From 1d5e83aac54b64b71b225fd5cf2e82491ad145f6 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Tue, 10 Jul 2007 16:42:04 -0500 Subject: Fix Vitesse 824x PHY interrupt acking The Vitesse 824x PHY doesn't allow an interrupt to be cleared if the mask bit for that interrupt isn't set. This means that the PHY Lib's order of handling interrupts (disable, then clear) breaks on this PHY. However, clearing then disabling the interrupt opens up the code for a silly race condition. So rather than change the PHY Lib, we change the Vitesse driver so it always clears interrupts before disabling them. Further, the ack function only clears the interrupt if interrupts are enabled. Signed-off-by: Andy Fleming Signed-off-by: York Sun Acked-by: Haiying Wang --- drivers/net/phy/vitesse.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 596222b260d..f39ab76e6f6 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -65,7 +65,15 @@ static int vsc824x_config_init(struct phy_device *phydev) static int vsc824x_ack_interrupt(struct phy_device *phydev) { - int err = phy_read(phydev, MII_VSC8244_ISTAT); + int err = 0; + + /* + * Don't bother to ACK the interrupts if interrupts + * are disabled. The 824x cannot clear the interrupts + * if they are disabled. + */ + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + err = phy_read(phydev, MII_VSC8244_ISTAT); return (err < 0) ? err : 0; } @@ -77,8 +85,19 @@ static int vsc824x_config_intr(struct phy_device *phydev) if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, MII_VSC8244_IMASK, MII_VSC8244_IMASK_MASK); - else + else { + /* + * The Vitesse PHY cannot clear the interrupt + * once it has disabled them, so we clear them first + */ + err = phy_read(phydev, MII_VSC8244_ISTAT); + + if (err) + return err; + err = phy_write(phydev, MII_VSC8244_IMASK, 0); + } + return err; } -- cgit v1.2.3-70-g09d2