From 1396adc3c2bdc556d4cdd1cf107aa0b6d59fbb1e Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 1 Oct 2012 14:34:42 -0700 Subject: x86, suspend: Correct the restore of CR4, EFER; skip computing EFLAGS.ID The patch: 73201dbe x86, suspend: On wakeup always initialize cr4 and EFER ... was incorrectly committed in an intermediate (unfinished) form. - We need to test CF, not ZF, for a bit test with btl. - We don't actually need to compute the existence of EFLAGS.ID, since we set a flag at suspend time if CR4 should be restored. Signed-off-by: H. Peter Anvin Cc: Rafael J. Wysocki Link: http://lkml.kernel.org/r/1348529239-17943-1-git-send-email-hpa@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/realmode/rm/wakeup_asm.S | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) diff --git a/arch/x86/realmode/rm/wakeup_asm.S b/arch/x86/realmode/rm/wakeup_asm.S index e56479e5805..9e7e14797a7 100644 --- a/arch/x86/realmode/rm/wakeup_asm.S +++ b/arch/x86/realmode/rm/wakeup_asm.S @@ -74,18 +74,9 @@ ENTRY(wakeup_start) lidtl wakeup_idt - /* Clear the EFLAGS but remember if we have EFLAGS.ID */ - movl $X86_EFLAGS_ID, %ecx - pushl %ecx - popfl - pushfl - popl %edi + /* Clear the EFLAGS */ pushl $0 popfl - pushfl - popl %edx - xorl %edx, %edi - andl %ecx, %edi /* %edi is zero iff CPUID & %cr4 are missing */ /* Check header signature... */ movl signature, %eax @@ -120,12 +111,12 @@ ENTRY(wakeup_start) movl %eax, %cr3 btl $WAKEUP_BEHAVIOR_RESTORE_CR4, %edi - jz 1f + jnc 1f movl pmode_cr4, %eax movl %eax, %cr4 1: btl $WAKEUP_BEHAVIOR_RESTORE_EFER, %edi - jz 1f + jnc 1f movl pmode_efer, %eax movl pmode_efer + 4, %edx movl $MSR_EFER, %ecx -- cgit v1.2.3-70-g09d2 From fcd8af585f587741c051f7124b8dee6c73c8629b Mon Sep 17 00:00:00 2001 From: David Hooper Date: Tue, 2 Oct 2012 15:26:53 +0100 Subject: x86/reboot: Remove quirk entry for SBC FITPC Remove the quirk for the SBC FITPC. It seems ot have been required when the default was kbd reboot, but no longer required now that the default is acpi reboot. Furthermore, BIOS reboot no longer works for this board as of 2.6.39 or any of the 3.x kernels. Signed-off-by: David Hooper Signed-off-by: Alan Cox Link: http://lkml.kernel.org/r/20121002142635.17403.59959.stgit@localhost.localdomain Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 52190a938b4..4e8ba39eaf0 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -358,14 +358,6 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"), }, }, - { /* Handle problems with rebooting on CompuLab SBC-FITPC2 */ - .callback = set_bios_reboot, - .ident = "CompuLab SBC-FITPC2", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "CompuLab"), - DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"), - }, - }, { /* Handle problems with rebooting on ASUS P4S800 */ .callback = set_bios_reboot, .ident = "ASUS P4S800", -- cgit v1.2.3-70-g09d2 From 961c79761dda351b5fb263a0654b98daac130b7a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 2 Oct 2012 11:34:09 +0300 Subject: x86/cache_info: Use ARRAY_SIZE() in amd_l3_attrs() Using ARRAY_SIZE() is more readable. Signed-off-by: Dan Carpenter Reviewed-by: Srivatsa S. Bhat Cc: Shai Fultheim Cc: Greg Kroah-Hartman Cc: Andreas Herrmann Link: http://lkml.kernel.org/r/20121002083409.GM12398@elgon.mountain Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/intel_cacheinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 9a7c90d80bc..93c5451bdd5 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -991,7 +991,7 @@ static struct attribute ** __cpuinit amd_l3_attrs(void) if (attrs) return attrs; - n = sizeof (default_attrs) / sizeof (struct attribute *); + n = ARRAY_SIZE(default_attrs); if (amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) n += 2; -- cgit v1.2.3-70-g09d2 From 07ac2296fb24e40ba8271a08167b588f4bbbe90c Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 4 Oct 2012 14:15:02 +0300 Subject: ASoC: twl6040: Fix Stream DAPM mapping Fixes commit: 805238b ASoC: twl6040: Convert to use DAI DAPM widgets where the connection between the stream widgets and the ADC widgets was reversed and because of this on capture the DAPM is not powering up the codec. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/codecs/twl6040.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c index e8f97af7592..00b85cc1b9a 100644 --- a/sound/soc/codecs/twl6040.c +++ b/sound/soc/codecs/twl6040.c @@ -820,10 +820,10 @@ static const struct snd_soc_dapm_route intercon[] = { {"VIBRA DAC", NULL, "Vibra Playback"}, /* ADC -> Stream mapping */ - {"ADC Left", NULL, "Legacy Capture"}, - {"ADC Left", NULL, "Capture"}, - {"ADC Right", NULL, "Legacy Capture"}, - {"ADC Right", NULL, "Capture"}, + {"Legacy Capture" , NULL, "ADC Left"}, + {"Capture", NULL, "ADC Left"}, + {"Legacy Capture", NULL, "ADC Right"}, + {"Capture" , NULL, "ADC Right"}, /* Capture path */ {"Analog Left Capture Route", "Headset Mic", "HSMIC"}, -- cgit v1.2.3-70-g09d2 From 034940a6b3afbe79022ab6922dd9d2982b78e6d5 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Tue, 2 Oct 2012 15:31:16 +0300 Subject: ASoC: omap-abe-twl6040: Fix typo of Vibrator It is not Vinrator but Vibrator. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/omap/omap-abe-twl6040.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/omap/omap-abe-twl6040.c b/sound/soc/omap/omap-abe-twl6040.c index be525dfe9fa..750d595d01d 100644 --- a/sound/soc/omap/omap-abe-twl6040.c +++ b/sound/soc/omap/omap-abe-twl6040.c @@ -220,7 +220,7 @@ static int omap_abe_twl6040_init(struct snd_soc_pcm_runtime *rtd) twl6040_disconnect_pin(dapm, pdata->has_hf, "Ext Spk"); twl6040_disconnect_pin(dapm, pdata->has_ep, "Earphone Spk"); twl6040_disconnect_pin(dapm, pdata->has_aux, "Line Out"); - twl6040_disconnect_pin(dapm, pdata->has_vibra, "Vinrator"); + twl6040_disconnect_pin(dapm, pdata->has_vibra, "Vibrator"); twl6040_disconnect_pin(dapm, pdata->has_hsmic, "Headset Mic"); twl6040_disconnect_pin(dapm, pdata->has_mainmic, "Main Handset Mic"); twl6040_disconnect_pin(dapm, pdata->has_submic, "Sub Handset Mic"); -- cgit v1.2.3-70-g09d2 From 07b706dc9e92f030cfca330879aa8b7ecbb7b79a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 4 Oct 2012 11:27:15 +0300 Subject: ASoC: Fix wrong include for McPDM McPDM needs platt/cpu.h for omap_rev and not omap_hwmod.h. Drivers must not include omap_hwmod.h at, it will be private to mach-omap2 soon. Fix the problem before other drivers will also start including omap_hwmod.h. Note that also plat/cpu.h will be going away, so the omap_rev check needs to be replaced with mcpdm-watchdog flag from platform_data or DT. Signed-off-by: Tony Lindgren Signed-off-by: Mark Brown --- sound/soc/omap/omap-mcpdm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c index 775565032ce..fdf655e3f1b 100644 --- a/sound/soc/omap/omap-mcpdm.c +++ b/sound/soc/omap/omap-mcpdm.c @@ -40,7 +40,7 @@ #include #include -#include +#include #include "omap-mcpdm.h" #include "omap-pcm.h" -- cgit v1.2.3-70-g09d2 From 68214d998a2e3102854cf10ebe505243035702fc Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 4 Oct 2012 11:27:16 +0300 Subject: ASoC: omap-mcpdm: Remove OMAP revision check The OMAP revision check is not needed since the watchdog bit is not in use on 4430 ES1.0 and have no effect when we set the bit. The watchdog need to be enabled on all other revisions. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/omap/omap-mcpdm.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c index fdf655e3f1b..e134b271a70 100644 --- a/sound/soc/omap/omap-mcpdm.c +++ b/sound/soc/omap/omap-mcpdm.c @@ -40,7 +40,6 @@ #include #include -#include #include "omap-mcpdm.h" #include "omap-pcm.h" @@ -258,13 +257,9 @@ static int omap_mcpdm_dai_startup(struct snd_pcm_substream *substream, mutex_lock(&mcpdm->mutex); if (!dai->active) { - /* Enable watch dog for ES above ES 1.0 to avoid saturation */ - if (omap_rev() != OMAP4430_REV_ES1_0) { - u32 ctrl = omap_mcpdm_read(mcpdm, MCPDM_REG_CTRL); + u32 ctrl = omap_mcpdm_read(mcpdm, MCPDM_REG_CTRL); - omap_mcpdm_write(mcpdm, MCPDM_REG_CTRL, - ctrl | MCPDM_WD_EN); - } + omap_mcpdm_write(mcpdm, MCPDM_REG_CTRL, ctrl | MCPDM_WD_EN); omap_mcpdm_open_streams(mcpdm); } mutex_unlock(&mcpdm->mutex); -- cgit v1.2.3-70-g09d2 From b764de2d8bafff3a52aa6ee66cedf435486974f4 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 3 Oct 2012 12:46:57 +0200 Subject: ASoC: ams-delta: Convert to use snd_soc_register_card() The old method of registering with the ASoC core by creating a "soc-audio" platform device no longer works for Amstrad Delta sound card after recent changes to drvdata handling (commit 0998d0631001288a5974afc0b2a5f568bcdecb4d, 'device-core: Ensure drvdata = NULL when no driver is bound'. Use snd_soc_register_card() method instead, as suggested by the ASoC core generated warning message, and move both the card and codec platform device registration to the arch board file where those belong. Created and tested against linux-3.6-rc5. Signed-off-by: Janusz Krzysztofik Acked-by: Tony Lindgren Signed-off-by: Mark Brown --- arch/arm/mach-omap1/board-ams-delta.c | 12 +++++++ sound/soc/omap/ams-delta.c | 63 +++++++++++++++++------------------ 2 files changed, 42 insertions(+), 33 deletions(-) diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index c53469802c0..5ab9c6bdce8 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -444,16 +444,28 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = { .lclk_khz_max = 1334, /* results in 5fps CIF, 10fps QCIF */ }; +static struct platform_device ams_delta_audio_device = { + .name = "ams-delta-audio", + .id = -1, +}; + +static struct platform_device cx20442_codec_device = { + .name = "cx20442-codec", + .id = -1, +}; + static struct platform_device *ams_delta_devices[] __initdata = { &latch1_gpio_device, &latch2_gpio_device, &ams_delta_kp_device, &ams_delta_camera_device, + &ams_delta_audio_device, }; static struct platform_device *late_devices[] __initdata = { &ams_delta_nand_device, &ams_delta_lcd_device, + &cx20442_codec_device, }; static void __init ams_delta_init(void) diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c index 7d4fa8ed669..7b18b748c17 100644 --- a/sound/soc/omap/ams-delta.c +++ b/sound/soc/omap/ams-delta.c @@ -575,56 +575,53 @@ static struct snd_soc_card ams_delta_audio_card = { }; /* Module init/exit */ -static struct platform_device *ams_delta_audio_platform_device; -static struct platform_device *cx20442_platform_device; - -static int __init ams_delta_module_init(void) +static __devinit int ams_delta_probe(struct platform_device *pdev) { + struct snd_soc_card *card = &ams_delta_audio_card; int ret; - if (!(machine_is_ams_delta())) - return -ENODEV; - - ams_delta_audio_platform_device = - platform_device_alloc("soc-audio", -1); - if (!ams_delta_audio_platform_device) - return -ENOMEM; + card->dev = &pdev->dev; - platform_set_drvdata(ams_delta_audio_platform_device, - &ams_delta_audio_card); - - ret = platform_device_add(ams_delta_audio_platform_device); - if (ret) - goto err; - - /* - * Codec platform device could be registered from elsewhere (board?), - * but I do it here as it makes sense only if used with the card. - */ - cx20442_platform_device = - platform_device_register_simple("cx20442-codec", -1, NULL, 0); + ret = snd_soc_register_card(card); + if (ret) { + dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); + card->dev = NULL; + return ret; + } return 0; -err: - platform_device_put(ams_delta_audio_platform_device); - return ret; } -late_initcall(ams_delta_module_init); -static void __exit ams_delta_module_exit(void) +static int __devexit ams_delta_remove(struct platform_device *pdev) { + struct snd_soc_card *card = platform_get_drvdata(pdev); + if (tty_unregister_ldisc(N_V253) != 0) - dev_warn(&ams_delta_audio_platform_device->dev, + dev_warn(&pdev->dev, "failed to unregister V253 line discipline\n"); snd_soc_jack_free_gpios(&ams_delta_hook_switch, ARRAY_SIZE(ams_delta_hook_switch_gpios), ams_delta_hook_switch_gpios); - platform_device_unregister(cx20442_platform_device); - platform_device_unregister(ams_delta_audio_platform_device); + snd_soc_unregister_card(card); + card->dev = NULL; + return 0; } -module_exit(ams_delta_module_exit); + +#define DRV_NAME "ams-delta-audio" + +static struct platform_driver ams_delta_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = ams_delta_probe, + .remove = __devexit_p(ams_delta_remove), +}; + +module_platform_driver(ams_delta_driver); MODULE_AUTHOR("Janusz Krzysztofik "); MODULE_DESCRIPTION("ALSA SoC driver for Amstrad E3 (Delta) videophone"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); -- cgit v1.2.3-70-g09d2 From eac77839f9707c4813344bef64e8b62d128236dd Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 26 Sep 2012 16:22:32 +0100 Subject: ASoC: bells: Correct typo in sub speaker DAI name for WM5110 Signed-off-by: Mark Brown --- sound/soc/samsung/bells.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/samsung/bells.c b/sound/soc/samsung/bells.c index 5dc10dfc0d4..a2ca1567b9e 100644 --- a/sound/soc/samsung/bells.c +++ b/sound/soc/samsung/bells.c @@ -247,7 +247,7 @@ static struct snd_soc_dai_link bells_dai_wm5110[] = { { .name = "Sub", .stream_name = "Sub", - .cpu_dai_name = "wm5102-aif3", + .cpu_dai_name = "wm5110-aif3", .codec_dai_name = "wm9081-hifi", .codec_name = "wm9081.1-006c", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF -- cgit v1.2.3-70-g09d2 From 5ae9eb4cbdfd640269dbd66aa3c92ea8e11cc838 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 2 Oct 2012 12:02:48 +0100 Subject: ASoC: wm2200: Use rev A register patches on rev B Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm2200.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm2200.c b/sound/soc/codecs/wm2200.c index efa93dbb019..2008b7b533b 100644 --- a/sound/soc/codecs/wm2200.c +++ b/sound/soc/codecs/wm2200.c @@ -2091,6 +2091,7 @@ static __devinit int wm2200_i2c_probe(struct i2c_client *i2c, switch (wm2200->rev) { case 0: + case 1: ret = regmap_register_patch(wm2200->regmap, wm2200_reva_patch, ARRAY_SIZE(wm2200_reva_patch)); if (ret != 0) { -- cgit v1.2.3-70-g09d2 From a1b98e12b7f8fad2f0aa3c08a3302bcac7ae1ec7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 2 Oct 2012 19:10:43 +0100 Subject: ASoC: wm2200: Fix non-inverted OUT2 mute control Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm2200.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm2200.c b/sound/soc/codecs/wm2200.c index 2008b7b533b..eab64a19398 100644 --- a/sound/soc/codecs/wm2200.c +++ b/sound/soc/codecs/wm2200.c @@ -1028,7 +1028,7 @@ SOC_DOUBLE_R_TLV("OUT2 Digital Volume", WM2200_DAC_DIGITAL_VOLUME_2L, WM2200_DAC_DIGITAL_VOLUME_2R, WM2200_OUT2L_VOL_SHIFT, 0x9f, 0, digital_tlv), SOC_DOUBLE("OUT2 Switch", WM2200_PDM_1, WM2200_SPK1L_MUTE_SHIFT, - WM2200_SPK1R_MUTE_SHIFT, 1, 0), + WM2200_SPK1R_MUTE_SHIFT, 1, 1), }; WM2200_MIXER_ENUMS(OUT1L, WM2200_OUT1LMIX_INPUT_1_SOURCE); -- cgit v1.2.3-70-g09d2 From 6f5601251d7e306b8a7bf5e674c5307d865c0fa1 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Thu, 4 Oct 2012 20:01:21 -0400 Subject: net, TTY: initialize tty->driver_data before usage Commit 9c650ffc ("TTY: ircomm_tty, add tty install") split _open() to _install() and _open(). It also moved the initialization of driver_data out of open(), but never added it to install() - causing a NULL ptr deref whenever the driver was used. Signed-off-by: Sasha Levin Acked-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- net/irda/ircomm/ircomm_tty.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/irda/ircomm/ircomm_tty.c b/net/irda/ircomm/ircomm_tty.c index 95a3a7a336b..496ce2cebcd 100644 --- a/net/irda/ircomm/ircomm_tty.c +++ b/net/irda/ircomm/ircomm_tty.c @@ -421,6 +421,8 @@ static int ircomm_tty_install(struct tty_driver *driver, struct tty_struct *tty) hashbin_insert(ircomm_tty, (irda_queue_t *) self, line, NULL); } + tty->driver_data = self; + return tty_port_install(&self->port, driver, tty); } -- cgit v1.2.3-70-g09d2 From 2351a6c6e7d5a5e848411b5dd2c02142497624cc Mon Sep 17 00:00:00 2001 From: Markus Trippelsdorf Date: Fri, 5 Oct 2012 14:57:17 +0200 Subject: tty: Fix bogus "callbacks suppressed" messages On the current git tree one sees messages such as: tty_init_dev: 24 callbacks suppressed tty_init_dev: 3 callbacks suppressed To fix this we need to look at condition before calling __ratelimit in the WARN_RATELIMIT macro. While at it remove the superfluous __WARN_RATELIMIT macros. Original patch is from Joe Perches and Jiri Slaby. Signed-off-by: Markus Trippelsdorf Acked-and-tested-by: Borislav Petkov Signed-off-by: Greg Kroah-Hartman --- include/linux/ratelimit.h | 27 +++++++++------------------ 1 file changed, 9 insertions(+), 18 deletions(-) diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h index e11ccb4cf48..0a260d8a18b 100644 --- a/include/linux/ratelimit.h +++ b/include/linux/ratelimit.h @@ -46,20 +46,17 @@ extern int ___ratelimit(struct ratelimit_state *rs, const char *func); #define WARN_ON_RATELIMIT(condition, state) \ WARN_ON((condition) && __ratelimit(state)) -#define __WARN_RATELIMIT(condition, state, format...) \ -({ \ - int rtn = 0; \ - if (unlikely(__ratelimit(state))) \ - rtn = WARN(condition, format); \ - rtn; \ -}) - -#define WARN_RATELIMIT(condition, format...) \ +#define WARN_RATELIMIT(condition, format, ...) \ ({ \ static DEFINE_RATELIMIT_STATE(_rs, \ DEFAULT_RATELIMIT_INTERVAL, \ DEFAULT_RATELIMIT_BURST); \ - __WARN_RATELIMIT(condition, &_rs, format); \ + int rtn = !!(condition); \ + \ + if (unlikely(rtn && __ratelimit(&_rs))) \ + WARN(rtn, format, ##__VA_ARGS__); \ + \ + rtn; \ }) #else @@ -67,15 +64,9 @@ extern int ___ratelimit(struct ratelimit_state *rs, const char *func); #define WARN_ON_RATELIMIT(condition, state) \ WARN_ON(condition) -#define __WARN_RATELIMIT(condition, state, format...) \ -({ \ - int rtn = WARN(condition, format); \ - rtn; \ -}) - -#define WARN_RATELIMIT(condition, format...) \ +#define WARN_RATELIMIT(condition, format, ...) \ ({ \ - int rtn = WARN(condition, format); \ + int rtn = WARN(condition, format, ##__VA_ARGS__); \ rtn; \ }) -- cgit v1.2.3-70-g09d2 From 725dd00a99dd5fb94af55115bf7ade59624c8bc3 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Sun, 30 Sep 2012 13:19:19 +0400 Subject: serial: sccnxp: Allows the driver to be compiled as a module Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 233fbaaf255..2a53be5f010 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1150,7 +1150,7 @@ config SERIAL_SC26XX_CONSOLE Support for Console on SC2681/SC2692 serial ports. config SERIAL_SCCNXP - bool "SCCNXP serial port support" + tristate "SCCNXP serial port support" depends on !SERIAL_SC26XX select SERIAL_CORE default n @@ -1162,7 +1162,7 @@ config SERIAL_SCCNXP config SERIAL_SCCNXP_CONSOLE bool "Console on SCCNXP serial port" - depends on SERIAL_SCCNXP + depends on SERIAL_SCCNXP=y select SERIAL_CORE_CONSOLE help Support for console on SCCNXP serial ports. -- cgit v1.2.3-70-g09d2 From ee98581f624a6ce0f17706d7ff2a161aacfb977a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 27 Sep 2012 20:38:26 +0200 Subject: staging: serial: dgrp: Add missing #include MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On m68k: drivers/staging/dgrp/dgrp_mon_ops.c: In function ‘dgrp_mon_read’: drivers/staging/dgrp/dgrp_mon_ops.c:304: error: implicit declaration of function ‘copy_to_user’ drivers/staging/dgrp/dgrp_specproc.c: In function ‘config_proc_write’: drivers/staging/dgrp/dgrp_specproc.c:470: error: implicit declaration of function ‘copy_from_user’ drivers/staging/dgrp/dgrp_tty.c: In function ‘drp_wmove’: drivers/staging/dgrp/dgrp_tty.c:1284: error: implicit declaration of function ‘copy_from_user’ drivers/staging/dgrp/dgrp_tty.c: In function ‘get_modem_info’: drivers/staging/dgrp/dgrp_tty.c:2267: error: implicit declaration of function ‘put_user’ drivers/staging/dgrp/dgrp_tty.c: In function ‘set_modem_info’: drivers/staging/dgrp/dgrp_tty.c:2283: error: implicit declaration of function ‘access_ok’ drivers/staging/dgrp/dgrp_tty.c:2283: error: ‘VERIFY_READ’ undeclared (first use in this function) drivers/staging/dgrp/dgrp_tty.c:2283: error: (Each undeclared identifier is reported only once drivers/staging/dgrp/dgrp_tty.c:2283: error: for each function it appears in.) drivers/staging/dgrp/dgrp_tty.c:2287: error: implicit declaration of function ‘get_user’ drivers/staging/dgrp/dgrp_tty.c: In function ‘dgrp_tty_digigetedelay’: drivers/staging/dgrp/dgrp_tty.c:2474: error: implicit declaration of function ‘copy_to_user’ drivers/staging/dgrp/dgrp_tty.c: In function ‘dgrp_tty_ioctl’: drivers/staging/dgrp/dgrp_tty.c:2618: error: ‘VERIFY_WRITE’ undeclared (first use in this function) Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/staging/dgrp/dgrp_mon_ops.c | 1 + drivers/staging/dgrp/dgrp_specproc.c | 1 + drivers/staging/dgrp/dgrp_tty.c | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/staging/dgrp/dgrp_mon_ops.c b/drivers/staging/dgrp/dgrp_mon_ops.c index 268dcb95204..4792d056a36 100644 --- a/drivers/staging/dgrp/dgrp_mon_ops.c +++ b/drivers/staging/dgrp/dgrp_mon_ops.c @@ -38,6 +38,7 @@ #include #include #include +#include #include "dgrp_common.h" diff --git a/drivers/staging/dgrp/dgrp_specproc.c b/drivers/staging/dgrp/dgrp_specproc.c index 28f5c9ab6b4..a5840e7d666 100644 --- a/drivers/staging/dgrp/dgrp_specproc.c +++ b/drivers/staging/dgrp/dgrp_specproc.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include "dgrp_common.h" diff --git a/drivers/staging/dgrp/dgrp_tty.c b/drivers/staging/dgrp/dgrp_tty.c index 7d7de873870..72f6fcfa987 100644 --- a/drivers/staging/dgrp/dgrp_tty.c +++ b/drivers/staging/dgrp/dgrp_tty.c @@ -40,6 +40,7 @@ #include #include #include +#include #include "dgrp_common.h" -- cgit v1.2.3-70-g09d2 From b70936d9ffbf0f45f4fa13a03122f015f13ecdb0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 5 Oct 2012 09:34:37 -0700 Subject: tty: serial: sccnxp: Fix bug with unterminated platform_id list The build even tells you that this is a bad thing: drivers/tty/serial/sccnxp: struct platform_device_id is 32 bytes. The last of 8 is: 0x73 0x63 0x36 0x38 0x36 0x39 0x32 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x54 0x0c 0x01 0x00 0x00 0x00 0x00 0x00 FATAL: drivers/tty/serial/sccnxp: struct platform_device_id is not terminated with a NULL entry! So fix this problem up before someone oopses their box when loading the driver, as this breaks the build. Cc: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/sccnxp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index b7086d004f5..e821068cd95 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -971,6 +971,7 @@ static const struct platform_device_id sccnxp_id_table[] = { { "sc28202", SCCNXP_TYPE_SC28202 }, { "sc68681", SCCNXP_TYPE_SC68681 }, { "sc68692", SCCNXP_TYPE_SC68692 }, + { }, }; MODULE_DEVICE_TABLE(platform, sccnxp_id_table); -- cgit v1.2.3-70-g09d2 From c77d7162a7ae451c2e895d7ef7fbeb0906107472 Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Sat, 6 Oct 2012 10:20:16 +0200 Subject: drm/i915: remove useless BUG_ON which caused a regression in 3.5. starting an old X server causes a kernel BUG since commit 1b50247a8d: ------------[ cut here ]------------ kernel BUG at drivers/gpu/drm/i915/i915_gem.c:3661! invalid opcode: 0000 [#1] SMP Modules linked in: snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss uvcvideo +videobuf2_core videodev videobuf2_vmalloc videobuf2_memops uhci_hcd ath9k mac80211 snd_hda_codec_realtek ath9k_common microcode +ath9k_hw psmouse serio_raw sg ath cfg80211 atl1c lpc_ich mfd_core ehci_hcd snd_hda_intel snd_hda_codec snd_hwdep snd_pcm rtc_cmos +snd_timer snd evdev eeepc_laptop snd_page_alloc sparse_keymap Pid: 2866, comm: X Not tainted 3.5.6-rc1-eeepc #1 ASUSTeK Computer INC. 1005HA/1005HA EIP: 0060:[] EFLAGS: 00013297 CPU: 0 EIP is at i915_gem_entervt_ioctl+0xf1/0x110 EAX: f5941df4 EBX: f5940000 ECX: 00000000 EDX: 00020000 ESI: f5835400 EDI: 00000000 EBP: f51d7e38 ESP: f51d7e20 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: b760e0a0 CR3: 351b6000 CR4: 000007d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process X (pid: 2866, ti=f51d6000 task=f61af8d0 task.ti=f51d6000) Stack: 00000001 00000000 f5835414 f51d7e84 f5835400 f54f85c0 f51d7f10 c12b530b 00000001 c151b139 c14751b6 c152e030 00000b32 00006459 00000059 0000e200 00000001 00000000 00006459 c159ddd0 c12dc1a0 ffffffea 00000000 00000000 Call Trace: [] drm_ioctl+0x2eb/0x440 [] ? i915_gem_init+0xe0/0xe0 [] ? enqueue_hrtimer+0x1b/0x50 [] ? __hrtimer_start_range_ns+0x161/0x330 [] ? lock_hrtimer_base+0x23/0x50 [] ? hrtimer_try_to_cancel+0x33/0x70 [] ? drm_version+0x90/0x90 [] vfs_ioctl+0x31/0x50 [] do_vfs_ioctl+0x64/0x510 [] ? hrtimer_nanosleep+0x8e/0x100 [] ? update_rmtp+0x80/0x80 [] sys_ioctl+0x39/0x60 [] syscall_call+0x7/0xb Code: 83 c4 0c 5b 5e 5f 5d c3 c7 44 24 04 2c 05 53 c1 c7 04 24 6f ef 47 c1 e8 6e e0 fd ff c7 83 38 1e 00 00 00 00 00 00 e9 3f ff ff +ff <0f> 0b eb fe 0f 0b eb fe 8d b4 26 00 00 00 00 0f 0b eb fe 8d b6 EIP: [] i915_gem_entervt_ioctl+0xf1/0x110 SS:ESP 0068:f51d7e20 ---[ end trace dd332ec083cbd513 ]--- The crash happens here in i915_gem_entervt_ioctl() : 3659 BUG_ON(!list_empty(&dev_priv->mm.active_list)); 3660 BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); -> 3661 BUG_ON(!list_empty(&dev_priv->mm.inactive_list)); 3662 mutex_unlock(&dev->struct_mutex); Quoting Chris : "That BUG_ON there is silly and can simply be removed. The check is to verify that no batches were submitted to the kernel whilst the UMS/GEM client was suspended - to which the BUG_ONs are a crude approximation. Furthermore, the checks are too late, since it means we attempted to program the hardware whilst it was in an invalid state, the BUG_ONs are the least of your concerns at that point." Note that this regression has been introduced in commit 1b50247a8ddde4af5aaa0e6bc125615372ce6c16 Author: Chris Wilson Date: Tue Apr 24 15:47:30 2012 +0100 drm/i915: Remove the list of pinned inactive objects Cc: Chris Wilson Signed-off-by: Willy Tarreau [danvet: Added note about the regressing commit and cc: stable.] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index b55eee38af7..53de95c05b1 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4099,7 +4099,6 @@ i915_gem_entervt_ioctl(struct drm_device *dev, void *data, } BUG_ON(!list_empty(&dev_priv->mm.active_list)); - BUG_ON(!list_empty(&dev_priv->mm.inactive_list)); mutex_unlock(&dev->struct_mutex); ret = drm_irq_install(dev); -- cgit v1.2.3-70-g09d2 From 6ce9410047f9f06c1b3336d5215402b77d6fd70f Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 4 Oct 2012 19:20:03 +0200 Subject: drm/i915: paper over a pipe-enable vs pageflip race I've discovered this on my ivb machine while stress-testing the new flip_tests. Only harmful effect observed is that the timestamp is a bit bogus. Note that this is empirical duct-tape: I've noticed that we seem to only ever miss the very first vblank irq right after enabling the pipe. And with this hack applied I couldn't reproduce the failure case anywhere else any more. Tested-by: Imre Deak Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 67912febb32..9cecfd73b0b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3253,6 +3253,16 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) if (HAS_PCH_CPT(dev)) intel_cpt_verify_modeset(dev, intel_crtc->pipe); + + /* + * There seems to be a race in PCH platform hw (at least on some + * outputs) where an enabled pipe still completes any pageflip right + * away (as if the pipe is off) instead of waiting for vblank. As soon + * as the first vblank happend, everything works as expected. Hence just + * wait for one vblank before returning to avoid strange things + * happening. + */ + intel_wait_for_vblank(dev, intel_crtc->pipe); } static void ironlake_crtc_disable(struct drm_crtc *crtc) -- cgit v1.2.3-70-g09d2 From d01f87c0ffa96cb44faa78710711eb6e974b891c Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 4 Oct 2012 09:53:43 -0700 Subject: USB: Enable LPM after a failed probe. Before a driver is probed, we want to disable USB 3.0 Link Power Management (LPM), in case the driver needs hub-initiated LPM disabled. After the probe finishes, we want to attempt to re-enable LPM, order to balance the LPM ref count. When a probe fails (such as when libusual doesn't want to bind to a USB 3.0 mass storage device), make sure to balance the LPM ref counts by re-enabling LPM. This patch should be backported to kernels as old as 3.5, that contain the commit 8306095fd2c1100e8244c09bf560f97aca5a311d "USB: Disable USB 3.0 LPM in critical sections." Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/core/driver.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index ddd820d2528..6056db7af41 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -367,6 +367,10 @@ static int usb_probe_interface(struct device *dev) intf->condition = USB_INTERFACE_UNBOUND; usb_cancel_queued_reset(intf); + /* If the LPM disable succeeded, balance the ref counts. */ + if (!lpm_disable_error) + usb_unlocked_enable_lpm(udev); + /* Unbound interfaces are always runtime-PM-disabled and -suspended */ if (driver->supports_autosuspend) pm_runtime_disable(dev); -- cgit v1.2.3-70-g09d2 From ae8963adb4ad8c5f2a89ca1d99fb7bb721e7599f Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 3 Oct 2012 11:18:05 -0700 Subject: usb: Don't enable LPM if the exit latency is zero. Some USB 3.0 devices signal that they don't implement Link PM by having all zeroes in the U1/U2 exit latencies in their SuperSpeed BOS descriptor. Don found that a Western Digital device he has experiences transfer errors when LPM is enabled. The lsusb shows the U1/U2 exit latencies are set to zero: Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 22 bNumDeviceCaps 2 SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 Latency Tolerance Messages (LTM) Supported wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 0 micro seconds bU2DevExitLat 0 micro seconds The fix is to not enable LPM for a particular link state if we find its corresponding exit latency is zero. This patch should be backported to kernels as old as 3.5, that contain the commit 1ea7e0e8e3d0f50901d335ea4178ab2aa8c88201 "USB: Add support to enable/disable USB3 link states." Signed-off-by: Sarah Sharp Reported-by: Don Zickus Tested-by: Don Zickus Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 673ee469626..8f047870932 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3415,6 +3415,16 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { int timeout; + __u8 u1_mel = udev->bos->ss_cap->bU1devExitLat; + __le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat; + + /* If the device says it doesn't have *any* exit latency to come out of + * U1 or U2, it's probably lying. Assume it doesn't implement that link + * state. + */ + if ((state == USB3_LPM_U1 && u1_mel == 0) || + (state == USB3_LPM_U2 && u2_mel == 0)) + return; /* We allow the host controller to set the U1/U2 timeout internally * first, so that it can change its schedule to account for the -- cgit v1.2.3-70-g09d2 From 65a95b75bc5afa7bbb844e222481044c1c4767eb Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 5 Oct 2012 10:32:07 -0700 Subject: usb: Send Set SEL before enabling parent U1/U2 timeout. The Set SEL control transfer tells a device the exit latencies associated with a device-initated U1 or U2 exit. Since a parent hub may initiate a transition to U1 soon after a downstream port's U1 timeout is set, we need to make sure the device receives the Set SEL transfer before the parent hub timeout is set. This patch should be backported to kernels as old as 3.5, that contain the commit 1ea7e0e8e3d0f50901d335ea4178ab2aa8c88201 "USB: Add support to enable/disable USB3 link states." Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/core/hub.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 8f047870932..b8e11fff17b 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3319,16 +3319,6 @@ static int usb_set_device_initiated_lpm(struct usb_device *udev, } if (enable) { - /* - * First, let the device know about the exit latencies - * associated with the link state we're about to enable. - */ - ret = usb_req_set_sel(udev, state); - if (ret < 0) { - dev_warn(&udev->dev, "Set SEL for device-initiated " - "%s failed.\n", usb3_lpm_names[state]); - return -EBUSY; - } /* * Now send the control transfer to enable device-initiated LPM * for either U1 or U2. @@ -3414,7 +3404,7 @@ static int usb_set_lpm_timeout(struct usb_device *udev, static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { - int timeout; + int timeout, ret; __u8 u1_mel = udev->bos->ss_cap->bU1devExitLat; __le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat; @@ -3426,6 +3416,17 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, (state == USB3_LPM_U2 && u2_mel == 0)) return; + /* + * First, let the device know about the exit latencies + * associated with the link state we're about to enable. + */ + ret = usb_req_set_sel(udev, state); + if (ret < 0) { + dev_warn(&udev->dev, "Set SEL for device-initiated %s failed.\n", + usb3_lpm_names[state]); + return; + } + /* We allow the host controller to set the U1/U2 timeout internally * first, so that it can change its schedule to account for the * additional latency to send data to a device in a lower power -- cgit v1.2.3-70-g09d2 From 1510a1a2d0946b34422fe8816187f274a5086904 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 5 Oct 2012 10:30:35 -0700 Subject: usb: trival: Fix debugging units mistake. SEL and PEL are in microseconds, not milliseconds. Also, fix a split string that will trigger checkpatch warnings. Signed-off-by: Sarah Sharp --- drivers/usb/core/hub.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index b8e11fff17b..64854d76f52 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3241,8 +3241,7 @@ static int usb_req_set_sel(struct usb_device *udev, enum usb3_link_state state) (state == USB3_LPM_U2 && (u2_sel > USB3_LPM_MAX_U2_SEL_PEL || u2_pel > USB3_LPM_MAX_U2_SEL_PEL))) { - dev_dbg(&udev->dev, "Device-initiated %s disabled due " - "to long SEL %llu ms or PEL %llu ms\n", + dev_dbg(&udev->dev, "Device-initiated %s disabled due to long SEL %llu us or PEL %llu us\n", usb3_lpm_names[state], u1_sel, u1_pel); return -EINVAL; } -- cgit v1.2.3-70-g09d2 From ca057410a8ea88ffb3ce6a581377cffa71ac01c6 Mon Sep 17 00:00:00 2001 From: Chris Ball Date: Sat, 6 Oct 2012 07:38:16 -0400 Subject: ARM: pxa: Fix build error caused by sram.h rename Commit 293b2da1b61 ("ARM: pxa: move platform_data definitions") renamed arch/arm/mach-mmp/include/mach/sram.h to include/linux/platform_data/dma-mmp_tdma.h, but didn't update mmp-pcm.c which uses the header. Fix the build error. Signed-off-by: Chris Ball Acked-by: Arnd Bergmann Signed-off-by: Mark Brown --- sound/soc/pxa/mmp-pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/pxa/mmp-pcm.c b/sound/soc/pxa/mmp-pcm.c index 73ac5463c9e..e834faf859f 100644 --- a/sound/soc/pxa/mmp-pcm.c +++ b/sound/soc/pxa/mmp-pcm.c @@ -15,13 +15,13 @@ #include #include #include +#include #include #include #include #include #include #include -#include #include struct mmp_dma_data { -- cgit v1.2.3-70-g09d2 From a92b078eab17d09ac600446954d8b0d7998c6168 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 2 Oct 2012 14:08:19 +0200 Subject: ASoC: fix documentation in soc-jack Signed-off-by: Peter Meerwald Signed-off-by: Mark Brown --- sound/soc/soc-jack.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c index fa0fd8ddae9..1ab5fe04bfc 100644 --- a/sound/soc/soc-jack.c +++ b/sound/soc/soc-jack.c @@ -22,7 +22,7 @@ /** * snd_soc_jack_new - Create a new jack - * @card: ASoC card + * @codec: ASoC codec * @id: an identifying string for this jack * @type: a bitmask of enum snd_jack_type values that can be detected by * this jack @@ -133,12 +133,13 @@ EXPORT_SYMBOL_GPL(snd_soc_jack_add_zones); /** * snd_soc_jack_get_type - Based on the mic bias value, this function returns - * the type of jack from the zones delcared in the jack type + * the type of jack from the zones declared in the jack type * + * @jack: ASoC jack * @micbias_voltage: mic bias voltage at adc channel when jack is plugged in * * Based on the mic bias value passed, this function helps identify - * the type of jack from the already delcared jack zones + * the type of jack from the already declared jack zones */ int snd_soc_jack_get_type(struct snd_soc_jack *jack, int micbias_voltage) { -- cgit v1.2.3-70-g09d2 From 57451e437796548d658d03c2c4aab659eafcd799 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 3 Oct 2012 14:33:50 +0200 Subject: ASoC: fsi: don't reschedule DMA from an atomic context shdma doesn't support transfer re-scheduling or triggering from callbacks or from atomic context. The fsi driver issues DMA transfers from a tasklet context, which is a bug. To fix it convert tasklet to a work. Reported-by: Do Q.Thang Tested-by: Do Q.Thang Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/sh/fsi.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 5328ae5539f..9d7f30774a4 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -223,7 +224,7 @@ struct fsi_stream { */ struct dma_chan *chan; struct sh_dmae_slave slave; /* see fsi_handler_init() */ - struct tasklet_struct tasklet; + struct work_struct work; dma_addr_t dma; }; @@ -1085,9 +1086,9 @@ static void fsi_dma_complete(void *data) snd_pcm_period_elapsed(io->substream); } -static void fsi_dma_do_tasklet(unsigned long data) +static void fsi_dma_do_work(struct work_struct *work) { - struct fsi_stream *io = (struct fsi_stream *)data; + struct fsi_stream *io = container_of(work, struct fsi_stream, work); struct fsi_priv *fsi = fsi_stream_to_priv(io); struct snd_soc_dai *dai; struct dma_async_tx_descriptor *desc; @@ -1129,7 +1130,7 @@ static void fsi_dma_do_tasklet(unsigned long data) * FIXME * * In DMAEngine case, codec and FSI cannot be started simultaneously - * since FSI is using tasklet. + * since FSI is using the scheduler work queue. * Therefore, in capture case, probably FSI FIFO will have got * overflow error in this point. * in that case, DMA cannot start transfer until error was cleared. @@ -1153,7 +1154,7 @@ static bool fsi_dma_filter(struct dma_chan *chan, void *param) static int fsi_dma_transfer(struct fsi_priv *fsi, struct fsi_stream *io) { - tasklet_schedule(&io->tasklet); + schedule_work(&io->work); return 0; } @@ -1195,14 +1196,14 @@ static int fsi_dma_probe(struct fsi_priv *fsi, struct fsi_stream *io, struct dev return fsi_stream_probe(fsi, dev); } - tasklet_init(&io->tasklet, fsi_dma_do_tasklet, (unsigned long)io); + INIT_WORK(&io->work, fsi_dma_do_work); return 0; } static int fsi_dma_remove(struct fsi_priv *fsi, struct fsi_stream *io) { - tasklet_kill(&io->tasklet); + cancel_work_sync(&io->work); fsi_stream_stop(fsi, io); -- cgit v1.2.3-70-g09d2 From 961a7aeafab477f63d9eef26afde9cbb8badcd0f Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 1 Oct 2012 12:29:26 +0300 Subject: ASoC: dmaengine: Correct Makefile when sound is built as module soc-dmaengine-pcm library need to be part of the snd-soc-core in order to be able to compile ASoC as modules when dmaengine is enabled on the platform. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/Makefile | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/Makefile b/sound/soc/Makefile index bcbf1d00aa8..99f32f7c069 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -1,8 +1,9 @@ snd-soc-core-objs := soc-core.o soc-dapm.o soc-jack.o soc-cache.o soc-utils.o snd-soc-core-objs += soc-pcm.o soc-compress.o soc-io.o -snd-soc-dmaengine-pcm-objs := soc-dmaengine-pcm.o -obj-$(CONFIG_SND_SOC_DMAENGINE_PCM) += snd-soc-dmaengine-pcm.o +ifneq ($(CONFIG_SND_SOC_DMAENGINE_PCM),) +snd-soc-core-objs += soc-dmaengine-pcm.o +endif obj-$(CONFIG_SND_SOC) += snd-soc-core.o obj-$(CONFIG_SND_SOC) += codecs/ -- cgit v1.2.3-70-g09d2 From 0a9426df1858f71ac84eb7eef500b4247de5e3bb Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Oct 2012 09:47:37 +0100 Subject: UAPI: (Scripted) Disintegrate arch/sh/include/asm Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones --- arch/sh/include/asm/Kbuild | 11 - arch/sh/include/asm/auxvec.h | 38 --- arch/sh/include/asm/byteorder.h | 10 - arch/sh/include/asm/cachectl.h | 19 -- arch/sh/include/asm/cpu-features.h | 26 -- arch/sh/include/asm/hw_breakpoint.h | 4 +- arch/sh/include/asm/ioctls.h | 107 -------- arch/sh/include/asm/posix_types.h | 8 - arch/sh/include/asm/posix_types_32.h | 22 -- arch/sh/include/asm/posix_types_64.h | 28 --- arch/sh/include/asm/ptrace.h | 34 +-- arch/sh/include/asm/ptrace_32.h | 75 +----- arch/sh/include/asm/ptrace_64.h | 12 +- arch/sh/include/asm/setup.h | 5 +- arch/sh/include/asm/sigcontext.h | 40 --- arch/sh/include/asm/signal.h | 15 -- arch/sh/include/asm/sockios.h | 14 -- arch/sh/include/asm/stat.h | 138 ---------- arch/sh/include/asm/swab.h | 59 ----- arch/sh/include/asm/types.h | 5 +- arch/sh/include/asm/unistd.h | 9 +- arch/sh/include/asm/unistd_32.h | 384 ---------------------------- arch/sh/include/asm/unistd_64.h | 404 ------------------------------ arch/sh/include/uapi/asm/Kbuild | 22 ++ arch/sh/include/uapi/asm/auxvec.h | 38 +++ arch/sh/include/uapi/asm/byteorder.h | 10 + arch/sh/include/uapi/asm/cachectl.h | 19 ++ arch/sh/include/uapi/asm/cpu-features.h | 26 ++ arch/sh/include/uapi/asm/hw_breakpoint.h | 0 arch/sh/include/uapi/asm/ioctls.h | 107 ++++++++ arch/sh/include/uapi/asm/posix_types.h | 7 + arch/sh/include/uapi/asm/posix_types_32.h | 22 ++ arch/sh/include/uapi/asm/posix_types_64.h | 28 +++ arch/sh/include/uapi/asm/ptrace.h | 34 +++ arch/sh/include/uapi/asm/ptrace_32.h | 77 ++++++ arch/sh/include/uapi/asm/ptrace_64.h | 14 ++ arch/sh/include/uapi/asm/setup.h | 1 + arch/sh/include/uapi/asm/sigcontext.h | 40 +++ arch/sh/include/uapi/asm/signal.h | 15 ++ arch/sh/include/uapi/asm/sockios.h | 14 ++ arch/sh/include/uapi/asm/stat.h | 138 ++++++++++ arch/sh/include/uapi/asm/swab.h | 59 +++++ arch/sh/include/uapi/asm/types.h | 1 + arch/sh/include/uapi/asm/unistd.h | 7 + arch/sh/include/uapi/asm/unistd_32.h | 384 ++++++++++++++++++++++++++++ arch/sh/include/uapi/asm/unistd_64.h | 404 ++++++++++++++++++++++++++++++ 46 files changed, 1477 insertions(+), 1457 deletions(-) delete mode 100644 arch/sh/include/asm/auxvec.h delete mode 100644 arch/sh/include/asm/byteorder.h delete mode 100644 arch/sh/include/asm/cachectl.h delete mode 100644 arch/sh/include/asm/cpu-features.h delete mode 100644 arch/sh/include/asm/ioctls.h delete mode 100644 arch/sh/include/asm/posix_types_32.h delete mode 100644 arch/sh/include/asm/posix_types_64.h delete mode 100644 arch/sh/include/asm/sigcontext.h delete mode 100644 arch/sh/include/asm/signal.h delete mode 100644 arch/sh/include/asm/sockios.h delete mode 100644 arch/sh/include/asm/stat.h delete mode 100644 arch/sh/include/asm/swab.h delete mode 100644 arch/sh/include/asm/unistd_32.h delete mode 100644 arch/sh/include/asm/unistd_64.h create mode 100644 arch/sh/include/uapi/asm/auxvec.h create mode 100644 arch/sh/include/uapi/asm/byteorder.h create mode 100644 arch/sh/include/uapi/asm/cachectl.h create mode 100644 arch/sh/include/uapi/asm/cpu-features.h create mode 100644 arch/sh/include/uapi/asm/hw_breakpoint.h create mode 100644 arch/sh/include/uapi/asm/ioctls.h create mode 100644 arch/sh/include/uapi/asm/posix_types.h create mode 100644 arch/sh/include/uapi/asm/posix_types_32.h create mode 100644 arch/sh/include/uapi/asm/posix_types_64.h create mode 100644 arch/sh/include/uapi/asm/ptrace.h create mode 100644 arch/sh/include/uapi/asm/ptrace_32.h create mode 100644 arch/sh/include/uapi/asm/ptrace_64.h create mode 100644 arch/sh/include/uapi/asm/setup.h create mode 100644 arch/sh/include/uapi/asm/sigcontext.h create mode 100644 arch/sh/include/uapi/asm/signal.h create mode 100644 arch/sh/include/uapi/asm/sockios.h create mode 100644 arch/sh/include/uapi/asm/stat.h create mode 100644 arch/sh/include/uapi/asm/swab.h create mode 100644 arch/sh/include/uapi/asm/types.h create mode 100644 arch/sh/include/uapi/asm/unistd.h create mode 100644 arch/sh/include/uapi/asm/unistd_32.h create mode 100644 arch/sh/include/uapi/asm/unistd_64.h diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild index 7b673ddcd55..f734b4478fa 100644 --- a/arch/sh/include/asm/Kbuild +++ b/arch/sh/include/asm/Kbuild @@ -1,4 +1,3 @@ -include include/asm-generic/Kbuild.asm generic-y += bitsperlong.h generic-y += cputime.h @@ -33,13 +32,3 @@ generic-y += termbits.h generic-y += termios.h generic-y += ucontext.h generic-y += xor.h - -header-y += cachectl.h -header-y += cpu-features.h -header-y += hw_breakpoint.h -header-y += posix_types_32.h -header-y += posix_types_64.h -header-y += ptrace_32.h -header-y += ptrace_64.h -header-y += unistd_32.h -header-y += unistd_64.h diff --git a/arch/sh/include/asm/auxvec.h b/arch/sh/include/asm/auxvec.h deleted file mode 100644 index 8bcc51af936..00000000000 --- a/arch/sh/include/asm/auxvec.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef __ASM_SH_AUXVEC_H -#define __ASM_SH_AUXVEC_H - -/* - * Architecture-neutral AT_ values in 0-17, leave some room - * for more of them. - */ - -/* - * This entry gives some information about the FPU initialization - * performed by the kernel. - */ -#define AT_FPUCW 18 /* Used FPU control word. */ - -#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__) -/* - * Only define this in the vsyscall case, the entry point to - * the vsyscall page gets placed here. The kernel will attempt - * to build a gate VMA we don't care about otherwise.. - */ -#define AT_SYSINFO_EHDR 33 -#endif - -/* - * More complete cache descriptions than AT_[DIU]CACHEBSIZE. If the - * value is -1, then the cache doesn't exist. Otherwise: - * - * bit 0-3: Cache set-associativity; 0 means fully associative. - * bit 4-7: Log2 of cacheline size. - * bit 8-31: Size of the entire cache >> 8. - */ -#define AT_L1I_CACHESHAPE 34 -#define AT_L1D_CACHESHAPE 35 -#define AT_L2_CACHESHAPE 36 - -#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */ - -#endif /* __ASM_SH_AUXVEC_H */ diff --git a/arch/sh/include/asm/byteorder.h b/arch/sh/include/asm/byteorder.h deleted file mode 100644 index db2f5d7cb17..00000000000 --- a/arch/sh/include/asm/byteorder.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_SH_BYTEORDER_H -#define __ASM_SH_BYTEORDER_H - -#ifdef __LITTLE_ENDIAN__ -#include -#else -#include -#endif - -#endif /* __ASM_SH_BYTEORDER_H */ diff --git a/arch/sh/include/asm/cachectl.h b/arch/sh/include/asm/cachectl.h deleted file mode 100644 index 6ffb4b7a212..00000000000 --- a/arch/sh/include/asm/cachectl.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _SH_CACHECTL_H -#define _SH_CACHECTL_H - -/* Definitions for the cacheflush system call. */ - -#define CACHEFLUSH_D_INVAL 0x1 /* invalidate (without write back) */ -#define CACHEFLUSH_D_WB 0x2 /* write back (without invalidate) */ -#define CACHEFLUSH_D_PURGE 0x3 /* writeback and invalidate */ - -#define CACHEFLUSH_I 0x4 - -/* - * Options for cacheflush system call - */ -#define ICACHE CACHEFLUSH_I /* flush instruction cache */ -#define DCACHE CACHEFLUSH_D_PURGE /* writeback and flush data cache */ -#define BCACHE (ICACHE|DCACHE) /* flush both caches */ - -#endif /* _SH_CACHECTL_H */ diff --git a/arch/sh/include/asm/cpu-features.h b/arch/sh/include/asm/cpu-features.h deleted file mode 100644 index 694abe490ed..00000000000 --- a/arch/sh/include/asm/cpu-features.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef __ASM_SH_CPU_FEATURES_H -#define __ASM_SH_CPU_FEATURES_H - -/* - * Processor flags - * - * Note: When adding a new flag, keep cpu_flags[] in - * arch/sh/kernel/setup.c in sync so symbolic name - * mapping of the processor flags has a chance of being - * reasonably accurate. - * - * These flags are also available through the ELF - * auxiliary vector as AT_HWCAP. - */ -#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */ -#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */ -#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */ -#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */ -#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */ -#define CPU_HAS_PTEA 0x0020 /* PTEA register */ -#define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */ -#define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */ -#define CPU_HAS_OP32 0x0100 /* 32-bit instruction support */ -#define CPU_HAS_PTEAEX 0x0200 /* PTE ASID Extension support */ - -#endif /* __ASM_SH_CPU_FEATURES_H */ diff --git a/arch/sh/include/asm/hw_breakpoint.h b/arch/sh/include/asm/hw_breakpoint.h index 89890f61a7b..ec9ad593c3d 100644 --- a/arch/sh/include/asm/hw_breakpoint.h +++ b/arch/sh/include/asm/hw_breakpoint.h @@ -1,7 +1,8 @@ #ifndef __ASM_SH_HW_BREAKPOINT_H #define __ASM_SH_HW_BREAKPOINT_H -#ifdef __KERNEL__ +#include + #define __ARCH_HW_BREAKPOINT_H #include @@ -66,5 +67,4 @@ extern int register_sh_ubc(struct sh_ubc *); extern struct pmu perf_ops_bp; -#endif /* __KERNEL__ */ #endif /* __ASM_SH_HW_BREAKPOINT_H */ diff --git a/arch/sh/include/asm/ioctls.h b/arch/sh/include/asm/ioctls.h deleted file mode 100644 index a6769f352bf..00000000000 --- a/arch/sh/include/asm/ioctls.h +++ /dev/null @@ -1,107 +0,0 @@ -#ifndef __ASM_SH_IOCTLS_H -#define __ASM_SH_IOCTLS_H - -#include - -#define FIOCLEX _IO('f', 1) -#define FIONCLEX _IO('f', 2) -#define FIOASYNC _IOW('f', 125, int) -#define FIONBIO _IOW('f', 126, int) -#define FIONREAD _IOR('f', 127, int) -#define TIOCINQ FIONREAD -#define FIOQSIZE _IOR('f', 128, loff_t) - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 - -#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */ -#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */ -#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */ -#define TCSETAF 0x4012741C /* _IOW('t', 28, struct termio) */ - -#define TCSBRK _IO('t', 29) -#define TCXONC _IO('t', 30) -#define TCFLSH _IO('t', 31) - -#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */ -#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */ -#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ -#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ -#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ - -#define TIOCSPGRP _IOW('t', 118, int) -#define TIOCGPGRP _IOR('t', 119, int) - -#define TIOCEXCL _IO('T', 12) /* 0x540C */ -#define TIOCNXCL _IO('T', 13) /* 0x540D */ -#define TIOCSCTTY _IO('T', 14) /* 0x540E */ - -#define TIOCSTI _IOW('T', 18, char) /* 0x5412 */ -#define TIOCMGET _IOR('T', 21, unsigned int) /* 0x5415 */ -#define TIOCMBIS _IOW('T', 22, unsigned int) /* 0x5416 */ -#define TIOCMBIC _IOW('T', 23, unsigned int) /* 0x5417 */ -#define TIOCMSET _IOW('T', 24, unsigned int) /* 0x5418 */ -# define TIOCM_LE 0x001 -# define TIOCM_DTR 0x002 -# define TIOCM_RTS 0x004 -# define TIOCM_ST 0x008 -# define TIOCM_SR 0x010 -# define TIOCM_CTS 0x020 -# define TIOCM_CAR 0x040 -# define TIOCM_RNG 0x080 -# define TIOCM_DSR 0x100 -# define TIOCM_CD TIOCM_CAR -# define TIOCM_RI TIOCM_RNG - -#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) /* 0x5419 */ -#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) /* 0x541A */ -#define TIOCLINUX _IOW('T', 28, char) /* 0x541C */ -#define TIOCCONS _IO('T', 29) /* 0x541D */ -#define TIOCGSERIAL 0x803C541E /* _IOR('T', 30, struct serial_struct) 0x541E */ -#define TIOCSSERIAL 0x403C541F /* _IOW('T', 31, struct serial_struct) 0x541F */ -#define TIOCPKT _IOW('T', 32, int) /* 0x5420 */ -# define TIOCPKT_DATA 0 -# define TIOCPKT_FLUSHREAD 1 -# define TIOCPKT_FLUSHWRITE 2 -# define TIOCPKT_STOP 4 -# define TIOCPKT_START 8 -# define TIOCPKT_NOSTOP 16 -# define TIOCPKT_DOSTOP 32 -# define TIOCPKT_IOCTL 64 - - -#define TIOCNOTTY _IO('T', 34) /* 0x5422 */ -#define TIOCSETD _IOW('T', 35, int) /* 0x5423 */ -#define TIOCGETD _IOR('T', 36, int) /* 0x5424 */ -#define TCSBRKP _IOW('T', 37, int) /* 0x5425 */ /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK _IO('T', 39) /* 0x5427 */ /* BSD compatibility */ -#define TIOCCBRK _IO('T', 40) /* 0x5428 */ /* BSD compatibility */ -#define TIOCGSID _IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */ -#define TCGETS2 _IOR('T', 42, struct termios2) -#define TCSETS2 _IOW('T', 43, struct termios2) -#define TCSETSW2 _IOW('T', 44, struct termios2) -#define TCSETSF2 _IOW('T', 45, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ -#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ -#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ -#define TIOCVHANGUP _IO('T', 0x37) - -#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */ -#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */ -#define TIOCSERSWILD _IOW('T', 85, int) /* 0x5455 */ -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x80d85458 /* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */ -#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */ - /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ -# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ -#define TIOCSERGETMULTI 0x80A8545A /* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */ -#define TIOCSERSETMULTI 0x40A8545B /* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */ - -#define TIOCMIWAIT _IO('T', 92) /* 0x545C */ /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ - -#endif /* __ASM_SH_IOCTLS_H */ diff --git a/arch/sh/include/asm/posix_types.h b/arch/sh/include/asm/posix_types.h index f08449bcbde..1aa781079b1 100644 --- a/arch/sh/include/asm/posix_types.h +++ b/arch/sh/include/asm/posix_types.h @@ -1,13 +1,5 @@ -#ifdef __KERNEL__ # ifdef CONFIG_SUPERH32 # include # else # include # endif -#else -# ifdef __SH5__ -# include -# else -# include -# endif -#endif /* __KERNEL__ */ diff --git a/arch/sh/include/asm/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h deleted file mode 100644 index ba0bdc423b0..00000000000 --- a/arch/sh/include/asm/posix_types_32.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef __ASM_SH_POSIX_TYPES_32_H -#define __ASM_SH_POSIX_TYPES_32_H - -typedef unsigned short __kernel_mode_t; -#define __kernel_mode_t __kernel_mode_t -typedef unsigned short __kernel_ipc_pid_t; -#define __kernel_ipc_pid_t __kernel_ipc_pid_t -typedef unsigned short __kernel_uid_t; -#define __kernel_uid_t __kernel_uid_t -typedef unsigned short __kernel_gid_t; -#define __kernel_gid_t __kernel_gid_t - -typedef unsigned short __kernel_old_uid_t; -#define __kernel_old_uid_t __kernel_old_uid_t -typedef unsigned short __kernel_old_gid_t; -#define __kernel_old_gid_t __kernel_old_gid_t -typedef unsigned short __kernel_old_dev_t; -#define __kernel_old_dev_t __kernel_old_dev_t - -#include - -#endif /* __ASM_SH_POSIX_TYPES_32_H */ diff --git a/arch/sh/include/asm/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h deleted file mode 100644 index 244f7e950e1..00000000000 --- a/arch/sh/include/asm/posix_types_64.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __ASM_SH_POSIX_TYPES_64_H -#define __ASM_SH_POSIX_TYPES_64_H - -typedef unsigned short __kernel_mode_t; -#define __kernel_mode_t __kernel_mode_t -typedef unsigned short __kernel_ipc_pid_t; -#define __kernel_ipc_pid_t __kernel_ipc_pid_t -typedef unsigned short __kernel_uid_t; -#define __kernel_uid_t __kernel_uid_t -typedef unsigned short __kernel_gid_t; -#define __kernel_gid_t __kernel_gid_t -typedef long unsigned int __kernel_size_t; -#define __kernel_size_t __kernel_size_t -typedef int __kernel_ssize_t; -#define __kernel_ssize_t __kernel_ssize_t -typedef int __kernel_ptrdiff_t; -#define __kernel_ptrdiff_t __kernel_ptrdiff_t - -typedef unsigned short __kernel_old_uid_t; -#define __kernel_old_uid_t __kernel_old_uid_t -typedef unsigned short __kernel_old_gid_t; -#define __kernel_old_gid_t __kernel_old_gid_t -typedef unsigned short __kernel_old_dev_t; -#define __kernel_old_dev_t __kernel_old_dev_t - -#include - -#endif /* __ASM_SH_POSIX_TYPES_64_H */ diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index a4a38dff997..2506c7db76b 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -1,42 +1,16 @@ -#ifndef __ASM_SH_PTRACE_H -#define __ASM_SH_PTRACE_H - /* * Copyright (C) 1999, 2000 Niibe Yutaka */ +#ifndef __ASM_SH_PTRACE_H +#define __ASM_SH_PTRACE_H -#define PTRACE_GETREGS 12 /* General registers */ -#define PTRACE_SETREGS 13 - -#define PTRACE_GETFPREGS 14 /* FPU registers */ -#define PTRACE_SETFPREGS 15 - -#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ - -#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ -#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ - -#define PTRACE_GETDSPREGS 55 /* DSP registers */ -#define PTRACE_SETDSPREGS 56 - -#define PT_TEXT_END_ADDR 240 -#define PT_TEXT_ADDR 244 /* &(struct user)->start_code */ -#define PT_DATA_ADDR 248 /* &(struct user)->start_data */ -#define PT_TEXT_LEN 252 - -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) -#include -#else -#include -#endif - -#ifdef __KERNEL__ #include #include #include #include #include +#include #define user_mode(regs) (((regs)->sr & 0x40000000)==0) #define kernel_stack_pointer(_regs) ((unsigned long)(_regs)->regs[15]) @@ -140,6 +114,4 @@ static inline unsigned long profile_pc(struct pt_regs *regs) #define profile_pc profile_pc #include -#endif /* __KERNEL__ */ - #endif /* __ASM_SH_PTRACE_H */ diff --git a/arch/sh/include/asm/ptrace_32.h b/arch/sh/include/asm/ptrace_32.h index 2d3e906aa72..1dd4480c536 100644 --- a/arch/sh/include/asm/ptrace_32.h +++ b/arch/sh/include/asm/ptrace_32.h @@ -1,79 +1,8 @@ #ifndef __ASM_SH_PTRACE_32_H #define __ASM_SH_PTRACE_32_H -/* - * GCC defines register number like this: - * ----------------------------- - * 0 - 15 are integer registers - * 17 - 22 are control/special registers - * 24 - 39 fp registers - * 40 - 47 xd registers - * 48 - fpscr register - * ----------------------------- - * - * We follows above, except: - * 16 --- program counter (PC) - * 22 --- syscall # - * 23 --- floating point communication register - */ -#define REG_REG0 0 -#define REG_REG15 15 +#include -#define REG_PC 16 - -#define REG_PR 17 -#define REG_SR 18 -#define REG_GBR 19 -#define REG_MACH 20 -#define REG_MACL 21 - -#define REG_SYSCALL 22 - -#define REG_FPREG0 23 -#define REG_FPREG15 38 -#define REG_XFREG0 39 -#define REG_XFREG15 54 - -#define REG_FPSCR 55 -#define REG_FPUL 56 - -/* - * This struct defines the way the registers are stored on the - * kernel stack during a system call or other kernel entry. - */ -struct pt_regs { - unsigned long regs[16]; - unsigned long pc; - unsigned long pr; - unsigned long sr; - unsigned long gbr; - unsigned long mach; - unsigned long macl; - long tra; -}; - -/* - * This struct defines the way the DSP registers are stored on the - * kernel stack during a system call or other kernel entry. - */ -struct pt_dspregs { - unsigned long a1; - unsigned long a0g; - unsigned long a1g; - unsigned long m0; - unsigned long m1; - unsigned long a0; - unsigned long x0; - unsigned long x1; - unsigned long y0; - unsigned long y1; - unsigned long dsr; - unsigned long rs; - unsigned long re; - unsigned long mod; -}; - -#ifdef __KERNEL__ #define MAX_REG_OFFSET offsetof(struct pt_regs, tra) static inline long regs_return_value(struct pt_regs *regs) @@ -81,6 +10,4 @@ static inline long regs_return_value(struct pt_regs *regs) return regs->regs[0]; } -#endif /* __KERNEL__ */ - #endif /* __ASM_SH_PTRACE_32_H */ diff --git a/arch/sh/include/asm/ptrace_64.h b/arch/sh/include/asm/ptrace_64.h index eb3fcceaf64..97f4b5660f2 100644 --- a/arch/sh/include/asm/ptrace_64.h +++ b/arch/sh/include/asm/ptrace_64.h @@ -1,16 +1,8 @@ #ifndef __ASM_SH_PTRACE_64_H #define __ASM_SH_PTRACE_64_H -struct pt_regs { - unsigned long long pc; - unsigned long long sr; - long long syscall_nr; - unsigned long long regs[63]; - unsigned long long tregs[8]; - unsigned long long pad[2]; -}; +#include -#ifdef __KERNEL__ #define MAX_REG_OFFSET offsetof(struct pt_regs, tregs[7]) static inline long regs_return_value(struct pt_regs *regs) @@ -18,6 +10,4 @@ static inline long regs_return_value(struct pt_regs *regs) return regs->regs[3]; } -#endif /* __KERNEL__ */ - #endif /* __ASM_SH_PTRACE_64_H */ diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h index 465a22df8fd..99238108e7a 100644 --- a/arch/sh/include/asm/setup.h +++ b/arch/sh/include/asm/setup.h @@ -1,9 +1,8 @@ #ifndef _SH_SETUP_H #define _SH_SETUP_H -#include +#include -#ifdef __KERNEL__ /* * This is set up by the setup-routine at boot-time */ @@ -22,6 +21,4 @@ void sh_mv_setup(void); void check_for_initrd(void); void per_cpu_trap_init(void); -#endif /* __KERNEL__ */ - #endif /* _SH_SETUP_H */ diff --git a/arch/sh/include/asm/sigcontext.h b/arch/sh/include/asm/sigcontext.h deleted file mode 100644 index 8ce1435bc0b..00000000000 --- a/arch/sh/include/asm/sigcontext.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef __ASM_SH_SIGCONTEXT_H -#define __ASM_SH_SIGCONTEXT_H - -struct sigcontext { - unsigned long oldmask; - -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) - /* CPU registers */ - unsigned long long sc_regs[63]; - unsigned long long sc_tregs[8]; - unsigned long long sc_pc; - unsigned long long sc_sr; - - /* FPU registers */ - unsigned long long sc_fpregs[32]; - unsigned int sc_fpscr; - unsigned int sc_fpvalid; -#else - /* CPU registers */ - unsigned long sc_regs[16]; - unsigned long sc_pc; - unsigned long sc_pr; - unsigned long sc_sr; - unsigned long sc_gbr; - unsigned long sc_mach; - unsigned long sc_macl; - -#if defined(__SH4__) || defined(CONFIG_CPU_SH4) || \ - defined(__SH2A__) || defined(CONFIG_CPU_SH2A) - /* FPU registers */ - unsigned long sc_fpregs[16]; - unsigned long sc_xfpregs[16]; - unsigned int sc_fpscr; - unsigned int sc_fpul; - unsigned int sc_ownedfp; -#endif -#endif -}; - -#endif /* __ASM_SH_SIGCONTEXT_H */ diff --git a/arch/sh/include/asm/signal.h b/arch/sh/include/asm/signal.h deleted file mode 100644 index 9ac530a90bc..00000000000 --- a/arch/sh/include/asm/signal.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef __ASM_SH_SIGNAL_H -#define __ASM_SH_SIGNAL_H - -#define SA_RESTORER 0x04000000 - -#include - -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#endif /* __ASM_SH_SIGNAL_H */ diff --git a/arch/sh/include/asm/sockios.h b/arch/sh/include/asm/sockios.h deleted file mode 100644 index cf8b96b1f9a..00000000000 --- a/arch/sh/include/asm/sockios.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __ASM_SH_SOCKIOS_H -#define __ASM_SH_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOGETOWN _IOR('f', 123, int) -#define FIOSETOWN _IOW('f', 124, int) - -#define SIOCATMARK _IOR('s', 7, int) -#define SIOCSPGRP _IOW('s', 8, pid_t) -#define SIOCGPGRP _IOR('s', 9, pid_t) - -#define SIOCGSTAMP _IOR('s', 100, struct timeval) /* Get stamp (timeval) */ -#define SIOCGSTAMPNS _IOR('s', 101, struct timespec) /* Get stamp (timespec) */ -#endif /* __ASM_SH_SOCKIOS_H */ diff --git a/arch/sh/include/asm/stat.h b/arch/sh/include/asm/stat.h deleted file mode 100644 index e1810cc6e3d..00000000000 --- a/arch/sh/include/asm/stat.h +++ /dev/null @@ -1,138 +0,0 @@ -#ifndef __ASM_SH_STAT_H -#define __ASM_SH_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) -struct stat { - unsigned short st_dev; - unsigned short __pad1; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned short __pad2; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned short st_dev; - unsigned char __pad0[10]; - - unsigned long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned short st_rdev; - unsigned char __pad3[10]; - - long long st_size; - unsigned long st_blksize; - - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long __pad4; /* future possible st_blocks high bits */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ - - unsigned long __unused1; - unsigned long __unused2; -}; -#else -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned long st_rdev; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned long long st_dev; - unsigned char __pad0[4]; - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned long long st_rdev; - unsigned char __pad3[4]; - - long long st_size; - unsigned long st_blksize; - - unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long long st_ino; -}; - -#define STAT_HAVE_NSEC 1 -#endif - -#endif /* __ASM_SH_STAT_H */ diff --git a/arch/sh/include/asm/swab.h b/arch/sh/include/asm/swab.h deleted file mode 100644 index 1cd09767a7a..00000000000 --- a/arch/sh/include/asm/swab.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef __ASM_SH_SWAB_H -#define __ASM_SH_SWAB_H - -/* - * Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2000, 2001 Paolo Alberelli - */ -#include -#include -#include - -static inline __attribute_const__ __u32 __arch_swab32(__u32 x) -{ - __asm__( -#ifdef __SH5__ - "byterev %1, %0\n\t" - "shari %0, 32, %0" -#else - "swap.b %1, %0\n\t" - "swap.w %0, %0\n\t" - "swap.b %0, %0" -#endif - : "=r" (x) - : "r" (x)); - - return x; -} -#define __arch_swab32 __arch_swab32 - -static inline __attribute_const__ __u16 __arch_swab16(__u16 x) -{ - __asm__( -#ifdef __SH5__ - "byterev %1, %0\n\t" - "shari %0, 32, %0" -#else - "swap.b %1, %0" -#endif - : "=r" (x) - : "r" (x)); - - return x; -} -#define __arch_swab16 __arch_swab16 - -static inline __u64 __arch_swab64(__u64 val) -{ - union { - struct { __u32 a,b; } s; - __u64 u; - } v, w; - v.u = val; - w.s.b = __arch_swab32(v.s.a); - w.s.a = __arch_swab32(v.s.b); - return w.u; -} -#define __arch_swab64 __arch_swab64 - -#endif /* __ASM_SH_SWAB_H */ diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h index f8421f7ad63..6a31053fa5e 100644 --- a/arch/sh/include/asm/types.h +++ b/arch/sh/include/asm/types.h @@ -1,12 +1,11 @@ #ifndef __ASM_SH_TYPES_H #define __ASM_SH_TYPES_H -#include +#include /* * These aren't exported outside the kernel to avoid name space clashes */ -#ifdef __KERNEL__ #ifndef __ASSEMBLY__ #ifdef CONFIG_SUPERH32 @@ -18,6 +17,4 @@ typedef u64 reg_size_t; #endif #endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ - #endif /* __ASM_SH_TYPES_H */ diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h index 307201a854f..38956dfa76f 100644 --- a/arch/sh/include/asm/unistd.h +++ b/arch/sh/include/asm/unistd.h @@ -1,4 +1,3 @@ -#ifdef __KERNEL__ # ifdef CONFIG_SUPERH32 # include # else @@ -38,10 +37,4 @@ */ # define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") -#else -# ifdef __SH5__ -# include -# else -# include -# endif -#endif +#include diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h deleted file mode 100644 index 72fd1e06100..00000000000 --- a/arch/sh/include/asm/unistd_32.h +++ /dev/null @@ -1,384 +0,0 @@ -#ifndef __ASM_SH_UNISTD_32_H -#define __ASM_SH_UNISTD_32_H - -/* - * Copyright (C) 1999 Niibe Yutaka - */ - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 - /* 17 was sys_break */ -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 - /* 31 was sys_stty */ - /* 32 was sys_gtty */ -#define __NR_access 33 -#define __NR_nice 34 - /* 35 was sys_ftime */ -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 - /* 44 was sys_prof */ -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 - /* 53 was sys_lock */ -#define __NR_ioctl 54 -#define __NR_fcntl 55 - /* 56 was sys_mpx */ -#define __NR_setpgid 57 - /* 58 was sys_ulimit */ - /* 59 was sys_olduname */ -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 - /* 82 was sys_oldselect */ -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 - /* 98 was sys_profil */ -#define __NR_statfs 99 -#define __NR_fstatfs 100 - /* 101 was sys_ioperm */ -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 - /* 110 was sys_iopl */ -#define __NR_vhangup 111 - /* 112 was sys_idle */ - /* 113 was sys_vm86old */ -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_cacheflush 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 - /* 127 was sys_create_module */ -#define __NR_init_module 128 -#define __NR_delete_module 129 - /* 130 was sys_get_kernel_syms */ -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 - /* 137 was sys_afs_syscall */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 - /* 166 was sys_vm86 */ - /* 167 was sys_query_module */ -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 - /* 188 reserved for sys_getpmsg */ - /* 189 reserved for sys_putpmsg */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 -#define __NR_getdents64 220 -#define __NR_fcntl64 221 - /* 222 is reserved for tux */ - /* 223 is unused */ -#define __NR_gettid 224 -#define __NR_readahead 225 -#define __NR_setxattr 226 -#define __NR_lsetxattr 227 -#define __NR_fsetxattr 228 -#define __NR_getxattr 229 -#define __NR_lgetxattr 230 -#define __NR_fgetxattr 231 -#define __NR_listxattr 232 -#define __NR_llistxattr 233 -#define __NR_flistxattr 234 -#define __NR_removexattr 235 -#define __NR_lremovexattr 236 -#define __NR_fremovexattr 237 -#define __NR_tkill 238 -#define __NR_sendfile64 239 -#define __NR_futex 240 -#define __NR_sched_setaffinity 241 -#define __NR_sched_getaffinity 242 - /* 243 is reserved for set_thread_area */ - /* 244 is reserved for get_thread_area */ -#define __NR_io_setup 245 -#define __NR_io_destroy 246 -#define __NR_io_getevents 247 -#define __NR_io_submit 248 -#define __NR_io_cancel 249 -#define __NR_fadvise64 250 - /* 251 is unused */ -#define __NR_exit_group 252 -#define __NR_lookup_dcookie 253 -#define __NR_epoll_create 254 -#define __NR_epoll_ctl 255 -#define __NR_epoll_wait 256 -#define __NR_remap_file_pages 257 -#define __NR_set_tid_address 258 -#define __NR_timer_create 259 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 268 -#define __NR_fstatfs64 269 -#define __NR_tgkill 270 -#define __NR_utimes 271 -#define __NR_fadvise64_64 272 - /* 273 is reserved for vserver */ -#define __NR_mbind 274 -#define __NR_get_mempolicy 275 -#define __NR_set_mempolicy 276 -#define __NR_mq_open 277 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) -#define __NR_kexec_load 283 -#define __NR_waitid 284 -#define __NR_add_key 285 -#define __NR_request_key 286 -#define __NR_keyctl 287 -#define __NR_ioprio_set 288 -#define __NR_ioprio_get 289 -#define __NR_inotify_init 290 -#define __NR_inotify_add_watch 291 -#define __NR_inotify_rm_watch 292 - /* 293 is unused */ -#define __NR_migrate_pages 294 -#define __NR_openat 295 -#define __NR_mkdirat 296 -#define __NR_mknodat 297 -#define __NR_fchownat 298 -#define __NR_futimesat 299 -#define __NR_fstatat64 300 -#define __NR_unlinkat 301 -#define __NR_renameat 302 -#define __NR_linkat 303 -#define __NR_symlinkat 304 -#define __NR_readlinkat 305 -#define __NR_fchmodat 306 -#define __NR_faccessat 307 -#define __NR_pselect6 308 -#define __NR_ppoll 309 -#define __NR_unshare 310 -#define __NR_set_robust_list 311 -#define __NR_get_robust_list 312 -#define __NR_splice 313 -#define __NR_sync_file_range 314 -#define __NR_tee 315 -#define __NR_vmsplice 316 -#define __NR_move_pages 317 -#define __NR_getcpu 318 -#define __NR_epoll_pwait 319 -#define __NR_utimensat 320 -#define __NR_signalfd 321 -#define __NR_timerfd_create 322 -#define __NR_eventfd 323 -#define __NR_fallocate 324 -#define __NR_timerfd_settime 325 -#define __NR_timerfd_gettime 326 -#define __NR_signalfd4 327 -#define __NR_eventfd2 328 -#define __NR_epoll_create1 329 -#define __NR_dup3 330 -#define __NR_pipe2 331 -#define __NR_inotify_init1 332 -#define __NR_preadv 333 -#define __NR_pwritev 334 -#define __NR_rt_tgsigqueueinfo 335 -#define __NR_perf_event_open 336 -#define __NR_fanotify_init 337 -#define __NR_fanotify_mark 338 -#define __NR_prlimit64 339 - -/* Non-multiplexed socket family */ -#define __NR_socket 340 -#define __NR_bind 341 -#define __NR_connect 342 -#define __NR_listen 343 -#define __NR_accept 344 -#define __NR_getsockname 345 -#define __NR_getpeername 346 -#define __NR_socketpair 347 -#define __NR_send 348 -#define __NR_sendto 349 -#define __NR_recv 350 -#define __NR_recvfrom 351 -#define __NR_shutdown 352 -#define __NR_setsockopt 353 -#define __NR_getsockopt 354 -#define __NR_sendmsg 355 -#define __NR_recvmsg 356 -#define __NR_recvmmsg 357 -#define __NR_accept4 358 -#define __NR_name_to_handle_at 359 -#define __NR_open_by_handle_at 360 -#define __NR_clock_adjtime 361 -#define __NR_syncfs 362 -#define __NR_sendmmsg 363 -#define __NR_setns 364 -#define __NR_process_vm_readv 365 -#define __NR_process_vm_writev 366 - -#define NR_syscalls 367 - -#endif /* __ASM_SH_UNISTD_32_H */ diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h deleted file mode 100644 index a28edc32969..00000000000 --- a/arch/sh/include/asm/unistd_64.h +++ /dev/null @@ -1,404 +0,0 @@ -#ifndef __ASM_SH_UNISTD_64_H -#define __ASM_SH_UNISTD_64_H - -/* - * include/asm-sh/unistd_64.h - * - * This file contains the system call numbers. - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 - 2007 Paul Mundt - * Copyright (C) 2004 Sean McGoogan - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 - /* 17 was sys_break */ -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 - /* 31 was sys_stty */ - /* 32 was sys_gtty */ -#define __NR_access 33 -#define __NR_nice 34 - /* 35 was sys_ftime */ -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 - /* 44 was sys_prof */ -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 - /* 53 was sys_lock */ -#define __NR_ioctl 54 -#define __NR_fcntl 55 - /* 56 was sys_mpx */ -#define __NR_setpgid 57 - /* 58 was sys_ulimit */ - /* 59 was sys_olduname */ -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 - /* 82 was sys_select */ -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 - /* 98 was sys_profil */ -#define __NR_statfs 99 -#define __NR_fstatfs 100 - /* 101 was sys_ioperm */ -#define __NR_socketcall 102 /* old implementation of socket systemcall */ -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 - /* 110 was sys_iopl */ -#define __NR_vhangup 111 - /* 112 was sys_idle */ - /* 113 was sys_vm86old */ -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_cacheflush 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 - /* 127 was sys_create_module */ -#define __NR_init_module 128 -#define __NR_delete_module 129 - /* 130 was sys_get_kernel_syms */ -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 - /* 137 was sys_afs_syscall */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 - /* 166 was sys_vm86 */ - /* 167 was sys_query_module */ -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 - /* 188 reserved for getpmsg */ - /* 189 reserved for putpmsg */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 - -/* Non-multiplexed socket family */ -#define __NR_socket 220 -#define __NR_bind 221 -#define __NR_connect 222 -#define __NR_listen 223 -#define __NR_accept 224 -#define __NR_getsockname 225 -#define __NR_getpeername 226 -#define __NR_socketpair 227 -#define __NR_send 228 -#define __NR_sendto 229 -#define __NR_recv 230 -#define __NR_recvfrom 231 -#define __NR_shutdown 232 -#define __NR_setsockopt 233 -#define __NR_getsockopt 234 -#define __NR_sendmsg 235 -#define __NR_recvmsg 236 - -/* Non-multiplexed IPC family */ -#define __NR_semop 237 -#define __NR_semget 238 -#define __NR_semctl 239 -#define __NR_msgsnd 240 -#define __NR_msgrcv 241 -#define __NR_msgget 242 -#define __NR_msgctl 243 -#define __NR_shmat 244 -#define __NR_shmdt 245 -#define __NR_shmget 246 -#define __NR_shmctl 247 - -#define __NR_getdents64 248 -#define __NR_fcntl64 249 - /* 250 is reserved for tux */ - /* 251 is unused */ -#define __NR_gettid 252 -#define __NR_readahead 253 -#define __NR_setxattr 254 -#define __NR_lsetxattr 255 -#define __NR_fsetxattr 256 -#define __NR_getxattr 257 -#define __NR_lgetxattr 258 -#define __NR_fgetxattr 269 -#define __NR_listxattr 260 -#define __NR_llistxattr 261 -#define __NR_flistxattr 262 -#define __NR_removexattr 263 -#define __NR_lremovexattr 264 -#define __NR_fremovexattr 265 -#define __NR_tkill 266 -#define __NR_sendfile64 267 -#define __NR_futex 268 -#define __NR_sched_setaffinity 269 -#define __NR_sched_getaffinity 270 - /* 271 is reserved for set_thread_area */ - /* 272 is reserved for get_thread_area */ -#define __NR_io_setup 273 -#define __NR_io_destroy 274 -#define __NR_io_getevents 275 -#define __NR_io_submit 276 -#define __NR_io_cancel 277 -#define __NR_fadvise64 278 - /* 279 is unused */ -#define __NR_exit_group 280 - -#define __NR_lookup_dcookie 281 -#define __NR_epoll_create 282 -#define __NR_epoll_ctl 283 -#define __NR_epoll_wait 284 -#define __NR_remap_file_pages 285 -#define __NR_set_tid_address 286 -#define __NR_timer_create 287 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 296 -#define __NR_fstatfs64 297 -#define __NR_tgkill 298 -#define __NR_utimes 299 -#define __NR_fadvise64_64 300 - /* 301 is reserved for vserver */ - /* 302 is reserved for mbind */ - /* 303 is reserved for get_mempolicy */ - /* 304 is reserved for set_mempolicy */ -#define __NR_mq_open 305 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) - /* 311 is reserved for kexec */ -#define __NR_waitid 312 -#define __NR_add_key 313 -#define __NR_request_key 314 -#define __NR_keyctl 315 -#define __NR_ioprio_set 316 -#define __NR_ioprio_get 317 -#define __NR_inotify_init 318 -#define __NR_inotify_add_watch 319 -#define __NR_inotify_rm_watch 320 - /* 321 is unused */ -#define __NR_migrate_pages 322 -#define __NR_openat 323 -#define __NR_mkdirat 324 -#define __NR_mknodat 325 -#define __NR_fchownat 326 -#define __NR_futimesat 327 -#define __NR_fstatat64 328 -#define __NR_unlinkat 329 -#define __NR_renameat 330 -#define __NR_linkat 331 -#define __NR_symlinkat 332 -#define __NR_readlinkat 333 -#define __NR_fchmodat 334 -#define __NR_faccessat 335 -#define __NR_pselect6 336 -#define __NR_ppoll 337 -#define __NR_unshare 338 -#define __NR_set_robust_list 339 -#define __NR_get_robust_list 340 -#define __NR_splice 341 -#define __NR_sync_file_range 342 -#define __NR_tee 343 -#define __NR_vmsplice 344 -#define __NR_move_pages 345 -#define __NR_getcpu 346 -#define __NR_epoll_pwait 347 -#define __NR_utimensat 348 -#define __NR_signalfd 349 -#define __NR_timerfd_create 350 -#define __NR_eventfd 351 -#define __NR_fallocate 352 -#define __NR_timerfd_settime 353 -#define __NR_timerfd_gettime 354 -#define __NR_signalfd4 355 -#define __NR_eventfd2 356 -#define __NR_epoll_create1 357 -#define __NR_dup3 358 -#define __NR_pipe2 359 -#define __NR_inotify_init1 360 -#define __NR_preadv 361 -#define __NR_pwritev 362 -#define __NR_rt_tgsigqueueinfo 363 -#define __NR_perf_event_open 364 -#define __NR_recvmmsg 365 -#define __NR_accept4 366 -#define __NR_fanotify_init 367 -#define __NR_fanotify_mark 368 -#define __NR_prlimit64 369 -#define __NR_name_to_handle_at 370 -#define __NR_open_by_handle_at 371 -#define __NR_clock_adjtime 372 -#define __NR_syncfs 373 -#define __NR_sendmmsg 374 -#define __NR_setns 375 -#define __NR_process_vm_readv 376 -#define __NR_process_vm_writev 377 - -#define NR_syscalls 378 - -#endif /* __ASM_SH_UNISTD_64_H */ diff --git a/arch/sh/include/uapi/asm/Kbuild b/arch/sh/include/uapi/asm/Kbuild index baebb3da1d4..60613ae7851 100644 --- a/arch/sh/include/uapi/asm/Kbuild +++ b/arch/sh/include/uapi/asm/Kbuild @@ -1,3 +1,25 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +header-y += auxvec.h +header-y += byteorder.h +header-y += cachectl.h +header-y += cpu-features.h +header-y += hw_breakpoint.h +header-y += ioctls.h +header-y += posix_types.h +header-y += posix_types_32.h +header-y += posix_types_64.h +header-y += ptrace.h +header-y += ptrace_32.h +header-y += ptrace_64.h +header-y += setup.h +header-y += sigcontext.h +header-y += signal.h +header-y += sockios.h +header-y += stat.h +header-y += swab.h +header-y += types.h +header-y += unistd.h +header-y += unistd_32.h +header-y += unistd_64.h diff --git a/arch/sh/include/uapi/asm/auxvec.h b/arch/sh/include/uapi/asm/auxvec.h new file mode 100644 index 00000000000..8bcc51af936 --- /dev/null +++ b/arch/sh/include/uapi/asm/auxvec.h @@ -0,0 +1,38 @@ +#ifndef __ASM_SH_AUXVEC_H +#define __ASM_SH_AUXVEC_H + +/* + * Architecture-neutral AT_ values in 0-17, leave some room + * for more of them. + */ + +/* + * This entry gives some information about the FPU initialization + * performed by the kernel. + */ +#define AT_FPUCW 18 /* Used FPU control word. */ + +#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__) +/* + * Only define this in the vsyscall case, the entry point to + * the vsyscall page gets placed here. The kernel will attempt + * to build a gate VMA we don't care about otherwise.. + */ +#define AT_SYSINFO_EHDR 33 +#endif + +/* + * More complete cache descriptions than AT_[DIU]CACHEBSIZE. If the + * value is -1, then the cache doesn't exist. Otherwise: + * + * bit 0-3: Cache set-associativity; 0 means fully associative. + * bit 4-7: Log2 of cacheline size. + * bit 8-31: Size of the entire cache >> 8. + */ +#define AT_L1I_CACHESHAPE 34 +#define AT_L1D_CACHESHAPE 35 +#define AT_L2_CACHESHAPE 36 + +#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */ + +#endif /* __ASM_SH_AUXVEC_H */ diff --git a/arch/sh/include/uapi/asm/byteorder.h b/arch/sh/include/uapi/asm/byteorder.h new file mode 100644 index 00000000000..db2f5d7cb17 --- /dev/null +++ b/arch/sh/include/uapi/asm/byteorder.h @@ -0,0 +1,10 @@ +#ifndef __ASM_SH_BYTEORDER_H +#define __ASM_SH_BYTEORDER_H + +#ifdef __LITTLE_ENDIAN__ +#include +#else +#include +#endif + +#endif /* __ASM_SH_BYTEORDER_H */ diff --git a/arch/sh/include/uapi/asm/cachectl.h b/arch/sh/include/uapi/asm/cachectl.h new file mode 100644 index 00000000000..6ffb4b7a212 --- /dev/null +++ b/arch/sh/include/uapi/asm/cachectl.h @@ -0,0 +1,19 @@ +#ifndef _SH_CACHECTL_H +#define _SH_CACHECTL_H + +/* Definitions for the cacheflush system call. */ + +#define CACHEFLUSH_D_INVAL 0x1 /* invalidate (without write back) */ +#define CACHEFLUSH_D_WB 0x2 /* write back (without invalidate) */ +#define CACHEFLUSH_D_PURGE 0x3 /* writeback and invalidate */ + +#define CACHEFLUSH_I 0x4 + +/* + * Options for cacheflush system call + */ +#define ICACHE CACHEFLUSH_I /* flush instruction cache */ +#define DCACHE CACHEFLUSH_D_PURGE /* writeback and flush data cache */ +#define BCACHE (ICACHE|DCACHE) /* flush both caches */ + +#endif /* _SH_CACHECTL_H */ diff --git a/arch/sh/include/uapi/asm/cpu-features.h b/arch/sh/include/uapi/asm/cpu-features.h new file mode 100644 index 00000000000..694abe490ed --- /dev/null +++ b/arch/sh/include/uapi/asm/cpu-features.h @@ -0,0 +1,26 @@ +#ifndef __ASM_SH_CPU_FEATURES_H +#define __ASM_SH_CPU_FEATURES_H + +/* + * Processor flags + * + * Note: When adding a new flag, keep cpu_flags[] in + * arch/sh/kernel/setup.c in sync so symbolic name + * mapping of the processor flags has a chance of being + * reasonably accurate. + * + * These flags are also available through the ELF + * auxiliary vector as AT_HWCAP. + */ +#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */ +#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */ +#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */ +#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */ +#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */ +#define CPU_HAS_PTEA 0x0020 /* PTEA register */ +#define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */ +#define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */ +#define CPU_HAS_OP32 0x0100 /* 32-bit instruction support */ +#define CPU_HAS_PTEAEX 0x0200 /* PTE ASID Extension support */ + +#endif /* __ASM_SH_CPU_FEATURES_H */ diff --git a/arch/sh/include/uapi/asm/hw_breakpoint.h b/arch/sh/include/uapi/asm/hw_breakpoint.h new file mode 100644 index 00000000000..e69de29bb2d diff --git a/arch/sh/include/uapi/asm/ioctls.h b/arch/sh/include/uapi/asm/ioctls.h new file mode 100644 index 00000000000..a6769f352bf --- /dev/null +++ b/arch/sh/include/uapi/asm/ioctls.h @@ -0,0 +1,107 @@ +#ifndef __ASM_SH_IOCTLS_H +#define __ASM_SH_IOCTLS_H + +#include + +#define FIOCLEX _IO('f', 1) +#define FIONCLEX _IO('f', 2) +#define FIOASYNC _IOW('f', 125, int) +#define FIONBIO _IOW('f', 126, int) +#define FIONREAD _IOR('f', 127, int) +#define TIOCINQ FIONREAD +#define FIOQSIZE _IOR('f', 128, loff_t) + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 + +#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */ +#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */ +#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */ +#define TCSETAF 0x4012741C /* _IOW('t', 28, struct termio) */ + +#define TCSBRK _IO('t', 29) +#define TCXONC _IO('t', 30) +#define TCFLSH _IO('t', 31) + +#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */ +#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */ +#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ +#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ +#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ + +#define TIOCSPGRP _IOW('t', 118, int) +#define TIOCGPGRP _IOR('t', 119, int) + +#define TIOCEXCL _IO('T', 12) /* 0x540C */ +#define TIOCNXCL _IO('T', 13) /* 0x540D */ +#define TIOCSCTTY _IO('T', 14) /* 0x540E */ + +#define TIOCSTI _IOW('T', 18, char) /* 0x5412 */ +#define TIOCMGET _IOR('T', 21, unsigned int) /* 0x5415 */ +#define TIOCMBIS _IOW('T', 22, unsigned int) /* 0x5416 */ +#define TIOCMBIC _IOW('T', 23, unsigned int) /* 0x5417 */ +#define TIOCMSET _IOW('T', 24, unsigned int) /* 0x5418 */ +# define TIOCM_LE 0x001 +# define TIOCM_DTR 0x002 +# define TIOCM_RTS 0x004 +# define TIOCM_ST 0x008 +# define TIOCM_SR 0x010 +# define TIOCM_CTS 0x020 +# define TIOCM_CAR 0x040 +# define TIOCM_RNG 0x080 +# define TIOCM_DSR 0x100 +# define TIOCM_CD TIOCM_CAR +# define TIOCM_RI TIOCM_RNG + +#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) /* 0x5419 */ +#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) /* 0x541A */ +#define TIOCLINUX _IOW('T', 28, char) /* 0x541C */ +#define TIOCCONS _IO('T', 29) /* 0x541D */ +#define TIOCGSERIAL 0x803C541E /* _IOR('T', 30, struct serial_struct) 0x541E */ +#define TIOCSSERIAL 0x403C541F /* _IOW('T', 31, struct serial_struct) 0x541F */ +#define TIOCPKT _IOW('T', 32, int) /* 0x5420 */ +# define TIOCPKT_DATA 0 +# define TIOCPKT_FLUSHREAD 1 +# define TIOCPKT_FLUSHWRITE 2 +# define TIOCPKT_STOP 4 +# define TIOCPKT_START 8 +# define TIOCPKT_NOSTOP 16 +# define TIOCPKT_DOSTOP 32 +# define TIOCPKT_IOCTL 64 + + +#define TIOCNOTTY _IO('T', 34) /* 0x5422 */ +#define TIOCSETD _IOW('T', 35, int) /* 0x5423 */ +#define TIOCGETD _IOR('T', 36, int) /* 0x5424 */ +#define TCSBRKP _IOW('T', 37, int) /* 0x5425 */ /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK _IO('T', 39) /* 0x5427 */ /* BSD compatibility */ +#define TIOCCBRK _IO('T', 40) /* 0x5428 */ /* BSD compatibility */ +#define TIOCGSID _IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */ +#define TCGETS2 _IOR('T', 42, struct termios2) +#define TCSETS2 _IOW('T', 43, struct termios2) +#define TCSETSW2 _IOW('T', 44, struct termios2) +#define TCSETSF2 _IOW('T', 45, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP _IO('T', 0x37) + +#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */ +#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */ +#define TIOCSERSWILD _IOW('T', 85, int) /* 0x5455 */ +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x80d85458 /* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */ +#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */ + /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ +# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ +#define TIOCSERGETMULTI 0x80A8545A /* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */ +#define TIOCSERSETMULTI 0x40A8545B /* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */ + +#define TIOCMIWAIT _IO('T', 92) /* 0x545C */ /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ + +#endif /* __ASM_SH_IOCTLS_H */ diff --git a/arch/sh/include/uapi/asm/posix_types.h b/arch/sh/include/uapi/asm/posix_types.h new file mode 100644 index 00000000000..dc55e5adfe1 --- /dev/null +++ b/arch/sh/include/uapi/asm/posix_types.h @@ -0,0 +1,7 @@ +#ifndef __KERNEL__ +# ifdef __SH5__ +# include +# else +# include +# endif +#endif /* __KERNEL__ */ diff --git a/arch/sh/include/uapi/asm/posix_types_32.h b/arch/sh/include/uapi/asm/posix_types_32.h new file mode 100644 index 00000000000..ba0bdc423b0 --- /dev/null +++ b/arch/sh/include/uapi/asm/posix_types_32.h @@ -0,0 +1,22 @@ +#ifndef __ASM_SH_POSIX_TYPES_32_H +#define __ASM_SH_POSIX_TYPES_32_H + +typedef unsigned short __kernel_mode_t; +#define __kernel_mode_t __kernel_mode_t +typedef unsigned short __kernel_ipc_pid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t +typedef unsigned short __kernel_uid_t; +#define __kernel_uid_t __kernel_uid_t +typedef unsigned short __kernel_gid_t; +#define __kernel_gid_t __kernel_gid_t + +typedef unsigned short __kernel_old_uid_t; +#define __kernel_old_uid_t __kernel_old_uid_t +typedef unsigned short __kernel_old_gid_t; +#define __kernel_old_gid_t __kernel_old_gid_t +typedef unsigned short __kernel_old_dev_t; +#define __kernel_old_dev_t __kernel_old_dev_t + +#include + +#endif /* __ASM_SH_POSIX_TYPES_32_H */ diff --git a/arch/sh/include/uapi/asm/posix_types_64.h b/arch/sh/include/uapi/asm/posix_types_64.h new file mode 100644 index 00000000000..244f7e950e1 --- /dev/null +++ b/arch/sh/include/uapi/asm/posix_types_64.h @@ -0,0 +1,28 @@ +#ifndef __ASM_SH_POSIX_TYPES_64_H +#define __ASM_SH_POSIX_TYPES_64_H + +typedef unsigned short __kernel_mode_t; +#define __kernel_mode_t __kernel_mode_t +typedef unsigned short __kernel_ipc_pid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t +typedef unsigned short __kernel_uid_t; +#define __kernel_uid_t __kernel_uid_t +typedef unsigned short __kernel_gid_t; +#define __kernel_gid_t __kernel_gid_t +typedef long unsigned int __kernel_size_t; +#define __kernel_size_t __kernel_size_t +typedef int __kernel_ssize_t; +#define __kernel_ssize_t __kernel_ssize_t +typedef int __kernel_ptrdiff_t; +#define __kernel_ptrdiff_t __kernel_ptrdiff_t + +typedef unsigned short __kernel_old_uid_t; +#define __kernel_old_uid_t __kernel_old_uid_t +typedef unsigned short __kernel_old_gid_t; +#define __kernel_old_gid_t __kernel_old_gid_t +typedef unsigned short __kernel_old_dev_t; +#define __kernel_old_dev_t __kernel_old_dev_t + +#include + +#endif /* __ASM_SH_POSIX_TYPES_64_H */ diff --git a/arch/sh/include/uapi/asm/ptrace.h b/arch/sh/include/uapi/asm/ptrace.h new file mode 100644 index 00000000000..8b8c5aca9c2 --- /dev/null +++ b/arch/sh/include/uapi/asm/ptrace.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 1999, 2000 Niibe Yutaka + */ +#ifndef _UAPI__ASM_SH_PTRACE_H +#define _UAPI__ASM_SH_PTRACE_H + + +#define PTRACE_GETREGS 12 /* General registers */ +#define PTRACE_SETREGS 13 + +#define PTRACE_GETFPREGS 14 /* FPU registers */ +#define PTRACE_SETFPREGS 15 + +#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ + +#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ +#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ + +#define PTRACE_GETDSPREGS 55 /* DSP registers */ +#define PTRACE_SETDSPREGS 56 + +#define PT_TEXT_END_ADDR 240 +#define PT_TEXT_ADDR 244 /* &(struct user)->start_code */ +#define PT_DATA_ADDR 248 /* &(struct user)->start_data */ +#define PT_TEXT_LEN 252 + +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) +#include +#else +#include +#endif + + +#endif /* _UAPI__ASM_SH_PTRACE_H */ diff --git a/arch/sh/include/uapi/asm/ptrace_32.h b/arch/sh/include/uapi/asm/ptrace_32.h new file mode 100644 index 00000000000..926e0cefc2b --- /dev/null +++ b/arch/sh/include/uapi/asm/ptrace_32.h @@ -0,0 +1,77 @@ +#ifndef _UAPI__ASM_SH_PTRACE_32_H +#define _UAPI__ASM_SH_PTRACE_32_H + +/* + * GCC defines register number like this: + * ----------------------------- + * 0 - 15 are integer registers + * 17 - 22 are control/special registers + * 24 - 39 fp registers + * 40 - 47 xd registers + * 48 - fpscr register + * ----------------------------- + * + * We follows above, except: + * 16 --- program counter (PC) + * 22 --- syscall # + * 23 --- floating point communication register + */ +#define REG_REG0 0 +#define REG_REG15 15 + +#define REG_PC 16 + +#define REG_PR 17 +#define REG_SR 18 +#define REG_GBR 19 +#define REG_MACH 20 +#define REG_MACL 21 + +#define REG_SYSCALL 22 + +#define REG_FPREG0 23 +#define REG_FPREG15 38 +#define REG_XFREG0 39 +#define REG_XFREG15 54 + +#define REG_FPSCR 55 +#define REG_FPUL 56 + +/* + * This struct defines the way the registers are stored on the + * kernel stack during a system call or other kernel entry. + */ +struct pt_regs { + unsigned long regs[16]; + unsigned long pc; + unsigned long pr; + unsigned long sr; + unsigned long gbr; + unsigned long mach; + unsigned long macl; + long tra; +}; + +/* + * This struct defines the way the DSP registers are stored on the + * kernel stack during a system call or other kernel entry. + */ +struct pt_dspregs { + unsigned long a1; + unsigned long a0g; + unsigned long a1g; + unsigned long m0; + unsigned long m1; + unsigned long a0; + unsigned long x0; + unsigned long x1; + unsigned long y0; + unsigned long y1; + unsigned long dsr; + unsigned long rs; + unsigned long re; + unsigned long mod; +}; + + +#endif /* _UAPI__ASM_SH_PTRACE_32_H */ diff --git a/arch/sh/include/uapi/asm/ptrace_64.h b/arch/sh/include/uapi/asm/ptrace_64.h new file mode 100644 index 00000000000..0e52ee83e94 --- /dev/null +++ b/arch/sh/include/uapi/asm/ptrace_64.h @@ -0,0 +1,14 @@ +#ifndef _UAPI__ASM_SH_PTRACE_64_H +#define _UAPI__ASM_SH_PTRACE_64_H + +struct pt_regs { + unsigned long long pc; + unsigned long long sr; + long long syscall_nr; + unsigned long long regs[63]; + unsigned long long tregs[8]; + unsigned long long pad[2]; +}; + + +#endif /* _UAPI__ASM_SH_PTRACE_64_H */ diff --git a/arch/sh/include/uapi/asm/setup.h b/arch/sh/include/uapi/asm/setup.h new file mode 100644 index 00000000000..552df83f1a4 --- /dev/null +++ b/arch/sh/include/uapi/asm/setup.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/uapi/asm/sigcontext.h b/arch/sh/include/uapi/asm/sigcontext.h new file mode 100644 index 00000000000..8ce1435bc0b --- /dev/null +++ b/arch/sh/include/uapi/asm/sigcontext.h @@ -0,0 +1,40 @@ +#ifndef __ASM_SH_SIGCONTEXT_H +#define __ASM_SH_SIGCONTEXT_H + +struct sigcontext { + unsigned long oldmask; + +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) + /* CPU registers */ + unsigned long long sc_regs[63]; + unsigned long long sc_tregs[8]; + unsigned long long sc_pc; + unsigned long long sc_sr; + + /* FPU registers */ + unsigned long long sc_fpregs[32]; + unsigned int sc_fpscr; + unsigned int sc_fpvalid; +#else + /* CPU registers */ + unsigned long sc_regs[16]; + unsigned long sc_pc; + unsigned long sc_pr; + unsigned long sc_sr; + unsigned long sc_gbr; + unsigned long sc_mach; + unsigned long sc_macl; + +#if defined(__SH4__) || defined(CONFIG_CPU_SH4) || \ + defined(__SH2A__) || defined(CONFIG_CPU_SH2A) + /* FPU registers */ + unsigned long sc_fpregs[16]; + unsigned long sc_xfpregs[16]; + unsigned int sc_fpscr; + unsigned int sc_fpul; + unsigned int sc_ownedfp; +#endif +#endif +}; + +#endif /* __ASM_SH_SIGCONTEXT_H */ diff --git a/arch/sh/include/uapi/asm/signal.h b/arch/sh/include/uapi/asm/signal.h new file mode 100644 index 00000000000..9ac530a90bc --- /dev/null +++ b/arch/sh/include/uapi/asm/signal.h @@ -0,0 +1,15 @@ +#ifndef __ASM_SH_SIGNAL_H +#define __ASM_SH_SIGNAL_H + +#define SA_RESTORER 0x04000000 + +#include + +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#endif /* __ASM_SH_SIGNAL_H */ diff --git a/arch/sh/include/uapi/asm/sockios.h b/arch/sh/include/uapi/asm/sockios.h new file mode 100644 index 00000000000..cf8b96b1f9a --- /dev/null +++ b/arch/sh/include/uapi/asm/sockios.h @@ -0,0 +1,14 @@ +#ifndef __ASM_SH_SOCKIOS_H +#define __ASM_SH_SOCKIOS_H + +/* Socket-level I/O control calls. */ +#define FIOGETOWN _IOR('f', 123, int) +#define FIOSETOWN _IOW('f', 124, int) + +#define SIOCATMARK _IOR('s', 7, int) +#define SIOCSPGRP _IOW('s', 8, pid_t) +#define SIOCGPGRP _IOR('s', 9, pid_t) + +#define SIOCGSTAMP _IOR('s', 100, struct timeval) /* Get stamp (timeval) */ +#define SIOCGSTAMPNS _IOR('s', 101, struct timespec) /* Get stamp (timespec) */ +#endif /* __ASM_SH_SOCKIOS_H */ diff --git a/arch/sh/include/uapi/asm/stat.h b/arch/sh/include/uapi/asm/stat.h new file mode 100644 index 00000000000..e1810cc6e3d --- /dev/null +++ b/arch/sh/include/uapi/asm/stat.h @@ -0,0 +1,138 @@ +#ifndef __ASM_SH_STAT_H +#define __ASM_SH_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned short st_dev; + unsigned char __pad0[10]; + + unsigned long st_ino; + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned short st_rdev; + unsigned char __pad3[10]; + + long long st_size; + unsigned long st_blksize; + + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __pad4; /* future possible st_blocks high bits */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ + + unsigned long __unused1; + unsigned long __unused2; +}; +#else +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned long st_rdev; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad0[4]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[4]; + + long long st_size; + unsigned long st_blksize; + + unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#define STAT_HAVE_NSEC 1 +#endif + +#endif /* __ASM_SH_STAT_H */ diff --git a/arch/sh/include/uapi/asm/swab.h b/arch/sh/include/uapi/asm/swab.h new file mode 100644 index 00000000000..1cd09767a7a --- /dev/null +++ b/arch/sh/include/uapi/asm/swab.h @@ -0,0 +1,59 @@ +#ifndef __ASM_SH_SWAB_H +#define __ASM_SH_SWAB_H + +/* + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2000, 2001 Paolo Alberelli + */ +#include +#include +#include + +static inline __attribute_const__ __u32 __arch_swab32(__u32 x) +{ + __asm__( +#ifdef __SH5__ + "byterev %1, %0\n\t" + "shari %0, 32, %0" +#else + "swap.b %1, %0\n\t" + "swap.w %0, %0\n\t" + "swap.b %0, %0" +#endif + : "=r" (x) + : "r" (x)); + + return x; +} +#define __arch_swab32 __arch_swab32 + +static inline __attribute_const__ __u16 __arch_swab16(__u16 x) +{ + __asm__( +#ifdef __SH5__ + "byterev %1, %0\n\t" + "shari %0, 32, %0" +#else + "swap.b %1, %0" +#endif + : "=r" (x) + : "r" (x)); + + return x; +} +#define __arch_swab16 __arch_swab16 + +static inline __u64 __arch_swab64(__u64 val) +{ + union { + struct { __u32 a,b; } s; + __u64 u; + } v, w; + v.u = val; + w.s.b = __arch_swab32(v.s.a); + w.s.a = __arch_swab32(v.s.b); + return w.u; +} +#define __arch_swab64 __arch_swab64 + +#endif /* __ASM_SH_SWAB_H */ diff --git a/arch/sh/include/uapi/asm/types.h b/arch/sh/include/uapi/asm/types.h new file mode 100644 index 00000000000..b9e79bc580d --- /dev/null +++ b/arch/sh/include/uapi/asm/types.h @@ -0,0 +1 @@ +#include diff --git a/arch/sh/include/uapi/asm/unistd.h b/arch/sh/include/uapi/asm/unistd.h new file mode 100644 index 00000000000..eeef88dd53c --- /dev/null +++ b/arch/sh/include/uapi/asm/unistd.h @@ -0,0 +1,7 @@ +#ifndef __KERNEL__ +# ifdef __SH5__ +# include +# else +# include +# endif +#endif diff --git a/arch/sh/include/uapi/asm/unistd_32.h b/arch/sh/include/uapi/asm/unistd_32.h new file mode 100644 index 00000000000..72fd1e06100 --- /dev/null +++ b/arch/sh/include/uapi/asm/unistd_32.h @@ -0,0 +1,384 @@ +#ifndef __ASM_SH_UNISTD_32_H +#define __ASM_SH_UNISTD_32_H + +/* + * Copyright (C) 1999 Niibe Yutaka + */ + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 + /* 17 was sys_break */ +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 + /* 31 was sys_stty */ + /* 32 was sys_gtty */ +#define __NR_access 33 +#define __NR_nice 34 + /* 35 was sys_ftime */ +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 + /* 44 was sys_prof */ +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 + /* 53 was sys_lock */ +#define __NR_ioctl 54 +#define __NR_fcntl 55 + /* 56 was sys_mpx */ +#define __NR_setpgid 57 + /* 58 was sys_ulimit */ + /* 59 was sys_olduname */ +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 + /* 82 was sys_oldselect */ +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 + /* 98 was sys_profil */ +#define __NR_statfs 99 +#define __NR_fstatfs 100 + /* 101 was sys_ioperm */ +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 + /* 110 was sys_iopl */ +#define __NR_vhangup 111 + /* 112 was sys_idle */ + /* 113 was sys_vm86old */ +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_cacheflush 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 + /* 127 was sys_create_module */ +#define __NR_init_module 128 +#define __NR_delete_module 129 + /* 130 was sys_get_kernel_syms */ +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 + /* 137 was sys_afs_syscall */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 + /* 166 was sys_vm86 */ + /* 167 was sys_query_module */ +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 + /* 188 reserved for sys_getpmsg */ + /* 189 reserved for sys_putpmsg */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 +#define __NR_getdents64 220 +#define __NR_fcntl64 221 + /* 222 is reserved for tux */ + /* 223 is unused */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 + /* 243 is reserved for set_thread_area */ + /* 244 is reserved for get_thread_area */ +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 +#define __NR_fadvise64 250 + /* 251 is unused */ +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_epoll_create 254 +#define __NR_epoll_ctl 255 +#define __NR_epoll_wait 256 +#define __NR_remap_file_pages 257 +#define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 268 +#define __NR_fstatfs64 269 +#define __NR_tgkill 270 +#define __NR_utimes 271 +#define __NR_fadvise64_64 272 + /* 273 is reserved for vserver */ +#define __NR_mbind 274 +#define __NR_get_mempolicy 275 +#define __NR_set_mempolicy 276 +#define __NR_mq_open 277 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 283 +#define __NR_waitid 284 +#define __NR_add_key 285 +#define __NR_request_key 286 +#define __NR_keyctl 287 +#define __NR_ioprio_set 288 +#define __NR_ioprio_get 289 +#define __NR_inotify_init 290 +#define __NR_inotify_add_watch 291 +#define __NR_inotify_rm_watch 292 + /* 293 is unused */ +#define __NR_migrate_pages 294 +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 +#define __NR_set_robust_list 311 +#define __NR_get_robust_list 312 +#define __NR_splice 313 +#define __NR_sync_file_range 314 +#define __NR_tee 315 +#define __NR_vmsplice 316 +#define __NR_move_pages 317 +#define __NR_getcpu 318 +#define __NR_epoll_pwait 319 +#define __NR_utimensat 320 +#define __NR_signalfd 321 +#define __NR_timerfd_create 322 +#define __NR_eventfd 323 +#define __NR_fallocate 324 +#define __NR_timerfd_settime 325 +#define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 +#define __NR_preadv 333 +#define __NR_pwritev 334 +#define __NR_rt_tgsigqueueinfo 335 +#define __NR_perf_event_open 336 +#define __NR_fanotify_init 337 +#define __NR_fanotify_mark 338 +#define __NR_prlimit64 339 + +/* Non-multiplexed socket family */ +#define __NR_socket 340 +#define __NR_bind 341 +#define __NR_connect 342 +#define __NR_listen 343 +#define __NR_accept 344 +#define __NR_getsockname 345 +#define __NR_getpeername 346 +#define __NR_socketpair 347 +#define __NR_send 348 +#define __NR_sendto 349 +#define __NR_recv 350 +#define __NR_recvfrom 351 +#define __NR_shutdown 352 +#define __NR_setsockopt 353 +#define __NR_getsockopt 354 +#define __NR_sendmsg 355 +#define __NR_recvmsg 356 +#define __NR_recvmmsg 357 +#define __NR_accept4 358 +#define __NR_name_to_handle_at 359 +#define __NR_open_by_handle_at 360 +#define __NR_clock_adjtime 361 +#define __NR_syncfs 362 +#define __NR_sendmmsg 363 +#define __NR_setns 364 +#define __NR_process_vm_readv 365 +#define __NR_process_vm_writev 366 + +#define NR_syscalls 367 + +#endif /* __ASM_SH_UNISTD_32_H */ diff --git a/arch/sh/include/uapi/asm/unistd_64.h b/arch/sh/include/uapi/asm/unistd_64.h new file mode 100644 index 00000000000..a28edc32969 --- /dev/null +++ b/arch/sh/include/uapi/asm/unistd_64.h @@ -0,0 +1,404 @@ +#ifndef __ASM_SH_UNISTD_64_H +#define __ASM_SH_UNISTD_64_H + +/* + * include/asm-sh/unistd_64.h + * + * This file contains the system call numbers. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 - 2007 Paul Mundt + * Copyright (C) 2004 Sean McGoogan + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 + /* 17 was sys_break */ +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 + /* 31 was sys_stty */ + /* 32 was sys_gtty */ +#define __NR_access 33 +#define __NR_nice 34 + /* 35 was sys_ftime */ +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 + /* 44 was sys_prof */ +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 + /* 53 was sys_lock */ +#define __NR_ioctl 54 +#define __NR_fcntl 55 + /* 56 was sys_mpx */ +#define __NR_setpgid 57 + /* 58 was sys_ulimit */ + /* 59 was sys_olduname */ +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 + /* 82 was sys_select */ +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 + /* 98 was sys_profil */ +#define __NR_statfs 99 +#define __NR_fstatfs 100 + /* 101 was sys_ioperm */ +#define __NR_socketcall 102 /* old implementation of socket systemcall */ +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 + /* 110 was sys_iopl */ +#define __NR_vhangup 111 + /* 112 was sys_idle */ + /* 113 was sys_vm86old */ +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_cacheflush 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 + /* 127 was sys_create_module */ +#define __NR_init_module 128 +#define __NR_delete_module 129 + /* 130 was sys_get_kernel_syms */ +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 + /* 137 was sys_afs_syscall */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 + /* 166 was sys_vm86 */ + /* 167 was sys_query_module */ +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 + /* 188 reserved for getpmsg */ + /* 189 reserved for putpmsg */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 + +/* Non-multiplexed socket family */ +#define __NR_socket 220 +#define __NR_bind 221 +#define __NR_connect 222 +#define __NR_listen 223 +#define __NR_accept 224 +#define __NR_getsockname 225 +#define __NR_getpeername 226 +#define __NR_socketpair 227 +#define __NR_send 228 +#define __NR_sendto 229 +#define __NR_recv 230 +#define __NR_recvfrom 231 +#define __NR_shutdown 232 +#define __NR_setsockopt 233 +#define __NR_getsockopt 234 +#define __NR_sendmsg 235 +#define __NR_recvmsg 236 + +/* Non-multiplexed IPC family */ +#define __NR_semop 237 +#define __NR_semget 238 +#define __NR_semctl 239 +#define __NR_msgsnd 240 +#define __NR_msgrcv 241 +#define __NR_msgget 242 +#define __NR_msgctl 243 +#define __NR_shmat 244 +#define __NR_shmdt 245 +#define __NR_shmget 246 +#define __NR_shmctl 247 + +#define __NR_getdents64 248 +#define __NR_fcntl64 249 + /* 250 is reserved for tux */ + /* 251 is unused */ +#define __NR_gettid 252 +#define __NR_readahead 253 +#define __NR_setxattr 254 +#define __NR_lsetxattr 255 +#define __NR_fsetxattr 256 +#define __NR_getxattr 257 +#define __NR_lgetxattr 258 +#define __NR_fgetxattr 269 +#define __NR_listxattr 260 +#define __NR_llistxattr 261 +#define __NR_flistxattr 262 +#define __NR_removexattr 263 +#define __NR_lremovexattr 264 +#define __NR_fremovexattr 265 +#define __NR_tkill 266 +#define __NR_sendfile64 267 +#define __NR_futex 268 +#define __NR_sched_setaffinity 269 +#define __NR_sched_getaffinity 270 + /* 271 is reserved for set_thread_area */ + /* 272 is reserved for get_thread_area */ +#define __NR_io_setup 273 +#define __NR_io_destroy 274 +#define __NR_io_getevents 275 +#define __NR_io_submit 276 +#define __NR_io_cancel 277 +#define __NR_fadvise64 278 + /* 279 is unused */ +#define __NR_exit_group 280 + +#define __NR_lookup_dcookie 281 +#define __NR_epoll_create 282 +#define __NR_epoll_ctl 283 +#define __NR_epoll_wait 284 +#define __NR_remap_file_pages 285 +#define __NR_set_tid_address 286 +#define __NR_timer_create 287 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 296 +#define __NR_fstatfs64 297 +#define __NR_tgkill 298 +#define __NR_utimes 299 +#define __NR_fadvise64_64 300 + /* 301 is reserved for vserver */ + /* 302 is reserved for mbind */ + /* 303 is reserved for get_mempolicy */ + /* 304 is reserved for set_mempolicy */ +#define __NR_mq_open 305 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) + /* 311 is reserved for kexec */ +#define __NR_waitid 312 +#define __NR_add_key 313 +#define __NR_request_key 314 +#define __NR_keyctl 315 +#define __NR_ioprio_set 316 +#define __NR_ioprio_get 317 +#define __NR_inotify_init 318 +#define __NR_inotify_add_watch 319 +#define __NR_inotify_rm_watch 320 + /* 321 is unused */ +#define __NR_migrate_pages 322 +#define __NR_openat 323 +#define __NR_mkdirat 324 +#define __NR_mknodat 325 +#define __NR_fchownat 326 +#define __NR_futimesat 327 +#define __NR_fstatat64 328 +#define __NR_unlinkat 329 +#define __NR_renameat 330 +#define __NR_linkat 331 +#define __NR_symlinkat 332 +#define __NR_readlinkat 333 +#define __NR_fchmodat 334 +#define __NR_faccessat 335 +#define __NR_pselect6 336 +#define __NR_ppoll 337 +#define __NR_unshare 338 +#define __NR_set_robust_list 339 +#define __NR_get_robust_list 340 +#define __NR_splice 341 +#define __NR_sync_file_range 342 +#define __NR_tee 343 +#define __NR_vmsplice 344 +#define __NR_move_pages 345 +#define __NR_getcpu 346 +#define __NR_epoll_pwait 347 +#define __NR_utimensat 348 +#define __NR_signalfd 349 +#define __NR_timerfd_create 350 +#define __NR_eventfd 351 +#define __NR_fallocate 352 +#define __NR_timerfd_settime 353 +#define __NR_timerfd_gettime 354 +#define __NR_signalfd4 355 +#define __NR_eventfd2 356 +#define __NR_epoll_create1 357 +#define __NR_dup3 358 +#define __NR_pipe2 359 +#define __NR_inotify_init1 360 +#define __NR_preadv 361 +#define __NR_pwritev 362 +#define __NR_rt_tgsigqueueinfo 363 +#define __NR_perf_event_open 364 +#define __NR_recvmmsg 365 +#define __NR_accept4 366 +#define __NR_fanotify_init 367 +#define __NR_fanotify_mark 368 +#define __NR_prlimit64 369 +#define __NR_name_to_handle_at 370 +#define __NR_open_by_handle_at 371 +#define __NR_clock_adjtime 372 +#define __NR_syncfs 373 +#define __NR_sendmmsg 374 +#define __NR_setns 375 +#define __NR_process_vm_readv 376 +#define __NR_process_vm_writev 377 + +#define NR_syscalls 378 + +#endif /* __ASM_SH_UNISTD_64_H */ -- cgit v1.2.3-70-g09d2 From 5217c129443600b414e5b64aafe358952b78a65d Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Oct 2012 09:48:44 +0100 Subject: UAPI: (Scripted) Disintegrate include/linux/hsi Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones --- include/linux/hsi/Kbuild | 1 - include/linux/hsi/hsi_char.h | 63 --------------------------------------- include/uapi/linux/hsi/Kbuild | 1 + include/uapi/linux/hsi/hsi_char.h | 63 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 64 insertions(+), 64 deletions(-) delete mode 100644 include/linux/hsi/hsi_char.h create mode 100644 include/uapi/linux/hsi/hsi_char.h diff --git a/include/linux/hsi/Kbuild b/include/linux/hsi/Kbuild index 271a770b478..e69de29bb2d 100644 --- a/include/linux/hsi/Kbuild +++ b/include/linux/hsi/Kbuild @@ -1 +0,0 @@ -header-y += hsi_char.h diff --git a/include/linux/hsi/hsi_char.h b/include/linux/hsi/hsi_char.h deleted file mode 100644 index 76160b4f455..00000000000 --- a/include/linux/hsi/hsi_char.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Part of the HSI character device driver. - * - * Copyright (C) 2010 Nokia Corporation. All rights reserved. - * - * Contact: Andras Domokos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - - -#ifndef __HSI_CHAR_H -#define __HSI_CHAR_H - -#define HSI_CHAR_MAGIC 'k' -#define HSC_IOW(num, dtype) _IOW(HSI_CHAR_MAGIC, num, dtype) -#define HSC_IOR(num, dtype) _IOR(HSI_CHAR_MAGIC, num, dtype) -#define HSC_IOWR(num, dtype) _IOWR(HSI_CHAR_MAGIC, num, dtype) -#define HSC_IO(num) _IO(HSI_CHAR_MAGIC, num) - -#define HSC_RESET HSC_IO(16) -#define HSC_SET_PM HSC_IO(17) -#define HSC_SEND_BREAK HSC_IO(18) -#define HSC_SET_RX HSC_IOW(19, struct hsc_rx_config) -#define HSC_GET_RX HSC_IOW(20, struct hsc_rx_config) -#define HSC_SET_TX HSC_IOW(21, struct hsc_tx_config) -#define HSC_GET_TX HSC_IOW(22, struct hsc_tx_config) - -#define HSC_PM_DISABLE 0 -#define HSC_PM_ENABLE 1 - -#define HSC_MODE_STREAM 1 -#define HSC_MODE_FRAME 2 -#define HSC_FLOW_SYNC 0 -#define HSC_ARB_RR 0 -#define HSC_ARB_PRIO 1 - -struct hsc_rx_config { - uint32_t mode; - uint32_t flow; - uint32_t channels; -}; - -struct hsc_tx_config { - uint32_t mode; - uint32_t channels; - uint32_t speed; - uint32_t arb_mode; -}; - -#endif /* __HSI_CHAR_H */ diff --git a/include/uapi/linux/hsi/Kbuild b/include/uapi/linux/hsi/Kbuild index aafaa5aa54d..30ab3cd3b8a 100644 --- a/include/uapi/linux/hsi/Kbuild +++ b/include/uapi/linux/hsi/Kbuild @@ -1 +1,2 @@ # UAPI Header export list +header-y += hsi_char.h diff --git a/include/uapi/linux/hsi/hsi_char.h b/include/uapi/linux/hsi/hsi_char.h new file mode 100644 index 00000000000..76160b4f455 --- /dev/null +++ b/include/uapi/linux/hsi/hsi_char.h @@ -0,0 +1,63 @@ +/* + * Part of the HSI character device driver. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Andras Domokos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + + +#ifndef __HSI_CHAR_H +#define __HSI_CHAR_H + +#define HSI_CHAR_MAGIC 'k' +#define HSC_IOW(num, dtype) _IOW(HSI_CHAR_MAGIC, num, dtype) +#define HSC_IOR(num, dtype) _IOR(HSI_CHAR_MAGIC, num, dtype) +#define HSC_IOWR(num, dtype) _IOWR(HSI_CHAR_MAGIC, num, dtype) +#define HSC_IO(num) _IO(HSI_CHAR_MAGIC, num) + +#define HSC_RESET HSC_IO(16) +#define HSC_SET_PM HSC_IO(17) +#define HSC_SEND_BREAK HSC_IO(18) +#define HSC_SET_RX HSC_IOW(19, struct hsc_rx_config) +#define HSC_GET_RX HSC_IOW(20, struct hsc_rx_config) +#define HSC_SET_TX HSC_IOW(21, struct hsc_tx_config) +#define HSC_GET_TX HSC_IOW(22, struct hsc_tx_config) + +#define HSC_PM_DISABLE 0 +#define HSC_PM_ENABLE 1 + +#define HSC_MODE_STREAM 1 +#define HSC_MODE_FRAME 2 +#define HSC_FLOW_SYNC 0 +#define HSC_ARB_RR 0 +#define HSC_ARB_PRIO 1 + +struct hsc_rx_config { + uint32_t mode; + uint32_t flow; + uint32_t channels; +}; + +struct hsc_tx_config { + uint32_t mode; + uint32_t channels; + uint32_t speed; + uint32_t arb_mode; +}; + +#endif /* __HSI_CHAR_H */ -- cgit v1.2.3-70-g09d2 From 5e1ddb481776a487b15b40579a000b279ce527c9 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Oct 2012 09:49:07 +0100 Subject: UAPI: (Scripted) Disintegrate include/linux/usb Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones --- include/linux/usb/Kbuild | 10 - include/linux/usb/audio.h | 524 +------------------ include/linux/usb/cdc.h | 412 --------------- include/linux/usb/ch11.h | 266 ---------- include/linux/usb/ch9.h | 960 +--------------------------------- include/linux/usb/functionfs.h | 167 +----- include/linux/usb/g_printer.h | 35 -- include/linux/usb/gadgetfs.h | 88 ---- include/linux/usb/midi.h | 112 ---- include/linux/usb/tmc.h | 43 -- include/linux/usb/video.h | 568 --------------------- include/uapi/linux/usb/Kbuild | 10 + include/uapi/linux/usb/audio.h | 545 ++++++++++++++++++++ include/uapi/linux/usb/cdc.h | 412 +++++++++++++++ include/uapi/linux/usb/ch11.h | 266 ++++++++++ include/uapi/linux/usb/ch9.h | 993 ++++++++++++++++++++++++++++++++++++ include/uapi/linux/usb/functionfs.h | 169 ++++++ include/uapi/linux/usb/g_printer.h | 35 ++ include/uapi/linux/usb/gadgetfs.h | 88 ++++ include/uapi/linux/usb/midi.h | 112 ++++ include/uapi/linux/usb/tmc.h | 43 ++ include/uapi/linux/usb/video.h | 568 +++++++++++++++++++++ 22 files changed, 3244 insertions(+), 3182 deletions(-) delete mode 100644 include/linux/usb/cdc.h delete mode 100644 include/linux/usb/ch11.h delete mode 100644 include/linux/usb/g_printer.h delete mode 100644 include/linux/usb/gadgetfs.h delete mode 100644 include/linux/usb/midi.h delete mode 100644 include/linux/usb/tmc.h delete mode 100644 include/linux/usb/video.h create mode 100644 include/uapi/linux/usb/audio.h create mode 100644 include/uapi/linux/usb/cdc.h create mode 100644 include/uapi/linux/usb/ch11.h create mode 100644 include/uapi/linux/usb/ch9.h create mode 100644 include/uapi/linux/usb/functionfs.h create mode 100644 include/uapi/linux/usb/g_printer.h create mode 100644 include/uapi/linux/usb/gadgetfs.h create mode 100644 include/uapi/linux/usb/midi.h create mode 100644 include/uapi/linux/usb/tmc.h create mode 100644 include/uapi/linux/usb/video.h diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild index b607f3532e8..e69de29bb2d 100644 --- a/include/linux/usb/Kbuild +++ b/include/linux/usb/Kbuild @@ -1,10 +0,0 @@ -header-y += audio.h -header-y += cdc.h -header-y += ch9.h -header-y += ch11.h -header-y += functionfs.h -header-y += gadgetfs.h -header-y += midi.h -header-y += g_printer.h -header-y += tmc.h -header-y += video.h diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index a54b8255d75..3d84619110a 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -17,531 +17,11 @@ * Types and defines in this file are either specific to version 1.0 of * this standard or common for newer versions. */ - #ifndef __LINUX_USB_AUDIO_H #define __LINUX_USB_AUDIO_H -#include - -/* bInterfaceProtocol values to denote the version of the standard used */ -#define UAC_VERSION_1 0x00 -#define UAC_VERSION_2 0x20 - -/* A.2 Audio Interface Subclass Codes */ -#define USB_SUBCLASS_AUDIOCONTROL 0x01 -#define USB_SUBCLASS_AUDIOSTREAMING 0x02 -#define USB_SUBCLASS_MIDISTREAMING 0x03 - -/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */ -#define UAC_HEADER 0x01 -#define UAC_INPUT_TERMINAL 0x02 -#define UAC_OUTPUT_TERMINAL 0x03 -#define UAC_MIXER_UNIT 0x04 -#define UAC_SELECTOR_UNIT 0x05 -#define UAC_FEATURE_UNIT 0x06 -#define UAC1_PROCESSING_UNIT 0x07 -#define UAC1_EXTENSION_UNIT 0x08 - -/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */ -#define UAC_AS_GENERAL 0x01 -#define UAC_FORMAT_TYPE 0x02 -#define UAC_FORMAT_SPECIFIC 0x03 - -/* A.7 Processing Unit Process Types */ -#define UAC_PROCESS_UNDEFINED 0x00 -#define UAC_PROCESS_UP_DOWNMIX 0x01 -#define UAC_PROCESS_DOLBY_PROLOGIC 0x02 -#define UAC_PROCESS_STEREO_EXTENDER 0x03 -#define UAC_PROCESS_REVERB 0x04 -#define UAC_PROCESS_CHORUS 0x05 -#define UAC_PROCESS_DYN_RANGE_COMP 0x06 - -/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */ -#define UAC_EP_GENERAL 0x01 - -/* A.9 Audio Class-Specific Request Codes */ -#define UAC_SET_ 0x00 -#define UAC_GET_ 0x80 - -#define UAC__CUR 0x1 -#define UAC__MIN 0x2 -#define UAC__MAX 0x3 -#define UAC__RES 0x4 -#define UAC__MEM 0x5 - -#define UAC_SET_CUR (UAC_SET_ | UAC__CUR) -#define UAC_GET_CUR (UAC_GET_ | UAC__CUR) -#define UAC_SET_MIN (UAC_SET_ | UAC__MIN) -#define UAC_GET_MIN (UAC_GET_ | UAC__MIN) -#define UAC_SET_MAX (UAC_SET_ | UAC__MAX) -#define UAC_GET_MAX (UAC_GET_ | UAC__MAX) -#define UAC_SET_RES (UAC_SET_ | UAC__RES) -#define UAC_GET_RES (UAC_GET_ | UAC__RES) -#define UAC_SET_MEM (UAC_SET_ | UAC__MEM) -#define UAC_GET_MEM (UAC_GET_ | UAC__MEM) - -#define UAC_GET_STAT 0xff - -/* A.10 Control Selector Codes */ - -/* A.10.1 Terminal Control Selectors */ -#define UAC_TERM_COPY_PROTECT 0x01 - -/* A.10.2 Feature Unit Control Selectors */ -#define UAC_FU_MUTE 0x01 -#define UAC_FU_VOLUME 0x02 -#define UAC_FU_BASS 0x03 -#define UAC_FU_MID 0x04 -#define UAC_FU_TREBLE 0x05 -#define UAC_FU_GRAPHIC_EQUALIZER 0x06 -#define UAC_FU_AUTOMATIC_GAIN 0x07 -#define UAC_FU_DELAY 0x08 -#define UAC_FU_BASS_BOOST 0x09 -#define UAC_FU_LOUDNESS 0x0a - -#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1)) - -/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */ -#define UAC_UD_ENABLE 0x01 -#define UAC_UD_MODE_SELECT 0x02 - -/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */ -#define UAC_DP_ENABLE 0x01 -#define UAC_DP_MODE_SELECT 0x02 - -/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */ -#define UAC_3D_ENABLE 0x01 -#define UAC_3D_SPACE 0x02 - -/* A.10.3.4 Reverberation Processing Unit Control Selectors */ -#define UAC_REVERB_ENABLE 0x01 -#define UAC_REVERB_LEVEL 0x02 -#define UAC_REVERB_TIME 0x03 -#define UAC_REVERB_FEEDBACK 0x04 - -/* A.10.3.5 Chorus Processing Unit Control Selectors */ -#define UAC_CHORUS_ENABLE 0x01 -#define UAC_CHORUS_LEVEL 0x02 -#define UAC_CHORUS_RATE 0x03 -#define UAC_CHORUS_DEPTH 0x04 - -/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */ -#define UAC_DCR_ENABLE 0x01 -#define UAC_DCR_RATE 0x02 -#define UAC_DCR_MAXAMPL 0x03 -#define UAC_DCR_THRESHOLD 0x04 -#define UAC_DCR_ATTACK_TIME 0x05 -#define UAC_DCR_RELEASE_TIME 0x06 - -/* A.10.4 Extension Unit Control Selectors */ -#define UAC_XU_ENABLE 0x01 - -/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */ -#define UAC_MS_HEADER 0x01 -#define UAC_MIDI_IN_JACK 0x02 -#define UAC_MIDI_OUT_JACK 0x03 - -/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */ -#define UAC_MS_GENERAL 0x01 - -/* Terminals - 2.1 USB Terminal Types */ -#define UAC_TERMINAL_UNDEFINED 0x100 -#define UAC_TERMINAL_STREAMING 0x101 -#define UAC_TERMINAL_VENDOR_SPEC 0x1FF - -/* Terminal Control Selectors */ -/* 4.3.2 Class-Specific AC Interface Descriptor */ -struct uac1_ac_header_descriptor { - __u8 bLength; /* 8 + n */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* UAC_MS_HEADER */ - __le16 bcdADC; /* 0x0100 */ - __le16 wTotalLength; /* includes Unit and Terminal desc. */ - __u8 bInCollection; /* n */ - __u8 baInterfaceNr[]; /* [n] */ -} __attribute__ ((packed)); - -#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \ -struct uac1_ac_header_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __le16 bcdADC; \ - __le16 wTotalLength; \ - __u8 bInCollection; \ - __u8 baInterfaceNr[n]; \ -} __attribute__ ((packed)) - -/* 4.3.2.1 Input Terminal Descriptor */ -struct uac_input_terminal_descriptor { - __u8 bLength; /* in bytes: 12 */ - __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ - __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */ - __u8 bTerminalID; /* Constant uniquely terminal ID */ - __le16 wTerminalType; /* USB Audio Terminal Types */ - __u8 bAssocTerminal; /* ID of the Output Terminal associated */ - __u8 bNrChannels; /* Number of logical output channels */ - __le16 wChannelConfig; - __u8 iChannelNames; - __u8 iTerminal; -} __attribute__ ((packed)); - -#define UAC_DT_INPUT_TERMINAL_SIZE 12 - -/* Terminals - 2.2 Input Terminal Types */ -#define UAC_INPUT_TERMINAL_UNDEFINED 0x200 -#define UAC_INPUT_TERMINAL_MICROPHONE 0x201 -#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202 -#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203 -#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204 -#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 -#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 - -/* Terminals - control selectors */ - -#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01 - -/* 4.3.2.2 Output Terminal Descriptor */ -struct uac1_output_terminal_descriptor { - __u8 bLength; /* in bytes: 9 */ - __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ - __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */ - __u8 bTerminalID; /* Constant uniquely terminal ID */ - __le16 wTerminalType; /* USB Audio Terminal Types */ - __u8 bAssocTerminal; /* ID of the Input Terminal associated */ - __u8 bSourceID; /* ID of the connected Unit or Terminal*/ - __u8 iTerminal; -} __attribute__ ((packed)); - -#define UAC_DT_OUTPUT_TERMINAL_SIZE 9 - -/* Terminals - 2.3 Output Terminal Types */ -#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300 -#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301 -#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302 -#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303 -#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304 -#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305 -#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306 -#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307 - -/* Set bControlSize = 2 as default setting */ -#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \ -struct uac_feature_unit_descriptor_##ch { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bUnitID; \ - __u8 bSourceID; \ - __u8 bControlSize; \ - __le16 bmaControls[ch + 1]; \ - __u8 iFeature; \ -} __attribute__ ((packed)) - -/* 4.3.2.3 Mixer Unit Descriptor */ -struct uac_mixer_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUnitID; - __u8 bNrInPins; - __u8 baSourceID[]; -} __attribute__ ((packed)); +#include -static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc) -{ - return desc->baSourceID[desc->bNrInPins]; -} - -static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc, - int protocol) -{ - if (protocol == UAC_VERSION_1) - return (desc->baSourceID[desc->bNrInPins + 2] << 8) | - desc->baSourceID[desc->bNrInPins + 1]; - else - return (desc->baSourceID[desc->bNrInPins + 4] << 24) | - (desc->baSourceID[desc->bNrInPins + 3] << 16) | - (desc->baSourceID[desc->bNrInPins + 2] << 8) | - (desc->baSourceID[desc->bNrInPins + 1]); -} - -static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - desc->baSourceID[desc->bNrInPins + 3] : - desc->baSourceID[desc->bNrInPins + 5]; -} - -static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - &desc->baSourceID[desc->bNrInPins + 4] : - &desc->baSourceID[desc->bNrInPins + 6]; -} - -static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc) -{ - __u8 *raw = (__u8 *) desc; - return raw[desc->bLength - 1]; -} - -/* 4.3.2.4 Selector Unit Descriptor */ -struct uac_selector_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUintID; - __u8 bNrInPins; - __u8 baSourceID[]; -} __attribute__ ((packed)); - -static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc) -{ - __u8 *raw = (__u8 *) desc; - return raw[desc->bLength - 1]; -} - -/* 4.3.2.5 Feature Unit Descriptor */ -struct uac_feature_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUnitID; - __u8 bSourceID; - __u8 bControlSize; - __u8 bmaControls[0]; /* variable length */ -} __attribute__((packed)); - -static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc) -{ - __u8 *raw = (__u8 *) desc; - return raw[desc->bLength - 1]; -} - -/* 4.3.2.6 Processing Unit Descriptors */ -struct uac_processing_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUnitID; - __u16 wProcessType; - __u8 bNrInPins; - __u8 baSourceID[]; -} __attribute__ ((packed)); - -static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc) -{ - return desc->baSourceID[desc->bNrInPins]; -} - -static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - if (protocol == UAC_VERSION_1) - return (desc->baSourceID[desc->bNrInPins + 2] << 8) | - desc->baSourceID[desc->bNrInPins + 1]; - else - return (desc->baSourceID[desc->bNrInPins + 4] << 24) | - (desc->baSourceID[desc->bNrInPins + 3] << 16) | - (desc->baSourceID[desc->bNrInPins + 2] << 8) | - (desc->baSourceID[desc->bNrInPins + 1]); -} - -static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - desc->baSourceID[desc->bNrInPins + 3] : - desc->baSourceID[desc->bNrInPins + 5]; -} - -static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - desc->baSourceID[desc->bNrInPins + 4] : - desc->baSourceID[desc->bNrInPins + 6]; -} - -static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - &desc->baSourceID[desc->bNrInPins + 5] : - &desc->baSourceID[desc->bNrInPins + 7]; -} - -static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); - return desc->baSourceID[desc->bNrInPins + control_size]; -} - -static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); - return &desc->baSourceID[desc->bNrInPins + control_size + 1]; -} - -/* 4.5.2 Class-Specific AS Interface Descriptor */ -struct uac1_as_header_descriptor { - __u8 bLength; /* in bytes: 7 */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* AS_GENERAL */ - __u8 bTerminalLink; /* Terminal ID of connected Terminal */ - __u8 bDelay; /* Delay introduced by the data path */ - __le16 wFormatTag; /* The Audio Data Format */ -} __attribute__ ((packed)); - -#define UAC_DT_AS_HEADER_SIZE 7 - -/* Formats - A.1.1 Audio Data Format Type I Codes */ -#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0 -#define UAC_FORMAT_TYPE_I_PCM 0x1 -#define UAC_FORMAT_TYPE_I_PCM8 0x2 -#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3 -#define UAC_FORMAT_TYPE_I_ALAW 0x4 -#define UAC_FORMAT_TYPE_I_MULAW 0x5 - -struct uac_format_type_i_continuous_descriptor { - __u8 bLength; /* in bytes: 8 + (ns * 3) */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* FORMAT_TYPE */ - __u8 bFormatType; /* FORMAT_TYPE_1 */ - __u8 bNrChannels; /* physical channels in the stream */ - __u8 bSubframeSize; /* */ - __u8 bBitResolution; - __u8 bSamFreqType; - __u8 tLowerSamFreq[3]; - __u8 tUpperSamFreq[3]; -} __attribute__ ((packed)); - -#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14 - -struct uac_format_type_i_discrete_descriptor { - __u8 bLength; /* in bytes: 8 + (ns * 3) */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* FORMAT_TYPE */ - __u8 bFormatType; /* FORMAT_TYPE_1 */ - __u8 bNrChannels; /* physical channels in the stream */ - __u8 bSubframeSize; /* */ - __u8 bBitResolution; - __u8 bSamFreqType; - __u8 tSamFreq[][3]; -} __attribute__ ((packed)); - -#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \ -struct uac_format_type_i_discrete_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bFormatType; \ - __u8 bNrChannels; \ - __u8 bSubframeSize; \ - __u8 bBitResolution; \ - __u8 bSamFreqType; \ - __u8 tSamFreq[n][3]; \ -} __attribute__ ((packed)) - -#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) - -struct uac_format_type_i_ext_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bFormatType; - __u8 bSubslotSize; - __u8 bBitResolution; - __u8 bHeaderLength; - __u8 bControlSize; - __u8 bSideBandProtocol; -} __attribute__((packed)); - -/* Formats - Audio Data Format Type I Codes */ - -#define UAC_FORMAT_TYPE_II_MPEG 0x1001 -#define UAC_FORMAT_TYPE_II_AC3 0x1002 - -struct uac_format_type_ii_discrete_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bFormatType; - __le16 wMaxBitRate; - __le16 wSamplesPerFrame; - __u8 bSamFreqType; - __u8 tSamFreq[][3]; -} __attribute__((packed)); - -struct uac_format_type_ii_ext_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bFormatType; - __u16 wMaxBitRate; - __u16 wSamplesPerFrame; - __u8 bHeaderLength; - __u8 bSideBandProtocol; -} __attribute__((packed)); - -/* type III */ -#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006 - -/* Formats - A.2 Format Type Codes */ -#define UAC_FORMAT_TYPE_UNDEFINED 0x0 -#define UAC_FORMAT_TYPE_I 0x1 -#define UAC_FORMAT_TYPE_II 0x2 -#define UAC_FORMAT_TYPE_III 0x3 -#define UAC_EXT_FORMAT_TYPE_I 0x81 -#define UAC_EXT_FORMAT_TYPE_II 0x82 -#define UAC_EXT_FORMAT_TYPE_III 0x83 - -struct uac_iso_endpoint_descriptor { - __u8 bLength; /* in bytes: 7 */ - __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ - __u8 bDescriptorSubtype; /* EP_GENERAL */ - __u8 bmAttributes; - __u8 bLockDelayUnits; - __le16 wLockDelay; -} __attribute__((packed)); -#define UAC_ISO_ENDPOINT_DESC_SIZE 7 - -#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01 -#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02 -#define UAC_EP_CS_ATTR_FILL_MAX 0x80 - -/* status word format (3.7.1.1) */ - -#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f -#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF 0x0 -#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF 0x1 -#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP 0x2 - -#define UAC1_STATUS_TYPE_IRQ_PENDING (1 << 7) -#define UAC1_STATUS_TYPE_MEM_CHANGED (1 << 6) - -struct uac1_status_word { - __u8 bStatusType; - __u8 bOriginator; -} __attribute__((packed)); - -#ifdef __KERNEL__ struct usb_audio_control { struct list_head list; @@ -561,6 +41,4 @@ struct usb_audio_control_selector { struct usb_descriptor_header *desc; }; -#endif /* __KERNEL__ */ - #endif /* __LINUX_USB_AUDIO_H */ diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h deleted file mode 100644 index 81a927930bf..00000000000 --- a/include/linux/usb/cdc.h +++ /dev/null @@ -1,412 +0,0 @@ -/* - * USB Communications Device Class (CDC) definitions - * - * CDC says how to talk to lots of different types of network adapters, - * notably ethernet adapters and various modems. It's used mostly with - * firmware based USB peripherals. - */ - -#ifndef __LINUX_USB_CDC_H -#define __LINUX_USB_CDC_H - -#include - -#define USB_CDC_SUBCLASS_ACM 0x02 -#define USB_CDC_SUBCLASS_ETHERNET 0x06 -#define USB_CDC_SUBCLASS_WHCM 0x08 -#define USB_CDC_SUBCLASS_DMM 0x09 -#define USB_CDC_SUBCLASS_MDLM 0x0a -#define USB_CDC_SUBCLASS_OBEX 0x0b -#define USB_CDC_SUBCLASS_EEM 0x0c -#define USB_CDC_SUBCLASS_NCM 0x0d - -#define USB_CDC_PROTO_NONE 0 - -#define USB_CDC_ACM_PROTO_AT_V25TER 1 -#define USB_CDC_ACM_PROTO_AT_PCCA101 2 -#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE 3 -#define USB_CDC_ACM_PROTO_AT_GSM 4 -#define USB_CDC_ACM_PROTO_AT_3G 5 -#define USB_CDC_ACM_PROTO_AT_CDMA 6 -#define USB_CDC_ACM_PROTO_VENDOR 0xff - -#define USB_CDC_PROTO_EEM 7 - -#define USB_CDC_NCM_PROTO_NTB 1 - -/*-------------------------------------------------------------------------*/ - -/* - * Class-Specific descriptors ... there are a couple dozen of them - */ - -#define USB_CDC_HEADER_TYPE 0x00 /* header_desc */ -#define USB_CDC_CALL_MANAGEMENT_TYPE 0x01 /* call_mgmt_descriptor */ -#define USB_CDC_ACM_TYPE 0x02 /* acm_descriptor */ -#define USB_CDC_UNION_TYPE 0x06 /* union_desc */ -#define USB_CDC_COUNTRY_TYPE 0x07 -#define USB_CDC_NETWORK_TERMINAL_TYPE 0x0a /* network_terminal_desc */ -#define USB_CDC_ETHERNET_TYPE 0x0f /* ether_desc */ -#define USB_CDC_WHCM_TYPE 0x11 -#define USB_CDC_MDLM_TYPE 0x12 /* mdlm_desc */ -#define USB_CDC_MDLM_DETAIL_TYPE 0x13 /* mdlm_detail_desc */ -#define USB_CDC_DMM_TYPE 0x14 -#define USB_CDC_OBEX_TYPE 0x15 -#define USB_CDC_NCM_TYPE 0x1a - -/* "Header Functional Descriptor" from CDC spec 5.2.3.1 */ -struct usb_cdc_header_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdCDC; -} __attribute__ ((packed)); - -/* "Call Management Descriptor" from CDC spec 5.2.3.2 */ -struct usb_cdc_call_mgmt_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bmCapabilities; -#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT 0x01 -#define USB_CDC_CALL_MGMT_CAP_DATA_INTF 0x02 - - __u8 bDataInterface; -} __attribute__ ((packed)); - -/* "Abstract Control Management Descriptor" from CDC spec 5.2.3.3 */ -struct usb_cdc_acm_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bmCapabilities; -} __attribute__ ((packed)); - -/* capabilities from 5.2.3.3 */ - -#define USB_CDC_COMM_FEATURE 0x01 -#define USB_CDC_CAP_LINE 0x02 -#define USB_CDC_CAP_BRK 0x04 -#define USB_CDC_CAP_NOTIFY 0x08 - -/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */ -struct usb_cdc_union_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bMasterInterface0; - __u8 bSlaveInterface0; - /* ... and there could be other slave interfaces */ -} __attribute__ ((packed)); - -/* "Country Selection Functional Descriptor" from CDC spec 5.2.3.9 */ -struct usb_cdc_country_functional_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 iCountryCodeRelDate; - __le16 wCountyCode0; - /* ... and there can be a lot of country codes */ -} __attribute__ ((packed)); - -/* "Network Channel Terminal Functional Descriptor" from CDC spec 5.2.3.11 */ -struct usb_cdc_network_terminal_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bEntityId; - __u8 iName; - __u8 bChannelIndex; - __u8 bPhysicalInterface; -} __attribute__ ((packed)); - -/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */ -struct usb_cdc_ether_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 iMACAddress; - __le32 bmEthernetStatistics; - __le16 wMaxSegmentSize; - __le16 wNumberMCFilters; - __u8 bNumberPowerFilters; -} __attribute__ ((packed)); - -/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */ -struct usb_cdc_dmm_desc { - __u8 bFunctionLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u16 bcdVersion; - __le16 wMaxCommand; -} __attribute__ ((packed)); - -/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */ -struct usb_cdc_mdlm_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdVersion; - __u8 bGUID[16]; -} __attribute__ ((packed)); - -/* "MDLM Detail Functional Descriptor" from CDC WMC spec 6.7.2.4 */ -struct usb_cdc_mdlm_detail_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - /* type is associated with mdlm_desc.bGUID */ - __u8 bGuidDescriptorType; - __u8 bDetailData[0]; -} __attribute__ ((packed)); - -/* "OBEX Control Model Functional Descriptor" */ -struct usb_cdc_obex_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdVersion; -} __attribute__ ((packed)); - -/* "NCM Control Model Functional Descriptor" */ -struct usb_cdc_ncm_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdNcmVersion; - __u8 bmNetworkCapabilities; -} __attribute__ ((packed)); -/*-------------------------------------------------------------------------*/ - -/* - * Class-Specific Control Requests (6.2) - * - * section 3.6.2.1 table 4 has the ACM profile, for modems. - * section 3.8.2 table 10 has the ethernet profile. - * - * Microsoft's RNDIS stack for Ethernet is a vendor-specific CDC ACM variant, - * heavily dependent on the encapsulated (proprietary) command mechanism. - */ - -#define USB_CDC_SEND_ENCAPSULATED_COMMAND 0x00 -#define USB_CDC_GET_ENCAPSULATED_RESPONSE 0x01 -#define USB_CDC_REQ_SET_LINE_CODING 0x20 -#define USB_CDC_REQ_GET_LINE_CODING 0x21 -#define USB_CDC_REQ_SET_CONTROL_LINE_STATE 0x22 -#define USB_CDC_REQ_SEND_BREAK 0x23 -#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40 -#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER 0x41 -#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER 0x42 -#define USB_CDC_SET_ETHERNET_PACKET_FILTER 0x43 -#define USB_CDC_GET_ETHERNET_STATISTIC 0x44 -#define USB_CDC_GET_NTB_PARAMETERS 0x80 -#define USB_CDC_GET_NET_ADDRESS 0x81 -#define USB_CDC_SET_NET_ADDRESS 0x82 -#define USB_CDC_GET_NTB_FORMAT 0x83 -#define USB_CDC_SET_NTB_FORMAT 0x84 -#define USB_CDC_GET_NTB_INPUT_SIZE 0x85 -#define USB_CDC_SET_NTB_INPUT_SIZE 0x86 -#define USB_CDC_GET_MAX_DATAGRAM_SIZE 0x87 -#define USB_CDC_SET_MAX_DATAGRAM_SIZE 0x88 -#define USB_CDC_GET_CRC_MODE 0x89 -#define USB_CDC_SET_CRC_MODE 0x8a - -/* Line Coding Structure from CDC spec 6.2.13 */ -struct usb_cdc_line_coding { - __le32 dwDTERate; - __u8 bCharFormat; -#define USB_CDC_1_STOP_BITS 0 -#define USB_CDC_1_5_STOP_BITS 1 -#define USB_CDC_2_STOP_BITS 2 - - __u8 bParityType; -#define USB_CDC_NO_PARITY 0 -#define USB_CDC_ODD_PARITY 1 -#define USB_CDC_EVEN_PARITY 2 -#define USB_CDC_MARK_PARITY 3 -#define USB_CDC_SPACE_PARITY 4 - - __u8 bDataBits; -} __attribute__ ((packed)); - -/* table 62; bits in multicast filter */ -#define USB_CDC_PACKET_TYPE_PROMISCUOUS (1 << 0) -#define USB_CDC_PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */ -#define USB_CDC_PACKET_TYPE_DIRECTED (1 << 2) -#define USB_CDC_PACKET_TYPE_BROADCAST (1 << 3) -#define USB_CDC_PACKET_TYPE_MULTICAST (1 << 4) /* filtered */ - - -/*-------------------------------------------------------------------------*/ - -/* - * Class-Specific Notifications (6.3) sent by interrupt transfers - * - * section 3.8.2 table 11 of the CDC spec lists Ethernet notifications - * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS - * RNDIS also defines its own bit-incompatible notifications - */ - -#define USB_CDC_NOTIFY_NETWORK_CONNECTION 0x00 -#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE 0x01 -#define USB_CDC_NOTIFY_SERIAL_STATE 0x20 -#define USB_CDC_NOTIFY_SPEED_CHANGE 0x2a - -struct usb_cdc_notification { - __u8 bmRequestType; - __u8 bNotificationType; - __le16 wValue; - __le16 wIndex; - __le16 wLength; -} __attribute__ ((packed)); - -struct usb_cdc_speed_change { - __le32 DLBitRRate; /* contains the downlink bit rate (IN pipe) */ - __le32 ULBitRate; /* contains the uplink bit rate (OUT pipe) */ -} __attribute__ ((packed)); - -/*-------------------------------------------------------------------------*/ - -/* - * Class Specific structures and constants - * - * CDC NCM NTB parameters structure, CDC NCM subclass 6.2.1 - * - */ - -struct usb_cdc_ncm_ntb_parameters { - __le16 wLength; - __le16 bmNtbFormatsSupported; - __le32 dwNtbInMaxSize; - __le16 wNdpInDivisor; - __le16 wNdpInPayloadRemainder; - __le16 wNdpInAlignment; - __le16 wPadding1; - __le32 dwNtbOutMaxSize; - __le16 wNdpOutDivisor; - __le16 wNdpOutPayloadRemainder; - __le16 wNdpOutAlignment; - __le16 wNtbOutMaxDatagrams; -} __attribute__ ((packed)); - -/* - * CDC NCM transfer headers, CDC NCM subclass 3.2 - */ - -#define USB_CDC_NCM_NTH16_SIGN 0x484D434E /* NCMH */ -#define USB_CDC_NCM_NTH32_SIGN 0x686D636E /* ncmh */ - -struct usb_cdc_ncm_nth16 { - __le32 dwSignature; - __le16 wHeaderLength; - __le16 wSequence; - __le16 wBlockLength; - __le16 wNdpIndex; -} __attribute__ ((packed)); - -struct usb_cdc_ncm_nth32 { - __le32 dwSignature; - __le16 wHeaderLength; - __le16 wSequence; - __le32 dwBlockLength; - __le32 dwNdpIndex; -} __attribute__ ((packed)); - -/* - * CDC NCM datagram pointers, CDC NCM subclass 3.3 - */ - -#define USB_CDC_NCM_NDP16_CRC_SIGN 0x314D434E /* NCM1 */ -#define USB_CDC_NCM_NDP16_NOCRC_SIGN 0x304D434E /* NCM0 */ -#define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */ -#define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */ - -/* 16-bit NCM Datagram Pointer Entry */ -struct usb_cdc_ncm_dpe16 { - __le16 wDatagramIndex; - __le16 wDatagramLength; -} __attribute__((__packed__)); - -/* 16-bit NCM Datagram Pointer Table */ -struct usb_cdc_ncm_ndp16 { - __le32 dwSignature; - __le16 wLength; - __le16 wNextNdpIndex; - struct usb_cdc_ncm_dpe16 dpe16[0]; -} __attribute__ ((packed)); - -/* 32-bit NCM Datagram Pointer Entry */ -struct usb_cdc_ncm_dpe32 { - __le32 dwDatagramIndex; - __le32 dwDatagramLength; -} __attribute__((__packed__)); - -/* 32-bit NCM Datagram Pointer Table */ -struct usb_cdc_ncm_ndp32 { - __le32 dwSignature; - __le16 wLength; - __le16 wReserved6; - __le32 dwNextNdpIndex; - __le32 dwReserved12; - struct usb_cdc_ncm_dpe32 dpe32[0]; -} __attribute__ ((packed)); - -/* CDC NCM subclass 3.2.1 and 3.2.2 */ -#define USB_CDC_NCM_NDP16_INDEX_MIN 0x000C -#define USB_CDC_NCM_NDP32_INDEX_MIN 0x0010 - -/* CDC NCM subclass 3.3.3 Datagram Formatting */ -#define USB_CDC_NCM_DATAGRAM_FORMAT_CRC 0x30 -#define USB_CDC_NCM_DATAGRAM_FORMAT_NOCRC 0X31 - -/* CDC NCM subclass 4.2 NCM Communications Interface Protocol Code */ -#define USB_CDC_NCM_PROTO_CODE_NO_ENCAP_COMMANDS 0x00 -#define USB_CDC_NCM_PROTO_CODE_EXTERN_PROTO 0xFE - -/* CDC NCM subclass 5.2.1 NCM Functional Descriptor, bmNetworkCapabilities */ -#define USB_CDC_NCM_NCAP_ETH_FILTER (1 << 0) -#define USB_CDC_NCM_NCAP_NET_ADDRESS (1 << 1) -#define USB_CDC_NCM_NCAP_ENCAP_COMMAND (1 << 2) -#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE (1 << 3) -#define USB_CDC_NCM_NCAP_CRC_MODE (1 << 4) -#define USB_CDC_NCM_NCAP_NTB_INPUT_SIZE (1 << 5) - -/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ -#define USB_CDC_NCM_NTB16_SUPPORTED (1 << 0) -#define USB_CDC_NCM_NTB32_SUPPORTED (1 << 1) - -/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ -#define USB_CDC_NCM_NDP_ALIGN_MIN_SIZE 0x04 -#define USB_CDC_NCM_NTB_MAX_LENGTH 0x1C - -/* CDC NCM subclass 6.2.5 SetNtbFormat */ -#define USB_CDC_NCM_NTB16_FORMAT 0x00 -#define USB_CDC_NCM_NTB32_FORMAT 0x01 - -/* CDC NCM subclass 6.2.7 SetNtbInputSize */ -#define USB_CDC_NCM_NTB_MIN_IN_SIZE 2048 -#define USB_CDC_NCM_NTB_MIN_OUT_SIZE 2048 - -/* NTB Input Size Structure */ -struct usb_cdc_ncm_ndp_input_size { - __le32 dwNtbInMaxSize; - __le16 wNtbInMaxDatagrams; - __le16 wReserved; -} __attribute__ ((packed)); - -/* CDC NCM subclass 6.2.11 SetCrcMode */ -#define USB_CDC_NCM_CRC_NOT_APPENDED 0x00 -#define USB_CDC_NCM_CRC_APPENDED 0x01 - -#endif /* __LINUX_USB_CDC_H */ diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h deleted file mode 100644 index 7692dc69ccf..00000000000 --- a/include/linux/usb/ch11.h +++ /dev/null @@ -1,266 +0,0 @@ -/* - * This file holds Hub protocol constants and data structures that are - * defined in chapter 11 (Hub Specification) of the USB 2.0 specification. - * - * It is used/shared between the USB core, the HCDs and couple of other USB - * drivers. - */ - -#ifndef __LINUX_CH11_H -#define __LINUX_CH11_H - -#include /* __u8 etc */ - -/* - * Hub request types - */ - -#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) -#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) - -/* - * Hub class requests - * See USB 2.0 spec Table 11-16 - */ -#define HUB_CLEAR_TT_BUFFER 8 -#define HUB_RESET_TT 9 -#define HUB_GET_TT_STATE 10 -#define HUB_STOP_TT 11 - -/* - * Hub class additional requests defined by USB 3.0 spec - * See USB 3.0 spec Table 10-6 - */ -#define HUB_SET_DEPTH 12 -#define HUB_GET_PORT_ERR_COUNT 13 - -/* - * Hub Class feature numbers - * See USB 2.0 spec Table 11-17 - */ -#define C_HUB_LOCAL_POWER 0 -#define C_HUB_OVER_CURRENT 1 - -/* - * Port feature numbers - * See USB 2.0 spec Table 11-17 - */ -#define USB_PORT_FEAT_CONNECTION 0 -#define USB_PORT_FEAT_ENABLE 1 -#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */ -#define USB_PORT_FEAT_OVER_CURRENT 3 -#define USB_PORT_FEAT_RESET 4 -#define USB_PORT_FEAT_L1 5 /* L1 suspend */ -#define USB_PORT_FEAT_POWER 8 -#define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */ -#define USB_PORT_FEAT_C_CONNECTION 16 -#define USB_PORT_FEAT_C_ENABLE 17 -#define USB_PORT_FEAT_C_SUSPEND 18 -#define USB_PORT_FEAT_C_OVER_CURRENT 19 -#define USB_PORT_FEAT_C_RESET 20 -#define USB_PORT_FEAT_TEST 21 -#define USB_PORT_FEAT_INDICATOR 22 -#define USB_PORT_FEAT_C_PORT_L1 23 - -/* - * Port feature selectors added by USB 3.0 spec. - * See USB 3.0 spec Table 10-7 - */ -#define USB_PORT_FEAT_LINK_STATE 5 -#define USB_PORT_FEAT_U1_TIMEOUT 23 -#define USB_PORT_FEAT_U2_TIMEOUT 24 -#define USB_PORT_FEAT_C_PORT_LINK_STATE 25 -#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 -#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 -#define USB_PORT_FEAT_BH_PORT_RESET 28 -#define USB_PORT_FEAT_C_BH_PORT_RESET 29 -#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 - -#define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8) - -/* USB 3.0 hub remote wake mask bits, see table 10-14 */ -#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) -#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) -#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10) - -/* - * Hub Status and Hub Change results - * See USB 2.0 spec Table 11-19 and Table 11-20 - */ -struct usb_port_status { - __le16 wPortStatus; - __le16 wPortChange; -} __attribute__ ((packed)); - -/* - * wPortStatus bit field - * See USB 2.0 spec Table 11-21 - */ -#define USB_PORT_STAT_CONNECTION 0x0001 -#define USB_PORT_STAT_ENABLE 0x0002 -#define USB_PORT_STAT_SUSPEND 0x0004 -#define USB_PORT_STAT_OVERCURRENT 0x0008 -#define USB_PORT_STAT_RESET 0x0010 -#define USB_PORT_STAT_L1 0x0020 -/* bits 6 to 7 are reserved */ -#define USB_PORT_STAT_POWER 0x0100 -#define USB_PORT_STAT_LOW_SPEED 0x0200 -#define USB_PORT_STAT_HIGH_SPEED 0x0400 -#define USB_PORT_STAT_TEST 0x0800 -#define USB_PORT_STAT_INDICATOR 0x1000 -/* bits 13 to 15 are reserved */ - -/* - * Additions to wPortStatus bit field from USB 3.0 - * See USB 3.0 spec Table 10-10 - */ -#define USB_PORT_STAT_LINK_STATE 0x01e0 -#define USB_SS_PORT_STAT_POWER 0x0200 -#define USB_SS_PORT_STAT_SPEED 0x1c00 -#define USB_PORT_STAT_SPEED_5GBPS 0x0000 -/* Valid only if port is enabled */ -/* Bits that are the same from USB 2.0 */ -#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \ - USB_PORT_STAT_ENABLE | \ - USB_PORT_STAT_OVERCURRENT | \ - USB_PORT_STAT_RESET) - -/* - * Definitions for PORT_LINK_STATE values - * (bits 5-8) in wPortStatus - */ -#define USB_SS_PORT_LS_U0 0x0000 -#define USB_SS_PORT_LS_U1 0x0020 -#define USB_SS_PORT_LS_U2 0x0040 -#define USB_SS_PORT_LS_U3 0x0060 -#define USB_SS_PORT_LS_SS_DISABLED 0x0080 -#define USB_SS_PORT_LS_RX_DETECT 0x00a0 -#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0 -#define USB_SS_PORT_LS_POLLING 0x00e0 -#define USB_SS_PORT_LS_RECOVERY 0x0100 -#define USB_SS_PORT_LS_HOT_RESET 0x0120 -#define USB_SS_PORT_LS_COMP_MOD 0x0140 -#define USB_SS_PORT_LS_LOOPBACK 0x0160 - -/* - * wPortChange bit field - * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10 - * Bits 0 to 5 shown, bits 6 to 15 are reserved - */ -#define USB_PORT_STAT_C_CONNECTION 0x0001 -#define USB_PORT_STAT_C_ENABLE 0x0002 -#define USB_PORT_STAT_C_SUSPEND 0x0004 -#define USB_PORT_STAT_C_OVERCURRENT 0x0008 -#define USB_PORT_STAT_C_RESET 0x0010 -#define USB_PORT_STAT_C_L1 0x0020 -/* - * USB 3.0 wPortChange bit fields - * See USB 3.0 spec Table 10-11 - */ -#define USB_PORT_STAT_C_BH_RESET 0x0020 -#define USB_PORT_STAT_C_LINK_STATE 0x0040 -#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 - -/* - * wHubCharacteristics (masks) - * See USB 2.0 spec Table 11-13, offset 3 - */ -#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */ -#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */ -#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */ -#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */ - -#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */ - -#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */ -#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */ -#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */ -#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */ - -#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */ -#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */ - -struct usb_hub_status { - __le16 wHubStatus; - __le16 wHubChange; -} __attribute__ ((packed)); - -/* - * Hub Status & Hub Change bit masks - * See USB 2.0 spec Table 11-19 and Table 11-20 - * Bits 0 and 1 for wHubStatus and wHubChange - * Bits 2 to 15 are reserved for both - */ -#define HUB_STATUS_LOCAL_POWER 0x0001 -#define HUB_STATUS_OVERCURRENT 0x0002 -#define HUB_CHANGE_LOCAL_POWER 0x0001 -#define HUB_CHANGE_OVERCURRENT 0x0002 - - -/* - * Hub descriptor - * See USB 2.0 spec Table 11-13 - */ - -#define USB_DT_HUB (USB_TYPE_CLASS | 0x09) -#define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a) -#define USB_DT_HUB_NONVAR_SIZE 7 -#define USB_DT_SS_HUB_SIZE 12 - -/* - * Hub Device descriptor - * USB Hub class device protocols - */ - -#define USB_HUB_PR_FS 0 /* Full speed hub */ -#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ -#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ -#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ -#define USB_HUB_PR_SS 3 /* Super speed hub */ - -struct usb_hub_descriptor { - __u8 bDescLength; - __u8 bDescriptorType; - __u8 bNbrPorts; - __le16 wHubCharacteristics; - __u8 bPwrOn2PwrGood; - __u8 bHubContrCurrent; - - /* 2.0 and 3.0 hubs differ here */ - union { - struct { - /* add 1 bit for hub status change; round to bytes */ - __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; - __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; - } __attribute__ ((packed)) hs; - - struct { - __u8 bHubHdrDecLat; - __le16 wHubDelay; - __le16 DeviceRemovable; - } __attribute__ ((packed)) ss; - } u; -} __attribute__ ((packed)); - -/* port indicator status selectors, tables 11-7 and 11-25 */ -#define HUB_LED_AUTO 0 -#define HUB_LED_AMBER 1 -#define HUB_LED_GREEN 2 -#define HUB_LED_OFF 3 - -enum hub_led_mode { - INDICATOR_AUTO = 0, - INDICATOR_CYCLE, - /* software blinks for attention: software, hardware, reserved */ - INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF, - INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF, - INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF -} __attribute__ ((packed)); - -/* Transaction Translator Think Times, in bits */ -#define HUB_TTTT_8_BITS 0x00 -#define HUB_TTTT_16_BITS 0x20 -#define HUB_TTTT_24_BITS 0x40 -#define HUB_TTTT_32_BITS 0x60 - -#endif /* __LINUX_CH11_H */ diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index d1d732c2838..9c210f2283d 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -29,887 +29,11 @@ * someone that the two other points are non-issues for that * particular descriptor type. */ - #ifndef __LINUX_USB_CH9_H #define __LINUX_USB_CH9_H -#include /* __u8 etc */ -#include /* le16_to_cpu */ - -/*-------------------------------------------------------------------------*/ - -/* CONTROL REQUEST SUPPORT */ - -/* - * USB directions - * - * This bit flag is used in endpoint descriptors' bEndpointAddress field. - * It's also one of three fields in control requests bRequestType. - */ -#define USB_DIR_OUT 0 /* to device */ -#define USB_DIR_IN 0x80 /* to host */ - -/* - * USB types, the second of three bRequestType fields - */ -#define USB_TYPE_MASK (0x03 << 5) -#define USB_TYPE_STANDARD (0x00 << 5) -#define USB_TYPE_CLASS (0x01 << 5) -#define USB_TYPE_VENDOR (0x02 << 5) -#define USB_TYPE_RESERVED (0x03 << 5) - -/* - * USB recipients, the third of three bRequestType fields - */ -#define USB_RECIP_MASK 0x1f -#define USB_RECIP_DEVICE 0x00 -#define USB_RECIP_INTERFACE 0x01 -#define USB_RECIP_ENDPOINT 0x02 -#define USB_RECIP_OTHER 0x03 -/* From Wireless USB 1.0 */ -#define USB_RECIP_PORT 0x04 -#define USB_RECIP_RPIPE 0x05 - -/* - * Standard requests, for the bRequest field of a SETUP packet. - * - * These are qualified by the bRequestType field, so that for example - * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved - * by a GET_STATUS request. - */ -#define USB_REQ_GET_STATUS 0x00 -#define USB_REQ_CLEAR_FEATURE 0x01 -#define USB_REQ_SET_FEATURE 0x03 -#define USB_REQ_SET_ADDRESS 0x05 -#define USB_REQ_GET_DESCRIPTOR 0x06 -#define USB_REQ_SET_DESCRIPTOR 0x07 -#define USB_REQ_GET_CONFIGURATION 0x08 -#define USB_REQ_SET_CONFIGURATION 0x09 -#define USB_REQ_GET_INTERFACE 0x0A -#define USB_REQ_SET_INTERFACE 0x0B -#define USB_REQ_SYNCH_FRAME 0x0C -#define USB_REQ_SET_SEL 0x30 -#define USB_REQ_SET_ISOCH_DELAY 0x31 - -#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ -#define USB_REQ_GET_ENCRYPTION 0x0E -#define USB_REQ_RPIPE_ABORT 0x0E -#define USB_REQ_SET_HANDSHAKE 0x0F -#define USB_REQ_RPIPE_RESET 0x0F -#define USB_REQ_GET_HANDSHAKE 0x10 -#define USB_REQ_SET_CONNECTION 0x11 -#define USB_REQ_SET_SECURITY_DATA 0x12 -#define USB_REQ_GET_SECURITY_DATA 0x13 -#define USB_REQ_SET_WUSB_DATA 0x14 -#define USB_REQ_LOOPBACK_DATA_WRITE 0x15 -#define USB_REQ_LOOPBACK_DATA_READ 0x16 -#define USB_REQ_SET_INTERFACE_DS 0x17 - -/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, - * used by hubs to put ports into a new L1 suspend state, except that it - * forgot to define its number ... - */ - -/* - * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and - * are read as a bit array returned by USB_REQ_GET_STATUS. (So there - * are at most sixteen features of each type.) Hubs may also support a - * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. - */ -#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ -#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ -#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ -#define USB_DEVICE_BATTERY 2 /* (wireless) */ -#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ -#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ -#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ -#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ -#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ - -/* - * Test Mode Selectors - * See USB 2.0 spec Table 9-7 - */ -#define TEST_J 1 -#define TEST_K 2 -#define TEST_SE0_NAK 3 -#define TEST_PACKET 4 -#define TEST_FORCE_EN 5 - -/* - * New Feature Selectors as added by USB 3.0 - * See USB 3.0 spec Table 9-6 - */ -#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ -#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ -#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */ -#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ - -#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 -/* - * Suspend Options, Table 9-7 USB 3.0 spec - */ -#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) -#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) - -#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ - -/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ -#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */ -#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ -#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ - -/** - * struct usb_ctrlrequest - SETUP data for a USB device control request - * @bRequestType: matches the USB bmRequestType field - * @bRequest: matches the USB bRequest field - * @wValue: matches the USB wValue field (le16 byte order) - * @wIndex: matches the USB wIndex field (le16 byte order) - * @wLength: matches the USB wLength field (le16 byte order) - * - * This structure is used to send control requests to a USB device. It matches - * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the - * USB spec for a fuller description of the different fields, and what they are - * used for. - * - * Note that the driver for any interface can issue control requests. - * For most devices, interfaces don't coordinate with each other, so - * such requests may be made at any time. - */ -struct usb_ctrlrequest { - __u8 bRequestType; - __u8 bRequest; - __le16 wValue; - __le16 wIndex; - __le16 wLength; -} __attribute__ ((packed)); - -/*-------------------------------------------------------------------------*/ - -/* - * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or - * (rarely) accepted by SET_DESCRIPTOR. - * - * Note that all multi-byte values here are encoded in little endian - * byte order "on the wire". Within the kernel and when exposed - * through the Linux-USB APIs, they are not converted to cpu byte - * order; it is the responsibility of the client code to do this. - * The single exception is when device and configuration descriptors (but - * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); - * in this case the fields are converted to host endianness by the kernel. - */ - -/* - * Descriptor types ... USB 2.0 spec table 9.5 - */ -#define USB_DT_DEVICE 0x01 -#define USB_DT_CONFIG 0x02 -#define USB_DT_STRING 0x03 -#define USB_DT_INTERFACE 0x04 -#define USB_DT_ENDPOINT 0x05 -#define USB_DT_DEVICE_QUALIFIER 0x06 -#define USB_DT_OTHER_SPEED_CONFIG 0x07 -#define USB_DT_INTERFACE_POWER 0x08 -/* these are from a minor usb 2.0 revision (ECN) */ -#define USB_DT_OTG 0x09 -#define USB_DT_DEBUG 0x0a -#define USB_DT_INTERFACE_ASSOCIATION 0x0b -/* these are from the Wireless USB spec */ -#define USB_DT_SECURITY 0x0c -#define USB_DT_KEY 0x0d -#define USB_DT_ENCRYPTION_TYPE 0x0e -#define USB_DT_BOS 0x0f -#define USB_DT_DEVICE_CAPABILITY 0x10 -#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 -#define USB_DT_WIRE_ADAPTER 0x21 -#define USB_DT_RPIPE 0x22 -#define USB_DT_CS_RADIO_CONTROL 0x23 -/* From the T10 UAS specification */ -#define USB_DT_PIPE_USAGE 0x24 -/* From the USB 3.0 spec */ -#define USB_DT_SS_ENDPOINT_COMP 0x30 - -/* Conventional codes for class-specific descriptors. The convention is - * defined in the USB "Common Class" Spec (3.11). Individual class specs - * are authoritative for their usage, not the "common class" writeup. - */ -#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) -#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) -#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) -#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) -#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) - -/* All standard descriptors have these 2 fields at the beginning */ -struct usb_descriptor_header { - __u8 bLength; - __u8 bDescriptorType; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE: Device descriptor */ -struct usb_device_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __le16 idVendor; - __le16 idProduct; - __le16 bcdDevice; - __u8 iManufacturer; - __u8 iProduct; - __u8 iSerialNumber; - __u8 bNumConfigurations; -} __attribute__ ((packed)); - -#define USB_DT_DEVICE_SIZE 18 - - -/* - * Device and/or Interface Class codes - * as found in bDeviceClass or bInterfaceClass - * and defined by www.usb.org documents - */ -#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ -#define USB_CLASS_AUDIO 1 -#define USB_CLASS_COMM 2 -#define USB_CLASS_HID 3 -#define USB_CLASS_PHYSICAL 5 -#define USB_CLASS_STILL_IMAGE 6 -#define USB_CLASS_PRINTER 7 -#define USB_CLASS_MASS_STORAGE 8 -#define USB_CLASS_HUB 9 -#define USB_CLASS_CDC_DATA 0x0a -#define USB_CLASS_CSCID 0x0b /* chip+ smart card */ -#define USB_CLASS_CONTENT_SEC 0x0d /* content security */ -#define USB_CLASS_VIDEO 0x0e -#define USB_CLASS_WIRELESS_CONTROLLER 0xe0 -#define USB_CLASS_MISC 0xef -#define USB_CLASS_APP_SPEC 0xfe -#define USB_CLASS_VENDOR_SPEC 0xff - -#define USB_SUBCLASS_VENDOR_SPEC 0xff - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_CONFIG: Configuration descriptor information. - * - * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the - * descriptor type is different. Highspeed-capable devices can look - * different depending on what speed they're currently running. Only - * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG - * descriptors. - */ -struct usb_config_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumInterfaces; - __u8 bConfigurationValue; - __u8 iConfiguration; - __u8 bmAttributes; - __u8 bMaxPower; -} __attribute__ ((packed)); - -#define USB_DT_CONFIG_SIZE 9 - -/* from config descriptor bmAttributes */ -#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ -#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ -#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ -#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_STRING: String descriptor */ -struct usb_string_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wData[1]; /* UTF-16LE encoded */ -} __attribute__ ((packed)); - -/* note that "string" zero is special, it holds language codes that - * the device supports, not Unicode characters. - */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_INTERFACE: Interface descriptor */ -struct usb_interface_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bInterfaceNumber; - __u8 bAlternateSetting; - __u8 bNumEndpoints; - __u8 bInterfaceClass; - __u8 bInterfaceSubClass; - __u8 bInterfaceProtocol; - __u8 iInterface; -} __attribute__ ((packed)); - -#define USB_DT_INTERFACE_SIZE 9 - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_ENDPOINT: Endpoint descriptor */ -struct usb_endpoint_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEndpointAddress; - __u8 bmAttributes; - __le16 wMaxPacketSize; - __u8 bInterval; - - /* NOTE: these two are _only_ in audio endpoints. */ - /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ - __u8 bRefresh; - __u8 bSynchAddress; -} __attribute__ ((packed)); - -#define USB_DT_ENDPOINT_SIZE 7 -#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ - - -/* - * Endpoints - */ -#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ -#define USB_ENDPOINT_DIR_MASK 0x80 - -#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ -#define USB_ENDPOINT_XFER_CONTROL 0 -#define USB_ENDPOINT_XFER_ISOC 1 -#define USB_ENDPOINT_XFER_BULK 2 -#define USB_ENDPOINT_XFER_INT 3 -#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 - -/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */ -#define USB_ENDPOINT_INTRTYPE 0x30 -#define USB_ENDPOINT_INTR_PERIODIC (0 << 4) -#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4) - -#define USB_ENDPOINT_SYNCTYPE 0x0c -#define USB_ENDPOINT_SYNC_NONE (0 << 2) -#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) -#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) -#define USB_ENDPOINT_SYNC_SYNC (3 << 2) - -#define USB_ENDPOINT_USAGE_MASK 0x30 -#define USB_ENDPOINT_USAGE_DATA 0x00 -#define USB_ENDPOINT_USAGE_FEEDBACK 0x10 -#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */ - -/*-------------------------------------------------------------------------*/ - -/** - * usb_endpoint_num - get the endpoint's number - * @epd: endpoint to be checked - * - * Returns @epd's number: 0 to 15. - */ -static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) -{ - return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; -} - -/** - * usb_endpoint_type - get the endpoint's transfer type - * @epd: endpoint to be checked - * - * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according - * to @epd's transfer type. - */ -static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) -{ - return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; -} - -/** - * usb_endpoint_dir_in - check if the endpoint has IN direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type IN, otherwise it returns false. - */ -static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); -} - -/** - * usb_endpoint_dir_out - check if the endpoint has OUT direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type OUT, otherwise it returns false. - */ -static inline int usb_endpoint_dir_out( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); -} - -/** - * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type bulk, otherwise it returns false. - */ -static inline int usb_endpoint_xfer_bulk( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_BULK); -} - -/** - * usb_endpoint_xfer_control - check if the endpoint has control transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type control, otherwise it returns false. - */ -static inline int usb_endpoint_xfer_control( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_CONTROL); -} - -/** - * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type interrupt, otherwise it returns - * false. - */ -static inline int usb_endpoint_xfer_int( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_INT); -} - -/** - * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type isochronous, otherwise it returns - * false. - */ -static inline int usb_endpoint_xfer_isoc( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_ISOC); -} - -/** - * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and IN direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_bulk_in( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd); -} - -/** - * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and OUT direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_bulk_out( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd); -} - -/** - * usb_endpoint_is_int_in - check if the endpoint is interrupt IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and IN direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_int_in( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd); -} - -/** - * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and OUT direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_int_out( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd); -} - -/** - * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and IN direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_isoc_in( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd); -} - -/** - * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and OUT direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_isoc_out( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); -} - -/** - * usb_endpoint_maxp - get endpoint's max packet size - * @epd: endpoint to be checked - * - * Returns @epd's max packet - */ -static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) -{ - return __le16_to_cpu(epd->wMaxPacketSize); -} - -static inline int usb_endpoint_interrupt_type( - const struct usb_endpoint_descriptor *epd) -{ - return epd->bmAttributes & USB_ENDPOINT_INTRTYPE; -} - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ -struct usb_ss_ep_comp_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bMaxBurst; - __u8 bmAttributes; - __le16 wBytesPerInterval; -} __attribute__ ((packed)); - -#define USB_DT_SS_EP_COMP_SIZE 6 - -/* Bits 4:0 of bmAttributes if this is a bulk endpoint */ -static inline int -usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp) -{ - int max_streams; - - if (!comp) - return 0; - - max_streams = comp->bmAttributes & 0x1f; - - if (!max_streams) - return 0; - - max_streams = 1 << max_streams; - - return max_streams; -} - -/* Bits 1:0 of bmAttributes if this is an isoc endpoint */ -#define USB_SS_MULT(p) (1 + ((p) & 0x3)) - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ -struct usb_qualifier_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __u8 bNumConfigurations; - __u8 bRESERVED; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_OTG (from OTG 1.0a supplement) */ -struct usb_otg_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bmAttributes; /* support for HNP, SRP, etc */ -} __attribute__ ((packed)); - -/* from usb_otg_descriptor.bmAttributes */ -#define USB_OTG_SRP (1 << 0) -#define USB_OTG_HNP (1 << 1) /* swap host/device roles */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ -struct usb_debug_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - /* bulk endpoints with 8 byte maxpacket */ - __u8 bDebugInEndpoint; - __u8 bDebugOutEndpoint; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ -struct usb_interface_assoc_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bFirstInterface; - __u8 bInterfaceCount; - __u8 bFunctionClass; - __u8 bFunctionSubClass; - __u8 bFunctionProtocol; - __u8 iFunction; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_SECURITY: group of wireless security descriptors, including - * encryption types available for setting up a CC/association. - */ -struct usb_security_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumEncryptionTypes; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys - * may be retrieved. - */ -struct usb_key_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 tTKID[3]; - __u8 bReserved; - __u8 bKeyData[0]; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ -struct usb_encryption_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEncryptionType; -#define USB_ENC_TYPE_UNSECURE 0 -#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ -#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ -#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ - __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ - __u8 bAuthKeyIndex; -} __attribute__((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_BOS: group of device-level capabilities */ -struct usb_bos_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumDeviceCaps; -} __attribute__((packed)); - -#define USB_DT_BOS_SIZE 5 -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ -struct usb_dev_cap_header { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; -} __attribute__((packed)); - -#define USB_CAP_TYPE_WIRELESS_USB 1 - -struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - - __u8 bmAttributes; -#define USB_WIRELESS_P2P_DRD (1 << 1) -#define USB_WIRELESS_BEACON_MASK (3 << 2) -#define USB_WIRELESS_BEACON_SELF (1 << 2) -#define USB_WIRELESS_BEACON_DIRECTED (2 << 2) -#define USB_WIRELESS_BEACON_NONE (3 << 2) - __le16 wPHYRates; /* bit rates, Mbps */ -#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ -#define USB_WIRELESS_PHY_80 (1 << 1) -#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ -#define USB_WIRELESS_PHY_160 (1 << 3) -#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ -#define USB_WIRELESS_PHY_320 (1 << 5) -#define USB_WIRELESS_PHY_400 (1 << 6) -#define USB_WIRELESS_PHY_480 (1 << 7) - __u8 bmTFITXPowerInfo; /* TFI power levels */ - __u8 bmFFITXPowerInfo; /* FFI power levels */ - __le16 bmBandGroup; - __u8 bReserved; -} __attribute__((packed)); - -/* USB 2.0 Extension descriptor */ -#define USB_CAP_TYPE_EXT 2 - -struct usb_ext_cap_descriptor { /* Link Power Management */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __le32 bmAttributes; -#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ -#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */ -#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/ -#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */ -#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8) -#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12) -} __attribute__((packed)); - -#define USB_DT_USB_EXT_CAP_SIZE 7 - -/* - * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB - * specific device level capabilities - */ -#define USB_SS_CAP_TYPE 3 -struct usb_ss_cap_descriptor { /* Link Power Management */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __u8 bmAttributes; -#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */ - __le16 wSpeedSupported; -#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */ -#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */ -#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */ -#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */ - __u8 bFunctionalitySupport; - __u8 bU1devExitLat; - __le16 bU2DevExitLat; -} __attribute__((packed)); - -#define USB_DT_USB_SS_CAP_SIZE 10 - -/* - * Container ID Capability descriptor: Defines the instance unique ID used to - * identify the instance across all operating modes - */ -#define CONTAINER_ID_TYPE 4 -struct usb_ss_container_id_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __u8 bReserved; - __u8 ContainerID[16]; /* 128-bit number */ -} __attribute__((packed)); - -#define USB_DT_USB_SS_CONTN_ID_SIZE 20 -/*-------------------------------------------------------------------------*/ - -/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with - * each endpoint descriptor for a wireless device - */ -struct usb_wireless_ep_comp_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bMaxBurst; - __u8 bMaxSequence; - __le16 wMaxStreamDelay; - __le16 wOverTheAirPacketSize; - __u8 bOverTheAirInterval; - __u8 bmCompAttributes; -#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ -#define USB_ENDPOINT_SWITCH_NO 0 -#define USB_ENDPOINT_SWITCH_SWITCH 1 -#define USB_ENDPOINT_SWITCH_SCALE 2 -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless - * host and a device for connection set up, mutual authentication, and - * exchanging short lived session keys. The handshake depends on a CC. - */ -struct usb_handshake { - __u8 bMessageNumber; - __u8 bStatus; - __u8 tTKID[3]; - __u8 bReserved; - __u8 CDID[16]; - __u8 nonce[16]; - __u8 MIC[8]; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). - * A CC may also be set up using non-wireless secure channels (including - * wired USB!), and some devices may support CCs with multiple hosts. - */ -struct usb_connection_context { - __u8 CHID[16]; /* persistent host id */ - __u8 CDID[16]; /* device id (unique w/in host context) */ - __u8 CK[16]; /* connection key */ -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ +#include -/* USB 2.0 defines three speeds, here's how Linux identifies them */ - -enum usb_device_speed { - USB_SPEED_UNKNOWN = 0, /* enumerating */ - USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ - USB_SPEED_HIGH, /* usb 2.0 */ - USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ - USB_SPEED_SUPER, /* usb 3.0 */ -}; - -#ifdef __KERNEL__ /** * usb_speed_string() - Returns human readable-name of the speed. @@ -919,86 +43,4 @@ enum usb_device_speed { */ extern const char *usb_speed_string(enum usb_device_speed speed); -#endif - -enum usb_device_state { - /* NOTATTACHED isn't in the USB spec, and this state acts - * the same as ATTACHED ... but it's clearer this way. - */ - USB_STATE_NOTATTACHED = 0, - - /* chapter 9 and authentication (wireless) device states */ - USB_STATE_ATTACHED, - USB_STATE_POWERED, /* wired */ - USB_STATE_RECONNECTING, /* auth */ - USB_STATE_UNAUTHENTICATED, /* auth */ - USB_STATE_DEFAULT, /* limited function */ - USB_STATE_ADDRESS, - USB_STATE_CONFIGURED, /* most functions */ - - USB_STATE_SUSPENDED - - /* NOTE: there are actually four different SUSPENDED - * states, returning to POWERED, DEFAULT, ADDRESS, or - * CONFIGURED respectively when SOF tokens flow again. - * At this level there's no difference between L1 and L2 - * suspend states. (L2 being original USB 1.1 suspend.) - */ -}; - -enum usb3_link_state { - USB3_LPM_U0 = 0, - USB3_LPM_U1, - USB3_LPM_U2, - USB3_LPM_U3 -}; - -/* - * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1. - * 0xff means the parent hub will accept transitions to U1, but will not - * initiate a transition. - * - * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to - * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved - * values. - * - * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2. - * 0xff means the parent hub will accept transitions to U2, but will not - * initiate a transition. - * - * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to - * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2 - * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means - * 65.024ms. - */ -#define USB3_LPM_DISABLED 0x0 -#define USB3_LPM_U1_MAX_TIMEOUT 0x7F -#define USB3_LPM_U2_MAX_TIMEOUT 0xFE -#define USB3_LPM_DEVICE_INITIATED 0xFF - -struct usb_set_sel_req { - __u8 u1_sel; - __u8 u1_pel; - __le16 u2_sel; - __le16 u2_pel; -} __attribute__ ((packed)); - -/* - * The Set System Exit Latency control transfer provides one byte each for - * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each - * are two bytes long. - */ -#define USB3_LPM_MAX_U1_SEL_PEL 0xFF -#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF - -/*-------------------------------------------------------------------------*/ - -/* - * As per USB compliance update, a device that is actively drawing - * more than 100mA from USB must report itself as bus-powered in - * the GetStatus(DEVICE) call. - * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34 - */ -#define USB_SELF_POWER_VBUS_MAX_DRAW 100 - #endif /* __LINUX_USB_CH9_H */ diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h index a843d085136..65d0a88dbc6 100644 --- a/include/linux/usb/functionfs.h +++ b/include/linux/usb/functionfs.h @@ -1,171 +1,8 @@ #ifndef __LINUX_FUNCTIONFS_H__ #define __LINUX_FUNCTIONFS_H__ 1 +#include -#include -#include - -#include - - -enum { - FUNCTIONFS_DESCRIPTORS_MAGIC = 1, - FUNCTIONFS_STRINGS_MAGIC = 2 -}; - - -#ifndef __KERNEL__ - -/* Descriptor of an non-audio endpoint */ -struct usb_endpoint_descriptor_no_audio { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEndpointAddress; - __u8 bmAttributes; - __le16 wMaxPacketSize; - __u8 bInterval; -} __attribute__((packed)); - - -/* - * All numbers must be in little endian order. - */ - -struct usb_functionfs_descs_head { - __le32 magic; - __le32 length; - __le32 fs_count; - __le32 hs_count; -} __attribute__((packed)); - -/* - * Descriptors format: - * - * | off | name | type | description | - * |-----+-----------+--------------+--------------------------------------| - * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC | - * | 4 | length | LE32 | length of the whole data chunk | - * | 8 | fs_count | LE32 | number of full-speed descriptors | - * | 12 | hs_count | LE32 | number of high-speed descriptors | - * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors | - * | | hs_descrs | Descriptor[] | list of high-speed descriptors | - * - * descs are just valid USB descriptors and have the following format: - * - * | off | name | type | description | - * |-----+-----------------+------+--------------------------| - * | 0 | bLength | U8 | length of the descriptor | - * | 1 | bDescriptorType | U8 | descriptor type | - * | 2 | payload | | descriptor's payload | - */ - -struct usb_functionfs_strings_head { - __le32 magic; - __le32 length; - __le32 str_count; - __le32 lang_count; -} __attribute__((packed)); - -/* - * Strings format: - * - * | off | name | type | description | - * |-----+------------+-----------------------+----------------------------| - * | 0 | magic | LE32 | FUNCTIONFS_STRINGS_MAGIC | - * | 4 | length | LE32 | length of the data chunk | - * | 8 | str_count | LE32 | number of strings | - * | 12 | lang_count | LE32 | number of languages | - * | 16 | stringtab | StringTab[lang_count] | table of strings per lang | - * - * For each language there is one stringtab entry (ie. there are lang_count - * stringtab entires). Each StringTab has following format: - * - * | off | name | type | description | - * |-----+---------+-------------------+------------------------------------| - * | 0 | lang | LE16 | language code | - * | 2 | strings | String[str_count] | array of strings in given language | - * - * For each string there is one strings entry (ie. there are str_count - * string entries). Each String is a NUL terminated string encoded in - * UTF-8. - */ - -#endif - - -/* - * Events are delivered on the ep0 file descriptor, when the user mode driver - * reads from this file descriptor after writing the descriptors. Don't - * stop polling this descriptor. - */ - -enum usb_functionfs_event_type { - FUNCTIONFS_BIND, - FUNCTIONFS_UNBIND, - - FUNCTIONFS_ENABLE, - FUNCTIONFS_DISABLE, - - FUNCTIONFS_SETUP, - - FUNCTIONFS_SUSPEND, - FUNCTIONFS_RESUME -}; - -/* NOTE: this structure must stay the same size and layout on - * both 32-bit and 64-bit kernels. - */ -struct usb_functionfs_event { - union { - /* SETUP: packet; DATA phase i/o precedes next event - *(setup.bmRequestType & USB_DIR_IN) flags direction */ - struct usb_ctrlrequest setup; - } __attribute__((packed)) u; - - /* enum usb_functionfs_event_type */ - __u8 type; - __u8 _pad[3]; -} __attribute__((packed)); - - -/* Endpoint ioctls */ -/* The same as in gadgetfs */ - -/* IN transfers may be reported to the gadget driver as complete - * when the fifo is loaded, before the host reads the data; - * OUT transfers may be reported to the host's "client" driver as - * complete when they're sitting in the FIFO unread. - * THIS returns how many bytes are "unclaimed" in the endpoint fifo - * (needed for precise fault handling, when the hardware allows it) - */ -#define FUNCTIONFS_FIFO_STATUS _IO('g', 1) - -/* discards any unclaimed data in the fifo. */ -#define FUNCTIONFS_FIFO_FLUSH _IO('g', 2) - -/* resets endpoint halt+toggle; used to implement set_interface. - * some hardware (like pxa2xx) can't support this. - */ -#define FUNCTIONFS_CLEAR_HALT _IO('g', 3) - -/* Specific for functionfs */ - -/* - * Returns reverse mapping of an interface. Called on EP0. If there - * is no such interface returns -EDOM. If function is not active - * returns -ENODEV. - */ -#define FUNCTIONFS_INTERFACE_REVMAP _IO('g', 128) - -/* - * Returns real bEndpointAddress of an endpoint. If function is not - * active returns -ENODEV. - */ -#define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129) - - -#ifdef __KERNEL__ struct ffs_data; struct usb_composite_dev; @@ -197,5 +34,3 @@ static void functionfs_release_dev_callback(struct ffs_data *ffs_data) #endif - -#endif diff --git a/include/linux/usb/g_printer.h b/include/linux/usb/g_printer.h deleted file mode 100644 index 6178fde50f7..00000000000 --- a/include/linux/usb/g_printer.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * g_printer.h -- Header file for USB Printer gadget driver - * - * Copyright (C) 2007 Craig W. Nadler - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __LINUX_USB_G_PRINTER_H -#define __LINUX_USB_G_PRINTER_H - -#define PRINTER_NOT_ERROR 0x08 -#define PRINTER_SELECTED 0x10 -#define PRINTER_PAPER_EMPTY 0x20 - -/* The 'g' code is also used by gadgetfs ioctl requests. - * Don't add any colliding codes to either driver, and keep - * them in unique ranges (size 0x20 for now). - */ -#define GADGET_GET_PRINTER_STATUS _IOR('g', 0x21, unsigned char) -#define GADGET_SET_PRINTER_STATUS _IOWR('g', 0x22, unsigned char) - -#endif /* __LINUX_USB_G_PRINTER_H */ diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h deleted file mode 100644 index 0bb12e0d4f8..00000000000 --- a/include/linux/usb/gadgetfs.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Filesystem based user-mode API to USB Gadget controller hardware - * - * Other than ep0 operations, most things are done by read() and write() - * on endpoint files found in one directory. They are configured by - * writing descriptors, and then may be used for normal stream style - * i/o requests. When ep0 is configured, the device can enumerate; - * when it's closed, the device disconnects from usb. Operations on - * ep0 require ioctl() operations. - * - * Configuration and device descriptors get written to /dev/gadget/$CHIP, - * which may then be used to read usb_gadgetfs_event structs. The driver - * may activate endpoints as it handles SET_CONFIGURATION setup events, - * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT - * then performing data transfers by reading or writing. - */ - -#ifndef __LINUX_USB_GADGETFS_H -#define __LINUX_USB_GADGETFS_H - -#include -#include - -#include - -/* - * Events are delivered on the ep0 file descriptor, when the user mode driver - * reads from this file descriptor after writing the descriptors. Don't - * stop polling this descriptor. - */ - -enum usb_gadgetfs_event_type { - GADGETFS_NOP = 0, - - GADGETFS_CONNECT, - GADGETFS_DISCONNECT, - GADGETFS_SETUP, - GADGETFS_SUSPEND, - /* and likely more ! */ -}; - -/* NOTE: this structure must stay the same size and layout on - * both 32-bit and 64-bit kernels. - */ -struct usb_gadgetfs_event { - union { - /* NOP, DISCONNECT, SUSPEND: nothing - * ... some hardware can't report disconnection - */ - - /* CONNECT: just the speed */ - enum usb_device_speed speed; - - /* SETUP: packet; DATA phase i/o precedes next event - *(setup.bmRequestType & USB_DIR_IN) flags direction - * ... includes SET_CONFIGURATION, SET_INTERFACE - */ - struct usb_ctrlrequest setup; - } u; - enum usb_gadgetfs_event_type type; -}; - - -/* The 'g' code is also used by printer gadget ioctl requests. - * Don't add any colliding codes to either driver, and keep - * them in unique ranges (size 0x20 for now). - */ - -/* endpoint ioctls */ - -/* IN transfers may be reported to the gadget driver as complete - * when the fifo is loaded, before the host reads the data; - * OUT transfers may be reported to the host's "client" driver as - * complete when they're sitting in the FIFO unread. - * THIS returns how many bytes are "unclaimed" in the endpoint fifo - * (needed for precise fault handling, when the hardware allows it) - */ -#define GADGETFS_FIFO_STATUS _IO('g', 1) - -/* discards any unclaimed data in the fifo. */ -#define GADGETFS_FIFO_FLUSH _IO('g', 2) - -/* resets endpoint halt+toggle; used to implement set_interface. - * some hardware (like pxa2xx) can't support this. - */ -#define GADGETFS_CLEAR_HALT _IO('g', 3) - -#endif /* __LINUX_USB_GADGETFS_H */ diff --git a/include/linux/usb/midi.h b/include/linux/usb/midi.h deleted file mode 100644 index c8c52e3c91d..00000000000 --- a/include/linux/usb/midi.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * -- USB MIDI definitions. - * - * Copyright (C) 2006 Thumtronics Pty Ltd. - * Developed for Thumtronics by Grey Innovation - * Ben Williamson - * - * This software is distributed under the terms of the GNU General Public - * License ("GPL") version 2, as published by the Free Software Foundation. - * - * This file holds USB constants and structures defined - * by the USB Device Class Definition for MIDI Devices. - * Comments below reference relevant sections of that document: - * - * http://www.usb.org/developers/devclass_docs/midi10.pdf - */ - -#ifndef __LINUX_USB_MIDI_H -#define __LINUX_USB_MIDI_H - -#include - -/* A.1 MS Class-Specific Interface Descriptor Subtypes */ -#define USB_MS_HEADER 0x01 -#define USB_MS_MIDI_IN_JACK 0x02 -#define USB_MS_MIDI_OUT_JACK 0x03 -#define USB_MS_ELEMENT 0x04 - -/* A.2 MS Class-Specific Endpoint Descriptor Subtypes */ -#define USB_MS_GENERAL 0x01 - -/* A.3 MS MIDI IN and OUT Jack Types */ -#define USB_MS_EMBEDDED 0x01 -#define USB_MS_EXTERNAL 0x02 - -/* 6.1.2.1 Class-Specific MS Interface Header Descriptor */ -struct usb_ms_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __le16 bcdMSC; - __le16 wTotalLength; -} __attribute__ ((packed)); - -#define USB_DT_MS_HEADER_SIZE 7 - -/* 6.1.2.2 MIDI IN Jack Descriptor */ -struct usb_midi_in_jack_descriptor { - __u8 bLength; - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* USB_MS_MIDI_IN_JACK */ - __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ - __u8 bJackID; - __u8 iJack; -} __attribute__ ((packed)); - -#define USB_DT_MIDI_IN_SIZE 6 - -struct usb_midi_source_pin { - __u8 baSourceID; - __u8 baSourcePin; -} __attribute__ ((packed)); - -/* 6.1.2.3 MIDI OUT Jack Descriptor */ -struct usb_midi_out_jack_descriptor { - __u8 bLength; - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* USB_MS_MIDI_OUT_JACK */ - __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ - __u8 bJackID; - __u8 bNrInputPins; /* p */ - struct usb_midi_source_pin pins[]; /* [p] */ - /*__u8 iJack; -- omitted due to variable-sized pins[] */ -} __attribute__ ((packed)); - -#define USB_DT_MIDI_OUT_SIZE(p) (7 + 2 * (p)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(p) \ -struct usb_midi_out_jack_descriptor_##p { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bJackType; \ - __u8 bJackID; \ - __u8 bNrInputPins; \ - struct usb_midi_source_pin pins[p]; \ - __u8 iJack; \ -} __attribute__ ((packed)) - -/* 6.2.2 Class-Specific MS Bulk Data Endpoint Descriptor */ -struct usb_ms_endpoint_descriptor { - __u8 bLength; /* 4+n */ - __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ - __u8 bDescriptorSubtype; /* USB_MS_GENERAL */ - __u8 bNumEmbMIDIJack; /* n */ - __u8 baAssocJackID[]; /* [n] */ -} __attribute__ ((packed)); - -#define USB_DT_MS_ENDPOINT_SIZE(n) (4 + (n)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(n) \ -struct usb_ms_endpoint_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bNumEmbMIDIJack; \ - __u8 baAssocJackID[n]; \ -} __attribute__ ((packed)) - -#endif /* __LINUX_USB_MIDI_H */ diff --git a/include/linux/usb/tmc.h b/include/linux/usb/tmc.h deleted file mode 100644 index c045ae12556..00000000000 --- a/include/linux/usb/tmc.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany - * Copyright (C) 2008 Novell, Inc. - * Copyright (C) 2008 Greg Kroah-Hartman - * - * This file holds USB constants defined by the USB Device Class - * Definition for Test and Measurement devices published by the USB-IF. - * - * It also has the ioctl definitions for the usbtmc kernel driver that - * userspace needs to know about. - */ - -#ifndef __LINUX_USB_TMC_H -#define __LINUX_USB_TMC_H - -/* USB TMC status values */ -#define USBTMC_STATUS_SUCCESS 0x01 -#define USBTMC_STATUS_PENDING 0x02 -#define USBTMC_STATUS_FAILED 0x80 -#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81 -#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82 -#define USBTMC_STATUS_SPLIT_IN_PROGRESS 0x83 - -/* USB TMC requests values */ -#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT 1 -#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS 2 -#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN 3 -#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS 4 -#define USBTMC_REQUEST_INITIATE_CLEAR 5 -#define USBTMC_REQUEST_CHECK_CLEAR_STATUS 6 -#define USBTMC_REQUEST_GET_CAPABILITIES 7 -#define USBTMC_REQUEST_INDICATOR_PULSE 64 - -/* Request values for USBTMC driver's ioctl entry point */ -#define USBTMC_IOC_NR 91 -#define USBTMC_IOCTL_INDICATOR_PULSE _IO(USBTMC_IOC_NR, 1) -#define USBTMC_IOCTL_CLEAR _IO(USBTMC_IOC_NR, 2) -#define USBTMC_IOCTL_ABORT_BULK_OUT _IO(USBTMC_IOC_NR, 3) -#define USBTMC_IOCTL_ABORT_BULK_IN _IO(USBTMC_IOC_NR, 4) -#define USBTMC_IOCTL_CLEAR_OUT_HALT _IO(USBTMC_IOC_NR, 6) -#define USBTMC_IOCTL_CLEAR_IN_HALT _IO(USBTMC_IOC_NR, 7) - -#endif diff --git a/include/linux/usb/video.h b/include/linux/usb/video.h deleted file mode 100644 index 3b3b95e01f7..00000000000 --- a/include/linux/usb/video.h +++ /dev/null @@ -1,568 +0,0 @@ -/* - * USB Video Class definitions. - * - * Copyright (C) 2009 Laurent Pinchart - * - * This file holds USB constants and structures defined by the USB Device - * Class Definition for Video Devices. Unless otherwise stated, comments - * below reference relevant sections of the USB Video Class 1.1 specification - * available at - * - * http://www.usb.org/developers/devclass_docs/USB_Video_Class_1_1.zip - */ - -#ifndef __LINUX_USB_VIDEO_H -#define __LINUX_USB_VIDEO_H - -#include - -/* -------------------------------------------------------------------------- - * UVC constants - */ - -/* A.2. Video Interface Subclass Codes */ -#define UVC_SC_UNDEFINED 0x00 -#define UVC_SC_VIDEOCONTROL 0x01 -#define UVC_SC_VIDEOSTREAMING 0x02 -#define UVC_SC_VIDEO_INTERFACE_COLLECTION 0x03 - -/* A.3. Video Interface Protocol Codes */ -#define UVC_PC_PROTOCOL_UNDEFINED 0x00 - -/* A.5. Video Class-Specific VC Interface Descriptor Subtypes */ -#define UVC_VC_DESCRIPTOR_UNDEFINED 0x00 -#define UVC_VC_HEADER 0x01 -#define UVC_VC_INPUT_TERMINAL 0x02 -#define UVC_VC_OUTPUT_TERMINAL 0x03 -#define UVC_VC_SELECTOR_UNIT 0x04 -#define UVC_VC_PROCESSING_UNIT 0x05 -#define UVC_VC_EXTENSION_UNIT 0x06 - -/* A.6. Video Class-Specific VS Interface Descriptor Subtypes */ -#define UVC_VS_UNDEFINED 0x00 -#define UVC_VS_INPUT_HEADER 0x01 -#define UVC_VS_OUTPUT_HEADER 0x02 -#define UVC_VS_STILL_IMAGE_FRAME 0x03 -#define UVC_VS_FORMAT_UNCOMPRESSED 0x04 -#define UVC_VS_FRAME_UNCOMPRESSED 0x05 -#define UVC_VS_FORMAT_MJPEG 0x06 -#define UVC_VS_FRAME_MJPEG 0x07 -#define UVC_VS_FORMAT_MPEG2TS 0x0a -#define UVC_VS_FORMAT_DV 0x0c -#define UVC_VS_COLORFORMAT 0x0d -#define UVC_VS_FORMAT_FRAME_BASED 0x10 -#define UVC_VS_FRAME_FRAME_BASED 0x11 -#define UVC_VS_FORMAT_STREAM_BASED 0x12 - -/* A.7. Video Class-Specific Endpoint Descriptor Subtypes */ -#define UVC_EP_UNDEFINED 0x00 -#define UVC_EP_GENERAL 0x01 -#define UVC_EP_ENDPOINT 0x02 -#define UVC_EP_INTERRUPT 0x03 - -/* A.8. Video Class-Specific Request Codes */ -#define UVC_RC_UNDEFINED 0x00 -#define UVC_SET_CUR 0x01 -#define UVC_GET_CUR 0x81 -#define UVC_GET_MIN 0x82 -#define UVC_GET_MAX 0x83 -#define UVC_GET_RES 0x84 -#define UVC_GET_LEN 0x85 -#define UVC_GET_INFO 0x86 -#define UVC_GET_DEF 0x87 - -/* A.9.1. VideoControl Interface Control Selectors */ -#define UVC_VC_CONTROL_UNDEFINED 0x00 -#define UVC_VC_VIDEO_POWER_MODE_CONTROL 0x01 -#define UVC_VC_REQUEST_ERROR_CODE_CONTROL 0x02 - -/* A.9.2. Terminal Control Selectors */ -#define UVC_TE_CONTROL_UNDEFINED 0x00 - -/* A.9.3. Selector Unit Control Selectors */ -#define UVC_SU_CONTROL_UNDEFINED 0x00 -#define UVC_SU_INPUT_SELECT_CONTROL 0x01 - -/* A.9.4. Camera Terminal Control Selectors */ -#define UVC_CT_CONTROL_UNDEFINED 0x00 -#define UVC_CT_SCANNING_MODE_CONTROL 0x01 -#define UVC_CT_AE_MODE_CONTROL 0x02 -#define UVC_CT_AE_PRIORITY_CONTROL 0x03 -#define UVC_CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 -#define UVC_CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 -#define UVC_CT_FOCUS_ABSOLUTE_CONTROL 0x06 -#define UVC_CT_FOCUS_RELATIVE_CONTROL 0x07 -#define UVC_CT_FOCUS_AUTO_CONTROL 0x08 -#define UVC_CT_IRIS_ABSOLUTE_CONTROL 0x09 -#define UVC_CT_IRIS_RELATIVE_CONTROL 0x0a -#define UVC_CT_ZOOM_ABSOLUTE_CONTROL 0x0b -#define UVC_CT_ZOOM_RELATIVE_CONTROL 0x0c -#define UVC_CT_PANTILT_ABSOLUTE_CONTROL 0x0d -#define UVC_CT_PANTILT_RELATIVE_CONTROL 0x0e -#define UVC_CT_ROLL_ABSOLUTE_CONTROL 0x0f -#define UVC_CT_ROLL_RELATIVE_CONTROL 0x10 -#define UVC_CT_PRIVACY_CONTROL 0x11 - -/* A.9.5. Processing Unit Control Selectors */ -#define UVC_PU_CONTROL_UNDEFINED 0x00 -#define UVC_PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 -#define UVC_PU_BRIGHTNESS_CONTROL 0x02 -#define UVC_PU_CONTRAST_CONTROL 0x03 -#define UVC_PU_GAIN_CONTROL 0x04 -#define UVC_PU_POWER_LINE_FREQUENCY_CONTROL 0x05 -#define UVC_PU_HUE_CONTROL 0x06 -#define UVC_PU_SATURATION_CONTROL 0x07 -#define UVC_PU_SHARPNESS_CONTROL 0x08 -#define UVC_PU_GAMMA_CONTROL 0x09 -#define UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a -#define UVC_PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b -#define UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c -#define UVC_PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d -#define UVC_PU_DIGITAL_MULTIPLIER_CONTROL 0x0e -#define UVC_PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f -#define UVC_PU_HUE_AUTO_CONTROL 0x10 -#define UVC_PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 -#define UVC_PU_ANALOG_LOCK_STATUS_CONTROL 0x12 - -/* A.9.7. VideoStreaming Interface Control Selectors */ -#define UVC_VS_CONTROL_UNDEFINED 0x00 -#define UVC_VS_PROBE_CONTROL 0x01 -#define UVC_VS_COMMIT_CONTROL 0x02 -#define UVC_VS_STILL_PROBE_CONTROL 0x03 -#define UVC_VS_STILL_COMMIT_CONTROL 0x04 -#define UVC_VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 -#define UVC_VS_STREAM_ERROR_CODE_CONTROL 0x06 -#define UVC_VS_GENERATE_KEY_FRAME_CONTROL 0x07 -#define UVC_VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 -#define UVC_VS_SYNC_DELAY_CONTROL 0x09 - -/* B.1. USB Terminal Types */ -#define UVC_TT_VENDOR_SPECIFIC 0x0100 -#define UVC_TT_STREAMING 0x0101 - -/* B.2. Input Terminal Types */ -#define UVC_ITT_VENDOR_SPECIFIC 0x0200 -#define UVC_ITT_CAMERA 0x0201 -#define UVC_ITT_MEDIA_TRANSPORT_INPUT 0x0202 - -/* B.3. Output Terminal Types */ -#define UVC_OTT_VENDOR_SPECIFIC 0x0300 -#define UVC_OTT_DISPLAY 0x0301 -#define UVC_OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 - -/* B.4. External Terminal Types */ -#define UVC_EXTERNAL_VENDOR_SPECIFIC 0x0400 -#define UVC_COMPOSITE_CONNECTOR 0x0401 -#define UVC_SVIDEO_CONNECTOR 0x0402 -#define UVC_COMPONENT_CONNECTOR 0x0403 - -/* 2.4.2.2. Status Packet Type */ -#define UVC_STATUS_TYPE_CONTROL 1 -#define UVC_STATUS_TYPE_STREAMING 2 - -/* 2.4.3.3. Payload Header Information */ -#define UVC_STREAM_EOH (1 << 7) -#define UVC_STREAM_ERR (1 << 6) -#define UVC_STREAM_STI (1 << 5) -#define UVC_STREAM_RES (1 << 4) -#define UVC_STREAM_SCR (1 << 3) -#define UVC_STREAM_PTS (1 << 2) -#define UVC_STREAM_EOF (1 << 1) -#define UVC_STREAM_FID (1 << 0) - -/* 4.1.2. Control Capabilities */ -#define UVC_CONTROL_CAP_GET (1 << 0) -#define UVC_CONTROL_CAP_SET (1 << 1) -#define UVC_CONTROL_CAP_DISABLED (1 << 2) -#define UVC_CONTROL_CAP_AUTOUPDATE (1 << 3) -#define UVC_CONTROL_CAP_ASYNCHRONOUS (1 << 4) - -/* ------------------------------------------------------------------------ - * UVC structures - */ - -/* All UVC descriptors have these 3 fields at the beginning */ -struct uvc_descriptor_header { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; -} __attribute__((packed)); - -/* 3.7.2. Video Control Interface Header Descriptor */ -struct uvc_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u16 bcdUVC; - __u16 wTotalLength; - __u32 dwClockFrequency; - __u8 bInCollection; - __u8 baInterfaceNr[]; -} __attribute__((__packed__)); - -#define UVC_DT_HEADER_SIZE(n) (12+(n)) - -#define UVC_HEADER_DESCRIPTOR(n) \ - uvc_header_descriptor_##n - -#define DECLARE_UVC_HEADER_DESCRIPTOR(n) \ -struct UVC_HEADER_DESCRIPTOR(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u16 bcdUVC; \ - __u16 wTotalLength; \ - __u32 dwClockFrequency; \ - __u8 bInCollection; \ - __u8 baInterfaceNr[n]; \ -} __attribute__ ((packed)) - -/* 3.7.2.1. Input Terminal Descriptor */ -struct uvc_input_terminal_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bTerminalID; - __u16 wTerminalType; - __u8 bAssocTerminal; - __u8 iTerminal; -} __attribute__((__packed__)); - -#define UVC_DT_INPUT_TERMINAL_SIZE 8 - -/* 3.7.2.2. Output Terminal Descriptor */ -struct uvc_output_terminal_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bTerminalID; - __u16 wTerminalType; - __u8 bAssocTerminal; - __u8 bSourceID; - __u8 iTerminal; -} __attribute__((__packed__)); - -#define UVC_DT_OUTPUT_TERMINAL_SIZE 9 - -/* 3.7.2.3. Camera Terminal Descriptor */ -struct uvc_camera_terminal_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bTerminalID; - __u16 wTerminalType; - __u8 bAssocTerminal; - __u8 iTerminal; - __u16 wObjectiveFocalLengthMin; - __u16 wObjectiveFocalLengthMax; - __u16 wOcularFocalLength; - __u8 bControlSize; - __u8 bmControls[3]; -} __attribute__((__packed__)); - -#define UVC_DT_CAMERA_TERMINAL_SIZE(n) (15+(n)) - -/* 3.7.2.4. Selector Unit Descriptor */ -struct uvc_selector_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bUnitID; - __u8 bNrInPins; - __u8 baSourceID[0]; - __u8 iSelector; -} __attribute__((__packed__)); - -#define UVC_DT_SELECTOR_UNIT_SIZE(n) (6+(n)) - -#define UVC_SELECTOR_UNIT_DESCRIPTOR(n) \ - uvc_selector_unit_descriptor_##n - -#define DECLARE_UVC_SELECTOR_UNIT_DESCRIPTOR(n) \ -struct UVC_SELECTOR_UNIT_DESCRIPTOR(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bUnitID; \ - __u8 bNrInPins; \ - __u8 baSourceID[n]; \ - __u8 iSelector; \ -} __attribute__ ((packed)) - -/* 3.7.2.5. Processing Unit Descriptor */ -struct uvc_processing_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bUnitID; - __u8 bSourceID; - __u16 wMaxMultiplier; - __u8 bControlSize; - __u8 bmControls[2]; - __u8 iProcessing; -} __attribute__((__packed__)); - -#define UVC_DT_PROCESSING_UNIT_SIZE(n) (9+(n)) - -/* 3.7.2.6. Extension Unit Descriptor */ -struct uvc_extension_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bUnitID; - __u8 guidExtensionCode[16]; - __u8 bNumControls; - __u8 bNrInPins; - __u8 baSourceID[0]; - __u8 bControlSize; - __u8 bmControls[0]; - __u8 iExtension; -} __attribute__((__packed__)); - -#define UVC_DT_EXTENSION_UNIT_SIZE(p, n) (24+(p)+(n)) - -#define UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \ - uvc_extension_unit_descriptor_##p_##n - -#define DECLARE_UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \ -struct UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bUnitID; \ - __u8 guidExtensionCode[16]; \ - __u8 bNumControls; \ - __u8 bNrInPins; \ - __u8 baSourceID[p]; \ - __u8 bControlSize; \ - __u8 bmControls[n]; \ - __u8 iExtension; \ -} __attribute__ ((packed)) - -/* 3.8.2.2. Video Control Interrupt Endpoint Descriptor */ -struct uvc_control_endpoint_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u16 wMaxTransferSize; -} __attribute__((__packed__)); - -#define UVC_DT_CONTROL_ENDPOINT_SIZE 5 - -/* 3.9.2.1. Input Header Descriptor */ -struct uvc_input_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bNumFormats; - __u16 wTotalLength; - __u8 bEndpointAddress; - __u8 bmInfo; - __u8 bTerminalLink; - __u8 bStillCaptureMethod; - __u8 bTriggerSupport; - __u8 bTriggerUsage; - __u8 bControlSize; - __u8 bmaControls[]; -} __attribute__((__packed__)); - -#define UVC_DT_INPUT_HEADER_SIZE(n, p) (13+(n*p)) - -#define UVC_INPUT_HEADER_DESCRIPTOR(n, p) \ - uvc_input_header_descriptor_##n_##p - -#define DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(n, p) \ -struct UVC_INPUT_HEADER_DESCRIPTOR(n, p) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bNumFormats; \ - __u16 wTotalLength; \ - __u8 bEndpointAddress; \ - __u8 bmInfo; \ - __u8 bTerminalLink; \ - __u8 bStillCaptureMethod; \ - __u8 bTriggerSupport; \ - __u8 bTriggerUsage; \ - __u8 bControlSize; \ - __u8 bmaControls[p][n]; \ -} __attribute__ ((packed)) - -/* 3.9.2.2. Output Header Descriptor */ -struct uvc_output_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bNumFormats; - __u16 wTotalLength; - __u8 bEndpointAddress; - __u8 bTerminalLink; - __u8 bControlSize; - __u8 bmaControls[]; -} __attribute__((__packed__)); - -#define UVC_DT_OUTPUT_HEADER_SIZE(n, p) (9+(n*p)) - -#define UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \ - uvc_output_header_descriptor_##n_##p - -#define DECLARE_UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \ -struct UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bNumFormats; \ - __u16 wTotalLength; \ - __u8 bEndpointAddress; \ - __u8 bTerminalLink; \ - __u8 bControlSize; \ - __u8 bmaControls[p][n]; \ -} __attribute__ ((packed)) - -/* 3.9.2.6. Color matching descriptor */ -struct uvc_color_matching_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bColorPrimaries; - __u8 bTransferCharacteristics; - __u8 bMatrixCoefficients; -} __attribute__((__packed__)); - -#define UVC_DT_COLOR_MATCHING_SIZE 6 - -/* 4.3.1.1. Video Probe and Commit Controls */ -struct uvc_streaming_control { - __u16 bmHint; - __u8 bFormatIndex; - __u8 bFrameIndex; - __u32 dwFrameInterval; - __u16 wKeyFrameRate; - __u16 wPFrameRate; - __u16 wCompQuality; - __u16 wCompWindowSize; - __u16 wDelay; - __u32 dwMaxVideoFrameSize; - __u32 dwMaxPayloadTransferSize; - __u32 dwClockFrequency; - __u8 bmFramingInfo; - __u8 bPreferedVersion; - __u8 bMinVersion; - __u8 bMaxVersion; -} __attribute__((__packed__)); - -/* Uncompressed Payload - 3.1.1. Uncompressed Video Format Descriptor */ -struct uvc_format_uncompressed { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFormatIndex; - __u8 bNumFrameDescriptors; - __u8 guidFormat[16]; - __u8 bBitsPerPixel; - __u8 bDefaultFrameIndex; - __u8 bAspectRatioX; - __u8 bAspectRatioY; - __u8 bmInterfaceFlags; - __u8 bCopyProtect; -} __attribute__((__packed__)); - -#define UVC_DT_FORMAT_UNCOMPRESSED_SIZE 27 - -/* Uncompressed Payload - 3.1.2. Uncompressed Video Frame Descriptor */ -struct uvc_frame_uncompressed { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFrameIndex; - __u8 bmCapabilities; - __u16 wWidth; - __u16 wHeight; - __u32 dwMinBitRate; - __u32 dwMaxBitRate; - __u32 dwMaxVideoFrameBufferSize; - __u32 dwDefaultFrameInterval; - __u8 bFrameIntervalType; - __u32 dwFrameInterval[]; -} __attribute__((__packed__)); - -#define UVC_DT_FRAME_UNCOMPRESSED_SIZE(n) (26+4*(n)) - -#define UVC_FRAME_UNCOMPRESSED(n) \ - uvc_frame_uncompressed_##n - -#define DECLARE_UVC_FRAME_UNCOMPRESSED(n) \ -struct UVC_FRAME_UNCOMPRESSED(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bFrameIndex; \ - __u8 bmCapabilities; \ - __u16 wWidth; \ - __u16 wHeight; \ - __u32 dwMinBitRate; \ - __u32 dwMaxBitRate; \ - __u32 dwMaxVideoFrameBufferSize; \ - __u32 dwDefaultFrameInterval; \ - __u8 bFrameIntervalType; \ - __u32 dwFrameInterval[n]; \ -} __attribute__ ((packed)) - -/* MJPEG Payload - 3.1.1. MJPEG Video Format Descriptor */ -struct uvc_format_mjpeg { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFormatIndex; - __u8 bNumFrameDescriptors; - __u8 bmFlags; - __u8 bDefaultFrameIndex; - __u8 bAspectRatioX; - __u8 bAspectRatioY; - __u8 bmInterfaceFlags; - __u8 bCopyProtect; -} __attribute__((__packed__)); - -#define UVC_DT_FORMAT_MJPEG_SIZE 11 - -/* MJPEG Payload - 3.1.2. MJPEG Video Frame Descriptor */ -struct uvc_frame_mjpeg { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFrameIndex; - __u8 bmCapabilities; - __u16 wWidth; - __u16 wHeight; - __u32 dwMinBitRate; - __u32 dwMaxBitRate; - __u32 dwMaxVideoFrameBufferSize; - __u32 dwDefaultFrameInterval; - __u8 bFrameIntervalType; - __u32 dwFrameInterval[]; -} __attribute__((__packed__)); - -#define UVC_DT_FRAME_MJPEG_SIZE(n) (26+4*(n)) - -#define UVC_FRAME_MJPEG(n) \ - uvc_frame_mjpeg_##n - -#define DECLARE_UVC_FRAME_MJPEG(n) \ -struct UVC_FRAME_MJPEG(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bFrameIndex; \ - __u8 bmCapabilities; \ - __u16 wWidth; \ - __u16 wHeight; \ - __u32 dwMinBitRate; \ - __u32 dwMaxBitRate; \ - __u32 dwMaxVideoFrameBufferSize; \ - __u32 dwDefaultFrameInterval; \ - __u8 bFrameIntervalType; \ - __u32 dwFrameInterval[n]; \ -} __attribute__ ((packed)) - -#endif /* __LINUX_USB_VIDEO_H */ - diff --git a/include/uapi/linux/usb/Kbuild b/include/uapi/linux/usb/Kbuild index aafaa5aa54d..6cb4ea82683 100644 --- a/include/uapi/linux/usb/Kbuild +++ b/include/uapi/linux/usb/Kbuild @@ -1 +1,11 @@ # UAPI Header export list +header-y += audio.h +header-y += cdc.h +header-y += ch11.h +header-y += ch9.h +header-y += functionfs.h +header-y += g_printer.h +header-y += gadgetfs.h +header-y += midi.h +header-y += tmc.h +header-y += video.h diff --git a/include/uapi/linux/usb/audio.h b/include/uapi/linux/usb/audio.h new file mode 100644 index 00000000000..ac90037894d --- /dev/null +++ b/include/uapi/linux/usb/audio.h @@ -0,0 +1,545 @@ +/* + * -- USB Audio definitions. + * + * Copyright (C) 2006 Thumtronics Pty Ltd. + * Developed for Thumtronics by Grey Innovation + * Ben Williamson + * + * This software is distributed under the terms of the GNU General Public + * License ("GPL") version 2, as published by the Free Software Foundation. + * + * This file holds USB constants and structures defined + * by the USB Device Class Definition for Audio Devices. + * Comments below reference relevant sections of that document: + * + * http://www.usb.org/developers/devclass_docs/audio10.pdf + * + * Types and defines in this file are either specific to version 1.0 of + * this standard or common for newer versions. + */ + +#ifndef _UAPI__LINUX_USB_AUDIO_H +#define _UAPI__LINUX_USB_AUDIO_H + +#include + +/* bInterfaceProtocol values to denote the version of the standard used */ +#define UAC_VERSION_1 0x00 +#define UAC_VERSION_2 0x20 + +/* A.2 Audio Interface Subclass Codes */ +#define USB_SUBCLASS_AUDIOCONTROL 0x01 +#define USB_SUBCLASS_AUDIOSTREAMING 0x02 +#define USB_SUBCLASS_MIDISTREAMING 0x03 + +/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */ +#define UAC_HEADER 0x01 +#define UAC_INPUT_TERMINAL 0x02 +#define UAC_OUTPUT_TERMINAL 0x03 +#define UAC_MIXER_UNIT 0x04 +#define UAC_SELECTOR_UNIT 0x05 +#define UAC_FEATURE_UNIT 0x06 +#define UAC1_PROCESSING_UNIT 0x07 +#define UAC1_EXTENSION_UNIT 0x08 + +/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */ +#define UAC_AS_GENERAL 0x01 +#define UAC_FORMAT_TYPE 0x02 +#define UAC_FORMAT_SPECIFIC 0x03 + +/* A.7 Processing Unit Process Types */ +#define UAC_PROCESS_UNDEFINED 0x00 +#define UAC_PROCESS_UP_DOWNMIX 0x01 +#define UAC_PROCESS_DOLBY_PROLOGIC 0x02 +#define UAC_PROCESS_STEREO_EXTENDER 0x03 +#define UAC_PROCESS_REVERB 0x04 +#define UAC_PROCESS_CHORUS 0x05 +#define UAC_PROCESS_DYN_RANGE_COMP 0x06 + +/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */ +#define UAC_EP_GENERAL 0x01 + +/* A.9 Audio Class-Specific Request Codes */ +#define UAC_SET_ 0x00 +#define UAC_GET_ 0x80 + +#define UAC__CUR 0x1 +#define UAC__MIN 0x2 +#define UAC__MAX 0x3 +#define UAC__RES 0x4 +#define UAC__MEM 0x5 + +#define UAC_SET_CUR (UAC_SET_ | UAC__CUR) +#define UAC_GET_CUR (UAC_GET_ | UAC__CUR) +#define UAC_SET_MIN (UAC_SET_ | UAC__MIN) +#define UAC_GET_MIN (UAC_GET_ | UAC__MIN) +#define UAC_SET_MAX (UAC_SET_ | UAC__MAX) +#define UAC_GET_MAX (UAC_GET_ | UAC__MAX) +#define UAC_SET_RES (UAC_SET_ | UAC__RES) +#define UAC_GET_RES (UAC_GET_ | UAC__RES) +#define UAC_SET_MEM (UAC_SET_ | UAC__MEM) +#define UAC_GET_MEM (UAC_GET_ | UAC__MEM) + +#define UAC_GET_STAT 0xff + +/* A.10 Control Selector Codes */ + +/* A.10.1 Terminal Control Selectors */ +#define UAC_TERM_COPY_PROTECT 0x01 + +/* A.10.2 Feature Unit Control Selectors */ +#define UAC_FU_MUTE 0x01 +#define UAC_FU_VOLUME 0x02 +#define UAC_FU_BASS 0x03 +#define UAC_FU_MID 0x04 +#define UAC_FU_TREBLE 0x05 +#define UAC_FU_GRAPHIC_EQUALIZER 0x06 +#define UAC_FU_AUTOMATIC_GAIN 0x07 +#define UAC_FU_DELAY 0x08 +#define UAC_FU_BASS_BOOST 0x09 +#define UAC_FU_LOUDNESS 0x0a + +#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1)) + +/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */ +#define UAC_UD_ENABLE 0x01 +#define UAC_UD_MODE_SELECT 0x02 + +/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */ +#define UAC_DP_ENABLE 0x01 +#define UAC_DP_MODE_SELECT 0x02 + +/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */ +#define UAC_3D_ENABLE 0x01 +#define UAC_3D_SPACE 0x02 + +/* A.10.3.4 Reverberation Processing Unit Control Selectors */ +#define UAC_REVERB_ENABLE 0x01 +#define UAC_REVERB_LEVEL 0x02 +#define UAC_REVERB_TIME 0x03 +#define UAC_REVERB_FEEDBACK 0x04 + +/* A.10.3.5 Chorus Processing Unit Control Selectors */ +#define UAC_CHORUS_ENABLE 0x01 +#define UAC_CHORUS_LEVEL 0x02 +#define UAC_CHORUS_RATE 0x03 +#define UAC_CHORUS_DEPTH 0x04 + +/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */ +#define UAC_DCR_ENABLE 0x01 +#define UAC_DCR_RATE 0x02 +#define UAC_DCR_MAXAMPL 0x03 +#define UAC_DCR_THRESHOLD 0x04 +#define UAC_DCR_ATTACK_TIME 0x05 +#define UAC_DCR_RELEASE_TIME 0x06 + +/* A.10.4 Extension Unit Control Selectors */ +#define UAC_XU_ENABLE 0x01 + +/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */ +#define UAC_MS_HEADER 0x01 +#define UAC_MIDI_IN_JACK 0x02 +#define UAC_MIDI_OUT_JACK 0x03 + +/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */ +#define UAC_MS_GENERAL 0x01 + +/* Terminals - 2.1 USB Terminal Types */ +#define UAC_TERMINAL_UNDEFINED 0x100 +#define UAC_TERMINAL_STREAMING 0x101 +#define UAC_TERMINAL_VENDOR_SPEC 0x1FF + +/* Terminal Control Selectors */ +/* 4.3.2 Class-Specific AC Interface Descriptor */ +struct uac1_ac_header_descriptor { + __u8 bLength; /* 8 + n */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* UAC_MS_HEADER */ + __le16 bcdADC; /* 0x0100 */ + __le16 wTotalLength; /* includes Unit and Terminal desc. */ + __u8 bInCollection; /* n */ + __u8 baInterfaceNr[]; /* [n] */ +} __attribute__ ((packed)); + +#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n)) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \ +struct uac1_ac_header_descriptor_##n { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __le16 bcdADC; \ + __le16 wTotalLength; \ + __u8 bInCollection; \ + __u8 baInterfaceNr[n]; \ +} __attribute__ ((packed)) + +/* 4.3.2.1 Input Terminal Descriptor */ +struct uac_input_terminal_descriptor { + __u8 bLength; /* in bytes: 12 */ + __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ + __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */ + __u8 bTerminalID; /* Constant uniquely terminal ID */ + __le16 wTerminalType; /* USB Audio Terminal Types */ + __u8 bAssocTerminal; /* ID of the Output Terminal associated */ + __u8 bNrChannels; /* Number of logical output channels */ + __le16 wChannelConfig; + __u8 iChannelNames; + __u8 iTerminal; +} __attribute__ ((packed)); + +#define UAC_DT_INPUT_TERMINAL_SIZE 12 + +/* Terminals - 2.2 Input Terminal Types */ +#define UAC_INPUT_TERMINAL_UNDEFINED 0x200 +#define UAC_INPUT_TERMINAL_MICROPHONE 0x201 +#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202 +#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203 +#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204 +#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 +#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 + +/* Terminals - control selectors */ + +#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01 + +/* 4.3.2.2 Output Terminal Descriptor */ +struct uac1_output_terminal_descriptor { + __u8 bLength; /* in bytes: 9 */ + __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ + __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */ + __u8 bTerminalID; /* Constant uniquely terminal ID */ + __le16 wTerminalType; /* USB Audio Terminal Types */ + __u8 bAssocTerminal; /* ID of the Input Terminal associated */ + __u8 bSourceID; /* ID of the connected Unit or Terminal*/ + __u8 iTerminal; +} __attribute__ ((packed)); + +#define UAC_DT_OUTPUT_TERMINAL_SIZE 9 + +/* Terminals - 2.3 Output Terminal Types */ +#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300 +#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301 +#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302 +#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303 +#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304 +#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305 +#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306 +#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307 + +/* Set bControlSize = 2 as default setting */ +#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \ +struct uac_feature_unit_descriptor_##ch { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bUnitID; \ + __u8 bSourceID; \ + __u8 bControlSize; \ + __le16 bmaControls[ch + 1]; \ + __u8 iFeature; \ +} __attribute__ ((packed)) + +/* 4.3.2.3 Mixer Unit Descriptor */ +struct uac_mixer_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUnitID; + __u8 bNrInPins; + __u8 baSourceID[]; +} __attribute__ ((packed)); + +static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc) +{ + return desc->baSourceID[desc->bNrInPins]; +} + +static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc, + int protocol) +{ + if (protocol == UAC_VERSION_1) + return (desc->baSourceID[desc->bNrInPins + 2] << 8) | + desc->baSourceID[desc->bNrInPins + 1]; + else + return (desc->baSourceID[desc->bNrInPins + 4] << 24) | + (desc->baSourceID[desc->bNrInPins + 3] << 16) | + (desc->baSourceID[desc->bNrInPins + 2] << 8) | + (desc->baSourceID[desc->bNrInPins + 1]); +} + +static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + desc->baSourceID[desc->bNrInPins + 3] : + desc->baSourceID[desc->bNrInPins + 5]; +} + +static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + &desc->baSourceID[desc->bNrInPins + 4] : + &desc->baSourceID[desc->bNrInPins + 6]; +} + +static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc) +{ + __u8 *raw = (__u8 *) desc; + return raw[desc->bLength - 1]; +} + +/* 4.3.2.4 Selector Unit Descriptor */ +struct uac_selector_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUintID; + __u8 bNrInPins; + __u8 baSourceID[]; +} __attribute__ ((packed)); + +static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc) +{ + __u8 *raw = (__u8 *) desc; + return raw[desc->bLength - 1]; +} + +/* 4.3.2.5 Feature Unit Descriptor */ +struct uac_feature_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUnitID; + __u8 bSourceID; + __u8 bControlSize; + __u8 bmaControls[0]; /* variable length */ +} __attribute__((packed)); + +static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc) +{ + __u8 *raw = (__u8 *) desc; + return raw[desc->bLength - 1]; +} + +/* 4.3.2.6 Processing Unit Descriptors */ +struct uac_processing_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bUnitID; + __u16 wProcessType; + __u8 bNrInPins; + __u8 baSourceID[]; +} __attribute__ ((packed)); + +static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc) +{ + return desc->baSourceID[desc->bNrInPins]; +} + +static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + if (protocol == UAC_VERSION_1) + return (desc->baSourceID[desc->bNrInPins + 2] << 8) | + desc->baSourceID[desc->bNrInPins + 1]; + else + return (desc->baSourceID[desc->bNrInPins + 4] << 24) | + (desc->baSourceID[desc->bNrInPins + 3] << 16) | + (desc->baSourceID[desc->bNrInPins + 2] << 8) | + (desc->baSourceID[desc->bNrInPins + 1]); +} + +static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + desc->baSourceID[desc->bNrInPins + 3] : + desc->baSourceID[desc->bNrInPins + 5]; +} + +static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + desc->baSourceID[desc->bNrInPins + 4] : + desc->baSourceID[desc->bNrInPins + 6]; +} + +static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + return (protocol == UAC_VERSION_1) ? + &desc->baSourceID[desc->bNrInPins + 5] : + &desc->baSourceID[desc->bNrInPins + 7]; +} + +static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); + return desc->baSourceID[desc->bNrInPins + control_size]; +} + +static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); + return &desc->baSourceID[desc->bNrInPins + control_size + 1]; +} + +/* 4.5.2 Class-Specific AS Interface Descriptor */ +struct uac1_as_header_descriptor { + __u8 bLength; /* in bytes: 7 */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* AS_GENERAL */ + __u8 bTerminalLink; /* Terminal ID of connected Terminal */ + __u8 bDelay; /* Delay introduced by the data path */ + __le16 wFormatTag; /* The Audio Data Format */ +} __attribute__ ((packed)); + +#define UAC_DT_AS_HEADER_SIZE 7 + +/* Formats - A.1.1 Audio Data Format Type I Codes */ +#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0 +#define UAC_FORMAT_TYPE_I_PCM 0x1 +#define UAC_FORMAT_TYPE_I_PCM8 0x2 +#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3 +#define UAC_FORMAT_TYPE_I_ALAW 0x4 +#define UAC_FORMAT_TYPE_I_MULAW 0x5 + +struct uac_format_type_i_continuous_descriptor { + __u8 bLength; /* in bytes: 8 + (ns * 3) */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* FORMAT_TYPE */ + __u8 bFormatType; /* FORMAT_TYPE_1 */ + __u8 bNrChannels; /* physical channels in the stream */ + __u8 bSubframeSize; /* */ + __u8 bBitResolution; + __u8 bSamFreqType; + __u8 tLowerSamFreq[3]; + __u8 tUpperSamFreq[3]; +} __attribute__ ((packed)); + +#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14 + +struct uac_format_type_i_discrete_descriptor { + __u8 bLength; /* in bytes: 8 + (ns * 3) */ + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* FORMAT_TYPE */ + __u8 bFormatType; /* FORMAT_TYPE_1 */ + __u8 bNrChannels; /* physical channels in the stream */ + __u8 bSubframeSize; /* */ + __u8 bBitResolution; + __u8 bSamFreqType; + __u8 tSamFreq[][3]; +} __attribute__ ((packed)); + +#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \ +struct uac_format_type_i_discrete_descriptor_##n { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bFormatType; \ + __u8 bNrChannels; \ + __u8 bSubframeSize; \ + __u8 bBitResolution; \ + __u8 bSamFreqType; \ + __u8 tSamFreq[n][3]; \ +} __attribute__ ((packed)) + +#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) + +struct uac_format_type_i_ext_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bFormatType; + __u8 bSubslotSize; + __u8 bBitResolution; + __u8 bHeaderLength; + __u8 bControlSize; + __u8 bSideBandProtocol; +} __attribute__((packed)); + +/* Formats - Audio Data Format Type I Codes */ + +#define UAC_FORMAT_TYPE_II_MPEG 0x1001 +#define UAC_FORMAT_TYPE_II_AC3 0x1002 + +struct uac_format_type_ii_discrete_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bFormatType; + __le16 wMaxBitRate; + __le16 wSamplesPerFrame; + __u8 bSamFreqType; + __u8 tSamFreq[][3]; +} __attribute__((packed)); + +struct uac_format_type_ii_ext_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u8 bFormatType; + __u16 wMaxBitRate; + __u16 wSamplesPerFrame; + __u8 bHeaderLength; + __u8 bSideBandProtocol; +} __attribute__((packed)); + +/* type III */ +#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005 +#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006 + +/* Formats - A.2 Format Type Codes */ +#define UAC_FORMAT_TYPE_UNDEFINED 0x0 +#define UAC_FORMAT_TYPE_I 0x1 +#define UAC_FORMAT_TYPE_II 0x2 +#define UAC_FORMAT_TYPE_III 0x3 +#define UAC_EXT_FORMAT_TYPE_I 0x81 +#define UAC_EXT_FORMAT_TYPE_II 0x82 +#define UAC_EXT_FORMAT_TYPE_III 0x83 + +struct uac_iso_endpoint_descriptor { + __u8 bLength; /* in bytes: 7 */ + __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ + __u8 bDescriptorSubtype; /* EP_GENERAL */ + __u8 bmAttributes; + __u8 bLockDelayUnits; + __le16 wLockDelay; +} __attribute__((packed)); +#define UAC_ISO_ENDPOINT_DESC_SIZE 7 + +#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01 +#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02 +#define UAC_EP_CS_ATTR_FILL_MAX 0x80 + +/* status word format (3.7.1.1) */ + +#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f +#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF 0x0 +#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF 0x1 +#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP 0x2 + +#define UAC1_STATUS_TYPE_IRQ_PENDING (1 << 7) +#define UAC1_STATUS_TYPE_MEM_CHANGED (1 << 6) + +struct uac1_status_word { + __u8 bStatusType; + __u8 bOriginator; +} __attribute__((packed)); + + +#endif /* _UAPI__LINUX_USB_AUDIO_H */ diff --git a/include/uapi/linux/usb/cdc.h b/include/uapi/linux/usb/cdc.h new file mode 100644 index 00000000000..81a927930bf --- /dev/null +++ b/include/uapi/linux/usb/cdc.h @@ -0,0 +1,412 @@ +/* + * USB Communications Device Class (CDC) definitions + * + * CDC says how to talk to lots of different types of network adapters, + * notably ethernet adapters and various modems. It's used mostly with + * firmware based USB peripherals. + */ + +#ifndef __LINUX_USB_CDC_H +#define __LINUX_USB_CDC_H + +#include + +#define USB_CDC_SUBCLASS_ACM 0x02 +#define USB_CDC_SUBCLASS_ETHERNET 0x06 +#define USB_CDC_SUBCLASS_WHCM 0x08 +#define USB_CDC_SUBCLASS_DMM 0x09 +#define USB_CDC_SUBCLASS_MDLM 0x0a +#define USB_CDC_SUBCLASS_OBEX 0x0b +#define USB_CDC_SUBCLASS_EEM 0x0c +#define USB_CDC_SUBCLASS_NCM 0x0d + +#define USB_CDC_PROTO_NONE 0 + +#define USB_CDC_ACM_PROTO_AT_V25TER 1 +#define USB_CDC_ACM_PROTO_AT_PCCA101 2 +#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE 3 +#define USB_CDC_ACM_PROTO_AT_GSM 4 +#define USB_CDC_ACM_PROTO_AT_3G 5 +#define USB_CDC_ACM_PROTO_AT_CDMA 6 +#define USB_CDC_ACM_PROTO_VENDOR 0xff + +#define USB_CDC_PROTO_EEM 7 + +#define USB_CDC_NCM_PROTO_NTB 1 + +/*-------------------------------------------------------------------------*/ + +/* + * Class-Specific descriptors ... there are a couple dozen of them + */ + +#define USB_CDC_HEADER_TYPE 0x00 /* header_desc */ +#define USB_CDC_CALL_MANAGEMENT_TYPE 0x01 /* call_mgmt_descriptor */ +#define USB_CDC_ACM_TYPE 0x02 /* acm_descriptor */ +#define USB_CDC_UNION_TYPE 0x06 /* union_desc */ +#define USB_CDC_COUNTRY_TYPE 0x07 +#define USB_CDC_NETWORK_TERMINAL_TYPE 0x0a /* network_terminal_desc */ +#define USB_CDC_ETHERNET_TYPE 0x0f /* ether_desc */ +#define USB_CDC_WHCM_TYPE 0x11 +#define USB_CDC_MDLM_TYPE 0x12 /* mdlm_desc */ +#define USB_CDC_MDLM_DETAIL_TYPE 0x13 /* mdlm_detail_desc */ +#define USB_CDC_DMM_TYPE 0x14 +#define USB_CDC_OBEX_TYPE 0x15 +#define USB_CDC_NCM_TYPE 0x1a + +/* "Header Functional Descriptor" from CDC spec 5.2.3.1 */ +struct usb_cdc_header_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdCDC; +} __attribute__ ((packed)); + +/* "Call Management Descriptor" from CDC spec 5.2.3.2 */ +struct usb_cdc_call_mgmt_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bmCapabilities; +#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT 0x01 +#define USB_CDC_CALL_MGMT_CAP_DATA_INTF 0x02 + + __u8 bDataInterface; +} __attribute__ ((packed)); + +/* "Abstract Control Management Descriptor" from CDC spec 5.2.3.3 */ +struct usb_cdc_acm_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bmCapabilities; +} __attribute__ ((packed)); + +/* capabilities from 5.2.3.3 */ + +#define USB_CDC_COMM_FEATURE 0x01 +#define USB_CDC_CAP_LINE 0x02 +#define USB_CDC_CAP_BRK 0x04 +#define USB_CDC_CAP_NOTIFY 0x08 + +/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */ +struct usb_cdc_union_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bMasterInterface0; + __u8 bSlaveInterface0; + /* ... and there could be other slave interfaces */ +} __attribute__ ((packed)); + +/* "Country Selection Functional Descriptor" from CDC spec 5.2.3.9 */ +struct usb_cdc_country_functional_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 iCountryCodeRelDate; + __le16 wCountyCode0; + /* ... and there can be a lot of country codes */ +} __attribute__ ((packed)); + +/* "Network Channel Terminal Functional Descriptor" from CDC spec 5.2.3.11 */ +struct usb_cdc_network_terminal_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bEntityId; + __u8 iName; + __u8 bChannelIndex; + __u8 bPhysicalInterface; +} __attribute__ ((packed)); + +/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */ +struct usb_cdc_ether_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 iMACAddress; + __le32 bmEthernetStatistics; + __le16 wMaxSegmentSize; + __le16 wNumberMCFilters; + __u8 bNumberPowerFilters; +} __attribute__ ((packed)); + +/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */ +struct usb_cdc_dmm_desc { + __u8 bFunctionLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u16 bcdVersion; + __le16 wMaxCommand; +} __attribute__ ((packed)); + +/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */ +struct usb_cdc_mdlm_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdVersion; + __u8 bGUID[16]; +} __attribute__ ((packed)); + +/* "MDLM Detail Functional Descriptor" from CDC WMC spec 6.7.2.4 */ +struct usb_cdc_mdlm_detail_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + /* type is associated with mdlm_desc.bGUID */ + __u8 bGuidDescriptorType; + __u8 bDetailData[0]; +} __attribute__ ((packed)); + +/* "OBEX Control Model Functional Descriptor" */ +struct usb_cdc_obex_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdVersion; +} __attribute__ ((packed)); + +/* "NCM Control Model Functional Descriptor" */ +struct usb_cdc_ncm_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdNcmVersion; + __u8 bmNetworkCapabilities; +} __attribute__ ((packed)); +/*-------------------------------------------------------------------------*/ + +/* + * Class-Specific Control Requests (6.2) + * + * section 3.6.2.1 table 4 has the ACM profile, for modems. + * section 3.8.2 table 10 has the ethernet profile. + * + * Microsoft's RNDIS stack for Ethernet is a vendor-specific CDC ACM variant, + * heavily dependent on the encapsulated (proprietary) command mechanism. + */ + +#define USB_CDC_SEND_ENCAPSULATED_COMMAND 0x00 +#define USB_CDC_GET_ENCAPSULATED_RESPONSE 0x01 +#define USB_CDC_REQ_SET_LINE_CODING 0x20 +#define USB_CDC_REQ_GET_LINE_CODING 0x21 +#define USB_CDC_REQ_SET_CONTROL_LINE_STATE 0x22 +#define USB_CDC_REQ_SEND_BREAK 0x23 +#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40 +#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER 0x41 +#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER 0x42 +#define USB_CDC_SET_ETHERNET_PACKET_FILTER 0x43 +#define USB_CDC_GET_ETHERNET_STATISTIC 0x44 +#define USB_CDC_GET_NTB_PARAMETERS 0x80 +#define USB_CDC_GET_NET_ADDRESS 0x81 +#define USB_CDC_SET_NET_ADDRESS 0x82 +#define USB_CDC_GET_NTB_FORMAT 0x83 +#define USB_CDC_SET_NTB_FORMAT 0x84 +#define USB_CDC_GET_NTB_INPUT_SIZE 0x85 +#define USB_CDC_SET_NTB_INPUT_SIZE 0x86 +#define USB_CDC_GET_MAX_DATAGRAM_SIZE 0x87 +#define USB_CDC_SET_MAX_DATAGRAM_SIZE 0x88 +#define USB_CDC_GET_CRC_MODE 0x89 +#define USB_CDC_SET_CRC_MODE 0x8a + +/* Line Coding Structure from CDC spec 6.2.13 */ +struct usb_cdc_line_coding { + __le32 dwDTERate; + __u8 bCharFormat; +#define USB_CDC_1_STOP_BITS 0 +#define USB_CDC_1_5_STOP_BITS 1 +#define USB_CDC_2_STOP_BITS 2 + + __u8 bParityType; +#define USB_CDC_NO_PARITY 0 +#define USB_CDC_ODD_PARITY 1 +#define USB_CDC_EVEN_PARITY 2 +#define USB_CDC_MARK_PARITY 3 +#define USB_CDC_SPACE_PARITY 4 + + __u8 bDataBits; +} __attribute__ ((packed)); + +/* table 62; bits in multicast filter */ +#define USB_CDC_PACKET_TYPE_PROMISCUOUS (1 << 0) +#define USB_CDC_PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */ +#define USB_CDC_PACKET_TYPE_DIRECTED (1 << 2) +#define USB_CDC_PACKET_TYPE_BROADCAST (1 << 3) +#define USB_CDC_PACKET_TYPE_MULTICAST (1 << 4) /* filtered */ + + +/*-------------------------------------------------------------------------*/ + +/* + * Class-Specific Notifications (6.3) sent by interrupt transfers + * + * section 3.8.2 table 11 of the CDC spec lists Ethernet notifications + * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS + * RNDIS also defines its own bit-incompatible notifications + */ + +#define USB_CDC_NOTIFY_NETWORK_CONNECTION 0x00 +#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE 0x01 +#define USB_CDC_NOTIFY_SERIAL_STATE 0x20 +#define USB_CDC_NOTIFY_SPEED_CHANGE 0x2a + +struct usb_cdc_notification { + __u8 bmRequestType; + __u8 bNotificationType; + __le16 wValue; + __le16 wIndex; + __le16 wLength; +} __attribute__ ((packed)); + +struct usb_cdc_speed_change { + __le32 DLBitRRate; /* contains the downlink bit rate (IN pipe) */ + __le32 ULBitRate; /* contains the uplink bit rate (OUT pipe) */ +} __attribute__ ((packed)); + +/*-------------------------------------------------------------------------*/ + +/* + * Class Specific structures and constants + * + * CDC NCM NTB parameters structure, CDC NCM subclass 6.2.1 + * + */ + +struct usb_cdc_ncm_ntb_parameters { + __le16 wLength; + __le16 bmNtbFormatsSupported; + __le32 dwNtbInMaxSize; + __le16 wNdpInDivisor; + __le16 wNdpInPayloadRemainder; + __le16 wNdpInAlignment; + __le16 wPadding1; + __le32 dwNtbOutMaxSize; + __le16 wNdpOutDivisor; + __le16 wNdpOutPayloadRemainder; + __le16 wNdpOutAlignment; + __le16 wNtbOutMaxDatagrams; +} __attribute__ ((packed)); + +/* + * CDC NCM transfer headers, CDC NCM subclass 3.2 + */ + +#define USB_CDC_NCM_NTH16_SIGN 0x484D434E /* NCMH */ +#define USB_CDC_NCM_NTH32_SIGN 0x686D636E /* ncmh */ + +struct usb_cdc_ncm_nth16 { + __le32 dwSignature; + __le16 wHeaderLength; + __le16 wSequence; + __le16 wBlockLength; + __le16 wNdpIndex; +} __attribute__ ((packed)); + +struct usb_cdc_ncm_nth32 { + __le32 dwSignature; + __le16 wHeaderLength; + __le16 wSequence; + __le32 dwBlockLength; + __le32 dwNdpIndex; +} __attribute__ ((packed)); + +/* + * CDC NCM datagram pointers, CDC NCM subclass 3.3 + */ + +#define USB_CDC_NCM_NDP16_CRC_SIGN 0x314D434E /* NCM1 */ +#define USB_CDC_NCM_NDP16_NOCRC_SIGN 0x304D434E /* NCM0 */ +#define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */ +#define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */ + +/* 16-bit NCM Datagram Pointer Entry */ +struct usb_cdc_ncm_dpe16 { + __le16 wDatagramIndex; + __le16 wDatagramLength; +} __attribute__((__packed__)); + +/* 16-bit NCM Datagram Pointer Table */ +struct usb_cdc_ncm_ndp16 { + __le32 dwSignature; + __le16 wLength; + __le16 wNextNdpIndex; + struct usb_cdc_ncm_dpe16 dpe16[0]; +} __attribute__ ((packed)); + +/* 32-bit NCM Datagram Pointer Entry */ +struct usb_cdc_ncm_dpe32 { + __le32 dwDatagramIndex; + __le32 dwDatagramLength; +} __attribute__((__packed__)); + +/* 32-bit NCM Datagram Pointer Table */ +struct usb_cdc_ncm_ndp32 { + __le32 dwSignature; + __le16 wLength; + __le16 wReserved6; + __le32 dwNextNdpIndex; + __le32 dwReserved12; + struct usb_cdc_ncm_dpe32 dpe32[0]; +} __attribute__ ((packed)); + +/* CDC NCM subclass 3.2.1 and 3.2.2 */ +#define USB_CDC_NCM_NDP16_INDEX_MIN 0x000C +#define USB_CDC_NCM_NDP32_INDEX_MIN 0x0010 + +/* CDC NCM subclass 3.3.3 Datagram Formatting */ +#define USB_CDC_NCM_DATAGRAM_FORMAT_CRC 0x30 +#define USB_CDC_NCM_DATAGRAM_FORMAT_NOCRC 0X31 + +/* CDC NCM subclass 4.2 NCM Communications Interface Protocol Code */ +#define USB_CDC_NCM_PROTO_CODE_NO_ENCAP_COMMANDS 0x00 +#define USB_CDC_NCM_PROTO_CODE_EXTERN_PROTO 0xFE + +/* CDC NCM subclass 5.2.1 NCM Functional Descriptor, bmNetworkCapabilities */ +#define USB_CDC_NCM_NCAP_ETH_FILTER (1 << 0) +#define USB_CDC_NCM_NCAP_NET_ADDRESS (1 << 1) +#define USB_CDC_NCM_NCAP_ENCAP_COMMAND (1 << 2) +#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE (1 << 3) +#define USB_CDC_NCM_NCAP_CRC_MODE (1 << 4) +#define USB_CDC_NCM_NCAP_NTB_INPUT_SIZE (1 << 5) + +/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ +#define USB_CDC_NCM_NTB16_SUPPORTED (1 << 0) +#define USB_CDC_NCM_NTB32_SUPPORTED (1 << 1) + +/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ +#define USB_CDC_NCM_NDP_ALIGN_MIN_SIZE 0x04 +#define USB_CDC_NCM_NTB_MAX_LENGTH 0x1C + +/* CDC NCM subclass 6.2.5 SetNtbFormat */ +#define USB_CDC_NCM_NTB16_FORMAT 0x00 +#define USB_CDC_NCM_NTB32_FORMAT 0x01 + +/* CDC NCM subclass 6.2.7 SetNtbInputSize */ +#define USB_CDC_NCM_NTB_MIN_IN_SIZE 2048 +#define USB_CDC_NCM_NTB_MIN_OUT_SIZE 2048 + +/* NTB Input Size Structure */ +struct usb_cdc_ncm_ndp_input_size { + __le32 dwNtbInMaxSize; + __le16 wNtbInMaxDatagrams; + __le16 wReserved; +} __attribute__ ((packed)); + +/* CDC NCM subclass 6.2.11 SetCrcMode */ +#define USB_CDC_NCM_CRC_NOT_APPENDED 0x00 +#define USB_CDC_NCM_CRC_APPENDED 0x01 + +#endif /* __LINUX_USB_CDC_H */ diff --git a/include/uapi/linux/usb/ch11.h b/include/uapi/linux/usb/ch11.h new file mode 100644 index 00000000000..7692dc69ccf --- /dev/null +++ b/include/uapi/linux/usb/ch11.h @@ -0,0 +1,266 @@ +/* + * This file holds Hub protocol constants and data structures that are + * defined in chapter 11 (Hub Specification) of the USB 2.0 specification. + * + * It is used/shared between the USB core, the HCDs and couple of other USB + * drivers. + */ + +#ifndef __LINUX_CH11_H +#define __LINUX_CH11_H + +#include /* __u8 etc */ + +/* + * Hub request types + */ + +#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) +#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) + +/* + * Hub class requests + * See USB 2.0 spec Table 11-16 + */ +#define HUB_CLEAR_TT_BUFFER 8 +#define HUB_RESET_TT 9 +#define HUB_GET_TT_STATE 10 +#define HUB_STOP_TT 11 + +/* + * Hub class additional requests defined by USB 3.0 spec + * See USB 3.0 spec Table 10-6 + */ +#define HUB_SET_DEPTH 12 +#define HUB_GET_PORT_ERR_COUNT 13 + +/* + * Hub Class feature numbers + * See USB 2.0 spec Table 11-17 + */ +#define C_HUB_LOCAL_POWER 0 +#define C_HUB_OVER_CURRENT 1 + +/* + * Port feature numbers + * See USB 2.0 spec Table 11-17 + */ +#define USB_PORT_FEAT_CONNECTION 0 +#define USB_PORT_FEAT_ENABLE 1 +#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */ +#define USB_PORT_FEAT_OVER_CURRENT 3 +#define USB_PORT_FEAT_RESET 4 +#define USB_PORT_FEAT_L1 5 /* L1 suspend */ +#define USB_PORT_FEAT_POWER 8 +#define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */ +#define USB_PORT_FEAT_C_CONNECTION 16 +#define USB_PORT_FEAT_C_ENABLE 17 +#define USB_PORT_FEAT_C_SUSPEND 18 +#define USB_PORT_FEAT_C_OVER_CURRENT 19 +#define USB_PORT_FEAT_C_RESET 20 +#define USB_PORT_FEAT_TEST 21 +#define USB_PORT_FEAT_INDICATOR 22 +#define USB_PORT_FEAT_C_PORT_L1 23 + +/* + * Port feature selectors added by USB 3.0 spec. + * See USB 3.0 spec Table 10-7 + */ +#define USB_PORT_FEAT_LINK_STATE 5 +#define USB_PORT_FEAT_U1_TIMEOUT 23 +#define USB_PORT_FEAT_U2_TIMEOUT 24 +#define USB_PORT_FEAT_C_PORT_LINK_STATE 25 +#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 +#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 +#define USB_PORT_FEAT_BH_PORT_RESET 28 +#define USB_PORT_FEAT_C_BH_PORT_RESET 29 +#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 + +#define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8) + +/* USB 3.0 hub remote wake mask bits, see table 10-14 */ +#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) +#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) +#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10) + +/* + * Hub Status and Hub Change results + * See USB 2.0 spec Table 11-19 and Table 11-20 + */ +struct usb_port_status { + __le16 wPortStatus; + __le16 wPortChange; +} __attribute__ ((packed)); + +/* + * wPortStatus bit field + * See USB 2.0 spec Table 11-21 + */ +#define USB_PORT_STAT_CONNECTION 0x0001 +#define USB_PORT_STAT_ENABLE 0x0002 +#define USB_PORT_STAT_SUSPEND 0x0004 +#define USB_PORT_STAT_OVERCURRENT 0x0008 +#define USB_PORT_STAT_RESET 0x0010 +#define USB_PORT_STAT_L1 0x0020 +/* bits 6 to 7 are reserved */ +#define USB_PORT_STAT_POWER 0x0100 +#define USB_PORT_STAT_LOW_SPEED 0x0200 +#define USB_PORT_STAT_HIGH_SPEED 0x0400 +#define USB_PORT_STAT_TEST 0x0800 +#define USB_PORT_STAT_INDICATOR 0x1000 +/* bits 13 to 15 are reserved */ + +/* + * Additions to wPortStatus bit field from USB 3.0 + * See USB 3.0 spec Table 10-10 + */ +#define USB_PORT_STAT_LINK_STATE 0x01e0 +#define USB_SS_PORT_STAT_POWER 0x0200 +#define USB_SS_PORT_STAT_SPEED 0x1c00 +#define USB_PORT_STAT_SPEED_5GBPS 0x0000 +/* Valid only if port is enabled */ +/* Bits that are the same from USB 2.0 */ +#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \ + USB_PORT_STAT_ENABLE | \ + USB_PORT_STAT_OVERCURRENT | \ + USB_PORT_STAT_RESET) + +/* + * Definitions for PORT_LINK_STATE values + * (bits 5-8) in wPortStatus + */ +#define USB_SS_PORT_LS_U0 0x0000 +#define USB_SS_PORT_LS_U1 0x0020 +#define USB_SS_PORT_LS_U2 0x0040 +#define USB_SS_PORT_LS_U3 0x0060 +#define USB_SS_PORT_LS_SS_DISABLED 0x0080 +#define USB_SS_PORT_LS_RX_DETECT 0x00a0 +#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0 +#define USB_SS_PORT_LS_POLLING 0x00e0 +#define USB_SS_PORT_LS_RECOVERY 0x0100 +#define USB_SS_PORT_LS_HOT_RESET 0x0120 +#define USB_SS_PORT_LS_COMP_MOD 0x0140 +#define USB_SS_PORT_LS_LOOPBACK 0x0160 + +/* + * wPortChange bit field + * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10 + * Bits 0 to 5 shown, bits 6 to 15 are reserved + */ +#define USB_PORT_STAT_C_CONNECTION 0x0001 +#define USB_PORT_STAT_C_ENABLE 0x0002 +#define USB_PORT_STAT_C_SUSPEND 0x0004 +#define USB_PORT_STAT_C_OVERCURRENT 0x0008 +#define USB_PORT_STAT_C_RESET 0x0010 +#define USB_PORT_STAT_C_L1 0x0020 +/* + * USB 3.0 wPortChange bit fields + * See USB 3.0 spec Table 10-11 + */ +#define USB_PORT_STAT_C_BH_RESET 0x0020 +#define USB_PORT_STAT_C_LINK_STATE 0x0040 +#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 + +/* + * wHubCharacteristics (masks) + * See USB 2.0 spec Table 11-13, offset 3 + */ +#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */ +#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */ +#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */ +#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */ + +#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */ + +#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */ +#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */ +#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */ +#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */ + +#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */ +#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */ + +struct usb_hub_status { + __le16 wHubStatus; + __le16 wHubChange; +} __attribute__ ((packed)); + +/* + * Hub Status & Hub Change bit masks + * See USB 2.0 spec Table 11-19 and Table 11-20 + * Bits 0 and 1 for wHubStatus and wHubChange + * Bits 2 to 15 are reserved for both + */ +#define HUB_STATUS_LOCAL_POWER 0x0001 +#define HUB_STATUS_OVERCURRENT 0x0002 +#define HUB_CHANGE_LOCAL_POWER 0x0001 +#define HUB_CHANGE_OVERCURRENT 0x0002 + + +/* + * Hub descriptor + * See USB 2.0 spec Table 11-13 + */ + +#define USB_DT_HUB (USB_TYPE_CLASS | 0x09) +#define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a) +#define USB_DT_HUB_NONVAR_SIZE 7 +#define USB_DT_SS_HUB_SIZE 12 + +/* + * Hub Device descriptor + * USB Hub class device protocols + */ + +#define USB_HUB_PR_FS 0 /* Full speed hub */ +#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ +#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ +#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ +#define USB_HUB_PR_SS 3 /* Super speed hub */ + +struct usb_hub_descriptor { + __u8 bDescLength; + __u8 bDescriptorType; + __u8 bNbrPorts; + __le16 wHubCharacteristics; + __u8 bPwrOn2PwrGood; + __u8 bHubContrCurrent; + + /* 2.0 and 3.0 hubs differ here */ + union { + struct { + /* add 1 bit for hub status change; round to bytes */ + __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; + __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; + } __attribute__ ((packed)) hs; + + struct { + __u8 bHubHdrDecLat; + __le16 wHubDelay; + __le16 DeviceRemovable; + } __attribute__ ((packed)) ss; + } u; +} __attribute__ ((packed)); + +/* port indicator status selectors, tables 11-7 and 11-25 */ +#define HUB_LED_AUTO 0 +#define HUB_LED_AMBER 1 +#define HUB_LED_GREEN 2 +#define HUB_LED_OFF 3 + +enum hub_led_mode { + INDICATOR_AUTO = 0, + INDICATOR_CYCLE, + /* software blinks for attention: software, hardware, reserved */ + INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF, + INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF, + INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF +} __attribute__ ((packed)); + +/* Transaction Translator Think Times, in bits */ +#define HUB_TTTT_8_BITS 0x00 +#define HUB_TTTT_16_BITS 0x20 +#define HUB_TTTT_24_BITS 0x40 +#define HUB_TTTT_32_BITS 0x60 + +#endif /* __LINUX_CH11_H */ diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h new file mode 100644 index 00000000000..50598472dc4 --- /dev/null +++ b/include/uapi/linux/usb/ch9.h @@ -0,0 +1,993 @@ +/* + * This file holds USB constants and structures that are needed for + * USB device APIs. These are used by the USB device model, which is + * defined in chapter 9 of the USB 2.0 specification and in the + * Wireless USB 1.0 (spread around). Linux has several APIs in C that + * need these: + * + * - the master/host side Linux-USB kernel driver API; + * - the "usbfs" user space API; and + * - the Linux "gadget" slave/device/peripheral side driver API. + * + * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems + * act either as a USB master/host or as a USB slave/device. That means + * the master and slave side APIs benefit from working well together. + * + * There's also "Wireless USB", using low power short range radios for + * peripheral interconnection but otherwise building on the USB framework. + * + * Note all descriptors are declared '__attribute__((packed))' so that: + * + * [a] they never get padded, either internally (USB spec writers + * probably handled that) or externally; + * + * [b] so that accessing bigger-than-a-bytes fields will never + * generate bus errors on any platform, even when the location of + * its descriptor inside a bundle isn't "naturally aligned", and + * + * [c] for consistency, removing all doubt even when it appears to + * someone that the two other points are non-issues for that + * particular descriptor type. + */ + +#ifndef _UAPI__LINUX_USB_CH9_H +#define _UAPI__LINUX_USB_CH9_H + +#include /* __u8 etc */ +#include /* le16_to_cpu */ + +/*-------------------------------------------------------------------------*/ + +/* CONTROL REQUEST SUPPORT */ + +/* + * USB directions + * + * This bit flag is used in endpoint descriptors' bEndpointAddress field. + * It's also one of three fields in control requests bRequestType. + */ +#define USB_DIR_OUT 0 /* to device */ +#define USB_DIR_IN 0x80 /* to host */ + +/* + * USB types, the second of three bRequestType fields + */ +#define USB_TYPE_MASK (0x03 << 5) +#define USB_TYPE_STANDARD (0x00 << 5) +#define USB_TYPE_CLASS (0x01 << 5) +#define USB_TYPE_VENDOR (0x02 << 5) +#define USB_TYPE_RESERVED (0x03 << 5) + +/* + * USB recipients, the third of three bRequestType fields + */ +#define USB_RECIP_MASK 0x1f +#define USB_RECIP_DEVICE 0x00 +#define USB_RECIP_INTERFACE 0x01 +#define USB_RECIP_ENDPOINT 0x02 +#define USB_RECIP_OTHER 0x03 +/* From Wireless USB 1.0 */ +#define USB_RECIP_PORT 0x04 +#define USB_RECIP_RPIPE 0x05 + +/* + * Standard requests, for the bRequest field of a SETUP packet. + * + * These are qualified by the bRequestType field, so that for example + * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved + * by a GET_STATUS request. + */ +#define USB_REQ_GET_STATUS 0x00 +#define USB_REQ_CLEAR_FEATURE 0x01 +#define USB_REQ_SET_FEATURE 0x03 +#define USB_REQ_SET_ADDRESS 0x05 +#define USB_REQ_GET_DESCRIPTOR 0x06 +#define USB_REQ_SET_DESCRIPTOR 0x07 +#define USB_REQ_GET_CONFIGURATION 0x08 +#define USB_REQ_SET_CONFIGURATION 0x09 +#define USB_REQ_GET_INTERFACE 0x0A +#define USB_REQ_SET_INTERFACE 0x0B +#define USB_REQ_SYNCH_FRAME 0x0C +#define USB_REQ_SET_SEL 0x30 +#define USB_REQ_SET_ISOCH_DELAY 0x31 + +#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ +#define USB_REQ_GET_ENCRYPTION 0x0E +#define USB_REQ_RPIPE_ABORT 0x0E +#define USB_REQ_SET_HANDSHAKE 0x0F +#define USB_REQ_RPIPE_RESET 0x0F +#define USB_REQ_GET_HANDSHAKE 0x10 +#define USB_REQ_SET_CONNECTION 0x11 +#define USB_REQ_SET_SECURITY_DATA 0x12 +#define USB_REQ_GET_SECURITY_DATA 0x13 +#define USB_REQ_SET_WUSB_DATA 0x14 +#define USB_REQ_LOOPBACK_DATA_WRITE 0x15 +#define USB_REQ_LOOPBACK_DATA_READ 0x16 +#define USB_REQ_SET_INTERFACE_DS 0x17 + +/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, + * used by hubs to put ports into a new L1 suspend state, except that it + * forgot to define its number ... + */ + +/* + * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and + * are read as a bit array returned by USB_REQ_GET_STATUS. (So there + * are at most sixteen features of each type.) Hubs may also support a + * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. + */ +#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ +#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ +#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ +#define USB_DEVICE_BATTERY 2 /* (wireless) */ +#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ +#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ +#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ +#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ +#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ + +/* + * Test Mode Selectors + * See USB 2.0 spec Table 9-7 + */ +#define TEST_J 1 +#define TEST_K 2 +#define TEST_SE0_NAK 3 +#define TEST_PACKET 4 +#define TEST_FORCE_EN 5 + +/* + * New Feature Selectors as added by USB 3.0 + * See USB 3.0 spec Table 9-6 + */ +#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ +#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ +#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */ +#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ + +#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 +/* + * Suspend Options, Table 9-7 USB 3.0 spec + */ +#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) +#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) + +#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ + +/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ +#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */ +#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ +#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ + +/** + * struct usb_ctrlrequest - SETUP data for a USB device control request + * @bRequestType: matches the USB bmRequestType field + * @bRequest: matches the USB bRequest field + * @wValue: matches the USB wValue field (le16 byte order) + * @wIndex: matches the USB wIndex field (le16 byte order) + * @wLength: matches the USB wLength field (le16 byte order) + * + * This structure is used to send control requests to a USB device. It matches + * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the + * USB spec for a fuller description of the different fields, and what they are + * used for. + * + * Note that the driver for any interface can issue control requests. + * For most devices, interfaces don't coordinate with each other, so + * such requests may be made at any time. + */ +struct usb_ctrlrequest { + __u8 bRequestType; + __u8 bRequest; + __le16 wValue; + __le16 wIndex; + __le16 wLength; +} __attribute__ ((packed)); + +/*-------------------------------------------------------------------------*/ + +/* + * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or + * (rarely) accepted by SET_DESCRIPTOR. + * + * Note that all multi-byte values here are encoded in little endian + * byte order "on the wire". Within the kernel and when exposed + * through the Linux-USB APIs, they are not converted to cpu byte + * order; it is the responsibility of the client code to do this. + * The single exception is when device and configuration descriptors (but + * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); + * in this case the fields are converted to host endianness by the kernel. + */ + +/* + * Descriptor types ... USB 2.0 spec table 9.5 + */ +#define USB_DT_DEVICE 0x01 +#define USB_DT_CONFIG 0x02 +#define USB_DT_STRING 0x03 +#define USB_DT_INTERFACE 0x04 +#define USB_DT_ENDPOINT 0x05 +#define USB_DT_DEVICE_QUALIFIER 0x06 +#define USB_DT_OTHER_SPEED_CONFIG 0x07 +#define USB_DT_INTERFACE_POWER 0x08 +/* these are from a minor usb 2.0 revision (ECN) */ +#define USB_DT_OTG 0x09 +#define USB_DT_DEBUG 0x0a +#define USB_DT_INTERFACE_ASSOCIATION 0x0b +/* these are from the Wireless USB spec */ +#define USB_DT_SECURITY 0x0c +#define USB_DT_KEY 0x0d +#define USB_DT_ENCRYPTION_TYPE 0x0e +#define USB_DT_BOS 0x0f +#define USB_DT_DEVICE_CAPABILITY 0x10 +#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 +#define USB_DT_WIRE_ADAPTER 0x21 +#define USB_DT_RPIPE 0x22 +#define USB_DT_CS_RADIO_CONTROL 0x23 +/* From the T10 UAS specification */ +#define USB_DT_PIPE_USAGE 0x24 +/* From the USB 3.0 spec */ +#define USB_DT_SS_ENDPOINT_COMP 0x30 + +/* Conventional codes for class-specific descriptors. The convention is + * defined in the USB "Common Class" Spec (3.11). Individual class specs + * are authoritative for their usage, not the "common class" writeup. + */ +#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) +#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) +#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) +#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) +#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) + +/* All standard descriptors have these 2 fields at the beginning */ +struct usb_descriptor_header { + __u8 bLength; + __u8 bDescriptorType; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE: Device descriptor */ +struct usb_device_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __le16 idVendor; + __le16 idProduct; + __le16 bcdDevice; + __u8 iManufacturer; + __u8 iProduct; + __u8 iSerialNumber; + __u8 bNumConfigurations; +} __attribute__ ((packed)); + +#define USB_DT_DEVICE_SIZE 18 + + +/* + * Device and/or Interface Class codes + * as found in bDeviceClass or bInterfaceClass + * and defined by www.usb.org documents + */ +#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ +#define USB_CLASS_AUDIO 1 +#define USB_CLASS_COMM 2 +#define USB_CLASS_HID 3 +#define USB_CLASS_PHYSICAL 5 +#define USB_CLASS_STILL_IMAGE 6 +#define USB_CLASS_PRINTER 7 +#define USB_CLASS_MASS_STORAGE 8 +#define USB_CLASS_HUB 9 +#define USB_CLASS_CDC_DATA 0x0a +#define USB_CLASS_CSCID 0x0b /* chip+ smart card */ +#define USB_CLASS_CONTENT_SEC 0x0d /* content security */ +#define USB_CLASS_VIDEO 0x0e +#define USB_CLASS_WIRELESS_CONTROLLER 0xe0 +#define USB_CLASS_MISC 0xef +#define USB_CLASS_APP_SPEC 0xfe +#define USB_CLASS_VENDOR_SPEC 0xff + +#define USB_SUBCLASS_VENDOR_SPEC 0xff + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_CONFIG: Configuration descriptor information. + * + * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the + * descriptor type is different. Highspeed-capable devices can look + * different depending on what speed they're currently running. Only + * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG + * descriptors. + */ +struct usb_config_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumInterfaces; + __u8 bConfigurationValue; + __u8 iConfiguration; + __u8 bmAttributes; + __u8 bMaxPower; +} __attribute__ ((packed)); + +#define USB_DT_CONFIG_SIZE 9 + +/* from config descriptor bmAttributes */ +#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ +#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ +#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ +#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_STRING: String descriptor */ +struct usb_string_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wData[1]; /* UTF-16LE encoded */ +} __attribute__ ((packed)); + +/* note that "string" zero is special, it holds language codes that + * the device supports, not Unicode characters. + */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE: Interface descriptor */ +struct usb_interface_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bInterfaceNumber; + __u8 bAlternateSetting; + __u8 bNumEndpoints; + __u8 bInterfaceClass; + __u8 bInterfaceSubClass; + __u8 bInterfaceProtocol; + __u8 iInterface; +} __attribute__ ((packed)); + +#define USB_DT_INTERFACE_SIZE 9 + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_ENDPOINT: Endpoint descriptor */ +struct usb_endpoint_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEndpointAddress; + __u8 bmAttributes; + __le16 wMaxPacketSize; + __u8 bInterval; + + /* NOTE: these two are _only_ in audio endpoints. */ + /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ + __u8 bRefresh; + __u8 bSynchAddress; +} __attribute__ ((packed)); + +#define USB_DT_ENDPOINT_SIZE 7 +#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ + + +/* + * Endpoints + */ +#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ +#define USB_ENDPOINT_DIR_MASK 0x80 + +#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ +#define USB_ENDPOINT_XFER_CONTROL 0 +#define USB_ENDPOINT_XFER_ISOC 1 +#define USB_ENDPOINT_XFER_BULK 2 +#define USB_ENDPOINT_XFER_INT 3 +#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 + +/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */ +#define USB_ENDPOINT_INTRTYPE 0x30 +#define USB_ENDPOINT_INTR_PERIODIC (0 << 4) +#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4) + +#define USB_ENDPOINT_SYNCTYPE 0x0c +#define USB_ENDPOINT_SYNC_NONE (0 << 2) +#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) +#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) +#define USB_ENDPOINT_SYNC_SYNC (3 << 2) + +#define USB_ENDPOINT_USAGE_MASK 0x30 +#define USB_ENDPOINT_USAGE_DATA 0x00 +#define USB_ENDPOINT_USAGE_FEEDBACK 0x10 +#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */ + +/*-------------------------------------------------------------------------*/ + +/** + * usb_endpoint_num - get the endpoint's number + * @epd: endpoint to be checked + * + * Returns @epd's number: 0 to 15. + */ +static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) +{ + return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; +} + +/** + * usb_endpoint_type - get the endpoint's transfer type + * @epd: endpoint to be checked + * + * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according + * to @epd's transfer type. + */ +static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) +{ + return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; +} + +/** + * usb_endpoint_dir_in - check if the endpoint has IN direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type IN, otherwise it returns false. + */ +static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); +} + +/** + * usb_endpoint_dir_out - check if the endpoint has OUT direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type OUT, otherwise it returns false. + */ +static inline int usb_endpoint_dir_out( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); +} + +/** + * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type bulk, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_bulk( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK); +} + +/** + * usb_endpoint_xfer_control - check if the endpoint has control transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type control, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_control( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_CONTROL); +} + +/** + * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type interrupt, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_int( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_INT); +} + +/** + * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type isochronous, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_isoc( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_ISOC); +} + +/** + * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_in( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd); +} + +/** + * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_out( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd); +} + +/** + * usb_endpoint_is_int_in - check if the endpoint is interrupt IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_in( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd); +} + +/** + * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_out( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd); +} + +/** + * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_in( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd); +} + +/** + * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_out( + const struct usb_endpoint_descriptor *epd) +{ + return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); +} + +/** + * usb_endpoint_maxp - get endpoint's max packet size + * @epd: endpoint to be checked + * + * Returns @epd's max packet + */ +static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) +{ + return __le16_to_cpu(epd->wMaxPacketSize); +} + +static inline int usb_endpoint_interrupt_type( + const struct usb_endpoint_descriptor *epd) +{ + return epd->bmAttributes & USB_ENDPOINT_INTRTYPE; +} + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ +struct usb_ss_ep_comp_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bMaxBurst; + __u8 bmAttributes; + __le16 wBytesPerInterval; +} __attribute__ ((packed)); + +#define USB_DT_SS_EP_COMP_SIZE 6 + +/* Bits 4:0 of bmAttributes if this is a bulk endpoint */ +static inline int +usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp) +{ + int max_streams; + + if (!comp) + return 0; + + max_streams = comp->bmAttributes & 0x1f; + + if (!max_streams) + return 0; + + max_streams = 1 << max_streams; + + return max_streams; +} + +/* Bits 1:0 of bmAttributes if this is an isoc endpoint */ +#define USB_SS_MULT(p) (1 + ((p) & 0x3)) + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ +struct usb_qualifier_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __u8 bNumConfigurations; + __u8 bRESERVED; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_OTG (from OTG 1.0a supplement) */ +struct usb_otg_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bmAttributes; /* support for HNP, SRP, etc */ +} __attribute__ ((packed)); + +/* from usb_otg_descriptor.bmAttributes */ +#define USB_OTG_SRP (1 << 0) +#define USB_OTG_HNP (1 << 1) /* swap host/device roles */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ +struct usb_debug_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + /* bulk endpoints with 8 byte maxpacket */ + __u8 bDebugInEndpoint; + __u8 bDebugOutEndpoint; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ +struct usb_interface_assoc_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bFirstInterface; + __u8 bInterfaceCount; + __u8 bFunctionClass; + __u8 bFunctionSubClass; + __u8 bFunctionProtocol; + __u8 iFunction; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_SECURITY: group of wireless security descriptors, including + * encryption types available for setting up a CC/association. + */ +struct usb_security_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumEncryptionTypes; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys + * may be retrieved. + */ +struct usb_key_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 tTKID[3]; + __u8 bReserved; + __u8 bKeyData[0]; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ +struct usb_encryption_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEncryptionType; +#define USB_ENC_TYPE_UNSECURE 0 +#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ +#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ +#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ + __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ + __u8 bAuthKeyIndex; +} __attribute__((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_BOS: group of device-level capabilities */ +struct usb_bos_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumDeviceCaps; +} __attribute__((packed)); + +#define USB_DT_BOS_SIZE 5 +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ +struct usb_dev_cap_header { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; +} __attribute__((packed)); + +#define USB_CAP_TYPE_WIRELESS_USB 1 + +struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + + __u8 bmAttributes; +#define USB_WIRELESS_P2P_DRD (1 << 1) +#define USB_WIRELESS_BEACON_MASK (3 << 2) +#define USB_WIRELESS_BEACON_SELF (1 << 2) +#define USB_WIRELESS_BEACON_DIRECTED (2 << 2) +#define USB_WIRELESS_BEACON_NONE (3 << 2) + __le16 wPHYRates; /* bit rates, Mbps */ +#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ +#define USB_WIRELESS_PHY_80 (1 << 1) +#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ +#define USB_WIRELESS_PHY_160 (1 << 3) +#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ +#define USB_WIRELESS_PHY_320 (1 << 5) +#define USB_WIRELESS_PHY_400 (1 << 6) +#define USB_WIRELESS_PHY_480 (1 << 7) + __u8 bmTFITXPowerInfo; /* TFI power levels */ + __u8 bmFFITXPowerInfo; /* FFI power levels */ + __le16 bmBandGroup; + __u8 bReserved; +} __attribute__((packed)); + +/* USB 2.0 Extension descriptor */ +#define USB_CAP_TYPE_EXT 2 + +struct usb_ext_cap_descriptor { /* Link Power Management */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __le32 bmAttributes; +#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ +#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */ +#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/ +#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */ +#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8) +#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12) +} __attribute__((packed)); + +#define USB_DT_USB_EXT_CAP_SIZE 7 + +/* + * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB + * specific device level capabilities + */ +#define USB_SS_CAP_TYPE 3 +struct usb_ss_cap_descriptor { /* Link Power Management */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bmAttributes; +#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */ + __le16 wSpeedSupported; +#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */ +#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */ +#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */ +#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */ + __u8 bFunctionalitySupport; + __u8 bU1devExitLat; + __le16 bU2DevExitLat; +} __attribute__((packed)); + +#define USB_DT_USB_SS_CAP_SIZE 10 + +/* + * Container ID Capability descriptor: Defines the instance unique ID used to + * identify the instance across all operating modes + */ +#define CONTAINER_ID_TYPE 4 +struct usb_ss_container_id_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bReserved; + __u8 ContainerID[16]; /* 128-bit number */ +} __attribute__((packed)); + +#define USB_DT_USB_SS_CONTN_ID_SIZE 20 +/*-------------------------------------------------------------------------*/ + +/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with + * each endpoint descriptor for a wireless device + */ +struct usb_wireless_ep_comp_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bMaxBurst; + __u8 bMaxSequence; + __le16 wMaxStreamDelay; + __le16 wOverTheAirPacketSize; + __u8 bOverTheAirInterval; + __u8 bmCompAttributes; +#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ +#define USB_ENDPOINT_SWITCH_NO 0 +#define USB_ENDPOINT_SWITCH_SWITCH 1 +#define USB_ENDPOINT_SWITCH_SCALE 2 +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless + * host and a device for connection set up, mutual authentication, and + * exchanging short lived session keys. The handshake depends on a CC. + */ +struct usb_handshake { + __u8 bMessageNumber; + __u8 bStatus; + __u8 tTKID[3]; + __u8 bReserved; + __u8 CDID[16]; + __u8 nonce[16]; + __u8 MIC[8]; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). + * A CC may also be set up using non-wireless secure channels (including + * wired USB!), and some devices may support CCs with multiple hosts. + */ +struct usb_connection_context { + __u8 CHID[16]; /* persistent host id */ + __u8 CDID[16]; /* device id (unique w/in host context) */ + __u8 CK[16]; /* connection key */ +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB 2.0 defines three speeds, here's how Linux identifies them */ + +enum usb_device_speed { + USB_SPEED_UNKNOWN = 0, /* enumerating */ + USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ + USB_SPEED_HIGH, /* usb 2.0 */ + USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ + USB_SPEED_SUPER, /* usb 3.0 */ +}; + + +enum usb_device_state { + /* NOTATTACHED isn't in the USB spec, and this state acts + * the same as ATTACHED ... but it's clearer this way. + */ + USB_STATE_NOTATTACHED = 0, + + /* chapter 9 and authentication (wireless) device states */ + USB_STATE_ATTACHED, + USB_STATE_POWERED, /* wired */ + USB_STATE_RECONNECTING, /* auth */ + USB_STATE_UNAUTHENTICATED, /* auth */ + USB_STATE_DEFAULT, /* limited function */ + USB_STATE_ADDRESS, + USB_STATE_CONFIGURED, /* most functions */ + + USB_STATE_SUSPENDED + + /* NOTE: there are actually four different SUSPENDED + * states, returning to POWERED, DEFAULT, ADDRESS, or + * CONFIGURED respectively when SOF tokens flow again. + * At this level there's no difference between L1 and L2 + * suspend states. (L2 being original USB 1.1 suspend.) + */ +}; + +enum usb3_link_state { + USB3_LPM_U0 = 0, + USB3_LPM_U1, + USB3_LPM_U2, + USB3_LPM_U3 +}; + +/* + * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1. + * 0xff means the parent hub will accept transitions to U1, but will not + * initiate a transition. + * + * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to + * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved + * values. + * + * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2. + * 0xff means the parent hub will accept transitions to U2, but will not + * initiate a transition. + * + * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to + * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2 + * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means + * 65.024ms. + */ +#define USB3_LPM_DISABLED 0x0 +#define USB3_LPM_U1_MAX_TIMEOUT 0x7F +#define USB3_LPM_U2_MAX_TIMEOUT 0xFE +#define USB3_LPM_DEVICE_INITIATED 0xFF + +struct usb_set_sel_req { + __u8 u1_sel; + __u8 u1_pel; + __le16 u2_sel; + __le16 u2_pel; +} __attribute__ ((packed)); + +/* + * The Set System Exit Latency control transfer provides one byte each for + * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each + * are two bytes long. + */ +#define USB3_LPM_MAX_U1_SEL_PEL 0xFF +#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF + +/*-------------------------------------------------------------------------*/ + +/* + * As per USB compliance update, a device that is actively drawing + * more than 100mA from USB must report itself as bus-powered in + * the GetStatus(DEVICE) call. + * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34 + */ +#define USB_SELF_POWER_VBUS_MAX_DRAW 100 + +#endif /* _UAPI__LINUX_USB_CH9_H */ diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h new file mode 100644 index 00000000000..d6b01283f85 --- /dev/null +++ b/include/uapi/linux/usb/functionfs.h @@ -0,0 +1,169 @@ +#ifndef _UAPI__LINUX_FUNCTIONFS_H__ +#define _UAPI__LINUX_FUNCTIONFS_H__ + + +#include +#include + +#include + + +enum { + FUNCTIONFS_DESCRIPTORS_MAGIC = 1, + FUNCTIONFS_STRINGS_MAGIC = 2 +}; + + +#ifndef __KERNEL__ + +/* Descriptor of an non-audio endpoint */ +struct usb_endpoint_descriptor_no_audio { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEndpointAddress; + __u8 bmAttributes; + __le16 wMaxPacketSize; + __u8 bInterval; +} __attribute__((packed)); + + +/* + * All numbers must be in little endian order. + */ + +struct usb_functionfs_descs_head { + __le32 magic; + __le32 length; + __le32 fs_count; + __le32 hs_count; +} __attribute__((packed)); + +/* + * Descriptors format: + * + * | off | name | type | description | + * |-----+-----------+--------------+--------------------------------------| + * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC | + * | 4 | length | LE32 | length of the whole data chunk | + * | 8 | fs_count | LE32 | number of full-speed descriptors | + * | 12 | hs_count | LE32 | number of high-speed descriptors | + * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors | + * | | hs_descrs | Descriptor[] | list of high-speed descriptors | + * + * descs are just valid USB descriptors and have the following format: + * + * | off | name | type | description | + * |-----+-----------------+------+--------------------------| + * | 0 | bLength | U8 | length of the descriptor | + * | 1 | bDescriptorType | U8 | descriptor type | + * | 2 | payload | | descriptor's payload | + */ + +struct usb_functionfs_strings_head { + __le32 magic; + __le32 length; + __le32 str_count; + __le32 lang_count; +} __attribute__((packed)); + +/* + * Strings format: + * + * | off | name | type | description | + * |-----+------------+-----------------------+----------------------------| + * | 0 | magic | LE32 | FUNCTIONFS_STRINGS_MAGIC | + * | 4 | length | LE32 | length of the data chunk | + * | 8 | str_count | LE32 | number of strings | + * | 12 | lang_count | LE32 | number of languages | + * | 16 | stringtab | StringTab[lang_count] | table of strings per lang | + * + * For each language there is one stringtab entry (ie. there are lang_count + * stringtab entires). Each StringTab has following format: + * + * | off | name | type | description | + * |-----+---------+-------------------+------------------------------------| + * | 0 | lang | LE16 | language code | + * | 2 | strings | String[str_count] | array of strings in given language | + * + * For each string there is one strings entry (ie. there are str_count + * string entries). Each String is a NUL terminated string encoded in + * UTF-8. + */ + +#endif + + +/* + * Events are delivered on the ep0 file descriptor, when the user mode driver + * reads from this file descriptor after writing the descriptors. Don't + * stop polling this descriptor. + */ + +enum usb_functionfs_event_type { + FUNCTIONFS_BIND, + FUNCTIONFS_UNBIND, + + FUNCTIONFS_ENABLE, + FUNCTIONFS_DISABLE, + + FUNCTIONFS_SETUP, + + FUNCTIONFS_SUSPEND, + FUNCTIONFS_RESUME +}; + +/* NOTE: this structure must stay the same size and layout on + * both 32-bit and 64-bit kernels. + */ +struct usb_functionfs_event { + union { + /* SETUP: packet; DATA phase i/o precedes next event + *(setup.bmRequestType & USB_DIR_IN) flags direction */ + struct usb_ctrlrequest setup; + } __attribute__((packed)) u; + + /* enum usb_functionfs_event_type */ + __u8 type; + __u8 _pad[3]; +} __attribute__((packed)); + + +/* Endpoint ioctls */ +/* The same as in gadgetfs */ + +/* IN transfers may be reported to the gadget driver as complete + * when the fifo is loaded, before the host reads the data; + * OUT transfers may be reported to the host's "client" driver as + * complete when they're sitting in the FIFO unread. + * THIS returns how many bytes are "unclaimed" in the endpoint fifo + * (needed for precise fault handling, when the hardware allows it) + */ +#define FUNCTIONFS_FIFO_STATUS _IO('g', 1) + +/* discards any unclaimed data in the fifo. */ +#define FUNCTIONFS_FIFO_FLUSH _IO('g', 2) + +/* resets endpoint halt+toggle; used to implement set_interface. + * some hardware (like pxa2xx) can't support this. + */ +#define FUNCTIONFS_CLEAR_HALT _IO('g', 3) + +/* Specific for functionfs */ + +/* + * Returns reverse mapping of an interface. Called on EP0. If there + * is no such interface returns -EDOM. If function is not active + * returns -ENODEV. + */ +#define FUNCTIONFS_INTERFACE_REVMAP _IO('g', 128) + +/* + * Returns real bEndpointAddress of an endpoint. If function is not + * active returns -ENODEV. + */ +#define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129) + + + +#endif /* _UAPI__LINUX_FUNCTIONFS_H__ */ diff --git a/include/uapi/linux/usb/g_printer.h b/include/uapi/linux/usb/g_printer.h new file mode 100644 index 00000000000..6178fde50f7 --- /dev/null +++ b/include/uapi/linux/usb/g_printer.h @@ -0,0 +1,35 @@ +/* + * g_printer.h -- Header file for USB Printer gadget driver + * + * Copyright (C) 2007 Craig W. Nadler + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __LINUX_USB_G_PRINTER_H +#define __LINUX_USB_G_PRINTER_H + +#define PRINTER_NOT_ERROR 0x08 +#define PRINTER_SELECTED 0x10 +#define PRINTER_PAPER_EMPTY 0x20 + +/* The 'g' code is also used by gadgetfs ioctl requests. + * Don't add any colliding codes to either driver, and keep + * them in unique ranges (size 0x20 for now). + */ +#define GADGET_GET_PRINTER_STATUS _IOR('g', 0x21, unsigned char) +#define GADGET_SET_PRINTER_STATUS _IOWR('g', 0x22, unsigned char) + +#endif /* __LINUX_USB_G_PRINTER_H */ diff --git a/include/uapi/linux/usb/gadgetfs.h b/include/uapi/linux/usb/gadgetfs.h new file mode 100644 index 00000000000..0bb12e0d4f8 --- /dev/null +++ b/include/uapi/linux/usb/gadgetfs.h @@ -0,0 +1,88 @@ +/* + * Filesystem based user-mode API to USB Gadget controller hardware + * + * Other than ep0 operations, most things are done by read() and write() + * on endpoint files found in one directory. They are configured by + * writing descriptors, and then may be used for normal stream style + * i/o requests. When ep0 is configured, the device can enumerate; + * when it's closed, the device disconnects from usb. Operations on + * ep0 require ioctl() operations. + * + * Configuration and device descriptors get written to /dev/gadget/$CHIP, + * which may then be used to read usb_gadgetfs_event structs. The driver + * may activate endpoints as it handles SET_CONFIGURATION setup events, + * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT + * then performing data transfers by reading or writing. + */ + +#ifndef __LINUX_USB_GADGETFS_H +#define __LINUX_USB_GADGETFS_H + +#include +#include + +#include + +/* + * Events are delivered on the ep0 file descriptor, when the user mode driver + * reads from this file descriptor after writing the descriptors. Don't + * stop polling this descriptor. + */ + +enum usb_gadgetfs_event_type { + GADGETFS_NOP = 0, + + GADGETFS_CONNECT, + GADGETFS_DISCONNECT, + GADGETFS_SETUP, + GADGETFS_SUSPEND, + /* and likely more ! */ +}; + +/* NOTE: this structure must stay the same size and layout on + * both 32-bit and 64-bit kernels. + */ +struct usb_gadgetfs_event { + union { + /* NOP, DISCONNECT, SUSPEND: nothing + * ... some hardware can't report disconnection + */ + + /* CONNECT: just the speed */ + enum usb_device_speed speed; + + /* SETUP: packet; DATA phase i/o precedes next event + *(setup.bmRequestType & USB_DIR_IN) flags direction + * ... includes SET_CONFIGURATION, SET_INTERFACE + */ + struct usb_ctrlrequest setup; + } u; + enum usb_gadgetfs_event_type type; +}; + + +/* The 'g' code is also used by printer gadget ioctl requests. + * Don't add any colliding codes to either driver, and keep + * them in unique ranges (size 0x20 for now). + */ + +/* endpoint ioctls */ + +/* IN transfers may be reported to the gadget driver as complete + * when the fifo is loaded, before the host reads the data; + * OUT transfers may be reported to the host's "client" driver as + * complete when they're sitting in the FIFO unread. + * THIS returns how many bytes are "unclaimed" in the endpoint fifo + * (needed for precise fault handling, when the hardware allows it) + */ +#define GADGETFS_FIFO_STATUS _IO('g', 1) + +/* discards any unclaimed data in the fifo. */ +#define GADGETFS_FIFO_FLUSH _IO('g', 2) + +/* resets endpoint halt+toggle; used to implement set_interface. + * some hardware (like pxa2xx) can't support this. + */ +#define GADGETFS_CLEAR_HALT _IO('g', 3) + +#endif /* __LINUX_USB_GADGETFS_H */ diff --git a/include/uapi/linux/usb/midi.h b/include/uapi/linux/usb/midi.h new file mode 100644 index 00000000000..c8c52e3c91d --- /dev/null +++ b/include/uapi/linux/usb/midi.h @@ -0,0 +1,112 @@ +/* + * -- USB MIDI definitions. + * + * Copyright (C) 2006 Thumtronics Pty Ltd. + * Developed for Thumtronics by Grey Innovation + * Ben Williamson + * + * This software is distributed under the terms of the GNU General Public + * License ("GPL") version 2, as published by the Free Software Foundation. + * + * This file holds USB constants and structures defined + * by the USB Device Class Definition for MIDI Devices. + * Comments below reference relevant sections of that document: + * + * http://www.usb.org/developers/devclass_docs/midi10.pdf + */ + +#ifndef __LINUX_USB_MIDI_H +#define __LINUX_USB_MIDI_H + +#include + +/* A.1 MS Class-Specific Interface Descriptor Subtypes */ +#define USB_MS_HEADER 0x01 +#define USB_MS_MIDI_IN_JACK 0x02 +#define USB_MS_MIDI_OUT_JACK 0x03 +#define USB_MS_ELEMENT 0x04 + +/* A.2 MS Class-Specific Endpoint Descriptor Subtypes */ +#define USB_MS_GENERAL 0x01 + +/* A.3 MS MIDI IN and OUT Jack Types */ +#define USB_MS_EMBEDDED 0x01 +#define USB_MS_EXTERNAL 0x02 + +/* 6.1.2.1 Class-Specific MS Interface Header Descriptor */ +struct usb_ms_header_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __le16 bcdMSC; + __le16 wTotalLength; +} __attribute__ ((packed)); + +#define USB_DT_MS_HEADER_SIZE 7 + +/* 6.1.2.2 MIDI IN Jack Descriptor */ +struct usb_midi_in_jack_descriptor { + __u8 bLength; + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* USB_MS_MIDI_IN_JACK */ + __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ + __u8 bJackID; + __u8 iJack; +} __attribute__ ((packed)); + +#define USB_DT_MIDI_IN_SIZE 6 + +struct usb_midi_source_pin { + __u8 baSourceID; + __u8 baSourcePin; +} __attribute__ ((packed)); + +/* 6.1.2.3 MIDI OUT Jack Descriptor */ +struct usb_midi_out_jack_descriptor { + __u8 bLength; + __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ + __u8 bDescriptorSubtype; /* USB_MS_MIDI_OUT_JACK */ + __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ + __u8 bJackID; + __u8 bNrInputPins; /* p */ + struct usb_midi_source_pin pins[]; /* [p] */ + /*__u8 iJack; -- omitted due to variable-sized pins[] */ +} __attribute__ ((packed)); + +#define USB_DT_MIDI_OUT_SIZE(p) (7 + 2 * (p)) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(p) \ +struct usb_midi_out_jack_descriptor_##p { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bJackType; \ + __u8 bJackID; \ + __u8 bNrInputPins; \ + struct usb_midi_source_pin pins[p]; \ + __u8 iJack; \ +} __attribute__ ((packed)) + +/* 6.2.2 Class-Specific MS Bulk Data Endpoint Descriptor */ +struct usb_ms_endpoint_descriptor { + __u8 bLength; /* 4+n */ + __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ + __u8 bDescriptorSubtype; /* USB_MS_GENERAL */ + __u8 bNumEmbMIDIJack; /* n */ + __u8 baAssocJackID[]; /* [n] */ +} __attribute__ ((packed)); + +#define USB_DT_MS_ENDPOINT_SIZE(n) (4 + (n)) + +/* As above, but more useful for defining your own descriptors: */ +#define DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(n) \ +struct usb_ms_endpoint_descriptor_##n { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubtype; \ + __u8 bNumEmbMIDIJack; \ + __u8 baAssocJackID[n]; \ +} __attribute__ ((packed)) + +#endif /* __LINUX_USB_MIDI_H */ diff --git a/include/uapi/linux/usb/tmc.h b/include/uapi/linux/usb/tmc.h new file mode 100644 index 00000000000..c045ae12556 --- /dev/null +++ b/include/uapi/linux/usb/tmc.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany + * Copyright (C) 2008 Novell, Inc. + * Copyright (C) 2008 Greg Kroah-Hartman + * + * This file holds USB constants defined by the USB Device Class + * Definition for Test and Measurement devices published by the USB-IF. + * + * It also has the ioctl definitions for the usbtmc kernel driver that + * userspace needs to know about. + */ + +#ifndef __LINUX_USB_TMC_H +#define __LINUX_USB_TMC_H + +/* USB TMC status values */ +#define USBTMC_STATUS_SUCCESS 0x01 +#define USBTMC_STATUS_PENDING 0x02 +#define USBTMC_STATUS_FAILED 0x80 +#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81 +#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82 +#define USBTMC_STATUS_SPLIT_IN_PROGRESS 0x83 + +/* USB TMC requests values */ +#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT 1 +#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS 2 +#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN 3 +#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS 4 +#define USBTMC_REQUEST_INITIATE_CLEAR 5 +#define USBTMC_REQUEST_CHECK_CLEAR_STATUS 6 +#define USBTMC_REQUEST_GET_CAPABILITIES 7 +#define USBTMC_REQUEST_INDICATOR_PULSE 64 + +/* Request values for USBTMC driver's ioctl entry point */ +#define USBTMC_IOC_NR 91 +#define USBTMC_IOCTL_INDICATOR_PULSE _IO(USBTMC_IOC_NR, 1) +#define USBTMC_IOCTL_CLEAR _IO(USBTMC_IOC_NR, 2) +#define USBTMC_IOCTL_ABORT_BULK_OUT _IO(USBTMC_IOC_NR, 3) +#define USBTMC_IOCTL_ABORT_BULK_IN _IO(USBTMC_IOC_NR, 4) +#define USBTMC_IOCTL_CLEAR_OUT_HALT _IO(USBTMC_IOC_NR, 6) +#define USBTMC_IOCTL_CLEAR_IN_HALT _IO(USBTMC_IOC_NR, 7) + +#endif diff --git a/include/uapi/linux/usb/video.h b/include/uapi/linux/usb/video.h new file mode 100644 index 00000000000..3b3b95e01f7 --- /dev/null +++ b/include/uapi/linux/usb/video.h @@ -0,0 +1,568 @@ +/* + * USB Video Class definitions. + * + * Copyright (C) 2009 Laurent Pinchart + * + * This file holds USB constants and structures defined by the USB Device + * Class Definition for Video Devices. Unless otherwise stated, comments + * below reference relevant sections of the USB Video Class 1.1 specification + * available at + * + * http://www.usb.org/developers/devclass_docs/USB_Video_Class_1_1.zip + */ + +#ifndef __LINUX_USB_VIDEO_H +#define __LINUX_USB_VIDEO_H + +#include + +/* -------------------------------------------------------------------------- + * UVC constants + */ + +/* A.2. Video Interface Subclass Codes */ +#define UVC_SC_UNDEFINED 0x00 +#define UVC_SC_VIDEOCONTROL 0x01 +#define UVC_SC_VIDEOSTREAMING 0x02 +#define UVC_SC_VIDEO_INTERFACE_COLLECTION 0x03 + +/* A.3. Video Interface Protocol Codes */ +#define UVC_PC_PROTOCOL_UNDEFINED 0x00 + +/* A.5. Video Class-Specific VC Interface Descriptor Subtypes */ +#define UVC_VC_DESCRIPTOR_UNDEFINED 0x00 +#define UVC_VC_HEADER 0x01 +#define UVC_VC_INPUT_TERMINAL 0x02 +#define UVC_VC_OUTPUT_TERMINAL 0x03 +#define UVC_VC_SELECTOR_UNIT 0x04 +#define UVC_VC_PROCESSING_UNIT 0x05 +#define UVC_VC_EXTENSION_UNIT 0x06 + +/* A.6. Video Class-Specific VS Interface Descriptor Subtypes */ +#define UVC_VS_UNDEFINED 0x00 +#define UVC_VS_INPUT_HEADER 0x01 +#define UVC_VS_OUTPUT_HEADER 0x02 +#define UVC_VS_STILL_IMAGE_FRAME 0x03 +#define UVC_VS_FORMAT_UNCOMPRESSED 0x04 +#define UVC_VS_FRAME_UNCOMPRESSED 0x05 +#define UVC_VS_FORMAT_MJPEG 0x06 +#define UVC_VS_FRAME_MJPEG 0x07 +#define UVC_VS_FORMAT_MPEG2TS 0x0a +#define UVC_VS_FORMAT_DV 0x0c +#define UVC_VS_COLORFORMAT 0x0d +#define UVC_VS_FORMAT_FRAME_BASED 0x10 +#define UVC_VS_FRAME_FRAME_BASED 0x11 +#define UVC_VS_FORMAT_STREAM_BASED 0x12 + +/* A.7. Video Class-Specific Endpoint Descriptor Subtypes */ +#define UVC_EP_UNDEFINED 0x00 +#define UVC_EP_GENERAL 0x01 +#define UVC_EP_ENDPOINT 0x02 +#define UVC_EP_INTERRUPT 0x03 + +/* A.8. Video Class-Specific Request Codes */ +#define UVC_RC_UNDEFINED 0x00 +#define UVC_SET_CUR 0x01 +#define UVC_GET_CUR 0x81 +#define UVC_GET_MIN 0x82 +#define UVC_GET_MAX 0x83 +#define UVC_GET_RES 0x84 +#define UVC_GET_LEN 0x85 +#define UVC_GET_INFO 0x86 +#define UVC_GET_DEF 0x87 + +/* A.9.1. VideoControl Interface Control Selectors */ +#define UVC_VC_CONTROL_UNDEFINED 0x00 +#define UVC_VC_VIDEO_POWER_MODE_CONTROL 0x01 +#define UVC_VC_REQUEST_ERROR_CODE_CONTROL 0x02 + +/* A.9.2. Terminal Control Selectors */ +#define UVC_TE_CONTROL_UNDEFINED 0x00 + +/* A.9.3. Selector Unit Control Selectors */ +#define UVC_SU_CONTROL_UNDEFINED 0x00 +#define UVC_SU_INPUT_SELECT_CONTROL 0x01 + +/* A.9.4. Camera Terminal Control Selectors */ +#define UVC_CT_CONTROL_UNDEFINED 0x00 +#define UVC_CT_SCANNING_MODE_CONTROL 0x01 +#define UVC_CT_AE_MODE_CONTROL 0x02 +#define UVC_CT_AE_PRIORITY_CONTROL 0x03 +#define UVC_CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 +#define UVC_CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 +#define UVC_CT_FOCUS_ABSOLUTE_CONTROL 0x06 +#define UVC_CT_FOCUS_RELATIVE_CONTROL 0x07 +#define UVC_CT_FOCUS_AUTO_CONTROL 0x08 +#define UVC_CT_IRIS_ABSOLUTE_CONTROL 0x09 +#define UVC_CT_IRIS_RELATIVE_CONTROL 0x0a +#define UVC_CT_ZOOM_ABSOLUTE_CONTROL 0x0b +#define UVC_CT_ZOOM_RELATIVE_CONTROL 0x0c +#define UVC_CT_PANTILT_ABSOLUTE_CONTROL 0x0d +#define UVC_CT_PANTILT_RELATIVE_CONTROL 0x0e +#define UVC_CT_ROLL_ABSOLUTE_CONTROL 0x0f +#define UVC_CT_ROLL_RELATIVE_CONTROL 0x10 +#define UVC_CT_PRIVACY_CONTROL 0x11 + +/* A.9.5. Processing Unit Control Selectors */ +#define UVC_PU_CONTROL_UNDEFINED 0x00 +#define UVC_PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 +#define UVC_PU_BRIGHTNESS_CONTROL 0x02 +#define UVC_PU_CONTRAST_CONTROL 0x03 +#define UVC_PU_GAIN_CONTROL 0x04 +#define UVC_PU_POWER_LINE_FREQUENCY_CONTROL 0x05 +#define UVC_PU_HUE_CONTROL 0x06 +#define UVC_PU_SATURATION_CONTROL 0x07 +#define UVC_PU_SHARPNESS_CONTROL 0x08 +#define UVC_PU_GAMMA_CONTROL 0x09 +#define UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a +#define UVC_PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b +#define UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c +#define UVC_PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d +#define UVC_PU_DIGITAL_MULTIPLIER_CONTROL 0x0e +#define UVC_PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f +#define UVC_PU_HUE_AUTO_CONTROL 0x10 +#define UVC_PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 +#define UVC_PU_ANALOG_LOCK_STATUS_CONTROL 0x12 + +/* A.9.7. VideoStreaming Interface Control Selectors */ +#define UVC_VS_CONTROL_UNDEFINED 0x00 +#define UVC_VS_PROBE_CONTROL 0x01 +#define UVC_VS_COMMIT_CONTROL 0x02 +#define UVC_VS_STILL_PROBE_CONTROL 0x03 +#define UVC_VS_STILL_COMMIT_CONTROL 0x04 +#define UVC_VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 +#define UVC_VS_STREAM_ERROR_CODE_CONTROL 0x06 +#define UVC_VS_GENERATE_KEY_FRAME_CONTROL 0x07 +#define UVC_VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 +#define UVC_VS_SYNC_DELAY_CONTROL 0x09 + +/* B.1. USB Terminal Types */ +#define UVC_TT_VENDOR_SPECIFIC 0x0100 +#define UVC_TT_STREAMING 0x0101 + +/* B.2. Input Terminal Types */ +#define UVC_ITT_VENDOR_SPECIFIC 0x0200 +#define UVC_ITT_CAMERA 0x0201 +#define UVC_ITT_MEDIA_TRANSPORT_INPUT 0x0202 + +/* B.3. Output Terminal Types */ +#define UVC_OTT_VENDOR_SPECIFIC 0x0300 +#define UVC_OTT_DISPLAY 0x0301 +#define UVC_OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 + +/* B.4. External Terminal Types */ +#define UVC_EXTERNAL_VENDOR_SPECIFIC 0x0400 +#define UVC_COMPOSITE_CONNECTOR 0x0401 +#define UVC_SVIDEO_CONNECTOR 0x0402 +#define UVC_COMPONENT_CONNECTOR 0x0403 + +/* 2.4.2.2. Status Packet Type */ +#define UVC_STATUS_TYPE_CONTROL 1 +#define UVC_STATUS_TYPE_STREAMING 2 + +/* 2.4.3.3. Payload Header Information */ +#define UVC_STREAM_EOH (1 << 7) +#define UVC_STREAM_ERR (1 << 6) +#define UVC_STREAM_STI (1 << 5) +#define UVC_STREAM_RES (1 << 4) +#define UVC_STREAM_SCR (1 << 3) +#define UVC_STREAM_PTS (1 << 2) +#define UVC_STREAM_EOF (1 << 1) +#define UVC_STREAM_FID (1 << 0) + +/* 4.1.2. Control Capabilities */ +#define UVC_CONTROL_CAP_GET (1 << 0) +#define UVC_CONTROL_CAP_SET (1 << 1) +#define UVC_CONTROL_CAP_DISABLED (1 << 2) +#define UVC_CONTROL_CAP_AUTOUPDATE (1 << 3) +#define UVC_CONTROL_CAP_ASYNCHRONOUS (1 << 4) + +/* ------------------------------------------------------------------------ + * UVC structures + */ + +/* All UVC descriptors have these 3 fields at the beginning */ +struct uvc_descriptor_header { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; +} __attribute__((packed)); + +/* 3.7.2. Video Control Interface Header Descriptor */ +struct uvc_header_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u16 bcdUVC; + __u16 wTotalLength; + __u32 dwClockFrequency; + __u8 bInCollection; + __u8 baInterfaceNr[]; +} __attribute__((__packed__)); + +#define UVC_DT_HEADER_SIZE(n) (12+(n)) + +#define UVC_HEADER_DESCRIPTOR(n) \ + uvc_header_descriptor_##n + +#define DECLARE_UVC_HEADER_DESCRIPTOR(n) \ +struct UVC_HEADER_DESCRIPTOR(n) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u16 bcdUVC; \ + __u16 wTotalLength; \ + __u32 dwClockFrequency; \ + __u8 bInCollection; \ + __u8 baInterfaceNr[n]; \ +} __attribute__ ((packed)) + +/* 3.7.2.1. Input Terminal Descriptor */ +struct uvc_input_terminal_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bTerminalID; + __u16 wTerminalType; + __u8 bAssocTerminal; + __u8 iTerminal; +} __attribute__((__packed__)); + +#define UVC_DT_INPUT_TERMINAL_SIZE 8 + +/* 3.7.2.2. Output Terminal Descriptor */ +struct uvc_output_terminal_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bTerminalID; + __u16 wTerminalType; + __u8 bAssocTerminal; + __u8 bSourceID; + __u8 iTerminal; +} __attribute__((__packed__)); + +#define UVC_DT_OUTPUT_TERMINAL_SIZE 9 + +/* 3.7.2.3. Camera Terminal Descriptor */ +struct uvc_camera_terminal_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bTerminalID; + __u16 wTerminalType; + __u8 bAssocTerminal; + __u8 iTerminal; + __u16 wObjectiveFocalLengthMin; + __u16 wObjectiveFocalLengthMax; + __u16 wOcularFocalLength; + __u8 bControlSize; + __u8 bmControls[3]; +} __attribute__((__packed__)); + +#define UVC_DT_CAMERA_TERMINAL_SIZE(n) (15+(n)) + +/* 3.7.2.4. Selector Unit Descriptor */ +struct uvc_selector_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bUnitID; + __u8 bNrInPins; + __u8 baSourceID[0]; + __u8 iSelector; +} __attribute__((__packed__)); + +#define UVC_DT_SELECTOR_UNIT_SIZE(n) (6+(n)) + +#define UVC_SELECTOR_UNIT_DESCRIPTOR(n) \ + uvc_selector_unit_descriptor_##n + +#define DECLARE_UVC_SELECTOR_UNIT_DESCRIPTOR(n) \ +struct UVC_SELECTOR_UNIT_DESCRIPTOR(n) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bUnitID; \ + __u8 bNrInPins; \ + __u8 baSourceID[n]; \ + __u8 iSelector; \ +} __attribute__ ((packed)) + +/* 3.7.2.5. Processing Unit Descriptor */ +struct uvc_processing_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bUnitID; + __u8 bSourceID; + __u16 wMaxMultiplier; + __u8 bControlSize; + __u8 bmControls[2]; + __u8 iProcessing; +} __attribute__((__packed__)); + +#define UVC_DT_PROCESSING_UNIT_SIZE(n) (9+(n)) + +/* 3.7.2.6. Extension Unit Descriptor */ +struct uvc_extension_unit_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bUnitID; + __u8 guidExtensionCode[16]; + __u8 bNumControls; + __u8 bNrInPins; + __u8 baSourceID[0]; + __u8 bControlSize; + __u8 bmControls[0]; + __u8 iExtension; +} __attribute__((__packed__)); + +#define UVC_DT_EXTENSION_UNIT_SIZE(p, n) (24+(p)+(n)) + +#define UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \ + uvc_extension_unit_descriptor_##p_##n + +#define DECLARE_UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \ +struct UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bUnitID; \ + __u8 guidExtensionCode[16]; \ + __u8 bNumControls; \ + __u8 bNrInPins; \ + __u8 baSourceID[p]; \ + __u8 bControlSize; \ + __u8 bmControls[n]; \ + __u8 iExtension; \ +} __attribute__ ((packed)) + +/* 3.8.2.2. Video Control Interrupt Endpoint Descriptor */ +struct uvc_control_endpoint_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u16 wMaxTransferSize; +} __attribute__((__packed__)); + +#define UVC_DT_CONTROL_ENDPOINT_SIZE 5 + +/* 3.9.2.1. Input Header Descriptor */ +struct uvc_input_header_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bNumFormats; + __u16 wTotalLength; + __u8 bEndpointAddress; + __u8 bmInfo; + __u8 bTerminalLink; + __u8 bStillCaptureMethod; + __u8 bTriggerSupport; + __u8 bTriggerUsage; + __u8 bControlSize; + __u8 bmaControls[]; +} __attribute__((__packed__)); + +#define UVC_DT_INPUT_HEADER_SIZE(n, p) (13+(n*p)) + +#define UVC_INPUT_HEADER_DESCRIPTOR(n, p) \ + uvc_input_header_descriptor_##n_##p + +#define DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(n, p) \ +struct UVC_INPUT_HEADER_DESCRIPTOR(n, p) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bNumFormats; \ + __u16 wTotalLength; \ + __u8 bEndpointAddress; \ + __u8 bmInfo; \ + __u8 bTerminalLink; \ + __u8 bStillCaptureMethod; \ + __u8 bTriggerSupport; \ + __u8 bTriggerUsage; \ + __u8 bControlSize; \ + __u8 bmaControls[p][n]; \ +} __attribute__ ((packed)) + +/* 3.9.2.2. Output Header Descriptor */ +struct uvc_output_header_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bNumFormats; + __u16 wTotalLength; + __u8 bEndpointAddress; + __u8 bTerminalLink; + __u8 bControlSize; + __u8 bmaControls[]; +} __attribute__((__packed__)); + +#define UVC_DT_OUTPUT_HEADER_SIZE(n, p) (9+(n*p)) + +#define UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \ + uvc_output_header_descriptor_##n_##p + +#define DECLARE_UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \ +struct UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bNumFormats; \ + __u16 wTotalLength; \ + __u8 bEndpointAddress; \ + __u8 bTerminalLink; \ + __u8 bControlSize; \ + __u8 bmaControls[p][n]; \ +} __attribute__ ((packed)) + +/* 3.9.2.6. Color matching descriptor */ +struct uvc_color_matching_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bColorPrimaries; + __u8 bTransferCharacteristics; + __u8 bMatrixCoefficients; +} __attribute__((__packed__)); + +#define UVC_DT_COLOR_MATCHING_SIZE 6 + +/* 4.3.1.1. Video Probe and Commit Controls */ +struct uvc_streaming_control { + __u16 bmHint; + __u8 bFormatIndex; + __u8 bFrameIndex; + __u32 dwFrameInterval; + __u16 wKeyFrameRate; + __u16 wPFrameRate; + __u16 wCompQuality; + __u16 wCompWindowSize; + __u16 wDelay; + __u32 dwMaxVideoFrameSize; + __u32 dwMaxPayloadTransferSize; + __u32 dwClockFrequency; + __u8 bmFramingInfo; + __u8 bPreferedVersion; + __u8 bMinVersion; + __u8 bMaxVersion; +} __attribute__((__packed__)); + +/* Uncompressed Payload - 3.1.1. Uncompressed Video Format Descriptor */ +struct uvc_format_uncompressed { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bFormatIndex; + __u8 bNumFrameDescriptors; + __u8 guidFormat[16]; + __u8 bBitsPerPixel; + __u8 bDefaultFrameIndex; + __u8 bAspectRatioX; + __u8 bAspectRatioY; + __u8 bmInterfaceFlags; + __u8 bCopyProtect; +} __attribute__((__packed__)); + +#define UVC_DT_FORMAT_UNCOMPRESSED_SIZE 27 + +/* Uncompressed Payload - 3.1.2. Uncompressed Video Frame Descriptor */ +struct uvc_frame_uncompressed { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bFrameIndex; + __u8 bmCapabilities; + __u16 wWidth; + __u16 wHeight; + __u32 dwMinBitRate; + __u32 dwMaxBitRate; + __u32 dwMaxVideoFrameBufferSize; + __u32 dwDefaultFrameInterval; + __u8 bFrameIntervalType; + __u32 dwFrameInterval[]; +} __attribute__((__packed__)); + +#define UVC_DT_FRAME_UNCOMPRESSED_SIZE(n) (26+4*(n)) + +#define UVC_FRAME_UNCOMPRESSED(n) \ + uvc_frame_uncompressed_##n + +#define DECLARE_UVC_FRAME_UNCOMPRESSED(n) \ +struct UVC_FRAME_UNCOMPRESSED(n) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bFrameIndex; \ + __u8 bmCapabilities; \ + __u16 wWidth; \ + __u16 wHeight; \ + __u32 dwMinBitRate; \ + __u32 dwMaxBitRate; \ + __u32 dwMaxVideoFrameBufferSize; \ + __u32 dwDefaultFrameInterval; \ + __u8 bFrameIntervalType; \ + __u32 dwFrameInterval[n]; \ +} __attribute__ ((packed)) + +/* MJPEG Payload - 3.1.1. MJPEG Video Format Descriptor */ +struct uvc_format_mjpeg { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bFormatIndex; + __u8 bNumFrameDescriptors; + __u8 bmFlags; + __u8 bDefaultFrameIndex; + __u8 bAspectRatioX; + __u8 bAspectRatioY; + __u8 bmInterfaceFlags; + __u8 bCopyProtect; +} __attribute__((__packed__)); + +#define UVC_DT_FORMAT_MJPEG_SIZE 11 + +/* MJPEG Payload - 3.1.2. MJPEG Video Frame Descriptor */ +struct uvc_frame_mjpeg { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + __u8 bFrameIndex; + __u8 bmCapabilities; + __u16 wWidth; + __u16 wHeight; + __u32 dwMinBitRate; + __u32 dwMaxBitRate; + __u32 dwMaxVideoFrameBufferSize; + __u32 dwDefaultFrameInterval; + __u8 bFrameIntervalType; + __u32 dwFrameInterval[]; +} __attribute__((__packed__)); + +#define UVC_DT_FRAME_MJPEG_SIZE(n) (26+4*(n)) + +#define UVC_FRAME_MJPEG(n) \ + uvc_frame_mjpeg_##n + +#define DECLARE_UVC_FRAME_MJPEG(n) \ +struct UVC_FRAME_MJPEG(n) { \ + __u8 bLength; \ + __u8 bDescriptorType; \ + __u8 bDescriptorSubType; \ + __u8 bFrameIndex; \ + __u8 bmCapabilities; \ + __u16 wWidth; \ + __u16 wHeight; \ + __u32 dwMinBitRate; \ + __u32 dwMaxBitRate; \ + __u32 dwMaxVideoFrameBufferSize; \ + __u32 dwDefaultFrameInterval; \ + __u8 bFrameIntervalType; \ + __u32 dwFrameInterval[n]; \ +} __attribute__ ((packed)) + +#endif /* __LINUX_USB_VIDEO_H */ + -- cgit v1.2.3-70-g09d2 From aa9660196b250b850c9d06046c9f3b1eb965a708 Mon Sep 17 00:00:00 2001 From: Carlos Maiolino Date: Mon, 1 Oct 2012 16:50:54 -0300 Subject: ext3: fix possible non-initialized variable on htree_dirblock_to_tree() This is a backport of ext4 commit 90b0a9732 which fixes a possible non-initialized variable on htree_dirblock_to_tree(). Ext3 has the same non initialized variable, but, in any case it will be initialized by ext3_get_blocks_handle(), which will avoid the bug to be triggered, but, the non-initialized variable by htree_dirblock_to_tree() is still a bug. Signed-off-by: Carlos Maiolino Signed-off-by: Jan Kara --- fs/ext3/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 8f4fddac01a..7f6c9384ee7 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -559,7 +559,7 @@ static int htree_dirblock_to_tree(struct file *dir_file, { struct buffer_head *bh; struct ext3_dir_entry_2 *de, *top; - int err, count = 0; + int err = 0, count = 0; dxtrace(printk("In htree dirblock_to_tree: block %d\n", block)); if (!(bh = ext3_bread (NULL, dir, block, 0, &err))) -- cgit v1.2.3-70-g09d2 From c3d59ad6ab0b3d01c10f326bbc9b089424a3a5c4 Mon Sep 17 00:00:00 2001 From: Carlos Maiolino Date: Tue, 2 Oct 2012 23:59:23 -0300 Subject: ext3: ext3_bread usage audit This is the ext3 version of the same patch applied to Ext4, where such goal is to audit the usage of ext3_bread() due a possible misinterpretion of its return value. Focused on directory blocks, a NULL value returned from ext3_bread() means a hole, which cannot exist into a directory inode. It can pass undetected after a fix in an uninitialized error variable. The (now) initialized variable into ext3_getblk() may lead to a zero'ed return value of ext3_bread() to its callers, which can make the caller do not detect the hole in the directory inode. This patch creates a new wrapper function ext3_dir_bread() which checks for holes properly, reports error, and returns EIO in that case. Signed-off-by: Carlos Maiolino Signed-off-by: Jan Kara --- fs/ext3/namei.c | 38 ++++++++++++++++++++------------------ fs/ext3/namei.h | 19 +++++++++++++++++++ 2 files changed, 39 insertions(+), 18 deletions(-) diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 7f6c9384ee7..890b8947c54 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -46,8 +46,7 @@ static struct buffer_head *ext3_append(handle_t *handle, *block = inode->i_size >> inode->i_sb->s_blocksize_bits; - bh = ext3_bread(handle, inode, *block, 1, err); - if (bh) { + if ((bh = ext3_dir_bread(handle, inode, *block, 1, err))) { inode->i_size += inode->i_sb->s_blocksize; EXT3_I(inode)->i_disksize = inode->i_size; *err = ext3_journal_get_write_access(handle, bh); @@ -339,8 +338,10 @@ dx_probe(struct qstr *entry, struct inode *dir, u32 hash; frame->bh = NULL; - if (!(bh = ext3_bread (NULL,dir, 0, 0, err))) + if (!(bh = ext3_dir_bread(NULL, dir, 0, 0, err))) { + *err = ERR_BAD_DX_DIR; goto fail; + } root = (struct dx_root *) bh->b_data; if (root->info.hash_version != DX_HASH_TEA && root->info.hash_version != DX_HASH_HALF_MD4 && @@ -436,8 +437,10 @@ dx_probe(struct qstr *entry, struct inode *dir, frame->entries = entries; frame->at = at; if (!indirect--) return frame; - if (!(bh = ext3_bread (NULL,dir, dx_get_block(at), 0, err))) + if (!(bh = ext3_dir_bread(NULL, dir, dx_get_block(at), 0, err))) { + *err = ERR_BAD_DX_DIR; goto fail2; + } at = entries = ((struct dx_node *) bh->b_data)->entries; if (dx_get_limit(entries) != dx_node_limit (dir)) { ext3_warning(dir->i_sb, __func__, @@ -535,8 +538,8 @@ static int ext3_htree_next_block(struct inode *dir, __u32 hash, * block so no check is necessary */ while (num_frames--) { - if (!(bh = ext3_bread(NULL, dir, dx_get_block(p->at), - 0, &err))) + if (!(bh = ext3_dir_bread(NULL, dir, dx_get_block(p->at), + 0, &err))) return err; /* Failure */ p++; brelse (p->bh); @@ -562,7 +565,8 @@ static int htree_dirblock_to_tree(struct file *dir_file, int err = 0, count = 0; dxtrace(printk("In htree dirblock_to_tree: block %d\n", block)); - if (!(bh = ext3_bread (NULL, dir, block, 0, &err))) + + if (!(bh = ext3_dir_bread(NULL, dir, block, 0, &err))) return err; de = (struct ext3_dir_entry_2 *) bh->b_data; @@ -976,7 +980,7 @@ static struct buffer_head * ext3_dx_find_entry(struct inode *dir, return NULL; do { block = dx_get_block(frame->at); - if (!(bh = ext3_bread (NULL,dir, block, 0, err))) + if (!(bh = ext3_dir_bread (NULL, dir, block, 0, err))) goto errout; retval = search_dirblock(bh, dir, entry, @@ -1458,9 +1462,9 @@ static int ext3_add_entry (handle_t *handle, struct dentry *dentry, } blocks = dir->i_size >> sb->s_blocksize_bits; for (block = 0; block < blocks; block++) { - bh = ext3_bread(handle, dir, block, 0, &retval); - if(!bh) + if (!(bh = ext3_dir_bread(handle, dir, block, 0, &retval))) return retval; + retval = add_dirent_to_buf(handle, dentry, inode, NULL, bh); if (retval != -ENOSPC) return retval; @@ -1500,7 +1504,7 @@ static int ext3_dx_add_entry(handle_t *handle, struct dentry *dentry, entries = frame->entries; at = frame->at; - if (!(bh = ext3_bread(handle,dir, dx_get_block(frame->at), 0, &err))) + if (!(bh = ext3_dir_bread(handle, dir, dx_get_block(frame->at), 0, &err))) goto cleanup; BUFFER_TRACE(bh, "get_write_access"); @@ -1790,8 +1794,7 @@ retry: inode->i_op = &ext3_dir_inode_operations; inode->i_fop = &ext3_dir_operations; inode->i_size = EXT3_I(inode)->i_disksize = inode->i_sb->s_blocksize; - dir_block = ext3_bread (handle, inode, 0, 1, &err); - if (!dir_block) + if (!(dir_block = ext3_dir_bread(handle, inode, 0, 1, &err))) goto out_clear_inode; BUFFER_TRACE(dir_block, "get_write_access"); @@ -1859,7 +1862,7 @@ static int empty_dir (struct inode * inode) sb = inode->i_sb; if (inode->i_size < EXT3_DIR_REC_LEN(1) + EXT3_DIR_REC_LEN(2) || - !(bh = ext3_bread (NULL, inode, 0, 0, &err))) { + !(bh = ext3_dir_bread(NULL, inode, 0, 0, &err))) { if (err) ext3_error(inode->i_sb, __func__, "error %d reading directory #%lu offset 0", @@ -1890,9 +1893,8 @@ static int empty_dir (struct inode * inode) (void *) de >= (void *) (bh->b_data+sb->s_blocksize)) { err = 0; brelse (bh); - bh = ext3_bread (NULL, inode, - offset >> EXT3_BLOCK_SIZE_BITS(sb), 0, &err); - if (!bh) { + if (!(bh = ext3_dir_bread (NULL, inode, + offset >> EXT3_BLOCK_SIZE_BITS(sb), 0, &err))) { if (err) ext3_error(sb, __func__, "error %d reading directory" @@ -2388,7 +2390,7 @@ static int ext3_rename (struct inode * old_dir, struct dentry *old_dentry, goto end_rename; } retval = -EIO; - dir_bh = ext3_bread (handle, old_inode, 0, 0, &retval); + dir_bh = ext3_dir_bread(handle, old_inode, 0, 0, &retval); if (!dir_bh) goto end_rename; if (le32_to_cpu(PARENT_INO(dir_bh->b_data)) != old_dir->i_ino) diff --git a/fs/ext3/namei.h b/fs/ext3/namei.h index f2ce2b0065c..46304d8c9f0 100644 --- a/fs/ext3/namei.h +++ b/fs/ext3/namei.h @@ -6,3 +6,22 @@ */ extern struct dentry *ext3_get_parent(struct dentry *child); + +static inline struct buffer_head *ext3_dir_bread(handle_t *handle, + struct inode *inode, + int block, int create, + int *err) +{ + struct buffer_head *bh; + + bh = ext3_bread(handle, inode, block, create, err); + + if (!bh && !(*err)) { + *err = -EIO; + ext3_error(inode->i_sb, __func__, + "Directory hole detected on inode %lu\n", + inode->i_ino); + return NULL; + } + return bh; +} -- cgit v1.2.3-70-g09d2 From ae2cf4284e198684cad8f654923dd8062ee46f88 Mon Sep 17 00:00:00 2001 From: Zhao Hongjiang Date: Tue, 9 Oct 2012 13:44:36 +0800 Subject: ext2: fix return values on parse_options() failure parse_options() in ext2 should return 0 when parse the mount options fails. Signed-off-by: Zhao Hongjiang Reviewed-by: Lukas Czerner Signed-off-by: Jan Kara --- fs/ext2/super.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ext2/super.c b/fs/ext2/super.c index 6c205d0c565..fa04d023177 100644 --- a/fs/ext2/super.c +++ b/fs/ext2/super.c @@ -469,7 +469,7 @@ static int parse_options(char *options, struct super_block *sb) uid = make_kuid(current_user_ns(), option); if (!uid_valid(uid)) { ext2_msg(sb, KERN_ERR, "Invalid uid value %d", option); - return -1; + return 0; } sbi->s_resuid = uid; @@ -480,7 +480,7 @@ static int parse_options(char *options, struct super_block *sb) gid = make_kgid(current_user_ns(), option); if (!gid_valid(gid)) { ext2_msg(sb, KERN_ERR, "Invalid gid value %d", option); - return -1; + return 0; } sbi->s_resgid = gid; break; -- cgit v1.2.3-70-g09d2 From 66415f6b50f5bcbc56c78df54aacee73f3d03a3d Mon Sep 17 00:00:00 2001 From: Zhao Hongjiang Date: Tue, 9 Oct 2012 13:48:47 +0800 Subject: ext3: fix return values on parse_options() failure parse_options() in ext3 should return 0 when parse the mount options fails. Signed-off-by: Zhao Hongjiang Reviewed-by: Lukas Czerner Signed-off-by: Jan Kara --- fs/ext3/super.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 17ae5c83d23..ebf8312c3a4 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -1001,7 +1001,7 @@ static int parse_options (char *options, struct super_block *sb, uid = make_kuid(current_user_ns(), option); if (!uid_valid(uid)) { ext3_msg(sb, KERN_ERR, "Invalid uid value %d", option); - return -1; + return 0; } sbi->s_resuid = uid; @@ -1012,7 +1012,7 @@ static int parse_options (char *options, struct super_block *sb, gid = make_kgid(current_user_ns(), option); if (!gid_valid(gid)) { ext3_msg(sb, KERN_ERR, "Invalid gid value %d", option); - return -1; + return 0; } sbi->s_resgid = gid; break; -- cgit v1.2.3-70-g09d2 From 6c29c50fda25c2ac2ce45a9b042ff7e424aa8eac Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 9 Oct 2012 23:30:17 +0200 Subject: quota: Silence warning about PRJQUOTA not being handled in need_print_warning() PRJQUOTA value of quota type should never reach need_print_warning() since XFS (which is the only fs which uses that type) doesn't use generic functions calling this function. Anyway, add PRJQUOTA case to the switch to make gcc happy. Signed-off-by: Jan Kara --- fs/quota/dquot.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index 557a9c20a21..05ae3c97f7a 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -1160,6 +1160,8 @@ static int need_print_warning(struct dquot_warn *warn) return uid_eq(current_fsuid(), warn->w_dq_id.uid); case GRPQUOTA: return in_group_p(warn->w_dq_id.gid); + case PRJQUOTA: /* Never taken... Just make gcc happy */ + return 0; } return 0; } -- cgit v1.2.3-70-g09d2 From c7c0f2cdef1362c5fe301a1ffa8379824ee3f813 Mon Sep 17 00:00:00 2001 From: Ashish Chavan Date: Thu, 11 Oct 2012 14:04:37 +0530 Subject: ASoC: codecs: da9055: Minor improvement in ALC calibration process This patch slightly improves ALC calibration process of da9055 codec driver by muting Mic PGAs during calibration. Signed-off-by: Ashish Chavan Signed-off-by: David Dajun Chen Signed-off-by: Mark Brown --- sound/soc/codecs/da9055.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/da9055.c b/sound/soc/codecs/da9055.c index 185d8dd3639..f379b085c39 100644 --- a/sound/soc/codecs/da9055.c +++ b/sound/soc/codecs/da9055.c @@ -178,6 +178,12 @@ #define DA9055_AIF_WORD_S24_LE (2 << 2) #define DA9055_AIF_WORD_S32_LE (3 << 2) +/* MIC_L_CTRL bit fields */ +#define DA9055_MIC_L_MUTE_EN (1 << 6) + +/* MIC_R_CTRL bit fields */ +#define DA9055_MIC_R_MUTE_EN (1 << 6) + /* MIXIN_L_CTRL bit fields */ #define DA9055_MIXIN_L_MIX_EN (1 << 3) @@ -476,7 +482,7 @@ static int da9055_put_alc_sw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); - u8 reg_val, adc_left, adc_right; + u8 reg_val, adc_left, adc_right, mic_left, mic_right; int avg_left_data, avg_right_data, offset_l, offset_r; if (ucontrol->value.integer.value[0]) { @@ -485,6 +491,16 @@ static int da9055_put_alc_sw(struct snd_kcontrol *kcontrol, * offsets must be done first */ + /* Save current values from Mic control registers */ + mic_left = snd_soc_read(codec, DA9055_MIC_L_CTRL); + mic_right = snd_soc_read(codec, DA9055_MIC_R_CTRL); + + /* Mute Mic PGA Left and Right */ + snd_soc_update_bits(codec, DA9055_MIC_L_CTRL, + DA9055_MIC_L_MUTE_EN, DA9055_MIC_L_MUTE_EN); + snd_soc_update_bits(codec, DA9055_MIC_R_CTRL, + DA9055_MIC_R_MUTE_EN, DA9055_MIC_R_MUTE_EN); + /* Save current values from ADC control registers */ adc_left = snd_soc_read(codec, DA9055_ADC_L_CTRL); adc_right = snd_soc_read(codec, DA9055_ADC_R_CTRL); @@ -520,6 +536,10 @@ static int da9055_put_alc_sw(struct snd_kcontrol *kcontrol, /* Restore original values of ADC control registers */ snd_soc_write(codec, DA9055_ADC_L_CTRL, adc_left); snd_soc_write(codec, DA9055_ADC_R_CTRL, adc_right); + + /* Restore original values of Mic control registers */ + snd_soc_write(codec, DA9055_MIC_L_CTRL, mic_left); + snd_soc_write(codec, DA9055_MIC_R_CTRL, mic_right); } return snd_soc_put_volsw(kcontrol, ucontrol); -- cgit v1.2.3-70-g09d2 From 26b6e44afb58432a5e998da0343757404f9de9ee Mon Sep 17 00:00:00 2001 From: Kenneth Graunke Date: Sun, 7 Oct 2012 08:51:07 -0700 Subject: drm/i915: Set guardband clipping workaround bit in the right register. A previous patch, namely: commit bf97b276ca04cee9ab65ffd378fa8e6aedd71ff6 Author: Daniel Vetter Date: Wed Apr 11 20:42:41 2012 +0200 drm/i915: implement w/a for incorrect guarband clipping accidentally set bit 5 in 3D_CHICKEN, which has nothing to do with clipping. This patch changes it to be set in 3D_CHICKEN3, where it belongs. The game "Dante" demonstrates random clipping issues when guardband clipping is enabled and bit 5 of 3D_CHICKEN3 isn't set. So the workaround is actually necessary. Cc: Daniel Vetter Cc: Oliver McFadden Acked-by: Paul Menzel Signed-off-by: Kenneth Graunke Reviewed-by: Mika Kuoppala Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 2 +- drivers/gpu/drm/i915/intel_pm.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 64c1be0a9cf..a4162ddff6c 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -521,7 +521,7 @@ */ # define _3D_CHICKEN2_WM_READ_PIPELINED (1 << 14) #define _3D_CHICKEN3 0x02090 -#define _3D_CHICKEN_SF_DISABLE_FASTCLIP_CULL (1 << 5) +#define _3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL (1 << 5) #define MI_MODE 0x0209c # define VS_TIMER_DISPATCH (1 << 6) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index b3b4b6cea8b..72f41aaa71f 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3442,8 +3442,8 @@ static void gen6_init_clock_gating(struct drm_device *dev) GEN6_RCCUNIT_CLOCK_GATE_DISABLE); /* Bspec says we need to always set all mask bits. */ - I915_WRITE(_3D_CHICKEN, (0xFFFF << 16) | - _3D_CHICKEN_SF_DISABLE_FASTCLIP_CULL); + I915_WRITE(_3D_CHICKEN3, (0xFFFF << 16) | + _3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL); /* * According to the spec the following bits should be -- cgit v1.2.3-70-g09d2 From acb868d3d710b09a356d848e0cd44d9713a9e274 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 26 Sep 2012 13:47:30 +0100 Subject: drm/i915: Disallow preallocation of requests The intention was to allow the caller to avoid a failure to queue a request having already written commands to the ring. However, this is a moot point as the i915_add_request() can fail for other reasons than a mere allocation failure and those failure cases are more likely than ENOMEM. So the overlay code already had to handle i915_add_request() failures, and due to commit 3bb73aba1ed5198a2c1dfaac4f3c95459930d84a Author: Chris Wilson Date: Fri Jul 20 12:40:59 2012 +0100 drm/i915: Allow late allocation of request for i915_add_request() the error handling code in intel_overlay.c was subject to causing double-frees, as found by coverity. Rather than further complicate i915_add_request() and callers, realise the battle is lost and adapt intel_overlay.c to take advantage of the late allocation of requests. v2: Handle callers passing in a NULL seqno. v3: Ditto. This time for sure. Signed-off-by: Chris Wilson Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 2 +- drivers/gpu/drm/i915/i915_gem.c | 15 ++++---- drivers/gpu/drm/i915/intel_overlay.c | 72 ++++++++---------------------------- 3 files changed, 24 insertions(+), 65 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 4f2831aa5fe..d5138c3a156 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1427,7 +1427,7 @@ int __must_check i915_gpu_idle(struct drm_device *dev); int __must_check i915_gem_idle(struct drm_device *dev); int i915_add_request(struct intel_ring_buffer *ring, struct drm_file *file, - struct drm_i915_gem_request *request); + u32 *seqno); int __must_check i915_wait_seqno(struct intel_ring_buffer *ring, uint32_t seqno); int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 53de95c05b1..04b0c070cdf 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1956,11 +1956,12 @@ i915_gem_next_request_seqno(struct intel_ring_buffer *ring) int i915_add_request(struct intel_ring_buffer *ring, struct drm_file *file, - struct drm_i915_gem_request *request) + u32 *out_seqno) { drm_i915_private_t *dev_priv = ring->dev->dev_private; - uint32_t seqno; + struct drm_i915_gem_request *request; u32 request_ring_position; + u32 seqno; int was_empty; int ret; @@ -1975,11 +1976,9 @@ i915_add_request(struct intel_ring_buffer *ring, if (ret) return ret; - if (request == NULL) { - request = kmalloc(sizeof(*request), GFP_KERNEL); - if (request == NULL) - return -ENOMEM; - } + request = kmalloc(sizeof(*request), GFP_KERNEL); + if (request == NULL) + return -ENOMEM; seqno = i915_gem_next_request_seqno(ring); @@ -2031,6 +2030,8 @@ i915_add_request(struct intel_ring_buffer *ring, } } + if (out_seqno) + *out_seqno = seqno; return 0; } diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c index afd0f30ab88..555912f510a 100644 --- a/drivers/gpu/drm/i915/intel_overlay.c +++ b/drivers/gpu/drm/i915/intel_overlay.c @@ -210,7 +210,6 @@ static void intel_overlay_unmap_regs(struct intel_overlay *overlay, } static int intel_overlay_do_wait_request(struct intel_overlay *overlay, - struct drm_i915_gem_request *request, void (*tail)(struct intel_overlay *)) { struct drm_device *dev = overlay->dev; @@ -219,12 +218,10 @@ static int intel_overlay_do_wait_request(struct intel_overlay *overlay, int ret; BUG_ON(overlay->last_flip_req); - ret = i915_add_request(ring, NULL, request); - if (ret) { - kfree(request); - return ret; - } - overlay->last_flip_req = request->seqno; + ret = i915_add_request(ring, NULL, &overlay->last_flip_req); + if (ret) + return ret; + overlay->flip_tail = tail; ret = i915_wait_seqno(ring, overlay->last_flip_req); if (ret) @@ -241,7 +238,6 @@ static int intel_overlay_on(struct intel_overlay *overlay) struct drm_device *dev = overlay->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_ring_buffer *ring = &dev_priv->ring[RCS]; - struct drm_i915_gem_request *request; int ret; BUG_ON(overlay->active); @@ -249,17 +245,9 @@ static int intel_overlay_on(struct intel_overlay *overlay) WARN_ON(IS_I830(dev) && !(dev_priv->quirks & QUIRK_PIPEA_FORCE)); - request = kzalloc(sizeof(*request), GFP_KERNEL); - if (request == NULL) { - ret = -ENOMEM; - goto out; - } - ret = intel_ring_begin(ring, 4); - if (ret) { - kfree(request); - goto out; - } + if (ret) + return ret; intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_ON); intel_ring_emit(ring, overlay->flip_addr | OFC_UPDATE); @@ -267,9 +255,7 @@ static int intel_overlay_on(struct intel_overlay *overlay) intel_ring_emit(ring, MI_NOOP); intel_ring_advance(ring); - ret = intel_overlay_do_wait_request(overlay, request, NULL); -out: - return ret; + return intel_overlay_do_wait_request(overlay, NULL); } /* overlay needs to be enabled in OCMD reg */ @@ -279,17 +265,12 @@ static int intel_overlay_continue(struct intel_overlay *overlay, struct drm_device *dev = overlay->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct intel_ring_buffer *ring = &dev_priv->ring[RCS]; - struct drm_i915_gem_request *request; u32 flip_addr = overlay->flip_addr; u32 tmp; int ret; BUG_ON(!overlay->active); - request = kzalloc(sizeof(*request), GFP_KERNEL); - if (request == NULL) - return -ENOMEM; - if (load_polyphase_filter) flip_addr |= OFC_UPDATE; @@ -299,22 +280,14 @@ static int intel_overlay_continue(struct intel_overlay *overlay, DRM_DEBUG("overlay underrun, DOVSTA: %x\n", tmp); ret = intel_ring_begin(ring, 2); - if (ret) { - kfree(request); + if (ret) return ret; - } + intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_CONTINUE); intel_ring_emit(ring, flip_addr); intel_ring_advance(ring); - ret = i915_add_request(ring, NULL, request); - if (ret) { - kfree(request); - return ret; - } - - overlay->last_flip_req = request->seqno; - return 0; + return i915_add_request(ring, NULL, &overlay->last_flip_req); } static void intel_overlay_release_old_vid_tail(struct intel_overlay *overlay) @@ -350,15 +323,10 @@ static int intel_overlay_off(struct intel_overlay *overlay) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_ring_buffer *ring = &dev_priv->ring[RCS]; u32 flip_addr = overlay->flip_addr; - struct drm_i915_gem_request *request; int ret; BUG_ON(!overlay->active); - request = kzalloc(sizeof(*request), GFP_KERNEL); - if (request == NULL) - return -ENOMEM; - /* According to intel docs the overlay hw may hang (when switching * off) without loading the filter coeffs. It is however unclear whether * this applies to the disabling of the overlay or to the switching off @@ -366,10 +334,9 @@ static int intel_overlay_off(struct intel_overlay *overlay) flip_addr |= OFC_UPDATE; ret = intel_ring_begin(ring, 6); - if (ret) { - kfree(request); + if (ret) return ret; - } + /* wait for overlay to go idle */ intel_ring_emit(ring, MI_OVERLAY_FLIP | MI_OVERLAY_CONTINUE); intel_ring_emit(ring, flip_addr); @@ -380,8 +347,7 @@ static int intel_overlay_off(struct intel_overlay *overlay) intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); intel_ring_advance(ring); - return intel_overlay_do_wait_request(overlay, request, - intel_overlay_off_tail); + return intel_overlay_do_wait_request(overlay, intel_overlay_off_tail); } /* recover from an interruption due to a signal @@ -426,24 +392,16 @@ static int intel_overlay_release_old_vid(struct intel_overlay *overlay) return 0; if (I915_READ(ISR) & I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT) { - struct drm_i915_gem_request *request; - /* synchronous slowpath */ - request = kzalloc(sizeof(*request), GFP_KERNEL); - if (request == NULL) - return -ENOMEM; - ret = intel_ring_begin(ring, 2); - if (ret) { - kfree(request); + if (ret) return ret; - } intel_ring_emit(ring, MI_WAIT_FOR_EVENT | MI_WAIT_FOR_OVERLAY_FLIP); intel_ring_emit(ring, MI_NOOP); intel_ring_advance(ring); - ret = intel_overlay_do_wait_request(overlay, request, + ret = intel_overlay_do_wait_request(overlay, intel_overlay_release_old_vid_tail); if (ret) return ret; -- cgit v1.2.3-70-g09d2 From 1cf8378906b2d5a6449147914fe04c56d6f4fd87 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 10 Oct 2012 12:11:52 +0100 Subject: drm/i915: fixup i915_gem_object_get_page inline helper Note that just because we have n == MAX elements left, does not imply that there are only MAX elements left in the scatterlist and so we may not be on the last chain, and the nth element may in fact be a chain ptr. This is exercised by the improved hangman tests and the gem_exec_big test in i-g-t. This regression has been introduced in commit 9da3da660d8c19a54f6e93361d147509be3fff84 Author: Chris Wilson Date: Fri Jun 1 15:20:22 2012 +0100 drm/i915: Replace the array of pages with a scatterlist v2: KISS, replace the direct lookup with a for_each_sg() [danvet] v3: Try to be clever again. Signed-off-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d5138c3a156..b84f7861e43 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1341,9 +1341,14 @@ int __must_check i915_gem_object_get_pages(struct drm_i915_gem_object *obj); static inline struct page *i915_gem_object_get_page(struct drm_i915_gem_object *obj, int n) { struct scatterlist *sg = obj->pages->sgl; - while (n >= SG_MAX_SINGLE_ALLOC) { + int nents = obj->pages->nents; + while (nents > SG_MAX_SINGLE_ALLOC) { + if (n < SG_MAX_SINGLE_ALLOC - 1) + break; + sg = sg_chain_ptr(sg + SG_MAX_SINGLE_ALLOC - 1); n -= SG_MAX_SINGLE_ALLOC - 1; + nents -= SG_MAX_SINGLE_ALLOC - 1; } return sg_page(sg+n); } -- cgit v1.2.3-70-g09d2 From 9169d3a88072b20f42e68a946e916bd7dfbc7f2c Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 10 Oct 2012 23:14:01 +0200 Subject: drm/i915: disable wc gtt pte mappings on gen2 It doesn't work since the gtt pte range sits in the middle of the mmio bar. We didn't notice that since both my and Chris' gen2 machines don't support PAT and hence all wc io mapping request will automatically be demoted to uc. This regression has been introduce in commit edef7e685da05c13cce50c0126189c80fe2c8f71 Author: Chris Wilson Date: Fri Sep 14 11:57:47 2012 +0100 agp/intel: Use a write-combining map for updating PTEs Reported-by: Egbert Eich Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55834 Acked-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/char/agp/intel-gtt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index e01f5eaaec8..38390f7c6ab 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -667,7 +667,7 @@ static int intel_gtt_init(void) gtt_map_size = intel_private.base.gtt_total_entries * 4; intel_private.gtt = NULL; - if (INTEL_GTT_GEN < 6) + if (INTEL_GTT_GEN < 6 && INTEL_GTT_GEN > 2) intel_private.gtt = ioremap_wc(intel_private.gtt_bus_addr, gtt_map_size); if (intel_private.gtt == NULL) -- cgit v1.2.3-70-g09d2 From ccd0d36e2a8ab8b4d314ff87779366ada33ffe00 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 10 Oct 2012 23:13:59 +0200 Subject: drm/i915: rip out the pipe A quirk for i855gm This seems to be the root-cause that breaks resume on my i855gm when I apply the "drm/i915: fixup the plane->pipe fixup code" patch. And that code doesn't even run on my machine, so it's pure timing changes causing the regression. Furthermore resume has been constantly switching between working and broken on this machine ever since kms support has been merged, seemingly with no related change as a root cause. And always with the same symptoms of the backlight lighting up, but the lvds panel only displaying black. Also, of both i855gm variants only one is in the table. And in the past we've only ever removed entries from this quirk table because it breaks things. So let's just remove it - in case there's indeed a bios out there relying on a running pipe A, we can add back in a more precise quirk entry, like all the others (save for i830/i845). Tested-by: Chris Wilson #855gm Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 9cecfd73b0b..f3b2d18482d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7902,8 +7902,7 @@ static struct intel_quirk intel_quirks[] = { /* ThinkPad T60 needs pipe A force quirk (bug #16494) */ { 0x2782, 0x17aa, 0x201a, quirk_pipea_force }, - /* 855 & before need to leave pipe A & dpll A up */ - { 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, + /* 830/845 need to leave pipe A & dpll A up */ { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, -- cgit v1.2.3-70-g09d2 From fa55583797d12b10928a1813f3dcf066637caf5e Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 10 Oct 2012 23:14:00 +0200 Subject: drm/i915: fixup the plane->pipe fixup code We need to check whether the _other plane is on our pipe, not whether our plane is on the other pipe. Otherwise if not both pipes/planes are active, we won't properly clean up the mess and set up our desired plane->pipe mapping. v2: Fixup the logic, I've totally fumbled it. Noticed by Chris Wilson. v3: I've checked Bspec, and the flexible plane->pipe mapping is a gen2/3 feature, so test for that instead of PCH_SPLIT v4: Check whether we indeed have 2 pipes before checking the other pipe, to avoid upsetting i845g/i865g. Noticed by Chris Wilson. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51265 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49838 Tested-by: Dave Airlie Tested-by: Chris Wilson #855gm Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 34 +++++++++++++++++++++++----------- 1 file changed, 23 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f3b2d18482d..3511effa01e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8058,29 +8058,42 @@ static void intel_enable_pipe_a(struct drm_device *dev) } +static bool +intel_check_plane_mapping(struct intel_crtc *crtc) +{ + struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; + u32 reg, val; + + if (dev_priv->num_pipe == 1) + return true; + + reg = DSPCNTR(!crtc->plane); + val = I915_READ(reg); + + if ((val & DISPLAY_PLANE_ENABLE) && + (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe)) + return false; + + return true; +} + static void intel_sanitize_crtc(struct intel_crtc *crtc) { struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 reg, val; + u32 reg; /* Clear any frame start delays used for debugging left by the BIOS */ reg = PIPECONF(crtc->pipe); I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK); /* We need to sanitize the plane -> pipe mapping first because this will - * disable the crtc (and hence change the state) if it is wrong. */ - if (!HAS_PCH_SPLIT(dev)) { + * disable the crtc (and hence change the state) if it is wrong. Note + * that gen4+ has a fixed plane -> pipe mapping. */ + if (INTEL_INFO(dev)->gen < 4 && !intel_check_plane_mapping(crtc)) { struct intel_connector *connector; bool plane; - reg = DSPCNTR(crtc->plane); - val = I915_READ(reg); - - if ((val & DISPLAY_PLANE_ENABLE) == 0 && - (!!(val & DISPPLANE_SEL_PIPE_MASK) == crtc->pipe)) - goto ok; - DRM_DEBUG_KMS("[CRTC:%d] wrong plane connection detected!\n", crtc->base.base.id); @@ -8104,7 +8117,6 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) WARN_ON(crtc->active); crtc->base.enabled = false; } -ok: if (dev_priv->quirks & QUIRK_PIPEA_FORCE && crtc->pipe == PIPE_A && !crtc->active) { -- cgit v1.2.3-70-g09d2 From 4afa0ace429624fde392b29d05a803672a41192e Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 11 Oct 2012 18:43:52 +0200 Subject: drm/i915/dvo-ch7xxx: fix get_hw_state The boot-up state seems to be all-zeros, so it's safer to check for the bits that need to be set when the dvo encoder is in the dpms on state, than checking the bits we set when it's in the off state. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55047 Tested-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/dvo_ch7xxx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/dvo_ch7xxx.c b/drivers/gpu/drm/i915/dvo_ch7xxx.c index 38f3a6cb8c7..3edd981e077 100644 --- a/drivers/gpu/drm/i915/dvo_ch7xxx.c +++ b/drivers/gpu/drm/i915/dvo_ch7xxx.c @@ -303,10 +303,10 @@ static bool ch7xxx_get_hw_state(struct intel_dvo_device *dvo) ch7xxx_readb(dvo, CH7xxx_PM, &val); - if (val & CH7xxx_PM_FPD) - return false; - else + if (val & (CH7xxx_PM_DVIL | CH7xxx_PM_DVIP)) return true; + else + return false; } static void ch7xxx_dump_regs(struct intel_dvo_device *dvo) -- cgit v1.2.3-70-g09d2 From eda2d7f582d51a4b5e01d48845ea28321357b136 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Wed, 10 Oct 2012 18:35:28 -0300 Subject: drm/i915: HSW CRW stability magic This magic brings stability to HSW CRW machines. Signed-off-by: Rodrigo Vivi Signed-off-by: Ben Widawsky Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 04b0c070cdf..bb941f8cd55 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3961,6 +3961,9 @@ i915_gem_init_hw(struct drm_device *dev) if (!intel_enable_gtt()) return -EIO; + if (IS_HASWELL(dev) && (I915_READ(0x120010) == 1)) + I915_WRITE(0x9008, I915_READ(0x9008) | 0xf0000); + i915_gem_l3_remap(dev); i915_gem_init_swizzling(dev); -- cgit v1.2.3-70-g09d2 From be3cd5e37716bcf1579f63bdd919345a1f9692b9 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Fri, 12 Oct 2012 10:33:05 +0300 Subject: drm/i915: fix non-DP-D eDP backlight cleanup and module reload Backlight is initialized for eDP, but cleaned up only for eDP on DP-D port. This leaves behind a dangling backlight interface on module unload on machines that have eDP connected to something other than DP-D, and breaks the backlight interface for subsequent module reloads. Fix the cleanup, and thus module reload on affected machines. Reported-by: Imre Deak Signed-off-by: Jani Nikula Reviewed-by: Mika Kuoppala Tested-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index c14d407d41e..bd2c34a0aa9 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -2370,8 +2370,9 @@ static void intel_dp_destroy(struct drm_connector *connector) { struct drm_device *dev = connector->dev; + struct intel_dp *intel_dp = intel_attached_dp(connector); - if (intel_dpd_is_edp(dev)) + if (is_edp(intel_dp)) intel_panel_destroy_backlight(dev); drm_sysfs_connector_remove(connector); -- cgit v1.2.3-70-g09d2 From 7d55a5dd61f794df89a733b1b8223cdbffe8897c Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 28 Sep 2012 11:54:48 +0100 Subject: [PARISC] asm: redo generic includes Signed-off-by: James Bottomley --- arch/parisc/include/asm/Kbuild | 7 ++++--- arch/parisc/include/asm/auxvec.h | 4 ---- arch/parisc/include/asm/compat_signal.h | 2 -- arch/parisc/include/asm/cputime.h | 6 ------ arch/parisc/include/asm/device.h | 7 ------- arch/parisc/include/asm/div64.h | 1 - arch/parisc/include/asm/emergency-restart.h | 6 ------ arch/parisc/include/asm/hw_irq.h | 8 -------- arch/parisc/include/asm/irq_regs.h | 1 - arch/parisc/include/asm/kdebug.h | 1 - arch/parisc/include/asm/kvm_para.h | 1 - arch/parisc/include/asm/local.h | 1 - arch/parisc/include/asm/local64.h | 1 - arch/parisc/include/asm/mutex.h | 9 --------- arch/parisc/include/asm/param.h | 1 - arch/parisc/include/asm/percpu.h | 7 ------- arch/parisc/include/asm/poll.h | 1 - arch/parisc/include/asm/real.h | 5 ----- arch/parisc/include/asm/segment.h | 6 ------ arch/parisc/include/asm/topology.h | 6 ------ arch/parisc/include/asm/user.h | 5 ----- arch/parisc/include/asm/vga.h | 6 ------ arch/parisc/include/asm/xor.h | 1 - 23 files changed, 4 insertions(+), 89 deletions(-) delete mode 100644 arch/parisc/include/asm/auxvec.h delete mode 100644 arch/parisc/include/asm/compat_signal.h delete mode 100644 arch/parisc/include/asm/cputime.h delete mode 100644 arch/parisc/include/asm/device.h delete mode 100644 arch/parisc/include/asm/div64.h delete mode 100644 arch/parisc/include/asm/emergency-restart.h delete mode 100644 arch/parisc/include/asm/hw_irq.h delete mode 100644 arch/parisc/include/asm/irq_regs.h delete mode 100644 arch/parisc/include/asm/kdebug.h delete mode 100644 arch/parisc/include/asm/kvm_para.h delete mode 100644 arch/parisc/include/asm/local.h delete mode 100644 arch/parisc/include/asm/local64.h delete mode 100644 arch/parisc/include/asm/mutex.h delete mode 100644 arch/parisc/include/asm/param.h delete mode 100644 arch/parisc/include/asm/percpu.h delete mode 100644 arch/parisc/include/asm/poll.h delete mode 100644 arch/parisc/include/asm/real.h delete mode 100644 arch/parisc/include/asm/segment.h delete mode 100644 arch/parisc/include/asm/topology.h delete mode 100644 arch/parisc/include/asm/user.h delete mode 100644 arch/parisc/include/asm/vga.h delete mode 100644 arch/parisc/include/asm/xor.h diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild index 458371a1565..7728106426a 100644 --- a/arch/parisc/include/asm/Kbuild +++ b/arch/parisc/include/asm/Kbuild @@ -1,6 +1,7 @@ include include/asm-generic/Kbuild.asm header-y += pdc.h -generic-y += clkdev.h -generic-y += word-at-a-time.h -generic-y += exec.h +generic-y += word-at-a-time.h auxvec.h user.h cputime.h emergency-restart.h \ + segment.h topology.h vga.h device.h percpu.h hw_irq.h mutex.h \ + div64.h irq_regs.h kdebug.h kvm_para.h local64.h local.h param.h \ + poll.h xor.h clkdev.h exec.h diff --git a/arch/parisc/include/asm/auxvec.h b/arch/parisc/include/asm/auxvec.h deleted file mode 100644 index 9c3ac4b89dc..00000000000 --- a/arch/parisc/include/asm/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMPARISC_AUXVEC_H -#define __ASMPARISC_AUXVEC_H - -#endif diff --git a/arch/parisc/include/asm/compat_signal.h b/arch/parisc/include/asm/compat_signal.h deleted file mode 100644 index 6ad02c360b2..00000000000 --- a/arch/parisc/include/asm/compat_signal.h +++ /dev/null @@ -1,2 +0,0 @@ -/* Use generic */ -#include diff --git a/arch/parisc/include/asm/cputime.h b/arch/parisc/include/asm/cputime.h deleted file mode 100644 index dcdf2fbd7e7..00000000000 --- a/arch/parisc/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __PARISC_CPUTIME_H -#define __PARISC_CPUTIME_H - -#include - -#endif /* __PARISC_CPUTIME_H */ diff --git a/arch/parisc/include/asm/device.h b/arch/parisc/include/asm/device.h deleted file mode 100644 index d8f9872b0e2..00000000000 --- a/arch/parisc/include/asm/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/arch/parisc/include/asm/div64.h b/arch/parisc/include/asm/div64.h deleted file mode 100644 index 6cd978cefb2..00000000000 --- a/arch/parisc/include/asm/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/emergency-restart.h b/arch/parisc/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c48e42..00000000000 --- a/arch/parisc/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/parisc/include/asm/hw_irq.h b/arch/parisc/include/asm/hw_irq.h deleted file mode 100644 index 6707f7df392..00000000000 --- a/arch/parisc/include/asm/hw_irq.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _ASM_HW_IRQ_H -#define _ASM_HW_IRQ_H - -/* - * linux/include/asm/hw_irq.h - */ - -#endif diff --git a/arch/parisc/include/asm/irq_regs.h b/arch/parisc/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b7027..00000000000 --- a/arch/parisc/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/kdebug.h b/arch/parisc/include/asm/kdebug.h deleted file mode 100644 index 6ece1b03766..00000000000 --- a/arch/parisc/include/asm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/kvm_para.h b/arch/parisc/include/asm/kvm_para.h deleted file mode 100644 index 14fab8f0b95..00000000000 --- a/arch/parisc/include/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/local.h b/arch/parisc/include/asm/local.h deleted file mode 100644 index c11c530f74d..00000000000 --- a/arch/parisc/include/asm/local.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/local64.h b/arch/parisc/include/asm/local64.h deleted file mode 100644 index 36c93b5cc23..00000000000 --- a/arch/parisc/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/mutex.h b/arch/parisc/include/asm/mutex.h deleted file mode 100644 index 458c1f7fbc1..00000000000 --- a/arch/parisc/include/asm/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include diff --git a/arch/parisc/include/asm/param.h b/arch/parisc/include/asm/param.h deleted file mode 100644 index 965d4542797..00000000000 --- a/arch/parisc/include/asm/param.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/percpu.h b/arch/parisc/include/asm/percpu.h deleted file mode 100644 index a0dcd197012..00000000000 --- a/arch/parisc/include/asm/percpu.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _PARISC_PERCPU_H -#define _PARISC_PERCPU_H - -#include - -#endif - diff --git a/arch/parisc/include/asm/poll.h b/arch/parisc/include/asm/poll.h deleted file mode 100644 index c98509d3149..00000000000 --- a/arch/parisc/include/asm/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/parisc/include/asm/real.h b/arch/parisc/include/asm/real.h deleted file mode 100644 index 82acb25db39..00000000000 --- a/arch/parisc/include/asm/real.h +++ /dev/null @@ -1,5 +0,0 @@ -#ifndef _PARISC_REAL_H -#define _PARISC_REAL_H - - -#endif diff --git a/arch/parisc/include/asm/segment.h b/arch/parisc/include/asm/segment.h deleted file mode 100644 index 26794ddb652..00000000000 --- a/arch/parisc/include/asm/segment.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __PARISC_SEGMENT_H -#define __PARISC_SEGMENT_H - -/* Only here because we have some old header files that expect it.. */ - -#endif diff --git a/arch/parisc/include/asm/topology.h b/arch/parisc/include/asm/topology.h deleted file mode 100644 index d8133eb0b1e..00000000000 --- a/arch/parisc/include/asm/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_PARISC_TOPOLOGY_H -#define _ASM_PARISC_TOPOLOGY_H - -#include - -#endif /* _ASM_PARISC_TOPOLOGY_H */ diff --git a/arch/parisc/include/asm/user.h b/arch/parisc/include/asm/user.h deleted file mode 100644 index 80224753e50..00000000000 --- a/arch/parisc/include/asm/user.h +++ /dev/null @@ -1,5 +0,0 @@ -/* This file should not exist, but lots of generic code still includes - it. It's a hangover from old a.out days and the traditional core - dump format. We are ELF-only, and so are our core dumps. If we - need to support HP/UX core format then we'll do it here - eventually. */ diff --git a/arch/parisc/include/asm/vga.h b/arch/parisc/include/asm/vga.h deleted file mode 100644 index 171399a88ca..00000000000 --- a/arch/parisc/include/asm/vga.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_PARISC_VGA_H__ -#define __ASM_PARISC_VGA_H__ - -/* nothing */ - -#endif /* __ASM_PARISC_VGA_H__ */ diff --git a/arch/parisc/include/asm/xor.h b/arch/parisc/include/asm/xor.h deleted file mode 100644 index c82eb12a5b1..00000000000 --- a/arch/parisc/include/asm/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include -- cgit v1.2.3-70-g09d2 From f2bab3eb4198ad49895e4cde0216beb3a1a88e31 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 2 Oct 2012 11:17:06 -0700 Subject: hwmon: (pmbus) remove CONFIG_EXPERIMENTAL This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Guenter Roeck CC: Jean Delvare Signed-off-by: Kees Cook Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 2ca6a5a4f5a..60745a53582 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -4,7 +4,7 @@ menuconfig PMBUS tristate "PMBus support" - depends on I2C && EXPERIMENTAL + depends on I2C default n help Say yes here if you want to enable PMBus support. -- cgit v1.2.3-70-g09d2 From 07d336006346f7f2e93e690de7c53a7e605f87f9 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 2 Oct 2012 11:16:18 -0700 Subject: Documentation/hwmon: remove CONFIG_EXPERIMENTAL This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. CC: Jean Delvare CC: Guenter Roeck CC: Rob Landley Signed-off-by: Kees Cook Signed-off-by: Guenter Roeck --- Documentation/hwmon/submitting-patches | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches index 790f774a303..843751c41fe 100644 --- a/Documentation/hwmon/submitting-patches +++ b/Documentation/hwmon/submitting-patches @@ -60,8 +60,7 @@ increase the chances of your change being accepted. * Add the driver to Kconfig and Makefile in alphabetical order. -* Make sure that all dependencies are listed in Kconfig. For new drivers, it - is most likely prudent to add a dependency on EXPERIMENTAL. +* Make sure that all dependencies are listed in Kconfig. * Avoid forward declarations if you can. Rearrange the code if necessary. -- cgit v1.2.3-70-g09d2 From 1102dcab849313bd5a340b299b5cf61b518fbc0f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 9 Oct 2012 13:23:57 -0700 Subject: hwmon: (coretemp) Add support for Atom CE4110/4150/4170 TjMax for the CE4100 series of Atom CPUs was previously reported to be 110 degrees C. cpuinfo logs on the web show existing CPU types CE4110, CE4150, and CE4170, reported as "model name : Intel(R) Atom(TM) CPU CE41{1|5|7}0 @ 1.{2|6}0GHz" with model 28 (0x1c) and stepping 10 (0x0a). Add the three known variants to the tjmax table. Signed-off-by: Guenter Roeck cc: stable@vger.kernel.org Acked-by: Jean Delvare --- Documentation/hwmon/coretemp | 1 + drivers/hwmon/coretemp.c | 7 +++++-- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp index c86b50c03ea..f17256f069b 100644 --- a/Documentation/hwmon/coretemp +++ b/Documentation/hwmon/coretemp @@ -105,6 +105,7 @@ Process Processor TjMax(C) 330/230 125 E680/660/640/620 90 E680T/660T/640T/620T 110 + CE4170/4150/4110 110 45nm Core2 Processors Solo ULV SU3500/3300 100 diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 984a3f13923..47b8d84b489 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -205,8 +205,11 @@ static const struct tjmax __cpuinitconst tjmax_table[] = { { "CPU N455", 100000 }, { "CPU N470", 100000 }, { "CPU N475", 100000 }, - { "CPU 230", 100000 }, - { "CPU 330", 125000 }, + { "CPU 230", 100000 }, /* Model 0x1c, stepping 2 */ + { "CPU 330", 125000 }, /* Model 0x1c, stepping 2 */ + { "CPU CE4110", 110000 }, /* Model 0x1c, stepping 10 */ + { "CPU CE4150", 110000 }, /* Model 0x1c, stepping 10 */ + { "CPU CE4170", 110000 }, /* Model 0x1c, stepping 10 */ }; static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id, -- cgit v1.2.3-70-g09d2 From 08280e6c4c2e8049ac61d9e8e3536ec1df629c0d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 14 Oct 2012 17:59:40 -0700 Subject: sparc64: Like x86 we should check current->mm during perf backtrace generation. If the MM is not active, only report the top-level PC. Do not try to access the address space. Signed-off-by: David S. Miller --- arch/sparc/kernel/perf_event.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index e48651dace1..9e96f849a74 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -1738,8 +1738,6 @@ static void perf_callchain_user_64(struct perf_callchain_entry *entry, { unsigned long ufp; - perf_callchain_store(entry, regs->tpc); - ufp = regs->u_regs[UREG_I6] + STACK_BIAS; do { struct sparc_stackf *usf, sf; @@ -1760,8 +1758,6 @@ static void perf_callchain_user_32(struct perf_callchain_entry *entry, { unsigned long ufp; - perf_callchain_store(entry, regs->tpc); - ufp = regs->u_regs[UREG_I6] & 0xffffffffUL; do { struct sparc_stackf32 *usf, sf; @@ -1780,6 +1776,11 @@ static void perf_callchain_user_32(struct perf_callchain_entry *entry, void perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) { + perf_callchain_store(entry, regs->tpc); + + if (!current->mm) + return; + flushw_user(); if (test_thread_flag(TIF_32BIT)) perf_callchain_user_32(entry, regs); -- cgit v1.2.3-70-g09d2 From cf7599322a6052dae7353f6d986eae06dc7759f5 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 15 Oct 2012 13:54:29 +0900 Subject: sh: Wire up kcmp syscall. Signed-off-by: Paul Mundt --- arch/sh/include/uapi/asm/unistd_32.h | 3 ++- arch/sh/include/uapi/asm/unistd_64.h | 3 ++- arch/sh/kernel/syscalls_32.S | 1 + arch/sh/kernel/syscalls_64.S | 1 + 4 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/sh/include/uapi/asm/unistd_32.h b/arch/sh/include/uapi/asm/unistd_32.h index 72fd1e06100..9e465f246dc 100644 --- a/arch/sh/include/uapi/asm/unistd_32.h +++ b/arch/sh/include/uapi/asm/unistd_32.h @@ -378,7 +378,8 @@ #define __NR_setns 364 #define __NR_process_vm_readv 365 #define __NR_process_vm_writev 366 +#define __NR_kcmp 367 -#define NR_syscalls 367 +#define NR_syscalls 368 #endif /* __ASM_SH_UNISTD_32_H */ diff --git a/arch/sh/include/uapi/asm/unistd_64.h b/arch/sh/include/uapi/asm/unistd_64.h index a28edc32969..8e3a2edd284 100644 --- a/arch/sh/include/uapi/asm/unistd_64.h +++ b/arch/sh/include/uapi/asm/unistd_64.h @@ -398,7 +398,8 @@ #define __NR_setns 375 #define __NR_process_vm_readv 376 #define __NR_process_vm_writev 377 +#define __NR_kcmp 378 -#define NR_syscalls 378 +#define NR_syscalls 379 #endif /* __ASM_SH_UNISTD_64_H */ diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index 4b68f0f7976..fe97ae5e56f 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -384,3 +384,4 @@ ENTRY(sys_call_table) .long sys_setns .long sys_process_vm_readv /* 365 */ .long sys_process_vm_writev + .long sys_kcmp diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index 0956345b36e..5c7b1c67bdc 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -404,3 +404,4 @@ sys_call_table: .long sys_setns /* 375 */ .long sys_process_vm_readv .long sys_process_vm_writev + .long sys_kcmp -- cgit v1.2.3-70-g09d2 From 0dd4d5cbe4c38165dc9b3ad329ebb23f24d74fdb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 15 Oct 2012 14:08:48 +0900 Subject: sh: Fix up more fallout from pointless ARM __iomem churn. It was already pointed out how to fix these cases before the offending patches were merged, but unsurprisingly, that didn't happen. As this change is entirely superfluous to begin with, simply shut things up by casting everything away. Signed-off-by: Paul Mundt --- drivers/sh/intc/access.c | 45 +++++++++++++++++++++++++++------------------ drivers/sh/intc/chip.c | 4 ++-- drivers/tty/serial/sh-sci.c | 3 ++- 3 files changed, 31 insertions(+), 21 deletions(-) diff --git a/drivers/sh/intc/access.c b/drivers/sh/intc/access.c index f892ae1d212..114390f967d 100644 --- a/drivers/sh/intc/access.c +++ b/drivers/sh/intc/access.c @@ -75,54 +75,61 @@ unsigned long intc_get_field_from_handle(unsigned int value, unsigned int handle static unsigned long test_8(unsigned long addr, unsigned long h, unsigned long ignore) { - return intc_get_field_from_handle(__raw_readb(addr), h); + void __iomem *ptr = (void __iomem *)addr; + return intc_get_field_from_handle(__raw_readb(ptr), h); } static unsigned long test_16(unsigned long addr, unsigned long h, unsigned long ignore) { - return intc_get_field_from_handle(__raw_readw(addr), h); + void __iomem *ptr = (void __iomem *)addr; + return intc_get_field_from_handle(__raw_readw(ptr), h); } static unsigned long test_32(unsigned long addr, unsigned long h, unsigned long ignore) { - return intc_get_field_from_handle(__raw_readl(addr), h); + void __iomem *ptr = (void __iomem *)addr; + return intc_get_field_from_handle(__raw_readl(ptr), h); } static unsigned long write_8(unsigned long addr, unsigned long h, unsigned long data) { - __raw_writeb(intc_set_field_from_handle(0, data, h), addr); - (void)__raw_readb(addr); /* Defeat write posting */ + void __iomem *ptr = (void __iomem *)addr; + __raw_writeb(intc_set_field_from_handle(0, data, h), ptr); + (void)__raw_readb(ptr); /* Defeat write posting */ return 0; } static unsigned long write_16(unsigned long addr, unsigned long h, unsigned long data) { - __raw_writew(intc_set_field_from_handle(0, data, h), addr); - (void)__raw_readw(addr); /* Defeat write posting */ + void __iomem *ptr = (void __iomem *)addr; + __raw_writew(intc_set_field_from_handle(0, data, h), ptr); + (void)__raw_readw(ptr); /* Defeat write posting */ return 0; } static unsigned long write_32(unsigned long addr, unsigned long h, unsigned long data) { - __raw_writel(intc_set_field_from_handle(0, data, h), addr); - (void)__raw_readl(addr); /* Defeat write posting */ + void __iomem *ptr = (void __iomem *)addr; + __raw_writel(intc_set_field_from_handle(0, data, h), ptr); + (void)__raw_readl(ptr); /* Defeat write posting */ return 0; } static unsigned long modify_8(unsigned long addr, unsigned long h, unsigned long data) { + void __iomem *ptr = (void __iomem *)addr; unsigned long flags; unsigned int value; local_irq_save(flags); - value = intc_set_field_from_handle(__raw_readb(addr), data, h); - __raw_writeb(value, addr); - (void)__raw_readb(addr); /* Defeat write posting */ + value = intc_set_field_from_handle(__raw_readb(ptr), data, h); + __raw_writeb(value, ptr); + (void)__raw_readb(ptr); /* Defeat write posting */ local_irq_restore(flags); return 0; } @@ -130,12 +137,13 @@ static unsigned long modify_8(unsigned long addr, unsigned long h, static unsigned long modify_16(unsigned long addr, unsigned long h, unsigned long data) { + void __iomem *ptr = (void __iomem *)addr; unsigned long flags; unsigned int value; local_irq_save(flags); - value = intc_set_field_from_handle(__raw_readw(addr), data, h); - __raw_writew(value, addr); - (void)__raw_readw(addr); /* Defeat write posting */ + value = intc_set_field_from_handle(__raw_readw(ptr), data, h); + __raw_writew(value, ptr); + (void)__raw_readw(ptr); /* Defeat write posting */ local_irq_restore(flags); return 0; } @@ -143,12 +151,13 @@ static unsigned long modify_16(unsigned long addr, unsigned long h, static unsigned long modify_32(unsigned long addr, unsigned long h, unsigned long data) { + void __iomem *ptr = (void __iomem *)addr; unsigned long flags; unsigned int value; local_irq_save(flags); - value = intc_set_field_from_handle(__raw_readl(addr), data, h); - __raw_writel(value, addr); - (void)__raw_readl(addr); /* Defeat write posting */ + value = intc_set_field_from_handle(__raw_readl(ptr), data, h); + __raw_writel(value, ptr); + (void)__raw_readl(ptr); /* Defeat write posting */ local_irq_restore(flags); return 0; } diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c index 012df2676a2..46427b48e2f 100644 --- a/drivers/sh/intc/chip.c +++ b/drivers/sh/intc/chip.c @@ -83,7 +83,7 @@ static void intc_mask_ack(struct irq_data *data) unsigned int irq = data->irq; struct intc_desc_int *d = get_intc_desc(irq); unsigned long handle = intc_get_ack_handle(irq); - unsigned long addr; + void __iomem *addr; intc_disable(data); @@ -91,7 +91,7 @@ static void intc_mask_ack(struct irq_data *data) if (handle) { unsigned int value; - addr = INTC_REG(d, _INTC_ADDR_D(handle), 0); + addr = (void __iomem *)INTC_REG(d, _INTC_ADDR_D(handle), 0); value = intc_set_field_from_handle(0, 1, handle); switch (_INTC_FN(handle)) { diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 9be296cf729..6ee59001d61 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -530,7 +530,8 @@ static inline int sci_rxd_in(struct uart_port *port) if (s->cfg->port_reg <= 0) return 1; - return !!__raw_readb(s->cfg->port_reg); + /* Cast for ARM damage */ + return !!__raw_readb((void __iomem *)s->cfg->port_reg); } /* ********************************************************************** * -- cgit v1.2.3-70-g09d2 From 47dbec59c37ab02946a6db7ac30c3bf6ca02630c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 28 Sep 2012 23:36:16 +0200 Subject: pinctrl: samsung: use __devinit section for init code The samsung pinctrl driver has a probe function that is __devinit and that calls a lot of other functions that are marked __init, which kbuild complains about. Marking everything __devinit means that the code does not discarded when CONFIG_HOTPLUG is set, which is a little more wasteful, but also more consistent Without this patch, building exynos_defconfig results in: WARNING: drivers/pinctrl/built-in.o(.devinit.text+0x124): Section mismatch in reference from the function samsung_pinctrl_probe() to the function .init.text:samsung_gpiolib_register() The function __devinit samsung_pinctrl_probe() references a function __init samsung_gpiolib_register(). If samsung_gpiolib_register is only used by samsung_pinctrl_probe then annotate samsung_gpiolib_register with a matching annotation. Signed-off-by: Arnd Bergmann Cc: Thomas Abraham Cc: Linus Walleij Cc: Stephen Warren Cc: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-samsung.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index dd108a94acf..861cd5f04d5 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -513,7 +513,7 @@ static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset, * Parse the pin names listed in the 'samsung,pins' property and convert it * into a list of gpio numbers are create a pin group from it. */ -static int __init samsung_pinctrl_parse_dt_pins(struct platform_device *pdev, +static int __devinit samsung_pinctrl_parse_dt_pins(struct platform_device *pdev, struct device_node *cfg_np, struct pinctrl_desc *pctl, unsigned int **pin_list, unsigned int *npins) { @@ -560,7 +560,7 @@ static int __init samsung_pinctrl_parse_dt_pins(struct platform_device *pdev, * from device node of the pin-controller. A pin group is formed with all * the pins listed in the "samsung,pins" property. */ -static int __init samsung_pinctrl_parse_dt(struct platform_device *pdev, +static int __devinit samsung_pinctrl_parse_dt(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { struct device *dev = &pdev->dev; @@ -655,7 +655,7 @@ static int __init samsung_pinctrl_parse_dt(struct platform_device *pdev, } /* register the pinctrl interface with the pinctrl subsystem */ -static int __init samsung_pinctrl_register(struct platform_device *pdev, +static int __devinit samsung_pinctrl_register(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { struct pinctrl_desc *ctrldesc = &drvdata->pctl; @@ -729,7 +729,7 @@ static int __init samsung_pinctrl_register(struct platform_device *pdev, } /* register the gpiolib interface with the gpiolib subsystem */ -static int __init samsung_gpiolib_register(struct platform_device *pdev, +static int __devinit samsung_gpiolib_register(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { struct gpio_chip *gc; @@ -762,7 +762,7 @@ static int __init samsung_gpiolib_register(struct platform_device *pdev, } /* unregister the gpiolib interface with the gpiolib subsystem */ -static int __init samsung_gpiolib_unregister(struct platform_device *pdev, +static int __devinit samsung_gpiolib_unregister(struct platform_device *pdev, struct samsung_pinctrl_drv_data *drvdata) { int ret = gpiochip_remove(drvdata->gc); -- cgit v1.2.3-70-g09d2 From 8c6871979d903b8b0e4cd78a59d84afc262611bf Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Mon, 8 Oct 2012 11:40:36 +0200 Subject: pinctrl: bcm2835: Use existing pointer to struct device The pointer to "pdev->dev" is already stored in "dev", so use it in devm_request_and_ioremap(). Signed-off-by: Tobias Klauser Acked-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-bcm2835.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c index a4adee633fa..3e0cc0ddb41 100644 --- a/drivers/pinctrl/pinctrl-bcm2835.c +++ b/drivers/pinctrl/pinctrl-bcm2835.c @@ -960,7 +960,7 @@ static int __devinit bcm2835_pinctrl_probe(struct platform_device *pdev) return err; } - pc->base = devm_request_and_ioremap(&pdev->dev, &iomem); + pc->base = devm_request_and_ioremap(dev, &iomem); if (!pc->base) return -EADDRNOTAVAIL; -- cgit v1.2.3-70-g09d2 From 1cd6dc2e3c2dbececb60a3a5ca52af645d9be205 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 7 Oct 2012 21:28:20 +0800 Subject: pinctrl: remove duplicated include from pinctrl-bcm2835.c Remove duplicated include. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Acked-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-bcm2835.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c index 3e0cc0ddb41..956d585309b 100644 --- a/drivers/pinctrl/pinctrl-bcm2835.c +++ b/drivers/pinctrl/pinctrl-bcm2835.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3-70-g09d2 From 3ee73aa077d1468b293bb208814a8c240eefa9b7 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 7 Oct 2012 22:01:15 +0800 Subject: pinctrl: fix return value in bcm2835_pinctrl_probe() In case of error, the function pinctrl_register() returns NULL not ERR_PTR(). The PTR_ERR() in the return value should be replaced with error no. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Acked-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-bcm2835.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-bcm2835.c b/drivers/pinctrl/pinctrl-bcm2835.c index 956d585309b..7e9be18ec2d 100644 --- a/drivers/pinctrl/pinctrl-bcm2835.c +++ b/drivers/pinctrl/pinctrl-bcm2835.c @@ -1031,7 +1031,7 @@ static int __devinit bcm2835_pinctrl_probe(struct platform_device *pdev) pc->pctl_dev = pinctrl_register(&bcm2835_pinctrl_desc, dev, pc); if (!pc->pctl_dev) { gpiochip_remove(&pc->gpio_chip); - return PTR_ERR(pc->pctl_dev); + return -EINVAL; } pc->gpio_range = bcm2835_pinctrl_gpio_range; -- cgit v1.2.3-70-g09d2 From 7bec207427c2efb79471a2e80906aabd132fd460 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 9 Oct 2012 15:35:56 +0000 Subject: pinctrl: sirf: remove sirfsoc_gpio_set_pull function The prima2 platform advertises needing no mach/gpio.h header file, but its pinctrl driver now has a sirfsoc_gpio_set_pull function that uses constants defined in arch/arm/mach-prima2/include/mach/gpio.h, which fails to build. Fortunately, the sirfsoc_gpio_set_pull is not used anywhere in the kernel, so we can safely remove it. Any out of tree drivers using it will have to be converted to use proper pinctrl functions to do the same. Without this patch, building prima2_defconfig results in: drivers/pinctrl/pinctrl-sirf.c: In function 'sirfsoc_gpio_set_pull': drivers/pinctrl/pinctrl-sirf.c:1331:7: error: 'SIRFSOC_GPIO_PULL_NONE' undeclared (first use in this function) drivers/pinctrl/pinctrl-sirf.c:1331:7: note: each undeclared identifier is reported only once for each function it appears in drivers/pinctrl/pinctrl-sirf.c:1334:7: error: 'SIRFSOC_GPIO_PULL_UP' undeclared (first use in this function) drivers/pinctrl/pinctrl-sirf.c:1338:7: error: 'SIRFSOC_GPIO_PULL_DOWN' undeclared (first use in this function) Signed-off-by: Arnd Bergmann Acked-by: Barry Song Signed-off-by: Linus Walleij --- arch/arm/mach-prima2/include/mach/gpio.h | 13 ------------ drivers/pinctrl/pinctrl-sirf.c | 35 -------------------------------- 2 files changed, 48 deletions(-) delete mode 100644 arch/arm/mach-prima2/include/mach/gpio.h diff --git a/arch/arm/mach-prima2/include/mach/gpio.h b/arch/arm/mach-prima2/include/mach/gpio.h deleted file mode 100644 index 1904bb03876..00000000000 --- a/arch/arm/mach-prima2/include/mach/gpio.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __MACH_GPIO_H -#define __MACH_GPIO_H - -/* Pull up/down values */ -enum sirfsoc_gpio_pull { - SIRFSOC_GPIO_PULL_NONE, - SIRFSOC_GPIO_PULL_UP, - SIRFSOC_GPIO_PULL_DOWN, -}; - -void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode); - -#endif diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c index 675497c1514..9ecacf3d0a7 100644 --- a/drivers/pinctrl/pinctrl-sirf.c +++ b/drivers/pinctrl/pinctrl-sirf.c @@ -1323,41 +1323,6 @@ static inline struct sirfsoc_gpio_bank *sirfsoc_gpio_to_bank(unsigned int gpio) return &sgpio_bank[gpio / SIRFSOC_GPIO_BANK_SIZE]; } -void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode) -{ - struct sirfsoc_gpio_bank *bank = sirfsoc_gpio_to_bank(gpio); - int idx = sirfsoc_gpio_to_offset(gpio); - u32 val, offset; - unsigned long flags; - - offset = SIRFSOC_GPIO_CTRL(bank->id, idx); - - spin_lock_irqsave(&sgpio_lock, flags); - - val = readl(bank->chip.regs + offset); - - switch (mode) { - case SIRFSOC_GPIO_PULL_NONE: - val &= ~SIRFSOC_GPIO_CTL_PULL_MASK; - break; - case SIRFSOC_GPIO_PULL_UP: - val |= SIRFSOC_GPIO_CTL_PULL_MASK; - val |= SIRFSOC_GPIO_CTL_PULL_HIGH; - break; - case SIRFSOC_GPIO_PULL_DOWN: - val |= SIRFSOC_GPIO_CTL_PULL_MASK; - val &= ~SIRFSOC_GPIO_CTL_PULL_HIGH; - break; - default: - break; - } - - writel(val, bank->chip.regs + offset); - - spin_unlock_irqrestore(&sgpio_lock, flags); -} -EXPORT_SYMBOL(sirfsoc_gpio_set_pull); - static inline struct sirfsoc_gpio_bank *sirfsoc_irqchip_to_bank(struct gpio_chip *chip) { return container_of(to_of_mm_gpio_chip(chip), struct sirfsoc_gpio_bank, chip); -- cgit v1.2.3-70-g09d2 From b51b16a36fd8fd27b2e392a86f2637deaaf4267f Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 10 Oct 2012 20:59:32 +0800 Subject: pinctrl: remove duplicated include from pinctrl-xway.c Remove duplicated include. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-xway.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c index f8d917d40c9..b9bcaec6622 100644 --- a/drivers/pinctrl/pinctrl-xway.c +++ b/drivers/pinctrl/pinctrl-xway.c @@ -17,8 +17,6 @@ #include #include #include -#include -#include #include #include "pinctrl-lantiq.h" -- cgit v1.2.3-70-g09d2 From b7213702662e2139be92c4a3efe6682529f7a729 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 11 Oct 2012 14:33:42 +0200 Subject: pinctrl/nomadik: provide stubs for legacy Nomadik The compilation of the pinctrl driver failed on the legacy Nomadik NHK8815 platform because it was not providing the PRCMU interfaces needed to support the extended alternate functions used by the ux500 series. Solve this by providing some stubs for the legacy platform, to avoid too much #ifdefs in the code per se. Theoretically this actually allows the Nomadik and Ux500 to have a single kernel image with support for the PRCM registers on the Ux500 (though they have incompatible archs, but the spirit is there). Reported-by: Arnd Bergmann Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-nomadik.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index fec9c30133d..f640f13f73c 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -30,7 +30,20 @@ #include /* Since we request GPIOs from ourself */ #include +/* + * For the U8500 archs, use the PRCMU register interface, for the older + * Nomadik, provide some stubs. The functions using these will only be + * called on the U8500 series. + */ +#ifdef CONFIG_ARCH_U8500 #include +#else +static inline u32 prcmu_read(unsigned int reg) { + return 0; +} +static inline void prcmu_write(unsigned int reg, u32 value) {} +static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {} +#endif #include -- cgit v1.2.3-70-g09d2 From 51f58c68a364363b29c07668c90af19c9b8a8c85 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 11 Oct 2012 16:33:44 +0200 Subject: pinctrl/nomadik: always use the simple irqdomain Since the simple irqdomain will fall back to a linear domain if the first_irq provided is <= 0, just use this, just make sure the first_irq is negative in the device tree case. Cc: Rob Herring Acked-by: Lee Jones Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-nomadik.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index f640f13f73c..01aea1c3b5f 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -1281,6 +1281,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) struct clk *clk; int secondary_irq; void __iomem *base; + int irq_start = -1; int irq; int ret; @@ -1384,19 +1385,11 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) platform_set_drvdata(dev, nmk_chip); - if (np) { - /* The DT case will just grab a set of IRQ numbers */ - nmk_chip->domain = irq_domain_add_linear(np, NMK_GPIO_PER_CHIP, - &nmk_gpio_irq_simple_ops, nmk_chip); - } else { - /* Non-DT legacy mode, use hardwired IRQ numbers */ - int irq_start; - + if (!np) irq_start = NOMADIK_GPIO_TO_IRQ(pdata->first_gpio); - nmk_chip->domain = irq_domain_add_simple(NULL, + nmk_chip->domain = irq_domain_add_simple(NULL, NMK_GPIO_PER_CHIP, irq_start, &nmk_gpio_irq_simple_ops, nmk_chip); - } if (!nmk_chip->domain) { dev_err(&dev->dev, "failed to create irqdomain\n"); ret = -ENOSYS; -- cgit v1.2.3-70-g09d2 From 733a48e5ae5bf28b046fad984d458c747cbb8c21 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 11 Oct 2012 16:43:40 +0200 Subject: ALSA: ac97 - Fix missing NULL check in snd_ac97_cvol_new() Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44721 Signed-off-by: Takashi Iwai --- sound/pci/ac97/ac97_codec.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index 9473fca9681..8b0f9968830 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -1271,6 +1271,8 @@ static int snd_ac97_cvol_new(struct snd_card *card, char *name, int reg, unsigne tmp.index = ac97->num; kctl = snd_ctl_new1(&tmp, ac97); } + if (!kctl) + return -ENOMEM; if (reg >= AC97_PHONE && reg <= AC97_PCM) set_tlv_db_scale(kctl, db_scale_5bit_12db_max); else -- cgit v1.2.3-70-g09d2 From e73fa21b4e6ce10934cc8016a9a512d7152a860b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 11 Oct 2012 16:51:52 +0200 Subject: ALSA: hda - Clean up superfluous position_fix list entries The white-list entries of position_fix for ASUS laptops have been added just as a workaround for broken COMBO mode. Now the combo mode itself is disabled, we can safely remove these entries. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 6833835a218..69810b21f7f 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2813,8 +2813,6 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = { SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB), - SND_PCI_QUIRK(0x1043, 0x1ac3, "ASUS X53S", POS_FIX_POSBUF), - SND_PCI_QUIRK(0x1043, 0x1b43, "ASUS K53E", POS_FIX_POSBUF), SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB), SND_PCI_QUIRK(0x10de, 0xcb89, "Macbook Pro 7,1", POS_FIX_LPIB), SND_PCI_QUIRK(0x1297, 0x3166, "Shuttle", POS_FIX_LPIB), -- cgit v1.2.3-70-g09d2 From 128960a9ad67e2d119738f5211956e0304517551 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 12 Oct 2012 17:28:18 +0200 Subject: ALSA: hda - Fix registration race of VGA switcheroo Delay the registration of VGA switcheroo client to the end of the probing. Otherwise a too quick switching may result in Oops during probing. Also add the check of the return value from snd_hda_lock_devices(). Reported-and-tested-by: Daniel J Blueman Cc: [v3.5+] Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 69810b21f7f..ecf277506ad 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -501,6 +501,7 @@ struct azx { /* VGA-switcheroo setup */ unsigned int use_vga_switcheroo:1; + unsigned int vga_switcheroo_registered:1; unsigned int init_failed:1; /* delayed init failed */ unsigned int disabled:1; /* disabled by VGA-switcher */ @@ -2640,7 +2641,9 @@ static void azx_vs_set_state(struct pci_dev *pci, if (disabled) { azx_suspend(&pci->dev); chip->disabled = true; - snd_hda_lock_devices(chip->bus); + if (snd_hda_lock_devices(chip->bus)) + snd_printk(KERN_WARNING SFX + "Cannot lock devices!\n"); } else { snd_hda_unlock_devices(chip->bus); chip->disabled = false; @@ -2683,14 +2686,20 @@ static const struct vga_switcheroo_client_ops azx_vs_ops = { static int __devinit register_vga_switcheroo(struct azx *chip) { + int err; + if (!chip->use_vga_switcheroo) return 0; /* FIXME: currently only handling DIS controller * is there any machine with two switchable HDMI audio controllers? */ - return vga_switcheroo_register_audio_client(chip->pci, &azx_vs_ops, + err = vga_switcheroo_register_audio_client(chip->pci, &azx_vs_ops, VGA_SWITCHEROO_DIS, chip->bus != NULL); + if (err < 0) + return err; + chip->vga_switcheroo_registered = 1; + return 0; } #else #define init_vga_switcheroo(chip) /* NOP */ @@ -2712,7 +2721,8 @@ static int azx_free(struct azx *chip) if (use_vga_switcheroo(chip)) { if (chip->disabled && chip->bus) snd_hda_unlock_devices(chip->bus); - vga_switcheroo_unregister_client(chip->pci); + if (chip->vga_switcheroo_registered) + vga_switcheroo_unregister_client(chip->pci); } if (chip->initialized) { @@ -3060,14 +3070,6 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, } ok: - err = register_vga_switcheroo(chip); - if (err < 0) { - snd_printk(KERN_ERR SFX - "Error registering VGA-switcheroo client\n"); - azx_free(chip); - return err; - } - err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); if (err < 0) { snd_printk(KERN_ERR SFX "Error creating device [card]!\n"); @@ -3338,6 +3340,13 @@ static int __devinit azx_probe(struct pci_dev *pci, if (pci_dev_run_wake(pci)) pm_runtime_put_noidle(&pci->dev); + err = register_vga_switcheroo(chip); + if (err < 0) { + snd_printk(KERN_ERR SFX + "Error registering VGA-switcheroo client\n"); + goto out_free; + } + dev++; return 0; -- cgit v1.2.3-70-g09d2 From 041d81f493d90c940ec41f0ec98bc7c4f2fba431 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 4 Oct 2012 11:58:00 +0300 Subject: usb: dwc3: gadget: fix 'endpoint always busy' bug If a USB transfer has already been started, meaning we have already issued StartTransfer command to that particular endpoint, DWC3_EP_BUSY flag has also already been set. When we try to cancel this transfer which is already in controller's cache, we will not receive XferComplete event and we must clear DWC3_EP_BUSY in order to allow subsequent requests to be properly started. The best place to clear that flag is right after issuing DWC3_DEPCMD_ENDTRANSFER. Cc: stable@vger.kernel.org # v3.4 v3.5 v3.6 Reported-by: Moiz Sonasath Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index c9e729a4bf6..7b7deddf6a5 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1904,7 +1904,7 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); WARN_ON_ONCE(ret); dep->resource_index = 0; - + dep->flags &= ~DWC3_EP_BUSY; udelay(100); } -- cgit v1.2.3-70-g09d2 From 6ff1f3d3bd7c69c62ca5773b1b684bce42eff06a Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Mon, 15 Oct 2012 11:20:22 +0200 Subject: usb: musb: am35xx: drop spurious unplugging a device On AM3517, tx and rx interrupt are detected together with the disconnect event. This generates a kernel panic in musb_interrupt, because rx / tx are handled after disconnect. This issue was seen on a Technexion's TAM3517 SOM. Unplugging a device, tx / rx interrupts together with disconnect are detected. This brings to kernel panic like this: [ 68.526153] Unable to handle kernel NULL pointer dereference at virtual address 00000011 [ 68.534698] pgd = c0004000 [ 68.537536] [00000011] *pgd=00000000 [ 68.541351] Internal error: Oops: 17 [#1] ARM [ 68.545928] Modules linked in: [ 68.549163] CPU: 0 Not tainted (3.6.0-rc5-00020-g9e05905 #178) [ 68.555694] PC is at rxstate+0x8/0xdc [ 68.559539] LR is at musb_interrupt+0x98/0x858 [ 68.564239] pc : [] lr : [] psr: 40000193 [ 68.564239] sp : ce83fb40 ip : d0906410 fp : 00000000 [ 68.576293] r10: 00000000 r9 : cf3b0e40 r8 : 00000002 [ 68.581817] r7 : 00000019 r6 : 00000001 r5 : 00000001 r4 : 000000d4 [ 68.588684] r3 : 00000000 r2 : 00000000 r1 : ffffffcc r0 : cf23c108 [ 68.595550] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment ke Note: this behavior is not seen with a USB hub, while it is easy to reproduce connecting a USB-pen directly to the USB-A of the board. Drop tx / rx interrupts if disconnect is detected. Signed-off-by: Stefano Babic CC: Felipe Balbi Cc: stable@vger.kernel.org # 3.5 3.6 Tested-by: Dmitry Lifshitz Tested-by: Igor Grinberg Signed-off-by: Felipe Balbi --- drivers/usb/musb/am35x.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c index 457f25e62c5..c964d6af178 100644 --- a/drivers/usb/musb/am35x.c +++ b/drivers/usb/musb/am35x.c @@ -305,6 +305,12 @@ static irqreturn_t am35x_musb_interrupt(int irq, void *hci) ret = IRQ_HANDLED; } + /* Drop spurious RX and TX if device is disconnected */ + if (musb->int_usb & MUSB_INTR_DISCONNECT) { + musb->int_tx = 0; + musb->int_rx = 0; + } + if (musb->int_tx || musb->int_rx || musb->int_usb) ret |= musb_interrupt(musb); -- cgit v1.2.3-70-g09d2 From 01b8daf71b2fd2f6ece5f063a089abf4b13f1d6e Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Sat, 13 Oct 2012 19:20:18 +0530 Subject: usb: dwc3: shutdown usb_phy when removing the device We call usb_phy_init() from dwc3_core_init() during probe, so adding usb_phy_shutdown() to dwc3_core_exit() while removing the device so we don't keep PHYs turned on, consuming power, unnecessarily. Signed-off-by: Vivek Gautam Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index b415c0c859d..c14ebc975ba 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -409,6 +409,10 @@ static void dwc3_core_exit(struct dwc3 *dwc) { dwc3_event_buffers_cleanup(dwc); dwc3_free_event_buffers(dwc); + + usb_phy_shutdown(dwc->usb2_phy); + usb_phy_shutdown(dwc->usb3_phy); + } #define DWC3_ALIGN_MASK (16 - 1) -- cgit v1.2.3-70-g09d2 From 68687c842caefd5386d47a571fb4725df3556891 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 15 Oct 2012 00:16:49 +0100 Subject: ARM: fix oops on initial entry to userspace with Thumb2 kernels Daniel Mack reports an oops at boot with the latest kernels: Internal error: Oops - undefined instruction: 0 [#1] SMP THUMB2 Modules linked in: CPU: 0 Not tainted (3.6.0-11057-g584df1d #145) PC is at cpsw_probe+0x45a/0x9ac LR is at trace_hardirqs_on_caller+0x8f/0xfc pc : [] lr : [] psr: 60000113 sp : cf055fb0 ip : 00000000 fp : 00000000 r10: 00000000 r9 : 00000000 r8 : 00000000 r7 : 00000000 r6 : 00000000 r5 : c0344555 r4 : 00000000 r3 : cf057a40 r2 : 00000000 r1 : 00000001 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 50c5387d Table: 8f3f4019 DAC: 00000015 Process init (pid: 1, stack limit = 0xcf054240) Stack: (0xcf055fb0 to 0xcf056000) 5fa0: 00000001 00000000 00000000 00000000 5fc0: cf055fb0 c000d1a8 00000000 00000000 00000000 00000000 00000000 00000000 5fe0: 00000000 be9b3f10 00000000 b6f6add0 00000010 00000000 aaaabfaf a8babbaa The analysis of this is as follows. In init/main.c, we issue: kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND); This creates a new thread, which falls through to the ret_from_fork assembly, with r4 set NULL and r5 set to kernel_init. You can see this in your oops dump register set - r5 is 0xc0344555, which is the address of kernel_init plus 1 which marks the function as Thumb code. Now, let's look at this code a little closer - this is what the disassembly looks like: c000d180 : c000d180: f03a fe08 bl c0047d94 c000d184: 2d00 cmp r5, #0 c000d186: bf1e ittt ne c000d188: 4620 movne r0, r4 c000d18a: 46fe movne lr, pc <-- XXXXXXX c000d18c: 46af movne pc, r5 c000d18e: 46e9 mov r9, sp c000d190: ea4f 3959 mov.w r9, r9, lsr #13 c000d194: ea4f 3949 mov.w r9, r9, lsl #13 c000d198: e7c8 b.n c000d12c c000d19a: bf00 nop c000d19c: f3af 8000 nop.w This code was introduced in 9fff2fa0db911 (arm: switch to saner kernel_execve() semantics). I have marked one instruction, and it's the significant one - I'll come back to that later. Eventually, having had a successful call to kernel_execve(), kernel_init() returns zero. In returning, it uses the value in 'lr' which was set by the instruction I marked above. Unfortunately, this causes lr to contain 0xc000d18e - an even address. This switches the ISA to ARM on return but with a non word aligned PC value. So, what do we end up executing? Well, not the instructions above - yes the opcodes, but they don't mean the same thing in ARM mode. In ARM mode, it looks like this instead: c000d18c: 46e946af strbtmi r4, [r9], pc, lsr #13 c000d190: 3959ea4f ldmdbcc r9, {r0, r1, r2, r3, r6, r9, fp, sp, lr, pc}^ c000d194: 3949ea4f stmdbcc r9, {r0, r1, r2, r3, r6, r9, fp, sp, lr, pc}^ c000d198: bf00e7c8 svclt 0x0000e7c8 c000d19c: 8000f3af andhi pc, r0, pc, lsr #7 c000d1a0: e88db092 stm sp, {r1, r4, r7, ip, sp, pc} c000d1a4: 46e81fff ; instruction: 0x46e81fff c000d1a8: 8a00f3ef bhi 0xc004a16c c000d1ac: 0a0cf08a beq 0xc03493dc I have included more above, because it's relevant. The PSR flags which we can see in the oops dump are nZCv, so Z and C are set. All the above ARM instructions are not executed, except for two. c000d1a0, which has no writeback, and writes below the current stack pointer (and that data is lost when we take the next exception.) The other instruction which is executed is c000d1ac, which takes us to... 0xc03493dc. However, remember that bit 1 of the PC got set. So that makes the PC value 0xc03493de. And that value is the value we find in the oops dump for PC. What is the instruction here when interpreted in ARM mode? 0: f71e150c ; instruction: 0xf71e150c and there we have our undefined instruction (remember that the 'never' condition code, 0xf, has been deprecated and is now always executed as it is now being used for additional instructions.) This path also nicely explains the state of the stack we see in the oops dump too. The above is a consistent and sane story for how we got to the oops dump, which all stems from the instruction at 0xc000d18a being wrong. Reported-by: Daniel Mack Tested-by: Daniel Mack Signed-off-by: Russell King Signed-off-by: Linus Torvalds --- arch/arm/kernel/entry-common.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 417bac1846b..34711757ba5 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -88,9 +88,9 @@ ENTRY(ret_from_fork) bl schedule_tail cmp r5, #0 movne r0, r4 - movne lr, pc + adrne lr, BSYM(1f) movne pc, r5 - get_thread_info tsk +1: get_thread_info tsk b ret_slow_syscall ENDPROC(ret_from_fork) -- cgit v1.2.3-70-g09d2 From 325adeb55e32c50055c654e5b06a49f0bd88420b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 15 Oct 2012 13:44:56 +0200 Subject: mm: huge_memory: Fix build error. Certain configurations won't implicitly pull in resulting in the following build error: mm/huge_memory.c: In function 'release_pte_page': mm/huge_memory.c:1697:2: error: implicit declaration of function 'unlock_page' [-Werror=implicit-function-declaration] mm/huge_memory.c: In function '__collapse_huge_page_isolate': mm/huge_memory.c:1757:3: error: implicit declaration of function 'trylock_page' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Reported-by: David Daney Signed-off-by: Ralf Baechle Signed-off-by: Linus Torvalds --- mm/huge_memory.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index a863af26c79..40f17c34b41 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include "internal.h" -- cgit v1.2.3-70-g09d2 From 29bb4cc5e0547a7589556f8629e39016c5d203c0 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 14 Oct 2012 18:50:05 -0700 Subject: docbook: networking: fix file paths for uapi headers Update file paths in Documentation/DocBook/networking.tmpl for uapi headers. Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- Documentation/DocBook/networking.tmpl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/networking.tmpl b/Documentation/DocBook/networking.tmpl index 59ad69a9d77..29df25016c7 100644 --- a/Documentation/DocBook/networking.tmpl +++ b/Documentation/DocBook/networking.tmpl @@ -56,7 +56,7 @@ !Enet/core/filter.c Generic Network Statistics -!Iinclude/linux/gen_stats.h +!Iinclude/uapi/linux/gen_stats.h !Enet/core/gen_stats.c !Enet/core/gen_estimator.c @@ -80,7 +80,7 @@ !Enet/wimax/op-rfkill.c !Enet/wimax/stack.c !Iinclude/net/wimax.h -!Iinclude/linux/wimax.h +!Iinclude/uapi/linux/wimax.h -- cgit v1.2.3-70-g09d2 From 0b2ffb78c0ef83bb03f594fec2adc13ac6ac427b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 4 Oct 2012 02:32:41 +0200 Subject: usb: gadget: Make webcam gadget select USB_LIBCOMPOSITE Composite gadget support is now available as a library instead of being built with each gadget. Composite drivers need to select USB_LIBCOMPOSITE. Signed-off-by: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index dfb51a45496..e0ff51b8952 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -952,6 +952,7 @@ endif config USB_G_WEBCAM tristate "USB Webcam Gadget" depends on VIDEO_DEV + select USB_LIBCOMPOSITE help The Webcam Gadget acts as a composite USB Audio and Video Class device. It provides a userspace API to process UVC control requests -- cgit v1.2.3-70-g09d2 From 8282da478966975a5efff3eeb650a49fe67fa14e Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 4 Oct 2012 02:32:42 +0200 Subject: MAINTAINERS: Add maintainer entry for the USB webcam gadget Signed-off-by: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index e73060fe078..bfac52f4fc7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7731,6 +7731,13 @@ W: http://www.ideasonboard.org/uvc/ S: Maintained F: drivers/media/usb/uvc/ +USB WEBCAM GADGET +M: Laurent Pinchart +L: linux-usb@vger.kernel.org +S: Maintained +F: drivers/usb/gadget/*uvc*.c +F: drivers/usb/gadget/webcam.c + USB WIRELESS RNDIS DRIVER (rndis_wlan) M: Jussi Kivilinna L: linux-wireless@vger.kernel.org -- cgit v1.2.3-70-g09d2 From a1871936c0f4f10850a5671c5deb1a92fcca1155 Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Wed, 3 Oct 2012 15:00:19 +0200 Subject: drm/radeon: use %zu for formatting size_t Fixes compiler warnings on 32bit. Signed-off-by: Luca Tettamanti Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_acpi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_acpi.c b/drivers/gpu/drm/radeon/radeon_acpi.c index b0a5688c67f..ecb7e3374a5 100644 --- a/drivers/gpu/drm/radeon/radeon_acpi.c +++ b/drivers/gpu/drm/radeon/radeon_acpi.c @@ -201,7 +201,7 @@ static int radeon_atif_verify_interface(acpi_handle handle, size = *(u16 *) info->buffer.pointer; if (size < 12) { - DRM_INFO("ATIF buffer is too small: %lu\n", size); + DRM_INFO("ATIF buffer is too small: %zu\n", size); err = -EINVAL; goto out; } @@ -485,7 +485,7 @@ static int radeon_atcs_verify_interface(acpi_handle handle, size = *(u16 *) info->buffer.pointer; if (size < 8) { - DRM_INFO("ATCS buffer is too small: %lu\n", size); + DRM_INFO("ATCS buffer is too small: %zu\n", size); err = -EINVAL; goto out; } -- cgit v1.2.3-70-g09d2 From cd23492af3d4401c02c48a4bebe5995c9498eac5 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 4 Oct 2012 09:10:10 -0400 Subject: drm/radeon: fix compilation with backlight disabled Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_acpi.c | 2 ++ drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 42 ++++++++++++------------- 2 files changed, 23 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_acpi.c b/drivers/gpu/drm/radeon/radeon_acpi.c index ecb7e3374a5..196d28d9957 100644 --- a/drivers/gpu/drm/radeon/radeon_acpi.c +++ b/drivers/gpu/drm/radeon/radeon_acpi.c @@ -370,6 +370,7 @@ int radeon_atif_handler(struct radeon_device *rdev, radeon_set_backlight_level(rdev, enc, req.backlight_level); +#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) if (rdev->is_atom_bios) { struct radeon_encoder_atom_dig *dig = enc->enc_priv; backlight_force_update(dig->bl_dev, @@ -379,6 +380,7 @@ int radeon_atif_handler(struct radeon_device *rdev, backlight_force_update(dig->bl_dev, BACKLIGHT_UPDATE_HOTKEY); } +#endif } } /* TODO: check other events */ diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 92487e61477..fb15b62ff98 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -269,27 +269,6 @@ static const struct drm_encoder_helper_funcs radeon_legacy_lvds_helper_funcs = { .disable = radeon_legacy_encoder_disable, }; -#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) - -static uint8_t radeon_legacy_lvds_level(struct backlight_device *bd) -{ - struct radeon_backlight_privdata *pdata = bl_get_data(bd); - uint8_t level; - - /* Convert brightness to hardware level */ - if (bd->props.brightness < 0) - level = 0; - else if (bd->props.brightness > RADEON_MAX_BL_LEVEL) - level = RADEON_MAX_BL_LEVEL; - else - level = bd->props.brightness; - - if (pdata->negative) - level = RADEON_MAX_BL_LEVEL - level; - - return level; -} - u8 radeon_legacy_get_backlight_level(struct radeon_encoder *radeon_encoder) { @@ -331,6 +310,27 @@ radeon_legacy_set_backlight_level(struct radeon_encoder *radeon_encoder, u8 leve radeon_legacy_lvds_update(&radeon_encoder->base, dpms_mode); } +#if defined(CONFIG_BACKLIGHT_CLASS_DEVICE) || defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE) + +static uint8_t radeon_legacy_lvds_level(struct backlight_device *bd) +{ + struct radeon_backlight_privdata *pdata = bl_get_data(bd); + uint8_t level; + + /* Convert brightness to hardware level */ + if (bd->props.brightness < 0) + level = 0; + else if (bd->props.brightness > RADEON_MAX_BL_LEVEL) + level = RADEON_MAX_BL_LEVEL; + else + level = bd->props.brightness; + + if (pdata->negative) + level = RADEON_MAX_BL_LEVEL - level; + + return level; +} + static int radeon_legacy_backlight_update_status(struct backlight_device *bd) { struct radeon_backlight_privdata *pdata = bl_get_data(bd); -- cgit v1.2.3-70-g09d2 From 29dbe3bcd2e28e71823febdca989d63d5c27d152 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 5 Oct 2012 10:22:02 -0400 Subject: drm/radeon: allocate PPLLs from low to high The order shouldn't matter, but there have been problems reported on certain older asics. This behaves more like the original code before the PPLL allocation rework. Signed-off-by: Alex Deucher Cc: Markus Trippelsdorf --- drivers/gpu/drm/radeon/atombios_crtc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 96184d02c8d..2e566e123e9 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1690,10 +1690,10 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) } /* all other cases */ pll_in_use = radeon_get_pll_use_mask(crtc); - if (!(pll_in_use & (1 << ATOM_PPLL2))) - return ATOM_PPLL2; if (!(pll_in_use & (1 << ATOM_PPLL1))) return ATOM_PPLL1; + if (!(pll_in_use & (1 << ATOM_PPLL2))) + return ATOM_PPLL2; DRM_ERROR("unable to allocate a PPLL\n"); return ATOM_PPLL_INVALID; } else { @@ -1715,10 +1715,10 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) } /* all other cases */ pll_in_use = radeon_get_pll_use_mask(crtc); - if (!(pll_in_use & (1 << ATOM_PPLL2))) - return ATOM_PPLL2; if (!(pll_in_use & (1 << ATOM_PPLL1))) return ATOM_PPLL1; + if (!(pll_in_use & (1 << ATOM_PPLL2))) + return ATOM_PPLL2; DRM_ERROR("unable to allocate a PPLL\n"); return ATOM_PPLL_INVALID; } else { -- cgit v1.2.3-70-g09d2 From 23d4f1f246a98dde1dc485e0be9a647126630347 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 8 Oct 2012 09:45:46 -0400 Subject: drm/radeon: update comments to clarify VM setup (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The actual set up and assignment of VM page tables is done on the fly in radeon_gart.c. v2: update vm size comments Signed-off-by: Alex Deucher Reviewed-by: Christian König --- drivers/gpu/drm/radeon/ni.c | 4 ++++ drivers/gpu/drm/radeon/radeon_device.c | 4 ++++ drivers/gpu/drm/radeon/si.c | 7 ++++--- 3 files changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 8bcb554ea0c..83dc0852d5c 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -770,6 +770,10 @@ static int cayman_pcie_gart_enable(struct radeon_device *rdev) WREG32(0x15DC, 0); /* empty context1-7 */ + /* Assign the pt base to something valid for now; the pts used for + * the VMs are determined by the application and setup and assigned + * on the fly in the vm part of radeon_gart.c + */ for (i = 1; i < 8; i++) { WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR + (i << 2), 0); WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR + (i << 2), 0); diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 64a42647f08..bd13ca09eb6 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -1018,6 +1018,10 @@ int radeon_device_init(struct radeon_device *rdev, return r; /* initialize vm here */ mutex_init(&rdev->vm_manager.lock); + /* Adjust VM size here. + * Currently set to 4GB ((1 << 20) 4k pages). + * Max GPUVM size for cayman and SI is 40 bits. + */ rdev->vm_manager.max_pfn = 1 << 20; INIT_LIST_HEAD(&rdev->vm_manager.lru_vm); diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index f79633a036c..df8dd770164 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2407,12 +2407,13 @@ static int si_pcie_gart_enable(struct radeon_device *rdev) WREG32(0x15DC, 0); /* empty context1-15 */ - /* FIXME start with 4G, once using 2 level pt switch to full - * vm size space - */ /* set vm size, must be a multiple of 4 */ WREG32(VM_CONTEXT1_PAGE_TABLE_START_ADDR, 0); WREG32(VM_CONTEXT1_PAGE_TABLE_END_ADDR, rdev->vm_manager.max_pfn); + /* Assign the pt base to something valid for now; the pts used for + * the VMs are determined by the application and setup and assigned + * on the fly in the vm part of radeon_gart.c + */ for (i = 1; i < 16; i++) { if (i < 8) WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2), -- cgit v1.2.3-70-g09d2 From 90a51a329258e3c868f6f4c1fb264ca01c590c57 Mon Sep 17 00:00:00 2001 From: Christian König Date: Tue, 9 Oct 2012 13:31:17 +0200 Subject: drm/radeon: allocate page tables on demand v4 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Based on Dmitries work, but splitting the code into page directory and page table handling makes it far more readable and (hopefully) more reliable. Allocations of page tables are made from the SA on demand, that should still work fine since all page tables are of the same size. Also using the fact that allocations from the SA are mostly continuously (except for end of buffer wraps and under very high memory pressure) to group updates send to the chipset specific code into larger chunks. v3: mostly a rewrite of Dmitries previous patch. v4: fix some typos and coding style Signed-off-by: Dmitry Cherkasov Signed-off-by: Christian König Tested-by: Michel Dänzer Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/ni.c | 2 +- drivers/gpu/drm/radeon/radeon.h | 11 +- drivers/gpu/drm/radeon/radeon_gart.c | 322 +++++++++++++++++++++++++++-------- 3 files changed, 262 insertions(+), 73 deletions(-) diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 83dc0852d5c..ab8d1f5fe68 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1580,7 +1580,7 @@ void cayman_vm_flush(struct radeon_device *rdev, int ridx, struct radeon_vm *vm) radeon_ring_write(ring, 0); radeon_ring_write(ring, PACKET0(VM_CONTEXT0_PAGE_TABLE_END_ADDR + (vm->id << 2), 0)); - radeon_ring_write(ring, vm->last_pfn); + radeon_ring_write(ring, rdev->vm_manager.max_pfn); radeon_ring_write(ring, PACKET0(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (vm->id << 2), 0)); radeon_ring_write(ring, vm->pd_gpu_addr >> 12); diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index b04c06444d8..bc6b56bf274 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -663,9 +663,14 @@ struct radeon_vm { struct list_head list; struct list_head va; unsigned id; - unsigned last_pfn; - u64 pd_gpu_addr; - struct radeon_sa_bo *sa_bo; + + /* contains the page directory */ + struct radeon_sa_bo *page_directory; + uint64_t pd_gpu_addr; + + /* array of page tables, one for each page directory entry */ + struct radeon_sa_bo **page_tables; + struct mutex mutex; /* last fence for cs using this vm */ struct radeon_fence *fence; diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index f0c06d196b7..98b170a0df9 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -422,6 +422,18 @@ void radeon_gart_fini(struct radeon_device *rdev) * TODO bind a default page at vm initialization for default address */ +/** + * radeon_vm_num_pde - return the number of page directory entries + * + * @rdev: radeon_device pointer + * + * Calculate the number of page directory entries (cayman+). + */ +static unsigned radeon_vm_num_pdes(struct radeon_device *rdev) +{ + return rdev->vm_manager.max_pfn >> RADEON_VM_BLOCK_SIZE; +} + /** * radeon_vm_directory_size - returns the size of the page directory in bytes * @@ -431,7 +443,7 @@ void radeon_gart_fini(struct radeon_device *rdev) */ static unsigned radeon_vm_directory_size(struct radeon_device *rdev) { - return (rdev->vm_manager.max_pfn >> RADEON_VM_BLOCK_SIZE) * 8; + return RADEON_GPU_PAGE_ALIGN(radeon_vm_num_pdes(rdev) * 8); } /** @@ -451,11 +463,11 @@ int radeon_vm_manager_init(struct radeon_device *rdev) if (!rdev->vm_manager.enabled) { /* allocate enough for 2 full VM pts */ - size = RADEON_GPU_PAGE_ALIGN(radeon_vm_directory_size(rdev)); - size += RADEON_GPU_PAGE_ALIGN(rdev->vm_manager.max_pfn * 8); + size = radeon_vm_directory_size(rdev); + size += rdev->vm_manager.max_pfn * 8; size *= 2; r = radeon_sa_bo_manager_init(rdev, &rdev->vm_manager.sa_manager, - size, + RADEON_GPU_PAGE_ALIGN(size), RADEON_GEM_DOMAIN_VRAM); if (r) { dev_err(rdev->dev, "failed to allocate vm bo (%dKB)\n", @@ -476,7 +488,7 @@ int radeon_vm_manager_init(struct radeon_device *rdev) /* restore page table */ list_for_each_entry(vm, &rdev->vm_manager.lru_vm, list) { - if (vm->sa_bo == NULL) + if (vm->page_directory == NULL) continue; list_for_each_entry(bo_va, &vm->va, vm_list) { @@ -500,16 +512,25 @@ static void radeon_vm_free_pt(struct radeon_device *rdev, struct radeon_vm *vm) { struct radeon_bo_va *bo_va; + int i; - if (!vm->sa_bo) + if (!vm->page_directory) return; list_del_init(&vm->list); - radeon_sa_bo_free(rdev, &vm->sa_bo, vm->fence); + radeon_sa_bo_free(rdev, &vm->page_directory, vm->fence); list_for_each_entry(bo_va, &vm->va, vm_list) { bo_va->valid = false; } + + if (vm->page_tables == NULL) + return; + + for (i = 0; i < radeon_vm_num_pdes(rdev); i++) + radeon_sa_bo_free(rdev, &vm->page_tables[i], vm->fence); + + kfree(vm->page_tables); } /** @@ -545,6 +566,35 @@ void radeon_vm_manager_fini(struct radeon_device *rdev) rdev->vm_manager.enabled = false; } +/** + * radeon_vm_evict - evict page table to make room for new one + * + * @rdev: radeon_device pointer + * @vm: VM we want to allocate something for + * + * Evict a VM from the lru, making sure that it isn't @vm. (cayman+). + * Returns 0 for success, -ENOMEM for failure. + * + * Global and local mutex must be locked! + */ +int radeon_vm_evict(struct radeon_device *rdev, struct radeon_vm *vm) +{ + struct radeon_vm *vm_evict; + + if (list_empty(&rdev->vm_manager.lru_vm)) + return -ENOMEM; + + vm_evict = list_first_entry(&rdev->vm_manager.lru_vm, + struct radeon_vm, list); + if (vm_evict == vm) + return -ENOMEM; + + mutex_lock(&vm_evict->mutex); + radeon_vm_free_pt(rdev, vm_evict); + mutex_unlock(&vm_evict->mutex); + return 0; +} + /** * radeon_vm_alloc_pt - allocates a page table for a VM * @@ -559,20 +609,15 @@ void radeon_vm_manager_fini(struct radeon_device *rdev) */ int radeon_vm_alloc_pt(struct radeon_device *rdev, struct radeon_vm *vm) { - struct radeon_vm *vm_evict; - int r; + unsigned pd_size, pts_size; u64 *pd_addr; - int tables_size; + int r; if (vm == NULL) { return -EINVAL; } - /* allocate enough to cover the current VM size */ - tables_size = RADEON_GPU_PAGE_ALIGN(radeon_vm_directory_size(rdev)); - tables_size += RADEON_GPU_PAGE_ALIGN(vm->last_pfn * 8); - - if (vm->sa_bo != NULL) { + if (vm->page_directory != NULL) { /* update lru */ list_del_init(&vm->list); list_add_tail(&vm->list, &rdev->vm_manager.lru_vm); @@ -580,25 +625,34 @@ int radeon_vm_alloc_pt(struct radeon_device *rdev, struct radeon_vm *vm) } retry: - r = radeon_sa_bo_new(rdev, &rdev->vm_manager.sa_manager, &vm->sa_bo, - tables_size, RADEON_GPU_PAGE_SIZE, false); + pd_size = RADEON_GPU_PAGE_ALIGN(radeon_vm_directory_size(rdev)); + r = radeon_sa_bo_new(rdev, &rdev->vm_manager.sa_manager, + &vm->page_directory, pd_size, + RADEON_GPU_PAGE_SIZE, false); if (r == -ENOMEM) { - if (list_empty(&rdev->vm_manager.lru_vm)) { + r = radeon_vm_evict(rdev, vm); + if (r) return r; - } - vm_evict = list_first_entry(&rdev->vm_manager.lru_vm, struct radeon_vm, list); - mutex_lock(&vm_evict->mutex); - radeon_vm_free_pt(rdev, vm_evict); - mutex_unlock(&vm_evict->mutex); goto retry; } else if (r) { return r; } - pd_addr = radeon_sa_bo_cpu_addr(vm->sa_bo); - vm->pd_gpu_addr = radeon_sa_bo_gpu_addr(vm->sa_bo); - memset(pd_addr, 0, tables_size); + vm->pd_gpu_addr = radeon_sa_bo_gpu_addr(vm->page_directory); + + /* Initially clear the page directory */ + pd_addr = radeon_sa_bo_cpu_addr(vm->page_directory); + memset(pd_addr, 0, pd_size); + + pts_size = radeon_vm_num_pdes(rdev) * sizeof(struct radeon_sa_bo *); + vm->page_tables = kzalloc(pts_size, GFP_KERNEL); + + if (vm->page_tables == NULL) { + DRM_ERROR("Cannot allocate memory for page table array\n"); + radeon_sa_bo_free(rdev, &vm->page_directory, vm->fence); + return -ENOMEM; + } list_add_tail(&vm->list, &rdev->vm_manager.lru_vm); return radeon_vm_bo_update_pte(rdev, vm, rdev->ring_tmp_bo.bo, @@ -793,20 +847,6 @@ int radeon_vm_bo_set_addr(struct radeon_device *rdev, } mutex_lock(&vm->mutex); - if (last_pfn > vm->last_pfn) { - /* release mutex and lock in right order */ - mutex_unlock(&vm->mutex); - mutex_lock(&rdev->vm_manager.lock); - mutex_lock(&vm->mutex); - /* and check again */ - if (last_pfn > vm->last_pfn) { - /* grow va space 32M by 32M */ - unsigned align = ((32 << 20) >> 12) - 1; - radeon_vm_free_pt(rdev, vm); - vm->last_pfn = (last_pfn + align) & ~align; - } - mutex_unlock(&rdev->vm_manager.lock); - } head = &vm->va; last_offset = 0; list_for_each_entry(tmp, &vm->va, vm_list) { @@ -864,6 +904,155 @@ uint64_t radeon_vm_map_gart(struct radeon_device *rdev, uint64_t addr) return result; } +/** + * radeon_vm_update_pdes - make sure that page directory is valid + * + * @rdev: radeon_device pointer + * @vm: requested vm + * @start: start of GPU address range + * @end: end of GPU address range + * + * Allocates new page tables if necessary + * and updates the page directory (cayman+). + * Returns 0 for success, error for failure. + * + * Global and local mutex must be locked! + */ +static int radeon_vm_update_pdes(struct radeon_device *rdev, + struct radeon_vm *vm, + uint64_t start, uint64_t end) +{ + static const uint32_t incr = RADEON_VM_PTE_COUNT * 8; + + uint64_t last_pde = ~0, last_pt = ~0; + unsigned count = 0; + uint64_t pt_idx; + int r; + + start = (start / RADEON_GPU_PAGE_SIZE) >> RADEON_VM_BLOCK_SIZE; + end = (end / RADEON_GPU_PAGE_SIZE) >> RADEON_VM_BLOCK_SIZE; + + /* walk over the address space and update the page directory */ + for (pt_idx = start; pt_idx <= end; ++pt_idx) { + uint64_t pde, pt; + + if (vm->page_tables[pt_idx]) + continue; + +retry: + r = radeon_sa_bo_new(rdev, &rdev->vm_manager.sa_manager, + &vm->page_tables[pt_idx], + RADEON_VM_PTE_COUNT * 8, + RADEON_GPU_PAGE_SIZE, false); + + if (r == -ENOMEM) { + r = radeon_vm_evict(rdev, vm); + if (r) + return r; + goto retry; + } else if (r) { + return r; + } + + pde = vm->pd_gpu_addr + pt_idx * 8; + + pt = radeon_sa_bo_gpu_addr(vm->page_tables[pt_idx]); + + if (((last_pde + 8 * count) != pde) || + ((last_pt + incr * count) != pt)) { + + if (count) { + radeon_asic_vm_set_page(rdev, last_pde, + last_pt, count, incr, + RADEON_VM_PAGE_VALID); + } + + count = 1; + last_pde = pde; + last_pt = pt; + } else { + ++count; + } + } + + if (count) { + radeon_asic_vm_set_page(rdev, last_pde, last_pt, count, + incr, RADEON_VM_PAGE_VALID); + + } + + return 0; +} + +/** + * radeon_vm_update_ptes - make sure that page tables are valid + * + * @rdev: radeon_device pointer + * @vm: requested vm + * @start: start of GPU address range + * @end: end of GPU address range + * @dst: destination address to map to + * @flags: mapping flags + * + * Update the page tables in the range @start - @end (cayman+). + * + * Global and local mutex must be locked! + */ +static void radeon_vm_update_ptes(struct radeon_device *rdev, + struct radeon_vm *vm, + uint64_t start, uint64_t end, + uint64_t dst, uint32_t flags) +{ + static const uint64_t mask = RADEON_VM_PTE_COUNT - 1; + + uint64_t last_pte = ~0, last_dst = ~0; + unsigned count = 0; + uint64_t addr; + + start = start / RADEON_GPU_PAGE_SIZE; + end = end / RADEON_GPU_PAGE_SIZE; + + /* walk over the address space and update the page tables */ + for (addr = start; addr < end; ) { + uint64_t pt_idx = addr >> RADEON_VM_BLOCK_SIZE; + unsigned nptes; + uint64_t pte; + + if ((addr & ~mask) == (end & ~mask)) + nptes = end - addr; + else + nptes = RADEON_VM_PTE_COUNT - (addr & mask); + + pte = radeon_sa_bo_gpu_addr(vm->page_tables[pt_idx]); + pte += (addr & mask) * 8; + + if (((last_pte + 8 * count) != pte) || + ((count + nptes) > 1 << 11)) { + + if (count) { + radeon_asic_vm_set_page(rdev, last_pte, + last_dst, count, + RADEON_GPU_PAGE_SIZE, + flags); + } + + count = nptes; + last_pte = pte; + last_dst = dst; + } else { + count += nptes; + } + + addr += nptes; + dst += nptes * RADEON_GPU_PAGE_SIZE; + } + + if (count) { + radeon_asic_vm_set_page(rdev, last_pte, last_dst, count, + RADEON_GPU_PAGE_SIZE, flags); + } +} + /** * radeon_vm_bo_update_pte - map a bo into the vm page table * @@ -887,12 +1076,11 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev, struct radeon_semaphore *sem = NULL; struct radeon_bo_va *bo_va; unsigned nptes, npdes, ndw; - uint64_t pe, addr; - uint64_t pfn; + uint64_t addr; int r; /* nothing to do if vm isn't bound */ - if (vm->sa_bo == NULL) + if (vm->page_directory == NULL) return 0; bo_va = radeon_vm_bo_find(vm, bo); @@ -939,25 +1127,29 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev, } } - /* estimate number of dw needed */ - /* reserve space for 32-bit padding */ - ndw = 32; - nptes = radeon_bo_ngpu_pages(bo); - pfn = (bo_va->soffset / RADEON_GPU_PAGE_SIZE); + /* assume two extra pdes in case the mapping overlaps the borders */ + npdes = (nptes >> RADEON_VM_BLOCK_SIZE) + 2; + + /* estimate number of dw needed */ + /* semaphore, fence and padding */ + ndw = 32; - /* handle cases where a bo spans several pdes */ - npdes = (ALIGN(pfn + nptes, RADEON_VM_PTE_COUNT) - - (pfn & ~(RADEON_VM_PTE_COUNT - 1))) >> RADEON_VM_BLOCK_SIZE; + if (RADEON_VM_BLOCK_SIZE > 11) + /* reserve space for one header for every 2k dwords */ + ndw += (nptes >> 11) * 3; + else + /* reserve space for one header for + every (1 << BLOCK_SIZE) entries */ + ndw += (nptes >> RADEON_VM_BLOCK_SIZE) * 3; - /* reserve space for one header for every 2k dwords */ - ndw += (nptes >> 11) * 3; /* reserve space for pte addresses */ ndw += nptes * 2; /* reserve space for one header for every 2k dwords */ ndw += (npdes >> 11) * 3; + /* reserve space for pde addresses */ ndw += npdes * 2; @@ -971,22 +1163,14 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev, radeon_fence_note_sync(vm->fence, ridx); } - /* update page table entries */ - pe = vm->pd_gpu_addr; - pe += radeon_vm_directory_size(rdev); - pe += (bo_va->soffset / RADEON_GPU_PAGE_SIZE) * 8; - - radeon_asic_vm_set_page(rdev, pe, addr, nptes, - RADEON_GPU_PAGE_SIZE, bo_va->flags); - - /* update page directory entries */ - addr = pe; - - pe = vm->pd_gpu_addr; - pe += ((bo_va->soffset / RADEON_GPU_PAGE_SIZE) >> RADEON_VM_BLOCK_SIZE) * 8; + r = radeon_vm_update_pdes(rdev, vm, bo_va->soffset, bo_va->eoffset); + if (r) { + radeon_ring_unlock_undo(rdev, ring); + return r; + } - radeon_asic_vm_set_page(rdev, pe, addr, npdes, - RADEON_VM_PTE_COUNT * 8, RADEON_VM_PAGE_VALID); + radeon_vm_update_ptes(rdev, vm, bo_va->soffset, bo_va->eoffset, + addr, bo_va->flags); radeon_fence_unref(&vm->fence); r = radeon_fence_emit(rdev, &vm->fence, ridx); @@ -997,6 +1181,7 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev, radeon_ring_unlock_commit(rdev, ring); radeon_semaphore_free(rdev, &sem, vm->fence); radeon_fence_unref(&vm->last_flush); + return 0; } @@ -1068,7 +1253,6 @@ int radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm) vm->id = 0; vm->fence = NULL; - vm->last_pfn = 0; mutex_init(&vm->mutex); INIT_LIST_HEAD(&vm->list); INIT_LIST_HEAD(&vm->va); -- cgit v1.2.3-70-g09d2 From d72d43cfc5847c176edabc72e6431ba691322c98 Mon Sep 17 00:00:00 2001 From: Christian König Date: Tue, 9 Oct 2012 13:31:18 +0200 Subject: drm/radeon: don't add the IB pool to all VMs v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We want to use VMs without the IB pool in the future. v2: also remove it from radeon_vm_finish. Signed-off-by: Christian König Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon.h | 2 +- drivers/gpu/drm/radeon/radeon_gart.c | 34 +++------------------------------- drivers/gpu/drm/radeon/radeon_kms.c | 22 +++++++++++++++++++++- 3 files changed, 25 insertions(+), 33 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index bc6b56bf274..54cf9b594ca 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1848,7 +1848,7 @@ extern void radeon_ttm_set_active_vram_size(struct radeon_device *rdev, u64 size */ int radeon_vm_manager_init(struct radeon_device *rdev); void radeon_vm_manager_fini(struct radeon_device *rdev); -int radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm); +void radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm); void radeon_vm_fini(struct radeon_device *rdev, struct radeon_vm *vm); int radeon_vm_alloc_pt(struct radeon_device *rdev, struct radeon_vm *vm); struct radeon_fence *radeon_vm_grab_id(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 98b170a0df9..7e21ea32242 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -602,7 +602,6 @@ int radeon_vm_evict(struct radeon_device *rdev, struct radeon_vm *vm) * @vm: vm to bind * * Allocate a page table for the requested vm (cayman+). - * Also starts to populate the page table. * Returns 0 for success, error for failure. * * Global and local mutex must be locked! @@ -655,8 +654,7 @@ retry: } list_add_tail(&vm->list, &rdev->vm_manager.lru_vm); - return radeon_vm_bo_update_pte(rdev, vm, rdev->ring_tmp_bo.bo, - &rdev->ring_tmp_bo.bo->tbo.mem); + return 0; } /** @@ -1241,30 +1239,15 @@ void radeon_vm_bo_invalidate(struct radeon_device *rdev, * @rdev: radeon_device pointer * @vm: requested vm * - * Init @vm (cayman+). - * Map the IB pool and any other shared objects into the VM - * by default as it's used by all VMs. - * Returns 0 for success, error for failure. + * Init @vm fields (cayman+). */ -int radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm) +void radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm) { - struct radeon_bo_va *bo_va; - int r; - vm->id = 0; vm->fence = NULL; mutex_init(&vm->mutex); INIT_LIST_HEAD(&vm->list); INIT_LIST_HEAD(&vm->va); - - /* map the ib pool buffer at 0 in virtual address space, set - * read only - */ - bo_va = radeon_vm_bo_add(rdev, vm, rdev->ring_tmp_bo.bo); - r = radeon_vm_bo_set_addr(rdev, bo_va, RADEON_VA_IB_OFFSET, - RADEON_VM_PAGE_READABLE | - RADEON_VM_PAGE_SNOOPED); - return r; } /** @@ -1286,17 +1269,6 @@ void radeon_vm_fini(struct radeon_device *rdev, struct radeon_vm *vm) radeon_vm_free_pt(rdev, vm); mutex_unlock(&rdev->vm_manager.lock); - /* remove all bo at this point non are busy any more because unbind - * waited for the last vm fence to signal - */ - r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false); - if (!r) { - bo_va = radeon_vm_bo_find(vm, rdev->ring_tmp_bo.bo); - list_del_init(&bo_va->bo_list); - list_del_init(&bo_va->vm_list); - radeon_bo_unreserve(rdev->ring_tmp_bo.bo); - kfree(bo_va); - } if (!list_empty(&vm->va)) { dev_err(rdev->dev, "still active bo inside vm\n"); } diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index 83b8d8aa71c..dc781c49b96 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -419,6 +419,7 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv) /* new gpu have virtual address space support */ if (rdev->family >= CHIP_CAYMAN) { struct radeon_fpriv *fpriv; + struct radeon_bo_va *bo_va; int r; fpriv = kzalloc(sizeof(*fpriv), GFP_KERNEL); @@ -426,7 +427,15 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv) return -ENOMEM; } - r = radeon_vm_init(rdev, &fpriv->vm); + radeon_vm_init(rdev, &fpriv->vm); + + /* map the ib pool buffer read only into + * virtual address space */ + bo_va = radeon_vm_bo_add(rdev, &fpriv->vm, + rdev->ring_tmp_bo.bo); + r = radeon_vm_bo_set_addr(rdev, bo_va, RADEON_VA_IB_OFFSET, + RADEON_VM_PAGE_READABLE | + RADEON_VM_PAGE_SNOOPED); if (r) { radeon_vm_fini(rdev, &fpriv->vm); kfree(fpriv); @@ -454,6 +463,17 @@ void radeon_driver_postclose_kms(struct drm_device *dev, /* new gpu have virtual address space support */ if (rdev->family >= CHIP_CAYMAN && file_priv->driver_priv) { struct radeon_fpriv *fpriv = file_priv->driver_priv; + struct radeon_bo_va *bo_va; + int r; + + r = radeon_bo_reserve(rdev->ring_tmp_bo.bo, false); + if (!r) { + bo_va = radeon_vm_bo_find(&fpriv->vm, + rdev->ring_tmp_bo.bo); + if (bo_va) + radeon_vm_bo_rmv(rdev, bo_va); + radeon_bo_unreserve(rdev->ring_tmp_bo.bo); + } radeon_vm_fini(rdev, &fpriv->vm); kfree(fpriv); -- cgit v1.2.3-70-g09d2 From 13e55c38f8ba4bb15ff9b51e2c5e7801c0f29526 Mon Sep 17 00:00:00 2001 From: Christian König Date: Tue, 9 Oct 2012 13:31:19 +0200 Subject: drm/radeon: separate pt alloc from lru add MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make it possible to allocate a persistent page table. Signed-off-by: Christian König Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_cs.c | 1 + drivers/gpu/drm/radeon/radeon_gart.c | 20 ++++++++++++++++---- 3 files changed, 18 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 54cf9b594ca..8c42d54c2e2 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -1851,6 +1851,7 @@ void radeon_vm_manager_fini(struct radeon_device *rdev); void radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm); void radeon_vm_fini(struct radeon_device *rdev, struct radeon_vm *vm); int radeon_vm_alloc_pt(struct radeon_device *rdev, struct radeon_vm *vm); +void radeon_vm_add_to_lru(struct radeon_device *rdev, struct radeon_vm *vm); struct radeon_fence *radeon_vm_grab_id(struct radeon_device *rdev, struct radeon_vm *vm, int ring); void radeon_vm_fence(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index cb7b7c062fe..41672cc563f 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -478,6 +478,7 @@ static int radeon_cs_ib_vm_chunk(struct radeon_device *rdev, } out: + radeon_vm_add_to_lru(rdev, vm); mutex_unlock(&vm->mutex); mutex_unlock(&rdev->vm_manager.lock); return r; diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index 7e21ea32242..a7677dd1ce9 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -617,9 +617,6 @@ int radeon_vm_alloc_pt(struct radeon_device *rdev, struct radeon_vm *vm) } if (vm->page_directory != NULL) { - /* update lru */ - list_del_init(&vm->list); - list_add_tail(&vm->list, &rdev->vm_manager.lru_vm); return 0; } @@ -653,10 +650,25 @@ retry: return -ENOMEM; } - list_add_tail(&vm->list, &rdev->vm_manager.lru_vm); return 0; } +/** + * radeon_vm_add_to_lru - add VMs page table to LRU list + * + * @rdev: radeon_device pointer + * @vm: vm to add to LRU + * + * Add the allocated page table to the LRU list (cayman+). + * + * Global mutex must be locked! + */ +void radeon_vm_add_to_lru(struct radeon_device *rdev, struct radeon_vm *vm) +{ + list_del_init(&vm->list); + list_add_tail(&vm->list, &rdev->vm_manager.lru_vm); +} + /** * radeon_vm_grab_id - allocate the next free VMID * -- cgit v1.2.3-70-g09d2 From c1a7ca0de38c23a15f652b1693afd56c9f07b16c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 8 Oct 2012 12:15:13 -0400 Subject: drm/radeon/cayman: set VM max pfn at MC init MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit No need to emit them at VM flush as we no longer use variable sized page tables now that we support 2 level page tables. This matches the behavior of SI (which does not support variable sized page tables). Signed-off-by: Alex Deucher Reviewed-by: Christian König --- drivers/gpu/drm/radeon/ni.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index ab8d1f5fe68..8c74c729586 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -776,7 +776,7 @@ static int cayman_pcie_gart_enable(struct radeon_device *rdev) */ for (i = 1; i < 8; i++) { WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR + (i << 2), 0); - WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR + (i << 2), 0); + WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR + (i << 2), rdev->vm_manager.max_pfn); WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (i << 2), rdev->gart.table_addr >> 12); } @@ -1576,12 +1576,6 @@ void cayman_vm_flush(struct radeon_device *rdev, int ridx, struct radeon_vm *vm) if (vm == NULL) return; - radeon_ring_write(ring, PACKET0(VM_CONTEXT0_PAGE_TABLE_START_ADDR + (vm->id << 2), 0)); - radeon_ring_write(ring, 0); - - radeon_ring_write(ring, PACKET0(VM_CONTEXT0_PAGE_TABLE_END_ADDR + (vm->id << 2), 0)); - radeon_ring_write(ring, rdev->vm_manager.max_pfn); - radeon_ring_write(ring, PACKET0(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR + (vm->id << 2), 0)); radeon_ring_write(ring, vm->pd_gpu_addr >> 12); -- cgit v1.2.3-70-g09d2 From 3691feea9826771d853d28d37b6b6e34758fa66d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 8 Oct 2012 17:46:27 -0400 Subject: drm/radeon: check if pcie gen 2 is already enabled (v2) If so, skip enabling it to save time. v2: coding style fixes Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/evergreen.c | 7 ++++++- drivers/gpu/drm/radeon/r600.c | 6 ++++++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index a1f49c5fd74..14313ad43b7 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3431,9 +3431,14 @@ void evergreen_pcie_gen2_enable(struct radeon_device *rdev) if (!(mask & DRM_PCIE_SPEED_50)) return; + speed_cntl = RREG32_PCIE_P(PCIE_LC_SPEED_CNTL); + if (speed_cntl & LC_CURRENT_DATA_RATE) { + DRM_INFO("PCIE gen 2 link speeds already enabled\n"); + return; + } + DRM_INFO("enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0\n"); - speed_cntl = RREG32_PCIE_P(PCIE_LC_SPEED_CNTL); if ((speed_cntl & LC_OTHER_SIDE_EVER_SENT_GEN2) || (speed_cntl & LC_OTHER_SIDE_SUPPORTS_GEN2)) { diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 70c800ff619..cda280d157d 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -3703,6 +3703,12 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev) if (!(mask & DRM_PCIE_SPEED_50)) return; + speed_cntl = RREG32_PCIE_P(PCIE_LC_SPEED_CNTL); + if (speed_cntl & LC_CURRENT_DATA_RATE) { + DRM_INFO("PCIE gen 2 link speeds already enabled\n"); + return; + } + DRM_INFO("enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0\n"); /* 55 nm r6xx asics */ -- cgit v1.2.3-70-g09d2 From 082918471139b07964967cfe5f70230909c82ae1 Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Mon, 15 Oct 2012 08:21:39 +0200 Subject: drm/radeon: Don't destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy(). radeon_i2c_fini() walks thru the list of I2C bus recs rdev->i2c_bus[] to destroy each of them. radeon_ext_tmds_enc_destroy() however also has code to destroy it's associated I2C bus rec which has been obtained by radeon_i2c_lookup() and is therefore also in the i2c_bus[] list. This causes a double free resulting in a kernel panic when unloading the radeon driver. Removing destroy code from radeon_ext_tmds_enc_destroy() fixes this problem. agd5f: fix compiler warning Signed-off-by: Egbert Eich Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index fb15b62ff98..a13ad9d707c 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -991,11 +991,7 @@ static void radeon_legacy_tmds_ext_mode_set(struct drm_encoder *encoder, static void radeon_ext_tmds_enc_destroy(struct drm_encoder *encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct radeon_encoder_ext_tmds *tmds = radeon_encoder->enc_priv; - if (tmds) { - if (tmds->i2c_bus) - radeon_i2c_destroy(tmds->i2c_bus); - } + /* don't destroy the i2c bus record here, this will be done in radeon_i2c_fini */ kfree(radeon_encoder->enc_priv); drm_encoder_cleanup(encoder); kfree(radeon_encoder); -- cgit v1.2.3-70-g09d2 From 8ad33cdf97639e2a1601b6dd8629d351c1c50198 Mon Sep 17 00:00:00 2001 From: Thomas Friebel Date: Mon, 15 Oct 2012 13:16:22 -0400 Subject: drm/radeon: fix spelling typos in debugging output Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c index bba66902c83..47634f27f2e 100644 --- a/drivers/gpu/drm/radeon/radeon_ring.c +++ b/drivers/gpu/drm/radeon/radeon_ring.c @@ -305,7 +305,7 @@ void radeon_ring_write(struct radeon_ring *ring, uint32_t v) { #if DRM_DEBUG_CODE if (ring->count_dw <= 0) { - DRM_ERROR("radeon: writting more dword to ring than expected !\n"); + DRM_ERROR("radeon: writing more dwords to the ring than expected!\n"); } #endif ring->ring[ring->wptr++] = v; -- cgit v1.2.3-70-g09d2 From 3ce9e53e788881da0d5f3912f80e0dd6b501f304 Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Mon, 15 Oct 2012 21:16:56 +0200 Subject: kbuild: Fix accidental revert in commit fe04ddf Commit fe04ddf7c291 ("kbuild: Do not package /boot and /lib in make tar-pkg") accidentally reverted two previous kbuild commits. I don't know what I was thinking. This brings back changes made by commits 24cc7fb69a5b ("x86/kbuild: archscripts depends on scripts_basic") and c1c1a59e37da ("firmware: fix directory creation rule matching with make 3.80") Reported-by: Jan Beulich Cc: Signed-off-by: Michal Marek Signed-off-by: Linus Torvalds --- arch/x86/Makefile | 2 +- scripts/Makefile.fwinst | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 58790bd85c1..05afcca66de 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -142,7 +142,7 @@ KBUILD_CFLAGS += $(call cc-option,-mno-avx,) KBUILD_CFLAGS += $(mflags-y) KBUILD_AFLAGS += $(mflags-y) -archscripts: +archscripts: scripts_basic $(Q)$(MAKE) $(build)=arch/x86/tools relocs ### diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst index c3f69ae275d..4d908d16c03 100644 --- a/scripts/Makefile.fwinst +++ b/scripts/Makefile.fwinst @@ -27,7 +27,7 @@ endif installed-mod-fw := $(addprefix $(INSTALL_FW_PATH)/,$(mod-fw)) installed-fw := $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-all)) -installed-fw-dirs := $(sort $(dir $(installed-fw))) $(INSTALL_FW_PATH)/. +installed-fw-dirs := $(sort $(dir $(installed-fw))) $(INSTALL_FW_PATH)/./ # Workaround for make < 3.81, where .SECONDEXPANSION doesn't work. PHONY += $(INSTALL_FW_PATH)/$$(%) install-all-dirs @@ -42,7 +42,7 @@ quiet_cmd_install = INSTALL $(subst $(srctree)/,,$@) $(installed-fw-dirs): $(call cmd,mkdir) -$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $$(dir $(INSTALL_FW_PATH)/%) +$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $(INSTALL_FW_PATH)/$$(dir %) $(call cmd,install) PHONY += __fw_install __fw_modinst FORCE -- cgit v1.2.3-70-g09d2 From 3e5bde8ef4cc9e719b492726dd82a43d29468cd0 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 15 Oct 2012 22:13:12 +0200 Subject: serial/8250_hp300: Missing 8250 register interface conversion bits MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 2655a2c76f80d91da34faa8f4e114d1793435ed3 ("8250: use the 8250 register interface not the legacy one") forgot to fully switch one instance of struct uart_port to struct uart_8250_port, causing the following compile failure: drivers/tty/serial/8250/8250_hp300.c: In function ‘hpdca_init_one’: drivers/tty/serial/8250/8250_hp300.c:174: error: ‘uart’ undeclared (first use in this function) drivers/tty/serial/8250/8250_hp300.c:174: error: (Each undeclared identifier is reported only once drivers/tty/serial/8250/8250_hp300.c:174: error: for each function it appears in.) This went unnoticed in -next, as CONFIG_HPDCA is not set to y by allmodconfig. Reported-by: Fengguang Wu Cc: Alan Cox Cc: Philip Blundell Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_hp300.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c index 8f1dd2cc00a..f3d0edf4664 100644 --- a/drivers/tty/serial/8250/8250_hp300.c +++ b/drivers/tty/serial/8250/8250_hp300.c @@ -162,7 +162,7 @@ int __init hp300_setup_serial_console(void) static int __devinit hpdca_init_one(struct dio_dev *d, const struct dio_device_id *ent) { - struct uart_port port; + struct uart_8250_port uart; int line; #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -174,19 +174,19 @@ static int __devinit hpdca_init_one(struct dio_dev *d, memset(&uart, 0, sizeof(uart)); /* Memory mapped I/O */ - port.iotype = UPIO_MEM; - port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; - port.irq = d->ipl; - port.uartclk = HPDCA_BAUD_BASE * 16; - port.mapbase = (d->resource.start + UART_OFFSET); - port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); - port.regshift = 1; - port.dev = &d->dev; + uart.port.iotype = UPIO_MEM; + uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + uart.port.irq = d->ipl; + uart.port.uartclk = HPDCA_BAUD_BASE * 16; + uart.port.mapbase = (d->resource.start + UART_OFFSET); + uart.port.membase = (char *)(uart.port.mapbase + DIO_VIRADDRBASE); + uart.port.regshift = 1; + uart.port.dev = &d->dev; line = serial8250_register_8250_port(&uart); if (line < 0) { printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d" - " irq %d failed\n", d->scode, port.irq); + " irq %d failed\n", d->scode, uart.port.irq); return -ENOMEM; } -- cgit v1.2.3-70-g09d2 From dd8e8c4a2c902d8350b702e7bc7c2799e5e7e331 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Mon, 15 Oct 2012 13:40:15 -0700 Subject: thermal, cpufreq: Fix build when CPU_FREQ_TABLE isn't configured Commit 023614183768 ("thermal: add generic cpufreq cooling implementation") requires cpufreq_frequency_get_table(), but that function is only defined for CONFIG_CPU_FREQ_TABLE resulting in the following build error: drivers/built-in.o: In function `cpufreq_get_max_state': drivers/thermal/cpu_cooling.c:259: undefined reference to `cpufreq_frequency_get_table' drivers/built-in.o: In function `get_cpu_frequency': drivers/thermal/cpu_cooling.c:129: undefined reference to `cpufreq_frequency_get_table' Fix it by selecting CONFIG_CPU_FREQ_TABLE for such a configuration. It turns out CONFIG_EXYNOS_THERMAL also needs CONFIG_CPU_FREQ_TABLE, so select it there as well. Signed-off-by: David Rientjes Signed-off-by: Linus Torvalds --- drivers/thermal/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index edfd67d2501..e1cb6bd75f6 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -22,6 +22,7 @@ config THERMAL_HWMON config CPU_THERMAL bool "generic cpu cooling support" depends on THERMAL && CPU_FREQ + select CPU_FREQ_TABLE help This implements the generic cpu cooling mechanism through frequency reduction, cpu hotplug and any other ways of reducing temperature. An @@ -50,6 +51,7 @@ config RCAR_THERMAL config EXYNOS_THERMAL tristate "Temperature sensor on Samsung EXYNOS" depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && THERMAL + select CPU_FREQ_TABLE help If you say yes here you get support for TMU (Thermal Managment Unit) on SAMSUNG EXYNOS series of SoC. -- cgit v1.2.3-70-g09d2 From bd6126bd0766cb0e03a4d832cc3611dff5ea8e50 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 16 Oct 2012 10:15:45 +1000 Subject: drm: radeon: fix printk format warning drivers/gpu/drm/radeon/radeon_atpx_handler.c:151:3: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'size_t' [airlied: Alex had others fixed already, except for atpx one] Signed-off-by: Randy Dunlap Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atpx_handler.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 582e99449c1..1aa3f910b99 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -148,7 +148,7 @@ static int radeon_atpx_verify_interface(struct radeon_atpx *atpx) size = *(u16 *) info->buffer.pointer; if (size < 8) { - printk("ATPX buffer is too small: %lu\n", size); + printk("ATPX buffer is too small: %zu\n", size); err = -EINVAL; goto out; } -- cgit v1.2.3-70-g09d2 From 7b8505300525d7e802ecf52ae160bc63f4ba28d7 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 16 Oct 2012 10:28:21 +1000 Subject: drm: fix warning on 32-bit. This cast was causing a warning on 32-bit builds. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_info.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_info.c b/drivers/gpu/drm/drm_info.c index cdf8b1e7602..441ebc1bdbe 100644 --- a/drivers/gpu/drm/drm_info.c +++ b/drivers/gpu/drm/drm_info.c @@ -239,7 +239,7 @@ int drm_vma_info(struct seq_file *m, void *data) mutex_lock(&dev->struct_mutex); seq_printf(m, "vma use count: %d, high_memory = %pK, 0x%pK\n", atomic_read(&dev->vma_count), - high_memory, (void *)virt_to_phys(high_memory)); + high_memory, (void *)(unsigned long)virt_to_phys(high_memory)); list_for_each_entry(pt, &dev->vmalist, head) { vma = pt->vma; -- cgit v1.2.3-70-g09d2 From 50c08f8e9f44bc7b20e06c06d1180f3b914e5a83 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 15 Oct 2012 03:55:32 +0400 Subject: xtensa: ISS: fix specific simcalls Simcalls that take memory buffer definitely need wmb or rmb to make sure gcc doesn't optimize away code that fills the buffer. Signed-off-by: Max Filippov Signed-off-by: Chris Zankel --- arch/xtensa/platforms/iss/include/platform/simcall.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/xtensa/platforms/iss/include/platform/simcall.h b/arch/xtensa/platforms/iss/include/platform/simcall.h index 8c43bfea05e..bd78192e2fc 100644 --- a/arch/xtensa/platforms/iss/include/platform/simcall.h +++ b/arch/xtensa/platforms/iss/include/platform/simcall.h @@ -78,8 +78,9 @@ static inline int __simc(int a, int b, int c, int d, int e, int f) return ret; } -static inline int simc_open(char *file, int flags, int mode) +static inline int simc_open(const char *file, int flags, int mode) { + wmb(); return __simc(SYS_open, (int) file, flags, mode, 0, 0); } @@ -90,16 +91,19 @@ static inline int simc_close(int fd) static inline int simc_ioctl(int fd, int request, void *arg) { + wmb(); return __simc(SYS_ioctl, fd, request, (int) arg, 0, 0); } static inline int simc_read(int fd, void *buf, size_t count) { + rmb(); return __simc(SYS_read, fd, (int) buf, count, 0, 0); } -static inline int simc_write(int fd, void *buf, size_t count) +static inline int simc_write(int fd, const void *buf, size_t count) { + wmb(); return __simc(SYS_write, fd, (int) buf, count, 0, 0); } @@ -107,6 +111,7 @@ static inline int simc_poll(int fd) { struct timeval tv = { .tv_sec = 0, .tv_usec = 0 }; + wmb(); return __simc(SYS_select_one, fd, XTISS_SELECT_ONE_READ, (int)&tv, 0, 0); } -- cgit v1.2.3-70-g09d2 From c88d8df0cc69fe0238f2c805a87cc67fb27a43fe Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 15 Oct 2012 03:55:33 +0400 Subject: xtensa: ISS: fix rs_put_char ISS serial console prints garbage instead of symbols printed via rs_put_char. gcc optimizes away putting prined symbol into memory buffer because there's no evidence that the buffer is used afterwards. Make rs_put_char and rs_write use simc_write that has explicit wmb. Signed-off-by: Max Filippov Signed-off-by: Chris Zankel --- arch/xtensa/platforms/iss/console.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c index 8ab47edd7c8..7e74895eee0 100644 --- a/arch/xtensa/platforms/iss/console.c +++ b/arch/xtensa/platforms/iss/console.c @@ -91,7 +91,7 @@ static int rs_write(struct tty_struct * tty, { /* see drivers/char/serialX.c to reference original version */ - __simc (SYS_write, 1, (unsigned long)buf, count, 0, 0); + simc_write(1, buf, count); return count; } @@ -122,12 +122,7 @@ static void rs_poll(unsigned long priv) static int rs_put_char(struct tty_struct *tty, unsigned char ch) { - char buf[2]; - - buf[0] = ch; - buf[1] = '\0'; /* Is this NULL necessary? */ - __simc (SYS_write, 1, (unsigned long) buf, 1, 0, 0); - return 1; + return rs_write(tty, &ch, 1); } static void rs_flush_chars(struct tty_struct *tty) -- cgit v1.2.3-70-g09d2 From eae8a416afe140df4b054c448476654db0d46bde Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Mon, 15 Oct 2012 21:41:19 -0700 Subject: xtensa: fix memmove(), bcopy(), and memcpy(). - fix memmove to correctly handle overlapping src and dst; - fix memcpy loop ending conditions from signed '<=' to '!='; - modify bcopy to call memmove; Signed-off-by: Max Filippov Signed-off-by: Chris Zankel --- arch/xtensa/lib/memcopy.S | 309 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 284 insertions(+), 25 deletions(-) diff --git a/arch/xtensa/lib/memcopy.S b/arch/xtensa/lib/memcopy.S index ea59dcd0386..c48b80acb5f 100644 --- a/arch/xtensa/lib/memcopy.S +++ b/arch/xtensa/lib/memcopy.S @@ -6,7 +6,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2002 - 2005 Tensilica Inc. + * Copyright (C) 2002 - 2012 Tensilica Inc. */ #include @@ -27,14 +27,11 @@ #endif .endm - /* * void *memcpy(void *dst, const void *src, size_t len); - * void *memmove(void *dst, const void *src, size_t len); - * void *bcopy(const void *src, void *dst, size_t len); * * This function is intended to do the same thing as the standard - * library function memcpy() (or bcopy()) for most cases. + * library function memcpy() for most cases. * However, where the source and/or destination references * an instruction RAM or ROM or a data RAM or ROM, that * source and/or destination will always be accessed with @@ -45,9 +42,6 @@ * !!!!!!! Handling of IRAM/IROM has not yet * !!!!!!! been implemented. * - * The bcopy version is provided here to avoid the overhead - * of an extra call, for callers that require this convention. - * * The (general case) algorithm is as follows: * If destination is unaligned, align it by conditionally * copying 1 and 2 bytes. @@ -76,17 +70,6 @@ */ .text - .align 4 - .global bcopy - .type bcopy,@function -bcopy: - entry sp, 16 # minimal stack frame - # a2=src, a3=dst, a4=len - mov a5, a3 # copy dst so that a2 is return value - mov a3, a2 - mov a2, a5 - j .Lcommon # go to common code for memcpy+bcopy - /* * Byte by byte copy @@ -107,7 +90,7 @@ bcopy: s8i a6, a5, 0 addi a5, a5, 1 #if !XCHAL_HAVE_LOOPS - blt a3, a7, .Lnextbyte + bne a3, a7, .Lnextbyte # continue loop if $a3:src != $a7:src_end #endif /* !XCHAL_HAVE_LOOPS */ .Lbytecopydone: retw @@ -144,9 +127,6 @@ bcopy: .global memcpy .type memcpy,@function memcpy: - .global memmove - .type memmove,@function -memmove: entry sp, 16 # minimal stack frame # a2/ dst, a3/ src, a4/ len @@ -182,7 +162,7 @@ memmove: s32i a7, a5, 12 addi a5, a5, 16 #if !XCHAL_HAVE_LOOPS - blt a3, a8, .Loop1 + bne a3, a8, .Loop1 # continue loop if a3:src != a8:src_end #endif /* !XCHAL_HAVE_LOOPS */ .Loop1done: bbci.l a4, 3, .L2 @@ -260,7 +240,7 @@ memmove: s32i a9, a5, 12 addi a5, a5, 16 #if !XCHAL_HAVE_LOOPS - blt a3, a10, .Loop2 + bne a3, a10, .Loop2 # continue loop if a3:src != a10:src_end #endif /* !XCHAL_HAVE_LOOPS */ .Loop2done: bbci.l a4, 3, .L12 @@ -305,6 +285,285 @@ memmove: l8ui a6, a3, 0 s8i a6, a5, 0 retw + + +/* + * void bcopy(const void *src, void *dest, size_t n); + */ + .align 4 + .global bcopy + .type bcopy,@function +bcopy: + entry sp, 16 # minimal stack frame + # a2=src, a3=dst, a4=len + mov a5, a3 + mov a3, a2 + mov a2, a5 + j .Lmovecommon # go to common code for memmove+bcopy + +/* + * void *memmove(void *dst, const void *src, size_t len); + * + * This function is intended to do the same thing as the standard + * library function memmove() for most cases. + * However, where the source and/or destination references + * an instruction RAM or ROM or a data RAM or ROM, that + * source and/or destination will always be accessed with + * 32-bit load and store instructions (as required for these + * types of devices). + * + * !!!!!!! XTFIXME: + * !!!!!!! Handling of IRAM/IROM has not yet + * !!!!!!! been implemented. + * + * The (general case) algorithm is as follows: + * If end of source doesn't overlap destination then use memcpy. + * Otherwise do memcpy backwards. + * + * Register use: + * a0/ return address + * a1/ stack pointer + * a2/ return value + * a3/ src + * a4/ length + * a5/ dst + * a6/ tmp + * a7/ tmp + * a8/ tmp + * a9/ tmp + * a10/ tmp + * a11/ tmp + */ + +/* + * Byte by byte copy + */ + .align 4 + .byte 0 # 1 mod 4 alignment for LOOPNEZ + # (0 mod 4 alignment for LBEG) +.Lbackbytecopy: +#if XCHAL_HAVE_LOOPS + loopnez a4, .Lbackbytecopydone +#else /* !XCHAL_HAVE_LOOPS */ + beqz a4, .Lbackbytecopydone + sub a7, a3, a4 # a7 = start address for source +#endif /* !XCHAL_HAVE_LOOPS */ +.Lbacknextbyte: + addi a3, a3, -1 + l8ui a6, a3, 0 + addi a5, a5, -1 + s8i a6, a5, 0 +#if !XCHAL_HAVE_LOOPS + bne a3, a7, .Lbacknextbyte # continue loop if + # $a3:src != $a7:src_start +#endif /* !XCHAL_HAVE_LOOPS */ +.Lbackbytecopydone: + retw + +/* + * Destination is unaligned + */ + + .align 4 +.Lbackdst1mod2: # dst is only byte aligned + _bltui a4, 7, .Lbackbytecopy # do short copies byte by byte + + # copy 1 byte + addi a3, a3, -1 + l8ui a6, a3, 0 + addi a5, a5, -1 + s8i a6, a5, 0 + addi a4, a4, -1 + _bbci.l a5, 1, .Lbackdstaligned # if dst is now aligned, then + # return to main algorithm +.Lbackdst2mod4: # dst 16-bit aligned + # copy 2 bytes + _bltui a4, 6, .Lbackbytecopy # do short copies byte by byte + addi a3, a3, -2 + l8ui a6, a3, 0 + l8ui a7, a3, 1 + addi a5, a5, -2 + s8i a6, a5, 0 + s8i a7, a5, 1 + addi a4, a4, -2 + j .Lbackdstaligned # dst is now aligned, + # return to main algorithm + + .align 4 + .global memmove + .type memmove,@function +memmove: + + entry sp, 16 # minimal stack frame + # a2/ dst, a3/ src, a4/ len + mov a5, a2 # copy dst so that a2 is return value +.Lmovecommon: + sub a6, a5, a3 + bgeu a6, a4, .Lcommon + + add a5, a5, a4 + add a3, a3, a4 + + _bbsi.l a5, 0, .Lbackdst1mod2 # if dst is 1 mod 2 + _bbsi.l a5, 1, .Lbackdst2mod4 # if dst is 2 mod 4 +.Lbackdstaligned: # return here from .Lbackdst?mod? once dst is aligned + srli a7, a4, 4 # number of loop iterations with 16B + # per iteration + movi a8, 3 # if source is not aligned, + _bany a3, a8, .Lbacksrcunaligned # then use shifting copy + /* + * Destination and source are word-aligned, use word copy. + */ + # copy 16 bytes per iteration for word-aligned dst and word-aligned src +#if XCHAL_HAVE_LOOPS + loopnez a7, .backLoop1done +#else /* !XCHAL_HAVE_LOOPS */ + beqz a7, .backLoop1done + slli a8, a7, 4 + sub a8, a3, a8 # a8 = start of first 16B source chunk +#endif /* !XCHAL_HAVE_LOOPS */ +.backLoop1: + addi a3, a3, -16 + l32i a7, a3, 12 + l32i a6, a3, 8 + addi a5, a5, -16 + s32i a7, a5, 12 + l32i a7, a3, 4 + s32i a6, a5, 8 + l32i a6, a3, 0 + s32i a7, a5, 4 + s32i a6, a5, 0 +#if !XCHAL_HAVE_LOOPS + bne a3, a8, .backLoop1 # continue loop if a3:src != a8:src_start +#endif /* !XCHAL_HAVE_LOOPS */ +.backLoop1done: + bbci.l a4, 3, .Lback2 + # copy 8 bytes + addi a3, a3, -8 + l32i a6, a3, 0 + l32i a7, a3, 4 + addi a5, a5, -8 + s32i a6, a5, 0 + s32i a7, a5, 4 +.Lback2: + bbsi.l a4, 2, .Lback3 + bbsi.l a4, 1, .Lback4 + bbsi.l a4, 0, .Lback5 + retw +.Lback3: + # copy 4 bytes + addi a3, a3, -4 + l32i a6, a3, 0 + addi a5, a5, -4 + s32i a6, a5, 0 + bbsi.l a4, 1, .Lback4 + bbsi.l a4, 0, .Lback5 + retw +.Lback4: + # copy 2 bytes + addi a3, a3, -2 + l16ui a6, a3, 0 + addi a5, a5, -2 + s16i a6, a5, 0 + bbsi.l a4, 0, .Lback5 + retw +.Lback5: + # copy 1 byte + addi a3, a3, -1 + l8ui a6, a3, 0 + addi a5, a5, -1 + s8i a6, a5, 0 + retw + +/* + * Destination is aligned, Source is unaligned + */ + + .align 4 +.Lbacksrcunaligned: + _beqz a4, .Lbackdone # avoid loading anything for zero-length copies + # copy 16 bytes per iteration for word-aligned dst and unaligned src + ssa8 a3 # set shift amount from byte offset +#define SIM_CHECKS_ALIGNMENT 1 /* set to 1 when running on ISS with + * the lint or ferret client, or 0 + * to save a few cycles */ +#if XCHAL_UNALIGNED_LOAD_EXCEPTION || SIM_CHECKS_ALIGNMENT + and a11, a3, a8 # save unalignment offset for below + sub a3, a3, a11 # align a3 +#endif + l32i a6, a3, 0 # load first word +#if XCHAL_HAVE_LOOPS + loopnez a7, .backLoop2done +#else /* !XCHAL_HAVE_LOOPS */ + beqz a7, .backLoop2done + slli a10, a7, 4 + sub a10, a3, a10 # a10 = start of first 16B source chunk +#endif /* !XCHAL_HAVE_LOOPS */ +.backLoop2: + addi a3, a3, -16 + l32i a7, a3, 12 + l32i a8, a3, 8 + addi a5, a5, -16 + src_b a6, a7, a6 + s32i a6, a5, 12 + l32i a9, a3, 4 + src_b a7, a8, a7 + s32i a7, a5, 8 + l32i a6, a3, 0 + src_b a8, a9, a8 + s32i a8, a5, 4 + src_b a9, a6, a9 + s32i a9, a5, 0 +#if !XCHAL_HAVE_LOOPS + bne a3, a10, .backLoop2 # continue loop if a3:src != a10:src_start +#endif /* !XCHAL_HAVE_LOOPS */ +.backLoop2done: + bbci.l a4, 3, .Lback12 + # copy 8 bytes + addi a3, a3, -8 + l32i a7, a3, 4 + l32i a8, a3, 0 + addi a5, a5, -8 + src_b a6, a7, a6 + s32i a6, a5, 4 + src_b a7, a8, a7 + s32i a7, a5, 0 + mov a6, a8 +.Lback12: + bbci.l a4, 2, .Lback13 + # copy 4 bytes + addi a3, a3, -4 + l32i a7, a3, 0 + addi a5, a5, -4 + src_b a6, a7, a6 + s32i a6, a5, 0 + mov a6, a7 +.Lback13: +#if XCHAL_UNALIGNED_LOAD_EXCEPTION || SIM_CHECKS_ALIGNMENT + add a3, a3, a11 # readjust a3 with correct misalignment +#endif + bbsi.l a4, 1, .Lback14 + bbsi.l a4, 0, .Lback15 +.Lbackdone: + retw +.Lback14: + # copy 2 bytes + addi a3, a3, -2 + l8ui a6, a3, 0 + l8ui a7, a3, 1 + addi a5, a5, -2 + s8i a6, a5, 0 + s8i a7, a5, 1 + bbsi.l a4, 0, .Lback15 + retw +.Lback15: + # copy 1 byte + addi a3, a3, -1 + addi a5, a5, -1 + l8ui a6, a3, 0 + s8i a6, a5, 0 + retw + /* * Local Variables: -- cgit v1.2.3-70-g09d2 From 84ed30538b5d9a29a9612b93dd0a45d561624f82 Mon Sep 17 00:00:00 2001 From: Marc Gauthier Date: Mon, 15 Oct 2012 03:55:35 +0400 Subject: xtensa: copy_thread with CLONE_VM must not copy live parent AR windows When doing a fork (new VM), the new task has a mirror image of the parent's stack, so keeps the same live register windows etc. However when doing a clone with CLONE_VM, keeping the same VM (eg. when creating a new thread), the child starts afresh on a new stack -- it cannot share any part of the parent stack. It especially cannot have the same live AR windows as the parent, otherwise it will overwrite the parent stack on overflow, likely causing corruption. (and so it did...) Effectively, the register windows need to be spilled. Turns out it's much easier to simply not copy parent register windows when CLONE_VM is set. Signed-off-by: Marc Gauthier Signed-off-by: Max Filippov Signed-off-by: Chris Zankel --- arch/xtensa/kernel/process.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index bc020825cce..7901ee76b9b 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -173,6 +173,16 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) * * Note: This is a pristine frame, so we don't need any spill region on top of * childregs. + * + * The fun part: if we're keeping the same VM (i.e. cloning a thread, + * not an entire process), we're normally given a new usp, and we CANNOT share + * any live address register windows. If we just copy those live frames over, + * the two threads (parent and child) will overflow the same frames onto the + * parent stack at different times, likely corrupting the parent stack (esp. + * if the parent returns from functions that called clone() and calls new + * ones, before the child overflows its now old copies of its parent windows). + * One solution is to spill windows to the parent stack, but that's fairly + * involved. Much simpler to just not copy those live frames across. */ int copy_thread(unsigned long clone_flags, unsigned long usp, @@ -191,13 +201,14 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, else childregs = (struct pt_regs*)tos - 1; + /* This does not copy all the regs. In a bout of brilliance or madness, + ARs beyond a0-a15 exist past the end of the struct. */ *childregs = *regs; /* Create a call4 dummy-frame: a0 = 0, a1 = childregs. */ *((int*)childregs - 3) = (unsigned long)childregs; *((int*)childregs - 4) = 0; - childregs->areg[1] = tos; childregs->areg[2] = 0; p->set_child_tid = p->clear_child_tid = NULL; p->thread.ra = MAKE_RA_FOR_CALL((unsigned long)ret_from_fork, 0x1); @@ -205,10 +216,14 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, if (user_mode(regs)) { - int len = childregs->wmask & ~0xf; childregs->areg[1] = usp; - memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4], - ®s->areg[XCHAL_NUM_AREGS - len/4], len); + if (clone_flags & CLONE_VM) { + childregs->wmask = 1; /* can't share live windows */ + } else { + int len = childregs->wmask & ~0xf; + memcpy(&childregs->areg[XCHAL_NUM_AREGS - len/4], + ®s->areg[XCHAL_NUM_AREGS - len/4], len); + } // FIXME: we need to set THREADPTR in thread_info... if (clone_flags & CLONE_SETTLS) childregs->areg[2] = childregs->areg[6]; @@ -216,6 +231,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, } else { /* In kernel space, we start a new thread with a new stack. */ childregs->wmask = 1; + childregs->areg[1] = tos; } #if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS) -- cgit v1.2.3-70-g09d2 From 1bbedc3a7bf2a72b9b58ce1d171811db757b1940 Mon Sep 17 00:00:00 2001 From: Marc Gauthier Date: Mon, 15 Oct 2012 03:55:36 +0400 Subject: xtensa: fix missing return in do_page_fault for SIGBUS case Signed-off-by: Marc Gauthier Signed-off-by: Max Filippov Signed-off-by: Chris Zankel --- arch/xtensa/mm/fault.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c index 2c2f710ed1d..245b08f7eaf 100644 --- a/arch/xtensa/mm/fault.c +++ b/arch/xtensa/mm/fault.c @@ -6,7 +6,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2010 Tensilica Inc. * * Chris Zankel * Joe Taylor @@ -186,6 +186,7 @@ do_sigbus: /* Kernel mode? Handle exceptions or die */ if (!user_mode(regs)) bad_page_fault(regs, address, SIGBUS); + return; vmalloc_fault: { -- cgit v1.2.3-70-g09d2 From f4349b6e01c8927a04795885702a173b6a60573c Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 15 Oct 2012 03:55:37 +0400 Subject: xtensa: fix boot parameters parsing Boot parameter tags with handlers are ignored like this: [ 0.000000] Ignoring tag 0x00001003 [ 0.000000] Ignoring tag 0x00001001 [ 0.000000] Ignoring tag 0x00001004 because neither tagtable entries nor tag handlers appear in the vmlinux. Fix tagtable definition attributes so that tag entries are not dropped. Fix end of memory bank calculation in parse_tag_mem: it is intended to round down to page size, but instead did something strange leading to hang right after boot. Signed-off-by: Max Filippov Signed-off-by: Chris Zankel --- arch/xtensa/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index 270360d9806..b237988ba6d 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -100,7 +100,7 @@ typedef struct tagtable { } tagtable_t; #define __tagtable(tag, fn) static tagtable_t __tagtable_##fn \ - __attribute__((unused, __section__(".taglist"))) = { tag, fn } + __attribute__((used, section(".taglist"))) = { tag, fn } /* parse current tag */ @@ -120,7 +120,7 @@ static int __init parse_tag_mem(const bp_tag_t *tag) } sysmem.bank[sysmem.nr_banks].type = mi->type; sysmem.bank[sysmem.nr_banks].start = PAGE_ALIGN(mi->start); - sysmem.bank[sysmem.nr_banks].end = mi->end & PAGE_SIZE; + sysmem.bank[sysmem.nr_banks].end = mi->end & PAGE_MASK; sysmem.nr_banks++; return 0; -- cgit v1.2.3-70-g09d2 From bc5378fcba974317f9657c4fdc78af227e1e1068 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 15 Oct 2012 03:55:38 +0400 Subject: xtensa: reorganize SR referencing - reference SRs by names where possible, not by numbers; - get rid of __stringify around SR names where possible; - remove unneeded SR names from asm/regs.h; - add SREG_ prefix to remaining SR names; Signed-off-by: Max Filippov Signed-off-by: Chris Zankel --- arch/xtensa/boot/boot-redboot/bootstrap.S | 8 +- arch/xtensa/include/asm/atomic.h | 12 +- arch/xtensa/include/asm/cacheflush.h | 2 +- arch/xtensa/include/asm/cmpxchg.h | 4 +- arch/xtensa/include/asm/coprocessor.h | 5 +- arch/xtensa/include/asm/delay.h | 2 +- arch/xtensa/include/asm/irqflags.h | 4 +- arch/xtensa/include/asm/mmu_context.h | 4 +- arch/xtensa/include/asm/regs.h | 55 ++----- arch/xtensa/include/asm/timex.h | 8 +- arch/xtensa/include/asm/tlbflush.h | 8 +- arch/xtensa/kernel/align.S | 38 ++--- arch/xtensa/kernel/coprocessor.S | 20 +-- arch/xtensa/kernel/entry.S | 252 +++++++++++++++--------------- arch/xtensa/kernel/head.S | 36 ++--- arch/xtensa/kernel/irq.c | 6 +- arch/xtensa/kernel/traps.c | 18 +-- arch/xtensa/kernel/vectors.S | 44 +++--- arch/xtensa/platforms/iss/setup.c | 10 +- arch/xtensa/platforms/xt2000/setup.c | 10 +- 20 files changed, 254 insertions(+), 292 deletions(-) diff --git a/arch/xtensa/boot/boot-redboot/bootstrap.S b/arch/xtensa/boot/boot-redboot/bootstrap.S index 4c316cd28a5..86c34dbc9cd 100644 --- a/arch/xtensa/boot/boot-redboot/bootstrap.S +++ b/arch/xtensa/boot/boot-redboot/bootstrap.S @@ -51,17 +51,17 @@ _start: /* 'reset' window registers */ movi a4, 1 - wsr a4, PS + wsr a4, ps rsync - rsr a5, WINDOWBASE + rsr a5, windowbase ssl a5 sll a4, a4 - wsr a4, WINDOWSTART + wsr a4, windowstart rsync movi a4, 0x00040000 - wsr a4, PS + wsr a4, ps rsync /* copy the loader to its address diff --git a/arch/xtensa/include/asm/atomic.h b/arch/xtensa/include/asm/atomic.h index b4098930877..24f50cada70 100644 --- a/arch/xtensa/include/asm/atomic.h +++ b/arch/xtensa/include/asm/atomic.h @@ -73,7 +73,7 @@ static inline void atomic_add(int i, atomic_t * v) "l32i %0, %2, 0 \n\t" "add %0, %0, %1 \n\t" "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n" : "=&a" (vval) : "a" (i), "a" (v) @@ -97,7 +97,7 @@ static inline void atomic_sub(int i, atomic_t *v) "l32i %0, %2, 0 \n\t" "sub %0, %0, %1 \n\t" "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n" : "=&a" (vval) : "a" (i), "a" (v) @@ -118,7 +118,7 @@ static inline int atomic_add_return(int i, atomic_t * v) "l32i %0, %2, 0 \n\t" "add %0, %0, %1 \n\t" "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n" : "=&a" (vval) : "a" (i), "a" (v) @@ -137,7 +137,7 @@ static inline int atomic_sub_return(int i, atomic_t * v) "l32i %0, %2, 0 \n\t" "sub %0, %0, %1 \n\t" "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n" : "=&a" (vval) : "a" (i), "a" (v) @@ -260,7 +260,7 @@ static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) "xor %1, %4, %3 \n\t" "and %0, %0, %4 \n\t" "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n" : "=&a" (vval), "=a" (mask) : "a" (v), "a" (all_f), "1" (mask) @@ -277,7 +277,7 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v) "l32i %0, %2, 0 \n\t" "or %0, %0, %1 \n\t" "s32i %0, %2, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n" : "=&a" (vval) : "a" (mask), "a" (v) diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h index 376cd9d5f45..569fec4f9a2 100644 --- a/arch/xtensa/include/asm/cacheflush.h +++ b/arch/xtensa/include/asm/cacheflush.h @@ -165,7 +165,7 @@ extern void copy_from_user_page(struct vm_area_struct*, struct page*, static inline u32 xtensa_get_cacheattr(void) { u32 r; - asm volatile(" rsr %0, CACHEATTR" : "=a"(r)); + asm volatile(" rsr %0, cacheattr" : "=a"(r)); return r; } diff --git a/arch/xtensa/include/asm/cmpxchg.h b/arch/xtensa/include/asm/cmpxchg.h index e32149063d8..64dad04a9d2 100644 --- a/arch/xtensa/include/asm/cmpxchg.h +++ b/arch/xtensa/include/asm/cmpxchg.h @@ -27,7 +27,7 @@ __cmpxchg_u32(volatile int *p, int old, int new) "bne %0, %2, 1f \n\t" "s32i %3, %1, 0 \n\t" "1: \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n\t" : "=&a" (old) : "a" (p), "a" (old), "r" (new) @@ -97,7 +97,7 @@ static inline unsigned long xchg_u32(volatile int * m, unsigned long val) __asm__ __volatile__("rsil a15, "__stringify(LOCKLEVEL)"\n\t" "l32i %0, %1, 0 \n\t" "s32i %2, %1, 0 \n\t" - "wsr a15, "__stringify(PS)" \n\t" + "wsr a15, ps \n\t" "rsync \n\t" : "=&a" (tmp) : "a" (m), "a" (val) diff --git a/arch/xtensa/include/asm/coprocessor.h b/arch/xtensa/include/asm/coprocessor.h index 75c94a1658b..677501b32df 100644 --- a/arch/xtensa/include/asm/coprocessor.h +++ b/arch/xtensa/include/asm/coprocessor.h @@ -94,11 +94,10 @@ #if XCHAL_HAVE_CP #define RSR_CPENABLE(x) do { \ - __asm__ __volatile__("rsr %0," __stringify(CPENABLE) : "=a" (x)); \ + __asm__ __volatile__("rsr %0, cpenable" : "=a" (x)); \ } while(0); #define WSR_CPENABLE(x) do { \ - __asm__ __volatile__("wsr %0," __stringify(CPENABLE) "; rsync" \ - :: "a" (x)); \ + __asm__ __volatile__("wsr %0, cpenable; rsync" :: "a" (x)); \ } while(0); #endif /* XCHAL_HAVE_CP */ diff --git a/arch/xtensa/include/asm/delay.h b/arch/xtensa/include/asm/delay.h index e1d8c9e010c..58c0a4fd400 100644 --- a/arch/xtensa/include/asm/delay.h +++ b/arch/xtensa/include/asm/delay.h @@ -27,7 +27,7 @@ static inline void __delay(unsigned long loops) static __inline__ u32 xtensa_get_ccount(void) { u32 ccount; - asm volatile ("rsr %0, 234; # CCOUNT\n" : "=r" (ccount)); + asm volatile ("rsr %0, ccount\n" : "=r" (ccount)); return ccount; } diff --git a/arch/xtensa/include/asm/irqflags.h b/arch/xtensa/include/asm/irqflags.h index dae9a8bdcb1..f865b1c1eae 100644 --- a/arch/xtensa/include/asm/irqflags.h +++ b/arch/xtensa/include/asm/irqflags.h @@ -16,7 +16,7 @@ static inline unsigned long arch_local_save_flags(void) { unsigned long flags; - asm volatile("rsr %0,"__stringify(PS) : "=a" (flags)); + asm volatile("rsr %0, ps" : "=a" (flags)); return flags; } @@ -41,7 +41,7 @@ static inline void arch_local_irq_enable(void) static inline void arch_local_irq_restore(unsigned long flags) { - asm volatile("wsr %0, "__stringify(PS)" ; rsync" + asm volatile("wsr %0, ps; rsync" :: "a" (flags) : "memory"); } diff --git a/arch/xtensa/include/asm/mmu_context.h b/arch/xtensa/include/asm/mmu_context.h index dbd8731a876..feb10af9651 100644 --- a/arch/xtensa/include/asm/mmu_context.h +++ b/arch/xtensa/include/asm/mmu_context.h @@ -51,14 +51,14 @@ extern unsigned long asid_cache; static inline void set_rasid_register (unsigned long val) { - __asm__ __volatile__ (" wsr %0, "__stringify(RASID)"\n\t" + __asm__ __volatile__ (" wsr %0, rasid\n\t" " isync\n" : : "a" (val)); } static inline unsigned long get_rasid_register (void) { unsigned long tmp; - __asm__ __volatile__ (" rsr %0,"__stringify(RASID)"\n\t" : "=a" (tmp)); + __asm__ __volatile__ (" rsr %0, rasid\n\t" : "=a" (tmp)); return tmp; } diff --git a/arch/xtensa/include/asm/regs.h b/arch/xtensa/include/asm/regs.h index a3075b12aff..8a8aa61ccc8 100644 --- a/arch/xtensa/include/asm/regs.h +++ b/arch/xtensa/include/asm/regs.h @@ -27,52 +27,15 @@ /* Special registers. */ -#define LBEG 0 -#define LEND 1 -#define LCOUNT 2 -#define SAR 3 -#define BR 4 -#define SCOMPARE1 12 -#define ACCHI 16 -#define ACCLO 17 -#define MR 32 -#define WINDOWBASE 72 -#define WINDOWSTART 73 -#define PTEVADDR 83 -#define RASID 90 -#define ITLBCFG 91 -#define DTLBCFG 92 -#define IBREAKENABLE 96 -#define DDR 104 -#define IBREAKA 128 -#define DBREAKA 144 -#define DBREAKC 160 -#define EPC 176 -#define EPC_1 177 -#define DEPC 192 -#define EPS 192 -#define EPS_1 193 -#define EXCSAVE 208 -#define EXCSAVE_1 209 -#define INTERRUPT 226 -#define INTENABLE 228 -#define PS 230 -#define THREADPTR 231 -#define EXCCAUSE 232 -#define DEBUGCAUSE 233 -#define CCOUNT 234 -#define PRID 235 -#define ICOUNT 236 -#define ICOUNTLEVEL 237 -#define EXCVADDR 238 -#define CCOMPARE 240 -#define MISC_SR 244 - -/* Special names for read-only and write-only interrupt registers. */ - -#define INTREAD 226 -#define INTSET 226 -#define INTCLEAR 227 +#define SREG_MR 32 +#define SREG_IBREAKA 128 +#define SREG_DBREAKA 144 +#define SREG_DBREAKC 160 +#define SREG_EPC 176 +#define SREG_EPS 192 +#define SREG_EXCSAVE 208 +#define SREG_CCOMPARE 240 +#define SREG_MISC 244 /* EXCCAUSE register fields */ diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h index 053bc427210..175b3d5e1b0 100644 --- a/arch/xtensa/include/asm/timex.h +++ b/arch/xtensa/include/asm/timex.h @@ -63,10 +63,10 @@ extern cycles_t cacheflush_time; * Register access. */ -#define WSR_CCOUNT(r) asm volatile ("wsr %0,"__stringify(CCOUNT) :: "a" (r)) -#define RSR_CCOUNT(r) asm volatile ("rsr %0,"__stringify(CCOUNT) : "=a" (r)) -#define WSR_CCOMPARE(x,r) asm volatile ("wsr %0,"__stringify(CCOMPARE)"+"__stringify(x) :: "a"(r)) -#define RSR_CCOMPARE(x,r) asm volatile ("rsr %0,"__stringify(CCOMPARE)"+"__stringify(x) : "=a"(r)) +#define WSR_CCOUNT(r) asm volatile ("wsr %0, ccount" :: "a" (r)) +#define RSR_CCOUNT(r) asm volatile ("rsr %0, ccount" : "=a" (r)) +#define WSR_CCOMPARE(x,r) asm volatile ("wsr %0,"__stringify(SREG_CCOMPARE)"+"__stringify(x) :: "a"(r)) +#define RSR_CCOMPARE(x,r) asm volatile ("rsr %0,"__stringify(SREG_CCOMPARE)"+"__stringify(x) : "=a"(r)) static inline unsigned long get_ccount (void) { diff --git a/arch/xtensa/include/asm/tlbflush.h b/arch/xtensa/include/asm/tlbflush.h index 46d240074f7..43dd348a5a4 100644 --- a/arch/xtensa/include/asm/tlbflush.h +++ b/arch/xtensa/include/asm/tlbflush.h @@ -86,26 +86,26 @@ static inline void invalidate_dtlb_entry_no_isync (unsigned entry) static inline void set_itlbcfg_register (unsigned long val) { - __asm__ __volatile__("wsr %0, "__stringify(ITLBCFG)"\n\t" "isync\n\t" + __asm__ __volatile__("wsr %0, itlbcfg\n\t" "isync\n\t" : : "a" (val)); } static inline void set_dtlbcfg_register (unsigned long val) { - __asm__ __volatile__("wsr %0, "__stringify(DTLBCFG)"; dsync\n\t" + __asm__ __volatile__("wsr %0, dtlbcfg; dsync\n\t" : : "a" (val)); } static inline void set_ptevaddr_register (unsigned long val) { - __asm__ __volatile__(" wsr %0, "__stringify(PTEVADDR)"; isync\n" + __asm__ __volatile__(" wsr %0, ptevaddr; isync\n" : : "a" (val)); } static inline unsigned long read_ptevaddr_register (void) { unsigned long tmp; - __asm__ __volatile__("rsr %0, "__stringify(PTEVADDR)"\n\t" : "=a" (tmp)); + __asm__ __volatile__("rsr %0, ptevaddr\n\t" : "=a" (tmp)); return tmp; } diff --git a/arch/xtensa/kernel/align.S b/arch/xtensa/kernel/align.S index 33d6e9d2e83..934ae58e2c7 100644 --- a/arch/xtensa/kernel/align.S +++ b/arch/xtensa/kernel/align.S @@ -170,15 +170,15 @@ ENTRY(fast_unaligned) s32i a7, a2, PT_AREG7 s32i a8, a2, PT_AREG8 - rsr a0, DEPC - xsr a3, EXCSAVE_1 + rsr a0, depc + xsr a3, excsave1 s32i a0, a2, PT_AREG2 s32i a3, a2, PT_AREG3 /* Keep value of SAR in a0 */ - rsr a0, SAR - rsr a8, EXCVADDR # load unaligned memory address + rsr a0, sar + rsr a8, excvaddr # load unaligned memory address /* Now, identify one of the following load/store instructions. * @@ -197,7 +197,7 @@ ENTRY(fast_unaligned) /* Extract the instruction that caused the unaligned access. */ - rsr a7, EPC_1 # load exception address + rsr a7, epc1 # load exception address movi a3, ~3 and a3, a3, a7 # mask lower bits @@ -275,16 +275,16 @@ ENTRY(fast_unaligned) 1: #if XCHAL_HAVE_LOOPS - rsr a5, LEND # check if we reached LEND + rsr a5, lend # check if we reached LEND bne a7, a5, 1f - rsr a5, LCOUNT # and LCOUNT != 0 + rsr a5, lcount # and LCOUNT != 0 beqz a5, 1f addi a5, a5, -1 # decrement LCOUNT and set - rsr a7, LBEG # set PC to LBEGIN - wsr a5, LCOUNT + rsr a7, lbeg # set PC to LBEGIN + wsr a5, lcount #endif -1: wsr a7, EPC_1 # skip load instruction +1: wsr a7, epc1 # skip load instruction extui a4, a4, INSN_T, 4 # extract target register movi a5, .Lload_table addx8 a4, a4, a5 @@ -355,16 +355,16 @@ ENTRY(fast_unaligned) 1: #if XCHAL_HAVE_LOOPS - rsr a4, LEND # check if we reached LEND + rsr a4, lend # check if we reached LEND bne a7, a4, 1f - rsr a4, LCOUNT # and LCOUNT != 0 + rsr a4, lcount # and LCOUNT != 0 beqz a4, 1f addi a4, a4, -1 # decrement LCOUNT and set - rsr a7, LBEG # set PC to LBEGIN - wsr a4, LCOUNT + rsr a7, lbeg # set PC to LBEGIN + wsr a4, lcount #endif -1: wsr a7, EPC_1 # skip store instruction +1: wsr a7, epc1 # skip store instruction movi a4, ~3 and a4, a4, a8 # align memory address @@ -406,7 +406,7 @@ ENTRY(fast_unaligned) .Lexit: movi a4, 0 - rsr a3, EXCSAVE_1 + rsr a3, excsave1 s32i a4, a3, EXC_TABLE_FIXUP /* Restore working register */ @@ -420,7 +420,7 @@ ENTRY(fast_unaligned) /* restore SAR and return */ - wsr a0, SAR + wsr a0, sar l32i a0, a2, PT_AREG0 l32i a2, a2, PT_AREG2 rfe @@ -438,10 +438,10 @@ ENTRY(fast_unaligned) l32i a6, a2, PT_AREG6 l32i a5, a2, PT_AREG5 l32i a4, a2, PT_AREG4 - wsr a0, SAR + wsr a0, sar mov a1, a2 - rsr a0, PS + rsr a0, ps bbsi.l a2, PS_UM_BIT, 1f # jump if user mode movi a0, _kernel_exception diff --git a/arch/xtensa/kernel/coprocessor.S b/arch/xtensa/kernel/coprocessor.S index 2bc1e145c0a..54c3be313bf 100644 --- a/arch/xtensa/kernel/coprocessor.S +++ b/arch/xtensa/kernel/coprocessor.S @@ -43,7 +43,7 @@ /* IO protection is currently unsupported. */ ENTRY(fast_io_protect) - wsr a0, EXCSAVE_1 + wsr a0, excsave1 movi a0, unrecoverable_exception callx0 a0 @@ -220,7 +220,7 @@ ENTRY(coprocessor_restore) */ ENTRY(fast_coprocessor_double) - wsr a0, EXCSAVE_1 + wsr a0, excsave1 movi a0, unrecoverable_exception callx0 a0 @@ -229,13 +229,13 @@ ENTRY(fast_coprocessor) /* Save remaining registers a1-a3 and SAR */ - xsr a3, EXCSAVE_1 + xsr a3, excsave1 s32i a3, a2, PT_AREG3 - rsr a3, SAR + rsr a3, sar s32i a1, a2, PT_AREG1 s32i a3, a2, PT_SAR mov a1, a2 - rsr a2, DEPC + rsr a2, depc s32i a2, a1, PT_AREG2 /* @@ -248,17 +248,17 @@ ENTRY(fast_coprocessor) /* Find coprocessor number. Subtract first CP EXCCAUSE from EXCCAUSE */ - rsr a3, EXCCAUSE + rsr a3, exccause addi a3, a3, -EXCCAUSE_COPROCESSOR0_DISABLED /* Set corresponding CPENABLE bit -> (sar:cp-index, a3: 1< 0,3,6,9 srli a1, a1, PAGE_SHIFT extui a3, a3, 2, 2 # -> 0,0,1,2 @@ -1583,18 +1583,18 @@ ENTRY(fast_second_level_miss) l32i a0, a2, PT_AREG0 l32i a1, a2, PT_AREG1 l32i a2, a2, PT_DEPC - xsr a3, EXCSAVE_1 + xsr a3, excsave1 bgeui a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f /* Restore excsave1 and return. */ - rsr a2, DEPC + rsr a2, depc rfe /* Return from double exception. */ -1: xsr a2, DEPC +1: xsr a2, depc esync rfde @@ -1618,7 +1618,7 @@ ENTRY(fast_second_level_miss) /* Make sure the exception originated in the special functions */ movi a0, __tlbtemp_mapping_start - rsr a3, EPC_1 + rsr a3, epc1 bltu a3, a0, 2f movi a0, __tlbtemp_mapping_end bgeu a3, a0, 2f @@ -1626,7 +1626,7 @@ ENTRY(fast_second_level_miss) /* Check if excvaddr was in one of the TLBTEMP_BASE areas. */ movi a3, TLBTEMP_BASE_1 - rsr a0, EXCVADDR + rsr a0, excvaddr bltu a0, a3, 2f addi a1, a0, -(2 << (DCACHE_ALIAS_ORDER + PAGE_SHIFT)) @@ -1635,7 +1635,7 @@ ENTRY(fast_second_level_miss) /* Check if we have to restore an ITLB mapping. */ movi a1, __tlbtemp_mapping_itlb - rsr a3, EPC_1 + rsr a3, epc1 sub a3, a3, a1 /* Calculate VPN */ @@ -1671,13 +1671,13 @@ ENTRY(fast_second_level_miss) 2: /* Invalid PGD, default exception handling */ movi a3, exc_table - rsr a1, DEPC - xsr a3, EXCSAVE_1 + rsr a1, depc + xsr a3, excsave1 s32i a1, a2, PT_AREG2 s32i a3, a2, PT_AREG3 mov a1, a2 - rsr a2, PS + rsr a2, ps bbsi.l a2, PS_UM_BIT, 1f j _kernel_exception 1: j _user_exception @@ -1712,7 +1712,7 @@ ENTRY(fast_store_prohibited) l32i a0, a1, TASK_MM # tsk->mm beqz a0, 9f -8: rsr a1, EXCVADDR # fault address +8: rsr a1, excvaddr # fault address _PGD_OFFSET(a0, a1, a4) l32i a0, a0, 0 beqz a0, 2f @@ -1725,7 +1725,7 @@ ENTRY(fast_store_prohibited) movi a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HW_WRITE or a4, a4, a1 - rsr a1, EXCVADDR + rsr a1, excvaddr s32i a4, a0, 0 /* We need to flush the cache if we have page coloring. */ @@ -1749,15 +1749,15 @@ ENTRY(fast_store_prohibited) /* Restore excsave1 and a3. */ - xsr a3, EXCSAVE_1 + xsr a3, excsave1 bgeui a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f - rsr a2, DEPC + rsr a2, depc rfe /* Double exception. Restore FIXUP handler and return. */ -1: xsr a2, DEPC +1: xsr a2, depc esync rfde @@ -1766,14 +1766,14 @@ ENTRY(fast_store_prohibited) 2: /* If there was a problem, handle fault in C */ - rsr a4, DEPC # still holds a2 - xsr a3, EXCSAVE_1 + rsr a4, depc # still holds a2 + xsr a3, excsave1 s32i a4, a2, PT_AREG2 s32i a3, a2, PT_AREG3 l32i a4, a2, PT_AREG4 mov a1, a2 - rsr a2, PS + rsr a2, ps bbsi.l a2, PS_UM_BIT, 1f j _kernel_exception 1: j _user_exception @@ -1901,8 +1901,8 @@ ENTRY(_switch_to) /* Disable ints while we manipulate the stack pointer. */ movi a14, (1 << PS_EXCM_BIT) | LOCKLEVEL - xsr a14, PS - rsr a3, EXCSAVE_1 + xsr a14, ps + rsr a3, excsave1 rsync s32i a3, a3, EXC_TABLE_FIXUP /* enter critical section */ @@ -1910,7 +1910,7 @@ ENTRY(_switch_to) #if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS) l32i a3, a5, THREAD_CPENABLE - xsr a3, CPENABLE + xsr a3, cpenable s32i a3, a4, THREAD_CPENABLE #endif @@ -1924,7 +1924,7 @@ ENTRY(_switch_to) * we return from kernel space. */ - rsr a3, EXCSAVE_1 # exc_table + rsr a3, excsave1 # exc_table movi a6, 0 addi a7, a5, PT_REGS_OFFSET s32i a6, a3, EXC_TABLE_FIXUP @@ -1937,7 +1937,7 @@ ENTRY(_switch_to) load_xtregs_user a5 a6 a8 a9 a10 a11 THREAD_XTREGS_USER - wsr a14, PS + wsr a14, ps mov a2, a12 # return 'prev' rsync diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S index 3ef91a73652..bdc50788f35 100644 --- a/arch/xtensa/kernel/head.S +++ b/arch/xtensa/kernel/head.S @@ -61,18 +61,18 @@ _startup: /* Disable interrupts and exceptions. */ movi a0, LOCKLEVEL - wsr a0, PS + wsr a0, ps /* Preserve the pointer to the boot parameter list in EXCSAVE_1 */ - wsr a2, EXCSAVE_1 + wsr a2, excsave1 /* Start with a fresh windowbase and windowstart. */ movi a1, 1 movi a0, 0 - wsr a1, WINDOWSTART - wsr a0, WINDOWBASE + wsr a1, windowstart + wsr a0, windowbase rsync /* Set a0 to 0 for the remaining initialization. */ @@ -82,46 +82,46 @@ _startup: /* Clear debugging registers. */ #if XCHAL_HAVE_DEBUG - wsr a0, IBREAKENABLE - wsr a0, ICOUNT + wsr a0, ibreakenable + wsr a0, icount movi a1, 15 - wsr a0, ICOUNTLEVEL + wsr a0, icountlevel .set _index, 0 .rept XCHAL_NUM_DBREAK - 1 - wsr a0, DBREAKC + _index + wsr a0, SREG_DBREAKC + _index .set _index, _index + 1 .endr #endif /* Clear CCOUNT (not really necessary, but nice) */ - wsr a0, CCOUNT # not really necessary, but nice + wsr a0, ccount # not really necessary, but nice /* Disable zero-loops. */ #if XCHAL_HAVE_LOOPS - wsr a0, LCOUNT + wsr a0, lcount #endif /* Disable all timers. */ .set _index, 0 .rept XCHAL_NUM_TIMERS - 1 - wsr a0, CCOMPARE + _index + wsr a0, SREG_CCOMPARE + _index .set _index, _index + 1 .endr /* Interrupt initialization. */ movi a2, XCHAL_INTTYPE_MASK_SOFTWARE | XCHAL_INTTYPE_MASK_EXTERN_EDGE - wsr a0, INTENABLE - wsr a2, INTCLEAR + wsr a0, intenable + wsr a2, intclear /* Disable coprocessors. */ #if XCHAL_CP_NUM > 0 - wsr a0, CPENABLE + wsr a0, cpenable #endif /* Set PS.INTLEVEL=1, PS.WOE=0, kernel stack, PS.EXCM=0 @@ -132,7 +132,7 @@ _startup: */ movi a1, 1 - wsr a1, PS + wsr a1, ps rsync /* Initialize the caches. @@ -206,18 +206,18 @@ _startup: addi a1, a1, KERNEL_STACK_SIZE movi a2, 0x00040001 # WOE=1, INTLEVEL=1, UM=0 - wsr a2, PS # (enable reg-windows; progmode stack) + wsr a2, ps # (enable reg-windows; progmode stack) rsync /* Set up EXCSAVE[DEBUGLEVEL] to point to the Debug Exception Handler.*/ movi a2, debug_exception - wsr a2, EXCSAVE + XCHAL_DEBUGLEVEL + wsr a2, SREG_EXCSAVE + XCHAL_DEBUGLEVEL /* Set up EXCSAVE[1] to point to the exc_table. */ movi a6, exc_table - xsr a6, EXCSAVE_1 + xsr a6, excsave1 /* init_arch kick-starts the linux kernel */ diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c index 98e77c3ef1c..a6ce3e56373 100644 --- a/arch/xtensa/kernel/irq.c +++ b/arch/xtensa/kernel/irq.c @@ -72,13 +72,13 @@ int arch_show_interrupts(struct seq_file *p, int prec) static void xtensa_irq_mask(struct irq_data *d) { cached_irq_mask &= ~(1 << d->irq); - set_sr (cached_irq_mask, INTENABLE); + set_sr (cached_irq_mask, intenable); } static void xtensa_irq_unmask(struct irq_data *d) { cached_irq_mask |= 1 << d->irq; - set_sr (cached_irq_mask, INTENABLE); + set_sr (cached_irq_mask, intenable); } static void xtensa_irq_enable(struct irq_data *d) @@ -95,7 +95,7 @@ static void xtensa_irq_disable(struct irq_data *d) static void xtensa_irq_ack(struct irq_data *d) { - set_sr(1 << d->irq, INTCLEAR); + set_sr(1 << d->irq, intclear); } static int xtensa_irq_retrigger(struct irq_data *d) diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index bc1e14cf936..92ba9f83eaa 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -202,8 +202,8 @@ extern void do_IRQ(int, struct pt_regs *); void do_interrupt (struct pt_regs *regs) { - unsigned long intread = get_sr (INTREAD); - unsigned long intenable = get_sr (INTENABLE); + unsigned long intread = get_sr (interrupt); + unsigned long intenable = get_sr (intenable); int i, mask; /* Handle all interrupts (no priorities). @@ -213,7 +213,7 @@ void do_interrupt (struct pt_regs *regs) for (i=0, mask = 1; i < XCHAL_NUM_INTERRUPTS; i++, mask <<= 1) { if (mask & (intread & intenable)) { - set_sr (mask, INTCLEAR); + set_sr (mask, intclear); do_IRQ (i,regs); } } @@ -339,7 +339,7 @@ void __init trap_init(void) /* Initialize EXCSAVE_1 to hold the address of the exception table. */ i = (unsigned long)exc_table; - __asm__ __volatile__("wsr %0, "__stringify(EXCSAVE_1)"\n" : : "a" (i)); + __asm__ __volatile__("wsr %0, excsave1\n" : : "a" (i)); } /* @@ -386,16 +386,16 @@ static inline void spill_registers(void) unsigned int a0, ps; __asm__ __volatile__ ( - "movi a14," __stringify (PS_EXCM_BIT) " | 1\n\t" + "movi a14, " __stringify(PS_EXCM_BIT | 1) "\n\t" "mov a12, a0\n\t" - "rsr a13," __stringify(SAR) "\n\t" - "xsr a14," __stringify(PS) "\n\t" + "rsr a13, sar\n\t" + "xsr a14, ps\n\t" "movi a0, _spill_registers\n\t" "rsync\n\t" "callx0 a0\n\t" "mov a0, a12\n\t" - "wsr a13," __stringify(SAR) "\n\t" - "wsr a14," __stringify(PS) "\n\t" + "wsr a13, sar\n\t" + "wsr a14, ps\n\t" :: "a" (&a0), "a" (&ps) : "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15", "memory"); } diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S index 70066e3582d..4462c1e595c 100644 --- a/arch/xtensa/kernel/vectors.S +++ b/arch/xtensa/kernel/vectors.S @@ -69,11 +69,11 @@ ENTRY(_UserExceptionVector) - xsr a3, EXCSAVE_1 # save a3 and get dispatch table - wsr a2, DEPC # save a2 + xsr a3, excsave1 # save a3 and get dispatch table + wsr a2, depc # save a2 l32i a2, a3, EXC_TABLE_KSTK # load kernel stack to a2 s32i a0, a2, PT_AREG0 # save a0 to ESF - rsr a0, EXCCAUSE # retrieve exception cause + rsr a0, exccause # retrieve exception cause s32i a0, a2, PT_DEPC # mark it as a regular exception addx4 a0, a0, a3 # find entry in table l32i a0, a0, EXC_TABLE_FAST_USER # load handler @@ -93,11 +93,11 @@ ENTRY(_UserExceptionVector) ENTRY(_KernelExceptionVector) - xsr a3, EXCSAVE_1 # save a3, and get dispatch table - wsr a2, DEPC # save a2 + xsr a3, excsave1 # save a3, and get dispatch table + wsr a2, depc # save a2 addi a2, a1, -16-PT_SIZE # adjust stack pointer s32i a0, a2, PT_AREG0 # save a0 to ESF - rsr a0, EXCCAUSE # retrieve exception cause + rsr a0, exccause # retrieve exception cause s32i a0, a2, PT_DEPC # mark it as a regular exception addx4 a0, a0, a3 # find entry in table l32i a0, a0, EXC_TABLE_FAST_KERNEL # load handler address @@ -205,17 +205,17 @@ ENTRY(_DoubleExceptionVector) /* Deliberately destroy excsave (don't assume it's value was valid). */ - wsr a3, EXCSAVE_1 # save a3 + wsr a3, excsave1 # save a3 /* Check for kernel double exception (usually fatal). */ - rsr a3, PS + rsr a3, ps _bbci.l a3, PS_UM_BIT, .Lksp /* Check if we are currently handling a window exception. */ /* Note: We don't need to indicate that we enter a critical section. */ - xsr a0, DEPC # get DEPC, save a0 + xsr a0, depc # get DEPC, save a0 movi a3, XCHAL_WINDOW_VECTORS_VADDR _bltu a0, a3, .Lfixup @@ -243,21 +243,21 @@ ENTRY(_DoubleExceptionVector) * Note: We can trash the current window frame (a0...a3) and depc! */ - wsr a2, DEPC # save stack pointer temporarily - rsr a0, PS + wsr a2, depc # save stack pointer temporarily + rsr a0, ps extui a0, a0, PS_OWB_SHIFT, 4 - wsr a0, WINDOWBASE + wsr a0, windowbase rsync /* We are now in the previous window frame. Save registers again. */ - xsr a2, DEPC # save a2 and get stack pointer + xsr a2, depc # save a2 and get stack pointer s32i a0, a2, PT_AREG0 - wsr a3, EXCSAVE_1 # save a3 + wsr a3, excsave1 # save a3 movi a3, exc_table - rsr a0, EXCCAUSE + rsr a0, exccause s32i a0, a2, PT_DEPC # mark it as a regular exception addx4 a0, a0, a3 l32i a0, a0, EXC_TABLE_FAST_USER @@ -290,14 +290,14 @@ ENTRY(_DoubleExceptionVector) /* a0: depc, a1: a1, a2: kstk, a3: a2, depc: a0, excsave: a3 */ - xsr a3, DEPC + xsr a3, depc s32i a0, a2, PT_DEPC s32i a3, a2, PT_AREG0 /* a0: avail, a1: a1, a2: kstk, a3: avail, depc: a2, excsave: a3 */ movi a3, exc_table - rsr a0, EXCCAUSE + rsr a0, exccause addx4 a0, a0, a3 l32i a0, a0, EXC_TABLE_FAST_USER jx a0 @@ -312,7 +312,7 @@ ENTRY(_DoubleExceptionVector) .Lksp: /* a0: a0, a1: a1, a2: a2, a3: trashed, depc: depc, excsave: a3 */ - rsr a3, EXCCAUSE + rsr a3, exccause beqi a3, EXCCAUSE_ITLB_MISS, 1f addi a3, a3, -EXCCAUSE_DTLB_MISS bnez a3, .Lunrecoverable @@ -328,11 +328,11 @@ ENTRY(_DoubleExceptionVector) .Lunrecoverable_fixup: l32i a2, a3, EXC_TABLE_DOUBLE_SAVE - xsr a0, DEPC + xsr a0, depc .Lunrecoverable: - rsr a3, EXCSAVE_1 - wsr a0, EXCSAVE_1 + rsr a3, excsave1 + wsr a0, excsave1 movi a0, unrecoverable_exception callx0 a0 @@ -349,7 +349,7 @@ ENTRY(_DoubleExceptionVector) .section .DebugInterruptVector.text, "ax" ENTRY(_DebugInterruptVector) - xsr a0, EXCSAVE + XCHAL_DEBUGLEVEL + xsr a0, SREG_EXCSAVE + XCHAL_DEBUGLEVEL jx a0 diff --git a/arch/xtensa/platforms/iss/setup.c b/arch/xtensa/platforms/iss/setup.c index 927acf378ea..e1700102f35 100644 --- a/arch/xtensa/platforms/iss/setup.c +++ b/arch/xtensa/platforms/iss/setup.c @@ -61,13 +61,13 @@ void platform_restart(void) * jump to the reset vector. */ __asm__ __volatile__("movi a2, 15\n\t" - "wsr a2, " __stringify(ICOUNTLEVEL) "\n\t" + "wsr a2, icountlevel\n\t" "movi a2, 0\n\t" - "wsr a2, " __stringify(ICOUNT) "\n\t" - "wsr a2, " __stringify(IBREAKENABLE) "\n\t" - "wsr a2, " __stringify(LCOUNT) "\n\t" + "wsr a2, icount\n\t" + "wsr a2, ibreakenable\n\t" + "wsr a2, lcount\n\t" "movi a2, 0x1f\n\t" - "wsr a2, " __stringify(PS) "\n\t" + "wsr a2, ps\n\t" "isync\n\t" "jx %0\n\t" : diff --git a/arch/xtensa/platforms/xt2000/setup.c b/arch/xtensa/platforms/xt2000/setup.c index 9e83940ac26..c7d90f17886 100644 --- a/arch/xtensa/platforms/xt2000/setup.c +++ b/arch/xtensa/platforms/xt2000/setup.c @@ -66,13 +66,13 @@ void platform_restart(void) * jump to the reset vector. */ __asm__ __volatile__ ("movi a2, 15\n\t" - "wsr a2, " __stringify(ICOUNTLEVEL) "\n\t" + "wsr a2, icountlevel\n\t" "movi a2, 0\n\t" - "wsr a2, " __stringify(ICOUNT) "\n\t" - "wsr a2, " __stringify(IBREAKENABLE) "\n\t" - "wsr a2, " __stringify(LCOUNT) "\n\t" + "wsr a2, icount\n\t" + "wsr a2, ibreakenable\n\t" + "wsr a2, lcount\n\t" "movi a2, 0x1f\n\t" - "wsr a2, " __stringify(PS) "\n\t" + "wsr a2, ps\n\t" "isync\n\t" "jx %0\n\t" : -- cgit v1.2.3-70-g09d2 From 4ded6282caa0b6d0cfa79124610aae1194aa649b Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 15 Oct 2012 21:23:02 +0400 Subject: xtensa: fix unaligned usermode access - correct use of .config #define name; CONFIG_UNALIGNED_USER ---> CONFIG_XTENSA_UNALIGNED_USER Signed-off-by: Max Filippov Signed-off-by: Pete Delaney Signed-off-by: Chris Zankel --- arch/xtensa/kernel/traps.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index 92ba9f83eaa..5caf2b64d43 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -97,7 +97,7 @@ static dispatch_init_table_t __initdata dispatch_init_table[] = { /* EXCCAUSE_INTEGER_DIVIDE_BY_ZERO unhandled */ /* EXCCAUSE_PRIVILEGED unhandled */ #if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION -#ifdef CONFIG_UNALIGNED_USER +#ifdef CONFIG_XTENSA_UNALIGNED_USER { EXCCAUSE_UNALIGNED, USER, fast_unaligned }, #else { EXCCAUSE_UNALIGNED, 0, do_unaligned_user }, @@ -244,7 +244,7 @@ do_illegal_instruction(struct pt_regs *regs) */ #if XCHAL_UNALIGNED_LOAD_EXCEPTION || XCHAL_UNALIGNED_STORE_EXCEPTION -#ifndef CONFIG_UNALIGNED_USER +#ifndef CONFIG_XTENSA_UNALIGNED_USER void do_unaligned_user (struct pt_regs *regs) { -- cgit v1.2.3-70-g09d2 From 83596729adbca4ff3b0273de22e166c64aea49ec Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 15 Oct 2012 03:55:40 +0400 Subject: UAPI: (Scripted) Disintegrate arch/xtensa/include/asm UAPI: (Scripted) Disintegrate arch/xtensa/include/asm Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones Signed-off-by: Max Filippov Signed-off-by: Chris Zankel --- arch/xtensa/include/asm/Kbuild | 1 - arch/xtensa/include/asm/auxvec.h | 4 - arch/xtensa/include/asm/bitsperlong.h | 1 - arch/xtensa/include/asm/byteorder.h | 12 - arch/xtensa/include/asm/errno.h | 16 - arch/xtensa/include/asm/fcntl.h | 1 - arch/xtensa/include/asm/ioctl.h | 1 - arch/xtensa/include/asm/ioctls.h | 120 ----- arch/xtensa/include/asm/ipcbuf.h | 37 -- arch/xtensa/include/asm/kvm_para.h | 1 - arch/xtensa/include/asm/mman.h | 96 ---- arch/xtensa/include/asm/msgbuf.h | 48 -- arch/xtensa/include/asm/param.h | 20 +- arch/xtensa/include/asm/poll.h | 20 - arch/xtensa/include/asm/posix_types.h | 39 -- arch/xtensa/include/asm/ptrace.h | 66 +-- arch/xtensa/include/asm/resource.h | 16 - arch/xtensa/include/asm/sembuf.h | 44 -- arch/xtensa/include/asm/setup.h | 18 - arch/xtensa/include/asm/shmbuf.h | 71 --- arch/xtensa/include/asm/sigcontext.h | 28 -- arch/xtensa/include/asm/siginfo.h | 16 - arch/xtensa/include/asm/signal.h | 134 +----- arch/xtensa/include/asm/socket.h | 83 ---- arch/xtensa/include/asm/sockios.h | 31 -- arch/xtensa/include/asm/stat.h | 59 --- arch/xtensa/include/asm/statfs.h | 17 - arch/xtensa/include/asm/swab.h | 70 --- arch/xtensa/include/asm/termbits.h | 220 --------- arch/xtensa/include/asm/termios.h | 43 +- arch/xtensa/include/asm/types.h | 15 +- arch/xtensa/include/asm/unistd.h | 702 +--------------------------- arch/xtensa/include/uapi/asm/Kbuild | 31 ++ arch/xtensa/include/uapi/asm/auxvec.h | 4 + arch/xtensa/include/uapi/asm/bitsperlong.h | 1 + arch/xtensa/include/uapi/asm/byteorder.h | 12 + arch/xtensa/include/uapi/asm/errno.h | 16 + arch/xtensa/include/uapi/asm/fcntl.h | 1 + arch/xtensa/include/uapi/asm/ioctl.h | 1 + arch/xtensa/include/uapi/asm/ioctls.h | 120 +++++ arch/xtensa/include/uapi/asm/ipcbuf.h | 37 ++ arch/xtensa/include/uapi/asm/kvm_para.h | 1 + arch/xtensa/include/uapi/asm/mman.h | 96 ++++ arch/xtensa/include/uapi/asm/msgbuf.h | 48 ++ arch/xtensa/include/uapi/asm/param.h | 30 ++ arch/xtensa/include/uapi/asm/poll.h | 20 + arch/xtensa/include/uapi/asm/posix_types.h | 39 ++ arch/xtensa/include/uapi/asm/ptrace.h | 77 ++++ arch/xtensa/include/uapi/asm/resource.h | 16 + arch/xtensa/include/uapi/asm/sembuf.h | 44 ++ arch/xtensa/include/uapi/asm/setup.h | 18 + arch/xtensa/include/uapi/asm/shmbuf.h | 71 +++ arch/xtensa/include/uapi/asm/sigcontext.h | 28 ++ arch/xtensa/include/uapi/asm/siginfo.h | 16 + arch/xtensa/include/uapi/asm/signal.h | 148 ++++++ arch/xtensa/include/uapi/asm/socket.h | 83 ++++ arch/xtensa/include/uapi/asm/sockios.h | 31 ++ arch/xtensa/include/uapi/asm/stat.h | 59 +++ arch/xtensa/include/uapi/asm/statfs.h | 17 + arch/xtensa/include/uapi/asm/swab.h | 70 +++ arch/xtensa/include/uapi/asm/termbits.h | 220 +++++++++ arch/xtensa/include/uapi/asm/termios.h | 56 +++ arch/xtensa/include/uapi/asm/types.h | 28 ++ arch/xtensa/include/uapi/asm/unistd.h | 704 +++++++++++++++++++++++++++++ arch/xtensa/kernel/syscall.c | 1 - 65 files changed, 2150 insertions(+), 2044 deletions(-) delete mode 100644 arch/xtensa/include/asm/auxvec.h delete mode 100644 arch/xtensa/include/asm/bitsperlong.h delete mode 100644 arch/xtensa/include/asm/byteorder.h delete mode 100644 arch/xtensa/include/asm/errno.h delete mode 100644 arch/xtensa/include/asm/fcntl.h delete mode 100644 arch/xtensa/include/asm/ioctl.h delete mode 100644 arch/xtensa/include/asm/ioctls.h delete mode 100644 arch/xtensa/include/asm/ipcbuf.h delete mode 100644 arch/xtensa/include/asm/kvm_para.h delete mode 100644 arch/xtensa/include/asm/mman.h delete mode 100644 arch/xtensa/include/asm/msgbuf.h delete mode 100644 arch/xtensa/include/asm/poll.h delete mode 100644 arch/xtensa/include/asm/posix_types.h delete mode 100644 arch/xtensa/include/asm/resource.h delete mode 100644 arch/xtensa/include/asm/sembuf.h delete mode 100644 arch/xtensa/include/asm/setup.h delete mode 100644 arch/xtensa/include/asm/shmbuf.h delete mode 100644 arch/xtensa/include/asm/sigcontext.h delete mode 100644 arch/xtensa/include/asm/siginfo.h delete mode 100644 arch/xtensa/include/asm/socket.h delete mode 100644 arch/xtensa/include/asm/sockios.h delete mode 100644 arch/xtensa/include/asm/stat.h delete mode 100644 arch/xtensa/include/asm/statfs.h delete mode 100644 arch/xtensa/include/asm/swab.h delete mode 100644 arch/xtensa/include/asm/termbits.h create mode 100644 arch/xtensa/include/uapi/asm/auxvec.h create mode 100644 arch/xtensa/include/uapi/asm/bitsperlong.h create mode 100644 arch/xtensa/include/uapi/asm/byteorder.h create mode 100644 arch/xtensa/include/uapi/asm/errno.h create mode 100644 arch/xtensa/include/uapi/asm/fcntl.h create mode 100644 arch/xtensa/include/uapi/asm/ioctl.h create mode 100644 arch/xtensa/include/uapi/asm/ioctls.h create mode 100644 arch/xtensa/include/uapi/asm/ipcbuf.h create mode 100644 arch/xtensa/include/uapi/asm/kvm_para.h create mode 100644 arch/xtensa/include/uapi/asm/mman.h create mode 100644 arch/xtensa/include/uapi/asm/msgbuf.h create mode 100644 arch/xtensa/include/uapi/asm/param.h create mode 100644 arch/xtensa/include/uapi/asm/poll.h create mode 100644 arch/xtensa/include/uapi/asm/posix_types.h create mode 100644 arch/xtensa/include/uapi/asm/ptrace.h create mode 100644 arch/xtensa/include/uapi/asm/resource.h create mode 100644 arch/xtensa/include/uapi/asm/sembuf.h create mode 100644 arch/xtensa/include/uapi/asm/setup.h create mode 100644 arch/xtensa/include/uapi/asm/shmbuf.h create mode 100644 arch/xtensa/include/uapi/asm/sigcontext.h create mode 100644 arch/xtensa/include/uapi/asm/siginfo.h create mode 100644 arch/xtensa/include/uapi/asm/signal.h create mode 100644 arch/xtensa/include/uapi/asm/socket.h create mode 100644 arch/xtensa/include/uapi/asm/sockios.h create mode 100644 arch/xtensa/include/uapi/asm/stat.h create mode 100644 arch/xtensa/include/uapi/asm/statfs.h create mode 100644 arch/xtensa/include/uapi/asm/swab.h create mode 100644 arch/xtensa/include/uapi/asm/termbits.h create mode 100644 arch/xtensa/include/uapi/asm/termios.h create mode 100644 arch/xtensa/include/uapi/asm/types.h create mode 100644 arch/xtensa/include/uapi/asm/unistd.h diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild index fccd81eddff..4a159da2363 100644 --- a/arch/xtensa/include/asm/Kbuild +++ b/arch/xtensa/include/asm/Kbuild @@ -1,4 +1,3 @@ -include include/asm-generic/Kbuild.asm generic-y += clkdev.h generic-y += exec.h diff --git a/arch/xtensa/include/asm/auxvec.h b/arch/xtensa/include/asm/auxvec.h deleted file mode 100644 index 257dec75c5a..00000000000 --- a/arch/xtensa/include/asm/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __XTENSA_AUXVEC_H -#define __XTENSA_AUXVEC_H - -#endif diff --git a/arch/xtensa/include/asm/bitsperlong.h b/arch/xtensa/include/asm/bitsperlong.h deleted file mode 100644 index 6dc0bb0c13b..00000000000 --- a/arch/xtensa/include/asm/bitsperlong.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/byteorder.h b/arch/xtensa/include/asm/byteorder.h deleted file mode 100644 index 54eb6315349..00000000000 --- a/arch/xtensa/include/asm/byteorder.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _XTENSA_BYTEORDER_H -#define _XTENSA_BYTEORDER_H - -#ifdef __XTENSA_EL__ -#include -#elif defined(__XTENSA_EB__) -#include -#else -# error processor byte order undefined! -#endif - -#endif /* _XTENSA_BYTEORDER_H */ diff --git a/arch/xtensa/include/asm/errno.h b/arch/xtensa/include/asm/errno.h deleted file mode 100644 index a0f3b96b79b..00000000000 --- a/arch/xtensa/include/asm/errno.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/errno.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_ERRNO_H -#define _XTENSA_ERRNO_H - -#include - -#endif /* _XTENSA_ERRNO_H */ diff --git a/arch/xtensa/include/asm/fcntl.h b/arch/xtensa/include/asm/fcntl.h deleted file mode 100644 index 46ab12db573..00000000000 --- a/arch/xtensa/include/asm/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/ioctl.h b/arch/xtensa/include/asm/ioctl.h deleted file mode 100644 index b279fe06dfe..00000000000 --- a/arch/xtensa/include/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/ioctls.h b/arch/xtensa/include/asm/ioctls.h deleted file mode 100644 index 2aa4cd9f0ce..00000000000 --- a/arch/xtensa/include/asm/ioctls.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * include/asm-xtensa/ioctls.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 - 2005 Tensilica Inc. - * - * Derived from "include/asm-i386/ioctls.h" - */ - -#ifndef _XTENSA_IOCTLS_H -#define _XTENSA_IOCTLS_H - -#include - -#define FIOCLEX _IO('f', 1) -#define FIONCLEX _IO('f', 2) -#define FIOASYNC _IOW('f', 125, int) -#define FIONBIO _IOW('f', 126, int) -#define FIONREAD _IOR('f', 127, int) -#define TIOCINQ FIONREAD -#define FIOQSIZE _IOR('f', 128, loff_t) - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 - -#define TCGETA _IOR('t', 23, struct termio) -#define TCSETA _IOW('t', 24, struct termio) -#define TCSETAW _IOW('t', 25, struct termio) -#define TCSETAF _IOW('t', 28, struct termio) - -#define TCSBRK _IO('t', 29) -#define TCXONC _IO('t', 30) -#define TCFLSH _IO('t', 31) - -#define TIOCSWINSZ _IOW('t', 103, struct winsize) -#define TIOCGWINSZ _IOR('t', 104, struct winsize) -#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ -#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ -#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ - -#define TIOCSPGRP _IOW('t', 118, int) -#define TIOCGPGRP _IOR('t', 119, int) - -#define TIOCEXCL _IO('T', 12) -#define TIOCNXCL _IO('T', 13) -#define TIOCSCTTY _IO('T', 14) - -#define TIOCSTI _IOW('T', 18, char) -#define TIOCMGET _IOR('T', 21, unsigned int) -#define TIOCMBIS _IOW('T', 22, unsigned int) -#define TIOCMBIC _IOW('T', 23, unsigned int) -#define TIOCMSET _IOW('T', 24, unsigned int) -# define TIOCM_LE 0x001 -# define TIOCM_DTR 0x002 -# define TIOCM_RTS 0x004 -# define TIOCM_ST 0x008 -# define TIOCM_SR 0x010 -# define TIOCM_CTS 0x020 -# define TIOCM_CAR 0x040 -# define TIOCM_RNG 0x080 -# define TIOCM_DSR 0x100 -# define TIOCM_CD TIOCM_CAR -# define TIOCM_RI TIOCM_RNG - -#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) -#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) -#define TIOCLINUX _IOW('T', 28, char) -#define TIOCCONS _IO('T', 29) -#define TIOCGSERIAL 0x803C541E /*_IOR('T', 30, struct serial_struct)*/ -#define TIOCSSERIAL 0x403C541F /*_IOW('T', 31, struct serial_struct)*/ -#define TIOCPKT _IOW('T', 32, int) -# define TIOCPKT_DATA 0 -# define TIOCPKT_FLUSHREAD 1 -# define TIOCPKT_FLUSHWRITE 2 -# define TIOCPKT_STOP 4 -# define TIOCPKT_START 8 -# define TIOCPKT_NOSTOP 16 -# define TIOCPKT_DOSTOP 32 -# define TIOCPKT_IOCTL 64 - - -#define TIOCNOTTY _IO('T', 34) -#define TIOCSETD _IOW('T', 35, int) -#define TIOCGETD _IOR('T', 36, int) -#define TCSBRKP _IOW('T', 37, int) /* Needed for POSIX tcsendbreak()*/ -#define TIOCTTYGSTRUCT _IOR('T', 38, struct tty_struct) /* For debugging only*/ -#define TIOCSBRK _IO('T', 39) /* BSD compatibility */ -#define TIOCCBRK _IO('T', 40) /* BSD compatibility */ -#define TIOCGSID _IOR('T', 41, pid_t) /* Return the session ID of FD*/ -#define TCGETS2 _IOR('T', 42, struct termios2) -#define TCSETS2 _IOW('T', 43, struct termios2) -#define TCSETSW2 _IOW('T', 44, struct termios2) -#define TCSETSF2 _IOW('T', 45, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ -#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ -#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ -#define TIOCVHANGUP _IO('T', 0x37) - -#define TIOCSERCONFIG _IO('T', 83) -#define TIOCSERGWILD _IOR('T', 84, int) -#define TIOCSERSWILD _IOW('T', 85, int) -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* Get line status reg. */ - /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ -# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ -#define TIOCSERGETMULTI _IOR('T', 90, struct serial_multiport_struct) /* Get multiport config */ -#define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* Set multiport config */ - -#define TIOCMIWAIT _IO('T', 92) /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ - -#endif /* _XTENSA_IOCTLS_H */ diff --git a/arch/xtensa/include/asm/ipcbuf.h b/arch/xtensa/include/asm/ipcbuf.h deleted file mode 100644 index c33aa6a4214..00000000000 --- a/arch/xtensa/include/asm/ipcbuf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * include/asm-xtensa/ipcbuf.h - * - * The ipc64_perm structure for the Xtensa architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_IPCBUF_H -#define _XTENSA_IPCBUF_H - -/* - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned long seq; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _XTENSA_IPCBUF_H */ diff --git a/arch/xtensa/include/asm/kvm_para.h b/arch/xtensa/include/asm/kvm_para.h deleted file mode 100644 index 14fab8f0b95..00000000000 --- a/arch/xtensa/include/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/mman.h b/arch/xtensa/include/asm/mman.h deleted file mode 100644 index 25bc6c1309c..00000000000 --- a/arch/xtensa/include/asm/mman.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * include/asm-xtensa/mman.h - * - * Xtensa Processor memory-manager definitions - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 by Ralf Baechle - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_MMAN_H -#define _XTENSA_MMAN_H - -/* - * Protections are chosen from these bits, OR'd together. The - * implementation does not necessarily support PROT_EXEC or PROT_WRITE - * without PROT_READ. The only guarantees are that no writing will be - * allowed without PROT_WRITE and no access will be allowed for PROT_NONE. - */ - -#define PROT_NONE 0x0 /* page can not be accessed */ -#define PROT_READ 0x1 /* page can be read */ -#define PROT_WRITE 0x2 /* page can be written */ -#define PROT_EXEC 0x4 /* page can be executed */ - -#define PROT_SEM 0x10 /* page may be used for atomic ops */ -#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ -#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end fo growsup vma */ - -/* - * Flags for mmap - */ -#define MAP_SHARED 0x001 /* Share changes */ -#define MAP_PRIVATE 0x002 /* Changes are private */ -#define MAP_TYPE 0x00f /* Mask for type of mapping */ -#define MAP_FIXED 0x010 /* Interpret addr exactly */ - -/* not used by linux, but here to make sure we don't clash with ABI defines */ -#define MAP_RENAME 0x020 /* Assign page to file */ -#define MAP_AUTOGROW 0x040 /* File may grow by writing */ -#define MAP_LOCAL 0x080 /* Copy on fork/sproc */ -#define MAP_AUTORSRV 0x100 /* Logical swap reserved on demand */ - -/* These are linux-specific */ -#define MAP_NORESERVE 0x0400 /* don't check for reservations */ -#define MAP_ANONYMOUS 0x0800 /* don't use a file */ -#define MAP_GROWSDOWN 0x1000 /* stack-like segment */ -#define MAP_DENYWRITE 0x2000 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x4000 /* mark it as an executable */ -#define MAP_LOCKED 0x8000 /* pages are locked */ -#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x20000 /* do not block on IO */ -#define MAP_STACK 0x40000 /* give out an address that is best suited for process/thread stacks */ -#define MAP_HUGETLB 0x80000 /* create a huge page mapping */ - -/* - * Flags for msync - */ -#define MS_ASYNC 0x0001 /* sync memory asynchronously */ -#define MS_INVALIDATE 0x0002 /* invalidate mappings & caches */ -#define MS_SYNC 0x0004 /* synchronous memory sync */ - -/* - * Flags for mlockall - */ -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#define MADV_NORMAL 0 /* no further special treatment */ -#define MADV_RANDOM 1 /* expect random page references */ -#define MADV_SEQUENTIAL 2 /* expect sequential page references */ -#define MADV_WILLNEED 3 /* will need these pages */ -#define MADV_DONTNEED 4 /* don't need these pages */ - -/* common parameters: try to keep these consistent across architectures */ -#define MADV_REMOVE 9 /* remove these pages & resources */ -#define MADV_DONTFORK 10 /* don't inherit across fork */ -#define MADV_DOFORK 11 /* do inherit across fork */ - -#define MADV_MERGEABLE 12 /* KSM may merge identical pages */ -#define MADV_UNMERGEABLE 13 /* KSM may not merge identical pages */ - -#define MADV_HUGEPAGE 14 /* Worth backing with hugepages */ -#define MADV_NOHUGEPAGE 15 /* Not worth backing with hugepages */ - -#define MADV_DONTDUMP 16 /* Explicity exclude from the core dump, - overrides the coredump filter bits */ -#define MADV_DODUMP 17 /* Clear the MADV_NODUMP flag */ - -/* compatibility flags */ -#define MAP_FILE 0 - -#endif /* _XTENSA_MMAN_H */ diff --git a/arch/xtensa/include/asm/msgbuf.h b/arch/xtensa/include/asm/msgbuf.h deleted file mode 100644 index 693c9675528..00000000000 --- a/arch/xtensa/include/asm/msgbuf.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-xtensa/msgbuf.h - * - * The msqid64_ds structure for the Xtensa architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - */ - -#ifndef _XTENSA_MSGBUF_H -#define _XTENSA_MSGBUF_H - -struct msqid64_ds { - struct ipc64_perm msg_perm; -#ifdef __XTENSA_EB__ - unsigned int __unused1; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned int __unused2; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned int __unused3; - __kernel_time_t msg_ctime; /* last change time */ -#elif defined(__XTENSA_EL__) - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned int __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned int __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned int __unused3; -#else -# error processor byte order undefined! -#endif - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _XTENSA_MSGBUF_H */ diff --git a/arch/xtensa/include/asm/param.h b/arch/xtensa/include/asm/param.h index ba03d5aeab6..0a70e780ef2 100644 --- a/arch/xtensa/include/asm/param.h +++ b/arch/xtensa/include/asm/param.h @@ -7,28 +7,12 @@ * * Copyright (C) 2001 - 2005 Tensilica Inc. */ - #ifndef _XTENSA_PARAM_H #define _XTENSA_PARAM_H -#ifdef __KERNEL__ +#include + # define HZ CONFIG_HZ /* internal timer frequency */ # define USER_HZ 100 /* for user interfaces in "ticks" */ # define CLOCKS_PER_SEC (USER_HZ) /* frequnzy at which times() counts */ -#else -# define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NGROUPS -#define NGROUPS 32 -#endif - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - #endif /* _XTENSA_PARAM_H */ diff --git a/arch/xtensa/include/asm/poll.h b/arch/xtensa/include/asm/poll.h deleted file mode 100644 index 9d2d5993f06..00000000000 --- a/arch/xtensa/include/asm/poll.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * include/asm-xtensa/poll.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_POLL_H -#define _XTENSA_POLL_H - -#define POLLWRNORM POLLOUT -#define POLLWRBAND 0x0100 -#define POLLREMOVE 0x0800 - -#include - -#endif /* _XTENSA_POLL_H */ diff --git a/arch/xtensa/include/asm/posix_types.h b/arch/xtensa/include/asm/posix_types.h deleted file mode 100644 index 6e96be0d02d..00000000000 --- a/arch/xtensa/include/asm/posix_types.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-xtensa/posix_types.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Largely copied from include/asm-ppc/posix_types.h - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_POSIX_TYPES_H -#define _XTENSA_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned short __kernel_ipc_pid_t; -#define __kernel_ipc_pid_t __kernel_ipc_pid_t - -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef long __kernel_ptrdiff_t; -#define __kernel_size_t __kernel_size_t - -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -#define __kernel_old_uid_t __kernel_old_uid_t - -typedef unsigned short __kernel_old_dev_t; -#define __kernel_old_dev_t __kernel_old_dev_t - -#include - -#endif /* _XTENSA_POSIX_TYPES_H */ diff --git a/arch/xtensa/include/asm/ptrace.h b/arch/xtensa/include/asm/ptrace.h index d85d38da8ee..da21c17f23a 100644 --- a/arch/xtensa/include/asm/ptrace.h +++ b/arch/xtensa/include/asm/ptrace.h @@ -7,73 +7,11 @@ * * Copyright (C) 2001 - 2005 Tensilica Inc. */ - #ifndef _XTENSA_PTRACE_H #define _XTENSA_PTRACE_H -/* - * Kernel stack - * - * +-----------------------+ -------- STACK_SIZE - * | register file | | - * +-----------------------+ | - * | struct pt_regs | | - * +-----------------------+ | ------ PT_REGS_OFFSET - * double : 16 bytes spill area : | ^ - * excetion :- - - - - - - - - - - -: | | - * frame : struct pt_regs : | | - * :- - - - - - - - - - - -: | | - * | | | | - * | memory stack | | | - * | | | | - * ~ ~ ~ ~ - * ~ ~ ~ ~ - * | | | | - * | | | | - * +-----------------------+ | | --- STACK_BIAS - * | struct task_struct | | | ^ - * current --> +-----------------------+ | | | - * | struct thread_info | | | | - * +-----------------------+ -------- - */ - -#define KERNEL_STACK_SIZE (2 * PAGE_SIZE) - -/* Offsets for exception_handlers[] (3 x 64-entries x 4-byte tables). */ - -#define EXC_TABLE_KSTK 0x004 /* Kernel Stack */ -#define EXC_TABLE_DOUBLE_SAVE 0x008 /* Double exception save area for a0 */ -#define EXC_TABLE_FIXUP 0x00c /* Fixup handler */ -#define EXC_TABLE_PARAM 0x010 /* For passing a parameter to fixup */ -#define EXC_TABLE_SYSCALL_SAVE 0x014 /* For fast syscall handler */ -#define EXC_TABLE_FAST_USER 0x100 /* Fast user exception handler */ -#define EXC_TABLE_FAST_KERNEL 0x200 /* Fast kernel exception handler */ -#define EXC_TABLE_DEFAULT 0x300 /* Default C-Handler */ -#define EXC_TABLE_SIZE 0x400 +#include -/* Registers used by strace */ - -#define REG_A_BASE 0x0000 -#define REG_AR_BASE 0x0100 -#define REG_PC 0x0020 -#define REG_PS 0x02e6 -#define REG_WB 0x0248 -#define REG_WS 0x0249 -#define REG_LBEG 0x0200 -#define REG_LEND 0x0201 -#define REG_LCOUNT 0x0202 -#define REG_SAR 0x0203 - -#define SYSCALL_NR 0x00ff - -/* Other PTRACE_ values defined in using values 0-9,16,17,24 */ - -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETXTREGS 18 -#define PTRACE_SETXTREGS 19 - -#ifdef __KERNEL__ #ifndef __ASSEMBLY__ @@ -132,6 +70,4 @@ struct pt_regs { #endif /* !__ASSEMBLY__ */ -#endif /* __KERNEL__ */ - #endif /* _XTENSA_PTRACE_H */ diff --git a/arch/xtensa/include/asm/resource.h b/arch/xtensa/include/asm/resource.h deleted file mode 100644 index 17b5ab31177..00000000000 --- a/arch/xtensa/include/asm/resource.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/resource.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_RESOURCE_H -#define _XTENSA_RESOURCE_H - -#include - -#endif /* _XTENSA_RESOURCE_H */ diff --git a/arch/xtensa/include/asm/sembuf.h b/arch/xtensa/include/asm/sembuf.h deleted file mode 100644 index c15870493b3..00000000000 --- a/arch/xtensa/include/asm/sembuf.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-xtensa/sembuf.h - * - * The semid64_ds structure for Xtensa architecture. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - * - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - * - */ - -#ifndef _XTENSA_SEMBUF_H -#define _XTENSA_SEMBUF_H - -#include - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ -#ifdef __XTENSA_EL__ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; -#else - unsigned long __unused1; - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused2; - __kernel_time_t sem_ctime; /* last change time */ -#endif - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* __ASM_XTENSA_SEMBUF_H */ diff --git a/arch/xtensa/include/asm/setup.h b/arch/xtensa/include/asm/setup.h deleted file mode 100644 index 9fa8ad97936..00000000000 --- a/arch/xtensa/include/asm/setup.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * include/asm-xtensa/setup.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SETUP_H -#define _XTENSA_SETUP_H - -#define COMMAND_LINE_SIZE 256 - -extern void set_except_vector(int n, void *addr); - -#endif diff --git a/arch/xtensa/include/asm/shmbuf.h b/arch/xtensa/include/asm/shmbuf.h deleted file mode 100644 index ad4b0121782..00000000000 --- a/arch/xtensa/include/asm/shmbuf.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * include/asm-xtensa/shmbuf.h - * - * The shmid64_ds structure for Xtensa architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SHMBUF_H -#define _XTENSA_SHMBUF_H - -#if defined (__XTENSA_EL__) -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; -#elif defined (__XTENSA_EB__) -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; -#else -# error endian order not defined -#endif - - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _XTENSA_SHMBUF_H */ diff --git a/arch/xtensa/include/asm/sigcontext.h b/arch/xtensa/include/asm/sigcontext.h deleted file mode 100644 index 03383af8c3b..00000000000 --- a/arch/xtensa/include/asm/sigcontext.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * include/asm-xtensa/sigcontext.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2007 Tensilica Inc. - */ - -#ifndef _XTENSA_SIGCONTEXT_H -#define _XTENSA_SIGCONTEXT_H - - -struct sigcontext { - unsigned long sc_pc; - unsigned long sc_ps; - unsigned long sc_lbeg; - unsigned long sc_lend; - unsigned long sc_lcount; - unsigned long sc_sar; - unsigned long sc_acclo; - unsigned long sc_acchi; - unsigned long sc_a[16]; - void *sc_xtregs; -}; - -#endif /* _XTENSA_SIGCONTEXT_H */ diff --git a/arch/xtensa/include/asm/siginfo.h b/arch/xtensa/include/asm/siginfo.h deleted file mode 100644 index 6916248295d..00000000000 --- a/arch/xtensa/include/asm/siginfo.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/siginfo.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SIGINFO_H -#define _XTENSA_SIGINFO_H - -#include - -#endif /* _XTENSA_SIGINFO_H */ diff --git a/arch/xtensa/include/asm/signal.h b/arch/xtensa/include/asm/signal.h index 7f201b9d419..72fd44c85b7 100644 --- a/arch/xtensa/include/asm/signal.h +++ b/arch/xtensa/include/asm/signal.h @@ -9,117 +9,12 @@ * * Copyright (C) 2001 - 2005 Tensilica Inc. */ - #ifndef _XTENSA_SIGNAL_H #define _XTENSA_SIGNAL_H - -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -#ifndef __ASSEMBLY__ - -#include - -/* Avoid too many header ordering problems. */ -struct siginfo; -typedef unsigned long old_sigset_t; /* at least 32 bits */ -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#endif - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* #define SIGLOST 29 */ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX (_NSIG-1) - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 +#include #ifndef __ASSEMBLY__ - -#define SIG_BLOCK 0 /* for blocking signals */ -#define SIG_UNBLOCK 1 /* for unblocking signals */ -#define SIG_SETMASK 2 /* for setting the signal mask */ - -/* Type of a signal handler. */ -typedef void (*__sighandler_t)(int); - -#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ -#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ -#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ - -#ifdef __KERNEL__ struct sigaction { __sighandler_t sa_handler; unsigned long sa_flags; @@ -131,35 +26,8 @@ struct k_sigaction { struct sigaction sa; }; -#else - -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ #include #define ptrace_signal_deliver(regs, cookie) do { } while (0) -#endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ #endif /* _XTENSA_SIGNAL_H */ diff --git a/arch/xtensa/include/asm/socket.h b/arch/xtensa/include/asm/socket.h deleted file mode 100644 index e36c6818492..00000000000 --- a/arch/xtensa/include/asm/socket.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * include/asm-xtensa/socket.h - * - * Copied from i386. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef _XTENSA_SOCKET_H -#define _XTENSA_SOCKET_H - -#include - -/* For setsockoptions(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ - -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ - -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#define SO_PROTOCOL 38 -#define SO_DOMAIN 39 - -#define SO_RXQ_OVFL 40 - -#define SO_WIFI_STATUS 41 -#define SCM_WIFI_STATUS SO_WIFI_STATUS -#define SO_PEEK_OFF 42 - -/* Instruct lower device to use last 4-bytes of skb data as FCS */ -#define SO_NOFCS 43 - -#endif /* _XTENSA_SOCKET_H */ diff --git a/arch/xtensa/include/asm/sockios.h b/arch/xtensa/include/asm/sockios.h deleted file mode 100644 index efe0af379f0..00000000000 --- a/arch/xtensa/include/asm/sockios.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * include/asm-xtensa/sockios.h - * - * Socket-level I/O control calls. Copied from MIPS. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 by Ralf Baechle - * Copyright (C) 2001 Tensilica Inc. - */ - -#ifndef _XTENSA_SOCKIOS_H -#define _XTENSA_SOCKIOS_H - -#include - -/* Socket-level I/O control calls. */ - -#define FIOGETOWN _IOR('f', 123, int) -#define FIOSETOWN _IOW('f', 124, int) - -#define SIOCATMARK _IOR('s', 7, int) -#define SIOCSPGRP _IOW('s', 8, pid_t) -#define SIOCGPGRP _IOR('s', 9, pid_t) - -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _XTENSA_SOCKIOS_H */ diff --git a/arch/xtensa/include/asm/stat.h b/arch/xtensa/include/asm/stat.h deleted file mode 100644 index c4992038cee..00000000000 --- a/arch/xtensa/include/asm/stat.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * include/asm-xtensa/stat.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2007 Tensilica Inc. - */ - -#ifndef _XTENSA_STAT_H -#define _XTENSA_STAT_H - -#define STAT_HAVE_NSEC 1 - -struct stat { - unsigned long st_dev; - unsigned long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - unsigned int st_uid; - unsigned int st_gid; - unsigned long st_rdev; - long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -struct stat64 { - unsigned long long st_dev; /* Device */ - unsigned long long st_ino; /* File serial number */ - unsigned int st_mode; /* File mode. */ - unsigned int st_nlink; /* Link count. */ - unsigned int st_uid; /* User ID of the file's owner. */ - unsigned int st_gid; /* Group ID of the file's group. */ - unsigned long long st_rdev; /* Device number, if device. */ - long long st_size; /* Size of file, in bytes. */ - unsigned long st_blksize; /* Optimal block size for I/O. */ - unsigned long __unused2; - unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long st_atime; /* Time of last access. */ - unsigned long st_atime_nsec; - unsigned long st_mtime; /* Time of last modification. */ - unsigned long st_mtime_nsec; - unsigned long st_ctime; /* Time of last status change. */ - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _XTENSA_STAT_H */ diff --git a/arch/xtensa/include/asm/statfs.h b/arch/xtensa/include/asm/statfs.h deleted file mode 100644 index 9c3d1a21313..00000000000 --- a/arch/xtensa/include/asm/statfs.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-xtensa/statfs.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_STATFS_H -#define _XTENSA_STATFS_H - -#include - -#endif /* _XTENSA_STATFS_H */ - diff --git a/arch/xtensa/include/asm/swab.h b/arch/xtensa/include/asm/swab.h deleted file mode 100644 index 226a3916231..00000000000 --- a/arch/xtensa/include/asm/swab.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * include/asm-xtensa/swab.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SWAB_H -#define _XTENSA_SWAB_H - -#include -#include - -#define __SWAB_64_THRU_32__ - -static inline __attribute_const__ __u32 __arch_swab32(__u32 x) -{ - __u32 res; - /* instruction sequence from Xtensa ISA release 2/2000 */ - __asm__("ssai 8 \n\t" - "srli %0, %1, 16 \n\t" - "src %0, %0, %1 \n\t" - "src %0, %0, %0 \n\t" - "src %0, %1, %0 \n" - : "=&a" (res) - : "a" (x) - ); - return res; -} -#define __arch_swab32 __arch_swab32 - -static inline __attribute_const__ __u16 __arch_swab16(__u16 x) -{ - /* Given that 'short' values are signed (i.e., can be negative), - * we cannot assume that the upper 16-bits of the register are - * zero. We are careful to mask values after shifting. - */ - - /* There exists an anomaly between xt-gcc and xt-xcc. xt-gcc - * inserts an extui instruction after putting this function inline - * to ensure that it uses only the least-significant 16 bits of - * the result. xt-xcc doesn't use an extui, but assumes the - * __asm__ macro follows convention that the upper 16 bits of an - * 'unsigned short' result are still zero. This macro doesn't - * follow convention; indeed, it leaves garbage in the upport 16 - * bits of the register. - - * Declaring the temporary variables 'res' and 'tmp' to be 32-bit - * types while the return type of the function is a 16-bit type - * forces both compilers to insert exactly one extui instruction - * (or equivalent) to mask off the upper 16 bits. */ - - __u32 res; - __u32 tmp; - - __asm__("extui %1, %2, 8, 8\n\t" - "slli %0, %2, 8 \n\t" - "or %0, %0, %1 \n" - : "=&a" (res), "=&a" (tmp) - : "a" (x) - ); - - return res; -} -#define __arch_swab16 __arch_swab16 - -#endif /* _XTENSA_SWAB_H */ diff --git a/arch/xtensa/include/asm/termbits.h b/arch/xtensa/include/asm/termbits.h deleted file mode 100644 index 0d6c8715b24..00000000000 --- a/arch/xtensa/include/asm/termbits.h +++ /dev/null @@ -1,220 +0,0 @@ -/* - * include/asm-xtensa/termbits.h - * - * Copied from SH. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_TERMBITS_H -#define _XTENSA_TERMBITS_H - - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ - -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ - -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ - -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ - -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ - -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - -/* tcflow() and TCXONC use these */ - -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ - -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ - -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _XTENSA_TERMBITS_H */ diff --git a/arch/xtensa/include/asm/termios.h b/arch/xtensa/include/asm/termios.h index 4673f42f88a..8b661ca47d5 100644 --- a/arch/xtensa/include/asm/termios.h +++ b/arch/xtensa/include/asm/termios.h @@ -9,50 +9,11 @@ * * Copyright (C) 2001 - 2005 Tensilica Inc. */ - #ifndef _XTENSA_TERMIOS_H #define _XTENSA_TERMIOS_H -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* Modem lines */ +#include -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ /* intr=^C quit=^\ erase=del kill=^U eof=^D vtime=\0 vmin=\1 sxtc=\0 @@ -100,6 +61,4 @@ struct termio { #define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) #define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) -#endif /* __KERNEL__ */ - #endif /* _XTENSA_TERMIOS_H */ diff --git a/arch/xtensa/include/asm/types.h b/arch/xtensa/include/asm/types.h index 6d4db7e8ffa..2b410b8c7f7 100644 --- a/arch/xtensa/include/asm/types.h +++ b/arch/xtensa/include/asm/types.h @@ -7,30 +7,17 @@ * * Copyright (C) 2001 - 2005 Tensilica Inc. */ - #ifndef _XTENSA_TYPES_H #define _XTENSA_TYPES_H -#include - -#ifdef __ASSEMBLY__ -# define __XTENSA_UL(x) (x) -# define __XTENSA_UL_CONST(x) x -#else -# define __XTENSA_UL(x) ((unsigned long)(x)) -# define __XTENSA_UL_CONST(x) x##UL -#endif +#include #ifndef __ASSEMBLY__ - /* * These aren't exported outside the kernel to avoid name space clashes */ -#ifdef __KERNEL__ #define BITS_PER_LONG 32 -#endif /* __KERNEL__ */ #endif - #endif /* _XTENSA_TYPES_H */ diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h index bc7e005faa6..9ef1c31d2c8 100644 --- a/arch/xtensa/include/asm/unistd.h +++ b/arch/xtensa/include/asm/unistd.h @@ -8,705 +8,8 @@ * Copyright (C) 2001 - 2005 Tensilica Inc. */ -#ifndef _XTENSA_UNISTD_H -#define _XTENSA_UNISTD_H +#include -#ifndef __SYSCALL -# define __SYSCALL(nr,func,nargs) -#endif - -#define __NR_spill 0 -__SYSCALL( 0, sys_ni_syscall, 0) -#define __NR_xtensa 1 -__SYSCALL( 1, sys_ni_syscall, 0) -#define __NR_available4 2 -__SYSCALL( 2, sys_ni_syscall, 0) -#define __NR_available5 3 -__SYSCALL( 3, sys_ni_syscall, 0) -#define __NR_available6 4 -__SYSCALL( 4, sys_ni_syscall, 0) -#define __NR_available7 5 -__SYSCALL( 5, sys_ni_syscall, 0) -#define __NR_available8 6 -__SYSCALL( 6, sys_ni_syscall, 0) -#define __NR_available9 7 -__SYSCALL( 7, sys_ni_syscall, 0) - -/* File Operations */ - -#define __NR_open 8 -__SYSCALL( 8, sys_open, 3) -#define __NR_close 9 -__SYSCALL( 9, sys_close, 1) -#define __NR_dup 10 -__SYSCALL( 10, sys_dup, 1) -#define __NR_dup2 11 -__SYSCALL( 11, sys_dup2, 2) -#define __NR_read 12 -__SYSCALL( 12, sys_read, 3) -#define __NR_write 13 -__SYSCALL( 13, sys_write, 3) -#define __NR_select 14 -__SYSCALL( 14, sys_select, 5) -#define __NR_lseek 15 -__SYSCALL( 15, sys_lseek, 3) -#define __NR_poll 16 -__SYSCALL( 16, sys_poll, 3) -#define __NR__llseek 17 -__SYSCALL( 17, sys_llseek, 5) -#define __NR_epoll_wait 18 -__SYSCALL( 18, sys_epoll_wait, 4) -#define __NR_epoll_ctl 19 -__SYSCALL( 19, sys_epoll_ctl, 4) -#define __NR_epoll_create 20 -__SYSCALL( 20, sys_epoll_create, 1) -#define __NR_creat 21 -__SYSCALL( 21, sys_creat, 2) -#define __NR_truncate 22 -__SYSCALL( 22, sys_truncate, 2) -#define __NR_ftruncate 23 -__SYSCALL( 23, sys_ftruncate, 2) -#define __NR_readv 24 -__SYSCALL( 24, sys_readv, 3) -#define __NR_writev 25 -__SYSCALL( 25, sys_writev, 3) -#define __NR_fsync 26 -__SYSCALL( 26, sys_fsync, 1) -#define __NR_fdatasync 27 -__SYSCALL( 27, sys_fdatasync, 1) -#define __NR_truncate64 28 -__SYSCALL( 28, sys_truncate64, 2) -#define __NR_ftruncate64 29 -__SYSCALL( 29, sys_ftruncate64, 2) -#define __NR_pread64 30 -__SYSCALL( 30, sys_pread64, 6) -#define __NR_pwrite64 31 -__SYSCALL( 31, sys_pwrite64, 6) - -#define __NR_link 32 -__SYSCALL( 32, sys_link, 2) -#define __NR_rename 33 -__SYSCALL( 33, sys_rename, 2) -#define __NR_symlink 34 -__SYSCALL( 34, sys_symlink, 2) -#define __NR_readlink 35 -__SYSCALL( 35, sys_readlink, 3) -#define __NR_mknod 36 -__SYSCALL( 36, sys_mknod, 3) -#define __NR_pipe 37 -__SYSCALL( 37, sys_pipe, 1) -#define __NR_unlink 38 -__SYSCALL( 38, sys_unlink, 1) -#define __NR_rmdir 39 -__SYSCALL( 39, sys_rmdir, 1) - -#define __NR_mkdir 40 -__SYSCALL( 40, sys_mkdir, 2) -#define __NR_chdir 41 -__SYSCALL( 41, sys_chdir, 1) -#define __NR_fchdir 42 -__SYSCALL( 42, sys_fchdir, 1) -#define __NR_getcwd 43 -__SYSCALL( 43, sys_getcwd, 2) - -#define __NR_chmod 44 -__SYSCALL( 44, sys_chmod, 2) -#define __NR_chown 45 -__SYSCALL( 45, sys_chown, 3) -#define __NR_stat 46 -__SYSCALL( 46, sys_newstat, 2) -#define __NR_stat64 47 -__SYSCALL( 47, sys_stat64, 2) - -#define __NR_lchown 48 -__SYSCALL( 48, sys_lchown, 3) -#define __NR_lstat 49 -__SYSCALL( 49, sys_newlstat, 2) -#define __NR_lstat64 50 -__SYSCALL( 50, sys_lstat64, 2) -#define __NR_available51 51 -__SYSCALL( 51, sys_ni_syscall, 0) - -#define __NR_fchmod 52 -__SYSCALL( 52, sys_fchmod, 2) -#define __NR_fchown 53 -__SYSCALL( 53, sys_fchown, 3) -#define __NR_fstat 54 -__SYSCALL( 54, sys_newfstat, 2) -#define __NR_fstat64 55 -__SYSCALL( 55, sys_fstat64, 2) - -#define __NR_flock 56 -__SYSCALL( 56, sys_flock, 2) -#define __NR_access 57 -__SYSCALL( 57, sys_access, 2) -#define __NR_umask 58 -__SYSCALL( 58, sys_umask, 1) -#define __NR_getdents 59 -__SYSCALL( 59, sys_getdents, 3) -#define __NR_getdents64 60 -__SYSCALL( 60, sys_getdents64, 3) -#define __NR_fcntl64 61 -__SYSCALL( 61, sys_fcntl64, 3) -#define __NR_available62 62 -__SYSCALL( 62, sys_ni_syscall, 0) -#define __NR_fadvise64_64 63 -__SYSCALL( 63, xtensa_fadvise64_64, 6) -#define __NR_utime 64 /* glibc 2.3.3 ?? */ -__SYSCALL( 64, sys_utime, 2) -#define __NR_utimes 65 -__SYSCALL( 65, sys_utimes, 2) -#define __NR_ioctl 66 -__SYSCALL( 66, sys_ioctl, 3) -#define __NR_fcntl 67 -__SYSCALL( 67, sys_fcntl, 3) - -#define __NR_setxattr 68 -__SYSCALL( 68, sys_setxattr, 5) -#define __NR_getxattr 69 -__SYSCALL( 69, sys_getxattr, 4) -#define __NR_listxattr 70 -__SYSCALL( 70, sys_listxattr, 3) -#define __NR_removexattr 71 -__SYSCALL( 71, sys_removexattr, 2) -#define __NR_lsetxattr 72 -__SYSCALL( 72, sys_lsetxattr, 5) -#define __NR_lgetxattr 73 -__SYSCALL( 73, sys_lgetxattr, 4) -#define __NR_llistxattr 74 -__SYSCALL( 74, sys_llistxattr, 3) -#define __NR_lremovexattr 75 -__SYSCALL( 75, sys_lremovexattr, 2) -#define __NR_fsetxattr 76 -__SYSCALL( 76, sys_fsetxattr, 5) -#define __NR_fgetxattr 77 -__SYSCALL( 77, sys_fgetxattr, 4) -#define __NR_flistxattr 78 -__SYSCALL( 78, sys_flistxattr, 3) -#define __NR_fremovexattr 79 -__SYSCALL( 79, sys_fremovexattr, 2) - -/* File Map / Shared Memory Operations */ - -#define __NR_mmap2 80 -__SYSCALL( 80, sys_mmap_pgoff, 6) -#define __NR_munmap 81 -__SYSCALL( 81, sys_munmap, 2) -#define __NR_mprotect 82 -__SYSCALL( 82, sys_mprotect, 3) -#define __NR_brk 83 -__SYSCALL( 83, sys_brk, 1) -#define __NR_mlock 84 -__SYSCALL( 84, sys_mlock, 2) -#define __NR_munlock 85 -__SYSCALL( 85, sys_munlock, 2) -#define __NR_mlockall 86 -__SYSCALL( 86, sys_mlockall, 1) -#define __NR_munlockall 87 -__SYSCALL( 87, sys_munlockall, 0) -#define __NR_mremap 88 -__SYSCALL( 88, sys_mremap, 4) -#define __NR_msync 89 -__SYSCALL( 89, sys_msync, 3) -#define __NR_mincore 90 -__SYSCALL( 90, sys_mincore, 3) -#define __NR_madvise 91 -__SYSCALL( 91, sys_madvise, 3) -#define __NR_shmget 92 -__SYSCALL( 92, sys_shmget, 4) -#define __NR_shmat 93 -__SYSCALL( 93, xtensa_shmat, 4) -#define __NR_shmctl 94 -__SYSCALL( 94, sys_shmctl, 4) -#define __NR_shmdt 95 -__SYSCALL( 95, sys_shmdt, 4) - -/* Socket Operations */ - -#define __NR_socket 96 -__SYSCALL( 96, sys_socket, 3) -#define __NR_setsockopt 97 -__SYSCALL( 97, sys_setsockopt, 5) -#define __NR_getsockopt 98 -__SYSCALL( 98, sys_getsockopt, 5) -#define __NR_shutdown 99 -__SYSCALL( 99, sys_shutdown, 2) - -#define __NR_bind 100 -__SYSCALL(100, sys_bind, 3) -#define __NR_connect 101 -__SYSCALL(101, sys_connect, 3) -#define __NR_listen 102 -__SYSCALL(102, sys_listen, 2) -#define __NR_accept 103 -__SYSCALL(103, sys_accept, 3) - -#define __NR_getsockname 104 -__SYSCALL(104, sys_getsockname, 3) -#define __NR_getpeername 105 -__SYSCALL(105, sys_getpeername, 3) -#define __NR_sendmsg 106 -__SYSCALL(106, sys_sendmsg, 3) -#define __NR_recvmsg 107 -__SYSCALL(107, sys_recvmsg, 3) -#define __NR_send 108 -__SYSCALL(108, sys_send, 4) -#define __NR_recv 109 -__SYSCALL(109, sys_recv, 4) -#define __NR_sendto 110 -__SYSCALL(110, sys_sendto, 6) -#define __NR_recvfrom 111 -__SYSCALL(111, sys_recvfrom, 6) - -#define __NR_socketpair 112 -__SYSCALL(112, sys_socketpair, 4) -#define __NR_sendfile 113 -__SYSCALL(113, sys_sendfile, 4) -#define __NR_sendfile64 114 -__SYSCALL(114, sys_sendfile64, 4) -#define __NR_available115 115 -__SYSCALL(115, sys_ni_syscall, 0) - -/* Process Operations */ - -#define __NR_clone 116 -__SYSCALL(116, xtensa_clone, 5) -#define __NR_execve 117 -__SYSCALL(117, xtensa_execve, 3) -#define __NR_exit 118 -__SYSCALL(118, sys_exit, 1) -#define __NR_exit_group 119 -__SYSCALL(119, sys_exit_group, 1) -#define __NR_getpid 120 -__SYSCALL(120, sys_getpid, 0) -#define __NR_wait4 121 -__SYSCALL(121, sys_wait4, 4) -#define __NR_waitid 122 -__SYSCALL(122, sys_waitid, 5) -#define __NR_kill 123 -__SYSCALL(123, sys_kill, 2) -#define __NR_tkill 124 -__SYSCALL(124, sys_tkill, 2) -#define __NR_tgkill 125 -__SYSCALL(125, sys_tgkill, 3) -#define __NR_set_tid_address 126 -__SYSCALL(126, sys_set_tid_address, 1) -#define __NR_gettid 127 -__SYSCALL(127, sys_gettid, 0) -#define __NR_setsid 128 -__SYSCALL(128, sys_setsid, 0) -#define __NR_getsid 129 -__SYSCALL(129, sys_getsid, 1) -#define __NR_prctl 130 -__SYSCALL(130, sys_prctl, 5) -#define __NR_personality 131 -__SYSCALL(131, sys_personality, 1) -#define __NR_getpriority 132 -__SYSCALL(132, sys_getpriority, 2) -#define __NR_setpriority 133 -__SYSCALL(133, sys_setpriority, 3) -#define __NR_setitimer 134 -__SYSCALL(134, sys_setitimer, 3) -#define __NR_getitimer 135 -__SYSCALL(135, sys_getitimer, 2) -#define __NR_setuid 136 -__SYSCALL(136, sys_setuid, 1) -#define __NR_getuid 137 -__SYSCALL(137, sys_getuid, 0) -#define __NR_setgid 138 -__SYSCALL(138, sys_setgid, 1) -#define __NR_getgid 139 -__SYSCALL(139, sys_getgid, 0) -#define __NR_geteuid 140 -__SYSCALL(140, sys_geteuid, 0) -#define __NR_getegid 141 -__SYSCALL(141, sys_getegid, 0) -#define __NR_setreuid 142 -__SYSCALL(142, sys_setreuid, 2) -#define __NR_setregid 143 -__SYSCALL(143, sys_setregid, 2) -#define __NR_setresuid 144 -__SYSCALL(144, sys_setresuid, 3) -#define __NR_getresuid 145 -__SYSCALL(145, sys_getresuid, 3) -#define __NR_setresgid 146 -__SYSCALL(146, sys_setresgid, 3) -#define __NR_getresgid 147 -__SYSCALL(147, sys_getresgid, 3) -#define __NR_setpgid 148 -__SYSCALL(148, sys_setpgid, 2) -#define __NR_getpgid 149 -__SYSCALL(149, sys_getpgid, 1) -#define __NR_getppid 150 -__SYSCALL(150, sys_getppid, 0) -#define __NR_getpgrp 151 -__SYSCALL(151, sys_getpgrp, 0) - -#define __NR_reserved152 152 /* set_thread_area */ -__SYSCALL(152, sys_ni_syscall, 0) -#define __NR_reserved153 153 /* get_thread_area */ -__SYSCALL(153, sys_ni_syscall, 0) -#define __NR_times 154 -__SYSCALL(154, sys_times, 1) -#define __NR_acct 155 -__SYSCALL(155, sys_acct, 1) -#define __NR_sched_setaffinity 156 -__SYSCALL(156, sys_sched_setaffinity, 3) -#define __NR_sched_getaffinity 157 -__SYSCALL(157, sys_sched_getaffinity, 3) -#define __NR_capget 158 -__SYSCALL(158, sys_capget, 2) -#define __NR_capset 159 -__SYSCALL(159, sys_capset, 2) -#define __NR_ptrace 160 -__SYSCALL(160, sys_ptrace, 4) -#define __NR_semtimedop 161 -__SYSCALL(161, sys_semtimedop, 5) -#define __NR_semget 162 -__SYSCALL(162, sys_semget, 4) -#define __NR_semop 163 -__SYSCALL(163, sys_semop, 4) -#define __NR_semctl 164 -__SYSCALL(164, sys_semctl, 4) -#define __NR_available165 165 -__SYSCALL(165, sys_ni_syscall, 0) -#define __NR_msgget 166 -__SYSCALL(166, sys_msgget, 4) -#define __NR_msgsnd 167 -__SYSCALL(167, sys_msgsnd, 4) -#define __NR_msgrcv 168 -__SYSCALL(168, sys_msgrcv, 4) -#define __NR_msgctl 169 -__SYSCALL(169, sys_msgctl, 4) -#define __NR_available170 170 -__SYSCALL(170, sys_ni_syscall, 0) -#define __NR_available171 171 -__SYSCALL(171, sys_ni_syscall, 0) - -/* File System */ - -#define __NR_mount 172 -__SYSCALL(172, sys_mount, 5) -#define __NR_swapon 173 -__SYSCALL(173, sys_swapon, 2) -#define __NR_chroot 174 -__SYSCALL(174, sys_chroot, 1) -#define __NR_pivot_root 175 -__SYSCALL(175, sys_pivot_root, 2) -#define __NR_umount 176 -__SYSCALL(176, sys_umount, 2) -#define __NR_swapoff 177 -__SYSCALL(177, sys_swapoff, 1) -#define __NR_sync 178 -__SYSCALL(178, sys_sync, 0) -#define __NR_available179 179 -__SYSCALL(179, sys_ni_syscall, 0) -#define __NR_setfsuid 180 -__SYSCALL(180, sys_setfsuid, 1) -#define __NR_setfsgid 181 -__SYSCALL(181, sys_setfsgid, 1) -#define __NR_sysfs 182 -__SYSCALL(182, sys_sysfs, 3) -#define __NR_ustat 183 -__SYSCALL(183, sys_ustat, 2) -#define __NR_statfs 184 -__SYSCALL(184, sys_statfs, 2) -#define __NR_fstatfs 185 -__SYSCALL(185, sys_fstatfs, 2) -#define __NR_statfs64 186 -__SYSCALL(186, sys_statfs64, 3) -#define __NR_fstatfs64 187 -__SYSCALL(187, sys_fstatfs64, 3) - -/* System */ - -#define __NR_setrlimit 188 -__SYSCALL(188, sys_setrlimit, 2) -#define __NR_getrlimit 189 -__SYSCALL(189, sys_getrlimit, 2) -#define __NR_getrusage 190 -__SYSCALL(190, sys_getrusage, 2) -#define __NR_futex 191 -__SYSCALL(191, sys_futex, 5) -#define __NR_gettimeofday 192 -__SYSCALL(192, sys_gettimeofday, 2) -#define __NR_settimeofday 193 -__SYSCALL(193, sys_settimeofday, 2) -#define __NR_adjtimex 194 -__SYSCALL(194, sys_adjtimex, 1) -#define __NR_nanosleep 195 -__SYSCALL(195, sys_nanosleep, 2) -#define __NR_getgroups 196 -__SYSCALL(196, sys_getgroups, 2) -#define __NR_setgroups 197 -__SYSCALL(197, sys_setgroups, 2) -#define __NR_sethostname 198 -__SYSCALL(198, sys_sethostname, 2) -#define __NR_setdomainname 199 -__SYSCALL(199, sys_setdomainname, 2) -#define __NR_syslog 200 -__SYSCALL(200, sys_syslog, 3) -#define __NR_vhangup 201 -__SYSCALL(201, sys_vhangup, 0) -#define __NR_uselib 202 -__SYSCALL(202, sys_uselib, 1) -#define __NR_reboot 203 -__SYSCALL(203, sys_reboot, 3) -#define __NR_quotactl 204 -__SYSCALL(204, sys_quotactl, 4) -#define __NR_nfsservctl 205 -__SYSCALL(205, sys_ni_syscall, 0) -#define __NR__sysctl 206 -__SYSCALL(206, sys_sysctl, 1) -#define __NR_bdflush 207 -__SYSCALL(207, sys_bdflush, 2) -#define __NR_uname 208 -__SYSCALL(208, sys_newuname, 1) -#define __NR_sysinfo 209 -__SYSCALL(209, sys_sysinfo, 1) -#define __NR_init_module 210 -__SYSCALL(210, sys_init_module, 2) -#define __NR_delete_module 211 -__SYSCALL(211, sys_delete_module, 1) - -#define __NR_sched_setparam 212 -__SYSCALL(212, sys_sched_setparam, 2) -#define __NR_sched_getparam 213 -__SYSCALL(213, sys_sched_getparam, 2) -#define __NR_sched_setscheduler 214 -__SYSCALL(214, sys_sched_setscheduler, 3) -#define __NR_sched_getscheduler 215 -__SYSCALL(215, sys_sched_getscheduler, 1) -#define __NR_sched_get_priority_max 216 -__SYSCALL(216, sys_sched_get_priority_max, 1) -#define __NR_sched_get_priority_min 217 -__SYSCALL(217, sys_sched_get_priority_min, 1) -#define __NR_sched_rr_get_interval 218 -__SYSCALL(218, sys_sched_rr_get_interval, 2) -#define __NR_sched_yield 219 -__SYSCALL(219, sys_sched_yield, 0) -#define __NR_available222 222 -__SYSCALL(222, sys_ni_syscall, 0) - -/* Signal Handling */ - -#define __NR_restart_syscall 223 -__SYSCALL(223, sys_restart_syscall, 0) -#define __NR_sigaltstack 224 -__SYSCALL(224, xtensa_sigaltstack, 2) -#define __NR_rt_sigreturn 225 -__SYSCALL(225, xtensa_rt_sigreturn, 1) -#define __NR_rt_sigaction 226 -__SYSCALL(226, sys_rt_sigaction, 4) -#define __NR_rt_sigprocmask 227 -__SYSCALL(227, sys_rt_sigprocmask, 4) -#define __NR_rt_sigpending 228 -__SYSCALL(228, sys_rt_sigpending, 2) -#define __NR_rt_sigtimedwait 229 -__SYSCALL(229, sys_rt_sigtimedwait, 4) -#define __NR_rt_sigqueueinfo 230 -__SYSCALL(230, sys_rt_sigqueueinfo, 3) -#define __NR_rt_sigsuspend 231 -__SYSCALL(231, sys_rt_sigsuspend, 2) - -/* Message */ - -#define __NR_mq_open 232 -__SYSCALL(232, sys_mq_open, 4) -#define __NR_mq_unlink 233 -__SYSCALL(233, sys_mq_unlink, 1) -#define __NR_mq_timedsend 234 -__SYSCALL(234, sys_mq_timedsend, 5) -#define __NR_mq_timedreceive 235 -__SYSCALL(235, sys_mq_timedreceive, 5) -#define __NR_mq_notify 236 -__SYSCALL(236, sys_mq_notify, 2) -#define __NR_mq_getsetattr 237 -__SYSCALL(237, sys_mq_getsetattr, 3) -#define __NR_available238 238 -__SYSCALL(238, sys_ni_syscall, 0) - -/* IO */ - -#define __NR_io_setup 239 -__SYSCALL(239, sys_io_setup, 2) -#define __NR_io_destroy 240 -__SYSCALL(240, sys_io_destroy, 1) -#define __NR_io_submit 241 -__SYSCALL(241, sys_io_submit, 3) -#define __NR_io_getevents 242 -__SYSCALL(242, sys_io_getevents, 5) -#define __NR_io_cancel 243 -__SYSCALL(243, sys_io_cancel, 3) -#define __NR_clock_settime 244 -__SYSCALL(244, sys_clock_settime, 2) -#define __NR_clock_gettime 245 -__SYSCALL(245, sys_clock_gettime, 2) -#define __NR_clock_getres 246 -__SYSCALL(246, sys_clock_getres, 2) -#define __NR_clock_nanosleep 247 -__SYSCALL(247, sys_clock_nanosleep, 4) - -/* Timer */ - -#define __NR_timer_create 248 -__SYSCALL(248, sys_timer_create, 3) -#define __NR_timer_delete 249 -__SYSCALL(249, sys_timer_delete, 1) -#define __NR_timer_settime 250 -__SYSCALL(250, sys_timer_settime, 4) -#define __NR_timer_gettime 251 -__SYSCALL(251, sys_timer_gettime, 2) -#define __NR_timer_getoverrun 252 -__SYSCALL(252, sys_timer_getoverrun, 1) - -/* System */ - -#define __NR_reserved244 253 -__SYSCALL(253, sys_ni_syscall, 0) -#define __NR_lookup_dcookie 254 -__SYSCALL(254, sys_lookup_dcookie, 4) -#define __NR_available255 255 -__SYSCALL(255, sys_ni_syscall, 0) -#define __NR_add_key 256 -__SYSCALL(256, sys_add_key, 5) -#define __NR_request_key 257 -__SYSCALL(257, sys_request_key, 5) -#define __NR_keyctl 258 -__SYSCALL(258, sys_keyctl, 5) -#define __NR_available259 259 -__SYSCALL(259, sys_ni_syscall, 0) - - -#define __NR_readahead 260 -__SYSCALL(260, sys_readahead, 5) -#define __NR_remap_file_pages 261 -__SYSCALL(261, sys_remap_file_pages, 5) -#define __NR_migrate_pages 262 -__SYSCALL(262, sys_migrate_pages, 0) -#define __NR_mbind 263 -__SYSCALL(263, sys_mbind, 6) -#define __NR_get_mempolicy 264 -__SYSCALL(264, sys_get_mempolicy, 5) -#define __NR_set_mempolicy 265 -__SYSCALL(265, sys_set_mempolicy, 3) -#define __NR_unshare 266 -__SYSCALL(266, sys_unshare, 1) -#define __NR_move_pages 267 -__SYSCALL(267, sys_move_pages, 0) -#define __NR_splice 268 -__SYSCALL(268, sys_splice, 0) -#define __NR_tee 269 -__SYSCALL(269, sys_tee, 0) -#define __NR_vmsplice 270 -__SYSCALL(270, sys_vmsplice, 0) -#define __NR_available271 271 -__SYSCALL(271, sys_ni_syscall, 0) - -#define __NR_pselect6 272 -__SYSCALL(272, sys_pselect6, 0) -#define __NR_ppoll 273 -__SYSCALL(273, sys_ppoll, 0) -#define __NR_epoll_pwait 274 -__SYSCALL(274, sys_epoll_pwait, 0) -#define __NR_available275 275 -__SYSCALL(275, sys_ni_syscall, 0) - -#define __NR_inotify_init 276 -__SYSCALL(276, sys_inotify_init, 0) -#define __NR_inotify_add_watch 277 -__SYSCALL(277, sys_inotify_add_watch, 3) -#define __NR_inotify_rm_watch 278 -__SYSCALL(278, sys_inotify_rm_watch, 2) -#define __NR_available279 279 -__SYSCALL(279, sys_ni_syscall, 0) - -#define __NR_getcpu 280 -__SYSCALL(280, sys_getcpu, 0) -#define __NR_kexec_load 281 -__SYSCALL(281, sys_ni_syscall, 0) - -#define __NR_ioprio_set 282 -__SYSCALL(282, sys_ioprio_set, 2) -#define __NR_ioprio_get 283 -__SYSCALL(283, sys_ioprio_get, 3) - -#define __NR_set_robust_list 284 -__SYSCALL(284, sys_set_robust_list, 3) -#define __NR_get_robust_list 285 -__SYSCALL(285, sys_get_robust_list, 3) -#define __NR_reserved286 286 /* sync_file_rangeX */ -__SYSCALL(286, sys_ni_syscall, 3) -#define __NR_available287 287 -__SYSCALL(287, sys_faccessat, 0) - -/* Relative File Operations */ - -#define __NR_openat 288 -__SYSCALL(288, sys_openat, 4) -#define __NR_mkdirat 289 -__SYSCALL(289, sys_mkdirat, 3) -#define __NR_mknodat 290 -__SYSCALL(290, sys_mknodat, 4) -#define __NR_unlinkat 291 -__SYSCALL(291, sys_unlinkat, 3) -#define __NR_renameat 292 -__SYSCALL(292, sys_renameat, 4) -#define __NR_linkat 293 -__SYSCALL(293, sys_linkat, 5) -#define __NR_symlinkat 294 -__SYSCALL(294, sys_symlinkat, 3) -#define __NR_readlinkat 295 -__SYSCALL(295, sys_readlinkat, 4) -#define __NR_utimensat 296 -__SYSCALL(296, sys_utimensat, 0) -#define __NR_fchownat 297 -__SYSCALL(297, sys_fchownat, 5) -#define __NR_futimesat 298 -__SYSCALL(298, sys_futimesat, 4) -#define __NR_fstatat64 299 -__SYSCALL(299, sys_fstatat64, 0) -#define __NR_fchmodat 300 -__SYSCALL(300, sys_fchmodat, 4) -#define __NR_faccessat 301 -__SYSCALL(301, sys_faccessat, 4) -#define __NR_available302 302 -__SYSCALL(302, sys_ni_syscall, 0) -#define __NR_available303 303 -__SYSCALL(303, sys_ni_syscall, 0) - -#define __NR_signalfd 304 -__SYSCALL(304, sys_signalfd, 3) -/* 305 was __NR_timerfd */ -__SYSCALL(305, sys_ni_syscall, 0) -#define __NR_eventfd 306 -__SYSCALL(306, sys_eventfd, 1) -#define __NR_recvmmsg 307 -__SYSCALL(307, sys_recvmmsg, 5) -#define __NR_setns 308 -__SYSCALL(308, sys_setns, 2) - -#define __NR_syscall_count 309 - -/* - * sysxtensa syscall handler - * - * int sysxtensa (SYS_XTENSA_ATOMIC_SET, ptr, val, unused); - * int sysxtensa (SYS_XTENSA_ATOMIC_ADD, ptr, val, unused); - * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val, unused); - * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval); - * a2 a6 a3 a4 a5 - */ - -#define SYS_XTENSA_RESERVED 0 /* don't use this */ -#define SYS_XTENSA_ATOMIC_SET 1 /* set variable */ -#define SYS_XTENSA_ATOMIC_EXG_ADD 2 /* exchange memory and add */ -#define SYS_XTENSA_ATOMIC_ADD 3 /* add to memory */ -#define SYS_XTENSA_ATOMIC_CMP_SWP 4 /* compare and swap */ - -#define SYS_XTENSA_COUNT 5 /* count */ - -#ifdef __KERNEL__ /* * "Conditional" syscalls @@ -734,6 +37,3 @@ __SYSCALL(308, sys_setns, 2) #define __IGNORE_mmap /* use mmap2 */ #define __IGNORE_vfork /* use clone */ #define __IGNORE_fadvise64 /* use fadvise64_64 */ - -#endif /* __KERNEL__ */ -#endif /* _XTENSA_UNISTD_H */ diff --git a/arch/xtensa/include/uapi/asm/Kbuild b/arch/xtensa/include/uapi/asm/Kbuild index baebb3da1d4..040178cdb3e 100644 --- a/arch/xtensa/include/uapi/asm/Kbuild +++ b/arch/xtensa/include/uapi/asm/Kbuild @@ -1,3 +1,34 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +header-y += auxvec.h +header-y += bitsperlong.h +header-y += byteorder.h +header-y += errno.h +header-y += fcntl.h +header-y += ioctl.h +header-y += ioctls.h +header-y += ipcbuf.h +header-y += kvm_para.h +header-y += mman.h +header-y += msgbuf.h +header-y += param.h +header-y += poll.h +header-y += posix_types.h +header-y += ptrace.h +header-y += resource.h +header-y += sembuf.h +header-y += setup.h +header-y += shmbuf.h +header-y += sigcontext.h +header-y += siginfo.h +header-y += signal.h +header-y += socket.h +header-y += sockios.h +header-y += stat.h +header-y += statfs.h +header-y += swab.h +header-y += termbits.h +header-y += termios.h +header-y += types.h +header-y += unistd.h diff --git a/arch/xtensa/include/uapi/asm/auxvec.h b/arch/xtensa/include/uapi/asm/auxvec.h new file mode 100644 index 00000000000..257dec75c5a --- /dev/null +++ b/arch/xtensa/include/uapi/asm/auxvec.h @@ -0,0 +1,4 @@ +#ifndef __XTENSA_AUXVEC_H +#define __XTENSA_AUXVEC_H + +#endif diff --git a/arch/xtensa/include/uapi/asm/bitsperlong.h b/arch/xtensa/include/uapi/asm/bitsperlong.h new file mode 100644 index 00000000000..6dc0bb0c13b --- /dev/null +++ b/arch/xtensa/include/uapi/asm/bitsperlong.h @@ -0,0 +1 @@ +#include diff --git a/arch/xtensa/include/uapi/asm/byteorder.h b/arch/xtensa/include/uapi/asm/byteorder.h new file mode 100644 index 00000000000..54eb6315349 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/byteorder.h @@ -0,0 +1,12 @@ +#ifndef _XTENSA_BYTEORDER_H +#define _XTENSA_BYTEORDER_H + +#ifdef __XTENSA_EL__ +#include +#elif defined(__XTENSA_EB__) +#include +#else +# error processor byte order undefined! +#endif + +#endif /* _XTENSA_BYTEORDER_H */ diff --git a/arch/xtensa/include/uapi/asm/errno.h b/arch/xtensa/include/uapi/asm/errno.h new file mode 100644 index 00000000000..a0f3b96b79b --- /dev/null +++ b/arch/xtensa/include/uapi/asm/errno.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/errno.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2002 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_ERRNO_H +#define _XTENSA_ERRNO_H + +#include + +#endif /* _XTENSA_ERRNO_H */ diff --git a/arch/xtensa/include/uapi/asm/fcntl.h b/arch/xtensa/include/uapi/asm/fcntl.h new file mode 100644 index 00000000000..46ab12db573 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/fcntl.h @@ -0,0 +1 @@ +#include diff --git a/arch/xtensa/include/uapi/asm/ioctl.h b/arch/xtensa/include/uapi/asm/ioctl.h new file mode 100644 index 00000000000..b279fe06dfe --- /dev/null +++ b/arch/xtensa/include/uapi/asm/ioctl.h @@ -0,0 +1 @@ +#include diff --git a/arch/xtensa/include/uapi/asm/ioctls.h b/arch/xtensa/include/uapi/asm/ioctls.h new file mode 100644 index 00000000000..2aa4cd9f0ce --- /dev/null +++ b/arch/xtensa/include/uapi/asm/ioctls.h @@ -0,0 +1,120 @@ +/* + * include/asm-xtensa/ioctls.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 - 2005 Tensilica Inc. + * + * Derived from "include/asm-i386/ioctls.h" + */ + +#ifndef _XTENSA_IOCTLS_H +#define _XTENSA_IOCTLS_H + +#include + +#define FIOCLEX _IO('f', 1) +#define FIONCLEX _IO('f', 2) +#define FIOASYNC _IOW('f', 125, int) +#define FIONBIO _IOW('f', 126, int) +#define FIONREAD _IOR('f', 127, int) +#define TIOCINQ FIONREAD +#define FIOQSIZE _IOR('f', 128, loff_t) + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 + +#define TCGETA _IOR('t', 23, struct termio) +#define TCSETA _IOW('t', 24, struct termio) +#define TCSETAW _IOW('t', 25, struct termio) +#define TCSETAF _IOW('t', 28, struct termio) + +#define TCSBRK _IO('t', 29) +#define TCXONC _IO('t', 30) +#define TCFLSH _IO('t', 31) + +#define TIOCSWINSZ _IOW('t', 103, struct winsize) +#define TIOCGWINSZ _IOR('t', 104, struct winsize) +#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ +#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ +#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ + +#define TIOCSPGRP _IOW('t', 118, int) +#define TIOCGPGRP _IOR('t', 119, int) + +#define TIOCEXCL _IO('T', 12) +#define TIOCNXCL _IO('T', 13) +#define TIOCSCTTY _IO('T', 14) + +#define TIOCSTI _IOW('T', 18, char) +#define TIOCMGET _IOR('T', 21, unsigned int) +#define TIOCMBIS _IOW('T', 22, unsigned int) +#define TIOCMBIC _IOW('T', 23, unsigned int) +#define TIOCMSET _IOW('T', 24, unsigned int) +# define TIOCM_LE 0x001 +# define TIOCM_DTR 0x002 +# define TIOCM_RTS 0x004 +# define TIOCM_ST 0x008 +# define TIOCM_SR 0x010 +# define TIOCM_CTS 0x020 +# define TIOCM_CAR 0x040 +# define TIOCM_RNG 0x080 +# define TIOCM_DSR 0x100 +# define TIOCM_CD TIOCM_CAR +# define TIOCM_RI TIOCM_RNG + +#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) +#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) +#define TIOCLINUX _IOW('T', 28, char) +#define TIOCCONS _IO('T', 29) +#define TIOCGSERIAL 0x803C541E /*_IOR('T', 30, struct serial_struct)*/ +#define TIOCSSERIAL 0x403C541F /*_IOW('T', 31, struct serial_struct)*/ +#define TIOCPKT _IOW('T', 32, int) +# define TIOCPKT_DATA 0 +# define TIOCPKT_FLUSHREAD 1 +# define TIOCPKT_FLUSHWRITE 2 +# define TIOCPKT_STOP 4 +# define TIOCPKT_START 8 +# define TIOCPKT_NOSTOP 16 +# define TIOCPKT_DOSTOP 32 +# define TIOCPKT_IOCTL 64 + + +#define TIOCNOTTY _IO('T', 34) +#define TIOCSETD _IOW('T', 35, int) +#define TIOCGETD _IOR('T', 36, int) +#define TCSBRKP _IOW('T', 37, int) /* Needed for POSIX tcsendbreak()*/ +#define TIOCTTYGSTRUCT _IOR('T', 38, struct tty_struct) /* For debugging only*/ +#define TIOCSBRK _IO('T', 39) /* BSD compatibility */ +#define TIOCCBRK _IO('T', 40) /* BSD compatibility */ +#define TIOCGSID _IOR('T', 41, pid_t) /* Return the session ID of FD*/ +#define TCGETS2 _IOR('T', 42, struct termios2) +#define TCSETS2 _IOW('T', 43, struct termios2) +#define TCSETSW2 _IOW('T', 44, struct termios2) +#define TCSETSF2 _IOW('T', 45, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCGDEV _IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP _IO('T', 0x37) + +#define TIOCSERCONFIG _IO('T', 83) +#define TIOCSERGWILD _IOR('T', 84, int) +#define TIOCSERSWILD _IOW('T', 85, int) +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* Get line status reg. */ + /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ +# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ +#define TIOCSERGETMULTI _IOR('T', 90, struct serial_multiport_struct) /* Get multiport config */ +#define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* Set multiport config */ + +#define TIOCMIWAIT _IO('T', 92) /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ + +#endif /* _XTENSA_IOCTLS_H */ diff --git a/arch/xtensa/include/uapi/asm/ipcbuf.h b/arch/xtensa/include/uapi/asm/ipcbuf.h new file mode 100644 index 00000000000..c33aa6a4214 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/ipcbuf.h @@ -0,0 +1,37 @@ +/* + * include/asm-xtensa/ipcbuf.h + * + * The ipc64_perm structure for the Xtensa architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_IPCBUF_H +#define _XTENSA_IPCBUF_H + +/* + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned long seq; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* _XTENSA_IPCBUF_H */ diff --git a/arch/xtensa/include/uapi/asm/kvm_para.h b/arch/xtensa/include/uapi/asm/kvm_para.h new file mode 100644 index 00000000000..14fab8f0b95 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/kvm_para.h @@ -0,0 +1 @@ +#include diff --git a/arch/xtensa/include/uapi/asm/mman.h b/arch/xtensa/include/uapi/asm/mman.h new file mode 100644 index 00000000000..25bc6c1309c --- /dev/null +++ b/arch/xtensa/include/uapi/asm/mman.h @@ -0,0 +1,96 @@ +/* + * include/asm-xtensa/mman.h + * + * Xtensa Processor memory-manager definitions + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 by Ralf Baechle + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_MMAN_H +#define _XTENSA_MMAN_H + +/* + * Protections are chosen from these bits, OR'd together. The + * implementation does not necessarily support PROT_EXEC or PROT_WRITE + * without PROT_READ. The only guarantees are that no writing will be + * allowed without PROT_WRITE and no access will be allowed for PROT_NONE. + */ + +#define PROT_NONE 0x0 /* page can not be accessed */ +#define PROT_READ 0x1 /* page can be read */ +#define PROT_WRITE 0x2 /* page can be written */ +#define PROT_EXEC 0x4 /* page can be executed */ + +#define PROT_SEM 0x10 /* page may be used for atomic ops */ +#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ +#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end fo growsup vma */ + +/* + * Flags for mmap + */ +#define MAP_SHARED 0x001 /* Share changes */ +#define MAP_PRIVATE 0x002 /* Changes are private */ +#define MAP_TYPE 0x00f /* Mask for type of mapping */ +#define MAP_FIXED 0x010 /* Interpret addr exactly */ + +/* not used by linux, but here to make sure we don't clash with ABI defines */ +#define MAP_RENAME 0x020 /* Assign page to file */ +#define MAP_AUTOGROW 0x040 /* File may grow by writing */ +#define MAP_LOCAL 0x080 /* Copy on fork/sproc */ +#define MAP_AUTORSRV 0x100 /* Logical swap reserved on demand */ + +/* These are linux-specific */ +#define MAP_NORESERVE 0x0400 /* don't check for reservations */ +#define MAP_ANONYMOUS 0x0800 /* don't use a file */ +#define MAP_GROWSDOWN 0x1000 /* stack-like segment */ +#define MAP_DENYWRITE 0x2000 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x4000 /* mark it as an executable */ +#define MAP_LOCKED 0x8000 /* pages are locked */ +#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x20000 /* do not block on IO */ +#define MAP_STACK 0x40000 /* give out an address that is best suited for process/thread stacks */ +#define MAP_HUGETLB 0x80000 /* create a huge page mapping */ + +/* + * Flags for msync + */ +#define MS_ASYNC 0x0001 /* sync memory asynchronously */ +#define MS_INVALIDATE 0x0002 /* invalidate mappings & caches */ +#define MS_SYNC 0x0004 /* synchronous memory sync */ + +/* + * Flags for mlockall + */ +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#define MADV_NORMAL 0 /* no further special treatment */ +#define MADV_RANDOM 1 /* expect random page references */ +#define MADV_SEQUENTIAL 2 /* expect sequential page references */ +#define MADV_WILLNEED 3 /* will need these pages */ +#define MADV_DONTNEED 4 /* don't need these pages */ + +/* common parameters: try to keep these consistent across architectures */ +#define MADV_REMOVE 9 /* remove these pages & resources */ +#define MADV_DONTFORK 10 /* don't inherit across fork */ +#define MADV_DOFORK 11 /* do inherit across fork */ + +#define MADV_MERGEABLE 12 /* KSM may merge identical pages */ +#define MADV_UNMERGEABLE 13 /* KSM may not merge identical pages */ + +#define MADV_HUGEPAGE 14 /* Worth backing with hugepages */ +#define MADV_NOHUGEPAGE 15 /* Not worth backing with hugepages */ + +#define MADV_DONTDUMP 16 /* Explicity exclude from the core dump, + overrides the coredump filter bits */ +#define MADV_DODUMP 17 /* Clear the MADV_NODUMP flag */ + +/* compatibility flags */ +#define MAP_FILE 0 + +#endif /* _XTENSA_MMAN_H */ diff --git a/arch/xtensa/include/uapi/asm/msgbuf.h b/arch/xtensa/include/uapi/asm/msgbuf.h new file mode 100644 index 00000000000..693c9675528 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/msgbuf.h @@ -0,0 +1,48 @@ +/* + * include/asm-xtensa/msgbuf.h + * + * The msqid64_ds structure for the Xtensa architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + */ + +#ifndef _XTENSA_MSGBUF_H +#define _XTENSA_MSGBUF_H + +struct msqid64_ds { + struct ipc64_perm msg_perm; +#ifdef __XTENSA_EB__ + unsigned int __unused1; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned int __unused2; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned int __unused3; + __kernel_time_t msg_ctime; /* last change time */ +#elif defined(__XTENSA_EL__) + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned int __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned int __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned int __unused3; +#else +# error processor byte order undefined! +#endif + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _XTENSA_MSGBUF_H */ diff --git a/arch/xtensa/include/uapi/asm/param.h b/arch/xtensa/include/uapi/asm/param.h new file mode 100644 index 00000000000..87bc2eae630 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/param.h @@ -0,0 +1,30 @@ +/* + * include/asm-xtensa/param.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _UAPI_XTENSA_PARAM_H +#define _UAPI_XTENSA_PARAM_H + +#ifndef __KERNEL__ +# define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NGROUPS +#define NGROUPS 32 +#endif + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* _UAPI_XTENSA_PARAM_H */ diff --git a/arch/xtensa/include/uapi/asm/poll.h b/arch/xtensa/include/uapi/asm/poll.h new file mode 100644 index 00000000000..9d2d5993f06 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/poll.h @@ -0,0 +1,20 @@ +/* + * include/asm-xtensa/poll.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_POLL_H +#define _XTENSA_POLL_H + +#define POLLWRNORM POLLOUT +#define POLLWRBAND 0x0100 +#define POLLREMOVE 0x0800 + +#include + +#endif /* _XTENSA_POLL_H */ diff --git a/arch/xtensa/include/uapi/asm/posix_types.h b/arch/xtensa/include/uapi/asm/posix_types.h new file mode 100644 index 00000000000..6e96be0d02d --- /dev/null +++ b/arch/xtensa/include/uapi/asm/posix_types.h @@ -0,0 +1,39 @@ +/* + * include/asm-xtensa/posix_types.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Largely copied from include/asm-ppc/posix_types.h + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_POSIX_TYPES_H +#define _XTENSA_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned short __kernel_ipc_pid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t + +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef long __kernel_ptrdiff_t; +#define __kernel_size_t __kernel_size_t + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +#define __kernel_old_uid_t __kernel_old_uid_t + +typedef unsigned short __kernel_old_dev_t; +#define __kernel_old_dev_t __kernel_old_dev_t + +#include + +#endif /* _XTENSA_POSIX_TYPES_H */ diff --git a/arch/xtensa/include/uapi/asm/ptrace.h b/arch/xtensa/include/uapi/asm/ptrace.h new file mode 100644 index 00000000000..ee17aa842fd --- /dev/null +++ b/arch/xtensa/include/uapi/asm/ptrace.h @@ -0,0 +1,77 @@ +/* + * include/asm-xtensa/ptrace.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _UAPI_XTENSA_PTRACE_H +#define _UAPI_XTENSA_PTRACE_H + +/* + * Kernel stack + * + * +-----------------------+ -------- STACK_SIZE + * | register file | | + * +-----------------------+ | + * | struct pt_regs | | + * +-----------------------+ | ------ PT_REGS_OFFSET + * double : 16 bytes spill area : | ^ + * excetion :- - - - - - - - - - - -: | | + * frame : struct pt_regs : | | + * :- - - - - - - - - - - -: | | + * | | | | + * | memory stack | | | + * | | | | + * ~ ~ ~ ~ + * ~ ~ ~ ~ + * | | | | + * | | | | + * +-----------------------+ | | --- STACK_BIAS + * | struct task_struct | | | ^ + * current --> +-----------------------+ | | | + * | struct thread_info | | | | + * +-----------------------+ -------- + */ + +#define KERNEL_STACK_SIZE (2 * PAGE_SIZE) + +/* Offsets for exception_handlers[] (3 x 64-entries x 4-byte tables). */ + +#define EXC_TABLE_KSTK 0x004 /* Kernel Stack */ +#define EXC_TABLE_DOUBLE_SAVE 0x008 /* Double exception save area for a0 */ +#define EXC_TABLE_FIXUP 0x00c /* Fixup handler */ +#define EXC_TABLE_PARAM 0x010 /* For passing a parameter to fixup */ +#define EXC_TABLE_SYSCALL_SAVE 0x014 /* For fast syscall handler */ +#define EXC_TABLE_FAST_USER 0x100 /* Fast user exception handler */ +#define EXC_TABLE_FAST_KERNEL 0x200 /* Fast kernel exception handler */ +#define EXC_TABLE_DEFAULT 0x300 /* Default C-Handler */ +#define EXC_TABLE_SIZE 0x400 + +/* Registers used by strace */ + +#define REG_A_BASE 0x0000 +#define REG_AR_BASE 0x0100 +#define REG_PC 0x0020 +#define REG_PS 0x02e6 +#define REG_WB 0x0248 +#define REG_WS 0x0249 +#define REG_LBEG 0x0200 +#define REG_LEND 0x0201 +#define REG_LCOUNT 0x0202 +#define REG_SAR 0x0203 + +#define SYSCALL_NR 0x00ff + +/* Other PTRACE_ values defined in using values 0-9,16,17,24 */ + +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETXTREGS 18 +#define PTRACE_SETXTREGS 19 + + +#endif /* _UAPI_XTENSA_PTRACE_H */ diff --git a/arch/xtensa/include/uapi/asm/resource.h b/arch/xtensa/include/uapi/asm/resource.h new file mode 100644 index 00000000000..17b5ab31177 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/resource.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/resource.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_RESOURCE_H +#define _XTENSA_RESOURCE_H + +#include + +#endif /* _XTENSA_RESOURCE_H */ diff --git a/arch/xtensa/include/uapi/asm/sembuf.h b/arch/xtensa/include/uapi/asm/sembuf.h new file mode 100644 index 00000000000..c15870493b3 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/sembuf.h @@ -0,0 +1,44 @@ +/* + * include/asm-xtensa/sembuf.h + * + * The semid64_ds structure for Xtensa architecture. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + * + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + * + */ + +#ifndef _XTENSA_SEMBUF_H +#define _XTENSA_SEMBUF_H + +#include + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ +#ifdef __XTENSA_EL__ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; +#else + unsigned long __unused1; + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused2; + __kernel_time_t sem_ctime; /* last change time */ +#endif + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* __ASM_XTENSA_SEMBUF_H */ diff --git a/arch/xtensa/include/uapi/asm/setup.h b/arch/xtensa/include/uapi/asm/setup.h new file mode 100644 index 00000000000..9fa8ad97936 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/setup.h @@ -0,0 +1,18 @@ +/* + * include/asm-xtensa/setup.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SETUP_H +#define _XTENSA_SETUP_H + +#define COMMAND_LINE_SIZE 256 + +extern void set_except_vector(int n, void *addr); + +#endif diff --git a/arch/xtensa/include/uapi/asm/shmbuf.h b/arch/xtensa/include/uapi/asm/shmbuf.h new file mode 100644 index 00000000000..ad4b0121782 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/shmbuf.h @@ -0,0 +1,71 @@ +/* + * include/asm-xtensa/shmbuf.h + * + * The shmid64_ds structure for Xtensa architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SHMBUF_H +#define _XTENSA_SHMBUF_H + +#if defined (__XTENSA_EL__) +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; +#elif defined (__XTENSA_EB__) +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; +#else +# error endian order not defined +#endif + + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _XTENSA_SHMBUF_H */ diff --git a/arch/xtensa/include/uapi/asm/sigcontext.h b/arch/xtensa/include/uapi/asm/sigcontext.h new file mode 100644 index 00000000000..03383af8c3b --- /dev/null +++ b/arch/xtensa/include/uapi/asm/sigcontext.h @@ -0,0 +1,28 @@ +/* + * include/asm-xtensa/sigcontext.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2007 Tensilica Inc. + */ + +#ifndef _XTENSA_SIGCONTEXT_H +#define _XTENSA_SIGCONTEXT_H + + +struct sigcontext { + unsigned long sc_pc; + unsigned long sc_ps; + unsigned long sc_lbeg; + unsigned long sc_lend; + unsigned long sc_lcount; + unsigned long sc_sar; + unsigned long sc_acclo; + unsigned long sc_acchi; + unsigned long sc_a[16]; + void *sc_xtregs; +}; + +#endif /* _XTENSA_SIGCONTEXT_H */ diff --git a/arch/xtensa/include/uapi/asm/siginfo.h b/arch/xtensa/include/uapi/asm/siginfo.h new file mode 100644 index 00000000000..6916248295d --- /dev/null +++ b/arch/xtensa/include/uapi/asm/siginfo.h @@ -0,0 +1,16 @@ +/* + * include/asm-xtensa/siginfo.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SIGINFO_H +#define _XTENSA_SIGINFO_H + +#include + +#endif /* _XTENSA_SIGINFO_H */ diff --git a/arch/xtensa/include/uapi/asm/signal.h b/arch/xtensa/include/uapi/asm/signal.h new file mode 100644 index 00000000000..b88ce96f2af --- /dev/null +++ b/arch/xtensa/include/uapi/asm/signal.h @@ -0,0 +1,148 @@ +/* + * include/asm-xtensa/signal.h + * + * Swiped from SH. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _UAPI_XTENSA_SIGNAL_H +#define _UAPI_XTENSA_SIGNAL_H + + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +#ifndef __ASSEMBLY__ + +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; +typedef unsigned long old_sigset_t; /* at least 32 bits */ +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#endif + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* #define SIGLOST 29 */ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX (_NSIG-1) + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#ifndef __ASSEMBLY__ + +#define SIG_BLOCK 0 /* for blocking signals */ +#define SIG_UNBLOCK 1 /* for unblocking signals */ +#define SIG_SETMASK 2 /* for setting the signal mask */ + +/* Type of a signal handler. */ +typedef void (*__sighandler_t)(int); + +#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ +#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ +#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ + +#ifndef __KERNEL__ + +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#endif /* __ASSEMBLY__ */ +#endif /* _UAPI_XTENSA_SIGNAL_H */ diff --git a/arch/xtensa/include/uapi/asm/socket.h b/arch/xtensa/include/uapi/asm/socket.h new file mode 100644 index 00000000000..e36c6818492 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/socket.h @@ -0,0 +1,83 @@ +/* + * include/asm-xtensa/socket.h + * + * Copied from i386. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef _XTENSA_SOCKET_H +#define _XTENSA_SOCKET_H + +#include + +/* For setsockoptions(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ + +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ + +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#define SO_TIMESTAMPING 37 +#define SCM_TIMESTAMPING SO_TIMESTAMPING + +#define SO_PROTOCOL 38 +#define SO_DOMAIN 39 + +#define SO_RXQ_OVFL 40 + +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS +#define SO_PEEK_OFF 42 + +/* Instruct lower device to use last 4-bytes of skb data as FCS */ +#define SO_NOFCS 43 + +#endif /* _XTENSA_SOCKET_H */ diff --git a/arch/xtensa/include/uapi/asm/sockios.h b/arch/xtensa/include/uapi/asm/sockios.h new file mode 100644 index 00000000000..efe0af379f0 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/sockios.h @@ -0,0 +1,31 @@ +/* + * include/asm-xtensa/sockios.h + * + * Socket-level I/O control calls. Copied from MIPS. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1995 by Ralf Baechle + * Copyright (C) 2001 Tensilica Inc. + */ + +#ifndef _XTENSA_SOCKIOS_H +#define _XTENSA_SOCKIOS_H + +#include + +/* Socket-level I/O control calls. */ + +#define FIOGETOWN _IOR('f', 123, int) +#define FIOSETOWN _IOW('f', 124, int) + +#define SIOCATMARK _IOR('s', 7, int) +#define SIOCSPGRP _IOW('s', 8, pid_t) +#define SIOCGPGRP _IOR('s', 9, pid_t) + +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif /* _XTENSA_SOCKIOS_H */ diff --git a/arch/xtensa/include/uapi/asm/stat.h b/arch/xtensa/include/uapi/asm/stat.h new file mode 100644 index 00000000000..c4992038cee --- /dev/null +++ b/arch/xtensa/include/uapi/asm/stat.h @@ -0,0 +1,59 @@ +/* + * include/asm-xtensa/stat.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2007 Tensilica Inc. + */ + +#ifndef _XTENSA_STAT_H +#define _XTENSA_STAT_H + +#define STAT_HAVE_NSEC 1 + +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned int st_mode; + unsigned int st_nlink; + unsigned int st_uid; + unsigned int st_gid; + unsigned long st_rdev; + long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +struct stat64 { + unsigned long long st_dev; /* Device */ + unsigned long long st_ino; /* File serial number */ + unsigned int st_mode; /* File mode. */ + unsigned int st_nlink; /* Link count. */ + unsigned int st_uid; /* User ID of the file's owner. */ + unsigned int st_gid; /* Group ID of the file's group. */ + unsigned long long st_rdev; /* Device number, if device. */ + long long st_size; /* Size of file, in bytes. */ + unsigned long st_blksize; /* Optimal block size for I/O. */ + unsigned long __unused2; + unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long st_atime; /* Time of last access. */ + unsigned long st_atime_nsec; + unsigned long st_mtime; /* Time of last modification. */ + unsigned long st_mtime_nsec; + unsigned long st_ctime; /* Time of last status change. */ + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _XTENSA_STAT_H */ diff --git a/arch/xtensa/include/uapi/asm/statfs.h b/arch/xtensa/include/uapi/asm/statfs.h new file mode 100644 index 00000000000..9c3d1a21313 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/statfs.h @@ -0,0 +1,17 @@ +/* + * include/asm-xtensa/statfs.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_STATFS_H +#define _XTENSA_STATFS_H + +#include + +#endif /* _XTENSA_STATFS_H */ + diff --git a/arch/xtensa/include/uapi/asm/swab.h b/arch/xtensa/include/uapi/asm/swab.h new file mode 100644 index 00000000000..226a3916231 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/swab.h @@ -0,0 +1,70 @@ +/* + * include/asm-xtensa/swab.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_SWAB_H +#define _XTENSA_SWAB_H + +#include +#include + +#define __SWAB_64_THRU_32__ + +static inline __attribute_const__ __u32 __arch_swab32(__u32 x) +{ + __u32 res; + /* instruction sequence from Xtensa ISA release 2/2000 */ + __asm__("ssai 8 \n\t" + "srli %0, %1, 16 \n\t" + "src %0, %0, %1 \n\t" + "src %0, %0, %0 \n\t" + "src %0, %1, %0 \n" + : "=&a" (res) + : "a" (x) + ); + return res; +} +#define __arch_swab32 __arch_swab32 + +static inline __attribute_const__ __u16 __arch_swab16(__u16 x) +{ + /* Given that 'short' values are signed (i.e., can be negative), + * we cannot assume that the upper 16-bits of the register are + * zero. We are careful to mask values after shifting. + */ + + /* There exists an anomaly between xt-gcc and xt-xcc. xt-gcc + * inserts an extui instruction after putting this function inline + * to ensure that it uses only the least-significant 16 bits of + * the result. xt-xcc doesn't use an extui, but assumes the + * __asm__ macro follows convention that the upper 16 bits of an + * 'unsigned short' result are still zero. This macro doesn't + * follow convention; indeed, it leaves garbage in the upport 16 + * bits of the register. + + * Declaring the temporary variables 'res' and 'tmp' to be 32-bit + * types while the return type of the function is a 16-bit type + * forces both compilers to insert exactly one extui instruction + * (or equivalent) to mask off the upper 16 bits. */ + + __u32 res; + __u32 tmp; + + __asm__("extui %1, %2, 8, 8\n\t" + "slli %0, %2, 8 \n\t" + "or %0, %0, %1 \n" + : "=&a" (res), "=&a" (tmp) + : "a" (x) + ); + + return res; +} +#define __arch_swab16 __arch_swab16 + +#endif /* _XTENSA_SWAB_H */ diff --git a/arch/xtensa/include/uapi/asm/termbits.h b/arch/xtensa/include/uapi/asm/termbits.h new file mode 100644 index 00000000000..0d6c8715b24 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/termbits.h @@ -0,0 +1,220 @@ +/* + * include/asm-xtensa/termbits.h + * + * Copied from SH. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_TERMBITS_H +#define _XTENSA_TERMBITS_H + + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ + +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ + +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ + +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ + +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ + +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 +#define EXTPROC 0200000 + +/* tcflow() and TCXONC use these */ + +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ + +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ + +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* _XTENSA_TERMBITS_H */ diff --git a/arch/xtensa/include/uapi/asm/termios.h b/arch/xtensa/include/uapi/asm/termios.h new file mode 100644 index 00000000000..32a770fe11e --- /dev/null +++ b/arch/xtensa/include/uapi/asm/termios.h @@ -0,0 +1,56 @@ +/* + * include/asm-xtensa/termios.h + * + * Copied from SH. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _UAPI_XTENSA_TERMIOS_H +#define _UAPI_XTENSA_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* Modem lines */ + +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + + +#endif /* _UAPI_XTENSA_TERMIOS_H */ diff --git a/arch/xtensa/include/uapi/asm/types.h b/arch/xtensa/include/uapi/asm/types.h new file mode 100644 index 00000000000..87ec7ae73cb --- /dev/null +++ b/arch/xtensa/include/uapi/asm/types.h @@ -0,0 +1,28 @@ +/* + * include/asm-xtensa/types.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef _UAPI_XTENSA_TYPES_H +#define _UAPI_XTENSA_TYPES_H + +#include + +#ifdef __ASSEMBLY__ +# define __XTENSA_UL(x) (x) +# define __XTENSA_UL_CONST(x) x +#else +# define __XTENSA_UL(x) ((unsigned long)(x)) +# define __XTENSA_UL_CONST(x) x##UL +#endif + +#ifndef __ASSEMBLY__ + +#endif + +#endif /* _UAPI_XTENSA_TYPES_H */ diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h new file mode 100644 index 00000000000..a842ed51921 --- /dev/null +++ b/arch/xtensa/include/uapi/asm/unistd.h @@ -0,0 +1,704 @@ +/* + * include/asm-xtensa/unistd.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 - 2005 Tensilica Inc. + */ + +#ifndef __SYSCALL +# define __SYSCALL(nr,func,nargs) +#endif + +#define __NR_spill 0 +__SYSCALL( 0, sys_ni_syscall, 0) +#define __NR_xtensa 1 +__SYSCALL( 1, sys_ni_syscall, 0) +#define __NR_available4 2 +__SYSCALL( 2, sys_ni_syscall, 0) +#define __NR_available5 3 +__SYSCALL( 3, sys_ni_syscall, 0) +#define __NR_available6 4 +__SYSCALL( 4, sys_ni_syscall, 0) +#define __NR_available7 5 +__SYSCALL( 5, sys_ni_syscall, 0) +#define __NR_available8 6 +__SYSCALL( 6, sys_ni_syscall, 0) +#define __NR_available9 7 +__SYSCALL( 7, sys_ni_syscall, 0) + +/* File Operations */ + +#define __NR_open 8 +__SYSCALL( 8, sys_open, 3) +#define __NR_close 9 +__SYSCALL( 9, sys_close, 1) +#define __NR_dup 10 +__SYSCALL( 10, sys_dup, 1) +#define __NR_dup2 11 +__SYSCALL( 11, sys_dup2, 2) +#define __NR_read 12 +__SYSCALL( 12, sys_read, 3) +#define __NR_write 13 +__SYSCALL( 13, sys_write, 3) +#define __NR_select 14 +__SYSCALL( 14, sys_select, 5) +#define __NR_lseek 15 +__SYSCALL( 15, sys_lseek, 3) +#define __NR_poll 16 +__SYSCALL( 16, sys_poll, 3) +#define __NR__llseek 17 +__SYSCALL( 17, sys_llseek, 5) +#define __NR_epoll_wait 18 +__SYSCALL( 18, sys_epoll_wait, 4) +#define __NR_epoll_ctl 19 +__SYSCALL( 19, sys_epoll_ctl, 4) +#define __NR_epoll_create 20 +__SYSCALL( 20, sys_epoll_create, 1) +#define __NR_creat 21 +__SYSCALL( 21, sys_creat, 2) +#define __NR_truncate 22 +__SYSCALL( 22, sys_truncate, 2) +#define __NR_ftruncate 23 +__SYSCALL( 23, sys_ftruncate, 2) +#define __NR_readv 24 +__SYSCALL( 24, sys_readv, 3) +#define __NR_writev 25 +__SYSCALL( 25, sys_writev, 3) +#define __NR_fsync 26 +__SYSCALL( 26, sys_fsync, 1) +#define __NR_fdatasync 27 +__SYSCALL( 27, sys_fdatasync, 1) +#define __NR_truncate64 28 +__SYSCALL( 28, sys_truncate64, 2) +#define __NR_ftruncate64 29 +__SYSCALL( 29, sys_ftruncate64, 2) +#define __NR_pread64 30 +__SYSCALL( 30, sys_pread64, 6) +#define __NR_pwrite64 31 +__SYSCALL( 31, sys_pwrite64, 6) + +#define __NR_link 32 +__SYSCALL( 32, sys_link, 2) +#define __NR_rename 33 +__SYSCALL( 33, sys_rename, 2) +#define __NR_symlink 34 +__SYSCALL( 34, sys_symlink, 2) +#define __NR_readlink 35 +__SYSCALL( 35, sys_readlink, 3) +#define __NR_mknod 36 +__SYSCALL( 36, sys_mknod, 3) +#define __NR_pipe 37 +__SYSCALL( 37, sys_pipe, 1) +#define __NR_unlink 38 +__SYSCALL( 38, sys_unlink, 1) +#define __NR_rmdir 39 +__SYSCALL( 39, sys_rmdir, 1) + +#define __NR_mkdir 40 +__SYSCALL( 40, sys_mkdir, 2) +#define __NR_chdir 41 +__SYSCALL( 41, sys_chdir, 1) +#define __NR_fchdir 42 +__SYSCALL( 42, sys_fchdir, 1) +#define __NR_getcwd 43 +__SYSCALL( 43, sys_getcwd, 2) + +#define __NR_chmod 44 +__SYSCALL( 44, sys_chmod, 2) +#define __NR_chown 45 +__SYSCALL( 45, sys_chown, 3) +#define __NR_stat 46 +__SYSCALL( 46, sys_newstat, 2) +#define __NR_stat64 47 +__SYSCALL( 47, sys_stat64, 2) + +#define __NR_lchown 48 +__SYSCALL( 48, sys_lchown, 3) +#define __NR_lstat 49 +__SYSCALL( 49, sys_newlstat, 2) +#define __NR_lstat64 50 +__SYSCALL( 50, sys_lstat64, 2) +#define __NR_available51 51 +__SYSCALL( 51, sys_ni_syscall, 0) + +#define __NR_fchmod 52 +__SYSCALL( 52, sys_fchmod, 2) +#define __NR_fchown 53 +__SYSCALL( 53, sys_fchown, 3) +#define __NR_fstat 54 +__SYSCALL( 54, sys_newfstat, 2) +#define __NR_fstat64 55 +__SYSCALL( 55, sys_fstat64, 2) + +#define __NR_flock 56 +__SYSCALL( 56, sys_flock, 2) +#define __NR_access 57 +__SYSCALL( 57, sys_access, 2) +#define __NR_umask 58 +__SYSCALL( 58, sys_umask, 1) +#define __NR_getdents 59 +__SYSCALL( 59, sys_getdents, 3) +#define __NR_getdents64 60 +__SYSCALL( 60, sys_getdents64, 3) +#define __NR_fcntl64 61 +__SYSCALL( 61, sys_fcntl64, 3) +#define __NR_available62 62 +__SYSCALL( 62, sys_ni_syscall, 0) +#define __NR_fadvise64_64 63 +__SYSCALL( 63, xtensa_fadvise64_64, 6) +#define __NR_utime 64 /* glibc 2.3.3 ?? */ +__SYSCALL( 64, sys_utime, 2) +#define __NR_utimes 65 +__SYSCALL( 65, sys_utimes, 2) +#define __NR_ioctl 66 +__SYSCALL( 66, sys_ioctl, 3) +#define __NR_fcntl 67 +__SYSCALL( 67, sys_fcntl, 3) + +#define __NR_setxattr 68 +__SYSCALL( 68, sys_setxattr, 5) +#define __NR_getxattr 69 +__SYSCALL( 69, sys_getxattr, 4) +#define __NR_listxattr 70 +__SYSCALL( 70, sys_listxattr, 3) +#define __NR_removexattr 71 +__SYSCALL( 71, sys_removexattr, 2) +#define __NR_lsetxattr 72 +__SYSCALL( 72, sys_lsetxattr, 5) +#define __NR_lgetxattr 73 +__SYSCALL( 73, sys_lgetxattr, 4) +#define __NR_llistxattr 74 +__SYSCALL( 74, sys_llistxattr, 3) +#define __NR_lremovexattr 75 +__SYSCALL( 75, sys_lremovexattr, 2) +#define __NR_fsetxattr 76 +__SYSCALL( 76, sys_fsetxattr, 5) +#define __NR_fgetxattr 77 +__SYSCALL( 77, sys_fgetxattr, 4) +#define __NR_flistxattr 78 +__SYSCALL( 78, sys_flistxattr, 3) +#define __NR_fremovexattr 79 +__SYSCALL( 79, sys_fremovexattr, 2) + +/* File Map / Shared Memory Operations */ + +#define __NR_mmap2 80 +__SYSCALL( 80, sys_mmap_pgoff, 6) +#define __NR_munmap 81 +__SYSCALL( 81, sys_munmap, 2) +#define __NR_mprotect 82 +__SYSCALL( 82, sys_mprotect, 3) +#define __NR_brk 83 +__SYSCALL( 83, sys_brk, 1) +#define __NR_mlock 84 +__SYSCALL( 84, sys_mlock, 2) +#define __NR_munlock 85 +__SYSCALL( 85, sys_munlock, 2) +#define __NR_mlockall 86 +__SYSCALL( 86, sys_mlockall, 1) +#define __NR_munlockall 87 +__SYSCALL( 87, sys_munlockall, 0) +#define __NR_mremap 88 +__SYSCALL( 88, sys_mremap, 4) +#define __NR_msync 89 +__SYSCALL( 89, sys_msync, 3) +#define __NR_mincore 90 +__SYSCALL( 90, sys_mincore, 3) +#define __NR_madvise 91 +__SYSCALL( 91, sys_madvise, 3) +#define __NR_shmget 92 +__SYSCALL( 92, sys_shmget, 4) +#define __NR_shmat 93 +__SYSCALL( 93, xtensa_shmat, 4) +#define __NR_shmctl 94 +__SYSCALL( 94, sys_shmctl, 4) +#define __NR_shmdt 95 +__SYSCALL( 95, sys_shmdt, 4) + +/* Socket Operations */ + +#define __NR_socket 96 +__SYSCALL( 96, sys_socket, 3) +#define __NR_setsockopt 97 +__SYSCALL( 97, sys_setsockopt, 5) +#define __NR_getsockopt 98 +__SYSCALL( 98, sys_getsockopt, 5) +#define __NR_shutdown 99 +__SYSCALL( 99, sys_shutdown, 2) + +#define __NR_bind 100 +__SYSCALL(100, sys_bind, 3) +#define __NR_connect 101 +__SYSCALL(101, sys_connect, 3) +#define __NR_listen 102 +__SYSCALL(102, sys_listen, 2) +#define __NR_accept 103 +__SYSCALL(103, sys_accept, 3) + +#define __NR_getsockname 104 +__SYSCALL(104, sys_getsockname, 3) +#define __NR_getpeername 105 +__SYSCALL(105, sys_getpeername, 3) +#define __NR_sendmsg 106 +__SYSCALL(106, sys_sendmsg, 3) +#define __NR_recvmsg 107 +__SYSCALL(107, sys_recvmsg, 3) +#define __NR_send 108 +__SYSCALL(108, sys_send, 4) +#define __NR_recv 109 +__SYSCALL(109, sys_recv, 4) +#define __NR_sendto 110 +__SYSCALL(110, sys_sendto, 6) +#define __NR_recvfrom 111 +__SYSCALL(111, sys_recvfrom, 6) + +#define __NR_socketpair 112 +__SYSCALL(112, sys_socketpair, 4) +#define __NR_sendfile 113 +__SYSCALL(113, sys_sendfile, 4) +#define __NR_sendfile64 114 +__SYSCALL(114, sys_sendfile64, 4) +#define __NR_available115 115 +__SYSCALL(115, sys_ni_syscall, 0) + +/* Process Operations */ + +#define __NR_clone 116 +__SYSCALL(116, xtensa_clone, 5) +#define __NR_execve 117 +__SYSCALL(117, xtensa_execve, 3) +#define __NR_exit 118 +__SYSCALL(118, sys_exit, 1) +#define __NR_exit_group 119 +__SYSCALL(119, sys_exit_group, 1) +#define __NR_getpid 120 +__SYSCALL(120, sys_getpid, 0) +#define __NR_wait4 121 +__SYSCALL(121, sys_wait4, 4) +#define __NR_waitid 122 +__SYSCALL(122, sys_waitid, 5) +#define __NR_kill 123 +__SYSCALL(123, sys_kill, 2) +#define __NR_tkill 124 +__SYSCALL(124, sys_tkill, 2) +#define __NR_tgkill 125 +__SYSCALL(125, sys_tgkill, 3) +#define __NR_set_tid_address 126 +__SYSCALL(126, sys_set_tid_address, 1) +#define __NR_gettid 127 +__SYSCALL(127, sys_gettid, 0) +#define __NR_setsid 128 +__SYSCALL(128, sys_setsid, 0) +#define __NR_getsid 129 +__SYSCALL(129, sys_getsid, 1) +#define __NR_prctl 130 +__SYSCALL(130, sys_prctl, 5) +#define __NR_personality 131 +__SYSCALL(131, sys_personality, 1) +#define __NR_getpriority 132 +__SYSCALL(132, sys_getpriority, 2) +#define __NR_setpriority 133 +__SYSCALL(133, sys_setpriority, 3) +#define __NR_setitimer 134 +__SYSCALL(134, sys_setitimer, 3) +#define __NR_getitimer 135 +__SYSCALL(135, sys_getitimer, 2) +#define __NR_setuid 136 +__SYSCALL(136, sys_setuid, 1) +#define __NR_getuid 137 +__SYSCALL(137, sys_getuid, 0) +#define __NR_setgid 138 +__SYSCALL(138, sys_setgid, 1) +#define __NR_getgid 139 +__SYSCALL(139, sys_getgid, 0) +#define __NR_geteuid 140 +__SYSCALL(140, sys_geteuid, 0) +#define __NR_getegid 141 +__SYSCALL(141, sys_getegid, 0) +#define __NR_setreuid 142 +__SYSCALL(142, sys_setreuid, 2) +#define __NR_setregid 143 +__SYSCALL(143, sys_setregid, 2) +#define __NR_setresuid 144 +__SYSCALL(144, sys_setresuid, 3) +#define __NR_getresuid 145 +__SYSCALL(145, sys_getresuid, 3) +#define __NR_setresgid 146 +__SYSCALL(146, sys_setresgid, 3) +#define __NR_getresgid 147 +__SYSCALL(147, sys_getresgid, 3) +#define __NR_setpgid 148 +__SYSCALL(148, sys_setpgid, 2) +#define __NR_getpgid 149 +__SYSCALL(149, sys_getpgid, 1) +#define __NR_getppid 150 +__SYSCALL(150, sys_getppid, 0) +#define __NR_getpgrp 151 +__SYSCALL(151, sys_getpgrp, 0) + +#define __NR_reserved152 152 /* set_thread_area */ +__SYSCALL(152, sys_ni_syscall, 0) +#define __NR_reserved153 153 /* get_thread_area */ +__SYSCALL(153, sys_ni_syscall, 0) +#define __NR_times 154 +__SYSCALL(154, sys_times, 1) +#define __NR_acct 155 +__SYSCALL(155, sys_acct, 1) +#define __NR_sched_setaffinity 156 +__SYSCALL(156, sys_sched_setaffinity, 3) +#define __NR_sched_getaffinity 157 +__SYSCALL(157, sys_sched_getaffinity, 3) +#define __NR_capget 158 +__SYSCALL(158, sys_capget, 2) +#define __NR_capset 159 +__SYSCALL(159, sys_capset, 2) +#define __NR_ptrace 160 +__SYSCALL(160, sys_ptrace, 4) +#define __NR_semtimedop 161 +__SYSCALL(161, sys_semtimedop, 5) +#define __NR_semget 162 +__SYSCALL(162, sys_semget, 4) +#define __NR_semop 163 +__SYSCALL(163, sys_semop, 4) +#define __NR_semctl 164 +__SYSCALL(164, sys_semctl, 4) +#define __NR_available165 165 +__SYSCALL(165, sys_ni_syscall, 0) +#define __NR_msgget 166 +__SYSCALL(166, sys_msgget, 4) +#define __NR_msgsnd 167 +__SYSCALL(167, sys_msgsnd, 4) +#define __NR_msgrcv 168 +__SYSCALL(168, sys_msgrcv, 4) +#define __NR_msgctl 169 +__SYSCALL(169, sys_msgctl, 4) +#define __NR_available170 170 +__SYSCALL(170, sys_ni_syscall, 0) +#define __NR_available171 171 +__SYSCALL(171, sys_ni_syscall, 0) + +/* File System */ + +#define __NR_mount 172 +__SYSCALL(172, sys_mount, 5) +#define __NR_swapon 173 +__SYSCALL(173, sys_swapon, 2) +#define __NR_chroot 174 +__SYSCALL(174, sys_chroot, 1) +#define __NR_pivot_root 175 +__SYSCALL(175, sys_pivot_root, 2) +#define __NR_umount 176 +__SYSCALL(176, sys_umount, 2) +#define __NR_swapoff 177 +__SYSCALL(177, sys_swapoff, 1) +#define __NR_sync 178 +__SYSCALL(178, sys_sync, 0) +#define __NR_available179 179 +__SYSCALL(179, sys_ni_syscall, 0) +#define __NR_setfsuid 180 +__SYSCALL(180, sys_setfsuid, 1) +#define __NR_setfsgid 181 +__SYSCALL(181, sys_setfsgid, 1) +#define __NR_sysfs 182 +__SYSCALL(182, sys_sysfs, 3) +#define __NR_ustat 183 +__SYSCALL(183, sys_ustat, 2) +#define __NR_statfs 184 +__SYSCALL(184, sys_statfs, 2) +#define __NR_fstatfs 185 +__SYSCALL(185, sys_fstatfs, 2) +#define __NR_statfs64 186 +__SYSCALL(186, sys_statfs64, 3) +#define __NR_fstatfs64 187 +__SYSCALL(187, sys_fstatfs64, 3) + +/* System */ + +#define __NR_setrlimit 188 +__SYSCALL(188, sys_setrlimit, 2) +#define __NR_getrlimit 189 +__SYSCALL(189, sys_getrlimit, 2) +#define __NR_getrusage 190 +__SYSCALL(190, sys_getrusage, 2) +#define __NR_futex 191 +__SYSCALL(191, sys_futex, 5) +#define __NR_gettimeofday 192 +__SYSCALL(192, sys_gettimeofday, 2) +#define __NR_settimeofday 193 +__SYSCALL(193, sys_settimeofday, 2) +#define __NR_adjtimex 194 +__SYSCALL(194, sys_adjtimex, 1) +#define __NR_nanosleep 195 +__SYSCALL(195, sys_nanosleep, 2) +#define __NR_getgroups 196 +__SYSCALL(196, sys_getgroups, 2) +#define __NR_setgroups 197 +__SYSCALL(197, sys_setgroups, 2) +#define __NR_sethostname 198 +__SYSCALL(198, sys_sethostname, 2) +#define __NR_setdomainname 199 +__SYSCALL(199, sys_setdomainname, 2) +#define __NR_syslog 200 +__SYSCALL(200, sys_syslog, 3) +#define __NR_vhangup 201 +__SYSCALL(201, sys_vhangup, 0) +#define __NR_uselib 202 +__SYSCALL(202, sys_uselib, 1) +#define __NR_reboot 203 +__SYSCALL(203, sys_reboot, 3) +#define __NR_quotactl 204 +__SYSCALL(204, sys_quotactl, 4) +#define __NR_nfsservctl 205 +__SYSCALL(205, sys_ni_syscall, 0) +#define __NR__sysctl 206 +__SYSCALL(206, sys_sysctl, 1) +#define __NR_bdflush 207 +__SYSCALL(207, sys_bdflush, 2) +#define __NR_uname 208 +__SYSCALL(208, sys_newuname, 1) +#define __NR_sysinfo 209 +__SYSCALL(209, sys_sysinfo, 1) +#define __NR_init_module 210 +__SYSCALL(210, sys_init_module, 2) +#define __NR_delete_module 211 +__SYSCALL(211, sys_delete_module, 1) + +#define __NR_sched_setparam 212 +__SYSCALL(212, sys_sched_setparam, 2) +#define __NR_sched_getparam 213 +__SYSCALL(213, sys_sched_getparam, 2) +#define __NR_sched_setscheduler 214 +__SYSCALL(214, sys_sched_setscheduler, 3) +#define __NR_sched_getscheduler 215 +__SYSCALL(215, sys_sched_getscheduler, 1) +#define __NR_sched_get_priority_max 216 +__SYSCALL(216, sys_sched_get_priority_max, 1) +#define __NR_sched_get_priority_min 217 +__SYSCALL(217, sys_sched_get_priority_min, 1) +#define __NR_sched_rr_get_interval 218 +__SYSCALL(218, sys_sched_rr_get_interval, 2) +#define __NR_sched_yield 219 +__SYSCALL(219, sys_sched_yield, 0) +#define __NR_available222 222 +__SYSCALL(222, sys_ni_syscall, 0) + +/* Signal Handling */ + +#define __NR_restart_syscall 223 +__SYSCALL(223, sys_restart_syscall, 0) +#define __NR_sigaltstack 224 +__SYSCALL(224, xtensa_sigaltstack, 2) +#define __NR_rt_sigreturn 225 +__SYSCALL(225, xtensa_rt_sigreturn, 1) +#define __NR_rt_sigaction 226 +__SYSCALL(226, sys_rt_sigaction, 4) +#define __NR_rt_sigprocmask 227 +__SYSCALL(227, sys_rt_sigprocmask, 4) +#define __NR_rt_sigpending 228 +__SYSCALL(228, sys_rt_sigpending, 2) +#define __NR_rt_sigtimedwait 229 +__SYSCALL(229, sys_rt_sigtimedwait, 4) +#define __NR_rt_sigqueueinfo 230 +__SYSCALL(230, sys_rt_sigqueueinfo, 3) +#define __NR_rt_sigsuspend 231 +__SYSCALL(231, sys_rt_sigsuspend, 2) + +/* Message */ + +#define __NR_mq_open 232 +__SYSCALL(232, sys_mq_open, 4) +#define __NR_mq_unlink 233 +__SYSCALL(233, sys_mq_unlink, 1) +#define __NR_mq_timedsend 234 +__SYSCALL(234, sys_mq_timedsend, 5) +#define __NR_mq_timedreceive 235 +__SYSCALL(235, sys_mq_timedreceive, 5) +#define __NR_mq_notify 236 +__SYSCALL(236, sys_mq_notify, 2) +#define __NR_mq_getsetattr 237 +__SYSCALL(237, sys_mq_getsetattr, 3) +#define __NR_available238 238 +__SYSCALL(238, sys_ni_syscall, 0) + +/* IO */ + +#define __NR_io_setup 239 +__SYSCALL(239, sys_io_setup, 2) +#define __NR_io_destroy 240 +__SYSCALL(240, sys_io_destroy, 1) +#define __NR_io_submit 241 +__SYSCALL(241, sys_io_submit, 3) +#define __NR_io_getevents 242 +__SYSCALL(242, sys_io_getevents, 5) +#define __NR_io_cancel 243 +__SYSCALL(243, sys_io_cancel, 3) +#define __NR_clock_settime 244 +__SYSCALL(244, sys_clock_settime, 2) +#define __NR_clock_gettime 245 +__SYSCALL(245, sys_clock_gettime, 2) +#define __NR_clock_getres 246 +__SYSCALL(246, sys_clock_getres, 2) +#define __NR_clock_nanosleep 247 +__SYSCALL(247, sys_clock_nanosleep, 4) + +/* Timer */ + +#define __NR_timer_create 248 +__SYSCALL(248, sys_timer_create, 3) +#define __NR_timer_delete 249 +__SYSCALL(249, sys_timer_delete, 1) +#define __NR_timer_settime 250 +__SYSCALL(250, sys_timer_settime, 4) +#define __NR_timer_gettime 251 +__SYSCALL(251, sys_timer_gettime, 2) +#define __NR_timer_getoverrun 252 +__SYSCALL(252, sys_timer_getoverrun, 1) + +/* System */ + +#define __NR_reserved244 253 +__SYSCALL(253, sys_ni_syscall, 0) +#define __NR_lookup_dcookie 254 +__SYSCALL(254, sys_lookup_dcookie, 4) +#define __NR_available255 255 +__SYSCALL(255, sys_ni_syscall, 0) +#define __NR_add_key 256 +__SYSCALL(256, sys_add_key, 5) +#define __NR_request_key 257 +__SYSCALL(257, sys_request_key, 5) +#define __NR_keyctl 258 +__SYSCALL(258, sys_keyctl, 5) +#define __NR_available259 259 +__SYSCALL(259, sys_ni_syscall, 0) + + +#define __NR_readahead 260 +__SYSCALL(260, sys_readahead, 5) +#define __NR_remap_file_pages 261 +__SYSCALL(261, sys_remap_file_pages, 5) +#define __NR_migrate_pages 262 +__SYSCALL(262, sys_migrate_pages, 0) +#define __NR_mbind 263 +__SYSCALL(263, sys_mbind, 6) +#define __NR_get_mempolicy 264 +__SYSCALL(264, sys_get_mempolicy, 5) +#define __NR_set_mempolicy 265 +__SYSCALL(265, sys_set_mempolicy, 3) +#define __NR_unshare 266 +__SYSCALL(266, sys_unshare, 1) +#define __NR_move_pages 267 +__SYSCALL(267, sys_move_pages, 0) +#define __NR_splice 268 +__SYSCALL(268, sys_splice, 0) +#define __NR_tee 269 +__SYSCALL(269, sys_tee, 0) +#define __NR_vmsplice 270 +__SYSCALL(270, sys_vmsplice, 0) +#define __NR_available271 271 +__SYSCALL(271, sys_ni_syscall, 0) + +#define __NR_pselect6 272 +__SYSCALL(272, sys_pselect6, 0) +#define __NR_ppoll 273 +__SYSCALL(273, sys_ppoll, 0) +#define __NR_epoll_pwait 274 +__SYSCALL(274, sys_epoll_pwait, 0) +#define __NR_available275 275 +__SYSCALL(275, sys_ni_syscall, 0) + +#define __NR_inotify_init 276 +__SYSCALL(276, sys_inotify_init, 0) +#define __NR_inotify_add_watch 277 +__SYSCALL(277, sys_inotify_add_watch, 3) +#define __NR_inotify_rm_watch 278 +__SYSCALL(278, sys_inotify_rm_watch, 2) +#define __NR_available279 279 +__SYSCALL(279, sys_ni_syscall, 0) + +#define __NR_getcpu 280 +__SYSCALL(280, sys_getcpu, 0) +#define __NR_kexec_load 281 +__SYSCALL(281, sys_ni_syscall, 0) + +#define __NR_ioprio_set 282 +__SYSCALL(282, sys_ioprio_set, 2) +#define __NR_ioprio_get 283 +__SYSCALL(283, sys_ioprio_get, 3) + +#define __NR_set_robust_list 284 +__SYSCALL(284, sys_set_robust_list, 3) +#define __NR_get_robust_list 285 +__SYSCALL(285, sys_get_robust_list, 3) +#define __NR_reserved286 286 /* sync_file_rangeX */ +__SYSCALL(286, sys_ni_syscall, 3) +#define __NR_available287 287 +__SYSCALL(287, sys_faccessat, 0) + +/* Relative File Operations */ + +#define __NR_openat 288 +__SYSCALL(288, sys_openat, 4) +#define __NR_mkdirat 289 +__SYSCALL(289, sys_mkdirat, 3) +#define __NR_mknodat 290 +__SYSCALL(290, sys_mknodat, 4) +#define __NR_unlinkat 291 +__SYSCALL(291, sys_unlinkat, 3) +#define __NR_renameat 292 +__SYSCALL(292, sys_renameat, 4) +#define __NR_linkat 293 +__SYSCALL(293, sys_linkat, 5) +#define __NR_symlinkat 294 +__SYSCALL(294, sys_symlinkat, 3) +#define __NR_readlinkat 295 +__SYSCALL(295, sys_readlinkat, 4) +#define __NR_utimensat 296 +__SYSCALL(296, sys_utimensat, 0) +#define __NR_fchownat 297 +__SYSCALL(297, sys_fchownat, 5) +#define __NR_futimesat 298 +__SYSCALL(298, sys_futimesat, 4) +#define __NR_fstatat64 299 +__SYSCALL(299, sys_fstatat64, 0) +#define __NR_fchmodat 300 +__SYSCALL(300, sys_fchmodat, 4) +#define __NR_faccessat 301 +__SYSCALL(301, sys_faccessat, 4) +#define __NR_available302 302 +__SYSCALL(302, sys_ni_syscall, 0) +#define __NR_available303 303 +__SYSCALL(303, sys_ni_syscall, 0) + +#define __NR_signalfd 304 +__SYSCALL(304, sys_signalfd, 3) +/* 305 was __NR_timerfd */ +__SYSCALL(305, sys_ni_syscall, 0) +#define __NR_eventfd 306 +__SYSCALL(306, sys_eventfd, 1) +#define __NR_recvmmsg 307 +__SYSCALL(307, sys_recvmmsg, 5) +#define __NR_setns 308 +__SYSCALL(308, sys_setns, 2) + +#define __NR_syscall_count 309 + +/* + * sysxtensa syscall handler + * + * int sysxtensa (SYS_XTENSA_ATOMIC_SET, ptr, val, unused); + * int sysxtensa (SYS_XTENSA_ATOMIC_ADD, ptr, val, unused); + * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val, unused); + * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval); + * a2 a6 a3 a4 a5 + */ + +#define SYS_XTENSA_RESERVED 0 /* don't use this */ +#define SYS_XTENSA_ATOMIC_SET 1 /* set variable */ +#define SYS_XTENSA_ATOMIC_EXG_ADD 2 /* exchange memory and add */ +#define SYS_XTENSA_ATOMIC_ADD 3 /* add to memory */ +#define SYS_XTENSA_ATOMIC_CMP_SWP 4 /* compare and swap */ + +#define SYS_XTENSA_COUNT 5 /* count */ diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c index 05b3f093d5d..a5c01e74d5d 100644 --- a/arch/xtensa/kernel/syscall.c +++ b/arch/xtensa/kernel/syscall.c @@ -34,7 +34,6 @@ syscall_t sys_call_table[__NR_syscall_count] /* FIXME __cacheline_aligned */= { #undef __SYSCALL #define __SYSCALL(nr,symbol,nargs) [ nr ] = (syscall_t)symbol, -#undef _XTENSA_UNISTD_H #undef __KERNEL_SYSCALLS__ #include }; -- cgit v1.2.3-70-g09d2 From 795ca178c4fbb4e5d703df8cdab5c1711ba402b1 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 15 Oct 2012 03:55:41 +0400 Subject: xtensa: Use Kbuild infrastructure to handle asm-generic headers Use Kbuild infrastructure to handle the asm-generic headers and remove the wrapper headers that call them. This only affects headers that do nothing but include the generic equivalent. It does not touch any header that does a little more. Signed-off-by: Steven Rostedt Signed-off-by: Max Filippov Signed-off-by: Chris Zankel --- arch/xtensa/include/asm/Kbuild | 27 +++++++++++- arch/xtensa/include/asm/bug.h | 18 -------- arch/xtensa/include/asm/cputime.h | 6 --- arch/xtensa/include/asm/device.h | 7 ---- arch/xtensa/include/asm/div64.h | 16 -------- arch/xtensa/include/asm/emergency-restart.h | 6 --- arch/xtensa/include/asm/futex.h | 1 - arch/xtensa/include/asm/hardirq.h | 16 -------- arch/xtensa/include/asm/irq_regs.h | 1 - arch/xtensa/include/asm/kdebug.h | 1 - arch/xtensa/include/asm/kmap_types.h | 6 --- arch/xtensa/include/asm/local.h | 16 -------- arch/xtensa/include/asm/local64.h | 1 - arch/xtensa/include/asm/percpu.h | 16 -------- arch/xtensa/include/asm/scatterlist.h | 16 -------- arch/xtensa/include/asm/sections.h | 16 -------- arch/xtensa/include/asm/termios.h | 64 ----------------------------- arch/xtensa/include/asm/topology.h | 16 -------- arch/xtensa/include/asm/xor.h | 16 -------- arch/xtensa/include/uapi/asm/Kbuild | 9 ---- arch/xtensa/include/uapi/asm/bitsperlong.h | 1 - arch/xtensa/include/uapi/asm/errno.h | 16 -------- arch/xtensa/include/uapi/asm/fcntl.h | 1 - arch/xtensa/include/uapi/asm/ioctl.h | 1 - arch/xtensa/include/uapi/asm/kvm_para.h | 1 - arch/xtensa/include/uapi/asm/resource.h | 16 -------- arch/xtensa/include/uapi/asm/siginfo.h | 16 -------- arch/xtensa/include/uapi/asm/statfs.h | 17 -------- arch/xtensa/include/uapi/asm/termios.h | 56 ------------------------- 29 files changed, 26 insertions(+), 374 deletions(-) delete mode 100644 arch/xtensa/include/asm/bug.h delete mode 100644 arch/xtensa/include/asm/cputime.h delete mode 100644 arch/xtensa/include/asm/device.h delete mode 100644 arch/xtensa/include/asm/div64.h delete mode 100644 arch/xtensa/include/asm/emergency-restart.h delete mode 100644 arch/xtensa/include/asm/futex.h delete mode 100644 arch/xtensa/include/asm/hardirq.h delete mode 100644 arch/xtensa/include/asm/irq_regs.h delete mode 100644 arch/xtensa/include/asm/kdebug.h delete mode 100644 arch/xtensa/include/asm/kmap_types.h delete mode 100644 arch/xtensa/include/asm/local.h delete mode 100644 arch/xtensa/include/asm/local64.h delete mode 100644 arch/xtensa/include/asm/percpu.h delete mode 100644 arch/xtensa/include/asm/scatterlist.h delete mode 100644 arch/xtensa/include/asm/sections.h delete mode 100644 arch/xtensa/include/asm/termios.h delete mode 100644 arch/xtensa/include/asm/topology.h delete mode 100644 arch/xtensa/include/asm/xor.h delete mode 100644 arch/xtensa/include/uapi/asm/bitsperlong.h delete mode 100644 arch/xtensa/include/uapi/asm/errno.h delete mode 100644 arch/xtensa/include/uapi/asm/fcntl.h delete mode 100644 arch/xtensa/include/uapi/asm/ioctl.h delete mode 100644 arch/xtensa/include/uapi/asm/kvm_para.h delete mode 100644 arch/xtensa/include/uapi/asm/resource.h delete mode 100644 arch/xtensa/include/uapi/asm/siginfo.h delete mode 100644 arch/xtensa/include/uapi/asm/statfs.h delete mode 100644 arch/xtensa/include/uapi/asm/termios.h diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild index 4a159da2363..6d130278999 100644 --- a/arch/xtensa/include/asm/Kbuild +++ b/arch/xtensa/include/asm/Kbuild @@ -1,3 +1,28 @@ - +generic-y += bitsperlong.h +generic-y += bug.h generic-y += clkdev.h +generic-y += cputime.h +generic-y += device.h +generic-y += div64.h +generic-y += emergency-restart.h +generic-y += errno.h generic-y += exec.h +generic-y += fcntl.h +generic-y += futex.h +generic-y += hardirq.h +generic-y += ioctl.h +generic-y += irq_regs.h +generic-y += kdebug.h +generic-y += kmap_types.h +generic-y += kvm_para.h +generic-y += local.h +generic-y += local64.h +generic-y += percpu.h +generic-y += resource.h +generic-y += scatterlist.h +generic-y += sections.h +generic-y += siginfo.h +generic-y += statfs.h +generic-y += termios.h +generic-y += topology.h +generic-y += xor.h diff --git a/arch/xtensa/include/asm/bug.h b/arch/xtensa/include/asm/bug.h deleted file mode 100644 index 3e52d72712f..00000000000 --- a/arch/xtensa/include/asm/bug.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * include/asm-xtensa/bug.h - * - * Macros to cause a 'bug' message. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_BUG_H -#define _XTENSA_BUG_H - -#include - -#endif /* _XTENSA_BUG_H */ diff --git a/arch/xtensa/include/asm/cputime.h b/arch/xtensa/include/asm/cputime.h deleted file mode 100644 index a7fb864a50a..00000000000 --- a/arch/xtensa/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _XTENSA_CPUTIME_H -#define _XTENSA_CPUTIME_H - -#include - -#endif /* _XTENSA_CPUTIME_H */ diff --git a/arch/xtensa/include/asm/device.h b/arch/xtensa/include/asm/device.h deleted file mode 100644 index d8f9872b0e2..00000000000 --- a/arch/xtensa/include/asm/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include - diff --git a/arch/xtensa/include/asm/div64.h b/arch/xtensa/include/asm/div64.h deleted file mode 100644 index f35678cb0a9..00000000000 --- a/arch/xtensa/include/asm/div64.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/div64.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2007 Tensilica Inc. - */ - -#ifndef _XTENSA_DIV64_H -#define _XTENSA_DIV64_H - -#include - -#endif /* _XTENSA_DIV64_H */ diff --git a/arch/xtensa/include/asm/emergency-restart.h b/arch/xtensa/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c48e42..00000000000 --- a/arch/xtensa/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/xtensa/include/asm/futex.h b/arch/xtensa/include/asm/futex.h deleted file mode 100644 index 0b745828f42..00000000000 --- a/arch/xtensa/include/asm/futex.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/hardirq.h b/arch/xtensa/include/asm/hardirq.h deleted file mode 100644 index 91695a13549..00000000000 --- a/arch/xtensa/include/asm/hardirq.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/hardirq.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_HARDIRQ_H -#define _XTENSA_HARDIRQ_H - -#include - -#endif /* _XTENSA_HARDIRQ_H */ diff --git a/arch/xtensa/include/asm/irq_regs.h b/arch/xtensa/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b7027..00000000000 --- a/arch/xtensa/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/kdebug.h b/arch/xtensa/include/asm/kdebug.h deleted file mode 100644 index 6ece1b03766..00000000000 --- a/arch/xtensa/include/asm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/kmap_types.h b/arch/xtensa/include/asm/kmap_types.h deleted file mode 100644 index 11c687e527f..00000000000 --- a/arch/xtensa/include/asm/kmap_types.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _XTENSA_KMAP_TYPES_H -#define _XTENSA_KMAP_TYPES_H - -#include - -#endif /* _XTENSA_KMAP_TYPES_H */ diff --git a/arch/xtensa/include/asm/local.h b/arch/xtensa/include/asm/local.h deleted file mode 100644 index 48723e550d1..00000000000 --- a/arch/xtensa/include/asm/local.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/local.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_LOCAL_H -#define _XTENSA_LOCAL_H - -#include - -#endif /* _XTENSA_LOCAL_H */ diff --git a/arch/xtensa/include/asm/local64.h b/arch/xtensa/include/asm/local64.h deleted file mode 100644 index 36c93b5cc23..00000000000 --- a/arch/xtensa/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/asm/percpu.h b/arch/xtensa/include/asm/percpu.h deleted file mode 100644 index 6d2bc2ada9d..00000000000 --- a/arch/xtensa/include/asm/percpu.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * linux/include/asm-xtensa/percpu.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_PERCPU__ -#define _XTENSA_PERCPU__ - -#include - -#endif /* _XTENSA_PERCPU__ */ diff --git a/arch/xtensa/include/asm/scatterlist.h b/arch/xtensa/include/asm/scatterlist.h deleted file mode 100644 index a0421a61d9e..00000000000 --- a/arch/xtensa/include/asm/scatterlist.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/scatterlist.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SCATTERLIST_H -#define _XTENSA_SCATTERLIST_H - -#include - -#endif /* _XTENSA_SCATTERLIST_H */ diff --git a/arch/xtensa/include/asm/sections.h b/arch/xtensa/include/asm/sections.h deleted file mode 100644 index 40b5191b55a..00000000000 --- a/arch/xtensa/include/asm/sections.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/sections.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SECTIONS_H -#define _XTENSA_SECTIONS_H - -#include - -#endif /* _XTENSA_SECTIONS_H */ diff --git a/arch/xtensa/include/asm/termios.h b/arch/xtensa/include/asm/termios.h deleted file mode 100644 index 8b661ca47d5..00000000000 --- a/arch/xtensa/include/asm/termios.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * include/asm-xtensa/termios.h - * - * Copied from SH. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ -#ifndef _XTENSA_TERMIOS_H -#define _XTENSA_TERMIOS_H - -#include - - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ - -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ - -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* _XTENSA_TERMIOS_H */ diff --git a/arch/xtensa/include/asm/topology.h b/arch/xtensa/include/asm/topology.h deleted file mode 100644 index 7309e38a0cc..00000000000 --- a/arch/xtensa/include/asm/topology.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/topology.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_TOPOLOGY_H -#define _XTENSA_TOPOLOGY_H - -#include - -#endif /* _XTENSA_TOPOLOGY_H */ diff --git a/arch/xtensa/include/asm/xor.h b/arch/xtensa/include/asm/xor.h deleted file mode 100644 index e7b1f083991..00000000000 --- a/arch/xtensa/include/asm/xor.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/xor.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_XOR_H -#define _XTENSA_XOR_H - -#include - -#endif diff --git a/arch/xtensa/include/uapi/asm/Kbuild b/arch/xtensa/include/uapi/asm/Kbuild index 040178cdb3e..56aad54e7fb 100644 --- a/arch/xtensa/include/uapi/asm/Kbuild +++ b/arch/xtensa/include/uapi/asm/Kbuild @@ -2,33 +2,24 @@ include include/uapi/asm-generic/Kbuild.asm header-y += auxvec.h -header-y += bitsperlong.h header-y += byteorder.h -header-y += errno.h -header-y += fcntl.h -header-y += ioctl.h header-y += ioctls.h header-y += ipcbuf.h -header-y += kvm_para.h header-y += mman.h header-y += msgbuf.h header-y += param.h header-y += poll.h header-y += posix_types.h header-y += ptrace.h -header-y += resource.h header-y += sembuf.h header-y += setup.h header-y += shmbuf.h header-y += sigcontext.h -header-y += siginfo.h header-y += signal.h header-y += socket.h header-y += sockios.h header-y += stat.h -header-y += statfs.h header-y += swab.h header-y += termbits.h -header-y += termios.h header-y += types.h header-y += unistd.h diff --git a/arch/xtensa/include/uapi/asm/bitsperlong.h b/arch/xtensa/include/uapi/asm/bitsperlong.h deleted file mode 100644 index 6dc0bb0c13b..00000000000 --- a/arch/xtensa/include/uapi/asm/bitsperlong.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/uapi/asm/errno.h b/arch/xtensa/include/uapi/asm/errno.h deleted file mode 100644 index a0f3b96b79b..00000000000 --- a/arch/xtensa/include/uapi/asm/errno.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/errno.h - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_ERRNO_H -#define _XTENSA_ERRNO_H - -#include - -#endif /* _XTENSA_ERRNO_H */ diff --git a/arch/xtensa/include/uapi/asm/fcntl.h b/arch/xtensa/include/uapi/asm/fcntl.h deleted file mode 100644 index 46ab12db573..00000000000 --- a/arch/xtensa/include/uapi/asm/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/uapi/asm/ioctl.h b/arch/xtensa/include/uapi/asm/ioctl.h deleted file mode 100644 index b279fe06dfe..00000000000 --- a/arch/xtensa/include/uapi/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/uapi/asm/kvm_para.h b/arch/xtensa/include/uapi/asm/kvm_para.h deleted file mode 100644 index 14fab8f0b95..00000000000 --- a/arch/xtensa/include/uapi/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/xtensa/include/uapi/asm/resource.h b/arch/xtensa/include/uapi/asm/resource.h deleted file mode 100644 index 17b5ab31177..00000000000 --- a/arch/xtensa/include/uapi/asm/resource.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/resource.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_RESOURCE_H -#define _XTENSA_RESOURCE_H - -#include - -#endif /* _XTENSA_RESOURCE_H */ diff --git a/arch/xtensa/include/uapi/asm/siginfo.h b/arch/xtensa/include/uapi/asm/siginfo.h deleted file mode 100644 index 6916248295d..00000000000 --- a/arch/xtensa/include/uapi/asm/siginfo.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-xtensa/siginfo.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_SIGINFO_H -#define _XTENSA_SIGINFO_H - -#include - -#endif /* _XTENSA_SIGINFO_H */ diff --git a/arch/xtensa/include/uapi/asm/statfs.h b/arch/xtensa/include/uapi/asm/statfs.h deleted file mode 100644 index 9c3d1a21313..00000000000 --- a/arch/xtensa/include/uapi/asm/statfs.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-xtensa/statfs.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_STATFS_H -#define _XTENSA_STATFS_H - -#include - -#endif /* _XTENSA_STATFS_H */ - diff --git a/arch/xtensa/include/uapi/asm/termios.h b/arch/xtensa/include/uapi/asm/termios.h deleted file mode 100644 index 32a770fe11e..00000000000 --- a/arch/xtensa/include/uapi/asm/termios.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * include/asm-xtensa/termios.h - * - * Copied from SH. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _UAPI_XTENSA_TERMIOS_H -#define _UAPI_XTENSA_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* Modem lines */ - -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - - -#endif /* _UAPI_XTENSA_TERMIOS_H */ -- cgit v1.2.3-70-g09d2 From a5f5af8698a5cb3a68608a40a8782bdf8263cb97 Mon Sep 17 00:00:00 2001 From: Martin Peres Date: Thu, 4 Oct 2012 00:28:21 +0200 Subject: drm/nouveau/hwmon: fix the initialization condition Signed-off-by: Martin Peres Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_pm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c index b9d5335df74..47677e3f8d7 100644 --- a/drivers/gpu/drm/nouveau/nouveau_pm.c +++ b/drivers/gpu/drm/nouveau/nouveau_pm.c @@ -706,8 +706,7 @@ nouveau_hwmon_init(struct drm_device *dev) struct device *hwmon_dev; int ret = 0; - if (!therm || !therm->temp_get || !therm->attr_get || - !therm->attr_set || therm->temp_get(therm) < 0) + if (!therm || !therm->temp_get || !therm->attr_get || !therm->attr_set) return -ENODEV; hwmon_dev = hwmon_device_register(&dev->pdev->dev); -- cgit v1.2.3-70-g09d2 From a6fd5cf3c986dab3950185a53ef02a399bf2cf2b Mon Sep 17 00:00:00 2001 From: Martin Peres Date: Thu, 4 Oct 2012 00:44:19 +0200 Subject: drm/nouveau/pm: fix a typo related to the move to the therm subdev Reported-by: Vekin on IRC Reported-by: Emil Velikov Signed-off-by: Martin Peres Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c index 47677e3f8d7..75314a1befc 100644 --- a/drivers/gpu/drm/nouveau/nouveau_pm.c +++ b/drivers/gpu/drm/nouveau/nouveau_pm.c @@ -52,7 +52,7 @@ nouveau_pm_perflvl_aux(struct drm_device *dev, struct nouveau_pm_level *perflvl, { struct nouveau_drm *drm = nouveau_drm(dev); struct nouveau_pm *pm = nouveau_pm(dev); - struct nouveau_therm *therm = nouveau_therm(drm); + struct nouveau_therm *therm = nouveau_therm(drm->device); int ret; /*XXX: not on all boards, we should control based on temperature -- cgit v1.2.3-70-g09d2 From eed6187d9f19535ac9339b684537f8535bf563b7 Mon Sep 17 00:00:00 2001 From: Martin Peres Date: Thu, 4 Oct 2012 01:00:13 +0200 Subject: drm/nouveau/pm: do not stop reclocking if failing to set the fan speed With the introduction of fan management modes, fan may not be drivable. We should allow reclocking nonetheless. This return was stupid to begin with since it may have left the card in an intermediate state (clocks corresponding to a perflvl and voltage corresponding to another one). The reclocking code will need to be rewritten in a near-future in order to provide a better error handling. Reported-by: Marcin Slusarz Signed-off-by: Martin Peres Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_pm.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c index 75314a1befc..112d0deeb6d 100644 --- a/drivers/gpu/drm/nouveau/nouveau_pm.c +++ b/drivers/gpu/drm/nouveau/nouveau_pm.c @@ -64,7 +64,6 @@ nouveau_pm_perflvl_aux(struct drm_device *dev, struct nouveau_pm_level *perflvl, ret = therm->fan_set(therm, perflvl->fanspeed); if (ret && ret != -ENODEV) { NV_ERROR(drm, "fanspeed set failed: %d\n", ret); - return ret; } } -- cgit v1.2.3-70-g09d2 From 5db4c6c5dd26f7737c1fa45ea73549b8aef6e395 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Thu, 11 Oct 2012 23:53:48 +0200 Subject: drm/nv50/fb: fix double free of vram mm nouveau_fb_destroy already calls nouveau_mm_fini on vram mm. Signed-off-by: Marcin Slusarz Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c b/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c index 436e9efe7ef..42d7539e652 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c +++ b/drivers/gpu/drm/nouveau/core/subdev/fb/nv50.c @@ -277,7 +277,6 @@ nv50_fb_dtor(struct nouveau_object *object) __free_page(priv->r100c08_page); } - nouveau_mm_fini(&priv->base.vram); nouveau_fb_destroy(&priv->base); } -- cgit v1.2.3-70-g09d2 From df1b4b91e5dae04782f65f657d771b23ca3bdc99 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Sun, 14 Oct 2012 01:58:26 +0400 Subject: drm/nouveau: only call ttm_agp_tt_create when __OS_HAS_AGP ttm_agp_tt_create is itself defined under CONFIG_AGP, so there's no point calling it otherwise. Signed-off-by: Max Filippov Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bo.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c index 259e5f1adf4..35ac57f0aab 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bo.c +++ b/drivers/gpu/drm/nouveau/nouveau_bo.c @@ -456,6 +456,7 @@ static struct ttm_tt * nouveau_ttm_tt_create(struct ttm_bo_device *bdev, unsigned long size, uint32_t page_flags, struct page *dummy_read) { +#if __OS_HAS_AGP struct nouveau_drm *drm = nouveau_bdev(bdev); struct drm_device *dev = drm->dev; @@ -463,6 +464,7 @@ nouveau_ttm_tt_create(struct ttm_bo_device *bdev, unsigned long size, return ttm_agp_tt_create(bdev, dev->agp->bridge, size, page_flags, dummy_read); } +#endif return nouveau_sgdma_create_ttm(bdev, size, page_flags, dummy_read); } -- cgit v1.2.3-70-g09d2 From 565f571c48f01a681243a356e9083f5cf24b432e Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 16 Oct 2012 16:25:08 +1000 Subject: drm/nouveau/bios: fix typo in error message Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c b/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c index 9ed6e728a94..7d750382a83 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/dcb.c @@ -43,7 +43,7 @@ dcb_table(struct nouveau_bios *bios, u8 *ver, u8 *hdr, u8 *cnt, u8 *len) *ver = nv_ro08(bios, dcb); if (*ver >= 0x41) { - nv_warn(bios, "DCB *ver 0x%02x unknown\n", *ver); + nv_warn(bios, "DCB version 0x%02x unknown\n", *ver); return 0x0000; } else if (*ver >= 0x30) { -- cgit v1.2.3-70-g09d2 From 8a00b6af4cc547725f231c8367ddc7cb56b2cf76 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 16 Oct 2012 16:40:53 +1000 Subject: nouveau: fix warning on 32-bit build. Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/core/subdev/therm/fan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/therm/fan.c b/drivers/gpu/drm/nouveau/core/subdev/therm/fan.c index b29237970fa..52317868518 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/therm/fan.c +++ b/drivers/gpu/drm/nouveau/core/subdev/therm/fan.c @@ -134,7 +134,7 @@ nouveau_therm_fan_sense(struct nouveau_therm *therm) end = ptimer->read(ptimer); if (cycles == 5) { - tach = (u64)60000000000; + tach = (u64)60000000000ULL; do_div(tach, (end - start)); return tach; } else -- cgit v1.2.3-70-g09d2 From c2fa3edc58a262dfcb7aea78e24661e90e00098c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 15 Oct 2012 23:24:55 -0700 Subject: usb: renesas_usbhs: fixup __usbhs_for_each_pipe 1st pos __usbhs_for_each_pipe() is the macro which moves around each pipe, but it has a bug which didn't care about 1st pipe's position. Because of this bug, it moves around pipe0, pipe2, pipe3 ... even though it requested pipe1, pipe2, pipe3... This patch modifies it. Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/pipe.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h index 08786c06dcf..3d80c7b1fd1 100644 --- a/drivers/usb/renesas_usbhs/pipe.h +++ b/drivers/usb/renesas_usbhs/pipe.h @@ -54,7 +54,7 @@ struct usbhs_pipe_info { * pipe list */ #define __usbhs_for_each_pipe(start, pos, info, i) \ - for (i = start, pos = (info)->pipe; \ + for (i = start, pos = (info)->pipe + i; \ i < (info)->size; \ i++, pos = (info)->pipe + i) -- cgit v1.2.3-70-g09d2 From d5c6a1e024dd5acd6ad2e1a6eb6a2fd5c15c50f1 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 11 Oct 2012 21:49:38 -0700 Subject: usb: renesas_usbhs: fixup interrupt status clear method When interrupt happened, renesas_usbhs driver gets irq status by usbhs_status_get_each_irq(), and cleared all status by using 0. But, this method is incorrect, since extra interrupt might occur between them. This patch cleared corresponding bits only Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/mod.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c index 35c5208f324..61933a90e5b 100644 --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -273,9 +273,9 @@ static irqreturn_t usbhs_interrupt(int irq, void *data) usbhs_write(priv, INTSTS0, ~irq_state.intsts0 & INTSTS0_MAGIC); usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC); - usbhs_write(priv, BRDYSTS, 0); - usbhs_write(priv, NRDYSTS, 0); - usbhs_write(priv, BEMPSTS, 0); + usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); + usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts); + usbhs_write(priv, BEMPSTS, ~irq_state.bempsts); /* * call irq callback functions -- cgit v1.2.3-70-g09d2 From 69da85edbab5cd42909d3ba65b3dad1c1fb40206 Mon Sep 17 00:00:00 2001 From: Alexandre Pereira da Silva Date: Mon, 15 Oct 2012 09:47:35 -0300 Subject: usb: gadget: lpc32xx_udc: Fix compatibility with STOTG04 The STOTG04 is an replacement for ISP1301. Most of the registers on STOTG04 are the same as on ISP1301, but the register ISP1301_I2C_OTG_CONTROL_2 (address 0x10) doesn't exist on the ST part. This is a work around for this by using the interrupt source register that should behave the same on both parts and has the needed information. Tested-by: Roland Stigge Signed-off-by: Alexandre Pereira da Silva Signed-off-by: Felipe Balbi --- drivers/usb/gadget/lpc32xx_udc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c index f696fb9b136..21a9861dabf 100644 --- a/drivers/usb/gadget/lpc32xx_udc.c +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -2930,10 +2930,10 @@ static void vbus_work(struct work_struct *work) /* Get the VBUS status from the transceiver */ value = i2c_smbus_read_byte_data(udc->isp1301_i2c_client, - ISP1301_I2C_OTG_CONTROL_2); + ISP1301_I2C_INTERRUPT_SOURCE); /* VBUS on or off? */ - if (value & OTG_B_SESS_VLD) + if (value & INT_SESS_VLD) udc->vbus = 1; else udc->vbus = 0; -- cgit v1.2.3-70-g09d2 From 1342798cc13e3b48d9b5738f0c8fa812ccea8101 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Thu, 13 Sep 2012 14:59:13 -0600 Subject: perf tool: Precise mode requires exclude_guest Summary of events per Peter: "Intel PEBS in VT-x context uses the DS address as a guest linear address, even though its programmed by the host as a host linear address. This either results in guest memory corruption and or the hardware faulting and 'crashing' the virtual machine. Therefore we have to disable PEBS on VT-x enter and re-enable on VT-x exit, enforcing a strict exclude_guest. AMB IBS does work but doesn't currently support exclude_* at all, setting an exclude_* bit will make it fail." This patch handles userspace perf command, setting the exclude_guest attribute if precise mode is requested, but only if a user has not specified a request for guest or host only profiling (G or H attribute). Kernel side AMD currently ignores all exclude_* bits, so there is no impact to existing IBS code paths. Robert Richter has a patch where IBS code will return EINVAL if an exclude_* bit is set. When this goes in it means use of :p on AMD with IBS will first fail with EINVAL (because exclude_guest will be set). Then the existing fallback code within perf will unset exclude_guest and try again. The second attempt will succeed if the CPU supports IBS profiling. Signed-off-by: David Ahern Acked-by: Peter Zijlstra Acked-by: Robert Richter Tested-by: Robert Richter Reviewed-by: Robert Richter Cc: Avi Kivity Cc: Gleb Natapov Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Robert Richter Link: http://lkml.kernel.org/r/1347569955-54626-2-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/parse-events.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index aed38e4b9df..75c7b0fca6d 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -690,6 +690,9 @@ static int get_event_modifier(struct event_modifier *mod, char *str, eH = 0; } else if (*str == 'p') { precise++; + /* use of precise requires exclude_guest */ + if (!exclude_GH) + eG = 1; } else break; -- cgit v1.2.3-70-g09d2 From 20b279ddb38ca42f8863cec07b4d45ec24589f13 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 13 Sep 2012 14:59:14 -0600 Subject: perf: Require exclude_guest to use PEBS - kernel side enforcement Intel PEBS in VT-x context uses the DS address as a guest linear address, even though its programmed by the host as a host linear address. This either results in guest memory corruption and or the hardware faulting and 'crashing' the virtual machine. Therefore we have to disable PEBS on VT-x enter and re-enable on VT-x exit, enforcing a strict exclude_guest. This patch enforces exclude_guest kernel side. Signed-off-by: Peter Zijlstra Cc: Avi Kivity Cc: David Ahern Cc: Gleb Natapov Cc: Ingo Molnar Cc: Robert Richter Link: http://lkml.kernel.org/r/1347569955-54626-3-git-send-email-dsahern@gmail.com Signed-off-by: David Ahern Signed-off-by: Arnaldo Carvalho de Melo --- arch/x86/kernel/cpu/perf_event.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 915b876edd1..3373f84d139 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -338,6 +338,9 @@ int x86_setup_perfctr(struct perf_event *event) /* BTS is currently only allowed for user-mode. */ if (!attr->exclude_kernel) return -EOPNOTSUPP; + + if (!attr->exclude_guest) + return -EOPNOTSUPP; } hwc->config |= config; @@ -380,6 +383,9 @@ int x86_pmu_hw_config(struct perf_event *event) if (event->attr.precise_ip) { int precise = 0; + if (!event->attr.exclude_guest) + return -EOPNOTSUPP; + /* Support for constant skid */ if (x86_pmu.pebs_active && !x86_pmu.pebs_broken) { precise++; -- cgit v1.2.3-70-g09d2 From 1f04661fde9deda4a2cd5845258715a22d8af197 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 16 Oct 2012 16:52:26 +0200 Subject: ALSA: hda - Stop LPIB delay counting on broken hardware If LPIB reports a pretty bad value, we can't trust such hardware for calculating the PCM delay. Automatically turn off the delay counting when such a problem is encountered. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=48911 Cc: [v3.6] Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index ecf277506ad..72b085ae7d4 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2158,9 +2158,12 @@ static unsigned int azx_get_position(struct azx *chip, if (delay < 0) delay += azx_dev->bufsize; if (delay >= azx_dev->period_bytes) { - snd_printdd("delay %d > period_bytes %d\n", - delay, azx_dev->period_bytes); - delay = 0; /* something is wrong */ + snd_printk(KERN_WARNING SFX + "Unstable LPIB (%d >= %d); " + "disabling LPIB delay counting\n", + delay, azx_dev->period_bytes); + delay = 0; + chip->driver_caps &= ~AZX_DCAPS_COUNT_LPIB_DELAY; } azx_dev->substream->runtime->delay = bytes_to_frames(azx_dev->substream->runtime, delay); -- cgit v1.2.3-70-g09d2 From ffe10c6f95412da01695e659e967747333d5e812 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 15 Oct 2012 12:39:42 +0900 Subject: perf tools: Fix segfault when using srcline sort key The srcline sort key is for grouping samples based on their source file and line number. It use addr2line tool to get the information but it requires dso name. It caused a segfault when a sample does not have the name by dereferencing a NULL pointer. Fix it by using raw ip addresses for those samples. Signed-off-by: Namhyung Kim Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1350272383-7016-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/sort.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c index b5b1b921196..dd68f115d39 100644 --- a/tools/perf/util/sort.c +++ b/tools/perf/util/sort.c @@ -260,6 +260,9 @@ static int hist_entry__srcline_snprintf(struct hist_entry *self, char *bf, if (path != NULL) goto out_path; + if (!self->ms.map) + goto out_ip; + snprintf(cmd, sizeof(cmd), "addr2line -e %s %016" PRIx64, self->ms.map->dso->long_name, self->ip); fp = popen(cmd, "r"); -- cgit v1.2.3-70-g09d2 From 88481b6b33d6cb5edb57e5794abae4daeabd08c5 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 15 Oct 2012 12:39:43 +0900 Subject: perf tools: Remove warnings on JIT samples for srcline sort key When using the srcline sort key with perf report, I see many lines of warning related to JIT samples like below: addr2line: '/tmp/perf-1397.map': No such file Since it's not a ELF binary and doesn't provide such information, just use the raw ip address. Signed-off-by: Namhyung Kim Cc: David Ahern Cc: Ingo Molnar Cc: Irina Tirdea Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1350272383-7016-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/sort.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c index dd68f115d39..cfd1c0feb32 100644 --- a/tools/perf/util/sort.c +++ b/tools/perf/util/sort.c @@ -263,6 +263,9 @@ static int hist_entry__srcline_snprintf(struct hist_entry *self, char *bf, if (!self->ms.map) goto out_ip; + if (!strncmp(self->ms.map->dso->long_name, "/tmp/perf-", 10)) + goto out_ip; + snprintf(cmd, sizeof(cmd), "addr2line -e %s %016" PRIx64, self->ms.map->dso->long_name, self->ip); fp = popen(cmd, "r"); -- cgit v1.2.3-70-g09d2 From 63a1a3d820c619a4dab1781cc16c110a284efded Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 15 Oct 2012 18:14:35 -0300 Subject: perf hists browser: Fix off-by-two bug on the first column The commit 5395a04841fc ("perf hists: Separate overhead and baseline columns") makes the "Overhead" column no more the first one. So it resulted in the mis-aligned column in the normal (non-diff) output. Signed-off-by: Namhyung Kim Reported-by: Markus Trippelsdorf Acked-by: Jiri Olsa Cc: Ingo Molnar Cc: Jiri Olsa Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/None Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/ui/browsers/hists.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c index 0568536ecf6..fe4430aed63 100644 --- a/tools/perf/ui/browsers/hists.c +++ b/tools/perf/ui/browsers/hists.c @@ -610,6 +610,7 @@ static int hist_browser__show_entry(struct hist_browser *browser, char folded_sign = ' '; bool current_entry = ui_browser__is_current_entry(&browser->b, row); off_t row_offset = entry->row_offset; + bool first = true; if (current_entry) { browser->he_selection = entry; @@ -633,10 +634,11 @@ static int hist_browser__show_entry(struct hist_browser *browser, if (!perf_hpp__format[i].cond) continue; - if (i) { + if (!first) { slsmg_printf(" "); width -= 2; } + first = false; if (perf_hpp__format[i].color) { hpp.ptr = &percent; -- cgit v1.2.3-70-g09d2 From 101782ea2c6984cf169631c59df76b8497899caf Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 1 Oct 2012 20:13:51 -0400 Subject: lib tools traceevent: Add back pevent assignment in __pevent_parse_format() Even though with the change of commit commit 2b29175 "tools lib traceevent: Carve out events format parsing routine", allowed __pevent_parse_format() to parse an event without the need of a pevent handler, the event still needs to assign the pevent handed to it. There's no problem with assigning it if the pevent is NULL, as the event->pevent would be NULL without the assignment. But function parsing handlers may be assigned to the pevent handler to help in parsing the event. If there's no pevent then there would not be any function handlers, but if the pevent isn't assigned first before parsing the event, it wont honor the function handlers that were assigned. Worse yet, the current code crashes if an event has a function that it tries to parse. For example: # perf record -e scsi:scsi_dispatch_cmd_timeout Segmentation fault (core dumped) This happens because the scsi_dispatch_cmd_timeout event format has the following: scsi_trace_parse_cdb(p, __get_dynamic_array(cmnd), REC->cmd_len) which hasn't been defined by the pevent code. Signed-off-by: Steven Rostedt Reviewed-by: Namhyung Kim Cc: Ingo Molnar Cc: Namhyung Kim Link: http://lkml.kernel.org/r/1349136831.22822.133.camel@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/traceevent/event-parse.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/tools/lib/traceevent/event-parse.c b/tools/lib/traceevent/event-parse.c index 47264b4652b..f2989c525e4 100644 --- a/tools/lib/traceevent/event-parse.c +++ b/tools/lib/traceevent/event-parse.c @@ -2602,6 +2602,9 @@ find_func_handler(struct pevent *pevent, char *func_name) { struct pevent_function_handler *func; + if (!pevent) + return NULL; + for (func = pevent->func_handlers; func; func = func->next) { if (strcmp(func->name, func_name) == 0) break; @@ -4938,6 +4941,9 @@ enum pevent_errno __pevent_parse_format(struct event_format **eventp, goto event_alloc_failed; } + /* Add pevent to event so that it can be referenced */ + event->pevent = pevent; + ret = event_read_format(event); if (ret < 0) { ret = PEVENT_ERRNO__READ_FORMAT_FAILED; @@ -5041,9 +5047,6 @@ enum pevent_errno pevent_parse_event(struct pevent *pevent, const char *buf, if (event == NULL) return ret; - /* Add pevent to event so that it can be referenced */ - event->pevent = pevent; - if (add_event(pevent, event)) { ret = PEVENT_ERRNO__MEM_ALLOC_FAILED; goto event_add_failed; -- cgit v1.2.3-70-g09d2 From 743df75ff10630f1f2a461f0f4b51f601f53ec44 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 1 Oct 2012 20:23:28 -0400 Subject: tools lib traceevent: Fix missed freeing of subargs in free_arg() in filter Some of args were missed in free_args(), as well as subargs. That is args like FILTER_ARG_NUM have left and right pointers to other args that also need to be freed. Signed-off-by: Steven Rostedt Cc: Ingo Molnar Cc: Namhyung Kim Link: http://lkml.kernel.org/r/1349137408.22822.135.camel@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/traceevent/parse-filter.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/tools/lib/traceevent/parse-filter.c b/tools/lib/traceevent/parse-filter.c index ad17855528f..5ea4326ad11 100644 --- a/tools/lib/traceevent/parse-filter.c +++ b/tools/lib/traceevent/parse-filter.c @@ -209,7 +209,16 @@ static void free_arg(struct filter_arg *arg) switch (arg->type) { case FILTER_ARG_NONE: case FILTER_ARG_BOOLEAN: + break; + case FILTER_ARG_NUM: + free_arg(arg->num.left); + free_arg(arg->num.right); + break; + + case FILTER_ARG_EXP: + free_arg(arg->exp.left); + free_arg(arg->exp.right); break; case FILTER_ARG_STR: @@ -218,6 +227,12 @@ static void free_arg(struct filter_arg *arg) free(arg->str.buffer); break; + case FILTER_ARG_VALUE: + if (arg->value.type == FILTER_STRING || + arg->value.type == FILTER_CHAR) + free(arg->value.str); + break; + case FILTER_ARG_OP: free_arg(arg->op.left); free_arg(arg->op.right); -- cgit v1.2.3-70-g09d2 From 086e47b6c959ee557e9adefe72b8800c62d0ac34 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Sat, 13 Oct 2012 09:25:58 +0100 Subject: arm64: Remove duplicate inclusion of mmu_context.h in smp.c asm/mmu_context.h was included twice. Signed-off-by: Sachin Kamat Signed-off-by: Catalin Marinas --- arch/arm64/kernel/smp.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index b711525be21..226b6bf6e9c 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -46,7 +46,6 @@ #include #include #include -#include /* * as from 2.5, kernels no longer have an init_tasks structure -- cgit v1.2.3-70-g09d2 From 916ca14aaf12a7191118adb51bb95e3c7866380d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Oct 2012 09:34:01 -0700 Subject: sparc64: Add global PMU register dumping via sysrq. Signed-off-by: David S. Miller --- Documentation/sysrq.txt | 1 + arch/sparc/include/asm/ptrace.h | 13 ++++- arch/sparc/include/asm/smp_64.h | 2 + arch/sparc/kernel/process_64.c | 120 +++++++++++++++++++++++++++++++++------- arch/sparc/kernel/smp_64.c | 11 ++++ arch/sparc/mm/ultra.S | 64 ++++++++++++++++++++- drivers/tty/sysrq.c | 1 + 7 files changed, 189 insertions(+), 23 deletions(-) diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt index 642f84495b2..2a4cdda4828 100644 --- a/Documentation/sysrq.txt +++ b/Documentation/sysrq.txt @@ -116,6 +116,7 @@ On all - write a character to /proc/sysrq-trigger. e.g.: 'w' - Dumps tasks that are in uninterruptable (blocked) state. 'x' - Used by xmon interface on ppc/powerpc platforms. + Show global PMU Registers on sparc64. 'y' - Show global CPU Registers [SPARC-64 specific] diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h index 0c6f6b06828..da43bdc6229 100644 --- a/arch/sparc/include/asm/ptrace.h +++ b/arch/sparc/include/asm/ptrace.h @@ -42,7 +42,18 @@ struct global_reg_snapshot { struct thread_info *thread; unsigned long pad1; }; -extern struct global_reg_snapshot global_reg_snapshot[NR_CPUS]; + +struct global_pmu_snapshot { + unsigned long pcr[4]; + unsigned long pic[4]; +}; + +union global_cpu_snapshot { + struct global_reg_snapshot reg; + struct global_pmu_snapshot pmu; +}; + +extern union global_cpu_snapshot global_cpu_snapshot[NR_CPUS]; #define force_successful_syscall_return() \ do { current_thread_info()->syscall_noerror = 1; \ diff --git a/arch/sparc/include/asm/smp_64.h b/arch/sparc/include/asm/smp_64.h index 29862a9e906..dd3bef4b989 100644 --- a/arch/sparc/include/asm/smp_64.h +++ b/arch/sparc/include/asm/smp_64.h @@ -48,6 +48,7 @@ extern void smp_fill_in_sib_core_maps(void); extern void cpu_play_dead(void); extern void smp_fetch_global_regs(void); +extern void smp_fetch_global_pmu(void); struct seq_file; void smp_bogo(struct seq_file *); @@ -65,6 +66,7 @@ extern void __cpu_die(unsigned int cpu); #define hard_smp_processor_id() 0 #define smp_fill_in_sib_core_maps() do { } while (0) #define smp_fetch_global_regs() do { } while (0) +#define smp_fetch_global_pmu() do { } while (0) #endif /* !(CONFIG_SMP) */ diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c index fcaa5942112..d778248ef3f 100644 --- a/arch/sparc/kernel/process_64.c +++ b/arch/sparc/kernel/process_64.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -47,6 +48,7 @@ #include #include #include +#include #include "kstack.h" @@ -204,18 +206,22 @@ void show_regs(struct pt_regs *regs) show_stack(current, (unsigned long *) regs->u_regs[UREG_FP]); } -struct global_reg_snapshot global_reg_snapshot[NR_CPUS]; -static DEFINE_SPINLOCK(global_reg_snapshot_lock); +union global_cpu_snapshot global_cpu_snapshot[NR_CPUS]; +static DEFINE_SPINLOCK(global_cpu_snapshot_lock); static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs, int this_cpu) { + struct global_reg_snapshot *rp; + flushw_all(); - global_reg_snapshot[this_cpu].tstate = regs->tstate; - global_reg_snapshot[this_cpu].tpc = regs->tpc; - global_reg_snapshot[this_cpu].tnpc = regs->tnpc; - global_reg_snapshot[this_cpu].o7 = regs->u_regs[UREG_I7]; + rp = &global_cpu_snapshot[this_cpu].reg; + + rp->tstate = regs->tstate; + rp->tpc = regs->tpc; + rp->tnpc = regs->tnpc; + rp->o7 = regs->u_regs[UREG_I7]; if (regs->tstate & TSTATE_PRIV) { struct reg_window *rw; @@ -223,17 +229,17 @@ static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs, rw = (struct reg_window *) (regs->u_regs[UREG_FP] + STACK_BIAS); if (kstack_valid(tp, (unsigned long) rw)) { - global_reg_snapshot[this_cpu].i7 = rw->ins[7]; + rp->i7 = rw->ins[7]; rw = (struct reg_window *) (rw->ins[6] + STACK_BIAS); if (kstack_valid(tp, (unsigned long) rw)) - global_reg_snapshot[this_cpu].rpc = rw->ins[7]; + rp->rpc = rw->ins[7]; } } else { - global_reg_snapshot[this_cpu].i7 = 0; - global_reg_snapshot[this_cpu].rpc = 0; + rp->i7 = 0; + rp->rpc = 0; } - global_reg_snapshot[this_cpu].thread = tp; + rp->thread = tp; } /* In order to avoid hangs we do not try to synchronize with the @@ -261,9 +267,9 @@ void arch_trigger_all_cpu_backtrace(void) if (!regs) regs = tp->kregs; - spin_lock_irqsave(&global_reg_snapshot_lock, flags); + spin_lock_irqsave(&global_cpu_snapshot_lock, flags); - memset(global_reg_snapshot, 0, sizeof(global_reg_snapshot)); + memset(global_cpu_snapshot, 0, sizeof(global_cpu_snapshot)); this_cpu = raw_smp_processor_id(); @@ -272,7 +278,7 @@ void arch_trigger_all_cpu_backtrace(void) smp_fetch_global_regs(); for_each_online_cpu(cpu) { - struct global_reg_snapshot *gp = &global_reg_snapshot[cpu]; + struct global_reg_snapshot *gp = &global_cpu_snapshot[cpu].reg; __global_reg_poll(gp); @@ -295,9 +301,9 @@ void arch_trigger_all_cpu_backtrace(void) } } - memset(global_reg_snapshot, 0, sizeof(global_reg_snapshot)); + memset(global_cpu_snapshot, 0, sizeof(global_cpu_snapshot)); - spin_unlock_irqrestore(&global_reg_snapshot_lock, flags); + spin_unlock_irqrestore(&global_cpu_snapshot_lock, flags); } #ifdef CONFIG_MAGIC_SYSRQ @@ -309,16 +315,90 @@ static void sysrq_handle_globreg(int key) static struct sysrq_key_op sparc_globalreg_op = { .handler = sysrq_handle_globreg, - .help_msg = "Globalregs", + .help_msg = "global-regs(Y)", .action_msg = "Show Global CPU Regs", }; -static int __init sparc_globreg_init(void) +static void __global_pmu_self(int this_cpu) +{ + struct global_pmu_snapshot *pp; + int i, num; + + pp = &global_cpu_snapshot[this_cpu].pmu; + + num = 1; + if (tlb_type == hypervisor && + sun4v_chip_type >= SUN4V_CHIP_NIAGARA4) + num = 4; + + for (i = 0; i < num; i++) { + pp->pcr[i] = pcr_ops->read_pcr(i); + pp->pic[i] = pcr_ops->read_pic(i); + } +} + +static void __global_pmu_poll(struct global_pmu_snapshot *pp) +{ + int limit = 0; + + while (!pp->pcr[0] && ++limit < 100) { + barrier(); + udelay(1); + } +} + +static void pmu_snapshot_all_cpus(void) { - return register_sysrq_key('y', &sparc_globalreg_op); + unsigned long flags; + int this_cpu, cpu; + + spin_lock_irqsave(&global_cpu_snapshot_lock, flags); + + memset(global_cpu_snapshot, 0, sizeof(global_cpu_snapshot)); + + this_cpu = raw_smp_processor_id(); + + __global_pmu_self(this_cpu); + + smp_fetch_global_pmu(); + + for_each_online_cpu(cpu) { + struct global_pmu_snapshot *pp = &global_cpu_snapshot[cpu].pmu; + + __global_pmu_poll(pp); + + printk("%c CPU[%3d]: PCR[%08lx:%08lx:%08lx:%08lx] PIC[%08lx:%08lx:%08lx:%08lx]\n", + (cpu == this_cpu ? '*' : ' '), cpu, + pp->pcr[0], pp->pcr[1], pp->pcr[2], pp->pcr[3], + pp->pic[0], pp->pic[1], pp->pic[2], pp->pic[3]); + } + + memset(global_cpu_snapshot, 0, sizeof(global_cpu_snapshot)); + + spin_unlock_irqrestore(&global_cpu_snapshot_lock, flags); +} + +static void sysrq_handle_globpmu(int key) +{ + pmu_snapshot_all_cpus(); +} + +static struct sysrq_key_op sparc_globalpmu_op = { + .handler = sysrq_handle_globpmu, + .help_msg = "global-pmu(X)", + .action_msg = "Show Global PMU Regs", +}; + +static int __init sparc_sysrq_init(void) +{ + int ret = register_sysrq_key('y', &sparc_globalreg_op); + + if (!ret) + ret = register_sysrq_key('x', &sparc_globalpmu_op); + return ret; } -core_initcall(sparc_globreg_init); +core_initcall(sparc_sysrq_init); #endif diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index 781bcb10b8b..d94b878577b 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -852,6 +852,8 @@ extern unsigned long xcall_flush_tlb_mm; extern unsigned long xcall_flush_tlb_pending; extern unsigned long xcall_flush_tlb_kernel_range; extern unsigned long xcall_fetch_glob_regs; +extern unsigned long xcall_fetch_glob_pmu; +extern unsigned long xcall_fetch_glob_pmu_n4; extern unsigned long xcall_receive_signal; extern unsigned long xcall_new_mmu_context_version; #ifdef CONFIG_KGDB @@ -1000,6 +1002,15 @@ void smp_fetch_global_regs(void) smp_cross_call(&xcall_fetch_glob_regs, 0, 0, 0); } +void smp_fetch_global_pmu(void) +{ + if (tlb_type == hypervisor && + sun4v_chip_type >= SUN4V_CHIP_NIAGARA4) + smp_cross_call(&xcall_fetch_glob_pmu_n4, 0, 0, 0); + else + smp_cross_call(&xcall_fetch_glob_pmu, 0, 0, 0); +} + /* We know that the window frames of the user have been flushed * to the stack before we get here because all callers of us * are flush_tlb_*() routines, and these run after flush_cache_*() diff --git a/arch/sparc/mm/ultra.S b/arch/sparc/mm/ultra.S index 874162a11ce..f8e13d421fc 100644 --- a/arch/sparc/mm/ultra.S +++ b/arch/sparc/mm/ultra.S @@ -481,8 +481,8 @@ xcall_sync_tick: .globl xcall_fetch_glob_regs xcall_fetch_glob_regs: - sethi %hi(global_reg_snapshot), %g1 - or %g1, %lo(global_reg_snapshot), %g1 + sethi %hi(global_cpu_snapshot), %g1 + or %g1, %lo(global_cpu_snapshot), %g1 __GET_CPUID(%g2) sllx %g2, 6, %g3 add %g1, %g3, %g1 @@ -509,6 +509,66 @@ xcall_fetch_glob_regs: stx %g3, [%g1 + GR_SNAP_THREAD] retry + .globl xcall_fetch_glob_pmu +xcall_fetch_glob_pmu: + sethi %hi(global_cpu_snapshot), %g1 + or %g1, %lo(global_cpu_snapshot), %g1 + __GET_CPUID(%g2) + sllx %g2, 6, %g3 + add %g1, %g3, %g1 + rd %pic, %g7 + stx %g7, [%g1 + (4 * 8)] + rd %pcr, %g7 + stx %g7, [%g1 + (0 * 8)] + retry + + .globl xcall_fetch_glob_pmu_n4 +xcall_fetch_glob_pmu_n4: + sethi %hi(global_cpu_snapshot), %g1 + or %g1, %lo(global_cpu_snapshot), %g1 + __GET_CPUID(%g2) + sllx %g2, 6, %g3 + add %g1, %g3, %g1 + + ldxa [%g0] ASI_PIC, %g7 + stx %g7, [%g1 + (4 * 8)] + mov 0x08, %g3 + ldxa [%g3] ASI_PIC, %g7 + stx %g7, [%g1 + (5 * 8)] + mov 0x10, %g3 + ldxa [%g3] ASI_PIC, %g7 + stx %g7, [%g1 + (6 * 8)] + mov 0x18, %g3 + ldxa [%g3] ASI_PIC, %g7 + stx %g7, [%g1 + (7 * 8)] + + mov %o0, %g2 + mov %o1, %g3 + mov %o5, %g7 + + mov HV_FAST_VT_GET_PERFREG, %o5 + mov 3, %o0 + ta HV_FAST_TRAP + stx %o1, [%g1 + (3 * 8)] + mov HV_FAST_VT_GET_PERFREG, %o5 + mov 2, %o0 + ta HV_FAST_TRAP + stx %o1, [%g1 + (2 * 8)] + mov HV_FAST_VT_GET_PERFREG, %o5 + mov 1, %o0 + ta HV_FAST_TRAP + stx %o1, [%g1 + (1 * 8)] + mov HV_FAST_VT_GET_PERFREG, %o5 + mov 0, %o0 + ta HV_FAST_TRAP + stx %o1, [%g1 + (0 * 8)] + + mov %g2, %o0 + mov %g3, %o1 + mov %g7, %o5 + + retry + #ifdef DCACHE_ALIASING_POSSIBLE .align 32 .globl xcall_flush_dcache_page_cheetah diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index 05728894a88..16ee6cee07d 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -452,6 +452,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = { NULL, /* v */ &sysrq_showstate_blocked_op, /* w */ /* x: May be registered on ppc/powerpc for xmon */ + /* x: May be registered on sparc64 for global PMU dump */ NULL, /* x */ /* y: May be registered on sparc64 for global register dump */ NULL, /* y */ -- cgit v1.2.3-70-g09d2 From 7bdce71822f471433dd3014692e9096996c7b5f0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Oct 2012 18:20:52 +0200 Subject: USB: ark3116: fix NULL-pointer dereference Fix NULL-pointer dereference at release by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is NULL when release is called. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ark3116.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index cf2522c397d..bd50a8a41a0 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -125,9 +125,6 @@ static inline int calc_divisor(int bps) static int ark3116_attach(struct usb_serial *serial) { - struct usb_serial_port *port = serial->port[0]; - struct ark3116_private *priv; - /* make sure we have our end-points */ if ((serial->num_bulk_in == 0) || (serial->num_bulk_out == 0) || @@ -142,8 +139,15 @@ static int ark3116_attach(struct usb_serial *serial) return -EINVAL; } - priv = kzalloc(sizeof(struct ark3116_private), - GFP_KERNEL); + return 0; +} + +static int ark3116_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct ark3116_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -198,18 +202,15 @@ static int ark3116_attach(struct usb_serial *serial) return 0; } -static void ark3116_release(struct usb_serial *serial) +static int ark3116_port_remove(struct usb_serial_port *port) { - struct usb_serial_port *port = serial->port[0]; struct ark3116_private *priv = usb_get_serial_port_data(port); /* device is closed, so URBs and DMA should be down */ - - usb_set_serial_port_data(port, NULL); - mutex_destroy(&priv->hw_lock); - kfree(priv); + + return 0; } static void ark3116_init_termios(struct tty_struct *tty) @@ -723,7 +724,8 @@ static struct usb_serial_driver ark3116_device = { .id_table = id_table, .num_ports = 1, .attach = ark3116_attach, - .release = ark3116_release, + .port_probe = ark3116_port_probe, + .port_remove = ark3116_port_remove, .set_termios = ark3116_set_termios, .init_termios = ark3116_init_termios, .ioctl = ark3116_ioctl, -- cgit v1.2.3-70-g09d2 From a9556040119a63d06fd5238d47f5b683fba4178b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Oct 2012 18:20:54 +0200 Subject: USB: cyberjack: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cyberjack.c | 49 ++++++++++++++++-------------------------- 1 file changed, 19 insertions(+), 30 deletions(-) diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 2a7aecc7223..4ee77dcbe69 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -55,9 +55,9 @@ #define CYBERJACK_PRODUCT_ID 0x0100 /* Function prototypes */ -static int cyberjack_startup(struct usb_serial *serial); static void cyberjack_disconnect(struct usb_serial *serial); -static void cyberjack_release(struct usb_serial *serial); +static int cyberjack_port_probe(struct usb_serial_port *port); +static int cyberjack_port_remove(struct usb_serial_port *port); static int cyberjack_open(struct tty_struct *tty, struct usb_serial_port *port); static void cyberjack_close(struct usb_serial_port *port); @@ -83,9 +83,9 @@ static struct usb_serial_driver cyberjack_device = { .description = "Reiner SCT Cyberjack USB card reader", .id_table = id_table, .num_ports = 1, - .attach = cyberjack_startup, .disconnect = cyberjack_disconnect, - .release = cyberjack_release, + .port_probe = cyberjack_port_probe, + .port_remove = cyberjack_port_remove, .open = cyberjack_open, .close = cyberjack_close, .write = cyberjack_write, @@ -107,56 +107,45 @@ struct cyberjack_private { short wrsent; /* Data already sent */ }; -/* do some startup allocations not currently performed by usb_serial_probe() */ -static int cyberjack_startup(struct usb_serial *serial) +static int cyberjack_port_probe(struct usb_serial_port *port) { struct cyberjack_private *priv; - int i; + int result; - /* allocate the private data structure */ priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL); if (!priv) return -ENOMEM; - /* set initial values */ spin_lock_init(&priv->lock); priv->rdtodo = 0; priv->wrfilled = 0; priv->wrsent = 0; - usb_set_serial_port_data(serial->port[0], priv); - init_waitqueue_head(&serial->port[0]->write_wait); + usb_set_serial_port_data(port, priv); - for (i = 0; i < serial->num_ports; ++i) { - int result; - result = usb_submit_urb(serial->port[i]->interrupt_in_urb, - GFP_KERNEL); - if (result) - dev_err(&serial->dev->dev, - "usb_submit_urb(read int) failed\n"); - dev_dbg(&serial->dev->dev, "%s - usb_submit_urb(int urb)\n", - __func__); - } + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) + dev_err(&port->dev, "usb_submit_urb(read int) failed\n"); return 0; } -static void cyberjack_disconnect(struct usb_serial *serial) +static int cyberjack_port_remove(struct usb_serial_port *port) { - int i; + struct cyberjack_private *priv; - for (i = 0; i < serial->num_ports; ++i) - usb_kill_urb(serial->port[i]->interrupt_in_urb); + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } -static void cyberjack_release(struct usb_serial *serial) +static void cyberjack_disconnect(struct usb_serial *serial) { int i; - for (i = 0; i < serial->num_ports; ++i) { - /* My special items, the standard routines free my urbs */ - kfree(usb_get_serial_port_data(serial->port[i])); - } + for (i = 0; i < serial->num_ports; ++i) + usb_kill_urb(serial->port[i]->interrupt_in_urb); } static int cyberjack_open(struct tty_struct *tty, -- cgit v1.2.3-70-g09d2 From fa919751a2d26a88140fc5810124dd81644efe51 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Oct 2012 18:20:53 +0200 Subject: USB: belkin_sa: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/belkin_sa.c | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index 99449424193..ea29556f0d7 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -45,8 +45,8 @@ #define DRIVER_DESC "USB Belkin Serial converter driver" /* function prototypes for a Belkin USB Serial Adapter F5U103 */ -static int belkin_sa_startup(struct usb_serial *serial); -static void belkin_sa_release(struct usb_serial *serial); +static int belkin_sa_port_probe(struct usb_serial_port *port); +static int belkin_sa_port_remove(struct usb_serial_port *port); static int belkin_sa_open(struct tty_struct *tty, struct usb_serial_port *port); static void belkin_sa_close(struct usb_serial_port *port); @@ -88,8 +88,8 @@ static struct usb_serial_driver belkin_device = { .break_ctl = belkin_sa_break_ctl, .tiocmget = belkin_sa_tiocmget, .tiocmset = belkin_sa_tiocmset, - .attach = belkin_sa_startup, - .release = belkin_sa_release, + .port_probe = belkin_sa_port_probe, + .port_remove = belkin_sa_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -118,17 +118,15 @@ struct belkin_sa_private { (c), BELKIN_SA_SET_REQUEST_TYPE, \ (v), 0, NULL, 0, WDR_TIMEOUT) -/* do some startup allocations not currently performed by usb_serial_probe() */ -static int belkin_sa_startup(struct usb_serial *serial) +static int belkin_sa_port_probe(struct usb_serial_port *port) { - struct usb_device *dev = serial->dev; + struct usb_device *dev = port->serial->dev; struct belkin_sa_private *priv; - /* allocate the private data structure */ priv = kmalloc(sizeof(struct belkin_sa_private), GFP_KERNEL); if (!priv) - return -1; /* error */ - /* set initial values for control structures */ + return -ENOMEM; + spin_lock_init(&priv->lock); priv->control_state = 0; priv->last_lsr = 0; @@ -140,18 +138,19 @@ static int belkin_sa_startup(struct usb_serial *serial) le16_to_cpu(dev->descriptor.bcdDevice), priv->bad_flow_control); - init_waitqueue_head(&serial->port[0]->write_wait); - usb_set_serial_port_data(serial->port[0], priv); + usb_set_serial_port_data(port, priv); return 0; } -static void belkin_sa_release(struct usb_serial *serial) +static int belkin_sa_port_remove(struct usb_serial_port *port) { - int i; + struct belkin_sa_private *priv; - for (i = 0; i < serial->num_ports; ++i) - kfree(usb_get_serial_port_data(serial->port[i])); + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } static int belkin_sa_open(struct tty_struct *tty, -- cgit v1.2.3-70-g09d2 From 4295fe7791a1b20c90cbaaa6f23f2fb94218b8a7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Oct 2012 15:47:20 +0200 Subject: USB: cp210x: fix port-data memory leak Fix port data memory leak by replacing port private data with serial private data. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release. The private data is used to store the control interface number, but as this is the same for all ports on an interface it should be stored as usb-serial data anyway. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 40 +++++++++++++++++----------------------- 1 file changed, 17 insertions(+), 23 deletions(-) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 28af5acc336..eb033fc92a1 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -162,7 +162,7 @@ static const struct usb_device_id id_table[] = { MODULE_DEVICE_TABLE(usb, id_table); -struct cp210x_port_private { +struct cp210x_serial_private { __u8 bInterfaceNumber; }; @@ -276,7 +276,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; - struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + struct cp210x_serial_private *spriv = usb_get_serial_data(serial); __le32 *buf; int result, i, length; @@ -292,7 +292,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), request, REQTYPE_INTERFACE_TO_HOST, 0x0000, - port_priv->bInterfaceNumber, buf, size, + spriv->bInterfaceNumber, buf, size, USB_CTRL_GET_TIMEOUT); /* Convert data into an array of integers */ @@ -323,7 +323,7 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; - struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); + struct cp210x_serial_private *spriv = usb_get_serial_data(serial); __le32 *buf; int result, i, length; @@ -345,13 +345,13 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), request, REQTYPE_HOST_TO_INTERFACE, 0x0000, - port_priv->bInterfaceNumber, buf, size, + spriv->bInterfaceNumber, buf, size, USB_CTRL_SET_TIMEOUT); } else { result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), request, REQTYPE_HOST_TO_INTERFACE, data[0], - port_priv->bInterfaceNumber, NULL, 0, + spriv->bInterfaceNumber, NULL, 0, USB_CTRL_SET_TIMEOUT); } @@ -845,36 +845,30 @@ static void cp210x_break_ctl (struct tty_struct *tty, int break_state) static int cp210x_startup(struct usb_serial *serial) { - struct cp210x_port_private *port_priv; - int i; + struct usb_host_interface *cur_altsetting; + struct cp210x_serial_private *spriv; /* cp210x buffers behave strangely unless device is reset */ usb_reset_device(serial->dev); - for (i = 0; i < serial->num_ports; i++) { - port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL); - if (!port_priv) - return -ENOMEM; + spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); + if (!spriv) + return -ENOMEM; - port_priv->bInterfaceNumber = - serial->interface->cur_altsetting->desc.bInterfaceNumber; + cur_altsetting = serial->interface->cur_altsetting; + spriv->bInterfaceNumber = cur_altsetting->desc.bInterfaceNumber; - usb_set_serial_port_data(serial->port[i], port_priv); - } + usb_set_serial_data(serial, spriv); return 0; } static void cp210x_release(struct usb_serial *serial) { - struct cp210x_port_private *port_priv; - int i; + struct cp210x_serial_private *spriv; - for (i = 0; i < serial->num_ports; i++) { - port_priv = usb_get_serial_port_data(serial->port[i]); - kfree(port_priv); - usb_set_serial_port_data(serial->port[i], NULL); - } + spriv = usb_get_serial_data(serial); + kfree(spriv); } module_usb_serial_driver(serial_drivers, id_table); -- cgit v1.2.3-70-g09d2 From 8bf769eb5f6efc33f95088850f33fcc05d28b508 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 15 Oct 2012 15:47:21 +0200 Subject: USB: pl2303: fix port-data memory leak Fix port-data memory leak by allocating and freeing port data in port_probe/remove rather than in attach/release, and by introducing serial private data to store the device type which is interface rather than port specific. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/pl2303.c | 90 +++++++++++++++++++++++++++------------------ 1 file changed, 54 insertions(+), 36 deletions(-) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 892ebdc7a36..60024190136 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -133,12 +133,15 @@ enum pl2303_type { HX, /* HX version of the pl2303 chip */ }; +struct pl2303_serial_private { + enum pl2303_type type; +}; + struct pl2303_private { spinlock_t lock; wait_queue_head_t delta_msr_wait; u8 line_control; u8 line_status; - enum pl2303_type type; }; static int pl2303_vendor_read(__u16 value, __u16 index, @@ -167,14 +170,19 @@ static int pl2303_vendor_write(__u16 value, __u16 index, static int pl2303_startup(struct usb_serial *serial) { - struct pl2303_private *priv; + struct pl2303_serial_private *spriv; enum pl2303_type type = type_0; unsigned char *buf; - int i; + + spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); + if (!spriv) + return -ENOMEM; buf = kmalloc(10, GFP_KERNEL); - if (buf == NULL) + if (!buf) { + kfree(spriv); return -ENOMEM; + } if (serial->dev->descriptor.bDeviceClass == 0x02) type = type_0; @@ -186,15 +194,8 @@ static int pl2303_startup(struct usb_serial *serial) type = type_1; dev_dbg(&serial->interface->dev, "device type: %d\n", type); - for (i = 0; i < serial->num_ports; ++i) { - priv = kzalloc(sizeof(struct pl2303_private), GFP_KERNEL); - if (!priv) - goto cleanup; - spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->delta_msr_wait); - priv->type = type; - usb_set_serial_port_data(serial->port[i], priv); - } + spriv->type = type; + usb_set_serial_data(serial, spriv); pl2303_vendor_read(0x8484, 0, serial, buf); pl2303_vendor_write(0x0404, 0, serial); @@ -213,15 +214,40 @@ static int pl2303_startup(struct usb_serial *serial) kfree(buf); return 0; +} -cleanup: - kfree(buf); - for (--i; i >= 0; --i) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - usb_set_serial_port_data(serial->port[i], NULL); - } - return -ENOMEM; +static void pl2303_release(struct usb_serial *serial) +{ + struct pl2303_serial_private *spriv; + + spriv = usb_get_serial_data(serial); + kfree(spriv); +} + +static int pl2303_port_probe(struct usb_serial_port *port) +{ + struct pl2303_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->delta_msr_wait); + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int pl2303_port_remove(struct usb_serial_port *port) +{ + struct pl2303_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } static int set_control_lines(struct usb_device *dev, u8 value) @@ -240,6 +266,7 @@ static void pl2303_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); struct pl2303_private *priv = usb_get_serial_port_data(port); unsigned long flags; unsigned int cflag; @@ -323,7 +350,7 @@ static void pl2303_set_termios(struct tty_struct *tty, } if (baud > 1228800) { /* type_0, type_1 only support up to 1228800 baud */ - if (priv->type != HX) + if (spriv->type != HX) baud = 1228800; else if (baud > 6000000) baud = 6000000; @@ -426,7 +453,7 @@ static void pl2303_set_termios(struct tty_struct *tty, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]); if (cflag & CRTSCTS) { - if (priv->type == HX) + if (spriv->type == HX) pl2303_vendor_write(0x0, 0x61, serial); else pl2303_vendor_write(0x0, 0x41, serial); @@ -468,10 +495,10 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) { struct ktermios tmp_termios; struct usb_serial *serial = port->serial; - struct pl2303_private *priv = usb_get_serial_port_data(port); + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); int result; - if (priv->type != HX) { + if (spriv->type != HX) { usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); } else { @@ -655,17 +682,6 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state) dev_err(&port->dev, "error sending break = %d\n", result); } -static void pl2303_release(struct usb_serial *serial) -{ - int i; - struct pl2303_private *priv; - - for (i = 0; i < serial->num_ports; ++i) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - } -} - static void pl2303_update_line_status(struct usb_serial_port *port, unsigned char *data, unsigned int actual_length) @@ -827,6 +843,8 @@ static struct usb_serial_driver pl2303_device = { .read_int_callback = pl2303_read_int_callback, .attach = pl2303_startup, .release = pl2303_release, + .port_probe = pl2303_port_probe, + .port_remove = pl2303_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { -- cgit v1.2.3-70-g09d2 From db5c8b524444d4fc6b1f32d368a50a3729e50002 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 10 Oct 2012 14:10:21 -0400 Subject: USB: fix port probing and removal in garmin_gps This patch (as1615) fixes a bug in the Garmin USB serial driver. It uses attach, disconnect, and release routines to carry out actions that should be handled by port_probe and port_remove routines, because they access port-specific data. The bug causes an oops when the device in unplugged, because the private data for each port structure now gets erased when the port is unbound from the driver, resulting in a null-pointer dereference. Signed-off-by: Alan Stern Reported--by: Markus Schauler Tested-by: Markus Schauler Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/garmin_gps.c | 24 +++++++----------------- 1 file changed, 7 insertions(+), 17 deletions(-) diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 3ee92648c02..203358d7e7b 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1405,11 +1405,10 @@ static void timeout_handler(unsigned long data) -static int garmin_attach(struct usb_serial *serial) +static int garmin_port_probe(struct usb_serial_port *port) { - int status = 0; - struct usb_serial_port *port = serial->port[0]; - struct garmin_data *garmin_data_p = NULL; + int status; + struct garmin_data *garmin_data_p; garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL); if (garmin_data_p == NULL) { @@ -1434,22 +1433,14 @@ static int garmin_attach(struct usb_serial *serial) } -static void garmin_disconnect(struct usb_serial *serial) +static int garmin_port_remove(struct usb_serial_port *port) { - struct usb_serial_port *port = serial->port[0]; struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); usb_kill_urb(port->interrupt_in_urb); del_timer_sync(&garmin_data_p->timer); -} - - -static void garmin_release(struct usb_serial *serial) -{ - struct usb_serial_port *port = serial->port[0]; - struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); - kfree(garmin_data_p); + return 0; } @@ -1466,9 +1457,8 @@ static struct usb_serial_driver garmin_device = { .close = garmin_close, .throttle = garmin_throttle, .unthrottle = garmin_unthrottle, - .attach = garmin_attach, - .disconnect = garmin_disconnect, - .release = garmin_release, + .port_probe = garmin_port_probe, + .port_remove = garmin_port_remove, .write = garmin_write, .write_room = garmin_write_room, .write_bulk_callback = garmin_write_bulk_callback, -- cgit v1.2.3-70-g09d2 From 45525b26a46cd593cb72070304c4cd7c8391bd37 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 16 Oct 2012 13:30:07 -0400 Subject: fix a leak in replace_fd() users replace_fd() began with "eats a reference, tries to insert into descriptor table" semantics; at some point I'd switched it to much saner current behaviour ("try to insert into descriptor table, grabbing a new reference if inserted; caller should do fput() in any case"), but forgot to update the callers. Mea culpa... [Spotted by Pavel Roskin, who has really weird system with pipe-fed coredumps as part of what he considers a normal boot ;-)] Signed-off-by: Al Viro --- fs/coredump.c | 5 +++-- security/selinux/hooks.c | 18 +++++++----------- 2 files changed, 10 insertions(+), 13 deletions(-) diff --git a/fs/coredump.c b/fs/coredump.c index fd37facac8d..ce47379bfa6 100644 --- a/fs/coredump.c +++ b/fs/coredump.c @@ -450,11 +450,12 @@ static int umh_pipe_setup(struct subprocess_info *info, struct cred *new) cp->file = files[1]; - replace_fd(0, files[0], 0); + err = replace_fd(0, files[0], 0); + fput(files[0]); /* and disallow core files too */ current->signal->rlim[RLIMIT_CORE] = (struct rlimit){1, 1}; - return 0; + return err; } void do_coredump(siginfo_t *siginfo, struct pt_regs *regs) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 24ab4148547..61a53367d02 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2132,18 +2132,14 @@ static inline void flush_unauthorized_files(const struct cred *cred, return; devnull = dentry_open(&selinux_null, O_RDWR, cred); - if (!IS_ERR(devnull)) { - /* replace all the matching ones with this */ - do { - replace_fd(n - 1, get_file(devnull), 0); - } while ((n = iterate_fd(files, n, match_file, cred)) != 0); + if (IS_ERR(devnull)) + devnull = NULL; + /* replace all the matching ones with this */ + do { + replace_fd(n - 1, devnull, 0); + } while ((n = iterate_fd(files, n, match_file, cred)) != 0); + if (devnull) fput(devnull); - } else { - /* just close all the matching ones */ - do { - replace_fd(n - 1, NULL, 0); - } while ((n = iterate_fd(files, n, match_file, cred)) != 0); - } } /* -- cgit v1.2.3-70-g09d2 From bbc1096ad8e9875a025bbcf012605da49129e8b8 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 15 Oct 2012 16:40:35 +0100 Subject: Unexport some bits of linux/fs.h There are some bits of linux/fs.h which are only used within the kernel and shouldn't be in the UAPI. Move these from uapi/linux/fs.h into linux/fs.h. Signed-off-by: David Howells Signed-off-by: Al Viro --- include/linux/fs.h | 130 +++++++++++++++++++++++++++++++++++++++++++++++ include/uapi/linux/fs.h | 132 ------------------------------------------------ 2 files changed, 130 insertions(+), 132 deletions(-) diff --git a/include/linux/fs.h b/include/linux/fs.h index 001c7cff2d4..8b53931b5a7 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -64,6 +64,77 @@ typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset, ssize_t bytes, void *private, int ret, bool is_async); +#define MAY_EXEC 0x00000001 +#define MAY_WRITE 0x00000002 +#define MAY_READ 0x00000004 +#define MAY_APPEND 0x00000008 +#define MAY_ACCESS 0x00000010 +#define MAY_OPEN 0x00000020 +#define MAY_CHDIR 0x00000040 +/* called from RCU mode, don't block */ +#define MAY_NOT_BLOCK 0x00000080 + +/* + * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond + * to O_WRONLY and O_RDWR via the strange trick in __dentry_open() + */ + +/* file is open for reading */ +#define FMODE_READ ((__force fmode_t)0x1) +/* file is open for writing */ +#define FMODE_WRITE ((__force fmode_t)0x2) +/* file is seekable */ +#define FMODE_LSEEK ((__force fmode_t)0x4) +/* file can be accessed using pread */ +#define FMODE_PREAD ((__force fmode_t)0x8) +/* file can be accessed using pwrite */ +#define FMODE_PWRITE ((__force fmode_t)0x10) +/* File is opened for execution with sys_execve / sys_uselib */ +#define FMODE_EXEC ((__force fmode_t)0x20) +/* File is opened with O_NDELAY (only set for block devices) */ +#define FMODE_NDELAY ((__force fmode_t)0x40) +/* File is opened with O_EXCL (only set for block devices) */ +#define FMODE_EXCL ((__force fmode_t)0x80) +/* File is opened using open(.., 3, ..) and is writeable only for ioctls + (specialy hack for floppy.c) */ +#define FMODE_WRITE_IOCTL ((__force fmode_t)0x100) +/* 32bit hashes as llseek() offset (for directories) */ +#define FMODE_32BITHASH ((__force fmode_t)0x200) +/* 64bit hashes as llseek() offset (for directories) */ +#define FMODE_64BITHASH ((__force fmode_t)0x400) + +/* + * Don't update ctime and mtime. + * + * Currently a special hack for the XFS open_by_handle ioctl, but we'll + * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon. + */ +#define FMODE_NOCMTIME ((__force fmode_t)0x800) + +/* Expect random access pattern */ +#define FMODE_RANDOM ((__force fmode_t)0x1000) + +/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */ +#define FMODE_UNSIGNED_OFFSET ((__force fmode_t)0x2000) + +/* File is opened with O_PATH; almost nothing can be done with it */ +#define FMODE_PATH ((__force fmode_t)0x4000) + +/* File was opened by fanotify and shouldn't generate fanotify events */ +#define FMODE_NONOTIFY ((__force fmode_t)0x1000000) + +/* + * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector + * that indicates that they should check the contents of the iovec are + * valid, but not check the memory that the iovec elements + * points too. + */ +#define CHECK_IOVEC_ONLY -1 + +#define SEL_IN 1 +#define SEL_OUT 2 +#define SEL_EX 4 + /* * The below are the various read and write types that we support. Some of * them include behavioral modifiers that send information down to the @@ -1556,6 +1627,60 @@ struct super_operations { void (*free_cached_objects)(struct super_block *, int); }; +/* + * Inode flags - they have no relation to superblock flags now + */ +#define S_SYNC 1 /* Writes are synced at once */ +#define S_NOATIME 2 /* Do not update access times */ +#define S_APPEND 4 /* Append-only file */ +#define S_IMMUTABLE 8 /* Immutable file */ +#define S_DEAD 16 /* removed, but still open directory */ +#define S_NOQUOTA 32 /* Inode is not counted to quota */ +#define S_DIRSYNC 64 /* Directory modifications are synchronous */ +#define S_NOCMTIME 128 /* Do not update file c/mtime */ +#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */ +#define S_PRIVATE 512 /* Inode is fs-internal */ +#define S_IMA 1024 /* Inode has an associated IMA struct */ +#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */ +#define S_NOSEC 4096 /* no suid or xattr security attributes */ + +/* + * Note that nosuid etc flags are inode-specific: setting some file-system + * flags just means all the inodes inherit those flags by default. It might be + * possible to override it selectively if you really wanted to with some + * ioctl() that is not currently implemented. + * + * Exception: MS_RDONLY is always applied to the entire file system. + * + * Unfortunately, it is possible to change a filesystems flags with it mounted + * with files in use. This means that all of the inodes will not have their + * i_flags updated. Hence, i_flags no longer inherit the superblock mount + * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org + */ +#define __IS_FLG(inode, flg) ((inode)->i_sb->s_flags & (flg)) + +#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY) +#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \ + ((inode)->i_flags & S_SYNC)) +#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \ + ((inode)->i_flags & (S_SYNC|S_DIRSYNC))) +#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK) +#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME) +#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION) + +#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA) +#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND) +#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE) +#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL) + +#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD) +#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME) +#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE) +#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE) +#define IS_IMA(inode) ((inode)->i_flags & S_IMA) +#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT) +#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC) + /* * Inode state bits. Protected by inode->i_lock * @@ -1688,6 +1813,11 @@ int sync_inode_metadata(struct inode *inode, int wait); struct file_system_type { const char *name; int fs_flags; +#define FS_REQUIRES_DEV 1 +#define FS_BINARY_MOUNTDATA 2 +#define FS_HAS_SUBTYPE 4 +#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */ +#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move() during rename() internally. */ struct dentry *(*mount) (struct file_system_type *, int, const char *, void *); void (*kill_sb) (struct super_block *); diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index 9fcc880d4be..780d4c6093e 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -57,85 +57,6 @@ struct inodes_stat_t { #define NR_FILE 8192 /* this can well be larger on a larger system */ -#define MAY_EXEC 0x00000001 -#define MAY_WRITE 0x00000002 -#define MAY_READ 0x00000004 -#define MAY_APPEND 0x00000008 -#define MAY_ACCESS 0x00000010 -#define MAY_OPEN 0x00000020 -#define MAY_CHDIR 0x00000040 -/* called from RCU mode, don't block */ -#define MAY_NOT_BLOCK 0x00000080 - -/* - * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond - * to O_WRONLY and O_RDWR via the strange trick in __dentry_open() - */ - -/* file is open for reading */ -#define FMODE_READ ((__force fmode_t)0x1) -/* file is open for writing */ -#define FMODE_WRITE ((__force fmode_t)0x2) -/* file is seekable */ -#define FMODE_LSEEK ((__force fmode_t)0x4) -/* file can be accessed using pread */ -#define FMODE_PREAD ((__force fmode_t)0x8) -/* file can be accessed using pwrite */ -#define FMODE_PWRITE ((__force fmode_t)0x10) -/* File is opened for execution with sys_execve / sys_uselib */ -#define FMODE_EXEC ((__force fmode_t)0x20) -/* File is opened with O_NDELAY (only set for block devices) */ -#define FMODE_NDELAY ((__force fmode_t)0x40) -/* File is opened with O_EXCL (only set for block devices) */ -#define FMODE_EXCL ((__force fmode_t)0x80) -/* File is opened using open(.., 3, ..) and is writeable only for ioctls - (specialy hack for floppy.c) */ -#define FMODE_WRITE_IOCTL ((__force fmode_t)0x100) -/* 32bit hashes as llseek() offset (for directories) */ -#define FMODE_32BITHASH ((__force fmode_t)0x200) -/* 64bit hashes as llseek() offset (for directories) */ -#define FMODE_64BITHASH ((__force fmode_t)0x400) - -/* - * Don't update ctime and mtime. - * - * Currently a special hack for the XFS open_by_handle ioctl, but we'll - * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon. - */ -#define FMODE_NOCMTIME ((__force fmode_t)0x800) - -/* Expect random access pattern */ -#define FMODE_RANDOM ((__force fmode_t)0x1000) - -/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */ -#define FMODE_UNSIGNED_OFFSET ((__force fmode_t)0x2000) - -/* File is opened with O_PATH; almost nothing can be done with it */ -#define FMODE_PATH ((__force fmode_t)0x4000) - -/* File was opened by fanotify and shouldn't generate fanotify events */ -#define FMODE_NONOTIFY ((__force fmode_t)0x1000000) - -/* - * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector - * that indicates that they should check the contents of the iovec are - * valid, but not check the memory that the iovec elements - * points too. - */ -#define CHECK_IOVEC_ONLY -1 - -#define SEL_IN 1 -#define SEL_OUT 2 -#define SEL_EX 4 - -/* public flags for file_system_type */ -#define FS_REQUIRES_DEV 1 -#define FS_BINARY_MOUNTDATA 2 -#define FS_HAS_SUBTYPE 4 -#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */ -#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move() - * during rename() internally. - */ /* * These are the fs-independent mount-flags: up to 32 flags are supported @@ -181,59 +102,6 @@ struct inodes_stat_t { #define MS_MGC_VAL 0xC0ED0000 #define MS_MGC_MSK 0xffff0000 -/* Inode flags - they have nothing to superblock flags now */ - -#define S_SYNC 1 /* Writes are synced at once */ -#define S_NOATIME 2 /* Do not update access times */ -#define S_APPEND 4 /* Append-only file */ -#define S_IMMUTABLE 8 /* Immutable file */ -#define S_DEAD 16 /* removed, but still open directory */ -#define S_NOQUOTA 32 /* Inode is not counted to quota */ -#define S_DIRSYNC 64 /* Directory modifications are synchronous */ -#define S_NOCMTIME 128 /* Do not update file c/mtime */ -#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */ -#define S_PRIVATE 512 /* Inode is fs-internal */ -#define S_IMA 1024 /* Inode has an associated IMA struct */ -#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */ -#define S_NOSEC 4096 /* no suid or xattr security attributes */ - -/* - * Note that nosuid etc flags are inode-specific: setting some file-system - * flags just means all the inodes inherit those flags by default. It might be - * possible to override it selectively if you really wanted to with some - * ioctl() that is not currently implemented. - * - * Exception: MS_RDONLY is always applied to the entire file system. - * - * Unfortunately, it is possible to change a filesystems flags with it mounted - * with files in use. This means that all of the inodes will not have their - * i_flags updated. Hence, i_flags no longer inherit the superblock mount - * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org - */ -#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg)) - -#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY) -#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \ - ((inode)->i_flags & S_SYNC)) -#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \ - ((inode)->i_flags & (S_SYNC|S_DIRSYNC))) -#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK) -#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME) -#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION) - -#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA) -#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND) -#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE) -#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL) - -#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD) -#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME) -#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE) -#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE) -#define IS_IMA(inode) ((inode)->i_flags & S_IMA) -#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT) -#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC) - /* the read-only stuff doesn't really belong here, but any other place is probably as bad and I don't want to create yet another include file. */ -- cgit v1.2.3-70-g09d2 From c54d0dc35324300cdc502137f5c0ee44f53d7a8b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 16 Oct 2012 13:37:17 -0400 Subject: bury SEL_{IN,OUT,EX} Had not been used for more than a decade and half; it used to be a part of (in-kernel) ->select() API and it has been pining for fjords since 2.1.23pre1. This is an ex-parrot... Signed-off-by: Al Viro --- include/linux/fs.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/include/linux/fs.h b/include/linux/fs.h index 8b53931b5a7..b33cfc97b9c 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -131,10 +131,6 @@ typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset, */ #define CHECK_IOVEC_ONLY -1 -#define SEL_IN 1 -#define SEL_OUT 2 -#define SEL_EX 4 - /* * The below are the various read and write types that we support. Some of * them include behavioral modifiers that send information down to the -- cgit v1.2.3-70-g09d2 From 73b7656ce4e09eb137ee6f845a9e11a7f132df1c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Oct 2012 14:08:40 -0400 Subject: MAINTAINERS: Add explicit section for IPSEC networking. Signed-off-by: David S. Miller --- MAINTAINERS | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index e73060fe078..6d6632f7157 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5019,6 +5019,20 @@ F: net/ipv6/ F: include/net/ip* F: arch/x86/net/* +NETWORKING [IPSEC] +M: Steffen Klassert +M: Herbert Xu +M: "David S. Miller" +L: netdev@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git +S: Maintained +F: net/xfrm/ +F: net/key/ +F: net/ipv4/xfrm* +F: net/ipv6/xfrm* +F: include/uapi/linux/xfrm.h +F: include/net/xfrm.h + NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK) M: Paul Moore L: netdev@vger.kernel.org -- cgit v1.2.3-70-g09d2 From 55462cf30ad9768fff6a6d36db21879146a39bdf Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sun, 14 Oct 2012 04:30:56 +0000 Subject: vlan: fix bond/team enslave of vlan challenged slave/port In vlan_uses_dev() check for number of vlan devs rather than existence of vlan_info. The reason is that vlan id 0 is there without appropriate vlan dev on it by default which prevented from enslaving vlan challenged dev. Reported-by: Jon Stanley Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- net/8021q/vlan_core.c | 9 ++++++++- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index b721902bb6b..b2530b00212 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1519,7 +1519,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) /* no need to lock since we're protected by rtnl_lock */ if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) { pr_debug("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name); - if (bond_vlan_used(bond)) { + if (vlan_uses_dev(bond_dev)) { pr_err("%s: Error: cannot enslave VLAN challenged slave %s on VLAN enabled bond %s\n", bond_dev->name, slave_dev->name, bond_dev->name); return -EPERM; diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index fbbf1fa0094..65e06abe023 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -366,6 +366,13 @@ EXPORT_SYMBOL(vlan_vids_del_by_dev); bool vlan_uses_dev(const struct net_device *dev) { - return rtnl_dereference(dev->vlan_info) ? true : false; + struct vlan_info *vlan_info; + + ASSERT_RTNL(); + + vlan_info = rtnl_dereference(dev->vlan_info); + if (!vlan_info) + return false; + return vlan_info->grp.nr_vlan_devs ? true : false; } EXPORT_SYMBOL(vlan_uses_dev); -- cgit v1.2.3-70-g09d2 From f6e80abeab928b7c47cc1fbf53df13b4398a2bec Mon Sep 17 00:00:00 2001 From: Zijie Pan Date: Mon, 15 Oct 2012 03:56:39 +0000 Subject: sctp: fix call to SCTP_CMD_PROCESS_SACK in sctp_cmd_interpreter() Bug introduced by commit edfee0339e681a784ebacec7e8c2dc97dc6d2839 (sctp: check src addr when processing SACK to update transport state) Signed-off-by: Zijie Pan Signed-off-by: Nicolas Dichtel Acked-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/sm_sideeffect.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 57f7de839b0..6773d780362 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -1642,8 +1642,9 @@ static int sctp_cmd_interpreter(sctp_event_t event_type, asoc->outqueue.outstanding_bytes; sackh.num_gap_ack_blocks = 0; sackh.num_dup_tsns = 0; + chunk->subh.sack_hdr = &sackh; sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_SACK, - SCTP_SACKH(&sackh)); + SCTP_CHUNK(chunk)); break; case SCTP_CMD_DISCARD_PACKET: -- cgit v1.2.3-70-g09d2 From 1c8161a8249fa32408e3c073f992141c9d257332 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Mon, 15 Oct 2012 19:21:17 +0000 Subject: smsgiucv: reestablish IUCV path after resume smsg_pm_restore_thaw() uses wrong checking before reconnecting the IUCV path to *MSG. It is corrected with this patch. Signed-off-by: Ursula Braun Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/smsgiucv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c index 207b7d74244..d8f990b6b33 100644 --- a/drivers/s390/net/smsgiucv.c +++ b/drivers/s390/net/smsgiucv.c @@ -157,7 +157,7 @@ static int smsg_pm_restore_thaw(struct device *dev) #ifdef CONFIG_PM_DEBUG printk(KERN_WARNING "smsg_pm_restore_thaw\n"); #endif - if (smsg_path && iucv_path_connected) { + if (smsg_path && !iucv_path_connected) { memset(smsg_path, 0, sizeof(*smsg_path)); smsg_path->msglim = 255; smsg_path->flags = 0; -- cgit v1.2.3-70-g09d2 From 2efaf5ff7fa2d45debc27cd9b3d235df61d641fb Mon Sep 17 00:00:00 2001 From: Stefan Raspl Date: Mon, 15 Oct 2012 19:21:18 +0000 Subject: qeth: fix deadlock between recovery and bonding driver The recovery thread, when failing, tears down the respective interface. To do so, it needs to obtain the rtnl lock first, as the interface configuration is changed. If another process tries to modify an interface setting at the same time, that process can obtain the rtnl lock first, but the respective callback in the qeth driver will block until recovery has completed - which cannot happen since the calling process already obtained it. In one particular case, the bonding driver acquired the rtnl lock to modify the card's MAC address, while the recovery failed at the same time due to the card being removed. Hence qeth_l2_set_mac_address (implicitly holding the rtnl lock) was waiting on qeth_l2_recover, which deadlocked when waiting on the rtnl lock. This patch uses rtnl_trylock instead of rtnl_lock in the recovery thread. If the lock cannot be obtained, the interface will be left up, but the card state remains in CARD_STATE_RECOVER, which will prevent any further activities on the card. Signed-off-by: Stefan Raspl Signed-off-by: Frank Blaschka Reviewed-by: Ursula Braun Signed-off-by: David S. Miller --- drivers/s390/net/qeth_l2_main.c | 11 ++++++----- drivers/s390/net/qeth_l3_main.c | 11 ++++++----- 2 files changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 2db409330c2..e67e0258aec 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1141,11 +1141,12 @@ static int qeth_l2_recover(void *ptr) dev_info(&card->gdev->dev, "Device successfully recovered!\n"); else { - rtnl_lock(); - dev_close(card->dev); - rtnl_unlock(); - dev_warn(&card->gdev->dev, "The qeth device driver " - "failed to recover an error on the device\n"); + if (rtnl_trylock()) { + dev_close(card->dev); + rtnl_unlock(); + dev_warn(&card->gdev->dev, "The qeth device driver " + "failed to recover an error on the device\n"); + } } qeth_clear_thread_start_bit(card, QETH_RECOVER_THREAD); qeth_clear_thread_running_bit(card, QETH_RECOVER_THREAD); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 4cd310cb5bd..5ba39065849 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3510,11 +3510,12 @@ static int qeth_l3_recover(void *ptr) dev_info(&card->gdev->dev, "Device successfully recovered!\n"); else { - rtnl_lock(); - dev_close(card->dev); - rtnl_unlock(); - dev_warn(&card->gdev->dev, "The qeth device driver " - "failed to recover an error on the device\n"); + if (rtnl_trylock()) { + dev_close(card->dev); + rtnl_unlock(); + dev_warn(&card->gdev->dev, "The qeth device driver " + "failed to recover an error on the device\n"); + } } qeth_clear_thread_start_bit(card, QETH_RECOVER_THREAD); qeth_clear_thread_running_bit(card, QETH_RECOVER_THREAD); -- cgit v1.2.3-70-g09d2 From 2384d6aa079de7c16c7877220d3cd4c6f4f50767 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Tue, 16 Oct 2012 01:28:27 +0000 Subject: bnx2x: fix handling mf storage modes Since commit a3348722 AFEX FCoE function is continuously reset. The patch prevents the resetting and removes debug print to stop garbaging syslog. Signed-off-by: Dmitry Kravkov Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 10 +++++++--- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 2 +- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 24220992413..4833b6a9031 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -2957,9 +2957,13 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) skb_shinfo(skb)->nr_frags + BDS_PER_TX_PKT + NEXT_CNT_PER_TX_PKT(MAX_BDS_PER_TX_PKT))) { - bnx2x_fp_qstats(bp, txdata->parent_fp)->driver_xoff++; - netif_tx_stop_queue(txq); - BNX2X_ERR("BUG! Tx ring full when queue awake!\n"); + /* Handle special storage cases separately */ + if (txdata->tx_ring_size != 0) { + BNX2X_ERR("BUG! Tx ring full when queue awake!\n"); + bnx2x_fp_qstats(bp, txdata->parent_fp)->driver_xoff++; + netif_tx_stop_queue(txq); + } + return NETDEV_TX_BUSY; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 71971a161bd..614981c0226 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -126,7 +126,7 @@ static inline int bnx2x_exe_queue_add(struct bnx2x *bp, /* Check if this request is ok */ rc = o->validate(bp, o->owner, elem); if (rc) { - BNX2X_ERR("Preamble failed: %d\n", rc); + DP(BNX2X_MSG_SP, "Preamble failed: %d\n", rc); goto free_and_exit; } } -- cgit v1.2.3-70-g09d2 From 9f0d3c2781baa1102108e16efbe640dd74564a7c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 16 Oct 2012 07:37:27 +0000 Subject: ipv6: addrconf: fix /proc/net/if_inet6 Commit 1d5783030a1 (ipv6/addrconf: speedup /proc/net/if_inet6 filling) added bugs hiding some devices from if_inet6 and breaking applications. "ip -6 addr" could still display all IPv6 addresses, while "ifconfig -a" couldnt. One way to reproduce the bug is by starting in a shell : unshare -n /bin/bash ifconfig lo up And in original net namespace, lo device disappeared from if_inet6 Reported-by: Jan Hinnerk Stosch Tested-by: Jan Hinnerk Stosch Signed-off-by: Eric Dumazet Cc: Mihai Maruseac Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index d7c56f8a5b4..0424e4e2741 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -3064,14 +3064,15 @@ static struct inet6_ifaddr *if6_get_first(struct seq_file *seq, loff_t pos) struct hlist_node *n; hlist_for_each_entry_rcu_bh(ifa, n, &inet6_addr_lst[state->bucket], addr_lst) { + if (!net_eq(dev_net(ifa->idev->dev), net)) + continue; /* sync with offset */ if (p < state->offset) { p++; continue; } state->offset++; - if (net_eq(dev_net(ifa->idev->dev), net)) - return ifa; + return ifa; } /* prepare for next bucket */ @@ -3089,18 +3090,20 @@ static struct inet6_ifaddr *if6_get_next(struct seq_file *seq, struct hlist_node *n = &ifa->addr_lst; hlist_for_each_entry_continue_rcu_bh(ifa, n, addr_lst) { + if (!net_eq(dev_net(ifa->idev->dev), net)) + continue; state->offset++; - if (net_eq(dev_net(ifa->idev->dev), net)) - return ifa; + return ifa; } while (++state->bucket < IN6_ADDR_HSIZE) { state->offset = 0; hlist_for_each_entry_rcu_bh(ifa, n, &inet6_addr_lst[state->bucket], addr_lst) { + if (!net_eq(dev_net(ifa->idev->dev), net)) + continue; state->offset++; - if (net_eq(dev_net(ifa->idev->dev), net)) - return ifa; + return ifa; } } -- cgit v1.2.3-70-g09d2 From e793d8c6740f8fe704fa216e95685f4d92c4c4b9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 16 Oct 2012 13:05:25 -0700 Subject: sparc64: Fix bit twiddling in sparc_pmu_enable_event(). There was a serious disconnect in the logic happening in sparc_pmu_disable_event() vs. sparc_pmu_enable_event(). Event disable is implemented by programming a NOP event into the PCR. However, event enable was not reversing this operation. Instead, it was setting the User/Priv/Hypervisor trace enable bits. That's not sparc_pmu_enable_event()'s job, that's what sparc_pmu_enable() and sparc_pmu_disable() do . The intent of sparc_pmu_enable_event() is clear, since it first clear out the event type encoding field. So fix this by OR'ing in the event encoding rather than the trace enable bits. Signed-off-by: David S. Miller --- arch/sparc/kernel/perf_event.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index 9e96f849a74..885a8af7406 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -817,15 +817,17 @@ static u64 nop_for_index(int idx) static inline void sparc_pmu_enable_event(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc, int idx) { - u64 val, mask = mask_for_index(idx); + u64 enc, val, mask = mask_for_index(idx); int pcr_index = 0; if (sparc_pmu->num_pcrs > 1) pcr_index = idx; + enc = perf_event_get_enc(cpuc->events[idx]); + val = cpuc->pcr[pcr_index]; val &= ~mask; - val |= hwc->config; + val |= event_encoding(enc, idx); cpuc->pcr[pcr_index] = val; pcr_ops->write_pcr(pcr_index, cpuc->pcr[pcr_index]); -- cgit v1.2.3-70-g09d2 From 5210edcd527773c227465ad18e416a894966324f Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 28 Sep 2012 11:34:10 -0700 Subject: MIPS: Make __{,n,u}delay declarations match definitions and generic delay.h At some recent point arch/mips/include/asm/delay.h has started being included into csrc-octeon.c where the __?delay() functions are defined. This causes a compile failure due to conflicting declarations and definitions of the functions. It turns out that the generic definitions in arch/mips/lib/delay.c also conflict. Proposed fix: Declare the functions to take unsigned long parameters just like asm-generic (and x86) does. Update __delay to agree (__ndelay and __udelay need no change). Bonus: Get rid of 'inline' from __delay() definition, as it is globally visible, and the compiler should be making this decision itself (it does in fact inline the function without being told to). Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4354/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/delay.h | 6 +++--- arch/mips/lib/delay.c | 6 +++++- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/mips/include/asm/delay.h b/arch/mips/include/asm/delay.h index e7cd78277c2..dc0a5f77a35 100644 --- a/arch/mips/include/asm/delay.h +++ b/arch/mips/include/asm/delay.h @@ -13,9 +13,9 @@ #include -extern void __delay(unsigned int loops); -extern void __ndelay(unsigned int ns); -extern void __udelay(unsigned int us); +extern void __delay(unsigned long loops); +extern void __ndelay(unsigned long ns); +extern void __udelay(unsigned long us); #define ndelay(ns) __ndelay(ns) #define udelay(us) __udelay(us) diff --git a/arch/mips/lib/delay.c b/arch/mips/lib/delay.c index 5995969e8c4..dc81ca8dc0d 100644 --- a/arch/mips/lib/delay.c +++ b/arch/mips/lib/delay.c @@ -15,13 +15,17 @@ #include #include -inline void __delay(unsigned int loops) +void __delay(unsigned long loops) { __asm__ __volatile__ ( " .set noreorder \n" " .align 3 \n" "1: bnez %0, 1b \n" +#if __SIZEOF_LONG__ == 4 " subu %0, 1 \n" +#else + " dsubu %0, 1 \n" +#endif " .set reorder \n" : "=r" (loops) : "0" (loops)); -- cgit v1.2.3-70-g09d2 From 02a5417751c31cd64197652c000a5ab0d3261465 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 13 Oct 2012 22:46:26 +0200 Subject: MIPS: tlbex: Deal with re-definition of label The microassembler used in tlbex.c does not notice if a label is redefined resulting in relocations against such labels silently missrelocated. The issues exists since commit add6eb04776db4189ea89f596cbcde31b899be9d [Synthesize TLB exception handlers at runtime.] in 2.6.10 and went unnoticed for so long because the relocations for the affected branches got computed to do something *almost* sensible. The issue affects R4000, R4400, QED/IDT RM5230, RM5231, RM5260, RM5261, RM5270 and RM5271 processors. Signed-off-by: Ralf Baechle --- arch/mips/mm/tlbex.c | 41 ++++++++++++++++++++++++++++++++++------- 1 file changed, 34 insertions(+), 7 deletions(-) diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 658a520364c..6ea152552e5 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -148,8 +148,8 @@ enum label_id { label_leave, label_vmalloc, label_vmalloc_done, - label_tlbw_hazard, - label_split, + label_tlbw_hazard_0, + label_split = label_tlbw_hazard_0 + 8, label_tlbl_goaround1, label_tlbl_goaround2, label_nopage_tlbl, @@ -167,7 +167,7 @@ UASM_L_LA(_second_part) UASM_L_LA(_leave) UASM_L_LA(_vmalloc) UASM_L_LA(_vmalloc_done) -UASM_L_LA(_tlbw_hazard) +/* _tlbw_hazard_x is handled differently. */ UASM_L_LA(_split) UASM_L_LA(_tlbl_goaround1) UASM_L_LA(_tlbl_goaround2) @@ -181,6 +181,30 @@ UASM_L_LA(_large_segbits_fault) UASM_L_LA(_tlb_huge_update) #endif +static int __cpuinitdata hazard_instance; + +static void uasm_bgezl_hazard(u32 **p, struct uasm_reloc **r, int instance) +{ + switch (instance) { + case 0 ... 7: + uasm_il_bgezl(p, r, 0, label_tlbw_hazard_0 + instance); + return; + default: + BUG(); + } +} + +static void uasm_bgezl_label(struct uasm_label **l, u32 **p, int instance) +{ + switch (instance) { + case 0 ... 7: + uasm_build_label(l, *p, label_tlbw_hazard_0 + instance); + break; + default: + BUG(); + } +} + /* * For debug purposes. */ @@ -478,9 +502,10 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, * This branch uses up a mtc0 hazard nop slot and saves * two nops after the tlbw instruction. */ - uasm_il_bgezl(p, r, 0, label_tlbw_hazard); + uasm_bgezl_hazard(p, r, hazard_instance); tlbw(p); - uasm_l_tlbw_hazard(l, *p); + uasm_bgezl_label(l, p, hazard_instance); + hazard_instance++; uasm_i_nop(p); break; @@ -527,14 +552,16 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, break; case CPU_NEVADA: + uasm_i_nop(p); /* QED specifies 2 nops hazard */ uasm_i_nop(p); /* QED specifies 2 nops hazard */ /* * This branch uses up a mtc0 hazard nop slot and saves * a nop after the tlbw instruction. */ - uasm_il_bgezl(p, r, 0, label_tlbw_hazard); + uasm_bgezl_hazard(p, r, hazard_instance); tlbw(p); - uasm_l_tlbw_hazard(l, *p); + uasm_bgezl_label(l, p, hazard_instance); + hazard_instance++; break; case CPU_RM7000: -- cgit v1.2.3-70-g09d2 From 359187d647a7a7813444ff5932d0b862f970bb0f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 16 Oct 2012 22:13:06 +0200 Subject: MIPS: R5000: Fix TLB hazard handling. R5000 and the Nevada CPUs (RM5230, RM5231, RM5260, RM5261, RM5270 and RM5271) are basically the same CPU core and all are documented to require two instructions separating a write to c0_pagemask, c0_entryhi, c0_entrylo0, c0_entrylo1 or c0_index. So far we were only providing on cycle before / after a TLBR/TLBWI for R5000 but 3 cycles before and 1 cycles after for the Nevadas. Signed-off-by: Ralf Baechle --- arch/mips/mm/tlbex.c | 23 ++++++++--------------- 1 file changed, 8 insertions(+), 15 deletions(-) diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 6ea152552e5..2833dcb67b5 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -511,13 +511,19 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_R4600: case CPU_R4700: - case CPU_R5000: - case CPU_R5000A: uasm_i_nop(p); tlbw(p); uasm_i_nop(p); break; + case CPU_R5000: + case CPU_R5000A: + case CPU_NEVADA: + uasm_i_nop(p); /* QED specifies 2 nops hazard */ + uasm_i_nop(p); /* QED specifies 2 nops hazard */ + tlbw(p); + break; + case CPU_R4300: case CPU_5KC: case CPU_TX49XX: @@ -551,19 +557,6 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, tlbw(p); break; - case CPU_NEVADA: - uasm_i_nop(p); /* QED specifies 2 nops hazard */ - uasm_i_nop(p); /* QED specifies 2 nops hazard */ - /* - * This branch uses up a mtc0 hazard nop slot and saves - * a nop after the tlbw instruction. - */ - uasm_bgezl_hazard(p, r, hazard_instance); - tlbw(p); - uasm_bgezl_label(l, p, hazard_instance); - hazard_instance++; - break; - case CPU_RM7000: uasm_i_nop(p); uasm_i_nop(p); -- cgit v1.2.3-70-g09d2 From 70c1674f62026e455c0c821fb7f4baf24d2d1139 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 16 Oct 2012 21:28:05 +0100 Subject: UAPI: (Scripted) Disintegrate arch/parisc/include/asm Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones --- arch/parisc/include/asm/Kbuild | 2 - arch/parisc/include/asm/bitsperlong.h | 20 - arch/parisc/include/asm/byteorder.h | 6 - arch/parisc/include/asm/errno.h | 127 ----- arch/parisc/include/asm/fcntl.h | 40 -- arch/parisc/include/asm/ioctl.h | 44 -- arch/parisc/include/asm/ioctls.h | 92 ---- arch/parisc/include/asm/ipcbuf.h | 27 - arch/parisc/include/asm/mman.h | 73 --- arch/parisc/include/asm/msgbuf.h | 37 -- arch/parisc/include/asm/pdc.h | 423 +-------------- arch/parisc/include/asm/posix_types.h | 24 - arch/parisc/include/asm/ptrace.h | 46 +- arch/parisc/include/asm/resource.h | 7 - arch/parisc/include/asm/sembuf.h | 29 - arch/parisc/include/asm/setup.h | 6 - arch/parisc/include/asm/shmbuf.h | 58 -- arch/parisc/include/asm/sigcontext.h | 20 - arch/parisc/include/asm/siginfo.h | 9 - arch/parisc/include/asm/signal.h | 113 +--- arch/parisc/include/asm/socket.h | 77 --- arch/parisc/include/asm/sockios.h | 13 - arch/parisc/include/asm/stat.h | 100 ---- arch/parisc/include/asm/statfs.h | 7 - arch/parisc/include/asm/swab.h | 66 --- arch/parisc/include/asm/termbits.h | 201 ------- arch/parisc/include/asm/termios.h | 41 +- arch/parisc/include/asm/types.h | 6 - arch/parisc/include/asm/unistd.h | 835 +--------------------------- arch/parisc/include/uapi/asm/Kbuild | 28 + arch/parisc/include/uapi/asm/bitsperlong.h | 20 + arch/parisc/include/uapi/asm/byteorder.h | 6 + arch/parisc/include/uapi/asm/errno.h | 127 +++++ arch/parisc/include/uapi/asm/fcntl.h | 40 ++ arch/parisc/include/uapi/asm/ioctl.h | 44 ++ arch/parisc/include/uapi/asm/ioctls.h | 92 ++++ arch/parisc/include/uapi/asm/ipcbuf.h | 27 + arch/parisc/include/uapi/asm/mman.h | 73 +++ arch/parisc/include/uapi/asm/msgbuf.h | 37 ++ arch/parisc/include/uapi/asm/pdc.h | 427 +++++++++++++++ arch/parisc/include/uapi/asm/posix_types.h | 24 + arch/parisc/include/uapi/asm/ptrace.h | 47 ++ arch/parisc/include/uapi/asm/resource.h | 7 + arch/parisc/include/uapi/asm/sembuf.h | 29 + arch/parisc/include/uapi/asm/setup.h | 6 + arch/parisc/include/uapi/asm/shmbuf.h | 58 ++ arch/parisc/include/uapi/asm/sigcontext.h | 20 + arch/parisc/include/uapi/asm/siginfo.h | 9 + arch/parisc/include/uapi/asm/signal.h | 118 ++++ arch/parisc/include/uapi/asm/socket.h | 77 +++ arch/parisc/include/uapi/asm/sockios.h | 13 + arch/parisc/include/uapi/asm/stat.h | 100 ++++ arch/parisc/include/uapi/asm/statfs.h | 7 + arch/parisc/include/uapi/asm/swab.h | 66 +++ arch/parisc/include/uapi/asm/termbits.h | 201 +++++++ arch/parisc/include/uapi/asm/termios.h | 43 ++ arch/parisc/include/uapi/asm/types.h | 6 + arch/parisc/include/uapi/asm/unistd.h | 837 +++++++++++++++++++++++++++++ 58 files changed, 2596 insertions(+), 2542 deletions(-) delete mode 100644 arch/parisc/include/asm/bitsperlong.h delete mode 100644 arch/parisc/include/asm/byteorder.h delete mode 100644 arch/parisc/include/asm/errno.h delete mode 100644 arch/parisc/include/asm/fcntl.h delete mode 100644 arch/parisc/include/asm/ioctl.h delete mode 100644 arch/parisc/include/asm/ioctls.h delete mode 100644 arch/parisc/include/asm/ipcbuf.h delete mode 100644 arch/parisc/include/asm/mman.h delete mode 100644 arch/parisc/include/asm/msgbuf.h delete mode 100644 arch/parisc/include/asm/posix_types.h delete mode 100644 arch/parisc/include/asm/resource.h delete mode 100644 arch/parisc/include/asm/sembuf.h delete mode 100644 arch/parisc/include/asm/setup.h delete mode 100644 arch/parisc/include/asm/shmbuf.h delete mode 100644 arch/parisc/include/asm/sigcontext.h delete mode 100644 arch/parisc/include/asm/siginfo.h delete mode 100644 arch/parisc/include/asm/socket.h delete mode 100644 arch/parisc/include/asm/sockios.h delete mode 100644 arch/parisc/include/asm/stat.h delete mode 100644 arch/parisc/include/asm/statfs.h delete mode 100644 arch/parisc/include/asm/swab.h delete mode 100644 arch/parisc/include/asm/termbits.h delete mode 100644 arch/parisc/include/asm/types.h create mode 100644 arch/parisc/include/uapi/asm/bitsperlong.h create mode 100644 arch/parisc/include/uapi/asm/byteorder.h create mode 100644 arch/parisc/include/uapi/asm/errno.h create mode 100644 arch/parisc/include/uapi/asm/fcntl.h create mode 100644 arch/parisc/include/uapi/asm/ioctl.h create mode 100644 arch/parisc/include/uapi/asm/ioctls.h create mode 100644 arch/parisc/include/uapi/asm/ipcbuf.h create mode 100644 arch/parisc/include/uapi/asm/mman.h create mode 100644 arch/parisc/include/uapi/asm/msgbuf.h create mode 100644 arch/parisc/include/uapi/asm/pdc.h create mode 100644 arch/parisc/include/uapi/asm/posix_types.h create mode 100644 arch/parisc/include/uapi/asm/ptrace.h create mode 100644 arch/parisc/include/uapi/asm/resource.h create mode 100644 arch/parisc/include/uapi/asm/sembuf.h create mode 100644 arch/parisc/include/uapi/asm/setup.h create mode 100644 arch/parisc/include/uapi/asm/shmbuf.h create mode 100644 arch/parisc/include/uapi/asm/sigcontext.h create mode 100644 arch/parisc/include/uapi/asm/siginfo.h create mode 100644 arch/parisc/include/uapi/asm/signal.h create mode 100644 arch/parisc/include/uapi/asm/socket.h create mode 100644 arch/parisc/include/uapi/asm/sockios.h create mode 100644 arch/parisc/include/uapi/asm/stat.h create mode 100644 arch/parisc/include/uapi/asm/statfs.h create mode 100644 arch/parisc/include/uapi/asm/swab.h create mode 100644 arch/parisc/include/uapi/asm/termbits.h create mode 100644 arch/parisc/include/uapi/asm/termios.h create mode 100644 arch/parisc/include/uapi/asm/types.h create mode 100644 arch/parisc/include/uapi/asm/unistd.h diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild index 7728106426a..bac8debecff 100644 --- a/arch/parisc/include/asm/Kbuild +++ b/arch/parisc/include/asm/Kbuild @@ -1,6 +1,4 @@ -include include/asm-generic/Kbuild.asm -header-y += pdc.h generic-y += word-at-a-time.h auxvec.h user.h cputime.h emergency-restart.h \ segment.h topology.h vga.h device.h percpu.h hw_irq.h mutex.h \ div64.h irq_regs.h kdebug.h kvm_para.h local64.h local.h param.h \ diff --git a/arch/parisc/include/asm/bitsperlong.h b/arch/parisc/include/asm/bitsperlong.h deleted file mode 100644 index 75196b415d3..00000000000 --- a/arch/parisc/include/asm/bitsperlong.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_PARISC_BITSPERLONG_H -#define __ASM_PARISC_BITSPERLONG_H - -/* - * using CONFIG_* outside of __KERNEL__ is wrong, - * __LP64__ was also removed from headers, so what - * is the right approach on parisc? - * -arnd - */ -#if (defined(__KERNEL__) && defined(CONFIG_64BIT)) || defined (__LP64__) -#define __BITS_PER_LONG 64 -#define SHIFT_PER_LONG 6 -#else -#define __BITS_PER_LONG 32 -#define SHIFT_PER_LONG 5 -#endif - -#include - -#endif /* __ASM_PARISC_BITSPERLONG_H */ diff --git a/arch/parisc/include/asm/byteorder.h b/arch/parisc/include/asm/byteorder.h deleted file mode 100644 index 58af2c5f5d6..00000000000 --- a/arch/parisc/include/asm/byteorder.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _PARISC_BYTEORDER_H -#define _PARISC_BYTEORDER_H - -#include - -#endif /* _PARISC_BYTEORDER_H */ diff --git a/arch/parisc/include/asm/errno.h b/arch/parisc/include/asm/errno.h deleted file mode 100644 index 135ad6047e5..00000000000 --- a/arch/parisc/include/asm/errno.h +++ /dev/null @@ -1,127 +0,0 @@ -#ifndef _PARISC_ERRNO_H -#define _PARISC_ERRNO_H - -#include - -#define ENOMSG 35 /* No message of desired type */ -#define EIDRM 36 /* Identifier removed */ -#define ECHRNG 37 /* Channel number out of range */ -#define EL2NSYNC 38 /* Level 2 not synchronized */ -#define EL3HLT 39 /* Level 3 halted */ -#define EL3RST 40 /* Level 3 reset */ -#define ELNRNG 41 /* Link number out of range */ -#define EUNATCH 42 /* Protocol driver not attached */ -#define ENOCSI 43 /* No CSI structure available */ -#define EL2HLT 44 /* Level 2 halted */ -#define EDEADLK 45 /* Resource deadlock would occur */ -#define EDEADLOCK EDEADLK -#define ENOLCK 46 /* No record locks available */ -#define EILSEQ 47 /* Illegal byte sequence */ - -#define ENONET 50 /* Machine is not on the network */ -#define ENODATA 51 /* No data available */ -#define ETIME 52 /* Timer expired */ -#define ENOSR 53 /* Out of streams resources */ -#define ENOSTR 54 /* Device not a stream */ -#define ENOPKG 55 /* Package not installed */ - -#define ENOLINK 57 /* Link has been severed */ -#define EADV 58 /* Advertise error */ -#define ESRMNT 59 /* Srmount error */ -#define ECOMM 60 /* Communication error on send */ -#define EPROTO 61 /* Protocol error */ - -#define EMULTIHOP 64 /* Multihop attempted */ - -#define EDOTDOT 66 /* RFS specific error */ -#define EBADMSG 67 /* Not a data message */ -#define EUSERS 68 /* Too many users */ -#define EDQUOT 69 /* Quota exceeded */ -#define ESTALE 70 /* Stale NFS file handle */ -#define EREMOTE 71 /* Object is remote */ -#define EOVERFLOW 72 /* Value too large for defined data type */ - -/* these errnos are defined by Linux but not HPUX. */ - -#define EBADE 160 /* Invalid exchange */ -#define EBADR 161 /* Invalid request descriptor */ -#define EXFULL 162 /* Exchange full */ -#define ENOANO 163 /* No anode */ -#define EBADRQC 164 /* Invalid request code */ -#define EBADSLT 165 /* Invalid slot */ -#define EBFONT 166 /* Bad font file format */ -#define ENOTUNIQ 167 /* Name not unique on network */ -#define EBADFD 168 /* File descriptor in bad state */ -#define EREMCHG 169 /* Remote address changed */ -#define ELIBACC 170 /* Can not access a needed shared library */ -#define ELIBBAD 171 /* Accessing a corrupted shared library */ -#define ELIBSCN 172 /* .lib section in a.out corrupted */ -#define ELIBMAX 173 /* Attempting to link in too many shared libraries */ -#define ELIBEXEC 174 /* Cannot exec a shared library directly */ -#define ERESTART 175 /* Interrupted system call should be restarted */ -#define ESTRPIPE 176 /* Streams pipe error */ -#define EUCLEAN 177 /* Structure needs cleaning */ -#define ENOTNAM 178 /* Not a XENIX named type file */ -#define ENAVAIL 179 /* No XENIX semaphores available */ -#define EISNAM 180 /* Is a named type file */ -#define EREMOTEIO 181 /* Remote I/O error */ -#define ENOMEDIUM 182 /* No medium found */ -#define EMEDIUMTYPE 183 /* Wrong medium type */ -#define ENOKEY 184 /* Required key not available */ -#define EKEYEXPIRED 185 /* Key has expired */ -#define EKEYREVOKED 186 /* Key has been revoked */ -#define EKEYREJECTED 187 /* Key was rejected by service */ - -/* We now return you to your regularly scheduled HPUX. */ - -#define ENOSYM 215 /* symbol does not exist in executable */ -#define ENOTSOCK 216 /* Socket operation on non-socket */ -#define EDESTADDRREQ 217 /* Destination address required */ -#define EMSGSIZE 218 /* Message too long */ -#define EPROTOTYPE 219 /* Protocol wrong type for socket */ -#define ENOPROTOOPT 220 /* Protocol not available */ -#define EPROTONOSUPPORT 221 /* Protocol not supported */ -#define ESOCKTNOSUPPORT 222 /* Socket type not supported */ -#define EOPNOTSUPP 223 /* Operation not supported on transport endpoint */ -#define EPFNOSUPPORT 224 /* Protocol family not supported */ -#define EAFNOSUPPORT 225 /* Address family not supported by protocol */ -#define EADDRINUSE 226 /* Address already in use */ -#define EADDRNOTAVAIL 227 /* Cannot assign requested address */ -#define ENETDOWN 228 /* Network is down */ -#define ENETUNREACH 229 /* Network is unreachable */ -#define ENETRESET 230 /* Network dropped connection because of reset */ -#define ECONNABORTED 231 /* Software caused connection abort */ -#define ECONNRESET 232 /* Connection reset by peer */ -#define ENOBUFS 233 /* No buffer space available */ -#define EISCONN 234 /* Transport endpoint is already connected */ -#define ENOTCONN 235 /* Transport endpoint is not connected */ -#define ESHUTDOWN 236 /* Cannot send after transport endpoint shutdown */ -#define ETOOMANYREFS 237 /* Too many references: cannot splice */ -#define EREFUSED ECONNREFUSED /* for HP's NFS apparently */ -#define ETIMEDOUT 238 /* Connection timed out */ -#define ECONNREFUSED 239 /* Connection refused */ -#define EREMOTERELEASE 240 /* Remote peer released connection */ -#define EHOSTDOWN 241 /* Host is down */ -#define EHOSTUNREACH 242 /* No route to host */ - -#define EALREADY 244 /* Operation already in progress */ -#define EINPROGRESS 245 /* Operation now in progress */ -#define EWOULDBLOCK 246 /* Operation would block (Linux returns EAGAIN) */ -#define ENOTEMPTY 247 /* Directory not empty */ -#define ENAMETOOLONG 248 /* File name too long */ -#define ELOOP 249 /* Too many symbolic links encountered */ -#define ENOSYS 251 /* Function not implemented */ - -#define ENOTSUP 252 /* Function not implemented (POSIX.4 / HPUX) */ -#define ECANCELLED 253 /* aio request was canceled before complete (POSIX.4 / HPUX) */ -#define ECANCELED ECANCELLED /* SuSv3 and Solaris wants one 'L' */ - -/* for robust mutexes */ -#define EOWNERDEAD 254 /* Owner died */ -#define ENOTRECOVERABLE 255 /* State not recoverable */ - -#define ERFKILL 256 /* Operation not possible due to RF-kill */ - -#define EHWPOISON 257 /* Memory page has hardware error */ - -#endif diff --git a/arch/parisc/include/asm/fcntl.h b/arch/parisc/include/asm/fcntl.h deleted file mode 100644 index 0304b92ccfe..00000000000 --- a/arch/parisc/include/asm/fcntl.h +++ /dev/null @@ -1,40 +0,0 @@ -#ifndef _PARISC_FCNTL_H -#define _PARISC_FCNTL_H - -#define O_APPEND 000000010 -#define O_BLKSEEK 000000100 /* HPUX only */ -#define O_CREAT 000000400 /* not fcntl */ -#define O_EXCL 000002000 /* not fcntl */ -#define O_LARGEFILE 000004000 -#define __O_SYNC 000100000 -#define O_SYNC (__O_SYNC|O_DSYNC) -#define O_NONBLOCK 000200004 /* HPUX has separate NDELAY & NONBLOCK */ -#define O_NOCTTY 000400000 /* not fcntl */ -#define O_DSYNC 001000000 /* HPUX only */ -#define O_RSYNC 002000000 /* HPUX only */ -#define O_NOATIME 004000000 -#define O_CLOEXEC 010000000 /* set close_on_exec */ - -#define O_DIRECTORY 000010000 /* must be a directory */ -#define O_NOFOLLOW 000000200 /* don't follow links */ -#define O_INVISIBLE 004000000 /* invisible I/O, for DMAPI/XDSM */ - -#define O_PATH 020000000 - -#define F_GETLK64 8 -#define F_SETLK64 9 -#define F_SETLKW64 10 - -#define F_GETOWN 11 /* for sockets. */ -#define F_SETOWN 12 /* for sockets. */ -#define F_SETSIG 13 /* for sockets. */ -#define F_GETSIG 14 /* for sockets. */ - -/* for posix fcntl() and lockf() */ -#define F_RDLCK 01 -#define F_WRLCK 02 -#define F_UNLCK 03 - -#include - -#endif diff --git a/arch/parisc/include/asm/ioctl.h b/arch/parisc/include/asm/ioctl.h deleted file mode 100644 index ec8efa02bed..00000000000 --- a/arch/parisc/include/asm/ioctl.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Linux/PA-RISC Project (http://www.parisc-linux.org/) - * Copyright (C) 1999,2003 Matthew Wilcox < willy at debian . org > - * portions from "linux/ioctl.h for Linux" by H.H. Bergman. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - - -#ifndef _ASM_PARISC_IOCTL_H -#define _ASM_PARISC_IOCTL_H - -/* ioctl command encoding: 32 bits total, command in lower 16 bits, - * size of the parameter structure in the lower 14 bits of the - * upper 16 bits. - * Encoding the size of the parameter structure in the ioctl request - * is useful for catching programs compiled with old versions - * and to avoid overwriting user space outside the user buffer area. - * The highest 2 bits are reserved for indicating the ``access mode''. - * NOTE: This limits the max parameter size to 16kB -1 ! - */ - -/* - * Direction bits. - */ -#define _IOC_NONE 0U -#define _IOC_WRITE 2U -#define _IOC_READ 1U - -#include - -#endif /* _ASM_PARISC_IOCTL_H */ diff --git a/arch/parisc/include/asm/ioctls.h b/arch/parisc/include/asm/ioctls.h deleted file mode 100644 index 054ec06f9e2..00000000000 --- a/arch/parisc/include/asm/ioctls.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef __ARCH_PARISC_IOCTLS_H__ -#define __ARCH_PARISC_IOCTLS_H__ - -#include - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS _IOR('T', 16, struct termios) /* TCGETATTR */ -#define TCSETS _IOW('T', 17, struct termios) /* TCSETATTR */ -#define TCSETSW _IOW('T', 18, struct termios) /* TCSETATTRD */ -#define TCSETSF _IOW('T', 19, struct termios) /* TCSETATTRF */ -#define TCGETA _IOR('T', 1, struct termio) -#define TCSETA _IOW('T', 2, struct termio) -#define TCSETAW _IOW('T', 3, struct termio) -#define TCSETAF _IOW('T', 4, struct termio) -#define TCSBRK _IO('T', 5) -#define TCXONC _IO('T', 6) -#define TCFLSH _IO('T', 7) -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP _IOR('T', 30, int) -#define TIOCSPGRP _IOW('T', 29, int) -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID _IOR('T', 20, int) /* Return the session ID of FD */ -#define TCGETS2 _IOR('T',0x2A, struct termios2) -#define TCSETS2 _IOW('T',0x2B, struct termios2) -#define TCSETSW2 _IOW('T',0x2C, struct termios2) -#define TCSETSF2 _IOW('T',0x2D, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ -#define TIOCGDEV _IOR('T',0x32, int) /* Get primary device node of /dev/console */ -#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ -#define TIOCVHANGUP 0x5437 - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define FIOQSIZE 0x5460 /* Get exact space used by quota */ - -#define TIOCSTART 0x5461 -#define TIOCSTOP 0x5462 -#define TIOCSLTC 0x5462 - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 -#define TIOCPKT_IOCTL 64 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* _ASM_PARISC_IOCTLS_H */ diff --git a/arch/parisc/include/asm/ipcbuf.h b/arch/parisc/include/asm/ipcbuf.h deleted file mode 100644 index bd956c42578..00000000000 --- a/arch/parisc/include/asm/ipcbuf.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef __PARISC_IPCBUF_H__ -#define __PARISC_IPCBUF_H__ - -/* - * The ipc64_perm structure for PA-RISC is almost identical to - * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the kernel. - * 'seq' has been changed from long to int so that it's the same size - * on 64-bit kernels as on 32-bit ones. - */ - -struct ipc64_perm -{ - key_t key; - uid_t uid; - gid_t gid; - uid_t cuid; - gid_t cgid; - unsigned short int __pad1; - mode_t mode; - unsigned short int __pad2; - unsigned short int seq; - unsigned int __pad3; - unsigned long long int __unused1; - unsigned long long int __unused2; -}; - -#endif /* __PARISC_IPCBUF_H__ */ diff --git a/arch/parisc/include/asm/mman.h b/arch/parisc/include/asm/mman.h deleted file mode 100644 index 12219ebce86..00000000000 --- a/arch/parisc/include/asm/mman.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef __PARISC_MMAN_H__ -#define __PARISC_MMAN_H__ - -#define PROT_READ 0x1 /* page can be read */ -#define PROT_WRITE 0x2 /* page can be written */ -#define PROT_EXEC 0x4 /* page can be executed */ -#define PROT_SEM 0x8 /* page may be used for atomic ops */ -#define PROT_NONE 0x0 /* page can not be accessed */ -#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ -#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ - -#define MAP_SHARED 0x01 /* Share changes */ -#define MAP_PRIVATE 0x02 /* Changes are private */ -#define MAP_TYPE 0x03 /* Mask for type of mapping */ -#define MAP_FIXED 0x04 /* Interpret addr exactly */ -#define MAP_ANONYMOUS 0x10 /* don't use a file */ - -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_GROWSDOWN 0x8000 /* stack-like segment */ -#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x20000 /* do not block on IO */ -#define MAP_STACK 0x40000 /* give out an address that is best suited for process/thread stacks */ -#define MAP_HUGETLB 0x80000 /* create a huge page mapping */ - -#define MS_SYNC 1 /* synchronous memory sync */ -#define MS_ASYNC 2 /* sync memory asynchronously */ -#define MS_INVALIDATE 4 /* invalidate the caches */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#define MADV_NORMAL 0 /* no further special treatment */ -#define MADV_RANDOM 1 /* expect random page references */ -#define MADV_SEQUENTIAL 2 /* expect sequential page references */ -#define MADV_WILLNEED 3 /* will need these pages */ -#define MADV_DONTNEED 4 /* don't need these pages */ -#define MADV_SPACEAVAIL 5 /* insure that resources are reserved */ -#define MADV_VPS_PURGE 6 /* Purge pages from VM page cache */ -#define MADV_VPS_INHERIT 7 /* Inherit parents page size */ - -/* common/generic parameters */ -#define MADV_REMOVE 9 /* remove these pages & resources */ -#define MADV_DONTFORK 10 /* don't inherit across fork */ -#define MADV_DOFORK 11 /* do inherit across fork */ - -/* The range 12-64 is reserved for page size specification. */ -#define MADV_4K_PAGES 12 /* Use 4K pages */ -#define MADV_16K_PAGES 14 /* Use 16K pages */ -#define MADV_64K_PAGES 16 /* Use 64K pages */ -#define MADV_256K_PAGES 18 /* Use 256K pages */ -#define MADV_1M_PAGES 20 /* Use 1 Megabyte pages */ -#define MADV_4M_PAGES 22 /* Use 4 Megabyte pages */ -#define MADV_16M_PAGES 24 /* Use 16 Megabyte pages */ -#define MADV_64M_PAGES 26 /* Use 64 Megabyte pages */ - -#define MADV_MERGEABLE 65 /* KSM may merge identical pages */ -#define MADV_UNMERGEABLE 66 /* KSM may not merge identical pages */ - -#define MADV_HUGEPAGE 67 /* Worth backing with hugepages */ -#define MADV_NOHUGEPAGE 68 /* Not worth backing with hugepages */ - -#define MADV_DONTDUMP 69 /* Explicity exclude from the core dump, - overrides the coredump filter bits */ -#define MADV_DODUMP 70 /* Clear the MADV_NODUMP flag */ - -/* compatibility flags */ -#define MAP_FILE 0 -#define MAP_VARIABLE 0 - -#endif /* __PARISC_MMAN_H__ */ diff --git a/arch/parisc/include/asm/msgbuf.h b/arch/parisc/include/asm/msgbuf.h deleted file mode 100644 index fe88f264941..00000000000 --- a/arch/parisc/include/asm/msgbuf.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef _PARISC_MSGBUF_H -#define _PARISC_MSGBUF_H - -/* - * The msqid64_ds structure for parisc architecture, copied from sparc. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; -#ifndef CONFIG_64BIT - unsigned int __pad1; -#endif - __kernel_time_t msg_stime; /* last msgsnd time */ -#ifndef CONFIG_64BIT - unsigned int __pad2; -#endif - __kernel_time_t msg_rtime; /* last msgrcv time */ -#ifndef CONFIG_64BIT - unsigned int __pad3; -#endif - __kernel_time_t msg_ctime; /* last change time */ - unsigned int msg_cbytes; /* current number of bytes on queue */ - unsigned int msg_qnum; /* number of messages in queue */ - unsigned int msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned int __unused1; - unsigned int __unused2; -}; - -#endif /* _PARISC_MSGBUF_H */ diff --git a/arch/parisc/include/asm/pdc.h b/arch/parisc/include/asm/pdc.h index 7f0f2d23059..7eb616e4bf8 100644 --- a/arch/parisc/include/asm/pdc.h +++ b/arch/parisc/include/asm/pdc.h @@ -1,348 +1,10 @@ #ifndef _PARISC_PDC_H #define _PARISC_PDC_H -/* - * PDC return values ... - * All PDC calls return a subset of these errors. - */ - -#define PDC_WARN 3 /* Call completed with a warning */ -#define PDC_REQ_ERR_1 2 /* See above */ -#define PDC_REQ_ERR_0 1 /* Call would generate a requestor error */ -#define PDC_OK 0 /* Call completed successfully */ -#define PDC_BAD_PROC -1 /* Called non-existent procedure*/ -#define PDC_BAD_OPTION -2 /* Called with non-existent option */ -#define PDC_ERROR -3 /* Call could not complete without an error */ -#define PDC_NE_MOD -5 /* Module not found */ -#define PDC_NE_CELL_MOD -7 /* Cell module not found */ -#define PDC_INVALID_ARG -10 /* Called with an invalid argument */ -#define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */ -#define PDC_NOT_NARROW -17 /* Narrow mode not supported */ - -/* - * PDC entry points... - */ - -#define PDC_POW_FAIL 1 /* perform a power-fail */ -#define PDC_POW_FAIL_PREPARE 0 /* prepare for powerfail */ - -#define PDC_CHASSIS 2 /* PDC-chassis functions */ -#define PDC_CHASSIS_DISP 0 /* update chassis display */ -#define PDC_CHASSIS_WARN 1 /* return chassis warnings */ -#define PDC_CHASSIS_DISPWARN 2 /* update&return chassis status */ -#define PDC_RETURN_CHASSIS_INFO 128 /* HVERSION dependent: return chassis LED/LCD info */ - -#define PDC_PIM 3 /* Get PIM data */ -#define PDC_PIM_HPMC 0 /* Transfer HPMC data */ -#define PDC_PIM_RETURN_SIZE 1 /* Get Max buffer needed for PIM*/ -#define PDC_PIM_LPMC 2 /* Transfer HPMC data */ -#define PDC_PIM_SOFT_BOOT 3 /* Transfer Soft Boot data */ -#define PDC_PIM_TOC 4 /* Transfer TOC data */ - -#define PDC_MODEL 4 /* PDC model information call */ -#define PDC_MODEL_INFO 0 /* returns information */ -#define PDC_MODEL_BOOTID 1 /* set the BOOT_ID */ -#define PDC_MODEL_VERSIONS 2 /* returns cpu-internal versions*/ -#define PDC_MODEL_SYSMODEL 3 /* return system model info */ -#define PDC_MODEL_ENSPEC 4 /* enable specific option */ -#define PDC_MODEL_DISPEC 5 /* disable specific option */ -#define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */ -#define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */ -/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */ -#define PDC_MODEL_OS64 (1 << 0) -#define PDC_MODEL_OS32 (1 << 1) -#define PDC_MODEL_IOPDIR_FDC (1 << 2) -#define PDC_MODEL_NVA_MASK (3 << 4) -#define PDC_MODEL_NVA_SUPPORTED (0 << 4) -#define PDC_MODEL_NVA_SLOW (1 << 4) -#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4) -#define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */ -#define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */ - -#define PA89_INSTRUCTION_SET 0x4 /* capatibilies returned */ -#define PA90_INSTRUCTION_SET 0x8 - -#define PDC_CACHE 5 /* return/set cache (& TLB) info*/ -#define PDC_CACHE_INFO 0 /* returns information */ -#define PDC_CACHE_SET_COH 1 /* set coherence state */ -#define PDC_CACHE_RET_SPID 2 /* returns space-ID bits */ - -#define PDC_HPA 6 /* return HPA of processor */ -#define PDC_HPA_PROCESSOR 0 -#define PDC_HPA_MODULES 1 - -#define PDC_COPROC 7 /* Co-Processor (usually FP unit(s)) */ -#define PDC_COPROC_CFG 0 /* Co-Processor Cfg (FP unit(s) enabled?) */ - -#define PDC_IODC 8 /* talk to IODC */ -#define PDC_IODC_READ 0 /* read IODC entry point */ -/* PDC_IODC_RI_ * INDEX parameter of PDC_IODC_READ */ -#define PDC_IODC_RI_DATA_BYTES 0 /* IODC Data Bytes */ -/* 1, 2 obsolete - HVERSION dependent*/ -#define PDC_IODC_RI_INIT 3 /* Initialize module */ -#define PDC_IODC_RI_IO 4 /* Module input/output */ -#define PDC_IODC_RI_SPA 5 /* Module input/output */ -#define PDC_IODC_RI_CONFIG 6 /* Module input/output */ -/* 7 obsolete - HVERSION dependent */ -#define PDC_IODC_RI_TEST 8 /* Module input/output */ -#define PDC_IODC_RI_TLB 9 /* Module input/output */ -#define PDC_IODC_NINIT 2 /* non-destructive init */ -#define PDC_IODC_DINIT 3 /* destructive init */ -#define PDC_IODC_MEMERR 4 /* check for memory errors */ -#define PDC_IODC_INDEX_DATA 0 /* get first 16 bytes from mod IODC */ -#define PDC_IODC_BUS_ERROR -4 /* bus error return value */ -#define PDC_IODC_INVALID_INDEX -5 /* invalid index return value */ -#define PDC_IODC_COUNT -6 /* count is too small */ - -#define PDC_TOD 9 /* time-of-day clock (TOD) */ -#define PDC_TOD_READ 0 /* read TOD */ -#define PDC_TOD_WRITE 1 /* write TOD */ - - -#define PDC_STABLE 10 /* stable storage (sprockets) */ -#define PDC_STABLE_READ 0 -#define PDC_STABLE_WRITE 1 -#define PDC_STABLE_RETURN_SIZE 2 -#define PDC_STABLE_VERIFY_CONTENTS 3 -#define PDC_STABLE_INITIALIZE 4 - -#define PDC_NVOLATILE 11 /* often not implemented */ - -#define PDC_ADD_VALID 12 /* Memory validation PDC call */ -#define PDC_ADD_VALID_VERIFY 0 /* Make PDC_ADD_VALID verify region */ - -#define PDC_INSTR 15 /* get instr to invoke PDCE_CHECK() */ - -#define PDC_PROC 16 /* (sprockets) */ - -#define PDC_CONFIG 16 /* (sprockets) */ -#define PDC_CONFIG_DECONFIG 0 -#define PDC_CONFIG_DRECONFIG 1 -#define PDC_CONFIG_DRETURN_CONFIG 2 - -#define PDC_BLOCK_TLB 18 /* manage hardware block-TLB */ -#define PDC_BTLB_INFO 0 /* returns parameter */ -#define PDC_BTLB_INSERT 1 /* insert BTLB entry */ -#define PDC_BTLB_PURGE 2 /* purge BTLB entries */ -#define PDC_BTLB_PURGE_ALL 3 /* purge all BTLB entries */ - -#define PDC_TLB 19 /* manage hardware TLB miss handling */ -#define PDC_TLB_INFO 0 /* returns parameter */ -#define PDC_TLB_SETUP 1 /* set up miss handling */ - -#define PDC_MEM 20 /* Manage memory */ -#define PDC_MEM_MEMINFO 0 -#define PDC_MEM_ADD_PAGE 1 -#define PDC_MEM_CLEAR_PDT 2 -#define PDC_MEM_READ_PDT 3 -#define PDC_MEM_RESET_CLEAR 4 -#define PDC_MEM_GOODMEM 5 -#define PDC_MEM_TABLE 128 /* Non contig mem map (sprockets) */ -#define PDC_MEM_RETURN_ADDRESS_TABLE PDC_MEM_TABLE -#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE 131 -#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES 132 -#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133 - -#define PDC_MEM_RET_SBE_REPLACED 5 /* PDC_MEM return values */ -#define PDC_MEM_RET_DUPLICATE_ENTRY 4 -#define PDC_MEM_RET_BUF_SIZE_SMALL 1 -#define PDC_MEM_RET_PDT_FULL -11 -#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL - -#define PDC_PSW 21 /* Get/Set default System Mask */ -#define PDC_PSW_MASK 0 /* Return mask */ -#define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */ -#define PDC_PSW_SET_DEFAULTS 2 /* Set default */ -#define PDC_PSW_ENDIAN_BIT 1 /* set for big endian */ -#define PDC_PSW_WIDE_BIT 2 /* set for wide mode */ - -#define PDC_SYSTEM_MAP 22 /* find system modules */ -#define PDC_FIND_MODULE 0 -#define PDC_FIND_ADDRESS 1 -#define PDC_TRANSLATE_PATH 2 - -#define PDC_SOFT_POWER 23 /* soft power switch */ -#define PDC_SOFT_POWER_INFO 0 /* return info about the soft power switch */ -#define PDC_SOFT_POWER_ENABLE 1 /* enable/disable soft power switch */ - - -/* HVERSION dependent */ - -/* The PDC_MEM_MAP calls */ -#define PDC_MEM_MAP 128 /* on s700: return page info */ -#define PDC_MEM_MAP_HPA 0 /* returns hpa of a module */ - -#define PDC_EEPROM 129 /* EEPROM access */ -#define PDC_EEPROM_READ_WORD 0 -#define PDC_EEPROM_WRITE_WORD 1 -#define PDC_EEPROM_READ_BYTE 2 -#define PDC_EEPROM_WRITE_BYTE 3 -#define PDC_EEPROM_EEPROM_PASSWORD -1000 - -#define PDC_NVM 130 /* NVM (non-volatile memory) access */ -#define PDC_NVM_READ_WORD 0 -#define PDC_NVM_WRITE_WORD 1 -#define PDC_NVM_READ_BYTE 2 -#define PDC_NVM_WRITE_BYTE 3 - -#define PDC_SEED_ERROR 132 /* (sprockets) */ - -#define PDC_IO 135 /* log error info, reset IO system */ -#define PDC_IO_READ_AND_CLEAR_ERRORS 0 -#define PDC_IO_RESET 1 -#define PDC_IO_RESET_DEVICES 2 -/* sets bits 6&7 (little endian) of the HcControl Register */ -#define PDC_IO_USB_SUSPEND 0xC000000000000000 -#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5 /* return value */ -#define PDC_IO_NO_SUSPEND -6 /* return value */ - -#define PDC_BROADCAST_RESET 136 /* reset all processors */ -#define PDC_DO_RESET 0 /* option: perform a broadcast reset */ -#define PDC_DO_FIRM_TEST_RESET 1 /* Do broadcast reset with bitmap */ -#define PDC_BR_RECONFIGURATION 2 /* reset w/reconfiguration */ -#define PDC_FIRM_TEST_MAGIC 0xab9ec36fUL /* for this reboot only */ - -#define PDC_LAN_STATION_ID 138 /* Hversion dependent mechanism for */ -#define PDC_LAN_STATION_ID_READ 0 /* getting the lan station address */ - -#define PDC_LAN_STATION_ID_SIZE 6 - -#define PDC_CHECK_RANGES 139 /* (sprockets) */ - -#define PDC_NV_SECTIONS 141 /* (sprockets) */ - -#define PDC_PERFORMANCE 142 /* performance monitoring */ - -#define PDC_SYSTEM_INFO 143 /* system information */ -#define PDC_SYSINFO_RETURN_INFO_SIZE 0 -#define PDC_SYSINFO_RRETURN_SYS_INFO 1 -#define PDC_SYSINFO_RRETURN_ERRORS 2 -#define PDC_SYSINFO_RRETURN_WARNINGS 3 -#define PDC_SYSINFO_RETURN_REVISIONS 4 -#define PDC_SYSINFO_RRETURN_DIAGNOSE 5 -#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005 - -#define PDC_RDR 144 /* (sprockets) */ -#define PDC_RDR_READ_BUFFER 0 -#define PDC_RDR_READ_SINGLE 1 -#define PDC_RDR_WRITE_SINGLE 2 - -#define PDC_INTRIGUE 145 /* (sprockets) */ -#define PDC_INTRIGUE_WRITE_BUFFER 0 -#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1 -#define PDC_INTRIGUE_START_CPU_COUNTERS 2 -#define PDC_INTRIGUE_STOP_CPU_COUNTERS 3 - -#define PDC_STI 146 /* STI access */ -/* same as PDC_PCI_XXX values (see below) */ - -/* Legacy PDC definitions for same stuff */ -#define PDC_PCI_INDEX 147 -#define PDC_PCI_INTERFACE_INFO 0 -#define PDC_PCI_SLOT_INFO 1 -#define PDC_PCI_INFLIGHT_BYTES 2 -#define PDC_PCI_READ_CONFIG 3 -#define PDC_PCI_WRITE_CONFIG 4 -#define PDC_PCI_READ_PCI_IO 5 -#define PDC_PCI_WRITE_PCI_IO 6 -#define PDC_PCI_READ_CONFIG_DELAY 7 -#define PDC_PCI_UPDATE_CONFIG_DELAY 8 -#define PDC_PCI_PCI_PATH_TO_PCI_HPA 9 -#define PDC_PCI_PCI_HPA_TO_PCI_PATH 10 -#define PDC_PCI_PCI_PATH_TO_PCI_BUS 11 -#define PDC_PCI_PCI_RESERVED 12 -#define PDC_PCI_PCI_INT_ROUTE_SIZE 13 -#define PDC_PCI_GET_INT_TBL_SIZE PDC_PCI_PCI_INT_ROUTE_SIZE -#define PDC_PCI_PCI_INT_ROUTE 14 -#define PDC_PCI_GET_INT_TBL PDC_PCI_PCI_INT_ROUTE -#define PDC_PCI_READ_MON_TYPE 15 -#define PDC_PCI_WRITE_MON_TYPE 16 - - -/* Get SCSI Interface Card info: SDTR, SCSI ID, mode (SE vs LVD) */ -#define PDC_INITIATOR 163 -#define PDC_GET_INITIATOR 0 -#define PDC_SET_INITIATOR 1 -#define PDC_DELETE_INITIATOR 2 -#define PDC_RETURN_TABLE_SIZE 3 -#define PDC_RETURN_TABLE 4 - -#define PDC_LINK 165 /* (sprockets) */ -#define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */ -#define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */ - -/* cl_class - * page 3-33 of IO-Firmware ARS - * IODC ENTRY_INIT(Search first) RET[1] - */ -#define CL_NULL 0 /* invalid */ -#define CL_RANDOM 1 /* random access (as disk) */ -#define CL_SEQU 2 /* sequential access (as tape) */ -#define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */ -#define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */ -#define CL_DISPL 9 /* half-duplex console (display) */ -#define CL_FC 10 /* FiberChannel access media */ - -/* IODC ENTRY_INIT() */ -#define ENTRY_INIT_SRCH_FRST 2 -#define ENTRY_INIT_SRCH_NEXT 3 -#define ENTRY_INIT_MOD_DEV 4 -#define ENTRY_INIT_DEV 5 -#define ENTRY_INIT_MOD 6 -#define ENTRY_INIT_MSG 9 - -/* IODC ENTRY_IO() */ -#define ENTRY_IO_BOOTIN 0 -#define ENTRY_IO_BOOTOUT 1 -#define ENTRY_IO_CIN 2 -#define ENTRY_IO_COUT 3 -#define ENTRY_IO_CLOSE 4 -#define ENTRY_IO_GETMSG 9 -#define ENTRY_IO_BBLOCK_IN 16 -#define ENTRY_IO_BBLOCK_OUT 17 - -/* IODC ENTRY_SPA() */ - -/* IODC ENTRY_CONFIG() */ - -/* IODC ENTRY_TEST() */ - -/* IODC ENTRY_TLB() */ - -/* constants for OS (NVM...) */ -#define OS_ID_NONE 0 /* Undefined OS ID */ -#define OS_ID_HPUX 1 /* HP-UX OS */ -#define OS_ID_MPEXL 2 /* MPE XL OS */ -#define OS_ID_OSF 3 /* OSF OS */ -#define OS_ID_HPRT 4 /* HP-RT OS */ -#define OS_ID_NOVEL 5 /* NOVELL OS */ -#define OS_ID_LINUX 6 /* Linux */ - - -/* constants for PDC_CHASSIS */ -#define OSTAT_OFF 0 -#define OSTAT_FLT 1 -#define OSTAT_TEST 2 -#define OSTAT_INIT 3 -#define OSTAT_SHUT 4 -#define OSTAT_WARN 5 -#define OSTAT_RUN 6 -#define OSTAT_ON 7 - -/* Page Zero constant offsets used by the HPMC handler */ -#define BOOT_CONSOLE_HPA_OFFSET 0x3c0 -#define BOOT_CONSOLE_SPA_OFFSET 0x3c4 -#define BOOT_CONSOLE_PATH_OFFSET 0x3a8 - -/* size of the pdc_result buffer for firmware.c */ -#define NUM_PDC_RESULT 32 +#include #if !defined(__ASSEMBLY__) -#include - -#ifdef __KERNEL__ - extern int pdc_type; /* Values for pdc_type */ @@ -673,88 +335,5 @@ static inline char * os_id_to_string(u16 os_id) { } } -#endif /* __KERNEL__ */ - -/* flags of the device_path */ -#define PF_AUTOBOOT 0x80 -#define PF_AUTOSEARCH 0x40 -#define PF_TIMER 0x0F - -struct device_path { /* page 1-69 */ - unsigned char flags; /* flags see above! */ - unsigned char bc[6]; /* bus converter routing info */ - unsigned char mod; - unsigned int layers[6];/* device-specific layer-info */ -} __attribute__((aligned(8))) ; - -struct pz_device { - struct device_path dp; /* see above */ - /* struct iomod *hpa; */ - unsigned int hpa; /* HPA base address */ - /* char *spa; */ - unsigned int spa; /* SPA base address */ - /* int (*iodc_io)(struct iomod*, ...); */ - unsigned int iodc_io; /* device entry point */ - short pad; /* reserved */ - unsigned short cl_class;/* see below */ -} __attribute__((aligned(8))) ; - -struct zeropage { - /* [0x000] initialize vectors (VEC) */ - unsigned int vec_special; /* must be zero */ - /* int (*vec_pow_fail)(void);*/ - unsigned int vec_pow_fail; /* power failure handler */ - /* int (*vec_toc)(void); */ - unsigned int vec_toc; - unsigned int vec_toclen; - /* int (*vec_rendz)(void); */ - unsigned int vec_rendz; - int vec_pow_fail_flen; - int vec_pad[10]; - - /* [0x040] reserved processor dependent */ - int pad0[112]; - - /* [0x200] reserved */ - int pad1[84]; - - /* [0x350] memory configuration (MC) */ - int memc_cont; /* contiguous mem size (bytes) */ - int memc_phsize; /* physical memory size */ - int memc_adsize; /* additional mem size, bytes of SPA space used by PDC */ - unsigned int mem_pdc_hi; /* used for 64-bit */ - - /* [0x360] various parameters for the boot-CPU */ - /* unsigned int *mem_booterr[8]; */ - unsigned int mem_booterr[8]; /* ptr to boot errors */ - unsigned int mem_free; /* first location, where OS can be loaded */ - /* struct iomod *mem_hpa; */ - unsigned int mem_hpa; /* HPA of the boot-CPU */ - /* int (*mem_pdc)(int, ...); */ - unsigned int mem_pdc; /* PDC entry point */ - unsigned int mem_10msec; /* number of clock ticks in 10msec */ - - /* [0x390] initial memory module (IMM) */ - /* struct iomod *imm_hpa; */ - unsigned int imm_hpa; /* HPA of the IMM */ - int imm_soft_boot; /* 0 = was hard boot, 1 = was soft boot */ - unsigned int imm_spa_size; /* SPA size of the IMM in bytes */ - unsigned int imm_max_mem; /* bytes of mem in IMM */ - - /* [0x3A0] boot console, display device and keyboard */ - struct pz_device mem_cons; /* description of console device */ - struct pz_device mem_boot; /* description of boot device */ - struct pz_device mem_kbd; /* description of keyboard device */ - - /* [0x430] reserved */ - int pad430[116]; - - /* [0x600] processor dependent */ - __u32 pad600[1]; - __u32 proc_sti; /* pointer to STI ROM */ - __u32 pad608[126]; -}; - #endif /* !defined(__ASSEMBLY__) */ - #endif /* _PARISC_PDC_H */ diff --git a/arch/parisc/include/asm/posix_types.h b/arch/parisc/include/asm/posix_types.h deleted file mode 100644 index b9344256f76..00000000000 --- a/arch/parisc/include/asm/posix_types.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef __ARCH_PARISC_POSIX_TYPES_H -#define __ARCH_PARISC_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned short __kernel_mode_t; -#define __kernel_mode_t __kernel_mode_t - -typedef unsigned short __kernel_ipc_pid_t; -#define __kernel_ipc_pid_t __kernel_ipc_pid_t - -typedef int __kernel_suseconds_t; -#define __kernel_suseconds_t __kernel_suseconds_t - -typedef long long __kernel_off64_t; -typedef unsigned long long __kernel_ino64_t; - -#include - -#endif diff --git a/arch/parisc/include/asm/ptrace.h b/arch/parisc/include/asm/ptrace.h index 250ae35aa06..a2db278a5de 100644 --- a/arch/parisc/include/asm/ptrace.h +++ b/arch/parisc/include/asm/ptrace.h @@ -1,49 +1,11 @@ -#ifndef _PARISC_PTRACE_H -#define _PARISC_PTRACE_H - /* written by Philipp Rumpf, Copyright (C) 1999 SuSE GmbH Nuernberg ** Copyright (C) 2000 Grant Grundler, Hewlett-Packard */ +#ifndef _PARISC_PTRACE_H +#define _PARISC_PTRACE_H -#include - -/* This struct defines the way the registers are stored on the - * stack during a system call. - * - * N.B. gdb/strace care about the size and offsets within this - * structure. If you change things, you may break object compatibility - * for those applications. - */ - -struct pt_regs { - unsigned long gr[32]; /* PSW is in gr[0] */ - __u64 fr[32]; - unsigned long sr[ 8]; - unsigned long iasq[2]; - unsigned long iaoq[2]; - unsigned long cr27; - unsigned long pad0; /* available for other uses */ - unsigned long orig_r28; - unsigned long ksp; - unsigned long kpc; - unsigned long sar; /* CR11 */ - unsigned long iir; /* CR19 */ - unsigned long isr; /* CR20 */ - unsigned long ior; /* CR21 */ - unsigned long ipsw; /* CR22 */ -}; - -/* - * The numbers chosen here are somewhat arbitrary but absolutely MUST - * not overlap with any of the number assigned in . - * - * These ones are taken from IA-64 on the assumption that theirs are - * the most correct (and we also want to support PTRACE_SINGLEBLOCK - * since we have taken branch traps too) - */ -#define PTRACE_SINGLEBLOCK 12 /* resume execution until next branch */ +#include -#ifdef __KERNEL__ #define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS)) @@ -58,6 +20,4 @@ struct pt_regs { unsigned long profile_pc(struct pt_regs *); -#endif /* __KERNEL__ */ - #endif diff --git a/arch/parisc/include/asm/resource.h b/arch/parisc/include/asm/resource.h deleted file mode 100644 index 8b06343b62e..00000000000 --- a/arch/parisc/include/asm/resource.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _ASM_PARISC_RESOURCE_H -#define _ASM_PARISC_RESOURCE_H - -#define _STK_LIM_MAX 10 * _STK_LIM -#include - -#endif diff --git a/arch/parisc/include/asm/sembuf.h b/arch/parisc/include/asm/sembuf.h deleted file mode 100644 index 1e59ffd3bd1..00000000000 --- a/arch/parisc/include/asm/sembuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _PARISC_SEMBUF_H -#define _PARISC_SEMBUF_H - -/* - * The semid64_ds structure for parisc architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ -#ifndef CONFIG_64BIT - unsigned int __pad1; -#endif - __kernel_time_t sem_otime; /* last semop time */ -#ifndef CONFIG_64BIT - unsigned int __pad2; -#endif - __kernel_time_t sem_ctime; /* last change time */ - unsigned int sem_nsems; /* no. of semaphores in array */ - unsigned int __unused1; - unsigned int __unused2; -}; - -#endif /* _PARISC_SEMBUF_H */ diff --git a/arch/parisc/include/asm/setup.h b/arch/parisc/include/asm/setup.h deleted file mode 100644 index 7da2e5b8747..00000000000 --- a/arch/parisc/include/asm/setup.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _PARISC_SETUP_H -#define _PARISC_SETUP_H - -#define COMMAND_LINE_SIZE 1024 - -#endif /* _PARISC_SETUP_H */ diff --git a/arch/parisc/include/asm/shmbuf.h b/arch/parisc/include/asm/shmbuf.h deleted file mode 100644 index 0a3eada1863..00000000000 --- a/arch/parisc/include/asm/shmbuf.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef _PARISC_SHMBUF_H -#define _PARISC_SHMBUF_H - -/* - * The shmid64_ds structure for parisc architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ -#ifndef CONFIG_64BIT - unsigned int __pad1; -#endif - __kernel_time_t shm_atime; /* last attach time */ -#ifndef CONFIG_64BIT - unsigned int __pad2; -#endif - __kernel_time_t shm_dtime; /* last detach time */ -#ifndef CONFIG_64BIT - unsigned int __pad3; -#endif - __kernel_time_t shm_ctime; /* last change time */ -#ifndef CONFIG_64BIT - unsigned int __pad4; -#endif - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned int shm_nattch; /* no. of current attaches */ - unsigned int __unused1; - unsigned int __unused2; -}; - -#ifdef CONFIG_64BIT -/* The 'unsigned int' (formerly 'unsigned long') data types below will - * ensure that a 32-bit app calling shmctl(*,IPC_INFO,*) will work on - * a wide kernel, but if some of these values are meant to contain pointers - * they may need to be 'long long' instead. -PB XXX FIXME - */ -#endif -struct shminfo64 { - unsigned int shmmax; - unsigned int shmmin; - unsigned int shmmni; - unsigned int shmseg; - unsigned int shmall; - unsigned int __unused1; - unsigned int __unused2; - unsigned int __unused3; - unsigned int __unused4; -}; - -#endif /* _PARISC_SHMBUF_H */ diff --git a/arch/parisc/include/asm/sigcontext.h b/arch/parisc/include/asm/sigcontext.h deleted file mode 100644 index 27ef31bb3b6..00000000000 --- a/arch/parisc/include/asm/sigcontext.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef _ASMPARISC_SIGCONTEXT_H -#define _ASMPARISC_SIGCONTEXT_H - -#define PARISC_SC_FLAG_ONSTACK 1<<0 -#define PARISC_SC_FLAG_IN_SYSCALL 1<<1 - -/* We will add more stuff here as it becomes necessary, until we know - it works. */ -struct sigcontext { - unsigned long sc_flags; - - unsigned long sc_gr[32]; /* PSW in sc_gr[0] */ - unsigned long long sc_fr[32]; /* FIXME, do we need other state info? */ - unsigned long sc_iasq[2]; - unsigned long sc_iaoq[2]; - unsigned long sc_sar; /* cr11 */ -}; - - -#endif diff --git a/arch/parisc/include/asm/siginfo.h b/arch/parisc/include/asm/siginfo.h deleted file mode 100644 index d7034728f37..00000000000 --- a/arch/parisc/include/asm/siginfo.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _PARISC_SIGINFO_H -#define _PARISC_SIGINFO_H - -#include - -#undef NSIGTRAP -#define NSIGTRAP 4 - -#endif diff --git a/arch/parisc/include/asm/signal.h b/arch/parisc/include/asm/signal.h index c20356375d1..21abf4fc169 100644 --- a/arch/parisc/include/asm/signal.h +++ b/arch/parisc/include/asm/signal.h @@ -1,129 +1,19 @@ #ifndef _ASM_PARISC_SIGNAL_H #define _ASM_PARISC_SIGNAL_H -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGEMT 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGBUS 10 -#define SIGSEGV 11 -#define SIGSYS 12 /* Linux doesn't use this */ -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGUSR1 16 -#define SIGUSR2 17 -#define SIGCHLD 18 -#define SIGPWR 19 -#define SIGVTALRM 20 -#define SIGPROF 21 -#define SIGIO 22 -#define SIGPOLL SIGIO -#define SIGWINCH 23 -#define SIGSTOP 24 -#define SIGTSTP 25 -#define SIGCONT 26 -#define SIGTTIN 27 -#define SIGTTOU 28 -#define SIGURG 29 -#define SIGLOST 30 /* Linux doesn't use this either */ -#define SIGUNUSED 31 -#define SIGRESERVE SIGUNUSED +#include -#define SIGXCPU 33 -#define SIGXFSZ 34 -#define SIGSTKFLT 36 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 37 -#define SIGRTMAX _NSIG /* it's 44 under HP/UX */ - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_ONSTACK 0x00000001 -#define SA_RESETHAND 0x00000004 -#define SA_NOCLDSTOP 0x00000008 -#define SA_SIGINFO 0x00000010 -#define SA_NODEFER 0x00000020 -#define SA_RESTART 0x00000040 -#define SA_NOCLDWAIT 0x00000080 -#define _SA_SIGGFAULT 0x00000100 /* HPUX */ - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 /* obsolete -- ignored */ - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#ifdef __KERNEL__ #define _NSIG 64 /* bits-per-word, where word apparently means 'long' not 'int' */ #define _NSIG_BPW BITS_PER_LONG #define _NSIG_WORDS (_NSIG / _NSIG_BPW) -#endif /* __KERNEL__ */ - -#define SIG_BLOCK 0 /* for blocking signals */ -#define SIG_UNBLOCK 1 /* for unblocking signals */ -#define SIG_SETMASK 2 /* for setting the signal mask */ - -#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ -#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ -#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ - # ifndef __ASSEMBLY__ - -# include - -/* Avoid too many header ordering problems. */ -struct siginfo; - -/* Type of a signal handler. */ #ifdef CONFIG_64BIT -/* function pointers on 64-bit parisc are pointers to little structs and the - * compiler doesn't support code which changes or tests the address of - * the function in the little struct. This is really ugly -PB - */ -typedef char __user *__sighandler_t; #else -typedef void __signalfn_t(int); -typedef __signalfn_t __user *__sighandler_t; #endif -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ - /* Most things should be clean enough to redefine this at will, if care is taken to make libc match. */ @@ -148,6 +38,5 @@ struct k_sigaction { #include -#endif /* __KERNEL__ */ #endif /* !__ASSEMBLY */ #endif /* _ASM_PARISC_SIGNAL_H */ diff --git a/arch/parisc/include/asm/socket.h b/arch/parisc/include/asm/socket.h deleted file mode 100644 index 1b52c2c31a7..00000000000 --- a/arch/parisc/include/asm/socket.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 0xffff - -#define SO_DEBUG 0x0001 -#define SO_REUSEADDR 0x0004 -#define SO_KEEPALIVE 0x0008 -#define SO_DONTROUTE 0x0010 -#define SO_BROADCAST 0x0020 -#define SO_LINGER 0x0080 -#define SO_OOBINLINE 0x0100 -/* To add :#define SO_REUSEPORT 0x0200 */ -#define SO_SNDBUF 0x1001 -#define SO_RCVBUF 0x1002 -#define SO_SNDBUFFORCE 0x100a -#define SO_RCVBUFFORCE 0x100b -#define SO_SNDLOWAT 0x1003 -#define SO_RCVLOWAT 0x1004 -#define SO_SNDTIMEO 0x1005 -#define SO_RCVTIMEO 0x1006 -#define SO_ERROR 0x1007 -#define SO_TYPE 0x1008 -#define SO_PROTOCOL 0x1028 -#define SO_DOMAIN 0x1029 -#define SO_PEERNAME 0x2000 - -#define SO_NO_CHECK 0x400b -#define SO_PRIORITY 0x400c -#define SO_BSDCOMPAT 0x400e -#define SO_PASSCRED 0x4010 -#define SO_PEERCRED 0x4011 -#define SO_TIMESTAMP 0x4012 -#define SCM_TIMESTAMP SO_TIMESTAMP -#define SO_TIMESTAMPNS 0x4013 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 0x4016 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 0x4017 -#define SO_SECURITY_ENCRYPTION_NETWORK 0x4018 - -#define SO_BINDTODEVICE 0x4019 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 0x401a -#define SO_DETACH_FILTER 0x401b - -#define SO_ACCEPTCONN 0x401c - -#define SO_PEERSEC 0x401d -#define SO_PASSSEC 0x401e - -#define SO_MARK 0x401f - -#define SO_TIMESTAMPING 0x4020 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#define SO_RXQ_OVFL 0x4021 - -#define SO_WIFI_STATUS 0x4022 -#define SCM_WIFI_STATUS SO_WIFI_STATUS -#define SO_PEEK_OFF 0x4023 - -/* Instruct lower device to use last 4-bytes of skb data as FCS */ -#define SO_NOFCS 0x4024 - - -/* O_NONBLOCK clashes with the bits used for socket types. Therefore we - * have to define SOCK_NONBLOCK to a different value here. - */ -#define SOCK_NONBLOCK 0x40000000 - -#endif /* _ASM_SOCKET_H */ diff --git a/arch/parisc/include/asm/sockios.h b/arch/parisc/include/asm/sockios.h deleted file mode 100644 index dabfbc7483f..00000000000 --- a/arch/parisc/include/asm/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ARCH_PARISC_SOCKIOS__ -#define __ARCH_PARISC_SOCKIOS__ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif diff --git a/arch/parisc/include/asm/stat.h b/arch/parisc/include/asm/stat.h deleted file mode 100644 index d76fbda5d62..00000000000 --- a/arch/parisc/include/asm/stat.h +++ /dev/null @@ -1,100 +0,0 @@ -#ifndef _PARISC_STAT_H -#define _PARISC_STAT_H - -#include - -struct stat { - unsigned int st_dev; /* dev_t is 32 bits on parisc */ - ino_t st_ino; /* 32 bits */ - mode_t st_mode; /* 16 bits */ - unsigned short st_nlink; /* 16 bits */ - unsigned short st_reserved1; /* old st_uid */ - unsigned short st_reserved2; /* old st_gid */ - unsigned int st_rdev; - off_t st_size; - time_t st_atime; - unsigned int st_atime_nsec; - time_t st_mtime; - unsigned int st_mtime_nsec; - time_t st_ctime; - unsigned int st_ctime_nsec; - int st_blksize; - int st_blocks; - unsigned int __unused1; /* ACL stuff */ - unsigned int __unused2; /* network */ - ino_t __unused3; /* network */ - unsigned int __unused4; /* cnodes */ - unsigned short __unused5; /* netsite */ - short st_fstype; - unsigned int st_realdev; - unsigned short st_basemode; - unsigned short st_spareshort; - uid_t st_uid; - gid_t st_gid; - unsigned int st_spare4[3]; -}; - -#define STAT_HAVE_NSEC - -typedef __kernel_off64_t off64_t; - -struct hpux_stat64 { - unsigned int st_dev; /* dev_t is 32 bits on parisc */ - ino_t st_ino; /* 32 bits */ - mode_t st_mode; /* 16 bits */ - unsigned short st_nlink; /* 16 bits */ - unsigned short st_reserved1; /* old st_uid */ - unsigned short st_reserved2; /* old st_gid */ - unsigned int st_rdev; - off64_t st_size; - time_t st_atime; - unsigned int st_spare1; - time_t st_mtime; - unsigned int st_spare2; - time_t st_ctime; - unsigned int st_spare3; - int st_blksize; - __u64 st_blocks; - unsigned int __unused1; /* ACL stuff */ - unsigned int __unused2; /* network */ - ino_t __unused3; /* network */ - unsigned int __unused4; /* cnodes */ - unsigned short __unused5; /* netsite */ - short st_fstype; - unsigned int st_realdev; - unsigned short st_basemode; - unsigned short st_spareshort; - uid_t st_uid; - gid_t st_gid; - unsigned int st_spare4[3]; -}; - -/* This is the struct that 32-bit userspace applications are expecting. - * How 64-bit apps are going to be compiled, I have no idea. But at least - * this way, we don't have a wrapper in the kernel. - */ -struct stat64 { - unsigned long long st_dev; - unsigned int __pad1; - - unsigned int __st_ino; /* Not actually filled in */ - unsigned int st_mode; - unsigned int st_nlink; - unsigned int st_uid; - unsigned int st_gid; - unsigned long long st_rdev; - unsigned int __pad2; - signed long long st_size; - signed int st_blksize; - - signed long long st_blocks; - signed int st_atime; - unsigned int st_atime_nsec; - signed int st_mtime; - unsigned int st_mtime_nsec; - signed int st_ctime; - unsigned int st_ctime_nsec; - unsigned long long st_ino; -}; - -#endif diff --git a/arch/parisc/include/asm/statfs.h b/arch/parisc/include/asm/statfs.h deleted file mode 100644 index 324bea905dc..00000000000 --- a/arch/parisc/include/asm/statfs.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _PARISC_STATFS_H -#define _PARISC_STATFS_H - -#define __statfs_word long -#include - -#endif diff --git a/arch/parisc/include/asm/swab.h b/arch/parisc/include/asm/swab.h deleted file mode 100644 index e78403b129e..00000000000 --- a/arch/parisc/include/asm/swab.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef _PARISC_SWAB_H -#define _PARISC_SWAB_H - -#include -#include - -#define __SWAB_64_THRU_32__ - -static inline __attribute_const__ __u16 __arch_swab16(__u16 x) -{ - __asm__("dep %0, 15, 8, %0\n\t" /* deposit 00ab -> 0bab */ - "shd %%r0, %0, 8, %0" /* shift 000000ab -> 00ba */ - : "=r" (x) - : "0" (x)); - return x; -} -#define __arch_swab16 __arch_swab16 - -static inline __attribute_const__ __u32 __arch_swab24(__u32 x) -{ - __asm__("shd %0, %0, 8, %0\n\t" /* shift xabcxabc -> cxab */ - "dep %0, 15, 8, %0\n\t" /* deposit cxab -> cbab */ - "shd %%r0, %0, 8, %0" /* shift 0000cbab -> 0cba */ - : "=r" (x) - : "0" (x)); - return x; -} - -static inline __attribute_const__ __u32 __arch_swab32(__u32 x) -{ - unsigned int temp; - __asm__("shd %0, %0, 16, %1\n\t" /* shift abcdabcd -> cdab */ - "dep %1, 15, 8, %1\n\t" /* deposit cdab -> cbab */ - "shd %0, %1, 8, %0" /* shift abcdcbab -> dcba */ - : "=r" (x), "=&r" (temp) - : "0" (x)); - return x; -} -#define __arch_swab32 __arch_swab32 - -#if BITS_PER_LONG > 32 -/* -** From "PA-RISC 2.0 Architecture", HP Professional Books. -** See Appendix I page 8 , "Endian Byte Swapping". -** -** Pretty cool algorithm: (* == zero'd bits) -** PERMH 01234567 -> 67452301 into %0 -** HSHL 67452301 -> 7*5*3*1* into %1 -** HSHR 67452301 -> *6*4*2*0 into %0 -** OR %0 | %1 -> 76543210 into %0 (all done!) -*/ -static inline __attribute_const__ __u64 __arch_swab64(__u64 x) -{ - __u64 temp; - __asm__("permh,3210 %0, %0\n\t" - "hshl %0, 8, %1\n\t" - "hshr,u %0, 8, %0\n\t" - "or %1, %0, %0" - : "=r" (x), "=&r" (temp) - : "0" (x)); - return x; -} -#define __arch_swab64 __arch_swab64 -#endif /* BITS_PER_LONG > 32 */ - -#endif /* _PARISC_SWAB_H */ diff --git a/arch/parisc/include/asm/termbits.h b/arch/parisc/include/asm/termbits.h deleted file mode 100644 index d1ab92177a5..00000000000 --- a/arch/parisc/include/asm/termbits.h +++ /dev/null @@ -1,201 +0,0 @@ -#ifndef __ARCH_PARISC_TERMBITS_H__ -#define __ARCH_PARISC_TERMBITS_H__ - -#include - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0040000 -#define IUTF8 0100000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif diff --git a/arch/parisc/include/asm/termios.h b/arch/parisc/include/asm/termios.h index a2a57a4548a..9bbc0c8974e 100644 --- a/arch/parisc/include/asm/termios.h +++ b/arch/parisc/include/asm/termios.h @@ -1,45 +1,8 @@ #ifndef _PARISC_TERMIOS_H #define _PARISC_TERMIOS_H -#include -#include +#include -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ /* intr=^C quit=^\ erase=del kill=^U eof=^D vtime=\0 vmin=\1 sxtc=\0 @@ -85,6 +48,4 @@ struct termio { #define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) #define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) -#endif /* __KERNEL__ */ - #endif /* _PARISC_TERMIOS_H */ diff --git a/arch/parisc/include/asm/types.h b/arch/parisc/include/asm/types.h deleted file mode 100644 index 8866f9bbdea..00000000000 --- a/arch/parisc/include/asm/types.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _PARISC_TYPES_H -#define _PARISC_TYPES_H - -#include - -#endif diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h index d61de64f990..541639c3f60 100644 --- a/arch/parisc/include/asm/unistd.h +++ b/arch/parisc/include/asm/unistd.h @@ -1,840 +1,8 @@ #ifndef _ASM_PARISC_UNISTD_H_ #define _ASM_PARISC_UNISTD_H_ -/* - * This file contains the system call numbers. - */ - -/* - * HP-UX system calls get their native numbers for binary compatibility. - */ - -#define __NR_HPUX_exit 1 -#define __NR_HPUX_fork 2 -#define __NR_HPUX_read 3 -#define __NR_HPUX_write 4 -#define __NR_HPUX_open 5 -#define __NR_HPUX_close 6 -#define __NR_HPUX_wait 7 -#define __NR_HPUX_creat 8 -#define __NR_HPUX_link 9 -#define __NR_HPUX_unlink 10 -#define __NR_HPUX_execv 11 -#define __NR_HPUX_chdir 12 -#define __NR_HPUX_time 13 -#define __NR_HPUX_mknod 14 -#define __NR_HPUX_chmod 15 -#define __NR_HPUX_chown 16 -#define __NR_HPUX_break 17 -#define __NR_HPUX_lchmod 18 -#define __NR_HPUX_lseek 19 -#define __NR_HPUX_getpid 20 -#define __NR_HPUX_mount 21 -#define __NR_HPUX_umount 22 -#define __NR_HPUX_setuid 23 -#define __NR_HPUX_getuid 24 -#define __NR_HPUX_stime 25 -#define __NR_HPUX_ptrace 26 -#define __NR_HPUX_alarm 27 -#define __NR_HPUX_oldfstat 28 -#define __NR_HPUX_pause 29 -#define __NR_HPUX_utime 30 -#define __NR_HPUX_stty 31 -#define __NR_HPUX_gtty 32 -#define __NR_HPUX_access 33 -#define __NR_HPUX_nice 34 -#define __NR_HPUX_ftime 35 -#define __NR_HPUX_sync 36 -#define __NR_HPUX_kill 37 -#define __NR_HPUX_stat 38 -#define __NR_HPUX_setpgrp3 39 -#define __NR_HPUX_lstat 40 -#define __NR_HPUX_dup 41 -#define __NR_HPUX_pipe 42 -#define __NR_HPUX_times 43 -#define __NR_HPUX_profil 44 -#define __NR_HPUX_ki_call 45 -#define __NR_HPUX_setgid 46 -#define __NR_HPUX_getgid 47 -#define __NR_HPUX_sigsys 48 -#define __NR_HPUX_reserved1 49 -#define __NR_HPUX_reserved2 50 -#define __NR_HPUX_acct 51 -#define __NR_HPUX_set_userthreadid 52 -#define __NR_HPUX_oldlock 53 -#define __NR_HPUX_ioctl 54 -#define __NR_HPUX_reboot 55 -#define __NR_HPUX_symlink 56 -#define __NR_HPUX_utssys 57 -#define __NR_HPUX_readlink 58 -#define __NR_HPUX_execve 59 -#define __NR_HPUX_umask 60 -#define __NR_HPUX_chroot 61 -#define __NR_HPUX_fcntl 62 -#define __NR_HPUX_ulimit 63 -#define __NR_HPUX_getpagesize 64 -#define __NR_HPUX_mremap 65 -#define __NR_HPUX_vfork 66 -#define __NR_HPUX_vread 67 -#define __NR_HPUX_vwrite 68 -#define __NR_HPUX_sbrk 69 -#define __NR_HPUX_sstk 70 -#define __NR_HPUX_mmap 71 -#define __NR_HPUX_vadvise 72 -#define __NR_HPUX_munmap 73 -#define __NR_HPUX_mprotect 74 -#define __NR_HPUX_madvise 75 -#define __NR_HPUX_vhangup 76 -#define __NR_HPUX_swapoff 77 -#define __NR_HPUX_mincore 78 -#define __NR_HPUX_getgroups 79 -#define __NR_HPUX_setgroups 80 -#define __NR_HPUX_getpgrp2 81 -#define __NR_HPUX_setpgrp2 82 -#define __NR_HPUX_setitimer 83 -#define __NR_HPUX_wait3 84 -#define __NR_HPUX_swapon 85 -#define __NR_HPUX_getitimer 86 -#define __NR_HPUX_gethostname42 87 -#define __NR_HPUX_sethostname42 88 -#define __NR_HPUX_getdtablesize 89 -#define __NR_HPUX_dup2 90 -#define __NR_HPUX_getdopt 91 -#define __NR_HPUX_fstat 92 -#define __NR_HPUX_select 93 -#define __NR_HPUX_setdopt 94 -#define __NR_HPUX_fsync 95 -#define __NR_HPUX_setpriority 96 -#define __NR_HPUX_socket_old 97 -#define __NR_HPUX_connect_old 98 -#define __NR_HPUX_accept_old 99 -#define __NR_HPUX_getpriority 100 -#define __NR_HPUX_send_old 101 -#define __NR_HPUX_recv_old 102 -#define __NR_HPUX_socketaddr_old 103 -#define __NR_HPUX_bind_old 104 -#define __NR_HPUX_setsockopt_old 105 -#define __NR_HPUX_listen_old 106 -#define __NR_HPUX_vtimes_old 107 -#define __NR_HPUX_sigvector 108 -#define __NR_HPUX_sigblock 109 -#define __NR_HPUX_siggetmask 110 -#define __NR_HPUX_sigpause 111 -#define __NR_HPUX_sigstack 112 -#define __NR_HPUX_recvmsg_old 113 -#define __NR_HPUX_sendmsg_old 114 -#define __NR_HPUX_vtrace_old 115 -#define __NR_HPUX_gettimeofday 116 -#define __NR_HPUX_getrusage 117 -#define __NR_HPUX_getsockopt_old 118 -#define __NR_HPUX_resuba_old 119 -#define __NR_HPUX_readv 120 -#define __NR_HPUX_writev 121 -#define __NR_HPUX_settimeofday 122 -#define __NR_HPUX_fchown 123 -#define __NR_HPUX_fchmod 124 -#define __NR_HPUX_recvfrom_old 125 -#define __NR_HPUX_setresuid 126 -#define __NR_HPUX_setresgid 127 -#define __NR_HPUX_rename 128 -#define __NR_HPUX_truncate 129 -#define __NR_HPUX_ftruncate 130 -#define __NR_HPUX_flock_old 131 -#define __NR_HPUX_sysconf 132 -#define __NR_HPUX_sendto_old 133 -#define __NR_HPUX_shutdown_old 134 -#define __NR_HPUX_socketpair_old 135 -#define __NR_HPUX_mkdir 136 -#define __NR_HPUX_rmdir 137 -#define __NR_HPUX_utimes_old 138 -#define __NR_HPUX_sigcleanup_old 139 -#define __NR_HPUX_setcore 140 -#define __NR_HPUX_getpeername_old 141 -#define __NR_HPUX_gethostid 142 -#define __NR_HPUX_sethostid 143 -#define __NR_HPUX_getrlimit 144 -#define __NR_HPUX_setrlimit 145 -#define __NR_HPUX_killpg_old 146 -#define __NR_HPUX_cachectl 147 -#define __NR_HPUX_quotactl 148 -#define __NR_HPUX_get_sysinfo 149 -#define __NR_HPUX_getsockname_old 150 -#define __NR_HPUX_privgrp 151 -#define __NR_HPUX_rtprio 152 -#define __NR_HPUX_plock 153 -#define __NR_HPUX_reserved3 154 -#define __NR_HPUX_lockf 155 -#define __NR_HPUX_semget 156 -#define __NR_HPUX_osemctl 157 -#define __NR_HPUX_semop 158 -#define __NR_HPUX_msgget 159 -#define __NR_HPUX_omsgctl 160 -#define __NR_HPUX_msgsnd 161 -#define __NR_HPUX_msgrecv 162 -#define __NR_HPUX_shmget 163 -#define __NR_HPUX_oshmctl 164 -#define __NR_HPUX_shmat 165 -#define __NR_HPUX_shmdt 166 -#define __NR_HPUX_m68020_advise 167 -/* [168,189] are for Discless/DUX */ -#define __NR_HPUX_csp 168 -#define __NR_HPUX_cluster 169 -#define __NR_HPUX_mkrnod 170 -#define __NR_HPUX_test 171 -#define __NR_HPUX_unsp_open 172 -#define __NR_HPUX_reserved4 173 -#define __NR_HPUX_getcontext_old 174 -#define __NR_HPUX_osetcontext 175 -#define __NR_HPUX_bigio 176 -#define __NR_HPUX_pipenode 177 -#define __NR_HPUX_lsync 178 -#define __NR_HPUX_getmachineid 179 -#define __NR_HPUX_cnodeid 180 -#define __NR_HPUX_cnodes 181 -#define __NR_HPUX_swapclients 182 -#define __NR_HPUX_rmt_process 183 -#define __NR_HPUX_dskless_stats 184 -#define __NR_HPUX_sigprocmask 185 -#define __NR_HPUX_sigpending 186 -#define __NR_HPUX_sigsuspend 187 -#define __NR_HPUX_sigaction 188 -#define __NR_HPUX_reserved5 189 -#define __NR_HPUX_nfssvc 190 -#define __NR_HPUX_getfh 191 -#define __NR_HPUX_getdomainname 192 -#define __NR_HPUX_setdomainname 193 -#define __NR_HPUX_async_daemon 194 -#define __NR_HPUX_getdirentries 195 -#define __NR_HPUX_statfs 196 -#define __NR_HPUX_fstatfs 197 -#define __NR_HPUX_vfsmount 198 -#define __NR_HPUX_reserved6 199 -#define __NR_HPUX_waitpid 200 -/* 201 - 223 missing */ -#define __NR_HPUX_sigsetreturn 224 -#define __NR_HPUX_sigsetstatemask 225 -/* 226 missing */ -#define __NR_HPUX_cs 227 -#define __NR_HPUX_cds 228 -#define __NR_HPUX_set_no_trunc 229 -#define __NR_HPUX_pathconf 230 -#define __NR_HPUX_fpathconf 231 -/* 232, 233 missing */ -#define __NR_HPUX_nfs_fcntl 234 -#define __NR_HPUX_ogetacl 235 -#define __NR_HPUX_ofgetacl 236 -#define __NR_HPUX_osetacl 237 -#define __NR_HPUX_ofsetacl 238 -#define __NR_HPUX_pstat 239 -#define __NR_HPUX_getaudid 240 -#define __NR_HPUX_setaudid 241 -#define __NR_HPUX_getaudproc 242 -#define __NR_HPUX_setaudproc 243 -#define __NR_HPUX_getevent 244 -#define __NR_HPUX_setevent 245 -#define __NR_HPUX_audwrite 246 -#define __NR_HPUX_audswitch 247 -#define __NR_HPUX_audctl 248 -#define __NR_HPUX_ogetaccess 249 -#define __NR_HPUX_fsctl 250 -/* 251 - 258 missing */ -#define __NR_HPUX_swapfs 259 -#define __NR_HPUX_fss 260 -/* 261 - 266 missing */ -#define __NR_HPUX_tsync 267 -#define __NR_HPUX_getnumfds 268 -#define __NR_HPUX_poll 269 -#define __NR_HPUX_getmsg 270 -#define __NR_HPUX_putmsg 271 -#define __NR_HPUX_fchdir 272 -#define __NR_HPUX_getmount_cnt 273 -#define __NR_HPUX_getmount_entry 274 -#define __NR_HPUX_accept 275 -#define __NR_HPUX_bind 276 -#define __NR_HPUX_connect 277 -#define __NR_HPUX_getpeername 278 -#define __NR_HPUX_getsockname 279 -#define __NR_HPUX_getsockopt 280 -#define __NR_HPUX_listen 281 -#define __NR_HPUX_recv 282 -#define __NR_HPUX_recvfrom 283 -#define __NR_HPUX_recvmsg 284 -#define __NR_HPUX_send 285 -#define __NR_HPUX_sendmsg 286 -#define __NR_HPUX_sendto 287 -#define __NR_HPUX_setsockopt 288 -#define __NR_HPUX_shutdown 289 -#define __NR_HPUX_socket 290 -#define __NR_HPUX_socketpair 291 -#define __NR_HPUX_proc_open 292 -#define __NR_HPUX_proc_close 293 -#define __NR_HPUX_proc_send 294 -#define __NR_HPUX_proc_recv 295 -#define __NR_HPUX_proc_sendrecv 296 -#define __NR_HPUX_proc_syscall 297 -/* 298 - 311 missing */ -#define __NR_HPUX_semctl 312 -#define __NR_HPUX_msgctl 313 -#define __NR_HPUX_shmctl 314 -#define __NR_HPUX_mpctl 315 -#define __NR_HPUX_exportfs 316 -#define __NR_HPUX_getpmsg 317 -#define __NR_HPUX_putpmsg 318 -/* 319 missing */ -#define __NR_HPUX_msync 320 -#define __NR_HPUX_msleep 321 -#define __NR_HPUX_mwakeup 322 -#define __NR_HPUX_msem_init 323 -#define __NR_HPUX_msem_remove 324 -#define __NR_HPUX_adjtime 325 -#define __NR_HPUX_kload 326 -#define __NR_HPUX_fattach 327 -#define __NR_HPUX_fdetach 328 -#define __NR_HPUX_serialize 329 -#define __NR_HPUX_statvfs 330 -#define __NR_HPUX_fstatvfs 331 -#define __NR_HPUX_lchown 332 -#define __NR_HPUX_getsid 333 -#define __NR_HPUX_sysfs 334 -/* 335, 336 missing */ -#define __NR_HPUX_sched_setparam 337 -#define __NR_HPUX_sched_getparam 338 -#define __NR_HPUX_sched_setscheduler 339 -#define __NR_HPUX_sched_getscheduler 340 -#define __NR_HPUX_sched_yield 341 -#define __NR_HPUX_sched_get_priority_max 342 -#define __NR_HPUX_sched_get_priority_min 343 -#define __NR_HPUX_sched_rr_get_interval 344 -#define __NR_HPUX_clock_settime 345 -#define __NR_HPUX_clock_gettime 346 -#define __NR_HPUX_clock_getres 347 -#define __NR_HPUX_timer_create 348 -#define __NR_HPUX_timer_delete 349 -#define __NR_HPUX_timer_settime 350 -#define __NR_HPUX_timer_gettime 351 -#define __NR_HPUX_timer_getoverrun 352 -#define __NR_HPUX_nanosleep 353 -#define __NR_HPUX_toolbox 354 -/* 355 missing */ -#define __NR_HPUX_getdents 356 -#define __NR_HPUX_getcontext 357 -#define __NR_HPUX_sysinfo 358 -#define __NR_HPUX_fcntl64 359 -#define __NR_HPUX_ftruncate64 360 -#define __NR_HPUX_fstat64 361 -#define __NR_HPUX_getdirentries64 362 -#define __NR_HPUX_getrlimit64 363 -#define __NR_HPUX_lockf64 364 -#define __NR_HPUX_lseek64 365 -#define __NR_HPUX_lstat64 366 -#define __NR_HPUX_mmap64 367 -#define __NR_HPUX_setrlimit64 368 -#define __NR_HPUX_stat64 369 -#define __NR_HPUX_truncate64 370 -#define __NR_HPUX_ulimit64 371 -#define __NR_HPUX_pread 372 -#define __NR_HPUX_preadv 373 -#define __NR_HPUX_pwrite 374 -#define __NR_HPUX_pwritev 375 -#define __NR_HPUX_pread64 376 -#define __NR_HPUX_preadv64 377 -#define __NR_HPUX_pwrite64 378 -#define __NR_HPUX_pwritev64 379 -#define __NR_HPUX_setcontext 380 -#define __NR_HPUX_sigaltstack 381 -#define __NR_HPUX_waitid 382 -#define __NR_HPUX_setpgrp 383 -#define __NR_HPUX_recvmsg2 384 -#define __NR_HPUX_sendmsg2 385 -#define __NR_HPUX_socket2 386 -#define __NR_HPUX_socketpair2 387 -#define __NR_HPUX_setregid 388 -#define __NR_HPUX_lwp_create 389 -#define __NR_HPUX_lwp_terminate 390 -#define __NR_HPUX_lwp_wait 391 -#define __NR_HPUX_lwp_suspend 392 -#define __NR_HPUX_lwp_resume 393 -/* 394 missing */ -#define __NR_HPUX_lwp_abort_syscall 395 -#define __NR_HPUX_lwp_info 396 -#define __NR_HPUX_lwp_kill 397 -#define __NR_HPUX_ksleep 398 -#define __NR_HPUX_kwakeup 399 -/* 400 missing */ -#define __NR_HPUX_pstat_getlwp 401 -#define __NR_HPUX_lwp_exit 402 -#define __NR_HPUX_lwp_continue 403 -#define __NR_HPUX_getacl 404 -#define __NR_HPUX_fgetacl 405 -#define __NR_HPUX_setacl 406 -#define __NR_HPUX_fsetacl 407 -#define __NR_HPUX_getaccess 408 -#define __NR_HPUX_lwp_mutex_init 409 -#define __NR_HPUX_lwp_mutex_lock_sys 410 -#define __NR_HPUX_lwp_mutex_unlock 411 -#define __NR_HPUX_lwp_cond_init 412 -#define __NR_HPUX_lwp_cond_signal 413 -#define __NR_HPUX_lwp_cond_broadcast 414 -#define __NR_HPUX_lwp_cond_wait_sys 415 -#define __NR_HPUX_lwp_getscheduler 416 -#define __NR_HPUX_lwp_setscheduler 417 -#define __NR_HPUX_lwp_getstate 418 -#define __NR_HPUX_lwp_setstate 419 -#define __NR_HPUX_lwp_detach 420 -#define __NR_HPUX_mlock 421 -#define __NR_HPUX_munlock 422 -#define __NR_HPUX_mlockall 423 -#define __NR_HPUX_munlockall 424 -#define __NR_HPUX_shm_open 425 -#define __NR_HPUX_shm_unlink 426 -#define __NR_HPUX_sigqueue 427 -#define __NR_HPUX_sigwaitinfo 428 -#define __NR_HPUX_sigtimedwait 429 -#define __NR_HPUX_sigwait 430 -#define __NR_HPUX_aio_read 431 -#define __NR_HPUX_aio_write 432 -#define __NR_HPUX_lio_listio 433 -#define __NR_HPUX_aio_error 434 -#define __NR_HPUX_aio_return 435 -#define __NR_HPUX_aio_cancel 436 -#define __NR_HPUX_aio_suspend 437 -#define __NR_HPUX_aio_fsync 438 -#define __NR_HPUX_mq_open 439 -#define __NR_HPUX_mq_close 440 -#define __NR_HPUX_mq_unlink 441 -#define __NR_HPUX_mq_send 442 -#define __NR_HPUX_mq_receive 443 -#define __NR_HPUX_mq_notify 444 -#define __NR_HPUX_mq_setattr 445 -#define __NR_HPUX_mq_getattr 446 -#define __NR_HPUX_ksem_open 447 -#define __NR_HPUX_ksem_unlink 448 -#define __NR_HPUX_ksem_close 449 -#define __NR_HPUX_ksem_post 450 -#define __NR_HPUX_ksem_wait 451 -#define __NR_HPUX_ksem_read 452 -#define __NR_HPUX_ksem_trywait 453 -#define __NR_HPUX_lwp_rwlock_init 454 -#define __NR_HPUX_lwp_rwlock_destroy 455 -#define __NR_HPUX_lwp_rwlock_rdlock_sys 456 -#define __NR_HPUX_lwp_rwlock_wrlock_sys 457 -#define __NR_HPUX_lwp_rwlock_tryrdlock 458 -#define __NR_HPUX_lwp_rwlock_trywrlock 459 -#define __NR_HPUX_lwp_rwlock_unlock 460 -#define __NR_HPUX_ttrace 461 -#define __NR_HPUX_ttrace_wait 462 -#define __NR_HPUX_lf_wire_mem 463 -#define __NR_HPUX_lf_unwire_mem 464 -#define __NR_HPUX_lf_send_pin_map 465 -#define __NR_HPUX_lf_free_buf 466 -#define __NR_HPUX_lf_wait_nq 467 -#define __NR_HPUX_lf_wakeup_conn_q 468 -#define __NR_HPUX_lf_unused 469 -#define __NR_HPUX_lwp_sema_init 470 -#define __NR_HPUX_lwp_sema_post 471 -#define __NR_HPUX_lwp_sema_wait 472 -#define __NR_HPUX_lwp_sema_trywait 473 -#define __NR_HPUX_lwp_sema_destroy 474 -#define __NR_HPUX_statvfs64 475 -#define __NR_HPUX_fstatvfs64 476 -#define __NR_HPUX_msh_register 477 -#define __NR_HPUX_ptrace64 478 -#define __NR_HPUX_sendfile 479 -#define __NR_HPUX_sendpath 480 -#define __NR_HPUX_sendfile64 481 -#define __NR_HPUX_sendpath64 482 -#define __NR_HPUX_modload 483 -#define __NR_HPUX_moduload 484 -#define __NR_HPUX_modpath 485 -#define __NR_HPUX_getksym 486 -#define __NR_HPUX_modadm 487 -#define __NR_HPUX_modstat 488 -#define __NR_HPUX_lwp_detached_exit 489 -#define __NR_HPUX_crashconf 490 -#define __NR_HPUX_siginhibit 491 -#define __NR_HPUX_sigenable 492 -#define __NR_HPUX_spuctl 493 -#define __NR_HPUX_zerokernelsum 494 -#define __NR_HPUX_nfs_kstat 495 -#define __NR_HPUX_aio_read64 496 -#define __NR_HPUX_aio_write64 497 -#define __NR_HPUX_aio_error64 498 -#define __NR_HPUX_aio_return64 499 -#define __NR_HPUX_aio_cancel64 500 -#define __NR_HPUX_aio_suspend64 501 -#define __NR_HPUX_aio_fsync64 502 -#define __NR_HPUX_lio_listio64 503 -#define __NR_HPUX_recv2 504 -#define __NR_HPUX_recvfrom2 505 -#define __NR_HPUX_send2 506 -#define __NR_HPUX_sendto2 507 -#define __NR_HPUX_acl 508 -#define __NR_HPUX___cnx_p2p_ctl 509 -#define __NR_HPUX___cnx_gsched_ctl 510 -#define __NR_HPUX___cnx_pmon_ctl 511 - -#define __NR_HPUX_syscalls 512 - -/* - * Linux system call numbers. - * - * Cary Coutant says that we should just use another syscall gateway - * page to avoid clashing with the HPUX space, and I think he's right: - * it will would keep a branch out of our syscall entry path, at the - * very least. If we decide to change it later, we can ``just'' tweak - * the LINUX_GATEWAY_ADDR define at the bottom and make __NR_Linux be - * 1024 or something. Oh, and recompile libc. =) - * - * 64-bit HPUX binaries get the syscall gateway address passed in a register - * from the kernel at startup, which seems a sane strategy. - */ - -#define __NR_Linux 0 -#define __NR_restart_syscall (__NR_Linux + 0) -#define __NR_exit (__NR_Linux + 1) -#define __NR_fork (__NR_Linux + 2) -#define __NR_read (__NR_Linux + 3) -#define __NR_write (__NR_Linux + 4) -#define __NR_open (__NR_Linux + 5) -#define __NR_close (__NR_Linux + 6) -#define __NR_waitpid (__NR_Linux + 7) -#define __NR_creat (__NR_Linux + 8) -#define __NR_link (__NR_Linux + 9) -#define __NR_unlink (__NR_Linux + 10) -#define __NR_execve (__NR_Linux + 11) -#define __NR_chdir (__NR_Linux + 12) -#define __NR_time (__NR_Linux + 13) -#define __NR_mknod (__NR_Linux + 14) -#define __NR_chmod (__NR_Linux + 15) -#define __NR_lchown (__NR_Linux + 16) -#define __NR_socket (__NR_Linux + 17) -#define __NR_stat (__NR_Linux + 18) -#define __NR_lseek (__NR_Linux + 19) -#define __NR_getpid (__NR_Linux + 20) -#define __NR_mount (__NR_Linux + 21) -#define __NR_bind (__NR_Linux + 22) -#define __NR_setuid (__NR_Linux + 23) -#define __NR_getuid (__NR_Linux + 24) -#define __NR_stime (__NR_Linux + 25) -#define __NR_ptrace (__NR_Linux + 26) -#define __NR_alarm (__NR_Linux + 27) -#define __NR_fstat (__NR_Linux + 28) -#define __NR_pause (__NR_Linux + 29) -#define __NR_utime (__NR_Linux + 30) -#define __NR_connect (__NR_Linux + 31) -#define __NR_listen (__NR_Linux + 32) -#define __NR_access (__NR_Linux + 33) -#define __NR_nice (__NR_Linux + 34) -#define __NR_accept (__NR_Linux + 35) -#define __NR_sync (__NR_Linux + 36) -#define __NR_kill (__NR_Linux + 37) -#define __NR_rename (__NR_Linux + 38) -#define __NR_mkdir (__NR_Linux + 39) -#define __NR_rmdir (__NR_Linux + 40) -#define __NR_dup (__NR_Linux + 41) -#define __NR_pipe (__NR_Linux + 42) -#define __NR_times (__NR_Linux + 43) -#define __NR_getsockname (__NR_Linux + 44) -#define __NR_brk (__NR_Linux + 45) -#define __NR_setgid (__NR_Linux + 46) -#define __NR_getgid (__NR_Linux + 47) -#define __NR_signal (__NR_Linux + 48) -#define __NR_geteuid (__NR_Linux + 49) -#define __NR_getegid (__NR_Linux + 50) -#define __NR_acct (__NR_Linux + 51) -#define __NR_umount2 (__NR_Linux + 52) -#define __NR_getpeername (__NR_Linux + 53) -#define __NR_ioctl (__NR_Linux + 54) -#define __NR_fcntl (__NR_Linux + 55) -#define __NR_socketpair (__NR_Linux + 56) -#define __NR_setpgid (__NR_Linux + 57) -#define __NR_send (__NR_Linux + 58) -#define __NR_uname (__NR_Linux + 59) -#define __NR_umask (__NR_Linux + 60) -#define __NR_chroot (__NR_Linux + 61) -#define __NR_ustat (__NR_Linux + 62) -#define __NR_dup2 (__NR_Linux + 63) -#define __NR_getppid (__NR_Linux + 64) -#define __NR_getpgrp (__NR_Linux + 65) -#define __NR_setsid (__NR_Linux + 66) -#define __NR_pivot_root (__NR_Linux + 67) -#define __NR_sgetmask (__NR_Linux + 68) -#define __NR_ssetmask (__NR_Linux + 69) -#define __NR_setreuid (__NR_Linux + 70) -#define __NR_setregid (__NR_Linux + 71) -#define __NR_mincore (__NR_Linux + 72) -#define __NR_sigpending (__NR_Linux + 73) -#define __NR_sethostname (__NR_Linux + 74) -#define __NR_setrlimit (__NR_Linux + 75) -#define __NR_getrlimit (__NR_Linux + 76) -#define __NR_getrusage (__NR_Linux + 77) -#define __NR_gettimeofday (__NR_Linux + 78) -#define __NR_settimeofday (__NR_Linux + 79) -#define __NR_getgroups (__NR_Linux + 80) -#define __NR_setgroups (__NR_Linux + 81) -#define __NR_sendto (__NR_Linux + 82) -#define __NR_symlink (__NR_Linux + 83) -#define __NR_lstat (__NR_Linux + 84) -#define __NR_readlink (__NR_Linux + 85) -#define __NR_uselib (__NR_Linux + 86) -#define __NR_swapon (__NR_Linux + 87) -#define __NR_reboot (__NR_Linux + 88) -#define __NR_mmap2 (__NR_Linux + 89) -#define __NR_mmap (__NR_Linux + 90) -#define __NR_munmap (__NR_Linux + 91) -#define __NR_truncate (__NR_Linux + 92) -#define __NR_ftruncate (__NR_Linux + 93) -#define __NR_fchmod (__NR_Linux + 94) -#define __NR_fchown (__NR_Linux + 95) -#define __NR_getpriority (__NR_Linux + 96) -#define __NR_setpriority (__NR_Linux + 97) -#define __NR_recv (__NR_Linux + 98) -#define __NR_statfs (__NR_Linux + 99) -#define __NR_fstatfs (__NR_Linux + 100) -#define __NR_stat64 (__NR_Linux + 101) -/* #define __NR_socketcall (__NR_Linux + 102) */ -#define __NR_syslog (__NR_Linux + 103) -#define __NR_setitimer (__NR_Linux + 104) -#define __NR_getitimer (__NR_Linux + 105) -#define __NR_capget (__NR_Linux + 106) -#define __NR_capset (__NR_Linux + 107) -#define __NR_pread64 (__NR_Linux + 108) -#define __NR_pwrite64 (__NR_Linux + 109) -#define __NR_getcwd (__NR_Linux + 110) -#define __NR_vhangup (__NR_Linux + 111) -#define __NR_fstat64 (__NR_Linux + 112) -#define __NR_vfork (__NR_Linux + 113) -#define __NR_wait4 (__NR_Linux + 114) -#define __NR_swapoff (__NR_Linux + 115) -#define __NR_sysinfo (__NR_Linux + 116) -#define __NR_shutdown (__NR_Linux + 117) -#define __NR_fsync (__NR_Linux + 118) -#define __NR_madvise (__NR_Linux + 119) -#define __NR_clone (__NR_Linux + 120) -#define __NR_setdomainname (__NR_Linux + 121) -#define __NR_sendfile (__NR_Linux + 122) -#define __NR_recvfrom (__NR_Linux + 123) -#define __NR_adjtimex (__NR_Linux + 124) -#define __NR_mprotect (__NR_Linux + 125) -#define __NR_sigprocmask (__NR_Linux + 126) -#define __NR_create_module (__NR_Linux + 127) -#define __NR_init_module (__NR_Linux + 128) -#define __NR_delete_module (__NR_Linux + 129) -#define __NR_get_kernel_syms (__NR_Linux + 130) -#define __NR_quotactl (__NR_Linux + 131) -#define __NR_getpgid (__NR_Linux + 132) -#define __NR_fchdir (__NR_Linux + 133) -#define __NR_bdflush (__NR_Linux + 134) -#define __NR_sysfs (__NR_Linux + 135) -#define __NR_personality (__NR_Linux + 136) -#define __NR_afs_syscall (__NR_Linux + 137) /* Syscall for Andrew File System */ -#define __NR_setfsuid (__NR_Linux + 138) -#define __NR_setfsgid (__NR_Linux + 139) -#define __NR__llseek (__NR_Linux + 140) -#define __NR_getdents (__NR_Linux + 141) -#define __NR__newselect (__NR_Linux + 142) -#define __NR_flock (__NR_Linux + 143) -#define __NR_msync (__NR_Linux + 144) -#define __NR_readv (__NR_Linux + 145) -#define __NR_writev (__NR_Linux + 146) -#define __NR_getsid (__NR_Linux + 147) -#define __NR_fdatasync (__NR_Linux + 148) -#define __NR__sysctl (__NR_Linux + 149) -#define __NR_mlock (__NR_Linux + 150) -#define __NR_munlock (__NR_Linux + 151) -#define __NR_mlockall (__NR_Linux + 152) -#define __NR_munlockall (__NR_Linux + 153) -#define __NR_sched_setparam (__NR_Linux + 154) -#define __NR_sched_getparam (__NR_Linux + 155) -#define __NR_sched_setscheduler (__NR_Linux + 156) -#define __NR_sched_getscheduler (__NR_Linux + 157) -#define __NR_sched_yield (__NR_Linux + 158) -#define __NR_sched_get_priority_max (__NR_Linux + 159) -#define __NR_sched_get_priority_min (__NR_Linux + 160) -#define __NR_sched_rr_get_interval (__NR_Linux + 161) -#define __NR_nanosleep (__NR_Linux + 162) -#define __NR_mremap (__NR_Linux + 163) -#define __NR_setresuid (__NR_Linux + 164) -#define __NR_getresuid (__NR_Linux + 165) -#define __NR_sigaltstack (__NR_Linux + 166) -#define __NR_query_module (__NR_Linux + 167) -#define __NR_poll (__NR_Linux + 168) -#define __NR_nfsservctl (__NR_Linux + 169) -#define __NR_setresgid (__NR_Linux + 170) -#define __NR_getresgid (__NR_Linux + 171) -#define __NR_prctl (__NR_Linux + 172) -#define __NR_rt_sigreturn (__NR_Linux + 173) -#define __NR_rt_sigaction (__NR_Linux + 174) -#define __NR_rt_sigprocmask (__NR_Linux + 175) -#define __NR_rt_sigpending (__NR_Linux + 176) -#define __NR_rt_sigtimedwait (__NR_Linux + 177) -#define __NR_rt_sigqueueinfo (__NR_Linux + 178) -#define __NR_rt_sigsuspend (__NR_Linux + 179) -#define __NR_chown (__NR_Linux + 180) -#define __NR_setsockopt (__NR_Linux + 181) -#define __NR_getsockopt (__NR_Linux + 182) -#define __NR_sendmsg (__NR_Linux + 183) -#define __NR_recvmsg (__NR_Linux + 184) -#define __NR_semop (__NR_Linux + 185) -#define __NR_semget (__NR_Linux + 186) -#define __NR_semctl (__NR_Linux + 187) -#define __NR_msgsnd (__NR_Linux + 188) -#define __NR_msgrcv (__NR_Linux + 189) -#define __NR_msgget (__NR_Linux + 190) -#define __NR_msgctl (__NR_Linux + 191) -#define __NR_shmat (__NR_Linux + 192) -#define __NR_shmdt (__NR_Linux + 193) -#define __NR_shmget (__NR_Linux + 194) -#define __NR_shmctl (__NR_Linux + 195) - -#define __NR_getpmsg (__NR_Linux + 196) /* Somebody *wants* streams? */ -#define __NR_putpmsg (__NR_Linux + 197) - -#define __NR_lstat64 (__NR_Linux + 198) -#define __NR_truncate64 (__NR_Linux + 199) -#define __NR_ftruncate64 (__NR_Linux + 200) -#define __NR_getdents64 (__NR_Linux + 201) -#define __NR_fcntl64 (__NR_Linux + 202) -#define __NR_attrctl (__NR_Linux + 203) -#define __NR_acl_get (__NR_Linux + 204) -#define __NR_acl_set (__NR_Linux + 205) -#define __NR_gettid (__NR_Linux + 206) -#define __NR_readahead (__NR_Linux + 207) -#define __NR_tkill (__NR_Linux + 208) -#define __NR_sendfile64 (__NR_Linux + 209) -#define __NR_futex (__NR_Linux + 210) -#define __NR_sched_setaffinity (__NR_Linux + 211) -#define __NR_sched_getaffinity (__NR_Linux + 212) -#define __NR_set_thread_area (__NR_Linux + 213) -#define __NR_get_thread_area (__NR_Linux + 214) -#define __NR_io_setup (__NR_Linux + 215) -#define __NR_io_destroy (__NR_Linux + 216) -#define __NR_io_getevents (__NR_Linux + 217) -#define __NR_io_submit (__NR_Linux + 218) -#define __NR_io_cancel (__NR_Linux + 219) -#define __NR_alloc_hugepages (__NR_Linux + 220) -#define __NR_free_hugepages (__NR_Linux + 221) -#define __NR_exit_group (__NR_Linux + 222) -#define __NR_lookup_dcookie (__NR_Linux + 223) -#define __NR_epoll_create (__NR_Linux + 224) -#define __NR_epoll_ctl (__NR_Linux + 225) -#define __NR_epoll_wait (__NR_Linux + 226) -#define __NR_remap_file_pages (__NR_Linux + 227) -#define __NR_semtimedop (__NR_Linux + 228) -#define __NR_mq_open (__NR_Linux + 229) -#define __NR_mq_unlink (__NR_Linux + 230) -#define __NR_mq_timedsend (__NR_Linux + 231) -#define __NR_mq_timedreceive (__NR_Linux + 232) -#define __NR_mq_notify (__NR_Linux + 233) -#define __NR_mq_getsetattr (__NR_Linux + 234) -#define __NR_waitid (__NR_Linux + 235) -#define __NR_fadvise64_64 (__NR_Linux + 236) -#define __NR_set_tid_address (__NR_Linux + 237) -#define __NR_setxattr (__NR_Linux + 238) -#define __NR_lsetxattr (__NR_Linux + 239) -#define __NR_fsetxattr (__NR_Linux + 240) -#define __NR_getxattr (__NR_Linux + 241) -#define __NR_lgetxattr (__NR_Linux + 242) -#define __NR_fgetxattr (__NR_Linux + 243) -#define __NR_listxattr (__NR_Linux + 244) -#define __NR_llistxattr (__NR_Linux + 245) -#define __NR_flistxattr (__NR_Linux + 246) -#define __NR_removexattr (__NR_Linux + 247) -#define __NR_lremovexattr (__NR_Linux + 248) -#define __NR_fremovexattr (__NR_Linux + 249) -#define __NR_timer_create (__NR_Linux + 250) -#define __NR_timer_settime (__NR_Linux + 251) -#define __NR_timer_gettime (__NR_Linux + 252) -#define __NR_timer_getoverrun (__NR_Linux + 253) -#define __NR_timer_delete (__NR_Linux + 254) -#define __NR_clock_settime (__NR_Linux + 255) -#define __NR_clock_gettime (__NR_Linux + 256) -#define __NR_clock_getres (__NR_Linux + 257) -#define __NR_clock_nanosleep (__NR_Linux + 258) -#define __NR_tgkill (__NR_Linux + 259) -#define __NR_mbind (__NR_Linux + 260) -#define __NR_get_mempolicy (__NR_Linux + 261) -#define __NR_set_mempolicy (__NR_Linux + 262) -#define __NR_vserver (__NR_Linux + 263) -#define __NR_add_key (__NR_Linux + 264) -#define __NR_request_key (__NR_Linux + 265) -#define __NR_keyctl (__NR_Linux + 266) -#define __NR_ioprio_set (__NR_Linux + 267) -#define __NR_ioprio_get (__NR_Linux + 268) -#define __NR_inotify_init (__NR_Linux + 269) -#define __NR_inotify_add_watch (__NR_Linux + 270) -#define __NR_inotify_rm_watch (__NR_Linux + 271) -#define __NR_migrate_pages (__NR_Linux + 272) -#define __NR_pselect6 (__NR_Linux + 273) -#define __NR_ppoll (__NR_Linux + 274) -#define __NR_openat (__NR_Linux + 275) -#define __NR_mkdirat (__NR_Linux + 276) -#define __NR_mknodat (__NR_Linux + 277) -#define __NR_fchownat (__NR_Linux + 278) -#define __NR_futimesat (__NR_Linux + 279) -#define __NR_fstatat64 (__NR_Linux + 280) -#define __NR_unlinkat (__NR_Linux + 281) -#define __NR_renameat (__NR_Linux + 282) -#define __NR_linkat (__NR_Linux + 283) -#define __NR_symlinkat (__NR_Linux + 284) -#define __NR_readlinkat (__NR_Linux + 285) -#define __NR_fchmodat (__NR_Linux + 286) -#define __NR_faccessat (__NR_Linux + 287) -#define __NR_unshare (__NR_Linux + 288) -#define __NR_set_robust_list (__NR_Linux + 289) -#define __NR_get_robust_list (__NR_Linux + 290) -#define __NR_splice (__NR_Linux + 291) -#define __NR_sync_file_range (__NR_Linux + 292) -#define __NR_tee (__NR_Linux + 293) -#define __NR_vmsplice (__NR_Linux + 294) -#define __NR_move_pages (__NR_Linux + 295) -#define __NR_getcpu (__NR_Linux + 296) -#define __NR_epoll_pwait (__NR_Linux + 297) -#define __NR_statfs64 (__NR_Linux + 298) -#define __NR_fstatfs64 (__NR_Linux + 299) -#define __NR_kexec_load (__NR_Linux + 300) -#define __NR_utimensat (__NR_Linux + 301) -#define __NR_signalfd (__NR_Linux + 302) -#define __NR_timerfd (__NR_Linux + 303) -#define __NR_eventfd (__NR_Linux + 304) -#define __NR_fallocate (__NR_Linux + 305) -#define __NR_timerfd_create (__NR_Linux + 306) -#define __NR_timerfd_settime (__NR_Linux + 307) -#define __NR_timerfd_gettime (__NR_Linux + 308) -#define __NR_signalfd4 (__NR_Linux + 309) -#define __NR_eventfd2 (__NR_Linux + 310) -#define __NR_epoll_create1 (__NR_Linux + 311) -#define __NR_dup3 (__NR_Linux + 312) -#define __NR_pipe2 (__NR_Linux + 313) -#define __NR_inotify_init1 (__NR_Linux + 314) -#define __NR_preadv (__NR_Linux + 315) -#define __NR_pwritev (__NR_Linux + 316) -#define __NR_rt_tgsigqueueinfo (__NR_Linux + 317) -#define __NR_perf_event_open (__NR_Linux + 318) -#define __NR_recvmmsg (__NR_Linux + 319) -#define __NR_accept4 (__NR_Linux + 320) -#define __NR_prlimit64 (__NR_Linux + 321) -#define __NR_fanotify_init (__NR_Linux + 322) -#define __NR_fanotify_mark (__NR_Linux + 323) -#define __NR_clock_adjtime (__NR_Linux + 324) -#define __NR_name_to_handle_at (__NR_Linux + 325) -#define __NR_open_by_handle_at (__NR_Linux + 326) -#define __NR_syncfs (__NR_Linux + 327) -#define __NR_setns (__NR_Linux + 328) -#define __NR_sendmmsg (__NR_Linux + 329) - -#define __NR_Linux_syscalls (__NR_sendmmsg + 1) - - -#define __IGNORE_select /* newselect */ -#define __IGNORE_fadvise64 /* fadvise64_64 */ -#define __IGNORE_utimes /* utime */ - - -#define HPUX_GATEWAY_ADDR 0xC0000004 -#define LINUX_GATEWAY_ADDR 0x100 +#include -#ifdef __KERNEL__ #ifndef __ASSEMBLY__ #define SYS_ify(syscall_name) __NR_##syscall_name @@ -1008,5 +176,4 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) \ */ #define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") -#endif /* __KERNEL__ */ #endif /* _ASM_PARISC_UNISTD_H_ */ diff --git a/arch/parisc/include/uapi/asm/Kbuild b/arch/parisc/include/uapi/asm/Kbuild index baebb3da1d4..a580642555b 100644 --- a/arch/parisc/include/uapi/asm/Kbuild +++ b/arch/parisc/include/uapi/asm/Kbuild @@ -1,3 +1,31 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +header-y += bitsperlong.h +header-y += byteorder.h +header-y += errno.h +header-y += fcntl.h +header-y += ioctl.h +header-y += ioctls.h +header-y += ipcbuf.h +header-y += mman.h +header-y += msgbuf.h +header-y += pdc.h +header-y += posix_types.h +header-y += ptrace.h +header-y += resource.h +header-y += sembuf.h +header-y += setup.h +header-y += shmbuf.h +header-y += sigcontext.h +header-y += siginfo.h +header-y += signal.h +header-y += socket.h +header-y += sockios.h +header-y += stat.h +header-y += statfs.h +header-y += swab.h +header-y += termbits.h +header-y += termios.h +header-y += types.h +header-y += unistd.h diff --git a/arch/parisc/include/uapi/asm/bitsperlong.h b/arch/parisc/include/uapi/asm/bitsperlong.h new file mode 100644 index 00000000000..75196b415d3 --- /dev/null +++ b/arch/parisc/include/uapi/asm/bitsperlong.h @@ -0,0 +1,20 @@ +#ifndef __ASM_PARISC_BITSPERLONG_H +#define __ASM_PARISC_BITSPERLONG_H + +/* + * using CONFIG_* outside of __KERNEL__ is wrong, + * __LP64__ was also removed from headers, so what + * is the right approach on parisc? + * -arnd + */ +#if (defined(__KERNEL__) && defined(CONFIG_64BIT)) || defined (__LP64__) +#define __BITS_PER_LONG 64 +#define SHIFT_PER_LONG 6 +#else +#define __BITS_PER_LONG 32 +#define SHIFT_PER_LONG 5 +#endif + +#include + +#endif /* __ASM_PARISC_BITSPERLONG_H */ diff --git a/arch/parisc/include/uapi/asm/byteorder.h b/arch/parisc/include/uapi/asm/byteorder.h new file mode 100644 index 00000000000..58af2c5f5d6 --- /dev/null +++ b/arch/parisc/include/uapi/asm/byteorder.h @@ -0,0 +1,6 @@ +#ifndef _PARISC_BYTEORDER_H +#define _PARISC_BYTEORDER_H + +#include + +#endif /* _PARISC_BYTEORDER_H */ diff --git a/arch/parisc/include/uapi/asm/errno.h b/arch/parisc/include/uapi/asm/errno.h new file mode 100644 index 00000000000..135ad6047e5 --- /dev/null +++ b/arch/parisc/include/uapi/asm/errno.h @@ -0,0 +1,127 @@ +#ifndef _PARISC_ERRNO_H +#define _PARISC_ERRNO_H + +#include + +#define ENOMSG 35 /* No message of desired type */ +#define EIDRM 36 /* Identifier removed */ +#define ECHRNG 37 /* Channel number out of range */ +#define EL2NSYNC 38 /* Level 2 not synchronized */ +#define EL3HLT 39 /* Level 3 halted */ +#define EL3RST 40 /* Level 3 reset */ +#define ELNRNG 41 /* Link number out of range */ +#define EUNATCH 42 /* Protocol driver not attached */ +#define ENOCSI 43 /* No CSI structure available */ +#define EL2HLT 44 /* Level 2 halted */ +#define EDEADLK 45 /* Resource deadlock would occur */ +#define EDEADLOCK EDEADLK +#define ENOLCK 46 /* No record locks available */ +#define EILSEQ 47 /* Illegal byte sequence */ + +#define ENONET 50 /* Machine is not on the network */ +#define ENODATA 51 /* No data available */ +#define ETIME 52 /* Timer expired */ +#define ENOSR 53 /* Out of streams resources */ +#define ENOSTR 54 /* Device not a stream */ +#define ENOPKG 55 /* Package not installed */ + +#define ENOLINK 57 /* Link has been severed */ +#define EADV 58 /* Advertise error */ +#define ESRMNT 59 /* Srmount error */ +#define ECOMM 60 /* Communication error on send */ +#define EPROTO 61 /* Protocol error */ + +#define EMULTIHOP 64 /* Multihop attempted */ + +#define EDOTDOT 66 /* RFS specific error */ +#define EBADMSG 67 /* Not a data message */ +#define EUSERS 68 /* Too many users */ +#define EDQUOT 69 /* Quota exceeded */ +#define ESTALE 70 /* Stale NFS file handle */ +#define EREMOTE 71 /* Object is remote */ +#define EOVERFLOW 72 /* Value too large for defined data type */ + +/* these errnos are defined by Linux but not HPUX. */ + +#define EBADE 160 /* Invalid exchange */ +#define EBADR 161 /* Invalid request descriptor */ +#define EXFULL 162 /* Exchange full */ +#define ENOANO 163 /* No anode */ +#define EBADRQC 164 /* Invalid request code */ +#define EBADSLT 165 /* Invalid slot */ +#define EBFONT 166 /* Bad font file format */ +#define ENOTUNIQ 167 /* Name not unique on network */ +#define EBADFD 168 /* File descriptor in bad state */ +#define EREMCHG 169 /* Remote address changed */ +#define ELIBACC 170 /* Can not access a needed shared library */ +#define ELIBBAD 171 /* Accessing a corrupted shared library */ +#define ELIBSCN 172 /* .lib section in a.out corrupted */ +#define ELIBMAX 173 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 174 /* Cannot exec a shared library directly */ +#define ERESTART 175 /* Interrupted system call should be restarted */ +#define ESTRPIPE 176 /* Streams pipe error */ +#define EUCLEAN 177 /* Structure needs cleaning */ +#define ENOTNAM 178 /* Not a XENIX named type file */ +#define ENAVAIL 179 /* No XENIX semaphores available */ +#define EISNAM 180 /* Is a named type file */ +#define EREMOTEIO 181 /* Remote I/O error */ +#define ENOMEDIUM 182 /* No medium found */ +#define EMEDIUMTYPE 183 /* Wrong medium type */ +#define ENOKEY 184 /* Required key not available */ +#define EKEYEXPIRED 185 /* Key has expired */ +#define EKEYREVOKED 186 /* Key has been revoked */ +#define EKEYREJECTED 187 /* Key was rejected by service */ + +/* We now return you to your regularly scheduled HPUX. */ + +#define ENOSYM 215 /* symbol does not exist in executable */ +#define ENOTSOCK 216 /* Socket operation on non-socket */ +#define EDESTADDRREQ 217 /* Destination address required */ +#define EMSGSIZE 218 /* Message too long */ +#define EPROTOTYPE 219 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 220 /* Protocol not available */ +#define EPROTONOSUPPORT 221 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 222 /* Socket type not supported */ +#define EOPNOTSUPP 223 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 224 /* Protocol family not supported */ +#define EAFNOSUPPORT 225 /* Address family not supported by protocol */ +#define EADDRINUSE 226 /* Address already in use */ +#define EADDRNOTAVAIL 227 /* Cannot assign requested address */ +#define ENETDOWN 228 /* Network is down */ +#define ENETUNREACH 229 /* Network is unreachable */ +#define ENETRESET 230 /* Network dropped connection because of reset */ +#define ECONNABORTED 231 /* Software caused connection abort */ +#define ECONNRESET 232 /* Connection reset by peer */ +#define ENOBUFS 233 /* No buffer space available */ +#define EISCONN 234 /* Transport endpoint is already connected */ +#define ENOTCONN 235 /* Transport endpoint is not connected */ +#define ESHUTDOWN 236 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 237 /* Too many references: cannot splice */ +#define EREFUSED ECONNREFUSED /* for HP's NFS apparently */ +#define ETIMEDOUT 238 /* Connection timed out */ +#define ECONNREFUSED 239 /* Connection refused */ +#define EREMOTERELEASE 240 /* Remote peer released connection */ +#define EHOSTDOWN 241 /* Host is down */ +#define EHOSTUNREACH 242 /* No route to host */ + +#define EALREADY 244 /* Operation already in progress */ +#define EINPROGRESS 245 /* Operation now in progress */ +#define EWOULDBLOCK 246 /* Operation would block (Linux returns EAGAIN) */ +#define ENOTEMPTY 247 /* Directory not empty */ +#define ENAMETOOLONG 248 /* File name too long */ +#define ELOOP 249 /* Too many symbolic links encountered */ +#define ENOSYS 251 /* Function not implemented */ + +#define ENOTSUP 252 /* Function not implemented (POSIX.4 / HPUX) */ +#define ECANCELLED 253 /* aio request was canceled before complete (POSIX.4 / HPUX) */ +#define ECANCELED ECANCELLED /* SuSv3 and Solaris wants one 'L' */ + +/* for robust mutexes */ +#define EOWNERDEAD 254 /* Owner died */ +#define ENOTRECOVERABLE 255 /* State not recoverable */ + +#define ERFKILL 256 /* Operation not possible due to RF-kill */ + +#define EHWPOISON 257 /* Memory page has hardware error */ + +#endif diff --git a/arch/parisc/include/uapi/asm/fcntl.h b/arch/parisc/include/uapi/asm/fcntl.h new file mode 100644 index 00000000000..0304b92ccfe --- /dev/null +++ b/arch/parisc/include/uapi/asm/fcntl.h @@ -0,0 +1,40 @@ +#ifndef _PARISC_FCNTL_H +#define _PARISC_FCNTL_H + +#define O_APPEND 000000010 +#define O_BLKSEEK 000000100 /* HPUX only */ +#define O_CREAT 000000400 /* not fcntl */ +#define O_EXCL 000002000 /* not fcntl */ +#define O_LARGEFILE 000004000 +#define __O_SYNC 000100000 +#define O_SYNC (__O_SYNC|O_DSYNC) +#define O_NONBLOCK 000200004 /* HPUX has separate NDELAY & NONBLOCK */ +#define O_NOCTTY 000400000 /* not fcntl */ +#define O_DSYNC 001000000 /* HPUX only */ +#define O_RSYNC 002000000 /* HPUX only */ +#define O_NOATIME 004000000 +#define O_CLOEXEC 010000000 /* set close_on_exec */ + +#define O_DIRECTORY 000010000 /* must be a directory */ +#define O_NOFOLLOW 000000200 /* don't follow links */ +#define O_INVISIBLE 004000000 /* invisible I/O, for DMAPI/XDSM */ + +#define O_PATH 020000000 + +#define F_GETLK64 8 +#define F_SETLK64 9 +#define F_SETLKW64 10 + +#define F_GETOWN 11 /* for sockets. */ +#define F_SETOWN 12 /* for sockets. */ +#define F_SETSIG 13 /* for sockets. */ +#define F_GETSIG 14 /* for sockets. */ + +/* for posix fcntl() and lockf() */ +#define F_RDLCK 01 +#define F_WRLCK 02 +#define F_UNLCK 03 + +#include + +#endif diff --git a/arch/parisc/include/uapi/asm/ioctl.h b/arch/parisc/include/uapi/asm/ioctl.h new file mode 100644 index 00000000000..ec8efa02bed --- /dev/null +++ b/arch/parisc/include/uapi/asm/ioctl.h @@ -0,0 +1,44 @@ +/* + * Linux/PA-RISC Project (http://www.parisc-linux.org/) + * Copyright (C) 1999,2003 Matthew Wilcox < willy at debian . org > + * portions from "linux/ioctl.h for Linux" by H.H. Bergman. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#ifndef _ASM_PARISC_IOCTL_H +#define _ASM_PARISC_IOCTL_H + +/* ioctl command encoding: 32 bits total, command in lower 16 bits, + * size of the parameter structure in the lower 14 bits of the + * upper 16 bits. + * Encoding the size of the parameter structure in the ioctl request + * is useful for catching programs compiled with old versions + * and to avoid overwriting user space outside the user buffer area. + * The highest 2 bits are reserved for indicating the ``access mode''. + * NOTE: This limits the max parameter size to 16kB -1 ! + */ + +/* + * Direction bits. + */ +#define _IOC_NONE 0U +#define _IOC_WRITE 2U +#define _IOC_READ 1U + +#include + +#endif /* _ASM_PARISC_IOCTL_H */ diff --git a/arch/parisc/include/uapi/asm/ioctls.h b/arch/parisc/include/uapi/asm/ioctls.h new file mode 100644 index 00000000000..054ec06f9e2 --- /dev/null +++ b/arch/parisc/include/uapi/asm/ioctls.h @@ -0,0 +1,92 @@ +#ifndef __ARCH_PARISC_IOCTLS_H__ +#define __ARCH_PARISC_IOCTLS_H__ + +#include + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS _IOR('T', 16, struct termios) /* TCGETATTR */ +#define TCSETS _IOW('T', 17, struct termios) /* TCSETATTR */ +#define TCSETSW _IOW('T', 18, struct termios) /* TCSETATTRD */ +#define TCSETSF _IOW('T', 19, struct termios) /* TCSETATTRF */ +#define TCGETA _IOR('T', 1, struct termio) +#define TCSETA _IOW('T', 2, struct termio) +#define TCSETAW _IOW('T', 3, struct termio) +#define TCSETAF _IOW('T', 4, struct termio) +#define TCSBRK _IO('T', 5) +#define TCXONC _IO('T', 6) +#define TCFLSH _IO('T', 7) +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP _IOR('T', 30, int) +#define TIOCSPGRP _IOW('T', 29, int) +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID _IOR('T', 20, int) /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ +#define TIOCGDEV _IOR('T',0x32, int) /* Get primary device node of /dev/console */ +#define TIOCSIG _IOW('T',0x36, int) /* Generate signal on Pty slave */ +#define TIOCVHANGUP 0x5437 + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define FIOQSIZE 0x5460 /* Get exact space used by quota */ + +#define TIOCSTART 0x5461 +#define TIOCSTOP 0x5462 +#define TIOCSLTC 0x5462 + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 +#define TIOCPKT_IOCTL 64 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* _ASM_PARISC_IOCTLS_H */ diff --git a/arch/parisc/include/uapi/asm/ipcbuf.h b/arch/parisc/include/uapi/asm/ipcbuf.h new file mode 100644 index 00000000000..bd956c42578 --- /dev/null +++ b/arch/parisc/include/uapi/asm/ipcbuf.h @@ -0,0 +1,27 @@ +#ifndef __PARISC_IPCBUF_H__ +#define __PARISC_IPCBUF_H__ + +/* + * The ipc64_perm structure for PA-RISC is almost identical to + * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the kernel. + * 'seq' has been changed from long to int so that it's the same size + * on 64-bit kernels as on 32-bit ones. + */ + +struct ipc64_perm +{ + key_t key; + uid_t uid; + gid_t gid; + uid_t cuid; + gid_t cgid; + unsigned short int __pad1; + mode_t mode; + unsigned short int __pad2; + unsigned short int seq; + unsigned int __pad3; + unsigned long long int __unused1; + unsigned long long int __unused2; +}; + +#endif /* __PARISC_IPCBUF_H__ */ diff --git a/arch/parisc/include/uapi/asm/mman.h b/arch/parisc/include/uapi/asm/mman.h new file mode 100644 index 00000000000..12219ebce86 --- /dev/null +++ b/arch/parisc/include/uapi/asm/mman.h @@ -0,0 +1,73 @@ +#ifndef __PARISC_MMAN_H__ +#define __PARISC_MMAN_H__ + +#define PROT_READ 0x1 /* page can be read */ +#define PROT_WRITE 0x2 /* page can be written */ +#define PROT_EXEC 0x4 /* page can be executed */ +#define PROT_SEM 0x8 /* page may be used for atomic ops */ +#define PROT_NONE 0x0 /* page can not be accessed */ +#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ +#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ + +#define MAP_SHARED 0x01 /* Share changes */ +#define MAP_PRIVATE 0x02 /* Changes are private */ +#define MAP_TYPE 0x03 /* Mask for type of mapping */ +#define MAP_FIXED 0x04 /* Interpret addr exactly */ +#define MAP_ANONYMOUS 0x10 /* don't use a file */ + +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_GROWSDOWN 0x8000 /* stack-like segment */ +#define MAP_POPULATE 0x10000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x20000 /* do not block on IO */ +#define MAP_STACK 0x40000 /* give out an address that is best suited for process/thread stacks */ +#define MAP_HUGETLB 0x80000 /* create a huge page mapping */ + +#define MS_SYNC 1 /* synchronous memory sync */ +#define MS_ASYNC 2 /* sync memory asynchronously */ +#define MS_INVALIDATE 4 /* invalidate the caches */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#define MADV_NORMAL 0 /* no further special treatment */ +#define MADV_RANDOM 1 /* expect random page references */ +#define MADV_SEQUENTIAL 2 /* expect sequential page references */ +#define MADV_WILLNEED 3 /* will need these pages */ +#define MADV_DONTNEED 4 /* don't need these pages */ +#define MADV_SPACEAVAIL 5 /* insure that resources are reserved */ +#define MADV_VPS_PURGE 6 /* Purge pages from VM page cache */ +#define MADV_VPS_INHERIT 7 /* Inherit parents page size */ + +/* common/generic parameters */ +#define MADV_REMOVE 9 /* remove these pages & resources */ +#define MADV_DONTFORK 10 /* don't inherit across fork */ +#define MADV_DOFORK 11 /* do inherit across fork */ + +/* The range 12-64 is reserved for page size specification. */ +#define MADV_4K_PAGES 12 /* Use 4K pages */ +#define MADV_16K_PAGES 14 /* Use 16K pages */ +#define MADV_64K_PAGES 16 /* Use 64K pages */ +#define MADV_256K_PAGES 18 /* Use 256K pages */ +#define MADV_1M_PAGES 20 /* Use 1 Megabyte pages */ +#define MADV_4M_PAGES 22 /* Use 4 Megabyte pages */ +#define MADV_16M_PAGES 24 /* Use 16 Megabyte pages */ +#define MADV_64M_PAGES 26 /* Use 64 Megabyte pages */ + +#define MADV_MERGEABLE 65 /* KSM may merge identical pages */ +#define MADV_UNMERGEABLE 66 /* KSM may not merge identical pages */ + +#define MADV_HUGEPAGE 67 /* Worth backing with hugepages */ +#define MADV_NOHUGEPAGE 68 /* Not worth backing with hugepages */ + +#define MADV_DONTDUMP 69 /* Explicity exclude from the core dump, + overrides the coredump filter bits */ +#define MADV_DODUMP 70 /* Clear the MADV_NODUMP flag */ + +/* compatibility flags */ +#define MAP_FILE 0 +#define MAP_VARIABLE 0 + +#endif /* __PARISC_MMAN_H__ */ diff --git a/arch/parisc/include/uapi/asm/msgbuf.h b/arch/parisc/include/uapi/asm/msgbuf.h new file mode 100644 index 00000000000..fe88f264941 --- /dev/null +++ b/arch/parisc/include/uapi/asm/msgbuf.h @@ -0,0 +1,37 @@ +#ifndef _PARISC_MSGBUF_H +#define _PARISC_MSGBUF_H + +/* + * The msqid64_ds structure for parisc architecture, copied from sparc. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; +#ifndef CONFIG_64BIT + unsigned int __pad1; +#endif + __kernel_time_t msg_stime; /* last msgsnd time */ +#ifndef CONFIG_64BIT + unsigned int __pad2; +#endif + __kernel_time_t msg_rtime; /* last msgrcv time */ +#ifndef CONFIG_64BIT + unsigned int __pad3; +#endif + __kernel_time_t msg_ctime; /* last change time */ + unsigned int msg_cbytes; /* current number of bytes on queue */ + unsigned int msg_qnum; /* number of messages in queue */ + unsigned int msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned int __unused1; + unsigned int __unused2; +}; + +#endif /* _PARISC_MSGBUF_H */ diff --git a/arch/parisc/include/uapi/asm/pdc.h b/arch/parisc/include/uapi/asm/pdc.h new file mode 100644 index 00000000000..702498f7705 --- /dev/null +++ b/arch/parisc/include/uapi/asm/pdc.h @@ -0,0 +1,427 @@ +#ifndef _UAPI_PARISC_PDC_H +#define _UAPI_PARISC_PDC_H + +/* + * PDC return values ... + * All PDC calls return a subset of these errors. + */ + +#define PDC_WARN 3 /* Call completed with a warning */ +#define PDC_REQ_ERR_1 2 /* See above */ +#define PDC_REQ_ERR_0 1 /* Call would generate a requestor error */ +#define PDC_OK 0 /* Call completed successfully */ +#define PDC_BAD_PROC -1 /* Called non-existent procedure*/ +#define PDC_BAD_OPTION -2 /* Called with non-existent option */ +#define PDC_ERROR -3 /* Call could not complete without an error */ +#define PDC_NE_MOD -5 /* Module not found */ +#define PDC_NE_CELL_MOD -7 /* Cell module not found */ +#define PDC_INVALID_ARG -10 /* Called with an invalid argument */ +#define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */ +#define PDC_NOT_NARROW -17 /* Narrow mode not supported */ + +/* + * PDC entry points... + */ + +#define PDC_POW_FAIL 1 /* perform a power-fail */ +#define PDC_POW_FAIL_PREPARE 0 /* prepare for powerfail */ + +#define PDC_CHASSIS 2 /* PDC-chassis functions */ +#define PDC_CHASSIS_DISP 0 /* update chassis display */ +#define PDC_CHASSIS_WARN 1 /* return chassis warnings */ +#define PDC_CHASSIS_DISPWARN 2 /* update&return chassis status */ +#define PDC_RETURN_CHASSIS_INFO 128 /* HVERSION dependent: return chassis LED/LCD info */ + +#define PDC_PIM 3 /* Get PIM data */ +#define PDC_PIM_HPMC 0 /* Transfer HPMC data */ +#define PDC_PIM_RETURN_SIZE 1 /* Get Max buffer needed for PIM*/ +#define PDC_PIM_LPMC 2 /* Transfer HPMC data */ +#define PDC_PIM_SOFT_BOOT 3 /* Transfer Soft Boot data */ +#define PDC_PIM_TOC 4 /* Transfer TOC data */ + +#define PDC_MODEL 4 /* PDC model information call */ +#define PDC_MODEL_INFO 0 /* returns information */ +#define PDC_MODEL_BOOTID 1 /* set the BOOT_ID */ +#define PDC_MODEL_VERSIONS 2 /* returns cpu-internal versions*/ +#define PDC_MODEL_SYSMODEL 3 /* return system model info */ +#define PDC_MODEL_ENSPEC 4 /* enable specific option */ +#define PDC_MODEL_DISPEC 5 /* disable specific option */ +#define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */ +#define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */ +/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */ +#define PDC_MODEL_OS64 (1 << 0) +#define PDC_MODEL_OS32 (1 << 1) +#define PDC_MODEL_IOPDIR_FDC (1 << 2) +#define PDC_MODEL_NVA_MASK (3 << 4) +#define PDC_MODEL_NVA_SUPPORTED (0 << 4) +#define PDC_MODEL_NVA_SLOW (1 << 4) +#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4) +#define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */ +#define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */ + +#define PA89_INSTRUCTION_SET 0x4 /* capatibilies returned */ +#define PA90_INSTRUCTION_SET 0x8 + +#define PDC_CACHE 5 /* return/set cache (& TLB) info*/ +#define PDC_CACHE_INFO 0 /* returns information */ +#define PDC_CACHE_SET_COH 1 /* set coherence state */ +#define PDC_CACHE_RET_SPID 2 /* returns space-ID bits */ + +#define PDC_HPA 6 /* return HPA of processor */ +#define PDC_HPA_PROCESSOR 0 +#define PDC_HPA_MODULES 1 + +#define PDC_COPROC 7 /* Co-Processor (usually FP unit(s)) */ +#define PDC_COPROC_CFG 0 /* Co-Processor Cfg (FP unit(s) enabled?) */ + +#define PDC_IODC 8 /* talk to IODC */ +#define PDC_IODC_READ 0 /* read IODC entry point */ +/* PDC_IODC_RI_ * INDEX parameter of PDC_IODC_READ */ +#define PDC_IODC_RI_DATA_BYTES 0 /* IODC Data Bytes */ +/* 1, 2 obsolete - HVERSION dependent*/ +#define PDC_IODC_RI_INIT 3 /* Initialize module */ +#define PDC_IODC_RI_IO 4 /* Module input/output */ +#define PDC_IODC_RI_SPA 5 /* Module input/output */ +#define PDC_IODC_RI_CONFIG 6 /* Module input/output */ +/* 7 obsolete - HVERSION dependent */ +#define PDC_IODC_RI_TEST 8 /* Module input/output */ +#define PDC_IODC_RI_TLB 9 /* Module input/output */ +#define PDC_IODC_NINIT 2 /* non-destructive init */ +#define PDC_IODC_DINIT 3 /* destructive init */ +#define PDC_IODC_MEMERR 4 /* check for memory errors */ +#define PDC_IODC_INDEX_DATA 0 /* get first 16 bytes from mod IODC */ +#define PDC_IODC_BUS_ERROR -4 /* bus error return value */ +#define PDC_IODC_INVALID_INDEX -5 /* invalid index return value */ +#define PDC_IODC_COUNT -6 /* count is too small */ + +#define PDC_TOD 9 /* time-of-day clock (TOD) */ +#define PDC_TOD_READ 0 /* read TOD */ +#define PDC_TOD_WRITE 1 /* write TOD */ + + +#define PDC_STABLE 10 /* stable storage (sprockets) */ +#define PDC_STABLE_READ 0 +#define PDC_STABLE_WRITE 1 +#define PDC_STABLE_RETURN_SIZE 2 +#define PDC_STABLE_VERIFY_CONTENTS 3 +#define PDC_STABLE_INITIALIZE 4 + +#define PDC_NVOLATILE 11 /* often not implemented */ + +#define PDC_ADD_VALID 12 /* Memory validation PDC call */ +#define PDC_ADD_VALID_VERIFY 0 /* Make PDC_ADD_VALID verify region */ + +#define PDC_INSTR 15 /* get instr to invoke PDCE_CHECK() */ + +#define PDC_PROC 16 /* (sprockets) */ + +#define PDC_CONFIG 16 /* (sprockets) */ +#define PDC_CONFIG_DECONFIG 0 +#define PDC_CONFIG_DRECONFIG 1 +#define PDC_CONFIG_DRETURN_CONFIG 2 + +#define PDC_BLOCK_TLB 18 /* manage hardware block-TLB */ +#define PDC_BTLB_INFO 0 /* returns parameter */ +#define PDC_BTLB_INSERT 1 /* insert BTLB entry */ +#define PDC_BTLB_PURGE 2 /* purge BTLB entries */ +#define PDC_BTLB_PURGE_ALL 3 /* purge all BTLB entries */ + +#define PDC_TLB 19 /* manage hardware TLB miss handling */ +#define PDC_TLB_INFO 0 /* returns parameter */ +#define PDC_TLB_SETUP 1 /* set up miss handling */ + +#define PDC_MEM 20 /* Manage memory */ +#define PDC_MEM_MEMINFO 0 +#define PDC_MEM_ADD_PAGE 1 +#define PDC_MEM_CLEAR_PDT 2 +#define PDC_MEM_READ_PDT 3 +#define PDC_MEM_RESET_CLEAR 4 +#define PDC_MEM_GOODMEM 5 +#define PDC_MEM_TABLE 128 /* Non contig mem map (sprockets) */ +#define PDC_MEM_RETURN_ADDRESS_TABLE PDC_MEM_TABLE +#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE 131 +#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES 132 +#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133 + +#define PDC_MEM_RET_SBE_REPLACED 5 /* PDC_MEM return values */ +#define PDC_MEM_RET_DUPLICATE_ENTRY 4 +#define PDC_MEM_RET_BUF_SIZE_SMALL 1 +#define PDC_MEM_RET_PDT_FULL -11 +#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL + +#define PDC_PSW 21 /* Get/Set default System Mask */ +#define PDC_PSW_MASK 0 /* Return mask */ +#define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */ +#define PDC_PSW_SET_DEFAULTS 2 /* Set default */ +#define PDC_PSW_ENDIAN_BIT 1 /* set for big endian */ +#define PDC_PSW_WIDE_BIT 2 /* set for wide mode */ + +#define PDC_SYSTEM_MAP 22 /* find system modules */ +#define PDC_FIND_MODULE 0 +#define PDC_FIND_ADDRESS 1 +#define PDC_TRANSLATE_PATH 2 + +#define PDC_SOFT_POWER 23 /* soft power switch */ +#define PDC_SOFT_POWER_INFO 0 /* return info about the soft power switch */ +#define PDC_SOFT_POWER_ENABLE 1 /* enable/disable soft power switch */ + + +/* HVERSION dependent */ + +/* The PDC_MEM_MAP calls */ +#define PDC_MEM_MAP 128 /* on s700: return page info */ +#define PDC_MEM_MAP_HPA 0 /* returns hpa of a module */ + +#define PDC_EEPROM 129 /* EEPROM access */ +#define PDC_EEPROM_READ_WORD 0 +#define PDC_EEPROM_WRITE_WORD 1 +#define PDC_EEPROM_READ_BYTE 2 +#define PDC_EEPROM_WRITE_BYTE 3 +#define PDC_EEPROM_EEPROM_PASSWORD -1000 + +#define PDC_NVM 130 /* NVM (non-volatile memory) access */ +#define PDC_NVM_READ_WORD 0 +#define PDC_NVM_WRITE_WORD 1 +#define PDC_NVM_READ_BYTE 2 +#define PDC_NVM_WRITE_BYTE 3 + +#define PDC_SEED_ERROR 132 /* (sprockets) */ + +#define PDC_IO 135 /* log error info, reset IO system */ +#define PDC_IO_READ_AND_CLEAR_ERRORS 0 +#define PDC_IO_RESET 1 +#define PDC_IO_RESET_DEVICES 2 +/* sets bits 6&7 (little endian) of the HcControl Register */ +#define PDC_IO_USB_SUSPEND 0xC000000000000000 +#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5 /* return value */ +#define PDC_IO_NO_SUSPEND -6 /* return value */ + +#define PDC_BROADCAST_RESET 136 /* reset all processors */ +#define PDC_DO_RESET 0 /* option: perform a broadcast reset */ +#define PDC_DO_FIRM_TEST_RESET 1 /* Do broadcast reset with bitmap */ +#define PDC_BR_RECONFIGURATION 2 /* reset w/reconfiguration */ +#define PDC_FIRM_TEST_MAGIC 0xab9ec36fUL /* for this reboot only */ + +#define PDC_LAN_STATION_ID 138 /* Hversion dependent mechanism for */ +#define PDC_LAN_STATION_ID_READ 0 /* getting the lan station address */ + +#define PDC_LAN_STATION_ID_SIZE 6 + +#define PDC_CHECK_RANGES 139 /* (sprockets) */ + +#define PDC_NV_SECTIONS 141 /* (sprockets) */ + +#define PDC_PERFORMANCE 142 /* performance monitoring */ + +#define PDC_SYSTEM_INFO 143 /* system information */ +#define PDC_SYSINFO_RETURN_INFO_SIZE 0 +#define PDC_SYSINFO_RRETURN_SYS_INFO 1 +#define PDC_SYSINFO_RRETURN_ERRORS 2 +#define PDC_SYSINFO_RRETURN_WARNINGS 3 +#define PDC_SYSINFO_RETURN_REVISIONS 4 +#define PDC_SYSINFO_RRETURN_DIAGNOSE 5 +#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005 + +#define PDC_RDR 144 /* (sprockets) */ +#define PDC_RDR_READ_BUFFER 0 +#define PDC_RDR_READ_SINGLE 1 +#define PDC_RDR_WRITE_SINGLE 2 + +#define PDC_INTRIGUE 145 /* (sprockets) */ +#define PDC_INTRIGUE_WRITE_BUFFER 0 +#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1 +#define PDC_INTRIGUE_START_CPU_COUNTERS 2 +#define PDC_INTRIGUE_STOP_CPU_COUNTERS 3 + +#define PDC_STI 146 /* STI access */ +/* same as PDC_PCI_XXX values (see below) */ + +/* Legacy PDC definitions for same stuff */ +#define PDC_PCI_INDEX 147 +#define PDC_PCI_INTERFACE_INFO 0 +#define PDC_PCI_SLOT_INFO 1 +#define PDC_PCI_INFLIGHT_BYTES 2 +#define PDC_PCI_READ_CONFIG 3 +#define PDC_PCI_WRITE_CONFIG 4 +#define PDC_PCI_READ_PCI_IO 5 +#define PDC_PCI_WRITE_PCI_IO 6 +#define PDC_PCI_READ_CONFIG_DELAY 7 +#define PDC_PCI_UPDATE_CONFIG_DELAY 8 +#define PDC_PCI_PCI_PATH_TO_PCI_HPA 9 +#define PDC_PCI_PCI_HPA_TO_PCI_PATH 10 +#define PDC_PCI_PCI_PATH_TO_PCI_BUS 11 +#define PDC_PCI_PCI_RESERVED 12 +#define PDC_PCI_PCI_INT_ROUTE_SIZE 13 +#define PDC_PCI_GET_INT_TBL_SIZE PDC_PCI_PCI_INT_ROUTE_SIZE +#define PDC_PCI_PCI_INT_ROUTE 14 +#define PDC_PCI_GET_INT_TBL PDC_PCI_PCI_INT_ROUTE +#define PDC_PCI_READ_MON_TYPE 15 +#define PDC_PCI_WRITE_MON_TYPE 16 + + +/* Get SCSI Interface Card info: SDTR, SCSI ID, mode (SE vs LVD) */ +#define PDC_INITIATOR 163 +#define PDC_GET_INITIATOR 0 +#define PDC_SET_INITIATOR 1 +#define PDC_DELETE_INITIATOR 2 +#define PDC_RETURN_TABLE_SIZE 3 +#define PDC_RETURN_TABLE 4 + +#define PDC_LINK 165 /* (sprockets) */ +#define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */ +#define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */ + +/* cl_class + * page 3-33 of IO-Firmware ARS + * IODC ENTRY_INIT(Search first) RET[1] + */ +#define CL_NULL 0 /* invalid */ +#define CL_RANDOM 1 /* random access (as disk) */ +#define CL_SEQU 2 /* sequential access (as tape) */ +#define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */ +#define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */ +#define CL_DISPL 9 /* half-duplex console (display) */ +#define CL_FC 10 /* FiberChannel access media */ + +/* IODC ENTRY_INIT() */ +#define ENTRY_INIT_SRCH_FRST 2 +#define ENTRY_INIT_SRCH_NEXT 3 +#define ENTRY_INIT_MOD_DEV 4 +#define ENTRY_INIT_DEV 5 +#define ENTRY_INIT_MOD 6 +#define ENTRY_INIT_MSG 9 + +/* IODC ENTRY_IO() */ +#define ENTRY_IO_BOOTIN 0 +#define ENTRY_IO_BOOTOUT 1 +#define ENTRY_IO_CIN 2 +#define ENTRY_IO_COUT 3 +#define ENTRY_IO_CLOSE 4 +#define ENTRY_IO_GETMSG 9 +#define ENTRY_IO_BBLOCK_IN 16 +#define ENTRY_IO_BBLOCK_OUT 17 + +/* IODC ENTRY_SPA() */ + +/* IODC ENTRY_CONFIG() */ + +/* IODC ENTRY_TEST() */ + +/* IODC ENTRY_TLB() */ + +/* constants for OS (NVM...) */ +#define OS_ID_NONE 0 /* Undefined OS ID */ +#define OS_ID_HPUX 1 /* HP-UX OS */ +#define OS_ID_MPEXL 2 /* MPE XL OS */ +#define OS_ID_OSF 3 /* OSF OS */ +#define OS_ID_HPRT 4 /* HP-RT OS */ +#define OS_ID_NOVEL 5 /* NOVELL OS */ +#define OS_ID_LINUX 6 /* Linux */ + + +/* constants for PDC_CHASSIS */ +#define OSTAT_OFF 0 +#define OSTAT_FLT 1 +#define OSTAT_TEST 2 +#define OSTAT_INIT 3 +#define OSTAT_SHUT 4 +#define OSTAT_WARN 5 +#define OSTAT_RUN 6 +#define OSTAT_ON 7 + +/* Page Zero constant offsets used by the HPMC handler */ +#define BOOT_CONSOLE_HPA_OFFSET 0x3c0 +#define BOOT_CONSOLE_SPA_OFFSET 0x3c4 +#define BOOT_CONSOLE_PATH_OFFSET 0x3a8 + +/* size of the pdc_result buffer for firmware.c */ +#define NUM_PDC_RESULT 32 + +#if !defined(__ASSEMBLY__) + +#include + + +/* flags of the device_path */ +#define PF_AUTOBOOT 0x80 +#define PF_AUTOSEARCH 0x40 +#define PF_TIMER 0x0F + +struct device_path { /* page 1-69 */ + unsigned char flags; /* flags see above! */ + unsigned char bc[6]; /* bus converter routing info */ + unsigned char mod; + unsigned int layers[6];/* device-specific layer-info */ +} __attribute__((aligned(8))) ; + +struct pz_device { + struct device_path dp; /* see above */ + /* struct iomod *hpa; */ + unsigned int hpa; /* HPA base address */ + /* char *spa; */ + unsigned int spa; /* SPA base address */ + /* int (*iodc_io)(struct iomod*, ...); */ + unsigned int iodc_io; /* device entry point */ + short pad; /* reserved */ + unsigned short cl_class;/* see below */ +} __attribute__((aligned(8))) ; + +struct zeropage { + /* [0x000] initialize vectors (VEC) */ + unsigned int vec_special; /* must be zero */ + /* int (*vec_pow_fail)(void);*/ + unsigned int vec_pow_fail; /* power failure handler */ + /* int (*vec_toc)(void); */ + unsigned int vec_toc; + unsigned int vec_toclen; + /* int (*vec_rendz)(void); */ + unsigned int vec_rendz; + int vec_pow_fail_flen; + int vec_pad[10]; + + /* [0x040] reserved processor dependent */ + int pad0[112]; + + /* [0x200] reserved */ + int pad1[84]; + + /* [0x350] memory configuration (MC) */ + int memc_cont; /* contiguous mem size (bytes) */ + int memc_phsize; /* physical memory size */ + int memc_adsize; /* additional mem size, bytes of SPA space used by PDC */ + unsigned int mem_pdc_hi; /* used for 64-bit */ + + /* [0x360] various parameters for the boot-CPU */ + /* unsigned int *mem_booterr[8]; */ + unsigned int mem_booterr[8]; /* ptr to boot errors */ + unsigned int mem_free; /* first location, where OS can be loaded */ + /* struct iomod *mem_hpa; */ + unsigned int mem_hpa; /* HPA of the boot-CPU */ + /* int (*mem_pdc)(int, ...); */ + unsigned int mem_pdc; /* PDC entry point */ + unsigned int mem_10msec; /* number of clock ticks in 10msec */ + + /* [0x390] initial memory module (IMM) */ + /* struct iomod *imm_hpa; */ + unsigned int imm_hpa; /* HPA of the IMM */ + int imm_soft_boot; /* 0 = was hard boot, 1 = was soft boot */ + unsigned int imm_spa_size; /* SPA size of the IMM in bytes */ + unsigned int imm_max_mem; /* bytes of mem in IMM */ + + /* [0x3A0] boot console, display device and keyboard */ + struct pz_device mem_cons; /* description of console device */ + struct pz_device mem_boot; /* description of boot device */ + struct pz_device mem_kbd; /* description of keyboard device */ + + /* [0x430] reserved */ + int pad430[116]; + + /* [0x600] processor dependent */ + __u32 pad600[1]; + __u32 proc_sti; /* pointer to STI ROM */ + __u32 pad608[126]; +}; + +#endif /* !defined(__ASSEMBLY__) */ + +#endif /* _UAPI_PARISC_PDC_H */ diff --git a/arch/parisc/include/uapi/asm/posix_types.h b/arch/parisc/include/uapi/asm/posix_types.h new file mode 100644 index 00000000000..b9344256f76 --- /dev/null +++ b/arch/parisc/include/uapi/asm/posix_types.h @@ -0,0 +1,24 @@ +#ifndef __ARCH_PARISC_POSIX_TYPES_H +#define __ARCH_PARISC_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned short __kernel_mode_t; +#define __kernel_mode_t __kernel_mode_t + +typedef unsigned short __kernel_ipc_pid_t; +#define __kernel_ipc_pid_t __kernel_ipc_pid_t + +typedef int __kernel_suseconds_t; +#define __kernel_suseconds_t __kernel_suseconds_t + +typedef long long __kernel_off64_t; +typedef unsigned long long __kernel_ino64_t; + +#include + +#endif diff --git a/arch/parisc/include/uapi/asm/ptrace.h b/arch/parisc/include/uapi/asm/ptrace.h new file mode 100644 index 00000000000..c4fa6c8b9ad --- /dev/null +++ b/arch/parisc/include/uapi/asm/ptrace.h @@ -0,0 +1,47 @@ +/* written by Philipp Rumpf, Copyright (C) 1999 SuSE GmbH Nuernberg +** Copyright (C) 2000 Grant Grundler, Hewlett-Packard +*/ +#ifndef _UAPI_PARISC_PTRACE_H +#define _UAPI_PARISC_PTRACE_H + + +#include + +/* This struct defines the way the registers are stored on the + * stack during a system call. + * + * N.B. gdb/strace care about the size and offsets within this + * structure. If you change things, you may break object compatibility + * for those applications. + */ + +struct pt_regs { + unsigned long gr[32]; /* PSW is in gr[0] */ + __u64 fr[32]; + unsigned long sr[ 8]; + unsigned long iasq[2]; + unsigned long iaoq[2]; + unsigned long cr27; + unsigned long pad0; /* available for other uses */ + unsigned long orig_r28; + unsigned long ksp; + unsigned long kpc; + unsigned long sar; /* CR11 */ + unsigned long iir; /* CR19 */ + unsigned long isr; /* CR20 */ + unsigned long ior; /* CR21 */ + unsigned long ipsw; /* CR22 */ +}; + +/* + * The numbers chosen here are somewhat arbitrary but absolutely MUST + * not overlap with any of the number assigned in . + * + * These ones are taken from IA-64 on the assumption that theirs are + * the most correct (and we also want to support PTRACE_SINGLEBLOCK + * since we have taken branch traps too) + */ +#define PTRACE_SINGLEBLOCK 12 /* resume execution until next branch */ + + +#endif /* _UAPI_PARISC_PTRACE_H */ diff --git a/arch/parisc/include/uapi/asm/resource.h b/arch/parisc/include/uapi/asm/resource.h new file mode 100644 index 00000000000..8b06343b62e --- /dev/null +++ b/arch/parisc/include/uapi/asm/resource.h @@ -0,0 +1,7 @@ +#ifndef _ASM_PARISC_RESOURCE_H +#define _ASM_PARISC_RESOURCE_H + +#define _STK_LIM_MAX 10 * _STK_LIM +#include + +#endif diff --git a/arch/parisc/include/uapi/asm/sembuf.h b/arch/parisc/include/uapi/asm/sembuf.h new file mode 100644 index 00000000000..1e59ffd3bd1 --- /dev/null +++ b/arch/parisc/include/uapi/asm/sembuf.h @@ -0,0 +1,29 @@ +#ifndef _PARISC_SEMBUF_H +#define _PARISC_SEMBUF_H + +/* + * The semid64_ds structure for parisc architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ +#ifndef CONFIG_64BIT + unsigned int __pad1; +#endif + __kernel_time_t sem_otime; /* last semop time */ +#ifndef CONFIG_64BIT + unsigned int __pad2; +#endif + __kernel_time_t sem_ctime; /* last change time */ + unsigned int sem_nsems; /* no. of semaphores in array */ + unsigned int __unused1; + unsigned int __unused2; +}; + +#endif /* _PARISC_SEMBUF_H */ diff --git a/arch/parisc/include/uapi/asm/setup.h b/arch/parisc/include/uapi/asm/setup.h new file mode 100644 index 00000000000..7da2e5b8747 --- /dev/null +++ b/arch/parisc/include/uapi/asm/setup.h @@ -0,0 +1,6 @@ +#ifndef _PARISC_SETUP_H +#define _PARISC_SETUP_H + +#define COMMAND_LINE_SIZE 1024 + +#endif /* _PARISC_SETUP_H */ diff --git a/arch/parisc/include/uapi/asm/shmbuf.h b/arch/parisc/include/uapi/asm/shmbuf.h new file mode 100644 index 00000000000..0a3eada1863 --- /dev/null +++ b/arch/parisc/include/uapi/asm/shmbuf.h @@ -0,0 +1,58 @@ +#ifndef _PARISC_SHMBUF_H +#define _PARISC_SHMBUF_H + +/* + * The shmid64_ds structure for parisc architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ +#ifndef CONFIG_64BIT + unsigned int __pad1; +#endif + __kernel_time_t shm_atime; /* last attach time */ +#ifndef CONFIG_64BIT + unsigned int __pad2; +#endif + __kernel_time_t shm_dtime; /* last detach time */ +#ifndef CONFIG_64BIT + unsigned int __pad3; +#endif + __kernel_time_t shm_ctime; /* last change time */ +#ifndef CONFIG_64BIT + unsigned int __pad4; +#endif + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned int shm_nattch; /* no. of current attaches */ + unsigned int __unused1; + unsigned int __unused2; +}; + +#ifdef CONFIG_64BIT +/* The 'unsigned int' (formerly 'unsigned long') data types below will + * ensure that a 32-bit app calling shmctl(*,IPC_INFO,*) will work on + * a wide kernel, but if some of these values are meant to contain pointers + * they may need to be 'long long' instead. -PB XXX FIXME + */ +#endif +struct shminfo64 { + unsigned int shmmax; + unsigned int shmmin; + unsigned int shmmni; + unsigned int shmseg; + unsigned int shmall; + unsigned int __unused1; + unsigned int __unused2; + unsigned int __unused3; + unsigned int __unused4; +}; + +#endif /* _PARISC_SHMBUF_H */ diff --git a/arch/parisc/include/uapi/asm/sigcontext.h b/arch/parisc/include/uapi/asm/sigcontext.h new file mode 100644 index 00000000000..27ef31bb3b6 --- /dev/null +++ b/arch/parisc/include/uapi/asm/sigcontext.h @@ -0,0 +1,20 @@ +#ifndef _ASMPARISC_SIGCONTEXT_H +#define _ASMPARISC_SIGCONTEXT_H + +#define PARISC_SC_FLAG_ONSTACK 1<<0 +#define PARISC_SC_FLAG_IN_SYSCALL 1<<1 + +/* We will add more stuff here as it becomes necessary, until we know + it works. */ +struct sigcontext { + unsigned long sc_flags; + + unsigned long sc_gr[32]; /* PSW in sc_gr[0] */ + unsigned long long sc_fr[32]; /* FIXME, do we need other state info? */ + unsigned long sc_iasq[2]; + unsigned long sc_iaoq[2]; + unsigned long sc_sar; /* cr11 */ +}; + + +#endif diff --git a/arch/parisc/include/uapi/asm/siginfo.h b/arch/parisc/include/uapi/asm/siginfo.h new file mode 100644 index 00000000000..d7034728f37 --- /dev/null +++ b/arch/parisc/include/uapi/asm/siginfo.h @@ -0,0 +1,9 @@ +#ifndef _PARISC_SIGINFO_H +#define _PARISC_SIGINFO_H + +#include + +#undef NSIGTRAP +#define NSIGTRAP 4 + +#endif diff --git a/arch/parisc/include/uapi/asm/signal.h b/arch/parisc/include/uapi/asm/signal.h new file mode 100644 index 00000000000..b1ddaa24337 --- /dev/null +++ b/arch/parisc/include/uapi/asm/signal.h @@ -0,0 +1,118 @@ +#ifndef _UAPI_ASM_PARISC_SIGNAL_H +#define _UAPI_ASM_PARISC_SIGNAL_H + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGEMT 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGBUS 10 +#define SIGSEGV 11 +#define SIGSYS 12 /* Linux doesn't use this */ +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGUSR1 16 +#define SIGUSR2 17 +#define SIGCHLD 18 +#define SIGPWR 19 +#define SIGVTALRM 20 +#define SIGPROF 21 +#define SIGIO 22 +#define SIGPOLL SIGIO +#define SIGWINCH 23 +#define SIGSTOP 24 +#define SIGTSTP 25 +#define SIGCONT 26 +#define SIGTTIN 27 +#define SIGTTOU 28 +#define SIGURG 29 +#define SIGLOST 30 /* Linux doesn't use this either */ +#define SIGUNUSED 31 +#define SIGRESERVE SIGUNUSED + +#define SIGXCPU 33 +#define SIGXFSZ 34 +#define SIGSTKFLT 36 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 37 +#define SIGRTMAX _NSIG /* it's 44 under HP/UX */ + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_ONSTACK 0x00000001 +#define SA_RESETHAND 0x00000004 +#define SA_NOCLDSTOP 0x00000008 +#define SA_SIGINFO 0x00000010 +#define SA_NODEFER 0x00000020 +#define SA_RESTART 0x00000040 +#define SA_NOCLDWAIT 0x00000080 +#define _SA_SIGGFAULT 0x00000100 /* HPUX */ + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 /* obsolete -- ignored */ + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + + +#define SIG_BLOCK 0 /* for blocking signals */ +#define SIG_UNBLOCK 1 /* for unblocking signals */ +#define SIG_SETMASK 2 /* for setting the signal mask */ + +#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ +#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ +#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ + +# ifndef __ASSEMBLY__ + +# include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +/* Type of a signal handler. */ +#ifdef CONFIG_64BIT +/* function pointers on 64-bit parisc are pointers to little structs and the + * compiler doesn't support code which changes or tests the address of + * the function in the little struct. This is really ugly -PB + */ +typedef char __user *__sighandler_t; +#else +typedef void __signalfn_t(int); +typedef __signalfn_t __user *__sighandler_t; +#endif + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#endif /* !__ASSEMBLY */ +#endif /* _UAPI_ASM_PARISC_SIGNAL_H */ diff --git a/arch/parisc/include/uapi/asm/socket.h b/arch/parisc/include/uapi/asm/socket.h new file mode 100644 index 00000000000..1b52c2c31a7 --- /dev/null +++ b/arch/parisc/include/uapi/asm/socket.h @@ -0,0 +1,77 @@ +#ifndef _ASM_SOCKET_H +#define _ASM_SOCKET_H + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 0xffff + +#define SO_DEBUG 0x0001 +#define SO_REUSEADDR 0x0004 +#define SO_KEEPALIVE 0x0008 +#define SO_DONTROUTE 0x0010 +#define SO_BROADCAST 0x0020 +#define SO_LINGER 0x0080 +#define SO_OOBINLINE 0x0100 +/* To add :#define SO_REUSEPORT 0x0200 */ +#define SO_SNDBUF 0x1001 +#define SO_RCVBUF 0x1002 +#define SO_SNDBUFFORCE 0x100a +#define SO_RCVBUFFORCE 0x100b +#define SO_SNDLOWAT 0x1003 +#define SO_RCVLOWAT 0x1004 +#define SO_SNDTIMEO 0x1005 +#define SO_RCVTIMEO 0x1006 +#define SO_ERROR 0x1007 +#define SO_TYPE 0x1008 +#define SO_PROTOCOL 0x1028 +#define SO_DOMAIN 0x1029 +#define SO_PEERNAME 0x2000 + +#define SO_NO_CHECK 0x400b +#define SO_PRIORITY 0x400c +#define SO_BSDCOMPAT 0x400e +#define SO_PASSCRED 0x4010 +#define SO_PEERCRED 0x4011 +#define SO_TIMESTAMP 0x4012 +#define SCM_TIMESTAMP SO_TIMESTAMP +#define SO_TIMESTAMPNS 0x4013 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 0x4016 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 0x4017 +#define SO_SECURITY_ENCRYPTION_NETWORK 0x4018 + +#define SO_BINDTODEVICE 0x4019 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 0x401a +#define SO_DETACH_FILTER 0x401b + +#define SO_ACCEPTCONN 0x401c + +#define SO_PEERSEC 0x401d +#define SO_PASSSEC 0x401e + +#define SO_MARK 0x401f + +#define SO_TIMESTAMPING 0x4020 +#define SCM_TIMESTAMPING SO_TIMESTAMPING + +#define SO_RXQ_OVFL 0x4021 + +#define SO_WIFI_STATUS 0x4022 +#define SCM_WIFI_STATUS SO_WIFI_STATUS +#define SO_PEEK_OFF 0x4023 + +/* Instruct lower device to use last 4-bytes of skb data as FCS */ +#define SO_NOFCS 0x4024 + + +/* O_NONBLOCK clashes with the bits used for socket types. Therefore we + * have to define SOCK_NONBLOCK to a different value here. + */ +#define SOCK_NONBLOCK 0x40000000 + +#endif /* _ASM_SOCKET_H */ diff --git a/arch/parisc/include/uapi/asm/sockios.h b/arch/parisc/include/uapi/asm/sockios.h new file mode 100644 index 00000000000..dabfbc7483f --- /dev/null +++ b/arch/parisc/include/uapi/asm/sockios.h @@ -0,0 +1,13 @@ +#ifndef __ARCH_PARISC_SOCKIOS__ +#define __ARCH_PARISC_SOCKIOS__ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ +#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ + +#endif diff --git a/arch/parisc/include/uapi/asm/stat.h b/arch/parisc/include/uapi/asm/stat.h new file mode 100644 index 00000000000..d76fbda5d62 --- /dev/null +++ b/arch/parisc/include/uapi/asm/stat.h @@ -0,0 +1,100 @@ +#ifndef _PARISC_STAT_H +#define _PARISC_STAT_H + +#include + +struct stat { + unsigned int st_dev; /* dev_t is 32 bits on parisc */ + ino_t st_ino; /* 32 bits */ + mode_t st_mode; /* 16 bits */ + unsigned short st_nlink; /* 16 bits */ + unsigned short st_reserved1; /* old st_uid */ + unsigned short st_reserved2; /* old st_gid */ + unsigned int st_rdev; + off_t st_size; + time_t st_atime; + unsigned int st_atime_nsec; + time_t st_mtime; + unsigned int st_mtime_nsec; + time_t st_ctime; + unsigned int st_ctime_nsec; + int st_blksize; + int st_blocks; + unsigned int __unused1; /* ACL stuff */ + unsigned int __unused2; /* network */ + ino_t __unused3; /* network */ + unsigned int __unused4; /* cnodes */ + unsigned short __unused5; /* netsite */ + short st_fstype; + unsigned int st_realdev; + unsigned short st_basemode; + unsigned short st_spareshort; + uid_t st_uid; + gid_t st_gid; + unsigned int st_spare4[3]; +}; + +#define STAT_HAVE_NSEC + +typedef __kernel_off64_t off64_t; + +struct hpux_stat64 { + unsigned int st_dev; /* dev_t is 32 bits on parisc */ + ino_t st_ino; /* 32 bits */ + mode_t st_mode; /* 16 bits */ + unsigned short st_nlink; /* 16 bits */ + unsigned short st_reserved1; /* old st_uid */ + unsigned short st_reserved2; /* old st_gid */ + unsigned int st_rdev; + off64_t st_size; + time_t st_atime; + unsigned int st_spare1; + time_t st_mtime; + unsigned int st_spare2; + time_t st_ctime; + unsigned int st_spare3; + int st_blksize; + __u64 st_blocks; + unsigned int __unused1; /* ACL stuff */ + unsigned int __unused2; /* network */ + ino_t __unused3; /* network */ + unsigned int __unused4; /* cnodes */ + unsigned short __unused5; /* netsite */ + short st_fstype; + unsigned int st_realdev; + unsigned short st_basemode; + unsigned short st_spareshort; + uid_t st_uid; + gid_t st_gid; + unsigned int st_spare4[3]; +}; + +/* This is the struct that 32-bit userspace applications are expecting. + * How 64-bit apps are going to be compiled, I have no idea. But at least + * this way, we don't have a wrapper in the kernel. + */ +struct stat64 { + unsigned long long st_dev; + unsigned int __pad1; + + unsigned int __st_ino; /* Not actually filled in */ + unsigned int st_mode; + unsigned int st_nlink; + unsigned int st_uid; + unsigned int st_gid; + unsigned long long st_rdev; + unsigned int __pad2; + signed long long st_size; + signed int st_blksize; + + signed long long st_blocks; + signed int st_atime; + unsigned int st_atime_nsec; + signed int st_mtime; + unsigned int st_mtime_nsec; + signed int st_ctime; + unsigned int st_ctime_nsec; + unsigned long long st_ino; +}; + +#endif diff --git a/arch/parisc/include/uapi/asm/statfs.h b/arch/parisc/include/uapi/asm/statfs.h new file mode 100644 index 00000000000..324bea905dc --- /dev/null +++ b/arch/parisc/include/uapi/asm/statfs.h @@ -0,0 +1,7 @@ +#ifndef _PARISC_STATFS_H +#define _PARISC_STATFS_H + +#define __statfs_word long +#include + +#endif diff --git a/arch/parisc/include/uapi/asm/swab.h b/arch/parisc/include/uapi/asm/swab.h new file mode 100644 index 00000000000..e78403b129e --- /dev/null +++ b/arch/parisc/include/uapi/asm/swab.h @@ -0,0 +1,66 @@ +#ifndef _PARISC_SWAB_H +#define _PARISC_SWAB_H + +#include +#include + +#define __SWAB_64_THRU_32__ + +static inline __attribute_const__ __u16 __arch_swab16(__u16 x) +{ + __asm__("dep %0, 15, 8, %0\n\t" /* deposit 00ab -> 0bab */ + "shd %%r0, %0, 8, %0" /* shift 000000ab -> 00ba */ + : "=r" (x) + : "0" (x)); + return x; +} +#define __arch_swab16 __arch_swab16 + +static inline __attribute_const__ __u32 __arch_swab24(__u32 x) +{ + __asm__("shd %0, %0, 8, %0\n\t" /* shift xabcxabc -> cxab */ + "dep %0, 15, 8, %0\n\t" /* deposit cxab -> cbab */ + "shd %%r0, %0, 8, %0" /* shift 0000cbab -> 0cba */ + : "=r" (x) + : "0" (x)); + return x; +} + +static inline __attribute_const__ __u32 __arch_swab32(__u32 x) +{ + unsigned int temp; + __asm__("shd %0, %0, 16, %1\n\t" /* shift abcdabcd -> cdab */ + "dep %1, 15, 8, %1\n\t" /* deposit cdab -> cbab */ + "shd %0, %1, 8, %0" /* shift abcdcbab -> dcba */ + : "=r" (x), "=&r" (temp) + : "0" (x)); + return x; +} +#define __arch_swab32 __arch_swab32 + +#if BITS_PER_LONG > 32 +/* +** From "PA-RISC 2.0 Architecture", HP Professional Books. +** See Appendix I page 8 , "Endian Byte Swapping". +** +** Pretty cool algorithm: (* == zero'd bits) +** PERMH 01234567 -> 67452301 into %0 +** HSHL 67452301 -> 7*5*3*1* into %1 +** HSHR 67452301 -> *6*4*2*0 into %0 +** OR %0 | %1 -> 76543210 into %0 (all done!) +*/ +static inline __attribute_const__ __u64 __arch_swab64(__u64 x) +{ + __u64 temp; + __asm__("permh,3210 %0, %0\n\t" + "hshl %0, 8, %1\n\t" + "hshr,u %0, 8, %0\n\t" + "or %1, %0, %0" + : "=r" (x), "=&r" (temp) + : "0" (x)); + return x; +} +#define __arch_swab64 __arch_swab64 +#endif /* BITS_PER_LONG > 32 */ + +#endif /* _PARISC_SWAB_H */ diff --git a/arch/parisc/include/uapi/asm/termbits.h b/arch/parisc/include/uapi/asm/termbits.h new file mode 100644 index 00000000000..d1ab92177a5 --- /dev/null +++ b/arch/parisc/include/uapi/asm/termbits.h @@ -0,0 +1,201 @@ +#ifndef __ARCH_PARISC_TERMBITS_H__ +#define __ARCH_PARISC_TERMBITS_H__ + +#include + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0040000 +#define IUTF8 0100000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 +#define EXTPROC 0200000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif diff --git a/arch/parisc/include/uapi/asm/termios.h b/arch/parisc/include/uapi/asm/termios.h new file mode 100644 index 00000000000..f3377395070 --- /dev/null +++ b/arch/parisc/include/uapi/asm/termios.h @@ -0,0 +1,43 @@ +#ifndef _UAPI_PARISC_TERMIOS_H +#define _UAPI_PARISC_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + + +#endif /* _UAPI_PARISC_TERMIOS_H */ diff --git a/arch/parisc/include/uapi/asm/types.h b/arch/parisc/include/uapi/asm/types.h new file mode 100644 index 00000000000..8866f9bbdea --- /dev/null +++ b/arch/parisc/include/uapi/asm/types.h @@ -0,0 +1,6 @@ +#ifndef _PARISC_TYPES_H +#define _PARISC_TYPES_H + +#include + +#endif diff --git a/arch/parisc/include/uapi/asm/unistd.h b/arch/parisc/include/uapi/asm/unistd.h new file mode 100644 index 00000000000..e178f30f2cc --- /dev/null +++ b/arch/parisc/include/uapi/asm/unistd.h @@ -0,0 +1,837 @@ +#ifndef _UAPI_ASM_PARISC_UNISTD_H_ +#define _UAPI_ASM_PARISC_UNISTD_H_ + +/* + * This file contains the system call numbers. + */ + +/* + * HP-UX system calls get their native numbers for binary compatibility. + */ + +#define __NR_HPUX_exit 1 +#define __NR_HPUX_fork 2 +#define __NR_HPUX_read 3 +#define __NR_HPUX_write 4 +#define __NR_HPUX_open 5 +#define __NR_HPUX_close 6 +#define __NR_HPUX_wait 7 +#define __NR_HPUX_creat 8 +#define __NR_HPUX_link 9 +#define __NR_HPUX_unlink 10 +#define __NR_HPUX_execv 11 +#define __NR_HPUX_chdir 12 +#define __NR_HPUX_time 13 +#define __NR_HPUX_mknod 14 +#define __NR_HPUX_chmod 15 +#define __NR_HPUX_chown 16 +#define __NR_HPUX_break 17 +#define __NR_HPUX_lchmod 18 +#define __NR_HPUX_lseek 19 +#define __NR_HPUX_getpid 20 +#define __NR_HPUX_mount 21 +#define __NR_HPUX_umount 22 +#define __NR_HPUX_setuid 23 +#define __NR_HPUX_getuid 24 +#define __NR_HPUX_stime 25 +#define __NR_HPUX_ptrace 26 +#define __NR_HPUX_alarm 27 +#define __NR_HPUX_oldfstat 28 +#define __NR_HPUX_pause 29 +#define __NR_HPUX_utime 30 +#define __NR_HPUX_stty 31 +#define __NR_HPUX_gtty 32 +#define __NR_HPUX_access 33 +#define __NR_HPUX_nice 34 +#define __NR_HPUX_ftime 35 +#define __NR_HPUX_sync 36 +#define __NR_HPUX_kill 37 +#define __NR_HPUX_stat 38 +#define __NR_HPUX_setpgrp3 39 +#define __NR_HPUX_lstat 40 +#define __NR_HPUX_dup 41 +#define __NR_HPUX_pipe 42 +#define __NR_HPUX_times 43 +#define __NR_HPUX_profil 44 +#define __NR_HPUX_ki_call 45 +#define __NR_HPUX_setgid 46 +#define __NR_HPUX_getgid 47 +#define __NR_HPUX_sigsys 48 +#define __NR_HPUX_reserved1 49 +#define __NR_HPUX_reserved2 50 +#define __NR_HPUX_acct 51 +#define __NR_HPUX_set_userthreadid 52 +#define __NR_HPUX_oldlock 53 +#define __NR_HPUX_ioctl 54 +#define __NR_HPUX_reboot 55 +#define __NR_HPUX_symlink 56 +#define __NR_HPUX_utssys 57 +#define __NR_HPUX_readlink 58 +#define __NR_HPUX_execve 59 +#define __NR_HPUX_umask 60 +#define __NR_HPUX_chroot 61 +#define __NR_HPUX_fcntl 62 +#define __NR_HPUX_ulimit 63 +#define __NR_HPUX_getpagesize 64 +#define __NR_HPUX_mremap 65 +#define __NR_HPUX_vfork 66 +#define __NR_HPUX_vread 67 +#define __NR_HPUX_vwrite 68 +#define __NR_HPUX_sbrk 69 +#define __NR_HPUX_sstk 70 +#define __NR_HPUX_mmap 71 +#define __NR_HPUX_vadvise 72 +#define __NR_HPUX_munmap 73 +#define __NR_HPUX_mprotect 74 +#define __NR_HPUX_madvise 75 +#define __NR_HPUX_vhangup 76 +#define __NR_HPUX_swapoff 77 +#define __NR_HPUX_mincore 78 +#define __NR_HPUX_getgroups 79 +#define __NR_HPUX_setgroups 80 +#define __NR_HPUX_getpgrp2 81 +#define __NR_HPUX_setpgrp2 82 +#define __NR_HPUX_setitimer 83 +#define __NR_HPUX_wait3 84 +#define __NR_HPUX_swapon 85 +#define __NR_HPUX_getitimer 86 +#define __NR_HPUX_gethostname42 87 +#define __NR_HPUX_sethostname42 88 +#define __NR_HPUX_getdtablesize 89 +#define __NR_HPUX_dup2 90 +#define __NR_HPUX_getdopt 91 +#define __NR_HPUX_fstat 92 +#define __NR_HPUX_select 93 +#define __NR_HPUX_setdopt 94 +#define __NR_HPUX_fsync 95 +#define __NR_HPUX_setpriority 96 +#define __NR_HPUX_socket_old 97 +#define __NR_HPUX_connect_old 98 +#define __NR_HPUX_accept_old 99 +#define __NR_HPUX_getpriority 100 +#define __NR_HPUX_send_old 101 +#define __NR_HPUX_recv_old 102 +#define __NR_HPUX_socketaddr_old 103 +#define __NR_HPUX_bind_old 104 +#define __NR_HPUX_setsockopt_old 105 +#define __NR_HPUX_listen_old 106 +#define __NR_HPUX_vtimes_old 107 +#define __NR_HPUX_sigvector 108 +#define __NR_HPUX_sigblock 109 +#define __NR_HPUX_siggetmask 110 +#define __NR_HPUX_sigpause 111 +#define __NR_HPUX_sigstack 112 +#define __NR_HPUX_recvmsg_old 113 +#define __NR_HPUX_sendmsg_old 114 +#define __NR_HPUX_vtrace_old 115 +#define __NR_HPUX_gettimeofday 116 +#define __NR_HPUX_getrusage 117 +#define __NR_HPUX_getsockopt_old 118 +#define __NR_HPUX_resuba_old 119 +#define __NR_HPUX_readv 120 +#define __NR_HPUX_writev 121 +#define __NR_HPUX_settimeofday 122 +#define __NR_HPUX_fchown 123 +#define __NR_HPUX_fchmod 124 +#define __NR_HPUX_recvfrom_old 125 +#define __NR_HPUX_setresuid 126 +#define __NR_HPUX_setresgid 127 +#define __NR_HPUX_rename 128 +#define __NR_HPUX_truncate 129 +#define __NR_HPUX_ftruncate 130 +#define __NR_HPUX_flock_old 131 +#define __NR_HPUX_sysconf 132 +#define __NR_HPUX_sendto_old 133 +#define __NR_HPUX_shutdown_old 134 +#define __NR_HPUX_socketpair_old 135 +#define __NR_HPUX_mkdir 136 +#define __NR_HPUX_rmdir 137 +#define __NR_HPUX_utimes_old 138 +#define __NR_HPUX_sigcleanup_old 139 +#define __NR_HPUX_setcore 140 +#define __NR_HPUX_getpeername_old 141 +#define __NR_HPUX_gethostid 142 +#define __NR_HPUX_sethostid 143 +#define __NR_HPUX_getrlimit 144 +#define __NR_HPUX_setrlimit 145 +#define __NR_HPUX_killpg_old 146 +#define __NR_HPUX_cachectl 147 +#define __NR_HPUX_quotactl 148 +#define __NR_HPUX_get_sysinfo 149 +#define __NR_HPUX_getsockname_old 150 +#define __NR_HPUX_privgrp 151 +#define __NR_HPUX_rtprio 152 +#define __NR_HPUX_plock 153 +#define __NR_HPUX_reserved3 154 +#define __NR_HPUX_lockf 155 +#define __NR_HPUX_semget 156 +#define __NR_HPUX_osemctl 157 +#define __NR_HPUX_semop 158 +#define __NR_HPUX_msgget 159 +#define __NR_HPUX_omsgctl 160 +#define __NR_HPUX_msgsnd 161 +#define __NR_HPUX_msgrecv 162 +#define __NR_HPUX_shmget 163 +#define __NR_HPUX_oshmctl 164 +#define __NR_HPUX_shmat 165 +#define __NR_HPUX_shmdt 166 +#define __NR_HPUX_m68020_advise 167 +/* [168,189] are for Discless/DUX */ +#define __NR_HPUX_csp 168 +#define __NR_HPUX_cluster 169 +#define __NR_HPUX_mkrnod 170 +#define __NR_HPUX_test 171 +#define __NR_HPUX_unsp_open 172 +#define __NR_HPUX_reserved4 173 +#define __NR_HPUX_getcontext_old 174 +#define __NR_HPUX_osetcontext 175 +#define __NR_HPUX_bigio 176 +#define __NR_HPUX_pipenode 177 +#define __NR_HPUX_lsync 178 +#define __NR_HPUX_getmachineid 179 +#define __NR_HPUX_cnodeid 180 +#define __NR_HPUX_cnodes 181 +#define __NR_HPUX_swapclients 182 +#define __NR_HPUX_rmt_process 183 +#define __NR_HPUX_dskless_stats 184 +#define __NR_HPUX_sigprocmask 185 +#define __NR_HPUX_sigpending 186 +#define __NR_HPUX_sigsuspend 187 +#define __NR_HPUX_sigaction 188 +#define __NR_HPUX_reserved5 189 +#define __NR_HPUX_nfssvc 190 +#define __NR_HPUX_getfh 191 +#define __NR_HPUX_getdomainname 192 +#define __NR_HPUX_setdomainname 193 +#define __NR_HPUX_async_daemon 194 +#define __NR_HPUX_getdirentries 195 +#define __NR_HPUX_statfs 196 +#define __NR_HPUX_fstatfs 197 +#define __NR_HPUX_vfsmount 198 +#define __NR_HPUX_reserved6 199 +#define __NR_HPUX_waitpid 200 +/* 201 - 223 missing */ +#define __NR_HPUX_sigsetreturn 224 +#define __NR_HPUX_sigsetstatemask 225 +/* 226 missing */ +#define __NR_HPUX_cs 227 +#define __NR_HPUX_cds 228 +#define __NR_HPUX_set_no_trunc 229 +#define __NR_HPUX_pathconf 230 +#define __NR_HPUX_fpathconf 231 +/* 232, 233 missing */ +#define __NR_HPUX_nfs_fcntl 234 +#define __NR_HPUX_ogetacl 235 +#define __NR_HPUX_ofgetacl 236 +#define __NR_HPUX_osetacl 237 +#define __NR_HPUX_ofsetacl 238 +#define __NR_HPUX_pstat 239 +#define __NR_HPUX_getaudid 240 +#define __NR_HPUX_setaudid 241 +#define __NR_HPUX_getaudproc 242 +#define __NR_HPUX_setaudproc 243 +#define __NR_HPUX_getevent 244 +#define __NR_HPUX_setevent 245 +#define __NR_HPUX_audwrite 246 +#define __NR_HPUX_audswitch 247 +#define __NR_HPUX_audctl 248 +#define __NR_HPUX_ogetaccess 249 +#define __NR_HPUX_fsctl 250 +/* 251 - 258 missing */ +#define __NR_HPUX_swapfs 259 +#define __NR_HPUX_fss 260 +/* 261 - 266 missing */ +#define __NR_HPUX_tsync 267 +#define __NR_HPUX_getnumfds 268 +#define __NR_HPUX_poll 269 +#define __NR_HPUX_getmsg 270 +#define __NR_HPUX_putmsg 271 +#define __NR_HPUX_fchdir 272 +#define __NR_HPUX_getmount_cnt 273 +#define __NR_HPUX_getmount_entry 274 +#define __NR_HPUX_accept 275 +#define __NR_HPUX_bind 276 +#define __NR_HPUX_connect 277 +#define __NR_HPUX_getpeername 278 +#define __NR_HPUX_getsockname 279 +#define __NR_HPUX_getsockopt 280 +#define __NR_HPUX_listen 281 +#define __NR_HPUX_recv 282 +#define __NR_HPUX_recvfrom 283 +#define __NR_HPUX_recvmsg 284 +#define __NR_HPUX_send 285 +#define __NR_HPUX_sendmsg 286 +#define __NR_HPUX_sendto 287 +#define __NR_HPUX_setsockopt 288 +#define __NR_HPUX_shutdown 289 +#define __NR_HPUX_socket 290 +#define __NR_HPUX_socketpair 291 +#define __NR_HPUX_proc_open 292 +#define __NR_HPUX_proc_close 293 +#define __NR_HPUX_proc_send 294 +#define __NR_HPUX_proc_recv 295 +#define __NR_HPUX_proc_sendrecv 296 +#define __NR_HPUX_proc_syscall 297 +/* 298 - 311 missing */ +#define __NR_HPUX_semctl 312 +#define __NR_HPUX_msgctl 313 +#define __NR_HPUX_shmctl 314 +#define __NR_HPUX_mpctl 315 +#define __NR_HPUX_exportfs 316 +#define __NR_HPUX_getpmsg 317 +#define __NR_HPUX_putpmsg 318 +/* 319 missing */ +#define __NR_HPUX_msync 320 +#define __NR_HPUX_msleep 321 +#define __NR_HPUX_mwakeup 322 +#define __NR_HPUX_msem_init 323 +#define __NR_HPUX_msem_remove 324 +#define __NR_HPUX_adjtime 325 +#define __NR_HPUX_kload 326 +#define __NR_HPUX_fattach 327 +#define __NR_HPUX_fdetach 328 +#define __NR_HPUX_serialize 329 +#define __NR_HPUX_statvfs 330 +#define __NR_HPUX_fstatvfs 331 +#define __NR_HPUX_lchown 332 +#define __NR_HPUX_getsid 333 +#define __NR_HPUX_sysfs 334 +/* 335, 336 missing */ +#define __NR_HPUX_sched_setparam 337 +#define __NR_HPUX_sched_getparam 338 +#define __NR_HPUX_sched_setscheduler 339 +#define __NR_HPUX_sched_getscheduler 340 +#define __NR_HPUX_sched_yield 341 +#define __NR_HPUX_sched_get_priority_max 342 +#define __NR_HPUX_sched_get_priority_min 343 +#define __NR_HPUX_sched_rr_get_interval 344 +#define __NR_HPUX_clock_settime 345 +#define __NR_HPUX_clock_gettime 346 +#define __NR_HPUX_clock_getres 347 +#define __NR_HPUX_timer_create 348 +#define __NR_HPUX_timer_delete 349 +#define __NR_HPUX_timer_settime 350 +#define __NR_HPUX_timer_gettime 351 +#define __NR_HPUX_timer_getoverrun 352 +#define __NR_HPUX_nanosleep 353 +#define __NR_HPUX_toolbox 354 +/* 355 missing */ +#define __NR_HPUX_getdents 356 +#define __NR_HPUX_getcontext 357 +#define __NR_HPUX_sysinfo 358 +#define __NR_HPUX_fcntl64 359 +#define __NR_HPUX_ftruncate64 360 +#define __NR_HPUX_fstat64 361 +#define __NR_HPUX_getdirentries64 362 +#define __NR_HPUX_getrlimit64 363 +#define __NR_HPUX_lockf64 364 +#define __NR_HPUX_lseek64 365 +#define __NR_HPUX_lstat64 366 +#define __NR_HPUX_mmap64 367 +#define __NR_HPUX_setrlimit64 368 +#define __NR_HPUX_stat64 369 +#define __NR_HPUX_truncate64 370 +#define __NR_HPUX_ulimit64 371 +#define __NR_HPUX_pread 372 +#define __NR_HPUX_preadv 373 +#define __NR_HPUX_pwrite 374 +#define __NR_HPUX_pwritev 375 +#define __NR_HPUX_pread64 376 +#define __NR_HPUX_preadv64 377 +#define __NR_HPUX_pwrite64 378 +#define __NR_HPUX_pwritev64 379 +#define __NR_HPUX_setcontext 380 +#define __NR_HPUX_sigaltstack 381 +#define __NR_HPUX_waitid 382 +#define __NR_HPUX_setpgrp 383 +#define __NR_HPUX_recvmsg2 384 +#define __NR_HPUX_sendmsg2 385 +#define __NR_HPUX_socket2 386 +#define __NR_HPUX_socketpair2 387 +#define __NR_HPUX_setregid 388 +#define __NR_HPUX_lwp_create 389 +#define __NR_HPUX_lwp_terminate 390 +#define __NR_HPUX_lwp_wait 391 +#define __NR_HPUX_lwp_suspend 392 +#define __NR_HPUX_lwp_resume 393 +/* 394 missing */ +#define __NR_HPUX_lwp_abort_syscall 395 +#define __NR_HPUX_lwp_info 396 +#define __NR_HPUX_lwp_kill 397 +#define __NR_HPUX_ksleep 398 +#define __NR_HPUX_kwakeup 399 +/* 400 missing */ +#define __NR_HPUX_pstat_getlwp 401 +#define __NR_HPUX_lwp_exit 402 +#define __NR_HPUX_lwp_continue 403 +#define __NR_HPUX_getacl 404 +#define __NR_HPUX_fgetacl 405 +#define __NR_HPUX_setacl 406 +#define __NR_HPUX_fsetacl 407 +#define __NR_HPUX_getaccess 408 +#define __NR_HPUX_lwp_mutex_init 409 +#define __NR_HPUX_lwp_mutex_lock_sys 410 +#define __NR_HPUX_lwp_mutex_unlock 411 +#define __NR_HPUX_lwp_cond_init 412 +#define __NR_HPUX_lwp_cond_signal 413 +#define __NR_HPUX_lwp_cond_broadcast 414 +#define __NR_HPUX_lwp_cond_wait_sys 415 +#define __NR_HPUX_lwp_getscheduler 416 +#define __NR_HPUX_lwp_setscheduler 417 +#define __NR_HPUX_lwp_getstate 418 +#define __NR_HPUX_lwp_setstate 419 +#define __NR_HPUX_lwp_detach 420 +#define __NR_HPUX_mlock 421 +#define __NR_HPUX_munlock 422 +#define __NR_HPUX_mlockall 423 +#define __NR_HPUX_munlockall 424 +#define __NR_HPUX_shm_open 425 +#define __NR_HPUX_shm_unlink 426 +#define __NR_HPUX_sigqueue 427 +#define __NR_HPUX_sigwaitinfo 428 +#define __NR_HPUX_sigtimedwait 429 +#define __NR_HPUX_sigwait 430 +#define __NR_HPUX_aio_read 431 +#define __NR_HPUX_aio_write 432 +#define __NR_HPUX_lio_listio 433 +#define __NR_HPUX_aio_error 434 +#define __NR_HPUX_aio_return 435 +#define __NR_HPUX_aio_cancel 436 +#define __NR_HPUX_aio_suspend 437 +#define __NR_HPUX_aio_fsync 438 +#define __NR_HPUX_mq_open 439 +#define __NR_HPUX_mq_close 440 +#define __NR_HPUX_mq_unlink 441 +#define __NR_HPUX_mq_send 442 +#define __NR_HPUX_mq_receive 443 +#define __NR_HPUX_mq_notify 444 +#define __NR_HPUX_mq_setattr 445 +#define __NR_HPUX_mq_getattr 446 +#define __NR_HPUX_ksem_open 447 +#define __NR_HPUX_ksem_unlink 448 +#define __NR_HPUX_ksem_close 449 +#define __NR_HPUX_ksem_post 450 +#define __NR_HPUX_ksem_wait 451 +#define __NR_HPUX_ksem_read 452 +#define __NR_HPUX_ksem_trywait 453 +#define __NR_HPUX_lwp_rwlock_init 454 +#define __NR_HPUX_lwp_rwlock_destroy 455 +#define __NR_HPUX_lwp_rwlock_rdlock_sys 456 +#define __NR_HPUX_lwp_rwlock_wrlock_sys 457 +#define __NR_HPUX_lwp_rwlock_tryrdlock 458 +#define __NR_HPUX_lwp_rwlock_trywrlock 459 +#define __NR_HPUX_lwp_rwlock_unlock 460 +#define __NR_HPUX_ttrace 461 +#define __NR_HPUX_ttrace_wait 462 +#define __NR_HPUX_lf_wire_mem 463 +#define __NR_HPUX_lf_unwire_mem 464 +#define __NR_HPUX_lf_send_pin_map 465 +#define __NR_HPUX_lf_free_buf 466 +#define __NR_HPUX_lf_wait_nq 467 +#define __NR_HPUX_lf_wakeup_conn_q 468 +#define __NR_HPUX_lf_unused 469 +#define __NR_HPUX_lwp_sema_init 470 +#define __NR_HPUX_lwp_sema_post 471 +#define __NR_HPUX_lwp_sema_wait 472 +#define __NR_HPUX_lwp_sema_trywait 473 +#define __NR_HPUX_lwp_sema_destroy 474 +#define __NR_HPUX_statvfs64 475 +#define __NR_HPUX_fstatvfs64 476 +#define __NR_HPUX_msh_register 477 +#define __NR_HPUX_ptrace64 478 +#define __NR_HPUX_sendfile 479 +#define __NR_HPUX_sendpath 480 +#define __NR_HPUX_sendfile64 481 +#define __NR_HPUX_sendpath64 482 +#define __NR_HPUX_modload 483 +#define __NR_HPUX_moduload 484 +#define __NR_HPUX_modpath 485 +#define __NR_HPUX_getksym 486 +#define __NR_HPUX_modadm 487 +#define __NR_HPUX_modstat 488 +#define __NR_HPUX_lwp_detached_exit 489 +#define __NR_HPUX_crashconf 490 +#define __NR_HPUX_siginhibit 491 +#define __NR_HPUX_sigenable 492 +#define __NR_HPUX_spuctl 493 +#define __NR_HPUX_zerokernelsum 494 +#define __NR_HPUX_nfs_kstat 495 +#define __NR_HPUX_aio_read64 496 +#define __NR_HPUX_aio_write64 497 +#define __NR_HPUX_aio_error64 498 +#define __NR_HPUX_aio_return64 499 +#define __NR_HPUX_aio_cancel64 500 +#define __NR_HPUX_aio_suspend64 501 +#define __NR_HPUX_aio_fsync64 502 +#define __NR_HPUX_lio_listio64 503 +#define __NR_HPUX_recv2 504 +#define __NR_HPUX_recvfrom2 505 +#define __NR_HPUX_send2 506 +#define __NR_HPUX_sendto2 507 +#define __NR_HPUX_acl 508 +#define __NR_HPUX___cnx_p2p_ctl 509 +#define __NR_HPUX___cnx_gsched_ctl 510 +#define __NR_HPUX___cnx_pmon_ctl 511 + +#define __NR_HPUX_syscalls 512 + +/* + * Linux system call numbers. + * + * Cary Coutant says that we should just use another syscall gateway + * page to avoid clashing with the HPUX space, and I think he's right: + * it will would keep a branch out of our syscall entry path, at the + * very least. If we decide to change it later, we can ``just'' tweak + * the LINUX_GATEWAY_ADDR define at the bottom and make __NR_Linux be + * 1024 or something. Oh, and recompile libc. =) + * + * 64-bit HPUX binaries get the syscall gateway address passed in a register + * from the kernel at startup, which seems a sane strategy. + */ + +#define __NR_Linux 0 +#define __NR_restart_syscall (__NR_Linux + 0) +#define __NR_exit (__NR_Linux + 1) +#define __NR_fork (__NR_Linux + 2) +#define __NR_read (__NR_Linux + 3) +#define __NR_write (__NR_Linux + 4) +#define __NR_open (__NR_Linux + 5) +#define __NR_close (__NR_Linux + 6) +#define __NR_waitpid (__NR_Linux + 7) +#define __NR_creat (__NR_Linux + 8) +#define __NR_link (__NR_Linux + 9) +#define __NR_unlink (__NR_Linux + 10) +#define __NR_execve (__NR_Linux + 11) +#define __NR_chdir (__NR_Linux + 12) +#define __NR_time (__NR_Linux + 13) +#define __NR_mknod (__NR_Linux + 14) +#define __NR_chmod (__NR_Linux + 15) +#define __NR_lchown (__NR_Linux + 16) +#define __NR_socket (__NR_Linux + 17) +#define __NR_stat (__NR_Linux + 18) +#define __NR_lseek (__NR_Linux + 19) +#define __NR_getpid (__NR_Linux + 20) +#define __NR_mount (__NR_Linux + 21) +#define __NR_bind (__NR_Linux + 22) +#define __NR_setuid (__NR_Linux + 23) +#define __NR_getuid (__NR_Linux + 24) +#define __NR_stime (__NR_Linux + 25) +#define __NR_ptrace (__NR_Linux + 26) +#define __NR_alarm (__NR_Linux + 27) +#define __NR_fstat (__NR_Linux + 28) +#define __NR_pause (__NR_Linux + 29) +#define __NR_utime (__NR_Linux + 30) +#define __NR_connect (__NR_Linux + 31) +#define __NR_listen (__NR_Linux + 32) +#define __NR_access (__NR_Linux + 33) +#define __NR_nice (__NR_Linux + 34) +#define __NR_accept (__NR_Linux + 35) +#define __NR_sync (__NR_Linux + 36) +#define __NR_kill (__NR_Linux + 37) +#define __NR_rename (__NR_Linux + 38) +#define __NR_mkdir (__NR_Linux + 39) +#define __NR_rmdir (__NR_Linux + 40) +#define __NR_dup (__NR_Linux + 41) +#define __NR_pipe (__NR_Linux + 42) +#define __NR_times (__NR_Linux + 43) +#define __NR_getsockname (__NR_Linux + 44) +#define __NR_brk (__NR_Linux + 45) +#define __NR_setgid (__NR_Linux + 46) +#define __NR_getgid (__NR_Linux + 47) +#define __NR_signal (__NR_Linux + 48) +#define __NR_geteuid (__NR_Linux + 49) +#define __NR_getegid (__NR_Linux + 50) +#define __NR_acct (__NR_Linux + 51) +#define __NR_umount2 (__NR_Linux + 52) +#define __NR_getpeername (__NR_Linux + 53) +#define __NR_ioctl (__NR_Linux + 54) +#define __NR_fcntl (__NR_Linux + 55) +#define __NR_socketpair (__NR_Linux + 56) +#define __NR_setpgid (__NR_Linux + 57) +#define __NR_send (__NR_Linux + 58) +#define __NR_uname (__NR_Linux + 59) +#define __NR_umask (__NR_Linux + 60) +#define __NR_chroot (__NR_Linux + 61) +#define __NR_ustat (__NR_Linux + 62) +#define __NR_dup2 (__NR_Linux + 63) +#define __NR_getppid (__NR_Linux + 64) +#define __NR_getpgrp (__NR_Linux + 65) +#define __NR_setsid (__NR_Linux + 66) +#define __NR_pivot_root (__NR_Linux + 67) +#define __NR_sgetmask (__NR_Linux + 68) +#define __NR_ssetmask (__NR_Linux + 69) +#define __NR_setreuid (__NR_Linux + 70) +#define __NR_setregid (__NR_Linux + 71) +#define __NR_mincore (__NR_Linux + 72) +#define __NR_sigpending (__NR_Linux + 73) +#define __NR_sethostname (__NR_Linux + 74) +#define __NR_setrlimit (__NR_Linux + 75) +#define __NR_getrlimit (__NR_Linux + 76) +#define __NR_getrusage (__NR_Linux + 77) +#define __NR_gettimeofday (__NR_Linux + 78) +#define __NR_settimeofday (__NR_Linux + 79) +#define __NR_getgroups (__NR_Linux + 80) +#define __NR_setgroups (__NR_Linux + 81) +#define __NR_sendto (__NR_Linux + 82) +#define __NR_symlink (__NR_Linux + 83) +#define __NR_lstat (__NR_Linux + 84) +#define __NR_readlink (__NR_Linux + 85) +#define __NR_uselib (__NR_Linux + 86) +#define __NR_swapon (__NR_Linux + 87) +#define __NR_reboot (__NR_Linux + 88) +#define __NR_mmap2 (__NR_Linux + 89) +#define __NR_mmap (__NR_Linux + 90) +#define __NR_munmap (__NR_Linux + 91) +#define __NR_truncate (__NR_Linux + 92) +#define __NR_ftruncate (__NR_Linux + 93) +#define __NR_fchmod (__NR_Linux + 94) +#define __NR_fchown (__NR_Linux + 95) +#define __NR_getpriority (__NR_Linux + 96) +#define __NR_setpriority (__NR_Linux + 97) +#define __NR_recv (__NR_Linux + 98) +#define __NR_statfs (__NR_Linux + 99) +#define __NR_fstatfs (__NR_Linux + 100) +#define __NR_stat64 (__NR_Linux + 101) +/* #define __NR_socketcall (__NR_Linux + 102) */ +#define __NR_syslog (__NR_Linux + 103) +#define __NR_setitimer (__NR_Linux + 104) +#define __NR_getitimer (__NR_Linux + 105) +#define __NR_capget (__NR_Linux + 106) +#define __NR_capset (__NR_Linux + 107) +#define __NR_pread64 (__NR_Linux + 108) +#define __NR_pwrite64 (__NR_Linux + 109) +#define __NR_getcwd (__NR_Linux + 110) +#define __NR_vhangup (__NR_Linux + 111) +#define __NR_fstat64 (__NR_Linux + 112) +#define __NR_vfork (__NR_Linux + 113) +#define __NR_wait4 (__NR_Linux + 114) +#define __NR_swapoff (__NR_Linux + 115) +#define __NR_sysinfo (__NR_Linux + 116) +#define __NR_shutdown (__NR_Linux + 117) +#define __NR_fsync (__NR_Linux + 118) +#define __NR_madvise (__NR_Linux + 119) +#define __NR_clone (__NR_Linux + 120) +#define __NR_setdomainname (__NR_Linux + 121) +#define __NR_sendfile (__NR_Linux + 122) +#define __NR_recvfrom (__NR_Linux + 123) +#define __NR_adjtimex (__NR_Linux + 124) +#define __NR_mprotect (__NR_Linux + 125) +#define __NR_sigprocmask (__NR_Linux + 126) +#define __NR_create_module (__NR_Linux + 127) +#define __NR_init_module (__NR_Linux + 128) +#define __NR_delete_module (__NR_Linux + 129) +#define __NR_get_kernel_syms (__NR_Linux + 130) +#define __NR_quotactl (__NR_Linux + 131) +#define __NR_getpgid (__NR_Linux + 132) +#define __NR_fchdir (__NR_Linux + 133) +#define __NR_bdflush (__NR_Linux + 134) +#define __NR_sysfs (__NR_Linux + 135) +#define __NR_personality (__NR_Linux + 136) +#define __NR_afs_syscall (__NR_Linux + 137) /* Syscall for Andrew File System */ +#define __NR_setfsuid (__NR_Linux + 138) +#define __NR_setfsgid (__NR_Linux + 139) +#define __NR__llseek (__NR_Linux + 140) +#define __NR_getdents (__NR_Linux + 141) +#define __NR__newselect (__NR_Linux + 142) +#define __NR_flock (__NR_Linux + 143) +#define __NR_msync (__NR_Linux + 144) +#define __NR_readv (__NR_Linux + 145) +#define __NR_writev (__NR_Linux + 146) +#define __NR_getsid (__NR_Linux + 147) +#define __NR_fdatasync (__NR_Linux + 148) +#define __NR__sysctl (__NR_Linux + 149) +#define __NR_mlock (__NR_Linux + 150) +#define __NR_munlock (__NR_Linux + 151) +#define __NR_mlockall (__NR_Linux + 152) +#define __NR_munlockall (__NR_Linux + 153) +#define __NR_sched_setparam (__NR_Linux + 154) +#define __NR_sched_getparam (__NR_Linux + 155) +#define __NR_sched_setscheduler (__NR_Linux + 156) +#define __NR_sched_getscheduler (__NR_Linux + 157) +#define __NR_sched_yield (__NR_Linux + 158) +#define __NR_sched_get_priority_max (__NR_Linux + 159) +#define __NR_sched_get_priority_min (__NR_Linux + 160) +#define __NR_sched_rr_get_interval (__NR_Linux + 161) +#define __NR_nanosleep (__NR_Linux + 162) +#define __NR_mremap (__NR_Linux + 163) +#define __NR_setresuid (__NR_Linux + 164) +#define __NR_getresuid (__NR_Linux + 165) +#define __NR_sigaltstack (__NR_Linux + 166) +#define __NR_query_module (__NR_Linux + 167) +#define __NR_poll (__NR_Linux + 168) +#define __NR_nfsservctl (__NR_Linux + 169) +#define __NR_setresgid (__NR_Linux + 170) +#define __NR_getresgid (__NR_Linux + 171) +#define __NR_prctl (__NR_Linux + 172) +#define __NR_rt_sigreturn (__NR_Linux + 173) +#define __NR_rt_sigaction (__NR_Linux + 174) +#define __NR_rt_sigprocmask (__NR_Linux + 175) +#define __NR_rt_sigpending (__NR_Linux + 176) +#define __NR_rt_sigtimedwait (__NR_Linux + 177) +#define __NR_rt_sigqueueinfo (__NR_Linux + 178) +#define __NR_rt_sigsuspend (__NR_Linux + 179) +#define __NR_chown (__NR_Linux + 180) +#define __NR_setsockopt (__NR_Linux + 181) +#define __NR_getsockopt (__NR_Linux + 182) +#define __NR_sendmsg (__NR_Linux + 183) +#define __NR_recvmsg (__NR_Linux + 184) +#define __NR_semop (__NR_Linux + 185) +#define __NR_semget (__NR_Linux + 186) +#define __NR_semctl (__NR_Linux + 187) +#define __NR_msgsnd (__NR_Linux + 188) +#define __NR_msgrcv (__NR_Linux + 189) +#define __NR_msgget (__NR_Linux + 190) +#define __NR_msgctl (__NR_Linux + 191) +#define __NR_shmat (__NR_Linux + 192) +#define __NR_shmdt (__NR_Linux + 193) +#define __NR_shmget (__NR_Linux + 194) +#define __NR_shmctl (__NR_Linux + 195) + +#define __NR_getpmsg (__NR_Linux + 196) /* Somebody *wants* streams? */ +#define __NR_putpmsg (__NR_Linux + 197) + +#define __NR_lstat64 (__NR_Linux + 198) +#define __NR_truncate64 (__NR_Linux + 199) +#define __NR_ftruncate64 (__NR_Linux + 200) +#define __NR_getdents64 (__NR_Linux + 201) +#define __NR_fcntl64 (__NR_Linux + 202) +#define __NR_attrctl (__NR_Linux + 203) +#define __NR_acl_get (__NR_Linux + 204) +#define __NR_acl_set (__NR_Linux + 205) +#define __NR_gettid (__NR_Linux + 206) +#define __NR_readahead (__NR_Linux + 207) +#define __NR_tkill (__NR_Linux + 208) +#define __NR_sendfile64 (__NR_Linux + 209) +#define __NR_futex (__NR_Linux + 210) +#define __NR_sched_setaffinity (__NR_Linux + 211) +#define __NR_sched_getaffinity (__NR_Linux + 212) +#define __NR_set_thread_area (__NR_Linux + 213) +#define __NR_get_thread_area (__NR_Linux + 214) +#define __NR_io_setup (__NR_Linux + 215) +#define __NR_io_destroy (__NR_Linux + 216) +#define __NR_io_getevents (__NR_Linux + 217) +#define __NR_io_submit (__NR_Linux + 218) +#define __NR_io_cancel (__NR_Linux + 219) +#define __NR_alloc_hugepages (__NR_Linux + 220) +#define __NR_free_hugepages (__NR_Linux + 221) +#define __NR_exit_group (__NR_Linux + 222) +#define __NR_lookup_dcookie (__NR_Linux + 223) +#define __NR_epoll_create (__NR_Linux + 224) +#define __NR_epoll_ctl (__NR_Linux + 225) +#define __NR_epoll_wait (__NR_Linux + 226) +#define __NR_remap_file_pages (__NR_Linux + 227) +#define __NR_semtimedop (__NR_Linux + 228) +#define __NR_mq_open (__NR_Linux + 229) +#define __NR_mq_unlink (__NR_Linux + 230) +#define __NR_mq_timedsend (__NR_Linux + 231) +#define __NR_mq_timedreceive (__NR_Linux + 232) +#define __NR_mq_notify (__NR_Linux + 233) +#define __NR_mq_getsetattr (__NR_Linux + 234) +#define __NR_waitid (__NR_Linux + 235) +#define __NR_fadvise64_64 (__NR_Linux + 236) +#define __NR_set_tid_address (__NR_Linux + 237) +#define __NR_setxattr (__NR_Linux + 238) +#define __NR_lsetxattr (__NR_Linux + 239) +#define __NR_fsetxattr (__NR_Linux + 240) +#define __NR_getxattr (__NR_Linux + 241) +#define __NR_lgetxattr (__NR_Linux + 242) +#define __NR_fgetxattr (__NR_Linux + 243) +#define __NR_listxattr (__NR_Linux + 244) +#define __NR_llistxattr (__NR_Linux + 245) +#define __NR_flistxattr (__NR_Linux + 246) +#define __NR_removexattr (__NR_Linux + 247) +#define __NR_lremovexattr (__NR_Linux + 248) +#define __NR_fremovexattr (__NR_Linux + 249) +#define __NR_timer_create (__NR_Linux + 250) +#define __NR_timer_settime (__NR_Linux + 251) +#define __NR_timer_gettime (__NR_Linux + 252) +#define __NR_timer_getoverrun (__NR_Linux + 253) +#define __NR_timer_delete (__NR_Linux + 254) +#define __NR_clock_settime (__NR_Linux + 255) +#define __NR_clock_gettime (__NR_Linux + 256) +#define __NR_clock_getres (__NR_Linux + 257) +#define __NR_clock_nanosleep (__NR_Linux + 258) +#define __NR_tgkill (__NR_Linux + 259) +#define __NR_mbind (__NR_Linux + 260) +#define __NR_get_mempolicy (__NR_Linux + 261) +#define __NR_set_mempolicy (__NR_Linux + 262) +#define __NR_vserver (__NR_Linux + 263) +#define __NR_add_key (__NR_Linux + 264) +#define __NR_request_key (__NR_Linux + 265) +#define __NR_keyctl (__NR_Linux + 266) +#define __NR_ioprio_set (__NR_Linux + 267) +#define __NR_ioprio_get (__NR_Linux + 268) +#define __NR_inotify_init (__NR_Linux + 269) +#define __NR_inotify_add_watch (__NR_Linux + 270) +#define __NR_inotify_rm_watch (__NR_Linux + 271) +#define __NR_migrate_pages (__NR_Linux + 272) +#define __NR_pselect6 (__NR_Linux + 273) +#define __NR_ppoll (__NR_Linux + 274) +#define __NR_openat (__NR_Linux + 275) +#define __NR_mkdirat (__NR_Linux + 276) +#define __NR_mknodat (__NR_Linux + 277) +#define __NR_fchownat (__NR_Linux + 278) +#define __NR_futimesat (__NR_Linux + 279) +#define __NR_fstatat64 (__NR_Linux + 280) +#define __NR_unlinkat (__NR_Linux + 281) +#define __NR_renameat (__NR_Linux + 282) +#define __NR_linkat (__NR_Linux + 283) +#define __NR_symlinkat (__NR_Linux + 284) +#define __NR_readlinkat (__NR_Linux + 285) +#define __NR_fchmodat (__NR_Linux + 286) +#define __NR_faccessat (__NR_Linux + 287) +#define __NR_unshare (__NR_Linux + 288) +#define __NR_set_robust_list (__NR_Linux + 289) +#define __NR_get_robust_list (__NR_Linux + 290) +#define __NR_splice (__NR_Linux + 291) +#define __NR_sync_file_range (__NR_Linux + 292) +#define __NR_tee (__NR_Linux + 293) +#define __NR_vmsplice (__NR_Linux + 294) +#define __NR_move_pages (__NR_Linux + 295) +#define __NR_getcpu (__NR_Linux + 296) +#define __NR_epoll_pwait (__NR_Linux + 297) +#define __NR_statfs64 (__NR_Linux + 298) +#define __NR_fstatfs64 (__NR_Linux + 299) +#define __NR_kexec_load (__NR_Linux + 300) +#define __NR_utimensat (__NR_Linux + 301) +#define __NR_signalfd (__NR_Linux + 302) +#define __NR_timerfd (__NR_Linux + 303) +#define __NR_eventfd (__NR_Linux + 304) +#define __NR_fallocate (__NR_Linux + 305) +#define __NR_timerfd_create (__NR_Linux + 306) +#define __NR_timerfd_settime (__NR_Linux + 307) +#define __NR_timerfd_gettime (__NR_Linux + 308) +#define __NR_signalfd4 (__NR_Linux + 309) +#define __NR_eventfd2 (__NR_Linux + 310) +#define __NR_epoll_create1 (__NR_Linux + 311) +#define __NR_dup3 (__NR_Linux + 312) +#define __NR_pipe2 (__NR_Linux + 313) +#define __NR_inotify_init1 (__NR_Linux + 314) +#define __NR_preadv (__NR_Linux + 315) +#define __NR_pwritev (__NR_Linux + 316) +#define __NR_rt_tgsigqueueinfo (__NR_Linux + 317) +#define __NR_perf_event_open (__NR_Linux + 318) +#define __NR_recvmmsg (__NR_Linux + 319) +#define __NR_accept4 (__NR_Linux + 320) +#define __NR_prlimit64 (__NR_Linux + 321) +#define __NR_fanotify_init (__NR_Linux + 322) +#define __NR_fanotify_mark (__NR_Linux + 323) +#define __NR_clock_adjtime (__NR_Linux + 324) +#define __NR_name_to_handle_at (__NR_Linux + 325) +#define __NR_open_by_handle_at (__NR_Linux + 326) +#define __NR_syncfs (__NR_Linux + 327) +#define __NR_setns (__NR_Linux + 328) +#define __NR_sendmmsg (__NR_Linux + 329) + +#define __NR_Linux_syscalls (__NR_sendmmsg + 1) + + +#define __IGNORE_select /* newselect */ +#define __IGNORE_fadvise64 /* fadvise64_64 */ +#define __IGNORE_utimes /* utime */ + + +#define HPUX_GATEWAY_ADDR 0xC0000004 +#define LINUX_GATEWAY_ADDR 0x100 + +#endif /* _UAPI_ASM_PARISC_UNISTD_H_ */ -- cgit v1.2.3-70-g09d2 From 344afa6550a66eb4b7103cf1b65fca6f38d380d8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 17 Oct 2012 01:01:12 +0200 Subject: MIPS: Hugetlbfs: Handle huge pages correctly in pmd_bad() Signed-off-by: Ralf Baechle --- arch/mips/include/asm/pgtable-64.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index c26e1825007..f5b521d5a67 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -9,6 +9,7 @@ #ifndef _ASM_PGTABLE_64_H #define _ASM_PGTABLE_64_H +#include #include #include @@ -172,7 +173,19 @@ static inline int pmd_none(pmd_t pmd) return pmd_val(pmd) == (unsigned long) invalid_pte_table; } -#define pmd_bad(pmd) (pmd_val(pmd) & ~PAGE_MASK) +static inline int pmd_bad(pmd_t pmd) +{ +#ifdef CONFIG_HUGETLB_PAGE + /* pmd_huge(pmd) but inline */ + if (unlikely(pmd_val(pmd) & _PAGE_HUGE)) + return 0; +#endif + + if (unlikely(pmd_val(pmd) & ~PAGE_MASK)) + return 1; + + return 0; +} static inline int pmd_present(pmd_t pmd) { -- cgit v1.2.3-70-g09d2 From 01422ff49135e0b747132686405ea8a58f760997 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 17 Oct 2012 01:01:20 +0200 Subject: MIPS: Restore pagemask after dumping the TLB. Or bad things might happen if the last TLB entry isn't a basic size page. Signed-off-by: Ralf Baechle --- arch/mips/lib/dump_tlb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c index 3f69725556a..a99c1d3fc56 100644 --- a/arch/mips/lib/dump_tlb.c +++ b/arch/mips/lib/dump_tlb.c @@ -50,8 +50,9 @@ static void dump_tlb(int first, int last) { unsigned long s_entryhi, entryhi, asid; unsigned long long entrylo0, entrylo1; - unsigned int s_index, pagemask, c0, c1, i; + unsigned int s_index, s_pagemask, pagemask, c0, c1, i; + s_pagemask = read_c0_pagemask(); s_entryhi = read_c0_entryhi(); s_index = read_c0_index(); asid = s_entryhi & 0xff; @@ -103,6 +104,7 @@ static void dump_tlb(int first, int last) write_c0_entryhi(s_entryhi); write_c0_index(s_index); + write_c0_pagemask(s_pagemask); } void dump_tlb_all(void) -- cgit v1.2.3-70-g09d2 From fb944c9ba3f4838a64929a1926822e987b4e44c0 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 17 Oct 2012 01:01:21 +0200 Subject: MIPS: hugetlbfs: Fix hazard between tlb write and pagemask restoration. On some CPU the write to pagemask might complete before the TLB write instruction reads from the pagemask register. Signed-off-by: Ralf Baechle --- arch/mips/mm/tlb-r4k.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 87b9cfcc30f..4b9b935a070 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -320,6 +320,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) tlb_write_random(); else tlb_write_indexed(); + tlbw_use_hazard(); write_c0_pagemask(PM_DEFAULT_MASK); } else #endif -- cgit v1.2.3-70-g09d2 From 32f8516a8c733d281faa9f6666b509035246505c Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Tue, 16 Oct 2012 17:31:23 -0700 Subject: mm, mempolicy: fix printing stack contents in numa_maps When reading /proc/pid/numa_maps, it's possible to return the contents of the stack where the mempolicy string should be printed if the policy gets freed from beneath us. This happens because mpol_to_str() may return an error the stack-allocated buffer is then printed without ever being stored. There are two possible error conditions in mpol_to_str(): - if the buffer allocated is insufficient for the string to be stored, and - if the mempolicy has an invalid mode. The first error condition is not triggered in any of the callers to mpol_to_str(): at least 50 bytes is always allocated on the stack and this is sufficient for the string to be written. A future patch should convert this into BUILD_BUG_ON() since we know the maximum strlen possible, but that's not -rc material. The second error condition is possible if a race occurs in dropping a reference to a task's mempolicy causing it to be freed during the read(). The slab poison value is then used for the mode and mpol_to_str() returns -EINVAL. This race is only possible because get_vma_policy() believes that mm->mmap_sem protects task->mempolicy, which isn't true. The exit path does not hold mm->mmap_sem when dropping the reference or setting task->mempolicy to NULL: it uses task_lock(task) instead. Thus, it's required for the caller of a task mempolicy to hold task_lock(task) while grabbing the mempolicy and reading it. Callers with a vma policy store their mempolicy earlier and can simply increment the reference count so it's guaranteed not to be freed. Reported-by: Dave Jones Signed-off-by: David Rientjes Signed-off-by: Linus Torvalds --- fs/proc/task_mmu.c | 7 +++++-- mm/mempolicy.c | 5 ++--- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 79827ce03e3..14df8806ff2 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -1158,6 +1158,7 @@ static int show_numa_map(struct seq_file *m, void *v, int is_pid) struct vm_area_struct *vma = v; struct numa_maps *md = &numa_priv->md; struct file *file = vma->vm_file; + struct task_struct *task = proc_priv->task; struct mm_struct *mm = vma->vm_mm; struct mm_walk walk = {}; struct mempolicy *pol; @@ -1177,9 +1178,11 @@ static int show_numa_map(struct seq_file *m, void *v, int is_pid) walk.private = md; walk.mm = mm; - pol = get_vma_policy(proc_priv->task, vma, vma->vm_start); + task_lock(task); + pol = get_vma_policy(task, vma, vma->vm_start); mpol_to_str(buffer, sizeof(buffer), pol, 0); mpol_cond_put(pol); + task_unlock(task); seq_printf(m, "%08lx %s", vma->vm_start, buffer); @@ -1189,7 +1192,7 @@ static int show_numa_map(struct seq_file *m, void *v, int is_pid) } else if (vma->vm_start <= mm->brk && vma->vm_end >= mm->start_brk) { seq_printf(m, " heap"); } else { - pid_t tid = vm_is_stack(proc_priv->task, vma, is_pid); + pid_t tid = vm_is_stack(task, vma, is_pid); if (tid != 0) { /* * Thread stack in /proc/PID/task/TID/maps or diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 0b78fb9ea65..d04a8a54c29 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -1536,9 +1536,8 @@ asmlinkage long compat_sys_mbind(compat_ulong_t start, compat_ulong_t len, * * Returns effective policy for a VMA at specified address. * Falls back to @task or system default policy, as necessary. - * Current or other task's task mempolicy and non-shared vma policies - * are protected by the task's mmap_sem, which must be held for read by - * the caller. + * Current or other task's task mempolicy and non-shared vma policies must be + * protected by task_lock(task) by the caller. * Shared policies [those marked as MPOL_F_SHARED] require an extra reference * count--added by the get_policy() vm_op, as appropriate--to protect against * freeing by another task. It is the caller's responsibility to free the -- cgit v1.2.3-70-g09d2 From c772fc26f8938dd526a411a6162db95a33f56028 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Tue, 16 Oct 2012 12:55:19 -0700 Subject: MAINTAINERS: change email after moving for LED subsystem maintaining Signed-off-by: Bryan Wu Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index e73060fe078..e39e9da359a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4372,7 +4372,7 @@ F: Documentation/scsi/53c700.txt F: drivers/scsi/53c700* LED SUBSYSTEM -M: Bryan Wu +M: Bryan Wu M: Richard Purdie L: linux-leds@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git -- cgit v1.2.3-70-g09d2 From d1bdc40b3389b1165e705c7794441417ed2a43bd Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 16 Oct 2012 15:53:36 -0500 Subject: IPMI: Remove SMBus driver info from the docs Some documentation for the SMBus driver is in the IPMI docs, but that code is not in the kernel tree at this point. So remove the docs to avoid confusion. Signed-off-by: Corey Minyard Signed-off-by: Linus Torvalds --- Documentation/IPMI.txt | 65 +++----------------------------------------------- 1 file changed, 3 insertions(+), 62 deletions(-) diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt index b2bea15137d..16eb4c9e923 100644 --- a/Documentation/IPMI.txt +++ b/Documentation/IPMI.txt @@ -42,13 +42,7 @@ The driver interface depends on your hardware. If your system properly provides the SMBIOS info for IPMI, the driver will detect it and just work. If you have a board with a standard interface (These will generally be either "KCS", "SMIC", or "BT", consult your hardware -manual), choose the 'IPMI SI handler' option. A driver also exists -for direct I2C access to the IPMI management controller. Some boards -support this, but it is unknown if it will work on every board. For -this, choose 'IPMI SMBus handler', but be ready to try to do some -figuring to see if it will work on your system if the SMBIOS/APCI -information is wrong or not present. It is fairly safe to have both -these enabled and let the drivers auto-detect what is present. +manual), choose the 'IPMI SI handler' option. You should generally enable ACPI on your system, as systems with IPMI can have ACPI tables describing them. @@ -58,8 +52,7 @@ their job correctly, the IPMI controller should be automatically detected (via ACPI or SMBIOS tables) and should just work. Sadly, many boards do not have this information. The driver attempts standard defaults, but they may not work. If you fall into this -situation, you need to read the section below named 'The SI Driver' or -"The SMBus Driver" on how to hand-configure your system. +situation, you need to read the section below named 'The SI Driver'. IPMI defines a standard watchdog timer. You can enable this with the 'IPMI Watchdog Timer' config option. If you compile the driver into @@ -104,12 +97,7 @@ driver, each open file for this device ties in to the message handler as an IPMI user. ipmi_si - A driver for various system interfaces. This supports KCS, -SMIC, and BT interfaces. Unless you have an SMBus interface or your -own custom interface, you probably need to use this. - -ipmi_smb - A driver for accessing BMCs on the SMBus. It uses the -I2C kernel driver's SMBus interfaces to send and receive IPMI messages -over the SMBus. +SMIC, and BT interfaces. ipmi_watchdog - IPMI requires systems to have a very capable watchdog timer. This driver implements the standard Linux watchdog timer @@ -482,53 +470,6 @@ for specifying an interface. Note that when removing an interface, only the first three parameters (si type, address type, and address) are used for the comparison. Any options are ignored for removing. -The SMBus Driver ----------------- - -The SMBus driver allows up to 4 SMBus devices to be configured in the -system. By default, the driver will register any SMBus interfaces it finds -in the I2C address range of 0x20 to 0x4f on any adapter. You can change this -at module load time (for a module) with: - - modprobe ipmi_smb.o - addr=,[,,[,...]] - dbg=,... - [defaultprobe=1] [dbg_probe=1] - -The addresses are specified in pairs, the first is the adapter ID and the -second is the I2C address on that adapter. - -The debug flags are bit flags for each BMC found, they are: -IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8 - -Setting smb_defaultprobe to zero disabled the default probing of SMBus -interfaces at address range 0x20 to 0x4f. This means that only the -BMCs specified on the smb_addr line will be detected. - -Setting smb_dbg_probe to 1 will enable debugging of the probing and -detection process for BMCs on the SMBusses. - -Discovering the IPMI compliant BMC on the SMBus can cause devices -on the I2C bus to fail. The SMBus driver writes a "Get Device ID" IPMI -message as a block write to the I2C bus and waits for a response. -This action can be detrimental to some I2C devices. It is highly recommended -that the known I2c address be given to the SMBus driver in the smb_addr -parameter. The default address range will not be used when a smb_addr -parameter is provided. - -When compiled into the kernel, the addresses can be specified on the -kernel command line as: - - ipmb_smb.addr=,[,,[,...]] - ipmi_smb.dbg=,... - ipmi_smb.defaultprobe=0 ipmi_smb.dbg_probe=1 - -These are the same options as on the module command line. - -Note that you might need some I2C changes if CONFIG_IPMI_PANIC_EVENT -is enabled along with this, so the I2C driver knows to run to -completion during sending a panic event. - Other Pieces ------------ -- cgit v1.2.3-70-g09d2 From 4033741ff9f727fbf5efb9337c826703534d49b7 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 16 Oct 2012 15:53:37 -0500 Subject: ACPI: Reorder IPMI driver before any other ACPI drivers Drivers may make calls that require the ACPI IPMI driver to have been initialised already, so make sure that it appears earlier in the build order. Signed-off-by: Matthew Garrett Signed-off-by: Corey Minyard Signed-off-by: Linus Torvalds --- drivers/acpi/Makefile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 47199e2a913..82422fe90f8 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -47,6 +47,10 @@ acpi-y += video_detect.o endif # These are (potentially) separate modules + +# IPMI may be used by other drivers, so it has to initialise before them +obj-$(CONFIG_ACPI_IPMI) += acpi_ipmi.o + obj-$(CONFIG_ACPI_AC) += ac.o obj-$(CONFIG_ACPI_BUTTON) += button.o obj-$(CONFIG_ACPI_FAN) += fan.o @@ -70,6 +74,5 @@ processor-y += processor_idle.o processor_thermal.o processor-$(CONFIG_CPU_FREQ) += processor_perflib.o obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o -obj-$(CONFIG_ACPI_IPMI) += acpi_ipmi.o obj-$(CONFIG_ACPI_APEI) += apei/ -- cgit v1.2.3-70-g09d2 From 061475b65c126454aaaaddcbd40e7118424fc860 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 16 Oct 2012 15:53:38 -0500 Subject: IPMI: Change link order IPMI must be initialised before ACPI in order to ensure that any IPMI services are available before ACPI driver initialisation attempts to use any IPMI operation regions. Signed-off-by: Matthew Garrett Signed-off-by: Corey Minyard Signed-off-by: Linus Torvalds --- drivers/Makefile | 4 ++++ drivers/char/Makefile | 1 - 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/Makefile b/drivers/Makefile index 03da5b663ae..a16a8d001ae 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -17,6 +17,10 @@ obj-$(CONFIG_PARISC) += parisc/ obj-$(CONFIG_RAPIDIO) += rapidio/ obj-y += video/ obj-y += idle/ + +# IPMI must come before ACPI in order to provide IPMI opregion support +obj-$(CONFIG_IPMI_HANDLER) += char/ipmi/ + obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_SFI) += sfi/ # PnP must come after ACPI since it will eventually need to check if acpi diff --git a/drivers/char/Makefile b/drivers/char/Makefile index d0b27a39f1d..7ff1d0d208a 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -52,7 +52,6 @@ obj-$(CONFIG_TELCLOCK) += tlclk.o obj-$(CONFIG_MWAVE) += mwave/ obj-$(CONFIG_AGP) += agp/ obj-$(CONFIG_PCMCIA) += pcmcia/ -obj-$(CONFIG_IPMI_HANDLER) += ipmi/ obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o obj-$(CONFIG_TCG_TPM) += tpm/ -- cgit v1.2.3-70-g09d2 From 9ebca93bf3b350910c66516cbec68899eeddfd8e Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 16 Oct 2012 15:53:39 -0500 Subject: IPMI: Fix some uninitialized warning There was a spot where the compiler couldn't tell some variables would be set. So initialize them to make the warning go away. Signed-off-by: Corey Minyard Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_msghandler.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 2c29942b132..a0c84bb3085 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -1880,7 +1880,7 @@ int ipmi_request_supply_msgs(ipmi_user_t user, struct ipmi_recv_msg *supplied_recv, int priority) { - unsigned char saddr, lun; + unsigned char saddr = 0, lun = 0; int rv; if (!user) -- cgit v1.2.3-70-g09d2 From a6c16c2803089f032f86fe15e952176c0713d6e3 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 16 Oct 2012 15:53:40 -0500 Subject: IPMI: Detect register spacing on PCI interfaces The IPMI spec defines a way to detect register spacing for PCI interfaces, so implement it. Signed-off-by: Steven Hsieh Signed-off-by: Corey Minyard Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_si_intf.c | 36 ++++++++++++++++++++++++++++++++++-- 1 file changed, 34 insertions(+), 2 deletions(-) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 83f85cf7fb1..32a6c7e256b 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2424,6 +2424,38 @@ static void ipmi_pci_cleanup(struct smi_info *info) pci_disable_device(pdev); } +static int __devinit ipmi_pci_probe_regspacing(struct smi_info *info) +{ + if (info->si_type == SI_KCS) { + unsigned char status; + int regspacing; + + info->io.regsize = DEFAULT_REGSIZE; + info->io.regshift = 0; + info->io_size = 2; + info->handlers = &kcs_smi_handlers; + + /* detect 1, 4, 16byte spacing */ + for (regspacing = DEFAULT_REGSPACING; regspacing <= 16;) { + info->io.regspacing = regspacing; + if (info->io_setup(info)) { + dev_err(info->dev, + "Could not setup I/O space\n"); + return DEFAULT_REGSPACING; + } + /* write invalid cmd */ + info->io.outputb(&info->io, 1, 0x10); + /* read status back */ + status = info->io.inputb(&info->io, 1); + info->io_cleanup(info); + if (status) + return regspacing; + regspacing *= 4; + } + } + return DEFAULT_REGSPACING; +} + static int __devinit ipmi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -2476,8 +2508,8 @@ static int __devinit ipmi_pci_probe(struct pci_dev *pdev, } info->io.addr_data = pci_resource_start(pdev, 0); - info->io.regspacing = DEFAULT_REGSPACING; - info->io.regsize = DEFAULT_REGSPACING; + info->io.regspacing = ipmi_pci_probe_regspacing(info); + info->io.regsize = DEFAULT_REGSIZE; info->io.regshift = 0; info->irq = pdev->irq; -- cgit v1.2.3-70-g09d2 From 85eae82a0855d49852b87deac8653e4ebc8b291f Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 15 Oct 2012 21:35:59 -0700 Subject: printk: Fix scheduling-while-atomic problem in console_cpu_notify() The console_cpu_notify() function runs with interrupts disabled in the CPU_DYING case. It therefore cannot block, for example, as will happen when it calls console_lock(). Therefore, remove the CPU_DYING leg of the switch statement to avoid this problem. Signed-off-by: Paul E. McKenney Reviewed-by: Srivatsa S. Bhat Signed-off-by: Linus Torvalds --- kernel/printk.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/printk.c b/kernel/printk.c index 66a2ea37b57..2d607f4d179 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1890,7 +1890,6 @@ static int __cpuinit console_cpu_notify(struct notifier_block *self, switch (action) { case CPU_ONLINE: case CPU_DEAD: - case CPU_DYING: case CPU_DOWN_FAILED: case CPU_UP_CANCELED: console_lock(); -- cgit v1.2.3-70-g09d2 From 819e1c53ac6410f0ffbc2ee36b7de96988cdcf32 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 16 Oct 2012 00:10:13 +0100 Subject: FRV: Fix VLIW packing constraint violation in entry.S Fix VLIW packing constraint violation in entry.S: arch/frv/kernel/entry.S: Assembler messages: arch/frv/kernel/entry.S:871: Error: VLIW packing constraint violation When packing CALLL with OR, CALLL must go in the first slot. The instructions are executed simultaneously, so it doesn't matter which way round they're packed from that point of view. Signed-off-by: David Howells Acked-by: Al Viro Signed-off-by: Linus Torvalds --- arch/frv/kernel/entry.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index 00273296031..ee0beb354e4 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -867,8 +867,8 @@ ret_from_fork: ret_from_kernel_thread: lddi.p @(gr28,#REG_GR(8)),gr20 call schedule_tail - or.p gr20,gr20,gr8 - calll @(gr21,gr0) + calll.p @(gr21,gr0) + or gr20,gr20,gr8 bra sys_exit .globl ret_from_kernel_execve -- cgit v1.2.3-70-g09d2 From ce7bfc7cde0acd46a1d342fd64a0be15ad9e7930 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 16 Oct 2012 00:10:21 +0100 Subject: FRV: Fix incorrect symbol in copy_thread() Fix an incorrect symbol in copy_thread(): arch/frv/kernel/process.c: In function 'copy_thread': arch/frv/kernel/process.c:197: error: 'chilregs' undeclared (first use in this function) arch/frv/kernel/process.c:197: error: (Each undeclared identifier is reported only once arch/frv/kernel/process.c:197: error: for each function it appears in.) Reported-by: Geert Uytterhoeven Signed-off-by: David Howells Acked-by: Al Viro cc: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- arch/frv/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c index 655d90d20bb..e1e3aa196aa 100644 --- a/arch/frv/kernel/process.c +++ b/arch/frv/kernel/process.c @@ -194,7 +194,7 @@ int copy_thread(unsigned long clone_flags, memset(childregs, 0, sizeof(struct pt_regs)); childregs->gr9 = usp; /* function */ childregs->gr8 = arg; - chilregs->psr = PSR_S; + childregs->psr = PSR_S; p->thread.pc = (unsigned long) ret_from_kernel_thread; save_user_regs(p->thread.user); return 0; -- cgit v1.2.3-70-g09d2 From b4b5087173d09507f425714bc8d270615e5800b1 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 16 Oct 2012 00:10:28 +0100 Subject: FRV: Fix const sections change Add __pminitconst to fix the build, otherwise the following error can occur: arch/frv/kernel/setup.c:187:47: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token arch/frv/kernel/setup.c:386:2: error: 'clock_cmodes' undeclared (first use in this function) arch/frv/kernel/setup.c:571:6: error: 'clock_cmodes' undeclared (first use in this function) make[2]: *** [arch/frv/kernel/setup.o] Error 1 http://kisskb.ellerman.id.au/kisskb/buildresult/7344691/ Reported-by: Geert Uytterhoeven Signed-off-by: Andi Kleen Signed-off-by: David Howells cc: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- arch/frv/kernel/setup.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c index 1f1e5efb338..b8993c87d3d 100644 --- a/arch/frv/kernel/setup.c +++ b/arch/frv/kernel/setup.c @@ -112,9 +112,11 @@ char __initdata redboot_command_line[COMMAND_LINE_SIZE]; #ifdef CONFIG_PM #define __pminit #define __pminitdata +#define __pminitconst #else #define __pminit __init #define __pminitdata __initdata +#define __pminitconst __initconst #endif struct clock_cmode { -- cgit v1.2.3-70-g09d2 From 0c552e5fb9bec3d4942663a2a90e04a685fd8482 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 16 Oct 2012 00:10:35 +0100 Subject: FRV: Fix linux/elf-fdpic.h It seems I accidentally switched the guard on linux/elf-fdpic.h from #ifdef __KERNEL__ to #ifndef __KERNEL__ when attempting to expand the guarded region to cover the elf_fdpic_params struct when doing the UAPI split - with the result that the struct became unavailable to kernel code. Move incorrectly guarded bits back to the kernelspace header. Whilst we're at it, the __KERNEL__ guards can be deleted as they're no longer necessary. Reported-by: Fengguang Wu Reported-by: Lars-Peter Clausen Signed-off-by: David Howells cc: Fengguang Wu cc: Lars-Peter Clausen cc: uclinux-dev@uclinux.org Signed-off-by: Linus Torvalds --- include/linux/elf-fdpic.h | 51 ++++++++++++++++++++++++++++++++++++++++++ include/uapi/linux/elf-fdpic.h | 42 +++------------------------------- 2 files changed, 54 insertions(+), 39 deletions(-) create mode 100644 include/linux/elf-fdpic.h diff --git a/include/linux/elf-fdpic.h b/include/linux/elf-fdpic.h new file mode 100644 index 00000000000..386440317b0 --- /dev/null +++ b/include/linux/elf-fdpic.h @@ -0,0 +1,51 @@ +/* FDPIC ELF load map + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _LINUX_ELF_FDPIC_H +#define _LINUX_ELF_FDPIC_H + +#include + +/* + * binfmt binary parameters structure + */ +struct elf_fdpic_params { + struct elfhdr hdr; /* ref copy of ELF header */ + struct elf_phdr *phdrs; /* ref copy of PT_PHDR table */ + struct elf32_fdpic_loadmap *loadmap; /* loadmap to be passed to userspace */ + unsigned long elfhdr_addr; /* mapped ELF header user address */ + unsigned long ph_addr; /* mapped PT_PHDR user address */ + unsigned long map_addr; /* mapped loadmap user address */ + unsigned long entry_addr; /* mapped entry user address */ + unsigned long stack_size; /* stack size requested (PT_GNU_STACK) */ + unsigned long dynamic_addr; /* mapped PT_DYNAMIC user address */ + unsigned long load_addr; /* user address at which to map binary */ + unsigned long flags; +#define ELF_FDPIC_FLAG_ARRANGEMENT 0x0000000f /* PT_LOAD arrangement flags */ +#define ELF_FDPIC_FLAG_INDEPENDENT 0x00000000 /* PT_LOADs can be put anywhere */ +#define ELF_FDPIC_FLAG_HONOURVADDR 0x00000001 /* PT_LOAD.vaddr must be honoured */ +#define ELF_FDPIC_FLAG_CONSTDISP 0x00000002 /* PT_LOADs require constant + * displacement */ +#define ELF_FDPIC_FLAG_CONTIGUOUS 0x00000003 /* PT_LOADs should be contiguous */ +#define ELF_FDPIC_FLAG_EXEC_STACK 0x00000010 /* T if stack to be executable */ +#define ELF_FDPIC_FLAG_NOEXEC_STACK 0x00000020 /* T if stack not to be executable */ +#define ELF_FDPIC_FLAG_EXECUTABLE 0x00000040 /* T if this object is the executable */ +#define ELF_FDPIC_FLAG_PRESENT 0x80000000 /* T if this object is present */ +}; + +#ifdef CONFIG_MMU +extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params, + struct elf_fdpic_params *interp_params, + unsigned long *start_stack, + unsigned long *start_brk); +#endif + +#endif /* _LINUX_ELF_FDPIC_H */ diff --git a/include/uapi/linux/elf-fdpic.h b/include/uapi/linux/elf-fdpic.h index 1065078938f..3921e33aec8 100644 --- a/include/uapi/linux/elf-fdpic.h +++ b/include/uapi/linux/elf-fdpic.h @@ -9,8 +9,8 @@ * 2 of the License, or (at your option) any later version. */ -#ifndef _LINUX_ELF_FDPIC_H -#define _LINUX_ELF_FDPIC_H +#ifndef _UAPI_LINUX_ELF_FDPIC_H +#define _UAPI_LINUX_ELF_FDPIC_H #include @@ -31,40 +31,4 @@ struct elf32_fdpic_loadmap { #define ELF32_FDPIC_LOADMAP_VERSION 0x0000 -#ifndef __KERNEL__ -/* - * binfmt binary parameters structure - */ -struct elf_fdpic_params { - struct elfhdr hdr; /* ref copy of ELF header */ - struct elf_phdr *phdrs; /* ref copy of PT_PHDR table */ - struct elf32_fdpic_loadmap *loadmap; /* loadmap to be passed to userspace */ - unsigned long elfhdr_addr; /* mapped ELF header user address */ - unsigned long ph_addr; /* mapped PT_PHDR user address */ - unsigned long map_addr; /* mapped loadmap user address */ - unsigned long entry_addr; /* mapped entry user address */ - unsigned long stack_size; /* stack size requested (PT_GNU_STACK) */ - unsigned long dynamic_addr; /* mapped PT_DYNAMIC user address */ - unsigned long load_addr; /* user address at which to map binary */ - unsigned long flags; -#define ELF_FDPIC_FLAG_ARRANGEMENT 0x0000000f /* PT_LOAD arrangement flags */ -#define ELF_FDPIC_FLAG_INDEPENDENT 0x00000000 /* PT_LOADs can be put anywhere */ -#define ELF_FDPIC_FLAG_HONOURVADDR 0x00000001 /* PT_LOAD.vaddr must be honoured */ -#define ELF_FDPIC_FLAG_CONSTDISP 0x00000002 /* PT_LOADs require constant - * displacement */ -#define ELF_FDPIC_FLAG_CONTIGUOUS 0x00000003 /* PT_LOADs should be contiguous */ -#define ELF_FDPIC_FLAG_EXEC_STACK 0x00000010 /* T if stack to be executable */ -#define ELF_FDPIC_FLAG_NOEXEC_STACK 0x00000020 /* T if stack not to be executable */ -#define ELF_FDPIC_FLAG_EXECUTABLE 0x00000040 /* T if this object is the executable */ -#define ELF_FDPIC_FLAG_PRESENT 0x80000000 /* T if this object is present */ -}; - -#ifdef CONFIG_MMU -extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params, - struct elf_fdpic_params *interp_params, - unsigned long *start_stack, - unsigned long *start_brk); -#endif -#endif /* __KERNEL__ */ - -#endif /* _LINUX_ELF_FDPIC_H */ +#endif /* _UAPI_LINUX_ELF_FDPIC_H */ -- cgit v1.2.3-70-g09d2 From 9233ef6b559faa3db14144f41dea2e70d1ad0092 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 26 Sep 2012 16:22:32 +0100 Subject: ASoC: bells: Correct typo in sub speaker DAI name for WM5110 Signed-off-by: Mark Brown --- sound/soc/samsung/bells.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/samsung/bells.c b/sound/soc/samsung/bells.c index a2ca1567b9e..b0d46d63d55 100644 --- a/sound/soc/samsung/bells.c +++ b/sound/soc/samsung/bells.c @@ -212,7 +212,7 @@ static struct snd_soc_dai_link bells_dai_wm5102[] = { { .name = "Sub", .stream_name = "Sub", - .cpu_dai_name = "wm5102-aif3", + .cpu_dai_name = "wm5110-aif3", .codec_dai_name = "wm9081-hifi", .codec_name = "wm9081.1-006c", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF -- cgit v1.2.3-70-g09d2 From 71aa5ebe36a4e936eff281b375a4707b6a8320f2 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Wed, 17 Oct 2012 12:43:44 +0200 Subject: ALSA: hda - Always check array bounds in alc_get_line_out_pfx Even when CONFIG_SND_DEBUG is not enabled, we don't want to return an arbitrary memory location when the channel count is larger than we expected. Cc: stable@kernel.org Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8253b4eeb6a..48d9d609f89 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2598,8 +2598,10 @@ static const char *alc_get_line_out_pfx(struct alc_spec *spec, int ch, return "PCM"; break; } - if (snd_BUG_ON(ch >= ARRAY_SIZE(channel_name))) + if (ch >= ARRAY_SIZE(channel_name)) { + snd_BUG(); return "PCM"; + } return channel_name[ch]; } -- cgit v1.2.3-70-g09d2 From 3c5994c83895c89d344f24a86276f00d308e142b Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 17 Oct 2012 12:25:44 +0100 Subject: uapi: Allow automatic generation of uapi/asm/ header files Several arch/*/include/uapi/asm/* header simply include the corresponding file. This patch allows such files to be specified in uapi/asm/Kbuild via "generic-y += ..." to be automatically generated (similar to asm/Kbuild). Signed-off-by: Catalin Marinas Signed-off-by: David Howells Cc: Michal Marek Cc: Arnd Bergmann --- Makefile | 4 +++- scripts/Makefile.asm-generic | 2 +- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 5be2ee8c90e..366d0ab0c5f 100644 --- a/Makefile +++ b/Makefile @@ -437,7 +437,9 @@ endif PHONY += asm-generic asm-generic: $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ - obj=arch/$(SRCARCH)/include/generated/asm + src=asm obj=arch/$(SRCARCH)/include/generated/asm + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ + src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm # To make sure we do not include .config for any of the *config targets # catch them early, and hand them over to scripts/kconfig/Makefile diff --git a/scripts/Makefile.asm-generic b/scripts/Makefile.asm-generic index 40caf3c26cd..d17e0ea911e 100644 --- a/scripts/Makefile.asm-generic +++ b/scripts/Makefile.asm-generic @@ -5,7 +5,7 @@ # and for each file listed in this file with generic-y creates # a small wrapper file in $(obj) (arch/$(SRCARCH)/include/generated/asm) -kbuild-file := $(srctree)/arch/$(SRCARCH)/include/asm/Kbuild +kbuild-file := $(srctree)/arch/$(SRCARCH)/include/$(src)/Kbuild -include $(kbuild-file) include scripts/Kbuild.include -- cgit v1.2.3-70-g09d2 From 886927e4a4fb520d663c012f29d2f466915d7bd2 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:31:15 +0100 Subject: UAPI: Make uapi/linux/irqnr.h non-empty uapi/linux/irqnr.h was emitted by the UAPI disintegration script as an empty file because the parent linux/irqnr.h had no UAPI stuff in it, despite being marked with "header-y". Unfortunately, the patch program deletes the empty file when applying a kernel patch. It's not clear why this file is part of the UAPI at all. Looking in: /usr/include/linux/irqnr.h there's nothing there but a header reinclusion guard and a comment. So just stick a comment in there as a placeholder. Without this, if the kernel is fabricated from, say, a tarball and a patch, you can get this error when building x86_64 or usermode Linux (and probably others): include/linux/irqnr.h:4:30: fatal error: uapi/linux/irqnr.h: No such file or directory Reported-by: Randy Dunlap Reported-by: Alessandro Suardi Signed-off-by: David Howells cc: Randy Dunlap cc: Alessandro Suardi --- include/uapi/linux/irqnr.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/uapi/linux/irqnr.h b/include/uapi/linux/irqnr.h index e69de29bb2d..ae5704fa77a 100644 --- a/include/uapi/linux/irqnr.h +++ b/include/uapi/linux/irqnr.h @@ -0,0 +1,4 @@ +/* + * There isn't anything here anymore, but the file must not be empty or patch + * will delete it. + */ -- cgit v1.2.3-70-g09d2 From 0238047018d34946c08afc2f9e19053a3c25f0e1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:31:15 +0100 Subject: UAPI: Remove empty conditionals from include/linux/Kbuild Remove empty conditionals from include/linux/Kbuild as the contents, with new conditionals, have moved to include/uapi/linux/Kbuild. Signed-off-by: David Howells --- include/linux/Kbuild | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 5b57367e28d..7729c58544c 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -19,13 +19,3 @@ header-y += netfilter_ipv4/ header-y += netfilter_ipv6/ header-y += usb/ header-y += wimax/ - -ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \ - $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),) -endif -ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \ - $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h),) -endif -ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \ - $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),) -endif -- cgit v1.2.3-70-g09d2 From 64d7155cdfe5546ca0730daf7dd73ee52a74eeaf Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:31:15 +0100 Subject: UAPI: Remove empty non-UAPI Kbuild files Remove non-UAPI Kbuild files that have become empty as a result of UAPI disintegration. They used to have only header-y lines in them and those have now moved to the Kbuild files in the corresponding uapi/ directories. Possibly these should not be removed but rather have a comment inserted to say they are intentionally left blank. This would make it easier to add generated header lines in future without having to restore the infrastructure. Note that at this point not all the UAPI disintegration parts have been merged, so it is likely that more empty Kbuild files will turn up. It is probably necessary to make the files non-empty to prevent the patch program from automatically deleting them when it reduces them to nothing. Signed-off-by: David Howells --- include/Kbuild | 4 ---- include/asm-generic/Kbuild | 0 include/drm/Kbuild | 0 include/linux/Kbuild | 16 ---------------- include/linux/byteorder/Kbuild | 0 include/linux/caif/Kbuild | 0 include/linux/can/Kbuild | 0 include/linux/isdn/Kbuild | 0 include/linux/mmc/Kbuild | 0 include/linux/netfilter/Kbuild | 1 - include/linux/netfilter/ipset/Kbuild | 0 include/linux/netfilter_arp/Kbuild | 0 include/linux/netfilter_bridge/Kbuild | 0 include/linux/netfilter_ipv4/Kbuild | 0 include/linux/netfilter_ipv6/Kbuild | 0 include/linux/nfsd/Kbuild | 0 include/linux/spi/Kbuild | 0 include/linux/sunrpc/Kbuild | 0 include/linux/tc_act/Kbuild | 0 include/linux/tc_ematch/Kbuild | 0 include/linux/wimax/Kbuild | 0 include/mtd/Kbuild | 0 include/xen/Kbuild | 0 23 files changed, 21 deletions(-) delete mode 100644 include/asm-generic/Kbuild delete mode 100644 include/drm/Kbuild delete mode 100644 include/linux/byteorder/Kbuild delete mode 100644 include/linux/caif/Kbuild delete mode 100644 include/linux/can/Kbuild delete mode 100644 include/linux/isdn/Kbuild delete mode 100644 include/linux/mmc/Kbuild delete mode 100644 include/linux/netfilter/Kbuild delete mode 100644 include/linux/netfilter/ipset/Kbuild delete mode 100644 include/linux/netfilter_arp/Kbuild delete mode 100644 include/linux/netfilter_bridge/Kbuild delete mode 100644 include/linux/netfilter_ipv4/Kbuild delete mode 100644 include/linux/netfilter_ipv6/Kbuild delete mode 100644 include/linux/nfsd/Kbuild delete mode 100644 include/linux/spi/Kbuild delete mode 100644 include/linux/sunrpc/Kbuild delete mode 100644 include/linux/tc_act/Kbuild delete mode 100644 include/linux/tc_ematch/Kbuild delete mode 100644 include/linux/wimax/Kbuild delete mode 100644 include/mtd/Kbuild delete mode 100644 include/xen/Kbuild diff --git a/include/Kbuild b/include/Kbuild index 8d226bfa269..83256b64166 100644 --- a/include/Kbuild +++ b/include/Kbuild @@ -1,12 +1,8 @@ # Top-level Makefile calls into asm-$(ARCH) # List only non-arch directories below -header-y += asm-generic/ header-y += linux/ header-y += sound/ -header-y += mtd/ header-y += rdma/ header-y += video/ -header-y += drm/ -header-y += xen/ header-y += scsi/ diff --git a/include/asm-generic/Kbuild b/include/asm-generic/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/drm/Kbuild b/include/drm/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 7729c58544c..7fe2dae251e 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -1,21 +1,5 @@ -header-y += byteorder/ -header-y += can/ -header-y += caif/ header-y += dvb/ header-y += hdlc/ header-y += hsi/ -header-y += isdn/ -header-y += mmc/ -header-y += nfsd/ header-y += raid/ -header-y += spi/ -header-y += sunrpc/ -header-y += tc_act/ -header-y += tc_ematch/ -header-y += netfilter/ -header-y += netfilter_arp/ -header-y += netfilter_bridge/ -header-y += netfilter_ipv4/ -header-y += netfilter_ipv6/ header-y += usb/ -header-y += wimax/ diff --git a/include/linux/byteorder/Kbuild b/include/linux/byteorder/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/caif/Kbuild b/include/linux/caif/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/isdn/Kbuild b/include/linux/isdn/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/mmc/Kbuild b/include/linux/mmc/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild deleted file mode 100644 index b3322023e9a..00000000000 --- a/include/linux/netfilter/Kbuild +++ /dev/null @@ -1 +0,0 @@ -header-y += ipset/ diff --git a/include/linux/netfilter/ipset/Kbuild b/include/linux/netfilter/ipset/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/netfilter_arp/Kbuild b/include/linux/netfilter_arp/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/netfilter_bridge/Kbuild b/include/linux/netfilter_bridge/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/netfilter_ipv6/Kbuild b/include/linux/netfilter_ipv6/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/nfsd/Kbuild b/include/linux/nfsd/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/spi/Kbuild b/include/linux/spi/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/sunrpc/Kbuild b/include/linux/sunrpc/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/tc_act/Kbuild b/include/linux/tc_act/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/tc_ematch/Kbuild b/include/linux/tc_ematch/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/linux/wimax/Kbuild b/include/linux/wimax/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/mtd/Kbuild b/include/mtd/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/xen/Kbuild b/include/xen/Kbuild deleted file mode 100644 index e69de29bb2d..00000000000 -- cgit v1.2.3-70-g09d2 From 4c7b279c1a03392184c75fa5f38b58e2b9c882cf Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:31:16 +0100 Subject: UAPI: Place comments in empty arch Kbuilds to make them non-empty Place comments in: arch/mips/include/asm/Kbuild arch/tile/include/arch/Kbuild to make them non-empty so that the patch program doesn't remove them when it reduces them to nothing. Possibly they should be just deleted, but it's possible that they'll acquire generic-y or genhdr-y lines in future, so I'm keeping them around for the moment. Note that MIPS will compile happily if the file is deleted instead. I haven't tested TILE, but I suspect it will be the same there. Signed-off-by: David Howells cc: Ralf Baechle cc: Chris Metcalf --- arch/mips/include/asm/Kbuild | 1 + arch/tile/include/arch/Kbuild | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild index e69de29bb2d..533053d12ce 100644 --- a/arch/mips/include/asm/Kbuild +++ b/arch/mips/include/asm/Kbuild @@ -0,0 +1 @@ +# MIPS headers diff --git a/arch/tile/include/arch/Kbuild b/arch/tile/include/arch/Kbuild index e69de29bb2d..3751c9fabcf 100644 --- a/arch/tile/include/arch/Kbuild +++ b/arch/tile/include/arch/Kbuild @@ -0,0 +1 @@ +# Tile arch headers -- cgit v1.2.3-70-g09d2 From e4522fcb5a29ec55640082b445200e01d61e50ba Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:31:16 +0100 Subject: UAPI: The tile arch uses the generic ucontext.h file Move the header-y and generic-y lines for ucontext.h from arch/tile/include/asm/Kbuild to the uapi/ Kbuild as the asm-generic variant is used. Signed-off-by: David Howells cc: Chris Metcalf --- arch/tile/include/asm/Kbuild | 3 --- arch/tile/include/uapi/asm/Kbuild | 3 +++ 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild index c68808a09da..6948015e08a 100644 --- a/arch/tile/include/asm/Kbuild +++ b/arch/tile/include/asm/Kbuild @@ -1,8 +1,6 @@ header-y += ../arch/ -header-y += ucontext.h - generic-y += bug.h generic-y += bugs.h generic-y += clkdev.h @@ -37,5 +35,4 @@ generic-y += statfs.h generic-y += termbits.h generic-y += termios.h generic-y += types.h -generic-y += ucontext.h generic-y += xor.h diff --git a/arch/tile/include/uapi/asm/Kbuild b/arch/tile/include/uapi/asm/Kbuild index 5c6915fd30b..c20db8e428b 100644 --- a/arch/tile/include/uapi/asm/Kbuild +++ b/arch/tile/include/uapi/asm/Kbuild @@ -15,4 +15,7 @@ header-y += siginfo.h header-y += signal.h header-y += stat.h header-y += swab.h +header-y += ucontext.h header-y += unistd.h + +generic-y += ucontext.h -- cgit v1.2.3-70-g09d2 From 0420c87e648a3b623ad925038a0bcff2ef5a4bc9 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:32:07 +0100 Subject: UAPI: Put a comment into uapi/asm-generic/kvm_para.h and use it from arches Make uapi/asm-generic/kvm_para.h non-empty by addition of a comment to stop the patch program from deleting it when it creates it. Then delete empty arch-specific uapi/asm/kvm_para.h files and tell the Kbuild files to use the generic instead. Should this perhaps instead be a #warning or #error that the facility is unsupported on this arch? Signed-off-by: David Howells cc: Arnd Bergmann cc: Avi Kivity cc: Marcelo Tosatti cc: kvm@vger.kernel.org --- arch/ia64/include/uapi/asm/Kbuild | 2 ++ arch/ia64/include/uapi/asm/kvm_para.h | 0 arch/s390/include/uapi/asm/Kbuild | 2 ++ arch/s390/include/uapi/asm/kvm_para.h | 0 include/uapi/asm-generic/kvm_para.h | 4 ++++ 5 files changed, 8 insertions(+) delete mode 100644 arch/ia64/include/uapi/asm/kvm_para.h delete mode 100644 arch/s390/include/uapi/asm/kvm_para.h diff --git a/arch/ia64/include/uapi/asm/Kbuild b/arch/ia64/include/uapi/asm/Kbuild index 30cafac9370..1b3f5eb5fcd 100644 --- a/arch/ia64/include/uapi/asm/Kbuild +++ b/arch/ia64/include/uapi/asm/Kbuild @@ -1,6 +1,8 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +generic-y += kvm_para.h + header-y += auxvec.h header-y += bitsperlong.h header-y += break.h diff --git a/arch/ia64/include/uapi/asm/kvm_para.h b/arch/ia64/include/uapi/asm/kvm_para.h deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/arch/s390/include/uapi/asm/Kbuild b/arch/s390/include/uapi/asm/Kbuild index 7bf68fff7c5..59b67ed423b 100644 --- a/arch/s390/include/uapi/asm/Kbuild +++ b/arch/s390/include/uapi/asm/Kbuild @@ -1,6 +1,8 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +generic-y += kvm_para.h + header-y += auxvec.h header-y += bitsperlong.h header-y += byteorder.h diff --git a/arch/s390/include/uapi/asm/kvm_para.h b/arch/s390/include/uapi/asm/kvm_para.h deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/uapi/asm-generic/kvm_para.h b/include/uapi/asm-generic/kvm_para.h index e69de29bb2d..486f0af73c3 100644 --- a/include/uapi/asm-generic/kvm_para.h +++ b/include/uapi/asm-generic/kvm_para.h @@ -0,0 +1,4 @@ +/* + * There isn't anything here, but the file must not be empty or patch + * will delete it. + */ -- cgit v1.2.3-70-g09d2 From 11b8d2460c538697b813a8281db783f7bb7eb0ef Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:32:35 +0100 Subject: UAPI: Make arch/mn10300/include/uapi/asm/setup.h non-empty arch/mn10300/include/uapi/asm/setup.h was emitted by the UAPI disintegration script as an empty file because the parent file had no UAPI stuff in it, despite being marked with "header-y". Unfortunately, the patch program deletes resultant empty files when applying a kernel patch. So just stick a comment in there as a placeholder. Signed-off-by: David Howells --- arch/mn10300/include/uapi/asm/setup.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/mn10300/include/uapi/asm/setup.h b/arch/mn10300/include/uapi/asm/setup.h index e69de29bb2d..ae5704fa77a 100644 --- a/arch/mn10300/include/uapi/asm/setup.h +++ b/arch/mn10300/include/uapi/asm/setup.h @@ -0,0 +1,4 @@ +/* + * There isn't anything here anymore, but the file must not be empty or patch + * will delete it. + */ -- cgit v1.2.3-70-g09d2 From 588be3004da625eacb6ba091627e023986165d3b Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:32:35 +0100 Subject: UAPI: Make arch/sh/include/uapi/asm/hw_breakpoint.h non-empty arch/sh/include/uapi/asm/hw_breakpoint.h was emitted by the UAPI disintegration script as an empty file because the parent file had no UAPI stuff in it, despite being marked with "header-y". Unfortunately, the patch program deletes resultant empty files when applying a kernel patch. So just stick a comment in there as a placeholder. Signed-off-by: David Howells cc: Paul Mundt cc: linux-sh@vger.kernel.org --- arch/sh/include/uapi/asm/hw_breakpoint.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/sh/include/uapi/asm/hw_breakpoint.h b/arch/sh/include/uapi/asm/hw_breakpoint.h index e69de29bb2d..ae5704fa77a 100644 --- a/arch/sh/include/uapi/asm/hw_breakpoint.h +++ b/arch/sh/include/uapi/asm/hw_breakpoint.h @@ -0,0 +1,4 @@ +/* + * There isn't anything here anymore, but the file must not be empty or patch + * will delete it. + */ -- cgit v1.2.3-70-g09d2 From bb2bab177408e44079ba6bd37242fa8b26dfc2a7 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 17 Oct 2012 12:32:35 +0100 Subject: UAPI: Make arch/sparc/include/uapi/asm/sigcontext.h non-empty arch/sparc/include/uapi/asm/sigcontext.h was emitted by the UAPI disintegration script as an empty file because the parent file had no UAPI stuff in it, despite being marked with "header-y". Unfortunately, the patch program deletes resultant empty files when applying a kernel patch. So just stick a comment in there as a placeholder. Signed-off-by: David Howells cc: David S. Miller cc: sparclinux@vger.kernel.org --- arch/sparc/include/uapi/asm/sigcontext.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/sparc/include/uapi/asm/sigcontext.h b/arch/sparc/include/uapi/asm/sigcontext.h index e69de29bb2d..ae5704fa77a 100644 --- a/arch/sparc/include/uapi/asm/sigcontext.h +++ b/arch/sparc/include/uapi/asm/sigcontext.h @@ -0,0 +1,4 @@ +/* + * There isn't anything here anymore, but the file must not be empty or patch + * will delete it. + */ -- cgit v1.2.3-70-g09d2 From c57fd0219292884aabe368cf811cd1911acf798e Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Oct 2012 09:48:42 +0100 Subject: UAPI: (Scripted) Disintegrate include/linux/dvb Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones Signed-off-by: Mauro Carvalho Chehab --- include/linux/dvb/Kbuild | 8 - include/linux/dvb/audio.h | 135 ---------- include/linux/dvb/ca.h | 90 ------- include/linux/dvb/dmx.h | 130 +--------- include/linux/dvb/frontend.h | 516 -------------------------------------- include/linux/dvb/net.h | 52 ---- include/linux/dvb/osd.h | 144 ----------- include/linux/dvb/version.h | 29 --- include/linux/dvb/video.h | 249 +----------------- include/uapi/linux/dvb/Kbuild | 8 + include/uapi/linux/dvb/audio.h | 135 ++++++++++ include/uapi/linux/dvb/ca.h | 90 +++++++ include/uapi/linux/dvb/dmx.h | 155 ++++++++++++ include/uapi/linux/dvb/frontend.h | 516 ++++++++++++++++++++++++++++++++++++++ include/uapi/linux/dvb/net.h | 52 ++++ include/uapi/linux/dvb/osd.h | 144 +++++++++++ include/uapi/linux/dvb/version.h | 29 +++ include/uapi/linux/dvb/video.h | 274 ++++++++++++++++++++ 18 files changed, 1405 insertions(+), 1351 deletions(-) delete mode 100644 include/linux/dvb/audio.h delete mode 100644 include/linux/dvb/ca.h delete mode 100644 include/linux/dvb/frontend.h delete mode 100644 include/linux/dvb/net.h delete mode 100644 include/linux/dvb/osd.h delete mode 100644 include/linux/dvb/version.h create mode 100644 include/uapi/linux/dvb/audio.h create mode 100644 include/uapi/linux/dvb/ca.h create mode 100644 include/uapi/linux/dvb/dmx.h create mode 100644 include/uapi/linux/dvb/frontend.h create mode 100644 include/uapi/linux/dvb/net.h create mode 100644 include/uapi/linux/dvb/osd.h create mode 100644 include/uapi/linux/dvb/version.h create mode 100644 include/uapi/linux/dvb/video.h diff --git a/include/linux/dvb/Kbuild b/include/linux/dvb/Kbuild index f4dba8637f9..e69de29bb2d 100644 --- a/include/linux/dvb/Kbuild +++ b/include/linux/dvb/Kbuild @@ -1,8 +0,0 @@ -header-y += audio.h -header-y += ca.h -header-y += dmx.h -header-y += frontend.h -header-y += net.h -header-y += osd.h -header-y += version.h -header-y += video.h diff --git a/include/linux/dvb/audio.h b/include/linux/dvb/audio.h deleted file mode 100644 index d47bccd604e..00000000000 --- a/include/linux/dvb/audio.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * audio.h - * - * Copyright (C) 2000 Ralph Metzler - * & Marcus Metzler - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Lesser Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#ifndef _DVBAUDIO_H_ -#define _DVBAUDIO_H_ - -#include - -typedef enum { - AUDIO_SOURCE_DEMUX, /* Select the demux as the main source */ - AUDIO_SOURCE_MEMORY /* Select internal memory as the main source */ -} audio_stream_source_t; - - -typedef enum { - AUDIO_STOPPED, /* Device is stopped */ - AUDIO_PLAYING, /* Device is currently playing */ - AUDIO_PAUSED /* Device is paused */ -} audio_play_state_t; - - -typedef enum { - AUDIO_STEREO, - AUDIO_MONO_LEFT, - AUDIO_MONO_RIGHT, - AUDIO_MONO, - AUDIO_STEREO_SWAPPED -} audio_channel_select_t; - - -typedef struct audio_mixer { - unsigned int volume_left; - unsigned int volume_right; - // what else do we need? bass, pass-through, ... -} audio_mixer_t; - - -typedef struct audio_status { - int AV_sync_state; /* sync audio and video? */ - int mute_state; /* audio is muted */ - audio_play_state_t play_state; /* current playback state */ - audio_stream_source_t stream_source; /* current stream source */ - audio_channel_select_t channel_select; /* currently selected channel */ - int bypass_mode; /* pass on audio data to */ - audio_mixer_t mixer_state; /* current mixer state */ -} audio_status_t; /* separate decoder hardware */ - - -typedef -struct audio_karaoke { /* if Vocal1 or Vocal2 are non-zero, they get mixed */ - int vocal1; /* into left and right t at 70% each */ - int vocal2; /* if both, Vocal1 and Vocal2 are non-zero, Vocal1 gets*/ - int melody; /* mixed into the left channel and */ - /* Vocal2 into the right channel at 100% each. */ - /* if Melody is non-zero, the melody channel gets mixed*/ -} audio_karaoke_t; /* into left and right */ - - -typedef __u16 audio_attributes_t; -/* bits: descr. */ -/* 15-13 audio coding mode (0=ac3, 2=mpeg1, 3=mpeg2ext, 4=LPCM, 6=DTS, */ -/* 12 multichannel extension */ -/* 11-10 audio type (0=not spec, 1=language included) */ -/* 9- 8 audio application mode (0=not spec, 1=karaoke, 2=surround) */ -/* 7- 6 Quantization / DRC (mpeg audio: 1=DRC exists)(lpcm: 0=16bit, */ -/* 5- 4 Sample frequency fs (0=48kHz, 1=96kHz) */ -/* 2- 0 number of audio channels (n+1 channels) */ - - -/* for GET_CAPABILITIES and SET_FORMAT, the latter should only set one bit */ -#define AUDIO_CAP_DTS 1 -#define AUDIO_CAP_LPCM 2 -#define AUDIO_CAP_MP1 4 -#define AUDIO_CAP_MP2 8 -#define AUDIO_CAP_MP3 16 -#define AUDIO_CAP_AAC 32 -#define AUDIO_CAP_OGG 64 -#define AUDIO_CAP_SDDS 128 -#define AUDIO_CAP_AC3 256 - -#define AUDIO_STOP _IO('o', 1) -#define AUDIO_PLAY _IO('o', 2) -#define AUDIO_PAUSE _IO('o', 3) -#define AUDIO_CONTINUE _IO('o', 4) -#define AUDIO_SELECT_SOURCE _IO('o', 5) -#define AUDIO_SET_MUTE _IO('o', 6) -#define AUDIO_SET_AV_SYNC _IO('o', 7) -#define AUDIO_SET_BYPASS_MODE _IO('o', 8) -#define AUDIO_CHANNEL_SELECT _IO('o', 9) -#define AUDIO_GET_STATUS _IOR('o', 10, audio_status_t) - -#define AUDIO_GET_CAPABILITIES _IOR('o', 11, unsigned int) -#define AUDIO_CLEAR_BUFFER _IO('o', 12) -#define AUDIO_SET_ID _IO('o', 13) -#define AUDIO_SET_MIXER _IOW('o', 14, audio_mixer_t) -#define AUDIO_SET_STREAMTYPE _IO('o', 15) -#define AUDIO_SET_EXT_ID _IO('o', 16) -#define AUDIO_SET_ATTRIBUTES _IOW('o', 17, audio_attributes_t) -#define AUDIO_SET_KARAOKE _IOW('o', 18, audio_karaoke_t) - -/** - * AUDIO_GET_PTS - * - * Read the 33 bit presentation time stamp as defined - * in ITU T-REC-H.222.0 / ISO/IEC 13818-1. - * - * The PTS should belong to the currently played - * frame if possible, but may also be a value close to it - * like the PTS of the last decoded frame or the last PTS - * extracted by the PES parser. - */ -#define AUDIO_GET_PTS _IOR('o', 19, __u64) -#define AUDIO_BILINGUAL_CHANNEL_SELECT _IO('o', 20) - -#endif /* _DVBAUDIO_H_ */ diff --git a/include/linux/dvb/ca.h b/include/linux/dvb/ca.h deleted file mode 100644 index c18537f3e44..00000000000 --- a/include/linux/dvb/ca.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * ca.h - * - * Copyright (C) 2000 Ralph Metzler - * & Marcus Metzler - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Lesser Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#ifndef _DVBCA_H_ -#define _DVBCA_H_ - -/* slot interface types and info */ - -typedef struct ca_slot_info { - int num; /* slot number */ - - int type; /* CA interface this slot supports */ -#define CA_CI 1 /* CI high level interface */ -#define CA_CI_LINK 2 /* CI link layer level interface */ -#define CA_CI_PHYS 4 /* CI physical layer level interface */ -#define CA_DESCR 8 /* built-in descrambler */ -#define CA_SC 128 /* simple smart card interface */ - - unsigned int flags; -#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */ -#define CA_CI_MODULE_READY 2 -} ca_slot_info_t; - - -/* descrambler types and info */ - -typedef struct ca_descr_info { - unsigned int num; /* number of available descramblers (keys) */ - unsigned int type; /* type of supported scrambling system */ -#define CA_ECD 1 -#define CA_NDS 2 -#define CA_DSS 4 -} ca_descr_info_t; - -typedef struct ca_caps { - unsigned int slot_num; /* total number of CA card and module slots */ - unsigned int slot_type; /* OR of all supported types */ - unsigned int descr_num; /* total number of descrambler slots (keys) */ - unsigned int descr_type; /* OR of all supported types */ -} ca_caps_t; - -/* a message to/from a CI-CAM */ -typedef struct ca_msg { - unsigned int index; - unsigned int type; - unsigned int length; - unsigned char msg[256]; -} ca_msg_t; - -typedef struct ca_descr { - unsigned int index; - unsigned int parity; /* 0 == even, 1 == odd */ - unsigned char cw[8]; -} ca_descr_t; - -typedef struct ca_pid { - unsigned int pid; - int index; /* -1 == disable*/ -} ca_pid_t; - -#define CA_RESET _IO('o', 128) -#define CA_GET_CAP _IOR('o', 129, ca_caps_t) -#define CA_GET_SLOT_INFO _IOR('o', 130, ca_slot_info_t) -#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t) -#define CA_GET_MSG _IOR('o', 132, ca_msg_t) -#define CA_SEND_MSG _IOW('o', 133, ca_msg_t) -#define CA_SET_DESCR _IOW('o', 134, ca_descr_t) -#define CA_SET_PID _IOW('o', 135, ca_pid_t) - -#endif diff --git a/include/linux/dvb/dmx.h b/include/linux/dvb/dmx.h index f078f3ac82d..0be6d8f2b52 100644 --- a/include/linux/dvb/dmx.h +++ b/include/linux/dvb/dmx.h @@ -20,138 +20,10 @@ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * */ - #ifndef _DVBDMX_H_ #define _DVBDMX_H_ -#include -#ifdef __KERNEL__ #include -#else -#include -#endif - - -#define DMX_FILTER_SIZE 16 - -typedef enum -{ - DMX_OUT_DECODER, /* Streaming directly to decoder. */ - DMX_OUT_TAP, /* Output going to a memory buffer */ - /* (to be retrieved via the read command).*/ - DMX_OUT_TS_TAP, /* Output multiplexed into a new TS */ - /* (to be retrieved by reading from the */ - /* logical DVR device). */ - DMX_OUT_TSDEMUX_TAP /* Like TS_TAP but retrieved from the DMX device */ -} dmx_output_t; - - -typedef enum -{ - DMX_IN_FRONTEND, /* Input from a front-end device. */ - DMX_IN_DVR /* Input from the logical DVR device. */ -} dmx_input_t; - - -typedef enum -{ - DMX_PES_AUDIO0, - DMX_PES_VIDEO0, - DMX_PES_TELETEXT0, - DMX_PES_SUBTITLE0, - DMX_PES_PCR0, - - DMX_PES_AUDIO1, - DMX_PES_VIDEO1, - DMX_PES_TELETEXT1, - DMX_PES_SUBTITLE1, - DMX_PES_PCR1, - - DMX_PES_AUDIO2, - DMX_PES_VIDEO2, - DMX_PES_TELETEXT2, - DMX_PES_SUBTITLE2, - DMX_PES_PCR2, - - DMX_PES_AUDIO3, - DMX_PES_VIDEO3, - DMX_PES_TELETEXT3, - DMX_PES_SUBTITLE3, - DMX_PES_PCR3, - - DMX_PES_OTHER -} dmx_pes_type_t; - -#define DMX_PES_AUDIO DMX_PES_AUDIO0 -#define DMX_PES_VIDEO DMX_PES_VIDEO0 -#define DMX_PES_TELETEXT DMX_PES_TELETEXT0 -#define DMX_PES_SUBTITLE DMX_PES_SUBTITLE0 -#define DMX_PES_PCR DMX_PES_PCR0 - - -typedef struct dmx_filter -{ - __u8 filter[DMX_FILTER_SIZE]; - __u8 mask[DMX_FILTER_SIZE]; - __u8 mode[DMX_FILTER_SIZE]; -} dmx_filter_t; - - -struct dmx_sct_filter_params -{ - __u16 pid; - dmx_filter_t filter; - __u32 timeout; - __u32 flags; -#define DMX_CHECK_CRC 1 -#define DMX_ONESHOT 2 -#define DMX_IMMEDIATE_START 4 -#define DMX_KERNEL_CLIENT 0x8000 -}; - - -struct dmx_pes_filter_params -{ - __u16 pid; - dmx_input_t input; - dmx_output_t output; - dmx_pes_type_t pes_type; - __u32 flags; -}; - -typedef struct dmx_caps { - __u32 caps; - int num_decoders; -} dmx_caps_t; - -typedef enum { - DMX_SOURCE_FRONT0 = 0, - DMX_SOURCE_FRONT1, - DMX_SOURCE_FRONT2, - DMX_SOURCE_FRONT3, - DMX_SOURCE_DVR0 = 16, - DMX_SOURCE_DVR1, - DMX_SOURCE_DVR2, - DMX_SOURCE_DVR3 -} dmx_source_t; - -struct dmx_stc { - unsigned int num; /* input : which STC? 0..N */ - unsigned int base; /* output: divisor for stc to get 90 kHz clock */ - __u64 stc; /* output: stc in 'base'*90 kHz units */ -}; - - -#define DMX_START _IO('o', 41) -#define DMX_STOP _IO('o', 42) -#define DMX_SET_FILTER _IOW('o', 43, struct dmx_sct_filter_params) -#define DMX_SET_PES_FILTER _IOW('o', 44, struct dmx_pes_filter_params) -#define DMX_SET_BUFFER_SIZE _IO('o', 45) -#define DMX_GET_PES_PIDS _IOR('o', 47, __u16[5]) -#define DMX_GET_CAPS _IOR('o', 48, dmx_caps_t) -#define DMX_SET_SOURCE _IOW('o', 49, dmx_source_t) -#define DMX_GET_STC _IOWR('o', 50, struct dmx_stc) -#define DMX_ADD_PID _IOW('o', 51, __u16) -#define DMX_REMOVE_PID _IOW('o', 52, __u16) +#include #endif /*_DVBDMX_H_*/ diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h deleted file mode 100644 index c12d452cb40..00000000000 --- a/include/linux/dvb/frontend.h +++ /dev/null @@ -1,516 +0,0 @@ -/* - * frontend.h - * - * Copyright (C) 2000 Marcus Metzler - * Ralph Metzler - * Holger Waechtler - * Andre Draszik - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#ifndef _DVBFRONTEND_H_ -#define _DVBFRONTEND_H_ - -#include - -typedef enum fe_type { - FE_QPSK, - FE_QAM, - FE_OFDM, - FE_ATSC -} fe_type_t; - - -typedef enum fe_caps { - FE_IS_STUPID = 0, - FE_CAN_INVERSION_AUTO = 0x1, - FE_CAN_FEC_1_2 = 0x2, - FE_CAN_FEC_2_3 = 0x4, - FE_CAN_FEC_3_4 = 0x8, - FE_CAN_FEC_4_5 = 0x10, - FE_CAN_FEC_5_6 = 0x20, - FE_CAN_FEC_6_7 = 0x40, - FE_CAN_FEC_7_8 = 0x80, - FE_CAN_FEC_8_9 = 0x100, - FE_CAN_FEC_AUTO = 0x200, - FE_CAN_QPSK = 0x400, - FE_CAN_QAM_16 = 0x800, - FE_CAN_QAM_32 = 0x1000, - FE_CAN_QAM_64 = 0x2000, - FE_CAN_QAM_128 = 0x4000, - FE_CAN_QAM_256 = 0x8000, - FE_CAN_QAM_AUTO = 0x10000, - FE_CAN_TRANSMISSION_MODE_AUTO = 0x20000, - FE_CAN_BANDWIDTH_AUTO = 0x40000, - FE_CAN_GUARD_INTERVAL_AUTO = 0x80000, - FE_CAN_HIERARCHY_AUTO = 0x100000, - FE_CAN_8VSB = 0x200000, - FE_CAN_16VSB = 0x400000, - FE_HAS_EXTENDED_CAPS = 0x800000, /* We need more bitspace for newer APIs, indicate this. */ - FE_CAN_MULTISTREAM = 0x4000000, /* frontend supports multistream filtering */ - FE_CAN_TURBO_FEC = 0x8000000, /* frontend supports "turbo fec modulation" */ - FE_CAN_2G_MODULATION = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */ - FE_NEEDS_BENDING = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */ - FE_CAN_RECOVER = 0x40000000, /* frontend can recover from a cable unplug automatically */ - FE_CAN_MUTE_TS = 0x80000000 /* frontend can stop spurious TS data output */ -} fe_caps_t; - - -struct dvb_frontend_info { - char name[128]; - fe_type_t type; /* DEPRECATED. Use DTV_ENUM_DELSYS instead */ - __u32 frequency_min; - __u32 frequency_max; - __u32 frequency_stepsize; - __u32 frequency_tolerance; - __u32 symbol_rate_min; - __u32 symbol_rate_max; - __u32 symbol_rate_tolerance; /* ppm */ - __u32 notifier_delay; /* DEPRECATED */ - fe_caps_t caps; -}; - - -/** - * Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for - * the meaning of this struct... - */ -struct dvb_diseqc_master_cmd { - __u8 msg [6]; /* { framing, address, command, data [3] } */ - __u8 msg_len; /* valid values are 3...6 */ -}; - - -struct dvb_diseqc_slave_reply { - __u8 msg [4]; /* { framing, data [3] } */ - __u8 msg_len; /* valid values are 0...4, 0 means no msg */ - int timeout; /* return from ioctl after timeout ms with */ -}; /* errorcode when no message was received */ - - -typedef enum fe_sec_voltage { - SEC_VOLTAGE_13, - SEC_VOLTAGE_18, - SEC_VOLTAGE_OFF -} fe_sec_voltage_t; - - -typedef enum fe_sec_tone_mode { - SEC_TONE_ON, - SEC_TONE_OFF -} fe_sec_tone_mode_t; - - -typedef enum fe_sec_mini_cmd { - SEC_MINI_A, - SEC_MINI_B -} fe_sec_mini_cmd_t; - - -/** - * enum fe_status - enumerates the possible frontend status - * @FE_HAS_SIGNAL: found something above the noise level - * @FE_HAS_CARRIER: found a DVB signal - * @FE_HAS_VITERBI: FEC is stable - * @FE_HAS_SYNC: found sync bytes - * @FE_HAS_LOCK: everything's working - * @FE_TIMEDOUT: no lock within the last ~2 seconds - * @FE_REINIT: frontend was reinitialized, application is recommended - * to reset DiSEqC, tone and parameters - */ - -typedef enum fe_status { - FE_HAS_SIGNAL = 0x01, - FE_HAS_CARRIER = 0x02, - FE_HAS_VITERBI = 0x04, - FE_HAS_SYNC = 0x08, - FE_HAS_LOCK = 0x10, - FE_TIMEDOUT = 0x20, - FE_REINIT = 0x40, -} fe_status_t; - -typedef enum fe_spectral_inversion { - INVERSION_OFF, - INVERSION_ON, - INVERSION_AUTO -} fe_spectral_inversion_t; - - -typedef enum fe_code_rate { - FEC_NONE = 0, - FEC_1_2, - FEC_2_3, - FEC_3_4, - FEC_4_5, - FEC_5_6, - FEC_6_7, - FEC_7_8, - FEC_8_9, - FEC_AUTO, - FEC_3_5, - FEC_9_10, - FEC_2_5, -} fe_code_rate_t; - - -typedef enum fe_modulation { - QPSK, - QAM_16, - QAM_32, - QAM_64, - QAM_128, - QAM_256, - QAM_AUTO, - VSB_8, - VSB_16, - PSK_8, - APSK_16, - APSK_32, - DQPSK, - QAM_4_NR, -} fe_modulation_t; - -typedef enum fe_transmit_mode { - TRANSMISSION_MODE_2K, - TRANSMISSION_MODE_8K, - TRANSMISSION_MODE_AUTO, - TRANSMISSION_MODE_4K, - TRANSMISSION_MODE_1K, - TRANSMISSION_MODE_16K, - TRANSMISSION_MODE_32K, - TRANSMISSION_MODE_C1, - TRANSMISSION_MODE_C3780, -} fe_transmit_mode_t; - -#if defined(__DVB_CORE__) || !defined (__KERNEL__) -typedef enum fe_bandwidth { - BANDWIDTH_8_MHZ, - BANDWIDTH_7_MHZ, - BANDWIDTH_6_MHZ, - BANDWIDTH_AUTO, - BANDWIDTH_5_MHZ, - BANDWIDTH_10_MHZ, - BANDWIDTH_1_712_MHZ, -} fe_bandwidth_t; -#endif - -typedef enum fe_guard_interval { - GUARD_INTERVAL_1_32, - GUARD_INTERVAL_1_16, - GUARD_INTERVAL_1_8, - GUARD_INTERVAL_1_4, - GUARD_INTERVAL_AUTO, - GUARD_INTERVAL_1_128, - GUARD_INTERVAL_19_128, - GUARD_INTERVAL_19_256, - GUARD_INTERVAL_PN420, - GUARD_INTERVAL_PN595, - GUARD_INTERVAL_PN945, -} fe_guard_interval_t; - - -typedef enum fe_hierarchy { - HIERARCHY_NONE, - HIERARCHY_1, - HIERARCHY_2, - HIERARCHY_4, - HIERARCHY_AUTO -} fe_hierarchy_t; - -enum fe_interleaving { - INTERLEAVING_NONE, - INTERLEAVING_AUTO, - INTERLEAVING_240, - INTERLEAVING_720, -}; - -#if defined(__DVB_CORE__) || !defined (__KERNEL__) -struct dvb_qpsk_parameters { - __u32 symbol_rate; /* symbol rate in Symbols per second */ - fe_code_rate_t fec_inner; /* forward error correction (see above) */ -}; - -struct dvb_qam_parameters { - __u32 symbol_rate; /* symbol rate in Symbols per second */ - fe_code_rate_t fec_inner; /* forward error correction (see above) */ - fe_modulation_t modulation; /* modulation type (see above) */ -}; - -struct dvb_vsb_parameters { - fe_modulation_t modulation; /* modulation type (see above) */ -}; - -struct dvb_ofdm_parameters { - fe_bandwidth_t bandwidth; - fe_code_rate_t code_rate_HP; /* high priority stream code rate */ - fe_code_rate_t code_rate_LP; /* low priority stream code rate */ - fe_modulation_t constellation; /* modulation type (see above) */ - fe_transmit_mode_t transmission_mode; - fe_guard_interval_t guard_interval; - fe_hierarchy_t hierarchy_information; -}; - - -struct dvb_frontend_parameters { - __u32 frequency; /* (absolute) frequency in Hz for QAM/OFDM/ATSC */ - /* intermediate frequency in kHz for QPSK */ - fe_spectral_inversion_t inversion; - union { - struct dvb_qpsk_parameters qpsk; - struct dvb_qam_parameters qam; - struct dvb_ofdm_parameters ofdm; - struct dvb_vsb_parameters vsb; - } u; -}; - -struct dvb_frontend_event { - fe_status_t status; - struct dvb_frontend_parameters parameters; -}; -#endif - -/* S2API Commands */ -#define DTV_UNDEFINED 0 -#define DTV_TUNE 1 -#define DTV_CLEAR 2 -#define DTV_FREQUENCY 3 -#define DTV_MODULATION 4 -#define DTV_BANDWIDTH_HZ 5 -#define DTV_INVERSION 6 -#define DTV_DISEQC_MASTER 7 -#define DTV_SYMBOL_RATE 8 -#define DTV_INNER_FEC 9 -#define DTV_VOLTAGE 10 -#define DTV_TONE 11 -#define DTV_PILOT 12 -#define DTV_ROLLOFF 13 -#define DTV_DISEQC_SLAVE_REPLY 14 - -/* Basic enumeration set for querying unlimited capabilities */ -#define DTV_FE_CAPABILITY_COUNT 15 -#define DTV_FE_CAPABILITY 16 -#define DTV_DELIVERY_SYSTEM 17 - -/* ISDB-T and ISDB-Tsb */ -#define DTV_ISDBT_PARTIAL_RECEPTION 18 -#define DTV_ISDBT_SOUND_BROADCASTING 19 - -#define DTV_ISDBT_SB_SUBCHANNEL_ID 20 -#define DTV_ISDBT_SB_SEGMENT_IDX 21 -#define DTV_ISDBT_SB_SEGMENT_COUNT 22 - -#define DTV_ISDBT_LAYERA_FEC 23 -#define DTV_ISDBT_LAYERA_MODULATION 24 -#define DTV_ISDBT_LAYERA_SEGMENT_COUNT 25 -#define DTV_ISDBT_LAYERA_TIME_INTERLEAVING 26 - -#define DTV_ISDBT_LAYERB_FEC 27 -#define DTV_ISDBT_LAYERB_MODULATION 28 -#define DTV_ISDBT_LAYERB_SEGMENT_COUNT 29 -#define DTV_ISDBT_LAYERB_TIME_INTERLEAVING 30 - -#define DTV_ISDBT_LAYERC_FEC 31 -#define DTV_ISDBT_LAYERC_MODULATION 32 -#define DTV_ISDBT_LAYERC_SEGMENT_COUNT 33 -#define DTV_ISDBT_LAYERC_TIME_INTERLEAVING 34 - -#define DTV_API_VERSION 35 - -#define DTV_CODE_RATE_HP 36 -#define DTV_CODE_RATE_LP 37 -#define DTV_GUARD_INTERVAL 38 -#define DTV_TRANSMISSION_MODE 39 -#define DTV_HIERARCHY 40 - -#define DTV_ISDBT_LAYER_ENABLED 41 - -#define DTV_STREAM_ID 42 -#define DTV_ISDBS_TS_ID_LEGACY DTV_STREAM_ID -#define DTV_DVBT2_PLP_ID_LEGACY 43 - -#define DTV_ENUM_DELSYS 44 - -/* ATSC-MH */ -#define DTV_ATSCMH_FIC_VER 45 -#define DTV_ATSCMH_PARADE_ID 46 -#define DTV_ATSCMH_NOG 47 -#define DTV_ATSCMH_TNOG 48 -#define DTV_ATSCMH_SGN 49 -#define DTV_ATSCMH_PRC 50 -#define DTV_ATSCMH_RS_FRAME_MODE 51 -#define DTV_ATSCMH_RS_FRAME_ENSEMBLE 52 -#define DTV_ATSCMH_RS_CODE_MODE_PRI 53 -#define DTV_ATSCMH_RS_CODE_MODE_SEC 54 -#define DTV_ATSCMH_SCCC_BLOCK_MODE 55 -#define DTV_ATSCMH_SCCC_CODE_MODE_A 56 -#define DTV_ATSCMH_SCCC_CODE_MODE_B 57 -#define DTV_ATSCMH_SCCC_CODE_MODE_C 58 -#define DTV_ATSCMH_SCCC_CODE_MODE_D 59 - -#define DTV_INTERLEAVING 60 -#define DTV_LNA 61 - -#define DTV_MAX_COMMAND DTV_LNA - -typedef enum fe_pilot { - PILOT_ON, - PILOT_OFF, - PILOT_AUTO, -} fe_pilot_t; - -typedef enum fe_rolloff { - ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */ - ROLLOFF_20, - ROLLOFF_25, - ROLLOFF_AUTO, -} fe_rolloff_t; - -typedef enum fe_delivery_system { - SYS_UNDEFINED, - SYS_DVBC_ANNEX_A, - SYS_DVBC_ANNEX_B, - SYS_DVBT, - SYS_DSS, - SYS_DVBS, - SYS_DVBS2, - SYS_DVBH, - SYS_ISDBT, - SYS_ISDBS, - SYS_ISDBC, - SYS_ATSC, - SYS_ATSCMH, - SYS_DTMB, - SYS_CMMB, - SYS_DAB, - SYS_DVBT2, - SYS_TURBO, - SYS_DVBC_ANNEX_C, -} fe_delivery_system_t; - -/* backward compatibility */ -#define SYS_DVBC_ANNEX_AC SYS_DVBC_ANNEX_A -#define SYS_DMBTH SYS_DTMB /* DMB-TH is legacy name, use DTMB instead */ - -/* ATSC-MH */ - -enum atscmh_sccc_block_mode { - ATSCMH_SCCC_BLK_SEP = 0, - ATSCMH_SCCC_BLK_COMB = 1, - ATSCMH_SCCC_BLK_RES = 2, -}; - -enum atscmh_sccc_code_mode { - ATSCMH_SCCC_CODE_HLF = 0, - ATSCMH_SCCC_CODE_QTR = 1, - ATSCMH_SCCC_CODE_RES = 2, -}; - -enum atscmh_rs_frame_ensemble { - ATSCMH_RSFRAME_ENS_PRI = 0, - ATSCMH_RSFRAME_ENS_SEC = 1, -}; - -enum atscmh_rs_frame_mode { - ATSCMH_RSFRAME_PRI_ONLY = 0, - ATSCMH_RSFRAME_PRI_SEC = 1, - ATSCMH_RSFRAME_RES = 2, -}; - -enum atscmh_rs_code_mode { - ATSCMH_RSCODE_211_187 = 0, - ATSCMH_RSCODE_223_187 = 1, - ATSCMH_RSCODE_235_187 = 2, - ATSCMH_RSCODE_RES = 3, -}; - -#define NO_STREAM_ID_FILTER (~0U) -#define LNA_AUTO (~0U) - -struct dtv_cmds_h { - char *name; /* A display name for debugging purposes */ - - __u32 cmd; /* A unique ID */ - - /* Flags */ - __u32 set:1; /* Either a set or get property */ - __u32 buffer:1; /* Does this property use the buffer? */ - __u32 reserved:30; /* Align */ -}; - -struct dtv_property { - __u32 cmd; - __u32 reserved[3]; - union { - __u32 data; - struct { - __u8 data[32]; - __u32 len; - __u32 reserved1[3]; - void *reserved2; - } buffer; - } u; - int result; -} __attribute__ ((packed)); - -/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */ -#define DTV_IOCTL_MAX_MSGS 64 - -struct dtv_properties { - __u32 num; - struct dtv_property *props; -}; - -#define FE_SET_PROPERTY _IOW('o', 82, struct dtv_properties) -#define FE_GET_PROPERTY _IOR('o', 83, struct dtv_properties) - - -/** - * When set, this flag will disable any zigzagging or other "normal" tuning - * behaviour. Additionally, there will be no automatic monitoring of the lock - * status, and hence no frontend events will be generated. If a frontend device - * is closed, this flag will be automatically turned off when the device is - * reopened read-write. - */ -#define FE_TUNE_MODE_ONESHOT 0x01 - - -#define FE_GET_INFO _IOR('o', 61, struct dvb_frontend_info) - -#define FE_DISEQC_RESET_OVERLOAD _IO('o', 62) -#define FE_DISEQC_SEND_MASTER_CMD _IOW('o', 63, struct dvb_diseqc_master_cmd) -#define FE_DISEQC_RECV_SLAVE_REPLY _IOR('o', 64, struct dvb_diseqc_slave_reply) -#define FE_DISEQC_SEND_BURST _IO('o', 65) /* fe_sec_mini_cmd_t */ - -#define FE_SET_TONE _IO('o', 66) /* fe_sec_tone_mode_t */ -#define FE_SET_VOLTAGE _IO('o', 67) /* fe_sec_voltage_t */ -#define FE_ENABLE_HIGH_LNB_VOLTAGE _IO('o', 68) /* int */ - -#define FE_READ_STATUS _IOR('o', 69, fe_status_t) -#define FE_READ_BER _IOR('o', 70, __u32) -#define FE_READ_SIGNAL_STRENGTH _IOR('o', 71, __u16) -#define FE_READ_SNR _IOR('o', 72, __u16) -#define FE_READ_UNCORRECTED_BLOCKS _IOR('o', 73, __u32) - -#define FE_SET_FRONTEND _IOW('o', 76, struct dvb_frontend_parameters) -#define FE_GET_FRONTEND _IOR('o', 77, struct dvb_frontend_parameters) -#define FE_SET_FRONTEND_TUNE_MODE _IO('o', 81) /* unsigned int */ -#define FE_GET_EVENT _IOR('o', 78, struct dvb_frontend_event) - -#define FE_DISHNETWORK_SEND_LEGACY_CMD _IO('o', 80) /* unsigned int */ - -#endif /*_DVBFRONTEND_H_*/ diff --git a/include/linux/dvb/net.h b/include/linux/dvb/net.h deleted file mode 100644 index f451e7eb0b0..00000000000 --- a/include/linux/dvb/net.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * net.h - * - * Copyright (C) 2000 Marcus Metzler - * & Ralph Metzler - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#ifndef _DVBNET_H_ -#define _DVBNET_H_ - -#include - -struct dvb_net_if { - __u16 pid; - __u16 if_num; - __u8 feedtype; -#define DVB_NET_FEEDTYPE_MPE 0 /* multi protocol encapsulation */ -#define DVB_NET_FEEDTYPE_ULE 1 /* ultra lightweight encapsulation */ -}; - - -#define NET_ADD_IF _IOWR('o', 52, struct dvb_net_if) -#define NET_REMOVE_IF _IO('o', 53) -#define NET_GET_IF _IOWR('o', 54, struct dvb_net_if) - - -/* binary compatibility cruft: */ -struct __dvb_net_if_old { - __u16 pid; - __u16 if_num; -}; -#define __NET_ADD_IF_OLD _IOWR('o', 52, struct __dvb_net_if_old) -#define __NET_GET_IF_OLD _IOWR('o', 54, struct __dvb_net_if_old) - - -#endif /*_DVBNET_H_*/ diff --git a/include/linux/dvb/osd.h b/include/linux/dvb/osd.h deleted file mode 100644 index 880e6843583..00000000000 --- a/include/linux/dvb/osd.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * osd.h - * - * Copyright (C) 2001 Ralph Metzler - * & Marcus Metzler - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Lesser Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#ifndef _DVBOSD_H_ -#define _DVBOSD_H_ - -#include - -typedef enum { - // All functions return -2 on "not open" - OSD_Close=1, // () - // Disables OSD and releases the buffers - // returns 0 on success - OSD_Open, // (x0,y0,x1,y1,BitPerPixel[2/4/8](color&0x0F),mix[0..15](color&0xF0)) - // Opens OSD with this size and bit depth - // returns 0 on success, -1 on DRAM allocation error, -2 on "already open" - OSD_Show, // () - // enables OSD mode - // returns 0 on success - OSD_Hide, // () - // disables OSD mode - // returns 0 on success - OSD_Clear, // () - // Sets all pixel to color 0 - // returns 0 on success - OSD_Fill, // (color) - // Sets all pixel to color - // returns 0 on success - OSD_SetColor, // (color,R{x0},G{y0},B{x1},opacity{y1}) - // set palette entry to , and apply - // R,G,B: 0..255 - // R=Red, G=Green, B=Blue - // opacity=0: pixel opacity 0% (only video pixel shows) - // opacity=1..254: pixel opacity as specified in header - // opacity=255: pixel opacity 100% (only OSD pixel shows) - // returns 0 on success, -1 on error - OSD_SetPalette, // (firstcolor{color},lastcolor{x0},data) - // Set a number of entries in the palette - // sets the entries "firstcolor" through "lastcolor" from the array "data" - // data has 4 byte for each color: - // R,G,B, and a opacity value: 0->transparent, 1..254->mix, 255->pixel - OSD_SetTrans, // (transparency{color}) - // Sets transparency of mixed pixel (0..15) - // returns 0 on success - OSD_SetPixel, // (x0,y0,color) - // sets pixel , to color number - // returns 0 on success, -1 on error - OSD_GetPixel, // (x0,y0) - // returns color number of pixel ,, or -1 - OSD_SetRow, // (x0,y0,x1,data) - // fills pixels x0,y through x1,y with the content of data[] - // returns 0 on success, -1 on clipping all pixel (no pixel drawn) - OSD_SetBlock, // (x0,y0,x1,y1,increment{color},data) - // fills pixels x0,y0 through x1,y1 with the content of data[] - // inc contains the width of one line in the data block, - // inc<=0 uses blockwidth as linewidth - // returns 0 on success, -1 on clipping all pixel - OSD_FillRow, // (x0,y0,x1,color) - // fills pixels x0,y through x1,y with the color - // returns 0 on success, -1 on clipping all pixel - OSD_FillBlock, // (x0,y0,x1,y1,color) - // fills pixels x0,y0 through x1,y1 with the color - // returns 0 on success, -1 on clipping all pixel - OSD_Line, // (x0,y0,x1,y1,color) - // draw a line from x0,y0 to x1,y1 with the color - // returns 0 on success - OSD_Query, // (x0,y0,x1,y1,xasp{color}}), yasp=11 - // fills parameters with the picture dimensions and the pixel aspect ratio - // returns 0 on success - OSD_Test, // () - // draws a test picture. for debugging purposes only - // returns 0 on success -// TODO: remove "test" in final version - OSD_Text, // (x0,y0,size,color,text) - OSD_SetWindow, // (x0) set window with number 0 - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#ifndef _DVBVERSION_H_ -#define _DVBVERSION_H_ - -#define DVB_API_VERSION 5 -#define DVB_API_VERSION_MINOR 9 - -#endif /*_DVBVERSION_H_*/ diff --git a/include/linux/dvb/video.h b/include/linux/dvb/video.h index 1d750c0fd86..85c20d92569 100644 --- a/include/linux/dvb/video.h +++ b/include/linux/dvb/video.h @@ -20,257 +20,10 @@ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * */ - #ifndef _DVBVIDEO_H_ #define _DVBVIDEO_H_ -#include -#ifdef __KERNEL__ #include -#else -#include -#include -#endif - -typedef enum { - VIDEO_FORMAT_4_3, /* Select 4:3 format */ - VIDEO_FORMAT_16_9, /* Select 16:9 format. */ - VIDEO_FORMAT_221_1 /* 2.21:1 */ -} video_format_t; - - -typedef enum { - VIDEO_SYSTEM_PAL, - VIDEO_SYSTEM_NTSC, - VIDEO_SYSTEM_PALN, - VIDEO_SYSTEM_PALNc, - VIDEO_SYSTEM_PALM, - VIDEO_SYSTEM_NTSC60, - VIDEO_SYSTEM_PAL60, - VIDEO_SYSTEM_PALM60 -} video_system_t; - - -typedef enum { - VIDEO_PAN_SCAN, /* use pan and scan format */ - VIDEO_LETTER_BOX, /* use letterbox format */ - VIDEO_CENTER_CUT_OUT /* use center cut out format */ -} video_displayformat_t; - -typedef struct { - int w; - int h; - video_format_t aspect_ratio; -} video_size_t; - -typedef enum { - VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */ - VIDEO_SOURCE_MEMORY /* If this source is selected, the stream - comes from the user through the write - system call */ -} video_stream_source_t; - - -typedef enum { - VIDEO_STOPPED, /* Video is stopped */ - VIDEO_PLAYING, /* Video is currently playing */ - VIDEO_FREEZED /* Video is freezed */ -} video_play_state_t; - - -/* Decoder commands */ -#define VIDEO_CMD_PLAY (0) -#define VIDEO_CMD_STOP (1) -#define VIDEO_CMD_FREEZE (2) -#define VIDEO_CMD_CONTINUE (3) - -/* Flags for VIDEO_CMD_FREEZE */ -#define VIDEO_CMD_FREEZE_TO_BLACK (1 << 0) - -/* Flags for VIDEO_CMD_STOP */ -#define VIDEO_CMD_STOP_TO_BLACK (1 << 0) -#define VIDEO_CMD_STOP_IMMEDIATELY (1 << 1) - -/* Play input formats: */ -/* The decoder has no special format requirements */ -#define VIDEO_PLAY_FMT_NONE (0) -/* The decoder requires full GOPs */ -#define VIDEO_PLAY_FMT_GOP (1) - -/* The structure must be zeroed before use by the application - This ensures it can be extended safely in the future. */ -struct video_command { - __u32 cmd; - __u32 flags; - union { - struct { - __u64 pts; - } stop; - - struct { - /* 0 or 1000 specifies normal speed, - 1 specifies forward single stepping, - -1 specifies backward single stepping, - >1: playback at speed/1000 of the normal speed, - <-1: reverse playback at (-speed/1000) of the normal speed. */ - __s32 speed; - __u32 format; - } play; - - struct { - __u32 data[16]; - } raw; - }; -}; - -/* FIELD_UNKNOWN can be used if the hardware does not know whether - the Vsync is for an odd, even or progressive (i.e. non-interlaced) - field. */ -#define VIDEO_VSYNC_FIELD_UNKNOWN (0) -#define VIDEO_VSYNC_FIELD_ODD (1) -#define VIDEO_VSYNC_FIELD_EVEN (2) -#define VIDEO_VSYNC_FIELD_PROGRESSIVE (3) - -struct video_event { - __s32 type; -#define VIDEO_EVENT_SIZE_CHANGED 1 -#define VIDEO_EVENT_FRAME_RATE_CHANGED 2 -#define VIDEO_EVENT_DECODER_STOPPED 3 -#define VIDEO_EVENT_VSYNC 4 - __kernel_time_t timestamp; - union { - video_size_t size; - unsigned int frame_rate; /* in frames per 1000sec */ - unsigned char vsync_field; /* unknown/odd/even/progressive */ - } u; -}; - - -struct video_status { - int video_blank; /* blank video on freeze? */ - video_play_state_t play_state; /* current state of playback */ - video_stream_source_t stream_source; /* current source (demux/memory) */ - video_format_t video_format; /* current aspect ratio of stream*/ - video_displayformat_t display_format;/* selected cropping mode */ -}; - - -struct video_still_picture { - char __user *iFrame; /* pointer to a single iframe in memory */ - __s32 size; -}; - - -typedef -struct video_highlight { - int active; /* 1=show highlight, 0=hide highlight */ - __u8 contrast1; /* 7- 4 Pattern pixel contrast */ - /* 3- 0 Background pixel contrast */ - __u8 contrast2; /* 7- 4 Emphasis pixel-2 contrast */ - /* 3- 0 Emphasis pixel-1 contrast */ - __u8 color1; /* 7- 4 Pattern pixel color */ - /* 3- 0 Background pixel color */ - __u8 color2; /* 7- 4 Emphasis pixel-2 color */ - /* 3- 0 Emphasis pixel-1 color */ - __u32 ypos; /* 23-22 auto action mode */ - /* 21-12 start y */ - /* 9- 0 end y */ - __u32 xpos; /* 23-22 button color number */ - /* 21-12 start x */ - /* 9- 0 end x */ -} video_highlight_t; - - -typedef struct video_spu { - int active; - int stream_id; -} video_spu_t; - - -typedef struct video_spu_palette { /* SPU Palette information */ - int length; - __u8 __user *palette; -} video_spu_palette_t; - - -typedef struct video_navi_pack { - int length; /* 0 ... 1024 */ - __u8 data[1024]; -} video_navi_pack_t; - - -typedef __u16 video_attributes_t; -/* bits: descr. */ -/* 15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) */ -/* 13-12 TV system (0=525/60, 1=625/50) */ -/* 11-10 Aspect ratio (0=4:3, 3=16:9) */ -/* 9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca */ -/* 7 line 21-1 data present in GOP (1=yes, 0=no) */ -/* 6 line 21-2 data present in GOP (1=yes, 0=no) */ -/* 5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 */ -/* 2 source letterboxed (1=yes, 0=no) */ -/* 0 film/camera mode (0=camera, 1=film (625/50 only)) */ - - -/* bit definitions for capabilities: */ -/* can the hardware decode MPEG1 and/or MPEG2? */ -#define VIDEO_CAP_MPEG1 1 -#define VIDEO_CAP_MPEG2 2 -/* can you send a system and/or program stream to video device? - (you still have to open the video and the audio device but only - send the stream to the video device) */ -#define VIDEO_CAP_SYS 4 -#define VIDEO_CAP_PROG 8 -/* can the driver also handle SPU, NAVI and CSS encoded data? - (CSS API is not present yet) */ -#define VIDEO_CAP_SPU 16 -#define VIDEO_CAP_NAVI 32 -#define VIDEO_CAP_CSS 64 - - -#define VIDEO_STOP _IO('o', 21) -#define VIDEO_PLAY _IO('o', 22) -#define VIDEO_FREEZE _IO('o', 23) -#define VIDEO_CONTINUE _IO('o', 24) -#define VIDEO_SELECT_SOURCE _IO('o', 25) -#define VIDEO_SET_BLANK _IO('o', 26) -#define VIDEO_GET_STATUS _IOR('o', 27, struct video_status) -#define VIDEO_GET_EVENT _IOR('o', 28, struct video_event) -#define VIDEO_SET_DISPLAY_FORMAT _IO('o', 29) -#define VIDEO_STILLPICTURE _IOW('o', 30, struct video_still_picture) -#define VIDEO_FAST_FORWARD _IO('o', 31) -#define VIDEO_SLOWMOTION _IO('o', 32) -#define VIDEO_GET_CAPABILITIES _IOR('o', 33, unsigned int) -#define VIDEO_CLEAR_BUFFER _IO('o', 34) -#define VIDEO_SET_ID _IO('o', 35) -#define VIDEO_SET_STREAMTYPE _IO('o', 36) -#define VIDEO_SET_FORMAT _IO('o', 37) -#define VIDEO_SET_SYSTEM _IO('o', 38) -#define VIDEO_SET_HIGHLIGHT _IOW('o', 39, video_highlight_t) -#define VIDEO_SET_SPU _IOW('o', 50, video_spu_t) -#define VIDEO_SET_SPU_PALETTE _IOW('o', 51, video_spu_palette_t) -#define VIDEO_GET_NAVI _IOR('o', 52, video_navi_pack_t) -#define VIDEO_SET_ATTRIBUTES _IO('o', 53) -#define VIDEO_GET_SIZE _IOR('o', 55, video_size_t) -#define VIDEO_GET_FRAME_RATE _IOR('o', 56, unsigned int) - -/** - * VIDEO_GET_PTS - * - * Read the 33 bit presentation time stamp as defined - * in ITU T-REC-H.222.0 / ISO/IEC 13818-1. - * - * The PTS should belong to the currently played - * frame if possible, but may also be a value close to it - * like the PTS of the last decoded frame or the last PTS - * extracted by the PES parser. - */ -#define VIDEO_GET_PTS _IOR('o', 57, __u64) - -/* Read the number of displayed frames since the decoder was started */ -#define VIDEO_GET_FRAME_COUNT _IOR('o', 58, __u64) - -#define VIDEO_COMMAND _IOWR('o', 59, struct video_command) -#define VIDEO_TRY_COMMAND _IOWR('o', 60, struct video_command) +#include #endif /*_DVBVIDEO_H_*/ diff --git a/include/uapi/linux/dvb/Kbuild b/include/uapi/linux/dvb/Kbuild index aafaa5aa54d..d40942cfc62 100644 --- a/include/uapi/linux/dvb/Kbuild +++ b/include/uapi/linux/dvb/Kbuild @@ -1 +1,9 @@ # UAPI Header export list +header-y += audio.h +header-y += ca.h +header-y += dmx.h +header-y += frontend.h +header-y += net.h +header-y += osd.h +header-y += version.h +header-y += video.h diff --git a/include/uapi/linux/dvb/audio.h b/include/uapi/linux/dvb/audio.h new file mode 100644 index 00000000000..d47bccd604e --- /dev/null +++ b/include/uapi/linux/dvb/audio.h @@ -0,0 +1,135 @@ +/* + * audio.h + * + * Copyright (C) 2000 Ralph Metzler + * & Marcus Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Lesser Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _DVBAUDIO_H_ +#define _DVBAUDIO_H_ + +#include + +typedef enum { + AUDIO_SOURCE_DEMUX, /* Select the demux as the main source */ + AUDIO_SOURCE_MEMORY /* Select internal memory as the main source */ +} audio_stream_source_t; + + +typedef enum { + AUDIO_STOPPED, /* Device is stopped */ + AUDIO_PLAYING, /* Device is currently playing */ + AUDIO_PAUSED /* Device is paused */ +} audio_play_state_t; + + +typedef enum { + AUDIO_STEREO, + AUDIO_MONO_LEFT, + AUDIO_MONO_RIGHT, + AUDIO_MONO, + AUDIO_STEREO_SWAPPED +} audio_channel_select_t; + + +typedef struct audio_mixer { + unsigned int volume_left; + unsigned int volume_right; + // what else do we need? bass, pass-through, ... +} audio_mixer_t; + + +typedef struct audio_status { + int AV_sync_state; /* sync audio and video? */ + int mute_state; /* audio is muted */ + audio_play_state_t play_state; /* current playback state */ + audio_stream_source_t stream_source; /* current stream source */ + audio_channel_select_t channel_select; /* currently selected channel */ + int bypass_mode; /* pass on audio data to */ + audio_mixer_t mixer_state; /* current mixer state */ +} audio_status_t; /* separate decoder hardware */ + + +typedef +struct audio_karaoke { /* if Vocal1 or Vocal2 are non-zero, they get mixed */ + int vocal1; /* into left and right t at 70% each */ + int vocal2; /* if both, Vocal1 and Vocal2 are non-zero, Vocal1 gets*/ + int melody; /* mixed into the left channel and */ + /* Vocal2 into the right channel at 100% each. */ + /* if Melody is non-zero, the melody channel gets mixed*/ +} audio_karaoke_t; /* into left and right */ + + +typedef __u16 audio_attributes_t; +/* bits: descr. */ +/* 15-13 audio coding mode (0=ac3, 2=mpeg1, 3=mpeg2ext, 4=LPCM, 6=DTS, */ +/* 12 multichannel extension */ +/* 11-10 audio type (0=not spec, 1=language included) */ +/* 9- 8 audio application mode (0=not spec, 1=karaoke, 2=surround) */ +/* 7- 6 Quantization / DRC (mpeg audio: 1=DRC exists)(lpcm: 0=16bit, */ +/* 5- 4 Sample frequency fs (0=48kHz, 1=96kHz) */ +/* 2- 0 number of audio channels (n+1 channels) */ + + +/* for GET_CAPABILITIES and SET_FORMAT, the latter should only set one bit */ +#define AUDIO_CAP_DTS 1 +#define AUDIO_CAP_LPCM 2 +#define AUDIO_CAP_MP1 4 +#define AUDIO_CAP_MP2 8 +#define AUDIO_CAP_MP3 16 +#define AUDIO_CAP_AAC 32 +#define AUDIO_CAP_OGG 64 +#define AUDIO_CAP_SDDS 128 +#define AUDIO_CAP_AC3 256 + +#define AUDIO_STOP _IO('o', 1) +#define AUDIO_PLAY _IO('o', 2) +#define AUDIO_PAUSE _IO('o', 3) +#define AUDIO_CONTINUE _IO('o', 4) +#define AUDIO_SELECT_SOURCE _IO('o', 5) +#define AUDIO_SET_MUTE _IO('o', 6) +#define AUDIO_SET_AV_SYNC _IO('o', 7) +#define AUDIO_SET_BYPASS_MODE _IO('o', 8) +#define AUDIO_CHANNEL_SELECT _IO('o', 9) +#define AUDIO_GET_STATUS _IOR('o', 10, audio_status_t) + +#define AUDIO_GET_CAPABILITIES _IOR('o', 11, unsigned int) +#define AUDIO_CLEAR_BUFFER _IO('o', 12) +#define AUDIO_SET_ID _IO('o', 13) +#define AUDIO_SET_MIXER _IOW('o', 14, audio_mixer_t) +#define AUDIO_SET_STREAMTYPE _IO('o', 15) +#define AUDIO_SET_EXT_ID _IO('o', 16) +#define AUDIO_SET_ATTRIBUTES _IOW('o', 17, audio_attributes_t) +#define AUDIO_SET_KARAOKE _IOW('o', 18, audio_karaoke_t) + +/** + * AUDIO_GET_PTS + * + * Read the 33 bit presentation time stamp as defined + * in ITU T-REC-H.222.0 / ISO/IEC 13818-1. + * + * The PTS should belong to the currently played + * frame if possible, but may also be a value close to it + * like the PTS of the last decoded frame or the last PTS + * extracted by the PES parser. + */ +#define AUDIO_GET_PTS _IOR('o', 19, __u64) +#define AUDIO_BILINGUAL_CHANNEL_SELECT _IO('o', 20) + +#endif /* _DVBAUDIO_H_ */ diff --git a/include/uapi/linux/dvb/ca.h b/include/uapi/linux/dvb/ca.h new file mode 100644 index 00000000000..c18537f3e44 --- /dev/null +++ b/include/uapi/linux/dvb/ca.h @@ -0,0 +1,90 @@ +/* + * ca.h + * + * Copyright (C) 2000 Ralph Metzler + * & Marcus Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Lesser Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _DVBCA_H_ +#define _DVBCA_H_ + +/* slot interface types and info */ + +typedef struct ca_slot_info { + int num; /* slot number */ + + int type; /* CA interface this slot supports */ +#define CA_CI 1 /* CI high level interface */ +#define CA_CI_LINK 2 /* CI link layer level interface */ +#define CA_CI_PHYS 4 /* CI physical layer level interface */ +#define CA_DESCR 8 /* built-in descrambler */ +#define CA_SC 128 /* simple smart card interface */ + + unsigned int flags; +#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */ +#define CA_CI_MODULE_READY 2 +} ca_slot_info_t; + + +/* descrambler types and info */ + +typedef struct ca_descr_info { + unsigned int num; /* number of available descramblers (keys) */ + unsigned int type; /* type of supported scrambling system */ +#define CA_ECD 1 +#define CA_NDS 2 +#define CA_DSS 4 +} ca_descr_info_t; + +typedef struct ca_caps { + unsigned int slot_num; /* total number of CA card and module slots */ + unsigned int slot_type; /* OR of all supported types */ + unsigned int descr_num; /* total number of descrambler slots (keys) */ + unsigned int descr_type; /* OR of all supported types */ +} ca_caps_t; + +/* a message to/from a CI-CAM */ +typedef struct ca_msg { + unsigned int index; + unsigned int type; + unsigned int length; + unsigned char msg[256]; +} ca_msg_t; + +typedef struct ca_descr { + unsigned int index; + unsigned int parity; /* 0 == even, 1 == odd */ + unsigned char cw[8]; +} ca_descr_t; + +typedef struct ca_pid { + unsigned int pid; + int index; /* -1 == disable*/ +} ca_pid_t; + +#define CA_RESET _IO('o', 128) +#define CA_GET_CAP _IOR('o', 129, ca_caps_t) +#define CA_GET_SLOT_INFO _IOR('o', 130, ca_slot_info_t) +#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t) +#define CA_GET_MSG _IOR('o', 132, ca_msg_t) +#define CA_SEND_MSG _IOW('o', 133, ca_msg_t) +#define CA_SET_DESCR _IOW('o', 134, ca_descr_t) +#define CA_SET_PID _IOW('o', 135, ca_pid_t) + +#endif diff --git a/include/uapi/linux/dvb/dmx.h b/include/uapi/linux/dvb/dmx.h new file mode 100644 index 00000000000..b2a9ad8cafd --- /dev/null +++ b/include/uapi/linux/dvb/dmx.h @@ -0,0 +1,155 @@ +/* + * dmx.h + * + * Copyright (C) 2000 Marcus Metzler + * & Ralph Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _UAPI_DVBDMX_H_ +#define _UAPI_DVBDMX_H_ + +#include +#ifndef __KERNEL__ +#include +#endif + + +#define DMX_FILTER_SIZE 16 + +typedef enum +{ + DMX_OUT_DECODER, /* Streaming directly to decoder. */ + DMX_OUT_TAP, /* Output going to a memory buffer */ + /* (to be retrieved via the read command).*/ + DMX_OUT_TS_TAP, /* Output multiplexed into a new TS */ + /* (to be retrieved by reading from the */ + /* logical DVR device). */ + DMX_OUT_TSDEMUX_TAP /* Like TS_TAP but retrieved from the DMX device */ +} dmx_output_t; + + +typedef enum +{ + DMX_IN_FRONTEND, /* Input from a front-end device. */ + DMX_IN_DVR /* Input from the logical DVR device. */ +} dmx_input_t; + + +typedef enum +{ + DMX_PES_AUDIO0, + DMX_PES_VIDEO0, + DMX_PES_TELETEXT0, + DMX_PES_SUBTITLE0, + DMX_PES_PCR0, + + DMX_PES_AUDIO1, + DMX_PES_VIDEO1, + DMX_PES_TELETEXT1, + DMX_PES_SUBTITLE1, + DMX_PES_PCR1, + + DMX_PES_AUDIO2, + DMX_PES_VIDEO2, + DMX_PES_TELETEXT2, + DMX_PES_SUBTITLE2, + DMX_PES_PCR2, + + DMX_PES_AUDIO3, + DMX_PES_VIDEO3, + DMX_PES_TELETEXT3, + DMX_PES_SUBTITLE3, + DMX_PES_PCR3, + + DMX_PES_OTHER +} dmx_pes_type_t; + +#define DMX_PES_AUDIO DMX_PES_AUDIO0 +#define DMX_PES_VIDEO DMX_PES_VIDEO0 +#define DMX_PES_TELETEXT DMX_PES_TELETEXT0 +#define DMX_PES_SUBTITLE DMX_PES_SUBTITLE0 +#define DMX_PES_PCR DMX_PES_PCR0 + + +typedef struct dmx_filter +{ + __u8 filter[DMX_FILTER_SIZE]; + __u8 mask[DMX_FILTER_SIZE]; + __u8 mode[DMX_FILTER_SIZE]; +} dmx_filter_t; + + +struct dmx_sct_filter_params +{ + __u16 pid; + dmx_filter_t filter; + __u32 timeout; + __u32 flags; +#define DMX_CHECK_CRC 1 +#define DMX_ONESHOT 2 +#define DMX_IMMEDIATE_START 4 +#define DMX_KERNEL_CLIENT 0x8000 +}; + + +struct dmx_pes_filter_params +{ + __u16 pid; + dmx_input_t input; + dmx_output_t output; + dmx_pes_type_t pes_type; + __u32 flags; +}; + +typedef struct dmx_caps { + __u32 caps; + int num_decoders; +} dmx_caps_t; + +typedef enum { + DMX_SOURCE_FRONT0 = 0, + DMX_SOURCE_FRONT1, + DMX_SOURCE_FRONT2, + DMX_SOURCE_FRONT3, + DMX_SOURCE_DVR0 = 16, + DMX_SOURCE_DVR1, + DMX_SOURCE_DVR2, + DMX_SOURCE_DVR3 +} dmx_source_t; + +struct dmx_stc { + unsigned int num; /* input : which STC? 0..N */ + unsigned int base; /* output: divisor for stc to get 90 kHz clock */ + __u64 stc; /* output: stc in 'base'*90 kHz units */ +}; + + +#define DMX_START _IO('o', 41) +#define DMX_STOP _IO('o', 42) +#define DMX_SET_FILTER _IOW('o', 43, struct dmx_sct_filter_params) +#define DMX_SET_PES_FILTER _IOW('o', 44, struct dmx_pes_filter_params) +#define DMX_SET_BUFFER_SIZE _IO('o', 45) +#define DMX_GET_PES_PIDS _IOR('o', 47, __u16[5]) +#define DMX_GET_CAPS _IOR('o', 48, dmx_caps_t) +#define DMX_SET_SOURCE _IOW('o', 49, dmx_source_t) +#define DMX_GET_STC _IOWR('o', 50, struct dmx_stc) +#define DMX_ADD_PID _IOW('o', 51, __u16) +#define DMX_REMOVE_PID _IOW('o', 52, __u16) + +#endif /* _UAPI_DVBDMX_H_ */ diff --git a/include/uapi/linux/dvb/frontend.h b/include/uapi/linux/dvb/frontend.h new file mode 100644 index 00000000000..c12d452cb40 --- /dev/null +++ b/include/uapi/linux/dvb/frontend.h @@ -0,0 +1,516 @@ +/* + * frontend.h + * + * Copyright (C) 2000 Marcus Metzler + * Ralph Metzler + * Holger Waechtler + * Andre Draszik + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _DVBFRONTEND_H_ +#define _DVBFRONTEND_H_ + +#include + +typedef enum fe_type { + FE_QPSK, + FE_QAM, + FE_OFDM, + FE_ATSC +} fe_type_t; + + +typedef enum fe_caps { + FE_IS_STUPID = 0, + FE_CAN_INVERSION_AUTO = 0x1, + FE_CAN_FEC_1_2 = 0x2, + FE_CAN_FEC_2_3 = 0x4, + FE_CAN_FEC_3_4 = 0x8, + FE_CAN_FEC_4_5 = 0x10, + FE_CAN_FEC_5_6 = 0x20, + FE_CAN_FEC_6_7 = 0x40, + FE_CAN_FEC_7_8 = 0x80, + FE_CAN_FEC_8_9 = 0x100, + FE_CAN_FEC_AUTO = 0x200, + FE_CAN_QPSK = 0x400, + FE_CAN_QAM_16 = 0x800, + FE_CAN_QAM_32 = 0x1000, + FE_CAN_QAM_64 = 0x2000, + FE_CAN_QAM_128 = 0x4000, + FE_CAN_QAM_256 = 0x8000, + FE_CAN_QAM_AUTO = 0x10000, + FE_CAN_TRANSMISSION_MODE_AUTO = 0x20000, + FE_CAN_BANDWIDTH_AUTO = 0x40000, + FE_CAN_GUARD_INTERVAL_AUTO = 0x80000, + FE_CAN_HIERARCHY_AUTO = 0x100000, + FE_CAN_8VSB = 0x200000, + FE_CAN_16VSB = 0x400000, + FE_HAS_EXTENDED_CAPS = 0x800000, /* We need more bitspace for newer APIs, indicate this. */ + FE_CAN_MULTISTREAM = 0x4000000, /* frontend supports multistream filtering */ + FE_CAN_TURBO_FEC = 0x8000000, /* frontend supports "turbo fec modulation" */ + FE_CAN_2G_MODULATION = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */ + FE_NEEDS_BENDING = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */ + FE_CAN_RECOVER = 0x40000000, /* frontend can recover from a cable unplug automatically */ + FE_CAN_MUTE_TS = 0x80000000 /* frontend can stop spurious TS data output */ +} fe_caps_t; + + +struct dvb_frontend_info { + char name[128]; + fe_type_t type; /* DEPRECATED. Use DTV_ENUM_DELSYS instead */ + __u32 frequency_min; + __u32 frequency_max; + __u32 frequency_stepsize; + __u32 frequency_tolerance; + __u32 symbol_rate_min; + __u32 symbol_rate_max; + __u32 symbol_rate_tolerance; /* ppm */ + __u32 notifier_delay; /* DEPRECATED */ + fe_caps_t caps; +}; + + +/** + * Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for + * the meaning of this struct... + */ +struct dvb_diseqc_master_cmd { + __u8 msg [6]; /* { framing, address, command, data [3] } */ + __u8 msg_len; /* valid values are 3...6 */ +}; + + +struct dvb_diseqc_slave_reply { + __u8 msg [4]; /* { framing, data [3] } */ + __u8 msg_len; /* valid values are 0...4, 0 means no msg */ + int timeout; /* return from ioctl after timeout ms with */ +}; /* errorcode when no message was received */ + + +typedef enum fe_sec_voltage { + SEC_VOLTAGE_13, + SEC_VOLTAGE_18, + SEC_VOLTAGE_OFF +} fe_sec_voltage_t; + + +typedef enum fe_sec_tone_mode { + SEC_TONE_ON, + SEC_TONE_OFF +} fe_sec_tone_mode_t; + + +typedef enum fe_sec_mini_cmd { + SEC_MINI_A, + SEC_MINI_B +} fe_sec_mini_cmd_t; + + +/** + * enum fe_status - enumerates the possible frontend status + * @FE_HAS_SIGNAL: found something above the noise level + * @FE_HAS_CARRIER: found a DVB signal + * @FE_HAS_VITERBI: FEC is stable + * @FE_HAS_SYNC: found sync bytes + * @FE_HAS_LOCK: everything's working + * @FE_TIMEDOUT: no lock within the last ~2 seconds + * @FE_REINIT: frontend was reinitialized, application is recommended + * to reset DiSEqC, tone and parameters + */ + +typedef enum fe_status { + FE_HAS_SIGNAL = 0x01, + FE_HAS_CARRIER = 0x02, + FE_HAS_VITERBI = 0x04, + FE_HAS_SYNC = 0x08, + FE_HAS_LOCK = 0x10, + FE_TIMEDOUT = 0x20, + FE_REINIT = 0x40, +} fe_status_t; + +typedef enum fe_spectral_inversion { + INVERSION_OFF, + INVERSION_ON, + INVERSION_AUTO +} fe_spectral_inversion_t; + + +typedef enum fe_code_rate { + FEC_NONE = 0, + FEC_1_2, + FEC_2_3, + FEC_3_4, + FEC_4_5, + FEC_5_6, + FEC_6_7, + FEC_7_8, + FEC_8_9, + FEC_AUTO, + FEC_3_5, + FEC_9_10, + FEC_2_5, +} fe_code_rate_t; + + +typedef enum fe_modulation { + QPSK, + QAM_16, + QAM_32, + QAM_64, + QAM_128, + QAM_256, + QAM_AUTO, + VSB_8, + VSB_16, + PSK_8, + APSK_16, + APSK_32, + DQPSK, + QAM_4_NR, +} fe_modulation_t; + +typedef enum fe_transmit_mode { + TRANSMISSION_MODE_2K, + TRANSMISSION_MODE_8K, + TRANSMISSION_MODE_AUTO, + TRANSMISSION_MODE_4K, + TRANSMISSION_MODE_1K, + TRANSMISSION_MODE_16K, + TRANSMISSION_MODE_32K, + TRANSMISSION_MODE_C1, + TRANSMISSION_MODE_C3780, +} fe_transmit_mode_t; + +#if defined(__DVB_CORE__) || !defined (__KERNEL__) +typedef enum fe_bandwidth { + BANDWIDTH_8_MHZ, + BANDWIDTH_7_MHZ, + BANDWIDTH_6_MHZ, + BANDWIDTH_AUTO, + BANDWIDTH_5_MHZ, + BANDWIDTH_10_MHZ, + BANDWIDTH_1_712_MHZ, +} fe_bandwidth_t; +#endif + +typedef enum fe_guard_interval { + GUARD_INTERVAL_1_32, + GUARD_INTERVAL_1_16, + GUARD_INTERVAL_1_8, + GUARD_INTERVAL_1_4, + GUARD_INTERVAL_AUTO, + GUARD_INTERVAL_1_128, + GUARD_INTERVAL_19_128, + GUARD_INTERVAL_19_256, + GUARD_INTERVAL_PN420, + GUARD_INTERVAL_PN595, + GUARD_INTERVAL_PN945, +} fe_guard_interval_t; + + +typedef enum fe_hierarchy { + HIERARCHY_NONE, + HIERARCHY_1, + HIERARCHY_2, + HIERARCHY_4, + HIERARCHY_AUTO +} fe_hierarchy_t; + +enum fe_interleaving { + INTERLEAVING_NONE, + INTERLEAVING_AUTO, + INTERLEAVING_240, + INTERLEAVING_720, +}; + +#if defined(__DVB_CORE__) || !defined (__KERNEL__) +struct dvb_qpsk_parameters { + __u32 symbol_rate; /* symbol rate in Symbols per second */ + fe_code_rate_t fec_inner; /* forward error correction (see above) */ +}; + +struct dvb_qam_parameters { + __u32 symbol_rate; /* symbol rate in Symbols per second */ + fe_code_rate_t fec_inner; /* forward error correction (see above) */ + fe_modulation_t modulation; /* modulation type (see above) */ +}; + +struct dvb_vsb_parameters { + fe_modulation_t modulation; /* modulation type (see above) */ +}; + +struct dvb_ofdm_parameters { + fe_bandwidth_t bandwidth; + fe_code_rate_t code_rate_HP; /* high priority stream code rate */ + fe_code_rate_t code_rate_LP; /* low priority stream code rate */ + fe_modulation_t constellation; /* modulation type (see above) */ + fe_transmit_mode_t transmission_mode; + fe_guard_interval_t guard_interval; + fe_hierarchy_t hierarchy_information; +}; + + +struct dvb_frontend_parameters { + __u32 frequency; /* (absolute) frequency in Hz for QAM/OFDM/ATSC */ + /* intermediate frequency in kHz for QPSK */ + fe_spectral_inversion_t inversion; + union { + struct dvb_qpsk_parameters qpsk; + struct dvb_qam_parameters qam; + struct dvb_ofdm_parameters ofdm; + struct dvb_vsb_parameters vsb; + } u; +}; + +struct dvb_frontend_event { + fe_status_t status; + struct dvb_frontend_parameters parameters; +}; +#endif + +/* S2API Commands */ +#define DTV_UNDEFINED 0 +#define DTV_TUNE 1 +#define DTV_CLEAR 2 +#define DTV_FREQUENCY 3 +#define DTV_MODULATION 4 +#define DTV_BANDWIDTH_HZ 5 +#define DTV_INVERSION 6 +#define DTV_DISEQC_MASTER 7 +#define DTV_SYMBOL_RATE 8 +#define DTV_INNER_FEC 9 +#define DTV_VOLTAGE 10 +#define DTV_TONE 11 +#define DTV_PILOT 12 +#define DTV_ROLLOFF 13 +#define DTV_DISEQC_SLAVE_REPLY 14 + +/* Basic enumeration set for querying unlimited capabilities */ +#define DTV_FE_CAPABILITY_COUNT 15 +#define DTV_FE_CAPABILITY 16 +#define DTV_DELIVERY_SYSTEM 17 + +/* ISDB-T and ISDB-Tsb */ +#define DTV_ISDBT_PARTIAL_RECEPTION 18 +#define DTV_ISDBT_SOUND_BROADCASTING 19 + +#define DTV_ISDBT_SB_SUBCHANNEL_ID 20 +#define DTV_ISDBT_SB_SEGMENT_IDX 21 +#define DTV_ISDBT_SB_SEGMENT_COUNT 22 + +#define DTV_ISDBT_LAYERA_FEC 23 +#define DTV_ISDBT_LAYERA_MODULATION 24 +#define DTV_ISDBT_LAYERA_SEGMENT_COUNT 25 +#define DTV_ISDBT_LAYERA_TIME_INTERLEAVING 26 + +#define DTV_ISDBT_LAYERB_FEC 27 +#define DTV_ISDBT_LAYERB_MODULATION 28 +#define DTV_ISDBT_LAYERB_SEGMENT_COUNT 29 +#define DTV_ISDBT_LAYERB_TIME_INTERLEAVING 30 + +#define DTV_ISDBT_LAYERC_FEC 31 +#define DTV_ISDBT_LAYERC_MODULATION 32 +#define DTV_ISDBT_LAYERC_SEGMENT_COUNT 33 +#define DTV_ISDBT_LAYERC_TIME_INTERLEAVING 34 + +#define DTV_API_VERSION 35 + +#define DTV_CODE_RATE_HP 36 +#define DTV_CODE_RATE_LP 37 +#define DTV_GUARD_INTERVAL 38 +#define DTV_TRANSMISSION_MODE 39 +#define DTV_HIERARCHY 40 + +#define DTV_ISDBT_LAYER_ENABLED 41 + +#define DTV_STREAM_ID 42 +#define DTV_ISDBS_TS_ID_LEGACY DTV_STREAM_ID +#define DTV_DVBT2_PLP_ID_LEGACY 43 + +#define DTV_ENUM_DELSYS 44 + +/* ATSC-MH */ +#define DTV_ATSCMH_FIC_VER 45 +#define DTV_ATSCMH_PARADE_ID 46 +#define DTV_ATSCMH_NOG 47 +#define DTV_ATSCMH_TNOG 48 +#define DTV_ATSCMH_SGN 49 +#define DTV_ATSCMH_PRC 50 +#define DTV_ATSCMH_RS_FRAME_MODE 51 +#define DTV_ATSCMH_RS_FRAME_ENSEMBLE 52 +#define DTV_ATSCMH_RS_CODE_MODE_PRI 53 +#define DTV_ATSCMH_RS_CODE_MODE_SEC 54 +#define DTV_ATSCMH_SCCC_BLOCK_MODE 55 +#define DTV_ATSCMH_SCCC_CODE_MODE_A 56 +#define DTV_ATSCMH_SCCC_CODE_MODE_B 57 +#define DTV_ATSCMH_SCCC_CODE_MODE_C 58 +#define DTV_ATSCMH_SCCC_CODE_MODE_D 59 + +#define DTV_INTERLEAVING 60 +#define DTV_LNA 61 + +#define DTV_MAX_COMMAND DTV_LNA + +typedef enum fe_pilot { + PILOT_ON, + PILOT_OFF, + PILOT_AUTO, +} fe_pilot_t; + +typedef enum fe_rolloff { + ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */ + ROLLOFF_20, + ROLLOFF_25, + ROLLOFF_AUTO, +} fe_rolloff_t; + +typedef enum fe_delivery_system { + SYS_UNDEFINED, + SYS_DVBC_ANNEX_A, + SYS_DVBC_ANNEX_B, + SYS_DVBT, + SYS_DSS, + SYS_DVBS, + SYS_DVBS2, + SYS_DVBH, + SYS_ISDBT, + SYS_ISDBS, + SYS_ISDBC, + SYS_ATSC, + SYS_ATSCMH, + SYS_DTMB, + SYS_CMMB, + SYS_DAB, + SYS_DVBT2, + SYS_TURBO, + SYS_DVBC_ANNEX_C, +} fe_delivery_system_t; + +/* backward compatibility */ +#define SYS_DVBC_ANNEX_AC SYS_DVBC_ANNEX_A +#define SYS_DMBTH SYS_DTMB /* DMB-TH is legacy name, use DTMB instead */ + +/* ATSC-MH */ + +enum atscmh_sccc_block_mode { + ATSCMH_SCCC_BLK_SEP = 0, + ATSCMH_SCCC_BLK_COMB = 1, + ATSCMH_SCCC_BLK_RES = 2, +}; + +enum atscmh_sccc_code_mode { + ATSCMH_SCCC_CODE_HLF = 0, + ATSCMH_SCCC_CODE_QTR = 1, + ATSCMH_SCCC_CODE_RES = 2, +}; + +enum atscmh_rs_frame_ensemble { + ATSCMH_RSFRAME_ENS_PRI = 0, + ATSCMH_RSFRAME_ENS_SEC = 1, +}; + +enum atscmh_rs_frame_mode { + ATSCMH_RSFRAME_PRI_ONLY = 0, + ATSCMH_RSFRAME_PRI_SEC = 1, + ATSCMH_RSFRAME_RES = 2, +}; + +enum atscmh_rs_code_mode { + ATSCMH_RSCODE_211_187 = 0, + ATSCMH_RSCODE_223_187 = 1, + ATSCMH_RSCODE_235_187 = 2, + ATSCMH_RSCODE_RES = 3, +}; + +#define NO_STREAM_ID_FILTER (~0U) +#define LNA_AUTO (~0U) + +struct dtv_cmds_h { + char *name; /* A display name for debugging purposes */ + + __u32 cmd; /* A unique ID */ + + /* Flags */ + __u32 set:1; /* Either a set or get property */ + __u32 buffer:1; /* Does this property use the buffer? */ + __u32 reserved:30; /* Align */ +}; + +struct dtv_property { + __u32 cmd; + __u32 reserved[3]; + union { + __u32 data; + struct { + __u8 data[32]; + __u32 len; + __u32 reserved1[3]; + void *reserved2; + } buffer; + } u; + int result; +} __attribute__ ((packed)); + +/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */ +#define DTV_IOCTL_MAX_MSGS 64 + +struct dtv_properties { + __u32 num; + struct dtv_property *props; +}; + +#define FE_SET_PROPERTY _IOW('o', 82, struct dtv_properties) +#define FE_GET_PROPERTY _IOR('o', 83, struct dtv_properties) + + +/** + * When set, this flag will disable any zigzagging or other "normal" tuning + * behaviour. Additionally, there will be no automatic monitoring of the lock + * status, and hence no frontend events will be generated. If a frontend device + * is closed, this flag will be automatically turned off when the device is + * reopened read-write. + */ +#define FE_TUNE_MODE_ONESHOT 0x01 + + +#define FE_GET_INFO _IOR('o', 61, struct dvb_frontend_info) + +#define FE_DISEQC_RESET_OVERLOAD _IO('o', 62) +#define FE_DISEQC_SEND_MASTER_CMD _IOW('o', 63, struct dvb_diseqc_master_cmd) +#define FE_DISEQC_RECV_SLAVE_REPLY _IOR('o', 64, struct dvb_diseqc_slave_reply) +#define FE_DISEQC_SEND_BURST _IO('o', 65) /* fe_sec_mini_cmd_t */ + +#define FE_SET_TONE _IO('o', 66) /* fe_sec_tone_mode_t */ +#define FE_SET_VOLTAGE _IO('o', 67) /* fe_sec_voltage_t */ +#define FE_ENABLE_HIGH_LNB_VOLTAGE _IO('o', 68) /* int */ + +#define FE_READ_STATUS _IOR('o', 69, fe_status_t) +#define FE_READ_BER _IOR('o', 70, __u32) +#define FE_READ_SIGNAL_STRENGTH _IOR('o', 71, __u16) +#define FE_READ_SNR _IOR('o', 72, __u16) +#define FE_READ_UNCORRECTED_BLOCKS _IOR('o', 73, __u32) + +#define FE_SET_FRONTEND _IOW('o', 76, struct dvb_frontend_parameters) +#define FE_GET_FRONTEND _IOR('o', 77, struct dvb_frontend_parameters) +#define FE_SET_FRONTEND_TUNE_MODE _IO('o', 81) /* unsigned int */ +#define FE_GET_EVENT _IOR('o', 78, struct dvb_frontend_event) + +#define FE_DISHNETWORK_SEND_LEGACY_CMD _IO('o', 80) /* unsigned int */ + +#endif /*_DVBFRONTEND_H_*/ diff --git a/include/uapi/linux/dvb/net.h b/include/uapi/linux/dvb/net.h new file mode 100644 index 00000000000..f451e7eb0b0 --- /dev/null +++ b/include/uapi/linux/dvb/net.h @@ -0,0 +1,52 @@ +/* + * net.h + * + * Copyright (C) 2000 Marcus Metzler + * & Ralph Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _DVBNET_H_ +#define _DVBNET_H_ + +#include + +struct dvb_net_if { + __u16 pid; + __u16 if_num; + __u8 feedtype; +#define DVB_NET_FEEDTYPE_MPE 0 /* multi protocol encapsulation */ +#define DVB_NET_FEEDTYPE_ULE 1 /* ultra lightweight encapsulation */ +}; + + +#define NET_ADD_IF _IOWR('o', 52, struct dvb_net_if) +#define NET_REMOVE_IF _IO('o', 53) +#define NET_GET_IF _IOWR('o', 54, struct dvb_net_if) + + +/* binary compatibility cruft: */ +struct __dvb_net_if_old { + __u16 pid; + __u16 if_num; +}; +#define __NET_ADD_IF_OLD _IOWR('o', 52, struct __dvb_net_if_old) +#define __NET_GET_IF_OLD _IOWR('o', 54, struct __dvb_net_if_old) + + +#endif /*_DVBNET_H_*/ diff --git a/include/uapi/linux/dvb/osd.h b/include/uapi/linux/dvb/osd.h new file mode 100644 index 00000000000..880e6843583 --- /dev/null +++ b/include/uapi/linux/dvb/osd.h @@ -0,0 +1,144 @@ +/* + * osd.h + * + * Copyright (C) 2001 Ralph Metzler + * & Marcus Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Lesser Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _DVBOSD_H_ +#define _DVBOSD_H_ + +#include + +typedef enum { + // All functions return -2 on "not open" + OSD_Close=1, // () + // Disables OSD and releases the buffers + // returns 0 on success + OSD_Open, // (x0,y0,x1,y1,BitPerPixel[2/4/8](color&0x0F),mix[0..15](color&0xF0)) + // Opens OSD with this size and bit depth + // returns 0 on success, -1 on DRAM allocation error, -2 on "already open" + OSD_Show, // () + // enables OSD mode + // returns 0 on success + OSD_Hide, // () + // disables OSD mode + // returns 0 on success + OSD_Clear, // () + // Sets all pixel to color 0 + // returns 0 on success + OSD_Fill, // (color) + // Sets all pixel to color + // returns 0 on success + OSD_SetColor, // (color,R{x0},G{y0},B{x1},opacity{y1}) + // set palette entry to , and apply + // R,G,B: 0..255 + // R=Red, G=Green, B=Blue + // opacity=0: pixel opacity 0% (only video pixel shows) + // opacity=1..254: pixel opacity as specified in header + // opacity=255: pixel opacity 100% (only OSD pixel shows) + // returns 0 on success, -1 on error + OSD_SetPalette, // (firstcolor{color},lastcolor{x0},data) + // Set a number of entries in the palette + // sets the entries "firstcolor" through "lastcolor" from the array "data" + // data has 4 byte for each color: + // R,G,B, and a opacity value: 0->transparent, 1..254->mix, 255->pixel + OSD_SetTrans, // (transparency{color}) + // Sets transparency of mixed pixel (0..15) + // returns 0 on success + OSD_SetPixel, // (x0,y0,color) + // sets pixel , to color number + // returns 0 on success, -1 on error + OSD_GetPixel, // (x0,y0) + // returns color number of pixel ,, or -1 + OSD_SetRow, // (x0,y0,x1,data) + // fills pixels x0,y through x1,y with the content of data[] + // returns 0 on success, -1 on clipping all pixel (no pixel drawn) + OSD_SetBlock, // (x0,y0,x1,y1,increment{color},data) + // fills pixels x0,y0 through x1,y1 with the content of data[] + // inc contains the width of one line in the data block, + // inc<=0 uses blockwidth as linewidth + // returns 0 on success, -1 on clipping all pixel + OSD_FillRow, // (x0,y0,x1,color) + // fills pixels x0,y through x1,y with the color + // returns 0 on success, -1 on clipping all pixel + OSD_FillBlock, // (x0,y0,x1,y1,color) + // fills pixels x0,y0 through x1,y1 with the color + // returns 0 on success, -1 on clipping all pixel + OSD_Line, // (x0,y0,x1,y1,color) + // draw a line from x0,y0 to x1,y1 with the color + // returns 0 on success + OSD_Query, // (x0,y0,x1,y1,xasp{color}}), yasp=11 + // fills parameters with the picture dimensions and the pixel aspect ratio + // returns 0 on success + OSD_Test, // () + // draws a test picture. for debugging purposes only + // returns 0 on success +// TODO: remove "test" in final version + OSD_Text, // (x0,y0,size,color,text) + OSD_SetWindow, // (x0) set window with number 0 + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _DVBVERSION_H_ +#define _DVBVERSION_H_ + +#define DVB_API_VERSION 5 +#define DVB_API_VERSION_MINOR 9 + +#endif /*_DVBVERSION_H_*/ diff --git a/include/uapi/linux/dvb/video.h b/include/uapi/linux/dvb/video.h new file mode 100644 index 00000000000..d3d14a59d2d --- /dev/null +++ b/include/uapi/linux/dvb/video.h @@ -0,0 +1,274 @@ +/* + * video.h + * + * Copyright (C) 2000 Marcus Metzler + * & Ralph Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _UAPI_DVBVIDEO_H_ +#define _UAPI_DVBVIDEO_H_ + +#include +#ifndef __KERNEL__ +#include +#include +#endif + +typedef enum { + VIDEO_FORMAT_4_3, /* Select 4:3 format */ + VIDEO_FORMAT_16_9, /* Select 16:9 format. */ + VIDEO_FORMAT_221_1 /* 2.21:1 */ +} video_format_t; + + +typedef enum { + VIDEO_SYSTEM_PAL, + VIDEO_SYSTEM_NTSC, + VIDEO_SYSTEM_PALN, + VIDEO_SYSTEM_PALNc, + VIDEO_SYSTEM_PALM, + VIDEO_SYSTEM_NTSC60, + VIDEO_SYSTEM_PAL60, + VIDEO_SYSTEM_PALM60 +} video_system_t; + + +typedef enum { + VIDEO_PAN_SCAN, /* use pan and scan format */ + VIDEO_LETTER_BOX, /* use letterbox format */ + VIDEO_CENTER_CUT_OUT /* use center cut out format */ +} video_displayformat_t; + +typedef struct { + int w; + int h; + video_format_t aspect_ratio; +} video_size_t; + +typedef enum { + VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */ + VIDEO_SOURCE_MEMORY /* If this source is selected, the stream + comes from the user through the write + system call */ +} video_stream_source_t; + + +typedef enum { + VIDEO_STOPPED, /* Video is stopped */ + VIDEO_PLAYING, /* Video is currently playing */ + VIDEO_FREEZED /* Video is freezed */ +} video_play_state_t; + + +/* Decoder commands */ +#define VIDEO_CMD_PLAY (0) +#define VIDEO_CMD_STOP (1) +#define VIDEO_CMD_FREEZE (2) +#define VIDEO_CMD_CONTINUE (3) + +/* Flags for VIDEO_CMD_FREEZE */ +#define VIDEO_CMD_FREEZE_TO_BLACK (1 << 0) + +/* Flags for VIDEO_CMD_STOP */ +#define VIDEO_CMD_STOP_TO_BLACK (1 << 0) +#define VIDEO_CMD_STOP_IMMEDIATELY (1 << 1) + +/* Play input formats: */ +/* The decoder has no special format requirements */ +#define VIDEO_PLAY_FMT_NONE (0) +/* The decoder requires full GOPs */ +#define VIDEO_PLAY_FMT_GOP (1) + +/* The structure must be zeroed before use by the application + This ensures it can be extended safely in the future. */ +struct video_command { + __u32 cmd; + __u32 flags; + union { + struct { + __u64 pts; + } stop; + + struct { + /* 0 or 1000 specifies normal speed, + 1 specifies forward single stepping, + -1 specifies backward single stepping, + >1: playback at speed/1000 of the normal speed, + <-1: reverse playback at (-speed/1000) of the normal speed. */ + __s32 speed; + __u32 format; + } play; + + struct { + __u32 data[16]; + } raw; + }; +}; + +/* FIELD_UNKNOWN can be used if the hardware does not know whether + the Vsync is for an odd, even or progressive (i.e. non-interlaced) + field. */ +#define VIDEO_VSYNC_FIELD_UNKNOWN (0) +#define VIDEO_VSYNC_FIELD_ODD (1) +#define VIDEO_VSYNC_FIELD_EVEN (2) +#define VIDEO_VSYNC_FIELD_PROGRESSIVE (3) + +struct video_event { + __s32 type; +#define VIDEO_EVENT_SIZE_CHANGED 1 +#define VIDEO_EVENT_FRAME_RATE_CHANGED 2 +#define VIDEO_EVENT_DECODER_STOPPED 3 +#define VIDEO_EVENT_VSYNC 4 + __kernel_time_t timestamp; + union { + video_size_t size; + unsigned int frame_rate; /* in frames per 1000sec */ + unsigned char vsync_field; /* unknown/odd/even/progressive */ + } u; +}; + + +struct video_status { + int video_blank; /* blank video on freeze? */ + video_play_state_t play_state; /* current state of playback */ + video_stream_source_t stream_source; /* current source (demux/memory) */ + video_format_t video_format; /* current aspect ratio of stream*/ + video_displayformat_t display_format;/* selected cropping mode */ +}; + + +struct video_still_picture { + char __user *iFrame; /* pointer to a single iframe in memory */ + __s32 size; +}; + + +typedef +struct video_highlight { + int active; /* 1=show highlight, 0=hide highlight */ + __u8 contrast1; /* 7- 4 Pattern pixel contrast */ + /* 3- 0 Background pixel contrast */ + __u8 contrast2; /* 7- 4 Emphasis pixel-2 contrast */ + /* 3- 0 Emphasis pixel-1 contrast */ + __u8 color1; /* 7- 4 Pattern pixel color */ + /* 3- 0 Background pixel color */ + __u8 color2; /* 7- 4 Emphasis pixel-2 color */ + /* 3- 0 Emphasis pixel-1 color */ + __u32 ypos; /* 23-22 auto action mode */ + /* 21-12 start y */ + /* 9- 0 end y */ + __u32 xpos; /* 23-22 button color number */ + /* 21-12 start x */ + /* 9- 0 end x */ +} video_highlight_t; + + +typedef struct video_spu { + int active; + int stream_id; +} video_spu_t; + + +typedef struct video_spu_palette { /* SPU Palette information */ + int length; + __u8 __user *palette; +} video_spu_palette_t; + + +typedef struct video_navi_pack { + int length; /* 0 ... 1024 */ + __u8 data[1024]; +} video_navi_pack_t; + + +typedef __u16 video_attributes_t; +/* bits: descr. */ +/* 15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) */ +/* 13-12 TV system (0=525/60, 1=625/50) */ +/* 11-10 Aspect ratio (0=4:3, 3=16:9) */ +/* 9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca */ +/* 7 line 21-1 data present in GOP (1=yes, 0=no) */ +/* 6 line 21-2 data present in GOP (1=yes, 0=no) */ +/* 5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 */ +/* 2 source letterboxed (1=yes, 0=no) */ +/* 0 film/camera mode (0=camera, 1=film (625/50 only)) */ + + +/* bit definitions for capabilities: */ +/* can the hardware decode MPEG1 and/or MPEG2? */ +#define VIDEO_CAP_MPEG1 1 +#define VIDEO_CAP_MPEG2 2 +/* can you send a system and/or program stream to video device? + (you still have to open the video and the audio device but only + send the stream to the video device) */ +#define VIDEO_CAP_SYS 4 +#define VIDEO_CAP_PROG 8 +/* can the driver also handle SPU, NAVI and CSS encoded data? + (CSS API is not present yet) */ +#define VIDEO_CAP_SPU 16 +#define VIDEO_CAP_NAVI 32 +#define VIDEO_CAP_CSS 64 + + +#define VIDEO_STOP _IO('o', 21) +#define VIDEO_PLAY _IO('o', 22) +#define VIDEO_FREEZE _IO('o', 23) +#define VIDEO_CONTINUE _IO('o', 24) +#define VIDEO_SELECT_SOURCE _IO('o', 25) +#define VIDEO_SET_BLANK _IO('o', 26) +#define VIDEO_GET_STATUS _IOR('o', 27, struct video_status) +#define VIDEO_GET_EVENT _IOR('o', 28, struct video_event) +#define VIDEO_SET_DISPLAY_FORMAT _IO('o', 29) +#define VIDEO_STILLPICTURE _IOW('o', 30, struct video_still_picture) +#define VIDEO_FAST_FORWARD _IO('o', 31) +#define VIDEO_SLOWMOTION _IO('o', 32) +#define VIDEO_GET_CAPABILITIES _IOR('o', 33, unsigned int) +#define VIDEO_CLEAR_BUFFER _IO('o', 34) +#define VIDEO_SET_ID _IO('o', 35) +#define VIDEO_SET_STREAMTYPE _IO('o', 36) +#define VIDEO_SET_FORMAT _IO('o', 37) +#define VIDEO_SET_SYSTEM _IO('o', 38) +#define VIDEO_SET_HIGHLIGHT _IOW('o', 39, video_highlight_t) +#define VIDEO_SET_SPU _IOW('o', 50, video_spu_t) +#define VIDEO_SET_SPU_PALETTE _IOW('o', 51, video_spu_palette_t) +#define VIDEO_GET_NAVI _IOR('o', 52, video_navi_pack_t) +#define VIDEO_SET_ATTRIBUTES _IO('o', 53) +#define VIDEO_GET_SIZE _IOR('o', 55, video_size_t) +#define VIDEO_GET_FRAME_RATE _IOR('o', 56, unsigned int) + +/** + * VIDEO_GET_PTS + * + * Read the 33 bit presentation time stamp as defined + * in ITU T-REC-H.222.0 / ISO/IEC 13818-1. + * + * The PTS should belong to the currently played + * frame if possible, but may also be a value close to it + * like the PTS of the last decoded frame or the last PTS + * extracted by the PES parser. + */ +#define VIDEO_GET_PTS _IOR('o', 57, __u64) + +/* Read the number of displayed frames since the decoder was started */ +#define VIDEO_GET_FRAME_COUNT _IOR('o', 58, __u64) + +#define VIDEO_COMMAND _IOWR('o', 59, struct video_command) +#define VIDEO_TRY_COMMAND _IOWR('o', 60, struct video_command) + +#endif /* _UAPI_DVBVIDEO_H_ */ -- cgit v1.2.3-70-g09d2 From ce3b5952bac17835363543ddf97e89d98b1d771f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Oct 2012 10:05:09 -0300 Subject: DocBook/media/Makefile: Fix build due to uapi breakage The uapi changeset forgot to fix the header locations, needed for the DocBook specs. Fix it. Cc: David Howells Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/Makefile | 76 ++++++++++++++++++------------------ 1 file changed, 38 insertions(+), 38 deletions(-) diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile index 9b7e4c55792..f9fd615427f 100644 --- a/Documentation/DocBook/media/Makefile +++ b/Documentation/DocBook/media/Makefile @@ -56,15 +56,15 @@ FUNCS = \ write \ IOCTLS = \ - $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/videodev2.h) \ - $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/audio.h) \ - $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/ca.h) \ - $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/dmx.h) \ - $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/frontend.h) \ - $(shell perl -ne 'print "$$1 " if /\#define\s+([A-Z][^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/net.h) \ - $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/dvb/video.h) \ - $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/media.h) \ - $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/linux/v4l2-subdev.h) \ + $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/videodev2.h) \ + $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/audio.h) \ + $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/ca.h) \ + $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/dmx.h) \ + $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/frontend.h) \ + $(shell perl -ne 'print "$$1 " if /\#define\s+([A-Z][^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/net.h) \ + $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/video.h) \ + $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/media.h) \ + $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \ VIDIOC_SUBDEV_G_FRAME_INTERVAL \ VIDIOC_SUBDEV_S_FRAME_INTERVAL \ VIDIOC_SUBDEV_ENUM_MBUS_CODE \ @@ -74,32 +74,32 @@ IOCTLS = \ VIDIOC_SUBDEV_S_SELECTION \ TYPES = \ - $(shell perl -ne 'print "$$1 " if /^typedef\s+[^\s]+\s+([^\s]+)\;/' $(srctree)/include/linux/videodev2.h) \ - $(shell perl -ne 'print "$$1 " if /^}\s+([a-z0-9_]+_t)/' $(srctree)/include/linux/dvb/frontend.h) + $(shell perl -ne 'print "$$1 " if /^typedef\s+[^\s]+\s+([^\s]+)\;/' $(srctree)/include/uapi/linux/videodev2.h) \ + $(shell perl -ne 'print "$$1 " if /^}\s+([a-z0-9_]+_t)/' $(srctree)/include/uapi/linux/dvb/frontend.h) ENUMS = \ - $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/videodev2.h) \ - $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/audio.h) \ - $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/ca.h) \ - $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/dmx.h) \ - $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/frontend.h) \ - $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/net.h) \ - $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/dvb/video.h) \ - $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/media.h) \ - $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/v4l2-mediabus.h) \ - $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/linux/v4l2-subdev.h) + $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/videodev2.h) \ + $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/audio.h) \ + $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/ca.h) \ + $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/dmx.h) \ + $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/frontend.h) \ + $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/net.h) \ + $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/dvb/video.h) \ + $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/media.h) \ + $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-mediabus.h) \ + $(shell perl -ne 'print "$$1 " if /^enum\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-subdev.h) STRUCTS = \ - $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/linux/videodev2.h) \ - $(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s\{]+)\s*/)' $(srctree)/include/linux/dvb/audio.h) \ - $(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/linux/dvb/ca.h) \ - $(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/linux/dvb/dmx.h) \ - $(shell perl -ne 'print "$$1 " if (!/dtv\_cmds\_h/ && /^struct\s+([^\s]+)\s+/)' $(srctree)/include/linux/dvb/frontend.h) \ - $(shell perl -ne 'print "$$1 " if (/^struct\s+([A-Z][^\s]+)\s+/)' $(srctree)/include/linux/dvb/net.h) \ - $(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/linux/dvb/video.h) \ - $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/linux/media.h) \ - $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/linux/v4l2-subdev.h) \ - $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/linux/v4l2-mediabus.h) + $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/videodev2.h) \ + $(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s\{]+)\s*/)' $(srctree)/include/uapi/linux/dvb/audio.h) \ + $(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/ca.h) \ + $(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/dmx.h) \ + $(shell perl -ne 'print "$$1 " if (!/dtv\_cmds\_h/ && /^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/frontend.h) \ + $(shell perl -ne 'print "$$1 " if (/^struct\s+([A-Z][^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/net.h) \ + $(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/video.h) \ + $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/media.h) \ + $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \ + $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-mediabus.h) ERRORS = \ E2BIG \ @@ -205,7 +205,7 @@ $(MEDIA_OBJ_DIR)/v4l2.xml: $(OBJIMGFILES) @(ln -sf $(MEDIA_SRC_DIR)/v4l/*xml $(MEDIA_OBJ_DIR)/) @(ln -sf $(MEDIA_SRC_DIR)/dvb/*xml $(MEDIA_OBJ_DIR)/) -$(MEDIA_OBJ_DIR)/videodev2.h.xml: $(srctree)/include/linux/videodev2.h $(MEDIA_OBJ_DIR)/v4l2.xml +$(MEDIA_OBJ_DIR)/videodev2.h.xml: $(srctree)/include/uapi/linux/videodev2.h $(MEDIA_OBJ_DIR)/v4l2.xml @$($(quiet)gen_xml) @( \ echo "") > $@ @@ -216,7 +216,7 @@ $(MEDIA_OBJ_DIR)/videodev2.h.xml: $(srctree)/include/linux/videodev2.h $(MEDIA_O @( \ echo "") >> $@ -$(MEDIA_OBJ_DIR)/audio.h.xml: $(srctree)/include/linux/dvb/audio.h $(MEDIA_OBJ_DIR)/v4l2.xml +$(MEDIA_OBJ_DIR)/audio.h.xml: $(srctree)/include/uapi/linux/dvb/audio.h $(MEDIA_OBJ_DIR)/v4l2.xml @$($(quiet)gen_xml) @( \ echo "") > $@ @@ -227,7 +227,7 @@ $(MEDIA_OBJ_DIR)/audio.h.xml: $(srctree)/include/linux/dvb/audio.h $(MEDIA_OBJ_D @( \ echo "") >> $@ -$(MEDIA_OBJ_DIR)/ca.h.xml: $(srctree)/include/linux/dvb/ca.h $(MEDIA_OBJ_DIR)/v4l2.xml +$(MEDIA_OBJ_DIR)/ca.h.xml: $(srctree)/include/uapi/linux/dvb/ca.h $(MEDIA_OBJ_DIR)/v4l2.xml @$($(quiet)gen_xml) @( \ echo "") > $@ @@ -238,7 +238,7 @@ $(MEDIA_OBJ_DIR)/ca.h.xml: $(srctree)/include/linux/dvb/ca.h $(MEDIA_OBJ_DIR)/v4 @( \ echo "") >> $@ -$(MEDIA_OBJ_DIR)/dmx.h.xml: $(srctree)/include/linux/dvb/dmx.h $(MEDIA_OBJ_DIR)/v4l2.xml +$(MEDIA_OBJ_DIR)/dmx.h.xml: $(srctree)/include/uapi/linux/dvb/dmx.h $(MEDIA_OBJ_DIR)/v4l2.xml @$($(quiet)gen_xml) @( \ echo "") > $@ @@ -249,7 +249,7 @@ $(MEDIA_OBJ_DIR)/dmx.h.xml: $(srctree)/include/linux/dvb/dmx.h $(MEDIA_OBJ_DIR)/ @( \ echo "") >> $@ -$(MEDIA_OBJ_DIR)/frontend.h.xml: $(srctree)/include/linux/dvb/frontend.h $(MEDIA_OBJ_DIR)/v4l2.xml +$(MEDIA_OBJ_DIR)/frontend.h.xml: $(srctree)/include/uapi/linux/dvb/frontend.h $(MEDIA_OBJ_DIR)/v4l2.xml @$($(quiet)gen_xml) @( \ echo "") > $@ @@ -260,7 +260,7 @@ $(MEDIA_OBJ_DIR)/frontend.h.xml: $(srctree)/include/linux/dvb/frontend.h $(MEDIA @( \ echo "") >> $@ -$(MEDIA_OBJ_DIR)/net.h.xml: $(srctree)/include/linux/dvb/net.h $(MEDIA_OBJ_DIR)/v4l2.xml +$(MEDIA_OBJ_DIR)/net.h.xml: $(srctree)/include/uapi/linux/dvb/net.h $(MEDIA_OBJ_DIR)/v4l2.xml @$($(quiet)gen_xml) @( \ echo "") > $@ @@ -271,7 +271,7 @@ $(MEDIA_OBJ_DIR)/net.h.xml: $(srctree)/include/linux/dvb/net.h $(MEDIA_OBJ_DIR)/ @( \ echo "") >> $@ -$(MEDIA_OBJ_DIR)/video.h.xml: $(srctree)/include/linux/dvb/video.h $(MEDIA_OBJ_DIR)/v4l2.xml +$(MEDIA_OBJ_DIR)/video.h.xml: $(srctree)/include/uapi/linux/dvb/video.h $(MEDIA_OBJ_DIR)/v4l2.xml @$($(quiet)gen_xml) @( \ echo "") > $@ -- cgit v1.2.3-70-g09d2 From cd0b16c1c3cda12dbed1f8de8f1a9b0591990724 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 13 Oct 2012 00:30:28 -0400 Subject: NLM: nlm_lookup_file() may return NLMv4-specific error codes If the filehandle is stale, or open access is denied for some reason, nlm_fopen() may return one of the NLMv4-specific error codes nlm4_stale_fh or nlm4_failed. These get passed right through nlm_lookup_file(), and so when nlmsvc_retrieve_args() calls the latter, it needs to filter the result through the cast_status() machinery. Failure to do so, will trigger the BUG_ON() in encode_nlm_stat... Signed-off-by: Trond Myklebust Reported-by: Larry McVoy Cc: stable@kernel.org Signed-off-by: J. Bruce Fields --- fs/lockd/clntxdr.c | 2 +- fs/lockd/svcproc.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/lockd/clntxdr.c b/fs/lockd/clntxdr.c index d269ada7670..982d2676e1f 100644 --- a/fs/lockd/clntxdr.c +++ b/fs/lockd/clntxdr.c @@ -223,7 +223,7 @@ static void encode_nlm_stat(struct xdr_stream *xdr, { __be32 *p; - BUG_ON(be32_to_cpu(stat) > NLM_LCK_DENIED_GRACE_PERIOD); + WARN_ON_ONCE(be32_to_cpu(stat) > NLM_LCK_DENIED_GRACE_PERIOD); p = xdr_reserve_space(xdr, 4); *p = stat; } diff --git a/fs/lockd/svcproc.c b/fs/lockd/svcproc.c index 3009a365e08..21171f0c647 100644 --- a/fs/lockd/svcproc.c +++ b/fs/lockd/svcproc.c @@ -68,7 +68,8 @@ nlmsvc_retrieve_args(struct svc_rqst *rqstp, struct nlm_args *argp, /* Obtain file pointer. Not used by FREE_ALL call. */ if (filp != NULL) { - if ((error = nlm_lookup_file(rqstp, &file, &lock->fh)) != 0) + error = cast_status(nlm_lookup_file(rqstp, &file, &lock->fh)); + if (error != 0) goto no_locks; *filp = file; -- cgit v1.2.3-70-g09d2 From 356712f6e296fdae1edae51b96b485ed830bdc0c Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 16 Oct 2012 14:51:04 -0300 Subject: perf python: Initialize 'page_size' variable The commit 0c1fe6b: 'perf tools: Have the page size value available for all tools' Broke the python binding because the global variable 'page_size' is initialized on the main() routine, that is not called when using just the python binding, causing evlist.mmap() to fail because it expects that variable to be initialized to the system's page size. Fix it by initializing it on the binding init routine. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-vrvp3azmbfzexnpmkhmvtzzc@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/python.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c index 9181bf212fb..a2657fd9683 100644 --- a/tools/perf/util/python.c +++ b/tools/perf/util/python.c @@ -1015,6 +1015,8 @@ PyMODINIT_FUNC initperf(void) pyrf_cpu_map__setup_types() < 0) return; + page_size = sysconf(_SC_PAGE_SIZE); + Py_INCREF(&pyrf_evlist__type); PyModule_AddObject(module, "evlist", (PyObject*)&pyrf_evlist__type); -- cgit v1.2.3-70-g09d2 From f8de2885eba35d20a062325bcdfe5d71e9dc2222 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 16 Oct 2012 14:53:24 -0300 Subject: perf python: Link with libtraceevent The evsel methods to read tracepoint fields uses libtraceevent functions, becoming needed by the python binding as well. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-j3o4v7jyvp9ke9n230l96a1m@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/setup.py | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/util/setup.py b/tools/perf/util/setup.py index d0f9f29cf18..09c3cea95d3 100644 --- a/tools/perf/util/setup.py +++ b/tools/perf/util/setup.py @@ -31,6 +31,7 @@ perf = Extension('perf', sources = ext_sources, include_dirs = ['util/include'], extra_compile_args = cflags, + extra_objects = [build_tmp + '/../../libtraceevent.a'], ) setup(name='perf', -- cgit v1.2.3-70-g09d2 From 77626081849c9050b20670e5d832aca54c966936 Mon Sep 17 00:00:00 2001 From: David Miller Date: Wed, 17 Oct 2012 01:06:56 -0400 Subject: perf tools: Fix build on sparc. More UAPI stuff. Signed-off-by: David S. Miller Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20121017.010656.383828471689899431.davem@davemloft.net Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/perf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/perf.h b/tools/perf/perf.h index 87f4ec6d1f3..8421c20a25f 100644 --- a/tools/perf/perf.h +++ b/tools/perf/perf.h @@ -57,7 +57,7 @@ void get_term_dimensions(struct winsize *ws); #endif #ifdef __sparc__ -#include "../../arch/sparc/include/asm/unistd.h" +#include "../../arch/sparc/include/uapi/asm/unistd.h" #define rmb() asm volatile("":::"memory") #define cpu_relax() asm volatile("":::"memory") #define CPUINFO_PROC "cpu" -- cgit v1.2.3-70-g09d2 From a40b012f76e4016af7a56a9671904118b23107e8 Mon Sep 17 00:00:00 2001 From: Antony Pavlov Date: Tue, 16 Oct 2012 01:38:46 +0400 Subject: MIPS: JZ4740: Fix '#include guard' in serial.h Signed-off-by: Antony Pavlov Cc: linux-mips@linux-mips.org Cc: Lars-Peter Clausen Patchwork: https://patchwork.linux-mips.org/patch/4424/ Signed-off-by: Ralf Baechle --- arch/mips/jz4740/serial.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/jz4740/serial.h b/arch/mips/jz4740/serial.h index b9fe3ade028..aa5a93982c4 100644 --- a/arch/mips/jz4740/serial.h +++ b/arch/mips/jz4740/serial.h @@ -14,6 +14,7 @@ */ #ifndef __MIPS_JZ4740_SERIAL_H__ +#define __MIPS_JZ4740_SERIAL_H__ void jz4740_serial_out(struct uart_port *p, int offset, int value); -- cgit v1.2.3-70-g09d2 From a12265400c18e6e67d444f05fec3a792a2f87c10 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 17 Oct 2012 17:00:50 +0200 Subject: MIPS: JZ4740: Forward declare struct uart_port in header. As suggested by Geert Uytterhoeven . Signed-off-by: Ralf Baechle Cc: Antony Pavlov Cc: linux-mips@linux-mips.org Cc: Lars-Peter Clausen --- arch/mips/jz4740/serial.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/jz4740/serial.h b/arch/mips/jz4740/serial.h index aa5a93982c4..8eb715bb1ea 100644 --- a/arch/mips/jz4740/serial.h +++ b/arch/mips/jz4740/serial.h @@ -16,6 +16,8 @@ #ifndef __MIPS_JZ4740_SERIAL_H__ #define __MIPS_JZ4740_SERIAL_H__ +struct uart_port; + void jz4740_serial_out(struct uart_port *p, int offset, int value); #endif -- cgit v1.2.3-70-g09d2 From 10f571d09106c3eb85951896522c9650596eff2e Mon Sep 17 00:00:00 2001 From: Maxim Kachur Date: Wed, 17 Oct 2012 18:18:10 +0200 Subject: ALSA: emu10k1: add chip details for E-mu 1010 PCIe card Add chip details for E-mu 1010 PCIe card. It has the same chip as found in E-mu 1010b but it uses different PCI id. Signed-off-by: Maxim Kachur Signed-off-by: Takashi Iwai --- sound/pci/emu10k1/emu10k1_main.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index bed4485f34f..c21adb6ef1d 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -1416,6 +1416,15 @@ static struct snd_emu_chip_details emu_chip_details[] = { .ca0108_chip = 1, .spk71 = 1, .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 new revision */ + /* Tested by Maxim Kachur 17th Oct 2012. */ + /* This is MAEM8986, 0202 is MAEM8980 */ + {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40071102, + .driver = "Audigy2", .name = "E-mu 1010 PCIe [MAEM8986]", + .id = "EMU1010", + .emu10k2_chip = 1, + .ca0108_chip = 1, + .spk71 = 1, + .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 PCIe */ /* Tested by James@superbug.co.uk 8th July 2005. */ /* This is MAEM8810, 0202 is MAEM8820 */ {.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40011102, -- cgit v1.2.3-70-g09d2 From 88a21d2f07d2a4bec2e3e03dd50a39683b938b10 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 17 Oct 2012 13:54:08 -0300 Subject: perf hists browser: Add back callchain folding symbol The commit 5395a04841fc ("perf hists: Separate overhead and baseline columns") makes the "Overhead" column no more the first one, this caused the test that checks if it is time to show if a histogram entry has callchains never hits. Fix it by checking if the 'i' variable is equal to PERF_HPP__OVERHEAD instead of 0. Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-w3lcbx0fx1fnh3l2cbq40q2e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/ui/browsers/hists.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c index fe4430aed63..ef2f93ca749 100644 --- a/tools/perf/ui/browsers/hists.c +++ b/tools/perf/ui/browsers/hists.c @@ -647,7 +647,7 @@ static int hist_browser__show_entry(struct hist_browser *browser, ui_browser__set_percent_color(&browser->b, percent, current_entry); - if (i == 0 && symbol_conf.use_callchain) { + if (i == PERF_HPP__OVERHEAD && symbol_conf.use_callchain) { slsmg_printf("%c ", folded_sign); width -= 2; } -- cgit v1.2.3-70-g09d2 From 1bbbbe779aabe1f0768c2bf8f8c0a5583679b54a Mon Sep 17 00:00:00 2001 From: Jacob Shin Date: Thu, 20 Oct 2011 16:15:26 -0500 Subject: x86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct mapping. On systems with very large memory (1 TB in our case), BIOS may report a reserved region or a hole in the E820 map, even above the 4 GB range. Exclude these from the direct mapping. [ hpa: this should be done not just for > 4 GB but for everything above the legacy region (1 MB), at the very least. That, however, turns out to require significant restructuring. That work is well underway, but is not suitable for rc/stable. ] Cc: stable@kernel.org # > 2.6.32 Signed-off-by: Jacob Shin Link: http://lkml.kernel.org/r/1319145326-13902-1-git-send-email-jacob.shin@amd.com Signed-off-by: H. Peter Anvin --- arch/x86/kernel/setup.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index f4b9b80e1b9..198e774498e 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -919,8 +919,21 @@ void __init setup_arch(char **cmdline_p) #ifdef CONFIG_X86_64 if (max_pfn > max_low_pfn) { - max_pfn_mapped = init_memory_mapping(1UL<<32, - max_pfn<addr + ei->size <= 1UL << 32) + continue; + + if (ei->type == E820_RESERVED) + continue; + + max_pfn_mapped = init_memory_mapping( + ei->addr < 1UL << 32 ? 1UL << 32 : ei->addr, + ei->addr + ei->size); + } + /* can we preseve max_low_pfn ?*/ max_low_pfn = max_pfn; } -- cgit v1.2.3-70-g09d2 From 2c78040c3e2735b8286bbb848db0372b8d408e2d Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 5 Oct 2012 15:09:38 -0700 Subject: USB: usb.h: remove dbg() macro There are no users of this macro anymore in the kernel tree, so finally delete it. Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/include/linux/usb.h b/include/linux/usb.h index 07915a32fb9..10278d18709 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1778,17 +1778,6 @@ static inline int usb_translate_errors(int error_code) extern void usb_register_notify(struct notifier_block *nb); extern void usb_unregister_notify(struct notifier_block *nb); -#ifdef DEBUG -#define dbg(format, arg...) \ - printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg) -#else -#define dbg(format, arg...) \ -do { \ - if (0) \ - printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ -} while (0) -#endif - /* debugfs stuff */ extern struct dentry *usb_debug_root; -- cgit v1.2.3-70-g09d2 From 21c5e50e15b1abd797e62f18fd7f90b9cc004cbd Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Mon, 1 Oct 2012 14:42:05 +0800 Subject: x86, amd, mce: Avoid NULL pointer reference on CPU northbridge lookup When booting on a federated multi-server system (NumaScale), the processor Northbridge lookup returns NULL; add guards to prevent this causing an oops. On those systems, the northbridge is accessed through MMIO and the "normal" northbridge enumeration in amd_nb.c doesn't work since we're generating the northbridge ID from the initial APIC ID and the last is not unique on those systems. Long story short, we end up without northbridge descriptors. Signed-off-by: Daniel J Blueman Cc: stable@vger.kernel.org # 3.6 Link: http://lkml.kernel.org/r/1349073725-14093-1-git-send-email-daniel@numascale-asia.com [ Boris: beef up commit message ] Signed-off-by: Borislav Petkov Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/mcheck/mce_amd.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index c4e916d7737..698b6ec12e0 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -576,12 +576,10 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) int err = 0; if (shared_bank[bank]) { - nb = node_to_amd_nb(amd_get_nb_id(cpu)); - WARN_ON(!nb); /* threshold descriptor already initialized on this node? */ - if (nb->bank4) { + if (nb && nb->bank4) { /* yes, use it */ b = nb->bank4; err = kobject_add(b->kobj, &dev->kobj, name); @@ -615,8 +613,10 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) atomic_set(&b->cpus, 1); /* nb is already initialized, see above */ - WARN_ON(nb->bank4); - nb->bank4 = b; + if (nb) { + WARN_ON(nb->bank4); + nb->bank4 = b; + } } err = allocate_threshold_blocks(cpu, bank, 0, -- cgit v1.2.3-70-g09d2 From 212ba90696ab4884e2025b0b13726d67aadc2cd4 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Tue, 17 Jul 2012 00:01:26 +0200 Subject: SUNRPC: Prevent kernel stack corruption on long values of flush The buffer size in read_flush() is too small for the longest possible values for it. This can lead to a kernel stack corruption: [ 43.047329] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff833e64b4 [ 43.047329] [ 43.049030] Pid: 6015, comm: trinity-child18 Tainted: G W 3.5.0-rc7-next-20120716-sasha #221 [ 43.050038] Call Trace: [ 43.050435] [] panic+0xcd/0x1f4 [ 43.050931] [] ? read_flush.isra.7+0xe4/0x100 [ 43.051602] [] __stack_chk_fail+0x16/0x20 [ 43.052206] [] read_flush.isra.7+0xe4/0x100 [ 43.052951] [] ? read_flush_pipefs+0x30/0x30 [ 43.053594] [] read_flush_procfs+0x2c/0x30 [ 43.053596] [] proc_reg_read+0x9c/0xd0 [ 43.053596] [] ? proc_reg_write+0xd0/0xd0 [ 43.053596] [] do_loop_readv_writev+0x4b/0x90 [ 43.053596] [] do_readv_writev+0xf6/0x1d0 [ 43.053596] [] vfs_readv+0x3e/0x60 [ 43.053596] [] sys_readv+0x48/0xb0 [ 43.053596] [] system_call_fastpath+0x1a/0x1f Signed-off-by: Sasha Levin Cc: stable@kernel.org Signed-off-by: J. Bruce Fields --- net/sunrpc/cache.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c index 2a68bb3db77..fc2f7aa4dca 100644 --- a/net/sunrpc/cache.c +++ b/net/sunrpc/cache.c @@ -1409,11 +1409,11 @@ static ssize_t read_flush(struct file *file, char __user *buf, size_t count, loff_t *ppos, struct cache_detail *cd) { - char tbuf[20]; + char tbuf[22]; unsigned long p = *ppos; size_t len; - sprintf(tbuf, "%lu\n", convert_to_wallclock(cd->flush_time)); + snprintf(tbuf, sizeof(tbuf), "%lu\n", convert_to_wallclock(cd->flush_time)); len = strlen(tbuf); if (p >= len) return 0; -- cgit v1.2.3-70-g09d2 From 2c76a12ae9f5e6e2afc400bfbdd8b326e7d36b2a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Oct 2012 16:09:23 -0300 Subject: [media] Kconfig: Fix dependencies for driver autoselect options This option is a merge of both analog TV and DVB CUSTOMISE. At the merge, the dependencies were not done right: the menu currently appears only for analog TV. It should also be opened for digital TV. As there are other I2C devices there (flash devices, etc) that aren't related to either one, it is better to make it generic enough to open for all media devices with video. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/Kconfig | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index dd13e3a4c27..4ef0d80b57f 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -163,19 +163,21 @@ source "drivers/media/common/Kconfig" # config MEDIA_SUBDRV_AUTOSELECT - bool "Autoselect analog and hybrid tuner modules to build" - depends on MEDIA_TUNER + bool "Autoselect tuners and i2c modules to build" + depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_CAMERA_SUPPORT default y help - By default, a TV driver auto-selects all possible tuners - thar could be used by the driver. + By default, a media driver auto-selects all possible i2c + devices that are used by any of the supported devices. This is generally the right thing to do, except when there - are strict constraints with regards to the kernel size. + are strict constraints with regards to the kernel size, + like on embedded systems. - Use this option with care, as deselecting tuner drivers which - are in fact necessary will result in TV devices which cannot - be tuned due to lack of the tuning driver. + Use this option with care, as deselecting ancillary drivers which + are, in fact, necessary will result in the lack of the needed + functionality for your device (it may not tune or may not have + the need demodulers). If unsure say Y. -- cgit v1.2.3-70-g09d2 From 014639003c77a51fc319c9fdf225e7747cb6e18d Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 13 Oct 2012 12:20:36 +0200 Subject: usbdevfs: Fix broken scatter-gather transfer The handling of large output bulk transfers is broken; the same user page is read over and over again. Fixed with this patch. Cc: stable Acked-by: Peter Stuge Acked-by: Hans de Goede Acked-by: Alan Stern Signed-off-by: Henrik Rydberg Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index e0356cb859b..b78fbe222b7 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1348,6 +1348,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, ret = -EFAULT; goto error; } + uurb->buffer += u; } totlen -= u; } -- cgit v1.2.3-70-g09d2 From c5211187f7ff8e8dbff4ebf7c011ac4c0ffe319c Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 16 Oct 2012 21:21:21 +0800 Subject: USB: cdc-acm: fix pipe type of write endpoint If the write endpoint is interrupt type, usb_sndintpipe() should be passed to usb_fill_int_urb() instead of usb_sndbulkpipe(). Cc: Oliver Neukum Signed-off-by: Ming Lei Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 981f2132d12..572f4e7bd3f 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1233,7 +1233,7 @@ made_compressed_probe: if (usb_endpoint_xfer_int(epwrite)) usb_fill_int_urb(snd->urb, usb_dev, - usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress), + usb_sndintpipe(usb_dev, epwrite->bEndpointAddress), NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval); else usb_fill_bulk_urb(snd->urb, usb_dev, -- cgit v1.2.3-70-g09d2 From 09eeffb70c086692064f4224490d1cd2ffe43bdd Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sun, 14 Oct 2012 16:22:34 +1300 Subject: usb: Missing dma_mask in uhci-platform.c when probed from device-tree Device-tree probed devices don't get a dev.dma_mask set. This patch sets a default 32bit mask on platforms using devicetree. Without this patch, arch-vt8500 cannot detect uhci attached devices. Signed-off-by: Tony Prisk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-platform.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c index e4780491df4..68ebf20e151 100644 --- a/drivers/usb/host/uhci-platform.c +++ b/drivers/usb/host/uhci-platform.c @@ -60,6 +60,7 @@ static const struct hc_driver uhci_platform_hc_driver = { .hub_control = uhci_hub_control, }; +static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32); static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev) { @@ -71,6 +72,14 @@ static int __devinit uhci_hcd_platform_probe(struct platform_device *pdev) if (usb_disabled()) return -ENODEV; + /* + * Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &platform_uhci_dma_mask; + hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev, pdev->name); if (!hcd) -- cgit v1.2.3-70-g09d2 From 6e1babb3ff2651376f2e9843569fcb39cfe4686b Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sun, 14 Oct 2012 16:22:35 +1300 Subject: usb: Missing dma_mask in ehci-vt8500.c when probed from device-tree Device-tree probed devices don't get a dev.dma_mask set. This patch sets a default 32bit mask on arch-vt8500 when using devicetree. Without this patch, arch-vt8500 cannot detect ehci attached devices. Signed-off-by: Tony Prisk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-vt8500.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c index 96722bfebc8..d3c9a3e397b 100644 --- a/drivers/usb/host/ehci-vt8500.c +++ b/drivers/usb/host/ehci-vt8500.c @@ -85,6 +85,8 @@ static const struct hc_driver vt8500_ehci_hc_driver = { .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; +static u64 vt8500_ehci_dma_mask = DMA_BIT_MASK(32); + static int vt8500_ehci_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; @@ -95,6 +97,14 @@ static int vt8500_ehci_drv_probe(struct platform_device *pdev) if (usb_disabled()) return -ENODEV; + /* + * Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &vt8500_ehci_dma_mask; + if (pdev->resource[1].flags != IORESOURCE_IRQ) { pr_debug("resource[1] is not IORESOURCE_IRQ"); return -ENOMEM; -- cgit v1.2.3-70-g09d2 From 301a29da6e891e7eb95c843af0ecdbe86d01f723 Mon Sep 17 00:00:00 2001 From: Nicolas Boullis Date: Tue, 16 Oct 2012 00:06:23 +0200 Subject: usb: acm: fix the computation of the number of data bits The current code assumes that CSIZE is 0000060, which appears to be wrong on some arches (such as powerpc). Signed-off-by: Nicolas Boullis Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 572f4e7bd3f..6e49ec6f3ad 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -817,10 +817,6 @@ static const __u32 acm_tty_speed[] = { 2500000, 3000000, 3500000, 4000000 }; -static const __u8 acm_tty_size[] = { - 5, 6, 7, 8 -}; - static void acm_tty_set_termios(struct tty_struct *tty, struct ktermios *termios_old) { @@ -834,7 +830,21 @@ static void acm_tty_set_termios(struct tty_struct *tty, newline.bParityType = termios->c_cflag & PARENB ? (termios->c_cflag & PARODD ? 1 : 2) + (termios->c_cflag & CMSPAR ? 2 : 0) : 0; - newline.bDataBits = acm_tty_size[(termios->c_cflag & CSIZE) >> 4]; + switch (termios->c_cflag & CSIZE) { + case CS5: + newline.bDataBits = 5; + break; + case CS6: + newline.bDataBits = 6; + break; + case CS7: + newline.bDataBits = 7; + break; + case CS8: + default: + newline.bDataBits = 8; + break; + } /* FIXME: Needs to clear unsupported bits in the termios */ acm->clocal = ((termios->c_cflag & CLOCAL) != 0); -- cgit v1.2.3-70-g09d2 From 5c1a0f418d8d985f3a62849bcac43fc5404cc592 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:34:55 +0200 Subject: USB: cypress_m8: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cypress_m8.c | 75 ++++++++++++++++++++--------------------- 1 file changed, 37 insertions(+), 38 deletions(-) diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 1befce21e17..f0da1279c11 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -123,10 +123,10 @@ struct cypress_private { }; /* function prototypes for the Cypress USB to serial device */ -static int cypress_earthmate_startup(struct usb_serial *serial); -static int cypress_hidcom_startup(struct usb_serial *serial); -static int cypress_ca42v2_startup(struct usb_serial *serial); -static void cypress_release(struct usb_serial *serial); +static int cypress_earthmate_port_probe(struct usb_serial_port *port); +static int cypress_hidcom_port_probe(struct usb_serial_port *port); +static int cypress_ca42v2_port_probe(struct usb_serial_port *port); +static int cypress_port_remove(struct usb_serial_port *port); static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port); static void cypress_close(struct usb_serial_port *port); static void cypress_dtr_rts(struct usb_serial_port *port, int on); @@ -156,8 +156,8 @@ static struct usb_serial_driver cypress_earthmate_device = { .description = "DeLorme Earthmate USB", .id_table = id_table_earthmate, .num_ports = 1, - .attach = cypress_earthmate_startup, - .release = cypress_release, + .port_probe = cypress_earthmate_port_probe, + .port_remove = cypress_port_remove, .open = cypress_open, .close = cypress_close, .dtr_rts = cypress_dtr_rts, @@ -182,8 +182,8 @@ static struct usb_serial_driver cypress_hidcom_device = { .description = "HID->COM RS232 Adapter", .id_table = id_table_cyphidcomrs232, .num_ports = 1, - .attach = cypress_hidcom_startup, - .release = cypress_release, + .port_probe = cypress_hidcom_port_probe, + .port_remove = cypress_port_remove, .open = cypress_open, .close = cypress_close, .dtr_rts = cypress_dtr_rts, @@ -208,8 +208,8 @@ static struct usb_serial_driver cypress_ca42v2_device = { .description = "Nokia CA-42 V2 Adapter", .id_table = id_table_nokiaca42v2, .num_ports = 1, - .attach = cypress_ca42v2_startup, - .release = cypress_release, + .port_probe = cypress_ca42v2_port_probe, + .port_remove = cypress_port_remove, .open = cypress_open, .close = cypress_close, .dtr_rts = cypress_dtr_rts, @@ -438,10 +438,10 @@ static void cypress_set_dead(struct usb_serial_port *port) *****************************************************************************/ -static int generic_startup(struct usb_serial *serial) +static int cypress_generic_port_probe(struct usb_serial_port *port) { + struct usb_serial *serial = port->serial; struct cypress_private *priv; - struct usb_serial_port *port = serial->port[0]; priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL); if (!priv) @@ -490,14 +490,16 @@ static int generic_startup(struct usb_serial *serial) } -static int cypress_earthmate_startup(struct usb_serial *serial) +static int cypress_earthmate_port_probe(struct usb_serial_port *port) { + struct usb_serial *serial = port->serial; struct cypress_private *priv; - struct usb_serial_port *port = serial->port[0]; + int ret; - if (generic_startup(serial)) { + ret = cypress_generic_port_probe(port); + if (ret) { dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); - return 1; + return ret; } priv = usb_get_serial_port_data(port); @@ -518,56 +520,53 @@ static int cypress_earthmate_startup(struct usb_serial *serial) } return 0; -} /* cypress_earthmate_startup */ - +} -static int cypress_hidcom_startup(struct usb_serial *serial) +static int cypress_hidcom_port_probe(struct usb_serial_port *port) { struct cypress_private *priv; - struct usb_serial_port *port = serial->port[0]; + int ret; - if (generic_startup(serial)) { + ret = cypress_generic_port_probe(port); + if (ret) { dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); - return 1; + return ret; } priv = usb_get_serial_port_data(port); priv->chiptype = CT_CYPHIDCOM; return 0; -} /* cypress_hidcom_startup */ - +} -static int cypress_ca42v2_startup(struct usb_serial *serial) +static int cypress_ca42v2_port_probe(struct usb_serial_port *port) { struct cypress_private *priv; - struct usb_serial_port *port = serial->port[0]; + int ret; - if (generic_startup(serial)) { + ret = cypress_generic_port_probe(port); + if (ret) { dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); - return 1; + return ret; } priv = usb_get_serial_port_data(port); priv->chiptype = CT_CA42V2; return 0; -} /* cypress_ca42v2_startup */ - +} -static void cypress_release(struct usb_serial *serial) +static int cypress_port_remove(struct usb_serial_port *port) { struct cypress_private *priv; - /* all open ports are closed at this point */ - priv = usb_get_serial_port_data(serial->port[0]); + priv = usb_get_serial_port_data(port); - if (priv) { - kfifo_free(&priv->write_fifo); - kfree(priv); - } -} + kfifo_free(&priv->write_fifo); + kfree(priv); + return 0; +} static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port) { -- cgit v1.2.3-70-g09d2 From 95940a04bfe8a4d246f4ca17c6a3b00148bdead0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:35:02 +0200 Subject: USB: kobil_sct: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/kobil_sct.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 5c4d2fbd4e1..c9ca7a5b12e 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -54,8 +54,8 @@ /* Function prototypes */ -static int kobil_startup(struct usb_serial *serial); -static void kobil_release(struct usb_serial *serial); +static int kobil_port_probe(struct usb_serial_port *probe); +static int kobil_port_remove(struct usb_serial_port *probe); static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port); static void kobil_close(struct usb_serial_port *port); static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -89,8 +89,8 @@ static struct usb_serial_driver kobil_device = { .description = "KOBIL USB smart card terminal", .id_table = id_table, .num_ports = 1, - .attach = kobil_startup, - .release = kobil_release, + .port_probe = kobil_port_probe, + .port_remove = kobil_port_remove, .ioctl = kobil_ioctl, .set_termios = kobil_set_termios, .init_termios = kobil_init_termios, @@ -117,9 +117,10 @@ struct kobil_private { }; -static int kobil_startup(struct usb_serial *serial) +static int kobil_port_probe(struct usb_serial_port *port) { int i; + struct usb_serial *serial = port->serial; struct kobil_private *priv; struct usb_device *pdev; struct usb_host_config *actconfig; @@ -149,7 +150,7 @@ static int kobil_startup(struct usb_serial *serial) dev_dbg(&serial->dev->dev, "KOBIL KAAN SIM detected\n"); break; } - usb_set_serial_port_data(serial->port[0], priv); + usb_set_serial_port_data(port, priv); /* search for the necessary endpoints */ pdev = serial->dev; @@ -179,12 +180,14 @@ static int kobil_startup(struct usb_serial *serial) } -static void kobil_release(struct usb_serial *serial) +static int kobil_port_remove(struct usb_serial_port *port) { - int i; + struct kobil_private *priv; - for (i = 0; i < serial->num_ports; ++i) - kfree(usb_get_serial_port_data(serial->port[i])); + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } static void kobil_init_termios(struct tty_struct *tty) -- cgit v1.2.3-70-g09d2 From c27f3efc56080a246f6ab7f57f0a6f56d256d769 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:34:57 +0200 Subject: USB: io_edgeport: fix port-data memory leak Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_edgeport.c | 54 +++++++++++++++++++++------------------- drivers/usb/serial/io_tables.h | 8 ++++++ 2 files changed, 37 insertions(+), 25 deletions(-) diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 8e6faaf3580..5acc0d13864 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -225,6 +225,8 @@ static int edge_get_icount(struct tty_struct *tty, static int edge_startup(struct usb_serial *serial); static void edge_disconnect(struct usb_serial *serial); static void edge_release(struct usb_serial *serial); +static int edge_port_probe(struct usb_serial_port *port); +static int edge_port_remove(struct usb_serial_port *port); #include "io_tables.h" /* all of the devices that this driver supports */ @@ -2875,10 +2877,9 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) static int edge_startup(struct usb_serial *serial) { struct edgeport_serial *edge_serial; - struct edgeport_port *edge_port; struct usb_device *dev; struct device *ddev = &serial->dev->dev; - int i, j; + int i; int response; bool interrupt_in_found; bool bulk_in_found; @@ -2961,25 +2962,6 @@ static int edge_startup(struct usb_serial *serial) /* we set up the pointers to the endpoints in the edge_open function, * as the structures aren't created yet. */ - /* set up our port private structures */ - for (i = 0; i < serial->num_ports; ++i) { - edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL); - if (edge_port == NULL) { - dev_err(ddev, "%s - Out of memory\n", __func__); - for (j = 0; j < i; ++j) { - kfree(usb_get_serial_port_data(serial->port[j])); - usb_set_serial_port_data(serial->port[j], - NULL); - } - usb_set_serial_data(serial, NULL); - kfree(edge_serial); - return -ENOMEM; - } - spin_lock_init(&edge_port->ep_lock); - edge_port->port = serial->port[i]; - usb_set_serial_port_data(serial->port[i], edge_port); - } - response = 0; if (edge_serial->is_epic) { @@ -3120,14 +3102,36 @@ static void edge_disconnect(struct usb_serial *serial) static void edge_release(struct usb_serial *serial) { struct edgeport_serial *edge_serial = usb_get_serial_data(serial); - int i; - - for (i = 0; i < serial->num_ports; ++i) - kfree(usb_get_serial_port_data(serial->port[i])); kfree(edge_serial); } +static int edge_port_probe(struct usb_serial_port *port) +{ + struct edgeport_port *edge_port; + + edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL); + if (!edge_port) + return -ENOMEM; + + spin_lock_init(&edge_port->ep_lock); + edge_port->port = port; + + usb_set_serial_port_data(port, edge_port); + + return 0; +} + +static int edge_port_remove(struct usb_serial_port *port) +{ + struct edgeport_port *edge_port; + + edge_port = usb_get_serial_port_data(port); + kfree(edge_port); + + return 0; +} + module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h index 350afddb55b..1511dd0ad32 100644 --- a/drivers/usb/serial/io_tables.h +++ b/drivers/usb/serial/io_tables.h @@ -110,6 +110,8 @@ static struct usb_serial_driver edgeport_2port_device = { .attach = edge_startup, .disconnect = edge_disconnect, .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, @@ -139,6 +141,8 @@ static struct usb_serial_driver edgeport_4port_device = { .attach = edge_startup, .disconnect = edge_disconnect, .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, @@ -168,6 +172,8 @@ static struct usb_serial_driver edgeport_8port_device = { .attach = edge_startup, .disconnect = edge_disconnect, .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, @@ -197,6 +203,8 @@ static struct usb_serial_driver epic_device = { .attach = edge_startup, .disconnect = edge_disconnect, .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, -- cgit v1.2.3-70-g09d2 From 3124d1d71d3df59d40b913b5481df58099e811d1 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:34:56 +0200 Subject: USB: f81232: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/f81232.c | 43 +++++++++++++++++-------------------------- 1 file changed, 17 insertions(+), 26 deletions(-) diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c index 244477107e2..6e4eb57d017 100644 --- a/drivers/usb/serial/f81232.c +++ b/drivers/usb/serial/f81232.c @@ -318,39 +318,30 @@ static int f81232_ioctl(struct tty_struct *tty, return -ENOIOCTLCMD; } -static int f81232_startup(struct usb_serial *serial) +static int f81232_port_probe(struct usb_serial_port *port) { struct f81232_private *priv; - int i; - for (i = 0; i < serial->num_ports; ++i) { - priv = kzalloc(sizeof(struct f81232_private), GFP_KERNEL); - if (!priv) - goto cleanup; - spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->delta_msr_wait); - usb_set_serial_port_data(serial->port[i], priv); - } - return 0; + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; -cleanup: - for (--i; i >= 0; --i) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - usb_set_serial_port_data(serial->port[i], NULL); - } - return -ENOMEM; + spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->delta_msr_wait); + + usb_set_serial_port_data(port, priv); + + return 0; } -static void f81232_release(struct usb_serial *serial) +static int f81232_port_remove(struct usb_serial_port *port) { - int i; struct f81232_private *priv; - for (i = 0; i < serial->num_ports; ++i) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - } + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } static struct usb_serial_driver f81232_device = { @@ -373,8 +364,8 @@ static struct usb_serial_driver f81232_device = { .tiocmset = f81232_tiocmset, .process_read_urb = f81232_process_read_urb, .read_int_callback = f81232_read_int_callback, - .attach = f81232_startup, - .release = f81232_release, + .port_probe = f81232_port_probe, + .port_remove = f81232_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { -- cgit v1.2.3-70-g09d2 From 94ab71ce288921490ca857e25ad174e1921b1e29 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:35:00 +0200 Subject: USB: keyspan_pda: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/keyspan_pda.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index ca43ecb4a2b..bb87e29c4ac 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -713,29 +713,33 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw"); MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw"); #endif -static int keyspan_pda_startup(struct usb_serial *serial) +static int keyspan_pda_port_probe(struct usb_serial_port *port) { struct keyspan_pda_private *priv; - /* allocate the private data structures for all ports. Well, for all - one ports. */ - priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL); if (!priv) - return 1; /* error */ - usb_set_serial_port_data(serial->port[0], priv); - init_waitqueue_head(&serial->port[0]->write_wait); + return -ENOMEM; + INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write); INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle); - priv->serial = serial; - priv->port = serial->port[0]; + priv->serial = port->serial; + priv->port = port; + + usb_set_serial_port_data(port, priv); + return 0; } -static void keyspan_pda_release(struct usb_serial *serial) +static int keyspan_pda_port_remove(struct usb_serial_port *port) { - kfree(usb_get_serial_port_data(serial->port[0])); + struct keyspan_pda_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } #ifdef KEYSPAN @@ -786,8 +790,8 @@ static struct usb_serial_driver keyspan_pda_device = { .break_ctl = keyspan_pda_break_ctl, .tiocmget = keyspan_pda_tiocmget, .tiocmset = keyspan_pda_tiocmset, - .attach = keyspan_pda_startup, - .release = keyspan_pda_release, + .port_probe = keyspan_pda_port_probe, + .port_remove = keyspan_pda_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { -- cgit v1.2.3-70-g09d2 From 003615302a16579531932576bcd9582ddeba9018 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:34:58 +0200 Subject: USB: io_ti: fix port-data memory leak Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_ti.c | 91 +++++++++++++++++++++++----------------------- 1 file changed, 45 insertions(+), 46 deletions(-) diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index a2209cd4509..9ae65d679f0 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2532,12 +2532,7 @@ static void edge_break(struct tty_struct *tty, int break_state) static int edge_startup(struct usb_serial *serial) { struct edgeport_serial *edge_serial; - struct edgeport_port *edge_port; - struct usb_device *dev; int status; - int i; - - dev = serial->dev; /* create our private serial structure */ edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); @@ -2555,40 +2550,7 @@ static int edge_startup(struct usb_serial *serial) return status; } - /* set up our port private structures */ - for (i = 0; i < serial->num_ports; ++i) { - edge_port = kzalloc(sizeof(struct edgeport_port), GFP_KERNEL); - if (edge_port == NULL) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", - __func__); - goto cleanup; - } - spin_lock_init(&edge_port->ep_lock); - if (kfifo_alloc(&edge_port->write_fifo, EDGE_OUT_BUF_SIZE, - GFP_KERNEL)) { - dev_err(&serial->dev->dev, "%s - Out of memory\n", - __func__); - kfree(edge_port); - goto cleanup; - } - edge_port->port = serial->port[i]; - edge_port->edge_serial = edge_serial; - usb_set_serial_port_data(serial->port[i], edge_port); - edge_port->bUartMode = default_uart_mode; - } - return 0; - -cleanup: - for (--i; i >= 0; --i) { - edge_port = usb_get_serial_port_data(serial->port[i]); - kfifo_free(&edge_port->write_fifo); - kfree(edge_port); - usb_set_serial_port_data(serial->port[i], NULL); - } - kfree(edge_serial); - usb_set_serial_data(serial, NULL); - return -ENOMEM; } static void edge_disconnect(struct usb_serial *serial) @@ -2597,17 +2559,54 @@ static void edge_disconnect(struct usb_serial *serial) static void edge_release(struct usb_serial *serial) { - int i; + kfree(usb_get_serial_data(serial)); +} + +static int edge_port_probe(struct usb_serial_port *port) +{ struct edgeport_port *edge_port; + int ret; - for (i = 0; i < serial->num_ports; ++i) { - edge_port = usb_get_serial_port_data(serial->port[i]); + edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL); + if (!edge_port) + return -ENOMEM; + + ret = kfifo_alloc(&edge_port->write_fifo, EDGE_OUT_BUF_SIZE, + GFP_KERNEL); + if (ret) { + kfree(edge_port); + return -ENOMEM; + } + + ret = edge_create_sysfs_attrs(port); + if (ret) { kfifo_free(&edge_port->write_fifo); kfree(edge_port); + return ret; } - kfree(usb_get_serial_data(serial)); + + spin_lock_init(&edge_port->ep_lock); + edge_port->port = port; + edge_port->edge_serial = usb_get_serial_data(port->serial); + edge_port->bUartMode = default_uart_mode; + + usb_set_serial_port_data(port, edge_port); + + return 0; } +static int edge_port_remove(struct usb_serial_port *port) +{ + struct edgeport_port *edge_port; + + edge_port = usb_get_serial_port_data(port); + + edge_remove_sysfs_attrs(port); + kfifo_free(&edge_port->write_fifo); + kfree(edge_port); + + return 0; +} /* Sysfs Attributes */ @@ -2667,8 +2666,8 @@ static struct usb_serial_driver edgeport_1port_device = { .attach = edge_startup, .disconnect = edge_disconnect, .release = edge_release, - .port_probe = edge_create_sysfs_attrs, - .port_remove = edge_remove_sysfs_attrs, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, @@ -2698,8 +2697,8 @@ static struct usb_serial_driver edgeport_2port_device = { .attach = edge_startup, .disconnect = edge_disconnect, .release = edge_release, - .port_probe = edge_create_sysfs_attrs, - .port_remove = edge_remove_sysfs_attrs, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, -- cgit v1.2.3-70-g09d2 From 99a6f73c495c420df826e5b267fb073fd6766fc3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:35:01 +0200 Subject: USB: kl5kusb105: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/kl5kusb105.c | 68 +++++++++++++++-------------------------- 1 file changed, 24 insertions(+), 44 deletions(-) diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index 3f6d7376c02..1f4517864cd 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -60,8 +60,8 @@ /* * Function prototypes */ -static int klsi_105_startup(struct usb_serial *serial); -static void klsi_105_release(struct usb_serial *serial); +static int klsi_105_port_probe(struct usb_serial_port *port); +static int klsi_105_port_remove(struct usb_serial_port *port); static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port); static void klsi_105_close(struct usb_serial_port *port); static void klsi_105_set_termios(struct tty_struct *tty, @@ -99,8 +99,8 @@ static struct usb_serial_driver kl5kusb105d_device = { /*.break_ctl = klsi_105_break_ctl,*/ .tiocmget = klsi_105_tiocmget, .tiocmset = klsi_105_tiocmset, - .attach = klsi_105_startup, - .release = klsi_105_release, + .port_probe = klsi_105_port_probe, + .port_remove = klsi_105_port_remove, .throttle = usb_serial_generic_throttle, .unthrottle = usb_serial_generic_unthrottle, .process_read_urb = klsi_105_process_read_urb, @@ -223,60 +223,40 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, * Driver's tty interface functions */ -static int klsi_105_startup(struct usb_serial *serial) +static int klsi_105_port_probe(struct usb_serial_port *port) { struct klsi_105_private *priv; - int i; - /* check if we support the product id (see keyspan.c) - * FIXME - */ + priv = kmalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; - /* allocate the private data structure */ - for (i = 0; i < serial->num_ports; i++) { - priv = kmalloc(sizeof(struct klsi_105_private), - GFP_KERNEL); - if (!priv) { - dev_dbg(&serial->interface->dev, - "%s - kmalloc for klsi_105_private failed.\n", - __func__); - i--; - goto err_cleanup; - } - /* set initial values for control structures */ - priv->cfg.pktlen = 5; - priv->cfg.baudrate = kl5kusb105a_sio_b9600; - priv->cfg.databits = kl5kusb105a_dtb_8; - priv->cfg.unknown1 = 0; - priv->cfg.unknown2 = 1; + /* set initial values for control structures */ + priv->cfg.pktlen = 5; + priv->cfg.baudrate = kl5kusb105a_sio_b9600; + priv->cfg.databits = kl5kusb105a_dtb_8; + priv->cfg.unknown1 = 0; + priv->cfg.unknown2 = 1; - priv->line_state = 0; + priv->line_state = 0; - usb_set_serial_port_data(serial->port[i], priv); + spin_lock_init(&priv->lock); - spin_lock_init(&priv->lock); + /* priv->termios is left uninitialized until port opening */ - /* priv->termios is left uninitialized until port opening */ - init_waitqueue_head(&serial->port[i]->write_wait); - } + usb_set_serial_port_data(port, priv); return 0; - -err_cleanup: - for (; i >= 0; i--) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - usb_set_serial_port_data(serial->port[i], NULL); - } - return -ENOMEM; } -static void klsi_105_release(struct usb_serial *serial) +static int klsi_105_port_remove(struct usb_serial_port *port) { - int i; + struct klsi_105_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); - for (i = 0; i < serial->num_ports; ++i) - kfree(usb_get_serial_port_data(serial->port[i])); + return 0; } static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) -- cgit v1.2.3-70-g09d2 From 53636555b9190f88320d9d46cf142f8797895456 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 13:34:59 +0200 Subject: USB: iuu_phoenix: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/iuu_phoenix.c | 62 ++++++++++++++-------------------------- 1 file changed, 22 insertions(+), 40 deletions(-) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 01da3ea36e8..959f71e31dc 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -72,63 +72,45 @@ struct iuu_private { u32 clk; }; - -static void iuu_free_buf(struct iuu_private *priv) -{ - kfree(priv->buf); - kfree(priv->writebuf); -} - -static int iuu_alloc_buf(struct usb_serial *serial, struct iuu_private *priv) -{ - priv->buf = kzalloc(256, GFP_KERNEL); - priv->writebuf = kzalloc(256, GFP_KERNEL); - if (!priv->buf || !priv->writebuf) { - iuu_free_buf(priv); - dev_dbg(&serial->dev->dev, "%s problem allocation buffer\n", __func__); - return -ENOMEM; - } - dev_dbg(&serial->dev->dev, "%s - Privates buffers allocation success\n", __func__); - return 0; -} - -static int iuu_startup(struct usb_serial *serial) +static int iuu_port_probe(struct usb_serial_port *port) { struct iuu_private *priv; priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL); - dev_dbg(&serial->dev->dev, "%s- priv allocation success\n", __func__); if (!priv) return -ENOMEM; - if (iuu_alloc_buf(serial, priv)) { + + priv->buf = kzalloc(256, GFP_KERNEL); + if (!priv->buf) { kfree(priv); return -ENOMEM; } + + priv->writebuf = kzalloc(256, GFP_KERNEL); + if (!priv->writebuf) { + kfree(priv->buf); + kfree(priv); + return -ENOMEM; + } + priv->vcc = vcc_default; spin_lock_init(&priv->lock); init_waitqueue_head(&priv->delta_msr_wait); - usb_set_serial_port_data(serial->port[0], priv); + + usb_set_serial_port_data(port, priv); + return 0; } -/* Release function */ -static void iuu_release(struct usb_serial *serial) +static int iuu_port_remove(struct usb_serial_port *port) { - struct usb_serial_port *port = serial->port[0]; struct iuu_private *priv = usb_get_serial_port_data(port); - if (!port) - return; - - if (priv) { - iuu_free_buf(priv); - dev_dbg(&port->dev, "%s - I will free all\n", __func__); - usb_set_serial_port_data(port, NULL); - dev_dbg(&port->dev, "%s - priv is not anymore in port structure\n", __func__); - kfree(priv); + kfree(priv->writebuf); + kfree(priv->buf); + kfree(priv); - dev_dbg(&port->dev, "%s priv is now kfree\n", __func__); - } + return 0; } static int iuu_tiocmset(struct tty_struct *tty, @@ -1225,8 +1207,8 @@ static struct usb_serial_driver iuu_device = { .tiocmset = iuu_tiocmset, .set_termios = iuu_set_termios, .init_termios = iuu_init_termios, - .attach = iuu_startup, - .release = iuu_release, + .port_probe = iuu_port_probe, + .port_remove = iuu_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { -- cgit v1.2.3-70-g09d2 From 289b076f89c2c3260e914dad18ae12f193ea86d5 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 16:31:32 +0200 Subject: USB: oti6858: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/oti6858.c | 68 ++++++++++++++++++-------------------------- 1 file changed, 28 insertions(+), 40 deletions(-) diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 933241f03fd..cee9a52ca89 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -137,8 +137,8 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty); static int oti6858_tiocmget(struct tty_struct *tty); static int oti6858_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); -static int oti6858_startup(struct usb_serial *serial); -static void oti6858_release(struct usb_serial *serial); +static int oti6858_port_probe(struct usb_serial_port *port); +static int oti6858_port_remove(struct usb_serial_port *port); /* device info */ static struct usb_serial_driver oti6858_device = { @@ -161,8 +161,8 @@ static struct usb_serial_driver oti6858_device = { .write_bulk_callback = oti6858_write_bulk_callback, .write_room = oti6858_write_room, .chars_in_buffer = oti6858_chars_in_buffer, - .attach = oti6858_startup, - .release = oti6858_release, + .port_probe = oti6858_port_probe, + .port_remove = oti6858_port_remove, }; static struct usb_serial_driver * const serial_drivers[] = { @@ -331,36 +331,33 @@ static void send_data(struct work_struct *work) usb_serial_port_softint(port); } -static int oti6858_startup(struct usb_serial *serial) +static int oti6858_port_probe(struct usb_serial_port *port) { - struct usb_serial_port *port = serial->port[0]; struct oti6858_private *priv; - int i; - - for (i = 0; i < serial->num_ports; ++i) { - priv = kzalloc(sizeof(struct oti6858_private), GFP_KERNEL); - if (!priv) - break; - - spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->intr_wait); -/* INIT_WORK(&priv->setup_work, setup_line, serial->port[i]); */ -/* INIT_WORK(&priv->write_work, send_data, serial->port[i]); */ - priv->port = port; - INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line); - INIT_DELAYED_WORK(&priv->delayed_write_work, send_data); - - usb_set_serial_port_data(serial->port[i], priv); - } - if (i == serial->num_ports) - return 0; - for (--i; i >= 0; --i) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - usb_set_serial_port_data(serial->port[i], NULL); - } - return -ENOMEM; + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->intr_wait); + priv->port = port; + INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line); + INIT_DELAYED_WORK(&priv->delayed_write_work, send_data); + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int oti6858_port_remove(struct usb_serial_port *port) +{ + struct oti6858_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -709,15 +706,6 @@ static int oti6858_ioctl(struct tty_struct *tty, return -ENOIOCTLCMD; } - -static void oti6858_release(struct usb_serial *serial) -{ - int i; - - for (i = 0; i < serial->num_ports; ++i) - kfree(usb_get_serial_port_data(serial->port[i])); -} - static void oti6858_read_int_callback(struct urb *urb) { struct usb_serial_port *port = urb->context; -- cgit v1.2.3-70-g09d2 From 51ef847df74632e7cfdf952afc3887de105b8b35 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 16:31:35 +0200 Subject: USB: ti_usb_3410_5052: fix port-data memory leak Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 88 +++++++++++++++++------------------ 1 file changed, 43 insertions(+), 45 deletions(-) diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 6f49392cda5..f2530d2ef3c 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -97,6 +97,8 @@ struct ti_device { static int ti_startup(struct usb_serial *serial); static void ti_release(struct usb_serial *serial); +static int ti_port_probe(struct usb_serial_port *port); +static int ti_port_remove(struct usb_serial_port *port); static int ti_open(struct tty_struct *tty, struct usb_serial_port *port); static void ti_close(struct usb_serial_port *port); static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -221,6 +223,8 @@ static struct usb_serial_driver ti_1port_device = { .num_ports = 1, .attach = ti_startup, .release = ti_release, + .port_probe = ti_port_probe, + .port_remove = ti_port_remove, .open = ti_open, .close = ti_close, .write = ti_write, @@ -249,6 +253,8 @@ static struct usb_serial_driver ti_2port_device = { .num_ports = 2, .attach = ti_startup, .release = ti_release, + .port_probe = ti_port_probe, + .port_remove = ti_port_remove, .open = ti_open, .close = ti_close, .write = ti_write, @@ -347,11 +353,8 @@ module_exit(ti_exit); static int ti_startup(struct usb_serial *serial) { struct ti_device *tdev; - struct ti_port *tport; struct usb_device *dev = serial->dev; int status; - int i; - dev_dbg(&dev->dev, "%s - product 0x%4X, num configurations %d, configuration value %d", @@ -399,42 +402,8 @@ static int ti_startup(struct usb_serial *serial) goto free_tdev; } - /* set up port structures */ - for (i = 0; i < serial->num_ports; ++i) { - tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL); - if (tport == NULL) { - dev_err(&dev->dev, "%s - out of memory\n", __func__); - status = -ENOMEM; - goto free_tports; - } - spin_lock_init(&tport->tp_lock); - tport->tp_uart_base_addr = (i == 0 ? - TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR); - tport->tp_closing_wait = closing_wait; - init_waitqueue_head(&tport->tp_msr_wait); - init_waitqueue_head(&tport->tp_write_wait); - if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, - GFP_KERNEL)) { - dev_err(&dev->dev, "%s - out of memory\n", __func__); - kfree(tport); - status = -ENOMEM; - goto free_tports; - } - tport->tp_port = serial->port[i]; - tport->tp_tdev = tdev; - usb_set_serial_port_data(serial->port[i], tport); - tport->tp_uart_mode = 0; /* default is RS232 */ - } - return 0; -free_tports: - for (--i; i >= 0; --i) { - tport = usb_get_serial_port_data(serial->port[i]); - kfifo_free(&tport->write_fifo); - kfree(tport); - usb_set_serial_port_data(serial->port[i], NULL); - } free_tdev: kfree(tdev); usb_set_serial_data(serial, NULL); @@ -444,21 +413,50 @@ free_tdev: static void ti_release(struct usb_serial *serial) { - int i; struct ti_device *tdev = usb_get_serial_data(serial); + + kfree(tdev); +} + +static int ti_port_probe(struct usb_serial_port *port) +{ struct ti_port *tport; - for (i = 0; i < serial->num_ports; ++i) { - tport = usb_get_serial_port_data(serial->port[i]); - if (tport) { - kfifo_free(&tport->write_fifo); - kfree(tport); - } + tport = kzalloc(sizeof(*tport), GFP_KERNEL); + if (!tport) + return -ENOMEM; + + spin_lock_init(&tport->tp_lock); + if (port == port->serial->port[0]) + tport->tp_uart_base_addr = TI_UART1_BASE_ADDR; + else + tport->tp_uart_base_addr = TI_UART2_BASE_ADDR; + tport->tp_closing_wait = closing_wait; + init_waitqueue_head(&tport->tp_msr_wait); + init_waitqueue_head(&tport->tp_write_wait); + if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, GFP_KERNEL)) { + kfree(tport); + return -ENOMEM; } + tport->tp_port = port; + tport->tp_tdev = usb_get_serial_data(port->serial); + tport->tp_uart_mode = 0; /* default is RS232 */ - kfree(tdev); + usb_set_serial_port_data(port, tport); + + return 0; } +static int ti_port_remove(struct usb_serial_port *port) +{ + struct ti_port *tport; + + tport = usb_get_serial_port_data(port); + kfifo_free(&tport->write_fifo); + kfree(tport); + + return 0; +} static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) { -- cgit v1.2.3-70-g09d2 From 638b9e15233c9570bce65301aa9877235316b9f0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 16:31:34 +0200 Subject: USB: ssu100: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ssu100.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 015810b3785..868d1e6852e 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -67,13 +67,6 @@ struct ssu100_port_private { struct async_icount icount; }; -static void ssu100_release(struct usb_serial *serial) -{ - struct ssu100_port_private *priv = usb_get_serial_port_data(*serial->port); - - kfree(priv); -} - static inline int ssu100_control_msg(struct usb_device *dev, u8 request, u16 data, u16 index) { @@ -441,22 +434,34 @@ static int ssu100_ioctl(struct tty_struct *tty, } static int ssu100_attach(struct usb_serial *serial) +{ + return ssu100_initdevice(serial->dev); +} + +static int ssu100_port_probe(struct usb_serial_port *port) { struct ssu100_port_private *priv; - struct usb_serial_port *port = *serial->port; priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (!priv) { - dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__, - sizeof(*priv)); + if (!priv) return -ENOMEM; - } spin_lock_init(&priv->status_lock); init_waitqueue_head(&priv->delta_msr_wait); + usb_set_serial_port_data(port, priv); - return ssu100_initdevice(serial->dev); + return 0; +} + +static int ssu100_port_remove(struct usb_serial_port *port) +{ + struct ssu100_port_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } static int ssu100_tiocmget(struct tty_struct *tty) @@ -647,7 +652,8 @@ static struct usb_serial_driver ssu100_device = { .open = ssu100_open, .close = ssu100_close, .attach = ssu100_attach, - .release = ssu100_release, + .port_probe = ssu100_port_probe, + .port_remove = ssu100_port_remove, .dtr_rts = ssu100_dtr_rts, .process_read_urb = ssu100_process_read_urb, .tiocmget = ssu100_tiocmget, -- cgit v1.2.3-70-g09d2 From bf90ff5f3b8f67e5b42df4ea4fd543f8010a2676 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 17 Oct 2012 16:31:33 +0200 Subject: USB: spcp8x5: fix port-data memory leak Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/spcp8x5.c | 46 +++++++++++++++++--------------------------- 1 file changed, 18 insertions(+), 28 deletions(-) diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 9716efe9295..769c137f897 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -157,13 +157,10 @@ struct spcp8x5_private { u8 line_status; }; -/* desc : when device plug in,this function would be called. - * thanks to usb_serial subsystem,then do almost every things for us. And what - * we should do just alloc the buffer */ -static int spcp8x5_startup(struct usb_serial *serial) +static int spcp8x5_port_probe(struct usb_serial_port *port) { + struct usb_serial *serial = port->serial; struct spcp8x5_private *priv; - int i; enum spcp8x5_type type = SPCP825_007_TYPE; u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); @@ -180,34 +177,27 @@ static int spcp8x5_startup(struct usb_serial *serial) type = SPCP825_PHILIP_TYPE; dev_dbg(&serial->dev->dev, "device type = %d\n", (int)type); - for (i = 0; i < serial->num_ports; ++i) { - priv = kzalloc(sizeof(struct spcp8x5_private), GFP_KERNEL); - if (!priv) - goto cleanup; + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; - spin_lock_init(&priv->lock); - init_waitqueue_head(&priv->delta_msr_wait); - priv->type = type; - usb_set_serial_port_data(serial->port[i] , priv); - } + spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->delta_msr_wait); + priv->type = type; + + usb_set_serial_port_data(port , priv); return 0; -cleanup: - for (--i; i >= 0; --i) { - priv = usb_get_serial_port_data(serial->port[i]); - kfree(priv); - usb_set_serial_port_data(serial->port[i] , NULL); - } - return -ENOMEM; } -/* call when the device plug out. free all the memory alloced by probe */ -static void spcp8x5_release(struct usb_serial *serial) +static int spcp8x5_port_remove(struct usb_serial_port *port) { - int i; + struct spcp8x5_private *priv; - for (i = 0; i < serial->num_ports; i++) - kfree(usb_get_serial_port_data(serial->port[i])); + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; } /* set the modem control line of the device. @@ -649,8 +639,8 @@ static struct usb_serial_driver spcp8x5_device = { .ioctl = spcp8x5_ioctl, .tiocmget = spcp8x5_tiocmget, .tiocmset = spcp8x5_tiocmset, - .attach = spcp8x5_startup, - .release = spcp8x5_release, + .port_probe = spcp8x5_port_probe, + .port_remove = spcp8x5_port_remove, .process_read_urb = spcp8x5_process_read_urb, }; -- cgit v1.2.3-70-g09d2 From 25c040c99b1e3f6d97ca3d993878549aac5fd2c8 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 7 Oct 2012 10:40:54 -0700 Subject: of: add stub of_get_child_by_name for non-OF builds Fixes build error on s3c6400_defconfig, introduced by commit 06455bbcab76e5f5225de5f38ab948d37a1c3587, "dt/s3c64xx/spi: Use of_get_child_by_name to get a named child". drivers/spi/spi-s3c64xx.c: In function 's3c64xx_get_slave_ctrldata': drivers/spi/spi-s3c64xx.c:838:2: error: implicit declaration of function 'of_get_child_by_name' [-Werror=implicit-function-declaration] Signed-off-by: Olof Johansson Signed-off-by: Rob Herring --- include/linux/of.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/linux/of.h b/include/linux/of.h index 72843b72a2b..b4e50d56fc7 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -331,6 +331,13 @@ static inline bool of_have_populated_dt(void) #define for_each_child_of_node(parent, child) \ while (0) +static inline struct device_node *of_get_child_by_name( + const struct device_node *node, + const char *name) +{ + return NULL; +} + static inline int of_get_child_count(const struct device_node *np) { return 0; -- cgit v1.2.3-70-g09d2 From 47b1e689db637ca6778c49d6c971af928cf0fb1d Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Mon, 8 Oct 2012 19:41:58 -0500 Subject: of/address: sparse fixes drivers/of/address.c:66:29: warning: incorrect type in argument 1 (different base types) drivers/of/address.c:66:29: expected restricted __be32 const [usertype] *cell drivers/of/address.c:66:29: got unsigned int [usertype] *addr drivers/of/address.c:87:32: warning: incorrect type in argument 1 (different base types) drivers/of/address.c:87:32: expected restricted __be32 const [usertype] *cell drivers/of/address.c:87:32: got unsigned int [usertype] *addr drivers/of/address.c:91:30: warning: incorrect type in assignment (different base types) drivers/of/address.c:91:30: expected unsigned int [unsigned] [usertype] drivers/of/address.c:91:30: got restricted __be32 [usertype] drivers/of/address.c:92:22: warning: incorrect type in assignment (different base types) drivers/of/address.c:92:22: expected unsigned int [unsigned] [usertype] drivers/of/address.c:92:22: got restricted __be32 [usertype] drivers/of/address.c:147:35: warning: incorrect type in argument 1 (different base types) drivers/of/address.c:147:35: expected restricted __be32 const [usertype] *addr drivers/of/address.c:147:35: got unsigned int [usertype] *addr drivers/of/address.c:157:34: warning: incorrect type in argument 1 (different base types) drivers/of/address.c:157:34: expected restricted __be32 const [usertype] *cell drivers/of/address.c:157:34: got unsigned int [usertype] * drivers/of/address.c:256:29: warning: restricted __be32 degrades to integer drivers/of/address.c:256:36: warning: restricted __be32 degrades to integer drivers/of/address.c:262:34: warning: incorrect type in argument 1 (different base types) drivers/of/address.c:262:34: expected restricted __be32 const [usertype] *cell drivers/of/address.c:262:34: got unsigned int [usertype] * drivers/of/address.c:372:41: warning: incorrect type in argument 1 (different base types) drivers/of/address.c:372:41: expected restricted __be32 const [usertype] *cell drivers/of/address.c:372:41: got unsigned int [usertype] *addr drivers/of/address.c:395:53: warning: incorrect type in argument 2 (different base types) drivers/of/address.c:395:53: expected restricted __be32 const [usertype] *addr drivers/of/address.c:395:53: got unsigned int [usertype] *addr drivers/of/address.c:443:50: warning: incorrect type in argument 2 (different base types) drivers/of/address.c:443:50: expected restricted __be32 const [usertype] *addr drivers/of/address.c:443:50: got unsigned int * drivers/of/address.c:455:49: warning: incorrect type in argument 1 (different base types) drivers/of/address.c:455:49: expected restricted __be32 const [usertype] *cell drivers/of/address.c:455:49: got unsigned int * drivers/of/address.c:480:60: warning: incorrect type in argument 2 (different base types) drivers/of/address.c:480:60: expected restricted __be32 const [usertype] *addr drivers/of/address.c:480:60: got unsigned int * drivers/of/address.c:412:5: warning: symbol '__of_translate_address' was not declared. Should it be static? drivers/of/address.c:520:14: error: symbol 'of_get_address' redeclared with different type (originally declared at include/linux/of_address.h:22) - different base types Signed-off-by: Kim Phillips Signed-off-by: Rob Herring --- drivers/of/address.c | 24 ++++++++++++------------ include/linux/of_address.h | 4 ++-- 2 files changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/of/address.c b/drivers/of/address.c index 72e496f1e9b..0125524c08c 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -37,9 +37,9 @@ struct of_bus { int (*match)(struct device_node *parent); void (*count_cells)(struct device_node *child, int *addrc, int *sizec); - u64 (*map)(u32 *addr, const __be32 *range, + u64 (*map)(__be32 *addr, const __be32 *range, int na, int ns, int pna); - int (*translate)(u32 *addr, u64 offset, int na); + int (*translate)(__be32 *addr, u64 offset, int na); unsigned int (*get_flags)(const __be32 *addr); }; @@ -56,7 +56,7 @@ static void of_bus_default_count_cells(struct device_node *dev, *sizec = of_n_size_cells(dev); } -static u64 of_bus_default_map(u32 *addr, const __be32 *range, +static u64 of_bus_default_map(__be32 *addr, const __be32 *range, int na, int ns, int pna) { u64 cp, s, da; @@ -82,7 +82,7 @@ static u64 of_bus_default_map(u32 *addr, const __be32 *range, return da - cp; } -static int of_bus_default_translate(u32 *addr, u64 offset, int na) +static int of_bus_default_translate(__be32 *addr, u64 offset, int na) { u64 a = of_read_number(addr, na); memset(addr, 0, na * 4); @@ -138,7 +138,7 @@ static unsigned int of_bus_pci_get_flags(const __be32 *addr) return flags; } -static u64 of_bus_pci_map(u32 *addr, const __be32 *range, int na, int ns, +static u64 of_bus_pci_map(__be32 *addr, const __be32 *range, int na, int ns, int pna) { u64 cp, s, da; @@ -165,7 +165,7 @@ static u64 of_bus_pci_map(u32 *addr, const __be32 *range, int na, int ns, return da - cp; } -static int of_bus_pci_translate(u32 *addr, u64 offset, int na) +static int of_bus_pci_translate(__be32 *addr, u64 offset, int na) { return of_bus_default_translate(addr + 1, offset, na - 1); } @@ -247,7 +247,7 @@ static void of_bus_isa_count_cells(struct device_node *child, *sizec = 1; } -static u64 of_bus_isa_map(u32 *addr, const __be32 *range, int na, int ns, +static u64 of_bus_isa_map(__be32 *addr, const __be32 *range, int na, int ns, int pna) { u64 cp, s, da; @@ -270,7 +270,7 @@ static u64 of_bus_isa_map(u32 *addr, const __be32 *range, int na, int ns, return da - cp; } -static int of_bus_isa_translate(u32 *addr, u64 offset, int na) +static int of_bus_isa_translate(__be32 *addr, u64 offset, int na) { return of_bus_default_translate(addr + 1, offset, na - 1); } @@ -338,7 +338,7 @@ static struct of_bus *of_match_bus(struct device_node *np) } static int of_translate_one(struct device_node *parent, struct of_bus *bus, - struct of_bus *pbus, u32 *addr, + struct of_bus *pbus, __be32 *addr, int na, int ns, int pna, const char *rprop) { const __be32 *ranges; @@ -409,12 +409,12 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus, * that can be mapped to a cpu physical address). This is not really specified * that way, but this is traditionally the way IBM at least do things */ -u64 __of_translate_address(struct device_node *dev, const __be32 *in_addr, - const char *rprop) +static u64 __of_translate_address(struct device_node *dev, + const __be32 *in_addr, const char *rprop) { struct device_node *parent = NULL; struct of_bus *bus, *pbus; - u32 addr[OF_MAX_ADDR_CELLS]; + __be32 addr[OF_MAX_ADDR_CELLS]; int na, ns, pna, pns; u64 result = OF_BAD_ADDR; diff --git a/include/linux/of_address.h b/include/linux/of_address.h index c3cdc1025c3..a1984dd037d 100644 --- a/include/linux/of_address.h +++ b/include/linux/of_address.h @@ -19,7 +19,7 @@ extern void __iomem *of_iomap(struct device_node *device, int index); * the address space flags too. The PCI version uses a BAR number * instead of an absolute index */ -extern const u32 *of_get_address(struct device_node *dev, int index, +extern const __be32 *of_get_address(struct device_node *dev, int index, u64 *size, unsigned int *flags); #ifndef pci_address_to_pio @@ -44,7 +44,7 @@ static inline void __iomem *of_iomap(struct device_node *device, int index) { return NULL; } -static inline const u32 *of_get_address(struct device_node *dev, int index, +static inline const __be32 *of_get_address(struct device_node *dev, int index, u64 *size, unsigned int *flags) { return NULL; -- cgit v1.2.3-70-g09d2 From d2e4151821dc4d1db414de287f6e3503c1718815 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Mon, 8 Oct 2012 19:42:04 -0500 Subject: of/irq: sparse fixes drivers/of/irq.c:195:57: warning: restricted __be32 degrades to integer drivers/of/irq.c:196:51: warning: restricted __be32 degrades to integer drivers/of/irq.c:199:57: warning: restricted __be32 degrades to integer drivers/of/irq.c:201:58: warning: restricted __be32 degrades to integer drivers/of/irq.c:470:37: warning: incorrect type in assignment (different modifiers) drivers/of/irq.c:470:37: expected int ( *[usertype] irq_init_cb )( ... ) drivers/of/irq.c:470:37: got void const *const data drivers/of/irq.c:96:5: error: symbol 'of_irq_map_raw' redeclared with different type (originally declared at include/linux/of_irq.h:61) - incompatible argument 2 (different base types) drivers/of/of_pci_irq.c:91:40: warning: incorrect type in argument 2 (different base types) drivers/of/of_pci_irq.c:91:40: expected unsigned int const [usertype] *intspec drivers/of/of_pci_irq.c:91:40: got restricted __be32 * drivers/of/of_pci_irq.c:91:53: warning: incorrect type in argument 4 (different base types) drivers/of/of_pci_irq.c:91:53: expected unsigned int const [usertype] *addr drivers/of/of_pci_irq.c:91:53: got restricted __be32 * Signed-off-by: Kim Phillips Signed-off-by: Rob Herring --- drivers/of/irq.c | 8 +++++--- include/linux/of_irq.h | 4 ++-- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/of/irq.c b/drivers/of/irq.c index a23ec777999..a3c1c5aae6a 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -192,11 +192,13 @@ int of_irq_map_raw(struct device_node *parent, const __be32 *intspec, /* Compare specifiers */ match = 1; for (i = 0; i < addrsize && match; ++i) { - u32 mask = imask ? imask[i] : 0xffffffffu; + __be32 mask = imask ? imask[i] + : cpu_to_be32(0xffffffffu); match = ((addr[i] ^ imap[i]) & mask) == 0; } for (; i < (addrsize + intsize) && match; ++i) { - u32 mask = imask ? imask[i] : 0xffffffffu; + __be32 mask = imask ? imask[i] + : cpu_to_be32(0xffffffffu); match = ((intspec[i-addrsize] ^ imap[i]) & mask) == 0; } @@ -465,7 +467,7 @@ void __init of_irq_init(const struct of_device_id *matches) pr_debug("of_irq_init: init %s @ %p, parent %p\n", match->compatible, desc->dev, desc->interrupt_parent); - irq_init_cb = match->data; + irq_init_cb = (of_irq_init_cb_t)match->data; ret = irq_init_cb(desc->dev, desc->interrupt_parent); if (ret) { kfree(desc); diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h index b8e24112520..535cecf1e02 100644 --- a/include/linux/of_irq.h +++ b/include/linux/of_irq.h @@ -58,8 +58,8 @@ static inline int of_irq_map_oldworld(struct device_node *device, int index, #endif /* CONFIG_PPC32 && CONFIG_PPC_PMAC */ -extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec, - u32 ointsize, const u32 *addr, +extern int of_irq_map_raw(struct device_node *parent, const __be32 *intspec, + u32 ointsize, const __be32 *addr, struct of_irq *out_irq); extern int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq); -- cgit v1.2.3-70-g09d2 From 24fb530f990394915e8daceeca2a4a4e929e156f Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Mon, 8 Oct 2012 19:42:11 -0500 Subject: of/platform: sparse fix drivers/of/platform.c:110:59: warning: incorrect type in argument 2 (different base types) drivers/of/platform.c:110:59: expected restricted __be32 const [usertype] *addr drivers/of/platform.c:110:59: got unsigned int const [usertype] *[assigned] reg Signed-off-by: Kim Phillips Signed-off-by: Rob Herring --- drivers/of/platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 9bdeaf30b17..b80891b4381 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -76,7 +76,7 @@ void of_device_make_bus_id(struct device *dev) { static atomic_t bus_no_reg_magic; struct device_node *node = dev->of_node; - const u32 *reg; + const __be32 *reg; u64 addr; const __be32 *addrp; int magic; -- cgit v1.2.3-70-g09d2 From 205a8eb7ce713c7f1722297dd97d19dcea6f266c Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 8 Oct 2012 16:15:26 -0600 Subject: dtc: fix for_each_*() to skip first object if deleted The previous definition of for_each_*() would always include the very first object within the list, irrespective of whether it was marked deleted, since the deleted flag was not checked on the first object, but only on any "next" object. Fix for_each_*() to check the deleted flag in the loop body every iteration to correct this. (upstream dtc commit 1762ab42ef77db7ab2776d0d6cba3515150f518a) Signed-off-by: Stephen Warren Signed-off-by: Rob Herring --- scripts/dtc/dtc.h | 44 ++++++++++---------------------------------- 1 file changed, 10 insertions(+), 34 deletions(-) diff --git a/scripts/dtc/dtc.h b/scripts/dtc/dtc.h index d501c8605f2..3e42a071070 100644 --- a/scripts/dtc/dtc.h +++ b/scripts/dtc/dtc.h @@ -161,51 +161,27 @@ struct node { struct label *labels; }; -static inline struct label *for_each_label_next(struct label *l) -{ - do { - l = l->next; - } while (l && l->deleted); - - return l; -} - -#define for_each_label(l0, l) \ - for ((l) = (l0); (l); (l) = for_each_label_next(l)) - #define for_each_label_withdel(l0, l) \ for ((l) = (l0); (l); (l) = (l)->next) -static inline struct property *for_each_property_next(struct property *p) -{ - do { - p = p->next; - } while (p && p->deleted); - - return p; -} - -#define for_each_property(n, p) \ - for ((p) = (n)->proplist; (p); (p) = for_each_property_next(p)) +#define for_each_label(l0, l) \ + for_each_label_withdel(l0, l) \ + if (!(l)->deleted) #define for_each_property_withdel(n, p) \ for ((p) = (n)->proplist; (p); (p) = (p)->next) -static inline struct node *for_each_child_next(struct node *c) -{ - do { - c = c->next_sibling; - } while (c && c->deleted); - - return c; -} - -#define for_each_child(n, c) \ - for ((c) = (n)->children; (c); (c) = for_each_child_next(c)) +#define for_each_property(n, p) \ + for_each_property_withdel(n, p) \ + if (!(p)->deleted) #define for_each_child_withdel(n, c) \ for ((c) = (n)->children; (c); (c) = (c)->next_sibling) +#define for_each_child(n, c) \ + for_each_child_withdel(n, c) \ + if (!(c)->deleted) + void add_label(struct label **labels, char *label); void delete_labels(struct label **labels); -- cgit v1.2.3-70-g09d2 From d7c4660c12adc5c66351253af381259686fa08a4 Mon Sep 17 00:00:00 2001 From: Bill Pemberton Date: Tue, 9 Oct 2012 14:18:19 -0400 Subject: staging: dgrp: check for NULL pointer in (un)register_proc_table register_proc_table and unregister_proc_table didn't deal with the possibility that the *table pointer could be NULL. Check for this and return if table is NULL. Reported-by: Fengguang Wu Signed-off-by: Bill Pemberton Signed-off-by: Greg Kroah-Hartman --- drivers/staging/dgrp/dgrp_specproc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/staging/dgrp/dgrp_specproc.c b/drivers/staging/dgrp/dgrp_specproc.c index a5840e7d666..24327c3bad8 100644 --- a/drivers/staging/dgrp/dgrp_specproc.c +++ b/drivers/staging/dgrp/dgrp_specproc.c @@ -229,6 +229,9 @@ static void register_proc_table(struct dgrp_proc_entry *table, int len; mode_t mode; + if (table == NULL) + return; + for (; table->id; table++) { /* Can't do anything without a proc name. */ if (!table->name) @@ -297,6 +300,9 @@ static void unregister_proc_table(struct dgrp_proc_entry *table, struct proc_dir_entry *de; struct nd_struct *tmp; + if (table == NULL) + return; + list_for_each_entry(tmp, &nd_struct_list, list) { if ((table == dgrp_net_table) && (tmp->nd_net_de)) { unregister_dgrp_device(tmp->nd_net_de); -- cgit v1.2.3-70-g09d2 From 178e485a0ebbfdb7165b4363d8fea2a07d650c0b Mon Sep 17 00:00:00 2001 From: Bill Pemberton Date: Tue, 9 Oct 2012 14:18:20 -0400 Subject: staging: dgrp: check return value of alloc_tty_driver alloc_tty_driver was always assumed to succeed. Add code to check the return value and return -ENOMEM if alloc_tty_driver fails. Reported-by: Fengguang Wu Signed-off-by: Bill Pemberton Signed-off-by: Greg Kroah-Hartman --- drivers/staging/dgrp/dgrp_tty.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/staging/dgrp/dgrp_tty.c b/drivers/staging/dgrp/dgrp_tty.c index 72f6fcfa987..e125b03598d 100644 --- a/drivers/staging/dgrp/dgrp_tty.c +++ b/drivers/staging/dgrp/dgrp_tty.c @@ -3173,6 +3173,9 @@ dgrp_tty_init(struct nd_struct *nd) */ nd->nd_serial_ttdriver = alloc_tty_driver(CHAN_MAX); + if (!nd->nd_serial_ttdriver) + return -ENOMEM; + sprintf(nd->nd_serial_name, "tty_dgrp_%s_", id); nd->nd_serial_ttdriver->owner = THIS_MODULE; @@ -3232,6 +3235,9 @@ dgrp_tty_init(struct nd_struct *nd) } nd->nd_callout_ttdriver = alloc_tty_driver(CHAN_MAX); + if (!nd->nd_callout_ttdriver) + return -ENOMEM; + sprintf(nd->nd_callout_name, "cu_dgrp_%s_", id); nd->nd_callout_ttdriver->owner = THIS_MODULE; @@ -3269,6 +3275,9 @@ dgrp_tty_init(struct nd_struct *nd) nd->nd_xprint_ttdriver = alloc_tty_driver(CHAN_MAX); + if (!nd->nd_xprint_ttdriver) + return -ENOMEM; + sprintf(nd->nd_xprint_name, "pr_dgrp_%s_", id); nd->nd_xprint_ttdriver->owner = THIS_MODULE; -- cgit v1.2.3-70-g09d2 From 43c422eda99b894f18d1cca17bcd2401efaf7bd0 Mon Sep 17 00:00:00 2001 From: John Johansen Date: Wed, 17 Oct 2012 13:29:33 -0700 Subject: apparmor: fix apparmor OOPS in audit_log_untrustedstring+0x1c/0x40 The capability defines have moved causing the auto generated names of capabilities that apparmor uses in logging to be incorrect. Fix the autogenerated table source to uapi/linux/capability.h Reported-by: YanHong Reported-by: Krzysztof Kolasa Analyzed-by: Al Viro Signed-off-by: John Johansen Acked-by: David Howells Acked-by: James Morris Signed-off-by: Linus Torvalds --- security/apparmor/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/apparmor/Makefile b/security/apparmor/Makefile index 7b3021cebbe..5706b74c857 100644 --- a/security/apparmor/Makefile +++ b/security/apparmor/Makefile @@ -57,7 +57,7 @@ cmd_make-rlim = echo "static const char *const rlim_names[RLIM_NLIMITS] = {" \ $(obj)/capability.o : $(obj)/capability_names.h $(obj)/resource.o : $(obj)/rlim_names.h -$(obj)/capability_names.h : $(srctree)/include/linux/capability.h \ +$(obj)/capability_names.h : $(srctree)/include/uapi/linux/capability.h \ $(src)/Makefile $(call cmd,make-caps) $(obj)/rlim_names.h : $(srctree)/include/uapi/asm-generic/resource.h \ -- cgit v1.2.3-70-g09d2 From 72523d8082df3d89bffe30cbc1356dbb45ab51ae Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 18 Oct 2012 10:36:11 +1100 Subject: Revert "powerpc/perf: Use pmc_overflow() to detect rolled back events" This reverts commit 813312110bede27bffd082c25cd31730bd567beb. This revert was requested by the author of the patch as it seems to cause system hangs with some low frequency events --- arch/powerpc/perf/core-book3s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 0db88f501f9..aa2465e21f1 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1463,7 +1463,7 @@ static void perf_event_interrupt(struct pt_regs *regs) if (!event->hw.idx || is_limited_pmc(event->hw.idx)) continue; val = read_pmc(event->hw.idx); - if (pmc_overflow(val)) { + if ((int)val < 0) { /* event has overflowed */ found = 1; record_and_restart(event, val, regs); -- cgit v1.2.3-70-g09d2 From ce236ab576a2d76b1d6eb268221e74f05ed48d8b Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 16 Oct 2012 22:25:45 +0000 Subject: powerpc: Build fix for powerpc KVM Fix build failure for powerpc KVM by adding missing VPN_SHIFT definition and the ';' arch/powerpc/kvm/book3s_32_mmu_host.c: In function 'kvmppc_mmu_map_page': arch/powerpc/kvm/book3s_32_mmu_host.c:176: error: 'VPN_SHIFT' undeclared (first use in this function) arch/powerpc/kvm/book3s_32_mmu_host.c:176: error: (Each undeclared identifier is reported only once arch/powerpc/kvm/book3s_32_mmu_host.c:176: error: for each function it appears in.) arch/powerpc/kvm/book3s_32_mmu_host.c:178: error: expected ';' before 'next_pteg' arch/powerpc/kvm/book3s_32_mmu_host.c:190: error: label 'next_pteg' used but not defined make[1]: *** [arch/powerpc/kvm/book3s_32_mmu_host.o] Error 1 Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/kvm_book3s_32.h | 1 + arch/powerpc/kvm/book3s_32_mmu_host.c | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/include/asm/kvm_book3s_32.h b/arch/powerpc/include/asm/kvm_book3s_32.h index 38040ff8206..ce0ef6ce8f8 100644 --- a/arch/powerpc/include/asm/kvm_book3s_32.h +++ b/arch/powerpc/include/asm/kvm_book3s_32.h @@ -42,5 +42,6 @@ static inline void svcpu_put(struct kvmppc_book3s_shadow_vcpu *svcpu) #define SID_SHIFT 28 #define ESID_MASK 0xf0000000 #define VSID_MASK 0x00fffffff0000000ULL +#define VPN_SHIFT 12 #endif /* __ASM_KVM_BOOK3S_32_H__ */ diff --git a/arch/powerpc/kvm/book3s_32_mmu_host.c b/arch/powerpc/kvm/book3s_32_mmu_host.c index 00aa61268e0..b0f625a3334 100644 --- a/arch/powerpc/kvm/book3s_32_mmu_host.c +++ b/arch/powerpc/kvm/book3s_32_mmu_host.c @@ -173,8 +173,8 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte) BUG_ON(!map); vsid = map->host_vsid; - vpn = (vsid << (SID_SHIFT - VPN_SHIFT)) | ((eaddr & ~ESID_MASK) >> VPN_SHIFT) - + vpn = (vsid << (SID_SHIFT - VPN_SHIFT)) | + ((eaddr & ~ESID_MASK) >> VPN_SHIFT); next_pteg: if (rr == 16) { primary = !primary; -- cgit v1.2.3-70-g09d2 From 817deb05df45577d4037230f2facee486c11d9df Mon Sep 17 00:00:00 2001 From: Deepthi Dharwar Date: Wed, 3 Oct 2012 18:42:10 +0000 Subject: cpuidle/powerpc: Fix target residency initialisation in pseries cpuidle Remove the redundant target residency initialisation in pseries_cpuidle_driver_init(). This is currently over-writing the residency time updated as part of the static table, resulting in all the idle states having the same target residency of 100us which is incorrect. This may result in the menu governor making wrong state decisions. Signed-off-by: Deepthi Dharwar Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/processor_idle.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c index 455760b1fe6..02e425aa2af 100644 --- a/arch/powerpc/platforms/pseries/processor_idle.c +++ b/arch/powerpc/platforms/pseries/processor_idle.c @@ -246,10 +246,6 @@ static int pseries_cpuidle_driver_init(void) drv->states[drv->state_count] = /* structure copy */ cpuidle_state_table[idle_state]; - if (cpuidle_state_table == dedicated_states) - drv->states[drv->state_count].target_residency = - __get_cpu_var(smt_snooze_delay); - drv->state_count += 1; } -- cgit v1.2.3-70-g09d2 From 8ea959a17fe6e27f7954dddad5b17b0e33f0d7ee Mon Sep 17 00:00:00 2001 From: Deepthi Dharwar Date: Wed, 3 Oct 2012 18:42:18 +0000 Subject: cpuidle/powerpc: Fix smt_snooze_delay functionality. smt_snooze_delay was designed to delay idle loop's nap entry in the native idle code before it got ported over to use as part of the cpuidle framework. A -ve value assigned to smt_snooze_delay should result in busy looping, in other words disabling the entry to nap state. - https://lists.ozlabs.org/pipermail/linuxppc-dev/2010-May/082450.html This particular functionality can be achieved currently by echo 1 > /sys/devices/system/cpu/cpu*/state1/disable but it is broken when one assigns -ve value to the smt_snooze_delay variable either via sysfs entry or ppc64_cpu util. This patch aims to fix this, by disabling nap state when smt_snooze_delay variable is set to -ve value. Signed-off-by: Deepthi Dharwar Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/processor.h | 4 ++-- arch/powerpc/kernel/sysfs.c | 2 +- arch/powerpc/platforms/pseries/processor_idle.c | 24 +++++++++++++++++------- 3 files changed, 20 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 8734b385527..87502046c0d 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -388,9 +388,9 @@ extern int powersave_nap; /* set if nap mode can be used in idle loop */ extern void power7_nap(void); #ifdef CONFIG_PSERIES_IDLE -extern void update_smt_snooze_delay(int snooze); +extern void update_smt_snooze_delay(int cpu, int residency); #else -static inline void update_smt_snooze_delay(int snooze) {} +static inline void update_smt_snooze_delay(int cpu, int residency) {} #endif extern void flush_instruction_cache(void); diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 8302af64921..cf357a059dd 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -50,7 +50,7 @@ static ssize_t store_smt_snooze_delay(struct device *dev, return -EINVAL; per_cpu(smt_snooze_delay, cpu->dev.id) = snooze; - update_smt_snooze_delay(snooze); + update_smt_snooze_delay(cpu->dev.id, snooze); return count; } diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c index 02e425aa2af..a32d56d1f85 100644 --- a/arch/powerpc/platforms/pseries/processor_idle.c +++ b/arch/powerpc/platforms/pseries/processor_idle.c @@ -33,13 +33,6 @@ static int max_idle_state = MAX_IDLE_STATE_COUNT - 1; static struct cpuidle_device __percpu *pseries_cpuidle_devices; static struct cpuidle_state *cpuidle_state_table; -void update_smt_snooze_delay(int snooze) -{ - struct cpuidle_driver *drv = cpuidle_get_driver(); - if (drv) - drv->states[0].target_residency = snooze; -} - static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before) { @@ -190,6 +183,23 @@ static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = { .enter = &shared_cede_loop }, }; +void update_smt_snooze_delay(int cpu, int residency) +{ + struct cpuidle_driver *drv = cpuidle_get_driver(); + struct cpuidle_device *dev = per_cpu(cpuidle_devices, cpu); + + if (cpuidle_state_table != dedicated_states) + return; + + if (residency < 0) { + /* Disable the Nap state on that cpu */ + if (dev) + dev->states_usage[1].disable = 1; + } else + if (drv) + drv->states[0].target_residency = residency; +} + static int pseries_cpuidle_add_cpu_notifier(struct notifier_block *n, unsigned long action, void *hcpu) { -- cgit v1.2.3-70-g09d2 From 83dac59409387789b88bed40b1be86a8abc572be Mon Sep 17 00:00:00 2001 From: Deepthi Dharwar Date: Wed, 3 Oct 2012 18:42:26 +0000 Subject: cpuidle/powerpc: Fix snooze state problem in the cpuidle design on pseries. Earlier without cpuidle framework on pseries, the native arch idle routine comprised of both snooze and nap states. smt_snooze_delay variable was used to delay the idle process entry to deeper idle state like nap. With the coming of cpuidle, this arch specific idle was replaced by two different idle routines, one for supporting snooze and other for nap. This enabled addition of more low level idle states on pseries in the future. On adopting the generic cpuidle framework for POWER systems, the decision of which idle state to choose from, given a predicted idle time is taken by the menu governor based on target_residency and exit_latency of the idle states. target_residency is the minimum time to be resident in that idle state. Exit_latency is time taken to exit out of idle state. Deeper the idle state, both the target residency and exit latency would be higher. In the current design, smt_snooze_delay is used as target_residency for the snooze state which is incorrect, as it is not the minimum but the maximum duration to be in snooze state. This would result in the governor in taking bad decision, as presently target_residency of nap < target_residency of snooze inspite of nap being deeper idle state. This patch aims to fix this problem by replacing the smt_snooze_delay loop in snooze state, with the need_resched() as the governor is aware of entry and exit of various idle transitions based on which next idle time prediction. The governor is intelligent enough to determine the idle state the needs to be transitioned to and maintains a whole of heuristics including io load, previous idle states predictions etc for the same, based on which idle state entry decision is taken. With this fix, of setting target_residency of snooze to 0 nap to smt_snooze_delay if the predicted idle time is less than smt_snooze_delay (target_residency of nap) value governor would pick snooze state, else nap. This adhers to the previous native idle design. Signed-off-by: Deepthi Dharwar Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/processor_idle.c | 36 +++++++++---------------- 1 file changed, 13 insertions(+), 23 deletions(-) diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c index a32d56d1f85..45d00e5fe14 100644 --- a/arch/powerpc/platforms/pseries/processor_idle.c +++ b/arch/powerpc/platforms/pseries/processor_idle.c @@ -59,32 +59,22 @@ static int snooze_loop(struct cpuidle_device *dev, { unsigned long in_purr; ktime_t kt_before; - unsigned long start_snooze; - long snooze = drv->states[0].target_residency; + int cpu = dev->cpu; idle_loop_prolog(&in_purr, &kt_before); + local_irq_enable(); + set_thread_flag(TIF_POLLING_NRFLAG); - if (snooze) { - start_snooze = get_tb() + snooze * tb_ticks_per_usec; - local_irq_enable(); - set_thread_flag(TIF_POLLING_NRFLAG); - - while ((snooze < 0) || (get_tb() < start_snooze)) { - if (need_resched() || cpu_is_offline(dev->cpu)) - goto out; - ppc64_runlatch_off(); - HMT_low(); - HMT_very_low(); - } - - HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - smp_mb(); - local_irq_disable(); + while ((!need_resched()) && cpu_online(cpu)) { + ppc64_runlatch_off(); + HMT_low(); + HMT_very_low(); } -out: HMT_medium(); + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb(); + dev->last_residency = (int)idle_loop_epilog(in_purr, kt_before); return index; @@ -165,8 +155,8 @@ static struct cpuidle_state dedicated_states[MAX_IDLE_STATE_COUNT] = { .name = "CEDE", .desc = "CEDE", .flags = CPUIDLE_FLAG_TIME_VALID, - .exit_latency = 1, - .target_residency = 10, + .exit_latency = 10, + .target_residency = 100, .enter = &dedicated_cede_loop }, }; @@ -197,7 +187,7 @@ void update_smt_snooze_delay(int cpu, int residency) dev->states_usage[1].disable = 1; } else if (drv) - drv->states[0].target_residency = residency; + drv->states[1].target_residency = residency; } static int pseries_cpuidle_add_cpu_notifier(struct notifier_block *n, -- cgit v1.2.3-70-g09d2 From 0cc40dac8605b3b6b099b47cdde9500d592e6583 Mon Sep 17 00:00:00 2001 From: jerin jacob Date: Thu, 11 Oct 2012 22:18:51 +0530 Subject: MIPS: CMP: Fix physical core number calculation logic The CPUNum Field in EBase register is 10bit wide, so after 1 bit right shift, the mask value should be 0x1ff. Signed-off-by: jerin jacob Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4420/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/smp-cmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c index afc379ca375..06cd0c610f4 100644 --- a/arch/mips/kernel/smp-cmp.c +++ b/arch/mips/kernel/smp-cmp.c @@ -97,7 +97,7 @@ static void cmp_init_secondary(void) /* Enable per-cpu interrupts: platform specific */ - c->core = (read_c0_ebase() >> 1) & 0xff; + c->core = (read_c0_ebase() >> 1) & 0x1ff; #if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC) c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE; #endif -- cgit v1.2.3-70-g09d2 From 0978c9499944d0670338fd048a3bdb1624dc66dc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 18 Oct 2012 10:52:17 +0200 Subject: USB: iuu_phoenix: fix sysfs-attribute creation Make sure sysfs attributes are created at port probe. A recent patch ("USB: iuu_phoenix: fix port-data memory leak") removed the sysfs-attribute creation by mistake. Reported-by: Yuanhan Liu Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/iuu_phoenix.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 959f71e31dc..cd5533e81de 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -53,6 +53,8 @@ static int iuu_cardout; static bool xmas; static int vcc_default = 5; +static int iuu_create_sysfs_attrs(struct usb_serial_port *port); +static int iuu_remove_sysfs_attrs(struct usb_serial_port *port); static void read_rxcmd_callback(struct urb *urb); struct iuu_private { @@ -75,6 +77,7 @@ struct iuu_private { static int iuu_port_probe(struct usb_serial_port *port) { struct iuu_private *priv; + int ret; priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL); if (!priv) @@ -99,6 +102,14 @@ static int iuu_port_probe(struct usb_serial_port *port) usb_set_serial_port_data(port, priv); + ret = iuu_create_sysfs_attrs(port); + if (ret) { + kfree(priv->writebuf); + kfree(priv->buf); + kfree(priv); + return ret; + } + return 0; } @@ -106,6 +117,7 @@ static int iuu_port_remove(struct usb_serial_port *port) { struct iuu_private *priv = usb_get_serial_port_data(port); + iuu_remove_sysfs_attrs(port); kfree(priv->writebuf); kfree(priv->buf); kfree(priv); @@ -1197,8 +1209,6 @@ static struct usb_serial_driver iuu_device = { .num_ports = 1, .bulk_in_size = 512, .bulk_out_size = 512, - .port_probe = iuu_create_sysfs_attrs, - .port_remove = iuu_remove_sysfs_attrs, .open = iuu_open, .close = iuu_close, .write = iuu_uart_write, -- cgit v1.2.3-70-g09d2 From 5d8c61bc283826827e1f06816c146bfc507d3834 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 18 Oct 2012 11:43:28 +0200 Subject: USB: io_ti: fix sysfs-attribute creation Make sure port data is initialised before creating sysfs attributes to avoid a race. A recent patch ("USB: io_ti: fix port-data memory leak") got the sysfs-attribute creation and port-data initialisation ordering wrong. Cc: Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_ti.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 9ae65d679f0..60023c2d2a3 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2578,13 +2578,6 @@ static int edge_port_probe(struct usb_serial_port *port) return -ENOMEM; } - ret = edge_create_sysfs_attrs(port); - if (ret) { - kfifo_free(&edge_port->write_fifo); - kfree(edge_port); - return ret; - } - spin_lock_init(&edge_port->ep_lock); edge_port->port = port; edge_port->edge_serial = usb_get_serial_data(port->serial); @@ -2592,6 +2585,13 @@ static int edge_port_probe(struct usb_serial_port *port) usb_set_serial_port_data(port, edge_port); + ret = edge_create_sysfs_attrs(port); + if (ret) { + kfifo_free(&edge_port->write_fifo); + kfree(edge_port); + return ret; + } + return 0; } -- cgit v1.2.3-70-g09d2 From 470809741a28c3092279f4e1f3f432e534d46068 Mon Sep 17 00:00:00 2001 From: "Alexis R. Cortes" Date: Wed, 17 Oct 2012 14:09:12 -0500 Subject: usb: host: xhci: New system added for Compliance Mode Patch on SN65LVPE502CP This minor change adds a new system to which the "Fix Compliance Mode on SN65LVPE502CP Hardware" patch has to be applied also. System added: Vendor: Hewlett-Packard. System Model: Z1 Signed-off-by: Alexis R. Cortes Acked-by: Sarah Sharp Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8d7fcbbe6ad..7d462bf2009 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -479,7 +479,8 @@ static bool compliance_mode_recovery_timer_quirk_check(void) if (strstr(dmi_product_name, "Z420") || strstr(dmi_product_name, "Z620") || - strstr(dmi_product_name, "Z820")) + strstr(dmi_product_name, "Z820") || + strstr(dmi_product_name, "Z1")) return true; return false; -- cgit v1.2.3-70-g09d2 From 1452df6f1b7e396d89c2a1fdbdc0e0e839f97671 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Thu, 18 Oct 2012 17:19:53 +0200 Subject: USB: option: blacklist net interface on ZTE devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Based on information from the ZTE Windows drivers. Cc: Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 68 ++++++++++++++++++++++++++++++++------------- 1 file changed, 48 insertions(+), 20 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 30cff03e9f0..7e46894d784 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -503,11 +503,19 @@ static const struct option_blacklist_info net_intf5_blacklist = { .reserved = BIT(5), }; +static const struct option_blacklist_info net_intf6_blacklist = { + .reserved = BIT(6), +}; + static const struct option_blacklist_info zte_mf626_blacklist = { .sendsetup = BIT(0) | BIT(1), .reserved = BIT(4), }; +static const struct option_blacklist_info zte_1255_blacklist = { + .reserved = BIT(3) | BIT(4), +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -853,13 +861,19 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0117, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0122, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0142, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) }, @@ -872,7 +886,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) }, @@ -886,7 +901,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) }, @@ -1002,18 +1018,24 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1169, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1170, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1244, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1246, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1248, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1249, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1250, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1251, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1253, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_1255_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1257, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1258, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1259, 0xff, 0xff, 0xff) }, @@ -1071,15 +1093,21 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, -- cgit v1.2.3-70-g09d2 From 4b35f1c52943851b310afb09047bfe991ac8f5ae Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Thu, 18 Oct 2012 17:14:17 +0200 Subject: USB: option: add more ZTE devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cc: Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 7e46894d784..54d4148d01d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -895,6 +895,12 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */ + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */ + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff), @@ -903,6 +909,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) }, @@ -1080,8 +1088,16 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff), /* ZTE MF91 */ + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) }, -- cgit v1.2.3-70-g09d2 From fea2acaa5ca01eb2996226b2ae177aa66b222511 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 16 Oct 2012 11:26:57 +0100 Subject: arm64: Select MODULES_USE_ELF_RELA With commit 786d35d4 (make most arch asm/module.h files use asm-generic/module.h) arm64 needs to enable MODULES_USE_ELF_RELA for loadable modules. Signed-off-by: Catalin Marinas Acked-by: Will Deacon --- arch/arm64/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 7ff68c94607..ef54a59a9e8 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -22,6 +22,7 @@ config ARM64 select HAVE_PERF_EVENTS select HAVE_SPARSE_IRQ select IRQ_DOMAIN + select MODULES_USE_ELF_RELA select NO_BOOTMEM select OF select OF_EARLY_FLATTREE -- cgit v1.2.3-70-g09d2 From c60b0c2817bd6a990b08a7651e9cf630414665f5 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 16 Oct 2012 11:44:53 +0100 Subject: arm64: Fix the update_vsyscall() prototype With commit 576094b7 (time: Introduce new GENERIC_TIME_VSYSCALL) the old update_vsyscall() prototype is no longer available. This patch updates the arm64 port. Signed-off-by: Catalin Marinas Acked-by: Will Deacon Cc: John Stultz --- arch/arm64/kernel/vdso.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c index 17948fc7d66..ba457943a16 100644 --- a/arch/arm64/kernel/vdso.c +++ b/arch/arm64/kernel/vdso.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -222,11 +223,10 @@ struct vm_area_struct *get_gate_vma(struct mm_struct *mm) /* * Update the vDSO data page to keep in sync with kernel timekeeping. */ -void update_vsyscall(struct timespec *ts, struct timespec *wtm, - struct clocksource *clock, u32 mult) +void update_vsyscall(struct timekeeper *tk) { struct timespec xtime_coarse; - u32 use_syscall = strcmp(clock->name, "arch_sys_counter"); + u32 use_syscall = strcmp(tk->clock->name, "arch_sys_counter"); ++vdso_data->tb_seq_count; smp_wmb(); @@ -237,13 +237,13 @@ void update_vsyscall(struct timespec *ts, struct timespec *wtm, vdso_data->xtime_coarse_nsec = xtime_coarse.tv_nsec; if (!use_syscall) { - vdso_data->cs_cycle_last = clock->cycle_last; - vdso_data->xtime_clock_sec = ts->tv_sec; - vdso_data->xtime_clock_nsec = ts->tv_nsec; - vdso_data->cs_mult = mult; - vdso_data->cs_shift = clock->shift; - vdso_data->wtm_clock_sec = wtm->tv_sec; - vdso_data->wtm_clock_nsec = wtm->tv_nsec; + vdso_data->cs_cycle_last = tk->clock->cycle_last; + vdso_data->xtime_clock_sec = tk->xtime_sec; + vdso_data->xtime_clock_nsec = tk->xtime_nsec >> tk->shift; + vdso_data->cs_mult = tk->mult; + vdso_data->cs_shift = tk->shift; + vdso_data->wtm_clock_sec = tk->wall_to_monotonic.tv_sec; + vdso_data->wtm_clock_nsec = tk->wall_to_monotonic.tv_nsec; } smp_wmb(); -- cgit v1.2.3-70-g09d2 From f71a1a42667f576ec736bb1200eba2118fee3a22 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 16 Oct 2012 12:00:29 +0100 Subject: arm64: Ignore memory blocks below PHYS_OFFSET According to Documentation/arm64/booting.txt, the kernel image must be loaded at a pre-defined offset from the start of RAM so that the kernel can calculate PHYS_OFFSET based on this address. If the DT contains memory blocks below this PHYS_OFFSET, report them and ignore the corresponding memory range. Signed-off-by: Catalin Marinas --- arch/arm64/kernel/setup.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 48ffb9fb3fe..7665a9bfdb1 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -170,7 +170,19 @@ static void __init setup_machine_fdt(phys_addr_t dt_phys) void __init early_init_dt_add_memory_arch(u64 base, u64 size) { + base &= PAGE_MASK; size &= PAGE_MASK; + if (base + size < PHYS_OFFSET) { + pr_warning("Ignoring memory block 0x%llx - 0x%llx\n", + base, base + size); + return; + } + if (base < PHYS_OFFSET) { + pr_warning("Ignoring memory range 0x%llx - 0x%llx\n", + base, PHYS_OFFSET); + size -= PHYS_OFFSET - base; + base = PHYS_OFFSET; + } memblock_add(base, size); } -- cgit v1.2.3-70-g09d2 From 16dd46bb781a1d37eeb2377e8e48276e9d14d15d Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 16 Oct 2012 17:07:46 +0100 Subject: arm64: No need to set the x0-x2 registers in start_thread() For historical reasons, ARM used to set r0-r2 in start_thread() to the first values on the user stack when starting a new user application. The same logic has been inherited in AArch64. The x0 register is overridden by the sys_execve() return value so it's always zero on success. The x1 and x2 registers are ignored by AArch64 and EABI AArch32 applications, so we can safely remove the register setting for both native and compat user space. This also fixes a potential fault with the kernel accessing user space stack directly. Signed-off-by: Catalin Marinas Reported-by: Al Viro --- arch/arm64/include/asm/processor.h | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index 39a208a392f..5d810044fed 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -92,30 +92,20 @@ static inline void start_thread_common(struct pt_regs *regs, unsigned long pc) static inline void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp) { - unsigned long *stack = (unsigned long *)sp; - start_thread_common(regs, pc); regs->pstate = PSR_MODE_EL0t; regs->sp = sp; - regs->regs[2] = stack[2]; /* x2 (envp) */ - regs->regs[1] = stack[1]; /* x1 (argv) */ - regs->regs[0] = stack[0]; /* x0 (argc) */ } #ifdef CONFIG_COMPAT static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp) { - unsigned int *stack = (unsigned int *)sp; - start_thread_common(regs, pc); regs->pstate = COMPAT_PSR_MODE_USR; if (pc & 1) regs->pstate |= COMPAT_PSR_T_BIT; regs->compat_sp = sp; - regs->regs[2] = stack[2]; /* x2 (envp) */ - regs->regs[1] = stack[1]; /* x1 (argv) */ - regs->regs[0] = stack[0]; /* x0 (argc) */ } #endif -- cgit v1.2.3-70-g09d2 From 7797d17c591ae62c6f43c6de4fdb8beeb50eb692 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 11 Oct 2012 12:10:57 +0100 Subject: arm64: ptrace: make structure padding explicit for debug registers The user_hwdebug_state structure contains implicit padding to conform to the alignment requirements of the AArch64 ABI (namely that aggregates must be aligned to their most aligned member). This patch fixes the ptrace functions operating on struct user_hwdebug_state so that the padding is handled correctly. Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/uapi/asm/ptrace.h | 3 ++- arch/arm64/kernel/ptrace.c | 36 ++++++++++++++++++++++++++++++------ 2 files changed, 32 insertions(+), 7 deletions(-) diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h index 9b131b4efa0..6913643bbe5 100644 --- a/arch/arm64/include/uapi/asm/ptrace.h +++ b/arch/arm64/include/uapi/asm/ptrace.h @@ -79,13 +79,14 @@ struct user_fpsimd_state { struct user_hwdebug_state { __u32 dbg_info; + __u32 pad; struct { __u64 addr; __u32 ctrl; + __u32 pad; } dbg_regs[16]; }; - #endif /* __ASSEMBLY__ */ #endif /* _UAPI__ASM_PTRACE_H */ diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index 2ea3968367c..c62d39d5c99 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -372,7 +372,7 @@ static int ptrace_hbp_set_addr(unsigned int note_type, #define PTRACE_HBP_ADDR_SZ sizeof(u64) #define PTRACE_HBP_CTRL_SZ sizeof(u32) -#define PTRACE_HBP_REG_OFF sizeof(u32) +#define PTRACE_HBP_PAD_SZ sizeof(u32) static int hw_break_get(struct task_struct *target, const struct user_regset *regset, @@ -380,7 +380,7 @@ static int hw_break_get(struct task_struct *target, void *kbuf, void __user *ubuf) { unsigned int note_type = regset->core_note_type; - int ret, idx = 0, offset = PTRACE_HBP_REG_OFF, limit; + int ret, idx = 0, offset, limit; u32 info, ctrl; u64 addr; @@ -389,11 +389,20 @@ static int hw_break_get(struct task_struct *target, if (ret) return ret; - ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &info, 0, 4); + ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &info, 0, + sizeof(info)); + if (ret) + return ret; + + /* Pad */ + offset = offsetof(struct user_hwdebug_state, pad); + ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, offset, + offset + PTRACE_HBP_PAD_SZ); if (ret) return ret; /* (address, ctrl) registers */ + offset = offsetof(struct user_hwdebug_state, dbg_regs); limit = regset->n * regset->size; while (count && offset < limit) { ret = ptrace_hbp_get_addr(note_type, target, idx, &addr); @@ -413,6 +422,13 @@ static int hw_break_get(struct task_struct *target, if (ret) return ret; offset += PTRACE_HBP_CTRL_SZ; + + ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, + offset, + offset + PTRACE_HBP_PAD_SZ); + if (ret) + return ret; + offset += PTRACE_HBP_PAD_SZ; idx++; } @@ -425,12 +441,13 @@ static int hw_break_set(struct task_struct *target, const void *kbuf, const void __user *ubuf) { unsigned int note_type = regset->core_note_type; - int ret, idx = 0, offset = PTRACE_HBP_REG_OFF, limit; + int ret, idx = 0, offset, limit; u32 ctrl; u64 addr; - /* Resource info */ - ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, 0, 4); + /* Resource info and pad */ + offset = offsetof(struct user_hwdebug_state, dbg_regs); + ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, 0, offset); if (ret) return ret; @@ -454,6 +471,13 @@ static int hw_break_set(struct task_struct *target, if (ret) return ret; offset += PTRACE_HBP_CTRL_SZ; + + ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, + offset, + offset + PTRACE_HBP_PAD_SZ); + if (ret) + return ret; + offset += PTRACE_HBP_PAD_SZ; idx++; } -- cgit v1.2.3-70-g09d2 From 8f34a1da35aed7b438a2de8ac27723a5472e8399 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 18 Oct 2012 15:17:00 +0100 Subject: arm64: ptrace: use HW_BREAKPOINT_EMPTY type for disabled breakpoints If a debugger tries to zero a hardware debug control register, the kernel will try to infer both the type and length of the breakpoint in order to sanity-check against the requested regset type. This will fail because the encoding will appear as a zero-length breakpoint. This patch changes the control register setting so that disabled breakpoints are treated as HW_BREAKPOINT_EMPTY and no further sanity-checking is required. Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/kernel/ptrace.c | 37 +++++++++++++++++++++---------------- 1 file changed, 21 insertions(+), 16 deletions(-) diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c index c62d39d5c99..6e1e77f1831 100644 --- a/arch/arm64/kernel/ptrace.c +++ b/arch/arm64/kernel/ptrace.c @@ -234,28 +234,33 @@ static int ptrace_hbp_fill_attr_ctrl(unsigned int note_type, struct arch_hw_breakpoint_ctrl ctrl, struct perf_event_attr *attr) { - int err, len, type; + int err, len, type, disabled = !ctrl.enabled; - err = arch_bp_generic_fields(ctrl, &len, &type); - if (err) - return err; - - switch (note_type) { - case NT_ARM_HW_BREAK: - if ((type & HW_BREAKPOINT_X) != type) - return -EINVAL; - break; - case NT_ARM_HW_WATCH: - if ((type & HW_BREAKPOINT_RW) != type) + if (disabled) { + len = 0; + type = HW_BREAKPOINT_EMPTY; + } else { + err = arch_bp_generic_fields(ctrl, &len, &type); + if (err) + return err; + + switch (note_type) { + case NT_ARM_HW_BREAK: + if ((type & HW_BREAKPOINT_X) != type) + return -EINVAL; + break; + case NT_ARM_HW_WATCH: + if ((type & HW_BREAKPOINT_RW) != type) + return -EINVAL; + break; + default: return -EINVAL; - break; - default: - return -EINVAL; + } } attr->bp_len = len; attr->bp_type = type; - attr->disabled = !ctrl.enabled; + attr->disabled = disabled; return 0; } -- cgit v1.2.3-70-g09d2 From 43385846968b082bb6c174e8b17479e5123b8d73 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 17 Oct 2012 20:41:15 -0700 Subject: fs, xattr: fix bug when removing a name not in xattr list Commit 38f38657444d ("xattr: extract simple_xattr code from tmpfs") moved some code from tmpfs but introduced a subtle bug along the way. If the name passed to simple_xattr_remove() does not exist in the list of xattrs, then it is possible to call kfree(new_xattr) when new_xattr is actually initialized to itself on the stack via uninitialized_var(). This causes a BUG() since the memory was not allocated via the slab allocator and was not bypassed through to the page allocator because it was too large. Initialize the local variable to NULL so the kfree() never takes place. Reported-by: Fengguang Wu Signed-off-by: David Rientjes Acked-by: Hugh Dickins Acked-by: Aristeu Rozanski Signed-off-by: Linus Torvalds --- fs/xattr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xattr.c b/fs/xattr.c index e164dddb8e9..e21c119f4f9 100644 --- a/fs/xattr.c +++ b/fs/xattr.c @@ -846,7 +846,7 @@ static int __simple_xattr_set(struct simple_xattrs *xattrs, const char *name, const void *value, size_t size, int flags) { struct simple_xattr *xattr; - struct simple_xattr *uninitialized_var(new_xattr); + struct simple_xattr *new_xattr = NULL; int err = 0; /* value == NULL means remove */ -- cgit v1.2.3-70-g09d2 From 32bec973a8435afc0b032da22174701f836549b2 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Thu, 18 Oct 2012 23:24:57 +0300 Subject: crypto: aesni - fix XTS mode on x86-32, add wrapper function for asmlinkage aesni_enc() Calling convention for internal functions and 'asmlinkage' functions is different on x86-32. Therefore do not directly cast aesni_enc as XTS tweak function, but use wrapper function in between. Fixes crash with "XTS + aesni_intel + x86-32" combination. Cc: stable@vger.kernel.org Reported-by: Krzysztof Kolasa Signed-off-by: Jussi Kivilinna Acked-by: David S. Miller Signed-off-by: Linus Torvalds --- arch/x86/crypto/aesni-intel_glue.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c index 7c04d0da709..1b9c22bea8a 100644 --- a/arch/x86/crypto/aesni-intel_glue.c +++ b/arch/x86/crypto/aesni-intel_glue.c @@ -515,6 +515,11 @@ static int xts_aesni_setkey(struct crypto_tfm *tfm, const u8 *key, } +static void aesni_xts_tweak(void *ctx, u8 *out, const u8 *in) +{ + aesni_enc(ctx, out, in); +} + static int xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes) { @@ -525,7 +530,7 @@ static int xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, .tbuflen = sizeof(buf), .tweak_ctx = aes_ctx(ctx->raw_tweak_ctx), - .tweak_fn = XTS_TWEAK_CAST(aesni_enc), + .tweak_fn = aesni_xts_tweak, .crypt_ctx = aes_ctx(ctx->raw_crypt_ctx), .crypt_fn = lrw_xts_encrypt_callback, }; @@ -550,7 +555,7 @@ static int xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, .tbuflen = sizeof(buf), .tweak_ctx = aes_ctx(ctx->raw_tweak_ctx), - .tweak_fn = XTS_TWEAK_CAST(aesni_enc), + .tweak_fn = aesni_xts_tweak, .crypt_ctx = aes_ctx(ctx->raw_crypt_ctx), .crypt_fn = lrw_xts_decrypt_callback, }; -- cgit v1.2.3-70-g09d2 From 3ed8d11585fdfcd27fc507401db442eae70db79e Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 9 Oct 2012 09:46:55 +0100 Subject: UAPI: (Scripted) Disintegrate arch/hexagon/include/asm Signed-off-by: David Howells Acked-by: Arnd Bergmann Acked-by: Thomas Gleixner Acked-by: Michael Kerrisk Acked-by: Paul E. McKenney Acked-by: Dave Jones Signed-off-by: Richard Kuo --- arch/hexagon/include/asm/Kbuild | 3 - arch/hexagon/include/asm/bitsperlong.h | 26 --- arch/hexagon/include/asm/byteorder.h | 28 ---- arch/hexagon/include/asm/kvm_para.h | 1 - arch/hexagon/include/asm/param.h | 26 --- arch/hexagon/include/asm/ptrace.h | 35 ----- arch/hexagon/include/asm/registers.h | 236 ---------------------------- arch/hexagon/include/asm/setup.h | 29 ---- arch/hexagon/include/asm/sigcontext.h | 33 ---- arch/hexagon/include/asm/signal.h | 26 --- arch/hexagon/include/asm/swab.h | 24 --- arch/hexagon/include/asm/unistd.h | 31 ---- arch/hexagon/include/asm/user.h | 81 ---------- arch/hexagon/include/uapi/asm/Kbuild | 12 ++ arch/hexagon/include/uapi/asm/bitsperlong.h | 26 +++ arch/hexagon/include/uapi/asm/byteorder.h | 28 ++++ arch/hexagon/include/uapi/asm/kvm_para.h | 1 + arch/hexagon/include/uapi/asm/param.h | 26 +++ arch/hexagon/include/uapi/asm/ptrace.h | 35 +++++ arch/hexagon/include/uapi/asm/registers.h | 236 ++++++++++++++++++++++++++++ arch/hexagon/include/uapi/asm/setup.h | 29 ++++ arch/hexagon/include/uapi/asm/sigcontext.h | 33 ++++ arch/hexagon/include/uapi/asm/signal.h | 26 +++ arch/hexagon/include/uapi/asm/swab.h | 24 +++ arch/hexagon/include/uapi/asm/unistd.h | 31 ++++ arch/hexagon/include/uapi/asm/user.h | 81 ++++++++++ 26 files changed, 588 insertions(+), 579 deletions(-) delete mode 100644 arch/hexagon/include/asm/bitsperlong.h delete mode 100644 arch/hexagon/include/asm/byteorder.h delete mode 100644 arch/hexagon/include/asm/kvm_para.h delete mode 100644 arch/hexagon/include/asm/param.h delete mode 100644 arch/hexagon/include/asm/ptrace.h delete mode 100644 arch/hexagon/include/asm/registers.h delete mode 100644 arch/hexagon/include/asm/setup.h delete mode 100644 arch/hexagon/include/asm/sigcontext.h delete mode 100644 arch/hexagon/include/asm/signal.h delete mode 100644 arch/hexagon/include/asm/swab.h delete mode 100644 arch/hexagon/include/asm/unistd.h delete mode 100644 arch/hexagon/include/asm/user.h create mode 100644 arch/hexagon/include/uapi/asm/bitsperlong.h create mode 100644 arch/hexagon/include/uapi/asm/byteorder.h create mode 100644 arch/hexagon/include/uapi/asm/kvm_para.h create mode 100644 arch/hexagon/include/uapi/asm/param.h create mode 100644 arch/hexagon/include/uapi/asm/ptrace.h create mode 100644 arch/hexagon/include/uapi/asm/registers.h create mode 100644 arch/hexagon/include/uapi/asm/setup.h create mode 100644 arch/hexagon/include/uapi/asm/sigcontext.h create mode 100644 arch/hexagon/include/uapi/asm/signal.h create mode 100644 arch/hexagon/include/uapi/asm/swab.h create mode 100644 arch/hexagon/include/uapi/asm/unistd.h create mode 100644 arch/hexagon/include/uapi/asm/user.h diff --git a/arch/hexagon/include/asm/Kbuild b/arch/hexagon/include/asm/Kbuild index 3364b6966d2..3bfa9b30f44 100644 --- a/arch/hexagon/include/asm/Kbuild +++ b/arch/hexagon/include/asm/Kbuild @@ -1,8 +1,5 @@ -include include/asm-generic/Kbuild.asm -header-y += registers.h header-y += ucontext.h -header-y += user.h generic-y += auxvec.h generic-y += bug.h diff --git a/arch/hexagon/include/asm/bitsperlong.h b/arch/hexagon/include/asm/bitsperlong.h deleted file mode 100644 index 2701cae3426..00000000000 --- a/arch/hexagon/include/asm/bitsperlong.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef __ASM_HEXAGON_BITSPERLONG_H -#define __ASM_HEXAGON_BITSPERLONG_H - -#define __BITS_PER_LONG 32 - -#include - -#endif diff --git a/arch/hexagon/include/asm/byteorder.h b/arch/hexagon/include/asm/byteorder.h deleted file mode 100644 index 0e19b9fe4ca..00000000000 --- a/arch/hexagon/include/asm/byteorder.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef _ASM_BYTEORDER_H -#define _ASM_BYTEORDER_H - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -#endif - -#include - -#endif /* _ASM_BYTEORDER_H */ diff --git a/arch/hexagon/include/asm/kvm_para.h b/arch/hexagon/include/asm/kvm_para.h deleted file mode 100644 index 14fab8f0b95..00000000000 --- a/arch/hexagon/include/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/hexagon/include/asm/param.h b/arch/hexagon/include/asm/param.h deleted file mode 100644 index 285344bbd03..00000000000 --- a/arch/hexagon/include/asm/param.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef _ASM_PARAM_H -#define _ASM_PARAM_H - -#define EXEC_PAGESIZE 16384 - -#include - -#endif diff --git a/arch/hexagon/include/asm/ptrace.h b/arch/hexagon/include/asm/ptrace.h deleted file mode 100644 index 3d2f607cd63..00000000000 --- a/arch/hexagon/include/asm/ptrace.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Ptrace definitions for the Hexagon architecture - * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef _ASM_PTRACE_H -#define _ASM_PTRACE_H - -#include - -#define instruction_pointer(regs) pt_elr(regs) -#define user_stack_pointer(regs) ((regs)->r29) - -#define profile_pc(regs) instruction_pointer(regs) - -/* kprobe-based event tracer support */ -extern int regs_query_register_offset(const char *name); -extern const char *regs_query_register_name(unsigned int offset); - -#endif diff --git a/arch/hexagon/include/asm/registers.h b/arch/hexagon/include/asm/registers.h deleted file mode 100644 index 4dd741be855..00000000000 --- a/arch/hexagon/include/asm/registers.h +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Register definitions for the Hexagon architecture - * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef _ASM_REGISTERS_H -#define _ASM_REGISTERS_H - -#define SP r29 - -#ifndef __ASSEMBLY__ - -/* See kernel/entry.S for further documentation. */ - -/* - * Entry code copies the event record out of guest registers into - * this structure (which is on the stack). - */ - -struct hvm_event_record { - unsigned long vmel; /* Event Linkage (return address) */ - unsigned long vmest; /* Event context - pre-event SSR values */ - unsigned long vmpsp; /* Previous stack pointer */ - unsigned long vmbadva; /* Bad virtual address for addressing events */ -}; - -struct pt_regs { - long restart_r0; /* R0 checkpoint for syscall restart */ - long syscall_nr; /* Only used in system calls */ - union { - struct { - unsigned long usr; - unsigned long preds; - }; - long long int predsusr; - }; - union { - struct { - unsigned long m0; - unsigned long m1; - }; - long long int m1m0; - }; - union { - struct { - unsigned long sa1; - unsigned long lc1; - }; - long long int lc1sa1; - }; - union { - struct { - unsigned long sa0; - unsigned long lc0; - }; - long long int lc0sa0; - }; - union { - struct { - unsigned long gp; - unsigned long ugp; - }; - long long int ugpgp; - }; - /* - * Be extremely careful with rearranging these, if at all. Some code - * assumes the 32 registers exist exactly like this in memory; - * e.g. kernel/ptrace.c - * e.g. kernel/signal.c (restore_sigcontext) - */ - union { - struct { - unsigned long r00; - unsigned long r01; - }; - long long int r0100; - }; - union { - struct { - unsigned long r02; - unsigned long r03; - }; - long long int r0302; - }; - union { - struct { - unsigned long r04; - unsigned long r05; - }; - long long int r0504; - }; - union { - struct { - unsigned long r06; - unsigned long r07; - }; - long long int r0706; - }; - union { - struct { - unsigned long r08; - unsigned long r09; - }; - long long int r0908; - }; - union { - struct { - unsigned long r10; - unsigned long r11; - }; - long long int r1110; - }; - union { - struct { - unsigned long r12; - unsigned long r13; - }; - long long int r1312; - }; - union { - struct { - unsigned long r14; - unsigned long r15; - }; - long long int r1514; - }; - union { - struct { - unsigned long r16; - unsigned long r17; - }; - long long int r1716; - }; - union { - struct { - unsigned long r18; - unsigned long r19; - }; - long long int r1918; - }; - union { - struct { - unsigned long r20; - unsigned long r21; - }; - long long int r2120; - }; - union { - struct { - unsigned long r22; - unsigned long r23; - }; - long long int r2322; - }; - union { - struct { - unsigned long r24; - unsigned long r25; - }; - long long int r2524; - }; - union { - struct { - unsigned long r26; - unsigned long r27; - }; - long long int r2726; - }; - union { - struct { - unsigned long r28; - unsigned long r29; - }; - long long int r2928; - }; - union { - struct { - unsigned long r30; - unsigned long r31; - }; - long long int r3130; - }; - /* VM dispatch pushes event record onto stack - we can build on it */ - struct hvm_event_record hvmer; -}; - -/* Defines to conveniently access the values */ - -/* - * As of the VM spec 0.5, these registers are now set/retrieved via a - * VM call. On the in-bound side, we just fetch the values - * at the entry points and stuff them into the old record in pt_regs. - * However, on the outbound side, probably at VM rte, we set the - * registers back. - */ - -#define pt_elr(regs) ((regs)->hvmer.vmel) -#define pt_set_elr(regs, val) ((regs)->hvmer.vmel = (val)) -#define pt_cause(regs) ((regs)->hvmer.vmest & (HVM_VMEST_CAUSE_MSK)) -#define user_mode(regs) \ - (((regs)->hvmer.vmest & (HVM_VMEST_UM_MSK << HVM_VMEST_UM_SFT)) != 0) -#define ints_enabled(regs) \ - (((regs)->hvmer.vmest & (HVM_VMEST_IE_MSK << HVM_VMEST_IE_SFT)) != 0) -#define pt_psp(regs) ((regs)->hvmer.vmpsp) -#define pt_badva(regs) ((regs)->hvmer.vmbadva) - -#define pt_set_rte_sp(regs, sp) do {\ - pt_psp(regs) = (sp);\ - (regs)->SP = (unsigned long) &((regs)->hvmer);\ - } while (0) - -#define pt_set_kmode(regs) \ - (regs)->hvmer.vmest = (HVM_VMEST_IE_MSK << HVM_VMEST_IE_SFT) - -#define pt_set_usermode(regs) \ - (regs)->hvmer.vmest = (HVM_VMEST_UM_MSK << HVM_VMEST_UM_SFT) \ - | (HVM_VMEST_IE_MSK << HVM_VMEST_IE_SFT) - -#endif /* ifndef __ASSEMBLY */ - -#endif diff --git a/arch/hexagon/include/asm/setup.h b/arch/hexagon/include/asm/setup.h deleted file mode 100644 index 3b754c50bc0..00000000000 --- a/arch/hexagon/include/asm/setup.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef _ASM_SETUP_H -#define _ASM_SETUP_H - -#include -#include - -extern char external_cmdline_buffer; - -void __init setup_arch_memory(void); - -#endif diff --git a/arch/hexagon/include/asm/sigcontext.h b/arch/hexagon/include/asm/sigcontext.h deleted file mode 100644 index ce6dcd99522..00000000000 --- a/arch/hexagon/include/asm/sigcontext.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef _ASM_SIGCONTEXT_H -#define _ASM_SIGCONTEXT_H - -#include - -/* - * Signal context structure - contains all info to do with the state - * before the signal handler was invoked. Note: only add new entries - * to the end of the structure. - */ -struct sigcontext { - struct user_regs_struct sc_regs; -} __aligned(8); - -#endif diff --git a/arch/hexagon/include/asm/signal.h b/arch/hexagon/include/asm/signal.h deleted file mode 100644 index 471c0562e17..00000000000 --- a/arch/hexagon/include/asm/signal.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef _ASM_SIGNAL_H -#define _ASM_SIGNAL_H - -extern unsigned long __rt_sigtramp_template[2]; - -#include - -#endif diff --git a/arch/hexagon/include/asm/swab.h b/arch/hexagon/include/asm/swab.h deleted file mode 100644 index 99cf0be3fb8..00000000000 --- a/arch/hexagon/include/asm/swab.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef _ASM_SWAB_H -#define _ASM_SWAB_H - -#define __SWAB_64_THRU_32__ - -#endif diff --git a/arch/hexagon/include/asm/unistd.h b/arch/hexagon/include/asm/unistd.h deleted file mode 100644 index c0d5565030a..00000000000 --- a/arch/hexagon/include/asm/unistd.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Syscall support for Hexagon - * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -/* - * The kernel pulls this unistd.h in three different ways: - * 1. the "normal" way which gets all the __NR defines - * 2. with __SYSCALL defined to produce function declarations - * 3. with __SYSCALL defined to produce syscall table initialization - * See also: syscalltab.c - */ - -#define sys_mmap2 sys_mmap_pgoff - -#include diff --git a/arch/hexagon/include/asm/user.h b/arch/hexagon/include/asm/user.h deleted file mode 100644 index 3a55078543d..00000000000 --- a/arch/hexagon/include/asm/user.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#ifndef HEXAGON_ASM_USER_H -#define HEXAGON_ASM_USER_H - -/* - * Layout for registers passed in elf core dumps to userspace. - * - * Basically a rearranged subset of "pt_regs". - * - * Interested parties: libc, gdb... - */ - -struct user_regs_struct { - unsigned long r0; - unsigned long r1; - unsigned long r2; - unsigned long r3; - unsigned long r4; - unsigned long r5; - unsigned long r6; - unsigned long r7; - unsigned long r8; - unsigned long r9; - unsigned long r10; - unsigned long r11; - unsigned long r12; - unsigned long r13; - unsigned long r14; - unsigned long r15; - unsigned long r16; - unsigned long r17; - unsigned long r18; - unsigned long r19; - unsigned long r20; - unsigned long r21; - unsigned long r22; - unsigned long r23; - unsigned long r24; - unsigned long r25; - unsigned long r26; - unsigned long r27; - unsigned long r28; - unsigned long r29; - unsigned long r30; - unsigned long r31; - unsigned long sa0; - unsigned long lc0; - unsigned long sa1; - unsigned long lc1; - unsigned long m0; - unsigned long m1; - unsigned long usr; - unsigned long p3_0; - unsigned long gp; - unsigned long ugp; - unsigned long pc; - unsigned long cause; - unsigned long badva; - unsigned long pad1; /* pad out to 48 words total */ - unsigned long pad2; /* pad out to 48 words total */ - unsigned long pad3; /* pad out to 48 words total */ -}; - -#endif diff --git a/arch/hexagon/include/uapi/asm/Kbuild b/arch/hexagon/include/uapi/asm/Kbuild index baebb3da1d4..c31706c3863 100644 --- a/arch/hexagon/include/uapi/asm/Kbuild +++ b/arch/hexagon/include/uapi/asm/Kbuild @@ -1,3 +1,15 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +header-y += bitsperlong.h +header-y += byteorder.h +header-y += kvm_para.h +header-y += param.h +header-y += ptrace.h +header-y += registers.h +header-y += setup.h +header-y += sigcontext.h +header-y += signal.h +header-y += swab.h +header-y += unistd.h +header-y += user.h diff --git a/arch/hexagon/include/uapi/asm/bitsperlong.h b/arch/hexagon/include/uapi/asm/bitsperlong.h new file mode 100644 index 00000000000..2701cae3426 --- /dev/null +++ b/arch/hexagon/include/uapi/asm/bitsperlong.h @@ -0,0 +1,26 @@ +/* + * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef __ASM_HEXAGON_BITSPERLONG_H +#define __ASM_HEXAGON_BITSPERLONG_H + +#define __BITS_PER_LONG 32 + +#include + +#endif diff --git a/arch/hexagon/include/uapi/asm/byteorder.h b/arch/hexagon/include/uapi/asm/byteorder.h new file mode 100644 index 00000000000..0e19b9fe4ca --- /dev/null +++ b/arch/hexagon/include/uapi/asm/byteorder.h @@ -0,0 +1,28 @@ +/* + * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _ASM_BYTEORDER_H +#define _ASM_BYTEORDER_H + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +#endif + +#include + +#endif /* _ASM_BYTEORDER_H */ diff --git a/arch/hexagon/include/uapi/asm/kvm_para.h b/arch/hexagon/include/uapi/asm/kvm_para.h new file mode 100644 index 00000000000..14fab8f0b95 --- /dev/null +++ b/arch/hexagon/include/uapi/asm/kvm_para.h @@ -0,0 +1 @@ +#include diff --git a/arch/hexagon/include/uapi/asm/param.h b/arch/hexagon/include/uapi/asm/param.h new file mode 100644 index 00000000000..285344bbd03 --- /dev/null +++ b/arch/hexagon/include/uapi/asm/param.h @@ -0,0 +1,26 @@ +/* + * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _ASM_PARAM_H +#define _ASM_PARAM_H + +#define EXEC_PAGESIZE 16384 + +#include + +#endif diff --git a/arch/hexagon/include/uapi/asm/ptrace.h b/arch/hexagon/include/uapi/asm/ptrace.h new file mode 100644 index 00000000000..3d2f607cd63 --- /dev/null +++ b/arch/hexagon/include/uapi/asm/ptrace.h @@ -0,0 +1,35 @@ +/* + * Ptrace definitions for the Hexagon architecture + * + * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _ASM_PTRACE_H +#define _ASM_PTRACE_H + +#include + +#define instruction_pointer(regs) pt_elr(regs) +#define user_stack_pointer(regs) ((regs)->r29) + +#define profile_pc(regs) instruction_pointer(regs) + +/* kprobe-based event tracer support */ +extern int regs_query_register_offset(const char *name); +extern const char *regs_query_register_name(unsigned int offset); + +#endif diff --git a/arch/hexagon/include/uapi/asm/registers.h b/arch/hexagon/include/uapi/asm/registers.h new file mode 100644 index 00000000000..4dd741be855 --- /dev/null +++ b/arch/hexagon/include/uapi/asm/registers.h @@ -0,0 +1,236 @@ +/* + * Register definitions for the Hexagon architecture + * + * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _ASM_REGISTERS_H +#define _ASM_REGISTERS_H + +#define SP r29 + +#ifndef __ASSEMBLY__ + +/* See kernel/entry.S for further documentation. */ + +/* + * Entry code copies the event record out of guest registers into + * this structure (which is on the stack). + */ + +struct hvm_event_record { + unsigned long vmel; /* Event Linkage (return address) */ + unsigned long vmest; /* Event context - pre-event SSR values */ + unsigned long vmpsp; /* Previous stack pointer */ + unsigned long vmbadva; /* Bad virtual address for addressing events */ +}; + +struct pt_regs { + long restart_r0; /* R0 checkpoint for syscall restart */ + long syscall_nr; /* Only used in system calls */ + union { + struct { + unsigned long usr; + unsigned long preds; + }; + long long int predsusr; + }; + union { + struct { + unsigned long m0; + unsigned long m1; + }; + long long int m1m0; + }; + union { + struct { + unsigned long sa1; + unsigned long lc1; + }; + long long int lc1sa1; + }; + union { + struct { + unsigned long sa0; + unsigned long lc0; + }; + long long int lc0sa0; + }; + union { + struct { + unsigned long gp; + unsigned long ugp; + }; + long long int ugpgp; + }; + /* + * Be extremely careful with rearranging these, if at all. Some code + * assumes the 32 registers exist exactly like this in memory; + * e.g. kernel/ptrace.c + * e.g. kernel/signal.c (restore_sigcontext) + */ + union { + struct { + unsigned long r00; + unsigned long r01; + }; + long long int r0100; + }; + union { + struct { + unsigned long r02; + unsigned long r03; + }; + long long int r0302; + }; + union { + struct { + unsigned long r04; + unsigned long r05; + }; + long long int r0504; + }; + union { + struct { + unsigned long r06; + unsigned long r07; + }; + long long int r0706; + }; + union { + struct { + unsigned long r08; + unsigned long r09; + }; + long long int r0908; + }; + union { + struct { + unsigned long r10; + unsigned long r11; + }; + long long int r1110; + }; + union { + struct { + unsigned long r12; + unsigned long r13; + }; + long long int r1312; + }; + union { + struct { + unsigned long r14; + unsigned long r15; + }; + long long int r1514; + }; + union { + struct { + unsigned long r16; + unsigned long r17; + }; + long long int r1716; + }; + union { + struct { + unsigned long r18; + unsigned long r19; + }; + long long int r1918; + }; + union { + struct { + unsigned long r20; + unsigned long r21; + }; + long long int r2120; + }; + union { + struct { + unsigned long r22; + unsigned long r23; + }; + long long int r2322; + }; + union { + struct { + unsigned long r24; + unsigned long r25; + }; + long long int r2524; + }; + union { + struct { + unsigned long r26; + unsigned long r27; + }; + long long int r2726; + }; + union { + struct { + unsigned long r28; + unsigned long r29; + }; + long long int r2928; + }; + union { + struct { + unsigned long r30; + unsigned long r31; + }; + long long int r3130; + }; + /* VM dispatch pushes event record onto stack - we can build on it */ + struct hvm_event_record hvmer; +}; + +/* Defines to conveniently access the values */ + +/* + * As of the VM spec 0.5, these registers are now set/retrieved via a + * VM call. On the in-bound side, we just fetch the values + * at the entry points and stuff them into the old record in pt_regs. + * However, on the outbound side, probably at VM rte, we set the + * registers back. + */ + +#define pt_elr(regs) ((regs)->hvmer.vmel) +#define pt_set_elr(regs, val) ((regs)->hvmer.vmel = (val)) +#define pt_cause(regs) ((regs)->hvmer.vmest & (HVM_VMEST_CAUSE_MSK)) +#define user_mode(regs) \ + (((regs)->hvmer.vmest & (HVM_VMEST_UM_MSK << HVM_VMEST_UM_SFT)) != 0) +#define ints_enabled(regs) \ + (((regs)->hvmer.vmest & (HVM_VMEST_IE_MSK << HVM_VMEST_IE_SFT)) != 0) +#define pt_psp(regs) ((regs)->hvmer.vmpsp) +#define pt_badva(regs) ((regs)->hvmer.vmbadva) + +#define pt_set_rte_sp(regs, sp) do {\ + pt_psp(regs) = (sp);\ + (regs)->SP = (unsigned long) &((regs)->hvmer);\ + } while (0) + +#define pt_set_kmode(regs) \ + (regs)->hvmer.vmest = (HVM_VMEST_IE_MSK << HVM_VMEST_IE_SFT) + +#define pt_set_usermode(regs) \ + (regs)->hvmer.vmest = (HVM_VMEST_UM_MSK << HVM_VMEST_UM_SFT) \ + | (HVM_VMEST_IE_MSK << HVM_VMEST_IE_SFT) + +#endif /* ifndef __ASSEMBLY */ + +#endif diff --git a/arch/hexagon/include/uapi/asm/setup.h b/arch/hexagon/include/uapi/asm/setup.h new file mode 100644 index 00000000000..3b754c50bc0 --- /dev/null +++ b/arch/hexagon/include/uapi/asm/setup.h @@ -0,0 +1,29 @@ +/* + * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _ASM_SETUP_H +#define _ASM_SETUP_H + +#include +#include + +extern char external_cmdline_buffer; + +void __init setup_arch_memory(void); + +#endif diff --git a/arch/hexagon/include/uapi/asm/sigcontext.h b/arch/hexagon/include/uapi/asm/sigcontext.h new file mode 100644 index 00000000000..ce6dcd99522 --- /dev/null +++ b/arch/hexagon/include/uapi/asm/sigcontext.h @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _ASM_SIGCONTEXT_H +#define _ASM_SIGCONTEXT_H + +#include + +/* + * Signal context structure - contains all info to do with the state + * before the signal handler was invoked. Note: only add new entries + * to the end of the structure. + */ +struct sigcontext { + struct user_regs_struct sc_regs; +} __aligned(8); + +#endif diff --git a/arch/hexagon/include/uapi/asm/signal.h b/arch/hexagon/include/uapi/asm/signal.h new file mode 100644 index 00000000000..471c0562e17 --- /dev/null +++ b/arch/hexagon/include/uapi/asm/signal.h @@ -0,0 +1,26 @@ +/* + * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _ASM_SIGNAL_H +#define _ASM_SIGNAL_H + +extern unsigned long __rt_sigtramp_template[2]; + +#include + +#endif diff --git a/arch/hexagon/include/uapi/asm/swab.h b/arch/hexagon/include/uapi/asm/swab.h new file mode 100644 index 00000000000..99cf0be3fb8 --- /dev/null +++ b/arch/hexagon/include/uapi/asm/swab.h @@ -0,0 +1,24 @@ +/* + * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _ASM_SWAB_H +#define _ASM_SWAB_H + +#define __SWAB_64_THRU_32__ + +#endif diff --git a/arch/hexagon/include/uapi/asm/unistd.h b/arch/hexagon/include/uapi/asm/unistd.h new file mode 100644 index 00000000000..c0d5565030a --- /dev/null +++ b/arch/hexagon/include/uapi/asm/unistd.h @@ -0,0 +1,31 @@ +/* + * Syscall support for Hexagon + * + * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +/* + * The kernel pulls this unistd.h in three different ways: + * 1. the "normal" way which gets all the __NR defines + * 2. with __SYSCALL defined to produce function declarations + * 3. with __SYSCALL defined to produce syscall table initialization + * See also: syscalltab.c + */ + +#define sys_mmap2 sys_mmap_pgoff + +#include diff --git a/arch/hexagon/include/uapi/asm/user.h b/arch/hexagon/include/uapi/asm/user.h new file mode 100644 index 00000000000..3a55078543d --- /dev/null +++ b/arch/hexagon/include/uapi/asm/user.h @@ -0,0 +1,81 @@ +/* + * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef HEXAGON_ASM_USER_H +#define HEXAGON_ASM_USER_H + +/* + * Layout for registers passed in elf core dumps to userspace. + * + * Basically a rearranged subset of "pt_regs". + * + * Interested parties: libc, gdb... + */ + +struct user_regs_struct { + unsigned long r0; + unsigned long r1; + unsigned long r2; + unsigned long r3; + unsigned long r4; + unsigned long r5; + unsigned long r6; + unsigned long r7; + unsigned long r8; + unsigned long r9; + unsigned long r10; + unsigned long r11; + unsigned long r12; + unsigned long r13; + unsigned long r14; + unsigned long r15; + unsigned long r16; + unsigned long r17; + unsigned long r18; + unsigned long r19; + unsigned long r20; + unsigned long r21; + unsigned long r22; + unsigned long r23; + unsigned long r24; + unsigned long r25; + unsigned long r26; + unsigned long r27; + unsigned long r28; + unsigned long r29; + unsigned long r30; + unsigned long r31; + unsigned long sa0; + unsigned long lc0; + unsigned long sa1; + unsigned long lc1; + unsigned long m0; + unsigned long m1; + unsigned long usr; + unsigned long p3_0; + unsigned long gp; + unsigned long ugp; + unsigned long pc; + unsigned long cause; + unsigned long badva; + unsigned long pad1; /* pad out to 48 words total */ + unsigned long pad2; /* pad out to 48 words total */ + unsigned long pad3; /* pad out to 48 words total */ +}; + +#endif -- cgit v1.2.3-70-g09d2 From e1858b2a21cd84a855945a4747fb2db41b250c22 Mon Sep 17 00:00:00 2001 From: Richard Kuo Date: Wed, 19 Sep 2012 16:22:02 -0500 Subject: Hexagon: Copyright marking changes Code Aurora Forum (CAF) is becoming a part of Linux Foundation Labs. Signed-off-by: Richard Kuo --- arch/hexagon/include/asm/atomic.h | 2 +- arch/hexagon/include/asm/barrier.h | 2 +- arch/hexagon/include/asm/bitops.h | 2 +- arch/hexagon/include/asm/cache.h | 2 +- arch/hexagon/include/asm/cacheflush.h | 2 +- arch/hexagon/include/asm/checksum.h | 2 +- arch/hexagon/include/asm/cmpxchg.h | 2 +- arch/hexagon/include/asm/delay.h | 2 +- arch/hexagon/include/asm/dma-mapping.h | 2 +- arch/hexagon/include/asm/dma.h | 2 +- arch/hexagon/include/asm/elf.h | 2 +- arch/hexagon/include/asm/exec.h | 2 +- arch/hexagon/include/asm/fixmap.h | 2 +- arch/hexagon/include/asm/hexagon_vm.h | 2 +- arch/hexagon/include/asm/intrinsics.h | 2 +- arch/hexagon/include/asm/io.h | 2 +- arch/hexagon/include/asm/irq.h | 2 +- arch/hexagon/include/asm/irqflags.h | 2 +- arch/hexagon/include/asm/kgdb.h | 2 +- arch/hexagon/include/asm/linkage.h | 2 +- arch/hexagon/include/asm/mem-layout.h | 2 +- arch/hexagon/include/asm/mmu.h | 2 +- arch/hexagon/include/asm/mmu_context.h | 2 +- arch/hexagon/include/asm/module.h | 2 +- arch/hexagon/include/asm/page.h | 2 +- arch/hexagon/include/asm/perf_event.h | 2 +- arch/hexagon/include/asm/pgalloc.h | 2 +- arch/hexagon/include/asm/pgtable.h | 2 +- arch/hexagon/include/asm/processor.h | 2 +- arch/hexagon/include/asm/smp.h | 2 +- arch/hexagon/include/asm/spinlock.h | 2 +- arch/hexagon/include/asm/spinlock_types.h | 2 +- arch/hexagon/include/asm/string.h | 2 +- arch/hexagon/include/asm/suspend.h | 2 +- arch/hexagon/include/asm/switch_to.h | 2 +- arch/hexagon/include/asm/syscall.h | 2 +- arch/hexagon/include/asm/thread_info.h | 2 +- arch/hexagon/include/asm/time.h | 2 +- arch/hexagon/include/asm/timer-regs.h | 2 +- arch/hexagon/include/asm/timex.h | 2 +- arch/hexagon/include/asm/tlb.h | 2 +- arch/hexagon/include/asm/tlbflush.h | 2 +- arch/hexagon/include/asm/traps.h | 2 +- arch/hexagon/include/asm/uaccess.h | 2 +- arch/hexagon/include/asm/vdso.h | 2 +- arch/hexagon/include/asm/vm_fault.h | 2 +- arch/hexagon/include/asm/vm_mmu.h | 2 +- arch/hexagon/include/uapi/asm/bitsperlong.h | 2 +- arch/hexagon/include/uapi/asm/byteorder.h | 2 +- arch/hexagon/include/uapi/asm/param.h | 2 +- arch/hexagon/include/uapi/asm/ptrace.h | 2 +- arch/hexagon/include/uapi/asm/registers.h | 17 +---------------- arch/hexagon/include/uapi/asm/setup.h | 2 +- arch/hexagon/include/uapi/asm/sigcontext.h | 2 +- arch/hexagon/include/uapi/asm/signal.h | 2 +- arch/hexagon/include/uapi/asm/swab.h | 2 +- arch/hexagon/include/uapi/asm/unistd.h | 2 +- arch/hexagon/include/uapi/asm/user.h | 18 ------------------ arch/hexagon/kernel/asm-offsets.c | 2 +- arch/hexagon/kernel/dma.c | 2 +- arch/hexagon/kernel/head.S | 2 +- arch/hexagon/kernel/hexagon_ksyms.c | 2 +- arch/hexagon/kernel/irq_cpu.c | 2 +- arch/hexagon/kernel/kgdb.c | 2 +- arch/hexagon/kernel/module.c | 2 +- arch/hexagon/kernel/process.c | 2 +- arch/hexagon/kernel/ptrace.c | 2 +- arch/hexagon/kernel/reset.c | 2 +- arch/hexagon/kernel/setup.c | 2 +- arch/hexagon/kernel/signal.c | 2 +- arch/hexagon/kernel/smp.c | 2 +- arch/hexagon/kernel/stacktrace.c | 2 +- arch/hexagon/kernel/syscall.c | 2 +- arch/hexagon/kernel/syscalltab.c | 2 +- arch/hexagon/kernel/time.c | 2 +- arch/hexagon/kernel/topology.c | 2 +- arch/hexagon/kernel/trampoline.S | 2 +- arch/hexagon/kernel/traps.c | 2 +- arch/hexagon/kernel/vdso.c | 2 +- arch/hexagon/kernel/vm_entry.S | 2 +- arch/hexagon/kernel/vm_events.c | 2 +- arch/hexagon/kernel/vm_init_segtable.S | 2 +- arch/hexagon/kernel/vm_ops.S | 2 +- arch/hexagon/kernel/vm_switch.S | 2 +- arch/hexagon/kernel/vm_vectors.S | 2 +- arch/hexagon/kernel/vmlinux.lds.S | 2 +- arch/hexagon/lib/checksum.c | 2 +- arch/hexagon/lib/io.c | 2 +- arch/hexagon/lib/memcpy.S | 2 +- arch/hexagon/lib/memset.S | 2 +- arch/hexagon/mm/cache.c | 2 +- arch/hexagon/mm/copy_from_user.S | 2 +- arch/hexagon/mm/copy_to_user.S | 2 +- arch/hexagon/mm/copy_user_template.S | 2 +- arch/hexagon/mm/init.c | 2 +- arch/hexagon/mm/ioremap.c | 2 +- arch/hexagon/mm/pgalloc.c | 2 +- arch/hexagon/mm/strnlen_user.S | 2 +- arch/hexagon/mm/uaccess.c | 2 +- arch/hexagon/mm/vm_fault.c | 2 +- arch/hexagon/mm/vm_tlb.c | 2 +- 101 files changed, 100 insertions(+), 133 deletions(-) diff --git a/arch/hexagon/include/asm/atomic.h b/arch/hexagon/include/asm/atomic.h index 3e258043337..468fbb0781c 100644 --- a/arch/hexagon/include/asm/atomic.h +++ b/arch/hexagon/include/asm/atomic.h @@ -1,7 +1,7 @@ /* * Atomic operations for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * * This program is free software; you can redistribute it and/or modify diff --git a/arch/hexagon/include/asm/barrier.h b/arch/hexagon/include/asm/barrier.h index a4ed6e26cb1..1041a8e70ce 100644 --- a/arch/hexagon/include/asm/barrier.h +++ b/arch/hexagon/include/asm/barrier.h @@ -1,7 +1,7 @@ /* * Memory barrier definitions for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/bitops.h b/arch/hexagon/include/asm/bitops.h index 4caa649ad78..9b1e4afbab3 100644 --- a/arch/hexagon/include/asm/bitops.h +++ b/arch/hexagon/include/asm/bitops.h @@ -1,7 +1,7 @@ /* * Bit operations for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * * This program is free software; you can redistribute it and/or modify diff --git a/arch/hexagon/include/asm/cache.h b/arch/hexagon/include/asm/cache.h index 0f01de2eb4a..f4ca594fdf8 100644 --- a/arch/hexagon/include/asm/cache.h +++ b/arch/hexagon/include/asm/cache.h @@ -1,7 +1,7 @@ /* * Cache definitions for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/cacheflush.h b/arch/hexagon/include/asm/cacheflush.h index 6865c1be927..49e0896ec24 100644 --- a/arch/hexagon/include/asm/cacheflush.h +++ b/arch/hexagon/include/asm/cacheflush.h @@ -1,7 +1,7 @@ /* * Cache flush operations for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/checksum.h b/arch/hexagon/include/asm/checksum.h index 3ce4ecd44f8..46ec8a7fd65 100644 --- a/arch/hexagon/include/asm/checksum.h +++ b/arch/hexagon/include/asm/checksum.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/cmpxchg.h b/arch/hexagon/include/asm/cmpxchg.h index c5f9527e1df..9e7802911a5 100644 --- a/arch/hexagon/include/asm/cmpxchg.h +++ b/arch/hexagon/include/asm/cmpxchg.h @@ -1,7 +1,7 @@ /* * xchg/cmpxchg operations for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * * This program is free software; you can redistribute it and/or modify diff --git a/arch/hexagon/include/asm/delay.h b/arch/hexagon/include/asm/delay.h index 9ab12e9a872..53079719d66 100644 --- a/arch/hexagon/include/asm/delay.h +++ b/arch/hexagon/include/asm/delay.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/dma-mapping.h b/arch/hexagon/include/asm/dma-mapping.h index 233ed3d2d25..85e9935660c 100644 --- a/arch/hexagon/include/asm/dma-mapping.h +++ b/arch/hexagon/include/asm/dma-mapping.h @@ -1,7 +1,7 @@ /* * DMA operations for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/dma.h b/arch/hexagon/include/asm/dma.h index da6d2f61a93..9e34ff49f3b 100644 --- a/arch/hexagon/include/asm/dma.h +++ b/arch/hexagon/include/asm/dma.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/elf.h b/arch/hexagon/include/asm/elf.h index 82b499621e0..1ba4b3bff5e 100644 --- a/arch/hexagon/include/asm/elf.h +++ b/arch/hexagon/include/asm/elf.h @@ -1,7 +1,7 @@ /* * ELF definitions for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/exec.h b/arch/hexagon/include/asm/exec.h index 350e6d497d4..c32b2132614 100644 --- a/arch/hexagon/include/asm/exec.h +++ b/arch/hexagon/include/asm/exec.h @@ -1,7 +1,7 @@ /* * Process execution related definitions for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/fixmap.h b/arch/hexagon/include/asm/fixmap.h index b27f4941645..b75b6bf4269 100644 --- a/arch/hexagon/include/asm/fixmap.h +++ b/arch/hexagon/include/asm/fixmap.h @@ -1,7 +1,7 @@ /* * Fixmap support for Hexagon - enough to support highmem features * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/hexagon_vm.h b/arch/hexagon/include/asm/hexagon_vm.h index 182cb9d5476..c144bee6cab 100644 --- a/arch/hexagon/include/asm/hexagon_vm.h +++ b/arch/hexagon/include/asm/hexagon_vm.h @@ -1,7 +1,7 @@ /* * Declarations for to Hexagon Virtal Machine. * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/intrinsics.h b/arch/hexagon/include/asm/intrinsics.h index 1c02186d2e9..ca587737fb2 100644 --- a/arch/hexagon/include/asm/intrinsics.h +++ b/arch/hexagon/include/asm/intrinsics.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/io.h b/arch/hexagon/include/asm/io.h index b3acc2cc71b..e527cfeff5b 100644 --- a/arch/hexagon/include/asm/io.h +++ b/arch/hexagon/include/asm/io.h @@ -1,7 +1,7 @@ /* * IO definitions for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/irq.h b/arch/hexagon/include/asm/irq.h index ded8c15cf3e..51661db389d 100644 --- a/arch/hexagon/include/asm/irq.h +++ b/arch/hexagon/include/asm/irq.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/irqflags.h b/arch/hexagon/include/asm/irqflags.h index ec152365541..e5fd9492d60 100644 --- a/arch/hexagon/include/asm/irqflags.h +++ b/arch/hexagon/include/asm/irqflags.h @@ -1,7 +1,7 @@ /* * IRQ support for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/kgdb.h b/arch/hexagon/include/asm/kgdb.h index 9e8779702f1..32a6fb66944 100644 --- a/arch/hexagon/include/asm/kgdb.h +++ b/arch/hexagon/include/asm/kgdb.h @@ -1,7 +1,7 @@ /* * arch/hexagon/include/asm/kgdb.h - Hexagon KGDB Support * - * Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/linkage.h b/arch/hexagon/include/asm/linkage.h index a00b85f680b..31b4cbe7e58 100644 --- a/arch/hexagon/include/asm/linkage.h +++ b/arch/hexagon/include/asm/linkage.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/mem-layout.h b/arch/hexagon/include/asm/mem-layout.h index 72e5dcda79f..af16e977c55 100644 --- a/arch/hexagon/include/asm/mem-layout.h +++ b/arch/hexagon/include/asm/mem-layout.h @@ -1,7 +1,7 @@ /* * Memory layout definitions for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/mmu.h b/arch/hexagon/include/asm/mmu.h index 30a5d8d2659..2288b19fd0f 100644 --- a/arch/hexagon/include/asm/mmu.h +++ b/arch/hexagon/include/asm/mmu.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/mmu_context.h b/arch/hexagon/include/asm/mmu_context.h index b4fe5a5411b..d423d2e73c3 100644 --- a/arch/hexagon/include/asm/mmu_context.h +++ b/arch/hexagon/include/asm/mmu_context.h @@ -1,7 +1,7 @@ /* * MM context support for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/module.h b/arch/hexagon/include/asm/module.h index 72ba494e6d7..6b4323acef4 100644 --- a/arch/hexagon/include/asm/module.h +++ b/arch/hexagon/include/asm/module.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/page.h b/arch/hexagon/include/asm/page.h index edd97626c48..692adc21342 100644 --- a/arch/hexagon/include/asm/page.h +++ b/arch/hexagon/include/asm/page.h @@ -1,7 +1,7 @@ /* * Page management definitions for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/perf_event.h b/arch/hexagon/include/asm/perf_event.h index 8b8526b491c..430978b1de3 100644 --- a/arch/hexagon/include/asm/perf_event.h +++ b/arch/hexagon/include/asm/perf_event.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/pgalloc.h b/arch/hexagon/include/asm/pgalloc.h index 13443c77513..679bf6d6648 100644 --- a/arch/hexagon/include/asm/pgalloc.h +++ b/arch/hexagon/include/asm/pgalloc.h @@ -1,7 +1,7 @@ /* * Page table support for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/pgtable.h b/arch/hexagon/include/asm/pgtable.h index ca619bf225e..20d55f69fe5 100644 --- a/arch/hexagon/include/asm/pgtable.h +++ b/arch/hexagon/include/asm/pgtable.h @@ -1,7 +1,7 @@ /* * Page table support for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/processor.h b/arch/hexagon/include/asm/processor.h index e8ea459002a..a03323ab9d4 100644 --- a/arch/hexagon/include/asm/processor.h +++ b/arch/hexagon/include/asm/processor.h @@ -1,7 +1,7 @@ /* * Process/processor support for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/smp.h b/arch/hexagon/include/asm/smp.h index 87c869a6a89..2b9b974e095 100644 --- a/arch/hexagon/include/asm/smp.h +++ b/arch/hexagon/include/asm/smp.h @@ -1,7 +1,7 @@ /* * SMP definitions for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/spinlock.h b/arch/hexagon/include/asm/spinlock.h index 168a920485a..12ca4ebc033 100644 --- a/arch/hexagon/include/asm/spinlock.h +++ b/arch/hexagon/include/asm/spinlock.h @@ -1,7 +1,7 @@ /* * Spinlock support for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * * This program is free software; you can redistribute it and/or modify diff --git a/arch/hexagon/include/asm/spinlock_types.h b/arch/hexagon/include/asm/spinlock_types.h index 99b5a7575c2..7a906b5214a 100644 --- a/arch/hexagon/include/asm/spinlock_types.h +++ b/arch/hexagon/include/asm/spinlock_types.h @@ -1,7 +1,7 @@ /* * Spinlock support for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/string.h b/arch/hexagon/include/asm/string.h index f4489c15942..7d37f47a1d0 100644 --- a/arch/hexagon/include/asm/string.h +++ b/arch/hexagon/include/asm/string.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/suspend.h b/arch/hexagon/include/asm/suspend.h index 089dd826879..18b44b557fb 100644 --- a/arch/hexagon/include/asm/suspend.h +++ b/arch/hexagon/include/asm/suspend.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/switch_to.h b/arch/hexagon/include/asm/switch_to.h index 28ca0dfb606..96745e7b3e3 100644 --- a/arch/hexagon/include/asm/switch_to.h +++ b/arch/hexagon/include/asm/switch_to.h @@ -1,7 +1,7 @@ /* * Task switching definitions for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/syscall.h b/arch/hexagon/include/asm/syscall.h index 3e7d61d38d9..fb0e9d48faa 100644 --- a/arch/hexagon/include/asm/syscall.h +++ b/arch/hexagon/include/asm/syscall.h @@ -1,7 +1,7 @@ /* * Syscall support for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/thread_info.h b/arch/hexagon/include/asm/thread_info.h index e4a0aad69cb..f7c32406a71 100644 --- a/arch/hexagon/include/asm/thread_info.h +++ b/arch/hexagon/include/asm/thread_info.h @@ -1,7 +1,7 @@ /* * Thread support for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/time.h b/arch/hexagon/include/asm/time.h index 081b82cac9a..deda170c03b 100644 --- a/arch/hexagon/include/asm/time.h +++ b/arch/hexagon/include/asm/time.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/timer-regs.h b/arch/hexagon/include/asm/timer-regs.h index d80db239a7b..79912b8c1e5 100644 --- a/arch/hexagon/include/asm/timer-regs.h +++ b/arch/hexagon/include/asm/timer-regs.h @@ -1,7 +1,7 @@ /* * Timer support for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/timex.h b/arch/hexagon/include/asm/timex.h index b11c62b23f3..f63fe132f07 100644 --- a/arch/hexagon/include/asm/timex.h +++ b/arch/hexagon/include/asm/timex.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/tlb.h b/arch/hexagon/include/asm/tlb.h index 473abde01d6..2f00772cc08 100644 --- a/arch/hexagon/include/asm/tlb.h +++ b/arch/hexagon/include/asm/tlb.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/tlbflush.h b/arch/hexagon/include/asm/tlbflush.h index b89a9025122..62d95a9705c 100644 --- a/arch/hexagon/include/asm/tlbflush.h +++ b/arch/hexagon/include/asm/tlbflush.h @@ -1,7 +1,7 @@ /* * TLB flush support for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/traps.h b/arch/hexagon/include/asm/traps.h index 6a407f6e5e2..ec11285012c 100644 --- a/arch/hexagon/include/asm/traps.h +++ b/arch/hexagon/include/asm/traps.h @@ -1,7 +1,7 @@ /* * Trap support for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/uaccess.h b/arch/hexagon/include/asm/uaccess.h index 7e706eadbf0..e4127e4d6a5 100644 --- a/arch/hexagon/include/asm/uaccess.h +++ b/arch/hexagon/include/asm/uaccess.h @@ -1,7 +1,7 @@ /* * User memory access support for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/vdso.h b/arch/hexagon/include/asm/vdso.h index 2d95cbba357..ed08e6c6886 100644 --- a/arch/hexagon/include/asm/vdso.h +++ b/arch/hexagon/include/asm/vdso.h @@ -1,7 +1,7 @@ /* * vDSO implementation for Hexagon * - * Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/vm_fault.h b/arch/hexagon/include/asm/vm_fault.h index cacda36ef5d..9b0e9c50ced 100644 --- a/arch/hexagon/include/asm/vm_fault.h +++ b/arch/hexagon/include/asm/vm_fault.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/asm/vm_mmu.h b/arch/hexagon/include/asm/vm_mmu.h index 580462de5cc..9a94de7969b 100644 --- a/arch/hexagon/include/asm/vm_mmu.h +++ b/arch/hexagon/include/asm/vm_mmu.h @@ -1,7 +1,7 @@ /* * Hexagon VM page table entry definitions * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/uapi/asm/bitsperlong.h b/arch/hexagon/include/uapi/asm/bitsperlong.h index 2701cae3426..4a658151383 100644 --- a/arch/hexagon/include/uapi/asm/bitsperlong.h +++ b/arch/hexagon/include/uapi/asm/bitsperlong.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/uapi/asm/byteorder.h b/arch/hexagon/include/uapi/asm/byteorder.h index 0e19b9fe4ca..e31f3f7d9a4 100644 --- a/arch/hexagon/include/uapi/asm/byteorder.h +++ b/arch/hexagon/include/uapi/asm/byteorder.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/uapi/asm/param.h b/arch/hexagon/include/uapi/asm/param.h index 285344bbd03..5cec8c0417f 100644 --- a/arch/hexagon/include/uapi/asm/param.h +++ b/arch/hexagon/include/uapi/asm/param.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/uapi/asm/ptrace.h b/arch/hexagon/include/uapi/asm/ptrace.h index 3d2f607cd63..8ef784047a7 100644 --- a/arch/hexagon/include/uapi/asm/ptrace.h +++ b/arch/hexagon/include/uapi/asm/ptrace.h @@ -1,7 +1,7 @@ /* * Ptrace definitions for the Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/uapi/asm/registers.h b/arch/hexagon/include/uapi/asm/registers.h index 4dd741be855..c20406f63b5 100644 --- a/arch/hexagon/include/uapi/asm/registers.h +++ b/arch/hexagon/include/uapi/asm/registers.h @@ -1,23 +1,8 @@ /* * Register definitions for the Hexagon architecture - * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. */ + #ifndef _ASM_REGISTERS_H #define _ASM_REGISTERS_H diff --git a/arch/hexagon/include/uapi/asm/setup.h b/arch/hexagon/include/uapi/asm/setup.h index 3b754c50bc0..e48285e4af9 100644 --- a/arch/hexagon/include/uapi/asm/setup.h +++ b/arch/hexagon/include/uapi/asm/setup.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/uapi/asm/sigcontext.h b/arch/hexagon/include/uapi/asm/sigcontext.h index ce6dcd99522..b6ba5369ccc 100644 --- a/arch/hexagon/include/uapi/asm/sigcontext.h +++ b/arch/hexagon/include/uapi/asm/sigcontext.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/uapi/asm/signal.h b/arch/hexagon/include/uapi/asm/signal.h index 471c0562e17..939556817d3 100644 --- a/arch/hexagon/include/uapi/asm/signal.h +++ b/arch/hexagon/include/uapi/asm/signal.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/uapi/asm/swab.h b/arch/hexagon/include/uapi/asm/swab.h index 99cf0be3fb8..9069e9247a2 100644 --- a/arch/hexagon/include/uapi/asm/swab.h +++ b/arch/hexagon/include/uapi/asm/swab.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/uapi/asm/unistd.h b/arch/hexagon/include/uapi/asm/unistd.h index c0d5565030a..81312d6a52e 100644 --- a/arch/hexagon/include/uapi/asm/unistd.h +++ b/arch/hexagon/include/uapi/asm/unistd.h @@ -1,7 +1,7 @@ /* * Syscall support for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/include/uapi/asm/user.h b/arch/hexagon/include/uapi/asm/user.h index 3a55078543d..cef13ee1413 100644 --- a/arch/hexagon/include/uapi/asm/user.h +++ b/arch/hexagon/include/uapi/asm/user.h @@ -1,21 +1,3 @@ -/* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - #ifndef HEXAGON_ASM_USER_H #define HEXAGON_ASM_USER_H diff --git a/arch/hexagon/kernel/asm-offsets.c b/arch/hexagon/kernel/asm-offsets.c index 89ffa514611..2d5e84d3b00 100644 --- a/arch/hexagon/kernel/asm-offsets.c +++ b/arch/hexagon/kernel/asm-offsets.c @@ -5,7 +5,7 @@ * Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com * Copyright (C) 2000 MIPS Technologies, Inc. * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/dma.c b/arch/hexagon/kernel/dma.c index 2b48751aa5f..65c7bdcf565 100644 --- a/arch/hexagon/kernel/dma.c +++ b/arch/hexagon/kernel/dma.c @@ -1,7 +1,7 @@ /* * DMA implementation for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/head.S b/arch/hexagon/kernel/head.S index 8e6b819125a..d859402c73b 100644 --- a/arch/hexagon/kernel/head.S +++ b/arch/hexagon/kernel/head.S @@ -1,7 +1,7 @@ /* * Early kernel startup code for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * * This program is free software; you can redistribute it and/or modify diff --git a/arch/hexagon/kernel/hexagon_ksyms.c b/arch/hexagon/kernel/hexagon_ksyms.c index 7f189247180..32b1379d687 100644 --- a/arch/hexagon/kernel/hexagon_ksyms.c +++ b/arch/hexagon/kernel/hexagon_ksyms.c @@ -1,7 +1,7 @@ /* * Export of symbols defined in assembly files and/or libgcc. * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/irq_cpu.c b/arch/hexagon/kernel/irq_cpu.c index d4416a1a431..85883e1fdc1 100644 --- a/arch/hexagon/kernel/irq_cpu.c +++ b/arch/hexagon/kernel/irq_cpu.c @@ -1,7 +1,7 @@ /* * First-level interrupt controller model for Hexagon. * - * Copyright (c) 2010-2011 Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/kgdb.c b/arch/hexagon/kernel/kgdb.c index fe4aa1bcca5..34464537064 100644 --- a/arch/hexagon/kernel/kgdb.c +++ b/arch/hexagon/kernel/kgdb.c @@ -1,7 +1,7 @@ /* * arch/hexagon/kernel/kgdb.c - Hexagon KGDB Support * - * Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/module.c b/arch/hexagon/kernel/module.c index 61a76bae366..477d07a5646 100644 --- a/arch/hexagon/kernel/module.c +++ b/arch/hexagon/kernel/module.c @@ -1,7 +1,7 @@ /* * Kernel module loader for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/process.c b/arch/hexagon/kernel/process.c index af51de63b83..9f6d7411b57 100644 --- a/arch/hexagon/kernel/process.c +++ b/arch/hexagon/kernel/process.c @@ -1,7 +1,7 @@ /* * Process creation support for Hexagon * - * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/ptrace.c b/arch/hexagon/kernel/ptrace.c index 96c3b2c4dba..670b1b0bee6 100644 --- a/arch/hexagon/kernel/ptrace.c +++ b/arch/hexagon/kernel/ptrace.c @@ -1,7 +1,7 @@ /* * Ptrace support for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/reset.c b/arch/hexagon/kernel/reset.c index 4d72fc58e9b..6aeabc962b3 100644 --- a/arch/hexagon/kernel/reset.c +++ b/arch/hexagon/kernel/reset.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/setup.c b/arch/hexagon/kernel/setup.c index 1202f78d25c..94a38783500 100644 --- a/arch/hexagon/kernel/setup.c +++ b/arch/hexagon/kernel/setup.c @@ -1,7 +1,7 @@ /* * Arch related setup for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/signal.c b/arch/hexagon/kernel/signal.c index 1ea16bec7b9..5047b8b879c 100644 --- a/arch/hexagon/kernel/signal.c +++ b/arch/hexagon/kernel/signal.c @@ -1,7 +1,7 @@ /* * Signal support for Hexagon processor * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/smp.c b/arch/hexagon/kernel/smp.c index 149fbefc1a4..8e095dffd07 100644 --- a/arch/hexagon/kernel/smp.c +++ b/arch/hexagon/kernel/smp.c @@ -1,7 +1,7 @@ /* * SMP support for Hexagon * - * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/stacktrace.c b/arch/hexagon/kernel/stacktrace.c index 11c597b2ac5..f94918b449a 100644 --- a/arch/hexagon/kernel/stacktrace.c +++ b/arch/hexagon/kernel/stacktrace.c @@ -1,7 +1,7 @@ /* * Stacktrace support for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/syscall.c b/arch/hexagon/kernel/syscall.c index 25a9bfe3445..319fa6494f5 100644 --- a/arch/hexagon/kernel/syscall.c +++ b/arch/hexagon/kernel/syscall.c @@ -1,7 +1,7 @@ /* * Hexagon system calls * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/syscalltab.c b/arch/hexagon/kernel/syscalltab.c index c550f4177ab..7024b1ddc08 100644 --- a/arch/hexagon/kernel/syscalltab.c +++ b/arch/hexagon/kernel/syscalltab.c @@ -1,7 +1,7 @@ /* * System call table for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/time.c b/arch/hexagon/kernel/time.c index 36ba6418571..9903fad997f 100644 --- a/arch/hexagon/kernel/time.c +++ b/arch/hexagon/kernel/time.c @@ -1,7 +1,7 @@ /* * Time related functions for Hexagon architecture * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/topology.c b/arch/hexagon/kernel/topology.c index ba447518443..352f27e809f 100644 --- a/arch/hexagon/kernel/topology.c +++ b/arch/hexagon/kernel/topology.c @@ -1,7 +1,7 @@ /* * CPU topology for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/trampoline.S b/arch/hexagon/kernel/trampoline.S index 06c36c036b9..18110a9056b 100644 --- a/arch/hexagon/kernel/trampoline.S +++ b/arch/hexagon/kernel/trampoline.S @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/traps.c b/arch/hexagon/kernel/traps.c index f08857d0715..a41eeb8eeaa 100644 --- a/arch/hexagon/kernel/traps.c +++ b/arch/hexagon/kernel/traps.c @@ -1,7 +1,7 @@ /* * Kernel traps/events for Hexagon processor * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/vdso.c b/arch/hexagon/kernel/vdso.c index 5d39f42f708..0bf5a87e4d0 100644 --- a/arch/hexagon/kernel/vdso.c +++ b/arch/hexagon/kernel/vdso.c @@ -1,7 +1,7 @@ /* * vDSO implementation for Hexagon * - * Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/vm_entry.S b/arch/hexagon/kernel/vm_entry.S index 5b99066cbc8..cd71673ac25 100644 --- a/arch/hexagon/kernel/vm_entry.S +++ b/arch/hexagon/kernel/vm_entry.S @@ -1,7 +1,7 @@ /* * Event entry/exit for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/vm_events.c b/arch/hexagon/kernel/vm_events.c index 591fc1b6863..9b5a4a295a6 100644 --- a/arch/hexagon/kernel/vm_events.c +++ b/arch/hexagon/kernel/vm_events.c @@ -1,7 +1,7 @@ /* * Mostly IRQ support for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/vm_init_segtable.S b/arch/hexagon/kernel/vm_init_segtable.S index aebb35b6465..80967f2192b 100644 --- a/arch/hexagon/kernel/vm_init_segtable.S +++ b/arch/hexagon/kernel/vm_init_segtable.S @@ -1,7 +1,7 @@ /* * Initial page table for Linux kernel under Hexagon VM, * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/vm_ops.S b/arch/hexagon/kernel/vm_ops.S index 24d7fcac4ff..9fb77b3f6cf 100644 --- a/arch/hexagon/kernel/vm_ops.S +++ b/arch/hexagon/kernel/vm_ops.S @@ -1,7 +1,7 @@ /* * Hexagon VM instruction support * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/vm_switch.S b/arch/hexagon/kernel/vm_switch.S index 0decf2f58e3..62c6df91b3b 100644 --- a/arch/hexagon/kernel/vm_switch.S +++ b/arch/hexagon/kernel/vm_switch.S @@ -1,7 +1,7 @@ /* * Context switch support for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/vm_vectors.S b/arch/hexagon/kernel/vm_vectors.S index 97a4b50b00d..620f42cc582 100644 --- a/arch/hexagon/kernel/vm_vectors.S +++ b/arch/hexagon/kernel/vm_vectors.S @@ -1,7 +1,7 @@ /* * Event jump tables * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/kernel/vmlinux.lds.S b/arch/hexagon/kernel/vmlinux.lds.S index 071d3c30edf..14e793f6abb 100644 --- a/arch/hexagon/kernel/vmlinux.lds.S +++ b/arch/hexagon/kernel/vmlinux.lds.S @@ -1,7 +1,7 @@ /* * Linker script for Hexagon kernel * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/lib/checksum.c b/arch/hexagon/lib/checksum.c index 93005522d52..8169f78a46a 100644 --- a/arch/hexagon/lib/checksum.c +++ b/arch/hexagon/lib/checksum.c @@ -1,7 +1,7 @@ /* * Checksum functions for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/lib/io.c b/arch/hexagon/lib/io.c index 8ae47ba0e70..885c9626d5e 100644 --- a/arch/hexagon/lib/io.c +++ b/arch/hexagon/lib/io.c @@ -1,7 +1,7 @@ /* * I/O access functions for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/lib/memcpy.S b/arch/hexagon/lib/memcpy.S index 2101c339566..81c561c4b4d 100644 --- a/arch/hexagon/lib/memcpy.S +++ b/arch/hexagon/lib/memcpy.S @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * * This program is free software; you can redistribute it and/or modify diff --git a/arch/hexagon/lib/memset.S b/arch/hexagon/lib/memset.S index 26d961439ab..9341889ea3f 100644 --- a/arch/hexagon/lib/memset.S +++ b/arch/hexagon/lib/memset.S @@ -1,5 +1,5 @@ /* - * Copyright (c) 2011 Code Aurora Forum. All rights reserved. + * Copyright (c) 2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/mm/cache.c b/arch/hexagon/mm/cache.c index c5cf6ee2758..fe14ccf2856 100644 --- a/arch/hexagon/mm/cache.c +++ b/arch/hexagon/mm/cache.c @@ -1,7 +1,7 @@ /* * Cache management functions for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/mm/copy_from_user.S b/arch/hexagon/mm/copy_from_user.S index 8eb1d4d61a3..7fc94f3e664 100644 --- a/arch/hexagon/mm/copy_from_user.S +++ b/arch/hexagon/mm/copy_from_user.S @@ -1,7 +1,7 @@ /* * User memory copy functions for kernel * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/mm/copy_to_user.S b/arch/hexagon/mm/copy_to_user.S index cb9740ed9e7..0cfbcc09d1d 100644 --- a/arch/hexagon/mm/copy_to_user.S +++ b/arch/hexagon/mm/copy_to_user.S @@ -1,7 +1,7 @@ /* * User memory copying routines for the Hexagon Kernel * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/mm/copy_user_template.S b/arch/hexagon/mm/copy_user_template.S index 08d7d7b23da..254d8cc766b 100644 --- a/arch/hexagon/mm/copy_user_template.S +++ b/arch/hexagon/mm/copy_user_template.S @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/mm/init.c b/arch/hexagon/mm/init.c index b57d741750b..69ffcfd2879 100644 --- a/arch/hexagon/mm/init.c +++ b/arch/hexagon/mm/init.c @@ -1,7 +1,7 @@ /* * Memory subsystem initialization for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/mm/ioremap.c b/arch/hexagon/mm/ioremap.c index 3a37bc3b011..5905fd5f97f 100644 --- a/arch/hexagon/mm/ioremap.c +++ b/arch/hexagon/mm/ioremap.c @@ -1,7 +1,7 @@ /* * I/O remap functions for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/mm/pgalloc.c b/arch/hexagon/mm/pgalloc.c index b175e2d42b8..19760a4611d 100644 --- a/arch/hexagon/mm/pgalloc.c +++ b/arch/hexagon/mm/pgalloc.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/mm/strnlen_user.S b/arch/hexagon/mm/strnlen_user.S index 5c6a16c7c72..0eecb7a768f 100644 --- a/arch/hexagon/mm/strnlen_user.S +++ b/arch/hexagon/mm/strnlen_user.S @@ -1,7 +1,7 @@ /* * User string length functions for kernel * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/mm/uaccess.c b/arch/hexagon/mm/uaccess.c index e748108b47a..34127261c2b 100644 --- a/arch/hexagon/mm/uaccess.c +++ b/arch/hexagon/mm/uaccess.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/mm/vm_fault.c b/arch/hexagon/mm/vm_fault.c index 513b74cb397..308ef0ce648 100644 --- a/arch/hexagon/mm/vm_fault.c +++ b/arch/hexagon/mm/vm_fault.c @@ -1,7 +1,7 @@ /* * Memory fault handling for Hexagon * - * Copyright (c) 2010-2011 Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and diff --git a/arch/hexagon/mm/vm_tlb.c b/arch/hexagon/mm/vm_tlb.c index c6ff4157546..9647d00cb76 100644 --- a/arch/hexagon/mm/vm_tlb.c +++ b/arch/hexagon/mm/vm_tlb.c @@ -1,7 +1,7 @@ /* * Hexagon Virtual Machine TLB functions * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and -- cgit v1.2.3-70-g09d2 From 5bc66170dc486556a1e36fd384463536573f4b82 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 18 Oct 2012 15:10:56 +0200 Subject: x86, MCE: Remove bios_cmci_threshold sysfs attribute 450cc201038f3 ("x86/mce: Provide boot argument to honour bios-set CMCI threshold") added the bios_cmci_threshold sysfs attribute which was supposed to communicate to userspace tools that BIOS CMCI threshold has been honoured. However, this info is not of any importance to userspace - it should rather get the actual error count it has been thresholded already from MCi_STATUS[38:52]. So drop this before it becomes a used interface (good thing we caught this early in 3.7-rc1, right after the merge window closed). Cc: Naveen N. Rao Acked-by: Tony Luck Link: http://lkml.kernel.org/r/20121017105940.GA14590@x1.osrc.amd.com Signed-off-by: Borislav Petkov --- arch/x86/kernel/cpu/mcheck/mce.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 29e87d3b284..46cbf868969 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -2209,11 +2209,6 @@ static struct dev_ext_attribute dev_attr_cmci_disabled = { &mce_cmci_disabled }; -static struct dev_ext_attribute dev_attr_bios_cmci_threshold = { - __ATTR(bios_cmci_threshold, 0444, device_show_int, NULL), - &mce_bios_cmci_threshold -}; - static struct device_attribute *mce_device_attrs[] = { &dev_attr_tolerant.attr, &dev_attr_check_interval.attr, @@ -2222,7 +2217,6 @@ static struct device_attribute *mce_device_attrs[] = { &dev_attr_dont_log_ce.attr, &dev_attr_ignore_ce.attr, &dev_attr_cmci_disabled.attr, - &dev_attr_bios_cmci_threshold.attr, NULL }; -- cgit v1.2.3-70-g09d2 From e2a666d52b4825c26c857cada211f3baac26a600 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 19 Oct 2012 11:53:15 +1030 Subject: kbuild: sign the modules at install time Linus deleted the old code and put signing on the install command, I fixed it to extract the keyid and signer-name within sign-file and cleaned up that script now it always signs in-place. Some enthusiast should convert sign-key to perl and pull x509keyid into it. Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- Makefile | 11 +++++++ scripts/Makefile.modinst | 2 +- scripts/Makefile.modpost | 77 +----------------------------------------------- scripts/sign-file | 44 +++++++++++---------------- scripts/x509keyid | 16 +++++----- 5 files changed, 39 insertions(+), 111 deletions(-) diff --git a/Makefile b/Makefile index 366d0ab0c5f..4fd82f7fc0b 100644 --- a/Makefile +++ b/Makefile @@ -719,6 +719,17 @@ endif # INSTALL_MOD_STRIP export mod_strip_cmd +ifeq ($(CONFIG_MODULE_SIG),y) +MODSECKEY = ./signing_key.priv +MODPUBKEY = ./signing_key.x509 +export MODPUBKEY +mod_sign_cmd = sh $(srctree)/scripts/sign-file $(MODSECKEY) $(MODPUBKEY) $(srctree)/scripts/x509keyid +else +mod_sign_cmd = true +endif +export mod_sign_cmd + + ifeq ($(KBUILD_EXTMOD),) core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/ diff --git a/scripts/Makefile.modinst b/scripts/Makefile.modinst index 3d13d3a3edf..dda4b2b6192 100644 --- a/scripts/Makefile.modinst +++ b/scripts/Makefile.modinst @@ -17,7 +17,7 @@ __modinst: $(modules) @: quiet_cmd_modules_install = INSTALL $@ - cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@) + cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@) ; $(mod_sign_cmd) $(2)/$(notdir $@) # Modules built outside the kernel source tree go into extra by default INSTALL_MOD_DIR ?= extra diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index 002089141df..a1cb0222ebe 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -14,8 +14,7 @@ # 3) create one .mod.c file pr. module # 4) create one Module.symvers file with CRC for all exported symbols # 5) compile all .mod.c files -# 6) final link of the module to a (or ) file -# 7) signs the modules to a file +# 6) final link of the module to a file # Step 3 is used to place certain information in the module's ELF # section, including information such as: @@ -33,8 +32,6 @@ # Step 4 is solely used to allow module versioning in external modules, # where the CRC of each module is retrieved from the Module.symvers file. -# Step 7 is dependent on CONFIG_MODULE_SIG being enabled. - # KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined # symbols in the final module linking stage # KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules. @@ -119,7 +116,6 @@ $(modules:.ko=.mod.o): %.mod.o: %.mod.c FORCE targets += $(modules:.ko=.mod.o) # Step 6), final link of the modules -ifneq ($(CONFIG_MODULE_SIG),y) quiet_cmd_ld_ko_o = LD [M] $@ cmd_ld_ko_o = $(LD) -r $(LDFLAGS) \ $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE) \ @@ -129,78 +125,7 @@ $(modules): %.ko :%.o %.mod.o FORCE $(call if_changed,ld_ko_o) targets += $(modules) -else -quiet_cmd_ld_ko_unsigned_o = LD [M] $@ - cmd_ld_ko_unsigned_o = \ - $(LD) -r $(LDFLAGS) \ - $(KBUILD_LDFLAGS_MODULE) $(LDFLAGS_MODULE) \ - -o $@ $(filter-out FORCE,$^) \ - $(if $(AFTER_LINK),; $(AFTER_LINK)) - -$(modules:.ko=.ko.unsigned): %.ko.unsigned :%.o %.mod.o FORCE - $(call if_changed,ld_ko_unsigned_o) - -targets += $(modules:.ko=.ko.unsigned) - -# Step 7), sign the modules -MODSECKEY = ./signing_key.priv -MODPUBKEY = ./signing_key.x509 - -ifeq ($(wildcard $(MODSECKEY))+$(wildcard $(MODPUBKEY)),$(MODSECKEY)+$(MODPUBKEY)) -ifeq ($(KBUILD_SRC),) - # no O= is being used - SCRIPTS_DIR := scripts -else - SCRIPTS_DIR := $(KBUILD_SRC)/scripts -endif -SIGN_MODULES := 1 -else -SIGN_MODULES := 0 -endif - -# only sign if it's an in-tree module -ifneq ($(KBUILD_EXTMOD),) -SIGN_MODULES := 0 -endif -# We strip the module as best we can - note that using both strip and eu-strip -# results in a smaller module than using either alone. -EU_STRIP = $(shell which eu-strip || echo true) - -quiet_cmd_sign_ko_stripped_ko_unsigned = STRIP [M] $@ - cmd_sign_ko_stripped_ko_unsigned = \ - cp $< $@ && \ - strip -x -g $@ && \ - $(EU_STRIP) $@ - -ifeq ($(SIGN_MODULES),1) - -quiet_cmd_genkeyid = GENKEYID $@ - cmd_genkeyid = \ - perl $(SCRIPTS_DIR)/x509keyid $< $<.signer $<.keyid - -%.signer %.keyid: % - $(call if_changed,genkeyid) - -KEYRING_DEP := $(MODSECKEY) $(MODPUBKEY) $(MODPUBKEY).signer $(MODPUBKEY).keyid -quiet_cmd_sign_ko_ko_stripped = SIGN [M] $@ - cmd_sign_ko_ko_stripped = \ - sh $(SCRIPTS_DIR)/sign-file $(MODSECKEY) $(MODPUBKEY) $< $@ -else -KEYRING_DEP := -quiet_cmd_sign_ko_ko_unsigned = NO SIGN [M] $@ - cmd_sign_ko_ko_unsigned = \ - cp $< $@ -endif - -$(modules): %.ko :%.ko.stripped $(KEYRING_DEP) FORCE - $(call if_changed,sign_ko_ko_stripped) - -$(patsubst %.ko,%.ko.stripped,$(modules)): %.ko.stripped :%.ko.unsigned FORCE - $(call if_changed,sign_ko_stripped_ko_unsigned) - -targets += $(modules) -endif # Add FORCE to the prequisites of a target to force it to be always rebuilt. # --------------------------------------------------------------------------- diff --git a/scripts/sign-file b/scripts/sign-file index e58e34e50ac..095a953bdb8 100644 --- a/scripts/sign-file +++ b/scripts/sign-file @@ -1,8 +1,8 @@ -#!/bin/sh +#!/bin/bash # # Sign a module file using the given key. # -# Format: sign-file +# Format: sign-file # scripts=`dirname $0` @@ -15,8 +15,8 @@ fi key="$1" x509="$2" -src="$3" -dst="$4" +keyid_script="$3" +mod="$4" if [ ! -r "$key" ] then @@ -29,16 +29,6 @@ then echo "Can't read X.509 certificate" >&2 exit 2 fi -if [ ! -r "$x509.signer" ] -then - echo "Can't read Signer name" >&2 - exit 2; -fi -if [ ! -r "$x509.keyid" ] -then - echo "Can't read Key identifier" >&2 - exit 2; -fi # # Signature parameters @@ -83,33 +73,35 @@ fi ( perl -e "binmode STDOUT; print pack(\"C*\", $prologue)" || exit $? -openssl dgst $dgst -binary $src || exit $? -) >$src.dig || exit $? +openssl dgst $dgst -binary $mod || exit $? +) >$mod.dig || exit $? # # Generate the binary signature, which will be just the integer that comprises # the signature with no metadata attached. # -openssl rsautl -sign -inkey $key -keyform PEM -in $src.dig -out $src.sig || exit $? -signerlen=`stat -c %s $x509.signer` -keyidlen=`stat -c %s $x509.keyid` -siglen=`stat -c %s $src.sig` +openssl rsautl -sign -inkey $key -keyform PEM -in $mod.dig -out $mod.sig || exit $? + +SIGNER="`perl $keyid_script $x509 signer-name`" +KEYID="`perl $keyid_script $x509 keyid`" +keyidlen=${#KEYID} +siglen=${#SIGNER} # # Build the signed binary # ( - cat $src || exit $? + cat $mod || exit $? echo '~Module signature appended~' || exit $? - cat $x509.signer $x509.keyid || exit $? + echo -n "$SIGNER" || exit $? + echo -n "$KEYID" || exit $? # Preface each signature integer with a 2-byte BE length perl -e "binmode STDOUT; print pack(\"n\", $siglen)" || exit $? - cat $src.sig || exit $? + cat $mod.sig || exit $? # Generate the information block perl -e "binmode STDOUT; print pack(\"CCCCCxxxN\", $algo, $hash, $id_type, $signerlen, $keyidlen, $siglen + 2)" || exit $? -) >$dst~ || exit $? +) >$mod~ || exit $? -# Permit in-place signing -mv $dst~ $dst || exit $? +mv $mod~ $mod || exit $? diff --git a/scripts/x509keyid b/scripts/x509keyid index c8e91a4af38..4241ec6c64b 100755 --- a/scripts/x509keyid +++ b/scripts/x509keyid @@ -22,7 +22,7 @@ use strict; my $raw_data; -die "Need three filenames\n" if ($#ARGV != 2); +die "Need a filename [keyid|signer-name]\n" if ($#ARGV != 1); my $src = $ARGV[0]; @@ -259,10 +259,10 @@ die $src, ": ", "X.509: Couldn't find the Subject Key Identifier extension\n" my $id_key_id = asn1_retrieve($subject_key_id->[1]); -open(OUTFD, ">$ARGV[1]") || die $ARGV[1]; -print OUTFD $id_name; -close OUTFD || die $ARGV[1]; - -open(OUTFD, ">$ARGV[2]") || die $ARGV[2]; -print OUTFD $id_key_id; -close OUTFD || die $ARGV[2]; +if ($ARGV[1] eq "signer-name") { + print $id_name; +} elsif ($ARGV[1] eq "keyid") { + print $id_key_id; +} else { + die "Unknown arg"; +} -- cgit v1.2.3-70-g09d2 From 39070cb8a39a84f3379dd8d1dab489e06f3a50a7 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Wed, 17 Oct 2012 23:08:20 -0700 Subject: xtensa: minor compiler warning fix Fix two compiler warnings complaining about truncating a value on a 64-bit host, and about declaring an unused variable that is only used for a specific configuration. Signed-off-by: Chris Zankel --- arch/xtensa/kernel/entry.S | 2 +- arch/xtensa/kernel/process.c | 5 ++++- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 30b5c5f7b7e..18453067c25 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -1542,7 +1542,7 @@ ENTRY(fast_second_level_miss) * pteval = ((pmdval - PAGE_OFFSET) & PAGE_MASK) | PAGE_DIRECTORY */ - movi a1, -PAGE_OFFSET + movi a1, (-PAGE_OFFSET) & 0xffffffff add a0, a0, a1 # pmdval - PAGE_OFFSET extui a1, a0, 0, PAGE_SHIFT # ... & PAGE_MASK xor a0, a0, a1 diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index 7901ee76b9b..1908f6642d3 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -190,10 +190,13 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, struct task_struct * p, struct pt_regs * regs) { struct pt_regs *childregs; - struct thread_info *ti; unsigned long tos; int user_mode = user_mode(regs); +#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS) + struct thread_info *ti; +#endif + /* Set up new TSS. */ tos = (unsigned long)task_stack_page(p) + THREAD_SIZE; if (user_mode) -- cgit v1.2.3-70-g09d2 From 7216cabfff5149670445cd65d415ed5db21314b4 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Fri, 19 Oct 2012 10:46:44 -0700 Subject: xtensa: add missing system calls to the syscall table Add the following system calls to the syscall table: fallocate sendmmsg umount2 syncfs epoll_create1 inotify_init1 signalfd4 dup3 pipe2 timerfd_create timerfd_settime timerfd_gettime eventfd2 preadv pwritev fanotify_init fanotify_mark process_vm_readv process_vm_writev name_to_handle_at open_by_handle_at sync_file_range perf_event_open rt_tgsigqueueinfo clock_adjtime prlimit64 kcmp Note that we have to use the 'sys_sync_file_range2' version, so that the 64-bit arguments are aligned correctly to the argument registers. Signed-off-by: Chris Zankel --- arch/xtensa/include/uapi/asm/unistd.h | 98 ++++++++++++++++++++++++++++------- 1 file changed, 78 insertions(+), 20 deletions(-) diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h index a842ed51921..479abaea5aa 100644 --- a/arch/xtensa/include/uapi/asm/unistd.h +++ b/arch/xtensa/include/uapi/asm/unistd.h @@ -5,9 +5,12 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001 - 2005 Tensilica Inc. + * Copyright (C) 2001 - 2012 Tensilica Inc. */ +#ifndef _UAPI_XTENSA_UNISTD_H +#define _UAPI_XTENSA_UNISTD_H + #ifndef __SYSCALL # define __SYSCALL(nr,func,nargs) #endif @@ -145,8 +148,8 @@ __SYSCALL( 59, sys_getdents, 3) __SYSCALL( 60, sys_getdents64, 3) #define __NR_fcntl64 61 __SYSCALL( 61, sys_fcntl64, 3) -#define __NR_available62 62 -__SYSCALL( 62, sys_ni_syscall, 0) +#define __NR_fallocate 62 +__SYSCALL( 62, sys_fallocate, 6) #define __NR_fadvise64_64 63 __SYSCALL( 63, xtensa_fadvise64_64, 6) #define __NR_utime 64 /* glibc 2.3.3 ?? */ @@ -261,8 +264,8 @@ __SYSCALL(112, sys_socketpair, 4) __SYSCALL(113, sys_sendfile, 4) #define __NR_sendfile64 114 __SYSCALL(114, sys_sendfile64, 4) -#define __NR_available115 115 -__SYSCALL(115, sys_ni_syscall, 0) +#define __NR_sendmmsg 115 +__SYSCALL(115, sys_sendmmsg, 4) /* Process Operations */ @@ -377,11 +380,11 @@ __SYSCALL(168, sys_msgrcv, 4) __SYSCALL(169, sys_msgctl, 4) #define __NR_available170 170 __SYSCALL(170, sys_ni_syscall, 0) -#define __NR_available171 171 -__SYSCALL(171, sys_ni_syscall, 0) /* File System */ +#define __NR_umount2 171 +__SYSCALL(171, sys_umount, 2) #define __NR_mount 172 __SYSCALL(172, sys_mount, 5) #define __NR_swapon 173 @@ -396,8 +399,8 @@ __SYSCALL(176, sys_umount, 2) __SYSCALL(177, sys_swapoff, 1) #define __NR_sync 178 __SYSCALL(178, sys_sync, 0) -#define __NR_available179 179 -__SYSCALL(179, sys_ni_syscall, 0) +#define __NR_syncfs 179 +__SYSCALL(179, sys_syncfs, 1) #define __NR_setfsuid 180 __SYSCALL(180, sys_setfsuid, 1) #define __NR_setfsgid 181 @@ -452,7 +455,7 @@ __SYSCALL(203, sys_reboot, 3) #define __NR_quotactl 204 __SYSCALL(204, sys_quotactl, 4) #define __NR_nfsservctl 205 -__SYSCALL(205, sys_ni_syscall, 0) +__SYSCALL(205, sys_ni_syscall, 0) /* old nfsservctl */ #define __NR__sysctl 206 __SYSCALL(206, sys_sysctl, 1) #define __NR_bdflush 207 @@ -559,7 +562,7 @@ __SYSCALL(252, sys_timer_getoverrun, 1) /* System */ -#define __NR_reserved244 253 +#define __NR_reserved253 253 __SYSCALL(253, sys_ni_syscall, 0) #define __NR_lookup_dcookie 254 __SYSCALL(254, sys_lookup_dcookie, 4) @@ -606,8 +609,8 @@ __SYSCALL(272, sys_pselect6, 0) __SYSCALL(273, sys_ppoll, 0) #define __NR_epoll_pwait 274 __SYSCALL(274, sys_epoll_pwait, 0) -#define __NR_available275 275 -__SYSCALL(275, sys_ni_syscall, 0) +#define __NR_epoll_create1 275 +__SYSCALL(275, sys_epoll_create1, 1) #define __NR_inotify_init 276 __SYSCALL(276, sys_inotify_init, 0) @@ -615,8 +618,8 @@ __SYSCALL(276, sys_inotify_init, 0) __SYSCALL(277, sys_inotify_add_watch, 3) #define __NR_inotify_rm_watch 278 __SYSCALL(278, sys_inotify_rm_watch, 2) -#define __NR_available279 279 -__SYSCALL(279, sys_ni_syscall, 0) +#define __NR_inotify_init1 279 +__SYSCALL(279, sys_inotify_init1, 1) #define __NR_getcpu 280 __SYSCALL(280, sys_getcpu, 0) @@ -632,10 +635,10 @@ __SYSCALL(283, sys_ioprio_get, 3) __SYSCALL(284, sys_set_robust_list, 3) #define __NR_get_robust_list 285 __SYSCALL(285, sys_get_robust_list, 3) -#define __NR_reserved286 286 /* sync_file_rangeX */ -__SYSCALL(286, sys_ni_syscall, 3) +#define __NR_available286 286 +__SYSCALL(286, sys_ni_syscall, 0) #define __NR_available287 287 -__SYSCALL(287, sys_faccessat, 0) +__SYSCALL(287, sys_ni_syscall, 0) /* Relative File Operations */ @@ -680,10 +683,63 @@ __SYSCALL(305, sys_ni_syscall, 0) __SYSCALL(306, sys_eventfd, 1) #define __NR_recvmmsg 307 __SYSCALL(307, sys_recvmmsg, 5) + #define __NR_setns 308 __SYSCALL(308, sys_setns, 2) - -#define __NR_syscall_count 309 +#define __NR_signalfd4 309 +__SYSCALL(309, sys_signalfd4, 4) +#define __NR_dup3 310 +__SYSCALL(310, sys_dup3, 3) +#define __NR_pipe2 311 +__SYSCALL(311, sys_pipe2, 2) + +#define __NR_timerfd_create 312 +__SYSCALL(312, sys_timerfd_create, 2) +#define __NR_timerfd_settime 313 +__SYSCALL(313, sys_timerfd_settime, 4) +#define __NR_timerfd_gettime 314 +__SYSCALL(314, sys_timerfd_gettime, 2) +#define __NR_available315 315 +__SYSCALL(315, sys_ni_syscall, 0) + +#define __NR_eventfd2 316 +__SYSCALL(316, sys_eventfd2, 2) +#define __NR_preadv 317 +__SYSCALL(317, sys_preadv, 5) +#define __NR_pwritev 318 +__SYSCALL(318, sys_pwritev, 5) +#define __NR_available319 319 +__SYSCALL(319, sys_ni_syscall, 0) + +#define __NR_fanotify_init 320 +__SYSCALL(320, sys_fanotify_init, 2) +#define __NR_fanotify_mark 321 +__SYSCALL(321, sys_fanotify_mark, 6) +#define __NR_process_vm_readv 322 +__SYSCALL(322, sys_process_vm_readv, 6) +#define __NR_process_vm_writev 323 +__SYSCALL(323, sys_process_vm_writev, 6) + +#define __NR_name_to_handle_at 324 +__SYSCALL(324, sys_name_to_handle_at, 5) +#define __NR_open_by_handle_at 325 +__SYSCALL(325, sys_open_by_handle_at, 3) +#define __NR_sync_file_range 326 +__SYSCALL(326, sys_sync_file_range2, 6) +#define __NR_perf_event_open 327 +__SYSCALL(327, sys_perf_event_open, 5) + +#define __NR_rt_tgsigqueueinfo 328 +__SYSCALL(328, sys_rt_tgsigqueueinfo, 4) +#define __NR_clock_adjtime 329 +__SYSCALL(329, sys_clock_adjtime, 2) +#define __NR_prlimit64 330 +__SYSCALL(330, sys_prlimit64, 4) +#define __NR_kcmp 331 +__SYSCALL(331, sys_kcmp, 5) + + +#define __NR_syscall_count 332 /* * sysxtensa syscall handler @@ -702,3 +758,5 @@ __SYSCALL(308, sys_setns, 2) #define SYS_XTENSA_ATOMIC_CMP_SWP 4 /* compare and swap */ #define SYS_XTENSA_COUNT 5 /* count */ + +#endif /* _UAPI_XTENSA_UNISTD_H */ -- cgit v1.2.3-70-g09d2 From d479c911789e14a19b86ca09b0b634f1449c8c6b Mon Sep 17 00:00:00 2001 From: Ben Collins Date: Fri, 19 Oct 2012 10:24:12 -0400 Subject: USB: ehci-fsl: Return valid error in ehci_fsl_setup_phy ehci_fsl_setup_phy is supposed to return an int, but had a void return value in the case of controller_ver being invalid. Introduced by commit 3735ba8db8e6 ("powerpc/usb: fix bug of CPU hang when missing USB PHY clock"), which missed one return. Signed-off-by: Ben Collins Cc: Shengzhou Liu Cc: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/host/ehci-fsl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 9bfde82078e..0d2f35ca93f 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -222,7 +222,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, if (pdata->controller_ver < 0) { dev_warn(hcd->self.controller, "Could not get controller version\n"); - return; + return -ENODEV; } portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]); -- cgit v1.2.3-70-g09d2 From ea26d0cff44420052495731af34fcab561d3953a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 19 Oct 2012 07:11:44 +0200 Subject: MAINTAINERS: Add Rafael's address to ACPI maintainers Since I will be maintaining ACPI together with Len from now on, add my address to the ACPI maintainers list in the MAINTAINERS file (this is the address to send patches to). Signed-off-by: Rafael J. Wysocki Acked-by: Len Brown Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 41c53491db6..8f18ba081ed 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -235,6 +235,7 @@ F: drivers/platform/x86/acer-wmi.c ACPI M: Len Brown +M: Rafael J. Wysocki L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ Q: http://patchwork.kernel.org/project/linux-acpi/list/ -- cgit v1.2.3-70-g09d2 From 16757372ffa5ee0ef7e82f73a6adbb054a434a13 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 19 Oct 2012 11:54:21 -0700 Subject: xen: Fix annoying compile-time warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit cb6b6df111e4 ("xen/pv-on-hvm kexec: add quirk for Xen 3.4 and shutdown watches.") added the xen_strict_xenbus_quirk() function with an old K&R-style declaration without proper typing, causing gcc to rightly complain: drivers/xen/xenbus/xenbus_xs.c:628:13: warning: function declaration isn’t a prototype [-Wstrict-prototypes] because we really don't live in caves using stone-age tools any more, and the kernel has always used properly typed ANSI C function declarations. So if a function doesn't take arguments, we tell the compiler so explicitly by adding the proper "void" in the prototype. I'm sure there are tons of other examples of this kind of stuff in the tree, but this is the one that hits my workstation config, so.. Signed-off-by: Linus Torvalds --- drivers/xen/xenbus/xenbus_xs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c index 48220e129f8..f5dda83ad7a 100644 --- a/drivers/xen/xenbus/xenbus_xs.c +++ b/drivers/xen/xenbus/xenbus_xs.c @@ -625,7 +625,7 @@ static struct xenbus_watch *find_watch(const char *token) * so if we are running on anything older than 4 do not attempt to read * control/platform-feature-xs_reset_watches. */ -static bool xen_strict_xenbus_quirk() +static bool xen_strict_xenbus_quirk(void) { uint32_t eax, ebx, ecx, edx, base; -- cgit v1.2.3-70-g09d2 From b05e585d4964cf0a70573d29113a1236ced98abf Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 19 Oct 2012 12:43:19 -0700 Subject: kbuild: Fix module signature generation Rusty had clearly not actually tested his module signing changes that I (trustingly) applied as commit e2a666d52b48 ("kbuild: sign the modules at install time"). That commit had multiple bugs: - using "${#VARIABLE}" to get the number of characters in a shell variable may look clever, but it's locale-dependent: it returns the number of *characters*, not bytes. And we do need bytes. So don't use "${#..}" expansion, do the stupid "wc -c" thing instead (where "c" stands for "bytes", not "characters", despite the letter. - Rusty had confused "siglen" and "signerlen", and his conversion didn't set "signerlen" at all, and incorrectly set "siglen" to the size of the signer, not the size of the signature. End result: the modified sign-file script did create something that superficially *looked* like a signature, but didn't actually work at all, and would fail the signature check. Oops. Tssk, tssk, Rusty. But Rusty was definitely right that this whole thing should be rewritten in perl by somebody who has the perl-fu to do so. That is not me, though - I'm just doing an emergency fix for the shell script. Cc: Rusty Russell Signed-off-by: Linus Torvalds --- scripts/sign-file | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/scripts/sign-file b/scripts/sign-file index 095a953bdb8..d014abd11f1 100644 --- a/scripts/sign-file +++ b/scripts/sign-file @@ -81,11 +81,12 @@ openssl dgst $dgst -binary $mod || exit $? # the signature with no metadata attached. # openssl rsautl -sign -inkey $key -keyform PEM -in $mod.dig -out $mod.sig || exit $? +siglen=`stat -c %s $mod.sig` SIGNER="`perl $keyid_script $x509 signer-name`" KEYID="`perl $keyid_script $x509 keyid`" -keyidlen=${#KEYID} -siglen=${#SIGNER} +keyidlen=$(echo -n "$KEYID" | wc -c) +signerlen=$(echo -n "$SIGNER" | wc -c) # # Build the signed binary -- cgit v1.2.3-70-g09d2 From deb521c44fa529b24cc78a64702757a683f82487 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 19 Oct 2012 13:37:57 -0700 Subject: remap_file_pages: correctly handle the case of a NULL vm_ops pointer In commit 0b173bc4daa8 ("mm: kill vma flag VM_CAN_NONLINEAR") we replaced the VM_CAN_NONLINEAR test with checking whether the mapping has a '->remap_pages()' vm operation, but there is no guarantee that there it even has a vm_ops pointer at all. Add the appropriate test for NULL vm_ops. Reported-by: Sasha Levin Cc: Konstantin Khlebnikov Cc: Andrew Morton Signed-off-by: Linus Torvalds --- mm/fremap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/fremap.c b/mm/fremap.c index 3899a86851c..a0aaf0e5680 100644 --- a/mm/fremap.c +++ b/mm/fremap.c @@ -169,7 +169,7 @@ SYSCALL_DEFINE5(remap_file_pages, unsigned long, start, unsigned long, size, if (vma->vm_private_data && !(vma->vm_flags & VM_NONLINEAR)) goto out; - if (!vma->vm_ops->remap_pages) + if (!vma->vm_ops || !vma->vm_ops->remap_pages) goto out; if (start < vma->vm_start || start + size > vma->vm_end) -- cgit v1.2.3-70-g09d2 From 1d46e232f8637f31f8df2e50b27fd20d8135bd93 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Fri, 19 Oct 2012 13:56:47 -0700 Subject: linux/coredump.h needs asm/siginfo.h Commit 5ab1c309b344 ("coredump: pass siginfo_t* to do_coredump() and below, not merely signr") added siginfo_t to linux/coredump.h but forgot to include asm/siginfo.h. This breaks the build for UML/i386. (And any other arch where asm/siginfo.h is not magically preincluded...) In file included from arch/x86/um/elfcore.c:2:0: include/linux/coredump.h:15:25: error: unknown type name 'siginfo_t' make[1]: *** [arch/x86/um/elfcore.o] Error 1 Signed-off-by: Richard Weinberger Cc: Denys Vlasenko Cc: Oleg Nesterov Cc: Amerigo Wang Cc: "Jonathan M. Foote" Cc: Roland McGrath Cc: Pedro Alves Cc: Fengguang Wu Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/coredump.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/coredump.h b/include/linux/coredump.h index 1775eb8acc0..1d7399314a8 100644 --- a/include/linux/coredump.h +++ b/include/linux/coredump.h @@ -4,6 +4,7 @@ #include #include #include +#include /* * These are the only things you should do on a core-file: use only these -- cgit v1.2.3-70-g09d2 From 2702b1526c7278c4d65d78de209a465d4de2885e Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 19 Oct 2012 13:56:51 -0700 Subject: kernel/sys.c: fix stack memory content leak via UNAME26 Calling uname() with the UNAME26 personality set allows a leak of kernel stack contents. This fixes it by defensively calculating the length of copy_to_user() call, making the len argument unsigned, and initializing the stack buffer to zero (now technically unneeded, but hey, overkill). CVE-2012-0957 Reported-by: PaX Team Signed-off-by: Kees Cook Cc: Andi Kleen Cc: PaX Team Cc: Brad Spengler Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/sys.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/kernel/sys.c b/kernel/sys.c index c5cb5b99cb8..01865c6fb6a 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -1265,15 +1265,16 @@ DECLARE_RWSEM(uts_sem); * Work around broken programs that cannot handle "Linux 3.0". * Instead we map 3.x to 2.6.40+x, so e.g. 3.0 would be 2.6.40 */ -static int override_release(char __user *release, int len) +static int override_release(char __user *release, size_t len) { int ret = 0; - char buf[65]; if (current->personality & UNAME26) { - char *rest = UTS_RELEASE; + const char *rest = UTS_RELEASE; + char buf[65] = { 0 }; int ndots = 0; unsigned v; + size_t copy; while (*rest) { if (*rest == '.' && ++ndots >= 3) @@ -1283,8 +1284,9 @@ static int override_release(char __user *release, int len) rest++; } v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 40; - snprintf(buf, len, "2.6.%u%s", v, rest); - ret = copy_to_user(release, buf, len); + copy = min(sizeof(buf), max_t(size_t, 1, len)); + copy = scnprintf(buf, copy, "2.6.%u%s", v, rest); + ret = copy_to_user(release, buf, copy + 1); } return ret; } -- cgit v1.2.3-70-g09d2 From dc36d7e7cd422d69b15e7ec7cc1f021f581a6b6d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 19 Oct 2012 13:56:52 -0700 Subject: drivers/video/backlight/lm3639_bl.c: return proper error in lm3639_bled_mode_store() error paths Signed-off-by: Axel Lin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/lm3639_bl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/backlight/lm3639_bl.c b/drivers/video/backlight/lm3639_bl.c index c6915c6c3cd..585949b5705 100644 --- a/drivers/video/backlight/lm3639_bl.c +++ b/drivers/video/backlight/lm3639_bl.c @@ -206,11 +206,11 @@ static ssize_t lm3639_bled_mode_store(struct device *dev, out: dev_err(pchip->dev, "%s:i2c access fail to register\n", __func__); - return size; + return ret; out_input: dev_err(pchip->dev, "%s:input conversion fail\n", __func__); - return size; + return ret; } -- cgit v1.2.3-70-g09d2 From bbc2e3ef87851bc5430b2b4cf4ca3a2f29baeda6 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Fri, 19 Oct 2012 13:56:53 -0700 Subject: pidns: remove recursion from free_pid_ns() free_pid_ns() operates in a recursive fashion: free_pid_ns(parent) put_pid_ns(parent) kref_put(&ns->kref, free_pid_ns); free_pid_ns thus if there was a huge nesting of namespaces the userspace may trigger avalanche calling of free_pid_ns leading to kernel stack exhausting and a panic eventually. This patch turns the recursion into an iterative loop. Based on a patch by Andrew Vagin. [akpm@linux-foundation.org: export put_pid_ns() to modules] Signed-off-by: Cyrill Gorcunov Cc: Andrew Vagin Cc: Oleg Nesterov Cc: "Eric W. Biederman" Cc: Pavel Emelyanov Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pid_namespace.h | 8 +------- kernel/pid_namespace.c | 21 ++++++++++++++------- 2 files changed, 15 insertions(+), 14 deletions(-) diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index 00474b04714..65e3e87eacc 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -47,15 +47,9 @@ static inline struct pid_namespace *get_pid_ns(struct pid_namespace *ns) } extern struct pid_namespace *copy_pid_ns(unsigned long flags, struct pid_namespace *ns); -extern void free_pid_ns(struct kref *kref); extern void zap_pid_ns_processes(struct pid_namespace *pid_ns); extern int reboot_pid_ns(struct pid_namespace *pid_ns, int cmd); - -static inline void put_pid_ns(struct pid_namespace *ns) -{ - if (ns != &init_pid_ns) - kref_put(&ns->kref, free_pid_ns); -} +extern void put_pid_ns(struct pid_namespace *ns); #else /* !CONFIG_PID_NS */ #include diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index 478bad2745e..eb00be20581 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -133,19 +133,26 @@ struct pid_namespace *copy_pid_ns(unsigned long flags, struct pid_namespace *old return create_pid_namespace(old_ns); } -void free_pid_ns(struct kref *kref) +static void free_pid_ns(struct kref *kref) { - struct pid_namespace *ns, *parent; + struct pid_namespace *ns; ns = container_of(kref, struct pid_namespace, kref); - - parent = ns->parent; destroy_pid_namespace(ns); +} - if (parent != NULL) - put_pid_ns(parent); +void put_pid_ns(struct pid_namespace *ns) +{ + struct pid_namespace *parent; + + while (ns != &init_pid_ns) { + parent = ns->parent; + if (!kref_put(&ns->kref, free_pid_ns)) + break; + ns = parent; + } } -EXPORT_SYMBOL_GPL(free_pid_ns); +EXPORT_SYMBOL_GPL(put_pid_ns); void zap_pid_ns_processes(struct pid_namespace *pid_ns) { -- cgit v1.2.3-70-g09d2 From bac716966094e39c8027428993a57b79f2dd6c97 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Fri, 19 Oct 2012 13:56:55 -0700 Subject: firmware/memmap: avoid type conflicts with the generic memmap_init() Fix this build error: drivers/firmware/memmap.c:240:19: error: conflicting types for 'memmap_init' arch/ia64/include/asm/pgtable.h:565:17: note: previous declaration of 'memmap_init' was here Signed-off-by: Fengguang Wu Cc: Bernhard Walle Cc: Glauber Costa Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/firmware/memmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c index c1cdc923666..90723e65b08 100644 --- a/drivers/firmware/memmap.c +++ b/drivers/firmware/memmap.c @@ -237,7 +237,7 @@ static ssize_t memmap_attr_show(struct kobject *kobj, * firmware_map_add() or firmware_map_add_early() afterwards, the entries * are not added to sysfs. */ -static int __init memmap_init(void) +static int __init firmware_memmap_init(void) { struct firmware_map_entry *entry; @@ -246,5 +246,5 @@ static int __init memmap_init(void) return 0; } -late_initcall(memmap_init); +late_initcall(firmware_memmap_init); -- cgit v1.2.3-70-g09d2 From 0db63d7e25f96e2c6da925c002badf6f144ddf30 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Fri, 19 Oct 2012 13:56:57 -0700 Subject: mm: compaction: correct the nr_strict va isolated check for CMA Thierry reported that the "iron out" patch for isolate_freepages_block() had problems due to the strict check being too strict with "mm: compaction: Iron out isolate_freepages_block() and isolate_freepages_range() -fix1". It's possible that more pages than necessary are isolated but the check still fails and I missed that this fix was not picked up before RC1. This same problem has been identified in 3.7-RC1 by Tony Prisk and should be addressed by the following patch. Signed-off-by: Mel Gorman Tested-by: Tony Prisk Reported-by: Thierry Reding Acked-by: Rik van Riel Acked-by: Minchan Kim Cc: Richard Davies Cc: Shaohua Li Cc: Avi Kivity Cc: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/compaction.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/compaction.c b/mm/compaction.c index 2c4ce17651d..9eef55838fc 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -346,7 +346,7 @@ static unsigned long isolate_freepages_block(struct compact_control *cc, * pages requested were isolated. If there were any failures, 0 is * returned and CMA will fail. */ - if (strict && nr_strict_required != total_isolated) + if (strict && nr_strict_required > total_isolated) total_isolated = 0; if (locked) -- cgit v1.2.3-70-g09d2 From fe73fbe1c5eda709084dedb66cbdd4b86826cce7 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 19 Oct 2012 13:57:01 -0700 Subject: lib/dma-debug.c: fix __hash_bucket_find() If there is only one match, the unique matched entry should be returned. Without the fix, the upcoming dma debug interfaces ("dma-debug: new interfaces to debug dma mapping errors") can't work reliably because only device and dma_addr are passed to dma_mapping_error(). Signed-off-by: Ming Lei Reported-by: Wu Fengguang Cc: Joerg Roedel Tested-by: Shuah Khan Cc: Paul Gortmaker Cc: Jakub Kicinski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/dma-debug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/dma-debug.c b/lib/dma-debug.c index b9087bff008..d84beb994f3 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -264,7 +264,7 @@ static struct dma_debug_entry *__hash_bucket_find(struct hash_bucket *bucket, match_fn match) { struct dma_debug_entry *entry, *ret = NULL; - int matches = 0, match_lvl, last_lvl = 0; + int matches = 0, match_lvl, last_lvl = -1; list_for_each_entry(entry, &bucket->list, list) { if (!match(ref, entry)) @@ -293,7 +293,7 @@ static struct dma_debug_entry *__hash_bucket_find(struct hash_bucket *bucket, } else if (match_lvl > last_lvl) { /* * We found an entry that fits better then the - * previous one + * previous one or it is the 1st match. */ last_lvl = match_lvl; ret = entry; -- cgit v1.2.3-70-g09d2 From 9e7814404b77c3e8920bee4277162bf3a7460505 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Fri, 19 Oct 2012 17:00:55 +0900 Subject: hold task->mempolicy while numa_maps scans. /proc//numa_maps scans vma and show mempolicy under mmap_sem. It sometimes accesses task->mempolicy which can be freed without mmap_sem and numa_maps can show some garbage while scanning. This patch tries to take reference count of task->mempolicy at reading numa_maps before calling get_vma_policy(). By this, task->mempolicy will not be freed until numa_maps reaches its end. V2->v3 - updated comments to be more verbose. - removed task_lock() in numa_maps code. V1->V2 - access task->mempolicy only once and remember it. Becase kernel/exit.c can overwrite it. Signed-off-by: KAMEZAWA Hiroyuki Acked-by: David Rientjes Acked-by: KOSAKI Motohiro Signed-off-by: Linus Torvalds --- fs/proc/internal.h | 4 ++++ fs/proc/task_mmu.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 51 insertions(+), 3 deletions(-) diff --git a/fs/proc/internal.h b/fs/proc/internal.h index cceaab07ad5..43973b084ab 100644 --- a/fs/proc/internal.h +++ b/fs/proc/internal.h @@ -12,6 +12,7 @@ #include #include struct ctl_table_header; +struct mempolicy; extern struct proc_dir_entry proc_root; #ifdef CONFIG_PROC_SYSCTL @@ -74,6 +75,9 @@ struct proc_maps_private { #ifdef CONFIG_MMU struct vm_area_struct *tail_vma; #endif +#ifdef CONFIG_NUMA + struct mempolicy *task_mempolicy; +#endif }; void proc_init_inodecache(void); diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 14df8806ff2..90c63f9392a 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -90,10 +90,55 @@ static void pad_len_spaces(struct seq_file *m, int len) seq_printf(m, "%*c", len, ' '); } +#ifdef CONFIG_NUMA +/* + * These functions are for numa_maps but called in generic **maps seq_file + * ->start(), ->stop() ops. + * + * numa_maps scans all vmas under mmap_sem and checks their mempolicy. + * Each mempolicy object is controlled by reference counting. The problem here + * is how to avoid accessing dead mempolicy object. + * + * Because we're holding mmap_sem while reading seq_file, it's safe to access + * each vma's mempolicy, no vma objects will never drop refs to mempolicy. + * + * A task's mempolicy (task->mempolicy) has different behavior. task->mempolicy + * is set and replaced under mmap_sem but unrefed and cleared under task_lock(). + * So, without task_lock(), we cannot trust get_vma_policy() because we cannot + * gurantee the task never exits under us. But taking task_lock() around + * get_vma_plicy() causes lock order problem. + * + * To access task->mempolicy without lock, we hold a reference count of an + * object pointed by task->mempolicy and remember it. This will guarantee + * that task->mempolicy points to an alive object or NULL in numa_maps accesses. + */ +static void hold_task_mempolicy(struct proc_maps_private *priv) +{ + struct task_struct *task = priv->task; + + task_lock(task); + priv->task_mempolicy = task->mempolicy; + mpol_get(priv->task_mempolicy); + task_unlock(task); +} +static void release_task_mempolicy(struct proc_maps_private *priv) +{ + mpol_put(priv->task_mempolicy); +} +#else +static void hold_task_mempolicy(struct proc_maps_private *priv) +{ +} +static void release_task_mempolicy(struct proc_maps_private *priv) +{ +} +#endif + static void vma_stop(struct proc_maps_private *priv, struct vm_area_struct *vma) { if (vma && vma != priv->tail_vma) { struct mm_struct *mm = vma->vm_mm; + release_task_mempolicy(priv); up_read(&mm->mmap_sem); mmput(mm); } @@ -132,7 +177,7 @@ static void *m_start(struct seq_file *m, loff_t *pos) tail_vma = get_gate_vma(priv->task->mm); priv->tail_vma = tail_vma; - + hold_task_mempolicy(priv); /* Start with last addr hint */ vma = find_vma(mm, last_addr); if (last_addr && vma) { @@ -159,6 +204,7 @@ out: if (vma) return vma; + release_task_mempolicy(priv); /* End of vmas has been reached */ m->version = (tail_vma != NULL)? 0: -1UL; up_read(&mm->mmap_sem); @@ -1178,11 +1224,9 @@ static int show_numa_map(struct seq_file *m, void *v, int is_pid) walk.private = md; walk.mm = mm; - task_lock(task); pol = get_vma_policy(task, vma, vma->vm_start); mpol_to_str(buffer, sizeof(buffer), pol, 0); mpol_cond_put(pol); - task_unlock(task); seq_printf(m, "%08lx %s", vma->vm_start, buffer); -- cgit v1.2.3-70-g09d2 From b37d1bfb55d4b8a7d234fad0a84dca3336cee50b Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 19 Oct 2012 23:56:37 +0100 Subject: MODSIGN: perlify sign-file and merge in x509keyid Turn sign-file into perl and merge in x509keyid. The latter doesn't need to be a separate script as it doesn't actually need to work out the SHA1 sum of the X.509 certificate itself, since it can get that from the X.509 certificate. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- Makefile | 2 +- scripts/sign-file | 477 +++++++++++++++++++++++++++++++++++++++++++++--------- scripts/x509keyid | 268 ------------------------------ 3 files changed, 400 insertions(+), 347 deletions(-) mode change 100644 => 100755 scripts/sign-file delete mode 100755 scripts/x509keyid diff --git a/Makefile b/Makefile index 4fd82f7fc0b..14b987431d9 100644 --- a/Makefile +++ b/Makefile @@ -723,7 +723,7 @@ ifeq ($(CONFIG_MODULE_SIG),y) MODSECKEY = ./signing_key.priv MODPUBKEY = ./signing_key.x509 export MODPUBKEY -mod_sign_cmd = sh $(srctree)/scripts/sign-file $(MODSECKEY) $(MODPUBKEY) $(srctree)/scripts/x509keyid +mod_sign_cmd = perl $(srctree)/scripts/sign-file $(MODSECKEY) $(MODPUBKEY) else mod_sign_cmd = true endif diff --git a/scripts/sign-file b/scripts/sign-file old mode 100644 new mode 100755 index d014abd11f1..d37d1309531 --- a/scripts/sign-file +++ b/scripts/sign-file @@ -1,108 +1,429 @@ -#!/bin/bash +#!/usr/bin/perl -w # # Sign a module file using the given key. # -# Format: sign-file +# Format: # +# ./scripts/sign-file [-v] [] +# +# +use strict; +use FileHandle; +use IPC::Open2; + +my $verbose = 0; +if ($#ARGV >= 0 && $ARGV[0] eq "-v") { + $verbose = 1; + shift; +} + +die "Format: ./scripts/sign-file [-v] []\n" + if ($#ARGV != 2 && $#ARGV != 3); + +my $private_key = $ARGV[0]; +my $x509 = $ARGV[1]; +my $module = $ARGV[2]; +my $dest = ($#ARGV == 3) ? $ARGV[3] : $ARGV[2] . "~"; + +die "Can't read private key\n" unless (-r $private_key); +die "Can't read X.509 certificate\n" unless (-r $x509); +die "Can't read module\n" unless (-r $module); + +# +# Read the kernel configuration +# +my %config = ( + CONFIG_MODULE_SIG_SHA512 => 1 + ); + +if (-r ".config") { + open(FD, "<.config") || die ".config"; + while () { + if ($_ =~ /^(CONFIG_.*)=[ym]/) { + $config{$1} = 1; + } + } + close(FD); +} -scripts=`dirname $0` +# +# Function to read the contents of a file into a variable. +# +sub read_file($) +{ + my ($file) = @_; + my $contents; + my $len; + + open(FD, "<$file") || die $file; + binmode FD; + my @st = stat(FD); + die $file if (!@st); + $len = read(FD, $contents, $st[7]) || die $file; + close(FD) || die $file; + die "$file: Wanted length ", $st[7], ", got ", $len, "\n" + if ($len != $st[7]); + return $contents; +} + +############################################################################### +# +# First of all, we have to parse the X.509 certificate to find certain details +# about it. +# +# We read the DER-encoded X509 certificate and parse it to extract the Subject +# name and Subject Key Identifier. Theis provides the data we need to build +# the certificate identifier. +# +# The signer's name part of the identifier is fabricated from the commonName, +# the organizationName or the emailAddress components of the X.509 subject +# name. +# +# The subject key ID is used to select which of that signer's certificates +# we're intending to use to sign the module. +# +############################################################################### +my $x509_certificate = read_file($x509); -CONFIG_MODULE_SIG_SHA512=y -if [ -r .config ] -then - . ./.config -fi +my $UNIV = 0 << 6; +my $APPL = 1 << 6; +my $CONT = 2 << 6; +my $PRIV = 3 << 6; -key="$1" -x509="$2" -keyid_script="$3" -mod="$4" +my $CONS = 0x20; -if [ ! -r "$key" ] -then - echo "Can't read private key" >&2 - exit 2 -fi +my $BOOLEAN = 0x01; +my $INTEGER = 0x02; +my $BIT_STRING = 0x03; +my $OCTET_STRING = 0x04; +my $NULL = 0x05; +my $OBJ_ID = 0x06; +my $UTF8String = 0x0c; +my $SEQUENCE = 0x10; +my $SET = 0x11; +my $UTCTime = 0x17; +my $GeneralizedTime = 0x18; -if [ ! -r "$x509" ] -then - echo "Can't read X.509 certificate" >&2 - exit 2 -fi +my %OIDs = ( + pack("CCC", 85, 4, 3) => "commonName", + pack("CCC", 85, 4, 6) => "countryName", + pack("CCC", 85, 4, 10) => "organizationName", + pack("CCC", 85, 4, 11) => "organizationUnitName", + pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 1, 1) => "rsaEncryption", + pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 1, 5) => "sha1WithRSAEncryption", + pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 9, 1) => "emailAddress", + pack("CCC", 85, 29, 35) => "authorityKeyIdentifier", + pack("CCC", 85, 29, 14) => "subjectKeyIdentifier", + pack("CCC", 85, 29, 19) => "basicConstraints" +); + +############################################################################### +# +# Extract an ASN.1 element from a string and return information about it. +# +############################################################################### +sub asn1_extract($$@) +{ + my ($cursor, $expected_tag, $optional) = @_; + + return [ -1 ] + if ($cursor->[1] == 0 && $optional); + + die $x509, ": ", $cursor->[0], ": ASN.1 data underrun (elem ", $cursor->[1], ")\n" + if ($cursor->[1] < 2); + + my ($tag, $len) = unpack("CC", substr(${$cursor->[2]}, $cursor->[0], 2)); + + if ($expected_tag != -1 && $tag != $expected_tag) { + return [ -1 ] + if ($optional); + die $x509, ": ", $cursor->[0], ": ASN.1 unexpected tag (", $tag, + " not ", $expected_tag, ")\n"; + } + + $cursor->[0] += 2; + $cursor->[1] -= 2; + + die $x509, ": ", $cursor->[0], ": ASN.1 long tag\n" + if (($tag & 0x1f) == 0x1f); + die $x509, ": ", $cursor->[0], ": ASN.1 indefinite length\n" + if ($len == 0x80); + + if ($len > 0x80) { + my $l = $len - 0x80; + die $x509, ": ", $cursor->[0], ": ASN.1 data underrun (len len $l)\n" + if ($cursor->[1] < $l); + + if ($l == 0x1) { + $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1)); + } elsif ($l = 0x2) { + $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0], 2)); + } elsif ($l = 0x3) { + $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1)) << 16; + $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0] + 1, 2)); + } elsif ($l = 0x4) { + $len = unpack("N", substr(${$cursor->[2]}, $cursor->[0], 4)); + } else { + die $x509, ": ", $cursor->[0], ": ASN.1 element too long (", $l, ")\n"; + } + + $cursor->[0] += $l; + $cursor->[1] -= $l; + } + + die $x509, ": ", $cursor->[0], ": ASN.1 data underrun (", $len, ")\n" + if ($cursor->[1] < $len); + + my $ret = [ $tag, [ $cursor->[0], $len, $cursor->[2] ] ]; + $cursor->[0] += $len; + $cursor->[1] -= $len; + + return $ret; +} + +############################################################################### +# +# Retrieve the data referred to by a cursor +# +############################################################################### +sub asn1_retrieve($) +{ + my ($cursor) = @_; + my ($offset, $len, $data) = @$cursor; + return substr($$data, $offset, $len); +} + +############################################################################### +# +# Roughly parse the X.509 certificate +# +############################################################################### +my $cursor = [ 0, length($x509_certificate), \$x509_certificate ]; + +my $cert = asn1_extract($cursor, $UNIV | $CONS | $SEQUENCE); +my $tbs = asn1_extract($cert->[1], $UNIV | $CONS | $SEQUENCE); +my $version = asn1_extract($tbs->[1], $CONT | $CONS | 0, 1); +my $serial_number = asn1_extract($tbs->[1], $UNIV | $INTEGER); +my $sig_type = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); +my $issuer = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); +my $validity = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); +my $subject = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); +my $key = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); +my $issuer_uid = asn1_extract($tbs->[1], $CONT | $CONS | 1, 1); +my $subject_uid = asn1_extract($tbs->[1], $CONT | $CONS | 2, 1); +my $extension_list = asn1_extract($tbs->[1], $CONT | $CONS | 3, 1); + +my $subject_key_id = (); +my $authority_key_id = (); + +# +# Parse the extension list +# +if ($extension_list->[0] != -1) { + my $extensions = asn1_extract($extension_list->[1], $UNIV | $CONS | $SEQUENCE); + + while ($extensions->[1]->[1] > 0) { + my $ext = asn1_extract($extensions->[1], $UNIV | $CONS | $SEQUENCE); + my $x_oid = asn1_extract($ext->[1], $UNIV | $OBJ_ID); + my $x_crit = asn1_extract($ext->[1], $UNIV | $BOOLEAN, 1); + my $x_val = asn1_extract($ext->[1], $UNIV | $OCTET_STRING); + + my $raw_oid = asn1_retrieve($x_oid->[1]); + next if (!exists($OIDs{$raw_oid})); + my $x_type = $OIDs{$raw_oid}; + + my $raw_value = asn1_retrieve($x_val->[1]); + + if ($x_type eq "subjectKeyIdentifier") { + my $vcursor = [ 0, length($raw_value), \$raw_value ]; + + $subject_key_id = asn1_extract($vcursor, $UNIV | $OCTET_STRING); + } + } +} + +############################################################################### +# +# Determine what we're going to use as the signer's name. In order of +# preference, take one of: commonName, organizationName or emailAddress. +# +############################################################################### +my $org = ""; +my $cn = ""; +my $email = ""; + +while ($subject->[1]->[1] > 0) { + my $rdn = asn1_extract($subject->[1], $UNIV | $CONS | $SET); + my $attr = asn1_extract($rdn->[1], $UNIV | $CONS | $SEQUENCE); + my $n_oid = asn1_extract($attr->[1], $UNIV | $OBJ_ID); + my $n_val = asn1_extract($attr->[1], -1); + + my $raw_oid = asn1_retrieve($n_oid->[1]); + next if (!exists($OIDs{$raw_oid})); + my $n_type = $OIDs{$raw_oid}; + + my $raw_value = asn1_retrieve($n_val->[1]); + + if ($n_type eq "organizationName") { + $org = $raw_value; + } elsif ($n_type eq "commonName") { + $cn = $raw_value; + } elsif ($n_type eq "emailAddress") { + $email = $raw_value; + } +} + +my $signers_name = $email; + +if ($org && $cn) { + # Don't use the organizationName if the commonName repeats it + if (length($org) <= length($cn) && + substr($cn, 0, length($org)) eq $org) { + $signers_name = $cn; + goto got_id_name; + } + + # Or a signifcant chunk of it + if (length($org) >= 7 && + length($cn) >= 7 && + substr($cn, 0, 7) eq substr($org, 0, 7)) { + $signers_name = $cn; + goto got_id_name; + } + + $signers_name = $org . ": " . $cn; +} elsif ($org) { + $signers_name = $org; +} elsif ($cn) { + $signers_name = $cn; +} + +got_id_name: + +die $x509, ": ", "X.509: Couldn't find the Subject Key Identifier extension\n" + if (!$subject_key_id); + +my $key_identifier = asn1_retrieve($subject_key_id->[1]); + +############################################################################### +# +# Create and attach the module signature +# +############################################################################### # # Signature parameters # -algo=1 # Public-key crypto algorithm: RSA -hash= # Digest algorithm -id_type=1 # Identifier type: X.509 +my $algo = 1; # Public-key crypto algorithm: RSA +my $hash = 0; # Digest algorithm +my $id_type = 1; # Identifier type: X.509 # # Digest the data # -dgst= -if [ "$CONFIG_MODULE_SIG_SHA1" = "y" ] -then - prologue="0x30, 0x21, 0x30, 0x09, 0x06, 0x05, 0x2B, 0x0E, 0x03, 0x02, 0x1A, 0x05, 0x00, 0x04, 0x14" - dgst=-sha1 - hash=2 -elif [ "$CONFIG_MODULE_SIG_SHA224" = "y" ] -then - prologue="0x30, 0x2d, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x04, 0x05, 0x00, 0x04, 0x1C" - dgst=-sha224 - hash=7 -elif [ "$CONFIG_MODULE_SIG_SHA256" = "y" ] -then - prologue="0x30, 0x31, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x05, 0x00, 0x04, 0x20" - dgst=-sha256 - hash=4 -elif [ "$CONFIG_MODULE_SIG_SHA384" = "y" ] -then - prologue="0x30, 0x41, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x02, 0x05, 0x00, 0x04, 0x30" - dgst=-sha384 - hash=5 -elif [ "$CONFIG_MODULE_SIG_SHA512" = "y" ] -then - prologue="0x30, 0x51, 0x30, 0x0d, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x03, 0x05, 0x00, 0x04, 0x40" - dgst=-sha512 - hash=6 -else - echo "$0: Can't determine hash algorithm" >&2 - exit 2 -fi - -( -perl -e "binmode STDOUT; print pack(\"C*\", $prologue)" || exit $? -openssl dgst $dgst -binary $mod || exit $? -) >$mod.dig || exit $? +my ($dgst, $prologue) = (); +if (exists $config{"CONFIG_MODULE_SIG_SHA1"}) { + $prologue = pack("C*", + 0x30, 0x21, 0x30, 0x09, 0x06, 0x05, + 0x2B, 0x0E, 0x03, 0x02, 0x1A, + 0x05, 0x00, 0x04, 0x14); + $dgst = "-sha1"; + $hash = 2; +} elsif (exists $config{"CONFIG_MODULE_SIG_SHA224"}) { + $prologue = pack("C*", + 0x30, 0x2d, 0x30, 0x0d, 0x06, 0x09, + 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x04, + 0x05, 0x00, 0x04, 0x1C); + $dgst = "-sha224"; + $hash = 7; +} elsif (exists $config{"CONFIG_MODULE_SIG_SHA256"}) { + $prologue = pack("C*", + 0x30, 0x31, 0x30, 0x0d, 0x06, 0x09, + 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, + 0x05, 0x00, 0x04, 0x20); + $dgst = "-sha256"; + $hash = 4; +} elsif (exists $config{"CONFIG_MODULE_SIG_SHA384"}) { + $prologue = pack("C*", + 0x30, 0x41, 0x30, 0x0d, 0x06, 0x09, + 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x02, + 0x05, 0x00, 0x04, 0x30); + $dgst = "-sha384"; + $hash = 5; +} elsif (exists $config{"CONFIG_MODULE_SIG_SHA512"}) { + $prologue = pack("C*", + 0x30, 0x51, 0x30, 0x0d, 0x06, 0x09, + 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x03, + 0x05, 0x00, 0x04, 0x40); + $dgst = "-sha512"; + $hash = 6; +} else { + die "Can't determine hash algorithm"; +} + +# +# Generate the digest and read from openssl's stdout +# +my $digest; +$digest = readpipe("openssl dgst $dgst -binary $module") || die "openssl dgst"; # # Generate the binary signature, which will be just the integer that comprises # the signature with no metadata attached. # -openssl rsautl -sign -inkey $key -keyform PEM -in $mod.dig -out $mod.sig || exit $? -siglen=`stat -c %s $mod.sig` +my $pid; +$pid = open2(*read_from, *write_to, + "openssl rsautl -sign -inkey $private_key -keyform PEM") || + die "openssl rsautl"; +binmode write_to; +print write_to $prologue . $digest || die "pipe to openssl rsautl"; +close(write_to) || die "pipe to openssl rsautl"; + +binmode read_from; +my $signature; +read(read_from, $signature, 4096) || die "pipe from openssl rsautl"; +close(read_from) || die "pipe from openssl rsautl"; +$signature = pack("n", length($signature)) . $signature, -SIGNER="`perl $keyid_script $x509 signer-name`" -KEYID="`perl $keyid_script $x509 keyid`" -keyidlen=$(echo -n "$KEYID" | wc -c) -signerlen=$(echo -n "$SIGNER" | wc -c) +waitpid($pid, 0) || die; +die "openssl rsautl died: $?" if ($? >> 8); # # Build the signed binary # -( - cat $mod || exit $? - echo '~Module signature appended~' || exit $? - echo -n "$SIGNER" || exit $? - echo -n "$KEYID" || exit $? +my $unsigned_module = read_file($module); + +my $magic_number = "~Module signature appended~\n"; + +my $info = pack("CCCCCxxxN", + $algo, $hash, $id_type, + length($signers_name), + length($key_identifier), + length($signature)); - # Preface each signature integer with a 2-byte BE length - perl -e "binmode STDOUT; print pack(\"n\", $siglen)" || exit $? - cat $mod.sig || exit $? +if ($verbose) { + print "Size of unsigned module: ", length($unsigned_module), "\n"; + print "Size of magic number : ", length($magic_number), "\n"; + print "Size of signer's name : ", length($signers_name), "\n"; + print "Size of key identifier : ", length($key_identifier), "\n"; + print "Size of signature : ", length($signature), "\n"; + print "Size of informaton : ", length($info), "\n"; + print "Signer's name : '", $signers_name, "'\n"; + print "Digest : $dgst\n"; +} - # Generate the information block - perl -e "binmode STDOUT; print pack(\"CCCCCxxxN\", $algo, $hash, $id_type, $signerlen, $keyidlen, $siglen + 2)" || exit $? -) >$mod~ || exit $? +open(FD, ">$dest") || die $dest; +binmode FD; +print FD + $unsigned_module, + $magic_number, + $signers_name, + $key_identifier, + $signature, + $info + ; +close FD || die $dest; -mv $mod~ $mod || exit $? +if ($#ARGV != 3) { + rename($dest, $module) || die $module; +} diff --git a/scripts/x509keyid b/scripts/x509keyid deleted file mode 100755 index 4241ec6c64b..00000000000 --- a/scripts/x509keyid +++ /dev/null @@ -1,268 +0,0 @@ -#!/usr/bin/perl -w -# -# Generate an identifier from an X.509 certificate that can be placed in a -# module signature to indentify the key to use. -# -# Format: -# -# ./scripts/x509keyid -# -# We read the DER-encoded X509 certificate and parse it to extract the Subject -# name and Subject Key Identifier. The provide the data we need to build the -# certificate identifier. -# -# The signer's name part of the identifier is fabricated from the commonName, -# the organizationName or the emailAddress components of the X.509 subject -# name and written to the second named file. -# -# The subject key ID to select which of that signer's certificates we're -# intending to use to sign the module is written to the third named file. -# -use strict; - -my $raw_data; - -die "Need a filename [keyid|signer-name]\n" if ($#ARGV != 1); - -my $src = $ARGV[0]; - -open(FD, "<$src") || die $src; -binmode FD; -my @st = stat(FD); -die $src if (!@st); -read(FD, $raw_data, $st[7]) || die $src; -close(FD); - -my $UNIV = 0 << 6; -my $APPL = 1 << 6; -my $CONT = 2 << 6; -my $PRIV = 3 << 6; - -my $CONS = 0x20; - -my $BOOLEAN = 0x01; -my $INTEGER = 0x02; -my $BIT_STRING = 0x03; -my $OCTET_STRING = 0x04; -my $NULL = 0x05; -my $OBJ_ID = 0x06; -my $UTF8String = 0x0c; -my $SEQUENCE = 0x10; -my $SET = 0x11; -my $UTCTime = 0x17; -my $GeneralizedTime = 0x18; - -my %OIDs = ( - pack("CCC", 85, 4, 3) => "commonName", - pack("CCC", 85, 4, 6) => "countryName", - pack("CCC", 85, 4, 10) => "organizationName", - pack("CCC", 85, 4, 11) => "organizationUnitName", - pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 1, 1) => "rsaEncryption", - pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 1, 5) => "sha1WithRSAEncryption", - pack("CCCCCCCCC", 42, 134, 72, 134, 247, 13, 1, 9, 1) => "emailAddress", - pack("CCC", 85, 29, 35) => "authorityKeyIdentifier", - pack("CCC", 85, 29, 14) => "subjectKeyIdentifier", - pack("CCC", 85, 29, 19) => "basicConstraints" -); - -############################################################################### -# -# Extract an ASN.1 element from a string and return information about it. -# -############################################################################### -sub asn1_extract($$@) -{ - my ($cursor, $expected_tag, $optional) = @_; - - return [ -1 ] - if ($cursor->[1] == 0 && $optional); - - die $src, ": ", $cursor->[0], ": ASN.1 data underrun (elem ", $cursor->[1], ")\n" - if ($cursor->[1] < 2); - - my ($tag, $len) = unpack("CC", substr(${$cursor->[2]}, $cursor->[0], 2)); - - if ($expected_tag != -1 && $tag != $expected_tag) { - return [ -1 ] - if ($optional); - die $src, ": ", $cursor->[0], ": ASN.1 unexpected tag (", $tag, - " not ", $expected_tag, ")\n"; - } - - $cursor->[0] += 2; - $cursor->[1] -= 2; - - die $src, ": ", $cursor->[0], ": ASN.1 long tag\n" - if (($tag & 0x1f) == 0x1f); - die $src, ": ", $cursor->[0], ": ASN.1 indefinite length\n" - if ($len == 0x80); - - if ($len > 0x80) { - my $l = $len - 0x80; - die $src, ": ", $cursor->[0], ": ASN.1 data underrun (len len $l)\n" - if ($cursor->[1] < $l); - - if ($l == 0x1) { - $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1)); - } elsif ($l = 0x2) { - $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0], 2)); - } elsif ($l = 0x3) { - $len = unpack("C", substr(${$cursor->[2]}, $cursor->[0], 1)) << 16; - $len = unpack("n", substr(${$cursor->[2]}, $cursor->[0] + 1, 2)); - } elsif ($l = 0x4) { - $len = unpack("N", substr(${$cursor->[2]}, $cursor->[0], 4)); - } else { - die $src, ": ", $cursor->[0], ": ASN.1 element too long (", $l, ")\n"; - } - - $cursor->[0] += $l; - $cursor->[1] -= $l; - } - - die $src, ": ", $cursor->[0], ": ASN.1 data underrun (", $len, ")\n" - if ($cursor->[1] < $len); - - my $ret = [ $tag, [ $cursor->[0], $len, $cursor->[2] ] ]; - $cursor->[0] += $len; - $cursor->[1] -= $len; - - return $ret; -} - -############################################################################### -# -# Retrieve the data referred to by a cursor -# -############################################################################### -sub asn1_retrieve($) -{ - my ($cursor) = @_; - my ($offset, $len, $data) = @$cursor; - return substr($$data, $offset, $len); -} - -############################################################################### -# -# Roughly parse the X.509 certificate -# -############################################################################### -my $cursor = [ 0, length($raw_data), \$raw_data ]; - -my $cert = asn1_extract($cursor, $UNIV | $CONS | $SEQUENCE); -my $tbs = asn1_extract($cert->[1], $UNIV | $CONS | $SEQUENCE); -my $version = asn1_extract($tbs->[1], $CONT | $CONS | 0, 1); -my $serial_number = asn1_extract($tbs->[1], $UNIV | $INTEGER); -my $sig_type = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); -my $issuer = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); -my $validity = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); -my $subject = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); -my $key = asn1_extract($tbs->[1], $UNIV | $CONS | $SEQUENCE); -my $issuer_uid = asn1_extract($tbs->[1], $CONT | $CONS | 1, 1); -my $subject_uid = asn1_extract($tbs->[1], $CONT | $CONS | 2, 1); -my $extension_list = asn1_extract($tbs->[1], $CONT | $CONS | 3, 1); - -my $subject_key_id = (); -my $authority_key_id = (); - -# -# Parse the extension list -# -if ($extension_list->[0] != -1) { - my $extensions = asn1_extract($extension_list->[1], $UNIV | $CONS | $SEQUENCE); - - while ($extensions->[1]->[1] > 0) { - my $ext = asn1_extract($extensions->[1], $UNIV | $CONS | $SEQUENCE); - my $x_oid = asn1_extract($ext->[1], $UNIV | $OBJ_ID); - my $x_crit = asn1_extract($ext->[1], $UNIV | $BOOLEAN, 1); - my $x_val = asn1_extract($ext->[1], $UNIV | $OCTET_STRING); - - my $raw_oid = asn1_retrieve($x_oid->[1]); - next if (!exists($OIDs{$raw_oid})); - my $x_type = $OIDs{$raw_oid}; - - my $raw_value = asn1_retrieve($x_val->[1]); - - if ($x_type eq "subjectKeyIdentifier") { - my $vcursor = [ 0, length($raw_value), \$raw_value ]; - - $subject_key_id = asn1_extract($vcursor, $UNIV | $OCTET_STRING); - } - } -} - -############################################################################### -# -# Determine what we're going to use as the signer's name. In order of -# preference, take one of: commonName, organizationName or emailAddress. -# -############################################################################### -my $org = ""; -my $cn = ""; -my $email = ""; - -while ($subject->[1]->[1] > 0) { - my $rdn = asn1_extract($subject->[1], $UNIV | $CONS | $SET); - my $attr = asn1_extract($rdn->[1], $UNIV | $CONS | $SEQUENCE); - my $n_oid = asn1_extract($attr->[1], $UNIV | $OBJ_ID); - my $n_val = asn1_extract($attr->[1], -1); - - my $raw_oid = asn1_retrieve($n_oid->[1]); - next if (!exists($OIDs{$raw_oid})); - my $n_type = $OIDs{$raw_oid}; - - my $raw_value = asn1_retrieve($n_val->[1]); - - if ($n_type eq "organizationName") { - $org = $raw_value; - } elsif ($n_type eq "commonName") { - $cn = $raw_value; - } elsif ($n_type eq "emailAddress") { - $email = $raw_value; - } -} - -my $id_name = $email; - -if ($org && $cn) { - # Don't use the organizationName if the commonName repeats it - if (length($org) <= length($cn) && - substr($cn, 0, length($org)) eq $org) { - $id_name = $cn; - goto got_id_name; - } - - # Or a signifcant chunk of it - if (length($org) >= 7 && - length($cn) >= 7 && - substr($cn, 0, 7) eq substr($org, 0, 7)) { - $id_name = $cn; - goto got_id_name; - } - - $id_name = $org . ": " . $cn; -} elsif ($org) { - $id_name = $org; -} elsif ($cn) { - $id_name = $cn; -} - -got_id_name: - -############################################################################### -# -# Output the signer's name and the key identifier that we're going to include -# in module signatures. -# -############################################################################### -die $src, ": ", "X.509: Couldn't find the Subject Key Identifier extension\n" - if (!$subject_key_id); - -my $id_key_id = asn1_retrieve($subject_key_id->[1]); - -if ($ARGV[1] eq "signer-name") { - print $id_name; -} elsif ($ARGV[1] eq "keyid") { - print $id_key_id; -} else { - die "Unknown arg"; -} -- cgit v1.2.3-70-g09d2 From b6bb324dbddd704b4b9a85971e1f7ae79abb2e1d Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 19 Oct 2012 23:56:45 +0100 Subject: MODSIGN: Cleanup .gitignore The module build process no longer creates intermediate files for module signing, so remove them from .gitignore. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- .gitignore | 6 ------ 1 file changed, 6 deletions(-) diff --git a/.gitignore b/.gitignore index 0f2f40f7191..92bd0e45dfa 100644 --- a/.gitignore +++ b/.gitignore @@ -14,10 +14,6 @@ *.o.* *.a *.s -*.ko.unsigned -*.ko.stripped -*.ko.stripped.dig -*.ko.stripped.sig *.ko *.so *.so.dbg @@ -95,6 +91,4 @@ GTAGS extra_certificates signing_key.priv signing_key.x509 -signing_key.x509.keyid -signing_key.x509.signer x509.genkey -- cgit v1.2.3-70-g09d2 From caabe240574aec05b2f5667414ce80f9075c2ba1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Sat, 20 Oct 2012 01:19:29 +0100 Subject: MODSIGN: Move the magic string to the end of a module and eliminate the search Emit the magic string that indicates a module has a signature after the signature data instead of before it. This allows module_sig_check() to be made simpler and faster by the elimination of the search for the magic string. Instead we just need to do a single memcmp(). This works because at the end of the signature data there is the fixed-length signature information block. This block then falls immediately prior to the magic number. From the contents of the information block, it is trivial to calculate the size of the signature data and thus the size of the actual module data. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- kernel/module-internal.h | 3 +-- kernel/module.c | 26 +++++++++----------------- kernel/module_signing.c | 24 +++++++++++++++--------- scripts/sign-file | 6 +++--- 4 files changed, 28 insertions(+), 31 deletions(-) diff --git a/kernel/module-internal.h b/kernel/module-internal.h index 6114a13419b..24f9247b7d0 100644 --- a/kernel/module-internal.h +++ b/kernel/module-internal.h @@ -11,5 +11,4 @@ extern struct key *modsign_keyring; -extern int mod_verify_sig(const void *mod, unsigned long modlen, - const void *sig, unsigned long siglen); +extern int mod_verify_sig(const void *mod, unsigned long *_modlen); diff --git a/kernel/module.c b/kernel/module.c index 0e2da8695f8..6085f5ef88e 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -2421,25 +2421,17 @@ static inline void kmemleak_load_module(const struct module *mod, #ifdef CONFIG_MODULE_SIG static int module_sig_check(struct load_info *info, - const void *mod, unsigned long *len) + const void *mod, unsigned long *_len) { int err = -ENOKEY; - const unsigned long markerlen = sizeof(MODULE_SIG_STRING) - 1; - const void *p = mod, *end = mod + *len; - - /* Poor man's memmem. */ - while ((p = memchr(p, MODULE_SIG_STRING[0], end - p))) { - if (p + markerlen > end) - break; - - if (memcmp(p, MODULE_SIG_STRING, markerlen) == 0) { - const void *sig = p + markerlen; - /* Truncate module up to signature. */ - *len = p - mod; - err = mod_verify_sig(mod, *len, sig, end - sig); - break; - } - p++; + unsigned long markerlen = sizeof(MODULE_SIG_STRING) - 1; + unsigned long len = *_len; + + if (len > markerlen && + memcmp(mod + len - markerlen, MODULE_SIG_STRING, markerlen) == 0) { + /* We truncate the module to discard the signature */ + *_len -= markerlen; + err = mod_verify_sig(mod, _len); } if (!err) { diff --git a/kernel/module_signing.c b/kernel/module_signing.c index 6b09f6983ac..d492a23df99 100644 --- a/kernel/module_signing.c +++ b/kernel/module_signing.c @@ -183,27 +183,33 @@ static struct key *request_asymmetric_key(const char *signer, size_t signer_len, /* * Verify the signature on a module. */ -int mod_verify_sig(const void *mod, unsigned long modlen, - const void *sig, unsigned long siglen) +int mod_verify_sig(const void *mod, unsigned long *_modlen) { struct public_key_signature *pks; struct module_signature ms; struct key *key; - size_t sig_len; + const void *sig; + size_t modlen = *_modlen, sig_len; int ret; - pr_devel("==>%s(,%lu,,%lu,)\n", __func__, modlen, siglen); + pr_devel("==>%s(,%lu)\n", __func__, modlen); - if (siglen <= sizeof(ms)) + if (modlen <= sizeof(ms)) return -EBADMSG; - memcpy(&ms, sig + (siglen - sizeof(ms)), sizeof(ms)); - siglen -= sizeof(ms); + memcpy(&ms, mod + (modlen - sizeof(ms)), sizeof(ms)); + modlen -= sizeof(ms); sig_len = be32_to_cpu(ms.sig_len); - if (sig_len >= siglen || - siglen - sig_len != (size_t)ms.signer_len + ms.key_id_len) + if (sig_len >= modlen) return -EBADMSG; + modlen -= sig_len; + if ((size_t)ms.signer_len + ms.key_id_len >= modlen) + return -EBADMSG; + modlen -= (size_t)ms.signer_len + ms.key_id_len; + + *_modlen = modlen; + sig = mod + modlen; /* For the moment, only support RSA and X.509 identifiers */ if (ms.algo != PKEY_ALGO_RSA || diff --git a/scripts/sign-file b/scripts/sign-file index d37d1309531..87ca59d36e7 100755 --- a/scripts/sign-file +++ b/scripts/sign-file @@ -403,11 +403,11 @@ my $info = pack("CCCCCxxxN", if ($verbose) { print "Size of unsigned module: ", length($unsigned_module), "\n"; - print "Size of magic number : ", length($magic_number), "\n"; print "Size of signer's name : ", length($signers_name), "\n"; print "Size of key identifier : ", length($key_identifier), "\n"; print "Size of signature : ", length($signature), "\n"; print "Size of informaton : ", length($info), "\n"; + print "Size of magic number : ", length($magic_number), "\n"; print "Signer's name : '", $signers_name, "'\n"; print "Digest : $dgst\n"; } @@ -416,11 +416,11 @@ open(FD, ">$dest") || die $dest; binmode FD; print FD $unsigned_module, - $magic_number, $signers_name, $key_identifier, $signature, - $info + $info, + $magic_number ; close FD || die $dest; -- cgit v1.2.3-70-g09d2 From 45bff41a9a6f22af28e4ba22f83c87f619e573a8 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Thu, 18 Oct 2012 11:38:35 -0300 Subject: perf python: Properly link with libtraceevent Namhyung Kim reported that the build fails with: GEN python/perf.so gcc: error: python_ext_build/tmp//../../libtraceevent.a: No such file or directory error: command 'gcc' failed with exit status 1 cp: cannot stat `python_ext_build/lib/perf.so': No such file or directory make: *** [python/perf.so] Error 1 We need to propagate the TE_PATH variable to the setup.py file. Reported-by: Namhyung Kim Signed-off-by: Arnaldo Carvalho de Melo Link: http://lkml.kernel.org/n/tip-8umiPbm4sxpknKivbjgykhut@git.kernel.org [ Fixed superfluous variable build error. ] Signed-off-by: Ingo Molnar --- tools/perf/Makefile | 24 +++++++++++++----------- tools/perf/util/python.c | 2 -- tools/perf/util/setup.py | 3 ++- 3 files changed, 15 insertions(+), 14 deletions(-) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index f7c968ad517..00deed4d615 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -184,9 +184,22 @@ SCRIPT_SH += perf-archive.sh grep-libs = $(filter -l%,$(1)) strip-libs = $(filter-out -l%,$(1)) +TRACE_EVENT_DIR = ../lib/traceevent/ + +ifneq ($(OUTPUT),) + TE_PATH=$(OUTPUT) +else + TE_PATH=$(TRACE_EVENT_DIR) +endif + +LIBTRACEEVENT = $(TE_PATH)libtraceevent.a +TE_LIB := -L$(TE_PATH) -ltraceevent + PYTHON_EXT_SRCS := $(shell grep -v ^\# util/python-ext-sources) PYTHON_EXT_DEPS := util/python-ext-sources util/setup.py +export LIBTRACEEVENT + $(OUTPUT)python/perf.so: $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS) $(QUIET_GEN)CFLAGS='$(BASIC_CFLAGS)' $(PYTHON_WORD) util/setup.py \ --quiet build_ext; \ @@ -198,17 +211,6 @@ $(OUTPUT)python/perf.so: $(PYTHON_EXT_SRCS) $(PYTHON_EXT_DEPS) SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH)) -TRACE_EVENT_DIR = ../lib/traceevent/ - -ifneq ($(OUTPUT),) - TE_PATH=$(OUTPUT) -else - TE_PATH=$(TRACE_EVENT_DIR) -endif - -LIBTRACEEVENT = $(TE_PATH)libtraceevent.a -TE_LIB := -L$(TE_PATH) -ltraceevent - # # Single 'perf' binary right now: # diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c index a2657fd9683..9181bf212fb 100644 --- a/tools/perf/util/python.c +++ b/tools/perf/util/python.c @@ -1015,8 +1015,6 @@ PyMODINIT_FUNC initperf(void) pyrf_cpu_map__setup_types() < 0) return; - page_size = sysconf(_SC_PAGE_SIZE); - Py_INCREF(&pyrf_evlist__type); PyModule_AddObject(module, "evlist", (PyObject*)&pyrf_evlist__type); diff --git a/tools/perf/util/setup.py b/tools/perf/util/setup.py index 09c3cea95d3..73d51026978 100644 --- a/tools/perf/util/setup.py +++ b/tools/perf/util/setup.py @@ -23,6 +23,7 @@ cflags += getenv('CFLAGS', '').split() build_lib = getenv('PYTHON_EXTBUILD_LIB') build_tmp = getenv('PYTHON_EXTBUILD_TMP') +libtraceevent = getenv('LIBTRACEEVENT') ext_sources = [f.strip() for f in file('util/python-ext-sources') if len(f.strip()) > 0 and f[0] != '#'] @@ -31,7 +32,7 @@ perf = Extension('perf', sources = ext_sources, include_dirs = ['util/include'], extra_compile_args = cflags, - extra_objects = [build_tmp + '/../../libtraceevent.a'], + extra_objects = [libtraceevent], ) setup(name='perf', -- cgit v1.2.3-70-g09d2 From 31fd84b95eb211d5db460a1dda85e004800a7b52 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 19 Oct 2012 18:45:53 -0700 Subject: use clamp_t in UNAME26 fix The min/max call needed to have explicit types on some architectures (e.g. mn10300). Use clamp_t instead to avoid the warning: kernel/sys.c: In function 'override_release': kernel/sys.c:1287:10: warning: comparison of distinct pointer types lacks a cast [enabled by default] Reported-by: Fengguang Wu Signed-off-by: Kees Cook Signed-off-by: Linus Torvalds --- kernel/sys.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sys.c b/kernel/sys.c index 01865c6fb6a..e6e0ece5f6a 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -1284,7 +1284,7 @@ static int override_release(char __user *release, size_t len) rest++; } v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 40; - copy = min(sizeof(buf), max_t(size_t, 1, len)); + copy = clamp_t(size_t, len, 1, sizeof(buf)); copy = scnprintf(buf, copy, "2.6.%u%s", v, rest); ret = copy_to_user(release, buf, copy + 1); } -- cgit v1.2.3-70-g09d2 From aeed41a9371ee02257b608eb06a9058507a7d0f4 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 19 Oct 2012 17:33:27 +0100 Subject: arm64: fix alignment padding in assembly code An interesting effect of using the generic version of linkage.h is that the padding is defined in terms of x86 NOPs, which can have even more interesting effects when the assembly code looks like this: ENTRY(func1) mov x0, xzr ENDPROC(func1) // fall through ENTRY(func2) mov x0, #1 ret ENDPROC(func2) Admittedly, the code is not very nice. But having code from another architecture doesn't look completely sane either. The fix is to add arm64's version of linkage.h, which causes the insertion of proper AArch64 NOPs. Signed-off-by: Marc Zyngier Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/Kbuild | 1 - arch/arm64/include/asm/linkage.h | 7 +++++++ 2 files changed, 7 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/include/asm/linkage.h diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild index fe77e51a784..a581a220593 100644 --- a/arch/arm64/include/asm/Kbuild +++ b/arch/arm64/include/asm/Kbuild @@ -18,7 +18,6 @@ generic-y += ipcbuf.h generic-y += irq_regs.h generic-y += kdebug.h generic-y += kmap_types.h -generic-y += linkage.h generic-y += local.h generic-y += local64.h generic-y += mman.h diff --git a/arch/arm64/include/asm/linkage.h b/arch/arm64/include/asm/linkage.h new file mode 100644 index 00000000000..636c1bced7d --- /dev/null +++ b/arch/arm64/include/asm/linkage.h @@ -0,0 +1,7 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define __ALIGN .align 4 +#define __ALIGN_STR ".align 4" + +#endif -- cgit v1.2.3-70-g09d2 From 6f0c0580b70c89094b3422ba81118c7b959c7556 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 20 Oct 2012 12:11:32 -0700 Subject: Linux 3.7-rc2 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 14b987431d9..14c93b39b92 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Terrified Chipmunk # *DOCUMENTATION* -- cgit v1.2.3-70-g09d2 From 11930c530f3edf81160e4962e363d579f5cdce7e Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Fri, 14 Sep 2012 17:01:29 +0800 Subject: ARM: at91/tc: fix typo in the DT document Signed-off-by: Josh Wu Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Cc: stable [v3.4] --- Documentation/devicetree/bindings/arm/atmel-at91.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index ecc81e36871..d187e9f7cf1 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -8,7 +8,7 @@ PIT Timer required properties: shared across all System Controller members. TC/TCLIB Timer required properties: -- compatible: Should be "atmel,-pit". +- compatible: Should be "atmel,-tcb". can be "at91rm9200" or "at91sam9x5" - reg: Should contain registers location and length - interrupts: Should contain all interrupts for the TC block -- cgit v1.2.3-70-g09d2 From 3d9a0183dd3423353e9e363bcc261c1220d05f9f Mon Sep 17 00:00:00 2001 From: Ivan Shugov Date: Wed, 24 Oct 2012 11:02:44 +0200 Subject: ARM: at91: at91sam9g10: fix SOC type detection Newer at91sam9g10 SoC revision can't be detected, so the kernel can't boot with this kind of kernel panic: "AT91: Impossible to detect the SOC type" CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 CPU: VIVT data cache, VIVT instruction cache Machine: Atmel AT91SAM9G10-EK Ignoring tag cmdline (using the default kernel command line) bootconsole [earlycon0] enabled Memory policy: ECC disabled, Data cache writeback Kernel panic - not syncing: AT91: Impossible to detect the SOC type [] (unwind_backtrace+0x0/0xe0) from [] (panic+0x78/0x1cc) [] (panic+0x78/0x1cc) from [] (at91_map_io+0x90/0xc8) [] (at91_map_io+0x90/0xc8) from [] (paging_init+0x564/0x6d0) [] (paging_init+0x564/0x6d0) from [] (setup_arch+0x464/0x704) [] (setup_arch+0x464/0x704) from [] (start_kernel+0x6c/0x2d4) [] (start_kernel+0x6c/0x2d4) from [<20008040>] (0x20008040) The reason for this is that the Debug Unit Chip ID Register has changed between Engineering Sample and definitive revision of the SoC. Changing the check of cidr to socid will address the problem. We do not integrate this check to the list just above because we also have to make sure that the extended id is disregarded. Signed-off-by: Ivan Shugov [nicolas.ferre@atmel.com: change commit message] Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Cc: stable [v3.1] # since commit 8c3583b6 --- arch/arm/mach-at91/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index da9881b161e..6a3d4bb6d2e 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -151,7 +151,7 @@ static void __init soc_detect(u32 dbgu_base) } /* at91sam9g10 */ - if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { + if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { at91_soc_initdata.type = AT91_SOC_SAM9G10; at91_boot_soc = at91sam9261_soc; } -- cgit v1.2.3-70-g09d2 From 738a0fd752dc60e20beeda6f2f0f62e58dc0e344 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 24 Oct 2012 16:09:57 +0200 Subject: ARM: at91: fix external interrupts in non-DT case Management of external interrupts has changed but the non-DT code has not integrated these changes. Add a mask to pass external irq specification from SoC specific code to the at91_aic_init() function. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Ludovic Desroches Cc: stable [v3.6] --- arch/arm/mach-at91/generic.h | 3 ++- arch/arm/mach-at91/irq.c | 9 +++++++-- arch/arm/mach-at91/setup.c | 2 +- 3 files changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index f4965067765..b62f560e6c7 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -26,7 +26,8 @@ extern void __init at91_dt_initialize(void); extern void __init at91_init_irq_default(void); extern void __init at91_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); -extern void __init at91_aic_init(unsigned int priority[]); +extern void __init at91_aic_init(unsigned int priority[], + unsigned int ext_irq_mask); extern int __init at91_aic_of_init(struct device_node *node, struct device_node *parent); extern int __init at91_aic5_of_init(struct device_node *node, diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 1e02c0e49dc..febc2ee901a 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -502,14 +502,19 @@ int __init at91_aic5_of_init(struct device_node *node, /* * Initialize the AIC interrupt controller. */ -void __init at91_aic_init(unsigned int *priority) +void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask) { unsigned int i; int irq_base; - if (at91_aic_pm_init()) + at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) + * sizeof(*at91_extern_irq), GFP_KERNEL); + + if (at91_aic_pm_init() || at91_extern_irq == NULL) panic("Unable to allocate bit maps\n"); + *at91_extern_irq = ext_irq_mask; + at91_aic_base = ioremap(AT91_AIC, 512); if (!at91_aic_base) panic("Unable to ioremap AIC registers\n"); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 6a3d4bb6d2e..0b32c81730a 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -47,7 +47,7 @@ void __init at91_init_irq_default(void) void __init at91_init_interrupts(unsigned int *priority) { /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); + at91_aic_init(priority, at91_extern_irq); /* Enable GPIO interrupts */ at91_gpio_irq_setup(); -- cgit v1.2.3-70-g09d2 From 69e7ea04c9365626c0963ff09bbaa3a1b49e293a Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 24 Oct 2012 16:19:47 +0200 Subject: ARM: at91: fix external interrupt specification in board code Since the switch to sparse irq, we have to add the NR_IRQS_LEGACY offset to static irq numbers. It has been forgotten on these SPI irq definitions in board code. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Ludovic Desroches Cc: stable [v3.6] --- arch/arm/mach-at91/board-neocore926.c | 2 +- arch/arm/mach-at91/board-sam9261ek.c | 2 +- arch/arm/mach-at91/board-sam9263ek.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 9cda3fd346a..6960778af4c 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -129,7 +129,7 @@ static struct spi_board_info neocore926_spi_devices[] = { .max_speed_hz = 125000 * 16, .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9263_ID_IRQ1, + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, }, #endif }; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 27b3af1a304..a9167dd45f9 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -309,7 +309,7 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9261_ID_IRQ0, + .irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0, .controller_data = (void *) AT91_PIN_PA28, /* CS pin */ }, #endif diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 073e17403d9..b87dbe2be0d 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -132,7 +132,7 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9263_ID_IRQ1, + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, }, #endif }; -- cgit v1.2.3-70-g09d2 From b6edfbeacd5804038ea7ea8821a83ad704c107cc Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Mon, 1 Oct 2012 22:46:09 +0200 Subject: ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels. Signed-off-by: Marek Belisko Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD --- arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index b06c0db273b..e6391a4e664 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -126,14 +126,14 @@ #size-cells = <0>; btn3 { - label = "Buttin 3"; + label = "Button 3"; gpios = <&pioA 30 1>; linux,code = <0x103>; gpio-key,wakeup; }; btn4 { - label = "Buttin 4"; + label = "Button 4"; gpios = <&pioA 31 1>; linux,code = <0x104>; gpio-key,wakeup; -- cgit v1.2.3-70-g09d2 From 7840487cd6298f9f931103b558290d8d98d41c49 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Mon, 15 Oct 2012 17:30:27 +0800 Subject: ARM: at91/i2c: change id to let i2c-gpio work The i2c core driver will turn the platform device ID to busnum When using platfrom device ID as -1, it means dynamically assigned the busnum. When writing code, we need to make sure the busnum, and call i2c_register_board_info(int busnum, ...) to register device if using -1, we do not know the value of busnum In order to solve this issue, set the platform device ID as a fix number Here using 0 to match the busnum used in i2c_regsiter_board_info() Signed-off-by: Bo Shen Acked-by: Jean Delvare Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Ludovic Desroches Cc: stable [very long time] --- arch/arm/mach-at91/at91rm9200_devices.c | 2 +- arch/arm/mach-at91/at91sam9260_devices.c | 2 +- arch/arm/mach-at91/at91sam9261_devices.c | 2 +- arch/arm/mach-at91/at91sam9263_devices.c | 2 +- arch/arm/mach-at91/at91sam9rl_devices.c | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index a563189cdfc..7cd80533ec5 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -479,7 +479,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91rm9200_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index a76b8684f52..44385a4bc90 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -389,7 +389,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9260_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 9752f17efba..0256a007d1b 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -285,7 +285,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9261_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 8dde220b42b..23b63841035 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -567,7 +567,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index d6ca0543ce8..3d2c81dd3bb 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -314,7 +314,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9rl_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; -- cgit v1.2.3-70-g09d2 From 302090a66b85bb82023b07a715f9c9a347be2ac8 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Mon, 15 Oct 2012 17:30:28 +0800 Subject: ARM: at91/i2c: change id to let i2c-at91 work The i2c core driver will turn the platform device ID to busnum When using platfrom device ID as -1, it means dynamically assigned the busnum. When writing code, we need to make sure the busnum, and call i2c_register_board_info(int busnum, ...) to register device if using -1, we do not know the value of busnum In order to solve this issue, set the platform device ID as a fix number Here using 0 to match the busnum used in i2c_regsiter_board_info() Signed-off-by: Bo Shen Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Ludovic Desroches --- arch/arm/mach-at91/at91rm9200.c | 2 +- arch/arm/mach-at91/at91rm9200_devices.c | 2 +- arch/arm/mach-at91/at91sam9260.c | 4 ++-- arch/arm/mach-at91/at91sam9260_devices.c | 2 +- arch/arm/mach-at91/at91sam9261.c | 4 ++-- arch/arm/mach-at91/at91sam9261_devices.c | 2 +- arch/arm/mach-at91/at91sam9263.c | 2 +- arch/arm/mach-at91/at91sam9263_devices.c | 2 +- arch/arm/mach-at91/at91sam9rl_devices.c | 2 +- 9 files changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index b4f0565aff6..5269825194a 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -187,7 +187,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 7cd80533ec5..1e122bcd784 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -512,7 +512,7 @@ static struct resource twi_resources[] = { static struct platform_device at91rm9200_twi_device = { .name = "i2c-at91rm9200", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index ad29f93f20c..f8202615f4a 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -211,8 +211,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 44385a4bc90..aa1e5872988 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -421,7 +421,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9260_twi_device = { - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 8d999eb1a13..04295c04b3e 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,8 +178,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 0256a007d1b..b9487696b7b 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -317,7 +317,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9261_twi_device = { - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 6a01d0360df..d6f9c23927c 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -193,7 +193,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 23b63841035..cb85da2ecce 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -600,7 +600,7 @@ static struct resource twi_resources[] = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-at91sam9260", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 3d2c81dd3bb..5047bdc92ad 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -347,7 +347,7 @@ static struct resource twi_resources[] = { static struct platform_device at91sam9rl_twi_device = { .name = "i2c-at91sam9g20", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; -- cgit v1.2.3-70-g09d2 From 08d04a135a1c2e24c4d4bc7bbafee5e0e58f80c6 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 17 Oct 2012 15:41:31 +0200 Subject: ARM: at91: drop duplicated config SOC_AT91SAM9 entry Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre --- arch/arm/mach-at91/Kconfig | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index b1420710193..043624219b5 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -21,19 +21,13 @@ config SOC_AT91SAM9 bool select CPU_ARM926T select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER + select SPARSE_IRQ menu "Atmel AT91 System-on-Chip" comment "Atmel AT91 Processor" -config SOC_AT91SAM9 - bool - select AT91_SAM9_SMC - select AT91_SAM9_TIME - select CPU_ARM926T - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T -- cgit v1.2.3-70-g09d2