From 25499d9353e8cc6b0cf205684b3ebc535f8b9372 Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Mon, 26 Jul 2010 16:34:27 -0600 Subject: OMAP3: wait on IDLEST after enabling USBTLL fclk We need to wait on the IDLEST bit after the clocks are enabled before attempting to access any register. Currently, the USBTLL i-clock ops uses the clkops_omap2_dflt_wait, while the USBTLL f-clock ops uses clkops_omap2_dflt. If the i-clock is enabled first, the clkops_omap2_dflt_wait is short-circuited as the companion f-clock is not enabled. This can cause a data abort if the IDLEST has not transitioned, and we try to access a USBTLL register. Since the USBTLL i-clock and f-clock could be enabled in any order, this is a bug. Fix it by changing the clkops for the f-clock. Signed-off-by: Anand Gadiyar Acked-by: Kevin Hilman Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/clock3xxx_data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 41b155acfca..c226798e9ac 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -1408,7 +1408,7 @@ static struct clk ts_fck = { static struct clk usbtll_fck = { .name = "usbtll_fck", - .ops = &clkops_omap2_dflt, + .ops = &clkops_omap2_dflt_wait, .parent = &dpll5_m2_ck, .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, -- cgit v1.2.3-70-g09d2 From b3c1cff6985a78dcf2842960f866b07230ccef10 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 26 Jul 2010 16:34:27 -0600 Subject: OMAP: clock: add kerneldoc for structures; move flags closer to structs Add kerneldoc for struct clk, struct clksel_rate, struct clksel. Move flag macros for struct clk.flags and struct clksel_rate.flags closer to the structures. Signed-off-by: Paul Walmsley --- arch/arm/plat-omap/include/plat/clock.h | 130 ++++++++++++++++++++++++++------ 1 file changed, 107 insertions(+), 23 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index dfc472ca0cc..fef4696dcf6 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -19,6 +19,22 @@ struct module; struct clk; struct clockdomain; +/** + * struct clkops - some clock function pointers + * @enable: fn ptr that enables the current clock in hardware + * @disable: fn ptr that enables the current clock in hardware + * @find_idlest: function returning the IDLEST register for the clock's IP blk + * @find_companion: function returning the "companion" clk reg for the clock + * + * A "companion" clk is an accompanying clock to the one being queried + * that must be enabled for the IP module connected to the clock to + * become accessible by the hardware. Neither @find_idlest nor + * @find_companion should be needed; that information is IP + * block-specific; the hwmod code has been created to handle this, but + * until hwmod data is ready and drivers have been converted to use PM + * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and + * @find_companion must, unfortunately, remain. + */ struct clkops { int (*enable)(struct clk *); void (*disable)(struct clk *); @@ -30,12 +46,45 @@ struct clkops { #ifdef CONFIG_ARCH_OMAP2PLUS +/* struct clksel_rate.flags possibilities */ +#define RATE_IN_242X (1 << 0) +#define RATE_IN_243X (1 << 1) +#define RATE_IN_3XXX (1 << 2) /* rates common to all OMAP3 */ +#define RATE_IN_3430ES2 (1 << 3) /* 3430ES2 rates only */ +#define RATE_IN_36XX (1 << 4) +#define RATE_IN_4430 (1 << 5) + +#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) +#define RATE_IN_3430ES2PLUS (RATE_IN_3430ES2 | RATE_IN_36XX) + +/** + * struct clksel_rate - register bitfield values corresponding to clk divisors + * @val: register bitfield value (shifted to bit 0) + * @div: clock divisor corresponding to @val + * @flags: (see "struct clksel_rate.flags possibilities" above) + * + * @val should match the value of a read from struct clk.clksel_reg + * AND'ed with struct clk.clksel_mask, shifted right to bit 0. + * + * @div is the divisor that should be applied to the parent clock's rate + * to produce the current clock's rate. + * + * XXX @flags probably should be replaced with an struct omap_chip. + */ struct clksel_rate { u32 val; u8 div; u8 flags; }; +/** + * struct clksel - available parent clocks, and a pointer to their divisors + * @parent: struct clk * to a possible parent clock + * @rates: available divisors for this parent clock + * + * A struct clksel is always associated with one or more struct clks + * and one or more struct clksel_rates. + */ struct clksel { struct clk *parent; const struct clksel_rate *rates; @@ -116,6 +165,60 @@ struct dpll_data { #endif +/* struct clk.flags possibilities */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ + +/** + * struct clk - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @ops: struct clkops * for this clock + * @name: the name of the clock in the hardware (used in hwmod data and debug) + * @parent: pointer to this clock's parent struct clk + * @children: list_head connecting to the child clks' @sibling list_heads + * @sibling: list_head connecting this clk to its parent clk's @children + * @rate: current clock rate + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @recalc: fn ptr that returns the clock's current rate + * @set_rate: fn ptr that can change the clock's current rate + * @round_rate: fn ptr that can round the clock's current rate + * @init: fn ptr to do clock-specific initialization + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @usecount: number of users that have requested this clock to be enabled + * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div + * @flags: see "struct clk.flags possibilities" above + * @clksel_reg: for clksel clks, register va containing src/divisor select + * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector + * @clksel: for clksel clks, pointer to struct clksel for this clock + * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock + * @clkdm_name: clockdomain name that this clock is contained in + * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime + * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) + * @src_offset: bitshift for source selection bitfield (OMAP1 only) + * + * XXX @rate_offset, @src_offset should probably be removed and OMAP1 + * clock code converted to use clksel. + * + * XXX @usecount is poorly named. It should be "enable_count" or + * something similar. "users" in the description refers to kernel + * code (core code or drivers) that have called clk_enable() and not + * yet called clk_disable(); the usecount of parent clocks is also + * incremented by the clock code when clk_enable() is called on child + * clocks and decremented by the clock code when clk_disable() is + * called on child clocks. + * + * XXX @clkdm, @usecount, @children, @sibling should be marked for + * internal use only. + * + * @children and @sibling are used to optimize parent-to-child clock + * tree traversals. (child-to-parent traversals use @parent.) + * + * XXX The notion of the clock's current rate probably needs to be + * separated from the clock's target rate. + */ struct clk { struct list_head node; const struct clkops *ops; @@ -129,8 +232,8 @@ struct clk { int (*set_rate)(struct clk *, unsigned long); long (*round_rate)(struct clk *, unsigned long); void (*init)(struct clk *); - __u8 enable_bit; - __s8 usecount; + u8 enable_bit; + s8 usecount; u8 fixed_div; u8 flags; #ifdef CONFIG_ARCH_OMAP2PLUS @@ -141,8 +244,8 @@ struct clk { const char *clkdm_name; struct clockdomain *clkdm; #else - __u8 rate_offset; - __u8 src_offset; + u8 rate_offset; + u8 src_offset; #endif #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) struct dentry *dent; /* For visible tree hierarchy */ @@ -188,23 +291,4 @@ extern const struct clkops clkops_null; extern struct clk dummy_ck; -/* Clock flags */ -#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ -#define CLOCK_IDLE_CONTROL (1 << 1) -#define CLOCK_NO_IDLE_PARENT (1 << 2) -#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ -#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ - -/* Clksel_rate flags */ -#define RATE_IN_242X (1 << 0) -#define RATE_IN_243X (1 << 1) -#define RATE_IN_3XXX (1 << 2) /* rates common to all OMAP3 */ -#define RATE_IN_3430ES2 (1 << 3) /* 3430ES2 rates only */ -#define RATE_IN_36XX (1 << 4) -#define RATE_IN_4430 (1 << 5) - -#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) - -#define RATE_IN_3430ES2PLUS (RATE_IN_3430ES2 | RATE_IN_36XX) - #endif -- cgit v1.2.3-70-g09d2 From 936305a96ce1611093ad7a5591a62f9d7142be7c Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 26 Jul 2010 16:34:27 -0600 Subject: OMAP1: OPP: add KConfig entry for 96MHz ARM rate (using a 12MHz oscillator) Add KConfig entry for one of the OMAP1 DVFS rates that was missing it. Based on the surrounding rate KConfigs and the oscillator frequency, this patch marks it as valid for all OMAP1 platforms -- Richard, Tuukka, Tony, perhaps you can comment if this does not look right? In the long term, all of these CONFIG_OMAP_ARM_*MHZ should be removed. The OPP settings should be associated with the platform information in the structure data (perhaps by extending the omap_chip defines). The selection of which rates to use should be handled at runtime; rates that are impossible due to xtal frequency mismatch or SoC-type mismatch should not be included. If implemented correctly, this should save some CPU time and some memory on OMAP1 kernels. Reported-by: Christoph Egger Reported-by: The VAMOS Research Project Cc: Marek Vasut Cc: Richard Woodruff Cc: Tuukka Tikkanen Cc: Tony Lindgren Signed-off-by: Paul Walmsley --- arch/arm/mach-omap1/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index b18d7c28ab7..b9f0c4c46bb 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -224,6 +224,12 @@ config OMAP_ARM_120MHZ help Enable 120MHz clock for OMAP CPU. If unsure, say N. +config OMAP_ARM_96MHZ + bool "OMAP ARM 96 MHz CPU" + depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) + help + Enable 96MHz clock for OMAP CPU. If unsure, say N. + config OMAP_ARM_60MHZ bool "OMAP ARM 60 MHz CPU" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850) -- cgit v1.2.3-70-g09d2 From fb2fc9204f8ce060d239ab41f09cf6fc6de5ad4b Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 26 Jul 2010 16:34:28 -0600 Subject: OMAP1: clock: some cleanup Convert most of the magic numbers in mach-omap1/clock_data.c to use macros. Clean up a few comments to conform with Documentation/CodingStyle. Mark the current clkops_uart as being OMAP16xx-only, and add some comments to indicate that it does not belong there, for future cleanup. This patch should not cause any functional changes. Signed-off-by: Paul Walmsley --- arch/arm/mach-omap1/clock.c | 22 ++++--- arch/arm/mach-omap1/clock.h | 2 +- arch/arm/mach-omap1/clock_data.c | 129 +++++++++++++++++++++++++++++++-------- 3 files changed, 116 insertions(+), 37 deletions(-) diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 6bbb1b8b829..b8c7fb9d792 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -11,7 +11,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include #include #include #include @@ -34,9 +33,9 @@ __u32 arm_idlect1_mask; struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; -/*------------------------------------------------------------------------- +/* * Omap1 specific clock functions - *-------------------------------------------------------------------------*/ + */ unsigned long omap1_uart_recalc(struct clk *clk) { @@ -523,7 +522,8 @@ const struct clkops clkops_dspck = { .disable = omap1_clk_disable_dsp_domain, }; -static int omap1_clk_enable_uart_functional(struct clk *clk) +/* XXX SYSC register handling does not belong in the clock framework */ +static int omap1_clk_enable_uart_functional_16xx(struct clk *clk) { int ret; struct uart_clk *uclk; @@ -539,7 +539,8 @@ static int omap1_clk_enable_uart_functional(struct clk *clk) return ret; } -static void omap1_clk_disable_uart_functional(struct clk *clk) +/* XXX SYSC register handling does not belong in the clock framework */ +static void omap1_clk_disable_uart_functional_16xx(struct clk *clk) { struct uart_clk *uclk; @@ -550,9 +551,10 @@ static void omap1_clk_disable_uart_functional(struct clk *clk) omap1_clk_disable_generic(clk); } -const struct clkops clkops_uart = { - .enable = omap1_clk_enable_uart_functional, - .disable = omap1_clk_disable_uart_functional, +/* XXX SYSC register handling does not belong in the clock framework */ +const struct clkops clkops_uart_16xx = { + .enable = omap1_clk_enable_uart_functional_16xx, + .disable = omap1_clk_disable_uart_functional_16xx, }; long omap1_clk_round_rate(struct clk *clk, unsigned long rate) @@ -572,9 +574,9 @@ int omap1_clk_set_rate(struct clk *clk, unsigned long rate) return ret; } -/*------------------------------------------------------------------------- +/* * Omap1 clock reset and init functions - *-------------------------------------------------------------------------*/ + */ #ifdef CONFIG_OMAP_RESET_CLOCKS diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 75d0d7d90bf..eaf09efb91c 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -107,7 +107,7 @@ extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; extern const struct clkops clkops_dspck; extern const struct clkops clkops_dummy; -extern const struct clkops clkops_uart; +extern const struct clkops clkops_uart_16xx; extern const struct clkops clkops_generic; #endif diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index aa8558adbf1..ca4bd862033 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -8,6 +8,10 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * To do: + * - Clocks that are only available on some chips should be marked with the + * chips that they are present on. */ #include @@ -23,9 +27,49 @@ #include "clock.h" -/*------------------------------------------------------------------------ +/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */ +#define IDL_CLKOUT_ARM_SHIFT 12 +#define IDLTIM_ARM_SHIFT 9 +#define IDLAPI_ARM_SHIFT 8 +#define IDLIF_ARM_SHIFT 6 +#define IDLLB_ARM_SHIFT 4 /* undocumented? */ +#define OMAP1510_IDLLCD_ARM_SHIFT 3 /* undocumented? */ +#define IDLPER_ARM_SHIFT 2 +#define IDLXORP_ARM_SHIFT 1 +#define IDLWDT_ARM_SHIFT 0 + +/* Some MOD_CONF_CTRL_0 bit shifts - used in struct clk.enable_bit */ +#define CONF_MOD_UART3_CLK_MODE_R 31 +#define CONF_MOD_UART2_CLK_MODE_R 30 +#define CONF_MOD_UART1_CLK_MODE_R 29 +#define CONF_MOD_MMC_SD_CLK_REQ_R 23 +#define CONF_MOD_MCBSP3_AUXON 20 + +/* Some MOD_CONF_CTRL_1 bit shifts - used in struct clk.enable_bit */ +#define CONF_MOD_SOSSI_CLK_EN_R 16 + +/* Some OTG_SYSCON_2-specific bit fields */ +#define OTG_SYSCON_2_UHOST_EN_SHIFT 8 + +/* Some SOFT_REQ_REG bit fields - used in struct clk.enable_bit */ +#define SOFT_MMC2_DPLL_REQ_SHIFT 13 +#define SOFT_MMC_DPLL_REQ_SHIFT 12 +#define SOFT_UART3_DPLL_REQ_SHIFT 11 +#define SOFT_UART2_DPLL_REQ_SHIFT 10 +#define SOFT_UART1_DPLL_REQ_SHIFT 9 +#define SOFT_USB_OTG_DPLL_REQ_SHIFT 8 +#define SOFT_CAM_DPLL_REQ_SHIFT 7 +#define SOFT_COM_MCKO_REQ_SHIFT 6 +#define SOFT_PERIPH_REQ_SHIFT 5 /* sys_ck gate for UART2 ? */ +#define USB_REQ_EN_SHIFT 4 +#define SOFT_USB_REQ_SHIFT 3 /* sys_ck gate for USB host? */ +#define SOFT_SDW_REQ_SHIFT 2 /* sys_ck gate for Bluetooth? */ +#define SOFT_COM_REQ_SHIFT 1 /* sys_ck gate for com proc? */ +#define SOFT_DPLL_REQ_SHIFT 0 + +/* * Omap1 clocks - *-------------------------------------------------------------------------*/ + */ static struct clk ck_ref = { .name = "ck_ref", @@ -54,7 +98,7 @@ static struct arm_idlect1_clk ck_dpll1out = { .enable_bit = EN_CKOUT_ARM, .recalc = &followparent_recalc, }, - .idlect_shift = 12, + .idlect_shift = IDL_CLKOUT_ARM_SHIFT, }; static struct clk sossi_ck = { @@ -63,7 +107,7 @@ static struct clk sossi_ck = { .parent = &ck_dpll1out.clk, .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), - .enable_bit = 16, + .enable_bit = CONF_MOD_SOSSI_CLK_EN_R, .recalc = &omap1_sossi_recalc, .set_rate = &omap1_set_sossi_rate, }; @@ -91,7 +135,7 @@ static struct arm_idlect1_clk armper_ck = { .round_rate = omap1_clk_round_rate_ckctl_arm, .set_rate = omap1_clk_set_rate_ckctl_arm, }, - .idlect_shift = 2, + .idlect_shift = IDLPER_ARM_SHIFT, }; /* @@ -118,7 +162,7 @@ static struct arm_idlect1_clk armxor_ck = { .enable_bit = EN_XORPCK, .recalc = &followparent_recalc, }, - .idlect_shift = 1, + .idlect_shift = IDLXORP_ARM_SHIFT, }; static struct arm_idlect1_clk armtim_ck = { @@ -131,7 +175,7 @@ static struct arm_idlect1_clk armtim_ck = { .enable_bit = EN_TIMCK, .recalc = &followparent_recalc, }, - .idlect_shift = 9, + .idlect_shift = IDLTIM_ARM_SHIFT, }; static struct arm_idlect1_clk armwdt_ck = { @@ -145,7 +189,7 @@ static struct arm_idlect1_clk armwdt_ck = { .fixed_div = 14, .recalc = &omap_fixed_divisor_recalc, }, - .idlect_shift = 0, + .idlect_shift = IDLWDT_ARM_SHIFT, }; static struct clk arminth_ck16xx = { @@ -212,7 +256,6 @@ static struct clk dsptim_ck = { .recalc = &followparent_recalc, }; -/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ static struct arm_idlect1_clk tc_ck = { .clk = { .name = "tc_ck", @@ -224,7 +267,7 @@ static struct arm_idlect1_clk tc_ck = { .round_rate = omap1_clk_round_rate_ckctl_arm, .set_rate = omap1_clk_set_rate_ckctl_arm, }, - .idlect_shift = 6, + .idlect_shift = IDLIF_ARM_SHIFT, }; static struct clk arminth_ck1510 = { @@ -304,7 +347,7 @@ static struct arm_idlect1_clk api_ck = { .enable_bit = EN_APICK, .recalc = &followparent_recalc, }, - .idlect_shift = 8, + .idlect_shift = IDLAPI_ARM_SHIFT, }; static struct arm_idlect1_clk lb_ck = { @@ -317,7 +360,7 @@ static struct arm_idlect1_clk lb_ck = { .enable_bit = EN_LBCK, .recalc = &followparent_recalc, }, - .idlect_shift = 4, + .idlect_shift = IDLLB_ARM_SHIFT, }; static struct clk rhea1_ck = { @@ -359,9 +402,15 @@ static struct arm_idlect1_clk lcd_ck_1510 = { .round_rate = omap1_clk_round_rate_ckctl_arm, .set_rate = omap1_clk_set_rate_ckctl_arm, }, - .idlect_shift = 3, + .idlect_shift = OMAP1510_IDLLCD_ARM_SHIFT, }; +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX does this need SYSC register handling? + */ static struct clk uart1_1510 = { .name = "uart1_ck", .ops = &clkops_null, @@ -370,25 +419,37 @@ static struct clk uart1_1510 = { .rate = 12000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ + .enable_bit = CONF_MOD_UART1_CLK_MODE_R, .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, }; +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX SYSC register handling does not belong in the clock framework + */ static struct uart_clk uart1_16xx = { .clk = { .name = "uart1_ck", - .ops = &clkops_uart, + .ops = &clkops_uart_16xx, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 29, + .enable_bit = CONF_MOD_UART1_CLK_MODE_R, }, .sysc_addr = 0xfffb0054, }; +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX does this need SYSC register handling? + */ static struct clk uart2_ck = { .name = "uart2_ck", .ops = &clkops_null, @@ -397,11 +458,17 @@ static struct clk uart2_ck = { .rate = 12000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ + .enable_bit = CONF_MOD_UART2_CLK_MODE_R, .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, }; +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX does this need SYSC register handling? + */ static struct clk uart3_1510 = { .name = "uart3_ck", .ops = &clkops_null, @@ -410,21 +477,27 @@ static struct clk uart3_1510 = { .rate = 12000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ + .enable_bit = CONF_MOD_UART3_CLK_MODE_R, .set_rate = &omap1_set_uart_rate, .recalc = &omap1_uart_recalc, }; +/* + * XXX The enable_bit here is misused - it simply switches between 12MHz + * and 48MHz. Reimplement with clksel. + * + * XXX SYSC register handling does not belong in the clock framework + */ static struct uart_clk uart3_16xx = { .clk = { .name = "uart3_ck", - .ops = &clkops_uart, + .ops = &clkops_uart_16xx, /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 31, + .enable_bit = CONF_MOD_UART3_CLK_MODE_R, }, .sysc_addr = 0xfffb9854, }; @@ -457,7 +530,7 @@ static struct clk usb_hhc_ck16xx = { /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ .flags = ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ - .enable_bit = 8 /* UHOST_EN */, + .enable_bit = OTG_SYSCON_2_UHOST_EN_SHIFT }; static struct clk usb_dc_ck = { @@ -466,7 +539,7 @@ static struct clk usb_dc_ck = { /* Direct from ULPD, no parent */ .rate = 48000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 4, + .enable_bit = USB_REQ_EN_SHIFT, }; static struct clk usb_dc_ck7xx = { @@ -475,7 +548,7 @@ static struct clk usb_dc_ck7xx = { /* Direct from ULPD, no parent */ .rate = 48000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 8, + .enable_bit = SOFT_USB_OTG_DPLL_REQ_SHIFT, }; static struct clk mclk_1510 = { @@ -484,7 +557,7 @@ static struct clk mclk_1510 = { /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .rate = 12000000, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 6, + .enable_bit = SOFT_COM_MCKO_REQ_SHIFT, }; static struct clk mclk_16xx = { @@ -524,9 +597,13 @@ static struct clk mmc1_ck = { .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 23, + .enable_bit = CONF_MOD_MMC_SD_CLK_REQ_R, }; +/* + * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as + * CONF_MOD_MCBSP3_AUXON ?? + */ static struct clk mmc2_ck = { .name = "mmc2_ck", .ops = &clkops_generic, @@ -546,7 +623,7 @@ static struct clk mmc3_ck = { .rate = 48000000, .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 12, + .enable_bit = SOFT_MMC_DPLL_REQ_SHIFT, }; static struct clk virtual_ck_mpu = { -- cgit v1.2.3-70-g09d2 From 6405616754f70a11c5410b321495fcd61e70b240 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 26 Jul 2010 16:34:28 -0600 Subject: OMAP24xx: CM: fix mask used for checking IDLEST status On OMAP24xx, the polarity for the IDLEST bits is opposite of OMAP3. The mask used to check this was using the bit position instead of the bit mask. This patch fixes the problem by using the bit mask instead of the bit field. Signed-off-by: Kevin Hilman Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/cm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/cm.c b/arch/arm/mach-omap2/cm.c index 2d83565d2be..721c3b66740 100644 --- a/arch/arm/mach-omap2/cm.c +++ b/arch/arm/mach-omap2/cm.c @@ -50,15 +50,15 @@ int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) cm_idlest_reg = cm_idlest_offs[idlest_id - 1]; + mask = 1 << idlest_shift; + if (cpu_is_omap24xx()) - ena = idlest_shift; + ena = mask; else if (cpu_is_omap34xx()) ena = 0; else BUG(); - mask = 1 << idlest_shift; - /* XXX should be OMAP2 CM */ omap_test_timeout(((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena), MAX_MODULE_READY_TIME, i); -- cgit v1.2.3-70-g09d2 From 2eb1875d2b7560e70c19a11daa00e06e0de9eea1 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 26 Jul 2010 16:34:28 -0600 Subject: OMAP2/3: hwmod: L3 and L4 CORE/PER/WKUP hwmods don't have IDLEST Since these hwmods do not have IDLEST, set the HWMOD_NO_IDLEST flag, otherwise _enable() will fail due to failing _wait_target_ready(). Signed-off-by: Kevin Hilman Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 9 ++++++--- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 9 ++++++--- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 12 ++++++++---- 3 files changed, 20 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index e5530c51f77..a8b57a648c7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -65,7 +65,8 @@ static struct omap_hwmod omap2420_l3_hwmod = { .masters_cnt = ARRAY_SIZE(omap2420_l3_masters), .slaves = omap2420_l3_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_l3_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), + .flags = HWMOD_NO_IDLEST, }; static struct omap_hwmod omap2420_l4_wkup_hwmod; @@ -95,7 +96,8 @@ static struct omap_hwmod omap2420_l4_core_hwmod = { .masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters), .slaves = omap2420_l4_core_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_l4_core_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), + .flags = HWMOD_NO_IDLEST, }; /* Slave interfaces on the L4_WKUP interconnect */ @@ -115,7 +117,8 @@ static struct omap_hwmod omap2420_l4_wkup_hwmod = { .masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters), .slaves = omap2420_l4_wkup_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_l4_wkup_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), + .flags = HWMOD_NO_IDLEST, }; /* Master interfaces on the MPU device */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 0852d954da4..8b1f74b7974 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -65,7 +65,8 @@ static struct omap_hwmod omap2430_l3_hwmod = { .masters_cnt = ARRAY_SIZE(omap2430_l3_masters), .slaves = omap2430_l3_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_l3_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .flags = HWMOD_NO_IDLEST, }; static struct omap_hwmod omap2430_l4_wkup_hwmod; @@ -97,7 +98,8 @@ static struct omap_hwmod omap2430_l4_core_hwmod = { .masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters), .slaves = omap2430_l4_core_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_l4_core_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .flags = HWMOD_NO_IDLEST, }; /* Slave interfaces on the L4_WKUP interconnect */ @@ -117,7 +119,8 @@ static struct omap_hwmod omap2430_l4_wkup_hwmod = { .masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters), .slaves = omap2430_l4_wkup_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_l4_wkup_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), + .flags = HWMOD_NO_IDLEST, }; /* Master interfaces on the MPU device */ diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 39b0c0eaa37..e288b2034fe 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -76,7 +76,8 @@ static struct omap_hwmod omap3xxx_l3_hwmod = { .masters_cnt = ARRAY_SIZE(omap3xxx_l3_masters), .slaves = omap3xxx_l3_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_l3_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .flags = HWMOD_NO_IDLEST, }; static struct omap_hwmod omap3xxx_l4_wkup_hwmod; @@ -106,7 +107,8 @@ static struct omap_hwmod omap3xxx_l4_core_hwmod = { .masters_cnt = ARRAY_SIZE(omap3xxx_l4_core_masters), .slaves = omap3xxx_l4_core_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_core_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .flags = HWMOD_NO_IDLEST, }; /* Slave interfaces on the L4_PER interconnect */ @@ -126,7 +128,8 @@ static struct omap_hwmod omap3xxx_l4_per_hwmod = { .masters_cnt = ARRAY_SIZE(omap3xxx_l4_per_masters), .slaves = omap3xxx_l4_per_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_per_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .flags = HWMOD_NO_IDLEST, }; /* Slave interfaces on the L4_WKUP interconnect */ @@ -146,7 +149,8 @@ static struct omap_hwmod omap3xxx_l4_wkup_hwmod = { .masters_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_masters), .slaves = omap3xxx_l4_wkup_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_slaves), - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), + .flags = HWMOD_NO_IDLEST, }; /* Master interfaces on the MPU device */ -- cgit v1.2.3-70-g09d2 From fa98347ebf1c516e49694e1584cd96a63428676a Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Mon, 26 Jul 2010 16:34:29 -0600 Subject: OMAP2&3: hwmod: Remove _hwmod prefix in name string In the lastest OMAP4 hwmod data file, the _hwmod was removed in order to save some memory space and because it does not bring a lot. Align OMAP2420, 2430 and 3430 data files with the same convention. Signed-off-by: Benoit Cousson Cc: Rajendra Nayak Acked-by: Kevin Hilman Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 6 +++--- arch/arm/mach-omap2/omap_hwmod_2430_data.c | 6 +++--- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 8 ++++---- 3 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index a8b57a648c7..646386cf867 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -59,7 +59,7 @@ static struct omap_hwmod_ocp_if *omap2420_l3_masters[] = { /* L3 */ static struct omap_hwmod omap2420_l3_hwmod = { - .name = "l3_hwmod", + .name = "l3_main", .class = &l3_hwmod_class, .masters = omap2420_l3_masters, .masters_cnt = ARRAY_SIZE(omap2420_l3_masters), @@ -90,7 +90,7 @@ static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = { /* L4 CORE */ static struct omap_hwmod omap2420_l4_core_hwmod = { - .name = "l4_core_hwmod", + .name = "l4_core", .class = &l4_hwmod_class, .masters = omap2420_l4_core_masters, .masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters), @@ -111,7 +111,7 @@ static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = { /* L4 WKUP */ static struct omap_hwmod omap2420_l4_wkup_hwmod = { - .name = "l4_wkup_hwmod", + .name = "l4_wkup", .class = &l4_hwmod_class, .masters = omap2420_l4_wkup_masters, .masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters), diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 8b1f74b7974..b2100cfb317 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -59,7 +59,7 @@ static struct omap_hwmod_ocp_if *omap2430_l3_masters[] = { /* L3 */ static struct omap_hwmod omap2430_l3_hwmod = { - .name = "l3_hwmod", + .name = "l3_main", .class = &l3_hwmod_class, .masters = omap2430_l3_masters, .masters_cnt = ARRAY_SIZE(omap2430_l3_masters), @@ -92,7 +92,7 @@ static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = { /* L4 CORE */ static struct omap_hwmod omap2430_l4_core_hwmod = { - .name = "l4_core_hwmod", + .name = "l4_core", .class = &l4_hwmod_class, .masters = omap2430_l4_core_masters, .masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters), @@ -113,7 +113,7 @@ static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = { /* L4 WKUP */ static struct omap_hwmod omap2430_l4_wkup_hwmod = { - .name = "l4_wkup_hwmod", + .name = "l4_wkup", .class = &l4_hwmod_class, .masters = omap2430_l4_wkup_masters, .masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters), diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index e288b2034fe..ec6a5f8d94a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -70,7 +70,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_l3_masters[] = { /* L3 */ static struct omap_hwmod omap3xxx_l3_hwmod = { - .name = "l3_hwmod", + .name = "l3_main", .class = &l3_hwmod_class, .masters = omap3xxx_l3_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_l3_masters), @@ -101,7 +101,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_masters[] = { /* L4 CORE */ static struct omap_hwmod omap3xxx_l4_core_hwmod = { - .name = "l4_core_hwmod", + .name = "l4_core", .class = &l4_hwmod_class, .masters = omap3xxx_l4_core_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_l4_core_masters), @@ -122,7 +122,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_per_masters[] = { /* L4 PER */ static struct omap_hwmod omap3xxx_l4_per_hwmod = { - .name = "l4_per_hwmod", + .name = "l4_per", .class = &l4_hwmod_class, .masters = omap3xxx_l4_per_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_l4_per_masters), @@ -143,7 +143,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_wkup_masters[] = { /* L4 WKUP */ static struct omap_hwmod omap3xxx_l4_wkup_hwmod = { - .name = "l4_wkup_hwmod", + .name = "l4_wkup", .class = &l4_hwmod_class, .masters = omap3xxx_l4_wkup_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_masters), -- cgit v1.2.3-70-g09d2 From 848240223c35fcc71c424ad51a8e8aef42d3879c Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 26 Jul 2010 16:34:29 -0600 Subject: OMAP: hwmod: add non-locking versions of enable and idle functions Some hwmods may need to be idled/enabled in atomic context, so non-locking versions of these functions are required. Most users should not need these and usage of theses should be controlled to understand why access is being done in atomic context. For this reason, the non-locking functions are only exposed at the hwmod level and not at the omap-device level. The use-case that led to the need for the non-locking versions is hwmods that are enabled/idled from within the core idle/suspend path. Since interrupts are already disabled here, the mutex-based locking in hwmod can sleep and will cause potential deadlocks. Signed-off-by: Kevin Hilman Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod.c | 19 ++++++++++--------- arch/arm/plat-omap/include/plat/omap_hwmod.h | 2 ++ 2 files changed, 12 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index b7a4133267d..a23a60ad405 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -886,7 +886,7 @@ static int _reset(struct omap_hwmod *oh) } /** - * _enable - enable an omap_hwmod + * _omap_hwmod_enable - enable an omap_hwmod * @oh: struct omap_hwmod * * * Enables an omap_hwmod @oh such that the MPU can access the hwmod's @@ -894,7 +894,7 @@ static int _reset(struct omap_hwmod *oh) * Returns -EINVAL if the hwmod is in the wrong state or passes along * the return value of _wait_target_ready(). */ -static int _enable(struct omap_hwmod *oh) +int _omap_hwmod_enable(struct omap_hwmod *oh) { int r; @@ -939,7 +939,7 @@ static int _enable(struct omap_hwmod *oh) * no further work. Returns -EINVAL if the hwmod is in the wrong * state or returns 0. */ -static int _idle(struct omap_hwmod *oh) +int _omap_hwmod_idle(struct omap_hwmod *oh) { if (oh->_state != _HWMOD_STATE_ENABLED) { WARN(1, "omap_hwmod: %s: idle state can only be entered from " @@ -1029,7 +1029,7 @@ static int _setup(struct omap_hwmod *oh) oh->_state = _HWMOD_STATE_INITIALIZED; - r = _enable(oh); + r = _omap_hwmod_enable(oh); if (r) { pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n", oh->name, oh->_state); @@ -1041,7 +1041,7 @@ static int _setup(struct omap_hwmod *oh) * XXX Do the OCP_SYSCONFIG bits need to be * reprogrammed after a reset? If not, then this can * be removed. If they do, then probably the - * _enable() function should be split to avoid the + * _omap_hwmod_enable() function should be split to avoid the * rewrite of the OCP_SYSCONFIG register. */ if (oh->class->sysc) { @@ -1051,7 +1051,7 @@ static int _setup(struct omap_hwmod *oh) } if (!(oh->flags & HWMOD_INIT_NO_IDLE)) - _idle(oh); + _omap_hwmod_idle(oh); return 0; } @@ -1292,12 +1292,13 @@ int omap_hwmod_enable(struct omap_hwmod *oh) return -EINVAL; mutex_lock(&omap_hwmod_mutex); - r = _enable(oh); + r = _omap_hwmod_enable(oh); mutex_unlock(&omap_hwmod_mutex); return r; } + /** * omap_hwmod_idle - idle an omap_hwmod * @oh: struct omap_hwmod * @@ -1311,7 +1312,7 @@ int omap_hwmod_idle(struct omap_hwmod *oh) return -EINVAL; mutex_lock(&omap_hwmod_mutex); - _idle(oh); + _omap_hwmod_idle(oh); mutex_unlock(&omap_hwmod_mutex); return 0; @@ -1413,7 +1414,7 @@ int omap_hwmod_reset(struct omap_hwmod *oh) mutex_lock(&omap_hwmod_mutex); r = _reset(oh); if (!r) - r = _enable(oh); + r = _omap_hwmod_enable(oh); mutex_unlock(&omap_hwmod_mutex); return r; diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 0eccc09ac4a..253f6e55638 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -486,7 +486,9 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh)); int omap_hwmod_late_init(void); int omap_hwmod_enable(struct omap_hwmod *oh); +int _omap_hwmod_enable(struct omap_hwmod *oh); int omap_hwmod_idle(struct omap_hwmod *oh); +int _omap_hwmod_idle(struct omap_hwmod *oh); int omap_hwmod_shutdown(struct omap_hwmod *oh); int omap_hwmod_enable_clocks(struct omap_hwmod *oh); -- cgit v1.2.3-70-g09d2 From 97d60162f64ef068b639d8a77ef3bc148baa53ad Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 26 Jul 2010 16:34:30 -0600 Subject: OMAP: hwmod: allow omap_hwmod_late_init() caller to skip module idle in _setup() On kernels that don't use the omap_device_enable() calls to enable devices, leave all on-chip devices enabled in hwmod _setup(). Otherwise, accesses to those devices are likely to fail, crashing the system. It's expected that kernels built without CONFIG_PM_RUNTIME will be the primary use-case for this. This functionality is controlled by adding an extra parameter to omap_hwmod_late_init(). This patch is based on the patch "OMAP: hwmod: don't auto-disable hwmod when !CONFIG_PM_RUNTIME" by Kevin Hilman . Cc: Kevin Hilman Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/io.c | 9 ++++++- arch/arm/mach-omap2/omap_hwmod.c | 37 +++++++++++++++++++--------- arch/arm/plat-omap/include/plat/omap_hwmod.h | 5 ++-- 3 files changed, 36 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3cfb425ea67..e95b47b3bfd 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -316,6 +316,8 @@ static int __init _omap2_init_reprogram_sdrc(void) void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1) { + u8 skip_setup_idle = 0; + pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_autodeps); if (cpu_is_omap242x()) @@ -340,8 +342,13 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, pr_err("Could not init clock framework - unknown CPU\n"); omap_serial_early_init(); + +#ifndef CONFIG_PM_RUNTIME + skip_setup_idle = 1; +#endif if (cpu_is_omap24xx() || cpu_is_omap34xx()) /* FIXME: OMAP4 */ - omap_hwmod_late_init(); + omap_hwmod_late_init(skip_setup_idle); + omap_pm_if_init(); if (cpu_is_omap24xx() || cpu_is_omap34xx()) { omap2_sdrc_init(sdrc_cs0, sdrc_cs1); diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index a23a60ad405..b2c8e8760c8 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -764,6 +764,7 @@ static struct omap_hwmod *_lookup(const char *name) /** * _init_clocks - clk_get() all clocks associated with this hwmod * @oh: struct omap_hwmod * + * @data: not used; pass NULL * * Called by omap_hwmod_late_init() (after omap2_clk_init()). * Resolves all clock names embedded in the hwmod. Must be called @@ -771,7 +772,7 @@ static struct omap_hwmod *_lookup(const char *name) * has not yet been registered or if the clocks have already been * initialized, 0 on success, or a non-zero error on failure. */ -static int _init_clocks(struct omap_hwmod *oh) +static int _init_clocks(struct omap_hwmod *oh, void *data) { int ret = 0; @@ -996,19 +997,25 @@ static int _shutdown(struct omap_hwmod *oh) /** * _setup - do initial configuration of omap_hwmod * @oh: struct omap_hwmod * + * @skip_setup_idle_p: do not idle hwmods at the end of the fn if 1 * * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh - * OCP_SYSCONFIG register. Must be called with omap_hwmod_mutex - * held. Returns -EINVAL if the hwmod is in the wrong state or returns - * 0. + * OCP_SYSCONFIG register. Must be called with omap_hwmod_mutex held. + * @skip_setup_idle is intended to be used on a system that will not + * call omap_hwmod_enable() to enable devices (e.g., a system without + * PM runtime). Returns -EINVAL if the hwmod is in the wrong state or + * returns 0. */ -static int _setup(struct omap_hwmod *oh) +static int _setup(struct omap_hwmod *oh, void *data) { int i, r; + u8 skip_setup_idle; - if (!oh) + if (!oh || !data) return -EINVAL; + skip_setup_idle = *(u8 *)data; + /* Set iclk autoidle mode */ if (oh->slaves_cnt > 0) { for (i = 0; i < oh->slaves_cnt; i++) { @@ -1050,7 +1057,7 @@ static int _setup(struct omap_hwmod *oh) } } - if (!(oh->flags & HWMOD_INIT_NO_IDLE)) + if (!(oh->flags & HWMOD_INIT_NO_IDLE) && !skip_setup_idle) _omap_hwmod_idle(oh); return 0; @@ -1164,6 +1171,7 @@ struct omap_hwmod *omap_hwmod_lookup(const char *name) /** * omap_hwmod_for_each - call function for each registered omap_hwmod * @fn: pointer to a callback function + * @data: void * data to pass to callback function * * Call @fn for each registered omap_hwmod, passing @data to each * function. @fn must return 0 for success or any other value for @@ -1172,7 +1180,8 @@ struct omap_hwmod *omap_hwmod_lookup(const char *name) * caller of omap_hwmod_for_each(). @fn is called with * omap_hwmod_for_each() held. */ -int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh)) +int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), + void *data) { struct omap_hwmod *temp_oh; int ret; @@ -1182,7 +1191,7 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh)) mutex_lock(&omap_hwmod_mutex); list_for_each_entry(temp_oh, &omap_hwmod_list, node) { - ret = (*fn)(temp_oh); + ret = (*fn)(temp_oh, data); if (ret) break; } @@ -1229,24 +1238,28 @@ int omap_hwmod_init(struct omap_hwmod **ohs) /** * omap_hwmod_late_init - do some post-clock framework initialization + * @skip_setup_idle: if 1, do not idle hwmods in _setup() * * Must be called after omap2_clk_init(). Resolves the struct clk names * to struct clk pointers for each registered omap_hwmod. Also calls * _setup() on each hwmod. Returns 0. */ -int omap_hwmod_late_init(void) +int omap_hwmod_late_init(u8 skip_setup_idle) { int r; /* XXX check return value */ - r = omap_hwmod_for_each(_init_clocks); + r = omap_hwmod_for_each(_init_clocks, NULL); WARN(r, "omap_hwmod: omap_hwmod_late_init(): _init_clocks failed\n"); mpu_oh = omap_hwmod_lookup(MPU_INITIATOR_NAME); WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n", MPU_INITIATOR_NAME); - omap_hwmod_for_each(_setup); + if (skip_setup_idle) + pr_debug("omap_hwmod: will leave hwmods enabled during setup\n"); + + omap_hwmod_for_each(_setup, &skip_setup_idle); return 0; } diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 253f6e55638..aebfacb3106 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -482,8 +482,9 @@ int omap_hwmod_init(struct omap_hwmod **ohs); int omap_hwmod_register(struct omap_hwmod *oh); int omap_hwmod_unregister(struct omap_hwmod *oh); struct omap_hwmod *omap_hwmod_lookup(const char *name); -int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh)); -int omap_hwmod_late_init(void); +int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data), + void *data); +int omap_hwmod_late_init(u8 skip_setup_idle); int omap_hwmod_enable(struct omap_hwmod *oh); int _omap_hwmod_enable(struct omap_hwmod *oh); -- cgit v1.2.3-70-g09d2 From 681fddc6d087359c1e3f86529973f5bf62afe4c0 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Mon, 26 Jul 2010 16:34:30 -0600 Subject: OMAP4: hwmod: Enable omap_device build for OMAP4 Enable omap_device layer support for OMAP4, so that drivers can use them to enable/idle/shutdown devices. Signed-off-by: Rajendra Nayak Signed-off-by: Benoit Cousson Signed-off-by: Kevin Hilman Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/plat-omap/Makefile | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index ea52b034e96..3b5d184b30b 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -15,7 +15,7 @@ clock-common = clock.o clock_common_data.o \ obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common) -obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) +obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) $(hwmod-common) obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 98f01910c2c..9405831b746 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o # omap_device support (OMAP2+ only at the moment) obj-$(CONFIG_ARCH_OMAP2) += omap_device.o obj-$(CONFIG_ARCH_OMAP3) += omap_device.o +obj-$(CONFIG_ARCH_OMAP4) += omap_device.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o -- cgit v1.2.3-70-g09d2 From 0656358159d7e26205bb9360840759c7c3c0725f Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 26 Jul 2010 16:34:30 -0600 Subject: OMAP: omap_device: ensure hwmod tracks attached omap_device pointer The omap_hwmod struct has a field to track the omap_device that is attached to it, but it was not being assigned. Fix by assigning omap_device pointer when omap_device is built. Signed-off-by: Kevin Hilman [paul@pwsan.com: use an array index rather than pointer arithmetic] Signed-off-by: Paul Walmsley --- arch/arm/plat-omap/omap_device.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index f899603051a..f9dec0d32fa 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -359,7 +359,7 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, struct omap_device *od; char *pdev_name2; struct resource *res = NULL; - int res_count; + int i, res_count; struct omap_hwmod **hwmods; if (!ohs || oh_cnt == 0 || !pdev_name) @@ -416,6 +416,9 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, else ret = omap_device_register(od); + for (i = 0; i < oh_cnt; i++) + hwmods[i]->od = od; + if (ret) goto odbs_exit4; -- cgit v1.2.3-70-g09d2 From 6f88e9bc21746be9b15f1d8dcacf7595807e8828 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 26 Jul 2010 16:34:31 -0600 Subject: OMAP: PM: create omap_devices for MPU, DSP, L3 Create simple omap_devices for the main processors and busses. This is required to support the forth-coming device-based OPP approach, where OPPs are managed and tracked at the device level. Also, move these common PM init functions into a common_pm_init call that is called as a device_initcall(). The PM init is done at this level to ensure that the driver core is initialized before initialized. Signed-off-by: Kevin Hilman [paul@pwsan.com: sparse warnings cleaned up; newly-created functions moved from mach-omap2/io.c to mach-omap2/pm.c; newly-created functions renamed to start with "omap2" rather than "omap"] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-omap2/io.c | 2 +- arch/arm/mach-omap2/pm.c | 84 ++++++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/common.h | 4 ++ 4 files changed, 90 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-omap2/pm.c diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 3b5d184b30b..d5438967448 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o +obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o omap-2-3-common = irq.o sdrc.o hwmod-common = omap_hwmod.o \ diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index e95b47b3bfd..d1906c73aec 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -45,6 +45,7 @@ #include #include "clockdomains.h" + #include /* @@ -349,7 +350,6 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, if (cpu_is_omap24xx() || cpu_is_omap34xx()) /* FIXME: OMAP4 */ omap_hwmod_late_init(skip_setup_idle); - omap_pm_if_init(); if (cpu_is_omap24xx() || cpu_is_omap34xx()) { omap2_sdrc_init(sdrc_cs0, sdrc_cs1); _omap2_init_reprogram_sdrc(); diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c new file mode 100644 index 00000000000..68f9f2e9589 --- /dev/null +++ b/arch/arm/mach-omap2/pm.c @@ -0,0 +1,84 @@ +/* + * pm.c - Common OMAP2+ power management-related code + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2010 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include +#include + +static struct omap_device_pm_latency *pm_lats; + +static struct device *mpu_dev; +static struct device *dsp_dev; +static struct device *l3_dev; + +struct device *omap2_get_mpuss_device(void) +{ + WARN_ON_ONCE(!mpu_dev); + return mpu_dev; +} + +struct device *omap2_get_dsp_device(void) +{ + WARN_ON_ONCE(!dsp_dev); + return dsp_dev; +} + +struct device *omap2_get_l3_device(void) +{ + WARN_ON_ONCE(!l3_dev); + return l3_dev; +} + +/* static int _init_omap_device(struct omap_hwmod *oh, void *user) */ +static int _init_omap_device(char *name, struct device **new_dev) +{ + struct omap_hwmod *oh; + struct omap_device *od; + + oh = omap_hwmod_lookup(name); + if (WARN(!oh, "%s: could not find omap_hwmod for %s\n", + __func__, name)) + return -ENODEV; + + od = omap_device_build(oh->name, 0, oh, NULL, 0, pm_lats, 0, false); + if (WARN(IS_ERR(od), "%s: could not build omap_device for %s\n", + __func__, name)) + return -ENODEV; + + *new_dev = &od->pdev.dev; + + return 0; +} + +/* + * Build omap_devices for processors and bus. + */ +static void omap2_init_processor_devices(void) +{ + _init_omap_device("mpu", &mpu_dev); + _init_omap_device("iva", &dsp_dev); + _init_omap_device("l3_main", &l3_dev); +} + +static int __init omap2_common_pm_init(void) +{ + omap2_init_processor_devices(); + omap_pm_if_init(); + + return 0; +} +device_initcall(omap2_common_pm_init); + diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index d265018f5e6..fe83e901ba6 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -87,4 +87,8 @@ void omap2_set_globals_uart(struct omap_globals *); } \ }) +extern struct device *omap2_get_mpuss_device(void); +extern struct device *omap2_get_dsp_device(void); +extern struct device *omap2_get_l3_device(void); + #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ -- cgit v1.2.3-70-g09d2 From 90709ae91b7492ccf280252f612cd4215b725db9 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 26 Jul 2010 16:34:31 -0600 Subject: OMAP: hwmod data: add class for IVA hwmods MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a new hwmod class for IVA devices. To be used when hwmods are created for IVA2 on OMAP3. Signed-off-by: Kevin Hilman Cc: Benoît Cousson Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_common_data.c | 3 +++ arch/arm/mach-omap2/omap_hwmod_common_data.h | 1 + 2 files changed, 4 insertions(+) diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index 1e80b914fa1..08a134243ec 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -66,3 +66,6 @@ struct omap_hwmod_class mpu_hwmod_class = { .name = "mpu" }; +struct omap_hwmod_class iva_hwmod_class = { + .name = "iva" +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index 3645a28c7c2..c34e98bf124 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -20,5 +20,6 @@ extern struct omap_hwmod_class l3_hwmod_class; extern struct omap_hwmod_class l4_hwmod_class; extern struct omap_hwmod_class mpu_hwmod_class; +extern struct omap_hwmod_class iva_hwmod_class; #endif -- cgit v1.2.3-70-g09d2 From 4a7cf90a01a642969e61879337f6524dbdde05c2 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 26 Jul 2010 16:34:32 -0600 Subject: OMAP2&3: hwmod: Replace l3 -> l3_main Replace all the struct that contain l3 with l3_main in order to be consistent with the OMAP4 naming convention. Signed-off-by: Benoit Cousson Signed-off-by: Kevin Hilman Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 34 ++++++++++++------------ arch/arm/mach-omap2/omap_hwmod_2430_data.c | 34 ++++++++++++------------ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 42 +++++++++++++++--------------- 3 files changed, 55 insertions(+), 55 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 646386cf867..8c90b27db2e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -30,41 +30,41 @@ */ static struct omap_hwmod omap2420_mpu_hwmod; -static struct omap_hwmod omap2420_l3_hwmod; +static struct omap_hwmod omap2420_l3_main_hwmod; static struct omap_hwmod omap2420_l4_core_hwmod; /* L3 -> L4_CORE interface */ -static struct omap_hwmod_ocp_if omap2420_l3__l4_core = { - .master = &omap2420_l3_hwmod, +static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = { + .master = &omap2420_l3_main_hwmod, .slave = &omap2420_l4_core_hwmod, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* MPU -> L3 interface */ -static struct omap_hwmod_ocp_if omap2420_mpu__l3 = { +static struct omap_hwmod_ocp_if omap2420_mpu__l3_main = { .master = &omap2420_mpu_hwmod, - .slave = &omap2420_l3_hwmod, + .slave = &omap2420_l3_main_hwmod, .user = OCP_USER_MPU, }; /* Slave interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap2420_l3_slaves[] = { - &omap2420_mpu__l3, +static struct omap_hwmod_ocp_if *omap2420_l3_main_slaves[] = { + &omap2420_mpu__l3_main, }; /* Master interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap2420_l3_masters[] = { - &omap2420_l3__l4_core, +static struct omap_hwmod_ocp_if *omap2420_l3_main_masters[] = { + &omap2420_l3_main__l4_core, }; /* L3 */ -static struct omap_hwmod omap2420_l3_hwmod = { +static struct omap_hwmod omap2420_l3_main_hwmod = { .name = "l3_main", .class = &l3_hwmod_class, - .masters = omap2420_l3_masters, - .masters_cnt = ARRAY_SIZE(omap2420_l3_masters), - .slaves = omap2420_l3_slaves, - .slaves_cnt = ARRAY_SIZE(omap2420_l3_slaves), + .masters = omap2420_l3_main_masters, + .masters_cnt = ARRAY_SIZE(omap2420_l3_main_masters), + .slaves = omap2420_l3_main_slaves, + .slaves_cnt = ARRAY_SIZE(omap2420_l3_main_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), .flags = HWMOD_NO_IDLEST, }; @@ -80,7 +80,7 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = { /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = { - &omap2420_l3__l4_core, + &omap2420_l3_main__l4_core, }; /* Master interfaces on the L4_CORE interconnect */ @@ -123,7 +123,7 @@ static struct omap_hwmod omap2420_l4_wkup_hwmod = { /* Master interfaces on the MPU device */ static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = { - &omap2420_mpu__l3, + &omap2420_mpu__l3_main, }; /* MPU */ @@ -137,7 +137,7 @@ static struct omap_hwmod omap2420_mpu_hwmod = { }; static __initdata struct omap_hwmod *omap2420_hwmods[] = { - &omap2420_l3_hwmod, + &omap2420_l3_main_hwmod, &omap2420_l4_core_hwmod, &omap2420_l4_wkup_hwmod, &omap2420_mpu_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index b2100cfb317..c0f3311d5b5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -30,41 +30,41 @@ */ static struct omap_hwmod omap2430_mpu_hwmod; -static struct omap_hwmod omap2430_l3_hwmod; +static struct omap_hwmod omap2430_l3_main_hwmod; static struct omap_hwmod omap2430_l4_core_hwmod; /* L3 -> L4_CORE interface */ -static struct omap_hwmod_ocp_if omap2430_l3__l4_core = { - .master = &omap2430_l3_hwmod, +static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = { + .master = &omap2430_l3_main_hwmod, .slave = &omap2430_l4_core_hwmod, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* MPU -> L3 interface */ -static struct omap_hwmod_ocp_if omap2430_mpu__l3 = { +static struct omap_hwmod_ocp_if omap2430_mpu__l3_main = { .master = &omap2430_mpu_hwmod, - .slave = &omap2430_l3_hwmod, + .slave = &omap2430_l3_main_hwmod, .user = OCP_USER_MPU, }; /* Slave interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap2430_l3_slaves[] = { - &omap2430_mpu__l3, +static struct omap_hwmod_ocp_if *omap2430_l3_main_slaves[] = { + &omap2430_mpu__l3_main, }; /* Master interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap2430_l3_masters[] = { - &omap2430_l3__l4_core, +static struct omap_hwmod_ocp_if *omap2430_l3_main_masters[] = { + &omap2430_l3_main__l4_core, }; /* L3 */ -static struct omap_hwmod omap2430_l3_hwmod = { +static struct omap_hwmod omap2430_l3_main_hwmod = { .name = "l3_main", .class = &l3_hwmod_class, - .masters = omap2430_l3_masters, - .masters_cnt = ARRAY_SIZE(omap2430_l3_masters), - .slaves = omap2430_l3_slaves, - .slaves_cnt = ARRAY_SIZE(omap2430_l3_slaves), + .masters = omap2430_l3_main_masters, + .masters_cnt = ARRAY_SIZE(omap2430_l3_main_masters), + .slaves = omap2430_l3_main_slaves, + .slaves_cnt = ARRAY_SIZE(omap2430_l3_main_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), .flags = HWMOD_NO_IDLEST, }; @@ -82,7 +82,7 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = { /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = { - &omap2430_l3__l4_core, + &omap2430_l3_main__l4_core, }; /* Master interfaces on the L4_CORE interconnect */ @@ -125,7 +125,7 @@ static struct omap_hwmod omap2430_l4_wkup_hwmod = { /* Master interfaces on the MPU device */ static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = { - &omap2430_mpu__l3, + &omap2430_mpu__l3_main, }; /* MPU */ @@ -139,7 +139,7 @@ static struct omap_hwmod omap2430_mpu_hwmod = { }; static __initdata struct omap_hwmod *omap2430_hwmods[] = { - &omap2430_l3_hwmod, + &omap2430_l3_main_hwmod, &omap2430_l4_core_hwmod, &omap2430_l4_wkup_hwmod, &omap2430_mpu_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index ec6a5f8d94a..9d9cfb94b9e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -32,50 +32,50 @@ */ static struct omap_hwmod omap3xxx_mpu_hwmod; -static struct omap_hwmod omap3xxx_l3_hwmod; +static struct omap_hwmod omap3xxx_l3_main_hwmod; static struct omap_hwmod omap3xxx_l4_core_hwmod; static struct omap_hwmod omap3xxx_l4_per_hwmod; /* L3 -> L4_CORE interface */ -static struct omap_hwmod_ocp_if omap3xxx_l3__l4_core = { - .master = &omap3xxx_l3_hwmod, +static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = { + .master = &omap3xxx_l3_main_hwmod, .slave = &omap3xxx_l4_core_hwmod, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* L3 -> L4_PER interface */ -static struct omap_hwmod_ocp_if omap3xxx_l3__l4_per = { - .master = &omap3xxx_l3_hwmod, +static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = { + .master = &omap3xxx_l3_main_hwmod, .slave = &omap3xxx_l4_per_hwmod, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* MPU -> L3 interface */ -static struct omap_hwmod_ocp_if omap3xxx_mpu__l3 = { +static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = { .master = &omap3xxx_mpu_hwmod, - .slave = &omap3xxx_l3_hwmod, + .slave = &omap3xxx_l3_main_hwmod, .user = OCP_USER_MPU, }; /* Slave interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap3xxx_l3_slaves[] = { - &omap3xxx_mpu__l3, +static struct omap_hwmod_ocp_if *omap3xxx_l3_main_slaves[] = { + &omap3xxx_mpu__l3_main, }; /* Master interfaces on the L3 interconnect */ -static struct omap_hwmod_ocp_if *omap3xxx_l3_masters[] = { - &omap3xxx_l3__l4_core, - &omap3xxx_l3__l4_per, +static struct omap_hwmod_ocp_if *omap3xxx_l3_main_masters[] = { + &omap3xxx_l3_main__l4_core, + &omap3xxx_l3_main__l4_per, }; /* L3 */ -static struct omap_hwmod omap3xxx_l3_hwmod = { +static struct omap_hwmod omap3xxx_l3_main_hwmod = { .name = "l3_main", .class = &l3_hwmod_class, - .masters = omap3xxx_l3_masters, - .masters_cnt = ARRAY_SIZE(omap3xxx_l3_masters), - .slaves = omap3xxx_l3_slaves, - .slaves_cnt = ARRAY_SIZE(omap3xxx_l3_slaves), + .masters = omap3xxx_l3_main_masters, + .masters_cnt = ARRAY_SIZE(omap3xxx_l3_main_masters), + .slaves = omap3xxx_l3_main_slaves, + .slaves_cnt = ARRAY_SIZE(omap3xxx_l3_main_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), .flags = HWMOD_NO_IDLEST, }; @@ -91,7 +91,7 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { /* Slave interfaces on the L4_CORE interconnect */ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = { - &omap3xxx_l3__l4_core, + &omap3xxx_l3_main__l4_core, }; /* Master interfaces on the L4_CORE interconnect */ @@ -113,7 +113,7 @@ static struct omap_hwmod omap3xxx_l4_core_hwmod = { /* Slave interfaces on the L4_PER interconnect */ static struct omap_hwmod_ocp_if *omap3xxx_l4_per_slaves[] = { - &omap3xxx_l3__l4_per, + &omap3xxx_l3_main__l4_per, }; /* Master interfaces on the L4_PER interconnect */ @@ -155,7 +155,7 @@ static struct omap_hwmod omap3xxx_l4_wkup_hwmod = { /* Master interfaces on the MPU device */ static struct omap_hwmod_ocp_if *omap3xxx_mpu_masters[] = { - &omap3xxx_mpu__l3, + &omap3xxx_mpu__l3_main, }; /* MPU */ @@ -169,7 +169,7 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = { }; static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { - &omap3xxx_l3_hwmod, + &omap3xxx_l3_main_hwmod, &omap3xxx_l4_core_hwmod, &omap3xxx_l4_per_hwmod, &omap3xxx_l4_wkup_hwmod, -- cgit v1.2.3-70-g09d2 From 540064bfdb201c8b4abe248729673991246ebc72 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 26 Jul 2010 16:34:32 -0600 Subject: OMAP3: hwmod data: add data for OMAP3 IVA2 Add hwmod data for IVA2 module on OMAP3. Naming of "iva" instead of "iva2" to be aligned with OMAP4 naming done by Benoit Cousson. Cc: Benoit Cousson Signed-off-by: Kevin Hilman Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 9d9cfb94b9e..5d8eb58ba5e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -32,6 +32,7 @@ */ static struct omap_hwmod omap3xxx_mpu_hwmod; +static struct omap_hwmod omap3xxx_iva_hwmod; static struct omap_hwmod omap3xxx_l3_main_hwmod; static struct omap_hwmod omap3xxx_l4_core_hwmod; static struct omap_hwmod omap3xxx_l4_per_hwmod; @@ -168,12 +169,41 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; +/* + * IVA2_2 interface data + */ + +/* IVA2 <- L3 interface */ +static struct omap_hwmod_ocp_if omap3xxx_l3__iva = { + .master = &omap3xxx_l3_main_hwmod, + .slave = &omap3xxx_iva_hwmod, + .clk = "iva2_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap3xxx_iva_masters[] = { + &omap3xxx_l3__iva, +}; + +/* + * IVA2 (IVA2) + */ + +static struct omap_hwmod omap3xxx_iva_hwmod = { + .name = "iva", + .class = &iva_hwmod_class, + .masters = omap3xxx_iva_masters, + .masters_cnt = ARRAY_SIZE(omap3xxx_iva_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) +}; + static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_l3_main_hwmod, &omap3xxx_l4_core_hwmod, &omap3xxx_l4_per_hwmod, &omap3xxx_l4_wkup_hwmod, &omap3xxx_mpu_hwmod, + &omap3xxx_iva_hwmod, NULL, }; -- cgit v1.2.3-70-g09d2 From 08072acf3a23febd1b676f1d908c6c0b9ddf167c Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 26 Jul 2010 16:34:33 -0600 Subject: OMAP2: hwmod data: add IVA1 (2420), IVA2 (2430) hwmods MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add IVA1 hwmod data for OMAP2420 and IVA2 hwmod data for 2430. The data is based on Benoît Cousson's hwmod data for the OMAP3 IVA blocks. Signed-off-by: Paul Walmsley Cc: Benoît Cousson Cc: Kevin Hilman --- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 30 ++++++++++++++++++++++++++++ arch/arm/mach-omap2/omap_hwmod_2430_data.c | 32 ++++++++++++++++++++++++++++-- 2 files changed, 60 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 8c90b27db2e..3cc768e8bc0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -30,6 +30,7 @@ */ static struct omap_hwmod omap2420_mpu_hwmod; +static struct omap_hwmod omap2420_iva_hwmod; static struct omap_hwmod omap2420_l3_main_hwmod; static struct omap_hwmod omap2420_l4_core_hwmod; @@ -136,11 +137,40 @@ static struct omap_hwmod omap2420_mpu_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; +/* + * IVA1 interface data + */ + +/* IVA <- L3 interface */ +static struct omap_hwmod_ocp_if omap2420_l3__iva = { + .master = &omap2420_l3_main_hwmod, + .slave = &omap2420_iva_hwmod, + .clk = "iva1_ifck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap2420_iva_masters[] = { + &omap2420_l3__iva, +}; + +/* + * IVA2 (IVA2) + */ + +static struct omap_hwmod omap2420_iva_hwmod = { + .name = "iva", + .class = &iva_hwmod_class, + .masters = omap2420_iva_masters, + .masters_cnt = ARRAY_SIZE(omap2420_iva_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) +}; + static __initdata struct omap_hwmod *omap2420_hwmods[] = { &omap2420_l3_main_hwmod, &omap2420_l4_core_hwmod, &omap2420_l4_wkup_hwmod, &omap2420_mpu_hwmod, + &omap2420_iva_hwmod, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c0f3311d5b5..4526628ed28 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -30,6 +30,7 @@ */ static struct omap_hwmod omap2430_mpu_hwmod; +static struct omap_hwmod omap2430_iva_hwmod; static struct omap_hwmod omap2430_l3_main_hwmod; static struct omap_hwmod omap2430_l4_core_hwmod; @@ -70,8 +71,6 @@ static struct omap_hwmod omap2430_l3_main_hwmod = { }; static struct omap_hwmod omap2430_l4_wkup_hwmod; -static struct omap_hwmod omap2430_mmc1_hwmod; -static struct omap_hwmod omap2430_mmc2_hwmod; /* L4_CORE -> L4_WKUP interface */ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = { @@ -138,11 +137,40 @@ static struct omap_hwmod omap2430_mpu_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; +/* + * IVA2_1 interface data + */ + +/* IVA2 <- L3 interface */ +static struct omap_hwmod_ocp_if omap2430_l3__iva = { + .master = &omap2430_l3_main_hwmod, + .slave = &omap2430_iva_hwmod, + .clk = "dsp_fck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +static struct omap_hwmod_ocp_if *omap2430_iva_masters[] = { + &omap2430_l3__iva, +}; + +/* + * IVA2 (IVA2) + */ + +static struct omap_hwmod omap2430_iva_hwmod = { + .name = "iva", + .class = &iva_hwmod_class, + .masters = omap2430_iva_masters, + .masters_cnt = ARRAY_SIZE(omap2430_iva_masters), + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) +}; + static __initdata struct omap_hwmod *omap2430_hwmods[] = { &omap2430_l3_main_hwmod, &omap2430_l4_core_hwmod, &omap2430_l4_wkup_hwmod, &omap2430_mpu_hwmod, + &omap2430_iva_hwmod, NULL, }; -- cgit v1.2.3-70-g09d2 From db2a60bf2527209b42e6f512d5892089a835ceaa Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 26 Jul 2010 16:34:33 -0600 Subject: OMAP: hwmod/device: add omap_{device,hwmod}_get_mpu_rt_va Add omap_device_get_mpu_rt_va(). This is intended to be used by device drivers (currently, via a struct platform_data function pointer) to retrieve their corresponding device's virtual base address that the MPU should use to access the device. This is needed because the omap_hwmod code does its own ioremap(), in order to gain access to the module's OCP_SYSCONFIG register. Add omap_hwmod_get_mpu_rt_va(). omap_device_get_mpu_rt_va() calls this function to do the real work. While here, rename struct omap_hwmod._rt_va to struct omap_hwmod._mpu_rt_va, to reinforce that it refers to the MPU's register target virtual address base (as opposed to, for example, the L3's). In the future, this belongs as a function in an omap_bus, so it is not necessary to call this through a platform_data function pointer. The use-case for this function was originally presented by Santosh Shilimkar . Signed-off-by: Paul Walmsley Cc: Santosh Shilimkar --- arch/arm/mach-omap2/omap_hwmod.c | 33 +++++++++++++++++++++++---- arch/arm/plat-omap/include/plat/omap_device.h | 2 ++ arch/arm/plat-omap/include/plat/omap_hwmod.h | 7 +++--- arch/arm/plat-omap/omap_device.c | 19 +++++++++++++++ 4 files changed, 53 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index b2c8e8760c8..ec0be6d3223 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1,7 +1,7 @@ /* * omap_hwmod implementation for OMAP2/3/4 * - * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2009-2010 Nokia Corporation * * Paul Walmsley, Benoît Cousson, Kevin Hilman * @@ -1069,12 +1069,12 @@ static int _setup(struct omap_hwmod *oh, void *data) u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs) { - return __raw_readl(oh->_rt_va + reg_offs); + return __raw_readl(oh->_mpu_rt_va + reg_offs); } void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs) { - __raw_writel(v, oh->_rt_va + reg_offs); + __raw_writel(v, oh->_mpu_rt_va + reg_offs); } int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode) @@ -1131,7 +1131,7 @@ int omap_hwmod_register(struct omap_hwmod *oh) ms_id = _find_mpu_port_index(oh); if (!IS_ERR_VALUE(ms_id)) { oh->_mpu_port_index = ms_id; - oh->_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index); + oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index); } else { oh->_int_flags |= _HWMOD_NO_MPU_PORT; } @@ -1283,7 +1283,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: unregistering\n", oh->name); mutex_lock(&omap_hwmod_mutex); - iounmap(oh->_rt_va); + iounmap(oh->_mpu_rt_va); list_del(&oh->node); mutex_unlock(&omap_hwmod_mutex); @@ -1543,6 +1543,29 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh) } +/** + * omap_hwmod_get_mpu_rt_va - return the module's base address (for the MPU) + * @oh: struct omap_hwmod * + * + * Returns the virtual address corresponding to the beginning of the + * module's register target, in the address range that is intended to + * be used by the MPU. Returns the virtual address upon success or NULL + * upon error. + */ +void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh) +{ + if (!oh) + return NULL; + + if (oh->_int_flags & _HWMOD_NO_MPU_PORT) + return NULL; + + if (oh->_state == _HWMOD_STATE_UNKNOWN) + return NULL; + + return oh->_mpu_rt_va; +} + /** * omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh * @oh: struct omap_hwmod * diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 3694b622c4a..25cd9ac3b09 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -101,6 +101,8 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, int omap_device_register(struct omap_device *od); int omap_early_device_register(struct omap_device *od); +void __iomem *omap_device_get_rt_va(struct omap_device *od); + /* OMAP PM interface */ int omap_device_align_pm_lat(struct platform_device *pdev, u32 new_wakeup_lat_limit); diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index aebfacb3106..a4e508dfaba 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -1,7 +1,7 @@ /* * omap_hwmod macros, structures * - * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2009-2010 Nokia Corporation * Paul Walmsley * * Created in collaboration with (alphabetical order): Benoît Cousson, @@ -419,7 +419,7 @@ struct omap_hwmod_class { * @slaves: ptr to array of OCP ifs that this hwmod can respond on * @dev_attr: arbitrary device attributes that can be passed to the driver * @_sysc_cache: internal-use hwmod flags - * @_rt_va: cached register target start address (internal use) + * @_mpu_rt_va: cached register target start address (internal use) * @_mpu_port_index: cached MPU register target slave ID (internal use) * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6) * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift @@ -460,7 +460,7 @@ struct omap_hwmod { struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */ void *dev_attr; u32 _sysc_cache; - void __iomem *_rt_va; + void __iomem *_mpu_rt_va; struct list_head node; u16 flags; u8 _mpu_port_index; @@ -507,6 +507,7 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh); int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); +void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh); int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh); diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index f9dec0d32fa..dee4629b7b4 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -655,6 +655,25 @@ struct powerdomain *omap_device_get_pwrdm(struct omap_device *od) return omap_hwmod_get_pwrdm(od->hwmods[0]); } +/** + * omap_device_get_mpu_rt_va - return the MPU's virtual addr for the hwmod base + * @od: struct omap_device * + * + * Return the MPU's virtual address for the base of the hwmod, from + * the ioremap() that the hwmod code does. Only valid if there is one + * hwmod associated with this device. Returns NULL if there are zero + * or more than one hwmods associated with this omap_device; + * otherwise, passes along the return value from + * omap_hwmod_get_mpu_rt_va(). + */ +void __iomem *omap_device_get_rt_va(struct omap_device *od) +{ + if (od->hwmods_cnt != 1) + return NULL; + + return omap_hwmod_get_mpu_rt_va(od->hwmods[0]); +} + /* * Public functions intended for use in omap_device_pm_latency * .activate_func and .deactivate_func function pointers -- cgit v1.2.3-70-g09d2 From 887adeac28a3e354ebb3f9aeca6fc2296c105267 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 26 Jul 2010 16:34:33 -0600 Subject: OMAP2+: hwmod/device: update documentation and copyright MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Update some minor documentation issues and update copyright for omap_device/omap_hwmod code. Signed-off-by: Paul Walmsley Cc: Kevin Hilman Cc: Benoît Cousson --- arch/arm/mach-omap2/omap_hwmod.c | 17 ++++++++++++++++- arch/arm/plat-omap/omap_device.c | 9 ++++++--- 2 files changed, 22 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index ec0be6d3223..cb911d7d1a3 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -423,7 +423,7 @@ static int _init_main_clk(struct omap_hwmod *oh) } /** - * _init_interface_clk - get a struct clk * for the the hwmod's interface clks + * _init_interface_clks - get a struct clk * for the the hwmod's interface clks * @oh: struct omap_hwmod * * * Called from _init_clocks(). Populates the @oh OCP slave interface @@ -1077,6 +1077,21 @@ void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs) __raw_writel(v, oh->_mpu_rt_va + reg_offs); } +/** + * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode + * @oh: struct omap_hwmod * + * @idlemode: SIDLEMODE field bits (shifted to bit 0) + * + * Sets the IP block's OCP slave idlemode in hardware, and updates our + * local copy. Intended to be used by drivers that have some erratum + * that requires direct manipulation of the SIDLEMODE bits. Returns + * -EINVAL if @oh is null, or passes along the return value from + * _set_slave_idlemode(). + * + * XXX Does this function have any current users? If not, we should + * remove it; it is better to let the rest of the hwmod code handle this. + * Any users of this function should be scrutinized carefully. + */ int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode) { u32 v; diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index dee4629b7b4..ea0d659fcb1 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -1,7 +1,7 @@ /* * omap_device implementation * - * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2009-2010 Nokia Corporation * Paul Walmsley, Kevin Hilman * * Developed in collaboration with (alphabetical order): Benoit @@ -90,8 +90,11 @@ #define USE_WAKEUP_LAT 0 #define IGNORE_WAKEUP_LAT 1 - -#define OMAP_DEVICE_MAGIC 0xf00dcafe +/* + * OMAP_DEVICE_MAGIC: used to determine whether a struct omap_device + * obtained via container_of() is in fact a struct omap_device + */ +#define OMAP_DEVICE_MAGIC 0xf00dcafe /* Private functions */ -- cgit v1.2.3-70-g09d2 From 564889c1c02698d66db76764ee4e0a5e86903971 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 26 Jul 2010 16:34:34 -0600 Subject: OMAP: PM constraints: add return values; add requesting device param to omap_pm_set_max_dev_wakeup_lat() Add return values to the PM constraint functions. This allows the PM core to provide feedback to the caller if a constraint is not possible. Update the one upstream user of omap_pm_set_max_mpu_wakeup_lat() to add a compatibility wrapper, needed until the driver is changed. Update some of the documentation to conform more closely to kerneldoc style. Add an additional device parameter to omap_pm_set_max_dev_wakeup_lat() to identify the device requesting the constraint. This is so repeated calls to omap_pm_set_max_dev_wakeup_lat() with the same requesting device can override the device's previously-set constraint. Also, it allows the PM core to make a decision as to whether or not the constraint should be satisfied, based on the caller's identity. Signed-off-by: Paul Walmsley --- arch/arm/plat-omap/i2c.c | 12 +++++- arch/arm/plat-omap/include/plat/omap-pm.h | 69 +++++++++++++++++-------------- arch/arm/plat-omap/omap-pm-noop.c | 34 +++++++++------ 3 files changed, 71 insertions(+), 44 deletions(-) diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index eec2b4993c6..a5ce4f0aad3 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -138,6 +138,16 @@ static inline int omap1_i2c_add_bus(struct platform_device *pdev, int bus_id) return platform_device_register(pdev); } +/* + * XXX This function is a temporary compatibility wrapper - only + * needed until the I2C driver can be converted to call + * omap_pm_set_max_dev_wakeup_lat() and handle a return code. + */ +static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t) +{ + omap_pm_set_max_mpu_wakeup_lat(dev, t); +} + static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id) { struct resource *res; @@ -168,7 +178,7 @@ static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id) struct omap_i2c_bus_platform_data *pd; pd = pdev->dev.platform_data; - pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat; + pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat; } return platform_device_register(pdev); diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h index 3ee41d71149..3d468bafe91 100644 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ b/arch/arm/plat-omap/include/plat/omap-pm.h @@ -1,8 +1,8 @@ /* * omap-pm.h - OMAP power management interface * - * Copyright (C) 2008-2009 Texas Instruments, Inc. - * Copyright (C) 2008-2009 Nokia Corporation + * Copyright (C) 2008-2010 Texas Instruments, Inc. + * Copyright (C) 2008-2010 Nokia Corporation * Paul Walmsley * * Interface developed by (in alphabetical order): Karthik Dasu, Jouni @@ -89,7 +89,7 @@ void omap_pm_if_exit(void); * @t: maximum MPU wakeup latency in microseconds * * Request that the maximum interrupt latency for the MPU to be no - * greater than 't' microseconds. "Interrupt latency" in this case is + * greater than @t microseconds. "Interrupt latency" in this case is * defined as the elapsed time from the occurrence of a hardware or * timer interrupt to the time when the device driver's interrupt * service routine has been entered by the MPU. @@ -105,15 +105,19 @@ void omap_pm_if_exit(void); * elapsed from when a device driver enables a hardware device with * clk_enable(), to when the device is ready for register access or * other use. To control this device wakeup latency, use - * set_max_dev_wakeup_lat() + * omap_pm_set_max_dev_wakeup_lat() * - * Multiple calls to set_max_mpu_wakeup_lat() will replace the + * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the * previous t value. To remove the latency target for the MPU, call * with t = -1. * - * No return value. + * XXX This constraint will be deprecated soon in favor of the more + * general omap_pm_set_max_dev_wakeup_lat() + * + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); +int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); /** @@ -123,8 +127,8 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); * @r: minimum throughput (in KiB/s) * * Request that the minimum data throughput on the OCP interconnect - * attached to device 'dev' interconnect agent 'tbus_id' be no less - * than 'r' KiB/s. + * attached to device @dev interconnect agent @tbus_id be no less + * than @r KiB/s. * * It is expected that the OMAP PM or bus code will use this * information to set the interconnect clock to run at the lowest @@ -138,40 +142,44 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); * code will also need to add an minimum L3 interconnect speed * constraint, * - * Multiple calls to set_min_bus_tput() will replace the previous rate - * value for this device. To remove the interconnect throughput - * restriction for this device, call with r = 0. + * Multiple calls to omap_pm_set_min_bus_tput() will replace the + * previous rate value for this device. To remove the interconnect + * throughput restriction for this device, call with r = 0. * - * No return value. + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); +int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); /** * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency - * @dev: struct device * + * @req_dev: struct device * requesting the constraint, or NULL if none + * @dev: struct device * to set the constraint one * @t: maximum device wakeup latency in microseconds * - * Request that the maximum amount of time necessary for a device to - * become accessible after its clocks are enabled should be no greater - * than 't' microseconds. Specifically, this represents the time from - * when a device driver enables device clocks with clk_enable(), to - * when the register reads and writes on the device will succeed. - * This function should be called before clk_disable() is called, - * since the power state transition decision may be made during - * clk_disable(). + * Request that the maximum amount of time necessary for a device @dev + * to become accessible after its clocks are enabled should be no + * greater than @t microseconds. Specifically, this represents the + * time from when a device driver enables device clocks with + * clk_enable(), to when the register reads and writes on the device + * will succeed. This function should be called before clk_disable() + * is called, since the power state transition decision may be made + * during clk_disable(). * * It is intended that underlying PM code will use this information to * determine what power state to put the powerdomain enclosing this * device into. * - * Multiple calls to set_max_dev_wakeup_lat() will replace the - * previous wakeup latency values for this device. To remove the wakeup - * latency restriction for this device, call with t = -1. + * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the + * previous wakeup latency values for this device. To remove the + * wakeup latency restriction for this device, call with t = -1. * - * No return value. + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t); +int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, + long t); /** @@ -198,9 +206,10 @@ void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t); * value for this device. To remove the maximum DMA latency for this * device, call with t = -1. * - * No return value. + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. */ -void omap_pm_set_max_sdma_lat(struct device *dev, long t); +int omap_pm_set_max_sdma_lat(struct device *dev, long t); /* diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index 186bca82cfa..b0414f90c6e 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -34,11 +34,11 @@ struct omap_opp *l3_opps; * Device-driver-originated constraints (via board-*.c files) */ -void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) +int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) { if (!dev || t < -1) { - WARN_ON(1); - return; + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; }; if (t == -1) @@ -58,14 +58,16 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) * * TI CDP code can call constraint_set here. */ + + return 0; } -void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) +int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) { if (!dev || (agent_id != OCP_INITIATOR_AGENT && agent_id != OCP_TARGET_AGENT)) { - WARN_ON(1); - return; + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; }; if (r == 0) @@ -83,13 +85,16 @@ void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) * * TI CDP code can call constraint_set here on the VDD2 OPP. */ + + return 0; } -void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t) +int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, + long t) { - if (!dev || t < -1) { - WARN_ON(1); - return; + if (!req_dev || !dev || t < -1) { + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; }; if (t == -1) @@ -111,13 +116,15 @@ void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t) * * TI CDP code can call constraint_set here. */ + + return 0; } -void omap_pm_set_max_sdma_lat(struct device *dev, long t) +int omap_pm_set_max_sdma_lat(struct device *dev, long t) { if (!dev || t < -1) { - WARN_ON(1); - return; + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; }; if (t == -1) @@ -139,6 +146,7 @@ void omap_pm_set_max_sdma_lat(struct device *dev, long t) * TI CDP code can call constraint_set here. */ + return 0; } -- cgit v1.2.3-70-g09d2 From fb8ce14c7e16bd218decb3e1655c5d4ff08042f2 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 26 Jul 2010 16:34:34 -0600 Subject: OMAP: PM constraints: add omap_pm_set_min_clk_rate() Add omap_pm_set_min_clk_rate(). This constraint is meant for use by device drivers to translate a certain device-specific performance constraint (e.g., "minimum polygons per second") to a clock rate for the driver's device, given the driver's intimate knowledge of the device hardware (e.g., device type, device hardware revision, firmware revision, etc.) From a general PM core perspective, clock rate is probably the closest general analog to "performance" that is available, but the exact mapping from a use-case-specific performance constraint to clock rate must be done by the driver. Drivers intended for upstream merging shouldn't hardcode specific clock rates in their code without basing those rates on some performance criteria requested through the driver's subsystem (ideally, from userspace). Imre Deak described the need and use-case for this constraint, and discussed the implementation - thanks, Imre. Signed-off-by: Paul Walmsley Cc: Imre Deak --- arch/arm/plat-omap/include/plat/omap-pm.h | 61 +++++++++++++++++++++++++++++++ arch/arm/plat-omap/omap-pm-noop.c | 27 ++++++++++++++ 2 files changed, 88 insertions(+) diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h index 3d468bafe91..728fbb9dd54 100644 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ b/arch/arm/plat-omap/include/plat/omap-pm.h @@ -16,6 +16,7 @@ #include #include +#include #include "powerdomain.h" @@ -212,6 +213,66 @@ int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, int omap_pm_set_max_sdma_lat(struct device *dev, long t); +/** + * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev + * @dev: struct device * requesting the constraint + * @clk: struct clk * to set the minimum rate constraint on + * @r: minimum rate in Hz + * + * Request that the minimum clock rate on the device @dev's clk @clk + * be no less than @r Hz. + * + * It is expected that the OMAP PM code will use this information to + * find an OPP or clock setting that will satisfy this clock rate + * constraint, along with any other applicable system constraints on + * the clock rate or corresponding voltage, etc. + * + * omap_pm_set_min_clk_rate() differs from the clock code's + * clk_set_rate() in that it considers other constraints before taking + * any hardware action, and may change a system OPP rather than just a + * clock rate. clk_set_rate() is intended to be a low-level + * interface. + * + * omap_pm_set_min_clk_rate() is easily open to abuse. A better API + * would be something like "omap_pm_set_min_dev_performance()"; + * however, there is no easily-generalizable concept of performance + * that applies to all devices. Only a device (and possibly the + * device subsystem) has both the subsystem-specific knowledge, and + * the hardware IP block-specific knowledge, to translate a constraint + * on "touchscreen sampling accuracy" or "number of pixels or polygons + * rendered per second" to a clock rate. This translation can be + * dependent on the hardware IP block's revision, or firmware version, + * and the driver is the only code on the system that has this + * information and can know how to translate that into a clock rate. + * + * The intended use-case for this function is for userspace or other + * kernel code to communicate a particular performance requirement to + * a subsystem; then for the subsystem to communicate that requirement + * to something that is meaningful to the device driver; then for the + * device driver to convert that requirement to a clock rate, and to + * then call omap_pm_set_min_clk_rate(). + * + * Users of this function (such as device drivers) should not simply + * call this function with some high clock rate to ensure "high + * performance." Rather, the device driver should take a performance + * constraint from its subsystem, such as "render at least X polygons + * per second," and use some formula or table to convert that into a + * clock rate constraint given the hardware type and hardware + * revision. Device drivers or subsystems should not assume that they + * know how to make a power/performance tradeoff - some device use + * cases may tolerate a lower-fidelity device function for lower power + * consumption; others may demand a higher-fidelity device function, + * no matter what the power consumption. + * + * Multiple calls to omap_pm_set_min_clk_rate() will replace the + * previous rate value for the device @dev. To remove the minimum clock + * rate constraint for the device, call with r = 0. + * + * Returns -EINVAL for an invalid argument, -ERANGE if the constraint + * is not satisfiable, or 0 upon success. + */ +int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r); + /* * DSP Bridge-specific constraints */ diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index b0414f90c6e..e129ce80c53 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -149,6 +149,33 @@ int omap_pm_set_max_sdma_lat(struct device *dev, long t) return 0; } +int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r) +{ + if (!dev || !c || r < 0) { + WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); + return -EINVAL; + } + + if (r == 0) + pr_debug("OMAP PM: remove min clk rate constraint: " + "dev %s\n", dev_name(dev)); + else + pr_debug("OMAP PM: add min clk rate constraint: " + "dev %s, rate = %ld Hz\n", dev_name(dev), r); + + /* + * Code in a real implementation should keep track of these + * constraints on the clock, and determine the highest minimum + * clock rate. It should iterate over each OPP and determine + * whether the OPP will result in a clock rate that would + * satisfy this constraint (and any other PM constraint in effect + * at that time). Once it finds the lowest-voltage OPP that + * meets those conditions, it should switch to it, or return + * an error if the code is not capable of doing so. + */ + + return 0; +} /* * DSP Bridge-specific constraints -- cgit v1.2.3-70-g09d2