch->channel_id]; } - mutex_unlock(&common->lock); - /* Decrement channel usrs counter */ atomic_dec(&ch->usrs); /* If this file handle has initialize encoder device, reset it */ @@ -737,24 +732,15 @@ static int vpif_g_fmt_vid_out(struct file *file, void *priv, struct vpif_fh *fh = priv; struct channel_obj *ch = fh->channel; struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; - int ret = 0; /* Check the validity of the buffer type */ if (common->fmt.type != fmt->type) return -EINVAL; - /* Fill in the information about format */ - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - if (vpif_update_resolution(ch)) - ret = -EINVAL; - else - *fmt = common->fmt; - - mutex_unlock(&common->lock); - - return ret; + return -EINVAL; + *fmt = common->fmt; + return 0; } static int vpif_s_fmt_vid_out(struct file *file, void *priv, @@ -794,12 +780,7 @@ static int vpif_s_fmt_vid_out(struct file *file, void *priv, /* store the pix format in the channel object */ common->fmt.fmt.pix = *pixfmt; /* store the format in the channel object */ - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - common->fmt = *fmt; - mutex_unlock(&common->lock); - return 0; } @@ -829,7 +810,6 @@ static int vpif_reqbufs(struct file *file, void *priv, struct common_obj *common; enum v4l2_field field; u8 index = 0; - int ret = 0; /* This file handle has not initialized the channel, It is not allowed to do settings */ @@ -847,18 +827,12 @@ static int vpif_reqbufs(struct file *file, void *priv, index = VPIF_VIDEO_INDEX; common = &ch->common[index]; - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - if (common->fmt.type != reqbuf->type) { - ret = -EINVAL; - goto reqbuf_exit; - } + if (common->fmt.type != reqbuf->type) + return -EINVAL; - if (0 != common->io_usrs) { - ret = -EBUSY; - goto reqbuf_exit; - } + if (0 != common->io_usrs) + return -EBUSY; if (reqbuf->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) { if (common->fmt.fmt.pix.field == V4L2_FIELD_ANY) @@ -875,7 +849,7 @@ static int vpif_reqbufs(struct file *file, void *priv, &common->irqlock, reqbuf->type, field, sizeof(struct videobuf_buffer), fh, - NULL); + &common->lock); /* Set io allowed member of file handle to TRUE */ fh->io_allowed[index] = 1; @@ -886,11 +860,7 @@ static int vpif_reqbufs(struct file *file, void *priv, INIT_LIST_HEAD(&common->dma_queue); /* Allocate buffers */ - ret = videobuf_reqbufs(&common->buffer_queue, reqbuf); - -reqbuf_exit: - mutex_unlock(&common->lock); - return ret; + return videobuf_reqbufs(&common->buffer_queue, reqbuf); } static int vpif_querybuf(struct file *file, void *priv, @@ -1011,25 +981,19 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) } /* Call encoder subdevice function to set the standard */ - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - ch->video.stdid = *std_id; ch->video.dv_preset = V4L2_DV_INVALID; memset(&ch->video.bt_timings, 0, sizeof(ch->video.bt_timings)); /* Get the information about the standard */ - if (vpif_update_resolution(ch)) { - ret = -EINVAL; - goto s_std_exit; - } + if (vpif_update_resolution(ch)) + return -EINVAL; if ((ch->vpifparams.std_info.width * ch->vpifparams.std_info.height * 2) > config_params.channel_bufsize[ch->channel_id]) { vpif_err("invalid std for this size\n"); - ret = -EINVAL; - goto s_std_exit; + return -EINVAL; } common->fmt.fmt.pix.bytesperline = common->fmt.fmt.pix.width; @@ -1040,16 +1004,13 @@ static int vpif_s_std(struct file *file, void *priv, v4l2_std_id *std_id) s_std_output, *std_id); if (ret < 0) { vpif_err("Failed to set output standard\n"); - goto s_std_exit; + return ret; } ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, core, s_std, *std_id); if (ret < 0) vpif_err("Failed to set standard for sub devices\n"); - -s_std_exit: - mutex_unlock(&common->lock); return ret; } @@ -1121,14 +1082,10 @@ static int vpif_streamon(struct file *file, void *priv, return ret; } - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - /* If buffer queue is empty, return error */ if (list_empty(&common->dma_queue)) { vpif_err("buffer queue is empty\n"); - ret = -EIO; - goto streamon_exit; + return -EIO; } /* Get the next frame from the buffer queue */ @@ -1154,8 +1111,7 @@ static int vpif_streamon(struct file *file, void *priv, || (!ch->vpifparams.std_info.frm_fmt && (common->fmt.fmt.pix.field == V4L2_FIELD_NONE))) { vpif_err("conflict in field format and std format\n"); - ret = -EINVAL; - goto streamon_exit; + return -EINVAL; } /* clock settings */ @@ -1164,13 +1120,13 @@ static int vpif_streamon(struct file *file, void *priv, ch->vpifparams.std_info.hd_sd); if (ret < 0) { vpif_err("can't set clock\n"); - goto streamon_exit; + return ret; } /* set the parameters and addresses */ ret = vpif_set_video_params(vpif, ch->channel_id + 2); if (ret < 0) - goto streamon_exit; + return ret; common->started = ret; vpif_config_addr(ch, ret); @@ -1195,9 +1151,6 @@ static int vpif_streamon(struct file *file, void *priv, } channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1; } - -streamon_exit: - mutex_unlock(&common->lock); return ret; } @@ -1223,9 +1176,6 @@ static int vpif_streamoff(struct file *file, void *priv, return -EINVAL; } - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - if (buftype == V4L2_BUF_TYPE_VIDEO_OUTPUT) { /* disable channel */ if (VPIF_CHANNEL2_VIDEO == ch->channel_id) { @@ -1240,8 +1190,6 @@ static int vpif_streamoff(struct file *file, void *priv, } common->started = 0; - mutex_unlock(&common->lock); - return videobuf_streamoff(&common->buffer_queue); } @@ -1288,13 +1236,9 @@ static int vpif_s_output(struct file *file, void *priv, unsigned int i) struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX]; int ret = 0; - if (mutex_lock_interruptible(&common->lock)) - return -ERESTARTSYS; - if (common->started) { vpif_err("Streaming in progress\n"); - ret = -EBUSY; - goto s_output_exit; + return -EBUSY; } ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video, @@ -1304,9 +1248,6 @@ static int vpif_s_output(struct file *file, void *priv, unsigned int i) vpif_err("Failed to set output standard\n"); vid_ch->output_id = i; - -s_output_exit: - mutex_unlock(&common->lock); return ret; } @@ -1658,7 +1599,7 @@ static const struct v4l2_file_operations vpif_fops = { .owner = THIS_MODULE, .open = vpif_open, .release = vpif_release, - .ioctl = video_ioctl2, + .unlocked_ioctl = video_ioctl2, .mmap = vpif_mmap, .poll = vpif_poll }; @@ -1842,6 +1783,7 @@ static __init int vpif_probe(struct platform_device *pdev) v4l2_prio_init(&ch->prio); ch->common[VPIF_VIDEO_INDEX].fmt.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + ch->video_dev->lock = &common->lock; /* register video device */ vpif_dbg(1, debug, "channel=%x,channel->video_dev=%x\n", -- cgit v1.2.3-70-g09d2 From 90d873a7f9389478e68494c530afab8b19c04f29 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 5 Jan 2011 14:40:07 -0300 Subject: [media] radio-maxiradio.c: use sensible frequency range Use the standard USA/Europe frequency range of 87-108 MHz instead of the arbitrary 50-150 MHz. Copied from the radio-gemtek-pci driver which supports the same hardware. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-maxiradio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index 6459a220b0d..5c2a9058c09 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -77,8 +77,8 @@ MODULE_PARM_DESC(debug, "activates debug info"); /* TEA5757 pin mappings */ static const int clk = 1, data = 2, wren = 4, mo_st = 8, power = 16; -#define FREQ_LO (50 * 16000) -#define FREQ_HI (150 * 16000) +#define FREQ_LO (87 * 16000) +#define FREQ_HI (108 * 16000) #define FREQ_IF 171200 /* 10.7*16000 */ #define FREQ_STEP 200 /* 12.5*16 */ -- cgit v1.2.3-70-g09d2 From 424852f4374561630d526e7bb04eec5bb7d665a1 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 5 Jan 2011 14:42:41 -0300 Subject: [media] radio-gemtek-pci: remove duplicate driver The radio-gemtek-pci driver is for the same hardware as the radio-maxiradio driver which uses the same GemTek PR103 and tea5757 combination and the two drivers are identical. I chose the maxiradio over the gemtek-pci driver since the maxiradio has support for mono/stereo detection. Tested with my gemtek-pci card. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/Kconfig | 14 - drivers/media/radio/Makefile | 1 - drivers/media/radio/radio-gemtek-pci.c | 478 --------------------------------- 3 files changed, 493 deletions(-) delete mode 100644 drivers/media/radio/radio-gemtek-pci.c diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 3c5a4739ed7..ecdffa6aac6 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -151,20 +151,6 @@ config RADIO_GEMTEK_PROBE following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and 0x28c. -config RADIO_GEMTEK_PCI - tristate "GemTek PCI Radio Card support" - depends on VIDEO_V4L2 && PCI - ---help--- - Choose Y here if you have this PCI FM radio card. - - In order to control your radio card, you will need to use programs - that are compatible with the Video for Linux API. Information on - this API and pointers to "v4l" programs may be found at - . - - To compile this driver as a module, choose M here: the - module will be called radio-gemtek-pci. - config RADIO_MAXIRADIO tristate "Guillemot MAXI Radio FM 2000 radio" depends on VIDEO_V4L2 && PCI diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile index d2970748a69..717656d2f74 100644 --- a/drivers/media/radio/Makefile +++ b/drivers/media/radio/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_RADIO_MAXIRADIO) += radio-maxiradio.o obj-$(CONFIG_RADIO_RTRACK) += radio-aimslab.o obj-$(CONFIG_RADIO_ZOLTRIX) += radio-zoltrix.o obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o -obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o obj-$(CONFIG_RADIO_TRUST) += radio-trust.o obj-$(CONFIG_I2C_SI4713) += si4713-i2c.o obj-$(CONFIG_RADIO_SI4713) += radio-si4713.o diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c deleted file mode 100644 index 28fa85ba208..00000000000 --- a/drivers/media/radio/radio-gemtek-pci.c +++ /dev/null @@ -1,478 +0,0 @@ -/* - *************************************************************************** - * - * radio-gemtek-pci.c - Gemtek PCI Radio driver - * (C) 2001 Vladimir Shebordaev - * - *************************************************************************** - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - * USA. - * - *************************************************************************** - * - * Gemtek Corp still silently refuses to release any specifications - * of their multimedia devices, so the protocol still has to be - * reverse engineered. - * - * The v4l code was inspired by Jonas Munsin's Gemtek serial line - * radio device driver. - * - * Please, let me know if this piece of code was useful :) - * - * TODO: multiple device support and portability were not tested - * - * Converted to V4L2 API by Mauro Carvalho Chehab - * - *************************************************************************** - */ - -#include -#include -#include -#include -#include -#include -#include -#include /* for KERNEL_VERSION MACRO */ -#include -#include -#include -#include - -MODULE_AUTHOR("Vladimir Shebordaev "); -MODULE_DESCRIPTION("The video4linux driver for the Gemtek PCI Radio Card"); -MODULE_LICENSE("GPL"); - -static int nr_radio = -1; -static int mx = 1; - -module_param(mx, bool, 0); -MODULE_PARM_DESC(mx, "single digit: 1 - turn off the turner upon module exit (default), 0 - do not"); -module_param(nr_radio, int, 0); -MODULE_PARM_DESC(nr_radio, "video4linux device number to use"); - -#define RADIO_VERSION KERNEL_VERSION(0, 0, 2) - -#ifndef PCI_VENDOR_ID_GEMTEK -#define PCI_VENDOR_ID_GEMTEK 0x5046 -#endif - -#ifndef PCI_DEVICE_ID_GEMTEK_PR103 -#define PCI_DEVICE_ID_GEMTEK_PR103 0x1001 -#endif - -#ifndef GEMTEK_PCI_RANGE_LOW -#define GEMTEK_PCI_RANGE_LOW (87*16000) -#endif - -#ifndef GEMTEK_PCI_RANGE_HIGH -#define GEMTEK_PCI_RANGE_HIGH (108*16000) -#endif - -struct gemtek_pci { - struct v4l2_device v4l2_dev; - struct video_device vdev; - struct mutex lock; - struct pci_dev *pdev; - - u32 iobase; - u32 length; - - u32 current_frequency; - u8 mute; -}; - -static inline struct gemtek_pci *to_gemtek_pci(struct v4l2_device *v4l2_dev) -{ - return container_of(v4l2_dev, struct gemtek_pci, v4l2_dev); -} - -static inline u8 gemtek_pci_out(u16 value, u32 port) -{ - outw(value, port); - - return (u8)value; -} - -#define _b0(v) (*((u8 *)&v)) - -static void __gemtek_pci_cmd(u16 value, u32 port, u8 *last_byte, int keep) -{ - u8 byte = *last_byte; - - if (!value) { - if (!keep) - value = (u16)port; - byte &= 0xfd; - } else - byte |= 2; - - _b0(value) = byte; - outw(value, port); - byte |= 1; - _b0(value) = byte; - outw(value, port); - byte &= 0xfe; - _b0(value) = byte; - outw(value, port); - - *last_byte = byte; -} - -static inline void gemtek_pci_nil(u32 port, u8 *last_byte) -{ - __gemtek_pci_cmd(0x00, port, last_byte, false); -} - -static inline void gemtek_pci_cmd(u16 cmd, u32 port, u8 *last_byte) -{ - __gemtek_pci_cmd(cmd, port, last_byte, true); -} - -static void gemtek_pci_setfrequency(struct gemtek_pci *card, unsigned long frequency) -{ - int i; - u32 value = frequency / 200 + 856; - u16 mask = 0x8000; - u8 last_byte; - u32 port = card->iobase; - - mutex_lock(&card->lock); - card->current_frequency = frequency; - last_byte = gemtek_pci_out(0x06, port); - - i = 0; - do { - gemtek_pci_nil(port, &last_byte); - i++; - } while (i < 9); - - i = 0; - do { - gemtek_pci_cmd(value & mask, port, &last_byte); - mask >>= 1; - i++; - } while (i < 16); - - outw(0x10, port); - mutex_unlock(&card->lock); -} - - -static void gemtek_pci_mute(struct gemtek_pci *card) -{ - mutex_lock(&card->lock); - outb(0x1f, card->iobase); - card->mute = true; - mutex_unlock(&card->lock); -} - -static void gemtek_pci_unmute(struct gemtek_pci *card) -{ - if (card->mute) { - gemtek_pci_setfrequency(card, card->current_frequency); - card->mute = false; - } -} - -static int gemtek_pci_getsignal(struct gemtek_pci *card) -{ - int sig; - - mutex_lock(&card->lock); - sig = (inb(card->iobase) & 0x08) ? 0 : 1; - mutex_unlock(&card->lock); - return sig; -} - -static int vidioc_querycap(struct file *file, void *priv, - struct v4l2_capability *v) -{ - struct gemtek_pci *card = video_drvdata(file); - - strlcpy(v->driver, "radio-gemtek-pci", sizeof(v->driver)); - strlcpy(v->card, "GemTek PCI Radio", sizeof(v->card)); - snprintf(v->bus_info, sizeof(v->bus_info), "PCI:%s", pci_name(card->pdev)); - v->version = RADIO_VERSION; - v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; - return 0; -} - -static int vidioc_g_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - struct gemtek_pci *card = video_drvdata(file); - - if (v->index > 0) - return -EINVAL; - - strlcpy(v->name, "FM", sizeof(v->name)); - v->type = V4L2_TUNER_RADIO; - v->rangelow = GEMTEK_PCI_RANGE_LOW; - v->rangehigh = GEMTEK_PCI_RANGE_HIGH; - v->rxsubchans = V4L2_TUNER_SUB_MONO; - v->capability = V4L2_TUNER_CAP_LOW; - v->audmode = V4L2_TUNER_MODE_MONO; - v->signal = 0xffff * gemtek_pci_getsignal(card); - return 0; -} - -static int vidioc_s_tuner(struct file *file, void *priv, - struct v4l2_tuner *v) -{ - return v->index ? -EINVAL : 0; -} - -static int vidioc_s_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct gemtek_pci *card = video_drvdata(file); - - if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) - return -EINVAL; - if (f->frequency < GEMTEK_PCI_RANGE_LOW || - f->frequency > GEMTEK_PCI_RANGE_HIGH) - return -EINVAL; - gemtek_pci_setfrequency(card, f->frequency); - card->mute = false; - return 0; -} - -static int vidioc_g_frequency(struct file *file, void *priv, - struct v4l2_frequency *f) -{ - struct gemtek_pci *card = video_drvdata(file); - - if (f->tuner != 0) - return -EINVAL; - f->type = V4L2_TUNER_RADIO; - f->frequency = card->current_frequency; - return 0; -} - -static int vidioc_queryctrl(struct file *file, void *priv, - struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_AUDIO_MUTE: - return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); - case V4L2_CID_AUDIO_VOLUME: - return v4l2_ctrl_query_fill(qc, 0, 65535, 65535, 65535); - } - return -EINVAL; -} - -static int vidioc_g_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct gemtek_pci *card = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - ctrl->value = card->mute; - return 0; - case V4L2_CID_AUDIO_VOLUME: - if (card->mute) - ctrl->value = 0; - else - ctrl->value = 65535; - return 0; - } - return -EINVAL; -} - -static int vidioc_s_ctrl(struct file *file, void *priv, - struct v4l2_control *ctrl) -{ - struct gemtek_pci *card = video_drvdata(file); - - switch (ctrl->id) { - case V4L2_CID_AUDIO_MUTE: - if (ctrl->value) - gemtek_pci_mute(card); - else - gemtek_pci_unmute(card); - return 0; - case V4L2_CID_AUDIO_VOLUME: - if (ctrl->value) - gemtek_pci_unmute(card); - else - gemtek_pci_mute(card); - return 0; - } - return -EINVAL; -} - -static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) -{ - *i = 0; - return 0; -} - -static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) -{ - return i ? -EINVAL : 0; -} - -static int vidioc_g_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - a->index = 0; - strlcpy(a->name, "Radio", sizeof(a->name)); - a->capability = V4L2_AUDCAP_STEREO; - return 0; -} - -static int vidioc_s_audio(struct file *file, void *priv, - struct v4l2_audio *a) -{ - return a->index ? -EINVAL : 0; -} - -enum { - GEMTEK_PR103 -}; - -static char *card_names[] __devinitdata = { - "GEMTEK_PR103" -}; - -static struct pci_device_id gemtek_pci_id[] = -{ - { PCI_VENDOR_ID_GEMTEK, PCI_DEVICE_ID_GEMTEK_PR103, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, GEMTEK_PR103 }, - { 0 } -}; - -MODULE_DEVICE_TABLE(pci, gemtek_pci_id); - -static const struct v4l2_file_operations gemtek_pci_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = video_ioctl2, -}; - -static const struct v4l2_ioctl_ops gemtek_pci_ioctl_ops = { - .vidioc_querycap = vidioc_querycap, - .vidioc_g_tuner = vidioc_g_tuner, - .vidioc_s_tuner = vidioc_s_tuner, - .vidioc_g_audio = vidioc_g_audio, - .vidioc_s_audio = vidioc_s_audio, - .vidioc_g_input = vidioc_g_input, - .vidioc_s_input = vidioc_s_input, - .vidioc_g_frequency = vidioc_g_frequency, - .vidioc_s_frequency = vidioc_s_frequency, - .vidioc_queryctrl = vidioc_queryctrl, - .vidioc_g_ctrl = vidioc_g_ctrl, - .vidioc_s_ctrl = vidioc_s_ctrl, -}; - -static int __devinit gemtek_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) -{ - struct gemtek_pci *card; - struct v4l2_device *v4l2_dev; - int res; - - card = kzalloc(sizeof(struct gemtek_pci), GFP_KERNEL); - if (card == NULL) { - dev_err(&pdev->dev, "out of memory\n"); - return -ENOMEM; - } - - v4l2_dev = &card->v4l2_dev; - mutex_init(&card->lock); - card->pdev = pdev; - - strlcpy(v4l2_dev->name, "gemtek_pci", sizeof(v4l2_dev->name)); - - res = v4l2_device_register(&pdev->dev, v4l2_dev); - if (res < 0) { - v4l2_err(v4l2_dev, "Could not register v4l2_device\n"); - kfree(card); - return res; - } - - if (pci_enable_device(pdev)) - goto err_pci; - - card->iobase = pci_resource_start(pdev, 0); - card->length = pci_resource_len(pdev, 0); - - if (request_region(card->iobase, card->length, card_names[pci_id->driver_data]) == NULL) { - v4l2_err(v4l2_dev, "i/o port already in use\n"); - goto err_pci; - } - - strlcpy(card->vdev.name, v4l2_dev->name, sizeof(card->vdev.name)); - card->vdev.v4l2_dev = v4l2_dev; - card->vdev.fops = &gemtek_pci_fops; - card->vdev.ioctl_ops = &gemtek_pci_ioctl_ops; - card->vdev.release = video_device_release_empty; - video_set_drvdata(&card->vdev, card); - - gemtek_pci_mute(card); - - if (video_register_device(&card->vdev, VFL_TYPE_RADIO, nr_radio) < 0) - goto err_video; - - v4l2_info(v4l2_dev, "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n", - pdev->revision, card->iobase, card->iobase + card->length - 1); - - return 0; - -err_video: - release_region(card->iobase, card->length); - -err_pci: - v4l2_device_unregister(v4l2_dev); - kfree(card); - return -ENODEV; -} - -static void __devexit gemtek_pci_remove(struct pci_dev *pdev) -{ - struct v4l2_device *v4l2_dev = dev_get_drvdata(&pdev->dev); - struct gemtek_pci *card = to_gemtek_pci(v4l2_dev); - - video_unregister_device(&card->vdev); - v4l2_device_unregister(v4l2_dev); - - release_region(card->iobase, card->length); - - if (mx) - gemtek_pci_mute(card); - - kfree(card); -} - -static struct pci_driver gemtek_pci_driver = { - .name = "gemtek_pci", - .id_table = gemtek_pci_id, - .probe = gemtek_pci_probe, - .remove = __devexit_p(gemtek_pci_remove), -}; - -static int __init gemtek_pci_init(void) -{ - return pci_register_driver(&gemtek_pci_driver); -} - -static void __exit gemtek_pci_exit(void) -{ - pci_unregister_driver(&gemtek_pci_driver); -} - -module_init(gemtek_pci_init); -module_exit(gemtek_pci_exit); -- cgit v1.2.3-70-g09d2 From 82f4b5b67e795fe03952b278873712e4562304d2 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Fri, 7 Jan 2011 21:59:11 -0300 Subject: [media] af9013: fix AF9013 TDA18271 IF config IF freq for DVB-T 7 MHz and 8 MHz was set slightly wrong. Due to that it didn't worked at all (?) for 7 MHz channels and most likely performance was dropped for 8 MHz channels. That bug was pointed by few people during last two months. Thank you. Trivial fix. Compile tested only due to lack of proper HW and signal. Signed-off-by: Antti Palosaari Cc: Romolo Manfredini Cc: Alireza Moini Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/af9013.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c index ce222055526..ba25fa0b0fc 100644 --- a/drivers/media/dvb/frontends/af9013.c +++ b/drivers/media/dvb/frontends/af9013.c @@ -334,11 +334,11 @@ static int af9013_set_freq_ctrl(struct af9013_state *state, fe_bandwidth_t bw) if_sample_freq = 3300000; /* 3.3 MHz */ break; case BANDWIDTH_7_MHZ: - if_sample_freq = 3800000; /* 3.8 MHz */ + if_sample_freq = 3500000; /* 3.5 MHz */ break; case BANDWIDTH_8_MHZ: default: - if_sample_freq = 4300000; /* 4.3 MHz */ + if_sample_freq = 4000000; /* 4.0 MHz */ break; } } else if (state->config.tuner == AF9013_TUNER_TDA18218) { -- cgit v1.2.3-70-g09d2 From 4e770f7602fb2285f3106f98109d0685618ddc22 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 30 Dec 2010 13:11:21 -0300 Subject: [media] gspca_main: Locking fixes 1 The gspca_dev->streaming boolean is protected against multiple access through gspca_dev->queue_lock everywhere except for 2 places. This patch fixes this by bringing it under the lock in vidioc_streamoff. And by removing the check for gspca_dev->streaming in gspca_disconnect, the destroy_urbs call may be called multiple times (and is protected by the usb_lock) and calling wake_up_interruptible can also always be done safely. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 442970073e8..74626b6a9eb 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1630,11 +1630,15 @@ static int vidioc_streamoff(struct file *file, void *priv, if (buf_type != V4L2_BUF_TYPE_VIDEO_CAPTURE) return -EINVAL; - if (!gspca_dev->streaming) - return 0; + if (mutex_lock_interruptible(&gspca_dev->queue_lock)) return -ERESTARTSYS; + if (!gspca_dev->streaming) { + ret = 0; + goto out; + } + /* check the capture file */ if (gspca_dev->capt_file != file) { ret = -EBUSY; @@ -2341,12 +2345,11 @@ void gspca_disconnect(struct usb_interface *intf) PDEBUG(D_PROBE, "%s disconnect", video_device_node_name(&gspca_dev->vdev)); mutex_lock(&gspca_dev->usb_lock); + gspca_dev->present = 0; + wake_up_interruptible(&gspca_dev->wq); - if (gspca_dev->streaming) { - destroy_urbs(gspca_dev); - wake_up_interruptible(&gspca_dev->wq); - } + destroy_urbs(gspca_dev); #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) gspca_input_destroy_urb(gspca_dev); -- cgit v1.2.3-70-g09d2 From 27074efa2ee8c1ef07dc5f644104e35d39e43322 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 30 Dec 2010 19:54:33 -0300 Subject: [media] gspca_main: Locking fixes 2 Before this patch vidioc_dqbuf is using its own read_lock, where as other queue related functions use queue_lock. This means that dqbuf is accessing several variables in a racy manor. The most important one being fr_o, which may be changed from underneath dqbuf by vidioc_reqbufs or vidioc_streamoff. Other variables which it accesses unprotected are gspca_dev->memory, gspca_dev->streaming and gspca_dev->capt_file. This patch fixes this by changing vidioc_dqbuf to also use the queue_lock. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 112 ++++++++++++++++++++------------------ drivers/media/video/gspca/gspca.h | 1 - 2 files changed, 58 insertions(+), 55 deletions(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 74626b6a9eb..64ecf669d65 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1831,33 +1831,77 @@ out: return ret; } +static int frame_ready_nolock(struct gspca_dev *gspca_dev, struct file *file, + enum v4l2_memory memory) +{ + if (!gspca_dev->present) + return -ENODEV; + if (gspca_dev->capt_file != file || gspca_dev->memory != memory || + !gspca_dev->streaming) + return -EINVAL; + + /* check if a frame is ready */ + return gspca_dev->fr_o != atomic_read(&gspca_dev->fr_i); +} + +static int frame_ready(struct gspca_dev *gspca_dev, struct file *file, + enum v4l2_memory memory) +{ + int ret; + + if (mutex_lock_interruptible(&gspca_dev->queue_lock)) + return -ERESTARTSYS; + ret = frame_ready_nolock(gspca_dev, file, memory); + mutex_unlock(&gspca_dev->queue_lock); + return ret; +} + /* - * wait for a video frame + * dequeue a video buffer * - * If a frame is ready, its index is returned. + * If nonblock_ing is false, block until a buffer is available. */ -static int frame_wait(struct gspca_dev *gspca_dev, - int nonblock_ing) +static int vidioc_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *v4l2_buf) { - int i, ret; + struct gspca_dev *gspca_dev = priv; + struct gspca_frame *frame; + int i, j, ret; - /* check if a frame is ready */ - i = gspca_dev->fr_o; - if (i == atomic_read(&gspca_dev->fr_i)) { - if (nonblock_ing) + PDEBUG(D_FRAM, "dqbuf"); + + if (mutex_lock_interruptible(&gspca_dev->queue_lock)) + return -ERESTARTSYS; + + for (;;) { + ret = frame_ready_nolock(gspca_dev, file, v4l2_buf->memory); + if (ret < 0) + goto out; + if (ret > 0) + break; + + mutex_unlock(&gspca_dev->queue_lock); + + if (file->f_flags & O_NONBLOCK) return -EAGAIN; /* wait till a frame is ready */ ret = wait_event_interruptible_timeout(gspca_dev->wq, - i != atomic_read(&gspca_dev->fr_i) || - !gspca_dev->streaming || !gspca_dev->present, + frame_ready(gspca_dev, file, v4l2_buf->memory), msecs_to_jiffies(3000)); if (ret < 0) return ret; - if (ret == 0 || !gspca_dev->streaming || !gspca_dev->present) + if (ret == 0) return -EIO; + + if (mutex_lock_interruptible(&gspca_dev->queue_lock)) + return -ERESTARTSYS; } + i = gspca_dev->fr_o; + j = gspca_dev->fr_queue[i]; + frame = &gspca_dev->frame[j]; + gspca_dev->fr_o = (i + 1) % GSPCA_MAX_FRAMES; if (gspca_dev->sd_desc->dq_callback) { @@ -1867,46 +1911,7 @@ static int frame_wait(struct gspca_dev *gspca_dev, gspca_dev->sd_desc->dq_callback(gspca_dev); mutex_unlock(&gspca_dev->usb_lock); } - return gspca_dev->fr_queue[i]; -} - -/* - * dequeue a video buffer - * - * If nonblock_ing is false, block until a buffer is available. - */ -static int vidioc_dqbuf(struct file *file, void *priv, - struct v4l2_buffer *v4l2_buf) -{ - struct gspca_dev *gspca_dev = priv; - struct gspca_frame *frame; - int i, ret; - - PDEBUG(D_FRAM, "dqbuf"); - if (v4l2_buf->memory != gspca_dev->memory) - return -EINVAL; - if (!gspca_dev->present) - return -ENODEV; - - /* if not streaming, be sure the application will not loop forever */ - if (!(file->f_flags & O_NONBLOCK) - && !gspca_dev->streaming && gspca_dev->users == 1) - return -EINVAL; - - /* only the capturing file may dequeue */ - if (gspca_dev->capt_file != file) - return -EINVAL; - - /* only one dequeue / read at a time */ - if (mutex_lock_interruptible(&gspca_dev->read_lock)) - return -ERESTARTSYS; - - ret = frame_wait(gspca_dev, file->f_flags & O_NONBLOCK); - if (ret < 0) - goto out; - i = ret; /* frame index */ - frame = &gspca_dev->frame[i]; if (gspca_dev->memory == V4L2_MEMORY_USERPTR) { if (copy_to_user((__u8 __user *) frame->v4l2_buf.m.userptr, frame->data, @@ -1919,10 +1924,10 @@ static int vidioc_dqbuf(struct file *file, void *priv, } frame->v4l2_buf.flags &= ~V4L2_BUF_FLAG_DONE; memcpy(v4l2_buf, &frame->v4l2_buf, sizeof *v4l2_buf); - PDEBUG(D_FRAM, "dqbuf %d", i); + PDEBUG(D_FRAM, "dqbuf %d", j); ret = 0; out: - mutex_unlock(&gspca_dev->read_lock); + mutex_unlock(&gspca_dev->queue_lock); return ret; } @@ -2270,7 +2275,6 @@ int gspca_dev_probe2(struct usb_interface *intf, goto out; mutex_init(&gspca_dev->usb_lock); - mutex_init(&gspca_dev->read_lock); mutex_init(&gspca_dev->queue_lock); init_waitqueue_head(&gspca_dev->wq); diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 97b77a26a2e..a2a1a6aa060 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -205,7 +205,6 @@ struct gspca_dev { wait_queue_head_t wq; /* wait queue */ struct mutex usb_lock; /* usb exchange protection */ - struct mutex read_lock; /* read protection */ struct mutex queue_lock; /* ISOC queue protection */ int usb_err; /* USB error - protected by usb_lock */ u16 pkt_size; /* ISOC packet size */ -- cgit v1.2.3-70-g09d2 From 4a82bc60a9abbfca0c899366ff30c592e8020520 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 30 Dec 2010 20:00:17 -0300 Subject: [media] gspca_main: Update buffer flags even when user_copy fails Before this patch dqbuf errors out on a failing user_copy (with user pointers) before updating the buffer flags, causing a successsfully dequeued buffer to still have the DONE flag, which means that it could no longer be re-queueud (assuming the app somehow survives the segfault). Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 64ecf669d65..fbc5666ee29 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1912,6 +1912,11 @@ static int vidioc_dqbuf(struct file *file, void *priv, mutex_unlock(&gspca_dev->usb_lock); } + frame->v4l2_buf.flags &= ~V4L2_BUF_FLAG_DONE; + memcpy(v4l2_buf, &frame->v4l2_buf, sizeof *v4l2_buf); + PDEBUG(D_FRAM, "dqbuf %d", j); + ret = 0; + if (gspca_dev->memory == V4L2_MEMORY_USERPTR) { if (copy_to_user((__u8 __user *) frame->v4l2_buf.m.userptr, frame->data, @@ -1919,13 +1924,8 @@ static int vidioc_dqbuf(struct file *file, void *priv, PDEBUG(D_ERR|D_STREAM, "dqbuf cp to user failed"); ret = -EFAULT; - goto out; } } - frame->v4l2_buf.flags &= ~V4L2_BUF_FLAG_DONE; - memcpy(v4l2_buf, &frame->v4l2_buf, sizeof *v4l2_buf); - PDEBUG(D_FRAM, "dqbuf %d", j); - ret = 0; out: mutex_unlock(&gspca_dev->queue_lock); return ret; -- cgit v1.2.3-70-g09d2 From 7f6eb118df84715b128e25e99dc6a3ebc5b133d6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 30 Dec 2010 20:20:09 -0300 Subject: [media] gspca_main: Remove no longer used users variable Remove the no longer used / useful users variable, and with that gone there also is no longer a need to take queue_lock in dev_open. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 32 +++++--------------------------- drivers/media/video/gspca/gspca.h | 1 - 2 files changed, 5 insertions(+), 28 deletions(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index fbc5666ee29..0ba42dd4b99 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1210,29 +1210,15 @@ static void gspca_release(struct video_device *vfd) static int dev_open(struct file *file) { struct gspca_dev *gspca_dev; - int ret; PDEBUG(D_STREAM, "[%s] open", current->comm); gspca_dev = (struct gspca_dev *) video_devdata(file); - if (mutex_lock_interruptible(&gspca_dev->queue_lock)) - return -ERESTARTSYS; - if (!gspca_dev->present) { - ret = -ENODEV; - goto out; - } - - if (gspca_dev->users > 4) { /* (arbitrary value) */ - ret = -EBUSY; - goto out; - } + if (!gspca_dev->present) + return -ENODEV; /* protect the subdriver against rmmod */ - if (!try_module_get(gspca_dev->module)) { - ret = -ENODEV; - goto out; - } - - gspca_dev->users++; + if (!try_module_get(gspca_dev->module)) + return -ENODEV; file->private_data = gspca_dev; #ifdef GSPCA_DEBUG @@ -1244,14 +1230,7 @@ static int dev_open(struct file *file) gspca_dev->vdev.debug &= ~(V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG); #endif - ret = 0; -out: - mutex_unlock(&gspca_dev->queue_lock); - if (ret != 0) - PDEBUG(D_ERR|D_STREAM, "open failed err %d", ret); - else - PDEBUG(D_STREAM, "open done"); - return ret; + return 0; } static int dev_close(struct file *file) @@ -1261,7 +1240,6 @@ static int dev_close(struct file *file) PDEBUG(D_STREAM, "[%s] close", current->comm); if (mutex_lock_interruptible(&gspca_dev->queue_lock)) return -ERESTARTSYS; - gspca_dev->users--; /* if the file did the capture, free the streaming resources */ if (gspca_dev->capt_file == file) { diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index a2a1a6aa060..41755226d38 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -211,7 +211,6 @@ struct gspca_dev { #ifdef CONFIG_PM char frozen; /* suspend - resume */ #endif - char users; /* number of opens */ char present; /* device connected */ char nbufread; /* number of buffers for read() */ char memory; /* memory type (V4L2_MEMORY_xxx) */ -- cgit v1.2.3-70-g09d2 From d642de2ed472df308f8ee49417e29030f69b2095 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 31 Dec 2010 04:51:36 -0300 Subject: [media] gspca_main: Set memory type to GSPCA_MEMORY_NO on buffer release Before this patch we were not setting the memory type to GSPCA_MEMORY_NO when the buffers were released by the app doing a reqbufs 0. Nor would the memory type be set to GSPCA_MEMORY_NO on device close, as capture_file already is NULL on device close because of the reqbufs 0. This caused the following problem: -app1 does reqbufs USERPTR for 4 buffers -app1 does reqbufs USERPTR for 0 buffers -app2 tries to do reqbufs MMAP for 4 buffers fails because gspca_dev->memory still is USERPTR Fixing this also allows an app to switch memory type's by unrequesting the buffers and re-requesting them of a different type. This patch also moves the setting of gspca_dev->frsz and gscpa_dev->memory to after alloc_frame succeeding, so that they are not changed when allocating fails. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 0ba42dd4b99..adab34f91a6 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -508,8 +508,8 @@ static int gspca_is_compressed(__u32 format) return 0; } -static int frame_alloc(struct gspca_dev *gspca_dev, - unsigned int count) +static int frame_alloc(struct gspca_dev *gspca_dev, struct file *file, + enum v4l2_memory memory, unsigned int count) { struct gspca_frame *frame; unsigned int frsz; @@ -519,7 +519,6 @@ static int frame_alloc(struct gspca_dev *gspca_dev, frsz = gspca_dev->cam.cam_mode[i].sizeimage; PDEBUG(D_STREAM, "frame alloc frsz: %d", frsz); frsz = PAGE_ALIGN(frsz); - gspca_dev->frsz = frsz; if (count >= GSPCA_MAX_FRAMES) count = GSPCA_MAX_FRAMES - 1; gspca_dev->frbuf = vmalloc_32(frsz * count); @@ -527,6 +526,9 @@ static int frame_alloc(struct gspca_dev *gspca_dev, err("frame alloc failed"); return -ENOMEM; } + gspca_dev->capt_file = file; + gspca_dev->memory = memory; + gspca_dev->frsz = frsz; gspca_dev->nframes = count; for (i = 0; i < count; i++) { frame = &gspca_dev->frame[i]; @@ -535,7 +537,7 @@ static int frame_alloc(struct gspca_dev *gspca_dev, frame->v4l2_buf.flags = 0; frame->v4l2_buf.field = V4L2_FIELD_NONE; frame->v4l2_buf.length = frsz; - frame->v4l2_buf.memory = gspca_dev->memory; + frame->v4l2_buf.memory = memory; frame->v4l2_buf.sequence = 0; frame->data = gspca_dev->frbuf + i * frsz; frame->v4l2_buf.m.offset = i * frsz; @@ -558,6 +560,9 @@ static void frame_free(struct gspca_dev *gspca_dev) gspca_dev->frame[i].data = NULL; } gspca_dev->nframes = 0; + gspca_dev->frsz = 0; + gspca_dev->capt_file = NULL; + gspca_dev->memory = GSPCA_MEMORY_NO; } static void destroy_urbs(struct gspca_dev *gspca_dev) @@ -1250,8 +1255,6 @@ static int dev_close(struct file *file) mutex_unlock(&gspca_dev->usb_lock); } frame_free(gspca_dev); - gspca_dev->capt_file = NULL; - gspca_dev->memory = GSPCA_MEMORY_NO; } file->private_data = NULL; module_put(gspca_dev->module); @@ -1524,17 +1527,13 @@ static int vidioc_reqbufs(struct file *file, void *priv, } /* free the previous allocated buffers, if any */ - if (gspca_dev->nframes != 0) { + if (gspca_dev->nframes != 0) frame_free(gspca_dev); - gspca_dev->capt_file = NULL; - } if (rb->count == 0) /* unrequest */ goto out; - gspca_dev->memory = rb->memory; - ret = frame_alloc(gspca_dev, rb->count); + ret = frame_alloc(gspca_dev, file, rb->memory, rb->count); if (ret == 0) { rb->count = gspca_dev->nframes; - gspca_dev->capt_file = file; if (streaming) ret = gspca_init_transfer(gspca_dev); } -- cgit v1.2.3-70-g09d2 From ee3629914b2b115f00f4197e80b1e7cb12881059 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 31 Dec 2010 05:05:56 -0300 Subject: [media] gspca_main: Simplify read mode memory type checks gspca_dev->memory == GSPCA_MEMORY_NO implies gspca_dev->nframes == 0, so there is no need to check for both in dev_poll. The check in dev_read also is more complex then needed, as dqbuf which dev_read calls already does all necessary checks. Moreover dqbuf is holding the proper locks while checking where as dev_read itself is not. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index adab34f91a6..244fb76eaea 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -2019,9 +2019,7 @@ static unsigned int dev_poll(struct file *file, poll_table *wait) poll_wait(file, &gspca_dev->wq, wait); /* if reqbufs is not done, the user would use read() */ - if (gspca_dev->nframes == 0) { - if (gspca_dev->memory != GSPCA_MEMORY_NO) - return POLLERR; /* not the 1st time */ + if (gspca_dev->memory == GSPCA_MEMORY_NO) { ret = read_alloc(gspca_dev, file); if (ret != 0) return POLLERR; @@ -2053,18 +2051,10 @@ static ssize_t dev_read(struct file *file, char __user *data, PDEBUG(D_FRAM, "read (%zd)", count); if (!gspca_dev->present) return -ENODEV; - switch (gspca_dev->memory) { - case GSPCA_MEMORY_NO: /* first time */ + if (gspca_dev->memory == GSPCA_MEMORY_NO) { /* first time ? */ ret = read_alloc(gspca_dev, file); if (ret != 0) return ret; - break; - case GSPCA_MEMORY_READ: - if (gspca_dev->capt_file == file) - break; - /* fall thru */ - default: - return -EINVAL; } /* get a frame */ -- cgit v1.2.3-70-g09d2 From ce5610bca74571674c1970d33063e7c06295a9a4 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 31 Dec 2010 07:41:54 -0300 Subject: [media] gspca_main: Allow switching from read to mmap / userptr mode Some applications (xawtv, qv4l2) mix read and mmap calls. Allow switching from read mode back to mmap mode (by doing a reqbufs). Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 244fb76eaea..4ab906be896 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1497,6 +1497,7 @@ static int vidioc_reqbufs(struct file *file, void *priv, return -ERESTARTSYS; if (gspca_dev->memory != GSPCA_MEMORY_NO + && gspca_dev->memory != GSPCA_MEMORY_READ && gspca_dev->memory != rb->memory) { ret = -EBUSY; goto out; @@ -1525,6 +1526,9 @@ static int vidioc_reqbufs(struct file *file, void *priv, gspca_stream_off(gspca_dev); mutex_unlock(&gspca_dev->usb_lock); } + /* Don't restart the stream when switching from read to mmap mode */ + if (gspca_dev->memory == GSPCA_MEMORY_READ) + streaming = 0; /* free the previous allocated buffers, if any */ if (gspca_dev->nframes != 0) -- cgit v1.2.3-70-g09d2 From 0d0ae15dde7d4a778056268e64bb2625f84deab6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 31 Dec 2010 17:17:51 -0300 Subject: [media] gspca_main: wake wq on streamoff We check for not streaming as a condition to abort waiting in dqbuf, so when another thread does a streamoff we should wake the wq. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 4ab906be896..3581dea3c1f 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1634,6 +1634,8 @@ static int vidioc_streamoff(struct file *file, void *priv, gspca_dev->usb_err = 0; gspca_stream_off(gspca_dev); mutex_unlock(&gspca_dev->usb_lock); + /* In case another thread is waiting in dqbuf */ + wake_up_interruptible(&gspca_dev->wq); /* empty the transfer queues */ atomic_set(&gspca_dev->fr_q, 0); -- cgit v1.2.3-70-g09d2 From 8b064ee19d24e57d807060f50e945b5935565852 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 3 Jan 2011 12:48:10 -0300 Subject: [media] et61x251: remove wrongly claimed usb ids The et61x251 driver claims a whole list of usb id's, but it only has one sensor "module" which does sensor detection based on usb id and that only supports devices with the 102c:6251 usb id. Remove the usb-ids for other devices as for those the driver will fail with an unable to determine sensor type message anyways. Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/et61x251/et61x251.h | 24 ------------------------ 1 file changed, 24 deletions(-) diff --git a/drivers/media/video/et61x251/et61x251.h b/drivers/media/video/et61x251/et61x251.h index cc77d144df3..bf66189cb26 100644 --- a/drivers/media/video/et61x251/et61x251.h +++ b/drivers/media/video/et61x251/et61x251.h @@ -59,31 +59,7 @@ /*****************************************************************************/ static const struct usb_device_id et61x251_id_table[] = { - { USB_DEVICE(0x102c, 0x6151), }, { USB_DEVICE(0x102c, 0x6251), }, - { USB_DEVICE(0x102c, 0x6253), }, - { USB_DEVICE(0x102c, 0x6254), }, - { USB_DEVICE(0x102c, 0x6255), }, - { USB_DEVICE(0x102c, 0x6256), }, - { USB_DEVICE(0x102c, 0x6257), }, - { USB_DEVICE(0x102c, 0x6258), }, - { USB_DEVICE(0x102c, 0x6259), }, - { USB_DEVICE(0x102c, 0x625a), }, - { USB_DEVICE(0x102c, 0x625b), }, - { USB_DEVICE(0x102c, 0x625c), }, - { USB_DEVICE(0x102c, 0x625d), }, - { USB_DEVICE(0x102c, 0x625e), }, - { USB_DEVICE(0x102c, 0x625f), }, - { USB_DEVICE(0x102c, 0x6260), }, - { USB_DEVICE(0x102c, 0x6261), }, - { USB_DEVICE(0x102c, 0x6262), }, - { USB_DEVICE(0x102c, 0x6263), }, - { USB_DEVICE(0x102c, 0x6264), }, - { USB_DEVICE(0x102c, 0x6265), }, - { USB_DEVICE(0x102c, 0x6266), }, - { USB_DEVICE(0x102c, 0x6267), }, - { USB_DEVICE(0x102c, 0x6268), }, - { USB_DEVICE(0x102c, 0x6269), }, { } }; -- cgit v1.2.3-70-g09d2 From a24f0c5c47946b1a1999f44808e2219e7758d146 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 5 Jan 2011 11:36:54 -0300 Subject: [media] sn9c102: Remove not supported and non existing usb ids The sn9c102 driver claims a number of usb-ids which are for cameras with sensor types which it does not support. Also it claims a number of usb-ids which do not exist at all (not present in the windows drivers .inf files, not known by google). This patch also fixes the conflict with the gspca_sonixj driver for the 0c45:60c0 and 0c45:60fb usb ids. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/sn9c102/sn9c102_devtable.h | 66 ++++++++++++-------------- 1 file changed, 31 insertions(+), 35 deletions(-) diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h index 41064c7b5ef..74bc719b8e8 100644 --- a/drivers/media/video/sn9c102/sn9c102_devtable.h +++ b/drivers/media/video/sn9c102/sn9c102_devtable.h @@ -56,74 +56,70 @@ static const struct usb_device_id sn9c102_id_table[] = { { SN9C102_USB_DEVICE(0x0c45, 0x6029, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x602a, BRIDGE_SN9C102), }, #endif - { SN9C102_USB_DEVICE(0x0c45, 0x602b, BRIDGE_SN9C102), }, + { SN9C102_USB_DEVICE(0x0c45, 0x602b, BRIDGE_SN9C102), }, /* not in sonixb */ #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x602c, BRIDGE_SN9C102), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), }, HV7131R */ { SN9C102_USB_DEVICE(0x0c45, 0x602e, BRIDGE_SN9C102), }, #endif - { SN9C102_USB_DEVICE(0x0c45, 0x6030, BRIDGE_SN9C102), }, + { SN9C102_USB_DEVICE(0x0c45, 0x6030, BRIDGE_SN9C102), }, /* not in sonixb */ /* SN9C103 */ - { SN9C102_USB_DEVICE(0x0c45, 0x6080, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x6082, BRIDGE_SN9C103), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x6080, BRIDGE_SN9C103), }, non existent ? */ + { SN9C102_USB_DEVICE(0x0c45, 0x6082, BRIDGE_SN9C103), }, /* not in sonixb */ /* { SN9C102_USB_DEVICE(0x0c45, 0x6083, BRIDGE_SN9C103), }, HY7131D/E */ - { SN9C102_USB_DEVICE(0x0c45, 0x6088, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x608a, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x608b, BRIDGE_SN9C103), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x6088, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x608a, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x608b, BRIDGE_SN9C103), }, non existent ? */ { SN9C102_USB_DEVICE(0x0c45, 0x608c, BRIDGE_SN9C103), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), }, CISVF10 */ #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x608f, BRIDGE_SN9C103), }, #endif - { SN9C102_USB_DEVICE(0x0c45, 0x60a0, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60a2, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x60a0, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60a2, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), }, PAS106 */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), }, TAS5130 */ -/* { SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), }, TAS5130 */ - { SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), }, TAS5110, non existent */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), }, non existent ? */ { SN9C102_USB_DEVICE(0x0c45, 0x60af, BRIDGE_SN9C103), }, #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x60b0, BRIDGE_SN9C103), }, #endif - { SN9C102_USB_DEVICE(0x0c45, 0x60b2, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60b3, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60b8, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60ba, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60bb, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60bc, BRIDGE_SN9C103), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60be, BRIDGE_SN9C103), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x60b2, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60b3, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60b8, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ba, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60bb, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60bc, BRIDGE_SN9C103), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60be, BRIDGE_SN9C103), }, non existent ? */ /* SN9C105 */ #if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x045e, 0x00f5, BRIDGE_SN9C105), }, { SN9C102_USB_DEVICE(0x045e, 0x00f7, BRIDGE_SN9C105), }, { SN9C102_USB_DEVICE(0x0471, 0x0327, BRIDGE_SN9C105), }, { SN9C102_USB_DEVICE(0x0471, 0x0328, BRIDGE_SN9C105), }, -#endif { SN9C102_USB_DEVICE(0x0c45, 0x60c0, BRIDGE_SN9C105), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60c2, BRIDGE_SN9C105), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60c8, BRIDGE_SN9C105), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60cc, BRIDGE_SN9C105), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60ea, BRIDGE_SN9C105), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60ec, BRIDGE_SN9C105), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60ef, BRIDGE_SN9C105), }, - { SN9C102_USB_DEVICE(0x0c45, 0x60fa, BRIDGE_SN9C105), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x60c2, BRIDGE_SN9C105), }, PO1030 */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60c8, BRIDGE_SN9C105), }, OM6801 */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60cc, BRIDGE_SN9C105), }, HV7131GP */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ea, BRIDGE_SN9C105), }, non existent ? */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ec, BRIDGE_SN9C105), }, MO4000 */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60ef, BRIDGE_SN9C105), }, ICM105C */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x60fa, BRIDGE_SN9C105), }, OV7648 */ { SN9C102_USB_DEVICE(0x0c45, 0x60fb, BRIDGE_SN9C105), }, +#endif { SN9C102_USB_DEVICE(0x0c45, 0x60fc, BRIDGE_SN9C105), }, { SN9C102_USB_DEVICE(0x0c45, 0x60fe, BRIDGE_SN9C105), }, /* SN9C120 */ { SN9C102_USB_DEVICE(0x0458, 0x7025, BRIDGE_SN9C120), }, -#if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE - { SN9C102_USB_DEVICE(0x0c45, 0x6102, BRIDGE_SN9C120), }, -#endif - { SN9C102_USB_DEVICE(0x0c45, 0x6108, BRIDGE_SN9C120), }, - { SN9C102_USB_DEVICE(0x0c45, 0x610f, BRIDGE_SN9C120), }, +/* { SN9C102_USB_DEVICE(0x0c45, 0x6102, BRIDGE_SN9C120), }, po2030 */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x6108, BRIDGE_SN9C120), }, om6801 */ +/* { SN9C102_USB_DEVICE(0x0c45, 0x610f, BRIDGE_SN9C120), }, S5K53BEB */ #if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x6130, BRIDGE_SN9C120), }, -#endif /* { SN9C102_USB_DEVICE(0x0c45, 0x6138, BRIDGE_SN9C120), }, MO8000 */ -#if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x613a, BRIDGE_SN9C120), }, #endif { SN9C102_USB_DEVICE(0x0c45, 0x613b, BRIDGE_SN9C120), }, -- cgit v1.2.3-70-g09d2 From 0a76cb8cefbaf84465e0cd9a6a1da7f54981c8ef Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 5 Jan 2011 13:55:43 -0300 Subject: [media] gspca_sonixb: Refactor to unify bridge handling Refactor the code to unify how the sn9c101/102 and the sn9c103 bridge are handled. Also move code which is the same for all sensors from the per sensor init register settings to a central place. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 206 +++++++++++++++++++++---------------- 1 file changed, 116 insertions(+), 90 deletions(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 73504a3f87b..43784027568 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -23,8 +23,15 @@ /* Some documentation on known sonixb registers: Reg Use +sn9c101 / sn9c102: 0x10 high nibble red gain low nibble blue gain 0x11 low nibble green gain +sn9c103: +0x05 red gain 0-127 +0x06 blue gain 0-127 +0x07 green gain 0-127 +all: +0x08-0x0f i2c / 3wire registers 0x12 hstart 0x13 vstart 0x15 hsize (hsize = register-value * 16) @@ -88,12 +95,9 @@ struct sd { typedef const __u8 sensor_init_t[8]; struct sensor_data { - const __u8 *bridge_init[2]; - int bridge_init_size[2]; + const __u8 *bridge_init; sensor_init_t *sensor_init; int sensor_init_size; - sensor_init_t *sensor_bridge_init[2]; - int sensor_bridge_init_size[2]; int flags; unsigned ctrl_dis; __u8 sensor_addr; @@ -114,7 +118,6 @@ struct sensor_data { #define NO_FREQ (1 << FREQ_IDX) #define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX) -#define COMP2 0x8f #define COMP 0xc7 /* 0x87 //0x07 */ #define COMP1 0xc9 /* 0x89 //0x09 */ @@ -123,15 +126,11 @@ struct sensor_data { #define SYS_CLK 0x04 -#define SENS(bridge_1, bridge_3, sensor, sensor_1, \ - sensor_3, _flags, _ctrl_dis, _sensor_addr) \ +#define SENS(bridge, sensor, _flags, _ctrl_dis, _sensor_addr) \ { \ - .bridge_init = { bridge_1, bridge_3 }, \ - .bridge_init_size = { sizeof(bridge_1), sizeof(bridge_3) }, \ + .bridge_init = bridge, \ .sensor_init = sensor, \ .sensor_init_size = sizeof(sensor), \ - .sensor_bridge_init = { sensor_1, sensor_3,}, \ - .sensor_bridge_init_size = { sizeof(sensor_1), sizeof(sensor_3)}, \ .flags = _flags, .ctrl_dis = _ctrl_dis, .sensor_addr = _sensor_addr \ } @@ -311,7 +310,6 @@ static const __u8 initHv7131d[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x00, 0x28, 0x1e, 0x60, 0x8e, 0x42, - 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c }; static const __u8 hv7131d_sensor_init[][8] = { {0xa0, 0x11, 0x01, 0x04, 0x00, 0x00, 0x00, 0x17}, @@ -326,7 +324,6 @@ static const __u8 initHv7131r[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x01, 0x00, 0x28, 0x1e, 0x60, 0x8a, 0x20, - 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c }; static const __u8 hv7131r_sensor_init[][8] = { {0xc0, 0x11, 0x31, 0x38, 0x2a, 0x2e, 0x00, 0x10}, @@ -339,7 +336,7 @@ static const __u8 initOv6650[] = { 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b, - 0x10, 0x1d, 0x10, 0x02, 0x02, 0x09, 0x07 + 0x10, }; static const __u8 ov6650_sensor_init[][8] = { /* Bright, contrast, etc are set through SCBB interface. @@ -378,18 +375,7 @@ static const __u8 initOv7630[] = { 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r09 .. r10 */ 0x00, 0x01, 0x01, 0x0a, /* r11 .. r14 */ 0x28, 0x1e, /* H & V sizes r15 .. r16 */ - 0x68, COMP2, MCK_INIT1, /* r17 .. r19 */ - 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c /* r1a .. r1f */ -}; -static const __u8 initOv7630_3[] = { - 0x44, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, 0x80, /* r01 .. r08 */ - 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* r09 .. r10 */ - 0x00, 0x02, 0x01, 0x0a, /* r11 .. r14 */ - 0x28, 0x1e, /* H & V sizes r15 .. r16 */ 0x68, 0x8f, MCK_INIT1, /* r17 .. r19 */ - 0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c, 0x00, /* r1a .. r20 */ - 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70, 0x80, /* r21 .. r28 */ - 0x90, 0xa0, 0xb0, 0xc0, 0xd0, 0xe0, 0xf0, 0xff /* r29 .. r30 */ }; static const __u8 ov7630_sensor_init[][8] = { {0xa0, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, @@ -413,16 +399,11 @@ static const __u8 ov7630_sensor_init[][8] = { {0xd0, 0x21, 0x17, 0x1c, 0xbd, 0x06, 0xf6, 0x10}, }; -static const __u8 ov7630_sensor_init_3[][8] = { - {0xa0, 0x21, 0x13, 0x80, 0x00, 0x00, 0x00, 0x10}, -}; - static const __u8 initPas106[] = { 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x01, 0x00, 0x16, 0x12, 0x24, COMP1, MCK_INIT1, - 0x18, 0x10, 0x02, 0x02, 0x09, 0x07 }; /* compression 0x86 mckinit1 0x2b */ @@ -496,7 +477,6 @@ static const __u8 initPas202[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x03, 0x0a, 0x28, 0x1e, 0x20, 0x89, 0x20, - 0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c }; /* "Known" PAS202BCB registers: @@ -537,7 +517,6 @@ static const __u8 initTas5110c[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x45, 0x09, 0x0a, 0x16, 0x12, 0x60, 0x86, 0x2b, - 0x14, 0x0a, 0x02, 0x02, 0x09, 0x07 }; /* Same as above, except a different hstart */ static const __u8 initTas5110d[] = { @@ -545,7 +524,6 @@ static const __u8 initTas5110d[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x09, 0x0a, 0x16, 0x12, 0x60, 0x86, 0x2b, - 0x14, 0x0a, 0x02, 0x02, 0x09, 0x07 }; static const __u8 tas5110_sensor_init[][8] = { {0x30, 0x11, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x10}, @@ -558,7 +536,6 @@ static const __u8 initTas5130[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x68, 0x0c, 0x0a, 0x28, 0x1e, 0x60, COMP, MCK_INIT, - 0x18, 0x10, 0x04, 0x03, 0x11, 0x0c }; static const __u8 tas5130_sensor_init[][8] = { /* {0x30, 0x11, 0x00, 0x40, 0x47, 0x00, 0x00, 0x10}, @@ -569,21 +546,17 @@ static const __u8 tas5130_sensor_init[][8] = { }; static struct sensor_data sensor_data[] = { -SENS(initHv7131d, NULL, hv7131d_sensor_init, NULL, NULL, F_GAIN, NO_BRIGHTNESS|NO_FREQ, 0), -SENS(initHv7131r, NULL, hv7131r_sensor_init, NULL, NULL, 0, NO_BRIGHTNESS|NO_EXPO|NO_FREQ, 0), -SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60), -SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3, - F_GAIN, 0, 0x21), -SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_GAIN|F_SIF, NO_FREQ, - 0), -SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, F_GAIN, - NO_FREQ, 0), -SENS(initTas5110c, NULL, tas5110_sensor_init, NULL, NULL, - F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0), -SENS(initTas5110d, NULL, tas5110_sensor_init, NULL, NULL, - F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0), -SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, - 0), +SENS(initHv7131d, hv7131d_sensor_init, F_GAIN, NO_BRIGHTNESS|NO_FREQ, 0), +SENS(initHv7131r, hv7131r_sensor_init, 0, NO_BRIGHTNESS|NO_EXPO|NO_FREQ, 0), +SENS(initOv6650, ov6650_sensor_init, F_GAIN|F_SIF, 0, 0x60), +SENS(initOv7630, ov7630_sensor_init, F_GAIN, 0, 0x21), +SENS(initPas106, pas106_sensor_init, F_GAIN|F_SIF, NO_FREQ, 0), +SENS(initPas202, pas202_sensor_init, F_GAIN, NO_FREQ, 0), +SENS(initTas5110c, tas5110_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, + NO_BRIGHTNESS|NO_FREQ, 0), +SENS(initTas5110d, tas5110_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, + NO_BRIGHTNESS|NO_FREQ, 0), +SENS(initTas5130, tas5130_sensor_init, 0, NO_EXPO|NO_FREQ, 0), }; /* get one byte in gspca_dev->usb_buf */ @@ -796,7 +769,7 @@ static void setgain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; __u8 gain; - __u8 buf[2] = { 0, 0 }; + __u8 buf[3] = { 0, 0, 0 }; if (sensor_data[sd->sensor].flags & F_GAIN) { /* Use the sensor gain to do the actual gain */ @@ -804,13 +777,18 @@ static void setgain(struct gspca_dev *gspca_dev) return; } - gain = sd->gain >> 4; - - /* red and blue gain */ - buf[0] = gain << 4 | gain; - /* green gain */ - buf[1] = gain; - reg_w(gspca_dev, 0x10, buf, 2); + if (sd->bridge == BRIDGE_103) { + gain = sd->gain >> 1; + buf[0] = gain; /* Red */ + buf[1] = gain; /* Green */ + buf[2] = gain; /* Blue */ + reg_w(gspca_dev, 0x05, buf, 3); + } else { + gain = sd->gain >> 4; + buf[0] = gain << 4 | gain; /* Red and blue */ + buf[1] = gain; /* Green */ + reg_w(gspca_dev, 0x10, buf, 2); + } } static void setexposure(struct gspca_dev *gspca_dev) @@ -1127,53 +1105,91 @@ static int sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; struct cam *cam = &gspca_dev->cam; - int mode, l; - const __u8 *sn9c10x; - __u8 reg12_19[8]; + int i, mode; + __u8 regs[0x31]; mode = cam->cam_mode[gspca_dev->curr_mode].priv & 0x07; - sn9c10x = sensor_data[sd->sensor].bridge_init[sd->bridge]; - l = sensor_data[sd->sensor].bridge_init_size[sd->bridge]; - memcpy(reg12_19, &sn9c10x[0x12 - 1], 8); - reg12_19[6] = sn9c10x[0x18 - 1] | (mode << 4); - /* Special cases where reg 17 and or 19 value depends on mode */ + /* Copy registers 0x01 - 0x19 from the template */ + memcpy(®s[0x01], sensor_data[sd->sensor].bridge_init, 0x19); + /* Set the mode */ + regs[0x18] |= mode << 4; + + /* Set bridge gain to 1.0 */ + if (sd->bridge == BRIDGE_103) { + regs[0x05] = 0x20; /* Red */ + regs[0x06] = 0x20; /* Green */ + regs[0x07] = 0x20; /* Blue */ + } else { + regs[0x10] = 0x00; /* Red and blue */ + regs[0x11] = 0x00; /* Green */ + } + + /* Setup pixel numbers and auto exposure window */ + if (sensor_data[sd->sensor].flags & F_SIF) { + regs[0x1a] = 0x14; /* HO_SIZE 640, makes no sense */ + regs[0x1b] = 0x0a; /* VO_SIZE 320, makes no sense */ + regs[0x1c] = 0x02; /* AE H-start 64 */ + regs[0x1d] = 0x02; /* AE V-start 64 */ + regs[0x1e] = 0x09; /* AE H-end 288 */ + regs[0x1f] = 0x07; /* AE V-end 224 */ + } else { + regs[0x1a] = 0x1d; /* HO_SIZE 960, makes no sense */ + regs[0x1b] = 0x10; /* VO_SIZE 512, makes no sense */ + regs[0x1c] = 0x02; /* AE H-start 64 */ + regs[0x1d] = 0x03; /* AE V-start 96 */ + regs[0x1e] = 0x0f; /* AE H-end 480 */ + regs[0x1f] = 0x0c; /* AE V-end 384 */ + } + + /* Setup the gamma table (only used with the sn9c103 bridge) */ + for (i = 0; i < 16; i++) + regs[0x20 + i] = i * 16; + regs[0x20 + i] = 255; + + /* Special cases where some regs depend on mode or bridge */ switch (sd->sensor) { case SENSOR_TAS5130CXX: - /* probably not mode specific at all most likely the upper + /* FIXME / TESTME + probably not mode specific at all most likely the upper nibble of 0x19 is exposure (clock divider) just as with the tas5110, we need someone to test this. */ - reg12_19[7] = mode ? 0x23 : 0x43; + regs[0x19] = mode ? 0x23 : 0x43; break; + case SENSOR_OV7630: + /* FIXME / TESTME for some reason with the 101/102 bridge the + clock is set to 12 Mhz (reg1 == 0x04), rather then 24. + Also the hstart needs to go from 1 to 2 when using a 103, + which is likely related. This does not seem right. */ + if (sd->bridge == BRIDGE_103) { + regs[0x01] = 0x44; /* Select 24 Mhz clock */ + regs[0x12] = 0x02; /* Set hstart to 2 */ + } } /* Disable compression when the raw bayer format has been selected */ if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) - reg12_19[6] &= ~0x80; + regs[0x18] &= ~0x80; /* Vga mode emulation on SIF sensor? */ if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_REDUCED_SIF) { - reg12_19[0] += 16; /* 0x12: hstart adjust */ - reg12_19[1] += 24; /* 0x13: vstart adjust */ - reg12_19[3] = 320 / 16; /* 0x15: hsize */ - reg12_19[4] = 240 / 16; /* 0x16: vsize */ + regs[0x12] += 16; /* hstart adjust */ + regs[0x13] += 24; /* vstart adjust */ + regs[0x15] = 320 / 16; /* hsize */ + regs[0x16] = 240 / 16; /* vsize */ } /* reg 0x01 bit 2 video transfert on */ - reg_w(gspca_dev, 0x01, &sn9c10x[0x01 - 1], 1); + reg_w(gspca_dev, 0x01, ®s[0x01], 1); /* reg 0x17 SensorClk enable inv Clk 0x60 */ - reg_w(gspca_dev, 0x17, &sn9c10x[0x17 - 1], 1); + reg_w(gspca_dev, 0x17, ®s[0x17], 1); /* Set the registers from the template */ - reg_w(gspca_dev, 0x01, sn9c10x, l); + reg_w(gspca_dev, 0x01, ®s[0x01], + (sd->bridge == BRIDGE_103) ? 0x30 : 0x1f); /* Init the sensor */ i2c_w_vector(gspca_dev, sensor_data[sd->sensor].sensor_init, sensor_data[sd->sensor].sensor_init_size); - if (sensor_data[sd->sensor].sensor_bridge_init[sd->bridge]) - i2c_w_vector(gspca_dev, - sensor_data[sd->sensor].sensor_bridge_init[sd->bridge], - sensor_data[sd->sensor].sensor_bridge_init_size[ - sd->bridge]); - /* Mode specific sensor setup */ + /* Mode / bridge specific sensor setup */ switch (sd->sensor) { case SENSOR_PAS202: { const __u8 i2cpclockdiv[] = @@ -1181,27 +1197,37 @@ static int sd_start(struct gspca_dev *gspca_dev) /* clockdiv from 4 to 3 (7.5 -> 10 fps) when in low res mode */ if (mode) i2c_w(gspca_dev, i2cpclockdiv); + break; } + case SENSOR_OV7630: + /* FIXME / TESTME We should be able to handle this identical + for the 101/102 and the 103 case */ + if (sd->bridge == BRIDGE_103) { + const __u8 i2c[] = { 0xa0, 0x21, 0x13, + 0x80, 0x00, 0x00, 0x00, 0x10 }; + i2c_w(gspca_dev, i2c); + } + break; } /* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */ - reg_w(gspca_dev, 0x15, ®12_19[3], 2); + reg_w(gspca_dev, 0x15, ®s[0x15], 2); /* compression register */ - reg_w(gspca_dev, 0x18, ®12_19[6], 1); + reg_w(gspca_dev, 0x18, ®s[0x18], 1); /* H_start */ - reg_w(gspca_dev, 0x12, ®12_19[0], 1); + reg_w(gspca_dev, 0x12, ®s[0x12], 1); /* V_START */ - reg_w(gspca_dev, 0x13, ®12_19[1], 1); + reg_w(gspca_dev, 0x13, ®s[0x13], 1); /* reset 0x17 SensorClk enable inv Clk 0x60 */ /*fixme: ov7630 [17]=68 8f (+20 if 102)*/ - reg_w(gspca_dev, 0x17, ®12_19[5], 1); + reg_w(gspca_dev, 0x17, ®s[0x17], 1); /*MCKSIZE ->3 */ /*fixme: not ov7630*/ - reg_w(gspca_dev, 0x19, ®12_19[7], 1); + reg_w(gspca_dev, 0x19, ®s[0x19], 1); /* AE_STRX AE_STRY AE_ENDX AE_ENDY */ - reg_w(gspca_dev, 0x1c, &sn9c10x[0x1c - 1], 4); + reg_w(gspca_dev, 0x1c, ®s[0x1c], 4); /* Enable video transfert */ - reg_w(gspca_dev, 0x01, &sn9c10x[0], 1); + reg_w(gspca_dev, 0x01, ®s[0x01], 1); /* Compression */ - reg_w(gspca_dev, 0x18, ®12_19[6], 2); + reg_w(gspca_dev, 0x18, ®s[0x18], 2); msleep(20); sd->reg11 = -1; -- cgit v1.2.3-70-g09d2 From f913c001cd6084db0e3486b832234d2fe4513ff6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 5 Jan 2011 16:01:16 -0300 Subject: [media] gspca_sonixb: Adjust autoexposure window for vga cams so that it is centered Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 43784027568..e88097f3d7e 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -1027,7 +1027,7 @@ static void do_autogain(struct gspca_dev *gspca_dev) desired_avg_lum = 5000; } else { deadzone = 1500; - desired_avg_lum = 18000; + desired_avg_lum = 13000; } if (sensor_data[sd->sensor].flags & F_COARSE_EXPO) @@ -1135,7 +1135,7 @@ static int sd_start(struct gspca_dev *gspca_dev) } else { regs[0x1a] = 0x1d; /* HO_SIZE 960, makes no sense */ regs[0x1b] = 0x10; /* VO_SIZE 512, makes no sense */ - regs[0x1c] = 0x02; /* AE H-start 64 */ + regs[0x1c] = 0x05; /* AE H-start 160 */ regs[0x1d] = 0x03; /* AE V-start 96 */ regs[0x1e] = 0x0f; /* AE H-end 480 */ regs[0x1f] = 0x0c; /* AE V-end 384 */ -- cgit v1.2.3-70-g09d2 From 0d0d7ef71ec6ba6abb680478f7d0514584b8277f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 6 Jan 2011 07:55:20 -0300 Subject: [media] gspca_sonixb: Fix TAS5110D sensor gain control Also fix the issue of the image being mirrored. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 36 ++++++++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index e88097f3d7e..5c8420e5c02 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -525,10 +525,18 @@ static const __u8 initTas5110d[] = { 0x00, 0x00, 0x00, 0x41, 0x09, 0x0a, 0x16, 0x12, 0x60, 0x86, 0x2b, }; -static const __u8 tas5110_sensor_init[][8] = { +/* tas5110c is 3 wire, tas5110d is 2 wire (regular i2c) */ +static const __u8 tas5110c_sensor_init[][8] = { {0x30, 0x11, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x10}, {0x30, 0x11, 0x02, 0x20, 0xa9, 0x00, 0x00, 0x10}, - {0xa0, 0x61, 0x9a, 0xca, 0x00, 0x00, 0x00, 0x17}, +}; +/* Known TAS5110D registers + * reg02: gain, bit order reversed!! 0 == max gain, 255 == min gain + * reg03: bit3: vflip, bit4: ~hflip, bit7: ~gainboost (~ == inverted) + * Note: writing reg03 seems to only work when written together with 02 + */ +static const __u8 tas5110d_sensor_init[][8] = { + {0xa0, 0x61, 0x9a, 0xca, 0x00, 0x00, 0x00, 0x17}, /* reset */ }; static const __u8 initTas5130[] = { @@ -552,9 +560,9 @@ SENS(initOv6650, ov6650_sensor_init, F_GAIN|F_SIF, 0, 0x60), SENS(initOv7630, ov7630_sensor_init, F_GAIN, 0, 0x21), SENS(initPas106, pas106_sensor_init, F_GAIN|F_SIF, NO_FREQ, 0), SENS(initPas202, pas202_sensor_init, F_GAIN, NO_FREQ, 0), -SENS(initTas5110c, tas5110_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, +SENS(initTas5110c, tas5110c_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0), -SENS(initTas5110d, tas5110_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, +SENS(initTas5110d, tas5110d_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0), SENS(initTas5130, tas5130_sensor_init, 0, NO_EXPO|NO_FREQ, 0), }; @@ -705,8 +713,7 @@ static void setsensorgain(struct gspca_dev *gspca_dev) goto err; break; } - case SENSOR_TAS5110C: - case SENSOR_TAS5110D: { + case SENSOR_TAS5110C: { __u8 i2c[] = {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10}; @@ -715,6 +722,23 @@ static void setsensorgain(struct gspca_dev *gspca_dev) goto err; break; } + case SENSOR_TAS5110D: { + __u8 i2c[] = { + 0xb0, 0x61, 0x02, 0x00, 0x10, 0x00, 0x00, 0x17 }; + gain = 255 - gain; + /* The bits in the register are the wrong way around!! */ + i2c[3] |= (gain & 0x80) >> 7; + i2c[3] |= (gain & 0x40) >> 5; + i2c[3] |= (gain & 0x20) >> 3; + i2c[3] |= (gain & 0x10) >> 1; + i2c[3] |= (gain & 0x08) << 1; + i2c[3] |= (gain & 0x04) << 3; + i2c[3] |= (gain & 0x02) << 5; + i2c[3] |= (gain & 0x01) << 7; + if (i2c_w(gspca_dev, i2c) < 0) + goto err; + break; + } case SENSOR_OV6650: gain >>= 1; -- cgit v1.2.3-70-g09d2 From 4e17cd2eac2544267bdfab67655be468f80f50c6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 6 Jan 2011 10:58:53 -0300 Subject: [media] gspca_sonixb: TAS5130C brightness control really is a gain control Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 5c8420e5c02..36253417bde 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -564,7 +564,8 @@ SENS(initTas5110c, tas5110c_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0), SENS(initTas5110d, tas5110d_sensor_init, F_GAIN|F_SIF|F_COARSE_EXPO, NO_BRIGHTNESS|NO_FREQ, 0), -SENS(initTas5130, tas5130_sensor_init, 0, NO_EXPO|NO_FREQ, 0), +SENS(initTas5130, tas5130_sensor_init, F_GAIN, + NO_BRIGHTNESS|NO_EXPO|NO_FREQ, 0), }; /* get one byte in gspca_dev->usb_buf */ @@ -636,7 +637,6 @@ static void i2c_w_vector(struct gspca_dev *gspca_dev, static void setbrightness(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - __u8 value; switch (sd->sensor) { case SENSOR_OV6650: @@ -678,17 +678,6 @@ static void setbrightness(struct gspca_dev *gspca_dev) goto err; break; } - case SENSOR_TAS5130CXX: { - __u8 i2c[] = - {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10}; - - value = 0xff - sd->brightness; - i2c[4] = value; - PDEBUG(D_CONF, "brightness %d : %d", value, i2c[4]); - if (i2c_w(gspca_dev, i2c) < 0) - goto err; - break; - } } return; err: @@ -713,7 +702,8 @@ static void setsensorgain(struct gspca_dev *gspca_dev) goto err; break; } - case SENSOR_TAS5110C: { + case SENSOR_TAS5110C: + case SENSOR_TAS5130CXX: { __u8 i2c[] = {0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10}; -- cgit v1.2.3-70-g09d2 From 69ffd2545766742f7d247770c6ee30a6ed6058ef Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 6 Jan 2011 11:56:30 -0300 Subject: [media] gspca_sonixb: Add usb ids for known sn9c103 cameras Now that our bridge code is unified for sn9c101/102 and sn9c103 models, the sn9c103 models should simply work, given that the only difference in the sn9c103 is audio support and a gamma correction table. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 12 ++++++++---- drivers/media/video/sn9c102/sn9c102_devtable.h | 8 +++----- 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index 36253417bde..c2013114760 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -1572,8 +1572,8 @@ static const struct usb_device_id device_table[] __devinitconst = { {USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)}, {USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)}, {USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)}, -#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x6019), SB(OV7630, 101)}, +#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x6024), SB(TAS5130CXX, 102)}, {USB_DEVICE(0x0c45, 0x6025), SB(TAS5130CXX, 102)}, #endif @@ -1584,11 +1584,15 @@ static const struct usb_device_id device_table[] __devinitconst = { {USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)}, {USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)}, {USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)}, - /* {USB_DEVICE(0x0c45, 0x602b), SB(MI03XX, 102)}, */ /* MI0343 MI0360 MI0330 */ + /* {USB_DEVICE(0x0c45, 0x6030), SB(MI03XX, 102)}, */ /* MI0343 MI0360 MI0330 */ + /* {USB_DEVICE(0x0c45, 0x6082), SB(MI03XX, 103)}, */ /* MI0343 MI0360 */ + {USB_DEVICE(0x0c45, 0x6083), SB(HV7131D, 103)}, + {USB_DEVICE(0x0c45, 0x608c), SB(HV7131R, 103)}, + /* {USB_DEVICE(0x0c45, 0x608e), SB(CISVF10, 103)}, */ {USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)}, -#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE + {USB_DEVICE(0x0c45, 0x60a8), SB(PAS106, 103)}, + {USB_DEVICE(0x0c45, 0x60aa), SB(TAS5130CXX, 103)}, {USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)}, -#endif {USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)}, {} }; diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h index 74bc719b8e8..0e0fcc017fb 100644 --- a/drivers/media/video/sn9c102/sn9c102_devtable.h +++ b/drivers/media/video/sn9c102/sn9c102_devtable.h @@ -47,8 +47,8 @@ static const struct usb_device_id sn9c102_id_table[] = { { SN9C102_USB_DEVICE(0x0c45, 0x6009, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x6011, BRIDGE_SN9C102), }, OV6650 */ -#endif { SN9C102_USB_DEVICE(0x0c45, 0x6019, BRIDGE_SN9C102), }, +#endif { SN9C102_USB_DEVICE(0x0c45, 0x6024, BRIDGE_SN9C102), }, { SN9C102_USB_DEVICE(0x0c45, 0x6025, BRIDGE_SN9C102), }, #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE @@ -66,15 +66,14 @@ static const struct usb_device_id sn9c102_id_table[] = { /* SN9C103 */ /* { SN9C102_USB_DEVICE(0x0c45, 0x6080, BRIDGE_SN9C103), }, non existent ? */ { SN9C102_USB_DEVICE(0x0c45, 0x6082, BRIDGE_SN9C103), }, /* not in sonixb */ +#if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE /* { SN9C102_USB_DEVICE(0x0c45, 0x6083, BRIDGE_SN9C103), }, HY7131D/E */ /* { SN9C102_USB_DEVICE(0x0c45, 0x6088, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x608a, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x608b, BRIDGE_SN9C103), }, non existent ? */ { SN9C102_USB_DEVICE(0x0c45, 0x608c, BRIDGE_SN9C103), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), }, CISVF10 */ -#if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x608f, BRIDGE_SN9C103), }, -#endif /* { SN9C102_USB_DEVICE(0x0c45, 0x60a0, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60a2, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), }, non existent ? */ @@ -84,9 +83,7 @@ static const struct usb_device_id sn9c102_id_table[] = { /* { SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), }, non existent ? */ { SN9C102_USB_DEVICE(0x0c45, 0x60af, BRIDGE_SN9C103), }, -#if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x60b0, BRIDGE_SN9C103), }, -#endif /* { SN9C102_USB_DEVICE(0x0c45, 0x60b2, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60b3, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60b8, BRIDGE_SN9C103), }, non existent ? */ @@ -94,6 +91,7 @@ static const struct usb_device_id sn9c102_id_table[] = { /* { SN9C102_USB_DEVICE(0x0c45, 0x60bb, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60bc, BRIDGE_SN9C103), }, non existent ? */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60be, BRIDGE_SN9C103), }, non existent ? */ +#endif /* SN9C105 */ #if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x045e, 0x00f5, BRIDGE_SN9C105), }, -- cgit v1.2.3-70-g09d2 From 4944e27d85ed8e5ccd591687546d56d111c5cc98 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 6 Jan 2011 13:05:29 -0300 Subject: [media] gspca_sonixj: Enable more usb ids when sn9c102 gets compiled too Both we and the windows driver make no sensor specific differences (with some exceptions) for different sonixj bridge types. Thus if a sn9c105 bridge has been successfully tested with a sensor, the same sensor can be successfully used with a sn9c120 bridge too. Using this knowledge we can move over most usb-ids too the sonixj driver when both are compiled. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 6 +----- drivers/media/video/sn9c102/sn9c102_devtable.h | 6 ++---- 2 files changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 2d0bb17a30a..85716f864cf 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -2908,10 +2908,8 @@ static const struct sd_desc sd_desc = { | (SENSOR_ ## sensor << 8) \ | (flags) static const __devinitdata struct usb_device_id device_table[] = { -#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)}, {USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)}, -#endif {USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, PDN_INV)}, {USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, PDN_INV)}, {USB_DEVICE(0x0471, 0x0327), BS(SN9C105, MI0360)}, @@ -2936,8 +2934,8 @@ static const __devinitdata struct usb_device_id device_table[] = { /* {USB_DEVICE(0x0c45, 0x60fa), BS(SN9C105, OV7648)}, */ /* {USB_DEVICE(0x0c45, 0x60f2), BS(SN9C105, OV7660)}, */ {USB_DEVICE(0x0c45, 0x60fb), BS(SN9C105, OV7660)}, -#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x60fc), BS(SN9C105, HV7131R)}, +#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x60fe), BS(SN9C105, OV7630)}, #endif {USB_DEVICE(0x0c45, 0x6100), BS(SN9C120, MI0360)}, /*sn9c128*/ @@ -2962,9 +2960,7 @@ static const __devinitdata struct usb_device_id device_table[] = { /* {USB_DEVICE(0x0c45, 0x6132), BS(SN9C120, OV7670)}, */ {USB_DEVICE(0x0c45, 0x6138), BS(SN9C120, MO4000)}, {USB_DEVICE(0x0c45, 0x613a), BS(SN9C120, OV7648)}, -#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x613b), BS(SN9C120, OV7660)}, -#endif {USB_DEVICE(0x0c45, 0x613c), BS(SN9C120, HV7131R)}, {USB_DEVICE(0x0c45, 0x613e), BS(SN9C120, OV7630)}, {USB_DEVICE(0x0c45, 0x6142), BS(SN9C120, PO2030N)}, /*sn9c120b*/ diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h index 0e0fcc017fb..97e123672d6 100644 --- a/drivers/media/video/sn9c102/sn9c102_devtable.h +++ b/drivers/media/video/sn9c102/sn9c102_devtable.h @@ -107,21 +107,19 @@ static const struct usb_device_id sn9c102_id_table[] = { /* { SN9C102_USB_DEVICE(0x0c45, 0x60ef, BRIDGE_SN9C105), }, ICM105C */ /* { SN9C102_USB_DEVICE(0x0c45, 0x60fa, BRIDGE_SN9C105), }, OV7648 */ { SN9C102_USB_DEVICE(0x0c45, 0x60fb, BRIDGE_SN9C105), }, -#endif { SN9C102_USB_DEVICE(0x0c45, 0x60fc, BRIDGE_SN9C105), }, +#endif { SN9C102_USB_DEVICE(0x0c45, 0x60fe, BRIDGE_SN9C105), }, /* SN9C120 */ +#if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x0458, 0x7025, BRIDGE_SN9C120), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x6102, BRIDGE_SN9C120), }, po2030 */ /* { SN9C102_USB_DEVICE(0x0c45, 0x6108, BRIDGE_SN9C120), }, om6801 */ /* { SN9C102_USB_DEVICE(0x0c45, 0x610f, BRIDGE_SN9C120), }, S5K53BEB */ -#if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x6130, BRIDGE_SN9C120), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x6138, BRIDGE_SN9C120), }, MO8000 */ { SN9C102_USB_DEVICE(0x0c45, 0x613a, BRIDGE_SN9C120), }, -#endif { SN9C102_USB_DEVICE(0x0c45, 0x613b, BRIDGE_SN9C120), }, -#if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x0c45, 0x613c, BRIDGE_SN9C120), }, { SN9C102_USB_DEVICE(0x0c45, 0x613e, BRIDGE_SN9C120), }, #endif -- cgit v1.2.3-70-g09d2 From e530a5e3cfe5f2dca35552d2d968f0a3fc115968 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 6 Jan 2011 15:23:55 -0300 Subject: [media] gspca_sonixj: Probe sensor type independent of bridge type Looking at the windows inf file, for usb ids with a sensor type where probing is needed to determine the type (for example ov7630 or soi768), this is needed for all bridge variants with a usb id indicating this sensor type. So do the probing to determine the actual sensor type for types where the usb-id info is not 100% deterministic, independent of the bridge type. If you look through the list of currently active usb ids in sonixj, this effectively only changes the code path for 0c45:60fe (sn9c105 + ov7630) and 0c45:612e (sn9c110 + ov7630), which according to the inf file can have a soi768 instead of a ov7630 just like the sn9c120 + ov7630 models where we already probe for a soi7630. The main reason for this code change is to keep the code paths as bridge variant independent as possible, so that we don't need a lot of special per bridge cases, as we enable more usb-ids in the future. This change makes the 0c45:60fe code path identical to the successfully tested 0c45:613e, so also make sonixj the default driver for 0c45:60fe. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 58 +++++++++++++------------- drivers/media/video/sn9c102/sn9c102_devtable.h | 2 - 2 files changed, 29 insertions(+), 31 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 85716f864cf..efe3fc7b6b7 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -1822,44 +1822,46 @@ static int sd_init(struct gspca_dev *gspca_dev) PDEBUG(D_PROBE, "Sonix chip id: %02x", regF1); switch (sd->bridge) { case BRIDGE_SN9C102P: + case BRIDGE_SN9C105: if (regF1 != 0x11) return -ENODEV; + break; + default: +/* case BRIDGE_SN9C110: */ +/* case BRIDGE_SN9C120: */ + if (regF1 != 0x12) + return -ENODEV; + } + + switch (sd->sensor) { + case SENSOR_MI0360: + mi0360_probe(gspca_dev); + break; + case SENSOR_OV7630: + ov7630_probe(gspca_dev); + break; + case SENSOR_OV7648: + ov7648_probe(gspca_dev); + break; + case SENSOR_PO2030N: + po2030n_probe(gspca_dev); + break; + } + + switch (sd->bridge) { + case BRIDGE_SN9C102P: reg_w1(gspca_dev, 0x02, regGpio[1]); break; case BRIDGE_SN9C105: - if (regF1 != 0x11) - return -ENODEV; - if (sd->sensor == SENSOR_MI0360) - mi0360_probe(gspca_dev); reg_w(gspca_dev, 0x01, regGpio, 2); break; + case BRIDGE_SN9C110: + reg_w1(gspca_dev, 0x02, 0x62); + break; case BRIDGE_SN9C120: - if (regF1 != 0x12) - return -ENODEV; - switch (sd->sensor) { - case SENSOR_MI0360: - mi0360_probe(gspca_dev); - break; - case SENSOR_OV7630: - ov7630_probe(gspca_dev); - break; - case SENSOR_OV7648: - ov7648_probe(gspca_dev); - break; - case SENSOR_PO2030N: - po2030n_probe(gspca_dev); - break; - } regGpio[1] = 0x70; /* no audio */ reg_w(gspca_dev, 0x01, regGpio, 2); break; - default: -/* case BRIDGE_SN9C110: */ -/* case BRIDGE_SN9C325: */ - if (regF1 != 0x12) - return -ENODEV; - reg_w1(gspca_dev, 0x02, 0x62); - break; } if (sd->sensor == SENSOR_OM6802) @@ -2935,9 +2937,7 @@ static const __devinitdata struct usb_device_id device_table[] = { /* {USB_DEVICE(0x0c45, 0x60f2), BS(SN9C105, OV7660)}, */ {USB_DEVICE(0x0c45, 0x60fb), BS(SN9C105, OV7660)}, {USB_DEVICE(0x0c45, 0x60fc), BS(SN9C105, HV7131R)}, -#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE {USB_DEVICE(0x0c45, 0x60fe), BS(SN9C105, OV7630)}, -#endif {USB_DEVICE(0x0c45, 0x6100), BS(SN9C120, MI0360)}, /*sn9c128*/ {USB_DEVICE(0x0c45, 0x6102), BS(SN9C120, PO2030N)}, /* /GC0305*/ /* {USB_DEVICE(0x0c45, 0x6108), BS(SN9C120, OM6802)}, */ diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h index 97e123672d6..b3d2cc72965 100644 --- a/drivers/media/video/sn9c102/sn9c102_devtable.h +++ b/drivers/media/video/sn9c102/sn9c102_devtable.h @@ -108,10 +108,8 @@ static const struct usb_device_id sn9c102_id_table[] = { /* { SN9C102_USB_DEVICE(0x0c45, 0x60fa, BRIDGE_SN9C105), }, OV7648 */ { SN9C102_USB_DEVICE(0x0c45, 0x60fb, BRIDGE_SN9C105), }, { SN9C102_USB_DEVICE(0x0c45, 0x60fc, BRIDGE_SN9C105), }, -#endif { SN9C102_USB_DEVICE(0x0c45, 0x60fe, BRIDGE_SN9C105), }, /* SN9C120 */ -#if !defined CONFIG_USB_GSPCA_SONIXJ && !defined CONFIG_USB_GSPCA_SONIXJ_MODULE { SN9C102_USB_DEVICE(0x0458, 0x7025, BRIDGE_SN9C120), }, /* { SN9C102_USB_DEVICE(0x0c45, 0x6102, BRIDGE_SN9C120), }, po2030 */ /* { SN9C102_USB_DEVICE(0x0c45, 0x6108, BRIDGE_SN9C120), }, om6801 */ -- cgit v1.2.3-70-g09d2 From e48d38f7f100f37edc873df1b3a1d15ee3575874 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 6 Jan 2011 16:21:57 -0300 Subject: [media] gspca_sonixj: Add one more commented out usb-id While going through windows inf file I found more usb-id, add a comment with this id for future reference. Signed-off-by: Hans de Goede Acked-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index efe3fc7b6b7..db35391d00e 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -2968,6 +2968,7 @@ static const __devinitdata struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x6143), BS(SN9C120, SP80708)}, /*sn9c120b*/ {USB_DEVICE(0x0c45, 0x6148), BS(SN9C120, OM6802)}, /*sn9c120b*/ {USB_DEVICE(0x0c45, 0x614a), BS(SN9C120, ADCM1700)}, /*sn9c120b*/ +/* {USB_DEVICE(0x0c45, 0x614c), BS(SN9C120, GC0306)}, */ /*sn9c120b*/ {} }; MODULE_DEVICE_TABLE(usb, device_table); -- cgit v1.2.3-70-g09d2 From 4c775902252b06673cf26a33834842f1fec3fe3e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 7 Jan 2011 07:29:24 -0300 Subject: [media] gspca_sonixb: Fix mirrored image with ov7630 Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index c2013114760..e45d1cfb446 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -381,7 +381,7 @@ static const __u8 ov7630_sensor_init[][8] = { {0xa0, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, {0xb0, 0x21, 0x01, 0x77, 0x3a, 0x00, 0x00, 0x10}, /* {0xd0, 0x21, 0x12, 0x7c, 0x01, 0x80, 0x34, 0x10}, jfm */ - {0xd0, 0x21, 0x12, 0x1c, 0x00, 0x80, 0x34, 0x10}, /* jfm */ + {0xd0, 0x21, 0x12, 0x5c, 0x00, 0x80, 0x34, 0x10}, /* jfm */ {0xa0, 0x21, 0x1b, 0x04, 0x00, 0x80, 0x34, 0x10}, {0xa0, 0x21, 0x20, 0x44, 0x00, 0x80, 0x34, 0x10}, {0xa0, 0x21, 0x23, 0xee, 0x00, 0x80, 0x34, 0x10}, -- cgit v1.2.3-70-g09d2 From a1198ccf9c52922e66a3372b0045ebe335a127dd Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 8 Jan 2011 09:53:32 -0300 Subject: [media] v4l2-ioctl: fix incorrect error code if VIDIOC_DBG_G/S_REGISTER are unsupported The ioctls VIDIOC_DBG_S_REGISTER and VIDIOC_DBG_G_REGISTER should return -EINVAL if the driver didn't implement them. Currently they return -EPERM if called as non-root user. However, this check should only be done if the driver actually implemented these ioctls. Otherwise, just return -EINVAL as we do with all unimplemented ioctls. This bug make the v4l2-compliance test suite fail. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ioctl.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 7e47f15f350..f51327ef675 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -1659,20 +1659,24 @@ static long __video_do_ioctl(struct file *file, { struct v4l2_dbg_register *p = arg; - if (!capable(CAP_SYS_ADMIN)) - ret = -EPERM; - else if (ops->vidioc_g_register) - ret = ops->vidioc_g_register(file, fh, p); + if (ops->vidioc_g_register) { + if (!capable(CAP_SYS_ADMIN)) + ret = -EPERM; + else + ret = ops->vidioc_g_register(file, fh, p); + } break; } case VIDIOC_DBG_S_REGISTER: { struct v4l2_dbg_register *p = arg; - if (!capable(CAP_SYS_ADMIN)) - ret = -EPERM; - else if (ops->vidioc_s_register) - ret = ops->vidioc_s_register(file, fh, p); + if (ops->vidioc_s_register) { + if (!capable(CAP_SYS_ADMIN)) + ret = -EPERM; + else + ret = ops->vidioc_s_register(file, fh, p); + } break; } #endif -- cgit v1.2.3-70-g09d2 From 131ddd1a3072aebca666767151acaa7574beb583 Mon Sep 17 00:00:00 2001 From: Tobias Lorenz Date: Sat, 8 Jan 2011 14:12:30 -0300 Subject: [media] radio-si470x: de-emphasis should be set if requested by module parameter instead of always setting de-emphasis. Reported-by: Tobias Lorenz Signed-off-by: Joonyoung Shim Acked-by: Tobias Lorenz Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/si470x/radio-si470x-common.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/radio/si470x/radio-si470x-common.c b/drivers/media/radio/si470x/radio-si470x-common.c index ac76dfe5b3f..35488baf29b 100644 --- a/drivers/media/radio/si470x/radio-si470x-common.c +++ b/drivers/media/radio/si470x/radio-si470x-common.c @@ -357,7 +357,8 @@ int si470x_start(struct si470x_device *radio) goto done; /* sysconfig 1 */ - radio->registers[SYSCONFIG1] = SYSCONFIG1_DE; + radio->registers[SYSCONFIG1] = + (de << 11) & SYSCONFIG1_DE; /* DE*/ retval = si470x_set_register(radio, SYSCONFIG1); if (retval < 0) goto done; -- cgit v1.2.3-70-g09d2 From 186a21cb77ffe23397aaea302ab32b510b3e2df4 Mon Sep 17 00:00:00 2001 From: Tobias Lorenz Date: Sat, 8 Jan 2011 16:13:04 -0300 Subject: [media] radio-si470x: Always report support for RDS The si470x i2c and usb driver support the RDS, so this ifdef statement doesn't need more. [mchehab@redhat.com: Fix a conflict on it] Signed-off-by: Joonyoung Shim Acked-by: Tobias Lorenz Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/si470x/radio-si470x-common.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/media/radio/si470x/radio-si470x-common.c b/drivers/media/radio/si470x/radio-si470x-common.c index 35488baf29b..60c176fe328 100644 --- a/drivers/media/radio/si470x/radio-si470x-common.c +++ b/drivers/media/radio/si470x/radio-si470x-common.c @@ -688,12 +688,8 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv, /* driver constants */ strcpy(tuner->name, "FM"); tuner->type = V4L2_TUNER_RADIO; -#if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE) tuner->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO; -#else - tuner->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; -#endif /* range limits */ switch ((radio->registers[SYSCONFIG2] & SYSCONFIG2_BAND) >> 6) { @@ -719,12 +715,10 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv, tuner->rxsubchans = V4L2_TUNER_SUB_MONO; else tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; -#if defined(CONFIG_USB_SI470X) || defined(CONFIG_USB_SI470X_MODULE) /* If there is a reliable method of detecting an RDS channel, then this code should check for that before setting this RDS subchannel. */ tuner->rxsubchans |= V4L2_TUNER_SUB_RDS; -#endif /* mono/stereo selector */ if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 0) -- cgit v1.2.3-70-g09d2 From 312d63e4b0ca8456c82d01a6446795f7d029ecde Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 12 Jan 2011 12:16:34 -0300 Subject: [media] rc-dib0700-nec: Fix keytable for Pixelview SBTVD dib0700 now outputs NEC extended keycodes. Fix the keytable to reflect that. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/keymaps/rc-dib0700-nec.c | 52 +++++++++++++++---------------- 1 file changed, 26 insertions(+), 26 deletions(-) diff --git a/drivers/media/rc/keymaps/rc-dib0700-nec.c b/drivers/media/rc/keymaps/rc-dib0700-nec.c index c59851b203d..7a5f5300caf 100644 --- a/drivers/media/rc/keymaps/rc-dib0700-nec.c +++ b/drivers/media/rc/keymaps/rc-dib0700-nec.c @@ -19,35 +19,35 @@ static struct rc_map_table dib0700_nec_table[] = { /* Key codes for the Pixelview SBTVD remote */ - { 0x8613, KEY_MUTE }, - { 0x8612, KEY_POWER }, - { 0x8601, KEY_1 }, - { 0x8602, KEY_2 }, - { 0x8603, KEY_3 }, - { 0x8604, KEY_4 }, - { 0x8605, KEY_5 }, - { 0x8606, KEY_6 }, - { 0x8607, KEY_7 }, - { 0x8608, KEY_8 }, - { 0x8609, KEY_9 }, - { 0x8600, KEY_0 }, - { 0x860d, KEY_CHANNELUP }, - { 0x8619, KEY_CHANNELDOWN }, - { 0x8610, KEY_VOLUMEUP }, - { 0x860c, KEY_VOLUMEDOWN }, + { 0x866b13, KEY_MUTE }, + { 0x866b12, KEY_POWER }, + { 0x866b01, KEY_1 }, + { 0x866b02, KEY_2 }, + { 0x866b03, KEY_3 }, + { 0x866b04, KEY_4 }, + { 0x866b05, KEY_5 }, + { 0x866b06, KEY_6 }, + { 0x866b07, KEY_7 }, + { 0x866b08, KEY_8 }, + { 0x866b09, KEY_9 }, + { 0x866b00, KEY_0 }, + { 0x866b0d, KEY_CHANNELUP }, + { 0x866b19, KEY_CHANNELDOWN }, + { 0x866b10, KEY_VOLUMEUP }, + { 0x866b0c, KEY_VOLUMEDOWN }, - { 0x860a, KEY_CAMERA }, - { 0x860b, KEY_ZOOM }, - { 0x861b, KEY_BACKSPACE }, - { 0x8615, KEY_ENTER }, + { 0x866b0a, KEY_CAMERA }, + { 0x866b0b, KEY_ZOOM }, + { 0x866b1b, KEY_BACKSPACE }, + { 0x866b15, KEY_ENTER }, - { 0x861d, KEY_UP }, - { 0x861e, KEY_DOWN }, - { 0x860e, KEY_LEFT }, - { 0x860f, KEY_RIGHT }, + { 0x866b1d, KEY_UP }, + { 0x866b1e, KEY_DOWN }, + { 0x866b0e, KEY_LEFT }, + { 0x866b0f, KEY_RIGHT }, - { 0x8618, KEY_RECORD }, - { 0x861a, KEY_STOP }, + { 0x866b18, KEY_RECORD }, + { 0x866b1a, KEY_STOP }, /* Key codes for the EvolutePC TVWay+ remote */ { 0x7a00, KEY_MENU }, -- cgit v1.2.3-70-g09d2 From 59aa346009c06c6697e9db008e67e4ff8c205091 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 12 Jan 2011 12:17:52 -0300 Subject: [media] dib0700: Fix IR keycode handling Fixes Fedora 14 bug: https://bugzilla.redhat.com/show_bug.cgi?id=667157 There are a few bugs at the code that generates the scancode at dib0700: - RC keycode is wrong (it outputs a 24 bits keycode); - NEC extended outputs a keycode that have endiannes issues; - keycode tables for NEC extended remotes need to be updated. The last issue need to be done as we get reports, as we don't have the complete NEC-extended keycodes at the dibcom table. This patch fixes the first two issues. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index 8ca48f76dfa..98ffb40728e 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -514,8 +514,8 @@ struct dib0700_rc_response { union { u16 system16; struct { - u8 system; u8 not_system; + u8 system; }; }; u8 data; @@ -575,7 +575,7 @@ static void dib0700_rc_urb_completion(struct urb *purb) if ((poll_reply->system ^ poll_reply->not_system) != 0xff) { deb_data("NEC extended protocol\n"); /* NEC extended code - 24 bits */ - keycode = poll_reply->system16 << 8 | poll_reply->data; + keycode = be16_to_cpu(poll_reply->system16) << 8 | poll_reply->data; } else { deb_data("NEC normal protocol\n"); /* normal NEC code - 16 bits */ @@ -587,7 +587,7 @@ static void dib0700_rc_urb_completion(struct urb *purb) deb_data("RC5 protocol\n"); /* RC5 Protocol */ toggle = poll_reply->report_id; - keycode = poll_reply->system16 << 8 | poll_reply->data; + keycode = poll_reply->system << 8 | poll_reply->data; break; } -- cgit v1.2.3-70-g09d2 From e6bcb2f324cf28469d2713e86beace07f25596cf Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 12 Jan 2011 13:50:01 -0300 Subject: [media] ir-kbd-i2c: Make IR debug messages more useful Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ir-kbd-i2c.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index c87b6bc4555..b173e409cd2 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -244,15 +244,17 @@ static void ir_key_poll(struct IR_i2c *ir) static u32 ir_key, ir_raw; int rc; - dprintk(2,"ir_poll_key\n"); + dprintk(3, "%s\n", __func__); rc = ir->get_key(ir, &ir_key, &ir_raw); if (rc < 0) { dprintk(2,"error\n"); return; } - if (rc) + if (rc) { + dprintk(1, "%s: keycode = 0x%04x\n", __func__, ir_key); rc_keydown(ir->rc, ir_key, 0); + } } static void ir_work(struct work_struct *work) -- cgit v1.2.3-70-g09d2 From 5a85025f7dabc5b039335a7d1fb5f9002efa9488 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 12 Jan 2011 14:22:42 -0300 Subject: [media] em28xx: Fix IR support for WinTV USB2 Due to a lack of a break inside the switch, it were getting the wrong keytable and get_key function. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 099d5df8c57..ba03a448b41 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -2437,6 +2437,7 @@ void em28xx_register_i2c_ir(struct em28xx *dev) dev->init_data.ir_codes = RC_MAP_RC5_HAUPPAUGE_NEW; dev->init_data.get_key = em28xx_get_key_em_haup; dev->init_data.name = "i2c IR (EM2840 Hauppauge)"; + break; case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE: dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE; dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe; -- cgit v1.2.3-70-g09d2 From 567aba0b7997dad5fe3fb4aeb174ee9018df8c5b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Jan 2011 11:58:36 -0300 Subject: [media] tda8290: Make all read operations atomic Read operations should be preceeded by a write operation. However, nothing prevents that an I2C operation could happen between the two transactions. To avoid that problem, use an unique I2C transfer for both parts of the I2C transaction. Cc: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda8290.c | 119 +++++++++++++++++++--------------- 1 file changed, 66 insertions(+), 53 deletions(-) diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c index c9062ceddc7..5f889c1b91d 100644 --- a/drivers/media/common/tuners/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -95,8 +95,7 @@ static int tda8295_i2c_bridge(struct dvb_frontend *fe, int close) msleep(20); } else { msg = disable; - tuner_i2c_xfer_send(&priv->i2c_props, msg, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &msg[1], 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, msg, 1, &msg[1], 1); buf[2] = msg[1]; buf[2] &= ~0x04; @@ -239,13 +238,15 @@ static void tda8290_set_params(struct dvb_frontend *fe, fe->ops.tuner_ops.set_analog_params(fe, params); for (i = 0; i < 3; i++) { - tuner_i2c_xfer_send(&priv->i2c_props, &addr_pll_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &pll_stat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_pll_stat, 1, &pll_stat, 1); if (pll_stat & 0x80) { - tuner_i2c_xfer_send(&priv->i2c_props, &addr_adc_sat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &adc_sat, 1); - tuner_i2c_xfer_send(&priv->i2c_props, &addr_agc_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &agc_stat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_adc_sat, 1, + &adc_sat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_agc_stat, 1, + &agc_stat, 1); tuner_dbg("tda8290 is locked, AGC: %d\n", agc_stat); break; } else { @@ -259,20 +260,22 @@ static void tda8290_set_params(struct dvb_frontend *fe, agc_stat, adc_sat, pll_stat & 0x80); tuner_i2c_xfer_send(&priv->i2c_props, gainset_2, 2); msleep(100); - tuner_i2c_xfer_send(&priv->i2c_props, &addr_agc_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &agc_stat, 1); - tuner_i2c_xfer_send(&priv->i2c_props, &addr_pll_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &pll_stat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_agc_stat, 1, &agc_stat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_pll_stat, 1, &pll_stat, 1); if ((agc_stat > 115) || !(pll_stat & 0x80)) { tuner_dbg("adjust gain, step 2. Agc: %d, lock: %d\n", agc_stat, pll_stat & 0x80); if (priv->cfg.agcf) priv->cfg.agcf(fe); msleep(100); - tuner_i2c_xfer_send(&priv->i2c_props, &addr_agc_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &agc_stat, 1); - tuner_i2c_xfer_send(&priv->i2c_props, &addr_pll_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &pll_stat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_agc_stat, 1, + &agc_stat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_pll_stat, 1, + &pll_stat, 1); if((agc_stat > 115) || !(pll_stat & 0x80)) { tuner_dbg("adjust gain, step 3. Agc: %d\n", agc_stat); tuner_i2c_xfer_send(&priv->i2c_props, adc_head_12, 2); @@ -284,10 +287,12 @@ static void tda8290_set_params(struct dvb_frontend *fe, /* l/ l' deadlock? */ if(priv->tda8290_easy_mode & 0x60) { - tuner_i2c_xfer_send(&priv->i2c_props, &addr_adc_sat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &adc_sat, 1); - tuner_i2c_xfer_send(&priv->i2c_props, &addr_pll_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &pll_stat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_adc_sat, 1, + &adc_sat, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &addr_pll_stat, 1, + &pll_stat, 1); if ((adc_sat > 20) || !(pll_stat & 0x80)) { tuner_dbg("trying to resolve SECAM L deadlock\n"); tuner_i2c_xfer_send(&priv->i2c_props, agc_rst_on, 2); @@ -307,8 +312,7 @@ static void tda8295_power(struct dvb_frontend *fe, int enable) struct tda8290_priv *priv = fe->analog_demod_priv; unsigned char buf[] = { 0x30, 0x00 }; /* clb_stdbt */ - tuner_i2c_xfer_send(&priv->i2c_props, &buf[0], 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &buf[1], 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, &buf[0], 1, &buf[1], 1); if (enable) buf[1] = 0x01; @@ -323,8 +327,7 @@ static void tda8295_set_easy_mode(struct dvb_frontend *fe, int enable) struct tda8290_priv *priv = fe->analog_demod_priv; unsigned char buf[] = { 0x01, 0x00 }; - tuner_i2c_xfer_send(&priv->i2c_props, &buf[0], 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &buf[1], 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, &buf[0], 1, &buf[1], 1); if (enable) buf[1] = 0x01; /* rising edge sets regs 0x02 - 0x23 */ @@ -353,8 +356,7 @@ static void tda8295_agc1_out(struct dvb_frontend *fe, int enable) struct tda8290_priv *priv = fe->analog_demod_priv; unsigned char buf[] = { 0x02, 0x00 }; /* DIV_FUNC */ - tuner_i2c_xfer_send(&priv->i2c_props, &buf[0], 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &buf[1], 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, &buf[0], 1, &buf[1], 1); if (enable) buf[1] &= ~0x40; @@ -370,10 +372,10 @@ static void tda8295_agc2_out(struct dvb_frontend *fe, int enable) unsigned char set_gpio_cf[] = { 0x44, 0x00 }; unsigned char set_gpio_val[] = { 0x46, 0x00 }; - tuner_i2c_xfer_send(&priv->i2c_props, &set_gpio_cf[0], 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &set_gpio_cf[1], 1); - tuner_i2c_xfer_send(&priv->i2c_props, &set_gpio_val[0], 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &set_gpio_val[1], 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &set_gpio_cf[0], 1, &set_gpio_cf[1], 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &set_gpio_val[0], 1, &set_gpio_val[1], 1); set_gpio_cf[1] &= 0xf0; /* clear GPIO_0 bits 3-0 */ @@ -392,8 +394,7 @@ static int tda8295_has_signal(struct dvb_frontend *fe) unsigned char hvpll_stat = 0x26; unsigned char ret; - tuner_i2c_xfer_send(&priv->i2c_props, &hvpll_stat, 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &ret, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, &hvpll_stat, 1, &ret, 1); return (ret & 0x01) ? 65535 : 0; } @@ -413,8 +414,8 @@ static void tda8295_set_params(struct dvb_frontend *fe, tda8295_power(fe, 1); tda8295_agc1_out(fe, 1); - tuner_i2c_xfer_send(&priv->i2c_props, &blanking_mode[0], 1); - tuner_i2c_xfer_recv(&priv->i2c_props, &blanking_mode[1], 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + &blanking_mode[0], 1, &blanking_mode[1], 1); tda8295_set_video_std(fe); @@ -447,8 +448,8 @@ static int tda8290_has_signal(struct dvb_frontend *fe) unsigned char i2c_get_afc[1] = { 0x1B }; unsigned char afc = 0; - tuner_i2c_xfer_send(&priv->i2c_props, i2c_get_afc, ARRAY_SIZE(i2c_get_afc)); - tuner_i2c_xfer_recv(&priv->i2c_props, &afc, 1); + tuner_i2c_xfer_send_recv(&priv->i2c_props, + i2c_get_afc, ARRAY_SIZE(i2c_get_afc), &afc, 1); return (afc & 0x80)? 65535:0; } @@ -654,20 +655,26 @@ static int tda829x_find_tuner(struct dvb_frontend *fe) static int tda8290_probe(struct tuner_i2c_props *i2c_props) { #define TDA8290_ID 0x89 - unsigned char tda8290_id[] = { 0x1f, 0x00 }; + u8 reg = 0x1f, id; + struct i2c_msg msg_read[] = { + { .addr = 0x4b, .flags = 0, .len = 1, .buf = ® }, + { .addr = 0x4b, .flags = I2C_M_RD, .len = 1, .buf = &id }, + }; /* detect tda8290 */ - tuner_i2c_xfer_send(i2c_props, &tda8290_id[0], 1); - tuner_i2c_xfer_recv(i2c_props, &tda8290_id[1], 1); + if (i2c_transfer(i2c_props->adap, msg_read, 2) != 2) { + printk(KERN_WARNING "%s: tda8290 couldn't read register 0x%02x\n", + __func__, reg); + return -ENODEV; + } - if (tda8290_id[1] == TDA8290_ID) { + if (id == TDA8290_ID) { if (debug) printk(KERN_DEBUG "%s: tda8290 detected @ %d-%04x\n", __func__, i2c_adapter_id(i2c_props->adap), i2c_props->addr); return 0; } - return -ENODEV; } @@ -675,16 +682,23 @@ static int tda8295_probe(struct tuner_i2c_props *i2c_props) { #define TDA8295_ID 0x8a #define TDA8295C2_ID 0x8b - unsigned char tda8295_id[] = { 0x2f, 0x00 }; + u8 reg = 0x2f, id; + struct i2c_msg msg_read[] = { + { .addr = 0x4b, .flags = 0, .len = 1, .buf = ® }, + { .addr = 0x4b, .flags = I2C_M_RD, .len = 1, .buf = &id }, + }; - /* detect tda8295 */ - tuner_i2c_xfer_send(i2c_props, &tda8295_id[0], 1); - tuner_i2c_xfer_recv(i2c_props, &tda8295_id[1], 1); + /* detect tda8290 */ + if (i2c_transfer(i2c_props->adap, msg_read, 2) != 2) { + printk(KERN_WARNING "%s: tda8290 couldn't read register 0x%02x\n", + __func__, reg); + return -ENODEV; + } - if ((tda8295_id[1] & 0xfe) == TDA8295_ID) { + if ((id & 0xfe) == TDA8295_ID) { if (debug) printk(KERN_DEBUG "%s: %s detected @ %d-%04x\n", - __func__, (tda8295_id[1] == TDA8295_ID) ? + __func__, (id == TDA8295_ID) ? "tda8295c1" : "tda8295c2", i2c_adapter_id(i2c_props->adap), i2c_props->addr); @@ -809,8 +823,8 @@ int tda829x_probe(struct i2c_adapter *i2c_adap, u8 i2c_addr) int i; /* rule out tda9887, which would return the same byte repeatedly */ - tuner_i2c_xfer_send(&i2c_props, soft_reset, 1); - tuner_i2c_xfer_recv(&i2c_props, buf, PROBE_BUFFER_SIZE); + tuner_i2c_xfer_send_recv(&i2c_props, + soft_reset, 1, buf, PROBE_BUFFER_SIZE); for (i = 1; i < PROBE_BUFFER_SIZE; i++) { if (buf[i] != buf[0]) break; @@ -827,13 +841,12 @@ int tda829x_probe(struct i2c_adapter *i2c_adap, u8 i2c_addr) /* fall back to old probing method */ tuner_i2c_xfer_send(&i2c_props, easy_mode_b, 2); tuner_i2c_xfer_send(&i2c_props, soft_reset, 2); - tuner_i2c_xfer_send(&i2c_props, &addr_dto_lsb, 1); - tuner_i2c_xfer_recv(&i2c_props, &data, 1); + tuner_i2c_xfer_send_recv(&i2c_props, &addr_dto_lsb, 1, &data, 1); if (data == 0) { tuner_i2c_xfer_send(&i2c_props, easy_mode_g, 2); tuner_i2c_xfer_send(&i2c_props, soft_reset, 2); - tuner_i2c_xfer_send(&i2c_props, &addr_dto_lsb, 1); - tuner_i2c_xfer_recv(&i2c_props, &data, 1); + tuner_i2c_xfer_send_recv(&i2c_props, + &addr_dto_lsb, 1, &data, 1); if (data == 0x7b) { return 0; } -- cgit v1.2.3-70-g09d2 From 47ab285a960ac456506297c93322ab13c3522f5a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Jan 2011 12:02:00 -0300 Subject: [media] tda8290: Fix a bug if no tuner is detected If tda8290 is detected, but no tuner is found, the driver will do bad things: tuner 2-0060: chip found @ 0xc0 (saa7133[0]) tda829x 2-0060: could not clearly identify tuner address, defaulting to 60 tda829x 2-0060: tuner access failed! BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [] set_audio+0x47/0x170 [tda8290] PGD 1187b0067 PUD 11771e067 PMD 0 Oops: 0002 [#1] SMP last sysfs file: /sys/module/i2c_core/initstate CPU 0 Modules linked in: tda8290(U) tea5767(U) tuner(U) ir_lirc_codec(U) lirc_dev(U) ir_sony_decoder(U) ir_jvc_decoder(U) ir_rc6_decoder(U) ir_rc5_decoder(U) saa7134(+)(U) v4l2_common(U) ir_nec_decoder(U) videodev(U) v4l2_compat_ioctl32(U) rc_core(U) videobuf_dma_sg(U) videobuf_core(U) tveeprom(U) ebtable_nat ebtables xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table xt_physdev iptable_filter ip_tables ip6t_REJECT ip6table_filter ip6_tables ipv6 dm_mirror dm_region_hash dm_log parport kvm_intel kvm uinput floppy tpm_infineon wmi sg serio_raw iTCO_wdt iTCO_vendor_support tg3 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc i7core_edac edac_core nouveau Modules linked in: tda8290(U) tea5767(U) tuner(U) ir_lirc_codec(U) lirc_dev(U) ir_sony_decoder(U) ir_jvc_decoder(U) ir_rc6_decoder(U) ir_rc5_decoder(U) saa7134(+)(U) v4l2_common(U) ir_nec_decoder(U) videodev(U) v4l2_compat_ioctl32(U) rc_core(U) videobuf_dma_sg(U) videobuf_core(U) tveeprom(U) ebtable_nat ebtables xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table xt_physdev iptable_filter ip_tables ip6t_REJECT ip6table_filter ip6_tables ipv6 dm_mirror dm_region_hash dm_log parport kvm_intel kvm uinput floppy tpm_infineon wmi sg serio_raw iTCO_wdt iTCO_vendor_support tg3 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc i7core_edac edac_core nouveau ttm drm_kms_helper drm i2c_algo_bit video output i2c_core ext3 jbd mbcache firewire_ohci firewire_core crc_itu_t sr_mod cdrom sd_mod crc_t10dif ahci dm_mod [last unloaded: microcode] Pid: 9497, comm: modprobe Not tainted 2.6.32-72.el6.x86_64 #1 HP Z400 Workstation RIP: 0010:[] [] set_audio+0x47/0x170 [tda8290] RSP: 0018:ffff88010ba01b28 EFLAGS: 00010206 RAX: 00000000000000ff RBX: ffff880119522800 RCX: 0000000000000002 RDX: 0000000000003be0 RSI: ffff88010ba01bb8 RDI: 0000000000000000 RBP: ffff88010ba01b28 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88010ba01bb8 R14: 0000000000001900 R15: 0000000000001900 FS: 00007f4b96b3d700(0000) GS:ffff880028200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 000000011866c000 CR4: 00000000000026f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 9497, threadinfo ffff88010ba00000, task ffff880100708a70) Stack: ffff88010ba01b98 ffffffffa048c95b ffff88010ba01b78 0000000000000060 <0> 0000000000000000 0000000e00000000 000000000000001d ffffffffa03ec838 <0> ffff88010abac240 ffff880119522800 ffff880119522800 ffff880119522bc0 Call Trace: [] tda8295_set_params+0x3b/0x210 [tda8290] [] ? v4l2_i2c_new_subdev_cfg+0x88/0xc0 [v4l2_common] [] set_freq+0x128/0x2f0 [tuner] [] tuner_s_std+0xc4/0x740 [tuner] [] saa7134_set_tvnorm_hw+0x2d6/0x3d0 [saa7134] [] set_tvnorm+0xd5/0x100 [saa7134] [] saa7134_video_init2+0x1d/0x50 [saa7134] [] saa7134_initdev+0x6e1/0xb1d [saa7134] [] ? kobject_get+0x1a/0x30 [] local_pci_probe+0x17/0x20 [] pci_device_probe+0x101/0x120 [] ? driver_sysfs_add+0x62/0x90 [] driver_probe_device+0xa0/0x2a0 [] __driver_attach+0xab/0xb0 [] ? __driver_attach+0x0/0xb0 [] bus_for_each_dev+0x64/0x90 [] driver_attach+0x1e/0x20 [] bus_add_driver+0x200/0x300 [] driver_register+0x76/0x140 [] ? printk+0x41/0x46 [] __pci_register_driver+0x56/0xd0 [] ? saa7134_init+0x0/0x4f [saa7134] [] saa7134_init+0x4d/0x4f [saa7134] [] do_one_initcall+0x3c/0x1d0 [] sys_init_module+0xdf/0x250 [] system_call_fastpath+0x16/0x1b Code: 20 01 49 c7 c0 c9 ec 48 a0 83 7e 04 01 74 2d 8b 0d 3f 2f 00 00 85 c9 0f 85 d7 00 00 00 c9 c3 0f 1f 44 00 00 a9 03 00 01 00 74 61 47 20 02 83 7e 04 01 49 c7 c0 cc ec 48 a0 75 d3 0f b6 47 22 RIP [] set_audio+0x47/0x170 [tda8290] RSP CR2: 0000000000000020 This happens because some I2C callbacks actually depend on having the driver entirely initialized. To avoid this OOPS, just clean the I2C callbacks, as if no device were detected. Cc: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda8290.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c index 5f889c1b91d..11ea4e0f9c0 100644 --- a/drivers/media/common/tuners/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -755,8 +755,11 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, } if ((!(cfg) || (TDA829X_PROBE_TUNER == cfg->probe_tuner)) && - (tda829x_find_tuner(fe) < 0)) + (tda829x_find_tuner(fe) < 0)) { + memset(&fe->ops.analog_ops, 0, sizeof(struct analog_demod_ops)); + goto fail; + } switch (priv->ver) { case TDA8290: -- cgit v1.2.3-70-g09d2 From 9d700a0696ae241380e8ca833bb5a358620d33f6 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Jan 2011 14:01:39 -0300 Subject: [media] tda8290: Turn tda829x on before touching at the I2C gate On Kworld SBTVD, tda8295-c1 starts in power off mode. It needs to be powered, otherwise, the I2C gate control command won't work. Cc: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda8290.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c index 11ea4e0f9c0..419d064a018 100644 --- a/drivers/media/common/tuners/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -754,11 +754,10 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, sizeof(struct analog_demod_ops)); } - if ((!(cfg) || (TDA829X_PROBE_TUNER == cfg->probe_tuner)) && - (tda829x_find_tuner(fe) < 0)) { - memset(&fe->ops.analog_ops, 0, sizeof(struct analog_demod_ops)); - - goto fail; + if (!(cfg) || (TDA829X_PROBE_TUNER == cfg->probe_tuner)) { + tda8295_power(fe, 1); + if (tda829x_find_tuner(fe) < 0) + goto fail; } switch (priv->ver) { @@ -803,6 +802,8 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe, return fe; fail: + memset(&fe->ops.analog_ops, 0, sizeof(struct analog_demod_ops)); + tda829x_release(fe); return NULL; } -- cgit v1.2.3-70-g09d2 From 7570800c9de39c718f84ec4ea820a788556cde4b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 14 Jan 2011 08:50:00 -0300 Subject: [media] mb86a20s: Fix i2c read/write error messages A script replaced err var to rc. Howerver, this script gambled "error" string, changing it to "rcor". Revert that bad change. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a20s.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/frontends/mb86a20s.c b/drivers/media/dvb/frontends/mb86a20s.c index d3ad3e75a35..e06507d2c3b 100644 --- a/drivers/media/dvb/frontends/mb86a20s.c +++ b/drivers/media/dvb/frontends/mb86a20s.c @@ -318,7 +318,7 @@ static int mb86a20s_i2c_writereg(struct mb86a20s_state *state, rc = i2c_transfer(state->i2c, &msg, 1); if (rc != 1) { - printk("%s: writereg rcor(rc == %i, reg == 0x%02x," + printk("%s: writereg error (rc == %i, reg == 0x%02x," " data == 0x%02x)\n", __func__, rc, reg, data); return rc; } @@ -353,7 +353,7 @@ static int mb86a20s_i2c_readreg(struct mb86a20s_state *state, rc = i2c_transfer(state->i2c, msg, 2); if (rc != 2) { - rc("%s: reg=0x%x (rcor=%d)\n", __func__, reg, rc); + rc("%s: reg=0x%x (error=%d)\n", __func__, reg, rc); return rc; } -- cgit v1.2.3-70-g09d2 From c736a5f28e81299b05ad14e892bdfb414daa9f5f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 14 Jan 2011 11:10:05 -0300 Subject: [media] mb86a20s: Be sure that device is initialized before starting DVB Due to a hard to track bug between tda829x/tda18271/saa7134, tda829x wants to go to analog mode during DVB initialization, causing some I2C errors. The analog failure doesn't cause any harm, as the device were already properly initialized in analog mode. However, the failure at the digital mode causes the frontend mb86a20s to not initialize. Fortunately, at least on my tests, it was possible to detect that the device is a mb86a20s before the failure. What happens is that tda8290 is a very bad boy: during DVB setup, it keeps insisting to call tda18271 analog_set_params, that calls tune_agc code. The tune_agc code calls saa7134 driver, changing the value of GPIO 27, switching from digital to analog mode and disabling the access to mb86a20s, as, on Kworld SBTVD, the same GPIO used to switch the hardware AGC mode seems to be used to enable the I2C switch that allows access to the frontend (mb86a20s). So, a call to analog_set_params ultimately disables the access to the frontend, and causes a failure at the init frontend logic. This patch is a workaround for this issue: it simply checks if the frontend init had any failure. If so, it will init the frontend when some DTV application will try to set DVB mode. Even being a hack for Kworld SBTVD to work, and assumning that we could teach tda8290 to be a good boy, this is actually an improvement at the frontend driver, as it will be more reliable to initialization failures. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/mb86a20s.c | 32 ++++++++++++++++++++++++++++---- 1 file changed, 28 insertions(+), 4 deletions(-) diff --git a/drivers/media/dvb/frontends/mb86a20s.c b/drivers/media/dvb/frontends/mb86a20s.c index e06507d2c3b..cc4acd2f920 100644 --- a/drivers/media/dvb/frontends/mb86a20s.c +++ b/drivers/media/dvb/frontends/mb86a20s.c @@ -43,6 +43,8 @@ struct mb86a20s_state { const struct mb86a20s_config *config; struct dvb_frontend frontend; + + bool need_init; }; struct regdata { @@ -382,23 +384,31 @@ static int mb86a20s_initfe(struct dvb_frontend *fe) /* Initialize the frontend */ rc = mb86a20s_writeregdata(state, mb86a20s_init); if (rc < 0) - return rc; + goto err; if (!state->config->is_serial) { regD5 &= ~1; rc = mb86a20s_writereg(state, 0x50, 0xd5); if (rc < 0) - return rc; + goto err; rc = mb86a20s_writereg(state, 0x51, regD5); if (rc < 0) - return rc; + goto err; } if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); - return 0; +err: + if (rc < 0) { + state->need_init = true; + printk(KERN_INFO "mb86a20s: Init failed. Will try again later\n"); + } else { + state->need_init = false; + dprintk("Initialization succeded.\n"); + } + return rc; } static int mb86a20s_read_signal_strength(struct dvb_frontend *fe, u16 *strength) @@ -485,8 +495,22 @@ static int mb86a20s_set_frontend(struct dvb_frontend *fe, if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); + dprintk("Calling tuner set parameters\n"); fe->ops.tuner_ops.set_params(fe, p); + /* + * Make it more reliable: if, for some reason, the initial + * device initialization doesn't happen, initialize it when + * a SBTVD parameters are adjusted. + * + * Unfortunately, due to a hard to track bug at tda829x/tda18271, + * the agc callback logic is not called during DVB attach time, + * causing mb86a20s to not be initialized with Kworld SBTVD. + * So, this hack is needed, in order to make Kworld SBTVD to work. + */ + if (state->need_init) + mb86a20s_initfe(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception); -- cgit v1.2.3-70-g09d2 From 6183040680c56ec4bd3d7c9398cbc05e84d60c1f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Jan 2011 14:24:44 -0300 Subject: [media] saa7134: Fix analog mode for Kworld SBTVD There were some issues at tda8290 that were preventing this device to work. Now that those fixes were fixed, we can enable analog mode. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-cards.c | 40 +++-------------------------- drivers/media/video/saa7134/saa7134-dvb.c | 40 +---------------------------- 2 files changed, 4 insertions(+), 76 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index e7aa588c6c5..b2426000e1d 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5179,18 +5179,8 @@ struct saa7134_board saa7134_boards[] = { [SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG] = { .name = "Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid", .audio_clock = 0x00187de7, -#if 0 - /* - * FIXME: Analog mode doesn't work, if digital is enabled. The proper - * fix is to use tda8290 driver, but Kworld seems to use an - * unsupported version of tda8295. - */ - .tuner_type = TUNER_NXP_TDA18271, /* TUNER_PHILIPS_TDA8290 */ - .tuner_addr = 0x60, -#else - .tuner_type = UNSET, + .tuner_type = TUNER_PHILIPS_TDA8290, .tuner_addr = ADDR_UNSET, -#endif .radio_type = UNSET, .radio_addr = ADDR_UNSET, .gpiomask = 0x8e054000, @@ -5201,6 +5191,7 @@ struct saa7134_board saa7134_boards[] = { .vmux = 1, .amux = TV, .tv = 1, + .gpio = 0x4000, #if 0 /* FIXME */ }, { .name = name_comp1, @@ -7659,36 +7650,11 @@ int saa7134_board_init2(struct saa7134_dev *dev) break; } case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: - { - struct i2c_msg msg = { .addr = 0x4b, .flags = 0 }; - int i; - static u8 buffer[][2] = { - {0x30, 0x31}, - {0xff, 0x00}, - {0x41, 0x03}, - {0x41, 0x1a}, - {0xff, 0x02}, - {0x34, 0x00}, - {0x45, 0x97}, - {0x45, 0xc1}, - }; saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000); saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x4000); - /* - * FIXME: identify what device is at addr 0x4b and what means - * this initialization - */ - for (i = 0; i < ARRAY_SIZE(buffer); i++) { - msg.buf = &buffer[i][0]; - msg.len = ARRAY_SIZE(buffer[0]); - if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) - printk(KERN_WARNING - "%s: Unable to enable tuner(%i).\n", - dev->name, i); - } + saa7134_set_gpio(dev, 27, 0); break; - } } /* switch() */ /* initialize tuner */ diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 3315a48a848..064bf2cd5f2 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -236,7 +236,7 @@ static struct tda18271_std_map mb86a20s_tda18271_std_map = { static struct tda18271_config kworld_tda18271_config = { .std_map = &mb86a20s_tda18271_std_map, - .gate = TDA18271_GATE_DIGITAL, + .gate = TDA18271_GATE_ANALOG, }; static const struct mb86a20s_config kworld_mb86a20s_config = { @@ -623,37 +623,6 @@ static struct tda827x_config tda827x_cfg_2_sw42 = { /* ------------------------------------------------------------------ */ -static int __kworld_sbtvd_i2c_gate_ctrl(struct saa7134_dev *dev, int enable) -{ - unsigned char initmsg[] = {0x45, 0x97}; - unsigned char msg_enable[] = {0x45, 0xc1}; - unsigned char msg_disable[] = {0x45, 0x81}; - struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2}; - - if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { - wprintk("could not access the I2C gate\n"); - return -EIO; - } - if (enable) - msg.buf = msg_enable; - else - msg.buf = msg_disable; - if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { - wprintk("could not access the I2C gate\n"); - return -EIO; - } - msleep(20); - return 0; -} -static int kworld_sbtvd_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) -{ - struct saa7134_dev *dev = fe->dvb->priv; - - return __kworld_sbtvd_i2c_gate_ctrl(dev, enable); -} - -/* ------------------------------------------------------------------ */ - static struct tda1004x_config tda827x_lifeview_config = { .demod_address = 0x08, .invert = 1, @@ -1660,7 +1629,6 @@ static int dvb_init(struct saa7134_dev *dev) } break; case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: - __kworld_sbtvd_i2c_gate_ctrl(dev, 0); saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x14000); saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x14000); msleep(20); @@ -1670,16 +1638,10 @@ static int dvb_init(struct saa7134_dev *dev) fe0->dvb.frontend = dvb_attach(mb86a20s_attach, &kworld_mb86a20s_config, &dev->i2c_adap); - __kworld_sbtvd_i2c_gate_ctrl(dev, 1); if (fe0->dvb.frontend != NULL) { dvb_attach(tda18271_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, &kworld_tda18271_config); - /* - * Only after success, it can initialize the gate, otherwise - * an OOPS will hit, due to kfree(fe0->dvb.frontend) - */ - fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_i2c_gate_ctrl; } break; default: -- cgit v1.2.3-70-g09d2 From 6a58bc0f506c1825cb8f8b81a5123e26bf70902c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 14 Jan 2011 09:11:21 -0300 Subject: [media] saa7134: Fix digital mode on Kworld SBTVD This patch fixes digital mode on Kworld SBTVD. Unfortunately, it disables analog mode. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-cards.c | 5 +++- drivers/media/video/saa7134/saa7134-dvb.c | 38 ++++++++++++++++++++++++++++- 2 files changed, 41 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index b2426000e1d..dea90a19043 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5179,7 +5179,11 @@ struct saa7134_board saa7134_boards[] = { [SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG] = { .name = "Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid", .audio_clock = 0x00187de7, +#if 0 .tuner_type = TUNER_PHILIPS_TDA8290, +#else + .tuner_type = UNSET, +#endif .tuner_addr = ADDR_UNSET, .radio_type = UNSET, .radio_addr = ADDR_UNSET, @@ -5191,7 +5195,6 @@ struct saa7134_board saa7134_boards[] = { .vmux = 1, .amux = TV, .tv = 1, - .gpio = 0x4000, #if 0 /* FIXME */ }, { .name = name_comp1, diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 064bf2cd5f2..d2a12df28af 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -236,13 +236,38 @@ static struct tda18271_std_map mb86a20s_tda18271_std_map = { static struct tda18271_config kworld_tda18271_config = { .std_map = &mb86a20s_tda18271_std_map, - .gate = TDA18271_GATE_ANALOG, + .gate = TDA18271_GATE_DIGITAL, }; static const struct mb86a20s_config kworld_mb86a20s_config = { .demod_address = 0x10, }; +static int kworld_sbtvd_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct saa7134_dev *dev = fe->dvb->priv; + + unsigned char initmsg[] = {0x45, 0x97}; + unsigned char msg_enable[] = {0x45, 0xc1}; + unsigned char msg_disable[] = {0x45, 0x81}; + struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2}; + + if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { + wprintk("could not access the I2C gate\n"); + return -EIO; + } + if (enable) + msg.buf = msg_enable; + else + msg.buf = msg_disable; + if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { + wprintk("could not access the I2C gate\n"); + return -EIO; + } + msleep(20); + return 0; +} + /* ================================================================== * tda1004x based DVB-T cards, helper functions */ @@ -1639,10 +1664,21 @@ static int dvb_init(struct saa7134_dev *dev) &kworld_mb86a20s_config, &dev->i2c_adap); if (fe0->dvb.frontend != NULL) { +#if 0 + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, + &tda829x_no_probe); +#else + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_adap, 0x4b, NULL); +#endif dvb_attach(tda18271_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, &kworld_tda18271_config); + fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_gate_ctrl; } + + /* mb86a20s need to use the I2C gateway */ break; default: wprintk("Huh? unknown DVB card?\n"); -- cgit v1.2.3-70-g09d2 From ecb71d262b0323981e07ce415da9b7adc917990a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 14 Jan 2011 12:03:03 -0300 Subject: [media] saa7134: Kworld SBTVD: make both analog and digital to work There are some weird bugs at tda8290/tda18271 initialization, as it insits do do analog initialization during DVB frontend attach: DVB: registering new adapter (saa7133[0]) DVB: registering adapter 0 frontend 0 (Fujitsu mb86A20s)... mb86a20s: mb86a20s_initfe tda18271_write_regs: [2-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 tda18271_init: [2-0060|M] error -5 on line 830 tda18271_tune: [2-0060|M] error -5 on line 908 tda18271_write_regs tda18271_write_regs: [2-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 tda18271c2_rf_tracking_filters_correction: [2-0060|M] error -5 on line 265 tda18271_write_regs tda18271_write_regs: [2-0060|M] ERROR: idx = 0x25, len = 1, i2c_transfer returned: -5 tda18271_channel_configuration: [2-0060|M] error -5 on line 119 tda18271_set_analog_params: [2-0060|M] error -5 on line 1045 tda18271_set_analog_params: [2-0060|M] error -5 on line 1045 tda829x 2-004b: tda8295 not locked, no signal? tda829x 2-004b: tda8295_i2c_bridge: disable i2c gate tda829x 2-004b: tda8295 not locked, no signal? tda829x 2-004b: tda8295_i2c_bridge: disable i2c gate mb86a20s_i2c_writereg: writereg error (rc == -5, reg == 0x29, data == 0x33) mb86a20s: Init failed. Will try again later The problem is that mb86a20s is only visible if the analog part is disabled. However, due to a trick at mb86a20s, it will later initialize properly: mb86a20s: mb86a20s_initfe: Initialization succeded. This is hacky and ugly. However, I coldn't find any easy way to fix it. A proper fix would be to have a resource locking schema, used by both V4L and DVB parts that would block access to analog registers while digital registers are in use, but this will probably put tda829x into a dead lock. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda8290.c | 1 + drivers/media/video/saa7134/saa7134-cards.c | 16 ++++++++++------ drivers/media/video/saa7134/saa7134-dvb.c | 16 +++++----------- 3 files changed, 16 insertions(+), 17 deletions(-) diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c index 419d064a018..bc6a67768af 100644 --- a/drivers/media/common/tuners/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -232,6 +232,7 @@ static void tda8290_set_params(struct dvb_frontend *fe, tuner_i2c_xfer_send(&priv->i2c_props, pll_bw_nom, 2); } + tda8290_i2c_bridge(fe, 1); if (fe->ops.tuner_ops.set_analog_params) diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index dea90a19043..deb8fcf4aa4 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5179,11 +5179,7 @@ struct saa7134_board saa7134_boards[] = { [SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG] = { .name = "Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid", .audio_clock = 0x00187de7, -#if 0 .tuner_type = TUNER_PHILIPS_TDA8290, -#else - .tuner_type = UNSET, -#endif .tuner_addr = ADDR_UNSET, .radio_type = UNSET, .radio_addr = ADDR_UNSET, @@ -6926,10 +6922,17 @@ static inline int saa7134_kworld_sbtvd_toggle_agc(struct saa7134_dev *dev, /* toggle AGC switch through GPIO 27 */ switch (mode) { case TDA18271_ANALOG: - saa7134_set_gpio(dev, 27, 0); + saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000); + saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x4000); + msleep(20); break; case TDA18271_DIGITAL: - saa7134_set_gpio(dev, 27, 1); + saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x14000); + saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x14000); + msleep(20); + saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x54000); + saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x54000); + msleep(30); break; default: return -EINVAL; @@ -6987,6 +6990,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev, int saa7134_tuner_callback(void *priv, int component, int command, int arg) { struct saa7134_dev *dev = priv; + if (dev != NULL) { switch (dev->tuner_type) { case TUNER_PHILIPS_TDA8290: diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index d2a12df28af..f65cad287b8 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -237,6 +237,8 @@ static struct tda18271_std_map mb86a20s_tda18271_std_map = { static struct tda18271_config kworld_tda18271_config = { .std_map = &mb86a20s_tda18271_std_map, .gate = TDA18271_GATE_DIGITAL, + .config = 3, /* Use tuner callback for AGC */ + }; static const struct mb86a20s_config kworld_mb86a20s_config = { @@ -1654,24 +1656,16 @@ static int dvb_init(struct saa7134_dev *dev) } break; case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: - saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x14000); - saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x14000); - msleep(20); - saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x54000); - saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x54000); - msleep(20); + /* Switch to digital mode */ + saa7134_tuner_callback(dev, 0, + TDA18271_CALLBACK_CMD_AGC_ENABLE, 1); fe0->dvb.frontend = dvb_attach(mb86a20s_attach, &kworld_mb86a20s_config, &dev->i2c_adap); if (fe0->dvb.frontend != NULL) { -#if 0 dvb_attach(tda829x_attach, fe0->dvb.frontend, &dev->i2c_adap, 0x4b, &tda829x_no_probe); -#else - dvb_attach(tda829x_attach, fe0->dvb.frontend, - &dev->i2c_adap, 0x4b, NULL); -#endif dvb_attach(tda18271_attach, fe0->dvb.frontend, 0x60, &dev->i2c_adap, &kworld_tda18271_config); -- cgit v1.2.3-70-g09d2 From 3c7c9370fb645f4713e0fbbe69425d8db9b47a13 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 8 Jan 2011 07:08:02 -0300 Subject: [media] v4l2-subdev: remove core.s_config and v4l2_i2c_new_subdev_cfg() The core.s_config op was meant for legacy drivers that needed to work with old pre-2.6.26 kernels. This is no longer relevant. Unfortunately, this op was incorrectly called from several drivers. Replace those occurences with proper i2c_board_info structs and call v4l2_i2c_new_subdev_board. After these changes v4l2_i2c_new_subdev_cfg() was no longer used, so remove that function as well. Signed-off-by: Hans Verkuil Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cafe_ccic.c | 11 +++-- drivers/media/video/cx25840/cx25840-core.c | 22 +++------ drivers/media/video/em28xx/em28xx-cards.c | 18 ++++---- drivers/media/video/ivtv/ivtv-i2c.c | 9 +++- drivers/media/video/mt9v011.c | 54 ++++++++++++++-------- drivers/media/video/mt9v011.h | 36 --------------- drivers/media/video/ov7670.c | 74 +++++++++++++----------------- drivers/media/video/sr030pc30.c | 10 ---- drivers/media/video/v4l2-common.c | 19 +------- include/media/mt9v011.h | 17 +++++++ include/media/v4l2-common.h | 13 +----- include/media/v4l2-subdev.h | 6 +-- 12 files changed, 118 insertions(+), 171 deletions(-) delete mode 100644 drivers/media/video/mt9v011.h create mode 100644 include/media/mt9v011.h diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 49f1b8f1418..55ffd60ffa7 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -2001,6 +2001,11 @@ static int cafe_pci_probe(struct pci_dev *pdev, .min_width = 320, .min_height = 240, }; + struct i2c_board_info ov7670_info = { + .type = "ov7670", + .addr = 0x42, + .platform_data = &sensor_cfg, + }; /* * Start putting together one of our big camera structures. @@ -2062,9 +2067,9 @@ static int cafe_pci_probe(struct pci_dev *pdev, if (dmi_check_system(olpc_xo1_dmi)) sensor_cfg.clock_speed = 45; - cam->sensor_addr = 0x42; - cam->sensor = v4l2_i2c_new_subdev_cfg(&cam->v4l2_dev, &cam->i2c_adapter, - "ov7670", 0, &sensor_cfg, cam->sensor_addr, NULL); + cam->sensor_addr = ov7670_info.addr; + cam->sensor = v4l2_i2c_new_subdev_board(&cam->v4l2_dev, &cam->i2c_adapter, + &ov7670_info, NULL); if (cam->sensor == NULL) { ret = -ENODEV; goto out_smbus; diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index f16461844c5..6fc09dd41b9 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -1682,20 +1682,6 @@ static int cx25840_log_status(struct v4l2_subdev *sd) return 0; } -static int cx25840_s_config(struct v4l2_subdev *sd, int irq, void *platform_data) -{ - struct cx25840_state *state = to_state(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); - - if (platform_data) { - struct cx25840_platform_data *pdata = platform_data; - - state->pvr150_workaround = pdata->pvr150_workaround; - set_input(client, state->vid_input, state->aud_input); - } - return 0; -} - static int cx23885_irq_handler(struct v4l2_subdev *sd, u32 status, bool *handled) { @@ -1787,7 +1773,6 @@ static const struct v4l2_ctrl_ops cx25840_ctrl_ops = { static const struct v4l2_subdev_core_ops cx25840_core_ops = { .log_status = cx25840_log_status, - .s_config = cx25840_s_config, .g_chip_ident = cx25840_g_chip_ident, .g_ctrl = v4l2_subdev_g_ctrl, .s_ctrl = v4l2_subdev_s_ctrl, @@ -1974,7 +1959,6 @@ static int cx25840_probe(struct i2c_client *client, state->vid_input = CX25840_COMPOSITE7; state->aud_input = CX25840_AUDIO8; state->audclk_freq = 48000; - state->pvr150_workaround = 0; state->audmode = V4L2_TUNER_MODE_LANG1; state->vbi_line_offset = 8; state->id = id; @@ -2034,6 +2018,12 @@ static int cx25840_probe(struct i2c_client *client, v4l2_ctrl_cluster(2, &state->volume); v4l2_ctrl_handler_setup(&state->hdl); + if (client->dev.platform_data) { + struct cx25840_platform_data *pdata = client->dev.platform_data; + + state->pvr150_workaround = pdata->pvr150_workaround; + } + cx25840_ir_probe(sd); return 0; } diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index ba03a448b41..87f77a34eea 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -1917,11 +1918,6 @@ static unsigned short tvp5150_addrs[] = { I2C_CLIENT_END }; -static unsigned short mt9v011_addrs[] = { - 0xba >> 1, - I2C_CLIENT_END -}; - static unsigned short msp3400_addrs[] = { 0x80 >> 1, 0x88 >> 1, @@ -2624,11 +2620,17 @@ void em28xx_card_setup(struct em28xx *dev) "tvp5150", 0, tvp5150_addrs); if (dev->em28xx_sensor == EM28XX_MT9V011) { + struct mt9v011_platform_data pdata; + struct i2c_board_info mt9v011_info = { + .type = "mt9v011", + .addr = 0xba >> 1, + .platform_data = &pdata, + }; struct v4l2_subdev *sd; - sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, - &dev->i2c_adap, "mt9v011", 0, mt9v011_addrs); - v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal); + pdata.xtal = dev->sensor_xtal; + sd = v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap, + &mt9v011_info, NULL); } diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index e103b8fc745..9fb86a081c0 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -300,10 +300,15 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx) adap, type, 0, I2C_ADDRS(hw_addrs[idx])); } else if (hw == IVTV_HW_CX25840) { struct cx25840_platform_data pdata; + struct i2c_board_info cx25840_info = { + .type = "cx25840", + .addr = hw_addrs[idx], + .platform_data = &pdata, + }; pdata.pvr150_workaround = itv->pvr150_workaround; - sd = v4l2_i2c_new_subdev_cfg(&itv->v4l2_dev, - adap, type, 0, &pdata, hw_addrs[idx], NULL); + sd = v4l2_i2c_new_subdev_board(&itv->v4l2_dev, adap, + &cx25840_info, NULL); } else { sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, hw_addrs[idx], NULL); diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c index 209ff97261a..4904d25f689 100644 --- a/drivers/media/video/mt9v011.c +++ b/drivers/media/video/mt9v011.c @@ -12,17 +12,41 @@ #include #include #include -#include "mt9v011.h" +#include MODULE_DESCRIPTION("Micron mt9v011 sensor driver"); MODULE_AUTHOR("Mauro Carvalho Chehab "); MODULE_LICENSE("GPL"); - static int debug; module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-2)"); +#define R00_MT9V011_CHIP_VERSION 0x00 +#define R01_MT9V011_ROWSTART 0x01 +#define R02_MT9V011_COLSTART 0x02 +#define R03_MT9V011_HEIGHT 0x03 +#define R04_MT9V011_WIDTH 0x04 +#define R05_MT9V011_HBLANK 0x05 +#define R06_MT9V011_VBLANK 0x06 +#define R07_MT9V011_OUT_CTRL 0x07 +#define R09_MT9V011_SHUTTER_WIDTH 0x09 +#define R0A_MT9V011_CLK_SPEED 0x0a +#define R0B_MT9V011_RESTART 0x0b +#define R0C_MT9V011_SHUTTER_DELAY 0x0c +#define R0D_MT9V011_RESET 0x0d +#define R1E_MT9V011_DIGITAL_ZOOM 0x1e +#define R20_MT9V011_READ_MODE 0x20 +#define R2B_MT9V011_GREEN_1_GAIN 0x2b +#define R2C_MT9V011_BLUE_GAIN 0x2c +#define R2D_MT9V011_RED_GAIN 0x2d +#define R2E_MT9V011_GREEN_2_GAIN 0x2e +#define R35_MT9V011_GLOBAL_GAIN 0x35 +#define RF1_MT9V011_CHIP_ENABLE 0xf1 + +#define MT9V011_VERSION 0x8232 +#define MT9V011_REV_B_VERSION 0x8243 + /* supported controls */ static struct v4l2_queryctrl mt9v011_qctrl[] = { { @@ -469,23 +493,6 @@ static int mt9v011_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt return 0; } -static int mt9v011_s_config(struct v4l2_subdev *sd, int dumb, void *data) -{ - struct mt9v011 *core = to_mt9v011(sd); - unsigned *xtal = data; - - v4l2_dbg(1, debug, sd, "s_config called\n"); - - if (xtal) { - core->xtal = *xtal; - v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n", - *xtal / 1000000, (*xtal / 1000) % 1000); - } - - return 0; -} - - #ifdef CONFIG_VIDEO_ADV_DEBUG static int mt9v011_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) @@ -536,7 +543,6 @@ static const struct v4l2_subdev_core_ops mt9v011_core_ops = { .g_ctrl = mt9v011_g_ctrl, .s_ctrl = mt9v011_s_ctrl, .reset = mt9v011_reset, - .s_config = mt9v011_s_config, .g_chip_ident = mt9v011_g_chip_ident, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = mt9v011_g_register, @@ -596,6 +602,14 @@ static int mt9v011_probe(struct i2c_client *c, core->height = 480; core->xtal = 27000000; /* Hz */ + if (c->dev.platform_data) { + struct mt9v011_platform_data *pdata = c->dev.platform_data; + + core->xtal = pdata->xtal; + v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n", + core->xtal / 1000000, (core->xtal / 1000) % 1000); + } + v4l_info(c, "chip found @ 0x%02x (%s - chip version 0x%04x)\n", c->addr << 1, c->adapter->name, version); diff --git a/drivers/media/video/mt9v011.h b/drivers/media/video/mt9v011.h deleted file mode 100644 index 3350fd6083c..00000000000 --- a/drivers/media/video/mt9v011.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor - * - * Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com) - * This code is placed under the terms of the GNU General Public License v2 - */ - -#ifndef MT9V011_H_ -#define MT9V011_H_ - -#define R00_MT9V011_CHIP_VERSION 0x00 -#define R01_MT9V011_ROWSTART 0x01 -#define R02_MT9V011_COLSTART 0x02 -#define R03_MT9V011_HEIGHT 0x03 -#define R04_MT9V011_WIDTH 0x04 -#define R05_MT9V011_HBLANK 0x05 -#define R06_MT9V011_VBLANK 0x06 -#define R07_MT9V011_OUT_CTRL 0x07 -#define R09_MT9V011_SHUTTER_WIDTH 0x09 -#define R0A_MT9V011_CLK_SPEED 0x0a -#define R0B_MT9V011_RESTART 0x0b -#define R0C_MT9V011_SHUTTER_DELAY 0x0c -#define R0D_MT9V011_RESET 0x0d -#define R1E_MT9V011_DIGITAL_ZOOM 0x1e -#define R20_MT9V011_READ_MODE 0x20 -#define R2B_MT9V011_GREEN_1_GAIN 0x2b -#define R2C_MT9V011_BLUE_GAIN 0x2c -#define R2D_MT9V011_RED_GAIN 0x2d -#define R2E_MT9V011_GREEN_2_GAIN 0x2e -#define R35_MT9V011_GLOBAL_GAIN 0x35 -#define RF1_MT9V011_CHIP_ENABLE 0xf1 - -#define MT9V011_VERSION 0x8232 -#define MT9V011_REV_B_VERSION 0x8243 - -#endif diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c index c881a64b41f..d4e7c11553c 100644 --- a/drivers/media/video/ov7670.c +++ b/drivers/media/video/ov7670.c @@ -1449,47 +1449,6 @@ static int ov7670_g_chip_ident(struct v4l2_subdev *sd, return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_OV7670, 0); } -static int ov7670_s_config(struct v4l2_subdev *sd, int dumb, void *data) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct ov7670_config *config = data; - struct ov7670_info *info = to_state(sd); - int ret; - - info->clock_speed = 30; /* default: a guess */ - - /* - * Must apply configuration before initializing device, because it - * selects I/O method. - */ - if (config) { - info->min_width = config->min_width; - info->min_height = config->min_height; - info->use_smbus = config->use_smbus; - - if (config->clock_speed) - info->clock_speed = config->clock_speed; - } - - /* Make sure it's an ov7670 */ - ret = ov7670_detect(sd); - if (ret) { - v4l_dbg(1, debug, client, - "chip found @ 0x%x (%s) is not an ov7670 chip.\n", - client->addr << 1, client->adapter->name); - kfree(info); - return ret; - } - v4l_info(client, "chip found @ 0x%02x (%s)\n", - client->addr << 1, client->adapter->name); - - info->fmt = &ov7670_formats[0]; - info->sat = 128; /* Review this */ - info->clkrc = info->clock_speed / 30; - - return 0; -} - #ifdef CONFIG_VIDEO_ADV_DEBUG static int ov7670_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) { @@ -1528,7 +1487,6 @@ static const struct v4l2_subdev_core_ops ov7670_core_ops = { .s_ctrl = ov7670_s_ctrl, .queryctrl = ov7670_queryctrl, .reset = ov7670_reset, - .s_config = ov7670_s_config, .init = ov7670_init, #ifdef CONFIG_VIDEO_ADV_DEBUG .g_register = ov7670_g_register, @@ -1558,6 +1516,7 @@ static int ov7670_probe(struct i2c_client *client, { struct v4l2_subdev *sd; struct ov7670_info *info; + int ret; info = kzalloc(sizeof(struct ov7670_info), GFP_KERNEL); if (info == NULL) @@ -1565,6 +1524,37 @@ static int ov7670_probe(struct i2c_client *client, sd = &info->sd; v4l2_i2c_subdev_init(sd, client, &ov7670_ops); + info->clock_speed = 30; /* default: a guess */ + if (client->dev.platform_data) { + struct ov7670_config *config = client->dev.platform_data; + + /* + * Must apply configuration before initializing device, because it + * selects I/O method. + */ + info->min_width = config->min_width; + info->min_height = config->min_height; + info->use_smbus = config->use_smbus; + + if (config->clock_speed) + info->clock_speed = config->clock_speed; + } + + /* Make sure it's an ov7670 */ + ret = ov7670_detect(sd); + if (ret) { + v4l_dbg(1, debug, client, + "chip found @ 0x%x (%s) is not an ov7670 chip.\n", + client->addr << 1, client->adapter->name); + kfree(info); + return ret; + } + v4l_info(client, "chip found @ 0x%02x (%s)\n", + client->addr << 1, client->adapter->name); + + info->fmt = &ov7670_formats[0]; + info->sat = 128; /* Review this */ + info->clkrc = info->clock_speed / 30; return 0; } diff --git a/drivers/media/video/sr030pc30.c b/drivers/media/video/sr030pc30.c index 864696b7a00..c901721a1db 100644 --- a/drivers/media/video/sr030pc30.c +++ b/drivers/media/video/sr030pc30.c @@ -714,15 +714,6 @@ static int sr030pc30_base_config(struct v4l2_subdev *sd) return ret; } -static int sr030pc30_s_config(struct v4l2_subdev *sd, - int irq, void *platform_data) -{ - struct sr030pc30_info *info = to_sr030pc30(sd); - - info->pdata = platform_data; - return 0; -} - static int sr030pc30_s_stream(struct v4l2_subdev *sd, int enable) { return 0; @@ -763,7 +754,6 @@ static int sr030pc30_s_power(struct v4l2_subdev *sd, int on) } static const struct v4l2_subdev_core_ops sr030pc30_core_ops = { - .s_config = sr030pc30_s_config, .s_power = sr030pc30_s_power, .queryctrl = sr030pc30_queryctrl, .s_ctrl = sr030pc30_s_ctrl, diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c index 3f0871b550a..810eef43c21 100644 --- a/drivers/media/video/v4l2-common.c +++ b/drivers/media/video/v4l2-common.c @@ -407,18 +407,6 @@ struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, /* Decrease the module use count to match the first try_module_get. */ module_put(client->driver->driver.owner); - if (sd) { - /* We return errors from v4l2_subdev_call only if we have the - callback as the .s_config is not mandatory */ - int err = v4l2_subdev_call(sd, core, s_config, - info->irq, info->platform_data); - - if (err && err != -ENOIOCTLCMD) { - v4l2_device_unregister_subdev(sd); - sd = NULL; - } - } - error: /* If we have a client but no subdev, then something went wrong and we must unregister the client. */ @@ -428,9 +416,8 @@ error: } EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_board); -struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, +struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, struct i2c_adapter *adapter, const char *client_type, - int irq, void *platform_data, u8 addr, const unsigned short *probe_addrs) { struct i2c_board_info info; @@ -440,12 +427,10 @@ struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, memset(&info, 0, sizeof(info)); strlcpy(info.type, client_type, sizeof(info.type)); info.addr = addr; - info.irq = irq; - info.platform_data = platform_data; return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, &info, probe_addrs); } -EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg); +EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev); /* Return i2c client address of v4l2_subdev. */ unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd) diff --git a/include/media/mt9v011.h b/include/media/mt9v011.h new file mode 100644 index 00000000000..ea29fc74cd0 --- /dev/null +++ b/include/media/mt9v011.h @@ -0,0 +1,17 @@ +/* mt9v011 sensor + * + * Copyright (C) 2011 Hans Verkuil + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MT9V011_H__ +#define __MT9V011_H__ + +struct mt9v011_platform_data { + unsigned xtal; /* Hz */ +}; + +#endif diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index 2d65b35cdab..a659319e858 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -138,21 +138,10 @@ struct v4l2_subdev_ops; /* Load an i2c module and return an initialized v4l2_subdev struct. The client_type argument is the name of the chip that's on the adapter. */ -struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev, +struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, struct i2c_adapter *adapter, const char *client_type, - int irq, void *platform_data, u8 addr, const unsigned short *probe_addrs); -/* Load an i2c module and return an initialized v4l2_subdev struct. - The client_type argument is the name of the chip that's on the adapter. */ -static inline struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, - struct i2c_adapter *adapter, const char *client_type, - u8 addr, const unsigned short *probe_addrs) -{ - return v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, client_type, 0, NULL, - addr, probe_addrs); -} - struct i2c_board_info; struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index b0316a7cf08..42fbe462031 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -106,10 +106,7 @@ struct v4l2_subdev_io_pin_config { u8 strength; /* Pin drive strength */ }; -/* s_config: if set, then it is always called by the v4l2_i2c_new_subdev* - functions after the v4l2_subdev was registered. It is used to pass - platform data to the subdev which can be used during initialization. - +/* s_io_pin_config: configure one or more chip I/O pins for chips that multiplex different internal signal pads out to IO pins. This function takes a pointer to an array of 'n' pin configuration entries, one for @@ -141,7 +138,6 @@ struct v4l2_subdev_io_pin_config { struct v4l2_subdev_core_ops { int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip); int (*log_status)(struct v4l2_subdev *sd); - int (*s_config)(struct v4l2_subdev *sd, int irq, void *platform_data); int (*s_io_pin_config)(struct v4l2_subdev *sd, size_t n, struct v4l2_subdev_io_pin_config *pincfg); int (*init)(struct v4l2_subdev *sd, u32 val); -- cgit v1.2.3-70-g09d2 From 45f6f84af3ae9db19f39bc5d0976d626b0ef626e Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 8 Jan 2011 07:15:53 -0300 Subject: [media] v4l2-subdev: add (un)register internal ops Some subdevs need to call into the board code after they are registered and have a valid struct v4l2_device pointer. The s_config op was abused for this, but now that it is removed we need a cleaner way of solving this. So this patch adds a struct with internal ops that the v4l2 core can call. Currently only two ops exist: register and unregister. Subdevs can implement these to call the board code and pass it the v4l2_device pointer, which the board code can then use to get access to the struct that embeds the v4l2_device. It is expected that in the future open and close ops will also be added. Signed-off-by: Hans Verkuil Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-device.c | 14 ++++++++++++-- include/media/v4l2-subdev.h | 17 +++++++++++++++++ 2 files changed, 29 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c index 7fe6f92af48..b24f002ffa6 100644 --- a/drivers/media/video/v4l2-device.c +++ b/drivers/media/video/v4l2-device.c @@ -126,11 +126,19 @@ int v4l2_device_register_subdev(struct v4l2_device *v4l2_dev, WARN_ON(sd->v4l2_dev != NULL); if (!try_module_get(sd->owner)) return -ENODEV; + sd->v4l2_dev = v4l2_dev; + if (sd->internal_ops && sd->internal_ops->registered) { + err = sd->internal_ops->registered(sd); + if (err) + return err; + } /* This just returns 0 if either of the two args is NULL */ err = v4l2_ctrl_add_handler(v4l2_dev->ctrl_handler, sd->ctrl_handler); - if (err) + if (err) { + if (sd->internal_ops && sd->internal_ops->unregistered) + sd->internal_ops->unregistered(sd); return err; - sd->v4l2_dev = v4l2_dev; + } spin_lock(&v4l2_dev->lock); list_add_tail(&sd->list, &v4l2_dev->subdevs); spin_unlock(&v4l2_dev->lock); @@ -146,6 +154,8 @@ void v4l2_device_unregister_subdev(struct v4l2_subdev *sd) spin_lock(&sd->v4l2_dev->lock); list_del(&sd->list); spin_unlock(&sd->v4l2_dev->lock); + if (sd->internal_ops && sd->internal_ops->unregistered) + sd->internal_ops->unregistered(sd); sd->v4l2_dev = NULL; module_put(sd->owner); } diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 42fbe462031..daf1e57d9b2 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -411,6 +411,21 @@ struct v4l2_subdev_ops { const struct v4l2_subdev_sensor_ops *sensor; }; +/* + * Internal ops. Never call this from drivers, only the v4l2 framework can call + * these ops. + * + * registered: called when this subdev is registered. When called the v4l2_dev + * field is set to the correct v4l2_device. + * + * unregistered: called when this subdev is unregistered. When called the + * v4l2_dev field is still set to the correct v4l2_device. + */ +struct v4l2_subdev_internal_ops { + int (*registered)(struct v4l2_subdev *sd); + void (*unregistered)(struct v4l2_subdev *sd); +}; + #define V4L2_SUBDEV_NAME_SIZE 32 /* Set this flag if this subdev is a i2c device. */ @@ -427,6 +442,8 @@ struct v4l2_subdev { u32 flags; struct v4l2_device *v4l2_dev; const struct v4l2_subdev_ops *ops; + /* Never call these internal ops from within a driver! */ + const struct v4l2_subdev_internal_ops *internal_ops; /* The control handler of this subdev. May be NULL. */ struct v4l2_ctrl_handler *ctrl_handler; /* name must be unique */ -- cgit v1.2.3-70-g09d2 From 2a863793beaa0fc9ee7aeb87efe85544a6b129c0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 11 Jan 2011 14:45:03 -0300 Subject: [media] v4l2-ctrls: v4l2_ctrl_handler_setup must set is_new to 1 Renamed has_new to is_new. Drivers can use the is_new field to determine if a new value was specified for a control. The v4l2_ctrl_handler_setup() must always set this to 1 since the setup has to force a full update of all controls. Signed-off-by: Hans Verkuil Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/v4l2-controls.txt | 12 ++++++++++++ drivers/media/video/v4l2-ctrls.c | 24 ++++++++++++++---------- include/media/v4l2-ctrls.h | 6 ++++-- 3 files changed, 30 insertions(+), 12 deletions(-) diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt index 8773778d23f..881e7f44491 100644 --- a/Documentation/video4linux/v4l2-controls.txt +++ b/Documentation/video4linux/v4l2-controls.txt @@ -285,6 +285,9 @@ implement g_volatile_ctrl like this: The 'new value' union is not used in g_volatile_ctrl. In general controls that need to implement g_volatile_ctrl are read-only controls. +Note that if one or more controls in a control cluster are marked as volatile, +then all the controls in the cluster are seen as volatile. + To mark a control as volatile you have to set the is_volatile flag: ctrl = v4l2_ctrl_new_std(&sd->ctrl_handler, ...); @@ -462,6 +465,15 @@ pointer to the v4l2_ctrl_ops struct that is used for that cluster. Obviously, all controls in the cluster array must be initialized to either a valid control or to NULL. +In rare cases you might want to know which controls of a cluster actually +were set explicitly by the user. For this you can check the 'is_new' flag of +each control. For example, in the case of a volume/mute cluster the 'is_new' +flag of the mute control would be set if the user called VIDIOC_S_CTRL for +mute only. If the user would call VIDIOC_S_EXT_CTRLS for both mute and volume +controls, then the 'is_new' flag would be 1 for both controls. + +The 'is_new' flag is always 1 when called from v4l2_ctrl_handler_setup(). + VIDIOC_LOG_STATUS Support ========================= diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index 8f81efcfcf5..0d1a3d83137 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -569,7 +569,7 @@ static int user_to_new(struct v4l2_ext_control *c, int ret; u32 size; - ctrl->has_new = 1; + ctrl->is_new = 1; switch (ctrl->type) { case V4L2_CTRL_TYPE_INTEGER64: ctrl->val64 = c->value64; @@ -1280,8 +1280,12 @@ int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl) if (ctrl->done) continue; - for (i = 0; i < master->ncontrols; i++) - cur_to_new(master->cluster[i]); + for (i = 0; i < master->ncontrols; i++) { + if (master->cluster[i]) { + cur_to_new(master->cluster[i]); + master->cluster[i]->is_new = 1; + } + } /* Skip button controls and read-only controls. */ if (ctrl->type == V4L2_CTRL_TYPE_BUTTON || @@ -1645,7 +1649,7 @@ static int try_or_set_control_cluster(struct v4l2_ctrl *master, bool set) if (ctrl == NULL) continue; - if (ctrl->has_new) { + if (ctrl->is_new) { /* Double check this: it may have changed since the last check in try_or_set_ext_ctrls(). */ if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED)) @@ -1719,13 +1723,13 @@ static int try_or_set_ext_ctrls(struct v4l2_ctrl_handler *hdl, v4l2_ctrl_lock(ctrl); - /* Reset the 'has_new' flags of the cluster */ + /* Reset the 'is_new' flags of the cluster */ for (j = 0; j < master->ncontrols; j++) if (master->cluster[j]) - master->cluster[j]->has_new = 0; + master->cluster[j]->is_new = 0; /* Copy the new caller-supplied control values. - user_to_new() sets 'has_new' to 1. */ + user_to_new() sets 'is_new' to 1. */ ret = cluster_walk(i, cs, helpers, user_to_new); if (!ret) @@ -1822,13 +1826,13 @@ static int set_ctrl(struct v4l2_ctrl *ctrl, s32 *val) v4l2_ctrl_lock(ctrl); - /* Reset the 'has_new' flags of the cluster */ + /* Reset the 'is_new' flags of the cluster */ for (i = 0; i < master->ncontrols; i++) if (master->cluster[i]) - master->cluster[i]->has_new = 0; + master->cluster[i]->is_new = 0; ctrl->val = *val; - ctrl->has_new = 1; + ctrl->is_new = 1; ret = try_or_set_control_cluster(master, false); if (!ret) ret = try_or_set_control_cluster(master, true); diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h index d69ab4aae03..fcc9a0cf8ff 100644 --- a/include/media/v4l2-ctrls.h +++ b/include/media/v4l2-ctrls.h @@ -53,8 +53,10 @@ struct v4l2_ctrl_ops { * @handler: The handler that owns the control. * @cluster: Point to start of cluster array. * @ncontrols: Number of controls in cluster array. - * @has_new: Internal flag: set when there is a valid new value. * @done: Internal flag: set for each processed control. + * @is_new: Set when the user specified a new value for this control. It + * is also set when called from v4l2_ctrl_handler_setup. Drivers + * should never set this flag. * @is_private: If set, then this control is private to its handler and it * will not be added to any other handlers. Drivers can set * this flag. @@ -97,9 +99,9 @@ struct v4l2_ctrl { struct v4l2_ctrl_handler *handler; struct v4l2_ctrl **cluster; unsigned ncontrols; - unsigned int has_new:1; unsigned int done:1; + unsigned int is_new:1; unsigned int is_private:1; unsigned int is_volatile:1; -- cgit v1.2.3-70-g09d2 From 0beb6714e787ae46e1c1fc5e275452c1950ad141 Mon Sep 17 00:00:00 2001 From: Jean-François Moine Date: Thu, 13 Jan 2011 04:44:02 -0300 Subject: [media] gspca: Version change MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 3581dea3c1f..f21f2a258ae 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -55,7 +55,7 @@ MODULE_AUTHOR("Jean-François Moine "); MODULE_DESCRIPTION("GSPCA USB Camera Driver"); MODULE_LICENSE("GPL"); -#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 11, 0) +#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 12, 0) #ifdef GSPCA_DEBUG int gspca_debug = D_ERR | D_PROBE; -- cgit v1.2.3-70-g09d2 From 95c967c167785eb991cf6b22fb854dd8d61d0ff8 Mon Sep 17 00:00:00 2001 From: Jean-François Moine Date: Thu, 13 Jan 2011 05:20:29 -0300 Subject: [media] gspca: Remove __devinit, __devinitconst and __devinitdata MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit __devinit* must not be used in USB drivers. Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/benq.c | 2 +- drivers/media/video/gspca/conex.c | 4 ++-- drivers/media/video/gspca/cpia1.c | 2 +- drivers/media/video/gspca/etoms.c | 4 ++-- drivers/media/video/gspca/finepix.c | 2 +- drivers/media/video/gspca/gl860/gl860.c | 2 +- drivers/media/video/gspca/jeilinj.c | 2 +- drivers/media/video/gspca/konica.c | 2 +- drivers/media/video/gspca/m5602/m5602_core.c | 2 +- drivers/media/video/gspca/mars.c | 2 +- drivers/media/video/gspca/mr97310a.c | 2 +- drivers/media/video/gspca/ov519.c | 2 +- drivers/media/video/gspca/ov534.c | 2 +- drivers/media/video/gspca/ov534_9.c | 2 +- drivers/media/video/gspca/pac207.c | 2 +- drivers/media/video/gspca/pac7302.c | 4 ++-- drivers/media/video/gspca/pac7311.c | 4 ++-- drivers/media/video/gspca/sn9c2028.c | 2 +- drivers/media/video/gspca/sn9c20x.c | 2 +- drivers/media/video/gspca/sonixb.c | 4 ++-- drivers/media/video/gspca/sonixj.c | 2 +- drivers/media/video/gspca/spca1528.c | 2 +- drivers/media/video/gspca/spca500.c | 2 +- drivers/media/video/gspca/spca501.c | 2 +- drivers/media/video/gspca/spca505.c | 2 +- drivers/media/video/gspca/spca508.c | 2 +- drivers/media/video/gspca/spca561.c | 2 +- drivers/media/video/gspca/sq905.c | 2 +- drivers/media/video/gspca/sq905c.c | 2 +- drivers/media/video/gspca/sq930x.c | 2 +- drivers/media/video/gspca/stk014.c | 2 +- drivers/media/video/gspca/stv0680.c | 2 +- drivers/media/video/gspca/stv06xx/stv06xx.c | 2 +- drivers/media/video/gspca/sunplus.c | 2 +- drivers/media/video/gspca/t613.c | 2 +- drivers/media/video/gspca/tv8532.c | 2 +- drivers/media/video/gspca/vc032x.c | 2 +- drivers/media/video/gspca/xirlink_cit.c | 2 +- drivers/media/video/gspca/zc3xx.c | 2 +- 39 files changed, 44 insertions(+), 44 deletions(-) diff --git a/drivers/media/video/gspca/benq.c b/drivers/media/video/gspca/benq.c index 62904393350..a09c4709d61 100644 --- a/drivers/media/video/gspca/benq.c +++ b/drivers/media/video/gspca/benq.c @@ -276,7 +276,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x04a5, 0x3035)}, {} }; diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c index 1eacb6c7926..8b398493f96 100644 --- a/drivers/media/video/gspca/conex.c +++ b/drivers/media/video/gspca/conex.c @@ -1040,14 +1040,14 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const struct usb_device_id device_table[] __devinitconst = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0572, 0x0041)}, {} }; MODULE_DEVICE_TABLE(usb, device_table); /* -- device connect -- */ -static int __devinit sd_probe(struct usb_interface *intf, +static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), diff --git a/drivers/media/video/gspca/cpia1.c b/drivers/media/video/gspca/cpia1.c index c1ae05f4661..4bf2cab98d6 100644 --- a/drivers/media/video/gspca/cpia1.c +++ b/drivers/media/video/gspca/cpia1.c @@ -2088,7 +2088,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0553, 0x0002)}, {USB_DEVICE(0x0813, 0x0001)}, {} diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c index a594b36d619..4b2c483fce6 100644 --- a/drivers/media/video/gspca/etoms.c +++ b/drivers/media/video/gspca/etoms.c @@ -864,7 +864,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const struct usb_device_id device_table[] __devinitconst = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x102c, 0x6151), .driver_info = SENSOR_PAS106}, #if !defined CONFIG_USB_ET61X251 && !defined CONFIG_USB_ET61X251_MODULE {USB_DEVICE(0x102c, 0x6251), .driver_info = SENSOR_TAS5130CXX}, @@ -875,7 +875,7 @@ static const struct usb_device_id device_table[] __devinitconst = { MODULE_DEVICE_TABLE(usb, device_table); /* -- device connect -- */ -static int __devinit sd_probe(struct usb_interface *intf, +static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), diff --git a/drivers/media/video/gspca/finepix.c b/drivers/media/video/gspca/finepix.c index d78226455d1..987b4b69d7a 100644 --- a/drivers/media/video/gspca/finepix.c +++ b/drivers/media/video/gspca/finepix.c @@ -229,7 +229,7 @@ static void sd_stop0(struct gspca_dev *gspca_dev) } /* Table of supported USB devices */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x04cb, 0x0104)}, {USB_DEVICE(0x04cb, 0x0109)}, {USB_DEVICE(0x04cb, 0x010b)}, diff --git a/drivers/media/video/gspca/gl860/gl860.c b/drivers/media/video/gspca/gl860/gl860.c index b05bec7321b..99083038cec 100644 --- a/drivers/media/video/gspca/gl860/gl860.c +++ b/drivers/media/video/gspca/gl860/gl860.c @@ -488,7 +488,7 @@ static void sd_callback(struct gspca_dev *gspca_dev) /*=================== USB driver structure initialisation ==================*/ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x05e3, 0x0503)}, {USB_DEVICE(0x05e3, 0xf191)}, {} diff --git a/drivers/media/video/gspca/jeilinj.c b/drivers/media/video/gspca/jeilinj.c index a35e87bb038..06b777f5379 100644 --- a/drivers/media/video/gspca/jeilinj.c +++ b/drivers/media/video/gspca/jeilinj.c @@ -314,7 +314,7 @@ static int sd_start(struct gspca_dev *gspca_dev) } /* Table of supported USB devices */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0979, 0x0280)}, {} }; diff --git a/drivers/media/video/gspca/konica.c b/drivers/media/video/gspca/konica.c index d2ce65dcbfd..5964691c0e9 100644 --- a/drivers/media/video/gspca/konica.c +++ b/drivers/media/video/gspca/konica.c @@ -607,7 +607,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x04c8, 0x0720)}, /* Intel YC 76 */ {} }; diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c index c872b93a335..a7722b1aef9 100644 --- a/drivers/media/video/gspca/m5602/m5602_core.c +++ b/drivers/media/video/gspca/m5602/m5602_core.c @@ -28,7 +28,7 @@ int force_sensor; static int dump_bridge; int dump_sensor; -static const __devinitdata struct usb_device_id m5602_table[] = { +static const struct usb_device_id m5602_table[] = { {USB_DEVICE(0x0402, 0x5602)}, {} }; diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c index a81536e7869..cb4d0bf0d78 100644 --- a/drivers/media/video/gspca/mars.c +++ b/drivers/media/video/gspca/mars.c @@ -490,7 +490,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x050f)}, {} }; diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c index 7607a288b51..3884c9d300c 100644 --- a/drivers/media/video/gspca/mr97310a.c +++ b/drivers/media/video/gspca/mr97310a.c @@ -1229,7 +1229,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x08ca, 0x0110)}, /* Trust Spyc@m 100 */ {USB_DEVICE(0x08ca, 0x0111)}, /* Aiptek Pencam VGA+ */ {USB_DEVICE(0x093a, 0x010f)}, /* All other known MR97310A VGA cams */ diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index e1c3b9328ac..e30791f0569 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -4747,7 +4747,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x4003), .driver_info = BRIDGE_W9968CF }, {USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 }, {USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 }, diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c index 0edf93973b1..ba8e56c3fc8 100644 --- a/drivers/media/video/gspca/ov534.c +++ b/drivers/media/video/gspca/ov534.c @@ -1289,7 +1289,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x1415, 0x2000)}, {} }; diff --git a/drivers/media/video/gspca/ov534_9.c b/drivers/media/video/gspca/ov534_9.c index c5244b4b477..aaf5428c57f 100644 --- a/drivers/media/video/gspca/ov534_9.c +++ b/drivers/media/video/gspca/ov534_9.c @@ -1429,7 +1429,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x06f8, 0x3003)}, {} }; diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c index 96f9986305b..81739a2f205 100644 --- a/drivers/media/video/gspca/pac207.c +++ b/drivers/media/video/gspca/pac207.c @@ -530,7 +530,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x4028)}, {USB_DEVICE(0x093a, 0x2460)}, {USB_DEVICE(0x093a, 0x2461)}, diff --git a/drivers/media/video/gspca/pac7302.c b/drivers/media/video/gspca/pac7302.c index 2700975abce..5615d7bd830 100644 --- a/drivers/media/video/gspca/pac7302.c +++ b/drivers/media/video/gspca/pac7302.c @@ -1184,7 +1184,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const struct usb_device_id device_table[] __devinitconst = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x06f8, 0x3009)}, {USB_DEVICE(0x093a, 0x2620)}, {USB_DEVICE(0x093a, 0x2621)}, @@ -1201,7 +1201,7 @@ static const struct usb_device_id device_table[] __devinitconst = { MODULE_DEVICE_TABLE(usb, device_table); /* -- device connect -- */ -static int __devinit sd_probe(struct usb_interface *intf, +static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index 6820f5d58b1..f8801b50e64 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -837,7 +837,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const struct usb_device_id device_table[] __devinitconst = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x093a, 0x2600)}, {USB_DEVICE(0x093a, 0x2601)}, {USB_DEVICE(0x093a, 0x2603)}, @@ -849,7 +849,7 @@ static const struct usb_device_id device_table[] __devinitconst = { MODULE_DEVICE_TABLE(usb, device_table); /* -- device connect -- */ -static int __devinit sd_probe(struct usb_interface *intf, +static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), diff --git a/drivers/media/video/gspca/sn9c2028.c b/drivers/media/video/gspca/sn9c2028.c index 40a06680502..4271f86dfe0 100644 --- a/drivers/media/video/gspca/sn9c2028.c +++ b/drivers/media/video/gspca/sn9c2028.c @@ -703,7 +703,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0458, 0x7005)}, /* Genius Smart 300, version 2 */ /* The Genius Smart is untested. I can't find an owner ! */ /* {USB_DEVICE(0x0c45, 0x8000)}, DC31VC, Don't know this camera */ diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c index cb08d00d0a3..fcf29897b71 100644 --- a/drivers/media/video/gspca/sn9c20x.c +++ b/drivers/media/video/gspca/sn9c20x.c @@ -2470,7 +2470,7 @@ static const struct sd_desc sd_desc = { | (SENSOR_ ## sensor << 8) \ | (i2c_addr) -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x6240), SN9C20X(MT9M001, 0x5d, 0)}, {USB_DEVICE(0x0c45, 0x6242), SN9C20X(MT9M111, 0x5d, 0)}, {USB_DEVICE(0x0c45, 0x6248), SN9C20X(OV9655, 0x30, 0)}, diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index e45d1cfb446..c6cd68d66b5 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -1565,7 +1565,7 @@ static const struct sd_desc sd_desc = { .driver_info = (SENSOR_ ## sensor << 8) | BRIDGE_ ## bridge -static const struct usb_device_id device_table[] __devinitconst = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0c45, 0x6001), SB(TAS5110C, 102)}, /* TAS5110C1B */ {USB_DEVICE(0x0c45, 0x6005), SB(TAS5110C, 101)}, /* TAS5110C1B */ {USB_DEVICE(0x0c45, 0x6007), SB(TAS5110D, 101)}, /* TAS5110D */ @@ -1599,7 +1599,7 @@ static const struct usb_device_id device_table[] __devinitconst = { MODULE_DEVICE_TABLE(usb, device_table); /* -- device connect -- */ -static int __devinit sd_probe(struct usb_interface *intf, +static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id) { return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index db35391d00e..3e41653f11c 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -2909,7 +2909,7 @@ static const struct sd_desc sd_desc = { .driver_info = (BRIDGE_ ## bridge << 16) \ | (SENSOR_ ## sensor << 8) \ | (flags) -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)}, {USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)}, {USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, PDN_INV)}, diff --git a/drivers/media/video/gspca/spca1528.c b/drivers/media/video/gspca/spca1528.c index e6433866441..76c006b2bc8 100644 --- a/drivers/media/video/gspca/spca1528.c +++ b/drivers/media/video/gspca/spca1528.c @@ -555,7 +555,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x04fc, 0x1528)}, {} }; diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c index 8e202b9039f..45552c3ff8d 100644 --- a/drivers/media/video/gspca/spca500.c +++ b/drivers/media/video/gspca/spca500.c @@ -1051,7 +1051,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x040a, 0x0300), .driver_info = KodakEZ200}, {USB_DEVICE(0x041e, 0x400a), .driver_info = CreativePCCam300}, {USB_DEVICE(0x046d, 0x0890), .driver_info = LogitechTraveler}, diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c index 642839a11e8..f7ef282cc60 100644 --- a/drivers/media/video/gspca/spca501.c +++ b/drivers/media/video/gspca/spca501.c @@ -2155,7 +2155,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x040a, 0x0002), .driver_info = KodakDVC325}, {USB_DEVICE(0x0497, 0xc001), .driver_info = SmileIntlCamera}, {USB_DEVICE(0x0506, 0x00df), .driver_info = ThreeComHomeConnectLite}, diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c index bc9dd9034ab..e5bf865147d 100644 --- a/drivers/media/video/gspca/spca505.c +++ b/drivers/media/video/gspca/spca505.c @@ -786,7 +786,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x401d), .driver_info = Nxultra}, {USB_DEVICE(0x0733, 0x0430), .driver_info = IntelPCCameraPro}, /*fixme: may be UsbGrabberPV321 BRIDGE_SPCA506 SENSOR_SAA7113 */ diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c index 7307638ac91..34831937152 100644 --- a/drivers/media/video/gspca/spca508.c +++ b/drivers/media/video/gspca/spca508.c @@ -1509,7 +1509,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0130, 0x0130), .driver_info = HamaUSBSightcam}, {USB_DEVICE(0x041e, 0x4018), .driver_info = CreativeVista}, {USB_DEVICE(0x0733, 0x0110), .driver_info = ViewQuestVQ110}, diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index 3a162c6d546..e836e778dfb 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -1061,7 +1061,7 @@ static const struct sd_desc *sd_desc[2] = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x401a), .driver_info = Rev072A}, {USB_DEVICE(0x041e, 0x403b), .driver_info = Rev012A}, {USB_DEVICE(0x0458, 0x7004), .driver_info = Rev072A}, diff --git a/drivers/media/video/gspca/sq905.c b/drivers/media/video/gspca/sq905.c index 40406774577..2e9c0617519 100644 --- a/drivers/media/video/gspca/sq905.c +++ b/drivers/media/video/gspca/sq905.c @@ -396,7 +396,7 @@ static int sd_start(struct gspca_dev *gspca_dev) } /* Table of supported USB devices */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x2770, 0x9120)}, {} }; diff --git a/drivers/media/video/gspca/sq905c.c b/drivers/media/video/gspca/sq905c.c index 8ba19954385..457563b7a71 100644 --- a/drivers/media/video/gspca/sq905c.c +++ b/drivers/media/video/gspca/sq905c.c @@ -298,7 +298,7 @@ static int sd_start(struct gspca_dev *gspca_dev) } /* Table of supported USB devices */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x2770, 0x905c)}, {USB_DEVICE(0x2770, 0x9050)}, {USB_DEVICE(0x2770, 0x9051)}, diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c index a4a98811b9e..8215d5dcd45 100644 --- a/drivers/media/video/gspca/sq930x.c +++ b/drivers/media/video/gspca/sq930x.c @@ -1163,7 +1163,7 @@ static const struct sd_desc sd_desc = { #define ST(sensor, type) \ .driver_info = (SENSOR_ ## sensor << 8) \ | (type) -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x4038), ST(MI0360, 0)}, {USB_DEVICE(0x041e, 0x403c), ST(LZ24BP, 0)}, {USB_DEVICE(0x041e, 0x403d), ST(LZ24BP, 0)}, diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c index 11a192b95ed..87be52b5e1e 100644 --- a/drivers/media/video/gspca/stk014.c +++ b/drivers/media/video/gspca/stk014.c @@ -495,7 +495,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x05e1, 0x0893)}, {} }; diff --git a/drivers/media/video/gspca/stv0680.c b/drivers/media/video/gspca/stv0680.c index b199ad4666b..e2ef41cf72d 100644 --- a/drivers/media/video/gspca/stv0680.c +++ b/drivers/media/video/gspca/stv0680.c @@ -327,7 +327,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0553, 0x0202)}, {USB_DEVICE(0x041e, 0x4007)}, {} diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c index 28ea4175b80..7e066142929 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx.c @@ -564,7 +564,7 @@ static int stv06xx_config(struct gspca_dev *gspca_dev, /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { /* QuickCam Express */ {USB_DEVICE(0x046d, 0x0840), .driver_info = BRIDGE_STV600 }, /* LEGO cam / QuickCam Web */ diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index a9cbcd6011d..543542af272 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -1162,7 +1162,7 @@ static const struct sd_desc sd_desc = { #define BS(bridge, subtype) \ .driver_info = (BRIDGE_ ## bridge << 8) \ | (subtype) -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x400b), BS(SPCA504C, 0)}, {USB_DEVICE(0x041e, 0x4012), BS(SPCA504C, 0)}, {USB_DEVICE(0x041e, 0x4013), BS(SPCA504C, 0)}, diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c index 8f0c33116e0..a3eccd81576 100644 --- a/drivers/media/video/gspca/t613.c +++ b/drivers/media/video/gspca/t613.c @@ -1416,7 +1416,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x17a1, 0x0128)}, {} }; diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c index 38c22f0a426..933ef2ca658 100644 --- a/drivers/media/video/gspca/tv8532.c +++ b/drivers/media/video/gspca/tv8532.c @@ -388,7 +388,7 @@ static const struct sd_desc sd_desc = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x046d, 0x0920)}, {USB_DEVICE(0x046d, 0x0921)}, {USB_DEVICE(0x0545, 0x808b)}, diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index 9b2ae1b6cc7..6caed734a06 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -4192,7 +4192,7 @@ static const struct sd_desc sd_desc = { #define BF(bridge, flags) \ .driver_info = (BRIDGE_ ## bridge << 8) \ | (flags) -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x405b), BF(VC0323, FL_VFLIP)}, {USB_DEVICE(0x046d, 0x0892), BF(VC0321, 0)}, {USB_DEVICE(0x046d, 0x0896), BF(VC0321, 0)}, diff --git a/drivers/media/video/gspca/xirlink_cit.c b/drivers/media/video/gspca/xirlink_cit.c index 5b5039a0203..c089a0f6f1d 100644 --- a/drivers/media/video/gspca/xirlink_cit.c +++ b/drivers/media/video/gspca/xirlink_cit.c @@ -3270,7 +3270,7 @@ static const struct sd_desc sd_desc_isoc_nego = { }; /* -- module initialisation -- */ -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { { USB_DEVICE_VER(0x0545, 0x8080, 0x0001, 0x0001), .driver_info = CIT_MODEL0 }, { USB_DEVICE_VER(0x0545, 0x8080, 0x0002, 0x0002), .driver_info = CIT_MODEL1 }, { USB_DEVICE_VER(0x0545, 0x8080, 0x030a, 0x030a), .driver_info = CIT_MODEL2 }, diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index 14b85d48316..865216e9362 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -6909,7 +6909,7 @@ static const struct sd_desc sd_desc = { #endif }; -static const __devinitdata struct usb_device_id device_table[] = { +static const struct usb_device_id device_table[] = { {USB_DEVICE(0x041e, 0x041e)}, {USB_DEVICE(0x041e, 0x4017)}, {USB_DEVICE(0x041e, 0x401c), .driver_info = SENSOR_PAS106}, -- cgit v1.2.3-70-g09d2 From ded5e903b75a9e2a9349e19063e3b2a63b05e828 Mon Sep 17 00:00:00 2001 From: Jean-François Moine Date: Thu, 13 Jan 2011 05:27:37 -0300 Subject: [media] gspca: Remove useless instructions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/jpeg.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/jpeg.h b/drivers/media/video/gspca/jpeg.h index de63c36806c..ab54910418b 100644 --- a/drivers/media/video/gspca/jpeg.h +++ b/drivers/media/video/gspca/jpeg.h @@ -141,9 +141,9 @@ static void jpeg_define(u8 *jpeg_hdr, memcpy(jpeg_hdr, jpeg_head, sizeof jpeg_head); #ifndef CONEX_CAM jpeg_hdr[JPEG_HEIGHT_OFFSET + 0] = height >> 8; - jpeg_hdr[JPEG_HEIGHT_OFFSET + 1] = height & 0xff; + jpeg_hdr[JPEG_HEIGHT_OFFSET + 1] = height; jpeg_hdr[JPEG_HEIGHT_OFFSET + 2] = width >> 8; - jpeg_hdr[JPEG_HEIGHT_OFFSET + 3] = width & 0xff; + jpeg_hdr[JPEG_HEIGHT_OFFSET + 3] = width; jpeg_hdr[JPEG_HEIGHT_OFFSET + 6] = samplesY; #endif } -- cgit v1.2.3-70-g09d2 From fc63de88e0f27ecdaab4d2d836fd7bacab643fc0 Mon Sep 17 00:00:00 2001 From: Jean-François Moine Date: Thu, 13 Jan 2011 05:35:18 -0300 Subject: [media] gspca - ov519: Cleanup source and add a comment MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov519.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index e30791f0569..8ab2c452c25 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -488,7 +488,6 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = { #define R511_SNAP_PXDIV 0x1c #define R511_SNAP_LNDIV 0x1d #define R511_SNAP_UV_EN 0x1e -#define R511_SNAP_UV_EN 0x1e #define R511_SNAP_OPTS 0x1f #define R511_DRAM_FLOW_CTL 0x20 @@ -1847,8 +1846,7 @@ static const struct ov_i2c_regvals norm_7670[] = { { 0x6c, 0x0a }, { 0x6d, 0x55 }, { 0x6e, 0x11 }, - { 0x6f, 0x9f }, - /* "9e for advance AWB" */ + { 0x6f, 0x9f }, /* "9e for advance AWB" */ { 0x6a, 0x40 }, { OV7670_R01_BLUE, 0x40 }, { OV7670_R02_RED, 0x60 }, @@ -3054,7 +3052,7 @@ static void ov519_configure(struct sd *sd) { static const struct ov_regvals init_519[] = { { 0x5a, 0x6d }, /* EnableSystem */ - { 0x53, 0x9b }, + { 0x53, 0x9b }, /* don't enable the microcontroller */ { OV519_R54_EN_CLK1, 0xff }, /* set bit2 to enable jpeg */ { 0x5d, 0x03 }, { 0x49, 0x01 }, -- cgit v1.2.3-70-g09d2 From ddffa49e257e2b28e23f1e2729c0560bcad89937 Mon Sep 17 00:00:00 2001 From: Jean-François Moine Date: Thu, 13 Jan 2011 05:49:47 -0300 Subject: [media] gspca - ov534: Clearer debug messages MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov534.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c index ba8e56c3fc8..a837f2942a8 100644 --- a/drivers/media/video/gspca/ov534.c +++ b/drivers/media/video/gspca/ov534.c @@ -479,7 +479,7 @@ static void ov534_reg_write(struct gspca_dev *gspca_dev, u16 reg, u8 val) struct usb_device *udev = gspca_dev->dev; int ret; - PDEBUG(D_USBO, "reg=0x%04x, val=0%02x", reg, val); + PDEBUG(D_USBO, "SET 01 0000 %04x %02x", reg, val); gspca_dev->usb_buf[0] = val; ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), @@ -500,7 +500,7 @@ static u8 ov534_reg_read(struct gspca_dev *gspca_dev, u16 reg) 0x01, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x00, reg, gspca_dev->usb_buf, 1, CTRL_TIMEOUT); - PDEBUG(D_USBI, "reg=0x%04x, data=0x%02x", reg, gspca_dev->usb_buf[0]); + PDEBUG(D_USBI, "GET 01 0000 %04x %02x", reg, gspca_dev->usb_buf[0]); if (ret < 0) err("read failed %d", ret); return gspca_dev->usb_buf[0]; @@ -558,7 +558,7 @@ static int sccb_check_status(struct gspca_dev *gspca_dev) static void sccb_reg_write(struct gspca_dev *gspca_dev, u8 reg, u8 val) { - PDEBUG(D_USBO, "reg: 0x%02x, val: 0x%02x", reg, val); + PDEBUG(D_USBO, "sccb write: %02x %02x", reg, val); ov534_reg_write(gspca_dev, OV534_REG_SUBADDR, reg); ov534_reg_write(gspca_dev, OV534_REG_WRITE, val); ov534_reg_write(gspca_dev, OV534_REG_OPERATION, OV534_OP_WRITE_3); -- cgit v1.2.3-70-g09d2 From 14b67c2969ebf50bd5534b2a0c441f8569a9361e Mon Sep 17 00:00:00 2001 From: Jean-François Moine Date: Thu, 13 Jan 2011 05:58:04 -0300 Subject: [media] gspca - ov534: Propagate errors to higher level MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov534.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c index a837f2942a8..04da2280273 100644 --- a/drivers/media/video/gspca/ov534.c +++ b/drivers/media/video/gspca/ov534.c @@ -479,6 +479,9 @@ static void ov534_reg_write(struct gspca_dev *gspca_dev, u16 reg, u8 val) struct usb_device *udev = gspca_dev->dev; int ret; + if (gspca_dev->usb_err < 0) + return; + PDEBUG(D_USBO, "SET 01 0000 %04x %02x", reg, val); gspca_dev->usb_buf[0] = val; ret = usb_control_msg(udev, @@ -486,8 +489,10 @@ static void ov534_reg_write(struct gspca_dev *gspca_dev, u16 reg, u8 val) 0x01, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x00, reg, gspca_dev->usb_buf, 1, CTRL_TIMEOUT); - if (ret < 0) + if (ret < 0) { err("write failed %d", ret); + gspca_dev->usb_err = ret; + } } static u8 ov534_reg_read(struct gspca_dev *gspca_dev, u16 reg) @@ -495,14 +500,18 @@ static u8 ov534_reg_read(struct gspca_dev *gspca_dev, u16 reg) struct usb_device *udev = gspca_dev->dev; int ret; + if (gspca_dev->usb_err < 0) + return 0; ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x01, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x00, reg, gspca_dev->usb_buf, 1, CTRL_TIMEOUT); PDEBUG(D_USBI, "GET 01 0000 %04x %02x", reg, gspca_dev->usb_buf[0]); - if (ret < 0) + if (ret < 0) { err("read failed %d", ret); + gspca_dev->usb_err = ret; + } return gspca_dev->usb_buf[0]; } @@ -563,8 +572,10 @@ static void sccb_reg_write(struct gspca_dev *gspca_dev, u8 reg, u8 val) ov534_reg_write(gspca_dev, OV534_REG_WRITE, val); ov534_reg_write(gspca_dev, OV534_REG_OPERATION, OV534_OP_WRITE_3); - if (!sccb_check_status(gspca_dev)) + if (!sccb_check_status(gspca_dev)) { err("sccb_reg_write failed"); + gspca_dev->usb_err = -EIO; + } } static u8 sccb_reg_read(struct gspca_dev *gspca_dev, u16 reg) @@ -885,7 +896,7 @@ static int sd_init(struct gspca_dev *gspca_dev) ov534_set_led(gspca_dev, 0); set_frame_rate(gspca_dev); - return 0; + return gspca_dev->usb_err; } static int sd_start(struct gspca_dev *gspca_dev) @@ -920,7 +931,7 @@ static int sd_start(struct gspca_dev *gspca_dev) ov534_set_led(gspca_dev, 1); ov534_reg_write(gspca_dev, 0xe0, 0x00); - return 0; + return gspca_dev->usb_err; } static void sd_stopN(struct gspca_dev *gspca_dev) -- cgit v1.2.3-70-g09d2 From 3afef85bfefa65a31f4dbf8e7921c7938adb24f4 Mon Sep 17 00:00:00 2001 From: Jean-François Moine Date: Thu, 13 Jan 2011 06:39:11 -0300 Subject: [media] gspca - sonixj: Infrared bug fix and enhancement MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The infrared was set by sensor write instead of bridge GPIO. It is now settable by the standard control ILLUMINATOR_1. A module parameter permits to set the right GPIO bit according to the StarCam model. Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 80 ++++++++++++++++++-------------------- 1 file changed, 38 insertions(+), 42 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 3e41653f11c..c634dc113f9 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -25,12 +25,12 @@ #include "gspca.h" #include "jpeg.h" -#define V4L2_CID_INFRARED (V4L2_CID_PRIVATE_BASE + 0) - MODULE_AUTHOR("Jean-François Moine "); MODULE_DESCRIPTION("GSPCA/SONIX JPEG USB Camera Driver"); MODULE_LICENSE("GPL"); +static int starcam; + /* controls */ enum e_ctrl { BRIGHTNESS, @@ -43,7 +43,7 @@ enum e_ctrl { HFLIP, VFLIP, SHARPNESS, - INFRARED, + ILLUM, FREQ, NCTRLS /* number of controls */ }; @@ -100,7 +100,8 @@ enum sensors { }; /* device flags */ -#define PDN_INV 1 /* inverse pin S_PWR_DN / sn_xxx tables */ +#define F_PDN_INV 0x01 /* inverse pin S_PWR_DN / sn_xxx tables */ +#define F_ILLUM 0x02 /* presence of illuminator */ /* sn9c1xx definitions */ /* register 0x01 */ @@ -124,7 +125,7 @@ static void setgamma(struct gspca_dev *gspca_dev); static void setautogain(struct gspca_dev *gspca_dev); static void sethvflip(struct gspca_dev *gspca_dev); static void setsharpness(struct gspca_dev *gspca_dev); -static void setinfrared(struct gspca_dev *gspca_dev); +static void setillum(struct gspca_dev *gspca_dev); static void setfreq(struct gspca_dev *gspca_dev); static const struct ctrl sd_ctrls[NCTRLS] = { @@ -251,18 +252,17 @@ static const struct ctrl sd_ctrls[NCTRLS] = { }, .set_control = setsharpness }, -/* mt9v111 only */ -[INFRARED] = { +[ILLUM] = { { - .id = V4L2_CID_INFRARED, + .id = V4L2_CID_ILLUMINATORS_1, .type = V4L2_CTRL_TYPE_BOOLEAN, - .name = "Infrared", + .name = "Illuminator / infrared", .minimum = 0, .maximum = 1, .step = 1, .default_value = 0, }, - .set_control = setinfrared + .set_control = setillum }, /* ov7630/ov7648/ov7660 only */ [FREQ] = { @@ -282,32 +282,26 @@ static const struct ctrl sd_ctrls[NCTRLS] = { /* table of the disabled controls */ static const __u32 ctrl_dis[] = { [SENSOR_ADCM1700] = (1 << AUTOGAIN) | - (1 << INFRARED) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_GC0307] = (1 << INFRARED) | - (1 << HFLIP) | +[SENSOR_GC0307] = (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_HV7131R] = (1 << INFRARED) | - (1 << HFLIP) | +[SENSOR_HV7131R] = (1 << HFLIP) | (1 << FREQ), -[SENSOR_MI0360] = (1 << INFRARED) | - (1 << HFLIP) | +[SENSOR_MI0360] = (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_MI0360B] = (1 << INFRARED) | - (1 << HFLIP) | +[SENSOR_MI0360B] = (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_MO4000] = (1 << INFRARED) | - (1 << HFLIP) | +[SENSOR_MO4000] = (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), @@ -315,40 +309,32 @@ static const __u32 ctrl_dis[] = { (1 << VFLIP) | (1 << FREQ), -[SENSOR_OM6802] = (1 << INFRARED) | - (1 << HFLIP) | +[SENSOR_OM6802] = (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), -[SENSOR_OV7630] = (1 << INFRARED) | - (1 << HFLIP), +[SENSOR_OV7630] = (1 << HFLIP), -[SENSOR_OV7648] = (1 << INFRARED) | - (1 << HFLIP), +[SENSOR_OV7648] = (1 << HFLIP), [SENSOR_OV7660] = (1 << AUTOGAIN) | - (1 << INFRARED) | (1 << HFLIP) | (1 << VFLIP), [SENSOR_PO1030] = (1 << AUTOGAIN) | - (1 << INFRARED) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), [SENSOR_PO2030N] = (1 << AUTOGAIN) | - (1 << INFRARED) | (1 << FREQ), [SENSOR_SOI768] = (1 << AUTOGAIN) | - (1 << INFRARED) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), [SENSOR_SP80708] = (1 << AUTOGAIN) | - (1 << INFRARED) | (1 << HFLIP) | (1 << VFLIP) | (1 << FREQ), @@ -1876,6 +1862,8 @@ static int sd_init(struct gspca_dev *gspca_dev) sd->i2c_addr = sn9c1xx[9]; gspca_dev->ctrl_dis = ctrl_dis[sd->sensor]; + if (!(sd->flags & F_ILLUM)) + gspca_dev->ctrl_dis |= (1 << ILLUM); return gspca_dev->usb_err; } @@ -2199,16 +2187,20 @@ static void setsharpness(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x99, sd->ctrls[SHARPNESS].val); } -static void setinfrared(struct gspca_dev *gspca_dev) +static void setillum(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - if (gspca_dev->ctrl_dis & (1 << INFRARED)) + if (gspca_dev->ctrl_dis & (1 << ILLUM)) return; -/*fixme: different sequence for StarCam Clip and StarCam 370i */ -/* Clip */ - i2c_w1(gspca_dev, 0x02, /* gpio */ - sd->ctrls[INFRARED].val ? 0x66 : 0x64); + if (starcam) + reg_w1(gspca_dev, 0x02, /* gpio */ + sd->ctrls[ILLUM].val ? + 0x55 : 0x54); /* 370i */ + else + reg_w1(gspca_dev, 0x02, + sd->ctrls[ILLUM].val ? + 0x66 : 0x64); /* Clip */ } static void setfreq(struct gspca_dev *gspca_dev) @@ -2346,7 +2338,7 @@ static int sd_start(struct gspca_dev *gspca_dev) /* sensor clock already enabled in sd_init */ /* reg_w1(gspca_dev, 0xf1, 0x00); */ reg01 = sn9c1xx[1]; - if (sd->flags & PDN_INV) + if (sd->flags & F_PDN_INV) reg01 ^= S_PDN_INV; /* power down inverted */ reg_w1(gspca_dev, 0x01, reg01); @@ -2912,8 +2904,8 @@ static const struct sd_desc sd_desc = { static const struct usb_device_id device_table[] = { {USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)}, {USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)}, - {USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, PDN_INV)}, - {USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, PDN_INV)}, + {USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, F_PDN_INV)}, + {USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, F_PDN_INV)}, {USB_DEVICE(0x0471, 0x0327), BS(SN9C105, MI0360)}, {USB_DEVICE(0x0471, 0x0328), BS(SN9C105, MI0360)}, {USB_DEVICE(0x0471, 0x0330), BS(SN9C105, MI0360)}, @@ -2925,7 +2917,7 @@ static const struct usb_device_id device_table[] = { /* {USB_DEVICE(0x0c45, 0x607b), BS(SN9C102P, OV7660)}, */ {USB_DEVICE(0x0c45, 0x607c), BS(SN9C102P, HV7131R)}, /* {USB_DEVICE(0x0c45, 0x607e), BS(SN9C102P, OV7630)}, */ - {USB_DEVICE(0x0c45, 0x60c0), BS(SN9C105, MI0360)}, + {USB_DEVICE(0x0c45, 0x60c0), BSF(SN9C105, MI0360, F_ILLUM)}, /* or MT9V111 */ /* {USB_DEVICE(0x0c45, 0x60c2), BS(SN9C105, P1030xC)}, */ /* {USB_DEVICE(0x0c45, 0x60c8), BS(SN9C105, OM6802)}, */ @@ -3004,3 +2996,7 @@ static void __exit sd_mod_exit(void) module_init(sd_mod_init); module_exit(sd_mod_exit); + +module_param(starcam, int, 0644); +MODULE_PARM_DESC(starcam, + "StarCam model. 0: Clip, 1: 370i"); -- cgit v1.2.3-70-g09d2 From a63d601803c2e3ba06ed51b9ed997fc6bf80e5bf Mon Sep 17 00:00:00 2001 From: Jean-François Moine Date: Thu, 13 Jan 2011 07:56:00 -0300 Subject: [media] gspca - sonixj: Add LED (illuminator) control to the webcam 0c45:614a MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jean-François Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index c634dc113f9..d6f39ce1b7e 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -2193,14 +2193,22 @@ static void setillum(struct gspca_dev *gspca_dev) if (gspca_dev->ctrl_dis & (1 << ILLUM)) return; - if (starcam) - reg_w1(gspca_dev, 0x02, /* gpio */ - sd->ctrls[ILLUM].val ? - 0x55 : 0x54); /* 370i */ - else - reg_w1(gspca_dev, 0x02, - sd->ctrls[ILLUM].val ? - 0x66 : 0x64); /* Clip */ + switch (sd->sensor) { + case SENSOR_ADCM1700: + reg_w1(gspca_dev, 0x02, /* gpio */ + sd->ctrls[ILLUM].val ? 0x64 : 0x60); + break; + case SENSOR_MT9V111: + if (starcam) + reg_w1(gspca_dev, 0x02, + sd->ctrls[ILLUM].val ? + 0x55 : 0x54); /* 370i */ + else + reg_w1(gspca_dev, 0x02, + sd->ctrls[ILLUM].val ? + 0x66 : 0x64); /* Clip */ + break; + } } static void setfreq(struct gspca_dev *gspca_dev) @@ -2959,7 +2967,7 @@ static const struct usb_device_id device_table[] = { /* or GC0305 / GC0307 */ {USB_DEVICE(0x0c45, 0x6143), BS(SN9C120, SP80708)}, /*sn9c120b*/ {USB_DEVICE(0x0c45, 0x6148), BS(SN9C120, OM6802)}, /*sn9c120b*/ - {USB_DEVICE(0x0c45, 0x614a), BS(SN9C120, ADCM1700)}, /*sn9c120b*/ + {USB_DEVICE(0x0c45, 0x614a), BSF(SN9C120, ADCM1700, F_ILLUM)}, /* {USB_DEVICE(0x0c45, 0x614c), BS(SN9C120, GC0306)}, */ /*sn9c120b*/ {} }; -- cgit v1.2.3-70-g09d2 From 36fd97884daf4e30b556a6c59b58db19a06d58af Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 2 Jan 2011 16:14:03 -0300 Subject: [media] frontends/ix2505v: Remember to free allocated memory in failure path We may leak the storage allocated to 'state' in drivers/media/dvb/frontends/ix2505v.c::ix2505v_attach() on error, as it is too early to be able to call ix2505v_release(). This patch makes sure we free the allocated memory in the failure case. Signed-off-by: Jesper Juhl Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/ix2505v.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/ix2505v.c b/drivers/media/dvb/frontends/ix2505v.c index 6360c681ded..6c2e929bd79 100644 --- a/drivers/media/dvb/frontends/ix2505v.c +++ b/drivers/media/dvb/frontends/ix2505v.c @@ -311,7 +311,7 @@ struct dvb_frontend *ix2505v_attach(struct dvb_frontend *fe, return fe; error: - ix2505v_release(fe); + kfree(state); return NULL; } EXPORT_SYMBOL(ix2505v_attach); -- cgit v1.2.3-70-g09d2 From fd01ad98945073faeb25391489caef4844f265c4 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 2 Jan 2011 17:57:24 -0300 Subject: [media] media, tlg2300: Fix memory leak in alloc_bulk_urbs_generic() Hi, While reading drivers/media/video/tlg2300/pd-video.c::alloc_bulk_urbs_generic() I noticed that - We don't free the memory allocated to 'urb' if the call to usb_alloc_coherent() fails. - If the 'num' argument to the function is ever <= 0 we'll return an uninitialized variable 'i' to the caller. The following patch addresses both of the above by a) calling usb_free_urb() when usb_alloc_coherent() fails and by explicitly initializing 'i' to zero. I also moved the variables 'mem' and 'urb' inside the for loop. This does not actually make any difference, it just seemed more correct to me to let variables exist only in the innermost scope they are used. Signed-off-by: Jesper Juhl Acked-by: Huang Shijie Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tlg2300/pd-video.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/tlg2300/pd-video.c b/drivers/media/video/tlg2300/pd-video.c index a1ffe18640f..df33a1d188b 100644 --- a/drivers/media/video/tlg2300/pd-video.c +++ b/drivers/media/video/tlg2300/pd-video.c @@ -512,19 +512,20 @@ int alloc_bulk_urbs_generic(struct urb **urb_array, int num, int buf_size, gfp_t gfp_flags, usb_complete_t complete_fn, void *context) { - struct urb *urb; - void *mem; - int i; + int i = 0; - for (i = 0; i < num; i++) { - urb = usb_alloc_urb(0, gfp_flags); + for (; i < num; i++) { + void *mem; + struct urb *urb = usb_alloc_urb(0, gfp_flags); if (urb == NULL) return i; mem = usb_alloc_coherent(udev, buf_size, gfp_flags, &urb->transfer_dma); - if (mem == NULL) + if (mem == NULL) { + usb_free_urb(urb); return i; + } usb_fill_bulk_urb(urb, udev, usb_rcvbulkpipe(udev, ep_addr), mem, buf_size, complete_fn, context); -- cgit v1.2.3-70-g09d2 From a3bc5e3304c9ba8e7504597026d9ca93784d1239 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 3 Jan 2011 10:49:34 -0300 Subject: [media] v4l/cx18: update workqueue usage With cmwq, there's no reason to use separate out_work_queue. Drop it and use system_wq instead. The in_work_queue needs to be ordered so can't use one of the system wqs; however, as it isn't used to reclaim memory, allocate the workqueue with alloc_ordered_workqueue() without WQ_MEM_RECLAIM. Signed-off-by: Tejun Heo Reviewed-by: Andy Walls Acked-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-driver.c | 24 ++---------------------- drivers/media/video/cx18/cx18-driver.h | 3 --- drivers/media/video/cx18/cx18-streams.h | 3 +-- 3 files changed, 3 insertions(+), 27 deletions(-) diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 133ec2bac18..944af8adbe0 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -664,7 +664,7 @@ static int __devinit cx18_create_in_workq(struct cx18 *cx) { snprintf(cx->in_workq_name, sizeof(cx->in_workq_name), "%s-in", cx->v4l2_dev.name); - cx->in_work_queue = create_singlethread_workqueue(cx->in_workq_name); + cx->in_work_queue = alloc_ordered_workqueue(cx->in_workq_name, 0); if (cx->in_work_queue == NULL) { CX18_ERR("Unable to create incoming mailbox handler thread\n"); return -ENOMEM; @@ -672,18 +672,6 @@ static int __devinit cx18_create_in_workq(struct cx18 *cx) return 0; } -static int __devinit cx18_create_out_workq(struct cx18 *cx) -{ - snprintf(cx->out_workq_name, sizeof(cx->out_workq_name), "%s-out", - cx->v4l2_dev.name); - cx->out_work_queue = create_workqueue(cx->out_workq_name); - if (cx->out_work_queue == NULL) { - CX18_ERR("Unable to create outgoing mailbox handler threads\n"); - return -ENOMEM; - } - return 0; -} - static void __devinit cx18_init_in_work_orders(struct cx18 *cx) { int i; @@ -710,15 +698,9 @@ static int __devinit cx18_init_struct1(struct cx18 *cx) mutex_init(&cx->epu2apu_mb_lock); mutex_init(&cx->epu2cpu_mb_lock); - ret = cx18_create_out_workq(cx); - if (ret) - return ret; - ret = cx18_create_in_workq(cx); - if (ret) { - destroy_workqueue(cx->out_work_queue); + if (ret) return ret; - } cx18_init_in_work_orders(cx); @@ -1107,7 +1089,6 @@ free_mem: release_mem_region(cx->base_addr, CX18_MEM_SIZE); free_workqueues: destroy_workqueue(cx->in_work_queue); - destroy_workqueue(cx->out_work_queue); err: if (retval == 0) retval = -ENODEV; @@ -1259,7 +1240,6 @@ static void cx18_remove(struct pci_dev *pci_dev) cx18_halt_firmware(cx); destroy_workqueue(cx->in_work_queue); - destroy_workqueue(cx->out_work_queue); cx18_streams_cleanup(cx, 1); diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index f6f3e50d4bd..306caac6d3f 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -617,9 +617,6 @@ struct cx18 { struct cx18_in_work_order in_work_order[CX18_MAX_IN_WORK_ORDERS]; char epu_debug_str[256]; /* CX18_EPU_DEBUG is rare: use shared space */ - struct workqueue_struct *out_work_queue; - char out_workq_name[12]; /* "cx18-NN-out" */ - /* i2c */ struct i2c_adapter i2c_adap[2]; struct i2c_algo_bit_data i2c_algo[2]; diff --git a/drivers/media/video/cx18/cx18-streams.h b/drivers/media/video/cx18/cx18-streams.h index 51765eb12d3..713b0e61536 100644 --- a/drivers/media/video/cx18/cx18-streams.h +++ b/drivers/media/video/cx18/cx18-streams.h @@ -42,8 +42,7 @@ static inline bool cx18_stream_enabled(struct cx18_stream *s) /* Related to submission of mdls to firmware */ static inline void cx18_stream_load_fw_queue(struct cx18_stream *s) { - struct cx18 *cx = s->cx; - queue_work(cx->out_work_queue, &s->out_work_order); + schedule_work(&s->out_work_order); } static inline void cx18_stream_put_mdl_fw(struct cx18_stream *s, -- cgit v1.2.3-70-g09d2 From 34b8fc8e683cbcbbe47806260ef5dc505915b45f Mon Sep 17 00:00:00 2001 From: Matti Aaltonen Date: Tue, 4 Jan 2011 08:29:37 -0300 Subject: [media] V4L2: WL1273 FM Radio: Replace ioctl with unlocked_ioctl Use unlocked_ioctl in v4l2_file_operations. The locking is already in place. Signed-off-by: Matti J. Aaltonen Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-wl1273.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c index dd6bd364efa..7ecc8e65766 100644 --- a/drivers/media/radio/radio-wl1273.c +++ b/drivers/media/radio/radio-wl1273.c @@ -1407,7 +1407,7 @@ static const struct v4l2_file_operations wl1273_fops = { .read = wl1273_fm_fops_read, .write = wl1273_fm_fops_write, .poll = wl1273_fm_fops_poll, - .ioctl = video_ioctl2, + .unlocked_ioctl = video_ioctl2, .open = wl1273_fm_fops_open, .release = wl1273_fm_fops_release, }; -- cgit v1.2.3-70-g09d2 From e95342f168f7a02441cec51b222bb7ae62df364d Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Thu, 6 Jan 2011 14:25:44 -0300 Subject: [media] DVB: cx231xx drivers does not use dummy frontend anymore Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx231xx/cx231xx-dvb.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/cx231xx/cx231xx-dvb.c b/drivers/media/video/cx231xx/cx231xx-dvb.c index fe59a1c3f06..363aa600422 100644 --- a/drivers/media/video/cx231xx/cx231xx-dvb.c +++ b/drivers/media/video/cx231xx/cx231xx-dvb.c @@ -28,7 +28,6 @@ #include #include "xc5000.h" -#include "dvb_dummy_fe.h" #include "s5h1432.h" #include "tda18271.h" #include "s5h1411.h" @@ -619,7 +618,7 @@ static int dvb_init(struct cx231xx *dev) if (dev->dvb->frontend == NULL) { printk(DRIVER_NAME - ": Failed to attach dummy front end\n"); + ": Failed to attach s5h1411 front end\n"); result = -EINVAL; goto out_free; } @@ -665,7 +664,7 @@ static int dvb_init(struct cx231xx *dev) if (dev->dvb->frontend == NULL) { printk(DRIVER_NAME - ": Failed to attach dummy front end\n"); + ": Failed to attach s5h1411 front end\n"); result = -EINVAL; goto out_free; } -- cgit v1.2.3-70-g09d2 From 7d2edfc23e9852591cb031a26093cdcd07a34a90 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 6 Jan 2011 16:57:14 -0300 Subject: [media] rc/imon: fix ffdc device detection oops There's a nasty bug that slipped in when the rc device interface was altered, only affecting the older 0xffdc imon devices. We were trying to access ictx->rdev->allowed_protos before ictx->rdev had been set. There's also an issue with call ordering that meant the correct keymap wasn't getting loaded for MCE IR type 0xffdc devices. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/imon.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 6811512b4e8..a30bd99c5ca 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -1756,7 +1756,6 @@ static void imon_get_ffdc_type(struct imon_context *ictx) printk(KERN_CONT " (id 0x%02x)\n", ffdc_cfg_byte); ictx->display_type = detected_display_type; - ictx->rdev->allowed_protos = allowed_protos; ictx->rc_type = allowed_protos; } @@ -1839,10 +1838,6 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx) rdev->allowed_protos = RC_TYPE_OTHER | RC_TYPE_RC6; /* iMON PAD or MCE */ rdev->change_protocol = imon_ir_change_protocol; rdev->driver_name = MOD_NAME; - if (ictx->rc_type == RC_TYPE_RC6) - rdev->map_name = RC_MAP_IMON_MCE; - else - rdev->map_name = RC_MAP_IMON_PAD; /* Enable front-panel buttons and/or knobs */ memcpy(ictx->usb_tx_buf, &fp_packet, sizeof(fp_packet)); @@ -1851,11 +1846,18 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx) if (ret) dev_info(ictx->dev, "panel buttons/knobs setup failed\n"); - if (ictx->product == 0xffdc) + if (ictx->product == 0xffdc) { imon_get_ffdc_type(ictx); + rdev->allowed_protos = ictx->rc_type; + } imon_set_display_type(ictx); + if (ictx->rc_type == RC_TYPE_RC6) + rdev->map_name = RC_MAP_IMON_MCE; + else + rdev->map_name = RC_MAP_IMON_PAD; + ret = rc_register_device(rdev); if (ret < 0) { dev_err(ictx->dev, "remote input dev register failed\n"); -- cgit v1.2.3-70-g09d2 From 2e4c55626a0c30b5b2bc9469c025a563a81c3785 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Thu, 6 Jan 2011 16:59:33 -0300 Subject: [media] rc/ene_ir: fix oops on module load dev->rdev is accessed in ene_setup_hw_settings, so it needs to be wired up before then. [Jarod Wilson]: Also fix a possible improper resource freeing bug while we're looking at possible probe issues here. Signed-off-by: Kyle McMartin CC: Maxim Levitsky Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/ene_ir.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c index 80b3c319f69..885abdddfaa 100644 --- a/drivers/media/rc/ene_ir.c +++ b/drivers/media/rc/ene_ir.c @@ -1004,6 +1004,10 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id) /* validate resources */ error = -ENODEV; + /* init these to -1, as 0 is valid for both */ + dev->hw_io = -1; + dev->irq = -1; + if (!pnp_port_valid(pnp_dev, 0) || pnp_port_len(pnp_dev, 0) < ENE_IO_SIZE) goto error; @@ -1072,6 +1076,8 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id) rdev->input_name = "ENE eHome Infrared Remote Transceiver"; } + dev->rdev = rdev; + ene_rx_setup_hw_buffer(dev); ene_setup_default_settings(dev); ene_setup_hw_settings(dev); @@ -1083,7 +1089,6 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id) if (error < 0) goto error; - dev->rdev = rdev; ene_notice("driver has been succesfully loaded"); return 0; error: -- cgit v1.2.3-70-g09d2 From 9ad77eb57b45f81ac3e12077d19e5f121c4cff6d Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 6 Jan 2011 16:59:34 -0300 Subject: [media] rc/imon: need to submit urb before ffdc type check Otherwise, we have a null receive buffer, and the logic all falls down, goes boom, all ffdc devs wind up as imon IR w/VFD. Oops. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/imon.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index a30bd99c5ca..70342074924 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -2110,18 +2110,6 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf) goto find_endpoint_failed; } - ictx->idev = imon_init_idev(ictx); - if (!ictx->idev) { - dev_err(dev, "%s: input device setup failed\n", __func__); - goto idev_setup_failed; - } - - ictx->rdev = imon_init_rdev(ictx); - if (!ictx->rdev) { - dev_err(dev, "%s: rc device setup failed\n", __func__); - goto rdev_setup_failed; - } - usb_fill_int_urb(ictx->rx_urb_intf0, ictx->usbdev_intf0, usb_rcvintpipe(ictx->usbdev_intf0, ictx->rx_endpoint_intf0->bEndpointAddress), @@ -2135,13 +2123,25 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf) goto urb_submit_failed; } + ictx->idev = imon_init_idev(ictx); + if (!ictx->idev) { + dev_err(dev, "%s: input device setup failed\n", __func__); + goto idev_setup_failed; + } + + ictx->rdev = imon_init_rdev(ictx); + if (!ictx->rdev) { + dev_err(dev, "%s: rc device setup failed\n", __func__); + goto rdev_setup_failed; + } + return ictx; -urb_submit_failed: - rc_unregister_device(ictx->rdev); rdev_setup_failed: input_unregister_device(ictx->idev); idev_setup_failed: + usb_kill_urb(ictx->rx_urb_intf0); +urb_submit_failed: find_endpoint_failed: mutex_unlock(&ictx->lock); usb_free_urb(tx_urb); -- cgit v1.2.3-70-g09d2 From 5aad724280b9f8ffff3a55311ef0ba35ebb4099a Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 6 Jan 2011 16:59:36 -0300 Subject: [media] rc: fix up and genericize some time unit conversions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ene_ir driver was using a private define of MS_TO_NS, which is meant to be microseconds to nanoseconds. The mceusb driver copied it, intending to use is a milliseconds to microseconds. Lets move the defines to a common location, expand and standardize them a touch, so that we now have: MS_TO_NS - milliseconds to nanoseconds MS_TO_US - milliseconds to microseconds US_TO_NS - microseconds to nanoseconds Reported-by: David Härdeman CC: Maxim Levitsky Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/ene_ir.c | 16 ++++++++-------- drivers/media/rc/ene_ir.h | 2 -- drivers/media/rc/mceusb.c | 7 +++---- include/media/rc-core.h | 3 +++ 4 files changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c index 885abdddfaa..1ac49139158 100644 --- a/drivers/media/rc/ene_ir.c +++ b/drivers/media/rc/ene_ir.c @@ -446,27 +446,27 @@ static void ene_rx_setup(struct ene_device *dev) select_timeout: if (dev->rx_fan_input_inuse) { - dev->rdev->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN); + dev->rdev->rx_resolution = US_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN); /* Fan input doesn't support timeouts, it just ends the input with a maximum sample */ dev->rdev->min_timeout = dev->rdev->max_timeout = - MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK * + US_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK * ENE_FW_SAMPLE_PERIOD_FAN); } else { - dev->rdev->rx_resolution = MS_TO_NS(sample_period); + dev->rdev->rx_resolution = US_TO_NS(sample_period); /* Theoreticly timeout is unlimited, but we cap it * because it was seen that on one device, it * would stop sending spaces after around 250 msec. * Besides, this is close to 2^32 anyway and timeout is u32. */ - dev->rdev->min_timeout = MS_TO_NS(127 * sample_period); - dev->rdev->max_timeout = MS_TO_NS(200000); + dev->rdev->min_timeout = US_TO_NS(127 * sample_period); + dev->rdev->max_timeout = US_TO_NS(200000); } if (dev->hw_learning_and_tx_capable) - dev->rdev->tx_resolution = MS_TO_NS(sample_period); + dev->rdev->tx_resolution = US_TO_NS(sample_period); if (dev->rdev->timeout > dev->rdev->max_timeout) dev->rdev->timeout = dev->rdev->max_timeout; @@ -801,7 +801,7 @@ static irqreturn_t ene_isr(int irq, void *data) dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space"); - ev.duration = MS_TO_NS(hw_sample); + ev.duration = US_TO_NS(hw_sample); ev.pulse = pulse; ir_raw_event_store_with_filter(dev->rdev, &ev); } @@ -821,7 +821,7 @@ static void ene_setup_default_settings(struct ene_device *dev) dev->learning_mode_enabled = learning_mode_force; /* Set reasonable default timeout */ - dev->rdev->timeout = MS_TO_NS(150000); + dev->rdev->timeout = US_TO_NS(150000); } /* Upload all hardware settings at once. Used at load and resume time */ diff --git a/drivers/media/rc/ene_ir.h b/drivers/media/rc/ene_ir.h index c179baf34cb..337a41d4450 100644 --- a/drivers/media/rc/ene_ir.h +++ b/drivers/media/rc/ene_ir.h @@ -201,8 +201,6 @@ #define dbg_verbose(format, ...) __dbg(2, format, ## __VA_ARGS__) #define dbg_regs(format, ...) __dbg(3, format, ## __VA_ARGS__) -#define MS_TO_NS(msec) ((msec) * 1000) - struct ene_device { struct pnp_dev *pnp_dev; struct rc_dev *rdev; diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 0fef6efad53..2d9113493cf 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -48,7 +48,6 @@ #define USB_BUFLEN 32 /* USB reception buffer length */ #define USB_CTRL_MSG_SZ 2 /* Size of usb ctrl msg on gen1 hw */ #define MCE_G1_INIT_MSGS 40 /* Init messages on gen1 hw to throw out */ -#define MS_TO_NS(msec) ((msec) * 1000) /* MCE constants */ #define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */ @@ -817,7 +816,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index) switch (ir->buf_in[index]) { /* 2-byte return value commands */ case MCE_CMD_S_TIMEOUT: - ir->rc->timeout = MS_TO_NS((hi << 8 | lo) / 2); + ir->rc->timeout = MS_TO_US((hi << 8 | lo) / 2); break; /* 1-byte return value commands */ @@ -858,7 +857,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) ir->rem--; rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0); rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK) - * MS_TO_NS(MCE_TIME_UNIT); + * MS_TO_US(MCE_TIME_UNIT); dev_dbg(ir->dev, "Storing %s with duration %d\n", rawir.pulse ? "pulse" : "space", @@ -1061,7 +1060,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir) rc->priv = ir; rc->driver_type = RC_DRIVER_IR_RAW; rc->allowed_protos = RC_TYPE_ALL; - rc->timeout = MS_TO_NS(1000); + rc->timeout = MS_TO_US(1000); if (!ir->flags.no_tx) { rc->s_tx_mask = mceusb_set_tx_mask; rc->s_tx_carrier = mceusb_set_tx_carrier; diff --git a/include/media/rc-core.h b/include/media/rc-core.h index a23c1fc685a..2963263f31e 100644 --- a/include/media/rc-core.h +++ b/include/media/rc-core.h @@ -183,6 +183,9 @@ static inline void init_ir_raw_event(struct ir_raw_event *ev) } #define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */ +#define US_TO_NS(usec) ((usec) * 1000) +#define MS_TO_US(msec) ((msec) * 1000) +#define MS_TO_NS(msec) ((msec) * 1000 * 1000) void ir_raw_event_handle(struct rc_dev *dev); int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev); -- cgit v1.2.3-70-g09d2 From 76f1ef427c0aab3d3c917b497562ea2cdaaae056 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 6 Jan 2011 16:59:35 -0300 Subject: [media] rc/imon: default to key mode instead of mouse mode My initial thinking was that we should default to mouse mode, so people could use the mouse function to click on something on a login screen, but a lot of systems where a remote is useful automatically log in a user and launch a media center application, some of which hide the mouse, which can be confusing to users if they punch buttons on the remote and don't see any feedback. Plus, first and foremost, its a remote, so lets default to being a remote, and only toggle into mouse mode when the user explicitly asks for it. As a nice side-effect, this actually simplifies some of the code a fair bit... Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/imon.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 70342074924..e7dc6b46fdf 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -988,7 +988,6 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type) int retval; struct imon_context *ictx = rc->priv; struct device *dev = ictx->dev; - bool pad_mouse; unsigned char ir_proto_packet[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 }; @@ -1000,29 +999,20 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type) case RC_TYPE_RC6: dev_dbg(dev, "Configuring IR receiver for MCE protocol\n"); ir_proto_packet[0] = 0x01; - pad_mouse = false; break; case RC_TYPE_UNKNOWN: case RC_TYPE_OTHER: dev_dbg(dev, "Configuring IR receiver for iMON protocol\n"); - if (pad_stabilize && !nomouse) - pad_mouse = true; - else { + if (!pad_stabilize) dev_dbg(dev, "PAD stabilize functionality disabled\n"); - pad_mouse = false; - } /* ir_proto_packet[0] = 0x00; // already the default */ rc_type = RC_TYPE_OTHER; break; default: dev_warn(dev, "Unsupported IR protocol specified, overriding " "to iMON IR protocol\n"); - if (pad_stabilize && !nomouse) - pad_mouse = true; - else { + if (!pad_stabilize) dev_dbg(dev, "PAD stabilize functionality disabled\n"); - pad_mouse = false; - } /* ir_proto_packet[0] = 0x00; // already the default */ rc_type = RC_TYPE_OTHER; break; @@ -1035,7 +1025,7 @@ static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type) goto out; ictx->rc_type = rc_type; - ictx->pad_mouse = pad_mouse; + ictx->pad_mouse = false; out: return retval; @@ -1517,7 +1507,7 @@ static void imon_incoming_packet(struct imon_context *ictx, spin_unlock_irqrestore(&ictx->kc_lock, flags); return; } else { - ictx->pad_mouse = 0; + ictx->pad_mouse = false; dev_dbg(dev, "mouse mode disabled, passing key value\n"); } } -- cgit v1.2.3-70-g09d2 From cb26a24ee9706473f31d34cc259f4dcf45cd0644 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 7 Jan 2011 16:41:54 -0300 Subject: [media] [v3,media] av7110: check for negative array offset info->num comes from the user. It's type int. If the user passes in a negative value that would cause memory corruption. Signed-off-by: Dan Carpenter Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/ttpci/av7110_ca.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c index 122c7280691..9fc1dd0ba4c 100644 --- a/drivers/media/dvb/ttpci/av7110_ca.c +++ b/drivers/media/dvb/ttpci/av7110_ca.c @@ -277,7 +277,7 @@ static int dvb_ca_ioctl(struct file *file, unsigned int cmd, void *parg) { ca_slot_info_t *info=(ca_slot_info_t *)parg; - if (info->num > 1) + if (info->num < 0 || info->num > 1) return -EINVAL; av7110->ci_slot[info->num].num = info->num; av7110->ci_slot[info->num].type = FW_CI_LL_SUPPORT(av7110->arm_app) ? -- cgit v1.2.3-70-g09d2 From b7eccc46a1dae153d0102c161b4ce4bddb3f52ba Mon Sep 17 00:00:00 2001 From: Christian Gmeiner Date: Sat, 8 Jan 2011 18:45:35 -0300 Subject: [media] adv7175: support s_power This patch adds s_power support to adv7175 driver. Power-down is done by power-down all four DACs. Signed-off-by: Christian Gmeiner Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/adv7175.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c index f318b51448b..d2327dbb473 100644 --- a/drivers/media/video/adv7175.c +++ b/drivers/media/video/adv7175.c @@ -303,11 +303,22 @@ static int adv7175_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ide return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7175, 0); } +static int adv7175_s_power(struct v4l2_subdev *sd, int on) +{ + if (on) + adv7175_write(sd, 0x01, 0x00); + else + adv7175_write(sd, 0x01, 0x78); + + return 0; +} + /* ----------------------------------------------------------------------- */ static const struct v4l2_subdev_core_ops adv7175_core_ops = { .g_chip_ident = adv7175_g_chip_ident, .init = adv7175_init, + .s_power = adv7175_s_power, }; static const struct v4l2_subdev_video_ops adv7175_video_ops = { -- cgit v1.2.3-70-g09d2 From 2dbd61b4651f0bdc6cd5f75a983844b5f3831e17 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 9 Jan 2011 00:53:53 -0300 Subject: [media] ir-raw: fix sparse non-ANSI function warning Fix sparse warning for non-ANSI function declaration: drivers/media/rc/ir-raw.c:247:30: warning: non-ANSI function declaration of function 'ir_raw_get_allowed_protocols' Signed-off-by: Randy Dunlap Cc: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/ir-raw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c index 185baddcbf1..73230ff93b8 100644 --- a/drivers/media/rc/ir-raw.c +++ b/drivers/media/rc/ir-raw.c @@ -233,7 +233,7 @@ EXPORT_SYMBOL_GPL(ir_raw_event_handle); /* used internally by the sysfs interface */ u64 -ir_raw_get_allowed_protocols() +ir_raw_get_allowed_protocols(void) { u64 protocols; mutex_lock(&ir_raw_handler_lock); -- cgit v1.2.3-70-g09d2 From 2400982a2e8a8e4e95f0a0e1517bbe63cc88038f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 16 Jan 2011 10:09:13 -0300 Subject: [media] radio-aimslab.c needs #include MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit e3c92215198cb6aa00ad38db2780faa6b72e0a3f ("[media] radio-aimslab.c: Fix gcc 4.5+ bug") removed the include, but introduced new callers of msleep(): | drivers/media/radio/radio-aimslab.c: In function ‘rt_decvol’: | drivers/media/radio/radio-aimslab.c:76: error: implicit declaration of function ‘msleep’ Signed-off-by: Geert Uytterhoeven Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-aimslab.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c index 6cc5d130fbc..4ce10dbeadd 100644 --- a/drivers/media/radio/radio-aimslab.c +++ b/drivers/media/radio/radio-aimslab.c @@ -31,6 +31,7 @@ #include /* Modules */ #include /* Initdata */ #include /* request_region */ +#include /* msleep */ #include /* kernel radio structs */ #include /* for KERNEL_VERSION MACRO */ #include /* outb, outb_p */ -- cgit v1.2.3-70-g09d2 From 3c61be446ae5c26e2829d37c6b5d02d3af536024 Mon Sep 17 00:00:00 2001 From: Dmitri Belimov Date: Thu, 13 Jan 2011 00:46:07 -0300 Subject: [media] tm6000: rework init code Rework device init part. Move common code part to a function. Usefull for register multiple devices like video, radio, vbi etc. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/tm6000/tm6000-video.c | 46 +++++++++++++++++++++++++++-------- 1 file changed, 36 insertions(+), 10 deletions(-) diff --git a/drivers/staging/tm6000/tm6000-video.c b/drivers/staging/tm6000/tm6000-video.c index 8fe017c3721..eb9b9f1bc13 100644 --- a/drivers/staging/tm6000/tm6000-video.c +++ b/drivers/staging/tm6000/tm6000-video.c @@ -1450,29 +1450,55 @@ static struct video_device tm6000_template = { * ------------------------------------------------------------------ */ -int tm6000_v4l2_register(struct tm6000_core *dev) +static struct video_device *vdev_init(struct tm6000_core *dev, + const struct video_device + *template, const char *type_name) { - int ret = -1; struct video_device *vfd; vfd = video_device_alloc(); - if(!vfd) { + if (NULL == vfd) + return NULL; + + *vfd = *template; + vfd->v4l2_dev = &dev->v4l2_dev; + vfd->release = video_device_release; + vfd->debug = tm6000_debug; + vfd->lock = &dev->lock; + + snprintf(vfd->name, sizeof(vfd->name), "%s %s", dev->name, type_name); + + video_set_drvdata(vfd, dev); + return vfd; +} + +int tm6000_v4l2_register(struct tm6000_core *dev) +{ + int ret = -1; + + dev->vfd = vdev_init(dev, &tm6000_template, "video"); + + if (!dev->vfd) { + printk(KERN_INFO "%s: can't register video device\n", + dev->name); return -ENOMEM; } - dev->vfd = vfd; /* init video dma queues */ INIT_LIST_HEAD(&dev->vidq.active); INIT_LIST_HEAD(&dev->vidq.queued); - memcpy(dev->vfd, &tm6000_template, sizeof(*(dev->vfd))); - dev->vfd->debug = tm6000_debug; - dev->vfd->lock = &dev->lock; + ret = video_register_device(dev->vfd, VFL_TYPE_GRABBER, video_nr); - vfd->v4l2_dev = &dev->v4l2_dev; - video_set_drvdata(vfd, dev); + if (ret < 0) { + printk(KERN_INFO "%s: can't register video device\n", + dev->name); + return ret; + } + + printk(KERN_INFO "%s: registered device %s\n", + dev->name, video_device_node_name(dev->vfd)); - ret = video_register_device(dev->vfd, VFL_TYPE_GRABBER, video_nr); printk(KERN_INFO "Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: %d)\n", ret); return ret; } -- cgit v1.2.3-70-g09d2 From 22f37712f29868b393025aa28bee807b4d2783ea Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 16 Jan 2011 05:39:21 -0300 Subject: [media] firedtv: fix remote control with newer Xorg evdev After a recent update of xf86-input-evdev and xorg-server, I noticed that X11 applications did not receive keypresses from the FireDTV infrared remote control anymore. Instead, the Xorg log featured lots of "FireDTV remote control: dropping event due to full queue!" exclamations. The Linux console did not have an issue with the FireDTV's RC though. The fix is to insert EV_SYN events after the key-down/-up events. Signed-off-by: Stefan Richter Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/firewire/firedtv-rc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/firewire/firedtv-rc.c b/drivers/media/dvb/firewire/firedtv-rc.c index fcf3828472b..f82d4a93feb 100644 --- a/drivers/media/dvb/firewire/firedtv-rc.c +++ b/drivers/media/dvb/firewire/firedtv-rc.c @@ -172,7 +172,8 @@ void fdtv_unregister_rc(struct firedtv *fdtv) void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code) { - u16 *keycode = fdtv->remote_ctrl_dev->keycode; + struct input_dev *idev = fdtv->remote_ctrl_dev; + u16 *keycode = idev->keycode; if (code >= 0x0300 && code <= 0x031f) code = keycode[code - 0x0300]; @@ -188,6 +189,8 @@ void fdtv_handle_rc(struct firedtv *fdtv, unsigned int code) return; } - input_report_key(fdtv->remote_ctrl_dev, code, 1); - input_report_key(fdtv->remote_ctrl_dev, code, 0); + input_report_key(idev, code, 1); + input_sync(idev); + input_report_key(idev, code, 0); + input_sync(idev); } -- cgit v1.2.3-70-g09d2 From 86e52428eed0507a11ba03c5de731c763bd88480 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Wed, 12 Jan 2011 22:50:10 -0300 Subject: [media] lirc_zilog: Reword debug message in ir_probe() Jean Delvare suggested this better format for debug output in ir_probe(). Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index ad29bb1275a..bf81e3fddf8 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -1195,9 +1195,8 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) int ret; int have_rx = 0, have_tx = 0; - dprintk("%s: adapter name (%s) nr %d, i2c_device_id name (%s), " - "client addr=0x%02x\n", - __func__, adap->name, adap->nr, id->name, client->addr); + dprintk("%s: %s on i2c-%d (%s), client addr=0x%02x\n", + __func__, id->name, adap->nr, adap->name, client->addr); /* * FIXME - This probe function probes both the Tx and Rx -- cgit v1.2.3-70-g09d2 From 02fcaaa3a52b2bdad8a08a3ee5747f27f27df27d Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Wed, 12 Jan 2011 23:31:25 -0300 Subject: [media] lirc_zilog: Remove disable_tx module parameter The only reason to use the lirc_zilog module is for IR Tx, so remove the possibility of disabling IR Tx. If the user needs only IR Rx, then the ir-kbd-i2c module works just fine, and doesn't require a "firmware" image. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index bf81e3fddf8..91125336144 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -131,7 +131,6 @@ static struct mutex tx_data_lock; /* module parameters */ static int debug; /* debug output */ static int disable_rx; /* disable RX device */ -static int disable_tx; /* disable TX device */ static int minor = -1; /* minor number */ #define dprintk(fmt, args...) \ @@ -1218,12 +1217,10 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) */ client->addr = 0x70; - if (!disable_tx) { - if (i2c_master_recv(client, &buf, 1) == 1) - have_tx = 1; - dprintk("probe 0x70 @ %s: %s\n", - adap->name, have_tx ? "success" : "failed"); - } + if (i2c_master_recv(client, &buf, 1) == 1) + have_tx = 1; + dprintk("probe 0x70 @ %s: %s\n", + adap->name, have_tx ? "success" : "failed"); if (!disable_rx) { client->addr = 0x71; @@ -1398,6 +1395,3 @@ MODULE_PARM_DESC(debug, "Enable debugging messages"); module_param(disable_rx, bool, 0644); MODULE_PARM_DESC(disable_rx, "Disable the IR receiver device"); - -module_param(disable_tx, bool, 0644); -MODULE_PARM_DESC(disable_tx, "Disable the IR transmitter device"); -- cgit v1.2.3-70-g09d2 From 06da95a3ec831dee23f6af58934944a8eb9c3a56 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Thu, 13 Jan 2011 02:00:33 -0300 Subject: [media] lirc_zilog: Split struct IR into structs IR, IR_tx, and IR_rx This change is a mostly mechanical break of the main struct IR data structure into common, Rx, and Tx structures. There were some small logical changes required as well, such as eliminating "is_hdpvr", to accomplish this. This change is an intiial step in reworking lirc_zilog to decouple the Rx and Tx handling as much as possible to fit with the new I2C binding model. This change actually makes lirc_zilog a little more broken than it already was - memory deallocation in particular got worse. However, this change makes the remaining problems easier to see and address. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 298 ++++++++++++++++++++++---------------- 1 file changed, 171 insertions(+), 127 deletions(-) diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index 91125336144..85e312f3351 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -60,17 +60,9 @@ #include #include -struct IR { - struct lirc_driver l; - - /* Device info */ - struct mutex ir_lock; - int open; - bool is_hdpvr; - +struct IR_rx { /* RX device */ struct i2c_client c_rx; - int have_rx; /* RX device buffer & lock */ struct lirc_buffer buf; @@ -84,11 +76,26 @@ struct IR { /* RX read data */ unsigned char b[3]; + bool hdpvr_data_fmt; +}; +struct IR_tx { /* TX device */ struct i2c_client c_tx; + + /* TX additional actions needed */ int need_boot; - int have_tx; + bool post_tx_ready_poll; +}; + +struct IR { + struct lirc_driver l; + + struct mutex ir_lock; + int open; + + struct IR_rx *rx; + struct IR_tx *tx; }; /* Minor -> data mapping */ @@ -149,8 +156,12 @@ static int add_to_buf(struct IR *ir) int ret; int failures = 0; unsigned char sendbuf[1] = { 0 }; + struct IR_rx *rx = ir->rx; - if (lirc_buffer_full(&ir->buf)) { + if (rx == NULL) + return -ENXIO; + + if (lirc_buffer_full(&rx->buf)) { dprintk("buffer overflow\n"); return -EOVERFLOW; } @@ -170,7 +181,7 @@ static int add_to_buf(struct IR *ir) * Send random "poll command" (?) Windows driver does this * and it is a good point to detect chip failure. */ - ret = i2c_master_send(&ir->c_rx, sendbuf, 1); + ret = i2c_master_send(&rx->c_rx, sendbuf, 1); if (ret != 1) { zilog_error("i2c_master_send failed with %d\n", ret); if (failures >= 3) { @@ -186,44 +197,45 @@ static int add_to_buf(struct IR *ir) set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout((100 * HZ + 999) / 1000); - ir->need_boot = 1; + if (ir->tx != NULL) + ir->tx->need_boot = 1; ++failures; mutex_unlock(&ir->ir_lock); continue; } - ret = i2c_master_recv(&ir->c_rx, keybuf, sizeof(keybuf)); + ret = i2c_master_recv(&rx->c_rx, keybuf, sizeof(keybuf)); mutex_unlock(&ir->ir_lock); if (ret != sizeof(keybuf)) { zilog_error("i2c_master_recv failed with %d -- " "keeping last read buffer\n", ret); } else { - ir->b[0] = keybuf[3]; - ir->b[1] = keybuf[4]; - ir->b[2] = keybuf[5]; - dprintk("key (0x%02x/0x%02x)\n", ir->b[0], ir->b[1]); + rx->b[0] = keybuf[3]; + rx->b[1] = keybuf[4]; + rx->b[2] = keybuf[5]; + dprintk("key (0x%02x/0x%02x)\n", rx->b[0], rx->b[1]); } /* key pressed ? */ - if (ir->is_hdpvr) { + if (rx->hdpvr_data_fmt) { if (got_data && (keybuf[0] == 0x80)) return 0; else if (got_data && (keybuf[0] == 0x00)) return -ENODATA; - } else if ((ir->b[0] & 0x80) == 0) + } else if ((rx->b[0] & 0x80) == 0) return got_data ? 0 : -ENODATA; /* look what we have */ - code = (((__u16)ir->b[0] & 0x7f) << 6) | (ir->b[1] >> 2); + code = (((__u16)rx->b[0] & 0x7f) << 6) | (rx->b[1] >> 2); codes[0] = (code >> 8) & 0xff; codes[1] = code & 0xff; /* return it */ - lirc_buffer_write(&ir->buf, codes); + lirc_buffer_write(&rx->buf, codes); ++got_data; - } while (!lirc_buffer_full(&ir->buf)); + } while (!lirc_buffer_full(&rx->buf)); return 0; } @@ -241,9 +253,13 @@ static int add_to_buf(struct IR *ir) static int lirc_thread(void *arg) { struct IR *ir = arg; + struct IR_rx *rx = ir->rx; + + if (rx == NULL) + return -ENXIO; - if (ir->t_notify != NULL) - complete(ir->t_notify); + if (rx->t_notify != NULL) + complete(rx->t_notify); dprintk("poll thread started\n"); @@ -264,23 +280,23 @@ static int lirc_thread(void *arg) * lost keypresses. */ schedule_timeout((260 * HZ) / 1000); - if (ir->shutdown) + if (rx->shutdown) break; if (!add_to_buf(ir)) - wake_up_interruptible(&ir->buf.wait_poll); + wake_up_interruptible(&rx->buf.wait_poll); } else { /* if device not opened so we can sleep half a second */ set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(HZ/2); } - } while (!ir->shutdown); + } while (!rx->shutdown); - if (ir->t_notify2 != NULL) - wait_for_completion(ir->t_notify2); + if (rx->t_notify2 != NULL) + wait_for_completion(rx->t_notify2); - ir->task = NULL; - if (ir->t_notify != NULL) - complete(ir->t_notify); + rx->task = NULL; + if (rx->t_notify != NULL) + complete(rx->t_notify); dprintk("poll thread ended\n"); return 0; @@ -298,10 +314,10 @@ static int set_use_inc(void *data) * this is completely broken code. lirc_unregister_driver() * must be possible even when the device is open */ - if (ir->c_rx.addr) - i2c_use_client(&ir->c_rx); - if (ir->c_tx.addr) - i2c_use_client(&ir->c_tx); + if (ir->rx != NULL) + i2c_use_client(&ir->rx->c_rx); + if (ir->tx != NULL) + i2c_use_client(&ir->tx->c_tx); return 0; } @@ -310,10 +326,10 @@ static void set_use_dec(void *data) { struct IR *ir = data; - if (ir->c_rx.addr) - i2c_release_client(&ir->c_rx); - if (ir->c_tx.addr) - i2c_release_client(&ir->c_tx); + if (ir->rx) + i2c_release_client(&ir->rx->c_rx); + if (ir->tx) + i2c_release_client(&ir->tx->c_tx); if (ir->l.owner != NULL) module_put(ir->l.owner); } @@ -452,7 +468,7 @@ corrupt: } /* send a block of data to the IR TX device */ -static int send_data_block(struct IR *ir, unsigned char *data_block) +static int send_data_block(struct IR_tx *tx, unsigned char *data_block) { int i, j, ret; unsigned char buf[5]; @@ -466,7 +482,7 @@ static int send_data_block(struct IR *ir, unsigned char *data_block) buf[1 + j] = data_block[i + j]; dprintk("%02x %02x %02x %02x %02x", buf[0], buf[1], buf[2], buf[3], buf[4]); - ret = i2c_master_send(&ir->c_tx, buf, tosend + 1); + ret = i2c_master_send(&tx->c_tx, buf, tosend + 1); if (ret != tosend + 1) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; @@ -477,32 +493,32 @@ static int send_data_block(struct IR *ir, unsigned char *data_block) } /* send boot data to the IR TX device */ -static int send_boot_data(struct IR *ir) +static int send_boot_data(struct IR_tx *tx) { int ret; unsigned char buf[4]; /* send the boot block */ - ret = send_data_block(ir, tx_data->boot_data); + ret = send_data_block(tx, tx_data->boot_data); if (ret != 0) return ret; /* kick it off? */ buf[0] = 0x00; buf[1] = 0x20; - ret = i2c_master_send(&ir->c_tx, buf, 2); + ret = i2c_master_send(&tx->c_tx, buf, 2); if (ret != 2) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } - ret = i2c_master_send(&ir->c_tx, buf, 1); + ret = i2c_master_send(&tx->c_tx, buf, 1); if (ret != 1) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } /* Here comes the firmware version... (hopefully) */ - ret = i2c_master_recv(&ir->c_tx, buf, 4); + ret = i2c_master_recv(&tx->c_tx, buf, 4); if (ret != 4) { zilog_error("i2c_master_recv failed with %d\n", ret); return 0; @@ -542,7 +558,7 @@ static void fw_unload(void) } /* load "firmware" for the IR TX device */ -static int fw_load(struct IR *ir) +static int fw_load(struct IR_tx *tx) { int ret; unsigned int i; @@ -557,7 +573,7 @@ static int fw_load(struct IR *ir) } /* Request codeset data file */ - ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", &ir->c_tx.dev); + ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", &tx->c_tx.dev); if (ret != 0) { zilog_error("firmware haup-ir-blaster.bin not available " "(%d)\n", ret); @@ -684,20 +700,20 @@ out: } /* initialise the IR TX device */ -static int tx_init(struct IR *ir) +static int tx_init(struct IR_tx *tx) { int ret; /* Load 'firmware' */ - ret = fw_load(ir); + ret = fw_load(tx); if (ret != 0) return ret; /* Send boot block */ - ret = send_boot_data(ir); + ret = send_boot_data(tx); if (ret != 0) return ret; - ir->need_boot = 0; + tx->need_boot = 0; /* Looks good */ return 0; @@ -713,20 +729,20 @@ static loff_t lseek(struct file *filep, loff_t offset, int orig) static ssize_t read(struct file *filep, char *outbuf, size_t n, loff_t *ppos) { struct IR *ir = filep->private_data; - unsigned char buf[ir->buf.chunk_size]; + struct IR_rx *rx = ir->rx; int ret = 0, written = 0; DECLARE_WAITQUEUE(wait, current); dprintk("read called\n"); - if (ir->c_rx.addr == 0) + if (rx == NULL) return -ENODEV; - if (mutex_lock_interruptible(&ir->buf_lock)) + if (mutex_lock_interruptible(&rx->buf_lock)) return -ERESTARTSYS; - if (n % ir->buf.chunk_size) { + if (n % rx->buf.chunk_size) { dprintk("read result = -EINVAL\n"); - mutex_unlock(&ir->buf_lock); + mutex_unlock(&rx->buf_lock); return -EINVAL; } @@ -735,7 +751,7 @@ static ssize_t read(struct file *filep, char *outbuf, size_t n, loff_t *ppos) * to avoid losing scan code (in case when queue is awaken somewhere * between while condition checking and scheduling) */ - add_wait_queue(&ir->buf.wait_poll, &wait); + add_wait_queue(&rx->buf.wait_poll, &wait); set_current_state(TASK_INTERRUPTIBLE); /* @@ -743,7 +759,7 @@ static ssize_t read(struct file *filep, char *outbuf, size_t n, loff_t *ppos) * mode and 'copy_to_user' is happy, wait for data. */ while (written < n && ret == 0) { - if (lirc_buffer_empty(&ir->buf)) { + if (lirc_buffer_empty(&rx->buf)) { /* * According to the read(2) man page, 'written' can be * returned as less than 'n', instead of blocking @@ -763,16 +779,17 @@ static ssize_t read(struct file *filep, char *outbuf, size_t n, loff_t *ppos) schedule(); set_current_state(TASK_INTERRUPTIBLE); } else { - lirc_buffer_read(&ir->buf, buf); + unsigned char buf[rx->buf.chunk_size]; + lirc_buffer_read(&rx->buf, buf); ret = copy_to_user((void *)outbuf+written, buf, - ir->buf.chunk_size); - written += ir->buf.chunk_size; + rx->buf.chunk_size); + written += rx->buf.chunk_size; } } - remove_wait_queue(&ir->buf.wait_poll, &wait); + remove_wait_queue(&rx->buf.wait_poll, &wait); set_current_state(TASK_RUNNING); - mutex_unlock(&ir->buf_lock); + mutex_unlock(&rx->buf_lock); dprintk("read result = %s (%d)\n", ret ? "-EFAULT" : "OK", ret); @@ -781,7 +798,7 @@ static ssize_t read(struct file *filep, char *outbuf, size_t n, loff_t *ppos) } /* send a keypress to the IR TX device */ -static int send_code(struct IR *ir, unsigned int code, unsigned int key) +static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key) { unsigned char data_block[TX_BLOCK_SIZE]; unsigned char buf[2]; @@ -798,26 +815,26 @@ static int send_code(struct IR *ir, unsigned int code, unsigned int key) return ret; /* Send the data block */ - ret = send_data_block(ir, data_block); + ret = send_data_block(tx, data_block); if (ret != 0) return ret; /* Send data block length? */ buf[0] = 0x00; buf[1] = 0x40; - ret = i2c_master_send(&ir->c_tx, buf, 2); + ret = i2c_master_send(&tx->c_tx, buf, 2); if (ret != 2) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } - ret = i2c_master_send(&ir->c_tx, buf, 1); + ret = i2c_master_send(&tx->c_tx, buf, 1); if (ret != 1) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } /* Send finished download? */ - ret = i2c_master_recv(&ir->c_tx, buf, 1); + ret = i2c_master_recv(&tx->c_tx, buf, 1); if (ret != 1) { zilog_error("i2c_master_recv failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; @@ -831,7 +848,7 @@ static int send_code(struct IR *ir, unsigned int code, unsigned int key) /* Send prepare command? */ buf[0] = 0x00; buf[1] = 0x80; - ret = i2c_master_send(&ir->c_tx, buf, 2); + ret = i2c_master_send(&tx->c_tx, buf, 2); if (ret != 2) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; @@ -842,7 +859,7 @@ static int send_code(struct IR *ir, unsigned int code, unsigned int key) * last i2c_master_recv always fails with a -5, so for now, we're * going to skip this whole mess and say we're done on the HD PVR */ - if (ir->is_hdpvr) { + if (!tx->post_tx_ready_poll) { dprintk("sent code %u, key %u\n", code, key); return 0; } @@ -856,7 +873,7 @@ static int send_code(struct IR *ir, unsigned int code, unsigned int key) for (i = 0; i < 20; ++i) { set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout((50 * HZ + 999) / 1000); - ret = i2c_master_send(&ir->c_tx, buf, 1); + ret = i2c_master_send(&tx->c_tx, buf, 1); if (ret == 1) break; dprintk("NAK expected: i2c_master_send " @@ -869,7 +886,7 @@ static int send_code(struct IR *ir, unsigned int code, unsigned int key) } /* Seems to be an 'ok' response */ - i = i2c_master_recv(&ir->c_tx, buf, 1); + i = i2c_master_recv(&tx->c_tx, buf, 1); if (i != 1) { zilog_error("i2c_master_recv failed with %d\n", ret); return -EFAULT; @@ -894,10 +911,11 @@ static ssize_t write(struct file *filep, const char *buf, size_t n, loff_t *ppos) { struct IR *ir = filep->private_data; + struct IR_tx *tx = ir->tx; size_t i; int failures = 0; - if (ir->c_tx.addr == 0) + if (tx == NULL) return -ENODEV; /* Validate user parameters */ @@ -918,15 +936,15 @@ static ssize_t write(struct file *filep, const char *buf, size_t n, } /* Send boot data first if required */ - if (ir->need_boot == 1) { - ret = send_boot_data(ir); + if (tx->need_boot == 1) { + ret = send_boot_data(tx); if (ret == 0) - ir->need_boot = 0; + tx->need_boot = 0; } /* Send the code */ if (ret == 0) { - ret = send_code(ir, (unsigned)command >> 16, + ret = send_code(tx, (unsigned)command >> 16, (unsigned)command & 0xFFFF); if (ret == -EPROTO) { mutex_unlock(&ir->ir_lock); @@ -951,7 +969,7 @@ static ssize_t write(struct file *filep, const char *buf, size_t n, } set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout((100 * HZ + 999) / 1000); - ir->need_boot = 1; + tx->need_boot = 1; ++failures; } else i += sizeof(int); @@ -968,22 +986,23 @@ static ssize_t write(struct file *filep, const char *buf, size_t n, static unsigned int poll(struct file *filep, poll_table *wait) { struct IR *ir = filep->private_data; + struct IR_rx *rx = ir->rx; unsigned int ret; dprintk("poll called\n"); - if (ir->c_rx.addr == 0) + if (rx == NULL) return -ENODEV; - mutex_lock(&ir->buf_lock); + mutex_lock(&rx->buf_lock); - poll_wait(filep, &ir->buf.wait_poll, wait); + poll_wait(filep, &rx->buf.wait_poll, wait); dprintk("poll result = %s\n", - lirc_buffer_empty(&ir->buf) ? "0" : "POLLIN|POLLRDNORM"); + lirc_buffer_empty(&rx->buf) ? "0" : "POLLIN|POLLRDNORM"); - ret = lirc_buffer_empty(&ir->buf) ? 0 : (POLLIN|POLLRDNORM); + ret = lirc_buffer_empty(&rx->buf) ? 0 : (POLLIN|POLLRDNORM); - mutex_unlock(&ir->buf_lock); + mutex_unlock(&rx->buf_lock); return ret; } @@ -993,9 +1012,9 @@ static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg) int result; unsigned long mode, features = 0; - if (ir->c_rx.addr != 0) + if (ir->rx != NULL) features |= LIRC_CAN_REC_LIRCCODE; - if (ir->c_tx.addr != 0) + if (ir->tx != NULL) features |= LIRC_CAN_SEND_PULSE; switch (cmd) { @@ -1146,23 +1165,26 @@ static const struct file_operations lirc_fops = { static int ir_remove(struct i2c_client *client) { struct IR *ir = i2c_get_clientdata(client); + struct IR_rx *rx = ir->rx; + struct IR_tx *tx = ir->tx; + /* FIXME make tx, rx senitive */ mutex_lock(&ir->ir_lock); - if (ir->have_rx || ir->have_tx) { + if (rx != NULL || tx != NULL) { DECLARE_COMPLETION(tn); DECLARE_COMPLETION(tn2); /* end up polling thread */ - if (ir->task && !IS_ERR(ir->task)) { - ir->t_notify = &tn; - ir->t_notify2 = &tn2; - ir->shutdown = 1; - wake_up_process(ir->task); + if (rx->task && !IS_ERR(rx->task)) { + rx->t_notify = &tn; + rx->t_notify2 = &tn2; + rx->shutdown = 1; + wake_up_process(rx->task); complete(&tn2); wait_for_completion(&tn); - ir->t_notify = NULL; - ir->t_notify2 = NULL; + rx->t_notify = NULL; + rx->t_notify2 = NULL; } } else { @@ -1173,13 +1195,15 @@ static int ir_remove(struct i2c_client *client) } /* unregister lirc driver */ + /* FIXME make tx, rx senitive */ if (ir->l.minor >= 0 && ir->l.minor < MAX_IRCTL_DEVICES) { lirc_unregister_driver(ir->l.minor); ir_devices[ir->l.minor] = NULL; } /* free memory */ - lirc_buffer_free(&ir->buf); + /* FIXME make tx, rx senitive */ + lirc_buffer_free(&rx->buf); mutex_unlock(&ir->ir_lock); kfree(ir); @@ -1240,18 +1264,37 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) have_rx ? "RX only" : "TX only"); ir = kzalloc(sizeof(struct IR), GFP_KERNEL); - if (!ir) goto out_nomem; - ret = lirc_buffer_init(&ir->buf, 2, BUFLEN / 2); - if (ret) - goto out_nomem; + if (have_tx) { + ir->tx = kzalloc(sizeof(struct IR_tx), GFP_KERNEL); + if (ir->tx != NULL) { + ir->tx->need_boot = 1; + ir->tx->post_tx_ready_poll = + (id->driver_data & ID_FLAG_HDPVR) ? false : true; + } + } + + if (have_rx) { + ir->rx = kzalloc(sizeof(struct IR_rx), GFP_KERNEL); + + if (ir->rx == NULL) { + ret = -ENOMEM; + } else { + ir->rx->hdpvr_data_fmt = + (id->driver_data & ID_FLAG_HDPVR) ? true : false; + mutex_init(&ir->rx->buf_lock); + ret = lirc_buffer_init(&ir->rx->buf, 2, BUFLEN / 2); + } + + if (ret && (ir->rx != NULL)) { + kfree(ir->rx); + ir->rx = NULL; + } + } mutex_init(&ir->ir_lock); - mutex_init(&ir->buf_lock); - ir->need_boot = 1; - ir->is_hdpvr = (id->driver_data & ID_FLAG_HDPVR) ? true : false; memcpy(&ir->l, &lirc_template, sizeof(struct lirc_driver)); ir->l.minor = -1; @@ -1260,40 +1303,38 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) i2c_set_clientdata(client, ir); /* initialise RX device */ - if (have_rx) { + if (ir->rx != NULL) { DECLARE_COMPLETION(tn); - memcpy(&ir->c_rx, client, sizeof(struct i2c_client)); + memcpy(&ir->rx->c_rx, client, sizeof(struct i2c_client)); - ir->c_rx.addr = 0x71; - strlcpy(ir->c_rx.name, ZILOG_HAUPPAUGE_IR_RX_NAME, + ir->rx->c_rx.addr = 0x71; + strlcpy(ir->rx->c_rx.name, ZILOG_HAUPPAUGE_IR_RX_NAME, I2C_NAME_SIZE); /* try to fire up polling thread */ - ir->t_notify = &tn; - ir->task = kthread_run(lirc_thread, ir, "lirc_zilog"); - if (IS_ERR(ir->task)) { - ret = PTR_ERR(ir->task); + ir->rx->t_notify = &tn; + ir->rx->task = kthread_run(lirc_thread, ir, "lirc_zilog"); + if (IS_ERR(ir->rx->task)) { + ret = PTR_ERR(ir->rx->task); zilog_error("lirc_register_driver: cannot run " "poll thread %d\n", ret); goto err; } wait_for_completion(&tn); - ir->t_notify = NULL; - ir->have_rx = 1; + ir->rx->t_notify = NULL; } /* initialise TX device */ - if (have_tx) { - memcpy(&ir->c_tx, client, sizeof(struct i2c_client)); - ir->c_tx.addr = 0x70; - strlcpy(ir->c_tx.name, ZILOG_HAUPPAUGE_IR_TX_NAME, + if (ir->tx) { + memcpy(&ir->tx->c_tx, client, sizeof(struct i2c_client)); + ir->tx->c_tx.addr = 0x70; + strlcpy(ir->tx->c_tx.name, ZILOG_HAUPPAUGE_IR_TX_NAME, I2C_NAME_SIZE); - ir->have_tx = 1; } /* set lirc_dev stuff */ ir->l.code_length = 13; - ir->l.rbuf = &ir->buf; + ir->l.rbuf = (ir->rx == NULL) ? NULL : &ir->rx->buf; ir->l.fops = &lirc_fops; ir->l.data = ir; ir->l.minor = minor; @@ -1317,9 +1358,9 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) * after registering with lirc as otherwise hotplug seems to take * 10s to create the lirc device. */ - if (have_tx) { + if (ir->tx != NULL) { /* Special TX init */ - ret = tx_init(ir); + ret = tx_init(ir->tx); if (ret != 0) goto err; } @@ -1327,18 +1368,21 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) return 0; err: + /* FIXME - memory deallocation for all error cases needs work */ /* undo everything, hopefully... */ - if (ir->c_rx.addr) - ir_remove(&ir->c_rx); - if (ir->c_tx.addr) - ir_remove(&ir->c_tx); + if (ir->rx != NULL) + ir_remove(&ir->rx->c_rx); + if (ir->tx != NULL) + ir_remove(&ir->tx->c_tx); return ret; out_nodev: + /* FIXME - memory deallocation for all error cases needs work */ zilog_error("no device found\n"); return -ENODEV; out_nomem: + /* FIXME - memory deallocation for all error cases needs work */ zilog_error("memory allocation failure\n"); kfree(ir); return -ENOMEM; -- cgit v1.2.3-70-g09d2 From e9b351f64f5c02acf6552d2109bc213bfa133388 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Fri, 14 Jan 2011 21:11:22 -0300 Subject: [media] lirc_zilog: Don't make private copies of i2c clients Don't make private copies of the i2c clients provided by the I2C subsystem, don't change the client address field, and don't probe the client addresses - the bridge driver already did that. This moves us to the proper I2C and binding model. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 87 +++++++++++++-------------------------- 1 file changed, 28 insertions(+), 59 deletions(-) diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index 85e312f3351..00f2e7d3b3e 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -62,7 +62,7 @@ struct IR_rx { /* RX device */ - struct i2c_client c_rx; + struct i2c_client *c; /* RX device buffer & lock */ struct lirc_buffer buf; @@ -81,7 +81,7 @@ struct IR_rx { struct IR_tx { /* TX device */ - struct i2c_client c_tx; + struct i2c_client *c; /* TX additional actions needed */ int need_boot; @@ -132,9 +132,6 @@ static struct mutex tx_data_lock; ## args) #define zilog_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args) -#define ZILOG_HAUPPAUGE_IR_RX_NAME "Zilog/Hauppauge IR RX" -#define ZILOG_HAUPPAUGE_IR_TX_NAME "Zilog/Hauppauge IR TX" - /* module parameters */ static int debug; /* debug output */ static int disable_rx; /* disable RX device */ @@ -181,7 +178,7 @@ static int add_to_buf(struct IR *ir) * Send random "poll command" (?) Windows driver does this * and it is a good point to detect chip failure. */ - ret = i2c_master_send(&rx->c_rx, sendbuf, 1); + ret = i2c_master_send(rx->c, sendbuf, 1); if (ret != 1) { zilog_error("i2c_master_send failed with %d\n", ret); if (failures >= 3) { @@ -205,7 +202,7 @@ static int add_to_buf(struct IR *ir) continue; } - ret = i2c_master_recv(&rx->c_rx, keybuf, sizeof(keybuf)); + ret = i2c_master_recv(rx->c, keybuf, sizeof(keybuf)); mutex_unlock(&ir->ir_lock); if (ret != sizeof(keybuf)) { zilog_error("i2c_master_recv failed with %d -- " @@ -315,9 +312,9 @@ static int set_use_inc(void *data) * must be possible even when the device is open */ if (ir->rx != NULL) - i2c_use_client(&ir->rx->c_rx); + i2c_use_client(ir->rx->c); if (ir->tx != NULL) - i2c_use_client(&ir->tx->c_tx); + i2c_use_client(ir->tx->c); return 0; } @@ -327,9 +324,9 @@ static void set_use_dec(void *data) struct IR *ir = data; if (ir->rx) - i2c_release_client(&ir->rx->c_rx); + i2c_release_client(ir->rx->c); if (ir->tx) - i2c_release_client(&ir->tx->c_tx); + i2c_release_client(ir->tx->c); if (ir->l.owner != NULL) module_put(ir->l.owner); } @@ -482,7 +479,7 @@ static int send_data_block(struct IR_tx *tx, unsigned char *data_block) buf[1 + j] = data_block[i + j]; dprintk("%02x %02x %02x %02x %02x", buf[0], buf[1], buf[2], buf[3], buf[4]); - ret = i2c_master_send(&tx->c_tx, buf, tosend + 1); + ret = i2c_master_send(tx->c, buf, tosend + 1); if (ret != tosend + 1) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; @@ -506,19 +503,19 @@ static int send_boot_data(struct IR_tx *tx) /* kick it off? */ buf[0] = 0x00; buf[1] = 0x20; - ret = i2c_master_send(&tx->c_tx, buf, 2); + ret = i2c_master_send(tx->c, buf, 2); if (ret != 2) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } - ret = i2c_master_send(&tx->c_tx, buf, 1); + ret = i2c_master_send(tx->c, buf, 1); if (ret != 1) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } /* Here comes the firmware version... (hopefully) */ - ret = i2c_master_recv(&tx->c_tx, buf, 4); + ret = i2c_master_recv(tx->c, buf, 4); if (ret != 4) { zilog_error("i2c_master_recv failed with %d\n", ret); return 0; @@ -573,7 +570,7 @@ static int fw_load(struct IR_tx *tx) } /* Request codeset data file */ - ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", &tx->c_tx.dev); + ret = request_firmware(&fw_entry, "haup-ir-blaster.bin", &tx->c->dev); if (ret != 0) { zilog_error("firmware haup-ir-blaster.bin not available " "(%d)\n", ret); @@ -822,19 +819,19 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key) /* Send data block length? */ buf[0] = 0x00; buf[1] = 0x40; - ret = i2c_master_send(&tx->c_tx, buf, 2); + ret = i2c_master_send(tx->c, buf, 2); if (ret != 2) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } - ret = i2c_master_send(&tx->c_tx, buf, 1); + ret = i2c_master_send(tx->c, buf, 1); if (ret != 1) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; } /* Send finished download? */ - ret = i2c_master_recv(&tx->c_tx, buf, 1); + ret = i2c_master_recv(tx->c, buf, 1); if (ret != 1) { zilog_error("i2c_master_recv failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; @@ -848,7 +845,7 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key) /* Send prepare command? */ buf[0] = 0x00; buf[1] = 0x80; - ret = i2c_master_send(&tx->c_tx, buf, 2); + ret = i2c_master_send(tx->c, buf, 2); if (ret != 2) { zilog_error("i2c_master_send failed with %d\n", ret); return ret < 0 ? ret : -EFAULT; @@ -873,7 +870,7 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key) for (i = 0; i < 20; ++i) { set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout((50 * HZ + 999) / 1000); - ret = i2c_master_send(&tx->c_tx, buf, 1); + ret = i2c_master_send(tx->c, buf, 1); if (ret == 1) break; dprintk("NAK expected: i2c_master_send " @@ -886,7 +883,7 @@ static int send_code(struct IR_tx *tx, unsigned int code, unsigned int key) } /* Seems to be an 'ok' response */ - i = i2c_master_recv(&tx->c_tx, buf, 1); + i = i2c_master_recv(tx->c, buf, 1); if (i != 1) { zilog_error("i2c_master_recv failed with %d\n", ret); return -EFAULT; @@ -1214,7 +1211,6 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct IR *ir = NULL; struct i2c_adapter *adap = client->adapter; - char buf; int ret; int have_rx = 0, have_tx = 0; @@ -1239,24 +1235,13 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) * The external IR receiver is at i2c address 0x71. * The IR transmitter is at 0x70. */ - client->addr = 0x70; - if (i2c_master_recv(client, &buf, 1) == 1) + if (id->driver_data & ID_FLAG_TX) { have_tx = 1; - dprintk("probe 0x70 @ %s: %s\n", - adap->name, have_tx ? "success" : "failed"); - - if (!disable_rx) { - client->addr = 0x71; - if (i2c_master_recv(client, &buf, 1) == 1) - have_rx = 1; - dprintk("probe 0x71 @ %s: %s\n", - adap->name, have_rx ? "success" : "failed"); - } - - if (!(have_rx || have_tx)) { - zilog_error("%s: no devices found\n", adap->name); - goto out_nodev; + } else if (!disable_rx) { + have_rx = 1; + } else { + return -ENXIO; } printk(KERN_INFO "lirc_zilog: chip found with %s\n", @@ -1270,6 +1255,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) if (have_tx) { ir->tx = kzalloc(sizeof(struct IR_tx), GFP_KERNEL); if (ir->tx != NULL) { + ir->tx->c = client; ir->tx->need_boot = 1; ir->tx->post_tx_ready_poll = (id->driver_data & ID_FLAG_HDPVR) ? false : true; @@ -1282,6 +1268,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) if (ir->rx == NULL) { ret = -ENOMEM; } else { + ir->rx->c = client; ir->rx->hdpvr_data_fmt = (id->driver_data & ID_FLAG_HDPVR) ? true : false; mutex_init(&ir->rx->buf_lock); @@ -1305,11 +1292,6 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) /* initialise RX device */ if (ir->rx != NULL) { DECLARE_COMPLETION(tn); - memcpy(&ir->rx->c_rx, client, sizeof(struct i2c_client)); - - ir->rx->c_rx.addr = 0x71; - strlcpy(ir->rx->c_rx.name, ZILOG_HAUPPAUGE_IR_RX_NAME, - I2C_NAME_SIZE); /* try to fire up polling thread */ ir->rx->t_notify = &tn; @@ -1324,14 +1306,6 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) ir->rx->t_notify = NULL; } - /* initialise TX device */ - if (ir->tx) { - memcpy(&ir->tx->c_tx, client, sizeof(struct i2c_client)); - ir->tx->c_tx.addr = 0x70; - strlcpy(ir->tx->c_tx.name, ZILOG_HAUPPAUGE_IR_TX_NAME, - I2C_NAME_SIZE); - } - /* set lirc_dev stuff */ ir->l.code_length = 13; ir->l.rbuf = (ir->rx == NULL) ? NULL : &ir->rx->buf; @@ -1371,16 +1345,11 @@ err: /* FIXME - memory deallocation for all error cases needs work */ /* undo everything, hopefully... */ if (ir->rx != NULL) - ir_remove(&ir->rx->c_rx); + ir_remove(ir->rx->c); if (ir->tx != NULL) - ir_remove(&ir->tx->c_tx); + ir_remove(ir->tx->c); return ret; -out_nodev: - /* FIXME - memory deallocation for all error cases needs work */ - zilog_error("no device found\n"); - return -ENODEV; - out_nomem: /* FIXME - memory deallocation for all error cases needs work */ zilog_error("memory allocation failure\n"); -- cgit v1.2.3-70-g09d2 From a68a9b73fbb05144a71b573f262fbc8ed8f71179 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 15 Jan 2011 01:04:06 -0300 Subject: [media] lirc_zilog: Extensive rework of ir_probe()/ir_remove() This patch is an extensive rework of the ir_probe() and ir_remove() functions. It removes all the double binding and allocation problems on module load. It removes almost all the memory leaks on module exit and on device instantiation failure. Proper destruction of the Rx polling kthread still needs investigation and more work, but it is no worse than it already was. This rework also had side effects that include: - encapsulation of the ir_devices[] array - serialization of access to the ir_devices[] array - semantic change of the module parameter "disable_rx" to "tx_only" If tx_only is true, the module does not claim the i2c_client for the IR Rx function, and only claims and handles the i2c_client for the IR Tx function. This is a first step in providing the option of letting ir-kbd-i2c.c handle IR Rx function, while lirc_zilog handles the IR Tx function. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 344 +++++++++++++++++++++++--------------- 1 file changed, 212 insertions(+), 132 deletions(-) diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index 00f2e7d3b3e..f2e8c63fa5b 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -94,11 +94,13 @@ struct IR { struct mutex ir_lock; int open; + struct i2c_adapter *adapter; struct IR_rx *rx; struct IR_tx *tx; }; /* Minor -> data mapping */ +static struct mutex ir_devices_lock; static struct IR *ir_devices[MAX_IRCTL_DEVICES]; /* Block size for IR transmitter */ @@ -131,10 +133,11 @@ static struct mutex tx_data_lock; #define zilog_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, \ ## args) #define zilog_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args) +#define zilog_info(s, args...) printk(KERN_INFO KBUILD_MODNAME ": " s, ## args) /* module parameters */ static int debug; /* debug output */ -static int disable_rx; /* disable RX device */ +static int tx_only; /* only handle the IR Tx function */ static int minor = -1; /* minor number */ #define dprintk(fmt, args...) \ @@ -252,9 +255,6 @@ static int lirc_thread(void *arg) struct IR *ir = arg; struct IR_rx *rx = ir->rx; - if (rx == NULL) - return -ENXIO; - if (rx->t_notify != NULL) complete(rx->t_notify); @@ -296,6 +296,7 @@ static int lirc_thread(void *arg) complete(rx->t_notify); dprintk("poll thread ended\n"); + /* FIXME - investigate if this is the proper way to shutdown a kthread*/ return 0; } @@ -1058,6 +1059,15 @@ static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg) return result; } +/* ir_devices_lock must be held */ +static struct IR *find_ir_device_by_minor(unsigned int minor) +{ + if (minor >= MAX_IRCTL_DEVICES) + return NULL; + + return ir_devices[minor]; +} + /* * Open the IR device. Get hold of our IR structure and * stash it in private_data for the file @@ -1066,15 +1076,15 @@ static int open(struct inode *node, struct file *filep) { struct IR *ir; int ret; + unsigned int minor = MINOR(node->i_rdev); /* find our IR struct */ - unsigned minor = MINOR(node->i_rdev); - if (minor >= MAX_IRCTL_DEVICES) { - dprintk("minor %d: open result = -ENODEV\n", - minor); + mutex_lock(&ir_devices_lock); + ir = find_ir_device_by_minor(minor); + mutex_unlock(&ir_devices_lock); + + if (ir == NULL) return -ENODEV; - } - ir = ir_devices[minor]; /* increment in use count */ mutex_lock(&ir->ir_lock); @@ -1159,136 +1169,203 @@ static const struct file_operations lirc_fops = { .release = close }; -static int ir_remove(struct i2c_client *client) +/* FIXME - investigate if this is the proper way to shutdown a kthread */ +static void destroy_rx_kthread(struct IR_rx *rx) { - struct IR *ir = i2c_get_clientdata(client); - struct IR_rx *rx = ir->rx; - struct IR_tx *tx = ir->tx; + DECLARE_COMPLETION(tn); + DECLARE_COMPLETION(tn2); - /* FIXME make tx, rx senitive */ - mutex_lock(&ir->ir_lock); + if (rx == NULL) + return; + + /* end up polling thread */ + if (rx->task && !IS_ERR(rx->task)) { + rx->t_notify = &tn; + rx->t_notify2 = &tn2; + rx->shutdown = 1; + wake_up_process(rx->task); + complete(&tn2); + wait_for_completion(&tn); + rx->t_notify = NULL; + rx->t_notify2 = NULL; + } +} - if (rx != NULL || tx != NULL) { - DECLARE_COMPLETION(tn); - DECLARE_COMPLETION(tn2); - - /* end up polling thread */ - if (rx->task && !IS_ERR(rx->task)) { - rx->t_notify = &tn; - rx->t_notify2 = &tn2; - rx->shutdown = 1; - wake_up_process(rx->task); - complete(&tn2); - wait_for_completion(&tn); - rx->t_notify = NULL; - rx->t_notify2 = NULL; +/* ir_devices_lock must be held */ +static int add_ir_device(struct IR *ir) +{ + int i; + + for (i = 0; i < MAX_IRCTL_DEVICES; i++) + if (ir_devices[i] == NULL) { + ir_devices[i] = ir; + break; } - } else { - mutex_unlock(&ir->ir_lock); - zilog_error("%s: detached from something we didn't " - "attach to\n", __func__); - return -ENODEV; + return i == MAX_IRCTL_DEVICES ? -ENOMEM : i; +} + +/* ir_devices_lock must be held */ +static void del_ir_device(struct IR *ir) +{ + int i; + + for (i = 0; i < MAX_IRCTL_DEVICES; i++) + if (ir_devices[i] == ir) { + ir_devices[i] = NULL; + break; + } +} + +static int ir_remove(struct i2c_client *client) +{ + struct IR *ir = i2c_get_clientdata(client); + + mutex_lock(&ir_devices_lock); + + if (ir == NULL) { + /* We destroyed everything when the first client came through */ + mutex_unlock(&ir_devices_lock); + return 0; } - /* unregister lirc driver */ - /* FIXME make tx, rx senitive */ - if (ir->l.minor >= 0 && ir->l.minor < MAX_IRCTL_DEVICES) { - lirc_unregister_driver(ir->l.minor); - ir_devices[ir->l.minor] = NULL; + /* Good-bye LIRC */ + lirc_unregister_driver(ir->l.minor); + + /* Good-bye Rx */ + destroy_rx_kthread(ir->rx); + if (ir->rx != NULL) { + if (ir->rx->buf.fifo_initialized) + lirc_buffer_free(&ir->rx->buf); + i2c_set_clientdata(ir->rx->c, NULL); + kfree(ir->rx); } - /* free memory */ - /* FIXME make tx, rx senitive */ - lirc_buffer_free(&rx->buf); - mutex_unlock(&ir->ir_lock); + /* Good-bye Tx */ + i2c_set_clientdata(ir->tx->c, NULL); + kfree(ir->tx); + + /* Good-bye IR */ + del_ir_device(ir); kfree(ir); + mutex_unlock(&ir_devices_lock); return 0; } -static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) + +/* ir_devices_lock must be held */ +static struct IR *find_ir_device_by_adapter(struct i2c_adapter *adapter) { + int i; struct IR *ir = NULL; + + for (i = 0; i < MAX_IRCTL_DEVICES; i++) + if (ir_devices[i] != NULL && + ir_devices[i]->adapter == adapter) { + ir = ir_devices[i]; + break; + } + + return ir; +} + +static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct IR *ir; struct i2c_adapter *adap = client->adapter; int ret; - int have_rx = 0, have_tx = 0; + bool tx_probe = false; dprintk("%s: %s on i2c-%d (%s), client addr=0x%02x\n", __func__, id->name, adap->nr, adap->name, client->addr); /* - * FIXME - This probe function probes both the Tx and Rx - * addresses of the IR microcontroller. - * - * However, the I2C subsystem is passing along one I2C client at a - * time, based on matches to the ir_transceiver_id[] table above. - * The expectation is that each i2c_client address will be probed - * individually by drivers so the I2C subsystem can mark all client - * addresses as claimed or not. - * - * This probe routine causes only one of the client addresses, TX or RX, - * to be claimed. This will cause a problem if the I2C subsystem is - * subsequently triggered to probe unclaimed clients again. - */ - /* - * The external IR receiver is at i2c address 0x71. - * The IR transmitter is at 0x70. + * The IR receiver is at i2c address 0x71. + * The IR transmitter is at i2c address 0x70. */ - if (id->driver_data & ID_FLAG_TX) { - have_tx = 1; - } else if (!disable_rx) { - have_rx = 1; - } else { + if (id->driver_data & ID_FLAG_TX) + tx_probe = true; + else if (tx_only) /* module option */ return -ENXIO; - } - printk(KERN_INFO "lirc_zilog: chip found with %s\n", - have_rx && have_tx ? "RX and TX" : - have_rx ? "RX only" : "TX only"); + zilog_info("%s: probing IR %s on %s (i2c-%d)\n", + __func__, tx_probe ? "Tx" : "Rx", adap->name, adap->nr); - ir = kzalloc(sizeof(struct IR), GFP_KERNEL); - if (!ir) - goto out_nomem; + mutex_lock(&ir_devices_lock); - if (have_tx) { - ir->tx = kzalloc(sizeof(struct IR_tx), GFP_KERNEL); - if (ir->tx != NULL) { - ir->tx->c = client; - ir->tx->need_boot = 1; - ir->tx->post_tx_ready_poll = - (id->driver_data & ID_FLAG_HDPVR) ? false : true; + /* Use a single struct IR instance for both the Rx and Tx functions */ + ir = find_ir_device_by_adapter(adap); + if (ir == NULL) { + ir = kzalloc(sizeof(struct IR), GFP_KERNEL); + if (ir == NULL) { + ret = -ENOMEM; + goto out_no_ir; } + /* store for use in ir_probe() again, and open() later on */ + ret = add_ir_device(ir); + if (ret) + goto out_free_ir; + + ir->adapter = adap; + mutex_init(&ir->ir_lock); + + /* set lirc_dev stuff */ + memcpy(&ir->l, &lirc_template, sizeof(struct lirc_driver)); + ir->l.minor = minor; /* module option */ + ir->l.code_length = 13; + ir->l.rbuf = NULL; + ir->l.fops = &lirc_fops; + ir->l.data = ir; + ir->l.dev = &adap->dev; + ir->l.sample_rate = 0; } - if (have_rx) { - ir->rx = kzalloc(sizeof(struct IR_rx), GFP_KERNEL); + if (tx_probe) { + /* Set up a struct IR_tx instance */ + ir->tx = kzalloc(sizeof(struct IR_tx), GFP_KERNEL); + if (ir->tx == NULL) { + ret = -ENOMEM; + goto out_free_xx; + } + ir->tx->c = client; + ir->tx->need_boot = 1; + ir->tx->post_tx_ready_poll = + (id->driver_data & ID_FLAG_HDPVR) ? false : true; + } else { + /* Set up a struct IR_rx instance */ + ir->rx = kzalloc(sizeof(struct IR_rx), GFP_KERNEL); if (ir->rx == NULL) { ret = -ENOMEM; - } else { - ir->rx->c = client; - ir->rx->hdpvr_data_fmt = - (id->driver_data & ID_FLAG_HDPVR) ? true : false; - mutex_init(&ir->rx->buf_lock); - ret = lirc_buffer_init(&ir->rx->buf, 2, BUFLEN / 2); + goto out_free_xx; } - if (ret && (ir->rx != NULL)) { - kfree(ir->rx); - ir->rx = NULL; - } - } + ret = lirc_buffer_init(&ir->rx->buf, 2, BUFLEN / 2); + if (ret) + goto out_free_xx; - mutex_init(&ir->ir_lock); + mutex_init(&ir->rx->buf_lock); + ir->rx->c = client; + ir->rx->hdpvr_data_fmt = + (id->driver_data & ID_FLAG_HDPVR) ? true : false; - memcpy(&ir->l, &lirc_template, sizeof(struct lirc_driver)); - ir->l.minor = -1; + /* set lirc_dev stuff */ + ir->l.rbuf = &ir->rx->buf; + } - /* I2C attach to device */ i2c_set_clientdata(client, ir); + /* Proceed only if we have the required Tx and Rx clients ready to go */ + if (ir->tx == NULL || + (ir->rx == NULL && !tx_only)) { + zilog_info("%s: probe of IR %s on %s (i2c-%d) done, waiting on " + "IR %s\n", __func__, tx_probe ? "Tx" : "Rx", + adap->name, adap->nr, tx_probe ? "Rx" : "Tx"); + goto out_ok; + } + /* initialise RX device */ if (ir->rx != NULL) { DECLARE_COMPLETION(tn); @@ -1298,35 +1375,23 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) ir->rx->task = kthread_run(lirc_thread, ir, "lirc_zilog"); if (IS_ERR(ir->rx->task)) { ret = PTR_ERR(ir->rx->task); - zilog_error("lirc_register_driver: cannot run " - "poll thread %d\n", ret); - goto err; + zilog_error("%s: could not start IR Rx polling thread" + "\n", __func__); + goto out_free_xx; } wait_for_completion(&tn); ir->rx->t_notify = NULL; } - /* set lirc_dev stuff */ - ir->l.code_length = 13; - ir->l.rbuf = (ir->rx == NULL) ? NULL : &ir->rx->buf; - ir->l.fops = &lirc_fops; - ir->l.data = ir; - ir->l.minor = minor; - ir->l.dev = &adap->dev; - ir->l.sample_rate = 0; - /* register with lirc */ ir->l.minor = lirc_register_driver(&ir->l); if (ir->l.minor < 0 || ir->l.minor >= MAX_IRCTL_DEVICES) { - zilog_error("ir_attach: \"minor\" must be between 0 and %d " - "(%d)!\n", MAX_IRCTL_DEVICES-1, ir->l.minor); + zilog_error("%s: \"minor\" must be between 0 and %d (%d)!\n", + __func__, MAX_IRCTL_DEVICES-1, ir->l.minor); ret = -EBADRQC; - goto err; + goto out_free_thread; } - /* store this for getting back in open() later on */ - ir_devices[ir->l.minor] = ir; - /* * if we have the tx device, load the 'firmware'. We do this * after registering with lirc as otherwise hotplug seems to take @@ -1336,25 +1401,39 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) /* Special TX init */ ret = tx_init(ir->tx); if (ret != 0) - goto err; + goto out_unregister; } +out_ok: + mutex_unlock(&ir_devices_lock); return 0; -err: - /* FIXME - memory deallocation for all error cases needs work */ - /* undo everything, hopefully... */ - if (ir->rx != NULL) - ir_remove(ir->rx->c); - if (ir->tx != NULL) - ir_remove(ir->tx->c); - return ret; - -out_nomem: - /* FIXME - memory deallocation for all error cases needs work */ - zilog_error("memory allocation failure\n"); +out_unregister: + lirc_unregister_driver(ir->l.minor); +out_free_thread: + destroy_rx_kthread(ir->rx); +out_free_xx: + if (ir->rx != NULL) { + if (ir->rx->buf.fifo_initialized) + lirc_buffer_free(&ir->rx->buf); + if (ir->rx->c != NULL) + i2c_set_clientdata(ir->rx->c, NULL); + kfree(ir->rx); + } + if (ir->tx != NULL) { + if (ir->tx->c != NULL) + i2c_set_clientdata(ir->tx->c, NULL); + kfree(ir->tx); + } +out_free_ir: + del_ir_device(ir); kfree(ir); - return -ENOMEM; +out_no_ir: + zilog_error("%s: probing IR %s on %s (i2c-%d) failed with %d\n", + __func__, tx_probe ? "Tx" : "Rx", adap->name, adap->nr, + ret); + mutex_unlock(&ir_devices_lock); + return ret; } static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg) @@ -1370,6 +1449,7 @@ static int __init zilog_init(void) zilog_notify("Zilog/Hauppauge IR driver initializing\n"); mutex_init(&tx_data_lock); + mutex_init(&ir_devices_lock); request_module("firmware_class"); @@ -1406,5 +1486,5 @@ MODULE_PARM_DESC(minor, "Preferred minor device number"); module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "Enable debugging messages"); -module_param(disable_rx, bool, 0644); -MODULE_PARM_DESC(disable_rx, "Disable the IR receiver device"); +module_param(tx_only, bool, 0644); +MODULE_PARM_DESC(tx_only, "Only handle the IR transmit function"); -- cgit v1.2.3-70-g09d2 From b757730b022b4b1367d0435fcaa1b0a01e8aef42 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 15 Jan 2011 22:02:05 -0300 Subject: [media] lirc_zilog: Update IR Rx polling kthread start/stop and some printks The IR Rx polling thread was originally a kernel_thread long ago, and had only been minimally converted to a kthread. This patch finishes that conversion by - cleaning up all the unneeded completions - destroying the kthread properly by calling kthread_stop() - changing lirc_thread() to test kthread_should_stop() just before every point where it may sleep - reorganizing the lirc_thread() function so it uses fewer lines - modifying the name of the kthread from "lirc_zilog" to "zilog-rx-i2c-N", so ps will show which kthread polls which Zilog Z8 IR unit. Also some minor tweaks were made to logging emitted by the ir_probe() function. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 113 +++++++++++++++++--------------------- 1 file changed, 49 insertions(+), 64 deletions(-) diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index f2e8c63fa5b..f7aa5e4e98b 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -69,9 +69,6 @@ struct IR_rx { struct mutex buf_lock; /* RX polling thread data */ - struct completion *t_notify; - struct completion *t_notify2; - int shutdown; struct task_struct *task; /* RX read data */ @@ -171,12 +168,20 @@ static int add_to_buf(struct IR *ir) * data and we have space */ do { + if (kthread_should_stop()) + return -ENODATA; + /* * Lock i2c bus for the duration. RX/TX chips interfere so * this is worth it */ mutex_lock(&ir->ir_lock); + if (kthread_should_stop()) { + mutex_unlock(&ir->ir_lock); + return -ENODATA; + } + /* * Send random "poll command" (?) Windows driver does this * and it is a good point to detect chip failure. @@ -196,6 +201,10 @@ static int add_to_buf(struct IR *ir) "trying reset\n"); set_current_state(TASK_UNINTERRUPTIBLE); + if (kthread_should_stop()) { + mutex_unlock(&ir->ir_lock); + return -ENODATA; + } schedule_timeout((100 * HZ + 999) / 1000); if (ir->tx != NULL) ir->tx->need_boot = 1; @@ -205,6 +214,10 @@ static int add_to_buf(struct IR *ir) continue; } + if (kthread_should_stop()) { + mutex_unlock(&ir->ir_lock); + return -ENODATA; + } ret = i2c_master_recv(rx->c, keybuf, sizeof(keybuf)); mutex_unlock(&ir->ir_lock); if (ret != sizeof(keybuf)) { @@ -255,48 +268,35 @@ static int lirc_thread(void *arg) struct IR *ir = arg; struct IR_rx *rx = ir->rx; - if (rx->t_notify != NULL) - complete(rx->t_notify); - dprintk("poll thread started\n"); - do { - if (ir->open) { - set_current_state(TASK_INTERRUPTIBLE); + while (!kthread_should_stop()) { + set_current_state(TASK_INTERRUPTIBLE); - /* - * This is ~113*2 + 24 + jitter (2*repeat gap + - * code length). We use this interval as the chip - * resets every time you poll it (bad!). This is - * therefore just sufficient to catch all of the - * button presses. It makes the remote much more - * responsive. You can see the difference by - * running irw and holding down a button. With - * 100ms, the old polling interval, you'll notice - * breaks in the repeat sequence corresponding to - * lost keypresses. - */ - schedule_timeout((260 * HZ) / 1000); - if (rx->shutdown) - break; - if (!add_to_buf(ir)) - wake_up_interruptible(&rx->buf.wait_poll); - } else { - /* if device not opened so we can sleep half a second */ - set_current_state(TASK_INTERRUPTIBLE); + /* if device not opened, we can sleep half a second */ + if (!ir->open) { schedule_timeout(HZ/2); + continue; } - } while (!rx->shutdown); - if (rx->t_notify2 != NULL) - wait_for_completion(rx->t_notify2); - - rx->task = NULL; - if (rx->t_notify != NULL) - complete(rx->t_notify); + /* + * This is ~113*2 + 24 + jitter (2*repeat gap + code length). + * We use this interval as the chip resets every time you poll + * it (bad!). This is therefore just sufficient to catch all + * of the button presses. It makes the remote much more + * responsive. You can see the difference by running irw and + * holding down a button. With 100ms, the old polling + * interval, you'll notice breaks in the repeat sequence + * corresponding to lost keypresses. + */ + schedule_timeout((260 * HZ) / 1000); + if (kthread_should_stop()) + break; + if (!add_to_buf(ir)) + wake_up_interruptible(&rx->buf.wait_poll); + } dprintk("poll thread ended\n"); - /* FIXME - investigate if this is the proper way to shutdown a kthread*/ return 0; } @@ -1169,25 +1169,12 @@ static const struct file_operations lirc_fops = { .release = close }; -/* FIXME - investigate if this is the proper way to shutdown a kthread */ static void destroy_rx_kthread(struct IR_rx *rx) { - DECLARE_COMPLETION(tn); - DECLARE_COMPLETION(tn2); - - if (rx == NULL) - return; - /* end up polling thread */ - if (rx->task && !IS_ERR(rx->task)) { - rx->t_notify = &tn; - rx->t_notify2 = &tn2; - rx->shutdown = 1; - wake_up_process(rx->task); - complete(&tn2); - wait_for_completion(&tn); - rx->t_notify = NULL; - rx->t_notify2 = NULL; + if (rx != NULL && !IS_ERR_OR_NULL(rx->task)) { + kthread_stop(rx->task); + rx->task = NULL; } } @@ -1290,8 +1277,8 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) else if (tx_only) /* module option */ return -ENXIO; - zilog_info("%s: probing IR %s on %s (i2c-%d)\n", - __func__, tx_probe ? "Tx" : "Rx", adap->name, adap->nr); + zilog_info("probing IR %s on %s (i2c-%d)\n", + tx_probe ? "Tx" : "Rx", adap->name, adap->nr); mutex_lock(&ir_devices_lock); @@ -1360,27 +1347,23 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) /* Proceed only if we have the required Tx and Rx clients ready to go */ if (ir->tx == NULL || (ir->rx == NULL && !tx_only)) { - zilog_info("%s: probe of IR %s on %s (i2c-%d) done, waiting on " - "IR %s\n", __func__, tx_probe ? "Tx" : "Rx", - adap->name, adap->nr, tx_probe ? "Rx" : "Tx"); + zilog_info("probe of IR %s on %s (i2c-%d) done. Waiting on " + "IR %s.\n", tx_probe ? "Tx" : "Rx", adap->name, + adap->nr, tx_probe ? "Rx" : "Tx"); goto out_ok; } /* initialise RX device */ if (ir->rx != NULL) { - DECLARE_COMPLETION(tn); - /* try to fire up polling thread */ - ir->rx->t_notify = &tn; - ir->rx->task = kthread_run(lirc_thread, ir, "lirc_zilog"); + ir->rx->task = kthread_run(lirc_thread, ir, + "zilog-rx-i2c-%d", adap->nr); if (IS_ERR(ir->rx->task)) { ret = PTR_ERR(ir->rx->task); zilog_error("%s: could not start IR Rx polling thread" "\n", __func__); goto out_free_xx; } - wait_for_completion(&tn); - ir->rx->t_notify = NULL; } /* register with lirc */ @@ -1404,6 +1387,8 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) goto out_unregister; } + zilog_info("probe of IR %s on %s (i2c-%d) done. IR unit ready.\n", + tx_probe ? "Tx" : "Rx", adap->name, adap->nr); out_ok: mutex_unlock(&ir_devices_lock); return 0; -- cgit v1.2.3-70-g09d2 From 8090232a237ab62e22307fc060097da1a283dd66 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 15 Jan 2011 22:32:33 -0300 Subject: [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function The driver is now structured so that it must handle an IR Tx unit for a Z8 IR chip, or it refuses to handle that Z8 IR chip. This allows us to assume that ir->tx != NULL in a few places in the driver, and also allows us to always report Tx is available to userspace. Get rid of unneeded tests for ir->tx == NULL and always report that Tx is available. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 21 +++++---------------- 1 file changed, 5 insertions(+), 16 deletions(-) diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index f7aa5e4e98b..24d4b52bd79 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -206,8 +206,7 @@ static int add_to_buf(struct IR *ir) return -ENODATA; } schedule_timeout((100 * HZ + 999) / 1000); - if (ir->tx != NULL) - ir->tx->need_boot = 1; + ir->tx->need_boot = 1; ++failures; mutex_unlock(&ir->ir_lock); @@ -1010,10 +1009,9 @@ static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg) int result; unsigned long mode, features = 0; + features |= LIRC_CAN_SEND_PULSE; if (ir->rx != NULL) features |= LIRC_CAN_REC_LIRCCODE; - if (ir->tx != NULL) - features |= LIRC_CAN_SEND_PULSE; switch (cmd) { case LIRC_GET_LENGTH: @@ -1040,15 +1038,9 @@ static long ioctl(struct file *filep, unsigned int cmd, unsigned long arg) result = -EINVAL; break; case LIRC_GET_SEND_MODE: - if (!(features&LIRC_CAN_SEND_MASK)) - return -ENOSYS; - result = put_user(LIRC_MODE_PULSE, (unsigned long *) arg); break; case LIRC_SET_SEND_MODE: - if (!(features&LIRC_CAN_SEND_MASK)) - return -ENOSYS; - result = get_user(mode, (unsigned long *) arg); if (!result && mode != LIRC_MODE_PULSE) return -EINVAL; @@ -1380,12 +1372,9 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) * after registering with lirc as otherwise hotplug seems to take * 10s to create the lirc device. */ - if (ir->tx != NULL) { - /* Special TX init */ - ret = tx_init(ir->tx); - if (ret != 0) - goto out_unregister; - } + ret = tx_init(ir->tx); + if (ret != 0) + goto out_unregister; zilog_info("probe of IR %s on %s (i2c-%d) done. IR unit ready.\n", tx_probe ? "Tx" : "Rx", adap->name, adap->nr); -- cgit v1.2.3-70-g09d2 From 6830661ead850c0722e698da5c389db4d85079be Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 15 Jan 2011 22:56:42 -0300 Subject: [media] lirc_zilog: Remove useless struct i2c_driver.command function The ir_command() function is a do-nothing stub; remove it. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index 24d4b52bd79..18fae5442c3 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -1123,7 +1123,6 @@ static struct lirc_driver lirc_template = { static int ir_remove(struct i2c_client *client); static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id); -static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg); #define ID_FLAG_TX 0x01 #define ID_FLAG_HDPVR 0x02 @@ -1143,7 +1142,6 @@ static struct i2c_driver driver = { }, .probe = ir_probe, .remove = ir_remove, - .command = ir_command, .id_table = ir_transceiver_id, }; @@ -1410,12 +1408,6 @@ out_no_ir: return ret; } -static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg) -{ - /* nothing */ - return 0; -} - static int __init zilog_init(void) { int ret; -- cgit v1.2.3-70-g09d2 From c2790c7192be661e14b3d13d8bc187fd87bb9802 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 16 Jan 2011 15:20:07 -0300 Subject: [media] lirc_zilog: Add Andy Walls to copyright notice and authors list Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_zilog.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c index 18fae5442c3..3fe5f416019 100644 --- a/drivers/staging/lirc/lirc_zilog.c +++ b/drivers/staging/lirc/lirc_zilog.c @@ -20,6 +20,9 @@ * * parts are cut&pasted from the lirc_i2c.c driver * + * Numerous changes updating lirc_zilog.c in kernel 2.6.38 and later are + * Copyright (C) 2011 Andy Walls + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -1441,7 +1444,8 @@ module_exit(zilog_exit); MODULE_DESCRIPTION("Zilog/Hauppauge infrared transmitter driver (i2c stack)"); MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, " - "Ulrich Mueller, Stefan Jahn, Jerome Brock, Mark Weaver"); + "Ulrich Mueller, Stefan Jahn, Jerome Brock, Mark Weaver, " + "Andy Walls"); MODULE_LICENSE("GPL"); /* for compat with old name, which isn't all that accurate anymore */ MODULE_ALIAS("lirc_pvr150"); -- cgit v1.2.3-70-g09d2 From 1f1bfaa0a2e97fbeaf6cc5a07212de0afa3a6232 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 16 Jan 2011 15:21:27 -0300 Subject: [media] lirc_zilog: Update TODO.lirc_zilog Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/TODO.lirc_zilog | 36 ++++++++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-) diff --git a/drivers/staging/lirc/TODO.lirc_zilog b/drivers/staging/lirc/TODO.lirc_zilog index 6aa312df401..2d0263f0793 100644 --- a/drivers/staging/lirc/TODO.lirc_zilog +++ b/drivers/staging/lirc/TODO.lirc_zilog @@ -1,13 +1,37 @@ -The binding between hdpvr and lirc_zilog is currently disabled, +1. Both ir-kbd-i2c and lirc_zilog provide support for RX events. +The 'tx_only' lirc_zilog module parameter will allow ir-kbd-i2c +and lirc_zilog to coexist in the kernel, if the user requires such a set-up. +However the IR unit will not work well without coordination between the +two modules. A shared mutex, for transceiver access locking, needs to be +supplied by bridge drivers, in struct IR_i2_init_data, to both ir-kbd-i2c +and lirc_zilog, before they will coexist usefully. This should be fixed +before moving out of staging. + +2. References and locking need careful examination. For cx18 and ivtv PCI +cards, which are not easily "hot unplugged", the imperfect state of reference +counting and locking is acceptable if not correct. For USB connected units +like HD PVR, PVR USB2, HVR-1900, and HVR1950, the likelyhood of an Ooops on +unplug is probably great. Proper reference counting and locking needs to be +implemented before this module is moved out of staging. + +3. The binding between hdpvr and lirc_zilog is currently disabled, due to an OOPS reported a few years ago when both the hdpvr and cx18 drivers were loaded in his system. More details can be seen at: http://www.mail-archive.com/linux-media@vger.kernel.org/msg09163.html More tests need to be done, in order to fix the reported issue. -There's a conflict between ir-kbd-i2c: Both provide support for RX events. -Such conflict needs to be fixed, before moving it out of staging. +4. In addition to providing a shared mutex for transceiver access +locking, bridge drivers, if able, should provide a chip reset() callback +to lirc_zilog via struct IR_i2c_init_data. cx18 and ivtv already have routines +to perform Z8 chip resets via GPIO manipulations. This will allow lirc_zilog +to bring the chip back to normal when it hangs, in the same places the +original lirc_pvr150 driver code does. This is not strictly needed, so it +is not required to move lirc_zilog out of staging. + +5. Both lirc_zilog and ir-kbd-i2c support the Zilog Z8 for IR, as programmed +and installed on Hauppauge products. When working on either module, developers +must consider at least the following bridge drivers which mention an IR Rx unit +at address 0x71 (indicative of a Z8): -The way I2C probe works, it will try to register the driver twice, one -for RX and another for TX. The logic needs to be fixed to avoid such -issue. + ivtv cx18 hdpvr pvrusb2 bt8xx cx88 saa7134 -- cgit v1.2.3-70-g09d2 From c69a4af6f06916936c8afd44a175e2bf1fbefaec Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 16 Jan 2011 15:45:32 -0300 Subject: [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71 This reverts a portion of commit 44243fc2ef99948bc9b046901880885616dd5e89 A commit for which I errantly recommended that defaults for I2C address 0x71 not be set by ir-kbd-i2c.c The pvrusb2 and bttv drivers currently rely on ir-kbd-i2c setting defaults for that address. Until I can get those bridge drivers fixed to properly send IR_i2c_init_data for boards with Zilog Z8 chips, just add back the default settings for I2C address 0x71. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ir-kbd-i2c.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c index b173e409cd2..d2b20ad383a 100644 --- a/drivers/media/video/ir-kbd-i2c.c +++ b/drivers/media/video/ir-kbd-i2c.c @@ -323,6 +323,12 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id) rc_type = RC_TYPE_OTHER; ir_codes = RC_MAP_AVERMEDIA_CARDBUS; break; + case 0x71: + name = "Hauppauge/Zilog Z8"; + ir->get_key = get_key_haup_xvr; + rc_type = RC_TYPE_RC5; + ir_codes = hauppauge ? RC_MAP_HAUPPAUGE_NEW : RC_MAP_RC5_TV; + break; } /* Let the caller override settings */ -- cgit v1.2.3-70-g09d2 From 4999e27a62eaf28e88bc69ab8cf11697e0dda261 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 16 Jan 2011 21:21:03 -0300 Subject: [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c When registering an IR Rx device with the I2C subsystem, provide more detailed information about the IR device and default remote configuration for the IR driver modules. Also explicitly register any IR Tx device with the I2C subsystem. Signed-off-by: Andy Walls Acked-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h | 2 + drivers/media/video/pvrusb2/pvrusb2-i2c-core.c | 62 +++++++++++++++------- 2 files changed, 45 insertions(+), 19 deletions(-) diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h index ac94a8bf883..305e6aaa844 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h @@ -40,6 +40,7 @@ #include "pvrusb2-io.h" #include #include +#include #include "pvrusb2-devattr.h" /* Legal values for PVR2_CID_HSM */ @@ -202,6 +203,7 @@ struct pvr2_hdw { /* IR related */ unsigned int ir_scheme_active; /* IR scheme as seen from the outside */ + struct IR_i2c_init_data ir_init_data; /* params passed to IR modules */ /* Frequency table */ unsigned int freqTable[FREQTABLE_SIZE]; diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c index 7cbe18c4ca9..ccc884948f3 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c +++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c @@ -19,6 +19,7 @@ */ #include +#include #include "pvrusb2-i2c-core.h" #include "pvrusb2-hdw-internal.h" #include "pvrusb2-debug.h" @@ -48,13 +49,6 @@ module_param_named(disable_autoload_ir_video, pvr2_disable_ir_video, MODULE_PARM_DESC(disable_autoload_ir_video, "1=do not try to autoload ir_video IR receiver"); -/* Mapping of IR schemes to known I2C addresses - if any */ -static const unsigned char ir_video_addresses[] = { - [PVR2_IR_SCHEME_ZILOG] = 0x71, - [PVR2_IR_SCHEME_29XXX] = 0x18, - [PVR2_IR_SCHEME_24XXX] = 0x18, -}; - static int pvr2_i2c_write(struct pvr2_hdw *hdw, /* Context */ u8 i2c_addr, /* I2C address we're talking to */ u8 *data, /* Data to write */ @@ -574,26 +568,56 @@ static void do_i2c_scan(struct pvr2_hdw *hdw) static void pvr2_i2c_register_ir(struct pvr2_hdw *hdw) { struct i2c_board_info info; - unsigned char addr = 0; + struct IR_i2c_init_data *init_data = &hdw->ir_init_data; if (pvr2_disable_ir_video) { pvr2_trace(PVR2_TRACE_INFO, "Automatic binding of ir_video has been disabled."); return; } - if (hdw->ir_scheme_active < ARRAY_SIZE(ir_video_addresses)) { - addr = ir_video_addresses[hdw->ir_scheme_active]; - } - if (!addr) { + memset(&info, 0, sizeof(struct i2c_board_info)); + switch (hdw->ir_scheme_active) { + case PVR2_IR_SCHEME_24XXX: /* FX2-controlled IR */ + case PVR2_IR_SCHEME_29XXX: /* Original 29xxx device */ + init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW; + init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP; + init_data->type = RC_TYPE_RC5; + init_data->name = hdw->hdw_desc->description; + init_data->polling_interval = 100; /* ms From ir-kbd-i2c */ + /* IR Receiver */ + info.addr = 0x18; + info.platform_data = init_data; + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + pvr2_trace(PVR2_TRACE_INFO, "Binding %s to i2c address 0x%02x.", + info.type, info.addr); + i2c_new_device(&hdw->i2c_adap, &info); + break; + case PVR2_IR_SCHEME_ZILOG: /* HVR-1950 style */ + case PVR2_IR_SCHEME_24XXX_MCE: /* 24xxx MCE device */ + init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW; + init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; + init_data->type = RC_TYPE_RC5; + init_data->name = hdw->hdw_desc->description; + init_data->polling_interval = 260; /* ms From lirc_zilog */ + /* IR Receiver */ + info.addr = 0x71; + info.platform_data = init_data; + strlcpy(info.type, "ir_rx_z8f0811_haup", I2C_NAME_SIZE); + pvr2_trace(PVR2_TRACE_INFO, "Binding %s to i2c address 0x%02x.", + info.type, info.addr); + i2c_new_device(&hdw->i2c_adap, &info); + /* IR Trasmitter */ + info.addr = 0x70; + info.platform_data = init_data; + strlcpy(info.type, "ir_tx_z8f0811_haup", I2C_NAME_SIZE); + pvr2_trace(PVR2_TRACE_INFO, "Binding %s to i2c address 0x%02x.", + info.type, info.addr); + i2c_new_device(&hdw->i2c_adap, &info); + break; + default: /* The device either doesn't support I2C-based IR or we don't know (yet) how to operate IR on the device. */ - return; + break; } - pvr2_trace(PVR2_TRACE_INFO, - "Binding ir_video to i2c address 0x%02x.", addr); - memset(&info, 0, sizeof(struct i2c_board_info)); - strlcpy(info.type, "ir_video", I2C_NAME_SIZE); - info.addr = addr; - i2c_new_device(&hdw->i2c_adap, &info); } void pvr2_i2c_core_init(struct pvr2_hdw *hdw) -- cgit v1.2.3-70-g09d2 From c959acfddb3d24ecfdae1a280a7a1785d9df81d1 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 16 Jan 2011 11:03:28 -0300 Subject: [media] v4l2-ctrls: fix missing 'read-only' check VIDIOC_S_CTRL did not check against read-only controls. Even worse, for controls of type CTRL_CLASS it would cause a kernel oops since those controls do not have a s_ctrl op. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ctrls.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index 0d1a3d83137..22a9a722f52 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -1824,6 +1824,9 @@ static int set_ctrl(struct v4l2_ctrl *ctrl, s32 *val) int ret; int i; + if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY) + return -EACCES; + v4l2_ctrl_lock(ctrl); /* Reset the 'is_new' flags of the cluster */ -- cgit v1.2.3-70-g09d2 From 829fb2dcb5252c5064d12cdaf65d2828420e07b3 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 16 Jan 2011 11:21:40 -0300 Subject: [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs When queryctrl is called with a V4L2_CID_PRIVATE_BASE control ID, then currently it is replaced by the real internal ID. This is not according to the spec so keep the V4L2_CID_PRIVATE_BASE ID in this case. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ctrls.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index 22a9a722f52..01251431fd2 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -1344,7 +1344,10 @@ int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc) ctrl = ref->ctrl; memset(qc, 0, sizeof(*qc)); - qc->id = ctrl->id; + if (id >= V4L2_CID_PRIVATE_BASE) + qc->id = id; + else + qc->id = ctrl->id; strlcpy(qc->name, ctrl->name, sizeof(qc->name)); qc->minimum = ctrl->minimum; qc->maximum = ctrl->maximum; -- cgit v1.2.3-70-g09d2 From 3a6be8d83c82253692f788a65f2d65aa33e37db1 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 16 Jan 2011 17:09:54 -0300 Subject: [media] DocBook/v4l: fix validation error in dev-rds.xml Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/v4l/dev-rds.xml | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/v4l/dev-rds.xml b/Documentation/DocBook/v4l/dev-rds.xml index 360d2737e64..2427f54397e 100644 --- a/Documentation/DocBook/v4l/dev-rds.xml +++ b/Documentation/DocBook/v4l/dev-rds.xml @@ -75,6 +75,7 @@ as follows:
+ RDS datastructures struct <structname>v4l2_rds_data</structname> @@ -129,10 +130,11 @@ as follows:
Block defines - + - + + V4L2_RDS_BLOCK_MSK -- cgit v1.2.3-70-g09d2 From bda50bcd0cc21d9d6dd8c82628f763ab108260a6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 16 Jan 2011 17:44:17 -0300 Subject: [media] DocBook/v4l: update V4L2 revision and update copyright years Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/dvb/dvbapi.xml | 2 +- Documentation/DocBook/media.tmpl | 4 ++-- Documentation/DocBook/v4l/v4l2.xml | 3 ++- 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/Documentation/DocBook/dvb/dvbapi.xml b/Documentation/DocBook/dvb/dvbapi.xml index e3a97fdd62a..ad8678d4891 100644 --- a/Documentation/DocBook/dvb/dvbapi.xml +++ b/Documentation/DocBook/dvb/dvbapi.xml @@ -28,7 +28,7 @@ Convergence GmbH - 2009-2010 + 2009-2011 Mauro Carvalho Chehab diff --git a/Documentation/DocBook/media.tmpl b/Documentation/DocBook/media.tmpl index f11048d4053..a99088aae1a 100644 --- a/Documentation/DocBook/media.tmpl +++ b/Documentation/DocBook/media.tmpl @@ -28,7 +28,7 @@ LINUX MEDIA INFRASTRUCTURE API - 2009-2010 + 2009-2011 LinuxTV Developers @@ -86,7 +86,7 @@ Foundation. A copy of the license is included in the chapter entitled - 2009-2010 + 2009-2011 Mauro Carvalho Chehab diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/v4l/v4l2.xml index 839e93e875a..9288af96de3 100644 --- a/Documentation/DocBook/v4l/v4l2.xml +++ b/Documentation/DocBook/v4l/v4l2.xml @@ -100,6 +100,7 @@ Remote Controller chapter. 2008 2009 2010 + 2011 Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab @@ -381,7 +382,7 @@ and discussions on the V4L mailing list. Video for Linux Two API Specification - Revision 2.6.33 + Revision 2.6.38 &sub-common; -- cgit v1.2.3-70-g09d2 From 01c40c048b0f3f377e6d27b35fd99f04efcc21dd Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 19 Nov 2010 11:20:06 -0300 Subject: [media] v4l: Include linux/videodev2.h in media/v4l2-ctrls.h The later makes extensive use of structures defined in the former. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- include/media/v4l2-ctrls.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h index fcc9a0cf8ff..97d063837b6 100644 --- a/include/media/v4l2-ctrls.h +++ b/include/media/v4l2-ctrls.h @@ -23,6 +23,7 @@ #include #include +#include /* forward references */ struct v4l2_ctrl_handler; -- cgit v1.2.3-70-g09d2 From eac9aa005a2e0676d07f1906f9933fd055eb1f0b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 7 Dec 2010 08:57:25 -0300 Subject: [media] v4l: Fix a use-before-set in the control framework v4l2_queryctrl sets the step value based on the control type. That would be fine if it used the control type stored in the V4L2 kernel control object, not the one stored in the userspace ioctl structure that has just been memset to 0. Fix this. Signed-off-by: Laurent Pinchart Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ctrls.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c index 01251431fd2..ef66d2af0c5 100644 --- a/drivers/media/video/v4l2-ctrls.c +++ b/drivers/media/video/v4l2-ctrls.c @@ -1352,7 +1352,7 @@ int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc) qc->minimum = ctrl->minimum; qc->maximum = ctrl->maximum; qc->default_value = ctrl->default_value; - if (qc->type == V4L2_CTRL_TYPE_MENU) + if (ctrl->type == V4L2_CTRL_TYPE_MENU) qc->step = 1; else qc->step = ctrl->step; -- cgit v1.2.3-70-g09d2 From bd5ba3ba2ead7248124723dac2481d0992e75e91 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 31 Dec 2010 11:27:38 -0300 Subject: [media] w9966: zero device state after a detach After a detach zero the whole device state to ensure a clean slate on the next attach. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/w9966.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c index 019ee206cbe..fa35639d0c1 100644 --- a/drivers/media/video/w9966.c +++ b/drivers/media/video/w9966.c @@ -937,6 +937,7 @@ static void w9966_term(struct w9966 *cam) parport_unregister_device(cam->pdev); w9966_set_state(cam, W9966_STATE_PDEV, 0); } + memset(cam, 0, sizeof(*cam)); } -- cgit v1.2.3-70-g09d2 From 6ce3ced4f73e3f0c345f47dc99fd21f2248724a8 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 31 Dec 2010 11:28:51 -0300 Subject: [media] zoran: use video_device_alloc instead of kmalloc Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran_card.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c index 9cdc3bb15b1..9f2bac51964 100644 --- a/drivers/media/video/zoran/zoran_card.c +++ b/drivers/media/video/zoran/zoran_card.c @@ -1041,7 +1041,7 @@ zr36057_init (struct zoran *zr) /* allocate memory *before* doing anything to the hardware * in case allocation fails */ zr->stat_com = kzalloc(BUZ_NUM_STAT_COM * 4, GFP_KERNEL); - zr->video_dev = kmalloc(sizeof(struct video_device), GFP_KERNEL); + zr->video_dev = video_device_alloc(); if (!zr->stat_com || !zr->video_dev) { dprintk(1, KERN_ERR -- cgit v1.2.3-70-g09d2 From 46b633779b299c7fb3d78f153a5034055f99cd45 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 31 Dec 2010 11:47:23 -0300 Subject: [media] v4l2-dev: don't memset video_device.dev Zeroing video_device.dev causes a memory leak if video_set_drvdata was called before video_register_device was called. video_set_drvdata calls dev_set_drvdata which allocates video_device.dev.p. memsetting this will prevent freeing of that memory. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-dev.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 359e23290a7..341764a3a99 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -419,6 +419,10 @@ static int get_index(struct video_device *vdev) * The registration code assigns minor numbers and device node numbers * based on the requested type and registers the new device node with * the kernel. + * + * This function assumes that struct video_device was zeroed when it + * was allocated and does not contain any stale date. + * * An error is returned if no free minor or device node number could be * found, or if the registration of the device node failed. * @@ -440,7 +444,6 @@ static int __video_register_device(struct video_device *vdev, int type, int nr, int minor_offset = 0; int minor_cnt = VIDEO_NUM_DEVICES; const char *name_base; - void *priv = vdev->dev.p; /* A minor value of -1 marks this video device as never having been registered */ @@ -559,10 +562,6 @@ static int __video_register_device(struct video_device *vdev, int type, int nr, } /* Part 4: register the device with sysfs */ - memset(&vdev->dev, 0, sizeof(vdev->dev)); - /* The memset above cleared the device's device_private, so - put back the copy we made earlier. */ - vdev->dev.p = priv; vdev->dev.class = &video_class; vdev->dev.devt = MKDEV(VIDEO_MAJOR, vdev->minor); if (vdev->parent) -- cgit v1.2.3-70-g09d2 From 672dcd54774ea1b03da8f2baa1cdbf827927fc85 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 11 Jan 2011 17:48:21 -0300 Subject: [media] v4l2-device: fix 'use-after-freed' oops Fix a bug in v4l2_device_unregister where the sd pointer can be dereferenced after it was freed. Normally the i2c adapter is removed before this function is called. Removing the adapter will also unregister all subdevs on that adapter, so generally v4l2_device_unregister has nothing to do. However, in the case of a platform i2c bus that bus is generally not freed. In that case, after freeing the i2c subdevice the code will fall into the second block when it tests if the subdev is a SPI device. But by that time the subdev is already freed and the kernel oopses. The fix is trivial: continue with the loop after freeing the i2c or spi subdevice. Signed-off-by: Hans Verkuil Reported-by: Daniel Drake Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-device.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c index b24f002ffa6..ce64fe16bc6 100644 --- a/drivers/media/video/v4l2-device.c +++ b/drivers/media/video/v4l2-device.c @@ -100,6 +100,7 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev) is a platform bus, then it is never deleted. */ if (client) i2c_unregister_device(client); + continue; } #endif #if defined(CONFIG_SPI) @@ -108,6 +109,7 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev) if (spi) spi_unregister_device(spi); + continue; } #endif } -- cgit v1.2.3-70-g09d2 From 706c57d802394e2fe720ebc929234a678f94e716 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 6 Jan 2011 13:23:13 -0300 Subject: [media] rc/mceusb: timeout should be in ns, not us Fixes an egregious bug in mceusb driver, where the receiver was being put into idle mode far sooner than it should have, thanks to storing a timeout value that in us where it should be ns. Basically, the receiver kept going into idle mode before a trailing space had been fully received, which was causing problems for some protocols, most notably manifesting as lirc userspace never receiving a trailing space for any rc5 signals. Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/mceusb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 2d9113493cf..079353e5d55 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -816,7 +816,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index) switch (ir->buf_in[index]) { /* 2-byte return value commands */ case MCE_CMD_S_TIMEOUT: - ir->rc->timeout = MS_TO_US((hi << 8 | lo) / 2); + ir->rc->timeout = MS_TO_NS((hi << 8 | lo) / 2); break; /* 1-byte return value commands */ @@ -1060,7 +1060,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir) rc->priv = ir; rc->driver_type = RC_DRIVER_IR_RAW; rc->allowed_protos = RC_TYPE_ALL; - rc->timeout = MS_TO_US(1000); + rc->timeout = MS_TO_NS(1000); if (!ir->flags.no_tx) { rc->s_tx_mask = mceusb_set_tx_mask; rc->s_tx_carrier = mceusb_set_tx_carrier; -- cgit v1.2.3-70-g09d2 From 324b04ba5da7918a2409f8113e46843bfbd89e67 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Fri, 14 Jan 2011 16:25:21 -0300 Subject: [media] hdpvr: enable IR part A number of things going on here, but the end result is that the IR part on the hdpvr gets enabled, and can be used with ir-kbd-i2c and/or lirc_zilog. First up, there are some conditional build fixes that come into play whether i2c is built-in or modular. Second, we're swapping out i2c_new_probed_device() for i2c_new_device(), as in my testing, probing always fails, but we *know* that all hdpvr devices have a z8 chip at 0x70 and 0x71. Third, we're poking at an i2c address directly without a client, and writing some magic bits to actually turn on this IR part (this could use some improvement in the future). Fourth, some of the i2c_adapter storage has been reworked, as the existing implementation used to lead to an oops following i2c changes c. 2.6.31. Earlier editions of this patch have been floating around the 'net for a while, including being patched into Fedora kernels, and they *do* work. This specific version isn't yet tested, beyond loading ir-kbd-i2c and confirming that it does bind to the RX address of the hdpvr. [mchehab@redhat.com: I2C_CLASS_TV_ANALOG is not defined. Fix compilation bug] Signed-off-by: Jarod Wilson Acked-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/hdpvr/Makefile | 4 +- drivers/media/video/hdpvr/hdpvr-core.c | 10 ++- drivers/media/video/hdpvr/hdpvr-i2c.c | 119 +++++++++++++++----------------- drivers/media/video/hdpvr/hdpvr-video.c | 7 +- drivers/media/video/hdpvr/hdpvr.h | 2 +- 5 files changed, 65 insertions(+), 77 deletions(-) diff --git a/drivers/media/video/hdpvr/Makefile b/drivers/media/video/hdpvr/Makefile index e0230fcb2e3..3baa9f613ca 100644 --- a/drivers/media/video/hdpvr/Makefile +++ b/drivers/media/video/hdpvr/Makefile @@ -1,6 +1,4 @@ -hdpvr-objs := hdpvr-control.o hdpvr-core.o hdpvr-video.o - -hdpvr-$(CONFIG_I2C) += hdpvr-i2c.o +hdpvr-objs := hdpvr-control.o hdpvr-core.o hdpvr-video.o hdpvr-i2c.o obj-$(CONFIG_VIDEO_HDPVR) += hdpvr.o diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c index f7d1ee55185..a6572e5ae36 100644 --- a/drivers/media/video/hdpvr/hdpvr-core.c +++ b/drivers/media/video/hdpvr/hdpvr-core.c @@ -378,19 +378,17 @@ static int hdpvr_probe(struct usb_interface *interface, goto error; } -#ifdef CONFIG_I2C - /* until i2c is working properly */ - retval = 0; /* hdpvr_register_i2c_adapter(dev); */ +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + retval = hdpvr_register_i2c_adapter(dev); if (retval < 0) { v4l2_err(&dev->v4l2_dev, "registering i2c adapter failed\n"); goto error; } - /* until i2c is working properly */ - retval = 0; /* hdpvr_register_i2c_ir(dev); */ + retval = hdpvr_register_i2c_ir(dev); if (retval < 0) v4l2_err(&dev->v4l2_dev, "registering i2c IR devices failed\n"); -#endif /* CONFIG_I2C */ +#endif /* let the user know what node this device is now attached to */ v4l2_info(&dev->v4l2_dev, "device now attached to %s\n", diff --git a/drivers/media/video/hdpvr/hdpvr-i2c.c b/drivers/media/video/hdpvr/hdpvr-i2c.c index 24966aa02a7..45b88cf60d6 100644 --- a/drivers/media/video/hdpvr/hdpvr-i2c.c +++ b/drivers/media/video/hdpvr/hdpvr-i2c.c @@ -13,6 +13,8 @@ * */ +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + #include #include @@ -28,55 +30,31 @@ #define Z8F0811_IR_TX_I2C_ADDR 0x70 #define Z8F0811_IR_RX_I2C_ADDR 0x71 -static const u8 ir_i2c_addrs[] = { - Z8F0811_IR_TX_I2C_ADDR, - Z8F0811_IR_RX_I2C_ADDR, -}; -static const char * const ir_devicenames[] = { - "ir_tx_z8f0811_hdpvr", - "ir_rx_z8f0811_hdpvr", +static struct i2c_board_info hdpvr_i2c_board_info = { + I2C_BOARD_INFO("ir_tx_z8f0811_hdpvr", Z8F0811_IR_TX_I2C_ADDR), + I2C_BOARD_INFO("ir_rx_z8f0811_hdpvr", Z8F0811_IR_RX_I2C_ADDR), }; -static int hdpvr_new_i2c_ir(struct hdpvr_device *dev, struct i2c_adapter *adap, - const char *type, u8 addr) +int hdpvr_register_i2c_ir(struct hdpvr_device *dev) { - struct i2c_board_info info; + struct i2c_client *c; struct IR_i2c_init_data *init_data = &dev->ir_i2c_init_data; - unsigned short addr_list[2] = { addr, I2C_CLIENT_END }; - - memset(&info, 0, sizeof(struct i2c_board_info)); - strlcpy(info.type, type, I2C_NAME_SIZE); /* Our default information for ir-kbd-i2c.c to use */ - switch (addr) { - case Z8F0811_IR_RX_I2C_ADDR: - init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW; - init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; - init_data->type = RC_TYPE_RC5; - init_data->name = "HD PVR"; - info.platform_data = init_data; - break; - } - - return i2c_new_probed_device(adap, &info, addr_list, NULL) == NULL ? - -1 : 0; -} + init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW; + init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR; + init_data->type = RC_TYPE_RC5; + init_data->name = "HD PVR"; + hdpvr_i2c_board_info.platform_data = init_data; -int hdpvr_register_i2c_ir(struct hdpvr_device *dev) -{ - int i; - int ret = 0; + c = i2c_new_device(&dev->i2c_adapter, &hdpvr_i2c_board_info); - for (i = 0; i < ARRAY_SIZE(ir_i2c_addrs); i++) - ret += hdpvr_new_i2c_ir(dev, dev->i2c_adapter, - ir_devicenames[i], ir_i2c_addrs[i]); - - return ret; + return (c == NULL) ? -ENODEV : 0; } -static int hdpvr_i2c_read(struct hdpvr_device *dev, unsigned char addr, - char *data, int len) +static int hdpvr_i2c_read(struct hdpvr_device *dev, int bus, + unsigned char addr, char *data, int len) { int ret; char *buf = kmalloc(len, GFP_KERNEL); @@ -86,7 +64,7 @@ static int hdpvr_i2c_read(struct hdpvr_device *dev, unsigned char addr, ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), REQTYPE_I2C_READ, CTRL_READ_REQUEST, - 0x100|addr, 0, buf, len, 1000); + (bus << 8) | addr, 0, buf, len, 1000); if (ret == len) { memcpy(data, buf, len); @@ -99,8 +77,8 @@ static int hdpvr_i2c_read(struct hdpvr_device *dev, unsigned char addr, return ret; } -static int hdpvr_i2c_write(struct hdpvr_device *dev, unsigned char addr, - char *data, int len) +static int hdpvr_i2c_write(struct hdpvr_device *dev, int bus, + unsigned char addr, char *data, int len) { int ret; char *buf = kmalloc(len, GFP_KERNEL); @@ -111,7 +89,7 @@ static int hdpvr_i2c_write(struct hdpvr_device *dev, unsigned char addr, ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), REQTYPE_I2C_WRITE, CTRL_WRITE_REQUEST, - 0x100|addr, 0, buf, len, 1000); + (bus << 8) | addr, 0, buf, len, 1000); if (ret < 0) goto error; @@ -121,7 +99,7 @@ static int hdpvr_i2c_write(struct hdpvr_device *dev, unsigned char addr, REQTYPE_I2C_WRITE_STATT, CTRL_READ_REQUEST, 0, 0, buf, 2, 1000); - if (ret == 2) + if ((ret == 2) && (buf[1] == (len - 1))) ret = 0; else if (ret >= 0) ret = -EIO; @@ -146,10 +124,10 @@ static int hdpvr_transfer(struct i2c_adapter *i2c_adapter, struct i2c_msg *msgs, addr = msgs[i].addr << 1; if (msgs[i].flags & I2C_M_RD) - retval = hdpvr_i2c_read(dev, addr, msgs[i].buf, + retval = hdpvr_i2c_read(dev, 1, addr, msgs[i].buf, msgs[i].len); else - retval = hdpvr_i2c_write(dev, addr, msgs[i].buf, + retval = hdpvr_i2c_write(dev, 1, addr, msgs[i].buf, msgs[i].len); } @@ -168,30 +146,47 @@ static struct i2c_algorithm hdpvr_algo = { .functionality = hdpvr_functionality, }; +static struct i2c_adapter hdpvr_i2c_adapter_template = { + .name = "Hauppage HD PVR I2C", + .owner = THIS_MODULE, + .algo = &hdpvr_algo, +}; + +static int hdpvr_activate_ir(struct hdpvr_device *dev) +{ + char buffer[8]; + + mutex_lock(&dev->i2c_mutex); + + hdpvr_i2c_read(dev, 0, 0x54, buffer, 1); + + buffer[0] = 0; + buffer[1] = 0x8; + hdpvr_i2c_write(dev, 1, 0x54, buffer, 2); + + buffer[1] = 0x18; + hdpvr_i2c_write(dev, 1, 0x54, buffer, 2); + + mutex_unlock(&dev->i2c_mutex); + + return 0; +} + int hdpvr_register_i2c_adapter(struct hdpvr_device *dev) { - struct i2c_adapter *i2c_adap; int retval = -ENOMEM; - i2c_adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); - if (i2c_adap == NULL) - goto error; + hdpvr_activate_ir(dev); - strlcpy(i2c_adap->name, "Hauppauge HD PVR I2C", - sizeof(i2c_adap->name)); - i2c_adap->algo = &hdpvr_algo; - i2c_adap->owner = THIS_MODULE; - i2c_adap->dev.parent = &dev->udev->dev; + memcpy(&dev->i2c_adapter, &hdpvr_i2c_adapter_template, + sizeof(struct i2c_adapter)); + dev->i2c_adapter.dev.parent = &dev->udev->dev; - i2c_set_adapdata(i2c_adap, dev); + i2c_set_adapdata(&dev->i2c_adapter, dev); - retval = i2c_add_adapter(i2c_adap); + retval = i2c_add_adapter(&dev->i2c_adapter); - if (!retval) - dev->i2c_adapter = i2c_adap; - else - kfree(i2c_adap); - -error: return retval; } + +#endif diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c index d38fe1043e4..514aea76eaa 100644 --- a/drivers/media/video/hdpvr/hdpvr-video.c +++ b/drivers/media/video/hdpvr/hdpvr-video.c @@ -1220,12 +1220,9 @@ static void hdpvr_device_release(struct video_device *vdev) v4l2_device_unregister(&dev->v4l2_dev); /* deregister I2C adapter */ -#ifdef CONFIG_I2C +#if defined(CONFIG_I2C) || (CONFIG_I2C_MODULE) mutex_lock(&dev->i2c_mutex); - if (dev->i2c_adapter) - i2c_del_adapter(dev->i2c_adapter); - kfree(dev->i2c_adapter); - dev->i2c_adapter = NULL; + i2c_del_adapter(&dev->i2c_adapter); mutex_unlock(&dev->i2c_mutex); #endif /* CONFIG_I2C */ diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h index 37f1e4c7675..29f74269400 100644 --- a/drivers/media/video/hdpvr/hdpvr.h +++ b/drivers/media/video/hdpvr/hdpvr.h @@ -106,7 +106,7 @@ struct hdpvr_device { struct work_struct worker; /* I2C adapter */ - struct i2c_adapter *i2c_adapter; + struct i2c_adapter i2c_adapter; /* I2C lock */ struct mutex i2c_mutex; -- cgit v1.2.3-70-g09d2 From 559d162e1ebcdb61e89f154f2c2db376af072b0e Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Fri, 14 Jan 2011 16:40:32 -0300 Subject: [media] hdpvr: reduce latency of i2c read/write w/recycled buffer The current hdpvr code kmalloc's a new buffer for every i2c read and write. Rather than do that, lets allocate a buffer in the driver's device struct and just use that every time. The size I've chosen for the buffer is the maximum size I could ascertain might be used by either ir-kbd-i2c or lirc_zilog, plus a bit of padding (lirc_zilog may use up to 100 bytes on tx, rounded that up to 128). Note that this might also remedy user reports of very sluggish behavior of IR receive with hdpvr hardware. v2: make sure (len <= (dev->i2c_buf)) [Jean Delvare] Reported-by: Jean Delvare Acked-by: Jean Delvare Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/hdpvr/hdpvr-i2c.c | 30 +++++++++++++----------------- drivers/media/video/hdpvr/hdpvr.h | 3 +++ 2 files changed, 16 insertions(+), 17 deletions(-) diff --git a/drivers/media/video/hdpvr/hdpvr-i2c.c b/drivers/media/video/hdpvr/hdpvr-i2c.c index 45b88cf60d6..89b71faeaac 100644 --- a/drivers/media/video/hdpvr/hdpvr-i2c.c +++ b/drivers/media/video/hdpvr/hdpvr-i2c.c @@ -57,23 +57,21 @@ static int hdpvr_i2c_read(struct hdpvr_device *dev, int bus, unsigned char addr, char *data, int len) { int ret; - char *buf = kmalloc(len, GFP_KERNEL); - if (!buf) - return -ENOMEM; + + if (len > sizeof(dev->i2c_buf)) + return -EINVAL; ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), REQTYPE_I2C_READ, CTRL_READ_REQUEST, - (bus << 8) | addr, 0, buf, len, 1000); + (bus << 8) | addr, 0, &dev->i2c_buf, len, 1000); if (ret == len) { - memcpy(data, buf, len); + memcpy(data, &dev->i2c_buf, len); ret = 0; } else if (ret >= 0) ret = -EIO; - kfree(buf); - return ret; } @@ -81,31 +79,29 @@ static int hdpvr_i2c_write(struct hdpvr_device *dev, int bus, unsigned char addr, char *data, int len) { int ret; - char *buf = kmalloc(len, GFP_KERNEL); - if (!buf) - return -ENOMEM; - memcpy(buf, data, len); + if (len > sizeof(dev->i2c_buf)) + return -EINVAL; + + memcpy(&dev->i2c_buf, data, len); ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), REQTYPE_I2C_WRITE, CTRL_WRITE_REQUEST, - (bus << 8) | addr, 0, buf, len, 1000); + (bus << 8) | addr, 0, &dev->i2c_buf, len, 1000); if (ret < 0) - goto error; + return ret; ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), REQTYPE_I2C_WRITE_STATT, CTRL_READ_REQUEST, - 0, 0, buf, 2, 1000); + 0, 0, &dev->i2c_buf, 2, 1000); - if ((ret == 2) && (buf[1] == (len - 1))) + if ((ret == 2) && (dev->i2c_buf[1] == (len - 1))) ret = 0; else if (ret >= 0) ret = -EIO; -error: - kfree(buf); return ret; } diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h index 29f74269400..ee74e3be9a6 100644 --- a/drivers/media/video/hdpvr/hdpvr.h +++ b/drivers/media/video/hdpvr/hdpvr.h @@ -25,6 +25,7 @@ KERNEL_VERSION(HDPVR_MAJOR_VERSION, HDPVR_MINOR_VERSION, HDPVR_RELEASE) #define HDPVR_MAX 8 +#define HDPVR_I2C_MAX_SIZE 128 /* Define these values to match your devices */ #define HD_PVR_VENDOR_ID 0x2040 @@ -109,6 +110,8 @@ struct hdpvr_device { struct i2c_adapter i2c_adapter; /* I2C lock */ struct mutex i2c_mutex; + /* I2C message buffer space */ + char i2c_buf[HDPVR_I2C_MAX_SIZE]; /* For passing data to ir-kbd-i2c */ struct IR_i2c_init_data ir_i2c_init_data; -- cgit v1.2.3-70-g09d2 From 88914bdf8c677ebd7e797adac05e47303fd6ac77 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Mon, 17 Jan 2011 16:02:00 -0300 Subject: [media] staging/lirc: fix mem leaks and ptr err usage When the lirc drivers were converted over to using memdup_user, I mistakenly also removed corresponding calls to kfree. Add those back. I also screwed up on the allocation error check in lirc_serial, using if (PTR_ERR()) instead of if (IS_ERR()), which broke transmit. Reported-by: Jiri Fojtasek Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/lirc/lirc_imon.c | 1 + drivers/staging/lirc/lirc_it87.c | 1 + drivers/staging/lirc/lirc_parallel.c | 19 ++++++++++++++----- drivers/staging/lirc/lirc_sasem.c | 1 + drivers/staging/lirc/lirc_serial.c | 3 ++- drivers/staging/lirc/lirc_sir.c | 1 + 6 files changed, 20 insertions(+), 6 deletions(-) diff --git a/drivers/staging/lirc/lirc_imon.c b/drivers/staging/lirc/lirc_imon.c index 0da6b9518af..235cab0eb08 100644 --- a/drivers/staging/lirc/lirc_imon.c +++ b/drivers/staging/lirc/lirc_imon.c @@ -447,6 +447,7 @@ static ssize_t vfd_write(struct file *file, const char *buf, exit: mutex_unlock(&context->ctx_lock); + kfree(data_buf); return (!retval) ? n_bytes : retval; } diff --git a/drivers/staging/lirc/lirc_it87.c b/drivers/staging/lirc/lirc_it87.c index 929ae579546..5938616f3e8 100644 --- a/drivers/staging/lirc/lirc_it87.c +++ b/drivers/staging/lirc/lirc_it87.c @@ -232,6 +232,7 @@ static ssize_t lirc_write(struct file *file, const char *buf, i++; } terminate_send(tx_buf[i - 1]); + kfree(tx_buf); return n; } diff --git a/drivers/staging/lirc/lirc_parallel.c b/drivers/staging/lirc/lirc_parallel.c index dfd2c447e67..3a9c09881b2 100644 --- a/drivers/staging/lirc/lirc_parallel.c +++ b/drivers/staging/lirc/lirc_parallel.c @@ -376,6 +376,7 @@ static ssize_t lirc_write(struct file *filep, const char *buf, size_t n, unsigned long flags; int counttimer; int *wbuf; + ssize_t ret; if (!is_claimed) return -EBUSY; @@ -393,8 +394,10 @@ static ssize_t lirc_write(struct file *filep, const char *buf, size_t n, if (timer == 0) { /* try again if device is ready */ timer = init_lirc_timer(); - if (timer == 0) - return -EIO; + if (timer == 0) { + ret = -EIO; + goto out; + } } /* adjust values from usecs */ @@ -420,7 +423,8 @@ static ssize_t lirc_write(struct file *filep, const char *buf, size_t n, if (check_pselecd && (in(1) & LP_PSELECD)) { lirc_off(); local_irq_restore(flags); - return -EIO; + ret = -EIO; + goto out; } } while (counttimer < wbuf[i]); i++; @@ -436,7 +440,8 @@ static ssize_t lirc_write(struct file *filep, const char *buf, size_t n, level = newlevel; if (check_pselecd && (in(1) & LP_PSELECD)) { local_irq_restore(flags); - return -EIO; + ret = -EIO; + goto out; } } while (counttimer < wbuf[i]); i++; @@ -445,7 +450,11 @@ static ssize_t lirc_write(struct file *filep, const char *buf, size_t n, #else /* place code that handles write without external timer here */ #endif - return n; + ret = n; +out: + kfree(wbuf); + + return ret; } static unsigned int lirc_poll(struct file *file, poll_table *wait) diff --git a/drivers/staging/lirc/lirc_sasem.c b/drivers/staging/lirc/lirc_sasem.c index 998485ebdbc..925eabe1485 100644 --- a/drivers/staging/lirc/lirc_sasem.c +++ b/drivers/staging/lirc/lirc_sasem.c @@ -448,6 +448,7 @@ static ssize_t vfd_write(struct file *file, const char *buf, exit: mutex_unlock(&context->ctx_lock); + kfree(data_buf); return (!retval) ? n_bytes : retval; } diff --git a/drivers/staging/lirc/lirc_serial.c b/drivers/staging/lirc/lirc_serial.c index 9bcf149c426..1c3099b388e 100644 --- a/drivers/staging/lirc/lirc_serial.c +++ b/drivers/staging/lirc/lirc_serial.c @@ -966,7 +966,7 @@ static ssize_t lirc_write(struct file *file, const char *buf, if (n % sizeof(int) || count % 2 == 0) return -EINVAL; wbuf = memdup_user(buf, n); - if (PTR_ERR(wbuf)) + if (IS_ERR(wbuf)) return PTR_ERR(wbuf); spin_lock_irqsave(&hardware[type].lock, flags); if (type == LIRC_IRDEO) { @@ -981,6 +981,7 @@ static ssize_t lirc_write(struct file *file, const char *buf, } off(); spin_unlock_irqrestore(&hardware[type].lock, flags); + kfree(wbuf); return n; } diff --git a/drivers/staging/lirc/lirc_sir.c b/drivers/staging/lirc/lirc_sir.c index c553ab62623..76be7b8c620 100644 --- a/drivers/staging/lirc/lirc_sir.c +++ b/drivers/staging/lirc/lirc_sir.c @@ -330,6 +330,7 @@ static ssize_t lirc_write(struct file *file, const char *buf, size_t n, /* enable receiver */ Ser2UTCR3 = UTCR3_RXE|UTCR3_RIE; #endif + kfree(tx_buf); return count; } -- cgit v1.2.3-70-g09d2