From 7dd06cdbd37c44a468117b0ffae0b54471268035 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Thu, 21 Feb 2008 16:18:43 +0800 Subject: [MAINTAINERS] use new kernel.org email for kernel development. Signed-off-by: Bryan Wu --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 36c7bc641db..8ef8c01460e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -767,14 +767,14 @@ S: Maintained BLACKFIN ARCHITECTURE P: Bryan Wu -M: bryan.wu@analog.com +M: cooloney@kernel.org L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org S: Supported BLACKFIN EMAC DRIVER P: Bryan Wu -M: bryan.wu@analog.com +M: cooloney@kernel.org L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org S: Supported -- cgit v1.2.3-70-g09d2 From 7aa475cfb7030f491d040333a343d8c414765f1a Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 22 Feb 2008 16:01:50 +0800 Subject: [Blackfin] arch: fix bug add missing header file Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf548/dma.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c index 374803a8d2e..f5479298bb7 100644 --- a/arch/blackfin/mach-bf548/dma.c +++ b/arch/blackfin/mach-bf548/dma.c @@ -27,6 +27,8 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include + #include #include -- cgit v1.2.3-70-g09d2 From 4d94bf674683b0560720bdea3b0c5d4716e1abec Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 22 Feb 2008 16:03:54 +0800 Subject: [Blackfin] arch: respect `make -s` when creating the asm/mach symlink Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index fe254f886a6..88ae549f7b2 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -98,8 +98,10 @@ drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/ # them changed. We use .mach to indicate when they were updated # last, otherwise make uses the target directory mtime. + quiet_show_mach_symlink = echo ' SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach' +silent_show_mach_symlink = : include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf - @echo ' SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach' + @$($(quiet)show_mach_symlink) ifneq ($(KBUILD_SRC),) $(Q)mkdir -p include/asm-$(ARCH) $(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach -- cgit v1.2.3-70-g09d2 From c63d4e64087aa6633c07964b5f028198c5bee762 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 22 Feb 2008 16:12:01 +0800 Subject: [Blackfin] arch: add handling for the mach symlink in the `make V=1` case Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 88ae549f7b2..75eba2ca788 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -98,6 +98,7 @@ drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/ # them changed. We use .mach to indicate when they were updated # last, otherwise make uses the target directory mtime. + show_mach_symlink = : quiet_show_mach_symlink = echo ' SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach' silent_show_mach_symlink = : include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf -- cgit v1.2.3-70-g09d2 From 8929ecf84df529338d258f0ad9c1e553dfc921bc Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 22 Feb 2008 16:35:20 +0800 Subject: [Blackfin] arch: add fixed code to the memory map output Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 8229b1090eb..febcbc527b4 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -514,6 +514,7 @@ static __init void memory_setup(void) printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20); printk(KERN_INFO "Memory map:\n" + KERN_INFO " fixedcode = 0x%p-0x%p\n" KERN_INFO " text = 0x%p-0x%p\n" KERN_INFO " rodata = 0x%p-0x%p\n" KERN_INFO " bss = 0x%p-0x%p\n" @@ -527,7 +528,8 @@ static __init void memory_setup(void) #if DMA_UNCACHED_REGION > 0 KERN_INFO " DMA Zone = 0x%p-0x%p\n" #endif - , _stext, _etext, + , (void *)FIXED_CODE_START, (void *)FIXED_CODE_END, + _stext, _etext, __start_rodata, __end_rodata, __bss_start, __bss_stop, _sdata, _edata, -- cgit v1.2.3-70-g09d2 From 32320ea0a63003a249773b5e3e459e66bb5fb8f8 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Fri, 22 Feb 2008 16:43:45 +0800 Subject: [Blackfin] arch: Update default config Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- arch/blackfin/configs/BF527-EZKIT_defconfig | 18 ++++++++---------- arch/blackfin/configs/BF533-EZKIT_defconfig | 6 ++---- arch/blackfin/configs/BF533-STAMP_defconfig | 6 ++---- arch/blackfin/configs/BF537-STAMP_defconfig | 6 +++--- arch/blackfin/configs/BF548-EZKIT_defconfig | 2 ++ arch/blackfin/configs/BF561-EZKIT_defconfig | 1 + 6 files changed, 18 insertions(+), 21 deletions(-) diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index d59ee1530bd..ae320dcfede 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -1,7 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.14 -# Thu Nov 29 17:32:47 2007 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -116,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set CONFIG_BF527=y # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -306,6 +308,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -354,6 +357,7 @@ CONFIG_BINFMT_ZFLAT=y # Power management options # # CONFIG_PM is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set # # Networking @@ -496,7 +500,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_INTELEXT is not set # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -506,9 +509,6 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_SIZE=0x400000 -CONFIG_EBIU_FLASH_BASE=0x20000000 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -684,7 +684,6 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_BF53X_PFBUTTONS is not set # CONFIG_TWI_KEYPAD is not set # @@ -702,12 +701,12 @@ CONFIG_INPUT_MISC=y # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set # CONFIG_AD5304 is not set -# CONFIG_BF5xx_TEA5764 is not set -# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -772,7 +771,6 @@ CONFIG_I2C_CHARDEV=m # # I2C Hardware Bus support # -# CONFIG_I2C_BLACKFIN_GPIO is not set CONFIG_I2C_BLACKFIN_TWI=m CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_GPIO is not set diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 811711f59a2..9621caa60b5 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -322,10 +322,9 @@ CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_PM_SYSFS_DEPRECATED is not set -CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y +CONFIG_PM_BFIN_SLEEP_DEEPER=y +# CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set -# CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x80 # # CPU Frequency scaling @@ -697,7 +696,6 @@ CONFIG_SERIAL_BFIN_DMA=y # CONFIG_SERIAL_BFIN_PIO is not set CONFIG_SERIAL_BFIN_UART0=y # CONFIG_BFIN_UART0_CTSRTS is not set -# CONFIG_SERIAL_BFIN_UART1 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 198f4123af4..b51e76ce7f4 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -323,10 +323,9 @@ CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_PM_SYSFS_DEPRECATED is not set -CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y +CONFIG_PM_BFIN_SLEEP_DEEPER=y +# CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set -# CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x80 # # CPU Frequency scaling @@ -714,7 +713,6 @@ CONFIG_SERIAL_BFIN_DMA=y # CONFIG_SERIAL_BFIN_PIO is not set CONFIG_SERIAL_BFIN_UART0=y # CONFIG_BFIN_UART0_CTSRTS is not set -# CONFIG_SERIAL_BFIN_UART1 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index b37ccc681e7..d45fa535dad 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -330,10 +330,9 @@ CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_PM_SYSFS_DEPRECATED is not set -CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y +CONFIG_PM_BFIN_SLEEP_DEEPER=y +# CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set -# CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x8 # # CPU Frequency scaling @@ -1013,6 +1012,7 @@ CONFIG_SND_BFIN_AD73311_SE=4 CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_SOC=m CONFIG_SND_BF5XX_SOC=m +CONFIG_SND_MMAP_SUPPORT=y CONFIG_SND_BF5XX_SOC_AC97=m # CONFIG_SND_BF5XX_SOC_WM8750 is not set # CONFIG_SND_BF5XX_SOC_WM8731 is not set diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index fd702161ef5..c9707f7665a 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -396,6 +396,7 @@ CONFIG_BINFMT_ZFLAT=y # Power management options # # CONFIG_PM is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set # # CPU Frequency scaling @@ -1075,6 +1076,7 @@ CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_SOC=y CONFIG_SND_BF5XX_SOC=y +CONFIG_SND_MMAP_SUPPORT=y CONFIG_SND_BF5XX_SOC_AC97=y CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y # CONFIG_SND_BF5XX_SOC_WM8750 is not set diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 8546994939f..4d8a6333130 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -367,6 +367,7 @@ CONFIG_BINFMT_ZFLAT=y # Power management options # # CONFIG_PM is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set # # Networking -- cgit v1.2.3-70-g09d2 From edf056417d11fe9321ec15a55bd128e4f4c73796 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 25 Feb 2008 11:38:11 +0800 Subject: [Blackfin] arch: fix bug - set right partition size in the board files - set default u-boot partition size to 256k - modify the offset with the size change - use mtd defines (append for offset and full for size) where applicable rather than churning constants when we dont have to Signed-off-by: Grace Pan Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf527/boards/ezkit.c | 10 +++++----- arch/blackfin/mach-bf533/boards/ezkit.c | 6 +++--- arch/blackfin/mach-bf533/boards/stamp.c | 10 +++++----- arch/blackfin/mach-bf537/boards/stamp.c | 12 ++++++------ arch/blackfin/mach-bf548/boards/ezkit.c | 10 +++++----- arch/blackfin/mach-bf561/boards/ezkit.c | 2 +- 6 files changed, 25 insertions(+), 25 deletions(-) diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 337515fba61..a28d5df20d7 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -180,8 +180,8 @@ static struct mtd_partition partition_info[] = { }, { .name = "File System", - .offset = 4 * SIZE_1M, - .size = (256 - 4) * SIZE_1M, + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, }, }; @@ -422,11 +422,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { }, { .name = "kernel", .size = 0xe0000, - .offset = 0x20000 + .offset = MTDPART_OFS_APPEND, }, { .name = "file system", - .size = 0x700000, - .offset = 0x00100000, + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, } }; diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 2b09aa39f56..73f76af73e9 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -99,11 +99,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { }, { .name = "kernel", .size = 0xe0000, - .offset = 0x20000 + .offset = MTDPART_OFS_APPEND, }, { .name = "file system", - .size = 0x700000, - .offset = 0x00100000, + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, } }; diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index a645f6fd091..324317a8910 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -112,7 +112,7 @@ static struct platform_device net2272_bfin_device = { static struct mtd_partition stamp_partitions[] = { { .name = "Bootloader", - .size = 0x20000, + .size = 0x40000, .offset = 0, }, { .name = "Kernel", @@ -160,17 +160,17 @@ static struct platform_device stamp_flash_device = { static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader", - .size = 0x00020000, + .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { .name = "kernel", .size = 0xe0000, - .offset = 0x20000 + .offset = MTDPART_OFS_APPEND, }, { .name = "file system", - .size = 0x700000, - .offset = 0x00100000, + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, } }; diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 9e2277e0d25..9c6fa70c406 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -343,7 +343,7 @@ static struct platform_device net2272_bfin_device = { static struct mtd_partition stamp_partitions[] = { { .name = "Bootloader", - .size = 0x20000, + .size = 0x40000, .offset = 0, }, { .name = "Kernel", @@ -351,7 +351,7 @@ static struct mtd_partition stamp_partitions[] = { .offset = MTDPART_OFS_APPEND, }, { .name = "RootFS", - .size = 0x400000 - 0x20000 - 0xE0000 - 0x10000, + .size = 0x400000 - 0x40000 - 0xE0000 - 0x10000, .offset = MTDPART_OFS_APPEND, }, { .name = "MAC Address", @@ -391,17 +391,17 @@ static struct platform_device stamp_flash_device = { static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader", - .size = 0x00020000, + .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { .name = "kernel", .size = 0xe0000, - .offset = 0x20000 + .offset = MTDPART_OFS_APPEND, }, { .name = "file system", - .size = 0x700000, - .offset = 0x00100000, + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, } }; diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 916e963e83b..47a4f5547cf 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -285,8 +285,8 @@ static struct mtd_partition partition_info[] = { }, { .name = "File System", - .offset = 4 * SIZE_1M, - .size = (256 - 4) * SIZE_1M, + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, }, }; @@ -333,7 +333,7 @@ static struct platform_device bf54x_sdh_device = { static struct mtd_partition ezkit_partitions[] = { { .name = "Bootloader", - .size = 0x20000, + .size = 0x40000, .offset = 0, }, { .name = "Kernel", @@ -381,8 +381,8 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { .mask_flags = MTD_CAP_ROM }, { .name = "linux kernel", - .size = 0x1c0000, - .offset = 0x40000 + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, } }; diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 43c1b098281..480b0a91a74 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -223,7 +223,7 @@ static struct platform_device bfin_uart_device = { static struct mtd_partition ezkit_partitions[] = { { .name = "Bootloader", - .size = 0x20000, + .size = 0x40000, .offset = 0, }, { .name = "Kernel", -- cgit v1.2.3-70-g09d2 From cad2ab65dd1c7d65153ffccd71c90db028fd62f0 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 22 Feb 2008 17:01:31 +0800 Subject: [Blackfin] arch: add board resources for new simple-gpio char driver Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf527/boards/ezkit.c | 15 +++++++++++++++ arch/blackfin/mach-bf533/boards/ezkit.c | 15 +++++++++++++++ arch/blackfin/mach-bf533/boards/stamp.c | 15 +++++++++++++++ arch/blackfin/mach-bf537/boards/stamp.c | 15 +++++++++++++++ arch/blackfin/mach-bf548/boards/ezkit.c | 15 +++++++++++++++ arch/blackfin/mach-bf561/boards/ezkit.c | 14 ++++++++++++++ 6 files changed, 89 insertions(+) diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index a28d5df20d7..770056b0e68 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -818,6 +818,19 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) &bf5xx_nand_device, @@ -895,6 +908,8 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif + + &bfin_gpios_device, }; static int __init stamp_init(void) diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 73f76af73e9..241b5a20a36 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -298,6 +298,19 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) #include @@ -350,6 +363,8 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) &i2c_gpio_device, #endif + + &bfin_gpios_device, }; static int __init ezkit_init(void) diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 324317a8910..c0f7d40fe12 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -457,6 +457,19 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) #include @@ -518,6 +531,8 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) &i2c_gpio_device, #endif + + &bfin_gpios_device, &stamp_flash_device, }; diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 9c6fa70c406..7a5629a0c37 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -128,6 +128,19 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) static struct resource bfin_pcmcia_cf_resources[] = { { @@ -821,6 +834,8 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif + + &bfin_gpios_device, &stamp_flash_device, }; diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 47a4f5547cf..a0950c1fd80 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -594,6 +594,19 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -646,6 +659,8 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif + + &bfin_gpios_device, &ezkit_flash_device, }; diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 480b0a91a74..d357f648d96 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -389,6 +389,19 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) #include @@ -446,6 +459,7 @@ static struct platform_device *ezkit_devices[] __initdata = { &isp1362_hcd_device, #endif + &bfin_gpios_device, &ezkit_flash_device, }; -- cgit v1.2.3-70-g09d2 From 549aaa8425b4a1de23cbddc650dac75b91204af6 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 25 Feb 2008 11:13:07 +0800 Subject: [Blackfin] arch: Fix bug - Setting peripheral_map only when dma channel is UART2/3. Singed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_dma_5xx.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 5453bc3664f..8fd5d22cec3 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -105,13 +105,14 @@ int request_dma(unsigned int channel, char *device_id) mutex_unlock(&(dma_ch[channel].dmalock)); #ifdef CONFIG_BF54x - if (channel >= CH_UART2_RX && channel <= CH_UART3_TX && - strncmp(device_id, "BFIN_UART", 9) == 0) - dma_ch[channel].regs->peripheral_map |= - (channel - CH_UART2_RX + 0xC); - else - dma_ch[channel].regs->peripheral_map |= - (channel - CH_UART2_RX + 0x6); + if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) { + if (strncmp(device_id, "BFIN_UART", 9) == 0) + dma_ch[channel].regs->peripheral_map |= + (channel - CH_UART2_RX + 0xC); + else + dma_ch[channel].regs->peripheral_map |= + (channel - CH_UART2_RX + 0x6); + } #endif dma_ch[channel].device_id = device_id; -- cgit v1.2.3-70-g09d2 From 181afa94989f431e93eccd784c14c37ccb395a00 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 25 Feb 2008 11:42:17 +0800 Subject: [Blackfin] arch: grab mac address from OTP on BF527-EZKIT The bf527-ezkit stores the mac address in OTP, so grab it from there rather than flash Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf527/boards/ezkit.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 770056b0e68..ab7a21faaa7 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -936,13 +936,18 @@ void native_machine_restart(char *cmd) bfin_gpio_reset_spi0_ssel1(); } -/* - * Currently the MAC address is saved in Flash by U-Boot - */ -#define FLASH_MAC 0x203f0000 void bfin_get_ether_addr(char *addr) { - *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC); - *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4); + /* the MAC is stored in OTP memory page 0xDF */ + u32 ret; + u64 otp_mac; + u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A; + + ret = otp_read(0xDF, 0x00, &otp_mac); + if (!(ret & 0x1)) { + char *otp_mac_p = (char *)&otp_mac; + for (ret = 0; ret < 6; ++ret) + addr[ret] = otp_mac_p[5 - ret]; + } } EXPORT_SYMBOL(bfin_get_ether_addr); -- cgit v1.2.3-70-g09d2 From fe9ec9b9698b95ad21617c1db21eb0d1c040b93d Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 25 Feb 2008 12:04:57 +0800 Subject: [Blackfin] arch: fix bug - Move IWR Enable All to the end of init_arch_irq otherwise it fails Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/ints-priority.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 880595afe98..b321c4a92a6 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -969,15 +969,11 @@ int __init init_arch_irq(void) #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) bfin_write_SIC_IMASK0(SIC_UNMASK_ALL); bfin_write_SIC_IMASK1(SIC_UNMASK_ALL); - bfin_write_SIC_IWR0(IWR_ENABLE_ALL); - bfin_write_SIC_IWR1(IWR_ENABLE_ALL); # ifdef CONFIG_BF54x bfin_write_SIC_IMASK2(SIC_UNMASK_ALL); - bfin_write_SIC_IWR2(IWR_ENABLE_ALL); # endif #else bfin_write_SIC_IMASK(SIC_UNMASK_ALL); - bfin_write_SIC_IWR(IWR_ENABLE_ALL); #endif SSYNC(); @@ -1106,6 +1102,16 @@ int __init init_arch_irq(void) IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) + bfin_write_SIC_IWR0(IWR_ENABLE_ALL); + bfin_write_SIC_IWR1(IWR_ENABLE_ALL); +# ifdef CONFIG_BF54x + bfin_write_SIC_IWR2(IWR_ENABLE_ALL); +# endif +#else + bfin_write_SIC_IWR(IWR_ENABLE_ALL); +#endif + return 0; } -- cgit v1.2.3-70-g09d2 From 0db5d105cd62055ea7a3b7ddf7b7408ba65a07b9 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 25 Feb 2008 12:19:57 +0800 Subject: [Blackfin] arch: punt the simple ad5304 spi driver now that the generic spidev driver lets you do it from userspace Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf527/boards/ezkit.c | 18 ------------------ arch/blackfin/mach-bf533/boards/stamp.c | 18 ------------------ arch/blackfin/mach-bf537/boards/generic_board.c | 18 ------------------ arch/blackfin/mach-bf537/boards/stamp.c | 18 ------------------ 4 files changed, 72 deletions(-) diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index ab7a21faaa7..cf4bc0d8335 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -484,13 +484,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { }; #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) -static struct bfin5xx_spi_chip ad5304_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { .enable_dma = 0, @@ -611,17 +604,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) - { - .modalias = "ad5304_spi", - .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 2, - .platform_data = NULL, - .controller_data = &ad5304_chip_info, - .mode = SPI_MODE_2, - }, -#endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) { .modalias = "ad7877", diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index c0f7d40fe12..b2ac4816ae6 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -212,13 +212,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { }; #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) -static struct bfin5xx_spi_chip ad5304_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) static struct bfin5xx_spi_chip spi_mmc_chip_info = { .enable_dma = 1, @@ -308,17 +301,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) - { - .modalias = "ad5304_spi", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 2, - .platform_data = NULL, - .controller_data = &ad5304_chip_info, - .mode = SPI_MODE_2, - }, -#endif #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) { .modalias = "spidev", diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 8a3397db1d2..c95395ba7bf 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -371,13 +371,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { }; #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) -static struct bfin5xx_spi_chip ad5304_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { .enable_dma = 0, @@ -483,17 +476,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) - { - .modalias = "ad5304_spi", - .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 2, - .platform_data = NULL, - .controller_data = &ad5304_chip_info, - .mode = SPI_MODE_2, - }, -#endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) { .modalias = "ad7877", diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 7a5629a0c37..ea83148993d 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -472,13 +472,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { }; #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) -static struct bfin5xx_spi_chip ad5304_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { .enable_dma = 0, @@ -591,17 +584,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) - { - .modalias = "ad5304_spi", - .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 2, - .platform_data = NULL, - .controller_data = &ad5304_chip_info, - .mode = SPI_MODE_2, - }, -#endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) { .modalias = "ad7877", -- cgit v1.2.3-70-g09d2 From d45118b14bf04e124e4d875b136d5c1c4df97d57 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 25 Feb 2008 12:24:44 +0800 Subject: [Blackfin] arch: make sure we export the _bfin_swrst symbol as modules (like the watchdog) need it Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index febcbc527b4..2255c289a71 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -32,6 +32,7 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices); u16 _bfin_swrst; +EXPORT_SYMBOL(_bfin_swrst); unsigned long memory_start, memory_end, physical_mem_end; unsigned long reserved_mem_dcache_on; -- cgit v1.2.3-70-g09d2 From ce3b7bb61c120e1e4e70e892ec281ef2bb81d6fa Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 25 Feb 2008 13:48:47 +0800 Subject: [Blackfin] arch: fix bug - linux-2.6.24 (delayed) disable IRQ feature not functional for handle_simple_irq Bypass delayed disable feature by implementing chip->disable and chip->enable. http://lkml.org/lkml/2008/2/19/115 Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/ints-priority.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index b321c4a92a6..22bcdef00e0 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -213,6 +213,9 @@ static struct irq_chip bfin_internal_irqchip = { .ack = ack_noop, .mask = bfin_internal_mask_irq, .unmask = bfin_internal_unmask_irq, + .mask_ack = bfin_internal_mask_irq, + .disable = bfin_internal_mask_irq, + .enable = bfin_internal_unmask_irq, #ifdef CONFIG_PM .set_wake = bfin_internal_set_wake, #endif -- cgit v1.2.3-70-g09d2 From 464abc5de6ea8f4af1c1246e0d1ea7b07362db43 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 25 Feb 2008 13:50:20 +0800 Subject: [Blackfin] arch: Cleanup abd Simplify: - Simplify init_arch_irq - Make code more readable - Remove useless SSYNCs - Fix comments Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/ints-priority.c | 157 ++++++++++-------------------- include/asm-blackfin/irq.h | 2 + 2 files changed, 53 insertions(+), 106 deletions(-) diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 22bcdef00e0..225ef14af75 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -74,7 +74,7 @@ unsigned long bfin_sic_iwr[3]; /* Up to 3 SIC_IWRx registers */ #endif struct ivgx { - /* irq number for request_irq, available in mach-bf533/irq.h */ + /* irq number for request_irq, available in mach-bf5xx/irq.h */ unsigned int irqno; /* corresponding bit in the SIC_ISR register */ unsigned int isrflag; @@ -86,7 +86,6 @@ struct ivg_slice { struct ivgx *istop; } ivg7_13[IVG13 - IVG7 + 1]; -static void search_IAR(void); /* * Search SIC_IAR and fill tables with the irqvalues @@ -120,10 +119,10 @@ static void __init search_IAR(void) } /* - * This is for BF533 internal IRQs + * This is for core internal IRQs */ -static void ack_noop(unsigned int irq) +static void bfin_ack_noop(unsigned int irq) { /* Dummy function. */ } @@ -156,11 +155,11 @@ static void bfin_internal_mask_irq(unsigned int irq) { #ifdef CONFIG_BF53x bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & - ~(1 << (irq - (IRQ_CORETMR + 1)))); + ~(1 << SIC_SYSIRQ(irq))); #else unsigned mask_bank, mask_bit; - mask_bank = (irq - (IRQ_CORETMR + 1)) / 32; - mask_bit = (irq - (IRQ_CORETMR + 1)) % 32; + mask_bank = SIC_SYSIRQ(irq) / 32; + mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) & ~(1 << mask_bit)); #endif @@ -171,11 +170,11 @@ static void bfin_internal_unmask_irq(unsigned int irq) { #ifdef CONFIG_BF53x bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | - (1 << (irq - (IRQ_CORETMR + 1)))); + (1 << SIC_SYSIRQ(irq))); #else unsigned mask_bank, mask_bit; - mask_bank = (irq - (IRQ_CORETMR + 1)) / 32; - mask_bit = (irq - (IRQ_CORETMR + 1)) % 32; + mask_bank = SIC_SYSIRQ(irq) / 32; + mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) | (1 << mask_bit)); #endif @@ -187,8 +186,8 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state) { unsigned bank, bit; unsigned long flags; - bank = (irq - (IRQ_CORETMR + 1)) / 32; - bit = (irq - (IRQ_CORETMR + 1)) % 32; + bank = SIC_SYSIRQ(irq) / 32; + bit = SIC_SYSIRQ(irq) % 32; local_irq_save(flags); @@ -204,13 +203,13 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state) #endif static struct irq_chip bfin_core_irqchip = { - .ack = ack_noop, + .ack = bfin_ack_noop, .mask = bfin_core_mask_irq, .unmask = bfin_core_unmask_irq, }; static struct irq_chip bfin_internal_irqchip = { - .ack = ack_noop, + .ack = bfin_ack_noop, .mask = bfin_internal_mask_irq, .unmask = bfin_internal_unmask_irq, .mask_ack = bfin_internal_mask_irq, @@ -224,38 +223,23 @@ static struct irq_chip bfin_internal_irqchip = { #ifdef BF537_GENERIC_ERROR_INT_DEMUX static int error_int_mask; -static void bfin_generic_error_ack_irq(unsigned int irq) -{ - -} - static void bfin_generic_error_mask_irq(unsigned int irq) { error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR)); - if (!error_int_mask) { - local_irq_disable(); - bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & - ~(1 << (IRQ_GENERIC_ERROR - - (IRQ_CORETMR + 1)))); - SSYNC(); - local_irq_enable(); - } + if (!error_int_mask) + bfin_internal_mask_irq(IRQ_GENERIC_ERROR); } static void bfin_generic_error_unmask_irq(unsigned int irq) { - local_irq_disable(); - bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | 1 << - (IRQ_GENERIC_ERROR - (IRQ_CORETMR + 1))); - SSYNC(); - local_irq_enable(); - + bfin_internal_unmask_irq(IRQ_GENERIC_ERROR); error_int_mask |= 1L << (irq - IRQ_PPI_ERROR); } static struct irq_chip bfin_generic_error_irqchip = { - .ack = bfin_generic_error_ack_irq, + .ack = bfin_ack_noop, + .mask_ack = bfin_generic_error_mask_irq, .mask = bfin_generic_error_mask_irq, .unmask = bfin_generic_error_unmask_irq, }; @@ -611,7 +595,7 @@ static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = { (struct pin_int_t *)PINT3_MASK_SET, }; -unsigned short get_irq_base(u8 bank, u8 bmap) +inline unsigned short get_irq_base(u8 bank, u8 bmap) { u16 irq_base; @@ -978,7 +962,6 @@ int __init init_arch_irq(void) #else bfin_write_SIC_IMASK(SIC_UNMASK_ALL); #endif - SSYNC(); local_irq_disable(); @@ -1000,90 +983,53 @@ int __init init_arch_irq(void) set_irq_chip(irq, &bfin_core_irqchip); else set_irq_chip(irq, &bfin_internal_irqchip); -#ifdef BF537_GENERIC_ERROR_INT_DEMUX - if (irq != IRQ_GENERIC_ERROR) { -#endif - switch (irq) { + switch (irq) { #if defined(CONFIG_BF53x) - case IRQ_PROG_INTA: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; + case IRQ_PROG_INTA: # if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) - case IRQ_MAC_RX: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; + case IRQ_MAC_RX: # endif #elif defined(CONFIG_BF54x) - case IRQ_PINT0: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; - case IRQ_PINT1: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; - case IRQ_PINT2: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; - case IRQ_PINT3: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; + case IRQ_PINT0: + case IRQ_PINT1: + case IRQ_PINT2: + case IRQ_PINT3: #elif defined(CONFIG_BF52x) - case IRQ_PORTF_INTA: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; - case IRQ_PORTG_INTA: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; - case IRQ_PORTH_INTA: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; + case IRQ_PORTF_INTA: + case IRQ_PORTG_INTA: + case IRQ_PORTH_INTA: #elif defined(CONFIG_BF561) - case IRQ_PROG0_INTA: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; - case IRQ_PROG1_INTA: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; - case IRQ_PROG2_INTA: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; + case IRQ_PROG0_INTA: + case IRQ_PROG1_INTA: + case IRQ_PROG2_INTA: #endif - default: - set_irq_handler(irq, handle_simple_irq); - break; - } - + set_irq_chained_handler(irq, + bfin_demux_gpio_irq); + break; #ifdef BF537_GENERIC_ERROR_INT_DEMUX - } else { + case IRQ_GENERIC_ERROR: set_irq_handler(irq, bfin_demux_error_irq); - } + + break; #endif + default: + set_irq_handler(irq, handle_simple_irq); + break; + } } + #ifdef BF537_GENERIC_ERROR_INT_DEMUX - for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) { - set_irq_chip(irq, &bfin_generic_error_irqchip); - set_irq_handler(irq, handle_level_irq); - } + for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) + set_irq_chip_and_handler(irq, &bfin_generic_error_irqchip, + handle_level_irq); #endif - for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++) { + /* if configured as edge, then will be changed to do_edge_IRQ */ + for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++) + set_irq_chip_and_handler(irq, &bfin_gpio_irqchip, + handle_level_irq); - set_irq_chip(irq, &bfin_gpio_irqchip); - /* if configured as edge, then will be changed to do_edge_IRQ */ - set_irq_handler(irq, handle_level_irq); - } bfin_write_IMASK(0); CSYNC(); @@ -1131,7 +1077,6 @@ void do_irq(int vec, struct pt_regs *fp) #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) unsigned long sic_status[3]; - SSYNC(); sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0(); sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1(); #ifdef CONFIG_BF54x @@ -1147,7 +1092,7 @@ void do_irq(int vec, struct pt_regs *fp) } #else unsigned long sic_status; - SSYNC(); + sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR(); for (;; ivg++) { diff --git a/include/asm-blackfin/irq.h b/include/asm-blackfin/irq.h index 65480dab244..86b67834354 100644 --- a/include/asm-blackfin/irq.h +++ b/include/asm-blackfin/irq.h @@ -67,4 +67,6 @@ static __inline__ int irq_canonicalize(int irq) #define NO_IRQ ((unsigned int)(-1)) #endif +#define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1)) + #endif /* _BFIN_IRQ_H_ */ -- cgit v1.2.3-70-g09d2 From 9253d02041c60d732713c40c59b49fbde8f3bc1c Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 25 Feb 2008 14:27:28 +0800 Subject: [Blackfin] arch: Remove DPMC char driver option Remove redundant/obsolete/dead code from DPMC driver Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/dpmc.S | 131 --------------------------------------- 1 file changed, 131 deletions(-) diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S index b80ddd8b232..fc9f6eb9018 100644 --- a/arch/blackfin/mach-common/dpmc.S +++ b/arch/blackfin/mach-common/dpmc.S @@ -33,137 +33,6 @@ .text -ENTRY(_unmask_wdog_wakeup_evt) - [--SP] = ( R7:0, P5:0 ); -#if defined(CONFIG_BF561) - P0.H = hi(SICA_IWR1); - P0.L = lo(SICA_IWR1); -#elif defined(CONFIG_BF54x) || defined(CONFIG_BF52x) - P0.h = HI(SIC_IWR0); - P0.l = LO(SIC_IWR0); -#else - P0.h = HI(SIC_IWR); - P0.l = LO(SIC_IWR); -#endif - R7 = [P0]; -#if defined(CONFIG_BF561) - BITSET(R7, 27); -#else - BITSET(R7,(IRQ_WATCH - IVG7)); -#endif - [P0] = R7; - SSYNC; - - ( R7:0, P5:0 ) = [SP++]; - RTS; - -.LWRITE_TO_STAT: - /* When watch dog timer is enabled, a write to STAT will load the - * contents of CNT to STAT - */ - R7 = 0x0000(z); -#if defined(CONFIG_BF561) - P0.h = HI(WDOGA_STAT); - P0.l = LO(WDOGA_STAT); -#else - P0.h = HI(WDOG_STAT); - P0.l = LO(WDOG_STAT); -#endif - [P0] = R7; - SSYNC; - JUMP .LSKIP_WRITE_TO_STAT; - -ENTRY(_program_wdog_timer) - [--SP] = ( R7:0, P5:0 ); -#if defined(CONFIG_BF561) - P0.h = HI(WDOGA_CNT); - P0.l = LO(WDOGA_CNT); -#else - P0.h = HI(WDOG_CNT); - P0.l = LO(WDOG_CNT); -#endif - [P0] = R0; - SSYNC; - -#if defined(CONFIG_BF561) - P0.h = HI(WDOGA_CTL); - P0.l = LO(WDOGA_CTL); -#else - P0.h = HI(WDOG_CTL); - P0.l = LO(WDOG_CTL); -#endif - R7 = W[P0](Z); - CC = BITTST(R7,1); - if !CC JUMP .LWRITE_TO_STAT; - CC = BITTST(R7,2); - if !CC JUMP .LWRITE_TO_STAT; - -.LSKIP_WRITE_TO_STAT: -#if defined(CONFIG_BF561) - P0.h = HI(WDOGA_CTL); - P0.l = LO(WDOGA_CTL); -#else - P0.h = HI(WDOG_CTL); - P0.l = LO(WDOG_CTL); -#endif - R7 = W[P0](Z); - BITCLR(R7,1); /* Enable GP event */ - BITSET(R7,2); - W[P0] = R7.L; - SSYNC; - NOP; - - R7 = W[P0](Z); - BITCLR(R7,4); /* Enable the wdog counter */ - W[P0] = R7.L; - SSYNC; - - ( R7:0, P5:0 ) = [SP++]; - RTS; - -ENTRY(_clear_wdog_wakeup_evt) - [--SP] = ( R7:0, P5:0 ); - -#if defined(CONFIG_BF561) - P0.h = HI(WDOGA_CTL); - P0.l = LO(WDOGA_CTL); -#else - P0.h = HI(WDOG_CTL); - P0.l = LO(WDOG_CTL); -#endif - R7 = 0x0AD6(Z); - W[P0] = R7.L; - SSYNC; - - R7 = W[P0](Z); - BITSET(R7,15); - W[P0] = R7.L; - SSYNC; - - R7 = W[P0](Z); - BITSET(R7,1); - BITSET(R7,2); - W[P0] = R7.L; - SSYNC; - - ( R7:0, P5:0 ) = [SP++]; - RTS; - -ENTRY(_disable_wdog_timer) - [--SP] = ( R7:0, P5:0 ); -#if defined(CONFIG_BF561) - P0.h = HI(WDOGA_CTL); - P0.l = LO(WDOGA_CTL); -#else - P0.h = HI(WDOG_CTL); - P0.l = LO(WDOG_CTL); -#endif - R7 = 0xAD6(Z); - W[P0] = R7.L; - SSYNC; - ( R7:0, P5:0 ) = [SP++]; - RTS; - #if !defined(CONFIG_BF561) .section .l1.text -- cgit v1.2.3-70-g09d2 From 3927819d511f5b5855e6f2345f24e7b04e4fd2f5 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 25 Feb 2008 14:39:50 +0800 Subject: [Blackfin] arch: Fix CONFIG_PM support for BF561 Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/dpmc.S | 6 ++---- include/asm-blackfin/mach-bf561/blackfin.h | 3 ++- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S index fc9f6eb9018..9d45aa3265b 100644 --- a/arch/blackfin/mach-common/dpmc.S +++ b/arch/blackfin/mach-common/dpmc.S @@ -31,9 +31,6 @@ #include #include -.text - -#if !defined(CONFIG_BF561) .section .l1.text @@ -328,10 +325,12 @@ ENTRY(_set_sic_iwr) RTS; ENTRY(_set_rtc_istat) +#ifndef CONFIG_BF561 P0.H = hi(RTC_ISTAT); P0.L = lo(RTC_ISTAT); w[P0] = R0.L; SSYNC; +#endif RTS; ENTRY(_test_pll_locked) @@ -342,4 +341,3 @@ ENTRY(_test_pll_locked) CC = BITTST(R0,5); IF !CC JUMP 1b; RTS; -#endif diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/include/asm-blackfin/mach-bf561/blackfin.h index 362617f9384..3a16df2c86d 100644 --- a/include/asm-blackfin/mach-bf561/blackfin.h +++ b/include/asm-blackfin/mach-bf561/blackfin.h @@ -49,7 +49,8 @@ #define bfin_read_FIO_INEN() bfin_read_FIO0_INEN() #define bfin_write_FIO_INEN(val) bfin_write_FIO0_INEN(val) - +#define SIC_IWR0 SICA_IWR0 +#define SIC_IWR1 SICA_IWR1 #define SIC_IAR0 SICA_IAR0 #define bfin_write_SIC_IMASK0 bfin_write_SICA_IMASK0 #define bfin_write_SIC_IMASK1 bfin_write_SICA_IMASK1 -- cgit v1.2.3-70-g09d2 From fee40119a2b2abbe239438b74052854db6f3444d Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 25 Feb 2008 15:06:07 +0800 Subject: [Blackfin] arch: make sure we have proper description/copyright/license lines Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/gptimers.c | 8 ++++---- include/asm-blackfin/gptimers.h | 7 +++---- 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c index 5cf4bdb1df3..1904d8b5332 100644 --- a/arch/blackfin/kernel/gptimers.c +++ b/arch/blackfin/kernel/gptimers.c @@ -1,9 +1,9 @@ /* - * bfin_gptimers.c - derived from bf53x_timers.c - * Driver for General Purpose Timer functions on the Blackfin processor + * gptimers.c - Blackfin General Purpose Timer core API * - * Copyright (C) 2005 John DeHority - * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de) + * Copyright (c) 2005-2008 Analog Devices Inc. + * Copyright (C) 2005 John DeHority + * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de) * * Licensed under the GPLv2. */ diff --git a/include/asm-blackfin/gptimers.h b/include/asm-blackfin/gptimers.h index 8265ea473d5..4f318f1fd2d 100644 --- a/include/asm-blackfin/gptimers.h +++ b/include/asm-blackfin/gptimers.h @@ -1,12 +1,11 @@ /* - * include/asm/bf5xx_timers.h - * - * This file contains the major Data structures and constants - * used for General Purpose Timer Implementation in BF5xx + * gptimers.h - Blackfin General Purpose Timer structs/defines/prototypes * + * Copyright (c) 2005-2008 Analog Devices Inc. * Copyright (C) 2005 John DeHority * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de) * + * Licensed under the GPL-2. */ #ifndef _BLACKFIN_TIMERS_H_ -- cgit v1.2.3-70-g09d2 From 40edad3efadb3aa486c7a5452401c4de10902496 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 25 Feb 2008 15:23:30 +0800 Subject: [Blackfin] arch: add bfin_clear_PPIx_STATUS() helper funcs like we have for other parts Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- include/asm-blackfin/mach-bf561/cdefBF561.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/include/asm-blackfin/mach-bf561/cdefBF561.h index d667816486c..1bc8d2f89cc 100644 --- a/include/asm-blackfin/mach-bf561/cdefBF561.h +++ b/include/asm-blackfin/mach-bf561/cdefBF561.h @@ -559,6 +559,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_write_PPI0_CONTROL(val) bfin_write16(PPI0_CONTROL,val) #define bfin_read_PPI0_STATUS() bfin_read16(PPI0_STATUS) #define bfin_write_PPI0_STATUS(val) bfin_write16(PPI0_STATUS,val) +#define bfin_clear_PPI0_STATUS() bfin_read_PPI0_STATUS() #define bfin_read_PPI0_COUNT() bfin_read16(PPI0_COUNT) #define bfin_write_PPI0_COUNT(val) bfin_write16(PPI0_COUNT,val) #define bfin_read_PPI0_DELAY() bfin_read16(PPI0_DELAY) @@ -570,6 +571,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_write_PPI1_CONTROL(val) bfin_write16(PPI1_CONTROL,val) #define bfin_read_PPI1_STATUS() bfin_read16(PPI1_STATUS) #define bfin_write_PPI1_STATUS(val) bfin_write16(PPI1_STATUS,val) +#define bfin_clear_PPI1_STATUS() bfin_read_PPI1_STATUS() #define bfin_read_PPI1_COUNT() bfin_read16(PPI1_COUNT) #define bfin_write_PPI1_COUNT(val) bfin_write16(PPI1_COUNT,val) #define bfin_read_PPI1_DELAY() bfin_read16(PPI1_DELAY) -- cgit v1.2.3-70-g09d2 From 8b07a2a1e58beb60c4a40a46251f053d64e1eb36 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 29 Feb 2008 11:57:35 +0800 Subject: [Blackfin] arch: handle the most common L1 shrinkage case (L1 does not exist for a part) so that any parts labeled for L1 instead get placed into external memory sections Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/vmlinux.lds.S | 34 +++++++++++++++++++++++++++------- 1 file changed, 27 insertions(+), 7 deletions(-) diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index aed832540b3..cb01a9de268 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -147,44 +147,64 @@ SECTIONS __l1_lma_start = .; +#if L1_CODE_LENGTH +# define LDS_L1_CODE *(.l1.text) +#else +# define LDS_L1_CODE +#endif .text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs)) { . = ALIGN(4); __stext_l1 = .; - *(.l1.text) - + LDS_L1_CODE . = ALIGN(4); __etext_l1 = .; } +#if L1_DATA_A_LENGTH +# define LDS_L1_A_DATA *(.l1.data) +# define LDS_L1_A_BSS *(.l1.bss) +# define LDS_L1_A_CACHE *(.data_l1.cacheline_aligned) +#else +# define LDS_L1_A_DATA +# define LDS_L1_A_BSS +# define LDS_L1_A_CACHE +#endif .data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1)) { . = ALIGN(4); __sdata_l1 = .; - *(.l1.data) + LDS_L1_A_DATA __edata_l1 = .; . = ALIGN(4); __sbss_l1 = .; - *(.l1.bss) + LDS_L1_A_BSS . = ALIGN(32); - *(.data_l1.cacheline_aligned) + LDS_L1_A_CACHE . = ALIGN(4); __ebss_l1 = .; } +#if L1_DATA_B_LENGTH +# define LDS_L1_B_DATA *(.l1.data.B) +# define LDS_L1_B_BSS *(.l1.bss.B) +#else +# define LDS_L1_B_DATA +# define LDS_L1_B_BSS +#endif .data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1)) { . = ALIGN(4); __sdata_b_l1 = .; - *(.l1.data.B) + LDS_L1_B_DATA __edata_b_l1 = .; . = ALIGN(4); __sbss_b_l1 = .; - *(.l1.bss.B) + LDS_L1_B_BSS . = ALIGN(4); __ebss_b_l1 = .; -- cgit v1.2.3-70-g09d2 From c051489df8b027238ff22d64d4e01ede3ad77dd5 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Fri, 29 Feb 2008 12:02:10 +0800 Subject: [Blackfin] arch: kill section mismatch warnings Signed-off-by: Bryan Wu --- arch/blackfin/mach-bf548/head.S | 9 +++++++-- arch/blackfin/mm/init.c | 4 ++-- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 74fe258421a..46222a75321 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -28,6 +28,7 @@ */ #include +#include #include #include #if CONFIG_BFIN_KERNEL_CLOCK @@ -44,10 +45,9 @@ #define INITIAL_STACK 0xFFB01000 -.text +__INIT ENTRY(__start) -ENTRY(__stext) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; /* Enable Cycle Counter and Nesting Of Interrupts */ @@ -213,6 +213,7 @@ ENTRY(__stext) .LWAIT_HERE: jump .LWAIT_HERE; +ENDPROC(__start) ENTRY(_real_start) [ -- sp ] = reti; @@ -285,6 +286,9 @@ ENTRY(_real_start) call _start_kernel; .L_exit: jump.s .L_exit; +ENDPROC(_real_start) + +__FINIT .section .l1.text #if CONFIG_BFIN_KERNEL_CLOCK @@ -450,6 +454,7 @@ ENTRY(_start_dma_code) SSYNC; RTS; +ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ .data diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index 1f516c55bde..ec3141fefd2 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -181,7 +181,7 @@ void __init mem_init(void) } } -static __init void free_init_pages(const char *what, unsigned long begin, unsigned long end) +static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end) { unsigned long addr; /* next to check that the page we free is not a partial page */ @@ -203,7 +203,7 @@ void __init free_initrd_mem(unsigned long start, unsigned long end) } #endif -void __init free_initmem(void) +void __init_refok free_initmem(void) { #if defined CONFIG_RAMKERNEL && !defined CONFIG_MPU free_init_pages("unused kernel memory", -- cgit v1.2.3-70-g09d2 From 759eb040901af60d8a1a2b59b93805521b156cbb Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Wed, 21 Nov 2007 17:00:32 +0800 Subject: Blackfin Serial driver: Fix bug - serial driver in PIO mode cant handle input very quickly Output as many bytes as possible in PIO tx handler. This reduce the number of tx interrupts and shorten the delay to handle rx interrupt. So, rx overrun disappears. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 62 +++++++++++------------------------------------ 1 file changed, 14 insertions(+), 48 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index ac2a3ef28d5..e059475c91a 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -74,7 +74,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); #else static void bfin_serial_do_work(struct work_struct *work); static void bfin_serial_tx_chars(struct bfin_serial_port *uart); -static void local_put_char(struct bfin_serial_port *uart, char ch); #endif static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); @@ -85,6 +84,9 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); static void bfin_serial_stop_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; +#ifndef CONFIG_BF54x + unsigned short ier; +#endif while (!(UART_GET_LSR(uart) & TEMT)) continue; @@ -100,8 +102,6 @@ static void bfin_serial_stop_tx(struct uart_port *port) UART_PUT_LSR(uart, TFI); UART_CLEAR_IER(uart, ETBEI); #else - unsigned short ier; - ier = UART_GET_IER(uart); ier &= ~ETBEI; UART_PUT_IER(uart, ier); @@ -210,23 +210,6 @@ int kgdb_get_debug_char(void) #endif #ifdef CONFIG_SERIAL_BFIN_PIO -static void local_put_char(struct bfin_serial_port *uart, char ch) -{ - unsigned short status; - int flags = 0; - - spin_lock_irqsave(&uart->port.lock, flags); - - do { - status = UART_GET_LSR(uart); - } while (!(status & THRE)); - - UART_PUT_CHAR(uart, ch); - SSYNC(); - - spin_unlock_irqrestore(&uart->port.lock, flags); -} - static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { struct tty_struct *tty = uart->port.info->tty; @@ -236,8 +219,8 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) struct pt_regs *regs = get_irq_regs(); #endif - status = UART_GET_LSR(uart); ch = UART_GET_CHAR(uart); + status = UART_GET_LSR(uart); uart->port.icount.rx++; #ifdef CONFIG_KGDB_UART @@ -337,9 +320,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) return; } - local_put_char(uart, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx++; + while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { + UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx++; + SSYNC(); + } if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uart->port); @@ -352,21 +338,11 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; -#ifdef CONFIG_BF54x - unsigned short status; spin_lock(&uart->port.lock); - status = UART_GET_LSR(uart); - while ((UART_GET_IER(uart) & ERBFI) && (status & DR)) { + while ((UART_GET_IER(uart) & ERBFI) && (UART_GET_LSR(uart) & DR)) bfin_serial_rx_chars(uart); - status = UART_GET_LSR(uart); - } spin_unlock(&uart->port.lock); -#else - spin_lock(&uart->port.lock); - while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_RX_READY) - bfin_serial_rx_chars(uart); - spin_unlock(&uart->port.lock); -#endif + return IRQ_HANDLED; } @@ -374,21 +350,11 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; -#ifdef CONFIG_BF54x - unsigned short status; spin_lock(&uart->port.lock); - status = UART_GET_LSR(uart); - while ((UART_GET_IER(uart) & ETBEI) && (status & THRE)) { + if ((UART_GET_IER(uart) & ETBEI) && (UART_GET_LSR(uart) & THRE)) bfin_serial_tx_chars(uart); - status = UART_GET_LSR(uart); - } spin_unlock(&uart->port.lock); -#else - spin_lock(&uart->port.lock); - while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY) - bfin_serial_tx_chars(uart); - spin_unlock(&uart->port.lock); -#endif + return IRQ_HANDLED; } -- cgit v1.2.3-70-g09d2 From 1b73351c6afcc3acbf9e29a43ee14b3c9a386503 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Fri, 21 Dec 2007 16:45:12 +0800 Subject: [Blackfin] serial driver: Clean up UART DMA code. Start next TX DMA in tx dma handler instead of rx timer handler. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index e059475c91a..3a2aa7e277f 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -84,7 +84,7 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); static void bfin_serial_stop_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -#ifndef CONFIG_BF54x +#if !defined(CONFIG_BF54x) && !defined(CONFIG_SERIAL_BFIN_DMA) unsigned short ier; #endif @@ -307,7 +307,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) UART_PUT_CHAR(uart, uart->port.x_char); uart->port.icount.tx++; uart->port.x_char = 0; - return; } /* * Check the modem control lines before @@ -376,28 +375,26 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) if (!uart->tx_done) return; - uart->tx_done = 0; + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { + bfin_serial_stop_tx(&uart->port); + uart->tx_done = 1; + return; + } + if (uart->port.x_char) { UART_PUT_CHAR(uart, uart->port.x_char); uart->port.icount.tx++; uart->port.x_char = 0; - uart->tx_done = 1; - return; } + /* * Check the modem control lines before * transmitting anything. */ bfin_serial_mctrl_check(uart); - if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { - bfin_serial_stop_tx(&uart->port); - uart->tx_done = 1; - return; - } - spin_lock_irqsave(&uart->port.lock, flags); uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) @@ -471,8 +468,6 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) int x_pos, pos; int flags = 0; - bfin_serial_dma_tx_chars(uart); - spin_lock_irqsave(&uart->port.lock, flags); x_pos = DMA_RX_XCOUNT - get_dma_curr_xcount(uart->rx_dma_channel); if (x_pos == DMA_RX_XCOUNT) @@ -513,9 +508,9 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uart->port); - if (uart_circ_empty(xmit)) - bfin_serial_stop_tx(&uart->port); uart->tx_done = 1; + + bfin_serial_dma_tx_chars(uart); } spin_unlock(&uart->port.lock); -- cgit v1.2.3-70-g09d2 From 75b780bd99b851682289e7a88763ede5a936edb0 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Fri, 21 Dec 2007 17:03:39 +0800 Subject: [Blackfin] serial driver: Fix bug Free rx dma buffer in shutdown. Kernel crash for the serial driver in DMA mode: http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3679 Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 3a2aa7e277f..838f491c8de 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -704,6 +704,7 @@ static void bfin_serial_shutdown(struct uart_port *port) disable_dma(uart->rx_dma_channel); free_dma(uart->rx_dma_channel); del_timer(&(uart->rx_dma_timer)); + dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0); #else #ifdef CONFIG_KGDB_UART if (uart->port.line != CONFIG_KGDB_UART_PORT) -- cgit v1.2.3-70-g09d2 From 99ee7b5f3a68324807650f650f2613bbe281627f Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Fri, 21 Dec 2007 17:12:55 +0800 Subject: [Blackfin] serial driver: Fix bug serial driver in DMA mode spams history to console on shell restart http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=2920 Fix by increasing buffer tail immediately before starting tx dma. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 838f491c8de..007414639e3 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -411,6 +411,10 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) set_dma_x_count(uart->tx_dma_channel, uart->tx_count); set_dma_x_modify(uart->tx_dma_channel, 1); enable_dma(uart->tx_dma_channel); + + xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx += uart->tx_count; + #ifdef CONFIG_BF54x UART_SET_IER(uart, ETBEI); #else @@ -502,9 +506,6 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) ier &= ~ETBEI; UART_PUT_IER(uart, ier); #endif - xmit->tail = (xmit->tail+uart->tx_count) &(UART_XMIT_SIZE -1); - uart->port.icount.tx+=uart->tx_count; - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uart->port); -- cgit v1.2.3-70-g09d2 From 4c195ad88b7df54b2e7340dec3446aee6ca84cd1 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Sun, 23 Dec 2007 23:18:08 +0800 Subject: [Blackfin] serial driver: fix bug - should not wait for the TFI bit, just clear it when tx stop. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 007414639e3..ca9ceaa113a 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -95,9 +95,6 @@ static void bfin_serial_stop_tx(struct uart_port *port) disable_dma(uart->tx_dma_channel); #else #ifdef CONFIG_BF54x - /* Waiting for Transmission Finished */ - while (!(UART_GET_LSR(uart) & TFI)) - continue; /* Clear TFI bit */ UART_PUT_LSR(uart, TFI); UART_CLEAR_IER(uart, ETBEI); -- cgit v1.2.3-70-g09d2 From 0bcfd70ea11a5d6f2362be463513a60245a62baf Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 24 Dec 2007 19:40:05 +0800 Subject: [Blackfin] serial driver: fix bug - cache the bits of the LSR on systems where the LSR is read-to-clear Cache the bits of the LSR on systems where the LSR is read-to-clear so that we can safely read the LSR in random places. this fixes older parts where break/framing/parity/overflow was not being detected at all in PIO mode, and this fixes newer parts where break/framing/parity/overflow was being reported all the time without being cleared. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 10 +++++++--- include/asm-blackfin/mach-bf527/bfin_serial_5xx.h | 19 ++++++++++++++++++- include/asm-blackfin/mach-bf533/bfin_serial_5xx.h | 19 ++++++++++++++++++- include/asm-blackfin/mach-bf537/bfin_serial_5xx.h | 19 ++++++++++++++++++- include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 1 + include/asm-blackfin/mach-bf561/bfin_serial_5xx.h | 19 ++++++++++++++++++- 6 files changed, 80 insertions(+), 7 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index ca9ceaa113a..af84984df77 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -216,8 +216,10 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) struct pt_regs *regs = get_irq_regs(); #endif - ch = UART_GET_CHAR(uart); status = UART_GET_LSR(uart); + UART_CLEAR_LSR(uart); + + ch = UART_GET_CHAR(uart); uart->port.icount.rx++; #ifdef CONFIG_KGDB_UART @@ -335,7 +337,7 @@ static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) struct bfin_serial_port *uart = dev_id; spin_lock(&uart->port.lock); - while ((UART_GET_IER(uart) & ERBFI) && (UART_GET_LSR(uart) & DR)) + while (UART_GET_LSR(uart) & DR) bfin_serial_rx_chars(uart); spin_unlock(&uart->port.lock); @@ -347,7 +349,7 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) struct bfin_serial_port *uart = dev_id; spin_lock(&uart->port.lock); - if ((UART_GET_IER(uart) & ETBEI) && (UART_GET_LSR(uart) & THRE)) + if (UART_GET_LSR(uart) & THRE) bfin_serial_tx_chars(uart); spin_unlock(&uart->port.lock); @@ -428,6 +430,8 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) int i, flg, status; status = UART_GET_LSR(uart); + UART_CLEAR_LSR(uart); + uart->port.icount.rx += CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, UART_XMIT_SIZE);; if (status & BI) { diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index 15dbc21eed8..233c585efc1 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -23,7 +23,6 @@ #define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) #define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) #define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) -#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) #define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) #define UART_PUT_CHAR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_THR), v) @@ -58,6 +57,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; int tx_count; @@ -76,6 +76,23 @@ struct bfin_serial_port { #endif }; +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + struct bfin_serial_port bfin_serial_ports[NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index 7871d4313f4..b619065ceeb 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -23,7 +23,6 @@ #define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) #define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) #define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) -#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) #define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) @@ -46,6 +45,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; int tx_count; @@ -64,6 +64,23 @@ struct bfin_serial_port { #endif }; +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + struct bfin_serial_port bfin_serial_ports[NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index 86e45c37983..f18c517cc93 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -23,7 +23,6 @@ #define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) #define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) #define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) -#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) #define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) @@ -58,6 +57,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; int tx_count; @@ -76,6 +76,23 @@ struct bfin_serial_port { #endif }; +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + struct bfin_serial_port bfin_serial_ports[NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 3770aa38ee9..8733d47747e 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -32,6 +32,7 @@ #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) #define UART_PUT_LSR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LSR),v) #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) +#define UART_CLEAR_LSR(uart) bfin_write16(((uart)->port.membase + OFFSET_LSR), -1) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index 7871d4313f4..b619065ceeb 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -23,7 +23,6 @@ #define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) #define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) #define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) -#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) #define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) @@ -46,6 +45,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; int tx_count; @@ -64,6 +64,23 @@ struct bfin_serial_port { #endif }; +/* The hardware clears the LSR bits upon read, so we need to cache + * some of the more fun bits in software so they don't get lost + * when checking the LSR in other code paths (TX). + */ +static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) +{ + unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); + uart->lsr |= (lsr & (BI|FE|PE|OE)); + return lsr | uart->lsr; +} + +static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) +{ + uart->lsr = 0; + bfin_write16(uart->port.membase + OFFSET_LSR, -1); +} + struct bfin_serial_port bfin_serial_ports[NR_PORTS]; struct bfin_serial_res { unsigned long uart_base_addr; -- cgit v1.2.3-70-g09d2 From 8851c71eb97610f0f63121d62345c969f71201a2 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 24 Dec 2007 19:48:04 +0800 Subject: [Blackfin] serial driver: rework break flood anomaly handling to be more robust/realistic about what we can actually work around Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 66 ++++++++++++++++++----- include/asm-blackfin/mach-bf533/bfin_serial_5xx.h | 3 ++ include/asm-blackfin/mach-bf561/bfin_serial_5xx.h | 3 ++ 3 files changed, 58 insertions(+), 14 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index af84984df77..50aa3b2a19b 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -206,12 +206,20 @@ int kgdb_get_debug_char(void) } #endif +#if ANOMALY_05000230 && defined(CONFIG_SERIAL_BFIN_PIO) +# define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold) +# define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v)) +#else +# define UART_GET_ANOMALY_THRESHOLD(uart) 0 +# define UART_SET_ANOMALY_THRESHOLD(uart, v) +#endif + #ifdef CONFIG_SERIAL_BFIN_PIO static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { struct tty_struct *tty = uart->port.info->tty; unsigned int status, ch, flg; - static int in_break = 0; + static struct timeval anomaly_start = { .tv_sec = 0 }; #ifdef CONFIG_KGDB_UART struct pt_regs *regs = get_irq_regs(); #endif @@ -244,28 +252,56 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) #endif if (ANOMALY_05000230) { - /* The BF533 family of processors have a nice misbehavior where - * they continuously generate characters for a "single" break. + /* The BF533 (and BF561) family of processors have a nice anomaly + * where they continuously generate characters for a "single" break. * We have to basically ignore this flood until the "next" valid - * character comes across. All other Blackfin families operate - * properly though. + * character comes across. Due to the nature of the flood, it is + * not possible to reliably catch bytes that are sent too quickly + * after this break. So application code talking to the Blackfin + * which sends a break signal must allow at least 1.5 character + * times after the end of the break for things to stabilize. This + * timeout was picked as it must absolutely be larger than 1 + * character time +/- some percent. So 1.5 sounds good. All other + * Blackfin families operate properly. Woo. * Note: While Anomaly 05000230 does not directly address this, * the changes that went in for it also fixed this issue. + * That anomaly was fixed in 0.5+ silicon. I like bunnies. */ - if (in_break) { - if (ch != 0) { - in_break = 0; - ch = UART_GET_CHAR(uart); - if (bfin_revid() < 5) - return; - } else - return; + if (anomaly_start.tv_sec) { + struct timeval curr; + suseconds_t usecs; + + if ((~ch & (~ch + 1)) & 0xff) + goto known_good_char; + + do_gettimeofday(&curr); + if (curr.tv_sec - anomaly_start.tv_sec > 1) + goto known_good_char; + + usecs = 0; + if (curr.tv_sec != anomaly_start.tv_sec) + usecs += USEC_PER_SEC; + usecs += curr.tv_usec - anomaly_start.tv_usec; + + if (usecs > UART_GET_ANOMALY_THRESHOLD(uart)) + goto known_good_char; + + if (ch) + anomaly_start.tv_sec = 0; + else + anomaly_start = curr; + + return; + + known_good_char: + anomaly_start.tv_sec = 0; } } if (status & BI) { if (ANOMALY_05000230) - in_break = 1; + if (bfin_revid() < 5) + do_gettimeofday(&anomaly_start); uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto ignore_char; @@ -778,6 +814,8 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, quot = uart_get_divisor(port, baud); spin_lock_irqsave(&uart->port.lock, flags); + UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15); + do { lsr = UART_GET_LSR(uart); } while (!(lsr & TEMT)); diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index b619065ceeb..a1b4f4eebd0 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -57,6 +57,9 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #else struct work_struct cts_workqueue; +# if ANOMALY_05000230 + unsigned int anomaly_threshold; +# endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS int cts_pin; diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index b619065ceeb..a1b4f4eebd0 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -57,6 +57,9 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #else struct work_struct cts_workqueue; +# if ANOMALY_05000230 + unsigned int anomaly_threshold; +# endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS int cts_pin; -- cgit v1.2.3-70-g09d2 From 1ba7a3ee310138015e744444043ce3e947429fce Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 11 Jan 2008 15:56:26 +0800 Subject: [Blackfin] serial driver: use simpler comment headers and strip out information that is maintained in the scm's log Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 27 ++++----------------------- 1 file changed, 4 insertions(+), 23 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 50aa3b2a19b..a07df539e52 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -1,30 +1,11 @@ /* - * File: drivers/serial/bfin_5xx.c - * Based on: Based on drivers/serial/sa1100.c - * Author: Aubrey Li + * Blackfin On-Chip Serial Driver * - * Created: - * Description: Driver for blackfin 5xx serial ports + * Copyright 2006-2007 Analog Devices Inc. * - * Modified: - * Copyright 2006 Analog Devices Inc. + * Enter bugs at http://blackfin.uclinux.org/ * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -- cgit v1.2.3-70-g09d2 From 095455682e29dbbc9f93ad83db459df524524992 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Sat, 2 Feb 2008 15:58:30 +0800 Subject: [Blackfin] serial driver: ADSP-BF52x arch/mach support Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- drivers/serial/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index b82595cf13e..202fb5c99b8 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -686,7 +686,7 @@ config UART0_RTS_PIN config SERIAL_BFIN_UART1 bool "Enable UART1" - depends on SERIAL_BFIN && (BF534 || BF536 || BF537 || BF54x) + depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561) help Enable UART1 -- cgit v1.2.3-70-g09d2 From 4cb4f22b19237e63c460c53fbd1c417cdaf63014 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Sat, 2 Feb 2008 14:29:25 +0800 Subject: [Blackfin] serial driver: Fix bug Poll RTS/CTS status in DMA mode as well https://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3858 Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 16 +++++----------- include/asm-blackfin/mach-bf527/bfin_serial_5xx.h | 3 +-- include/asm-blackfin/mach-bf533/bfin_serial_5xx.h | 2 +- include/asm-blackfin/mach-bf537/bfin_serial_5xx.h | 3 +-- include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 3 +-- include/asm-blackfin/mach-bf561/bfin_serial_5xx.h | 2 +- 6 files changed, 10 insertions(+), 19 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index a07df539e52..af866ab3f5a 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -53,7 +53,6 @@ #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); #else -static void bfin_serial_do_work(struct work_struct *work); static void bfin_serial_tx_chars(struct bfin_serial_port *uart); #endif @@ -372,8 +371,9 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) return IRQ_HANDLED; } +#endif - +#ifdef CONFIG_SERIAL_BFIN_CTSRTS static void bfin_serial_do_work(struct work_struct *work) { struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue); @@ -607,22 +607,17 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart) { #ifdef CONFIG_SERIAL_BFIN_CTSRTS unsigned int status; -# ifdef CONFIG_SERIAL_BFIN_DMA struct uart_info *info = uart->port.info; struct tty_struct *tty = info->tty; status = bfin_serial_get_mctrl(&uart->port); + uart_handle_cts_change(&uart->port, status & TIOCM_CTS); if (!(status & TIOCM_CTS)) { tty->hw_stopped = 1; + schedule_work(&uart->cts_workqueue); } else { tty->hw_stopped = 0; } -# else - status = bfin_serial_get_mctrl(&uart->port); - uart_handle_cts_change(&uart->port, status & TIOCM_CTS); - if (!(status & TIOCM_CTS)) - schedule_work(&uart->cts_workqueue); -# endif #endif } @@ -939,10 +934,9 @@ static void __init bfin_serial_init_ports(void) bfin_serial_ports[i].rx_dma_channel = bfin_serial_resource[i].uart_rx_dma_channel; init_timer(&(bfin_serial_ports[i].rx_dma_timer)); -#else - INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work); #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS + INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work); bfin_serial_ports[i].cts_pin = bfin_serial_resource[i].uart_cts_pin; bfin_serial_ports[i].rts_pin = diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index 233c585efc1..c0694ecd2ec 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -67,10 +67,9 @@ struct bfin_serial_port { unsigned int tx_dma_channel; unsigned int rx_dma_channel; struct work_struct tx_dma_workqueue; -#else - struct work_struct cts_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct work_struct cts_workqueue; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index a1b4f4eebd0..b6f513bee56 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -56,12 +56,12 @@ struct bfin_serial_port { unsigned int rx_dma_channel; struct work_struct tx_dma_workqueue; #else - struct work_struct cts_workqueue; # if ANOMALY_05000230 unsigned int anomaly_threshold; # endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct work_struct cts_workqueue; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index f18c517cc93..8fc672d3105 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -67,10 +67,9 @@ struct bfin_serial_port { unsigned int tx_dma_channel; unsigned int rx_dma_channel; struct work_struct tx_dma_workqueue; -#else - struct work_struct cts_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct work_struct cts_workqueue; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 8733d47747e..c459c484646 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -69,10 +69,9 @@ struct bfin_serial_port { unsigned int tx_dma_channel; unsigned int rx_dma_channel; struct work_struct tx_dma_workqueue; -#else - struct work_struct cts_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct work_struct cts_workqueue; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index a1b4f4eebd0..b6f513bee56 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -56,12 +56,12 @@ struct bfin_serial_port { unsigned int rx_dma_channel; struct work_struct tx_dma_workqueue; #else - struct work_struct cts_workqueue; # if ANOMALY_05000230 unsigned int anomaly_threshold; # endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS + struct work_struct cts_workqueue; int cts_pin; int rts_pin; #endif -- cgit v1.2.3-70-g09d2 From db288381e26e592b11572ce8199bedeadf0c0830 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Sat, 2 Feb 2008 17:05:02 +0800 Subject: [Blackfin] serial driver: Add flow control support to bf54x Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/Kconfig | 4 ++-- drivers/serial/bfin_5xx.c | 12 ++++++++++++ include/asm-blackfin/mach-bf548/bfin_serial_5xx.h | 3 +++ 3 files changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 202fb5c99b8..cf627cd1b4c 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -699,14 +699,14 @@ config BFIN_UART1_CTSRTS config UART1_CTS_PIN int "UART1 CTS pin" - depends on BFIN_UART1_CTSRTS && (BF53x || BF561) + depends on BFIN_UART1_CTSRTS && !BF54x default -1 help Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. config UART1_RTS_PIN int "UART1 RTS pin" - depends on BFIN_UART1_CTSRTS && (BF53x || BF561) + depends on BFIN_UART1_CTSRTS && !BF54x default -1 help Refer to ./include/asm-blackfin/gpio.h to see the GPIO map. diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index af866ab3f5a..69ac7007682 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -579,7 +579,11 @@ static unsigned int bfin_serial_get_mctrl(struct uart_port *port) if (uart->cts_pin < 0) return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +# ifdef BF54x + if (UART_GET_MSR(uart) & CTS) +# else if (gpio_get_value(uart->cts_pin)) +# endif return TIOCM_DSR | TIOCM_CAR; else #endif @@ -594,9 +598,17 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) return; if (mctrl & TIOCM_RTS) +# ifdef BF54x + UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS); +# else gpio_set_value(uart->rts_pin, 0); +# endif else +# ifdef BF54x + UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS); +# else gpio_set_value(uart->rts_pin, 1); +# endif #endif } diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index c459c484646..7e6339f62a5 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -24,6 +24,8 @@ #define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) #define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR)) #define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) +#define UART_GET_MSR(uart) bfin_read16(((uart)->port.membase + OFFSET_MSR)) +#define UART_GET_MCR(uart) bfin_read16(((uart)->port.membase + OFFSET_MCR)) #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) @@ -34,6 +36,7 @@ #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) #define UART_CLEAR_LSR(uart) bfin_write16(((uart)->port.membase + OFFSET_LSR), -1) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) +#define UART_PUT_MCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_MCR),v) #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS -- cgit v1.2.3-70-g09d2 From e48a411fa097c386c6081f4ed5a952aa3e21ca2b Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 11 Feb 2008 16:55:19 +0100 Subject: AVR32: Define PAGE_SHARED The virtual framebuffer driver needs PAGE_SHARED, which is not defined on avr32. Define it. Reported-by: Oliver Zander Signed-off-by: Haavard Skinnemoen --- include/asm-avr32/pgtable.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-avr32/pgtable.h b/include/asm-avr32/pgtable.h index 018f6e2a024..3ae7b548fce 100644 --- a/include/asm-avr32/pgtable.h +++ b/include/asm-avr32/pgtable.h @@ -157,6 +157,7 @@ extern struct page *empty_zero_page; #define _PAGE_S(x) _PAGE_NORMAL(x) #define PAGE_COPY _PAGE_P(PAGE_WRITE | PAGE_READ) +#define PAGE_SHARED _PAGE_S(PAGE_WRITE | PAGE_READ) #ifndef __ASSEMBLY__ /* -- cgit v1.2.3-70-g09d2 From 32019828d9012e584017a824f84798248c0060dd Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 13 Feb 2008 12:32:34 +0100 Subject: avr32: Fix broken pte dump code in do_page_fault() The per-task page tables only cover the first 2GiB of the address space. For kernel addresses, we need to do the lookup in init's page tables. This is a temporary workaround until we modify the per-task page tables to cover the whole 4GiB address space. Signed-off-by: Haavard Skinnemoen --- arch/avr32/mm/fault.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c index 6560cb18b4e..ce4e4296b95 100644 --- a/arch/avr32/mm/fault.c +++ b/arch/avr32/mm/fault.c @@ -189,6 +189,8 @@ no_context: page = sysreg_read(PTBR); printk(KERN_ALERT "ptbr = %08lx", page); + if (address >= TASK_SIZE) + page = (unsigned long)swapper_pg_dir; if (page) { page = ((unsigned long *)page)[address >> 22]; printk(" pgd = %08lx", page); -- cgit v1.2.3-70-g09d2 From f059267e7fa9e3efa1498eb963ba18ec25665c42 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 13 Feb 2008 14:29:30 +0100 Subject: avr32: Use correct config symbol in atstk1004 board code CONFIG_BOARD_ATSTK1002_SW2_CUSTOM should be CONFIG_BOARD_ATSTK100X_SW2_CUSTOM. Spotted by Robert P. J. Day. Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atstk1000/atstk1004.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index 5a77030e07a..e765a8652b3 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -129,7 +129,7 @@ static int __init atstk1004_init(void) #ifdef CONFIG_BOARD_ATSTK100X_SPI1 at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif -#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM +#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM at32_add_device_mci(0); #endif at32_add_device_lcdc(0, &atstk1000_lcdc_data, -- cgit v1.2.3-70-g09d2 From d45ad06273f797f6239b97fd9962ecd81eec847f Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 15 Feb 2008 14:38:40 +0100 Subject: avr32: Call tick_nohz_{stop,restart}_sched_tick() in idle loop This fixes a hang on boot with nohz enabled. nohz is not actually supported in mainline yet, but patches that add support for it are currently under review. When nohz is compiled out, the functions are no-ops, so this patch results in no functional change, but it arguably makes the code more correct. Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/process.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c index eaaa69bbdc3..faf8d0e7680 100644 --- a/arch/avr32/kernel/process.c +++ b/arch/avr32/kernel/process.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include @@ -30,8 +31,10 @@ void cpu_idle(void) { /* endless idle loop with no priority at all */ while (1) { + tick_nohz_stop_sched_tick(); while (!need_resched()) cpu_idle_sleep(); + tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); schedule(); preempt_disable(); -- cgit v1.2.3-70-g09d2 From 21eee2dd1b5702f15924f18f923b2a281f0e72e8 Mon Sep 17 00:00:00 2001 From: Thomas Klein Date: Wed, 13 Feb 2008 16:18:33 +0100 Subject: ehea: add kdump support This patch adds kdump support to the ehea driver. As the firmware doesn't free resource handles automatically, the driver has to run an as simple as possible free resource function in case of a crash shutdown. The function iterates over two arrays freeing all resource handles which are stored there. The arrays are kept up-to-date during normal runtime. The crash handler fn is triggered by the recently introduced PPC crash shutdown reg/unreg functions. Signed-off-by: Thomas Klein Signed-off-by: Jeff Garzik --- drivers/net/ehea/ehea.h | 34 +++++- drivers/net/ehea/ehea_main.c | 281 +++++++++++++++++++++++++++++++++++++++---- 2 files changed, 290 insertions(+), 25 deletions(-) diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index 88fb53eba71..7c4ead35cfa 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -40,7 +40,7 @@ #include #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0083" +#define DRV_VERSION "EHEA_0087" /* eHEA capability flags */ #define DLPAR_PORT_ADD_REM 1 @@ -386,6 +386,13 @@ struct ehea_port_res { #define EHEA_MAX_PORTS 16 + +#define EHEA_NUM_PORTRES_FW_HANDLES 6 /* QP handle, SendCQ handle, + RecvCQ handle, EQ handle, + SendMR handle, RecvMR handle */ +#define EHEA_NUM_PORT_FW_HANDLES 1 /* EQ handle */ +#define EHEA_NUM_ADAPTER_FW_HANDLES 2 /* MR handle, NEQ handle */ + struct ehea_adapter { u64 handle; struct of_device *ofdev; @@ -405,6 +412,31 @@ struct ehea_mc_list { u64 macaddr; }; +/* kdump support */ +struct ehea_fw_handle_entry { + u64 adh; /* Adapter Handle */ + u64 fwh; /* Firmware Handle */ +}; + +struct ehea_fw_handle_array { + struct ehea_fw_handle_entry *arr; + int num_entries; + struct semaphore lock; +}; + +struct ehea_bcmc_reg_entry { + u64 adh; /* Adapter Handle */ + u32 port_id; /* Logical Port Id */ + u8 reg_type; /* Registration Type */ + u64 macaddr; +}; + +struct ehea_bcmc_reg_array { + struct ehea_bcmc_reg_entry *arr; + int num_entries; + struct semaphore lock; +}; + #define EHEA_PORT_UP 1 #define EHEA_PORT_DOWN 0 #define EHEA_PHY_LINK_UP 1 diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index c051c7e09b9..21af674b764 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -35,6 +35,7 @@ #include #include #include +#include #include @@ -98,8 +99,10 @@ static int port_name_cnt; static LIST_HEAD(adapter_list); u64 ehea_driver_flags; struct work_struct ehea_rereg_mr_task; - struct semaphore dlpar_mem_lock; +struct ehea_fw_handle_array ehea_fw_handles; +struct ehea_bcmc_reg_array ehea_bcmc_regs; + static int __devinit ehea_probe_adapter(struct of_device *dev, const struct of_device_id *id); @@ -132,6 +135,160 @@ void ehea_dump(void *adr, int len, char *msg) } } +static void ehea_update_firmware_handles(void) +{ + struct ehea_fw_handle_entry *arr = NULL; + struct ehea_adapter *adapter; + int num_adapters = 0; + int num_ports = 0; + int num_portres = 0; + int i = 0; + int num_fw_handles, k, l; + + /* Determine number of handles */ + list_for_each_entry(adapter, &adapter_list, list) { + num_adapters++; + + for (k = 0; k < EHEA_MAX_PORTS; k++) { + struct ehea_port *port = adapter->port[k]; + + if (!port || (port->state != EHEA_PORT_UP)) + continue; + + num_ports++; + num_portres += port->num_def_qps + port->num_add_tx_qps; + } + } + + num_fw_handles = num_adapters * EHEA_NUM_ADAPTER_FW_HANDLES + + num_ports * EHEA_NUM_PORT_FW_HANDLES + + num_portres * EHEA_NUM_PORTRES_FW_HANDLES; + + if (num_fw_handles) { + arr = kzalloc(num_fw_handles * sizeof(*arr), GFP_KERNEL); + if (!arr) + return; /* Keep the existing array */ + } else + goto out_update; + + list_for_each_entry(adapter, &adapter_list, list) { + for (k = 0; k < EHEA_MAX_PORTS; k++) { + struct ehea_port *port = adapter->port[k]; + + if (!port || (port->state != EHEA_PORT_UP)) + continue; + + for (l = 0; + l < port->num_def_qps + port->num_add_tx_qps; + l++) { + struct ehea_port_res *pr = &port->port_res[l]; + + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->qp->fw_handle; + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->send_cq->fw_handle; + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->recv_cq->fw_handle; + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->eq->fw_handle; + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->send_mr.handle; + arr[i].adh = adapter->handle; + arr[i++].fwh = pr->recv_mr.handle; + } + arr[i].adh = adapter->handle; + arr[i++].fwh = port->qp_eq->fw_handle; + } + + arr[i].adh = adapter->handle; + arr[i++].fwh = adapter->neq->fw_handle; + + if (adapter->mr.handle) { + arr[i].adh = adapter->handle; + arr[i++].fwh = adapter->mr.handle; + } + } + +out_update: + kfree(ehea_fw_handles.arr); + ehea_fw_handles.arr = arr; + ehea_fw_handles.num_entries = i; +} + +static void ehea_update_bcmc_registrations(void) +{ + struct ehea_bcmc_reg_entry *arr = NULL; + struct ehea_adapter *adapter; + struct ehea_mc_list *mc_entry; + int num_registrations = 0; + int i = 0; + int k; + + /* Determine number of registrations */ + list_for_each_entry(adapter, &adapter_list, list) + for (k = 0; k < EHEA_MAX_PORTS; k++) { + struct ehea_port *port = adapter->port[k]; + + if (!port || (port->state != EHEA_PORT_UP)) + continue; + + num_registrations += 2; /* Broadcast registrations */ + + list_for_each_entry(mc_entry, &port->mc_list->list,list) + num_registrations += 2; + } + + if (num_registrations) { + arr = kzalloc(num_registrations * sizeof(*arr), GFP_KERNEL); + if (!arr) + return; /* Keep the existing array */ + } else + goto out_update; + + list_for_each_entry(adapter, &adapter_list, list) { + for (k = 0; k < EHEA_MAX_PORTS; k++) { + struct ehea_port *port = adapter->port[k]; + + if (!port || (port->state != EHEA_PORT_UP)) + continue; + + arr[i].adh = adapter->handle; + arr[i].port_id = port->logical_port_id; + arr[i].reg_type = EHEA_BCMC_BROADCAST | + EHEA_BCMC_UNTAGGED; + arr[i++].macaddr = port->mac_addr; + + arr[i].adh = adapter->handle; + arr[i].port_id = port->logical_port_id; + arr[i].reg_type = EHEA_BCMC_BROADCAST | + EHEA_BCMC_VLANID_ALL; + arr[i++].macaddr = port->mac_addr; + + list_for_each_entry(mc_entry, + &port->mc_list->list, list) { + arr[i].adh = adapter->handle; + arr[i].port_id = port->logical_port_id; + arr[i].reg_type = EHEA_BCMC_SCOPE_ALL | + EHEA_BCMC_MULTICAST | + EHEA_BCMC_UNTAGGED; + arr[i++].macaddr = mc_entry->macaddr; + + arr[i].adh = adapter->handle; + arr[i].port_id = port->logical_port_id; + arr[i].reg_type = EHEA_BCMC_SCOPE_ALL | + EHEA_BCMC_MULTICAST | + EHEA_BCMC_VLANID_ALL; + arr[i++].macaddr = mc_entry->macaddr; + } + } + } + +out_update: + kfree(ehea_bcmc_regs.arr); + ehea_bcmc_regs.arr = arr; + ehea_bcmc_regs.num_entries = i; +} + static struct net_device_stats *ehea_get_stats(struct net_device *dev) { struct ehea_port *port = netdev_priv(dev); @@ -1601,19 +1758,25 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa) memcpy(dev->dev_addr, mac_addr->sa_data, dev->addr_len); + down(&ehea_bcmc_regs.lock); + /* Deregister old MAC in pHYP */ ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC); if (ret) - goto out_free; + goto out_upregs; port->mac_addr = cb0->port_mac_addr << 16; /* Register new MAC in pHYP */ ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); if (ret) - goto out_free; + goto out_upregs; ret = 0; + +out_upregs: + ehea_update_bcmc_registrations(); + up(&ehea_bcmc_regs.lock); out_free: kfree(cb0); out: @@ -1775,9 +1938,11 @@ static void ehea_set_multicast_list(struct net_device *dev) } ehea_promiscuous(dev, 0); + down(&ehea_bcmc_regs.lock); + if (dev->flags & IFF_ALLMULTI) { ehea_allmulti(dev, 1); - return; + goto out; } ehea_allmulti(dev, 0); @@ -1803,6 +1968,8 @@ static void ehea_set_multicast_list(struct net_device *dev) } out: + ehea_update_bcmc_registrations(); + up(&ehea_bcmc_regs.lock); return; } @@ -2285,6 +2452,8 @@ static int ehea_up(struct net_device *dev) if (port->state == EHEA_PORT_UP) return 0; + down(&ehea_fw_handles.lock); + ret = ehea_port_res_setup(port, port->num_def_qps, port->num_add_tx_qps); if (ret) { @@ -2321,8 +2490,17 @@ static int ehea_up(struct net_device *dev) } } - ret = 0; + down(&ehea_bcmc_regs.lock); + + ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); + if (ret) { + ret = -EIO; + goto out_free_irqs; + } + port->state = EHEA_PORT_UP; + + ret = 0; goto out; out_free_irqs: @@ -2334,6 +2512,12 @@ out: if (ret) ehea_info("Failed starting %s. ret=%i", dev->name, ret); + ehea_update_bcmc_registrations(); + up(&ehea_bcmc_regs.lock); + + ehea_update_firmware_handles(); + up(&ehea_fw_handles.lock); + return ret; } @@ -2382,16 +2566,27 @@ static int ehea_down(struct net_device *dev) if (port->state == EHEA_PORT_DOWN) return 0; + down(&ehea_bcmc_regs.lock); ehea_drop_multicast_list(dev); + ehea_broadcast_reg_helper(port, H_DEREG_BCMC); + ehea_free_interrupts(dev); + down(&ehea_fw_handles.lock); + port->state = EHEA_PORT_DOWN; + ehea_update_bcmc_registrations(); + up(&ehea_bcmc_regs.lock); + ret = ehea_clean_all_portres(port); if (ret) ehea_info("Failed freeing resources for %s. ret=%i", dev->name, ret); + ehea_update_firmware_handles(); + up(&ehea_fw_handles.lock); + return ret; } @@ -2920,19 +3115,12 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter, dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT; INIT_WORK(&port->reset_task, ehea_reset_port); - - ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); - if (ret) { - ret = -EIO; - goto out_unreg_port; - } - ehea_set_ethtool_ops(dev); ret = register_netdev(dev); if (ret) { ehea_error("register_netdev failed. ret=%d", ret); - goto out_dereg_bc; + goto out_unreg_port; } port->lro_max_aggr = lro_max_aggr; @@ -2949,9 +3137,6 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter, return port; -out_dereg_bc: - ehea_broadcast_reg_helper(port, H_DEREG_BCMC); - out_unreg_port: ehea_unregister_port(port); @@ -2971,7 +3156,6 @@ static void ehea_shutdown_single_port(struct ehea_port *port) { unregister_netdev(port->netdev); ehea_unregister_port(port); - ehea_broadcast_reg_helper(port, H_DEREG_BCMC); kfree(port->mc_list); free_netdev(port->netdev); port->adapter->active_ports--; @@ -3014,7 +3198,6 @@ static int ehea_setup_ports(struct ehea_adapter *adapter) i++; }; - return 0; } @@ -3159,6 +3342,7 @@ static int __devinit ehea_probe_adapter(struct of_device *dev, ehea_error("Invalid ibmebus device probed"); return -EINVAL; } + down(&ehea_fw_handles.lock); adapter = kzalloc(sizeof(*adapter), GFP_KERNEL); if (!adapter) { @@ -3239,7 +3423,10 @@ out_kill_eq: out_free_ad: kfree(adapter); + out: + ehea_update_firmware_handles(); + up(&ehea_fw_handles.lock); return ret; } @@ -3258,18 +3445,41 @@ static int __devexit ehea_remove(struct of_device *dev) flush_scheduled_work(); + down(&ehea_fw_handles.lock); + ibmebus_free_irq(adapter->neq->attr.ist1, adapter); tasklet_kill(&adapter->neq_tasklet); ehea_destroy_eq(adapter->neq); ehea_remove_adapter_mr(adapter); list_del(&adapter->list); - kfree(adapter); + ehea_update_firmware_handles(); + up(&ehea_fw_handles.lock); + return 0; } +void ehea_crash_handler(void) +{ + int i; + + if (ehea_fw_handles.arr) + for (i = 0; i < ehea_fw_handles.num_entries; i++) + ehea_h_free_resource(ehea_fw_handles.arr[i].adh, + ehea_fw_handles.arr[i].fwh, + FORCE_FREE); + + if (ehea_bcmc_regs.arr) + for (i = 0; i < ehea_bcmc_regs.num_entries; i++) + ehea_h_reg_dereg_bcmc(ehea_bcmc_regs.arr[i].adh, + ehea_bcmc_regs.arr[i].port_id, + ehea_bcmc_regs.arr[i].reg_type, + ehea_bcmc_regs.arr[i].macaddr, + 0, H_DEREG_BCMC); +} + static int ehea_reboot_notifier(struct notifier_block *nb, unsigned long action, void *unused) { @@ -3330,7 +3540,12 @@ int __init ehea_module_init(void) INIT_WORK(&ehea_rereg_mr_task, ehea_rereg_mrs); + memset(&ehea_fw_handles, 0, sizeof(ehea_fw_handles)); + memset(&ehea_bcmc_regs, 0, sizeof(ehea_bcmc_regs)); + sema_init(&dlpar_mem_lock, 1); + sema_init(&ehea_fw_handles.lock, 1); + sema_init(&ehea_bcmc_regs.lock, 1); ret = check_module_parm(); if (ret) @@ -3340,12 +3555,18 @@ int __init ehea_module_init(void) if (ret) goto out; - register_reboot_notifier(&ehea_reboot_nb); + ret = register_reboot_notifier(&ehea_reboot_nb); + if (ret) + ehea_info("failed registering reboot notifier"); + + ret = crash_shutdown_register(&ehea_crash_handler); + if (ret) + ehea_info("failed registering crash handler"); ret = ibmebus_register_driver(&ehea_driver); if (ret) { ehea_error("failed registering eHEA device driver on ebus"); - goto out; + goto out2; } ret = driver_create_file(&ehea_driver.driver, @@ -3353,21 +3574,33 @@ int __init ehea_module_init(void) if (ret) { ehea_error("failed to register capabilities attribute, ret=%d", ret); - unregister_reboot_notifier(&ehea_reboot_nb); - ibmebus_unregister_driver(&ehea_driver); - goto out; + goto out3; } + return ret; + +out3: + ibmebus_unregister_driver(&ehea_driver); +out2: + unregister_reboot_notifier(&ehea_reboot_nb); + crash_shutdown_unregister(&ehea_crash_handler); out: return ret; } static void __exit ehea_module_exit(void) { + int ret; + flush_scheduled_work(); driver_remove_file(&ehea_driver.driver, &driver_attr_capabilities); ibmebus_unregister_driver(&ehea_driver); unregister_reboot_notifier(&ehea_reboot_nb); + ret = crash_shutdown_unregister(&ehea_crash_handler); + if (ret) + ehea_info("failed unregistering crash handler"); + kfree(ehea_fw_handles.arr); + kfree(ehea_bcmc_regs.arr); ehea_destroy_busmap(); } -- cgit v1.2.3-70-g09d2 From 5bd3670f31f1c58f500e55c4cdbc243fb4b2e3df Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Fri, 15 Feb 2008 15:08:04 -0600 Subject: fs_enet: Don't call phy_mii_ioctl() in atomic context. The lock acquisition in fs_ioctl() does not appear to actually be necessary, and thus is simply removed. Signed-off-by: Scott Wood Signed-off-by: Jeff Garzik --- drivers/net/fs_enet/fs_enet-main.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index 42d94edeee2..af869cf9ae7 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -946,16 +946,11 @@ static int fs_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct fs_enet_private *fep = netdev_priv(dev); struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&rq->ifr_data; - unsigned long flags; - int rc; if (!netif_running(dev)) return -EINVAL; - spin_lock_irqsave(&fep->lock, flags); - rc = phy_mii_ioctl(fep->phydev, mii, cmd); - spin_unlock_irqrestore(&fep->lock, flags); - return rc; + return phy_mii_ioctl(fep->phydev, mii, cmd); } extern int fs_mii_connect(struct net_device *dev); -- cgit v1.2.3-70-g09d2 From 6cb5e57701d355737f0bc9f94c0f80ed69a95b62 Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Fri, 15 Feb 2008 14:05:25 -0800 Subject: igb: fix legacy mode irq issue I booted an igb kernel with the option pci=nomsi and instantly noticed that interrupts no longer worked on my igb device. I took a look at the interrupt initialization and quickly discovered a comment stating: "DO NOT USE EIAME or IAME in legacy mode" It seemed a bit odd that bits to enable IAM were being set in legacy interrupt mode, so I dropped out the following parts and interrupts began working fine again. [Updated code flow and a nitpick spelling error --Auke] Signed-off-by: Andy Gospodarek Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/igb/igb_main.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index bff280eff5e..3480cc72467 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -439,7 +439,7 @@ static int igb_request_irq(struct igb_adapter *adapter) err = igb_request_msix(adapter); if (!err) { /* enable IAM, auto-mask, - * DO NOT USE EIAME or IAME in legacy mode */ + * DO NOT USE EIAM or IAM in legacy mode */ wr32(E1000_IAM, IMS_ENABLE_MASK); goto request_done; } @@ -465,14 +465,9 @@ static int igb_request_irq(struct igb_adapter *adapter) err = request_irq(adapter->pdev->irq, &igb_intr, IRQF_SHARED, netdev->name, netdev); - if (err) { + if (err) dev_err(&adapter->pdev->dev, "Error %d getting interrupt\n", err); - goto request_done; - } - - /* enable IAM, auto-mask */ - wr32(E1000_IAM, IMS_ENABLE_MASK); request_done: return err; -- cgit v1.2.3-70-g09d2 From 740db6d7f5bf194abf327613a5a500e3729fc19a Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Sun, 17 Feb 2008 11:53:49 -0700 Subject: update TULIP MAINTAINERS Kyle and I are co-maintaining tulip driver. Normally kyle will review my patchs and submit them. I'll deal with bugzilla.kernel.org bugs and try to resolve those bugs. Signed-off-by: Grant Grundler Signed-off-by: Jeff Garzik --- MAINTAINERS | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 36c7bc641db..2333255417f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3884,10 +3884,13 @@ M: trivial@kernel.org L: linux-kernel@vger.kernel.org S: Maintained -TULIP NETWORK DRIVER -L: tulip-users@lists.sourceforge.net -W: http://sourceforge.net/projects/tulip/ -S: Orphan +TULIP NETWORK DRIVERS +P: Grant Grundler +M: grundler@parisc-linux.org +P: Kyle McMartin +M: kyle@parisc-linux.org +L: netdev@vger.kernel.org +S: Maintained TUN/TAP driver P: Maxim Krasnyansky -- cgit v1.2.3-70-g09d2 From 7a7d23dac29825a75e375800573d53e49d864a42 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Sun, 17 Feb 2008 11:30:23 -0700 Subject: uli526x partially recognizing interface Patch fixes: http://bugzilla.kernel.org/show_bug.cgi?id=5839 Init sequence needs to poll phy until phy reset is complete. This is the same problem that I fixed in 2002 in tulip driver. Thanks to manty@manty.net for testing this patch. Thanks to Pozsar Balazs for posting/testing a similar patch before: http://lkml.org/lkml/2006/8/21/45 Signed-off-by: Grant Grundler Signed-off-by: Jeff Garzik --- drivers/net/tulip/uli526x.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c index a7afeea156b..a59c1f224aa 100644 --- a/drivers/net/tulip/uli526x.c +++ b/drivers/net/tulip/uli526x.c @@ -482,9 +482,11 @@ static void uli526x_init(struct net_device *dev) struct uli526x_board_info *db = netdev_priv(dev); unsigned long ioaddr = db->ioaddr; u8 phy_tmp; + u8 timeout; u16 phy_value; u16 phy_reg_reset; + ULI526X_DBUG(0, "uli526x_init()", 0); /* Reset M526x MAC controller */ @@ -509,11 +511,19 @@ static void uli526x_init(struct net_device *dev) /* Parser SROM and media mode */ db->media_mode = uli526x_media_mode; - /* Phyxcer capability setting */ + /* phyxcer capability setting */ phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id); phy_reg_reset = (phy_reg_reset | 0x8000); phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id); + + /* See IEEE 802.3-2002.pdf (Section 2, Chapter "22.2.4 Management + * functions") or phy data sheet for details on phy reset + */ udelay(500); + timeout = 10; + while (timeout-- && + phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id) & 0x8000) + udelay(100); /* Process Phyxcer Media Mode */ uli526x_set_phyxcer(db); -- cgit v1.2.3-70-g09d2 From d9d5dcc88ca5c72237e2d09d23a13a9b9d1e7445 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Mon, 18 Feb 2008 10:02:51 +0100 Subject: virtio_net: Fix oops on early interrupts - introduced by virtio reset code Signed-off-by: Jeff Garzik --- drivers/net/virtio_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index fdc23678117..19fd4cb0ddf 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -361,6 +361,7 @@ static int virtnet_probe(struct virtio_device *vdev) netif_napi_add(dev, &vi->napi, virtnet_poll, napi_weight); vi->dev = dev; vi->vdev = vdev; + vdev->priv = vi; /* We expect two virtqueues, receive then send. */ vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done); @@ -395,7 +396,6 @@ static int virtnet_probe(struct virtio_device *vdev) } pr_debug("virtnet: registered device %s\n", dev->name); - vdev->priv = vi; return 0; unregister: -- cgit v1.2.3-70-g09d2 From a80763c9090fe03a1af98f0106b2aaa4ad6502f9 Mon Sep 17 00:00:00 2001 From: Leonardo Potenza Date: Sun, 17 Feb 2008 18:23:15 +0100 Subject: drivers/net/cs89x0.c: compilation warning fix Suppress the warning message about the 'netcard_portlist' defined but not used. Signed-off-by: Leonardo Potenza Signed-off-by: Jeff Garzik --- drivers/net/cs89x0.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index 57175097513..348371fda59 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -172,30 +172,30 @@ static char version[] __initdata = them to system IRQ numbers. This mapping is card specific and is set to the configuration of the Cirrus Eval board for this chip. */ #ifdef CONFIG_ARCH_CLPS7500 -static unsigned int netcard_portlist[] __initdata = +static unsigned int netcard_portlist[] __used __initdata = { 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; static unsigned int cs8900_irq_map[] = {12,0,0,0}; #elif defined(CONFIG_SH_HICOSH4) -static unsigned int netcard_portlist[] __initdata = +static unsigned int netcard_portlist[] __used __initdata = { 0x0300, 0}; static unsigned int cs8900_irq_map[] = {1,0,0,0}; #elif defined(CONFIG_MACH_IXDP2351) -static unsigned int netcard_portlist[] __initdata = {IXDP2351_VIRT_CS8900_BASE, 0}; +static unsigned int netcard_portlist[] __used __initdata = {IXDP2351_VIRT_CS8900_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2351_CS8900, 0, 0, 0}; #include #elif defined(CONFIG_ARCH_IXDP2X01) #include -static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; +static unsigned int netcard_portlist[] __used __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0}; static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0}; #elif defined(CONFIG_ARCH_PNX010X) #include #include #define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */ #define CIRRUS_DEFAULT_IRQ VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */ -static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0}; +static unsigned int netcard_portlist[] __used __initdata = {CIRRUS_DEFAULT_BASE, 0}; static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0}; #else -static unsigned int netcard_portlist[] __initdata = +static unsigned int netcard_portlist[] __used __initdata = { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; static unsigned int cs8900_irq_map[] = {10,11,12,5}; #endif -- cgit v1.2.3-70-g09d2 From 61da96be07ec860e260ca4af0199b9d48d000b80 Mon Sep 17 00:00:00 2001 From: Komuro Date: Mon, 18 Feb 2008 22:06:19 +0900 Subject: pcnet_cs: if AX88190-based card, printk "use axnet_cs instead" message. * If ConfigBase is 0x03c0 && manfid is (0x0149,0xc1ab), printk "use axnet_cs instead" message. Actually, most of the card with manfid(0x0149, 0xc1ab) use pcnet_cs driver. * remove entry (0x021b, 0x0202) Signed-off-by: Komuro Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/pcnet_cs.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 6323988dfa1..fd8158a86f6 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -590,6 +590,13 @@ static int pcnet_config(struct pcmcia_device *link) dev->if_port = 0; } + if ((link->conf.ConfigBase == 0x03c0) + && (link->manf_id == 0x149) && (link->card_id = 0xc1ab)) { + printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n"); + printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n"); + goto failed; + } + local_hw_info = get_hwinfo(link); if (local_hw_info == NULL) local_hw_info = get_prom(link); @@ -1567,12 +1574,11 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0145), PCMCIA_DEVICE_MANF_CARD(0x0149, 0x0230), PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530), -/* PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), conflict with axnet_cs */ + PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab), PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110), PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328), PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041), PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452), -/* PCMCIA_DEVICE_MANF_CARD(0x021b, 0x0202), conflict with axnet_cs */ PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300), PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0307), PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030a), -- cgit v1.2.3-70-g09d2 From f5154fbf4902744cdd2bb7548487ceaac9840fd2 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 18 Feb 2008 14:41:55 +0100 Subject: claw: make use of DIV_ROUND_UP The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. Signed-off-by: Ursula Braun Signed-off-by: Jeff Garzik --- drivers/s390/net/claw.c | 39 ++++++++++++++++++--------------------- 1 file changed, 18 insertions(+), 21 deletions(-) diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c index c3076217871..d8a5c229c5a 100644 --- a/drivers/s390/net/claw.c +++ b/drivers/s390/net/claw.c @@ -1851,8 +1851,7 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid) } } /* See how many write buffers are required to hold this data */ - numBuffers= ( skb->len + privptr->p_env->write_size - 1) / - ( privptr->p_env->write_size); + numBuffers = DIV_ROUND_UP(skb->len, privptr->p_env->write_size); /* If that number of buffers isn't available, give up for now */ if (privptr->write_free_count < numBuffers || @@ -2114,8 +2113,7 @@ init_ccw_bk(struct net_device *dev) */ ccw_blocks_perpage= PAGE_SIZE / CCWBK_SIZE; ccw_pages_required= - (ccw_blocks_required+ccw_blocks_perpage -1) / - ccw_blocks_perpage; + DIV_ROUND_UP(ccw_blocks_required, ccw_blocks_perpage); #ifdef DEBUGMSG printk(KERN_INFO "%s: %s() > ccw_blocks_perpage=%d\n", @@ -2131,30 +2129,29 @@ init_ccw_bk(struct net_device *dev) * provide good performance. With packing buffers support 32k * buffers are used. */ - if (privptr->p_env->read_size < PAGE_SIZE) { - claw_reads_perpage= PAGE_SIZE / privptr->p_env->read_size; - claw_read_pages= (privptr->p_env->read_buffers + - claw_reads_perpage -1) / claw_reads_perpage; + if (privptr->p_env->read_size < PAGE_SIZE) { + claw_reads_perpage = PAGE_SIZE / privptr->p_env->read_size; + claw_read_pages = DIV_ROUND_UP(privptr->p_env->read_buffers, + claw_reads_perpage); } else { /* > or equal */ - privptr->p_buff_pages_perread= - (privptr->p_env->read_size + PAGE_SIZE - 1) / PAGE_SIZE; - claw_read_pages= - privptr->p_env->read_buffers * privptr->p_buff_pages_perread; + privptr->p_buff_pages_perread = + DIV_ROUND_UP(privptr->p_env->read_size, PAGE_SIZE); + claw_read_pages = privptr->p_env->read_buffers * + privptr->p_buff_pages_perread; } if (privptr->p_env->write_size < PAGE_SIZE) { - claw_writes_perpage= - PAGE_SIZE / privptr->p_env->write_size; - claw_write_pages= - (privptr->p_env->write_buffers + claw_writes_perpage -1) / - claw_writes_perpage; + claw_writes_perpage = + PAGE_SIZE / privptr->p_env->write_size; + claw_write_pages = DIV_ROUND_UP(privptr->p_env->write_buffers, + claw_writes_perpage); } else { /* > or equal */ - privptr->p_buff_pages_perwrite= - (privptr->p_env->read_size + PAGE_SIZE - 1) / PAGE_SIZE; - claw_write_pages= - privptr->p_env->write_buffers * privptr->p_buff_pages_perwrite; + privptr->p_buff_pages_perwrite = + DIV_ROUND_UP(privptr->p_env->read_size, PAGE_SIZE); + claw_write_pages = privptr->p_env->write_buffers * + privptr->p_buff_pages_perwrite; } #ifdef DEBUGMSG if (privptr->p_env->read_size < PAGE_SIZE) { -- cgit v1.2.3-70-g09d2 From 98e0f521456943801aacc7a4c0efb5b3bb6f89e0 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Mon, 18 Feb 2008 10:04:38 -0800 Subject: tlan: add static to function definitions The forward declarations were already marked static, make the definitions be static as well. Fixes the sparse warnings as well. drivers/net/tlan.c:1403:5: warning: symbol 'TLan_HandleInvalid' was not declared. Should it be static? drivers/net/tlan.c:1435:5: warning: symbol 'TLan_HandleTxEOF' was not declared. Should it be static? drivers/net/tlan.c:1521:5: warning: symbol 'TLan_HandleStatOverflow' was not declared. Should it be static? drivers/net/tlan.c:1557:5: warning: symbol 'TLan_HandleRxEOF' was not declared. Should it be static? drivers/net/tlan.c:1692:5: warning: symbol 'TLan_HandleDummy' was not declared. Should it be static? drivers/net/tlan.c:1722:5: warning: symbol 'TLan_HandleTxEOC' was not declared. Should it be static? drivers/net/tlan.c:1770:5: warning: symbol 'TLan_HandleStatusCheck' was not declared. Should it be static? drivers/net/tlan.c:1845:5: warning: symbol 'TLan_HandleRxEOC' was not declared. Should it be static? drivers/net/tlan.c:1905:6: warning: symbol 'TLan_Timer' was not declared. Should it be static? drivers/net/tlan.c:1986:6: warning: symbol 'TLan_ResetLists' was not declared. Should it be static? drivers/net/tlan.c:2046:6: warning: symbol 'TLan_FreeLists' was not declared. Should it be static? drivers/net/tlan.c:2095:6: warning: symbol 'TLan_PrintDio' was not declared. Should it be static? drivers/net/tlan.c:2130:6: warning: symbol 'TLan_PrintList' was not declared. Should it be static? drivers/net/tlan.c:2166:6: warning: symbol 'TLan_ReadAndClearStats' was not declared. Should it be static? drivers/net/tlan.c:2242:1: warning: symbol 'TLan_ResetAdapter' was not declared. Should it be static? drivers/net/tlan.c:2328:1: warning: symbol 'TLan_FinishReset' was not declared. Should it be static? drivers/net/tlan.c:2451:6: warning: symbol 'TLan_SetMac' was not declared. Should it be static? drivers/net/tlan.c:2493:6: warning: symbol 'TLan_PhyPrint' was not declared. Should it be static? drivers/net/tlan.c:2542:6: warning: symbol 'TLan_PhyDetect' was not declared. Should it be static? drivers/net/tlan.c:2589:6: warning: symbol 'TLan_PhyPowerDown' was not declared. Should it be static? drivers/net/tlan.c:2614:6: warning: symbol 'TLan_PhyPowerUp' was not declared. Should it be static? drivers/net/tlan.c:2635:6: warning: symbol 'TLan_PhyReset' was not declared. Should it be static? drivers/net/tlan.c:2663:6: warning: symbol 'TLan_PhyStartLink' was not declared. Should it be static? drivers/net/tlan.c:2750:6: warning: symbol 'TLan_PhyFinishAutoNeg' was not declared. Should it be static? drivers/net/tlan.c:2906:5: warning: symbol 'TLan_MiiReadReg' was not declared. Should it be static? drivers/net/tlan.c:2996:6: warning: symbol 'TLan_MiiSendData' was not declared. Should it be static? drivers/net/tlan.c:3038:6: warning: symbol 'TLan_MiiSync' was not declared. Should it be static? drivers/net/tlan.c:3077:6: warning: symbol 'TLan_MiiWriteReg' was not declared. Should it be static? drivers/net/tlan.c:3147:6: warning: symbol 'TLan_EeSendStart' was not declared. Should it be static? drivers/net/tlan.c:3187:5: warning: symbol 'TLan_EeSendByte' was not declared. Should it be static? drivers/net/tlan.c:3248:6: warning: symbol 'TLan_EeReceiveByte' was not declared. Should it be static? drivers/net/tlan.c:3306:5: warning: symbol 'TLan_EeReadByte' was not declared. Should it be static? Signed-off-by: Harvey Harrison Signed-off-by: Jeff Garzik --- drivers/net/tlan.c | 64 +++++++++++++++++++++++++++--------------------------- 1 file changed, 32 insertions(+), 32 deletions(-) diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index 3af5b92b48c..0166407d706 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -1400,7 +1400,7 @@ static void TLan_SetMulticastList( struct net_device *dev ) * **************************************************************/ -u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int ) { /* printk( "TLAN: Invalid interrupt on %s.\n", dev->name ); */ return 0; @@ -1432,7 +1432,7 @@ u32 TLan_HandleInvalid( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int ) { TLanPrivateInfo *priv = netdev_priv(dev); int eoc = 0; @@ -1518,7 +1518,7 @@ u32 TLan_HandleTxEOF( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int ) { TLan_ReadAndClearStats( dev, TLAN_RECORD ); @@ -1554,7 +1554,7 @@ u32 TLan_HandleStatOverflow( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int ) { TLanPrivateInfo *priv = netdev_priv(dev); u32 ack = 0; @@ -1689,7 +1689,7 @@ u32 TLan_HandleRxEOF( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleDummy( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleDummy( struct net_device *dev, u16 host_int ) { printk( "TLAN: Test interrupt on %s.\n", dev->name ); return 1; @@ -1719,7 +1719,7 @@ u32 TLan_HandleDummy( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int ) { TLanPrivateInfo *priv = netdev_priv(dev); TLanList *head_list; @@ -1767,7 +1767,7 @@ u32 TLan_HandleTxEOC( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int ) { TLanPrivateInfo *priv = netdev_priv(dev); u32 ack; @@ -1842,7 +1842,7 @@ u32 TLan_HandleStatusCheck( struct net_device *dev, u16 host_int ) * **************************************************************/ -u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int ) +static u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int ) { TLanPrivateInfo *priv = netdev_priv(dev); dma_addr_t head_list_phys; @@ -1902,7 +1902,7 @@ u32 TLan_HandleRxEOC( struct net_device *dev, u16 host_int ) * **************************************************************/ -void TLan_Timer( unsigned long data ) +static void TLan_Timer( unsigned long data ) { struct net_device *dev = (struct net_device *) data; TLanPrivateInfo *priv = netdev_priv(dev); @@ -1983,7 +1983,7 @@ void TLan_Timer( unsigned long data ) * **************************************************************/ -void TLan_ResetLists( struct net_device *dev ) +static void TLan_ResetLists( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); int i; @@ -2043,7 +2043,7 @@ void TLan_ResetLists( struct net_device *dev ) } /* TLan_ResetLists */ -void TLan_FreeLists( struct net_device *dev ) +static void TLan_FreeLists( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); int i; @@ -2092,7 +2092,7 @@ void TLan_FreeLists( struct net_device *dev ) * **************************************************************/ -void TLan_PrintDio( u16 io_base ) +static void TLan_PrintDio( u16 io_base ) { u32 data0, data1; int i; @@ -2127,7 +2127,7 @@ void TLan_PrintDio( u16 io_base ) * **************************************************************/ -void TLan_PrintList( TLanList *list, char *type, int num) +static void TLan_PrintList( TLanList *list, char *type, int num) { int i; @@ -2163,7 +2163,7 @@ void TLan_PrintList( TLanList *list, char *type, int num) * **************************************************************/ -void TLan_ReadAndClearStats( struct net_device *dev, int record ) +static void TLan_ReadAndClearStats( struct net_device *dev, int record ) { TLanPrivateInfo *priv = netdev_priv(dev); u32 tx_good, tx_under; @@ -2238,7 +2238,7 @@ void TLan_ReadAndClearStats( struct net_device *dev, int record ) * **************************************************************/ -void +static void TLan_ResetAdapter( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); @@ -2324,7 +2324,7 @@ TLan_ResetAdapter( struct net_device *dev ) -void +static void TLan_FinishReset( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); @@ -2448,7 +2448,7 @@ TLan_FinishReset( struct net_device *dev ) * **************************************************************/ -void TLan_SetMac( struct net_device *dev, int areg, char *mac ) +static void TLan_SetMac( struct net_device *dev, int areg, char *mac ) { int i; @@ -2490,7 +2490,7 @@ void TLan_SetMac( struct net_device *dev, int areg, char *mac ) * ********************************************************************/ -void TLan_PhyPrint( struct net_device *dev ) +static void TLan_PhyPrint( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 i, data0, data1, data2, data3, phy; @@ -2539,7 +2539,7 @@ void TLan_PhyPrint( struct net_device *dev ) * ********************************************************************/ -void TLan_PhyDetect( struct net_device *dev ) +static void TLan_PhyDetect( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 control; @@ -2586,7 +2586,7 @@ void TLan_PhyDetect( struct net_device *dev ) -void TLan_PhyPowerDown( struct net_device *dev ) +static void TLan_PhyPowerDown( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 value; @@ -2611,7 +2611,7 @@ void TLan_PhyPowerDown( struct net_device *dev ) -void TLan_PhyPowerUp( struct net_device *dev ) +static void TLan_PhyPowerUp( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 value; @@ -2632,7 +2632,7 @@ void TLan_PhyPowerUp( struct net_device *dev ) -void TLan_PhyReset( struct net_device *dev ) +static void TLan_PhyReset( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 phy; @@ -2660,7 +2660,7 @@ void TLan_PhyReset( struct net_device *dev ) -void TLan_PhyStartLink( struct net_device *dev ) +static void TLan_PhyStartLink( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 ability; @@ -2747,7 +2747,7 @@ void TLan_PhyStartLink( struct net_device *dev ) -void TLan_PhyFinishAutoNeg( struct net_device *dev ) +static void TLan_PhyFinishAutoNeg( struct net_device *dev ) { TLanPrivateInfo *priv = netdev_priv(dev); u16 an_adv; @@ -2903,7 +2903,7 @@ void TLan_PhyMonitor( struct net_device *dev ) * **************************************************************/ -int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val ) +static int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val ) { u8 nack; u16 sio, tmp; @@ -2993,7 +2993,7 @@ int TLan_MiiReadReg( struct net_device *dev, u16 phy, u16 reg, u16 *val ) * **************************************************************/ -void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits ) +static void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits ) { u16 sio; u32 i; @@ -3035,7 +3035,7 @@ void TLan_MiiSendData( u16 base_port, u32 data, unsigned num_bits ) * **************************************************************/ -void TLan_MiiSync( u16 base_port ) +static void TLan_MiiSync( u16 base_port ) { int i; u16 sio; @@ -3074,7 +3074,7 @@ void TLan_MiiSync( u16 base_port ) * **************************************************************/ -void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val ) +static void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val ) { u16 sio; int minten; @@ -3144,7 +3144,7 @@ void TLan_MiiWriteReg( struct net_device *dev, u16 phy, u16 reg, u16 val ) * **************************************************************/ -void TLan_EeSendStart( u16 io_base ) +static void TLan_EeSendStart( u16 io_base ) { u16 sio; @@ -3184,7 +3184,7 @@ void TLan_EeSendStart( u16 io_base ) * **************************************************************/ -int TLan_EeSendByte( u16 io_base, u8 data, int stop ) +static int TLan_EeSendByte( u16 io_base, u8 data, int stop ) { int err; u8 place; @@ -3245,7 +3245,7 @@ int TLan_EeSendByte( u16 io_base, u8 data, int stop ) * **************************************************************/ -void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop ) +static void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop ) { u8 place; u16 sio; @@ -3303,7 +3303,7 @@ void TLan_EeReceiveByte( u16 io_base, u8 *data, int stop ) * **************************************************************/ -int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data ) +static int TLan_EeReadByte( struct net_device *dev, u8 ee_addr, u8 *data ) { int err; TLanPrivateInfo *priv = netdev_priv(dev); -- cgit v1.2.3-70-g09d2 From 563e0ae06ff18f0b280f11cf706ba0172255ce52 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Mon, 18 Feb 2008 21:20:32 +0100 Subject: sis190: read the mac address from the eeprom first Reading a serie of zero from the cmos sram area do not work well with is_valid_ether_addr(). Let's read the mac address from the eeprom first as it seems more reliable. Fix for http://bugzilla.kernel.org/show_bug.cgi?id=9831 Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik --- drivers/net/sis190.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 202fdf35662..20745fd4e97 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -1633,13 +1633,18 @@ static inline void sis190_init_rxfilter(struct net_device *dev) static int __devinit sis190_get_mac_addr(struct pci_dev *pdev, struct net_device *dev) { - u8 from; + int rc; + + rc = sis190_get_mac_addr_from_eeprom(pdev, dev); + if (rc < 0) { + u8 reg; - pci_read_config_byte(pdev, 0x73, &from); + pci_read_config_byte(pdev, 0x73, ®); - return (from & 0x00000001) ? - sis190_get_mac_addr_from_apc(pdev, dev) : - sis190_get_mac_addr_from_eeprom(pdev, dev); + if (reg & 0x00000001) + rc = sis190_get_mac_addr_from_apc(pdev, dev); + } + return rc; } static void sis190_set_speed_auto(struct net_device *dev) -- cgit v1.2.3-70-g09d2 From cf7822983f21617b805712eec46eb31058508d6a Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Mon, 18 Feb 2008 17:24:30 -0600 Subject: gianfar: don't pass NULL dev ptr to DMA ops Change all dma op invocations in gianfar.c to actually pass in the device pointer. Currently, the value is ignored, but it will be used going forward as we implement archdata for 32-bit powerpc. Signed-off-by: Becky Bruce Acked-by: Andy Fleming Signed-off-by: Jeff Garzik --- drivers/net/gianfar.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 4244fc282f2..718cf77e345 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -605,7 +605,7 @@ void stop_gfar(struct net_device *dev) free_skb_resources(priv); - dma_free_coherent(NULL, + dma_free_coherent(&dev->dev, sizeof(struct txbd8)*priv->tx_ring_size + sizeof(struct rxbd8)*priv->rx_ring_size, priv->tx_bd_base, @@ -626,7 +626,7 @@ static void free_skb_resources(struct gfar_private *priv) for (i = 0; i < priv->tx_ring_size; i++) { if (priv->tx_skbuff[i]) { - dma_unmap_single(NULL, txbdp->bufPtr, + dma_unmap_single(&priv->dev->dev, txbdp->bufPtr, txbdp->length, DMA_TO_DEVICE); dev_kfree_skb_any(priv->tx_skbuff[i]); @@ -643,7 +643,7 @@ static void free_skb_resources(struct gfar_private *priv) if(priv->rx_skbuff != NULL) { for (i = 0; i < priv->rx_ring_size; i++) { if (priv->rx_skbuff[i]) { - dma_unmap_single(NULL, rxbdp->bufPtr, + dma_unmap_single(&priv->dev->dev, rxbdp->bufPtr, priv->rx_buffer_size, DMA_FROM_DEVICE); @@ -708,7 +708,7 @@ int startup_gfar(struct net_device *dev) gfar_write(®s->imask, IMASK_INIT_CLEAR); /* Allocate memory for the buffer descriptors */ - vaddr = (unsigned long) dma_alloc_coherent(NULL, + vaddr = (unsigned long) dma_alloc_coherent(&dev->dev, sizeof (struct txbd8) * priv->tx_ring_size + sizeof (struct rxbd8) * priv->rx_ring_size, &addr, GFP_KERNEL); @@ -919,7 +919,7 @@ err_irq_fail: rx_skb_fail: free_skb_resources(priv); tx_skb_fail: - dma_free_coherent(NULL, + dma_free_coherent(&dev->dev, sizeof(struct txbd8)*priv->tx_ring_size + sizeof(struct rxbd8)*priv->rx_ring_size, priv->tx_bd_base, @@ -1053,7 +1053,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) /* Set buffer length and pointer */ txbdp->length = skb->len; - txbdp->bufPtr = dma_map_single(NULL, skb->data, + txbdp->bufPtr = dma_map_single(&dev->dev, skb->data, skb->len, DMA_TO_DEVICE); /* Save the skb pointer so we can free it later */ @@ -1332,7 +1332,7 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp) */ skb_reserve(skb, alignamount); - bdp->bufPtr = dma_map_single(NULL, skb->data, + bdp->bufPtr = dma_map_single(&dev->dev, skb->data, priv->rx_buffer_size, DMA_FROM_DEVICE); bdp->length = 0; -- cgit v1.2.3-70-g09d2 From 68707acb5b5d4e2b7583cbff0883516afed54d4f Mon Sep 17 00:00:00 2001 From: Bill Hayes Date: Tue, 19 Feb 2008 10:24:41 -0800 Subject: igb: Fix panic with NICs with 1000BASE-SX PHY This patch eliminates a kernel panic with the igb driver in 2.6.25-rc2 when running on a Intel 82575 Ethernet controller with a 1000BASE-SX PHY. The panic does not happen with the 1000BASE-T PHY, only with a SX connection. Signed-off-by: Bill Hayes Signed-off-by: Andy Gospodarek Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/igb/igb_main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 3480cc72467..6a1f2309209 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -816,7 +816,8 @@ void igb_reset(struct igb_adapter *adapter) wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE); igb_reset_adaptive(&adapter->hw); - adapter->hw.phy.ops.get_phy_info(&adapter->hw); + if (adapter->hw.phy.ops.get_phy_info) + adapter->hw.phy.ops.get_phy_info(&adapter->hw); } /** @@ -2052,7 +2053,8 @@ static void igb_set_multi(struct net_device *netdev) static void igb_update_phy_info(unsigned long data) { struct igb_adapter *adapter = (struct igb_adapter *) data; - adapter->hw.phy.ops.get_phy_info(&adapter->hw); + if (adapter->hw.phy.ops.get_phy_info) + adapter->hw.phy.ops.get_phy_info(&adapter->hw); } /** -- cgit v1.2.3-70-g09d2 From d1e7fe4d92742dd1aa28ca11512628adc79a904b Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 20 Feb 2008 02:13:53 +0200 Subject: net/phy/mdio_bus.c: fix a check-after-use This patch fixes a check-after-use spotted by the Coverity checker. Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/net/phy/mdio_bus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 6e9f619c491..963630c65ca 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -49,13 +49,13 @@ int mdiobus_register(struct mii_bus *bus) int i; int err = 0; - mutex_init(&bus->mdio_lock); - if (NULL == bus || NULL == bus->name || NULL == bus->read || NULL == bus->write) return -EINVAL; + mutex_init(&bus->mdio_lock); + if (bus->reset) bus->reset(bus); -- cgit v1.2.3-70-g09d2 From f11cf25ef345a320b152aa68a014c8a65cf4ed44 Mon Sep 17 00:00:00 2001 From: Laura Garcia Date: Sat, 23 Feb 2008 18:56:35 +0100 Subject: [netdrvr] via-rhine: Use register offset definition for WOLcgClr Use register offset definition for WOLcgClr, rather than a magic number. This patch does not change the driver behaviour. Signed-off-by: Laura Garcia Liebana Signed-off-by: Jeff Garzik --- drivers/net/via-rhine.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 7c851b1e6da..8c9d6ae2bb3 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -1893,7 +1893,7 @@ static void rhine_shutdown (struct pci_dev *pdev) /* Make sure we use pattern 0, 1 and not 4, 5 */ if (rp->quirks & rq6patterns) - iowrite8(0x04, ioaddr + 0xA7); + iowrite8(0x04, ioaddr + WOLcgClr); if (rp->wolopts & WAKE_MAGIC) { iowrite8(WOLmagic, ioaddr + WOLcrSet); -- cgit v1.2.3-70-g09d2 From a84d0a3d6909c871bfa617a45a7517ce9292d4fb Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 22 Feb 2008 16:00:33 -0800 Subject: sky2: fix LED management Fix problems in LED management, so ethtool -p works correctly on Yukon-EC and other chips. The driver was incorrectly setting the PHY LED overide bits. Moral: read the spec sheet, not the vendor driver. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 123 ++++++++++++++++++++++++++--------------------------- drivers/net/sky2.h | 27 ++++++------ 2 files changed, 76 insertions(+), 74 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 9a6295909e4..54c662690f6 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -572,8 +572,9 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) default: /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */ ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; + /* turn off the Rx LED (LED_RX) */ - ledover &= ~PHY_M_LED_MO_RX; + ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); } if (hw->chip_id == CHIP_ID_YUKON_EC_U && @@ -602,7 +603,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) { /* turn on 100 Mbps LED (LED_LINK100) */ - ledover |= PHY_M_LED_MO_100; + ledover |= PHY_M_LED_MO_100(MO_LED_ON); } if (ledover) @@ -3322,82 +3323,80 @@ static void sky2_set_multicast(struct net_device *dev) /* Can have one global because blinking is controlled by * ethtool and that is always under RTNL mutex */ -static void sky2_led(struct sky2_hw *hw, unsigned port, int on) +static void sky2_led(struct sky2_port *sky2, enum led_mode mode) { - u16 pg; + struct sky2_hw *hw = sky2->hw; + unsigned port = sky2->port; - switch (hw->chip_id) { - case CHIP_ID_YUKON_XL: + spin_lock_bh(&sky2->phy_lock); + if (hw->chip_id == CHIP_ID_YUKON_EC_U || + hw->chip_id == CHIP_ID_YUKON_EX || + hw->chip_id == CHIP_ID_YUKON_SUPR) { + u16 pg; pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); - gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, - on ? (PHY_M_LEDC_LOS_CTRL(1) | - PHY_M_LEDC_INIT_CTRL(7) | - PHY_M_LEDC_STA1_CTRL(7) | - PHY_M_LEDC_STA0_CTRL(7)) - : 0); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); - break; + switch (mode) { + case MO_LED_OFF: + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, + PHY_M_LEDC_LOS_CTRL(8) | + PHY_M_LEDC_INIT_CTRL(8) | + PHY_M_LEDC_STA1_CTRL(8) | + PHY_M_LEDC_STA0_CTRL(8)); + break; + case MO_LED_ON: + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, + PHY_M_LEDC_LOS_CTRL(9) | + PHY_M_LEDC_INIT_CTRL(9) | + PHY_M_LEDC_STA1_CTRL(9) | + PHY_M_LEDC_STA0_CTRL(9)); + break; + case MO_LED_BLINK: + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, + PHY_M_LEDC_LOS_CTRL(0xa) | + PHY_M_LEDC_INIT_CTRL(0xa) | + PHY_M_LEDC_STA1_CTRL(0xa) | + PHY_M_LEDC_STA0_CTRL(0xa)); + break; + case MO_LED_NORM: + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, + PHY_M_LEDC_LOS_CTRL(1) | + PHY_M_LEDC_INIT_CTRL(8) | + PHY_M_LEDC_STA1_CTRL(7) | + PHY_M_LEDC_STA0_CTRL(7)); + } - default: - gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); + gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); + } else gm_phy_write(hw, port, PHY_MARV_LED_OVER, - on ? PHY_M_LED_ALL : 0); - } + PHY_M_LED_MO_DUP(mode) | + PHY_M_LED_MO_10(mode) | + PHY_M_LED_MO_100(mode) | + PHY_M_LED_MO_1000(mode) | + PHY_M_LED_MO_RX(mode) | + PHY_M_LED_MO_TX(mode)); + + spin_unlock_bh(&sky2->phy_lock); } /* blink LED's for finding board */ static int sky2_phys_id(struct net_device *dev, u32 data) { struct sky2_port *sky2 = netdev_priv(dev); - struct sky2_hw *hw = sky2->hw; - unsigned port = sky2->port; - u16 ledctrl, ledover = 0; - long ms; - int interrupted; - int onoff = 1; + unsigned int i; - if (!data || data > (u32) (MAX_SCHEDULE_TIMEOUT / HZ)) - ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT); - else - ms = data * 1000; - - /* save initial values */ - spin_lock_bh(&sky2->phy_lock); - if (hw->chip_id == CHIP_ID_YUKON_XL) { - u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); - ledctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); - } else { - ledctrl = gm_phy_read(hw, port, PHY_MARV_LED_CTRL); - ledover = gm_phy_read(hw, port, PHY_MARV_LED_OVER); - } - - interrupted = 0; - while (!interrupted && ms > 0) { - sky2_led(hw, port, onoff); - onoff = !onoff; - - spin_unlock_bh(&sky2->phy_lock); - interrupted = msleep_interruptible(250); - spin_lock_bh(&sky2->phy_lock); - - ms -= 250; - } + if (data == 0) + data = UINT_MAX; - /* resume regularly scheduled programming */ - if (hw->chip_id == CHIP_ID_YUKON_XL) { - u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3); - gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ledctrl); - gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); - } else { - gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); - gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); + for (i = 0; i < data; i++) { + sky2_led(sky2, MO_LED_ON); + if (msleep_interruptible(500)) + break; + sky2_led(sky2, MO_LED_OFF); + if (msleep_interruptible(500)) + break; } - spin_unlock_bh(&sky2->phy_lock); + sky2_led(sky2, MO_LED_NORM); return 0; } diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 5ab5c1c7c5a..7bb3ba9bcbd 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1318,18 +1318,21 @@ enum { BLINK_670MS = 4,/* 670 ms */ }; -/**** PHY_MARV_LED_OVER 16 bit r/w LED control */ -enum { - PHY_M_LED_MO_DUP = 3<<10,/* Bit 11..10: Duplex */ - PHY_M_LED_MO_10 = 3<<8, /* Bit 9.. 8: Link 10 */ - PHY_M_LED_MO_100 = 3<<6, /* Bit 7.. 6: Link 100 */ - PHY_M_LED_MO_1000 = 3<<4, /* Bit 5.. 4: Link 1000 */ - PHY_M_LED_MO_RX = 3<<2, /* Bit 3.. 2: Rx */ - PHY_M_LED_MO_TX = 3<<0, /* Bit 1.. 0: Tx */ - - PHY_M_LED_ALL = PHY_M_LED_MO_DUP | PHY_M_LED_MO_10 - | PHY_M_LED_MO_100 | PHY_M_LED_MO_1000 - | PHY_M_LED_MO_RX, +/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ +#define PHY_M_LED_MO_SGMII(x) ((x)<<14) /* Bit 15..14: SGMII AN Timer */ + +#define PHY_M_LED_MO_DUP(x) ((x)<<10) /* Bit 11..10: Duplex */ +#define PHY_M_LED_MO_10(x) ((x)<<8) /* Bit 9.. 8: Link 10 */ +#define PHY_M_LED_MO_100(x) ((x)<<6) /* Bit 7.. 6: Link 100 */ +#define PHY_M_LED_MO_1000(x) ((x)<<4) /* Bit 5.. 4: Link 1000 */ +#define PHY_M_LED_MO_RX(x) ((x)<<2) /* Bit 3.. 2: Rx */ +#define PHY_M_LED_MO_TX(x) ((x)<<0) /* Bit 1.. 0: Tx */ + +enum led_mode { + MO_LED_NORM = 0, + MO_LED_BLINK = 1, + MO_LED_OFF = 2, + MO_LED_ON = 3, }; /***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/ -- cgit v1.2.3-70-g09d2 From 179956f498bd8cc55fb803c4ee0cf18be59c8b01 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 21 Feb 2008 22:50:54 +0900 Subject: macb: Fix speed setting Fix NCFGR.SPD setting on 10Mbps. This bug was introduced by conversion to generic PHY layer in kernel 2.6.23. Signed-off-by: Atsushi Nemoto Signed-off-by: Jeff Garzik --- drivers/net/macb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 81bf005ff28..1d210ed4613 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -148,7 +148,7 @@ static void macb_handle_link_change(struct net_device *dev) if (phydev->duplex) reg |= MACB_BIT(FD); - if (phydev->speed) + if (phydev->speed == SPEED_100) reg |= MACB_BIT(SPD); macb_writel(bp, NCFGR, reg); -- cgit v1.2.3-70-g09d2 From ac0b3509f048b34ba1b60f164fd811b7cbdbc27a Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Thu, 21 Feb 2008 15:10:41 -0800 Subject: ixgb: add RNBC counter - no buffer count - to ethtool stats This counter is valuable to determine if the system is unable to timely return buffers to the hardware and this counter starts to increase well before the hardware starts to drop packets. If users experience rx_no_buffer_count increasing, they should increase the amount of descriptors. That will provide more buffers for the hardware and will decrease the chance of hard drops. Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/ixgb/ixgb_ethtool.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index 53a9fd086f9..75f3a68ee35 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -67,6 +67,7 @@ static struct ixgb_stats ixgb_gstrings_stats[] = { {"rx_over_errors", IXGB_STAT(net_stats.rx_over_errors)}, {"rx_crc_errors", IXGB_STAT(net_stats.rx_crc_errors)}, {"rx_frame_errors", IXGB_STAT(net_stats.rx_frame_errors)}, + {"rx_no_buffer_count", IXGB_STAT(stats.rnbc)}, {"rx_fifo_errors", IXGB_STAT(net_stats.rx_fifo_errors)}, {"rx_missed_errors", IXGB_STAT(net_stats.rx_missed_errors)}, {"tx_aborted_errors", IXGB_STAT(net_stats.tx_aborted_errors)}, -- cgit v1.2.3-70-g09d2 From 31f8c4fe5d24376c15e18e2936cfa18cd7e5d917 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Thu, 21 Feb 2008 15:10:47 -0800 Subject: e1000e: 82573 can use eerd method to read eeprom This simplifies the 82571/2/3 family initialization a bit and removes an initialization table no longer needed. Signed-off-by: Auke Kok Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/e1000e/82571.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 3beace55b58..f7ffd35c8a4 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1280,16 +1280,6 @@ static struct e1000_phy_operations e82_phy_ops_m88 = { }; static struct e1000_nvm_operations e82571_nvm_ops = { - .acquire_nvm = e1000_acquire_nvm_82571, - .read_nvm = e1000e_read_nvm_spi, - .release_nvm = e1000_release_nvm_82571, - .update_nvm = e1000_update_nvm_checksum_82571, - .valid_led_default = e1000_valid_led_default_82571, - .validate_nvm = e1000_validate_nvm_checksum_82571, - .write_nvm = e1000_write_nvm_82571, -}; - -static struct e1000_nvm_operations e82573_nvm_ops = { .acquire_nvm = e1000_acquire_nvm_82571, .read_nvm = e1000e_read_nvm_eerd, .release_nvm = e1000_release_nvm_82571, @@ -1355,6 +1345,6 @@ struct e1000_info e1000_82573_info = { .get_invariants = e1000_get_invariants_82571, .mac_ops = &e82571_mac_ops, .phy_ops = &e82_phy_ops_m88, - .nvm_ops = &e82573_nvm_ops, + .nvm_ops = &e82571_nvm_ops, }; -- cgit v1.2.3-70-g09d2 From 03ae221fe9987e22679642b5b687aebbb67bbb47 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 21 Feb 2008 15:10:52 -0800 Subject: e1000e: fix link up message to show ethX: Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/e1000.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 8b88c226e85..327c0620da3 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -42,8 +42,7 @@ struct e1000_info; #define ndev_printk(level, netdev, format, arg...) \ - printk(level "%s: %s: " format, (netdev)->dev.parent->bus_id, \ - (netdev)->name, ## arg) + printk(level "%s: " format, (netdev)->name, ## arg) #ifdef DEBUG #define ndev_dbg(netdev, format, arg...) \ -- cgit v1.2.3-70-g09d2 From 4a5694e66428607585c9f4dd14bcf4158d2de191 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 21 Feb 2008 15:10:57 -0800 Subject: e1000e: fix flow control when using ethtool overrides Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/lib.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 16f35fadb74..0860b5fb347 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -589,9 +589,6 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw) s32 ret_val; u16 nvm_data; - if (mac->fc != e1000_fc_default) - return 0; - /* Read and store word 0x0F of the EEPROM. This word contains bits * that determine the hardware's default PAUSE (flow control) mode, * a bit that determines whether the HW defaults to enabling or -- cgit v1.2.3-70-g09d2 From de92d84ec2305c490aa1db33f6e40680f8c236a8 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 21 Feb 2008 15:11:02 -0800 Subject: e1000e: fix flow control denial of service possibility this patch avoids a denial of service from an evildoer sending a continuous stream of flow control at our adapter that is plugged into a non-flow control enabled switch. Signed-off-by: Jesse Brandeburg Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/lib.c | 31 +++++-------------------------- 1 file changed, 5 insertions(+), 26 deletions(-) diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 0860b5fb347..341d74e81fb 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -1104,34 +1104,13 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { mac->fc = e1000_fc_rx_pause; hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n"); - } - /* Per the IEEE spec, at this point flow control should be - * disabled. However, we want to consider that we could - * be connected to a legacy switch that doesn't advertise - * desired flow control, but can be forced on the link - * partner. So if we advertised no flow control, that is - * what we will resolve to. If we advertised some kind of - * receive capability (Rx Pause Only or Full Flow Control) - * and the link partner advertised none, we will configure - * ourselves to enable Rx Flow Control only. We can do - * this safely for two reasons: If the link partner really - * didn't want flow control enabled, and we enable Rx, no - * harm done since we won't be receiving any PAUSE frames - * anyway. If the intent on the link partner was to have - * flow control enabled, then by us enabling RX only, we - * can at least receive pause frames and process them. - * This is a good idea because in most cases, since we are - * predominantly a server NIC, more times than not we will - * be asked to delay transmission of packets than asking - * our link partner to pause transmission of frames. - */ - else if ((mac->original_fc == e1000_fc_none) || - (mac->original_fc == e1000_fc_tx_pause)) { + } else { + /* + * Per the IEEE spec, at this point flow control + * should be disabled. + */ mac->fc = e1000_fc_none; hw_dbg(hw, "Flow Control = NONE.\r\n"); - } else { - mac->fc = e1000_fc_rx_pause; - hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n"); } /* Now we need to do one last check... If we auto- -- cgit v1.2.3-70-g09d2 From 489815ce224e75c2fcd5ebdfaa740d7f9a4f20d3 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Thu, 21 Feb 2008 15:11:07 -0800 Subject: e1000e: fix spelling errors in comments Fix some spelling errors and inconsistencies in comment blocks. Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/82571.c | 10 +++++----- drivers/net/e1000e/defines.h | 10 +++++----- drivers/net/e1000e/hw.h | 4 ++-- drivers/net/e1000e/ich8lan.c | 24 ++++++++++++------------ drivers/net/e1000e/lib.c | 16 ++++++++-------- drivers/net/e1000e/netdev.c | 16 +++++++++------- drivers/net/e1000e/phy.c | 10 +++++----- 7 files changed, 46 insertions(+), 44 deletions(-) diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index f7ffd35c8a4..7fe20310eb5 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -438,7 +438,7 @@ static void e1000_release_nvm_82571(struct e1000_hw *hw) * For non-82573 silicon, write data to EEPROM at offset using SPI interface. * * If e1000e_update_nvm_checksum is not called after this function, the - * EEPROM will most likley contain an invalid checksum. + * EEPROM will most likely contain an invalid checksum. **/ static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) @@ -547,7 +547,7 @@ static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw) * poll for completion. * * If e1000e_update_nvm_checksum is not called after this function, the - * EEPROM will most likley contain an invalid checksum. + * EEPROM will most likely contain an invalid checksum. **/ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) @@ -1053,7 +1053,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) /* If SerDes loopback mode is entered, there is no form * of reset to take the adapter out of that mode. So we * have to explicitly take the adapter out of loopback - * mode. This prevents drivers from twidling their thumbs + * mode. This prevents drivers from twiddling their thumbs * if another tool failed to take it out of loopback mode. */ ew32(SCTL, @@ -1098,7 +1098,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) * e1000e_get_laa_state_82571 - Get locally administered address state * @hw: pointer to the HW structure * - * Retrieve and return the current locally administed address state. + * Retrieve and return the current locally administered address state. **/ bool e1000e_get_laa_state_82571(struct e1000_hw *hw) { @@ -1113,7 +1113,7 @@ bool e1000e_get_laa_state_82571(struct e1000_hw *hw) * @hw: pointer to the HW structure * @state: enable/disable locally administered address * - * Enable/Disable the current locally administed address state. + * Enable/Disable the current locally administers address state. **/ void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state) { diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index 6232c3e9668..a4f511f549f 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -66,7 +66,7 @@ #define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ /* Extended Device Control */ -#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */ +#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */ #define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ #define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 @@ -75,12 +75,12 @@ #define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ #define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ -/* Receive Decriptor bit definitions */ +/* Receive Descriptor bit definitions */ #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ #define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ #define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ #define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ -#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ #define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ #define E1000_RXD_ERR_CE 0x01 /* CRC Error */ #define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ @@ -223,7 +223,7 @@ #define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */ #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ -/* Constants used to intrepret the masked PCI-X bus speed. */ +/* Constants used to interpret the masked PCI-X bus speed. */ #define HALF_DUPLEX 1 #define FULL_DUPLEX 2 @@ -517,7 +517,7 @@ /* PHY 1000 MII Register/Bit Definitions */ /* PHY Registers defined by IEEE */ #define PHY_CONTROL 0x00 /* Control Register */ -#define PHY_STATUS 0x01 /* Status Regiser */ +#define PHY_STATUS 0x01 /* Status Register */ #define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ #define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ #define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 3c5862f97db..916025b30fc 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -184,7 +184,7 @@ enum e1e_registers { E1000_ICRXDMTC = 0x04120, /* Irq Cause Rx Desc MinThreshold Count */ E1000_ICRXOC = 0x04124, /* Irq Cause Receiver Overrun Count */ E1000_RXCSUM = 0x05000, /* RX Checksum Control - RW */ - E1000_RFCTL = 0x05008, /* Receive Filter Control*/ + E1000_RFCTL = 0x05008, /* Receive Filter Control */ E1000_MTA = 0x05200, /* Multicast Table Array - RW Array */ E1000_RA = 0x05400, /* Receive Address - RW Array */ E1000_VFTA = 0x05600, /* VLAN Filter Table Array - RW Array */ @@ -202,7 +202,7 @@ enum e1e_registers { E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */ E1000_SWSM = 0x05B50, /* SW Semaphore */ E1000_FWSM = 0x05B54, /* FW Semaphore */ - E1000_HICR = 0x08F00, /* Host Inteface Control */ + E1000_HICR = 0x08F00, /* Host Interface Control */ }; /* RSS registers */ diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 8f8139de1f4..0ae39550768 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -671,7 +671,7 @@ static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw) * e1000_check_polarity_ife_ich8lan - Check cable polarity for IFE PHY * @hw: pointer to the HW structure * - * Polarity is determined on the polarity reveral feature being enabled. + * Polarity is determined on the polarity reversal feature being enabled. * This function is only called by other family-specific * routines. **/ @@ -947,7 +947,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) /* Either we should have a hardware SPI cycle in progress * bit to check against, in order to start a new cycle or * FDONE bit should be changed in the hardware so that it - * is 1 after harware reset, which can then be used as an + * is 1 after hardware reset, which can then be used as an * indication whether a cycle is in progress or has been * completed. */ @@ -1155,7 +1155,7 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, * which writes the checksum to the shadow ram. The changes in the shadow * ram are then committed to the EEPROM by processing each bank at a time * checking for the modified bit and writing only the pending changes. - * After a succesful commit, the shadow ram is cleared and is ready for + * After a successful commit, the shadow ram is cleared and is ready for * future writes. **/ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) @@ -1680,7 +1680,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) * - initialize LED identification * - setup receive address registers * - setup flow control - * - setup transmit discriptors + * - setup transmit descriptors * - clear statistics **/ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) @@ -1961,7 +1961,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_NOND0A_GBE_DISABLE); ew32(PHY_CTRL, phy_ctrl); - /* Call gig speed drop workaround on Giga disable before accessing + /* Call gig speed drop workaround on Gig disable before accessing * any PHY registers */ e1000e_gig_downshift_workaround_ich8lan(hw); @@ -1972,7 +1972,7 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) /** * e1000_set_kmrn_lock_loss_workaound_ich8lan - Set Kumeran workaround state * @hw: pointer to the HW structure - * @state: boolean value used to set the current Kumaran workaround state + * @state: boolean value used to set the current Kumeran workaround state * * If ICH8, set the current Kumeran workaround state (enabled - TRUE * /disabled - FALSE). @@ -2017,7 +2017,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_NOND0A_GBE_DISABLE); ew32(PHY_CTRL, reg); - /* Call gig speed drop workaround on Giga disable before + /* Call gig speed drop workaround on Gig disable before * accessing any PHY registers */ if (hw->mac.type == e1000_ich8lan) e1000e_gig_downshift_workaround_ich8lan(hw); @@ -2045,7 +2045,7 @@ void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw) * @hw: pointer to the HW structure * * Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC), - * LPLU, Giga disable, MDIC PHY reset): + * LPLU, Gig disable, MDIC PHY reset): * 1) Set Kumeran Near-end loopback * 2) Clear Kumeran Near-end loopback * Should only be called for ICH8[m] devices with IGP_3 Phy. @@ -2089,10 +2089,10 @@ static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw) } /** - * e1000_led_on_ich8lan - Turn LED's on + * e1000_led_on_ich8lan - Turn LEDs on * @hw: pointer to the HW structure * - * Turn on the LED's. + * Turn on the LEDs. **/ static s32 e1000_led_on_ich8lan(struct e1000_hw *hw) { @@ -2105,10 +2105,10 @@ static s32 e1000_led_on_ich8lan(struct e1000_hw *hw) } /** - * e1000_led_off_ich8lan - Turn LED's off + * e1000_led_off_ich8lan - Turn LEDs off * @hw: pointer to the HW structure * - * Turn off the LED's. + * Turn off the LEDs. **/ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw) { diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 341d74e81fb..95f75a43c9f 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -1140,7 +1140,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) } /** - * e1000e_get_speed_and_duplex_copper - Retreive current speed/duplex + * e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex * @hw: pointer to the HW structure * @speed: stores the current speed * @duplex: stores the current duplex @@ -1176,7 +1176,7 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup } /** - * e1000e_get_speed_and_duplex_fiber_serdes - Retreive current speed/duplex + * e1000e_get_speed_and_duplex_fiber_serdes - Retrieve current speed/duplex * @hw: pointer to the HW structure * @speed: stores the current speed * @duplex: stores the current duplex @@ -1386,7 +1386,7 @@ s32 e1000e_cleanup_led_generic(struct e1000_hw *hw) * e1000e_blink_led - Blink LED * @hw: pointer to the HW structure * - * Blink the led's which are set to be on. + * Blink the LEDs which are set to be on. **/ s32 e1000e_blink_led(struct e1000_hw *hw) { @@ -1491,7 +1491,7 @@ void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop) * @hw: pointer to the HW structure * * Returns 0 if successful, else returns -10 - * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not casued + * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused * the master requests to be disabled. * * Disables PCI-Express master access and verifies there are no pending @@ -1852,7 +1852,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) } /** - * e1000e_read_nvm_spi - Read EEPROM's using SPI + * e1000e_read_nvm_spi - Reads EEPROM using SPI * @hw: pointer to the HW structure * @offset: offset of word in the EEPROM to read * @words: number of words to read @@ -1956,7 +1956,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) * Writes data to EEPROM at offset using SPI interface. * * If e1000e_update_nvm_checksum is not called after this function , the - * EEPROM will most likley contain an invalid checksum. + * EEPROM will most likely contain an invalid checksum. **/ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { @@ -2198,7 +2198,7 @@ static u8 e1000_calculate_checksum(u8 *buffer, u32 length) * * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND * - * This function checks whether the HOST IF is enabled for command operaton + * This function checks whether the HOST IF is enabled for command operation * and also checks whether the previous command is completed. It busy waits * in case of previous command is not completed. **/ @@ -2230,7 +2230,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) } /** - * e1000e_check_mng_mode - check managament mode + * e1000e_check_mng_mode - check management mode * @hw: pointer to the HW structure * * Reads the firmware semaphore register and returns true (>0) if diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 3031d6d1624..7824bc2993a 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -1006,7 +1006,7 @@ static void e1000_irq_enable(struct e1000_adapter *adapter) * e1000_get_hw_control - get control of the h/w from f/w * @adapter: address of board private structure * - * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit. + * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that * the driver is loaded. For AMT version (only with 82573) * of the f/w this means that the network i/f is open. @@ -1032,7 +1032,7 @@ static void e1000_get_hw_control(struct e1000_adapter *adapter) * e1000_release_hw_control - release control of the h/w to f/w * @adapter: address of board private structure * - * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit. + * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that the * driver is no longer loaded. For AMT version (only with 82573) i * of the f/w this means that the network i/f is closed. @@ -1241,6 +1241,11 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter) /** * e1000_update_itr - update the dynamic ITR value based on statistics + * @adapter: pointer to adapter + * @itr_setting: current adapter->itr + * @packets: the number of packets during this measurement interval + * @bytes: the number of bytes during this measurement interval + * * Stores a new ITR value based on packets and byte * counts during the last interrupt. The advantage of per interrupt * computation is faster updates and more accurate ITR for the current @@ -1250,10 +1255,6 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter) * while increasing bulk throughput. * this functionality is controlled by the InterruptThrottleRate module * parameter (see e1000_param.c) - * @adapter: pointer to adapter - * @itr_setting: current adapter->itr - * @packets: the number of packets during this measurement interval - * @bytes: the number of bytes during this measurement interval **/ static unsigned int e1000_update_itr(struct e1000_adapter *adapter, u16 itr_setting, int packets, @@ -1366,6 +1367,7 @@ set_itr_now: /** * e1000_clean - NAPI Rx polling callback * @adapter: board private structure + * @budget: amount of packets driver is allowed to process this poll **/ static int e1000_clean(struct napi_struct *napi, int budget) { @@ -2000,7 +2002,7 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter) e1000_check_reset_block(hw)) return; - /* managebility (AMT) is enabled */ + /* manageability (AMT) is enabled */ if (er32(MANC) & E1000_MANC_SMBUS_EN) return; diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index fc6fee112f1..dab3c468a76 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -121,7 +121,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw) * @offset: register offset to be read * @data: pointer to the read data * - * Reads the MDI control regsiter in the PHY at offset and stores the + * Reads the MDI control register in the PHY at offset and stores the * information read to data. **/ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) @@ -1172,7 +1172,7 @@ s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active) } /** - * e1000e_check_downshift - Checks whether a downshift in speed occured + * e1000e_check_downshift - Checks whether a downshift in speed occurred * @hw: pointer to the HW structure * * Success returns 0, Failure returns 1 @@ -1388,8 +1388,8 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw) * * The automatic gain control (agc) normalizes the amplitude of the * received signal, adjusting for the attenuation produced by the - * cable. By reading the AGC registers, which reperesent the - * cobination of course and fine gain value, the value can be put + * cable. By reading the AGC registers, which represent the + * combination of course and fine gain value, the value can be put * into a lookup table to obtain the approximate cable length * for each channel. **/ @@ -1619,7 +1619,7 @@ s32 e1000e_phy_sw_reset(struct e1000_hw *hw) * Verify the reset block is not blocking us from resetting. Acquire * semaphore (if necessary) and read/set/write the device control reset * bit in the PHY. Wait the appropriate delay time for the device to - * reset and relase the semaphore (if necessary). + * reset and release the semaphore (if necessary). **/ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) { -- cgit v1.2.3-70-g09d2 From 3bf319a787a881aa6ad8213b98b93b8de2b6f0e0 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Thu, 21 Feb 2008 15:11:13 -0800 Subject: e1000e: remove unused read value in ASPM disable code. Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/netdev.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 7824bc2993a..fc5c63f4f57 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -3490,7 +3490,6 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) static void e1000e_disable_l1aspm(struct pci_dev *pdev) { int pos; - u32 cap; u16 val; /* @@ -3505,7 +3504,6 @@ static void e1000e_disable_l1aspm(struct pci_dev *pdev) * active. */ pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); - pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, &cap); pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &val); if (val & 0x2) { dev_warn(&pdev->dev, "Disabling L1 ASPM\n"); -- cgit v1.2.3-70-g09d2 From 4187377b2411d43ea4470b35162917a5093857bf Mon Sep 17 00:00:00 2001 From: Eric Dujardin Date: Sat, 23 Feb 2008 22:51:28 -0700 Subject: [POWERPC] Add export for mpc52xx_set_psc_clkdiv mpc52xx_set_psc_clkdiv is needed by PSC device drivers. Signed-off-by: Eric Dujardin Signed-off-by: Grant Likely --- arch/powerpc/platforms/52xx/mpc52xx_common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index 9aa4425d80b..4d5fd1dbd40 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -199,6 +199,7 @@ int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv) return 0; } +EXPORT_SYMBOL(mpc52xx_set_psc_clkdiv); /** * mpc52xx_restart: ppc_md->restart hook for mpc5200 using the watchdog timer -- cgit v1.2.3-70-g09d2 From 5f2f40a92e007ec5b503db20f3f70cb331c64f65 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sun, 24 Feb 2008 18:38:31 -0800 Subject: tipc: fix integer as NULL pointer sparse warnings in tipc net/tipc/cluster.c:145:2: warning: Using plain integer as NULL pointer net/tipc/link.c:3254:36: warning: Using plain integer as NULL pointer net/tipc/ref.c:151:15: warning: Using plain integer as NULL pointer net/tipc/zone.c:85:2: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison Signed-off-by: David S. Miller --- net/tipc/cluster.c | 2 +- net/tipc/link.c | 2 +- net/tipc/ref.c | 2 +- net/tipc/zone.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/net/tipc/cluster.c b/net/tipc/cluster.c index 95b373913aa..4bb3404f610 100644 --- a/net/tipc/cluster.c +++ b/net/tipc/cluster.c @@ -142,7 +142,7 @@ void tipc_cltr_attach_node(struct cluster *c_ptr, struct node *n_ptr) max_n_num = tipc_highest_allowed_slave; assert(n_num > 0); assert(n_num <= max_n_num); - assert(c_ptr->nodes[n_num] == 0); + assert(c_ptr->nodes[n_num] == NULL); c_ptr->nodes[n_num] = n_ptr; if (n_num > c_ptr->highest_node) c_ptr->highest_node = n_num; diff --git a/net/tipc/link.c b/net/tipc/link.c index 1b17fecee74..cefa99824c5 100644 --- a/net/tipc/link.c +++ b/net/tipc/link.c @@ -3251,7 +3251,7 @@ static void link_print(struct link *l_ptr, struct print_buf *buf, if ((mod(msg_seqno(buf_msg(l_ptr->last_out)) - msg_seqno(buf_msg(l_ptr->first_out))) != (l_ptr->out_queue_size - 1)) - || (l_ptr->last_out->next != 0)) { + || (l_ptr->last_out->next != NULL)) { tipc_printf(buf, "\nSend queue inconsistency\n"); tipc_printf(buf, "first_out= %x ", l_ptr->first_out); tipc_printf(buf, "next_out= %x ", l_ptr->next_out); diff --git a/net/tipc/ref.c b/net/tipc/ref.c index 6704a58c785..c38744c96ed 100644 --- a/net/tipc/ref.c +++ b/net/tipc/ref.c @@ -148,7 +148,7 @@ u32 tipc_ref_acquire(void *object, spinlock_t **lock) reference = (next_plus_upper & ~index_mask) + index; entry->data.reference = reference; entry->object = object; - if (lock != 0) + if (lock != NULL) *lock = &entry->lock; spin_unlock_bh(&entry->lock); } diff --git a/net/tipc/zone.c b/net/tipc/zone.c index 114e173f11a..3506f856344 100644 --- a/net/tipc/zone.c +++ b/net/tipc/zone.c @@ -82,7 +82,7 @@ void tipc_zone_attach_cluster(struct _zone *z_ptr, struct cluster *c_ptr) assert(c_ptr->addr); assert(c_num <= tipc_max_clusters); - assert(z_ptr->clusters[c_num] == 0); + assert(z_ptr->clusters[c_num] == NULL); z_ptr->clusters[c_num] = c_ptr; } -- cgit v1.2.3-70-g09d2 From b80a71860d0cfaaa9aa0722238cf3b69bb859eee Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 24 Feb 2008 18:45:09 -0800 Subject: [SPARC]: Fix build in arch/sparc/kernel/led.c CC [M] arch/sparc/kernel/led.o arch/sparc/kernel/led.c: In function 'led_blink': arch/sparc/kernel/led.c:35: error: invalid use of undefined type 'struct timer_list' arch/sparc/kernel/led.c:35: error: 'jiffies' undeclared (first use in this function) arch/sparc/kernel/led.c:35: error: (Each undeclared identifier is reported only once arch/sparc/kernel/led.c:35: error: for each function it appears in.) arch/sparc/kernel/led.c:36: error: 'avenrun' undeclared (first use in this function) arch/sparc/kernel/led.c:36: error: 'FSHIFT' undeclared (first use in this function) arch/sparc/kernel/led.c:36: error: 'HZ' undeclared (first use in this function) arch/sparc/kernel/led.c:37: error: invalid use of undefined type 'struct timer_list' arch/sparc/kernel/led.c:39: error: invalid use of undefined type 'struct timer_list' arch/sparc/kernel/led.c:40: error: invalid use of undefined type 'struct timer_list' arch/sparc/kernel/led.c:42: error: implicit declaration of function 'add_timer' arch/sparc/kernel/led.c: In function 'led_write_proc': arch/sparc/kernel/led.c:70: error: implicit declaration of function 'copy_from_user' arch/sparc/kernel/led.c:84: error: implicit declaration of function 'del_timer_sync' arch/sparc/kernel/led.c: In function 'led_init': arch/sparc/kernel/led.c:109: error: implicit declaration of function 'init_timer' arch/sparc/kernel/led.c:110: error: invalid use of undefined type 'struct timer_list' make[1]: *** [arch/sparc/kernel/led.o] Error 1 Based upon original patch by Robert Reif. Signed-off-by: David S. Miller --- arch/sparc/kernel/led.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c index 313d1620ae8..59e9344e7a0 100644 --- a/arch/sparc/kernel/led.c +++ b/arch/sparc/kernel/led.c @@ -3,6 +3,9 @@ #include #include #include +#include +#include +#include #include -- cgit v1.2.3-70-g09d2 From 7769bd1c65e3dc22391d60420fea0c859e39b716 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 24 Feb 2008 19:47:51 -0800 Subject: [SPARC64]: Fix section mismatchs from dr_cpu_data Fix following warnings: WARNING: vmlinux.o(.text+0x4b258): Section mismatch in reference from the function dr_cpu_data() to the function .devinit.text:mdesc_fill_in_cpu_data() WARNING: vmlinux.o(.text+0x4b290): Section mismatch in reference from the function dr_cpu_data() to the function .cpuinit.text:cpu_up() mdesc_fill_in_cpu_data() is only used during early init and for cpu hotplug so the __cpuinit annotation is the correct choice. We have the call chain: dr_cpu_data() => dr_cpu_configure() => mdesc_fill_in_cpu_data() dr_cpu_data() is used only during early init and for cpu hotplug. So annotating them all __cpuinit solves the section mismatch and should be correct. Signed-off-by: Sam Ravnborg Signed-off-by: David S. Miller --- arch/sparc64/kernel/ds.c | 14 +++++++------- arch/sparc64/kernel/mdesc.c | 2 +- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/sparc64/kernel/ds.c b/arch/sparc64/kernel/ds.c index eeb5a2fc788..bd76482077b 100644 --- a/arch/sparc64/kernel/ds.c +++ b/arch/sparc64/kernel/ds.c @@ -525,10 +525,10 @@ static void dr_cpu_mark(struct ds_data *resp, int cpu, int ncpus, } } -static int dr_cpu_configure(struct ds_info *dp, - struct ds_cap_state *cp, - u64 req_num, - cpumask_t *mask) +static int __cpuinit dr_cpu_configure(struct ds_info *dp, + struct ds_cap_state *cp, + u64 req_num, + cpumask_t *mask) { struct ds_data *resp; int resp_len, ncpus, cpu; @@ -623,9 +623,9 @@ static int dr_cpu_unconfigure(struct ds_info *dp, return 0; } -static void dr_cpu_data(struct ds_info *dp, - struct ds_cap_state *cp, - void *buf, int len) +static void __cpuinit dr_cpu_data(struct ds_info *dp, + struct ds_cap_state *cp, + void *buf, int len) { struct ds_data *data = buf; struct dr_cpu_tag *tag = (struct dr_cpu_tag *) (data + 1); diff --git a/arch/sparc64/kernel/mdesc.c b/arch/sparc64/kernel/mdesc.c index 856659bb131..91008358956 100644 --- a/arch/sparc64/kernel/mdesc.c +++ b/arch/sparc64/kernel/mdesc.c @@ -758,7 +758,7 @@ static void __devinit get_mondo_data(struct mdesc_handle *hp, u64 mp, get_one_mondo_bits(val, &tb->nonresum_qmask, 2); } -void __devinit mdesc_fill_in_cpu_data(cpumask_t mask) +void __cpuinit mdesc_fill_in_cpu_data(cpumask_t mask) { struct mdesc_handle *hp = mdesc_grab(); u64 mp; -- cgit v1.2.3-70-g09d2 From 896aef430e5afb56b5f7b1d959226b8a6a08108a Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 24 Feb 2008 19:49:52 -0800 Subject: [SPARC64]: Fix section mismatch from kernel_map_range Fix following warnings: WARNING: vmlinux.o(.text+0x4f980): Section mismatch in reference from the function kernel_map_range() to the function .init.text:__alloc_bootmem() WARNING: vmlinux.o(.text+0x4f9cc): Section mismatch in reference from the function kernel_map_range() to the function .init.text:__alloc_bootmem() alloc_bootmem() is only used during early init and for any subsequent call to kernel_map_range() the program logic avoid the call. So annotate kernel_map_range() with __ref to tell modpost to ignore the reference to a __init function. Signed-off-by: Sam Ravnborg Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 9e6bca266d8..b5c30416fda 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -1010,7 +1010,8 @@ static struct linux_prom64_registers pall[MAX_BANKS] __initdata; static int pall_ents __initdata; #ifdef CONFIG_DEBUG_PAGEALLOC -static unsigned long kernel_map_range(unsigned long pstart, unsigned long pend, pgprot_t prot) +static unsigned long __ref kernel_map_range(unsigned long pstart, + unsigned long pend, pgprot_t prot) { unsigned long vstart = PAGE_OFFSET + pstart; unsigned long vend = PAGE_OFFSET + pend; -- cgit v1.2.3-70-g09d2 From 0711d857605ba598cd6d4254462d1419b233321b Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 25 Feb 2008 15:16:50 +0800 Subject: Blackfin Serial Driver: Fix bug - Increase buffer tail immediately before starting tx dma. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=2920 Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 69ac7007682..2fb3081c502 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -64,15 +64,20 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); static void bfin_serial_stop_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + struct circ_buf *xmit = &uart->port.info->xmit; #if !defined(CONFIG_BF54x) && !defined(CONFIG_SERIAL_BFIN_DMA) unsigned short ier; #endif while (!(UART_GET_LSR(uart) & TEMT)) - continue; + cpu_relax(); #ifdef CONFIG_SERIAL_BFIN_DMA disable_dma(uart->tx_dma_channel); + xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx += uart->tx_count; + uart->tx_count = 0; + uart->tx_done = 1; #else #ifdef CONFIG_BF54x /* Clear TFI bit */ @@ -94,7 +99,8 @@ static void bfin_serial_start_tx(struct uart_port *port) struct bfin_serial_port *uart = (struct bfin_serial_port *)port; #ifdef CONFIG_SERIAL_BFIN_DMA - bfin_serial_dma_tx_chars(uart); + if (uart->tx_done) + bfin_serial_dma_tx_chars(uart); #else #ifdef CONFIG_BF54x UART_SET_IER(uart, ETBEI); @@ -389,12 +395,10 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) unsigned short ier; int flags = 0; - if (!uart->tx_done) - return; uart->tx_done = 0; if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { - bfin_serial_stop_tx(&uart->port); + uart->tx_count = 0; uart->tx_done = 1; return; } @@ -428,9 +432,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) set_dma_x_modify(uart->tx_dma_channel, 1); enable_dma(uart->tx_dma_channel); - xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx += uart->tx_count; - #ifdef CONFIG_BF54x UART_SET_IER(uart, ETBEI); #else @@ -515,8 +516,8 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) spin_lock(&uart->port.lock); if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { - clear_dma_irqstat(uart->tx_dma_channel); disable_dma(uart->tx_dma_channel); + clear_dma_irqstat(uart->tx_dma_channel); #ifdef CONFIG_BF54x UART_CLEAR_IER(uart, ETBEI); #else @@ -527,7 +528,8 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uart->port); - uart->tx_done = 1; + xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx += uart->tx_count; bfin_serial_dma_tx_chars(uart); } @@ -542,12 +544,14 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) unsigned short irqstat; uart->rx_dma_nrows++; - if (uart->rx_dma_nrows == DMA_RX_YCOUNT) { + uart->rx_dma_buf.tail = DMA_RX_XCOUNT * uart->rx_dma_nrows; + bfin_serial_dma_rx_chars(uart); + if (uart->rx_dma_nrows >= DMA_RX_YCOUNT) { uart->rx_dma_nrows = 0; - uart->rx_dma_buf.tail = DMA_RX_XCOUNT*DMA_RX_YCOUNT; - bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.head = uart->rx_dma_buf.tail = 0; + uart->rx_dma_buf.tail = 0; } + uart->rx_dma_buf.head = uart->rx_dma_buf.tail; + spin_lock(&uart->port.lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); clear_dma_irqstat(uart->rx_dma_channel); -- cgit v1.2.3-70-g09d2 From 56f5de8fe7c127f6fb94b7a061d53090fd4a1c49 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 25 Feb 2008 15:19:09 +0800 Subject: Blackfin Serial Driver: Fix bug - update tx dma buffer tail before wake up processes. Also make rx dma buffer work as a loop. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 51 +++++++++++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 22 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 2fb3081c502..2a411748579 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -415,7 +415,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) */ bfin_serial_mctrl_check(uart); - spin_lock_irqsave(&uart->port.lock, flags); uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) uart->tx_count = UART_XMIT_SIZE - xmit->tail; @@ -439,7 +438,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) ier |= ETBEI; UART_PUT_IER(uart, ier); #endif - spin_unlock_irqrestore(&uart->port.lock, flags); } static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) @@ -450,7 +448,9 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) status = UART_GET_LSR(uart); UART_CLEAR_LSR(uart); - uart->port.icount.rx += CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, UART_XMIT_SIZE);; + uart->port.icount.rx += + CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, + UART_XMIT_SIZE); if (status & BI) { uart->port.icount.brk++; @@ -476,10 +476,12 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) else flg = TTY_NORMAL; - for (i = uart->rx_dma_buf.head; i < uart->rx_dma_buf.tail; i++) { - if (uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) - goto dma_ignore_char; - uart_insert_char(&uart->port, status, OE, uart->rx_dma_buf.buf[i], flg); + for (i = uart->rx_dma_buf.tail; i != uart->rx_dma_buf.head; i++) { + if (i >= UART_XMIT_SIZE) + i = 0; + if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) + uart_insert_char(&uart->port, status, OE, + uart->rx_dma_buf.buf[i], flg); } dma_ignore_char: @@ -492,16 +494,20 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) int flags = 0; spin_lock_irqsave(&uart->port.lock, flags); - x_pos = DMA_RX_XCOUNT - get_dma_curr_xcount(uart->rx_dma_channel); + uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); + x_pos = get_dma_curr_xcount(uart->rx_dma_channel); + uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; + if (uart->rx_dma_nrows == DMA_RX_YCOUNT) + uart->rx_dma_nrows = 0; + x_pos = DMA_RX_XCOUNT - x_pos; if (x_pos == DMA_RX_XCOUNT) x_pos = 0; pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos; - - if (pos>uart->rx_dma_buf.tail) { - uart->rx_dma_buf.tail = pos; + if (pos != uart->rx_dma_buf.tail) { + uart->rx_dma_buf.head = pos; bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.head = uart->rx_dma_buf.tail; + uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } spin_unlock_irqrestore(&uart->port.lock, flags); uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; @@ -525,12 +531,12 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) ier &= ~ETBEI; UART_PUT_IER(uart, ier); #endif - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uart->port); - xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); uart->port.icount.tx += uart->tx_count; + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uart->port); + bfin_serial_dma_tx_chars(uart); } @@ -542,15 +548,16 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; unsigned short irqstat; + int pos; - uart->rx_dma_nrows++; - uart->rx_dma_buf.tail = DMA_RX_XCOUNT * uart->rx_dma_nrows; - bfin_serial_dma_rx_chars(uart); - if (uart->rx_dma_nrows >= DMA_RX_YCOUNT) { - uart->rx_dma_nrows = 0; - uart->rx_dma_buf.tail = 0; + uart->rx_dma_nrows = DMA_RX_YCOUNT - + get_dma_curr_ycount(uart->rx_dma_channel); + pos = DMA_RX_XCOUNT * uart->rx_dma_nrows; + if (pos != uart->rx_dma_buf.tail) { + uart->rx_dma_buf.head = pos; + bfin_serial_dma_rx_chars(uart); + uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } - uart->rx_dma_buf.head = uart->rx_dma_buf.tail; spin_lock(&uart->port.lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); -- cgit v1.2.3-70-g09d2 From cc645a020510cf68332a71394a32c1eacb92c6ed Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 14 Feb 2008 15:09:27 +0900 Subject: sh: Rename SH-3 CCR3 reg to avoid synclink_cs clash. drivers/char/pcmcia/synclink_cs.c:284:1: warning: "CCR3" redefined In file included from include/asm/cache.h:13, from include/asm/processor_32.h:15, from include/asm/processor.h:60, from include/linux/prefetch.h:14, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/char/pcmcia/synclink_cs.c:38: include/asm/cpu/cache.h:38:1: warning: this is the location of the previous definition Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh3/probe.c | 4 ++-- include/asm-sh/cpu-sh3/cache.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c index fcc80bb7bee..10f2a760c5e 100644 --- a/arch/sh/kernel/cpu/sh3/probe.c +++ b/arch/sh/kernel/cpu/sh3/probe.c @@ -94,9 +94,9 @@ int __uses_jump_to_uncached detect_cpu_and_cache_system(void) boot_cpu_data.dcache.way_incr = (1 << 13); boot_cpu_data.dcache.entry_mask = 0x1ff0; boot_cpu_data.dcache.sets = 512; - ctrl_outl(CCR_CACHE_32KB, CCR3); + ctrl_outl(CCR_CACHE_32KB, CCR3_REG); #else - ctrl_outl(CCR_CACHE_16KB, CCR3); + ctrl_outl(CCR_CACHE_16KB, CCR3_REG); #endif #endif } diff --git a/include/asm-sh/cpu-sh3/cache.h b/include/asm-sh/cpu-sh3/cache.h index 56bd838b7db..bee2d81c56b 100644 --- a/include/asm-sh/cpu-sh3/cache.h +++ b/include/asm-sh/cpu-sh3/cache.h @@ -35,7 +35,7 @@ defined(CONFIG_CPU_SUBTYPE_SH7710) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) -#define CCR3 0xa40000b4 +#define CCR3_REG 0xa40000b4 #define CCR_CACHE_16KB 0x00010000 #define CCR_CACHE_32KB 0x00020000 #endif -- cgit v1.2.3-70-g09d2 From 8ef97dd7a8721882732ea8041fc07c80be3882ba Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 14 Feb 2008 15:30:54 +0900 Subject: sh: SH5-103 needs to select CPU_SH5. Without this, it's possible to have CONFIG_SUPERH32=y set on SH5-103 parts, which leads to much build badness. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index b3400b5ad5c..783cfbbf87c 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -330,6 +330,7 @@ config CPU_SUBTYPE_SH5_101 config CPU_SUBTYPE_SH5_103 bool "Support SH5-103 processor" + select CPU_SH5 endchoice -- cgit v1.2.3-70-g09d2 From 82d416fffb5e8e39e899be7075dbeeac5fb8f0c2 Mon Sep 17 00:00:00 2001 From: Bryan Rosenburg Date: Wed, 20 Feb 2008 17:31:48 -0600 Subject: RDMA/cxgb3: Fix shift calc in build_phys_page_list() for 1-entry page lists A single entry (addr 0x10001000, size 0x2000) will get converted to page address 0x10000000 with a page size of 0x4000. The code as it stands doesn't address the single buffer case, but in fact it allows the subsequent single-buffer special case to be eliminated entirely. Because the mask now includes the (page adjusted) starting and ending addresses, the general case works for the single buffer case as well. Signed-off-by: Bryan Rosenburg Acked-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/iwch_mem.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/iwch_mem.c b/drivers/infiniband/hw/cxgb3/iwch_mem.c index 73bfd1656f8..b8797c66676 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_mem.c +++ b/drivers/infiniband/hw/cxgb3/iwch_mem.c @@ -136,14 +136,8 @@ int build_phys_page_list(struct ib_phys_buf *buffer_list, /* Find largest page shift we can use to cover buffers */ for (*shift = PAGE_SHIFT; *shift < 27; ++(*shift)) - if (num_phys_buf > 1) { - if ((1ULL << *shift) & mask) - break; - } else - if (1ULL << *shift >= - buffer_list[0].size + - (buffer_list[0].addr & ((1ULL << *shift) - 1))) - break; + if ((1ULL << *shift) & mask) + break; buffer_list[0].size += buffer_list[0].addr & ((1ULL << *shift) - 1); buffer_list[0].addr &= ~0ull << *shift; -- cgit v1.2.3-70-g09d2 From 9300c0c06788a409a97d54bbe3360d2f385fc621 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Thu, 21 Feb 2008 07:51:17 -0600 Subject: RDMA/nes: Resurrect error path dead code Adrian Bunk pointed out that a Coverity scan found some apparently dead code in nes_verbs.c that really shouldn't have been dead. The function nes_create_cq() was missing the assignment err = 1; just prior to an iteration that conditionally set err = 0 if a PBL was found for a given virtual CQ. I also noticed we should have been returning -EFAULT on a couple related error paths. Signed-off-by: Chien Tung Signed-off-by: Glenn Streiff Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_verbs.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 4dafbe16e82..201b95ee23c 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -1327,7 +1327,7 @@ static struct ib_qp *nes_create_qp(struct ib_pd *ibpd, (long long unsigned int)req.user_wqe_buffers); nes_free_resource(nesadapter, nesadapter->allocated_qps, qp_num); kfree(nesqp->allocated_buffer); - return ERR_PTR(-ENOMEM); + return ERR_PTR(-EFAULT); } } @@ -1674,6 +1674,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, } nes_debug(NES_DBG_CQ, "CQ Virtual Address = %08lX, size = %u.\n", (unsigned long)req.user_cq_buffer, entries); + err = 1; list_for_each_entry(nespbl, &nes_ucontext->cq_reg_mem_list, list) { if (nespbl->user_base == (unsigned long )req.user_cq_buffer) { list_del(&nespbl->list); @@ -1686,7 +1687,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, if (err) { nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num); kfree(nescq); - return ERR_PTR(err); + return ERR_PTR(-EFAULT); } pbl_entries = nespbl->pbl_size >> 3; -- cgit v1.2.3-70-g09d2 From 65b07ec29354b345ff93914d064c2467aef4c862 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 21 Feb 2008 08:01:18 -0600 Subject: RDMA/nes: Fix off-by-one Fix an off-by-one spotted by the Coverity checker. Signed-off-by: Adrian Bunk Signed-off-by: Glenn Streiff Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_verbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 201b95ee23c..692f0d82130 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -929,7 +929,7 @@ static struct ib_pd *nes_alloc_pd(struct ib_device *ibdev, NES_MAX_USER_DB_REGIONS, nesucontext->first_free_db); nes_debug(NES_DBG_PD, "find_first_zero_biton doorbells returned %u, mapping pd_id %u.\n", nespd->mmap_db_index, nespd->pd_id); - if (nespd->mmap_db_index > NES_MAX_USER_DB_REGIONS) { + if (nespd->mmap_db_index >= NES_MAX_USER_DB_REGIONS) { nes_debug(NES_DBG_PD, "mmap_db_index > MAX\n"); nes_free_resource(nesadapter, nesadapter->allocated_pds, pd_num); kfree(nespd); -- cgit v1.2.3-70-g09d2 From 24d10f0c37d301e88f6965e3dc0aa684311544e5 Mon Sep 17 00:00:00 2001 From: Adrian McMenamin Date: Sat, 16 Feb 2008 23:37:33 +0000 Subject: maple: remove unused variable Remove an unused variable from the definition of struct maple_device Signed-off-by: Adrian McMenamin Signed-off-by: Paul Mundt --- include/linux/maple.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/linux/maple.h b/include/linux/maple.h index 3f01e2bae1a..d31e36ebb43 100644 --- a/include/linux/maple.h +++ b/include/linux/maple.h @@ -64,7 +64,6 @@ struct maple_driver { int (*connect) (struct maple_device * dev); void (*disconnect) (struct maple_device * dev); struct device_driver drv; - int registered; }; void maple_getcond_callback(struct maple_device *dev, -- cgit v1.2.3-70-g09d2 From 4377e605e0b004a8d2049eac6cc89fbe1fdcdbb2 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Sun, 17 Feb 2008 15:38:35 +0100 Subject: sh: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2a/clock-sh7203.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c index 3feb95a4fcb..fb781329848 100644 --- a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c @@ -21,8 +21,8 @@ #include #include -const static int pll1rate[]={8,12,16,0}; -const static int pfc_divisors[]={1,2,3,4,6,8,12}; +static const int pll1rate[]={8,12,16,0}; +static const int pfc_divisors[]={1,2,3,4,6,8,12}; #define ifc_divisors pfc_divisors #if (CONFIG_SH_CLK_MD == 0) -- cgit v1.2.3-70-g09d2 From 1de83e94e6d4af22614c100b0c69716ab6eaa870 Mon Sep 17 00:00:00 2001 From: Roel Kluin <12o3l@tiscali.nl> Date: Mon, 18 Feb 2008 14:09:10 +0100 Subject: sh: heartbeat: ioremap is expected to succeed ioremap is expected to succeed Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Paul Mundt --- arch/sh/drivers/heartbeat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c index b76a14f12ce..ab77b0e0fa0 100644 --- a/arch/sh/drivers/heartbeat.c +++ b/arch/sh/drivers/heartbeat.c @@ -93,7 +93,7 @@ static int heartbeat_drv_probe(struct platform_device *pdev) } hd->base = ioremap_nocache(res->start, res->end - res->start + 1); - if (!unlikely(hd->base)) { + if (unlikely(!hd->base)) { dev_err(&pdev->dev, "ioremap failed\n"); if (!pdev->dev.platform_data) -- cgit v1.2.3-70-g09d2 From b7fd095602468ee501c5bcc3f9ca788cb3834096 Mon Sep 17 00:00:00 2001 From: Rafael Ignacio Zurita Date: Mon, 18 Feb 2008 22:32:58 -0300 Subject: sh: fix rtc_resources setup for sh770x Fix the RTC resources setup for sh770x. Whit these proper start values RTC driver (drivers/rtc/rtc-sh.c) works. Signed-off-by: Rafael Ignacio Zurita Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index 969804bb523..9066ed78e28 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -123,15 +123,15 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_IO, }, [1] = { - .start = 20, + .start = 21, .flags = IORESOURCE_IRQ, }, [2] = { - .start = 21, + .start = 22, .flags = IORESOURCE_IRQ, }, [3] = { - .start = 22, + .start = 20, .flags = IORESOURCE_IRQ, }, }; -- cgit v1.2.3-70-g09d2 From bd49666974a12f39eb9c74044e0b1753efcd94c4 Mon Sep 17 00:00:00 2001 From: Adrian McMenamin Date: Sun, 24 Feb 2008 14:30:23 +0000 Subject: maple: fix device detection The maple bus driver that went into the kernel mainline in September 2007 contained some bugs which were revealed by the update of the kobj code for the current release series. Unfortunately those bugs also helped ensure maple devices were properly detected. This patch (against the current git) now ensures that devices are properly detected again. (A previous attempt to fix this by delaying initialisation only partially fixed this - as became apparent when the bus was fully loaded) Signed-off-by: Adrian McMenamin Signed-off-by: Paul Mundt --- drivers/sh/maple/maple.c | 66 +++++++++++++++++++++++++++++++----------------- 1 file changed, 43 insertions(+), 23 deletions(-) diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c index 9cfcfd8dad5..617efb1640b 100644 --- a/drivers/sh/maple/maple.c +++ b/drivers/sh/maple/maple.c @@ -1,7 +1,7 @@ /* * Core maple bus functionality * - * Copyright (C) 2007 Adrian McMenamin + * Copyright (C) 2007, 2008 Adrian McMenamin * * Based on 2.4 code by: * @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include @@ -54,7 +53,7 @@ static struct device maple_bus; static int subdevice_map[MAPLE_PORTS]; static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr; static unsigned long maple_pnp_time; -static int started, scanning, liststatus, realscan; +static int started, scanning, liststatus, fullscan; static struct kmem_cache *maple_queue_cache; struct maple_device_specify { @@ -62,6 +61,9 @@ struct maple_device_specify { int unit; }; +static bool checked[4]; +static struct maple_device *baseunits[4]; + /** * maple_driver_register - register a device driver * automatically makes the driver bus a maple bus @@ -309,11 +311,9 @@ static void maple_attach_driver(struct maple_device *mdev) else break; - if (realscan) { - printk(KERN_INFO "Maple device detected: %s\n", - mdev->product_name); - printk(KERN_INFO "Maple device: %s\n", mdev->product_licence); - } + printk(KERN_INFO "Maple device detected: %s\n", + mdev->product_name); + printk(KERN_INFO "Maple device: %s\n", mdev->product_licence); function = be32_to_cpu(mdev->devinfo.function); @@ -323,10 +323,9 @@ static void maple_attach_driver(struct maple_device *mdev) mdev->driver = &maple_dummy_driver; sprintf(mdev->dev.bus_id, "%d:0.port", mdev->port); } else { - if (realscan) - printk(KERN_INFO - "Maple bus at (%d, %d): Function 0x%lX\n", - mdev->port, mdev->unit, function); + printk(KERN_INFO + "Maple bus at (%d, %d): Function 0x%lX\n", + mdev->port, mdev->unit, function); matched = bus_for_each_drv(&maple_bus_type, NULL, mdev, @@ -334,9 +333,8 @@ static void maple_attach_driver(struct maple_device *mdev) if (matched == 0) { /* Driver does not exist yet */ - if (realscan) - printk(KERN_INFO - "No maple driver found.\n"); + printk(KERN_INFO + "No maple driver found.\n"); mdev->driver = &maple_dummy_driver; } sprintf(mdev->dev.bus_id, "%d:0%d.%lX", mdev->port, @@ -472,9 +470,12 @@ static void maple_response_none(struct maple_device *mdev, maple_detach_driver(mdev); return; } - if (!started) { - printk(KERN_INFO "No maple devices attached to port %d\n", - mdev->port); + if (!started || !fullscan) { + if (checked[mdev->port] == false) { + checked[mdev->port] = true; + printk(KERN_INFO "No maple devices attached" + " to port %d\n", mdev->port); + } return; } maple_clean_submap(mdev); @@ -485,8 +486,14 @@ static void maple_response_devinfo(struct maple_device *mdev, char *recvbuf) { char submask; - if ((!started) || (scanning == 2)) { - maple_attach_driver(mdev); + if (!started || (scanning == 2) || !fullscan) { + if ((mdev->unit == 0) && (checked[mdev->port] == false)) { + checked[mdev->port] = true; + maple_attach_driver(mdev); + } else { + if (mdev->unit != 0) + maple_attach_driver(mdev); + } return; } if (mdev->unit == 0) { @@ -505,6 +512,7 @@ static void maple_dma_handler(struct work_struct *work) struct maple_device *dev; char *recvbuf; enum maple_code code; + int i; if (!maple_dma_done()) return; @@ -557,6 +565,19 @@ static void maple_dma_handler(struct work_struct *work) } else scanning = 0; + if (!fullscan) { + fullscan = 1; + for (i = 0; i < MAPLE_PORTS; i++) { + if (checked[i] == false) { + fullscan = 0; + dev = baseunits[i]; + dev->mq->command = + MAPLE_COMMAND_DEVINFO; + dev->mq->length = 0; + maple_add_packet(dev->mq); + } + } + } if (started == 0) started = 1; } @@ -694,7 +715,9 @@ static int __init maple_bus_init(void) /* setup maple ports */ for (i = 0; i < MAPLE_PORTS; i++) { + checked[i] = false; mdev[i] = maple_alloc_dev(i, 0); + baseunits[i] = mdev[i]; if (!mdev[i]) { while (i-- > 0) maple_free_dev(mdev[i]); @@ -703,12 +726,9 @@ static int __init maple_bus_init(void) mdev[i]->mq->command = MAPLE_COMMAND_DEVINFO; mdev[i]->mq->length = 0; maple_add_packet(mdev[i]->mq); - /* delay aids hardware detection */ - mdelay(5); subdevice_map[i] = 0; } - realscan = 1; /* setup maplebus hardware */ maplebus_dma_reset(); /* initial detection */ -- cgit v1.2.3-70-g09d2 From 763a495a022ac26afb2940e768e86725c1c7e8c9 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 26 Feb 2008 14:14:56 +0900 Subject: sh: revert dreamcast pci change Commit e036eaa681a17f71b64f6d9040fe605555623919 broke dreamcast pci, this patch fixes that by reverting the dreamcast specific bits. Signed-off-by: Magnus Damm Acked-by: Adrian McMenamin Signed-off-by: Andrew Morton Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/ops-dreamcast.c | 44 ++++++++++++++++++------------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index 0dac87b1962..e1284fc6936 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -83,9 +83,9 @@ static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int return PCIBIOS_DEVICE_NOT_FOUND; switch (size) { - case 1: *val = ctrl_inb(GAPSPCI_BBA_CONFIG+where); break; - case 2: *val = ctrl_inw(GAPSPCI_BBA_CONFIG+where); break; - case 4: *val = ctrl_inl(GAPSPCI_BBA_CONFIG+where); break; + case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break; + case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break; + case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break; } return PCIBIOS_SUCCESSFUL; @@ -97,9 +97,9 @@ static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int return PCIBIOS_DEVICE_NOT_FOUND; switch (size) { - case 1: ctrl_outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break; - case 2: ctrl_outw((u16)val, GAPSPCI_BBA_CONFIG+where); break; - case 4: ctrl_outl((u32)val, GAPSPCI_BBA_CONFIG+where); break; + case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break; + case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break; + case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break; } return PCIBIOS_SUCCESSFUL; @@ -127,36 +127,36 @@ int __init gapspci_init(void) */ for (i=0; i<16; i++) - idbuf[i] = ctrl_inb(GAPSPCI_REGS+i); + idbuf[i] = inb(GAPSPCI_REGS+i); if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16)) return -ENODEV; - ctrl_outl(0x5a14a501, GAPSPCI_REGS+0x18); + outl(0x5a14a501, GAPSPCI_REGS+0x18); for (i=0; i<1000000; i++) ; - if (ctrl_inl(GAPSPCI_REGS+0x18) != 1) + if (inl(GAPSPCI_REGS+0x18) != 1) return -EINVAL; - ctrl_outl(0x01000000, GAPSPCI_REGS+0x20); - ctrl_outl(0x01000000, GAPSPCI_REGS+0x24); + outl(0x01000000, GAPSPCI_REGS+0x20); + outl(0x01000000, GAPSPCI_REGS+0x24); - ctrl_outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28); - ctrl_outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c); + outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28); + outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c); - ctrl_outl(1, GAPSPCI_REGS+0x14); - ctrl_outl(1, GAPSPCI_REGS+0x34); + outl(1, GAPSPCI_REGS+0x14); + outl(1, GAPSPCI_REGS+0x34); /* Setting Broadband Adapter */ - ctrl_outw(0xf900, GAPSPCI_BBA_CONFIG+0x06); - ctrl_outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30); - ctrl_outb(0x00, GAPSPCI_BBA_CONFIG+0x3c); - ctrl_outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d); - ctrl_outw(0x0006, GAPSPCI_BBA_CONFIG+0x04); - ctrl_outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10); - ctrl_outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14); + outw(0xf900, GAPSPCI_BBA_CONFIG+0x06); + outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30); + outb(0x00, GAPSPCI_BBA_CONFIG+0x3c); + outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d); + outw(0x0006, GAPSPCI_BBA_CONFIG+0x04); + outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10); + outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14); return 0; } -- cgit v1.2.3-70-g09d2 From 8b1d16540c6ae4e62fcff56bd47794951b3ca87a Mon Sep 17 00:00:00 2001 From: Hideo Saito Date: Tue, 26 Feb 2008 14:28:48 +0900 Subject: sh: Fix up HAS_SR_RB typo in entry-macros. Signed-off-by: Hideo Saito Signed-off-by: Paul Mundt --- include/asm-sh/entry-macros.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-sh/entry-macros.S b/include/asm-sh/entry-macros.S index 500030eae7a..2dab0b8d945 100644 --- a/include/asm-sh/entry-macros.S +++ b/include/asm-sh/entry-macros.S @@ -12,7 +12,7 @@ not r11, r11 stc sr, r10 and r11, r10 -#ifdef CONFIG_HAS_SR_RB +#ifdef CONFIG_CPU_HAS_SR_RB stc k_g_imask, r11 or r11, r10 #endif @@ -20,7 +20,7 @@ .endm .macro get_current_thread_info, ti, tmp -#ifdef CONFIG_HAS_SR_RB +#ifdef CONFIG_CPU_HAS_SR_RB stc r7_bank, \ti #else mov #((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp -- cgit v1.2.3-70-g09d2 From 96de1a8f0275bd67f243833e7088baced518f873 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 26 Feb 2008 14:52:45 +0900 Subject: serial: Move asm-sh/sci.h to linux/serial_sci.h. This header is needed on other architectures as well (namely h8300), which currently fails to build without this in place. Rather than duplicating the port definition completely there, just move this to a common location instead. This should get h8300 working again for 2.6.25, in addition to the changes already pushed by Sato-san in -rc2. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2/setup-sh7619.c | 2 +- arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 2 +- arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 2 +- arch/sh/kernel/cpu/sh3/setup-sh7705.c | 2 +- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 2 +- arch/sh/kernel/cpu/sh3/setup-sh7710.c | 2 +- arch/sh/kernel/cpu/sh3/setup-sh7720.c | 2 +- arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 2 +- arch/sh/kernel/cpu/sh4/setup-sh7750.c | 2 +- arch/sh/kernel/cpu/sh4/setup-sh7760.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 2 +- arch/sh/kernel/cpu/sh4a/setup-shx3.c | 2 +- drivers/serial/sh-sci.c | 2 +- include/asm-sh/sci.h | 34 ---------------------------------- include/linux/serial_sci.h | 32 ++++++++++++++++++++++++++++++++ 21 files changed, 51 insertions(+), 53 deletions(-) delete mode 100644 include/asm-sh/sci.h create mode 100644 include/linux/serial_sci.h diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index b230eb278ce..cc530f4d84d 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include enum { UNUSED = 0, diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index db6ef5cecde..e98dc445035 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include enum { UNUSED = 0, diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index a564425b905..e6d4ec445dd 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include enum { UNUSED = 0, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index dd0a20a685f..f581534cb73 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include enum { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index 9066ed78e28..d3733b13ea5 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include enum { UNUSED = 0, diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 0cc0e2bf135..7406c9ad925 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include enum { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index 3855ea4c21c..8028082527c 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include #define INTC_ICR1 0xA4140010UL diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c index dab193293f2..7371abf64f8 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index ae3603aca61..ec884039b91 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include static struct resource rtc_resources[] = { [0] = { diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 85f81579b97..254c5c55ab9 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include enum { UNUSED = 0, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index c0a3f079dfd..6d4f50cd4aa 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 967e8b69a2f..f26b5cdad0d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 73c778d40d1..b98b4bc93ec 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -10,9 +10,9 @@ #include #include #include +#include #include #include -#include static struct resource usbf_resources[] = { [0] = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index eabd5386812..07c988dc9de 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include static struct resource rtc_resources[] = { [0] = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c index 32f4f59a837..b9cec48b180 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index 293004b526f..18dbbe23fea 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include static struct resource rtc_resources[] = { [0] = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 74b60e96cdf..621e7329ec6 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -10,10 +10,10 @@ #include #include #include +#include #include #include #include -#include static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c index 4dc958b6b31..bd35f32534b 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -10,9 +10,9 @@ #include #include #include +#include #include #include -#include static struct plat_sci_port sci_platform_data[] = { { diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 9ce12cb2ceb..a8c116b80bf 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -41,6 +41,7 @@ #include #include #include +#include #ifdef CONFIG_CPU_FREQ #include @@ -54,7 +55,6 @@ #include #endif -#include #include "sh-sci.h" struct sci_port { diff --git a/include/asm-sh/sci.h b/include/asm-sh/sci.h deleted file mode 100644 index 52e73660c12..00000000000 --- a/include/asm-sh/sci.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef __ASM_SH_SCI_H -#define __ASM_SH_SCI_H - -#include - -/* - * Generic header for SuperH SCI(F) - * - * Do not place SH-specific parts in here, sh64 and h8300 depend on this too. - */ - -/* Offsets into the sci_port->irqs array */ -enum { - SCIx_ERI_IRQ, - SCIx_RXI_IRQ, - SCIx_TXI_IRQ, - SCIx_BRI_IRQ, - SCIx_NR_IRQS, -}; - -/* - * Platform device specific platform_data struct - */ -struct plat_sci_port { - void __iomem *membase; /* io cookie */ - unsigned long mapbase; /* resource base */ - unsigned int irqs[SCIx_NR_IRQS]; /* ERI, RXI, TXI, BRI */ - unsigned int type; /* SCI / SCIF / IRDA */ - upf_t flags; /* UPF_* flags */ -}; - -int early_sci_setup(struct uart_port *port); - -#endif /* __ASM_SH_SCI_H */ diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h new file mode 100644 index 00000000000..893cc53486b --- /dev/null +++ b/include/linux/serial_sci.h @@ -0,0 +1,32 @@ +#ifndef __LINUX_SERIAL_SCI_H +#define __LINUX_SERIAL_SCI_H + +#include + +/* + * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts) + */ + +/* Offsets into the sci_port->irqs array */ +enum { + SCIx_ERI_IRQ, + SCIx_RXI_IRQ, + SCIx_TXI_IRQ, + SCIx_BRI_IRQ, + SCIx_NR_IRQS, +}; + +/* + * Platform device specific platform_data struct + */ +struct plat_sci_port { + void __iomem *membase; /* io cookie */ + unsigned long mapbase; /* resource base */ + unsigned int irqs[SCIx_NR_IRQS]; /* ERI, RXI, TXI, BRI */ + unsigned int type; /* SCI / SCIF / IRDA */ + upf_t flags; /* UPF_* flags */ +}; + +int early_sci_setup(struct uart_port *port); + +#endif /* __LINUX_SERIAL_SCI_H */ -- cgit v1.2.3-70-g09d2 From acbe44e6274e88a14a68df511d87890846a9bc99 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 26 Feb 2008 21:50:32 +0100 Subject: ide-cd: Enable audio play quirk for Optiarc DVD RW AD-5200A drive Reported-by: Stefan Bader Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 310e497b583..022a029f81c 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1931,6 +1931,7 @@ static const struct cd_list_entry ide_cd_quirks_list[] = { { "MATSHITADVD-ROM SR-8186", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK }, { "MATSHITADVD-ROM SR-8176", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK }, { "MATSHITADVD-ROM SR-8174", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK }, + { "Optiarc DVD RW AD-5200A", NULL, IDE_CD_FLAG_PLAY_AUDIO_OK }, { NULL, NULL, 0 } }; -- cgit v1.2.3-70-g09d2 From b66cae7672996c1ed0c4c4a4df04ce7b275c61f6 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Tue, 26 Feb 2008 21:50:33 +0100 Subject: hpt366: fix section mismatch warnings hpt366: fix section mismatch warnings Fix following warnings: WARNING: o-sparc64/vmlinux.o(.data+0x195a38): Section mismatch in reference from the variable hpt37x_info.0 to the variable .devinit.data:hpt370 WARNING: o-sparc64/vmlinux.o(.data+0x195a40): Section mismatch in reference from the variable hpt37x_info.0 to the variable .devinit.data:hpt370a WARNING: o-sparc64/vmlinux.o(.data+0x195a48): Section mismatch in reference from the variable hpt37x_info.0 to the variable .devinit.data:hpt372 WARNING: o-sparc64/vmlinux.o(.data+0x195a50): Section mismatch in reference from the variable hpt37x_info.0 to the variable .devinit.data:hpt372n Replace a static array with a small switch resulting in more readable code. Mark the pci table __devinitconst. A lot of variables are const but annotated __devinitdata. Annotating them __devinitconst would cause a section type conflict error when build for 64 bit powerpc. Signed-off-by: Sam Ravnborg Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/hpt366.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index d0f7bb8b8ad..6357bb6269a 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1570,10 +1570,12 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic if (rev < 3) info = &hpt36x; else { - static const struct hpt_info *hpt37x_info[] = - { &hpt370, &hpt370a, &hpt372, &hpt372n }; - - info = hpt37x_info[min_t(u8, rev, 6) - 3]; + switch (min_t(u8, rev, 6)) { + case 3: info = &hpt370; break; + case 4: info = &hpt370a; break; + case 5: info = &hpt372; break; + case 6: info = &hpt372n; break; + } idx++; } break; @@ -1626,7 +1628,7 @@ static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_devic return ide_setup_pci_device(dev, &d); } -static const struct pci_device_id hpt366_pci_tbl[] = { +static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = { { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), 0 }, { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), 1 }, { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), 2 }, -- cgit v1.2.3-70-g09d2 From cbd34d00af2960097ebd46a31dabc8bb9f16ea4e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 26 Feb 2008 21:50:33 +0100 Subject: ide: remove redundant comment from ide_unregister() Identical comment is present in ide_hwif_release_regions() documentation. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 477833f0daf..784d60e376e 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -590,11 +590,6 @@ void ide_unregister(unsigned int index, int init_default, int restore) hwif->extra_ports = 0; } - /* - * Note that we only release the standard ports, - * and do not even try to handle any extra ports - * allocated for weird IDE interface chipsets. - */ ide_hwif_release_regions(hwif); /* copy original settings */ -- cgit v1.2.3-70-g09d2 From c53ea18dc29a1ac075119f651d6ac4386a549a34 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 26 Feb 2008 21:50:34 +0100 Subject: ide: skip probing port if "hdx=noprobe" was used for both devices on it * Skip probing port if "hdx=noprobe" parameter was used for both devices on it. * Obsolete "idex=noprobe" parameter - it only works for ide_generic, cmd640 and PCI hosts in Compatibility mode (on alpha/x86/ia64/m32r/mips/ppc32). Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/ide.txt | 2 -- drivers/ide/ide-probe.c | 3 ++- drivers/ide/ide.c | 2 +- drivers/ide/pci/cmd640.c | 3 ++- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/ide.txt b/Documentation/ide.txt index 94e2e3b9e77..7b782e84001 100644 --- a/Documentation/ide.txt +++ b/Documentation/ide.txt @@ -258,8 +258,6 @@ Summary of ide driver parameters for kernel command line As for VLB, it is safest to not specify it. Bigger values are safer than smaller ones. - "idex=noprobe" : do not attempt to access/use this interface - "idex=base" : probe for an interface at the addr specified, where "base" is usually 0x1f0 or 0x170 and "ctl" is assumed to be "base"+0x206 diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 4a2cb286822..194ecb0049e 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -756,7 +756,8 @@ static int ide_probe_port(ide_hwif_t *hwif) BUG_ON(hwif->present); - if (hwif->noprobe) + if (hwif->noprobe || + (hwif->drives[0].noprobe && hwif->drives[1].noprobe)) return -EACCES; /* diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 784d60e376e..30053669762 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1444,7 +1444,7 @@ static int __init ide_setup(char *s) case -1: /* "noprobe" */ hwif->noprobe = 1; - goto done; + goto obsolete_option; case 1: /* base */ vals[1] = vals[0] + 0x206; /* default ctl */ diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index bd24dad3cfc..ec667982809 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -787,7 +787,8 @@ static int __init cmd640x_init(void) /* * Try to enable the secondary interface, if not already enabled */ - if (cmd_hwif1->noprobe) { + if (cmd_hwif1->noprobe || + (cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe)) { port2 = "not probed"; } else { b = get_cmd640_reg(CNTRL); -- cgit v1.2.3-70-g09d2 From 788d669736dd3d15195fea07bf97ec5a2e9f15e7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 26 Feb 2008 21:50:35 +0100 Subject: qd65xx: fix setup of QD6580 Control register Control register of QD6580 should be setup before probing for devices. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/qd65xx.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index bba29df5f21..1ec0e970f57 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -444,6 +444,8 @@ static int __init qd_probe(int base) printk(KERN_DEBUG "qd6580: config=%#x, control=%#x, ID3=%u\n", config, control, QD_ID3); + outb(QD_DEF_CONTR, QD_CONTROL_PORT); + if (control & QD_CONTR_SEC_DISABLED) { /* secondary disabled */ @@ -460,8 +462,6 @@ static int __init qd_probe(int base) ide_device_add(idx, &qd65xx_port_info); - outb(QD_DEF_CONTR, QD_CONTROL_PORT); - return 1; } else { ide_hwif_t *mate; @@ -487,8 +487,6 @@ static int __init qd_probe(int base) ide_device_add(idx, &qd65xx_port_info); - outb(QD_DEF_CONTR, QD_CONTROL_PORT); - return 0; /* no other qd65xx possible */ } } -- cgit v1.2.3-70-g09d2 From 9f10d9ee0ac6d79d7bc8b9a158bf4a29322d84d3 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 26 Feb 2008 21:50:35 +0100 Subject: ide-cd: fix 'ireason' handling for REQ_TYPE_ATA_PC requests Pass 'struct request *rq' to ide_cd_check_ireason() from cdrom_newpc_intr() and use ide_cd_check_ireason() also for REQ_TYPE_ATA_PC requests. This fixes some hangs caused by not finishing the transfer before ending the request and also makes use of 'ireason == 1' quirk for spurious IRQs. Tested-by: Brad Rosser Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 022a029f81c..1495fe7a6ec 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -670,8 +670,8 @@ static void cdrom_buffer_sectors (ide_drive_t *drive, unsigned long sector, * and attempt to recover if there are problems. Returns 0 if everything's * ok; nonzero if the request has been terminated. */ -static -int ide_cd_check_ireason(ide_drive_t *drive, int len, int ireason, int rw) +static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, + int len, int ireason, int rw) { /* * ireason == 0: the drive wants to receive data from us @@ -701,6 +701,9 @@ int ide_cd_check_ireason(ide_drive_t *drive, int len, int ireason, int rw) drive->name, __FUNCTION__, ireason); } + if (rq->cmd_type == REQ_TYPE_ATA_PC) + rq->cmd_flags |= REQ_FAILED; + cdrom_end_request(drive, 0); return -1; } @@ -1071,11 +1074,11 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) /* * check which way to transfer data */ - if (blk_fs_request(rq) || blk_pc_request(rq)) { - if (ide_cd_check_ireason(drive, len, ireason, write)) - return ide_stopped; + if (ide_cd_check_ireason(drive, rq, len, ireason, write)) + return ide_stopped; - if (blk_fs_request(rq) && write == 0) { + if (blk_fs_request(rq)) { + if (write == 0) { int nskip; if (ide_cd_check_transfer_size(drive, len)) { @@ -1101,16 +1104,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) if (ireason == 0) { write = 1; xferfunc = HWIF(drive)->atapi_output_bytes; - } else if (ireason == 2 || (ireason == 1 && - (blk_fs_request(rq) || blk_pc_request(rq)))) { + } else { write = 0; xferfunc = HWIF(drive)->atapi_input_bytes; - } else { - printk(KERN_ERR "%s: %s: The drive " - "appears confused (ireason = 0x%02x). " - "Trying to recover by ending request.\n", - drive->name, __FUNCTION__, ireason); - goto end_request; } /* -- cgit v1.2.3-70-g09d2 From bcd88ac3b2ff2eae3d0fa57a6b02d4fce5392f32 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Tue, 26 Feb 2008 21:50:35 +0100 Subject: ide-cd: fix CD/DVD burning Move counting of sense bytes into the transfer loop. Signed-off-by: Andreas Schwab Acked-by: Borislav Petkov Cc: Kiyoshi Ueda Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 1495fe7a6ec..c8d0e871599 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1178,11 +1178,10 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) else rq->data += blen; } + if (!write && blk_sense_request(rq)) + rq->sense_len += blen; } - if (write && blk_sense_request(rq)) - rq->sense_len += thislen; - /* * pad, if necessary */ -- cgit v1.2.3-70-g09d2 From dbecebca1914f414008553b57aefde95b70f9142 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 26 Feb 2008 21:50:35 +0100 Subject: ide: fix sparse warning about shadowing 'flags' symbol drivers/ide/ide.c:801:18: warning: symbol 'flags' shadows an earlier one drivers/ide/ide.c:732:16: originally declared here Also fix some whitespace damage while at it. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 30053669762..fa16bc30bbc 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1031,10 +1031,9 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device drive->nice1 = (arg >> IDE_NICE_1) & 1; return 0; case HDIO_DRIVE_RESET: - { - unsigned long flags; - if (!capable(CAP_SYS_ADMIN)) return -EACCES; - + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + /* * Abort the current command on the * group if there is one, taking @@ -1053,17 +1052,15 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device ide_abort(drive, "drive reset"); BUG_ON(HWGROUP(drive)->handler); - + /* Ensure nothing gets queued after we drop the lock. Reset will clear the busy */ - + HWGROUP(drive)->busy = 1; spin_unlock_irqrestore(&ide_lock, flags); (void) ide_do_reset(drive); return 0; - } - case HDIO_GET_BUSSTATE: if (!capable(CAP_SYS_ADMIN)) return -EACCES; -- cgit v1.2.3-70-g09d2 From d12faa2736ebdee025a9aa07b2683c5fa8c86553 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 26 Feb 2008 21:50:36 +0100 Subject: ide-disk: add missing printk() KERN_* levels Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 8f5bed47105..39501d13025 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -867,7 +867,7 @@ static void idedisk_setup (ide_drive_t *drive) /* Only print cache size when it was specified */ if (id->buf_size) - printk (" w/%dKiB Cache", id->buf_size/2); + printk(KERN_CONT " w/%dKiB Cache", id->buf_size / 2); printk(KERN_CONT ", CHS=%d/%d/%d\n", drive->bios_cyl, drive->bios_head, drive->bios_sect); @@ -949,7 +949,8 @@ static void ide_device_shutdown(ide_drive_t *drive) return; } - printk("Shutdown: %s\n", drive->name); + printk(KERN_INFO "Shutdown: %s\n", drive->name); + drive->gendev.bus->suspend(&drive->gendev, PMSG_SUSPEND); } -- cgit v1.2.3-70-g09d2 From d48567dd43868b3d2e1fcc33ee76dc2d38a1ddeb Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 26 Feb 2008 21:50:36 +0100 Subject: ide-tape: schedule driver for removal after 6 months Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/feature-removal-schedule.txt | 10 ++++++++++ drivers/ide/ide-tape.c | 5 +++++ 2 files changed, 15 insertions(+) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 4d3aa519ead..ba899ff2a8f 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -172,6 +172,16 @@ Who: Len Brown --------------------------- +What: ide-tape driver +When: July 2008 +Files: drivers/ide/ide-tape.c +Why: This driver might not have any users anymore and maintaining it for no + reason is an effort no one wants to make. +Who: Bartlomiej Zolnierkiewicz , Borislav Petkov + + +--------------------------- + What: libata spindown skipping and warning When: Dec 2008 Why: Some halt(8) implementations synchronize caches for and spin diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 0598ecfd5f3..43e0e055777 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -3765,6 +3765,11 @@ static int ide_tape_probe(ide_drive_t *drive) g->fops = &idetape_block_ops; ide_register_region(g); + printk(KERN_WARNING "It is possible that this driver does not have any" + " users anymore and, as a result, it will be REMOVED soon." + " Please notify Bart or Boris" + " in case you still need it.\n"); + return 0; out_free_tape: -- cgit v1.2.3-70-g09d2 From fcac6f87a5642ab16fe3deab11e57252dacf4d55 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 26 Feb 2008 21:50:36 +0100 Subject: qd65xx: remove commented out code Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/qd65xx.c | 37 ------------------------------------- 1 file changed, 37 deletions(-) diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 1ec0e970f57..2f4f47ad602 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -334,43 +334,6 @@ static void __init qd6580_port_init_devs(ide_hwif_t *hwif) hwif->drives[1].drive_data = t2; } -/* - * qd_unsetup: - * - * called to unsetup an ata channel : back to default values, unlinks tuning - */ -/* -static void __exit qd_unsetup(ide_hwif_t *hwif) -{ - u8 config = hwif->config_data; - int base = hwif->select_data; - void *set_pio_mode = (void *)hwif->set_pio_mode; - - if (hwif->chipset != ide_qd65xx) - return; - - printk(KERN_NOTICE "%s: back to defaults\n", hwif->name); - - hwif->selectproc = NULL; - hwif->set_pio_mode = NULL; - - if (set_pio_mode == (void *)qd6500_set_pio_mode) { - // will do it for both - outb(QD6500_DEF_DATA, QD_TIMREG(&hwif->drives[0])); - } else if (set_pio_mode == (void *)qd6580_set_pio_mode) { - if (QD_CONTROL(hwif) & QD_CONTR_SEC_DISABLED) { - outb(QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0])); - outb(QD6580_DEF_DATA2, QD_TIMREG(&hwif->drives[1])); - } else { - outb(hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA, QD_TIMREG(&hwif->drives[0])); - } - } else { - printk(KERN_WARNING "Unknown qd65xx tuning fonction !\n"); - printk(KERN_WARNING "keeping settings !\n"); - } -} -*/ - static const struct ide_port_info qd65xx_port_info __initdata = { .chipset = ide_qd65xx, .host_flags = IDE_HFLAG_IO_32BIT | -- cgit v1.2.3-70-g09d2 From 56467d17d205368f857e194858ea69368a1cfec2 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 26 Feb 2008 21:50:36 +0100 Subject: ide: remove ide-tape documentation from Documentation/ide.txt More complete documentation is available in Documentation/ide/ide-tape.txt. Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/ide.txt | 47 ----------------------------------------------- 1 file changed, 47 deletions(-) diff --git a/Documentation/ide.txt b/Documentation/ide.txt index 7b782e84001..bcd7cd1278e 100644 --- a/Documentation/ide.txt +++ b/Documentation/ide.txt @@ -305,53 +305,6 @@ Also for legacy CMD640 host driver (cmd640) you need to use "probe_vlb" kernel paremeter to enable probing for VLB version of the chipset (PCI ones are detected automatically). -================================================================================ - -IDE ATAPI streaming tape driver -------------------------------- - -This driver is a part of the Linux ide driver and works in co-operation -with linux/drivers/block/ide.c. - -The driver, in co-operation with ide.c, basically traverses the -request-list for the block device interface. The character device -interface, on the other hand, creates new requests, adds them -to the request-list of the block device, and waits for their completion. - -Pipelined operation mode is now supported on both reads and writes. - -The block device major and minor numbers are determined from the -tape's relative position in the ide interfaces, as explained in ide.c. - -The character device interface consists of the following devices: - - ht0 major 37, minor 0 first IDE tape, rewind on close. - ht1 major 37, minor 1 second IDE tape, rewind on close. - ... - nht0 major 37, minor 128 first IDE tape, no rewind on close. - nht1 major 37, minor 129 second IDE tape, no rewind on close. - ... - -Run /dev/MAKEDEV to create the above entries. - -The general magnetic tape commands compatible interface, as defined by -include/linux/mtio.h, is accessible through the character device. - -General ide driver configuration options, such as the interrupt-unmask -flag, can be configured by issuing an ioctl to the block device interface, -as any other ide device. - -Our own ide-tape ioctl's can be issued to either the block device or -the character device interface. - -Maximal throughput with minimal bus load will usually be achieved in the -following scenario: - - 1. ide-tape is operating in the pipelined operation mode. - 2. No buffering is performed by the user backup program. - - - ================================================================================ Some Terminology -- cgit v1.2.3-70-g09d2 From 204f47c5a581630369d425b5a4afa48448c30359 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 26 Feb 2008 21:50:36 +0100 Subject: ide: remove stale comments from ide-dma.c (take 2) - ide-dma.c is not a separate module - ide-dma.c is not PCI specific anymore - DMA is enabled by default nowadays - link for Intel Zappa BIOS is dead etc. v2: * Some comments should be preserved. (Noticed by Mark Lord) Cc: Mark Lord Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-dma.c | 52 ++++----------------------------------------------- 1 file changed, 4 insertions(+), 48 deletions(-) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index d0e7b537353..2de99e4be5c 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -1,9 +1,13 @@ /* + * IDE DMA support (including IDE PCI BM-DMA). + * * Copyright (C) 1995-1998 Mark Lord * Copyright (C) 1999-2000 Andre Hedrick * Copyright (C) 2004, 2007 Bartlomiej Zolnierkiewicz * * May be copied or modified under the terms of the GNU General Public License + * + * DMA is supported for all IDE devices (disk drives, cdroms, tapes, floppies). */ /* @@ -11,49 +15,6 @@ */ /* - * This module provides support for the bus-master IDE DMA functions - * of various PCI chipsets, including the Intel PIIX (i82371FB for - * the 430 FX chipset), the PIIX3 (i82371SB for the 430 HX/VX and - * 440 chipsets), and the PIIX4 (i82371AB for the 430 TX chipset) - * ("PIIX" stands for "PCI ISA IDE Xcellerator"). - * - * Pretty much the same code works for other IDE PCI bus-mastering chipsets. - * - * DMA is supported for all IDE devices (disk drives, cdroms, tapes, floppies). - * - * By default, DMA support is prepared for use, but is currently enabled only - * for drives which already have DMA enabled (UltraDMA or mode 2 multi/single), - * or which are recognized as "good" (see table below). Drives with only mode0 - * or mode1 (multi/single) DMA should also work with this chipset/driver - * (eg. MC2112A) but are not enabled by default. - * - * Use "hdparm -i" to view modes supported by a given drive. - * - * The hdparm-3.5 (or later) utility can be used for manually enabling/disabling - * DMA support, but must be (re-)compiled against this kernel version or later. - * - * To enable DMA, use "hdparm -d1 /dev/hd?" on a per-drive basis after booting. - * If problems arise, ide.c will disable DMA operation after a few retries. - * This error recovery mechanism works and has been extremely well exercised. - * - * IDE drives, depending on their vintage, may support several different modes - * of DMA operation. The boot-time modes are indicated with a "*" in - * the "hdparm -i" listing, and can be changed with *knowledgeable* use of - * the "hdparm -X" feature. There is seldom a need to do this, as drives - * normally power-up with their "best" PIO/DMA modes enabled. - * - * Testing has been done with a rather extensive number of drives, - * with Quantum & Western Digital models generally outperforming the pack, - * and Fujitsu & Conner (and some Seagate which are really Conner) drives - * showing more lackluster throughput. - * - * Keep an eye on /var/adm/messages for "DMA disabled" messages. - * - * Some people have reported trouble with Intel Zappa motherboards. - * This can be fixed by upgrading the AMI BIOS to version 1.00.04.BS0, - * available from ftp://ftp.intel.com/pub/bios/10004bs0.exe - * (thanks to Glen Morrell for researching this). - * * Thanks to "Christopher J. Reimer" for * fixing the problem with the BIOS on some Acer motherboards. * @@ -65,11 +26,6 @@ * * Most importantly, thanks to Robert Bringman * for supplying a Promise UDMA board & WD UDMA drive for this work! - * - * And, yes, Intel Zappa boards really *do* use both PIIX IDE ports. - * - * ATA-66/100 and recovery functions, I forgot the rest...... - * */ #include -- cgit v1.2.3-70-g09d2 From ed0ba33d64fb933f5fd985aa8f641984efd9d658 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 21 Feb 2008 08:12:06 -0600 Subject: RDMA/nes: Fix a memory leak in schedule_nes_timer() Fix a memory leak spotted by the Coverity checker. Signed-off-by: Adrian Bunk Signed-off-by: Glenn Streiff Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_cm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index bd5cfeaac20..78e845c9457 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -370,11 +370,11 @@ int schedule_nes_timer(struct nes_cm_node *cm_node, struct sk_buff *skb, int ret = 0; u32 was_timer_set; + if (!cm_node) + return -EINVAL; new_send = kzalloc(sizeof(*new_send), GFP_ATOMIC); if (!new_send) return -1; - if (!cm_node) - return -EINVAL; /* new_send->timetosend = currenttime */ new_send->retrycount = NES_DEFAULT_RETRYS; -- cgit v1.2.3-70-g09d2 From a4435febd4c0f14b25159dca249ecf91301c7c76 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 21 Feb 2008 08:13:47 -0600 Subject: RDMA/nes: Fix a check-after-use in nes_probe() Fix a check-after-use spotted by the Coverity checker. Signed-off-by: Adrian Bunk Signed-off-by: Glenn Streiff Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index 7f8853b44ee..b2112f5a422 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -567,12 +567,12 @@ static int __devinit nes_probe(struct pci_dev *pcidev, const struct pci_device_i /* Init the adapter */ nesdev->nesadapter = nes_init_adapter(nesdev, hw_rev); - nesdev->nesadapter->et_rx_coalesce_usecs_irq = interrupt_mod_interval; if (!nesdev->nesadapter) { printk(KERN_ERR PFX "Unable to initialize adapter.\n"); ret = -ENOMEM; goto bail5; } + nesdev->nesadapter->et_rx_coalesce_usecs_irq = interrupt_mod_interval; /* nesdev->base_doorbell_index = nesdev->nesadapter->pd_config_base[PCI_FUNC(nesdev->pcidev->devfn)]; */ -- cgit v1.2.3-70-g09d2 From f84fba6f969065c6622669bbaa955c26fc1461ae Mon Sep 17 00:00:00 2001 From: Glenn Streiff Date: Thu, 21 Feb 2008 08:17:54 -0600 Subject: RDMA/nes: Fix use-after-free in nes_create_cq() Just delete the debugging statement so we don't use cqp_request after freeing it. Adrian Bunk flagged this use-after-free issue spotted by the Coverity checker. Signed-off-by: Glenn Streiff Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_verbs.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 692f0d82130..a651e9d9f0e 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -1832,9 +1832,6 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, spin_unlock_irqrestore(&nesdev->cqp.lock, flags); } } - nes_debug(NES_DBG_CQ, "iWARP CQ%u create timeout expired, major code = 0x%04X," - " minor code = 0x%04X\n", - nescq->hw_cq.cq_number, cqp_request->major_code, cqp_request->minor_code); if (!context) pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem, nescq->hw_cq.cq_pbase); -- cgit v1.2.3-70-g09d2 From a2e9c384ce76993cd68d6de57eaa81985b4618e3 Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Thu, 21 Feb 2008 08:27:32 -0600 Subject: RDMA/nes: Fix use-after-free in mini_cm_dec_refcnt_listen() Fix use-after-free spotted by Coverity checker flagged by Adrian Bunk. Signed-off-by: Faisal Latif Signed-off-by: Glenn Streiff Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_cm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 78e845c9457..6c298aa9ab0 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -947,6 +947,7 @@ static int mini_cm_dec_refcnt_listen(struct nes_cm_core *cm_core, nes_debug(NES_DBG_CM, "destroying listener (%p)\n", listener); kfree(listener); + listener = NULL; ret = 0; cm_listens_destroyed++; } else { -- cgit v1.2.3-70-g09d2 From 30da7cff87f0ffa169fe07b766c3d6a5f6d1f6ab Mon Sep 17 00:00:00 2001 From: Faisal Latif Date: Thu, 21 Feb 2008 08:31:22 -0600 Subject: RDMA/nes: Fix CRC endianness for RDMA connection establishment on big-endian With commit ef19454b ("[LIB] crc32c: Keep intermediate crc state in cpu order"), the behavior of crc32c changes on big-endian platforms. Our algorithm expects the previous behavior; otherwise we have RDMA connection establishment failure on big-endian platforms like powerpc. Apply cpu_to_le32() to value returned by crc32c() to get the previous behavior. Signed-off-by: Faisal Latif Signed-off-by: Glenn Streiff Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes.h | 15 +++++++++++++++ drivers/infiniband/hw/nes/nes_cm.c | 10 ++++++---- 2 files changed, 21 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h index fd57e8a1582..a48b288618e 100644 --- a/drivers/infiniband/hw/nes/nes.h +++ b/drivers/infiniband/hw/nes/nes.h @@ -285,6 +285,21 @@ struct nes_device { }; +static inline __le32 get_crc_value(struct nes_v4_quad *nes_quad) +{ + u32 crc_value; + crc_value = crc32c(~0, (void *)nes_quad, sizeof (struct nes_v4_quad)); + + /* + * With commit ef19454b ("[LIB] crc32c: Keep intermediate crc + * state in cpu order"), behavior of crc32c changes on + * big-endian platforms. Our algorithm expects the previous + * behavior; otherwise we have RDMA connection establishment + * issue on big-endian. + */ + return cpu_to_le32(crc_value); +} + static inline void set_wqe_64bit_value(__le32 *wqe_words, u32 index, u64 value) { diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 6c298aa9ab0..39adb267fb1 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -2320,6 +2320,7 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) struct iw_cm_event cm_event; struct nes_hw_qp_wqe *wqe; struct nes_v4_quad nes_quad; + u32 crc_value; int ret; ibqp = nes_get_qp(cm_id->device, conn_param->qpn); @@ -2436,8 +2437,8 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) nes_quad.TcpPorts[1] = cm_id->local_addr.sin_port; /* Produce hash key */ - nesqp->hte_index = cpu_to_be32( - crc32c(~0, (void *)&nes_quad, sizeof(nes_quad)) ^ 0xffffffff); + crc_value = get_crc_value(&nes_quad); + nesqp->hte_index = cpu_to_be32(crc_value ^ 0xffffffff); nes_debug(NES_DBG_CM, "HTE Index = 0x%08X, CRC = 0x%08X\n", nesqp->hte_index, nesqp->hte_index & adapter->hte_index_mask); @@ -2751,6 +2752,7 @@ void cm_event_connected(struct nes_cm_event *event) struct iw_cm_event cm_event; struct nes_hw_qp_wqe *wqe; struct nes_v4_quad nes_quad; + u32 crc_value; int ret; /* get all our handles */ @@ -2828,8 +2830,8 @@ void cm_event_connected(struct nes_cm_event *event) nes_quad.TcpPorts[1] = cm_id->local_addr.sin_port; /* Produce hash key */ - nesqp->hte_index = cpu_to_be32( - crc32c(~0, (void *)&nes_quad, sizeof(nes_quad)) ^ 0xffffffff); + crc_value = get_crc_value(&nes_quad); + nesqp->hte_index = cpu_to_be32(crc_value ^ 0xffffffff); nes_debug(NES_DBG_CM, "HTE Index = 0x%08X, After CRC = 0x%08X\n", nesqp->hte_index, nesqp->hte_index & nesadapter->hte_index_mask); -- cgit v1.2.3-70-g09d2 From 4b1cc7e7ca5715907d17619dcb49144db6efe1c9 Mon Sep 17 00:00:00 2001 From: John Lacombe Date: Thu, 21 Feb 2008 08:34:58 -0600 Subject: RDMA/nes: Fix interrupt moderation low threshold Interrupt moderation low threshold value was incorrectly triggering, indicating that the threshold should be lowered. The impact was the timer was likely to become 40usecs and get stuck there. The biggest side effect was too many interrupts and nonoptimal performance. Signed-off-by: John Lacombe Signed-off-by: Glenn Streiff Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_hw.c | 13 +++++-------- drivers/infiniband/hw/nes/nes_hw.h | 2 +- 2 files changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index 7c4c0fbf0ab..49e53e4c1eb 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -156,15 +156,14 @@ static void nes_nic_tune_timer(struct nes_device *nesdev) spin_lock_irqsave(&nesadapter->periodic_timer_lock, flags); - if (shared_timer->cq_count_old < cq_count) { - if (cq_count > shared_timer->threshold_low) - shared_timer->cq_direction_downward=0; - } - if (shared_timer->cq_count_old >= cq_count) + if (shared_timer->cq_count_old <= cq_count) + shared_timer->cq_direction_downward = 0; + else shared_timer->cq_direction_downward++; shared_timer->cq_count_old = cq_count; if (shared_timer->cq_direction_downward > NES_NIC_CQ_DOWNWARD_TREND) { - if (cq_count <= shared_timer->threshold_low) { + if (cq_count <= shared_timer->threshold_low && + shared_timer->threshold_low > 4) { shared_timer->threshold_low = shared_timer->threshold_low/2; shared_timer->cq_direction_downward=0; nesdev->currcq_count = 0; @@ -1728,7 +1727,6 @@ int nes_napi_isr(struct nes_device *nesdev) nesdev->int_req &= ~NES_INT_TIMER; nes_write32(nesdev->regs+NES_INTF_INT_MASK, ~(nesdev->intf_int_req)); nes_write32(nesdev->regs+NES_INT_MASK, ~nesdev->int_req); - nesadapter->tune_timer.timer_in_use_old = 0; } nesdev->deepcq_count = 0; return 1; @@ -1867,7 +1865,6 @@ void nes_dpc(unsigned long param) nesdev->int_req &= ~NES_INT_TIMER; nes_write32(nesdev->regs + NES_INTF_INT_MASK, ~(nesdev->intf_int_req)); nes_write32(nesdev->regs+NES_INT_MASK, ~nesdev->int_req); - nesdev->nesadapter->tune_timer.timer_in_use_old = 0; } else { nes_write32(nesdev->regs+NES_INT_MASK, 0x0000ffff|(~nesdev->int_req)); } diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h index 1e10df550c9..b7e2844f096 100644 --- a/drivers/infiniband/hw/nes/nes_hw.h +++ b/drivers/infiniband/hw/nes/nes_hw.h @@ -962,7 +962,7 @@ struct nes_arp_entry { #define DEFAULT_JUMBO_NES_QL_LOW 12 #define DEFAULT_JUMBO_NES_QL_TARGET 40 #define DEFAULT_JUMBO_NES_QL_HIGH 128 -#define NES_NIC_CQ_DOWNWARD_TREND 8 +#define NES_NIC_CQ_DOWNWARD_TREND 16 struct nes_hw_tune_timer { //u16 cq_count; -- cgit v1.2.3-70-g09d2 From 030f1b2f5d880c1ad3d7e0b71fc383f00f38f8f7 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 21 Feb 2008 09:02:41 -0600 Subject: MAINTAINERS: neteffect update Adding Nishi to the maintainers list. Signed-off-by: Glenn Streiff Signed-off-by: Roland Dreier --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 36c7bc641db..4fc5f0aee6a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2744,6 +2744,8 @@ S: Maintained NETEFFECT IWARP RNIC DRIVER (IW_NES) P: Faisal Latif M: flatif@neteffect.com +P: Nishi Gupta +M: ngupta@neteffect.com P: Glenn Streiff M: gstreiff@neteffect.com L: general@lists.openfabrics.org -- cgit v1.2.3-70-g09d2 From b2d7c7f7a69fd953626c3e507bac70e18b21f70e Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 26 Feb 2008 21:42:11 +0100 Subject: arch/sh/drivers/dma/dma-sh.c: Correct use of ! and & In commit e6bafba5b4765a5a252f1b8d31cbf6d2459da337, a bug was fixed that involved converting !x & y to !(x & y). The code below shows the same pattern, and thus should perhaps be fixed in the same way. This is not tested and clearly changes the semantics, so it is only something to consider. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression E1,E2; @@ ( !E1 & !E2 | - !E1 & E2 + !(E1 & E2) ) // Signed-off-by: Julia Lawall Signed-off-by: Paul Mundt --- arch/sh/drivers/dma/dma-sh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 5c3359756a9..71ff3d6f26e 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -90,7 +90,7 @@ static irqreturn_t dma_tei(int irq, void *dev_id) static int sh_dmac_request_dma(struct dma_channel *chan) { - if (unlikely(!chan->flags & DMA_TEI_CAPABLE)) + if (unlikely(!(chan->flags & DMA_TEI_CAPABLE))) return 0; return request_irq(get_dmte_irq(chan->chan), dma_tei, -- cgit v1.2.3-70-g09d2 From 622eaec613130e6ea78f2a5d5070e3278b21cd8f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 26 Feb 2008 17:30:02 -0800 Subject: [SPARC64]: Loosen checks in exception table handling. Some parts of the kernel now do things like do *_user() accesses while set_fs(KERNEL_DS) that fault on purpose. See, for example, the code added by changeset a0c1e9073ef7428a14309cba010633a6cd6719ea ("futex: runtime enable pi and robust functionality"). That trips up the ASI sanity checking we make in do_kernel_fault(). Just remove it for now. Maybe we can add it back later with an added conditional which looks at the current get_fs() value. Signed-off-by: David S. Miller --- arch/sparc64/mm/fault.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c index e2027f27c0f..91836336028 100644 --- a/arch/sparc64/mm/fault.c +++ b/arch/sparc64/mm/fault.c @@ -244,16 +244,8 @@ static void do_kernel_fault(struct pt_regs *regs, int si_code, int fault_code, if (regs->tstate & TSTATE_PRIV) { const struct exception_table_entry *entry; - if (asi == ASI_P && (insn & 0xc0800000) == 0xc0800000) { - if (insn & 0x2000) - asi = (regs->tstate >> 24); - else - asi = (insn >> 5); - } - - /* Look in asi.h: All _S asis have LS bit set */ - if ((asi & 0x1) && - (entry = search_exception_tables(regs->tpc))) { + entry = search_exception_tables(regs->tpc); + if (entry) { regs->tpc = entry->fixup; regs->tnpc = regs->tpc + 4; return; -- cgit v1.2.3-70-g09d2 From 3ab2273175bd59616b6e85c0f88b154e8bd97413 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 26 Feb 2008 17:42:56 -0800 Subject: bluetooth: delete timer in l2cap_conn_del() Delete a possibly armed timer before kfree'ing the connection object. Solves: http://lkml.org/lkml/2008/2/15/514 Reported-by:Quel Qun Signed-off-by: Thomas Gleixner Signed-off-by: David S. Miller --- net/bluetooth/l2cap.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index a8811c0a0ce..7c5459c8e8e 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -417,6 +417,8 @@ static void l2cap_conn_del(struct hci_conn *hcon, int err) l2cap_sock_kill(sk); } + del_timer_sync(&conn->info_timer); + hcon->l2cap_data = NULL; kfree(conn); } -- cgit v1.2.3-70-g09d2 From 3dbf8d56a2b7e0d738950daa16682e1e6dafb28b Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 26 Feb 2008 17:52:05 -0800 Subject: [MACVLAN]: Update Kconfig to refer to iproute Since the macvlan release I had at least 5 users asking how to configure it since the old userspace tool doesn't work with the version in the kernel. Add a pointer to the Kconfig help. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- drivers/net/Kconfig | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index f337800076c..a20e72f5ad2 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -90,6 +90,11 @@ config MACVLAN This allows one to create virtual interfaces that map packets to or from specific MAC addresses to a particular interface. + Macvlan devices can be added using the "ip" command from the + iproute2 package starting with the iproute2-2.6.23 release: + + "ip link add link [ address MAC ] [ NAME ] type macvlan" + To compile this driver as a module, choose M here: the module will be called macvlan. -- cgit v1.2.3-70-g09d2 From f1243c2db6e3b8e5a602b1be2d256b582fc78ce4 Mon Sep 17 00:00:00 2001 From: Benjamin Thery Date: Tue, 26 Feb 2008 18:10:03 -0800 Subject: [IPV6]: Add missing initializations of the new nl_info.nl_net field Add some more missing initializations of the new nl_info.nl_net field in IPv6 stack. This field will be used when network namespaces are fully supported. Signed-off-by: Benjamin Thery Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 3 +++ net/ipv6/route.c | 2 ++ 2 files changed, 5 insertions(+) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index e40213db9e4..101e0e70ba2 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1557,6 +1557,7 @@ addrconf_prefix_route(struct in6_addr *pfx, int plen, struct net_device *dev, .fc_expires = expires, .fc_dst_len = plen, .fc_flags = RTF_UP | flags, + .fc_nlinfo.nl_net = &init_net, }; ipv6_addr_copy(&cfg.fc_dst, pfx); @@ -1583,6 +1584,7 @@ static void addrconf_add_mroute(struct net_device *dev) .fc_ifindex = dev->ifindex, .fc_dst_len = 8, .fc_flags = RTF_UP, + .fc_nlinfo.nl_net = &init_net, }; ipv6_addr_set(&cfg.fc_dst, htonl(0xFF000000), 0, 0, 0); @@ -1599,6 +1601,7 @@ static void sit_route_add(struct net_device *dev) .fc_ifindex = dev->ifindex, .fc_dst_len = 96, .fc_flags = RTF_UP | RTF_NONEXTHOP, + .fc_nlinfo.nl_net = &init_net, }; /* prefix length - 96 bits "::d.d.d.d" */ diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 6e7b56ef444..e8b241cb60b 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1719,6 +1719,8 @@ static void rtmsg_to_fib6_config(struct in6_rtmsg *rtmsg, cfg->fc_src_len = rtmsg->rtmsg_src_len; cfg->fc_flags = rtmsg->rtmsg_flags; + cfg->fc_nlinfo.nl_net = &init_net; + ipv6_addr_copy(&cfg->fc_dst, &rtmsg->rtmsg_dst); ipv6_addr_copy(&cfg->fc_src, &rtmsg->rtmsg_src); ipv6_addr_copy(&cfg->fc_gateway, &rtmsg->rtmsg_gateway); -- cgit v1.2.3-70-g09d2 From 148f97292e8fa2c35fcef60a7725cf1b073d6818 Mon Sep 17 00:00:00 2001 From: Bjorn Mork Date: Tue, 26 Feb 2008 18:17:53 -0800 Subject: [IPV4]: Reset scope when changing address This bug did bite at least one user, who did have to resort to rebooting the system after an "ifconfig eth0 127.0.0.1" typo. Deleting the address and adding a new is a less intrusive workaround. But I still beleive this is a bug that should be fixed. Some way or another. Another possibility would be to remove the scope mangling based on address. This will always be incomplete (are 127/8 the only address space with host scope requirements?) We set the scope to RT_SCOPE_HOST if an IPv4 interface is configured with a loopback address (127/8). The scope is never reset, and will remain set to RT_SCOPE_HOST after changing the address. This patch resets the scope if the address is changed again, to restore normal functionality. Signed-off-by: Bjorn Mork Signed-off-by: David S. Miller --- net/ipv4/devinet.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index f282b26f63e..87490f7bb0f 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -752,6 +752,7 @@ int devinet_ioctl(unsigned int cmd, void __user *arg) inet_del_ifa(in_dev, ifap, 0); ifa->ifa_broadcast = 0; ifa->ifa_anycast = 0; + ifa->ifa_scope = 0; } ifa->ifa_address = ifa->ifa_local = sin->sin_addr.s_addr; -- cgit v1.2.3-70-g09d2 From 78374676efae525094aee45c0aab4bcab95ea9d1 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 26 Feb 2008 18:25:53 -0800 Subject: CONNECTOR: make cn_already_initialized static It is used in connector.c only, so make it static. Signed-off-by: Li Zefan Signed-off-by: David S. Miller --- drivers/connector/connector.c | 2 +- include/linux/connector.h | 2 -- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index fea2d3ed9cb..85e2ba7fcfb 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -47,7 +47,7 @@ static LIST_HEAD(notify_list); static struct cn_dev cdev; -int cn_already_initialized = 0; +static int cn_already_initialized; /* * msg->seq and msg->ack are used to determine message genealogy. diff --git a/include/linux/connector.h b/include/linux/connector.h index da6dd957f90..96a89d3d672 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -170,7 +170,5 @@ int cn_cb_equal(struct cb_id *, struct cb_id *); void cn_queue_wrapper(struct work_struct *work); -extern int cn_already_initialized; - #endif /* __KERNEL__ */ #endif /* __CONNECTOR_H */ -- cgit v1.2.3-70-g09d2 From d9595a7b9c777d45a74774f1428c263a0a47f4c0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 26 Feb 2008 22:20:44 -0800 Subject: [AF_KEY]: Fix oops by converting to proc_net_*(). To make sure the procfs visibility occurs after the ->proc_fs ops are setup, use proc_net_fops_create() and proc_net_remove(). This also fixes an OOPS after module unload in that the name string for remove was wrong, so it wouldn't actually be removed. That bug was introduced by commit 61145aa1a12401ac71bcc450a58c773dd6e2bfb9 ("[KEY]: Clean up proc files creation a bit.") Signed-off-by: David S. Miller --- net/key/af_key.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/key/af_key.c b/net/key/af_key.c index 1c853927810..8b5f486ac80 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -3807,17 +3807,16 @@ static int pfkey_init_proc(void) { struct proc_dir_entry *e; - e = create_proc_entry("pfkey", 0, init_net.proc_net); + e = proc_net_fops_create(&init_net, "pfkey", 0, &pfkey_proc_ops); if (e == NULL) return -ENOMEM; - e->proc_fops = &pfkey_proc_ops; return 0; } static void pfkey_exit_proc(void) { - remove_proc_entry("net/pfkey", NULL); + proc_net_remove(&init_net, "pfkey"); } #else static inline int pfkey_init_proc(void) -- cgit v1.2.3-70-g09d2 From d58831375d68a3bd39d5ebab9eca711fbb4ee108 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Tue, 26 Feb 2008 13:31:42 +1100 Subject: [POWERPC] spufs: fix context destruction during psmap fault We have a small window where a spu context may be destroyed while we're servicing a page fault (from another thread) to the context's problem state mapping. After we up_read() the mmap_sem, it's possible that the context is destroyed by its owning thread, and so the later references to ctx are invalid. This can maifest as a deadlock on the (now free()-ed) context state mutex. This change adds a reference to the context before we release the mmap_sem, so that the context cannot be destroyed. Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/file.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index c66c3756970..f7a7e8635fb 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -366,6 +366,13 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, if (offset >= ps_size) return NOPFN_SIGBUS; + /* + * Because we release the mmap_sem, the context may be destroyed while + * we're in spu_wait. Grab an extra reference so it isn't destroyed + * in the meantime. + */ + get_spu_context(ctx); + /* * We have to wait for context to be loaded before we have * pages to hand out to the user, but we don't want to wait @@ -375,7 +382,7 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, * hanged. */ if (spu_acquire(ctx)) - return NOPFN_REFAULT; + goto refault; if (ctx->state == SPU_STATE_SAVED) { up_read(¤t->mm->mmap_sem); @@ -391,6 +398,9 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, if (!ret) spu_release(ctx); + +refault: + put_spu_context(ctx); return NOPFN_REFAULT; } -- cgit v1.2.3-70-g09d2 From b37d428b24ad38034f56b614de05686ba151b614 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Tue, 26 Feb 2008 23:51:04 -0800 Subject: [INET]: Don't create tunnels with '%' in name. Four tunnel drivers (ip_gre, ipip, ip6_tunnel and sit) can receive a pre-defined name for a device from the userspace. Since these drivers call the register_netdevice() (rtnl_lock, is held), which does _not_ generate the device's name, this name may contain a '%' character. Not sure how bad is this to have a device with a '%' in its name, but all the other places either use the register_netdev(), which call the dev_alloc_name(), or explicitly call the dev_alloc_name() before registering, i.e. do not allow for such names. This had to be prior to the commit 34cc7b, but I forgot to number the patches and this one got lost, sorry. Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller --- net/ipv4/ip_gre.c | 14 +++++++++----- net/ipv4/ipip.c | 14 +++++++++----- net/ipv6/ip6_tunnel.c | 15 +++++++++++---- net/ipv6/sit.c | 13 +++++++++---- 4 files changed, 38 insertions(+), 18 deletions(-) diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 906cb1ada4c..e7821ba7a9a 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -266,20 +266,24 @@ static struct ip_tunnel * ipgre_tunnel_locate(struct ip_tunnel_parm *parms, int if (!dev) return NULL; + if (strchr(name, '%')) { + if (dev_alloc_name(dev, name) < 0) + goto failed_free; + } + dev->init = ipgre_tunnel_init; nt = netdev_priv(dev); nt->parms = *parms; - if (register_netdevice(dev) < 0) { - free_netdev(dev); - goto failed; - } + if (register_netdevice(dev) < 0) + goto failed_free; dev_hold(dev); ipgre_tunnel_link(nt); return nt; -failed: +failed_free: + free_netdev(dev); return NULL; } diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c index e77e3b85583..dbaed69de06 100644 --- a/net/ipv4/ipip.c +++ b/net/ipv4/ipip.c @@ -228,20 +228,24 @@ static struct ip_tunnel * ipip_tunnel_locate(struct ip_tunnel_parm *parms, int c if (dev == NULL) return NULL; + if (strchr(name, '%')) { + if (dev_alloc_name(dev, name) < 0) + goto failed_free; + } + nt = netdev_priv(dev); dev->init = ipip_tunnel_init; nt->parms = *parms; - if (register_netdevice(dev) < 0) { - free_netdev(dev); - goto failed; - } + if (register_netdevice(dev) < 0) + goto failed_free; dev_hold(dev); ipip_tunnel_link(nt); return nt; -failed: +failed_free: + free_netdev(dev); return NULL; } diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 2a124e9a1b2..78f43888092 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -238,17 +238,24 @@ static struct ip6_tnl *ip6_tnl_create(struct ip6_tnl_parm *p) if (dev == NULL) goto failed; + if (strchr(name, '%')) { + if (dev_alloc_name(dev, name) < 0) + goto failed_free; + } + t = netdev_priv(dev); dev->init = ip6_tnl_dev_init; t->parms = *p; - if ((err = register_netdevice(dev)) < 0) { - free_netdev(dev); - goto failed; - } + if ((err = register_netdevice(dev)) < 0) + goto failed_free; + dev_hold(dev); ip6_tnl_link(t); return t; + +failed_free: + free_netdev(dev); failed: return NULL; } diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index dde7801abef..1656c003b98 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -171,6 +171,11 @@ static struct ip_tunnel * ipip6_tunnel_locate(struct ip_tunnel_parm *parms, int if (dev == NULL) return NULL; + if (strchr(name, '%')) { + if (dev_alloc_name(dev, name) < 0) + goto failed_free; + } + nt = netdev_priv(dev); dev->init = ipip6_tunnel_init; nt->parms = *parms; @@ -178,16 +183,16 @@ static struct ip_tunnel * ipip6_tunnel_locate(struct ip_tunnel_parm *parms, int if (parms->i_flags & SIT_ISATAP) dev->priv_flags |= IFF_ISATAP; - if (register_netdevice(dev) < 0) { - free_netdev(dev); - goto failed; - } + if (register_netdevice(dev) < 0) + goto failed_free; dev_hold(dev); ipip6_tunnel_link(nt); return nt; +failed_free: + free_netdev(dev); failed: return NULL; } -- cgit v1.2.3-70-g09d2 From 325d6f5593b40b5a48cf4ade74c01681f2ff6044 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 27 Feb 2008 14:04:29 +0100 Subject: avr32: Fix OCD refcounting bug Iff the parent has TIF_DEBUG set, _and_ clone_flags includes CLONE_PTRACE we should set the TIF_DEBUG flag for the child and increment the ocd refcount. Otherwise, the TIF_DEBUG flag must be unset. Currently, the child inherits TIF_DEBUG from the parent before copy_thread is called, so TIF_DEBUG may be already be set before we determine whether the child is supposed to inherit debugging capabilities from the parent or not. This means that ocd_enable() won't increment the refcount, because TIF_DEBUG is already set, and that TIF_DEBUG will be set for processes that aren't being debugged. This leads to a refcounting asymmetry, which may show up as ------------[ cut here ]------------ Badness at arch/avr32/kernel/ocd.c:73 PC is at ocd_disable+0x34/0x60 LR is at put_lock_stats+0xa/0x20 as reported by David Brownell. Happens when strace'ing a process that forks a new child process, e.g. "strace mount -tjffs2 mtd1 /mnt", and subsequently killing the child process (e.g. "umount /mnt".) Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/process.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c index faf8d0e7680..7f4af0b1e11 100644 --- a/arch/avr32/kernel/process.c +++ b/arch/avr32/kernel/process.c @@ -348,6 +348,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, p->thread.cpu_context.ksp = (unsigned long)childregs; p->thread.cpu_context.pc = (unsigned long)ret_from_fork; + clear_tsk_thread_flag(p, TIF_DEBUG); if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG)) ocd_enable(p); -- cgit v1.2.3-70-g09d2 From e33eb074cb95783b4497327098e4128e9f8c15b9 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 20 Feb 2008 21:45:58 +1100 Subject: [POWERPC] 4xx: Fix Haleakala PCIe compatibility problem in dts Since the 4xx PCIe driver checks for 405ex compatibility, the PCIe interface was not detected as it is currently defined as "405exr" compatible. This patch changes it to "405ex". The 405EX and 405EXr are identical exept that the 2nd PCIe and the 2nd EMAC interfaces are missing. Signed-off-by: Stefan Roese Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/haleakala.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts index 5dd3d15f0fe..ae68fefc01b 100644 --- a/arch/powerpc/boot/dts/haleakala.dts +++ b/arch/powerpc/boot/dts/haleakala.dts @@ -235,7 +235,7 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - compatible = "ibm,plb-pciex-405exr", "ibm,plb-pciex"; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; primary; port = <0>; /* port number */ reg = Date: Fri, 22 Feb 2008 02:21:37 +1100 Subject: [POWERPC] 4xx: Fix L1 cache size in katmai DTS This patch changes the katmai (440SPe) L1 cache size to 32k. Some whitespace issues are cleaned up too. Signed-off-by: Stefan Roese Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/katmai.dts | 58 ++++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index bc32ac7250e..fc86e5a3afc 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -38,8 +38,8 @@ timebase-frequency = <0>; /* Filled in by zImage */ i-cache-line-size = <20>; d-cache-line-size = <20>; - i-cache-size = <20000>; - d-cache-size = <20000>; + i-cache-size = <8000>; + d-cache-size = <8000>; dcr-controller; dcr-access-method = "native"; }; @@ -136,11 +136,11 @@ }; POB0: opb { - compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; + compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 4 e0000000 20000000>; - clock-frequency = <0>; /* Filled in by zImage */ + ranges = <00000000 4 e0000000 20000000>; + clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; @@ -153,38 +153,38 @@ }; UART0: serial@10000200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <10000200 8>; + device_type = "serial"; + compatible = "ns16550"; + reg = <10000200 8>; virtual-reg = ; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; - interrupt-parent = <&UIC0>; - interrupts = <0 4>; - }; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; UART1: serial@10000300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <10000300 8>; + device_type = "serial"; + compatible = "ns16550"; + reg = <10000300 8>; virtual-reg = ; - clock-frequency = <0>; - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <1 4>; - }; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; UART2: serial@10000600 { - device_type = "serial"; - compatible = "ns16550"; - reg = <10000600 8>; + device_type = "serial"; + compatible = "ns16550"; + reg = <10000600 8>; virtual-reg = ; - clock-frequency = <0>; - current-speed = <0>; - interrupt-parent = <&UIC1>; - interrupts = <5 4>; - }; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <5 4>; + }; IIC0: i2c@10000400 { compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; -- cgit v1.2.3-70-g09d2 From c91f91e5fb04fc8fd8fa4b5e9d949031e631c107 Mon Sep 17 00:00:00 2001 From: Valentine Barshak Date: Wed, 27 Feb 2008 01:58:53 +1100 Subject: [POWERPC] 44x: add missing define TARGET_4xx and TARGET_440GX to cuboot-taishan In order to get the proper boad info (bd_info) structure defined in ppcboot.h both TARGET_4xx and TARGET_44x should be defined for all PowerPC 440 boards. The 440GX boards also need TARGET_440GX defined since they have 4 EMACs and there are 4 MAC addesses in bd_info passed by u-boot. Signed-off-by: Valentine Barshak Signed-off-by: Josh Boyer --- arch/powerpc/boot/cuboot-taishan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/boot/cuboot-taishan.c b/arch/powerpc/boot/cuboot-taishan.c index f66455a45ab..b55b80467ee 100644 --- a/arch/powerpc/boot/cuboot-taishan.c +++ b/arch/powerpc/boot/cuboot-taishan.c @@ -21,7 +21,9 @@ #include "dcr.h" #include "4xx.h" +#define TARGET_4xx #define TARGET_44x +#define TARGET_440GX #include "ppcboot.h" static bd_t bd; -- cgit v1.2.3-70-g09d2 From 3bdfe7ec08b4256121a8894cd978e74fcf7031d7 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Wed, 27 Feb 2008 12:06:38 -0800 Subject: [IPV6] SYSCTL: Fix possible memory leakage in error path. In error path, we do need to free memory just allocated. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv6/sysctl_net_ipv6.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c index 408691b777c..d6d3e68086f 100644 --- a/net/ipv6/sysctl_net_ipv6.c +++ b/net/ipv6/sysctl_net_ipv6.c @@ -101,9 +101,6 @@ static int ipv6_sysctl_net_init(struct net *net) net->ipv6.sysctl.table = register_net_sysctl_table(net, net_ipv6_ctl_path, ipv6_table); - if (!net->ipv6.sysctl.table) - return -ENOMEM; - if (!net->ipv6.sysctl.table) goto out_ipv6_icmp_table; -- cgit v1.2.3-70-g09d2 From 4e29e9ec7e0707d3925f5dcc29af0d3f04e49833 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 27 Feb 2008 12:07:47 -0800 Subject: [NETFILTER]: nf_conntrack: fix smp_processor_id() in preemptible code warning Since we're using RCU for the conntrack hash now, we need to avoid getting preempted or interrupted by BHs while changing the stats. Fixes warning reported by Tilman Schmidt when using preemptible RCU: [ 48.180297] BUG: using smp_processor_id() in preemptible [00000000] code: ntpdate/3562 [ 48.180297] caller is __nf_conntrack_find+0x9b/0xeb [nf_conntrack] [ 48.180297] Pid: 3562, comm: ntpdate Not tainted 2.6.25-rc2-mm1-testing #1 [ 48.180297] [] debug_smp_processor_id+0x99/0xb0 [ 48.180297] [] __nf_conntrack_find+0x9b/0xeb [nf_conntrack] Tested-by: Tilman Schmidt Tested-by: Christian Casteyde [Bugzilla #10097] Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_core.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 327e847d270..b77eb56a87e 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -256,13 +256,19 @@ __nf_conntrack_find(const struct nf_conntrack_tuple *tuple) struct hlist_node *n; unsigned int hash = hash_conntrack(tuple); + /* Disable BHs the entire time since we normally need to disable them + * at least once for the stats anyway. + */ + local_bh_disable(); hlist_for_each_entry_rcu(h, n, &nf_conntrack_hash[hash], hnode) { if (nf_ct_tuple_equal(tuple, &h->tuple)) { NF_CT_STAT_INC(found); + local_bh_enable(); return h; } NF_CT_STAT_INC(searched); } + local_bh_enable(); return NULL; } @@ -400,17 +406,20 @@ nf_conntrack_tuple_taken(const struct nf_conntrack_tuple *tuple, struct hlist_node *n; unsigned int hash = hash_conntrack(tuple); - rcu_read_lock(); + /* Disable BHs the entire time since we need to disable them at + * least once for the stats anyway. + */ + rcu_read_lock_bh(); hlist_for_each_entry_rcu(h, n, &nf_conntrack_hash[hash], hnode) { if (nf_ct_tuplehash_to_ctrack(h) != ignored_conntrack && nf_ct_tuple_equal(tuple, &h->tuple)) { NF_CT_STAT_INC(found); - rcu_read_unlock(); + rcu_read_unlock_bh(); return 1; } NF_CT_STAT_INC(searched); } - rcu_read_unlock(); + rcu_read_unlock_bh(); return 0; } -- cgit v1.2.3-70-g09d2 From d61f89e9417e68caf9ca801606694c1c960ad179 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Wed, 27 Feb 2008 12:09:05 -0800 Subject: [NETFILTER]: xt_conntrack: fix missing boolean clamping Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/xt_conntrack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c index 85330856a29..dd192ac74b4 100644 --- a/net/netfilter/xt_conntrack.c +++ b/net/netfilter/xt_conntrack.c @@ -231,7 +231,7 @@ conntrack_mt(const struct sk_buff *skb, const struct net_device *in, if (test_bit(IPS_DST_NAT_BIT, &ct->status)) statebit |= XT_CONNTRACK_STATE_DNAT; } - if ((info->state_mask & statebit) ^ + if (!!(info->state_mask & statebit) ^ !(info->invert_flags & XT_CONNTRACK_STATE)) return false; } -- cgit v1.2.3-70-g09d2 From 6556874dc3770aefae89907b3cf9be8e23d66137 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Wed, 27 Feb 2008 12:20:41 -0800 Subject: [NETFILTER]: xt_conntrack: fix IPv4 address comparison Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/xt_conntrack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c index dd192ac74b4..0c50b289405 100644 --- a/net/netfilter/xt_conntrack.c +++ b/net/netfilter/xt_conntrack.c @@ -122,7 +122,7 @@ conntrack_addrcmp(const union nf_inet_addr *kaddr, const union nf_inet_addr *umask, unsigned int l3proto) { if (l3proto == AF_INET) - return (kaddr->ip & umask->ip) == uaddr->ip; + return ((kaddr->ip ^ uaddr->ip) & umask->ip) == 0; else if (l3proto == AF_INET6) return ipv6_masked_addr_cmp(&kaddr->in6, &umask->in6, &uaddr->in6) == 0; -- cgit v1.2.3-70-g09d2 From fbabbed8284d1526ed01754ecd4fabdb941a1ff2 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 27 Feb 2008 12:21:18 -0800 Subject: [NETFILTER]: Fix NF_QUEUE_NR() parenthesis Properly add parens around the macro argument. This is not needed by the kernel but the macro is exported to userspace, so it shouldn't make any assumptions. Also use NF_VERDICT_BITS instead of NF_VERDICT_QBTIS for the left-shift since thats whats logically correct. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index b74b615492e..f0680c2bee7 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -31,7 +31,7 @@ #define NF_VERDICT_QMASK 0xffff0000 #define NF_VERDICT_QBITS 16 -#define NF_QUEUE_NR(x) (((x << NF_VERDICT_QBITS) & NF_VERDICT_QMASK) | NF_QUEUE) +#define NF_QUEUE_NR(x) ((((x) << NF_VERDICT_BITS) & NF_VERDICT_QMASK) | NF_QUEUE) /* only for userspace compatibility */ #ifndef __KERNEL__ -- cgit v1.2.3-70-g09d2 From b90a137d30a6322d76023d879d40fc31f3edf0a6 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Thu, 14 Feb 2008 10:18:20 -0500 Subject: [SCTP]: Correctly set the length of sctp_assoc_change notification sctp_assoc_change notification may contain the data from a received ABORT chunk. Set the length correctly to account for that. Signed-off-by: Vlad Yasevich --- net/sctp/ulpevent.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c index e27b11f18b7..b43f1f110f8 100644 --- a/net/sctp/ulpevent.c +++ b/net/sctp/ulpevent.c @@ -206,7 +206,7 @@ struct sctp_ulpevent *sctp_ulpevent_make_assoc_change( * This field is the total length of the notification data, including * the notification header. */ - sac->sac_length = sizeof(struct sctp_assoc_change); + sac->sac_length = skb->len; /* Socket Extensions for SCTP * 5.3.1.1 SCTP_ASSOC_CHANGE -- cgit v1.2.3-70-g09d2 From 0111a701867a796a7ca6ecbc385e4befc9f35066 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Wed, 27 Feb 2008 19:08:13 +1100 Subject: [POWERPC] spufs: fix invalid scheduling of forgotten contexts At present, we have a situation where a context with no owner is re-scheduled by spu_forget: Thread 1: reading regs file Thread 2: context owner spu_forget() - ctx->owner = NULL - set SPU_SCHED_WAS_ACTIVE spu_acquire_saved() - context is in saved state spu_release_saved() - SPU_SCHED_WAS_ACTIVE is set, so spu_activate() the context, which now has no owner In spu_forget(), we shouldn't be requesting a re-schedule by setting SPU_SCHED_WAS_ACTIVE. This change removes the set_bit in spu_forget(), so that spu_release_saved() doesn't reinsert this destroyed context on to the run queue. Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/context.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 133995ed5cc..cf6c2c89211 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -109,13 +109,12 @@ void spu_forget(struct spu_context *ctx) /* * This is basically an open-coded spu_acquire_saved, except that - * we don't acquire the state mutex interruptible. + * we don't acquire the state mutex interruptible, and we don't + * want this context to be rescheduled on release. */ mutex_lock(&ctx->state_mutex); - if (ctx->state != SPU_STATE_SAVED) { - set_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags); + if (ctx->state != SPU_STATE_SAVED) spu_deactivate(ctx); - } mm = ctx->owner; ctx->owner = NULL; -- cgit v1.2.3-70-g09d2 From 5b0acc64a3750f8f017b973f1059bb25b791c2a3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 20 Feb 2008 11:47:45 +0100 Subject: rndis_wlan: fix sparse warnings It is obviously wrong to use an enum in a little endian struct, and those other enums should be declared differently. Signed-off-by: Johannes Berg Acked-by: Jussi Kivilinna Signed-off-by: John W. Linville --- drivers/net/wireless/rndis_wlan.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 8ce2ddf8024..d9460aed1f2 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -228,9 +228,9 @@ struct NDIS_WLAN_BSSID_EX { struct NDIS_802_11_SSID Ssid; __le32 Privacy; __le32 Rssi; - enum NDIS_802_11_NETWORK_TYPE NetworkTypeInUse; + __le32 NetworkTypeInUse; struct NDIS_802_11_CONFIGURATION Configuration; - enum NDIS_802_11_NETWORK_INFRASTRUCTURE InfrastructureMode; + __le32 InfrastructureMode; u8 SupportedRates[NDIS_802_11_LENGTH_RATES_EX]; __le32 IELength; u8 IEs[0]; @@ -279,11 +279,11 @@ struct RNDIS_CONFIG_PARAMETER_INFOBUFFER { } __attribute__((packed)); /* these have to match what is in wpa_supplicant */ -enum { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP } wpa_alg; -enum { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP, CIPHER_WEP104 } - wpa_cipher; -enum { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE, KEY_MGMT_802_1X_NO_WPA, - KEY_MGMT_WPA_NONE } wpa_key_mgmt; +enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP }; +enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP, + CIPHER_WEP104 }; +enum wpa_key_mgmt { KEY_MGMT_802_1X, KEY_MGMT_PSK, KEY_MGMT_NONE, + KEY_MGMT_802_1X_NO_WPA, KEY_MGMT_WPA_NONE }; /* * private data -- cgit v1.2.3-70-g09d2 From 4b74850dc3fb8a0941dde0f1bf7686803d1250cd Mon Sep 17 00:00:00 2001 From: Masakazu Mokuno Date: Fri, 22 Feb 2008 16:45:26 +0900 Subject: PS3: gelic: Link the wireless net_device structure to the corresponding device structure Link the net_device structure of the wireless part to the corresponding device structure. Without this, the sysfs node for this net_device would not have 'device' link. Signed-off-by: Masakazu Mokuno Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/ps3_gelic_wireless.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index 750d2a99cb4..daf5abab953 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -2690,6 +2690,7 @@ int gelic_wl_driver_probe(struct gelic_card *card) return -ENOMEM; /* setup net_device structure */ + SET_NETDEV_DEV(netdev, &card->dev->core); gelic_wl_setup_netdev_ops(netdev); /* setup some of net_device and register it */ -- cgit v1.2.3-70-g09d2 From 8bfb04756a698e38825656eab3bc339a321551b3 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Sat, 23 Feb 2008 21:46:31 +0100 Subject: gelic wireless driver needs WIRELESS_EXT support | CC drivers/net/ps3_gelic_wireless.o | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c: In function 'gelic_wl_setup_netdev_ops': | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2660: error: 'struct net_device' has no member named 'wireless_data' | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2661: error: 'struct net_device' has no member named 'wireless_handlers' | make[3]: *** [drivers/net/ps3_gelic_wireless.o] Error 1 | make[2]: *** [drivers/net] Error 2 | make[1]: *** [drivers] Error 2 | make[1]: *** Waiting for unfinished jobs.... | make: *** [sub-make] Error 2 Signed-off-by: Sebastian Siewior Acked-by: Masakazu Mokuno Signed-off-by: John W. Linville --- drivers/net/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index a20e72f5ad2..a0f0e605d63 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2368,6 +2368,7 @@ config GELIC_NET config GELIC_WIRELESS bool "PS3 Wireless support" depends on GELIC_NET + select WIRELESS_EXT help This option adds the support for the wireless feature of PS3. If you have the wireless-less model of PS3 or have no plan to -- cgit v1.2.3-70-g09d2 From b290d433618aa7122f6e6c4a62ddc79412a48d4d Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 25 Feb 2008 23:15:01 +0100 Subject: rt2x00: Fix antenna diversity Fix 2 issues in antenna diversity selection. 1) the following statement will always return true. if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5) It is cleaner to check if the absolute value is smaller then 5. 2) Only enable software diversity when default antenna setup indicates support for it. Don't select it when the hardware does not indicate support for it... Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index c4be2ac4d7a..00f5f0d49e1 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -293,7 +293,7 @@ static void rt2x00lib_evaluate_antenna_eval(struct rt2x00_dev *rt2x00dev) * sample the rssi from the other antenna to make a valid * comparison between the 2 antennas. */ - if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5) + if (abs(rssi_curr - rssi_old) < 5) return; rt2x00dev->link.ant.flags |= ANTENNA_MODE_SAMPLE; @@ -319,10 +319,10 @@ static void rt2x00lib_evaluate_antenna(struct rt2x00_dev *rt2x00dev) rt2x00dev->link.ant.flags &= ~ANTENNA_TX_DIVERSITY; if (rt2x00dev->hw->conf.antenna_sel_rx == 0 && - rt2x00dev->default_ant.rx != ANTENNA_SW_DIVERSITY) + rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY) rt2x00dev->link.ant.flags |= ANTENNA_RX_DIVERSITY; if (rt2x00dev->hw->conf.antenna_sel_tx == 0 && - rt2x00dev->default_ant.tx != ANTENNA_SW_DIVERSITY) + rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY) rt2x00dev->link.ant.flags |= ANTENNA_TX_DIVERSITY; if (!(rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) && -- cgit v1.2.3-70-g09d2 From 61667d8d5bf3c3ee09474069eaf4b93a4755ff8b Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 25 Feb 2008 23:15:05 +0100 Subject: rt2x00: Add link tuner safe RX toggle states This adds 2 new states which both are used to toggle the RX. These new states are required for usage inside the link tuner thread, because the normal RX toggling will stop the link tuner thread. While it is possible that the link tuner thread itself is the caller of the RX toggle (when using software antenna diversity). Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2400pci.c | 6 +++++- drivers/net/wireless/rt2x00/rt2500pci.c | 6 +++++- drivers/net/wireless/rt2x00/rt2500usb.c | 6 +++++- drivers/net/wireless/rt2x00/rt2x00config.c | 4 ++-- drivers/net/wireless/rt2x00/rt2x00reg.h | 2 ++ drivers/net/wireless/rt2x00/rt61pci.c | 6 +++++- drivers/net/wireless/rt2x00/rt73usb.c | 6 +++++- 7 files changed, 29 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index d6cba138c7a..c69f85ed766 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -960,8 +960,12 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev, rt2400pci_disable_radio(rt2x00dev); break; case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + break; case STATE_RADIO_RX_OFF: - rt2400pci_toggle_rx(rt2x00dev, state); + case STATE_RADIO_RX_OFF_LINK: + rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index e874fdcae20..91e87b53374 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1112,8 +1112,12 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev, rt2500pci_disable_radio(rt2x00dev); break; case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + break; case STATE_RADIO_RX_OFF: - rt2500pci_toggle_rx(rt2x00dev, state); + case STATE_RADIO_RX_OFF_LINK: + rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 4ca9730e5e9..638c3d24310 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1001,8 +1001,12 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev, rt2500usb_disable_radio(rt2x00dev); break; case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + break; case STATE_RADIO_RX_OFF: - rt2500usb_toggle_rx(rt2x00dev, state); + case STATE_RADIO_RX_OFF_LINK: + rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 72cfe00c1ed..0d57d7f6783 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -102,7 +102,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, * else the changes will be ignored by the device. */ if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); + rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK); /* * Write new antenna setup to device and reset the link tuner. @@ -116,7 +116,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, rt2x00dev->link.ant.active.tx = libconf.ant.tx; if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK); } void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h index 838421216da..b1915dc7dda 100644 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -85,6 +85,8 @@ enum dev_state { STATE_RADIO_OFF, STATE_RADIO_RX_ON, STATE_RADIO_RX_OFF, + STATE_RADIO_RX_ON_LINK, + STATE_RADIO_RX_OFF_LINK, STATE_RADIO_IRQ_ON, STATE_RADIO_IRQ_OFF, }; diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index b31f0c26c32..e808db98f2f 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1482,8 +1482,12 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, rt61pci_disable_radio(rt2x00dev); break; case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + break; case STATE_RADIO_RX_OFF: - rt61pci_toggle_rx(rt2x00dev, state); + case STATE_RADIO_RX_OFF_LINK: + rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 4d576ab3e7f..4fac2d414d8 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1208,8 +1208,12 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev, rt73usb_disable_radio(rt2x00dev); break; case STATE_RADIO_RX_ON: + case STATE_RADIO_RX_ON_LINK: + rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); + break; case STATE_RADIO_RX_OFF: - rt73usb_toggle_rx(rt2x00dev, state); + case STATE_RADIO_RX_OFF_LINK: + rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: -- cgit v1.2.3-70-g09d2 From 05253c93feb40901d80a0d6f239a0bc78860c679 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 25 Feb 2008 23:15:08 +0100 Subject: rt2x00: Don't switch to antenna with low rssi When rssi_a > rssi_b is true and the current antenna was already antenna A, then rt2x00 incorrectly jumped to antenna B. Also don't configure the antenna when there has been no change in the antenna setup. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00config.c | 4 ++++ drivers/net/wireless/rt2x00/rt2x00dev.c | 18 +++++------------- 2 files changed, 9 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 0d57d7f6783..07adc576db4 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -97,6 +97,10 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, libconf.ant.rx = rx; libconf.ant.tx = tx; + if (rx == rt2x00dev->link.ant.active.rx && + tx == rt2x00dev->link.ant.active.tx) + return; + /* * Antenna setup changes require the RX to be disabled, * else the changes will be ignored by the device. diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 00f5f0d49e1..7294c75272d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -260,19 +260,11 @@ static void rt2x00lib_evaluate_antenna_sample(struct rt2x00_dev *rt2x00dev) if (sample_a == sample_b) return; - if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) { - if (sample_a > sample_b && rx == ANTENNA_B) - rx = ANTENNA_A; - else if (rx == ANTENNA_A) - rx = ANTENNA_B; - } + if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) + rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; - if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) { - if (sample_a > sample_b && tx == ANTENNA_B) - tx = ANTENNA_A; - else if (tx == ANTENNA_A) - tx = ANTENNA_B; - } + if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY) + tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B; rt2x00lib_config_antenna(rt2x00dev, rx, tx); } @@ -327,7 +319,7 @@ static void rt2x00lib_evaluate_antenna(struct rt2x00_dev *rt2x00dev) if (!(rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) && !(rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)) { - rt2x00dev->link.ant.flags &= ~ANTENNA_MODE_SAMPLE; + rt2x00dev->link.ant.flags = 0; return; } -- cgit v1.2.3-70-g09d2 From 53b3f8e47a38f39836da1c9f9d2ea9a9c164c8f4 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 25 Feb 2008 23:15:13 +0100 Subject: rt2x00: Fix rt2x00lib_reset_link_tuner() rt2x00lib_reset_link_tuner() can be called from within the link tuner itself. This means that it should _not_ call rt2x00lib_stop_link_tuner() since that will cause the thread to hang. Reorder the things that should be done during a link tuner reset and during a link tuner start. Also make antenna tuning the last step of the link tuner since it could possibly reset some statistical information which we need for average calculation. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 49 ++++++++++++++++++++------------- 1 file changed, 30 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 7294c75272d..0d51f478bcd 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -61,11 +61,33 @@ EXPORT_SYMBOL_GPL(rt2x00lib_get_ring); /* * Link tuning handlers */ -static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) +void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev) { + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + /* + * Reset link information. + * Both the currently active vgc level as well as + * the link tuner counter should be reset. Resetting + * the counter is important for devices where the + * device should only perform link tuning during the + * first minute after being enabled. + */ rt2x00dev->link.count = 0; rt2x00dev->link.vgc_level = 0; + /* + * Reset the link tuner. + */ + rt2x00dev->ops->lib->reset_tuner(rt2x00dev); +} + +static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) +{ + /* + * Clear all (possibly) pre-existing quality statistics. + */ memset(&rt2x00dev->link.qual, 0, sizeof(rt2x00dev->link.qual)); /* @@ -79,10 +101,7 @@ static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) rt2x00dev->link.qual.rx_percentage = 50; rt2x00dev->link.qual.tx_percentage = 50; - /* - * Reset the link tuner. - */ - rt2x00dev->ops->lib->reset_tuner(rt2x00dev); + rt2x00lib_reset_link_tuner(rt2x00dev); queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work, LINK_TUNE_INTERVAL); @@ -93,15 +112,6 @@ static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev) cancel_delayed_work_sync(&rt2x00dev->link.work); } -void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev) -{ - if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) - return; - - rt2x00lib_stop_link_tuner(rt2x00dev); - rt2x00lib_start_link_tuner(rt2x00dev); -} - /* * Ring initialization */ @@ -432,17 +442,18 @@ static void rt2x00lib_link_tuner(struct work_struct *work) if (!test_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags)) rt2x00dev->ops->lib->link_tuner(rt2x00dev); - /* - * Evaluate antenna setup. - */ - rt2x00lib_evaluate_antenna(rt2x00dev); - /* * Precalculate a portion of the link signal which is * in based on the tx/rx success/failure counters. */ rt2x00lib_precalculate_link_signal(&rt2x00dev->link.qual); + /* + * Evaluate antenna setup, make this the last step since this could + * possibly reset some statistics. + */ + rt2x00lib_evaluate_antenna(rt2x00dev); + /* * Increase tuner counter, and reschedule the next link tuner run. */ -- cgit v1.2.3-70-g09d2 From 03147dfc8a3756439f0cc54aa181f30067f1b21b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Feb 2008 00:39:28 +0100 Subject: mac80211: fix kmalloc vs. net_ratelimit The "goto end;" part definitely must not be rate limited. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ieee80211_sta.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c index 2019b4f0528..9aeed532022 100644 --- a/net/mac80211/ieee80211_sta.c +++ b/net/mac80211/ieee80211_sta.c @@ -1116,9 +1116,10 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev, /* prepare reordering buffer */ tid_agg_rx->reorder_buf = kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC); - if ((!tid_agg_rx->reorder_buf) && net_ratelimit()) { - printk(KERN_ERR "can not allocate reordering buffer " - "to tid %d\n", tid); + if (!tid_agg_rx->reorder_buf) { + if (net_ratelimit()) + printk(KERN_ERR "can not allocate reordering buffer " + "to tid %d\n", tid); goto end; } memset(tid_agg_rx->reorder_buf, 0, -- cgit v1.2.3-70-g09d2 From 4b7524a42e14a7f86fa12611f3419650e99e2526 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 26 Feb 2008 15:26:56 +0100 Subject: libertas: Remove unused exports The libertas driver exports a number of symbols with no in-tree users; remove these unused exports. lbs_reset_device() is completely unused, with no callers at all, so remove the function completely. A couple of these unused exported symbols are static, which causes the following build error on ia64 with gcc 4.2.3: drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict Signed-off-by: Roland Dreier Acked-by: Holger Schurig Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cmd.c | 2 -- drivers/net/wireless/libertas/decl.h | 1 - drivers/net/wireless/libertas/main.c | 17 ----------------- 3 files changed, 20 deletions(-) diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index eab020338fd..b3c1acbcc65 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -1040,7 +1040,6 @@ int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action, lbs_deb_leave(LBS_DEB_CMD); return ret; } -EXPORT_SYMBOL_GPL(lbs_mesh_access); int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan) { @@ -1576,7 +1575,6 @@ done: lbs_deb_leave_args(LBS_DEB_HOST, "ret %d", ret); return ret; } -EXPORT_SYMBOL_GPL(lbs_prepare_and_send_command); /** * @brief This function allocates the command buffer and link diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h index aaacd9bd6bd..4e22341b4f3 100644 --- a/drivers/net/wireless/libertas/decl.h +++ b/drivers/net/wireless/libertas/decl.h @@ -69,7 +69,6 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev); int lbs_remove_card(struct lbs_private *priv); int lbs_start_card(struct lbs_private *priv); int lbs_stop_card(struct lbs_private *priv); -int lbs_reset_device(struct lbs_private *priv); void lbs_host_to_card_done(struct lbs_private *priv); int lbs_update_channel(struct lbs_private *priv); diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 84fb49ca0fa..4d4e2f3b66a 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -1351,8 +1351,6 @@ done: lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret); return ret; } -EXPORT_SYMBOL_GPL(lbs_add_mesh); - static void lbs_remove_mesh(struct lbs_private *priv) { @@ -1372,7 +1370,6 @@ static void lbs_remove_mesh(struct lbs_private *priv) free_netdev(mesh_dev); lbs_deb_leave(LBS_DEB_MESH); } -EXPORT_SYMBOL_GPL(lbs_remove_mesh); /** * @brief This function finds the CFP in @@ -1458,20 +1455,6 @@ void lbs_interrupt(struct lbs_private *priv) } EXPORT_SYMBOL_GPL(lbs_interrupt); -int lbs_reset_device(struct lbs_private *priv) -{ - int ret; - - lbs_deb_enter(LBS_DEB_MAIN); - ret = lbs_prepare_and_send_command(priv, CMD_802_11_RESET, - CMD_ACT_HALT, 0, 0, NULL); - msleep_interruptible(10); - - lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret); - return ret; -} -EXPORT_SYMBOL_GPL(lbs_reset_device); - static int __init lbs_init_module(void) { lbs_deb_enter(LBS_DEB_MAIN); -- cgit v1.2.3-70-g09d2 From c7084535c9d2b8bcfc19f1ad9452eabde742ae22 Mon Sep 17 00:00:00 2001 From: Alexey Zaytsev Date: Sat, 23 Feb 2008 12:59:26 +0300 Subject: Use a separate config option for the b43 pci to ssb bridge. The bridge code was unnecessary enabled by the b44 driver, but it prevents the bcm43xx driver from being loaded, as the bridge claims the same pci ids. Now we enable the birdge only if the b43{legacy} drivers are selected. Signed-off-by: Alexey Zaytsev Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/b43/Kconfig | 1 + drivers/net/wireless/b43legacy/Kconfig | 1 + drivers/ssb/Kconfig | 5 +++++ drivers/ssb/Makefile | 2 +- drivers/ssb/ssb_private.h | 4 ++-- 5 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig index 1a2141dabdc..8bc4bc4c330 100644 --- a/drivers/net/wireless/b43/Kconfig +++ b/drivers/net/wireless/b43/Kconfig @@ -32,6 +32,7 @@ config B43_PCI_AUTOSELECT bool depends on B43 && SSB_PCIHOST_POSSIBLE select SSB_PCIHOST + select SSB_B43_PCI_BRIDGE default y # Auto-select SSB PCICORE driver, if possible diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig index 6745579ba96..13c65faf024 100644 --- a/drivers/net/wireless/b43legacy/Kconfig +++ b/drivers/net/wireless/b43legacy/Kconfig @@ -25,6 +25,7 @@ config B43LEGACY_PCI_AUTOSELECT bool depends on B43LEGACY && SSB_PCIHOST_POSSIBLE select SSB_PCIHOST + select SSB_B43_PCI_BRIDGE default y # Auto-select SSB PCICORE driver, if possible diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig index 78fd33125e0..adea792fb67 100644 --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -35,6 +35,11 @@ config SSB_PCIHOST If unsure, say Y +config SSB_B43_PCI_BRIDGE + bool + depends on SSB_PCIHOST + default n + config SSB_PCMCIAHOST_POSSIBLE bool depends on SSB && (PCMCIA = y || PCMCIA = SSB) && EXPERIMENTAL diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile index e235144add7..de94c2eb7a3 100644 --- a/drivers/ssb/Makefile +++ b/drivers/ssb/Makefile @@ -14,6 +14,6 @@ ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o # b43 pci-ssb-bridge driver # Not strictly a part of SSB, but kept here for convenience -ssb-$(CONFIG_SSB_PCIHOST) += b43_pci_bridge.o +ssb-$(CONFIG_SSB_B43_PCI_BRIDGE) += b43_pci_bridge.o obj-$(CONFIG_SSB) += ssb.o diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h index a789364264a..21eca2b5118 100644 --- a/drivers/ssb/ssb_private.h +++ b/drivers/ssb/ssb_private.h @@ -120,10 +120,10 @@ extern int ssb_devices_thaw(struct ssb_bus *bus); extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev); /* b43_pci_bridge.c */ -#ifdef CONFIG_SSB_PCIHOST +#ifdef CONFIG_SSB_B43_PCI_BRIDGE extern int __init b43_pci_ssb_bridge_init(void); extern void __exit b43_pci_ssb_bridge_exit(void); -#else /* CONFIG_SSB_PCIHOST */ +#else /* CONFIG_SSB_B43_PCI_BRIDGR */ static inline int b43_pci_ssb_bridge_init(void) { return 0; -- cgit v1.2.3-70-g09d2 From f9d8f88952c263a4eeaaa0fc6ff726d2315b6a57 Mon Sep 17 00:00:00 2001 From: Alexey Zaytsev Date: Sat, 23 Feb 2008 13:33:07 +0300 Subject: Don't build bcm43xx if SSB is static and b43 PCI-SSB bridge is enabled. This may happen e.g. when the ssb is statically enables by the b44 driver, and the b43 pci-ssb bridge is enbled by the b43/b43legacy drivers, or the b43/b43legacy drivers are built statically. Signed-off-by: Alexey Zaytsev Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/bcm43xx/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/bcm43xx/Kconfig b/drivers/net/wireless/bcm43xx/Kconfig index 0159701e845..afb8f4305c2 100644 --- a/drivers/net/wireless/bcm43xx/Kconfig +++ b/drivers/net/wireless/bcm43xx/Kconfig @@ -1,6 +1,6 @@ config BCM43XX tristate "Broadcom BCM43xx wireless support (DEPRECATED)" - depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && WLAN_80211 && EXPERIMENTAL + depends on PCI && IEEE80211 && IEEE80211_SOFTMAC && WLAN_80211 && (!SSB_B43_PCI_BRIDGE || SSB != y) && EXPERIMENTAL select WIRELESS_EXT select FW_LOADER select HW_RANDOM -- cgit v1.2.3-70-g09d2 From fe57e8be9e858b6d7af4e088cbbe718f51241eee Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Thu, 28 Feb 2008 08:16:27 -0600 Subject: [POWERPC] 4xx: Use correct board info structure in cuboot wrappers Correct the remaining 44x cuboot wrappers to define TARGET_4xx as well. This creates the correct structure to use, including things like the second MAC address. Signed-off-by: Josh Boyer --- arch/powerpc/boot/cuboot-bamboo.c | 1 + arch/powerpc/boot/cuboot-ebony.c | 1 + arch/powerpc/boot/cuboot-katmai.c | 1 + arch/powerpc/boot/cuboot-warp.c | 1 + 4 files changed, 4 insertions(+) diff --git a/arch/powerpc/boot/cuboot-bamboo.c b/arch/powerpc/boot/cuboot-bamboo.c index 900c7ff2b7e..b5c30f766c4 100644 --- a/arch/powerpc/boot/cuboot-bamboo.c +++ b/arch/powerpc/boot/cuboot-bamboo.c @@ -17,6 +17,7 @@ #include "44x.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/cuboot-ebony.c b/arch/powerpc/boot/cuboot-ebony.c index c5f37ce172e..56564ba37f6 100644 --- a/arch/powerpc/boot/cuboot-ebony.c +++ b/arch/powerpc/boot/cuboot-ebony.c @@ -17,6 +17,7 @@ #include "44x.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/cuboot-katmai.c b/arch/powerpc/boot/cuboot-katmai.c index c021167f938..5434d70b566 100644 --- a/arch/powerpc/boot/cuboot-katmai.c +++ b/arch/powerpc/boot/cuboot-katmai.c @@ -22,6 +22,7 @@ #include "44x.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c index bdedebe1bc1..3db93e85e9e 100644 --- a/arch/powerpc/boot/cuboot-warp.c +++ b/arch/powerpc/boot/cuboot-warp.c @@ -11,6 +11,7 @@ #include "4xx.h" #include "cuboot.h" +#define TARGET_4xx #define TARGET_44x #include "ppcboot.h" -- cgit v1.2.3-70-g09d2 From 2d8d4fdf78488f3362dccfd2a6bfdb4bc65c0858 Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Thu, 28 Feb 2008 15:11:26 +0100 Subject: SSB PCI core driver: use new SPROM data structure Switch the SSB PCI core driver to the new SPROM data structure now that the old one has been removed. Signed-off-by: Aurelien Jarno Acked-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/ssb/driver_pcicore.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 6d99a988005..07ab48d9cea 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -393,7 +393,7 @@ static int pcicore_is_in_hostmode(struct ssb_pcicore *pc) chipid_top != 0x5300) return 0; - if (bus->sprom.r1.boardflags_lo & SSB_PCICORE_BFL_NOPCI) + if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) return 0; /* The 200-pin BCM4712 package does not bond out PCI. Even when -- cgit v1.2.3-70-g09d2 From f62f2fdd9c33160584b800da8c4a25ff1679225a Mon Sep 17 00:00:00 2001 From: Stephen Neuendorffer Date: Mon, 25 Feb 2008 10:34:47 +1100 Subject: [POWERPC] Xilinx: hwicap cleanup This fixes various items pointed out during a review of the hwicap driver. Primarily, reversed memcpy calls, re-entrancy issues, and mutex conversion have been addressed. There are also fixes to comments to use the kerneldoc format, as well as some sparse annotations. Signed-off-by: Stephen Neuendorffer Acked-by: Grant Likely Signed-off-by: Josh Boyer --- drivers/char/xilinx_hwicap/buffer_icap.c | 80 ++++++++--------- drivers/char/xilinx_hwicap/fifo_icap.c | 60 ++++++------- drivers/char/xilinx_hwicap/xilinx_hwicap.c | 138 +++++++++++++---------------- drivers/char/xilinx_hwicap/xilinx_hwicap.h | 24 ++--- 4 files changed, 144 insertions(+), 158 deletions(-) diff --git a/drivers/char/xilinx_hwicap/buffer_icap.c b/drivers/char/xilinx_hwicap/buffer_icap.c index dfea2bde162..f577daedb63 100644 --- a/drivers/char/xilinx_hwicap/buffer_icap.c +++ b/drivers/char/xilinx_hwicap/buffer_icap.c @@ -73,8 +73,8 @@ #define XHI_BUFFER_START 0 /** - * buffer_icap_get_status: Get the contents of the status register. - * @parameter base_address: is the base address of the device + * buffer_icap_get_status - Get the contents of the status register. + * @base_address: is the base address of the device * * The status register contains the ICAP status and the done bit. * @@ -94,9 +94,9 @@ static inline u32 buffer_icap_get_status(void __iomem *base_address) } /** - * buffer_icap_get_bram: Reads data from the storage buffer bram. - * @parameter base_address: contains the base address of the component. - * @parameter offset: The word offset from which the data should be read. + * buffer_icap_get_bram - Reads data from the storage buffer bram. + * @base_address: contains the base address of the component. + * @offset: The word offset from which the data should be read. * * A bram is used as a configuration memory cache. One frame of data can * be stored in this "storage buffer". @@ -108,8 +108,8 @@ static inline u32 buffer_icap_get_bram(void __iomem *base_address, } /** - * buffer_icap_busy: Return true if the icap device is busy - * @parameter base_address: is the base address of the device + * buffer_icap_busy - Return true if the icap device is busy + * @base_address: is the base address of the device * * The queries the low order bit of the status register, which * indicates whether the current configuration or readback operation @@ -121,8 +121,8 @@ static inline bool buffer_icap_busy(void __iomem *base_address) } /** - * buffer_icap_busy: Return true if the icap device is not busy - * @parameter base_address: is the base address of the device + * buffer_icap_busy - Return true if the icap device is not busy + * @base_address: is the base address of the device * * The queries the low order bit of the status register, which * indicates whether the current configuration or readback operation @@ -134,9 +134,9 @@ static inline bool buffer_icap_done(void __iomem *base_address) } /** - * buffer_icap_set_size: Set the size register. - * @parameter base_address: is the base address of the device - * @parameter data: The size in bytes. + * buffer_icap_set_size - Set the size register. + * @base_address: is the base address of the device + * @data: The size in bytes. * * The size register holds the number of 8 bit bytes to transfer between * bram and the icap (or icap to bram). @@ -148,9 +148,9 @@ static inline void buffer_icap_set_size(void __iomem *base_address, } /** - * buffer_icap_mSetoffsetReg: Set the bram offset register. - * @parameter base_address: contains the base address of the device. - * @parameter data: is the value to be written to the data register. + * buffer_icap_set_offset - Set the bram offset register. + * @base_address: contains the base address of the device. + * @data: is the value to be written to the data register. * * The bram offset register holds the starting bram address to transfer * data from during configuration or write data to during readback. @@ -162,9 +162,9 @@ static inline void buffer_icap_set_offset(void __iomem *base_address, } /** - * buffer_icap_set_rnc: Set the RNC (Readback not Configure) register. - * @parameter base_address: contains the base address of the device. - * @parameter data: is the value to be written to the data register. + * buffer_icap_set_rnc - Set the RNC (Readback not Configure) register. + * @base_address: contains the base address of the device. + * @data: is the value to be written to the data register. * * The RNC register determines the direction of the data transfer. It * controls whether a configuration or readback take place. Writing to @@ -178,10 +178,10 @@ static inline void buffer_icap_set_rnc(void __iomem *base_address, } /** - * buffer_icap_set_bram: Write data to the storage buffer bram. - * @parameter base_address: contains the base address of the component. - * @parameter offset: The word offset at which the data should be written. - * @parameter data: The value to be written to the bram offset. + * buffer_icap_set_bram - Write data to the storage buffer bram. + * @base_address: contains the base address of the component. + * @offset: The word offset at which the data should be written. + * @data: The value to be written to the bram offset. * * A bram is used as a configuration memory cache. One frame of data can * be stored in this "storage buffer". @@ -193,10 +193,10 @@ static inline void buffer_icap_set_bram(void __iomem *base_address, } /** - * buffer_icap_device_read: Transfer bytes from ICAP to the storage buffer. - * @parameter drvdata: a pointer to the drvdata. - * @parameter offset: The storage buffer start address. - * @parameter count: The number of words (32 bit) to read from the + * buffer_icap_device_read - Transfer bytes from ICAP to the storage buffer. + * @drvdata: a pointer to the drvdata. + * @offset: The storage buffer start address. + * @count: The number of words (32 bit) to read from the * device (ICAP). **/ static int buffer_icap_device_read(struct hwicap_drvdata *drvdata, @@ -227,10 +227,10 @@ static int buffer_icap_device_read(struct hwicap_drvdata *drvdata, }; /** - * buffer_icap_device_write: Transfer bytes from ICAP to the storage buffer. - * @parameter drvdata: a pointer to the drvdata. - * @parameter offset: The storage buffer start address. - * @parameter count: The number of words (32 bit) to read from the + * buffer_icap_device_write - Transfer bytes from ICAP to the storage buffer. + * @drvdata: a pointer to the drvdata. + * @offset: The storage buffer start address. + * @count: The number of words (32 bit) to read from the * device (ICAP). **/ static int buffer_icap_device_write(struct hwicap_drvdata *drvdata, @@ -261,8 +261,8 @@ static int buffer_icap_device_write(struct hwicap_drvdata *drvdata, }; /** - * buffer_icap_reset: Reset the logic of the icap device. - * @parameter drvdata: a pointer to the drvdata. + * buffer_icap_reset - Reset the logic of the icap device. + * @drvdata: a pointer to the drvdata. * * Writing to the status register resets the ICAP logic in an internal * version of the core. For the version of the core published in EDK, @@ -274,10 +274,10 @@ void buffer_icap_reset(struct hwicap_drvdata *drvdata) } /** - * buffer_icap_set_configuration: Load a partial bitstream from system memory. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: Kernel address of the partial bitstream. - * @parameter size: the size of the partial bitstream in 32 bit words. + * buffer_icap_set_configuration - Load a partial bitstream from system memory. + * @drvdata: a pointer to the drvdata. + * @data: Kernel address of the partial bitstream. + * @size: the size of the partial bitstream in 32 bit words. **/ int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data, u32 size) @@ -333,10 +333,10 @@ int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data, }; /** - * buffer_icap_get_configuration: Read configuration data from the device. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: Address of the data representing the partial bitstream - * @parameter size: the size of the partial bitstream in 32 bit words. + * buffer_icap_get_configuration - Read configuration data from the device. + * @drvdata: a pointer to the drvdata. + * @data: Address of the data representing the partial bitstream + * @size: the size of the partial bitstream in 32 bit words. **/ int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data, u32 size) diff --git a/drivers/char/xilinx_hwicap/fifo_icap.c b/drivers/char/xilinx_hwicap/fifo_icap.c index 0988314694a..6f45dbd4712 100644 --- a/drivers/char/xilinx_hwicap/fifo_icap.c +++ b/drivers/char/xilinx_hwicap/fifo_icap.c @@ -94,9 +94,9 @@ /** - * fifo_icap_fifo_write: Write data to the write FIFO. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: the 32-bit value to be written to the FIFO. + * fifo_icap_fifo_write - Write data to the write FIFO. + * @drvdata: a pointer to the drvdata. + * @data: the 32-bit value to be written to the FIFO. * * This function will silently fail if the fifo is full. **/ @@ -108,8 +108,8 @@ static inline void fifo_icap_fifo_write(struct hwicap_drvdata *drvdata, } /** - * fifo_icap_fifo_read: Read data from the Read FIFO. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_fifo_read - Read data from the Read FIFO. + * @drvdata: a pointer to the drvdata. * * This function will silently fail if the fifo is empty. **/ @@ -121,9 +121,9 @@ static inline u32 fifo_icap_fifo_read(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_set_read_size: Set the the size register. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: the size of the following read transaction, in words. + * fifo_icap_set_read_size - Set the the size register. + * @drvdata: a pointer to the drvdata. + * @data: the size of the following read transaction, in words. **/ static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata, u32 data) @@ -132,8 +132,8 @@ static inline void fifo_icap_set_read_size(struct hwicap_drvdata *drvdata, } /** - * fifo_icap_start_config: Initiate a configuration (write) to the device. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_start_config - Initiate a configuration (write) to the device. + * @drvdata: a pointer to the drvdata. **/ static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata) { @@ -142,8 +142,8 @@ static inline void fifo_icap_start_config(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_start_readback: Initiate a readback from the device. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_start_readback - Initiate a readback from the device. + * @drvdata: a pointer to the drvdata. **/ static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata) { @@ -152,8 +152,8 @@ static inline void fifo_icap_start_readback(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_busy: Return true if the ICAP is still processing a transaction. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_busy - Return true if the ICAP is still processing a transaction. + * @drvdata: a pointer to the drvdata. **/ static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata) { @@ -163,8 +163,8 @@ static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_write_fifo_vacancy: Query the write fifo available space. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_write_fifo_vacancy - Query the write fifo available space. + * @drvdata: a pointer to the drvdata. * * Return the number of words that can be safely pushed into the write fifo. **/ @@ -175,8 +175,8 @@ static inline u32 fifo_icap_write_fifo_vacancy( } /** - * fifo_icap_read_fifo_occupancy: Query the read fifo available data. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_read_fifo_occupancy - Query the read fifo available data. + * @drvdata: a pointer to the drvdata. * * Return the number of words that can be safely read from the read fifo. **/ @@ -187,11 +187,11 @@ static inline u32 fifo_icap_read_fifo_occupancy( } /** - * fifo_icap_set_configuration: Send configuration data to the ICAP. - * @parameter drvdata: a pointer to the drvdata. - * @parameter frame_buffer: a pointer to the data to be written to the + * fifo_icap_set_configuration - Send configuration data to the ICAP. + * @drvdata: a pointer to the drvdata. + * @frame_buffer: a pointer to the data to be written to the * ICAP device. - * @parameter num_words: the number of words (32 bit) to write to the ICAP + * @num_words: the number of words (32 bit) to write to the ICAP * device. * This function writes the given user data to the Write FIFO in @@ -266,10 +266,10 @@ int fifo_icap_set_configuration(struct hwicap_drvdata *drvdata, } /** - * fifo_icap_get_configuration: Read configuration data from the device. - * @parameter drvdata: a pointer to the drvdata. - * @parameter data: Address of the data representing the partial bitstream - * @parameter size: the size of the partial bitstream in 32 bit words. + * fifo_icap_get_configuration - Read configuration data from the device. + * @drvdata: a pointer to the drvdata. + * @data: Address of the data representing the partial bitstream + * @size: the size of the partial bitstream in 32 bit words. * * This function reads the specified number of words from the ICAP device in * the polled mode. @@ -335,8 +335,8 @@ int fifo_icap_get_configuration(struct hwicap_drvdata *drvdata, } /** - * buffer_icap_reset: Reset the logic of the icap device. - * @parameter drvdata: a pointer to the drvdata. + * buffer_icap_reset - Reset the logic of the icap device. + * @drvdata: a pointer to the drvdata. * * This function forces the software reset of the complete HWICAP device. * All the registers will return to the default value and the FIFO is also @@ -360,8 +360,8 @@ void fifo_icap_reset(struct hwicap_drvdata *drvdata) } /** - * fifo_icap_flush_fifo: This function flushes the FIFOs in the device. - * @parameter drvdata: a pointer to the drvdata. + * fifo_icap_flush_fifo - This function flushes the FIFOs in the device. + * @drvdata: a pointer to the drvdata. */ void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata) { diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index 24f6aef0fd3..2284fa2a5a5 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -84,7 +84,7 @@ #include #include #include -#include +#include #include #include #include @@ -119,6 +119,7 @@ module_param(xhwicap_minor, int, S_IRUGO); /* An array, which is set to true when the device is registered. */ static bool probed_devices[HWICAP_DEVICES]; +static struct mutex icap_sem; static struct class *icap_class; @@ -199,14 +200,14 @@ static const struct config_registers v5_config_registers = { }; /** - * hwicap_command_desync: Send a DESYNC command to the ICAP port. - * @parameter drvdata: a pointer to the drvdata. + * hwicap_command_desync - Send a DESYNC command to the ICAP port. + * @drvdata: a pointer to the drvdata. * * This command desynchronizes the ICAP After this command, a * bitstream containing a NULL packet, followed by a SYNCH packet is * required before the ICAP will recognize commands. */ -int hwicap_command_desync(struct hwicap_drvdata *drvdata) +static int hwicap_command_desync(struct hwicap_drvdata *drvdata) { u32 buffer[4]; u32 index = 0; @@ -228,51 +229,18 @@ int hwicap_command_desync(struct hwicap_drvdata *drvdata) } /** - * hwicap_command_capture: Send a CAPTURE command to the ICAP port. - * @parameter drvdata: a pointer to the drvdata. - * - * This command captures all of the flip flop states so they will be - * available during readback. One can use this command instead of - * enabling the CAPTURE block in the design. - */ -int hwicap_command_capture(struct hwicap_drvdata *drvdata) -{ - u32 buffer[7]; - u32 index = 0; - - /* - * Create the data to be written to the ICAP. - */ - buffer[index++] = XHI_DUMMY_PACKET; - buffer[index++] = XHI_SYNC_PACKET; - buffer[index++] = XHI_NOOP_PACKET; - buffer[index++] = hwicap_type_1_write(drvdata->config_regs->CMD) | 1; - buffer[index++] = XHI_CMD_GCAPTURE; - buffer[index++] = XHI_DUMMY_PACKET; - buffer[index++] = XHI_DUMMY_PACKET; - - /* - * Write the data to the FIFO and intiate the transfer of data - * present in the FIFO to the ICAP device. - */ - return drvdata->config->set_configuration(drvdata, - &buffer[0], index); - -} - -/** - * hwicap_get_configuration_register: Query a configuration register. - * @parameter drvdata: a pointer to the drvdata. - * @parameter reg: a constant which represents the configuration + * hwicap_get_configuration_register - Query a configuration register. + * @drvdata: a pointer to the drvdata. + * @reg: a constant which represents the configuration * register value to be returned. * Examples: XHI_IDCODE, XHI_FLR. - * @parameter RegData: returns the value of the register. + * @reg_data: returns the value of the register. * * Sends a query packet to the ICAP and then receives the response. * The icap is left in Synched state. */ -int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata, - u32 reg, u32 *RegData) +static int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata, + u32 reg, u32 *reg_data) { int status; u32 buffer[6]; @@ -300,14 +268,14 @@ int hwicap_get_configuration_register(struct hwicap_drvdata *drvdata, /* * Read the configuration register */ - status = drvdata->config->get_configuration(drvdata, RegData, 1); + status = drvdata->config->get_configuration(drvdata, reg_data, 1); if (status) return status; return 0; } -int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata) +static int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata) { int status; u32 idcode; @@ -344,7 +312,7 @@ int hwicap_initialize_hwicap(struct hwicap_drvdata *drvdata) } static ssize_t -hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos) +hwicap_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { struct hwicap_drvdata *drvdata = file->private_data; ssize_t bytes_to_read = 0; @@ -353,8 +321,9 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos) u32 bytes_remaining; int status; - if (down_interruptible(&drvdata->sem)) - return -ERESTARTSYS; + status = mutex_lock_interruptible(&drvdata->sem); + if (status) + return status; if (drvdata->read_buffer_in_use) { /* If there are leftover bytes in the buffer, just */ @@ -370,8 +339,9 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos) goto error; } drvdata->read_buffer_in_use -= bytes_to_read; - memcpy(drvdata->read_buffer + bytes_to_read, - drvdata->read_buffer, 4 - bytes_to_read); + memmove(drvdata->read_buffer, + drvdata->read_buffer + bytes_to_read, + 4 - bytes_to_read); } else { /* Get new data from the ICAP, and return was was requested. */ kbuf = (u32 *) get_zeroed_page(GFP_KERNEL); @@ -414,18 +384,20 @@ hwicap_read(struct file *file, char *buf, size_t count, loff_t *ppos) status = -EFAULT; goto error; } - memcpy(kbuf, drvdata->read_buffer, bytes_remaining); + memcpy(drvdata->read_buffer, + kbuf, + bytes_remaining); drvdata->read_buffer_in_use = bytes_remaining; free_page((unsigned long)kbuf); } status = bytes_to_read; error: - up(&drvdata->sem); + mutex_unlock(&drvdata->sem); return status; } static ssize_t -hwicap_write(struct file *file, const char *buf, +hwicap_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { struct hwicap_drvdata *drvdata = file->private_data; @@ -435,8 +407,9 @@ hwicap_write(struct file *file, const char *buf, ssize_t len; ssize_t status; - if (down_interruptible(&drvdata->sem)) - return -ERESTARTSYS; + status = mutex_lock_interruptible(&drvdata->sem); + if (status) + return status; left += drvdata->write_buffer_in_use; @@ -465,7 +438,7 @@ hwicap_write(struct file *file, const char *buf, memcpy(kbuf, drvdata->write_buffer, drvdata->write_buffer_in_use); if (copy_from_user( - (((char *)kbuf) + (drvdata->write_buffer_in_use)), + (((char *)kbuf) + drvdata->write_buffer_in_use), buf + written, len - (drvdata->write_buffer_in_use))) { free_page((unsigned long)kbuf); @@ -508,7 +481,7 @@ hwicap_write(struct file *file, const char *buf, free_page((unsigned long)kbuf); status = written; error: - up(&drvdata->sem); + mutex_unlock(&drvdata->sem); return status; } @@ -519,8 +492,9 @@ static int hwicap_open(struct inode *inode, struct file *file) drvdata = container_of(inode->i_cdev, struct hwicap_drvdata, cdev); - if (down_interruptible(&drvdata->sem)) - return -ERESTARTSYS; + status = mutex_lock_interruptible(&drvdata->sem); + if (status) + return status; if (drvdata->is_open) { status = -EBUSY; @@ -539,7 +513,7 @@ static int hwicap_open(struct inode *inode, struct file *file) drvdata->is_open = 1; error: - up(&drvdata->sem); + mutex_unlock(&drvdata->sem); return status; } @@ -549,8 +523,7 @@ static int hwicap_release(struct inode *inode, struct file *file) int i; int status = 0; - if (down_interruptible(&drvdata->sem)) - return -ERESTARTSYS; + mutex_lock(&drvdata->sem); if (drvdata->write_buffer_in_use) { /* Flush write buffer. */ @@ -569,7 +542,7 @@ static int hwicap_release(struct inode *inode, struct file *file) error: drvdata->is_open = 0; - up(&drvdata->sem); + mutex_unlock(&drvdata->sem); return status; } @@ -592,31 +565,36 @@ static int __devinit hwicap_setup(struct device *dev, int id, dev_info(dev, "Xilinx icap port driver\n"); + mutex_lock(&icap_sem); + if (id < 0) { for (id = 0; id < HWICAP_DEVICES; id++) if (!probed_devices[id]) break; } if (id < 0 || id >= HWICAP_DEVICES) { + mutex_unlock(&icap_sem); dev_err(dev, "%s%i too large\n", DRIVER_NAME, id); return -EINVAL; } if (probed_devices[id]) { + mutex_unlock(&icap_sem); dev_err(dev, "cannot assign to %s%i; it is already in use\n", DRIVER_NAME, id); return -EBUSY; } probed_devices[id] = 1; + mutex_unlock(&icap_sem); devt = MKDEV(xhwicap_major, xhwicap_minor + id); - drvdata = kmalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL); + drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL); if (!drvdata) { dev_err(dev, "Couldn't allocate device private record\n"); - return -ENOMEM; + retval = -ENOMEM; + goto failed0; } - memset((void *)drvdata, 0, sizeof(struct hwicap_drvdata)); dev_set_drvdata(dev, (void *)drvdata); if (!regs_res) { @@ -648,7 +626,7 @@ static int __devinit hwicap_setup(struct device *dev, int id, drvdata->config = config; drvdata->config_regs = config_regs; - init_MUTEX(&drvdata->sem); + mutex_init(&drvdata->sem); drvdata->is_open = 0; dev_info(dev, "ioremap %lx to %p with size %x\n", @@ -663,7 +641,7 @@ static int __devinit hwicap_setup(struct device *dev, int id, goto failed3; } /* devfs_mk_cdev(devt, S_IFCHR|S_IRUGO|S_IWUGO, DRIVER_NAME); */ - class_device_create(icap_class, NULL, devt, NULL, DRIVER_NAME); + device_create(icap_class, dev, devt, "%s%d", DRIVER_NAME, id); return 0; /* success */ failed3: @@ -675,6 +653,11 @@ static int __devinit hwicap_setup(struct device *dev, int id, failed1: kfree(drvdata); + failed0: + mutex_lock(&icap_sem); + probed_devices[id] = 0; + mutex_unlock(&icap_sem); + return retval; } @@ -699,14 +682,16 @@ static int __devexit hwicap_remove(struct device *dev) if (!drvdata) return 0; - class_device_destroy(icap_class, drvdata->devt); + device_destroy(icap_class, drvdata->devt); cdev_del(&drvdata->cdev); iounmap(drvdata->base_address); release_mem_region(drvdata->mem_start, drvdata->mem_size); kfree(drvdata); dev_set_drvdata(dev, NULL); - probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0; + mutex_lock(&icap_sem); + probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0; + mutex_unlock(&icap_sem); return 0; /* success */ } @@ -821,28 +806,29 @@ static struct of_platform_driver hwicap_of_driver = { }; /* Registration helpers to keep the number of #ifdefs to a minimum */ -static inline int __devinit hwicap_of_register(void) +static inline int __init hwicap_of_register(void) { pr_debug("hwicap: calling of_register_platform_driver()\n"); return of_register_platform_driver(&hwicap_of_driver); } -static inline void __devexit hwicap_of_unregister(void) +static inline void __exit hwicap_of_unregister(void) { of_unregister_platform_driver(&hwicap_of_driver); } #else /* CONFIG_OF */ /* CONFIG_OF not enabled; do nothing helpers */ -static inline int __devinit hwicap_of_register(void) { return 0; } -static inline void __devexit hwicap_of_unregister(void) { } +static inline int __init hwicap_of_register(void) { return 0; } +static inline void __exit hwicap_of_unregister(void) { } #endif /* CONFIG_OF */ -static int __devinit hwicap_module_init(void) +static int __init hwicap_module_init(void) { dev_t devt; int retval; icap_class = class_create(THIS_MODULE, "xilinx_config"); + mutex_init(&icap_sem); if (xhwicap_major) { devt = MKDEV(xhwicap_major, xhwicap_minor); @@ -883,7 +869,7 @@ static int __devinit hwicap_module_init(void) return retval; } -static void __devexit hwicap_module_cleanup(void) +static void __exit hwicap_module_cleanup(void) { dev_t devt = MKDEV(xhwicap_major, xhwicap_minor); diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h index ae771cac162..405fee7e189 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h @@ -48,9 +48,9 @@ struct hwicap_drvdata { u8 write_buffer[4]; u32 read_buffer_in_use; /* Always in [0,3] */ u8 read_buffer[4]; - u32 mem_start; /* phys. address of the control registers */ - u32 mem_end; /* phys. address of the control registers */ - u32 mem_size; + resource_size_t mem_start;/* phys. address of the control registers */ + resource_size_t mem_end; /* phys. address of the control registers */ + resource_size_t mem_size; void __iomem *base_address;/* virt. address of the control registers */ struct device *dev; @@ -61,7 +61,7 @@ struct hwicap_drvdata { const struct config_registers *config_regs; void *private_data; bool is_open; - struct semaphore sem; + struct mutex sem; }; struct hwicap_driver_config { @@ -164,29 +164,29 @@ struct config_registers { #define XHI_DISABLED_AUTO_CRC 0x0000DEFCUL /** - * hwicap_type_1_read: Generates a Type 1 read packet header. - * @parameter: Register is the address of the register to be read back. + * hwicap_type_1_read - Generates a Type 1 read packet header. + * @reg: is the address of the register to be read back. * * Generates a Type 1 read packet header, which is used to indirectly * read registers in the configuration logic. This packet must then * be sent through the icap device, and a return packet received with * the information. **/ -static inline u32 hwicap_type_1_read(u32 Register) +static inline u32 hwicap_type_1_read(u32 reg) { return (XHI_TYPE_1 << XHI_TYPE_SHIFT) | - (Register << XHI_REGISTER_SHIFT) | + (reg << XHI_REGISTER_SHIFT) | (XHI_OP_READ << XHI_OP_SHIFT); } /** - * hwicap_type_1_write: Generates a Type 1 write packet header - * @parameter: Register is the address of the register to be read back. + * hwicap_type_1_write - Generates a Type 1 write packet header + * @reg: is the address of the register to be read back. **/ -static inline u32 hwicap_type_1_write(u32 Register) +static inline u32 hwicap_type_1_write(u32 reg) { return (XHI_TYPE_1 << XHI_TYPE_SHIFT) | - (Register << XHI_REGISTER_SHIFT) | + (reg << XHI_REGISTER_SHIFT) | (XHI_OP_WRITE << XHI_OP_SHIFT); } -- cgit v1.2.3-70-g09d2 From 21e43188f272c7fd9efc84b8244c0b1dfccaa105 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 28 Feb 2008 11:23:17 -0800 Subject: [IPCOMP]: Disable BH on output when using shared tfm Because we use shared tfm objects in order to conserve memory, (each tfm requires 128K of vmalloc memory), BH needs to be turned off on output as that can occur in process context. Previously this was done implicitly by the xfrm output code. That was lost when it became lockless. So we need to add the BH disabling to IPComp directly. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv4/ipcomp.c | 5 ++++- net/ipv6/ipcomp6.c | 2 ++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c index ae1f45fc23b..58b60b2fb01 100644 --- a/net/ipv4/ipcomp.c +++ b/net/ipv4/ipcomp.c @@ -108,8 +108,11 @@ static int ipcomp_compress(struct xfrm_state *x, struct sk_buff *skb) const int cpu = get_cpu(); u8 *scratch = *per_cpu_ptr(ipcomp_scratches, cpu); struct crypto_comp *tfm = *per_cpu_ptr(ipcd->tfms, cpu); - int err = crypto_comp_compress(tfm, start, plen, scratch, &dlen); + int err; + local_bh_disable(); + err = crypto_comp_compress(tfm, start, plen, scratch, &dlen); + local_bh_enable(); if (err) goto out; diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c index b90039593a7..e3dcfa2f436 100644 --- a/net/ipv6/ipcomp6.c +++ b/net/ipv6/ipcomp6.c @@ -146,7 +146,9 @@ static int ipcomp6_output(struct xfrm_state *x, struct sk_buff *skb) scratch = *per_cpu_ptr(ipcomp6_scratches, cpu); tfm = *per_cpu_ptr(ipcd->tfms, cpu); + local_bh_disable(); err = crypto_comp_compress(tfm, start, plen, scratch, &dlen); + local_bh_enable(); if (err || (dlen + sizeof(*ipch)) >= plen) { put_cpu(); goto out_ok; -- cgit v1.2.3-70-g09d2 From c14423fe585a5937db6e2eece4b79486521103be Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:49:42 -0800 Subject: [BNX2X]: Spelling fixes Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 119 ++++++++++++++++++++++++---------------------------- drivers/net/bnx2x.h | 2 +- 2 files changed, 56 insertions(+), 65 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index afc7f34b1dc..7b2d7898f06 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -10,13 +10,13 @@ * Based on code from Michael Chan's bnx2 driver * UDP CSUM errata workaround by Arik Gendelman * Slowpath rework by Vladislav Zolotarov - * Statistics and Link managment by Yitchak Gertner + * Statistics and Link management by Yitchak Gertner * */ /* define this to make the driver freeze on error * to allow getting debug info - * (you will need to reboot afterwords) + * (you will need to reboot afterwards) */ /*#define BNX2X_STOP_ON_ERROR*/ @@ -71,7 +71,7 @@ #define TX_TIMEOUT (5*HZ) static char version[] __devinitdata = - "Broadcom NetXtreme II 577xx 10Gigabit Ethernet Driver " + "Broadcom NetXtreme II 5771X 10Gigabit Ethernet Driver " DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; MODULE_AUTHOR("Eliezer Tamir "); @@ -94,8 +94,8 @@ module_param(debug, int, 0); MODULE_PARM_DESC(use_inta, "use INT#A instead of MSI-X"); MODULE_PARM_DESC(poll, "use polling (for debug)"); MODULE_PARM_DESC(onefunc, "enable only first function"); -MODULE_PARM_DESC(nomcp, "ignore managment CPU (Implies onefunc)"); -MODULE_PARM_DESC(debug, "defualt debug msglevel"); +MODULE_PARM_DESC(nomcp, "ignore management CPU (Implies onefunc)"); +MODULE_PARM_DESC(debug, "default debug msglevel"); #ifdef BNX2X_MULTI module_param(use_multi, int, 0); @@ -341,6 +341,7 @@ static int bnx2x_mc_assert(struct bnx2x *bp) } return rc; } + static void bnx2x_fw_dump(struct bnx2x *bp) { u32 mark, offset; @@ -491,7 +492,7 @@ static void bnx2x_disable_int_sync(struct bnx2x *bp) int i; atomic_inc(&bp->intr_sem); - /* prevent the HW from sending interrupts*/ + /* prevent the HW from sending interrupts */ bnx2x_disable_int(bp); /* make sure all ISRs are done */ @@ -775,6 +776,7 @@ static void bnx2x_sp_event(struct bnx2x_fastpath *fp, mb(); /* force bnx2x_wait_ramrod to see the change */ return; } + switch (command | bp->state) { case (RAMROD_CMD_ID_ETH_PORT_SETUP | BNX2X_STATE_OPENING_WAIT4_PORT): DP(NETIF_MSG_IFUP, "got setup ramrod\n"); @@ -1471,7 +1473,7 @@ static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val) } /* - * link managment + * link management */ static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status) @@ -1482,7 +1484,7 @@ static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status) bp->flow_ctrl = 0; - /* reolve from gp_status in case of AN complete and not sgmii */ + /* resolve from gp_status in case of AN complete and not sgmii */ if ((bp->req_autoneg & AUTONEG_FLOW_CTRL) && (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) && (!(bp->phy_flags & PHY_SGMII_FLAG)) && @@ -1680,7 +1682,7 @@ static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g) int port = bp->port; /* first reset all status - * we asume only one line will be change at a time */ + * we assume only one line will be change at a time */ bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, (NIG_XGXS0_LINK_STATUS | NIG_SERDES0_LINK_STATUS | @@ -1819,7 +1821,7 @@ static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb) u32 wb_write[2]; u32 val; - DP(NETIF_MSG_LINK, "enableing BigMAC\n"); + DP(NETIF_MSG_LINK, "enabling BigMAC\n"); /* reset and unreset the BigMac */ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); @@ -1940,7 +1942,7 @@ static void bnx2x_emac_enable(struct bnx2x *bp) u32 val; int timeout; - DP(NETIF_MSG_LINK, "enableing EMAC\n"); + DP(NETIF_MSG_LINK, "enabling EMAC\n"); /* reset and unreset the emac core */ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port)); @@ -2033,7 +2035,7 @@ static void bnx2x_emac_enable(struct bnx2x *bp) EMAC_TX_MODE_EXT_PAUSE_EN); } - /* KEEP_VLAN_TAG, promiscous */ + /* KEEP_VLAN_TAG, promiscuous */ val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE); val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS; EMAC_WR(EMAC_REG_EMAC_RX_MODE, val); @@ -2161,7 +2163,6 @@ static void bnx2x_pbf_update(struct bnx2x *bp) u32 count = 1000; u32 pause = 0; - /* disable port */ REG_WR(bp, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port*4, 0x1); @@ -2803,7 +2804,7 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp) bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, NIG_MASK_MI_INT); - DP(NETIF_MSG_LINK, "enabled extenal phy int\n"); + DP(NETIF_MSG_LINK, "enabled external phy int\n"); bp->phy_addr = ext_phy_type; bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, @@ -2824,7 +2825,7 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp) bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, NIG_MASK_MI_INT); - DP(NETIF_MSG_LINK, "enabled extenal phy int\n"); + DP(NETIF_MSG_LINK, "enabled external phy int\n"); bp->phy_addr = ext_phy_type; bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, @@ -2857,7 +2858,7 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp) bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, NIG_MASK_MI_INT); - DP(NETIF_MSG_LINK, "enabled extenal phy int\n"); + DP(NETIF_MSG_LINK, "enabled external phy int\n"); break; default: @@ -2994,13 +2995,13 @@ static void bnx2x_link_initialize(struct bnx2x *bp) /* AN enabled */ bnx2x_set_brcm_cl37_advertisment(bp); - /* program duplex & pause advertisment (for aneg) */ + /* program duplex & pause advertisement (for aneg) */ bnx2x_set_ieee_aneg_advertisment(bp); /* enable autoneg */ bnx2x_set_autoneg(bp); - /* enalbe and restart AN */ + /* enable and restart AN */ bnx2x_restart_autoneg(bp); } @@ -3158,7 +3159,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid, int port = bp->port; DP(NETIF_MSG_TIMER, - "spe (%x:%x) command %x hw_cid %x data (%x:%x) left %x\n", + "spe (%x:%x) command %d hw_cid %x data (%x:%x) left %x\n", (u32)U64_HI(bp->spq_mapping), (u32)(U64_LO(bp->spq_mapping) + (void *)bp->spq_prod_bd - (void *)bp->spq), command, HW_CID(bp, cid), data_hi, data_lo, bp->spq_left); @@ -3464,7 +3465,7 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) HW_PRTY_ASSERT_SET_1) || (attn.sig[2] & group_mask.sig[2] & HW_PRTY_ASSERT_SET_2)) - BNX2X_ERR("FATAL HW block parity atention\n"); + BNX2X_ERR("FATAL HW block parity attention\n"); } } @@ -3906,7 +3907,7 @@ static void bnx2x_stop_stats(struct bnx2x *bp) while (bp->stats_state != STATS_STATE_DISABLE) { if (!timeout) { - BNX2X_ERR("timeout wating for stats stop\n"); + BNX2X_ERR("timeout waiting for stats stop\n"); break; } timeout--; @@ -4626,7 +4627,7 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp) fp->rx_bd_prod = fp->rx_comp_prod = ring_prod; fp->rx_pkt = fp->rx_calls = 0; - /* Warning! this will genrate an interrupt (to the TSTORM) */ + /* Warning! this will generate an interrupt (to the TSTORM) */ /* must only be done when chip is initialized */ REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_RCQ_PROD_OFFSET(port, j), ring_prod); @@ -4850,7 +4851,7 @@ static void bnx2x_init_internal(struct bnx2x *bp) /* DP(NETIF_MSG_IFUP, "tstorm_config: 0x%08x\n", (*(u32 *)&tstorm_config)); */ - bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx untill link is up */ + bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx until link is up */ bnx2x_set_storm_rx_mode(bp); for_each_queue(bp, i) @@ -5359,7 +5360,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) REG_RD(bp, USEM_REG_PASSIVE_BUFFER + 8); #endif bnx2x_init_block(bp, QM_COMMON_START, QM_COMMON_END); - /* softrest pulse */ + /* soft reset pulse */ REG_WR(bp, QM_REG_SOFT_RESET, 1); REG_WR(bp, QM_REG_SOFT_RESET, 0); @@ -5413,7 +5414,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) REG_WR(bp, SRC_REG_SOFT_RST, 1); for (i = SRC_REG_KEYRSS0_0; i <= SRC_REG_KEYRSS1_9; i += 4) { REG_WR(bp, i, 0xc0cac01a); - /* TODO: repleace with something meaningfull */ + /* TODO: replace with something meaningful */ } /* SRCH COMMON comes here */ REG_WR(bp, SRC_REG_SOFT_RST, 0); @@ -5647,7 +5648,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) bnx2x_link_reset(bp); - /* Reset pciex errors for debug */ + /* Reset PCIE errors for debug */ REG_WR(bp, 0x2114, 0xffffffff); REG_WR(bp, 0x2120, 0xffffffff); REG_WR(bp, 0x2814, 0xffffffff); @@ -5681,8 +5682,7 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) return 0; } - -/* send the MCP a request, block untill there is a reply */ +/* send the MCP a request, block until there is a reply */ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command) { u32 rc = 0; @@ -5869,7 +5869,7 @@ static int bnx2x_alloc_mem(struct bnx2x *bp) for (i = 0; i < 16*1024; i += 64) * (u64 *)((char *)bp->t2 + i + 56) = bp->t2_mapping + i + 64; - /* now sixup the last line in the block to point to the next block */ + /* now fixup the last line in the block to point to the next block */ *(u64 *)((char *)bp->t2 + 1024*16-8) = bp->t2_mapping; /* Timer block array (MAX_CONN*8) phys uncached for now 1024 conns */ @@ -5950,11 +5950,11 @@ static void bnx2x_free_msix_irqs(struct bnx2x *bp) int i; free_irq(bp->msix_table[0].vector, bp->dev); - DP(NETIF_MSG_IFDOWN, "rleased sp irq (%d)\n", + DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n", bp->msix_table[0].vector); for_each_queue(bp, i) { - DP(NETIF_MSG_IFDOWN, "about to rlease fp #%d->%d irq " + DP(NETIF_MSG_IFDOWN, "about to release fp #%d->%d irq " "state(%x)\n", i, bp->msix_table[i + 1].vector, bnx2x_fp(bp, i, state)); @@ -6010,7 +6010,6 @@ static int bnx2x_enable_msix(struct bnx2x *bp) static int bnx2x_req_msix_irqs(struct bnx2x *bp) { - int i, rc; DP(NETIF_MSG_IFUP, "about to request sp irq\n"); @@ -6109,8 +6108,8 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx, /* can take a while if any port is running */ int timeout = 500; - /* DP("waiting for state to become %d on IDX [%d]\n", - state, sb_idx); */ + DP(NETIF_MSG_IFUP, "%s for state to become %x on IDX [%d]\n", + poll ? "polling" : "waiting", state, idx); might_sleep(); @@ -6136,7 +6135,6 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx, } - /* timeout! */ BNX2X_ERR("timeout waiting for ramrod %d on %d\n", state, idx); return -EBUSY; @@ -6146,7 +6144,7 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx, static int bnx2x_setup_leading(struct bnx2x *bp) { - /* reset IGU staae */ + /* reset IGU state */ bnx2x_ack_sb(bp, DEF_SB_ID, CSTORM_ID, 0, IGU_INT_ENABLE, 0); /* SETUP ramrod */ @@ -6196,18 +6194,15 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) rc = FW_MSG_CODE_DRV_LOAD_COMMON; } - DP(NETIF_MSG_IFUP, "set number of queues to %d\n", bp->num_queues); - /* if we can't use msix we only need one fp, * so try to enable msix with the requested number of fp's * and fallback to inta with one fp */ if (req_irq) { - if (use_inta) { bp->num_queues = 1; } else { - if (use_multi > 1 && use_multi <= 16) + if ((use_multi > 1) && (use_multi <= 16)) /* user requested number */ bp->num_queues = use_multi; else if (use_multi == 1) @@ -6216,15 +6211,17 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) bp->num_queues = 1; if (bnx2x_enable_msix(bp)) { - /* faild to enable msix */ + /* failed to enable msix */ bp->num_queues = 1; if (use_multi) - BNX2X_ERR("Muti requested but failed" + BNX2X_ERR("Multi requested but failed" " to enable MSI-X\n"); } } } + DP(NETIF_MSG_IFUP, "set number of queues to %d\n", bp->num_queues); + if (bnx2x_alloc_mem(bp)) return -ENOMEM; @@ -6257,12 +6254,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) atomic_set(&bp->intr_sem, 0); - /* Reenable SP tasklet */ - /*if (bp->sp_task_en) { */ - /* tasklet_enable(&bp->sp_task);*/ - /*} else { */ - /* bp->sp_task_en = 1; */ - /*} */ /* Setup NIC internals and enable interrupts */ bnx2x_nic_init(bp); @@ -6401,14 +6392,14 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index) int rc; - /* halt the connnection */ + /* halt the connection */ bp->fp[index].state = BNX2X_FP_STATE_HALTING; bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, index, 0, 0, 0); rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, index, &(bp->fp[index].state), 1); - if (rc) /* timout */ + if (rc) /* timeout */ return rc; /* delete cfc entry */ @@ -6423,7 +6414,7 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index) static void bnx2x_stop_leading(struct bnx2x *bp) { - /* if the other port is hadling traffic, + /* if the other port is handling traffic, this can take a lot of time */ int timeout = 500; @@ -6471,7 +6462,7 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int fre_irq) msleep(1); /* Delete the timer: do it before disabling interrupts, as it - may be stil STAT_QUERY ramrod pending after stopping the timer */ + may be still STAT_QUERY ramrod pending after stopping the timer */ del_timer_sync(&bp->timer); /* Wait until stat ramrod returns and all SP tasks complete */ @@ -6932,7 +6923,7 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp) val = SHMEM_RD(bp, validity_map[port]); if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) - != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) + != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) BNX2X_ERR("MCP validity signature bad\n"); bp->fw_seq = (SHMEM_RD(bp, drv_fw_mb[port].drv_mb_header) & @@ -7452,13 +7443,13 @@ static int bnx2x_nvram_read(struct bnx2x *bp, u32 offset, u8 *ret_buf, if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) { DP(NETIF_MSG_NVM, - "Invalid paramter: offset 0x%x buf_size 0x%x\n", + "Invalid parameter: offset 0x%x buf_size 0x%x\n", offset, buf_size); return -EINVAL; } if (offset + buf_size > bp->flash_size) { - DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +" + DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +" " buf_size (0x%x) > flash_size (0x%x)\n", offset, buf_size, bp->flash_size); return -EINVAL; @@ -7568,7 +7559,7 @@ static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf, u32 val; if (offset + buf_size > bp->flash_size) { - DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +" + DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +" " buf_size (0x%x) > flash_size (0x%x)\n", offset, buf_size, bp->flash_size); return -EINVAL; @@ -7621,13 +7612,13 @@ static int bnx2x_nvram_write(struct bnx2x *bp, u32 offset, u8 *data_buf, if ((offset & 0x03) || (buf_size & 0x03) || (buf_size == 0)) { DP(NETIF_MSG_NVM, - "Invalid paramter: offset 0x%x buf_size 0x%x\n", + "Invalid parameter: offset 0x%x buf_size 0x%x\n", offset, buf_size); return -EINVAL; } if (offset + buf_size > bp->flash_size) { - DP(NETIF_MSG_NVM, "Invalid paramter: offset (0x%x) +" + DP(NETIF_MSG_NVM, "Invalid parameter: offset (0x%x) +" " buf_size (0x%x) > flash_size (0x%x)\n", offset, buf_size, bp->flash_size); return -EINVAL; @@ -8314,7 +8305,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) ETH_TX_BD_ETH_ADDR_TYPE_SHIFT); tx_bd->general_data |= 1; /* header nbd */ - /* remeber the first bd of the packet */ + /* remember the first bd of the packet */ tx_buf->first_bd = bd_prod; DP(NETIF_MSG_TX_QUEUED, @@ -8427,7 +8418,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_bd->vlan = cpu_to_le16(pkt_prod); /* this marks the bd * as one that has no individual mapping - * the FW ignors this flag in a bd not maked start + * the FW ignores this flag in a bd not marked start */ tx_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_SW_LSO; DP(NETIF_MSG_TX_QUEUED, @@ -8584,7 +8575,7 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) case SIOCGMIIPHY: data->phy_id = bp->phy_addr; - /* fallthru */ + /* fallthrough */ case SIOCGMIIREG: { u32 mii_regval; @@ -8633,7 +8624,7 @@ static int bnx2x_change_mtu(struct net_device *dev, int new_mtu) return -EINVAL; /* This does not race with packet allocation - * because the actuall alloc size is + * because the actual alloc size is * only updated as part of load */ dev->mtu = new_mtu; @@ -8813,7 +8804,7 @@ static int __devinit bnx2x_init_board(struct pci_dev *pdev, bnx2x_get_hwinfo(bp); if (CHIP_REV(bp) == CHIP_REV_FPGA) { - printk(KERN_ERR PFX "FPGA detacted. MCP disabled," + printk(KERN_ERR PFX "FPGA detected. MCP disabled," " will only init first device\n"); onefunc = 1; nomcp = 1; @@ -8944,7 +8935,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, rc = register_netdev(dev); if (rc) { - printk(KERN_ERR PFX "Cannot register net device\n"); + dev_err(&pdev->dev, "Cannot register net device\n"); if (bp->regview) iounmap(bp->regview); if (bp->doorbells) diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 4f7ae6f7745..7a01668e397 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -517,7 +517,7 @@ struct bnx2x { */ u8 stat_pending; - /* End of fileds used in the performance code paths */ + /* End of fields used in the performance code paths */ int panic; int msglevel; -- cgit v1.2.3-70-g09d2 From 250479504ff7d7e8c7d5cf85bedd40fb8d725429 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:50:16 -0800 Subject: [BNX2X]: Correct init_one() Correct PCI-E info printed by init_one() In one case it failed to free the netdev. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 41 ++++++++++++++++++++++++++--------------- drivers/net/bnx2x.h | 5 +++++ 2 files changed, 31 insertions(+), 15 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 7b2d7898f06..77867161968 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -8873,14 +8873,32 @@ err_out: return rc; } +static int __devinit bnx2x_get_pcie_width(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL); + + val = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT; + return val; +} + +/* return value of 1=2.5GHz 2=5GHz */ +static int __devinit bnx2x_get_pcie_speed(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, PCICFG_OFFSET + PCICFG_LINK_CONTROL); + + val = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT; + return val; +} + static int __devinit bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int version_printed; struct net_device *dev = NULL; struct bnx2x *bp; - int rc, i; + int rc; int port = PCI_FUNC(pdev->devfn); + DECLARE_MAC_BUF(mac); if (version_printed++ == 0) printk(KERN_INFO "%s", version); @@ -8897,6 +8915,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, if (port && onefunc) { printk(KERN_ERR PFX "second function disabled. exiting\n"); + free_netdev(dev); return 0; } @@ -8950,22 +8969,14 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, pci_set_drvdata(pdev, dev); bp->name = board_info[ent->driver_data].name; - printk(KERN_INFO "%s: %s (%c%d) PCI%s %s %dMHz " - "found at mem %lx, IRQ %d, ", - dev->name, bp->name, + printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx," + " IRQ %d, ", dev->name, bp->name, ((CHIP_ID(bp) & 0xf000) >> 12) + 'A', ((CHIP_ID(bp) & 0x0ff0) >> 4), - ((bp->flags & PCIX_FLAG) ? "-X" : ""), - ((bp->flags & PCI_32BIT_FLAG) ? "32-bit" : "64-bit"), - bp->bus_speed_mhz, - dev->base_addr, - bp->pdev->irq); - - printk("node addr "); - for (i = 0; i < 6; i++) - printk("%2.2x", dev->dev_addr[i]); - printk("\n"); - + bnx2x_get_pcie_width(bp), + (bnx2x_get_pcie_speed(bp) == 2) ? "5GHz (Gen2)" : "2.5GHz", + dev->base_addr, bp->pdev->irq); + printk(KERN_CONT "node addr %s\n", print_mac(mac, dev->dev_addr)); return 0; } diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 7a01668e397..ea9100855c5 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -867,6 +867,11 @@ struct bnx2x { DPM_TRIGER_TYPE); \ } while (0) +/* PCIE link and speed */ +#define PCICFG_LINK_WIDTH 0x1f00000 +#define PCICFG_LINK_WIDTH_SHIFT 20 +#define PCICFG_LINK_SPEED 0xf0000 +#define PCICFG_LINK_SPEED_SHIFT 16 /* stuff added to make the code fit 80Col */ -- cgit v1.2.3-70-g09d2 From f14106478e372e64be54a3cdab1e2fa83a5c8a35 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:51:50 -0800 Subject: [BNX2X]: Correct Link management Properly protect PHY access between two devices on the same board with a HW lock. Use GPIO to clear all previous configurations before changing link parameters. Shut down the external PHY in case of fan failure. Reducing the MDC/MDIO clock to 2.5MHz due to problems with some devices. Resolve the flow control response according to autoneg with external PHY. Unmasking all PHY interrupts in single write to prevent a race in the interrupts order. LASI indication fixes to work with peculiarities of PHYs. Disable MAC RX to avoid a HW bug when closing the MAC under traffic. Disable parallel detection on HiGig due to HW limitation. Updating the shared memory structure to work with the current bootcode. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 1711 ++++++++++++++++++++++++++++++++----------- drivers/net/bnx2x.h | 34 +- drivers/net/bnx2x_fw_defs.h | 2 +- drivers/net/bnx2x_hsi.h | 428 ++++++----- drivers/net/bnx2x_reg.h | 212 +++++- 5 files changed, 1736 insertions(+), 651 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 77867161968..5cd785064ba 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -1,6 +1,6 @@ /* bnx2x.c: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -65,7 +65,7 @@ #define DRV_MODULE_VERSION "0.40.15" #define DRV_MODULE_RELDATE "$DateTime: 2007/11/15 07:28:37 $" -#define BNX2X_BC_VER 0x040009 +#define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung. */ #define TX_TIMEOUT (5*HZ) @@ -78,7 +78,7 @@ MODULE_AUTHOR("Eliezer Tamir "); MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_MODULE_VERSION); -MODULE_INFO(cvs_version, "$Revision: #356 $"); +MODULE_INFO(cvs_version, "$Revision: #404 $"); static int use_inta; static int poll; @@ -1181,12 +1181,175 @@ static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits) return val; } +static int bnx2x_hw_lock(struct bnx2x *bp, u32 resource) +{ + u32 cnt; + u32 lock_status; + u32 resource_bit = (1 << resource); + u8 func = bp->port; + + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + DP(NETIF_MSG_HW, + "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return -EINVAL; + } + + /* Validating that the resource is not already taken */ + lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8); + if (lock_status & resource_bit) { + DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n", + lock_status, resource_bit); + return -EEXIST; + } + + /* Try for 1 second every 5ms */ + for (cnt = 0; cnt < 200; cnt++) { + /* Try to acquire the lock */ + REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8 + 4, + resource_bit); + lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8); + if (lock_status & resource_bit) + return 0; + + msleep(5); + } + DP(NETIF_MSG_HW, "Timeout\n"); + return -EAGAIN; +} + +static int bnx2x_hw_unlock(struct bnx2x *bp, u32 resource) +{ + u32 lock_status; + u32 resource_bit = (1 << resource); + u8 func = bp->port; + + /* Validating that the resource is within range */ + if (resource > HW_LOCK_MAX_RESOURCE_VALUE) { + DP(NETIF_MSG_HW, + "resource(0x%x) > HW_LOCK_MAX_RESOURCE_VALUE(0x%x)\n", + resource, HW_LOCK_MAX_RESOURCE_VALUE); + return -EINVAL; + } + + /* Validating that the resource is currently taken */ + lock_status = REG_RD(bp, MISC_REG_DRIVER_CONTROL_1 + func*8); + if (!(lock_status & resource_bit)) { + DP(NETIF_MSG_HW, "lock_status 0x%x resource_bit 0x%x\n", + lock_status, resource_bit); + return -EFAULT; + } + + REG_WR(bp, MISC_REG_DRIVER_CONTROL_1 + func*8, resource_bit); + return 0; +} + +static int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode) +{ + /* The GPIO should be swapped if swap register is set and active */ + int gpio_port = (REG_RD(bp, NIG_REG_PORT_SWAP) && + REG_RD(bp, NIG_REG_STRAP_OVERRIDE)) ^ bp->port; + int gpio_shift = gpio_num + + (gpio_port ? MISC_REGISTERS_GPIO_PORT_SHIFT : 0); + u32 gpio_mask = (1 << gpio_shift); + u32 gpio_reg; + + if (gpio_num > MISC_REGISTERS_GPIO_3) { + BNX2X_ERR("Invalid GPIO %d\n", gpio_num); + return -EINVAL; + } + + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_GPIO); + /* read GPIO and mask except the float bits */ + gpio_reg = (REG_RD(bp, MISC_REG_GPIO) & MISC_REGISTERS_GPIO_FLOAT); + + switch (mode) { + case MISC_REGISTERS_GPIO_OUTPUT_LOW: + DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output low\n", + gpio_num, gpio_shift); + /* clear FLOAT and set CLR */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_CLR_POS); + break; + + case MISC_REGISTERS_GPIO_OUTPUT_HIGH: + DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> output high\n", + gpio_num, gpio_shift); + /* clear FLOAT and set SET */ + gpio_reg &= ~(gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_SET_POS); + break; + + case MISC_REGISTERS_GPIO_INPUT_HI_Z : + DP(NETIF_MSG_LINK, "Set GPIO %d (shift %d) -> input\n", + gpio_num, gpio_shift); + /* set FLOAT */ + gpio_reg |= (gpio_mask << MISC_REGISTERS_GPIO_FLOAT_POS); + break; + + default: + break; + } + + REG_WR(bp, MISC_REG_GPIO, gpio_reg); + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_GPIO); + + return 0; +} + +static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode) +{ + u32 spio_mask = (1 << spio_num); + u32 spio_reg; + + if ((spio_num < MISC_REGISTERS_SPIO_4) || + (spio_num > MISC_REGISTERS_SPIO_7)) { + BNX2X_ERR("Invalid SPIO %d\n", spio_num); + return -EINVAL; + } + + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_SPIO); + /* read SPIO and mask except the float bits */ + spio_reg = (REG_RD(bp, MISC_REG_SPIO) & MISC_REGISTERS_SPIO_FLOAT); + + switch (mode) { + case MISC_REGISTERS_SPIO_OUTPUT_LOW : + DP(NETIF_MSG_LINK, "Set SPIO %d -> output low\n", spio_num); + /* clear FLOAT and set CLR */ + spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); + spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_CLR_POS); + break; + + case MISC_REGISTERS_SPIO_OUTPUT_HIGH : + DP(NETIF_MSG_LINK, "Set SPIO %d -> output high\n", spio_num); + /* clear FLOAT and set SET */ + spio_reg &= ~(spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); + spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_SET_POS); + break; + + case MISC_REGISTERS_SPIO_INPUT_HI_Z: + DP(NETIF_MSG_LINK, "Set SPIO %d -> input\n", spio_num); + /* set FLOAT */ + spio_reg |= (spio_mask << MISC_REGISTERS_SPIO_FLOAT_POS); + break; + + default: + break; + } + + REG_WR(bp, MISC_REG_SPIO, spio_reg); + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_SPIO); + + return 0; +} + static int bnx2x_mdio22_write(struct bnx2x *bp, u32 reg, u32 val) { - int rc; - u32 tmp, i; int port = bp->port; u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + u32 tmp; + int i, rc; /* DP(NETIF_MSG_HW, "phy_addr 0x%x reg 0x%x val 0x%08x\n", bp->phy_addr, reg, val); */ @@ -1238,8 +1401,8 @@ static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val) { int port = bp->port; u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 val, i; - int rc; + u32 val; + int i, rc; if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { @@ -1288,58 +1451,54 @@ static int bnx2x_mdio22_read(struct bnx2x *bp, u32 reg, u32 *ret_val) return rc; } -static int bnx2x_mdio45_write(struct bnx2x *bp, u32 reg, u32 addr, u32 val) +static int bnx2x_mdio45_ctrl_write(struct bnx2x *bp, u32 mdio_ctrl, + u32 phy_addr, u32 reg, u32 addr, u32 val) { - int rc = 0; - u32 tmp, i; - int port = bp->port; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - tmp &= ~EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp); - REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - udelay(40); - } + u32 tmp; + int i, rc = 0; - /* set clause 45 mode */ - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - tmp |= EMAC_MDIO_MODE_CLAUSE_45; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp); + /* set clause 45 mode, slow down the MDIO clock to 2.5MHz + * (a value of 49==0x31) and make sure that the AUTO poll is off + */ + tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + tmp &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT); + tmp |= (EMAC_MDIO_MODE_CLAUSE_45 | + (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp); + REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + udelay(40); /* address */ - tmp = ((bp->phy_addr << 21) | (reg << 16) | addr | + tmp = ((phy_addr << 21) | (reg << 16) | addr | EMAC_MDIO_COMM_COMMAND_ADDRESS | EMAC_MDIO_COMM_START_BUSY); - EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); for (i = 0; i < 50; i++) { udelay(10); - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM); + tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { udelay(5); break; } } - if (tmp & EMAC_MDIO_COMM_START_BUSY) { BNX2X_ERR("write phy register failed\n"); rc = -EBUSY; + } else { /* data */ - tmp = ((bp->phy_addr << 21) | (reg << 16) | val | + tmp = ((phy_addr << 21) | (reg << 16) | val | EMAC_MDIO_COMM_COMMAND_WRITE_45 | EMAC_MDIO_COMM_START_BUSY); - EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, tmp); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); for (i = 0; i < 50; i++) { udelay(10); - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM); + tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { udelay(5); break; @@ -1353,75 +1512,78 @@ static int bnx2x_mdio45_write(struct bnx2x *bp, u32 reg, u32 addr, u32 val) } } - /* unset clause 45 mode */ - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - tmp &= ~EMAC_MDIO_MODE_CLAUSE_45; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp); - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - - tmp = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); + /* unset clause 45 mode, set the MDIO clock to a faster value + * (0x13 => 6.25Mhz) and restore the AUTO poll if needed + */ + tmp = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + tmp &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT); + tmp |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT); + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) tmp |= EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, tmp); - } + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, tmp); return rc; } -static int bnx2x_mdio45_read(struct bnx2x *bp, u32 reg, u32 addr, - u32 *ret_val) +static int bnx2x_mdio45_write(struct bnx2x *bp, u32 phy_addr, u32 reg, + u32 addr, u32 val) { - int port = bp->port; - u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - u32 val, i; - int rc = 0; + u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { + return bnx2x_mdio45_ctrl_write(bp, emac_base, phy_addr, + reg, addr, val); +} - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - val &= ~EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val); - REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - udelay(40); - } +static int bnx2x_mdio45_ctrl_read(struct bnx2x *bp, u32 mdio_ctrl, + u32 phy_addr, u32 reg, u32 addr, + u32 *ret_val) +{ + u32 val; + int i, rc = 0; - /* set clause 45 mode */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - val |= EMAC_MDIO_MODE_CLAUSE_45; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val); + /* set clause 45 mode, slow down the MDIO clock to 2.5MHz + * (a value of 49==0x31) and make sure that the AUTO poll is off + */ + val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + val &= ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT); + val |= (EMAC_MDIO_MODE_CLAUSE_45 | + (49 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT)); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val); + REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + udelay(40); /* address */ - val = ((bp->phy_addr << 21) | (reg << 16) | addr | + val = ((phy_addr << 21) | (reg << 16) | addr | EMAC_MDIO_COMM_COMMAND_ADDRESS | EMAC_MDIO_COMM_START_BUSY); - EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); for (i = 0; i < 50; i++) { udelay(10); - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM); + val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); if (!(val & EMAC_MDIO_COMM_START_BUSY)) { udelay(5); break; } } - if (val & EMAC_MDIO_COMM_START_BUSY) { BNX2X_ERR("read phy register failed\n"); *ret_val = 0; rc = -EBUSY; + } else { /* data */ - val = ((bp->phy_addr << 21) | (reg << 16) | + val = ((phy_addr << 21) | (reg << 16) | EMAC_MDIO_COMM_COMMAND_READ_45 | EMAC_MDIO_COMM_START_BUSY); - EMAC_WR(EMAC_REG_EMAC_MDIO_COMM, val); + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); for (i = 0; i < 50; i++) { udelay(10); - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_COMM); + val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); if (!(val & EMAC_MDIO_COMM_START_BUSY)) { val &= EMAC_MDIO_COMM_DATA; break; @@ -1438,31 +1600,39 @@ static int bnx2x_mdio45_read(struct bnx2x *bp, u32 reg, u32 addr, *ret_val = val; } - /* unset clause 45 mode */ - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); - val &= ~EMAC_MDIO_MODE_CLAUSE_45; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val); - - if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { - - val = REG_RD(bp, emac_base + EMAC_REG_EMAC_MDIO_MODE); + /* unset clause 45 mode, set the MDIO clock to a faster value + * (0x13 => 6.25Mhz) and restore the AUTO poll if needed + */ + val = REG_RD(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + val &= ~(EMAC_MDIO_MODE_CLAUSE_45 | EMAC_MDIO_MODE_CLOCK_CNT); + val |= (0x13 << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT); + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) val |= EMAC_MDIO_MODE_AUTO_POLL; - EMAC_WR(EMAC_REG_EMAC_MDIO_MODE, val); - } + REG_WR(bp, mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, val); return rc; } -static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val) +static int bnx2x_mdio45_read(struct bnx2x *bp, u32 phy_addr, u32 reg, + u32 addr, u32 *ret_val) +{ + u32 emac_base = bp->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + + return bnx2x_mdio45_ctrl_read(bp, emac_base, phy_addr, + reg, addr, ret_val); +} + +static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 phy_addr, u32 reg, + u32 addr, u32 val) { int i; u32 rd_val; might_sleep(); for (i = 0; i < 10; i++) { - bnx2x_mdio45_write(bp, reg, addr, val); + bnx2x_mdio45_write(bp, phy_addr, reg, addr, val); msleep(5); - bnx2x_mdio45_read(bp, reg, addr, &rd_val); + bnx2x_mdio45_read(bp, phy_addr, reg, addr, &rd_val); /* if the read value is not the same as the value we wrote, we should write it again */ if (rd_val == val) @@ -1476,10 +1646,73 @@ static int bnx2x_mdio45_vwrite(struct bnx2x *bp, u32 reg, u32 addr, u32 val) * link management */ +static void bnx2x_pause_resolve(struct bnx2x *bp, u32 pause_result) +{ + switch (pause_result) { /* ASYM P ASYM P */ + case 0xb: /* 1 0 1 1 */ + bp->flow_ctrl = FLOW_CTRL_TX; + break; + + case 0xe: /* 1 1 1 0 */ + bp->flow_ctrl = FLOW_CTRL_RX; + break; + + case 0x5: /* 0 1 0 1 */ + case 0x7: /* 0 1 1 1 */ + case 0xd: /* 1 1 0 1 */ + case 0xf: /* 1 1 1 1 */ + bp->flow_ctrl = FLOW_CTRL_BOTH; + break; + + default: + break; + } +} + +static u8 bnx2x_ext_phy_resove_fc(struct bnx2x *bp) +{ + u32 ext_phy_addr; + u32 ld_pause; /* local */ + u32 lp_pause; /* link partner */ + u32 an_complete; /* AN complete */ + u32 pause_result; + u8 ret = 0; + + ext_phy_addr = ((bp->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + + /* read twice */ + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_STATUS, &an_complete); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_STATUS, &an_complete); + + if (an_complete & EXT_PHY_KR_AUTO_NEG_COMPLETE) { + ret = 1; + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_AUTO_NEG_ADVERT, &ld_pause); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_LP_AUTO_NEG, &lp_pause); + pause_result = (ld_pause & + EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 8; + pause_result |= (lp_pause & + EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK) >> 10; + DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n", + pause_result); + bnx2x_pause_resolve(bp, pause_result); + } + return ret; +} + static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status) { - u32 ld_pause; /* local driver */ - u32 lp_pause; /* link partner */ + u32 ld_pause; /* local driver */ + u32 lp_pause; /* link partner */ u32 pause_result; bp->flow_ctrl = 0; @@ -1501,45 +1734,57 @@ static void bnx2x_flow_ctrl_resolve(struct bnx2x *bp, u32 gp_status) pause_result |= (lp_pause & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7; DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result); + bnx2x_pause_resolve(bp, pause_result); + } else if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) || + !(bnx2x_ext_phy_resove_fc(bp))) { + /* forced speed */ + if (bp->req_autoneg & AUTONEG_FLOW_CTRL) { + switch (bp->req_flow_ctrl) { + case FLOW_CTRL_AUTO: + if (bp->dev->mtu <= 4500) + bp->flow_ctrl = FLOW_CTRL_BOTH; + else + bp->flow_ctrl = FLOW_CTRL_TX; + break; - switch (pause_result) { /* ASYM P ASYM P */ - case 0xb: /* 1 0 1 1 */ - bp->flow_ctrl = FLOW_CTRL_TX; - break; - - case 0xe: /* 1 1 1 0 */ - bp->flow_ctrl = FLOW_CTRL_RX; - break; + case FLOW_CTRL_TX: + bp->flow_ctrl = FLOW_CTRL_TX; + break; - case 0x5: /* 0 1 0 1 */ - case 0x7: /* 0 1 1 1 */ - case 0xd: /* 1 1 0 1 */ - case 0xf: /* 1 1 1 1 */ - bp->flow_ctrl = FLOW_CTRL_BOTH; - break; + case FLOW_CTRL_RX: + if (bp->dev->mtu <= 4500) + bp->flow_ctrl = FLOW_CTRL_RX; + break; - default: - break; - } + case FLOW_CTRL_BOTH: + if (bp->dev->mtu <= 4500) + bp->flow_ctrl = FLOW_CTRL_BOTH; + else + bp->flow_ctrl = FLOW_CTRL_TX; + break; - } else { /* forced mode */ - switch (bp->req_flow_ctrl) { - case FLOW_CTRL_AUTO: - if (bp->dev->mtu <= 4500) - bp->flow_ctrl = FLOW_CTRL_BOTH; - else - bp->flow_ctrl = FLOW_CTRL_TX; - break; + case FLOW_CTRL_NONE: + default: + break; + } + } else { /* forced mode */ + switch (bp->req_flow_ctrl) { + case FLOW_CTRL_AUTO: + DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while" + " req_autoneg 0x%x\n", + bp->req_flow_ctrl, bp->req_autoneg); + break; - case FLOW_CTRL_TX: - case FLOW_CTRL_RX: - case FLOW_CTRL_BOTH: - bp->flow_ctrl = bp->req_flow_ctrl; - break; + case FLOW_CTRL_TX: + case FLOW_CTRL_RX: + case FLOW_CTRL_BOTH: + bp->flow_ctrl = bp->req_flow_ctrl; + break; - case FLOW_CTRL_NONE: - default: - break; + case FLOW_CTRL_NONE: + default: + break; + } } } DP(NETIF_MSG_LINK, "flow_ctrl 0x%x\n", bp->flow_ctrl); @@ -1550,9 +1795,9 @@ static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status) bp->link_status = 0; if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) { - DP(NETIF_MSG_LINK, "link up\n"); + DP(NETIF_MSG_LINK, "phy link up\n"); - bp->link_up = 1; + bp->phy_link_up = 1; bp->link_status |= LINK_STATUS_LINK_UP; if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS) @@ -1661,20 +1906,20 @@ static void bnx2x_link_settings_status(struct bnx2x *bp, u32 gp_status) bp->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED; } else { /* link_down */ - DP(NETIF_MSG_LINK, "link down\n"); + DP(NETIF_MSG_LINK, "phy link down\n"); - bp->link_up = 0; + bp->phy_link_up = 0; bp->line_speed = 0; bp->duplex = DUPLEX_FULL; bp->flow_ctrl = 0; } - DP(NETIF_MSG_LINK, "gp_status 0x%x link_up %d\n" + DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %d\n" DP_LEVEL " line_speed %d duplex %d flow_ctrl 0x%x" " link_status 0x%x\n", - gp_status, bp->link_up, bp->line_speed, bp->duplex, bp->flow_ctrl, - bp->link_status); + gp_status, bp->phy_link_up, bp->line_speed, bp->duplex, + bp->flow_ctrl, bp->link_status); } static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g) @@ -1684,38 +1929,38 @@ static void bnx2x_link_int_ack(struct bnx2x *bp, int is_10g) /* first reset all status * we assume only one line will be change at a time */ bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - (NIG_XGXS0_LINK_STATUS | - NIG_SERDES0_LINK_STATUS | - NIG_STATUS_INTERRUPT_XGXS0_LINK10G)); - if (bp->link_up) { + (NIG_STATUS_XGXS0_LINK10G | + NIG_STATUS_XGXS0_LINK_STATUS | + NIG_STATUS_SERDES0_LINK_STATUS)); + if (bp->phy_link_up) { if (is_10g) { /* Disable the 10G link interrupt * by writing 1 to the status register */ - DP(NETIF_MSG_LINK, "10G XGXS link up\n"); + DP(NETIF_MSG_LINK, "10G XGXS phy link up\n"); bnx2x_bits_en(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - NIG_STATUS_INTERRUPT_XGXS0_LINK10G); + NIG_STATUS_XGXS0_LINK10G); } else if (bp->phy_flags & PHY_XGXS_FLAG) { /* Disable the link interrupt * by writing 1 to the relevant lane * in the status register */ - DP(NETIF_MSG_LINK, "1G XGXS link up\n"); + DP(NETIF_MSG_LINK, "1G XGXS phy link up\n"); bnx2x_bits_en(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, ((1 << bp->ser_lane) << - NIG_XGXS0_LINK_STATUS_SIZE)); + NIG_STATUS_XGXS0_LINK_STATUS_SIZE)); } else { /* SerDes */ - DP(NETIF_MSG_LINK, "SerDes link up\n"); + DP(NETIF_MSG_LINK, "SerDes phy link up\n"); /* Disable the link interrupt * by writing 1 to the status register */ bnx2x_bits_en(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - NIG_SERDES0_LINK_STATUS); + NIG_STATUS_SERDES0_LINK_STATUS); } } else { /* link_down */ @@ -1726,91 +1971,182 @@ static int bnx2x_ext_phy_is_link_up(struct bnx2x *bp) { u32 ext_phy_type; u32 ext_phy_addr; - u32 local_phy; - u32 val = 0; + u32 val1 = 0, val2; u32 rx_sd, pcs_status; if (bp->phy_flags & PHY_XGXS_FLAG) { - local_phy = bp->phy_addr; ext_phy_addr = ((bp->ext_phy_config & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); - bp->phy_addr = (u8)ext_phy_addr; ext_phy_type = XGXS_EXT_PHY_TYPE(bp); switch (ext_phy_type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: DP(NETIF_MSG_LINK, "XGXS Direct\n"); - val = 1; + val1 = 1; break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: DP(NETIF_MSG_LINK, "XGXS 8705\n"); - bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val); - DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val); - - bnx2x_mdio45_read(bp, EXT_PHY_OPT_WIS_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val); - DP(NETIF_MSG_LINK, "8705 LASI status is %d\n", val); - - bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_WIS_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); + + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_WIS_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8705 LASI status 0x%x\n", val1); + + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_PMD_RX_SD, &rx_sd); - val = (rx_sd & 0x1); + DP(NETIF_MSG_LINK, "8705 rx_sd 0x%x\n", rx_sd); + val1 = (rx_sd & 0x1); break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: DP(NETIF_MSG_LINK, "XGXS 8706\n"); - bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val); - DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val); - - bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_LASI_STATUS, &val); - DP(NETIF_MSG_LINK, "8706 LASI status is %d\n", val); - - bnx2x_mdio45_read(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1); + + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "8706 LASI status 0x%x\n", val1); + + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_PMD_RX_SD, &rx_sd); - bnx2x_mdio45_read(bp, EXT_PHY_OPT_PCS_DEVAD, - EXT_PHY_OPT_PCS_STATUS, &pcs_status); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PCS_DEVAD, + EXT_PHY_OPT_PCS_STATUS, &pcs_status); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_AN_LINK_STATUS, &val2); + DP(NETIF_MSG_LINK, "8706 rx_sd 0x%x" - " pcs_status 0x%x\n", rx_sd, pcs_status); - /* link is up if both bit 0 of pmd_rx and - * bit 0 of pcs_status are set + " pcs_status 0x%x 1Gbps link_status 0x%x 0x%x\n", + rx_sd, pcs_status, val2, (val2 & (1<<1))); + /* link is up if both bit 0 of pmd_rx_sd and + * bit 0 of pcs_status are set, or if the autoneg bit + 1 is set + */ + val1 = ((rx_sd & pcs_status & 0x1) || (val2 & (1<<1))); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO); + + /* clear the interrupt LASI status register */ + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PCS_DEVAD, + EXT_PHY_KR_LASI_STATUS, &val2); + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PCS_DEVAD, + EXT_PHY_KR_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, "KR LASI status 0x%x->0x%x\n", + val2, val1); + /* Check the LASI */ + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0x9003, &val2); + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0x9003, &val1); + DP(NETIF_MSG_LINK, "KR 0x9003 0x%x->0x%x\n", + val2, val1); + /* Check the link status */ + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PCS_DEVAD, + EXT_PHY_KR_PCS_STATUS, &val2); + DP(NETIF_MSG_LINK, "KR PCS status 0x%x\n", val2); + /* Check the link status on 1.1.2 */ + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_KR_STATUS, &val2); + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_KR_STATUS, &val1); + DP(NETIF_MSG_LINK, + "KR PMA status 0x%x->0x%x\n", val2, val1); + val1 = ((val1 & 4) == 4); + /* If 1G was requested assume the link is up */ + if (!(bp->req_autoneg & AUTONEG_SPEED) && + (bp->req_line_speed == SPEED_1000)) + val1 = 1; + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val2); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_STATUS, &val1); + DP(NETIF_MSG_LINK, + "10G-base-T LASI status 0x%x->0x%x\n", val2, val1); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_KR_STATUS, &val2); + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_KR_STATUS, &val1); + DP(NETIF_MSG_LINK, + "10G-base-T PMA status 0x%x->0x%x\n", val2, val1); + val1 = ((val1 & 4) == 4); + /* if link is up + * print the AN outcome of the SFX7101 PHY */ - val = (rx_sd & pcs_status); + if (val1) { + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + 0x21, &val2); + DP(NETIF_MSG_LINK, + "SFX7101 AN status 0x%x->%s\n", val2, + (val2 & (1<<14)) ? "Master" : "Slave"); + } break; default: DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", bp->ext_phy_config); - val = 0; + val1 = 0; break; } - bp->phy_addr = local_phy; } else { /* SerDes */ ext_phy_type = SERDES_EXT_PHY_TYPE(bp); switch (ext_phy_type) { case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT: DP(NETIF_MSG_LINK, "SerDes Direct\n"); - val = 1; + val1 = 1; break; case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482: DP(NETIF_MSG_LINK, "SerDes 5482\n"); - val = 1; + val1 = 1; break; default: DP(NETIF_MSG_LINK, "BAD SerDes ext_phy_config 0x%x\n", bp->ext_phy_config); - val = 0; + val1 = 0; break; } } - return val; + return val1; } static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb) @@ -1935,6 +2271,35 @@ static void bnx2x_bmac_enable(struct bnx2x *bp, int is_lb) bp->stats_state = STATS_STATE_ENABLE; } +static void bnx2x_bmac_rx_disable(struct bnx2x *bp) +{ + int port = bp->port; + u32 bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + u32 wb_write[2]; + + /* Only if the bmac is out of reset */ + if (REG_RD(bp, MISC_REG_RESET_REG_2) & + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)) { + /* Clear Rx Enable bit in BMAC_CONTROL register */ +#ifdef BNX2X_DMAE_RD + bnx2x_read_dmae(bp, bmac_addr + + BIGMAC_REGISTER_BMAC_CONTROL, 2); + wb_write[0] = *bnx2x_sp(bp, wb_data[0]); + wb_write[1] = *bnx2x_sp(bp, wb_data[1]); +#else + wb_write[0] = REG_RD(bp, + bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL); + wb_write[1] = REG_RD(bp, + bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL + 4); +#endif + wb_write[0] &= ~BMAC_CONTROL_RX_ENABLE; + REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL, + wb_write, 2); + msleep(1); + } +} + static void bnx2x_emac_enable(struct bnx2x *bp) { int port = bp->port; @@ -2233,7 +2598,7 @@ static void bnx2x_pbf_update(struct bnx2x *bp) static void bnx2x_update_mng(struct bnx2x *bp) { if (!nomcp) - SHMEM_WR(bp, drv_fw_mb[bp->port].link_status, + SHMEM_WR(bp, port_mb[bp->port].link_status, bp->link_status); } @@ -2295,19 +2660,19 @@ static void bnx2x_link_down(struct bnx2x *bp) DP(BNX2X_MSG_STATS, "stats_state - STOP\n"); } - /* indicate link down */ + /* indicate no mac active */ bp->phy_flags &= ~(PHY_BMAC_FLAG | PHY_EMAC_FLAG); - /* reset BigMac */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + /* update shared memory */ + bnx2x_update_mng(bp); - /* ignore drain flag interrupt */ /* activate nig drain */ NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); - /* update shared memory */ - bnx2x_update_mng(bp); + /* reset BigMac */ + bnx2x_bmac_rx_disable(bp); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); /* indicate link down */ bnx2x_link_report(bp); @@ -2318,14 +2683,15 @@ static void bnx2x_init_mac_stats(struct bnx2x *bp); /* This function is called upon link interrupt */ static void bnx2x_link_update(struct bnx2x *bp) { - u32 gp_status; int port = bp->port; int i; + u32 gp_status; int link_10g; - DP(NETIF_MSG_LINK, "port %x, is xgxs %x, stat_mask 0x%x," + DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x," " int_mask 0x%x, saved_mask 0x%x, MI_INT %x, SERDES_LINK %x," - " 10G %x, XGXS_LINK %x\n", port, (bp->phy_flags & PHY_XGXS_FLAG), + " 10G %x, XGXS_LINK %x\n", port, + (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes", REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4), REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), bp->nig_mask, REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), @@ -2337,7 +2703,7 @@ static void bnx2x_link_update(struct bnx2x *bp) might_sleep(); MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_GP_STATUS); /* avoid fast toggling */ - for (i = 0 ; i < 10 ; i++) { + for (i = 0; i < 10; i++) { msleep(10); bnx2x_mdio22_read(bp, MDIO_GP_STATUS_TOP_AN_STATUS1, &gp_status); @@ -2352,7 +2718,8 @@ static void bnx2x_link_update(struct bnx2x *bp) bnx2x_link_int_ack(bp, link_10g); /* link is up only if both local phy and external phy are up */ - if (bp->link_up && bnx2x_ext_phy_is_link_up(bp)) { + bp->link_up = (bp->phy_link_up && bnx2x_ext_phy_is_link_up(bp)); + if (bp->link_up) { if (link_10g) { bnx2x_bmac_enable(bp, 0); bnx2x_leds_set(bp, SPEED_10000); @@ -2428,7 +2795,9 @@ static void bnx2x_reset_unicore(struct bnx2x *bp) } } - BNX2X_ERR("BUG! unicore is still in reset!\n"); + BNX2X_ERR("BUG! %s (0x%x) is still in reset!\n", + (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes", + bp->phy_addr); } static void bnx2x_set_swap_lanes(struct bnx2x *bp) @@ -2476,12 +2845,12 @@ static void bnx2x_set_parallel_detection(struct bnx2x *bp) MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_10G_PARALLEL_DETECT); bnx2x_mdio22_write(bp, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK, + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK, MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT); bnx2x_mdio22_read(bp, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, - &control2); + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, + &control2); if (bp->autoneg & AUTONEG_PARALLEL) { control2 |= @@ -2491,8 +2860,14 @@ static void bnx2x_set_parallel_detection(struct bnx2x *bp) ~MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN; } bnx2x_mdio22_write(bp, - MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, - control2); + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, + control2); + + /* Disable parallel detection of HiG */ + MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_XGXS_BLOCK2); + bnx2x_mdio22_write(bp, MDIO_XGXS_BLOCK2_UNICORE_MODE_10G, + MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS | + MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS); } } @@ -2626,7 +3001,7 @@ static void bnx2x_set_brcm_cl37_advertisment(struct bnx2x *bp) MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_OVER_1G); /* set extended capabilities */ - if (bp->advertising & ADVERTISED_2500baseT_Full) + if (bp->advertising & ADVERTISED_2500baseX_Full) val |= MDIO_OVER_1G_UP1_2_5G; if (bp->advertising & ADVERTISED_10000baseT_Full) val |= MDIO_OVER_1G_UP1_10G; @@ -2639,23 +3014,94 @@ static void bnx2x_set_ieee_aneg_advertisment(struct bnx2x *bp) { u32 an_adv; - /* for AN, we are always publishing full duplex */ - an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX; + /* for AN, we are always publishing full duplex */ + an_adv = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX; + + /* resolve pause mode and advertisement + * Please refer to Table 28B-3 of the 802.3ab-1999 spec */ + if (bp->req_autoneg & AUTONEG_FLOW_CTRL) { + switch (bp->req_flow_ctrl) { + case FLOW_CTRL_AUTO: + if (bp->dev->mtu <= 4500) { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + bp->advertising |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + } else { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + bp->advertising |= ADVERTISED_Asym_Pause; + } + break; + + case FLOW_CTRL_TX: + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + bp->advertising |= ADVERTISED_Asym_Pause; + break; + + case FLOW_CTRL_RX: + if (bp->dev->mtu <= 4500) { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + bp->advertising |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + } else { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; + bp->advertising &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + } + break; + + case FLOW_CTRL_BOTH: + if (bp->dev->mtu <= 4500) { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + bp->advertising |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + } else { + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + bp->advertising |= ADVERTISED_Asym_Pause; + } + break; + + case FLOW_CTRL_NONE: + default: + an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; + bp->advertising &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + break; + } + } else { /* forced mode */ + switch (bp->req_flow_ctrl) { + case FLOW_CTRL_AUTO: + DP(NETIF_MSG_LINK, "req_flow_ctrl 0x%x while" + " req_autoneg 0x%x\n", + bp->req_flow_ctrl, bp->req_autoneg); + break; + + case FLOW_CTRL_TX: + an_adv |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + bp->advertising |= ADVERTISED_Asym_Pause; + break; + + case FLOW_CTRL_RX: + case FLOW_CTRL_BOTH: + an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + bp->advertising |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + break; - /* set pause */ - switch (bp->pause_mode) { - case PAUSE_SYMMETRIC: - an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC; - break; - case PAUSE_ASYMMETRIC: - an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; - break; - case PAUSE_BOTH: - an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; - break; - case PAUSE_NONE: - an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; - break; + case FLOW_CTRL_NONE: + default: + an_adv |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; + bp->advertising &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + break; + } } MDIO_SET_REG_BANK(bp, MDIO_REG_BANK_COMBO_IEEE0); @@ -2753,47 +3199,162 @@ static void bnx2x_initialize_sgmii_process(struct bnx2x *bp) static void bnx2x_link_int_enable(struct bnx2x *bp) { int port = bp->port; + u32 ext_phy_type; + u32 mask; /* setting the status to report on link up for either XGXS or SerDes */ bnx2x_bits_dis(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4, - (NIG_XGXS0_LINK_STATUS | - NIG_STATUS_INTERRUPT_XGXS0_LINK10G | - NIG_SERDES0_LINK_STATUS)); + (NIG_STATUS_XGXS0_LINK10G | + NIG_STATUS_XGXS0_LINK_STATUS | + NIG_STATUS_SERDES0_LINK_STATUS)); if (bp->phy_flags & PHY_XGXS_FLAG) { - /* TBD - - * in force mode (not AN) we can enable just the relevant - * interrupt - * Even in AN we might enable only one according to the AN - * speed mask - */ - bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - (NIG_MASK_XGXS0_LINK_STATUS | - NIG_MASK_XGXS0_LINK10G)); - DP(NETIF_MSG_LINK, "enable XGXS interrupt\n"); + mask = (NIG_MASK_XGXS0_LINK10G | + NIG_MASK_XGXS0_LINK_STATUS); + DP(NETIF_MSG_LINK, "enabled XGXS interrupt\n"); + ext_phy_type = XGXS_EXT_PHY_TYPE(bp); + if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && + (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) && + (ext_phy_type != + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) { + mask |= NIG_MASK_MI_INT; + DP(NETIF_MSG_LINK, "enabled external phy int\n"); + } } else { /* SerDes */ - bnx2x_bits_en(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - NIG_MASK_SERDES0_LINK_STATUS); - DP(NETIF_MSG_LINK, "enable SerDes interrupt\n"); + mask = NIG_MASK_SERDES0_LINK_STATUS; + DP(NETIF_MSG_LINK, "enabled SerDes interrupt\n"); + ext_phy_type = SERDES_EXT_PHY_TYPE(bp); + if ((ext_phy_type != + PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) && + (ext_phy_type != + PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN)) { + mask |= NIG_MASK_MI_INT; + DP(NETIF_MSG_LINK, "enabled external phy int\n"); + } } + bnx2x_bits_en(bp, + NIG_REG_MASK_INTERRUPT_PORT0 + port*4, + mask); + DP(NETIF_MSG_LINK, "port %x, %s, int_status 0x%x," + " int_mask 0x%x, MI_INT %x, SERDES_LINK %x," + " 10G %x, XGXS_LINK %x\n", port, + (bp->phy_flags & PHY_XGXS_FLAG)? "XGXS":"SerDes", + REG_RD(bp, NIG_REG_STATUS_INTERRUPT_PORT0 + port*4), + REG_RD(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4), + REG_RD(bp, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port*0x18), + REG_RD(bp, NIG_REG_SERDES0_STATUS_LINK_STATUS + port*0x3c), + REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), + REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68) + ); +} + +static void bnx2x_bcm8072_external_rom_boot(struct bnx2x *bp) +{ + u32 ext_phy_addr = ((bp->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + u32 fw_ver1, fw_ver2; + + /* Need to wait 200ms after reset */ + msleep(200); + /* Boot port from external ROM + * Set ser_boot_ctl bit in the MISC_CTRL1 register + */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + EXT_PHY_KR_MISC_CTRL1, 0x0001); + + /* Reset internal microprocessor */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL, + EXT_PHY_KR_ROM_RESET_INTERNAL_MP); + /* set micro reset = 0 */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL, + EXT_PHY_KR_ROM_MICRO_RESET); + /* Reset internal microprocessor */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_GEN_CTRL, + EXT_PHY_KR_ROM_RESET_INTERNAL_MP); + /* wait for 100ms for code download via SPI port */ + msleep(100); + + /* Clear ser_boot_ctl bit */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + EXT_PHY_KR_MISC_CTRL1, 0x0000); + /* Wait 100ms */ + msleep(100); + + /* Print the PHY FW version */ + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0xca19, &fw_ver1); + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0xca1a, &fw_ver2); + DP(NETIF_MSG_LINK, + "8072 FW version 0x%x:0x%x\n", fw_ver1, fw_ver2); +} + +static void bnx2x_bcm8072_force_10G(struct bnx2x *bp) +{ + u32 ext_phy_addr = ((bp->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + + /* Force KR or KX */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL, + 0x2040); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_CTRL2, + 0x000b); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, EXT_PHY_KR_PMD_CTRL, + 0x0000); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, EXT_PHY_KR_CTRL, + 0x0000); } static void bnx2x_ext_phy_init(struct bnx2x *bp) { - int port = bp->port; u32 ext_phy_type; u32 ext_phy_addr; - u32 local_phy; + u32 cnt; + u32 ctrl; + u32 val = 0; if (bp->phy_flags & PHY_XGXS_FLAG) { - local_phy = bp->phy_addr; ext_phy_addr = ((bp->ext_phy_config & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); ext_phy_type = XGXS_EXT_PHY_TYPE(bp); + /* Make sure that the soft reset is off (expect for the 8072: + * due to the lock, it will be done inside the specific + * handling) + */ + if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && + (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) && + (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) && + (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072)) { + /* Wait for soft reset to get cleared upto 1 sec */ + for (cnt = 0; cnt < 1000; cnt++) { + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_CNTL, &ctrl); + if (!(ctrl & (1<<15))) + break; + msleep(1); + } + DP(NETIF_MSG_LINK, + "control reg 0x%x (after %d ms)\n", ctrl, cnt); + } + switch (ext_phy_type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: DP(NETIF_MSG_LINK, "XGXS Direct\n"); @@ -2801,49 +3362,235 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp) case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: DP(NETIF_MSG_LINK, "XGXS 8705\n"); - bnx2x_bits_en(bp, - NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - NIG_MASK_MI_INT); - DP(NETIF_MSG_LINK, "enabled external phy int\n"); - bp->phy_addr = ext_phy_type; - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_PMD_MISC_CNTL, 0x8288); - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_PHY_IDENTIFIER, 0x7fbf); - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_CMU_PLL_BYPASS, 0x0100); - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_WIS_DEVAD, + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_WIS_DEVAD, EXT_PHY_OPT_LASI_CNTL, 0x1); break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: DP(NETIF_MSG_LINK, "XGXS 8706\n"); - bnx2x_bits_en(bp, - NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - NIG_MASK_MI_INT); - DP(NETIF_MSG_LINK, "enabled external phy int\n"); - bp->phy_addr = ext_phy_type; - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, - EXT_PHY_OPT_PMD_DIGITAL_CNT, - 0x400); - bnx2x_mdio45_vwrite(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + if (!(bp->req_autoneg & AUTONEG_SPEED)) { + /* Force speed */ + if (bp->req_line_speed == SPEED_10000) { + DP(NETIF_MSG_LINK, + "XGXS 8706 force 10Gbps\n"); + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_PMD_DIGITAL_CNT, + 0x400); + } else { + /* Force 1Gbps */ + DP(NETIF_MSG_LINK, + "XGXS 8706 force 1Gbps\n"); + + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_CNTL, + 0x0040); + + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_CNTL2, + 0x000D); + } + + /* Enable LASI */ + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_CNTL, + 0x1); + } else { + /* AUTONEG */ + /* Allow CL37 through CL73 */ + DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n"); + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_AN_CL37_CL73, + 0x040c); + + /* Enable Full-Duplex advertisment on CL37 */ + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_AN_CL37_FD, + 0x0020); + /* Enable CL37 AN */ + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_AN_CL37_AN, + 0x1000); + /* Advertise 10G/1G support */ + if (bp->advertising & + ADVERTISED_1000baseT_Full) + val = (1<<5); + if (bp->advertising & + ADVERTISED_10000baseT_Full) + val |= (1<<7); + + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_AN_ADV, val); + /* Enable LASI */ + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_LASI_CNTL, + 0x1); + + /* Enable clause 73 AN */ + bnx2x_mdio45_write(bp, ext_phy_addr, + EXT_PHY_AUTO_NEG_DEVAD, + EXT_PHY_OPT_CNTL, + 0x1200); + } + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO); + /* Wait for soft reset to get cleared upto 1 sec */ + for (cnt = 0; cnt < 1000; cnt++) { + bnx2x_mdio45_ctrl_read(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + EXT_PHY_OPT_CNTL, &ctrl); + if (!(ctrl & (1<<15))) + break; + msleep(1); + } + DP(NETIF_MSG_LINK, + "8072 control reg 0x%x (after %d ms)\n", + ctrl, cnt); + + bnx2x_bcm8072_external_rom_boot(bp); + DP(NETIF_MSG_LINK, "Finshed loading 8072 KR ROM\n"); + + /* enable LASI */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0x9000, 0x0400); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + EXT_PHY_KR_LASI_CNTL, 0x0004); + + /* If this is forced speed, set to KR or KX + * (all other are not supported) + */ + if (!(bp->req_autoneg & AUTONEG_SPEED)) { + if (bp->req_line_speed == SPEED_10000) { + bnx2x_bcm8072_force_10G(bp); + DP(NETIF_MSG_LINK, + "Forced speed 10G on 8072\n"); + /* unlock */ + bnx2x_hw_unlock(bp, + HW_LOCK_RESOURCE_8072_MDIO); + break; + } else + val = (1<<5); + } else { + + /* Advertise 10G/1G support */ + if (bp->advertising & + ADVERTISED_1000baseT_Full) + val = (1<<5); + if (bp->advertising & + ADVERTISED_10000baseT_Full) + val |= (1<<7); + } + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + 0x11, val); + /* Add support for CL37 ( passive mode ) I */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + 0x8370, 0x040c); + /* Add support for CL37 ( passive mode ) II */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + 0xffe4, 0x20); + /* Add support for CL37 ( passive mode ) III */ + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + 0xffe0, 0x1000); + /* Restart autoneg */ + msleep(500); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_CTRL, 0x1200); + DP(NETIF_MSG_LINK, "8072 Autoneg Restart: " + "1G %ssupported 10G %ssupported\n", + (val & (1<<5)) ? "" : "not ", + (val & (1<<7)) ? "" : "not "); + + /* unlock */ + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + DP(NETIF_MSG_LINK, + "Setting the SFX7101 LASI indication\n"); + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_LASI_CNTL, 0x1); + DP(NETIF_MSG_LINK, + "Setting the SFX7101 LED to blink on traffic\n"); + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, + 0xC007, (1<<3)); + + /* read modify write pause advertizing */ + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_AUTO_NEG_ADVERT, &val); + val &= ~EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH; + /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ + if (bp->advertising & ADVERTISED_Pause) + val |= EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE; + + if (bp->advertising & ADVERTISED_Asym_Pause) { + val |= + EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC; + } + DP(NETIF_MSG_LINK, "SFX7101 AN advertize 0x%x\n", val); + bnx2x_mdio45_vwrite(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_AUTO_NEG_ADVERT, val); + /* Restart autoneg */ + bnx2x_mdio45_read(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_CTRL, &val); + val |= 0x200; + bnx2x_mdio45_write(bp, ext_phy_addr, + EXT_PHY_KR_AUTO_NEG_DEVAD, + EXT_PHY_KR_CTRL, val); break; default: - DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", - bp->ext_phy_config); + BNX2X_ERR("BAD XGXS ext_phy_config 0x%x\n", + bp->ext_phy_config); break; } - bp->phy_addr = local_phy; } else { /* SerDes */ -/* ext_phy_addr = ((bp->ext_phy_config & +/* ext_phy_addr = ((bp->ext_phy_config & PORT_HW_CFG_SERDES_EXT_PHY_ADDR_MASK) >> PORT_HW_CFG_SERDES_EXT_PHY_ADDR_SHIFT); */ @@ -2855,10 +3602,6 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp) case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482: DP(NETIF_MSG_LINK, "SerDes 5482\n"); - bnx2x_bits_en(bp, - NIG_REG_MASK_INTERRUPT_PORT0 + port*4, - NIG_MASK_MI_INT); - DP(NETIF_MSG_LINK, "enabled external phy int\n"); break; default: @@ -2872,8 +3615,22 @@ static void bnx2x_ext_phy_init(struct bnx2x *bp) static void bnx2x_ext_phy_reset(struct bnx2x *bp) { u32 ext_phy_type; - u32 ext_phy_addr; - u32 local_phy; + u32 ext_phy_addr = ((bp->ext_phy_config & + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); + u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK); + + /* The PHY reset is controled by GPIO 1 + * Give it 1ms of reset pulse + */ + if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) && + (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) { + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW); + msleep(1); + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_HIGH); + } if (bp->phy_flags & PHY_XGXS_FLAG) { ext_phy_type = XGXS_EXT_PHY_TYPE(bp); @@ -2884,15 +3641,24 @@ static void bnx2x_ext_phy_reset(struct bnx2x *bp) case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - DP(NETIF_MSG_LINK, "XGXS 8705/6\n"); - local_phy = bp->phy_addr; - ext_phy_addr = ((bp->ext_phy_config & - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> - PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT); - bp->phy_addr = (u8)ext_phy_addr; - bnx2x_mdio45_write(bp, EXT_PHY_OPT_PMA_PMD_DEVAD, + DP(NETIF_MSG_LINK, "XGXS 8705/8706\n"); + bnx2x_mdio45_write(bp, ext_phy_addr, + EXT_PHY_OPT_PMA_PMD_DEVAD, EXT_PHY_OPT_CNTL, 0xa040); - bp->phy_addr = local_phy; + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + DP(NETIF_MSG_LINK, "XGXS 8072\n"); + bnx2x_hw_lock(bp, HW_LOCK_RESOURCE_8072_MDIO); + bnx2x_mdio45_ctrl_write(bp, GRCBASE_EMAC0, + ext_phy_addr, + EXT_PHY_KR_PMA_PMD_DEVAD, + 0, 1<<15); + bnx2x_hw_unlock(bp, HW_LOCK_RESOURCE_8072_MDIO); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + DP(NETIF_MSG_LINK, "XGXS SFX7101\n"); break; default: @@ -2931,6 +3697,7 @@ static void bnx2x_link_initialize(struct bnx2x *bp) NIG_MASK_SERDES0_LINK_STATUS | NIG_MASK_MI_INT)); + /* Activate the external PHY */ bnx2x_ext_phy_reset(bp); bnx2x_set_aer_mmd(bp); @@ -3011,11 +3778,11 @@ static void bnx2x_link_initialize(struct bnx2x *bp) bnx2x_initialize_sgmii_process(bp); } - /* enable the interrupt */ - bnx2x_link_int_enable(bp); - /* init ext phy and enable link state int */ bnx2x_ext_phy_init(bp); + + /* enable the interrupt */ + bnx2x_link_int_enable(bp); } static void bnx2x_phy_deassert(struct bnx2x *bp) @@ -3074,6 +3841,11 @@ static int bnx2x_phy_init(struct bnx2x *bp) static void bnx2x_link_reset(struct bnx2x *bp) { int port = bp->port; + u32 board = (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK); + + /* update shared memory */ + bp->link_status = 0; + bnx2x_update_mng(bp); /* disable attentions */ bnx2x_bits_dis(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, @@ -3082,21 +3854,45 @@ static void bnx2x_link_reset(struct bnx2x *bp) NIG_MASK_SERDES0_LINK_STATUS | NIG_MASK_MI_INT)); - bnx2x_ext_phy_reset(bp); + /* activate nig drain */ + NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); + + /* disable nig egress interface */ + NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0); + NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); + + /* Stop BigMac rx */ + bnx2x_bmac_rx_disable(bp); + + /* disable emac */ + NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0); + + msleep(10); + + /* The PHY reset is controled by GPIO 1 + * Hold it as output low + */ + if ((board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1002G) && + (board != SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G)) { + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW); + DP(NETIF_MSG_LINK, "reset external PHY\n"); + } /* reset the SerDes/XGXS */ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, (0x1ff << (port*16))); - /* reset EMAC / BMAC and disable NIG interfaces */ - NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0); - NIG_WR(NIG_REG_BMAC0_OUT_EN + port*4, 0); + /* reset BigMac */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); - NIG_WR(NIG_REG_NIG_EMAC0_EN + port*4, 0); + /* disable nig ingress interface */ + NIG_WR(NIG_REG_BMAC0_IN_EN + port*4, 0); NIG_WR(NIG_REG_EMAC0_IN_EN + port*4, 0); - NIG_WR(NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0); - NIG_WR(NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); + /* set link down */ + bp->link_up = 0; } #ifdef BNX2X_XGXS_LB @@ -3177,6 +3973,7 @@ static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid, bnx2x_panic(); return -EBUSY; } + /* CID needs port number to be encoded int it */ bp->spq_prod_bd->hdr.conn_and_cmd_data = cpu_to_le32(((command << SPE_HDR_CMD_ID_SHIFT) | @@ -4335,7 +5132,7 @@ static void bnx2x_timer(unsigned long data) return; if (atomic_read(&bp->intr_sem) != 0) - goto bnx2x_restart_timer; + goto timer_restart; if (poll) { struct bnx2x_fastpath *fp = &bp->fp[0]; @@ -4345,7 +5142,7 @@ static void bnx2x_timer(unsigned long data) rc = bnx2x_rx_int(fp, 1000); } - if (!nomcp && (bp->bc_ver >= 0x040003)) { + if (!nomcp) { int port = bp->port; u32 drv_pulse; u32 mcp_pulse; @@ -4354,9 +5151,9 @@ static void bnx2x_timer(unsigned long data) bp->fw_drv_pulse_wr_seq &= DRV_PULSE_SEQ_MASK; /* TBD - add SYSTEM_TIME */ drv_pulse = bp->fw_drv_pulse_wr_seq; - SHMEM_WR(bp, drv_fw_mb[port].drv_pulse_mb, drv_pulse); + SHMEM_WR(bp, func_mb[port].drv_pulse_mb, drv_pulse); - mcp_pulse = (SHMEM_RD(bp, drv_fw_mb[port].mcp_pulse_mb) & + mcp_pulse = (SHMEM_RD(bp, func_mb[port].mcp_pulse_mb) & MCP_PULSE_SEQ_MASK); /* The delta between driver pulse and mcp response * should be 1 (before mcp response) or 0 (after mcp response) @@ -4370,11 +5167,11 @@ static void bnx2x_timer(unsigned long data) } if (bp->stats_state == STATS_STATE_DISABLE) - goto bnx2x_restart_timer; + goto timer_restart; bnx2x_update_stats(bp); -bnx2x_restart_timer: +timer_restart: mod_timer(&bp->timer, jiffies + bp->current_interval); } @@ -5266,8 +6063,10 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) if (mode & 0x1) { /* init common */ DP(BNX2X_MSG_MCP, "starting common init func %d mode %x\n", func, mode); - REG_WR(bp, MISC_REG_RESET_REG_1, 0xffffffff); - REG_WR(bp, MISC_REG_RESET_REG_2, 0xfffc); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, + 0xffffffff); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, + 0xfffc); bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END); REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x100); @@ -5487,6 +6286,28 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) enable_blocks_attention(bp); /* enable_blocks_parity(bp); */ + switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) { + case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G: + /* Fan failure is indicated by SPIO 5 */ + bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5, + MISC_REGISTERS_SPIO_INPUT_HI_Z); + + /* set to active low mode */ + val = REG_RD(bp, MISC_REG_SPIO_INT); + val |= ((1 << MISC_REGISTERS_SPIO_5) << + MISC_REGISTERS_SPIO_INT_OLD_SET_POS); + REG_WR(bp, MISC_REG_SPIO_INT, val); + + /* enable interrupt to signal the IGU */ + val = REG_RD(bp, MISC_REG_SPIO_EVENT_EN); + val |= (1 << MISC_REGISTERS_SPIO_5); + REG_WR(bp, MISC_REG_SPIO_EVENT_EN, val); + break; + + default: + break; + } + } /* end of common init */ /* per port init */ @@ -5646,6 +6467,18 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) /* Port MCP comes here */ /* Port DMAE comes here */ + switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) { + case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G: + /* add SPIO 5 to group 0 */ + val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + val |= AEU_INPUTS_ATTN_BITS_SPIO5; + REG_WR(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0, val); + break; + + default: + break; + } + bnx2x_link_reset(bp); /* Reset PCIE errors for debug */ @@ -5670,9 +6503,9 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) port = bp->port; bp->fw_drv_pulse_wr_seq = - (SHMEM_RD(bp, drv_fw_mb[port].drv_pulse_mb) & + (SHMEM_RD(bp, func_mb[port].drv_pulse_mb) & DRV_PULSE_SEQ_MASK); - bp->fw_mb = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_param); + bp->fw_mb = SHMEM_RD(bp, func_mb[port].fw_mb_param); DP(BNX2X_MSG_MCP, "drv_pulse 0x%x fw_mb 0x%x\n", bp->fw_drv_pulse_wr_seq, bp->fw_mb); } else { @@ -5685,12 +6518,12 @@ static int bnx2x_function_init(struct bnx2x *bp, int mode) /* send the MCP a request, block until there is a reply */ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command) { - u32 rc = 0; - u32 seq = ++bp->fw_seq; int port = bp->port; + u32 seq = ++bp->fw_seq; + u32 rc = 0; - SHMEM_WR(bp, drv_fw_mb[port].drv_mb_header, command|seq); - DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", command|seq); + SHMEM_WR(bp, func_mb[port].drv_mb_header, (command | seq)); + DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq)); /* let the FW do it's magic ... */ msleep(100); /* TBD */ @@ -5698,19 +6531,20 @@ static u32 bnx2x_fw_command(struct bnx2x *bp, u32 command) if (CHIP_REV_IS_SLOW(bp)) msleep(900); - rc = SHMEM_RD(bp, drv_fw_mb[port].fw_mb_header); - + rc = SHMEM_RD(bp, func_mb[port].fw_mb_header); DP(BNX2X_MSG_MCP, "read (%x) seq is (%x) from FW MB\n", rc, seq); /* is this a reply to our command? */ if (seq == (rc & FW_MSG_SEQ_NUMBER_MASK)) { rc &= FW_MSG_CODE_MASK; + } else { /* FW BUG! */ BNX2X_ERR("FW failed to respond!\n"); bnx2x_fw_dump(bp); rc = 0; } + return rc; } @@ -6559,7 +7393,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | - SUPPORTED_2500baseT_Full | + SUPPORTED_2500baseX_Full | SUPPORTED_TP | SUPPORTED_FIBRE | SUPPORTED_Autoneg | SUPPORTED_Pause | @@ -6572,10 +7406,10 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) bp->phy_flags |= PHY_SGMII_FLAG; - bp->supported |= (/* SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full |*/ + bp->supported |= (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | SUPPORTED_TP | SUPPORTED_FIBRE | SUPPORTED_Autoneg | @@ -6611,7 +7445,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | - SUPPORTED_2500baseT_Full | + SUPPORTED_2500baseX_Full | SUPPORTED_10000baseT_Full | SUPPORTED_TP | SUPPORTED_FIBRE | SUPPORTED_Autoneg | @@ -6620,12 +7454,46 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: + BNX2X_DEV_INFO("ext_phy_type 0x%x (8705)\n", + ext_phy_type); + + bp->supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: - BNX2X_DEV_INFO("ext_phy_type 0x%x (8705/6)\n", + BNX2X_DEV_INFO("ext_phy_type 0x%x (8706)\n", + ext_phy_type); + + bp->supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_FIBRE | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + BNX2X_DEV_INFO("ext_phy_type 0x%x (8072)\n", ext_phy_type); bp->supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n", + ext_phy_type); + + bp->supported |= (SUPPORTED_10000baseT_Full | + SUPPORTED_TP | + SUPPORTED_Autoneg | SUPPORTED_Pause | SUPPORTED_Asym_Pause); break; @@ -6682,7 +7550,7 @@ static void bnx2x_link_settings_supported(struct bnx2x *bp, u32 switch_cfg) SUPPORTED_1000baseT_Full); if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) - bp->supported &= ~SUPPORTED_2500baseT_Full; + bp->supported &= ~SUPPORTED_2500baseX_Full; if (!(bp->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) bp->supported &= ~SUPPORTED_10000baseT_Full; @@ -6702,13 +7570,8 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) bp->req_line_speed = 0; bp->advertising = bp->supported; } else { - u32 ext_phy_type; - - ext_phy_type = XGXS_EXT_PHY_TYPE(bp); - if ((ext_phy_type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) || - (ext_phy_type == - PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706)) { + if (XGXS_EXT_PHY_TYPE(bp) == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) { /* force 10G, no AN */ bp->req_line_speed = SPEED_10000; bp->advertising = @@ -6725,8 +7588,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_10M_FULL: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) { + if (bp->supported & SUPPORTED_10baseT_Full) { bp->req_line_speed = SPEED_10; bp->advertising = (ADVERTISED_10baseT_Full | ADVERTISED_TP); @@ -6740,8 +7602,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_10M_HALF: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) { + if (bp->supported & SUPPORTED_10baseT_Half) { bp->req_line_speed = SPEED_10; bp->req_duplex = DUPLEX_HALF; bp->advertising = (ADVERTISED_10baseT_Half | @@ -6756,8 +7617,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_100M_FULL: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) { + if (bp->supported & SUPPORTED_100baseT_Full) { bp->req_line_speed = SPEED_100; bp->advertising = (ADVERTISED_100baseT_Full | ADVERTISED_TP); @@ -6771,8 +7631,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_100M_HALF: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) { + if (bp->supported & SUPPORTED_100baseT_Half) { bp->req_line_speed = SPEED_100; bp->req_duplex = DUPLEX_HALF; bp->advertising = (ADVERTISED_100baseT_Half | @@ -6787,8 +7646,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_1G: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) { + if (bp->supported & SUPPORTED_1000baseT_Full) { bp->req_line_speed = SPEED_1000; bp->advertising = (ADVERTISED_1000baseT_Full | ADVERTISED_TP); @@ -6802,10 +7660,9 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) break; case PORT_FEATURE_LINK_SPEED_2_5G: - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) { + if (bp->supported & SUPPORTED_2500baseX_Full) { bp->req_line_speed = SPEED_2500; - bp->advertising = (ADVERTISED_2500baseT_Full | + bp->advertising = (ADVERTISED_2500baseX_Full | ADVERTISED_TP); } else { BNX2X_ERR("NVRAM config error. " @@ -6819,15 +7676,7 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) case PORT_FEATURE_LINK_SPEED_10G_CX4: case PORT_FEATURE_LINK_SPEED_10G_KX4: case PORT_FEATURE_LINK_SPEED_10G_KR: - if (!(bp->phy_flags & PHY_XGXS_FLAG)) { - BNX2X_ERR("NVRAM config error. " - "Invalid link_config 0x%x" - " phy_flags 0x%x\n", - bp->link_config, bp->phy_flags); - return; - } - if (bp->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) { + if (bp->supported & SUPPORTED_10000baseT_Full) { bp->req_line_speed = SPEED_10000; bp->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE); @@ -6854,43 +7703,13 @@ static void bnx2x_link_settings_requested(struct bnx2x *bp) bp->req_flow_ctrl = (bp->link_config & PORT_FEATURE_FLOW_CONTROL_MASK); - /* Please refer to Table 28B-3 of the 802.3ab-1999 spec */ - switch (bp->req_flow_ctrl) { - case FLOW_CTRL_AUTO: + if ((bp->req_flow_ctrl == FLOW_CTRL_AUTO) && + (bp->supported & SUPPORTED_Autoneg)) bp->req_autoneg |= AUTONEG_FLOW_CTRL; - if (bp->dev->mtu <= 4500) { - bp->pause_mode = PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - } else { - bp->pause_mode = PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; - } - break; - - case FLOW_CTRL_TX: - bp->pause_mode = PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; - break; - - case FLOW_CTRL_RX: - case FLOW_CTRL_BOTH: - bp->pause_mode = PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - break; - case FLOW_CTRL_NONE: - default: - bp->pause_mode = PAUSE_NONE; - bp->advertising &= ~(ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - break; - } - BNX2X_DEV_INFO("req_autoneg 0x%x req_flow_ctrl 0x%x\n" - KERN_INFO " pause_mode %d advertising 0x%x\n", - bp->req_autoneg, bp->req_flow_ctrl, - bp->pause_mode, bp->advertising); + BNX2X_DEV_INFO("req_autoneg 0x%x req_flow_ctrl 0x%x" + " advertising 0x%x\n", + bp->req_autoneg, bp->req_flow_ctrl, bp->advertising); } static void bnx2x_get_hwinfo(struct bnx2x *bp) @@ -6923,16 +7742,16 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp) val = SHMEM_RD(bp, validity_map[port]); if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) - != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) - BNX2X_ERR("MCP validity signature bad\n"); + != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) + BNX2X_ERR("BAD MCP validity signature\n"); - bp->fw_seq = (SHMEM_RD(bp, drv_fw_mb[port].drv_mb_header) & + bp->fw_seq = (SHMEM_RD(bp, func_mb[port].drv_mb_header) & DRV_MSG_SEQ_NUMBER_MASK); bp->hw_config = SHMEM_RD(bp, dev_info.shared_hw_config.config); - + bp->board = SHMEM_RD(bp, dev_info.shared_hw_config.board); bp->serdes_config = - SHMEM_RD(bp, dev_info.port_hw_config[bp->port].serdes_config); + SHMEM_RD(bp, dev_info.port_hw_config[port].serdes_config); bp->lane_config = SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config); bp->ext_phy_config = @@ -6945,13 +7764,13 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp) bp->link_config = SHMEM_RD(bp, dev_info.port_feature_config[port].link_config); - BNX2X_DEV_INFO("hw_config (%08x) serdes_config (%08x)\n" + BNX2X_DEV_INFO("hw_config (%08x) board (%08x) serdes_config (%08x)\n" KERN_INFO " lane_config (%08x) ext_phy_config (%08x)\n" KERN_INFO " speed_cap_mask (%08x) link_config (%08x)" " fw_seq (%08x)\n", - bp->hw_config, bp->serdes_config, bp->lane_config, - bp->ext_phy_config, bp->speed_cap_mask, - bp->link_config, bp->fw_seq); + bp->hw_config, bp->board, bp->serdes_config, + bp->lane_config, bp->ext_phy_config, + bp->speed_cap_mask, bp->link_config, bp->fw_seq); switch_cfg = (bp->link_config & PORT_FEATURE_CONNECTED_SWITCH_MASK); bnx2x_link_settings_supported(bp, switch_cfg); @@ -7005,14 +7824,8 @@ static void bnx2x_get_hwinfo(struct bnx2x *bp) return; set_mac: /* only supposed to happen on emulation/FPGA */ - BNX2X_ERR("warning constant MAC workaround active\n"); - bp->dev->dev_addr[0] = 0; - bp->dev->dev_addr[1] = 0x50; - bp->dev->dev_addr[2] = 0xc2; - bp->dev->dev_addr[3] = 0x2c; - bp->dev->dev_addr[4] = 0x71; - bp->dev->dev_addr[5] = port ? 0x0d : 0x0e; - + BNX2X_ERR("warning rendom MAC workaround active\n"); + random_ether_addr(bp->dev->dev_addr); memcpy(bp->dev->perm_addr, bp->dev->dev_addr, 6); } @@ -7039,19 +7852,34 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) } if (bp->phy_flags & PHY_XGXS_FLAG) { - cmd->port = PORT_FIBRE; - } else { + u32 ext_phy_type = XGXS_EXT_PHY_TYPE(bp); + + switch (ext_phy_type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072: + cmd->port = PORT_FIBRE; + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + cmd->port = PORT_TP; + break; + + default: + DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n", + bp->ext_phy_config); + } + } else cmd->port = PORT_TP; - } cmd->phy_address = bp->phy_addr; cmd->transceiver = XCVR_INTERNAL; - if (bp->req_autoneg & AUTONEG_SPEED) { + if (bp->req_autoneg & AUTONEG_SPEED) cmd->autoneg = AUTONEG_ENABLE; - } else { + else cmd->autoneg = AUTONEG_DISABLE; - } cmd->maxtxpkt = 0; cmd->maxrxpkt = 0; @@ -7082,8 +7910,10 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) switch (cmd->port) { case PORT_TP: - if (!(bp->supported & SUPPORTED_TP)) + if (!(bp->supported & SUPPORTED_TP)) { + DP(NETIF_MSG_LINK, "TP not supported\n"); return -EINVAL; + } if (bp->phy_flags & PHY_XGXS_FLAG) { bnx2x_link_reset(bp); @@ -7093,8 +7923,10 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) break; case PORT_FIBRE: - if (!(bp->supported & SUPPORTED_FIBRE)) + if (!(bp->supported & SUPPORTED_FIBRE)) { + DP(NETIF_MSG_LINK, "FIBRE not supported\n"); return -EINVAL; + } if (!(bp->phy_flags & PHY_XGXS_FLAG)) { bnx2x_link_reset(bp); @@ -7104,12 +7936,15 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) break; default: + DP(NETIF_MSG_LINK, "Unknown port type\n"); return -EINVAL; } if (cmd->autoneg == AUTONEG_ENABLE) { - if (!(bp->supported & SUPPORTED_Autoneg)) + if (!(bp->supported & SUPPORTED_Autoneg)) { + DP(NETIF_MSG_LINK, "Aotoneg not supported\n"); return -EINVAL; + } /* advertise the requested speed and duplex if supported */ cmd->advertising &= bp->supported; @@ -7124,14 +7959,22 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) switch (cmd->speed) { case SPEED_10: if (cmd->duplex == DUPLEX_FULL) { - if (!(bp->supported & SUPPORTED_10baseT_Full)) + if (!(bp->supported & + SUPPORTED_10baseT_Full)) { + DP(NETIF_MSG_LINK, + "10M full not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_10baseT_Full | ADVERTISED_TP); } else { - if (!(bp->supported & SUPPORTED_10baseT_Half)) + if (!(bp->supported & + SUPPORTED_10baseT_Half)) { + DP(NETIF_MSG_LINK, + "10M half not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_10baseT_Half | ADVERTISED_TP); @@ -7141,15 +7984,21 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) case SPEED_100: if (cmd->duplex == DUPLEX_FULL) { if (!(bp->supported & - SUPPORTED_100baseT_Full)) + SUPPORTED_100baseT_Full)) { + DP(NETIF_MSG_LINK, + "100M full not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_100baseT_Full | ADVERTISED_TP); } else { if (!(bp->supported & - SUPPORTED_100baseT_Half)) + SUPPORTED_100baseT_Half)) { + DP(NETIF_MSG_LINK, + "100M half not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_100baseT_Half | ADVERTISED_TP); @@ -7157,39 +8006,54 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) break; case SPEED_1000: - if (cmd->duplex != DUPLEX_FULL) + if (cmd->duplex != DUPLEX_FULL) { + DP(NETIF_MSG_LINK, "1G half not supported\n"); return -EINVAL; + } - if (!(bp->supported & SUPPORTED_1000baseT_Full)) + if (!(bp->supported & SUPPORTED_1000baseT_Full)) { + DP(NETIF_MSG_LINK, "1G full not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_1000baseT_Full | ADVERTISED_TP); break; case SPEED_2500: - if (cmd->duplex != DUPLEX_FULL) + if (cmd->duplex != DUPLEX_FULL) { + DP(NETIF_MSG_LINK, + "2.5G half not supported\n"); return -EINVAL; + } - if (!(bp->supported & SUPPORTED_2500baseT_Full)) + if (!(bp->supported & SUPPORTED_2500baseX_Full)) { + DP(NETIF_MSG_LINK, + "2.5G full not supported\n"); return -EINVAL; + } - advertising = (ADVERTISED_2500baseT_Full | + advertising = (ADVERTISED_2500baseX_Full | ADVERTISED_TP); break; case SPEED_10000: - if (cmd->duplex != DUPLEX_FULL) + if (cmd->duplex != DUPLEX_FULL) { + DP(NETIF_MSG_LINK, "10G half not supported\n"); return -EINVAL; + } - if (!(bp->supported & SUPPORTED_10000baseT_Full)) + if (!(bp->supported & SUPPORTED_10000baseT_Full)) { + DP(NETIF_MSG_LINK, "10G full not supported\n"); return -EINVAL; + } advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE); break; default: + DP(NETIF_MSG_LINK, "Unsupported speed\n"); return -EINVAL; } @@ -7389,8 +8253,7 @@ static void bnx2x_disable_nvram_access(struct bnx2x *bp) static int bnx2x_nvram_read_dword(struct bnx2x *bp, u32 offset, u32 *ret_val, u32 cmd_flags) { - int rc; - int count, i; + int count, i, rc; u32 val; /* build the command word */ @@ -7510,8 +8373,7 @@ static int bnx2x_get_eeprom(struct net_device *dev, static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val, u32 cmd_flags) { - int rc; - int count, i; + int count, i, rc; /* build the command word */ cmd_flags |= MCPR_NVM_COMMAND_DOIT | MCPR_NVM_COMMAND_WR; @@ -7548,7 +8410,7 @@ static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val, return rc; } -#define BYTE_OFFSET(offset) (8 * (offset & 0x03)) +#define BYTE_OFFSET(offset) (8 * (offset & 0x03)) static int bnx2x_nvram_write1(struct bnx2x *bp, u32 offset, u8 *data_buf, int buf_size) @@ -7779,52 +8641,29 @@ static int bnx2x_set_pauseparam(struct net_device *dev, DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n", epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause); - bp->req_flow_ctrl = FLOW_CTRL_AUTO; if (epause->autoneg) { - bp->req_autoneg |= AUTONEG_FLOW_CTRL; - if (bp->dev->mtu <= 4500) { - bp->pause_mode = PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - } else { - bp->pause_mode = PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; + if (!(bp->supported & SUPPORTED_Autoneg)) { + DP(NETIF_MSG_LINK, "Aotoneg not supported\n"); + return -EINVAL; } - } else { + bp->req_autoneg |= AUTONEG_FLOW_CTRL; + } else bp->req_autoneg &= ~AUTONEG_FLOW_CTRL; - if (epause->rx_pause) - bp->req_flow_ctrl |= FLOW_CTRL_RX; - if (epause->tx_pause) - bp->req_flow_ctrl |= FLOW_CTRL_TX; - - switch (bp->req_flow_ctrl) { - case FLOW_CTRL_AUTO: - bp->req_flow_ctrl = FLOW_CTRL_NONE; - bp->pause_mode = PAUSE_NONE; - bp->advertising &= ~(ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - break; + bp->req_flow_ctrl = FLOW_CTRL_AUTO; - case FLOW_CTRL_TX: - bp->pause_mode = PAUSE_ASYMMETRIC; - bp->advertising |= ADVERTISED_Asym_Pause; - break; + if (epause->rx_pause) + bp->req_flow_ctrl |= FLOW_CTRL_RX; + if (epause->tx_pause) + bp->req_flow_ctrl |= FLOW_CTRL_TX; - case FLOW_CTRL_RX: - case FLOW_CTRL_BOTH: - bp->pause_mode = PAUSE_BOTH; - bp->advertising |= (ADVERTISED_Pause | - ADVERTISED_Asym_Pause); - break; - } - } + if (!(bp->req_autoneg & AUTONEG_FLOW_CTRL) && + (bp->req_flow_ctrl == FLOW_CTRL_AUTO)) + bp->req_flow_ctrl = FLOW_CTRL_NONE; - DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_flow_ctrl 0x%x\n" - DP_LEVEL " pause_mode %d advertising 0x%x\n", - bp->req_autoneg, bp->req_flow_ctrl, bp->pause_mode, - bp->advertising); + DP(NETIF_MSG_LINK, "req_autoneg 0x%x req_flow_ctrl 0x%x\n", + bp->req_autoneg, bp->req_flow_ctrl); bnx2x_stop_stats(bp); bnx2x_link_initialize(bp); diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index ea9100855c5..dc423e58dad 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -24,6 +24,8 @@ #define BNX2X_MSG_STATS 0x20000 /* was: NETIF_MSG_TIMER */ #define NETIF_MSG_NVM 0x40000 /* was: NETIF_MSG_HW */ #define NETIF_MSG_DMAE 0x80000 /* was: NETIF_MSG_HW */ +#define BNX2X_MSG_SP 0x100000 /* was: NETIF_MSG_INTR */ +#define BNX2X_MSG_FP 0x200000 /* was: NETIF_MSG_INTR */ #define DP_LEVEL KERN_NOTICE /* was: KERN_DEBUG */ @@ -40,6 +42,12 @@ __LINE__, bp->dev?(bp->dev->name):"?", ##__args); \ } while (0) +/* for logging (never masked) */ +#define BNX2X_LOG(__fmt, __args...) do { \ + printk(KERN_NOTICE "[%s:%d(%s)]" __fmt, __FUNCTION__, \ + __LINE__, bp->dev?(bp->dev->name):"?", ##__args); \ + } while (0) + /* before we have a dev->name use dev_info() */ #define BNX2X_DEV_INFO(__fmt, __args...) do { \ if (bp->msglevel & NETIF_MSG_PROBE) \ @@ -574,7 +582,8 @@ struct bnx2x { u32 fw_mb; u32 hw_config; - u32 serdes_config; + u32 board; + u32 serdes_config; u32 lane_config; u32 ext_phy_config; #define XGXS_EXT_PHY_TYPE(bp) (bp->ext_phy_config & \ @@ -595,11 +604,11 @@ struct bnx2x { u8 tx_lane_swap; u8 link_up; + u8 phy_link_up; u32 supported; /* link settings - missing defines */ #define SUPPORTED_2500baseT_Full (1 << 15) -#define SUPPORTED_CX4 (1 << 16) u32 phy_flags; /*#define PHY_SERDES_FLAG 0x1*/ @@ -644,16 +653,9 @@ struct bnx2x { #define FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH #define FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE - u32 pause_mode; -#define PAUSE_NONE 0 -#define PAUSE_SYMMETRIC 1 -#define PAUSE_ASYMMETRIC 2 -#define PAUSE_BOTH 3 - u32 advertising; /* link settings - missing defines */ #define ADVERTISED_2500baseT_Full (1 << 15) -#define ADVERTISED_CX4 (1 << 16) u32 link_status; u32 line_speed; @@ -667,6 +669,8 @@ struct bnx2x { #define NVRAM_TIMEOUT_COUNT 30000 #define NVRAM_PAGE_SIZE 256 + u8 wol; + int rx_ring_size; u16 tx_quick_cons_trip_int; @@ -718,9 +722,6 @@ struct bnx2x { #endif char *name; - u16 bus_speed_mhz; - u8 wol; - u8 pad; /* used to synchronize stats collecting */ int stats_state; @@ -873,6 +874,7 @@ struct bnx2x { #define PCICFG_LINK_SPEED 0xf0000 #define PCICFG_LINK_SPEED_SHIFT 16 +#define BMAC_CONTROL_RX_ENABLE 2 /* stuff added to make the code fit 80Col */ #define TPA_TYPE_START ETH_FAST_PATH_RX_CQE_START_FLG @@ -944,13 +946,13 @@ struct bnx2x { #define LINK_16GTFD LINK_STATUS_SPEED_AND_DUPLEX_16GTFD #define LINK_16GXFD LINK_STATUS_SPEED_AND_DUPLEX_16GXFD -#define NIG_STATUS_INTERRUPT_XGXS0_LINK10G \ +#define NIG_STATUS_XGXS0_LINK10G \ NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G -#define NIG_XGXS0_LINK_STATUS \ +#define NIG_STATUS_XGXS0_LINK_STATUS \ NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS -#define NIG_XGXS0_LINK_STATUS_SIZE \ +#define NIG_STATUS_XGXS0_LINK_STATUS_SIZE \ NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE -#define NIG_SERDES0_LINK_STATUS \ +#define NIG_STATUS_SERDES0_LINK_STATUS \ NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS #define NIG_MASK_MI_INT \ NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT diff --git a/drivers/net/bnx2x_fw_defs.h b/drivers/net/bnx2x_fw_defs.h index 62a6eb81025..3b968904ca6 100644 --- a/drivers/net/bnx2x_fw_defs.h +++ b/drivers/net/bnx2x_fw_defs.h @@ -1,6 +1,6 @@ /* bnx2x_fw_defs.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h index 6fd959c34d1..b21075ccb52 100644 --- a/drivers/net/bnx2x_hsi.h +++ b/drivers/net/bnx2x_hsi.h @@ -1,6 +1,6 @@ /* bnx2x_hsi.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -8,169 +8,9 @@ */ -#define FUNC_0 0 -#define FUNC_1 1 -#define FUNC_MAX 2 - - -/* This value (in milliseconds) determines the frequency of the driver - * issuing the PULSE message code. The firmware monitors this periodic - * pulse to determine when to switch to an OS-absent mode. */ -#define DRV_PULSE_PERIOD_MS 250 - -/* This value (in milliseconds) determines how long the driver should - * wait for an acknowledgement from the firmware before timing out. Once - * the firmware has timed out, the driver will assume there is no firmware - * running and there won't be any firmware-driver synchronization during a - * driver reset. */ -#define FW_ACK_TIME_OUT_MS 5000 - -#define FW_ACK_POLL_TIME_MS 1 - -#define FW_ACK_NUM_OF_POLL (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS) - -/* LED Blink rate that will achieve ~15.9Hz */ -#define LED_BLINK_RATE_VAL 480 - -/**************************************************************************** - * Driver <-> FW Mailbox * - ****************************************************************************/ -struct drv_fw_mb { - u32 drv_mb_header; -#define DRV_MSG_CODE_MASK 0xffff0000 -#define DRV_MSG_CODE_LOAD_REQ 0x10000000 -#define DRV_MSG_CODE_LOAD_DONE 0x11000000 -#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN 0x20000000 -#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS 0x20010000 -#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP 0x20020000 -#define DRV_MSG_CODE_UNLOAD_DONE 0x21000000 -#define DRV_MSG_CODE_DIAG_ENTER_REQ 0x50000000 -#define DRV_MSG_CODE_DIAG_EXIT_REQ 0x60000000 -#define DRV_MSG_CODE_VALIDATE_KEY 0x70000000 -#define DRV_MSG_CODE_GET_CURR_KEY 0x80000000 -#define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000 -#define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000 -#define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000 - -#define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff - - u32 drv_mb_param; - - u32 fw_mb_header; -#define FW_MSG_CODE_MASK 0xffff0000 -#define FW_MSG_CODE_DRV_LOAD_COMMON 0x11000000 -#define FW_MSG_CODE_DRV_LOAD_PORT 0x12000000 -#define FW_MSG_CODE_DRV_LOAD_REFUSED 0x13000000 -#define FW_MSG_CODE_DRV_LOAD_DONE 0x14000000 -#define FW_MSG_CODE_DRV_UNLOAD_COMMON 0x21000000 -#define FW_MSG_CODE_DRV_UNLOAD_PORT 0x22000000 -#define FW_MSG_CODE_DRV_UNLOAD_DONE 0x23000000 -#define FW_MSG_CODE_DIAG_ENTER_DONE 0x50000000 -#define FW_MSG_CODE_DIAG_REFUSE 0x51000000 -#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS 0x70000000 -#define FW_MSG_CODE_VALIDATE_KEY_FAILURE 0x71000000 -#define FW_MSG_CODE_GET_KEY_DONE 0x80000000 -#define FW_MSG_CODE_NO_KEY 0x8f000000 -#define FW_MSG_CODE_LIC_INFO_NOT_READY 0x8f800000 -#define FW_MSG_CODE_L2B_PRAM_LOADED 0x90000000 -#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE 0x91000000 -#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x92000000 -#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x93000000 -#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x94000000 - -#define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff - - u32 fw_mb_param; - - u32 link_status; - /* Driver should update this field on any link change event */ - -#define LINK_STATUS_LINK_FLAG_MASK 0x00000001 -#define LINK_STATUS_LINK_UP 0x00000001 -#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001E -#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE (0<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10THD (1<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD (2<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD (3<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_100T4 (4<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD (5<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (6<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (7<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD (7<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD (8<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD (9<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD (9<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD (10<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD (10<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD (11<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD (11<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD (12<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD (12<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD (13<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD (13<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD (14<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD (14<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD (15<<1) -#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD (15<<1) - -#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK 0x00000020 -#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020 - -#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040 -#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK 0x00000080 -#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080 - -#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200 -#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400 -#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE 0x00000800 -#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE 0x00001000 -#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE 0x00002000 -#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE 0x00004000 -#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE 0x00008000 - -#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK 0x00010000 -#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00010000 - -#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK 0x00020000 -#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00020000 - -#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000 -#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0<<18) -#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1<<18) -#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2<<18) -#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3<<18) - -#define LINK_STATUS_SERDES_LINK 0x00100000 - -#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE 0x00200000 -#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE 0x00400000 -#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE 0x00800000 -#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE 0x01000000 -#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE 0x02000000 -#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE 0x04000000 -#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE 0x08000000 -#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE 0x10000000 - - u32 drv_pulse_mb; -#define DRV_PULSE_SEQ_MASK 0x00007fff -#define DRV_PULSE_SYSTEM_TIME_MASK 0xffff0000 - /* The system time is in the format of - * (year-2001)*12*32 + month*32 + day. */ -#define DRV_PULSE_ALWAYS_ALIVE 0x00008000 - /* Indicate to the firmware not to go into the - * OS-absent when it is not getting driver pulse. - * This is used for debugging as well for PXE(MBA). */ - - u32 mcp_pulse_mb; -#define MCP_PULSE_SEQ_MASK 0x00007fff -#define MCP_PULSE_ALWAYS_ALIVE 0x00008000 - /* Indicates to the driver not to assert due to lack - * of MCP response */ -#define MCP_EVENT_MASK 0xffff0000 -#define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000 - -}; - +#define PORT_0 0 +#define PORT_1 1 +#define PORT_MAX 2 /**************************************************************************** * Shared HW configuration * @@ -249,7 +89,7 @@ struct shared_hw_cfg { /* NVRAM Offset */ #define SHARED_HW_CFG_SMBUS_TIMING_100KHZ 0x00000000 #define SHARED_HW_CFG_SMBUS_TIMING_400KHZ 0x00001000 -#define SHARED_HW_CFG_HIDE_FUNC1 0x00002000 +#define SHARED_HW_CFG_HIDE_PORT1 0x00002000 u32 power_dissipated; /* 0x11c */ #define SHARED_HW_CFG_POWER_DIS_CMN_MASK 0xff000000 @@ -290,6 +130,8 @@ struct shared_hw_cfg { /* NVRAM Offset */ #define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1015G 0x00000006 #define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1020G 0x00000007 #define SHARED_HW_CFG_BOARD_TYPE_BCM957710T1003G 0x00000008 +#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G 0x00000009 +#define SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G 0x0000000a #define SHARED_HW_CFG_BOARD_VER_MASK 0xffff0000 #define SHARED_HW_CFG_BOARD_VER_SHIFT 16 @@ -304,13 +146,12 @@ struct shared_hw_cfg { /* NVRAM Offset */ }; + /**************************************************************************** * Port HW configuration * ****************************************************************************/ -struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */ +struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ - /* Fields below are port specific (in anticipation of dual port - devices */ u32 pci_id; #define PORT_HW_CFG_PCI_VENDOR_ID_MASK 0xffff0000 #define PORT_HW_CFG_PCI_DEVICE_ID_MASK 0x0000ffff @@ -420,6 +261,8 @@ struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */ #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706 0x00000500 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8276 0x00000600 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481 0x00000700 +#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101 0x00000800 +#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE 0x0000fd00 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN 0x0000ff00 #define PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK 0x000000ff @@ -462,11 +305,13 @@ struct port_hw_cfg { /* function 0: 0x12c-0x2bb, function 1: 0x2bc-0x44b */ }; + /**************************************************************************** * Shared Feature configuration * ****************************************************************************/ struct shared_feat_cfg { /* NVRAM Offset */ - u32 bmc_common; /* 0x450 */ + + u32 config; /* 0x450 */ #define SHARED_FEATURE_BMC_ECHO_MODE_EN 0x00000001 }; @@ -475,7 +320,8 @@ struct shared_feat_cfg { /* NVRAM Offset */ /**************************************************************************** * Port Feature configuration * ****************************************************************************/ -struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */ +struct port_feat_cfg { /* port 0: 0x454 port 1: 0x4c8 */ + u32 config; #define PORT_FEATURE_BAR1_SIZE_MASK 0x0000000f #define PORT_FEATURE_BAR1_SIZE_SHIFT 0 @@ -609,8 +455,7 @@ struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */ #define PORT_FEATURE_SMBUS_ADDR_MASK 0x000000fe #define PORT_FEATURE_SMBUS_ADDR_SHIFT 1 - u32 iscsib_boot_cfg; -#define PORT_FEATURE_ISCSIB_SKIP_TARGET_BOOT 0x00000001 + u32 reserved1; u32 link_config; /* Used as HW defaults for the driver */ #define PORT_FEATURE_CONNECTED_SWITCH_MASK 0x03000000 @@ -657,20 +502,201 @@ struct port_feat_cfg { /* function 0: 0x454-0x4c7, function 1: 0x4c8-0x53b */ }; +/***************************************************************************** + * Device Information * + *****************************************************************************/ +struct dev_info { /* size */ + + u32 bc_rev; /* 8 bits each: major, minor, build */ /* 4 */ + + struct shared_hw_cfg shared_hw_config; /* 40 */ + + struct port_hw_cfg port_hw_config[PORT_MAX]; /* 400*2=800 */ + + struct shared_feat_cfg shared_feature_config; /* 4 */ + + struct port_feat_cfg port_feature_config[PORT_MAX]; /* 116*2=232 */ + +}; + + +#define FUNC_0 0 +#define FUNC_1 1 +#define E1_FUNC_MAX 2 +#define FUNC_MAX E1_FUNC_MAX + + +/* This value (in milliseconds) determines the frequency of the driver + * issuing the PULSE message code. The firmware monitors this periodic + * pulse to determine when to switch to an OS-absent mode. */ +#define DRV_PULSE_PERIOD_MS 250 + +/* This value (in milliseconds) determines how long the driver should + * wait for an acknowledgement from the firmware before timing out. Once + * the firmware has timed out, the driver will assume there is no firmware + * running and there won't be any firmware-driver synchronization during a + * driver reset. */ +#define FW_ACK_TIME_OUT_MS 5000 + +#define FW_ACK_POLL_TIME_MS 1 + +#define FW_ACK_NUM_OF_POLL (FW_ACK_TIME_OUT_MS/FW_ACK_POLL_TIME_MS) + +/* LED Blink rate that will achieve ~15.9Hz */ +#define LED_BLINK_RATE_VAL 480 + /**************************************************************************** - * Device Information * + * Driver <-> FW Mailbox * ****************************************************************************/ -struct dev_info { /* size */ +struct drv_port_mb { + + u32 link_status; + /* Driver should update this field on any link change event */ + +#define LINK_STATUS_LINK_FLAG_MASK 0x00000001 +#define LINK_STATUS_LINK_UP 0x00000001 +#define LINK_STATUS_SPEED_AND_DUPLEX_MASK 0x0000001E +#define LINK_STATUS_SPEED_AND_DUPLEX_AN_NOT_COMPLETE (0<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10THD (1<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10TFD (2<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_100TXHD (3<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_100T4 (4<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_100TXFD (5<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_1000THD (6<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_1000TFD (7<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_1000XFD (7<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_2500THD (8<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_2500TFD (9<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_2500XFD (9<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10GTFD (10<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_10GXFD (10<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12GTFD (11<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12GXFD (11<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GTFD (12<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_12_5GXFD (12<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_13GTFD (13<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_13GXFD (13<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_15GTFD (14<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_15GXFD (14<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_16GTFD (15<<1) +#define LINK_STATUS_SPEED_AND_DUPLEX_16GXFD (15<<1) + +#define LINK_STATUS_AUTO_NEGOTIATE_FLAG_MASK 0x00000020 +#define LINK_STATUS_AUTO_NEGOTIATE_ENABLED 0x00000020 + +#define LINK_STATUS_AUTO_NEGOTIATE_COMPLETE 0x00000040 +#define LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK 0x00000080 +#define LINK_STATUS_PARALLEL_DETECTION_USED 0x00000080 + +#define LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE 0x00000200 +#define LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE 0x00000400 +#define LINK_STATUS_LINK_PARTNER_100T4_CAPABLE 0x00000800 +#define LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE 0x00001000 +#define LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE 0x00002000 +#define LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE 0x00004000 +#define LINK_STATUS_LINK_PARTNER_10THD_CAPABLE 0x00008000 + +#define LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK 0x00010000 +#define LINK_STATUS_TX_FLOW_CONTROL_ENABLED 0x00010000 + +#define LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK 0x00020000 +#define LINK_STATUS_RX_FLOW_CONTROL_ENABLED 0x00020000 + +#define LINK_STATUS_LINK_PARTNER_FLOW_CONTROL_MASK 0x000C0000 +#define LINK_STATUS_LINK_PARTNER_NOT_PAUSE_CAPABLE (0<<18) +#define LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE (1<<18) +#define LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE (2<<18) +#define LINK_STATUS_LINK_PARTNER_BOTH_PAUSE (3<<18) + +#define LINK_STATUS_SERDES_LINK 0x00100000 + +#define LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE 0x00200000 +#define LINK_STATUS_LINK_PARTNER_2500XHD_CAPABLE 0x00400000 +#define LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE 0x00800000 +#define LINK_STATUS_LINK_PARTNER_12GXFD_CAPABLE 0x01000000 +#define LINK_STATUS_LINK_PARTNER_12_5GXFD_CAPABLE 0x02000000 +#define LINK_STATUS_LINK_PARTNER_13GXFD_CAPABLE 0x04000000 +#define LINK_STATUS_LINK_PARTNER_15GXFD_CAPABLE 0x08000000 +#define LINK_STATUS_LINK_PARTNER_16GXFD_CAPABLE 0x10000000 - u32 bc_rev; /* 8 bits each: major, minor, build */ /* 4 */ + u32 reserved[3]; - struct shared_hw_cfg shared_hw_config; /* 40 */ +}; + + +struct drv_func_mb { + + u32 drv_mb_header; +#define DRV_MSG_CODE_MASK 0xffff0000 +#define DRV_MSG_CODE_LOAD_REQ 0x10000000 +#define DRV_MSG_CODE_LOAD_DONE 0x11000000 +#define DRV_MSG_CODE_UNLOAD_REQ_WOL_EN 0x20000000 +#define DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS 0x20010000 +#define DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP 0x20020000 +#define DRV_MSG_CODE_UNLOAD_DONE 0x21000000 +#define DRV_MSG_CODE_DIAG_ENTER_REQ 0x50000000 +#define DRV_MSG_CODE_DIAG_EXIT_REQ 0x60000000 +#define DRV_MSG_CODE_VALIDATE_KEY 0x70000000 +#define DRV_MSG_CODE_GET_CURR_KEY 0x80000000 +#define DRV_MSG_CODE_GET_UPGRADE_KEY 0x81000000 +#define DRV_MSG_CODE_GET_MANUF_KEY 0x82000000 +#define DRV_MSG_CODE_LOAD_L2B_PRAM 0x90000000 + +#define DRV_MSG_SEQ_NUMBER_MASK 0x0000ffff + + u32 drv_mb_param; + + u32 fw_mb_header; +#define FW_MSG_CODE_MASK 0xffff0000 +#define FW_MSG_CODE_DRV_LOAD_COMMON 0x10100000 +#define FW_MSG_CODE_DRV_LOAD_PORT 0x10110000 +#define FW_MSG_CODE_DRV_LOAD_FUNCTION 0x10120000 +#define FW_MSG_CODE_DRV_LOAD_REFUSED 0x10200000 +#define FW_MSG_CODE_DRV_LOAD_DONE 0x11100000 +#define FW_MSG_CODE_DRV_UNLOAD_COMMON 0x20100000 +#define FW_MSG_CODE_DRV_UNLOAD_PORT 0x20110000 +#define FW_MSG_CODE_DRV_UNLOAD_FUNCTION 0x20120000 +#define FW_MSG_CODE_DRV_UNLOAD_DONE 0x21100000 +#define FW_MSG_CODE_DIAG_ENTER_DONE 0x50100000 +#define FW_MSG_CODE_DIAG_REFUSE 0x50200000 +#define FW_MSG_CODE_DIAG_EXIT_DONE 0x60100000 +#define FW_MSG_CODE_VALIDATE_KEY_SUCCESS 0x70100000 +#define FW_MSG_CODE_VALIDATE_KEY_FAILURE 0x70200000 +#define FW_MSG_CODE_GET_KEY_DONE 0x80100000 +#define FW_MSG_CODE_NO_KEY 0x80f00000 +#define FW_MSG_CODE_LIC_INFO_NOT_READY 0x80f80000 +#define FW_MSG_CODE_L2B_PRAM_LOADED 0x90100000 +#define FW_MSG_CODE_L2B_PRAM_T_LOAD_FAILURE 0x90210000 +#define FW_MSG_CODE_L2B_PRAM_C_LOAD_FAILURE 0x90220000 +#define FW_MSG_CODE_L2B_PRAM_X_LOAD_FAILURE 0x90230000 +#define FW_MSG_CODE_L2B_PRAM_U_LOAD_FAILURE 0x90240000 + +#define FW_MSG_SEQ_NUMBER_MASK 0x0000ffff + + u32 fw_mb_param; + + u32 drv_pulse_mb; +#define DRV_PULSE_SEQ_MASK 0x00007fff +#define DRV_PULSE_SYSTEM_TIME_MASK 0xffff0000 + /* The system time is in the format of + * (year-2001)*12*32 + month*32 + day. */ +#define DRV_PULSE_ALWAYS_ALIVE 0x00008000 + /* Indicate to the firmware not to go into the + * OS-absent when it is not getting driver pulse. + * This is used for debugging as well for PXE(MBA). */ - struct port_hw_cfg port_hw_config[FUNC_MAX]; /* 400*2=800 */ + u32 mcp_pulse_mb; +#define MCP_PULSE_SEQ_MASK 0x00007fff +#define MCP_PULSE_ALWAYS_ALIVE 0x00008000 + /* Indicates to the driver not to assert due to lack + * of MCP response */ +#define MCP_EVENT_MASK 0xffff0000 +#define MCP_EVENT_OTHER_DRIVER_RESET_REQ 0x00010000 - struct shared_feat_cfg shared_feature_config; /* 4 */ + u32 iscsi_boot_signature; + u32 iscsi_boot_block_offset; - struct port_feat_cfg port_feature_config[FUNC_MAX];/* 116*2=232 */ + u32 reserved[3]; }; @@ -678,9 +704,8 @@ struct dev_info { /* size */ /**************************************************************************** * Management firmware state * ****************************************************************************/ -/* Allocate 320 bytes for management firmware: still not known exactly - * how much IMD needs. */ -#define MGMTFW_STATE_WORD_SIZE 80 +/* Allocate 440 bytes for management firmware */ +#define MGMTFW_STATE_WORD_SIZE 110 struct mgmtfw_state { u32 opaque[MGMTFW_STATE_WORD_SIZE]; @@ -691,31 +716,40 @@ struct mgmtfw_state { * Shared Memory Region * ****************************************************************************/ struct shmem_region { /* SharedMem Offset (size) */ - u32 validity_map[FUNC_MAX]; /* 0x0 (4 * 2 = 0x8) */ -#define SHR_MEM_VALIDITY_PCI_CFG 0x00000001 -#define SHR_MEM_VALIDITY_MB 0x00000002 -#define SHR_MEM_VALIDITY_DEV_INFO 0x00000004 + + u32 validity_map[PORT_MAX]; /* 0x0 (4*2 = 0x8) */ +#define SHR_MEM_FORMAT_REV_ID ('A'<<24) +#define SHR_MEM_FORMAT_REV_MASK 0xff000000 + /* validity bits */ +#define SHR_MEM_VALIDITY_PCI_CFG 0x00100000 +#define SHR_MEM_VALIDITY_MB 0x00200000 +#define SHR_MEM_VALIDITY_DEV_INFO 0x00400000 +#define SHR_MEM_VALIDITY_RESERVED 0x00000007 /* One licensing bit should be set */ #define SHR_MEM_VALIDITY_LIC_KEY_IN_EFFECT_MASK 0x00000038 #define SHR_MEM_VALIDITY_LIC_MANUF_KEY_IN_EFFECT 0x00000008 #define SHR_MEM_VALIDITY_LIC_UPGRADE_KEY_IN_EFFECT 0x00000010 #define SHR_MEM_VALIDITY_LIC_NO_KEY_IN_EFFECT 0x00000020 + /* Active MFW */ +#define SHR_MEM_VALIDITY_ACTIVE_MFW_UNKNOWN 0x00000000 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_IPMI 0x00000040 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_UMP 0x00000080 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_NCSI 0x000000c0 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_NONE 0x000001c0 +#define SHR_MEM_VALIDITY_ACTIVE_MFW_MASK 0x000001c0 - struct drv_fw_mb drv_fw_mb[FUNC_MAX]; /* 0x8 (28 * 2 = 0x38) */ - - struct dev_info dev_info; /* 0x40 (0x438) */ + struct dev_info dev_info; /* 0x8 (0x438) */ -#ifdef _LICENSE_H - license_key_t drv_lic_key[FUNC_MAX]; /* 0x478 (52 * 2 = 0x68) */ -#else /* Linux! */ - u8 reserved[52*FUNC_MAX]; -#endif + u8 reserved[52*PORT_MAX]; /* FW information (for internal FW use) */ - u32 fw_info_fio_offset; /* 0x4e0 (0x4) */ - struct mgmtfw_state mgmtfw_state; /* 0x4e4 (0x140) */ + u32 fw_info_fio_offset; /* 0x4a8 (0x4) */ + struct mgmtfw_state mgmtfw_state; /* 0x4ac (0x1b8) */ + + struct drv_port_mb port_mb[PORT_MAX]; /* 0x664 (16*2=0x20) */ + struct drv_func_mb func_mb[FUNC_MAX]; /* 0x684 (44*2=0x58) */ -}; /* 0x624 */ +}; /* 0x6dc */ #define BCM_5710_FW_MAJOR_VERSION 4 diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index 86055297ab0..5a1aa0b5504 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -1,6 +1,6 @@ /* bnx2x_reg.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -24,6 +24,8 @@ #define BRB1_REG_BRB1_INT_STS 0x6011c /* [RW 4] Parity mask register #0 read/write */ #define BRB1_REG_BRB1_PRTY_MASK 0x60138 +/* [R 4] Parity register #0 read */ +#define BRB1_REG_BRB1_PRTY_STS 0x6012c /* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. */ @@ -281,6 +283,8 @@ #define CDU_REG_CDU_INT_STS 0x101030 /* [RW 5] Parity mask register #0 read/write */ #define CDU_REG_CDU_PRTY_MASK 0x10104c +/* [R 5] Parity register #0 read */ +#define CDU_REG_CDU_PRTY_STS 0x101040 /* [RC 32] logging of error data in case of a CDU load error: {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error; ype_error; ctual_active; ctual_compressed_context}; */ @@ -308,6 +312,8 @@ #define CFC_REG_CFC_INT_STS_CLR 0x104100 /* [RW 4] Parity mask register #0 read/write */ #define CFC_REG_CFC_PRTY_MASK 0x104118 +/* [R 4] Parity register #0 read */ +#define CFC_REG_CFC_PRTY_STS 0x10410c /* [RW 21] CID cam access (21:1 - Data; alid - 0) */ #define CFC_REG_CID_CAM 0x104800 #define CFC_REG_CONTROL0 0x104028 @@ -354,6 +360,8 @@ #define CSDM_REG_CSDM_INT_MASK_1 0xc22ac /* [RW 11] Parity mask register #0 read/write */ #define CSDM_REG_CSDM_PRTY_MASK 0xc22bc +/* [R 11] Parity register #0 read */ +#define CSDM_REG_CSDM_PRTY_STS 0xc22b0 #define CSDM_REG_ENABLE_IN1 0xc2238 #define CSDM_REG_ENABLE_IN2 0xc223c #define CSDM_REG_ENABLE_OUT1 0xc2240 @@ -438,6 +446,9 @@ /* [RW 32] Parity mask register #0 read/write */ #define CSEM_REG_CSEM_PRTY_MASK_0 0x200130 #define CSEM_REG_CSEM_PRTY_MASK_1 0x200140 +/* [R 32] Parity register #0 read */ +#define CSEM_REG_CSEM_PRTY_STS_0 0x200124 +#define CSEM_REG_CSEM_PRTY_STS_1 0x200134 #define CSEM_REG_ENABLE_IN 0x2000a4 #define CSEM_REG_ENABLE_OUT 0x2000a8 /* [RW 32] This address space contains all registers and memories that are @@ -526,6 +537,8 @@ #define CSEM_REG_TS_9_AS 0x20005c /* [RW 1] Parity mask register #0 read/write */ #define DBG_REG_DBG_PRTY_MASK 0xc0a8 +/* [R 1] Parity register #0 read */ +#define DBG_REG_DBG_PRTY_STS 0xc09c /* [RW 2] debug only: These bits indicate the credit for PCI request type 4 interface; MUST be configured AFTER pci_ext_buffer_strt_addr_lsb/msb are configured */ @@ -543,6 +556,8 @@ #define DMAE_REG_DMAE_INT_MASK 0x102054 /* [RW 4] Parity mask register #0 read/write */ #define DMAE_REG_DMAE_PRTY_MASK 0x102064 +/* [R 4] Parity register #0 read */ +#define DMAE_REG_DMAE_PRTY_STS 0x102058 /* [RW 1] Command 0 go. */ #define DMAE_REG_GO_C0 0x102080 /* [RW 1] Command 1 go. */ @@ -623,6 +638,8 @@ #define DORQ_REG_DORQ_INT_STS_CLR 0x170178 /* [RW 2] Parity mask register #0 read/write */ #define DORQ_REG_DORQ_PRTY_MASK 0x170190 +/* [R 2] Parity register #0 read */ +#define DORQ_REG_DORQ_PRTY_STS 0x170184 /* [RW 8] The address to write the DPM CID to STORM. */ #define DORQ_REG_DPM_CID_ADDR 0x170044 /* [RW 5] The DPM mode CID extraction offset. */ @@ -692,6 +709,8 @@ #define HC_REG_CONFIG_1 0x108004 /* [RW 3] Parity mask register #0 read/write */ #define HC_REG_HC_PRTY_MASK 0x1080a0 +/* [R 3] Parity register #0 read */ +#define HC_REG_HC_PRTY_STS 0x108094 /* [RW 17] status block interrupt mask; one in each bit means unmask; zerow in each bit means mask; bit 0 - default SB; bit 1 - SB_0; bit 2 - SB_1... bit 16- SB_15; addr 0 - port 0; addr 1 - port 1 */ @@ -1127,6 +1146,7 @@ #define MISC_REG_AEU_GENERAL_ATTN_17 0xa044 #define MISC_REG_AEU_GENERAL_ATTN_18 0xa048 #define MISC_REG_AEU_GENERAL_ATTN_19 0xa04c +#define MISC_REG_AEU_GENERAL_ATTN_10 0xa028 #define MISC_REG_AEU_GENERAL_ATTN_11 0xa02c #define MISC_REG_AEU_GENERAL_ATTN_2 0xa008 #define MISC_REG_AEU_GENERAL_ATTN_20 0xa050 @@ -1135,6 +1155,9 @@ #define MISC_REG_AEU_GENERAL_ATTN_4 0xa010 #define MISC_REG_AEU_GENERAL_ATTN_5 0xa014 #define MISC_REG_AEU_GENERAL_ATTN_6 0xa018 +#define MISC_REG_AEU_GENERAL_ATTN_7 0xa01c +#define MISC_REG_AEU_GENERAL_ATTN_8 0xa020 +#define MISC_REG_AEU_GENERAL_ATTN_9 0xa024 /* [RW 32] first 32b for inverting the input for function 0; for each bit: 0= do not invert; 1= invert; mapped as follows: [0] NIG attention for function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp; @@ -1183,6 +1206,40 @@ starts at 0x0 for the A0 tape-out and increments by one for each all-layer tape-out. */ #define MISC_REG_CHIP_REV 0xa40c +/* [RW 32] The following driver registers(1..6) represent 6 drivers and 32 + clients. Each client can be controlled by one driver only. One in each + bit represent that this driver control the appropriate client (Ex: bit 5 + is set means this driver control client number 5). addr1 = set; addr0 = + clear; read from both addresses will give the same result = status. write + to address 1 will set a request to control all the clients that their + appropriate bit (in the write command) is set. if the client is free (the + appropriate bit in all the other drivers is clear) one will be written to + that driver register; if the client isn't free the bit will remain zero. + if the appropriate bit is set (the driver request to gain control on a + client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW + interrupt will be asserted). write to address 0 will set a request to + free all the clients that their appropriate bit (in the write command) is + set. if the appropriate bit is clear (the driver request to free a client + it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will + be asserted). */ +#define MISC_REG_DRIVER_CONTROL_1 0xa510 +/* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of + these bits is written as a '1'; the corresponding SPIO bit will turn off + it's drivers and become an input. This is the reset state of all GPIO + pins. The read value of these bits will be a '1' if that last command + (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff). + [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written + as a '1'; the corresponding GPIO bit will drive low. The read value of + these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for + this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0; + SET When any of these bits is written as a '1'; the corresponding GPIO + bit will drive high (if it has that capability). The read value of these + bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this + bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0; + RO; These bits indicate the read value of each of the eight GPIO pins. + This is the result value of the pin; not the drive value. Writing these + bits will have not effect. */ +#define MISC_REG_GPIO 0xa490 /* [RW 1] Setting this bit enables a timer in the GRC block to timeout any access that does not finish within ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is @@ -1223,6 +1280,8 @@ #define MISC_REG_MISC_INT_MASK 0xa388 /* [RW 1] Parity mask register #0 read/write */ #define MISC_REG_MISC_PRTY_MASK 0xa398 +/* [R 1] Parity register #0 read */ +#define MISC_REG_MISC_PRTY_STS 0xa38c /* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911. inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1 divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1 @@ -1264,6 +1323,55 @@ /* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is shared with the driver resides */ #define MISC_REG_SHARED_MEM_ADDR 0xa2b4 +/* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1'; + the corresponding SPIO bit will turn off it's drivers and become an + input. This is the reset state of all SPIO pins. The read value of these + bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this + bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits + is written as a '1'; the corresponding SPIO bit will drive low. The read + value of these bits will be a '1' if that last command (#SET; #CLR; or +#FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of + these bits is written as a '1'; the corresponding SPIO bit will drive + high (if it has that capability). The read value of these bits will be a + '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET. + (reset value 0). [7-0] VALUE RO; These bits indicate the read value of + each of the eight SPIO pins. This is the result value of the pin; not the + drive value. Writing these bits will have not effect. Each 8 bits field + is divided as follows: [0] VAUX Enable; when pulsed low; enables supply + from VAUX. (This is an output pin only; the FLOAT field is not applicable + for this pin); [1] VAUX Disable; when pulsed low; disables supply form + VAUX. (This is an output pin only; FLOAT field is not applicable for this + pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to + select VAUX supply. (This is an output pin only; it is not controlled by + the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT + field is not applicable for this pin; only the VALUE fields is relevant - + it reflects the output value); [3] reserved; [4] spio_4; [5] spio_5; [6] + Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP + device ID select; read by UMP firmware. */ +#define MISC_REG_SPIO 0xa4fc +/* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC. + according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5; + [7:0] reserved */ +#define MISC_REG_SPIO_EVENT_EN 0xa2b8 +/* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the + corresponding bit in the #OLD_VALUE register. This will acknowledge an + interrupt on the falling edge of corresponding SPIO input (reset value + 0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit + in the #OLD_VALUE register. This will acknowledge an interrupt on the + rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE + RO; These bits indicate the old value of the SPIO input value. When the + ~INT_STATE bit is set; this bit indicates the OLD value of the pin such + that if ~INT_STATE is set and this bit is '0'; then the interrupt is due + to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the + interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE + RO; These bits indicate the current SPIO interrupt state for each SPIO + pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR + command bit is written. This bit is set when the SPIO input does not + match the current value in #OLD_VALUE (reset value 0). */ +#define MISC_REG_SPIO_INT 0xa500 +/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are + loaded; 0-prepare; -unprepare */ +#define MISC_REG_UNPREPARED 0xa424 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT (0x1<<0) #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS (0x1<<9) #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G (0x1<<15) @@ -1392,6 +1500,9 @@ #define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC 0x10044 /* [RW 1] Input enable for RX PBF LP IF */ #define NIG_REG_PBF_LB_IN_EN 0x100b4 +/* [RW 1] Value of this register will be transmitted to port swap when + ~nig_registers_strap_override.strap_override =1 */ +#define NIG_REG_PORT_SWAP 0x10394 /* [RW 1] output enable for RX parser descriptor IF */ #define NIG_REG_PRS_EOP_OUT_EN 0x10104 /* [RW 1] Input enable for RX parser request IF */ @@ -1410,6 +1521,10 @@ #define NIG_REG_STAT2_BRB_OCTET 0x107e0 #define NIG_REG_STATUS_INTERRUPT_PORT0 0x10328 #define NIG_REG_STATUS_INTERRUPT_PORT1 0x1032c +/* [RW 1] port swap mux selection. If this register equal to 0 then port + swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then + ort swap is equal to ~nig_registers_port_swap.port_swap */ +#define NIG_REG_STRAP_OVERRIDE 0x10398 /* [RW 1] output enable for RX_XCM0 IF */ #define NIG_REG_XCM0_OUT_EN 0x100f0 /* [RW 1] output enable for RX_XCM1 IF */ @@ -1499,6 +1614,8 @@ #define PB_REG_PB_INT_STS 0x1c /* [RW 4] Parity mask register #0 read/write */ #define PB_REG_PB_PRTY_MASK 0x38 +/* [R 4] Parity register #0 read */ +#define PB_REG_PB_PRTY_STS 0x2c #define PRS_REG_A_PRSU_20 0x40134 /* [R 8] debug only: CFC load request current credit. Transaction based. */ #define PRS_REG_CFC_LD_CURRENT_CREDIT 0x40164 @@ -1590,6 +1707,8 @@ #define PRS_REG_PRS_INT_STS 0x40188 /* [RW 8] Parity mask register #0 read/write */ #define PRS_REG_PRS_PRTY_MASK 0x401a4 +/* [R 8] Parity register #0 read */ +#define PRS_REG_PRS_PRTY_STS 0x40198 /* [RW 8] Context region for pure acknowledge packets. Used in CFC load request message */ #define PRS_REG_PURE_REGIONS 0x40024 @@ -1718,6 +1837,9 @@ /* [RW 32] Parity mask register #0 read/write */ #define PXP2_REG_PXP2_PRTY_MASK_0 0x120588 #define PXP2_REG_PXP2_PRTY_MASK_1 0x120598 +/* [R 32] Parity register #0 read */ +#define PXP2_REG_PXP2_PRTY_STS_0 0x12057c +#define PXP2_REG_PXP2_PRTY_STS_1 0x12058c /* [R 1] Debug only: The 'almost full' indication from each fifo (gives indication about backpressure) */ #define PXP2_REG_RD_ALMOST_FULL_0 0x120424 @@ -1911,6 +2033,8 @@ #define PXP2_REG_RQ_HC_ENDIAN_M 0x1201a8 /* [WB 53] Onchip address table */ #define PXP2_REG_RQ_ONCHIP_AT 0x122000 +/* [RW 13] Pending read limiter threshold; in Dwords */ +#define PXP2_REG_RQ_PDR_LIMIT 0x12033c /* [RW 2] Endian mode for qm */ #define PXP2_REG_RQ_QM_ENDIAN_M 0x120194 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k; @@ -1921,6 +2045,9 @@ /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B; 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */ #define PXP2_REG_RQ_RD_MBS0 0x120160 +/* [RW 3] Max burst size filed for read requests port 1; 000 - 128B; + 001:256B; 010: 512B; 11:1K:100:2K; 01:4K */ +#define PXP2_REG_RQ_RD_MBS1 0x120168 /* [RW 2] Endian mode for src */ #define PXP2_REG_RQ_SRC_ENDIAN_M 0x12019c /* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k; @@ -2000,10 +2127,17 @@ /* [RW 3] Max burst size filed for write requests port 0; 000 - 128B; 001:256B; 010: 512B; */ #define PXP2_REG_RQ_WR_MBS0 0x12015c +/* [RW 3] Max burst size filed for write requests port 1; 000 - 128B; + 001:256B; 010: 512B; */ +#define PXP2_REG_RQ_WR_MBS1 0x120164 /* [RW 10] if Number of entries in dmae fifo will be higer than this threshold then has_payload indication will be asserted; the default value should be equal to > write MBS size! */ #define PXP2_REG_WR_DMAE_TH 0x120368 +/* [RW 10] if Number of entries in usdmdp fifo will be higer than this + threshold then has_payload indication will be asserted; the default value + should be equal to > write MBS size! */ +#define PXP2_REG_WR_USDMDP_TH 0x120348 /* [R 1] debug only: Indication if PSWHST arbiter is idle */ #define PXP_REG_HST_ARB_IS_IDLE 0x103004 /* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means @@ -2021,6 +2155,8 @@ #define PXP_REG_PXP_INT_STS_CLR_0 0x10306c /* [RW 26] Parity mask register #0 read/write */ #define PXP_REG_PXP_PRTY_MASK 0x103094 +/* [R 26] Parity register #0 read */ +#define PXP_REG_PXP_PRTY_STS 0x103088 /* [RW 4] The activity counter initial increment value sent in the load request */ #define QM_REG_ACTCTRINITVAL_0 0x168040 @@ -2127,6 +2263,8 @@ #define QM_REG_QM_INT_STS 0x168438 /* [RW 9] Parity mask register #0 read/write */ #define QM_REG_QM_PRTY_MASK 0x168454 +/* [R 9] Parity register #0 read */ +#define QM_REG_QM_PRTY_STS 0x168448 /* [R 32] Current queues in pipeline: Queues from 32 to 63 */ #define QM_REG_QSTATUS_HIGH 0x16802c /* [R 32] Current queues in pipeline: Queues from 0 to 31 */ @@ -2410,6 +2548,8 @@ #define SRC_REG_SRC_INT_STS 0x404ac /* [RW 3] Parity mask register #0 read/write */ #define SRC_REG_SRC_PRTY_MASK 0x404c8 +/* [R 3] Parity register #0 read */ +#define SRC_REG_SRC_PRTY_STS 0x404bc /* [R 4] Used to read the value of the XX protection CAM occupancy counter. */ #define TCM_REG_CAM_OCCUP 0x5017c /* [RW 1] CDU AG read Interface enable. If 0 - the request input is @@ -2730,6 +2870,8 @@ #define TSDM_REG_TSDM_INT_MASK_1 0x422ac /* [RW 11] Parity mask register #0 read/write */ #define TSDM_REG_TSDM_PRTY_MASK 0x422bc +/* [R 11] Parity register #0 read */ +#define TSDM_REG_TSDM_PRTY_STS 0x422b0 /* [RW 5] The number of time_slots in the arbitration cycle */ #define TSEM_REG_ARB_CYCLE_SIZE 0x180034 /* [RW 3] The source that is associated with arbitration element 0. Source @@ -2854,6 +2996,9 @@ /* [RW 32] Parity mask register #0 read/write */ #define TSEM_REG_TSEM_PRTY_MASK_0 0x180120 #define TSEM_REG_TSEM_PRTY_MASK_1 0x180130 +/* [R 32] Parity register #0 read */ +#define TSEM_REG_TSEM_PRTY_STS_0 0x180114 +#define TSEM_REG_TSEM_PRTY_STS_1 0x180124 /* [R 5] Used to read the XX protection CAM occupancy counter. */ #define UCM_REG_CAM_OCCUP 0xe0170 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is @@ -3155,6 +3300,8 @@ #define USDM_REG_USDM_INT_MASK_1 0xc42b0 /* [RW 11] Parity mask register #0 read/write */ #define USDM_REG_USDM_PRTY_MASK 0xc42c0 +/* [R 11] Parity register #0 read */ +#define USDM_REG_USDM_PRTY_STS 0xc42b4 /* [RW 5] The number of time_slots in the arbitration cycle */ #define USEM_REG_ARB_CYCLE_SIZE 0x300034 /* [RW 3] The source that is associated with arbitration element 0. Source @@ -3279,6 +3426,9 @@ /* [RW 32] Parity mask register #0 read/write */ #define USEM_REG_USEM_PRTY_MASK_0 0x300130 #define USEM_REG_USEM_PRTY_MASK_1 0x300140 +/* [R 32] Parity register #0 read */ +#define USEM_REG_USEM_PRTY_STS_0 0x300124 +#define USEM_REG_USEM_PRTY_STS_1 0x300134 /* [RW 2] The queue index for registration on Aux1 counter flag. */ #define XCM_REG_AUX1_Q 0x20134 /* [RW 2] Per each decision rule the queue index to register to. */ @@ -3684,6 +3834,8 @@ #define XSDM_REG_XSDM_INT_MASK_1 0x1662ac /* [RW 11] Parity mask register #0 read/write */ #define XSDM_REG_XSDM_PRTY_MASK 0x1662bc +/* [R 11] Parity register #0 read */ +#define XSDM_REG_XSDM_PRTY_STS 0x1662b0 /* [RW 5] The number of time_slots in the arbitration cycle */ #define XSEM_REG_ARB_CYCLE_SIZE 0x280034 /* [RW 3] The source that is associated with arbitration element 0. Source @@ -3808,6 +3960,9 @@ /* [RW 32] Parity mask register #0 read/write */ #define XSEM_REG_XSEM_PRTY_MASK_0 0x280130 #define XSEM_REG_XSEM_PRTY_MASK_1 0x280140 +/* [R 32] Parity register #0 read */ +#define XSEM_REG_XSEM_PRTY_STS_0 0x280124 +#define XSEM_REG_XSEM_PRTY_STS_1 0x280134 #define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0) #define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1) #define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0) @@ -3847,6 +4002,8 @@ #define EMAC_MDIO_COMM_START_BUSY (1L<<29) #define EMAC_MDIO_MODE_AUTO_POLL (1L<<4) #define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31) +#define EMAC_MDIO_MODE_CLOCK_CNT (0x3fL<<16) +#define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16 #define EMAC_MODE_25G_MODE (1L<<5) #define EMAC_MODE_ACPI_RCVD (1L<<20) #define EMAC_MODE_HALF_DUPLEX (1L<<1) @@ -3874,6 +4031,17 @@ #define EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31) #define EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3) #define EMAC_TX_MODE_RESET (1L<<0) +#define MISC_REGISTERS_GPIO_1 1 +#define MISC_REGISTERS_GPIO_2 2 +#define MISC_REGISTERS_GPIO_3 3 +#define MISC_REGISTERS_GPIO_CLR_POS 16 +#define MISC_REGISTERS_GPIO_FLOAT (0xffL<<24) +#define MISC_REGISTERS_GPIO_FLOAT_POS 24 +#define MISC_REGISTERS_GPIO_INPUT_HI_Z 2 +#define MISC_REGISTERS_GPIO_OUTPUT_HIGH 1 +#define MISC_REGISTERS_GPIO_OUTPUT_LOW 0 +#define MISC_REGISTERS_GPIO_PORT_SHIFT 4 +#define MISC_REGISTERS_GPIO_SET_POS 8 #define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588 #define MISC_REGISTERS_RESET_REG_1_SET 0x584 #define MISC_REGISTERS_RESET_REG_2_CLEAR 0x598 @@ -3891,6 +4059,25 @@ #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW (0x1<<4) #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8) #define MISC_REGISTERS_RESET_REG_3_SET 0x5a4 +#define MISC_REGISTERS_SPIO_4 4 +#define MISC_REGISTERS_SPIO_5 5 +#define MISC_REGISTERS_SPIO_7 7 +#define MISC_REGISTERS_SPIO_CLR_POS 16 +#define MISC_REGISTERS_SPIO_FLOAT (0xffL<<24) +#define GRC_MISC_REGISTERS_SPIO_FLOAT7 0x80000000 +#define GRC_MISC_REGISTERS_SPIO_FLOAT6 0x40000000 +#define GRC_MISC_REGISTERS_SPIO_FLOAT5 0x20000000 +#define GRC_MISC_REGISTERS_SPIO_FLOAT4 0x10000000 +#define MISC_REGISTERS_SPIO_FLOAT_POS 24 +#define MISC_REGISTERS_SPIO_INPUT_HI_Z 2 +#define MISC_REGISTERS_SPIO_INT_OLD_SET_POS 16 +#define MISC_REGISTERS_SPIO_OUTPUT_HIGH 1 +#define MISC_REGISTERS_SPIO_OUTPUT_LOW 0 +#define MISC_REGISTERS_SPIO_SET_POS 8 +#define HW_LOCK_MAX_RESOURCE_VALUE 31 +#define HW_LOCK_RESOURCE_8072_MDIO 0 +#define HW_LOCK_RESOURCE_GPIO 1 +#define HW_LOCK_RESOURCE_SPIO 2 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (1<<18) #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT (1<<31) #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT (1<<9) @@ -3918,6 +4105,7 @@ #define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT (1<<3) #define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR (1<<2) #define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR (1<<22) +#define AEU_INPUTS_ATTN_BITS_SPIO5 (1<<15) #define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT (1<<27) #define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT (1<<5) #define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT (1<<25) @@ -4206,6 +4394,9 @@ #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010 #define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15 #define MDIO_REG_BANK_GP_STATUS 0x8120 @@ -4362,11 +4553,13 @@ #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001 +#define EXT_PHY_AUTO_NEG_DEVAD 0x7 #define EXT_PHY_OPT_PMA_PMD_DEVAD 0x1 #define EXT_PHY_OPT_WIS_DEVAD 0x2 #define EXT_PHY_OPT_PCS_DEVAD 0x3 #define EXT_PHY_OPT_PHY_XS_DEVAD 0x4 #define EXT_PHY_OPT_CNTL 0x0 +#define EXT_PHY_OPT_CNTL2 0x7 #define EXT_PHY_OPT_PMD_RX_SD 0xa #define EXT_PHY_OPT_PMD_MISC_CNTL 0xca0a #define EXT_PHY_OPT_PHY_IDENTIFIER 0xc800 @@ -4378,11 +4571,24 @@ #define EXT_PHY_OPT_LASI_STATUS 0x9005 #define EXT_PHY_OPT_PCS_STATUS 0x0020 #define EXT_PHY_OPT_XGXS_LANE_STATUS 0x0018 +#define EXT_PHY_OPT_AN_LINK_STATUS 0x8304 +#define EXT_PHY_OPT_AN_CL37_CL73 0x8370 +#define EXT_PHY_OPT_AN_CL37_FD 0xffe4 +#define EXT_PHY_OPT_AN_CL37_AN 0xffe0 +#define EXT_PHY_OPT_AN_ADV 0x11 #define EXT_PHY_KR_PMA_PMD_DEVAD 0x1 #define EXT_PHY_KR_PCS_DEVAD 0x3 #define EXT_PHY_KR_AUTO_NEG_DEVAD 0x7 #define EXT_PHY_KR_CTRL 0x0000 +#define EXT_PHY_KR_STATUS 0x0001 +#define EXT_PHY_KR_AUTO_NEG_COMPLETE 0x0020 +#define EXT_PHY_KR_AUTO_NEG_ADVERT 0x0010 +#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE 0x0400 +#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_ASYMMETRIC 0x0800 +#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_BOTH 0x0C00 +#define EXT_PHY_KR_AUTO_NEG_ADVERT_PAUSE_MASK 0x0C00 +#define EXT_PHY_KR_LP_AUTO_NEG 0x0013 #define EXT_PHY_KR_CTRL2 0x0007 #define EXT_PHY_KR_PCS_STATUS 0x0020 #define EXT_PHY_KR_PMD_CTRL 0x0096 @@ -4391,4 +4597,8 @@ #define EXT_PHY_KR_MISC_CTRL1 0xca85 #define EXT_PHY_KR_GEN_CTRL 0xca10 #define EXT_PHY_KR_ROM_CODE 0xca19 +#define EXT_PHY_KR_ROM_RESET_INTERNAL_MP 0x0188 +#define EXT_PHY_KR_ROM_MICRO_RESET 0x018a + +#define EXT_PHY_SFX7101_XGXS_TEST1 0xc00a -- cgit v1.2.3-70-g09d2 From 49d66772112f40554ba18d037e0601ac3da0bf79 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:53:13 -0800 Subject: [BNX2X]: Correct RX filtering and MC configuration The configuration of RX filtering needed the following corrections: Drop flags need to be set per Rx queue. Have to tell the microcode to collect drop stats, and properly wait for them to complete when going down. Sometimes we failed to detect proper completion due to a logical error in the wait loop. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 165 +++++++++++++++++++++++++++++----------------------- drivers/net/bnx2x.h | 5 +- 2 files changed, 92 insertions(+), 78 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 5cd785064ba..103d3e0f24b 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -298,8 +298,7 @@ static void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32) static int bnx2x_mc_assert(struct bnx2x *bp) { - int i, j; - int rc = 0; + int i, j, rc = 0; char last_idx; const char storm[] = {"XTCU"}; const u32 intmem_base[] = { @@ -313,8 +312,9 @@ static int bnx2x_mc_assert(struct bnx2x *bp) for (i = 0; i < 4; i++) { last_idx = REG_RD8(bp, XSTORM_ASSERT_LIST_INDEX_OFFSET + intmem_base[i]); - BNX2X_ERR("DATA %cSTORM_ASSERT_LIST_INDEX 0x%x\n", - storm[i], last_idx); + if (last_idx) + BNX2X_LOG("DATA %cSTORM_ASSERT_LIST_INDEX 0x%x\n", + storm[i], last_idx); /* print the asserts */ for (j = 0; j < STROM_ASSERT_ARRAY_SIZE; j++) { @@ -330,7 +330,7 @@ static int bnx2x_mc_assert(struct bnx2x *bp) intmem_base[i]); if (row0 != COMMON_ASM_INVALID_ASSERT_OPCODE) { - BNX2X_ERR("DATA %cSTORM_ASSERT_INDEX 0x%x =" + BNX2X_LOG("DATA %cSTORM_ASSERT_INDEX 0x%x =" " 0x%08x 0x%08x 0x%08x 0x%08x\n", storm[i], j, row3, row2, row1, row0); rc++; @@ -349,21 +349,22 @@ static void bnx2x_fw_dump(struct bnx2x *bp) int word; mark = REG_RD(bp, MCP_REG_MCPR_SCRATCH + 0xf104); - printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n", mark); + mark = ((mark + 0x3) & ~0x3); + printk(KERN_ERR PFX "begin fw dump (mark 0x%x)\n" KERN_ERR, mark); for (offset = mark - 0x08000000; offset <= 0xF900; offset += 0x8*4) { for (word = 0; word < 8; word++) data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH + offset + 4*word)); data[8] = 0x0; - printk(KERN_ERR PFX "%s", (char *)data); + printk(KERN_CONT "%s", (char *)data); } for (offset = 0xF108; offset <= mark - 0x08000000; offset += 0x8*4) { for (word = 0; word < 8; word++) data[word] = htonl(REG_RD(bp, MCP_REG_MCPR_SCRATCH + offset + 4*word)); data[8] = 0x0; - printk(KERN_ERR PFX "%s", (char *)data); + printk(KERN_CONT "%s", (char *)data); } printk("\n" KERN_ERR PFX "end of fw dump\n"); } @@ -428,10 +429,10 @@ static void bnx2x_panic_dump(struct bnx2x *bp) } } - BNX2X_ERR("def_c_idx(%u) def_u_idx(%u) def_t_idx(%u)" - " def_x_idx(%u) def_att_idx(%u) attn_state(%u)" + BNX2X_ERR("def_c_idx(%u) def_u_idx(%u) def_x_idx(%u)" + " def_t_idx(%u) def_att_idx(%u) attn_state(%u)" " spq_prod_idx(%u)\n", - bp->def_c_idx, bp->def_u_idx, bp->def_t_idx, bp->def_x_idx, + bp->def_c_idx, bp->def_u_idx, bp->def_x_idx, bp->def_t_idx, bp->def_att_idx, bp->attn_state, bp->spq_prod_idx); @@ -789,20 +790,20 @@ static void bnx2x_sp_event(struct bnx2x_fastpath *fp, fp->state = BNX2X_FP_STATE_HALTED; break; - case (RAMROD_CMD_ID_ETH_PORT_DEL | BNX2X_STATE_CLOSING_WAIT4_DELETE): - DP(NETIF_MSG_IFDOWN, "got delete ramrod\n"); - bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD; - break; - case (RAMROD_CMD_ID_ETH_CFC_DEL | BNX2X_STATE_CLOSING_WAIT4_HALT): - DP(NETIF_MSG_IFDOWN, "got delete ramrod for MULTI[%d]\n", cid); - bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_DELETED; + DP(NETIF_MSG_IFDOWN, "got delete ramrod for MULTI[%d]\n", + cid); + bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_CLOSED; break; case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_OPEN): DP(NETIF_MSG_IFUP, "got set mac ramrod\n"); break; + case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_CLOSING_WAIT4_HALT): + DP(NETIF_MSG_IFUP, "got (un)set mac ramrod\n"); + break; + default: BNX2X_ERR("unexpected ramrod (%d) state is %x\n", command, bp->state); @@ -5236,6 +5237,9 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, atten_status_block); def_sb->atten_status_block.status_block_id = id; + bp->def_att_idx = 0; + bp->attn_state = 0; + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); @@ -5270,6 +5274,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, u_def_status_block); def_sb->u_def_status_block.status_block_id = id; + bp->def_u_idx = 0; + REG_WR(bp, BAR_USTRORM_INTMEM + USTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section)); REG_WR(bp, BAR_USTRORM_INTMEM + @@ -5287,6 +5293,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, c_def_status_block); def_sb->c_def_status_block.status_block_id = id; + bp->def_c_idx = 0; + REG_WR(bp, BAR_CSTRORM_INTMEM + CSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section)); REG_WR(bp, BAR_CSTRORM_INTMEM + @@ -5304,6 +5312,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, t_def_status_block); def_sb->t_def_status_block.status_block_id = id; + bp->def_t_idx = 0; + REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section)); REG_WR(bp, BAR_TSTRORM_INTMEM + @@ -5321,6 +5331,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, x_def_status_block); def_sb->x_def_status_block.status_block_id = id; + bp->def_x_idx = 0; + REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_DEF_SB_HOST_SB_ADDR_OFFSET(port), U64_LO(section)); REG_WR(bp, BAR_XSTRORM_INTMEM + @@ -5333,6 +5345,8 @@ static void bnx2x_init_def_sb(struct bnx2x *bp, REG_WR16(bp, BAR_XSTRORM_INTMEM + XSTORM_DEF_SB_HC_DISABLE_OFFSET(port, index), 0x1); + bp->stat_pending = 0; + bnx2x_ack_sb(bp, id, CSTORM_ID, 0, IGU_INT_ENABLE, 0); } @@ -5476,7 +5490,6 @@ static void bnx2x_init_sp_ring(struct bnx2x *bp) bp->spq_left = MAX_SPQ_PENDING; bp->spq_prod_idx = 0; - bp->dsb_sp_prod_idx = 0; bp->dsb_sp_prod = BNX2X_SP_DSB_INDEX; bp->spq_prod_bd = bp->spq; bp->spq_last_bd = bp->spq_prod_bd + MAX_SP_DESC_CNT; @@ -5553,6 +5566,42 @@ static void bnx2x_init_ind_table(struct bnx2x *bp) REG_WR(bp, PRS_REG_A_PRSU_20, 0xf); } +static void bnx2x_set_client_config(struct bnx2x *bp) +{ +#ifdef BCM_VLAN + int mode = bp->rx_mode; +#endif + int i, port = bp->port; + struct tstorm_eth_client_config tstorm_client = {0}; + + tstorm_client.mtu = bp->dev->mtu; + tstorm_client.statistics_counter_id = 0; + tstorm_client.config_flags = + TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE; +#ifdef BCM_VLAN + if (mode && bp->vlgrp) { + tstorm_client.config_flags |= + TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE; + DP(NETIF_MSG_IFUP, "vlan removal enabled\n"); + } +#endif + if (mode != BNX2X_RX_MODE_PROMISC) + tstorm_client.drop_flags = + TSTORM_ETH_CLIENT_CONFIG_DROP_MAC_ERR; + + for_each_queue(bp, i) { + REG_WR(bp, BAR_TSTRORM_INTMEM + + TSTORM_CLIENT_CONFIG_OFFSET(port, i), + ((u32 *)&tstorm_client)[0]); + REG_WR(bp, BAR_TSTRORM_INTMEM + + TSTORM_CLIENT_CONFIG_OFFSET(port, i) + 4, + ((u32 *)&tstorm_client)[1]); + } + +/* DP(NETIF_MSG_IFUP, "tstorm_client: 0x%08x 0x%08x\n", + ((u32 *)&tstorm_client)[0], ((u32 *)&tstorm_client)[1]); */ +} + static void bnx2x_set_storm_rx_mode(struct bnx2x *bp) { int mode = bp->rx_mode; @@ -5592,41 +5641,9 @@ static void bnx2x_set_storm_rx_mode(struct bnx2x *bp) /* DP(NETIF_MSG_IFUP, "tstorm_mac_filter[%d]: 0x%08x\n", i, ((u32 *)&tstorm_mac_filter)[i]); */ } -} -static void bnx2x_set_client_config(struct bnx2x *bp, int client_id) -{ -#ifdef BCM_VLAN - int mode = bp->rx_mode; -#endif - int port = bp->port; - struct tstorm_eth_client_config tstorm_client = {0}; - - tstorm_client.mtu = bp->dev->mtu; - tstorm_client.statistics_counter_id = 0; - tstorm_client.config_flags = - TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE; -#ifdef BCM_VLAN - if (mode && bp->vlgrp) { - tstorm_client.config_flags |= - TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE; - DP(NETIF_MSG_IFUP, "vlan removal enabled\n"); - } -#endif - tstorm_client.drop_flags = (TSTORM_ETH_CLIENT_CONFIG_DROP_IP_CS_ERR | - TSTORM_ETH_CLIENT_CONFIG_DROP_TCP_CS_ERR | - TSTORM_ETH_CLIENT_CONFIG_DROP_UDP_CS_ERR | - TSTORM_ETH_CLIENT_CONFIG_DROP_MAC_ERR); - - REG_WR(bp, BAR_TSTRORM_INTMEM + - TSTORM_CLIENT_CONFIG_OFFSET(port, client_id), - ((u32 *)&tstorm_client)[0]); - REG_WR(bp, BAR_TSTRORM_INTMEM + - TSTORM_CLIENT_CONFIG_OFFSET(port, client_id) + 4, - ((u32 *)&tstorm_client)[1]); - -/* DP(NETIF_MSG_IFUP, "tstorm_client: 0x%08x 0x%08x\n", - ((u32 *)&tstorm_client)[0], ((u32 *)&tstorm_client)[1]); */ + if (mode != BNX2X_RX_MODE_NONE) + bnx2x_set_client_config(bp); } static void bnx2x_init_internal(struct bnx2x *bp) @@ -5634,7 +5651,6 @@ static void bnx2x_init_internal(struct bnx2x *bp) int port = bp->port; struct tstorm_eth_function_common_config tstorm_config = {0}; struct stats_indication_flags stats_flags = {0}; - int i; if (is_multi(bp)) { tstorm_config.config_flags = MULTI_FLAGS; @@ -5651,10 +5667,6 @@ static void bnx2x_init_internal(struct bnx2x *bp) bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx until link is up */ bnx2x_set_storm_rx_mode(bp); - for_each_queue(bp, i) - bnx2x_set_client_config(bp, i); - - stats_flags.collect_eth = cpu_to_le32(1); REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_STATS_FLAGS_OFFSET(port), @@ -6961,7 +6973,7 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx, mb(); /* state is changed by bnx2x_sp_event()*/ - if (*state_p != state) + if (*state_p == state) return 0; timeout--; @@ -6970,9 +6982,10 @@ static int bnx2x_wait_ramrod(struct bnx2x *bp, int state, int idx, } /* timeout! */ - BNX2X_ERR("timeout waiting for ramrod %d on %d\n", state, idx); - return -EBUSY; + BNX2X_ERR("timeout %s for state %x on IDX [%d]\n", + poll ? "polling" : "waiting", state, idx); + return -EBUSY; } static int bnx2x_setup_leading(struct bnx2x *bp) @@ -7239,7 +7252,7 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index) /* delete cfc entry */ bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CFC_DEL, index, 0, 0, 1); - return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_DELETED, index, + return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_CLOSED, index, &(bp->fp[index].state), 1); } @@ -7247,7 +7260,7 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index) static void bnx2x_stop_leading(struct bnx2x *bp) { - + u16 dsb_sp_prod_idx; /* if the other port is handling traffic, this can take a lot of time */ int timeout = 500; @@ -7262,23 +7275,29 @@ static void bnx2x_stop_leading(struct bnx2x *bp) &(bp->fp[0].state), 1)) return; - bp->dsb_sp_prod_idx = *bp->dsb_sp_prod; + dsb_sp_prod_idx = *bp->dsb_sp_prod; /* Send CFC_DELETE ramrod */ bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_PORT_DEL, 0, 0, 0, 1); - /* - Wait for completion. + /* Wait for completion to arrive on default status block we are going to reset the chip anyway so there is not much to do if this times out */ - while (bp->dsb_sp_prod_idx == *bp->dsb_sp_prod && timeout) { - timeout--; - msleep(1); + while ((dsb_sp_prod_idx == *bp->dsb_sp_prod) && timeout) { + timeout--; + msleep(1); } - + if (!timeout) { + DP(NETIF_MSG_IFDOWN, "timeout polling for completion " + "dsb_sp_prod 0x%x != dsb_sp_prod_idx 0x%x\n", + *bp->dsb_sp_prod, dsb_sp_prod_idx); + } + bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD; + bp->fp[0].state = BNX2X_FP_STATE_CLOSED; } + static int bnx2x_nic_unload(struct bnx2x *bp, int fre_irq) { u32 reset_code = 0; @@ -8968,9 +8987,7 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state) * net_device service functions */ -/* Called with rtnl_lock from vlan functions and also netif_tx_lock - * from set_multicast. - */ +/* called with netif_tx_lock from set_multicast */ static void bnx2x_set_rx_mode(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); @@ -9496,7 +9513,7 @@ static void bnx2x_vlan_rx_register(struct net_device *dev, bp->vlgrp = vlgrp; if (netif_running(dev)) - bnx2x_set_rx_mode(dev); + bnx2x_set_client_config(bp); } #endif diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index dc423e58dad..d0e5ab1af44 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -1,6 +1,6 @@ /* bnx2x.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -431,8 +431,6 @@ struct bnx2x_fastpath { #define BNX2X_FP_STATE_OPEN 0xa0000 #define BNX2X_FP_STATE_HALTING 0xb0000 #define BNX2X_FP_STATE_HALTED 0xc0000 -#define BNX2X_FP_STATE_DELETED 0xd0000 -#define BNX2X_FP_STATE_CLOSE_IRQ 0xe0000 int index; @@ -513,7 +511,6 @@ struct bnx2x { struct eth_spe *spq; dma_addr_t spq_mapping; u16 spq_prod_idx; - u16 dsb_sp_prod_idx; struct eth_spe *spq_prod_bd; struct eth_spe *spq_last_bd; u16 *dsb_sp_prod; -- cgit v1.2.3-70-g09d2 From 0e39e645b3e83873d59b865df2b671c822e2182c Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:54:03 -0800 Subject: [BNX2X]: correct statistics Errors were summed improperly, some stats were missing. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 164 ++++++++++++++++++++++++++-------------------------- drivers/net/bnx2x.h | 4 +- 2 files changed, 83 insertions(+), 85 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 103d3e0f24b..a35feee513d 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -4972,39 +4972,37 @@ static void bnx2x_update_net_stats(struct bnx2x *bp) nstats->rx_bytes = bnx2x_hilo(&estats->total_bytes_received_hi); - nstats->tx_bytes = - bnx2x_hilo(&estats->total_bytes_transmitted_hi); + nstats->tx_bytes = bnx2x_hilo(&estats->total_bytes_transmitted_hi); - nstats->rx_dropped = estats->checksum_discard + - estats->mac_discard; + nstats->rx_dropped = estats->checksum_discard + estats->mac_discard; nstats->tx_dropped = 0; nstats->multicast = bnx2x_hilo(&estats->total_multicast_packets_transmitted_hi); - nstats->collisions = - estats->single_collision_transmit_frames + - estats->multiple_collision_transmit_frames + - estats->late_collision_frames + - estats->excessive_collision_frames; + nstats->collisions = estats->single_collision_transmit_frames + + estats->multiple_collision_transmit_frames + + estats->late_collision_frames + + estats->excessive_collision_frames; nstats->rx_length_errors = estats->runt_packets_received + estats->jabber_packets_received; - nstats->rx_over_errors = estats->no_buff_discard; + nstats->rx_over_errors = estats->brb_discard + + estats->brb_truncate_discard; nstats->rx_crc_errors = estats->crc_receive_errors; nstats->rx_frame_errors = estats->alignment_errors; - nstats->rx_fifo_errors = estats->brb_discard + - estats->brb_truncate_discard; + nstats->rx_fifo_errors = estats->no_buff_discard; nstats->rx_missed_errors = estats->xxoverflow_discard; nstats->rx_errors = nstats->rx_length_errors + nstats->rx_over_errors + nstats->rx_crc_errors + nstats->rx_frame_errors + - nstats->rx_fifo_errors; + nstats->rx_fifo_errors + + nstats->rx_missed_errors; nstats->tx_aborted_errors = estats->late_collision_frames + - estats->excessive_collision_frames; + estats->excessive_collision_frames; nstats->tx_carrier_errors = estats->false_carrier_detections; nstats->tx_fifo_errors = 0; nstats->tx_heartbeat_errors = 0; @@ -8755,81 +8753,87 @@ static void bnx2x_self_test(struct net_device *dev, static struct { char string[ETH_GSTRING_LEN]; } bnx2x_stats_str_arr[BNX2X_NUM_STATS] = { - { "rx_bytes"}, /* 0 */ - { "rx_error_bytes"}, /* 1 */ - { "tx_bytes"}, /* 2 */ - { "tx_error_bytes"}, /* 3 */ - { "rx_ucast_packets"}, /* 4 */ - { "rx_mcast_packets"}, /* 5 */ - { "rx_bcast_packets"}, /* 6 */ - { "tx_ucast_packets"}, /* 7 */ - { "tx_mcast_packets"}, /* 8 */ - { "tx_bcast_packets"}, /* 9 */ - { "tx_mac_errors"}, /* 10 */ - { "tx_carrier_errors"}, /* 11 */ - { "rx_crc_errors"}, /* 12 */ - { "rx_align_errors"}, /* 13 */ - { "tx_single_collisions"}, /* 14 */ - { "tx_multi_collisions"}, /* 15 */ - { "tx_deferred"}, /* 16 */ - { "tx_excess_collisions"}, /* 17 */ - { "tx_late_collisions"}, /* 18 */ - { "tx_total_collisions"}, /* 19 */ - { "rx_fragments"}, /* 20 */ - { "rx_jabbers"}, /* 21 */ - { "rx_undersize_packets"}, /* 22 */ - { "rx_oversize_packets"}, /* 23 */ - { "rx_xon_frames"}, /* 24 */ - { "rx_xoff_frames"}, /* 25 */ - { "tx_xon_frames"}, /* 26 */ - { "tx_xoff_frames"}, /* 27 */ - { "rx_mac_ctrl_frames"}, /* 28 */ - { "rx_filtered_packets"}, /* 29 */ - { "rx_discards"}, /* 30 */ + { "rx_bytes"}, + { "rx_error_bytes"}, + { "tx_bytes"}, + { "tx_error_bytes"}, + { "rx_ucast_packets"}, + { "rx_mcast_packets"}, + { "rx_bcast_packets"}, + { "tx_ucast_packets"}, + { "tx_mcast_packets"}, + { "tx_bcast_packets"}, + { "tx_mac_errors"}, /* 10 */ + { "tx_carrier_errors"}, + { "rx_crc_errors"}, + { "rx_align_errors"}, + { "tx_single_collisions"}, + { "tx_multi_collisions"}, + { "tx_deferred"}, + { "tx_excess_collisions"}, + { "tx_late_collisions"}, + { "tx_total_collisions"}, + { "rx_fragments"}, /* 20 */ + { "rx_jabbers"}, + { "rx_undersize_packets"}, + { "rx_oversize_packets"}, + { "rx_xon_frames"}, + { "rx_xoff_frames"}, + { "tx_xon_frames"}, + { "tx_xoff_frames"}, + { "rx_mac_ctrl_frames"}, + { "rx_filtered_packets"}, + { "rx_discards"}, /* 30 */ + { "brb_discard"}, + { "brb_truncate"}, + { "xxoverflow"} }; #define STATS_OFFSET32(offset_name) \ (offsetof(struct bnx2x_eth_stats, offset_name) / 4) static unsigned long bnx2x_stats_offset_arr[BNX2X_NUM_STATS] = { - STATS_OFFSET32(total_bytes_received_hi), /* 0 */ - STATS_OFFSET32(stat_IfHCInBadOctets_hi), /* 1 */ - STATS_OFFSET32(total_bytes_transmitted_hi), /* 2 */ - STATS_OFFSET32(stat_IfHCOutBadOctets_hi), /* 3 */ - STATS_OFFSET32(total_unicast_packets_received_hi), /* 4 */ - STATS_OFFSET32(total_multicast_packets_received_hi), /* 5 */ - STATS_OFFSET32(total_broadcast_packets_received_hi), /* 6 */ - STATS_OFFSET32(total_unicast_packets_transmitted_hi), /* 7 */ - STATS_OFFSET32(total_multicast_packets_transmitted_hi), /* 8 */ - STATS_OFFSET32(total_broadcast_packets_transmitted_hi), /* 9 */ - STATS_OFFSET32(stat_Dot3statsInternalMacTransmitErrors), /* 10 */ - STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors), /* 11 */ - STATS_OFFSET32(crc_receive_errors), /* 12 */ - STATS_OFFSET32(alignment_errors), /* 13 */ - STATS_OFFSET32(single_collision_transmit_frames), /* 14 */ - STATS_OFFSET32(multiple_collision_transmit_frames), /* 15 */ - STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions), /* 16 */ - STATS_OFFSET32(excessive_collision_frames), /* 17 */ - STATS_OFFSET32(late_collision_frames), /* 18 */ - STATS_OFFSET32(number_of_bugs_found_in_stats_spec), /* 19 */ - STATS_OFFSET32(runt_packets_received), /* 20 */ - STATS_OFFSET32(jabber_packets_received), /* 21 */ - STATS_OFFSET32(error_runt_packets_received), /* 22 */ - STATS_OFFSET32(error_jabber_packets_received), /* 23 */ - STATS_OFFSET32(pause_xon_frames_received), /* 24 */ - STATS_OFFSET32(pause_xoff_frames_received), /* 25 */ - STATS_OFFSET32(pause_xon_frames_transmitted), /* 26 */ - STATS_OFFSET32(pause_xoff_frames_transmitted), /* 27 */ - STATS_OFFSET32(control_frames_received), /* 28 */ - STATS_OFFSET32(mac_filter_discard), /* 29 */ - STATS_OFFSET32(no_buff_discard), /* 30 */ + STATS_OFFSET32(total_bytes_received_hi), + STATS_OFFSET32(stat_IfHCInBadOctets_hi), + STATS_OFFSET32(total_bytes_transmitted_hi), + STATS_OFFSET32(stat_IfHCOutBadOctets_hi), + STATS_OFFSET32(total_unicast_packets_received_hi), + STATS_OFFSET32(total_multicast_packets_received_hi), + STATS_OFFSET32(total_broadcast_packets_received_hi), + STATS_OFFSET32(total_unicast_packets_transmitted_hi), + STATS_OFFSET32(total_multicast_packets_transmitted_hi), + STATS_OFFSET32(total_broadcast_packets_transmitted_hi), + STATS_OFFSET32(stat_Dot3statsInternalMacTransmitErrors), /* 10 */ + STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors), + STATS_OFFSET32(crc_receive_errors), + STATS_OFFSET32(alignment_errors), + STATS_OFFSET32(single_collision_transmit_frames), + STATS_OFFSET32(multiple_collision_transmit_frames), + STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions), + STATS_OFFSET32(excessive_collision_frames), + STATS_OFFSET32(late_collision_frames), + STATS_OFFSET32(number_of_bugs_found_in_stats_spec), + STATS_OFFSET32(runt_packets_received), /* 20 */ + STATS_OFFSET32(jabber_packets_received), + STATS_OFFSET32(error_runt_packets_received), + STATS_OFFSET32(error_jabber_packets_received), + STATS_OFFSET32(pause_xon_frames_received), + STATS_OFFSET32(pause_xoff_frames_received), + STATS_OFFSET32(pause_xon_frames_transmitted), + STATS_OFFSET32(pause_xoff_frames_transmitted), + STATS_OFFSET32(control_frames_received), + STATS_OFFSET32(mac_filter_discard), + STATS_OFFSET32(no_buff_discard), /* 30 */ + STATS_OFFSET32(brb_discard), + STATS_OFFSET32(brb_truncate_discard), + STATS_OFFSET32(xxoverflow_discard) }; static u8 bnx2x_stats_len_arr[BNX2X_NUM_STATS] = { 8, 0, 8, 0, 8, 8, 8, 8, 8, 8, 4, 0, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, - 4, + 4, 4, 4, 4 }; static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf) @@ -9372,11 +9376,6 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } -static struct net_device_stats *bnx2x_get_stats(struct net_device *dev) -{ - return &dev->stats; -} - /* Called with rtnl_lock */ static int bnx2x_open(struct net_device *dev) { @@ -9784,7 +9783,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, dev->hard_start_xmit = bnx2x_start_xmit; dev->watchdog_timeo = TX_TIMEOUT; - dev->get_stats = bnx2x_get_stats; dev->ethtool_ops = &bnx2x_ethtool_ops; dev->open = bnx2x_open; dev->stop = bnx2x_close; diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index d0e5ab1af44..e2a36e850fc 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -854,8 +854,8 @@ struct bnx2x { #define MAX_SPQ_PENDING 8 -#define BNX2X_NUM_STATS 31 -#define BNX2X_NUM_TESTS 2 +#define BNX2X_NUM_STATS 34 +#define BNX2X_NUM_TESTS 1 #define DPM_TRIGER_TYPE 0x40 -- cgit v1.2.3-70-g09d2 From 615f8fd9c2ab475c420d5baa7def37c5cb0d50d3 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:54:54 -0800 Subject: [BNX2X]: fix MSI-X/INT#A errata Errata A0.158 workaround. Running in INT#A mode after running with MSI-X fails due to a PCI core bug. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index a35feee513d..6f987fa10a6 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -443,7 +443,7 @@ static void bnx2x_panic_dump(struct bnx2x *bp) DP(BNX2X_MSG_STATS, "stats_state - DISABLE\n"); } -static void bnx2x_enable_int(struct bnx2x *bp) +static void bnx2x_int_enable(struct bnx2x *bp) { int port = bp->port; u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; @@ -456,18 +456,26 @@ static void bnx2x_enable_int(struct bnx2x *bp) HC_CONFIG_0_REG_ATTN_BIT_EN_0); } else { val |= (HC_CONFIG_0_REG_SINGLE_ISR_EN_0 | + HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0 | HC_CONFIG_0_REG_INT_LINE_EN_0 | HC_CONFIG_0_REG_ATTN_BIT_EN_0); + + /* Errata A0.158 workaround */ + DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x) MSI-X %d\n", + val, port, addr, msix); + + REG_WR(bp, addr, val); + val &= ~HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0; } - DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x) msi %d\n", + DP(NETIF_MSG_INTR, "write %x to HC %d (addr 0x%x) MSI-X %d\n", val, port, addr, msix); REG_WR(bp, addr, val); } -static void bnx2x_disable_int(struct bnx2x *bp) +static void bnx2x_int_disable(struct bnx2x *bp) { int port = bp->port; u32 addr = port ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0; @@ -486,7 +494,7 @@ static void bnx2x_disable_int(struct bnx2x *bp) BNX2X_ERR("BUG! proper val not read from IGU!\n"); } -static void bnx2x_disable_int_sync(struct bnx2x *bp) +static void bnx2x_int_disable_sync(struct bnx2x *bp) { int msix = (bp->flags & USING_MSIX_FLAG) ? 1 : 0; @@ -494,7 +502,7 @@ static void bnx2x_disable_int_sync(struct bnx2x *bp) atomic_inc(&bp->intr_sem); /* prevent the HW from sending interrupts */ - bnx2x_disable_int(bp); + bnx2x_int_disable(bp); /* make sure all ISRs are done */ if (msix) { @@ -5710,7 +5718,7 @@ static void bnx2x_nic_init(struct bnx2x *bp) bnx2x_init_internal(bp); bnx2x_init_stats(bp); bnx2x_init_ind_table(bp); - bnx2x_enable_int(bp); + bnx2x_int_enable(bp); } @@ -7154,7 +7162,7 @@ stop_netif: napi_disable(&bnx2x_fp(bp, i, napi)); int_disable: - bnx2x_disable_int_sync(bp); + bnx2x_int_disable_sync(bp); bnx2x_free_skbs(bp); bnx2x_free_irq(bp); @@ -7174,7 +7182,7 @@ static void bnx2x_netif_stop(struct bnx2x *bp) bp->rx_mode = BNX2X_RX_MODE_NONE; bnx2x_set_storm_rx_mode(bp); - bnx2x_disable_int_sync(bp); + bnx2x_int_disable_sync(bp); bnx2x_link_reset(bp); for_each_queue(bp, i) -- cgit v1.2.3-70-g09d2 From 877e9aa4c31d8d1670b21824b819929435f46579 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:55:53 -0800 Subject: [BNX2X]: fix HW attentions and error handling Some of the HW attentions, used to indicate an error were not properly acked. This will cause the driver to endlessly receive interrupts when such an error happens. Had to break the code into smaller chunks because it got too nested. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 229 ++++++++++++++++++++++++++++++++++------------------ 1 file changed, 150 insertions(+), 79 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 6f987fa10a6..b99e3b72fac 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -4089,8 +4089,8 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted) u32 igu_addr = (IGU_ADDR_ATTN_BITS_SET + IGU_PORT_BASE * port) * 8; u32 aeu_addr = port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 : MISC_REG_AEU_MASK_ATTN_FUNC_0; - u32 nig_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 : - NIG_REG_MASK_INTERRUPT_PORT0; + u32 nig_int_mask_addr = port ? NIG_REG_MASK_INTERRUPT_PORT1 : + NIG_REG_MASK_INTERRUPT_PORT0; if (~bp->aeu_mask & (asserted & 0xff)) BNX2X_ERR("IGU ERROR\n"); @@ -4108,15 +4108,11 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted) if (asserted & ATTN_HARD_WIRED_MASK) { if (asserted & ATTN_NIG_FOR_FUNC) { - u32 nig_status_port; - u32 nig_int_addr = port ? - NIG_REG_STATUS_INTERRUPT_PORT1 : - NIG_REG_STATUS_INTERRUPT_PORT0; - bp->nig_mask = REG_RD(bp, nig_mask_addr); - REG_WR(bp, nig_mask_addr, 0); + /* save nig interrupt mask */ + bp->nig_mask = REG_RD(bp, nig_int_mask_addr); + REG_WR(bp, nig_int_mask_addr, 0); - nig_status_port = REG_RD(bp, nig_int_addr); bnx2x_link_update(bp); /* handle unicore attn? */ @@ -4169,15 +4165,132 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted) /* now set back the mask */ if (asserted & ATTN_NIG_FOR_FUNC) - REG_WR(bp, nig_mask_addr, bp->nig_mask); + REG_WR(bp, nig_int_mask_addr, bp->nig_mask); } -static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) +static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn) { int port = bp->port; - int index; + int reg_offset; + u32 val; + + if (attn & AEU_INPUTS_ATTN_BITS_SPIO5) { + + reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 : + MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0); + + val = REG_RD(bp, reg_offset); + val &= ~AEU_INPUTS_ATTN_BITS_SPIO5; + REG_WR(bp, reg_offset, val); + + BNX2X_ERR("SPIO5 hw attention\n"); + + switch (bp->board & SHARED_HW_CFG_BOARD_TYPE_MASK) { + case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G: + /* Fan failure attention */ + + /* The PHY reset is controled by GPIO 1 */ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW); + /* Low power mode is controled by GPIO 2 */ + bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_LOW); + /* mark the failure */ + bp->ext_phy_config &= + ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK; + bp->ext_phy_config |= + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE; + SHMEM_WR(bp, + dev_info.port_hw_config[port]. + external_phy_config, + bp->ext_phy_config); + /* log the failure */ + printk(KERN_ERR PFX "Fan Failure on Network" + " Controller %s has caused the driver to" + " shutdown the card to prevent permanent" + " damage. Please contact Dell Support for" + " assistance\n", bp->dev->name); + break; + + default: + break; + } + } +} + +static inline void bnx2x_attn_int_deasserted1(struct bnx2x *bp, u32 attn) +{ + u32 val; + + if (attn & BNX2X_DOORQ_ASSERT) { + + val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR); + BNX2X_ERR("DB hw attention 0x%x\n", val); + /* DORQ discard attention */ + if (val & 0x2) + BNX2X_ERR("FATAL error from DORQ\n"); + } +} + +static inline void bnx2x_attn_int_deasserted2(struct bnx2x *bp, u32 attn) +{ + u32 val; + + if (attn & AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) { + + val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR); + BNX2X_ERR("CFC hw attention 0x%x\n", val); + /* CFC error attention */ + if (val & 0x2) + BNX2X_ERR("FATAL error from CFC\n"); + } + + if (attn & AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) { + + val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0); + BNX2X_ERR("PXP hw attention 0x%x\n", val); + /* RQ_USDMDP_FIFO_OVERFLOW */ + if (val & 0x18000) + BNX2X_ERR("FATAL error from PXP\n"); + } +} + +static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn) +{ + if (attn & EVEREST_GEN_ATTN_IN_USE_MASK) { + + if (attn & BNX2X_MC_ASSERT_BITS) { + + BNX2X_ERR("MC assert!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_10, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_9, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_8, 0); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_7, 0); + bnx2x_panic(); + + } else if (attn & BNX2X_MCP_ASSERT) { + + BNX2X_ERR("MCP assert!\n"); + REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_11, 0); + bnx2x_mc_assert(bp); + + } else + BNX2X_ERR("Unknown HW assert! (attn 0x%x)\n", attn); + } + + if (attn & EVEREST_LATCHED_ATTN_IN_USE_MASK) { + + REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x7ff); + BNX2X_ERR("LATCHED attention 0x%x (masked)\n", attn); + } +} + +static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) +{ struct attn_route attn; struct attn_route group_mask; + int port = bp->port; + int index; u32 reg_addr; u32 val; @@ -4198,64 +4311,14 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) DP(NETIF_MSG_HW, "group[%d]: %llx\n", index, (unsigned long long)group_mask.sig[0]); - if (attn.sig[3] & group_mask.sig[3] & - EVEREST_GEN_ATTN_IN_USE_MASK) { - - if (attn.sig[3] & BNX2X_MC_ASSERT_BITS) { - - BNX2X_ERR("MC assert!\n"); - bnx2x_panic(); - - } else if (attn.sig[3] & BNX2X_MCP_ASSERT) { - - BNX2X_ERR("MCP assert!\n"); - REG_WR(bp, - MISC_REG_AEU_GENERAL_ATTN_11, 0); - bnx2x_mc_assert(bp); - - } else { - BNX2X_ERR("UNKOWEN HW ASSERT!\n"); - } - } - - if (attn.sig[1] & group_mask.sig[1] & - BNX2X_DOORQ_ASSERT) { - - val = REG_RD(bp, DORQ_REG_DORQ_INT_STS_CLR); - BNX2X_ERR("DB hw attention 0x%x\n", val); - /* DORQ discard attention */ - if (val & 0x2) - BNX2X_ERR("FATAL error from DORQ\n"); - } - - if (attn.sig[2] & group_mask.sig[2] & - AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT) { - - val = REG_RD(bp, CFC_REG_CFC_INT_STS_CLR); - BNX2X_ERR("CFC hw attention 0x%x\n", val); - /* CFC error attention */ - if (val & 0x2) - BNX2X_ERR("FATAL error from CFC\n"); - } - - if (attn.sig[2] & group_mask.sig[2] & - AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT) { - - val = REG_RD(bp, PXP_REG_PXP_INT_STS_CLR_0); - BNX2X_ERR("PXP hw attention 0x%x\n", val); - /* RQ_USDMDP_FIFO_OVERFLOW */ - if (val & 0x18000) - BNX2X_ERR("FATAL error from PXP\n"); - } - - if (attn.sig[3] & group_mask.sig[3] & - EVEREST_LATCHED_ATTN_IN_USE_MASK) { - - REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, - 0x7ff); - DP(NETIF_MSG_HW, "got latched bits 0x%x\n", - attn.sig[3]); - } + bnx2x_attn_int_deasserted3(bp, + attn.sig[3] & group_mask.sig[3]); + bnx2x_attn_int_deasserted1(bp, + attn.sig[1] & group_mask.sig[1]); + bnx2x_attn_int_deasserted2(bp, + attn.sig[2] & group_mask.sig[2]); + bnx2x_attn_int_deasserted0(bp, + attn.sig[0] & group_mask.sig[0]); if ((attn.sig[0] & group_mask.sig[0] & HW_INTERRUT_ASSERT_SET_0) || @@ -4263,7 +4326,15 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) HW_INTERRUT_ASSERT_SET_1) || (attn.sig[2] & group_mask.sig[2] & HW_INTERRUT_ASSERT_SET_2)) - BNX2X_ERR("FATAL HW block attention\n"); + BNX2X_ERR("FATAL HW block attention" + " set0 0x%x set1 0x%x" + " set2 0x%x\n", + (attn.sig[0] & group_mask.sig[0] & + HW_INTERRUT_ASSERT_SET_0), + (attn.sig[1] & group_mask.sig[1] & + HW_INTERRUT_ASSERT_SET_1), + (attn.sig[2] & group_mask.sig[2] & + HW_INTERRUT_ASSERT_SET_2)); if ((attn.sig[0] & group_mask.sig[0] & HW_PRTY_ASSERT_SET_0) || @@ -4271,7 +4342,7 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted) HW_PRTY_ASSERT_SET_1) || (attn.sig[2] & group_mask.sig[2] & HW_PRTY_ASSERT_SET_2)) - BNX2X_ERR("FATAL HW block parity attention\n"); + BNX2X_ERR("FATAL HW block parity attention\n"); } } @@ -4336,7 +4407,7 @@ static void bnx2x_sp_task(struct work_struct *work) /* Return here if interrupt is disabled */ if (unlikely(atomic_read(&bp->intr_sem) != 0)) { - DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n"); + DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n"); return; } @@ -4346,12 +4417,11 @@ static void bnx2x_sp_task(struct work_struct *work) DP(NETIF_MSG_INTR, "got a slowpath interrupt (updated %x)\n", status); - if (status & 0x1) { - /* HW attentions */ + /* HW attentions */ + if (status & 0x1) bnx2x_attn_int(bp); - } - /* CStorm events: query_stats, cfc delete ramrods */ + /* CStorm events: query_stats, port delete ramrod */ if (status & 0x2) bp->stat_pending = 0; @@ -4365,6 +4435,7 @@ static void bnx2x_sp_task(struct work_struct *work) IGU_INT_NOP, 1); bnx2x_ack_sb(bp, DEF_SB_ID, TSTORM_ID, le16_to_cpu(bp->def_t_idx), IGU_INT_ENABLE, 1); + } static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance) @@ -4374,11 +4445,11 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance) /* Return here if interrupt is disabled */ if (unlikely(atomic_read(&bp->intr_sem) != 0)) { - DP(NETIF_MSG_INTR, "called but intr_sem not 0, returning\n"); + DP(BNX2X_MSG_SP, "called but intr_sem not 0, returning\n"); return IRQ_HANDLED; } - bnx2x_ack_sb(bp, 16, XSTORM_ID, 0, IGU_INT_DISABLE, 0); + bnx2x_ack_sb(bp, DEF_SB_ID, XSTORM_ID, 0, IGU_INT_DISABLE, 0); #ifdef BNX2X_STOP_ON_ERROR if (unlikely(bp->panic)) -- cgit v1.2.3-70-g09d2 From 228241eb58ad13e7cf2ddd9c92eabb5c3055cf5c Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:56:57 -0800 Subject: [BNX2X]: fix slowpath races and locking Fixed locking between fastpath and slowpath operations. Corrected order of traffic disabling to prevent race when going down under traffic. - first have the microcode drop all incoming packets - then do the slowpath stuff - only then reset the MAC Got rid of in_reset_task. Remove_one() and friends would deference a null pointer if init_one failed. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 213 ++++++++++++++++++++++++++++------------------------ drivers/net/bnx2x.h | 3 - 2 files changed, 116 insertions(+), 100 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index b99e3b72fac..d21599cfeb8 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -6881,14 +6881,11 @@ static void bnx2x_free_msix_irqs(struct bnx2x *bp) "state(%x)\n", i, bp->msix_table[i + 1].vector, bnx2x_fp(bp, i, state)); - if (bnx2x_fp(bp, i, state) != BNX2X_FP_STATE_CLOSED) { - - free_irq(bp->msix_table[i + 1].vector, &bp->fp[i]); - bnx2x_fp(bp, i, state) = BNX2X_FP_STATE_CLOSED; - - } else - DP(NETIF_MSG_IFDOWN, "irq not freed\n"); + if (bnx2x_fp(bp, i, state) != BNX2X_FP_STATE_CLOSED) + BNX2X_ERR("IRQ of fp #%d being freed while " + "state != closed\n", i); + free_irq(bp->msix_table[i + 1].vector, &bp->fp[i]); } } @@ -6918,7 +6915,7 @@ static int bnx2x_enable_msix(struct bnx2x *bp) if (pci_enable_msix(bp->pdev, &bp->msix_table[0], bp->num_queues + 1)){ - BNX2X_ERR("failed to enable msix\n"); + BNX2X_LOG("failed to enable MSI-X\n"); return -1; } @@ -6935,8 +6932,6 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp) int i, rc; - DP(NETIF_MSG_IFUP, "about to request sp irq\n"); - rc = request_irq(bp->msix_table[0].vector, bnx2x_msix_sp_int, 0, bp->dev->name, bp->dev); @@ -6951,7 +6946,8 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp) bp->dev->name, &bp->fp[i]); if (rc) { - BNX2X_ERR("request fp #%d irq failed\n", i); + BNX2X_ERR("request fp #%d irq failed " + "rc %d\n", i, rc); bnx2x_free_msix_irqs(bp); return -EBUSY; } @@ -7084,12 +7080,13 @@ static int bnx2x_setup_multi(struct bnx2x *bp, int index) /* reset IGU state */ bnx2x_ack_sb(bp, index, CSTORM_ID, 0, IGU_INT_ENABLE, 0); + /* SETUP ramrod */ bp->fp[index].state = BNX2X_FP_STATE_OPENING; bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_CLIENT_SETUP, index, 0, index, 0); /* Wait for completion */ return bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_OPEN, index, - &(bp->fp[index].state), 1); + &(bp->fp[index].state), 0); } @@ -7099,8 +7096,8 @@ static void bnx2x_set_rx_mode(struct net_device *dev); static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) { - int rc; - int i = 0; + u32 load_code; + int i; bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD; @@ -7110,12 +7107,17 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) initialized, otherwise - not. */ if (!nomcp) { - rc = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ); - if (rc == FW_MSG_CODE_DRV_LOAD_REFUSED) { + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ); + if (!load_code) { + BNX2X_ERR("MCP response failure, unloading\n"); + return -EBUSY; + } + if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) { + BNX2X_ERR("MCP refused load request, unloading\n"); return -EBUSY; /* other port in diagnostic mode */ } } else { - rc = FW_MSG_CODE_DRV_LOAD_COMMON; + load_code = FW_MSG_CODE_DRV_LOAD_COMMON; } /* if we can't use msix we only need one fp, @@ -7153,13 +7155,13 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) if (bp->flags & USING_MSIX_FLAG) { if (bnx2x_req_msix_irqs(bp)) { pci_disable_msix(bp->pdev); - goto out_error; + goto load_error; } } else { if (bnx2x_req_irq(bp)) { BNX2X_ERR("IRQ request failed, aborting\n"); - goto out_error; + goto load_error; } } } @@ -7170,9 +7172,10 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) /* Initialize HW */ - if (bnx2x_function_init(bp, (rc == FW_MSG_CODE_DRV_LOAD_COMMON))) { + if (bnx2x_function_init(bp, + (load_code == FW_MSG_CODE_DRV_LOAD_COMMON))) { BNX2X_ERR("HW init failed, aborting\n"); - goto out_error; + goto load_error; } @@ -7184,11 +7187,10 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) /* Send LOAD_DONE command to MCP */ if (!nomcp) { - rc = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE); - DP(NETIF_MSG_IFUP, "rc = 0x%x\n", rc); - if (!rc) { + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE); + if (!load_code) { BNX2X_ERR("MCP response failure, unloading\n"); - goto int_disable; + goto load_int_disable; } } @@ -7200,11 +7202,11 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) napi_enable(&bnx2x_fp(bp, i, napi)); if (bnx2x_setup_leading(bp)) - goto stop_netif; + goto load_stop_netif; for_each_nondefault_queue(bp, i) if (bnx2x_setup_multi(bp, i)) - goto stop_netif; + goto load_stop_netif; bnx2x_set_mac_addr(bp); @@ -7228,42 +7230,24 @@ static int bnx2x_nic_load(struct bnx2x *bp, int req_irq) return 0; -stop_netif: +load_stop_netif: for_each_queue(bp, i) napi_disable(&bnx2x_fp(bp, i, napi)); -int_disable: +load_int_disable: bnx2x_int_disable_sync(bp); bnx2x_free_skbs(bp); bnx2x_free_irq(bp); -out_error: +load_error: bnx2x_free_mem(bp); /* TBD we really need to reset the chip if we want to recover from this */ - return rc; + return -EBUSY; } -static void bnx2x_netif_stop(struct bnx2x *bp) -{ - int i; - - bp->rx_mode = BNX2X_RX_MODE_NONE; - bnx2x_set_storm_rx_mode(bp); - - bnx2x_int_disable_sync(bp); - bnx2x_link_reset(bp); - - for_each_queue(bp, i) - napi_disable(&bnx2x_fp(bp, i, napi)); - - if (netif_running(bp->dev)) { - netif_tx_disable(bp->dev); - bp->dev->trans_start = jiffies; /* prevent tx timeout */ - } -} static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code) { @@ -7354,7 +7338,7 @@ static void bnx2x_stop_leading(struct bnx2x *bp) dsb_sp_prod_idx = *bp->dsb_sp_prod; - /* Send CFC_DELETE ramrod */ + /* Send PORT_DELETE ramrod */ bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_PORT_DEL, 0, 0, 0, 1); /* Wait for completion to arrive on default status block @@ -7375,35 +7359,48 @@ static void bnx2x_stop_leading(struct bnx2x *bp) } -static int bnx2x_nic_unload(struct bnx2x *bp, int fre_irq) +static int bnx2x_nic_unload(struct bnx2x *bp, int free_irq) { u32 reset_code = 0; - int rc; - int i; + int i, timeout; bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT; - /* Calling flush_scheduled_work() may deadlock because - * linkwatch_event() may be on the workqueue and it will try to get - * the rtnl_lock which we are holding. - */ + del_timer_sync(&bp->timer); - while (bp->in_reset_task) - msleep(1); + bp->rx_mode = BNX2X_RX_MODE_NONE; + bnx2x_set_storm_rx_mode(bp); - /* Delete the timer: do it before disabling interrupts, as it - may be still STAT_QUERY ramrod pending after stopping the timer */ - del_timer_sync(&bp->timer); + if (netif_running(bp->dev)) { + netif_tx_disable(bp->dev); + bp->dev->trans_start = jiffies; /* prevent tx timeout */ + } + + /* Wait until all fast path tasks complete */ + for_each_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + timeout = 1000; + while (bnx2x_has_work(fp) && (timeout--)) + msleep(1); + if (!timeout) + BNX2X_ERR("timeout waiting for queue[%d]\n", i); + } /* Wait until stat ramrod returns and all SP tasks complete */ - while (bp->stat_pending && (bp->spq_left != MAX_SPQ_PENDING)) + timeout = 1000; + while ((bp->stat_pending || (bp->spq_left != MAX_SPQ_PENDING)) && + (timeout--)) msleep(1); - /* Stop fast path, disable MAC, disable interrupts, disable napi */ - bnx2x_netif_stop(bp); + for_each_queue(bp, i) + napi_disable(&bnx2x_fp(bp, i, napi)); + /* Disable interrupts after Tx and Rx are disabled on stack level */ + bnx2x_int_disable_sync(bp); if (bp->flags & NO_WOL_FLAG) reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP; + else if (bp->wol) { u32 emac_base = bp->port ? GRCBASE_EMAC0 : GRCBASE_EMAC1; u8 *mac_addr = bp->dev->dev_addr; @@ -7420,28 +7417,37 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int fre_irq) EMAC_WR(EMAC_REG_EMAC_MAC_MATCH + 4, val); reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN; + } else reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; + /* Close multi and leading connections */ for_each_nondefault_queue(bp, i) if (bnx2x_stop_multi(bp, i)) - goto error; - + goto unload_error; bnx2x_stop_leading(bp); + if ((bp->state != BNX2X_STATE_CLOSING_WAIT4_UNLOAD) || + (bp->fp[0].state != BNX2X_FP_STATE_CLOSED)) { + DP(NETIF_MSG_IFDOWN, "failed to close leading properly!" + "state 0x%x fp[0].state 0x%x", + bp->state, bp->fp[0].state); + } + +unload_error: + bnx2x_link_reset(bp); -error: if (!nomcp) - rc = bnx2x_fw_command(bp, reset_code); + reset_code = bnx2x_fw_command(bp, reset_code); else - rc = FW_MSG_CODE_DRV_UNLOAD_COMMON; + reset_code = FW_MSG_CODE_DRV_UNLOAD_COMMON; /* Release IRQs */ - if (fre_irq) + if (free_irq) bnx2x_free_irq(bp); /* Reset the chip */ - bnx2x_reset_chip(bp, rc); + bnx2x_reset_chip(bp, reset_code); /* Report UNLOAD_DONE to MCP */ if (!nomcp) @@ -7452,8 +7458,7 @@ error: bnx2x_free_mem(bp); bp->state = BNX2X_STATE_CLOSED; - /* Set link down */ - bp->link_up = 0; + netif_carrier_off(bp->dev); return 0; @@ -9468,16 +9473,13 @@ static int bnx2x_open(struct net_device *dev) /* Called with rtnl_lock */ static int bnx2x_close(struct net_device *dev) { - int rc; struct bnx2x *bp = netdev_priv(dev); /* Unload the driver, release IRQs */ - rc = bnx2x_nic_unload(bp, 1); - if (rc) { - BNX2X_ERR("bnx2x_nic_unload failed: %d\n", rc); - return rc; - } - bnx2x_set_power_state(bp, PCI_D3hot); + bnx2x_nic_unload(bp, 1); + + if (!CHIP_REV_IS_SLOW(bp)) + bnx2x_set_power_state(bp, PCI_D3hot); return 0; } @@ -9620,14 +9622,18 @@ static void bnx2x_reset_task(struct work_struct *work) if (!netif_running(bp->dev)) return; - bp->in_reset_task = 1; + rtnl_lock(); - bnx2x_netif_stop(bp); + if (bp->state != BNX2X_STATE_OPEN) { + DP(NETIF_MSG_TX_ERR, "state is %x, returning\n", bp->state); + goto reset_task_exit; + } bnx2x_nic_unload(bp, 0); bnx2x_nic_load(bp, 0); - bp->in_reset_task = 0; +reset_task_exit: + rtnl_unlock(); } static int __devinit bnx2x_init_board(struct pci_dev *pdev, @@ -9708,8 +9714,6 @@ static int __devinit bnx2x_init_board(struct pci_dev *pdev, spin_lock_init(&bp->phy_lock); - bp->in_reset_task = 0; - INIT_WORK(&bp->reset_task, bnx2x_reset_task); INIT_WORK(&bp->sp_task, bnx2x_sp_task); @@ -9916,10 +9920,16 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, static void __devexit bnx2x_remove_one(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); - struct bnx2x *bp = netdev_priv(dev); + struct bnx2x *bp; + + if (!dev) { + /* we get here if init_one() fails */ + printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n"); + return; + } + + bp = netdev_priv(dev); - flush_scheduled_work(); - /*tasklet_kill(&bp->sp_task);*/ unregister_netdev(dev); if (bp->regview) @@ -9937,34 +9947,43 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev) static int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *dev = pci_get_drvdata(pdev); - struct bnx2x *bp = netdev_priv(dev); - int rc; + struct bnx2x *bp; + + if (!dev) + return 0; if (!netif_running(dev)) return 0; - rc = bnx2x_nic_unload(bp, 0); - if (!rc) - return rc; + bp = netdev_priv(dev); + + bnx2x_nic_unload(bp, 0); netif_device_detach(dev); - pci_save_state(pdev); + pci_save_state(pdev); bnx2x_set_power_state(bp, pci_choose_state(pdev, state)); + return 0; } static int bnx2x_resume(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); - struct bnx2x *bp = netdev_priv(dev); + struct bnx2x *bp; int rc; + if (!dev) { + printk(KERN_ERR PFX "BAD net device from bnx2x_init_one\n"); + return -ENODEV; + } + if (!netif_running(dev)) return 0; - pci_restore_state(pdev); + bp = netdev_priv(dev); + pci_restore_state(pdev); bnx2x_set_power_state(bp, PCI_D0); netif_device_attach(dev); diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index e2a36e850fc..6a86afbc752 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -545,8 +545,6 @@ struct bnx2x { spinlock_t phy_lock; struct work_struct reset_task; - u16 in_reset_task; - struct work_struct sp_task; struct timer_list timer; @@ -560,7 +558,6 @@ struct bnx2x { #define CHIP_ID(bp) (((bp)->chip_id) & 0xfffffff0) #define CHIP_NUM(bp) (((bp)->chip_id) & 0xffff0000) -#define CHIP_NUM_5710 0x57100000 #define CHIP_REV(bp) (((bp)->chip_id) & 0x0000f000) #define CHIP_REV_Ax 0x00000000 -- cgit v1.2.3-70-g09d2 From e8717a47266b1527e620ddf262613b9d010bbbe7 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:57:29 -0800 Subject: [BNX2X]: Prevent PCI queue overflow Limit traffic through an internal queue to prevent overflow. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x_init.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h index 04f93bff2ef..dcaecc53bdb 100644 --- a/drivers/net/bnx2x_init.h +++ b/drivers/net/bnx2x_init.h @@ -1,6 +1,6 @@ /* bnx2x_init.h: Broadcom Everest network driver. * - * Copyright (c) 2007 Broadcom Corporation + * Copyright (c) 2007-2008 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -409,7 +409,7 @@ static void bnx2x_init_pxp(struct bnx2x *bp) pci_read_config_word(bp->pdev, bp->pcie_cap + PCI_EXP_DEVCTL, (u16 *)&val); - DP(NETIF_MSG_HW, "read 0x%x from devctl\n", val); + DP(NETIF_MSG_HW, "read 0x%x from devctl\n", (u16)val); w_order = ((val & PCI_EXP_DEVCTL_PAYLOAD) >> 5); r_order = ((val & PCI_EXP_DEVCTL_READRQ) >> 12); @@ -472,10 +472,14 @@ static void bnx2x_init_pxp(struct bnx2x *bp) REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val); REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order); - REG_WR(bp, PXP2_REG_RQ_WR_MBS0 + 8, w_order); + REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order); REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order); - REG_WR(bp, PXP2_REG_RQ_RD_MBS0 + 8, r_order); + REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order); + if (r_order == MAX_RD_ORD) + REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00); + + REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order)); REG_WR(bp, PXP2_REG_WR_DMAE_TH, (128 << w_order)/16); } -- cgit v1.2.3-70-g09d2 From 96fc1784007bf194399759e9b7d9c836c7bbda2a Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:57:55 -0800 Subject: [BNX2X]: Fix Xmit bugs Several endianity corrections in start_xmit() Fixed TSO bug where packets were missing the TCP flags. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 12 +++++++----- drivers/net/bnx2x.h | 3 +++ 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index d21599cfeb8..2db0427b0c9 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -9269,7 +9269,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) /* for now NS flag is not used in Linux */ pbd->global_data = (len | - ((skb->protocol == ETH_P_8021Q) << + ((skb->protocol == ntohs(ETH_P_8021Q)) << ETH_TX_PARSE_BD_LLC_SNAP_EN_SHIFT)); pbd->ip_hlen = ip_hdrlen(skb) / 2; pbd->total_hlen = cpu_to_le16(len + pbd->ip_hlen); @@ -9278,7 +9278,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) tx_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_TCP_CSUM; - pbd->tcp_flags = htonl(tcp_flag_word(skb)) & 0xFFFF; + pbd->tcp_flags = pbd_tcp_flags(skb); pbd->total_hlen += cpu_to_le16(tcp_hdrlen(skb) / 2); pbd->tcp_pseudo_csum = swab16(th->check); @@ -9322,7 +9322,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) if (skb_shinfo(skb)->gso_size && (skb->len > (bp->dev->mtu + ETH_HLEN))) { - int hlen = 2 * le32_to_cpu(pbd->total_hlen); + int hlen = 2 * le16_to_cpu(pbd->total_hlen); DP(NETIF_MSG_TX_QUEUED, "TSO packet len %d hlen %d total len %d tso size %d\n", @@ -9439,9 +9439,11 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %u bd %d\n", nbd, bd_prod); - fp->hw_tx_prods->bds_prod += cpu_to_le16(nbd); + fp->hw_tx_prods->bds_prod = + cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + nbd); mb(); /* FW restriction: must not reorder writing nbd and packets */ - fp->hw_tx_prods->packets_prod += cpu_to_le32(1); + fp->hw_tx_prods->packets_prod = + cpu_to_le32(le32_to_cpu(fp->hw_tx_prods->packets_prod) + 1); DOORBELL(bp, fp_index, 0); mmiowb(); diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 6a86afbc752..4f0c0d31e7c 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -869,6 +869,9 @@ struct bnx2x { #define PCICFG_LINK_SPEED_SHIFT 16 #define BMAC_CONTROL_RX_ENABLE 2 + +#define pbd_tcp_flags(skb) (ntohl(tcp_flag_word(tcp_hdr(skb)))>>16 & 0xff) + /* stuff added to make the code fit 80Col */ #define TPA_TYPE_START ETH_FAST_PATH_RX_CQE_START_FLG -- cgit v1.2.3-70-g09d2 From 8d84a44096a34a5015fef8293fe1bf70068bfdd0 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:58:49 -0800 Subject: [BNX2X]: update version, remove CVS strings Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 2db0427b0c9..8af142ccf37 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -63,8 +63,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "0.40.15" -#define DRV_MODULE_RELDATE "$DateTime: 2007/11/15 07:28:37 $" +#define DRV_MODULE_VERSION "1.40.22" +#define DRV_MODULE_RELDATE "2007/11/27" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung. */ @@ -78,7 +78,6 @@ MODULE_AUTHOR("Eliezer Tamir "); MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_MODULE_VERSION); -MODULE_INFO(cvs_version, "$Revision: #404 $"); static int use_inta; static int poll; -- cgit v1.2.3-70-g09d2 From 4d9d2cb026c756318965e2d9874d4695d9ebd4f6 Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Thu, 28 Feb 2008 11:59:10 -0800 Subject: [BNX2X]: add bnx2x to MAINTAINERS Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 2333255417f..33d99dcac69 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -982,6 +982,12 @@ M: mchan@broadcom.com L: netdev@vger.kernel.org S: Supported +BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER +P: Eliezer Tamir +M: eliezert@broadcom.com +L: netdev@vger.kernel.org +S: Supported + BROADCOM TG3 GIGABIT ETHERNET DRIVER P: Michael Chan M: mchan@broadcom.com -- cgit v1.2.3-70-g09d2 From ed2b5b474e853fe2f9a9988f2871051291779d90 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 12:53:32 -0800 Subject: [APPLETALK]: Use proc_create() to setup ->proc_fops first As Davem mentioned in his recently patch (d9595a7b9c777d45a74774f1428c263a0a47f4c0) that the procfs visibility should occur after the ->proc_fops are setup. And also, Alexey provide proc_create() to make sure that ->proc_fops is setup before gluing PDE to main tree. We use proc_create(). Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/appletalk/atalk_proc.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/net/appletalk/atalk_proc.c b/net/appletalk/atalk_proc.c index 8e8dcfd532d..162199a2d74 100644 --- a/net/appletalk/atalk_proc.c +++ b/net/appletalk/atalk_proc.c @@ -283,25 +283,24 @@ int __init atalk_proc_init(void) goto out; atalk_proc_dir->owner = THIS_MODULE; - p = create_proc_entry("interface", S_IRUGO, atalk_proc_dir); + p = proc_create("interface", S_IRUGO, atalk_proc_dir, + &atalk_seq_interface_fops); if (!p) goto out_interface; - p->proc_fops = &atalk_seq_interface_fops; - p = create_proc_entry("route", S_IRUGO, atalk_proc_dir); + p = proc_create("route", S_IRUGO, atalk_proc_dir, + &atalk_seq_route_fops); if (!p) goto out_route; - p->proc_fops = &atalk_seq_route_fops; - p = create_proc_entry("socket", S_IRUGO, atalk_proc_dir); + p = proc_create("socket", S_IRUGO, atalk_proc_dir, + &atalk_seq_socket_fops); if (!p) goto out_socket; - p->proc_fops = &atalk_seq_socket_fops; - p = create_proc_entry("arp", S_IRUGO, atalk_proc_dir); + p = proc_create("arp", S_IRUGO, atalk_proc_dir, &atalk_seq_arp_fops); if (!p) goto out_arp; - p->proc_fops = &atalk_seq_arp_fops; rc = 0; out: -- cgit v1.2.3-70-g09d2 From 15efbe763978d7cc327d824d9e8f8f9e525dd40d Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Fri, 15 Feb 2008 09:53:59 -0500 Subject: [SCTP]: Clean up naming conventions of sctp protocol/address family registration I noticed while looking into some odd behavior in sctp, that the variable name sctp_pf_inet6_specific was used twice to represent two different pieces of data (its both a structure name and a pointer to that type of structure), which is confusing to say the least, and potentially dangerous depending on the variable scope. This patch cleans that up, and makes the protocol and address family registration names in SCTP more regular, increasing readability. Signed-off-by: Neil Horman Signed-off-by: Vlad Yasevich ipv6.c | 12 ++++++------ protocol.c | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) --- net/sctp/ipv6.c | 12 ++++++------ net/sctp/protocol.c | 12 ++++++------ 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index 4d7ec961ae1..87f940587d5 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -966,7 +966,7 @@ static struct inet6_protocol sctpv6_protocol = { .flags = INET6_PROTO_NOPOLICY | INET6_PROTO_FINAL, }; -static struct sctp_af sctp_ipv6_specific = { +static struct sctp_af sctp_af_inet6 = { .sa_family = AF_INET6, .sctp_xmit = sctp_v6_xmit, .setsockopt = ipv6_setsockopt, @@ -998,7 +998,7 @@ static struct sctp_af sctp_ipv6_specific = { #endif }; -static struct sctp_pf sctp_pf_inet6_specific = { +static struct sctp_pf sctp_pf_inet6 = { .event_msgname = sctp_inet6_event_msgname, .skb_msgname = sctp_inet6_skb_msgname, .af_supported = sctp_inet6_af_supported, @@ -1008,7 +1008,7 @@ static struct sctp_pf sctp_pf_inet6_specific = { .supported_addrs = sctp_inet6_supported_addrs, .create_accept_sk = sctp_v6_create_accept_sk, .addr_v4map = sctp_v6_addr_v4map, - .af = &sctp_ipv6_specific, + .af = &sctp_af_inet6, }; /* Initialize IPv6 support and register with socket layer. */ @@ -1017,10 +1017,10 @@ int sctp_v6_init(void) int rc; /* Register the SCTP specific PF_INET6 functions. */ - sctp_register_pf(&sctp_pf_inet6_specific, PF_INET6); + sctp_register_pf(&sctp_pf_inet6, PF_INET6); /* Register the SCTP specific AF_INET6 functions. */ - sctp_register_af(&sctp_ipv6_specific); + sctp_register_af(&sctp_af_inet6); rc = proto_register(&sctpv6_prot, 1); if (rc) @@ -1051,7 +1051,7 @@ void sctp_v6_exit(void) inet6_unregister_protosw(&sctpv6_seqpacket_protosw); inet6_unregister_protosw(&sctpv6_stream_protosw); proto_unregister(&sctpv6_prot); - list_del(&sctp_ipv6_specific.list); + list_del(&sctp_af_inet6.list); } /* Unregister with inet6 layer. */ diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 22a16571499..688546dccd8 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -832,7 +832,7 @@ static inline int sctp_v4_xmit(struct sk_buff *skb, return ip_queue_xmit(skb, ipfragok); } -static struct sctp_af sctp_ipv4_specific; +static struct sctp_af sctp_af_inet; static struct sctp_pf sctp_pf_inet = { .event_msgname = sctp_inet_event_msgname, @@ -844,7 +844,7 @@ static struct sctp_pf sctp_pf_inet = { .supported_addrs = sctp_inet_supported_addrs, .create_accept_sk = sctp_v4_create_accept_sk, .addr_v4map = sctp_v4_addr_v4map, - .af = &sctp_ipv4_specific, + .af = &sctp_af_inet }; /* Notifier for inetaddr addition/deletion events. */ @@ -906,7 +906,7 @@ static struct net_protocol sctp_protocol = { }; /* IPv4 address related functions. */ -static struct sctp_af sctp_ipv4_specific = { +static struct sctp_af sctp_af_inet = { .sa_family = AF_INET, .sctp_xmit = sctp_v4_xmit, .setsockopt = ip_setsockopt, @@ -1192,7 +1192,7 @@ SCTP_STATIC __init int sctp_init(void) sctp_sysctl_register(); INIT_LIST_HEAD(&sctp_address_families); - sctp_register_af(&sctp_ipv4_specific); + sctp_register_af(&sctp_af_inet); status = proto_register(&sctp_prot, 1); if (status) @@ -1249,7 +1249,7 @@ err_v6_init: proto_unregister(&sctp_prot); err_proto_register: sctp_sysctl_unregister(); - list_del(&sctp_ipv4_specific.list); + list_del(&sctp_af_inet.list); free_pages((unsigned long)sctp_port_hashtable, get_order(sctp_port_hashsize * sizeof(struct sctp_bind_hashbucket))); @@ -1299,7 +1299,7 @@ SCTP_STATIC __exit void sctp_exit(void) inet_unregister_protosw(&sctp_seqpacket_protosw); sctp_sysctl_unregister(); - list_del(&sctp_ipv4_specific.list); + list_del(&sctp_af_inet.list); free_pages((unsigned long)sctp_assoc_hashtable, get_order(sctp_assoc_hashsize * -- cgit v1.2.3-70-g09d2 From b40db6846847e82daf175641987df29324c425fa Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 27 Feb 2008 14:40:37 -0500 Subject: [SCTP]: Incorrect length was used in SCTP_*_AUTH_CHUNKS socket option The chunks are stored inside a parameter structure in the kernel and when we copy them to the user, we need to account for the parameter header. Signed-off-by: Vlad Yasevich --- net/sctp/socket.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 44797ad88a0..848df21dc6c 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -5070,6 +5070,7 @@ static int sctp_getsockopt_peer_auth_chunks(struct sock *sk, int len, struct sctp_authchunks val; struct sctp_association *asoc; struct sctp_chunks_param *ch; + u32 num_chunks; char __user *to; if (len <= sizeof(struct sctp_authchunks)) @@ -5086,10 +5087,11 @@ static int sctp_getsockopt_peer_auth_chunks(struct sock *sk, int len, ch = asoc->peer.peer_chunks; /* See if the user provided enough room for all the data */ - if (len < ntohs(ch->param_hdr.length)) + num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t); + if (len < num_chunks) return -EINVAL; - len = ntohs(ch->param_hdr.length); + len = num_chunks; if (put_user(len, optlen)) return -EFAULT; if (copy_to_user(to, ch->chunks, len)) @@ -5105,6 +5107,7 @@ static int sctp_getsockopt_local_auth_chunks(struct sock *sk, int len, struct sctp_authchunks val; struct sctp_association *asoc; struct sctp_chunks_param *ch; + u32 num_chunks; char __user *to; if (len <= sizeof(struct sctp_authchunks)) @@ -5123,10 +5126,11 @@ static int sctp_getsockopt_local_auth_chunks(struct sock *sk, int len, else ch = sctp_sk(sk)->ep->auth_chunk_list; - if (len < ntohs(ch->param_hdr.length)) + num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t); + if (len < num_chunks) return -EINVAL; - len = ntohs(ch->param_hdr.length); + len = num_chunks; if (put_user(len, optlen)) return -EFAULT; if (copy_to_user(to, ch->chunks, len)) -- cgit v1.2.3-70-g09d2 From 7e8616d8e7731b026019d9af7cc9914b8bb42bc7 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 27 Feb 2008 16:04:52 -0500 Subject: [SCTP]: Update AUTH structures to match declarations in draft-16. The new SCTP socket api (draft 16) updates the AUTH API structures. We never exported these since we knew they would change. Update the rest to match the draft. Signed-off-by: Vlad Yasevich --- include/net/sctp/user.h | 10 ++++++---- net/sctp/auth.c | 4 ++-- net/sctp/socket.c | 6 +++++- 3 files changed, 13 insertions(+), 7 deletions(-) diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h index 9462d6ae2f3..9619b9d35c9 100644 --- a/include/net/sctp/user.h +++ b/include/net/sctp/user.h @@ -411,6 +411,7 @@ struct sctp_event_subscribe { __u8 sctp_shutdown_event; __u8 sctp_partial_delivery_event; __u8 sctp_adaptation_layer_event; + __u8 sctp_authentication_event; }; /* @@ -587,7 +588,7 @@ struct sctp_authchunk { * endpoint requires the peer to use. */ struct sctp_hmacalgo { - __u16 shmac_num_idents; + __u32 shmac_num_idents; __u16 shmac_idents[]; }; @@ -600,7 +601,7 @@ struct sctp_hmacalgo { struct sctp_authkey { sctp_assoc_t sca_assoc_id; __u16 sca_keynumber; - __u16 sca_keylen; + __u16 sca_keylength; __u8 sca_key[]; }; @@ -693,8 +694,9 @@ struct sctp_status { * the peer requires to be received authenticated only. */ struct sctp_authchunks { - sctp_assoc_t gauth_assoc_id; - uint8_t gauth_chunks[]; + sctp_assoc_t gauth_assoc_id; + __u32 gauth_number_of_chunks; + uint8_t gauth_chunks[]; }; /* diff --git a/net/sctp/auth.c b/net/sctp/auth.c index 8bb79f28177..675a5c3e68a 100644 --- a/net/sctp/auth.c +++ b/net/sctp/auth.c @@ -838,11 +838,11 @@ int sctp_auth_set_key(struct sctp_endpoint *ep, } /* Create a new key data based on the info passed in */ - key = sctp_auth_create_key(auth_key->sca_keylen, GFP_KERNEL); + key = sctp_auth_create_key(auth_key->sca_keylength, GFP_KERNEL); if (!key) goto nomem; - memcpy(key->data, &auth_key->sca_key[0], auth_key->sca_keylen); + memcpy(key->data, &auth_key->sca_key[0], auth_key->sca_keylength); /* If we are replacing, remove the old keys data from the * key id. If we are adding new key id, add it to the diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 848df21dc6c..939892691a2 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1964,7 +1964,7 @@ static int sctp_setsockopt_disable_fragments(struct sock *sk, static int sctp_setsockopt_events(struct sock *sk, char __user *optval, int optlen) { - if (optlen != sizeof(struct sctp_event_subscribe)) + if (optlen > sizeof(struct sctp_event_subscribe)) return -EINVAL; if (copy_from_user(&sctp_sk(sk)->subscribe, optval, optlen)) return -EFAULT; @@ -5094,6 +5094,8 @@ static int sctp_getsockopt_peer_auth_chunks(struct sock *sk, int len, len = num_chunks; if (put_user(len, optlen)) return -EFAULT; + if (put_user(num_chunks, &p->gauth_number_of_chunks)) + return -EFAULT; if (copy_to_user(to, ch->chunks, len)) return -EFAULT; @@ -5133,6 +5135,8 @@ static int sctp_getsockopt_local_auth_chunks(struct sock *sk, int len, len = num_chunks; if (put_user(len, optlen)) return -EFAULT; + if (put_user(num_chunks, &p->gauth_number_of_chunks)) + return -EFAULT; if (copy_to_user(to, ch->chunks, len)) return -EFAULT; -- cgit v1.2.3-70-g09d2 From 16e297b35811c53288b35e15a5823fd8534c6d21 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 13:55:45 -0800 Subject: [ATM]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/atm/br2684.c | 4 ++-- net/atm/clip.c | 4 +--- net/atm/lec.c | 4 +--- net/atm/mpoa_proc.c | 3 +-- net/atm/proc.c | 8 ++++---- 5 files changed, 9 insertions(+), 14 deletions(-) diff --git a/net/atm/br2684.c b/net/atm/br2684.c index 574d9a96417..1b228065e74 100644 --- a/net/atm/br2684.c +++ b/net/atm/br2684.c @@ -742,9 +742,9 @@ static int __init br2684_init(void) { #ifdef CONFIG_PROC_FS struct proc_dir_entry *p; - if ((p = create_proc_entry("br2684", 0, atm_proc_root)) == NULL) + p = proc_create("br2684", 0, atm_proc_root, &br2684_proc_ops); + if (p == NULL) return -ENOMEM; - p->proc_fops = &br2684_proc_ops; #endif register_atm_ioctl(&br2684_ioctl_ops); return 0; diff --git a/net/atm/clip.c b/net/atm/clip.c index 86b885ec1cb..d30167c0b48 100644 --- a/net/atm/clip.c +++ b/net/atm/clip.c @@ -962,9 +962,7 @@ static int __init atm_clip_init(void) { struct proc_dir_entry *p; - p = create_proc_entry("arp", S_IRUGO, atm_proc_root); - if (p) - p->proc_fops = &arp_seq_fops; + p = proc_create("arp", S_IRUGO, atm_proc_root, &arp_seq_fops); } #endif diff --git a/net/atm/lec.c b/net/atm/lec.c index 1a8c4c6c0cd..0e450d12f03 100644 --- a/net/atm/lec.c +++ b/net/atm/lec.c @@ -1249,9 +1249,7 @@ static int __init lane_module_init(void) #ifdef CONFIG_PROC_FS struct proc_dir_entry *p; - p = create_proc_entry("lec", S_IRUGO, atm_proc_root); - if (p) - p->proc_fops = &lec_seq_fops; + p = proc_create("lec", S_IRUGO, atm_proc_root, &lec_seq_fops); #endif register_atm_ioctl(&lane_ioctl_ops); diff --git a/net/atm/mpoa_proc.c b/net/atm/mpoa_proc.c index 91f3ffc90db..4990541ef5d 100644 --- a/net/atm/mpoa_proc.c +++ b/net/atm/mpoa_proc.c @@ -276,12 +276,11 @@ int mpc_proc_init(void) { struct proc_dir_entry *p; - p = create_proc_entry(STAT_FILE_NAME, 0, atm_proc_root); + p = proc_create(STAT_FILE_NAME, 0, atm_proc_root, &mpc_file_operations); if (!p) { printk(KERN_ERR "Unable to initialize /proc/atm/%s\n", STAT_FILE_NAME); return -ENOMEM; } - p->proc_fops = &mpc_file_operations; p->owner = THIS_MODULE; return 0; } diff --git a/net/atm/proc.c b/net/atm/proc.c index 49125110bb8..e9693aed7ef 100644 --- a/net/atm/proc.c +++ b/net/atm/proc.c @@ -435,11 +435,11 @@ int atm_proc_dev_register(struct atm_dev *dev) goto err_out; sprintf(dev->proc_name,"%s:%d",dev->type, dev->number); - dev->proc_entry = create_proc_entry(dev->proc_name, 0, atm_proc_root); + dev->proc_entry = proc_create(dev->proc_name, 0, atm_proc_root, + &proc_atm_dev_ops); if (!dev->proc_entry) goto err_free_name; dev->proc_entry->data = dev; - dev->proc_entry->proc_fops = &proc_atm_dev_ops; dev->proc_entry->owner = THIS_MODULE; return 0; err_free_name: @@ -492,10 +492,10 @@ int __init atm_proc_init(void) for (e = atm_proc_ents; e->name; e++) { struct proc_dir_entry *dirent; - dirent = create_proc_entry(e->name, S_IRUGO, atm_proc_root); + dirent = proc_create(e->name, S_IRUGO, + atm_proc_root, e->proc_fops); if (!dirent) goto err_out_remove; - dirent->proc_fops = e->proc_fops; dirent->owner = THIS_MODULE; e->dirent = dirent; } -- cgit v1.2.3-70-g09d2 From 2ce8f047d5f3c0d782838bd2ecb6e4c440268e6d Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:00:59 -0800 Subject: [SUNRPC]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/sunrpc/cache.c | 14 ++++++-------- net/sunrpc/stats.c | 3 +-- 2 files changed, 7 insertions(+), 10 deletions(-) diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c index 636c8e04e0b..b5f2786251b 100644 --- a/net/sunrpc/cache.c +++ b/net/sunrpc/cache.c @@ -316,31 +316,29 @@ static int create_cache_proc_entries(struct cache_detail *cd) cd->proc_ent->owner = cd->owner; cd->channel_ent = cd->content_ent = NULL; - p = create_proc_entry("flush", S_IFREG|S_IRUSR|S_IWUSR, cd->proc_ent); + p = proc_create("flush", S_IFREG|S_IRUSR|S_IWUSR, + cd->proc_ent, &cache_flush_operations); cd->flush_ent = p; if (p == NULL) goto out_nomem; - p->proc_fops = &cache_flush_operations; p->owner = cd->owner; p->data = cd; if (cd->cache_request || cd->cache_parse) { - p = create_proc_entry("channel", S_IFREG|S_IRUSR|S_IWUSR, - cd->proc_ent); + p = proc_create("channel", S_IFREG|S_IRUSR|S_IWUSR, + cd->proc_ent, &cache_file_operations); cd->channel_ent = p; if (p == NULL) goto out_nomem; - p->proc_fops = &cache_file_operations; p->owner = cd->owner; p->data = cd; } if (cd->cache_show) { - p = create_proc_entry("content", S_IFREG|S_IRUSR|S_IWUSR, - cd->proc_ent); + p = proc_create("content", S_IFREG|S_IRUSR|S_IWUSR, + cd->proc_ent, &content_file_operations); cd->content_ent = p; if (p == NULL) goto out_nomem; - p->proc_fops = &content_file_operations; p->owner = cd->owner; p->data = cd; } diff --git a/net/sunrpc/stats.c b/net/sunrpc/stats.c index 5a16875f5ac..c6061a4346c 100644 --- a/net/sunrpc/stats.c +++ b/net/sunrpc/stats.c @@ -229,9 +229,8 @@ do_register(const char *name, void *data, const struct file_operations *fops) rpc_proc_init(); dprintk("RPC: registering /proc/net/rpc/%s\n", name); - ent = create_proc_entry(name, 0, proc_net_rpc); + ent = proc_create(name, 0, proc_net_rpc, fops); if (ent) { - ent->proc_fops = fops; ent->data = data; } return ent; -- cgit v1.2.3-70-g09d2 From 1e15dc981deb39056fa846fe55e1a1dbb175a98e Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:06:14 -0800 Subject: [IPX]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/ipx/ipx_proc.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/net/ipx/ipx_proc.c b/net/ipx/ipx_proc.c index d483a00dc42..5ed97ad0e2e 100644 --- a/net/ipx/ipx_proc.c +++ b/net/ipx/ipx_proc.c @@ -358,22 +358,19 @@ int __init ipx_proc_init(void) if (!ipx_proc_dir) goto out; - p = create_proc_entry("interface", S_IRUGO, ipx_proc_dir); + p = proc_create("interface", S_IRUGO, + ipx_proc_dir, &ipx_seq_interface_fops); if (!p) goto out_interface; - p->proc_fops = &ipx_seq_interface_fops; - p = create_proc_entry("route", S_IRUGO, ipx_proc_dir); + p = proc_create("route", S_IRUGO, ipx_proc_dir, &ipx_seq_route_fops); if (!p) goto out_route; - p->proc_fops = &ipx_seq_route_fops; - p = create_proc_entry("socket", S_IRUGO, ipx_proc_dir); + p = proc_create("socket", S_IRUGO, ipx_proc_dir, &ipx_seq_socket_fops); if (!p) goto out_socket; - p->proc_fops = &ipx_seq_socket_fops; - rc = 0; out: return rc; -- cgit v1.2.3-70-g09d2 From 7e0218099832d954d107f48de9e81bd521e16f24 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:08:54 -0800 Subject: [LLC]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/llc/llc_proc.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/net/llc/llc_proc.c b/net/llc/llc_proc.c index cb34bc0518e..48212c0a961 100644 --- a/net/llc/llc_proc.c +++ b/net/llc/llc_proc.c @@ -239,18 +239,14 @@ int __init llc_proc_init(void) goto out; llc_proc_dir->owner = THIS_MODULE; - p = create_proc_entry("socket", S_IRUGO, llc_proc_dir); + p = proc_create("socket", S_IRUGO, llc_proc_dir, &llc_seq_socket_fops); if (!p) goto out_socket; - p->proc_fops = &llc_seq_socket_fops; - - p = create_proc_entry("core", S_IRUGO, llc_proc_dir); + p = proc_create("core", S_IRUGO, llc_proc_dir, &llc_seq_core_fops); if (!p) goto out_core; - p->proc_fops = &llc_seq_core_fops; - rc = 0; out: return rc; -- cgit v1.2.3-70-g09d2 From 46ecf0b994715589b9f5f620beca4d6aaaa02028 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:10:51 -0800 Subject: [NEIGHBOUR]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/core/neighbour.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 2328acbd16c..aef01533dfb 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -1389,10 +1389,10 @@ void neigh_table_init_no_netlink(struct neigh_table *tbl) panic("cannot create neighbour cache statistics"); #ifdef CONFIG_PROC_FS - tbl->pde = create_proc_entry(tbl->id, 0, init_net.proc_net_stat); + tbl->pde = proc_create(tbl->id, 0, init_net.proc_net_stat, + &neigh_stat_seq_fops); if (!tbl->pde) panic("cannot create neighbour proc dir entry"); - tbl->pde->proc_fops = &neigh_stat_seq_fops; tbl->pde->data = tbl; #endif -- cgit v1.2.3-70-g09d2 From 25296d599ccc7e06af217329729e4d7154fa79a2 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:11:49 -0800 Subject: [PKTGEN]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/core/pktgen.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index bfcdfaebca5..20e63b302ba 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -3570,14 +3570,14 @@ static int pktgen_add_device(struct pktgen_thread *t, const char *ifname) if (err) goto out1; - pkt_dev->entry = create_proc_entry(ifname, 0600, pg_proc_dir); + pkt_dev->entry = proc_create(ifname, 0600, + pg_proc_dir, &pktgen_if_fops); if (!pkt_dev->entry) { printk(KERN_ERR "pktgen: cannot create %s/%s procfs entry.\n", PG_PROC_DIR, ifname); err = -EINVAL; goto out2; } - pkt_dev->entry->proc_fops = &pktgen_if_fops; pkt_dev->entry->data = pkt_dev; #ifdef CONFIG_XFRM pkt_dev->ipsmode = XFRM_MODE_TRANSPORT; @@ -3628,7 +3628,7 @@ static int __init pktgen_create_thread(int cpu) kthread_bind(p, cpu); t->tsk = p; - pe = create_proc_entry(t->tsk->comm, 0600, pg_proc_dir); + pe = proc_create(t->tsk->comm, 0600, pg_proc_dir, &pktgen_thread_fops); if (!pe) { printk(KERN_ERR "pktgen: cannot create %s/%s procfs entry.\n", PG_PROC_DIR, t->tsk->comm); @@ -3638,7 +3638,6 @@ static int __init pktgen_create_thread(int cpu) return -EINVAL; } - pe->proc_fops = &pktgen_thread_fops; pe->data = t; wake_up_process(p); @@ -3709,7 +3708,7 @@ static int __init pg_init(void) return -ENODEV; pg_proc_dir->owner = THIS_MODULE; - pe = create_proc_entry(PGCTRL, 0600, pg_proc_dir); + pe = proc_create(PGCTRL, 0600, pg_proc_dir, &pktgen_fops); if (pe == NULL) { printk(KERN_ERR "pktgen: ERROR: cannot create %s " "procfs entry.\n", PGCTRL); @@ -3717,7 +3716,6 @@ static int __init pg_init(void) return -EINVAL; } - pe->proc_fops = &pktgen_fops; pe->data = NULL; /* Register us to receive netdevice events */ -- cgit v1.2.3-70-g09d2 From 160f17e345f5b50484d6cdc985b8686a05bf015d Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:13:16 -0800 Subject: [SCTP]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/sctp/objcnt.c | 5 ++--- net/sctp/proc.c | 4 +--- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/net/sctp/objcnt.c b/net/sctp/objcnt.c index 14e294e3762..cfeb07ea1b0 100644 --- a/net/sctp/objcnt.c +++ b/net/sctp/objcnt.c @@ -132,12 +132,11 @@ void sctp_dbg_objcnt_init(void) { struct proc_dir_entry *ent; - ent = create_proc_entry("sctp_dbg_objcnt", 0, proc_net_sctp); + ent = proc_create("sctp_dbg_objcnt", 0, + proc_net_sctp, &sctp_objcnt_ops); if (!ent) printk(KERN_WARNING "sctp_dbg_objcnt: Unable to create /proc entry.\n"); - else - ent->proc_fops = &sctp_objcnt_ops; } /* Cleanup the objcount entry in the proc filesystem. */ diff --git a/net/sctp/proc.c b/net/sctp/proc.c index 69bb5a63fd8..9e214da82d9 100644 --- a/net/sctp/proc.c +++ b/net/sctp/proc.c @@ -108,12 +108,10 @@ int __init sctp_snmp_proc_init(void) { struct proc_dir_entry *p; - p = create_proc_entry("snmp", S_IRUGO, proc_net_sctp); + p = proc_create("snmp", S_IRUGO, proc_net_sctp, &sctp_snmp_seq_fops); if (!p) return -ENOMEM; - p->proc_fops = &sctp_snmp_seq_fops; - return 0; } -- cgit v1.2.3-70-g09d2 From 4436f4cbfac15acea139863e322ed2f9efb118d3 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:13:46 -0800 Subject: [IPV6]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/ipv6/proc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index 35e502a7249..199ef379e50 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -217,12 +217,12 @@ int snmp6_register_dev(struct inet6_dev *idev) if (!proc_net_devsnmp6) return -ENOENT; - p = create_proc_entry(idev->dev->name, S_IRUGO, proc_net_devsnmp6); + p = proc_create(idev->dev->name, S_IRUGO, + proc_net_devsnmp6, &snmp6_seq_fops); if (!p) return -ENOMEM; p->data = idev; - p->proc_fops = &snmp6_seq_fops; idev->stats.proc_dir_entry = p; return 0; -- cgit v1.2.3-70-g09d2 From 770207208e4374f013f6f49233d5c8c8df505e03 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:14:25 -0800 Subject: [IPV4]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/ipv4/route.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 525787b52b7..7b5e8e1d94b 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -542,12 +542,11 @@ static __init int ip_rt_proc_init(struct net *net) if (!pde) goto err1; - pde = create_proc_entry("rt_cache", S_IRUGO, net->proc_net_stat); + pde = proc_create("rt_cache", S_IRUGO, + net->proc_net_stat, &rt_cpu_seq_fops); if (!pde) goto err2; - pde->proc_fops = &rt_cpu_seq_fops; - #ifdef CONFIG_NET_CLS_ROUTE pde = create_proc_read_entry("rt_acct", 0, net->proc_net, ip_rt_acct_read, NULL); -- cgit v1.2.3-70-g09d2 From d45fba3625249fada590a2eea09c38e755a3a2a7 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:14:58 -0800 Subject: [8021Q]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/8021q/vlanproc.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c index a0ec4792559..146cfb0e988 100644 --- a/net/8021q/vlanproc.c +++ b/net/8021q/vlanproc.c @@ -161,11 +161,10 @@ int __init vlan_proc_init(void) if (!proc_vlan_dir) goto err; - proc_vlan_conf = create_proc_entry(name_conf, S_IFREG|S_IRUSR|S_IWUSR, - proc_vlan_dir); + proc_vlan_conf = proc_create(name_conf, S_IFREG|S_IRUSR|S_IWUSR, + proc_vlan_dir, &vlan_fops); if (!proc_vlan_conf) goto err; - proc_vlan_conf->proc_fops = &vlan_fops; return 0; err: @@ -182,13 +181,11 @@ int vlan_proc_add_dev(struct net_device *vlandev) { struct vlan_dev_info *dev_info = vlan_dev_info(vlandev); - dev_info->dent = create_proc_entry(vlandev->name, - S_IFREG|S_IRUSR|S_IWUSR, - proc_vlan_dir); + dev_info->dent = proc_create(vlandev->name, S_IFREG|S_IRUSR|S_IWUSR, + proc_vlan_dir, &vlandev_fops); if (!dev_info->dent) return -ENOBUFS; - dev_info->dent->proc_fops = &vlandev_fops; dev_info->dent->data = vlandev; return 0; } -- cgit v1.2.3-70-g09d2 From 6d37a1581695fba42f4b51e3ff4c2871552cd6d7 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:15:56 -0800 Subject: [WANROUTER]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/wanrouter/wanproc.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/net/wanrouter/wanproc.c b/net/wanrouter/wanproc.c index f2e54c3f064..5bebe40bf4e 100644 --- a/net/wanrouter/wanproc.c +++ b/net/wanrouter/wanproc.c @@ -292,14 +292,12 @@ int __init wanrouter_proc_init(void) if (!proc_router) goto fail; - p = create_proc_entry("config", S_IRUGO, proc_router); + p = proc_create("config", S_IRUGO, proc_router, &config_fops); if (!p) goto fail_config; - p->proc_fops = &config_fops; - p = create_proc_entry("status", S_IRUGO, proc_router); + p = proc_create("status", S_IRUGO, proc_router, &status_fops); if (!p) goto fail_stat; - p->proc_fops = &status_fops; return 0; fail_stat: remove_proc_entry("config", proc_router); @@ -329,10 +327,10 @@ int wanrouter_proc_add(struct wan_device* wandev) if (wandev->magic != ROUTER_MAGIC) return -EINVAL; - wandev->dent = create_proc_entry(wandev->name, S_IRUGO, proc_router); + wandev->dent = proc_create(wandev->name, S_IRUGO, + proc_router, &wandev_fops); if (!wandev->dent) return -ENOMEM; - wandev->dent->proc_fops = &wandev_fops; wandev->dent->data = wandev; return 0; } -- cgit v1.2.3-70-g09d2 From 2335f8ec27e125208d8d2d3e257a82862c4977d6 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 28 Feb 2008 14:16:33 -0800 Subject: [X25]: Use proc_create() to setup ->proc_fops first Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/x25/x25_proc.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/net/x25/x25_proc.c b/net/x25/x25_proc.c index 3f52b09bed0..1afa44d25be 100644 --- a/net/x25/x25_proc.c +++ b/net/x25/x25_proc.c @@ -312,20 +312,18 @@ int __init x25_proc_init(void) if (!x25_proc_dir) goto out; - p = create_proc_entry("route", S_IRUGO, x25_proc_dir); + p = proc_create("route", S_IRUGO, x25_proc_dir, &x25_seq_route_fops); if (!p) goto out_route; - p->proc_fops = &x25_seq_route_fops; - p = create_proc_entry("socket", S_IRUGO, x25_proc_dir); + p = proc_create("socket", S_IRUGO, x25_proc_dir, &x25_seq_socket_fops); if (!p) goto out_socket; - p->proc_fops = &x25_seq_socket_fops; - p = create_proc_entry("forward", S_IRUGO, x25_proc_dir); + p = proc_create("forward", S_IRUGO, x25_proc_dir, + &x25_seq_forward_fops); if (!p) goto out_forward; - p->proc_fops = &x25_seq_forward_fops; rc = 0; out: -- cgit v1.2.3-70-g09d2 From 931506d3b2208362efc678ee863ee42a90755e89 Mon Sep 17 00:00:00 2001 From: Anantha Subramanyam Date: Thu, 28 Feb 2008 15:58:35 -0800 Subject: sata_svw: Add support for HT1100 SATA controller This patch adds support (including ATAPI DMA) for HT1100 (aka BCM11000) SATA controller. Signed-off-by: Anantha Subramanyam Signed-off-by: Jeff Garzik --- drivers/ata/sata_svw.c | 77 +++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 63 insertions(+), 14 deletions(-) diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 69f651e0bc9..840d1c4a785 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -45,6 +45,8 @@ #include #include #include +#include +#include #include #ifdef CONFIG_PPC_OF @@ -59,6 +61,7 @@ enum { /* ap->flags bits */ K2_FLAG_SATA_8_PORTS = (1 << 24), K2_FLAG_NO_ATAPI_DMA = (1 << 25), + K2_FLAG_BAR_POS_3 = (1 << 26), /* Taskfile registers offsets */ K2_SATA_TF_CMD_OFFSET = 0x00, @@ -88,8 +91,10 @@ enum { /* Port stride */ K2_SATA_PORT_OFFSET = 0x100, - board_svw4 = 0, - board_svw8 = 1, + chip_svw4 = 0, + chip_svw8 = 1, + chip_svw42 = 2, /* bar 3 */ + chip_svw43 = 3, /* bar 5 */ }; static u8 k2_stat_check_status(struct ata_port *ap); @@ -97,10 +102,25 @@ static u8 k2_stat_check_status(struct ata_port *ap); static int k2_sata_check_atapi_dma(struct ata_queued_cmd *qc) { + u8 cmnd = qc->scsicmd->cmnd[0]; + if (qc->ap->flags & K2_FLAG_NO_ATAPI_DMA) return -1; /* ATAPI DMA not supported */ + else { + switch (cmnd) { + case READ_10: + case READ_12: + case READ_16: + case WRITE_10: + case WRITE_12: + case WRITE_16: + return 0; + + default: + return -1; + } - return 0; + } } static int k2_sata_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val) @@ -354,7 +374,7 @@ static const struct ata_port_operations k2_sata_ops = { }; static const struct ata_port_info k2_port_info[] = { - /* board_svw4 */ + /* chip_svw4 */ { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA, @@ -363,7 +383,7 @@ static const struct ata_port_info k2_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, - /* board_svw8 */ + /* chip_svw8 */ { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA | @@ -373,6 +393,24 @@ static const struct ata_port_info k2_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, + /* chip_svw42 */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | K2_FLAG_BAR_POS_3, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA6, + .port_ops = &k2_sata_ops, + }, + /* chip_svw43 */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA6, + .port_ops = &k2_sata_ops, + }, }; static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base) @@ -402,7 +440,7 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en { &k2_port_info[ent->driver_data], NULL }; struct ata_host *host; void __iomem *mmio_base; - int n_ports, i, rc; + int n_ports, i, rc, bar_pos; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -416,6 +454,9 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en if (!host) return -ENOMEM; + bar_pos = 5; + if (ppi[0]->flags & K2_FLAG_BAR_POS_3) + bar_pos = 3; /* * If this driver happens to only be useful on Apple's K2, then * we should check that here as it has a normal Serverworks ID @@ -428,17 +469,23 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en * Check if we have resources mapped at all (second function may * have been disabled by firmware) */ - if (pci_resource_len(pdev, 5) == 0) + if (pci_resource_len(pdev, bar_pos) == 0) { + /* In IDE mode we need to pin the device to ensure that + pcim_release does not clear the busmaster bit in config + space, clearing causes busmaster DMA to fail on + ports 3 & 4 */ + pcim_pin_device(pdev); return -ENODEV; + } /* Request and iomap PCI regions */ - rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); + rc = pcim_iomap_regions(pdev, 1 << bar_pos, DRV_NAME); if (rc == -EBUSY) pcim_pin_device(pdev); if (rc) return rc; host->iomap = pcim_iomap_table(pdev); - mmio_base = host->iomap[5]; + mmio_base = host->iomap[bar_pos]; /* different controllers have different number of ports - currently 4 or 8 */ /* All ports are on the same function. Multi-function device is no @@ -483,11 +530,13 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en * controller * */ static const struct pci_device_id k2_sata_pci_tbl[] = { - { PCI_VDEVICE(SERVERWORKS, 0x0240), board_svw4 }, - { PCI_VDEVICE(SERVERWORKS, 0x0241), board_svw4 }, - { PCI_VDEVICE(SERVERWORKS, 0x0242), board_svw8 }, - { PCI_VDEVICE(SERVERWORKS, 0x024a), board_svw4 }, - { PCI_VDEVICE(SERVERWORKS, 0x024b), board_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0240), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw8 }, + { PCI_VDEVICE(SERVERWORKS, 0x024a), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x024b), chip_svw4 }, + { PCI_VDEVICE(SERVERWORKS, 0x0410), chip_svw42 }, + { PCI_VDEVICE(SERVERWORKS, 0x0411), chip_svw43 }, { } }; -- cgit v1.2.3-70-g09d2 From 71791bee90dd29b292c7e55c1c00857578c912bd Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Mon, 25 Feb 2008 14:58:37 +1100 Subject: [POWERPC] spufs: fix order of sputrace thread IDs Currently, we get the following output from sputrace: [5.097935954] 1606: spufs_ps_nopfn__enter (thread = 1605, spu = -1) [5.097958164] 1606: spufs_ps_nopfn__insert (thread = 1605, spu = 15) [5.097973529] 1607: spufs_ps_nopfn__enter (thread = 1605, spu = -1) [5.097989174] 1607: spufs_ps_nopfn__insert (thread = 1605, spu = 14) Which leads me to believe that 160[67] is the current thread ID, and 1605 is the context backing the psmap. However, the 'current' and 'owner' tids are reversed - the 'current' tid is on the right. This change puts the current thread ID in the left-hand column instead, and renames the right to 'ctxthread'. Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/sputrace.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c index 01974f7776e..79aa773f3c9 100644 --- a/arch/powerpc/platforms/cell/spufs/sputrace.c +++ b/arch/powerpc/platforms/cell/spufs/sputrace.c @@ -58,12 +58,12 @@ static int sputrace_sprint(char *tbuf, int n) ktime_to_timespec(ktime_sub(t->tstamp, sputrace_start)); return snprintf(tbuf, n, - "[%lu.%09lu] %d: %s (thread = %d, spu = %d)\n", + "[%lu.%09lu] %d: %s (ctxthread = %d, spu = %d)\n", (unsigned long) tv.tv_sec, (unsigned long) tv.tv_nsec, - t->owner_tid, - t->name, t->curr_tid, + t->name, + t->owner_tid, t->number); } @@ -188,6 +188,7 @@ struct spu_probe spu_probes[] = { { "spufs_ps_nopfn__insert", "%p %p", spu_context_event }, { "spu_acquire_saved__enter", "%p", spu_context_nospu_event }, { "destroy_spu_context__enter", "%p", spu_context_nospu_event }, + { "spufs_stop_callback__enter", "%p %p", spu_context_event }, }; static int __init sputrace_init(void) -- cgit v1.2.3-70-g09d2 From 0aef45645174525ee6aa7baed247a130e052740d Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Fri, 29 Feb 2008 12:08:42 +0800 Subject: Blackfin Serial Driver: Fix bug - Only insert UART rx char in timer task. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3910 Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 23 +++++++---------------- 1 file changed, 7 insertions(+), 16 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 2a411748579..0aa345b9a38 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -48,7 +48,7 @@ #define DMA_RX_XCOUNT 512 #define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) -#define DMA_RX_FLUSH_JIFFIES 5 +#define DMA_RX_FLUSH_JIFFIES (HZ / 50) #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); @@ -393,7 +393,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) { struct circ_buf *xmit = &uart->port.info->xmit; unsigned short ier; - int flags = 0; uart->tx_done = 0; @@ -491,9 +490,7 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) { int x_pos, pos; - int flags = 0; - spin_lock_irqsave(&uart->port.lock, flags); uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); x_pos = get_dma_curr_xcount(uart->rx_dma_channel); uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; @@ -509,7 +506,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) bfin_serial_dma_rx_chars(uart); uart->rx_dma_buf.tail = uart->rx_dma_buf.head; } - spin_unlock_irqrestore(&uart->port.lock, flags); + uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; add_timer(&(uart->rx_dma_timer)); } @@ -548,22 +545,16 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; unsigned short irqstat; - int pos; - - uart->rx_dma_nrows = DMA_RX_YCOUNT - - get_dma_curr_ycount(uart->rx_dma_channel); - pos = DMA_RX_XCOUNT * uart->rx_dma_nrows; - if (pos != uart->rx_dma_buf.tail) { - uart->rx_dma_buf.head = pos; - bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.tail = uart->rx_dma_buf.head; - } spin_lock(&uart->port.lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); clear_dma_irqstat(uart->rx_dma_channel); - spin_unlock(&uart->port.lock); + + del_timer(&(uart->rx_dma_timer)); + uart->rx_dma_timer.expires = jiffies; + add_timer(&(uart->rx_dma_timer)); + return IRQ_HANDLED; } #endif -- cgit v1.2.3-70-g09d2 From fae9ca791507876c3ccaa8ab686b2ce42dc7a560 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 29 Feb 2008 15:16:48 +1100 Subject: [POWERPC] spufs: synchronize IRQ when disabling There is a small race between the context save procedure and the SPU interrupt handling, where we expect all interrupt processing to have finished after disabling them, while an interrupt is still being processed on another CPU. The obvious fix is to call synchronize_irq() after disabling the interrupts at the start of the context save procedure to make sure we never access the SPU any more during an ongoing save or even after that. Thanks to Benjamin Herrenschmidt for pointing this out. Acked-by: Benjamin Herrenschmidt Signed-off-by: Arnd Bergmann Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/switch.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c index 6f5886c7b1f..e9dc7a55d1b 100644 --- a/arch/powerpc/platforms/cell/spufs/switch.c +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -34,6 +34,7 @@ #include #include +#include #include #include #include @@ -117,6 +118,8 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu) * Write INT_MASK_class1 with value of 0. * Save INT_Mask_class2 in CSA. * Write INT_MASK_class2 with value of 0. + * Synchronize all three interrupts to be sure + * we no longer execute a handler on another CPU. */ spin_lock_irq(&spu->register_lock); if (csa) { @@ -129,6 +132,9 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu) spu_int_mask_set(spu, 2, 0ul); eieio(); spin_unlock_irq(&spu->register_lock); + synchronize_irq(spu->irqs[0]); + synchronize_irq(spu->irqs[1]); + synchronize_irq(spu->irqs[2]); } static inline void set_watchdog_timer(struct spu_state *csa, struct spu *spu) -- cgit v1.2.3-70-g09d2 From cc4b7c1814c9ad375e8167ea4a9ec4a0ec1ada04 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 26 Feb 2008 07:01:56 +0100 Subject: [POWERPC] spufs: invalidate SLB translation before adding a new entry When we replace an SLB entry in the MFC after using up all the available entries, there is a short window in which an incorrect entry is marked as valid. The problem is that the 'valid' bit is stored in the ESID, which is always written after the VSID. Overwriting the VSID first will make the original ESID entry point to the new VSID, which means that any concurrent DMA accessing the old ESID ends up being redirected to the new virtual address. A few cycles later, we write the new ESID and everything is fine again. That race can be closed by writing a zero entry to the ESID first, which makes sure that the VSID is not accessed until we write the new ESID. Note that we don't actually need to invalidate the SLB entry using the invalidation register, which would also flush any ERAT entries for that segment, because the segment translation does not become invalid but is only removed from the SLB cache. Signed-off-by: Arnd Bergmann Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spu_base.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 87eb07f94c5..cfc28e93c82 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -148,7 +148,11 @@ static inline void spu_load_slb(struct spu *spu, int slbe, struct spu_slb *slb) __func__, slbe, slb->vsid, slb->esid); out_be64(&priv2->slb_index_W, slbe); + /* set invalid before writing vsid */ + out_be64(&priv2->slb_esid_RW, 0); + /* now it's safe to write the vsid */ out_be64(&priv2->slb_vsid_RW, slb->vsid); + /* setting the new esid makes the entry valid again */ out_be64(&priv2->slb_esid_RW, slb->esid); } -- cgit v1.2.3-70-g09d2 From c92a1acb675058375cc508ad024c33358b42d766 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 28 Feb 2008 06:06:30 +0100 Subject: [POWERPC] spufs: serialize SLB invalidation against SLB loading There is a potential race between flushes of the entire SLB in the MFC and the point where new entries are being established. The problem is that we might put a ESID entry into the MFC SLB when the VSID entry has just been cleared by the global flush. This can be circumvented by holding the register_lock throughout both the flushing and the creation of SLB entries. Signed-off-by: Arnd Bergmann Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spu_base.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index cfc28e93c82..712001f6b7d 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -81,9 +81,12 @@ struct spu_slb { void spu_invalidate_slbs(struct spu *spu) { struct spu_priv2 __iomem *priv2 = spu->priv2; + unsigned long flags; + spin_lock_irqsave(&spu->register_lock, flags); if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK) out_be64(&priv2->slb_invalidate_all_W, 0UL); + spin_unlock_irqrestore(&spu->register_lock, flags); } EXPORT_SYMBOL_GPL(spu_invalidate_slbs); @@ -294,9 +297,11 @@ void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa, nr_slbs++; } + spin_lock_irq(&spu->register_lock); /* Add the set of SLBs */ for (i = 0; i < nr_slbs; i++) spu_load_slb(spu, i, &slbs[i]); + spin_unlock_irq(&spu->register_lock); } EXPORT_SYMBOL_GPL(spu_setup_kernel_slbs); @@ -341,13 +346,14 @@ spu_irq_class_1(int irq, void *data) if (stat & CLASS1_STORAGE_FAULT_INTR) spu_mfc_dsisr_set(spu, 0ul); spu_int_stat_clear(spu, 1, stat); - spin_unlock(&spu->register_lock); - pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat, - dar, dsisr); if (stat & CLASS1_SEGMENT_FAULT_INTR) __spu_trap_data_seg(spu, dar); + spin_unlock(&spu->register_lock); + pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat, + dar, dsisr); + if (stat & CLASS1_STORAGE_FAULT_INTR) __spu_trap_data_map(spu, dar, dsisr); -- cgit v1.2.3-70-g09d2 From 1bd960ee2b1231759bd485aad0fa483c2f793a3b Mon Sep 17 00:00:00 2001 From: Josef Jeff Sipek Date: Fri, 29 Feb 2008 13:58:40 +1100 Subject: [XFS] If you mount an XFS filesystem with no mount options at all, then the "ikeep" option is set rather than "noikeep". This regression was introduced in 970451. With no mount options specified, xfs_parseargs() does the following: int ikeep = 0; args->flags |= XFSMNT_BARRIER; args->flags2 |= XFSMNT2_COMPAT_IOSIZE; if (!options) goto done; It only sets the above two options by default and before, it also used to set XFSMNT_IDELETE by default. If options are specified, then if (!(args->flags & XFSMNT_DMAPI) && !ikeep) args->flags |= XFSMNT_IDELETE; is executed later on which is skipped by the "goto done;" above. The solution is to invert the logic. SGI-PV: 977771 SGI-Modid: xfs-linux-melb:xfs-kern:30590a Signed-off-by: Niv Sardi Signed-off-by: Barry Naujok Signed-off-by: Josef 'Jeff' Sipek Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 14 +++++++------- fs/xfs/xfs_clnt.h | 2 +- fs/xfs/xfs_ialloc.c | 2 +- fs/xfs/xfs_mount.h | 2 +- fs/xfs/xfs_vfsops.c | 4 ++-- 5 files changed, 12 insertions(+), 12 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 21dfc9da235..8831d951879 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -171,7 +171,7 @@ xfs_parseargs( char *this_char, *value, *eov; int dsunit, dswidth, vol_dsunit, vol_dswidth; int iosize; - int ikeep = 0; + int dmapi_implies_ikeep = 1; args->flags |= XFSMNT_BARRIER; args->flags2 |= XFSMNT2_COMPAT_IOSIZE; @@ -302,10 +302,10 @@ xfs_parseargs( } else if (!strcmp(this_char, MNTOPT_NOBARRIER)) { args->flags &= ~XFSMNT_BARRIER; } else if (!strcmp(this_char, MNTOPT_IKEEP)) { - ikeep = 1; - args->flags &= ~XFSMNT_IDELETE; + args->flags |= XFSMNT_IKEEP; } else if (!strcmp(this_char, MNTOPT_NOIKEEP)) { - args->flags |= XFSMNT_IDELETE; + dmapi_implies_ikeep = 0; + args->flags &= ~XFSMNT_IKEEP; } else if (!strcmp(this_char, MNTOPT_LARGEIO)) { args->flags2 &= ~XFSMNT2_COMPAT_IOSIZE; } else if (!strcmp(this_char, MNTOPT_NOLARGEIO)) { @@ -410,8 +410,8 @@ xfs_parseargs( * Note that if "ikeep" or "noikeep" mount options are * supplied, then they are honored. */ - if (!(args->flags & XFSMNT_DMAPI) && !ikeep) - args->flags |= XFSMNT_IDELETE; + if ((args->flags & XFSMNT_DMAPI) && dmapi_implies_ikeep) + args->flags |= XFSMNT_IKEEP; if ((args->flags & XFSMNT_NOALIGN) != XFSMNT_NOALIGN) { if (dsunit) { @@ -446,6 +446,7 @@ xfs_showargs( { static struct proc_xfs_info xfs_info_set[] = { /* the few simple ones we can get from the mount struct */ + { XFS_MOUNT_IKEEP, "," MNTOPT_IKEEP }, { XFS_MOUNT_WSYNC, "," MNTOPT_WSYNC }, { XFS_MOUNT_INO64, "," MNTOPT_INO64 }, { XFS_MOUNT_NOALIGN, "," MNTOPT_NOALIGN }, @@ -461,7 +462,6 @@ xfs_showargs( }; static struct proc_xfs_info xfs_info_unset[] = { /* the few simple ones we can get from the mount struct */ - { XFS_MOUNT_IDELETE, "," MNTOPT_IKEEP }, { XFS_MOUNT_COMPAT_IOSIZE, "," MNTOPT_LARGEIO }, { XFS_MOUNT_BARRIER, "," MNTOPT_NOBARRIER }, { XFS_MOUNT_SMALL_INUMS, "," MNTOPT_64BITINODE }, diff --git a/fs/xfs/xfs_clnt.h b/fs/xfs/xfs_clnt.h index d16c1b97107..d5d1e60ee22 100644 --- a/fs/xfs/xfs_clnt.h +++ b/fs/xfs/xfs_clnt.h @@ -86,7 +86,7 @@ struct xfs_mount_args { #define XFSMNT_NOUUID 0x01000000 /* Ignore fs uuid */ #define XFSMNT_DMAPI 0x02000000 /* enable dmapi/xdsm */ #define XFSMNT_BARRIER 0x04000000 /* use write barriers */ -#define XFSMNT_IDELETE 0x08000000 /* inode cluster delete */ +#define XFSMNT_IKEEP 0x08000000 /* inode cluster delete */ #define XFSMNT_SWALLOC 0x10000000 /* turn on stripe width * allocation */ #define XFSMNT_DIRSYNC 0x40000000 /* sync creat,link,unlink,rename diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c index c5836b951d0..db9d5fa600a 100644 --- a/fs/xfs/xfs_ialloc.c +++ b/fs/xfs/xfs_ialloc.c @@ -1053,7 +1053,7 @@ xfs_difree( /* * When an inode cluster is free, it becomes eligible for removal */ - if ((mp->m_flags & XFS_MOUNT_IDELETE) && + if (!(mp->m_flags & XFS_MOUNT_IKEEP) && (rec.ir_freecount == XFS_IALLOC_INODES(mp))) { *delete = 1; diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index f7c620ec6e6..1d8a4728d84 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -366,7 +366,7 @@ typedef struct xfs_mount { #define XFS_MOUNT_SMALL_INUMS (1ULL << 15) /* users wants 32bit inodes */ #define XFS_MOUNT_NOUUID (1ULL << 16) /* ignore uuid during mount */ #define XFS_MOUNT_BARRIER (1ULL << 17) -#define XFS_MOUNT_IDELETE (1ULL << 18) /* delete empty inode clusters*/ +#define XFS_MOUNT_IKEEP (1ULL << 18) /* keep empty inode clusters*/ #define XFS_MOUNT_SWALLOC (1ULL << 19) /* turn on stripe width * allocation */ #define XFS_MOUNT_RDONLY (1ULL << 20) /* read-only fs */ diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c index 413587f0215..7321304a69c 100644 --- a/fs/xfs/xfs_vfsops.c +++ b/fs/xfs/xfs_vfsops.c @@ -281,8 +281,8 @@ xfs_start_flags( mp->m_readio_log = mp->m_writeio_log = ap->iosizelog; } - if (ap->flags & XFSMNT_IDELETE) - mp->m_flags |= XFS_MOUNT_IDELETE; + if (ap->flags & XFSMNT_IKEEP) + mp->m_flags |= XFS_MOUNT_IKEEP; if (ap->flags & XFSMNT_DIRSYNC) mp->m_flags |= XFS_MOUNT_DIRSYNC; if (ap->flags & XFSMNT_ATTR2) -- cgit v1.2.3-70-g09d2 From be71716e464f4ea38f08034dc666f2feb55535d9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 28 Feb 2008 20:38:15 -0800 Subject: [SPARC64]: Adjust kernel PC validation test in fault handler. Because of the new futex validation init handler, we have to accept faults in init section text as well as the normal kernel text. Thanks to Tom Callaway for the bug report. Signed-off-by: David S. Miller --- arch/sparc64/mm/fault.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c index 91836336028..2650d0d33ac 100644 --- a/arch/sparc64/mm/fault.c +++ b/arch/sparc64/mm/fault.c @@ -286,7 +286,7 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) unsigned long tpc = regs->tpc; /* Sanity check the PC. */ - if ((tpc >= KERNBASE && tpc < (unsigned long) _etext) || + if ((tpc >= KERNBASE && tpc < (unsigned long) __init_end) || (tpc >= MODULES_VADDR && tpc < MODULES_END)) { /* Valid, no problems... */ } else { -- cgit v1.2.3-70-g09d2 From 2a58aa33daef37134c8a43dca0b7578c3fa7f993 Mon Sep 17 00:00:00 2001 From: Andre Detsch Date: Mon, 25 Feb 2008 15:07:42 -0300 Subject: [POWERPC] spufs: fix use time accounting on SPE-overcommit The spu_runcntl_RW register is restored within spu_restore function. So, at the end of spu_bind_context, the SPU context is not just loaded, but running. This change corrects the state switch to account the time as USER. Signed-off-by: Andre Detsch Signed-off-by: Jeremy Kerr --- arch/powerpc/platforms/cell/spufs/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 3a5972117de..5d5f680cd0b 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -246,7 +246,7 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx) spu_switch_notify(spu, ctx); ctx->state = SPU_STATE_RUNNABLE; - spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED); + spuctx_switch_state(ctx, SPU_UTIL_USER); } /* -- cgit v1.2.3-70-g09d2 From b84f08d49188a18d965fab8463c9cb679785eb39 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 18 Feb 2008 12:36:11 +0100 Subject: [ALSA] hda-codec - Fix Master volume on HP dv8000 HP dv8000 laptop has a problem with Master volume. It's due to the connection of the widget 0x13. When it's connected from the analog amp mixer (0x19), it works as expected mysteriously (ALSA bug#3775): https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3775 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index f7cd3a804b1..7206b30cbf9 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -1230,6 +1230,11 @@ static struct hda_verb cxt5047_toshiba_init_verbs[] = { static struct hda_verb cxt5047_hp_init_verbs[] = { /* pin sensing on HP jack */ {0x13, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_HP_EVENT}, + /* 0x13 is actually shared by both HP and speaker; + * setting the connection to 0 (=0x19) makes the master volume control + * working mysteriouslly... + */ + {0x13, AC_VERB_SET_CONNECT_SEL, 0x0}, /* Record selector: Ext Mic */ {0x12, AC_VERB_SET_CONNECT_SEL,0x03}, {0x19, AC_VERB_SET_AMP_GAIN_MUTE, -- cgit v1.2.3-70-g09d2 From ee47fd12d73706edb2a10efd05d5eed15b4d1e08 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 20 Feb 2008 17:13:15 +0100 Subject: [ALSA] ASoC: Fix TLV320AIC3X PLL divider table for 64 kHz rate Signed-off-by: Jarkko Nikula Signed-off-by: Takashi Iwai --- sound/soc/codecs/tlv320aic3x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index 710e0287ef8..569ecaca0e8 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -681,8 +681,8 @@ static const struct aic3x_rate_divs aic3x_divs[] = { {22579200, 48000, 48000, 0x0, 8, 7075}, {33868800, 48000, 48000, 0x0, 5, 8049}, /* 64k */ - {22579200, 96000, 96000, 0x1, 8, 7075}, - {33868800, 96000, 96000, 0x1, 5, 8049}, + {22579200, 64000, 96000, 0x1, 8, 7075}, + {33868800, 64000, 96000, 0x1, 5, 8049}, /* 88.2k */ {22579200, 88200, 88200, 0x0, 8, 0}, {33868800, 88200, 88200, 0x0, 5, 3333}, -- cgit v1.2.3-70-g09d2 From d513202efd5bb9974545ef1c7f951467b21eb3a5 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 25 Feb 2008 11:01:00 +0100 Subject: [ALSA] usb-audio: add workaround for broken E-Mu frequency feedback Add a workaround for the feedback pipe of E-Mu 0202/0404 USB devices that reports the number of samples per packet instead of the number of samples per microframe. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/usb/usbaudio.c | 38 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 36 insertions(+), 2 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 8fa93566570..675672f313b 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -479,6 +479,33 @@ static int retire_playback_sync_urb_hs(struct snd_usb_substream *subs, return 0; } +/* + * process after E-Mu 0202/0404 high speed playback sync complete + * + * These devices return the number of samples per packet instead of the number + * of samples per microframe. + */ +static int retire_playback_sync_urb_hs_emu(struct snd_usb_substream *subs, + struct snd_pcm_runtime *runtime, + struct urb *urb) +{ + unsigned int f; + unsigned long flags; + + if (urb->iso_frame_desc[0].status == 0 && + urb->iso_frame_desc[0].actual_length == 4) { + f = combine_quad((u8*)urb->transfer_buffer) & 0x0fffffff; + f >>= subs->datainterval; + if (f >= subs->freqn - subs->freqn / 8 && f <= subs->freqmax) { + spin_lock_irqsave(&subs->lock, flags); + subs->freqm = f; + spin_unlock_irqrestore(&subs->lock, flags); + } + } + + return 0; +} + /* determine the number of frames in the next packet */ static int snd_usb_audio_next_packet_size(struct snd_usb_substream *subs) { @@ -2219,10 +2246,17 @@ static void init_substream(struct snd_usb_stream *as, int stream, struct audiofo subs->stream = as; subs->direction = stream; subs->dev = as->chip->dev; - if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) + if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) { subs->ops = audio_urb_ops[stream]; - else + } else { subs->ops = audio_urb_ops_high_speed[stream]; + switch (as->chip->usb_id) { + case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */ + case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */ + subs->ops.retire_sync = retire_playback_sync_urb_hs_emu; + break; + } + } snd_pcm_set_ops(as->pcm, stream, stream == SNDRV_PCM_STREAM_PLAYBACK ? &snd_usb_playback_ops : &snd_usb_capture_ops); -- cgit v1.2.3-70-g09d2 From 20cde9e8f83711dca532c49605914d50292d9ce5 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 25 Feb 2008 11:04:41 +0100 Subject: [ALSA] sb8: fix SB 1.0 capture DMA programming Fix a wrong version check that would cause an invalid command to be sent to SB 1.0 chips. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/isa/sb/sb8_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/isa/sb/sb8_main.c b/sound/isa/sb/sb8_main.c index 6304c3a89ba..fe03bb82053 100644 --- a/sound/isa/sb/sb8_main.c +++ b/sound/isa/sb/sb8_main.c @@ -277,7 +277,7 @@ static int snd_sb8_capture_prepare(struct snd_pcm_substream *substream) } else { snd_sbdsp_command(chip, 256 - runtime->rate_den); } - if (chip->capture_format != SB_DSP_OUTPUT) { + if (chip->capture_format != SB_DSP_INPUT) { count--; snd_sbdsp_command(chip, SB_DSP_BLOCK_SIZE); snd_sbdsp_command(chip, count & 0xff); -- cgit v1.2.3-70-g09d2 From fb304ce53afbb653bfa67cc81ee9cf06edcbf68e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 25 Feb 2008 15:32:01 +0100 Subject: [ALSA] hda-codec - Fix AD1988 capture elements The some indices of capture elements of AD1988 are wrongly assigned. This patch fixes it. See ALSA bug#3795 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3795 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 19f08846d6f..c8649282c2c 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -1778,9 +1778,9 @@ static hda_nid_t ad1988_capsrc_nids[3] = { static struct hda_input_mux ad1988_6stack_capture_source = { .num_items = 5, .items = { - { "Front Mic", 0x0 }, - { "Line", 0x1 }, - { "Mic", 0x4 }, + { "Front Mic", 0x1 }, /* port-B */ + { "Line", 0x2 }, /* port-C */ + { "Mic", 0x4 }, /* port-E */ { "CD", 0x5 }, { "Mix", 0x9 }, }, @@ -1789,7 +1789,7 @@ static struct hda_input_mux ad1988_6stack_capture_source = { static struct hda_input_mux ad1988_laptop_capture_source = { .num_items = 3, .items = { - { "Mic/Line", 0x0 }, + { "Mic/Line", 0x1 }, /* port-B */ { "CD", 0x5 }, { "Mix", 0x9 }, }, -- cgit v1.2.3-70-g09d2 From 3f1eeaed2c0dc6c787a47ae7a6c774589a04a3a2 Mon Sep 17 00:00:00 2001 From: Tony Vroon Date: Mon, 25 Feb 2008 16:44:13 +0100 Subject: [ALSA] hda-codec - Add Fujitsu Lifebook E8410 to quirk table Add the proper model entry for Fujitsu Lifebook E8410 with ALC262 codec. From: Tony Vroon Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 777f8c01ca7..1534f0866f7 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9238,6 +9238,7 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = { SND_PCI_QUIRK(0x104d, 0x900e, "Sony ASSAMD", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x104d, 0x9015, "Sony 0x9015", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x10cf, 0x1397, "Fujitsu", ALC262_FUJITSU), + SND_PCI_QUIRK(0x10cf, 0x142d, "Fujitsu Lifebook E8410", ALC262_FUJITSU), SND_PCI_QUIRK(0x144d, 0xc032, "Samsung Q1 Ultra", ALC262_ULTRA), SND_PCI_QUIRK(0x17ff, 0x0560, "Benq ED8", ALC262_BENQ_ED8), SND_PCI_QUIRK(0x17ff, 0x058d, "Benq T31-16", ALC262_BENQ_T31), -- cgit v1.2.3-70-g09d2 From b930b9f41d5e9eadd9041f273c4d6d18e7061d05 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 26 Feb 2008 08:40:57 +0100 Subject: [ALSA] oxygen: add owner field I forgot to set the module owner for the HiFier/Xonar models. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/oxygen/hifier.c | 1 + sound/pci/oxygen/virtuoso.c | 1 + 2 files changed, 2 insertions(+) diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c index 3ea1f05228a..666f69a3312 100644 --- a/sound/pci/oxygen/hifier.c +++ b/sound/pci/oxygen/hifier.c @@ -150,6 +150,7 @@ static const struct oxygen_model model_hifier = { .shortname = "C-Media CMI8787", .longname = "C-Media Oxygen HD Audio", .chip = "CMI8788", + .owner = THIS_MODULE, .init = hifier_init, .control_filter = hifier_control_filter, .mixer_init = hifier_mixer_init, diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index 40e92f5cd69..d163397b85c 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -389,6 +389,7 @@ static const struct oxygen_model model_xonar = { .shortname = "Asus AV200", .longname = "Asus Virtuoso 200", .chip = "AV200", + .owner = THIS_MODULE, .init = xonar_init, .control_filter = xonar_control_filter, .mixer_init = xonar_mixer_init, -- cgit v1.2.3-70-g09d2 From 0b167bf456d4af58103e2072bc4bd5733e7e7579 Mon Sep 17 00:00:00 2001 From: Andrew Paprocki Date: Sun, 3 Feb 2008 10:15:44 +0100 Subject: [ALSA] hda_intel - Add model quirk for Albatron KI690-AM2 motherboard This adds a quirk to the Realtek ALC883 table for the Albatron KI690-AM2 motherboard to use the 6stack-dig model. Signed-off-by: Andrew Paprocki Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 1534f0866f7..b092bd47e56 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7639,6 +7639,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3bfc, "Lenovo NB0763", ALC883_LENOVO_NB0763), SND_PCI_QUIRK(0x17aa, 0x3bfd, "Lenovo NB0763", ALC883_LENOVO_NB0763), SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2), + SND_PCI_QUIRK(0x17f2, 0x5000, "Albatron KI690-AM2", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66), SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch), {} -- cgit v1.2.3-70-g09d2 From b6a370b6fb3114f9f7fc8a393c3ffc2236d7cbf1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 4 Feb 2008 14:00:53 +0100 Subject: [ALSA] intel8x0 - Add quirk for Acer Travelmate 2310 Added ac97_quirk=hp-only for Acer Travelmate 2310. ALSA bug#3656 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3656 Signed-off-by: Takashi Iwai --- sound/pci/intel8x0.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 061072c7db0..c5ef12ae3c5 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1738,6 +1738,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { .name = "IBM NetVista A30p", /* AD1981B */ .type = AC97_TUNE_HP_ONLY }, + { + .subvendor = 0x1025, + .subdevice = 0x0082, + .name = "Acer Travelmate 2310", + .type = AC97_TUNE_HP_ONLY + }, { .subvendor = 0x1025, .subdevice = 0x0083, -- cgit v1.2.3-70-g09d2 From 31bffaa9435f14b35a8e23ed2005925f65ec6d9b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 27 Feb 2008 16:10:44 +0100 Subject: [ALSA] hda-codec - Fix mixer names of realtek codecs to adapt mater controls Some models like eeepc ep20 have invalid mixer names that aren't handled properly by virtual master controls. Rename them to the proper names. Also fixed some typos in the mixer names but they are not compiled in right now. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b092bd47e56..51871c68457 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3973,8 +3973,8 @@ static struct snd_kcontrol_new alc260_fujitsu_mixer[] = { ALC_PIN_MODE("Mic/Line Jack Mode", 0x12, ALC_PIN_DIR_IN), HDA_CODEC_VOLUME("Beep Playback Volume", 0x07, 0x05, HDA_INPUT), HDA_CODEC_MUTE("Beep Playback Switch", 0x07, 0x05, HDA_INPUT), - HDA_CODEC_VOLUME("Internal Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE("Internal Speaker Playback Switch", 0x09, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Speaker Playback Volume", 0x09, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Speaker Playback Switch", 0x09, 2, HDA_INPUT), { } /* end */ }; @@ -4005,9 +4005,9 @@ static struct snd_kcontrol_new alc260_acer_mixer[] = { HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT), ALC_PIN_MODE("Headphone Jack Mode", 0x0f, ALC_PIN_DIR_INOUT), - HDA_CODEC_VOLUME_MONO("Mono Speaker Playback Volume", 0x0a, 1, 0x0, + HDA_CODEC_VOLUME_MONO("Speaker Playback Volume", 0x0a, 1, 0x0, HDA_OUTPUT), - HDA_BIND_MUTE_MONO("Mono Speaker Playback Switch", 0x0a, 1, 2, + HDA_BIND_MUTE_MONO("Speaker Playback Switch", 0x0a, 1, 2, HDA_INPUT), HDA_CODEC_VOLUME("CD Playback Volume", 0x07, 0x04, HDA_INPUT), HDA_CODEC_MUTE("CD Playback Switch", 0x07, 0x04, HDA_INPUT), @@ -8103,7 +8103,7 @@ static struct snd_kcontrol_new alc262_base_mixer[] = { HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), /* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Beelp Playback Switch", 0x0b, 0x05, HDA_INPUT), */ + HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT), */ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME_MONO("Mono Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT), @@ -8125,7 +8125,7 @@ static struct snd_kcontrol_new alc262_hippo1_mixer[] = { HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT), /* HDA_CODEC_VOLUME("PC Beep Playback Volume", 0x0b, 0x05, HDA_INPUT), - HDA_CODEC_MUTE("PC Beelp Playback Switch", 0x0b, 0x05, HDA_INPUT), */ + HDA_CODEC_MUTE("PC Beep Playback Switch", 0x0b, 0x05, HDA_INPUT), */ /*HDA_CODEC_VOLUME("Headphone Playback Volume", 0x0D, 0x0, HDA_OUTPUT),*/ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), { } /* end */ @@ -13009,8 +13009,8 @@ static struct snd_kcontrol_new alc662_eeepc_p701_mixer[] = { }; static struct snd_kcontrol_new alc662_eeepc_ep20_mixer[] = { - HDA_CODEC_VOLUME("LineOut Playback Volume", 0x02, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("LineOut Playback Switch", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x02, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Line-Out Playback Switch", 0x14, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("Surround Playback Volume", 0x03, 0x0, HDA_OUTPUT), HDA_BIND_MUTE("Surround Playback Switch", 0x03, 2, HDA_INPUT), HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x04, 1, 0x0, HDA_OUTPUT), -- cgit v1.2.3-70-g09d2 From 338c7ed070bb1e068c3ae8ef14dc577e75d8aecc Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 28 Feb 2008 12:34:48 +0100 Subject: [ALSA] ASoC: Fix DAPM widget function types in pxa machine drivers Add kcontrol argument to functions since the API was changed by the commit 9af6d9562414568ecadf96aaef5b88e7e8b19821. Signed-off-by: Jarkko Nikula Signed-off-by: Takashi Iwai --- sound/soc/pxa/corgi.c | 6 ++++-- sound/soc/pxa/poodle.c | 3 ++- sound/soc/pxa/spitz.c | 3 ++- sound/soc/pxa/tosa.c | 3 ++- 4 files changed, 10 insertions(+), 5 deletions(-) diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c index 3f34e531beb..1a70a6ac98c 100644 --- a/sound/soc/pxa/corgi.c +++ b/sound/soc/pxa/corgi.c @@ -215,7 +215,8 @@ static int corgi_set_spk(struct snd_kcontrol *kcontrol, return 1; } -static int corgi_amp_event(struct snd_soc_dapm_widget *w, int event) +static int corgi_amp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) { if (SND_SOC_DAPM_EVENT_ON(event)) set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_APM_ON); @@ -225,7 +226,8 @@ static int corgi_amp_event(struct snd_soc_dapm_widget *w, int event) return 0; } -static int corgi_mic_event(struct snd_soc_dapm_widget *w, int event) +static int corgi_mic_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) { if (SND_SOC_DAPM_EVENT_ON(event)) set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_MIC_BIAS); diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index 5ae59bd309a..4fbf8bba962 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -196,7 +196,8 @@ static int poodle_set_spk(struct snd_kcontrol *kcontrol, return 1; } -static int poodle_amp_event(struct snd_soc_dapm_widget *w, int event) +static int poodle_amp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) { if (SND_SOC_DAPM_EVENT_ON(event)) locomo_gpio_write(&poodle_locomo_device.dev, diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c index d56709e1543..ecca39033fc 100644 --- a/sound/soc/pxa/spitz.c +++ b/sound/soc/pxa/spitz.c @@ -215,7 +215,8 @@ static int spitz_set_spk(struct snd_kcontrol *kcontrol, return 1; } -static int spitz_mic_bias(struct snd_soc_dapm_widget *w, int event) +static int spitz_mic_bias(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) { if (machine_is_borzoi() || machine_is_spitz()) { if (SND_SOC_DAPM_EVENT_ON(event)) diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c index e4d40b528ca..7346d7e5d06 100644 --- a/sound/soc/pxa/tosa.c +++ b/sound/soc/pxa/tosa.c @@ -135,7 +135,8 @@ static int tosa_set_spk(struct snd_kcontrol *kcontrol, } /* tosa dapm event handlers */ -static int tosa_hp_event(struct snd_soc_dapm_widget *w, int event) +static int tosa_hp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) { if (SND_SOC_DAPM_EVENT_ON(event)) set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE); -- cgit v1.2.3-70-g09d2 From 3fffe871b93f957bea443e85f6b221c50bbf9f97 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 28 Feb 2008 12:35:25 +0100 Subject: [ALSA] ASoC: Fix WM9712 mixer_event DAPM widget function type Add kcontrol argument to function since the API was changed by the commit 9af6d9562414568ecadf96aaef5b88e7e8b19821. Signed-off-by: Jarkko Nikula Signed-off-by: Takashi Iwai --- sound/soc/codecs/wm9712.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index 590baea3c4c..524f7450804 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -176,7 +176,8 @@ static int wm9712_add_controls(struct snd_soc_codec *codec) * the codec only has a single control that is shared by both channels. * This makes it impossible to determine the audio path. */ -static int mixer_event (struct snd_soc_dapm_widget *w, int event) +static int mixer_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) { u16 l, r, beep, line, phone, mic, pcm, aux; -- cgit v1.2.3-70-g09d2 From 008f3599ef97438900d62fe05d75535d114780fc Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Fri, 29 Feb 2008 11:46:32 +0100 Subject: [ALSA] sound: ice1712: unused structs Don't need to declare a struct when defining a structure layout. Both of these structs are unused. sound/pci/ice1712/revo.c:39:3: warning: symbol 'revo51' was not declared. Should it be static? sound/pci/ice1712/phase.c:54:3: warning: symbol 'phase28' was not declared. Should it be static? Signed-off-by: Harvey Harrison Signed-off-by: Takashi Iwai --- sound/pci/ice1712/phase.c | 2 +- sound/pci/ice1712/revo.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/ice1712/phase.c b/sound/pci/ice1712/phase.c index 9ab4a9f383c..5a158b73dca 100644 --- a/sound/pci/ice1712/phase.c +++ b/sound/pci/ice1712/phase.c @@ -51,7 +51,7 @@ struct phase28_spec { unsigned short master[2]; unsigned short vol[8]; -} phase28; +}; /* WM8770 registers */ #define WM_DAC_ATTEN 0x00 /* DAC1-8 analog attenuation */ diff --git a/sound/pci/ice1712/revo.c b/sound/pci/ice1712/revo.c index ddd5fc8d4fe..301bf929acd 100644 --- a/sound/pci/ice1712/revo.c +++ b/sound/pci/ice1712/revo.c @@ -36,7 +36,7 @@ struct revo51_spec { struct snd_i2c_device *dev; struct snd_pt2258 *pt2258; -} revo51; +}; static void revo_i2s_mclk_changed(struct snd_ice1712 *ice) { -- cgit v1.2.3-70-g09d2 From b4818494edddfe382de4f5d072cb527b60315a46 Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Sat, 23 Feb 2008 11:34:12 +0100 Subject: [ALSA] hda-codec - Adapt eeepc p701 mixer for virtual master control Fix the line-out volume control of eeepc p701 to be a proper slave of the virtual master control. Signed-off-by: Herton Ronaldo Krzesinski Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 51871c68457..33282f9c01c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12995,8 +12995,8 @@ static struct snd_kcontrol_new alc662_lenovo_101e_mixer[] = { static struct snd_kcontrol_new alc662_eeepc_p701_mixer[] = { HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT), - HDA_CODEC_VOLUME("LineOut Playback Volume", 0x02, 0x0, HDA_OUTPUT), - HDA_CODEC_MUTE("LineOut Playback Switch", 0x1b, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x02, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Line-Out Playback Switch", 0x1b, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("e-Mic Boost", 0x18, 0, HDA_INPUT), HDA_CODEC_VOLUME("e-Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), -- cgit v1.2.3-70-g09d2 From 0d9ac27afa469dbb20940ad7f25502785af1cbe3 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 27 Feb 2008 16:40:18 +0100 Subject: [ALSA] intel8x0 - Add quirk for Compaq Deskpro EN Added the ac97_quirk hp_only for Compaq Deskpro EN. Signed-off-by: Takashi Iwai --- sound/pci/intel8x0.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index c5ef12ae3c5..c52abd0bf22 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1708,6 +1708,12 @@ static struct ac97_pcm ac97_pcm_defs[] __devinitdata = { }; static struct ac97_quirk ac97_quirks[] __devinitdata = { + { + .subvendor = 0x0e11, + .subdevice = 0x000e, + .name = "Compaq Deskpro EN", /* AD1885 */ + .type = AC97_TUNE_HP_ONLY + }, { .subvendor = 0x0e11, .subdevice = 0x008a, -- cgit v1.2.3-70-g09d2 From b59931649256685f294d2d163a4f6d6286fbff05 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Tue, 26 Feb 2008 13:20:58 -0800 Subject: elfcore-compat fix uid/gid types I overlooked the difference between __kernel_uid_t and uid_t when defining struct compat_elf_prpsinfo. The result is a regression in 32-bit core dumps on x86_64, where the NT_PRPSINFO note has the wrong size and layout. This patch fixes it. Signed-off-by: Roland McGrath Acked-by: Ingo Molnar Signed-off-by: Linus Torvalds --- include/linux/elfcore-compat.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/elfcore-compat.h b/include/linux/elfcore-compat.h index 532d13adabc..0a90e1c3a42 100644 --- a/include/linux/elfcore-compat.h +++ b/include/linux/elfcore-compat.h @@ -45,8 +45,8 @@ struct compat_elf_prpsinfo char pr_zomb; char pr_nice; compat_ulong_t pr_flag; - compat_uid_t pr_uid; - compat_gid_t pr_gid; + __compat_uid_t pr_uid; + __compat_gid_t pr_gid; compat_pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid; char pr_fname[16]; char pr_psargs[ELF_PRARGSZ]; -- cgit v1.2.3-70-g09d2 From 32fa458688fa2e68bc433929b2d4941eef7efe39 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 28 Feb 2008 13:29:43 +0000 Subject: Fix hpet_(un)register_irq_handler() for emulation Fix hpet_(un)register_irq_handler() for when CONFIG_HPET_EMULATE_RTC=n. They are provided macros that substitute value 0, but if they are called as functions and the return value isn't checked, the following warnings appear: drivers/char/rtc.c: In function `rtc_init': drivers/char/rtc.c:1063: warning: statement with no effect drivers/char/rtc.c: In function `rtc_exit': drivers/char/rtc.c:1157: warning: statement with no effect Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- drivers/char/rtc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c index 78b151c4d20..5c3142b6f1f 100644 --- a/drivers/char/rtc.c +++ b/drivers/char/rtc.c @@ -110,8 +110,8 @@ static int rtc_has_irq = 1; #define hpet_set_rtc_irq_bit(arg) 0 #define hpet_rtc_timer_init() do { } while (0) #define hpet_rtc_dropped_irq() 0 -#define hpet_register_irq_handler(h) 0 -#define hpet_unregister_irq_handler(h) 0 +#define hpet_register_irq_handler(h) ({ 0; }) +#define hpet_unregister_irq_handler(h) ({ 0; }) #ifdef RTC_IRQ static irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id) { -- cgit v1.2.3-70-g09d2 From 57ce36feb4d1281247755bc445bae77728298955 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 25 Feb 2008 16:45:03 +0100 Subject: let __dec_zone_page_state use __dec_zone_state MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This removes code duplication and makes __dec_zone_page_state look like __inc_zone_page_state. Signed-off-by: Uwe Kleine-König Acked-by: Christoph Lameter Signed-off-by: Linus Torvalds --- include/linux/vmstat.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h index 75370ec0923..9f1b4b46151 100644 --- a/include/linux/vmstat.h +++ b/include/linux/vmstat.h @@ -246,8 +246,7 @@ static inline void __dec_zone_state(struct zone *zone, enum zone_stat_item item) static inline void __dec_zone_page_state(struct page *page, enum zone_stat_item item) { - atomic_long_dec(&page_zone(page)->vm_stat[item]); - atomic_long_dec(&vm_stat[item]); + __dec_zone_state(page_zone(page), item); } /* -- cgit v1.2.3-70-g09d2 From 2232c2d8e0a6a31061dec311f3d1cf7624bc14f1 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 29 Feb 2008 18:46:50 +0100 Subject: rcu: add support for dynamic ticks and preempt rcu The PREEMPT-RCU can get stuck if a CPU goes idle and NO_HZ is set. The idle CPU will not progress the RCU through its grace period and a synchronize_rcu my get stuck. Without this patch I have a box that will not boot when PREEMPT_RCU and NO_HZ are set. That same box boots fine with this patch. This patch comes from the -rt kernel where it has been tested for several months. Signed-off-by: Steven Rostedt Signed-off-by: Paul E. McKenney Signed-off-by: Ingo Molnar --- include/linux/hardirq.h | 10 ++ include/linux/rcuclassic.h | 3 + include/linux/rcupreempt.h | 22 +++++ kernel/rcupreempt.c | 224 ++++++++++++++++++++++++++++++++++++++++++++- kernel/softirq.c | 1 + kernel/time/tick-sched.c | 3 + 6 files changed, 259 insertions(+), 4 deletions(-) diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index 2961ec78804..49829988bfa 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -109,6 +109,14 @@ static inline void account_system_vtime(struct task_struct *tsk) } #endif +#if defined(CONFIG_PREEMPT_RCU) && defined(CONFIG_NO_HZ) +extern void rcu_irq_enter(void); +extern void rcu_irq_exit(void); +#else +# define rcu_irq_enter() do { } while (0) +# define rcu_irq_exit() do { } while (0) +#endif /* CONFIG_PREEMPT_RCU */ + /* * It is safe to do non-atomic ops on ->hardirq_context, * because NMI handlers may not preempt and the ops are @@ -117,6 +125,7 @@ static inline void account_system_vtime(struct task_struct *tsk) */ #define __irq_enter() \ do { \ + rcu_irq_enter(); \ account_system_vtime(current); \ add_preempt_count(HARDIRQ_OFFSET); \ trace_hardirq_enter(); \ @@ -135,6 +144,7 @@ extern void irq_enter(void); trace_hardirq_exit(); \ account_system_vtime(current); \ sub_preempt_count(HARDIRQ_OFFSET); \ + rcu_irq_exit(); \ } while (0) /* diff --git a/include/linux/rcuclassic.h b/include/linux/rcuclassic.h index 4d6624260b4..b3dccd68629 100644 --- a/include/linux/rcuclassic.h +++ b/include/linux/rcuclassic.h @@ -160,5 +160,8 @@ extern void rcu_restart_cpu(int cpu); extern long rcu_batches_completed(void); extern long rcu_batches_completed_bh(void); +#define rcu_enter_nohz() do { } while (0) +#define rcu_exit_nohz() do { } while (0) + #endif /* __KERNEL__ */ #endif /* __LINUX_RCUCLASSIC_H */ diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h index 60c2a033b19..01152ed532c 100644 --- a/include/linux/rcupreempt.h +++ b/include/linux/rcupreempt.h @@ -82,5 +82,27 @@ extern struct rcupreempt_trace *rcupreempt_trace_cpu(int cpu); struct softirq_action; +#ifdef CONFIG_NO_HZ +DECLARE_PER_CPU(long, dynticks_progress_counter); + +static inline void rcu_enter_nohz(void) +{ + __get_cpu_var(dynticks_progress_counter)++; + WARN_ON(__get_cpu_var(dynticks_progress_counter) & 0x1); + mb(); +} + +static inline void rcu_exit_nohz(void) +{ + mb(); + __get_cpu_var(dynticks_progress_counter)++; + WARN_ON(!(__get_cpu_var(dynticks_progress_counter) & 0x1)); +} + +#else /* CONFIG_NO_HZ */ +#define rcu_enter_nohz() do { } while (0) +#define rcu_exit_nohz() do { } while (0) +#endif /* CONFIG_NO_HZ */ + #endif /* __KERNEL__ */ #endif /* __LINUX_RCUPREEMPT_H */ diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c index 987cfb7ade8..c7c52096df4 100644 --- a/kernel/rcupreempt.c +++ b/kernel/rcupreempt.c @@ -23,6 +23,10 @@ * to Suparna Bhattacharya for pushing me completely away * from atomic instructions on the read side. * + * - Added handling of Dynamic Ticks + * Copyright 2007 - Paul E. Mckenney + * - Steven Rostedt + * * Papers: http://www.rdrop.com/users/paulmck/RCU * * Design Document: http://lwn.net/Articles/253651/ @@ -409,6 +413,212 @@ static void __rcu_advance_callbacks(struct rcu_data *rdp) } } +#ifdef CONFIG_NO_HZ + +DEFINE_PER_CPU(long, dynticks_progress_counter) = 1; +static DEFINE_PER_CPU(long, rcu_dyntick_snapshot); +static DEFINE_PER_CPU(int, rcu_update_flag); + +/** + * rcu_irq_enter - Called from Hard irq handlers and NMI/SMI. + * + * If the CPU was idle with dynamic ticks active, this updates the + * dynticks_progress_counter to let the RCU handling know that the + * CPU is active. + */ +void rcu_irq_enter(void) +{ + int cpu = smp_processor_id(); + + if (per_cpu(rcu_update_flag, cpu)) + per_cpu(rcu_update_flag, cpu)++; + + /* + * Only update if we are coming from a stopped ticks mode + * (dynticks_progress_counter is even). + */ + if (!in_interrupt() && + (per_cpu(dynticks_progress_counter, cpu) & 0x1) == 0) { + /* + * The following might seem like we could have a race + * with NMI/SMIs. But this really isn't a problem. + * Here we do a read/modify/write, and the race happens + * when an NMI/SMI comes in after the read and before + * the write. But NMI/SMIs will increment this counter + * twice before returning, so the zero bit will not + * be corrupted by the NMI/SMI which is the most important + * part. + * + * The only thing is that we would bring back the counter + * to a postion that it was in during the NMI/SMI. + * But the zero bit would be set, so the rest of the + * counter would again be ignored. + * + * On return from the IRQ, the counter may have the zero + * bit be 0 and the counter the same as the return from + * the NMI/SMI. If the state machine was so unlucky to + * see that, it still doesn't matter, since all + * RCU read-side critical sections on this CPU would + * have already completed. + */ + per_cpu(dynticks_progress_counter, cpu)++; + /* + * The following memory barrier ensures that any + * rcu_read_lock() primitives in the irq handler + * are seen by other CPUs to follow the above + * increment to dynticks_progress_counter. This is + * required in order for other CPUs to correctly + * determine when it is safe to advance the RCU + * grace-period state machine. + */ + smp_mb(); /* see above block comment. */ + /* + * Since we can't determine the dynamic tick mode from + * the dynticks_progress_counter after this routine, + * we use a second flag to acknowledge that we came + * from an idle state with ticks stopped. + */ + per_cpu(rcu_update_flag, cpu)++; + /* + * If we take an NMI/SMI now, they will also increment + * the rcu_update_flag, and will not update the + * dynticks_progress_counter on exit. That is for + * this IRQ to do. + */ + } +} + +/** + * rcu_irq_exit - Called from exiting Hard irq context. + * + * If the CPU was idle with dynamic ticks active, update the + * dynticks_progress_counter to put let the RCU handling be + * aware that the CPU is going back to idle with no ticks. + */ +void rcu_irq_exit(void) +{ + int cpu = smp_processor_id(); + + /* + * rcu_update_flag is set if we interrupted the CPU + * when it was idle with ticks stopped. + * Once this occurs, we keep track of interrupt nesting + * because a NMI/SMI could also come in, and we still + * only want the IRQ that started the increment of the + * dynticks_progress_counter to be the one that modifies + * it on exit. + */ + if (per_cpu(rcu_update_flag, cpu)) { + if (--per_cpu(rcu_update_flag, cpu)) + return; + + /* This must match the interrupt nesting */ + WARN_ON(in_interrupt()); + + /* + * If an NMI/SMI happens now we are still + * protected by the dynticks_progress_counter being odd. + */ + + /* + * The following memory barrier ensures that any + * rcu_read_unlock() primitives in the irq handler + * are seen by other CPUs to preceed the following + * increment to dynticks_progress_counter. This + * is required in order for other CPUs to determine + * when it is safe to advance the RCU grace-period + * state machine. + */ + smp_mb(); /* see above block comment. */ + per_cpu(dynticks_progress_counter, cpu)++; + WARN_ON(per_cpu(dynticks_progress_counter, cpu) & 0x1); + } +} + +static void dyntick_save_progress_counter(int cpu) +{ + per_cpu(rcu_dyntick_snapshot, cpu) = + per_cpu(dynticks_progress_counter, cpu); +} + +static inline int +rcu_try_flip_waitack_needed(int cpu) +{ + long curr; + long snap; + + curr = per_cpu(dynticks_progress_counter, cpu); + snap = per_cpu(rcu_dyntick_snapshot, cpu); + smp_mb(); /* force ordering with cpu entering/leaving dynticks. */ + + /* + * If the CPU remained in dynticks mode for the entire time + * and didn't take any interrupts, NMIs, SMIs, or whatever, + * then it cannot be in the middle of an rcu_read_lock(), so + * the next rcu_read_lock() it executes must use the new value + * of the counter. So we can safely pretend that this CPU + * already acknowledged the counter. + */ + + if ((curr == snap) && ((curr & 0x1) == 0)) + return 0; + + /* + * If the CPU passed through or entered a dynticks idle phase with + * no active irq handlers, then, as above, we can safely pretend + * that this CPU already acknowledged the counter. + */ + + if ((curr - snap) > 2 || (snap & 0x1) == 0) + return 0; + + /* We need this CPU to explicitly acknowledge the counter flip. */ + + return 1; +} + +static inline int +rcu_try_flip_waitmb_needed(int cpu) +{ + long curr; + long snap; + + curr = per_cpu(dynticks_progress_counter, cpu); + snap = per_cpu(rcu_dyntick_snapshot, cpu); + smp_mb(); /* force ordering with cpu entering/leaving dynticks. */ + + /* + * If the CPU remained in dynticks mode for the entire time + * and didn't take any interrupts, NMIs, SMIs, or whatever, + * then it cannot have executed an RCU read-side critical section + * during that time, so there is no need for it to execute a + * memory barrier. + */ + + if ((curr == snap) && ((curr & 0x1) == 0)) + return 0; + + /* + * If the CPU either entered or exited an outermost interrupt, + * SMI, NMI, or whatever handler, then we know that it executed + * a memory barrier when doing so. So we don't need another one. + */ + if (curr != snap) + return 0; + + /* We need the CPU to execute a memory barrier. */ + + return 1; +} + +#else /* !CONFIG_NO_HZ */ + +# define dyntick_save_progress_counter(cpu) do { } while (0) +# define rcu_try_flip_waitack_needed(cpu) (1) +# define rcu_try_flip_waitmb_needed(cpu) (1) + +#endif /* CONFIG_NO_HZ */ + /* * Get here when RCU is idle. Decide whether we need to * move out of idle state, and return non-zero if so. @@ -447,8 +657,10 @@ rcu_try_flip_idle(void) /* Now ask each CPU for acknowledgement of the flip. */ - for_each_cpu_mask(cpu, rcu_cpu_online_map) + for_each_cpu_mask(cpu, rcu_cpu_online_map) { per_cpu(rcu_flip_flag, cpu) = rcu_flipped; + dyntick_save_progress_counter(cpu); + } return 1; } @@ -464,7 +676,8 @@ rcu_try_flip_waitack(void) RCU_TRACE_ME(rcupreempt_trace_try_flip_a1); for_each_cpu_mask(cpu, rcu_cpu_online_map) - if (per_cpu(rcu_flip_flag, cpu) != rcu_flip_seen) { + if (rcu_try_flip_waitack_needed(cpu) && + per_cpu(rcu_flip_flag, cpu) != rcu_flip_seen) { RCU_TRACE_ME(rcupreempt_trace_try_flip_ae1); return 0; } @@ -509,8 +722,10 @@ rcu_try_flip_waitzero(void) smp_mb(); /* ^^^^^^^^^^^^ */ /* Call for a memory barrier from each CPU. */ - for_each_cpu_mask(cpu, rcu_cpu_online_map) + for_each_cpu_mask(cpu, rcu_cpu_online_map) { per_cpu(rcu_mb_flag, cpu) = rcu_mb_needed; + dyntick_save_progress_counter(cpu); + } RCU_TRACE_ME(rcupreempt_trace_try_flip_z2); return 1; @@ -528,7 +743,8 @@ rcu_try_flip_waitmb(void) RCU_TRACE_ME(rcupreempt_trace_try_flip_m1); for_each_cpu_mask(cpu, rcu_cpu_online_map) - if (per_cpu(rcu_mb_flag, cpu) != rcu_mb_done) { + if (rcu_try_flip_waitmb_needed(cpu) && + per_cpu(rcu_mb_flag, cpu) != rcu_mb_done) { RCU_TRACE_ME(rcupreempt_trace_try_flip_me1); return 0; } diff --git a/kernel/softirq.c b/kernel/softirq.c index 5b3aea5f471..31e9f2a4792 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -313,6 +313,7 @@ void irq_exit(void) /* Make sure that timer wheel updates are propagated */ if (!in_interrupt() && idle_cpu(smp_processor_id()) && !need_resched()) tick_nohz_stop_sched_tick(); + rcu_irq_exit(); #endif preempt_enable_no_resched(); } diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index fa9bb73dbdb..2968298f8f3 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -282,6 +282,7 @@ void tick_nohz_stop_sched_tick(void) ts->idle_tick = ts->sched_timer.expires; ts->tick_stopped = 1; ts->idle_jiffies = last_jiffies; + rcu_enter_nohz(); } /* @@ -375,6 +376,8 @@ void tick_nohz_restart_sched_tick(void) return; } + rcu_exit_nohz(); + /* Update jiffies first */ select_nohz_load_balancer(0); now = ktime_get(); -- cgit v1.2.3-70-g09d2 From 7be2a03e3174cee3a3cdcdf17db357470f51caff Mon Sep 17 00:00:00 2001 From: Dmitry Adamushko Date: Fri, 8 Feb 2008 15:41:13 +0100 Subject: softlockup: fix task state setting kthread_stop() can be called when a 'watchdog' thread is executing after kthread_should_stop() but before set_task_state(TASK_INTERRUPTIBLE). Signed-off-by: Dmitry Adamushko Signed-off-by: Ingo Molnar --- kernel/softlockup.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/kernel/softlockup.c b/kernel/softlockup.c index 7c2da88db4e..01b6522fd92 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -216,26 +216,27 @@ static int watchdog(void *__bind_cpu) /* initialize timestamp */ touch_softlockup_watchdog(); + set_current_state(TASK_INTERRUPTIBLE); /* * Run briefly once per second to reset the softlockup timestamp. * If this gets delayed for more than 60 seconds then the * debug-printout triggers in softlockup_tick(). */ while (!kthread_should_stop()) { - set_current_state(TASK_INTERRUPTIBLE); touch_softlockup_watchdog(); schedule(); if (kthread_should_stop()) break; - if (this_cpu != check_cpu) - continue; - - if (sysctl_hung_task_timeout_secs) - check_hung_uninterruptible_tasks(this_cpu); + if (this_cpu == check_cpu) { + if (sysctl_hung_task_timeout_secs) + check_hung_uninterruptible_tasks(this_cpu); + } + set_current_state(TASK_INTERRUPTIBLE); } + __set_current_state(TASK_RUNNING); return 0; } -- cgit v1.2.3-70-g09d2 From 3d00daf44654dc75629caf42816ac4e293658724 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Tue, 26 Feb 2008 13:00:18 -0800 Subject: x86: tls prevent_tail_call Fix a kernel bug (vmware boot problem) reported by Tomasz Grobelny, which occurs with certain .config variants and gccs. The x86 TLS cleanup in commit efd1ca52d04d2f6df337a3332cee56cd60e6d4c4 made the sys_set_thread_area and sys_get_thread_area functions ripe for tail call optimization. If the compiler chooses to use it for them, it can clobber the user trap frame because these are asmlinkage functions. Reported-by: Tomasz Grobelny Signed-off-by: Roland McGrath Signed-off-by: Ingo Molnar --- arch/x86/kernel/tls.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/tls.c b/arch/x86/kernel/tls.c index 6dfd4e76661..022bcaa3b42 100644 --- a/arch/x86/kernel/tls.c +++ b/arch/x86/kernel/tls.c @@ -91,7 +91,9 @@ int do_set_thread_area(struct task_struct *p, int idx, asmlinkage int sys_set_thread_area(struct user_desc __user *u_info) { - return do_set_thread_area(current, -1, u_info, 1); + int ret = do_set_thread_area(current, -1, u_info, 1); + prevent_tail_call(ret); + return ret; } @@ -139,7 +141,9 @@ int do_get_thread_area(struct task_struct *p, int idx, asmlinkage int sys_get_thread_area(struct user_desc __user *u_info) { - return do_get_thread_area(current, -1, u_info); + int ret = do_get_thread_area(current, -1, u_info); + prevent_tail_call(ret); + return ret; } int regset_tls_active(struct task_struct *target, -- cgit v1.2.3-70-g09d2 From cded932b75ab0a5f9181ee3da34a0a488d1a14fd Mon Sep 17 00:00:00 2001 From: Hans Rosenfeld Date: Mon, 18 Feb 2008 18:10:47 +0100 Subject: x86: fix pmd_bad and pud_bad to support huge pages I recently stumbled upon a problem in the support for huge pages. If a program using huge pages does not explicitly unmap them, they remain mapped (and therefore, are lost) after the program exits. I observed that the free huge page count in /proc/meminfo decreased when running my program, and it did not increase after the program exited. After running the program a few times, no more huge pages could be allocated. The reason for this seems to be that the x86 pmd_bad and pud_bad consider pmd/pud entries having the PSE bit set invalid. I think there is nothing wrong with this bit being set, it just indicates that the lowest level of translation has been reached. This bit has to be (and is) checked after the basic validity of the entry has been checked, like in this fragment from follow_page() in mm/memory.c: if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) goto no_page_table; if (pmd_huge(*pmd)) { BUG_ON(flags & FOLL_GET); page = follow_huge_pmd(mm, address, pmd, flags & FOLL_WRITE); goto out; } Note that this code currently doesn't work as intended if the pmd refers to a huge page, the pmd_huge() check can not be reached if the page is huge. Extending pmd_bad() (and, for future 1GB page support, pud_bad()) to allow for the PSE bit being set fixes this. For similar reasons, allowing the NX bit being set is necessary, too. I have seen huge pages having the NX bit set in their pmd entry, which would cause the same problem. Signed-Off-By: Hans Rosenfeld Signed-off-by: Ingo Molnar --- include/asm-x86/pgtable_32.h | 4 +++- include/asm-x86/pgtable_64.h | 6 ++++-- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h index a842c7222b1..b478efa971e 100644 --- a/include/asm-x86/pgtable_32.h +++ b/include/asm-x86/pgtable_32.h @@ -91,7 +91,9 @@ extern unsigned long pg0[]; /* To avoid harmful races, pmd_none(x) should check only the lower when PAE */ #define pmd_none(x) (!(unsigned long)pmd_val(x)) #define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) -#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) +#define pmd_bad(x) ((pmd_val(x) \ + & ~(PAGE_MASK | _PAGE_USER | _PAGE_PSE | _PAGE_NX)) \ + != _KERNPG_TABLE) #define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h index 0a0b77bc736..0a9258333cb 100644 --- a/include/asm-x86/pgtable_64.h +++ b/include/asm-x86/pgtable_64.h @@ -153,12 +153,14 @@ static inline unsigned long pgd_bad(pgd_t pgd) static inline unsigned long pud_bad(pud_t pud) { - return pud_val(pud) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER); + return pud_val(pud) & + ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX); } static inline unsigned long pmd_bad(pmd_t pmd) { - return pmd_val(pmd) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER); + return pmd_val(pmd) & + ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX); } #define pte_none(x) (!pte_val(x)) -- cgit v1.2.3-70-g09d2 From d67bbacb4b557ece3b41abdcb616354ac0ce00e1 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 27 Feb 2008 09:39:52 +0100 Subject: x86: restore vsyscall64 prochandler a recent fix: commit ce28b9864b853803320c3f1d8de1b81aa4120b14 Author: Thomas Gleixner Date: Wed Feb 20 23:57:30 2008 +0100 x86: fix vsyscall wreckage removed the broken /kernel/vsyscall64 handler completely. This triggers the following debug check: sysctl table check failed: /kernel/vsyscall64 No proc_handler Restore the sane part of the proc handler. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/vsyscall_64.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index b6be812fac0..edff4c98548 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -222,10 +222,19 @@ long __vsyscall(3) venosys_1(void) } #ifdef CONFIG_SYSCTL + +static int +vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + return proc_dointvec(ctl, write, filp, buffer, lenp, ppos); +} + static ctl_table kernel_table2[] = { { .procname = "vsyscall64", .data = &vsyscall_gtod_data.sysctl_enabled, .maxlen = sizeof(int), - .mode = 0644 }, + .mode = 0644, + .proc_handler = vsyscall_sysctl_change }, {} }; -- cgit v1.2.3-70-g09d2 From f2dbe03dccc95f41429d60e4221b02fc0f112cc4 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Wed, 27 Feb 2008 11:42:15 -0800 Subject: x86 vdso: fix build locale dependency Priit Laes discovered that the sed command processing nm output was sensitive to locale settings. This was addressed in commit 03994f01e8b72b3d01fd3d09d1cc7c9f421a727c by using [:alnum:] in place of [a-zA-Z0-9]. But that solution too is locale-dependent and may not always match the identifiers it needs to. The better fix is just to run sed et al with a fixed locale setting in all builds. Signed-off-by: Roland McGrath CC: Priit Laes Signed-off-by: Ingo Molnar --- arch/x86/vdso/Makefile | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile index b8bd0c4aa02..0a8f4742ef5 100644 --- a/arch/x86/vdso/Makefile +++ b/arch/x86/vdso/Makefile @@ -48,9 +48,11 @@ obj-$(VDSO64-y) += vdso-syms.lds # Match symbols in the DSO that look like VDSO*; produce a file of constants. # sed-vdsosym := -e 's/^00*/0/' \ - -e 's/^\([[:xdigit:]]*\) . \(VDSO[[:alnum:]_]*\)$$/\2 = 0x\1;/p' + -e 's/^\([0-9a-fA-F]*\) . \(VDSO[a-zA-Z0-9_]*\)$$/\2 = 0x\1;/p' quiet_cmd_vdsosym = VDSOSYM $@ - cmd_vdsosym = $(NM) $< | sed -n $(sed-vdsosym) | LC_ALL=C sort > $@ +define cmd_vdsosym + $(NM) $< | LC_ALL=C sed -n $(sed-vdsosym) | LC_ALL=C sort > $@ +endef $(obj)/%-syms.lds: $(obj)/%.so.dbg FORCE $(call if_changed,vdsosym) -- cgit v1.2.3-70-g09d2 From b16bf712f491808a8c926dd481c696fe7d73ee5a Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 28 Feb 2008 14:02:08 +0100 Subject: x86: fix leak un ioremap_page_range() failure Jan Beulich noticed it during code review that if a driver's ioremap() fails (say due to -ENOMEM) then we might leak the struct vm_area. Free it properly. Signed-off-by: Ingo Molnar --- arch/x86/mm/ioremap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 882328efc3d..ac3c959e271 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -162,7 +162,7 @@ static void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, area->phys_addr = phys_addr; vaddr = (unsigned long) area->addr; if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) { - remove_vm_area((void *)(vaddr & PAGE_MASK)); + free_vm_area(area); return NULL; } -- cgit v1.2.3-70-g09d2 From 757265b8c57bb8fd91785d3d1a87fb483c86c9c2 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 28 Feb 2008 20:19:06 +0100 Subject: x86: delay the export removal of init_mm delay the removal of this symbol export by one more kernel release, giving external modules such as VirtualBox a chance to stop using it. Signed-off-by: Ingo Molnar --- Documentation/feature-removal-schedule.txt | 12 ++++++++++++ arch/x86/kernel/init_task.c | 1 + 2 files changed, 13 insertions(+) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index ba899ff2a8f..c1d1fd0c299 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -316,3 +316,15 @@ Why: Largely unmaintained and almost entirely unused. File system is largely pointless as without a lot of work only the most trivial of Solaris binaries can work with the emulation code. Who: David S. Miller + +--------------------------- + +What: init_mm export +When: 2.6.26 +Why: Not used in-tree. The current out-of-tree users used it to + work around problems in the CPA code which should be resolved + by now. One usecase was described to provide verification code + of the CPA operation. That's a good idea in general, but such + code / infrastructure should be in the kernel and not in some + out-of-tree driver. +Who: Thomas Gleixner diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c index 5b3ce793436..3d01e47777d 100644 --- a/arch/x86/kernel/init_task.c +++ b/arch/x86/kernel/init_task.c @@ -15,6 +15,7 @@ static struct files_struct init_files = INIT_FILES; static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); struct mm_struct init_mm = INIT_MM(init_mm); +EXPORT_UNUSED_SYMBOL(init_mm); /* will be removed in 2.6.26 */ /* * Initial thread structure. -- cgit v1.2.3-70-g09d2 From 8be8f54bae3453588011cad06363813a5293af53 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 23 Feb 2008 20:43:21 +0100 Subject: x86: CPA: avoid split of alias mappings avoid over-eager large page splitup. When the target area needs to be split or is split already (ioremap) then the current code enforces the split of large mappings in the alias regions even if we could avoid it. Use a separate variable processed in the cpa_data structure to carry the number of pages which have been processed instead of reusing the numpages variable. This keeps numpages intact and gives the alias code a chance to keep large mappings intact. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/pageattr.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 14e48b5a94b..7049294fb46 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -26,6 +26,7 @@ struct cpa_data { pgprot_t mask_set; pgprot_t mask_clr; int numpages; + int processed; int flushtlb; unsigned long pfn; }; @@ -290,8 +291,8 @@ try_preserve_large_page(pte_t *kpte, unsigned long address, */ nextpage_addr = (address + psize) & pmask; numpages = (nextpage_addr - address) >> PAGE_SHIFT; - if (numpages < cpa->numpages) - cpa->numpages = numpages; + if (numpages < cpa->processed) + cpa->processed = numpages; /* * We are safe now. Check whether the new pgprot is the same: @@ -318,7 +319,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address, */ addr = address + PAGE_SIZE; pfn++; - for (i = 1; i < cpa->numpages; i++, addr += PAGE_SIZE, pfn++) { + for (i = 1; i < cpa->processed; i++, addr += PAGE_SIZE, pfn++) { pgprot_t chk_prot = static_protections(new_prot, addr, pfn); if (pgprot_val(chk_prot) != pgprot_val(new_prot)) @@ -342,7 +343,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address, * that we limited the number of possible pages already to * the number of pages in the large page. */ - if (address == (nextpage_addr - psize) && cpa->numpages == numpages) { + if (address == (nextpage_addr - psize) && cpa->processed == numpages) { /* * The address is aligned and the number of pages * covers the full page. @@ -572,7 +573,7 @@ repeat: set_pte_atomic(kpte, new_pte); cpa->flushtlb = 1; } - cpa->numpages = 1; + cpa->processed = 1; return 0; } @@ -583,7 +584,7 @@ repeat: do_split = try_preserve_large_page(kpte, address, cpa); /* * When the range fits into the existing large page, - * return. cp->numpages and cpa->tlbflush have been updated in + * return. cp->processed and cpa->tlbflush have been updated in * try_large_page: */ if (do_split <= 0) @@ -662,7 +663,7 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias) * Store the remaining nr of pages for the large page * preservation check. */ - cpa->numpages = numpages; + cpa->numpages = cpa->processed = numpages; ret = __change_page_attr(cpa, checkalias); if (ret) @@ -679,9 +680,9 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias) * CPA operation. Either a large page has been * preserved or a single page update happened. */ - BUG_ON(cpa->numpages > numpages); - numpages -= cpa->numpages; - cpa->vaddr += cpa->numpages * PAGE_SIZE; + BUG_ON(cpa->processed > numpages); + numpages -= cpa->processed; + cpa->vaddr += cpa->processed * PAGE_SIZE; } return 0; } -- cgit v1.2.3-70-g09d2 From b4ef95de00be4c2c30feccf607a45093c8c118b7 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 26 Feb 2008 09:40:27 +0100 Subject: x86: disable BTS ptrace extensions for now revert the BTS ptrace extension for now. based on general objections from Roland McGrath: http://lkml.org/lkml/2008/2/21/323 we'll let the BTS functionality cook some more and re-enable it in v2.6.26. We'll leave the dead code around to help the development of this code. (X86_BTS is not defined at the moment) Signed-off-by: Ingo Molnar --- arch/x86/kernel/process_32.c | 2 ++ arch/x86/kernel/process_64.c | 2 ++ arch/x86/kernel/ptrace.c | 12 ++++++++++++ 3 files changed, 16 insertions(+) diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index a7d50a547dc..be3c7a299f0 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -603,11 +603,13 @@ __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p, } #endif +#ifdef X86_BTS if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS)) ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS); if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS)) ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES); +#endif if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) { diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 43f287744f9..3baf9b9f4c8 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -604,11 +604,13 @@ static inline void __switch_to_xtra(struct task_struct *prev_p, memset(tss->io_bitmap, 0xff, prev->io_bitmap_max); } +#ifdef X86_BTS if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS)) ptrace_bts_take_timestamp(prev_p, BTS_TASK_DEPARTS); if (test_tsk_thread_flag(next_p, TIF_BTS_TRACE_TS)) ptrace_bts_take_timestamp(next_p, BTS_TASK_ARRIVES); +#endif } /* diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index d862e396b09..f41fdc98efb 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -544,6 +544,8 @@ static int ptrace_set_debugreg(struct task_struct *child, return 0; } +#ifdef X86_BTS + static int ptrace_bts_get_size(struct task_struct *child) { if (!child->thread.ds_area_msr) @@ -826,6 +828,7 @@ void ptrace_bts_take_timestamp(struct task_struct *tsk, ptrace_bts_write_record(tsk, &rec); } +#endif /* X86_BTS */ /* * Called by kernel/ptrace.c when detaching.. @@ -839,7 +842,9 @@ void ptrace_disable(struct task_struct *child) clear_tsk_thread_flag(child, TIF_SYSCALL_EMU); #endif if (child->thread.ds_area_msr) { +#ifdef X86_BTS ptrace_bts_realloc(child, 0, 0); +#endif child->thread.debugctlmsr &= ~ds_debugctl_mask(); if (!child->thread.debugctlmsr) clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR); @@ -961,6 +966,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; #endif + /* + * These bits need more cooking - not enabled yet: + */ +#ifdef X86_BTS case PTRACE_BTS_CONFIG: ret = ptrace_bts_config (child, data, (struct ptrace_bts_config __user *)addr); @@ -988,6 +997,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) ret = ptrace_bts_drain (child, data, (struct bts_struct __user *) addr); break; +#endif default: ret = ptrace_request(child, request, addr, data); @@ -1226,12 +1236,14 @@ asmlinkage long sys32_ptrace(long request, u32 pid, u32 addr, u32 data) case PTRACE_SETOPTIONS: case PTRACE_SET_THREAD_AREA: case PTRACE_GET_THREAD_AREA: +#ifdef X86_BTS case PTRACE_BTS_CONFIG: case PTRACE_BTS_STATUS: case PTRACE_BTS_SIZE: case PTRACE_BTS_GET: case PTRACE_BTS_CLEAR: case PTRACE_BTS_DRAIN: +#endif return sys_ptrace(request, pid, addr, data); default: -- cgit v1.2.3-70-g09d2 From 53c58588107973c0e240a1ed4fb8295f274c409d Mon Sep 17 00:00:00 2001 From: Dave Anderson Date: Thu, 21 Feb 2008 11:45:38 -0500 Subject: x86 ptrace: fix ptrace_bts_config structure declaration The 2.6.25 ptrace_bts_config structure in asm-x86/ptrace-abi.h is defined with u32 types: #include /* configuration/status structure used in PTRACE_BTS_CONFIG and PTRACE_BTS_STATUS commands. */ struct ptrace_bts_config { /* requested or actual size of BTS buffer in bytes */ u32 size; /* bitmask of below flags */ u32 flags; /* buffer overflow signal */ u32 signal; /* actual size of bts_struct in bytes */ u32 bts_size; }; #endif But u32 is only accessible in asm-x86/types.h if __KERNEL__, leading to compile errors when ptrace.h is included from user-space. The double-underscore versions that are exported to user-space in asm-x86/types.h should be used instead. Signed-off-by: Dave Anderson Signed-off-by: Ingo Molnar --- include/asm-x86/ptrace-abi.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/asm-x86/ptrace-abi.h b/include/asm-x86/ptrace-abi.h index 81a8ee4c55f..f224eb3c315 100644 --- a/include/asm-x86/ptrace-abi.h +++ b/include/asm-x86/ptrace-abi.h @@ -89,13 +89,13 @@ */ struct ptrace_bts_config { /* requested or actual size of BTS buffer in bytes */ - u32 size; + __u32 size; /* bitmask of below flags */ - u32 flags; + __u32 flags; /* buffer overflow signal */ - u32 signal; + __u32 signal; /* actual size of bts_struct in bytes */ - u32 bts_size; + __u32 bts_size; }; #endif -- cgit v1.2.3-70-g09d2 From d40e705903397445c6861a0a56c23e5b2e8f9b9a Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 29 Feb 2008 18:55:43 +0100 Subject: xen: mask out SEP from CPUID Fix 32-on-64 pvops kernel: we don't want userspace using syscall/sysenter, even if the hypervisor supports it, so mask it out from CPUID. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 49e5358f481..8b9ee27805f 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -153,6 +153,7 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, if (*ax == 1) maskedx = ~((1 << X86_FEATURE_APIC) | /* disable APIC */ (1 << X86_FEATURE_ACPI) | /* disable ACPI */ + (1 << X86_FEATURE_SEP) | /* disable SEP */ (1 << X86_FEATURE_ACC)); /* thermal monitoring */ asm(XEN_EMULATE_PREFIX "cpuid" -- cgit v1.2.3-70-g09d2 From ae778869ae4549628b9e83efe958c3aaa63ed1b9 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 27 Feb 2008 16:21:10 -0800 Subject: rcupreempt: fix hibernate/resume in presence of PREEMPT_RCU and hotplug This fixes a oops encountered when doing hibernate/resume in presence of PREEMPT_RCU. The problem was that the code failed to disable preemption when accessing a per-CPU variable. This is OK when called from code that already has preemption disabled, but such is not the case from the suspend/resume code path. Reported-by: Dave Young Tested-by: Dave Young Signed-off-by: Paul E. McKenney Signed-off-by: Ingo Molnar --- kernel/rcupreempt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c index c7c52096df4..845abcd472b 100644 --- a/kernel/rcupreempt.c +++ b/kernel/rcupreempt.c @@ -918,8 +918,9 @@ void rcu_offline_cpu(int cpu) * fix. */ + local_irq_save(flags); rdp = RCU_DATA_ME(); - spin_lock_irqsave(&rdp->lock, flags); + spin_lock(&rdp->lock); *rdp->nexttail = list; if (list) rdp->nexttail = tail; -- cgit v1.2.3-70-g09d2 From c9e71002aacc9821e99531dcc130db88bbc8ad05 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 28 Feb 2008 11:51:07 -0800 Subject: rcupreempt: remove never-migrates assumption from rcu_process_callbacks() This patch fixes a potentially invalid access to a per-CPU variable in rcu_process_callbacks(). This per-CPU access needs to be done in such a way as to guarantee that the code using it cannot move to some other CPU before all uses of the value accessed have completed. Even though this code is currently only invoked from softirq context, which currrently cannot migrate to some other CPU, life would be better if this code did not silently make such an assumption. Signed-off-by: Paul E. McKenney Signed-off-by: Ingo Molnar --- kernel/rcupreempt.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c index 845abcd472b..e9517014b57 100644 --- a/kernel/rcupreempt.c +++ b/kernel/rcupreempt.c @@ -952,9 +952,11 @@ static void rcu_process_callbacks(struct softirq_action *unused) { unsigned long flags; struct rcu_head *next, *list; - struct rcu_data *rdp = RCU_DATA_ME(); + struct rcu_data *rdp; - spin_lock_irqsave(&rdp->lock, flags); + local_irq_save(flags); + rdp = RCU_DATA_ME(); + spin_lock(&rdp->lock); list = rdp->donelist; if (list == NULL) { spin_unlock_irqrestore(&rdp->lock, flags); -- cgit v1.2.3-70-g09d2 From b98d7291883f7ed27e3f4b59bc12dc963c9f72a6 Mon Sep 17 00:00:00 2001 From: Uli Luckas Date: Fri, 22 Feb 2008 16:45:18 +0100 Subject: [ARM] 4836/1: Make ATAGS_PROC depend on KEXEC On Wed, Feb 20, 2008 at 11:50:33AM +0100, Guennadi Liakhovetski wrote: > arch/arm/kernel/atags.c uses for some reason the > KEXEC_BOOT_PARAMS_SIZE macro, which is only defined if CONFIG_KEXEC > is set. So, either this macro should be defined always, or another > macro should be used, or ATAGS_PROC should depend on KEXEC. As the procfs export of ATAGS is not meant as a stable, general purpose ABI it shouldn't be an independent, general configuration option. This patch make ATAGS_PROC depend on KEXEC Signed-off-by: Uli Luckas Signed-off-by: Russell King --- arch/arm/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9619c43783f..16b82e1272b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -939,7 +939,8 @@ config KEXEC config ATAGS_PROC bool "Export atags in procfs" - default n + depends on KEXEC + default y help Should the atags used to boot the kernel be exported in an "atags" file in procfs. Useful with kexec. -- cgit v1.2.3-70-g09d2 From 94a3f78566ef98a48814d82892f28bb741624cb8 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 23 Feb 2008 00:23:48 +0100 Subject: [ARM] 4837/1: make __get_unaligned_*() return unsigned types Eric Sandeen tracked an XFS on ARM corruption bug down to a function under fs/xfs/ involving some get_unaligned() calls on u64 pointers. As it turns out, calling ARM's get_unaligned() on a u64 pointer pointing to the following byte sequence: 80 81 82 83 84 85 86 87 would return ffffffff83828180 (LE mode.) This turns out to be because of implicit u8 -> int promotion in ARM's implementation of various helpers for get_unaligned(), causing them to accidentally return signed instead of unsigned values, which in turn caused the subsequent casts to unsigned long long in __get_unaligned_8_[bl]e() to sign-extend the lower words. Fix by casting the return values of __get_unaligned_[24]_[bl]e() to unsigned int. Cc: Eric Sandeen Cc: Rabeeh Khoury Cc: Nicolas Pitre Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- include/asm-arm/unaligned.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/asm-arm/unaligned.h b/include/asm-arm/unaligned.h index 8431f6eed5c..5db03cf3b90 100644 --- a/include/asm-arm/unaligned.h +++ b/include/asm-arm/unaligned.h @@ -40,16 +40,16 @@ extern int __bug_unaligned_x(const void *ptr); */ #define __get_unaligned_2_le(__p) \ - (__p[0] | __p[1] << 8) + (unsigned int)(__p[0] | __p[1] << 8) #define __get_unaligned_2_be(__p) \ - (__p[0] << 8 | __p[1]) + (unsigned int)(__p[0] << 8 | __p[1]) #define __get_unaligned_4_le(__p) \ - (__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24) + (unsigned int)(__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24) #define __get_unaligned_4_be(__p) \ - (__p[0] << 24 | __p[1] << 16 | __p[2] << 8 | __p[3]) + (unsigned int)(__p[0] << 24 | __p[1] << 16 | __p[2] << 8 | __p[3]) #define __get_unaligned_8_le(__p) \ ((unsigned long long)__get_unaligned_4_le((__p+4)) << 32 | \ -- cgit v1.2.3-70-g09d2 From 5ce94e9e8b469a17fbd3efa1b940c19b5e43449a Mon Sep 17 00:00:00 2001 From: Thomas Kunze Date: Sun, 24 Feb 2008 17:59:34 +0100 Subject: [ARM] 4838/1: Fix kexec for SA1100 machines This patch sets KEXEC_CONTROL_MEMORY_LIMIT to (-1)UL. As the value is compared with physical addresses TASK_SIZE makes no sense. Machines where the RAM addresses start above TASK_SIZE kexecs eats all memory and crashes the kernel without this patch. Signed-off-by: Thomas Kunze Acked-by: Richard Purdie Signed-off-by: Russell King --- include/asm-arm/kexec.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-arm/kexec.h b/include/asm-arm/kexec.h index 1ee17b6951d..47fe34d692d 100644 --- a/include/asm-arm/kexec.h +++ b/include/asm-arm/kexec.h @@ -8,7 +8,7 @@ /* Maximum address we can reach in physical address mode */ #define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) /* Maximum address we can use for the control code buffer */ -#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE +#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL) #define KEXEC_CONTROL_CODE_SIZE 4096 -- cgit v1.2.3-70-g09d2 From c710e39cbec4f3d60acd07f5356404a61bc1959a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 27 Feb 2008 12:11:16 -0800 Subject: [ARM] eliminate MODULE_PARM() usage Convert debug-only (and removed) MODULE_PARM() to module_param(). Compiles cleanly (with DEBUG=1). Signed-off-by: Randy Dunlap Signed-off-by: Russell King --- arch/arm/mach-pxa/cpu-pxa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c index 939a3867f77..4b21479332a 100644 --- a/arch/arm/mach-pxa/cpu-pxa.c +++ b/arch/arm/mach-pxa/cpu-pxa.c @@ -43,7 +43,7 @@ #ifdef DEBUG static unsigned int freq_debug; -MODULE_PARM(freq_debug, "i"); +module_param(freq_debug, uint, 0); MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0"); #else #define freq_debug 0 -- cgit v1.2.3-70-g09d2 From 9ae3ae0bebb9a3a348dc233229008b126014889d Mon Sep 17 00:00:00 2001 From: Alexandre Rusev Date: Tue, 26 Feb 2008 18:42:10 +0100 Subject: [ARM] 4839/1: fixes kernel Oops in /dev/mem device driver for memory map with PHYS_OFF "cat /dev/mem" may cause kernel Oops for boards with PHYS_OFFSET != 0 because character device is mapped to addresses starting from zero and there is no protection against such situation. Patch just add this. Signed-off-by: Alexandre Rusev Signed-off-by: Russell King --- arch/arm/mm/mmap.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 2728b0e7d2b..3f6dc40b835 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -120,6 +120,8 @@ full_search: */ int valid_phys_addr_range(unsigned long addr, size_t size) { + if (addr < PHYS_OFFSET) + return 0; if (addr + size > __pa(high_memory)) return 0; -- cgit v1.2.3-70-g09d2 From a3359e21c06cb5b366fb47307b3d2fd23386a774 Mon Sep 17 00:00:00 2001 From: eric miao Date: Wed, 27 Feb 2008 01:59:28 +0100 Subject: [ARM] 4840/1: pxa: fix the typo in get_irqnr_and_base This typo causes the incorrect calculation of the IRQ numbers in the ICIP2 registers. Signed-off-by: eric miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/entry-macro.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-arm/arch-pxa/entry-macro.S b/include/asm-arm/arch-pxa/entry-macro.S index b7e73085146..c145bb01bc8 100644 --- a/include/asm-arm/arch-pxa/entry-macro.S +++ b/include/asm-arm/arch-pxa/entry-macro.S @@ -35,7 +35,7 @@ 1004: mrc p6, 0, \irqstat, c6, c0, 0 @ ICIP2 mrc p6, 0, \irqnr, c7, c0, 0 @ ICMR2 - ands \irqstat, \irqstat, \irqnr + ands \irqnr, \irqstat, \irqnr beq 1003f rsb \irqstat, \irqnr, #0 and \irqstat, \irqstat, \irqnr -- cgit v1.2.3-70-g09d2 From 7a987e82cd9175215dec6339d383d64e551c8899 Mon Sep 17 00:00:00 2001 From: eric miao Date: Wed, 27 Feb 2008 02:00:26 +0100 Subject: [ARM] 4841/1: pxa: fix typo in LCD platform data definition code for zylonite Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/zylonite.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 7731d50dd86..afd2cbfca0d 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -58,7 +58,7 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; -#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULES) +#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) static void zylonite_backlight_power(int on) { gpio_set_value(gpio_backlight, on); -- cgit v1.2.3-70-g09d2 From ceee4f98f73bb7a1f6ee6710b9ebffd0ecb8c0ca Mon Sep 17 00:00:00 2001 From: eric miao Date: Wed, 27 Feb 2008 02:01:11 +0100 Subject: [ARM] 4842/1: pxa: remove redundant IRQ saving/restoring in clk_pxa3xx_cken_* This is unnecessary since it is already protected by spin_lock_irq{save, restore} in clock.c. Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/pxa3xx.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 7cd9ef8deb0..35f25fdaeba 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -129,28 +129,20 @@ static void clk_pxa3xx_cken_enable(struct clk *clk) { unsigned long mask = 1ul << (clk->cken & 0x1f); - local_irq_disable(); - if (clk->cken < 32) CKENA |= mask; else CKENB |= mask; - - local_irq_enable(); } static void clk_pxa3xx_cken_disable(struct clk *clk) { unsigned long mask = 1ul << (clk->cken & 0x1f); - local_irq_disable(); - if (clk->cken < 32) CKENA &= ~mask; else CKENB &= ~mask; - - local_irq_enable(); } static const struct clkops clk_pxa3xx_cken_ops = { -- cgit v1.2.3-70-g09d2 From d862ccc570c875e1454fc57ed00f5a1081985b26 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 27 Feb 2008 15:34:56 +0100 Subject: [ARM] 4843/1: Add GCR_CLKBPB for PXA3xx The PXA3xx AC97 controller has an additional control bit GCR_CLKBPB which must be used during cold reset. Signed-off-by: Mark Brown Acked-by: eric miao Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa-regs.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index ac175b4d10c..2357a73340d 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -520,6 +520,9 @@ #define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ #define GCR __REG(0x4050000C) /* Global Control Register */ +#ifdef CONFIG_PXA3xx +#define GCR_CLKBPB (1 << 31) /* Internal clock enable */ +#endif #define GCR_nDMAEN (1 << 24) /* non DMA Enable */ #define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */ #define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */ -- cgit v1.2.3-70-g09d2 From b445c56815d84b9fce40707f99811bdc354458e0 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Fri, 29 Feb 2008 19:10:51 -0500 Subject: [libata] wrap kmap_atomic(KM_IRQ0) with local_irq_save/restore() Interrupts must be disabled if using kmap_atomic(KM_IRQ0), but that was not the case in a few code paths coming directly from ATA driver interrupt handlers (which use spin_lock rather than spin_lock_irqsave). Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 0562b0a49f3..7b1f1ee8131 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1694,12 +1694,17 @@ void ata_scsi_rbuf_fill(struct ata_scsi_args *args, u8 *rbuf; unsigned int buflen, rc; struct scsi_cmnd *cmd = args->cmd; + unsigned long flags; + + local_irq_save(flags); buflen = ata_scsi_rbuf_get(cmd, &rbuf); memset(rbuf, 0, buflen); rc = actor(args, rbuf, buflen); ata_scsi_rbuf_put(cmd, rbuf); + local_irq_restore(flags); + if (rc == 0) cmd->result = SAM_STAT_GOOD; args->done(cmd); @@ -2473,6 +2478,9 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) { u8 *buf = NULL; unsigned int buflen; + unsigned long flags; + + local_irq_save(flags); buflen = ata_scsi_rbuf_get(cmd, &buf); @@ -2490,6 +2498,8 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) } ata_scsi_rbuf_put(cmd, buf); + + local_irq_restore(flags); } cmd->result = SAM_STAT_GOOD; -- cgit v1.2.3-70-g09d2 From 422b03cf75e11dfdfb29b0f19709bac585335f86 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 27 Feb 2008 10:39:22 -0500 Subject: [PATCH] Audit: Fix the format type for size_t variables Fix the following compiler warning by using "%zu" as defined in C99. CC kernel/auditsc.o kernel/auditsc.c: In function 'audit_log_single_execve_arg': kernel/auditsc.c:1074: warning: format '%ld' expects type 'long int', but argument 4 has type 'size_t' Signed-off-by: Paul Moore Signed-off-by: Al Viro --- kernel/auditsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 2087d6de67e..782262e4107 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -1070,7 +1070,7 @@ static int audit_log_single_execve_arg(struct audit_context *context, * so we can be sure nothing was lost. */ if ((i == 0) && (too_long)) - audit_log_format(*ab, "a%d_len=%ld ", arg_num, + audit_log_format(*ab, "a%d_len=%zu ", arg_num, has_cntl ? 2*len : len); /* -- cgit v1.2.3-70-g09d2 From b29ee87e9b441e72454efd1be56aa1a05ffb2f58 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Thu, 21 Feb 2008 15:53:05 -0500 Subject: [RFC] AUDIT: do not panic when printk loses messages On the latest kernels if one was to load about 15 rules, set the failure state to panic, and then run service auditd stop the kernel will panic. This is because auditd stops, then the script deletes all of the rules. These deletions are sent as audit messages out of the printk kernel interface which is already known to be lossy. These will overun the default kernel rate limiting (10 really fast messages) and will call audit_panic(). The same effect can happen if a slew of avc's come through while auditd is stopped. This can be fixed a number of ways but this patch fixes the problem by just not panicing if auditd is not running. We know printk is lossy and if the user chooses to set the failure mode to panic and tries to use printk we can't make any promises no matter how hard we try, so why try? At least in this way we continue to get lost message accounting and will eventually know that things went bad. The other change is to add a new call to audit_log_lost() if auditd disappears. We already pulled the skb off the queue and couldn't send it so that message is lost. At least this way we will account for the last message and panic if the machine is configured to panic. This code path should only be run if auditd dies for unforeseen reasons. If auditd closes correctly audit_pid will get set to 0 and we won't walk this code path. Signed-off-by: Al Viro --- kernel/audit.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/audit.c b/kernel/audit.c index 2eeea9a1424..6d7175c1e87 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -170,7 +170,9 @@ void audit_panic(const char *message) printk(KERN_ERR "audit: %s\n", message); break; case AUDIT_FAIL_PANIC: - panic("audit: %s\n", message); + /* test audit_pid since printk is always losey, why bother? */ + if (audit_pid) + panic("audit: %s\n", message); break; } } @@ -352,6 +354,7 @@ static int kauditd_thread(void *dummy) if (err < 0) { BUG_ON(err != -ECONNREFUSED); /* Shoudn't happen */ printk(KERN_ERR "audit: *NO* daemon at audit_pid=%d\n", audit_pid); + audit_log_lost("auditd dissapeared\n"); audit_pid = 0; } } else { -- cgit v1.2.3-70-g09d2 From 8d07a67cface19ac07d7324f38bda7bbb06bbdb2 Mon Sep 17 00:00:00 2001 From: Steve Grubb Date: Thu, 21 Feb 2008 16:59:22 -0500 Subject: [PATCH] drop EOE records from printk Hi, While we are looking at the printk issue, I see that its printk'ing the EOE (end of event) records which is really not something that we need in syslog. Its really intended for the realtime audit event stream handled by the audit daemon. So, lets avoid printk'ing that record type. Signed-off-by: Steve Grubb Signed-off-by: Al Viro --- kernel/audit.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/kernel/audit.c b/kernel/audit.c index 6d7175c1e87..10c4930c2bb 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -1353,17 +1353,19 @@ void audit_log_end(struct audit_buffer *ab) if (!audit_rate_check()) { audit_log_lost("rate limit exceeded"); } else { + struct nlmsghdr *nlh = nlmsg_hdr(ab->skb); if (audit_pid) { - struct nlmsghdr *nlh = nlmsg_hdr(ab->skb); nlh->nlmsg_len = ab->skb->len - NLMSG_SPACE(0); skb_queue_tail(&audit_skb_queue, ab->skb); ab->skb = NULL; wake_up_interruptible(&kauditd_wait); - } else if (printk_ratelimit()) { - struct nlmsghdr *nlh = nlmsg_hdr(ab->skb); - printk(KERN_NOTICE "type=%d %s\n", nlh->nlmsg_type, ab->skb->data + NLMSG_SPACE(0)); - } else { - audit_log_lost("printk limit exceeded\n"); + } else if (nlh->nlmsg_type != AUDIT_EOE) { + if (printk_ratelimit()) { + printk(KERN_NOTICE "type=%d %s\n", + nlh->nlmsg_type, + ab->skb->data + NLMSG_SPACE(0)); + } else + audit_log_lost("printk limit exceeded\n"); } } audit_buffer_free(ab); -- cgit v1.2.3-70-g09d2 From 0c82d83cb09a1c9fd4d24d32064ce827709c104b Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 27 Feb 2008 13:44:59 +0100 Subject: [ARM] Fix freeing of page tables for ARM in free_pgd_slow MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since 2f569af (CONFIG_HIGHPTE vs. sub-page page tables.) pte_free() calls pte_lock_deinit() and dec_zone_page_state(). So free_pgd_slow must not call the latter two when calling the first. Signed-off-by: Uwe Kleine-König Cc: Martin Schwidefsky Cc: Andrew Morton Cc: Linus Torvalds Signed-off-by: Russell King --- arch/arm/mm/pgd.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index 500c9610ab3..e0f19ab9116 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -75,7 +75,7 @@ no_pgd: void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd) { pmd_t *pmd; - struct page *pte; + pgtable_t pte; if (!pgd) return; @@ -90,10 +90,8 @@ void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd) goto free; } - pte = pmd_page(*pmd); + pte = pmd_pgtable(*pmd); pmd_clear(pmd); - dec_zone_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE); - pte_lock_deinit(pte); pte_free(mm, pte); pmd_free(mm, pmd); free: -- cgit v1.2.3-70-g09d2 From f8436158b1d76e6842856048f287799468b56eb2 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Tue, 26 Feb 2008 23:30:02 +0100 Subject: firewire: fw-sbp2: better fix for NULL pointer dereference in scsi_remove_device Patch "firewire: fw-sbp2: fix NULL pointer deref. in scsi_remove_device" had the unintended effect that firewire-sbp2 could not be unloaded anymore until all SBP-2 devices were unplugged. We now fix the NULL pointer bug by reacquiring a reference to the sdev instead of holding a reference to the sdev (and to the module) all the time. Signed-off-by: Stefan Richter Tested-by: Jarod Wilson --- drivers/firewire/fw-sbp2.c | 46 +++++++++++++++++++++++++++------------------- 1 file changed, 27 insertions(+), 19 deletions(-) diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index 5259491580f..a093ac329db 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -122,7 +122,6 @@ static const char sbp2_driver_name[] = "sbp2"; struct sbp2_logical_unit { struct sbp2_target *tgt; struct list_head link; - struct scsi_device *sdev; struct fw_address_handler address_handler; struct list_head orb_list; @@ -139,6 +138,7 @@ struct sbp2_logical_unit { int generation; int retries; struct delayed_work work; + bool has_sdev; bool blocked; }; @@ -751,20 +751,33 @@ static void sbp2_unblock(struct sbp2_target *tgt) scsi_unblock_requests(shost); } +static int sbp2_lun2int(u16 lun) +{ + struct scsi_lun eight_bytes_lun; + + memset(&eight_bytes_lun, 0, sizeof(eight_bytes_lun)); + eight_bytes_lun.scsi_lun[0] = (lun >> 8) & 0xff; + eight_bytes_lun.scsi_lun[1] = lun & 0xff; + + return scsilun_to_int(&eight_bytes_lun); +} + static void sbp2_release_target(struct kref *kref) { struct sbp2_target *tgt = container_of(kref, struct sbp2_target, kref); struct sbp2_logical_unit *lu, *next; struct Scsi_Host *shost = container_of((void *)tgt, struct Scsi_Host, hostdata[0]); + struct scsi_device *sdev; /* prevent deadlocks */ sbp2_unblock(tgt); list_for_each_entry_safe(lu, next, &tgt->lu_list, link) { - if (lu->sdev) { - scsi_remove_device(lu->sdev); - scsi_device_put(lu->sdev); + sdev = scsi_device_lookup(shost, 0, 0, sbp2_lun2int(lu->lun)); + if (sdev) { + scsi_remove_device(sdev); + scsi_device_put(sdev); } sbp2_send_management_orb(lu, tgt->node_id, lu->generation, SBP2_LOGOUT_REQUEST, lu->login_id, NULL); @@ -807,7 +820,6 @@ static void sbp2_login(struct work_struct *work) struct fw_device *device = fw_device(tgt->unit->device.parent); struct Scsi_Host *shost; struct scsi_device *sdev; - struct scsi_lun eight_bytes_lun; struct sbp2_login_response response; int generation, node_id, local_node_id; @@ -820,7 +832,7 @@ static void sbp2_login(struct work_struct *work) local_node_id = device->card->node_id; /* If this is a re-login attempt, log out, or we might be rejected. */ - if (lu->sdev) + if (lu->has_sdev) sbp2_send_management_orb(lu, device->node_id, generation, SBP2_LOGOUT_REQUEST, lu->login_id, NULL); @@ -859,7 +871,7 @@ static void sbp2_login(struct work_struct *work) sbp2_agent_reset(lu); /* This was a re-login. */ - if (lu->sdev) { + if (lu->has_sdev) { sbp2_cancel_orbs(lu); sbp2_conditionally_unblock(lu); goto out; @@ -868,13 +880,8 @@ static void sbp2_login(struct work_struct *work) if (lu->tgt->workarounds & SBP2_WORKAROUND_DELAY_INQUIRY) ssleep(SBP2_INQUIRY_DELAY); - memset(&eight_bytes_lun, 0, sizeof(eight_bytes_lun)); - eight_bytes_lun.scsi_lun[0] = (lu->lun >> 8) & 0xff; - eight_bytes_lun.scsi_lun[1] = lu->lun & 0xff; shost = container_of((void *)tgt, struct Scsi_Host, hostdata[0]); - - sdev = __scsi_add_device(shost, 0, 0, - scsilun_to_int(&eight_bytes_lun), lu); + sdev = __scsi_add_device(shost, 0, 0, sbp2_lun2int(lu->lun), lu); /* * FIXME: We are unable to perform reconnects while in sbp2_login(). * Therefore __scsi_add_device() will get into trouble if a bus reset @@ -896,7 +903,8 @@ static void sbp2_login(struct work_struct *work) } /* No error during __scsi_add_device() */ - lu->sdev = sdev; + lu->has_sdev = true; + scsi_device_put(sdev); sbp2_allow_block(lu); goto out; @@ -934,11 +942,11 @@ static int sbp2_add_logical_unit(struct sbp2_target *tgt, int lun_entry) return -ENOMEM; } - lu->tgt = tgt; - lu->sdev = NULL; - lu->lun = lun_entry & 0xffff; - lu->retries = 0; - lu->blocked = false; + lu->tgt = tgt; + lu->lun = lun_entry & 0xffff; + lu->retries = 0; + lu->has_sdev = false; + lu->blocked = false; ++tgt->dont_block; INIT_LIST_HEAD(&lu->orb_list); INIT_DELAYED_WORK(&lu->work, sbp2_login); -- cgit v1.2.3-70-g09d2 From 15803478fdea964e5f76079851fcd13068208d5d Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 24 Feb 2008 18:57:23 +0100 Subject: firewire: potentially invalid pointers used in fw_card_bm_work The bus management workqueue job was in danger to dereference NULL pointers. Also, after having temporarily lifted card->lock, a few node pointers and a device pointer may have become invalid. Add NULL pointer checks and get the necessary references. Also, move card->local_node out of fw_card_bm_work's sight during shutdown of the card. Signed-off-by: Stefan Richter Signed-off-by: Jarod Wilson --- drivers/firewire/fw-card.c | 51 ++++++++++++++++++++++++++++-------------- drivers/firewire/fw-topology.c | 1 + 2 files changed, 35 insertions(+), 17 deletions(-) diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c index 3e9719948a8..e6395b29850 100644 --- a/drivers/firewire/fw-card.c +++ b/drivers/firewire/fw-card.c @@ -214,17 +214,29 @@ static void fw_card_bm_work(struct work_struct *work) { struct fw_card *card = container_of(work, struct fw_card, work.work); - struct fw_device *root; + struct fw_device *root_device; + struct fw_node *root_node, *local_node; struct bm_data bmd; unsigned long flags; int root_id, new_root_id, irm_id, gap_count, generation, grace; int do_reset = 0; spin_lock_irqsave(&card->lock, flags); + local_node = card->local_node; + root_node = card->root_node; + + if (local_node == NULL) { + spin_unlock_irqrestore(&card->lock, flags); + return; + } + fw_node_get(local_node); + fw_node_get(root_node); generation = card->generation; - root = card->root_node->data; - root_id = card->root_node->node_id; + root_device = root_node->data; + if (root_device) + fw_device_get(root_device); + root_id = root_node->node_id; grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10)); if (card->bm_generation + 1 == generation || @@ -243,14 +255,14 @@ fw_card_bm_work(struct work_struct *work) irm_id = card->irm_node->node_id; if (!card->irm_node->link_on) { - new_root_id = card->local_node->node_id; + new_root_id = local_node->node_id; fw_notify("IRM has link off, making local node (%02x) root.\n", new_root_id); goto pick_me; } bmd.lock.arg = cpu_to_be32(0x3f); - bmd.lock.data = cpu_to_be32(card->local_node->node_id); + bmd.lock.data = cpu_to_be32(local_node->node_id); spin_unlock_irqrestore(&card->lock, flags); @@ -267,12 +279,12 @@ fw_card_bm_work(struct work_struct *work) * Another bus reset happened. Just return, * the BM work has been rescheduled. */ - return; + goto out; } if (bmd.rcode == RCODE_COMPLETE && bmd.old != 0x3f) /* Somebody else is BM, let them do the work. */ - return; + goto out; spin_lock_irqsave(&card->lock, flags); if (bmd.rcode != RCODE_COMPLETE) { @@ -282,7 +294,7 @@ fw_card_bm_work(struct work_struct *work) * do a bus reset and pick the local node as * root, and thus, IRM. */ - new_root_id = card->local_node->node_id; + new_root_id = local_node->node_id; fw_notify("BM lock failed, making local node (%02x) root.\n", new_root_id); goto pick_me; @@ -295,7 +307,7 @@ fw_card_bm_work(struct work_struct *work) */ spin_unlock_irqrestore(&card->lock, flags); schedule_delayed_work(&card->work, DIV_ROUND_UP(HZ, 10)); - return; + goto out; } /* @@ -305,20 +317,20 @@ fw_card_bm_work(struct work_struct *work) */ card->bm_generation = generation; - if (root == NULL) { + if (root_device == NULL) { /* * Either link_on is false, or we failed to read the * config rom. In either case, pick another root. */ - new_root_id = card->local_node->node_id; - } else if (atomic_read(&root->state) != FW_DEVICE_RUNNING) { + new_root_id = local_node->node_id; + } else if (atomic_read(&root_device->state) != FW_DEVICE_RUNNING) { /* * If we haven't probed this device yet, bail out now * and let's try again once that's done. */ spin_unlock_irqrestore(&card->lock, flags); - return; - } else if (root->config_rom[2] & BIB_CMC) { + goto out; + } else if (root_device->config_rom[2] & BIB_CMC) { /* * FIXME: I suppose we should set the cmstr bit in the * STATE_CLEAR register of this node, as described in @@ -332,7 +344,7 @@ fw_card_bm_work(struct work_struct *work) * successfully read the config rom, but it's not * cycle master capable. */ - new_root_id = card->local_node->node_id; + new_root_id = local_node->node_id; } pick_me: @@ -341,8 +353,8 @@ fw_card_bm_work(struct work_struct *work) * the typically much larger 1394b beta repeater delays though. */ if (!card->beta_repeaters_present && - card->root_node->max_hops < ARRAY_SIZE(gap_count_table)) - gap_count = gap_count_table[card->root_node->max_hops]; + root_node->max_hops < ARRAY_SIZE(gap_count_table)) + gap_count = gap_count_table[root_node->max_hops]; else gap_count = 63; @@ -364,6 +376,11 @@ fw_card_bm_work(struct work_struct *work) fw_send_phy_config(card, new_root_id, generation, gap_count); fw_core_initiate_bus_reset(card, 1); } + out: + if (root_device) + fw_device_put(root_device); + fw_node_put(root_node); + fw_node_put(local_node); } static void diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index 172c1867e9a..e47bb040197 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -383,6 +383,7 @@ void fw_destroy_nodes(struct fw_card *card) card->color++; if (card->local_node != NULL) for_each_fw_node(card, card->local_node, report_lost_node); + card->local_node = NULL; spin_unlock_irqrestore(&card->lock, flags); } -- cgit v1.2.3-70-g09d2 From 855c603d61ede7e2810217f15f0d574b4f29c891 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Wed, 27 Feb 2008 22:14:27 +0100 Subject: firewire: fix crash in automatic module unloading "modprobe firewire-ohci; sleep .1; modprobe -r firewire-ohci" used to result in crashes like this: BUG: unable to handle kernel paging request at ffffffff8807b455 IP: [] PGD 203067 PUD 207063 PMD 7c170067 PTE 0 Oops: 0010 [1] PREEMPT SMP CPU 0 Modules linked in: i915 drm cpufreq_ondemand acpi_cpufreq freq_table applesmc input_polldev led_class coretemp hwmon eeprom snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss button thermal processor sg snd_hda_intel snd_pcm snd_timer snd snd_page_alloc sky2 i2c_i801 rtc [last unloaded: crc_itu_t] Pid: 9, comm: events/0 Not tainted 2.6.25-rc2 #3 RIP: 0010:[] [] RSP: 0018:ffff81007dcdde88 EFLAGS: 00010246 RAX: ffff81007dc95040 RBX: ffff81007dee5390 RCX: 0000000000005e13 RDX: 0000000000008c8b RSI: 0000000000000001 RDI: ffff81007dee5388 RBP: ffff81007dc5eb40 R08: 0000000000000002 R09: ffffffff8022d05c R10: ffffffff8023b34c R11: ffffffff8041a353 R12: ffff81007dee5388 R13: ffffffff8807b455 R14: ffffffff80593bc0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff8055a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: ffffffff8807b455 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process events/0 (pid: 9, threadinfo ffff81007dcdc000, task ffff81007dc95040) Stack: ffffffff8023b396 ffffffff88082524 0000000000000000 ffffffff8807d9ae ffff81007dc5eb40 ffff81007dc9dce0 ffff81007dc5eb40 ffff81007dc5eb80 ffff81007dc9dce0 ffffffffffffffff ffffffff8023be87 0000000000000000 Call Trace: [] ? run_workqueue+0xdf/0x1df [] ? worker_thread+0xd8/0xe3 [] ? autoremove_wake_function+0x0/0x2e [] ? worker_thread+0x0/0xe3 [] ? kthread+0x47/0x74 [] ? trace_hardirqs_on_thunk+0x35/0x3a [] ? child_rip+0xa/0x12 [] ? restore_args+0x0/0x3d [] ? kthreadd+0x14c/0x171 [] ? kthreadd+0x14c/0x171 [] ? kthread+0x0/0x74 [] ? child_rip+0x0/0x12 Code: Bad RIP value. RIP [] RSP CR2: ffffffff8807b455 ---[ end trace c7366c6657fe5bed ]--- Note that this crash happened _after_ firewire-core was unloaded. The shared workqueue tried to run firewire-core's device initialization jobs or similar jobs. The fix makes sure that firewire-ohci and hence firewire-core is not unloaded before all device shutdown jobs have been completed. This is determined by the count of device initializations minus device releases. Also skip useless retries in the node initialization job if the node is to be shut down. Signed-off-by: Stefan Richter Signed-off-by: Jarod Wilson --- drivers/firewire/fw-card.c | 10 +++++++++- drivers/firewire/fw-device.c | 21 ++++++--------------- drivers/firewire/fw-device.h | 16 ++++++++++++++-- drivers/firewire/fw-sbp2.c | 4 ++++ drivers/firewire/fw-transaction.h | 2 ++ 5 files changed, 35 insertions(+), 18 deletions(-) diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c index e6395b29850..a03462750b9 100644 --- a/drivers/firewire/fw-card.c +++ b/drivers/firewire/fw-card.c @@ -18,6 +18,7 @@ #include #include +#include #include #include #include @@ -398,6 +399,7 @@ fw_card_initialize(struct fw_card *card, const struct fw_card_driver *driver, static atomic_t index = ATOMIC_INIT(-1); kref_init(&card->kref); + atomic_set(&card->device_count, 0); card->index = atomic_inc_return(&index); card->driver = driver; card->device = device; @@ -528,8 +530,14 @@ fw_core_remove_card(struct fw_card *card) card->driver = &dummy_driver; fw_destroy_nodes(card); - flush_scheduled_work(); + /* + * Wait for all device workqueue jobs to finish. Otherwise the + * firewire-core module could be unloaded before the jobs ran. + */ + while (atomic_read(&card->device_count) > 0) + msleep(100); + cancel_delayed_work_sync(&card->work); fw_flush_transactions(card); del_timer_sync(&card->flush_timer); diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c index 2ab13e0f346..870125a3638 100644 --- a/drivers/firewire/fw-device.c +++ b/drivers/firewire/fw-device.c @@ -150,21 +150,10 @@ struct bus_type fw_bus_type = { }; EXPORT_SYMBOL(fw_bus_type); -struct fw_device *fw_device_get(struct fw_device *device) -{ - get_device(&device->device); - - return device; -} - -void fw_device_put(struct fw_device *device) -{ - put_device(&device->device); -} - static void fw_device_release(struct device *dev) { struct fw_device *device = fw_device(dev); + struct fw_card *card = device->card; unsigned long flags; /* @@ -176,9 +165,9 @@ static void fw_device_release(struct device *dev) spin_unlock_irqrestore(&device->card->lock, flags); fw_node_put(device->node); - fw_card_put(device->card); kfree(device->config_rom); kfree(device); + atomic_dec(&card->device_count); } int fw_device_enable_phys_dma(struct fw_device *device) @@ -668,7 +657,8 @@ static void fw_device_init(struct work_struct *work) */ if (read_bus_info_block(device, device->generation) < 0) { - if (device->config_rom_retries < MAX_RETRIES) { + if (device->config_rom_retries < MAX_RETRIES && + atomic_read(&device->state) == FW_DEVICE_INITIALIZING) { device->config_rom_retries++; schedule_delayed_work(&device->work, RETRY_DELAY); } else { @@ -805,7 +795,8 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event) */ device_initialize(&device->device); atomic_set(&device->state, FW_DEVICE_INITIALIZING); - device->card = fw_card_get(card); + atomic_inc(&card->device_count); + device->card = card; device->node = fw_node_get(node); device->node_id = node->node_id; device->generation = card->generation; diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h index 43808c02793..78ecd3991b7 100644 --- a/drivers/firewire/fw-device.h +++ b/drivers/firewire/fw-device.h @@ -76,9 +76,21 @@ fw_device_is_shutdown(struct fw_device *device) return atomic_read(&device->state) == FW_DEVICE_SHUTDOWN; } -struct fw_device *fw_device_get(struct fw_device *device); +static inline struct fw_device * +fw_device_get(struct fw_device *device) +{ + get_device(&device->device); + + return device; +} + +static inline void +fw_device_put(struct fw_device *device) +{ + put_device(&device->device); +} + struct fw_device *fw_device_get_by_devt(dev_t devt); -void fw_device_put(struct fw_device *device); int fw_device_enable_phys_dma(struct fw_device *device); void fw_device_cdev_update(struct fw_device *device); diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index a093ac329db..03069a454c0 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -769,6 +769,7 @@ static void sbp2_release_target(struct kref *kref) struct Scsi_Host *shost = container_of((void *)tgt, struct Scsi_Host, hostdata[0]); struct scsi_device *sdev; + struct fw_device *device = fw_device(tgt->unit->device.parent); /* prevent deadlocks */ sbp2_unblock(tgt); @@ -791,6 +792,7 @@ static void sbp2_release_target(struct kref *kref) put_device(&tgt->unit->device); scsi_host_put(shost); + fw_device_put(device); } static struct workqueue_struct *sbp2_wq; @@ -1088,6 +1090,8 @@ static int sbp2_probe(struct device *dev) if (scsi_add_host(shost, &unit->device) < 0) goto fail_shost_put; + fw_device_get(device); + /* Initialize to values that won't match anything in our table. */ firmware_revision = 0xff000000; model = 0xff000000; diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index fa7967b5740..09cb7287045 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -26,6 +26,7 @@ #include #include #include +#include #define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4) #define TCODE_IS_BLOCK_PACKET(tcode) (((tcode) & 1) != 0) @@ -219,6 +220,7 @@ extern struct bus_type fw_bus_type; struct fw_card { const struct fw_card_driver *driver; struct device *device; + atomic_t device_count; struct kref kref; int node_id; -- cgit v1.2.3-70-g09d2 From 101fd46a753f8931a05d252bf5564c9415a5f8d7 Mon Sep 17 00:00:00 2001 From: Bob Nelson Date: Wed, 20 Feb 2008 05:00:56 +0100 Subject: [POWERPC] OProfile: enable callgraph support for Cell This patch enables OProfile callgraph support for the Cell processor. The original code was just calling a function to add the PC value, now it will call a function that first checks the callgraph depth. Callgraph is already enabled on the other Power platforms. Signed-off-by: Bob Nelson Signed-off-by: Arnd Bergmann --- arch/powerpc/oprofile/op_model_cell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 13929771bee..9eed1f68fca 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -1151,7 +1151,7 @@ static void cell_handle_interrupt(struct pt_regs *regs, for (i = 0; i < num_counters; ++i) { if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(i)) && ctr[i].enabled) { - oprofile_add_pc(pc, is_kernel, i); + oprofile_add_ext_sample(pc, regs, i, is_kernel); cbe_write_ctr(cpu, i, reset_value[i]); } } -- cgit v1.2.3-70-g09d2 From 9176c0b1f5a9099cebc07458042ae6a7c75af7b2 Mon Sep 17 00:00:00 2001 From: Jens Osterkamp Date: Thu, 28 Feb 2008 11:26:21 +0100 Subject: [POWERPC] move celleb DABRX definitions This moves the private DABRX definitions for celleb from beat.h to reg.h to make them usable for all. Signed-off-by: Jens Osterkamp Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/celleb/beat.h | 3 --- include/asm-powerpc/reg.h | 3 +++ 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/celleb/beat.h b/arch/powerpc/platforms/celleb/beat.h index b2e292df13c..ac82ac35b99 100644 --- a/arch/powerpc/platforms/celleb/beat.h +++ b/arch/powerpc/platforms/celleb/beat.h @@ -21,9 +21,6 @@ #ifndef _CELLEB_BEAT_H #define _CELLEB_BEAT_H -#define DABRX_KERNEL (1UL<<1) -#define DABRX_USER (1UL<<0) - int64_t beat_get_term_char(uint64_t,uint64_t*,uint64_t*,uint64_t*); int64_t beat_put_term_char(uint64_t,uint64_t,uint64_t,uint64_t); int64_t beat_repository_encode(int, const char *, uint64_t[4]); diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index 0d6238987df..edc0cfd7f6e 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -153,6 +153,9 @@ #define CTRL_RUNLATCH 0x1 #define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */ #define DABR_TRANSLATION (1UL << 2) +#define SPRN_DABRX 0x3F7 /* Data Address Breakpoint Register Extension */ +#define DABRX_USER (1UL << 0) +#define DABRX_KERNEL (1UL << 1) #define SPRN_DAR 0x013 /* Data Address Register */ #define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */ #define DSISR_NOHPTE 0x40000000 /* no translation found */ -- cgit v1.2.3-70-g09d2 From f3c1ed9720ec62626bbf3e0c3648568c131978e2 Mon Sep 17 00:00:00 2001 From: Jens Osterkamp Date: Thu, 28 Feb 2008 11:27:31 +0100 Subject: [POWERPC] enable hardware watchpoints on cell blades Ulrich Weigand has found that the hardware watchpoints on cell were not working back in November : http://ozlabs.org/pipermail/linuxppc-dev/2007-November/046135.html This patch sets them during initialization. Signed-off-by: Jens Osterkamp Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/setup.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index a7f609b3b87..dda34650cb0 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -149,6 +149,11 @@ static void __init cell_init_irq(void) mpic_init_IRQ(); } +static void __init cell_set_dabrx(void) +{ + mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER); +} + static void __init cell_setup_arch(void) { #ifdef CONFIG_SPU_BASE @@ -158,6 +163,8 @@ static void __init cell_setup_arch(void) cbe_regs_init(); + cell_set_dabrx(); + #ifdef CONFIG_CBE_RAS cbe_ras_init(); #endif -- cgit v1.2.3-70-g09d2 From f9660e8a6c16e17935777cdee5194842904c2d72 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:22 +1100 Subject: [POWERPC] Clearup cell IOMMU fixed mapping terminology It's called the fixed mapping, not the static mapping. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index edab631a8dc..bbe83899647 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -549,7 +549,7 @@ static void cell_dma_dev_setup_iommu(struct device *dev) archdata->dma_data = &window->table; } -static void cell_dma_dev_setup_static(struct device *dev); +static void cell_dma_dev_setup_fixed(struct device *dev); static void cell_dma_dev_setup(struct device *dev) { @@ -557,7 +557,7 @@ static void cell_dma_dev_setup(struct device *dev) /* Order is important here, these are not mutually exclusive */ if (get_dma_ops(dev) == &dma_iommu_fixed_ops) - cell_dma_dev_setup_static(dev); + cell_dma_dev_setup_fixed(dev); else if (get_pci_dma_ops() == &dma_iommu_ops) cell_dma_dev_setup_iommu(dev); else if (get_pci_dma_ops() == &dma_direct_ops) @@ -858,7 +858,7 @@ static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask) return 0; } -static void cell_dma_dev_setup_static(struct device *dev) +static void cell_dma_dev_setup_fixed(struct device *dev) { struct dev_archdata *archdata = &dev->archdata; u64 addr; @@ -894,7 +894,7 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, for (i = fbase; i < fbase + fsize; i++, uaddr += IOMMU_PAGE_SIZE) { /* Don't touch the dynamic region */ if (i >= dbase && i < (dbase + dsize)) { - pr_debug("iommu: static/dynamic overlap, skipping\n"); + pr_debug("iommu: fixed/dynamic overlap, skipping\n"); continue; } io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); -- cgit v1.2.3-70-g09d2 From 0d7386ebffd8506b28c37a7d5541132a576f64e2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:23 +1100 Subject: [POWERPC] Use it_offset not pte_offset in cell IOMMU code The cell IOMMU tce build and free routines use pte_offset to convert the index passed from the generic IOMMU code into a page table offset. This takes into account the SPIDER_DMA_OFFSET which sets the top bit of every DMA address. However it doesn't cater for the IOMMU window starting at a non-zero address, as the base of the window is not incorporated into pte_offset at all. As it turns out tbl->it_offset already contains the value we need, it takes into account the base of the window and also pte_offset. So use it instead! Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index bbe83899647..4e75919bf6b 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -200,7 +200,7 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages, (window->ioid & IOPTE_IOID_Mask); #endif - io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset); + io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); for (i = 0; i < npages; i++, uaddr += IOMMU_PAGE_SIZE) io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); @@ -232,7 +232,7 @@ static void tce_free_cell(struct iommu_table *tbl, long index, long npages) | (window->ioid & IOPTE_IOID_Mask); #endif - io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset); + io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); for (i = 0; i < npages; i++) io_pte[i] = pte; -- cgit v1.2.3-70-g09d2 From 08e024272e529076663e5b4dc8eeecd4131f8a48 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:23 +1100 Subject: [POWERPC] Remove unused pte_offset variable The cell IOMMU code no longer needs to save the pte_offset variable separately, it is incorporated into tbl->it_offset. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 4e75919bf6b..555d264ad56 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -123,7 +123,6 @@ struct iommu_window { struct cbe_iommu *iommu; unsigned long offset; unsigned long size; - unsigned long pte_offset; unsigned int ioid; struct iommu_table table; }; @@ -475,13 +474,11 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, window->size = size; window->ioid = ioid; window->iommu = iommu; - window->pte_offset = pte_offset; window->table.it_blocksize = 16; window->table.it_base = (unsigned long)iommu->ptab; window->table.it_index = iommu->nid; - window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + - window->pte_offset; + window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + pte_offset; window->table.it_size = size >> IOMMU_PAGE_SHIFT; iommu_init_table(&window->table, iommu->nid); -- cgit v1.2.3-70-g09d2 From edf441fb80f9d7a962c298e8da94c8c64802fffa Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:24 +1100 Subject: [POWERPC] Move allocation of cell IOMMU pad page There's no need to allocate the pad page unless we're going to actually use it - so move the allocation to where we know we're going to use it. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 555d264ad56..8e57e1af378 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -344,12 +344,6 @@ static void cell_iommu_setup_page_tables(struct cbe_iommu *iommu, iommu->ptab = page_address(page); memset(iommu->ptab, 0, ptab_size); - /* allocate a bogus page for the end of each mapping */ - page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0); - BUG_ON(!page); - iommu->pad_page = page_address(page); - clear_page(iommu->pad_page); - /* number of pages needed for a page table */ n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> IOMMU_PAGE_SHIFT; @@ -463,6 +457,7 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, unsigned long pte_offset) { struct iommu_window *window; + struct page *page; u32 ioid; ioid = cell_iommu_get_ioid(np); @@ -501,6 +496,11 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, * This code also assumes that we have a window that starts at 0, * which is the case on all spider based blades. */ + page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0); + BUG_ON(!page); + iommu->pad_page = page_address(page); + clear_page(iommu->pad_page); + __set_bit(0, window->table.it_map); tce_build_cell(&window->table, window->table.it_offset, 1, (unsigned long)iommu->pad_page, DMA_TO_DEVICE); -- cgit v1.2.3-70-g09d2 From 7d432ff1b7db87e78eb74d42631d2a23ca6f26f2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:25 +1100 Subject: [POWERPC] Split setup of IOMMU stab and ptab, allocate dynamic/fixed ptabs separately Currently the cell IOMMU code allocates the entire IOMMU page table in a contiguous chunk. This is nice and tidy, but for machines with larger amounts of RAM the page table allocation can fail due to it simply being too large. So split the segment table and page table setup routine, and arrange to have the dynamic and fixed page tables allocated separately. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 69 +++++++++++++++++++++++-------------- 1 file changed, 43 insertions(+), 26 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 8e57e1af378..187a723eafc 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -306,50 +306,54 @@ static int cell_iommu_find_ioc(int nid, unsigned long *base) return -ENODEV; } -static void cell_iommu_setup_page_tables(struct cbe_iommu *iommu, +static void cell_iommu_setup_stab(struct cbe_iommu *iommu, unsigned long dbase, unsigned long dsize, unsigned long fbase, unsigned long fsize) { struct page *page; - int i; - unsigned long reg, segments, pages_per_segment, ptab_size, stab_size, - n_pte_pages, base; - - base = dbase; - if (fsize != 0) - base = min(fbase, dbase); + unsigned long segments, stab_size; segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT; - pages_per_segment = 1ull << IO_PAGENO_BITS; - pr_debug("%s: iommu[%d]: segments: %lu, pages per segment: %lu\n", - __FUNCTION__, iommu->nid, segments, pages_per_segment); + pr_debug("%s: iommu[%d]: segments: %lu\n", + __FUNCTION__, iommu->nid, segments); /* set up the segment table */ stab_size = segments * sizeof(unsigned long); page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size)); BUG_ON(!page); iommu->stab = page_address(page); - clear_page(iommu->stab); + memset(iommu->stab, 0, stab_size); +} + +static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, + unsigned long base, unsigned long size, unsigned long gap_base, + unsigned long gap_size) +{ + struct page *page; + int i; + unsigned long reg, segments, pages_per_segment, ptab_size, + n_pte_pages, start_seg, *ptab; + + start_seg = base >> IO_SEGMENT_SHIFT; + segments = size >> IO_SEGMENT_SHIFT; + pages_per_segment = 1ull << IO_PAGENO_BITS; - /* ... and the page tables. Since these are contiguous, we can treat - * the page tables as one array of ptes, like pSeries does. - */ ptab_size = segments * pages_per_segment * sizeof(unsigned long); pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__, iommu->nid, ptab_size, get_order(ptab_size)); page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size)); BUG_ON(!page); - iommu->ptab = page_address(page); - memset(iommu->ptab, 0, ptab_size); + ptab = page_address(page); + memset(ptab, 0, ptab_size); /* number of pages needed for a page table */ n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> IOMMU_PAGE_SHIFT; pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n", - __FUNCTION__, iommu->nid, iommu->stab, iommu->ptab, + __FUNCTION__, iommu->nid, iommu->stab, ptab, n_pte_pages); /* initialise the STEs */ @@ -364,12 +368,21 @@ static void cell_iommu_setup_page_tables(struct cbe_iommu *iommu, __unknown_page_size_error(); } + gap_base = gap_base >> IO_SEGMENT_SHIFT; + gap_size = gap_size >> IO_SEGMENT_SHIFT; + pr_debug("Setting up IOMMU stab:\n"); - for (i = base >> IO_SEGMENT_SHIFT; i < segments; i++) { - iommu->stab[i] = reg | - (__pa(iommu->ptab) + n_pte_pages * IOMMU_PAGE_SIZE * i); + for (i = start_seg; i < (start_seg + segments); i++) { + if (i >= gap_base && i < (gap_base + gap_size)) { + pr_debug("\toverlap at %d, skipping\n", i); + continue; + } + iommu->stab[i] = reg | (__pa(ptab) + n_pte_pages * + IOMMU_PAGE_SIZE * (i - start_seg)); pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]); } + + return ptab; } static void cell_iommu_enable_hardware(struct cbe_iommu *iommu) @@ -416,7 +429,8 @@ static void cell_iommu_enable_hardware(struct cbe_iommu *iommu) static void cell_iommu_setup_hardware(struct cbe_iommu *iommu, unsigned long base, unsigned long size) { - cell_iommu_setup_page_tables(iommu, base, size, 0, 0); + cell_iommu_setup_stab(iommu, base, size, 0, 0); + iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0); cell_iommu_enable_hardware(iommu); } @@ -870,8 +884,10 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, struct device_node *np, unsigned long dbase, unsigned long dsize, unsigned long fbase, unsigned long fsize) { - unsigned long base_pte, uaddr, *io_pte; int i; + unsigned long base_pte, uaddr, *io_pte, *ptab; + + ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize); dma_iommu_fixed_base = fbase; @@ -883,7 +899,7 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase); - io_pte = iommu->ptab; + io_pte = ptab; base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask); @@ -894,7 +910,7 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, pr_debug("iommu: fixed/dynamic overlap, skipping\n"); continue; } - io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); + io_pte[i - fbase] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); } mb(); @@ -992,7 +1008,8 @@ static int __init cell_iommu_fixed_mapping_init(void) "fixed window 0x%lx-0x%lx\n", iommu->nid, dbase, dbase + dsize, fbase, fbase + fsize); - cell_iommu_setup_page_tables(iommu, dbase, dsize, fbase, fsize); + cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize); + iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0); cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize, fbase, fsize); cell_iommu_enable_hardware(iommu); -- cgit v1.2.3-70-g09d2 From 3d3e6da17d6af42a3fd4891fb09d93dca002e590 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:26 +1100 Subject: [POWERPC] Cell IOMMU: n_pte_pages is in 4K page units, not IOMMU_PAGE_SIZE We use n_pte_pages to calculate the stride through the page tables, but we also use it to set the NPPT value in the segment table entry. That is defined as the number of 4K pages per segment, so we should calculate it as such regardless of the IOMMU page size. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 187a723eafc..7a861cb960d 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -348,9 +348,8 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, ptab = page_address(page); memset(ptab, 0, ptab_size); - /* number of pages needed for a page table */ - n_pte_pages = (pages_per_segment * - sizeof(unsigned long)) >> IOMMU_PAGE_SHIFT; + /* number of 4K pages needed for a page table */ + n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12; pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n", __FUNCTION__, iommu->nid, iommu->stab, ptab, @@ -377,8 +376,8 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, pr_debug("\toverlap at %d, skipping\n", i); continue; } - iommu->stab[i] = reg | (__pa(ptab) + n_pte_pages * - IOMMU_PAGE_SIZE * (i - start_seg)); + iommu->stab[i] = reg | (__pa(ptab) + (n_pte_pages << 12) * + (i - start_seg)); pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]); } -- cgit v1.2.3-70-g09d2 From 225d49050f9b6506f2f9df6b40e591ee93939d11 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:27 +1100 Subject: [POWERPC] Allow for different IOMMU page sizes in cell IOMMU code Make some preliminary changes to cell_iommu_alloc_ptab() to allow it to take the page size as a parameter rather than assuming IOMMU_PAGE_SIZE. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 7a861cb960d..b0e347e4933 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -113,7 +113,7 @@ /* IOMMU sizing */ #define IO_SEGMENT_SHIFT 28 -#define IO_PAGENO_BITS (IO_SEGMENT_SHIFT - IOMMU_PAGE_SHIFT) +#define IO_PAGENO_BITS(shift) (IO_SEGMENT_SHIFT - (shift)) /* The high bit needs to be set on every DMA address */ #define SPIDER_DMA_OFFSET 0x80000000ul @@ -328,7 +328,7 @@ static void cell_iommu_setup_stab(struct cbe_iommu *iommu, static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, unsigned long base, unsigned long size, unsigned long gap_base, - unsigned long gap_size) + unsigned long gap_size, unsigned long page_shift) { struct page *page; int i; @@ -337,7 +337,10 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, start_seg = base >> IO_SEGMENT_SHIFT; segments = size >> IO_SEGMENT_SHIFT; - pages_per_segment = 1ull << IO_PAGENO_BITS; + pages_per_segment = 1ull << IO_PAGENO_BITS(page_shift); + /* PTEs for each segment must start on a 4K bounday */ + pages_per_segment = max(pages_per_segment, + (1 << 12) / sizeof(unsigned long)); ptab_size = segments * pages_per_segment * sizeof(unsigned long); pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__, @@ -358,13 +361,12 @@ static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu, /* initialise the STEs */ reg = IOSTE_V | ((n_pte_pages - 1) << 5); - if (IOMMU_PAGE_SIZE == 0x1000) - reg |= IOSTE_PS_4K; - else if (IOMMU_PAGE_SIZE == 0x10000) - reg |= IOSTE_PS_64K; - else { - extern void __unknown_page_size_error(void); - __unknown_page_size_error(); + switch (page_shift) { + case 12: reg |= IOSTE_PS_4K; break; + case 16: reg |= IOSTE_PS_64K; break; + case 20: reg |= IOSTE_PS_1M; break; + case 24: reg |= IOSTE_PS_16M; break; + default: BUG(); } gap_base = gap_base >> IO_SEGMENT_SHIFT; @@ -429,7 +431,8 @@ static void cell_iommu_setup_hardware(struct cbe_iommu *iommu, unsigned long base, unsigned long size) { cell_iommu_setup_stab(iommu, base, size, 0, 0); - iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0); + iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0, + IOMMU_PAGE_SHIFT); cell_iommu_enable_hardware(iommu); } @@ -886,7 +889,8 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, int i; unsigned long base_pte, uaddr, *io_pte, *ptab; - ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize); + ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, + IOMMU_PAGE_SHIFT); dma_iommu_fixed_base = fbase; @@ -1008,7 +1012,8 @@ static int __init cell_iommu_fixed_mapping_init(void) dbase + dsize, fbase, fbase + fsize); cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize); - iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0); + iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0, + IOMMU_PAGE_SHIFT); cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize, fbase, fsize); cell_iommu_enable_hardware(iommu); -- cgit v1.2.3-70-g09d2 From da40451bba23b51eaca4170a095891646ce72104 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 29 Feb 2008 18:33:29 +1100 Subject: [POWERPC] Convert the cell IOMMU fixed mapping to 16M IOMMU pages The only tricky part is we need to adjust the PTE insertion loop to cater for holes in the page table. The PTEs for each segment start on a 4K boundary, so with 16M pages we have 16 PTEs per segment and then a gap to the next 4K page boundary. It might be possible to allocate the PTEs for each segment separately, saving the memory currently filling the gaps. However we'd need to check that's OK with the hardware, and that it actually saves memory. Signed-off-by: Michael Ellerman Signed-off-by: Arnd Bergmann --- arch/powerpc/platforms/cell/iommu.c | 37 ++++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 15 deletions(-) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index b0e347e4933..20ea0e118f2 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -882,38 +882,45 @@ static void cell_dma_dev_setup_fixed(struct device *dev) dev_dbg(dev, "iommu: fixed addr = %lx\n", addr); } +static void insert_16M_pte(unsigned long addr, unsigned long *ptab, + unsigned long base_pte) +{ + unsigned long segment, offset; + + segment = addr >> IO_SEGMENT_SHIFT; + offset = (addr >> 24) - (segment << IO_PAGENO_BITS(24)); + ptab = ptab + (segment * (1 << 12) / sizeof(unsigned long)); + + pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n", + addr, ptab, segment, offset); + + ptab[offset] = base_pte | (__pa(addr) & IOPTE_RPN_Mask); +} + static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, struct device_node *np, unsigned long dbase, unsigned long dsize, unsigned long fbase, unsigned long fsize) { - int i; - unsigned long base_pte, uaddr, *io_pte, *ptab; + unsigned long base_pte, uaddr, ioaddr, *ptab; - ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, - IOMMU_PAGE_SHIFT); + ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, 24); dma_iommu_fixed_base = fbase; - /* convert from bytes into page table indices */ - dbase = dbase >> IOMMU_PAGE_SHIFT; - dsize = dsize >> IOMMU_PAGE_SHIFT; - fbase = fbase >> IOMMU_PAGE_SHIFT; - fsize = fsize >> IOMMU_PAGE_SHIFT; - pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase); - io_pte = ptab; base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask); - uaddr = 0; - for (i = fbase; i < fbase + fsize; i++, uaddr += IOMMU_PAGE_SIZE) { + for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) { /* Don't touch the dynamic region */ - if (i >= dbase && i < (dbase + dsize)) { + ioaddr = uaddr + fbase; + if (ioaddr >= dbase && ioaddr < (dbase + dsize)) { pr_debug("iommu: fixed/dynamic overlap, skipping\n"); continue; } - io_pte[i - fbase] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask); + + insert_16M_pte(uaddr, ptab, base_pte); } mb(); -- cgit v1.2.3-70-g09d2 From 9b5cf48b06a52c04b85c88642c3b620db8e1d592 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 3 Mar 2008 01:17:37 +0100 Subject: x86: revert "x86: CPA: avoid split of alias mappings" Revert: commit 8be8f54bae3453588011cad06363813a5293af53 Author: Thomas Gleixner Date: Sat Feb 23 20:43:21 2008 +0100 x86: CPA: avoid split of alias mappings because it clearly mishandles the case when __change_page_attr(), called from __change_page_attr_set_clr(), changes cpa->processed to 1 and cpa_process_alias(cpa) is executed right after that. This crashes my x86-64 test box early in the boot process (ref. http://bugzilla.kernel.org/show_bug.cgi?id=10140#c4). Signed-off-by: Rafael J. Wysocki Acked-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/pageattr.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 7049294fb46..14e48b5a94b 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -26,7 +26,6 @@ struct cpa_data { pgprot_t mask_set; pgprot_t mask_clr; int numpages; - int processed; int flushtlb; unsigned long pfn; }; @@ -291,8 +290,8 @@ try_preserve_large_page(pte_t *kpte, unsigned long address, */ nextpage_addr = (address + psize) & pmask; numpages = (nextpage_addr - address) >> PAGE_SHIFT; - if (numpages < cpa->processed) - cpa->processed = numpages; + if (numpages < cpa->numpages) + cpa->numpages = numpages; /* * We are safe now. Check whether the new pgprot is the same: @@ -319,7 +318,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address, */ addr = address + PAGE_SIZE; pfn++; - for (i = 1; i < cpa->processed; i++, addr += PAGE_SIZE, pfn++) { + for (i = 1; i < cpa->numpages; i++, addr += PAGE_SIZE, pfn++) { pgprot_t chk_prot = static_protections(new_prot, addr, pfn); if (pgprot_val(chk_prot) != pgprot_val(new_prot)) @@ -343,7 +342,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address, * that we limited the number of possible pages already to * the number of pages in the large page. */ - if (address == (nextpage_addr - psize) && cpa->processed == numpages) { + if (address == (nextpage_addr - psize) && cpa->numpages == numpages) { /* * The address is aligned and the number of pages * covers the full page. @@ -573,7 +572,7 @@ repeat: set_pte_atomic(kpte, new_pte); cpa->flushtlb = 1; } - cpa->processed = 1; + cpa->numpages = 1; return 0; } @@ -584,7 +583,7 @@ repeat: do_split = try_preserve_large_page(kpte, address, cpa); /* * When the range fits into the existing large page, - * return. cp->processed and cpa->tlbflush have been updated in + * return. cp->numpages and cpa->tlbflush have been updated in * try_large_page: */ if (do_split <= 0) @@ -663,7 +662,7 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias) * Store the remaining nr of pages for the large page * preservation check. */ - cpa->numpages = cpa->processed = numpages; + cpa->numpages = numpages; ret = __change_page_attr(cpa, checkalias); if (ret) @@ -680,9 +679,9 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias) * CPA operation. Either a large page has been * preserved or a single page update happened. */ - BUG_ON(cpa->processed > numpages); - numpages -= cpa->processed; - cpa->vaddr += cpa->processed * PAGE_SIZE; + BUG_ON(cpa->numpages > numpages); + numpages -= cpa->numpages; + cpa->vaddr += cpa->numpages * PAGE_SIZE; } return 0; } -- cgit v1.2.3-70-g09d2 From 902955fc13259dcec1321d45251a477977fcba39 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 3 Mar 2008 13:53:58 +0100 Subject: x86: revert "x86: fix pmd_bad and pud_bad to support huge pages" revert commit cded932b75ab0a5f9181ee3da34a0a488d1a14fd, "x86: fix pmd_bad and pud_bad to support huge pages", it causes a bootup hang, as reported and bisected by Arjan van de Ven. Bisected-by: Arjan van de Ven Signed-off-by: Ingo Molnar --- include/asm-x86/pgtable_32.h | 4 +--- include/asm-x86/pgtable_64.h | 6 ++---- 2 files changed, 3 insertions(+), 7 deletions(-) diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h index b478efa971e..a842c7222b1 100644 --- a/include/asm-x86/pgtable_32.h +++ b/include/asm-x86/pgtable_32.h @@ -91,9 +91,7 @@ extern unsigned long pg0[]; /* To avoid harmful races, pmd_none(x) should check only the lower when PAE */ #define pmd_none(x) (!(unsigned long)pmd_val(x)) #define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) -#define pmd_bad(x) ((pmd_val(x) \ - & ~(PAGE_MASK | _PAGE_USER | _PAGE_PSE | _PAGE_NX)) \ - != _KERNPG_TABLE) +#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) #define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h index 0a9258333cb..0a0b77bc736 100644 --- a/include/asm-x86/pgtable_64.h +++ b/include/asm-x86/pgtable_64.h @@ -153,14 +153,12 @@ static inline unsigned long pgd_bad(pgd_t pgd) static inline unsigned long pud_bad(pud_t pud) { - return pud_val(pud) & - ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX); + return pud_val(pud) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER); } static inline unsigned long pmd_bad(pmd_t pmd) { - return pmd_val(pmd) & - ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX); + return pmd_val(pmd) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER); } #define pte_none(x) (!pte_val(x)) -- cgit v1.2.3-70-g09d2 From a345b4ba2086bacc63884e5d72268415a97bcbff Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 3 Mar 2008 10:02:44 -0800 Subject: Revert "x86: fix pmd_bad and pud_bad to support huge pages" This reverts commit cded932b75ab0a5f9181ee3da34a0a488d1a14fd. Arjan bisected down a boot-time hang to this, saying: ".. it prevents the kernel to finish booting on my (Penryn based) laptop. The boot stops right after freeing the init memory." and while it's not clear exactly what triggers it, at this stage we're better off just reverting it while Ingo tries to figure out what went wrong. Requested-by: Arjan van de Ven Cc: Hans Rosenfeld Cc: Nish Aravamudan Acked-by: Ingo Molnar Signed-off-by: Linus Torvalds --- include/asm-x86/pgtable_32.h | 4 +--- include/asm-x86/pgtable_64.h | 6 ++---- 2 files changed, 3 insertions(+), 7 deletions(-) diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h index b478efa971e..a842c7222b1 100644 --- a/include/asm-x86/pgtable_32.h +++ b/include/asm-x86/pgtable_32.h @@ -91,9 +91,7 @@ extern unsigned long pg0[]; /* To avoid harmful races, pmd_none(x) should check only the lower when PAE */ #define pmd_none(x) (!(unsigned long)pmd_val(x)) #define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) -#define pmd_bad(x) ((pmd_val(x) \ - & ~(PAGE_MASK | _PAGE_USER | _PAGE_PSE | _PAGE_NX)) \ - != _KERNPG_TABLE) +#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) #define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h index 0a9258333cb..0a0b77bc736 100644 --- a/include/asm-x86/pgtable_64.h +++ b/include/asm-x86/pgtable_64.h @@ -153,14 +153,12 @@ static inline unsigned long pgd_bad(pgd_t pgd) static inline unsigned long pud_bad(pud_t pud) { - return pud_val(pud) & - ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX); + return pud_val(pud) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER); } static inline unsigned long pmd_bad(pmd_t pmd) { - return pmd_val(pmd) & - ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX); + return pmd_val(pmd) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER); } #define pte_none(x) (!pte_val(x)) -- cgit v1.2.3-70-g09d2 From a64e715fc74b1a7dcc5944f848acc38b2c4d4ee2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 3 Mar 2008 10:12:14 -0800 Subject: Allow ARG_MAX execve string space even with a small stack limit The new code that removed the limitation on the execve string size (which was historically 32 pages) replaced it with a much softer limit based on RLIMIT_STACK which is usually much larger than the traditional limit. See commit b6a2fea39318e43fee84fa7b0b90d68bed92d2ba ("mm: variable length argument support") for details. However, if you have a small stack limit (perhaps because you need lots of stacks in a threaded environment), the new heuristic of allowing up to 1/4th of RLIMIT_STACK to be used for argument and environment strings could actually be smaller than the old limit. So just say that it's ok to have up to ARG_MAX strings regardless of the value of RLIMIT_STACK, and check the rlimit only when going over that traditional limit. (Of course, if you actually have a *really* small stack limit, the whole stack itself will be limited before you hit ARG_MAX, but that has always been true and is clearly the right behaviour anyway). Acked-by: Carlos O'Donell Cc: Michael Kerrisk Cc: Peter Zijlstra Cc: Ollie Wild Signed-off-by: Linus Torvalds --- fs/exec.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/fs/exec.c b/fs/exec.c index a44b142fb46..54a0a557b67 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -173,8 +173,15 @@ static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos, return NULL; if (write) { - struct rlimit *rlim = current->signal->rlim; unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start; + struct rlimit *rlim; + + /* + * We've historically supported up to 32 pages (ARG_MAX) + * of argument strings even with small stacks + */ + if (size <= ARG_MAX) + return page; /* * Limit to 1/4-th the stack size for the argv+env strings. @@ -183,6 +190,7 @@ static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos, * - the program will have a reasonable amount of stack left * to work from. */ + rlim = current->signal->rlim; if (size > rlim[RLIMIT_STACK].rlim_cur / 4) { put_page(page); return NULL; -- cgit v1.2.3-70-g09d2 From 78a4a50a86b0a54f7ecbc164267b6c762760254c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 29 Feb 2008 22:02:31 -0800 Subject: docbook: fix filesystems.tmpl source files Fix docbook problems in filesystems.tmpl. These cause the generated docbook to be incorrect. Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- fs/buffer.c | 3 +-- fs/jbd/transaction.c | 17 +++++++++-------- fs/mpage.c | 11 +++-------- 3 files changed, 13 insertions(+), 18 deletions(-) diff --git a/fs/buffer.c b/fs/buffer.c index 3ebccf4aa7e..897cd7477b3 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -627,8 +627,7 @@ repeat: } /** - * sync_mapping_buffers - write out and wait upon a mapping's "associated" - * buffers + * sync_mapping_buffers - write out & wait upon a mapping's "associated" buffers * @mapping: the mapping which wants those buffers written * * Starts I/O against the buffers at mapping->private_list, and waits upon diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c index 038ed743619..c6cbb6cd59b 100644 --- a/fs/jbd/transaction.c +++ b/fs/jbd/transaction.c @@ -369,7 +369,7 @@ out: /** - * int journal_restart() - restart a handle . + * int journal_restart() - restart a handle. * @handle: handle to restart * @nblocks: nr credits requested * @@ -844,8 +844,7 @@ out: } /** - * int journal_get_undo_access() - Notify intent to modify metadata with - * non-rewindable consequences + * int journal_get_undo_access() - Notify intent to modify metadata with non-rewindable consequences * @handle: transaction * @bh: buffer to undo * @credits: store the number of taken credits here (if not NULL) @@ -921,12 +920,14 @@ out: } /** - * int journal_dirty_data() - mark a buffer as containing dirty data which - * needs to be flushed before we can commit the - * current transaction. + * int journal_dirty_data() - mark a buffer as containing dirty data to be flushed * @handle: transaction * @bh: bufferhead to mark * + * Description: + * Mark a buffer as containing dirty data which needs to be flushed before + * we can commit the current transaction. + * * The buffer is placed on the transaction's data list and is marked as * belonging to the transaction. * @@ -1098,11 +1099,11 @@ no_journal: } /** - * int journal_dirty_metadata() - mark a buffer as containing dirty metadata + * int journal_dirty_metadata() - mark a buffer as containing dirty metadata * @handle: transaction to add buffer to. * @bh: buffer to mark * - * mark dirty metadata which needs to be journaled as part of the current + * Mark dirty metadata which needs to be journaled as part of the current * transaction. * * The buffer is placed on the transaction's metadata list and is marked diff --git a/fs/mpage.c b/fs/mpage.c index 5df564366f3..235e4d3873a 100644 --- a/fs/mpage.c +++ b/fs/mpage.c @@ -325,16 +325,12 @@ confused: } /** - * mpage_readpages - populate an address space with some pages, and - * start reads against them. - * + * mpage_readpages - populate an address space with some pages & start reads against them * @mapping: the address_space * @pages: The address of a list_head which contains the target pages. These * pages have their ->index populated and are otherwise uninitialised. - * * The page at @pages->prev has the lowest file offset, and reads should be * issued in @pages->prev to @pages->next order. - * * @nr_pages: The number of pages at *@pages * @get_block: The filesystem's block mapper function. * @@ -360,6 +356,7 @@ confused: * So an mpage read of the first 16 blocks of an ext2 file will cause I/O to be * submitted in the following order: * 12 0 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16 + * * because the indirect block has to be read to get the mappings of blocks * 13,14,15,16. Obviously, this impacts performance. * @@ -656,9 +653,7 @@ out: } /** - * mpage_writepages - walk the list of dirty pages of the given - * address space and writepage() all of them. - * + * mpage_writepages - walk the list of dirty pages of the given address space & writepage() all of them * @mapping: address space structure to write * @wbc: subtract the number of written pages from *@wbc->nr_to_write * @get_block: the filesystem's block mapper function. -- cgit v1.2.3-70-g09d2 From 7b089c8b90e6caedda889334bba5c72a152b79c6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 29 Feb 2008 22:02:40 -0800 Subject: docbook: fix rapidio source files Fix docbook problems in rapidio source files. These cause the generated docbook to be incorrect. Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- drivers/rapidio/rio-driver.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c index 5480119ff9d..3ce9f3defc1 100644 --- a/drivers/rapidio/rio-driver.c +++ b/drivers/rapidio/rio-driver.c @@ -78,8 +78,7 @@ void rio_dev_put(struct rio_dev *rdev) } /** - * rio_device_probe - Tell if a RIO device structure has a matching RIO - * device id structure + * rio_device_probe - Tell if a RIO device structure has a matching RIO device id structure * @id: the RIO device id structure to match against * @dev: the RIO device structure to match against * @@ -137,7 +136,7 @@ static int rio_device_remove(struct device *dev) * rio_register_driver - register a new RIO driver * @rdrv: the RIO driver structure to register * - * Adds a &struct rio_driver to the list of registered drivers + * Adds a &struct rio_driver to the list of registered drivers. * Returns a negative value on error, otherwise 0. If no error * occurred, the driver remains registered even if no device * was claimed during registration. @@ -167,8 +166,7 @@ void rio_unregister_driver(struct rio_driver *rdrv) } /** - * rio_match_bus - Tell if a RIO device structure has a matching RIO - * driver device id structure + * rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure * @dev: the standard device structure to match against * @drv: the standard driver structure containing the ids to match against * -- cgit v1.2.3-70-g09d2 From e59e4a09729b06a131de9042b2a5b05b7ad26174 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 29 Feb 2008 22:02:50 -0800 Subject: docbook: fix scsi source file Fix docbook problem in SCSI source files. These cause the generated docbook to be incorrect. Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- drivers/scsi/scsi_scan.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 1dc165ad17f..e67c14e31ba 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1577,8 +1577,7 @@ static void __scsi_scan_target(struct device *parent, unsigned int channel, } /** - * scsi_scan_target - scan a target id, possibly including all LUNs on the - * target. + * scsi_scan_target - scan a target id, possibly including all LUNs on the target. * @parent: host to scan * @channel: channel to scan * @id: target id to scan -- cgit v1.2.3-70-g09d2 From d0bcabcd72dda5f553322a1ca92ae31c15b408b6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 29 Feb 2008 22:03:07 -0800 Subject: docbook: fix usb source files Fix docbook problems in USB source files. These cause the generated docbook to be incorrect. Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- drivers/usb/core/usb.c | 6 ++---- include/linux/usb.h | 9 +++------ 2 files changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 4e984060c98..f6f19908f5f 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -99,8 +99,7 @@ struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev, EXPORT_SYMBOL_GPL(usb_ifnum_to_if); /** - * usb_altnum_to_altsetting - get the altsetting structure with a given - * alternate setting number. + * usb_altnum_to_altsetting - get the altsetting structure with a given alternate setting number. * @intf: the interface containing the altsetting in question * @altnum: the desired alternate setting number * @@ -442,8 +441,7 @@ EXPORT_SYMBOL_GPL(usb_put_intf); */ /** - * usb_lock_device_for_reset - cautiously acquire the lock for a - * usb device structure + * usb_lock_device_for_reset - cautiously acquire the lock for a usb device structure * @udev: device that's being locked * @iface: interface bound to the driver making the request (optional) * diff --git a/include/linux/usb.h b/include/linux/usb.h index 2372e2e6b52..5bd3ae8aaaf 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -781,8 +781,7 @@ static inline int usb_endpoint_is_isoc_out( .idVendor = (vend), \ .idProduct = (prod) /** - * USB_DEVICE_VER - macro used to describe a specific usb device with a - * version range + * USB_DEVICE_VER - describe a specific usb device with a version range * @vend: the 16 bit USB Vendor ID * @prod: the 16 bit USB Product ID * @lo: the bcdDevice_lo value @@ -799,8 +798,7 @@ static inline int usb_endpoint_is_isoc_out( .bcdDevice_hi = (hi) /** - * USB_DEVICE_INTERFACE_PROTOCOL - macro used to describe a usb - * device with a specific interface protocol + * USB_DEVICE_INTERFACE_PROTOCOL - describe a usb device with a specific interface protocol * @vend: the 16 bit USB Vendor ID * @prod: the 16 bit USB Product ID * @pr: bInterfaceProtocol value @@ -846,8 +844,7 @@ static inline int usb_endpoint_is_isoc_out( .bInterfaceProtocol = (pr) /** - * USB_DEVICE_AND_INTERFACE_INFO - macro used to describe a specific usb device - * with a class of usb interfaces + * USB_DEVICE_AND_INTERFACE_INFO - describe a specific usb device with a class of usb interfaces * @vend: the 16 bit USB Vendor ID * @prod: the 16 bit USB Product ID * @cl: bInterfaceClass value -- cgit v1.2.3-70-g09d2 From 0643245f595dc175c14245fa1e1e9efda3e12f2a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 29 Feb 2008 22:03:15 -0800 Subject: docbook: fix kernel-api source files Fix docbook problems in kernel-api.tmpl. These cause the generated docbook to be incorrect. Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- drivers/base/transport_class.c | 4 +--- drivers/pci/rom.c | 3 +-- mm/truncate.c | 3 +-- 3 files changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/base/transport_class.c b/drivers/base/transport_class.c index f25e7c6b2d2..40bca48abc1 100644 --- a/drivers/base/transport_class.c +++ b/drivers/base/transport_class.c @@ -126,9 +126,7 @@ static int transport_setup_classdev(struct attribute_container *cont, } /** - * transport_setup_device - declare a new dev for transport class association - * but don't make it visible yet. - * + * transport_setup_device - declare a new dev for transport class association but don't make it visible yet. * @dev: the generic device representing the entity being added * * Usually, dev represents some component in the HBA system (either diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index a98b2470b9e..bd5c0e03139 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -242,8 +242,7 @@ void pci_remove_rom(struct pci_dev *pdev) #endif /* 0 */ /** - * pci_cleanup_rom - internal routine for freeing the ROM copy created - * by pci_map_rom_copy called from remove.c + * pci_cleanup_rom - free the ROM copy created by pci_map_rom_copy * @pdev: pointer to pci device struct * * Free the copied ROM if we allocated one. diff --git a/mm/truncate.c b/mm/truncate.c index c35c49e54fb..7d20ce41ecf 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -134,8 +134,7 @@ invalidate_complete_page(struct address_space *mapping, struct page *page) } /** - * truncate_inode_pages - truncate range of pages specified by start and - * end byte offsets + * truncate_inode_pages - truncate range of pages specified by start & end byte offsets * @mapping: mapping to truncate * @lstart: offset from which to truncate * @lend: offset to which to truncate -- cgit v1.2.3-70-g09d2 From 7105a387a8ac9b512b900efd5ff7a97acc44fb39 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 29 Feb 2008 22:03:27 -0800 Subject: docbook: fix fusion source files Fix docbook problems in fusion source files. These cause the generated docbook to be incorrect. Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- drivers/message/fusion/mptbase.c | 25 +++++++++++++------------ drivers/message/fusion/mptscsih.c | 14 +++++--------- 2 files changed, 18 insertions(+), 21 deletions(-) diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 0c303c84b37..6b6df867958 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -632,8 +632,7 @@ mpt_deregister(u8 cb_idx) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_event_register - Register protocol-specific event callback - * handler. + * mpt_event_register - Register protocol-specific event callback handler. * @cb_idx: previously registered (via mpt_register) callback handle * @ev_cbfunc: callback function * @@ -654,8 +653,7 @@ mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_event_deregister - Deregister protocol-specific event callback - * handler. + * mpt_event_deregister - Deregister protocol-specific event callback handler * @cb_idx: previously registered callback handle * * Each protocol-specific driver should call this routine @@ -765,11 +763,13 @@ mpt_device_driver_deregister(u8 cb_idx) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_get_msg_frame - Obtain a MPT request frame from the pool (of 1024) - * allocated per MPT adapter. + * mpt_get_msg_frame - Obtain an MPT request frame from the pool * @cb_idx: Handle of registered MPT protocol driver * @ioc: Pointer to MPT adapter structure * + * Obtain an MPT request frame from the pool (of 1024) that are + * allocated per MPT adapter. + * * Returns pointer to a MPT request frame or %NULL if none are available * or IOC is not active. */ @@ -834,13 +834,12 @@ mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc) /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** - * mpt_put_msg_frame - Send a protocol specific MPT request frame - * to a IOC. + * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC * @cb_idx: Handle of registered MPT protocol driver * @ioc: Pointer to MPT adapter structure * @mf: Pointer to MPT request frame * - * This routine posts a MPT request frame to the request post FIFO of a + * This routine posts an MPT request frame to the request post FIFO of a * specific MPT adapter. */ void @@ -868,13 +867,15 @@ mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf) } /** - * mpt_put_msg_frame_hi_pri - Send a protocol specific MPT request frame - * to a IOC using hi priority request queue. + * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame * @cb_idx: Handle of registered MPT protocol driver * @ioc: Pointer to MPT adapter structure * @mf: Pointer to MPT request frame * - * This routine posts a MPT request frame to the request post FIFO of a + * Send a protocol-specific MPT request frame to an IOC using + * hi-priority request queue. + * + * This routine posts an MPT request frame to the request post FIFO of a * specific MPT adapter. **/ void diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index af1de0ccee2..0c252f60c4c 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -1533,7 +1533,7 @@ mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx) * * Remark: Currently invoked from a non-interrupt thread (_bh). * - * Remark: With old EH code, at most 1 SCSI TaskMgmt function per IOC + * Note: With old EH code, at most 1 SCSI TaskMgmt function per IOC * will be active. * * Returns 0 for SUCCESS, or %FAILED. @@ -2537,14 +2537,12 @@ mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR /** * mptscsih_get_scsi_lookup - * - * retrieves scmd entry from ScsiLookup[] array list - * * @ioc: Pointer to MPT_ADAPTER structure * @i: index into the array * - * Returns the scsi_cmd pointer + * retrieves scmd entry from ScsiLookup[] array list * + * Returns the scsi_cmd pointer **/ static struct scsi_cmnd * mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i) @@ -2561,14 +2559,12 @@ mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i) /** * mptscsih_getclear_scsi_lookup - * - * retrieves and clears scmd entry from ScsiLookup[] array list - * * @ioc: Pointer to MPT_ADAPTER structure * @i: index into the array * - * Returns the scsi_cmd pointer + * retrieves and clears scmd entry from ScsiLookup[] array list * + * Returns the scsi_cmd pointer **/ static struct scsi_cmnd * mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i) -- cgit v1.2.3-70-g09d2