From 6a0bfff44e4aa4ee1721b3daa004d2039576c70d Mon Sep 17 00:00:00 2001 From: Tim Pepper Date: Mon, 27 Oct 2008 12:18:36 +0800 Subject: Blackfin arch: handle case of d_path() returning error in decode_address() d_path() can return an error. Most of its callers do something or other to make up something sane in that case. Do similar for blackfin's decode_address() call to d_path(). Signed-off-by: Tim Pepper Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 1aa2c788e22..0003616d02a 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -147,9 +147,12 @@ static void decode_address(char *buf, unsigned long address) char *name = p->comm; struct file *file = vma->vm_file; - if (file) - name = d_path(&file->f_path, _tmpbuf, + if (file) { + char *d_name = d_path(&file->f_path, _tmpbuf, sizeof(_tmpbuf)); + if (!IS_ERR(d_name)) + name = d_name; + } /* FLAT does not have its text aligned to the start of * the map while FDPIC ELF does ... -- cgit v1.2.3-70-g09d2 From 6776cf4476833df0f1e96bd9dba18c1ea4f582d5 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Mon, 27 Oct 2008 18:12:53 +0800 Subject: Blackfin arch: fix bug - Fail to boot jffs2 kernel for BF561 with SMP patch only if the cplb block overlapped with kernel area, this cplb need be locked Signed-off-by: Graf Yang Signed-off-by: Bryan Wu --- arch/blackfin/kernel/cplb-nompu/cplbinit.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 512f8c92ead..2debc900e24 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -188,10 +188,11 @@ static struct cplb_desc cplb_data[] = { static u16 __init lock_kernel_check(u32 start, u32 end) { - if ((end <= (u32) _end && end >= (u32)_stext) || - (start <= (u32) _end && start >= (u32)_stext)) - return IN_KERNEL; - return 0; + if (start >= (u32)_end || end <= (u32)_stext) + return 0; + + /* This cplb block overlapped with kernel area. */ + return IN_KERNEL; } static unsigned short __init -- cgit v1.2.3-70-g09d2 From 3b1f26a50a2bfbd2825345b49b1d7f78432a7a4c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 27 Oct 2008 18:21:43 +0800 Subject: Blackfin arch: don't copy bss when copying L1 when copying L1 regions, go to the start of bss rather than end since we have code to zero it out already Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/include/asm/bfin-global.h | 2 +- arch/blackfin/kernel/setup.c | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h index 56dcb0a2d24..77295666c34 100644 --- a/arch/blackfin/include/asm/bfin-global.h +++ b/arch/blackfin/include/asm/bfin-global.h @@ -101,7 +101,7 @@ extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */ extern unsigned long _ramstart, _ramend, _rambase; extern unsigned long memory_start, memory_end, physical_mem_end; extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[], - _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[], + _ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[], _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[], _ebss_l2[], _l2_lma_start[]; diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 7f35d1046cd..8337dc3a62d 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -119,23 +119,23 @@ void __init bfin_relocate_l1_mem(void) /* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */ dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length); - l1_data_a_length = _ebss_l1 - _sdata_l1; + l1_data_a_length = _sbss_l1 - _sdata_l1; if (l1_data_a_length > L1_DATA_A_LENGTH) panic("L1 Data SRAM Bank A Overflow\n"); - /* Copy _sdata_l1 to _ebss_l1 to L1 data bank A SRAM */ + /* Copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */ dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length); - l1_data_b_length = _ebss_b_l1 - _sdata_b_l1; + l1_data_b_length = _sbss_b_l1 - _sdata_b_l1; if (l1_data_b_length > L1_DATA_B_LENGTH) panic("L1 Data SRAM Bank B Overflow\n"); - /* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */ + /* Copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */ dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + l1_data_a_length, l1_data_b_length); if (L2_LENGTH != 0) { - l2_length = _ebss_l2 - _stext_l2; + l2_length = _sbss_l2 - _stext_l2; if (l2_length > L2_LENGTH) panic("L2 SRAM Overflow\n"); -- cgit v1.2.3-70-g09d2 From ba8b453de08c18cbc2453bcabfd0936c1d6695cb Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Fri, 24 Oct 2008 15:05:12 +0200 Subject: Change UTF8 chars in Kconfig help text about Oprofile AMD barcelona Fixes screwing up text output when doing a make oldconfig and viewing help text of "OProfile AMD IBS support". When the terminal is not using an UTF8 locale / LANG. "make config" breaks terminal output and its not possible to continue. (Change added by changeset 852402cc Tue Jul 22 21:09:06 2008) Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Robert Richter --- arch/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/Kconfig b/arch/Kconfig index e6ab550bceb..8977d99987c 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -21,7 +21,7 @@ config OPROFILE_IBS Instruction-Based Sampling (IBS) is a new profiling technique that provides rich, precise program performance information. IBS is introduced by AMD Family10h processors - (AMD Opteron Quad-Core processor “Barcelona”) to overcome + (AMD Opteron Quad-Core processor "Barcelona") to overcome the limitations of conventional performance counter sampling. -- cgit v1.2.3-70-g09d2 From fa448d6008cc81a3537e5db168fa0490e0caba68 Mon Sep 17 00:00:00 2001 From: Carl Love Date: Fri, 24 Oct 2008 11:47:29 -0700 Subject: Cell OProfile: Incorrect local array size in activate spu profiling function The size of the pm_signal_local array should be equal to the number of SPUs being configured in the call. Currently, the array is of size 4 (NR_PHYS_CTRS) but being indexed by a for loop from 0 to 7 (NUM_SPUS_PER_NODE). Signed-off-by: Carl Love Signed-off-by: Robert Richter --- arch/powerpc/oprofile/op_model_cell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 35141a8bc3d..6b2d974880b 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -830,7 +830,7 @@ static int calculate_lfsr(int n) static int pm_rtas_activate_spu_profiling(u32 node) { int ret, i; - struct pm_signal pm_signal_local[NR_PHYS_CTRS]; + struct pm_signal pm_signal_local[NUM_SPUS_PER_NODE]; /* * Set up the rtas call to configure the debug bus to -- cgit v1.2.3-70-g09d2 From cae042a73bb22fc4132b04ff94bd684456203089 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 23 Oct 2008 16:25:54 +0200 Subject: oprofile: fix memory ordering Regular bitops don't work as locks on all architectures. Also: can use non-atomic unlock as no concurrent stores to the word. Signed-off-by: Nick Piggin Signed-off-by: Robert Richter --- drivers/oprofile/event_buffer.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/oprofile/event_buffer.c b/drivers/oprofile/event_buffer.c index d962ba0dd87..191a3202cec 100644 --- a/drivers/oprofile/event_buffer.c +++ b/drivers/oprofile/event_buffer.c @@ -105,7 +105,7 @@ static int event_buffer_open(struct inode *inode, struct file *file) if (!capable(CAP_SYS_ADMIN)) return -EPERM; - if (test_and_set_bit(0, &buffer_opened)) + if (test_and_set_bit_lock(0, &buffer_opened)) return -EBUSY; /* Register as a user of dcookies @@ -129,7 +129,7 @@ static int event_buffer_open(struct inode *inode, struct file *file) fail: dcookie_unregister(file->private_data); out: - clear_bit(0, &buffer_opened); + __clear_bit_unlock(0, &buffer_opened); return err; } @@ -141,7 +141,7 @@ static int event_buffer_release(struct inode *inode, struct file *file) dcookie_unregister(file->private_data); buffer_pos = 0; atomic_set(&buffer_ready, 0); - clear_bit(0, &buffer_opened); + __clear_bit_unlock(0, &buffer_opened); return 0; } -- cgit v1.2.3-70-g09d2 From a8b56f296d7d977fea2512e353a131f8da490aa5 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Mon, 27 Oct 2008 15:31:25 -0700 Subject: IB/ipath: Fix RDMA write with immediate copy of last packet When the last packet of a RDMA write with immediate is received, the next receive work queue entry ID should be used to generate a completion entry. The code was incorrectly resetting part of the state used to copy the last packet. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_ruc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c index fc0f6d9e603..2296832f94d 100644 --- a/drivers/infiniband/hw/ipath/ipath_ruc.c +++ b/drivers/infiniband/hw/ipath/ipath_ruc.c @@ -156,7 +156,7 @@ bail: /** * ipath_get_rwqe - copy the next RWQE into the QP's RWQE * @qp: the QP - * @wr_id_only: update wr_id only, not SGEs + * @wr_id_only: update qp->r_wr_id only, not qp->r_sge * * Return 0 if no RWQE is available, otherwise return 1. * @@ -173,8 +173,6 @@ int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only) u32 tail; int ret; - qp->r_sge.sg_list = qp->r_sg_list; - if (qp->ibqp.srq) { srq = to_isrq(qp->ibqp.srq); handler = srq->ibsrq.event_handler; @@ -206,8 +204,10 @@ int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only) wqe = get_rwqe_ptr(rq, tail); if (++tail >= rq->size) tail = 0; - } while (!wr_id_only && !ipath_init_sge(qp, wqe, &qp->r_len, - &qp->r_sge)); + if (wr_id_only) + break; + qp->r_sge.sg_list = qp->r_sg_list; + } while (!ipath_init_sge(qp, wqe, &qp->r_len, &qp->r_sge)); qp->r_wr_id = wqe->wr_id; wq->tail = tail; -- cgit v1.2.3-70-g09d2 From 4ee1c45337e7b529eed644c6f62399d797dcbc10 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Tue, 28 Oct 2008 11:36:11 +0800 Subject: Blackfin arch: Fix typo when adding CONFIG_DEBUG_VERBOSE Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 0003616d02a..bef025b0744 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -59,7 +59,7 @@ #endif -#ifdef CONFIG_VERBOSE_DEBUG +#ifdef CONFIG_DEBUG_VERBOSE #define verbose_printk(fmt, arg...) \ printk(fmt, ##arg) #else @@ -574,7 +574,7 @@ asmlinkage void trap_c(struct pt_regs *fp) #endif panic("Kernel exception"); } else { -#ifdef CONFIG_VERBOSE_DEBUG +#ifdef CONFIG_DEBUG_VERBOSE unsigned long *stack; /* Dump the user space stack */ stack = (unsigned long *)rdusp(); -- cgit v1.2.3-70-g09d2 From 2830c9fb8e66cee70b8bffdfb0de01c144c7e643 Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Fri, 24 Oct 2008 11:00:35 -0700 Subject: i7300_idle: Kconfig, show menu only on x86_64 ...since today it contains only a single driver which is visible to just x86_64 Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- drivers/idle/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/idle/Kconfig b/drivers/idle/Kconfig index 108264de0ac..f15e90a453d 100644 --- a/drivers/idle/Kconfig +++ b/drivers/idle/Kconfig @@ -1,5 +1,6 @@ menu "Memory power savings" +depends on X86_64 config I7300_IDLE_IOAT_CHANNEL bool @@ -7,7 +8,7 @@ config I7300_IDLE_IOAT_CHANNEL config I7300_IDLE tristate "Intel chipset idle memory power saving driver" select I7300_IDLE_IOAT_CHANNEL - depends on X86_64 && EXPERIMENTAL + depends on EXPERIMENTAL help Enable memory power savings when idle with certain Intel server chipsets. The chipset must have I/O AT support, such as the -- cgit v1.2.3-70-g09d2 From 39e96c8835c36b6867b4e18698b06746972cdfcc Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 18 Nov 2008 17:48:22 +0800 Subject: Blackfin arch: fix bug - dmacopy test case fail on all platform The cache code I added flushes 1 line too little if the start address is not aligned to the cache size. Cache align the start address so that when we straddle cache aligns, we get the right count. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/cache.S | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index db532181fbd..d6780b49524 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -25,9 +25,13 @@ */ .macro do_flush flushins:req optflushins optnopins label + R2 = -L1_CACHE_BYTES; + + /* start = (start & -L1_CACHE_BYTES) */ + R0 = R0 & R2; + /* end = ((end - 1) & -L1_CACHE_BYTES) + L1_CACHE_BYTES; */ R1 += -1; - R2 = -L1_CACHE_BYTES; R1 = R1 & R2; R1 += L1_CACHE_BYTES; -- cgit v1.2.3-70-g09d2 From 7f6b2e7b1ff70bc60cedc9a00b01c1fad5c21371 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 28 Oct 2008 12:29:26 +0800 Subject: Blackfin arch: fix bug - kernel build with write back policy fails to be booted up Make sure IFLUSH is not the last instruction in the hardware loop to avoid infinite core stall. The dcache/icache function that only gets used in writeback mode was putting IFLUSH as the last instruction in the hardware loop ... we know from design that this may often lead to inifite core stalling, so switch the FLUSH/IFLUSH order. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/cache.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index d6780b49524..a028e945041 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -67,7 +67,7 @@ ENDPROC(_blackfin_icache_flush_range) /* Flush all cache lines assocoiated with this area of memory. */ ENTRY(_blackfin_icache_dcache_flush_range) - do_flush IFLUSH, FLUSH + do_flush FLUSH, IFLUSH ENDPROC(_blackfin_icache_dcache_flush_range) /* Throw away all D-cached data in specified region without any obligation to -- cgit v1.2.3-70-g09d2 From bd2b064ecd5504a9e9eeaa5742b9f8bcc6d27637 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 16 Oct 2008 17:29:10 -0400 Subject: sony-laptop: Ignore missing _DIS method on pic device At least the Vaio VGN-Z540N doesn't have this method, so let's not fail to suspend just because it doesn't exist. Signed-off-by: Adam Jackson Acked-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/misc/sony-laptop.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 5a97d3a9d74..f483c4221f7 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -2315,8 +2315,10 @@ end: */ static int sony_pic_disable(struct acpi_device *device) { - if (ACPI_FAILURE(acpi_evaluate_object(device->handle, - "_DIS", NULL, NULL))) + acpi_status ret = acpi_evaluate_object(device->handle, "_DIS", NULL, + NULL); + + if (ACPI_FAILURE(ret) && ret != AE_NOT_FOUND) return -ENXIO; dprintk("Device disabled\n"); -- cgit v1.2.3-70-g09d2 From b1b57fbe9bb10d94682a975456de7a727d1dbc84 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 27 Oct 2008 16:04:53 +0800 Subject: ACPI: fix de-reference bug in power resource driver change state to *state in the function of acpi_power_get_state() Signed-off-by: yakui.zhao@intel.com Signed-off-by: Len Brown --- drivers/acpi/power.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index a1718e56103..30d4a5282a2 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -153,7 +153,8 @@ static int acpi_power_get_state(acpi_handle handle, int *state) ACPI_POWER_RESOURCE_STATE_OFF; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] is %s\n", - acpi_ut_get_node_name(handle), state ? "on" : "off")); + acpi_ut_get_node_name(handle), + *state ? "on" : "off")); return 0; } -- cgit v1.2.3-70-g09d2 From 676962dac6e267ce7c13f73962208f9124a084bb Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Mon, 27 Oct 2008 16:05:39 +0800 Subject: ACPI: fan: Delete the strict check in power transition On some laptops the Fan device is turned on/off by controlling the corresponding power resource. For example: If the power resource defined in _PR0 object is turned off, it indicates that the FAN device is in off state(the ACPI state is in D3 state). Maybe the device is already in D3 state and expected to be transited to D3 state. As there is no _PR3 object, the power transition can't be finished and it will be switched to the Unknown state. Maybe it is more reasonable that the strick check in power transistion is deleted. http://bugzilla.kernel.org/show_bug.cgi?id=9485 Signed-off-by: yakui.zhao@intel.com Signed-off-by: Len Brown --- drivers/acpi/power.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 30d4a5282a2..89111cd28ed 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -517,11 +517,6 @@ int acpi_power_transition(struct acpi_device *device, int state) cl = &device->power.states[device->power.state].resources; tl = &device->power.states[state].resources; - if (!cl->count && !tl->count) { - result = -ENODEV; - goto end; - } - /* TBD: Resources must be ordered. */ /* -- cgit v1.2.3-70-g09d2 From ed206fac87d65917280b6c3edd3f01125d4095c9 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 27 Oct 2008 14:01:02 -0700 Subject: ACPI: bugfix reporting of event handler status Introduce a new flag showing whether the event has an event handler/method. For all the GPEs and Fixed Events, 1. ACPI_EVENT_FLAG_HANDLE is cleared, it's an "invalid" ACPI event. 2. Both ACPI_EVENT_FLAG_HANDLE and ACPI_EVENT_FLAG_DISABLE are set, it's "disabled". 3. Both ACPI_EVENT_FLAG_HANDLE and ACPI_EVENT_FLAG_ENABLE are set, it's "enabled". 4. Both ACPI_EVENT_FLAG_HANDLE and ACPI_EVENT_FLAG_WAKE_ENABLE are set, it's "wake_enabled". Among other things, this prevents incorrect reporting of ACPI events as being "invalid" when it's really just (temporarily) "disabled". Signed-off-by: Zhang Rui Signed-off-by: David Brownell Signed-off-by: Len Brown --- Documentation/ABI/testing/sysfs-firmware-acpi | 16 ++++++++-------- drivers/acpi/events/evxfevnt.c | 6 ++++++ drivers/acpi/system.c | 19 +++++++------------ include/acpi/actypes.h | 1 + 4 files changed, 22 insertions(+), 20 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi index f27be7d1a49..e8ffc70ffe1 100644 --- a/Documentation/ABI/testing/sysfs-firmware-acpi +++ b/Documentation/ABI/testing/sysfs-firmware-acpi @@ -89,7 +89,7 @@ Description: error - an interrupt that can't be accounted for above. - invalid: it's either a wakeup GPE or a GPE/Fixed Event that + invalid: it's either a GPE or a Fixed Event that doesn't have an event handler. disable: the GPE/Fixed Event is valid but disabled. @@ -117,30 +117,30 @@ Description: and other user space applications so that the machine won't shutdown when pressing the power button. # cat ff_pwr_btn - 0 + 0 enabled # press the power button for 3 times; # cat ff_pwr_btn - 3 + 3 enabled # echo disable > ff_pwr_btn # cat ff_pwr_btn - disable + 3 disabled # press the power button for 3 times; # cat ff_pwr_btn - disable + 3 disabled # echo enable > ff_pwr_btn # cat ff_pwr_btn - 4 + 4 enabled /* * this is because the status bit is set even if the enable bit is cleared, * and it triggers an ACPI fixed event when the enable bit is set again */ # press the power button for 3 times; # cat ff_pwr_btn - 7 + 7 enabled # echo disable > ff_pwr_btn # press the power button for 3 times; # echo clear > ff_pwr_btn /* clear the status bit */ # echo disable > ff_pwr_btn # cat ff_pwr_btn - 7 + 7 enabled diff --git a/drivers/acpi/events/evxfevnt.c b/drivers/acpi/events/evxfevnt.c index 73bfd6bf962..211e93a90e9 100644 --- a/drivers/acpi/events/evxfevnt.c +++ b/drivers/acpi/events/evxfevnt.c @@ -521,6 +521,9 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) if (value) *event_status |= ACPI_EVENT_FLAG_SET; + if (acpi_gbl_fixed_event_handlers[event].handler) + *event_status |= ACPI_EVENT_FLAG_HANDLE; + return_ACPI_STATUS(status); } @@ -571,6 +574,9 @@ acpi_get_gpe_status(acpi_handle gpe_device, status = acpi_hw_get_gpe_status(gpe_event_info, event_status); + if (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) + *event_status |= ACPI_EVENT_FLAG_HANDLE; + unlock_and_exit: if (flags & ACPI_NOT_ISR) { (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 1d74171b794..6d348dce081 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -167,7 +167,6 @@ static int acpi_system_sysfs_init(void) #define COUNT_ERROR 2 /* other */ #define NUM_COUNTERS_EXTRA 3 -#define ACPI_EVENT_VALID 0x01 struct event_counter { u32 count; u32 flags; @@ -312,12 +311,6 @@ static int get_status(u32 index, acpi_event_status *status, acpi_handle *handle) } else if (index < (num_gpes + ACPI_NUM_FIXED_EVENTS)) result = acpi_get_event_status(index - num_gpes, status); - /* - * sleep/power button GPE/Fixed Event is enabled after acpi_system_init, - * check the status at runtime and mark it as valid once it's enabled - */ - if (!result && (*status & ACPI_EVENT_FLAG_ENABLED)) - all_counters[index].flags |= ACPI_EVENT_VALID; end: return result; } @@ -346,12 +339,14 @@ static ssize_t counter_show(struct kobject *kobj, if (result) goto end; - if (!(all_counters[index].flags & ACPI_EVENT_VALID)) - size += sprintf(buf + size, " invalid"); + if (!(status & ACPI_EVENT_FLAG_HANDLE)) + size += sprintf(buf + size, " invalid"); else if (status & ACPI_EVENT_FLAG_ENABLED) - size += sprintf(buf + size, " enable"); + size += sprintf(buf + size, " enabled"); + else if (status & ACPI_EVENT_FLAG_WAKE_ENABLED) + size += sprintf(buf + size, " wake_enabled"); else - size += sprintf(buf + size, " disable"); + size += sprintf(buf + size, " disabled"); end: size += sprintf(buf + size, "\n"); @@ -385,7 +380,7 @@ static ssize_t counter_set(struct kobject *kobj, if (result) goto end; - if (!(all_counters[index].flags & ACPI_EVENT_VALID)) { + if (!(status & ACPI_EVENT_FLAG_HANDLE)) { printk(KERN_WARNING PREFIX "Can not change Invalid GPE/Fixed Event status\n"); return -EINVAL; diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index e8936ab5962..7220361790b 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -525,6 +525,7 @@ typedef u32 acpi_event_status; #define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01 #define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02 #define ACPI_EVENT_FLAG_SET (acpi_event_status) 0x04 +#define ACPI_EVENT_FLAG_HANDLE (acpi_event_status) 0x08 /* * General Purpose Events (GPE) -- cgit v1.2.3-70-g09d2 From da986b9ffff79224417b69cf43506192bd9c29dc Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 28 Oct 2008 13:58:15 +0800 Subject: Blackfin arch: dont warn when running a kernel on the oldest supported silicon Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 8337dc3a62d..71a9a8c53ce 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -827,7 +827,7 @@ void __init setup_arch(char **cmdline_p) printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n", bfin_compiled_revid(), bfin_revid()); } - if (bfin_revid() <= CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX) + if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX) printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n", CPU, bfin_revid()); } -- cgit v1.2.3-70-g09d2 From a10101d5ff9e34c0a1a526725474eef84409529a Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 28 Oct 2008 14:18:29 +0800 Subject: Blackfin arch: fix bug - Cpufreq assumes clocks in kHz and not Hz. Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/cpufreq.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c index c22c47b6012..dda5443b37e 100644 --- a/arch/blackfin/mach-common/cpufreq.c +++ b/arch/blackfin/mach-common/cpufreq.c @@ -72,13 +72,13 @@ unsigned int __bfin_cycles_mod; /**************************************************************************/ -static unsigned int bfin_getfreq(unsigned int cpu) +static unsigned int bfin_getfreq_khz(unsigned int cpu) { /* The driver only support single cpu */ if (cpu != 0) return -1; - return get_cclk(); + return get_cclk() / 1000; } @@ -96,7 +96,7 @@ static int bfin_target(struct cpufreq_policy *policy, cclk_hz = bfin_freq_table[index].frequency; - freqs.old = bfin_getfreq(0); + freqs.old = bfin_getfreq_khz(0); freqs.new = cclk_hz; freqs.cpu = 0; @@ -137,8 +137,8 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy) if (policy->cpu != 0) return -EINVAL; - cclk = get_cclk(); - sclk = get_sclk(); + cclk = get_cclk() / 1000; + sclk = get_sclk() / 1000; #if ANOMALY_05000273 || (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE)) min_cclk = sclk * 2; @@ -152,7 +152,7 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy) dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */ dpm_state_table[index].tscale = (TIME_SCALE / (1 << csel)) - 1; - pr_debug("cpufreq: freq:%d csel:%d tscale:%d\n", + pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n", bfin_freq_table[index].frequency, dpm_state_table[index].csel, dpm_state_table[index].tscale); @@ -173,7 +173,7 @@ static struct freq_attr *bfin_freq_attr[] = { static struct cpufreq_driver bfin_driver = { .verify = bfin_verify_speed, .target = bfin_target, - .get = bfin_getfreq, + .get = bfin_getfreq_khz, .init = __bfin_cpu_init, .name = "bfin cpufreq", .owner = THIS_MODULE, -- cgit v1.2.3-70-g09d2 From 72edff8dd45fdee6e1a2bc431baefd8a5372f7cb Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 28 Oct 2008 15:42:13 +0800 Subject: Blackfin arch: fix incorrect limit check for bf54x check_gpio Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/kernel/bfin_gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 6e08f425bb4..5c0800adb4d 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -218,7 +218,7 @@ inline int check_gpio(unsigned gpio) if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 || gpio == GPIO_PH14 || gpio == GPIO_PH15 || gpio == GPIO_PJ14 || gpio == GPIO_PJ15 - || gpio > MAX_BLACKFIN_GPIOS) + || gpio >= MAX_BLACKFIN_GPIOS) return -EINVAL; return 0; } -- cgit v1.2.3-70-g09d2 From b2c2f30388c682520ae2d07c8852b4225dd4a4d7 Mon Sep 17 00:00:00 2001 From: Jie Zhang Date: Tue, 28 Oct 2008 15:57:49 +0800 Subject: Blackfin arch: fix bug - shared lib function in L2 failed be called Allow user space to access L2 SRAM. Signed-off-by: Jie Zhang Signed-off-by: Bryan Wu --- arch/blackfin/kernel/process.c | 7 ++++++- arch/blackfin/mm/sram-alloc.c | 8 ++++---- 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 77800dd83e5..0c3ea118b65 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -351,9 +351,14 @@ int _access_ok(unsigned long addr, unsigned long size) return 1; #endif #if L1_DATA_B_LENGTH != 0 - if (addr >= L1_DATA_B_START + if (addr >= L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1) && addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH) return 1; +#endif +#if L2_LENGTH != 0 + if (addr >= L2_START + (_ebss_l2 - _stext_l2) + && addr + size <= L2_START + L2_LENGTH) + return 1; #endif return 0; } diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c index 0f1ca6930c1..cc6f336e731 100644 --- a/arch/blackfin/mm/sram-alloc.c +++ b/arch/blackfin/mm/sram-alloc.c @@ -183,10 +183,10 @@ static void __init l2_sram_init(void) return; } - free_l2_sram_head.next->paddr = (void *)L2_START + - (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2); - free_l2_sram_head.next->size = L2_LENGTH - - (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2); + free_l2_sram_head.next->paddr = + (void *)L2_START + (_ebss_l2 - _stext_l2); + free_l2_sram_head.next->size = + L2_LENGTH - (_ebss_l2 - _stext_l2); free_l2_sram_head.next->pid = 0; free_l2_sram_head.next->next = NULL; -- cgit v1.2.3-70-g09d2 From 22cffe494b6b5773b44fe8bb8f41b471c1734b53 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Fri, 31 Oct 2008 16:09:47 +0100 Subject: Revert "Cell OProfile: Incorrect local array size in activate spu profiling function" This reverts commit fa448d6008cc81a3537e5db168fa0490e0caba68. --- arch/powerpc/oprofile/op_model_cell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 6b2d974880b..35141a8bc3d 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -830,7 +830,7 @@ static int calculate_lfsr(int n) static int pm_rtas_activate_spu_profiling(u32 node) { int ret, i; - struct pm_signal pm_signal_local[NUM_SPUS_PER_NODE]; + struct pm_signal pm_signal_local[NR_PHYS_CTRS]; /* * Set up the rtas call to configure the debug bus to -- cgit v1.2.3-70-g09d2 From 99219b4f3e0772a11fc0d98213b00e89fee7b049 Mon Sep 17 00:00:00 2001 From: Carl Love Date: Wed, 29 Oct 2008 08:06:45 -0700 Subject: Cell OProfile: Incorrect local array size in activate spu profiling function Updated the patch to address comments by Michael Ellerman. Specifically, changed upper limit in for loop to ARRAY_SIZE() macro and added a check to make sure the number of events specified by the user, which is used as the max for indexing various arrays, is no bigger then the declared size of the arrays. The size of the pm_signal_local array should be equal to the number of SPUs being configured in the array. Currently, the array is of size 4 (NR_PHYS_CTRS) but being indexed by a for loop from 0 to 7 (NUM_SPUS_PER_NODE). Signed-off-by: Carl Love --- arch/powerpc/oprofile/op_model_cell.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 35141a8bc3d..25a4ec2514a 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -582,6 +582,13 @@ static int cell_reg_setup(struct op_counter_config *ctr, num_counters = num_ctrs; + if (unlikely(num_ctrs > NR_PHYS_CTRS)) { + printk(KERN_ERR + "%s: Oprofile, number of specified events " \ + "exceeds number of physical counters\n", + __func__); + return -EIO; + } pm_regs.group_control = 0; pm_regs.debug_bus_control = 0; @@ -830,13 +837,13 @@ static int calculate_lfsr(int n) static int pm_rtas_activate_spu_profiling(u32 node) { int ret, i; - struct pm_signal pm_signal_local[NR_PHYS_CTRS]; + struct pm_signal pm_signal_local[NUM_SPUS_PER_NODE]; /* * Set up the rtas call to configure the debug bus to * route the SPU PCs. Setup the pm_signal for each SPU */ - for (i = 0; i < NUM_SPUS_PER_NODE; i++) { + for (i = 0; i < ARRAY_SIZE(pm_signal_local); i++) { pm_signal_local[i].cpu = node; pm_signal_local[i].signal_group = 41; /* spu i on word (i/2) */ @@ -848,7 +855,7 @@ static int pm_rtas_activate_spu_profiling(u32 node) ret = rtas_ibm_cbe_perftools(SUBFUNC_ACTIVATE, PASSTHRU_ENABLE, pm_signal_local, - (NUM_SPUS_PER_NODE + (ARRAY_SIZE(pm_signal_local) * sizeof(struct pm_signal))); if (unlikely(ret)) { -- cgit v1.2.3-70-g09d2 From af2b0a1ec37c61513d83d2d123658b4ef69d2ce9 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Sat, 1 Nov 2008 12:55:37 -0700 Subject: RDMA/cxgb3: Fix too-big reserved field zeroing in iwch_post_zb_read() The array wqe->read.reserved has only two entries, but iwch_post_zb_read() sets [0], [1], and [2], which is one too many. This is harmless since it runs into the next field, rem_stag, which is initialized correctly immediately after, but we might as well get things right, especially since it makes the code smaller. This was spotted by the Coverity checker (CID 2475). Signed-off-by: Roland Dreier Acked-by: Steve Wise --- drivers/infiniband/hw/cxgb3/iwch_qp.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 3e4585c2318..19661b2f040 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -745,7 +745,6 @@ int iwch_post_zb_read(struct iwch_qp *qhp) wqe->read.rdmaop = T3_READ_REQ; wqe->read.reserved[0] = 0; wqe->read.reserved[1] = 0; - wqe->read.reserved[2] = 0; wqe->read.rem_stag = cpu_to_be32(1); wqe->read.rem_to = cpu_to_be64(1); wqe->read.local_stag = cpu_to_be32(1); -- cgit v1.2.3-70-g09d2 From 60df3de8b1f5ce085049e9e3c83d96643c426158 Mon Sep 17 00:00:00 2001 From: Ilpo Järvinen Date: Thu, 30 Oct 2008 13:02:54 +0200 Subject: pcmcia: fix indentation & braces disagreement - add braces MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Broken by d8b0a49da4f2 (pcmcia: deprecate CS_BAD_VCC and CS_BAD_VPP). Signed-off-by: Ilpo Järvinen Signed-off-by: Dominik Brodowski --- drivers/pcmcia/pcmcia_resource.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 76d4a98f095..f5d0ba8e22d 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -302,9 +302,10 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev, /* We only allow changing Vpp1 and Vpp2 to the same value */ if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) && (mod->Attributes & CONF_VPP2_CHANGE_VALID)) { - if (mod->Vpp1 != mod->Vpp2) + if (mod->Vpp1 != mod->Vpp2) { ds_dbg(s, 0, "Vpp1 and Vpp2 must be the same\n"); return -EINVAL; + } s->socket.Vpp = mod->Vpp1; if (s->ops->set_socket(s, &s->socket)) { dev_printk(KERN_WARNING, &s->dev, -- cgit v1.2.3-70-g09d2 From 3e879f61434632ca099804713099f8f1627f929e Mon Sep 17 00:00:00 2001 From: Komuro Date: Sun, 2 Nov 2008 19:33:24 +0900 Subject: pcmcia: setup resource information for pseudo multifunction devices. Setup "io" and "irq" for pseudo multifunction devices. Signed-off-by: Komuro Signed-off-by: Dominik Brodowski --- drivers/pcmcia/ds.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 79566025549..00eee1435dc 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -668,6 +668,8 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f list_for_each_entry(tmp_dev, &s->devices_list, socket_device_list) if (p_dev->func == tmp_dev->func) { p_dev->function_config = tmp_dev->function_config; + p_dev->io = tmp_dev->io; + p_dev->irq = tmp_dev->irq; kref_get(&p_dev->function_config->ref); } -- cgit v1.2.3-70-g09d2 From 2509698687e2d8265a19d800f7daa6f87790a529 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Sat, 1 Nov 2008 11:46:06 +0100 Subject: pcmcia: struct device - replace bus_id with dev_name(), dev_set_name() Signed-Off-By: Kay Sievers Acked-by: Greg Kroah-Hartman Signed-off-by: Dominik Brodowski --- drivers/pcmcia/cs.c | 2 +- drivers/pcmcia/ds.c | 9 ++++----- drivers/pcmcia/rsrc_nonstatic.c | 6 +++--- 3 files changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index c68c5d33828..5d0e60e09d3 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -226,7 +226,7 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) /* set proper values in socket->dev */ dev_set_drvdata(&socket->dev, socket); socket->dev.class = &pcmcia_socket_class; - snprintf(socket->dev.bus_id, BUS_ID_SIZE, "pcmcia_socket%u", socket->sock); + dev_set_name(&socket->dev, "pcmcia_socket%u", socket->sock); /* base address = 0, map = 0 */ socket->cis_mem.flags = 0; diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 00eee1435dc..47cab31ff6e 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -622,7 +622,6 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f { struct pcmcia_device *p_dev, *tmp_dev; unsigned long flags; - int bus_id_len; s = pcmcia_get_socket(s); if (!s) @@ -650,12 +649,12 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f /* by default don't allow DMA */ p_dev->dma_mask = DMA_MASK_NONE; p_dev->dev.dma_mask = &p_dev->dma_mask; - bus_id_len = sprintf (p_dev->dev.bus_id, "%d.%d", p_dev->socket->sock, p_dev->device_no); - - p_dev->devname = kmalloc(6 + bus_id_len + 1, GFP_KERNEL); + dev_set_name(&p_dev->dev, "%d.%d", p_dev->socket->sock, p_dev->device_no); + if (!dev_name(&p_dev->dev)) + goto err_free; + p_dev->devname = kasprintf(GFP_KERNEL, "pcmcia%s", dev_name(&p_dev->dev)); if (!p_dev->devname) goto err_free; - sprintf (p_dev->devname, "pcmcia%s", p_dev->dev.bus_id); ds_dev_dbg(3, &p_dev->dev, "devname is %s\n", p_dev->devname); spin_lock_irqsave(&pcmcia_dev_list_lock, flags); diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 17f4ecf1c0c..9ca22c7aafb 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -71,7 +71,7 @@ static DEFINE_MUTEX(rsrc_mutex); ======================================================================*/ static struct resource * -make_resource(resource_size_t b, resource_size_t n, int flags, char *name) +make_resource(resource_size_t b, resource_size_t n, int flags, const char *name) { struct resource *res = kzalloc(sizeof(*res), GFP_KERNEL); @@ -624,7 +624,7 @@ static int nonstatic_adjust_io_region(struct resource *res, unsigned long r_star static struct resource *nonstatic_find_io_region(unsigned long base, int num, unsigned long align, struct pcmcia_socket *s) { - struct resource *res = make_resource(0, num, IORESOURCE_IO, s->dev.bus_id); + struct resource *res = make_resource(0, num, IORESOURCE_IO, dev_name(&s->dev)); struct socket_data *s_data = s->resource_data; struct pcmcia_align_data data; unsigned long min = base; @@ -658,7 +658,7 @@ static struct resource *nonstatic_find_io_region(unsigned long base, int num, static struct resource * nonstatic_find_mem_region(u_long base, u_long num, u_long align, int low, struct pcmcia_socket *s) { - struct resource *res = make_resource(0, num, IORESOURCE_MEM, s->dev.bus_id); + struct resource *res = make_resource(0, num, IORESOURCE_MEM, dev_name(&s->dev)); struct socket_data *s_data = s->resource_data; struct pcmcia_align_data data; unsigned long min, max; -- cgit v1.2.3-70-g09d2 From e689597fe890cf22e23195037aa668c39b25ae4b Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 2 Nov 2008 19:55:45 +0100 Subject: pcmcia: add braces in error path Signed-off-by: Dominik Brodowski --- drivers/pcmcia/cistpl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index dcce9f5d846..4a110b7b267 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -351,10 +351,11 @@ int verify_cis_cache(struct pcmcia_socket *s) char *buf; buf = kmalloc(256, GFP_KERNEL); - if (buf == NULL) + if (buf == NULL) { dev_printk(KERN_WARNING, &s->dev, "no memory for verifying CIS\n"); return -ENOMEM; + } list_for_each_entry(cis, &s->cis_cache, node) { int len = cis->len; -- cgit v1.2.3-70-g09d2 From e219cca082f52e7dfea41f3be264b7b5eb204227 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 6 Nov 2008 22:37:59 -0500 Subject: jbd: don't give up looking for space so easily in __log_wait_for_space Commit be07c4ed introducd a regression because it assumed that if there were no transactions ready to be checkpointed, that no progress could be made on making space available in the journal, and so the journal should be aborted. This assumption is false; it could be the case that simply calling cleanup_journal_tail() will recover the necessary space, or, for small journals, the currently committing transaction could be responsible for chewing up the required space in the log, so we need to wait for the currently committing transaction to finish before trying to force a checkpoint operation. This patch fixes the bug reported by Meelis Roos at: http://bugzilla.kernel.org/show_bug.cgi?id=11937 Signed-off-by: "Theodore Ts'o" Cc: Duane Griffin Cc: Toshiyuki Okajima --- fs/jbd/checkpoint.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-) diff --git a/fs/jbd/checkpoint.c b/fs/jbd/checkpoint.c index 1bd8d4acc6f..61f32f3868c 100644 --- a/fs/jbd/checkpoint.c +++ b/fs/jbd/checkpoint.c @@ -115,7 +115,7 @@ static int __try_to_free_cp_buf(struct journal_head *jh) */ void __log_wait_for_space(journal_t *journal) { - int nblocks; + int nblocks, space_left; assert_spin_locked(&journal->j_state_lock); nblocks = jbd_space_needed(journal); @@ -128,25 +128,42 @@ void __log_wait_for_space(journal_t *journal) /* * Test again, another process may have checkpointed while we * were waiting for the checkpoint lock. If there are no - * outstanding transactions there is nothing to checkpoint and - * we can't make progress. Abort the journal in this case. + * transactions ready to be checkpointed, try to recover + * journal space by calling cleanup_journal_tail(), and if + * that doesn't work, by waiting for the currently committing + * transaction to complete. If there is absolutely no way + * to make progress, this is either a BUG or corrupted + * filesystem, so abort the journal and leave a stack + * trace for forensic evidence. */ spin_lock(&journal->j_state_lock); spin_lock(&journal->j_list_lock); nblocks = jbd_space_needed(journal); - if (__log_space_left(journal) < nblocks) { + space_left = __log_space_left(journal); + if (space_left < nblocks) { int chkpt = journal->j_checkpoint_transactions != NULL; + tid_t tid = 0; + if (journal->j_committing_transaction) + tid = journal->j_committing_transaction->t_tid; spin_unlock(&journal->j_list_lock); spin_unlock(&journal->j_state_lock); if (chkpt) { log_do_checkpoint(journal); + } else if (cleanup_journal_tail(journal) == 0) { + /* We were able to recover space; yay! */ + ; + } else if (tid) { + log_wait_commit(journal, tid); } else { - printk(KERN_ERR "%s: no transactions\n", - __func__); + printk(KERN_ERR "%s: needed %d blocks and " + "only had %d space available\n", + __func__, nblocks, space_left); + printk(KERN_ERR "%s: no way to get more " + "journal space\n", __func__); + WARN_ON(1); journal_abort(journal, 0); } - spin_lock(&journal->j_state_lock); } else { spin_unlock(&journal->j_list_lock); -- cgit v1.2.3-70-g09d2 From 8c3f25d8950c3e9fe6c9849f88679b3f2a071550 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 6 Nov 2008 22:38:07 -0500 Subject: jbd2: don't give up looking for space so easily in __jbd2_log_wait_for_space MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 23f8b79e introducd a regression because it assumed that if there were no transactions ready to be checkpointed, that no progress could be made on making space available in the journal, and so the journal should be aborted. This assumption is false; it could be the case that simply calling jbd2_cleanup_journal_tail() will recover the necessary space, or, for small journals, the currently committing transaction could be responsible for chewing up the required space in the log, so we need to wait for the currently committing transaction to finish before trying to force a checkpoint operation. This patch fixes a bug reported by Mihai Harpau at: https://bugzilla.redhat.com/show_bug.cgi?id=469582 This patch fixes a bug reported by François Valenduc at: http://bugzilla.kernel.org/show_bug.cgi?id=11840 Signed-off-by: "Theodore Ts'o" Cc: Duane Griffin Cc: Toshiyuki Okajima --- fs/jbd2/checkpoint.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index 9203c3332f1..9497718fe92 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -116,7 +116,7 @@ static int __try_to_free_cp_buf(struct journal_head *jh) */ void __jbd2_log_wait_for_space(journal_t *journal) { - int nblocks; + int nblocks, space_left; assert_spin_locked(&journal->j_state_lock); nblocks = jbd_space_needed(journal); @@ -129,25 +129,43 @@ void __jbd2_log_wait_for_space(journal_t *journal) /* * Test again, another process may have checkpointed while we * were waiting for the checkpoint lock. If there are no - * outstanding transactions there is nothing to checkpoint and - * we can't make progress. Abort the journal in this case. + * transactions ready to be checkpointed, try to recover + * journal space by calling cleanup_journal_tail(), and if + * that doesn't work, by waiting for the currently committing + * transaction to complete. If there is absolutely no way + * to make progress, this is either a BUG or corrupted + * filesystem, so abort the journal and leave a stack + * trace for forensic evidence. */ spin_lock(&journal->j_state_lock); spin_lock(&journal->j_list_lock); nblocks = jbd_space_needed(journal); - if (__jbd2_log_space_left(journal) < nblocks) { + space_left = __jbd2_log_space_left(journal); + if (space_left < nblocks) { int chkpt = journal->j_checkpoint_transactions != NULL; + tid_t tid = 0; + if (journal->j_committing_transaction) + tid = journal->j_committing_transaction->t_tid; spin_unlock(&journal->j_list_lock); spin_unlock(&journal->j_state_lock); if (chkpt) { jbd2_log_do_checkpoint(journal); + } else if (jbd2_cleanup_journal_tail(journal) == 0) { + /* We were able to recover space; yay! */ + ; + } else if (tid) { + jbd2_log_wait_commit(journal, tid); } else { - printk(KERN_ERR "%s: no transactions\n", - __func__); + printk(KERN_ERR "%s: needed %d blocks and " + "only had %d space available\n", + __func__, nblocks, space_left); + printk(KERN_ERR "%s: no way to get more " + "journal space in %s\n", __func__, + journal->j_devname); + WARN_ON(1); jbd2_journal_abort(journal, 0); } - spin_lock(&journal->j_state_lock); } else { spin_unlock(&journal->j_list_lock); -- cgit v1.2.3-70-g09d2 From 2423840ded13e6d3b52d88aff8d033bb78fafd08 Mon Sep 17 00:00:00 2001 From: Sami Liedes Date: Sun, 2 Nov 2008 19:23:30 -0500 Subject: jbd2: deregister proc on failure in jbd2_journal_init_inode jbd2_journal_init_inode() does not call jbd2_stats_proc_exit() on all failure paths after calling jbd2_stats_proc_init(). This leaves dangling references to the fs in proc. This patch fixes a bug reported by Sami Leides at: http://bugzilla.kernel.org/show_bug.cgi?id=11493 Signed-off-by: Sami Liedes Signed-off-by: "Theodore Ts'o" --- fs/jbd2/journal.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 783de118de9..e70d657a19f 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -1089,6 +1089,7 @@ journal_t * jbd2_journal_init_inode (struct inode *inode) if (!journal->j_wbuf) { printk(KERN_ERR "%s: Cant allocate bhs for commit thread\n", __func__); + jbd2_stats_proc_exit(journal); kfree(journal); return NULL; } @@ -1098,6 +1099,7 @@ journal_t * jbd2_journal_init_inode (struct inode *inode) if (err) { printk(KERN_ERR "%s: Cannnot locate journal superblock\n", __func__); + jbd2_stats_proc_exit(journal); kfree(journal); return NULL; } -- cgit v1.2.3-70-g09d2 From 5880ff19fa29466cb9d7e293710e6aebecfecdd1 Mon Sep 17 00:00:00 2001 From: Ilpo Järvinen Date: Thu, 30 Oct 2008 13:39:43 +0200 Subject: RDMA/nes: Reindent mis-indented spinlocks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ilpo Järvinen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_verbs.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 932e56fcf77..ffdd141efe3 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -220,14 +220,14 @@ static int nes_bind_mw(struct ib_qp *ibqp, struct ib_mw *ibmw, if (nesqp->ibqp_state > IB_QPS_RTS) return -EINVAL; - spin_lock_irqsave(&nesqp->lock, flags); + spin_lock_irqsave(&nesqp->lock, flags); head = nesqp->hwqp.sq_head; qsize = nesqp->hwqp.sq_tail; /* Check for SQ overflow */ if (((head + (2 * qsize) - nesqp->hwqp.sq_tail) % qsize) == (qsize - 1)) { - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); return -EINVAL; } @@ -269,7 +269,7 @@ static int nes_bind_mw(struct ib_qp *ibqp, struct ib_mw *ibmw, nes_write32(nesdev->regs+NES_WQE_ALLOC, (1 << 24) | 0x00800000 | nesqp->hwqp.qp_id); - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); return 0; } @@ -3212,7 +3212,7 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr, if (nesqp->ibqp_state > IB_QPS_RTS) return -EINVAL; - spin_lock_irqsave(&nesqp->lock, flags); + spin_lock_irqsave(&nesqp->lock, flags); head = nesqp->hwqp.sq_head; @@ -3337,7 +3337,7 @@ static int nes_post_send(struct ib_qp *ibqp, struct ib_send_wr *ib_wr, (counter << 24) | 0x00800000 | nesqp->hwqp.qp_id); } - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); if (err) *bad_wr = ib_wr; @@ -3368,7 +3368,7 @@ static int nes_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *ib_wr, if (nesqp->ibqp_state > IB_QPS_RTS) return -EINVAL; - spin_lock_irqsave(&nesqp->lock, flags); + spin_lock_irqsave(&nesqp->lock, flags); head = nesqp->hwqp.rq_head; @@ -3421,7 +3421,7 @@ static int nes_post_recv(struct ib_qp *ibqp, struct ib_recv_wr *ib_wr, nes_write32(nesdev->regs+NES_WQE_ALLOC, (counter<<24) | nesqp->hwqp.qp_id); } - spin_unlock_irqrestore(&nesqp->lock, flags); + spin_unlock_irqrestore(&nesqp->lock, flags); if (err) *bad_wr = ib_wr; @@ -3453,7 +3453,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry) nes_debug(NES_DBG_CQ, "\n"); - spin_lock_irqsave(&nescq->lock, flags); + spin_lock_irqsave(&nescq->lock, flags); head = nescq->hw_cq.cq_head; cq_size = nescq->hw_cq.cq_size; @@ -3562,7 +3562,7 @@ static int nes_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *entry) nes_debug(NES_DBG_CQ, "Reporting %u completions for CQ%u.\n", cqe_count, nescq->hw_cq.cq_number); - spin_unlock_irqrestore(&nescq->lock, flags); + spin_unlock_irqrestore(&nescq->lock, flags); return cqe_count; } -- cgit v1.2.3-70-g09d2 From 35c6d6942c966e6d74ea801d8b5007d7f900ce92 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Sun, 2 Nov 2008 21:37:35 -0800 Subject: RDMA/nes: Correct handling of PBL resources * Roll back allocated structures on failures. * Use GFP_ATOMIC instead of GFP_KERNEL since we are holding a lock. * Acquire nesadapter->pbl_lock when modifying PBL counters. * Decrement PBL counters on deallocation. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_verbs.c | 44 ++++++++++++++++++++++++++--------- 1 file changed, 33 insertions(+), 11 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index ffdd141efe3..a8c2193a026 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -349,7 +349,7 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, if (nesfmr->nesmr.pbls_used > nesadapter->free_4kpbl) { spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); ret = -ENOMEM; - goto failed_vpbl_alloc; + goto failed_vpbl_avail; } else { nesadapter->free_4kpbl -= nesfmr->nesmr.pbls_used; } @@ -357,7 +357,7 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, if (nesfmr->nesmr.pbls_used > nesadapter->free_256pbl) { spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); ret = -ENOMEM; - goto failed_vpbl_alloc; + goto failed_vpbl_avail; } else { nesadapter->free_256pbl -= nesfmr->nesmr.pbls_used; } @@ -391,14 +391,14 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, goto failed_vpbl_alloc; } - nesfmr->root_vpbl.leaf_vpbl = kzalloc(sizeof(*nesfmr->root_vpbl.leaf_vpbl)*1024, GFP_KERNEL); + nesfmr->leaf_pbl_cnt = nesfmr->nesmr.pbls_used-1; + nesfmr->root_vpbl.leaf_vpbl = kzalloc(sizeof(*nesfmr->root_vpbl.leaf_vpbl)*1024, GFP_ATOMIC); if (!nesfmr->root_vpbl.leaf_vpbl) { spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); ret = -ENOMEM; goto failed_leaf_vpbl_alloc; } - nesfmr->leaf_pbl_cnt = nesfmr->nesmr.pbls_used-1; nes_debug(NES_DBG_MR, "two level pbl, root_vpbl.pbl_vbase=%p" " leaf_pbl_cnt=%d root_vpbl.leaf_vpbl=%p\n", nesfmr->root_vpbl.pbl_vbase, nesfmr->leaf_pbl_cnt, nesfmr->root_vpbl.leaf_vpbl); @@ -519,6 +519,16 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, nesfmr->root_vpbl.pbl_pbase); failed_vpbl_alloc: + if (nesfmr->nesmr.pbls_used != 0) { + spin_lock_irqsave(&nesadapter->pbl_lock, flags); + if (nesfmr->nesmr.pbl_4k) + nesadapter->free_4kpbl += nesfmr->nesmr.pbls_used; + else + nesadapter->free_256pbl += nesfmr->nesmr.pbls_used; + spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); + } + +failed_vpbl_avail: kfree(nesfmr); failed_fmr_alloc: @@ -534,18 +544,14 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, */ static int nes_dealloc_fmr(struct ib_fmr *ibfmr) { + unsigned long flags; struct nes_mr *nesmr = to_nesmr_from_ibfmr(ibfmr); struct nes_fmr *nesfmr = to_nesfmr(nesmr); struct nes_vnic *nesvnic = to_nesvnic(ibfmr->device); struct nes_device *nesdev = nesvnic->nesdev; - struct nes_mr temp_nesmr = *nesmr; + struct nes_adapter *nesadapter = nesdev->nesadapter; int i = 0; - temp_nesmr.ibmw.device = ibfmr->device; - temp_nesmr.ibmw.pd = ibfmr->pd; - temp_nesmr.ibmw.rkey = ibfmr->rkey; - temp_nesmr.ibmw.uobject = NULL; - /* free the resources */ if (nesfmr->leaf_pbl_cnt == 0) { /* single PBL case */ @@ -561,8 +567,24 @@ static int nes_dealloc_fmr(struct ib_fmr *ibfmr) pci_free_consistent(nesdev->pcidev, 8192, nesfmr->root_vpbl.pbl_vbase, nesfmr->root_vpbl.pbl_pbase); } + nesmr->ibmw.device = ibfmr->device; + nesmr->ibmw.pd = ibfmr->pd; + nesmr->ibmw.rkey = ibfmr->rkey; + nesmr->ibmw.uobject = NULL; + + if (nesfmr->nesmr.pbls_used != 0) { + spin_lock_irqsave(&nesadapter->pbl_lock, flags); + if (nesfmr->nesmr.pbl_4k) { + nesadapter->free_4kpbl += nesfmr->nesmr.pbls_used; + WARN_ON(nesadapter->free_4kpbl > nesadapter->max_4kpbl); + } else { + nesadapter->free_256pbl += nesfmr->nesmr.pbls_used; + WARN_ON(nesadapter->free_256pbl > nesadapter->max_256pbl); + } + spin_unlock_irqrestore(&nesadapter->pbl_lock, flags); + } - return nes_dealloc_mw(&temp_nesmr.ibmw); + return nes_dealloc_mw(&nesmr->ibmw); } -- cgit v1.2.3-70-g09d2 From 2e369544ac14de7bd0d76b369c1f6110eefbea8a Mon Sep 17 00:00:00 2001 From: Vadim Makhervaks Date: Sun, 2 Nov 2008 21:39:17 -0800 Subject: RDMA/nes: Fix CQ allocation scheme for multicast receive queue apps Fix CQ allocation for multicast receive queue applications. Before this patch, the CQ was not lined up with the right NIC. Signed-off-by: Vadim Makhervaks Signed-off-by: Chien Tung Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_verbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index a8c2193a026..d36c9a0bf1b 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -1617,7 +1617,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, nes_ucontext->mcrqf = req.mcrqf; if (nes_ucontext->mcrqf) { if (nes_ucontext->mcrqf & 0x80000000) - nescq->hw_cq.cq_number = nesvnic->nic.qp_id + 12 + (nes_ucontext->mcrqf & 0xf) - 1; + nescq->hw_cq.cq_number = nesvnic->nic.qp_id + 28 + 2 * ((nes_ucontext->mcrqf & 0xf) - 1); else if (nes_ucontext->mcrqf & 0x40000000) nescq->hw_cq.cq_number = nes_ucontext->mcrqf & 0xffff; else -- cgit v1.2.3-70-g09d2 From 633693660045b3e46a63ed618eb38a54339fbcc0 Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Sun, 2 Nov 2008 21:40:55 -0800 Subject: RDMA/nes: Mitigate compatibility issue regarding PCIe write credits Under heavy load, there is an compatibility issue regarding PCIe write credits with certain chipsets. It can be mitigated by limiting read requests to 256 Bytes. This workaround is always enabled for Tbird2 on Gladius. We also add a module parameter to enable workaround for non-Gladius cards. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes.c | 16 ++++++++++++++++ drivers/infiniband/hw/nes/nes_hw.h | 1 + 2 files changed, 17 insertions(+) diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index a2b04d62b1a..aa1dc41f04c 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -95,6 +95,10 @@ unsigned int wqm_quanta = 0x10000; module_param(wqm_quanta, int, 0644); MODULE_PARM_DESC(wqm_quanta, "WQM quanta"); +static unsigned int limit_maxrdreqsz; +module_param(limit_maxrdreqsz, bool, 0644); +MODULE_PARM_DESC(limit_maxrdreqsz, "Limit max read request size to 256 Bytes"); + LIST_HEAD(nes_adapter_list); static LIST_HEAD(nes_dev_list); @@ -588,6 +592,18 @@ static int __devinit nes_probe(struct pci_dev *pcidev, const struct pci_device_i nesdev->nesadapter->port_count; } + if ((limit_maxrdreqsz || + ((nesdev->nesadapter->phy_type[0] == NES_PHY_TYPE_GLADIUS) && + (hw_rev == NE020_REV1))) && + (pcie_get_readrq(pcidev) > 256)) { + if (pcie_set_readrq(pcidev, 256)) + printk(KERN_ERR PFX "Unable to set max read request" + " to 256 bytes\n"); + else + nes_debug(NES_DBG_INIT, "Max read request size set" + " to 256 bytes\n"); + } + tasklet_init(&nesdev->dpc_tasklet, nes_dpc, (unsigned long)nesdev); /* bring up the Control QP */ diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h index 610b9d85959..bc0b4de0445 100644 --- a/drivers/infiniband/hw/nes/nes_hw.h +++ b/drivers/infiniband/hw/nes/nes_hw.h @@ -40,6 +40,7 @@ #define NES_PHY_TYPE_ARGUS 4 #define NES_PHY_TYPE_PUMA_1G 5 #define NES_PHY_TYPE_PUMA_10G 6 +#define NES_PHY_TYPE_GLADIUS 7 #define NES_MULTICAST_PF_MAX 8 -- cgit v1.2.3-70-g09d2 From c527c8a7ffa18400c2c1488f7ab5aff5e83f3c8e Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 3 Nov 2008 20:46:21 +0000 Subject: [CIFS] Can't rely on iov length and base when kernel_recvmsg returns error When retrying kernel_recvmsg, reset iov_base and iov_len. Note comment from Sridhar: "In the normal path, iov.iov_len is clearly set to 4. But i think you are running into a case where kernel_recvmsg() is called via 'goto incomplete_rcv' It happens if the previous call fails with EAGAIN. If you want to call recvmsg() after EAGAIN failure, you need to reset iov." Signed-off-by: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/connect.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index e9f9248cb3f..c682be8f298 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -417,9 +417,14 @@ incomplete_rcv: msleep(1); /* minimum sleep to prevent looping allowing socket to clear and app threads to set tcpStatus CifsNeedReconnect if server hung */ - if (pdu_length < 4) + if (pdu_length < 4) { + iov.iov_base = (4 - pdu_length) + + (char *)smb_buffer; + iov.iov_len = pdu_length; + smb_msg.msg_control = NULL; + smb_msg.msg_controllen = 0; goto incomplete_rcv; - else + } else continue; } else if (length <= 0) { if (server->tcpStatus == CifsNew) { -- cgit v1.2.3-70-g09d2 From bffadffd43d438c3143b8d172a463de89345b836 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Tue, 28 Oct 2008 14:44:11 +0800 Subject: PCI: fix VPD limit quirk for Broadcom 5708S VPD quirks need to be called after the VPD capability is initialized. Since VPD initialization now runs after pci_fixup_header (due to the capabilities consolidation), VPD quirks should be done at pci_fixup_final stage correspondingly. Tested-by: Eric Dumazet Signed-off-by: Yu Zhao Signed-off-by: Jesse Barnes --- drivers/pci/quirks.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index bbf66ea8fd8..5049a47030a 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1692,24 +1692,24 @@ static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev) } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5706, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5706S, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5708, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5708S, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5709, - quirk_brcm_570x_limit_vpd); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, - PCI_DEVICE_ID_NX2_5709S, - quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709S, + quirk_brcm_570x_limit_vpd); #ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting -- cgit v1.2.3-70-g09d2 From a7b930cdf8ec790c85f81416c87f7c066679d373 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sun, 2 Nov 2008 13:32:43 -0800 Subject: PCI: annotate return value of pci_ioremap_bar with __iomem Was missing from the initial patch. Acked-by: Arjan van de Ven Signed-off-by: Harvey Harrison Signed-off-by: Jesse Barnes --- include/linux/pci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/pci.h b/include/linux/pci.h index c75b82bda32..feb4657bb04 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1136,7 +1136,7 @@ static inline void pci_mmcfg_late_init(void) { } #endif #ifdef CONFIG_HAS_IOMEM -static inline void * pci_ioremap_bar(struct pci_dev *pdev, int bar) +static inline void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar) { /* * Make sure the BAR is actually a memory resource, not an IO resource -- cgit v1.2.3-70-g09d2 From f5dafca52d366ef8c6c86cbdfecc71a9a78b63a6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 29 Oct 2008 22:35:12 -0700 Subject: PCI: remove excess kernel-doc notation Fix pci/rom.c kernel-doc function notation: Warning(drivers/pci/rom.c:110): Excess function parameter or struct member 'return' description in 'pci_map_rom' Warning(drivers/pci/rom.c:177): Excess function parameter or struct member 'return' description in 'pci_map_rom_copy' Signed-off-by: Randy Dunlap Signed-off-by: Jesse Barnes --- drivers/pci/rom.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index 1f5f6143f35..132a78159b6 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -100,7 +100,8 @@ size_t pci_get_rom_size(void __iomem *rom, size_t size) * pci_map_rom - map a PCI ROM to kernel space * @pdev: pointer to pci device struct * @size: pointer to receive size of pci window over ROM - * @return: kernel virtual pointer to image of ROM + * + * Return: kernel virtual pointer to image of ROM * * Map a PCI ROM into kernel space. If ROM is boot video ROM, * the shadow BIOS copy will be returned instead of the @@ -167,7 +168,8 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) * pci_map_rom_copy - map a PCI ROM to kernel space, create a copy * @pdev: pointer to pci device struct * @size: pointer to receive size of pci window over ROM - * @return: kernel virtual pointer to image of ROM + * + * Return: kernel virtual pointer to image of ROM * * Map a PCI ROM into kernel space. If ROM is boot video ROM, * the shadow BIOS copy will be returned instead of the -- cgit v1.2.3-70-g09d2 From 88e7df0b7ee717f9db3333fb1248827bbdb2d4d3 Mon Sep 17 00:00:00 2001 From: Ed Swierk Date: Mon, 3 Nov 2008 14:41:16 -0800 Subject: PCI: fix range check on mmapped sysfs resource files pci_mmap_fits() returns the wrong answer if the sysfs resource file size is not a multiple of the page size. vm_end and vm_start are already page-aligned, so size - start < nr, causing mmap() to return EINVAL. Signed-off-by: Ed Swierk Signed-off-by: Andrew Morton Signed-off-by: Jesse Barnes --- drivers/pci/pci-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 110022d7868..5d72866897a 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -575,7 +575,7 @@ static int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; start = vma->vm_pgoff; - size = pci_resource_len(pdev, resno) >> PAGE_SHIFT; + size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1; if (start < size && size - start >= nr) return 1; WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n", -- cgit v1.2.3-70-g09d2 From ae2d9fb18e575ed37ffc241ece4bf68f0be4ae32 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 4 Nov 2008 09:10:50 -0500 Subject: ext4: fix missing ext4_unlock_group in error path If we try to free a block which is already freed, the code was returning without first unlocking the group. Signed-off-by: Aneesh Kumar K.V Signed-off-by: "Theodore Ts'o" --- fs/ext4/mballoc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index dfe17a13405..444ad998f72 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -4441,6 +4441,7 @@ ext4_mb_free_metadata(handle_t *handle, struct ext4_buddy *e4b, else if (block >= (entry->start_blk + entry->count)) n = &(*n)->rb_right; else { + ext4_unlock_group(sb, group); ext4_error(sb, __func__, "Double free of blocks %d (%d %d)\n", block, entry->start_blk, entry->count); -- cgit v1.2.3-70-g09d2 From d94e99a64c3beece22dbfb2b335771a59184eb0a Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 4 Nov 2008 09:11:26 -0500 Subject: ext4: Convert to host order before using the values. Use le16_to_cpu to read the s_reserved_gdt_blocks values from super block. Signed-off-by: Aneesh Kumar K.V Signed-off-by: "Theodore Ts'o" --- fs/ext4/super.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 994859df010..e27acd18b4b 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1458,9 +1458,8 @@ static int ext4_fill_flex_info(struct super_block *sb) /* We allocate both existing and potentially added groups */ flex_group_count = ((sbi->s_groups_count + groups_per_flex - 1) + - ((sbi->s_es->s_reserved_gdt_blocks +1 ) << - EXT4_DESC_PER_BLOCK_BITS(sb))) / - groups_per_flex; + ((le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks) + 1) << + EXT4_DESC_PER_BLOCK_BITS(sb))) / groups_per_flex; sbi->s_flex_groups = kzalloc(flex_group_count * sizeof(struct flex_groups), GFP_KERNEL); if (sbi->s_flex_groups == NULL) { -- cgit v1.2.3-70-g09d2 From 14ce0cb411c88681ab8f3a4c9caa7f42e97a3184 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 3 Nov 2008 18:10:55 -0500 Subject: ext4: wait on all pending commits in ext4_sync_fs() In ext4_sync_fs, we only wait for a commit to finish if we started it, but there may be one already in progress which will not be synced. In the case of a data=ordered umount with pending long symlinks which are delayed due to a long list of other I/O on the backing block device, this causes the buffer associated with the long symlinks to not be moved to the inode dirty list in the second phase of fsync_super. Then, before they can be dirtied again, kjournald exits, seeing the UMOUNT flag and the dirty pages are never written to the backing block device, causing long symlink corruption and exposing new or previously freed block data to userspace. To ensure all commits are synced, we flush all journal commits now when sync_fs'ing ext4. Signed-off-by: Arthur Jones Signed-off-by: Andrew Morton Signed-off-by: "Theodore Ts'o" Cc: Eric Sandeen Cc: --- fs/ext4/super.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index e27acd18b4b..e4a241c65db 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2884,12 +2884,9 @@ int ext4_force_commit(struct super_block *sb) /* * Ext4 always journals updates to the superblock itself, so we don't * have to propagate any other updates to the superblock on disk at this - * point. Just start an async writeback to get the buffers on their way - * to the disk. - * - * This implicitly triggers the writebehind on sync(). + * point. (We can probably nuke this function altogether, and remove + * any mention to sb->s_dirt in all of fs/ext4; eventual cleanup...) */ - static void ext4_write_super(struct super_block *sb) { if (mutex_trylock(&sb->s_lock) != 0) @@ -2899,15 +2896,15 @@ static void ext4_write_super(struct super_block *sb) static int ext4_sync_fs(struct super_block *sb, int wait) { - tid_t target; + int ret = 0; trace_mark(ext4_sync_fs, "dev %s wait %d", sb->s_id, wait); sb->s_dirt = 0; - if (jbd2_journal_start_commit(EXT4_SB(sb)->s_journal, &target)) { - if (wait) - jbd2_log_wait_commit(EXT4_SB(sb)->s_journal, target); - } - return 0; + if (wait) + ret = ext4_force_commit(sb); + else + jbd2_journal_start_commit(EXT4_SB(sb)->s_journal, NULL); + return ret; } /* -- cgit v1.2.3-70-g09d2 From c2d06fe338912ee56c2ddd7de5574d5396ed8050 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 11 Sep 2008 10:56:00 +0800 Subject: intel_menlow: don't set max_state a negative value max_state is unsigned long. don't set max_state a negative value Cc : Thomas Sujith Cc : Roel Kluin Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/misc/intel_menlow.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/misc/intel_menlow.c b/drivers/misc/intel_menlow.c index e00a2756e97..124b37ddb5c 100644 --- a/drivers/misc/intel_menlow.c +++ b/drivers/misc/intel_menlow.c @@ -71,6 +71,9 @@ static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev, if (ACPI_FAILURE(status)) return -EFAULT; + if (!value) + return -EINVAL; + *max_state = value - 1; return 0; } @@ -121,7 +124,7 @@ static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev, if (memory_get_int_max_bandwidth(cdev, &max_state)) return -EFAULT; - if (max_state < 0 || state > max_state) + if (state > max_state) return -EINVAL; arg_list.count = 1; -- cgit v1.2.3-70-g09d2 From 9b803c0fc37dc49d06d99d63741e78274801c644 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 3 Nov 2008 15:15:08 -0500 Subject: ftrace: update txt document Impact: Documentation update only A lot of changes have gone into ftrace. This patch updates the ftrace.txt document. Signed-off-by: Steven Rostedt Acked-by: Randy Dunlap Signed-off-by: Ingo Molnar --- Documentation/ftrace.txt | 169 ++++++++++++++++++++--------------------------- 1 file changed, 72 insertions(+), 97 deletions(-) diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index ea5a827395d..0cb989cd512 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -50,26 +50,26 @@ of ftrace. Here is a list of some of the key files: Note: all time values are in microseconds. - current_tracer : This is used to set or display the current tracer + current_tracer: This is used to set or display the current tracer that is configured. - available_tracers : This holds the different types of tracers that + available_tracers: This holds the different types of tracers that have been compiled into the kernel. The tracers listed here can be configured by echoing their name into current_tracer. - tracing_enabled : This sets or displays whether the current_tracer + tracing_enabled: This sets or displays whether the current_tracer is activated and tracing or not. Echo 0 into this file to disable the tracer or 1 to enable it. - trace : This file holds the output of the trace in a human readable + trace: This file holds the output of the trace in a human readable format (described below). - latency_trace : This file shows the same trace but the information + latency_trace: This file shows the same trace but the information is organized more to display possible latencies in the system (described below). - trace_pipe : The output is the same as the "trace" file but this + trace_pipe: The output is the same as the "trace" file but this file is meant to be streamed with live tracing. Reads from this file will block until new data is retrieved. Unlike the "trace" and "latency_trace" @@ -82,11 +82,11 @@ of ftrace. Here is a list of some of the key files: tracer is not adding more data, they will display the same information every time they are read. - iter_ctrl : This file lets the user control the amount of data + iter_ctrl: This file lets the user control the amount of data that is displayed in one of the above output files. - trace_max_latency : Some of the tracers record the max latency. + trace_max_latency: Some of the tracers record the max latency. For example, the time interrupts are disabled. This time is saved in this file. The max trace will also be stored, and displayed by either @@ -94,29 +94,26 @@ of ftrace. Here is a list of some of the key files: only be recorded if the latency is greater than the value in this file. (in microseconds) - trace_entries : This sets or displays the number of trace - entries each CPU buffer can hold. The tracer buffers - are the same size for each CPU. The displayed number - is the size of the CPU buffer and not total size. The + trace_entries: This sets or displays the number of bytes each CPU + buffer can hold. The tracer buffers are the same size + for each CPU. The displayed number is the size of the + CPU buffer and not total size of all buffers. The trace buffers are allocated in pages (blocks of memory that the kernel uses for allocation, usually 4 KB in size). - Since each entry is smaller than a page, if the last - allocated page has room for more entries than were - requested, the rest of the page is used to allocate - entries. + If the last page allocated has room for more bytes + than requested, the rest of the page will be used, + making the actual allocation bigger than requested. + (Note, the size may not be a multiple of the page size due + to buffer managment overhead.) This can only be updated when the current_tracer - is set to "none". + is set to "nop". - NOTE: It is planned on changing the allocated buffers - from being the number of possible CPUS to - the number of online CPUS. - - tracing_cpumask : This is a mask that lets the user only trace + tracing_cpumask: This is a mask that lets the user only trace on specified CPUS. The format is a hex string representing the CPUS. - set_ftrace_filter : When dynamic ftrace is configured in (see the + set_ftrace_filter: When dynamic ftrace is configured in (see the section below "dynamic ftrace"), the code is dynamically modified (code text rewrite) to disable calling of the function profiler (mcount). This lets tracing be configured @@ -130,14 +127,11 @@ of ftrace. Here is a list of some of the key files: be traced. If a function exists in both set_ftrace_filter and set_ftrace_notrace, the function will _not_ be traced. - available_filter_functions : When a function is encountered the first - time by the dynamic tracer, it is recorded and - later the call is converted into a nop. This file - lists the functions that have been recorded - by the dynamic tracer and these functions can - be used to set the ftrace filter by the above - "set_ftrace_filter" file. (See the section "dynamic ftrace" - below for more details). + available_filter_functions: This lists the functions that ftrace + has processed and can trace. These are the function + names that you can pass to "set_ftrace_filter" or + "set_ftrace_notrace". (See the section "dynamic ftrace" + below for more details.) The Tracers @@ -145,7 +139,7 @@ The Tracers Here is the list of current tracers that may be configured. - ftrace - function tracer that uses mcount to trace all functions. + function - function tracer that uses mcount to trace all functions. sched_switch - traces the context switches between tasks. @@ -166,8 +160,8 @@ Here is the list of current tracers that may be configured. the highest priority task to get scheduled after it has been woken up. - none - This is not a tracer. To remove all tracers from tracing - simply echo "none" into current_tracer. + nop - This is not a tracer. To remove all tracers from tracing + simply echo "nop" into current_tracer. Examples of using the tracer @@ -182,7 +176,7 @@ Output format: Here is an example of the output format of the file "trace" -------- -# tracer: ftrace +# tracer: function # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | @@ -192,7 +186,7 @@ Here is an example of the output format of the file "trace" -------- A header is printed with the tracer name that is represented by the trace. -In this case the tracer is "ftrace". Then a header showing the format. Task +In this case the tracer is "function". Then a header showing the format. Task name "bash", the task PID "4251", the CPU that it was running on "01", the timestamp in . format, the function name that was traced "path_put" and the parent function that called this function @@ -1003,22 +997,20 @@ is the stack for the hard interrupt. This hides the fact that NEED_RESCHED has been set. We do not see the 'N' until we switch back to the task's assigned stack. -ftrace ------- +function +-------- -ftrace is not only the name of the tracing infrastructure, but it -is also a name of one of the tracers. The tracer is the function -tracer. Enabling the function tracer can be done from the -debug file system. Make sure the ftrace_enabled is set otherwise -this tracer is a nop. +This tracer is the function tracer. Enabling the function tracer +can be done from the debug file system. Make sure the ftrace_enabled is +set; otherwise this tracer is a nop. # sysctl kernel.ftrace_enabled=1 - # echo ftrace > /debug/tracing/current_tracer + # echo function > /debug/tracing/current_tracer # echo 1 > /debug/tracing/tracing_enabled # usleep 1 # echo 0 > /debug/tracing/tracing_enabled # cat /debug/tracing/trace -# tracer: ftrace +# tracer: function # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | @@ -1040,10 +1032,10 @@ this tracer is a nop. [...] -Note: ftrace uses ring buffers to store the above entries. The newest data -may overwrite the oldest data. Sometimes using echo to stop the trace -is not sufficient because the tracing could have overwritten the data -that you wanted to record. For this reason, it is sometimes better to +Note: function tracer uses ring buffers to store the above entries. +The newest data may overwrite the oldest data. Sometimes using echo to +stop the trace is not sufficient because the tracing could have overwritten +the data that you wanted to record. For this reason, it is sometimes better to disable tracing directly from a program. This allows you to stop the tracing at the point that you hit the part that you are interested in. To disable the tracing directly from a C program, something like following @@ -1077,18 +1069,31 @@ every kernel function, produced by the -pg switch in gcc), starts of pointing to a simple return. (Enabling FTRACE will include the -pg switch in the compiling of the kernel.) -When dynamic ftrace is initialized, it calls kstop_machine to make -the machine act like a uniprocessor so that it can freely modify code -without worrying about other processors executing that same code. At -initialization, the mcount calls are changed to call a "record_ip" -function. After this, the first time a kernel function is called, -it has the calling address saved in a hash table. - -Later on the ftraced kernel thread is awoken and will again call -kstop_machine if new functions have been recorded. The ftraced thread -will change all calls to mcount to "nop". Just calling mcount -and having mcount return has shown a 10% overhead. By converting -it to a nop, there is no measurable overhead to the system. +At compile time every C file object is run through the +recordmcount.pl script (located in the scripts directory). This +script will process the C object using objdump to find all the +locations in the .text section that call mcount. (Note, only +the .text section is processed, since processing other sections +like .init.text may cause races due to those sections being freed). + +A new section called "__mcount_loc" is created that holds references +to all the mcount call sites in the .text section. This section is +compiled back into the original object. The final linker will add +all these references into a single table. + +On boot up, before SMP is initialized, the dynamic ftrace code +scans this table and updates all the locations into nops. It also +records the locations, which are added to the available_filter_functions +list. Modules are processed as they are loaded and before they are +executed. When a module is unloaded, it also removes its functions from +the ftrace function list. This is automatic in the module unload +code, and the module author does not need to worry about it. + +When tracing is enabled, kstop_machine is called to prevent races +with the CPUS executing code being modified (which can cause the +CPU to do undesireable things), and the nops are patched back +to calls. But this time, they do not call mcount (which is just +a function stub). They now call into the ftrace infrastructure. One special side-effect to the recording of the functions being traced is that we can now selectively choose which functions we @@ -1251,36 +1256,6 @@ Produces: We can see that there's no more lock or preempt tracing. -ftraced -------- - -As mentioned above, when dynamic ftrace is configured in, a kernel -thread wakes up once a second and checks to see if there are mcount -calls that need to be converted into nops. If there are not any, then -it simply goes back to sleep. But if there are some, it will call -kstop_machine to convert the calls to nops. - -There may be a case in which you do not want this added latency. -Perhaps you are doing some audio recording and this activity might -cause skips in the playback. There is an interface to disable -and enable the "ftraced" kernel thread. - - # echo 0 > /debug/tracing/ftraced_enabled - -This will disable the calling of kstop_machine to update the -mcount calls to nops. Remember that there is a large overhead -to calling mcount. Without this kernel thread, that overhead will -exist. - -If there are recorded calls to mcount, any write to the ftraced_enabled -file will cause the kstop_machine to run. This means that a -user can manually perform the updates when they want to by simply -echoing a '0' into the ftraced_enabled file. - -The updates are also done at the beginning of enabling a tracer -that uses ftrace function recording. - - trace_pipe ---------- @@ -1289,14 +1264,14 @@ on the tracing is different. Every read from trace_pipe is consumed. This means that subsequent reads will be different. The trace is live. - # echo ftrace > /debug/tracing/current_tracer + # echo function > /debug/tracing/current_tracer # cat /debug/tracing/trace_pipe > /tmp/trace.out & [1] 4153 # echo 1 > /debug/tracing/tracing_enabled # usleep 1 # echo 0 > /debug/tracing/tracing_enabled # cat /debug/tracing/trace -# tracer: ftrace +# tracer: function # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | @@ -1317,7 +1292,7 @@ is live. Note, reading the trace_pipe file will block until more input is added. By changing the tracer, trace_pipe will issue an EOF. We needed -to set the ftrace tracer _before_ cating the trace_pipe file. +to set the function tracer _before_ we "cat" the trace_pipe file. trace entries @@ -1334,10 +1309,10 @@ number of entries. 65620 Note, to modify this, you must have tracing completely disabled. To do that, -echo "none" into the current_tracer. If the current_tracer is not set -to "none", an EINVAL error will be returned. +echo "nop" into the current_tracer. If the current_tracer is not set +to "nop", an EINVAL error will be returned. - # echo none > /debug/tracing/current_tracer + # echo nop > /debug/tracing/current_tracer # echo 100000 > /debug/tracing/trace_entries # cat /debug/tracing/trace_entries 100045 -- cgit v1.2.3-70-g09d2 From 42ec632e7b0185d3776aa5d23380cbdc963151f2 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 3 Nov 2008 15:18:56 -0500 Subject: ftrace: ftrace.txt version update Impact: Documentation update only Update the version that the ftrace document was written for. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- Documentation/ftrace.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index 0cb989cd512..9cc4d685dde 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -8,7 +8,7 @@ Copyright 2008 Red Hat Inc. Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton, John Kacur, and David Teigland. -Written for: 2.6.27-rc1 +Written for: 2.6.28-rc2 Introduction ------------ -- cgit v1.2.3-70-g09d2 From c4dc5071859bf666a5a9d6565f16c51a261a88b7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 4 Nov 2008 13:30:57 +0100 Subject: ALSA: hda - Limit the number of GPIOs show in proc Limit the number of GPIOs shown in proc. Otherwise it gets too long unnecessarily, and hard to analyze. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_proc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c index 743d77922bc..c39af986bff 100644 --- a/sound/pci/hda/hda_proc.c +++ b/sound/pci/hda/hda_proc.c @@ -483,6 +483,8 @@ static void print_gpio(struct snd_info_buffer *buffer, (gpio & AC_GPIO_UNSOLICITED) ? 1 : 0, (gpio & AC_GPIO_WAKE) ? 1 : 0); max = gpio & AC_GPIO_IO_COUNT; + if (!max || max > 8) + return; enable = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_GPIO_MASK, 0); direction = snd_hda_codec_read(codec, nid, 0, -- cgit v1.2.3-70-g09d2 From 7b0f5df4c88bac46fe749d36d905fc7ad0296587 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 4 Nov 2008 11:18:56 -0800 Subject: mlx4_core: Fix unused variable warning Fix drivers/net/mlx4/profile.c:55: warning: 'res_name' defined but not used by making mlx4_dbg() always use all of its parameters, regardless of whether CONFIG_MLX4_DEBUG is set or not. Reported-by: Alexander Beregalov Signed-off-by: Roland Dreier --- drivers/net/mlx4/mlx4.h | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h index fa431fad0ee..56a2e213fe6 100644 --- a/drivers/net/mlx4/mlx4.h +++ b/drivers/net/mlx4/mlx4.h @@ -87,6 +87,9 @@ enum { #ifdef CONFIG_MLX4_DEBUG extern int mlx4_debug_level; +#else /* CONFIG_MLX4_DEBUG */ +#define mlx4_debug_level (0) +#endif /* CONFIG_MLX4_DEBUG */ #define mlx4_dbg(mdev, format, arg...) \ do { \ @@ -94,12 +97,6 @@ extern int mlx4_debug_level; dev_printk(KERN_DEBUG, &mdev->pdev->dev, format, ## arg); \ } while (0) -#else /* CONFIG_MLX4_DEBUG */ - -#define mlx4_dbg(mdev, format, arg...) do { (void) mdev; } while (0) - -#endif /* CONFIG_MLX4_DEBUG */ - #define mlx4_err(mdev, format, arg...) \ dev_err(&mdev->pdev->dev, format, ## arg) #define mlx4_info(mdev, format, arg...) \ -- cgit v1.2.3-70-g09d2 From 9ac8d3fb22b593d39d161dcd716af0f1f7546837 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Mon, 3 Nov 2008 16:58:51 -0600 Subject: [IA64] Simplify SGI uv vs. sn2 driver issues Add partition id, coherence id, and region size to UV to make life simpler for drivers shared between sn2 & uv. Signed-off-by: Russ Anderson Signed-off-by: Tony Luck --- arch/ia64/uv/kernel/setup.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/ia64/uv/kernel/setup.c b/arch/ia64/uv/kernel/setup.c index cf5f28ae96c..7a5ae633198 100644 --- a/arch/ia64/uv/kernel/setup.c +++ b/arch/ia64/uv/kernel/setup.c @@ -19,6 +19,12 @@ EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info); #ifdef CONFIG_IA64_SGI_UV int sn_prom_type; +long sn_partition_id; +EXPORT_SYMBOL(sn_partition_id); +long sn_coherency_id; +EXPORT_SYMBOL_GPL(sn_coherency_id); +long sn_region_size; +EXPORT_SYMBOL(sn_region_size); #endif struct redir_addr { -- cgit v1.2.3-70-g09d2 From 7576f684494e927b901eee25a44ce52c82f9f60e Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Mon, 3 Nov 2008 13:29:41 -0800 Subject: [IA64] Add UV watchlist support. This is used by SGI xp drivers (drivers/misc/sgi-xp). Signed-off-by: Russ Anderson Signed-off-by: Tony Luck --- arch/ia64/include/asm/sn/sn_sal.h | 45 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) diff --git a/arch/ia64/include/asm/sn/sn_sal.h b/arch/ia64/include/asm/sn/sn_sal.h index 57e649d388b..e310fc0135d 100644 --- a/arch/ia64/include/asm/sn/sn_sal.h +++ b/arch/ia64/include/asm/sn/sn_sal.h @@ -90,6 +90,8 @@ #define SN_SAL_SET_CPU_NUMBER 0x02000068 #define SN_SAL_KERNEL_LAUNCH_EVENT 0x02000069 +#define SN_SAL_WATCHLIST_ALLOC 0x02000070 +#define SN_SAL_WATCHLIST_FREE 0x02000071 /* * Service-specific constants @@ -1185,4 +1187,47 @@ ia64_sn_kernel_launch_event(void) SAL_CALL_NOLOCK(rv, SN_SAL_KERNEL_LAUNCH_EVENT, 0, 0, 0, 0, 0, 0, 0); return rv.status; } + +union sn_watchlist_u { + u64 val; + struct { + u64 blade : 16, + size : 32, + filler : 16; + }; +}; + +static inline int +sn_mq_watchlist_alloc(int blade, void *mq, unsigned int mq_size, + unsigned long *intr_mmr_offset) +{ + struct ia64_sal_retval rv; + unsigned long addr; + union sn_watchlist_u size_blade; + int watchlist; + + addr = (unsigned long)mq; + size_blade.size = mq_size; + size_blade.blade = blade; + + /* + * bios returns watchlist number or negative error number. + */ + ia64_sal_oemcall_nolock(&rv, SN_SAL_WATCHLIST_ALLOC, addr, + size_blade.val, (u64)intr_mmr_offset, + (u64)&watchlist, 0, 0, 0); + if (rv.status < 0) + return rv.status; + + return watchlist; +} + +static inline int +sn_mq_watchlist_free(int blade, int watchlist_num) +{ + struct ia64_sal_retval rv; + ia64_sal_oemcall_nolock(&rv, SN_SAL_WATCHLIST_FREE, blade, + watchlist_num, 0, 0, 0, 0, 0); + return rv.status; +} #endif /* _ASM_IA64_SN_SN_SAL_H */ -- cgit v1.2.3-70-g09d2 From d6e15199d1784df90b7535e625f7617bd343d202 Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Mon, 3 Nov 2008 13:32:23 -0800 Subject: [IA64] Add error_recovery_info field to SAL section header Add the error_recovery_info field to the SAL section header, as defined in the SAL Spec. Signed-off-by: Russ Anderson Signed-off-by: Tony Luck --- arch/ia64/include/asm/sal.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/ia64/include/asm/sal.h b/arch/ia64/include/asm/sal.h index ea310c0812a..966797a97c9 100644 --- a/arch/ia64/include/asm/sal.h +++ b/arch/ia64/include/asm/sal.h @@ -337,11 +337,24 @@ typedef struct sal_log_record_header { #define sal_log_severity_fatal 1 #define sal_log_severity_corrected 2 +/* + * Error Recovery Info (ERI) bit decode. From SAL Spec section B.2.2 Table B-3 + * Error Section Error_Recovery_Info Field Definition. + */ +#define ERI_NOT_VALID 0x0 /* Error Recovery Field is not valid */ +#define ERI_NOT_ACCESSIBLE 0x30 /* Resource not accessible */ +#define ERI_CONTAINMENT_WARN 0x22 /* Corrupt data propagated */ +#define ERI_UNCORRECTED_ERROR 0x20 /* Uncorrected error */ +#define ERI_COMPONENT_RESET 0x24 /* Component must be reset */ +#define ERI_CORR_ERROR_LOG 0x21 /* Corrected error, needs logging */ +#define ERI_CORR_ERROR_THRESH 0x29 /* Corrected error threshold exceeded */ + /* Definition of log section header structures */ typedef struct sal_log_sec_header { efi_guid_t guid; /* Unique Section ID */ sal_log_revision_t revision; /* Major and Minor revision of Section */ - u16 reserved; + u8 error_recovery_info; /* Platform error recovery status */ + u8 reserved; u32 len; /* Section length */ } sal_log_section_hdr_t; -- cgit v1.2.3-70-g09d2 From aca14f33104bb7b101df23cdd36c520b7c66bcfd Mon Sep 17 00:00:00 2001 From: Ken'ichi Ohmichi Date: Wed, 29 Oct 2008 14:17:57 -0700 Subject: [IA64] fix the difference between node_mem_map and node_start_pfn makedumpfile[1] cannot run on ia64 discontigmem kernel, because the member node_mem_map of struct pgdat_list has invalid value. This patch fixes it. node_start_pfn shows the start pfn of each node, and node_mem_map should point 'struct page' of each node's node_start_pfn. On my machine, node0's node_start_pfn shows 0x400 and its node_mem_map points 0xa0007fffbf000000. This address is the same as vmem_map, so the node_mem_map points 'struct page' of pfn 0, even if its node_start_pfn shows 0x400. The cause is due to the round down of min_pfn in count_node_pages() and node0's node_mem_map points 'struct page' of inactive pfn (0x0). This patch fixes it. makedumpfile[1]: dump filtering command https://sourceforge.net/projects/makedumpfile/ Signed-off-by: Ken'ichi Ohmichi Cc: Bernhard Walle Cc: Jay Lan Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/include/asm/meminit.h | 1 - arch/ia64/mm/discontig.c | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/ia64/include/asm/meminit.h b/arch/ia64/include/asm/meminit.h index 6bc96ee5432..c0cea375620 100644 --- a/arch/ia64/include/asm/meminit.h +++ b/arch/ia64/include/asm/meminit.h @@ -48,7 +48,6 @@ extern int reserve_elfcorehdr(unsigned long *start, unsigned long *end); */ #define GRANULEROUNDDOWN(n) ((n) & ~(IA64_GRANULE_SIZE-1)) #define GRANULEROUNDUP(n) (((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1)) -#define ORDERROUNDDOWN(n) ((n) & ~((PAGE_SIZE<>PAGE_SHIFT; #endif start = GRANULEROUNDDOWN(start); - start = ORDERROUNDDOWN(start); end = GRANULEROUNDUP(end); mem_data[node].max_pfn = max(mem_data[node].max_pfn, end >> PAGE_SHIFT); -- cgit v1.2.3-70-g09d2 From 9979aa7778e664bb31efb4281a9e118a9909c35c Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 29 Oct 2008 14:17:59 -0700 Subject: [IA64] use common header for software IO/TLB Remove the swiotlb prototypes from the architecture code and use the common header file instead. Signed-off-by: Joerg Roedel Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/hp/common/hwsw_iommu.c | 9 +-------- arch/ia64/include/asm/machvec.h | 22 +--------------------- 2 files changed, 2 insertions(+), 29 deletions(-) diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c index 88b6e6f3fd8..2769dbfd03b 100644 --- a/arch/ia64/hp/common/hwsw_iommu.c +++ b/arch/ia64/hp/common/hwsw_iommu.c @@ -13,19 +13,12 @@ */ #include +#include #include /* swiotlb declarations & definitions: */ extern int swiotlb_late_init_with_default_size (size_t size); -extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent; -extern ia64_mv_dma_free_coherent swiotlb_free_coherent; -extern ia64_mv_dma_map_single_attrs swiotlb_map_single_attrs; -extern ia64_mv_dma_unmap_single_attrs swiotlb_unmap_single_attrs; -extern ia64_mv_dma_map_sg_attrs swiotlb_map_sg_attrs; -extern ia64_mv_dma_unmap_sg_attrs swiotlb_unmap_sg_attrs; -extern ia64_mv_dma_supported swiotlb_dma_supported; -extern ia64_mv_dma_mapping_error swiotlb_dma_mapping_error; /* hwiommu declarations & definitions: */ diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h index 1ea28bcee33..59c17e44668 100644 --- a/arch/ia64/include/asm/machvec.h +++ b/arch/ia64/include/asm/machvec.h @@ -11,6 +11,7 @@ #define _ASM_IA64_MACHVEC_H #include +#include /* forward declarations: */ struct device; @@ -297,27 +298,6 @@ extern void machvec_init_from_cmdline(const char *cmdline); # error Unknown configuration. Update arch/ia64/include/asm/machvec.h. # endif /* CONFIG_IA64_GENERIC */ -/* - * Declare default routines which aren't declared anywhere else: - */ -extern ia64_mv_dma_init swiotlb_init; -extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent; -extern ia64_mv_dma_free_coherent swiotlb_free_coherent; -extern ia64_mv_dma_map_single swiotlb_map_single; -extern ia64_mv_dma_map_single_attrs swiotlb_map_single_attrs; -extern ia64_mv_dma_unmap_single swiotlb_unmap_single; -extern ia64_mv_dma_unmap_single_attrs swiotlb_unmap_single_attrs; -extern ia64_mv_dma_map_sg swiotlb_map_sg; -extern ia64_mv_dma_map_sg_attrs swiotlb_map_sg_attrs; -extern ia64_mv_dma_unmap_sg swiotlb_unmap_sg; -extern ia64_mv_dma_unmap_sg_attrs swiotlb_unmap_sg_attrs; -extern ia64_mv_dma_sync_single_for_cpu swiotlb_sync_single_for_cpu; -extern ia64_mv_dma_sync_sg_for_cpu swiotlb_sync_sg_for_cpu; -extern ia64_mv_dma_sync_single_for_device swiotlb_sync_single_for_device; -extern ia64_mv_dma_sync_sg_for_device swiotlb_sync_sg_for_device; -extern ia64_mv_dma_mapping_error swiotlb_dma_mapping_error; -extern ia64_mv_dma_supported swiotlb_dma_supported; - /* * Define default versions so we can extend machvec for new platforms without having * to update the machvec files for all existing platforms. -- cgit v1.2.3-70-g09d2 From 6a2d26fd3fd1129824ffe53778832f0794d99cc2 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 26 Oct 2008 23:09:19 +0800 Subject: [IA64] remove duplicated #include from pci-dma.c Removed duplicated #include and in arch/ia64/kernel/pci-dma.c. Signed-off-by: Huang Weiyi Signed-off-by: Tony Luck --- arch/ia64/kernel/pci-dma.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c index 031abbf9c87..dbdb778efa0 100644 --- a/arch/ia64/kernel/pci-dma.c +++ b/arch/ia64/kernel/pci-dma.c @@ -12,13 +12,11 @@ #include #include -#include #include #ifdef CONFIG_DMAR #include -#include #include #include -- cgit v1.2.3-70-g09d2 From d8d54b0252280f519ad4f9268d2612b0463b3f9e Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 24 Oct 2008 14:41:09 +0900 Subject: [IA64] remove dead BIO_VMERGE_BOUNDARY definition The block layer dropped the virtual merge feature (b8b3e16cfe6435d961f6aaebcfd52a1ff2a988c5). BIO_VMERGE_BOUNDARY definition is meaningless now (For IA64, BIO_VMERGE_BOUNDARY has been meaningless for a long time since IA64 disables the virtual merge feature). Signed-off-by: FUJITA Tomonori Signed-off-by: Tony Luck --- arch/ia64/include/asm/io.h | 24 ------------------------ 1 file changed, 24 deletions(-) diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h index 7f257507cd8..0d9d16e2d94 100644 --- a/arch/ia64/include/asm/io.h +++ b/arch/ia64/include/asm/io.h @@ -434,28 +434,4 @@ extern void memset_io(volatile void __iomem *s, int c, long n); # endif /* __KERNEL__ */ -/* - * Enabling BIO_VMERGE_BOUNDARY forces us to turn off I/O MMU bypassing. It is said that - * BIO-level virtual merging can give up to 4% performance boost (not verified for ia64). - * On the other hand, we know that I/O MMU bypassing gives ~8% performance improvement on - * SPECweb-like workloads on zx1-based machines. Thus, for now we favor I/O MMU bypassing - * over BIO-level virtual merging. - */ -extern unsigned long ia64_max_iommu_merge_mask; -#if 1 -#define BIO_VMERGE_BOUNDARY 0 -#else -/* - * It makes no sense at all to have this BIO_VMERGE_BOUNDARY macro here. Should be - * replaced by dma_merge_mask() or something of that sort. Note: the only way - * BIO_VMERGE_BOUNDARY is used is to mask off bits. Effectively, our definition gets - * expanded into: - * - * addr & ((ia64_max_iommu_merge_mask + 1) - 1) == (addr & ia64_max_iommu_vmerge_mask) - * - * which is precisely what we want. - */ -#define BIO_VMERGE_BOUNDARY (ia64_max_iommu_merge_mask + 1) -#endif - #endif /* _ASM_IA64_IO_H */ -- cgit v1.2.3-70-g09d2 From f2b3fdc8873629d154a1ef052141ebaf3e5a231d Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 3 Nov 2008 13:54:52 -0800 Subject: [IA64] Build VT-D iommu support into generic kernel Now that all the ia64 mmu pieces are in the tree we can build support into the generic kernel. Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 27eec71429b..9f481ba59a4 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -148,6 +148,7 @@ config IA64_GENERIC select ACPI_NUMA select SWIOTLB select PCI_MSI + select DMAR help This selects the system type of your hardware. A "generic" kernel will run on any supported IA-64 system. However, if you configure -- cgit v1.2.3-70-g09d2 From 072ba49838b42c873c496d72c91bb237914cf3b6 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Sun, 26 Oct 2008 15:26:57 -0700 Subject: ftrace: fix breakage in bin_fmt results In 777e208d40d0953efc6fb4ab58590da3f7d8f02d we changed from outputting field->cpu (a char) to iter->cpu (unsigned int), increasing the resulting structure size by 3 bytes. Signed-off-by: Eric Anholt Signed-off-by: Ingo Molnar --- kernel/trace/trace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 9f3b478f917..974973e39e8 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1755,7 +1755,7 @@ static enum print_line_t print_bin_fmt(struct trace_iterator *iter) return TRACE_TYPE_HANDLED; SEQ_PUT_FIELD_RET(s, entry->pid); - SEQ_PUT_FIELD_RET(s, iter->cpu); + SEQ_PUT_FIELD_RET(s, entry->cpu); SEQ_PUT_FIELD_RET(s, iter->ts); switch (entry->type) { -- cgit v1.2.3-70-g09d2 From 959973b92d3ba235edfa5dcb5df1be1e5d1deba2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 5 Nov 2008 11:30:56 +0100 Subject: ALSA: hda - Add a quirk for MEDION MD96630 Use model=lenovo-ms7195-dig for MEDION MD96630 laptop (17c0:4085) with ALC888 codec. Reference: Novell bnc#412548 https://bugzilla.novell.com/show_bug.cgi?id=412528 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a4666c96a44..a378c014512 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8469,6 +8469,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3bfd, "Lenovo NB0763", ALC883_LENOVO_NB0763), SND_PCI_QUIRK(0x17aa, 0x101d, "Lenovo Sky", ALC888_LENOVO_SKY), SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2), + SND_PCI_QUIRK(0x17c0, 0x4085, "MEDION MD96630", ALC888_LENOVO_MS7195_DIG), SND_PCI_QUIRK(0x17f2, 0x5000, "Albatron KI690-AM2", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66), SND_PCI_QUIRK(0x8086, 0x0001, "DG33BUC", ALC883_3ST_6ch_INTEL), -- cgit v1.2.3-70-g09d2 From 6b0eea21efed26f92e18741e54a3121cf5cd197e Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 24 Oct 2008 09:21:05 +0900 Subject: [SCSI] megaraid: fix mega_internal_command oops scsi_cmnd->cmnd was changed from a static array to a pointer post 2.6.25. It breaks mega_internal_command(): static int mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) { ... scb = &adapter->int_scb; memset(scb, 0, sizeof(scb_t)); scmd = &adapter->int_scmd; memset(scmd, 0, sizeof(Scsi_Cmnd)); sdev = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); scmd->device = sdev; scmd->device->host = adapter->host; scmd->host_scribble = (void *)scb; scmd->cmnd[0] = MEGA_INTERNAL_CMD; mega_internal_command() uses scsi_cmnd allocated internally so scmd->cmnd is NULL here. This patch adds a static array for cdb to adapter_t and uses it here. This also uses scsi_allocate_command/scsi_free_command, the recommended way to allocate struct scsi_cmnd since the driver might use sense_buffer in struct scsi_cmnd. Signed-off-by: FUJITA Tomonori Reviewed-by: Boaz Harrosh Tested-by: Pascal Terjan Reported-by: Pascal Terjan Acked-by: "Yang, Bo" Signed-off-by: James Bottomley --- drivers/scsi/megaraid.c | 11 ++++++++--- drivers/scsi/megaraid.h | 2 +- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 28c9da7d4a5..7dc62deb408 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -4402,6 +4402,10 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) scb_t *scb; int rval; + scmd = scsi_allocate_command(GFP_KERNEL); + if (!scmd) + return -ENOMEM; + /* * The internal commands share one command id and hence are * serialized. This is so because we want to reserve maximum number of @@ -4412,12 +4416,11 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) scb = &adapter->int_scb; memset(scb, 0, sizeof(scb_t)); - scmd = &adapter->int_scmd; - memset(scmd, 0, sizeof(Scsi_Cmnd)); - sdev = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); scmd->device = sdev; + memset(adapter->int_cdb, 0, sizeof(adapter->int_cdb)); + scmd->cmnd = adapter->int_cdb; scmd->device->host = adapter->host; scmd->host_scribble = (void *)scb; scmd->cmnd[0] = MEGA_INTERNAL_CMD; @@ -4456,6 +4459,8 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru) mutex_unlock(&adapter->int_mtx); + scsi_free_command(GFP_KERNEL, scmd); + return rval; } diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h index ee70bd4ae4b..795201fa0b4 100644 --- a/drivers/scsi/megaraid.h +++ b/drivers/scsi/megaraid.h @@ -888,8 +888,8 @@ typedef struct { u8 sglen; /* f/w supported scatter-gather list length */ + unsigned char int_cdb[MAX_COMMAND_SIZE]; scb_t int_scb; - Scsi_Cmnd int_scmd; struct mutex int_mtx; /* To synchronize the internal commands */ struct completion int_waitq; /* wait queue for internal -- cgit v1.2.3-70-g09d2 From 821b3996001508e872582dcafc7575021f122728 Mon Sep 17 00:00:00 2001 From: Lalit Chandivade Date: Fri, 24 Oct 2008 15:13:44 -0700 Subject: [SCSI] qla2xxx: Correct Atmel flash-part handling. Use correct block size (4K) for erase command 0x20 for Atmel Flash. Use dword addresses for determining sector boundary. Cc: Stable Tree Signed-off-by: Lalit Chandivade Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 1 - drivers/scsi/qla2xxx/qla_sup.c | 19 +++++++------------ 2 files changed, 7 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index f25f41a499e..b97194096d8 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2547,7 +2547,6 @@ typedef struct scsi_qla_host { uint8_t fcode_revision[16]; uint32_t fw_revision[4]; - uint16_t fdt_odd_index; uint32_t fdt_wrt_disable; uint32_t fdt_erase_cmd; uint32_t fdt_block_size; diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 90a13211717..e4af678eb2d 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -722,6 +722,7 @@ done: static void qla2xxx_get_fdt_info(scsi_qla_host_t *ha) { +#define FLASH_BLK_SIZE_4K 0x1000 #define FLASH_BLK_SIZE_32K 0x8000 #define FLASH_BLK_SIZE_64K 0x10000 const char *loc, *locations[] = { "MID", "FDT" }; @@ -755,7 +756,6 @@ qla2xxx_get_fdt_info(scsi_qla_host_t *ha) loc = locations[1]; mid = le16_to_cpu(fdt->man_id); fid = le16_to_cpu(fdt->id); - ha->fdt_odd_index = mid == 0x1f; ha->fdt_wrt_disable = fdt->wrt_disable_bits; ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0300 | fdt->erase_cmd); ha->fdt_block_size = le32_to_cpu(fdt->block_size); @@ -788,8 +788,7 @@ no_flash_data: ha->fdt_block_size = FLASH_BLK_SIZE_64K; break; case 0x1f: /* Atmel 26DF081A. */ - ha->fdt_odd_index = 1; - ha->fdt_block_size = FLASH_BLK_SIZE_64K; + ha->fdt_block_size = FLASH_BLK_SIZE_4K; ha->fdt_erase_cmd = flash_conf_to_access_addr(0x0320); ha->fdt_unprotect_sec_cmd = flash_conf_to_access_addr(0x0339); ha->fdt_protect_sec_cmd = flash_conf_to_access_addr(0x0336); @@ -801,9 +800,9 @@ no_flash_data: } done: DEBUG2(qla_printk(KERN_DEBUG, ha, "FDT[%s]: (0x%x/0x%x) erase=0x%x " - "pro=%x upro=%x idx=%d wrtd=0x%x blk=0x%x.\n", loc, mid, fid, + "pro=%x upro=%x wrtd=0x%x blk=0x%x.\n", loc, mid, fid, ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd, - ha->fdt_unprotect_sec_cmd, ha->fdt_odd_index, ha->fdt_wrt_disable, + ha->fdt_unprotect_sec_cmd, ha->fdt_wrt_disable, ha->fdt_block_size)); } @@ -987,13 +986,9 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr, qla24xx_unprotect_flash(ha); for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) { - if (ha->fdt_odd_index) { - findex = faddr << 2; - fdata = findex & sec_mask; - } else { - findex = faddr; - fdata = (findex & sec_mask) << 2; - } + + findex = faddr; + fdata = (findex & sec_mask) << 2; /* Are we at the beginning of a sector? */ if ((findex & rest_addr) == 0) { -- cgit v1.2.3-70-g09d2 From 737faece278ffec78612675bc378a4258d8293bb Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Fri, 24 Oct 2008 15:13:45 -0700 Subject: [SCSI] qla2xxx: Use pci_disable_rom() to manipulate PCI config space. http://bugzilla.kernel.org/show_bug.cgi?id=9422 Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 24 ++++-------------------- 1 file changed, 4 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index a470f2d3270..ecf91ad4027 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -140,7 +140,6 @@ int qla2100_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; unsigned long flags; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; @@ -151,10 +150,7 @@ qla2100_pci_config(scsi_qla_host_t *ha) w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR); pci_write_config_word(ha->pdev, PCI_COMMAND, w); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); /* Get PCI bus information. */ spin_lock_irqsave(&ha->hardware_lock, flags); @@ -174,7 +170,6 @@ int qla2300_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; unsigned long flags = 0; uint32_t cnt; struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; @@ -236,10 +231,7 @@ qla2300_pci_config(scsi_qla_host_t *ha) pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); /* Get PCI bus information. */ spin_lock_irqsave(&ha->hardware_lock, flags); @@ -259,7 +251,6 @@ int qla24xx_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; unsigned long flags = 0; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; @@ -281,10 +272,7 @@ qla24xx_pci_config(scsi_qla_host_t *ha) if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP)) pcie_set_readrq(ha->pdev, 2048); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); ha->chip_revision = ha->pdev->revision; @@ -306,7 +294,6 @@ int qla25xx_pci_config(scsi_qla_host_t *ha) { uint16_t w; - uint32_t d; pci_set_master(ha->pdev); pci_try_set_mwi(ha->pdev); @@ -320,10 +307,7 @@ qla25xx_pci_config(scsi_qla_host_t *ha) if (pci_find_capability(ha->pdev, PCI_CAP_ID_EXP)) pcie_set_readrq(ha->pdev, 2048); - /* Reset expansion ROM address decode enable */ - pci_read_config_dword(ha->pdev, PCI_ROM_ADDRESS, &d); - d &= ~PCI_ROM_ADDRESS_ENABLE; - pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d); + pci_disable_rom(ha->pdev); ha->chip_revision = ha->pdev->revision; -- cgit v1.2.3-70-g09d2 From 680d7db88ace53c673e1c437c9b6abcc053e8d6f Mon Sep 17 00:00:00 2001 From: Shyam Sundar Date: Fri, 24 Oct 2008 15:13:46 -0700 Subject: [SCSI] qla2xxx: Do not honour max_vports from firmware for 2G ISPs and below. For 23XX ISPs, max_vports may return an invalid value. Do not honour it. Cc: Stable Tree Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 2 +- drivers/scsi/qla2xxx/qla_mbx.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index ecf91ad4027..4218f20f5ed 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -964,7 +964,6 @@ qla2x00_setup_chip(scsi_qla_host_t *ha) &ha->fw_minor_version, &ha->fw_subminor_version, &ha->fw_attributes, &ha->fw_memory_size); - qla2x00_resize_request_q(ha); ha->flags.npiv_supported = 0; if ((IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA84XX(ha)) && @@ -976,6 +975,7 @@ qla2x00_setup_chip(scsi_qla_host_t *ha) ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1; } + qla2x00_resize_request_q(ha); if (ql2xallocfwdump) qla2x00_alloc_fw_dump(ha); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 36bc6851e23..3402746ec12 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -1964,7 +1964,7 @@ qla2x00_get_resource_cnts(scsi_qla_host_t *ha, uint16_t *cur_xchg_cnt, *cur_iocb_cnt = mcp->mb[7]; if (orig_iocb_cnt) *orig_iocb_cnt = mcp->mb[10]; - if (max_npiv_vports) + if (ha->flags.npiv_supported && max_npiv_vports) *max_npiv_vports = mcp->mb[11]; } -- cgit v1.2.3-70-g09d2 From 5bff55db3dc4d659f46b4d2fce2f61c1964c2762 Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Fri, 24 Oct 2008 15:13:47 -0700 Subject: [SCSI] qla2xxx: Return a FAILED status when abort mailbox-command fails. Mike Reed noted (https://bugzilla.novell.com/show_bug.cgi?id=421330) that the driver was incorrectly returning a SUCCESS status if the driver's request to the firmware to abort a command failed. By doing so, the mid-layer believed, incorrectly, that the command has completed and has been returned (ultimately clearing scsi_cmnd.request_buffer) yet the driver still has the command. What should correctly happen is a mid-layer escalation (device-reset, etc.) of recovery during which the driver will eventually return the outstanding commands to the mid-layer. Cc: Stable Tree Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 21dd182ad51..35567203ef6 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -728,6 +728,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) if (ha->isp_ops->abort_command(ha, sp)) { DEBUG2(printk("%s(%ld): abort_command " "mbx failed.\n", __func__, ha->host_no)); + ret = FAILED; } else { DEBUG3(printk("%s(%ld): abort_command " "mbx success.\n", __func__, ha->host_no)); -- cgit v1.2.3-70-g09d2 From 3869a1728808fc9e075d0091bb03826fa6ed58b0 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Fri, 24 Oct 2008 15:13:48 -0700 Subject: [SCSI] qla2xxx: Update version number to 8.02.01-k9. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index be5e299df52..eea6720adf1 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.01-k8" +#define QLA2XXX_VERSION "8.02.01-k9" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 -- cgit v1.2.3-70-g09d2 From 26816f1c2bf59a269917815adb1d972b9fb65e3a Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:05 +0100 Subject: [SCSI] zfcp: Dont clear reference from SCSI device to unit It is possible that a remote port has a problem, the SCSI device gets deleted after the rport timeout and then the timeout for pending SCSI commands trigger an abort. For this case, don't delete the reference from the SCSI device to the zfcp unit, so that we can still have the reference to issue an abort request. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_scsi.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index ca8f85f3dad..e46fd3e9f68 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -24,14 +24,10 @@ char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *fcp_rsp_iu) static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt) { struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata; - WARN_ON(!unit); - if (unit) { - atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status); - sdpnt->hostdata = NULL; - unit->device = NULL; - zfcp_erp_unit_failed(unit, 12, NULL); - zfcp_unit_put(unit); - } + atomic_clear_mask(ZFCP_STATUS_UNIT_REGISTERED, &unit->status); + unit->device = NULL; + zfcp_erp_unit_failed(unit, 12, NULL); + zfcp_unit_put(unit); } static int zfcp_scsi_slave_configure(struct scsi_device *sdp) -- cgit v1.2.3-70-g09d2 From 45316a86a67934ab499dcfac44c91aa8f39c4c78 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 4 Nov 2008 16:35:06 +0100 Subject: [SCSI] zfcp: fix req_list_locking. The per adapter req_list_lock must be held with interrupts disabled, otherwise we might end up with nice deadlocks as lockdep tells us (see below). zfcp 0.0.1804: QDIO problem occurred. ========================================================= [ INFO: possible irq lock inversion dependency detected ] 2.6.27-rc8-00035-g4a77035-dirty #86 --------------------------------------------------------- swapper/0 just changed the state of lock: (&adapter->erp_lock){++..}, at: [<00000000002c82ae>] zfcp_erp_adapter_reopen+0x4e/0x8c but this lock took another, hard-irq-unsafe lock in the past: (&adapter->req_list_lock){-+..} and interrupts could create inverse lock ordering between them. [tons of backtraces, but only the interesting part follows] the second lock's dependencies: -> (&adapter->req_list_lock){-+..} ops: 2280627634176 { initial-use at: [<0000000000071f10>] __lock_acquire+0x504/0x18bc [<000000000007335c>] lock_acquire+0x94/0xbc [<00000000003d7224>] _spin_lock_irqsave+0x6c/0xb0 [<00000000002cf684>] zfcp_fsf_req_dismiss_all+0x50/0x140 [<00000000002c87ee>] zfcp_erp_adapter_strategy_generic+0x66/0x3d0 [<00000000002c9498>] zfcp_erp_thread+0x88c/0x1318 [<000000000001b0d2>] kernel_thread_starter+0x6/0xc [<000000000001b0cc>] kernel_thread_starter+0x0/0xc in-softirq-W at: [<0000000000072172>] __lock_acquire+0x766/0x18bc [<000000000007335c>] lock_acquire+0x94/0xbc [<00000000003d7224>] _spin_lock_irqsave+0x6c/0xb0 [<00000000002ca73e>] zfcp_qdio_int_resp+0xbe/0x2ac [<000000000027a1d6>] qdio_kick_inbound_handler+0x82/0xa0 [<000000000027daba>] tiqdio_inbound_processing+0x62/0xf8 [<0000000000047ba4>] tasklet_action+0x100/0x1f4 [<0000000000048b5a>] __do_softirq+0xae/0x154 [<0000000000021e4a>] do_softirq+0xea/0xf0 [<00000000000485de>] irq_exit+0xde/0xe8 [<0000000000268c64>] do_IRQ+0x160/0x1fc [<00000000000261a2>] io_return+0x0/0x8 [<000000000001b8f8>] cpu_idle+0x17c/0x224 hardirq-on-W at: [<0000000000072190>] __lock_acquire+0x784/0x18bc [<000000000007335c>] lock_acquire+0x94/0xbc [<00000000003d702c>] _spin_lock+0x5c/0x9c [<00000000002caff6>] zfcp_fsf_req_send+0x3e/0x158 [<00000000002ce7fe>] zfcp_fsf_exchange_config_data+0x106/0x124 [<00000000002c8948>] zfcp_erp_adapter_strategy_generic+0x1c0/0x3d0 [<00000000002c98ea>] zfcp_erp_thread+0xcde/0x1318 [<000000000001b0d2>] kernel_thread_starter+0x6/0xc [<000000000001b0cc>] kernel_thread_starter+0x0/0xc } ... key at: [<0000000000e356c8>] __key.26629+0x0/0x8 Signed-off-by: Heiko Carstens Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 5ae1d497e5e..694d9c9ea7c 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -770,13 +770,14 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) { struct zfcp_adapter *adapter = req->adapter; struct zfcp_qdio_queue *req_q = &adapter->req_q; + unsigned long flags; int idx; /* put allocated FSF request into hash table */ - spin_lock(&adapter->req_list_lock); + spin_lock_irqsave(&adapter->req_list_lock, flags); idx = zfcp_reqlist_hash(req->req_id); list_add_tail(&req->list, &adapter->req_list[idx]); - spin_unlock(&adapter->req_list_lock); + spin_unlock_irqrestore(&adapter->req_list_lock, flags); req->qdio_outb_usage = atomic_read(&req_q->count); req->issued = get_clock(); -- cgit v1.2.3-70-g09d2 From 88f2a977870af655296a682fe2a58c822cd25bb2 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:07 +0100 Subject: [SCSI] zfcp: fix mempool usage for status_read requests When allocating fsf requests without qtcb, store the pointer to the mempool in the fsf requests for later call to mempool_free. This codepath is only used by the status_read requests. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 694d9c9ea7c..5e8517fc8b6 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -683,6 +683,7 @@ static struct zfcp_fsf_req *zfcp_fsf_alloc_noqtcb(mempool_t *pool) if (!req) return NULL; memset(req, 0, sizeof(*req)); + req->pool = pool; return req; } -- cgit v1.2.3-70-g09d2 From 3765138ae946e6e29b22bf15a9647c600c232639 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:08 +0100 Subject: [SCSI] zfcp: Fix request list handling in error path Fix the handling of the request list in the error path: - Use irqsave for the lock as in the good path. - Before removing the request, check if it is still in the list, a call to dismiss_all might have changed the list in between. - zfcp_qdio_send does not change the queue counters on failure, trying revert something is wrong, so remove this. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 5e8517fc8b6..d024442ee12 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -770,7 +770,6 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_adapter *adapter, static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) { struct zfcp_adapter *adapter = req->adapter; - struct zfcp_qdio_queue *req_q = &adapter->req_q; unsigned long flags; int idx; @@ -780,19 +779,15 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req) list_add_tail(&req->list, &adapter->req_list[idx]); spin_unlock_irqrestore(&adapter->req_list_lock, flags); - req->qdio_outb_usage = atomic_read(&req_q->count); + req->qdio_outb_usage = atomic_read(&adapter->req_q.count); req->issued = get_clock(); if (zfcp_qdio_send(req)) { - /* Queues are down..... */ del_timer(&req->timer); - spin_lock(&adapter->req_list_lock); - zfcp_reqlist_remove(adapter, req); - spin_unlock(&adapter->req_list_lock); - /* undo changes in request queue made for this request */ - atomic_add(req->sbal_number, &req_q->count); - req_q->first -= req->sbal_number; - req_q->first += QDIO_MAX_BUFFERS_PER_Q; - req_q->first %= QDIO_MAX_BUFFERS_PER_Q; /* wrap */ + spin_lock_irqsave(&adapter->req_list_lock, flags); + /* lookup request again, list might have changed */ + if (zfcp_reqlist_find_safe(adapter, req)) + zfcp_reqlist_remove(adapter, req); + spin_unlock_irqrestore(&adapter->req_list_lock, flags); zfcp_erp_adapter_reopen(adapter, 0, 116, req); return -EIO; } -- cgit v1.2.3-70-g09d2 From adc90daffbb454eeae00df92855a88ba79b5b636 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:09 +0100 Subject: [SCSI] zfcp: Fix cast warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix leftover from last typecast patch: drivers/s390/scsi/zfcp_aux.c: In function ‘zfcp_port_enqueue’: drivers/s390/scsi/zfcp_aux.c:629: warning: format ‘%016llx’ expects type ‘long long unsigned int’, but argument 3 has type ‘u64’ Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_aux.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 3b56220fb90..3d4e3e3f3fc 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -610,7 +610,8 @@ struct zfcp_port *zfcp_port_enqueue(struct zfcp_adapter *adapter, u64 wwpn, atomic_set_mask(status | ZFCP_STATUS_COMMON_REMOVE, &port->status); atomic_set(&port->refcount, 0); - dev_set_name(&port->sysfs_device, "0x%016llx", wwpn); + dev_set_name(&port->sysfs_device, "0x%016llx", + (unsigned long long)wwpn); port->sysfs_device.parent = &adapter->ccw_device->dev; port->sysfs_device.release = zfcp_sysfs_port_release; -- cgit v1.2.3-70-g09d2 From 77fd9494bce3188c20d82e45464ed9b1be83bf98 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:10 +0100 Subject: [SCSI] zfcp: Wait for port scan to complete when setting adapter online Attaching a unit immediately after setting the adapter online should be possible. The problem right now is that the port_scan runs from a workqueue and has not finished when the set_online call returns and the sysfs structures for the ports are not available yet. Fix that by waiting for the port scan to complete. Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_ccw.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index b04038c7478..951a8d409d1 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -116,7 +116,9 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device) zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED, 85, NULL); zfcp_erp_wait(adapter); - goto out; + up(&zfcp_data.config_sema); + flush_work(&adapter->scan_work); + return 0; out_scsi_register: zfcp_erp_thread_kill(adapter); -- cgit v1.2.3-70-g09d2 From 7ea633ffad0bcb0b3e0deee81997d07f292e7f44 Mon Sep 17 00:00:00 2001 From: Martin Petermann Date: Tue, 4 Nov 2008 16:35:11 +0100 Subject: [SCSI] zfcp: fix erp timeout cleanup for port open requests If an open port fsf request times out (in erp) the corresponding erp_action member of the fsf request need to set to NULL. If the port structure will be removed later-on there will be still a reference in the fsf request to the non existing erp_action otherwise. Signed-off-by: Martin Petermann Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_erp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 9040f738ff3..35364f64da7 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -472,6 +472,7 @@ static void zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *act) ZFCP_STATUS_ERP_TIMEDOUT)) { act->fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; zfcp_rec_dbf_event_action(142, act); + act->fsf_req->erp_action = NULL; } if (act->status & ZFCP_STATUS_ERP_TIMEDOUT) zfcp_rec_dbf_event_action(143, act); -- cgit v1.2.3-70-g09d2 From d94ce6c6e99252ab2ba340b0398c8651713a9f05 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 4 Nov 2008 16:35:12 +0100 Subject: [SCSI] zfcp: Fix hexdump data in s390dbf traces Fix multiple problems found in the hexdump data: - length calculation was wrong, traces were incomplete - FC payloads were dumped in different record than the output function tried to read - minor fixes in output - allow complete RSCN traces (up to 1024 bytes according to spec) Signed-off-by: Christof Schmitt Signed-off-by: Swen Schillig Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_dbf.c | 42 ++++++++++++++++-------------------------- drivers/s390/scsi/zfcp_dbf.h | 8 ++------ 2 files changed, 18 insertions(+), 32 deletions(-) diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c index 060f5f2352e..31012d58cfb 100644 --- a/drivers/s390/scsi/zfcp_dbf.c +++ b/drivers/s390/scsi/zfcp_dbf.c @@ -30,7 +30,7 @@ static void zfcp_dbf_hexdump(debug_info_t *dbf, void *to, int to_len, dump->offset = offset; dump->size = min(from_len - offset, room); memcpy(dump->data, from + offset, dump->size); - debug_event(dbf, level, dump, dump->size); + debug_event(dbf, level, dump, dump->size + sizeof(*dump)); } } @@ -108,7 +108,7 @@ static int zfcp_dbf_view_header(debug_info_t *id, struct debug_view *view, t.tv_sec, t.tv_nsec); zfcp_dbf_out(&p, "cpu", "%02i", entry->id.fields.cpuid); } else { - zfcp_dbf_outd(&p, NULL, dump->data, dump->size, dump->offset, + zfcp_dbf_outd(&p, "", dump->data, dump->size, dump->offset, dump->total_size); if ((dump->offset + dump->size) == dump->total_size) p += sprintf(p, "\n"); @@ -366,6 +366,7 @@ static void zfcp_hba_dbf_view_response(char **p, break; zfcp_dbf_out(p, "scsi_cmnd", "0x%0Lx", r->u.fcp.cmnd); zfcp_dbf_out(p, "scsi_serial", "0x%016Lx", r->u.fcp.serial); + p += sprintf(*p, "\n"); break; case FSF_QTCB_OPEN_PORT_WITH_DID: @@ -465,7 +466,8 @@ static int zfcp_hba_dbf_view_format(debug_info_t *id, struct debug_view *view, else if (strncmp(r->tag, "berr", ZFCP_DBF_TAG_SIZE) == 0) zfcp_hba_dbf_view_berr(&p, &r->u.berr); - p += sprintf(p, "\n"); + if (strncmp(r->tag, "resp", ZFCP_DBF_TAG_SIZE) != 0) + p += sprintf(p, "\n"); return p - out_buf; } @@ -880,6 +882,7 @@ void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req) struct ct_hdr *hdr = sg_virt(ct->req); struct zfcp_san_dbf_record *r = &adapter->san_dbf_buf; struct zfcp_san_dbf_record_ct_request *oct = &r->u.ct_req; + int level = 3; unsigned long flags; spin_lock_irqsave(&adapter->san_dbf_lock, flags); @@ -896,9 +899,10 @@ void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req) oct->options = hdr->options; oct->max_res_size = hdr->max_res_size; oct->len = min((int)ct->req->length - (int)sizeof(struct ct_hdr), - ZFCP_DBF_CT_PAYLOAD); - memcpy(oct->payload, (void *)hdr + sizeof(struct ct_hdr), oct->len); - debug_event(adapter->san_dbf, 3, r, sizeof(*r)); + ZFCP_DBF_SAN_MAX_PAYLOAD); + debug_event(adapter->san_dbf, level, r, sizeof(*r)); + zfcp_dbf_hexdump(adapter->san_dbf, r, sizeof(*r), level, + (void *)hdr + sizeof(struct ct_hdr), oct->len); spin_unlock_irqrestore(&adapter->san_dbf_lock, flags); } @@ -914,6 +918,7 @@ void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req) struct ct_hdr *hdr = sg_virt(ct->resp); struct zfcp_san_dbf_record *r = &adapter->san_dbf_buf; struct zfcp_san_dbf_record_ct_response *rct = &r->u.ct_resp; + int level = 3; unsigned long flags; spin_lock_irqsave(&adapter->san_dbf_lock, flags); @@ -929,9 +934,10 @@ void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req) rct->expl = hdr->reason_code_expl; rct->vendor_unique = hdr->vendor_unique; rct->len = min((int)ct->resp->length - (int)sizeof(struct ct_hdr), - ZFCP_DBF_CT_PAYLOAD); - memcpy(rct->payload, (void *)hdr + sizeof(struct ct_hdr), rct->len); - debug_event(adapter->san_dbf, 3, r, sizeof(*r)); + ZFCP_DBF_SAN_MAX_PAYLOAD); + debug_event(adapter->san_dbf, level, r, sizeof(*r)); + zfcp_dbf_hexdump(adapter->san_dbf, r, sizeof(*r), level, + (void *)hdr + sizeof(struct ct_hdr), rct->len); spin_unlock_irqrestore(&adapter->san_dbf_lock, flags); } @@ -954,7 +960,7 @@ static void zfcp_san_dbf_event_els(const char *tag, int level, rec->u.els.ls_code = ls_code; debug_event(adapter->san_dbf, level, rec, sizeof(*rec)); zfcp_dbf_hexdump(adapter->san_dbf, rec, sizeof(*rec), level, - buffer, min(buflen, ZFCP_DBF_ELS_MAX_PAYLOAD)); + buffer, min(buflen, ZFCP_DBF_SAN_MAX_PAYLOAD)); spin_unlock_irqrestore(&adapter->san_dbf_lock, flags); } @@ -1008,8 +1014,6 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view, char *out_buf, const char *in_buf) { struct zfcp_san_dbf_record *r = (struct zfcp_san_dbf_record *)in_buf; - char *buffer = NULL; - int buflen = 0, total = 0; char *p = out_buf; if (strncmp(r->tag, "dump", ZFCP_DBF_TAG_SIZE) == 0) @@ -1029,9 +1033,6 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view, zfcp_dbf_out(&p, "gs_subtype", "0x%02x", ct->gs_subtype); zfcp_dbf_out(&p, "options", "0x%02x", ct->options); zfcp_dbf_out(&p, "max_res_size", "0x%04x", ct->max_res_size); - total = ct->len; - buffer = ct->payload; - buflen = min(total, ZFCP_DBF_CT_PAYLOAD); } else if (strncmp(r->tag, "rctc", ZFCP_DBF_TAG_SIZE) == 0) { struct zfcp_san_dbf_record_ct_response *ct = &r->u.ct_resp; zfcp_dbf_out(&p, "cmd_rsp_code", "0x%04x", ct->cmd_rsp_code); @@ -1039,23 +1040,12 @@ static int zfcp_san_dbf_view_format(debug_info_t *id, struct debug_view *view, zfcp_dbf_out(&p, "reason_code", "0x%02x", ct->reason_code); zfcp_dbf_out(&p, "reason_code_expl", "0x%02x", ct->expl); zfcp_dbf_out(&p, "vendor_unique", "0x%02x", ct->vendor_unique); - total = ct->len; - buffer = ct->payload; - buflen = min(total, ZFCP_DBF_CT_PAYLOAD); } else if (strncmp(r->tag, "oels", ZFCP_DBF_TAG_SIZE) == 0 || strncmp(r->tag, "rels", ZFCP_DBF_TAG_SIZE) == 0 || strncmp(r->tag, "iels", ZFCP_DBF_TAG_SIZE) == 0) { struct zfcp_san_dbf_record_els *els = &r->u.els; zfcp_dbf_out(&p, "ls_code", "0x%02x", els->ls_code); - total = els->len; - buffer = els->payload; - buflen = min(total, ZFCP_DBF_ELS_PAYLOAD); } - - zfcp_dbf_outd(&p, "payload", buffer, buflen, 0, total); - if (buflen == total) - p += sprintf(p, "\n"); - return p - out_buf; } diff --git a/drivers/s390/scsi/zfcp_dbf.h b/drivers/s390/scsi/zfcp_dbf.h index e8f450801fe..5d6b2dff855 100644 --- a/drivers/s390/scsi/zfcp_dbf.h +++ b/drivers/s390/scsi/zfcp_dbf.h @@ -163,8 +163,6 @@ struct zfcp_san_dbf_record_ct_request { u8 options; u16 max_res_size; u32 len; -#define ZFCP_DBF_CT_PAYLOAD 24 - u8 payload[ZFCP_DBF_CT_PAYLOAD]; } __attribute__ ((packed)); struct zfcp_san_dbf_record_ct_response { @@ -174,15 +172,11 @@ struct zfcp_san_dbf_record_ct_response { u8 expl; u8 vendor_unique; u32 len; - u8 payload[ZFCP_DBF_CT_PAYLOAD]; } __attribute__ ((packed)); struct zfcp_san_dbf_record_els { u8 ls_code; u32 len; -#define ZFCP_DBF_ELS_PAYLOAD 32 -#define ZFCP_DBF_ELS_MAX_PAYLOAD 1024 - u8 payload[ZFCP_DBF_ELS_PAYLOAD]; } __attribute__ ((packed)); struct zfcp_san_dbf_record { @@ -196,6 +190,8 @@ struct zfcp_san_dbf_record { struct zfcp_san_dbf_record_ct_response ct_resp; struct zfcp_san_dbf_record_els els; } u; +#define ZFCP_DBF_SAN_MAX_PAYLOAD 1024 + u8 payload[32]; } __attribute__ ((packed)); struct zfcp_scsi_dbf_record { -- cgit v1.2.3-70-g09d2 From 939c2288c35132fe340b2694c7d02cacf7593723 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Tue, 4 Nov 2008 19:47:19 -0600 Subject: [SCSI] scsi_error regression: Fix idempotent command handling Drivers want to be able to return DID_TRANSPORT_DISRUPTED and have it do the right thing for commands like tape and passthrouh as far as retries go. The LLDs previously used DID_BUS_BUSY or DID_ERROR which followed the cmd->retries limit, but DID_TRANSPORT_DISRUPTED was skipping that check so it could have caused a problem with tape commands. This patch has DID_TRANSPORT_DISRUPTED check the cmd->retries/cmd->allowed. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 94ed262bdf0..386361778eb 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1340,9 +1340,10 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) * LLD/transport was disrupted during processing of the IO. * The transport class is now blocked/blocking, * and the transport will decide what to do with the IO - * based on its timers and recovery capablilities. + * based on its timers and recovery capablilities if + * there are enough retries. */ - return ADD_TO_MLQUEUE; + goto maybe_retry; case DID_TRANSPORT_FAILFAST: /* * The transport decided to failfast the IO (most likely -- cgit v1.2.3-70-g09d2 From 7f3abf5c7c9a9febdd643b9d4005382144525475 Mon Sep 17 00:00:00 2001 From: Vladimir Sokolovsky Date: Wed, 5 Nov 2008 10:56:52 -0800 Subject: IB/mlx4: Set umem field to NULL in mlx4_ib_alloc_fast_reg_mr() Set mr->umem to NULL in mlx4_ib_alloc_fast_reg_mr(). Otherwise ib_dereg_mr() may invoke ib_umem_release() on a random pointer value and get an oops. Signed-off-by: Vladimir Sokolovsky Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/mr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c index 87f5c5a87b9..8e4d26d56a9 100644 --- a/drivers/infiniband/hw/mlx4/mr.c +++ b/drivers/infiniband/hw/mlx4/mr.c @@ -205,6 +205,7 @@ struct ib_mr *mlx4_ib_alloc_fast_reg_mr(struct ib_pd *pd, goto err_mr; mr->ibmr.rkey = mr->ibmr.lkey = mr->mmr.key; + mr->umem = NULL; return &mr->ibmr; -- cgit v1.2.3-70-g09d2 From 2d3854a37e8b767a51aba38ed6d22817b0631e33 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 5 Nov 2008 13:39:10 +1100 Subject: cpumask: introduce new API, without changing anything Impact: introduce new APIs We want to deprecate cpumasks on the stack, as we are headed for gynormous numbers of CPUs. Eventually, we want to head towards an undefined 'struct cpumask' so they can never be declared on stack. 1) New cpumask functions which take pointers instead of copies. (cpus_* -> cpumask_*) 2) Several new helpers to reduce requirements for temporary cpumasks (cpumask_first_and, cpumask_next_and, cpumask_any_and) 3) Helpers for declaring cpumasks on or offstack for large NR_CPUS (cpumask_var_t, alloc_cpumask_var and free_cpumask_var) 4) 'struct cpumask' for explicitness and to mark new-style code. 5) Make iterator functions stop at nr_cpu_ids (a runtime constant), not NR_CPUS for time efficiency and for smaller dynamic allocations in future. 6) cpumask_copy() so we can allocate less than a full cpumask eventually (for alloc_cpumask_var), and so we can eliminate the 'struct cpumask' definition eventually. 7) work_on_cpu() helper for doing task on a CPU, rather than saving old cpumask for current thread and manipulating it. 8) smp_call_function_many() which is smp_call_function_mask() except taking a cpumask pointer. Note that this patch simply introduces the new functions and leaves the obsolescent ones in place. This is to simplify the transition patches. Signed-off-by: Rusty Russell Signed-off-by: Ingo Molnar --- include/linux/cpumask.h | 502 +++++++++++++++++++++++++++++++++++++++++++++- include/linux/smp.h | 9 + include/linux/workqueue.h | 8 + kernel/cpu.c | 3 + kernel/workqueue.c | 45 +++++ lib/cpumask.c | 73 +++++++ 6 files changed, 638 insertions(+), 2 deletions(-) diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index d3219d73f8e..c8e66619097 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -5,6 +5,9 @@ * Cpumasks provide a bitmap suitable for representing the * set of CPU's in a system, one bit position per CPU number. * + * The new cpumask_ ops take a "struct cpumask *"; the old ones + * use cpumask_t. + * * See detailed comments in the file linux/bitmap.h describing the * data type on which these cpumasks are based. * @@ -31,7 +34,7 @@ * will span the entire range of NR_CPUS. * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * - * The available cpumask operations are: + * The obsolescent cpumask operations are: * * void cpu_set(cpu, mask) turn on bit 'cpu' in mask * void cpu_clear(cpu, mask) turn off bit 'cpu' in mask @@ -138,7 +141,7 @@ #include #include -typedef struct { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t; +typedef struct cpumask { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t; extern cpumask_t _unused_cpumask_arg_; #define cpu_set(cpu, dst) __cpu_set((cpu), &(dst)) @@ -527,4 +530,499 @@ extern cpumask_t cpu_active_map; #define for_each_online_cpu(cpu) for_each_cpu_mask_nr((cpu), cpu_online_map) #define for_each_present_cpu(cpu) for_each_cpu_mask_nr((cpu), cpu_present_map) +/* These are the new versions of the cpumask operators: passed by pointer. + * The older versions will be implemented in terms of these, then deleted. */ +#define cpumask_bits(maskp) ((maskp)->bits) + +#if NR_CPUS <= BITS_PER_LONG +#define CPU_BITS_ALL \ +{ \ + [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ +} + +/* This produces more efficient code. */ +#define nr_cpumask_bits NR_CPUS + +#else /* NR_CPUS > BITS_PER_LONG */ + +#define CPU_BITS_ALL \ +{ \ + [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \ + [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \ +} + +#define nr_cpumask_bits nr_cpu_ids +#endif /* NR_CPUS > BITS_PER_LONG */ + +/* verify cpu argument to cpumask_* operators */ +static inline unsigned int cpumask_check(unsigned int cpu) +{ +#ifdef CONFIG_DEBUG_PER_CPU_MAPS + WARN_ON_ONCE(cpu >= nr_cpumask_bits); +#endif /* CONFIG_DEBUG_PER_CPU_MAPS */ + return cpu; +} + +#if NR_CPUS == 1 +/* Uniprocesor. */ +#define cpumask_first(src) ({ (void)(src); 0; }) +#define cpumask_next(n, src) ({ (void)(src); 1; }) +#define cpumask_next_zero(n, src) ({ (void)(src); 1; }) +#define cpumask_next_and(n, srcp, andp) ({ (void)(srcp), (void)(andp); 1; }) +#define cpumask_any_but(mask, cpu) ({ (void)(mask); (void)(cpu); 0; }) + +#define for_each_cpu(cpu, mask) \ + for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask) +#define for_each_cpu_and(cpu, mask, and) \ + for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask, (void)and) +#else +/** + * cpumask_first - get the first cpu in a cpumask + * @srcp: the cpumask pointer + * + * Returns >= nr_cpu_ids if no cpus set. + */ +static inline unsigned int cpumask_first(const struct cpumask *srcp) +{ + return find_first_bit(cpumask_bits(srcp), nr_cpumask_bits); +} + +/** + * cpumask_next - get the next cpu in a cpumask + * @n: the cpu prior to the place to search (ie. return will be > @n) + * @srcp: the cpumask pointer + * + * Returns >= nr_cpu_ids if no further cpus set. + */ +static inline unsigned int cpumask_next(int n, const struct cpumask *srcp) +{ + /* -1 is a legal arg here. */ + if (n != -1) + cpumask_check(n); + return find_next_bit(cpumask_bits(srcp), nr_cpumask_bits, n+1); +} + +/** + * cpumask_next_zero - get the next unset cpu in a cpumask + * @n: the cpu prior to the place to search (ie. return will be > @n) + * @srcp: the cpumask pointer + * + * Returns >= nr_cpu_ids if no further cpus unset. + */ +static inline unsigned int cpumask_next_zero(int n, const struct cpumask *srcp) +{ + /* -1 is a legal arg here. */ + if (n != -1) + cpumask_check(n); + return find_next_zero_bit(cpumask_bits(srcp), nr_cpumask_bits, n+1); +} + +int cpumask_next_and(int n, const struct cpumask *, const struct cpumask *); +int cpumask_any_but(const struct cpumask *mask, unsigned int cpu); + +#define for_each_cpu(cpu, mask) \ + for ((cpu) = -1; \ + (cpu) = cpumask_next((cpu), (mask)), \ + (cpu) < nr_cpu_ids;) +#define for_each_cpu_and(cpu, mask, and) \ + for ((cpu) = -1; \ + (cpu) = cpumask_next_and((cpu), (mask), (and)), \ + (cpu) < nr_cpu_ids;) +#endif /* SMP */ + +#define CPU_BITS_NONE \ +{ \ + [0 ... BITS_TO_LONGS(NR_CPUS)-1] = 0UL \ +} + +#define CPU_BITS_CPU0 \ +{ \ + [0] = 1UL \ +} + +/** + * cpumask_set_cpu - set a cpu in a cpumask + * @cpu: cpu number (< nr_cpu_ids) + * @dstp: the cpumask pointer + */ +static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp) +{ + set_bit(cpumask_check(cpu), cpumask_bits(dstp)); +} + +/** + * cpumask_clear_cpu - clear a cpu in a cpumask + * @cpu: cpu number (< nr_cpu_ids) + * @dstp: the cpumask pointer + */ +static inline void cpumask_clear_cpu(int cpu, struct cpumask *dstp) +{ + clear_bit(cpumask_check(cpu), cpumask_bits(dstp)); +} + +/** + * cpumask_test_cpu - test for a cpu in a cpumask + * @cpu: cpu number (< nr_cpu_ids) + * @cpumask: the cpumask pointer + * + * No static inline type checking - see Subtlety (1) above. + */ +#define cpumask_test_cpu(cpu, cpumask) \ + test_bit(cpumask_check(cpu), (cpumask)->bits) + +/** + * cpumask_test_and_set_cpu - atomically test and set a cpu in a cpumask + * @cpu: cpu number (< nr_cpu_ids) + * @cpumask: the cpumask pointer + * + * test_and_set_bit wrapper for cpumasks. + */ +static inline int cpumask_test_and_set_cpu(int cpu, struct cpumask *cpumask) +{ + return test_and_set_bit(cpumask_check(cpu), cpumask_bits(cpumask)); +} + +/** + * cpumask_setall - set all cpus (< nr_cpu_ids) in a cpumask + * @dstp: the cpumask pointer + */ +static inline void cpumask_setall(struct cpumask *dstp) +{ + bitmap_fill(cpumask_bits(dstp), nr_cpumask_bits); +} + +/** + * cpumask_clear - clear all cpus (< nr_cpu_ids) in a cpumask + * @dstp: the cpumask pointer + */ +static inline void cpumask_clear(struct cpumask *dstp) +{ + bitmap_zero(cpumask_bits(dstp), nr_cpumask_bits); +} + +/** + * cpumask_and - *dstp = *src1p & *src2p + * @dstp: the cpumask result + * @src1p: the first input + * @src2p: the second input + */ +static inline void cpumask_and(struct cpumask *dstp, + const struct cpumask *src1p, + const struct cpumask *src2p) +{ + bitmap_and(cpumask_bits(dstp), cpumask_bits(src1p), + cpumask_bits(src2p), nr_cpumask_bits); +} + +/** + * cpumask_or - *dstp = *src1p | *src2p + * @dstp: the cpumask result + * @src1p: the first input + * @src2p: the second input + */ +static inline void cpumask_or(struct cpumask *dstp, const struct cpumask *src1p, + const struct cpumask *src2p) +{ + bitmap_or(cpumask_bits(dstp), cpumask_bits(src1p), + cpumask_bits(src2p), nr_cpumask_bits); +} + +/** + * cpumask_xor - *dstp = *src1p ^ *src2p + * @dstp: the cpumask result + * @src1p: the first input + * @src2p: the second input + */ +static inline void cpumask_xor(struct cpumask *dstp, + const struct cpumask *src1p, + const struct cpumask *src2p) +{ + bitmap_xor(cpumask_bits(dstp), cpumask_bits(src1p), + cpumask_bits(src2p), nr_cpumask_bits); +} + +/** + * cpumask_andnot - *dstp = *src1p & ~*src2p + * @dstp: the cpumask result + * @src1p: the first input + * @src2p: the second input + */ +static inline void cpumask_andnot(struct cpumask *dstp, + const struct cpumask *src1p, + const struct cpumask *src2p) +{ + bitmap_andnot(cpumask_bits(dstp), cpumask_bits(src1p), + cpumask_bits(src2p), nr_cpumask_bits); +} + +/** + * cpumask_complement - *dstp = ~*srcp + * @dstp: the cpumask result + * @srcp: the input to invert + */ +static inline void cpumask_complement(struct cpumask *dstp, + const struct cpumask *srcp) +{ + bitmap_complement(cpumask_bits(dstp), cpumask_bits(srcp), + nr_cpumask_bits); +} + +/** + * cpumask_equal - *src1p == *src2p + * @src1p: the first input + * @src2p: the second input + */ +static inline bool cpumask_equal(const struct cpumask *src1p, + const struct cpumask *src2p) +{ + return bitmap_equal(cpumask_bits(src1p), cpumask_bits(src2p), + nr_cpumask_bits); +} + +/** + * cpumask_intersects - (*src1p & *src2p) != 0 + * @src1p: the first input + * @src2p: the second input + */ +static inline bool cpumask_intersects(const struct cpumask *src1p, + const struct cpumask *src2p) +{ + return bitmap_intersects(cpumask_bits(src1p), cpumask_bits(src2p), + nr_cpumask_bits); +} + +/** + * cpumask_subset - (*src1p & ~*src2p) == 0 + * @src1p: the first input + * @src2p: the second input + */ +static inline int cpumask_subset(const struct cpumask *src1p, + const struct cpumask *src2p) +{ + return bitmap_subset(cpumask_bits(src1p), cpumask_bits(src2p), + nr_cpumask_bits); +} + +/** + * cpumask_empty - *srcp == 0 + * @srcp: the cpumask to that all cpus < nr_cpu_ids are clear. + */ +static inline bool cpumask_empty(const struct cpumask *srcp) +{ + return bitmap_empty(cpumask_bits(srcp), nr_cpumask_bits); +} + +/** + * cpumask_full - *srcp == 0xFFFFFFFF... + * @srcp: the cpumask to that all cpus < nr_cpu_ids are set. + */ +static inline bool cpumask_full(const struct cpumask *srcp) +{ + return bitmap_full(cpumask_bits(srcp), nr_cpumask_bits); +} + +/** + * cpumask_weight - Count of bits in *srcp + * @srcp: the cpumask to count bits (< nr_cpu_ids) in. + */ +static inline unsigned int cpumask_weight(const struct cpumask *srcp) +{ + return bitmap_weight(cpumask_bits(srcp), nr_cpumask_bits); +} + +/** + * cpumask_shift_right - *dstp = *srcp >> n + * @dstp: the cpumask result + * @srcp: the input to shift + * @n: the number of bits to shift by + */ +static inline void cpumask_shift_right(struct cpumask *dstp, + const struct cpumask *srcp, int n) +{ + bitmap_shift_right(cpumask_bits(dstp), cpumask_bits(srcp), n, + nr_cpumask_bits); +} + +/** + * cpumask_shift_left - *dstp = *srcp << n + * @dstp: the cpumask result + * @srcp: the input to shift + * @n: the number of bits to shift by + */ +static inline void cpumask_shift_left(struct cpumask *dstp, + const struct cpumask *srcp, int n) +{ + bitmap_shift_left(cpumask_bits(dstp), cpumask_bits(srcp), n, + nr_cpumask_bits); +} + +/** + * cpumask_copy - *dstp = *srcp + * @dstp: the result + * @srcp: the input cpumask + */ +static inline void cpumask_copy(struct cpumask *dstp, + const struct cpumask *srcp) +{ + bitmap_copy(cpumask_bits(dstp), cpumask_bits(srcp), nr_cpumask_bits); +} + +/** + * cpumask_any - pick a "random" cpu from *srcp + * @srcp: the input cpumask + * + * Returns >= nr_cpu_ids if no cpus set. + */ +#define cpumask_any(srcp) cpumask_first(srcp) + +/** + * cpumask_first_and - return the first cpu from *srcp1 & *srcp2 + * @src1p: the first input + * @src2p: the second input + * + * Returns >= nr_cpu_ids if no cpus set in both. See also cpumask_next_and(). + */ +#define cpumask_first_and(src1p, src2p) cpumask_next_and(-1, (src1p), (src2p)) + +/** + * cpumask_any_and - pick a "random" cpu from *mask1 & *mask2 + * @mask1: the first input cpumask + * @mask2: the second input cpumask + * + * Returns >= nr_cpu_ids if no cpus set. + */ +#define cpumask_any_and(mask1, mask2) cpumask_first_and((mask1), (mask2)) + +/** + * to_cpumask - convert an NR_CPUS bitmap to a struct cpumask * + * @bitmap: the bitmap + * + * There are a few places where cpumask_var_t isn't appropriate and + * static cpumasks must be used (eg. very early boot), yet we don't + * expose the definition of 'struct cpumask'. + * + * This does the conversion, and can be used as a constant initializer. + */ +#define to_cpumask(bitmap) \ + ((struct cpumask *)(1 ? (bitmap) \ + : (void *)sizeof(__check_is_bitmap(bitmap)))) + +static inline int __check_is_bitmap(const unsigned long *bitmap) +{ + return 1; +} + +/** + * cpumask_size - size to allocate for a 'struct cpumask' in bytes + * + * This will eventually be a runtime variable, depending on nr_cpu_ids. + */ +static inline size_t cpumask_size(void) +{ + /* FIXME: Once all cpumask assignments are eliminated, this + * can be nr_cpumask_bits */ + return BITS_TO_LONGS(NR_CPUS) * sizeof(long); +} + +/* + * cpumask_var_t: struct cpumask for stack usage. + * + * Oh, the wicked games we play! In order to make kernel coding a + * little more difficult, we typedef cpumask_var_t to an array or a + * pointer: doing &mask on an array is a noop, so it still works. + * + * ie. + * cpumask_var_t tmpmask; + * if (!alloc_cpumask_var(&tmpmask, GFP_KERNEL)) + * return -ENOMEM; + * + * ... use 'tmpmask' like a normal struct cpumask * ... + * + * free_cpumask_var(tmpmask); + */ +#ifdef CONFIG_CPUMASK_OFFSTACK +typedef struct cpumask *cpumask_var_t; + +bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags); +void alloc_bootmem_cpumask_var(cpumask_var_t *mask); +void free_cpumask_var(cpumask_var_t mask); + +#else +typedef struct cpumask cpumask_var_t[1]; + +static inline bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags) +{ + return true; +} + +static inline void alloc_bootmem_cpumask_var(cpumask_var_t *mask) +{ +} + +static inline void free_cpumask_var(cpumask_var_t mask) +{ +} +#endif /* CONFIG_CPUMASK_OFFSTACK */ + +/* The pointer versions of the maps, these will become the primary versions. */ +#define cpu_possible_mask ((const struct cpumask *)&cpu_possible_map) +#define cpu_online_mask ((const struct cpumask *)&cpu_online_map) +#define cpu_present_mask ((const struct cpumask *)&cpu_present_map) +#define cpu_active_mask ((const struct cpumask *)&cpu_active_map) + +/* It's common to want to use cpu_all_mask in struct member initializers, + * so it has to refer to an address rather than a pointer. */ +extern const DECLARE_BITMAP(cpu_all_bits, NR_CPUS); +#define cpu_all_mask to_cpumask(cpu_all_bits) + +/* First bits of cpu_bit_bitmap are in fact unset. */ +#define cpu_none_mask to_cpumask(cpu_bit_bitmap[0]) + +/* Wrappers for arch boot code to manipulate normally-constant masks */ +static inline void set_cpu_possible(unsigned int cpu, bool possible) +{ + if (possible) + cpumask_set_cpu(cpu, &cpu_possible_map); + else + cpumask_clear_cpu(cpu, &cpu_possible_map); +} + +static inline void set_cpu_present(unsigned int cpu, bool present) +{ + if (present) + cpumask_set_cpu(cpu, &cpu_present_map); + else + cpumask_clear_cpu(cpu, &cpu_present_map); +} + +static inline void set_cpu_online(unsigned int cpu, bool online) +{ + if (online) + cpumask_set_cpu(cpu, &cpu_online_map); + else + cpumask_clear_cpu(cpu, &cpu_online_map); +} + +static inline void set_cpu_active(unsigned int cpu, bool active) +{ + if (active) + cpumask_set_cpu(cpu, &cpu_active_map); + else + cpumask_clear_cpu(cpu, &cpu_active_map); +} + +static inline void init_cpu_present(const struct cpumask *src) +{ + cpumask_copy(&cpu_present_map, src); +} + +static inline void init_cpu_possible(const struct cpumask *src) +{ + cpumask_copy(&cpu_possible_map, src); +} + +static inline void init_cpu_online(const struct cpumask *src) +{ + cpumask_copy(&cpu_online_map, src); +} #endif /* __LINUX_CPUMASK_H */ diff --git a/include/linux/smp.h b/include/linux/smp.h index 2e4d58b26c0..3f9a60043a9 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -64,8 +64,17 @@ extern void smp_cpus_done(unsigned int max_cpus); * Call a function on all other processors */ int smp_call_function(void(*func)(void *info), void *info, int wait); +/* Deprecated: use smp_call_function_many() which uses a cpumask ptr. */ int smp_call_function_mask(cpumask_t mask, void(*func)(void *info), void *info, int wait); + +static inline void smp_call_function_many(const struct cpumask *mask, + void (*func)(void *info), void *info, + int wait) +{ + smp_call_function_mask(*mask, func, info, wait); +} + int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, int wait); void __smp_call_function_single(int cpuid, struct call_single_data *data); diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index 89a5a1231ff..b36291130f2 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -240,4 +240,12 @@ void cancel_rearming_delayed_work(struct delayed_work *work) cancel_delayed_work_sync(work); } +#ifndef CONFIG_SMP +static inline long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg) +{ + return fn(arg); +} +#else +long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg); +#endif /* CONFIG_SMP */ #endif diff --git a/kernel/cpu.c b/kernel/cpu.c index 86d49045dae..5a732c5ef08 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -499,3 +499,6 @@ const unsigned long cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)] = { #endif }; EXPORT_SYMBOL_GPL(cpu_bit_bitmap); + +const DECLARE_BITMAP(cpu_all_bits, NR_CPUS) = CPU_BITS_ALL; +EXPORT_SYMBOL(cpu_all_bits); diff --git a/kernel/workqueue.c b/kernel/workqueue.c index f928f2a87b9..d4dc69ddebd 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -970,6 +970,51 @@ undo: return ret; } +#ifdef CONFIG_SMP +struct work_for_cpu { + struct work_struct work; + long (*fn)(void *); + void *arg; + long ret; +}; + +static void do_work_for_cpu(struct work_struct *w) +{ + struct work_for_cpu *wfc = container_of(w, struct work_for_cpu, work); + + wfc->ret = wfc->fn(wfc->arg); +} + +/** + * work_on_cpu - run a function in user context on a particular cpu + * @cpu: the cpu to run on + * @fn: the function to run + * @arg: the function arg + * + * This will return -EINVAL in the cpu is not online, or the return value + * of @fn otherwise. + */ +long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg) +{ + struct work_for_cpu wfc; + + INIT_WORK(&wfc.work, do_work_for_cpu); + wfc.fn = fn; + wfc.arg = arg; + get_online_cpus(); + if (unlikely(!cpu_online(cpu))) + wfc.ret = -EINVAL; + else { + schedule_work_on(cpu, &wfc.work); + flush_work(&wfc.work); + } + put_online_cpus(); + + return wfc.ret; +} +EXPORT_SYMBOL_GPL(work_on_cpu); +#endif /* CONFIG_SMP */ + void __init init_workqueues(void) { cpu_populated_map = cpu_online_map; diff --git a/lib/cpumask.c b/lib/cpumask.c index 5f97dc25ef9..5ceb4211c83 100644 --- a/lib/cpumask.c +++ b/lib/cpumask.c @@ -2,6 +2,7 @@ #include #include #include +#include int __first_cpu(const cpumask_t *srcp) { @@ -35,3 +36,75 @@ int __any_online_cpu(const cpumask_t *mask) return cpu; } EXPORT_SYMBOL(__any_online_cpu); + +/** + * cpumask_next_and - get the next cpu in *src1p & *src2p + * @n: the cpu prior to the place to search (ie. return will be > @n) + * @src1p: the first cpumask pointer + * @src2p: the second cpumask pointer + * + * Returns >= nr_cpu_ids if no further cpus set in both. + */ +int cpumask_next_and(int n, const struct cpumask *src1p, + const struct cpumask *src2p) +{ + while ((n = cpumask_next(n, src1p)) < nr_cpu_ids) + if (cpumask_test_cpu(n, src2p)) + break; + return n; +} +EXPORT_SYMBOL(cpumask_next_and); + +/** + * cpumask_any_but - return a "random" in a cpumask, but not this one. + * @mask: the cpumask to search + * @cpu: the cpu to ignore. + * + * Often used to find any cpu but smp_processor_id() in a mask. + * Returns >= nr_cpu_ids if no cpus set. + */ +int cpumask_any_but(const struct cpumask *mask, unsigned int cpu) +{ + unsigned int i; + + for_each_cpu(i, mask) + if (i != cpu) + break; + return i; +} + +/* These are not inline because of header tangles. */ +#ifdef CONFIG_CPUMASK_OFFSTACK +bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags) +{ + if (likely(slab_is_available())) + *mask = kmalloc(cpumask_size(), flags); + else { +#ifdef CONFIG_DEBUG_PER_CPU_MAPS + printk(KERN_ERR + "=> alloc_cpumask_var: kmalloc not available!\n"); + dump_stack(); +#endif + *mask = NULL; + } +#ifdef CONFIG_DEBUG_PER_CPU_MAPS + if (!*mask) { + printk(KERN_ERR "=> alloc_cpumask_var: failed!\n"); + dump_stack(); + } +#endif + return *mask != NULL; +} +EXPORT_SYMBOL(alloc_cpumask_var); + +void __init alloc_bootmem_cpumask_var(cpumask_var_t *mask) +{ + *mask = alloc_bootmem(cpumask_size()); +} + +void free_cpumask_var(cpumask_var_t mask) +{ + kfree(mask); +} +EXPORT_SYMBOL(free_cpumask_var); +#endif -- cgit v1.2.3-70-g09d2 From 1547a01226bcc3fd575fd5383b8b55476a02b518 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 6 Nov 2008 10:53:54 -0600 Subject: [IA64] reorder Kconfig options to match x86 No functional change, just reorder some config options and update the "Power management and ACPI" label to match the defacto x86 standard. Signed-off-by: Bjorn Helgaas Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 9f481ba59a4..6bd91ed7cd0 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -586,7 +586,7 @@ source "fs/Kconfig.binfmt" endmenu -menu "Power management and ACPI" +menu "Power management and ACPI options" source "kernel/power/Kconfig" @@ -642,6 +642,8 @@ source "net/Kconfig" source "drivers/Kconfig" +source "arch/ia64/hp/sim/Kconfig" + config MSPEC tristate "Memory special operations driver" depends on IA64 @@ -653,6 +655,12 @@ config MSPEC source "fs/Kconfig" +source "arch/ia64/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + source "arch/ia64/kvm/Kconfig" source "lib/Kconfig" @@ -679,11 +687,3 @@ config IRQ_PER_CPU config IOMMU_HELPER def_bool (IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_GENERIC || SWIOTLB) - -source "arch/ia64/hp/sim/Kconfig" - -source "arch/ia64/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" -- cgit v1.2.3-70-g09d2 From 62ee0540f5e5a804b79cae8b3c0185a85f02436b Mon Sep 17 00:00:00 2001 From: Doug Chapman Date: Wed, 5 Nov 2008 17:57:52 -0500 Subject: [IA64] fix boot panic caused by offline CPUs This fixes a regression introduced by 2c6e6db41f01b6b4eb98809350827c9678996698 "Minimize per_cpu reservations." That patch incorrectly used information about what CPUs are possible that was not yet initialized by ACPI. The end result was that per_cpu structures for offline CPUs were not initialized causing a NULL pointer reference. Since we cannot do the full acpi_boot_init() call any earlier, the simplest fix is to just parse the MADT for SAPIC entries early to find the CPU info. This should also allow for some cleanup of the code added by the "Minimize per_cpu reservations". This patch just fixes the regressions, the cleanup will come in a later patch. Signed-off-by: Doug Chapman Signed-off-by: Alex Chiang CC: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/kernel/acpi.c | 29 ++++++++++++++++++++++++----- arch/ia64/kernel/setup.c | 7 ++++--- 2 files changed, 28 insertions(+), 8 deletions(-) diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 0635015d0aa..bd7acc71e8a 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -678,6 +678,30 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table) return 0; } +int __init early_acpi_boot_init(void) +{ + int ret; + + /* + * do a partial walk of MADT to determine how many CPUs + * we have including offline CPUs + */ + if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) { + printk(KERN_ERR PREFIX "Can't find MADT\n"); + return 0; + } + + ret = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, + acpi_parse_lsapic, NR_CPUS); + if (ret < 1) + printk(KERN_ERR PREFIX + "Error parsing MADT - no LAPIC entries\n"); + + return 0; +} + + + int __init acpi_boot_init(void) { @@ -701,11 +725,6 @@ int __init acpi_boot_init(void) printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n"); - if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, acpi_parse_lsapic, NR_CPUS) - < 1) - printk(KERN_ERR PREFIX - "Error parsing MADT - no LAPIC entries\n"); - if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0) < 0) printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index ae7911702bf..bf441f49682 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -561,8 +561,12 @@ setup_arch (char **cmdline_p) #ifdef CONFIG_ACPI /* Initialize the ACPI boot-time table parser */ acpi_table_init(); + early_acpi_boot_init(); # ifdef CONFIG_ACPI_NUMA acpi_numa_init(); +#ifdef CONFIG_ACPI_HOTPLUG_CPU + prefill_possible_map(); +#endif per_cpu_scan_finalize((cpus_weight(early_cpu_possible_map) == 0 ? 32 : cpus_weight(early_cpu_possible_map)), additional_cpus > 0 ? additional_cpus : 0); @@ -853,9 +857,6 @@ void __init setup_per_cpu_areas (void) { /* start_kernel() requires this... */ -#ifdef CONFIG_ACPI_HOTPLUG_CPU - prefill_possible_map(); -#endif } /* -- cgit v1.2.3-70-g09d2 From 5704d626e7c770ef4a984a697bac7eff07420a39 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 16:17:42 -0700 Subject: ACPI: remove comments about debug layer/level to use I don't think there's any point in cluttering the code with these. Better to improve the documentation so *anybody* can figure out what layer & level to use. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/pci_root.c | 6 ------ drivers/acpi/video.c | 6 ------ 2 files changed, 12 deletions(-) diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 1b8f67d21d5..642554b1b60 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -376,15 +376,9 @@ static int acpi_pci_root_remove(struct acpi_device *device, int type) static int __init acpi_pci_root_init(void) { - if (acpi_pci_disabled) return 0; - /* DEBUG: - acpi_dbg_layer = ACPI_PCI_COMPONENT; - acpi_dbg_level = 0xFFFFFFFF; - */ - if (acpi_bus_register_driver(&acpi_pci_root_driver) < 0) return -ENODEV; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index a29b0ccac65..bf0c26a7368 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -2094,12 +2094,6 @@ static int __init acpi_video_init(void) { int result = 0; - - /* - acpi_dbg_level = 0xFFFFFFFF; - acpi_dbg_layer = 0x08000000; - */ - acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir); if (!acpi_video_dir) return -ENODEV; -- cgit v1.2.3-70-g09d2 From 5b881479af4352791e5004b74e3639f1416c5fe4 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 16:17:47 -0700 Subject: ACPI: SBS: remove useless acpi_cm_sbs_init() initcall acpi_cm_sbs_init() doesn't do anything, so we can just remove it. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/cm_sbs.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/acpi/cm_sbs.c b/drivers/acpi/cm_sbs.c index 4441e84b28a..80d5c88e68c 100644 --- a/drivers/acpi/cm_sbs.c +++ b/drivers/acpi/cm_sbs.c @@ -105,9 +105,3 @@ void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir_param) return; } EXPORT_SYMBOL(acpi_unlock_battery_dir); - -static int __init acpi_cm_sbs_init(void) -{ - return 0; -} -subsys_initcall(acpi_cm_sbs_init); -- cgit v1.2.3-70-g09d2 From fefe5ab3d67b0ade6200fec5ed6f2812cbcbb658 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 16:17:58 -0700 Subject: ACPI: remove CONFIG_ACPI_POWER Remove CONFIG_ACPI_POWER. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". The interfaces under CONFIG_ACPI_POWER (acpi_device_sleep_wake(), acpi_power_transition(), etc) are called unconditionally from the ACPI core, so we already depend on it always being present. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/Kconfig | 4 ---- drivers/acpi/Makefile | 2 +- include/acpi/acpi_drivers.h | 2 -- 3 files changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index f4f63291750..4fa7866a9a5 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -341,10 +341,6 @@ config ACPI_PCI_SLOT help you correlate PCI bus addresses with the physical geography of your slots. If you are unsure, say N. -config ACPI_POWER - bool - default y - config ACPI_SYSTEM bool default y diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index d91c027ece8..8017f63920c 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -51,7 +51,7 @@ obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o obj-$(CONFIG_ACPI_PROCESSOR) += processor.o obj-$(CONFIG_ACPI_CONTAINER) += container.o obj-$(CONFIG_ACPI_THERMAL) += thermal.o -obj-$(CONFIG_ACPI_POWER) += power.o +obj-y += power.o obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o obj-$(CONFIG_ACPI_DEBUG) += debug.o obj-$(CONFIG_ACPI_NUMA) += numa.o diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index cf04c6011c2..818215f89e7 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -86,7 +86,6 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_device *device, int domain, Power Resource -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_POWER int acpi_device_sleep_wake(struct acpi_device *dev, int enable, int sleep_state, int dev_state); int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state); @@ -94,7 +93,6 @@ int acpi_disable_wakeup_device_power(struct acpi_device *dev); int acpi_power_get_inferred_state(struct acpi_device *device); int acpi_power_transition(struct acpi_device *device, int state); extern int acpi_power_nocheck; -#endif /* -------------------------------------------------------------------------- Embedded Controller -- cgit v1.2.3-70-g09d2 From 8950d89acaa8c353869e681772479d7955ae6f7a Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 16:18:03 -0700 Subject: ACPI: remove CONFIG_ACPI_EC Remove CONFIG_ACPI_EC. It was always set the same as CONFIG_ACPI, and it had no menu label, so there was no way to set it to anything other than "y". Per section 6.5.4 of the ACPI 3.0b specification, OSPM must make Embedded Controller operation regions, accessed via the Embedded Controllers described in ECDT, available before executing any control method. The ECDT table is optional, but if it is present, the above text means that the EC it describes is a required part of the ACPI subsystem, so CONFIG_ACPI_EC=n wouldn't make sense. Signed-off-by: Bjorn Helgaas Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/Kconfig | 8 -------- drivers/acpi/Makefile | 2 +- drivers/acpi/bus.c | 3 +-- drivers/char/sonypi.c | 4 ++-- drivers/misc/Kconfig | 4 ++-- include/acpi/acpi_drivers.h | 2 -- include/linux/acpi.h | 4 ---- 7 files changed, 6 insertions(+), 21 deletions(-) diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 4fa7866a9a5..90cb2a823b5 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -324,14 +324,6 @@ config ACPI_DEBUG_FUNC_TRACE ACPI Debug Statements slow down ACPI processing. Function trace is about half of the penalty and is rarely useful. -config ACPI_EC - bool - default y - help - This driver is required on some systems for the proper operation of - the battery and thermal drivers. If you are compiling for a - mobile system, say Y. - config ACPI_PCI_SLOT tristate "PCI slot detection driver" default n diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 8017f63920c..fc622316a7d 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -39,7 +39,7 @@ obj-y += sleep/ obj-y += bus.o glue.o obj-y += scan.o # Keep EC driver first. Initialization of others depend on it. -obj-$(CONFIG_ACPI_EC) += ec.o +obj-y += ec.o obj-$(CONFIG_ACPI_AC) += ac.o obj-$(CONFIG_ACPI_BATTERY) += battery.o obj-$(CONFIG_ACPI_BUTTON) += button.o diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index c797c6473f3..765fd1c56cd 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -774,7 +774,7 @@ static int __init acpi_bus_init(void) "Unable to initialize ACPI OS objects\n"); goto error1; } -#ifdef CONFIG_ACPI_EC + /* * ACPI 2.0 requires the EC driver to be loaded and work before * the EC device is found in the namespace (i.e. before acpi_initialize_objects() @@ -785,7 +785,6 @@ static int __init acpi_bus_init(void) */ status = acpi_ec_ecdt_probe(); /* Ignore result. Not having an ECDT is not fatal. */ -#endif status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION); if (ACPI_FAILURE(status)) { diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 85e0eb76eea..1b128d1e215 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -523,7 +523,7 @@ static int acpi_driver_registered; static int sonypi_ec_write(u8 addr, u8 value) { -#ifdef CONFIG_ACPI_EC +#ifdef CONFIG_ACPI if (SONYPI_ACPI_ACTIVE) return ec_write(addr, value); #endif @@ -539,7 +539,7 @@ static int sonypi_ec_write(u8 addr, u8 value) static int sonypi_ec_read(u8 addr, u8 *value) { -#ifdef CONFIG_ACPI_EC +#ifdef CONFIG_ACPI if (SONYPI_ACPI_ACTIVE) return ec_read(addr, value); #endif diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 9494400e8fd..4494ad27cbf 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -230,7 +230,7 @@ config HP_WMI config MSI_LAPTOP tristate "MSI Laptop Extras" depends on X86 - depends on ACPI_EC + depends on ACPI depends on BACKLIGHT_CLASS_DEVICE ---help--- This is a driver for laptops built by MSI (MICRO-STAR @@ -260,7 +260,7 @@ config PANASONIC_LAPTOP config COMPAL_LAPTOP tristate "Compal Laptop Extras" depends on X86 - depends on ACPI_EC + depends on ACPI depends on BACKLIGHT_CLASS_DEVICE ---help--- This is a driver for laptops built by Compal: diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 818215f89e7..b3c40dc9d6b 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -97,10 +97,8 @@ extern int acpi_power_nocheck; /* -------------------------------------------------------------------------- Embedded Controller -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_EC int acpi_ec_ecdt_probe(void); int acpi_boot_ec_enable(void); -#endif /* -------------------------------------------------------------------------- Processor diff --git a/include/linux/acpi.h b/include/linux/acpi.h index fd6a452b0ce..d7846bdd272 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -163,8 +163,6 @@ struct acpi_pci_driver { int acpi_pci_register_driver(struct acpi_pci_driver *driver); void acpi_pci_unregister_driver(struct acpi_pci_driver *driver); -#ifdef CONFIG_ACPI_EC - extern int ec_read(u8 addr, u8 *val); extern int ec_write(u8 addr, u8 val); extern int ec_transaction(u8 command, @@ -172,8 +170,6 @@ extern int ec_transaction(u8 command, u8 *rdata, unsigned rdata_len, int force_poll); -#endif /*CONFIG_ACPI_EC*/ - #if defined(CONFIG_ACPI_WMI) || defined(CONFIG_ACPI_WMI_MODULE) typedef void (*wmi_notify_handler) (u32 value, void *context); -- cgit v1.2.3-70-g09d2 From ac51d83705c2a38c71f39cde99708b14e6212a60 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 6 Nov 2008 16:49:36 -0500 Subject: ext4: calculate journal credits correctly This fixes a 2.6.27 regression which was introduced in commit a02908f1. We weren't passing the chunk parameter down to the two subections, ext4_indirect_trans_blocks() and ext4_ext_index_trans_blocks(), with the result that massively overestimate the amount of credits needed by ext4_da_writepages, especially in the non-extents case. This causes failures especially on /boot partitions, which tend to be small and non-extent using since GRUB doesn't handle extents. This patch fixes the bug reported by Joseph Fannin at: http://bugzilla.kernel.org/show_bug.cgi?id=11964 Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 8dbf6953845..5a130b56f1c 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -4580,9 +4580,10 @@ static int ext4_indirect_trans_blocks(struct inode *inode, int nrblocks, static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk) { if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)) - return ext4_indirect_trans_blocks(inode, nrblocks, 0); - return ext4_ext_index_trans_blocks(inode, nrblocks, 0); + return ext4_indirect_trans_blocks(inode, nrblocks, chunk); + return ext4_ext_index_trans_blocks(inode, nrblocks, chunk); } + /* * Account for index blocks, block groups bitmaps and block group * descriptor blocks if modify datablocks and index blocks -- cgit v1.2.3-70-g09d2 From 47cb2ed9df2789fc4a3fe1201e475078f93c4839 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 6 Nov 2008 13:48:24 -0800 Subject: x86, xen: fix use of pgd_page now that it really does return a page Impact: fix 32-bit Xen guest boot crash On 32-bit PAE, pud_page, for no good reason, didn't really return a struct page *. Since Jan Beulich's fix "i386/PAE: fix pud_page()", pud_page does return a struct page *. Because PAE has 3 pagetable levels, the pud level is folded into the pgd level, so pgd_page() is the same as pud_page(), and now returns a struct page *. Update the xen/mmu.c code which uses pgd_page() accordingly. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/mmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index aba77b2b7d1..49697d86c6a 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -874,7 +874,7 @@ static void __xen_pgd_pin(struct mm_struct *mm, pgd_t *pgd) #else /* CONFIG_X86_32 */ #ifdef CONFIG_X86_PAE /* Need to make sure unshared kernel PMD is pinnable */ - xen_pin_page(mm, virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), + xen_pin_page(mm, pgd_page(pgd[pgd_index(TASK_SIZE)]), PT_PMD); #endif xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd))); @@ -991,7 +991,7 @@ static void __xen_pgd_unpin(struct mm_struct *mm, pgd_t *pgd) #ifdef CONFIG_X86_PAE /* Need to make sure unshared kernel PMD is unpinned */ - xen_unpin_page(mm, virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), + xen_unpin_page(mm, pgd_page(pgd[pgd_index(TASK_SIZE)]), PT_PMD); #endif -- cgit v1.2.3-70-g09d2 From fcef7836a31c6432b41a38867d413ed3d6aa8261 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 6 Nov 2008 12:05:21 -0800 Subject: alsa: fix snd_BUG_on() and friends sound/pci/pcxhr/pcxhr_core.c: In function 'pcxhr_set_pipe_cmd_params': sound/pci/pcxhr/pcxhr_core.c:700: warning: statement with no effect sound/pci/pcxhr/pcxhr_core.c:706: warning: statement with no effect sound/pci/pcxhr/pcxhr_core.c:710: warning: statement with no effect Due to try to fix this, and be more conventional about the empty stubs. Signed-off-by: Andrew Morton Signed-off-by: Takashi Iwai --- include/sound/core.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/include/sound/core.h b/include/sound/core.h index e5eec5f7350..7e558947268 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -388,9 +388,13 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...) #else /* !CONFIG_SND_DEBUG */ -#define snd_printd(fmt, args...) /* nothing */ -#define snd_BUG() /* nothing */ -#define snd_BUG_ON(cond) ({/*(void)(cond);*/ 0;}) /* always false */ +#define snd_printd(fmt, args...) do { } while (0) +#define snd_BUG() do { } while (0) +static inline int __snd_bug_on(void) +{ + return 0; +} +#define snd_BUG_ON(cond) __snd_bug_on() /* always false */ #endif /* CONFIG_SND_DEBUG */ -- cgit v1.2.3-70-g09d2 From ad93a765c1834db031b5bf1c2baf2a50d0462ca4 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Tue, 4 Nov 2008 14:52:55 -0700 Subject: ACPI: Disambiguate processor declaration type Declaring processors in ACPI namespace can be done using either a "Processor" definition or a "Device" definition (see section 8.4 - Declaring Processors; "Advanced Configuration and Power Interface Specification", Revision 3.0b). Currently the two processor declaration types are conflated. This patch disambiguates the processor declaration's definition type enabling subsequent code to behave uniquely based explicitly on the declaration's type. Signed-off-by: Myron Stowe Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 1 + drivers/acpi/scan.c | 2 +- include/acpi/acpi_drivers.h | 1 + 3 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 24a362f8034..0c670dd297d 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -89,6 +89,7 @@ static int acpi_processor_handle_eject(struct acpi_processor *pr); static const struct acpi_device_id processor_device_ids[] = { + {ACPI_PROCESSOR_OBJECT_HID, 0}, {ACPI_PROCESSOR_HID, 0}, {"", 0}, }; diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index a9dda8e0f9f..3fb6e2db585 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1043,7 +1043,7 @@ static void acpi_device_set_id(struct acpi_device *device, hid = ACPI_POWER_HID; break; case ACPI_BUS_TYPE_PROCESSOR: - hid = ACPI_PROCESSOR_HID; + hid = ACPI_PROCESSOR_OBJECT_HID; break; case ACPI_BUS_TYPE_SYSTEM: hid = ACPI_SYSTEM_HID; diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index cf04c6011c2..7469ff39763 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -41,6 +41,7 @@ */ #define ACPI_POWER_HID "LNXPOWER" +#define ACPI_PROCESSOR_OBJECT_HID "ACPI_CPU" #define ACPI_PROCESSOR_HID "ACPI0007" #define ACPI_SYSTEM_HID "LNXSYSTM" #define ACPI_THERMAL_HID "LNXTHERM" -- cgit v1.2.3-70-g09d2 From b26e9286fb438eb78bcdb68b67a3dbb8bc539125 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Tue, 4 Nov 2008 14:53:00 -0700 Subject: ACPI: Behave uniquely based on processor declaration definition type Associating a Local SAPIC with a processor object is dependent upon the processor object's definition type. CPUs declared as "Processor" should use the Local SAPIC's 'processor_id', and CPUs declared as "Device" should use the 'uid'. Note that for "Processor" declarations, even if a '_UID' child object exists, it has no bearing with respect to mapping Local SAPICs (see section 5.2.11.13 - Local SAPIC Structure; "Advanced Configuration and Power Interface Specification", Revision 3.0b). This patch changes the lsapic mapping logic to rely on the distinction of how the processor object was declared - the mapping can't just try both types of matches regardless of declaration type and rely on one failing as is currently being done. Signed-off-by: Myron Stowe Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 78 ++++++++++++++++++++++++------------------- 1 file changed, 44 insertions(+), 34 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 0c670dd297d..bc332fc28d7 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -410,7 +410,7 @@ static int acpi_processor_remove_fs(struct acpi_device *device) /* Use the acpiid in MADT to map cpus in case of SMP */ #ifndef CONFIG_SMP -static int get_cpu_id(acpi_handle handle, u32 acpi_id) {return -1;} +static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { return -1; } #else static struct acpi_table_madt *madt; @@ -429,27 +429,35 @@ static int map_lapic_id(struct acpi_subtable_header *entry, } static int map_lsapic_id(struct acpi_subtable_header *entry, - u32 acpi_id, int *apic_id) + int device_declaration, u32 acpi_id, int *apic_id) { struct acpi_madt_local_sapic *lsapic = (struct acpi_madt_local_sapic *)entry; + u32 tmp = (lsapic->id << 8) | lsapic->eid; + /* Only check enabled APICs*/ - if (lsapic->lapic_flags & ACPI_MADT_ENABLED) { - /* First check against id */ - if (lsapic->processor_id == acpi_id) { - *apic_id = (lsapic->id << 8) | lsapic->eid; - return 1; - /* Check against optional uid */ - } else if (entry->length >= 16 && - lsapic->uid == acpi_id) { - *apic_id = lsapic->uid; - return 1; - } - } + if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED)) + return 0; + + /* Device statement declaration type */ + if (device_declaration) { + if (entry->length < 16) + printk(KERN_ERR PREFIX + "Invalid LSAPIC with Device type processor (SAPIC ID %#x)\n", + tmp); + else if (lsapic->uid == acpi_id) + goto found; + /* Processor statement declaration type */ + } else if (lsapic->processor_id == acpi_id) + goto found; + return 0; +found: + *apic_id = tmp; + return 1; } -static int map_madt_entry(u32 acpi_id) +static int map_madt_entry(int type, u32 acpi_id) { unsigned long madt_end, entry; int apic_id = -1; @@ -470,7 +478,7 @@ static int map_madt_entry(u32 acpi_id) if (map_lapic_id(header, acpi_id, &apic_id)) break; } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) { - if (map_lsapic_id(header, acpi_id, &apic_id)) + if (map_lsapic_id(header, type, acpi_id, &apic_id)) break; } entry += header->length; @@ -478,7 +486,7 @@ static int map_madt_entry(u32 acpi_id) return apic_id; } -static int map_mat_entry(acpi_handle handle, u32 acpi_id) +static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; @@ -501,7 +509,7 @@ static int map_mat_entry(acpi_handle handle, u32 acpi_id) if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) { map_lapic_id(header, acpi_id, &apic_id); } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) { - map_lsapic_id(header, acpi_id, &apic_id); + map_lsapic_id(header, type, acpi_id, &apic_id); } exit: @@ -510,14 +518,14 @@ exit: return apic_id; } -static int get_cpu_id(acpi_handle handle, u32 acpi_id) +static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { int i; int apic_id = -1; - apic_id = map_mat_entry(handle, acpi_id); + apic_id = map_mat_entry(handle, type, acpi_id); if (apic_id == -1) - apic_id = map_madt_entry(acpi_id); + apic_id = map_madt_entry(type, acpi_id); if (apic_id == -1) return apic_id; @@ -533,15 +541,16 @@ static int get_cpu_id(acpi_handle handle, u32 acpi_id) Driver Interface -------------------------------------------------------------------------- */ -static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) +static int acpi_processor_get_info(struct acpi_device *device) { acpi_status status = 0; union acpi_object object = { 0 }; struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; - int cpu_index; + struct acpi_processor *pr; + int cpu_index, device_declaration = 0; static int cpu0_initialized; - + pr = acpi_driver_data(device); if (!pr) return -EINVAL; @@ -562,22 +571,23 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No bus mastering arbitration control\n")); - /* Check if it is a Device with HID and UID */ - if (has_uid) { + if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_HID)) { + /* + * Declared with "Device" statement; match _UID. + * Note that we don't handle string _UIDs yet. + */ unsigned long long value; status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID, NULL, &value); if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX "Evaluating processor _UID\n"); + printk(KERN_ERR PREFIX + "Evaluating processor _UID [%#x]\n", status); return -ENODEV; } + device_declaration = 1; pr->acpi_id = value; } else { - /* - * Evalute the processor object. Note that it is common on SMP to - * have the first (boot) processor with a valid PBLK address while - * all others have a NULL address. - */ + /* Declared with "Processor" statement; match ProcessorID */ status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer); if (ACPI_FAILURE(status)) { printk(KERN_ERR PREFIX "Evaluating processor object\n"); @@ -590,7 +600,7 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) */ pr->acpi_id = object.processor.proc_id; } - cpu_index = get_cpu_id(pr->handle, pr->acpi_id); + cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id); /* Handle UP system running SMP kernel, with no LAPIC in MADT */ if (!cpu0_initialized && (cpu_index == -1) && @@ -662,7 +672,7 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) pr = acpi_driver_data(device); - result = acpi_processor_get_info(pr, device->flags.unique_id); + result = acpi_processor_get_info(device); if (result) { /* Processor is physically not present */ return 0; -- cgit v1.2.3-70-g09d2 From 5b53ed69158eeff115004f246193d07a083445f6 Mon Sep 17 00:00:00 2001 From: Myron Stowe Date: Tue, 4 Nov 2008 14:53:05 -0700 Subject: ACPI: 80 column adherence and spelling fix (no functional change) Signed-off-by: Myron Stowe Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index bc332fc28d7..b57b1f05cb3 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -595,9 +595,10 @@ static int acpi_processor_get_info(struct acpi_device *device) } /* - * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. - * >>> 'acpi_get_processor_id(acpi_id, &id)' in arch/xxx/acpi.c - */ + * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP. + * >>> 'acpi_get_processor_id(acpi_id, &id)' in + * arch/xxx/acpi.c + */ pr->acpi_id = object.processor.proc_id; } cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id); -- cgit v1.2.3-70-g09d2 From d65dcdcf0cd55b4be1fd1f5025388e91042d63fc Mon Sep 17 00:00:00 2001 From: "Thomas, Sujith" Date: Wed, 5 Nov 2008 16:15:13 +0530 Subject: intel_menlow: Add comment documenting legal GTHS values Signed-off-by: Sujith Thomas Signed-off-by: Len Brown --- drivers/misc/intel_menlow.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/misc/intel_menlow.c b/drivers/misc/intel_menlow.c index 124b37ddb5c..27b7662955b 100644 --- a/drivers/misc/intel_menlow.c +++ b/drivers/misc/intel_menlow.c @@ -52,6 +52,11 @@ MODULE_LICENSE("GPL"); #define MEMORY_ARG_CUR_BANDWIDTH 1 #define MEMORY_ARG_MAX_BANDWIDTH 0 +/* + * GTHS returning 'n' would mean that [0,n-1] states are supported + * In that case max_cstate would be n-1 + * GTHS returning '0' would mean that no bandwidth control states are supported + */ static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev, unsigned long *max_state) { -- cgit v1.2.3-70-g09d2 From f4a9bc4c7de4cef83e86a7052eb2e88b193668e4 Mon Sep 17 00:00:00 2001 From: "Thomas, Sujith" Date: Wed, 5 Nov 2008 16:15:31 +0530 Subject: intel_menlow: MAINTAINERS Signed-off-by: Sujith Thomas Signed-off-by: Len Brown --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 16202c8ac68..808bb858da2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2178,6 +2178,13 @@ M: adaplas@gmail.com L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained +INTEL MENLOW THERMAL DRIVER +P: Sujith Thomas +M: sujith.thomas@intel.com +L: linux-acpi@vger.kernel.org +W: http://www.lesswatts.org/projects/acpi/ +S: Supported + INTEL IA32 MICROCODE UPDATE SUPPORT P: Tigran Aivazian M: tigran@aivazian.fsnet.co.uk -- cgit v1.2.3-70-g09d2 From d17cb18a07c587b8f9ff174a1bf6d03413eabe64 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 6 Nov 2008 20:51:59 -0500 Subject: Revert "ACPI: Ingore the RESET_REG_SUP bit when using ACPI reset mechanism" This reverts commit 8fd145917fb62368a9b80db59562c20576238f5a. http://bugzilla.kernel.org/show_bug.cgi?id=11942 Signed-off-by: Len Brown --- drivers/acpi/reboot.c | 25 +++---------------------- 1 file changed, 3 insertions(+), 22 deletions(-) diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c index 755baf2ca70..a6b662c00b6 100644 --- a/drivers/acpi/reboot.c +++ b/drivers/acpi/reboot.c @@ -15,28 +15,9 @@ void acpi_reboot(void) rr = &acpi_gbl_FADT.reset_register; - /* - * Is the ACPI reset register supported? - * - * According to ACPI 3.0, FADT.flags.RESET_REG_SUP indicates - * whether the ACPI reset mechanism is supported. - * - * However, some boxes have this bit clear, yet a valid - * ACPI_RESET_REG & RESET_VALUE, and ACPI reboot is the only - * mechanism that works for them after S3. - * - * This suggests that other operating systems may not be checking - * the RESET_REG_SUP bit, and are using other means to decide - * whether to use the ACPI reboot mechanism or not. - * - * So when acpi reboot is requested, - * only the reset_register is checked. If the following - * conditions are met, it indicates that the reset register is supported. - * a. reset_register is not zero - * b. the access width is eight - * c. the bit_offset is zero - */ - if (!(rr->address) || rr->bit_width != 8 || rr->bit_offset != 0) + /* Is the reset register supported? */ + if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) || + rr->bit_width != 8 || rr->bit_offset != 0) return; reset_value = acpi_gbl_FADT.reset_value; -- cgit v1.2.3-70-g09d2 From 2d59f6a73e1cb4415cdd5a0083b1196cceffa275 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 1 Aug 2008 10:01:12 -0600 Subject: PNP: add Bjorn Helgaas as PNP co-maintainer Update Adam's email address and add myself as PNP co-maintainer. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- MAINTAINERS | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 808bb858da2..5cf74926d93 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3336,7 +3336,9 @@ S: Maintained PNP SUPPORT P: Adam Belay -M: ambx1@neo.rr.com +M: abelay@mit.edu +P: Bjorn Helgaas +M: bjorn.helgaas@hp.com S: Maintained PNXxxxx I2C DRIVER -- cgit v1.2.3-70-g09d2 From 0794469da3f7b2093575cbdfc1108308dd3641ce Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 30 Oct 2008 01:18:59 +0100 Subject: ACPI: struct device - replace bus_id with dev_name(), dev_set_name() This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation. Acked-by: Greg Kroah-Hartman Signed-Off-By: Kay Sievers Signed-off-by: Len Brown --- drivers/acpi/ac.c | 2 +- drivers/acpi/battery.c | 2 +- drivers/acpi/processor_core.c | 6 +++--- drivers/acpi/scan.c | 8 ++++---- drivers/acpi/sleep/proc.c | 4 ++-- drivers/acpi/thermal.c | 8 ++++---- drivers/acpi/wmi.c | 2 +- 7 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index d72a1b6c8a9..2d467326d9e 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -242,7 +242,7 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data) acpi_ac_get_state(ac); acpi_bus_generate_proc_event(device, event, (u32) ac->state); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, + dev_name(&device->dev), event, (u32) ac->state); #ifdef CONFIG_ACPI_SYSFS_POWER kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE); diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index b2133e89ad9..e68f2187ed6 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -782,7 +782,7 @@ static void acpi_battery_notify(acpi_handle handle, u32 event, void *data) acpi_bus_generate_proc_event(device, event, acpi_battery_present(battery)); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, + dev_name(&device->dev), event, acpi_battery_present(battery)); #ifdef CONFIG_ACPI_SYSFS_POWER /* acpi_batter_update could remove power_supply object */ diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 24a362f8034..cf7e8856a4c 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -761,20 +761,20 @@ static void acpi_processor_notify(acpi_handle handle, u32 event, void *data) acpi_bus_generate_proc_event(device, event, pr->performance_platform_limit); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, + dev_name(&device->dev), event, pr->performance_platform_limit); break; case ACPI_PROCESSOR_NOTIFY_POWER: acpi_processor_cst_has_changed(pr); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); break; case ACPI_PROCESSOR_NOTIFY_THROTTLING: acpi_processor_tstate_has_changed(pr); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported event [0x%x]\n", event)); diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index a9dda8e0f9f..4dd1f31930b 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -109,8 +109,7 @@ static int acpi_bus_hot_remove_device(void *context) return 0; ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Hot-removing device %s...\n", device->dev.bus_id)); - + "Hot-removing device %s...\n", dev_name(&device->dev))); if (acpi_bus_trim(device, 1)) { printk(KERN_ERR PREFIX @@ -460,7 +459,7 @@ static int acpi_device_register(struct acpi_device *device, acpi_device_bus_id->instance_no = 0; list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list); } - sprintf(device->dev.bus_id, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no); + dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no); if (device->parent) { list_add_tail(&device->node, &device->parent->children); @@ -484,7 +483,8 @@ static int acpi_device_register(struct acpi_device *device, result = acpi_device_setup_files(device); if(result) - printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", device->dev.bus_id); + printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n", + dev_name(&device->dev)); device->removal_type = ACPI_BUS_REMOVAL_NORMAL; return 0; diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 631ee2ee2ca..64e591ba86f 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -366,8 +366,8 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) dev->wakeup.state.enabled ? "enabled" : "disabled"); if (ldev) seq_printf(seq, "%s:%s", - ldev->bus ? ldev->bus->name : "no-bus", - ldev->bus_id); + dev_name(ldev) ? ldev->bus->name : "no-bus", + dev_name(ldev)); seq_printf(seq, "\n"); put_device(ldev); diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index ad6cae938f0..462b1687885 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -576,7 +576,7 @@ static int acpi_thermal_critical(struct acpi_thermal *tz) acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled); acpi_bus_generate_netlink_event(tz->device->pnp.device_class, - tz->device->dev.bus_id, + dev_name(&tz->device->dev), ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled); @@ -605,7 +605,7 @@ static int acpi_thermal_hot(struct acpi_thermal *tz) acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT, tz->trips.hot.flags.enabled); acpi_bus_generate_netlink_event(tz->device->pnp.device_class, - tz->device->dev.bus_id, + dev_name(&tz->device->dev), ACPI_THERMAL_NOTIFY_HOT, tz->trips.hot.flags.enabled); @@ -1592,14 +1592,14 @@ static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data) acpi_thermal_check(tz); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); break; case ACPI_THERMAL_NOTIFY_DEVICES: acpi_thermal_trips_update(tz, ACPI_TRIPS_REFRESH_DEVICES); acpi_thermal_check(tz); acpi_bus_generate_proc_event(device, event, 0); acpi_bus_generate_netlink_event(device->pnp.device_class, - device->dev.bus_id, event, 0); + dev_name(&device->dev), event, 0); break; default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c index 47cd7baf9b1..8a8b377712c 100644 --- a/drivers/acpi/wmi.c +++ b/drivers/acpi/wmi.c @@ -660,7 +660,7 @@ static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data) wblock->handler(event, wblock->handler_data); acpi_bus_generate_netlink_event( - device->pnp.device_class, device->dev.bus_id, + device->pnp.device_class, dev_name(&device->dev), event, 0); break; } -- cgit v1.2.3-70-g09d2 From afeb12b7478fee31888e7c34804bee2f658e7765 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 29 Oct 2008 14:13:20 -0700 Subject: fujitsu-laptop: fix section mismatch warning Could fix a bug in a hotplug add scenario. WARNING: drivers/misc/fujitsu-laptop.o(.text+0xbde): Section mismatch in reference from the function acpi_fujitsu_add() to the variable .init.data:fujitsu_dmi_table The function acpi_fujitsu_add() references the variable __initdata fujitsu_dmi_table. This is often because acpi_fujitsu_add lacks a __initdata annotation or the annotation of fujitsu_dmi_table is wrong. Signed-off-by: Randy Dunlap Acked-by: Jonathan Woithe Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/misc/fujitsu-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index d2cf0bfe316..9124fcdc4d0 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -473,7 +473,7 @@ static int dmi_check_cb_p8010(const struct dmi_system_id *id) return 0; } -static struct dmi_system_id __initdata fujitsu_dmi_table[] = { +static struct dmi_system_id fujitsu_dmi_table[] = { { .ident = "Fujitsu Siemens S6410", .matches = { -- cgit v1.2.3-70-g09d2 From 14a63ba821ac2a0f5166789b31241c0b7eb147d9 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 29 Oct 2008 14:13:22 -0700 Subject: ACPI: use macro to replace hard number Impact: cleanup Use MACRO for rev 3 fadt id instead of 3 directly. Signed-off-by: Yinghai Lu Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/tables/tbfadt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c index 2c7885e7ffb..2817158fb6a 100644 --- a/drivers/acpi/tables/tbfadt.c +++ b/drivers/acpi/tables/tbfadt.c @@ -304,7 +304,7 @@ static void acpi_tb_convert_fadt(void) * The ACPI 1.0 reserved fields that will be zeroed are the bytes located at * offset 45, 55, 95, and the word located at offset 109, 110. */ - if (acpi_gbl_FADT.header.revision < 3) { + if (acpi_gbl_FADT.header.revision < FADT2_REVISION_ID) { acpi_gbl_FADT.preferred_profile = 0; acpi_gbl_FADT.pstate_control = 0; acpi_gbl_FADT.cst_control = 0; -- cgit v1.2.3-70-g09d2 From 4feba70a2c1a1a0c96909f657f48b2e11e682370 Mon Sep 17 00:00:00 2001 From: Peter Gruber Date: Mon, 27 Oct 2008 23:59:36 -0400 Subject: ACPI: avoid empty file name in sysfs Since commit bc45b1d39a925b56796bebf8a397a0491489d85c acpi tables are allowed to have an empty signature and /sys/firmware/acpi/tables uses the signature as filename. Applications using naive recursion through /sys loop forever. A possible solution would be: (replacing the zero length filename with the string "NULL") http://bugzilla.kernel.org/show_bug.cgi?id=11539 Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/system.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 1d74171b794..62ec75e7912 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -78,9 +78,15 @@ static ssize_t acpi_table_show(struct kobject *kobj, container_of(bin_attr, struct acpi_table_attr, attr); struct acpi_table_header *table_header = NULL; acpi_status status; + char name[ACPI_NAME_SIZE]; + + if (strncmp(table_attr->name, "NULL", 4)) + memcpy(name, table_attr->name, ACPI_NAME_SIZE); + else + memcpy(name, "\0\0\0\0", 4); status = - acpi_get_table(table_attr->name, table_attr->instance, + acpi_get_table(name, table_attr->instance, &table_header); if (ACPI_FAILURE(status)) return -ENODEV; @@ -95,21 +101,24 @@ static void acpi_table_attr_init(struct acpi_table_attr *table_attr, struct acpi_table_header *header = NULL; struct acpi_table_attr *attr = NULL; - memcpy(table_attr->name, table_header->signature, ACPI_NAME_SIZE); + if (table_header->signature[0] != '\0') + memcpy(table_attr->name, table_header->signature, + ACPI_NAME_SIZE); + else + memcpy(table_attr->name, "NULL", 4); list_for_each_entry(attr, &acpi_table_attr_list, node) { - if (!memcmp(table_header->signature, attr->name, - ACPI_NAME_SIZE)) + if (!memcmp(table_attr->name, attr->name, ACPI_NAME_SIZE)) if (table_attr->instance < attr->instance) table_attr->instance = attr->instance; } table_attr->instance++; if (table_attr->instance > 1 || (table_attr->instance == 1 && - !acpi_get_table(table_header-> - signature, 2, - &header))) - sprintf(table_attr->name + 4, "%d", table_attr->instance); + !acpi_get_table + (table_header->signature, 2, &header))) + sprintf(table_attr->name + ACPI_NAME_SIZE, "%d", + table_attr->instance); table_attr->attr.size = 0; table_attr->attr.read = acpi_table_show; -- cgit v1.2.3-70-g09d2 From 70e90679ffce0937deb77e2bd8bd918a24a897fd Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 6 Nov 2008 23:08:37 -0800 Subject: af_key: mark policy as dead before destroying xfrm_policy_destroy() will oops if not dead policy is passed to it. On error path in pfkey_compile_policy() exactly this happens. Oopsable for CAP_NET_ADMIN owners. Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- net/key/af_key.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/key/af_key.c b/net/key/af_key.c index 3440a4637f0..5b22e011653 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -3188,6 +3188,7 @@ static struct xfrm_policy *pfkey_compile_policy(struct sock *sk, int opt, return xp; out: + xp->walk.dead = 1; xfrm_policy_destroy(xp); return NULL; } -- cgit v1.2.3-70-g09d2 From c1adbb9681c30e984272b66623c4d5774b3981e1 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Wed, 5 Nov 2008 16:53:50 +0200 Subject: mlx4_en: Start port error flow bug fix Tried to deactivate rx ring that wasn't activated, used wrong index. Signed-off-by: Yevgeny Petrilin Signed-off-by: Jeff Garzik --- drivers/net/mlx4/en_netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index a339afbeed3..a3f732418c4 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -706,7 +706,7 @@ tx_err: mlx4_en_release_rss_steer(priv); rx_err: for (i = 0; i < priv->rx_ring_num; i++) - mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[rx_index]); + mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]); cq_err: while (rx_index--) mlx4_en_deactivate_cq(priv, &priv->rx_cq[rx_index]); -- cgit v1.2.3-70-g09d2 From db053c6b447d083f3c63e5540b70a3e521b468ca Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Tue, 4 Nov 2008 13:32:31 +0200 Subject: hso: rfkill type should be WWAN Signed-off-by: Paulius Zaleckas Cc: Denis Joseph Barrow Signed-off-by: Jeff Garzik --- drivers/net/usb/hso.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 1164c52e2c0..3f49e8382dd 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2188,7 +2188,7 @@ static void hso_create_rfkill(struct hso_device *hso_dev, char *rfkn; hso_net->rfkill = rfkill_allocate(&interface_to_usbdev(interface)->dev, - RFKILL_TYPE_WLAN); + RFKILL_TYPE_WWAN); if (!hso_net->rfkill) { dev_err(dev, "%s - Out of memory", __func__); return; -- cgit v1.2.3-70-g09d2 From 08809b25cf64a7d8deb336b779e527e88830eac9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 1 Nov 2008 18:20:19 +0000 Subject: el3_common_init() should be __devinit, not __init Signed-off-by: Al Viro Signed-off-by: Jeff Garzik --- drivers/net/3c509.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index 3a7bc524af3..c7a4f3bcc2b 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -94,7 +94,7 @@ #include #include -static char version[] __initdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n"; +static char version[] __devinitdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n"; #ifdef EL3_DEBUG static int el3_debug = EL3_DEBUG; @@ -186,7 +186,7 @@ static int max_interrupt_work = 10; static int nopnp; #endif -static int __init el3_common_init(struct net_device *dev); +static int __devinit el3_common_init(struct net_device *dev); static void el3_common_remove(struct net_device *dev); static ushort id_read_eeprom(int index); static ushort read_eeprom(int ioaddr, int index); @@ -537,7 +537,7 @@ static struct mca_driver el3_mca_driver = { static int mca_registered; #endif /* CONFIG_MCA */ -static int __init el3_common_init(struct net_device *dev) +static int __devinit el3_common_init(struct net_device *dev) { struct el3_private *lp = netdev_priv(dev); int err; -- cgit v1.2.3-70-g09d2 From cd17fa7b8f1dd24b23c464ebcb14e7c058e15097 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 3 Nov 2008 23:08:04 +0000 Subject: sfc: Correct address of gPXE boot configuration in EEPROM Due to a hardware bug, the originally assigned range cannot reliably be used for boot configuration and must not be modifiable through ethtool. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik --- drivers/net/sfc/ethtool.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index fa98af58223..cd0d0873d97 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -174,8 +174,8 @@ static struct efx_ethtool_stat efx_ethtool_stats[] = { /* EEPROM range with gPXE configuration */ #define EFX_ETHTOOL_EEPROM_MAGIC 0xEFAB -#define EFX_ETHTOOL_EEPROM_MIN 0x100U -#define EFX_ETHTOOL_EEPROM_MAX 0x400U +#define EFX_ETHTOOL_EEPROM_MIN 0x800U +#define EFX_ETHTOOL_EEPROM_MAX 0x1800U /************************************************************************** * -- cgit v1.2.3-70-g09d2 From 939a9516416ad8ccec27aa05bd19236c550c0c03 Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Tue, 4 Nov 2008 07:51:38 +0000 Subject: [netdrvr] usb/hso: Cleanup rfkill error handling Yup, this appears to be the problem, thanks. I think &hso_net->net->dev is more intuitive for the error message, so I've used that. I've also added missing line endings on the error messages and set our local rfkill structure element to NULL on failure so we don't try to call rfkill_unregister on driver removal if we failed to register at all. The patch below Works For Me (TM); the device is detected fine, can be removed without problems and connects ok. I'll have a prod at why the rfkill stuff isn't working next, but I believe this cleanup of the error handling is appropriate no matter what the issue with registration is. Signed-Off-By: Jonathan McDowell Signed-off-by: Jeff Garzik --- drivers/net/usb/hso.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 3f49e8382dd..8e90891f0e4 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -2184,19 +2184,20 @@ static void hso_create_rfkill(struct hso_device *hso_dev, struct usb_interface *interface) { struct hso_net *hso_net = dev2net(hso_dev); - struct device *dev = hso_dev->dev; + struct device *dev = &hso_net->net->dev; char *rfkn; hso_net->rfkill = rfkill_allocate(&interface_to_usbdev(interface)->dev, RFKILL_TYPE_WWAN); if (!hso_net->rfkill) { - dev_err(dev, "%s - Out of memory", __func__); + dev_err(dev, "%s - Out of memory\n", __func__); return; } rfkn = kzalloc(20, GFP_KERNEL); if (!rfkn) { rfkill_free(hso_net->rfkill); - dev_err(dev, "%s - Out of memory", __func__); + hso_net->rfkill = NULL; + dev_err(dev, "%s - Out of memory\n", __func__); return; } snprintf(rfkn, 20, "hso-%d", @@ -2209,7 +2210,8 @@ static void hso_create_rfkill(struct hso_device *hso_dev, kfree(rfkn); hso_net->rfkill->name = NULL; rfkill_free(hso_net->rfkill); - dev_err(dev, "%s - Failed to register rfkill", __func__); + hso_net->rfkill = NULL; + dev_err(dev, "%s - Failed to register rfkill\n", __func__); return; } } -- cgit v1.2.3-70-g09d2 From 9b46333406b9cb3397ab538485a4d57c316af0ff Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 28 Oct 2008 19:22:34 +1100 Subject: vmap: cope with vm_unmap_aliases before vmalloc_init() Xen can end up calling vm_unmap_aliases() before vmalloc_init() has been called. In this case its safe to make it a simple no-op. Signed-off-by: Jeremy Fitzhardinge Cc: Linux Memory Management List Cc: Nick Piggin Signed-off-by: Ingo Molnar --- mm/vmalloc.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 66fad3fc02b..ba6b0f5f7fa 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -592,6 +592,8 @@ static void free_unmap_vmap_area_addr(unsigned long addr) #define VMAP_BLOCK_SIZE (VMAP_BBMAP_BITS * PAGE_SIZE) +static bool vmap_initialized __read_mostly = false; + struct vmap_block_queue { spinlock_t lock; struct list_head free; @@ -828,6 +830,9 @@ void vm_unmap_aliases(void) int cpu; int flush = 0; + if (unlikely(!vmap_initialized)) + return; + for_each_possible_cpu(cpu) { struct vmap_block_queue *vbq = &per_cpu(vmap_block_queue, cpu); struct vmap_block *vb; @@ -942,6 +947,8 @@ void __init vmalloc_init(void) INIT_LIST_HEAD(&vbq->dirty); vbq->nr_dirty = 0; } + + vmap_initialized = true; } void unmap_kernel_range(unsigned long addr, unsigned long size) -- cgit v1.2.3-70-g09d2 From d05fdf316067cd311d5e7add08da26ded8a58080 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 28 Oct 2008 19:23:06 +1100 Subject: xen: make sure stray alias mappings are gone before pinning Xen requires that all mappings of pagetable pages are read-only, so that they can't be updated illegally. As a result, if a page is being turned into a pagetable page, we need to make sure all its mappings are RO. If the page had been used for ioremap or vmalloc, it may still have left over mappings as a result of not having been lazily unmapped. This change makes sure we explicitly mop them all up before pinning the page. Unlike aliases created by kmap, the there can be vmalloc aliases even for non-high pages, so we must do the flush unconditionally. Signed-off-by: Jeremy Fitzhardinge Cc: Linux Memory Management List Cc: Nick Piggin Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 5 +++-- arch/x86/xen/mmu.c | 9 ++++++--- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index b61534c7a4c..5e4686d70f6 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -863,15 +863,16 @@ static void xen_alloc_ptpage(struct mm_struct *mm, unsigned long pfn, unsigned l if (PagePinned(virt_to_page(mm->pgd))) { SetPagePinned(page); + vm_unmap_aliases(); if (!PageHighMem(page)) { make_lowmem_page_readonly(__va(PFN_PHYS((unsigned long)pfn))); if (level == PT_PTE && USE_SPLIT_PTLOCKS) pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn); - } else + } else { /* make sure there are no stray mappings of this page */ kmap_flush_unused(); - vm_unmap_aliases(); + } } } diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index aba77b2b7d1..89f3b6edc65 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -850,13 +850,16 @@ static int xen_pin_page(struct mm_struct *mm, struct page *page, read-only, and can be pinned. */ static void __xen_pgd_pin(struct mm_struct *mm, pgd_t *pgd) { + vm_unmap_aliases(); + xen_mc_batch(); - if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) { - /* re-enable interrupts for kmap_flush_unused */ + if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) { + /* re-enable interrupts for flushing */ xen_mc_issue(0); + kmap_flush_unused(); - vm_unmap_aliases(); + xen_mc_batch(); } -- cgit v1.2.3-70-g09d2 From cd83e42c6b0413dcbb548c2ead799111ff7e6a13 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 7 Nov 2008 11:12:29 +1100 Subject: cpumask: new API, v2 - add cpumask_of() - add free_bootmem_cpumask_var() Signed-off-by: Rusty Russell Signed-off-by: Ingo Molnar --- include/linux/cpumask.h | 11 +++++++++++ lib/cpumask.c | 5 +++++ 2 files changed, 16 insertions(+) diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index c8e66619097..31caa1bc620 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -893,6 +893,12 @@ static inline void cpumask_copy(struct cpumask *dstp, */ #define cpumask_any_and(mask1, mask2) cpumask_first_and((mask1), (mask2)) +/** + * cpumask_of - the cpumask containing just a given cpu + * @cpu: the cpu (<= nr_cpu_ids) + */ +#define cpumask_of(cpu) (get_cpu_mask(cpu)) + /** * to_cpumask - convert an NR_CPUS bitmap to a struct cpumask * * @bitmap: the bitmap @@ -946,6 +952,7 @@ typedef struct cpumask *cpumask_var_t; bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags); void alloc_bootmem_cpumask_var(cpumask_var_t *mask); void free_cpumask_var(cpumask_var_t mask); +void free_bootmem_cpumask_var(cpumask_var_t mask); #else typedef struct cpumask cpumask_var_t[1]; @@ -962,6 +969,10 @@ static inline void alloc_bootmem_cpumask_var(cpumask_var_t *mask) static inline void free_cpumask_var(cpumask_var_t mask) { } + +static inline void free_bootmem_cpumask_var(cpumask_var_t mask) +{ +} #endif /* CONFIG_CPUMASK_OFFSTACK */ /* The pointer versions of the maps, these will become the primary versions. */ diff --git a/lib/cpumask.c b/lib/cpumask.c index 5ceb4211c83..2ebc3a9a746 100644 --- a/lib/cpumask.c +++ b/lib/cpumask.c @@ -107,4 +107,9 @@ void free_cpumask_var(cpumask_var_t mask) kfree(mask); } EXPORT_SYMBOL(free_cpumask_var); + +void free_bootmem_cpumask_var(cpumask_var_t mask) +{ + free_bootmem((unsigned long)mask, cpumask_size()); +} #endif -- cgit v1.2.3-70-g09d2 From ed9b3e3379731e9f9d2f73f3d7fd9e7d2ce3df4a Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 7 Nov 2008 09:06:45 -0500 Subject: ext4: Mark the buffer_heads as dirty and uptodate after prepare_write We need to make sure we mark the buffer_heads as dirty and uptodate so that block_write_full_page write them correctly. This fixes mmap corruptions that can occur in low memory situations. Signed-off-by: Aneesh Kumar K.V Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 5a130b56f1c..be21a5ae33c 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2329,6 +2329,8 @@ static int ext4_da_writepage(struct page *page, unlock_page(page); return 0; } + /* now mark the buffer_heads as dirty and uptodate */ + block_commit_write(page, 0, PAGE_CACHE_SIZE); } if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode)) -- cgit v1.2.3-70-g09d2 From 23712a9c28b9f80a8cf70c8490358d5f562d2465 Mon Sep 17 00:00:00 2001 From: Frederic Bohe Date: Fri, 7 Nov 2008 09:21:01 -0500 Subject: ext4: add checksum calculation when clearing UNINIT flag in ext4_new_inode When initializing an uninitialized block group in ext4_new_inode(), its block group checksum must be re-calculated. This fixes a race when several threads try to allocate a new inode in an UNINIT'd group. There is some question whether we need to be initializing the block bitmap in ext4_new_inode() at all, but for now, if we are going to init the block group, let's eliminate the race. Signed-off-by: Frederic Bohe Signed-off-by: "Theodore Ts'o" --- fs/ext4/ialloc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index fe34d74cfb1..2a117e286e5 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -718,6 +718,8 @@ got: gdp->bg_flags &= cpu_to_le16(~EXT4_BG_BLOCK_UNINIT); free = ext4_free_blocks_after_init(sb, group, gdp); gdp->bg_free_blocks_count = cpu_to_le16(free); + gdp->bg_checksum = ext4_group_desc_csum(sbi, group, + gdp); } spin_unlock(sb_bgl_lock(sbi, group)); -- cgit v1.2.3-70-g09d2 From 14800984706bf6936bbec5187f736e928be5c218 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Fri, 7 Nov 2008 15:26:50 +0100 Subject: sched: fine-tune SD_MC_INIT Tune SD_MC_INIT the same way as SD_CPU_INIT: unset SD_BALANCE_NEWIDLE, and set SD_WAKE_BALANCE. This improves vmark by 5%: vmark 132102 125968 125497 messages/sec avg 127855.66 .984 vmark 139404 131719 131272 messages/sec avg 134131.66 1.033 Signed-off-by: Mike Galbraith Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar # *DOCUMENTATION* --- include/linux/topology.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/topology.h b/include/linux/topology.h index 34a7ee0ebed..a8d840595b7 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -120,10 +120,10 @@ void arch_update_cpu_topology(void); .wake_idx = 1, \ .forkexec_idx = 1, \ .flags = SD_LOAD_BALANCE \ - | SD_BALANCE_NEWIDLE \ | SD_BALANCE_FORK \ | SD_BALANCE_EXEC \ | SD_WAKE_AFFINE \ + | SD_WAKE_BALANCE \ | SD_SHARE_PKG_RESOURCES\ | BALANCE_FOR_MC_POWER, \ .last_balance = jiffies, \ -- cgit v1.2.3-70-g09d2 From 52c642f33b14bfa1b00ef2b68296effb34a573f3 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 7 Nov 2008 16:09:23 +0100 Subject: sched: fine-tune SD_SIBLING_INIT fine-tune the HT sched-domains parameters as well. On a HT capable box, this increases lat_ctx performance from 23.87 usecs to 1.49 usecs: # before $ ./lat_ctx -s 0 2 "size=0k ovr=1.89 2 23.87 # after $ ./lat_ctx -s 0 2 "size=0k ovr=1.84 2 1.49 Signed-off-by: Ingo Molnar --- include/linux/topology.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/topology.h b/include/linux/topology.h index a8d840595b7..117f1b7405c 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -99,7 +99,7 @@ void arch_update_cpu_topology(void); | SD_BALANCE_FORK \ | SD_BALANCE_EXEC \ | SD_WAKE_AFFINE \ - | SD_WAKE_IDLE \ + | SD_WAKE_BALANCE \ | SD_SHARE_CPUPOWER, \ .last_balance = jiffies, \ .balance_interval = 1, \ -- cgit v1.2.3-70-g09d2 From 8638545c3668231675dcf8f46afa7ed5930a6b02 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 7 Nov 2008 16:03:46 +0000 Subject: trivial: dmi_scan typo As we've lost our trivial maintainer for the moment I'll send this directly. Only touches a comment Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/firmware/dmi_scan.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 3e526b6d00c..8daf4793ac3 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -81,9 +81,9 @@ static void dmi_table(u8 *buf, int len, int num, const struct dmi_header *dm = (const struct dmi_header *)data; /* - * We want to know the total length (formated area and strings) - * before decoding to make sure we won't run off the table in - * dmi_decode or dmi_string + * We want to know the total length (formatted area and + * strings) before decoding to make sure we won't run off the + * table in dmi_decode or dmi_string */ data += dm->length; while ((data - buf < len - 1) && (data[0] || data[1])) -- cgit v1.2.3-70-g09d2 From 54e7ff9d6249ba88e393d7fbc8008da9279723be Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 7 Nov 2008 16:07:02 +0000 Subject: trivial: MPT fusion - remove long dead code This triggers false bug reports as it does a bogus kmalloc with locks held but is never really compiled into the kernel. Closes #8329 Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/message/fusion/mptlan.c | 108 ---------------------------------------- 1 file changed, 108 deletions(-) diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c index a1abf95cf75..603ffd008c7 100644 --- a/drivers/message/fusion/mptlan.c +++ b/drivers/message/fusion/mptlan.c @@ -77,12 +77,6 @@ MODULE_VERSION(my_VERSION); * Fusion MPT LAN private structures */ -struct NAA_Hosed { - u16 NAA; - u8 ieee[FC_ALEN]; - struct NAA_Hosed *next; -}; - struct BufferControl { struct sk_buff *skb; dma_addr_t dma; @@ -159,11 +153,6 @@ static u8 LanCtx = MPT_MAX_PROTOCOL_DRIVERS; static u32 max_buckets_out = 127; static u32 tx_max_out_p = 127 - 16; -#ifdef QLOGIC_NAA_WORKAROUND -static struct NAA_Hosed *mpt_bad_naa = NULL; -DEFINE_RWLOCK(bad_naa_lock); -#endif - /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /** * lan_reply - Handle all data sent from the hardware. @@ -780,30 +769,6 @@ mpt_lan_sdu_send (struct sk_buff *skb, struct net_device *dev) // ctx, skb, skb->data)); mac = skb_mac_header(skb); -#ifdef QLOGIC_NAA_WORKAROUND -{ - struct NAA_Hosed *nh; - - /* Munge the NAA for Tx packets to QLogic boards, which don't follow - RFC 2625. The longer I look at this, the more my opinion of Qlogic - drops. */ - read_lock_irq(&bad_naa_lock); - for (nh = mpt_bad_naa; nh != NULL; nh=nh->next) { - if ((nh->ieee[0] == mac[0]) && - (nh->ieee[1] == mac[1]) && - (nh->ieee[2] == mac[2]) && - (nh->ieee[3] == mac[3]) && - (nh->ieee[4] == mac[4]) && - (nh->ieee[5] == mac[5])) { - cur_naa = nh->NAA; - dlprintk ((KERN_INFO "mptlan/sdu_send: using NAA value " - "= %04x.\n", cur_naa)); - break; - } - } - read_unlock_irq(&bad_naa_lock); -} -#endif pTrans->TransactionDetails[0] = cpu_to_le32((cur_naa << 16) | (mac[0] << 8) | @@ -1572,79 +1537,6 @@ mpt_lan_type_trans(struct sk_buff *skb, struct net_device *dev) fcllc = (struct fcllc *)skb->data; -#ifdef QLOGIC_NAA_WORKAROUND -{ - u16 source_naa = fch->stype, found = 0; - - /* Workaround for QLogic not following RFC 2625 in regards to the NAA - value. */ - - if ((source_naa & 0xF000) == 0) - source_naa = swab16(source_naa); - - if (fcllc->ethertype == htons(ETH_P_ARP)) - dlprintk ((KERN_INFO "mptlan/type_trans: got arp req/rep w/ naa of " - "%04x.\n", source_naa)); - - if ((fcllc->ethertype == htons(ETH_P_ARP)) && - ((source_naa >> 12) != MPT_LAN_NAA_RFC2625)){ - struct NAA_Hosed *nh, *prevnh; - int i; - - dlprintk ((KERN_INFO "mptlan/type_trans: ARP Req/Rep from " - "system with non-RFC 2625 NAA value (%04x).\n", - source_naa)); - - write_lock_irq(&bad_naa_lock); - for (prevnh = nh = mpt_bad_naa; nh != NULL; - prevnh=nh, nh=nh->next) { - if ((nh->ieee[0] == fch->saddr[0]) && - (nh->ieee[1] == fch->saddr[1]) && - (nh->ieee[2] == fch->saddr[2]) && - (nh->ieee[3] == fch->saddr[3]) && - (nh->ieee[4] == fch->saddr[4]) && - (nh->ieee[5] == fch->saddr[5])) { - found = 1; - dlprintk ((KERN_INFO "mptlan/type_trans: ARP Re" - "q/Rep w/ bad NAA from system already" - " in DB.\n")); - break; - } - } - - if ((!found) && (nh == NULL)) { - - nh = kmalloc(sizeof(struct NAA_Hosed), GFP_KERNEL); - dlprintk ((KERN_INFO "mptlan/type_trans: ARP Req/Rep w/" - " bad NAA from system not yet in DB.\n")); - - if (nh != NULL) { - nh->next = NULL; - if (!mpt_bad_naa) - mpt_bad_naa = nh; - if (prevnh) - prevnh->next = nh; - - nh->NAA = source_naa; /* Set the S_NAA value. */ - for (i = 0; i < FC_ALEN; i++) - nh->ieee[i] = fch->saddr[i]; - dlprintk ((KERN_INFO "Got ARP from %02x:%02x:%02x:%02x:" - "%02x:%02x with non-compliant S_NAA value.\n", - fch->saddr[0], fch->saddr[1], fch->saddr[2], - fch->saddr[3], fch->saddr[4],fch->saddr[5])); - } else { - printk (KERN_ERR "mptlan/type_trans: Unable to" - " kmalloc a NAA_Hosed struct.\n"); - } - } else if (!found) { - printk (KERN_ERR "mptlan/type_trans: found not" - " set, but nh isn't null. Evil " - "funkiness abounds.\n"); - } - write_unlock_irq(&bad_naa_lock); - } -} -#endif /* Strip the SNAP header from ARP packets since we don't * pass them through to the 802.2/SNAP layers. -- cgit v1.2.3-70-g09d2 From 7c64ade53a6f977d73f16243865c42ceae999aea Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 7 Nov 2008 14:02:49 +0100 Subject: oprofile: Fix p6 counter overflow check Fix the counter overflow check for CPUs with counter width > 32 I had a similar change in a different patch that I didn't submit and I didn't notice the problem earlier because it was always tested together. Signed-off-by: Andi Kleen Signed-off-by: Robert Richter --- arch/x86/oprofile/op_model_ppro.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c index 0620d6d45f7..3f1b81a83e2 100644 --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -27,8 +27,7 @@ static int num_counters = 2; static int counter_width = 32; #define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0) -#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0) -#define CTR_OVERFLOWED(n) (!((n) & (1U<<(counter_width-1)))) +#define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1)))) #define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0) #define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0) @@ -124,14 +123,14 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) static int ppro_check_ctrs(struct pt_regs * const regs, struct op_msrs const * const msrs) { - unsigned int low, high; + u64 val; int i; for (i = 0 ; i < num_counters; ++i) { if (!reset_value[i]) continue; - CTR_READ(low, high, msrs, i); - if (CTR_OVERFLOWED(low)) { + rdmsrl(msrs->counters[i].addr, val); + if (CTR_OVERFLOWED(val)) { oprofile_add_sample(regs, i); wrmsrl(msrs->counters[i].addr, -reset_value[i]); } -- cgit v1.2.3-70-g09d2 From 17c1f07ed70afa4f3941745fc3cc173e2a0365fe Mon Sep 17 00:00:00 2001 From: Jay Lan Date: Fri, 7 Nov 2008 09:51:55 -0800 Subject: [IA64] Reserve elfcorehdr memory in CONFIG_CRASH_DUMP IA64 kdump kernel failed to initialize /proc/vmcore in 2.6.28-rc2. A bug was introduced in this patch commit: d9a9855d0b06ca6d6cc92596fedcc03f8512e062 always reserve elfcore header memory in crash kernel The problem was that the call to reserve_elfcorehdr() should be placed in CONFIG_CRASH_DUMP rather than in CONFIG_CRASH_KERNEL, which does not exist. Signed-off-by: Jay Lan Acked-by: Simon Hormon Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index bf441f49682..865af27c773 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -359,7 +359,7 @@ reserve_memory (void) } #endif -#ifdef CONFIG_CRASH_KERNEL +#ifdef CONFIG_CRASH_DUMP if (reserve_elfcorehdr(&rsvd_region[n].start, &rsvd_region[n].end) == 0) n++; -- cgit v1.2.3-70-g09d2 From d21cf3c16b1191f3154a51e0b20c82bf851cc553 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Mon, 3 Nov 2008 14:26:40 -0500 Subject: ACPI EC: Fix regression due to use of uninitialized variable breakage introduced by following patch commit 27663c5855b10af9ec67bc7dfba001426ba21222 Author: Matthew Wilcox Date: Fri Oct 10 02:22:59 2008 -0400 acpi_evaluate_integer() does not clear passed variable if there is an error at evaluation. So if we ignore error, we must supply initialized variable. http://bugzilla.kernel.org/show_bug.cgi?id=11917 Signed-off-by: Alexey Starikovskiy Tested-by: Alan Jenkins Signed-off-by: Len Brown --- drivers/acpi/ec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index ef42316f89f..523ac5b229a 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -736,7 +736,7 @@ static acpi_status ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval) { acpi_status status; - unsigned long long tmp; + unsigned long long tmp = 0; struct acpi_ec *ec = context; status = acpi_walk_resources(handle, METHOD_NAME__CRS, @@ -751,6 +751,7 @@ ec_parse_device(acpi_handle handle, u32 Level, void *context, void **retval) return status; ec->gpe = tmp; /* Use the global lock for all EC transactions? */ + tmp = 0; acpi_evaluate_integer(handle, "_GLK", NULL, &tmp); ec->global_lock = tmp; ec->handle = handle; -- cgit v1.2.3-70-g09d2 From 89595b8f2850a080d290bf778ec933ea1d99f78e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 7 Nov 2008 16:57:45 -0700 Subject: ACPI: consolidate ACPI_*_COMPONENT definitions in acpi_drivers.h Move all the component definitions for drivers to a single shared place, include/acpi/acpi_drivers.h. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/ac.c | 1 - drivers/acpi/acpi_memhotplug.c | 1 - drivers/acpi/battery.c | 1 - drivers/acpi/button.c | 1 - drivers/acpi/cm_sbs.c | 1 - drivers/acpi/container.c | 1 - drivers/acpi/fan.c | 1 - drivers/acpi/power.c | 3 +-- drivers/acpi/processor_core.c | 1 - drivers/acpi/processor_idle.c | 1 - drivers/acpi/processor_perflib.c | 2 +- drivers/acpi/processor_thermal.c | 1 - drivers/acpi/processor_throttling.c | 2 +- drivers/acpi/thermal.c | 1 - drivers/acpi/video.c | 1 - include/acpi/acpi_drivers.h | 13 ++++++++++++- 16 files changed, 15 insertions(+), 17 deletions(-) diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index d72a1b6c8a9..5cdd713a0ea 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -37,7 +37,6 @@ #include #include -#define ACPI_AC_COMPONENT 0x00020000 #define ACPI_AC_CLASS "ac_adapter" #define ACPI_AC_DEVICE_NAME "AC Adapter" #define ACPI_AC_FILE_STATE "state" diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c index 71d21c51c45..63a17b55b39 100644 --- a/drivers/acpi/acpi_memhotplug.c +++ b/drivers/acpi/acpi_memhotplug.c @@ -32,7 +32,6 @@ #include #include -#define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000UL #define ACPI_MEMORY_DEVICE_CLASS "memory" #define ACPI_MEMORY_DEVICE_HID "PNP0C80" #define ACPI_MEMORY_DEVICE_NAME "Hotplug Mem Device" diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index b2133e89ad9..47f6e38fa6c 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -46,7 +46,6 @@ #define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF -#define ACPI_BATTERY_COMPONENT 0x00040000 #define ACPI_BATTERY_CLASS "battery" #define ACPI_BATTERY_DEVICE_NAME "Battery" #define ACPI_BATTERY_NOTIFY_STATUS 0x80 diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index cb046c3fc3f..fd7ca289cb0 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -33,7 +33,6 @@ #include #include -#define ACPI_BUTTON_COMPONENT 0x00080000 #define ACPI_BUTTON_CLASS "button" #define ACPI_BUTTON_FILE_INFO "info" #define ACPI_BUTTON_FILE_STATE "state" diff --git a/drivers/acpi/cm_sbs.c b/drivers/acpi/cm_sbs.c index 80d5c88e68c..307963bd104 100644 --- a/drivers/acpi/cm_sbs.c +++ b/drivers/acpi/cm_sbs.c @@ -34,7 +34,6 @@ ACPI_MODULE_NAME("cm_sbs"); #define ACPI_AC_CLASS "ac_adapter" #define ACPI_BATTERY_CLASS "battery" -#define ACPI_SBS_COMPONENT 0x00080000 #define _COMPONENT ACPI_SBS_COMPONENT static struct proc_dir_entry *acpi_ac_dir; static struct proc_dir_entry *acpi_battery_dir; diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c index 134818b265a..17020c12623 100644 --- a/drivers/acpi/container.c +++ b/drivers/acpi/container.c @@ -41,7 +41,6 @@ #define INSTALL_NOTIFY_HANDLER 1 #define UNINSTALL_NOTIFY_HANDLER 2 -#define ACPI_CONTAINER_COMPONENT 0x01000000 #define _COMPONENT ACPI_CONTAINER_COMPONENT ACPI_MODULE_NAME("container"); diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index 60d54d1f6b1..eaaee1660bd 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -34,7 +34,6 @@ #include #include -#define ACPI_FAN_COMPONENT 0x00200000 #define ACPI_FAN_CLASS "fan" #define ACPI_FAN_FILE_STATE "state" diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index a1718e56103..81f583f8098 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -44,9 +44,8 @@ #include #include -#define _COMPONENT ACPI_POWER_COMPONENT +#define _COMPONENT ACPI_POWER_COMPONENT ACPI_MODULE_NAME("power"); -#define ACPI_POWER_COMPONENT 0x00800000 #define ACPI_POWER_CLASS "power_resource" #define ACPI_POWER_DEVICE_NAME "Power Resource" #define ACPI_POWER_FILE_INFO "info" diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 24a362f8034..105e0ff8384 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -59,7 +59,6 @@ #include #include -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define ACPI_PROCESSOR_DEVICE_NAME "Processor" #define ACPI_PROCESSOR_FILE_INFO "info" diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 81b40ed5379..5f8d746a9b8 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -59,7 +59,6 @@ #include #include -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_idle"); diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index dbcf260ea93..0d7b772bef5 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -44,9 +44,9 @@ #endif #include +#include #include -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define ACPI_PROCESSOR_FILE_PERFORMANCE "performance" #define _COMPONENT ACPI_PROCESSOR_COMPONENT diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c index ef34b18f95c..b1eb376fae4 100644 --- a/drivers/acpi/processor_thermal.c +++ b/drivers/acpi/processor_thermal.c @@ -40,7 +40,6 @@ #include #include -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_thermal"); diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 3da2df93d92..a0c38c94a8a 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -38,9 +38,9 @@ #include #include +#include #include -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_throttling"); diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index ad6cae938f0..a6da1d9918c 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -47,7 +47,6 @@ #include #include -#define ACPI_THERMAL_COMPONENT 0x04000000 #define ACPI_THERMAL_CLASS "thermal_zone" #define ACPI_THERMAL_DEVICE_NAME "Thermal Zone" #define ACPI_THERMAL_FILE_STATE "state" diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index bf0c26a7368..a3aad30d39f 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -41,7 +41,6 @@ #include #include -#define ACPI_VIDEO_COMPONENT 0x08000000 #define ACPI_VIDEO_CLASS "video" #define ACPI_VIDEO_BUS_NAME "Video Bus" #define ACPI_VIDEO_DEVICE_NAME "Video Device" diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index b3c40dc9d6b..8778a3a00bc 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -32,7 +32,19 @@ #define ACPI_MAX_STRING 80 #define ACPI_BUS_COMPONENT 0x00010000 +#define ACPI_AC_COMPONENT 0x00020000 +#define ACPI_BATTERY_COMPONENT 0x00040000 +#define ACPI_BUTTON_COMPONENT 0x00080000 +#define ACPI_SBS_COMPONENT 0x00080000 +#define ACPI_FAN_COMPONENT 0x00200000 +#define ACPI_PCI_COMPONENT 0x00400000 +#define ACPI_POWER_COMPONENT 0x00800000 +#define ACPI_CONTAINER_COMPONENT 0x01000000 +#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_SYSTEM_COMPONENT 0x02000000 +#define ACPI_THERMAL_COMPONENT 0x04000000 +#define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000 +#define ACPI_VIDEO_COMPONENT 0x08000000 /* * _HID definitions @@ -54,7 +66,6 @@ PCI -------------------------------------------------------------------------- */ -#define ACPI_PCI_COMPONENT 0x00400000 /* ACPI PCI Interrupt Link (pci_link.c) */ -- cgit v1.2.3-70-g09d2 From 44342f9e8dfbe8c0fadf940bf6b5c2eaaffe6850 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 7 Nov 2008 16:57:50 -0700 Subject: ACPI: fix conflicting component definitions Some of the component definitions that were previous scattered around the drivers conflict with each other. That doesn't hurt anything except that setting one bit in the debug_layer mask would turn on debugging in two different modules. This patch fixes the conflicts. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- include/acpi/acpi_drivers.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 8778a3a00bc..414a6ccdc04 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -35,16 +35,16 @@ #define ACPI_AC_COMPONENT 0x00020000 #define ACPI_BATTERY_COMPONENT 0x00040000 #define ACPI_BUTTON_COMPONENT 0x00080000 -#define ACPI_SBS_COMPONENT 0x00080000 +#define ACPI_SBS_COMPONENT 0x00100000 #define ACPI_FAN_COMPONENT 0x00200000 #define ACPI_PCI_COMPONENT 0x00400000 #define ACPI_POWER_COMPONENT 0x00800000 #define ACPI_CONTAINER_COMPONENT 0x01000000 -#define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_SYSTEM_COMPONENT 0x02000000 #define ACPI_THERMAL_COMPONENT 0x04000000 #define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000 -#define ACPI_VIDEO_COMPONENT 0x08000000 +#define ACPI_VIDEO_COMPONENT 0x10000000 +#define ACPI_PROCESSOR_COMPONENT 0x20000000 /* * _HID definitions -- cgit v1.2.3-70-g09d2 From bdd7279919f682da8752fb47784a1ee302f8b7ea Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 7 Nov 2008 16:57:55 -0700 Subject: ACPI: add driver component definitions to sysfs debug_layers /sys/module/acpi/parameters/debug_layers used to contain only the debug layers defined by the ACPI CA. This patch adds the additional layer definitions for ACPI drivers. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/debug.c | 15 +++++++++++++++ include/acpi/acpi_drivers.h | 4 ++++ 2 files changed, 19 insertions(+) diff --git a/drivers/acpi/debug.c b/drivers/acpi/debug.c index abf36b4b1d1..c4839689200 100644 --- a/drivers/acpi/debug.c +++ b/drivers/acpi/debug.c @@ -44,6 +44,21 @@ static const struct acpi_dlayer acpi_debug_layers[] = { ACPI_DEBUG_INIT(ACPI_CA_DISASSEMBLER), ACPI_DEBUG_INIT(ACPI_COMPILER), ACPI_DEBUG_INIT(ACPI_TOOLS), + + ACPI_DEBUG_INIT(ACPI_BUS_COMPONENT), + ACPI_DEBUG_INIT(ACPI_AC_COMPONENT), + ACPI_DEBUG_INIT(ACPI_BATTERY_COMPONENT), + ACPI_DEBUG_INIT(ACPI_BUTTON_COMPONENT), + ACPI_DEBUG_INIT(ACPI_SBS_COMPONENT), + ACPI_DEBUG_INIT(ACPI_FAN_COMPONENT), + ACPI_DEBUG_INIT(ACPI_PCI_COMPONENT), + ACPI_DEBUG_INIT(ACPI_POWER_COMPONENT), + ACPI_DEBUG_INIT(ACPI_CONTAINER_COMPONENT), + ACPI_DEBUG_INIT(ACPI_SYSTEM_COMPONENT), + ACPI_DEBUG_INIT(ACPI_THERMAL_COMPONENT), + ACPI_DEBUG_INIT(ACPI_MEMORY_DEVICE_COMPONENT), + ACPI_DEBUG_INIT(ACPI_VIDEO_COMPONENT), + ACPI_DEBUG_INIT(ACPI_PROCESSOR_COMPONENT), }; static const struct acpi_dlevel acpi_debug_levels[] = { diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 414a6ccdc04..e6e90208147 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -31,6 +31,10 @@ #define ACPI_MAX_STRING 80 +/* + * Please update drivers/acpi/debug.c and Documentation/acpi/debug.txt + * if you add to this list. + */ #define ACPI_BUS_COMPONENT 0x00010000 #define ACPI_AC_COMPONENT 0x00020000 #define ACPI_BATTERY_COMPONENT 0x00040000 -- cgit v1.2.3-70-g09d2 From 87b586088ef953c602680e5aff8ab83a2e299498 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 7 Nov 2008 16:58:00 -0700 Subject: ACPI: turn off all debug output by default When CONFIG_ACPI_DEBUG=y, the default acpi_dbg_layer and acpi_dbg_level values built into the ACPI CA have some debug output enabled. We'd rather be quiet unless the user actually specified the acpi.debug_level argument. This enables distros to ship with CONFIG_ACPI_DEBUG=y without inundating users with debug output. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/bus.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 765fd1c56cd..7edf6d913c1 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -688,6 +688,14 @@ void __init acpi_early_init(void) if (acpi_disabled) return; + /* + * ACPI CA initializes acpi_dbg_level to non-zero, which means + * we get debug output merely by turning on CONFIG_ACPI_DEBUG. + * Turn it off so we don't get output unless the user specifies + * acpi.debug_level. + */ + acpi_dbg_level = 0; + printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION); /* enable workarounds, unless strict ACPI spec. compliance */ -- cgit v1.2.3-70-g09d2 From a0d84a92df43b7206b9c1330a2cccf109cf0a41a Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 7 Nov 2008 16:58:05 -0700 Subject: ACPI: update debug parameter documentation Reformat acpi.debug_layer and acpi.debug_level documentation so it's more readable, add some clues about how to figure out the mask bits that enable a specific ACPI_DEBUG_PRINT statement, and include some useful examples. Move the list of masks to Documentation/acpi/debug.txt (these are copies of the authoritative values in acoutput.h and acpi_drivers.h). Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- Documentation/acpi/debug.txt | 148 ++++++++++++++++++++++++++++++++++++ Documentation/kernel-parameters.txt | 75 ++++++------------ drivers/acpi/Kconfig | 10 ++- 3 files changed, 178 insertions(+), 55 deletions(-) create mode 100644 Documentation/acpi/debug.txt diff --git a/Documentation/acpi/debug.txt b/Documentation/acpi/debug.txt new file mode 100644 index 00000000000..65bf47c46b6 --- /dev/null +++ b/Documentation/acpi/debug.txt @@ -0,0 +1,148 @@ + ACPI Debug Output + + +The ACPI CA, the Linux ACPI core, and some ACPI drivers can generate debug +output. This document describes how to use this facility. + +Compile-time configuration +-------------------------- + +ACPI debug output is globally enabled by CONFIG_ACPI_DEBUG. If this config +option is turned off, the debug messages are not even built into the +kernel. + +Boot- and run-time configuration +-------------------------------- + +When CONFIG_ACPI_DEBUG=y, you can select the component and level of messages +you're interested in. At boot-time, use the acpi.debug_layer and +acpi.debug_level kernel command line options. After boot, you can use the +debug_layer and debug_level files in /sys/module/acpi/parameters/ to control +the debug messages. + +debug_layer (component) +----------------------- + +The "debug_layer" is a mask that selects components of interest, e.g., a +specific driver or part of the ACPI interpreter. To build the debug_layer +bitmask, look for the "#define _COMPONENT" in an ACPI source file. + +You can set the debug_layer mask at boot-time using the acpi.debug_layer +command line argument, and you can change it after boot by writing values +to /sys/module/acpi/parameters/debug_layer. + +The possible components are defined in include/acpi/acoutput.h and +include/acpi/acpi_drivers.h. Reading /sys/module/acpi/parameters/debug_layer +shows the supported mask values, currently these: + + ACPI_UTILITIES 0x00000001 + ACPI_HARDWARE 0x00000002 + ACPI_EVENTS 0x00000004 + ACPI_TABLES 0x00000008 + ACPI_NAMESPACE 0x00000010 + ACPI_PARSER 0x00000020 + ACPI_DISPATCHER 0x00000040 + ACPI_EXECUTER 0x00000080 + ACPI_RESOURCES 0x00000100 + ACPI_CA_DEBUGGER 0x00000200 + ACPI_OS_SERVICES 0x00000400 + ACPI_CA_DISASSEMBLER 0x00000800 + ACPI_COMPILER 0x00001000 + ACPI_TOOLS 0x00002000 + ACPI_BUS_COMPONENT 0x00010000 + ACPI_AC_COMPONENT 0x00020000 + ACPI_BATTERY_COMPONENT 0x00040000 + ACPI_BUTTON_COMPONENT 0x00080000 + ACPI_SBS_COMPONENT 0x00100000 + ACPI_FAN_COMPONENT 0x00200000 + ACPI_PCI_COMPONENT 0x00400000 + ACPI_POWER_COMPONENT 0x00800000 + ACPI_CONTAINER_COMPONENT 0x01000000 + ACPI_SYSTEM_COMPONENT 0x02000000 + ACPI_THERMAL_COMPONENT 0x04000000 + ACPI_MEMORY_DEVICE_COMPONENT 0x08000000 + ACPI_VIDEO_COMPONENT 0x10000000 + ACPI_PROCESSOR_COMPONENT 0x20000000 + +debug_level +----------- + +The "debug_level" is a mask that selects different types of messages, e.g., +those related to initialization, method execution, informational messages, etc. +To build debug_level, look at the level specified in an ACPI_DEBUG_PRINT() +statement. + +The ACPI interpreter uses several different levels, but the Linux +ACPI core and ACPI drivers generally only use ACPI_LV_INFO. + +You can set the debug_level mask at boot-time using the acpi.debug_level +command line argument, and you can change it after boot by writing values +to /sys/module/acpi/parameters/debug_level. + +The possible levels are defined in include/acpi/acoutput.h. Reading +/sys/module/acpi/parameters/debug_level shows the supported mask values, +currently these: + + ACPI_LV_INIT 0x00000001 + ACPI_LV_DEBUG_OBJECT 0x00000002 + ACPI_LV_INFO 0x00000004 + ACPI_LV_INIT_NAMES 0x00000020 + ACPI_LV_PARSE 0x00000040 + ACPI_LV_LOAD 0x00000080 + ACPI_LV_DISPATCH 0x00000100 + ACPI_LV_EXEC 0x00000200 + ACPI_LV_NAMES 0x00000400 + ACPI_LV_OPREGION 0x00000800 + ACPI_LV_BFIELD 0x00001000 + ACPI_LV_TABLES 0x00002000 + ACPI_LV_VALUES 0x00004000 + ACPI_LV_OBJECTS 0x00008000 + ACPI_LV_RESOURCES 0x00010000 + ACPI_LV_USER_REQUESTS 0x00020000 + ACPI_LV_PACKAGE 0x00040000 + ACPI_LV_ALLOCATIONS 0x00100000 + ACPI_LV_FUNCTIONS 0x00200000 + ACPI_LV_OPTIMIZATIONS 0x00400000 + ACPI_LV_MUTEX 0x01000000 + ACPI_LV_THREADS 0x02000000 + ACPI_LV_IO 0x04000000 + ACPI_LV_INTERRUPTS 0x08000000 + ACPI_LV_AML_DISASSEMBLE 0x10000000 + ACPI_LV_VERBOSE_INFO 0x20000000 + ACPI_LV_FULL_TABLES 0x40000000 + ACPI_LV_EVENTS 0x80000000 + +Examples +-------- + +For example, drivers/acpi/bus.c contains this: + + #define _COMPONENT ACPI_BUS_COMPONENT + ... + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device insertion detected\n")); + +To turn on this message, set the ACPI_BUS_COMPONENT bit in acpi.debug_layer +and the ACPI_LV_INFO bit in acpi.debug_level. (The ACPI_DEBUG_PRINT +statement uses ACPI_DB_INFO, which is macro based on the ACPI_LV_INFO +definition.) + +Enable all AML "Debug" output (stores to the Debug object while interpreting +AML) during boot: + + acpi.debug_layer=0xffffffff acpi.debug_level=0x2 + +Enable PCI and PCI interrupt routing debug messages: + + acpi.debug_layer=0x400000 acpi.debug_level=0x4 + +Enable all ACPI hardware-related messages: + + acpi.debug_layer=0x2 acpi.debug_level=0xffffffff + +Enable all ACPI_DB_INFO messages after boot: + + # echo 0x4 > /sys/module/acpi/parameters/debug_level + +Show all valid component values: + + # cat /sys/module/acpi/parameters/debug_layer diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 343e0f0f84b..e8951118dea 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -198,59 +198,30 @@ and is between 256 and 4096 characters. It is defined in the file that require a timer override, but don't have HPET - acpi.debug_layer= [HW,ACPI] + acpi.debug_layer= [HW,ACPI,ACPI_DEBUG] + acpi.debug_level= [HW,ACPI,ACPI_DEBUG] Format: - Each bit of the indicates an ACPI debug layer, - 1: enable, 0: disable. It is useful for boot time - debugging. After system has booted up, it can be set - via /sys/module/acpi/parameters/debug_layer. - CONFIG_ACPI_DEBUG must be enabled for this to produce any output. - Available bits (add the numbers together) to enable debug output - for specific parts of the ACPI subsystem: - 0x01 utilities 0x02 hardware 0x04 events 0x08 tables - 0x10 namespace 0x20 parser 0x40 dispatcher - 0x80 executer 0x100 resources 0x200 acpica debugger - 0x400 os services 0x800 acpica disassembler. - The number can be in decimal or prefixed with 0x in hex. - Warning: Many of these options can produce a lot of - output and make your system unusable. Be very careful. - - acpi.debug_level= [HW,ACPI] - Format: - Each bit of the indicates an ACPI debug level, - which corresponds to the level in an ACPI_DEBUG_PRINT - statement. After system has booted up, this mask - can be set via /sys/module/acpi/parameters/debug_level. - - CONFIG_ACPI_DEBUG must be enabled for this to produce - any output. The number can be in decimal or prefixed - with 0x in hex. Some of these options produce so much - output that the system is unusable. - - The following global components are defined by the - ACPI CA: - 0x01 error - 0x02 warn - 0x04 init - 0x08 debug object - 0x10 info - 0x20 init names - 0x40 parse - 0x80 load - 0x100 dispatch - 0x200 execute - 0x400 names - 0x800 operation region - 0x1000 bfield - 0x2000 tables - 0x4000 values - 0x8000 objects - 0x10000 resources - 0x20000 user requests - 0x40000 package - The number can be in decimal or prefixed with 0x in hex. - Warning: Many of these options can produce a lot of - output and make your system unusable. Be very careful. + CONFIG_ACPI_DEBUG must be enabled to produce any ACPI + debug output. Bits in debug_layer correspond to a + _COMPONENT in an ACPI source file, e.g., + #define _COMPONENT ACPI_PCI_COMPONENT + Bits in debug_level correspond to a level in + ACPI_DEBUG_PRINT statements, e.g., + ACPI_DEBUG_PRINT((ACPI_DB_INFO, ... + See Documentation/acpi/debug.txt for more information + about debug layers and levels. + + Enable AML "Debug" output, i.e., stores to the Debug + object while interpreting AML: + acpi.debug_layer=0xffffffff acpi.debug_level=0x2 + Enable PCI/PCI interrupt routing info messages: + acpi.debug_layer=0x400000 acpi.debug_level=0x4 + Enable all messages related to ACPI hardware: + acpi.debug_layer=0x2 acpi.debug_level=0xffffffff + + Some values produce so much output that the system is + unusable. The "log_buf_len" parameter may be useful + if you need to capture more output. acpi.power_nocheck= [HW,ACPI] Format: 1/0 enable/disable the check of power state. diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 90cb2a823b5..b0243fd55ac 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -312,9 +312,13 @@ config ACPI_DEBUG bool "Debug Statements" default n help - The ACPI driver can optionally report errors with a great deal - of verbosity. Saying Y enables these statements. This will increase - your kernel size by around 50K. + The ACPI subsystem can produce debug output. Saying Y enables this + output and increases the kernel size by around 50K. + + Use the acpi.debug_layer and acpi.debug_level kernel command-line + parameters documented in Documentation/acpi/debug.txt and + Documentation/kernel-parameters.txt to control the type and + amount of debug output. config ACPI_DEBUG_FUNC_TRACE bool "Additionally enable ACPI function tracing" -- cgit v1.2.3-70-g09d2 From a1a8d334f9e8c89a15bba8f34e443a37c29079c3 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 31 Jul 2008 23:02:28 +0200 Subject: Delete an unwanted return statement at evgpe.c Len's tree branch release-2.6.27, found an unwanted return statement at evgpe.c. (git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 release-2.6.27) Signed-of-by Lin Ming Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/acpi/events/evgpe.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c index c5e53aae86f..f45c74fe745 100644 --- a/drivers/acpi/events/evgpe.c +++ b/drivers/acpi/events/evgpe.c @@ -289,8 +289,6 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) */ status = acpi_hw_low_disable_gpe(gpe_event_info); return_ACPI_STATUS(status); - - return_ACPI_STATUS(AE_OK); } /******************************************************************************* -- cgit v1.2.3-70-g09d2 From 22c13f9d8179f4c9caecfcb60a95214562b9addc Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:54 +0200 Subject: ACPI: video: Ignore devices that aren't present in hardware This is a reimplemention of commit 0119509c4fbc9adcef1472817fda295334612976 from Matthew Garrett This patch got removed because of a regression: ThinkPads with a Intel graphics card and an Integrated Graphics Device BIOS implementation stopped working. In fact, they only worked because the ACPI device of the discrete, the wrong one, got used (via int10). So ACPI functions were poking on the wrong hardware used which is a sever bug. The next patch provides support for above ThinkPads to be able to switch brightness via the legacy thinkpad_acpi driver and automatically detect when to use it. Original commit message from Matthew Garrett: Vendors often ship machines with a choice of integrated or discrete graphics, and use the same DSDT for both. As a result, the ACPI video module will locate devices that may not exist on this specific platform. Attempt to determine whether the device exists or not, and abort the device creation if it doesn't. http://bugzilla.kernel.org/show_bug.cgi?id=9614 Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/acpi/glue.c | 40 ++++++++++++++++++++++++++++++++++++++++ drivers/acpi/video.c | 7 ++++++- include/acpi/acpi_bus.h | 2 ++ 3 files changed, 48 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 24649ada08d..adec3d15810 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -140,6 +140,46 @@ struct device *acpi_get_physical_device(acpi_handle handle) EXPORT_SYMBOL(acpi_get_physical_device); +/* ToDo: When a PCI bridge is found, return the PCI device behind the bridge + * This should work in general, but did not on a Lenovo T61 for the + * graphics card. But this must be fixed when the PCI device is + * bound and the kernel device struct is attached to the acpi device + * Note: A success call will increase reference count by one + * Do call put_device(dev) on the returned device then + */ +struct device *acpi_get_physical_pci_device(acpi_handle handle) +{ + struct device *dev; + long long device_id; + acpi_status status; + + status = + acpi_evaluate_integer(handle, "_ADR", NULL, &device_id); + + if (ACPI_FAILURE(status)) + return NULL; + + /* We need to attempt to determine whether the _ADR refers to a + PCI device or not. There's no terribly good way to do this, + so the best we can hope for is to assume that there'll never + be a device in the host bridge */ + if (device_id >= 0x10000) { + /* It looks like a PCI device. Does it exist? */ + dev = acpi_get_physical_device(handle); + } else { + /* It doesn't look like a PCI device. Does its parent + exist? */ + acpi_handle phandle; + if (acpi_get_parent(handle, &phandle)) + return NULL; + dev = acpi_get_physical_device(phandle); + } + if (!dev) + return NULL; + return dev; +} +EXPORT_SYMBOL(acpi_get_physical_pci_device); + static int acpi_bind_one(struct device *dev, acpi_handle handle) { struct acpi_device *acpi_dev; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index a29b0ccac65..6597c2a37c3 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -842,11 +842,16 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video) static int acpi_video_bus_check(struct acpi_video_bus *video) { acpi_status status = -ENOENT; - + struct device *dev; if (!video) return -EINVAL; + dev = acpi_get_physical_pci_device(video->device->handle); + if (!dev) + return -ENODEV; + put_device(dev); + /* Since there is no HID, CID and so on for VGA driver, we have * to check well known required nodes. */ diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 54a279e44c9..e9f6574930e 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -380,6 +380,8 @@ struct acpi_bus_type { int register_acpi_bus_type(struct acpi_bus_type *); int unregister_acpi_bus_type(struct acpi_bus_type *); struct device *acpi_get_physical_device(acpi_handle); +struct device *acpi_get_physical_pci_device(acpi_handle); + /* helper */ acpi_handle acpi_get_child(acpi_handle, acpi_integer); acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int); -- cgit v1.2.3-70-g09d2 From c3d6de698c84efdbdd3781b7058bcc339ab43da8 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:55 +0200 Subject: ACPI video: if no ACPI backlight support, use vendor drivers If an ACPI graphics device supports backlight brightness functions (cmp. with latest ACPI spec Appendix B), let the ACPI video driver control backlight and switch backlight control off in vendor specific ACPI drivers (asus_acpi, thinkpad_acpi, eeepc, fujitsu_laptop, msi_laptop, sony_laptop, acer-wmi). Currently it is possible to load above drivers and let both poke on the brightness HW registers, the video and vendor specific ACPI drivers -> bad. This patch provides the basic support to check for BIOS capabilities before driver loading time. Driver specific modifications are in separate follow up patches. "acpi_backlight=vendor" Prever vendor driver over ACPI driver for backlight. "acpi_backlight=video" (default) Prever ACPI driver over vendor driver for backlight. Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- Documentation/kernel-parameters.txt | 12 ++ drivers/acpi/Makefile | 4 + drivers/acpi/scan.c | 32 +---- drivers/acpi/video.c | 28 ++-- drivers/acpi/video_detect.c | 268 ++++++++++++++++++++++++++++++++++++ include/linux/acpi.h | 44 ++++++ 6 files changed, 345 insertions(+), 43 deletions(-) create mode 100644 drivers/acpi/video_detect.c diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c86c0745971..dd5013f974d 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -198,6 +198,18 @@ and is between 256 and 4096 characters. It is defined in the file that require a timer override, but don't have HPET + acpi_backlight= [HW,ACPI] + acpi_backlight=vendor + acpi_backlight=video + If set to vendor, prefer vendor specific driver + (e.g. thinkpad_acpi, sony_acpi, etc.) instead + of the ACPI video.ko driver. + + acpi_display_output= [HW,ACPI] + acpi_display_output=vendor + acpi_display_output=video + See above. + acpi.debug_layer= [HW,ACPI] Format: Each bit of the indicates an ACPI debug layer, diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index d91c027ece8..c03810aa19c 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -46,6 +46,10 @@ obj-$(CONFIG_ACPI_BUTTON) += button.o obj-$(CONFIG_ACPI_FAN) += fan.o obj-$(CONFIG_ACPI_DOCK) += dock.o obj-$(CONFIG_ACPI_VIDEO) += video.o +ifdef CONFIG_ACPI_VIDEO +obj-y += video_detect.o +endif + obj-y += pci_root.o pci_link.o pci_irq.o pci_bind.o obj-$(CONFIG_ACPI_PCI_SLOT) += pci_slot.o obj-$(CONFIG_ACPI_PROCESSOR) += processor.o diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index a9dda8e0f9f..556b182001c 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -919,36 +919,6 @@ static void acpi_device_get_busid(struct acpi_device *device, } } -static int -acpi_video_bus_match(struct acpi_device *device) -{ - acpi_handle h_dummy; - - if (!device) - return -EINVAL; - - /* Since there is no HID, CID for ACPI Video drivers, we have - * to check well known required nodes for each feature we support. - */ - - /* Does this device able to support video switching ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) && - ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy))) - return 0; - - /* Does this device able to retrieve a video ROM ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy))) - return 0; - - /* Does this device able to configure which video head to be POSTed ? */ - if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) && - ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) && - ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy))) - return 0; - - return -ENODEV; -} - /* * acpi_bay_match - see if a device is an ejectable driver bay * @@ -1031,7 +1001,7 @@ static void acpi_device_set_id(struct acpi_device *device, will get autoloaded and the device might still match against another driver. */ - if (ACPI_SUCCESS(acpi_video_bus_match(device))) + if (acpi_is_video_device(device)) cid_add = ACPI_VIDEO_HID; else if (ACPI_SUCCESS(acpi_bay_match(device))) cid_add = ACPI_BAY_HID; diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 6597c2a37c3..2097c399dd0 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -739,7 +739,8 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) device->cap._DSS = 1; } - max_level = acpi_video_init_brightness(device); + if (acpi_video_backlight_support()) + max_level = acpi_video_init_brightness(device); if (device->cap._BCL && device->cap._BCM && max_level > 0) { int result; @@ -785,18 +786,21 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) printk(KERN_ERR PREFIX "Create sysfs link\n"); } - if (device->cap._DCS && device->cap._DSS){ - static int count = 0; - char *name; - name = kzalloc(MAX_NAME_LEN, GFP_KERNEL); - if (!name) - return; - sprintf(name, "acpi_video%d", count++); - device->output_dev = video_output_register(name, - NULL, device, &acpi_output_properties); - kfree(name); + + if (acpi_video_display_switch_support()) { + + if (device->cap._DCS && device->cap._DSS) { + static int count; + char *name; + name = kzalloc(MAX_NAME_LEN, GFP_KERNEL); + if (!name) + return; + sprintf(name, "acpi_video%d", count++); + device->output_dev = video_output_register(name, + NULL, device, &acpi_output_properties); + kfree(name); + } } - return; } /* diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c new file mode 100644 index 00000000000..70b1e91ae2a --- /dev/null +++ b/drivers/acpi/video_detect.c @@ -0,0 +1,268 @@ +/* + * Copyright (C) 2008 SuSE Linux Products GmbH + * Thomas Renninger + * + * May be copied or modified under the terms of the GNU General Public License + * + * video_detect.c: + * Provides acpi_is_video_device() for early scanning of ACPI devices in scan.c + * There a Linux specific (Spec does not provide a HID for video devices) is + * assinged + * + * After PCI devices are glued with ACPI devices + * acpi_get_physical_pci_device() can be called to identify ACPI graphics + * devices for which a real graphics card is plugged in + * + * Now acpi_video_get_capabilities() can be called to check which + * capabilities the graphics cards plugged in support. The check for general + * video capabilities will be triggered by the first caller of + * acpi_video_get_capabilities(NULL); which will happen when the first + * backlight (or display output) switching supporting driver calls: + * acpi_video_backlight_support(); + * + * Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B) + * are available, video.ko should be used to handle the device. + * + * Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi, + * sony_acpi,... can take care about backlight brightness and display output + * switching. + * + * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m) + * this file will not be compiled, acpi_video_get_capabilities() and + * acpi_video_backlight_support() will always return 0 and vendor specific + * drivers always can handle backlight. + * + */ + +#include +#include + +ACPI_MODULE_NAME("video"); +#define ACPI_VIDEO_COMPONENT 0x08000000 +#define _COMPONENT ACPI_VIDEO_COMPONENT + +static long acpi_video_support; +static bool acpi_video_caps_checked; + +static acpi_status +acpi_backlight_cap_match(acpi_handle handle, u32 level, void *context, + void **retyurn_value) +{ + long *cap = context; + acpi_handle h_dummy; + + if (ACPI_SUCCESS(acpi_get_handle(handle, "_BCM", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(handle, "_BCL", &h_dummy))) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found generic backlight " + "support\n")); + *cap |= ACPI_VIDEO_BACKLIGHT; + /* We have backlight support, no need to scan further */ + return AE_CTRL_TERMINATE; + } + return 0; +} + +/* Returns true if the device is a video device which can be handled by + * video.ko. + * The device will get a Linux specific CID added in scan.c to + * identify the device as an ACPI graphics device + * Be aware that the graphics device may not be physically present + * Use acpi_video_get_capabilities() to detect general ACPI video + * capabilities of present cards + */ +long acpi_is_video_device(struct acpi_device *device) +{ + acpi_handle h_dummy; + long video_caps = 0; + + if (!device) + return 0; + + /* Does this device able to support video switching ? */ + if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy))) + video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING; + + /* Does this device able to retrieve a video ROM ? */ + if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy))) + video_caps |= ACPI_VIDEO_ROM_AVAILABLE; + + /* Does this device able to configure which video head to be POSTed ? */ + if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) && + ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy))) + video_caps |= ACPI_VIDEO_DEVICE_POSTING; + + /* Only check for backlight functionality if one of the above hit. */ + if (video_caps) + acpi_walk_namespace(ACPI_TYPE_DEVICE, device->handle, + ACPI_UINT32_MAX, acpi_backlight_cap_match, + &video_caps, NULL); + + return video_caps; +} +EXPORT_SYMBOL(acpi_is_video_device); + +static acpi_status +find_video(acpi_handle handle, u32 lvl, void *context, void **rv) +{ + long *cap = context; + struct device *dev; + struct acpi_device *acpi_dev; + + const struct acpi_device_id video_ids[] = { + {ACPI_VIDEO_HID, 0}, + {"", 0}, + }; + if (acpi_bus_get_device(handle, &acpi_dev)) + return AE_OK; + + if (!acpi_match_device_ids(acpi_dev, video_ids)) { + dev = acpi_get_physical_pci_device(handle); + if (!dev) + return AE_OK; + put_device(dev); + *cap |= acpi_is_video_device(acpi_dev); + } + return AE_OK; +} + +/* + * Returns the video capabilities of a specific ACPI graphics device + * + * if NULL is passed as argument all ACPI devices are enumerated and + * all graphics capabilities of physically present devices are + * summerized and returned. This is cached and done only once. + */ +long acpi_video_get_capabilities(acpi_handle graphics_handle) +{ + long caps = 0; + struct acpi_device *tmp_dev; + acpi_status status; + + if (acpi_video_caps_checked && graphics_handle == NULL) + return acpi_video_support; + + if (!graphics_handle) { + /* Only do the global walk through all graphics devices once */ + acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + ACPI_UINT32_MAX, find_video, + &caps, NULL); + /* There might be boot param flags set already... */ + acpi_video_support |= caps; + acpi_video_caps_checked = 1; + /* Add blacklists here. Be careful to use the right *DMI* bits + * to still be able to override logic via boot params, e.g.: + * + * if (dmi_name_in_vendors("XY")) { + * acpi_video_support |= + * ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR; + * acpi_video_support |= + * ACPI_VIDEO_BACKLIGHT_DMI_VENDOR; + *} + */ + } else { + status = acpi_bus_get_device(graphics_handle, &tmp_dev); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, "Invalid device")); + return 0; + } + acpi_walk_namespace(ACPI_TYPE_DEVICE, graphics_handle, + ACPI_UINT32_MAX, find_video, + &caps, NULL); + } + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "We have 0x%lX video support %s %s\n", + graphics_handle ? caps : acpi_video_support, + graphics_handle ? "on device " : "in general", + graphics_handle ? acpi_device_bid(tmp_dev) : "")); + return caps; +} +EXPORT_SYMBOL(acpi_video_get_capabilities); + +/* Returns true if video.ko can do backlight switching */ +int acpi_video_backlight_support(void) +{ + /* + * We must check whether the ACPI graphics device is physically plugged + * in. Therefore this must be called after binding PCI and ACPI devices + */ + if (!acpi_video_caps_checked) + acpi_video_get_capabilities(NULL); + + /* First check for boot param -> highest prio */ + if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO) + return 1; + + /* Then check for DMI blacklist -> second highest prio */ + if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VIDEO) + return 1; + + /* Then go the default way */ + return acpi_video_support & ACPI_VIDEO_BACKLIGHT; +} +EXPORT_SYMBOL(acpi_video_backlight_support); + +/* + * Returns true if video.ko can do display output switching. + * This does not work well/at all with binary graphics drivers + * which disable system io ranges and do it on their own. + */ +int acpi_video_display_switch_support(void) +{ + if (!acpi_video_caps_checked) + acpi_video_get_capabilities(NULL); + + if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO) + return 1; + + if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR) + return 0; + else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO) + return 1; + + return acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING; +} +EXPORT_SYMBOL(acpi_video_display_switch_support); + +/* + * Use acpi_display_output=vendor/video or acpi_backlight=vendor/video + * To force that backlight or display output switching is processed by vendor + * specific acpi drivers or video.ko driver. + */ +int __init acpi_backlight(char *str) +{ + if (str == NULL || *str == '\0') + return 1; + else { + if (!strcmp("vendor", str)) + acpi_video_support |= + ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR; + if (!strcmp("video", str)) + acpi_video_support |= + ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO; + } + return 1; +} +__setup("acpi_backlight=", acpi_backlight); + +int __init acpi_display_output(char *str) +{ + if (str == NULL || *str == '\0') + return 1; + else { + if (!strcmp("vendor", str)) + acpi_video_support |= + ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR; + if (!strcmp("video", str)) + acpi_video_support |= + ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO; + } + return 1; +} +__setup("acpi_display_output=", acpi_display_output); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index fd6a452b0ce..7f23761ace3 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -194,6 +194,50 @@ extern bool wmi_has_guid(const char *guid); #endif /* CONFIG_ACPI_WMI */ +#define ACPI_VIDEO_OUTPUT_SWITCHING 0x0001 +#define ACPI_VIDEO_DEVICE_POSTING 0x0002 +#define ACPI_VIDEO_ROM_AVAILABLE 0x0004 +#define ACPI_VIDEO_BACKLIGHT 0x0008 +#define ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR 0x0010 +#define ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO 0x0020 +#define ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR 0x0040 +#define ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO 0x0080 +#define ACPI_VIDEO_BACKLIGHT_DMI_VENDOR 0x0100 +#define ACPI_VIDEO_BACKLIGHT_DMI_VIDEO 0x0200 +#define ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR 0x0400 +#define ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO 0x0800 + +#if defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) + +extern long acpi_video_get_capabilities(acpi_handle graphics_dev_handle); +extern long acpi_is_video_device(struct acpi_device *device); +extern int acpi_video_backlight_support(void); +extern int acpi_video_display_switch_support(void); + +#else + +static inline long acpi_video_get_capabilities(acpi_handle graphics_dev_handle) +{ + return 0; +} + +static inline long acpi_is_video_device(struct acpi_device *device) +{ + return 0; +} + +static inline int acpi_video_backlight_support(void) +{ + return 0; +} + +static inline int acpi_video_display_switch_support(void) +{ + return 0; +} + +#endif /* defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) */ + extern int acpi_blacklisted(void); #ifdef CONFIG_DMI extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d); -- cgit v1.2.3-70-g09d2 From febf2d95a71cd594182e4b3defb0e0ffdfe61482 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:56 +0200 Subject: Acer-WMI: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Acked-by: Carlos Corbacho Signed-off-by: Len Brown --- drivers/misc/acer-wmi.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index 0532a2de2ce..94c9f911824 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -1297,6 +1297,12 @@ static int __init acer_wmi_init(void) set_quirks(); + if (!acpi_video_backlight_support() && has_cap(ACER_CAP_BRIGHTNESS)) { + interface->capability &= ~ACER_CAP_BRIGHTNESS; + printk(ACER_INFO "Brightness must be controlled by " + "generic video driver\n"); + } + if (platform_driver_register(&acer_platform_driver)) { printk(ACER_ERR "Unable to register platform driver.\n"); goto error_platform_register; -- cgit v1.2.3-70-g09d2 From 6766fec3669d5053b987e111afb348b885237bfc Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:57 +0200 Subject: asus-acpi: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/misc/asus-laptop.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c index a9d5228724a..8fb8b359104 100644 --- a/drivers/misc/asus-laptop.c +++ b/drivers/misc/asus-laptop.c @@ -1208,9 +1208,13 @@ static int __init asus_laptop_init(void) dev = acpi_get_physical_device(hotk->device->handle); - result = asus_backlight_init(dev); - if (result) - goto fail_backlight; + if (!acpi_video_backlight_support()) { + result = asus_backlight_init(dev); + if (result) + goto fail_backlight; + } else + printk(ASUS_INFO "Brightness ignored, must be controlled by " + "ACPI video driver\n"); result = asus_led_init(dev); if (result) -- cgit v1.2.3-70-g09d2 From 29454f17124c655236d2972dad21907e15ca294b Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:58 +0200 Subject: compal: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/misc/compal-laptop.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/misc/compal-laptop.c b/drivers/misc/compal-laptop.c index 344b790a625..11003bba10d 100644 --- a/drivers/misc/compal-laptop.c +++ b/drivers/misc/compal-laptop.c @@ -326,12 +326,14 @@ static int __init compal_init(void) /* Register backlight stuff */ - compalbl_device = backlight_device_register("compal-laptop", NULL, NULL, - &compalbl_ops); - if (IS_ERR(compalbl_device)) - return PTR_ERR(compalbl_device); + if (!acpi_video_backlight_support()) { + compalbl_device = backlight_device_register("compal-laptop", NULL, NULL, + &compalbl_ops); + if (IS_ERR(compalbl_device)) + return PTR_ERR(compalbl_device); - compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1; + compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1; + } ret = platform_driver_register(&compal_driver); if (ret) -- cgit v1.2.3-70-g09d2 From a2bf8c01048f855fbf65a8fc41460aef71ca39dc Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:37:59 +0200 Subject: eeepc-laptop: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/misc/eeepc-laptop.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c index 9ef98b2d503..02fe2b8b893 100644 --- a/drivers/misc/eeepc-laptop.c +++ b/drivers/misc/eeepc-laptop.c @@ -825,9 +825,15 @@ static int __init eeepc_laptop_init(void) return -ENODEV; } dev = acpi_get_physical_device(ehotk->device->handle); - result = eeepc_backlight_init(dev); - if (result) - goto fail_backlight; + + if (!acpi_video_backlight_support()) { + result = eeepc_backlight_init(dev); + if (result) + goto fail_backlight; + } else + printk(EEEPC_INFO "Backlight controlled by ACPI video " + "driver\n"); + result = eeepc_hwmon_init(dev); if (result) goto fail_hwmon; -- cgit v1.2.3-70-g09d2 From 7d5c89a615c5dae039094a3cf4a56fe6aab81765 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:38:00 +0200 Subject: fujitsu-laptop: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/misc/fujitsu-laptop.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index d2cf0bfe316..1070dc1bc18 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -990,16 +990,16 @@ static int __init fujitsu_init(void) /* Register backlight stuff */ - fujitsu->bl_device = - backlight_device_register("fujitsu-laptop", NULL, NULL, - &fujitsubl_ops); - if (IS_ERR(fujitsu->bl_device)) - return PTR_ERR(fujitsu->bl_device); - - max_brightness = fujitsu->max_brightness; - - fujitsu->bl_device->props.max_brightness = max_brightness - 1; - fujitsu->bl_device->props.brightness = fujitsu->brightness_level; + if (!acpi_video_backlight_support()) { + fujitsu->bl_device = + backlight_device_register("fujitsu-laptop", NULL, NULL, + &fujitsubl_ops); + if (IS_ERR(fujitsu->bl_device)) + return PTR_ERR(fujitsu->bl_device); + max_brightness = fujitsu->max_brightness; + fujitsu->bl_device->props.max_brightness = max_brightness - 1; + fujitsu->bl_device->props.brightness = fujitsu->brightness_level; + } ret = platform_driver_register(&fujitsupf_driver); if (ret) @@ -1035,7 +1035,8 @@ fail_hotkey: fail_backlight: - backlight_device_unregister(fujitsu->bl_device); + if (fujitsu->bl_device) + backlight_device_unregister(fujitsu->bl_device); fail_platform_device2: @@ -1062,7 +1063,8 @@ static void __exit fujitsu_cleanup(void) &fujitsupf_attribute_group); platform_device_unregister(fujitsu->pf_device); platform_driver_unregister(&fujitsupf_driver); - backlight_device_unregister(fujitsu->bl_device); + if (fujitsu->bl_device) + backlight_device_unregister(fujitsu->bl_device); acpi_bus_unregister_driver(&acpi_fujitsu_driver); -- cgit v1.2.3-70-g09d2 From a598c82f39892069a8f6693459b1179fd9ef30e1 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:38:01 +0200 Subject: msi-laptop: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/misc/msi-laptop.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/misc/msi-laptop.c b/drivers/misc/msi-laptop.c index de898c6938f..759763d18e4 100644 --- a/drivers/misc/msi-laptop.c +++ b/drivers/misc/msi-laptop.c @@ -347,12 +347,16 @@ static int __init msi_init(void) /* Register backlight stuff */ - msibl_device = backlight_device_register("msi-laptop-bl", NULL, NULL, - &msibl_ops); - if (IS_ERR(msibl_device)) - return PTR_ERR(msibl_device); - - msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1; + if (acpi_video_backlight_support()) { + printk(KERN_INFO "MSI: Brightness ignored, must be controlled " + "by ACPI video driver\n"); + } else { + msibl_device = backlight_device_register("msi-laptop-bl", NULL, + NULL, &msibl_ops); + if (IS_ERR(msibl_device)) + return PTR_ERR(msibl_device); + msibl_device->props.max_brightness = MSI_LCD_LEVEL_MAX-1; + } ret = platform_driver_register(&msipf_driver); if (ret) -- cgit v1.2.3-70-g09d2 From 540b8bb9c33935183ceb5bed466a42ad72b2af56 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:38:02 +0200 Subject: sony-laptop: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/misc/sony-laptop.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 06f07e19dc7..7bcb81002dc 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -1038,7 +1038,11 @@ static int sony_nc_add(struct acpi_device *device) goto outinput; } - if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", &handle))) { + if (!acpi_video_backlight_support()) { + printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be " + "controlled by ACPI video driver\n"); + } else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", + &handle))) { sony_backlight_device = backlight_device_register("sony", NULL, NULL, &sony_backlight_ops); -- cgit v1.2.3-70-g09d2 From 2dba1b5d87e08a294da5cdfa4d32908000e9b085 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 1 Aug 2008 17:38:03 +0200 Subject: thinkpad_acpi: fingers off backlight if video.ko is serving this functionality Signed-off-by: Thomas Renninger Acked-by: Zhang Rui Acked-by: Henrique de Moraes Holschuh Signed-off-by: Andi Kleen Signed-off-by: Len Brown --- drivers/misc/thinkpad_acpi.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 4db1cf9078d..7a4a26b0edd 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -4932,16 +4932,25 @@ static int __init brightness_init(struct ibm_init_struct *iibm) */ b = tpacpi_check_std_acpi_brightness_support(); if (b > 0) { - if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { - printk(TPACPI_NOTICE - "Lenovo BIOS switched to ACPI backlight " - "control mode\n"); - } - if (brightness_enable > 1) { - printk(TPACPI_NOTICE - "standard ACPI backlight interface " - "available, not loading native one...\n"); - return 1; + + if (acpi_video_backlight_support()) { + if (brightness_enable > 1) { + printk(TPACPI_NOTICE + "Standard ACPI backlight interface " + "available, not loading native one.\n"); + return 1; + } else if (brightness_enable == 1) { + printk(TPACPI_NOTICE + "Backlight control force enabled, even if standard " + "ACPI backlight interface is available\n"); + } + } else { + if (brightness_enable > 1) { + printk(TPACPI_NOTICE + "Standard ACPI backlight interface not " + "available, thinkpad_acpi native " + "brightness control enabled\n"); + } } } -- cgit v1.2.3-70-g09d2 From 0c4b95455f250c7006af00208aefdf0f93f63144 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 7 Nov 2008 21:12:17 -0800 Subject: Staging: only build the tree if we really want to This Kconfig change allows the common 'make allmodconfig' and 'make allyesconfig' build options to skip the staging tree, which is probably what you want to have happen anyway. This makes the linux-next developer's life a lot easier so he doesn't have to worry about changes that break the staging tree, that's for me to worry about... Signed-off-by: Greg Kroah-Hartman --- drivers/staging/Kconfig | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index e1654f59eb7..0a49cd788a7 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -21,7 +21,23 @@ menuconfig STAGING If in doubt, say N here. -if STAGING + +config STAGING_EXCLUDE_BUILD + bool "Exclude Staging drivers from being built" + default y + ---help--- + Are you sure you really want to build the staging drivers? + They taint your kernel, don't live up to the normal Linux + kernel quality standards, are a bit crufty around the edges, + and might go off and kick your dog when you aren't paying + attention. + + Say N here to be able to select and build the Staging drivers. + This option is primarily here to prevent them from being built + when selecting 'make allyesconfg' and 'make allmodconfig' so + don't be all that put off, your dog will be just fine. + +if !STAGING_EXCLUDE_BUILD source "drivers/staging/et131x/Kconfig" @@ -45,4 +61,4 @@ source "drivers/staging/at76_usb/Kconfig" source "drivers/staging/poch/Kconfig" -endif # STAGING +endif # !STAGING_EXCLUDE_BUILD -- cgit v1.2.3-70-g09d2 From b8f6ec2e61f650fd1a316a207a00965bcb8805d4 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 29 Oct 2008 10:44:55 -0700 Subject: Staging: make usbip depend on CONFIG_NET Thanks to Randy Dunlap for finding this problem. Reported-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/usbip/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/usbip/Kconfig b/drivers/staging/usbip/Kconfig index 7426235ccc4..217fb7e62c2 100644 --- a/drivers/staging/usbip/Kconfig +++ b/drivers/staging/usbip/Kconfig @@ -1,6 +1,6 @@ config USB_IP_COMMON tristate "USB IP support (EXPERIMENTAL)" - depends on USB && EXPERIMENTAL + depends on USB && NET && EXPERIMENTAL default N ---help--- This enables pushing USB packets over IP to allow remote -- cgit v1.2.3-70-g09d2 From 0d12cdd5f883f508d33b85c1bae98fa28987c8c7 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 8 Nov 2008 16:19:55 +0100 Subject: sched: improve sched_clock() performance in scheduler-intense workloads native_read_tsc() overhead accounts for 20% of the system overhead: 659567 system_call 41222.9375 686796 schedule 435.7843 718382 __switch_to 665.1685 823875 switch_mm 4526.7857 1883122 native_read_tsc 55385.9412 9761990 total 2.8468 this is large part due to the rdtsc_barrier() that is done before and after reading the TSC. But sched_clock() is not a precise clock in the GTOD sense, using such barriers is completely pointless. So remove the barriers and only use them in vget_cycles(). This improves lat_ctx performance by about 5%. Signed-off-by: Ingo Molnar --- arch/x86/include/asm/msr.h | 2 -- arch/x86/include/asm/tsc.h | 8 +++++++- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index 46be2fa7ac2..c2a812ebde8 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -108,9 +108,7 @@ static __always_inline unsigned long long __native_read_tsc(void) { DECLARE_ARGS(val, low, high); - rdtsc_barrier(); asm volatile("rdtsc" : EAX_EDX_RET(val, low, high)); - rdtsc_barrier(); return EAX_EDX_VAL(val, low, high); } diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h index 38ae163cc91..9cd83a8e40d 100644 --- a/arch/x86/include/asm/tsc.h +++ b/arch/x86/include/asm/tsc.h @@ -34,6 +34,8 @@ static inline cycles_t get_cycles(void) static __always_inline cycles_t vget_cycles(void) { + cycles_t cycles; + /* * We only do VDSOs on TSC capable CPUs, so this shouldnt * access boot_cpu_data (which is not VDSO-safe): @@ -42,7 +44,11 @@ static __always_inline cycles_t vget_cycles(void) if (!cpu_has_tsc) return 0; #endif - return (cycles_t)__native_read_tsc(); + rdtsc_barrier(); + cycles = (cycles_t)__native_read_tsc(); + rdtsc_barrier(); + + return cycles; } extern void tsc_init(void); -- cgit v1.2.3-70-g09d2 From 7cbaef9c83e58bbd4bdd534b09052b6c5ec457d5 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 8 Nov 2008 17:05:38 +0100 Subject: sched: optimize sched_clock() a bit sched_clock() uses cycles_2_ns() needlessly - which is an irq-disabling variant of __cycles_2_ns(). Most of the time sched_clock() is called with irqs disabled already. The few places that call it with irqs enabled need to be updated. Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 2ef80e30192..424093b157d 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -55,7 +55,7 @@ u64 native_sched_clock(void) rdtscll(this_offset); /* return the value in ns */ - return cycles_2_ns(this_offset); + return __cycles_2_ns(this_offset); } /* We need to define a real function for sched_clock, to override the -- cgit v1.2.3-70-g09d2 From c5d712433ff57a66d8fb79a57a4fc7a7c3467b97 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 8 Nov 2008 13:53:33 +0100 Subject: Fix __pfn_to_page(pfn) for CONFIG_DISCONTIGMEM=y Fix the __pfn_to_page(pfn) macro so that it doesn't evaluate its argument twice in the CONFIG_DISCONTIGMEM=y case, because 'pfn' may be a result of a funtion call having side effects. For example, the hibernation code applies pfn_to_page(pfn) to the result of a function returning the pfn corresponding to the next set bit in a bitmap and the current bit position is modified on each call. This leads to "interesting" failures for CONFIG_DISCONTIGMEM=y due to the current behavior of __pfn_to_page(pfn). Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Linus Torvalds --- include/asm-generic/memory_model.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-generic/memory_model.h b/include/asm-generic/memory_model.h index ae060c62aff..18546d8eb78 100644 --- a/include/asm-generic/memory_model.h +++ b/include/asm-generic/memory_model.h @@ -34,7 +34,7 @@ #define __pfn_to_page(pfn) \ ({ unsigned long __pfn = (pfn); \ - unsigned long __nid = arch_pfn_to_nid(pfn); \ + unsigned long __nid = arch_pfn_to_nid(__pfn); \ NODE_DATA(__nid)->node_mem_map + arch_local_page_offset(__pfn, __nid);\ }) -- cgit v1.2.3-70-g09d2 From b41d6fee37e2bebd58ad3623c288197e75787905 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 4 Nov 2008 14:56:55 -0600 Subject: powerpc/fsl-booke: Fix synchronization bug w/local tlb invalidates The implemetation of _tlbil_pid() on Freescale Book-E cores needs an msync & isync after we flash invalidate the TLBs. This was causing the following oops reported by Sebastian Andrzej Siewior: VFS: Mounted root (nfs filesystem) readonly. Freeing unused kernel memory: 148k init BUG: sleeping function called from invalid context at /home/bigeasy/git/linux-2.6-powerpc/mm/mmap.c:234 in_atomic():1, irqs_disabled():0 Call Trace: [df189df0] [c0007160] show_stack+0x48/0x148 (unreliable) [df189e30] [c0029480] __might_sleep+0xf0/0x100 [df189e40] [c0070ac0] remove_vma+0x28/0x98 [df189e50] [c0070c1c] exit_mmap+0xec/0x128 [df189e80] [c002d2f4] mmput+0x54/0xec [df189ea0] [c0030b6c] exit_mm+0x10c/0x120 [df189ed0] [c003288c] do_exit+0x1ac/0x6e8 [df189f20] [c0032e48] do_group_exit+0x80/0xac [df189f40] [c000e9dc] ret_from_syscall+0x0/0x3c BUG: scheduling while atomic: udevd/956/0x10000002 Modules linked in: Call Trace: [df189df0] [c0007160] show_stack+0x48/0x148 (unreliable) [df189e30] [c002ac88] __schedule_bug+0x58/0x6c [df189e40] [c023e6cc] schedule+0xa8/0x4a8 [df189e90] [c002ad6c] __cond_resched+0x38/0x64 [df189ea0] [c023ebc8] _cond_resched+0x3c/0x58 [df189eb0] [c0030e70] put_files_struct+0x90/0xec [df189ed0] [c00328a8] do_exit+0x1c8/0x6e8 [df189f20] [c0032e48] do_group_exit+0x80/0xac [df189f40] [c000e9dc] ret_from_syscall+0x0/0x3c Signed-off-by: Kumar Gala --- arch/powerpc/kernel/misc_32.S | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 6a9b4bf0d17..bdc8b0e860e 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -470,6 +470,8 @@ _GLOBAL(_tlbil_pid) mfspr r3,SPRN_MMUCSR0 andi. r3,r3,MMUCSR0_TLBFI@l bne 1b + msync + isync blr /* @@ -486,6 +488,8 @@ _GLOBAL(_tlbil_va) rlwinm r4,r4,0,1,31 mtspr SPRN_MAS1,r4 tlbwe + msync + isync blr #endif /* CONFIG_FSL_BOOKE */ -- cgit v1.2.3-70-g09d2 From 0a0e9e0cb90170f95b4351597fd5c0e65fab6bc5 Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Wed, 5 Nov 2008 21:53:56 +0100 Subject: powerpc: Fix Book-E watchdog timer interval setting This patch fixes the setting of the Book-E watchdog timer interval setup on initialization and by ioctl(). On initialization the period bits have to be masked before setting a new period. In WDIOC_SETTIMEOUT ioctl we have to use the correct mask. Signed-off-by: Matthias Fuchs Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- drivers/watchdog/booke_wdt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index c3b78a76f17..225398fd504 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -42,8 +42,10 @@ u32 booke_wdt_period = WDT_PERIOD_DEFAULT; #ifdef CONFIG_FSL_BOOKE #define WDTP(x) ((((63-x)&0x3)<<30)|(((63-x)&0x3c)<<15)) +#define WDTP_MASK (WDTP(0)) #else #define WDTP(x) (TCR_WP(x)) +#define WDTP_MASK (TCR_WP_MASK) #endif static DEFINE_SPINLOCK(booke_wdt_lock); @@ -65,6 +67,7 @@ static void __booke_wdt_enable(void *data) /* clear status before enabling watchdog */ __booke_wdt_ping(NULL); val = mfspr(SPRN_TCR); + val &= ~WDTP_MASK; val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(booke_wdt_period)); mtspr(SPRN_TCR, val); @@ -114,7 +117,7 @@ static long booke_wdt_ioctl(struct file *file, case WDIOC_SETTIMEOUT: if (get_user(booke_wdt_period, p)) return -EFAULT; - mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WDTP(0)) | + mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WDTP_MASK) | WDTP(booke_wdt_period)); return 0; case WDIOC_GETTIMEOUT: -- cgit v1.2.3-70-g09d2 From 33d2d78baaed06dda9f4de105388832850fb3555 Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Fri, 7 Nov 2008 13:43:43 +0000 Subject: powerpc/86xx: Correct SOC bus-frequency in GE Fanuc SBC610 DTS This patch corrects the bus-frequency value provided in the SBC610's dts. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/gef_sbc610.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index 6ed608322dd..e48cfa740c8 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -108,7 +108,7 @@ compatible = "simple-bus"; ranges = <0x0 0xfef00000 0x00100000>; reg = <0xfef00000 0x100000>; // CCSRBAR 1M - bus-frequency = <0>; + bus-frequency = <33333333>; i2c1: i2c@3000 { #address-cells = <1>; -- cgit v1.2.3-70-g09d2 From 2b48706560cd4811654582a4a194c67a8562d602 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Sat, 8 Nov 2008 20:51:34 +0300 Subject: powerpc: Update QE/CPM2 usb_ctlr structures for USB support Fixes following build error: CC drivers/usb/gadget/fsl_qe_udc.o drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_eprx_stall_change': drivers/usb/gadget/fsl_qe_udc.c:156: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c:163: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_eptx_stall_change': drivers/usb/gadget/fsl_qe_udc.c:173: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c:180: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_eprx_nack': drivers/usb/gadget/fsl_qe_udc.c:201: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c:201: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_eprx_normal': drivers/usb/gadget/fsl_qe_udc.c:218: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c:218: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_ep_reset': drivers/usb/gadget/fsl_qe_udc.c:325: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c:342: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c: In function 'qe_ep_register_init': drivers/usb/gadget/fsl_qe_udc.c:515: error: 'struct usb_ctlr' has no member named 'usb_usep' drivers/usb/gadget/fsl_qe_udc.c: In function 'ch9getstatus': drivers/usb/gadget/fsl_qe_udc.c:1981: error: 'struct usb_ctlr' has no member named 'usb_usep' make[2]: *** [drivers/usb/gadget/fsl_qe_udc.o] Error 1 Signed-off-by: Li Yang Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/immap_cpm2.h | 9 +++------ arch/powerpc/include/asm/immap_qe.h | 5 +---- 2 files changed, 4 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/include/asm/immap_cpm2.h b/arch/powerpc/include/asm/immap_cpm2.h index 4080bab0468..d4f069bf0e5 100644 --- a/arch/powerpc/include/asm/immap_cpm2.h +++ b/arch/powerpc/include/asm/immap_cpm2.h @@ -554,14 +554,11 @@ typedef struct usb_ctlr { u8 usb_usadr; u8 usb_uscom; u8 res1[1]; - u16 usb_usep1; - u16 usb_usep2; - u16 usb_usep3; - u16 usb_usep4; + __be16 usb_usep[4]; u8 res2[4]; - u16 usb_usber; + __be16 usb_usber; u8 res3[2]; - u16 usb_usbmr; + __be16 usb_usbmr; u8 usb_usbs; u8 res4[7]; } usb_cpm2_t; diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h index 3c2fced3ac2..c346d0bcd23 100644 --- a/arch/powerpc/include/asm/immap_qe.h +++ b/arch/powerpc/include/asm/immap_qe.h @@ -215,10 +215,7 @@ struct usb_ctlr { u8 usb_usadr; u8 usb_uscom; u8 res1[1]; - __be16 usb_usep1; - __be16 usb_usep2; - __be16 usb_usep3; - __be16 usb_usep4; + __be16 usb_usep[4]; u8 res2[4]; __be16 usb_usber; u8 res3[2]; -- cgit v1.2.3-70-g09d2 From ea37194d680ff62c5cd187b40d6ea78fa2631ec1 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 8 Nov 2008 12:32:41 -0600 Subject: powerpc: Updated Freescale PPC related defconfigs unset CONFIG_PCI_LEGACY in the defconfigs as none of them enable ISDN drivers which seem to be the only place we are using pci_find_device Signed-off-by: Kumar Gala --- arch/powerpc/configs/83xx/asp8347_defconfig | 121 ++++++---- arch/powerpc/configs/83xx/mpc8313_rdb_defconfig | 158 +++++++----- arch/powerpc/configs/83xx/mpc8315_rdb_defconfig | 158 +++++++----- arch/powerpc/configs/83xx/mpc832x_mds_defconfig | 125 ++++++---- arch/powerpc/configs/83xx/mpc832x_rdb_defconfig | 136 ++++++----- arch/powerpc/configs/83xx/mpc834x_itx_defconfig | 171 +++++++++---- arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig | 121 ++++++---- arch/powerpc/configs/83xx/mpc834x_mds_defconfig | 123 ++++++---- arch/powerpc/configs/83xx/mpc836x_mds_defconfig | 126 ++++++---- arch/powerpc/configs/83xx/mpc836x_rdk_defconfig | 119 +++++---- arch/powerpc/configs/83xx/mpc837x_mds_defconfig | 123 ++++++---- arch/powerpc/configs/83xx/mpc837x_rdb_defconfig | 155 +++++++----- arch/powerpc/configs/83xx/sbc834x_defconfig | 119 +++++---- arch/powerpc/configs/85xx/ksi8560_defconfig | 87 ++++--- arch/powerpc/configs/85xx/mpc8536_ds_defconfig | 143 +++++++++-- arch/powerpc/configs/85xx/mpc8540_ads_defconfig | 74 ++++-- arch/powerpc/configs/85xx/mpc8544_ds_defconfig | 143 +++++++++-- arch/powerpc/configs/85xx/mpc8560_ads_defconfig | 90 +++++-- arch/powerpc/configs/85xx/mpc8568mds_defconfig | 93 +++++-- arch/powerpc/configs/85xx/mpc8572_ds_defconfig | 143 +++++++++-- arch/powerpc/configs/85xx/mpc85xx_cds_defconfig | 91 +++++-- arch/powerpc/configs/85xx/sbc8548_defconfig | 75 ++++-- arch/powerpc/configs/85xx/sbc8560_defconfig | 78 ++++-- arch/powerpc/configs/85xx/stx_gp3_defconfig | 115 ++++++--- arch/powerpc/configs/85xx/tqm8540_defconfig | 91 +++++-- arch/powerpc/configs/85xx/tqm8541_defconfig | 96 +++++--- arch/powerpc/configs/85xx/tqm8548_defconfig | 98 ++++++-- arch/powerpc/configs/85xx/tqm8555_defconfig | 96 +++++--- arch/powerpc/configs/85xx/tqm8560_defconfig | 96 +++++--- arch/powerpc/configs/86xx/gef_sbc610_defconfig | 281 ++++++++++++++++------ arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig | 177 ++++++++++---- arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig | 175 ++++++++++---- arch/powerpc/configs/86xx/sbc8641d_defconfig | 152 +++++++----- arch/powerpc/configs/adder875_defconfig | 69 ++++-- arch/powerpc/configs/c2k_defconfig | 179 ++++++++------ arch/powerpc/configs/ep8248e_defconfig | 113 +++++---- arch/powerpc/configs/ep88xc_defconfig | 67 ++++-- arch/powerpc/configs/linkstation_defconfig | 122 +++++++--- arch/powerpc/configs/mgcoge_defconfig | 234 ++++++++++++++---- arch/powerpc/configs/mgsuvd_defconfig | 107 +++++--- arch/powerpc/configs/mpc7448_hpc2_defconfig | 78 ++++-- arch/powerpc/configs/mpc8272_ads_defconfig | 113 +++++---- arch/powerpc/configs/mpc83xx_defconfig | 156 +++++++----- arch/powerpc/configs/mpc85xx_defconfig | 145 +++++++++-- arch/powerpc/configs/mpc866_ads_defconfig | 77 ++++-- arch/powerpc/configs/mpc86xx_defconfig | 144 +++++++++-- arch/powerpc/configs/mpc885_ads_defconfig | 67 ++++-- arch/powerpc/configs/pq2fads_defconfig | 137 ++++++----- arch/powerpc/configs/prpmc2800_defconfig | 126 +++++++--- arch/powerpc/configs/storcenter_defconfig | 83 ++++--- 50 files changed, 4234 insertions(+), 1932 deletions(-) diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index 0b1fa20f745..cbecaf3d790 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:01 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:49 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -54,8 +54,6 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_REDBOOT=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -99,7 +97,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -109,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -122,10 +121,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -158,6 +153,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -165,10 +161,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -188,24 +184,21 @@ CONFIG_ASP834x=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -225,6 +218,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -239,15 +234,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -259,7 +254,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -272,7 +266,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -340,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -360,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -470,7 +464,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -547,8 +540,6 @@ CONFIG_PHYLIB=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -559,8 +550,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -583,6 +578,7 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -667,14 +663,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -710,12 +703,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -753,6 +740,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -774,7 +762,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -829,7 +816,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -855,6 +841,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -907,6 +904,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -923,6 +922,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -930,6 +931,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -956,6 +958,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -972,7 +975,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1018,12 +1023,15 @@ CONFIG_RTC_DRV_DS1374=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1032,6 +1040,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1043,12 +1052,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1078,6 +1088,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1126,6 +1137,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1197,7 +1209,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1229,13 +1240,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1247,14 +1260,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1327,6 +1345,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index b7eae2bdf19..bfc32ea265a 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:17 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:50 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,24 +183,21 @@ CONFIG_MPC831x_RDB=y CONFIG_PPC_MPC831x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -224,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -238,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,7 +253,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -271,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -340,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -360,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -470,6 +464,7 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set CONFIG_MTD_NAND_FSL_ELBC=y +# CONFIG_MTD_NAND_FSL_UPM is not set # CONFIG_MTD_ONENAND is not set # @@ -482,7 +477,6 @@ CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -583,13 +577,12 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -638,8 +631,6 @@ CONFIG_CICADA_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -651,6 +642,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -671,6 +665,7 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -693,18 +688,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -790,14 +789,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -833,12 +829,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -876,6 +866,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -913,7 +904,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -935,6 +925,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -969,7 +960,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -995,6 +985,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1037,12 +1038,18 @@ CONFIG_HID=y # USB Input Devices # # CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1061,6 +1068,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1084,6 +1093,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # CONFIG_USB_GADGET_MUSB_HDRC is not set # @@ -1092,6 +1103,7 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1113,7 +1125,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1134,6 +1145,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1151,23 +1163,26 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set -CONFIG_USB_GADGET_NET2280=y -CONFIG_USB_NET2280=y -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +CONFIG_USB_GADGET_NET2280=y +CONFIG_USB_NET2280=y +# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set @@ -1179,6 +1194,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1224,17 +1240,21 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1243,6 +1263,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1254,12 +1275,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1289,6 +1311,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1337,6 +1360,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1373,7 +1397,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1427,15 +1450,23 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1444,6 +1475,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1455,14 +1487,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1535,6 +1572,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index b0a27a67d8c..aad0e1a98c5 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:18 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:51 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,24 +183,21 @@ CONFIG_MPC831x_RDB=y CONFIG_PPC_MPC831x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -224,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -238,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,7 +253,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -271,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -340,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -360,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -470,6 +464,7 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_NAND_FSL_ELBC is not set +# CONFIG_MTD_NAND_FSL_UPM is not set # CONFIG_MTD_ONENAND is not set # @@ -482,7 +477,6 @@ CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -584,8 +578,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -651,6 +643,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -699,8 +692,6 @@ CONFIG_PHYLIB=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -712,6 +703,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -732,6 +726,7 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -754,18 +749,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -851,14 +850,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -894,12 +890,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -937,6 +927,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -974,7 +965,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -996,6 +986,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -1030,7 +1021,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -1056,6 +1046,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1098,12 +1099,18 @@ CONFIG_HID=y # USB Input Devices # # CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1122,6 +1129,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1145,6 +1154,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # CONFIG_USB_GADGET_MUSB_HDRC is not set # @@ -1153,6 +1164,7 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1174,7 +1186,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1195,6 +1206,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1212,23 +1224,26 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set -CONFIG_USB_GADGET_NET2280=y -CONFIG_USB_NET2280=y -# CONFIG_USB_GADGET_PXA25X is not set -# CONFIG_USB_GADGET_M66592 is not set -# CONFIG_USB_GADGET_PXA27X is not set -# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +CONFIG_USB_GADGET_NET2280=y +CONFIG_USB_NET2280=y +# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set @@ -1240,6 +1255,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1285,17 +1301,21 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1304,6 +1324,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1315,12 +1336,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1350,6 +1372,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1398,6 +1421,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1434,7 +1458,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1488,15 +1511,23 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1505,6 +1536,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1516,14 +1548,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1596,6 +1633,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index ad825bcddd1..9cb8c8b956e 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:18 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:53 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,24 +183,20 @@ CONFIG_MPC832x_MDS=y CONFIG_PPC_MPC832x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set CONFIG_QUICC_ENGINE=y +# CONFIG_QE_GPIO is not set # CONFIG_FSL_ULI1575 is not set # @@ -225,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -240,15 +234,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -260,7 +254,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -273,7 +266,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -341,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -361,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -391,7 +384,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -491,8 +483,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set @@ -537,8 +527,6 @@ CONFIG_DAVICOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -549,8 +537,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -577,18 +569,22 @@ CONFIG_UCC_GETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -665,15 +661,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -709,12 +702,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -751,6 +738,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -772,7 +760,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -827,7 +814,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -848,6 +834,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -884,6 +881,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -900,6 +903,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -945,12 +949,15 @@ CONFIG_RTC_DRV_DS1374=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -959,6 +966,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -970,12 +978,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1005,6 +1014,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1042,6 +1052,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1071,13 +1082,11 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y -# CONFIG_QE_GPIO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1107,13 +1116,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1125,14 +1136,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1205,6 +1221,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index 38267501f44..9cc976f010c 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:19 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:54 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,24 +183,20 @@ CONFIG_MPC832x_RDB=y CONFIG_PPC_MPC832x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set CONFIG_QUICC_ENGINE=y +# CONFIG_QE_GPIO is not set # CONFIG_FSL_ULI1575 is not set # @@ -225,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -240,15 +234,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -260,7 +254,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -273,7 +266,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -341,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -361,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -392,7 +385,6 @@ CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -493,8 +485,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set @@ -539,8 +529,6 @@ CONFIG_ICPLUS_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -552,13 +540,16 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -581,18 +572,22 @@ CONFIG_UCC_GETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -678,15 +673,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -724,12 +716,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -767,6 +753,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -803,7 +790,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -825,6 +811,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -859,7 +846,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -885,6 +871,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -927,12 +924,18 @@ CONFIG_HID=y # USB Input Devices # # CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -951,6 +954,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -974,6 +979,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -981,6 +988,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1002,7 +1010,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1023,6 +1030,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1040,13 +1048,15 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y @@ -1054,7 +1064,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set @@ -1068,6 +1078,7 @@ CONFIG_MMC_SPI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1079,12 +1090,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1117,6 +1129,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1154,6 +1167,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1227,13 +1241,11 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y -# CONFIG_QE_GPIO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1263,13 +1275,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1281,14 +1295,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1361,6 +1380,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 90aab340e7f..e55ff7c47a3 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:20 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:56 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,24 +183,21 @@ CONFIG_MPC834x_ITX=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -224,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -238,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,7 +253,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -271,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -339,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -359,11 +354,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -469,7 +463,6 @@ CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -496,7 +489,54 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -# CONFIG_BLK_DEV_IDE is not set + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_BLK_DEV_IDEDMA is not set # # SCSI device support @@ -572,8 +612,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -640,6 +678,7 @@ CONFIG_PATA_OF_PLATFORM=y # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -709,18 +748,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -786,14 +829,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -829,12 +869,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -872,6 +906,7 @@ CONFIG_SENSORS_PCF8574=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -907,7 +942,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -933,6 +967,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -984,6 +1029,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1000,6 +1047,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1007,6 +1056,7 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1027,7 +1077,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1048,6 +1097,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1065,7 +1115,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1111,17 +1163,21 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1130,6 +1186,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1141,12 +1198,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1179,6 +1237,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1217,6 +1276,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1292,7 +1352,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1322,13 +1381,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1340,14 +1401,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1420,6 +1486,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index 7458a242d25..426232cb009 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:21 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:57 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,24 +183,21 @@ CONFIG_MPC834x_ITX=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -224,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -238,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,7 +253,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -271,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -339,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -359,11 +354,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -469,7 +463,6 @@ CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -570,8 +563,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set @@ -637,18 +628,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -714,14 +709,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -757,12 +749,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -800,6 +786,7 @@ CONFIG_SENSORS_PCF8574=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -835,7 +822,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -861,6 +847,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -912,6 +909,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -928,6 +927,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -935,6 +936,7 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -955,7 +957,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -976,6 +977,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -992,7 +994,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1038,17 +1042,21 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1057,6 +1065,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1068,12 +1077,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1106,6 +1116,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1144,6 +1155,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1219,7 +1231,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1249,13 +1260,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1267,14 +1280,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1347,6 +1365,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index 1a92798938c..36e2e93a1c5 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:21 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:58 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,24 +183,21 @@ CONFIG_MPC834x_MDS=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -224,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -238,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,7 +253,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -271,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -339,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -359,11 +354,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -389,7 +383,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -465,8 +458,6 @@ CONFIG_MARVELL_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -477,6 +468,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -497,6 +491,7 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -519,18 +514,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -606,14 +605,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -649,12 +645,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -691,6 +681,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -712,7 +703,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -767,7 +757,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -788,6 +777,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -824,6 +824,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -840,6 +846,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -885,12 +892,15 @@ CONFIG_RTC_DRV_DS1374=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -899,6 +909,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -910,12 +921,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -945,6 +957,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -982,6 +995,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1014,7 +1028,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1044,13 +1057,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1062,14 +1077,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1142,6 +1162,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index 03d8cede027..80eb6c9a05c 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:22 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:59 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -164,10 +160,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -186,24 +182,20 @@ CONFIG_MPC836x_MDS=y # CONFIG_ASP834x is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set CONFIG_QUICC_ENGINE=y +# CONFIG_QE_GPIO is not set # CONFIG_FSL_ULI1575 is not set # @@ -224,6 +216,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -238,15 +232,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,7 +252,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -271,7 +264,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -339,6 +332,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -359,11 +353,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -466,7 +459,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -566,8 +558,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set @@ -612,8 +602,6 @@ CONFIG_MARVELL_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -624,8 +612,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -652,18 +644,22 @@ CONFIG_UCC_GETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -740,15 +736,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -784,12 +777,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -826,6 +813,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -847,7 +835,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -902,7 +889,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -923,6 +909,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -959,6 +956,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -975,6 +978,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1020,12 +1024,15 @@ CONFIG_RTC_DRV_DS1374=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1034,6 +1041,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1045,12 +1053,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1080,6 +1089,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1096,6 +1106,7 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1117,6 +1128,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1146,13 +1158,11 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y -# CONFIG_QE_GPIO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1182,13 +1192,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1200,14 +1212,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1280,6 +1297,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index cdf84177370..b9b236806e9 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:24 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:00 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -54,8 +54,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -99,7 +97,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -109,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -122,10 +121,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -158,6 +153,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -165,10 +161,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -187,31 +183,26 @@ CONFIG_MPC836x_RDK=y # CONFIG_ASP834x is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set CONFIG_QUICC_ENGINE=y +CONFIG_QE_GPIO=y # CONFIG_FSL_ULI1575 is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -225,6 +216,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -239,15 +232,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -259,7 +252,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -274,7 +266,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -342,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -362,11 +355,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -480,7 +472,6 @@ CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -581,6 +572,7 @@ CONFIG_UCC_GETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -660,15 +652,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_SERIAL_QE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -705,12 +694,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -749,6 +732,7 @@ CONFIG_I2C_MPC=y # CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -804,7 +788,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -825,6 +808,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -852,6 +846,7 @@ CONFIG_DAB=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -874,9 +869,6 @@ CONFIG_FB_MACMODES=y # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set # CONFIG_FB_CT65550 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set @@ -891,6 +883,7 @@ CONFIG_FB_OF=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -903,6 +896,7 @@ CONFIG_FB_OF=y # CONFIG_FB_FSL_DIU is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -930,7 +924,14 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -940,6 +941,7 @@ CONFIG_HID=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -951,12 +953,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -986,6 +989,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1034,6 +1038,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1064,13 +1069,11 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_UCC_SLOW=y CONFIG_UCC_FAST=y CONFIG_UCC=y -CONFIG_QE_GPIO=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1102,13 +1105,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1116,7 +1121,7 @@ CONFIG_HAVE_ARCH_KGDB=y CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_LPAR is not set # CONFIG_PPC_EARLY_DEBUG_G5 is not set -CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL=y +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set # CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set # CONFIG_PPC_EARLY_DEBUG_MAPLE is not set # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set @@ -1131,14 +1136,19 @@ CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1211,6 +1221,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index 97e02d7a5b0..f6350d7e168 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:23 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:00 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -99,7 +97,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -109,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -122,10 +121,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -158,6 +153,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -165,10 +161,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -188,30 +184,26 @@ CONFIG_MPC837x_MDS=y CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -225,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -239,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -259,7 +253,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -272,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -340,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -360,11 +354,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -390,7 +383,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -491,8 +483,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -597,8 +587,6 @@ CONFIG_MARVELL_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -609,8 +597,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -633,18 +625,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -721,14 +717,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -766,12 +759,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -808,6 +795,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -829,7 +817,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -884,7 +871,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -905,6 +891,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -941,6 +938,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -957,6 +960,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -966,6 +970,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -977,12 +982,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1012,6 +1018,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1049,6 +1056,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1085,7 +1093,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1113,13 +1120,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1131,14 +1140,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1211,6 +1225,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 5ac33054ce2..f447de16f75 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:25 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:01 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -99,7 +97,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -109,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -122,10 +121,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -158,6 +153,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -165,10 +161,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -188,30 +184,26 @@ CONFIG_MPC837x_RDB=y CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -225,6 +217,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -239,15 +233,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -259,7 +253,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -272,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -335,6 +328,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -355,11 +349,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -385,7 +378,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -487,8 +479,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -554,6 +544,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set CONFIG_MD_RAID1=y @@ -603,8 +594,6 @@ CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -615,8 +604,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -639,6 +632,7 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -673,7 +667,7 @@ CONFIG_GIANFAR=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -724,14 +718,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -769,12 +760,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -812,6 +797,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -833,7 +819,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -888,7 +873,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -914,6 +898,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -956,9 +951,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -977,6 +999,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -993,6 +1017,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1000,6 +1026,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1028,6 +1055,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1044,7 +1072,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1054,6 +1084,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1065,12 +1096,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1100,6 +1132,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1137,6 +1170,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1173,7 +1207,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1201,13 +1234,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1219,6 +1254,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y @@ -1229,8 +1265,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1303,6 +1343,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index c359cc2a380..8d2d7eeab5f 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:27 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:02 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -53,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -98,7 +96,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -108,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -120,10 +119,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -156,6 +151,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -163,10 +159,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -186,30 +182,26 @@ CONFIG_SBC834x=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -223,6 +215,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -237,15 +231,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -257,7 +251,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -270,7 +263,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -338,6 +331,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -358,11 +352,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -388,7 +381,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -464,8 +456,6 @@ CONFIG_BROADCOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -476,8 +466,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -500,6 +494,7 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -575,14 +570,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -620,12 +612,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -662,6 +648,7 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -683,7 +670,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -738,7 +724,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -759,6 +744,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -795,7 +791,14 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -805,16 +808,18 @@ CONFIG_HID=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -844,6 +849,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -881,6 +887,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -893,7 +900,6 @@ CONFIG_RPCSEC_GSS_KRB5=y # Partition Types # # CONFIG_PARTITION_ADVANCED is not set -CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set @@ -902,7 +908,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -930,13 +935,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -948,14 +955,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1028,6 +1040,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index 8bb89f26a20..1af7b9e37b6 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:28 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:03 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -104,6 +104,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -117,10 +118,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -147,6 +145,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -181,15 +180,16 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # CONFIG_HIGHMEM=y -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -203,6 +203,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -217,15 +219,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -311,6 +313,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -331,11 +334,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -454,17 +456,16 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_IDEDISK is not set -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -515,6 +516,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -590,12 +594,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -659,6 +657,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -692,6 +698,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -715,6 +727,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -726,13 +739,14 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -762,6 +776,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -797,6 +812,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -829,7 +845,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -882,15 +897,23 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -899,6 +922,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -910,12 +934,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -987,6 +1013,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_TALITOS is not set CONFIG_PPC_CLOCK=y diff --git a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig index 6b516bea6e7..e243e14a670 100644 --- a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 07:18:18 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:05 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -124,10 +126,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -160,6 +158,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -194,8 +193,10 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -215,6 +216,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -229,15 +232,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -260,7 +263,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -362,6 +365,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -382,12 +386,11 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -633,8 +636,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -658,18 +665,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -704,7 +715,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -872,6 +883,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -912,7 +934,6 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_CINERGYT2 is not set # CONFIG_DVB_SIANO_SMS1XXX is not set # @@ -929,6 +950,11 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # CONFIG_DVB_PLUTO2 is not set +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + # # Supported DVB Frontends # @@ -945,6 +971,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_CX24123 is not set # CONFIG_DVB_MT312 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set @@ -952,6 +980,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TUNER_ITD1000 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set # # DVB-T (terrestrial) frontends @@ -1004,6 +1034,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_LNBP21 is not set # CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1029,6 +1066,7 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1127,9 +1165,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1148,6 +1213,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1171,6 +1238,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1178,6 +1247,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1199,7 +1269,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1220,6 +1289,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1237,7 +1307,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1283,12 +1355,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1309,6 +1384,7 @@ CONFIG_DMA_ENGINE=y # CONFIG_NET_DMA is not set # CONFIG_DMATEST is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1320,13 +1396,14 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1364,6 +1441,7 @@ CONFIG_NTFS_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1408,6 +1486,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1483,7 +1562,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1537,15 +1615,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1554,6 +1640,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -1565,16 +1652,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1647,6 +1737,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index 1ea181f826f..d790cbab80b 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:30 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:06 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -107,6 +107,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -120,10 +121,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -150,6 +147,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -184,8 +182,10 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -205,6 +205,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -219,15 +221,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -313,6 +315,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -333,11 +336,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -421,6 +423,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y CONFIG_GIANFAR=y @@ -544,6 +549,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -577,6 +590,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -600,6 +619,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -611,12 +631,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -646,6 +667,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -680,6 +702,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -712,7 +735,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -764,15 +786,23 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -781,6 +811,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -791,12 +822,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -868,6 +901,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig index 1aecdeab984..f6cb01495ea 100644 --- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 07:20:43 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:08 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -124,10 +126,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -160,6 +158,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -194,8 +193,10 @@ CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set CONFIG_FSL_ULI1575=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -215,6 +216,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -229,15 +232,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -261,7 +264,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -363,6 +366,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -383,12 +387,11 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -634,8 +637,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -657,18 +664,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -703,7 +714,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -872,6 +883,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -912,7 +934,6 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_CINERGYT2 is not set # CONFIG_DVB_SIANO_SMS1XXX is not set # @@ -929,6 +950,11 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # CONFIG_DVB_PLUTO2 is not set +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + # # Supported DVB Frontends # @@ -945,6 +971,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_CX24123 is not set # CONFIG_DVB_MT312 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set @@ -952,6 +980,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TUNER_ITD1000 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set # # DVB-T (terrestrial) frontends @@ -1004,6 +1034,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_LNBP21 is not set # CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1029,6 +1066,7 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1129,9 +1167,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1150,6 +1215,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1173,6 +1240,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1180,6 +1249,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1201,7 +1271,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1222,6 +1291,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1239,7 +1309,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1285,12 +1357,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1311,6 +1386,7 @@ CONFIG_DMA_ENGINE=y # CONFIG_NET_DMA is not set # CONFIG_DMATEST is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1322,12 +1398,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1365,6 +1442,7 @@ CONFIG_NTFS_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1409,6 +1487,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1484,7 +1563,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1538,15 +1616,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1555,6 +1641,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1565,16 +1652,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1647,6 +1737,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 06e26d906f6..6cf929259ba 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:32 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:09 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -108,7 +108,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +123,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +150,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -185,15 +185,16 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -207,6 +208,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -221,15 +224,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -252,7 +255,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -322,6 +325,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -342,11 +346,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -459,8 +462,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -469,7 +476,6 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -487,18 +493,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -571,12 +581,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -CONFIG_SERIAL_CPM_SCC2=y -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y @@ -648,6 +652,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -683,6 +695,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -699,6 +717,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -708,6 +727,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -719,12 +739,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -754,6 +775,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -788,6 +810,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -820,7 +843,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -872,15 +894,23 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -889,6 +919,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -899,12 +930,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -976,6 +1009,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig index dc27c74955f..597be849181 100644 --- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:33 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:11 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -105,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -118,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -154,6 +152,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -189,8 +188,10 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_QUICC_ENGINE=y +# CONFIG_QE_GPIO is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -210,6 +211,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -224,15 +227,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -255,7 +258,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -325,6 +328,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -345,11 +349,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -530,8 +533,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -554,18 +561,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -815,6 +826,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -851,6 +873,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -867,6 +895,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -912,12 +941,15 @@ CONFIG_RTC_DRV_DS1374=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -926,6 +958,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -937,12 +970,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -972,6 +1006,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1009,6 +1044,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1036,13 +1072,11 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_QE_GPIO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1094,15 +1128,23 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1111,6 +1153,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1132,14 +1175,19 @@ CONFIG_PPC_EARLY_DEBUG=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1212,6 +1260,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig index eda45bb8a13..635588319e0 100644 --- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 07:21:42 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:13 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -124,10 +126,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -160,6 +158,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -194,8 +193,10 @@ CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set CONFIG_FSL_ULI1575=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -215,6 +216,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -229,15 +232,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -261,7 +264,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -363,6 +366,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -383,12 +387,11 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -634,8 +637,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -657,18 +664,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -703,7 +714,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -872,6 +883,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -912,7 +934,6 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_CINERGYT2 is not set # CONFIG_DVB_SIANO_SMS1XXX is not set # @@ -929,6 +950,11 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # CONFIG_DVB_PLUTO2 is not set +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + # # Supported DVB Frontends # @@ -945,6 +971,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_CX24123 is not set # CONFIG_DVB_MT312 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set @@ -952,6 +980,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TUNER_ITD1000 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set # # DVB-T (terrestrial) frontends @@ -1004,6 +1034,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_LNBP21 is not set # CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1029,6 +1066,7 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1129,9 +1167,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1150,6 +1215,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1173,6 +1240,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1180,6 +1249,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1201,7 +1271,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1222,6 +1291,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1239,7 +1309,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1285,12 +1357,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1299,6 +1374,7 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1310,12 +1386,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1353,6 +1430,7 @@ CONFIG_NTFS_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1397,6 +1475,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1472,7 +1551,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1526,15 +1604,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1543,6 +1629,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1553,16 +1640,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1635,6 +1725,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index 97f3c4fe440..8769359dfe6 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:34 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:14 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -107,7 +107,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -120,10 +122,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -150,6 +148,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -184,8 +183,10 @@ CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -205,6 +206,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -219,15 +222,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -250,7 +253,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -320,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -340,11 +344,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -396,18 +399,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_IDEDISK is not set -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -510,13 +512,16 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -534,18 +539,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -678,6 +687,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -713,6 +730,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -729,6 +752,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -738,6 +762,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -749,12 +774,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -784,6 +810,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -818,6 +845,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -850,7 +878,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -902,15 +929,23 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -919,6 +954,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -929,12 +965,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1006,6 +1044,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 41cedc4b63f..bfe3c973157 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:35 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:16 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -106,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -118,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -148,6 +146,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -182,14 +181,15 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -203,6 +203,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -217,15 +219,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -248,7 +250,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -317,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -337,11 +340,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -451,8 +453,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -474,18 +480,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -618,6 +628,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -651,6 +669,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -660,16 +679,18 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -699,6 +720,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -733,6 +755,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -753,7 +776,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -781,13 +803,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -798,12 +822,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -875,6 +901,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index daef36f41b4..8c507f8d15a 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:36 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:17 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -107,6 +107,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -119,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -149,6 +146,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -183,14 +181,15 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -204,6 +203,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -218,15 +219,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -312,6 +313,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -332,11 +334,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -420,6 +421,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y CONFIG_GIANFAR=y @@ -541,6 +545,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -574,6 +586,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -617,12 +635,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set CONFIG_RTC_DRV_M48T59=y +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -631,16 +652,18 @@ CONFIG_RTC_DRV_M48T59=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -670,6 +693,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -704,6 +728,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -736,7 +761,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -787,15 +811,23 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -804,6 +836,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -825,12 +858,14 @@ CONFIG_PPC_EARLY_DEBUG=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -902,6 +937,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index 2b05d43f8f7..5a0cf58d2b8 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:37 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:19 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -108,7 +108,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -122,10 +124,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +156,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -191,15 +191,16 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # CONFIG_HIGHMEM=y -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -213,6 +214,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -227,15 +230,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,7 +261,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -319,7 +322,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -335,44 +337,46 @@ CONFIG_NETFILTER_ADVANCED=y CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m -# CONFIG_IP_NF_MATCH_RECENT is not set -# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set # CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_TARGET_REJECT is not set # CONFIG_IP_NF_TARGET_LOG is not set @@ -385,6 +389,7 @@ CONFIG_IP_NF_FILTER=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -405,11 +410,10 @@ CONFIG_NET_PKTGEN=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -470,18 +474,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -651,9 +654,13 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_NET_POCKET is not set +# CONFIG_ATL2 is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -676,18 +683,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -746,6 +757,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -791,12 +803,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -CONFIG_SERIAL_CPM_SCC2=y -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y @@ -980,6 +986,16 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1019,12 +1035,19 @@ CONFIG_DRM=m # # CONFIG_DISPLAY_SUPPORT is not set CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set # CONFIG_SND is not set # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1041,6 +1064,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1051,6 +1075,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1062,12 +1087,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1103,6 +1129,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1139,6 +1166,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1199,7 +1227,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=m @@ -1253,15 +1280,23 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1270,6 +1305,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y @@ -1280,12 +1316,14 @@ CONFIG_BDI_SWITCH=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1358,6 +1396,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index 1b2d5d57791..f3e4f3481fd 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:37 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:20 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -105,7 +105,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -118,10 +120,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -148,6 +146,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -183,14 +182,15 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -204,6 +204,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -218,15 +220,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -249,7 +251,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_HAS_RAPIDIO is not set # @@ -316,6 +318,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -336,11 +339,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -466,18 +468,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -580,6 +581,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -600,6 +604,7 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -621,18 +626,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -867,6 +876,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -903,6 +923,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -919,6 +945,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -928,6 +955,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -939,12 +967,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -974,6 +1003,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1019,6 +1049,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1051,7 +1082,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1083,13 +1113,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1100,12 +1132,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1177,6 +1211,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index da841a09755..c6248939453 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:39 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:21 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -106,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -119,10 +121,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -149,6 +148,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -184,15 +184,16 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -206,6 +207,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -220,15 +223,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -251,7 +254,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_HAS_RAPIDIO is not set # @@ -318,6 +321,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -338,11 +342,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -469,18 +472,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -583,6 +585,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -603,6 +608,7 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -625,18 +631,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -715,12 +725,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y @@ -900,6 +904,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -936,6 +951,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -952,6 +973,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -961,6 +983,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -972,12 +995,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1007,6 +1031,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1052,6 +1077,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1084,7 +1110,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1116,13 +1141,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1133,12 +1160,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1210,6 +1239,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index ca1234d2685..eef45b97dc3 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:40 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:22 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -107,7 +107,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -121,10 +123,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -157,6 +155,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -192,8 +191,10 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -213,6 +214,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -227,15 +230,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -260,7 +263,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -330,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -350,11 +354,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -458,6 +461,7 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_NAND_FSL_ELBC is not set +# CONFIG_MTD_NAND_FSL_UPM is not set # CONFIG_MTD_ONENAND is not set # @@ -502,18 +506,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_IDEDISK is not set -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -616,13 +619,16 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -640,18 +646,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -885,6 +895,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -921,6 +942,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -937,6 +964,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -982,12 +1010,15 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -996,6 +1027,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1007,12 +1039,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1042,6 +1075,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1078,6 +1112,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1110,7 +1145,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1162,15 +1196,23 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1179,6 +1221,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1189,12 +1232,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1267,6 +1312,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index dcf9cfe28b5..11b637e99a5 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:42 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:23 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -106,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -119,10 +121,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -149,6 +148,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -184,15 +184,16 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -206,6 +207,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -220,15 +223,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -251,7 +254,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_HAS_RAPIDIO is not set # @@ -318,6 +321,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -338,11 +342,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -469,18 +472,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -583,6 +585,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -603,6 +608,7 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -625,18 +631,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -715,12 +725,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y @@ -900,6 +904,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -936,6 +951,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -952,6 +973,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -961,6 +983,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -972,12 +995,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1007,6 +1031,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1052,6 +1077,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1084,7 +1110,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1116,13 +1141,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1133,12 +1160,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1210,6 +1239,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index 8d676629cdb..2519169b6d4 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:43 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:25 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -106,7 +106,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -119,10 +121,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -149,6 +148,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -184,15 +184,16 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -206,6 +207,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -220,15 +223,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -251,7 +254,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_HAS_RAPIDIO is not set # @@ -318,6 +321,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -338,11 +342,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -469,18 +472,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -583,6 +585,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -603,6 +608,7 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -625,18 +631,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -715,12 +725,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y @@ -900,6 +904,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -936,6 +951,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -952,6 +973,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -961,6 +983,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -972,12 +995,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1007,6 +1031,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1052,6 +1077,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1084,7 +1110,6 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1116,13 +1141,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1133,12 +1160,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1210,6 +1239,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 312d7afbbe4..2da13e00a80 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Wed Jun 11 12:06:53 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:30 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y @@ -23,7 +24,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y @@ -92,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -109,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -117,10 +120,13 @@ CONFIG_SLAB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -138,6 +144,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -152,6 +159,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -159,15 +167,16 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set # CONFIG_PPC_PMAC is not set -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -CONFIG_PPC_86xx=y -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set # CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set # CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set @@ -184,7 +193,10 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -199,17 +211,20 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y # CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -219,17 +234,19 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -242,6 +259,7 @@ CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -250,7 +268,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -270,10 +288,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -287,6 +301,7 @@ CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -325,7 +340,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -362,8 +376,8 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set @@ -372,37 +386,39 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m # CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -411,6 +427,7 @@ CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_ECN=m # CONFIG_IP_NF_TARGET_TTL is not set CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_SECURITY is not set CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m @@ -420,24 +437,21 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +# CONFIG_IP6_NF_MATCH_AH is not set +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -# CONFIG_IP6_NF_MATCH_AH is not set # CONFIG_IP6_NF_MATCH_MH is not set -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m - -# -# Bridge: Netfilter Configuration -# +# CONFIG_IP6_NF_SECURITY is not set # CONFIG_BRIDGE_NF_EBTABLES is not set # CONFIG_IP_DCCP is not set CONFIG_IP_SCTP=m @@ -456,8 +470,11 @@ CONFIG_ATM_LANE=m CONFIG_ATM_MPOA=m CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m +# CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set @@ -477,7 +494,7 @@ CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m -# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_MULTIQ is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -515,12 +532,11 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -646,12 +662,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -731,6 +749,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -798,12 +817,15 @@ CONFIG_SATA_SIL=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -840,14 +862,17 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -861,9 +886,11 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_GIANFAR=y -# CONFIG_GFAR_NAPI is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -895,7 +922,7 @@ CONFIG_ATM_DRIVERS=y # CONFIG_ATM_AMBASSADOR is not set # CONFIG_ATM_HORIZON is not set # CONFIG_ATM_IA is not set -# CONFIG_ATM_FORE200E_MAYBE is not set +# CONFIG_ATM_FORE200E is not set # CONFIG_ATM_HE is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -928,7 +955,7 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -962,6 +989,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -1000,43 +1028,64 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # CONFIG_DS1682=y +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -1045,10 +1094,13 @@ CONFIG_DS1682=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -1102,6 +1154,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1109,6 +1162,8 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_8xxx_WDT is not set # # PCI-based Watchdog Cards @@ -1130,8 +1185,21 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1171,10 +1239,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1185,9 +1249,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1205,6 +1296,9 @@ CONFIG_USB=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1225,6 +1319,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1232,6 +1328,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1261,7 +1358,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1274,7 +1370,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1291,8 +1387,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_ATM is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1325,6 +1423,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1334,12 +1433,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1348,6 +1450,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1361,12 +1464,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1399,6 +1503,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1419,6 +1524,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1429,14 +1535,14 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1502,9 +1608,9 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -1531,6 +1637,8 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1547,20 +1655,42 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1568,9 +1698,9 @@ CONFIG_DEBUGGER=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set -CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 @@ -1579,10 +1709,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m @@ -1621,6 +1753,10 @@ CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m @@ -1652,6 +1788,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index c98c6ee4449..72854a10dfa 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:10 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:28 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y @@ -22,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -52,8 +53,6 @@ CONFIG_PPC_UDBG_16550=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -99,7 +98,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -109,7 +107,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -123,10 +123,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -159,6 +155,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -166,10 +163,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -179,26 +176,24 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set # CONFIG_SBC8641D is not set CONFIG_MPC8610_HPCD=y +# CONFIG_GEF_SBC610 is not set CONFIG_MPC8610=y # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_FSL_ULI1575=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -218,6 +213,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -232,15 +229,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -252,7 +249,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -267,7 +263,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -353,6 +349,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -373,11 +370,10 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -493,7 +489,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -519,7 +514,54 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -# CONFIG_BLK_DEV_IDE is not set + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_BLK_DEV_IDEDMA is not set # # SCSI device support @@ -595,8 +637,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -685,8 +725,6 @@ CONFIG_DUMMY=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -703,8 +741,12 @@ CONFIG_ULI526X=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -796,13 +838,10 @@ CONFIG_SERIAL_8250_RSA=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -838,12 +877,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -907,6 +940,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -934,6 +978,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -956,9 +1001,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_OF is not set -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set # CONFIG_FB_CT65550 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set @@ -973,6 +1015,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -985,6 +1028,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_FSL_DIU=y # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1001,6 +1045,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set # CONFIG_LOGO is not set CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1082,11 +1127,10 @@ CONFIG_SND_PCI=y # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set CONFIG_SND_PPC=y -# CONFIG_SND_POWERMAC is not set -# CONFIG_SND_AOA is not set CONFIG_SND_SOC=y CONFIG_SND_SOC_MPC8610=y CONFIG_SND_SOC_MPC8610_HPCD=y +# CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_CS4270=y CONFIG_SND_SOC_CS4270_VD33_ERRATA=y # CONFIG_SOUND_PRIME is not set @@ -1094,6 +1138,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1110,6 +1160,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1155,12 +1206,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1169,6 +1223,7 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1180,12 +1235,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -1214,6 +1270,7 @@ CONFIG_FS_MBCACHE=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1254,6 +1311,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1330,7 +1388,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1383,15 +1440,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1400,6 +1465,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1411,12 +1477,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1489,6 +1557,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index 444ddf98436..41220ece603 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:11 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:29 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y @@ -23,7 +24,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -100,7 +101,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -124,10 +126,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -161,6 +160,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -168,10 +168,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -181,25 +181,23 @@ CONFIG_PPC_86xx=y CONFIG_MPC8641_HPCN=y # CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_FSL_ULI1575=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -219,9 +217,10 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set -# CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -235,15 +234,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -255,7 +254,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -268,7 +266,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -370,6 +368,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -390,12 +389,11 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -425,7 +423,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -528,8 +525,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -634,8 +629,6 @@ CONFIG_VITESSE_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -646,8 +639,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -670,18 +667,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -716,7 +717,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -781,14 +782,11 @@ CONFIG_SERIAL_8250_RSA=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y @@ -824,12 +822,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -894,6 +886,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -934,7 +937,6 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_CINERGYT2 is not set # CONFIG_DVB_SIANO_SMS1XXX is not set # @@ -951,6 +953,11 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # CONFIG_DVB_PLUTO2 is not set +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + # # Supported DVB Frontends # @@ -967,6 +974,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_CX24123 is not set # CONFIG_DVB_MT312 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set @@ -974,6 +983,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TUNER_ITD1000 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set # # DVB-T (terrestrial) frontends @@ -1026,6 +1037,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_LNBP21 is not set # CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1051,6 +1069,7 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1135,8 +1154,6 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set CONFIG_SND_PPC=y -# CONFIG_SND_POWERMAC is not set -# CONFIG_SND_AOA is not set CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set @@ -1153,9 +1170,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1174,6 +1218,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1197,6 +1243,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1204,6 +1252,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1225,7 +1274,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1246,6 +1294,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1263,7 +1312,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1309,12 +1360,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1323,6 +1377,7 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1334,12 +1389,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1377,6 +1433,7 @@ CONFIG_NTFS_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1421,6 +1478,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1496,7 +1554,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1550,15 +1607,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1567,6 +1632,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1578,15 +1644,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1659,6 +1729,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig index d900f8f376c..a4342862f6e 100644 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:15 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:40:26 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y @@ -23,7 +24,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -100,7 +101,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -123,10 +125,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -160,6 +159,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -167,10 +167,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -180,25 +180,23 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set CONFIG_SBC8641D=y # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -219,9 +217,10 @@ CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT=y # CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set -# CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -235,15 +234,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -255,7 +254,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -270,7 +268,7 @@ CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -341,7 +339,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -378,8 +375,8 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set @@ -388,37 +385,39 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m # CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -437,25 +436,21 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +# CONFIG_IP6_NF_MATCH_AH is not set +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -# CONFIG_IP6_NF_MATCH_AH is not set # CONFIG_IP6_NF_MATCH_MH is not set -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set - -# -# Bridge: Netfilter Configuration -# # CONFIG_BRIDGE_NF_EBTABLES is not set # CONFIG_IP_DCCP is not set CONFIG_IP_SCTP=m @@ -476,6 +471,7 @@ CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m # CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set @@ -497,6 +493,7 @@ CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m +# CONFIG_NET_SCH_MULTIQ is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -534,12 +531,11 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -649,7 +645,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -686,6 +681,7 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -742,8 +738,6 @@ CONFIG_BROADCOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -754,8 +748,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -778,6 +776,7 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -890,14 +889,11 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set @@ -934,12 +930,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -997,7 +987,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1052,7 +1041,6 @@ CONFIG_WATCHDOG=y CONFIG_SOFT_WATCHDOG=m # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -1073,6 +1061,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1116,6 +1115,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1132,6 +1137,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1141,6 +1147,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1154,9 +1161,11 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set @@ -1166,12 +1175,14 @@ CONFIG_REISERFS_FS_POSIX_ACL=y # CONFIG_REISERFS_FS_SECURITY is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_STATS=y CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1199,6 +1210,7 @@ CONFIG_AUTOFS4_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1237,6 +1249,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1257,7 +1270,6 @@ CONFIG_CIFS_POSIX=y # Partition Types # # CONFIG_PARTITION_ADVANCED is not set -CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" @@ -1305,7 +1317,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1358,16 +1369,24 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1376,6 +1395,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -1388,6 +1408,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set @@ -1397,10 +1418,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m @@ -1474,6 +1497,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index 63cd51fbb4b..024f279af90 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:00 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:32 2008 # # CONFIG_PPC64 is not set @@ -19,7 +19,7 @@ CONFIG_8xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -102,6 +102,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -115,10 +116,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set @@ -144,6 +142,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -156,6 +155,7 @@ CONFIG_CPM1=y # CONFIG_MPC885ADS is not set # CONFIG_PPC_EP88XC is not set CONFIG_PPC_ADDER875=y +# CONFIG_PPC_MGSUVD is not set # # MPC8xx CPM Options @@ -184,6 +184,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -191,7 +192,6 @@ CONFIG_CPM=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -205,6 +205,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_8XX_MINIMAL_FPEMU is not set @@ -220,15 +222,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -310,6 +312,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -330,11 +333,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -476,6 +478,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -534,6 +539,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -573,12 +579,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set @@ -613,6 +613,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -652,16 +660,18 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -690,6 +700,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -727,6 +738,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -762,7 +774,6 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -812,14 +823,22 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -828,6 +847,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set @@ -839,6 +859,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set CONFIG_PPC_CLOCK=y diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index c16521ffb47..5078594cd1f 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:02 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:34 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_NOT_COHERENT_CACHE=y CONFIG_CHECK_CACHE_COHERENCY=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -114,7 +114,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -130,10 +132,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -166,6 +164,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -227,7 +226,6 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=m # Kernel options # CONFIG_HIGHMEM=y -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -241,6 +239,8 @@ CONFIG_HZ=250 CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -255,15 +255,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -285,7 +285,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set CONFIG_HOTPLUG_PCI=y @@ -361,36 +361,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -CONFIG_IP_VS=m -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y # CONFIG_IPV6_ROUTER_PREF is not set @@ -427,8 +397,8 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_SECMARK is not set @@ -438,37 +408,70 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_IP_VS=m +# CONFIG_IP_VS_IPV6 is not set +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m # CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -487,25 +490,21 @@ CONFIG_IP_NF_ARP_MANGLE=m # # CONFIG_IP6_NF_QUEUE is not set CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +# CONFIG_IP6_NF_MATCH_AH is not set +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -# CONFIG_IP6_NF_MATCH_AH is not set # CONFIG_IP6_NF_MATCH_MH is not set -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set - -# -# Bridge: Netfilter Configuration -# CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -545,6 +544,7 @@ CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m # CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set @@ -566,6 +566,7 @@ CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m +# CONFIG_NET_SCH_MULTIQ is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -627,12 +628,11 @@ CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set @@ -910,8 +910,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -933,6 +937,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -998,6 +1003,7 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=m # @@ -1226,6 +1232,16 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1283,6 +1299,8 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1305,6 +1323,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # Enable Host or Gadget support to see Inventra options @@ -1316,6 +1336,7 @@ CONFIG_USB_UHCI_HCD=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1337,7 +1358,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1413,6 +1433,7 @@ CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EMI62=m # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m @@ -1430,12 +1451,14 @@ CONFIG_USB_LED=m # CONFIG_USB_IOWARRIOR is not set CONFIG_USB_TEST=m # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set CONFIG_USB_ATM=m CONFIG_USB_SPEEDTOUCH=m # CONFIG_USB_CXACRU is not set # CONFIG_USB_UEAGLEATM is not set # CONFIG_USB_XUSBATM is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1464,8 +1487,8 @@ CONFIG_DMADEVICES=y # # DMA Devices # -# CONFIG_FSL_DMA is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1475,12 +1498,13 @@ CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=m CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1519,6 +1543,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1570,12 +1595,14 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_XPRT_RDMA=m +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG2 is not set @@ -1651,7 +1678,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=m @@ -1707,17 +1733,25 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1726,6 +1760,7 @@ CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1738,6 +1773,7 @@ CONFIG_BOOTX_TEXT=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set @@ -1756,10 +1792,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m @@ -1833,6 +1871,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index cd691f77081..a6f1cff564e 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:03 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:36 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -48,13 +48,11 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y +# CONFIG_PPC_UDBG_16550 is not set # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -93,7 +91,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -103,7 +100,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -115,10 +114,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -144,6 +140,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -151,39 +148,36 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_PPC_82xx=y # CONFIG_MPC8272_ADS is not set # CONFIG_PQ2FADS is not set CONFIG_EP8248E=y +# CONFIG_MGCOGE is not set # CONFIG_PQ2ADS is not set CONFIG_8260=y CONFIG_8272=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -192,7 +186,6 @@ CONFIG_CPM=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -206,6 +199,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -215,15 +210,15 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -235,7 +230,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -247,7 +241,7 @@ CONFIG_PCI_8260=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -303,7 +297,6 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -330,10 +323,12 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -360,11 +355,10 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -469,7 +463,6 @@ CONFIG_OF_GPIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -534,8 +527,6 @@ CONFIG_MDIO_BITBANG=y # CONFIG_MDIO_OF_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -546,8 +537,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -570,18 +565,23 @@ CONFIG_NETDEV_1000=y # CONFIG_GIANFAR is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -629,21 +629,12 @@ CONFIG_DEVKMEM=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -CONFIG_SERIAL_CPM_SCC4=y -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -692,6 +683,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -732,6 +731,7 @@ CONFIG_DAB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -741,10 +741,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -774,6 +776,7 @@ CONFIG_AUTOFS4_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -874,7 +877,6 @@ CONFIG_NLS_UTF8=y # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -924,15 +926,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -940,6 +950,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y @@ -951,14 +962,19 @@ CONFIG_BDI_SWITCH=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1025,6 +1041,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index 480225be2f3..870d28976a4 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:04 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:37 2008 # # CONFIG_PPC64 is not set @@ -19,7 +19,7 @@ CONFIG_8xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -101,6 +101,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -114,10 +115,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set @@ -143,6 +141,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -155,6 +154,7 @@ CONFIG_CPM1=y # CONFIG_MPC885ADS is not set CONFIG_PPC_EP88XC=y # CONFIG_PPC_ADDER875 is not set +# CONFIG_PPC_MGSUVD is not set # # MPC8xx CPM Options @@ -183,6 +183,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -204,6 +205,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set CONFIG_8XX_MINIMAL_FPEMU=y @@ -219,15 +222,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -309,6 +312,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -329,11 +333,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -475,6 +478,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -529,12 +535,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set @@ -570,6 +570,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -608,16 +616,18 @@ CONFIG_DAB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -646,6 +656,7 @@ CONFIG_DAB=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -683,6 +694,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -718,7 +730,6 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -768,14 +779,22 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -784,6 +803,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -794,6 +814,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set CONFIG_PPC_CLOCK=y diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 851b27e45cf..54fa6248137 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Fri Oct 24 00:42:39 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:38 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -124,10 +126,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -160,6 +158,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -199,6 +198,7 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set # @@ -219,6 +219,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -233,15 +235,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -263,7 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -324,7 +326,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -354,13 +355,14 @@ CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m # CONFIG_NF_CT_NETLINK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set @@ -374,19 +376,21 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set CONFIG_NETFILTER_XT_MATCH_MAC=m # CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set CONFIG_NETFILTER_XT_MATCH_STATE=m # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set @@ -394,20 +398,20 @@ CONFIG_NETFILTER_XT_MATCH_STATE=m # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -# CONFIG_IP_NF_MATCH_ECN is not set +CONFIG_IP_NF_MATCH_ADDRTYPE=m # CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_TTL is not set -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m # CONFIG_IP_NF_TARGET_LOG is not set @@ -415,8 +419,8 @@ CONFIG_IP_NF_TARGET_REJECT=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m # CONFIG_IP_NF_TARGET_NETMAP is not set +CONFIG_IP_NF_TARGET_REDIRECT=m # CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_SCTP=m @@ -428,9 +432,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -440,6 +444,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -460,11 +465,10 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set @@ -772,7 +776,7 @@ CONFIG_TUN=m # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -792,8 +796,12 @@ CONFIG_TULIP_MMIO=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -816,18 +824,22 @@ CONFIG_R8169=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -892,6 +904,7 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=m # @@ -1091,6 +1104,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1138,12 +1162,18 @@ CONFIG_HID=m # USB Input Devices # # CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1160,6 +1190,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1183,6 +1215,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1190,6 +1224,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1274,6 +1309,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1291,7 +1327,9 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1337,12 +1375,15 @@ CONFIG_RTC_DRV_RS5C372=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1351,6 +1392,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1362,12 +1404,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -1409,6 +1452,7 @@ CONFIG_NTFS_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1452,6 +1496,7 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1516,7 +1561,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1572,15 +1616,23 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1589,6 +1641,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -1600,15 +1653,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1682,6 +1739,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index cc9eaba8c9c..8d3c6232400 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Thu May 22 08:18:47 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:38 2008 # # CONFIG_PPC64 is not set @@ -15,13 +15,14 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y -# CONFIG_PPC_UDBG_16550 is not set +CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set +CONFIG_HIBERNATE_32=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -82,7 +87,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -90,6 +94,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -99,17 +104,22 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -119,6 +129,7 @@ CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -133,18 +144,21 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support # -# CONFIG_PPC_MULTIPLATFORM is not set -CONFIG_PPC_82xx=y -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set +CONFIG_PPC_82xx=y # CONFIG_MPC8272_ADS is not set # CONFIG_PQ2FADS is not set # CONFIG_EP8248E is not set @@ -152,19 +166,28 @@ CONFIG_MGCOGE=y # CONFIG_PQ2ADS is not set CONFIG_8260=y CONFIG_8272=y +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set -# CONFIG_MPIC is not set +CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y # CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set +CONFIG_PPC_MPC106=y # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_PPC601_SYNC_FIX is not set +# CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -172,7 +195,6 @@ CONFIG_CPM=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -186,6 +208,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -195,17 +219,19 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -213,13 +239,22 @@ CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_ISA is not set CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCI_8260=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set # @@ -235,10 +270,6 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -276,7 +307,6 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -290,10 +320,12 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -314,11 +346,10 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -398,11 +429,13 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_PMC551 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -422,19 +455,26 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_MAC_FLOPPY is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -448,14 +488,25 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# A new alternative FireWire stack is available with EXPERIMENTAL=y +# +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set +# CONFIG_ARCNET is not set CONFIG_PHYLIB=y # @@ -475,17 +526,31 @@ CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_MACE is not set +# CONFIG_BMAC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y # CONFIG_FS_ENET_HAS_FCC is not set # CONFIG_FS_ENET_MDIO_FCC is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set # # Wireless LAN @@ -494,6 +559,7 @@ CONFIG_FS_ENET_HAS_SCC=y # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set +# CONFIG_FDDI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NETPOLL is not set @@ -530,29 +596,47 @@ CONFIG_DEVKMEM=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set +CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -564,8 +648,18 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -586,6 +680,8 @@ CONFIG_SSB_POSSIBLE=y # # Graphics support # +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set @@ -595,19 +691,17 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -617,11 +711,13 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -651,6 +747,7 @@ CONFIG_AUTOFS4_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -673,6 +770,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -682,8 +780,8 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -759,9 +857,9 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -804,20 +902,41 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUGGER is not set -# CONFIG_KGDB_CONSOLE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set CONFIG_BDI_SWITCH=y +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -825,13 +944,19 @@ CONFIG_BDI_SWITCH=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -865,6 +990,10 @@ CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -894,7 +1023,12 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set -# CONFIG_PPC_CLOCK is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig index 3cd6ce4be82..fbaa67f7b0e 100644 --- a/arch/powerpc/configs/mgsuvd_defconfig +++ b/arch/powerpc/configs/mgsuvd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Wed May 21 13:30:33 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:39 2008 # # CONFIG_PPC64 is not set @@ -19,7 +19,7 @@ CONFIG_8xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -99,6 +100,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLAB=y # CONFIG_SLUB is not set @@ -106,10 +108,13 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -120,6 +125,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -134,12 +140,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_CPM1=y @@ -158,6 +163,7 @@ CONFIG_PPC_MGSUVD=y # Generic MPC8xx Options # CONFIG_8xx_COPYBACK=y +# CONFIG_8xx_GPIO is not set CONFIG_8xx_CPU6=y CONFIG_8xx_CPU15=y # CONFIG_NO_UCODE_PATCH is not set @@ -177,7 +183,7 @@ CONFIG_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -CONFIG_PPC_CPM_NEW_BINDING=y +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -185,7 +191,6 @@ CONFIG_CPM=y # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -199,6 +204,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -213,17 +220,19 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -255,10 +264,6 @@ CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 - -# -# Networking -# CONFIG_NET=y # @@ -309,6 +314,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -329,11 +335,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -447,6 +452,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -462,7 +468,6 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -492,6 +497,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y @@ -546,12 +554,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -# CONFIG_SERIAL_CPM_SMC2 is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set @@ -564,10 +566,13 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -579,8 +584,18 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -610,10 +625,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -624,6 +635,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -637,13 +649,14 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -673,6 +686,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -703,6 +717,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -713,13 +728,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -756,9 +771,9 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set @@ -783,7 +798,17 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -793,12 +818,14 @@ CONFIG_DEBUG_FS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -836,6 +863,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -866,7 +897,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y -# CONFIG_PPC_CLOCK is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set +CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index ab5199f26a2..f80b1ca43af 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:06 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:40 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -104,7 +104,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -117,10 +119,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -147,6 +145,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -204,6 +203,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -218,15 +219,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -247,7 +248,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -315,6 +316,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -335,11 +337,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -576,6 +577,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -600,6 +604,7 @@ CONFIG_8139TOO=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -622,18 +627,22 @@ CONFIG_TSI108_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -766,6 +775,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -801,6 +818,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -817,6 +840,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -826,6 +850,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -837,12 +862,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -872,6 +898,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -906,6 +933,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -942,7 +970,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -972,13 +999,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -990,12 +1019,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1067,6 +1098,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index ff6f7c475f4..c8f5dec1b69 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:07 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:41 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -48,13 +48,11 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y +# CONFIG_PPC_UDBG_16550 is not set # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -93,7 +91,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -103,7 +100,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -116,10 +115,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -145,6 +141,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -152,16 +149,17 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_PPC_82xx=y CONFIG_MPC8272_ADS=y # CONFIG_PQ2FADS is not set # CONFIG_EP8248E is not set +# CONFIG_MGCOGE is not set CONFIG_PQ2ADS=y CONFIG_8260=y CONFIG_8272=y @@ -169,23 +167,19 @@ CONFIG_PQ2_ADS_PCI_PIC=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -208,6 +202,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -217,15 +213,15 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -237,7 +233,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -249,7 +244,7 @@ CONFIG_PCI_8260=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -305,7 +300,6 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -332,10 +326,12 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -362,11 +358,10 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -472,7 +467,6 @@ CONFIG_OF_GPIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -537,8 +531,6 @@ CONFIG_MDIO_BITBANG=y # CONFIG_MDIO_OF_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -549,8 +541,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -573,18 +569,23 @@ CONFIG_NETDEV_1000=y # CONFIG_GIANFAR is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -645,6 +646,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -684,21 +686,12 @@ CONFIG_DEVKMEM=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -CONFIG_SERIAL_CPM_SCC4=y -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -747,6 +740,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -788,6 +789,7 @@ CONFIG_DAB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -799,11 +801,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -833,6 +837,7 @@ CONFIG_AUTOFS4_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -935,7 +940,6 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -989,15 +993,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1005,6 +1017,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y @@ -1016,14 +1029,19 @@ CONFIG_BDI_SWITCH=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1090,6 +1108,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 991c9bda12a..15eb30c9b3f 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 07:16:25 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:42 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -55,8 +55,6 @@ CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y CONFIG_REDBOOT=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set @@ -101,7 +99,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -111,7 +108,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -124,10 +123,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -160,6 +155,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -167,10 +163,10 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_82xx is not set @@ -193,31 +189,27 @@ CONFIG_PPC_MPC834x=y CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_IPIC=y -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set CONFIG_QUICC_ENGINE=y +CONFIG_QE_GPIO=y # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -231,6 +223,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -246,15 +240,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -266,7 +260,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y CONFIG_PPC_INDIRECT_PCI=y @@ -281,7 +274,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -349,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -369,11 +363,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -488,7 +481,6 @@ CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -590,8 +582,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_MESH is not set -# CONFIG_SCSI_MAC53C94 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -696,8 +686,6 @@ CONFIG_ICPLUS_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -708,8 +696,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -736,18 +728,22 @@ CONFIG_UCC_GETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -782,7 +778,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -833,15 +829,12 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -879,12 +872,6 @@ CONFIG_I2C_HELPER_AUTO=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set -# -# Mac SMBus host controller drivers -# -# CONFIG_I2C_HYDRA is not set -CONFIG_I2C_POWERMAC=y - # # I2C system bus drivers (mostly embedded / system-on-chip) # @@ -924,6 +911,7 @@ CONFIG_I2C_MPC=y # CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set +# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -963,7 +951,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_AMS is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1018,7 +1005,6 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set -# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -1044,6 +1030,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1086,9 +1083,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1107,6 +1131,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1123,6 +1149,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1130,6 +1158,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1158,6 +1187,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1174,7 +1204,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1184,6 +1216,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1195,12 +1228,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1230,6 +1264,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1268,6 +1303,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1301,13 +1337,11 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y -CONFIG_QE_GPIO=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1335,13 +1369,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1353,16 +1389,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1435,6 +1474,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index f0a13bebf50..c87b53abc61 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 07:15:20 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:43 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_SPE=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -111,7 +111,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -125,10 +127,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -161,6 +160,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -197,9 +197,11 @@ CONFIG_PPC_I8259=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_QUICC_ENGINE=y +# CONFIG_QE_GPIO is not set CONFIG_CPM2=y CONFIG_FSL_ULI1575=y CONFIG_CPM=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -219,6 +221,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -233,15 +237,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -265,7 +269,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -367,6 +371,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -387,12 +392,11 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -639,8 +643,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -664,18 +672,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -710,7 +722,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -902,7 +914,19 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -943,7 +967,6 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_CINERGYT2 is not set # CONFIG_DVB_SIANO_SMS1XXX is not set # @@ -960,6 +983,11 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # CONFIG_DVB_PLUTO2 is not set +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + # # Supported DVB Frontends # @@ -976,6 +1004,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_CX24123 is not set # CONFIG_DVB_MT312 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set @@ -983,6 +1013,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TUNER_ITD1000 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set # # DVB-T (terrestrial) frontends @@ -1035,6 +1067,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_LNBP21 is not set # CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1060,6 +1099,7 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1160,9 +1200,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1181,6 +1248,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1204,6 +1273,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # CONFIG_USB_MUSB_HDRC is not set # @@ -1212,6 +1283,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1233,7 +1305,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1254,6 +1325,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1271,7 +1343,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1324,12 +1398,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1350,6 +1427,7 @@ CONFIG_DMA_ENGINE=y # CONFIG_NET_DMA is not set # CONFIG_DMATEST is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1361,13 +1439,14 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1405,6 +1484,7 @@ CONFIG_NTFS_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1449,6 +1529,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1519,13 +1600,11 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -# CONFIG_QE_GPIO is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1579,15 +1658,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1596,6 +1683,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set CONFIG_VIRQ_DEBUG=y @@ -1607,15 +1695,19 @@ CONFIG_VIRQ_DEBUG=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1688,6 +1780,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 1501c4336b3..8272b1ac71f 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:11 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:43 2008 # # CONFIG_PPC64 is not set @@ -19,7 +19,7 @@ CONFIG_8xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -99,6 +99,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -112,10 +113,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -142,6 +140,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -154,6 +153,7 @@ CONFIG_MPC86XADS=y # CONFIG_MPC885ADS is not set # CONFIG_PPC_EP88XC is not set # CONFIG_PPC_ADDER875 is not set +# CONFIG_PPC_MGSUVD is not set # # MPC8xx CPM Options @@ -182,6 +182,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -203,6 +204,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -217,15 +220,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -311,6 +314,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -331,11 +335,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -412,6 +415,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y @@ -471,6 +477,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -510,12 +517,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set @@ -563,6 +564,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -596,6 +605,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -619,6 +634,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -632,12 +648,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -667,6 +684,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -703,6 +721,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -739,7 +758,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -769,12 +787,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -785,12 +805,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -862,6 +884,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_TALITOS is not set CONFIG_PPC_CLOCK=y diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index 9d4be820cf1..1736bbc281e 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc5 -# Tue Sep 23 23:28:38 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:44 2008 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_6xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_FPU=y +# CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y @@ -23,7 +24,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -109,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -123,10 +126,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -160,7 +160,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y -# CONFIG_MPC8xxx_GPIO is not set +# CONFIG_FREEZER is not set # # Platform support @@ -196,7 +196,9 @@ CONFIG_PPC_I8259=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_FSL_ULI1575=y +# CONFIG_MPC8xxx_GPIO is not set # # Kernel options @@ -216,6 +218,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -231,15 +235,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -263,7 +267,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -365,6 +369,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -385,12 +390,11 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -636,8 +640,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -660,18 +668,22 @@ CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -706,7 +718,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -875,6 +887,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -915,7 +938,6 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_CINERGYT2 is not set # CONFIG_DVB_SIANO_SMS1XXX is not set # @@ -932,6 +954,11 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # CONFIG_DVB_PLUTO2 is not set +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + # # Supported DVB Frontends # @@ -948,6 +975,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_CX24123 is not set # CONFIG_DVB_MT312 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set @@ -955,6 +984,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_TUNER_ITD1000 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set # # DVB-T (terrestrial) frontends @@ -1007,6 +1038,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_LNBP21 is not set # CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1032,6 +1070,7 @@ CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1132,9 +1171,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1153,6 +1219,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1176,6 +1244,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1183,6 +1253,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1204,7 +1275,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1225,6 +1295,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1242,7 +1313,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1288,12 +1361,15 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1302,6 +1378,7 @@ CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1313,12 +1390,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1356,6 +1434,7 @@ CONFIG_NTFS_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1400,6 +1479,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1475,7 +1555,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1529,15 +1608,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1558,15 +1645,19 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1639,6 +1730,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index fc3f6dc5812..a4283b6a43d 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:12 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:46 2008 # # CONFIG_PPC64 is not set @@ -19,7 +19,7 @@ CONFIG_8xx=y CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -101,6 +101,7 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set @@ -114,10 +115,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set @@ -143,6 +141,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -155,6 +154,7 @@ CONFIG_CPM1=y CONFIG_MPC885ADS=y # CONFIG_PPC_EP88XC is not set # CONFIG_PPC_ADDER875 is not set +# CONFIG_PPC_MGSUVD is not set # # Freescale Ethernet driver platform-specific options @@ -190,6 +190,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -211,6 +212,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set CONFIG_8XX_MINIMAL_FPEMU=y @@ -226,15 +229,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -316,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -336,11 +340,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -486,6 +489,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set @@ -540,12 +546,6 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set @@ -581,6 +581,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -619,16 +627,18 @@ CONFIG_DAB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -657,6 +667,7 @@ CONFIG_DAB=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -694,6 +705,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -729,7 +741,6 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -779,14 +790,22 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -795,6 +814,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set @@ -805,6 +825,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set CONFIG_PPC_CLOCK=y diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index 7e17862c38b..228099d77c3 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:13 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:47 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -48,13 +48,11 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y +# CONFIG_PPC_UDBG_16550 is not set # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y -CONFIG_HIBERNATE_32=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -94,7 +92,6 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -104,7 +101,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -117,10 +116,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -146,6 +142,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -153,39 +150,36 @@ CONFIG_CLASSIC_RCU=y CONFIG_PPC_MULTIPLATFORM=y CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set -# CONFIG_PPC_PMAC is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set CONFIG_PPC_82xx=y # CONFIG_MPC8272_ADS is not set CONFIG_PQ2FADS=y # CONFIG_EP8248E is not set +# CONFIG_MGCOGE is not set CONFIG_PQ2ADS=y CONFIG_8260=y CONFIG_PQ2_ADS_PCI_PIC=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set -CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set -CONFIG_MPIC=y +# CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -CONFIG_PPC_RTAS=y -# CONFIG_RTAS_ERROR_LOGGING is not set -CONFIG_RTAS_PROC=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_PPC_MPC106=y +# CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_PPC601_SYNC_FIX is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y @@ -208,6 +202,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -217,15 +213,15 @@ CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -237,7 +233,6 @@ CONFIG_ISA_DMA_API=y # # Bus options # -# CONFIG_ISA is not set CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -250,7 +245,7 @@ CONFIG_PCI_8260=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -306,7 +301,6 @@ CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set @@ -333,10 +327,12 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -363,11 +359,10 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -473,7 +468,6 @@ CONFIG_OF_GPIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set -# CONFIG_MAC_FLOPPY is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -494,17 +488,16 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -539,7 +532,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_BLK_DEV_IDE_PMAC is not set # CONFIG_BLK_DEV_IDEDMA is not set # @@ -590,8 +582,6 @@ CONFIG_MDIO_BITBANG=y # CONFIG_MDIO_OF_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_MACE is not set -# CONFIG_BMAC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -602,8 +592,12 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -626,18 +620,23 @@ CONFIG_NETDEV_1000=y # CONFIG_GIANFAR is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -698,6 +697,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -739,21 +739,12 @@ CONFIG_DEVKMEM=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_PMACZILOG is not set CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -CONFIG_SERIAL_CPM_SCC4=y -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_BRIQ_PANEL is not set -# CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -802,6 +793,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -850,20 +849,22 @@ CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y -# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set @@ -883,6 +884,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -894,11 +896,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -928,6 +932,7 @@ CONFIG_AUTOFS4_FS=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1030,7 +1035,6 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1084,15 +1088,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACKOVERFLOW is not set @@ -1100,6 +1112,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y @@ -1111,14 +1124,19 @@ CONFIG_BDI_SWITCH=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1185,6 +1203,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_CRYPTO_DEV_TALITOS is not set diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index 01b54eac1ff..6046dc0cbd8 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:14 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:48 2008 # # CONFIG_PPC64 is not set @@ -24,7 +24,7 @@ CONFIG_NOT_COHERENT_CACHE=y CONFIG_CHECK_CACHE_COHERENCY=y CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -123,10 +125,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -153,6 +151,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -210,6 +209,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -224,15 +225,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -253,7 +254,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -323,6 +324,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -343,11 +345,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -478,17 +479,16 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -721,6 +721,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -745,11 +748,11 @@ CONFIG_8139TOO=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -767,18 +770,22 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -813,7 +820,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=y # CONFIG_INPUT_POLLDEV is not set # @@ -1025,6 +1032,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1073,9 +1091,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_ZEROPLUS_FF=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1092,6 +1137,8 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1111,6 +1158,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1118,6 +1167,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1146,6 +1196,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1163,7 +1214,9 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1209,12 +1262,15 @@ CONFIG_RTC_DRV_MAX6900=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1223,6 +1279,7 @@ CONFIG_RTC_DRV_MAX6900=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1234,12 +1291,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1269,6 +1327,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1304,6 +1363,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1340,7 +1400,6 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1370,13 +1429,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1388,12 +1449,14 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1465,6 +1528,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index 4340cc1c5b6..b3f5671972a 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Thu Aug 21 00:52:16 2008 +# Linux kernel version: 2.6.28-rc3 +# Sat Nov 8 12:39:48 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -102,7 +102,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -115,10 +117,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +149,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -190,13 +189,13 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -210,6 +209,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -224,15 +225,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -255,7 +256,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -318,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -338,11 +340,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -471,18 +472,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -605,6 +605,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -636,6 +637,7 @@ CONFIG_DUMMY=m # CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set +CONFIG_MII=y CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -658,6 +660,7 @@ CONFIG_R8169=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -827,6 +830,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -877,6 +891,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -897,6 +913,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -904,6 +922,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -924,7 +943,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -945,6 +963,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -962,7 +981,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1008,12 +1029,15 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1022,6 +1046,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1033,12 +1058,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_POSIX_ACL is not set @@ -1072,6 +1098,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1177,7 +1204,6 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1209,13 +1235,15 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_IRQSTACKS is not set @@ -1227,6 +1255,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y -- cgit v1.2.3-70-g09d2 From 493890e75d98810a3470b4aae23be628ee5e9667 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sun, 26 Oct 2008 12:37:25 +0100 Subject: mmc: increase SD write timeout for crappy cards It seems that some cards are slightly out of spec and occasionally will not be able to complete a write in the alloted 250 ms [1]. Incease the timeout slightly to allow even these cards to function properly. [1] http://lkml.org/lkml/2008/9/23/390 Signed-off-by: Pierre Ossman --- drivers/mmc/core/core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 044d84eeed7..f7284b905eb 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -280,7 +280,11 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) (card->host->ios.clock / 1000); if (data->flags & MMC_DATA_WRITE) - limit_us = 250000; + /* + * The limit is really 250 ms, but that is + * insufficient for some crappy cards. + */ + limit_us = 300000; else limit_us = 100000; -- cgit v1.2.3-70-g09d2 From d1b268630875a7713b5d468a0c03403c5b721c8e Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Sat, 8 Nov 2008 21:37:46 +0100 Subject: mmc: struct device - replace bus_id with dev_name(), dev_set_name() Acked-by: Greg Kroah-Hartman Signed-Off-By: Kay Sievers Signed-off-by: Pierre Ossman --- drivers/mmc/core/bus.c | 3 +-- drivers/mmc/core/host.c | 5 ++--- drivers/mmc/core/sdio_bus.c | 3 +-- drivers/mmc/host/mmc_spi.c | 2 +- drivers/mmc/host/sdhci.c | 2 +- drivers/mmc/host/tifm_sd.c | 16 ++++++++-------- include/linux/mmc/card.h | 2 +- include/linux/mmc/host.h | 2 +- include/linux/mmc/sdio_func.h | 2 +- 9 files changed, 17 insertions(+), 20 deletions(-) diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 0d9b2d6f9eb..f210a8ee686 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -216,8 +216,7 @@ int mmc_add_card(struct mmc_card *card) int ret; const char *type; - snprintf(card->dev.bus_id, sizeof(card->dev.bus_id), - "%s:%04x", mmc_hostname(card->host), card->rca); + dev_set_name(&card->dev, "%s:%04x", mmc_hostname(card->host), card->rca); switch (card->type) { case MMC_TYPE_MMC: diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 6da80fd4d97..5e945e64ead 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -73,8 +73,7 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) if (err) goto free; - snprintf(host->class_dev.bus_id, BUS_ID_SIZE, - "mmc%d", host->index); + dev_set_name(&host->class_dev, "mmc%d", host->index); host->parent = dev; host->class_dev.parent = dev; @@ -121,7 +120,7 @@ int mmc_add_host(struct mmc_host *host) WARN_ON((host->caps & MMC_CAP_SDIO_IRQ) && !host->ops->enable_sdio_irq); - led_trigger_register_simple(host->class_dev.bus_id, &host->led); + led_trigger_register_simple(dev_name(&host->class_dev), &host->led); err = device_add(&host->class_dev); if (err) diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 233d0f9b3c4..46284b52739 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -239,8 +239,7 @@ int sdio_add_func(struct sdio_func *func) { int ret; - snprintf(func->dev.bus_id, sizeof(func->dev.bus_id), - "%s:%d", mmc_card_id(func->card), func->num); + dev_set_name(&func->dev, "%s:%d", mmc_card_id(func->card), func->num); ret = device_add(&func->dev); if (ret == 0) diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 07faf5412a1..ad00e163231 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1348,7 +1348,7 @@ static int mmc_spi_probe(struct spi_device *spi) goto fail_add_host; dev_info(&spi->dev, "SD/MMC host %s%s%s%s%s\n", - mmc->class_dev.bus_id, + dev_name(&mmc->class_dev), host->dma_dev ? "" : ", no DMA", (host->pdata && host->pdata->get_ro) ? "" : ", no WP", diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 30f64b1f235..4d010a984be 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1733,7 +1733,7 @@ int sdhci_add_host(struct sdhci_host *host) mmc_add_host(mmc); printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s%s\n", - mmc_hostname(mmc), host->hw_name, mmc_dev(mmc)->bus_id, + mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)), (host->flags & SDHCI_USE_ADMA)?"A":"", (host->flags & SDHCI_USE_DMA)?"DMA":"PIO"); diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c index 13844843e8d..82554ddec6b 100644 --- a/drivers/mmc/host/tifm_sd.c +++ b/drivers/mmc/host/tifm_sd.c @@ -632,7 +632,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq) if (host->req) { printk(KERN_ERR "%s : unfinished request detected\n", - sock->dev.bus_id); + dev_name(&sock->dev)); mrq->cmd->error = -ETIMEDOUT; goto err_out; } @@ -672,7 +672,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq) ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE)) { printk(KERN_ERR "%s : scatterlist map failed\n", - sock->dev.bus_id); + dev_name(&sock->dev)); mrq->cmd->error = -ENOMEM; goto err_out; } @@ -684,7 +684,7 @@ static void tifm_sd_request(struct mmc_host *mmc, struct mmc_request *mrq) : PCI_DMA_FROMDEVICE); if (host->sg_len < 1) { printk(KERN_ERR "%s : scatterlist map failed\n", - sock->dev.bus_id); + dev_name(&sock->dev)); tifm_unmap_sg(sock, &host->bounce_buf, 1, r_data->flags & MMC_DATA_WRITE ? PCI_DMA_TODEVICE @@ -748,7 +748,7 @@ static void tifm_sd_end_cmd(unsigned long data) if (!mrq) { printk(KERN_ERR " %s : no request to complete?\n", - sock->dev.bus_id); + dev_name(&sock->dev)); spin_unlock_irqrestore(&sock->lock, flags); return; } @@ -789,7 +789,7 @@ static void tifm_sd_abort(unsigned long data) printk(KERN_ERR "%s : card failed to respond for a long period of time " "(%x, %x)\n", - host->dev->dev.bus_id, host->req->cmd->opcode, host->cmd_flags); + dev_name(&host->dev->dev), host->req->cmd->opcode, host->cmd_flags); tifm_eject(host->dev); } @@ -906,7 +906,7 @@ static int tifm_sd_initialize_host(struct tifm_sd *host) if (rc) { printk(KERN_ERR "%s : controller failed to reset\n", - sock->dev.bus_id); + dev_name(&sock->dev)); return -ENODEV; } @@ -933,7 +933,7 @@ static int tifm_sd_initialize_host(struct tifm_sd *host) if (rc) { printk(KERN_ERR "%s : card not ready - probe failed on initialization\n", - sock->dev.bus_id); + dev_name(&sock->dev)); return -ENODEV; } @@ -954,7 +954,7 @@ static int tifm_sd_probe(struct tifm_dev *sock) if (!(TIFM_SOCK_STATE_OCCUPIED & readl(sock->addr + SOCK_PRESENT_STATE))) { printk(KERN_WARNING "%s : card gone, unexpectedly\n", - sock->dev.bus_id); + dev_name(&sock->dev)); return rc; } diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index ee6e822d599..403aa505f27 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -130,7 +130,7 @@ struct mmc_card { #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) #define mmc_card_name(c) ((c)->cid.prod_name) -#define mmc_card_id(c) ((c)->dev.bus_id) +#define mmc_card_id(c) (dev_name(&(c)->dev)) #define mmc_list_to_card(l) container_of(l, struct mmc_card, node) #define mmc_get_drvdata(c) dev_get_drvdata(&(c)->dev) diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index bde891f6459..f842f234e44 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -176,7 +176,7 @@ static inline void *mmc_priv(struct mmc_host *host) #define mmc_dev(x) ((x)->parent) #define mmc_classdev(x) (&(x)->class_dev) -#define mmc_hostname(x) ((x)->class_dev.bus_id) +#define mmc_hostname(x) (dev_name(&(x)->class_dev)) extern int mmc_suspend_host(struct mmc_host *, pm_message_t); extern int mmc_resume_host(struct mmc_host *); diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h index 07bee4a0d45..451bdfc8583 100644 --- a/include/linux/mmc/sdio_func.h +++ b/include/linux/mmc/sdio_func.h @@ -63,7 +63,7 @@ struct sdio_func { #define sdio_func_set_present(f) ((f)->state |= SDIO_STATE_PRESENT) -#define sdio_func_id(f) ((f)->dev.bus_id) +#define sdio_func_id(f) (dev_name(&(f)->dev)) #define sdio_get_drvdata(f) dev_get_drvdata(&(f)->dev) #define sdio_set_drvdata(f,d) dev_set_drvdata(&(f)->dev, d) -- cgit v1.2.3-70-g09d2 From 72bc2b1ad62f4d2f0a51b35829093d41f55accce Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 8 Nov 2008 21:15:53 +0100 Subject: [ARM] 5329/1: Feroceon: fix feroceon_l2_inv_range Same fix as commit c7cf72dcadb: when 'start' and 'end' are less than a cacheline apart and 'start' is unaligned we are done after cleaning and invalidating the first cacheline. Cc: Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mm/cache-feroceon-l2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index 13cdae8b0d4..80cd207cbae 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -150,7 +150,7 @@ static void feroceon_l2_inv_range(unsigned long start, unsigned long end) /* * Clean and invalidate partial last cache line. */ - if (end & (CACHE_LINE_SIZE - 1)) { + if (start < end && end & (CACHE_LINE_SIZE - 1)) { l2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1)); end &= ~(CACHE_LINE_SIZE - 1); } @@ -158,7 +158,7 @@ static void feroceon_l2_inv_range(unsigned long start, unsigned long end) /* * Invalidate all full cache lines between 'start' and 'end'. */ - while (start != end) { + while (start < end) { unsigned long range_end = calc_range_end(start, end); l2_inv_pa_range(start, range_end - CACHE_LINE_SIZE); start = range_end; -- cgit v1.2.3-70-g09d2 From 0fded351a7d03fc69484d5a9e655fbd15a8e7dab Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 8 Nov 2008 19:14:56 +0000 Subject: [ARM] realview: correct MMC clock rate The MMC clock source is actually 24MHz, not 33MHz. Signed-off-by: Russell King --- arch/arm/mach-realview/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c index 3e706c57833..3347c4236a6 100644 --- a/arch/arm/mach-realview/clock.c +++ b/arch/arm/mach-realview/clock.c @@ -104,7 +104,7 @@ static struct clk uart_clk = { static struct clk mmci_clk = { .name = "MCLK", - .rate = 33000000, + .rate = 24000000, }; int clk_register(struct clk *clk) -- cgit v1.2.3-70-g09d2 From 7bfc0b2e266dd4cd3d3f27a3ad31bf79974190b1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 8 Nov 2008 20:12:36 +0000 Subject: [ARM] versatile: correct MMC clock rate The MMC clock source is actually 24MHz, not 33MHz. Signed-off-by: Russell King --- arch/arm/mach-versatile/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c index 9336508ec0b..58937f1fb38 100644 --- a/arch/arm/mach-versatile/clock.c +++ b/arch/arm/mach-versatile/clock.c @@ -105,7 +105,7 @@ static struct clk uart_clk = { static struct clk mmci_clk = { .name = "MCLK", - .rate = 33000000, + .rate = 24000000, }; int clk_register(struct clk *clk) -- cgit v1.2.3-70-g09d2 From ebb4c65869db7213280ad9c510637683939b5ff8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 9 Nov 2008 11:18:36 +0000 Subject: [ARM] iop: iop3xx needs registers mapped uncached+unbuffered Mikael Pettersson reported: The 2.6.28-rc kernels fail to detect PCI device 0000:00:01.0 (the first ethernet port) on my Thecus n2100 XScale box. There is however still a strange "ghost" device that gets partially detected in 2.6.28-rc2 vanilla. The IOP321 manual says: The user designates the memory region containing the OCCDR as non-cacheable and non-bufferable from the IntelR XScaleTM core. This guarantees that all load/stores to the OCCDR are only of DWORD quantities. Ensure that the OCCDR is so mapped. Signed-off-by: Russell King --- arch/arm/include/asm/mach/map.h | 13 +++++++------ arch/arm/mm/mmu.c | 6 ++++++ arch/arm/plat-iop/setup.c | 5 +++-- 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index cb1139ac194..39d949b63e8 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -19,12 +19,13 @@ struct map_desc { }; /* types 0-3 are defined in asm/io.h */ -#define MT_CACHECLEAN 4 -#define MT_MINICLEAN 5 -#define MT_LOW_VECTORS 6 -#define MT_HIGH_VECTORS 7 -#define MT_MEMORY 8 -#define MT_ROM 9 +#define MT_UNCACHED 4 +#define MT_CACHECLEAN 5 +#define MT_MINICLEAN 6 +#define MT_LOW_VECTORS 7 +#define MT_HIGH_VECTORS 8 +#define MT_MEMORY 9 +#define MT_ROM 10 #ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e63db11f16a..7f36c825718 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -208,6 +208,12 @@ static struct mem_type mem_types[] = { .prot_sect = PROT_SECT_DEVICE, .domain = DOMAIN_IO, }, + [MT_UNCACHED] = { + .prot_pte = PROT_PTE_DEVICE, + .prot_l1 = PMD_TYPE_TABLE, + .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN, + .domain = DOMAIN_IO, + }, [MT_CACHECLEAN] = { .prot_sect = PMD_TYPE_SECT | PMD_SECT_XN, .domain = DOMAIN_KERNEL, diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c index 4689db638e9..9e573e78176 100644 --- a/arch/arm/plat-iop/setup.c +++ b/arch/arm/plat-iop/setup.c @@ -16,14 +16,15 @@ #include /* - * Standard IO mapping for all IOP3xx based systems + * Standard IO mapping for all IOP3xx based systems. Note that + * the IOP3xx OCCDR must be mapped uncached and unbuffered. */ static struct map_desc iop3xx_std_desc[] __initdata = { { /* mem mapped registers */ .virtual = IOP3XX_PERIPHERAL_VIRT_BASE, .pfn = __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE), .length = IOP3XX_PERIPHERAL_SIZE, - .type = MT_DEVICE, + .type = MT_UNCACHED, }, { /* PCI IO space */ .virtual = IOP3XX_PCI_LOWER_IO_VA, .pfn = __phys_to_pfn(IOP3XX_PCI_LOWER_IO_PA), -- cgit v1.2.3-70-g09d2 From 65b92e5cbc8acd14ea83190b4d016f765dce6075 Mon Sep 17 00:00:00 2001 From: Michel Marti Date: Sat, 8 Nov 2008 11:33:32 +0100 Subject: ALSA: hda - Add another HP model (6730s) for AD1884A Added model=laptop for another HP machine (103c:3614) with AD1884A codec. Signed-off-by: Michel Marti Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index d3fd432cb3e..400df85a445 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3861,6 +3861,7 @@ static const char *ad1884a_models[AD1884A_MODELS] = { static struct snd_pci_quirk ad1884a_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x3030, "HP", AD1884A_MOBILE), SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE), + SND_PCI_QUIRK(0x103c, 0x3614, "HP 6730s", AD1884A_LAPTOP), SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD), {} }; -- cgit v1.2.3-70-g09d2 From 00c9ddd1d4cc73aa0077f379279d716cb0ab0ba5 Mon Sep 17 00:00:00 2001 From: Tim Blechmann Date: Sun, 9 Nov 2008 12:50:52 +0100 Subject: ALSA: HDSP: check for io box before uploading firmware currently the hdsp driver tries to upload the firmware, even if the io box is not connected. this patch adds a check for the io box before trying to upload the firmware. thus instead of messages complaining about the fifo status and firmware loading failure, the driver gives a message that no multiface or digiface is connected. [A minor coding-style fix by tiwai] Signed-off-by: Tim Blechmann Signed-off-by: Takashi Iwai --- sound/pci/rme9652/hdsp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index d723543bead..d680114b3e4 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -5045,6 +5045,10 @@ static int __devinit snd_hdsp_create(struct snd_card *card, /* we wait 2 seconds to let freshly inserted cardbus cards do their hardware init */ ssleep(2); + err = hdsp_check_for_iobox(hdsp); + if (err < 0) + return err; + if ((hdsp_read (hdsp, HDSP_statusRegister) & HDSP_DllError) != 0) { #ifdef HDSP_FW_LOADER if ((err = hdsp_request_fw_loader(hdsp)) < 0) @@ -5057,7 +5061,7 @@ static int __devinit snd_hdsp_create(struct snd_card *card, /* init is complete, we return */ return 0; #endif - /* no iobox connected, we defer initialization */ + /* we defer initialization */ snd_printk(KERN_INFO "Hammerfall-DSP: card initialization pending : waiting for firmware\n"); if ((err = snd_hdsp_create_hwdep(card, hdsp)) < 0) return err; -- cgit v1.2.3-70-g09d2 From 3ae7e2e22900b90bbe1d19454405950893c110be Mon Sep 17 00:00:00 2001 From: Tim Blechmann Date: Sat, 8 Nov 2008 14:42:18 +0100 Subject: ALSA: hdsp: check for iobox and upload firmware during ioctl currently, the error message when trying to run hdspmixer or hdspconf if the breakout box is not connected is somehow misleading, since it asks the user to upload the firmware. this patch adds a test, whether the breakout box is connected and tries to upload the firmware in the case, that it is not present, e.g. because of power failures of the breakout box. [Minor coding-style fixes by tiwai] Signed-off-by: Tim Blechmann Signed-off-by: Takashi Iwai --- sound/pci/rme9652/hdsp.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c index d680114b3e4..736246f98ac 100644 --- a/sound/pci/rme9652/hdsp.c +++ b/sound/pci/rme9652/hdsp.c @@ -4548,11 +4548,20 @@ static int snd_hdsp_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, unsigne { struct hdsp *hdsp = (struct hdsp *)hw->private_data; void __user *argp = (void __user *)arg; + int err; switch (cmd) { case SNDRV_HDSP_IOCTL_GET_PEAK_RMS: { struct hdsp_peak_rms __user *peak_rms = (struct hdsp_peak_rms __user *)arg; + err = hdsp_check_for_iobox(hdsp); + if (err < 0) + return err; + + err = hdsp_check_for_firmware(hdsp, 1); + if (err < 0) + return err; + if (!(hdsp->state & HDSP_FirmwareLoaded)) { snd_printk(KERN_ERR "Hammerfall-DSP: firmware needs to be uploaded to the card.\n"); return -EINVAL; @@ -4572,10 +4581,14 @@ static int snd_hdsp_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, unsigne unsigned long flags; int i; - if (!(hdsp->state & HDSP_FirmwareLoaded)) { - snd_printk(KERN_ERR "Hammerfall-DSP: Firmware needs to be uploaded to the card.\n"); - return -EINVAL; - } + err = hdsp_check_for_iobox(hdsp); + if (err < 0) + return err; + + err = hdsp_check_for_firmware(hdsp, 1); + if (err < 0) + return err; + spin_lock_irqsave(&hdsp->lock, flags); info.pref_sync_ref = (unsigned char)hdsp_pref_sync_ref(hdsp); info.wordclock_sync_check = (unsigned char)hdsp_wc_sync_check(hdsp); -- cgit v1.2.3-70-g09d2 From bbda14dfba26bd4ca5dc74f672518bc42120d765 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 30 Oct 2008 15:57:05 +0100 Subject: regulator: Use menuconfig in Kconfig Use menuconfig instead of flat configs so that you can disable/enable regulator items with one selection. Also, use depends instead of reverse selections to make life easier, too. Signed-off-by: Takashi Iwai Signed-off-by: Liam Girdwood --- drivers/regulator/Kconfig | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 4dada6ee111..39360e2a454 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -1,6 +1,4 @@ -menu "Voltage and Current regulators" - -config REGULATOR +menuconfig REGULATOR bool "Voltage and Current Regulator Support" default n help @@ -23,21 +21,20 @@ config REGULATOR If unsure, say no. +if REGULATOR + config REGULATOR_DEBUG bool "Regulator debug support" - depends on REGULATOR help Say yes here to enable debugging support. config REGULATOR_FIXED_VOLTAGE tristate default n - select REGULATOR config REGULATOR_VIRTUAL_CONSUMER tristate "Virtual regulator consumer support" default n - select REGULATOR help This driver provides a virtual consumer for the voltage and current regulator API which provides sysfs controls for @@ -49,7 +46,6 @@ config REGULATOR_VIRTUAL_CONSUMER config REGULATOR_BQ24022 tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" default n - select REGULATOR help This driver controls a TI bq24022 Charger attached via GPIOs. The provided current regulator can enable/disable @@ -59,7 +55,6 @@ config REGULATOR_BQ24022 config REGULATOR_WM8350 tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC" depends on MFD_WM8350 - select REGULATOR help This driver provides support for the voltage and current regulators of the WM8350 AudioPlus PMIC. @@ -67,7 +62,6 @@ config REGULATOR_WM8350 config REGULATOR_WM8400 tristate "Wolfson Microelectroncis WM8400 AudioPlus PMIC" depends on MFD_WM8400 - select REGULATOR help This driver provides support for the voltage regulators of the WM8400 AudioPlus PMIC. @@ -75,9 +69,8 @@ config REGULATOR_WM8400 config REGULATOR_DA903X tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC" depends on PMIC_DA903X - select REGULATOR help Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. -endmenu +endif -- cgit v1.2.3-70-g09d2 From 058e3739f6b0753696db1952378de9e8d2a11735 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sun, 9 Nov 2008 00:27:53 -0500 Subject: clarify usage expectations for cnt32_to_63() Currently, all existing users of cnt32_to_63() are fine since the CPU architectures where it is used don't do read access reordering, and user mode preemption is disabled already. It is nevertheless a good idea to better elaborate usage requirements wrt preemption, and use an explicit memory barrier on SMP to avoid different CPUs accessing the counter value in the wrong order. On UP a simple compiler barrier is sufficient. Signed-off-by: Nicolas Pitre Acked-by: Mathieu Desnoyers Signed-off-by: Linus Torvalds --- include/linux/cnt32_to_63.h | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/include/linux/cnt32_to_63.h b/include/linux/cnt32_to_63.h index 8c0f9505b48..7605fdd1eb6 100644 --- a/include/linux/cnt32_to_63.h +++ b/include/linux/cnt32_to_63.h @@ -16,6 +16,7 @@ #include #include #include +#include /* this is used only to give gcc a clue about good code generation */ union cnt32_to_63 { @@ -53,11 +54,19 @@ union cnt32_to_63 { * needed increment. And any race in updating the value in memory is harmless * as the same value would simply be stored more than once. * - * The only restriction for the algorithm to work properly is that this - * code must be executed at least once per each half period of the 32-bit - * counter to properly update the state bit in memory. This is usually not a - * problem in practice, but if it is then a kernel timer could be scheduled - * to manage for this code to be executed often enough. + * The restrictions for the algorithm to work properly are: + * + * 1) this code must be called at least once per each half period of the + * 32-bit counter; + * + * 2) this code must not be preempted for a duration longer than the + * 32-bit counter half period minus the longest period between two + * calls to this code. + * + * Those requirements ensure proper update to the state bit in memory. + * This is usually not a problem in practice, but if it is then a kernel + * timer should be scheduled to manage for this code to be executed often + * enough. * * Note that the top bit (bit 63) in the returned value should be considered * as garbage. It is not cleared here because callers are likely to use a @@ -68,9 +77,10 @@ union cnt32_to_63 { */ #define cnt32_to_63(cnt_lo) \ ({ \ - static volatile u32 __m_cnt_hi; \ + static u32 __m_cnt_hi; \ union cnt32_to_63 __x; \ __x.hi = __m_cnt_hi; \ + smp_rmb(); \ __x.lo = (cnt_lo); \ if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \ __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \ -- cgit v1.2.3-70-g09d2 From 6209344f5a3795d34b7f2c0061f49802283b6bdd Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Sun, 9 Nov 2008 15:23:57 +0100 Subject: net: unix: fix inflight counting bug in garbage collector Previously I assumed that the receive queues of candidates don't change during the GC. This is only half true, nothing can be received from the queues (see comment in unix_gc()), but buffers could be added through the other half of the socket pair, which may still have file descriptors referring to it. This can result in inc_inflight_move_tail() erronously increasing the "inflight" counter for a unix socket for which dec_inflight() wasn't previously called. This in turn can trigger the "BUG_ON(total_refs < inflight_refs)" in a later garbage collection run. Fix this by only manipulating the "inflight" counter for sockets which are candidates themselves. Duplicating the file references in unix_attach_fds() is also needed to prevent a socket becoming a candidate for GC while the skb that contains it is not yet queued. Reported-by: Andrea Bittau Signed-off-by: Miklos Szeredi CC: stable@kernel.org Signed-off-by: Linus Torvalds --- include/net/af_unix.h | 1 + net/unix/af_unix.c | 31 ++++++++++++++++++++++++------- net/unix/garbage.c | 49 +++++++++++++++++++++++++++++++++++++------------ 3 files changed, 62 insertions(+), 19 deletions(-) diff --git a/include/net/af_unix.h b/include/net/af_unix.h index 7dd29b7e461..c29ff1da8a1 100644 --- a/include/net/af_unix.h +++ b/include/net/af_unix.h @@ -54,6 +54,7 @@ struct unix_sock { atomic_long_t inflight; spinlock_t lock; unsigned int gc_candidate : 1; + unsigned int gc_maybe_cycle : 1; wait_queue_head_t peer_wait; }; #define unix_sk(__sk) ((struct unix_sock *)__sk) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 4d3c6071b9a..eb90f77bb0e 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -1302,14 +1302,23 @@ static void unix_destruct_fds(struct sk_buff *skb) sock_wfree(skb); } -static void unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb) +static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb) { int i; + + /* + * Need to duplicate file references for the sake of garbage + * collection. Otherwise a socket in the fps might become a + * candidate for GC while the skb is not yet queued. + */ + UNIXCB(skb).fp = scm_fp_dup(scm->fp); + if (!UNIXCB(skb).fp) + return -ENOMEM; + for (i=scm->fp->count-1; i>=0; i--) unix_inflight(scm->fp->fp[i]); - UNIXCB(skb).fp = scm->fp; skb->destructor = unix_destruct_fds; - scm->fp = NULL; + return 0; } /* @@ -1368,8 +1377,11 @@ static int unix_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock, goto out; memcpy(UNIXCREDS(skb), &siocb->scm->creds, sizeof(struct ucred)); - if (siocb->scm->fp) - unix_attach_fds(siocb->scm, skb); + if (siocb->scm->fp) { + err = unix_attach_fds(siocb->scm, skb); + if (err) + goto out_free; + } unix_get_secdata(siocb->scm, skb); skb_reset_transport_header(skb); @@ -1538,8 +1550,13 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock, size = min_t(int, size, skb_tailroom(skb)); memcpy(UNIXCREDS(skb), &siocb->scm->creds, sizeof(struct ucred)); - if (siocb->scm->fp) - unix_attach_fds(siocb->scm, skb); + if (siocb->scm->fp) { + err = unix_attach_fds(siocb->scm, skb); + if (err) { + kfree_skb(skb); + goto out_err; + } + } if ((err = memcpy_fromiovec(skb_put(skb,size), msg->msg_iov, size)) != 0) { kfree_skb(skb); diff --git a/net/unix/garbage.c b/net/unix/garbage.c index 2a27b84f740..6d4a9a8de5e 100644 --- a/net/unix/garbage.c +++ b/net/unix/garbage.c @@ -186,8 +186,17 @@ static void scan_inflight(struct sock *x, void (*func)(struct unix_sock *), */ struct sock *sk = unix_get_socket(*fp++); if (sk) { - hit = true; - func(unix_sk(sk)); + struct unix_sock *u = unix_sk(sk); + + /* + * Ignore non-candidates, they could + * have been added to the queues after + * starting the garbage collection + */ + if (u->gc_candidate) { + hit = true; + func(u); + } } } if (hit && hitlist != NULL) { @@ -249,11 +258,11 @@ static void inc_inflight_move_tail(struct unix_sock *u) { atomic_long_inc(&u->inflight); /* - * If this is still a candidate, move it to the end of the - * list, so that it's checked even if it was already passed - * over + * If this still might be part of a cycle, move it to the end + * of the list, so that it's checked even if it was already + * passed over */ - if (u->gc_candidate) + if (u->gc_maybe_cycle) list_move_tail(&u->link, &gc_candidates); } @@ -267,6 +276,7 @@ void unix_gc(void) struct unix_sock *next; struct sk_buff_head hitlist; struct list_head cursor; + LIST_HEAD(not_cycle_list); spin_lock(&unix_gc_lock); @@ -282,10 +292,14 @@ void unix_gc(void) * * Holding unix_gc_lock will protect these candidates from * being detached, and hence from gaining an external - * reference. This also means, that since there are no - * possible receivers, the receive queues of these sockets are - * static during the GC, even though the dequeue is done - * before the detach without atomicity guarantees. + * reference. Since there are no possible receivers, all + * buffers currently on the candidates' queues stay there + * during the garbage collection. + * + * We also know that no new candidate can be added onto the + * receive queues. Other, non candidate sockets _can_ be + * added to queue, so we must make sure only to touch + * candidates. */ list_for_each_entry_safe(u, next, &gc_inflight_list, link) { long total_refs; @@ -299,6 +313,7 @@ void unix_gc(void) if (total_refs == inflight_refs) { list_move_tail(&u->link, &gc_candidates); u->gc_candidate = 1; + u->gc_maybe_cycle = 1; } } @@ -325,13 +340,23 @@ void unix_gc(void) list_move(&cursor, &u->link); if (atomic_long_read(&u->inflight) > 0) { - list_move_tail(&u->link, &gc_inflight_list); - u->gc_candidate = 0; + list_move_tail(&u->link, ¬_cycle_list); + u->gc_maybe_cycle = 0; scan_children(&u->sk, inc_inflight_move_tail, NULL); } } list_del(&cursor); + /* + * not_cycle_list contains those sockets which do not make up a + * cycle. Restore these to the inflight list. + */ + while (!list_empty(¬_cycle_list)) { + u = list_entry(not_cycle_list.next, struct unix_sock, link); + u->gc_candidate = 0; + list_move_tail(&u->link, &gc_inflight_list); + } + /* * Now gc_candidates contains only garbage. Restore original * inflight counters for these as well, and remove the skbuffs -- cgit v1.2.3-70-g09d2 From 984f2f377fdfd098f5ae58d09ee04d5e29e6112b Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sat, 8 Nov 2008 20:24:19 +1100 Subject: cpumask: introduce new API, without changing anything, v3 Impact: cleanup Clean up based on feedback from Andrew Morton and others: - change to inline functions instead of macros - add __init to bootmem method - add a missing debug check Signed-off-by: Rusty Russell Signed-off-by: Ingo Molnar --- include/linux/cpumask.h | 58 ++++++++++++++++++++++++++++++++++++++++++++----- lib/cpumask.c | 3 ++- 2 files changed, 54 insertions(+), 7 deletions(-) diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 31caa1bc620..21e1dd43e52 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -564,12 +564,36 @@ static inline unsigned int cpumask_check(unsigned int cpu) } #if NR_CPUS == 1 -/* Uniprocesor. */ -#define cpumask_first(src) ({ (void)(src); 0; }) -#define cpumask_next(n, src) ({ (void)(src); 1; }) -#define cpumask_next_zero(n, src) ({ (void)(src); 1; }) -#define cpumask_next_and(n, srcp, andp) ({ (void)(srcp), (void)(andp); 1; }) -#define cpumask_any_but(mask, cpu) ({ (void)(mask); (void)(cpu); 0; }) +/* Uniprocessor. Assume all masks are "1". */ +static inline unsigned int cpumask_first(const struct cpumask *srcp) +{ + return 0; +} + +/* Valid inputs for n are -1 and 0. */ +static inline unsigned int cpumask_next(int n, const struct cpumask *srcp) +{ + return n+1; +} + +static inline unsigned int cpumask_next_zero(int n, const struct cpumask *srcp) +{ + return n+1; +} + +static inline unsigned int cpumask_next_and(int n, + const struct cpumask *srcp, + const struct cpumask *andp) +{ + return n+1; +} + +/* cpu must be a valid cpu, ie 0, so there's no other choice. */ +static inline unsigned int cpumask_any_but(const struct cpumask *mask, + unsigned int cpu) +{ + return 1; +} #define for_each_cpu(cpu, mask) \ for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask) @@ -620,10 +644,32 @@ static inline unsigned int cpumask_next_zero(int n, const struct cpumask *srcp) int cpumask_next_and(int n, const struct cpumask *, const struct cpumask *); int cpumask_any_but(const struct cpumask *mask, unsigned int cpu); +/** + * for_each_cpu - iterate over every cpu in a mask + * @cpu: the (optionally unsigned) integer iterator + * @mask: the cpumask pointer + * + * After the loop, cpu is >= nr_cpu_ids. + */ #define for_each_cpu(cpu, mask) \ for ((cpu) = -1; \ (cpu) = cpumask_next((cpu), (mask)), \ (cpu) < nr_cpu_ids;) + +/** + * for_each_cpu_and - iterate over every cpu in both masks + * @cpu: the (optionally unsigned) integer iterator + * @mask: the first cpumask pointer + * @and: the second cpumask pointer + * + * This saves a temporary CPU mask in many places. It is equivalent to: + * struct cpumask tmp; + * cpumask_and(&tmp, &mask, &and); + * for_each_cpu(cpu, &tmp) + * ... + * + * After the loop, cpu is >= nr_cpu_ids. + */ #define for_each_cpu_and(cpu, mask, and) \ for ((cpu) = -1; \ (cpu) = cpumask_next_and((cpu), (mask), (and)), \ diff --git a/lib/cpumask.c b/lib/cpumask.c index 2ebc3a9a746..8d03f22c6ce 100644 --- a/lib/cpumask.c +++ b/lib/cpumask.c @@ -67,6 +67,7 @@ int cpumask_any_but(const struct cpumask *mask, unsigned int cpu) { unsigned int i; + cpumask_check(cpu); for_each_cpu(i, mask) if (i != cpu) break; @@ -108,7 +109,7 @@ void free_cpumask_var(cpumask_var_t mask) } EXPORT_SYMBOL(free_cpumask_var); -void free_bootmem_cpumask_var(cpumask_var_t mask) +void __init free_bootmem_cpumask_var(cpumask_var_t mask) { free_bootmem((unsigned long)mask, cpumask_size()); } -- cgit v1.2.3-70-g09d2 From b726e923ea4d216027e466aa602d914e4b4a63af Mon Sep 17 00:00:00 2001 From: Doug Nazar Date: Wed, 5 Nov 2008 06:16:28 -0500 Subject: Fix nfsd truncation of readdir results Commit 8d7c4203 "nfsd: fix failure to set eof in readdir in some situations" introduced a bug: on a directory in an exported ext3 filesystem with dir_index unset, a READDIR will only return about 250 entries, even if the directory was larger. Bisected it back to this commit; reverting it fixes the problem. It turns out that in this case ext3 reads a block at a time, then returns from readdir, which means we can end up with buf.full==0 but with more entries in the directory still to be read. Before 8d7c4203 (but after c002a6c797 "Optimise NFS readdir hack slightly"), this would cause us to return the READDIR result immediately, but with the eof bit unset. That could cause a performance regression (because the client would need more roundtrips to the server to read the whole directory), but no loss in correctness, since the cleared eof bit caused the client to send another readdir. After 8d7c4203, the setting of the eof bit made this a correctness problem. So, move nfserr_eof into the loop and remove the buf.full check so that we loop until buf.used==0. The following seems to do the right thing and reduces the network traffic since we don't return a READDIR result until the buffer is full. Tested on an empty directory & large directory; eof is properly sent and there are no more short buffers. Signed-off-by: Doug Nazar Cc: David Woodhouse Cc: Al Viro Signed-off-by: J. Bruce Fields --- fs/nfsd/vfs.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index 848a03e83a4..4433c8f0016 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -1875,11 +1875,11 @@ static int nfsd_buffered_readdir(struct file *file, filldir_t func, return -ENOMEM; offset = *offsetp; - cdp->err = nfserr_eof; /* will be cleared on successful read */ while (1) { unsigned int reclen; + cdp->err = nfserr_eof; /* will be cleared on successful read */ buf.used = 0; buf.full = 0; @@ -1912,9 +1912,6 @@ static int nfsd_buffered_readdir(struct file *file, filldir_t func, de = (struct buffered_dirent *)((char *)de + reclen); } offset = vfs_llseek(file, 0, SEEK_CUR); - cdp->err = nfserr_eof; - if (!buf.full) - break; } done: -- cgit v1.2.3-70-g09d2 From 980fc29f20f5cfb8cef29ddfccecb685f299ada4 Mon Sep 17 00:00:00 2001 From: Marc Pignat Date: Thu, 6 Nov 2008 11:44:34 +0100 Subject: pcmcia: add another pata/ide ID Support for Apacer photo steno pro card. Signed-off-by: Marc Pignat Signed-off-by: Dominik Brodowski CC: Alan Cox Date: Sun, 9 Nov 2008 12:47:04 -0800 Subject: Don't ask twice about not including staging drivers The "Exclude staging drivers" question is there so that we don't build staging drivers for allyesconfig or allnoconfig settings, but it's very irritating when you've already said "no" to staging drivers earlier. There is absolutely no point in declining twice - once you've declined the staging drivers, you're done. So make the second question depend on the first question having been answered in the affirmative. Signed-off-by: Linus Torvalds --- drivers/staging/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 0a49cd788a7..c95b286a123 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -23,7 +23,7 @@ menuconfig STAGING config STAGING_EXCLUDE_BUILD - bool "Exclude Staging drivers from being built" + bool "Exclude Staging drivers from being built" if STAGING default y ---help--- Are you sure you really want to build the staging drivers? -- cgit v1.2.3-70-g09d2 From b1769450da0eeae2d95aae5496acbdf4c6ba89b2 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 9 Nov 2008 21:47:47 +0100 Subject: pcmcia: ensure correct logging in do_io_probe Signed-off-by: Dominik Brodowski --- drivers/pcmcia/cs.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index 5d0e60e09d3..0660ad18258 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -186,12 +186,6 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) spin_lock_init(&socket->lock); - if (socket->resource_ops->init) { - ret = socket->resource_ops->init(socket); - if (ret) - return (ret); - } - /* try to obtain a socket number [yes, it gets ugly if we * register more than 2^sizeof(unsigned int) pcmcia * sockets... but the socket number is deprecated @@ -239,6 +233,12 @@ int pcmcia_register_socket(struct pcmcia_socket *socket) mutex_init(&socket->skt_mutex); spin_lock_init(&socket->thread_lock); + if (socket->resource_ops->init) { + ret = socket->resource_ops->init(socket); + if (ret) + goto err; + } + tsk = kthread_run(pccardd, socket, "pccardd"); if (IS_ERR(tsk)) { ret = PTR_ERR(tsk); -- cgit v1.2.3-70-g09d2 From bf1b36445dc868cbbde194aa1dd87e38fe24cf16 Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Sat, 13 Sep 2008 17:08:31 +0100 Subject: kbuild: Fixup deb-pkg target to generate separate firmware deb The below is a simplistic fix for "make deb-pkg"; it splits the firmware out to a linux-firmware-image package and adds an (unversioned) Suggests to the linux package for this firmware. Signed-Off-By: Jonathan McDowell Acked-by: Frans Pop Signed-off-by: Sam Ravnborg --- scripts/package/builddeb | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/scripts/package/builddeb b/scripts/package/builddeb index ba6bf5d5abf..1264b8e2829 100644 --- a/scripts/package/builddeb +++ b/scripts/package/builddeb @@ -15,15 +15,18 @@ set -e version=$KERNELRELEASE revision=`cat .version` tmpdir="$objtree/debian/tmp" +fwdir="$objtree/debian/fwtmp" packagename=linux-$version +fwpackagename=linux-firmware-image if [ "$ARCH" == "um" ] ; then packagename=user-mode-linux-$version fi # Setup the directory structure -rm -rf "$tmpdir" +rm -rf "$tmpdir" "$fwdir" mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot" +mkdir -p "$fwdir/DEBIAN" "$fwdir/lib" if [ "$ARCH" == "um" ] ; then mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/share/doc/$packagename" "$tmpdir/usr/bin" fi @@ -107,6 +110,7 @@ Standards-Version: 3.6.1 Package: $packagename Provides: kernel-image-$version, linux-image-$version +Suggests: $fwpackagename Architecture: any Description: Linux kernel, version $version This package contains the Linux kernel, modules and corresponding other @@ -118,8 +122,24 @@ fi chown -R root:root "$tmpdir" chmod -R go-w "$tmpdir" +# Do we have firmware? Move it out of the way and build it into a package. +if [ -e "$tmpdir/lib/firmware" ]; then + mv "$tmpdir/lib/firmware" "$fwdir/lib/" + + cat <> debian/control + +Package: $fwpackagename +Architecture: all +Description: Linux kernel firmware, version $version + This package contains firmware from the Linux kernel, version $version +EOF + + dpkg-gencontrol -isp -p$fwpackagename -P"$fwdir" + dpkg --build "$fwdir" .. +fi + # Perform the final magic -dpkg-gencontrol -isp +dpkg-gencontrol -isp -p$packagename dpkg --build "$tmpdir" .. exit 0 -- cgit v1.2.3-70-g09d2 From 9a6558371bcd01c2973b7638181db4ccc34eab4f Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sun, 9 Nov 2008 12:45:10 -0800 Subject: regression: disable timer peek-ahead for 2.6.28 It's showing up as regressions; disabling it very likely just papers over an underlying issue, but time is running out for 2.6.28, lets get back to this for 2.6.29 Fixes: #11826 and #11893 Signed-off-by: Arjan van de Ven Signed-off-by: Linus Torvalds --- drivers/cpuidle/cpuidle.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index 5bed73329ef..8504a210855 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -65,12 +65,14 @@ static void cpuidle_idle_call(void) return; } +#if 0 + /* shows regressions, re-enable for 2.6.29 */ /* * run any timers that can be run now, at this point * before calculating the idle duration etc. */ hrtimer_peek_ahead_timers(); - +#endif /* ask the governor for the next state */ next_state = cpuidle_curr_governor->select(dev); if (need_resched()) -- cgit v1.2.3-70-g09d2 From f7160c7573615ec82c691e294cf80d920b5d588d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 9 Nov 2008 16:36:15 -0800 Subject: Linux 2.6.28-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 29abe62ccba..7f9ff9bf154 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 28 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Killer Bat of Doom # *DOCUMENTATION* -- cgit v1.2.3-70-g09d2 From 9ccbece546cf836f67f6d9bb4bf2f70f7476cb2c Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Thu, 30 Oct 2008 16:53:25 +1100 Subject: [XFS] Fix use-after-free with log and quotas Destroying the quota stuff on unmount can access the log - ie XFS_QM_DONE() ends up in xfs_dqunlock() which calls xfs_trans_unlocked_item() and then xfs_log_move_tail(). By this time the log has already been destroyed. Just move the cleanup of the quota code earlier in xfs_unmountfs() before the call to xfs_log_unmount(). Moving XFS_QM_DONE() up near XFS_QM_DQPURGEALL() seems like a good spot. SGI-PV: 987086 SGI-Modid: xfs-linux-melb:xfs-kern:32148a Signed-off-by: Lachlan McIlroy Signed-off-by: Christoph Hellwig Signed-off-by: Peter Leckie --- fs/xfs/xfs_mount.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index a4503f5e949..15f5dd22fbb 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -1245,6 +1245,9 @@ xfs_unmountfs( XFS_QM_DQPURGEALL(mp, XFS_QMOPT_QUOTALL | XFS_QMOPT_UMOUNTING); + if (mp->m_quotainfo) + XFS_QM_DONE(mp); + /* * Flush out the log synchronously so that we know for sure * that nothing is pinned. This is important because bflush() @@ -1297,8 +1300,6 @@ xfs_unmountfs( xfs_errortag_clearall(mp, 0); #endif xfs_free_perag(mp); - if (mp->m_quotainfo) - XFS_QM_DONE(mp); } STATIC void -- cgit v1.2.3-70-g09d2 From 2cf7f0da3ae225848a2ee10d4e216448a770fd00 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Thu, 30 Oct 2008 16:59:06 +1100 Subject: [XFS] Wait for all I/O on truncate to zero file size It's possible to have outstanding xfs_ioend_t's queued when the file size is zero. This can happen in the direct I/O path when a direct I/O write fails due to ENOSPC. In this case the xfs_ioend_t will still be queued (ie xfs_end_io_direct() does not know that the I/O failed so can't force the xfs_ioend_t to be flushed synchronously). When we truncate a file on unlink we don't know to wait for these xfs_ioend_ts and we can have a use-after-free situation if the inode is reclaimed before the xfs_ioend_t is finally processed. As was suggested by Dave Chinner lets wait for all I/Os to complete when truncating the file size to zero. SGI-PV: 981668 SGI-Modid: xfs-linux-melb:xfs-kern:32216a Signed-off-by: Lachlan McIlroy Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index dbd9cef852e..a391b955df0 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1414,7 +1414,7 @@ xfs_itruncate_start( mp = ip->i_mount; /* wait for the completion of any pending DIOs */ - if (new_size < ip->i_size) + if (new_size == 0 || new_size < ip->i_size) vn_iowait(ip); /* -- cgit v1.2.3-70-g09d2 From 6f9f51adb6ac0a49fce49e01c47dcfc2810c6e9d Mon Sep 17 00:00:00 2001 From: David Chinner Date: Thu, 30 Oct 2008 17:38:12 +1100 Subject: [XFS] Account for allocated blocks when expanding directories When we create a directory, we reserve a number of blocks for the maximum possible expansion of of the directory due to various btree splits, freespace allocation, etc. Unfortunately, each allocation is not reflected in the total number of blocks still available to the transaction, so the maximal reservation is used over and over again. This leads to problems where an allocation group has only enough blocks for *some* of the allocations required for the directory modification. After the first N allocations, the remaining blocks in the allocation group drops below the total reservation, and subsequent allocations fail because the allocator will not allow the allocation to proceed if the AG does not have the enough blocks available for the entire allocation total. This results in an ENOSPC occurring after an allocation has already occurred. This results in aborting the directory operation (leaving the directory in an inconsistent state) and cancelling a dirty transaction, which results in a filesystem shutdown. Avoid the problem by reflecting the number of blocks allocated in any directory expansion in the total number of blocks available to the modification in progress. This prevents a directory modification from being aborted part way through with an ENOSPC. SGI-PV: 988144 SGI-Modid: xfs-linux-melb:xfs-kern:32340a Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_da_btree.c | 5 +++++ fs/xfs/xfs_dir2.c | 6 ++++++ 2 files changed, 11 insertions(+) diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index 9e561a9cefc..a11a8390bf6 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -1566,11 +1566,14 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) int nmap, error, w, count, c, got, i, mapi; xfs_trans_t *tp; xfs_mount_t *mp; + xfs_drfsbno_t nblks; dp = args->dp; mp = dp->i_mount; w = args->whichfork; tp = args->trans; + nblks = dp->i_d.di_nblocks; + /* * For new directories adjust the file offset and block count. */ @@ -1647,6 +1650,8 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) } if (mapp != &map) kmem_free(mapp); + /* account for newly allocated blocks in reserved blocks total */ + args->total -= dp->i_d.di_nblocks - nblks; *new_blkno = (xfs_dablk_t)bno; return 0; } diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c index 80e0dc51361..1afb12278b8 100644 --- a/fs/xfs/xfs_dir2.c +++ b/fs/xfs/xfs_dir2.c @@ -525,11 +525,13 @@ xfs_dir2_grow_inode( xfs_mount_t *mp; int nmap; /* number of bmap entries */ xfs_trans_t *tp; + xfs_drfsbno_t nblks; xfs_dir2_trace_args_s("grow_inode", args, space); dp = args->dp; tp = args->trans; mp = dp->i_mount; + nblks = dp->i_d.di_nblocks; /* * Set lowest possible block in the space requested. */ @@ -622,7 +624,11 @@ xfs_dir2_grow_inode( */ if (mapp != &map) kmem_free(mapp); + + /* account for newly allocated blocks in reserved blocks total */ + args->total -= dp->i_d.di_nblocks - nblks; *dbp = xfs_dir2_da_to_db(mp, (xfs_dablk_t)bno); + /* * Update file's size if this is the data space and it grew. */ -- cgit v1.2.3-70-g09d2 From 0f101fa6bccdc797ddcee40fd4c55e879155a40f Mon Sep 17 00:00:00 2001 From: Ville Syrjala Date: Sun, 9 Nov 2008 20:32:40 +0200 Subject: ALSA: gusextreme: Fix build errors gusextreme depends on opl3 support. Add the approriate select to Kconfig. Also remove the unnecessary hwdep select. Relevant build errors: ERROR: "snd_opl3_hwdep_new" [sound/isa/gus/snd-gusextreme.ko] undefined! ERROR: "snd_opl3_create" [sound/isa/gus/snd-gusextreme.ko] undefined! Signed-off-by: Ville Syrjala Signed-off-by: Takashi Iwai --- sound/isa/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index 660beb41f76..ce0aa044e27 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -211,7 +211,7 @@ config SND_GUSCLASSIC config SND_GUSEXTREME tristate "Gravis UltraSound Extreme" - select SND_HWDEP + select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM help -- cgit v1.2.3-70-g09d2 From 8f330f5149ef41ff943b04d914406cc417f62784 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 10 Nov 2008 16:50:24 +1100 Subject: [XFS] handle memory allocation failures during log initialisation When there is no memory left in the system, xfs_buf_get_noaddr() can fail. If this happens at mount time during xlog_alloc_log() we fail to catch the error and oops. Catch the error from xfs_buf_get_noaddr(), and allow other memory allocations to fail and catch those errors too. Report the error to the console and fail the mount with ENOMEM. Tested by manually injecting errors into xfs_buf_get_noaddr() and xlog_alloc_log(). Version 2: o remove unnecessary casts of the returned pointer from kmem_zalloc() SGI-PV: 987246 Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_log.c | 39 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 36 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 0b02c644355..3608a0f0a5f 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -563,6 +563,11 @@ xfs_log_mount( } mp->m_log = xlog_alloc_log(mp, log_target, blk_offset, num_bblks); + if (!mp->m_log) { + cmn_err(CE_WARN, "XFS: Log allocation failed: No memory!"); + error = ENOMEM; + goto out; + } /* * Initialize the AIL now we have a log. @@ -601,6 +606,7 @@ xfs_log_mount( return 0; error: xfs_log_unmount_dealloc(mp); +out: return error; } /* xfs_log_mount */ @@ -1217,7 +1223,9 @@ xlog_alloc_log(xfs_mount_t *mp, int i; int iclogsize; - log = (xlog_t *)kmem_zalloc(sizeof(xlog_t), KM_SLEEP); + log = kmem_zalloc(sizeof(xlog_t), KM_MAYFAIL); + if (!log) + return NULL; log->l_mp = mp; log->l_targ = log_target; @@ -1249,6 +1257,8 @@ xlog_alloc_log(xfs_mount_t *mp, xlog_get_iclog_buffer_size(mp, log); bp = xfs_buf_get_empty(log->l_iclog_size, mp->m_logdev_targp); + if (!bp) + goto out_free_log; XFS_BUF_SET_IODONE_FUNC(bp, xlog_iodone); XFS_BUF_SET_BDSTRAT_FUNC(bp, xlog_bdstrat_cb); XFS_BUF_SET_FSPRIVATE2(bp, (unsigned long)1); @@ -1275,13 +1285,17 @@ xlog_alloc_log(xfs_mount_t *mp, iclogsize = log->l_iclog_size; ASSERT(log->l_iclog_size >= 4096); for (i=0; i < log->l_iclog_bufs; i++) { - *iclogp = (xlog_in_core_t *) - kmem_zalloc(sizeof(xlog_in_core_t), KM_SLEEP); + *iclogp = kmem_zalloc(sizeof(xlog_in_core_t), KM_MAYFAIL); + if (!*iclogp) + goto out_free_iclog; + iclog = *iclogp; iclog->ic_prev = prev_iclog; prev_iclog = iclog; bp = xfs_buf_get_noaddr(log->l_iclog_size, mp->m_logdev_targp); + if (!bp) + goto out_free_iclog; if (!XFS_BUF_CPSEMA(bp)) ASSERT(0); XFS_BUF_SET_IODONE_FUNC(bp, xlog_iodone); @@ -1323,6 +1337,25 @@ xlog_alloc_log(xfs_mount_t *mp, log->l_iclog->ic_prev = prev_iclog; /* re-write 1st prev ptr */ return log; + +out_free_iclog: + for (iclog = log->l_iclog; iclog; iclog = prev_iclog) { + prev_iclog = iclog->ic_next; + if (iclog->ic_bp) { + sv_destroy(&iclog->ic_force_wait); + sv_destroy(&iclog->ic_write_wait); + xfs_buf_free(iclog->ic_bp); + xlog_trace_iclog_dealloc(iclog); + } + kmem_free(iclog); + } + spinlock_destroy(&log->l_icloglock); + spinlock_destroy(&log->l_grant_lock); + xlog_trace_loggrant_dealloc(log); + xfs_buf_free(log->l_xbuf); +out_free_log: + kmem_free(log); + return NULL; } /* xlog_alloc_log */ -- cgit v1.2.3-70-g09d2 From 220ca310a53200b4bfbc7c4c6e365eea284ec44f Mon Sep 17 00:00:00 2001 From: David Chinner Date: Thu, 30 Oct 2008 17:40:09 +1100 Subject: [XFS] XFS: Check for valid transaction headers in recovery When we are about to add a new item to a transaction in recovery, we need to check that it is valid first. Currently we just assert that header magic number matches, but in production systems that is not present and we add a corrupted transaction to the list to be processed. This results in a kernel oops later when processing the corrupted transaction. Instead, if we detect a corrupted transaction, abort recovery and leave the user to clean up the mess that has occurred. SGI-PV: 988145 SGI-Modid: xfs-linux-melb:xfs-kern:32356a Signed-off-by: David Chinner Signed-off-by: Tim Shimmin Signed-off-by: Eric Sandeen Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_log_recover.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 82d46ce69d5..70e3ba32e6b 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1419,7 +1419,13 @@ xlog_recover_add_to_trans( return 0; item = trans->r_itemq; if (item == NULL) { - ASSERT(*(uint *)dp == XFS_TRANS_HEADER_MAGIC); + /* we need to catch log corruptions here */ + if (*(uint *)dp != XFS_TRANS_HEADER_MAGIC) { + xlog_warn("XFS: xlog_recover_add_to_trans: " + "bad header magic number"); + ASSERT(0); + return XFS_ERROR(EIO); + } if (len == sizeof(xfs_trans_header_t)) xlog_recover_add_item(&trans->r_itemq); memcpy(&trans->r_theader, dp, len); /* d, s, l */ -- cgit v1.2.3-70-g09d2 From 5ac5c4d604bf894ef672a7971d03fefdc7ea7e49 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 10 Nov 2008 10:46:32 +0100 Subject: sched: clean up debug info Impact: clean up and fix debug info printout While looking over the sched_debug code I noticed that we printed the rq schedstats for every cfs_rq, ammend this. Also change nr_spead_over into an int, and fix a little buglet in min_vruntime printing. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- kernel/sched_debug.c | 41 +++++++++++++++++++++-------------------- 2 files changed, 22 insertions(+), 21 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 57c933ffbee..f3149244e32 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -399,7 +399,7 @@ struct cfs_rq { */ struct sched_entity *curr, *next, *last; - unsigned long nr_spread_over; + unsigned int nr_spread_over; #ifdef CONFIG_FAIR_GROUP_SCHED struct rq *rq; /* cpu runqueue to which this cfs_rq is attached */ diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index 5ae17762ec3..48ecc51e770 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -144,7 +144,7 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) last = __pick_last_entity(cfs_rq); if (last) max_vruntime = last->vruntime; - min_vruntime = rq->cfs.min_vruntime; + min_vruntime = cfs_rq->min_vruntime; rq0_min_vruntime = per_cpu(runqueues, 0).cfs.min_vruntime; spin_unlock_irqrestore(&rq->lock, flags); SEQ_printf(m, " .%-30s: %Ld.%06ld\n", "MIN_vruntime", @@ -161,26 +161,8 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) SPLIT_NS(spread0)); SEQ_printf(m, " .%-30s: %ld\n", "nr_running", cfs_rq->nr_running); SEQ_printf(m, " .%-30s: %ld\n", "load", cfs_rq->load.weight); -#ifdef CONFIG_SCHEDSTATS -#define P(n) SEQ_printf(m, " .%-30s: %d\n", #n, rq->n); - - P(yld_exp_empty); - P(yld_act_empty); - P(yld_both_empty); - P(yld_count); - P(sched_switch); - P(sched_count); - P(sched_goidle); - - P(ttwu_count); - P(ttwu_local); - - P(bkl_count); - -#undef P -#endif - SEQ_printf(m, " .%-30s: %ld\n", "nr_spread_over", + SEQ_printf(m, " .%-30s: %d\n", "nr_spread_over", cfs_rq->nr_spread_over); #ifdef CONFIG_FAIR_GROUP_SCHED #ifdef CONFIG_SMP @@ -260,6 +242,25 @@ static void print_cpu(struct seq_file *m, int cpu) #undef P #undef PN +#ifdef CONFIG_SCHEDSTATS +#define P(n) SEQ_printf(m, " .%-30s: %d\n", #n, rq->n); + + P(yld_exp_empty); + P(yld_act_empty); + P(yld_both_empty); + P(yld_count); + + P(sched_switch); + P(sched_count); + P(sched_goidle); + + P(ttwu_count); + P(ttwu_local); + + P(bkl_count); + +#undef P +#endif print_cfs_stats(m, cpu); print_rt_stats(m, cpu); -- cgit v1.2.3-70-g09d2 From acca4f4d9bd657e8bc7e1665ba5077465138f133 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 10 Nov 2008 20:00:45 +0900 Subject: sh: Handle fixmap TLB eviction more coherently. There was a race in the kmap_coherent() implementation. While we guarded against preemption, there was nothing preventing eviction of the pre-faulted fixmap entry from the UTLB. Under certain workloads this would result in the fixmap entries used for cache colouring being evicted from the UTLB in the midst of a copy_page(). In addition to pre-faulting, we also make sure to preserve the PTEs in the kernel page table and introduce a cached PTE for kmap_coherent() usage. This follows a similar change on MIPS ("[MIPS] Fix aliasing bug in copy_to_user_page / copy_from_user_page"). Reported-by: Hideo Saito Reported-by: CHIKAMA Masaki Tested-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/include/asm/pgtable.h | 6 ++++++ arch/sh/mm/init.c | 12 +++++++++--- arch/sh/mm/pg-sh4.c | 17 +++++++++++++++++ 3 files changed, 32 insertions(+), 3 deletions(-) diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h index 52220d70a09..b517ae08b9c 100644 --- a/arch/sh/include/asm/pgtable.h +++ b/arch/sh/include/asm/pgtable.h @@ -148,6 +148,12 @@ extern void paging_init(void); extern void page_table_range_init(unsigned long start, unsigned long end, pgd_t *pgd); +#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_CPU_SH4) && defined(CONFIG_MMU) +extern void kmap_coherent_init(void); +#else +#define kmap_coherent_init() do { } while (0) +#endif + #include #endif /* __ASM_SH_PGTABLE_H */ diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 4abf00031da..6cbef8caeb5 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -137,6 +137,7 @@ void __init page_table_range_init(unsigned long start, unsigned long end, void __init paging_init(void) { unsigned long max_zone_pfns[MAX_NR_ZONES]; + unsigned long vaddr; int nid; /* We don't need to map the kernel through the TLB, as @@ -148,10 +149,15 @@ void __init paging_init(void) * check for a null value. */ set_TTB(swapper_pg_dir); - /* Populate the relevant portions of swapper_pg_dir so that + /* + * Populate the relevant portions of swapper_pg_dir so that * we can use the fixmap entries without calling kmalloc. - * pte's will be filled in by __set_fixmap(). */ - page_table_range_init(FIXADDR_START, FIXADDR_TOP, swapper_pg_dir); + * pte's will be filled in by __set_fixmap(). + */ + vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK; + page_table_range_init(vaddr, 0, swapper_pg_dir); + + kmap_coherent_init(); memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index 38870e0fc18..2fe14da1f83 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -7,6 +7,7 @@ * Released under the terms of the GNU GPL v2.0. */ #include +#include #include #include #include @@ -16,6 +17,20 @@ #define CACHE_ALIAS (current_cpu_data.dcache.alias_mask) +#define kmap_get_fixmap_pte(vaddr) \ + pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr)) + +static pte_t *kmap_coherent_pte; + +void __init kmap_coherent_init(void) +{ + unsigned long vaddr; + + /* cache the first coherent kmap pte */ + vaddr = __fix_to_virt(FIX_CMAP_BEGIN); + kmap_coherent_pte = kmap_get_fixmap_pte(vaddr); +} + static inline void *kmap_coherent(struct page *page, unsigned long addr) { enum fixed_addresses idx; @@ -34,6 +49,8 @@ static inline void *kmap_coherent(struct page *page, unsigned long addr) update_mmu_cache(NULL, vaddr, pte); + set_pte(kmap_coherent_pte - (FIX_CMAP_END - idx), pte); + return (void *)vaddr; } -- cgit v1.2.3-70-g09d2 From 8a8bc22332ee6ea49137508467a76aa7f4367719 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 10 Nov 2008 14:48:21 +0900 Subject: libata: revert convert-to-block-tagging patches This patch reverts the following three commits which convert libata to use block layer tagging. 43a49cbdf31e812c0d8f553d433b09b421f5d52c e013e13bf605b9e6b702adffbe2853cfc60e7806 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e Although using block layer tagging is the right direction, due to the tight coupling among tag number, data structure allocation and hardware command slot allocation, libata doesn't work correctly with the current conversion. The biggest problem is guaranteeing that tag 0 is always used for non-NCQ commands. Due to the way blk-tag is implemented and how SCSI starts and finishes requests, such guarantee can't be made. I'm not sure whether this would actually break any low level driver but it doesn't look like a good idea to break such assumption given the frailty of ATA controllers. So, for the time being, keep using the old dumb in-libata qc allocation. Signed-off-by: Tejun Heo Cc: Jens Axobe Cc: Jeff Garzik Signed-off-by: Linus Torvalds --- drivers/ata/libata-core.c | 66 ++++++++++++++++++++++++++++++++++++++++++----- drivers/ata/libata-scsi.c | 23 ++--------------- drivers/ata/libata.h | 19 ++------------ include/linux/libata.h | 1 + 4 files changed, 65 insertions(+), 44 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 622350d9b2e..0cd3ad49713 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1712,6 +1712,8 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, else tag = 0; + if (test_and_set_bit(tag, &ap->qc_allocated)) + BUG(); qc = __ata_qc_from_tag(ap, tag); qc->tag = tag; @@ -4562,6 +4564,37 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) #endif /* __BIG_ENDIAN */ } +/** + * ata_qc_new - Request an available ATA command, for queueing + * @ap: Port associated with device @dev + * @dev: Device from whom we request an available command structure + * + * LOCKING: + * None. + */ + +static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) +{ + struct ata_queued_cmd *qc = NULL; + unsigned int i; + + /* no command while frozen */ + if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) + return NULL; + + /* the last tag is reserved for internal command. */ + for (i = 0; i < ATA_MAX_QUEUE - 1; i++) + if (!test_and_set_bit(i, &ap->qc_allocated)) { + qc = __ata_qc_from_tag(ap, i); + break; + } + + if (qc) + qc->tag = i; + + return qc; +} + /** * ata_qc_new_init - Request an available ATA command, and initialize it * @dev: Device from whom we request an available command structure @@ -4571,20 +4604,16 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) * None. */ -struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag) +struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) { struct ata_port *ap = dev->link->ap; struct ata_queued_cmd *qc; - if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) - return NULL; - - qc = __ata_qc_from_tag(ap, tag); + qc = ata_qc_new(ap); if (qc) { qc->scsicmd = NULL; qc->ap = ap; qc->dev = dev; - qc->tag = tag; ata_qc_reinit(qc); } @@ -4592,6 +4621,31 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag) return qc; } +/** + * ata_qc_free - free unused ata_queued_cmd + * @qc: Command to complete + * + * Designed to free unused ata_queued_cmd object + * in case something prevents using it. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_qc_free(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int tag; + + WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + + qc->flags = 0; + tag = qc->tag; + if (likely(ata_tag_valid(tag))) { + qc->tag = ATA_TAG_POISON; + clear_bit(tag, &ap->qc_allocated); + } +} + void __ata_qc_complete(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 3fa75eac135..47c7afcb36f 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -709,11 +709,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, { struct ata_queued_cmd *qc; - if (cmd->request->tag != -1) - qc = ata_qc_new_init(dev, cmd->request->tag); - else - qc = ata_qc_new_init(dev, 0); - + qc = ata_qc_new_init(dev); if (qc) { qc->scsicmd = cmd; qc->scsidone = done; @@ -1108,17 +1104,7 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); depth = min(ATA_MAX_QUEUE - 1, depth); - - /* - * If this device is behind a port multiplier, we have - * to share the tag map between all devices on that PMP. - * Set up the shared tag map here and we get automatic. - */ - if (dev->link->ap->pmp_link) - scsi_init_shared_tag_map(sdev->host, ATA_MAX_QUEUE - 1); - - scsi_set_tag_type(sdev, MSG_SIMPLE_TAG); - scsi_activate_tcq(sdev, depth); + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth); } return 0; @@ -1958,11 +1944,6 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf) hdr[1] |= (1 << 7); memcpy(rbuf, hdr, sizeof(hdr)); - - /* if ncq, set tags supported */ - if (ata_id_has_ncq(args->id)) - rbuf[7] |= (1 << 1); - memcpy(&rbuf[8], "ATA ", 8); ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16); ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4); diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index d3831d39bda..fe2839e5877 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -74,7 +74,7 @@ extern struct ata_link *ata_dev_phys_link(struct ata_device *dev); extern void ata_force_cbl(struct ata_port *ap); extern u64 ata_tf_to_lba(const struct ata_taskfile *tf); extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf); -extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag); +extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, unsigned int tag); @@ -103,6 +103,7 @@ extern int ata_dev_configure(struct ata_device *dev); extern int sata_down_spd_limit(struct ata_link *link); extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); extern void ata_sg_clean(struct ata_queued_cmd *qc); +extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); extern void __ata_qc_complete(struct ata_queued_cmd *qc); extern int atapi_check_dma(struct ata_queued_cmd *qc); @@ -118,22 +119,6 @@ extern struct ata_port *ata_port_alloc(struct ata_host *host); extern void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy); extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm); -/** - * ata_qc_free - free unused ata_queued_cmd - * @qc: Command to complete - * - * Designed to free unused ata_queued_cmd object - * in case something prevents using it. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -static inline void ata_qc_free(struct ata_queued_cmd *qc) -{ - qc->flags = 0; - qc->tag = ATA_TAG_POISON; -} - /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI extern void ata_acpi_associate_sata_port(struct ata_port *ap); diff --git a/include/linux/libata.h b/include/linux/libata.h index c7665a4134c..59b0f1c807b 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -698,6 +698,7 @@ struct ata_port { unsigned int cbl; /* cable type; ATA_CBL_xxx */ struct ata_queued_cmd qcmd[ATA_MAX_QUEUE]; + unsigned long qc_allocated; unsigned int qc_active; int nr_active_links; /* #links with active qcs */ -- cgit v1.2.3-70-g09d2 From 1de5b0854623d30d01d72cd4ea323eb5f39d1f16 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sun, 2 Nov 2008 16:04:18 +0000 Subject: x86: HPET: convert WARN_ON to WARN_ON_ONCE It is possible to flood the console with call traces if the WARN_ON condition is true because of the frequency with which this function is called. Signed-off-by: Matt Fleming Cc: mingo@elte.hu Cc: venkatesh.pallipadi@intel.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/hpet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 77017e834cf..f10f9461a43 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -322,7 +322,7 @@ static int hpet_next_event(unsigned long delta, * what we wrote hit the chip before we compare it to the * counter. */ - WARN_ON((u32)hpet_readl(HPET_T0_CMP) != cnt); + WARN_ON_ONCE((u32)hpet_readl(HPET_T0_CMP) != cnt); return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0; } -- cgit v1.2.3-70-g09d2 From 89d77a1eb60be916d85d9394bedbfa2037af89c5 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sun, 2 Nov 2008 16:04:20 +0000 Subject: x86: HPET: read from HPET_Tn_CMP() not HPET_T0_CMP In hpet_next_event() we check that the value we just wrote to HPET_Tn_CMP(timer) has reached the chip. Currently, we're checking that the value we wrote to HPET_Tn_CMP(timer) is in HPET_T0_CMP, which, if timer is anything other than timer 0, is likely to fail. Signed-off-by: Matt Fleming Cc: mingo@elte.hu Cc: venkatesh.pallipadi@intel.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/hpet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index f10f9461a43..cfe6aa56f71 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -322,7 +322,7 @@ static int hpet_next_event(unsigned long delta, * what we wrote hit the chip before we compare it to the * counter. */ - WARN_ON_ONCE((u32)hpet_readl(HPET_T0_CMP) != cnt); + WARN_ON_ONCE((u32)hpet_readl(HPET_Tn_CMP(timer)) != cnt); return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0; } -- cgit v1.2.3-70-g09d2 From 5ceb1a04187553e08c6ab60d30cee7c454ee139a Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sun, 2 Nov 2008 22:23:13 +0000 Subject: x86: HPET: enter hpet_interrupt_handler with interrupts disabled Some functions that may be called from this handler require that interrupts are disabled. Also, combining IRQF_DISABLED and IRQF_SHARED does not reliably disable interrupts in a handler, so remove IRQF_SHARED from the irq flags (this irq is not shared anyway). Signed-off-by: Matt Fleming Cc: mingo@elte.hu Cc: venkatesh.pallipadi@intel.com Cc: "Will Newton" Signed-off-by: Thomas Gleixner --- arch/x86/kernel/hpet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index cfe6aa56f71..067d8de913f 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -445,7 +445,7 @@ static int hpet_setup_irq(struct hpet_dev *dev) { if (request_irq(dev->irq, hpet_interrupt_handler, - IRQF_SHARED|IRQF_NOBALANCING, dev->name, dev)) + IRQF_DISABLED|IRQF_NOBALANCING, dev->name, dev)) return -1; disable_irq(dev->irq); -- cgit v1.2.3-70-g09d2 From 254248313aed7e6ff295ca21a82ca989b1f69c16 Mon Sep 17 00:00:00 2001 From: Travis Place Date: Mon, 10 Nov 2008 17:56:23 +0100 Subject: ALSA: hda - Make the HP EliteBook 8530p use AD1884A model laptop Added a QUIRK to patch_analog.c for the HP Elitebook 8530p (IDs 0x103c:0x30e7) to use AD1884A model 'laptop' by default. Playback and Capture confirmed working. Signed-off-by: Travis Place Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 400df85a445..686c77491de 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3861,6 +3861,7 @@ static const char *ad1884a_models[AD1884A_MODELS] = { static struct snd_pci_quirk ad1884a_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x3030, "HP", AD1884A_MOBILE), SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE), + SND_PCI_QUIRK(0x103c, 0x30e7, "HP EliteBook 8530p", AD1884A_LAPTOP), SND_PCI_QUIRK(0x103c, 0x3614, "HP 6730s", AD1884A_LAPTOP), SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD), {} -- cgit v1.2.3-70-g09d2 From c3cb6827353102fee62f3b9401a03ee29b297e5b Mon Sep 17 00:00:00 2001 From: Tiger Yang Date: Thu, 23 Oct 2008 16:33:03 +0800 Subject: ocfs2: fix license in xattr This patch fixes the license in xattr.c and xattr.h. Signed-off-by: Tiger Yang Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 13 ++++--------- fs/ocfs2/xattr.h | 12 ++---------- 2 files changed, 6 insertions(+), 19 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 802c4149221..2f8952e4e4c 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -3,25 +3,20 @@ * * xattr.c * - * Copyright (C) 2008 Oracle. All rights reserved. + * Copyright (C) 2004, 2008 Oracle. All rights reserved. * * CREDITS: - * Lots of code in this file is taken from ext3. + * Lots of code in this file is copy from linux/fs/ext3/xattr.c. + * Copyright (C) 2001-2003 Andreas Gruenbacher, * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public - * License as published by the Free Software Foundation; either - * version 2 of the License, or (at your option) any later version. + * License version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the - * Free Software Foundation, Inc., 59 Temple Place - Suite 330, - * Boston, MA 021110-1307, USA. */ #include diff --git a/fs/ocfs2/xattr.h b/fs/ocfs2/xattr.h index c25c7c62a05..e4e45c81a26 100644 --- a/fs/ocfs2/xattr.h +++ b/fs/ocfs2/xattr.h @@ -3,24 +3,16 @@ * * xattr.h * - * Function prototypes - * - * Copyright (C) 2008 Oracle. All rights reserved. + * Copyright (C) 2004, 2008 Oracle. All rights reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public - * License as published by the Free Software Foundation; either - * version 2 of the License, or (at your option) any later version. + * License version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the - * Free Software Foundation, Inc., 59 Temple Place - Suite 330, - * Boston, MA 021110-1307, USA. */ #ifndef OCFS2_XATTR_H -- cgit v1.2.3-70-g09d2 From 0030e001505d2d1503c083c917a747c033eaf8cd Mon Sep 17 00:00:00 2001 From: Tiger Yang Date: Thu, 23 Oct 2008 16:33:33 +0800 Subject: ocfs2: fix function declaration and definition in xattr Because we merged the xattr sources into one file, some functions no longer belong in the header file. Signed-off-by: Tiger Yang Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 28 +++++++++++++++++++++++----- fs/ocfs2/xattr.h | 26 ++++---------------------- 2 files changed, 27 insertions(+), 27 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 2f8952e4e4c..420d8e30b18 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -132,6 +132,24 @@ static int ocfs2_xattr_set_entry_index_block(struct inode *inode, static int ocfs2_delete_xattr_index_block(struct inode *inode, struct buffer_head *xb_bh); +static inline u16 ocfs2_xattr_buckets_per_cluster(struct ocfs2_super *osb) +{ + return (1 << osb->s_clustersize_bits) / OCFS2_XATTR_BUCKET_SIZE; +} + +static inline u16 ocfs2_blocks_per_xattr_bucket(struct super_block *sb) +{ + return OCFS2_XATTR_BUCKET_SIZE / (1 << sb->s_blocksize_bits); +} + +static inline u16 ocfs2_xattr_max_xe_in_bucket(struct super_block *sb) +{ + u16 len = sb->s_blocksize - + offsetof(struct ocfs2_xattr_header, xh_entries); + + return len / sizeof(struct ocfs2_xattr_entry); +} + static inline const char *ocfs2_xattr_prefix(int name_index) { struct xattr_handler *handler = NULL; @@ -832,11 +850,11 @@ cleanup: * Copy an extended attribute into the buffer provided. * Buffer is NULL to compute the size of buffer required. */ -int ocfs2_xattr_get(struct inode *inode, - int name_index, - const char *name, - void *buffer, - size_t buffer_size) +static int ocfs2_xattr_get(struct inode *inode, + int name_index, + const char *name, + void *buffer, + size_t buffer_size) { int ret; struct ocfs2_dinode *di = NULL; diff --git a/fs/ocfs2/xattr.h b/fs/ocfs2/xattr.h index e4e45c81a26..1d8314c7656 100644 --- a/fs/ocfs2/xattr.h +++ b/fs/ocfs2/xattr.h @@ -32,29 +32,11 @@ enum ocfs2_xattr_type { extern struct xattr_handler ocfs2_xattr_user_handler; extern struct xattr_handler ocfs2_xattr_trusted_handler; - -extern ssize_t ocfs2_listxattr(struct dentry *, char *, size_t); -extern int ocfs2_xattr_get(struct inode *, int, const char *, void *, size_t); -extern int ocfs2_xattr_set(struct inode *, int, const char *, const void *, - size_t, int); -extern int ocfs2_xattr_remove(struct inode *inode, struct buffer_head *di_bh); extern struct xattr_handler *ocfs2_xattr_handlers[]; -static inline u16 ocfs2_xattr_buckets_per_cluster(struct ocfs2_super *osb) -{ - return (1 << osb->s_clustersize_bits) / OCFS2_XATTR_BUCKET_SIZE; -} - -static inline u16 ocfs2_blocks_per_xattr_bucket(struct super_block *sb) -{ - return OCFS2_XATTR_BUCKET_SIZE / (1 << sb->s_blocksize_bits); -} - -static inline u16 ocfs2_xattr_max_xe_in_bucket(struct super_block *sb) -{ - u16 len = sb->s_blocksize - - offsetof(struct ocfs2_xattr_header, xh_entries); +ssize_t ocfs2_listxattr(struct dentry *, char *, size_t); +int ocfs2_xattr_set(struct inode *, int, const char *, const void *, + size_t, int); +int ocfs2_xattr_remove(struct inode *, struct buffer_head *); - return len / sizeof(struct ocfs2_xattr_entry); -} #endif /* OCFS2_XATTR_H */ -- cgit v1.2.3-70-g09d2 From ceb1eba3dc2ad94b25764785ff7d2082c6094115 Mon Sep 17 00:00:00 2001 From: Tiger Yang Date: Thu, 23 Oct 2008 16:34:13 +0800 Subject: ocfs2: remove duplicate definition in xattr Include/linux/xattr.h already has the definition about xattr prefix, so remove the duplicate definitions in xattr.c. Signed-off-by: Tiger Yang Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 420d8e30b18..a9da45bbb9e 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -4740,14 +4740,11 @@ out: /* * 'trusted' attributes support */ - -#define XATTR_TRUSTED_PREFIX "trusted." - static size_t ocfs2_xattr_trusted_list(struct inode *inode, char *list, size_t list_size, const char *name, size_t name_len) { - const size_t prefix_len = sizeof(XATTR_TRUSTED_PREFIX) - 1; + const size_t prefix_len = XATTR_TRUSTED_PREFIX_LEN; const size_t total_len = prefix_len + name_len + 1; if (list && total_len <= list_size) { @@ -4784,18 +4781,14 @@ struct xattr_handler ocfs2_xattr_trusted_handler = { .set = ocfs2_xattr_trusted_set, }; - /* * 'user' attributes support */ - -#define XATTR_USER_PREFIX "user." - static size_t ocfs2_xattr_user_list(struct inode *inode, char *list, size_t list_size, const char *name, size_t name_len) { - const size_t prefix_len = sizeof(XATTR_USER_PREFIX) - 1; + const size_t prefix_len = XATTR_USER_PREFIX_LEN; const size_t total_len = prefix_len + name_len + 1; struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); -- cgit v1.2.3-70-g09d2 From c988fd045f1195e62c0970384903ab9da26a9359 Mon Sep 17 00:00:00 2001 From: Tiger Yang Date: Thu, 23 Oct 2008 16:34:44 +0800 Subject: ocfs2: add handler_map array bounds checking Make the handler_map array as large as the possible value range to avoid a fencepost error. [ Utilize alternate method -- Joel ] Signed-off-by: Tiger Yang Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index a9da45bbb9e..e19980a71a3 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -78,7 +78,7 @@ struct xattr_handler *ocfs2_xattr_handlers[] = { NULL }; -static struct xattr_handler *ocfs2_xattr_handler_map[] = { +static struct xattr_handler *ocfs2_xattr_handler_map[OCFS2_XATTR_MAX] = { [OCFS2_XATTR_INDEX_USER] = &ocfs2_xattr_user_handler, [OCFS2_XATTR_INDEX_TRUSTED] = &ocfs2_xattr_trusted_handler, }; -- cgit v1.2.3-70-g09d2 From f6087fb799e097e7c9d912daa75701de9d62dc53 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Mon, 20 Oct 2008 18:20:43 -0700 Subject: ocfs2: Check xattr block signatures properly. The xattr.c code is currently memcmp()ing naking buffer pointers. Create the OCFS2_IS_VALID_XATTR_BLOCK() macro to match its peers and use that. In addition, failed signature checks were returning -EFAULT, which is completely wrong. Return -EIO. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/ocfs2.h | 3 +++ fs/ocfs2/xattr.c | 38 ++++++++++++++++---------------------- 2 files changed, 19 insertions(+), 22 deletions(-) diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index a21a465490c..fef7ece3237 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -473,6 +473,9 @@ static inline int ocfs2_uses_extended_slot_map(struct ocfs2_super *osb) (____gd)->bg_signature); \ } while (0) +#define OCFS2_IS_VALID_XATTR_BLOCK(ptr) \ + (!strcmp((ptr)->xb_signature, OCFS2_XATTR_BLOCK_SIGNATURE)) + static inline unsigned long ino_from_blkno(struct super_block *sb, u64 blkno) { diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index e19980a71a3..151ba6257fb 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -555,14 +555,12 @@ static int ocfs2_xattr_block_list(struct inode *inode, mlog_errno(ret); return ret; } - /*Verify the signature of xattr block*/ - if (memcmp((void *)blk_bh->b_data, OCFS2_XATTR_BLOCK_SIGNATURE, - strlen(OCFS2_XATTR_BLOCK_SIGNATURE))) { - ret = -EFAULT; - goto cleanup; - } xb = (struct ocfs2_xattr_block *)blk_bh->b_data; + if (!OCFS2_IS_VALID_XATTR_BLOCK(xb)) { + ret = -EIO; + goto cleanup; + } if (!(le16_to_cpu(xb->xb_flags) & OCFS2_XATTR_INDEXED)) { struct ocfs2_xattr_header *header = &xb->xb_attrs.xb_header; @@ -779,15 +777,14 @@ static int ocfs2_xattr_block_get(struct inode *inode, mlog_errno(ret); return ret; } - /*Verify the signature of xattr block*/ - if (memcmp((void *)blk_bh->b_data, OCFS2_XATTR_BLOCK_SIGNATURE, - strlen(OCFS2_XATTR_BLOCK_SIGNATURE))) { - ret = -EFAULT; + + xb = (struct ocfs2_xattr_block *)blk_bh->b_data; + if (!OCFS2_IS_VALID_XATTR_BLOCK(xb)) { + ret = -EIO; goto cleanup; } xs->xattr_bh = blk_bh; - xb = (struct ocfs2_xattr_block *)blk_bh->b_data; if (!(le16_to_cpu(xb->xb_flags) & OCFS2_XATTR_INDEXED)) { xs->header = &xb->xb_attrs.xb_header; @@ -1527,10 +1524,9 @@ static int ocfs2_xattr_free_block(struct inode *inode, goto out; } - /*Verify the signature of xattr block*/ - if (memcmp((void *)blk_bh->b_data, OCFS2_XATTR_BLOCK_SIGNATURE, - strlen(OCFS2_XATTR_BLOCK_SIGNATURE))) { - ret = -EFAULT; + xb = (struct ocfs2_xattr_block *)blk_bh->b_data; + if (!OCFS2_IS_VALID_XATTR_BLOCK(xb)) { + ret = -EIO; goto out; } @@ -1540,7 +1536,6 @@ static int ocfs2_xattr_free_block(struct inode *inode, goto out; } - xb = (struct ocfs2_xattr_block *)blk_bh->b_data; blk = le64_to_cpu(xb->xb_blkno); bit = le16_to_cpu(xb->xb_suballoc_bit); bg_blkno = ocfs2_which_suballoc_group(blk, bit); @@ -1784,15 +1779,14 @@ static int ocfs2_xattr_block_find(struct inode *inode, mlog_errno(ret); return ret; } - /*Verify the signature of xattr block*/ - if (memcmp((void *)blk_bh->b_data, OCFS2_XATTR_BLOCK_SIGNATURE, - strlen(OCFS2_XATTR_BLOCK_SIGNATURE))) { - ret = -EFAULT; - goto cleanup; + + xb = (struct ocfs2_xattr_block *)blk_bh->b_data; + if (!OCFS2_IS_VALID_XATTR_BLOCK(xb)) { + ret = -EIO; + goto cleanup; } xs->xattr_bh = blk_bh; - xb = (struct ocfs2_xattr_block *)blk_bh->b_data; if (!(le16_to_cpu(xb->xb_flags) & OCFS2_XATTR_INDEXED)) { xs->header = &xb->xb_attrs.xb_header; -- cgit v1.2.3-70-g09d2 From b37c4d84e9d16fd5b6f31197f02ea0a112fc9e99 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Mon, 20 Oct 2008 18:24:03 -0700 Subject: ocfs2: Don't return -EFAULT from a corrupt xattr entry. If the xattr disk structures are corrupt, return -EIO, not -EFAULT. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 151ba6257fb..41a6ca004ae 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -1239,7 +1239,7 @@ static int ocfs2_xattr_set_entry(struct inode *inode, free = min_offs - ((void *)last - xs->base) - sizeof(__u32); if (free < 0) - return -EFAULT; + return -EIO; if (!xs->not_found) { size_t size = 0; -- cgit v1.2.3-70-g09d2 From bd60bd37ade4321ecce4ed4442f68c88febd76d5 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Mon, 20 Oct 2008 18:25:56 -0700 Subject: ocfs2: Check errors from ocfs2_xattr_update_xattr_search() The ocfs2_xattr_update_xattr_search() function can return an error when trying to read blocks off of disk. The caller needs to check this error before using those (possibly invalid) blocks. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 41a6ca004ae..92df88a41e5 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -2825,7 +2825,11 @@ static int ocfs2_xattr_create_index_block(struct inode *inode, if (data_bh) ocfs2_journal_dirty(handle, data_bh); - ocfs2_xattr_update_xattr_search(inode, xs, xb_bh, xh_bh); + ret = ocfs2_xattr_update_xattr_search(inode, xs, xb_bh, xh_bh); + if (ret) { + mlog_errno(ret); + goto out_commit; + } /* Change from ocfs2_xattr_header to ocfs2_xattr_tree_root */ memset(&xb->xb_attrs, 0, inode->i_sb->s_blocksize - -- cgit v1.2.3-70-g09d2 From eb6ff2397d1fdfc6a7629c99896338e5b5c508e5 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Mon, 20 Oct 2008 18:32:48 -0700 Subject: ocfs2: Specify appropriate journal access for new xattr buckets. There are a couple places that get an xattr bucket that may be reading an existing one or may be allocating a new one. They should specify the correct journal access mode depending. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 92df88a41e5..fb450200bc8 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -3231,7 +3231,9 @@ static int ocfs2_half_xattr_bucket(struct inode *inode, for (i = 0; i < blk_per_bucket; i++) { ret = ocfs2_journal_access(handle, inode, t_bhs[i], - OCFS2_JOURNAL_ACCESS_CREATE); + new_bucket_head ? + OCFS2_JOURNAL_ACCESS_CREATE : + OCFS2_JOURNAL_ACCESS_WRITE); if (ret) { mlog_errno(ret); goto out; @@ -3393,6 +3395,8 @@ static int ocfs2_cp_xattr_bucket(struct inode *inode, for (i = 0; i < blk_per_bucket; i++) { ret = ocfs2_journal_access(handle, inode, t_bhs[i], + t_is_new ? + OCFS2_JOURNAL_ACCESS_CREATE : OCFS2_JOURNAL_ACCESS_WRITE); if (ret) goto out; -- cgit v1.2.3-70-g09d2 From 54f443f4e7265a1333886dbace31cb6eb1991c72 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Mon, 20 Oct 2008 18:43:07 -0700 Subject: ocfs2: Don't repeat ocfs2_xattr_block_find() ocfs2_xattr_block_get() looks up the xattr in a startlingly familiar way; it's identical to the function ocfs2_xattr_block_find(). Let's just use the later in the former. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 39 +++++++++------------------------------ 1 file changed, 9 insertions(+), 30 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index fb450200bc8..74d1faba23b 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -111,6 +111,10 @@ static int ocfs2_xattr_bucket_get_name_value(struct inode *inode, int *block_off, int *new_offset); +static int ocfs2_xattr_block_find(struct inode *inode, + int name_index, + const char *name, + struct ocfs2_xattr_search *xs); static int ocfs2_xattr_index_block_find(struct inode *inode, struct buffer_head *root_bh, int name_index, @@ -760,46 +764,20 @@ static int ocfs2_xattr_block_get(struct inode *inode, size_t buffer_size, struct ocfs2_xattr_search *xs) { - struct ocfs2_dinode *di = (struct ocfs2_dinode *)xs->inode_bh->b_data; - struct buffer_head *blk_bh = NULL; struct ocfs2_xattr_block *xb; struct ocfs2_xattr_value_root *xv; size_t size; int ret = -ENODATA, name_offset, name_len, block_off, i; - if (!di->i_xattr_loc) - return ret; - memset(&xs->bucket, 0, sizeof(xs->bucket)); - ret = ocfs2_read_block(inode, le64_to_cpu(di->i_xattr_loc), &blk_bh); - if (ret < 0) { + ret = ocfs2_xattr_block_find(inode, name_index, name, xs); + if (ret) { mlog_errno(ret); - return ret; - } - - xb = (struct ocfs2_xattr_block *)blk_bh->b_data; - if (!OCFS2_IS_VALID_XATTR_BLOCK(xb)) { - ret = -EIO; goto cleanup; } - xs->xattr_bh = blk_bh; - - if (!(le16_to_cpu(xb->xb_flags) & OCFS2_XATTR_INDEXED)) { - xs->header = &xb->xb_attrs.xb_header; - xs->base = (void *)xs->header; - xs->end = (void *)(blk_bh->b_data) + blk_bh->b_size; - xs->here = xs->header->xh_entries; - - ret = ocfs2_xattr_find_entry(name_index, name, xs); - } else - ret = ocfs2_xattr_index_block_find(inode, blk_bh, - name_index, - name, xs); - - if (ret) - goto cleanup; + xb = (struct ocfs2_xattr_block *)xs->xattr_bh->b_data; size = le64_to_cpu(xs->here->xe_value_size); if (buffer) { ret = -ERANGE; @@ -838,7 +816,8 @@ cleanup: brelse(xs->bucket.bhs[i]); memset(&xs->bucket, 0, sizeof(xs->bucket)); - brelse(blk_bh); + brelse(xs->xattr_bh); + xs->xattr_bh = NULL; return ret; } -- cgit v1.2.3-70-g09d2 From 63fd77573723841d5d44a79471258f1b261f4482 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Fri, 17 Oct 2008 12:44:36 +0800 Subject: ocfs2: Remove unused ocfs2_restore_xattr_block(). Since now ocfs2 supports empty xattr buckets, we will never remove the xattr index tree even if all the xattrs are removed, so this function will never be called. So remove it. Signed-off-by: Tao Ma Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 48 ------------------------------------------------ 1 file changed, 48 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 74d1faba23b..789fb70462c 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -1791,52 +1791,6 @@ cleanup: return ret; } -/* - * When all the xattrs are deleted from index btree, the ocfs2_xattr_tree - * will be erased and ocfs2_xattr_block will have its ocfs2_xattr_header - * re-initialized. - */ -static int ocfs2_restore_xattr_block(struct inode *inode, - struct ocfs2_xattr_search *xs) -{ - int ret; - handle_t *handle; - struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); - struct ocfs2_xattr_block *xb = - (struct ocfs2_xattr_block *)xs->xattr_bh->b_data; - struct ocfs2_extent_list *el = &xb->xb_attrs.xb_root.xt_list; - u16 xb_flags = le16_to_cpu(xb->xb_flags); - - BUG_ON(!(xb_flags & OCFS2_XATTR_INDEXED) || - le16_to_cpu(el->l_next_free_rec) != 0); - - handle = ocfs2_start_trans(osb, OCFS2_XATTR_BLOCK_UPDATE_CREDITS); - if (IS_ERR(handle)) { - ret = PTR_ERR(handle); - handle = NULL; - goto out; - } - - ret = ocfs2_journal_access(handle, inode, xs->xattr_bh, - OCFS2_JOURNAL_ACCESS_WRITE); - if (ret < 0) { - mlog_errno(ret); - goto out_commit; - } - - memset(&xb->xb_attrs, 0, inode->i_sb->s_blocksize - - offsetof(struct ocfs2_xattr_block, xb_attrs)); - - xb->xb_flags = cpu_to_le16(xb_flags & ~OCFS2_XATTR_INDEXED); - - ocfs2_journal_dirty(handle, xs->xattr_bh); - -out_commit: - ocfs2_commit_trans(osb, handle); -out: - return ret; -} - /* * ocfs2_xattr_block_set() * @@ -1947,8 +1901,6 @@ out: } ret = ocfs2_xattr_set_entry_index_block(inode, xi, xs); - if (!ret && xblk->xb_attrs.xb_root.xt_list.l_next_free_rec == 0) - ret = ocfs2_restore_xattr_block(inode, xs); end: -- cgit v1.2.3-70-g09d2 From 8573f79d30077875e2b6e83849b5245bfbb08685 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Fri, 24 Oct 2008 22:24:17 +0800 Subject: ocfs2: Fix some typos in xattr annotations. Fix some typos in the xattr annotations. Signed-off-by: Tao Ma Reported-by: Coly Li Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/ocfs2_fs.h | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index f24ce3d3f95..5f180cf7abb 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -742,12 +742,12 @@ struct ocfs2_group_desc */ struct ocfs2_xattr_entry { __le32 xe_name_hash; /* hash value of xattr prefix+suffix. */ - __le16 xe_name_offset; /* byte offset from the 1st etnry in the local + __le16 xe_name_offset; /* byte offset from the 1st entry in the local xattr storage(inode, xattr block or xattr bucket). */ __u8 xe_name_len; /* xattr name len, does't include prefix. */ - __u8 xe_type; /* the low 7 bits indicates the name prefix's - * type and the highest 1 bits indicate whether + __u8 xe_type; /* the low 7 bits indicate the name prefix + * type and the highest bit indicates whether * the EA is stored in the local storage. */ __le64 xe_value_size; /* real xattr value length. */ }; @@ -766,9 +766,10 @@ struct ocfs2_xattr_header { xattr. */ __le16 xh_name_value_len; /* total length of name/value length in this bucket. */ - __le16 xh_num_buckets; /* bucket nums in one extent - record, only valid in the - first bucket. */ + __le16 xh_num_buckets; /* Number of xattr buckets + in this extent record, + only valid in the first + bucket. */ __le64 xh_csum; struct ocfs2_xattr_entry xh_entries[0]; /* xattr entry list. */ }; @@ -776,8 +777,8 @@ struct ocfs2_xattr_header { /* * On disk structure for xattr value root. * - * It is used when one extended attribute's size is larger, and we will save it - * in an outside cluster. It will stored in a b-tree like file content. + * When an xattr's value is large enough, it is stored in an external + * b-tree like file data. The xattr value root points to this structure. */ struct ocfs2_xattr_value_root { /*00*/ __le32 xr_clusters; /* clusters covered by xattr value. */ -- cgit v1.2.3-70-g09d2 From fa38e92cb34e27e60d0faf1035934eb9b44aa1d4 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 20 Oct 2008 19:23:51 +0200 Subject: ocfs2: Fix check of return value of ocfs2_start_trans() On failure, ocfs2_start_trans() returns values like ERR_PTR(-ENOMEM). Thus checks for !handle are wrong. Fix them to use IS_ERR(). Signed-off-by: Jan Kara Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/file.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 7efe937a415..3138a385fdb 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -247,8 +247,8 @@ int ocfs2_update_inode_atime(struct inode *inode, mlog_entry_void(); handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); - if (handle == NULL) { - ret = -ENOMEM; + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); mlog_errno(ret); goto out; } @@ -312,8 +312,8 @@ static int ocfs2_simple_size_update(struct inode *inode, handle_t *handle = NULL; handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); - if (handle == NULL) { - ret = -ENOMEM; + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); mlog_errno(ret); goto out; } @@ -1055,8 +1055,8 @@ static int __ocfs2_write_remove_suid(struct inode *inode, (unsigned long long)OCFS2_I(inode)->ip_blkno, inode->i_mode); handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); - if (handle == NULL) { - ret = -ENOMEM; + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); mlog_errno(ret); goto out; } @@ -1259,8 +1259,8 @@ static int __ocfs2_remove_inode_range(struct inode *inode, } handle = ocfs2_start_trans(osb, OCFS2_REMOVE_EXTENT_CREDITS); - if (handle == NULL) { - ret = -ENOMEM; + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); mlog_errno(ret); goto out; } @@ -1352,8 +1352,8 @@ static int ocfs2_zero_partial_clusters(struct inode *inode, goto out; handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); - if (handle == NULL) { - ret = -ENOMEM; + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); mlog_errno(ret); goto out; } -- cgit v1.2.3-70-g09d2 From 87cfa004321c62aec681713ea48e0b846336d9f4 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 20 Oct 2008 19:23:53 +0200 Subject: ocfs2: Fix checking of return value of new_inode() new_inode() does not return ERR_PTR() but NULL in case of failure. Correct checking of the return value. Signed-off-by: Jan Kara Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/namei.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index 485a6aa0ad3..f594f300d4c 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -378,8 +378,8 @@ static int ocfs2_mknod_locked(struct ocfs2_super *osb, } inode = new_inode(dir->i_sb); - if (IS_ERR(inode)) { - status = PTR_ERR(inode); + if (!inode) { + status = -ENOMEM; mlog(ML_ERROR, "new_inode failed!\n"); goto leave; } -- cgit v1.2.3-70-g09d2 From b99835c1684918b9975851d71455c5c007d1715b Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 20 Oct 2008 19:23:54 +0200 Subject: ocfs2: Let inode be really deleted when ocfs2_mknod_locked() fails We forgot to set i_nlink to 0 when returning due to error from ocfs2_mknod_locked() and thus inode was not properly released via ocfs2_delete_inode() (e.g. claimed space was not released). Fix it. Signed-off-by: Jan Kara Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/namei.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c index f594f300d4c..f4967e634ff 100644 --- a/fs/ocfs2/namei.c +++ b/fs/ocfs2/namei.c @@ -491,8 +491,10 @@ leave: brelse(*new_fe_bh); *new_fe_bh = NULL; } - if (inode) + if (inode) { + clear_nlink(inode); iput(inode); + } } mlog_exit(status); -- cgit v1.2.3-70-g09d2 From d32647993c211901fc4819ef3327f62d1859241b Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Fri, 24 Oct 2008 07:57:28 +0800 Subject: ocfs2: Fix check of return value of ocfs2_start_trans() in xattr.c. On failure, ocfs2_start_trans() returns values like ERR_PTR(-ENOMEM), so we should check whether handle is NULL. Fix them to use IS_ERR(). Jan has made the patch for other part in ocfs2(thank Jan for it), so this is just the fix for fs/ocfs2/xattr.c. Signed-off-by: Tao Ma Cc: Jan Kara Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 789fb70462c..a371c01942b 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -4092,7 +4092,7 @@ static int ocfs2_xattr_value_update_size(struct inode *inode, handle_t *handle = NULL; handle = ocfs2_start_trans(osb, 1); - if (handle == NULL) { + if (IS_ERR(handle)) { ret = -ENOMEM; mlog_errno(ret); goto out; @@ -4259,7 +4259,7 @@ static int ocfs2_rm_xattr_cluster(struct inode *inode, } handle = ocfs2_start_trans(osb, OCFS2_REMOVE_EXTENT_CREDITS); - if (handle == NULL) { + if (IS_ERR(handle)) { ret = -ENOMEM; mlog_errno(ret); goto out; -- cgit v1.2.3-70-g09d2 From ae0dff683076b2798763288c7ac2f09a18c4a998 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Wed, 22 Oct 2008 13:24:29 -0700 Subject: ocfs2: Set journal descriptor to NULL after journal shutdown Patch sets journal descriptor to NULL after the journal is shutdown. This ensures that jbd2_journal_release_jbd_inode(), which removes the jbd2 inode from txn lists, can be called safely from ocfs2_clear_inode() even after the journal has been shutdown. Signed-off-by: Sunil Mushran Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/inode.c | 6 ++++++ fs/ocfs2/journal.c | 1 + 2 files changed, 7 insertions(+) diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c index 4903688f72a..7aa00d51187 100644 --- a/fs/ocfs2/inode.c +++ b/fs/ocfs2/inode.c @@ -1106,6 +1106,12 @@ void ocfs2_clear_inode(struct inode *inode) oi->ip_last_trans = 0; oi->ip_dir_start_lookup = 0; oi->ip_blkno = 0ULL; + + /* + * ip_jinode is used to track txns against this inode. We ensure that + * the journal is flushed before journal shutdown. Thus it is safe to + * have inodes get cleaned up after journal shutdown. + */ jbd2_journal_release_jbd_inode(OCFS2_SB(inode->i_sb)->journal->j_journal, &oi->ip_jinode); diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index 81e40677eec..99fe9d584f3 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -690,6 +690,7 @@ void ocfs2_journal_shutdown(struct ocfs2_super *osb) /* Shutdown the kernel journal system */ jbd2_journal_destroy(journal->j_journal); + journal->j_journal = NULL; OCFS2_I(inode)->ip_open_count--; -- cgit v1.2.3-70-g09d2 From 4c1bbf1ba631d7db61ce3462349a3f5d14ae3009 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Mon, 6 Oct 2008 16:59:55 +0800 Subject: ocfs2: return 0 in page_mkwrite to let VFS retry. In ocfs2_page_mkwrite, we return -EINVAL when we found the page mapping isn't updated, and it will cause the user space program get SIGBUS and exit. The reason is that during race writeable mmap, we will do unmap_mapping_range in ocfs2_data_downconvert_worker. The good thing is that if we reuturn 0 in page_mkwrite, VFS will retry fault and then call page_mkwrite again, so it is safe to return 0 here. Signed-off-by: Tao Ma Signed-off-by: Mark Fasheh --- fs/ocfs2/mmap.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/mmap.c b/fs/ocfs2/mmap.c index 3dc18d67557..eea1d24713e 100644 --- a/fs/ocfs2/mmap.c +++ b/fs/ocfs2/mmap.c @@ -113,7 +113,11 @@ static int __ocfs2_page_mkwrite(struct inode *inode, struct buffer_head *di_bh, * ocfs2_write_begin_nolock(). */ if (!PageUptodate(page) || page->mapping != inode->i_mapping) { - ret = -EINVAL; + /* + * the page has been umapped in ocfs2_data_downconvert_worker. + * So return 0 here and let VFS retry. + */ + ret = 0; goto out; } -- cgit v1.2.3-70-g09d2 From 80bcaf3469b8aefd316d4ceb27d9af7cfbb0b913 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Mon, 27 Oct 2008 06:06:24 +0800 Subject: ocfs2/xattr: Proper hash collision handle in bucket division In ocfs2/xattr, we must make sure the xattrs which have the same hash value exist in the same bucket so that the search schema can work. But in the old implementation, when we want to extend a bucket, we just move half number of xattrs to the new bucket. This works in most cases, but if we are lucky enough we will move 2 xattrs into 2 different buckets. This means that an xattr from the previous bucket cannot be found anymore. This patch fix this problem by finding the right position during extending the bucket and extend an empty bucket if needed. Signed-off-by: Tao Ma Cc: Joel Becker Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 144 ++++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 115 insertions(+), 29 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index a371c01942b..f3ea7efb48c 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -3110,25 +3110,73 @@ static int ocfs2_read_xattr_bucket(struct inode *inode, } /* - * Move half num of the xattrs in old bucket(blk) to new bucket(new_blk). + * Find the suitable pos when we divide a bucket into 2. + * We have to make sure the xattrs with the same hash value exist + * in the same bucket. + * + * If this ocfs2_xattr_header covers more than one hash value, find a + * place where the hash value changes. Try to find the most even split. + * The most common case is that all entries have different hash values, + * and the first check we make will find a place to split. + */ +static int ocfs2_xattr_find_divide_pos(struct ocfs2_xattr_header *xh) +{ + struct ocfs2_xattr_entry *entries = xh->xh_entries; + int count = le16_to_cpu(xh->xh_count); + int delta, middle = count / 2; + + /* + * We start at the middle. Each step gets farther away in both + * directions. We therefore hit the change in hash value + * nearest to the middle. Note that this loop does not execute for + * count < 2. + */ + for (delta = 0; delta < middle; delta++) { + /* Let's check delta earlier than middle */ + if (cmp_xe(&entries[middle - delta - 1], + &entries[middle - delta])) + return middle - delta; + + /* For even counts, don't walk off the end */ + if ((middle + delta + 1) == count) + continue; + + /* Now try delta past middle */ + if (cmp_xe(&entries[middle + delta], + &entries[middle + delta + 1])) + return middle + delta + 1; + } + + /* Every entry had the same hash */ + return count; +} + +/* + * Move some xattrs in old bucket(blk) to new bucket(new_blk). * first_hash will record the 1st hash of the new bucket. + * + * Normally half of the xattrs will be moved. But we have to make + * sure that the xattrs with the same hash value are stored in the + * same bucket. If all the xattrs in this bucket have the same hash + * value, the new bucket will be initialized as an empty one and the + * first_hash will be initialized as (hash_value+1). */ -static int ocfs2_half_xattr_bucket(struct inode *inode, - handle_t *handle, - u64 blk, - u64 new_blk, - u32 *first_hash, - int new_bucket_head) +static int ocfs2_divide_xattr_bucket(struct inode *inode, + handle_t *handle, + u64 blk, + u64 new_blk, + u32 *first_hash, + int new_bucket_head) { int ret, i; - u16 count, start, len, name_value_len, xe_len, name_offset; + int count, start, len, name_value_len = 0, xe_len, name_offset = 0; u16 blk_per_bucket = ocfs2_blocks_per_xattr_bucket(inode->i_sb); struct buffer_head **s_bhs, **t_bhs = NULL; struct ocfs2_xattr_header *xh; struct ocfs2_xattr_entry *xe; int blocksize = inode->i_sb->s_blocksize; - mlog(0, "move half of xattrs from bucket %llu to %llu\n", + mlog(0, "move some of xattrs from bucket %llu to %llu\n", blk, new_blk); s_bhs = kcalloc(blk_per_bucket, sizeof(struct buffer_head *), GFP_NOFS); @@ -3171,14 +3219,35 @@ static int ocfs2_half_xattr_bucket(struct inode *inode, } } + xh = (struct ocfs2_xattr_header *)s_bhs[0]->b_data; + count = le16_to_cpu(xh->xh_count); + start = ocfs2_xattr_find_divide_pos(xh); + + if (start == count) { + xe = &xh->xh_entries[start-1]; + + /* + * initialized a new empty bucket here. + * The hash value is set as one larger than + * that of the last entry in the previous bucket. + */ + for (i = 0; i < blk_per_bucket; i++) + memset(t_bhs[i]->b_data, 0, blocksize); + + xh = (struct ocfs2_xattr_header *)t_bhs[0]->b_data; + xh->xh_free_start = cpu_to_le16(blocksize); + xh->xh_entries[0].xe_name_hash = xe->xe_name_hash; + le32_add_cpu(&xh->xh_entries[0].xe_name_hash, 1); + + goto set_num_buckets; + } + /* copy the whole bucket to the new first. */ for (i = 0; i < blk_per_bucket; i++) memcpy(t_bhs[i]->b_data, s_bhs[i]->b_data, blocksize); /* update the new bucket. */ xh = (struct ocfs2_xattr_header *)t_bhs[0]->b_data; - count = le16_to_cpu(xh->xh_count); - start = count / 2; /* * Calculate the total name/value len and xh_free_start for @@ -3235,6 +3304,7 @@ static int ocfs2_half_xattr_bucket(struct inode *inode, xh->xh_free_start = xe->xe_name_offset; } +set_num_buckets: /* set xh->xh_num_buckets for the new xh. */ if (new_bucket_head) xh->xh_num_buckets = cpu_to_le16(1); @@ -3252,9 +3322,13 @@ static int ocfs2_half_xattr_bucket(struct inode *inode, *first_hash = le32_to_cpu(xh->xh_entries[0].xe_name_hash); /* - * Now only update the 1st block of the old bucket. - * Please note that the entry has been sorted already above. + * Now only update the 1st block of the old bucket. If we + * just added a new empty bucket, there is no need to modify + * it. */ + if (start == count) + goto out; + xh = (struct ocfs2_xattr_header *)s_bhs[0]->b_data; memset(&xh->xh_entries[start], 0, sizeof(struct ocfs2_xattr_entry) * (count - start)); @@ -3439,15 +3513,15 @@ out: } /* - * Move half of the xattrs in this cluster to the new cluster. + * Move some xattrs in this cluster to the new cluster. * This function should only be called when bucket size == cluster size. * Otherwise ocfs2_mv_xattr_bucket_cross_cluster should be used instead. */ -static int ocfs2_half_xattr_cluster(struct inode *inode, - handle_t *handle, - u64 prev_blk, - u64 new_blk, - u32 *first_hash) +static int ocfs2_divide_xattr_cluster(struct inode *inode, + handle_t *handle, + u64 prev_blk, + u64 new_blk, + u32 *first_hash) { u16 blk_per_bucket = ocfs2_blocks_per_xattr_bucket(inode->i_sb); int ret, credits = 2 * blk_per_bucket; @@ -3461,8 +3535,8 @@ static int ocfs2_half_xattr_cluster(struct inode *inode, } /* Move half of the xattr in start_blk to the next bucket. */ - return ocfs2_half_xattr_bucket(inode, handle, prev_blk, - new_blk, first_hash, 1); + return ocfs2_divide_xattr_bucket(inode, handle, prev_blk, + new_blk, first_hash, 1); } /* @@ -3524,9 +3598,9 @@ static int ocfs2_adjust_xattr_cross_cluster(struct inode *inode, last_blk, new_blk, v_start); else { - ret = ocfs2_half_xattr_cluster(inode, handle, - last_blk, new_blk, - v_start); + ret = ocfs2_divide_xattr_cluster(inode, handle, + last_blk, new_blk, + v_start); if ((*header_bh)->b_blocknr == last_blk && extend) *extend = 0; @@ -3743,8 +3817,8 @@ static int ocfs2_extend_xattr_bucket(struct inode *inode, } /* Move half of the xattr in start_blk to the next bucket. */ - ret = ocfs2_half_xattr_bucket(inode, handle, start_blk, - start_blk + blk_per_bucket, NULL, 0); + ret = ocfs2_divide_xattr_bucket(inode, handle, start_blk, + start_blk + blk_per_bucket, NULL, 0); le16_add_cpu(&first_xh->xh_num_buckets, 1); ocfs2_journal_dirty(handle, first_bh); @@ -4435,11 +4509,21 @@ out: return ret; } -/* check whether the xattr bucket is filled up with the same hash value. */ +/* + * check whether the xattr bucket is filled up with the same hash value. + * If we want to insert the xattr with the same hash, return -ENOSPC. + * If we want to insert a xattr with different hash value, go ahead + * and ocfs2_divide_xattr_bucket will handle this. + */ static int ocfs2_check_xattr_bucket_collision(struct inode *inode, - struct ocfs2_xattr_bucket *bucket) + struct ocfs2_xattr_bucket *bucket, + const char *name) { struct ocfs2_xattr_header *xh = bucket->xh; + u32 name_hash = ocfs2_xattr_name_hash(inode, name, strlen(name)); + + if (name_hash != le32_to_cpu(xh->xh_entries[0].xe_name_hash)) + return 0; if (xh->xh_entries[le16_to_cpu(xh->xh_count) - 1].xe_name_hash == xh->xh_entries[0].xe_name_hash) { @@ -4562,7 +4646,9 @@ try_again: * one bucket's worth, so check it here whether we need to * add a new bucket for the insert. */ - ret = ocfs2_check_xattr_bucket_collision(inode, &xs->bucket); + ret = ocfs2_check_xattr_bucket_collision(inode, + &xs->bucket, + xi->name); if (ret) { mlog_errno(ret); goto out; -- cgit v1.2.3-70-g09d2 From c435400140d24fbcb3da6b1e006be831f9056cb6 Mon Sep 17 00:00:00 2001 From: Dmitri Monakhov Date: Mon, 27 Oct 2008 13:01:49 -0700 Subject: ocfs2: truncate outstanding block after direct io failure Signed-off-by: Dmitri Monakhov Cc: Jeff Moyer Cc: Mark Fasheh Cc: Joel Becker Cc: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Mark Fasheh --- fs/ocfs2/file.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 3138a385fdb..e2570a3bc2b 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1866,6 +1866,13 @@ relock: written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos, ppos, count, ocount); if (written < 0) { + /* + * direct write may have instantiated a few + * blocks outside i_size. Trim these off again. + * Don't need i_size_read because we hold i_mutex. + */ + if (*ppos + count > inode->i_size) + vmtruncate(inode, inode->i_size); ret = written; goto out_dio; } -- cgit v1.2.3-70-g09d2 From de29c08528bae45e3fa1171d190f1340e37e0f70 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Wed, 29 Oct 2008 14:45:30 -0700 Subject: ocfs2: fix printk related build warnings in xattr.c Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index f3ea7efb48c..70baffeb181 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -2336,7 +2336,8 @@ static int ocfs2_xattr_index_block_find(struct inode *inode, BUG_ON(p_blkno == 0 || num_clusters == 0 || first_hash > name_hash); mlog(0, "find xattr extent rec %u clusters from %llu, the first hash " - "in the rec is %u\n", num_clusters, p_blkno, first_hash); + "in the rec is %u\n", num_clusters, (unsigned long long)p_blkno, + first_hash); ret = ocfs2_xattr_bucket_find(inode, name_index, name, name_hash, p_blkno, first_hash, num_clusters, xs); @@ -2360,7 +2361,7 @@ static int ocfs2_iterate_xattr_buckets(struct inode *inode, memset(&bucket, 0, sizeof(bucket)); mlog(0, "iterating xattr buckets in %u clusters starting from %llu\n", - clusters, blkno); + clusters, (unsigned long long)blkno); for (i = 0; i < num_buckets; i++, blkno += blk_per_bucket) { ret = ocfs2_read_blocks(inode, blkno, blk_per_bucket, @@ -2378,7 +2379,8 @@ static int ocfs2_iterate_xattr_buckets(struct inode *inode, if (i == 0) num_buckets = le16_to_cpu(bucket.xh->xh_num_buckets); - mlog(0, "iterating xattr bucket %llu, first hash %u\n", blkno, + mlog(0, "iterating xattr bucket %llu, first hash %u\n", + (unsigned long long)blkno, le32_to_cpu(bucket.xh->xh_entries[0].xe_name_hash)); if (func) { ret = func(inode, &bucket, para); @@ -2714,7 +2716,8 @@ static int ocfs2_xattr_create_index_block(struct inode *inode, */ blkno = ocfs2_clusters_to_blocks(inode->i_sb, bit_off); - mlog(0, "allocate 1 cluster from %llu to xattr block\n", blkno); + mlog(0, "allocate 1 cluster from %llu to xattr block\n", + (unsigned long long)blkno); xh_bh = sb_getblk(inode->i_sb, blkno); if (!xh_bh) { @@ -2883,8 +2886,8 @@ static int ocfs2_defrag_xattr_bucket(struct inode *inode, mlog(0, "adjust xattr bucket in %llu, count = %u, " "xh_free_start = %u, xh_name_value_len = %u.\n", - blkno, le16_to_cpu(xh->xh_count), xh_free_start, - le16_to_cpu(xh->xh_name_value_len)); + (unsigned long long)blkno, le16_to_cpu(xh->xh_count), + xh_free_start, le16_to_cpu(xh->xh_name_value_len)); /* * sort all the entries by their offset. @@ -3000,7 +3003,7 @@ static int ocfs2_mv_xattr_bucket_cross_cluster(struct inode *inode, prev_blkno += (num_clusters - 1) * bpc + bpc / 2; mlog(0, "move half of xattrs in cluster %llu to %llu\n", - prev_blkno, new_blkno); + (unsigned long long)prev_blkno, (unsigned long long)new_blkno); /* * We need to update the 1st half of the new cluster and @@ -3177,7 +3180,7 @@ static int ocfs2_divide_xattr_bucket(struct inode *inode, int blocksize = inode->i_sb->s_blocksize; mlog(0, "move some of xattrs from bucket %llu to %llu\n", - blk, new_blk); + (unsigned long long)blk, (unsigned long long)new_blk); s_bhs = kcalloc(blk_per_bucket, sizeof(struct buffer_head *), GFP_NOFS); if (!s_bhs) @@ -3376,7 +3379,8 @@ static int ocfs2_cp_xattr_bucket(struct inode *inode, BUG_ON(s_blkno == t_blkno); mlog(0, "cp bucket %llu to %llu, target is %d\n", - s_blkno, t_blkno, t_is_new); + (unsigned long long)s_blkno, (unsigned long long)t_blkno, + t_is_new); s_bhs = kzalloc(sizeof(struct buffer_head *) * blk_per_bucket, GFP_NOFS); @@ -3448,7 +3452,8 @@ static int ocfs2_cp_xattr_cluster(struct inode *inode, struct ocfs2_xattr_header *xh; u64 to_blk_start = to_blk; - mlog(0, "cp xattrs from cluster %llu to %llu\n", src_blk, to_blk); + mlog(0, "cp xattrs from cluster %llu to %llu\n", + (unsigned long long)src_blk, (unsigned long long)to_blk); /* * We need to update the new cluster and 1 more for the update of @@ -3579,7 +3584,8 @@ static int ocfs2_adjust_xattr_cross_cluster(struct inode *inode, int bpc = ocfs2_clusters_to_blocks(inode->i_sb, 1); mlog(0, "adjust xattrs from cluster %llu len %u to %llu\n", - prev_blk, prev_clusters, new_blk); + (unsigned long long)prev_blk, prev_clusters, + (unsigned long long)new_blk); if (ocfs2_xattr_buckets_per_cluster(OCFS2_SB(inode->i_sb)) > 1) ret = ocfs2_mv_xattr_bucket_cross_cluster(inode, @@ -3649,7 +3655,7 @@ static int ocfs2_add_new_xattr_cluster(struct inode *inode, mlog(0, "Add new xattr cluster for %llu, previous xattr hash = %u, " "previous xattr blkno = %llu\n", (unsigned long long)OCFS2_I(inode)->ip_blkno, - prev_cpos, prev_blkno); + prev_cpos, (unsigned long long)prev_blkno); ocfs2_init_xattr_tree_extent_tree(&et, inode, root_bh); @@ -3736,7 +3742,7 @@ static int ocfs2_add_new_xattr_cluster(struct inode *inode, } } mlog(0, "Insert %u clusters at block %llu for xattr at %u\n", - num_bits, block, v_start); + num_bits, (unsigned long long)block, v_start); ret = ocfs2_insert_extent(osb, handle, inode, &et, v_start, block, num_bits, 0, meta_ac); if (ret < 0) { @@ -3781,7 +3787,7 @@ static int ocfs2_extend_xattr_bucket(struct inode *inode, u16 bucket = le16_to_cpu(first_xh->xh_num_buckets); mlog(0, "extend xattr bucket in %llu, xattr extend rec starting " - "from %llu, len = %u\n", start_blk, + "from %llu, len = %u\n", (unsigned long long)start_blk, (unsigned long long)first_bh->b_blocknr, num_clusters); BUG_ON(bucket >= num_buckets); -- cgit v1.2.3-70-g09d2 From 6c1e183e12dbd78a897a859f13220406296fee31 Mon Sep 17 00:00:00 2001 From: Tiger Yang Date: Sun, 2 Nov 2008 19:04:21 +0800 Subject: ocfs2: Check search result in ocfs2_xattr_block_get() ocfs2_xattr_block_get() calls ocfs2_xattr_search() to find an external xattr, but doesn't check the search result that is passed back via struct ocfs2_xattr_search. Add a check for search result, and pass back -ENODATA if the xattr search failed. This avoids a later NULL pointer error. Signed-off-by: Tiger Yang Signed-off-by: Mark Fasheh --- fs/ocfs2/xattr.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 70baffeb181..054e2efb0b7 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -777,6 +777,11 @@ static int ocfs2_xattr_block_get(struct inode *inode, goto cleanup; } + if (xs->not_found) { + ret = -ENODATA; + goto cleanup; + } + xb = (struct ocfs2_xattr_block *)xs->xattr_bh->b_data; size = le64_to_cpu(xs->here->xe_value_size); if (buffer) { @@ -860,7 +865,7 @@ static int ocfs2_xattr_get(struct inode *inode, down_read(&oi->ip_xattr_sem); ret = ocfs2_xattr_ibody_get(inode, name_index, name, buffer, buffer_size, &xis); - if (ret == -ENODATA) + if (ret == -ENODATA && di->i_xattr_loc) ret = ocfs2_xattr_block_get(inode, name_index, name, buffer, buffer_size, &xbs); up_read(&oi->ip_xattr_sem); -- cgit v1.2.3-70-g09d2 From 29b143281657e0b064ee0553837cf9dd4d2441f9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 7 Nov 2008 22:57:16 -0800 Subject: Revert "sparc: correct section of current_pc()" This reverts commit 8dd9453737822469837d48d5da3785ce70fb2118. This fixes a boot failure reported by Robert Reif. The code above the section change expects to fallthrough, so we can't make such a section change here. --- arch/sparc/kernel/head.S | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S index 2fe2c117e77..2d325fd8457 100644 --- a/arch/sparc/kernel/head.S +++ b/arch/sparc/kernel/head.S @@ -465,7 +465,6 @@ gokernel: mov %o7, %g4 ! Save %o7 /* Jump to it, and pray... */ - __INIT current_pc: call 1f nop -- cgit v1.2.3-70-g09d2 From 12de512ae1d6d150f95b7157cb3293ef7545676d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 10 Nov 2008 12:35:29 -0800 Subject: sparc64: Update defconfig. Signed-off-by: David S. Miller --- arch/sparc64/defconfig | 232 +++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 195 insertions(+), 37 deletions(-) diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index 82cab5cc807..05d19a3e590 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Fri Jul 18 00:47:07 2008 +# Linux kernel version: 2.6.28-rc4 +# Mon Nov 10 12:35:09 2008 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -62,7 +62,6 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -79,7 +78,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -92,9 +93,9 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -126,6 +127,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -138,7 +140,7 @@ CONFIG_HZ_100=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_HOTPLUG_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_TICK_ONESHOT=y @@ -148,6 +150,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_NR_CPUS=64 # CONFIG_CPU_FREQ is not set +CONFIG_US3_MC=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y @@ -169,7 +172,6 @@ CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y @@ -177,8 +179,10 @@ CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 +CONFIG_UNEVICTABLE_LRU=y CONFIG_SBUS=y CONFIG_SBUSCHAR=y CONFIG_SUN_AUXIO=y @@ -198,6 +202,8 @@ CONFIG_SUN_OPENPROMFS=m # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y @@ -207,10 +213,6 @@ CONFIG_SCHED_MC=y CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # CONFIG_CMDLINE_BOOL is not set - -# -# Networking -# CONFIG_NET=y # @@ -224,6 +226,7 @@ CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y CONFIG_NET_KEY=m CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -299,7 +302,9 @@ CONFIG_IP_DCCP_TFRC_LIB=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m +# CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set @@ -320,11 +325,10 @@ CONFIG_NET_TCPPROBE=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -375,21 +379,21 @@ CONFIG_MISC_DEVICES=y # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -413,10 +417,8 @@ CONFIG_BLK_DEV_ALI15X3=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -540,7 +542,6 @@ CONFIG_DM_ZERO=m # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -548,7 +549,22 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_SUNLANCE is not set @@ -565,6 +581,9 @@ CONFIG_SUNVNET=m # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -582,16 +601,15 @@ CONFIG_NET_PCI=y # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_MYRI_SBUS is not set @@ -607,18 +625,23 @@ CONFIG_TIGON3=m CONFIG_BNX2=m # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set CONFIG_NIU=m +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -694,9 +717,11 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=y # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -708,6 +733,7 @@ CONFIG_INPUT_SPARCSPKR=y # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set # @@ -725,6 +751,7 @@ CONFIG_SERIO_RAW=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -735,6 +762,7 @@ CONFIG_HW_CONSOLE=y # # Serial drivers # +# CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support @@ -762,6 +790,7 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # @@ -827,10 +856,13 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -882,6 +914,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_ULTRA45 is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -896,8 +929,14 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -924,6 +963,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -975,6 +1015,7 @@ CONFIG_FB_ATY_GX=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -983,7 +1024,10 @@ CONFIG_FB_ATY_GX=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1015,6 +1059,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_SUN_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1120,9 +1165,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1138,6 +1210,9 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1155,6 +1230,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1162,6 +1239,7 @@ CONFIG_USB_UHCI_HCD=m # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1191,7 +1269,6 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1204,7 +1281,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1222,21 +1299,80 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +CONFIG_RTC_DRV_M48T59=y +CONFIG_RTC_DRV_BQ4802=y +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SUN4V=y +CONFIG_RTC_DRV_STARFIRE=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set +CONFIG_STAGING_EXCLUDE_BUILD=y # # Misc Linux/SPARC drivers # CONFIG_SUN_OPENPROMIO=y # CONFIG_OBP_FLASH is not set -# CONFIG_SUN_BPP is not set +# CONFIG_TADPOLE_TS102_UCTRL is not set # CONFIG_BBC_I2C is not set # CONFIG_ENVCTRL is not set # CONFIG_DISPLAY7SEG is not set @@ -1253,13 +1389,14 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set @@ -1290,6 +1427,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1311,6 +1449,7 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1388,6 +1527,8 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1408,20 +1549,30 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1436,6 +1587,7 @@ CONFIG_HAVE_ARCH_KGDB=y CONFIG_KEYS=y # CONFIG_KEYS_DEBUG_PROC_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m @@ -1446,10 +1598,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1523,6 +1677,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1530,7 +1689,6 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set -- cgit v1.2.3-70-g09d2 From ec5d7657f746c46b5fbb3dbec6d0f7d8b6b82961 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Mon, 10 Nov 2008 13:09:21 -0800 Subject: powerpc: Repair device bindings documentation Commit d0fc2eaaf4c56a95f5ed29b6bfb609e19714fc16 "powerpc/fsl: Refactor device bindings" split out a number of device bindings from booting-without-of.txt into separate files. Having them all in one file was a frequent source of merge conflicts. However, in the next merge, 49997d75152b3d23c53b0fa730599f2f74c92c65, there was another conflict. Some of the bindings removed from booting-without-of.txt were mistakenly added back in and the copies in dts-bindings were kept as well. This patch re-removes "Freescale Display Interface" and "Freescale on board FPGA" and fixes the table of contents. Signed-off-by: Trent Piepho Signed-off-by: Kumar Gala --- Documentation/powerpc/booting-without-of.txt | 65 +++++----------------------- 1 file changed, 10 insertions(+), 55 deletions(-) diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 02ea9a971b8..0ab0230cbcb 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -41,25 +41,14 @@ Table of Contents VI - System-on-a-chip devices and nodes 1) Defining child nodes of an SOC 2) Representing devices without a current OF specification - a) MDIO IO device - b) Gianfar-compatible ethernet nodes - c) PHY nodes - d) Interrupt controllers - e) I2C - f) Freescale SOC USB controllers - g) Freescale SOC SEC Security Engines - h) Board Control and Status (BCSR) - i) Freescale QUICC Engine module (QE) - j) CFI or JEDEC memory-mapped NOR flash - k) Global Utilities Block - l) Freescale Communications Processor Module - m) Chipselect/Local Bus - n) 4xx/Axon EMAC ethernet nodes - o) Xilinx IP cores - p) Freescale Synchronous Serial Interface - q) USB EHCI controllers - r) MDIO on GPIOs - s) SPI busses + a) PHY nodes + b) Interrupt controllers + c) CFI or JEDEC memory-mapped NOR flash + d) 4xx/Axon EMAC ethernet nodes + e) Xilinx IP cores + f) USB EHCI controllers + g) MDIO on GPIOs + h) SPI busses VII - Marvell Discovery mv64[345]6x System Controller chips 1) The /system-controller node @@ -1830,41 +1819,7 @@ platforms are moved over to use the flattened-device-tree model. big-endian; }; - r) Freescale Display Interface Unit - - The Freescale DIU is a LCD controller, with proper hardware, it can also - drive DVI monitors. - - Required properties: - - compatible : should be "fsl-diu". - - reg : should contain at least address and length of the DIU register - set. - - Interrupts : one DIU interrupt should be describe here. - - Example (MPC8610HPCD) - display@2c000 { - compatible = "fsl,diu"; - reg = <0x2c000 100>; - interrupts = <72 2>; - interrupt-parent = <&mpic>; - }; - - s) Freescale on board FPGA - - This is the memory-mapped registers for on board FPGA. - - Required properities: - - compatible : should be "fsl,fpga-pixis". - - reg : should contain the address and the lenght of the FPPGA register - set. - - Example (MPC8610HPCD) - board-control@e8000000 { - compatible = "fsl,fpga-pixis"; - reg = <0xe8000000 32>; - }; - - r) MDIO on GPIOs + g) MDIO on GPIOs Currently defined compatibles: - virtual,gpio-mdio @@ -1884,7 +1839,7 @@ platforms are moved over to use the flattened-device-tree model. &qe_pio_c 6>; }; - s) SPI (Serial Peripheral Interface) busses + h) SPI (Serial Peripheral Interface) busses SPI busses can be described with a node for the SPI master device and a set of child nodes for each SPI slave on the bus. For this -- cgit v1.2.3-70-g09d2 From 1f8f5cf6e4f038552a3e47b66085452c08556d71 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 10 Nov 2008 19:00:05 +0000 Subject: KEYS: Make request key instantiate the per-user keyrings Make request_key() instantiate the per-user keyrings so that it doesn't oops if it needs to get hold of the user session keyring because there isn't a session keyring in place. Signed-off-by: David Howells Tested-by: Steve French Tested-by: Rutger Nijlunsing Signed-off-by: Linus Torvalds --- security/keys/internal.h | 1 + security/keys/process_keys.c | 2 +- security/keys/request_key.c | 4 ++++ 3 files changed, 6 insertions(+), 1 deletion(-) diff --git a/security/keys/internal.h b/security/keys/internal.h index b39f5c2e2c4..239098f0fd7 100644 --- a/security/keys/internal.h +++ b/security/keys/internal.h @@ -107,6 +107,7 @@ extern key_ref_t search_process_keyrings(struct key_type *type, extern struct key *find_keyring_by_name(const char *name, bool skip_perm_check); +extern int install_user_keyrings(struct task_struct *tsk); extern int install_thread_keyring(struct task_struct *tsk); extern int install_process_keyring(struct task_struct *tsk); diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c index 5be6d018759..45b240af6db 100644 --- a/security/keys/process_keys.c +++ b/security/keys/process_keys.c @@ -40,7 +40,7 @@ struct key_user root_key_user = { /* * install user and user session keyrings for a particular UID */ -static int install_user_keyrings(struct task_struct *tsk) +int install_user_keyrings(struct task_struct *tsk) { struct user_struct *user = tsk->user; struct key *uid_keyring, *session_keyring; diff --git a/security/keys/request_key.c b/security/keys/request_key.c index ba32ca6469b..abea08f87fe 100644 --- a/security/keys/request_key.c +++ b/security/keys/request_key.c @@ -74,6 +74,10 @@ static int call_sbin_request_key(struct key_construction *cons, kenter("{%d},{%d},%s", key->serial, authkey->serial, op); + ret = install_user_keyrings(tsk); + if (ret < 0) + goto error_alloc; + /* allocate a new session keyring */ sprintf(desc, "_req.%u", key->serial); -- cgit v1.2.3-70-g09d2 From 4694516d1987303dd83bfd0efdd36fa5b65d701b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 10 Nov 2008 21:52:47 +0100 Subject: x86: Make NUMA on 32-bit depend on BROKEN While investigating the failure of hibernation on 32-bit x86 with CONFIG_NUMA set, as described in this message http://marc.info/?l=linux-kernel&m=122634118116226&w=4 I asked some people for help and I was told that it wasn't really worth the effort, because CONFIG_NUMA was generally broken on 32-bit x86 systems and it shouldn't be used in such configs. For this reason, make CONFIG_NUMA depend on BROKEN instead of EXPERIMENTAL on x86-32. Signed-off-by: Rafael J. Wysocki Cc: Andi Kleen Cc: Pavel Machek Cc: Peter Zijlstra Signed-off-by: Linus Torvalds --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 4cf0ab13d18..93224b56918 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -957,7 +957,7 @@ config ARCH_PHYS_ADDR_T_64BIT config NUMA bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)" depends on SMP - depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL) + depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && BROKEN) default n if X86_PC default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP) help -- cgit v1.2.3-70-g09d2 From ee5f80a993539490a07477ff2526bf62c503fbb4 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 7 Nov 2008 11:06:00 +0100 Subject: irq: call __irq_enter() before calling the tick_idle_check Impact: avoid spurious ksoftirqd wakeups The tick idle check which is called from irq_enter() was run before the call to __irq_enter() which did not set the in_interrupt() bits in preempt_count. That way the raise of a softirq woke up softirqd for nothing as the softirq was handled on return from interrupt. Call __irq_enter() before calling into the tick idle check code. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/softirq.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/kernel/softirq.c b/kernel/softirq.c index 7110daeb9a9..e7c69a720d6 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -269,10 +269,11 @@ void irq_enter(void) { int cpu = smp_processor_id(); - if (idle_cpu(cpu) && !in_interrupt()) + if (idle_cpu(cpu) && !in_interrupt()) { + __irq_enter(); tick_check_idle(cpu); - - __irq_enter(); + } else + __irq_enter(); } #ifdef __ARCH_IRQ_EXIT_IRQS_DISABLED -- cgit v1.2.3-70-g09d2 From 309f796f301bf1c2731d9b9eb8642c76b523ebf7 Mon Sep 17 00:00:00 2001 From: Ferenc Wagner Date: Mon, 10 Nov 2008 13:37:40 -0800 Subject: vlan: Fix typos in proc output string Signed-off-by: Ferenc Wagner Signed-off-by: David S. Miller --- net/8021q/vlanproc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c index 0feefa4e1a4..3628e0a81b4 100644 --- a/net/8021q/vlanproc.c +++ b/net/8021q/vlanproc.c @@ -314,7 +314,7 @@ static int vlandev_seq_show(struct seq_file *seq, void *offset) dev_info->ingress_priority_map[6], dev_info->ingress_priority_map[7]); - seq_printf(seq, "EGRESSS priority Mappings: "); + seq_printf(seq, " EGRESS priority mappings: "); for (i = 0; i < 16; i++) { const struct vlan_priority_tci_mapping *mp = dev_info->egress_priority_map[i]; -- cgit v1.2.3-70-g09d2 From ae99286b4f1be7788f2d6947c66a91dbd6351eec Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 10 Nov 2008 13:20:23 +0100 Subject: nohz: disable tick_nohz_kick_tick() for now Impact: nohz powersavings and wakeup regression commit fb02fbc14d17837b4b7b02dbb36142c16a7bf208 (NOHZ: restart tick device from irq_enter()) causes a serious wakeup regression. While the patch is correct it does not take into account that spurious wakeups happen on x86. A fix for this issue is available, but we just revert to the .27 behaviour and let long running softirqs screw themself. Disable it for now. Signed-off-by: Thomas Gleixner --- kernel/time/tick-sched.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 5bbb1044f84..342fc9ccab4 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -568,6 +568,9 @@ static void tick_nohz_switch_to_nohz(void) */ static void tick_nohz_kick_tick(int cpu) { +#if 0 + /* Switch back to 2.6.27 behaviour */ + struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); ktime_t delta, now; @@ -584,6 +587,7 @@ static void tick_nohz_kick_tick(int cpu) return; tick_nohz_restart(ts, now); +#endif } #else -- cgit v1.2.3-70-g09d2 From 9581483444d002e0b3807d9e66f552f372a6fc5e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 6 Nov 2008 01:37:00 +0000 Subject: SSB: hide empty sub menu If the target system cannot support SSB, then don't show the menu option as it'll simply be an empty submenu. Signed-off-by: Mike Frysinger Signed-off-by: David S. Miller --- drivers/ssb/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig index 307b1f62d94..b1b947edcf0 100644 --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -1,10 +1,11 @@ -menu "Sonics Silicon Backplane" - config SSB_POSSIBLE bool depends on HAS_IOMEM && HAS_DMA default y +menu "Sonics Silicon Backplane" + depends on SSB_POSSIBLE + config SSB tristate "Sonics Silicon Backplane support" depends on SSB_POSSIBLE -- cgit v1.2.3-70-g09d2 From fd0fcf5c29dd0339c5f5d86eb2cbe9fdad5bcd73 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 6 Nov 2008 10:49:21 +0000 Subject: ssb: Fix DMA-API compilation for non-PCI systems This fixes compilation of the SSB DMA-API code on non-PCI platforms. Signed-off-by: Michael Buesch Signed-off-by: David S. Miller --- include/linux/ssb/ssb.h | 42 +++++++++++++++++++++++++++++++++++------- 1 file changed, 35 insertions(+), 7 deletions(-) diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index e530026eedf..17d9b58f637 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -427,12 +427,16 @@ static inline int ssb_dma_mapping_error(struct ssb_device *dev, dma_addr_t addr) { switch (dev->bus->bustype) { case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST return pci_dma_mapping_error(dev->bus->host_pci, addr); +#endif + break; case SSB_BUSTYPE_SSB: return dma_mapping_error(dev->dev, addr); default: - __ssb_dma_not_implemented(dev); + break; } + __ssb_dma_not_implemented(dev); return -ENOSYS; } @@ -441,12 +445,16 @@ static inline dma_addr_t ssb_dma_map_single(struct ssb_device *dev, void *p, { switch (dev->bus->bustype) { case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST return pci_map_single(dev->bus->host_pci, p, size, dir); +#endif + break; case SSB_BUSTYPE_SSB: return dma_map_single(dev->dev, p, size, dir); default: - __ssb_dma_not_implemented(dev); + break; } + __ssb_dma_not_implemented(dev); return 0; } @@ -455,14 +463,18 @@ static inline void ssb_dma_unmap_single(struct ssb_device *dev, dma_addr_t dma_a { switch (dev->bus->bustype) { case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST pci_unmap_single(dev->bus->host_pci, dma_addr, size, dir); return; +#endif + break; case SSB_BUSTYPE_SSB: dma_unmap_single(dev->dev, dma_addr, size, dir); return; default: - __ssb_dma_not_implemented(dev); + break; } + __ssb_dma_not_implemented(dev); } static inline void ssb_dma_sync_single_for_cpu(struct ssb_device *dev, @@ -472,15 +484,19 @@ static inline void ssb_dma_sync_single_for_cpu(struct ssb_device *dev, { switch (dev->bus->bustype) { case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr, size, dir); return; +#endif + break; case SSB_BUSTYPE_SSB: dma_sync_single_for_cpu(dev->dev, dma_addr, size, dir); return; default: - __ssb_dma_not_implemented(dev); + break; } + __ssb_dma_not_implemented(dev); } static inline void ssb_dma_sync_single_for_device(struct ssb_device *dev, @@ -490,15 +506,19 @@ static inline void ssb_dma_sync_single_for_device(struct ssb_device *dev, { switch (dev->bus->bustype) { case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr, size, dir); return; +#endif + break; case SSB_BUSTYPE_SSB: dma_sync_single_for_device(dev->dev, dma_addr, size, dir); return; default: - __ssb_dma_not_implemented(dev); + break; } + __ssb_dma_not_implemented(dev); } static inline void ssb_dma_sync_single_range_for_cpu(struct ssb_device *dev, @@ -509,17 +529,21 @@ static inline void ssb_dma_sync_single_range_for_cpu(struct ssb_device *dev, { switch (dev->bus->bustype) { case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST /* Just sync everything. That's all the PCI API can do. */ pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr, offset + size, dir); return; +#endif + break; case SSB_BUSTYPE_SSB: dma_sync_single_range_for_cpu(dev->dev, dma_addr, offset, size, dir); return; default: - __ssb_dma_not_implemented(dev); + break; } + __ssb_dma_not_implemented(dev); } static inline void ssb_dma_sync_single_range_for_device(struct ssb_device *dev, @@ -530,17 +554,21 @@ static inline void ssb_dma_sync_single_range_for_device(struct ssb_device *dev, { switch (dev->bus->bustype) { case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST /* Just sync everything. That's all the PCI API can do. */ pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr, offset + size, dir); return; +#endif + break; case SSB_BUSTYPE_SSB: dma_sync_single_range_for_device(dev->dev, dma_addr, offset, size, dir); return; default: - __ssb_dma_not_implemented(dev); + break; } + __ssb_dma_not_implemented(dev); } -- cgit v1.2.3-70-g09d2 From c3d4f44f50b65b0b0290e357f8739cfb3f4bcaca Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Fri, 7 Nov 2008 01:45:52 +0000 Subject: [1/4] I/OAT: fix channel resources free for not allocated channels If the ioatdma driver is loaded but not used it does not allocate descriptors. Before it frees channel resources it should first be sure that they have been previously allocated. Cc: Signed-off-by: Maciej Sosnowski Tested-by: Tom Picard Signed-off-by: Dan Williams Signed-off-by: David S. Miller --- drivers/dma/ioat_dma.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index b0438c4f0c3..dbb8bbb83a3 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -807,6 +807,12 @@ static void ioat_dma_free_chan_resources(struct dma_chan *chan) struct ioat_desc_sw *desc, *_desc; int in_use_descs = 0; + /* Before freeing channel resources first check + * if they have been previously allocated for this channel. + */ + if (ioat_chan->desccount == 0) + return; + tasklet_disable(&ioat_chan->cleanup_task); ioat_dma_memcpy_cleanup(ioat_chan); @@ -869,6 +875,7 @@ static void ioat_dma_free_chan_resources(struct dma_chan *chan) ioat_chan->last_completion = ioat_chan->completion_addr = 0; ioat_chan->pending = 0; ioat_chan->dmacount = 0; + ioat_chan->desccount = 0; ioat_chan->watchdog_completion = 0; ioat_chan->last_compl_desc_addr_hw = 0; ioat_chan->watchdog_tcp_cookie = -- cgit v1.2.3-70-g09d2 From c2c0b4c5434c0a25f7f7796b29155d53805909f5 Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Fri, 7 Nov 2008 01:46:33 +0000 Subject: [2/4] I/OAT: fix dma_pin_iovec_pages() error handling Error handling needs to be modified in dma_pin_iovec_pages(). It should return NULL instead of ERR_PTR (pinned_list is checked for NULL in tcp_recvmsg() to determine if iovec pages have been successfully pinned down). In case of error for the first iovec, local_list->nr_iovecs needs to be initialized. Cc: Signed-off-by: Maciej Sosnowski Signed-off-by: David S. Miller --- drivers/dma/iovlock.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/dma/iovlock.c b/drivers/dma/iovlock.c index e763d723e4c..9f6fe46a9b8 100644 --- a/drivers/dma/iovlock.c +++ b/drivers/dma/iovlock.c @@ -55,7 +55,6 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len) int nr_iovecs = 0; int iovec_len_used = 0; int iovec_pages_used = 0; - long err; /* don't pin down non-user-based iovecs */ if (segment_eq(get_fs(), KERNEL_DS)) @@ -72,23 +71,21 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len) local_list = kmalloc(sizeof(*local_list) + (nr_iovecs * sizeof (struct dma_page_list)) + (iovec_pages_used * sizeof (struct page*)), GFP_KERNEL); - if (!local_list) { - err = -ENOMEM; + if (!local_list) goto out; - } /* list of pages starts right after the page list array */ pages = (struct page **) &local_list->page_list[nr_iovecs]; + local_list->nr_iovecs = 0; + for (i = 0; i < nr_iovecs; i++) { struct dma_page_list *page_list = &local_list->page_list[i]; len -= iov[i].iov_len; - if (!access_ok(VERIFY_WRITE, iov[i].iov_base, iov[i].iov_len)) { - err = -EFAULT; + if (!access_ok(VERIFY_WRITE, iov[i].iov_base, iov[i].iov_len)) goto unpin; - } page_list->nr_pages = num_pages_spanned(&iov[i]); page_list->base_address = iov[i].iov_base; @@ -109,10 +106,8 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len) NULL); up_read(¤t->mm->mmap_sem); - if (ret != page_list->nr_pages) { - err = -ENOMEM; + if (ret != page_list->nr_pages) goto unpin; - } local_list->nr_iovecs = i + 1; } @@ -122,7 +117,7 @@ struct dma_pinned_list *dma_pin_iovec_pages(struct iovec *iov, size_t len) unpin: dma_unpin_iovec_pages(local_list); out: - return ERR_PTR(err); + return NULL; } void dma_unpin_iovec_pages(struct dma_pinned_list *pinned_list) -- cgit v1.2.3-70-g09d2 From 12ccea24e309d815d058cdc6ee8bf2c4b85f0c5f Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Fri, 7 Nov 2008 01:46:55 +0000 Subject: [3/4] I/OAT: fix async_tx.callback checking async_tx.callback should be checked for the first not the last descriptor in the chain. Cc: Signed-off-by: Maciej Sosnowski Signed-off-by: David S. Miller --- drivers/dma/ioat_dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index dbb8bbb83a3..ecd743f7cc6 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -525,7 +525,7 @@ static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx) } hw->ctl = IOAT_DMA_DESCRIPTOR_CTL_CP_STS; - if (new->async_tx.callback) { + if (first->async_tx.callback) { hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN; if (first != new) { /* move callback into to last desc */ @@ -617,7 +617,7 @@ static dma_cookie_t ioat2_tx_submit(struct dma_async_tx_descriptor *tx) } hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_CP_STS; - if (new->async_tx.callback) { + if (first->async_tx.callback) { hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN; if (first != new) { /* move callback into to last desc */ -- cgit v1.2.3-70-g09d2 From 1207e795568a368928dfd23d6817e47f2e8097e3 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 7 Nov 2008 01:47:17 +0000 Subject: [4/4] dca: fixup initialization dependency Mark dca_init as a subsys_initcall since it needs to be ready to go before dependent drivers start registering themselves. Cc: Reported-and-tested-by: Mark Rustad Acked-by: Maciej Sosnowski Signed-off-by: Dan Williams Signed-off-by: David S. Miller --- drivers/dca/dca-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c index ec249d2db63..d883e1b8bb8 100644 --- a/drivers/dca/dca-core.c +++ b/drivers/dca/dca-core.c @@ -270,6 +270,6 @@ static void __exit dca_exit(void) dca_sysfs_exit(); } -module_init(dca_init); +subsys_initcall(dca_init); module_exit(dca_exit); -- cgit v1.2.3-70-g09d2 From 87b30a6530218cde431a659f2c118cb72175507c Mon Sep 17 00:00:00 2001 From: Benjamin Thery Date: Mon, 10 Nov 2008 16:34:11 -0800 Subject: ipv6: fix ip6_mr_init error path The order of cleanup operations in the error/exit section of ip6_mr_init() is completely inversed. It should be the other way around. Also a del_timer() is missing in the error path. Signed-off-by: Benjamin Thery Signed-off-by: David S. Miller --- net/ipv6/ip6mr.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index 182f8a177e7..52a7eb0e2c2 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -981,14 +981,15 @@ int __init ip6_mr_init(void) goto proc_cache_fail; #endif return 0; -reg_notif_fail: - kmem_cache_destroy(mrt_cachep); #ifdef CONFIG_PROC_FS -proc_vif_fail: - unregister_netdevice_notifier(&ip6_mr_notifier); proc_cache_fail: proc_net_remove(&init_net, "ip6_mr_vif"); +proc_vif_fail: + unregister_netdevice_notifier(&ip6_mr_notifier); #endif +reg_notif_fail: + del_timer(&ipmr_expire_timer); + kmem_cache_destroy(mrt_cachep); return err; } -- cgit v1.2.3-70-g09d2 From b7b45f47d6f8c83a0f958d7e2924468b6942dd9e Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Mon, 10 Nov 2008 16:46:06 -0800 Subject: netfilter: payload_len is be16, add size of struct rather than size of pointer payload_len is a be16 value, not cpu_endian, also the size of a ponter to a struct ipv6hdr was being added, not the size of the struct itself. Signed-off-by: Harvey Harrison Signed-off-by: David S. Miller --- net/netfilter/ipvs/ip_vs_xmit.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netfilter/ipvs/ip_vs_xmit.c b/net/netfilter/ipvs/ip_vs_xmit.c index 02ddc2b3ce2..e90d52f199b 100644 --- a/net/netfilter/ipvs/ip_vs_xmit.c +++ b/net/netfilter/ipvs/ip_vs_xmit.c @@ -713,7 +713,8 @@ ip_vs_tunnel_xmit_v6(struct sk_buff *skb, struct ip_vs_conn *cp, iph = ipv6_hdr(skb); iph->version = 6; iph->nexthdr = IPPROTO_IPV6; - iph->payload_len = old_iph->payload_len + sizeof(old_iph); + iph->payload_len = old_iph->payload_len; + be16_add_cpu(&iph->payload_len, sizeof(*old_iph)); iph->priority = old_iph->priority; memset(&iph->flow_lbl, 0, sizeof(iph->flow_lbl)); iph->daddr = rt->rt6i_dst.addr; -- cgit v1.2.3-70-g09d2 From bf5e6519b85b3853f2d0bb4f17a4e2eaeffeb574 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 10 Nov 2008 21:46:00 -0500 Subject: ftrace: disable tracing on resize Impact: fix for bug on resize This patch addresses the bug found here: http://bugzilla.kernel.org/show_bug.cgi?id=11996 When ftrace converted to the new unified trace buffer, the resizing of the buffer was not protected as much as it was originally. If tracing is performed while the resize occurs, then the buffer can be corrupted. This patch disables all ftrace buffer modifications before a resize takes place. Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 9f3b478f917..abfa8103d04 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2676,7 +2676,7 @@ tracing_entries_write(struct file *filp, const char __user *ubuf, { unsigned long val; char buf[64]; - int ret; + int ret, cpu; struct trace_array *tr = filp->private_data; if (cnt >= sizeof(buf)) @@ -2704,6 +2704,14 @@ tracing_entries_write(struct file *filp, const char __user *ubuf, goto out; } + /* disable all cpu buffers */ + for_each_tracing_cpu(cpu) { + if (global_trace.data[cpu]) + atomic_inc(&global_trace.data[cpu]->disabled); + if (max_tr.data[cpu]) + atomic_inc(&max_tr.data[cpu]->disabled); + } + if (val != global_trace.entries) { ret = ring_buffer_resize(global_trace.buffer, val); if (ret < 0) { @@ -2735,6 +2743,13 @@ tracing_entries_write(struct file *filp, const char __user *ubuf, if (tracing_disabled) cnt = -ENOMEM; out: + for_each_tracing_cpu(cpu) { + if (global_trace.data[cpu]) + atomic_dec(&global_trace.data[cpu]->disabled); + if (max_tr.data[cpu]) + atomic_dec(&max_tr.data[cpu]->disabled); + } + max_tr.entries = global_trace.entries; mutex_unlock(&trace_types_lock); -- cgit v1.2.3-70-g09d2 From 4143c5cb36331155a1823af8b3a8c761a59fed71 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 10 Nov 2008 21:46:01 -0500 Subject: ring-buffer: prevent infinite looping on time stamping Impact: removal of unnecessary looping The lockless part of the ring buffer allows for reentry into the code from interrupts. A timestamp is taken, a test is preformed and if it detects that an interrupt occurred that did tracing, it tries again. The problem arises if the timestamp code itself causes a trace. The detection will detect this and loop again. The difference between this and an interrupt doing tracing, is that this will fail every time, and cause an infinite loop. Currently, we test if the loop happens 1000 times, and if so, it will produce a warning and disable the ring buffer. The problem with this approach is that it makes it difficult to perform some types of tracing (tracing the timestamp code itself). Each trace entry has a delta timestamp from the previous entry. If a trace entry is reserved but and interrupt occurs and traces before the previous entry is commited, the delta timestamp for that entry will be zero. This actually makes sense in terms of tracing, because the interrupt entry happened before the preempted entry was commited, so one may consider the two happening at the same time. The order is still preserved in the buffer. With this idea, instead of trying to get a new timestamp if an interrupt made it in between the timestamp and the test, the entry could simply make the delta zero and continue. This will prevent interrupts or tracers in the timer code from causing the above loop. Signed-off-by: Steven Rostedt --- kernel/trace/ring_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 3f338063864..2f76193c348 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -1060,7 +1060,7 @@ rb_reserve_next_event(struct ring_buffer_per_cpu *cpu_buffer, /* Did the write stamp get updated already? */ if (unlikely(ts < cpu_buffer->write_stamp)) - goto again; + delta = 0; if (test_time_stamp(delta)) { -- cgit v1.2.3-70-g09d2 From 013cd397532e5803a1625954a884d021653da720 Mon Sep 17 00:00:00 2001 From: Jianjun Kong Date: Mon, 10 Nov 2008 21:37:39 -0800 Subject: mac80211: fix a buffer overrun in station debug code net/mac80211/debugfs_sta.c The trailing zero was written to state[4], it's out of bounds. Signed-off-by: Jianjun Kong Signed-off-by: David S. Miller --- net/mac80211/debugfs_sta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 189d0bafa91..b85c4f27b36 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -199,7 +199,7 @@ static ssize_t sta_agg_status_write(struct file *file, /* toggle Rx aggregation command */ tid_num = tid_num - 100; if (tid_static_rx[tid_num] == 1) { - strcpy(state, "off "); + strcpy(state, "off"); ieee80211_sta_stop_rx_ba_session(sta->sdata, da, tid_num, 0, WLAN_REASON_QSTA_REQUIRE_SETUP); sta->ampdu_mlme.tid_state_rx[tid_num] |= -- cgit v1.2.3-70-g09d2 From b971e7ac834e9f4bda96d5a96ae9abccd01c1dd8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 10 Nov 2008 21:43:08 -0800 Subject: net: fix /proc/net/snmp as memory corruptor icmpmsg_put() can happily corrupt kernel memory, using a static table and forgetting to reset an array index in a loop. Remove the static array since its not safe without proper locking. Signed-off-by: Alexey Dobriyan Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/proc.c | 58 +++++++++++++++++++++++++++++---------------------------- 1 file changed, 30 insertions(+), 28 deletions(-) diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c index 8f5a403f6f6..a631a1f110c 100644 --- a/net/ipv4/proc.c +++ b/net/ipv4/proc.c @@ -237,43 +237,45 @@ static const struct snmp_mib snmp4_net_list[] = { SNMP_MIB_SENTINEL }; +static void icmpmsg_put_line(struct seq_file *seq, unsigned long *vals, + unsigned short *type, int count) +{ + int j; + + if (count) { + seq_printf(seq, "\nIcmpMsg:"); + for (j = 0; j < count; ++j) + seq_printf(seq, " %sType%u", + type[j] & 0x100 ? "Out" : "In", + type[j] & 0xff); + seq_printf(seq, "\nIcmpMsg:"); + for (j = 0; j < count; ++j) + seq_printf(seq, " %lu", vals[j]); + } +} + static void icmpmsg_put(struct seq_file *seq) { #define PERLINE 16 - int j, i, count; - static int out[PERLINE]; + int i, count; + unsigned short type[PERLINE]; + unsigned long vals[PERLINE], val; struct net *net = seq->private; count = 0; for (i = 0; i < ICMPMSG_MIB_MAX; i++) { - - if (snmp_fold_field((void **) net->mib.icmpmsg_statistics, i)) - out[count++] = i; - if (count < PERLINE) - continue; - - seq_printf(seq, "\nIcmpMsg:"); - for (j = 0; j < PERLINE; ++j) - seq_printf(seq, " %sType%u", i & 0x100 ? "Out" : "In", - i & 0xff); - seq_printf(seq, "\nIcmpMsg: "); - for (j = 0; j < PERLINE; ++j) - seq_printf(seq, " %lu", - snmp_fold_field((void **) net->mib.icmpmsg_statistics, - out[j])); - seq_putc(seq, '\n'); - } - if (count) { - seq_printf(seq, "\nIcmpMsg:"); - for (j = 0; j < count; ++j) - seq_printf(seq, " %sType%u", out[j] & 0x100 ? "Out" : - "In", out[j] & 0xff); - seq_printf(seq, "\nIcmpMsg:"); - for (j = 0; j < count; ++j) - seq_printf(seq, " %lu", snmp_fold_field((void **) - net->mib.icmpmsg_statistics, out[j])); + val = snmp_fold_field((void **) net->mib.icmpmsg_statistics, i); + if (val) { + type[count] = i; + vals[count++] = val; + } + if (count == PERLINE) { + icmpmsg_put_line(seq, vals, type, count); + count = 0; + } } + icmpmsg_put_line(seq, vals, type, count); #undef PERLINE } -- cgit v1.2.3-70-g09d2 From 5cd33db2120b5ce972568711156f91da83bff2d7 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 10 Nov 2008 21:45:05 -0800 Subject: net: fix setting of skb->tail in skb_recycle_check() Since skb_reset_tail_pointer() reads skb->data, we need to set skb->data before calling skb_reset_tail_pointer(). This was causing spurious skb_over_panic()s from skb_put() being called on a recycled skb that had its skb->tail set to beyond where it should have been. Bug report from Peter van Valderen . Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- net/core/skbuff.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index ebb6b94f8af..d49ef8301b5 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -486,8 +486,8 @@ int skb_recycle_check(struct sk_buff *skb, int skb_size) shinfo->frag_list = NULL; memset(skb, 0, offsetof(struct sk_buff, tail)); - skb_reset_tail_pointer(skb); skb->data = skb->head + NET_SKB_PAD; + skb_reset_tail_pointer(skb); return 1; } -- cgit v1.2.3-70-g09d2 From 14ee6742b1b5df275cd2d771b4562b4f808c9419 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 10 Nov 2008 21:52:42 -0800 Subject: dsa: fix skb->pkt_type when mac address of slave interface differs When a dsa slave interface has a mac address that differs from that of the master interface, eth_type_trans() won't explicitly set skb->pkt_type back to PACKET_HOST -- we need to do this ourselves before calling eth_type_trans(). Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- net/dsa/tag_dsa.c | 1 + net/dsa/tag_edsa.c | 1 + net/dsa/tag_trailer.c | 1 + 3 files changed, 3 insertions(+) diff --git a/net/dsa/tag_dsa.c b/net/dsa/tag_dsa.c index bdc0510b53b..31866543332 100644 --- a/net/dsa/tag_dsa.c +++ b/net/dsa/tag_dsa.c @@ -159,6 +159,7 @@ static int dsa_rcv(struct sk_buff *skb, struct net_device *dev, skb->dev = ds->ports[source_port]; skb_push(skb, ETH_HLEN); + skb->pkt_type = PACKET_HOST; skb->protocol = eth_type_trans(skb, skb->dev); skb->dev->last_rx = jiffies; diff --git a/net/dsa/tag_edsa.c b/net/dsa/tag_edsa.c index f985ea99384..9f4ce55eae5 100644 --- a/net/dsa/tag_edsa.c +++ b/net/dsa/tag_edsa.c @@ -178,6 +178,7 @@ static int edsa_rcv(struct sk_buff *skb, struct net_device *dev, skb->dev = ds->ports[source_port]; skb_push(skb, ETH_HLEN); + skb->pkt_type = PACKET_HOST; skb->protocol = eth_type_trans(skb, skb->dev); skb->dev->last_rx = jiffies; diff --git a/net/dsa/tag_trailer.c b/net/dsa/tag_trailer.c index d3117764b2c..efd26697e71 100644 --- a/net/dsa/tag_trailer.c +++ b/net/dsa/tag_trailer.c @@ -95,6 +95,7 @@ static int trailer_rcv(struct sk_buff *skb, struct net_device *dev, skb->dev = ds->ports[source_port]; skb_push(skb, ETH_HLEN); + skb->pkt_type = PACKET_HOST; skb->protocol = eth_type_trans(skb, skb->dev); skb->dev->last_rx = jiffies; -- cgit v1.2.3-70-g09d2 From df02c6ff2e3937379b31ea161b53229134fe92f7 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 10 Nov 2008 21:53:12 -0800 Subject: dsa: fix master interface allmulti/promisc handling Before commit b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 ("net: only invoke dev->change_rx_flags when device is UP"), the dsa driver could sort-of get away with only fiddling with the master interface's allmulti/promisc counts in ->change_rx_flags() and not touching them in ->open() or ->stop(). After this commit (note that it was merged almost simultaneously with the dsa patches, which is why this wasn't caught initially), the breakage that was already there became more apparent. Since it makes no sense to keep the master interface's allmulti or promisc count pinned for a slave interface that is down, copy the vlan driver's sync logic (which does exactly what we want) over to dsa to fix this. Bug report from Dirk Teurlings and Peter van Valderen . Signed-off-by: Lennert Buytenhek Tested-by: Dirk Teurlings Tested-by: Peter van Valderen Signed-off-by: David S. Miller --- net/dsa/slave.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 70 insertions(+), 2 deletions(-) diff --git a/net/dsa/slave.c b/net/dsa/slave.c index 37616884b8a..1af5a79309e 100644 --- a/net/dsa/slave.c +++ b/net/dsa/slave.c @@ -10,6 +10,7 @@ #include #include +#include #include #include "dsa_priv.h" @@ -49,11 +50,57 @@ void dsa_slave_mii_bus_init(struct dsa_switch *ds) /* slave device handling ****************************************************/ static int dsa_slave_open(struct net_device *dev) { + struct dsa_slave_priv *p = netdev_priv(dev); + struct net_device *master = p->parent->master_netdev; + int err; + + if (!(master->flags & IFF_UP)) + return -ENETDOWN; + + if (compare_ether_addr(dev->dev_addr, master->dev_addr)) { + err = dev_unicast_add(master, dev->dev_addr, ETH_ALEN); + if (err < 0) + goto out; + } + + if (dev->flags & IFF_ALLMULTI) { + err = dev_set_allmulti(master, 1); + if (err < 0) + goto del_unicast; + } + if (dev->flags & IFF_PROMISC) { + err = dev_set_promiscuity(master, 1); + if (err < 0) + goto clear_allmulti; + } + return 0; + +clear_allmulti: + if (dev->flags & IFF_ALLMULTI) + dev_set_allmulti(master, -1); +del_unicast: + if (compare_ether_addr(dev->dev_addr, master->dev_addr)) + dev_unicast_delete(master, dev->dev_addr, ETH_ALEN); +out: + return err; } static int dsa_slave_close(struct net_device *dev) { + struct dsa_slave_priv *p = netdev_priv(dev); + struct net_device *master = p->parent->master_netdev; + + dev_mc_unsync(master, dev); + dev_unicast_unsync(master, dev); + if (dev->flags & IFF_ALLMULTI) + dev_set_allmulti(master, -1); + if (dev->flags & IFF_PROMISC) + dev_set_promiscuity(master, -1); + + if (compare_ether_addr(dev->dev_addr, master->dev_addr)) + dev_unicast_delete(master, dev->dev_addr, ETH_ALEN); + return 0; } @@ -77,9 +124,30 @@ static void dsa_slave_set_rx_mode(struct net_device *dev) dev_unicast_sync(master, dev); } -static int dsa_slave_set_mac_address(struct net_device *dev, void *addr) +static int dsa_slave_set_mac_address(struct net_device *dev, void *a) { - memcpy(dev->dev_addr, addr + 2, 6); + struct dsa_slave_priv *p = netdev_priv(dev); + struct net_device *master = p->parent->master_netdev; + struct sockaddr *addr = a; + int err; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + if (!(dev->flags & IFF_UP)) + goto out; + + if (compare_ether_addr(addr->sa_data, master->dev_addr)) { + err = dev_unicast_add(master, addr->sa_data, ETH_ALEN); + if (err < 0) + return err; + } + + if (compare_ether_addr(dev->dev_addr, master->dev_addr)) + dev_unicast_delete(master, dev->dev_addr, ETH_ALEN); + +out: + memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); return 0; } -- cgit v1.2.3-70-g09d2 From ad474caca3e2a0550b7ce0706527ad5ab389a4d4 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 10 Nov 2008 15:39:30 +0100 Subject: fix for account_group_exec_runtime(), make sure ->signal can't be freed under rq->lock Impact: fix hang/crash on ia64 under high load This is ugly, but the simplest patch by far. Unlike other similar routines, account_group_exec_runtime() could be called "implicitly" from within scheduler after exit_notify(). This means we can race with the parent doing release_task(), we can't just check ->signal != NULL. Change __exit_signal() to do spin_unlock_wait(&task_rq(tsk)->lock) before __cleanup_signal() to make sure ->signal can't be freed under task_rq(tsk)->lock. Note that task_rq_unlock_wait() doesn't care about the case when tsk changes cpu/rq under us, this should be OK. Thanks to Ingo who nacked my previous buggy patch. Signed-off-by: Oleg Nesterov Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar Reported-by: Doug Chapman --- include/linux/sched.h | 1 + kernel/exit.c | 5 +++++ kernel/sched.c | 8 ++++++++ 3 files changed, 14 insertions(+) diff --git a/include/linux/sched.h b/include/linux/sched.h index 295b7c756ca..644ffbda17c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -247,6 +247,7 @@ extern void init_idle(struct task_struct *idle, int cpu); extern void init_idle_bootup_task(struct task_struct *idle); extern int runqueue_is_locked(void); +extern void task_rq_unlock_wait(struct task_struct *p); extern cpumask_t nohz_cpu_mask; #if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ) diff --git a/kernel/exit.c b/kernel/exit.c index 80137a5d946..ae2b92be5fa 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -141,6 +141,11 @@ static void __exit_signal(struct task_struct *tsk) if (sig) { flush_sigqueue(&sig->shared_pending); taskstats_tgid_free(sig); + /* + * Make sure ->signal can't go away under rq->lock, + * see account_group_exec_runtime(). + */ + task_rq_unlock_wait(tsk); __cleanup_signal(sig); } } diff --git a/kernel/sched.c b/kernel/sched.c index f3149244e32..50a21f96467 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -969,6 +969,14 @@ static struct rq *task_rq_lock(struct task_struct *p, unsigned long *flags) } } +void task_rq_unlock_wait(struct task_struct *p) +{ + struct rq *rq = task_rq(p); + + smp_mb(); /* spin-unlock-wait is not a full memory barrier */ + spin_unlock_wait(&rq->lock); +} + static void __task_rq_unlock(struct rq *rq) __releases(rq->lock) { -- cgit v1.2.3-70-g09d2 From 881ee9889c8b98671c5491e43666bf5d4f78a180 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 2 Nov 2008 23:08:44 -0800 Subject: i915: Save/restore MCHBAR_RENDER_STANDBY on GM965/GM45 This register is set by the 2D driver to prevent lockups, and so it needs to be preserved across suspend/resume too. This makes my X200s work. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_reg.h | 3 +++ drivers/gpu/drm/i915/i915_suspend.c | 9 +++++++++ 3 files changed, 13 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 572dcd0e3e0..be56b0ba88c 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -157,6 +157,7 @@ typedef struct drm_i915_private { u32 saveDSPACNTR; u32 saveDSPBCNTR; u32 saveDSPARB; + u32 saveRENDERSTANDBY; u32 savePIPEACONF; u32 savePIPEBCONF; u32 savePIPEASRC; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5c2d9f206d0..0e476eba36e 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -527,6 +527,9 @@ #define C0DRB3 0x10206 #define C1DRB3 0x10606 +/** GM965 GM45 render standby register */ +#define MCHBAR_RENDER_STANDBY 0x111B8 + /* * Overlay regs */ diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 603fe742ccd..5ddc6e595c0 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -240,6 +240,10 @@ int i915_save_state(struct drm_device *dev) pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB); + /* Render Standby */ + if (IS_I965G(dev) && IS_MOBILE(dev)) + dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY); + /* Display arbitration control */ dev_priv->saveDSPARB = I915_READ(DSPARB); @@ -365,6 +369,11 @@ int i915_restore_state(struct drm_device *dev) pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB); + /* Render Standby */ + if (IS_I965G(dev) && IS_MOBILE(dev)) + I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY); + + /* Display arbitration */ I915_WRITE(DSPARB, dev_priv->saveDSPARB); /* Pipe & plane A info */ -- cgit v1.2.3-70-g09d2 From ad42ca8f4490de06462aee234ea0083cbd8b46aa Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 2 Nov 2008 23:38:20 -0800 Subject: i915: Clean up sarea pointers on leavevt This corresponds to the setup of the sarea pointers in DMA initialization, though neither is exactly the point at which the sarea is set up or torn down. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 256e22963ae..79944460d70 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -154,6 +154,9 @@ static int i915_dma_cleanup(struct drm_device * dev) if (I915_NEED_GFX_HWS(dev)) i915_free_hws(dev); + dev_priv->sarea = NULL; + dev_priv->sarea_priv = NULL; + return 0; } -- cgit v1.2.3-70-g09d2 From 6a47baa6ce7e6fb5fed8d1fd0af36a96a4ad133f Mon Sep 17 00:00:00 2001 From: Owen Taylor Date: Mon, 3 Nov 2008 14:38:17 -0800 Subject: i915: Don't attempt to short-circuit object_wait_rendering by checking domains. This could return early when reading after writing a buffer, if somebody had already put it on the flushing list (write domains are 0, but still active), leading to glReadPixels failure. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index b0ec73fa6a9..6b4a2bd2064 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1455,11 +1455,9 @@ i915_gem_object_set_domain_range(struct drm_gem_object *obj, read_domains, write_domain); /* Wait on any GPU rendering to the object to be flushed. */ - if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) { - ret = i915_gem_object_wait_rendering(obj); - if (ret) - return ret; - } + ret = i915_gem_object_wait_rendering(obj); + if (ret) + return ret; if (obj_priv->page_cpu_valid == NULL) { obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE, -- cgit v1.2.3-70-g09d2 From d3e74d0237b102d34979015fbf6df02ca4413074 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 3 Nov 2008 14:46:17 -0800 Subject: i915: Don't whine when pci_enable_msi() fails. This probably just means the chipset doesn't support MSI, which is fine. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 79944460d70..9d4278be0ca 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -852,8 +852,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) * be lost or delayed */ if (!IS_I945G(dev) && !IS_I945GM(dev) && !IS_I965GM(dev)) - if (pci_enable_msi(dev->pdev)) - DRM_ERROR("failed to enable MSI\n"); + pci_enable_msi(dev->pdev); intel_opregion_init(dev); -- cgit v1.2.3-70-g09d2 From bd95e0a4a6bb9485fe35dda62719663f6ceabae1 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 4 Nov 2008 12:01:24 -0800 Subject: i915: Remove racy delayed vblank swap ioctl. When userland detected that this ioctl was supported (by version number check), it used it in a racy way -- dispatch delayed swap, wait for vblank, continue rendering. As there was no mechanism for it to wait for the swap to finish, sometimes it would render before the swap and garbage would be displayed on the screen. By removing the ioctl and returning -EINVAL, userland returns to its previous, correct rendering path of waiting for a vblank then dispatching a swap. The only path that could have used this ioctl correctly was page flipping, which relied on only one client running and emitting wait-for-vblank-before-rendering in the command stream. That path also falls back correctly, at the performance cost of not being able to queue up rendering before the flip occurs. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_drv.h | 15 -- drivers/gpu/drm/i915/i915_irq.c | 377 ++-------------------------------------- 2 files changed, 14 insertions(+), 378 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index be56b0ba88c..4afbadb1331 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -88,13 +88,6 @@ struct mem_block { struct drm_file *file_priv; /* NULL: free, -1: heap, other: real files */ }; -typedef struct _drm_i915_vbl_swap { - struct list_head head; - drm_drawable_t drw_id; - unsigned int pipe; - unsigned int sequence; -} drm_i915_vbl_swap_t; - struct opregion_header; struct opregion_acpi; struct opregion_swsci; @@ -146,10 +139,6 @@ typedef struct drm_i915_private { unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds; int vblank_pipe; - spinlock_t swaps_lock; - drm_i915_vbl_swap_t vbl_swaps; - unsigned int swaps_pending; - struct intel_opregion opregion; /* Register state */ @@ -242,9 +231,6 @@ typedef struct drm_i915_private { u8 saveDACDATA[256*3]; /* 256 3-byte colors */ u8 saveCR[37]; - /** Work task for vblank-related ring access */ - struct work_struct vblank_work; - struct { struct drm_mm gtt_space; @@ -445,7 +431,6 @@ extern int i915_irq_wait(struct drm_device *dev, void *data, void i915_user_irq_get(struct drm_device *dev); void i915_user_irq_put(struct drm_device *dev); -extern void i915_vblank_work_handler(struct work_struct *work); extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS); extern void i915_driver_irq_preinstall(struct drm_device * dev); extern int i915_driver_irq_postinstall(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 26f48932a51..a75345af62e 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -80,211 +80,6 @@ i915_pipe_enabled(struct drm_device *dev, int pipe) return 0; } -/** - * Emit blits for scheduled buffer swaps. - * - * This function will be called with the HW lock held. - * Because this function must grab the ring mutex (dev->struct_mutex), - * it can no longer run at soft irq time. We'll fix this when we do - * the DRI2 swap buffer work. - */ -static void i915_vblank_tasklet(struct drm_device *dev) -{ - drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - unsigned long irqflags; - struct list_head *list, *tmp, hits, *hit; - int nhits, nrects, slice[2], upper[2], lower[2], i; - unsigned counter[2]; - struct drm_drawable_info *drw; - drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv; - u32 cpp = dev_priv->cpp; - u32 cmd = (cpp == 4) ? (XY_SRC_COPY_BLT_CMD | - XY_SRC_COPY_BLT_WRITE_ALPHA | - XY_SRC_COPY_BLT_WRITE_RGB) - : XY_SRC_COPY_BLT_CMD; - u32 src_pitch = sarea_priv->pitch * cpp; - u32 dst_pitch = sarea_priv->pitch * cpp; - u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24); - RING_LOCALS; - - mutex_lock(&dev->struct_mutex); - - if (IS_I965G(dev) && sarea_priv->front_tiled) { - cmd |= XY_SRC_COPY_BLT_DST_TILED; - dst_pitch >>= 2; - } - if (IS_I965G(dev) && sarea_priv->back_tiled) { - cmd |= XY_SRC_COPY_BLT_SRC_TILED; - src_pitch >>= 2; - } - - counter[0] = drm_vblank_count(dev, 0); - counter[1] = drm_vblank_count(dev, 1); - - DRM_DEBUG("\n"); - - INIT_LIST_HEAD(&hits); - - nhits = nrects = 0; - - spin_lock_irqsave(&dev_priv->swaps_lock, irqflags); - - /* Find buffer swaps scheduled for this vertical blank */ - list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) { - drm_i915_vbl_swap_t *vbl_swap = - list_entry(list, drm_i915_vbl_swap_t, head); - int pipe = vbl_swap->pipe; - - if ((counter[pipe] - vbl_swap->sequence) > (1<<23)) - continue; - - list_del(list); - dev_priv->swaps_pending--; - drm_vblank_put(dev, pipe); - - spin_unlock(&dev_priv->swaps_lock); - spin_lock(&dev->drw_lock); - - drw = drm_get_drawable_info(dev, vbl_swap->drw_id); - - list_for_each(hit, &hits) { - drm_i915_vbl_swap_t *swap_cmp = - list_entry(hit, drm_i915_vbl_swap_t, head); - struct drm_drawable_info *drw_cmp = - drm_get_drawable_info(dev, swap_cmp->drw_id); - - /* Make sure both drawables are still - * around and have some rectangles before - * we look inside to order them for the - * blts below. - */ - if (drw_cmp && drw_cmp->num_rects > 0 && - drw && drw->num_rects > 0 && - drw_cmp->rects[0].y1 > drw->rects[0].y1) { - list_add_tail(list, hit); - break; - } - } - - spin_unlock(&dev->drw_lock); - - /* List of hits was empty, or we reached the end of it */ - if (hit == &hits) - list_add_tail(list, hits.prev); - - nhits++; - - spin_lock(&dev_priv->swaps_lock); - } - - if (nhits == 0) { - spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); - mutex_unlock(&dev->struct_mutex); - return; - } - - spin_unlock(&dev_priv->swaps_lock); - - i915_kernel_lost_context(dev); - - if (IS_I965G(dev)) { - BEGIN_LP_RING(4); - - OUT_RING(GFX_OP_DRAWRECT_INFO_I965); - OUT_RING(0); - OUT_RING(((sarea_priv->width - 1) & 0xffff) | ((sarea_priv->height - 1) << 16)); - OUT_RING(0); - ADVANCE_LP_RING(); - } else { - BEGIN_LP_RING(6); - - OUT_RING(GFX_OP_DRAWRECT_INFO); - OUT_RING(0); - OUT_RING(0); - OUT_RING(sarea_priv->width | sarea_priv->height << 16); - OUT_RING(sarea_priv->width | sarea_priv->height << 16); - OUT_RING(0); - - ADVANCE_LP_RING(); - } - - sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT; - - upper[0] = upper[1] = 0; - slice[0] = max(sarea_priv->pipeA_h / nhits, 1); - slice[1] = max(sarea_priv->pipeB_h / nhits, 1); - lower[0] = sarea_priv->pipeA_y + slice[0]; - lower[1] = sarea_priv->pipeB_y + slice[0]; - - spin_lock(&dev->drw_lock); - - /* Emit blits for buffer swaps, partitioning both outputs into as many - * slices as there are buffer swaps scheduled in order to avoid tearing - * (based on the assumption that a single buffer swap would always - * complete before scanout starts). - */ - for (i = 0; i++ < nhits; - upper[0] = lower[0], lower[0] += slice[0], - upper[1] = lower[1], lower[1] += slice[1]) { - if (i == nhits) - lower[0] = lower[1] = sarea_priv->height; - - list_for_each(hit, &hits) { - drm_i915_vbl_swap_t *swap_hit = - list_entry(hit, drm_i915_vbl_swap_t, head); - struct drm_clip_rect *rect; - int num_rects, pipe; - unsigned short top, bottom; - - drw = drm_get_drawable_info(dev, swap_hit->drw_id); - - /* The drawable may have been destroyed since - * the vblank swap was queued - */ - if (!drw) - continue; - - rect = drw->rects; - pipe = swap_hit->pipe; - top = upper[pipe]; - bottom = lower[pipe]; - - for (num_rects = drw->num_rects; num_rects--; rect++) { - int y1 = max(rect->y1, top); - int y2 = min(rect->y2, bottom); - - if (y1 >= y2) - continue; - - BEGIN_LP_RING(8); - - OUT_RING(cmd); - OUT_RING(ropcpp | dst_pitch); - OUT_RING((y1 << 16) | rect->x1); - OUT_RING((y2 << 16) | rect->x2); - OUT_RING(sarea_priv->front_offset); - OUT_RING((y1 << 16) | rect->x1); - OUT_RING(src_pitch); - OUT_RING(sarea_priv->back_offset); - - ADVANCE_LP_RING(); - } - } - } - - spin_unlock_irqrestore(&dev->drw_lock, irqflags); - mutex_unlock(&dev->struct_mutex); - - list_for_each_safe(hit, tmp, &hits) { - drm_i915_vbl_swap_t *swap_hit = - list_entry(hit, drm_i915_vbl_swap_t, head); - - list_del(hit); - - drm_free(swap_hit, sizeof(*swap_hit), DRM_MEM_DRIVER); - } -} - /* Called from drm generic code, passed a 'crtc', which * we use as a pipe index */ @@ -322,40 +117,6 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) return count; } -void -i915_vblank_work_handler(struct work_struct *work) -{ - drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, - vblank_work); - struct drm_device *dev = dev_priv->dev; - unsigned long irqflags; - - if (dev->lock.hw_lock == NULL) { - i915_vblank_tasklet(dev); - return; - } - - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - dev->locked_tasklet_func = i915_vblank_tasklet; - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - - /* Try to get the lock now, if this fails, the lock - * holder will execute the tasklet during unlock - */ - if (!drm_lock_take(&dev->lock, DRM_KERNEL_CONTEXT)) - return; - - dev->lock.lock_time = jiffies; - atomic_inc(&dev->counts[_DRM_STAT_LOCKS]); - - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - dev->locked_tasklet_func = NULL; - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - - i915_vblank_tasklet(dev); - drm_lock_free(&dev->lock, DRM_KERNEL_CONTEXT); -} - irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; @@ -433,9 +194,6 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) if (iir & I915_ASLE_INTERRUPT) opregion_asle_intr(dev); - if (vblank && dev_priv->swaps_pending > 0) - schedule_work(&dev_priv->vblank_work); - return IRQ_HANDLED; } @@ -696,123 +454,21 @@ int i915_vblank_pipe_get(struct drm_device *dev, void *data, int i915_vblank_swap(struct drm_device *dev, void *data, struct drm_file *file_priv) { - drm_i915_private_t *dev_priv = dev->dev_private; - drm_i915_vblank_swap_t *swap = data; - drm_i915_vbl_swap_t *vbl_swap, *vbl_old; - unsigned int pipe, seqtype, curseq; - unsigned long irqflags; - struct list_head *list; - int ret; - - if (!dev_priv || !dev_priv->sarea_priv) { - DRM_ERROR("%s called with no initialization\n", __func__); - return -EINVAL; - } - - if (dev_priv->sarea_priv->rotation) { - DRM_DEBUG("Rotation not supported\n"); - return -EINVAL; - } - - if (swap->seqtype & ~(_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE | - _DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS)) { - DRM_ERROR("Invalid sequence type 0x%x\n", swap->seqtype); - return -EINVAL; - } - - pipe = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0; - - seqtype = swap->seqtype & (_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE); - - if (!(dev_priv->vblank_pipe & (1 << pipe))) { - DRM_ERROR("Invalid pipe %d\n", pipe); - return -EINVAL; - } - - spin_lock_irqsave(&dev->drw_lock, irqflags); - - if (!drm_get_drawable_info(dev, swap->drawable)) { - spin_unlock_irqrestore(&dev->drw_lock, irqflags); - DRM_DEBUG("Invalid drawable ID %d\n", swap->drawable); - return -EINVAL; - } - - spin_unlock_irqrestore(&dev->drw_lock, irqflags); - - /* - * We take the ref here and put it when the swap actually completes - * in the tasklet. + /* The delayed swap mechanism was fundamentally racy, and has been + * removed. The model was that the client requested a delayed flip/swap + * from the kernel, then waited for vblank before continuing to perform + * rendering. The problem was that the kernel might wake the client + * up before it dispatched the vblank swap (since the lock has to be + * held while touching the ringbuffer), in which case the client would + * clear and start the next frame before the swap occurred, and + * flicker would occur in addition to likely missing the vblank. + * + * In the absence of this ioctl, userland falls back to a correct path + * of waiting for a vblank, then dispatching the swap on its own. + * Context switching to userland and back is plenty fast enough for + * meeting the requirements of vblank swapping. */ - ret = drm_vblank_get(dev, pipe); - if (ret) - return ret; - curseq = drm_vblank_count(dev, pipe); - - if (seqtype == _DRM_VBLANK_RELATIVE) - swap->sequence += curseq; - - if ((curseq - swap->sequence) <= (1<<23)) { - if (swap->seqtype & _DRM_VBLANK_NEXTONMISS) { - swap->sequence = curseq + 1; - } else { - DRM_DEBUG("Missed target sequence\n"); - drm_vblank_put(dev, pipe); - return -EINVAL; - } - } - - vbl_swap = drm_calloc(1, sizeof(*vbl_swap), DRM_MEM_DRIVER); - - if (!vbl_swap) { - DRM_ERROR("Failed to allocate memory to queue swap\n"); - drm_vblank_put(dev, pipe); - return -ENOMEM; - } - - vbl_swap->drw_id = swap->drawable; - vbl_swap->pipe = pipe; - vbl_swap->sequence = swap->sequence; - - spin_lock_irqsave(&dev_priv->swaps_lock, irqflags); - - list_for_each(list, &dev_priv->vbl_swaps.head) { - vbl_old = list_entry(list, drm_i915_vbl_swap_t, head); - - if (vbl_old->drw_id == swap->drawable && - vbl_old->pipe == pipe && - vbl_old->sequence == swap->sequence) { - spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); - drm_vblank_put(dev, pipe); - drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER); - DRM_DEBUG("Already scheduled\n"); - return 0; - } - } - - if (dev_priv->swaps_pending >= 10) { - DRM_DEBUG("Too many swaps queued\n"); - DRM_DEBUG(" pipe 0: %d pipe 1: %d\n", - drm_vblank_count(dev, 0), - drm_vblank_count(dev, 1)); - - list_for_each(list, &dev_priv->vbl_swaps.head) { - vbl_old = list_entry(list, drm_i915_vbl_swap_t, head); - DRM_DEBUG("\tdrw %x pipe %d seq %x\n", - vbl_old->drw_id, vbl_old->pipe, - vbl_old->sequence); - } - spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); - drm_vblank_put(dev, pipe); - drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER); - return -EBUSY; - } - - list_add_tail(&vbl_swap->head, &dev_priv->vbl_swaps.head); - dev_priv->swaps_pending++; - - spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); - - return 0; + return -EINVAL; } /* drm_dma.h hooks @@ -831,11 +487,6 @@ int i915_driver_irq_postinstall(struct drm_device *dev) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int ret, num_pipes = 2; - spin_lock_init(&dev_priv->swaps_lock); - INIT_LIST_HEAD(&dev_priv->vbl_swaps.head); - INIT_WORK(&dev_priv->vblank_work, i915_vblank_work_handler); - dev_priv->swaps_pending = 0; - /* Set initial unmasked IRQs to just the selected vblank pipes. */ dev_priv->irq_mask_reg = ~0; -- cgit v1.2.3-70-g09d2 From 5d8e6bb7a20b6206e1fe44565efc383a941b81fa Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 4 Nov 2008 18:36:29 -0800 Subject: drm: Remove infrastructure for supporting i915's vblank swapping. It's not used in any other drivers, and doesn't look like it will be from drm.git master. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 80 ---------------------------------------------- drivers/gpu/drm/drm_lock.c | 9 ------ drivers/gpu/drm/drm_stub.c | 1 - include/drm/drmP.h | 5 --- 4 files changed, 95 deletions(-) diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 212a94f715b..15c8dabc3e9 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -280,8 +280,6 @@ int drm_irq_uninstall(struct drm_device * dev) drm_vblank_cleanup(dev); - dev->locked_tasklet_func = NULL; - return 0; } EXPORT_SYMBOL(drm_irq_uninstall); @@ -699,81 +697,3 @@ void drm_handle_vblank(struct drm_device *dev, int crtc) drm_vbl_send_signals(dev, crtc); } EXPORT_SYMBOL(drm_handle_vblank); - -/** - * Tasklet wrapper function. - * - * \param data DRM device in disguise. - * - * Attempts to grab the HW lock and calls the driver callback on success. On - * failure, leave the lock marked as contended so the callback can be called - * from drm_unlock(). - */ -static void drm_locked_tasklet_func(unsigned long data) -{ - struct drm_device *dev = (struct drm_device *)data; - unsigned long irqflags; - void (*tasklet_func)(struct drm_device *); - - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - tasklet_func = dev->locked_tasklet_func; - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - - if (!tasklet_func || - !drm_lock_take(&dev->lock, - DRM_KERNEL_CONTEXT)) { - return; - } - - dev->lock.lock_time = jiffies; - atomic_inc(&dev->counts[_DRM_STAT_LOCKS]); - - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - tasklet_func = dev->locked_tasklet_func; - dev->locked_tasklet_func = NULL; - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - - if (tasklet_func != NULL) - tasklet_func(dev); - - drm_lock_free(&dev->lock, - DRM_KERNEL_CONTEXT); -} - -/** - * Schedule a tasklet to call back a driver hook with the HW lock held. - * - * \param dev DRM device. - * \param func Driver callback. - * - * This is intended for triggering actions that require the HW lock from an - * interrupt handler. The lock will be grabbed ASAP after the interrupt handler - * completes. Note that the callback may be called from interrupt or process - * context, it must not make any assumptions about this. Also, the HW lock will - * be held with the kernel context or any client context. - */ -void drm_locked_tasklet(struct drm_device *dev, void (*func)(struct drm_device *)) -{ - unsigned long irqflags; - static DECLARE_TASKLET(drm_tasklet, drm_locked_tasklet_func, 0); - - if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ) || - test_bit(TASKLET_STATE_SCHED, &drm_tasklet.state)) - return; - - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - - if (dev->locked_tasklet_func) { - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - return; - } - - dev->locked_tasklet_func = func; - - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - - drm_tasklet.data = (unsigned long)dev; - - tasklet_hi_schedule(&drm_tasklet); -} -EXPORT_SYMBOL(drm_locked_tasklet); diff --git a/drivers/gpu/drm/drm_lock.c b/drivers/gpu/drm/drm_lock.c index 888159e03d2..1cfa72031f8 100644 --- a/drivers/gpu/drm/drm_lock.c +++ b/drivers/gpu/drm/drm_lock.c @@ -154,8 +154,6 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv) int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_lock *lock = data; - unsigned long irqflags; - void (*tasklet_func)(struct drm_device *); if (lock->context == DRM_KERNEL_CONTEXT) { DRM_ERROR("Process %d using kernel context %d\n", @@ -163,13 +161,6 @@ int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv) return -EINVAL; } - spin_lock_irqsave(&dev->tasklet_lock, irqflags); - tasklet_func = dev->locked_tasklet_func; - dev->locked_tasklet_func = NULL; - spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - if (tasklet_func != NULL) - tasklet_func(dev); - atomic_inc(&dev->counts[_DRM_STAT_UNLOCKS]); /* kernel_context_switch isn't used by any of the x86 drm diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index 141e33004a7..66c96ec6667 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -92,7 +92,6 @@ static int drm_fill_in_dev(struct drm_device * dev, struct pci_dev *pdev, spin_lock_init(&dev->count_lock); spin_lock_init(&dev->drw_lock); - spin_lock_init(&dev->tasklet_lock); spin_lock_init(&dev->lock.spinlock); init_timer(&dev->timer); mutex_init(&dev->struct_mutex); diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 59c796b46ee..28c7f1679d4 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -861,8 +861,6 @@ struct drm_device { struct timer_list vblank_disable_timer; u32 max_vblank_count; /**< size of vblank counter register */ - spinlock_t tasklet_lock; /**< For drm_locked_tasklet */ - void (*locked_tasklet_func)(struct drm_device *dev); /*@} */ cycles_t ctx_start; @@ -1149,8 +1147,6 @@ extern int drm_vblank_init(struct drm_device *dev, int num_crtcs); extern int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *filp); extern int drm_vblank_wait(struct drm_device *dev, unsigned int *vbl_seq); -extern void drm_locked_tasklet(struct drm_device *dev, - void(*func)(struct drm_device *)); extern u32 drm_vblank_count(struct drm_device *dev, int crtc); extern void drm_handle_vblank(struct drm_device *dev, int crtc); extern int drm_vblank_get(struct drm_device *dev, int crtc); @@ -1158,7 +1154,6 @@ extern void drm_vblank_put(struct drm_device *dev, int crtc); /* Modesetting support */ extern int drm_modeset_ctl(struct drm_device *dev, void *data, struct drm_file *file_priv); -extern void drm_locked_tasklet(struct drm_device *dev, void(*func)(struct drm_device*)); /* AGP/GART support (drm_agpsupport.h) */ extern struct drm_agp_head *drm_agp_init(struct drm_device *dev); -- cgit v1.2.3-70-g09d2 From 78538bf14995a136c2d9a22159ada49937359119 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 11 Nov 2008 17:56:16 +1000 Subject: drm/radeon: map registers at load time Now that the radeon driver has suspend/resume functions, it needs to map its registers at load time or it will likely crash if a suspend operation occurs before the driver has been initialized. This patch moves the register mapping code from firstopen to load and makes the mapping into a _DRM_DRIVER one so that the core won't remove it at lastclose time. Fixes (at least partially) kernel bz #11891. Signed-off-by: Jesse Barnes Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_cp.c | 15 +++++++++------ drivers/gpu/drm/radeon/radeon_drv.h | 2 +- 2 files changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 073894824e6..abdc1ae3846 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -1751,6 +1751,12 @@ int radeon_driver_load(struct drm_device *dev, unsigned long flags) else dev_priv->flags |= RADEON_IS_PCI; + ret = drm_addmap(dev, drm_get_resource_start(dev, 2), + drm_get_resource_len(dev, 2), _DRM_REGISTERS, + _DRM_READ_ONLY | _DRM_DRIVER, &dev_priv->mmio); + if (ret != 0) + return ret; + DRM_DEBUG("%s card detected\n", ((dev_priv->flags & RADEON_IS_AGP) ? "AGP" : (((dev_priv->flags & RADEON_IS_PCIE) ? "PCIE" : "PCI")))); return ret; @@ -1767,12 +1773,6 @@ int radeon_driver_firstopen(struct drm_device *dev) dev_priv->gart_info.table_size = RADEON_PCIGART_TABLE_SIZE; - ret = drm_addmap(dev, drm_get_resource_start(dev, 2), - drm_get_resource_len(dev, 2), _DRM_REGISTERS, - _DRM_READ_ONLY, &dev_priv->mmio); - if (ret != 0) - return ret; - dev_priv->fb_aper_offset = drm_get_resource_start(dev, 0); ret = drm_addmap(dev, dev_priv->fb_aper_offset, drm_get_resource_len(dev, 0), _DRM_FRAME_BUFFER, @@ -1788,6 +1788,9 @@ int radeon_driver_unload(struct drm_device *dev) drm_radeon_private_t *dev_priv = dev->dev_private; DRM_DEBUG("\n"); + + drm_rmmap(dev, dev_priv->mmio); + drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER); dev->dev_private = NULL; diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 02f5575ba39..7a183789be9 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -287,7 +287,6 @@ typedef struct drm_radeon_private { unsigned long gart_textures_offset; drm_local_map_t *sarea; - drm_local_map_t *mmio; drm_local_map_t *cp_ring; drm_local_map_t *ring_rptr; drm_local_map_t *gart_textures; @@ -318,6 +317,7 @@ typedef struct drm_radeon_private { int num_gb_pipes; int track_flush; + drm_local_map_t *mmio; } drm_radeon_private_t; typedef struct drm_radeon_buf_priv { -- cgit v1.2.3-70-g09d2 From bd6b52a17b9af630c38bb4f89609be5654d71e1e Mon Sep 17 00:00:00 2001 From: Qinghuang Feng Date: Sat, 8 Nov 2008 16:32:02 +0800 Subject: [libata] pata_cs553*.c: cleanup kernel-doc No arguments named @deadline in cs5535_cable_detect() and cs5536_cable_detect(). Remove them. Signed-off-by: Qinghuang Feng Signed-off-by: Jeff Garzik --- drivers/ata/pata_cs5535.c | 1 - drivers/ata/pata_cs5536.c | 1 - 2 files changed, 2 deletions(-) diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 1b2d4a0f5f7..8b236af84c2 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -72,7 +72,6 @@ /** * cs5535_cable_detect - detect cable type * @ap: Port to detect on - * @deadline: deadline jiffies for the operation * * Perform cable detection for ATA66 capable cable. Return a libata * cable type. diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c index 73f8332cb67..afed9297619 100644 --- a/drivers/ata/pata_cs5536.c +++ b/drivers/ata/pata_cs5536.c @@ -110,7 +110,6 @@ static inline int cs5536_write(struct pci_dev *pdev, int reg, int val) /** * cs5536_cable_detect - detect cable type * @ap: Port to detect on - * @deadline: deadline jiffies for the operation * * Perform cable detection for ATA66 capable cable. Return a libata * cable type. -- cgit v1.2.3-70-g09d2 From bc170e656881306d65eb1318c98032e1ab305ee8 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Thu, 6 Nov 2008 08:03:23 -0500 Subject: [libata] pata_sch: notice attached slave devices I posted this last month, but was prompted to do so again in bz#467457 Add capability flag to support slave devices with pata_sch driver. Signed-off-by: Mark Salter Signed-off-by: Jeff Garzik --- drivers/ata/pata_sch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c index c8cc027789f..6aeeeeb3412 100644 --- a/drivers/ata/pata_sch.c +++ b/drivers/ata/pata_sch.c @@ -83,7 +83,7 @@ static struct ata_port_operations sch_pata_ops = { }; static struct ata_port_info sch_port_info = { - .flags = 0, + .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, /* pio0-4 */ .mwdma_mask = ATA_MWDMA2, /* mwdma0-2 */ .udma_mask = ATA_UDMA5, /* udma0-5 */ -- cgit v1.2.3-70-g09d2 From a12d6c9a09c644cb4a35be099eb5124d38e4feb8 Mon Sep 17 00:00:00 2001 From: Marc Pignat Date: Thu, 6 Nov 2008 11:44:34 +0100 Subject: [libata] pata_pcmcia: another memory card support Support for Apacer photo steno pro card. Signed-off-by: Marc Pignat Signed-off-by: Jeff Garzik --- drivers/ata/pata_pcmcia.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 271cb64d429..64b2e2281ee 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -416,6 +416,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), + PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506), PCMCIA_DEVICE_NULL, }; -- cgit v1.2.3-70-g09d2 From 44901a96847b9967c057832b185e2f34ee6a14e5 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 4 Nov 2008 10:34:48 -0800 Subject: libata: Avoid overflow in ata_tf_read_block() when tf->hba_lbal > 127 Phillip O'Donnell pointed out that the same sign extension bug that was fixed in commit ba14a9c2 ("libata: Avoid overflow in ata_tf_to_lba48() when tf->hba_lbal > 127") also appears to exist in ata_tf_read_block(). Fix this by adding a cast to u64. Signed-off-by: Roland Dreier Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 0cd3ad49713..4214bfb13bb 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -612,7 +612,7 @@ u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev) if (tf->flags & ATA_TFLAG_LBA48) { block |= (u64)tf->hob_lbah << 40; block |= (u64)tf->hob_lbam << 32; - block |= tf->hob_lbal << 24; + block |= (u64)tf->hob_lbal << 24; } else block |= (tf->device & 0xf) << 24; -- cgit v1.2.3-70-g09d2 From 19b723218bde79c60a394a3caee9eb156ac2d356 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 4 Nov 2008 17:08:40 +0900 Subject: libata: fix last_reset timestamp handling ehc->last_reset is used to ensure that resets are not issued too close to each other. It's initialized to jiffies minus one minute on EH entry. However, when new links are initialized after PMP is probed, new links have zero for this timestamp resulting in long wait depending on the current jiffies. This patch makes last_set considered iff ATA_EHI_DID_RESET is set, in which case last_reset is always initialized. As an added precaution, WARN_ON() is added so that warning is printed if last_reset is in future. This problem is spotted and debugged by Shane Huang. Signed-off-by: Tejun Heo Cc: Shane Huang Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 8077bdf5d30..32da9a93ce4 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -610,9 +610,6 @@ void ata_scsi_error(struct Scsi_Host *host) if (ata_ncq_enabled(dev)) ehc->saved_ncq_enabled |= 1 << devno; } - - /* set last reset timestamp to some time in the past */ - ehc->last_reset = jiffies - 60 * HZ; } ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS; @@ -2281,17 +2278,21 @@ int ata_eh_reset(struct ata_link *link, int classify, if (link->flags & ATA_LFLAG_NO_SRST) softreset = NULL; - now = jiffies; - deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN); - if (time_before(now, deadline)) - schedule_timeout_uninterruptible(deadline - now); + /* make sure each reset attemp is at least COOL_DOWN apart */ + if (ehc->i.flags & ATA_EHI_DID_RESET) { + now = jiffies; + WARN_ON(time_after(ehc->last_reset, now)); + deadline = ata_deadline(ehc->last_reset, + ATA_EH_RESET_COOL_DOWN); + if (time_before(now, deadline)) + schedule_timeout_uninterruptible(deadline - now); + } spin_lock_irqsave(ap->lock, flags); ap->pflags |= ATA_PFLAG_RESETTING; spin_unlock_irqrestore(ap->lock, flags); ata_eh_about_to_do(link, NULL, ATA_EH_RESET); - ehc->last_reset = jiffies; ata_link_for_each_dev(dev, link) { /* If we issue an SRST then an ATA drive (not ATAPI) @@ -2379,7 +2380,6 @@ int ata_eh_reset(struct ata_link *link, int classify, /* * Perform reset */ - ehc->last_reset = jiffies; if (ata_is_host_link(link)) ata_eh_freeze_port(ap); @@ -2391,6 +2391,7 @@ int ata_eh_reset(struct ata_link *link, int classify, reset == softreset ? "soft" : "hard"); /* mark that this EH session started with reset */ + ehc->last_reset = jiffies; if (reset == hardreset) ehc->i.flags |= ATA_EHI_DID_HARDRESET; else @@ -2535,7 +2536,7 @@ int ata_eh_reset(struct ata_link *link, int classify, ata_eh_done(link, NULL, ATA_EH_RESET); if (slave) ata_eh_done(slave, NULL, ATA_EH_RESET); - ehc->last_reset = jiffies; + ehc->last_reset = jiffies; /* update to completion time */ ehc->i.action |= ATA_EH_REVALIDATE; rc = 0; -- cgit v1.2.3-70-g09d2 From afa21e0584f78964c092981fad94e45d38cda249 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 11 Nov 2008 18:02:12 +1000 Subject: drm/i915: Filter pci devices based on PCI_CLASS_DISPLAY_VGA This fixes hangs on 855-class hardware by avoiding double attachment of the driver due to the stub second head device having the same pci id as the real device. Other DRM drivers probably want this treatment as well, but I'm applying it just to this one for safety. But we should clean up the drm_pciids.h mess now so that each driver has its own pci id list header in its own directory. Lets do that in the next release. Signed-off-by: Eric Anholt Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_drv.c | 10 +++++++++- include/drm/drm_pciids.h | 46 +++++++++++++++++++++++----------------------- 2 files changed, 32 insertions(+), 24 deletions(-) diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 96f416afc3f..3ab1e9cc469 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -266,11 +266,19 @@ int drm_init(struct drm_driver *driver) for (i = 0; driver->pci_driver.id_table[i].vendor != 0; i++) { pid = (struct pci_device_id *)&driver->pci_driver.id_table[i]; + /* Loop around setting up a DRM device for each PCI device + * matching our ID and device class. If we had the internal + * function that pci_get_subsys and pci_get_class used, we'd + * be able to just pass pid in instead of doing a two-stage + * thing. + */ pdev = NULL; - /* pass back in pdev to account for multiple identical cards */ while ((pdev = pci_get_subsys(pid->vendor, pid->device, pid->subvendor, pid->subdevice, pdev)) != NULL) { + if ((pdev->class & pid->class_mask) != pid->class) + continue; + /* stealth mode requires a manual probe */ pci_dev_get(pdev); drm_get_dev(pdev, pid, driver); diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index da04109741e..5165f240aa6 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -395,27 +395,27 @@ {0, 0, 0} #define i915_PCI_IDS \ - {0x8086, 0x3577, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x258a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2592, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x27a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x27ae, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2972, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2982, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2992, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x29a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x29b2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x29c2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x29d2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2a02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2a12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ - {0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x3577, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2562, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2582, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x258a, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2592, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2772, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x27a2, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x27ae, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2972, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2982, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2992, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x29a2, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x29b2, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x29c2, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x29d2, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2a02, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2a12, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2a42, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ + {0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \ {0, 0, 0} -- cgit v1.2.3-70-g09d2 From 0baf823a10bd4131f70e9712d1f02de3c247f1df Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sat, 8 Nov 2008 11:44:14 +1000 Subject: drm/i915: Move legacy breadcrumb out of the reserved status page area Addresses in the hardware status page below index 0x20 are reserved for use by the hardware. The legacy breadcrumb was sitting at index 5. Move it to index 0x21, and make sure everyone uses the defined value instead of hard-coded constants. Signed-off-by: Keith Packard Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 10 ++++------ drivers/gpu/drm/i915/i915_drv.h | 3 ++- drivers/gpu/drm/i915/i915_irq.c | 6 ++---- 3 files changed, 8 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 9d4278be0ca..0d215e38606 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -445,7 +445,7 @@ static void i915_emit_breadcrumb(struct drm_device *dev) BEGIN_LP_RING(4); OUT_RING(MI_STORE_DWORD_INDEX); - OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT); + OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); OUT_RING(dev_priv->counter); OUT_RING(0); ADVANCE_LP_RING(); @@ -576,7 +576,7 @@ static int i915_dispatch_flip(struct drm_device * dev) BEGIN_LP_RING(4); OUT_RING(MI_STORE_DWORD_INDEX); - OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT); + OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); OUT_RING(dev_priv->counter); OUT_RING(0); ADVANCE_LP_RING(); @@ -611,7 +611,6 @@ static int i915_batchbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 *hw_status = dev_priv->hw_status_page; drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *) dev_priv->sarea_priv; drm_i915_batchbuffer_t *batch = data; @@ -637,7 +636,7 @@ static int i915_batchbuffer(struct drm_device *dev, void *data, mutex_unlock(&dev->struct_mutex); if (sarea_priv) - sarea_priv->last_dispatch = (int)hw_status[5]; + sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); return ret; } @@ -645,7 +644,6 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 *hw_status = dev_priv->hw_status_page; drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *) dev_priv->sarea_priv; drm_i915_cmdbuffer_t *cmdbuf = data; @@ -673,7 +671,7 @@ static int i915_cmdbuffer(struct drm_device *dev, void *data, } if (sarea_priv) - sarea_priv->last_dispatch = (int)hw_status[5]; + sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); return 0; } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 4afbadb1331..ef1c0b8f8d0 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -608,8 +608,9 @@ static inline void opregion_enable_asle(struct drm_device *dev) { return; } * The area from dword 0x20 to 0x3ff is available for driver usage. */ #define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg]) -#define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, 5) +#define READ_BREADCRUMB(dev_priv) READ_HWSP(dev_priv, I915_BREADCRUMB_INDEX) #define I915_GEM_HWS_INDEX 0x20 +#define I915_BREADCRUMB_INDEX 0x21 extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index a75345af62e..82752d6177a 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -212,12 +212,10 @@ static int i915_emit_irq(struct drm_device * dev) if (dev_priv->sarea_priv) dev_priv->sarea_priv->last_enqueue = dev_priv->counter; - BEGIN_LP_RING(6); + BEGIN_LP_RING(4); OUT_RING(MI_STORE_DWORD_INDEX); - OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT); + OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT); OUT_RING(dev_priv->counter); - OUT_RING(0); - OUT_RING(0); OUT_RING(MI_USER_INTERRUPT); ADVANCE_LP_RING(); -- cgit v1.2.3-70-g09d2 From 77eb50aefa5dd2337246dce8b66e18e837c1a8bc Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Thu, 6 Nov 2008 00:49:00 +0000 Subject: powerpc: Fix msr check in compat_sys_swapcontext The new context may not be 16-byte aligned, so the real address of the mcontext structure should be read from the uc_regs pointer instead of directly using the (unaligned) uc_mcontext field. Signed-off-by: Andreas Schwab Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/signal_32.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index a6a43103655..b13abf30599 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -941,9 +941,21 @@ long sys_swapcontext(struct ucontext __user *old_ctx, #ifdef CONFIG_PPC64 unsigned long new_msr = 0; - if (new_ctx && - get_user(new_msr, &new_ctx->uc_mcontext.mc_gregs[PT_MSR])) - return -EFAULT; + if (new_ctx) { + struct mcontext __user *mcp; + u32 cmcp; + + /* + * Get pointer to the real mcontext. No need for + * access_ok since we are dealing with compat + * pointers. + */ + if (__get_user(cmcp, &new_ctx->uc_regs)) + return -EFAULT; + mcp = (struct mcontext __user *)(u64)cmcp; + if (__get_user(new_msr, &mcp->mc_gregs[PT_MSR])) + return -EFAULT; + } /* * Check that the context is not smaller than the original * size (with VMX but without VSX) -- cgit v1.2.3-70-g09d2 From cb8fdc69a2a80e81e1280ec58afd2c3217ac8a7f Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Tue, 11 Nov 2008 19:39:26 +1100 Subject: powerpc: Update desktop/server defconfigs Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly took the defaults. This also updates ppc6xx_defconfig, which covers the 6xx/7xx/7xxx-based embedded boards. Signed-off-by: Paul Mackerras --- arch/powerpc/configs/chrp32_defconfig | 159 ++++++++++++++---- arch/powerpc/configs/g5_defconfig | 142 ++++++++++++---- arch/powerpc/configs/iseries_defconfig | 114 +++++++++---- arch/powerpc/configs/maple_defconfig | 142 ++++++++++++---- arch/powerpc/configs/pmac32_defconfig | 160 ++++++++++++++---- arch/powerpc/configs/ppc64_defconfig | 174 +++++++++++++++----- arch/powerpc/configs/ppc6xx_defconfig | 286 ++++++++++++++++++++++++--------- arch/powerpc/configs/pseries_defconfig | 169 ++++++++++++++----- 8 files changed, 1033 insertions(+), 313 deletions(-) diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig index 2e0ef8c1822..63b3c2372ce 100644 --- a/arch/powerpc/configs/chrp32_defconfig +++ b/arch/powerpc/configs/chrp32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:12:40 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:35:37 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -108,7 +108,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -122,10 +124,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -159,6 +158,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -212,6 +212,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -227,15 +229,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -310,7 +312,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -334,10 +335,12 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set # CONFIG_NETFILTER_XT_MATCH_STATE is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_IPTABLES=m @@ -361,6 +364,7 @@ CONFIG_NF_NAT_SIP=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -381,14 +385,8 @@ CONFIG_NF_NAT_SIP=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -443,19 +441,18 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -616,7 +613,23 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -641,6 +654,9 @@ CONFIG_DE4X5=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_AMD8111_ETH is not set @@ -669,6 +685,7 @@ CONFIG_8139TOO=y CONFIG_VIA_RHINE=y # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -690,18 +707,22 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -777,6 +798,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -795,6 +817,7 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=y # @@ -953,6 +976,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -980,6 +1014,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1028,6 +1063,7 @@ CONFIG_FB_ATY_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set CONFIG_FB_3DFX=y @@ -1040,6 +1076,7 @@ CONFIG_FB_3DFX=y # CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set @@ -1083,9 +1120,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1102,6 +1166,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1121,6 +1187,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1128,6 +1196,7 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1149,7 +1218,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1170,6 +1238,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1187,7 +1256,9 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1197,6 +1268,7 @@ CONFIG_USB_STORAGE=m # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1208,12 +1280,18 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +CONFIG_JBD2=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1248,6 +1326,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1349,9 +1428,8 @@ CONFIG_NLS_ISO8859_1=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1404,15 +1482,23 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1421,6 +1507,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y @@ -1435,14 +1522,19 @@ CONFIG_IRQSTACKS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1515,6 +1607,11 @@ CONFIG_CRYPTO_ARC4=m # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index cfa5d053ee5..f85e71ccb98 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:15:06 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:36:30 2008 # CONFIG_PPC64=y @@ -21,7 +21,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_64BIT=y CONFIG_WORD_SIZE=64 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -112,7 +112,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -129,8 +131,6 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -163,6 +163,8 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -233,6 +235,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y @@ -242,7 +246,6 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y -# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -255,14 +258,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_PPC_HAS_HASH_64K is not set # CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=13 @@ -292,6 +296,7 @@ CONFIG_PCI_MSI=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 @@ -336,7 +341,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -367,10 +371,12 @@ CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m @@ -381,6 +387,7 @@ CONFIG_IP_NF_QUEUE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=y @@ -402,11 +409,10 @@ CONFIG_LLC=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -463,19 +469,18 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -658,6 +663,7 @@ CONFIG_SATA_SVW=y # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -744,14 +750,17 @@ CONFIG_SUNGEM=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -768,18 +777,22 @@ CONFIG_TIGON3=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set CONFIG_TR=y CONFIG_IBMOL=y @@ -804,6 +817,7 @@ CONFIG_USB_USBNET=m # CONFIG_USB_NET_AX8817X is not set CONFIG_USB_NET_CDCETHER=m # CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_PLUSB is not set @@ -1015,6 +1029,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1044,6 +1069,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1085,6 +1111,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -1096,6 +1123,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set @@ -1124,6 +1152,7 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1234,15 +1263,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -CONFIG_HID_FF=y CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y CONFIG_LOGITECH_FF=y # CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y CONFIG_THRUSTMASTER_FF=y # CONFIG_ZEROPLUS_FF is not set -CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1259,6 +1309,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1281,6 +1333,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1288,6 +1342,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1309,7 +1364,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1385,6 +1439,7 @@ CONFIG_USB_SERIAL_OMNINET=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1402,7 +1457,9 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1412,6 +1469,7 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1421,14 +1479,20 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set @@ -1438,6 +1502,7 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set CONFIG_XFS_POSIX_ACL=y @@ -1478,6 +1543,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1521,6 +1587,7 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1601,9 +1668,8 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1657,19 +1723,26 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1678,6 +1751,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set CONFIG_IRQSTACKS=y # CONFIG_VIRQ_DEBUG is not set @@ -1689,16 +1763,19 @@ CONFIG_BOOTX_TEXT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m @@ -1772,6 +1849,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index 2c3f13577f4..f925c555508 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:15:49 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:36:38 2008 # CONFIG_PPC64=y @@ -21,7 +21,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=32 CONFIG_64BIT=y CONFIG_WORD_SIZE=64 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -111,7 +111,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -127,8 +129,6 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -161,6 +161,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support @@ -219,6 +220,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_IOMMU_VMERGE=y CONFIG_IOMMU_HELPER=y @@ -226,7 +229,6 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -239,14 +241,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_PPC_HAS_HASH_64K is not set # CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=13 @@ -275,6 +278,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 @@ -319,7 +323,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -349,15 +352,17 @@ CONFIG_NF_CONNTRACK_IRC=m # CONFIG_NF_CONNTRACK_SIP is not set CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m @@ -369,40 +374,44 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set CONFIG_NETFILTER_XT_MATCH_DSCP=m # CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_OWNER=m # CONFIG_NETFILTER_XT_MATCH_POLICY is not set -# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m +# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set # CONFIG_NETFILTER_XT_MATCH_STATE is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m # CONFIG_NETFILTER_XT_MATCH_U32 is not set -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m # CONFIG_IP_NF_MATCH_AH is not set +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -410,8 +419,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m # CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m @@ -421,9 +430,9 @@ CONFIG_NF_NAT_TFTP=m # CONFIG_NF_NAT_H323 is not set # CONFIG_NF_NAT_SIP is not set CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -438,6 +447,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=y @@ -460,14 +470,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -597,6 +601,7 @@ CONFIG_SCSI_IBMVSCSI=m # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -647,6 +652,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_AMD8111_ETH is not set @@ -667,12 +675,12 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_DL2K is not set CONFIG_E1000=m -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -689,18 +697,22 @@ CONFIG_E1000=m # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set CONFIG_TR=y CONFIG_IBMOL=y @@ -837,6 +849,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set + # # Multimedia devices # @@ -877,6 +897,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -886,6 +907,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -895,14 +917,20 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set @@ -916,6 +944,7 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set CONFIG_XFS_POSIX_ACL=y @@ -958,6 +987,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y @@ -1001,6 +1031,7 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set @@ -1067,9 +1098,8 @@ CONFIG_DLM=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1127,19 +1157,26 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1148,6 +1185,7 @@ CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set CONFIG_IRQSTACKS=y # CONFIG_VIRQ_DEBUG is not set @@ -1159,16 +1197,19 @@ CONFIG_IRQSTACKS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m @@ -1242,6 +1283,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 1a3b6423222..045f1b008ce 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:18:58 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:36:45 2008 # CONFIG_PPC64=y @@ -20,7 +20,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=4 CONFIG_64BIT=y CONFIG_WORD_SIZE=64 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -107,7 +107,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -125,8 +127,6 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -159,6 +159,8 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -213,6 +215,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y @@ -221,7 +225,6 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y -# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -234,14 +237,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y +CONFIG_UNEVICTABLE_LRU=y # CONFIG_PPC_HAS_HASH_64K is not set # CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=13 @@ -265,11 +269,12 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 @@ -323,6 +328,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -344,14 +350,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -402,19 +402,18 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set CONFIG_IDE_TASK_IOCTL=y CONFIG_IDE_PROC_FS=y @@ -644,6 +643,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set CONFIG_AMD8111_ETH=y @@ -664,11 +666,11 @@ CONFIG_AMD8111_ETH=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -685,18 +687,22 @@ CONFIG_TIGON3=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -895,6 +901,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -942,9 +959,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -961,6 +1005,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -980,6 +1026,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -987,6 +1035,7 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1070,6 +1119,7 @@ CONFIG_USB_SERIAL_TI=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1087,7 +1137,9 @@ CONFIG_USB_SERIAL_TI=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1097,6 +1149,7 @@ CONFIG_USB_SERIAL_TI=m # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1104,15 +1157,23 @@ CONFIG_USB_SERIAL_TI=m CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set @@ -1146,6 +1207,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1185,6 +1247,7 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1260,9 +1323,8 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1315,21 +1377,28 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y # CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1338,6 +1407,7 @@ CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y @@ -1352,14 +1422,19 @@ CONFIG_BOOTX_TEXT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1432,6 +1507,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index 80481f27013..de9b121820a 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:20:26 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:36:51 2008 # # CONFIG_PPC64 is not set @@ -22,7 +22,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -110,7 +110,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -125,10 +127,6 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -161,6 +159,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # Platform support @@ -232,6 +231,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -246,15 +247,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -362,7 +363,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -392,13 +392,14 @@ CONFIG_NF_CONNTRACK_IRC=m # CONFIG_NF_CONNTRACK_SIP is not set CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m @@ -412,19 +413,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m # CONFIG_NETFILTER_XT_MATCH_STATE is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set @@ -432,20 +436,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -453,8 +457,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m # CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_PROTO_DCCP=m CONFIG_NF_NAT_FTP=m @@ -465,9 +469,9 @@ CONFIG_NF_NAT_TFTP=m # CONFIG_NF_NAT_H323 is not set # CONFIG_NF_NAT_SIP is not set CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -494,6 +498,7 @@ CONFIG_IP_DCCP_TFRC_LIB=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -585,12 +590,11 @@ CONFIG_BT_HCIBFUSB=m # CONFIG_BT_HCIBTUART is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y CONFIG_CFG80211=m CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_MAC80211=m @@ -599,7 +603,9 @@ CONFIG_MAC80211=m # Rate control algorithm selection # CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT="pid" # CONFIG_MAC80211_MESH is not set CONFIG_MAC80211_LEDS=y @@ -663,7 +669,6 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives @@ -671,14 +676,14 @@ CONFIG_BLK_DEV_IDE=y CONFIG_IDE_TIMINGS=y CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECS=m # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDEFLOPPY=y CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -899,6 +904,9 @@ CONFIG_SUNGEM=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_AMD8111_ETH is not set @@ -919,6 +927,7 @@ CONFIG_PCNET32=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -940,18 +949,22 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -964,6 +977,7 @@ CONFIG_WLAN_80211=y # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_AIRO is not set CONFIG_HERMES=m CONFIG_APPLE_AIRPORT=m @@ -1023,6 +1037,7 @@ CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m # CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set CONFIG_USB_NET_NET1080=m # CONFIG_USB_NET_PLUSB is not set @@ -1239,6 +1254,7 @@ CONFIG_POWER_SUPPLY=y CONFIG_APM_POWER=y # CONFIG_BATTERY_DS2760 is not set CONFIG_BATTERY_PMU=y +# CONFIG_BATTERY_BQ27x00 is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -1266,6 +1282,17 @@ CONFIG_SSB_DRIVER_PCICORE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1301,6 +1328,7 @@ CONFIG_VGASTATE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1357,6 +1385,7 @@ CONFIG_FB_ATY_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set CONFIG_FB_3DFX=y @@ -1369,6 +1398,7 @@ CONFIG_FB_3DFX=y # CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set @@ -1401,6 +1431,7 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1514,9 +1545,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT_POWERBOOK=y -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1534,6 +1592,8 @@ CONFIG_USB_DYNAMIC_MINORS=y # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1553,6 +1613,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1560,6 +1622,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1581,7 +1644,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set CONFIG_USB_STORAGE_ONETOUCH=y # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1656,6 +1718,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1673,7 +1736,9 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -1692,6 +1757,7 @@ CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set CONFIG_LEDS_TRIGGER_IDE_DISK=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set @@ -1699,6 +1765,7 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1710,12 +1777,18 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +CONFIG_JBD2=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set @@ -1752,6 +1825,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1794,6 +1868,7 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1870,7 +1945,6 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y @@ -1927,18 +2001,25 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1946,6 +2027,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y @@ -1960,16 +2042,19 @@ CONFIG_BOOTX_TEXT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m @@ -2043,6 +2128,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index fc5930caeb5..069ae1bbac2 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:22:03 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:36:56 2008 # CONFIG_PPC64=y @@ -22,7 +22,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=32 CONFIG_64BIT=y CONFIG_WORD_SIZE=64 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -87,6 +87,7 @@ CONFIG_LOG_BUF_SHIFT=17 CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set # CONFIG_CGROUP_NS is not set +# CONFIG_CGROUP_FREEZER is not set # CONFIG_CGROUP_DEVICE is not set CONFIG_CPUSETS=y # CONFIG_GROUP_SCHED is not set @@ -124,12 +125,15 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -141,8 +145,6 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -175,6 +177,8 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -294,6 +298,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y @@ -303,7 +309,6 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y -# CONFIG_CRASH_DUMP is not set # CONFIG_PHYP_DUMP is not set CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set @@ -318,7 +323,6 @@ CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y @@ -329,8 +333,10 @@ CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_PPC_HAS_HASH_64K=y # CONFIG_PPC_64K_PAGES is not set @@ -379,6 +385,7 @@ CONFIG_HOTPLUG_PCI=m CONFIG_HOTPLUG_PCI_RPA=m CONFIG_HOTPLUG_PCI_RPA_DLPAR=m # CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 @@ -426,7 +433,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -457,15 +463,17 @@ CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m @@ -477,40 +485,44 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_NETFILTER_XT_MATCH_TIME is not set CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -518,8 +530,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PROTO_SCTP=m @@ -531,9 +543,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m @@ -543,6 +555,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=y @@ -565,11 +578,10 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -624,21 +636,20 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -835,6 +846,7 @@ CONFIG_SATA_SVW=y # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -926,6 +938,9 @@ CONFIG_IBM_NEW_EMAC_ZMII=y CONFIG_IBM_NEW_EMAC_RGMII=y CONFIG_IBM_NEW_EMAC_TAH=y CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_AMD8111_ETH is not set @@ -946,12 +961,12 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -969,10 +984,12 @@ CONFIG_SPIDER_NET=m # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set CONFIG_EHEA=m +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set CONFIG_IXGB=m # CONFIG_S2IO is not set @@ -980,9 +997,11 @@ CONFIG_IXGB=m # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set CONFIG_PASEMI_MAC=y +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set CONFIG_TR=y CONFIG_IBMOL=y @@ -1065,6 +1084,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -1080,6 +1100,7 @@ CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set # @@ -1255,6 +1276,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1282,6 +1314,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1326,6 +1359,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -1337,6 +1371,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_CARMINE is not set CONFIG_FB_IBM_GXT4500=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_ILI9320 is not set @@ -1370,6 +1405,7 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1481,9 +1517,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1500,6 +1563,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set # CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1520,6 +1585,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1527,6 +1594,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1548,7 +1616,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1569,6 +1636,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1586,7 +1654,9 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1656,12 +1726,15 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1670,6 +1743,7 @@ CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_PPC=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1679,14 +1753,20 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set @@ -1700,6 +1780,7 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set CONFIG_XFS_POSIX_ACL=y @@ -1740,6 +1821,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1785,6 +1867,7 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_XPRT_RDMA=m +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set @@ -1866,9 +1949,8 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1929,22 +2011,31 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACER_MAX_TRACE=y +CONFIG_RING_BUFFER=y CONFIG_TRACING=y -# CONFIG_FTRACE is not set + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set CONFIG_IRQSOFF_TRACER=y CONFIG_SCHED_TRACER=y CONFIG_CONTEXT_SWITCH_TRACER=y +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set # CONFIG_FTRACE_STARTUP_TEST is not set +CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1954,6 +2045,7 @@ CONFIG_DEBUG_STACK_USAGE=y # CONFIG_HCALL_STATS is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set CONFIG_XMON_DISASSEMBLY=y @@ -1968,6 +2060,7 @@ CONFIG_BOOTX_TEXT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y @@ -1978,10 +2071,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -2055,6 +2150,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 3c6dbdef56e..01f05ec5abf 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:29:50 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:37:01 2008 # # CONFIG_PPC64 is not set @@ -23,7 +23,7 @@ CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -89,6 +89,7 @@ CONFIG_LOG_BUF_SHIFT=17 CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_FREEZER is not set CONFIG_CGROUP_DEVICE=y CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y @@ -128,12 +129,15 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y @@ -144,10 +148,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -180,6 +181,8 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -202,6 +205,7 @@ CONFIG_PPC_82xx=y CONFIG_MPC8272_ADS=y CONFIG_PQ2FADS=y CONFIG_EP8248E=y +CONFIG_MGCOGE=y CONFIG_PQ2ADS=y CONFIG_8260=y CONFIG_8272=y @@ -226,6 +230,7 @@ CONFIG_PPC_86xx=y CONFIG_MPC8641_HPCN=y CONFIG_SBC8641D=y CONFIG_MPC8610_HPCD=y +CONFIG_GEF_SBC610=y CONFIG_MPC8641=y CONFIG_MPC8610=y # CONFIG_EMBEDDED6xx is not set @@ -268,6 +273,7 @@ CONFIG_TAU=y # CONFIG_TAU_INT is not set CONFIG_TAU_AVERAGE=y CONFIG_QUICC_ENGINE=y +CONFIG_QE_GPIO=y CONFIG_CPM2=y CONFIG_FSL_ULI1575=y CONFIG_CPM=y @@ -275,6 +281,7 @@ CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM_ATA=m CONFIG_PPC_BESTCOMM_FEC=m CONFIG_PPC_BESTCOMM_GEN_BD=m +CONFIG_MPC8xxx_GPIO=y # # Kernel options @@ -294,6 +301,8 @@ CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set @@ -309,15 +318,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set CONFIG_RESOURCES_64BIT=y +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -359,7 +368,7 @@ CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set @@ -466,7 +475,6 @@ CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y -# CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y @@ -521,18 +529,20 @@ CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m @@ -543,41 +553,45 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m # CONFIG_NF_CONNTRACK_PROC_COMPAT is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -585,8 +599,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_DCCP=m CONFIG_NF_NAT_PROTO_GRE=m @@ -600,9 +614,9 @@ CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_SECURITY=m CONFIG_IP_NF_ARPTABLES=m @@ -615,16 +629,16 @@ CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m @@ -635,10 +649,6 @@ CONFIG_IP6_NF_SECURITY=m # DECnet: Netfilter Configuration # # CONFIG_DECNET_NF_GRABULATOR is not set - -# -# Bridge: Netfilter Configuration -# CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -698,6 +708,7 @@ CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m # CONFIG_VLAN_8021Q_GVRP is not set CONFIG_DECNET=m @@ -727,6 +738,7 @@ CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -767,6 +779,7 @@ CONFIG_NET_ACT_IPT=m CONFIG_NET_ACT_NAT=m CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y @@ -853,13 +866,12 @@ CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y CONFIG_CFG80211=m CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_MAC80211=m @@ -868,7 +880,9 @@ CONFIG_MAC80211=m # Rate control algorithm selection # CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT="pid" CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y @@ -917,7 +931,7 @@ CONFIG_PARPORT_SERIAL=m CONFIG_PARPORT_1284=y CONFIG_PARPORT_NOT_PC=y CONFIG_PNP=y -# CONFIG_PNP_DEBUG is not set +CONFIG_PNP_DEBUG_MESSAGES=y # # Protocols @@ -958,22 +972,20 @@ CONFIG_ENCLOSURE_SERVICES=m # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y -CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_BLK_DEV_IDESCSI is not set CONFIG_IDE_TASK_IOCTL=y CONFIG_IDE_PROC_FS=y @@ -1201,6 +1213,7 @@ CONFIG_PATA_OF_PLATFORM=m CONFIG_PATA_SCH=m CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m @@ -1332,6 +1345,9 @@ CONFIG_NE2000=m # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_AMD8111_ETH=m @@ -1370,13 +1386,13 @@ CONFIG_DE600=m CONFIG_DE620=m CONFIG_FEC_MPC52xx=m CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_ATL2 is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_DL2K=m CONFIG_E1000=m -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set CONFIG_E1000E=m CONFIG_IP1000=m CONFIG_IGB=m @@ -1400,19 +1416,23 @@ CONFIG_MV643XX_ETH=m CONFIG_QLA3XXX=m CONFIG_ATL1=m # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y CONFIG_CHELSIO_T1=m CONFIG_CHELSIO_T1_1G=y CONFIG_CHELSIO_T3=m +# CONFIG_ENIC is not set CONFIG_IXGBE=m CONFIG_IXGB=m CONFIG_S2IO=m CONFIG_MYRI10GE=m CONFIG_NETXEN_NIC=m CONFIG_NIU=m +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set CONFIG_TEHUTI=m CONFIG_BNX2X=m +CONFIG_QLGE=m CONFIG_SFC=m # CONFIG_TR is not set @@ -1434,6 +1454,7 @@ CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SMSC95XX=m CONFIG_USB_NET_GL620A=m CONFIG_USB_NET_NET1080=m CONFIG_USB_NET_PLUSB=m @@ -1546,6 +1567,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_APPLETOUCH=m @@ -1598,6 +1620,7 @@ CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m CONFIG_INPUT_UINPUT=m # @@ -1787,6 +1810,7 @@ CONFIG_SENSORS_PCF8591=m # CONFIG_TPS65010 is not set CONFIG_SENSORS_MAX6875=m CONFIG_SENSORS_TSL2550=m +CONFIG_MCU_MPC8349EMITX=m # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -1837,6 +1861,7 @@ CONFIG_POWER_SUPPLY=m CONFIG_APM_POWER=m # CONFIG_BATTERY_DS2760 is not set CONFIG_BATTERY_PMU=m +# CONFIG_BATTERY_BQ27x00 is not set CONFIG_HWMON=m CONFIG_HWMON_VID=m # CONFIG_SENSORS_AD7414 is not set @@ -1946,8 +1971,21 @@ CONFIG_SSB_DRIVER_PCICORE=y # # CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=m +CONFIG_MFD_SM501_GPIO=y # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1999,6 +2037,7 @@ CONFIG_VIDEO_TVEEPROM=m CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set CONFIG_VIDEO_IR_I2C=m @@ -2079,14 +2118,12 @@ CONFIG_VIDEO_CPIA_USB=m CONFIG_VIDEO_CPIA2=m CONFIG_VIDEO_SAA5246A=m CONFIG_VIDEO_SAA5249=m -CONFIG_TUNER_3036=m # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set CONFIG_VIDEO_SAA7134=m CONFIG_VIDEO_SAA7134_ALSA=m CONFIG_VIDEO_SAA7134_DVB=m CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DPC=m CONFIG_VIDEO_HEXIUM_ORION=m CONFIG_VIDEO_HEXIUM_GEMINI=m CONFIG_VIDEO_CX88=m @@ -2100,10 +2137,40 @@ CONFIG_VIDEO_IVTV=m CONFIG_VIDEO_FB_IVTV=m CONFIG_VIDEO_CX18=m # CONFIG_VIDEO_CAFE_CCIC is not set +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_MT9M001=m +# CONFIG_MT9M001_PCA9536_SWITCH is not set +# CONFIG_SOC_CAMERA_MT9M111 is not set +CONFIG_SOC_CAMERA_MT9V022=m +# CONFIG_MT9V022_PCA9536_SWITCH is not set +# CONFIG_SOC_CAMERA_PLATFORM is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_V4L_USB_DRIVERS=y CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_ZC3XX is not set CONFIG_VIDEO_PVRUSB2=m CONFIG_VIDEO_PVRUSB2_SYSFS=y CONFIG_VIDEO_PVRUSB2_DVB=y @@ -2130,13 +2197,6 @@ CONFIG_USB_PWC=m CONFIG_USB_ZR364XX=m CONFIG_USB_STKWEBCAM=m # CONFIG_USB_S2255 is not set -CONFIG_SOC_CAMERA=m -CONFIG_SOC_CAMERA_MT9M001=m -# CONFIG_MT9M001_PCA9536_SWITCH is not set -CONFIG_SOC_CAMERA_MT9V022=m -# CONFIG_MT9V022_PCA9536_SWITCH is not set -# CONFIG_SOC_CAMERA_PLATFORM is not set -# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_CADET is not set # CONFIG_RADIO_RTRACK is not set @@ -2154,6 +2214,7 @@ CONFIG_RADIO_MAESTRO=m # CONFIG_RADIO_ZOLTRIX is not set CONFIG_USB_DSBR=m CONFIG_USB_SI470X=m +CONFIG_USB_MR800=m CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -2194,16 +2255,12 @@ CONFIG_DVB_USB_OPERA1=m CONFIG_DVB_USB_AF9005=m CONFIG_DVB_USB_AF9005_REMOTE=m # CONFIG_DVB_USB_DW2102 is not set +# CONFIG_DVB_USB_CINERGY_T2 is not set # CONFIG_DVB_USB_ANYSEE is not set +# CONFIG_DVB_USB_DTV5100 is not set +# CONFIG_DVB_USB_AF9015 is not set CONFIG_DVB_TTUSB_BUDGET=m CONFIG_DVB_TTUSB_DEC=m -CONFIG_DVB_CINERGYT2=m -CONFIG_DVB_CINERGYT2_TUNING=y -CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32 -CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512 -CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250 -CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y -CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100 # CONFIG_DVB_SIANO_SMS1XXX is not set # @@ -2224,6 +2281,11 @@ CONFIG_DVB_BT8XX=m # CONFIG_DVB_PLUTO2=m +# +# Supported SDMC DM1105 Adapters +# +CONFIG_DVB_DM1105=m + # # Supported DVB Frontends # @@ -2240,6 +2302,8 @@ CONFIG_DVB_CX24110=m CONFIG_DVB_CX24123=m CONFIG_DVB_MT312=m CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m CONFIG_DVB_STV0299=m CONFIG_DVB_TDA8083=m CONFIG_DVB_TDA10086=m @@ -2247,6 +2311,8 @@ CONFIG_DVB_VES1X93=m CONFIG_DVB_TUNER_ITD1000=m CONFIG_DVB_TDA826X=m CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_SI21XX=m # # DVB-T (terrestrial) frontends @@ -2299,6 +2365,13 @@ CONFIG_DVB_TUNER_DIB0070=m CONFIG_DVB_LNBP21=m CONFIG_DVB_ISL6405=m CONFIG_DVB_ISL6421=m +CONFIG_DVB_LGS8GL5=m + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y CONFIG_USB_DABUSB=m @@ -2320,6 +2393,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -2382,6 +2456,7 @@ CONFIG_FB_SAVAGE=m CONFIG_FB_SAVAGE_I2C=y CONFIG_FB_SAVAGE_ACCEL=y # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set CONFIG_FB_NEOMAGIC=m CONFIG_FB_KYRO=m CONFIG_FB_3DFX=m @@ -2397,6 +2472,7 @@ CONFIG_FB_TRIDENT_ACCEL=y CONFIG_FB_SM501=m CONFIG_FB_IBM_GXT4500=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set @@ -2432,6 +2508,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -2594,15 +2671,36 @@ CONFIG_HIDRAW=y # USB Input Devices # CONFIG_USB_HID=y -CONFIG_USB_HIDINPUT_POWERBOOK=y -CONFIG_HID_FF=y CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y CONFIG_LOGITECH_FF=y CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y CONFIG_PANTHERLORD_FF=y +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y CONFIG_THRUSTMASTER_FF=y CONFIG_ZEROPLUS_FF=y -CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -2620,6 +2718,8 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -2647,6 +2747,8 @@ CONFIG_USB_U132_HCD=m CONFIG_USB_SL811_HCD=m # CONFIG_USB_SL811_CS is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # CONFIG_USB_MUSB_HDRC is not set # @@ -2655,6 +2757,7 @@ CONFIG_USB_SL811_HCD=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -2676,7 +2779,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_ONETOUCH=y CONFIG_USB_STORAGE_KARMA=y -# CONFIG_USB_STORAGE_SIERRA is not set CONFIG_USB_STORAGE_CYPRESS_ATACB=y # CONFIG_USB_LIBUSUAL is not set @@ -2741,6 +2843,7 @@ CONFIG_USB_SERIAL_DEBUG=m CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m # CONFIG_USB_RIO500 is not set CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m @@ -2762,12 +2865,14 @@ CONFIG_USB_TRANCEVIBRATOR=m CONFIG_USB_IOWARRIOR=m # CONFIG_USB_TEST is not set CONFIG_USB_ISIGHTFW=m +CONFIG_USB_VST=m CONFIG_USB_ATM=m CONFIG_USB_SPEEDTOUCH=m CONFIG_USB_CXACRU=m CONFIG_USB_UEAGLEATM=m CONFIG_USB_XUSBATM=m # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -2787,6 +2892,7 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_IDE_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m CONFIG_ACCESSIBILITY=y CONFIG_A11Y_BRAILLE_CONSOLE=y @@ -2837,12 +2943,15 @@ CONFIG_RTC_DRV_FM3130=m # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set CONFIG_RTC_DRV_DS1511=m CONFIG_RTC_DRV_DS1553=m CONFIG_RTC_DRV_DS1742=m CONFIG_RTC_DRV_STK17TA8=m # CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_M48T35=m CONFIG_RTC_DRV_M48T59=m +# CONFIG_RTC_DRV_BQ4802 is not set CONFIG_RTC_DRV_V3020=m # @@ -2862,7 +2971,10 @@ CONFIG_KS0108_DELAY=2 CONFIG_UIO=m CONFIG_UIO_CIF=m CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m CONFIG_UIO_SMX=m +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_STAGING is not set # # File systems @@ -2872,20 +2984,21 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y CONFIG_EXT3_FS=m CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -CONFIG_EXT4DEV_FS=m -CONFIG_EXT4DEV_FS_XATTR=y -CONFIG_EXT4DEV_FS_POSIX_ACL=y -CONFIG_EXT4DEV_FS_SECURITY=y +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_FS_XIP=y CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set -CONFIG_JBD2=m +CONFIG_JBD2=y CONFIG_JBD2_DEBUG=y -CONFIG_FS_MBCACHE=m +CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y @@ -2898,6 +3011,7 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y @@ -2911,6 +3025,7 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m CONFIG_OCFS2_FS_STATS=y # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -2950,6 +3065,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y @@ -2996,17 +3112,18 @@ CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG2 is not set CONFIG_CIFS_EXPERIMENTAL=y -CONFIG_CIFS_UPCALL=y CONFIG_CIFS_DFS_UPCALL=y CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y @@ -3084,15 +3201,13 @@ CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m CONFIG_DLM=m CONFIG_DLM_DEBUG=y -CONFIG_QE_GPIO=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m -CONFIG_CRC16=m +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -3157,28 +3272,38 @@ CONFIG_DEBUG_SG=y CONFIG_FRAME_POINTER=y CONFIG_BOOT_PRINTK_DELAY=y # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set CONFIG_FAULT_INJECTION=y CONFIG_FAILSLAB=y CONFIG_FAIL_PAGE_ALLOC=y CONFIG_FAIL_MAKE_REQUEST=y +CONFIG_FAIL_IO_TIMEOUT=y CONFIG_FAULT_INJECTION_DEBUG_FS=y CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACER_MAX_TRACE=y +CONFIG_RING_BUFFER=y CONFIG_TRACING=y -CONFIG_FTRACE=y + +# +# Tracers +# +CONFIG_FUNCTION_TRACER=y CONFIG_SCHED_TRACER=y CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_DYNAMIC_FTRACE=y +# CONFIG_BOOT_TRACER is not set +CONFIG_STACK_TRACER=y # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set # CONFIG_BUILD_DOCSRC is not set +CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -3186,6 +3311,7 @@ CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set CONFIG_XMON_DISASSEMBLY=y @@ -3202,6 +3328,7 @@ CONFIG_BOOTX_TEXT=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_FILE_CAPABILITIES=y @@ -3226,10 +3353,12 @@ CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -3303,6 +3432,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_HIFN_795X=m CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index e77c5e7a0be..1e520ab6511 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 13:31:07 2008 +# Linux kernel version: 2.6.28-rc3 +# Tue Nov 11 19:37:06 2008 # CONFIG_PPC64=y @@ -22,7 +22,7 @@ CONFIG_SMP=y CONFIG_NR_CPUS=128 CONFIG_64BIT=y CONFIG_WORD_SIZE=64 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -86,6 +86,7 @@ CONFIG_LOG_BUF_SHIFT=17 CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set CONFIG_CGROUP_NS=y +CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y # CONFIG_GROUP_SCHED is not set @@ -123,12 +124,15 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -141,8 +145,6 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -175,6 +177,8 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -237,6 +241,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y @@ -246,7 +252,6 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y -# CONFIG_CRASH_DUMP is not set # CONFIG_PHYP_DUMP is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_NUMA=y @@ -262,7 +267,6 @@ CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y @@ -271,8 +275,10 @@ CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y +CONFIG_UNEVICTABLE_LRU=y CONFIG_NODES_SPAN_OTHER_NODES=y # CONFIG_PPC_HAS_HASH_64K is not set # CONFIG_PPC_64K_PAGES is not set @@ -307,6 +313,7 @@ CONFIG_HOTPLUG_PCI=m CONFIG_HOTPLUG_PCI_RPA=m CONFIG_HOTPLUG_PCI_RPA_DLPAR=m # CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 @@ -351,7 +358,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -383,9 +389,10 @@ CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m @@ -396,19 +403,22 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -416,20 +426,20 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -437,8 +447,8 @@ CONFIG_IP_NF_TARGET_ULOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_UDPLITE=m CONFIG_NF_NAT_FTP=m @@ -456,6 +466,7 @@ CONFIG_NF_NAT_TFTP=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=y @@ -479,14 +490,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -546,19 +551,18 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -696,6 +700,7 @@ CONFIG_SATA_PMP=y # CONFIG_ATA_SFF is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y @@ -765,6 +770,9 @@ CONFIG_IBMVETH=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y # CONFIG_AMD8111_ETH is not set @@ -786,12 +794,12 @@ CONFIG_E100=y # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=y CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -808,19 +816,23 @@ CONFIG_TIGON3=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set CONFIG_EHEA=y +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set CONFIG_IXGB=m CONFIG_S2IO=m # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set CONFIG_TR=y CONFIG_IBMOL=y @@ -902,6 +914,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -917,6 +930,7 @@ CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_UINPUT is not set # @@ -1076,6 +1090,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1103,6 +1128,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1146,6 +1172,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -1157,6 +1184,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_CARMINE is not set CONFIG_FB_IBM_GXT4500=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set @@ -1198,9 +1226,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1217,6 +1272,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1236,6 +1293,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1243,6 +1302,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1264,7 +1324,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set CONFIG_USB_STORAGE_ONETOUCH=y # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1286,6 +1345,7 @@ CONFIG_USB_STORAGE_ONETOUCH=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1303,7 +1363,9 @@ CONFIG_USB_STORAGE_ONETOUCH=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1331,6 +1393,7 @@ CONFIG_INFINIBAND_SRP=m # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1340,14 +1403,20 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set @@ -1361,6 +1430,7 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set CONFIG_XFS_POSIX_ACL=y @@ -1372,6 +1442,7 @@ CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_STATS=y CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1405,6 +1476,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1449,6 +1521,7 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_XPRT_RDMA=m +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set @@ -1514,9 +1587,8 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1580,21 +1652,31 @@ CONFIG_DEBUG_MEMORY_INIT=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACER_MAX_TRACE=y +CONFIG_RING_BUFFER=y CONFIG_TRACING=y -# CONFIG_FTRACE is not set + +# +# Tracers +# +CONFIG_FUNCTION_TRACER=y CONFIG_IRQSOFF_TRACER=y CONFIG_SCHED_TRACER=y CONFIG_CONTEXT_SWITCH_TRACER=y +# CONFIG_BOOT_TRACER is not set +CONFIG_STACK_TRACER=y # CONFIG_FTRACE_STARTUP_TEST is not set +CONFIG_DYNAMIC_PRINTK_DEBUG=y # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1604,6 +1686,7 @@ CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_HCALL_STATS=y # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y @@ -1618,16 +1701,19 @@ CONFIG_VIRQ_DEBUG=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m @@ -1701,6 +1787,11 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set -- cgit v1.2.3-70-g09d2 From 8c2f5fa51e1b22db53acf4f3918b6f590b4a35a1 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Mon, 10 Nov 2008 13:58:41 +0100 Subject: myri10ge: fix stop/go ordering even more The doorbell writes may be seen out of order by the firmware if they are in WC memory since the tx spin(un)lock does not flush WC writes. Hence if the "stop" is written on a different CPU than the "go", it is possible that the stop will arrive after the go unless we add an explicit memory barrier (and mmiowb() is not enough). It fixes transmit hangs in multi tx queue mode. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index a5f428bcc0e..b3786709730 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.4.3-1.375" +#define MYRI10GE_VERSION_STR "1.4.3-1.378" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -1393,6 +1393,7 @@ myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index) if (tx->req == tx->done) { tx->queue_active = 0; put_be32(htonl(1), tx->send_stop); + mb(); mmiowb(); } __netif_tx_unlock(dev_queue); @@ -2865,6 +2866,7 @@ again: if ((mgp->dev->real_num_tx_queues > 1) && tx->queue_active == 0) { tx->queue_active = 1; put_be32(htonl(1), tx->send_go); + mb(); mmiowb(); } tx->pkt_start++; -- cgit v1.2.3-70-g09d2 From 9f64306b8a3949b74cb11d3b2f613e8a2af20fa6 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Sun, 9 Nov 2008 00:55:28 -0800 Subject: cxgb3 - eeprom read fixes Protect against invalid phy entries in the eeprom. Extend eeprom access timeout. Signed-off-by: Divy Le Ray Signed-off-by: Jeff Garzik --- drivers/net/cxgb3/t3_hw.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 968f64be374..9a0898b0dbc 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -572,7 +572,7 @@ struct t3_vpd { u32 pad; /* for multiple-of-4 sizing and alignment */ }; -#define EEPROM_MAX_POLL 4 +#define EEPROM_MAX_POLL 40 #define EEPROM_STAT_ADDR 0x4000 #define VPD_BASE 0xc00 @@ -3690,6 +3690,12 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, ; pti = &port_types[adapter->params.vpd.port_type[j]]; + if (!pti->phy_prep) { + CH_ALERT(adapter, "Invalid port type index %d\n", + adapter->params.vpd.port_type[j]); + return -EINVAL; + } + ret = pti->phy_prep(&p->phy, adapter, ai->phy_base_addr + j, ai->mdio_ops); if (ret) -- cgit v1.2.3-70-g09d2 From f9ee3882969224aa9f086268020c31819be6ae99 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Sun, 9 Nov 2008 00:55:33 -0800 Subject: cxgb3 - Limit multiqueue setting to msi-x Allow multiqueue setting in MSI-X mode only Signed-off-by: Divy Le Ray Signed-off-by: Jeff Garzik --- drivers/net/cxgb3/cxgb3_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 1ace41a13ac..f66367ed693 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -2699,7 +2699,7 @@ static void set_nqsets(struct adapter *adap) int hwports = adap->params.nports; int nqsets = SGE_QSETS; - if (adap->params.rev > 0) { + if (adap->params.rev > 0 && adap->flags & USING_MSIX) { if (hwports == 2 && (hwports * nqsets > SGE_QSETS || num_cpus >= nqsets / hwports)) -- cgit v1.2.3-70-g09d2 From cf3760dad576c8dfb4fef4b8a8a08a027bf02583 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 6 Nov 2008 17:06:42 -0600 Subject: RDMA/cxgb3: deadlock in iw_cxgb3 can cause hang when configuring interface. When the iw_cxgb3 module's cxgb3_client "add" func gets called by the cxgb3 module, the iwarp driver ends up calling the ethtool ops get_drvinfo function in cxgb3 to get the fw version and other info. Currently the iwarp driver grabs the rtnl lock around this down call to serialize. As of 2.6.27 or so, things changed such that the rtnl lock is held around the call to the netdev driver open function. Also the cxgb3_client "add" function doesn't get called if the device is down. So, if you load cxgb3, then load iw_cxgb3, then ifconfig up the device, the iw_cxgb3 add func gets called with the rtnl_lock held. If you load cxgb3, ifconfig up the device, then load iw_cxgb3, the add func gets called without the rtnl_lock held. The former causes the deadlock, the latter does not. In addition, there are iw_cxgb3 sysfs handlers that also can call down into cxgb3 to gather the fw and hw versions. These can be called concurrently on different processors and at any time. Thus we need to push this serialization down in the cxgb3 driver get_drvinfo func. The fix is to remove rtnl lock usage, and use a per-device lock in cxgb3. Signed-off-by: Steve Wise Signed-off-by: Jeff Garzik --- drivers/infiniband/hw/cxgb3/iwch_provider.c | 6 ------ drivers/net/cxgb3/cxgb3_main.c | 2 ++ 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index ecff9804358..160ef482712 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -1102,9 +1102,7 @@ static u64 fw_vers_string_to_u64(struct iwch_dev *iwch_dev) char *cp, *next; unsigned fw_maj, fw_min, fw_mic; - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); next = info.fw_version + 1; cp = strsep(&next, "."); @@ -1192,9 +1190,7 @@ static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, ch struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.fw_version); } @@ -1207,9 +1203,7 @@ static ssize_t show_hca(struct device *dev, struct device_attribute *attr, struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.driver); } diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index f66367ed693..2c341f83d32 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -1307,8 +1307,10 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) u32 fw_vers = 0; u32 tp_vers = 0; + spin_lock(&adapter->stats_lock); t3_get_fw_version(adapter, &fw_vers); t3_get_tp_version(adapter, &tp_vers); + spin_unlock(&adapter->stats_lock); strcpy(info->driver, DRV_NAME); strcpy(info->version, DRV_VERSION); -- cgit v1.2.3-70-g09d2 From 347c8d83cd9f546a8357e1ab12fa6867707975d8 Mon Sep 17 00:00:00 2001 From: "Dasgupta, Romit" Date: Thu, 6 Nov 2008 15:46:18 +0530 Subject: [netdrvr] smc911x: fix for driver resume (and compilation warning) I am trying out suspend, resume on an OMAP3 based board. What I see during resume is that the SMC911x driver resume routing gets stuck after trying to transmit the packet out of the controller. Some debug messages below: --> smc911x_drv_resume eth0: --> smc911x_reset eth0: smc911x_reset timeout waiting for PM restore eth0: --> smc911x_enable eth0: --> smc911x_phy_configure() eth0: --> smc911x_phy_reset() eth0: phy caps=0x782d eth0: phy advertised caps=0x0de1 eth0: --> smc911x_phy_check_media smc911x_phy_read: phyaddr=0x1, phyreg=0x01, phydata=0x7809 smc911x_phy_read: phyaddr=0x1, phyreg=0x01, phydata=0x7809 eth0: link down Restarting tasks ... eth0: --> smc911x_hard_start_xmit eth0: --> smc911x_hardware_send_pkt eth0: --> smc911x_hard_start_xmit eth0: --> smc911x_hardware_send_pkt eth0: --> smc911x_hard_start_xmit eth0: --> smc911x_hardware_send_pkt nfs: server 172.24.190.217 not responding, still trying nfs: server 172.24.190.217 not responding, still trying The following change makes it work fine: (The change within smc911x_drv_probe function was to get rid of a compilation warning). Signed-off-by: Romit Dasgupta Signed-off-by: Jeff Garzik --- drivers/net/smc911x.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 5051554ff05..1f26ab0e798 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -2050,7 +2050,9 @@ err_out: */ static int smc911x_drv_probe(struct platform_device *pdev) { +#ifdef SMC_DYNAMIC_BUS_CONFIG struct smc911x_platdata *pd = pdev->dev.platform_data; +#endif struct net_device *ndev; struct resource *res; struct smc911x_local *lp; @@ -2182,9 +2184,9 @@ static int smc911x_drv_resume(struct platform_device *dev) if (netif_running(ndev)) { smc911x_reset(ndev); - smc911x_enable(ndev); if (lp->phy_type != 0) smc911x_phy_configure(&lp->phy_configure); + smc911x_enable(ndev); netif_device_attach(ndev); } } -- cgit v1.2.3-70-g09d2 From 5d5254f0d3b9bebc47d97e357374c0ad0c291a7d Mon Sep 17 00:00:00 2001 From: Gautham R Shenoy Date: Sat, 25 Oct 2008 10:22:38 +0530 Subject: timers: handle HRTIMER_CB_IRQSAFE_UNLOCKED correctly from softirq context Impact: fix incorrect locking triggered during hotplug-intense stress-tests While migrating the the CB_IRQSAFE_UNLOCKED timers during a cpu-offline, we queue them on the cb_pending list, so that they won't go stale. Thus, when the callbacks of the timers run from the softirq context, they could run into potential deadlocks, since these callbacks assume that they're running with irq's disabled, thereby annoying lockdep! Fix this by emulating hardirq context while running these callbacks from the hrtimer softirq. ================================= [ INFO: inconsistent lock state ] 2.6.27 #2 -------------------------------- inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. ksoftirqd/0/4 [HC0[0]:SC1[1]:HE1:SE0] takes: (&rq->lock){++..}, at: [] sched_rt_period_timer+0x9e/0x1fc {in-hardirq-W} state was registered at: [] __lock_acquire+0x549/0x121e [] native_sched_clock+0x88/0x99 [] clocksource_get_next+0x39/0x3f [] update_wall_time+0x616/0x7df [] lock_acquire+0x5a/0x74 [] scheduler_tick+0x3a/0x18d [] _spin_lock+0x1c/0x45 [] scheduler_tick+0x3a/0x18d [] scheduler_tick+0x3a/0x18d [] update_process_times+0x3a/0x44 [] tick_periodic+0x63/0x6d [] tick_handle_periodic+0x14/0x5e [] timer_interrupt+0x44/0x4a [] handle_IRQ_event+0x13/0x3d [] handle_level_irq+0x79/0xbd [] do_IRQ+0x69/0x7d [] common_interrupt+0x28/0x30 [] aac_probe_one+0x1a3/0x3f3 [] _spin_unlock_irqrestore+0x36/0x39 [] setup_irq+0x1be/0x1f9 [] start_kernel+0x259/0x2c5 [] 0xffffffff irq event stamp: 50102 hardirqs last enabled at (50102): [] _spin_unlock_irq+0x20/0x23 hardirqs last disabled at (50101): [] _spin_lock_irq+0xa/0x4b softirqs last enabled at (50088): [] do_softirq+0x37/0x4d softirqs last disabled at (50099): [] do_softirq+0x37/0x4d other info that might help us debug this: no locks held by ksoftirqd/0/4. stack backtrace: Pid: 4, comm: ksoftirqd/0 Not tainted 2.6.27 #2 [] print_usage_bug+0x13e/0x147 [] mark_lock+0x493/0x797 [] __lock_acquire+0x5be/0x121e [] lock_acquire+0x5a/0x74 [] sched_rt_period_timer+0x9e/0x1fc [] _spin_lock+0x1c/0x45 [] sched_rt_period_timer+0x9e/0x1fc [] sched_rt_period_timer+0x9e/0x1fc [] finish_task_switch+0x41/0xbd [] native_sched_clock+0x88/0x99 [] sched_rt_period_timer+0x0/0x1fc [] run_hrtimer_pending+0x54/0xe5 [] sched_rt_period_timer+0x0/0x1fc [] __do_softirq+0x7b/0xef [] do_softirq+0x37/0x4d [] ksoftirqd+0x56/0xc5 [] ksoftirqd+0x0/0xc5 [] kthread+0x38/0x5d [] kthread+0x0/0x5d [] kernel_thread_helper+0x7/0x10 ======================= Signed-off-by: Gautham R Shenoy Acked-by: Peter Zijlstra Acked-by: "Paul E. McKenney" Signed-off-by: Ingo Molnar --- kernel/hrtimer.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 2b465dfde42..95d3949f2ae 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1209,6 +1209,7 @@ static void run_hrtimer_pending(struct hrtimer_cpu_base *cpu_base) enum hrtimer_restart (*fn)(struct hrtimer *); struct hrtimer *timer; int restart; + int emulate_hardirq_ctx = 0; timer = list_entry(cpu_base->cb_pending.next, struct hrtimer, cb_entry); @@ -1217,10 +1218,24 @@ static void run_hrtimer_pending(struct hrtimer_cpu_base *cpu_base) timer_stats_account_hrtimer(timer); fn = timer->function; + /* + * A timer might have been added to the cb_pending list + * when it was migrated during a cpu-offline operation. + * Emulate hardirq context for such timers. + */ + if (timer->cb_mode == HRTIMER_CB_IRQSAFE_PERCPU || + timer->cb_mode == HRTIMER_CB_IRQSAFE_UNLOCKED) + emulate_hardirq_ctx = 1; + __remove_hrtimer(timer, timer->base, HRTIMER_STATE_CALLBACK, 0); spin_unlock_irq(&cpu_base->lock); - restart = fn(timer); + if (unlikely(emulate_hardirq_ctx)) { + local_irq_disable(); + restart = fn(timer); + local_irq_enable(); + } else + restart = fn(timer); spin_lock_irq(&cpu_base->lock); -- cgit v1.2.3-70-g09d2 From 6a13378a56ce06afca9db75f3d4e663fba5f0992 Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Sun, 19 Oct 2008 20:10:13 -0300 Subject: V4L/DVB (9337a): HID: Don't allow KWorld radio fm700 be handled by usb hid drivers This device is already handled by radio-si470x driver, and we therefore want usbhid to ignore it. Signed-off-by: Alexey Klimov Acked-by: Tobias Lorenz Signed-off-by: Mauro Carvalho Chehab --- drivers/hid/hid-core.c | 1 + drivers/hid/hid-ids.h | 3 +++ 2 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 1903e751565..d3671b4049c 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1265,6 +1265,7 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 5cc40429173..f05bcbbbb0d 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -253,6 +253,9 @@ #define USB_VENDOR_ID_KBGEAR 0x084e #define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001 +#define USB_VENDOR_ID_KWORLD 0x1b80 +#define USB_DEVICE_ID_KWORLD_RADIO_FM700 0xd700 + #define USB_VENDOR_ID_LABTEC 0x1020 #define USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD 0x0006 -- cgit v1.2.3-70-g09d2 From f7378995951a2c5e4e836df84e5669bc72c8dda8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 18 Oct 2008 11:05:58 -0300 Subject: V4L/DVB (9337b): remove tuner-3036 and dpc7146 drivers from feature-removal-schedule.txt The tuner-3036 and dpc7146 drivers have been deleted now so we can remove the corresponding entries from feature-removal-schedule.txt. (Thanks for doing this, BTW.) Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- Documentation/feature-removal-schedule.txt | 24 ------------------------ 1 file changed, 24 deletions(-) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 05d71b4b943..c28a2ac88f9 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -56,30 +56,6 @@ Who: Mauro Carvalho Chehab --------------------------- -What: old tuner-3036 i2c driver -When: 2.6.28 -Why: This driver is for VERY old i2c-over-parallel port teletext receiver - boxes. Rather then spending effort on converting this driver to V4L2, - and since it is extremely unlikely that anyone still uses one of these - devices, it was decided to drop it. -Who: Hans Verkuil - Mauro Carvalho Chehab - - --------------------------- - -What: V4L2 dpc7146 driver -When: 2.6.28 -Why: Old driver for the dpc7146 demonstration board that is no longer - relevant. The last time this was tested on actual hardware was - probably around 2002. Since this is a driver for a demonstration - board the decision was made to remove it rather than spending a - lot of effort continually updating this driver to stay in sync - with the latest internal V4L2 or I2C API. -Who: Hans Verkuil - Mauro Carvalho Chehab - ---------------------------- - What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl]) When: November 2005 Files: drivers/pcmcia/: pcmcia_ioctl.c -- cgit v1.2.3-70-g09d2 From 3b37a15c2d75585cc0da49b8e69345af91e227ce Mon Sep 17 00:00:00 2001 From: Manu Abraham Date: Mon, 20 Oct 2008 18:14:14 -0300 Subject: V4L/DVB (9346): Optimization: Enable gate in a symmetric/disciplined way, rather than implementing different ways leading to confusion. This allows multiple gate_enable/disable's in the tuner_read/write functions, thereby lesser number of I/O operations throughout, eventually leading to better results. As a side effect demods that detect the STOP bit for auto closing of the gate can be avoided, thereby a very minimal gain in disabling the auto detect feature as well. Improves readability on the device control. Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-core/dvb_frontend.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 5689d1f1d44..8557bf12cfb 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -223,6 +223,8 @@ static void dvb_frontend_init(struct dvb_frontend *fe) if (fe->ops.init) fe->ops.init(fe); if (fe->ops.tuner_ops.init) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); fe->ops.tuner_ops.init(fe); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); -- cgit v1.2.3-70-g09d2 From e62b47565a865d77133c88aee6a2a14838aeb9b8 Mon Sep 17 00:00:00 2001 From: Antoine Jacquet Date: Tue, 21 Oct 2008 17:54:51 -0300 Subject: V4L/DVB (9348): dtv5100: add dependency on zl10353 Update Kconfig to add missing dependency on zl10353 for dtv5100 driver. Signed-off-by: Antoine Jacquet Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 3c13bcfa638..47488a97a85 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -283,6 +283,7 @@ config DVB_USB_ANYSEE config DVB_USB_DTV5100 tristate "AME DTV-5100 USB2.0 DVB-T support" depends on DVB_USB + select DVB_ZL10353 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. -- cgit v1.2.3-70-g09d2 From 69df96c3dad0704301cdbd665636d8184fb314c6 Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Thu, 23 Oct 2008 09:20:27 -0300 Subject: V4L/DVB (9350): radio-si470x: add support for kworld usb radio This patch add support for new device named KWorld USB FM Radio SnapMusic Mobile 700 (FM700). And changes few lines in comments. Signed-off-by: Alexey Klimov Acked-by: Tobias Lorenz Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-si470x.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 5920cd30697..a20583c13b6 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -4,6 +4,7 @@ * Driver for USB radios for the Silicon Labs Si470x FM Radio Receivers: * - Silicon Labs USB FM Radio Reference Design * - ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF) + * - KWorld USB FM Radio SnapMusic Mobile 700 (FM700) * * Copyright (c) 2008 Tobias Lorenz * @@ -105,6 +106,9 @@ * - afc indication * - more safety checks, let si470x_get_freq return errno * - vidioc behavior corrected according to v4l2 spec + * 2008-10-20 Alexey Klimov + * - add support for KWorld USB FM Radio FM700 + * - blacklisted KWorld radio in hid-core.c and hid-ids.h * * ToDo: * - add firmware download/update support @@ -145,6 +149,8 @@ static struct usb_device_id si470x_usb_driver_id_table[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x10c4, 0x818a, USB_CLASS_HID, 0, 0) }, /* ADS/Tech FM Radio Receiver (formerly Instant FM Music) */ { USB_DEVICE_AND_INTERFACE_INFO(0x06e1, 0xa155, USB_CLASS_HID, 0, 0) }, + /* KWorld USB FM Radio SnapMusic Mobile 700 (FM700) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1b80, 0xd700, USB_CLASS_HID, 0, 0) }, /* Terminating entry */ { } }; -- cgit v1.2.3-70-g09d2 From a24ddee36ca10a90451552e6620ff7c4ff7e44b5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 23 Oct 2008 09:53:56 -0300 Subject: V4L/DVB (9351): ibmcam: Fix a regression caused by a482f327ff56bc3cf53176a7eb736cea47291a1d As reported by David Ellingsworth: > I'm not sure if it matters or not, but the ibmcam driver in the > Mauro's linux-2.6 git tree in the for_linus branch is currently > broken. uvd is equal to NULL during most of ibmcam_probe. Due to that, an OOPS is generated at dev_info. This patch replaces uvd->dev->dev to dev->dev inside this routine. Signed-off-by: Mauro Carvalho Chehab Reviewed-by: David Ellingsworth --- drivers/media/video/usbvideo/ibmcam.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c index 28421d386f1..c710bcd1df4 100644 --- a/drivers/media/video/usbvideo/ibmcam.c +++ b/drivers/media/video/usbvideo/ibmcam.c @@ -3695,7 +3695,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * unsigned char video_ep = 0; if (debug >= 1) - dev_info(&uvd->dev->dev, "ibmcam_probe(%p,%u.)\n", intf, ifnum); + dev_info(&dev->dev, "ibmcam_probe(%p,%u.)\n", intf, ifnum); /* We don't handle multi-config cameras */ if (dev->descriptor.bNumConfigurations != 1) @@ -3746,7 +3746,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * brand = "IBM PC Camera"; /* a.k.a. Xirlink C-It */ break; } - dev_info(&uvd->dev->dev, + dev_info(&dev->dev, "%s USB camera found (model %d, rev. 0x%04x)\n", brand, model, le16_to_cpu(dev->descriptor.bcdDevice)); } while (0); @@ -3754,7 +3754,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * /* Validate found interface: must have one ISO endpoint */ nas = intf->num_altsetting; if (debug > 0) - dev_info(&uvd->dev->dev, "Number of alternate settings=%d.\n", + dev_info(&dev->dev, "Number of alternate settings=%d.\n", nas); if (nas < 2) { err("Too few alternate settings for this camera!"); @@ -3799,7 +3799,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * actInterface = i; maxPS = le16_to_cpu(endpoint->wMaxPacketSize); if (debug > 0) - dev_info(&uvd->dev->dev, + dev_info(&dev->dev, "Active setting=%d. " "maxPS=%d.\n", i, maxPS); } else @@ -3840,7 +3840,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * RESTRICT_TO_RANGE(framerate, 0, 5); break; default: - dev_info(&uvd->dev->dev, "IBM camera: using 320x240\n"); + dev_info(&dev->dev, "IBM camera: using 320x240\n"); size = SIZE_320x240; /* No break here */ case SIZE_320x240: @@ -3869,7 +3869,7 @@ static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id * canvasY = 120; break; default: - dev_info(&uvd->dev->dev, "IBM NetCamera: using 176x144\n"); + dev_info(&dev->dev, "IBM NetCamera: using 176x144\n"); size = SIZE_176x144; /* No break here */ case SIZE_176x144: -- cgit v1.2.3-70-g09d2 From c7f09db6852d85e7f76322815051aad1c88d08cf Mon Sep 17 00:00:00 2001 From: Gregor Jasny Date: Thu, 23 Oct 2008 09:55:22 -0300 Subject: V4L/DVB (9352): Add some missing compat32 ioctls This patch adds the missing compat ioctls that are needed to operate Skype in combination with libv4l and a MJPEG only camera. If you think it's trivial enough please submit it to -stable, too. Signed-off-by: Gregor Jasny Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/compat_ioctl32.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/video/compat_ioctl32.c b/drivers/media/video/compat_ioctl32.c index bd5d9de5a00..e6ca4012b5f 100644 --- a/drivers/media/video/compat_ioctl32.c +++ b/drivers/media/video/compat_ioctl32.c @@ -867,6 +867,7 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case VIDIOC_STREAMON32: case VIDIOC_STREAMOFF32: case VIDIOC_G_PARM: + case VIDIOC_S_PARM: case VIDIOC_G_STD: case VIDIOC_S_STD: case VIDIOC_G_TUNER: @@ -885,6 +886,8 @@ long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg) case VIDIOC_S_INPUT32: case VIDIOC_TRY_FMT32: case VIDIOC_S_HW_FREQ_SEEK: + case VIDIOC_ENUM_FRAMESIZES: + case VIDIOC_ENUM_FRAMEINTERVALS: ret = do_video_ioctl(file, cmd, arg); break; -- cgit v1.2.3-70-g09d2 From 74084d33cb6221a5836a2a4438ec1bcf7a0797b0 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Fri, 17 Oct 2008 20:19:29 -0300 Subject: V4L/DVB (9355): de-BKL cafe_ccic.c Remove lock_kernel() call from cafe_ccic.c Commit d56dc61265d2527a63ab5b0f03199a43cd89ca36 added lock_kernel() calls to cafe_ccic.c. But that driver was written with proper locking and does not need the BKL, so take it back out. Signed-off-by: Jonathan Corbet Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cafe_ccic.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index a8c068e1de1..1740b9ebdce 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -1476,12 +1476,9 @@ static int cafe_v4l_open(struct inode *inode, struct file *filp) { struct cafe_camera *cam; - lock_kernel(); cam = cafe_find_dev(iminor(inode)); - if (cam == NULL) { - unlock_kernel(); + if (cam == NULL) return -ENODEV; - } filp->private_data = cam; mutex_lock(&cam->s_mutex); @@ -1493,7 +1490,6 @@ static int cafe_v4l_open(struct inode *inode, struct file *filp) } (cam->users)++; mutex_unlock(&cam->s_mutex); - unlock_kernel(); return 0; } -- cgit v1.2.3-70-g09d2 From d522af581c6abd0e064278345ca638b0553a93fa Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 20 Oct 2008 17:57:02 -0300 Subject: V4L/DVB (9356): [PATCH] saa7134: fix resource map sanity check conflict Impact: driver could possibly stomp on resources outside of its scope {mchehab@redhat.com: I got two versions of the same patch (identical, except for whitespacing). One authored by Andy Burns and another authored by Suresh Siddha. Due to that, I'm applying the one that has less CodingStyle errors. I'm also adding both comments and the SOB's for both patches, since they are both interesting} Suresh Siddha commented: Alexey Fisher reported: > resource map sanity check conflict: 0xcfeff800 0xcff007ff 0xcfe00000 > 0xcfefffff PCI Bus 0000:01 BAR base is located in the middle of the 4K page and the hardcoded size argument makes the request span two pages causing the conflict. Fix the hard coded size argument in ioremap(). Andy Burns commented: I have already sent this patch on the linux-dvb list, but it didn't get much attention, so re-sending direct, I hope you all don't mind. While attempting to run mythtv in a xen domU, I encountered problems loading the driver for my saa7134 card, with an error from ioremap(). This error was due to the driver allocating an incorrectly sized mmio area, which was trapped by xen's permission checks, but this would go un-noticed on a kernel without xen. My card has a 1K sized mmio area, I've had information that other cards have 2K areas, perhaps others have different sizes, yet the driver always attempts to map 4K. I realise that the granularity of mapping is the page size, which typically would be 4K, but unless the card's base address happens to fall on a 4K boundary (mine does not) then the base+4K will end up spanning two pages, and this is when the error occurs under xen. My patch uses the pci_resource_len macro to determine the size required for the user's particular card, instead of the hardcoded 4K value. I've tested with a couple of printk() inside ioremap() that the start address and size do get rounded to the closest page boundary. With this patch I am able to successfully load the saa7134 driver and run mythtv under xen with my card, subject to correct pollirq settings in case of shared IRQ, I am still seeing occasional DMA panics, which I think are related to swiotlb handling by dom0/domU, usually the panic occurs when changing mux, once tuned to a mux, 12 hour continuous recordings are possible without errors. Reported-by: Alexey Fisher Tested-by: Alexey Fisher Signed-off-by: Suresh Siddha Signed-off-by: Andy Burns Signed-off-by: Ingo Molnar Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 24918445294..dfbe08a9ad9 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -941,7 +941,8 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, dev->name,(unsigned long long)pci_resource_start(pci_dev,0)); goto fail1; } - dev->lmmio = ioremap(pci_resource_start(pci_dev,0), 0x1000); + dev->lmmio = ioremap(pci_resource_start(pci_dev, 0), + pci_resource_len(pci_dev, 0)); dev->bmmio = (__u8 __iomem *)dev->lmmio; if (NULL == dev->lmmio) { err = -EIO; -- cgit v1.2.3-70-g09d2 From 0e8bac9791b1539b72b8049b18218eb762d94d71 Mon Sep 17 00:00:00 2001 From: Matthias Schwarzott Date: Fri, 24 Oct 2008 10:47:07 -0300 Subject: V4L/DVB (9357): cx88-dvb: Fix Oops in case i2c bus failed to register There already is an report at kernel bugzilla about this issue: http://bugzilla.kernel.org/show_bug.cgi?id=9455 When enabling extra checks for the i2c-bus of cx88 based cards by loading i2c_algo_bit with bit_test=1 this may trigger an oops when loading cx88_dvb. This is caused by the extra check code that detects that the sda-line is stuck high and thus does not register the i2c-bus. cx88-dvb however does not check if the i2c-bus is valid and just uses core->i2c_adap to attach dvb frontend modules. This leads to an oops at the first call to i2c_transfer: $ modprobe i2c_algo_bit bit_test=1 $ modprobe cx8802 cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded cx88[0]: quirk: PCIPCI_NATOMA -- set TBFX cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected], frontend(s): 1 cx88[0]: TV tuner type 4, Radio tuner type -1 cx88[0]: SDA stuck high! cx88[0]: i2c register FAILED input: cx88 IR (Hauppauge Nova-S-Plus as /class/input/input5 cx88[0]/2: cx2388x 8802 Driver Manager cx88-mpeg driver manager 0000:00:10.2: enabling device (0154 -> 0156) cx88-mpeg driver manager 0000:00:10.2: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 cx88[0]/2: found at 0000:00:10.2, rev: 5, irq: 9, latency: 64, mmio: 0xfb000000 cx8802_probe() allocating 1 frontend(s) cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37] cx88[0]/2: cx2388x based DVB/ATSC card BUG: unable to handle kernel NULL pointer dereference at 00000000 IP: [] :i2c_core:i2c_transfer+0x1f/0x80 *pde = 00000000 Modules linked in: cx88_dvb(+) cx8802 cx88xx ir_common i2c_algo_bit tveeprom videobuf_dvb btcx_risc mga drm ipv6 fscpos eeprom nfsd exportfs stv0299 b2c2_flexcop_pci b2c2_flexcop cx24123 s5h1420 ves1x93 dvb_ttpci dvb_core saa7146_vv saa7146 videobuf_dma_sg videobuf_core videodev v4l1_compat ttpci_eeprom lirc_serial lirc_dev usbhid rtc uhci_hcd 8139too i2c_piix4 i2c_core usbcore evdev Pid: 4249, comm: modprobe Not tainted (2.6.27-gentoo #3) EIP: 0060:[] EFLAGS: 00010296 CPU: 0 EIP is at i2c_transfer+0x1f/0x80 [i2c_core] EAX: 00000000 EBX: ffffffa1 ECX: 00000002 EDX: d6c71e3c ESI: d80cd050 EDI: d8093c00 EBP: d6c71e20 ESP: d6c71e0c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-dvb.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index cf6c30d4e54..309ca5e6806 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -598,6 +598,11 @@ static int dvb_register(struct cx8802_dev *dev) struct videobuf_dvb_frontend *fe0, *fe1 = NULL; int mfe_shared = 0; /* bus not shared by default */ + if (0 != core->i2c_rc) { + printk(KERN_ERR "%s/2: no i2c-bus available, cannot attach dvb drivers\n", core->name); + goto frontend_detach; + } + /* Get the first frontend */ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); if (!fe0) -- cgit v1.2.3-70-g09d2 From bdb6ee32536b881085a99fabff7bdfe359e3461b Mon Sep 17 00:00:00 2001 From: Thierry MERLE Date: Thu, 23 Oct 2008 17:49:49 -0300 Subject: V4L/DVB (9358): CinergyT2: fix Kconfig typo config\tDVB_USB_CINERGY_T2 causes the make_kconfig.pl to forget to enable by default the compilation of cinergyT2 module. Signed-off-by: Thierry MERLE Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 47488a97a85..62b68c291d9 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -261,7 +261,7 @@ config DVB_USB_DW2102 Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers and the TeVii S650. -config DVB_USB_CINERGY_T2 +config DVB_USB_CINERGY_T2 tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver" depends on DVB_USB help -- cgit v1.2.3-70-g09d2 From e8deeae24f8b55a7203bec9b056593d9c62fae68 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 22 Oct 2008 10:57:37 -0300 Subject: V4L/DVB (9367a): Add gspca driver and subdrivers to MAINTAINERS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Costantino Leandro Signed-off-by: Erik Andrén Signed-off-by: Frank Zago Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- MAINTAINERS | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 7e6a17e1de0..53e78c83cc7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1879,6 +1879,37 @@ M: linux-kernel@vger.kernel.org W: http://www.kernel.org/pub/linux/kernel/people/rml/hdaps/ S: Maintained +GSPCA FINEPIX SUBDRIVER +P: Frank Zago +M: frank@zago.net +L: video4linux-list@redhat.com +S: Maintained + +GSPCA M5602 SUBDRIVER +P: Erik Andren +M: erik.andren@gmail.com +L: video4linux-list@redhat.com +S: Maintained + +GSPCA PAC207 SONIXB SUBDRIVER +P: Hans de Goede +M: hdegoede@redhat.com +L: video4linux-list@redhat.com +S: Maintained + +GSPCA T613 SUBDRIVER +P: Leandro Costantino +M: lcostantino@gmail.com +L: video4linux-list@redhat.com +S: Maintained + +GSPCA USB WEBCAM DRIVER +P: Jean-Francois Moine +M: moinejf@free.fr +W: http://moinejf.free.fr +L: video4linux-list@redhat.com +S: Maintained + HARDWARE MONITORING L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.org/ -- cgit v1.2.3-70-g09d2 From b058e3f39508a3876a4fbf4a92398c817cf82809 Mon Sep 17 00:00:00 2001 From: Rafael Diniz Date: Fri, 24 Oct 2008 23:07:57 -0300 Subject: V4L/DVB (9368): VBI fix for cx88 cards The attached patch fix VBI support cx88 card. I'm running a capture for hours, getting the closed caption from it[1], and it's working perfect - the output is the same of a bttv card. Please apply this patch as soon as possible. [1] - using zvbi-ntsc-cc of zvbi project. Signed-off-by: Rafael Diniz Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-video.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 61265fd04d5..b96ce991d96 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -1216,8 +1216,12 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) struct cx8800_fh *fh = priv; struct cx8800_dev *dev = fh->dev; - if (unlikely(fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)) + /* We should remember that this driver also supports teletext, */ + /* so we have to test if the v4l2_buf_type is VBI capture data. */ + if (unlikely((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE))) return -EINVAL; + if (unlikely(i != fh->type)) return -EINVAL; @@ -1232,8 +1236,10 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) struct cx8800_dev *dev = fh->dev; int err, res; - if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + if ((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE)) return -EINVAL; + if (i != fh->type) return -EINVAL; -- cgit v1.2.3-70-g09d2 From 0d0f1e0a1d6ef2d0ea249930c5ea71d990fc0b6e Mon Sep 17 00:00:00 2001 From: Rafael Diniz Date: Wed, 22 Oct 2008 18:02:09 -0300 Subject: V4L/DVB (9369): Documentation update for cx88 Attached is a patch that updates the cx88 documentation to add the fact the closed caption works for at least NTSC capture. ps: I also updated the wiki at: http://www.linuxtv.org/v4lwiki/index.php/Text_capture#cx88_devices Signed-off-by: Rafael Diniz Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/README.cx88 | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/video4linux/README.cx88 b/Documentation/video4linux/README.cx88 index 06a33a4f52f..166d5960b1a 100644 --- a/Documentation/video4linux/README.cx88 +++ b/Documentation/video4linux/README.cx88 @@ -27,8 +27,8 @@ audio sound card) should be possible, but there is no code yet ... vbi - - some code present. Doesn't crash any more, but also doesn't - work yet ... + - Code present. Works for NTSC closed caption. PAL and other + TV norms may or may not work. how to add support for new cards -- cgit v1.2.3-70-g09d2 From 8182ff69f8675fc1847a399be4eea5e8118a8dd3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 24 Oct 2008 15:08:28 -0300 Subject: V4L/DVB (9372): Minor fixes to the saa7110 driver * Apparently the author of the saa7110 driver was confused by the number of outputs returned by DECODER_GET_CAPABILITIES. Of course a decoder chip has no analog ouputs, but it must have at least one digital output. * Fix an off-by-one error when checking the input value of DECODER_SET_INPUT. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7110.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c index adf2ba79496..37860698f78 100644 --- a/drivers/media/video/saa7110.c +++ b/drivers/media/video/saa7110.c @@ -47,7 +47,7 @@ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0-1)"); #define SAA7110_MAX_INPUT 9 /* 6 CVBS, 3 SVHS */ -#define SAA7110_MAX_OUTPUT 0 /* its a decoder only */ +#define SAA7110_MAX_OUTPUT 1 /* 1 YUV */ #define SAA7110_NR_REG 0x35 @@ -327,7 +327,7 @@ saa7110_command (struct i2c_client *client, case DECODER_SET_INPUT: v = *(int *) arg; - if (v < 0 || v > SAA7110_MAX_INPUT) { + if (v < 0 || v >= SAA7110_MAX_INPUT) { v4l_dbg(1, debug, client, "input=%d not available\n", v); return -EINVAL; } -- cgit v1.2.3-70-g09d2 From f3a3e881b81ae33b786759c7042de974c1e0bbf7 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 25 Oct 2008 23:27:06 -0300 Subject: V4L/DVB (9475): cx18: Disable write retries for registers that always change - part 1. cx18: Disable write retries for registers that always change - part 1. Interrupt related registers will likely not read back the value we just wrote. Disable retries for these registers for now to avoid accidently discarding interrupts. More intelligent read back verification criteria are needed for these and other registers (e.g. GPIO line registers), which will be addressed in subsequent changes. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-io.c | 4 ++-- drivers/media/video/cx18/cx18-irq.c | 6 +++--- drivers/media/video/cx18/cx18-mailbox.c | 4 ++-- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c index 700ab9439c1..31be5e8684d 100644 --- a/drivers/media/video/cx18/cx18-io.c +++ b/drivers/media/video/cx18/cx18-io.c @@ -218,7 +218,7 @@ void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count) void cx18_sw1_irq_enable(struct cx18 *cx, u32 val) { u32 r; - cx18_write_reg(cx, val, SW1_INT_STATUS); + cx18_write_reg_noretry(cx, val, SW1_INT_STATUS); r = cx18_read_reg(cx, SW1_INT_ENABLE_PCI); cx18_write_reg(cx, r | val, SW1_INT_ENABLE_PCI); } @@ -233,7 +233,7 @@ void cx18_sw1_irq_disable(struct cx18 *cx, u32 val) void cx18_sw2_irq_enable(struct cx18 *cx, u32 val) { u32 r; - cx18_write_reg(cx, val, SW2_INT_STATUS); + cx18_write_reg_noretry(cx, val, SW2_INT_STATUS); r = cx18_read_reg(cx, SW2_INT_ENABLE_PCI); cx18_write_reg(cx, r | val, SW2_INT_ENABLE_PCI); } diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index 360330f5463..447fc9c391a 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -149,9 +149,9 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU; sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask; - cx18_write_reg(cx, sw2&sw2_mask, SW2_INT_STATUS); - cx18_write_reg(cx, sw1&sw1_mask, SW1_INT_STATUS); - cx18_write_reg(cx, hw2&hw2_mask, HW2_INT_CLR_STATUS); + cx18_write_reg_noretry(cx, sw2&sw2_mask, SW2_INT_STATUS); + cx18_write_reg_noretry(cx, sw1&sw1_mask, SW1_INT_STATUS); + cx18_write_reg_noretry(cx, hw2&hw2_mask, HW2_INT_CLR_STATUS); if (sw1 || sw2 || hw2) CX18_DEBUG_HI_IRQ("SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2); diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index 9d18dd22de7..87f7c8e2c18 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -176,7 +176,7 @@ long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb) cx18_setup_page(cx, SCB_OFFSET); cx18_write_sync(cx, mb->request, &ack_mb->ack); - cx18_write_reg(cx, ack_irq, SW2_INT_SET); + cx18_write_reg_noretry(cx, ack_irq, SW2_INT_SET); return 0; } @@ -225,7 +225,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) } if (info->flags & API_FAST) timeout /= 2; - cx18_write_reg(cx, irq, SW1_INT_SET); + cx18_write_reg_noretry(cx, irq, SW1_INT_SET); while (!sig && cx18_readl(cx, &mb->ack) != cx18_readl(cx, &mb->request) && cnt < 660) { -- cgit v1.2.3-70-g09d2 From 6aadf82eb830cf2622f8803fd7f0414299e246d3 Mon Sep 17 00:00:00 2001 From: Tobias Lorenz Date: Tue, 28 Oct 2008 08:48:27 -0300 Subject: V4L/DVB (9482): Documentation, especially regarding audio and informational links This patch adds a recommendation to select SND_USB_AUDIO for listing and adds a documentation file for si470x. Signed-off-by: Tobias Lorenz Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/si470x.txt | 118 +++++++++++++++++++++++++++++++++++ drivers/media/radio/Kconfig | 14 +++++ drivers/media/radio/radio-si470x.c | 13 ---- 3 files changed, 132 insertions(+), 13 deletions(-) create mode 100644 Documentation/video4linux/si470x.txt diff --git a/Documentation/video4linux/si470x.txt b/Documentation/video4linux/si470x.txt new file mode 100644 index 00000000000..11c5fd22a33 --- /dev/null +++ b/Documentation/video4linux/si470x.txt @@ -0,0 +1,118 @@ +Driver for USB radios for the Silicon Labs Si470x FM Radio Receivers + +Copyright (c) 2008 Tobias Lorenz + + +Information from Silicon Labs +============================= +Silicon Laboratories is the manufacturer of the radio ICs, that nowadays are the +most often used radio receivers in cell phones. Usually they are connected with +I2C. But SiLabs also provides a reference design, which integrates this IC, +together with a small microcontroller C8051F321, to form a USB radio. +Part of this reference design is also a radio application in binary and source +code. The software also contains an automatic firmware upgrade to the most +current version. Information on these can be downloaded here: +http://www.silabs.com/usbradio + + +Supported ICs +============= +The following ICs have a very similar register set, so that they are or will be +supported somewhen by the driver: +- Si4700: FM radio receiver +- Si4701: FM radio receiver, RDS Support +- Si4702: FM radio receiver +- Si4703: FM radio receiver, RDS Support +- Si4704: FM radio receiver, no external antenna required +- Si4705: FM radio receiver, no external antenna required, RDS support, Dig I/O +- Si4706: Enhanced FM RDS/TMC radio receiver, no external antenna required, RDS + Support +- Si4707: Dedicated weather band radio receiver with SAME decoder, RDS Support +- Si4708: Smallest FM receivers +- Si4709: Smallest FM receivers, RDS Support +More information on these can be downloaded here: +http://www.silabs.com/products/mcu/Pages/USBFMRadioRD.aspx + + +Supported USB devices +===================== +Currently the following USB radios (vendor:product) with the Silicon Labs si470x +chips are known to work: +- 10c4:818a: Silicon Labs USB FM Radio Reference Design +- 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) (RDX-155-EF) +- 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700) + + +Software +======== +Testing is usually done with most application under Debian/testing: +- fmtools - Utility for managing FM tuner cards +- gnomeradio - FM-radio tuner for the GNOME desktop +- gradio - GTK FM radio tuner +- kradio - Comfortable Radio Application for KDE +- radio - ncurses-based radio application + +There is also a library libv4l, which can be used. It's going to have a function +for frequency seeking, either by using hardware functionality as in radio-si470x +or by implementing a function as we currently have in every of the mentioned +programs. Somewhen the radio programs should make use of libv4l. + +For processing RDS information, there is a project ongoing at: +http://rdsd.berlios.de/ + +There is currently no project for making TMC sentences human readable. + + +Audio Listing +============= +USB Audio is provided by the ALSA snd_usb_audio module. It is recommended to +also select SND_USB_AUDIO, as this is required to get sound from the radio. For +listing you have to redirect the sound, for example using one of the following +commands. + +If you just want to test audio (very poor quality): +cat /dev/dsp1 > /dev/dsp + +If you use OSS try: +sox -2 --endian little -r 96000 -t oss /dev/dsp1 -t oss /dev/dsp + +If you use arts try: +arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B - + + +Module Parameters +================= +After loading the module, you still have access to some of them in the sysfs +mount under /sys/module/radio_si470x/parameters. The contents of read-only files +(0444) are not updated, even if space, band and de are changed using private +video controls. The others are runtime changeable. + + +Errors +====== +Increase tune_timeout, if you often get -EIO errors. + +When timed out or band limit is reached, hw_freq_seek returns -EAGAIN. + +If you get any errors from snd_usb_audio, please report them to the ALSA people. + + +Open Issues +=========== +V4L minor device allocation and parameter setting is not perfect. A solution is +currently under discussion. + +There is an USB interface for downloading/uploading new firmware images. Support +for it can be implemented using the request_firmware interface. + +There is a RDS interrupt mode. The driver is already using the same interface +for polling RDS information, but is currently not using the interrupt mode. + +There is a LED interface, which can be used to override the LED control +programmed in the firmware. This can be made available using the LED support +functions in the kernel. + + +Other useful information and links +================================== +http://www.silabs.com/usbradio diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 04cd7c04bdd..5189c4eb439 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -355,6 +355,20 @@ config USB_SI470X tristate "Silicon Labs Si470x FM Radio Receiver support" depends on USB && VIDEO_V4L2 ---help--- + This is a driver for USB devices with the Silicon Labs SI470x + chip. Currently these devices are known to work: + - 10c4:818a: Silicon Labs USB FM Radio Reference Design + - 06e1:a155: ADS/Tech FM Radio Receiver (formerly Instant FM Music) + - 1b80:d700: KWorld USB FM Radio SnapMusic Mobile 700 (FM700) + + Sound is provided by the ALSA USB Audio/MIDI driver. Therefore + if you don't want to use the device solely for RDS receiving, + it is recommended to also select SND_USB_AUDIO. + + Please have a look at the documentation, especially on how + to redirect the audio stream from the radio to your sound device: + Documentation/video4linux/si470x.txt + Say Y here if you want to connect this type of radio to your computer's USB port. diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index a20583c13b6..3e1830293de 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -24,19 +24,6 @@ */ -/* - * User Notes: - * - USB Audio is provided by the alsa snd_usb_audio module. - * For listing you have to redirect the sound, for example using: - * arecord -D hw:1,0 -r96000 -c2 -f S16_LE | artsdsp aplay -B - - * - regarding module parameters in /sys/module/radio_si470x/parameters: - * the contents of read-only files (0444) are not updated, even if - * space, band and de are changed using private video controls - * - increase tune_timeout, if you often get -EIO errors - * - hw_freq_seek returns -EAGAIN, when timed out or band limit is reached - */ - - /* * History: * 2008-01-12 Tobias Lorenz -- cgit v1.2.3-70-g09d2 From 6a95ec590647989089b86a6d04c5f064240cb033 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 28 Oct 2008 10:44:12 -0300 Subject: V4L/DVB (9485): ivtv: remove incorrect V4L1 & tvaudio dependency ivtv used tvaudio in the past and at the time tvaudio required V4L1. Since tvaudio is no longer dependent on V4L1 and since ivtv actually no longer uses tvaudio at all, this is no removed from Kconfig. Without this patch ivtv won't be build if V4L1 is disabled. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig index 0069898bdda..d62f2bb5cf0 100644 --- a/drivers/media/video/ivtv/Kconfig +++ b/drivers/media/video/ivtv/Kconfig @@ -1,6 +1,6 @@ config VIDEO_IVTV tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support" - depends on VIDEO_V4L1 && VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL + depends on VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL depends on INPUT # due to VIDEO_IR select I2C_ALGOBIT select VIDEO_IR @@ -12,7 +12,6 @@ config VIDEO_IVTV select VIDEO_SAA711X select VIDEO_SAA717X select VIDEO_SAA7127 - select VIDEO_TVAUDIO select VIDEO_CS53L32A select VIDEO_M52790 select VIDEO_WM8775 -- cgit v1.2.3-70-g09d2 From 7c34158f206dca89c717e6818d04b8db187155a3 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 28 Oct 2008 10:45:46 -0300 Subject: V4L/DVB (9486): ivtv/ivtvfb: no longer experimental Remove the EXPERIMENTAL tag. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig index d62f2bb5cf0..c46bfb1569e 100644 --- a/drivers/media/video/ivtv/Kconfig +++ b/drivers/media/video/ivtv/Kconfig @@ -1,6 +1,6 @@ config VIDEO_IVTV tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support" - depends on VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL + depends on VIDEO_V4L2 && PCI && I2C depends on INPUT # due to VIDEO_IR select I2C_ALGOBIT select VIDEO_IR @@ -31,7 +31,7 @@ config VIDEO_IVTV config VIDEO_FB_IVTV tristate "Conexant cx23415 framebuffer support" - depends on VIDEO_IVTV && FB && EXPERIMENTAL + depends on VIDEO_IVTV && FB select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT -- cgit v1.2.3-70-g09d2 From 8268c8f54505e5b952d1705a7bf3b2a218ed26bf Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Mon, 2 Jun 2008 20:05:14 -0300 Subject: V4L/DVB (9492): unplug oops from dvb_frontend_init... When inadvertently hot-unplugging a WT-220U USB DVB-T receiver with 2.6.24, I was met with an oops [1]. The problem is relevant to 2.6.25/26-rc also. dvb_frontend_init() was called either from re-creation of the kdvb-fe0 thread - seems unlikely, or someone called dvb_frontend_reinitialise(), causing this path in the thread - really unlikely, as I can't find any call-site for it. Either way, quite a number of drivers call dvb_usb_generic_rw() [2] without checking the validity of the relevant member in the dvb_usb_device struct - which had changed. Having dvb_usb_generic_rw() sanity-check and fail (rather than loading from 0x120) seems reasonable defensive programming [3], in light of it being called in this way. The problem with this, is that drivers don't check the return code of the init call [4]. Does it make sense to cook a patch which allows the failure to be propagated back up, or am I missing something else? Thanks, Daniel [83711.538485] dvb-usb: bulk message failed: -71 (1/0) [83711.538875] dvb-usb: bulk message failed: -71 (1/0) [83711.538899] usb 7-5: USB disconnect, address 3 [83711.538905] dvb-usb: bulk message failed: -22 (1/0) [83711.538924] dvb-usb: bulk message failed: -22 (1/0) [83711.538943] dvb-usb: bulk message failed: -22 (1/0) [83711.588979] dvb-usb: bulk message failed: -22 (1/0) [83711.589031] dvb-usb: bulk message failed: -22 (1/0) [83711.589078] dvb-usb: bulk message failed: -22 (1/0) [83711.589122] dvb-usb: bulk message failed: -22 (1/0) [83711.589167] dvb-usb: bulk message failed: -22 (1/0) [83711.639233] dvb-usb: bulk message failed: -22 (1/0) [83711.639282] dvb-usb: bulk message failed: -22 (1/0) [83711.639330] dvb-usb: bulk message failed: -22 (1/0) [83711.639374] dvb-usb: bulk message failed: -22 (1/0) [83711.639421] dvb-usb: bulk message failed: -22 (1/0) [83711.658391] dvb-usb: bulk message failed: -22 (1/0) [83768.174281] dvb-usb: bulk message failed: -22 (2/-32512) [83768.174350] Unable to handle kernel NULL pointer dereference<6>dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully deinitialized and disconnected. [83768.174459] at 0000000000000120 RIP: [83768.174459] [] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.174580] PGD 0 [83768.174643] Oops: 0000 [1] SMP [83768.174723] CPU 0 [83768.174782] Modules linked in: nfsd auth_rpcgss exportfs nfs lockd nfs_acl sunrpc af_packet xt_length ipt_tos ipt_TOS xt_CLASSIFY sch_sfq sch_htb ipt_MASQUERADE ipt_REDIRECT xt_limit xt_state xt_tcpudp iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack iptable_mangle iptable_filter ip_tables x_tables xfs sbp2 parport_pc lp parport loop ftdi_sio usbserial evdev dvb_usb_dtt200u dvb_usb dvb_core i2c_core sky2 iTCO_wdt iTCO_vendor_support snd_hda_intel shpchp snd_pcm snd_timer snd_page_alloc snd_hwdep snd pci_hotplug soundcore ipv6 button intel_agp ext3 jbd mbcache sg sd_mod ata_generic pata_acpi ahci ata_piix libata scsi_mod ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore e1000 thermal processor fan fbcon tileblit font bitblit softcursor fuse [83768.176968] Pid: 5732, comm: kdvb-fe-0 Not tainted 2.6.24-16-server #1 [83768.177009] RIP: 0010:[] [] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.177096] RSP: 0018:ffff810021939df0 EFLAGS: 00010286 [83768.177138] RAX: ffff81003bc7cc00 RBX: 0000000000000001 RCX: 0000000000000000 [83768.177181] RDX: 0000000000000001 RSI: ffff810021939e67 RDI: 0000000000000000 [83768.177223] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [83768.177267] R10: ffff810001009880 R11: 0000000000000001 R12: ffff81003c10b400 [83768.177311] R13: ffff81003c10b5b0 R14: ffff810021939ec0 R15: 0000000000000000 [83768.177354] FS: 0000000000000000(0000) GS:ffffffff805c3000(0000) knlGS:0000000000000000 [83768.177409] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [83768.177449] CR2: 0000000000000120 CR3: 0000000000201000 CR4: 00000000000006e0 [83768.177491] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [83768.177534] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [83768.177576] Process kdvb-fe-0 (pid: 5732, threadinfo ffff810021938000, task ffff81003bd1b7a0) [83768.177629] Stack: ffff81003e9b6828 0000000000000000 ffff8100378369f8 0000000000000000 [83768.177800] ffff81003bd1b7a0 ffff810037836d48 ffff81003bc7cc30 ffff81003c10b400 [83768.177943] ffff81003c10b5b0 ffff810021939ec0 ffff81003c10b5e0 ffffffff88342452 [83768.178054] Call Trace: [83768.178130] [] :dvb_usb_dtt200u:dtt200u_fe_init+0x22/0x30 [83768.178178] [] :dvb_usb:dvb_usb_fe_wakeup+0x3a/0x50 [83768.178229] [] :dvb_core:dvb_frontend_init+0x21/0x70 [83768.178278] [] :dvb_core:dvb_frontend_thread+0x8b/0x370 [83768.178329] [] :dvb_core:dvb_frontend_thread+0x0/0x370 [83768.178382] [] kthread+0x4b/0x80 [83768.178427] [] child_rip+0xa/0x12 [83768.178473] [] kthread+0x0/0x80 [83768.178514] [] child_rip+0x0/0x12 [83768.178557] [83768.178594] [83768.178594] Code: 44 8b 87 20 01 00 00 49 89 f4 45 89 ce 45 85 c0 0f 84 ad 00 [83768.179167] RIP [] :dvb_usb:dvb_usb_generic_rw+0x2f/0x1a0 [83768.179234] RSP [83768.179271] CR2: 0000000000000120 [83768.179419] ---[ end trace dba8483163cb1700 ]--- Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dvb-usb-urb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c index 5cef12a07f7..6fe71c6745e 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c @@ -13,14 +13,14 @@ int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, { int actlen,ret = -ENOMEM; + if (!d || wbuf == NULL || wlen == 0) + return -EINVAL; + if (d->props.generic_bulk_ctrl_endpoint == 0) { err("endpoint for generic control not specified."); return -EINVAL; } - if (wbuf == NULL || wlen == 0) - return -EINVAL; - if ((ret = mutex_lock_interruptible(&d->usb_mutex))) return ret; -- cgit v1.2.3-70-g09d2 From dec0c46ac2af9bbc4a2acd56e5bffbf02f20113e Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Wed, 29 Oct 2008 21:16:04 -0300 Subject: V4L/DVB (9494): anysee: initialize anysee_usb_mutex statically anysee_usb_mutex is initialized at every time the anysee device is probed. If the second anysee device is probed while anysee_usb_mutex is locked by the first anysee device, the mutex is broken. This patch fixes by initialize anysee_usb_mutex statically rather than initialize at probe time. Signed-off-by: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/anysee.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index c786359fba0..cd2edbcaa09 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -46,7 +46,7 @@ module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644); MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -static struct mutex anysee_usb_mutex; +static DEFINE_MUTEX(anysee_usb_mutex); static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen, u8 *rbuf, u8 rlen) @@ -456,8 +456,6 @@ static int anysee_probe(struct usb_interface *intf, struct usb_host_interface *alt; int ret; - mutex_init(&anysee_usb_mutex); - /* There is one interface with two alternate settings. Alternate setting 0 is for bulk transfer. Alternate setting 1 is for isochronous transfer. -- cgit v1.2.3-70-g09d2 From a2482377c9df89daa0cb94252bd1e8829c0e9c2f Mon Sep 17 00:00:00 2001 From: Frederic CAND Date: Thu, 30 Oct 2008 04:46:42 -0300 Subject: V4L/DVB (9495): cx88-blackbird: bugfix: cx88-blackbird-poll-fix Starts encoder not only on a read call but also on a poll command. Signed-off-by: Frederic CAND Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-blackbird.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index 078be631955..ae77450f126 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -1158,6 +1158,10 @@ static unsigned int mpeg_poll(struct file *file, struct poll_table_struct *wait) { struct cx8802_fh *fh = file->private_data; + struct cx8802_dev *dev = fh->dev; + + if (!dev->mpeg_active) + blackbird_start_codec(file, fh); return videobuf_poll_stream(file, &fh->mpegq, wait); } -- cgit v1.2.3-70-g09d2 From 9c8e0a260ed7c8935d7ee8dd51cd1971ef516385 Mon Sep 17 00:00:00 2001 From: Frederic CAND Date: Thu, 30 Oct 2008 04:50:05 -0300 Subject: V4L/DVB (9496): cx88-blackbird: bugfix: cx88-blackbird-mpeg-users Allows multiple access to the mpeg device Signed-off-by: Frederic CAND Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-blackbird.c | 8 ++++++-- drivers/media/video/cx88/cx88.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index ae77450f126..d3ae5b4dfca 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -1078,7 +1078,7 @@ static int mpeg_open(struct inode *inode, struct file *file) } } - if (blackbird_initialize_codec(dev) < 0) { + if (!atomic_read(&dev->core->mpeg_users) && blackbird_initialize_codec(dev) < 0) { if (drv) drv->request_release(drv); unlock_kernel(); @@ -1109,6 +1109,8 @@ static int mpeg_open(struct inode *inode, struct file *file) fh->mpegq.field); unlock_kernel(); + atomic_inc(&dev->core->mpeg_users); + return 0; } @@ -1118,7 +1120,7 @@ static int mpeg_release(struct inode *inode, struct file *file) struct cx8802_dev *dev = fh->dev; struct cx8802_driver *drv = NULL; - if (dev->mpeg_active) + if (dev->mpeg_active && atomic_read(&dev->core->mpeg_users) == 1) blackbird_stop_codec(dev); cx8802_cancel_buffers(fh->dev); @@ -1138,6 +1140,8 @@ static int mpeg_release(struct inode *inode, struct file *file) if (drv) drv->request_release(drv); + atomic_dec(&dev->core->mpeg_users); + return 0; } diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h index 76207c2856b..f4240965be3 100644 --- a/drivers/media/video/cx88/cx88.h +++ b/drivers/media/video/cx88/cx88.h @@ -352,6 +352,7 @@ struct cx88_core { /* various v4l controls */ u32 freq; atomic_t users; + atomic_t mpeg_users; /* cx88-video needs to access cx8802 for hybrid tuner pll access. */ struct cx8802_dev *dvbdev; -- cgit v1.2.3-70-g09d2 From 1a8dc86db1546f60a25f2b5cd071c0091db87146 Mon Sep 17 00:00:00 2001 From: Darron Broad Date: Thu, 30 Oct 2008 05:05:23 -0300 Subject: V4L/DVB (9499): cx88-mpeg: final fix for analogue only compilation + de-alloc fix Final fix for when analogue only is selected for compilation (ie, !CX88_DVB) This tidies up previous fix and adds missing de-alloc memory leak on fault (eg, if fe1 fails to alloc where fe0 was allocated). Signed-off-by: Darron Broad Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx88/cx88-mpeg.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index a1c435b4b1c..3ebdcd1d83f 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -769,10 +769,6 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, struct cx8802_dev *dev; struct cx88_core *core; int err; -#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) - struct videobuf_dvb_frontend *demod; - int i; -#endif /* general setup */ core = cx88_core_get(pci_dev); @@ -803,15 +799,21 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, mutex_init(&dev->frontends.lock); INIT_LIST_HEAD(&dev->frontends.felist); - if (core->board.num_frontends) - printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends); - - for (i = 1; i <= core->board.num_frontends; i++) { - demod = videobuf_dvb_alloc_frontend(&dev->frontends, i); - if(demod == NULL) { - printk(KERN_ERR "%s() failed to alloc\n", __func__); - err = -ENOMEM; - goto fail_free; + if (core->board.num_frontends) { + struct videobuf_dvb_frontend *fe; + int i; + + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, + core->board.num_frontends); + for (i = 1; i <= core->board.num_frontends; i++) { + fe = videobuf_dvb_alloc_frontend(&dev->frontends, i); + if(fe == NULL) { + printk(KERN_ERR "%s() failed to alloc\n", + __func__); + videobuf_dvb_dealloc_frontends(&dev->frontends); + err = -ENOMEM; + goto fail_free; + } } } #endif -- cgit v1.2.3-70-g09d2 From 58ae1c23184772a7b2d02a4a82f5515a7820a155 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 3 Nov 2008 08:06:51 -0300 Subject: V4L/DVB (9506): ivtv/cx18: fix test whether modules should be loaded or not. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-driver.c | 4 ++-- drivers/media/video/ivtv/ivtv-driver.c | 26 +++++++++++++------------- 2 files changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 7a1a7830a6b..6a840f2d81a 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -581,10 +581,10 @@ static void cx18_load_and_init_modules(struct cx18 *cx) #ifdef MODULE /* load modules */ -#ifndef CONFIG_MEDIA_TUNER +#ifdef CONFIG_MEDIA_TUNER_MODULE hw = cx18_request_module(cx, hw, "tuner", CX18_HW_TUNER); #endif -#ifndef CONFIG_VIDEO_CS5345 +#ifdef CONFIG_VIDEO_CS5345_MODULE hw = cx18_request_module(cx, hw, "cs5345", CX18_HW_CS5345); #endif #endif diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index d36485023b6..b69cc1d55e5 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -875,43 +875,43 @@ static void ivtv_load_and_init_modules(struct ivtv *itv) #ifdef MODULE /* load modules */ -#ifndef CONFIG_MEDIA_TUNER +#ifdef CONFIG_MEDIA_TUNER_MODULE hw = ivtv_request_module(itv, hw, "tuner", IVTV_HW_TUNER); #endif -#ifndef CONFIG_VIDEO_CX25840 +#ifdef CONFIG_VIDEO_CX25840_MODULE hw = ivtv_request_module(itv, hw, "cx25840", IVTV_HW_CX25840); #endif -#ifndef CONFIG_VIDEO_SAA711X +#ifdef CONFIG_VIDEO_SAA711X_MODULE hw = ivtv_request_module(itv, hw, "saa7115", IVTV_HW_SAA711X); #endif -#ifndef CONFIG_VIDEO_SAA7127 +#ifdef CONFIG_VIDEO_SAA7127_MODULE hw = ivtv_request_module(itv, hw, "saa7127", IVTV_HW_SAA7127); #endif -#ifndef CONFIG_VIDEO_SAA717X +#ifdef CONFIG_VIDEO_SAA717X_MODULE hw = ivtv_request_module(itv, hw, "saa717x", IVTV_HW_SAA717X); #endif -#ifndef CONFIG_VIDEO_UPD64031A +#ifdef CONFIG_VIDEO_UPD64031A_MODULE hw = ivtv_request_module(itv, hw, "upd64031a", IVTV_HW_UPD64031A); #endif -#ifndef CONFIG_VIDEO_UPD64083 +#ifdef CONFIG_VIDEO_UPD64083_MODULE hw = ivtv_request_module(itv, hw, "upd64083", IVTV_HW_UPD6408X); #endif -#ifndef CONFIG_VIDEO_MSP3400 +#ifdef CONFIG_VIDEO_MSP3400_MODULE hw = ivtv_request_module(itv, hw, "msp3400", IVTV_HW_MSP34XX); #endif -#ifndef CONFIG_VIDEO_VP27SMPX +#ifdef CONFIG_VIDEO_VP27SMPX_MODULE hw = ivtv_request_module(itv, hw, "vp27smpx", IVTV_HW_VP27SMPX); #endif -#ifndef CONFIG_VIDEO_WM8775 +#ifdef CONFIG_VIDEO_WM8775_MODULE hw = ivtv_request_module(itv, hw, "wm8775", IVTV_HW_WM8775); #endif -#ifndef CONFIG_VIDEO_WM8739 +#ifdef CONFIG_VIDEO_WM8739_MODULE hw = ivtv_request_module(itv, hw, "wm8739", IVTV_HW_WM8739); #endif -#ifndef CONFIG_VIDEO_CS53L32A +#ifdef CONFIG_VIDEO_CS53L32A_MODULE hw = ivtv_request_module(itv, hw, "cs53l32a", IVTV_HW_CS53L32A); #endif -#ifndef CONFIG_VIDEO_M52790 +#ifdef CONFIG_VIDEO_M52790_MODULE hw = ivtv_request_module(itv, hw, "m52790", IVTV_HW_M52790); #endif #endif -- cgit v1.2.3-70-g09d2 From f056d29eebd2c8800cf42528ba0470c77a928821 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Fri, 31 Oct 2008 20:49:12 -0300 Subject: V4L/DVB (9510): cx18: Fix write retries for registers that always change - part 2. cx18: Fix write retries for registers that always change - part 2. Some registers, especially interrupt related ones, will never read back the value just written. Modified interrupt register readback checks to make sure the intended effect was achieved. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-io.c | 17 +++++++++++++++-- drivers/media/video/cx18/cx18-io.h | 17 +++++++++++++++++ drivers/media/video/cx18/cx18-irq.c | 19 +++++++++++-------- drivers/media/video/cx18/cx18-mailbox.c | 4 ++-- 4 files changed, 45 insertions(+), 12 deletions(-) diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c index 31be5e8684d..220fae8d4ad 100644 --- a/drivers/media/video/cx18/cx18-io.c +++ b/drivers/media/video/cx18/cx18-io.c @@ -88,6 +88,19 @@ void cx18_writel_retry(struct cx18 *cx, u32 val, void __iomem *addr) cx18_log_write_retries(cx, i, addr); } +void _cx18_writel_expect(struct cx18 *cx, u32 val, void __iomem *addr, + u32 eval, u32 mask) +{ + int i; + eval &= mask; + for (i = 0; i < CX18_MAX_MMIO_RETRIES; i++) { + cx18_writel_noretry(cx, val, addr); + if (eval == (cx18_readl_noretry(cx, addr) & mask)) + break; + } + cx18_log_write_retries(cx, i, addr); +} + void cx18_writew_retry(struct cx18 *cx, u16 val, void __iomem *addr) { int i; @@ -218,7 +231,7 @@ void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count) void cx18_sw1_irq_enable(struct cx18 *cx, u32 val) { u32 r; - cx18_write_reg_noretry(cx, val, SW1_INT_STATUS); + cx18_write_reg_expect(cx, val, SW1_INT_STATUS, ~val, val); r = cx18_read_reg(cx, SW1_INT_ENABLE_PCI); cx18_write_reg(cx, r | val, SW1_INT_ENABLE_PCI); } @@ -233,7 +246,7 @@ void cx18_sw1_irq_disable(struct cx18 *cx, u32 val) void cx18_sw2_irq_enable(struct cx18 *cx, u32 val) { u32 r; - cx18_write_reg_noretry(cx, val, SW2_INT_STATUS); + cx18_write_reg_expect(cx, val, SW2_INT_STATUS, ~val, val); r = cx18_read_reg(cx, SW2_INT_ENABLE_PCI); cx18_write_reg(cx, r | val, SW2_INT_ENABLE_PCI); } diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h index 287a5e8bf67..425244453ea 100644 --- a/drivers/media/video/cx18/cx18-io.h +++ b/drivers/media/video/cx18/cx18-io.h @@ -133,6 +133,8 @@ static inline void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr) cx18_writel_noretry(cx, val, addr); } +void _cx18_writel_expect(struct cx18 *cx, u32 val, void __iomem *addr, + u32 eval, u32 mask); static inline void cx18_writew_noretry(struct cx18 *cx, u16 val, void __iomem *addr) @@ -271,6 +273,21 @@ static inline void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg) cx18_write_reg_noretry(cx, val, reg); } +static inline void _cx18_write_reg_expect(struct cx18 *cx, u32 val, u32 reg, + u32 eval, u32 mask) +{ + _cx18_writel_expect(cx, val, cx->reg_mem + reg, eval, mask); +} + +static inline void cx18_write_reg_expect(struct cx18 *cx, u32 val, u32 reg, + u32 eval, u32 mask) +{ + if (cx18_retry_mmio) + _cx18_write_reg_expect(cx, val, reg, eval, mask); + else + cx18_write_reg_noretry(cx, val, reg); +} + static inline u32 cx18_read_reg_noretry(struct cx18 *cx, u32 reg) { diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index 447fc9c391a..a366259bbb7 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -142,16 +142,19 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) spin_lock(&cx->dma_reg_lock); - hw2_mask = cx18_read_reg(cx, HW2_INT_MASK5_PCI); - hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & hw2_mask; - sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK; - sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask; sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU; sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask; + sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK; + sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask; + hw2_mask = cx18_read_reg(cx, HW2_INT_MASK5_PCI); + hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & hw2_mask; - cx18_write_reg_noretry(cx, sw2&sw2_mask, SW2_INT_STATUS); - cx18_write_reg_noretry(cx, sw1&sw1_mask, SW1_INT_STATUS); - cx18_write_reg_noretry(cx, hw2&hw2_mask, HW2_INT_CLR_STATUS); + if (sw1) + cx18_write_reg_expect(cx, sw1, SW1_INT_STATUS, ~sw1, sw1); + if (sw2) + cx18_write_reg_expect(cx, sw2, SW2_INT_STATUS, ~sw2, sw2); + if (hw2) + cx18_write_reg_expect(cx, hw2, HW2_INT_CLR_STATUS, ~hw2, hw2); if (sw1 || sw2 || hw2) CX18_DEBUG_HI_IRQ("SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2); @@ -178,5 +181,5 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) hpu_cmd(cx, sw1); spin_unlock(&cx->dma_reg_lock); - return (hw2 | sw1 | sw2) ? IRQ_HANDLED : IRQ_NONE; + return (sw1 || sw2 || hw2) ? IRQ_HANDLED : IRQ_NONE; } diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index 87f7c8e2c18..851a905376b 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -176,7 +176,7 @@ long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb) cx18_setup_page(cx, SCB_OFFSET); cx18_write_sync(cx, mb->request, &ack_mb->ack); - cx18_write_reg_noretry(cx, ack_irq, SW2_INT_SET); + cx18_write_reg_expect(cx, ack_irq, SW2_INT_SET, ack_irq, ack_irq); return 0; } @@ -225,7 +225,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) } if (info->flags & API_FAST) timeout /= 2; - cx18_write_reg_noretry(cx, irq, SW1_INT_SET); + cx18_write_reg_expect(cx, irq, SW1_INT_SET, irq, irq); while (!sig && cx18_readl(cx, &mb->ack) != cx18_readl(cx, &mb->request) && cnt < 660) { -- cgit v1.2.3-70-g09d2 From 4e6b61047db2a77a250b6510bdb3c20c41aee591 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 1 Nov 2008 01:07:36 -0300 Subject: V4L/DVB (9511): cx18: Mark CX18_CPU_DE_RELEASE_MDL as a slow API call cx18: Mark CX18_CPU_DE_RELEASE_MDL as a slow API call. Give the encoder time to complete the MDL release before destroying the encoder internal task. This avoids an encoder lockup on the next digital capture and error messages about buffers being returned for an inactive encoder task handle. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-mailbox.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index 851a905376b..acff7dfb60d 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -83,7 +83,7 @@ static const struct cx18_api_info api_info[] = { API_ENTRY(CPU, CX18_CPU_DE_SET_MDL_ACK, 0), API_ENTRY(CPU, CX18_CPU_DE_SET_MDL, API_FAST), API_ENTRY(CPU, CX18_APU_RESETAI, API_FAST), - API_ENTRY(CPU, CX18_CPU_DE_RELEASE_MDL, 0), + API_ENTRY(CPU, CX18_CPU_DE_RELEASE_MDL, API_SLOW), API_ENTRY(0, 0, 0), }; -- cgit v1.2.3-70-g09d2 From 891bd1331eb378f4a474d2377451a97bb306a451 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Tue, 4 Nov 2008 11:32:59 -0300 Subject: V4L/DVB (9524): af9013: fix bug in status reading - ! has a higher precedence than & Signed-off-by: Roel Kluin Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/af9013.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c index 21c1060cf10..692b68a9e73 100644 --- a/drivers/media/dvb/frontends/af9013.c +++ b/drivers/media/dvb/frontends/af9013.c @@ -1187,7 +1187,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) if (tmp) *status |= FE_HAS_SYNC | FE_HAS_LOCK; - if (!*status & FE_HAS_SIGNAL) { + if (!(*status & FE_HAS_SIGNAL)) { /* AGC lock */ ret = af9013_read_reg_bits(state, 0xd1a0, 6, 1, &tmp); if (ret) @@ -1196,7 +1196,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) *status |= FE_HAS_SIGNAL; } - if (!*status & FE_HAS_CARRIER) { + if (!(*status & FE_HAS_CARRIER)) { /* CFO lock */ ret = af9013_read_reg_bits(state, 0xd333, 7, 1, &tmp); if (ret) @@ -1205,7 +1205,7 @@ static int af9013_read_status(struct dvb_frontend *fe, fe_status_t *status) *status |= FE_HAS_CARRIER; } - if (!*status & FE_HAS_CARRIER) { + if (!(*status & FE_HAS_CARRIER)) { /* SFOE lock */ ret = af9013_read_reg_bits(state, 0xd334, 6, 1, &tmp); if (ret) -- cgit v1.2.3-70-g09d2 From 349d042f34cc2a663f22cae2390b240934e61014 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 5 Nov 2008 16:31:24 -0300 Subject: V4L/DVB (9527): af9015: fix compile warnings - use static to avoid compile warnings Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/af9015.c | 14 +++++++------- drivers/media/dvb/dvb-usb/af9015.h | 1 - 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index cb0829c038c..847d8fdd9ec 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -31,13 +31,13 @@ #include "mc44s80x.h" #endif -int dvb_usb_af9015_debug; +static int dvb_usb_af9015_debug; module_param_named(debug, dvb_usb_af9015_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); -int dvb_usb_af9015_remote; +static int dvb_usb_af9015_remote; module_param_named(remote, dvb_usb_af9015_remote, int, 0644); MODULE_PARM_DESC(remote, "select remote"); -int dvb_usb_af9015_dual_mode; +static int dvb_usb_af9015_dual_mode; module_param_named(dual_mode, dvb_usb_af9015_dual_mode, int, 0644); MODULE_PARM_DESC(dual_mode, "enable dual mode"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); @@ -46,7 +46,7 @@ static DEFINE_MUTEX(af9015_usb_mutex); static struct af9015_config af9015_config; static struct dvb_usb_device_properties af9015_properties[2]; -int af9015_properties_count = ARRAY_SIZE(af9015_properties); +static int af9015_properties_count = ARRAY_SIZE(af9015_properties); static struct af9013_config af9015_af9013_config[] = { { @@ -549,7 +549,7 @@ static int af9015_eeprom_dump(struct dvb_usb_device *d) return 0; } -int af9015_download_ir_table(struct dvb_usb_device *d) +static int af9015_download_ir_table(struct dvb_usb_device *d) { int i, packets = 0, ret; u16 addr = 0x9a56; /* ir-table start address */ @@ -999,7 +999,7 @@ static int af9015_rc_query(struct dvb_usb_device *d, u32 *event, int *state) } /* init 2nd I2C adapter */ -int af9015_i2c_init(struct dvb_usb_device *d) +static int af9015_i2c_init(struct dvb_usb_device *d) { int ret; struct af9015_state *state = d->priv; @@ -1419,7 +1419,7 @@ static int af9015_usb_probe(struct usb_interface *intf, return ret; } -void af9015_i2c_exit(struct dvb_usb_device *d) +static void af9015_i2c_exit(struct dvb_usb_device *d) { struct af9015_state *state = d->priv; deb_info("%s: \n", __func__); diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h index 882e8a4b368..6c3c9729331 100644 --- a/drivers/media/dvb/dvb-usb/af9015.h +++ b/drivers/media/dvb/dvb-usb/af9015.h @@ -27,7 +27,6 @@ #define DVB_USB_LOG_PREFIX "af9015" #include "dvb-usb.h" -extern int dvb_usb_af9015_debug; #define deb_info(args...) dprintk(dvb_usb_af9015_debug, 0x01, args) #define deb_rc(args...) dprintk(dvb_usb_af9015_debug, 0x02, args) #define deb_xfer(args...) dprintk(dvb_usb_af9015_debug, 0x04, args) -- cgit v1.2.3-70-g09d2 From 17ff61cb200e8ec0c8e456fbd426c1af63a6e28a Mon Sep 17 00:00:00 2001 From: Frederic CAND Date: Wed, 29 Oct 2008 14:37:49 -0300 Subject: V4L/DVB (9493): kconfig patch Ok I made a patch that converts gspca kconfig file to a more standard= one, with tabs + 2 white spaces, so that if a warning is added it still compiles please find it attached Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/Kconfig | 142 +++++++++++++++++++------------------- 1 file changed, 71 insertions(+), 71 deletions(-) diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index 4d0817471c9..96a16db3d7a 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -3,16 +3,16 @@ menuconfig USB_GSPCA depends on VIDEO_V4L2 default m ---help--- - Say Y here if you want to enable selecting webcams based - on the GSPCA framework. + Say Y here if you want to enable selecting webcams based + on the GSPCA framework. - See for more info. + See for more info. - This driver uses the Video For Linux API. You must say Y or M to - "Video For Linux" to use this driver. + This driver uses the Video For Linux API. You must say Y or M to + "Video For Linux" to use this driver. - To compile this driver as modules, choose M here: the - modules will be called gspca_main. + To compile this driver as modules, choose M here: the + modules will be called gspca_main. if USB_GSPCA && VIDEO_V4L2 @@ -23,190 +23,190 @@ config USB_GSPCA_CONEX tristate "Conexant Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the Conexant chip. + Say Y here if you want support for cameras based on the Conexant chip. - To compile this driver as a module, choose M here: the - module will be called gspca_conex. + To compile this driver as a module, choose M here: the + module will be called gspca_conex. config USB_GSPCA_ETOMS tristate "Etoms USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the Etoms chip. + Say Y here if you want support for cameras based on the Etoms chip. - To compile this driver as a module, choose M here: the - module will be called gspca_etoms. + To compile this driver as a module, choose M here: the + module will be called gspca_etoms. config USB_GSPCA_FINEPIX tristate "Fujifilm FinePix USB V4L2 driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the FinePix chip. + Say Y here if you want support for cameras based on the FinePix chip. - To compile this driver as a module, choose M here: the - module will be called gspca_finepix. + To compile this driver as a module, choose M here: the + module will be called gspca_finepix. config USB_GSPCA_MARS tristate "Mars USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the Mars chip. + Say Y here if you want support for cameras based on the Mars chip. - To compile this driver as a module, choose M here: the - module will be called gspca_mars. + To compile this driver as a module, choose M here: the + module will be called gspca_mars. config USB_GSPCA_OV519 tristate "OV519 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the OV519 chip. + Say Y here if you want support for cameras based on the OV519 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_ov519. + To compile this driver as a module, choose M here: the + module will be called gspca_ov519. config USB_GSPCA_PAC207 tristate "Pixart PAC207 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the PAC207 chip. + Say Y here if you want support for cameras based on the PAC207 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_pac207. + To compile this driver as a module, choose M here: the + module will be called gspca_pac207. config USB_GSPCA_PAC7311 tristate "Pixart PAC7311 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the PAC7311 chip. + Say Y here if you want support for cameras based on the PAC7311 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_pac7311. + To compile this driver as a module, choose M here: the + module will be called gspca_pac7311. config USB_GSPCA_SONIXB tristate "SN9C102 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SONIXB chip. + Say Y here if you want support for cameras based on the SONIXB chip. - To compile this driver as a module, choose M here: the - module will be called gspca_sonixb. + To compile this driver as a module, choose M here: the + module will be called gspca_sonixb. config USB_GSPCA_SONIXJ tristate "SONIX JPEG USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SONIXJ chip. + Say Y here if you want support for cameras based on the SONIXJ chip. - To compile this driver as a module, choose M here: the - module will be called gspca_sonixj + To compile this driver as a module, choose M here: the + module will be called gspca_sonixj config USB_GSPCA_SPCA500 tristate "SPCA500 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA500 chip. + Say Y here if you want support for cameras based on the SPCA500 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca500. + To compile this driver as a module, choose M here: the + module will be called gspca_spca500. config USB_GSPCA_SPCA501 tristate "SPCA501 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA501 chip. + Say Y here if you want support for cameras based on the SPCA501 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca501. + To compile this driver as a module, choose M here: the + module will be called gspca_spca501. config USB_GSPCA_SPCA505 tristate "SPCA505 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA505 chip. + Say Y here if you want support for cameras based on the SPCA505 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca505. + To compile this driver as a module, choose M here: the + module will be called gspca_spca505. config USB_GSPCA_SPCA506 tristate "SPCA506 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA506 chip. + Say Y here if you want support for cameras based on the SPCA506 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca506. + To compile this driver as a module, choose M here: the + module will be called gspca_spca506. config USB_GSPCA_SPCA508 tristate "SPCA508 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA508 chip. + Say Y here if you want support for cameras based on the SPCA508 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca508. + To compile this driver as a module, choose M here: the + module will be called gspca_spca508. config USB_GSPCA_SPCA561 tristate "SPCA561 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the SPCA561 chip. + Say Y here if you want support for cameras based on the SPCA561 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_spca561. + To compile this driver as a module, choose M here: the + module will be called gspca_spca561. config USB_GSPCA_STK014 tristate "Syntek DV4000 (STK014) USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the STK014 chip. + Say Y here if you want support for cameras based on the STK014 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_stk014. + To compile this driver as a module, choose M here: the + module will be called gspca_stk014. config USB_GSPCA_SUNPLUS tristate "SUNPLUS USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the Sunplus - SPCA504(abc) SPCA533 SPCA536 chips. + Say Y here if you want support for cameras based on the Sunplus + SPCA504(abc) SPCA533 SPCA536 chips. - To compile this driver as a module, choose M here: the - module will be called gspca_spca5xx. + To compile this driver as a module, choose M here: the + module will be called gspca_spca5xx. config USB_GSPCA_T613 tristate "T613 (JPEG Compliance) USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the T613 chip. + Say Y here if you want support for cameras based on the T613 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_t613. + To compile this driver as a module, choose M here: the + module will be called gspca_t613. config USB_GSPCA_TV8532 tristate "TV8532 USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the TV8531 chip. + Say Y here if you want support for cameras based on the TV8531 chip. - To compile this driver as a module, choose M here: the - module will be called gspca_tv8532. + To compile this driver as a module, choose M here: the + module will be called gspca_tv8532. config USB_GSPCA_VC032X tristate "VC032X USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the VC032X chip. + Say Y here if you want support for cameras based on the VC032X chip. - To compile this driver as a module, choose M here: the - module will be called gspca_vc032x. + To compile this driver as a module, choose M here: the + module will be called gspca_vc032x. config USB_GSPCA_ZC3XX tristate "VC3xx USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help - Say Y here if you want support for cameras based on the ZC3XX chip. + Say Y here if you want support for cameras based on the ZC3XX chip. - To compile this driver as a module, choose M here: the - module will be called gspca_zc3xx. + To compile this driver as a module, choose M here: the + module will be called gspca_zc3xx. endif -- cgit v1.2.3-70-g09d2 From 465f8a805d3796fac2b2fb0c630217f6f76e667c Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Tue, 4 Nov 2008 22:02:23 -0300 Subject: V4L/DVB (9515): cx18: Use correct Mailbox IRQ Ack values and misc IRQ handling cleanup cx18: Use correct Mailbox IRQ Ack values and misc IRQ handling cleanup. The SCB field definitions for Ack IRQ's for mailboxes were inconsistent with the bitmasks being loaded into those SCB fields and the SW2 Ack IRQ handling logic. Renamed fields in SCB to make things consistent and did misc IRQ handling cleanups: removing legacy ivtv dma_reg_lock, HPU IRQ flags, etc. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-driver.c | 1 - drivers/media/video/cx18/cx18-driver.h | 2 -- drivers/media/video/cx18/cx18-irq.c | 54 ++++++++++++++++++---------------- drivers/media/video/cx18/cx18-scb.h | 40 ++++++++++++------------- 4 files changed, 49 insertions(+), 48 deletions(-) diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 6a840f2d81a..2befa3819cd 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -448,7 +448,6 @@ static int __devinit cx18_init_struct1(struct cx18 *cx) mutex_init(&cx->gpio_lock); spin_lock_init(&cx->lock); - spin_lock_init(&cx->dma_reg_lock); /* start counting open_id at 1 */ cx->open_id = 1; diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index a4b1708fafe..e721c01d217 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -402,8 +402,6 @@ struct cx18 { spinlock_t lock; /* lock access to this struct */ int search_pack_header; - spinlock_t dma_reg_lock; /* lock access to DMA engine registers */ - int open_id; /* incremented each time an open occurs, used as unique ID. Starts at 1, so 0 can be used as uninitialized value in the stream->id. */ diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index a366259bbb7..c306e142c1c 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -30,8 +30,6 @@ #include "cx18-vbi.h" #include "cx18-scb.h" -#define DMA_MAGIC_COOKIE 0x000001fe - static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) { u32 handle = mb->args[0]; @@ -109,7 +107,7 @@ static void epu_debug(struct cx18 *cx, struct cx18_mailbox *mb) CX18_INFO("FW version: %s\n", p - 1); } -static void hpu_cmd(struct cx18 *cx, u32 sw1) +static void epu_cmd(struct cx18 *cx, u32 sw1) { struct cx18_mailbox mb; @@ -125,12 +123,31 @@ static void hpu_cmd(struct cx18 *cx, u32 sw1) epu_debug(cx, &mb); break; default: - CX18_WARN("Unexpected mailbox command %08x\n", mb.cmd); + CX18_WARN("Unknown CPU_TO_EPU mailbox command %#08x\n", + mb.cmd); break; } } - if (sw1 & (IRQ_APU_TO_EPU | IRQ_HPU_TO_EPU)) - CX18_WARN("Unexpected interrupt %08x\n", sw1); + + if (sw1 & IRQ_APU_TO_EPU) { + cx18_memcpy_fromio(cx, &mb, &cx->scb->apu2epu_mb, sizeof(mb)); + CX18_WARN("Unknown APU_TO_EPU mailbox command %#08x\n", mb.cmd); + } + + if (sw1 & IRQ_HPU_TO_EPU) { + cx18_memcpy_fromio(cx, &mb, &cx->scb->hpu2epu_mb, sizeof(mb)); + CX18_WARN("Unknown HPU_TO_EPU mailbox command %#08x\n", mb.cmd); + } +} + +static void xpu_ack(struct cx18 *cx, u32 sw2) +{ + if (sw2 & IRQ_CPU_TO_EPU_ACK) + wake_up(&cx->mb_cpu_waitq); + if (sw2 & IRQ_APU_TO_EPU_ACK) + wake_up(&cx->mb_apu_waitq); + if (sw2 & IRQ_HPU_TO_EPU_ACK) + wake_up(&cx->mb_hpu_waitq); } irqreturn_t cx18_irq_handler(int irq, void *dev_id) @@ -140,11 +157,9 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) u32 sw2, sw2_mask; u32 hw2, hw2_mask; - spin_lock(&cx->dma_reg_lock); - - sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU; + sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI); sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask; - sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK; + sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI); sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask; hw2_mask = cx18_read_reg(cx, HW2_INT_MASK5_PCI); hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & hw2_mask; @@ -160,26 +175,15 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) CX18_DEBUG_HI_IRQ("SW1: %x SW2: %x HW2: %x\n", sw1, sw2, hw2); /* To do: interrupt-based I2C handling - if (hw2 & 0x00c00000) { + if (hw2 & (HW2_I2C1_INT|HW2_I2C2_INT)) { } */ - if (sw2) { - if (sw2 & (cx18_readl(cx, &cx->scb->cpu2hpu_irq_ack) | - cx18_readl(cx, &cx->scb->cpu2epu_irq_ack))) - wake_up(&cx->mb_cpu_waitq); - if (sw2 & (cx18_readl(cx, &cx->scb->apu2hpu_irq_ack) | - cx18_readl(cx, &cx->scb->apu2epu_irq_ack))) - wake_up(&cx->mb_apu_waitq); - if (sw2 & cx18_readl(cx, &cx->scb->epu2hpu_irq_ack)) - wake_up(&cx->mb_epu_waitq); - if (sw2 & cx18_readl(cx, &cx->scb->hpu2epu_irq_ack)) - wake_up(&cx->mb_hpu_waitq); - } + if (sw2) + xpu_ack(cx, sw2); if (sw1) - hpu_cmd(cx, sw1); - spin_unlock(&cx->dma_reg_lock); + epu_cmd(cx, sw1); return (sw1 || sw2 || hw2) ? IRQ_HANDLED : IRQ_NONE; } diff --git a/drivers/media/video/cx18/cx18-scb.h b/drivers/media/video/cx18/cx18-scb.h index 86b4cb15d16..594713bbed6 100644 --- a/drivers/media/video/cx18/cx18-scb.h +++ b/drivers/media/video/cx18/cx18-scb.h @@ -128,22 +128,22 @@ struct cx18_scb { u32 apu2cpu_irq; /* Value to write to register SW2 register set (0xC7003140) after the command is cleared */ - u32 apu2cpu_irq_ack; + u32 cpu2apu_irq_ack; u32 reserved2[13]; u32 hpu2cpu_mb_offset; u32 hpu2cpu_irq; - u32 hpu2cpu_irq_ack; + u32 cpu2hpu_irq_ack; u32 reserved3[13]; u32 ppu2cpu_mb_offset; u32 ppu2cpu_irq; - u32 ppu2cpu_irq_ack; + u32 cpu2ppu_irq_ack; u32 reserved4[13]; u32 epu2cpu_mb_offset; u32 epu2cpu_irq; - u32 epu2cpu_irq_ack; + u32 cpu2epu_irq_ack; u32 reserved5[13]; u32 reserved6[8]; @@ -153,22 +153,22 @@ struct cx18_scb { u32 reserved11[7]; u32 cpu2apu_mb_offset; u32 cpu2apu_irq; - u32 cpu2apu_irq_ack; + u32 apu2cpu_irq_ack; u32 reserved12[13]; u32 hpu2apu_mb_offset; u32 hpu2apu_irq; - u32 hpu2apu_irq_ack; + u32 apu2hpu_irq_ack; u32 reserved13[13]; u32 ppu2apu_mb_offset; u32 ppu2apu_irq; - u32 ppu2apu_irq_ack; + u32 apu2ppu_irq_ack; u32 reserved14[13]; u32 epu2apu_mb_offset; u32 epu2apu_irq; - u32 epu2apu_irq_ack; + u32 apu2epu_irq_ack; u32 reserved15[13]; u32 reserved16[8]; @@ -178,22 +178,22 @@ struct cx18_scb { u32 reserved21[7]; u32 cpu2hpu_mb_offset; u32 cpu2hpu_irq; - u32 cpu2hpu_irq_ack; + u32 hpu2cpu_irq_ack; u32 reserved22[13]; u32 apu2hpu_mb_offset; u32 apu2hpu_irq; - u32 apu2hpu_irq_ack; + u32 hpu2apu_irq_ack; u32 reserved23[13]; u32 ppu2hpu_mb_offset; u32 ppu2hpu_irq; - u32 ppu2hpu_irq_ack; + u32 hpu2ppu_irq_ack; u32 reserved24[13]; u32 epu2hpu_mb_offset; u32 epu2hpu_irq; - u32 epu2hpu_irq_ack; + u32 hpu2epu_irq_ack; u32 reserved25[13]; u32 reserved26[8]; @@ -203,22 +203,22 @@ struct cx18_scb { u32 reserved31[7]; u32 cpu2ppu_mb_offset; u32 cpu2ppu_irq; - u32 cpu2ppu_irq_ack; + u32 ppu2cpu_irq_ack; u32 reserved32[13]; u32 apu2ppu_mb_offset; u32 apu2ppu_irq; - u32 apu2ppu_irq_ack; + u32 ppu2apu_irq_ack; u32 reserved33[13]; u32 hpu2ppu_mb_offset; u32 hpu2ppu_irq; - u32 hpu2ppu_irq_ack; + u32 ppu2hpu_irq_ack; u32 reserved34[13]; u32 epu2ppu_mb_offset; u32 epu2ppu_irq; - u32 epu2ppu_irq_ack; + u32 ppu2epu_irq_ack; u32 reserved35[13]; u32 reserved36[8]; @@ -228,22 +228,22 @@ struct cx18_scb { u32 reserved41[7]; u32 cpu2epu_mb_offset; u32 cpu2epu_irq; - u32 cpu2epu_irq_ack; + u32 epu2cpu_irq_ack; u32 reserved42[13]; u32 apu2epu_mb_offset; u32 apu2epu_irq; - u32 apu2epu_irq_ack; + u32 epu2apu_irq_ack; u32 reserved43[13]; u32 hpu2epu_mb_offset; u32 hpu2epu_irq; - u32 hpu2epu_irq_ack; + u32 epu2hpu_irq_ack; u32 reserved44[13]; u32 ppu2epu_mb_offset; u32 ppu2epu_irq; - u32 ppu2epu_irq_ack; + u32 epu2ppu_irq_ack; u32 reserved45[13]; u32 reserved46[8]; -- cgit v1.2.3-70-g09d2 From 93d0f0385adafc331d070a4e874c8ae686e6179a Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Sat, 25 Oct 2008 05:06:58 -0300 Subject: V4L/DVB (9549): gspca: Fix a typo in one of gspca chips name. Signed-off-by: Krzysztof Helt Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig index 96a16db3d7a..6b557c057fa 100644 --- a/drivers/media/video/gspca/Kconfig +++ b/drivers/media/video/gspca/Kconfig @@ -201,7 +201,7 @@ config USB_GSPCA_VC032X module will be called gspca_vc032x. config USB_GSPCA_ZC3XX - tristate "VC3xx USB Camera Driver" + tristate "ZC3XX USB Camera Driver" depends on VIDEO_V4L2 && USB_GSPCA help Say Y here if you want support for cameras based on the ZC3XX chip. -- cgit v1.2.3-70-g09d2 From 03bf75654cd31610ddd1ea66fab311b5b24700f0 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Thu, 6 Nov 2008 14:47:13 -0300 Subject: V4L/DVB (9556): gspca: Bad init sequence for sensor HV7131B in zc3xx. This patch fixes the H flip and the R & B color inversion of mode 320x240. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/zc3xx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index d0a4451dc46..3e594462b16 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -2266,7 +2266,7 @@ static const struct usb_action hdcs2020b_NoFliker[] = { {} }; -static const struct usb_action hv7131bxx_Initial[] = { +static const struct usb_action hv7131bxx_Initial[] = { /* 320x240 */ {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, {0xa0, 0x10, ZC3XX_R002_CLOCKSELECT}, {0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT}, @@ -2309,7 +2309,7 @@ static const struct usb_action hv7131bxx_Initial[] = { {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05}, {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS}, - {0xaa, 0x02, 0x0080}, /* {0xaa, 0x02, 0x0090}; */ + {0xaa, 0x02, 0x0090}, /* {0xaa, 0x02, 0x0080}; */ {0xa1, 0x01, 0x0002}, {0xa0, 0x00, ZC3XX_R092_I2CADDRESSSELECT}, {0xa0, 0x02, ZC3XX_R090_I2CCOMMAND}, @@ -2374,7 +2374,7 @@ static const struct usb_action hv7131bxx_Initial[] = { {} }; -static const struct usb_action hv7131bxx_InitialScale[] = { +static const struct usb_action hv7131bxx_InitialScale[] = { /* 640x480*/ {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, {0xa0, 0x00, ZC3XX_R002_CLOCKSELECT}, {0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT}, -- cgit v1.2.3-70-g09d2 From c9ff1b689a5d605640f098afc37d6102ecef9876 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Thu, 6 Nov 2008 15:29:47 -0300 Subject: V4L/DVB (9557): gspca: Small changes for the sensor HV7131B in zc3xx. - touch only one register for brightness change - no quality control - don't probe again at streamon time. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/zc3xx.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index 3e594462b16..8b3101d347c 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -2290,7 +2290,7 @@ static const struct usb_action hv7131bxx_Initial[] = { /* 320x240 */ {0xaa, 0x14, 0x0001}, {0xaa, 0x15, 0x00e8}, {0xaa, 0x16, 0x0002}, - {0xaa, 0x17, 0x0086}, + {0xaa, 0x17, 0x0086}, /* 00,17,88,aa */ {0xaa, 0x31, 0x0038}, {0xaa, 0x32, 0x0038}, {0xaa, 0x33, 0x0038}, @@ -2309,7 +2309,7 @@ static const struct usb_action hv7131bxx_Initial[] = { /* 320x240 */ {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05}, {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE}, {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS}, - {0xaa, 0x02, 0x0090}, /* {0xaa, 0x02, 0x0080}; */ + {0xaa, 0x02, 0x0090}, /* 00,02,80,aa */ {0xa1, 0x01, 0x0002}, {0xa0, 0x00, ZC3XX_R092_I2CADDRESSSELECT}, {0xa0, 0x02, ZC3XX_R090_I2CCOMMAND}, @@ -6388,6 +6388,8 @@ static void setbrightness(struct gspca_dev *gspca_dev) /*fixme: is it really write to 011d and 018d for all other sensors? */ brightness = sd->brightness; reg_w(gspca_dev->dev, brightness, 0x011d); + if (sd->sensor == SENSOR_HV7131B) + return; if (brightness < 0x70) brightness += 0x10; else @@ -6529,6 +6531,7 @@ static void setquality(struct gspca_dev *gspca_dev) switch (sd->sensor) { case SENSOR_GC0305: + case SENSOR_HV7131B: case SENSOR_OV7620: case SENSOR_PO2030: return; @@ -7209,7 +7212,6 @@ static int sd_start(struct gspca_dev *gspca_dev) mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; zc3_init = init_tb[(int) sd->sensor][mode]; switch (sd->sensor) { - case SENSOR_HV7131B: case SENSOR_HV7131C: zcxx_probeSensor(gspca_dev); break; -- cgit v1.2.3-70-g09d2 From 1d6782bda5c1fb2bca44af50647b45427d8ef4ec Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Wed, 5 Nov 2008 00:49:14 -0300 Subject: V4L/DVB (9516): cx18: Move DVB buffer transfer handling from irq handler to work_queue cx18: Move DVB buffer transfer handling from irq handler to work_queue thread. In order to properly lock the epu2cpu mailbox for driver to CX23418 commands, the DVB/TS buffer handling needs to be moved from the IRQ handler and IRQ context to a work queue. This work_queue implmentation is strikingly similar to the ivtv implementation - for better or worse. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-driver.c | 12 ++++++++++++ drivers/media/video/cx18/cx18-driver.h | 18 ++++++++++++------ drivers/media/video/cx18/cx18-dvb.c | 23 +++++++++++++++++++++++ drivers/media/video/cx18/cx18-dvb.h | 1 + drivers/media/video/cx18/cx18-irq.c | 29 ++++++++++++++++++++--------- drivers/media/video/cx18/cx18-irq.h | 4 +--- drivers/media/video/cx18/cx18-queue.c | 14 ++++++-------- 7 files changed, 75 insertions(+), 26 deletions(-) diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 2befa3819cd..7874d9790a5 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -449,6 +449,14 @@ static int __devinit cx18_init_struct1(struct cx18 *cx) spin_lock_init(&cx->lock); + cx->work_queue = create_singlethread_workqueue(cx->name); + if (cx->work_queue == NULL) { + CX18_ERR("Could not create work queue\n"); + return -1; + } + + INIT_WORK(&cx->work, cx18_work_handler); + /* start counting open_id at 1 */ cx->open_id = 1; @@ -831,6 +839,7 @@ free_map: free_mem: release_mem_region(cx->base_addr, CX18_MEM_SIZE); free_workqueue: + destroy_workqueue(cx->work_queue); err: if (retval == 0) retval = -ENODEV; @@ -931,6 +940,9 @@ static void cx18_remove(struct pci_dev *pci_dev) cx18_halt_firmware(cx); + flush_workqueue(cx->work_queue); + destroy_workqueue(cx->work_queue); + cx18_streams_cleanup(cx, 1); exit_cx18_i2c(cx); diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index e721c01d217..bbdd5f25041 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -199,12 +199,15 @@ struct cx18_options { #define CX18_F_S_APPL_IO 8 /* this stream is used read/written by an application */ /* per-cx18, i_flags */ -#define CX18_F_I_LOADED_FW 0 /* Loaded the firmware the first time */ -#define CX18_F_I_EOS 4 /* End of encoder stream reached */ -#define CX18_F_I_RADIO_USER 5 /* The radio tuner is selected */ -#define CX18_F_I_ENC_PAUSED 13 /* the encoder is paused */ -#define CX18_F_I_INITED 21 /* set after first open */ -#define CX18_F_I_FAILED 22 /* set if first open failed */ +#define CX18_F_I_LOADED_FW 0 /* Loaded firmware 1st time */ +#define CX18_F_I_EOS 4 /* End of encoder stream */ +#define CX18_F_I_RADIO_USER 5 /* radio tuner is selected */ +#define CX18_F_I_ENC_PAUSED 13 /* the encoder is paused */ +#define CX18_F_I_HAVE_WORK 15 /* there is work to be done */ +#define CX18_F_I_WORK_HANDLER_DVB 18 /* work to be done for DVB */ +#define CX18_F_I_INITED 21 /* set after first open */ +#define CX18_F_I_FAILED 22 /* set if first open failed */ +#define CX18_F_I_WORK_INITED 23 /* worker thread initialized */ /* These are the VBI types as they appear in the embedded VBI private packets. */ #define CX18_SLICED_TYPE_TELETEXT_B (1) @@ -431,6 +434,9 @@ struct cx18 { /* when the current DMA is finished this queue is woken up */ wait_queue_head_t dma_waitq; + struct workqueue_struct *work_queue; + struct work_struct work; + /* i2c */ struct i2c_adapter i2c_adap[2]; struct i2c_algo_bit_data i2c_algo[2]; diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c index afc694e7bdb..4542e2e5e3d 100644 --- a/drivers/media/video/cx18/cx18-dvb.c +++ b/drivers/media/video/cx18/cx18-dvb.c @@ -23,6 +23,8 @@ #include "cx18-dvb.h" #include "cx18-io.h" #include "cx18-streams.h" +#include "cx18-queue.h" +#include "cx18-scb.h" #include "cx18-cards.h" #include "s5h1409.h" #include "mxl5005s.h" @@ -300,3 +302,24 @@ static int dvb_register(struct cx18_stream *stream) return ret; } + +void cx18_dvb_work_handler(struct cx18 *cx) +{ + struct cx18_buffer *buf; + struct cx18_stream *s = &cx->streams[CX18_ENC_STREAM_TYPE_TS]; + + while ((buf = cx18_dequeue(s, &s->q_full)) != NULL) { + if (s->dvb.enabled) + dvb_dmx_swfilter(&s->dvb.demux, buf->buf, + buf->bytesused); + + cx18_enqueue(s, buf, &s->q_free); + cx18_buf_sync_for_device(s, buf); + if (s->handle == CX18_INVALID_TASK_HANDLE) /* FIXME: improve */ + continue; + + cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, + (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, + 1, buf->id, s->buf_size); + } +} diff --git a/drivers/media/video/cx18/cx18-dvb.h b/drivers/media/video/cx18/cx18-dvb.h index bf8d8f6f545..bbdcefc87f2 100644 --- a/drivers/media/video/cx18/cx18-dvb.h +++ b/drivers/media/video/cx18/cx18-dvb.h @@ -23,3 +23,4 @@ int cx18_dvb_register(struct cx18_stream *stream); void cx18_dvb_unregister(struct cx18_stream *stream); +void cx18_dvb_work_handler(struct cx18 *cx); diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index c306e142c1c..5fbfbd0f149 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -29,6 +29,20 @@ #include "cx18-mailbox.h" #include "cx18-vbi.h" #include "cx18-scb.h" +#include "cx18-dvb.h" + +void cx18_work_handler(struct work_struct *work) +{ + struct cx18 *cx = container_of(work, struct cx18, work); + if (test_and_clear_bit(CX18_F_I_WORK_INITED, &cx->i_flags)) { + struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 }; + /* This thread must use the FIFO scheduler as it + * is realtime sensitive. */ + sched_setscheduler(current, SCHED_FIFO, ¶m); + } + if (test_and_clear_bit(CX18_F_I_WORK_HANDLER_DVB, &cx->i_flags)) + cx18_dvb_work_handler(cx); +} static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) { @@ -65,17 +79,11 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) if (buf) { cx18_buf_sync_for_cpu(s, buf); if (s->type == CX18_ENC_STREAM_TYPE_TS && s->dvb.enabled) { - /* process the buffer here */ - CX18_DEBUG_HI_DMA("TS recv and sent bytesused=%d\n", + CX18_DEBUG_HI_DMA("TS recv bytesused = %d\n", buf->bytesused); - dvb_dmx_swfilter(&s->dvb.demux, buf->buf, - buf->bytesused); - - cx18_buf_sync_for_device(s, buf); - cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, - (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, - 1, buf->id, s->buf_size); + set_bit(CX18_F_I_WORK_HANDLER_DVB, &cx->i_flags); + set_bit(CX18_F_I_HAVE_WORK, &cx->i_flags); } else set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags); } else { @@ -185,5 +193,8 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) if (sw1) epu_cmd(cx, sw1); + if (test_and_clear_bit(CX18_F_I_HAVE_WORK, &cx->i_flags)) + queue_work(cx->work_queue, &cx->work); + return (sw1 || sw2 || hw2) ? IRQ_HANDLED : IRQ_NONE; } diff --git a/drivers/media/video/cx18/cx18-irq.h b/drivers/media/video/cx18/cx18-irq.h index 379f704f5cb..6173ca3bc9e 100644 --- a/drivers/media/video/cx18/cx18-irq.h +++ b/drivers/media/video/cx18/cx18-irq.h @@ -32,6 +32,4 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id); -void cx18_irq_work_handler(struct work_struct *work); -void cx18_dma_stream_dec_prepare(struct cx18_stream *s, u32 offset, int lock); -void cx18_unfinished_dma(unsigned long arg); +void cx18_work_handler(struct work_struct *work); diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c index a33ba04a268..174682c2582 100644 --- a/drivers/media/video/cx18/cx18-queue.c +++ b/drivers/media/video/cx18/cx18-queue.c @@ -88,15 +88,13 @@ struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id, if (buf->id != id) continue; + buf->bytesused = bytesused; - /* the transport buffers are handled differently, - they are not moved to the full queue */ - if (s->type != CX18_ENC_STREAM_TYPE_TS) { - atomic_dec(&s->q_free.buffers); - atomic_inc(&s->q_full.buffers); - s->q_full.bytesused += buf->bytesused; - list_move_tail(&buf->list, &s->q_full.list); - } + atomic_dec(&s->q_free.buffers); + atomic_inc(&s->q_full.buffers); + s->q_full.bytesused += buf->bytesused; + list_move_tail(&buf->list, &s->q_full.list); + spin_unlock(&s->qlock); return buf; } -- cgit v1.2.3-70-g09d2 From 2002c69595a092518107f7e3c1294c9710bc92ae Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 11 Nov 2008 11:52:33 +0100 Subject: sched: release buddies on yield Clear buddies on yield, so that the buddy rules don't schedule them despite them being placed right-most. This fixed a performance regression with yield-happy binary JVMs. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar Tested-by: Lin Ming --- kernel/sched_fair.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 51aa3e102ac..98345e45b05 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -716,6 +716,15 @@ enqueue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int wakeup) __enqueue_entity(cfs_rq, se); } +static void clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se) +{ + if (cfs_rq->last == se) + cfs_rq->last = NULL; + + if (cfs_rq->next == se) + cfs_rq->next = NULL; +} + static void dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep) { @@ -738,11 +747,7 @@ dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep) #endif } - if (cfs_rq->last == se) - cfs_rq->last = NULL; - - if (cfs_rq->next == se) - cfs_rq->next = NULL; + clear_buddies(cfs_rq, se); if (se != cfs_rq->curr) __dequeue_entity(cfs_rq, se); @@ -977,6 +982,8 @@ static void yield_task_fair(struct rq *rq) if (unlikely(cfs_rq->nr_running == 1)) return; + clear_buddies(cfs_rq, se); + if (likely(!sysctl_sched_compat_yield) && curr->policy != SCHED_BATCH) { update_rq_clock(rq); /* -- cgit v1.2.3-70-g09d2 From 355a0ec471377a8a907b79c8fba3f0f09b44656e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 11 Nov 2008 16:46:19 +0100 Subject: ALSA: hda - Add missing analog-mux mixer creation for STAC9200 The creation of analog-mux mixer element is missing in patch_stac9200() due to the dynamic allocation patch. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index e6085915d86..1627756e5c7 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3530,6 +3530,12 @@ static int stac9200_parse_auto_config(struct hda_codec *codec) if ((err = stac9200_auto_create_lfe_ctls(codec, &spec->autocfg)) < 0) return err; + if (spec->num_muxes > 0) { + err = stac92xx_auto_create_mux_input_ctls(codec); + if (err < 0) + return err; + } + if (spec->autocfg.dig_out_pin) spec->multiout.dig_out_nid = 0x05; if (spec->autocfg.dig_in_pin) -- cgit v1.2.3-70-g09d2 From 4f1e6bc3646ab50b8181555ab7e6eeab68b8632a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 11 Nov 2008 16:47:24 +0100 Subject: ALSA: hda - Fix input pin initialization for STAC/IDT codecs The input pins are sometimes not initialized properly because of the optimization check of the current pinctl code. Force to initialize the mic input pins so that they can be set up properly even if they were in a weird state. But keep other input pins if already set up as input, since this could be an extra mic pin. Reference: Novell bnc#443738 https://bugzilla.novell.com/show_bug.cgi?id=443738 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 1627756e5c7..a51160106df 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -3653,14 +3653,18 @@ static int stac92xx_init(struct hda_codec *codec) for (i = 0; i < AUTO_PIN_LAST; i++) { hda_nid_t nid = cfg->input_pins[i]; if (nid) { - unsigned int pinctl = snd_hda_codec_read(codec, nid, - 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0); - /* if PINCTL already set then skip */ - if (pinctl & AC_PINCAP_IN) - continue; - pinctl = AC_PINCTL_IN_EN; - if (i == AUTO_PIN_MIC || i == AUTO_PIN_FRONT_MIC) - pinctl |= stac92xx_get_vref(codec, nid); + unsigned int pinctl; + if (i == AUTO_PIN_MIC || i == AUTO_PIN_FRONT_MIC) { + /* for mic pins, force to initialize */ + pinctl = stac92xx_get_vref(codec, nid); + } else { + pinctl = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_PIN_WIDGET_CONTROL, 0); + /* if PINCTL already set then skip */ + if (pinctl & AC_PINCTL_IN_EN) + continue; + } + pinctl |= AC_PINCTL_IN_EN; stac92xx_auto_set_pinctl(codec, nid, pinctl); } } -- cgit v1.2.3-70-g09d2 From 8eb04cf3402c59e84af9d2e86149edb4044f9a9e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 11 Nov 2008 14:48:44 +0000 Subject: tty: trivial - fix up email addresses in tty related stuff Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/isicom.c | 6 ++++-- drivers/char/mxser.c | 3 ++- drivers/usb/serial/ir-usb.c | 2 +- 3 files changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 7d30ee1d3fc..04e4549299b 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -7,12 +7,14 @@ * Original driver code supplied by Multi-Tech * * Changes - * 1/9/98 alan@redhat.com Merge to 2.0.x kernel tree + * 1/9/98 alan@lxorguk.ukuu.org.uk + * Merge to 2.0.x kernel tree * Obtain and use official major/minors * Loader switched to a misc device * (fixed range check bug as a side effect) * Printk clean up - * 9/12/98 alan@redhat.com Rough port to 2.1.x + * 9/12/98 alan@lxorguk.ukuu.org.uk + * Rough port to 2.1.x * * 10/6/99 sameer Merged the ISA and PCI drivers to * a new unified driver. diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 8beef50f95a..04776691541 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -14,7 +14,8 @@ * (at your option) any later version. * * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox - * . The original 1.8 code is available on www.moxa.com. + * . The original 1.8 code is available on + * www.moxa.com. * - Fixed x86_64 cleanness */ diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index b679a556b98..4e2cda93da5 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -26,7 +26,7 @@ * Introduced common header to be used also in USB Gadget Framework. * Still needs some other style fixes. * - * 2007_Jun_21 Alan Cox + * 2007_Jun_21 Alan Cox * Minimal cleanups for some of the driver problens and tty layer abuse. * Still needs fixing to allow multiple dongles. * -- cgit v1.2.3-70-g09d2 From 0906dd9df2f79042cfa82d8388895be7cbe7a51b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 11 Nov 2008 14:51:23 +0000 Subject: telephony: trivial: fix up email address Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/telephony/phonedev.c | 2 +- include/linux/telephony.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/telephony/phonedev.c b/drivers/telephony/phonedev.c index 37caf4d6903..b52cc830c0b 100644 --- a/drivers/telephony/phonedev.c +++ b/drivers/telephony/phonedev.c @@ -8,7 +8,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * Author: Alan Cox, + * Author: Alan Cox, * * Fixes: Mar 01 2000 Thomas Sparr, * phone_register_device now works with unit!=PHONE_UNIT_ANY diff --git a/include/linux/telephony.h b/include/linux/telephony.h index 5b2b6261f19..f63afe330ad 100644 --- a/include/linux/telephony.h +++ b/include/linux/telephony.h @@ -14,7 +14,7 @@ * Authors: Ed Okerson, * Greg Herlein, * - * Contributors: Alan Cox, + * Contributors: Alan Cox, * David W. Erhart, * * IN NO EVENT SHALL QUICKNET TECHNOLOGIES, INC. BE LIABLE TO ANY PARTY FOR -- cgit v1.2.3-70-g09d2 From c41ef344de212bd918f7765af21b5008628c03e0 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Tue, 28 Oct 2008 18:16:58 -0200 Subject: KVM: MMU: increase per-vcpu rmap cache alloc size The page fault path can use two rmap_desc structures, if: - walk_addr's dirty pte update allocates one rmap_desc. - mmu_lock is dropped, sptes are zapped resulting in rmap_desc being freed. - fetch->mmu_set_spte allocates another rmap_desc. Increase to 4 for safety. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- arch/x86/kvm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 2a5e64881d9..f1983d9477c 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -314,7 +314,7 @@ static int mmu_topup_memory_caches(struct kvm_vcpu *vcpu) if (r) goto out; r = mmu_topup_memory_cache(&vcpu->arch.mmu_rmap_desc_cache, - rmap_desc_cache, 1); + rmap_desc_cache, 4); if (r) goto out; r = mmu_topup_memory_cache_page(&vcpu->arch.mmu_page_cache, 8); -- cgit v1.2.3-70-g09d2 From a2e4e28946c2c282a040ba4945c8f7288de69118 Mon Sep 17 00:00:00 2001 From: Xiantao Zhang Date: Thu, 23 Oct 2008 15:02:52 +0800 Subject: KVM: ia64: Use guest signal mask when blocking Before a vcpu blocks, it should switch to the guest signal mask to allow signals to unblock it. Signed-off-by: Xiantao Zhang Signed-off-by: Avi Kivity --- arch/ia64/kvm/kvm-ia64.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 3caac477de9..af1464f7a6a 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -673,16 +673,16 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) vcpu_load(vcpu); + if (vcpu->sigset_active) + sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved); + if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED)) { kvm_vcpu_block(vcpu); clear_bit(KVM_REQ_UNHALT, &vcpu->requests); - vcpu_put(vcpu); - return -EAGAIN; + r = -EAGAIN; + goto out; } - if (vcpu->sigset_active) - sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved); - if (vcpu->mmio_needed) { memcpy(vcpu->mmio_data, kvm_run->mmio.data, 8); kvm_set_mmio_data(vcpu); @@ -690,7 +690,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) vcpu->mmio_needed = 0; } r = __vcpu_run(vcpu, kvm_run); - +out: if (vcpu->sigset_active) sigprocmask(SIG_SETMASK, &sigsaved, NULL); -- cgit v1.2.3-70-g09d2 From a29a2af378f3f6362b68e126e2541c8bde885ead Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Wed, 29 Oct 2008 14:13:39 -0700 Subject: x86: KVM guest: fix section mismatch warning in kvmclock.c WARNING: arch/x86/kernel/built-in.o(.text+0x1722c): Section mismatch in reference from the function kvm_setup_secondary_clock() to the function .devinit.text:setup_secondary_APIC_clock() The function kvm_setup_secondary_clock() references the function __devinit setup_secondary_APIC_clock(). This is often because kvm_setup_secondary_clock lacks a __devinit annotation or the annotation of setup_secondary_APIC_clock is wrong. Signed-off-by: Md.Rakib H. Mullick Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Avi Kivity --- arch/x86/kernel/kvmclock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 774ac499156..1c9cc431ea4 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -128,7 +128,7 @@ static int kvm_register_clock(char *txt) } #ifdef CONFIG_X86_LOCAL_APIC -static void kvm_setup_secondary_clock(void) +static void __devinit kvm_setup_secondary_clock(void) { /* * Now that the first cpu already had this clocksource initialized, -- cgit v1.2.3-70-g09d2 From ca93e992fdfdc6569ac2845d7560eeb5de4a4e0b Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 4 Nov 2008 11:25:17 +0200 Subject: KVM: Require the PCI subsystem PCI device assignment makes calls to pci code, so require it to be built into the kernel. Signed-off-by: Avi Kivity --- arch/ia64/kvm/Kconfig | 2 ++ arch/x86/kvm/Kconfig | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig index 8e99fed6b3f..f833a0b4188 100644 --- a/arch/ia64/kvm/Kconfig +++ b/arch/ia64/kvm/Kconfig @@ -20,6 +20,8 @@ if VIRTUALIZATION config KVM tristate "Kernel-based Virtual Machine (KVM) support" depends on HAVE_KVM && EXPERIMENTAL + # for device assignment: + depends on PCI select PREEMPT_NOTIFIERS select ANON_INODES ---help--- diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig index ce3251ce550..b81125f0bde 100644 --- a/arch/x86/kvm/Kconfig +++ b/arch/x86/kvm/Kconfig @@ -20,6 +20,8 @@ if VIRTUALIZATION config KVM tristate "Kernel-based Virtual Machine (KVM) support" depends on HAVE_KVM + # for device assignment: + depends on PCI select PREEMPT_NOTIFIERS select MMU_NOTIFIER select ANON_INODES -- cgit v1.2.3-70-g09d2 From 928d4bf747e9c290b690ff515d8f81e8ee226d97 Mon Sep 17 00:00:00 2001 From: Sheng Yang Date: Thu, 6 Nov 2008 14:55:45 +0800 Subject: KVM: VMX: Set IGMT bit in EPT entry There is a potential issue that, when guest using pagetable without vmexit when EPT enabled, guest would use PAT/PCD/PWT bits to index PAT msr for it's memory, which would be inconsistent with host side and would cause host MCE due to inconsistent cache attribute. The patch set IGMT bit in EPT entry to ignore guest PAT and use WB as default memory type to protect host (notice that all memory mapped by KVM should be WB). Signed-off-by: Sheng Yang Signed-off-by: Avi Kivity --- arch/x86/kvm/vmx.c | 3 ++- arch/x86/kvm/vmx.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 2643b430d83..d06b4dc0e2e 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -3564,7 +3564,8 @@ static int __init vmx_init(void) bypass_guest_pf = 0; kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK | VMX_EPT_WRITABLE_MASK | - VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT); + VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT | + VMX_EPT_IGMT_BIT); kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull, VMX_EPT_EXECUTABLE_MASK); kvm_enable_tdp(); diff --git a/arch/x86/kvm/vmx.h b/arch/x86/kvm/vmx.h index 3e010d21fdd..ec5edc339da 100644 --- a/arch/x86/kvm/vmx.h +++ b/arch/x86/kvm/vmx.h @@ -352,6 +352,7 @@ enum vmcs_field { #define VMX_EPT_READABLE_MASK 0x1ull #define VMX_EPT_WRITABLE_MASK 0x2ull #define VMX_EPT_EXECUTABLE_MASK 0x4ull +#define VMX_EPT_IGMT_BIT (1ull << 6) #define VMX_EPT_IDENTITY_PAGETABLE_ADDR 0xfffbc000ul -- cgit v1.2.3-70-g09d2 From c60ff51eb26dfcfb0bdc807b09a096aeadd01325 Mon Sep 17 00:00:00 2001 From: Xiantao Zhang Date: Sat, 8 Nov 2008 15:46:59 +0800 Subject: KVM: ia64: fix vmm_spin_{un}lock for !CONFIG_SMP In the case of !CONFIG_SMP, raw_spinlock_t is empty and the spinlock functions don't build. Fix by defining spinlock functions for the uniprocessor case. Signed-off-by: Xiantao Zhang Signed-off-by: Avi Kivity --- arch/ia64/kvm/vcpu.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/ia64/kvm/vcpu.h b/arch/ia64/kvm/vcpu.h index 341e3fee280..e9b2a4e121c 100644 --- a/arch/ia64/kvm/vcpu.h +++ b/arch/ia64/kvm/vcpu.h @@ -384,6 +384,10 @@ static inline u64 __gpfn_is_io(u64 gpfn) #define MODE_IND(psr) \ (((psr).it << 2) + ((psr).dt << 1) + (psr).rt) +#ifndef CONFIG_SMP +#define _vmm_raw_spin_lock(x) do {}while(0) +#define _vmm_raw_spin_unlock(x) do {}while(0) +#else #define _vmm_raw_spin_lock(x) \ do { \ __u32 *ia64_spinlock_ptr = (__u32 *) (x); \ @@ -403,6 +407,7 @@ static inline u64 __gpfn_is_io(u64 gpfn) do { barrier(); \ ((spinlock_t *)x)->raw_lock.lock = 0; } \ while (0) +#endif void vmm_spin_lock(spinlock_t *lock); void vmm_spin_unlock(spinlock_t *lock); -- cgit v1.2.3-70-g09d2 From e17d1dc0863767bab8fde4ba9be92c7f79e7fe50 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 11 Nov 2008 13:09:36 +0200 Subject: KVM: Fix pit memory leak if unable to allocate irq source id MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reported-By: Daniel Marjamäki Signed-off-by: Avi Kivity --- arch/x86/kvm/i8254.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c index 8772dc94682..59ebd37ad79 100644 --- a/arch/x86/kvm/i8254.c +++ b/arch/x86/kvm/i8254.c @@ -548,8 +548,10 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm) mutex_lock(&kvm->lock); pit->irq_source_id = kvm_request_irq_source_id(kvm); mutex_unlock(&kvm->lock); - if (pit->irq_source_id < 0) + if (pit->irq_source_id < 0) { + kfree(pit); return NULL; + } mutex_init(&pit->pit_state.lock); mutex_lock(&pit->pit_state.lock); -- cgit v1.2.3-70-g09d2 From a358324466b171e145df20bdb74fe81759906de6 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 11 Nov 2008 15:01:42 -0500 Subject: ring-buffer: buffer record on/off switch Impact: enable/disable ring buffer recording API added Several kernel developers have requested that there be a way to stop recording into the ring buffers with a simple switch that can also be enabled from userspace. This patch addes a new kernel API to the ring buffers called: tracing_on() tracing_off() When tracing_off() is called, all ring buffers will not be able to record into their buffers. tracing_on() will enable the ring buffers again. These two act like an on/off switch. That is, there is no counting of the number of times tracing_off or tracing_on has been called. A new file is added to the debugfs/tracing directory called tracing_on This allows for userspace applications to also flip the switch. echo 0 > debugfs/tracing/tracing_on disables the tracing. echo 1 > /debugfs/tracing/tracing_on enables it. Note, this does not disable or enable any tracers. It only sets or clears a flag that needs to be set in order for the ring buffers to write to their buffers. It is a global flag, and affects all ring buffers. The buffers start out with tracing_on enabled. There are now three flags that control recording into the buffers: tracing_on: which affects all ring buffer tracers. buffer->record_disabled: which affects an allocated buffer, which may be set if an anomaly is detected, and tracing is disabled. cpu_buffer->record_disabled: which is set by tracing_stop() or if an anomaly is detected. tracing_start can not reenable this if an anomaly occurred. The userspace debugfs/tracing/tracing_enabled is implemented with tracing_stop() but the user space code can not enable it if the kernel called tracing_stop(). Userspace can enable the tracing_on even if the kernel disabled it. It is just a switch used to stop tracing if a condition was hit. tracing_on is not for protecting critical areas in the kernel nor is it for stopping tracing if an anomaly occurred. This is because userspace can reenable it at any time. Side effect: With this patch, I discovered a dead variable in ftrace.c called tracing_on. This patch removes it. Signed-off-by: Steven Rostedt --- include/linux/ring_buffer.h | 3 ++ kernel/trace/ftrace.c | 8 +--- kernel/trace/ring_buffer.c | 101 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 106 insertions(+), 6 deletions(-) diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h index 536b0ca46a0..e097c2e6b6d 100644 --- a/include/linux/ring_buffer.h +++ b/include/linux/ring_buffer.h @@ -120,6 +120,9 @@ unsigned long ring_buffer_overruns(struct ring_buffer *buffer); u64 ring_buffer_time_stamp(int cpu); void ring_buffer_normalize_time_stamp(int cpu, u64 *ts); +void tracing_on(void); +void tracing_off(void); + enum ring_buffer_flags { RB_FL_OVERWRITE = 1 << 0, }; diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 4a39d24568c..14fa52297b2 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -185,7 +185,6 @@ enum { }; static int ftrace_filtered; -static int tracing_on; static LIST_HEAD(ftrace_new_addrs); @@ -506,13 +505,10 @@ static int __ftrace_modify_code(void *data) { int *command = data; - if (*command & FTRACE_ENABLE_CALLS) { + if (*command & FTRACE_ENABLE_CALLS) ftrace_replace_code(1); - tracing_on = 1; - } else if (*command & FTRACE_DISABLE_CALLS) { + else if (*command & FTRACE_DISABLE_CALLS) ftrace_replace_code(0); - tracing_on = 0; - } if (*command & FTRACE_UPDATE_TRACE_FUNC) ftrace_update_ftrace_func(ftrace_trace_function); diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 2f76193c348..b08ee9f00c8 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -16,6 +16,35 @@ #include #include +#include "trace.h" + +/* Global flag to disable all recording to ring buffers */ +static int ring_buffers_off __read_mostly; + +/** + * tracing_on - enable all tracing buffers + * + * This function enables all tracing buffers that may have been + * disabled with tracing_off. + */ +void tracing_on(void) +{ + ring_buffers_off = 0; +} + +/** + * tracing_off - turn off all tracing buffers + * + * This function stops all tracing buffers from recording data. + * It does not disable any overhead the tracers themselves may + * be causing. This function simply causes all recording to + * the ring buffers to fail. + */ +void tracing_off(void) +{ + ring_buffers_off = 1; +} + /* Up this if you want to test the TIME_EXTENTS and normalization */ #define DEBUG_SHIFT 0 @@ -1133,6 +1162,9 @@ ring_buffer_lock_reserve(struct ring_buffer *buffer, struct ring_buffer_event *event; int cpu, resched; + if (ring_buffers_off) + return NULL; + if (atomic_read(&buffer->record_disabled)) return NULL; @@ -1249,6 +1281,9 @@ int ring_buffer_write(struct ring_buffer *buffer, int ret = -EBUSY; int cpu, resched; + if (ring_buffers_off) + return -EBUSY; + if (atomic_read(&buffer->record_disabled)) return -EBUSY; @@ -2070,3 +2105,69 @@ int ring_buffer_swap_cpu(struct ring_buffer *buffer_a, return 0; } +static ssize_t +rb_simple_read(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + int *p = filp->private_data; + char buf[64]; + int r; + + /* !ring_buffers_off == tracing_on */ + r = sprintf(buf, "%d\n", !*p); + + return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); +} + +static ssize_t +rb_simple_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + int *p = filp->private_data; + char buf[64]; + long val; + int ret; + + if (cnt >= sizeof(buf)) + return -EINVAL; + + if (copy_from_user(&buf, ubuf, cnt)) + return -EFAULT; + + buf[cnt] = 0; + + ret = strict_strtoul(buf, 10, &val); + if (ret < 0) + return ret; + + /* !ring_buffers_off == tracing_on */ + *p = !val; + + (*ppos)++; + + return cnt; +} + +static struct file_operations rb_simple_fops = { + .open = tracing_open_generic, + .read = rb_simple_read, + .write = rb_simple_write, +}; + + +static __init int rb_init_debugfs(void) +{ + struct dentry *d_tracer; + struct dentry *entry; + + d_tracer = tracing_init_dentry(); + + entry = debugfs_create_file("tracing_on", 0644, d_tracer, + &ring_buffers_off, &rb_simple_fops); + if (!entry) + pr_warning("Could not create debugfs 'tracing_on' entry\n"); + + return 0; +} + +fs_initcall(rb_init_debugfs); -- cgit v1.2.3-70-g09d2 From 137cb55c6dcd56cb367285adaf15f808a2a9fec7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 11 Nov 2008 13:12:33 -0700 Subject: iop-adma: add a dummy read to flush next descriptor update The current dummy read references the wrong address allowing the next descriptor address update to linger in the store buffer and get passed by an 'append' event. This issue was uncovered by the change from strongly-ordered to device memory for the adma registers. Signed-off-by: Dan Williams --- drivers/dma/iop-adma.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index 71fba82462c..95f5a946681 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -411,6 +411,7 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx) int slot_cnt; int slots_per_op; dma_cookie_t cookie; + dma_addr_t next_dma; grp_start = sw_desc->group_head; slot_cnt = grp_start->slot_cnt; @@ -425,11 +426,11 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx) &old_chain_tail->chain_node); /* fix up the hardware chain */ - iop_desc_set_next_desc(old_chain_tail, grp_start->async_tx.phys); + next_dma = grp_start->async_tx.phys; + iop_desc_set_next_desc(old_chain_tail, next_dma); + BUG_ON(iop_desc_get_next_desc(old_chain_tail) != next_dma); /* flush */ - /* 1/ don't add pre-chained descriptors - * 2/ dummy read to flush next_desc write - */ + /* check for pre-chained descriptors */ BUG_ON(iop_desc_get_next_desc(sw_desc)); /* increment the pending count by the number of slots -- cgit v1.2.3-70-g09d2 From 65e503814dec83c7b2ac955e75919d009109c919 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 11 Nov 2008 13:12:33 -0700 Subject: iop-adma: use iop_paranoia() for debug BUG_ONs Now that the critical read back to flush the next descriptor address is fixed we can downgrade some BUG_ONs that need only be enabled when testing changes to the driver. Signed-off-by: Dan Williams --- arch/arm/include/asm/hardware/iop3xx-adma.h | 5 +++-- arch/arm/include/asm/hardware/iop_adma.h | 6 ++++++ arch/arm/mach-iop13xx/include/mach/adma.h | 3 ++- drivers/dma/iop-adma.c | 2 +- 4 files changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h index 87bff09633a..83e6ba338e2 100644 --- a/arch/arm/include/asm/hardware/iop3xx-adma.h +++ b/arch/arm/include/asm/hardware/iop3xx-adma.h @@ -730,7 +730,8 @@ static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc, { /* hw_desc->next_desc is the same location for all channels */ union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, }; - BUG_ON(hw_desc.dma->next_desc); + + iop_paranoia(hw_desc.dma->next_desc); hw_desc.dma->next_desc = next_desc_addr; } @@ -760,7 +761,7 @@ static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc) struct iop3xx_desc_aau *hw_desc = desc->hw_desc; struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field; - BUG_ON(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en)); + iop_paranoia(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en)); return desc_ctrl.zero_result_err; } diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h index cb7e3611bcb..385c6e8cbbd 100644 --- a/arch/arm/include/asm/hardware/iop_adma.h +++ b/arch/arm/include/asm/hardware/iop_adma.h @@ -23,6 +23,12 @@ #define IOP_ADMA_SLOT_SIZE 32 #define IOP_ADMA_THRESHOLD 4 +#ifdef DEBUG +#define IOP_PARANOIA 1 +#else +#define IOP_PARANOIA 0 +#endif +#define iop_paranoia(x) BUG_ON(IOP_PARANOIA && (x)) /** * struct iop_adma_device - internal representation of an ADMA device diff --git a/arch/arm/mach-iop13xx/include/mach/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h index 60019c8e646..5722e86f217 100644 --- a/arch/arm/mach-iop13xx/include/mach/adma.h +++ b/arch/arm/mach-iop13xx/include/mach/adma.h @@ -404,7 +404,8 @@ static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc, u32 next_desc_addr) { struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc; - BUG_ON(hw_desc->next_desc); + + iop_paranoia(hw_desc->next_desc); hw_desc->next_desc = next_desc_addr; } diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index 95f5a946681..c7a9306d951 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -431,7 +431,7 @@ iop_adma_tx_submit(struct dma_async_tx_descriptor *tx) BUG_ON(iop_desc_get_next_desc(old_chain_tail) != next_dma); /* flush */ /* check for pre-chained descriptors */ - BUG_ON(iop_desc_get_next_desc(sw_desc)); + iop_paranoia(iop_desc_get_next_desc(sw_desc)); /* increment the pending count by the number of slots * memcpy operations have a 1:1 (slot:operation) relation -- cgit v1.2.3-70-g09d2 From 06190d8415219d9eef7d8f04b52a109e34575a76 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 11 Nov 2008 13:12:33 -0700 Subject: dmaengine: struct device - replace bus_id with dev_name(), dev_set_name() Acked-by: Greg Kroah-Hartman Acked-by: Maciej Sosnowski Signed-off-by: Kay Sievers Signed-off-by: Dan Williams --- drivers/dma/dmaengine.c | 4 ++-- drivers/dma/dmatest.c | 22 +++++++++++----------- 2 files changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index dc003a3a787..5317e08221e 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -399,8 +399,8 @@ int dma_async_device_register(struct dma_device *device) chan->chan_id = chancnt++; chan->dev.class = &dma_devclass; chan->dev.parent = device->dev; - snprintf(chan->dev.bus_id, BUS_ID_SIZE, "dma%dchan%d", - device->dev_id, chan->chan_id); + dev_set_name(&chan->dev, "dma%dchan%d", + device->dev_id, chan->chan_id); rc = device_register(&chan->dev); if (rc) { diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index d1e381e35a9..ed9636bfb54 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -20,11 +20,11 @@ static unsigned int test_buf_size = 16384; module_param(test_buf_size, uint, S_IRUGO); MODULE_PARM_DESC(test_buf_size, "Size of the memcpy test buffer"); -static char test_channel[BUS_ID_SIZE]; +static char test_channel[20]; module_param_string(channel, test_channel, sizeof(test_channel), S_IRUGO); MODULE_PARM_DESC(channel, "Bus ID of the channel to test (default: any)"); -static char test_device[BUS_ID_SIZE]; +static char test_device[20]; module_param_string(device, test_device, sizeof(test_device), S_IRUGO); MODULE_PARM_DESC(device, "Bus ID of the DMA Engine to test (default: any)"); @@ -80,14 +80,14 @@ static bool dmatest_match_channel(struct dma_chan *chan) { if (test_channel[0] == '\0') return true; - return strcmp(chan->dev.bus_id, test_channel) == 0; + return strcmp(dev_name(&chan->dev), test_channel) == 0; } static bool dmatest_match_device(struct dma_device *device) { if (test_device[0] == '\0') return true; - return strcmp(device->dev->bus_id, test_device) == 0; + return strcmp(dev_name(device->dev), test_device) == 0; } static unsigned long dmatest_random(void) @@ -332,7 +332,7 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) dtc = kmalloc(sizeof(struct dmatest_chan), GFP_KERNEL); if (!dtc) { - pr_warning("dmatest: No memory for %s\n", chan->dev.bus_id); + pr_warning("dmatest: No memory for %s\n", dev_name(&chan->dev)); return DMA_NAK; } @@ -343,16 +343,16 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) thread = kzalloc(sizeof(struct dmatest_thread), GFP_KERNEL); if (!thread) { pr_warning("dmatest: No memory for %s-test%u\n", - chan->dev.bus_id, i); + dev_name(&chan->dev), i); break; } thread->chan = dtc->chan; smp_wmb(); thread->task = kthread_run(dmatest_func, thread, "%s-test%u", - chan->dev.bus_id, i); + dev_name(&chan->dev), i); if (IS_ERR(thread->task)) { pr_warning("dmatest: Failed to run thread %s-test%u\n", - chan->dev.bus_id, i); + dev_name(&chan->dev), i); kfree(thread); break; } @@ -362,7 +362,7 @@ static enum dma_state_client dmatest_add_channel(struct dma_chan *chan) list_add_tail(&thread->node, &dtc->threads); } - pr_info("dmatest: Started %u threads using %s\n", i, chan->dev.bus_id); + pr_info("dmatest: Started %u threads using %s\n", i, dev_name(&chan->dev)); list_add_tail(&dtc->node, &dmatest_channels); nr_channels++; @@ -379,7 +379,7 @@ static enum dma_state_client dmatest_remove_channel(struct dma_chan *chan) list_del(&dtc->node); dmatest_cleanup_channel(dtc); pr_debug("dmatest: lost channel %s\n", - chan->dev.bus_id); + dev_name(&chan->dev)); return DMA_ACK; } } @@ -418,7 +418,7 @@ dmatest_event(struct dma_client *client, struct dma_chan *chan, default: pr_info("dmatest: Unhandled event %u (%s)\n", - state, chan->dev.bus_id); + state, dev_name(&chan->dev)); break; } -- cgit v1.2.3-70-g09d2 From 2485b8674bf5762822e14e1554938e36511c0ae4 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Mon, 10 Nov 2008 13:54:43 +0900 Subject: PCI: ignore bit0 of _OSC return code Currently acpi_run_osc() checks all the bits in _OSC result code (the first DWORD in the capabilities buffer) to see error condition. But the bit 0, which doesn't indicate any error, must be ignored. The bit 0 is used as the query flag at _OSC invocation time. Some platforms clear it during _OSC evaluation, but the others don't. On latter platforms, current acpi_run_osc() mis-detects error when _OSC is evaluated with query flag set because it doesn't ignore the bit 0. Because of this, the __acpi_query_osc() always fails on such platforms. And this is the cause of the problem that pci_osc_control_set() doesn't work since the commit 4e39432f4df544d3dfe4fc90a22d87de64d15815 which changed pci_osc_control_set() to use __acpi_query_osc(). Tested-by:"Tomasz Czernecki Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/pci-acpi.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index b3a63edb690..ae5ec76dca7 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -63,7 +63,7 @@ static acpi_status acpi_run_osc(acpi_handle handle, union acpi_object in_params[4]; struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; union acpi_object *out_obj; - u32 osc_dw0, flags = osc_args->capbuf[OSC_QUERY_TYPE]; + u32 errors, flags = osc_args->capbuf[OSC_QUERY_TYPE]; /* Setting up input parameters */ input.count = 4; @@ -92,15 +92,16 @@ static acpi_status acpi_run_osc(acpi_handle handle, status = AE_TYPE; goto out_kfree; } - osc_dw0 = *((u32 *)out_obj->buffer.pointer); - if (osc_dw0) { - if (osc_dw0 & OSC_REQUEST_ERROR) + /* Need to ignore the bit0 in result code */ + errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); + if (errors) { + if (errors & OSC_REQUEST_ERROR) printk(KERN_DEBUG "_OSC request fails\n"); - if (osc_dw0 & OSC_INVALID_UUID_ERROR) + if (errors & OSC_INVALID_UUID_ERROR) printk(KERN_DEBUG "_OSC invalid UUID\n"); - if (osc_dw0 & OSC_INVALID_REVISION_ERROR) + if (errors & OSC_INVALID_REVISION_ERROR) printk(KERN_DEBUG "_OSC invalid revision\n"); - if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) { + if (errors & OSC_CAPABILITIES_MASK_ERROR) { if (flags & OSC_QUERY_ENABLE) goto out_success; printk(KERN_DEBUG "_OSC FW not grant req. control\n"); -- cgit v1.2.3-70-g09d2 From 1cfe62c8010ac56e1bd3827e30386a87cc2f3594 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Tue, 28 Oct 2008 00:35:30 +0300 Subject: ACPI: EC: revert msleep patch With the better solution for EC interrupt storm issue, there is no need to use msleep over udelay. References: http://bugzilla.kernel.org/show_bug.cgi?id=11810 http://bugzilla.kernel.org/show_bug.cgi?id=10724 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index ef42316f89f..3ef5b796a68 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -239,10 +239,10 @@ static int ec_check_sci(struct acpi_ec *ec, u8 state) static int ec_poll(struct acpi_ec *ec) { unsigned long delay = jiffies + msecs_to_jiffies(ACPI_EC_DELAY); - msleep(1); + udelay(ACPI_EC_UDELAY); while (time_before(jiffies, delay)) { gpe_transaction(ec, acpi_ec_read_status(ec)); - msleep(1); + udelay(ACPI_EC_UDELAY); if (ec_transaction_done(ec)) return 0; } -- cgit v1.2.3-70-g09d2 From f8248434e6a11d7cd314281be3b39bbcf82fc243 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Sat, 1 Nov 2008 11:05:26 +0000 Subject: ACPI: EC: make kernel messages more useful when GPE storm is detected Make sure we can tell if the GPE storm workaround gets activated, and avoid flooding the logs afterwards. http://bugzilla.kernel.org/show_bug.cgi?id=11841 "plenty of line "ACPI: EC: non-query interrupt received, switching to interrupt mode" in dmesg" Signed-off-by: Alan Jenkins Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 3ef5b796a68..b340e08cf1d 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -286,7 +286,8 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); } else if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && t->irq_count > ACPI_EC_STORM_THRESHOLD) { - pr_debug(PREFIX "GPE storm detected\n"); + pr_info(PREFIX "GPE storm detected, " + "transactions will use polling mode\n"); set_bit(EC_FLAGS_GPE_STORM, &ec->flags); } return ret; @@ -566,9 +567,15 @@ static u32 acpi_ec_gpe_handler(void *data) if (!test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && !test_bit(EC_FLAGS_NO_GPE, &ec->flags)) { /* this is non-query, must be confirmation */ - if (printk_ratelimit()) - pr_info(PREFIX "non-query interrupt received," + if (!test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + if (printk_ratelimit()) + pr_info(PREFIX "non-query interrupt received," + " switching to interrupt mode\n"); + } else { + /* hush, STORM switches the mode every transaction */ + pr_debug(PREFIX "non-query interrupt received," " switching to interrupt mode\n"); + } set_bit(EC_FLAGS_GPE_MODE, &ec->flags); } return ACPI_INTERRUPT_HANDLED; -- cgit v1.2.3-70-g09d2 From dd15f8c42af09031e27da5b4d697ce925511f2e1 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Sat, 8 Nov 2008 21:42:30 +0300 Subject: ACPI: EC: wait for last write gpe There is a possibility that EC might break if next command is issued within 1 us after write or burst-disable command. Suggestd-by: Zhao Yakui Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index b340e08cf1d..cebd65d2e2a 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -102,6 +102,7 @@ struct transaction { u8 command; u8 wlen; u8 rlen; + bool done; }; static struct acpi_ec { @@ -178,7 +179,7 @@ static int ec_transaction_done(struct acpi_ec *ec) unsigned long flags; int ret = 0; spin_lock_irqsave(&ec->curr_lock, flags); - if (!ec->curr || (!ec->curr->wlen && !ec->curr->rlen)) + if (!ec->curr || ec->curr->done) ret = 1; spin_unlock_irqrestore(&ec->curr_lock, flags); return ret; @@ -195,17 +196,20 @@ static void gpe_transaction(struct acpi_ec *ec, u8 status) acpi_ec_write_data(ec, *(ec->curr->wdata++)); --ec->curr->wlen; } else - /* false interrupt, state didn't change */ - ++ec->curr->irq_count; - + goto err; } else if (ec->curr->rlen > 0) { if ((status & ACPI_EC_FLAG_OBF) == 1) { *(ec->curr->rdata++) = acpi_ec_read_data(ec); - --ec->curr->rlen; + if (--ec->curr->rlen == 0) + ec->curr->done = true; } else - /* false interrupt, state didn't change */ - ++ec->curr->irq_count; - } + goto err; + } else if (ec->curr->wlen == 0 && (status & ACPI_EC_FLAG_IBF) == 0) + ec->curr->done = true; + goto unlock; +err: + /* false interrupt, state didn't change */ + ++ec->curr->irq_count; unlock: spin_unlock_irqrestore(&ec->curr_lock, flags); } @@ -265,6 +269,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, spin_lock_irqsave(&ec->curr_lock, tmp); /* following two actions should be kept atomic */ t->irq_count = 0; + t->done = false; ec->curr = t; acpi_ec_write_cmd(ec, ec->curr->command); if (ec->curr->command == ACPI_EC_COMMAND_QUERY) -- cgit v1.2.3-70-g09d2 From a2f93aeadf97e870ff385030633a73e21146815d Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 12 Nov 2008 01:40:19 +0300 Subject: ACPI: EC: restart failed command Restart current transaction if we recieved unexpected GPEs instead of needed ones. http://bugzilla.kernel.org/show_bug.cgi?id=11896 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 41 +++++++++++++++++++++++++++++------------ 1 file changed, 29 insertions(+), 12 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index cebd65d2e2a..34c67ca3beb 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -100,6 +100,8 @@ struct transaction { u8 *rdata; unsigned short irq_count; u8 command; + u8 wi; + u8 ri; u8 wlen; u8 rlen; bool done; @@ -185,26 +187,34 @@ static int ec_transaction_done(struct acpi_ec *ec) return ret; } +static void start_transaction(struct acpi_ec *ec) +{ + ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0; + ec->curr->done = false; + acpi_ec_write_cmd(ec, ec->curr->command); +} + static void gpe_transaction(struct acpi_ec *ec, u8 status) { unsigned long flags; spin_lock_irqsave(&ec->curr_lock, flags); if (!ec->curr) goto unlock; - if (ec->curr->wlen > 0) { - if ((status & ACPI_EC_FLAG_IBF) == 0) { - acpi_ec_write_data(ec, *(ec->curr->wdata++)); - --ec->curr->wlen; - } else + if (ec->curr->wlen > ec->curr->wi) { + if ((status & ACPI_EC_FLAG_IBF) == 0) + acpi_ec_write_data(ec, + ec->curr->wdata[ec->curr->wi++]); + else goto err; - } else if (ec->curr->rlen > 0) { + } else if (ec->curr->rlen > ec->curr->ri) { if ((status & ACPI_EC_FLAG_OBF) == 1) { - *(ec->curr->rdata++) = acpi_ec_read_data(ec); - if (--ec->curr->rlen == 0) + ec->curr->rdata[ec->curr->ri++] = acpi_ec_read_data(ec); + if (ec->curr->rlen == ec->curr->ri) ec->curr->done = true; } else goto err; - } else if (ec->curr->wlen == 0 && (status & ACPI_EC_FLAG_IBF) == 0) + } else if (ec->curr->wlen == ec->curr->wi && + (status & ACPI_EC_FLAG_IBF) == 0) ec->curr->done = true; goto unlock; err: @@ -219,6 +229,15 @@ static int acpi_ec_wait(struct acpi_ec *ec) if (wait_event_timeout(ec->wait, ec_transaction_done(ec), msecs_to_jiffies(ACPI_EC_DELAY))) return 0; + /* try restart command if we get any false interrupts */ + if (ec->curr->irq_count && + (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) { + pr_debug(PREFIX "controller reset, restart transaction\n"); + start_transaction(ec); + if (wait_event_timeout(ec->wait, ec_transaction_done(ec), + msecs_to_jiffies(ACPI_EC_DELAY))) + return 0; + } /* missing GPEs, switch back to poll mode */ if (printk_ratelimit()) pr_info(PREFIX "missing confirmations, " @@ -268,10 +287,8 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, /* start transaction */ spin_lock_irqsave(&ec->curr_lock, tmp); /* following two actions should be kept atomic */ - t->irq_count = 0; - t->done = false; ec->curr = t; - acpi_ec_write_cmd(ec, ec->curr->command); + start_transaction(ec); if (ec->curr->command == ACPI_EC_COMMAND_QUERY) clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); spin_unlock_irqrestore(&ec->curr_lock, tmp); -- cgit v1.2.3-70-g09d2 From 0b7084ac67fb84f0cf2f8bc02d7e0dea8521dd2d Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Sat, 25 Oct 2008 21:48:46 +0400 Subject: ACPICA: Use spinlock for acpi_{en|dis}able_gpe Disabling gpe might interfere with gpe detection/handling, thus producing "interrupt not handled" errors. Ironically, disabling of GPE from interrupt context is already under spinlock, so only userspace needs to start using it. Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/button.c | 2 +- drivers/acpi/ec.c | 10 +++++----- drivers/acpi/events/evxfevnt.c | 35 +++++++++-------------------------- drivers/acpi/sleep/wakeup.c | 8 ++++---- drivers/acpi/system.c | 4 ++-- include/acpi/acpixf.h | 4 ++-- 6 files changed, 23 insertions(+), 40 deletions(-) diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index cb046c3fc3f..eb6bf3025f9 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -479,7 +479,7 @@ static int acpi_button_add(struct acpi_device *device) device->wakeup.gpe_number, ACPI_GPE_TYPE_WAKE_RUN); acpi_enable_gpe(device->wakeup.gpe_device, - device->wakeup.gpe_number, ACPI_NOT_ISR); + device->wakeup.gpe_number); device->wakeup.state.enabled = 1; } diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 34c67ca3beb..89d6d2868e8 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -282,7 +282,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, /* disable GPE during transaction if storm is detected */ if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); - acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_disable_gpe(NULL, ec->gpe); } /* start transaction */ spin_lock_irqsave(&ec->curr_lock, tmp); @@ -305,7 +305,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, /* check if we received SCI during transaction */ ec_check_sci(ec, acpi_ec_read_status(ec)); /* it is safe to enable GPE outside of transaction */ - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_enable_gpe(NULL, ec->gpe); } else if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && t->irq_count > ACPI_EC_STORM_THRESHOLD) { pr_info(PREFIX "GPE storm detected, " @@ -897,7 +897,7 @@ static int ec_install_handlers(struct acpi_ec *ec) if (ACPI_FAILURE(status)) return -ENODEV; acpi_set_gpe_type(NULL, ec->gpe, ACPI_GPE_TYPE_RUNTIME); - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_enable_gpe(NULL, ec->gpe); status = acpi_install_address_space_handler(ec->handle, ACPI_ADR_SPACE_EC, &acpi_ec_space_handler, @@ -1036,7 +1036,7 @@ static int acpi_ec_suspend(struct acpi_device *device, pm_message_t state) /* Stop using GPE */ set_bit(EC_FLAGS_NO_GPE, &ec->flags); clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); - acpi_disable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_disable_gpe(NULL, ec->gpe); return 0; } @@ -1045,7 +1045,7 @@ static int acpi_ec_resume(struct acpi_device *device) struct acpi_ec *ec = acpi_driver_data(device); /* Enable use of GPE back */ clear_bit(EC_FLAGS_NO_GPE, &ec->flags); - acpi_enable_gpe(NULL, ec->gpe, ACPI_NOT_ISR); + acpi_enable_gpe(NULL, ec->gpe); return 0; } diff --git a/drivers/acpi/events/evxfevnt.c b/drivers/acpi/events/evxfevnt.c index 73bfd6bf962..39db00874a2 100644 --- a/drivers/acpi/events/evxfevnt.c +++ b/drivers/acpi/events/evxfevnt.c @@ -248,21 +248,15 @@ ACPI_EXPORT_SYMBOL(acpi_set_gpe_type) * DESCRIPTION: Enable an ACPI event (general purpose) * ******************************************************************************/ -acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) +acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number) { acpi_status status = AE_OK; + acpi_cpu_flags flags; struct acpi_gpe_event_info *gpe_event_info; ACPI_FUNCTION_TRACE(acpi_enable_gpe); - /* Use semaphore lock if not executing at interrupt level */ - - if (flags & ACPI_NOT_ISR) { - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ @@ -277,9 +271,7 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) status = acpi_ev_enable_gpe(gpe_event_info, TRUE); unlock_and_exit: - if (flags & ACPI_NOT_ISR) { - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - } + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } @@ -299,22 +291,15 @@ ACPI_EXPORT_SYMBOL(acpi_enable_gpe) * DESCRIPTION: Disable an ACPI event (general purpose) * ******************************************************************************/ -acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) +acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number) { acpi_status status = AE_OK; + acpi_cpu_flags flags; struct acpi_gpe_event_info *gpe_event_info; ACPI_FUNCTION_TRACE(acpi_disable_gpe); - /* Use semaphore lock if not executing at interrupt level */ - - if (flags & ACPI_NOT_ISR) { - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } - + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); @@ -325,10 +310,8 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) status = acpi_ev_disable_gpe(gpe_event_info); - unlock_and_exit: - if (flags & ACPI_NOT_ISR) { - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - } +unlock_and_exit: + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c index 38655eb132d..dea4c23df76 100644 --- a/drivers/acpi/sleep/wakeup.c +++ b/drivers/acpi/sleep/wakeup.c @@ -88,7 +88,7 @@ void acpi_enable_wakeup_device(u8 sleep_state) spin_unlock(&acpi_device_lock); if (!dev->wakeup.flags.run_wake) acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_ISR); + dev->wakeup.gpe_number); spin_lock(&acpi_device_lock); } spin_unlock(&acpi_device_lock); @@ -122,7 +122,7 @@ void acpi_disable_wakeup_device(u8 sleep_state) ACPI_GPE_TYPE_WAKE_RUN); /* Re-enable it, since set_gpe_type will disable it */ acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); + dev->wakeup.gpe_number); spin_lock(&acpi_device_lock); } continue; @@ -133,7 +133,7 @@ void acpi_disable_wakeup_device(u8 sleep_state) /* Never disable run-wake GPE */ if (!dev->wakeup.flags.run_wake) { acpi_disable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); + dev->wakeup.gpe_number); acpi_clear_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_NOT_ISR); } @@ -162,7 +162,7 @@ static int __init acpi_wakeup_device_init(void) dev->wakeup.gpe_number, ACPI_GPE_TYPE_WAKE_RUN); acpi_enable_gpe(dev->wakeup.gpe_device, - dev->wakeup.gpe_number, ACPI_NOT_ISR); + dev->wakeup.gpe_number); dev->wakeup.state.enabled = 1; spin_lock(&acpi_device_lock); } diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 1d74171b794..11995b612ad 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -394,10 +394,10 @@ static ssize_t counter_set(struct kobject *kobj, if (index < num_gpes) { if (!strcmp(buf, "disable\n") && (status & ACPI_EVENT_FLAG_ENABLED)) - result = acpi_disable_gpe(handle, index, ACPI_NOT_ISR); + result = acpi_disable_gpe(handle, index); else if (!strcmp(buf, "enable\n") && !(status & ACPI_EVENT_FLAG_ENABLED)) - result = acpi_enable_gpe(handle, index, ACPI_NOT_ISR); + result = acpi_enable_gpe(handle, index); else if (!strcmp(buf, "clear\n") && (status & ACPI_EVENT_FLAG_SET)) result = acpi_clear_gpe(handle, index, ACPI_NOT_ISR); diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 94d94e126e9..33bc0e3b195 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -252,9 +252,9 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status); acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type); -acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags); +acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number); -acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags); +acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number); acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags); -- cgit v1.2.3-70-g09d2 From 06cf7d3c7af902939cd1754abcafb2464060cba8 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Sun, 9 Nov 2008 19:01:06 +0300 Subject: ACPI: EC: lower interrupt storm treshold http://bugzilla.kernel.org/show_bug.cgi?id=11892 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 89d6d2868e8..ab84f99f136 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -70,7 +70,7 @@ enum ec_command { #define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */ #define ACPI_EC_UDELAY 100 /* Wait 100us before polling EC again */ -#define ACPI_EC_STORM_THRESHOLD 20 /* number of false interrupts +#define ACPI_EC_STORM_THRESHOLD 8 /* number of false interrupts per one transaction */ enum { -- cgit v1.2.3-70-g09d2 From 8517934ef6aaa28d6e055b98df65b31cedbd1372 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Tue, 11 Nov 2008 12:54:11 +0300 Subject: ACPI: EC: Don't do transaction from GPE handler in poll mode. Referencies: http://bugzilla.kernel.org/show_bug.cgi?id=12004 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index ab84f99f136..bd1af3e9e4c 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -581,9 +581,12 @@ static u32 acpi_ec_gpe_handler(void *data) pr_debug(PREFIX "~~~> interrupt\n"); status = acpi_ec_read_status(ec); - gpe_transaction(ec, status); - if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0) - wake_up(&ec->wait); + if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags)) { + gpe_transaction(ec, status); + if (ec_transaction_done(ec) && + (status & ACPI_EC_FLAG_IBF) == 0) + wake_up(&ec->wait); + } ec_check_sci(ec, status); if (!test_bit(EC_FLAGS_GPE_MODE, &ec->flags) && -- cgit v1.2.3-70-g09d2 From fad96ab62d38b94efbdb4c3c5fc55cb90d57937d Mon Sep 17 00:00:00 2001 From: Stefan Roscher Date: Tue, 11 Nov 2008 15:44:22 -0800 Subject: IB/ehca: Remove reference to special QP in case of port activation failure If the initialization of a special QP (e.g. AQP1) fails due to a software timeout, we have to remove the reference to that special QP struct from the port struct to stop the driver from accessing the QP, since it will be/has been destroyed by the caller, eg in this case ib_mad. Signed-off-by: Stefan Roscher Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_irq.c | 44 ++++++++++++++++++++++------------- drivers/infiniband/hw/ehca/ehca_qp.c | 5 ++++ 2 files changed, 33 insertions(+), 16 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c index cb55be04442..757035ea246 100644 --- a/drivers/infiniband/hw/ehca/ehca_irq.c +++ b/drivers/infiniband/hw/ehca/ehca_irq.c @@ -359,36 +359,48 @@ static void notify_port_conf_change(struct ehca_shca *shca, int port_num) *old_attr = new_attr; } +/* replay modify_qp for sqps -- return 0 if all is well, 1 if AQP1 destroyed */ +static int replay_modify_qp(struct ehca_sport *sport) +{ + int aqp1_destroyed; + unsigned long flags; + + spin_lock_irqsave(&sport->mod_sqp_lock, flags); + + aqp1_destroyed = !sport->ibqp_sqp[IB_QPT_GSI]; + + if (sport->ibqp_sqp[IB_QPT_SMI]) + ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]); + if (!aqp1_destroyed) + ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]); + + spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); + + return aqp1_destroyed; +} + static void parse_ec(struct ehca_shca *shca, u64 eqe) { u8 ec = EHCA_BMASK_GET(NEQE_EVENT_CODE, eqe); u8 port = EHCA_BMASK_GET(NEQE_PORT_NUMBER, eqe); u8 spec_event; struct ehca_sport *sport = &shca->sport[port - 1]; - unsigned long flags; switch (ec) { case 0x30: /* port availability change */ if (EHCA_BMASK_GET(NEQE_PORT_AVAILABILITY, eqe)) { - int suppress_event; - /* replay modify_qp for sqps */ - spin_lock_irqsave(&sport->mod_sqp_lock, flags); - suppress_event = !sport->ibqp_sqp[IB_QPT_GSI]; - if (sport->ibqp_sqp[IB_QPT_SMI]) - ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_SMI]); - if (!suppress_event) - ehca_recover_sqp(sport->ibqp_sqp[IB_QPT_GSI]); - spin_unlock_irqrestore(&sport->mod_sqp_lock, flags); - - /* AQP1 was destroyed, ignore this event */ - if (suppress_event) - break; + /* only replay modify_qp calls in autodetect mode; + * if AQP1 was destroyed, the port is already down + * again and we can drop the event. + */ + if (ehca_nr_ports < 0) + if (replay_modify_qp(sport)) + break; sport->port_state = IB_PORT_ACTIVE; dispatch_port_event(shca, port, IB_EVENT_PORT_ACTIVE, "is active"); - ehca_query_sma_attr(shca, port, - &sport->saved_attr); + ehca_query_sma_attr(shca, port, &sport->saved_attr); } else { sport->port_state = IB_PORT_DOWN; dispatch_port_event(shca, port, IB_EVENT_PORT_ERR, diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index 4d54b9f6456..9e05ee2db39 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -860,6 +860,11 @@ static struct ehca_qp *internal_create_qp( if (qp_type == IB_QPT_GSI) { h_ret = ehca_define_sqp(shca, my_qp, init_attr); if (h_ret != H_SUCCESS) { + kfree(my_qp->mod_qp_parm); + my_qp->mod_qp_parm = NULL; + /* the QP pointer is no longer valid */ + shca->sport[init_attr->port_num - 1].ibqp_sqp[qp_type] = + NULL; ret = ehca2ib_return_code(h_ret); goto create_qp_exit6; } -- cgit v1.2.3-70-g09d2 From 56960b546a88844a6f5295a9f81aab9e6b81edc9 Mon Sep 17 00:00:00 2001 From: Tony Vroon Date: Sun, 9 Nov 2008 04:20:05 +0000 Subject: fujitsu-laptop: Add DMI callback for Lifebook S6420 The Lifebook S6420 is the ICH9M-based follow-up to the S6410. The application panel contains the following keys: lock, mobility center, eco, info. Whilst key 4 might be more appropriate for help then key 2, I've done things the S6410 way. I can confirm that backlight control is functional, and that the lock key activates the Gnome screensaver as expected. Signed-off-by: Tony Vroon Acked-by: Jonathan Woithe Signed-off-by: Len Brown --- drivers/misc/fujitsu-laptop.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index 9124fcdc4d0..5ec77ae08d9 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -464,6 +464,14 @@ static int dmi_check_cb_s6410(const struct dmi_system_id *id) return 0; } +static int dmi_check_cb_s6420(const struct dmi_system_id *id) +{ + dmi_check_cb_common(id); + fujitsu->keycode1 = KEY_SCREENLOCK; /* "Lock" */ + fujitsu->keycode2 = KEY_HELP; /* "Mobility Center" */ + return 0; +} + static int dmi_check_cb_p8010(const struct dmi_system_id *id) { dmi_check_cb_common(id); @@ -481,6 +489,13 @@ static struct dmi_system_id fujitsu_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"), }, .callback = dmi_check_cb_s6410}, + { + .ident = "Fujitsu Siemens S6420", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"), + }, + .callback = dmi_check_cb_s6420}, { .ident = "Fujitsu LifeBook P8010", .matches = { -- cgit v1.2.3-70-g09d2 From 32836259ff25ce97010569706cd33ba94de81d62 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 5 Nov 2008 16:17:52 -0700 Subject: ACPI: pci_link: remove acpi_irq_balance_set() interface This removes the acpi_irq_balance_set() interface from the PCI interrupt link driver. x86 used acpi_irq_balance_set() to tell the PCI interrupt link driver to configure links to minimize IRQ sharing. But the link driver can easily figure out whether to turn on IRQ balancing based on the IRQ model (PIC/IOAPIC/etc), so we can get rid of that external interface. It's better for the driver to figure this out at init-time. If we set it externally via the x86 code, the interface reduces modularity, and we depend on the fact that acpi_process_madt() happens before we process the kernel command line. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- arch/x86/include/asm/acpi.h | 1 - arch/x86/kernel/acpi/boot.c | 1 - drivers/acpi/pci_link.c | 11 +++++++++-- 3 files changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 8d676d8ecde..9830681446a 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -113,7 +113,6 @@ static inline void acpi_disable_pci(void) acpi_pci_disabled = 1; acpi_noirq_set(); } -extern int acpi_irq_balance_set(char *str); /* routines for saving/restoring kernel state */ extern int acpi_save_state_mem(void); diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 8c1f76abae9..4c51a2f8fd3 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1343,7 +1343,6 @@ static void __init acpi_process_madt(void) error = acpi_parse_madt_ioapic_entries(); if (!error) { acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC; - acpi_irq_balance_set(NULL); acpi_ioapic = 1; smp_found_config = 1; diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index fcfdef7b4fd..e52ad91ce2d 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -531,7 +531,7 @@ int __init acpi_irq_penalty_init(void) return 0; } -static int acpi_irq_balance; /* 0: static, 1: balance */ +static int acpi_irq_balance = -1; /* 0: static, 1: balance */ static int acpi_pci_link_allocate(struct acpi_pci_link *link) { @@ -950,10 +950,17 @@ device_initcall(irqrouter_init_sysfs); static int __init acpi_pci_link_init(void) { - if (acpi_noirq) return 0; + if (acpi_irq_balance == -1) { + /* no command line switch: enable balancing in IOAPIC mode */ + if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) + acpi_irq_balance = 1; + else + acpi_irq_balance = 0; + } + acpi_link.count = 0; INIT_LIST_HEAD(&acpi_link.entries); -- cgit v1.2.3-70-g09d2 From 1a22f08dbd0e77c7cf45b5f527f93131d0b591b6 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 11 Nov 2008 12:19:05 +0900 Subject: serial: sh-sci: fix cannot work SH7723 SCIFA SH7723 has SCIFA. This module is similer SCI register map, but it has FIFO. So this patch adds new type(PORT_SCIFA) and change some type checking. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 20 +++++++++++--------- drivers/serial/sh-sci.h | 16 ++++++++-------- include/linux/serial_core.h | 3 +++ 3 files changed, 22 insertions(+), 17 deletions(-) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 5c0f32c7fbf..518c0321e4d 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -478,10 +478,10 @@ static void sci_transmit_chars(struct uart_port *port) return; } - if (port->type == PORT_SCIF) - count = scif_txroom(port); - else + if (port->type == PORT_SCI) count = sci_txroom(port); + else + count = scif_txroom(port); do { unsigned char c; @@ -510,7 +510,7 @@ static void sci_transmit_chars(struct uart_port *port) } else { ctrl = sci_in(port, SCSCR); - if (port->type == PORT_SCIF) { + if (port->type != PORT_SCI) { sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); } @@ -536,10 +536,10 @@ static inline void sci_receive_chars(struct uart_port *port) return; while (1) { - if (port->type == PORT_SCIF) - count = scif_rxroom(port); - else + if (port->type == PORT_SCI) count = sci_rxroom(port); + else + count = scif_rxroom(port); /* Don't copy more bytes than there is room for in the buffer */ count = tty_buffer_request_room(tty, count); @@ -714,7 +714,7 @@ static inline int sci_handle_breaks(struct uart_port *port) #if defined(SCIF_ORER) /* XXX: Handle SCIF overrun error */ - if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { + if (port->type != PORT_SCI && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { sci_out(port, SCLSR, 0); if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) { copied++; @@ -1042,7 +1042,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ - if (port->type == PORT_SCIF) + if (port->type != PORT_SCI) sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); smr_val = sci_in(port, SCSMR) & 3; @@ -1085,6 +1085,7 @@ static const char *sci_type(struct uart_port *port) case PORT_SCI: return "sci"; case PORT_SCIF: return "scif"; case PORT_IRDA: return "irda"; + case PORT_SCIFA: return "scifa"; } return NULL; @@ -1112,6 +1113,7 @@ static void sci_config_port(struct uart_port *port, int flags) s->init_pins = sci_init_pins_sci; break; case PORT_SCIF: + case PORT_SCIFA: s->init_pins = sci_init_pins_scif; break; case PORT_IRDA: diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 6163a45f968..9f33b064172 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -289,18 +289,18 @@ #define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\ static inline unsigned int sci_##name##_in(struct uart_port *port) \ { \ - if (port->type == PORT_SCI) { \ - SCI_IN(sci_size, sci_offset) \ - } else { \ - SCI_IN(scif_size, scif_offset); \ + if (port->type == PORT_SCIF) { \ + SCI_IN(scif_size, scif_offset) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_IN(sci_size, sci_offset); \ } \ } \ static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ { \ - if (port->type == PORT_SCI) { \ - SCI_OUT(sci_size, sci_offset, value) \ - } else { \ - SCI_OUT(scif_size, scif_offset, value); \ + if (port->type == PORT_SCIF) { \ + SCI_OUT(scif_size, scif_offset, value) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_OUT(sci_size, sci_offset, value); \ } \ } diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index e27f216361f..4e4f1277f3b 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -155,6 +155,9 @@ #define PORT_SC26XX 82 +/* SH-SCI */ +#define PORT_SCIFA 83 + #ifdef __KERNEL__ #include -- cgit v1.2.3-70-g09d2 From 51ee3d92bfb983790b9ed576c22f59d42adff329 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 11 Nov 2008 12:19:11 +0900 Subject: fix sci type for SH7723 This patch changes sci type of SH7723 from PORT_SCI to PORT_SCIFA. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index a7412cede53..6d9e6972cfc 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -119,17 +119,17 @@ static struct plat_sci_port sci_platform_data[] = { },{ .mapbase = 0xa4e30000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, + .type = PORT_SCIFA, .irqs = { 56, 56, 56, 56 }, },{ .mapbase = 0xa4e40000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, + .type = PORT_SCIFA, .irqs = { 88, 88, 88, 88 }, },{ .mapbase = 0xa4e50000, .flags = UPF_BOOT_AUTOCONF, - .type = PORT_SCI, + .type = PORT_SCIFA, .irqs = { 109, 109, 109, 109 }, }, { .flags = 0, -- cgit v1.2.3-70-g09d2 From ade7a9b4ccd20ab8159c77a0abd20552f2d6b06c Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 11 Nov 2008 16:47:21 +0900 Subject: usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USB When I used SuperH on-chip USB, there was the problem that accessed r8a66597_root_hub which was not allocated. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- drivers/usb/host/r8a66597-hcd.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index c18d8790c41..2376f24f3c8 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1763,11 +1763,12 @@ static void r8a66597_timer(unsigned long _r8a66597) { struct r8a66597 *r8a66597 = (struct r8a66597 *)_r8a66597; unsigned long flags; + int port; spin_lock_irqsave(&r8a66597->lock, flags); - r8a66597_root_hub_control(r8a66597, 0); - r8a66597_root_hub_control(r8a66597, 1); + for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) + r8a66597_root_hub_control(r8a66597, port); spin_unlock_irqrestore(&r8a66597->lock, flags); } -- cgit v1.2.3-70-g09d2 From 185aed75570fb4f78ef283dfa26cd9da5fa06a91 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 12 Nov 2008 12:53:48 +0900 Subject: sh: Provide a sane valid_phys_addr_range() to prevent TLB reset with PMB. With the PMB enabled, only P1SEG and up are covered by the PMB mappings, meaning that situations where out-of-bounds physical addresses are read from will lead to TLB reset after the PMB miss, allowing for use cases like dd if=/dev/mem to reset the TLB. Fix this up to make sure the reference is between __MEMORY_START (phys) and __pa(high_memory). This is coherent across all variants of sh/sh64 with and without MMU, though the PMB bug itself is only applicable to SH-4A parts. Reported-by: Hideo Saito Signed-off-by: Paul Mundt --- arch/sh/include/asm/io.h | 4 ++++ arch/sh/mm/Makefile_32 | 2 +- arch/sh/mm/Makefile_64 | 2 +- arch/sh/mm/mmap.c | 31 +++++++++++++++++++++++++++++++ 4 files changed, 37 insertions(+), 2 deletions(-) create mode 100644 arch/sh/mm/mmap.c diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index 436c2853957..65eaae34e75 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -293,6 +293,10 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) */ #define xlate_dev_kmem_ptr(p) p +#define ARCH_HAS_VALID_PHYS_ADDR_RANGE +int valid_phys_addr_range(unsigned long addr, size_t size); +int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); + #endif /* __KERNEL__ */ #endif /* __ASM_SH_IO_H */ diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32 index 70e0906023c..f066e76da20 100644 --- a/arch/sh/mm/Makefile_32 +++ b/arch/sh/mm/Makefile_32 @@ -2,7 +2,7 @@ # Makefile for the Linux SuperH-specific parts of the memory manager. # -obj-y := init.o extable_32.o consistent.o +obj-y := init.o extable_32.o consistent.o mmap.o ifndef CONFIG_CACHE_OFF cache-$(CONFIG_CPU_SH2) := cache-sh2.o diff --git a/arch/sh/mm/Makefile_64 b/arch/sh/mm/Makefile_64 index 0d92a8a3ac9..9481d0f54ef 100644 --- a/arch/sh/mm/Makefile_64 +++ b/arch/sh/mm/Makefile_64 @@ -2,7 +2,7 @@ # Makefile for the Linux SuperH-specific parts of the memory manager. # -obj-y := init.o consistent.o +obj-y := init.o consistent.o mmap.o mmu-y := tlb-nommu.o pg-nommu.o extable_32.o mmu-$(CONFIG_MMU) := fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o \ diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c new file mode 100644 index 00000000000..1f3cc3d92d3 --- /dev/null +++ b/arch/sh/mm/mmap.c @@ -0,0 +1,31 @@ +/* + * arch/sh/mm/mmap.c + * + * Copyright (C) 2008 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include + +/* + * You really shouldn't be using read() or write() on /dev/mem. This + * might go away in the future. + */ +int valid_phys_addr_range(unsigned long addr, size_t count) +{ + if (addr < (PAGE_OFFSET + (PFN_START << PAGE_SHIFT))) + return 0; + if (addr + count > __pa(high_memory)) + return 0; + + return 1; +} + +int valid_mmap_phys_addr_range(unsigned long pfn, size_t size) +{ + return 1; +} -- cgit v1.2.3-70-g09d2 From 621a0d5207c18012cb39932f2d9830a11a6cb03d Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 12 Nov 2008 09:36:35 +0100 Subject: hrtimer: clean up unused callback modes Impact: cleanup git grep HRTIMER_CB_IRQSAFE revealed half the callback modes are actually unused. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- include/linux/hrtimer.h | 5 ----- kernel/hrtimer.c | 9 --------- 2 files changed, 14 deletions(-) diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 07e510a3b00..3eba43878dc 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -46,9 +46,6 @@ enum hrtimer_restart { * hrtimer callback modes: * * HRTIMER_CB_SOFTIRQ: Callback must run in softirq context - * HRTIMER_CB_IRQSAFE: Callback may run in hardirq context - * HRTIMER_CB_IRQSAFE_NO_RESTART: Callback may run in hardirq context and - * does not restart the timer * HRTIMER_CB_IRQSAFE_PERCPU: Callback must run in hardirq context * Special mode for tick emulation and * scheduler timer. Such timers are per @@ -61,8 +58,6 @@ enum hrtimer_restart { */ enum hrtimer_cb_mode { HRTIMER_CB_SOFTIRQ, - HRTIMER_CB_IRQSAFE, - HRTIMER_CB_IRQSAFE_NO_RESTART, HRTIMER_CB_IRQSAFE_PERCPU, HRTIMER_CB_IRQSAFE_UNLOCKED, }; diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 95d3949f2ae..47e63349d1b 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -664,14 +664,6 @@ static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer, /* Timer is expired, act upon the callback mode */ switch(timer->cb_mode) { - case HRTIMER_CB_IRQSAFE_NO_RESTART: - debug_hrtimer_deactivate(timer); - /* - * We can call the callback from here. No restart - * happens, so no danger of recursion - */ - BUG_ON(timer->function(timer) != HRTIMER_NORESTART); - return 1; case HRTIMER_CB_IRQSAFE_PERCPU: case HRTIMER_CB_IRQSAFE_UNLOCKED: /* @@ -683,7 +675,6 @@ static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer, */ debug_hrtimer_deactivate(timer); return 1; - case HRTIMER_CB_IRQSAFE: case HRTIMER_CB_SOFTIRQ: /* * Move everything else into the softirq pending list ! -- cgit v1.2.3-70-g09d2 From d7a8943635485597ae7c6d554a8ccf3ce5a42d2d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 12 Nov 2008 09:48:04 +0100 Subject: ALSA: hda - Fix IDT/STAC multiple HP detection Due to the recent change for multiple HP as line-out switch, only one of the multiple headphons (usually a wrong one) is toggled and the other pins are still disabled. This causes the silent output problem on some Dell laptops. Also, the hp_switch check is screwed up when a line-in or a mic-in jack exists. This is added as an additional output, but hp_switch check doesn't take it into account. This patch fixes these issues: simplify hp_switch check by using the NID instead of bool, and clean up / fix the toggle of HP pins in unsol event handler code. Reference: Novell bnc#443267 https://bugzilla.novell.com/show_bug.cgi?id=443267 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 59 ++++++++++++++++++++++++++++++++---------- 1 file changed, 45 insertions(+), 14 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index a51160106df..4300a679cd8 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -212,7 +212,7 @@ struct sigmatel_spec { /* i/o switches */ unsigned int io_switch[2]; unsigned int clfe_swap; - unsigned int hp_switch; + unsigned int hp_switch; /* NID of HP as line-out */ unsigned int aloopback; struct hda_pcm pcm_rec[2]; /* PCM information */ @@ -2443,7 +2443,7 @@ static int stac92xx_hp_switch_get(struct snd_kcontrol *kcontrol, struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct sigmatel_spec *spec = codec->spec; - ucontrol->value.integer.value[0] = spec->hp_switch; + ucontrol->value.integer.value[0] = !!spec->hp_switch; return 0; } @@ -2452,8 +2452,9 @@ static int stac92xx_hp_switch_put(struct snd_kcontrol *kcontrol, { struct hda_codec *codec = snd_kcontrol_chip(kcontrol); struct sigmatel_spec *spec = codec->spec; - - spec->hp_switch = ucontrol->value.integer.value[0]; + int nid = kcontrol->private_value; + + spec->hp_switch = ucontrol->value.integer.value[0] ? nid : 0; /* check to be sure that the ports are upto date with * switch changes @@ -2862,7 +2863,8 @@ static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec, if (cfg->hp_outs > 1) { err = stac92xx_add_control(spec, STAC_CTL_WIDGET_HP_SWITCH, - "Headphone as Line Out Switch", 0); + "Headphone as Line Out Switch", + cfg->hp_pins[cfg->hp_outs - 1]); if (err < 0) return err; } @@ -3786,11 +3788,30 @@ static int get_hp_pin_presence(struct hda_codec *codec, hda_nid_t nid) return 0; } +/* return non-zero if the hp-pin of the given array index isn't + * a jack-detection target + */ +static int no_hp_sensing(struct sigmatel_spec *spec, int i) +{ + struct auto_pin_cfg *cfg = &spec->autocfg; + + /* ignore sensing of shared line and mic jacks */ + if (spec->line_switch && + cfg->hp_pins[i] == cfg->input_pins[AUTO_PIN_LINE]) + return 1; + if (spec->mic_switch && + cfg->hp_pins[i] == cfg->input_pins[AUTO_PIN_MIC]) + return 1; + /* ignore if the pin is set as line-out */ + if (cfg->hp_pins[i] == spec->hp_switch) + return 1; + return 0; +} + static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) { struct sigmatel_spec *spec = codec->spec; struct auto_pin_cfg *cfg = &spec->autocfg; - int nid = cfg->hp_pins[cfg->hp_outs - 1]; int i, presence; presence = 0; @@ -3801,15 +3822,16 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) for (i = 0; i < cfg->hp_outs; i++) { if (presence) break; - if (spec->hp_switch && cfg->hp_pins[i] == nid) - break; + if (no_hp_sensing(spec, i)) + continue; presence = get_hp_pin_presence(codec, cfg->hp_pins[i]); } if (presence) { - /* disable lineouts, enable hp */ + /* disable lineouts */ if (spec->hp_switch) - stac92xx_reset_pinctl(codec, nid, AC_PINCTL_OUT_EN); + stac92xx_reset_pinctl(codec, spec->hp_switch, + AC_PINCTL_OUT_EN); for (i = 0; i < cfg->line_outs; i++) stac92xx_reset_pinctl(codec, cfg->line_out_pins[i], AC_PINCTL_OUT_EN); @@ -3821,9 +3843,10 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) spec->gpio_dir, spec->gpio_data & ~spec->eapd_mask); } else { - /* enable lineouts, disable hp */ + /* enable lineouts */ if (spec->hp_switch) - stac92xx_set_pinctl(codec, nid, AC_PINCTL_OUT_EN); + stac92xx_set_pinctl(codec, spec->hp_switch, + AC_PINCTL_OUT_EN); for (i = 0; i < cfg->line_outs; i++) stac92xx_set_pinctl(codec, cfg->line_out_pins[i], AC_PINCTL_OUT_EN); @@ -3835,8 +3858,16 @@ static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res) spec->gpio_dir, spec->gpio_data | spec->eapd_mask); } - if (!spec->hp_switch && cfg->hp_outs > 1 && presence) - stac92xx_set_pinctl(codec, nid, AC_PINCTL_OUT_EN); + /* toggle hp outs */ + for (i = 0; i < cfg->hp_outs; i++) { + unsigned int val = AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN; + if (no_hp_sensing(spec, i)) + continue; + if (presence) + stac92xx_set_pinctl(codec, cfg->hp_pins[i], val); + else + stac92xx_reset_pinctl(codec, cfg->hp_pins[i], val); + } } static void stac92xx_pin_sense(struct hda_codec *codec, int idx) -- cgit v1.2.3-70-g09d2 From 8f65b5354b1a34a536641bd915958662e8af5320 Mon Sep 17 00:00:00 2001 From: Doug Leith Date: Wed, 12 Nov 2008 01:41:09 -0800 Subject: tcp_htcp: last_cong bug fix This patch fixes a minor bug in tcp_htcp.c which has been highlighted by Lachlan Andrew and Lawrence Stewart. Currently, the time since the last congestion event, which is stored in variable last_cong, is reset whenever there is a state change into TCP_CA_Open. This includes transitions of the type TCP_CA_Open->TCP_CA_Disorder->TCP_CA_Open which are not associated with backoff of cwnd. The patch changes last_cong to be updated only on transitions into TCP_CA_Open that occur after experiencing the congestion-related states TCP_CA_Loss, TCP_CA_Recovery, TCP_CA_CWR. Signed-off-by: Doug Leith Signed-off-by: David S. Miller --- net/ipv4/tcp_htcp.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/net/ipv4/tcp_htcp.c b/net/ipv4/tcp_htcp.c index af99776146f..937549b8a92 100644 --- a/net/ipv4/tcp_htcp.c +++ b/net/ipv4/tcp_htcp.c @@ -69,9 +69,12 @@ static u32 htcp_cwnd_undo(struct sock *sk) const struct tcp_sock *tp = tcp_sk(sk); struct htcp *ca = inet_csk_ca(sk); - ca->last_cong = ca->undo_last_cong; - ca->maxRTT = ca->undo_maxRTT; - ca->old_maxB = ca->undo_old_maxB; + if (ca->undo_last_cong) { + ca->last_cong = ca->undo_last_cong; + ca->maxRTT = ca->undo_maxRTT; + ca->old_maxB = ca->undo_old_maxB; + ca->undo_last_cong = 0; + } return max(tp->snd_cwnd, (tp->snd_ssthresh << 7) / ca->beta); } @@ -268,7 +271,10 @@ static void htcp_state(struct sock *sk, u8 new_state) case TCP_CA_Open: { struct htcp *ca = inet_csk_ca(sk); - ca->last_cong = jiffies; + if (ca->undo_last_cong) { + ca->last_cong = jiffies; + ca->undo_last_cong = 0; + } } break; case TCP_CA_CWR: -- cgit v1.2.3-70-g09d2 From d35aac10eb7bcb3b80bef16b60844af0313f47f7 Mon Sep 17 00:00:00 2001 From: Patrick Ohly Date: Wed, 12 Nov 2008 01:54:56 -0800 Subject: net: put_cmsg_compat + SO_TIMESTAMP[NS]: use same name for value as caller In __sock_recv_timestamp() the additional SCM_TIMESTAMP[NS] is used. This has the same value as SO_TIMESTAMP[NS], so this is a purely cosmetic change. Signed-off-by: Patrick Ohly Signed-off-by: David S. Miller --- net/compat.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/compat.c b/net/compat.c index 67fb6a3834a..6ce1a1cadcc 100644 --- a/net/compat.c +++ b/net/compat.c @@ -226,14 +226,14 @@ int put_cmsg_compat(struct msghdr *kmsg, int level, int type, int len, void *dat return 0; /* XXX: return error? check spec. */ } - if (level == SOL_SOCKET && type == SO_TIMESTAMP) { + if (level == SOL_SOCKET && type == SCM_TIMESTAMP) { struct timeval *tv = (struct timeval *)data; ctv.tv_sec = tv->tv_sec; ctv.tv_usec = tv->tv_usec; data = &ctv; len = sizeof(ctv); } - if (level == SOL_SOCKET && type == SO_TIMESTAMPNS) { + if (level == SOL_SOCKET && type == SCM_TIMESTAMPNS) { struct timespec *ts = (struct timespec *)data; cts.tv_sec = ts->tv_sec; cts.tv_nsec = ts->tv_nsec; -- cgit v1.2.3-70-g09d2 From 47e74f2ba8fbf9fb1378e2524e6cfdc2fb37f160 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 12 Nov 2008 00:01:27 -0500 Subject: ring-buffer: no preempt for sched_clock() Impact: disable preemption when calling sched_clock() The ring_buffer_time_stamp still uses sched_clock as its counter. But it is a bug to call it with preemption enabled. This requirement should not be pushed to the ring_buffer_time_stamp callers, so the ring_buffer_time_stamp needs to disable preemption when calling sched_clock. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/ring_buffer.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index b08ee9f00c8..231db209fa8 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -51,8 +51,14 @@ void tracing_off(void) /* FIXME!!! */ u64 ring_buffer_time_stamp(int cpu) { + u64 time; + + preempt_disable_notrace(); /* shift to debug/test normalization and TIME_EXTENTS */ - return sched_clock() << DEBUG_SHIFT; + time = sched_clock() << DEBUG_SHIFT; + preempt_enable_notrace(); + + return time; } void ring_buffer_normalize_time_stamp(int cpu, u64 *ts) -- cgit v1.2.3-70-g09d2 From a2d477778e82a60a0b7114cefdb70aa43af28782 Mon Sep 17 00:00:00 2001 From: Balbir Singh Date: Wed, 12 Nov 2008 16:19:00 +0530 Subject: sched: fix stale value in average load per task Impact: fix load balancer load average calculation accuracy cpu_avg_load_per_task() returns a stale value when nr_running is 0. It returns an older stale (caculated when nr_running was non zero) value. This patch returns and sets rq->avg_load_per_task to zero when nr_running is 0. Compile and boot tested on a x86_64 box. Signed-off-by: Balbir Singh Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index 50a21f96467..3bafbe350f4 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1456,6 +1456,8 @@ static unsigned long cpu_avg_load_per_task(int cpu) if (rq->nr_running) rq->avg_load_per_task = rq->load.weight / rq->nr_running; + else + rq->avg_load_per_task = 0; return rq->avg_load_per_task; } -- cgit v1.2.3-70-g09d2 From b3e123cf65baadc0cc30a843fd48cfd6a4b2e1ca Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Wed, 12 Nov 2008 10:16:47 -0800 Subject: RDMA/cxgb3: Fix deadlock in iw_cxgb3 (hang when configuring interface) When the iw_cxgb3 module's cxgb3_client "add" func gets called by the cxgb3 module, the iwarp driver ends up calling the ethtool ops get_drvinfo function in cxgb3 to get the fw version and other info. Currently the iwarp driver grabs the rtnl lock around this down call to serialize. As of 2.6.27 or so, things changed such that the rtnl lock is held around the call to the netdev driver open function. Also the cxgb3_client "add" function doesn't get called if the device is down. So, if you load cxgb3, then load iw_cxgb3, then ifconfig up the device, the iw_cxgb3 add func gets called with the rtnl_lock held. If you load cxgb3, ifconfig up the device, then load iw_cxgb3, the add func gets called without the rtnl_lock held. The former causes the deadlock, the latter does not. In addition, there are iw_cxgb3 sysfs handlers that also can call down into cxgb3 to gather the fw and hw versions. These can be called concurrently on different processors and at any time. Thus we need to push this serialization down in the cxgb3 driver get_drvinfo func. The fix is to remove rtnl lock usage, and use a per-device lock in cxgb3. Signed-off-by: Steve Wise Acked-by: Divy Le Ray Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/iwch_provider.c | 6 ------ drivers/net/cxgb3/cxgb3_main.c | 2 ++ 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index ecff9804358..160ef482712 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -1102,9 +1102,7 @@ static u64 fw_vers_string_to_u64(struct iwch_dev *iwch_dev) char *cp, *next; unsigned fw_maj, fw_min, fw_mic; - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); next = info.fw_version + 1; cp = strsep(&next, "."); @@ -1192,9 +1190,7 @@ static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, ch struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.fw_version); } @@ -1207,9 +1203,7 @@ static ssize_t show_hca(struct device *dev, struct device_attribute *attr, struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; PDBG("%s dev 0x%p\n", __func__, dev); - rtnl_lock(); lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); return sprintf(buf, "%s\n", info.driver); } diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 1ace41a13ac..5e663ccda4d 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -1307,8 +1307,10 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) u32 fw_vers = 0; u32 tp_vers = 0; + spin_lock(&adapter->stats_lock); t3_get_fw_version(adapter, &fw_vers); t3_get_tp_version(adapter, &tp_vers); + spin_unlock(&adapter->stats_lock); strcpy(info->driver, DRV_NAME); strcpy(info->version, DRV_VERSION); -- cgit v1.2.3-70-g09d2 From fe25c56190bbc0951d7c53b4ccd148e669d69938 Mon Sep 17 00:00:00 2001 From: Yossi Etigin Date: Wed, 12 Nov 2008 10:24:36 -0800 Subject: IPoIB: Don't enable NAPI when it's already enabled If a P_Key is not present when an interface is created, ipoib_open() will return after doing napi_enable(). ipoib_open() will be called again from ipoib_pkey_poll() when the P_Key appears, after NAPI has already been enabled, and try to enable it again. This triggers a BUG_ON() in napi_enable(). Fix this by moving the call to napi_enable() to after the test for P_Key presence. Signed-off-by: Yossi Etigin Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index fddded7900d..b1eeb5a427c 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -106,12 +106,13 @@ int ipoib_open(struct net_device *dev) ipoib_dbg(priv, "bringing up interface\n"); - napi_enable(&priv->napi); set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags); if (ipoib_pkey_dev_delay_open(dev)) return 0; + napi_enable(&priv->napi); + if (ipoib_ib_dev_open(dev)) { napi_disable(&priv->napi); return -EINVAL; -- cgit v1.2.3-70-g09d2 From 93a3ab939ba90e00e193f0bad98f43fbdfbd925d Mon Sep 17 00:00:00 2001 From: Yossi Etigin Date: Wed, 12 Nov 2008 10:24:38 -0800 Subject: IPoIB: Fix hang in ipoib_flush_paths() ipoib_flush_paths() can hang during an SM up/down loop: if path_rec_start() fails (for instance, because there is no sm_ah), the path is still added to the path list by neigh_add_path(). Then, ipoib_flush_paths() will wait for path->done, but it will never complete because the request was not issued at all. Fix this by completing path->done if issuing the query fails. This fixes . Signed-off-by: Yossi Etigin Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index b1eeb5a427c..0b2f601e8ca 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -547,6 +547,7 @@ static int path_rec_start(struct net_device *dev, if (path->query_id < 0) { ipoib_warn(priv, "ib_sa_path_rec_get failed: %d\n", path->query_id); path->query = NULL; + complete(&path->done); return path->query_id; } -- cgit v1.2.3-70-g09d2 From ff79ae80837cf45cb703b34824dd3862d2ddcb24 Mon Sep 17 00:00:00 2001 From: Yossi Etigin Date: Wed, 12 Nov 2008 10:24:39 -0800 Subject: IPoIB: Fix crash in path_rec_completion() Fix a crash in path_rec_completion() during an SM up/down loop. If more than one path record request is issued, the first completion releases path->done, allowing ipoib_flush_paths() to free the path, and thus corrupting it for the second completion. Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM change events") added the field path->valid and changed the test "if (!path)" to "if (!path || !path->valid)". This change made it possible for a path with an outstanding query to pass the test and issue another query on the same path. Having two queries on the same path leads to a crash. This fixes . Signed-off-by: Yossi Etigin Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 0b2f601e8ca..85257f6b957 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -664,7 +664,7 @@ static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev, skb_push(skb, sizeof *phdr); __skb_queue_tail(&path->queue, skb); - if (path_rec_start(dev, path)) { + if (!path->query && path_rec_start(dev, path)) { spin_unlock_irqrestore(&priv->lock, flags); path_free(dev, path); return; -- cgit v1.2.3-70-g09d2 From 1c1271850494f06b63ae6b485e2e1b9c27ffb2d1 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Wed, 12 Nov 2008 01:24:41 +0100 Subject: parisc: fix find_extend_vma() breakage The STACK_GROWSUP case of stack expansion was missing a test for 'prev', which got removed by commit cb8f488c33539f096580e202f5438a809195008f ("mmap.c: deinline a few functions") by mistake. I found my original email in "sent" folder. The patch in that mail does NOT remove !prev. That change had beed added by someone else. Ok, I think we are not much interested in who did it, let's fix it for good. [ "It looks like this was caused by me fixing rejects. That was the fancy include-lots-of-context-so-it-wont-apply patch." - akpm ] Reported-and-bisected-by: Helge Deller Signed-off-by: Denys Vlasenko Cc: Andrew Morton Cc: Jiri Kosina Signed-off-by: Linus Torvalds --- mm/mmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/mmap.c b/mm/mmap.c index de14ac21e5b..d4855a682ab 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1704,7 +1704,7 @@ find_extend_vma(struct mm_struct *mm, unsigned long addr) vma = find_vma_prev(mm, addr, &prev); if (vma && (vma->vm_start <= addr)) return vma; - if (expand_stack(prev, addr)) + if (!prev || expand_stack(prev, addr)) return NULL; if (prev->vm_flags & VM_LOCKED) { if (mlock_vma_pages_range(prev, addr, prev->vm_end) < 0) -- cgit v1.2.3-70-g09d2 From 31ea24bba77a16d3220b0822838785cbafb78175 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:34:59 +0000 Subject: MN10300: Clean up the misalignment handler a little Clean up the MN10300 misalignment handler a little by: (1) Use ilog2() rather than doing implementing log2() locally. (2) Make format_tbl[] const and static. (3) Making the debugging prints more consistent. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 27 +++++++++------------------ 1 file changed, 9 insertions(+), 18 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 32aa89dc384..416c43baaa2 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -37,7 +37,7 @@ #include #if 0 -#define kdebug(FMT, ...) printk(KERN_DEBUG FMT, ##__VA_ARGS__) +#define kdebug(FMT, ...) printk(KERN_DEBUG "MISALIGN: "FMT"\n", ##__VA_ARGS__) #else #define kdebug(FMT, ...) do {} while (0) #endif @@ -50,14 +50,6 @@ static int misalignment_reg(unsigned long *registers, unsigned params, unsigned opcode, unsigned disp, unsigned long **_register); -static inline unsigned int_log2(unsigned x) -{ - unsigned y; - asm("bsch %1,%0" : "=r"(y) : "r"(x), "0"(0)); - return y; -} -#define log2(x) int_log2(x) - static const unsigned Dreg_index[] = { REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2 }; @@ -88,7 +80,7 @@ enum format_id { FMT_D9, }; -struct { +static const struct { u_int8_t opsz, dispsz; } format_tbl[16] = { [FMT_S0] = { 8, 0 }, @@ -273,7 +265,7 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) void *address; unsigned tmp, npop; - kdebug("MISALIGN at %lx\n", regs->pc); + kdebug("==>misalignment({pc=%lx})", regs->pc); if (in_interrupt()) die("Misalignment trap in interrupt context", regs, code); @@ -295,7 +287,7 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) noc = 8; for (pop = mn10300_opcodes; pop->name; pop++) { - npop = log2(pop->opcode | pop->opmask); + npop = ilog2(pop->opcode | pop->opmask); if (npop <= 0 || npop > 31) continue; npop = (npop + 8) & ~7; @@ -391,7 +383,7 @@ transfer_failed: /* we matched the opcode */ found_opcode: - kdebug("MISALIGN: %lx: %x==%x { %x, %x }\n", + kdebug("%lx: %x==%x { %x, %x }", regs->pc, opcode, pop->opcode, pop->params[0], pop->params[1]); tmp = format_tbl[pop->format].opsz; @@ -442,13 +434,13 @@ found_opcode: goto bad_reg_mode; if (strcmp(pop->name, "mov") == 0) { - kdebug("FIXUP: mov (%p),DARn\n", address); + kdebug("mov (%p),DARn", address); if (copy_from_user(&data, (void *) address, 4) != 0) goto transfer_failed; if (pop->params[0] & 0x1000000) *postinc += 4; } else if (strcmp(pop->name, "movhu") == 0) { - kdebug("FIXUP: movhu (%p),DARn\n", address); + kdebug("movhu (%p),DARn", address); data = 0; if (copy_from_user(&data, (void *) address, 2) != 0) goto transfer_failed; @@ -472,14 +464,13 @@ found_opcode: data = *store; if (strcmp(pop->name, "mov") == 0) { - kdebug("FIXUP: mov %lx,(%p)\n", data, address); + kdebug("mov %lx,(%p)", data, address); if (copy_to_user((void *) address, &data, 4) != 0) goto transfer_failed; if (pop->params[1] & 0x1000000) *postinc += 4; } else if (strcmp(pop->name, "movhu") == 0) { - kdebug("FIXUP: movhu %hx,(%p)\n", - (uint16_t) data, address); + kdebug("movhu %hx,(%p)", (uint16_t) data, address); if (copy_to_user((void *) address, &data, 2) != 0) goto transfer_failed; if (pop->params[1] & 0x1000000) -- cgit v1.2.3-70-g09d2 From 9f55588968095306d52bd30564666d4fadce5e39 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:04 +0000 Subject: MN10300: Add built-in testing for misalignment handler Add configurable built-in testing for the MN10300 misalignment handler. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/Kconfig.debug | 9 +++ arch/mn10300/mm/misalignment.c | 161 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 170 insertions(+) diff --git a/arch/mn10300/Kconfig.debug b/arch/mn10300/Kconfig.debug index 524e33819f3..ff80e86b9bd 100644 --- a/arch/mn10300/Kconfig.debug +++ b/arch/mn10300/Kconfig.debug @@ -15,6 +15,15 @@ config DEBUG_DECOMPRESS_KERNEL decompressing Linux seeing "Uncompressing Linux... " and "Ok, booting the kernel.\n" on console. +config TEST_MISALIGNMENT_HANDLER + bool "Run tests on the misalignment handler" + depends on DEBUG_KERNEL + default n + help + If you say Y here the kernel will execute a list of misaligned memory + accesses to make sure the misalignment handler deals them with + correctly. If it does not, the kernel will throw a BUG. + config KPROBES bool "Kprobes" depends on DEBUG_KERNEL diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 416c43baaa2..93e09c4be1d 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -650,3 +650,164 @@ static int misalignment_reg(unsigned long *registers, unsigned params, return 1; } + +/* + * misalignment handler tests + */ +#ifdef CONFIG_TEST_MISALIGNMENT_HANDLER +static u8 __initdata testbuf[512] __attribute__((aligned(16))) = { + [257] = 0x11, + [258] = 0x22, + [259] = 0x33, + [260] = 0x44, +}; + +#define ASSERTCMP(X, OP, Y) \ +do { \ + if (unlikely(!((X) OP (Y)))) { \ + printk(KERN_ERR "\n"); \ + printk(KERN_ERR "MISALIGN: Assertion failed at line %u\n", \ + __LINE__); \ + printk(KERN_ERR "0x%lx " #OP " 0x%lx is false\n", \ + (unsigned long)(X), (unsigned long)(Y)); \ + BUG(); \ + } \ +} while(0) + +static int __init test_misalignment(void) +{ + register void *r asm("e0"); + register u32 y asm("e1"); + void *p = testbuf, *q; + u32 tmp, tmp2, x; + + printk(KERN_NOTICE "==>test_misalignment() [testbuf=%p]\n", p); + p++; + + printk(KERN_NOTICE "___ MOV (Am),Dn ___\n"); + q = p + 256; + asm volatile("mov (%0),%1" : "+a"(q), "=d"(x)); + ASSERTCMP(q, ==, p + 256); + ASSERTCMP(x, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (256,Am),Dn ___\n"); + q = p; + asm volatile("mov (256,%0),%1" : "+a"(q), "=d"(x)); + ASSERTCMP(q, ==, p); + ASSERTCMP(x, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (Di,Am),Dn ___\n"); + tmp = 256; + q = p; + asm volatile("mov (%2,%0),%1" : "+a"(q), "=d"(x), "+d"(tmp)); + ASSERTCMP(q, ==, p); + ASSERTCMP(x, ==, 0x44332211); + ASSERTCMP(tmp, ==, 256); + + printk(KERN_NOTICE "___ MOV (256,Rm),Rn ___\n"); + r = p; + asm volatile("mov (256,%0),%1" : "+r"(r), "=r"(y)); + ASSERTCMP(r, ==, p); + ASSERTCMP(y, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (Rm+),Rn ___\n"); + r = p + 256; + asm volatile("mov (%0+),%1" : "+r"(r), "=r"(y)); + ASSERTCMP(r, ==, p + 256 + 4); + ASSERTCMP(y, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (Rm+,8),Rn ___\n"); + r = p + 256; + asm volatile("mov (%0+,8),%1" : "+r"(r), "=r"(y)); + ASSERTCMP(r, ==, p + 256 + 8); + ASSERTCMP(y, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (7,SP),Rn ___\n"); + asm volatile( + "add -16,sp \n" + "mov +0x11,%0 \n" + "movbu %0,(7,sp) \n" + "mov +0x22,%0 \n" + "movbu %0,(8,sp) \n" + "mov +0x33,%0 \n" + "movbu %0,(9,sp) \n" + "mov +0x44,%0 \n" + "movbu %0,(10,sp) \n" + "mov (7,sp),%1 \n" + "add +16,sp \n" + : "+a"(q), "=d"(x)); + ASSERTCMP(x, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV (259,SP),Rn ___\n"); + asm volatile( + "add -264,sp \n" + "mov +0x11,%0 \n" + "movbu %0,(259,sp) \n" + "mov +0x22,%0 \n" + "movbu %0,(260,sp) \n" + "mov +0x33,%0 \n" + "movbu %0,(261,sp) \n" + "mov +0x55,%0 \n" + "movbu %0,(262,sp) \n" + "mov (259,sp),%1 \n" + "add +264,sp \n" + : "+d"(tmp), "=d"(x)); + ASSERTCMP(x, ==, 0x55332211); + + printk(KERN_NOTICE "___ MOV (260,SP),Rn ___\n"); + asm volatile( + "add -264,sp \n" + "mov +0x11,%0 \n" + "movbu %0,(260,sp) \n" + "mov +0x22,%0 \n" + "movbu %0,(261,sp) \n" + "mov +0x33,%0 \n" + "movbu %0,(262,sp) \n" + "mov +0x55,%0 \n" + "movbu %0,(263,sp) \n" + "mov (260,sp),%1 \n" + "add +264,sp \n" + : "+d"(tmp), "=d"(x)); + ASSERTCMP(x, ==, 0x55332211); + + + printk(KERN_NOTICE "___ MOV_LNE ___\n"); + tmp = 1; + tmp2 = 2; + q = p + 256; + asm volatile( + "setlb \n" + "mov %2,%3 \n" + "mov %1,%2 \n" + "cmp +0,%1 \n" + "mov_lne (%0+,4),%1" + : "+r"(q), "+d"(tmp), "+d"(tmp2), "=d"(x) + : + : "cc"); + ASSERTCMP(q, ==, p + 256 + 12); + ASSERTCMP(x, ==, 0x44332211); + + printk(KERN_NOTICE "___ MOV in SETLB ___\n"); + tmp = 1; + tmp2 = 2; + q = p + 256; + asm volatile( + "setlb \n" + "mov %1,%3 \n" + "mov (%0+),%1 \n" + "cmp +0,%1 \n" + "lne " + : "+a"(q), "+d"(tmp), "+d"(tmp2), "=d"(x) + : + : "cc"); + + ASSERTCMP(q, ==, p + 256 + 8); + ASSERTCMP(x, ==, 0x44332211); + + printk(KERN_NOTICE "<==test_misalignment()\n"); + return 0; +} + +arch_initcall(test_misalignment); + +#endif /* CONFIG_TEST_MISALIGNMENT_HANDLER */ -- cgit v1.2.3-70-g09d2 From ee6e740cf7e5605b353af539eb9a6e17948747b6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:09 +0000 Subject: MN10300: Add further misalignment fixups Add further misalignment fixup support to the MN10300 arch, notably for ABS32 and SP+disp addressing. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 54 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 93e09c4be1d..ab03bac497c 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -120,9 +120,14 @@ enum value_id { SD24, /* 24-bit signed displacement */ SIMM4_2, /* 4-bit signed displacement in opcode bits 4-7 */ SIMM8, /* 8-bit signed immediate */ + IMM8, /* 8-bit unsigned immediate */ + IMM16, /* 16-bit unsigned immediate */ IMM24, /* 24-bit unsigned immediate */ IMM32, /* 32-bit unsigned immediate */ - IMM32_HIGH8, /* 32-bit unsigned immediate, high 8-bits in opcode */ + IMM32_HIGH8, /* 32-bit unsigned immediate, LSB in opcode */ + + IMM32_MEM, /* 32-bit unsigned displacement */ + IMM32_HIGH8_MEM, /* 32-bit unsigned displacement, LSB in opcode */ DN0 = DM0, DN1 = DM1, @@ -177,6 +182,10 @@ struct mn10300_opcode { Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ static const struct mn10300_opcode mn10300_opcodes[] = { +{ "mov", 0x4200, 0xf300, 0, FMT_S1, 0, {DM1, MEM2(IMM8, SP)}}, +{ "mov", 0x4300, 0xf300, 0, FMT_S1, 0, {AM1, MEM2(IMM8, SP)}}, +{ "mov", 0x5800, 0xfc00, 0, FMT_S1, 0, {MEM2(IMM8, SP), DN0}}, +{ "mov", 0x5c00, 0xfc00, 0, FMT_S1, 0, {MEM2(IMM8, SP), AN0}}, { "mov", 0x60, 0xf0, 0, FMT_S0, 0, {DM1, MEM(AN0)}}, { "mov", 0x70, 0xf0, 0, FMT_S0, 0, {MEM(AM0), DN1}}, { "mov", 0xf000, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), AN1}}, @@ -199,24 +208,46 @@ static const struct mn10300_opcode mn10300_opcodes[] = { { "mov", 0xfa100000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}}, { "mov", 0xfa200000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), AN1}}, { "mov", 0xfa300000, 0xfff00000, 0, FMT_D2, 0, {AM1, MEM2(SD16, AN0)}}, +{ "mov", 0xfa900000, 0xfff30000, 0, FMT_D2, 0, {AM1, MEM2(IMM16, SP)}}, +{ "mov", 0xfa910000, 0xfff30000, 0, FMT_D2, 0, {DM1, MEM2(IMM16, SP)}}, +{ "mov", 0xfab00000, 0xfffc0000, 0, FMT_D2, 0, {MEM2(IMM16, SP), AN0}}, +{ "mov", 0xfab40000, 0xfffc0000, 0, FMT_D2, 0, {MEM2(IMM16, SP), DN0}}, { "mov", 0xfb0a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}}, { "mov", 0xfb1a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}}, { "mov", 0xfb6a0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}}, { "mov", 0xfb7a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}}, +{ "mov", 0xfb8a0000, 0xffff0f00, 0, FMT_D7, AM33, {MEM2(IMM8, SP), RN2}}, { "mov", 0xfb8e0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}}, +{ "mov", 0xfb9a0000, 0xffff0f00, 0, FMT_D7, AM33, {RM2, MEM2(IMM8, SP)}}, { "mov", 0xfb9e0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}}, { "mov", 0xfc000000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}}, { "mov", 0xfc100000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}}, { "mov", 0xfc200000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), AN1}}, { "mov", 0xfc300000, 0xfff00000, 0, FMT_D4, 0, {AM1, MEM2(IMM32,AN0)}}, +{ "mov", 0xfc800000, 0xfff30000, 0, FMT_D4, 0, {AM1, MEM(IMM32_MEM)}}, +{ "mov", 0xfc810000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM(IMM32_MEM)}}, +{ "mov", 0xfc900000, 0xfff30000, 0, FMT_D4, 0, {AM1, MEM2(IMM32, SP)}}, +{ "mov", 0xfc910000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM2(IMM32, SP)}}, +{ "mov", 0xfca00000, 0xfffc0000, 0, FMT_D4, 0, {MEM(IMM32_MEM), AN0}}, +{ "mov", 0xfca40000, 0xfffc0000, 0, FMT_D4, 0, {MEM(IMM32_MEM), DN0}}, +{ "mov", 0xfcb00000, 0xfffc0000, 0, FMT_D4, 0, {MEM2(IMM32, SP), AN0}}, +{ "mov", 0xfcb40000, 0xfffc0000, 0, FMT_D4, 0, {MEM2(IMM32, SP), DN0}}, { "mov", 0xfd0a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}}, { "mov", 0xfd1a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}}, { "mov", 0xfd6a0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}}, { "mov", 0xfd7a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}}, +{ "mov", 0xfd8a0000, 0xffff0f00, 0, FMT_D8, AM33, {MEM2(IMM24, SP), RN2}}, +{ "mov", 0xfd9a0000, 0xffff0f00, 0, FMT_D8, AM33, {RM2, MEM2(IMM24, SP)}}, +{ "mov", 0xfe0a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}}, { "mov", 0xfe0a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}}, +{ "mov", 0xfe0e0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM(IMM32_HIGH8_MEM), RN2}}, { "mov", 0xfe1a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}}, +{ "mov", 0xfe1a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}}, +{ "mov", 0xfe1e0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM(IMM32_HIGH8_MEM)}}, { "mov", 0xfe6a0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}}, { "mov", 0xfe7a0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}}, +{ "mov", 0xfe8a0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8, SP), RN2}}, +{ "mov", 0xfe9a0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, SP)}}, { "movhu", 0xf060, 0xfff0, 0, FMT_D0, 0, {MEM(AM0), DN1}}, { "movhu", 0xf070, 0xfff0, 0, FMT_D0, 0, {DM1, MEM(AN0)}}, @@ -224,26 +255,42 @@ static const struct mn10300_opcode mn10300_opcodes[] = { { "movhu", 0xf4c0, 0xffc0, 0, FMT_D0, 0, {DM2, MEM2(DI, AN0)}}, { "movhu", 0xf86000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8, AM0), DN1}}, { "movhu", 0xf87000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}}, +{ "movhu", 0xf89300, 0xfff300, 0, FMT_D1, 0, {DM1, MEM2(IMM8, SP)}}, +{ "movhu", 0xf8bc00, 0xfffc00, 0, FMT_D1, 0, {MEM2(IMM8, SP), DN0}}, { "movhu", 0xf94a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}}, { "movhu", 0xf95a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}}, { "movhu", 0xf9ea00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}}, { "movhu", 0xf9fa00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEMINC(RN0)}}, { "movhu", 0xfa600000, 0xfff00000, 0, FMT_D2, 0, {MEM2(SD16, AM0), DN1}}, { "movhu", 0xfa700000, 0xfff00000, 0, FMT_D2, 0, {DM1, MEM2(SD16, AN0)}}, +{ "movhu", 0xfa930000, 0xfff30000, 0, FMT_D2, 0, {DM1, MEM2(IMM16, SP)}}, +{ "movhu", 0xfabc0000, 0xfffc0000, 0, FMT_D2, 0, {MEM2(IMM16, SP), DN0}}, { "movhu", 0xfb4a0000, 0xffff0000, 0, FMT_D7, AM33, {MEM2(SD8, RM0), RN2}}, { "movhu", 0xfb5a0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEM2(SD8, RN0)}}, +{ "movhu", 0xfbca0000, 0xffff0f00, 0, FMT_D7, AM33, {MEM2(IMM8, SP), RN2}}, { "movhu", 0xfbce0000, 0xffff000f, 0, FMT_D7, AM33, {MEM2(RI, RM0), RD2}}, +{ "movhu", 0xfbda0000, 0xffff0f00, 0, FMT_D7, AM33, {RM2, MEM2(IMM8, SP)}}, { "movhu", 0xfbde0000, 0xffff000f, 0, FMT_D7, AM33, {RD2, MEM2(RI, RN0)}}, { "movhu", 0xfbea0000, 0xffff0000, 0x22, FMT_D7, AM33, {MEMINC2 (RM0, SIMM8), RN2}}, { "movhu", 0xfbfa0000, 0xffff0000, 0, FMT_D7, AM33, {RM2, MEMINC2 (RN0, SIMM8)}}, { "movhu", 0xfc600000, 0xfff00000, 0, FMT_D4, 0, {MEM2(IMM32,AM0), DN1}}, { "movhu", 0xfc700000, 0xfff00000, 0, FMT_D4, 0, {DM1, MEM2(IMM32,AN0)}}, +{ "movhu", 0xfc830000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM(IMM32_MEM)}}, +{ "movhu", 0xfc930000, 0xfff30000, 0, FMT_D4, 0, {DM1, MEM2(IMM32, SP)}}, +{ "movhu", 0xfcac0000, 0xfffc0000, 0, FMT_D4, 0, {MEM(IMM32_MEM), DN0}}, +{ "movhu", 0xfcbc0000, 0xfffc0000, 0, FMT_D4, 0, {MEM2(IMM32, SP), DN0}}, { "movhu", 0xfd4a0000, 0xffff0000, 0, FMT_D8, AM33, {MEM2(SD24, RM0), RN2}}, { "movhu", 0xfd5a0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEM2(SD24, RN0)}}, +{ "movhu", 0xfdca0000, 0xffff0f00, 0, FMT_D8, AM33, {MEM2(IMM24, SP), RN2}}, +{ "movhu", 0xfdda0000, 0xffff0f00, 0, FMT_D8, AM33, {RM2, MEM2(IMM24, SP)}}, { "movhu", 0xfdea0000, 0xffff0000, 0x22, FMT_D8, AM33, {MEMINC2 (RM0, IMM24), RN2}}, { "movhu", 0xfdfa0000, 0xffff0000, 0, FMT_D8, AM33, {RM2, MEMINC2 (RN0, IMM24)}}, { "movhu", 0xfe4a0000, 0xffff0000, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8,RM0), RN2}}, +{ "movhu", 0xfe4e0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM(IMM32_HIGH8_MEM), RN2}}, { "movhu", 0xfe5a0000, 0xffff0000, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, RN0)}}, +{ "movhu", 0xfe5e0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM(IMM32_HIGH8_MEM)}}, +{ "movhu", 0xfeca0000, 0xffff0f00, 0, FMT_D9, AM33, {MEM2(IMM32_HIGH8, SP), RN2}}, +{ "movhu", 0xfeda0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, SP)}}, { "movhu", 0xfeea0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}}, { "movhu", 0xfefa0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}}, { 0, 0, 0, 0, 0, 0, {0}}, @@ -552,6 +599,9 @@ static int misalignment_addr(unsigned long *registers, unsigned params, postinc = ®isters[Rreg_index[disp >> 4 & 0x0f]]; address += *postinc; break; + case SP: + address += registers[REG_SP >> 2]; + break; case SD8: case SIMM8: @@ -575,7 +625,9 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += disp & 0x00ffffff; break; case IMM32: + case IMM32_MEM: case IMM32_HIGH8: + case IMM32_HIGH8_MEM: address += disp; break; default: -- cgit v1.2.3-70-g09d2 From b308bf3be1f75207c307eea9ada90e0b76194911 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:14 +0000 Subject: MN10300: Extract the displacement from an insn correctly in misalignment fixup Extract the displacement from an MN10300 instruction correctly in the misalignment fixup handler. The code should extract the displacement in LSB order, not MSB order. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index ab03bac497c..614c32b6325 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -43,11 +43,11 @@ #endif static int misalignment_addr(unsigned long *registers, unsigned params, - unsigned opcode, unsigned disp, + unsigned opcode, unsigned long disp, void **_address, unsigned long **_postinc); static int misalignment_reg(unsigned long *registers, unsigned params, - unsigned opcode, unsigned disp, + unsigned opcode, unsigned long disp, unsigned long **_register); static const unsigned Dreg_index[] = { @@ -304,13 +304,13 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) const struct exception_table_entry *fixup; const struct mn10300_opcode *pop; unsigned long *registers = (unsigned long *) regs; - unsigned long data, *store, *postinc; + unsigned long data, *store, *postinc, disp; mm_segment_t seg; siginfo_t info; - uint32_t opcode, disp, noc, xo, xm; + uint32_t opcode, noc, xo, xm; uint8_t *pc, byte; void *address; - unsigned tmp, npop; + unsigned tmp, npop, dispsz, loop; kdebug("==>misalignment({pc=%lx})", regs->pc); @@ -445,17 +445,17 @@ found_opcode: /* grab the extra displacement (note it's LSB first) */ disp = 0; - tmp = format_tbl[pop->format].dispsz >> 3; - while (tmp > 0) { - tmp--; - disp <<= 8; - + dispsz = format_tbl[pop->format].dispsz; + for (loop = 0; loop < dispsz; loop += 8) { pc++; if (__get_user(byte, pc) != 0) goto fetch_error; - disp |= byte; + disp |= byte << loop; + kdebug("{%p} disp[%02x]=%02x", pc, loop, byte); } + kdebug("disp=%lx", disp); + set_fs(KERNEL_XDS); if (fixup || regs->epsw & EPSW_nSL) set_fs(seg); @@ -538,7 +538,7 @@ found_opcode: * determine the address that was being accessed */ static int misalignment_addr(unsigned long *registers, unsigned params, - unsigned opcode, unsigned disp, + unsigned opcode, unsigned long disp, void **_address, unsigned long **_postinc) { unsigned long *postinc = NULL, address = 0, tmp; @@ -644,7 +644,7 @@ static int misalignment_addr(unsigned long *registers, unsigned params, * determine the register that is acting as source/dest */ static int misalignment_reg(unsigned long *registers, unsigned params, - unsigned opcode, unsigned disp, + unsigned opcode, unsigned long disp, unsigned long **_register) { params &= 0x7fffffff; -- cgit v1.2.3-70-g09d2 From f911c685d65ea1855eb3f95b8eaf871e5d9342fa Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:20 +0000 Subject: MN10300: Fix register-postinc addressing misalignment handling Fix misalignment handling of operands with register postincrement addressing. The flag to indicate that postincrement is required should not be interpreted as an specification of a value to be added to the address. Also add BUGs to catch unimplemented parameter markings in the opcodes table. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 614c32b6325..066ddc625a1 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -543,7 +543,7 @@ static int misalignment_addr(unsigned long *registers, unsigned params, { unsigned long *postinc = NULL, address = 0, tmp; - params &= 0x7fffffff; + params &= 0x00ffffff; do { switch (params & 0xff) { @@ -631,6 +631,7 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += disp; break; default: + BUG(); return 0; } } while ((params >>= 8)); @@ -697,6 +698,7 @@ static int misalignment_reg(unsigned long *registers, unsigned params, break; default: + BUG(); return 0; } -- cgit v1.2.3-70-g09d2 From aefefbbec1ad25bafa97a7a1db25313ce26563e2 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:25 +0000 Subject: MN10300: Allow misalignment fixup in interrupt handling Allow misalignment fixup in interrupt handling in the MN10300 arch. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 066ddc625a1..05a3c2f8d2d 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -314,9 +314,6 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) kdebug("==>misalignment({pc=%lx})", regs->pc); - if (in_interrupt()) - die("Misalignment trap in interrupt context", regs, code); - if (regs->epsw & EPSW_IE) asm volatile("or %0,epsw" : : "i"(EPSW_IE)); -- cgit v1.2.3-70-g09d2 From ddb6d05cbaea76eddbee52585152ab801a8aedc7 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:30 +0000 Subject: MN10300: Perform misalignment fixups of MOV_Lcc Perform misalignment fixups of the MOV_Lcc instructions (move postinc memory to register and conditionally loop). Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 95 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 94 insertions(+), 1 deletion(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 05a3c2f8d2d..d5b45bb7d10 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -50,6 +50,8 @@ static int misalignment_reg(unsigned long *registers, unsigned params, unsigned opcode, unsigned long disp, unsigned long **_register); +static void misalignment_MOV_Lcc(struct pt_regs *regs, uint32_t opcode); + static const unsigned Dreg_index[] = { REG_D0 >> 2, REG_D1 >> 2, REG_D2 >> 2, REG_D3 >> 2 }; @@ -78,6 +80,7 @@ enum format_id { FMT_D7, FMT_D8, FMT_D9, + FMT_D10, }; static const struct { @@ -95,6 +98,7 @@ static const struct { [FMT_D7] = { 24, 8 }, [FMT_D8] = { 24, 24 }, [FMT_D9] = { 24, 32 }, + [FMT_D10] = { 32, 0 }, }; enum value_id { @@ -293,6 +297,19 @@ static const struct mn10300_opcode mn10300_opcodes[] = { { "movhu", 0xfeda0000, 0xffff0f00, 0, FMT_D9, AM33, {RM2, MEM2(IMM32_HIGH8, SP)}}, { "movhu", 0xfeea0000, 0xffff0000, 0x22, FMT_D9, AM33, {MEMINC2 (RM0, IMM32_HIGH8), RN2}}, { "movhu", 0xfefa0000, 0xffff0000, 0, FMT_D9, AM33, {RN2, MEMINC2 (RM0, IMM32_HIGH8)}}, + +{ "mov_llt", 0xf7e00000, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lgt", 0xf7e00001, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lge", 0xf7e00002, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lle", 0xf7e00003, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lcs", 0xf7e00004, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lhi", 0xf7e00005, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lcc", 0xf7e00006, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lls", 0xf7e00007, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_leq", 0xf7e00008, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lne", 0xf7e00009, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, +{ "mov_lra", 0xf7e0000a, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, + { 0, 0, 0, 0, 0, 0, {0}}, }; @@ -477,7 +494,8 @@ found_opcode: &store)) goto bad_reg_mode; - if (strcmp(pop->name, "mov") == 0) { + if (strcmp(pop->name, "mov") == 0 || + memcmp(pop->name, "mov_l", 5) == 0) { kdebug("mov (%p),DARn", address); if (copy_from_user(&data, (void *) address, 4) != 0) goto transfer_failed; @@ -495,6 +513,7 @@ found_opcode: } *store = data; + kdebug("loaded %lx", data); } else { /* move register to memory */ if (!misalignment_reg(registers, pop->params[0], opcode, disp, @@ -527,6 +546,11 @@ found_opcode: tmp = format_tbl[pop->format].opsz + format_tbl[pop->format].dispsz; regs->pc += tmp >> 3; + /* handle MOV_Lcc, which are currently the only FMT_D10 insns that + * access memory */ + if (pop->format == FMT_D10) + misalignment_MOV_Lcc(regs, opcode); + set_fs(seg); return; } @@ -702,6 +726,75 @@ static int misalignment_reg(unsigned long *registers, unsigned params, return 1; } +/* + * handle the conditional loop part of the move-and-loop instructions + */ +static void misalignment_MOV_Lcc(struct pt_regs *regs, uint32_t opcode) +{ + unsigned long epsw = regs->epsw; + unsigned long NxorV; + + kdebug("MOV_Lcc %x [flags=%lx]", opcode, epsw & 0xf); + + /* calculate N^V and shift onto the same bit position as Z */ + NxorV = ((epsw >> 3) ^ epsw >> 1) & 1; + + switch (opcode & 0xf) { + case 0x0: /* MOV_LLT: N^V */ + if (NxorV) + goto take_the_loop; + return; + case 0x1: /* MOV_LGT: ~(Z or (N^V))*/ + if (!((epsw & EPSW_FLAG_Z) | NxorV)) + goto take_the_loop; + return; + case 0x2: /* MOV_LGE: ~(N^V) */ + if (!NxorV) + goto take_the_loop; + return; + case 0x3: /* MOV_LLE: Z or (N^V) */ + if ((epsw & EPSW_FLAG_Z) | NxorV) + goto take_the_loop; + return; + + case 0x4: /* MOV_LCS: C */ + if (epsw & EPSW_FLAG_C) + goto take_the_loop; + return; + case 0x5: /* MOV_LHI: ~(C or Z) */ + if (!(epsw & (EPSW_FLAG_C | EPSW_FLAG_Z))) + goto take_the_loop; + return; + case 0x6: /* MOV_LCC: ~C */ + if (!(epsw & EPSW_FLAG_C)) + goto take_the_loop; + return; + case 0x7: /* MOV_LLS: C or Z */ + if (epsw & (EPSW_FLAG_C | EPSW_FLAG_Z)) + goto take_the_loop; + return; + + case 0x8: /* MOV_LEQ: Z */ + if (epsw & EPSW_FLAG_Z) + goto take_the_loop; + return; + case 0x9: /* MOV_LNE: ~Z */ + if (!(epsw & EPSW_FLAG_Z)) + goto take_the_loop; + return; + case 0xa: /* MOV_LRA: always */ + goto take_the_loop; + + default: + BUG(); + } + +take_the_loop: + /* wind the PC back to just after the SETLB insn */ + kdebug("loop LAR=%lx", regs->lar); + regs->pc = regs->lar - 4; +} + /* * misalignment handler tests */ -- cgit v1.2.3-70-g09d2 From 6d615c78fb92fbd80e52ba7acb2d4c4d503006c3 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:35 +0000 Subject: MN10300: Handle misaligned postinc-with-imm addressing mode correctly Correctly handle misalignment in MOV instructions with postinc-with-immediate addressing mode operands. In these, the immediate value is the increment to be applied the address register, not the displacement to the address. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 107 +++++++++++++++++++++-------------------- 1 file changed, 56 insertions(+), 51 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index d5b45bb7d10..61e65ec47db 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -44,7 +44,8 @@ static int misalignment_addr(unsigned long *registers, unsigned params, unsigned opcode, unsigned long disp, - void **_address, unsigned long **_postinc); + void **_address, unsigned long **_postinc, + unsigned long *_inc); static int misalignment_reg(unsigned long *registers, unsigned params, unsigned opcode, unsigned long disp, @@ -150,7 +151,7 @@ enum value_id { }; struct mn10300_opcode { - const char *name; + const char name[8]; u_int32_t opcode; u_int32_t opmask; unsigned exclusion; @@ -310,7 +311,7 @@ static const struct mn10300_opcode mn10300_opcodes[] = { { "mov_lne", 0xf7e00009, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, { "mov_lra", 0xf7e0000a, 0xffff000f, 0x22, FMT_D10, AM33, {MEMINC2 (RN4,SIMM4_2), RM6}}, -{ 0, 0, 0, 0, 0, 0, {0}}, +{ "", 0, 0, 0, 0, 0, {0}}, }; /* @@ -321,11 +322,11 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) const struct exception_table_entry *fixup; const struct mn10300_opcode *pop; unsigned long *registers = (unsigned long *) regs; - unsigned long data, *store, *postinc, disp; + unsigned long data, *store, *postinc, disp, inc; mm_segment_t seg; siginfo_t info; uint32_t opcode, noc, xo, xm; - uint8_t *pc, byte; + uint8_t *pc, byte, datasz; void *address; unsigned tmp, npop, dispsz, loop; @@ -347,7 +348,7 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) opcode = byte; noc = 8; - for (pop = mn10300_opcodes; pop->name; pop++) { + for (pop = mn10300_opcodes; pop->name[0]; pop++) { npop = ilog2(pop->opcode | pop->opmask); if (npop <= 0 || npop > 31) continue; @@ -484,32 +485,31 @@ found_opcode: goto failed; } + /* determine the data transfer size of the move */ + if (pop->name[3] == 0 || /* "mov" */ + pop->name[4] == 'l') /* mov_lcc */ + inc = datasz = 4; + else if (pop->name[3] == 'h') /* movhu */ + inc = datasz = 2; + else + goto unsupported_instruction; + if (pop->params[0] & 0x80000000) { /* move memory to register */ if (!misalignment_addr(registers, pop->params[0], opcode, disp, - &address, &postinc)) + &address, &postinc, &inc)) goto bad_addr_mode; if (!misalignment_reg(registers, pop->params[1], opcode, disp, &store)) goto bad_reg_mode; - if (strcmp(pop->name, "mov") == 0 || - memcmp(pop->name, "mov_l", 5) == 0) { - kdebug("mov (%p),DARn", address); - if (copy_from_user(&data, (void *) address, 4) != 0) - goto transfer_failed; - if (pop->params[0] & 0x1000000) - *postinc += 4; - } else if (strcmp(pop->name, "movhu") == 0) { - kdebug("movhu (%p),DARn", address); - data = 0; - if (copy_from_user(&data, (void *) address, 2) != 0) - goto transfer_failed; - if (pop->params[0] & 0x1000000) - *postinc += 2; - } else { - goto unsupported_instruction; + kdebug("mov%u (%p),DARn", datasz, address); + if (copy_from_user(&data, (void *) address, datasz) != 0) + goto transfer_failed; + if (pop->params[0] & 0x1000000) { + kdebug("inc=%lx", inc); + *postinc += inc; } *store = data; @@ -521,26 +521,16 @@ found_opcode: goto bad_reg_mode; if (!misalignment_addr(registers, pop->params[1], opcode, disp, - &address, &postinc)) + &address, &postinc, &inc)) goto bad_addr_mode; data = *store; - if (strcmp(pop->name, "mov") == 0) { - kdebug("mov %lx,(%p)", data, address); - if (copy_to_user((void *) address, &data, 4) != 0) - goto transfer_failed; - if (pop->params[1] & 0x1000000) - *postinc += 4; - } else if (strcmp(pop->name, "movhu") == 0) { - kdebug("movhu %hx,(%p)", (uint16_t) data, address); - if (copy_to_user((void *) address, &data, 2) != 0) - goto transfer_failed; - if (pop->params[1] & 0x1000000) - *postinc += 2; - } else { - goto unsupported_instruction; - } + kdebug("mov%u %lx,(%p)", datasz, data, address); + if (copy_to_user((void *) address, &data, datasz) != 0) + goto transfer_failed; + if (pop->params[1] & 0x1000000) + *postinc += inc; } tmp = format_tbl[pop->format].opsz + format_tbl[pop->format].dispsz; @@ -560,10 +550,17 @@ found_opcode: */ static int misalignment_addr(unsigned long *registers, unsigned params, unsigned opcode, unsigned long disp, - void **_address, unsigned long **_postinc) + void **_address, unsigned long **_postinc, + unsigned long *_inc) { unsigned long *postinc = NULL, address = 0, tmp; + if (!(params & 0x1000000)) { + kdebug("noinc"); + *_inc = 0; + _inc = NULL; + } + params &= 0x00ffffff; do { @@ -624,32 +621,40 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += registers[REG_SP >> 2]; break; + /* displacements are either to be added to the address + * before use, or, in the case of post-inc addressing, + * to be added into the base register after use */ case SD8: case SIMM8: - address += (int32_t) (int8_t) (disp & 0xff); - break; + disp = (long) (int8_t) (disp & 0xff); + goto displace_or_inc; case SD16: - address += (int32_t) (int16_t) (disp & 0xffff); - break; + disp = (long) (int16_t) (disp & 0xffff); + goto displace_or_inc; case SD24: tmp = disp << 8; asm("asr 8,%0" : "=r"(tmp) : "0"(tmp)); - address += tmp; - break; + disp = (long) tmp; + goto displace_or_inc; case SIMM4_2: tmp = opcode >> 4 & 0x0f; tmp <<= 28; asm("asr 28,%0" : "=r"(tmp) : "0"(tmp)); - address += tmp; - break; + disp = (long) tmp; + goto displace_or_inc; case IMM24: - address += disp & 0x00ffffff; - break; + disp &= 0x00ffffff; + goto displace_or_inc; case IMM32: case IMM32_MEM: case IMM32_HIGH8: case IMM32_HIGH8_MEM: - address += disp; + displace_or_inc: + kdebug("%s %lx", _inc ? "incr" : "disp", disp); + if (!_inc) + address += disp; + else + *_inc = disp; break; default: BUG(); -- cgit v1.2.3-70-g09d2 From 852c15b7362cf34e0d7949abefbfeeb0845d93b4 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:40 +0000 Subject: MN10300: Fix misaligned index-register addressing handling Fix misalignment handling for an address calculated from the sum of two registers. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 61e65ec47db..a59836804bc 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -570,11 +570,11 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += *postinc; break; case DM1: - postinc = ®isters[Dreg_index[opcode >> 2 & 0x0c]]; + postinc = ®isters[Dreg_index[opcode >> 2 & 0x03]]; address += *postinc; break; case DM2: - postinc = ®isters[Dreg_index[opcode >> 4 & 0x30]]; + postinc = ®isters[Dreg_index[opcode >> 4 & 0x03]]; address += *postinc; break; case AM0: @@ -582,11 +582,11 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += *postinc; break; case AM1: - postinc = ®isters[Areg_index[opcode >> 2 & 0x0c]]; + postinc = ®isters[Areg_index[opcode >> 2 & 0x03]]; address += *postinc; break; case AM2: - postinc = ®isters[Areg_index[opcode >> 4 & 0x30]]; + postinc = ®isters[Areg_index[opcode >> 4 & 0x03]]; address += *postinc; break; case RM0: -- cgit v1.2.3-70-g09d2 From d3bd462865421dd8be310fac2d2f6da6069f9679 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:45 +0000 Subject: MN10300: Handle misaligned SP-based operands Support misalignment handling for instructions that have kernel SP-based address operands, including fixing those that include IMM8 or IMM16 displacements. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 33 ++++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index a59836804bc..e247a6e1b8d 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -42,8 +42,9 @@ #define kdebug(FMT, ...) do {} while (0) #endif -static int misalignment_addr(unsigned long *registers, unsigned params, - unsigned opcode, unsigned long disp, +static int misalignment_addr(unsigned long *registers, unsigned long sp, + unsigned params, unsigned opcode, + unsigned long disp, void **_address, unsigned long **_postinc, unsigned long *_inc); @@ -322,7 +323,7 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) const struct exception_table_entry *fixup; const struct mn10300_opcode *pop; unsigned long *registers = (unsigned long *) regs; - unsigned long data, *store, *postinc, disp, inc; + unsigned long data, *store, *postinc, disp, inc, sp; mm_segment_t seg; siginfo_t info; uint32_t opcode, noc, xo, xm; @@ -330,7 +331,12 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) void *address; unsigned tmp, npop, dispsz, loop; - kdebug("==>misalignment({pc=%lx})", regs->pc); + if (user_mode(regs)) + sp = regs->sp; + else + sp = (unsigned long) regs + sizeof(*regs); + + kdebug("==>misalignment({pc=%lx,sp=%lx})", regs->pc, sp); if (regs->epsw & EPSW_IE) asm volatile("or %0,epsw" : : "i"(EPSW_IE)); @@ -496,7 +502,8 @@ found_opcode: if (pop->params[0] & 0x80000000) { /* move memory to register */ - if (!misalignment_addr(registers, pop->params[0], opcode, disp, + if (!misalignment_addr(registers, sp, + pop->params[0], opcode, disp, &address, &postinc, &inc)) goto bad_addr_mode; @@ -520,7 +527,8 @@ found_opcode: &store)) goto bad_reg_mode; - if (!misalignment_addr(registers, pop->params[1], opcode, disp, + if (!misalignment_addr(registers, sp, + pop->params[1], opcode, disp, &address, &postinc, &inc)) goto bad_addr_mode; @@ -548,8 +556,9 @@ found_opcode: /* * determine the address that was being accessed */ -static int misalignment_addr(unsigned long *registers, unsigned params, - unsigned opcode, unsigned long disp, +static int misalignment_addr(unsigned long *registers, unsigned long sp, + unsigned params, unsigned opcode, + unsigned long disp, void **_address, unsigned long **_postinc, unsigned long *_inc) { @@ -618,7 +627,7 @@ static int misalignment_addr(unsigned long *registers, unsigned params, address += *postinc; break; case SP: - address += registers[REG_SP >> 2]; + address += sp; break; /* displacements are either to be added to the address @@ -642,6 +651,12 @@ static int misalignment_addr(unsigned long *registers, unsigned params, asm("asr 28,%0" : "=r"(tmp) : "0"(tmp)); disp = (long) tmp; goto displace_or_inc; + case IMM8: + disp &= 0x000000ff; + goto displace_or_inc; + case IMM16: + disp &= 0x0000ffff; + goto displace_or_inc; case IMM24: disp &= 0x00ffffff; goto displace_or_inc; -- cgit v1.2.3-70-g09d2 From bd9384a9fdd6c15da6b01b2844c3471d07a45d64 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:50 +0000 Subject: MN10300: Don't handle misaligned loading and storing of SP Don't handle the misaligned loading and storing of the SP register as in C code that's most certainly a compiler bug. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index e247a6e1b8d..7b670a3d765 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -204,8 +204,6 @@ static const struct mn10300_opcode mn10300_opcodes[] = { { "mov", 0xf81000, 0xfff000, 0, FMT_D1, 0, {DM1, MEM2(SD8, AN0)}}, { "mov", 0xf82000, 0xfff000, 0, FMT_D1, 0, {MEM2(SD8,AM0), AN1}}, { "mov", 0xf83000, 0xfff000, 0, FMT_D1, 0, {AM1, MEM2(SD8, AN0)}}, -{ "mov", 0xf8f000, 0xfffc00, 0, FMT_D1, AM33, {MEM2(SD8, AM0), SP}}, -{ "mov", 0xf8f400, 0xfffc00, 0, FMT_D1, AM33, {SP, MEM2(SD8, AN0)}}, { "mov", 0xf90a00, 0xffff00, 0, FMT_D6, AM33, {MEM(RM0), RN2}}, { "mov", 0xf91a00, 0xffff00, 0, FMT_D6, AM33, {RM2, MEM(RN0)}}, { "mov", 0xf96a00, 0xffff00, 0x12, FMT_D6, AM33, {MEMINC(RM0), RN2}}, -- cgit v1.2.3-70-g09d2 From 58a47481b6ecb6dd05ab4a788e1f2ae3c7c46f57 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 12 Nov 2008 15:35:55 +0000 Subject: MN10300: Don't do misalignment handling for userspace Don't do misalignment handling for userspace misalignment faults: just generate an appropriate SIGBUS instead. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/mm/misalignment.c | 52 +++++++++++++++++++----------------------- 1 file changed, 23 insertions(+), 29 deletions(-) diff --git a/arch/mn10300/mm/misalignment.c b/arch/mn10300/mm/misalignment.c index 7b670a3d765..94c4a435806 100644 --- a/arch/mn10300/mm/misalignment.c +++ b/arch/mn10300/mm/misalignment.c @@ -329,10 +329,11 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) void *address; unsigned tmp, npop, dispsz, loop; + /* we don't fix up userspace misalignment faults */ if (user_mode(regs)) - sp = regs->sp; - else - sp = (unsigned long) regs + sizeof(*regs); + goto bus_error; + + sp = (unsigned long) regs + sizeof(*regs); kdebug("==>misalignment({pc=%lx,sp=%lx})", regs->pc, sp); @@ -386,15 +387,15 @@ asmlinkage void misalignment(struct pt_regs *regs, enum exception_code code) } /* didn't manage to find a fixup */ - if (!user_mode(regs)) - printk(KERN_CRIT "MISALIGN: %lx: unsupported instruction %x\n", - regs->pc, opcode); + printk(KERN_CRIT "MISALIGN: %lx: unsupported instruction %x\n", + regs->pc, opcode); failed: set_fs(seg); if (die_if_no_fixup("misalignment error", regs, code)) return; +bus_error: info.si_signo = SIGBUS; info.si_errno = 0; info.si_code = BUS_ADRALN; @@ -404,31 +405,27 @@ failed: /* error reading opcodes */ fetch_error: - if (!user_mode(regs)) - printk(KERN_CRIT - "MISALIGN: %p: fault whilst reading instruction data\n", - pc); + printk(KERN_CRIT + "MISALIGN: %p: fault whilst reading instruction data\n", + pc); goto failed; bad_addr_mode: - if (!user_mode(regs)) - printk(KERN_CRIT - "MISALIGN: %lx: unsupported addressing mode %x\n", - regs->pc, opcode); + printk(KERN_CRIT + "MISALIGN: %lx: unsupported addressing mode %x\n", + regs->pc, opcode); goto failed; bad_reg_mode: - if (!user_mode(regs)) - printk(KERN_CRIT - "MISALIGN: %lx: unsupported register mode %x\n", - regs->pc, opcode); + printk(KERN_CRIT + "MISALIGN: %lx: unsupported register mode %x\n", + regs->pc, opcode); goto failed; unsupported_instruction: - if (!user_mode(regs)) - printk(KERN_CRIT - "MISALIGN: %lx: unsupported instruction %x (%s)\n", - regs->pc, opcode, pop->name); + printk(KERN_CRIT + "MISALIGN: %lx: unsupported instruction %x (%s)\n", + regs->pc, opcode, pop->name); goto failed; transfer_failed: @@ -476,16 +473,14 @@ found_opcode: kdebug("disp=%lx", disp); set_fs(KERNEL_XDS); - if (fixup || regs->epsw & EPSW_nSL) + if (fixup) set_fs(seg); tmp = (pop->params[0] ^ pop->params[1]) & 0x80000000; if (!tmp) { - if (!user_mode(regs)) - printk(KERN_CRIT - "MISALIGN: %lx:" - " insn not move to/from memory %x\n", - regs->pc, opcode); + printk(KERN_CRIT + "MISALIGN: %lx: insn not move to/from memory %x\n", + regs->pc, opcode); goto failed; } @@ -548,7 +543,6 @@ found_opcode: misalignment_MOV_Lcc(regs, opcode); set_fs(seg); - return; } /* -- cgit v1.2.3-70-g09d2 From 5cbd54ef470d880fc37fbe4b21eb514806d51e0d Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 12 Nov 2008 20:05:50 +0100 Subject: sched: fix init_idle()'s use of sched_clock() Maciej Rutecki reported: > I have this bug during suspend to disk: > > [ 188.592151] Enabling non-boot CPUs ... > [ 188.592151] SMP alternatives: switching to SMP code > [ 188.666058] BUG: using smp_processor_id() in preemptible > [00000000] > code: suspend_to_disk/2934 > [ 188.666064] caller is native_sched_clock+0x2b/0x80 Which, as noted by Linus, was caused by me, via: 7cbaef9c "sched: optimize sched_clock() a bit" Move the rq locking a bit earlier in the initialization sequence, that will make the sched_clock() call in init_idle() non-preemptible. Reported-by: Maciej Rutecki Signed-off-by: Ingo Molnar --- kernel/sched.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 3bafbe350f4..c94baf2969e 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5870,6 +5870,8 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu) struct rq *rq = cpu_rq(cpu); unsigned long flags; + spin_lock_irqsave(&rq->lock, flags); + __sched_fork(idle); idle->se.exec_start = sched_clock(); @@ -5877,7 +5879,6 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu) idle->cpus_allowed = cpumask_of_cpu(cpu); __set_task_cpu(idle, cpu); - spin_lock_irqsave(&rq->lock, flags); rq->curr = rq->idle = idle; #if defined(CONFIG_SMP) && defined(__ARCH_WANT_UNLOCKED_CTXSW) idle->oncpu = 1; -- cgit v1.2.3-70-g09d2 From 8f7c41d4cec91cdbfa89b4a77d5a628938875366 Mon Sep 17 00:00:00 2001 From: Ivan Kuten Date: Mon, 10 Nov 2008 19:39:25 -0600 Subject: rtl8187: Add Abocom USB ID Signed-off-by: Ivan Kuten Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8187_dev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 431e3c78bf2..0ce9fb03795 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -48,6 +48,8 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187}, /* Sitecom */ {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187}, + /* Abocom */ + {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187}, {} }; -- cgit v1.2.3-70-g09d2 From db7fb86b0ca565cf3537401612581a8158025cc2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 11 Nov 2008 11:28:04 +0100 Subject: mac80211: fix notify_mac function The ieee80211_notify_mac() function uses ieee80211_sta_req_auth() which in turn calls ieee80211_set_disassoc() which calls a few functions that need to be able to sleep, so ieee80211_notify_mac() cannot use RCU locking for the interface list and must use rtnl locking instead. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 87665d7bb4f..14d165f0df7 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2570,14 +2570,14 @@ void ieee80211_notify_mac(struct ieee80211_hw *hw, switch (notif_type) { case IEEE80211_NOTIFY_RE_ASSOC: - rcu_read_lock(); - list_for_each_entry_rcu(sdata, &local->interfaces, list) { + rtnl_lock(); + list_for_each_entry(sdata, &local->interfaces, list) { if (sdata->vif.type != NL80211_IFTYPE_STATION) continue; ieee80211_sta_req_auth(sdata, &sdata->u.sta); } - rcu_read_unlock(); + rtnl_unlock(); break; } } -- cgit v1.2.3-70-g09d2 From f3c769185a28b7947d97b3552a977102c1fac3f2 Mon Sep 17 00:00:00 2001 From: Bob Jolliffe Date: Wed, 12 Nov 2008 20:16:59 +0000 Subject: rtl8187 : support for Sitecom WL-168 0001 v4 the Sitecom 0001 v4 with product id 0x0df6:0028, uses Realtek's RTL8187B and work fine with new 2.6.27 driver. Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8187_dev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 0ce9fb03795..69eb0132593 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -48,6 +48,7 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { {USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187}, /* Sitecom */ {USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187}, + {USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B}, /* Abocom */ {USB_DEVICE(0x13d1, 0xabe6), .driver_info = DEVICE_RTL8187}, {} -- cgit v1.2.3-70-g09d2 From f7cd168645dda3e9067f24fabbfa787f9a237488 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 12 Nov 2008 16:54:22 -0500 Subject: hostap: pad the skb->cb usage in lieu of a proper fix Like mac80211 did, this driver makes 'clever' use of skb->cb to pass information along with an skb as it is requeued from the virtual device to the physical wireless device. Unfortunately, that trick no longer works... Unlike mac80211, code complexity and driver apathy makes this hack the best option we have in the short run. Hopefully someone will eventually be motivated to code a proper fix before all the effected hardware dies. (Above text by me. Johannes officially disavows all knowledge of this hack. -- JWL) Signed-off-by: Johannes Berg Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_wlan.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h index ffdf4876121..a68f97c3935 100644 --- a/drivers/net/wireless/hostap/hostap_wlan.h +++ b/drivers/net/wireless/hostap/hostap_wlan.h @@ -918,9 +918,12 @@ struct hostap_interface { /* * TX meta data - stored in skb->cb buffer, so this must not be increased over - * the 40-byte limit + * the 48-byte limit. + * THE PADDING THIS STARTS WITH IS A HORRIBLE HACK THAT SHOULD NOT LIVE + * TO SEE THE DAY. */ struct hostap_skb_tx_data { + unsigned int __padding_for_default_qdiscs; u32 magic; /* HOSTAP_SKB_TX_DATA_MAGIC */ u8 rate; /* transmit rate */ #define HOSTAP_TX_FLAGS_WDS BIT(0) -- cgit v1.2.3-70-g09d2 From e23a59e1ca6d177a57a7791b3629db93ff1d9813 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 12 Nov 2008 14:32:54 -0800 Subject: niu: Fix readq implementation when architecture does not provide one. This fixes a TX hang reported by Jesper Dangaard Brouer. When an architecutre cannot provide a fully functional 64-bit atomic readq/writeq, the driver must implement it's own. This is because only the driver can say whether doing something like using two 32-bit reads to implement the full 64-bit read will actually work properly. In particular one of the issues is whether the top 32-bits or the bottom 32-bits of the 64-bit register should be read first. There could be side effects, and in fact that is exactly the problem here. The TX_CS register has counters in the upper 32-bits and state bits in the lower 32-bits. A read clears the state bits. We would read the counter half before the state bit half. That first read would clear the state bits, and then the driver thinks that no interrupts are pending because the interrupt indication state bits are seen clear every time. Fix this by reading the bottom half before the upper half. Tested-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- drivers/net/niu.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index 9acb5d70a3a..d8463b1c3df 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -51,8 +51,7 @@ MODULE_VERSION(DRV_MODULE_VERSION); #ifndef readq static u64 readq(void __iomem *reg) { - return (((u64)readl(reg + 0x4UL) << 32) | - (u64)readl(reg)); + return ((u64) readl(reg)) | (((u64) readl(reg + 4UL)) << 32); } static void writeq(u64 val, void __iomem *reg) -- cgit v1.2.3-70-g09d2 From b2af2c1d3e4ddeea9d02c46d0df0c322cc7b7061 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 12 Nov 2008 16:23:44 -0800 Subject: bnx2: fix poll_controller to pass proper structures and check all rx queues Fix bnx2 so that netpoll works properly. Specifically: 1) Fix parameters to bnx2_interrupt to be a struct bnx2_napi rather than a struct net_device 2) Fix poll_controller method to check every queue in the rx case so frames aren't missed Signed-off-by: Neil Horman Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 430d430bce2..d07e3f14895 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -7204,10 +7204,13 @@ static void poll_bnx2(struct net_device *dev) { struct bnx2 *bp = netdev_priv(dev); + int i; - disable_irq(bp->pdev->irq); - bnx2_interrupt(bp->pdev->irq, dev); - enable_irq(bp->pdev->irq); + for (i = 0; i < bp->irq_nvecs; i++) { + disable_irq(bp->irq_tbl[i].vector); + bnx2_interrupt(bp->irq_tbl[i].vector, &bp->bnx2_napi[i]); + enable_irq(bp->irq_tbl[i].vector); + } } #endif -- cgit v1.2.3-70-g09d2 From 7526674de0c921e7f1e9b6f71a1f9d832557b554 Mon Sep 17 00:00:00 2001 From: Adam Litke Date: Wed, 12 Nov 2008 13:24:56 -0800 Subject: hugetlb: make unmap_ref_private multi-size-aware Oops. Part of the hugetlb private reservation code was not fully converted to use hstates. When a huge page must be unmapped from VMAs due to a failed COW, HPAGE_SIZE is used in the call to unmap_hugepage_range() regardless of the page size being used. This works if the VMA is using the default huge page size. Otherwise we might unmap too much, too little, or trigger a BUG_ON. Rare but serious -- fix it. Signed-off-by: Adam Litke Cc: Jon Tollefson Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index d143ab67be4..6058b53dcb8 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1796,6 +1796,7 @@ void unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start, static int unmap_ref_private(struct mm_struct *mm, struct vm_area_struct *vma, struct page *page, unsigned long address) { + struct hstate *h = hstate_vma(vma); struct vm_area_struct *iter_vma; struct address_space *mapping; struct prio_tree_iter iter; @@ -1805,7 +1806,7 @@ static int unmap_ref_private(struct mm_struct *mm, struct vm_area_struct *vma, * vm_pgoff is in PAGE_SIZE units, hence the different calculation * from page cache lookup which is in HPAGE_SIZE units. */ - address = address & huge_page_mask(hstate_vma(vma)); + address = address & huge_page_mask(h); pgoff = ((address - vma->vm_start) >> PAGE_SHIFT) + (vma->vm_pgoff >> PAGE_SHIFT); mapping = (struct address_space *)page_private(page); @@ -1824,7 +1825,7 @@ static int unmap_ref_private(struct mm_struct *mm, struct vm_area_struct *vma, */ if (!is_vma_resv_set(iter_vma, HPAGE_RESV_OWNER)) unmap_hugepage_range(iter_vma, - address, address + HPAGE_SIZE, + address, address + huge_page_size(h), page); } -- cgit v1.2.3-70-g09d2 From 468cc0320ed083e26364d9febde2679d981ed6a6 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Wed, 12 Nov 2008 13:24:58 -0800 Subject: hwmon: applesmc: add support for Macbook 4 This patch adds accelerometer and temperature sensor support for Macbook 4. Signed-off-by: Henrik Rydberg Cc: Nicolas Boichat Signed-off-by: Linus Torvalds --- drivers/hwmon/applesmc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index be3285912cb..488e45cd43d 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -1280,7 +1280,7 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 0, .light = 0, .temperature_set = 4 }, /* iMac: temperature set 5 */ { .accelerometer = 0, .light = 0, .temperature_set = 5 }, -/* MacBook3: accelerometer and temperature set 6 */ +/* MacBook3, MacBook4: accelerometer and temperature set 6 */ { .accelerometer = 1, .light = 0, .temperature_set = 6 }, /* MacBook Air: accelerometer, backlight and temperature set 7 */ { .accelerometer = 1, .light = 1, .temperature_set = 7 }, @@ -1329,6 +1329,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") }, &applesmc_dmi_data[6]}, + { applesmc_dmi_match, "Apple MacBook 4", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook4") }, + &applesmc_dmi_data[6]}, { applesmc_dmi_match, "Apple MacBook 5", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5") }, -- cgit v1.2.3-70-g09d2 From 722faccc7eb0a9b248fba3e7020b1c3770c41aef Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 12 Nov 2008 13:24:59 -0800 Subject: atmel_lcdfb: change irq_base definition to allow error reporting Changed because old the definition of unsigned long cannot be negative. Signed-off-by: Nicolas Ferre Reported-by: Roel Kluin Cc: Haavard Skinnemoen Cc: Andrew Victor Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/video/atmel_lcdc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h index 6ad87f48599..0c864db1a46 100644 --- a/include/video/atmel_lcdc.h +++ b/include/video/atmel_lcdc.h @@ -38,7 +38,7 @@ struct atmel_lcdfb_info { spinlock_t lock; struct fb_info *info; void __iomem *mmio; - unsigned long irq_base; + int irq_base; struct work_struct task; unsigned int guard_time; -- cgit v1.2.3-70-g09d2 From fe2d5ffc74a1de6a31e9fd65b65cce72d881edf7 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:25:00 -0800 Subject: Fix platform drivers that crash on suspend/resume It turns out that if one registers a struct platform_device, the platform device code expects that platform_device.device->driver points to a struct driver inside a struct platform_driver. This is not the case with the ipmi-si, ipmi-msghandler and ibmaem drivers, which causes the suspend/resume hook functions to jump off into nowhere, causing a crash. Make this assumption hold true for these three drivers. Signed-off-by: Darrick J. Wong Acked-by: Corey Minyard Cc: Jean Delvare Cc: Kay Sievers Cc: Greg KH Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_msghandler.c | 20 +++++++++++--------- drivers/char/ipmi/ipmi_si_intf.c | 16 +++++++++------- drivers/hwmon/ibmaem.c | 18 ++++++++++-------- 3 files changed, 30 insertions(+), 24 deletions(-) diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 8a59aaa21be..7a88dfd4427 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -422,9 +422,11 @@ struct ipmi_smi { /** * The driver model view of the IPMI messaging driver. */ -static struct device_driver ipmidriver = { - .name = "ipmi", - .bus = &platform_bus_type +static struct platform_driver ipmidriver = { + .driver = { + .name = "ipmi", + .bus = &platform_bus_type + } }; static DEFINE_MUTEX(ipmidriver_mutex); @@ -2384,9 +2386,9 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, * representing the interfaced BMC already */ if (bmc->guid_set) - old_bmc = ipmi_find_bmc_guid(&ipmidriver, bmc->guid); + old_bmc = ipmi_find_bmc_guid(&ipmidriver.driver, bmc->guid); else - old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver, + old_bmc = ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, bmc->id.product_id, bmc->id.device_id); @@ -2416,7 +2418,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, snprintf(name, sizeof(name), "ipmi_bmc.%4.4x", bmc->id.product_id); - while (ipmi_find_bmc_prod_dev_id(&ipmidriver, + while (ipmi_find_bmc_prod_dev_id(&ipmidriver.driver, bmc->id.product_id, bmc->id.device_id)) { if (!warn_printed) { @@ -2446,7 +2448,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, " Unable to allocate platform device\n"); return -ENOMEM; } - bmc->dev->dev.driver = &ipmidriver; + bmc->dev->dev.driver = &ipmidriver.driver; dev_set_drvdata(&bmc->dev->dev, bmc); kref_init(&bmc->refcount); @@ -4247,7 +4249,7 @@ static int ipmi_init_msghandler(void) if (initialized) return 0; - rv = driver_register(&ipmidriver); + rv = driver_register(&ipmidriver.driver); if (rv) { printk(KERN_ERR PFX "Could not register IPMI driver\n"); return rv; @@ -4308,7 +4310,7 @@ static __exit void cleanup_ipmi(void) remove_proc_entry(proc_ipmi_root->name, NULL); #endif /* CONFIG_PROC_FS */ - driver_unregister(&ipmidriver); + driver_unregister(&ipmidriver.driver); initialized = 0; diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 3123bf57ad9..3000135f2ea 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -114,9 +114,11 @@ static char *si_to_str[] = { "kcs", "smic", "bt" }; #define DEVICE_NAME "ipmi_si" -static struct device_driver ipmi_driver = { - .name = DEVICE_NAME, - .bus = &platform_bus_type +static struct platform_driver ipmi_driver = { + .driver = { + .name = DEVICE_NAME, + .bus = &platform_bus_type + } }; @@ -2868,7 +2870,7 @@ static int try_smi_init(struct smi_info *new_smi) goto out_err; } new_smi->dev = &new_smi->pdev->dev; - new_smi->dev->driver = &ipmi_driver; + new_smi->dev->driver = &ipmi_driver.driver; rv = platform_device_add(new_smi->pdev); if (rv) { @@ -2983,7 +2985,7 @@ static __devinit int init_ipmi_si(void) initialized = 1; /* Register the device drivers. */ - rv = driver_register(&ipmi_driver); + rv = driver_register(&ipmi_driver.driver); if (rv) { printk(KERN_ERR "init_ipmi_si: Unable to register driver: %d\n", @@ -3052,7 +3054,7 @@ static __devinit int init_ipmi_si(void) #ifdef CONFIG_PPC_OF of_unregister_platform_driver(&ipmi_of_platform_driver); #endif - driver_unregister(&ipmi_driver); + driver_unregister(&ipmi_driver.driver); printk(KERN_WARNING "ipmi_si: Unable to find any System Interface(s)\n"); return -ENODEV; @@ -3151,7 +3153,7 @@ static __exit void cleanup_ipmi_si(void) cleanup_one_si(e); mutex_unlock(&smi_infos_lock); - driver_unregister(&ipmi_driver); + driver_unregister(&ipmi_driver.driver); } module_exit(cleanup_ipmi_si); diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c index 7b0ed5dea39..fe74609a7fe 100644 --- a/drivers/hwmon/ibmaem.c +++ b/drivers/hwmon/ibmaem.c @@ -88,9 +88,11 @@ static DEFINE_IDR(aem_idr); static DEFINE_SPINLOCK(aem_idr_lock); -static struct device_driver aem_driver = { - .name = DRVNAME, - .bus = &platform_bus_type, +static struct platform_driver aem_driver = { + .driver = { + .name = DRVNAME, + .bus = &platform_bus_type, + } }; struct aem_ipmi_data { @@ -583,7 +585,7 @@ static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle) data->pdev = platform_device_alloc(DRVNAME, data->id); if (!data->pdev) goto dev_err; - data->pdev->dev.driver = &aem_driver; + data->pdev->dev.driver = &aem_driver.driver; res = platform_device_add(data->pdev); if (res) @@ -716,7 +718,7 @@ static int aem_init_aem2_inst(struct aem_ipmi_data *probe, data->pdev = platform_device_alloc(DRVNAME, data->id); if (!data->pdev) goto dev_err; - data->pdev->dev.driver = &aem_driver; + data->pdev->dev.driver = &aem_driver.driver; res = platform_device_add(data->pdev); if (res) @@ -1085,7 +1087,7 @@ static int __init aem_init(void) { int res; - res = driver_register(&aem_driver); + res = driver_register(&aem_driver.driver); if (res) { printk(KERN_ERR "Can't register aem driver\n"); return res; @@ -1097,7 +1099,7 @@ static int __init aem_init(void) return 0; ipmi_reg_err: - driver_unregister(&aem_driver); + driver_unregister(&aem_driver.driver); return res; } @@ -1107,7 +1109,7 @@ static void __exit aem_exit(void) struct aem_data *p1, *next1; ipmi_smi_watcher_unregister(&driver_data.bmc_events); - driver_unregister(&aem_driver); + driver_unregister(&aem_driver.driver); list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list) aem_delete(p1); } -- cgit v1.2.3-70-g09d2 From f0f7e0dc7393268947dc3ed285defc3d375487b9 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:25:36 -0800 Subject: i5000-edac: hold reference to mci kobject It turns out that edac_mc_del_mc will kobject_put the last kref on the mci object. If the timing is just right, that means that the mci object is freed before before i5000_remove_one has a chance to free the resources associated with it, causing a null pointer exceptions when unloading the driver. Insert a kobject_{get,put} pair so that this doesn't happen. Signed-off-by: Darrick J. Wong Cc: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/i5000_edac.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index f0d9b415db5..d335086f4a2 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -1381,6 +1381,7 @@ static int i5000_probe1(struct pci_dev *pdev, int dev_idx) if (mci == NULL) return -ENOMEM; + kobject_get(&mci->edac_mci_kobj); debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci); mci->dev = &pdev->dev; /* record ptr to the generic device */ @@ -1453,6 +1454,7 @@ fail1: i5000_put_devices(mci); fail0: + kobject_put(&mci->edac_mci_kobj); edac_mc_free(mci); return -ENODEV; } @@ -1498,7 +1500,7 @@ static void __devexit i5000_remove_one(struct pci_dev *pdev) /* retrieve references to resources, and free those resources */ i5000_put_devices(mci); - + kobject_put(&mci->edac_mci_kobj); edac_mc_free(mci); } -- cgit v1.2.3-70-g09d2 From e33c3b5e172e2e45456f42fba47227d48745543f Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Wed, 12 Nov 2008 13:25:37 -0800 Subject: cpusets: update mems allowed in page allocator If all allowable memory is unreclaimable, it is possible to loop forever in the page allocator for ~__GFP_NORETRY allocations. During this time, it is also possible for a task's cpuset to expand its set of allowable nodes so that it now includes free memory. The cached copy of this set, current->mems_allowed, is stale, however, since there has not been a subsequent call to cpuset_update_task_memory_state(). The cached copy of the set of allowable nodes is now updated in the page allocator's slow path so the additional memory is available to get_page_from_freelist(). [akpm@linux-foundation.org: add comment] Signed-off-by: David Rientjes Cc: Paul Menage Cc: Christoph Lameter Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 54069e64e3a..d8ac0147456 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1561,6 +1561,10 @@ nofail_alloc: /* We now go into synchronous reclaim */ cpuset_memory_pressure_bump(); + /* + * The task's cpuset might have expanded its set of allowable nodes + */ + cpuset_update_task_memory_state(); p->flags |= PF_MEMALLOC; reclaim_state.reclaimed_slab = 0; p->reclaim_state = &reclaim_state; -- cgit v1.2.3-70-g09d2 From 0bcb6069a6e1af5c114a2a8873ec43ada8933596 Mon Sep 17 00:00:00 2001 From: John Linn Date: Wed, 12 Nov 2008 13:25:38 -0800 Subject: GPIO: add new Xilinx driver for powerpc This driver supports the Xilinx XPS GPIO IP core which has the typical GPIO features. Signed-off-by: Kiran Sutariya Signed-off-by: John Linn Cc: David Brownell Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Kumar Gala Cc: "Grant Likely" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/Kconfig | 8 ++ drivers/gpio/Makefile | 1 + drivers/gpio/xilinx_gpio.c | 235 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 244 insertions(+) create mode 100644 drivers/gpio/xilinx_gpio.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 7f2ee27fe76..48f49d93d24 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -65,6 +65,14 @@ config GPIO_SYSFS # put expanders in the right section, in alphabetical order +comment "Memory mapped GPIO expanders:" + +config GPIO_XILINX + bool "Xilinx GPIO support" + depends on PPC_OF + help + Say yes here to support the Xilinx FPGA GPIO device + comment "I2C GPIO expanders:" config GPIO_MAX732X diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 6aafdeb9ad0..49ac64e515e 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -10,4 +10,5 @@ obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o obj-$(CONFIG_GPIO_PCA953X) += pca953x.o obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o +obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c new file mode 100644 index 00000000000..3c1177abebd --- /dev/null +++ b/drivers/gpio/xilinx_gpio.c @@ -0,0 +1,235 @@ +/* + * Xilinx gpio driver + * + * Copyright 2008 Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Register Offset Definitions */ +#define XGPIO_DATA_OFFSET (0x0) /* Data register */ +#define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */ + +struct xgpio_instance { + struct of_mm_gpio_chip mmchip; + u32 gpio_state; /* GPIO state shadow register */ + u32 gpio_dir; /* GPIO direction shadow register */ + spinlock_t gpio_lock; /* Lock used for synchronization */ +}; + +/** + * xgpio_get - Read the specified signal of the GPIO device. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * + * This function reads the specified signal of the GPIO device. It returns 0 if + * the signal clear, 1 if signal is set or negative value on error. + */ +static int xgpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + + return (in_be32(mm_gc->regs + XGPIO_DATA_OFFSET) >> gpio) & 1; +} + +/** + * xgpio_set - Write the specified signal of the GPIO device. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * This function writes the specified value in to the specified signal of the + * GPIO device. + */ +static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + spin_lock_irqsave(&chip->gpio_lock, flags); + + /* Write to GPIO signal and set its direction to output */ + if (val) + chip->gpio_state |= 1 << gpio; + else + chip->gpio_state &= ~(1 << gpio); + out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state); + + spin_unlock_irqrestore(&chip->gpio_lock, flags); +} + +/** + * xgpio_dir_in - Set the direction of the specified GPIO signal as input. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * + * This function sets the direction of specified GPIO signal as input. + * It returns 0 if direction of GPIO signals is set as input otherwise it + * returns negative error value. + */ +static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + spin_lock_irqsave(&chip->gpio_lock, flags); + + /* Set the GPIO bit in shadow register and set direction as input */ + chip->gpio_dir |= (1 << gpio); + out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir); + + spin_unlock_irqrestore(&chip->gpio_lock, flags); + + return 0; +} + +/** + * xgpio_dir_out - Set the direction of the specified GPIO signal as output. + * @gc: Pointer to gpio_chip device structure. + * @gpio: GPIO signal number. + * @val: Value to be written to specified signal. + * + * This function sets the direction of specified GPIO signal as output. If all + * GPIO signals of GPIO chip is configured as input then it returns + * error otherwise it returns 0. + */ +static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + unsigned long flags; + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + spin_lock_irqsave(&chip->gpio_lock, flags); + + /* Write state of GPIO signal */ + if (val) + chip->gpio_state |= 1 << gpio; + else + chip->gpio_state &= ~(1 << gpio); + out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state); + + /* Clear the GPIO bit in shadow register and set direction as output */ + chip->gpio_dir &= (~(1 << gpio)); + out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir); + + spin_unlock_irqrestore(&chip->gpio_lock, flags); + + return 0; +} + +/** + * xgpio_save_regs - Set initial values of GPIO pins + * @mm_gc: pointer to memory mapped GPIO chip structure + */ +static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct xgpio_instance *chip = + container_of(mm_gc, struct xgpio_instance, mmchip); + + out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state); + out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir); +} + +/** + * xgpio_of_probe - Probe method for the GPIO device. + * @np: pointer to device tree node + * + * This function probes the GPIO device in the device tree. It initializes the + * driver data structure. It returns 0, if the driver is bound to the GPIO + * device, or a negative value if there is an error. + */ +static int __devinit xgpio_of_probe(struct device_node *np) +{ + struct xgpio_instance *chip; + struct of_gpio_chip *ofchip; + int status = 0; + const u32 *tree_info; + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + ofchip = &chip->mmchip.of_gc; + + /* Update GPIO state shadow register with default value */ + tree_info = of_get_property(np, "xlnx,dout-default", NULL); + if (tree_info) + chip->gpio_state = *tree_info; + + /* Update GPIO direction shadow register with default value */ + chip->gpio_dir = 0xFFFFFFFF; /* By default, all pins are inputs */ + tree_info = of_get_property(np, "xlnx,tri-default", NULL); + if (tree_info) + chip->gpio_dir = *tree_info; + + /* Check device node and parent device node for device width */ + ofchip->gc.ngpio = 32; /* By default assume full GPIO controller */ + tree_info = of_get_property(np, "xlnx,gpio-width", NULL); + if (!tree_info) + tree_info = of_get_property(np->parent, + "xlnx,gpio-width", NULL); + if (tree_info) + ofchip->gc.ngpio = *tree_info; + + spin_lock_init(&chip->gpio_lock); + + ofchip->gpio_cells = 2; + ofchip->gc.direction_input = xgpio_dir_in; + ofchip->gc.direction_output = xgpio_dir_out; + ofchip->gc.get = xgpio_get; + ofchip->gc.set = xgpio_set; + + chip->mmchip.save_regs = xgpio_save_regs; + + /* Call the OF gpio helper to setup and register the GPIO device */ + status = of_mm_gpiochip_add(np, &chip->mmchip); + if (status) { + kfree(chip); + pr_err("%s: error in probe function with status %d\n", + np->full_name, status); + return status; + } + pr_info("XGpio: %s: registered\n", np->full_name); + return 0; +} + +static struct of_device_id xgpio_of_match[] __devinitdata = { + { .compatible = "xlnx,xps-gpio-1.00.a", }, + { /* end of list */ }, +}; + +static int __init xgpio_init(void) +{ + struct device_node *np; + + for_each_matching_node(np, xgpio_of_match) + xgpio_of_probe(np); + + return 0; +} + +/* Make sure we get initialized before anyone else tries to use us */ +subsys_initcall(xgpio_init); +/* No exit call at the moment as we cannot unregister of GPIO chips */ + +MODULE_AUTHOR("Xilinx, Inc."); +MODULE_DESCRIPTION("Xilinx GPIO driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From 687446760bd008df96655cb8c5900f8e48a7118c Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 12 Nov 2008 13:26:49 -0800 Subject: freezer_cg: remove task_lock from freezer_fork() In theory the task can be moved to another cgroup and the freezer will be freed right after task_lock is dropped, so the lock results in zero protection. But in the case of freezer_fork() no lock is needed, since the task is not in tasklist yet so it won't be moved to another cgroup, so task->cgroups won't be changed or invalidated. Signed-off-by: Li Zefan Cc: Matt Helsley Cc: Cedric Le Goater Cc: "Serge E. Hallyn" Cc: Paul Menage Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup_freezer.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/kernel/cgroup_freezer.c b/kernel/cgroup_freezer.c index 7fa476f01d0..66059071040 100644 --- a/kernel/cgroup_freezer.c +++ b/kernel/cgroup_freezer.c @@ -184,9 +184,13 @@ static void freezer_fork(struct cgroup_subsys *ss, struct task_struct *task) { struct freezer *freezer; - task_lock(task); + /* + * No lock is needed, since the task isn't on tasklist yet, + * so it can't be moved to another cgroup, which means the + * freezer won't be removed and will be valid during this + * function call. + */ freezer = task_freezer(task); - task_unlock(task); spin_lock_irq(&freezer->lock); BUG_ON(freezer->state == CGROUP_FROZEN); -- cgit v1.2.3-70-g09d2 From 3b1b3f6e57064aa8f91c290fe51cda4c74642902 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 12 Nov 2008 13:26:50 -0800 Subject: freezer_cg: disable writing freezer.state of root cgroup With this change, control file 'freezer.state' doesn't exist in root cgroup, making root cgroup unfreezable. I think it's reasonable to disallow freeze tasks in the root cgroup. And then we can avoid fork overhead when freezer subsystem is compiled but not used. Also make writing invalid value to freezer.state returns EINVAL rather than EIO. This is more consistent with other cgroup subsystem. Signed-off-by: Li Zefan Acked-by: Paul Menage Cc: Cedric Le Goater Cc: Paul Menage Cc: Matt Helsley Cc: "Serge E. Hallyn" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/cgroups/freezer-subsystem.txt | 21 ++++++++++++--------- kernel/cgroup_freezer.c | 11 ++++++++++- 2 files changed, 22 insertions(+), 10 deletions(-) diff --git a/Documentation/cgroups/freezer-subsystem.txt b/Documentation/cgroups/freezer-subsystem.txt index c50ab58b72e..41f37fea127 100644 --- a/Documentation/cgroups/freezer-subsystem.txt +++ b/Documentation/cgroups/freezer-subsystem.txt @@ -1,4 +1,4 @@ - The cgroup freezer is useful to batch job management system which start +The cgroup freezer is useful to batch job management system which start and stop sets of tasks in order to schedule the resources of a machine according to the desires of a system administrator. This sort of program is often used on HPC clusters to schedule access to the cluster as a @@ -6,7 +6,7 @@ whole. The cgroup freezer uses cgroups to describe the set of tasks to be started/stopped by the batch job management system. It also provides a means to start and stop the tasks composing the job. - The cgroup freezer will also be useful for checkpointing running groups +The cgroup freezer will also be useful for checkpointing running groups of tasks. The freezer allows the checkpoint code to obtain a consistent image of the tasks by attempting to force the tasks in a cgroup into a quiescent state. Once the tasks are quiescent another task can @@ -16,7 +16,7 @@ recoverable error occur. This also allows the checkpointed tasks to be migrated between nodes in a cluster by copying the gathered information to another node and restarting the tasks there. - Sequences of SIGSTOP and SIGCONT are not always sufficient for stopping +Sequences of SIGSTOP and SIGCONT are not always sufficient for stopping and resuming tasks in userspace. Both of these signals are observable from within the tasks we wish to freeze. While SIGSTOP cannot be caught, blocked, or ignored it can be seen by waiting or ptracing parent tasks. @@ -37,26 +37,29 @@ demonstrate this problem using nested bash shells: - This happens because bash can observe both signals and choose how it +This happens because bash can observe both signals and choose how it responds to them. - Another example of a program which catches and responds to these +Another example of a program which catches and responds to these signals is gdb. In fact any program designed to use ptrace is likely to have a problem with this method of stopping and resuming tasks. - In contrast, the cgroup freezer uses the kernel freezer code to +In contrast, the cgroup freezer uses the kernel freezer code to prevent the freeze/unfreeze cycle from becoming visible to the tasks being frozen. This allows the bash example above and gdb to run as expected. - The freezer subsystem in the container filesystem defines a file named +The freezer subsystem in the container filesystem defines a file named freezer.state. Writing "FROZEN" to the state file will freeze all tasks in the cgroup. Subsequently writing "THAWED" will unfreeze the tasks in the cgroup. Reading will return the current state. +Note freezer.state doesn't exist in root cgroup, which means root cgroup +is non-freezable. + * Examples of usage : - # mkdir /containers/freezer + # mkdir /containers # mount -t cgroup -ofreezer freezer /containers # mkdir /containers/0 # echo $some_pid > /containers/0/tasks @@ -94,6 +97,6 @@ things happens: the freezer.state file 2) Userspace retries the freezing operation by writing "FROZEN" to the freezer.state file (writing "FREEZING" is not legal - and returns EIO) + and returns EINVAL) 3) The tasks that blocked the cgroup from entering the "FROZEN" state disappear from the cgroup's set of tasks. diff --git a/kernel/cgroup_freezer.c b/kernel/cgroup_freezer.c index 66059071040..fb249e2bcad 100644 --- a/kernel/cgroup_freezer.c +++ b/kernel/cgroup_freezer.c @@ -192,6 +192,13 @@ static void freezer_fork(struct cgroup_subsys *ss, struct task_struct *task) */ freezer = task_freezer(task); + /* + * The root cgroup is non-freezable, so we can skip the + * following check. + */ + if (!freezer->css.cgroup->parent) + return; + spin_lock_irq(&freezer->lock); BUG_ON(freezer->state == CGROUP_FROZEN); @@ -335,7 +342,7 @@ static int freezer_write(struct cgroup *cgroup, else if (strcmp(buffer, freezer_state_strs[CGROUP_FROZEN]) == 0) goal_state = CGROUP_FROZEN; else - return -EIO; + return -EINVAL; if (!cgroup_lock_live_group(cgroup)) return -ENODEV; @@ -354,6 +361,8 @@ static struct cftype files[] = { static int freezer_populate(struct cgroup_subsys *ss, struct cgroup *cgroup) { + if (!cgroup->parent) + return 0; return cgroup_add_files(cgroup, ss, files, ARRAY_SIZE(files)); } -- cgit v1.2.3-70-g09d2 From a189d0350f387786b1fb5a5d19e3a5ab0bc0cceb Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Wed, 12 Nov 2008 13:26:51 -0800 Subject: kprobes: disable preempt for module_text_address() and kernel_text_address() __register_kprobe() can be preempted after checking probing address but before module_text_address() or try_module_get(), and in this interval the module can be unloaded. In that case, try_module_get(probed_mod) will access to invalid address, or kprobe will probe invalid address. This patch uses preempt_disable() to protect it and uses __module_text_address() and __kernel_text_address(). Signed-off-by: Lai Jiangshan Signed-off-by: Masami Hiramatsu Cc: Ananth N Mavinakayanahalli Cc: Hiroshi Shimamoto Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/kprobes.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/kernel/kprobes.c b/kernel/kprobes.c index 8b57a2597f2..f83c5e42fb0 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -613,30 +613,37 @@ static int __kprobes __register_kprobe(struct kprobe *p, return -EINVAL; p->addr = addr; - if (!kernel_text_address((unsigned long) p->addr) || - in_kprobes_functions((unsigned long) p->addr)) + preempt_disable(); + if (!__kernel_text_address((unsigned long) p->addr) || + in_kprobes_functions((unsigned long) p->addr)) { + preempt_enable(); return -EINVAL; + } p->mod_refcounted = 0; /* * Check if are we probing a module. */ - probed_mod = module_text_address((unsigned long) p->addr); + probed_mod = __module_text_address((unsigned long) p->addr); if (probed_mod) { - struct module *calling_mod = module_text_address(called_from); + struct module *calling_mod; + calling_mod = __module_text_address(called_from); /* * We must allow modules to probe themself and in this case * avoid incrementing the module refcount, so as to allow * unloading of self probing modules. */ if (calling_mod && calling_mod != probed_mod) { - if (unlikely(!try_module_get(probed_mod))) + if (unlikely(!try_module_get(probed_mod))) { + preempt_enable(); return -EINVAL; + } p->mod_refcounted = 1; } else probed_mod = NULL; } + preempt_enable(); p->nmissed = 0; INIT_LIST_HEAD(&p->list); @@ -718,6 +725,10 @@ static void __kprobes __unregister_kprobe_bottom(struct kprobe *p) struct kprobe *old_p; if (p->mod_refcounted) { + /* + * Since we've already incremented refcount, + * we don't need to disable preemption. + */ mod = module_text_address((unsigned long)p->addr); if (mod) module_put(mod); -- cgit v1.2.3-70-g09d2 From 8891d6da17db0f9bb507d3a017f130b9970c3087 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Wed, 12 Nov 2008 13:26:53 -0800 Subject: mm: remove lru_add_drain_all() from the munlock path lockdep warns about following message at boot time on one of my test machine. Then, schedule_on_each_cpu() sholdn't be called when the task have mmap_sem. Actually, lru_add_drain_all() exist to prevent the unevictalble pages stay on reclaimable lru list. but currenct unevictable code can rescue unevictable pages although it stay on reclaimable list. So removing is better. In addition, this patch add lru_add_drain_all() to sys_mlock() and sys_mlockall(). it isn't must. but it reduce the failure of moving to unevictable list. its failure can rescue in vmscan later. but reducing is better. Note, if above rescuing happend, the Mlocked and the Unevictable field mismatching happend in /proc/meminfo. but it doesn't cause any real trouble. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.28-rc2-mm1 #2 ------------------------------------------------------- lvm/1103 is trying to acquire lock: (&cpu_hotplug.lock){--..}, at: [] get_online_cpus+0x29/0x50 but task is already holding lock: (&mm->mmap_sem){----}, at: [] sys_mlockall+0x4e/0xb0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_sem){----}: [] check_noncircular+0x82/0x110 [] might_fault+0x4a/0xa0 [] validate_chain+0xb11/0x1070 [] might_fault+0x4a/0xa0 [] __lock_acquire+0x263/0xa10 [] lock_acquire+0x7c/0xb0 (*) grab mmap_sem [] might_fault+0x4a/0xa0 [] might_fault+0x7b/0xa0 [] might_fault+0x4a/0xa0 [] copy_to_user+0x30/0x60 [] filldir+0x7c/0xd0 [] sysfs_readdir+0x11a/0x1f0 (*) grab sysfs_mutex [] filldir+0x0/0xd0 [] filldir+0x0/0xd0 [] vfs_readdir+0x86/0xa0 (*) grab i_mutex [] sys_getdents+0x6b/0xc0 [] syscall_call+0x7/0xb [] 0xffffffff -> #2 (sysfs_mutex){--..}: [] check_noncircular+0x82/0x110 [] sysfs_addrm_start+0x2c/0xc0 [] validate_chain+0xb11/0x1070 [] sysfs_addrm_start+0x2c/0xc0 [] __lock_acquire+0x263/0xa10 [] lock_acquire+0x7c/0xb0 (*) grab sysfs_mutex [] sysfs_addrm_start+0x2c/0xc0 [] mutex_lock_nested+0xa5/0x2f0 [] sysfs_addrm_start+0x2c/0xc0 [] sysfs_addrm_start+0x2c/0xc0 [] sysfs_addrm_start+0x2c/0xc0 [] create_dir+0x3f/0x90 [] sysfs_create_dir+0x29/0x50 [] _spin_unlock+0x25/0x40 [] kobject_add_internal+0xcd/0x1a0 [] kobject_set_name_vargs+0x3a/0x50 [] kobject_init_and_add+0x2d/0x40 [] sysfs_slab_add+0xd2/0x180 [] sysfs_add_func+0x0/0x70 [] sysfs_add_func+0x5c/0x70 (*) grab slub_lock [] run_workqueue+0x172/0x200 [] run_workqueue+0x10f/0x200 [] worker_thread+0x0/0xf0 [] worker_thread+0x9c/0xf0 [] autoremove_wake_function+0x0/0x50 [] worker_thread+0x0/0xf0 [] kthread+0x42/0x70 [] kthread+0x0/0x70 [] kernel_thread_helper+0x7/0x1c [] 0xffffffff -> #1 (slub_lock){----}: [] check_noncircular+0xd/0x110 [] slab_cpuup_callback+0x11f/0x1d0 [] validate_chain+0xb11/0x1070 [] slab_cpuup_callback+0x11f/0x1d0 [] mark_lock+0x35d/0xd00 [] __lock_acquire+0x263/0xa10 [] lock_acquire+0x7c/0xb0 [] slab_cpuup_callback+0x11f/0x1d0 [] down_read+0x43/0x80 [] slab_cpuup_callback+0x11f/0x1d0 (*) grab slub_lock [] slab_cpuup_callback+0x11f/0x1d0 [] notifier_call_chain+0x3c/0x70 [] _cpu_up+0x84/0x110 [] cpu_up+0x4b/0x70 (*) grab cpu_hotplug.lock [] kernel_init+0x0/0x170 [] kernel_init+0xb5/0x170 [] kernel_init+0x0/0x170 [] kernel_thread_helper+0x7/0x1c [] 0xffffffff -> #0 (&cpu_hotplug.lock){--..}: [] validate_chain+0x5af/0x1070 [] dev_status+0x0/0x50 [] __lock_acquire+0x263/0xa10 [] lock_acquire+0x7c/0xb0 [] get_online_cpus+0x29/0x50 [] mutex_lock_nested+0xa5/0x2f0 [] get_online_cpus+0x29/0x50 [] get_online_cpus+0x29/0x50 [] lru_add_drain_per_cpu+0x0/0x10 [] get_online_cpus+0x29/0x50 (*) grab cpu_hotplug.lock [] schedule_on_each_cpu+0x32/0xe0 [] __mlock_vma_pages_range+0x85/0x2c0 [] __lock_acquire+0x285/0xa10 [] vma_merge+0xa9/0x1d0 [] mlock_fixup+0x180/0x200 [] do_mlockall+0x78/0x90 (*) grab mmap_sem [] sys_mlockall+0x81/0xb0 [] syscall_call+0x7/0xb [] 0xffffffff other info that might help us debug this: 1 lock held by lvm/1103: #0: (&mm->mmap_sem){----}, at: [] sys_mlockall+0x4e/0xb0 stack backtrace: Pid: 1103, comm: lvm Not tainted 2.6.28-rc2-mm1 #2 Call Trace: [] print_circular_bug_tail+0x7c/0xd0 [] validate_chain+0x5af/0x1070 [] dev_status+0x0/0x50 [] __lock_acquire+0x263/0xa10 [] lock_acquire+0x7c/0xb0 [] get_online_cpus+0x29/0x50 [] mutex_lock_nested+0xa5/0x2f0 [] get_online_cpus+0x29/0x50 [] get_online_cpus+0x29/0x50 [] lru_add_drain_per_cpu+0x0/0x10 [] get_online_cpus+0x29/0x50 [] schedule_on_each_cpu+0x32/0xe0 [] __mlock_vma_pages_range+0x85/0x2c0 [] __lock_acquire+0x285/0xa10 [] vma_merge+0xa9/0x1d0 [] mlock_fixup+0x180/0x200 [] do_mlockall+0x78/0x90 [] sys_mlockall+0x81/0xb0 [] syscall_call+0x7/0xb Signed-off-by: KOSAKI Motohiro Tested-by: Kamalesh Babulal Cc: Lee Schermerhorn Cc: Christoph Lameter Cc: Heiko Carstens Cc: Nick Piggin Cc: Hugh Dickins Cc: Rik van Riel Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mlock.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/mm/mlock.c b/mm/mlock.c index 008ea70b7af..a6da2aee940 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -66,14 +66,10 @@ void __clear_page_mlock(struct page *page) putback_lru_page(page); } else { /* - * Page not on the LRU yet. Flush all pagevecs and retry. + * We lost the race. the page already moved to evictable list. */ - lru_add_drain_all(); - if (!isolate_lru_page(page)) - putback_lru_page(page); - else if (PageUnevictable(page)) + if (PageUnevictable(page)) count_vm_event(UNEVICTABLE_PGSTRANDED); - } } @@ -187,8 +183,6 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma, if (vma->vm_flags & VM_WRITE) gup_flags |= GUP_FLAGS_WRITE; - lru_add_drain_all(); /* push cached pages to LRU */ - while (nr_pages > 0) { int i; @@ -251,8 +245,6 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma, ret = 0; } - lru_add_drain_all(); /* to update stats */ - return ret; /* count entire vma as locked_vm */ } @@ -546,6 +538,8 @@ asmlinkage long sys_mlock(unsigned long start, size_t len) if (!can_do_mlock()) return -EPERM; + lru_add_drain_all(); /* flush pagevec */ + down_write(¤t->mm->mmap_sem); len = PAGE_ALIGN(len + (start & ~PAGE_MASK)); start &= PAGE_MASK; @@ -612,6 +606,8 @@ asmlinkage long sys_mlockall(int flags) if (!can_do_mlock()) goto out; + lru_add_drain_all(); /* flush pagevec */ + down_write(¤t->mm->mmap_sem); lock_limit = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur; -- cgit v1.2.3-70-g09d2 From afef80b3d87cae574b8c6b763505f25b74d254ef Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 12 Nov 2008 13:26:54 -0800 Subject: vfs: fix shrink_submounts In the last refactoring of shrink_submounts a variable was not completely renamed. So finish the renaming of mnt to m now. Without this if you attempt to mount an nfs mount that has both automatic nfs sub mounts on it, and has normal mounts on it. The unmount will succeed when it should not. Signed-off-by: Eric W. Biederman Cc: Alexey Dobriyan Cc: Al Viro Signed-off-by: Linus Torvalds --- fs/namespace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/namespace.c b/fs/namespace.c index cce46702d33..65b3dc844c8 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1815,8 +1815,8 @@ static void shrink_submounts(struct vfsmount *mnt, struct list_head *umounts) while (!list_empty(&graveyard)) { m = list_first_entry(&graveyard, struct vfsmount, mnt_expire); - touch_mnt_namespace(mnt->mnt_ns); - umount_tree(mnt, 1, umounts); + touch_mnt_namespace(m->mnt_ns); + umount_tree(m, 1, umounts); } } } -- cgit v1.2.3-70-g09d2 From b76f90b526737070302a127c710263e2ac707676 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 12 Nov 2008 13:26:55 -0800 Subject: remove ratelimt() It mistakenly assumes that a static local in an inlined function is a kernel-wide singleton. It also has no callers, so let's remove it. Cc: Dave Young Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ratelimit.h | 7 ------- 1 file changed, 7 deletions(-) diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h index 18a5b9ba9d4..00044b85645 100644 --- a/include/linux/ratelimit.h +++ b/include/linux/ratelimit.h @@ -17,11 +17,4 @@ struct ratelimit_state { struct ratelimit_state name = {interval, burst,} extern int __ratelimit(struct ratelimit_state *rs); - -static inline int ratelimit(void) -{ - static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL, - DEFAULT_RATELIMIT_BURST); - return __ratelimit(&rs); -} #endif -- cgit v1.2.3-70-g09d2 From b67ad18b06701b77ca8bfe9bb760c5c9e765e3cf Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 12 Nov 2008 13:26:55 -0800 Subject: DOC: add printk-formats.txt Add printk-formats.txt so that we don't have to keep fixing the same things over and over again. Signed-off-by: Randy Dunlap Cc: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/00-INDEX | 2 ++ Documentation/printk-formats.txt | 35 +++++++++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+) create mode 100644 Documentation/printk-formats.txt diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index edef85ce119..50f99eab0e1 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -290,6 +290,8 @@ powerpc/ - directory with info on using Linux with the PowerPC. preempt-locking.txt - info on locking under a preemptive kernel. +printk-formats.txt + - how to get printk format specifiers right prio_tree.txt - info on radix-priority-search-tree use for indexing vmas. ramdisk.txt diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt new file mode 100644 index 00000000000..1b5a5ddbc3e --- /dev/null +++ b/Documentation/printk-formats.txt @@ -0,0 +1,35 @@ +If variable is of Type, use printk format specifier: +--------------------------------------------------------- + int %d or %x + unsigned int %u or %x + long %ld or %lx + unsigned long %lu or %lx + long long %lld or %llx + unsigned long long %llu or %llx + size_t %zu or %zx + ssize_t %zd or %zx + +Raw pointer value SHOULD be printed with %p. + +u64 SHOULD be printed with %llu/%llx, (unsigned long long): + + printk("%llu", (unsigned long long)u64_var); + +s64 SHOULD be printed with %lld/%llx, (long long): + + printk("%lld", (long long)s64_var); + +If is dependent on a config option for its size (e.g., sector_t, +blkcnt_t, phys_addr_t, resource_size_t) or is architecture-dependent +for its size (e.g., tcflag_t), use a format specifier of its largest +possible type and explicitly cast to it. Example: + + printk("test: sector number/total blocks: %llu/%llu\n", + (unsigned long long)sector, (unsigned long long)blockcount); + +Reminder: sizeof() result is of type size_t. + +Thank you for your cooperation and attention. + + +By Randy Dunlap -- cgit v1.2.3-70-g09d2 From 084c304980f05833bc8a91b856af7dc7a7bb7d60 Mon Sep 17 00:00:00 2001 From: Marco Stornelli Date: Wed, 12 Nov 2008 13:26:56 -0800 Subject: DOC: update xip method info xip documentation updated: - change "get_xip_page" to "get_xip_mem"; - explain changed function parameters Signed-off-by: Marco Stornelli Signed-off-by: Randy Dunlap Cc: Carsten Otte Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/xip.txt | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/Documentation/filesystems/xip.txt b/Documentation/filesystems/xip.txt index 3cc4010521a..0466ee56927 100644 --- a/Documentation/filesystems/xip.txt +++ b/Documentation/filesystems/xip.txt @@ -39,10 +39,11 @@ The block device operation is optional, these block devices support it as of today: - dcssblk: s390 dcss block device driver -An address space operation named get_xip_page is used to retrieve reference -to a struct page. To address the target page, a reference to an address_space, -and a sector number is provided. A 3rd argument indicates whether the -function should allocate blocks if needed. +An address space operation named get_xip_mem is used to retrieve references +to a page frame number and a kernel address. To obtain these values a reference +to an address_space is provided. This function assigns values to the kmem and +pfn parameters. The third argument indicates whether the function should allocate +blocks if needed. This address space operation is mutually exclusive with readpage&writepage that do page cache read/write operations. -- cgit v1.2.3-70-g09d2 From 7e036d040a28bf95255d7eb9faf0ffbba3677e99 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 12 Nov 2008 13:26:57 -0800 Subject: kernel/kprobes.c: don't pad kretprobe_table_locks[] on uniprocessor builds We only need the cacheline padding on SMP kernels. Saves 6k: text data bss dec hex filename 5713 388 8840 14941 3a5d kernel/kprobes.o 5713 388 2632 8733 221d kernel/kprobes.o Acked-by: Masami Hiramatsu Cc: Ananth N Mavinakayanahalli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/kprobes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/kprobes.c b/kernel/kprobes.c index f83c5e42fb0..9f8a3f25259 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -72,7 +72,7 @@ static bool kprobe_enabled; DEFINE_MUTEX(kprobe_mutex); /* Protects kprobe_table */ static DEFINE_PER_CPU(struct kprobe *, kprobe_instance) = NULL; static struct { - spinlock_t lock ____cacheline_aligned; + spinlock_t lock ____cacheline_aligned_in_smp; } kretprobe_table_locks[KPROBE_TABLE_SIZE]; static spinlock_t *kretprobe_table_lock_ptr(unsigned long hash) -- cgit v1.2.3-70-g09d2 From 05a9bd46e49a9cbb09a0c61c901642a9911bf56e Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:26:57 -0800 Subject: adt7470: check input range when sysfs files are written Implement correct range checking for adt7470 to prevent userland from writing impossible values into the chip, and cap out-of-range values per standard hwmon conventions. Implement correct rounding of input values per standard hwmon conventions. Signed-off-by: Darrick J. Wong Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/adt7470.c | 75 ++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 62 insertions(+), 13 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index d368d8f845e..1311a595147 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -137,6 +137,8 @@ I2C_CLIENT_INSMOD_1(adt7470); #define FAN_PERIOD_INVALID 65535 #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor)) + struct adt7470_data { struct device *hwmon_dev; struct attribute_group attrs; @@ -353,7 +355,13 @@ static ssize_t set_temp_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->temp_min[attr->index] = temp; @@ -381,7 +389,13 @@ static ssize_t set_temp_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->temp_max[attr->index] = temp; @@ -430,11 +444,13 @@ static ssize_t set_fan_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + temp = SENSORS_LIMIT(temp, 1, 65534); mutex_lock(&data->lock); data->fan_max[attr->index] = temp; @@ -465,11 +481,13 @@ static ssize_t set_fan_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + temp = SENSORS_LIMIT(temp, 1, 65534); mutex_lock(&data->lock); data->fan_min[attr->index] = temp; @@ -507,9 +525,12 @@ static ssize_t set_force_pwm_max(struct device *dev, { struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + mutex_lock(&data->lock); data->force_pwm_max = temp; reg = i2c_smbus_read_byte_data(client, ADT7470_REG_CFG); @@ -537,7 +558,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm[attr->index] = temp; @@ -564,7 +590,12 @@ static ssize_t set_pwm_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_max[attr->index] = temp; @@ -592,7 +623,12 @@ static ssize_t set_pwm_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_min[attr->index] = temp; @@ -630,7 +666,13 @@ static ssize_t set_pwm_tmin(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_tmin[attr->index] = temp; @@ -658,11 +700,14 @@ static ssize_t set_pwm_auto(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); int pwm_auto_reg = ADT7470_REG_PWM_CFG(attr->index); int pwm_auto_reg_mask; + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + if (attr->index % 2) pwm_auto_reg_mask = ADT7470_PWM2_AUTO_MASK; else @@ -716,10 +761,14 @@ static ssize_t set_pwm_auto_temp(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7470_data *data = i2c_get_clientdata(client); - int temp = cvt_auto_temp(simple_strtol(buf, NULL, 10)); int pwm_auto_reg = ADT7470_REG_PWM_AUTO_TEMP(attr->index); + long temp; u8 reg; + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = cvt_auto_temp(temp); if (temp < 0) return temp; -- cgit v1.2.3-70-g09d2 From 862343c4ea2ece307f25db1812637cff142d3263 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:26:58 -0800 Subject: adt7473: check inputs from sysfs writes Implement correct range checking for adt7470 to prevent userland from writing impossible values into the chip, and cap out-of-range values per standard hwmon conventions. Implement correct rounding of input values per standard hwmon conventions. Signed-off-by: Darrick J. Wong Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/adt7473.c | 89 ++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 74 insertions(+), 15 deletions(-) diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index b9a8ea30c99..18aa30866a6 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -129,6 +129,8 @@ I2C_CLIENT_INSMOD_1(adt7473); #define FAN_PERIOD_INVALID 65535 #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor)) + struct adt7473_data { struct device *hwmon_dev; struct attribute_group attrs; @@ -357,7 +359,12 @@ static ssize_t set_volt_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + long volt; + + if (strict_strtol(buf, 10, &volt)) + return -EINVAL; + + volt = encode_volt(attr->index, volt); mutex_lock(&data->lock); data->volt_min[attr->index] = volt; @@ -386,7 +393,12 @@ static ssize_t set_volt_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10)); + long volt; + + if (strict_strtol(buf, 10, &volt)) + return -EINVAL; + + volt = encode_volt(attr->index, volt); mutex_lock(&data->lock); data->volt_max[attr->index] = volt; @@ -419,7 +431,8 @@ static int decode_temp(u8 twos_complement, u8 raw) static u8 encode_temp(u8 twos_complement, int cooked) { - return twos_complement ? cooked & 0xFF : cooked + 64; + u8 ret = twos_complement ? cooked & 0xFF : cooked + 64; + return SENSORS_LIMIT(ret, 0, 255); } static ssize_t show_temp_min(struct device *dev, @@ -441,7 +454,12 @@ static ssize_t set_temp_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -472,7 +490,12 @@ static ssize_t set_temp_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -515,11 +538,13 @@ static ssize_t set_fan_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; - if (!temp) + if (strict_strtol(buf, 10, &temp) || !temp) return -EINVAL; + temp = FAN_RPM_TO_PERIOD(temp); + temp = SENSORS_LIMIT(temp, 1, 65534); mutex_lock(&data->lock); data->fan_min[attr->index] = temp; @@ -558,7 +583,10 @@ static ssize_t set_max_duty_at_crit(struct device *dev, u8 reg; struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; mutex_lock(&data->lock); data->max_duty_at_overheat = !!temp; @@ -587,7 +615,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm[attr->index] = temp; @@ -614,7 +647,12 @@ static ssize_t set_pwm_max(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_max[attr->index] = temp; @@ -642,7 +680,12 @@ static ssize_t set_pwm_min(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); mutex_lock(&data->lock); data->pwm_min[attr->index] = temp; @@ -672,7 +715,12 @@ static ssize_t set_temp_tmax(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -703,7 +751,12 @@ static ssize_t set_temp_tmin(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10) / 1000; + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); temp = encode_temp(data->temp_twos_complement, temp); mutex_lock(&data->lock); @@ -741,7 +794,10 @@ static ssize_t set_pwm_enable(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; switch (temp) { case 0: @@ -805,7 +861,10 @@ static ssize_t set_pwm_auto_temp(struct device *dev, struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); - int temp = simple_strtol(buf, NULL, 10); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; switch (temp) { case 1: -- cgit v1.2.3-70-g09d2 From 79b92f2bab0dc5ac70e8391548f75ac3268426e4 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:26:59 -0800 Subject: lm85: support adt7468 chips The adt7468 is a follow-on to the adt7463, so plumb in adt7468 support along the same code paths. Signed-off-by: Darrick J. Wong Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/lm85.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 46 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 3ff0285396f..cfc1ee90f5a 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -39,7 +39,8 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; /* Insmod parameters */ -I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); +I2C_CLIENT_INSMOD_7(lm85b, lm85c, adm1027, adt7463, adt7468, emc6d100, + emc6d102); /* The LM85 registers */ @@ -59,6 +60,12 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_REG_COMPANY 0x3e #define LM85_REG_VERSTEP 0x3f + +#define ADT7468_REG_CFG5 0x7c +#define ADT7468_OFF64 0x01 +#define IS_ADT7468_OFF64(data) \ + ((data)->type == adt7468 && !((data)->cfg5 & ADT7468_OFF64)) + /* These are the recognized values for the above regs */ #define LM85_COMPANY_NATIONAL 0x01 #define LM85_COMPANY_ANALOG_DEV 0x41 @@ -70,6 +77,8 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_VERSTEP_ADM1027 0x60 #define LM85_VERSTEP_ADT7463 0x62 #define LM85_VERSTEP_ADT7463C 0x6A +#define LM85_VERSTEP_ADT7468_1 0x71 +#define LM85_VERSTEP_ADT7468_2 0x72 #define LM85_VERSTEP_EMC6D100_A0 0x60 #define LM85_VERSTEP_EMC6D100_A1 0x61 #define LM85_VERSTEP_EMC6D102 0x65 @@ -306,6 +315,7 @@ struct lm85_data { u8 vid; /* Register value */ u8 vrm; /* VRM version */ u32 alarms; /* Register encoding, combined */ + u8 cfg5; /* Config Register 5 on ADT7468 */ struct lm85_autofan autofan[3]; struct lm85_zone zone[3]; }; @@ -685,6 +695,9 @@ static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); + if (IS_ADT7468_OFF64(data)) + val += 64; + mutex_lock(&data->update_lock); data->temp_min[nr] = TEMP_TO_REG(val); lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]); @@ -708,6 +721,9 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); + if (IS_ADT7468_OFF64(data)) + val += 64; + mutex_lock(&data->update_lock); data->temp_max[nr] = TEMP_TO_REG(val); lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]); @@ -1163,6 +1179,10 @@ static int lm85_detect(struct i2c_client *client, int kind, case LM85_VERSTEP_ADT7463C: kind = adt7463; break; + case LM85_VERSTEP_ADT7468_1: + case LM85_VERSTEP_ADT7468_2: + kind = adt7468; + break; } } else if (company == LM85_COMPANY_SMSC) { switch (verstep) { @@ -1195,6 +1215,9 @@ static int lm85_detect(struct i2c_client *client, int kind, case adt7463: type_name = "adt7463"; break; + case adt7468: + type_name = "adt7468"; + break; case emc6d100: type_name = "emc6d100"; break; @@ -1246,10 +1269,11 @@ static int lm85_probe(struct i2c_client *client, if (err) goto err_kfree; - /* The ADT7463 has an optional VRM 10 mode where pin 21 is used + /* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used as a sixth digital VID input rather than an analog input. */ data->vid = lm85_read_value(client, LM85_REG_VID); - if (!(data->type == adt7463 && (data->vid & 0x80))) + if (!((data->type == adt7463 || data->type == adt7468) && + (data->vid & 0x80))) if ((err = sysfs_create_group(&client->dev.kobj, &lm85_group_in4))) goto err_remove_files; @@ -1357,7 +1381,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) * There are 2 additional resolution bits per channel and we * have room for 4, so we shift them to the left. */ - if (data->type == adm1027 || data->type == adt7463) { + if (data->type == adm1027 || data->type == adt7463 || + data->type == adt7468) { int ext1 = lm85_read_value(client, ADM1027_REG_EXTEND_ADC1); int ext2 = lm85_read_value(client, @@ -1382,16 +1407,23 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_FAN(i)); } - if (!(data->type == adt7463 && (data->vid & 0x80))) { + if (!((data->type == adt7463 || data->type == adt7468) && + (data->vid & 0x80))) { data->in[4] = lm85_read_value(client, LM85_REG_IN(4)); } + if (data->type == adt7468) + data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5); + for (i = 0; i <= 2; ++i) { data->temp[i] = lm85_read_value(client, LM85_REG_TEMP(i)); data->pwm[i] = lm85_read_value(client, LM85_REG_PWM(i)); + + if (IS_ADT7468_OFF64(data)) + data->temp[i] -= 64; } data->alarms = lm85_read_value(client, LM85_REG_ALARM1); @@ -1446,7 +1478,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_FAN_MIN(i)); } - if (!(data->type == adt7463 && (data->vid & 0x80))) { + if (!((data->type == adt7463 || data->type == adt7468) && + (data->vid & 0x80))) { data->in_min[4] = lm85_read_value(client, LM85_REG_IN_MIN(4)); data->in_max[4] = lm85_read_value(client, @@ -1481,6 +1514,13 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_AFAN_LIMIT(i)); data->zone[i].critical = lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i)); + + if (IS_ADT7468_OFF64(data)) { + data->temp_min[i] -= 64; + data->temp_max[i] -= 64; + data->zone[i].limit -= 64; + data->zone[i].critical -= 64; + } } i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); -- cgit v1.2.3-70-g09d2 From 50d7d5bf3168db5d04566dd7ffb9a820e9fdf484 Mon Sep 17 00:00:00 2001 From: Jean-Christophe Lallemand Date: Wed, 12 Nov 2008 13:27:00 -0800 Subject: atmel_spi: work-around required for new HW bug in AT91SAM9263 Rev.B SPI controller We're working with an AT91SAM9263 Rev B in our design and I experienced some inconsistency in spi-based touchscreen usage between our board and the Atmel evaluation kit we have that runs on a Rev A chip. The data was apparently delayed by 1 byte and got ridiculous data out of the touchscreen driver, very strange. As everything looked normal in the spi, touchscreen and dma logs, I contacted the Atmel support and they triggered me on a new HW bug that appeared in the Rev B SPI controller. The problem is that the SPI controller on the Rev B needs that the software reset is performed two times so that it's performed correctly. Applying the patch below solves the issue on my Rev B board. I've tested it as well on my Rev A evaluation kit and it has apparently no unwanted side effect, things continue to work as expected. Signed-off-by: Haavard Skinnemoen Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/atmel_spi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 02f9320f3ef..8abae4ad0fa 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -766,6 +766,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev) /* Initialize the hardware */ clk_enable(clk); spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS)); spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); spi_writel(as, CR, SPI_BIT(SPIEN)); @@ -782,6 +783,7 @@ static int __init atmel_spi_probe(struct platform_device *pdev) out_reset_hw: spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ clk_disable(clk); free_irq(irq, master); out_unmap_regs: @@ -805,6 +807,7 @@ static int __exit atmel_spi_remove(struct platform_device *pdev) spin_lock_irq(&as->lock); as->stopping = 1; spi_writel(as, CR, SPI_BIT(SWRST)); + spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ spi_readl(as, SR); spin_unlock_irq(&as->lock); -- cgit v1.2.3-70-g09d2 From 6cdfcc275e40b89fb020da1088ead86a61d33115 Mon Sep 17 00:00:00 2001 From: Theodore Tso Date: Wed, 12 Nov 2008 13:27:01 -0800 Subject: ext3: Clean up outdated and incorrect comment for ext3_write_super() Signed-off-by: "Theodore Ts'o" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ext3/super.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 5dec6d1356c..f6c94f232ec 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -2375,12 +2375,9 @@ int ext3_force_commit(struct super_block *sb) /* * Ext3 always journals updates to the superblock itself, so we don't * have to propagate any other updates to the superblock on disk at this - * point. Just start an async writeback to get the buffers on their way - * to the disk. - * - * This implicitly triggers the writebehind on sync(). + * point. (We can probably nuke this function altogether, and remove + * any mention to sb->s_dirt in all of fs/ext3; eventual cleanup...) */ - static void ext3_write_super (struct super_block * sb) { if (mutex_trylock(&sb->s_lock) != 0) -- cgit v1.2.3-70-g09d2 From 33c5d3d64589c5d379db5a5615735f6d08438369 Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Wed, 12 Nov 2008 13:27:01 -0800 Subject: memcg: bugfix for memory hotplug The start pfn calculation in page_cgroup's memory hotplug notifier chain is wrong. Tested-by: Badari Pulavarty Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_cgroup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c index f59d797dc5a..1223d927904 100644 --- a/mm/page_cgroup.c +++ b/mm/page_cgroup.c @@ -165,7 +165,7 @@ int online_page_cgroup(unsigned long start_pfn, unsigned long start, end, pfn; int fail = 0; - start = start_pfn & (PAGES_PER_SECTION - 1); + start = start_pfn & ~(PAGES_PER_SECTION - 1); end = ALIGN(start_pfn + nr_pages, PAGES_PER_SECTION); for (pfn = start; !fail && pfn < end; pfn += PAGES_PER_SECTION) { @@ -188,7 +188,7 @@ int offline_page_cgroup(unsigned long start_pfn, { unsigned long start, end, pfn; - start = start_pfn & (PAGES_PER_SECTION - 1); + start = start_pfn & ~(PAGES_PER_SECTION - 1); end = ALIGN(start_pfn + nr_pages, PAGES_PER_SECTION); for (pfn = start; pfn < end; pfn += PAGES_PER_SECTION) -- cgit v1.2.3-70-g09d2 From 455fbdd376c3ed3a5be8c039348896fdd87e9930 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 12 Nov 2008 13:27:02 -0800 Subject: LIS3LV02Dx Accelerometer driver This adds a driver to the accelerometer sensor found in several HP laptops (under the commercial names of "HP Mobile Data Protection System 3D" and "HP 3D driveguard"). It tries to have more or less the same interfaces as the hdaps and other accelerometer drivers: in sysfs and as a joystick. This driver was first written by Yan Burman. Eric Piel has updated it and slimed it up (including the removal of an interface to access to the free-fall feature of the sensor because it is not reliable enough for now). Pavel Machek removed few more features and switched locking from semaphore to mutex. Several people have contributed to the database of the axes. [eric.piel@tremplin-utc.net: LIS3LV02D: Conform to the new ACPI API] Signed-off-by: Eric Piel Signed-off-by: Yan Burman Signed-off-by: Pavel Machek Cc: "Mark M. Hoffman" Signed-off-by: Eric Piel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/hwmon/lis3lv02d | 49 ++++ MAINTAINERS | 5 + drivers/hwmon/Kconfig | 19 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/lis3lv02d.c | 582 ++++++++++++++++++++++++++++++++++++++++++ drivers/hwmon/lis3lv02d.h | 149 +++++++++++ 6 files changed, 805 insertions(+) create mode 100644 Documentation/hwmon/lis3lv02d create mode 100644 drivers/hwmon/lis3lv02d.c create mode 100644 drivers/hwmon/lis3lv02d.h diff --git a/Documentation/hwmon/lis3lv02d b/Documentation/hwmon/lis3lv02d new file mode 100644 index 00000000000..65dfb0c0fd6 --- /dev/null +++ b/Documentation/hwmon/lis3lv02d @@ -0,0 +1,49 @@ +Kernel driver lis3lv02d +================== + +Supported chips: + + * STMicroelectronics LIS3LV02DL and LIS3LV02DQ + +Author: + Yan Burman + Eric Piel + + +Description +----------- + +This driver provides support for the accelerometer found in various HP laptops +sporting the feature officially called "HP Mobile Data Protection System 3D" or +"HP 3D DriveGuard". It detect automatically laptops with this sensor. Known models +(for now the HP 2133, nc6420, nc2510, nc8510, nc84x0, nw9440 and nx9420) will +have their axis automatically oriented on standard way (eg: you can directly +play neverball). The accelerometer data is readable via +/sys/devices/platform/lis3lv02d. + +Sysfs attributes under /sys/devices/platform/lis3lv02d/: +position - 3D position that the accelerometer reports. Format: "(x,y,z)" +calibrate - read: values (x, y, z) that are used as the base for input class device operation. + write: forces the base to be recalibrated with the current position. +rate - reports the sampling rate of the accelerometer device in HZ + +This driver also provides an absolute input class device, allowing +the laptop to act as a pinball machine-esque joystick. + +Axes orientation +---------------- + +For better compatibility between the various laptops. The values reported by +the accelerometer are converted into a "standard" organisation of the axes +(aka "can play neverball out of the box"): + * When the laptop is horizontal the position reported is about 0 for X and Y +and a positive value for Z + * If the left side is elevated, X increases (becomes positive) + * If the front side (where the touchpad is) is elevated, Y decreases (becomes negative) + * If the laptop is put upside-down, Z becomes negative + +If your laptop model is not recognized (cf "dmesg"), you can send an email to the +authors to add it to the database. When reporting a new laptop, please include +the output of "dmidecode" plus the value of /sys/devices/platform/lis3lv02d/position +in these four cases. + diff --git a/MAINTAINERS b/MAINTAINERS index 272d04e95fa..8e0777fae3c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2703,6 +2703,11 @@ P: Arnaldo Carvalho de Melo M: acme@ghostprotocols.net S: Maintained +LIS3LV02D ACCELEROMETER DRIVER +P: Eric Piel +M: eric.piel@tremplin-utc.net +S: Maintained + LM83 HARDWARE MONITOR DRIVER P: Jean Delvare M: khali@linux-fr.org diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 6de1e0ffd39..1c44f5c47aa 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -825,6 +825,25 @@ config SENSORS_HDAPS Say Y here if you have an applicable laptop and want to experience the awesome power of hdaps. +config SENSORS_LIS3LV02D + tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer" + depends on ACPI && INPUT + default n + help + This driver provides support for the LIS3LV02Dx accelerometer. In + particular, it can be found in a number of HP laptops, which have the + "Mobile Data Protection System 3D" or "3D DriveGuard" feature. On such + systems the driver should load automatically (via ACPI). The + accelerometer might also be found in other systems, connected via SPI + or I2C. The accelerometer data is readable via + /sys/devices/platform/lis3lv02d. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + This driver can also be built as a module. If so, the module + will be called lis3lv02d. + config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" depends on INPUT && X86 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 042d5a78622..e0d90a68bea 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o +obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o obj-$(CONFIG_SENSORS_LM75) += lm75.o diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c new file mode 100644 index 00000000000..752b5c44df9 --- /dev/null +++ b/drivers/hwmon/lis3lv02d.c @@ -0,0 +1,582 @@ +/* + * lis3lv02d.c - ST LIS3LV02DL accelerometer driver + * + * Copyright (C) 2007-2008 Yan Burman + * Copyright (C) 2008 Eric Piel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "lis3lv02d.h" + +#define DRIVER_NAME "lis3lv02d" +#define ACPI_MDPS_CLASS "accelerometer" + +/* joystick device poll interval in milliseconds */ +#define MDPS_POLL_INTERVAL 50 +/* + * The sensor can also generate interrupts (DRDY) but it's pretty pointless + * because their are generated even if the data do not change. So it's better + * to keep the interrupt for the free-fall event. The values are updated at + * 40Hz (at the lowest frequency), but as it can be pretty time consuming on + * some low processor, we poll the sensor only at 20Hz... enough for the + * joystick. + */ + +/* Maximum value our axis may get for the input device (signed 12 bits) */ +#define MDPS_MAX_VAL 2048 + +struct axis_conversion { + s8 x; + s8 y; + s8 z; +}; + +struct acpi_lis3lv02d { + struct acpi_device *device; /* The ACPI device */ + struct input_dev *idev; /* input device */ + struct task_struct *kthread; /* kthread for input */ + struct mutex lock; + struct platform_device *pdev; /* platform device */ + atomic_t count; /* interrupt count after last read */ + int xcalib; /* calibrated null value for x */ + int ycalib; /* calibrated null value for y */ + int zcalib; /* calibrated null value for z */ + unsigned char is_on; /* whether the device is on or off */ + unsigned char usage; /* usage counter */ + struct axis_conversion ac; /* hw -> logical axis */ +}; + +static struct acpi_lis3lv02d adev; + +static int lis3lv02d_remove_fs(void); +static int lis3lv02d_add_fs(struct acpi_device *device); + +/* For automatic insertion of the module */ +static struct acpi_device_id lis3lv02d_device_ids[] = { + {"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */ + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, lis3lv02d_device_ids); + +/** + * lis3lv02d_acpi_init - ACPI _INI method: initialize the device. + * @handle: the handle of the device + * + * Returns AE_OK on success. + */ +static inline acpi_status lis3lv02d_acpi_init(acpi_handle handle) +{ + return acpi_evaluate_object(handle, METHOD_NAME__INI, NULL, NULL); +} + +/** + * lis3lv02d_acpi_read - ACPI ALRD method: read a register + * @handle: the handle of the device + * @reg: the register to read + * @ret: result of the operation + * + * Returns AE_OK on success. + */ +static acpi_status lis3lv02d_acpi_read(acpi_handle handle, int reg, u8 *ret) +{ + union acpi_object arg0 = { ACPI_TYPE_INTEGER }; + struct acpi_object_list args = { 1, &arg0 }; + unsigned long long lret; + acpi_status status; + + arg0.integer.value = reg; + + status = acpi_evaluate_integer(handle, "ALRD", &args, &lret); + *ret = lret; + return status; +} + +/** + * lis3lv02d_acpi_write - ACPI ALWR method: write to a register + * @handle: the handle of the device + * @reg: the register to write to + * @val: the value to write + * + * Returns AE_OK on success. + */ +static acpi_status lis3lv02d_acpi_write(acpi_handle handle, int reg, u8 val) +{ + unsigned long long ret; /* Not used when writting */ + union acpi_object in_obj[2]; + struct acpi_object_list args = { 2, in_obj }; + + in_obj[0].type = ACPI_TYPE_INTEGER; + in_obj[0].integer.value = reg; + in_obj[1].type = ACPI_TYPE_INTEGER; + in_obj[1].integer.value = val; + + return acpi_evaluate_integer(handle, "ALWR", &args, &ret); +} + +static s16 lis3lv02d_read_16(acpi_handle handle, int reg) +{ + u8 lo, hi; + + lis3lv02d_acpi_read(handle, reg, &lo); + lis3lv02d_acpi_read(handle, reg + 1, &hi); + /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */ + return (s16)((hi << 8) | lo); +} + +/** + * lis3lv02d_get_axis - For the given axis, give the value converted + * @axis: 1,2,3 - can also be negative + * @hw_values: raw values returned by the hardware + * + * Returns the converted value. + */ +static inline int lis3lv02d_get_axis(s8 axis, int hw_values[3]) +{ + if (axis > 0) + return hw_values[axis - 1]; + else + return -hw_values[-axis - 1]; +} + +/** + * lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer + * @handle: the handle to the device + * @x: where to store the X axis value + * @y: where to store the Y axis value + * @z: where to store the Z axis value + * + * Note that 40Hz input device can eat up about 10% CPU at 800MHZ + */ +static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z) +{ + int position[3]; + + position[0] = lis3lv02d_read_16(handle, OUTX_L); + position[1] = lis3lv02d_read_16(handle, OUTY_L); + position[2] = lis3lv02d_read_16(handle, OUTZ_L); + + *x = lis3lv02d_get_axis(adev.ac.x, position); + *y = lis3lv02d_get_axis(adev.ac.y, position); + *z = lis3lv02d_get_axis(adev.ac.z, position); +} + +static inline void lis3lv02d_poweroff(acpi_handle handle) +{ + adev.is_on = 0; + /* disable X,Y,Z axis and power down */ + lis3lv02d_acpi_write(handle, CTRL_REG1, 0x00); +} + +static void lis3lv02d_poweron(acpi_handle handle) +{ + u8 val; + + adev.is_on = 1; + lis3lv02d_acpi_init(handle); + lis3lv02d_acpi_write(handle, FF_WU_CFG, 0); + /* + * BDU: LSB and MSB values are not updated until both have been read. + * So the value read will always be correct. + * IEN: Interrupt for free-fall and DD, not for data-ready. + */ + lis3lv02d_acpi_read(handle, CTRL_REG2, &val); + val |= CTRL2_BDU | CTRL2_IEN; + lis3lv02d_acpi_write(handle, CTRL_REG2, val); +} + +#ifdef CONFIG_PM +static int lis3lv02d_suspend(struct acpi_device *device, pm_message_t state) +{ + /* make sure the device is off when we suspend */ + lis3lv02d_poweroff(device->handle); + return 0; +} + +static int lis3lv02d_resume(struct acpi_device *device) +{ + /* put back the device in the right state (ACPI might turn it on) */ + mutex_lock(&adev.lock); + if (adev.usage > 0) + lis3lv02d_poweron(device->handle); + else + lis3lv02d_poweroff(device->handle); + mutex_unlock(&adev.lock); + return 0; +} +#else +#define lis3lv02d_suspend NULL +#define lis3lv02d_resume NULL +#endif + + +/* + * To be called before starting to use the device. It makes sure that the + * device will always be on until a call to lis3lv02d_decrease_use(). Not to be + * used from interrupt context. + */ +static void lis3lv02d_increase_use(struct acpi_lis3lv02d *dev) +{ + mutex_lock(&dev->lock); + dev->usage++; + if (dev->usage == 1) { + if (!dev->is_on) + lis3lv02d_poweron(dev->device->handle); + } + mutex_unlock(&dev->lock); +} + +/* + * To be called whenever a usage of the device is stopped. + * It will make sure to turn off the device when there is not usage. + */ +static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev) +{ + mutex_lock(&dev->lock); + dev->usage--; + if (dev->usage == 0) + lis3lv02d_poweroff(dev->device->handle); + mutex_unlock(&dev->lock); +} + +/** + * lis3lv02d_joystick_kthread - Kthread polling function + * @data: unused - here to conform to threadfn prototype + */ +static int lis3lv02d_joystick_kthread(void *data) +{ + int x, y, z; + + while (!kthread_should_stop()) { + lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z); + input_report_abs(adev.idev, ABS_X, x - adev.xcalib); + input_report_abs(adev.idev, ABS_Y, y - adev.ycalib); + input_report_abs(adev.idev, ABS_Z, z - adev.zcalib); + + input_sync(adev.idev); + + try_to_freeze(); + msleep_interruptible(MDPS_POLL_INTERVAL); + } + + return 0; +} + +static int lis3lv02d_joystick_open(struct input_dev *input) +{ + lis3lv02d_increase_use(&adev); + adev.kthread = kthread_run(lis3lv02d_joystick_kthread, NULL, "klis3lv02d"); + if (IS_ERR(adev.kthread)) { + lis3lv02d_decrease_use(&adev); + return PTR_ERR(adev.kthread); + } + + return 0; +} + +static void lis3lv02d_joystick_close(struct input_dev *input) +{ + kthread_stop(adev.kthread); + lis3lv02d_decrease_use(&adev); +} + + +static inline void lis3lv02d_calibrate_joystick(void) +{ + lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib); +} + +static int lis3lv02d_joystick_enable(void) +{ + int err; + + if (adev.idev) + return -EINVAL; + + adev.idev = input_allocate_device(); + if (!adev.idev) + return -ENOMEM; + + lis3lv02d_calibrate_joystick(); + + adev.idev->name = "ST LIS3LV02DL Accelerometer"; + adev.idev->phys = DRIVER_NAME "/input0"; + adev.idev->id.bustype = BUS_HOST; + adev.idev->id.vendor = 0; + adev.idev->dev.parent = &adev.pdev->dev; + adev.idev->open = lis3lv02d_joystick_open; + adev.idev->close = lis3lv02d_joystick_close; + + set_bit(EV_ABS, adev.idev->evbit); + input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + + err = input_register_device(adev.idev); + if (err) { + input_free_device(adev.idev); + adev.idev = NULL; + } + + return err; +} + +static void lis3lv02d_joystick_disable(void) +{ + if (!adev.idev) + return; + + input_unregister_device(adev.idev); + adev.idev = NULL; +} + + +/* + * Initialise the accelerometer and the various subsystems. + * Should be rather independant of the bus system. + */ +static int lis3lv02d_init_device(struct acpi_lis3lv02d *dev) +{ + mutex_init(&dev->lock); + lis3lv02d_add_fs(dev->device); + lis3lv02d_increase_use(dev); + + if (lis3lv02d_joystick_enable()) + printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n"); + + lis3lv02d_decrease_use(dev); + return 0; +} + +static int lis3lv02d_dmi_matched(const struct dmi_system_id *dmi) +{ + adev.ac = *((struct axis_conversion *)dmi->driver_data); + printk(KERN_INFO DRIVER_NAME ": hardware type %s found.\n", dmi->ident); + + return 1; +} + +/* Represents, for each axis seen by userspace, the corresponding hw axis (+1). + * If the value is negative, the opposite of the hw value is used. */ +static struct axis_conversion lis3lv02d_axis_normal = {1, 2, 3}; +static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3}; +static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3}; +static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3}; +static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3}; +static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3}; + +#define AXIS_DMI_MATCH(_ident, _name, _axis) { \ + .ident = _ident, \ + .callback = lis3lv02d_dmi_matched, \ + .matches = { \ + DMI_MATCH(DMI_PRODUCT_NAME, _name) \ + }, \ + .driver_data = &lis3lv02d_axis_##_axis \ +} +static struct dmi_system_id lis3lv02d_dmi_ids[] = { + /* product names are truncated to match all kinds of a same model */ + AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted), + AXIS_DMI_MATCH("NC84x0", "HP Compaq nc84", z_inverted), + AXIS_DMI_MATCH("NX9420", "HP Compaq nx9420", x_inverted), + AXIS_DMI_MATCH("NW9440", "HP Compaq nw9440", x_inverted), + AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted), + AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted), + AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left), + { NULL, } +/* Laptop models without axis info (yet): + * "NC651xx" "HP Compaq 651" + * "NC671xx" "HP Compaq 671" + * "NC6910" "HP Compaq 6910" + * HP Compaq 8710x Notebook PC / Mobile Workstation + * "NC2400" "HP Compaq nc2400" + * "NX74x0" "HP Compaq nx74" + * "NX6325" "HP Compaq nx6325" + * "NC4400" "HP Compaq nc4400" + */ +}; + +static int lis3lv02d_add(struct acpi_device *device) +{ + u8 val; + + if (!device) + return -EINVAL; + + adev.device = device; + strcpy(acpi_device_name(device), DRIVER_NAME); + strcpy(acpi_device_class(device), ACPI_MDPS_CLASS); + device->driver_data = &adev; + + lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val); + if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) { + printk(KERN_ERR DRIVER_NAME + ": Accelerometer chip not LIS3LV02D{L,Q}\n"); + } + + /* If possible use a "standard" axes order */ + if (dmi_check_system(lis3lv02d_dmi_ids) == 0) { + printk(KERN_INFO DRIVER_NAME ": laptop model unknown, " + "using default axes configuration\n"); + adev.ac = lis3lv02d_axis_normal; + } + + return lis3lv02d_init_device(&adev); +} + +static int lis3lv02d_remove(struct acpi_device *device, int type) +{ + if (!device) + return -EINVAL; + + lis3lv02d_joystick_disable(); + lis3lv02d_poweroff(device->handle); + + return lis3lv02d_remove_fs(); +} + + +/* Sysfs stuff */ +static ssize_t lis3lv02d_position_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int x, y, z; + + lis3lv02d_increase_use(&adev); + lis3lv02d_get_xyz(adev.device->handle, &x, &y, &z); + lis3lv02d_decrease_use(&adev); + return sprintf(buf, "(%d,%d,%d)\n", x, y, z); +} + +static ssize_t lis3lv02d_calibrate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "(%d,%d,%d)\n", adev.xcalib, adev.ycalib, adev.zcalib); +} + +static ssize_t lis3lv02d_calibrate_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + lis3lv02d_increase_use(&adev); + lis3lv02d_calibrate_joystick(); + lis3lv02d_decrease_use(&adev); + return count; +} + +/* conversion btw sampling rate and the register values */ +static int lis3lv02dl_df_val[4] = {40, 160, 640, 2560}; +static ssize_t lis3lv02d_rate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u8 ctrl; + int val; + + lis3lv02d_increase_use(&adev); + lis3lv02d_acpi_read(adev.device->handle, CTRL_REG1, &ctrl); + lis3lv02d_decrease_use(&adev); + val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4; + return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]); +} + +static DEVICE_ATTR(position, S_IRUGO, lis3lv02d_position_show, NULL); +static DEVICE_ATTR(calibrate, S_IRUGO|S_IWUSR, lis3lv02d_calibrate_show, + lis3lv02d_calibrate_store); +static DEVICE_ATTR(rate, S_IRUGO, lis3lv02d_rate_show, NULL); + +static struct attribute *lis3lv02d_attributes[] = { + &dev_attr_position.attr, + &dev_attr_calibrate.attr, + &dev_attr_rate.attr, + NULL +}; + +static struct attribute_group lis3lv02d_attribute_group = { + .attrs = lis3lv02d_attributes +}; + +static int lis3lv02d_add_fs(struct acpi_device *device) +{ + adev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0); + if (IS_ERR(adev.pdev)) + return PTR_ERR(adev.pdev); + + return sysfs_create_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group); +} + +static int lis3lv02d_remove_fs(void) +{ + sysfs_remove_group(&adev.pdev->dev.kobj, &lis3lv02d_attribute_group); + platform_device_unregister(adev.pdev); + return 0; +} + +/* For the HP MDPS aka 3D Driveguard */ +static struct acpi_driver lis3lv02d_driver = { + .name = DRIVER_NAME, + .class = ACPI_MDPS_CLASS, + .ids = lis3lv02d_device_ids, + .ops = { + .add = lis3lv02d_add, + .remove = lis3lv02d_remove, + .suspend = lis3lv02d_suspend, + .resume = lis3lv02d_resume, + } +}; + +static int __init lis3lv02d_init_module(void) +{ + int ret; + + if (acpi_disabled) + return -ENODEV; + + ret = acpi_bus_register_driver(&lis3lv02d_driver); + if (ret < 0) + return ret; + + printk(KERN_INFO DRIVER_NAME " driver loaded.\n"); + + return 0; +} + +static void __exit lis3lv02d_exit_module(void) +{ + acpi_bus_unregister_driver(&lis3lv02d_driver); +} + +MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver"); +MODULE_AUTHOR("Yan Burman and Eric Piel"); +MODULE_LICENSE("GPL"); + +module_init(lis3lv02d_init_module); +module_exit(lis3lv02d_exit_module); diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h new file mode 100644 index 00000000000..330cfc60e94 --- /dev/null +++ b/drivers/hwmon/lis3lv02d.h @@ -0,0 +1,149 @@ +/* + * lis3lv02d.h - ST LIS3LV02DL accelerometer driver + * + * Copyright (C) 2007-2008 Yan Burman + * Copyright (C) 2008 Eric Piel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to + * be connected via SPI. There exists also several similar chips (such as LIS302DL or + * LIS3L02DQ) but not in the HP laptops and they have slightly different registers. + * They can also be connected via I²C. + */ + +#define LIS3LV02DL_ID 0x3A /* Also the LIS3LV02DQ */ +#define LIS302DL_ID 0x3B /* Also the LIS202DL! */ + +enum lis3lv02d_reg { + WHO_AM_I = 0x0F, + OFFSET_X = 0x16, + OFFSET_Y = 0x17, + OFFSET_Z = 0x18, + GAIN_X = 0x19, + GAIN_Y = 0x1A, + GAIN_Z = 0x1B, + CTRL_REG1 = 0x20, + CTRL_REG2 = 0x21, + CTRL_REG3 = 0x22, + HP_FILTER_RESET = 0x23, + STATUS_REG = 0x27, + OUTX_L = 0x28, + OUTX_H = 0x29, + OUTY_L = 0x2A, + OUTY_H = 0x2B, + OUTZ_L = 0x2C, + OUTZ_H = 0x2D, + FF_WU_CFG = 0x30, + FF_WU_SRC = 0x31, + FF_WU_ACK = 0x32, + FF_WU_THS_L = 0x34, + FF_WU_THS_H = 0x35, + FF_WU_DURATION = 0x36, + DD_CFG = 0x38, + DD_SRC = 0x39, + DD_ACK = 0x3A, + DD_THSI_L = 0x3C, + DD_THSI_H = 0x3D, + DD_THSE_L = 0x3E, + DD_THSE_H = 0x3F, +}; + +enum lis3lv02d_ctrl1 { + CTRL1_Xen = 0x01, + CTRL1_Yen = 0x02, + CTRL1_Zen = 0x04, + CTRL1_ST = 0x08, + CTRL1_DF0 = 0x10, + CTRL1_DF1 = 0x20, + CTRL1_PD0 = 0x40, + CTRL1_PD1 = 0x80, +}; +enum lis3lv02d_ctrl2 { + CTRL2_DAS = 0x01, + CTRL2_SIM = 0x02, + CTRL2_DRDY = 0x04, + CTRL2_IEN = 0x08, + CTRL2_BOOT = 0x10, + CTRL2_BLE = 0x20, + CTRL2_BDU = 0x40, /* Block Data Update */ + CTRL2_FS = 0x80, /* Full Scale selection */ +}; + + +enum lis3lv02d_ctrl3 { + CTRL3_CFS0 = 0x01, + CTRL3_CFS1 = 0x02, + CTRL3_FDS = 0x10, + CTRL3_HPFF = 0x20, + CTRL3_HPDD = 0x40, + CTRL3_ECK = 0x80, +}; + +enum lis3lv02d_status_reg { + STATUS_XDA = 0x01, + STATUS_YDA = 0x02, + STATUS_ZDA = 0x04, + STATUS_XYZDA = 0x08, + STATUS_XOR = 0x10, + STATUS_YOR = 0x20, + STATUS_ZOR = 0x40, + STATUS_XYZOR = 0x80, +}; + +enum lis3lv02d_ff_wu_cfg { + FF_WU_CFG_XLIE = 0x01, + FF_WU_CFG_XHIE = 0x02, + FF_WU_CFG_YLIE = 0x04, + FF_WU_CFG_YHIE = 0x08, + FF_WU_CFG_ZLIE = 0x10, + FF_WU_CFG_ZHIE = 0x20, + FF_WU_CFG_LIR = 0x40, + FF_WU_CFG_AOI = 0x80, +}; + +enum lis3lv02d_ff_wu_src { + FF_WU_SRC_XL = 0x01, + FF_WU_SRC_XH = 0x02, + FF_WU_SRC_YL = 0x04, + FF_WU_SRC_YH = 0x08, + FF_WU_SRC_ZL = 0x10, + FF_WU_SRC_ZH = 0x20, + FF_WU_SRC_IA = 0x40, +}; + +enum lis3lv02d_dd_cfg { + DD_CFG_XLIE = 0x01, + DD_CFG_XHIE = 0x02, + DD_CFG_YLIE = 0x04, + DD_CFG_YHIE = 0x08, + DD_CFG_ZLIE = 0x10, + DD_CFG_ZHIE = 0x20, + DD_CFG_LIR = 0x40, + DD_CFG_IEND = 0x80, +}; + +enum lis3lv02d_dd_src { + DD_SRC_XL = 0x01, + DD_SRC_XH = 0x02, + DD_SRC_YL = 0x04, + DD_SRC_YH = 0x08, + DD_SRC_ZL = 0x10, + DD_SRC_ZH = 0x20, + DD_SRC_IA = 0x40, +}; + -- cgit v1.2.3-70-g09d2 From c0b4e3ab0c769913438aeb078535ff117eeba5fb Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:27:03 -0800 Subject: adt7462: new hwmon driver New driver to play with. As Jean mentioned a couple of years ago, this chip is a beast with odd combinations of 8 fans, 4 temperatures, and 13 voltage sensors. This driver has been tested on an IntelliStation Z30. Signed-off-by: Darrick J. Wong Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/hwmon/adt7462 | 67 ++ drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/adt7462.c | 2002 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 2080 insertions(+) create mode 100644 Documentation/hwmon/adt7462 create mode 100644 drivers/hwmon/adt7462.c diff --git a/Documentation/hwmon/adt7462 b/Documentation/hwmon/adt7462 new file mode 100644 index 00000000000..ec660b32827 --- /dev/null +++ b/Documentation/hwmon/adt7462 @@ -0,0 +1,67 @@ +Kernel driver adt7462 +====================== + +Supported chips: + * Analog Devices ADT7462 + Prefix: 'adt7462' + Addresses scanned: I2C 0x58, 0x5C + Datasheet: Publicly available at the Analog Devices website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the Analog Devices ADT7462 chip family. + +This chip is a bit of a beast. It has 8 counters for measuring fan speed. It +can also measure 13 voltages or 4 temperatures, or various combinations of the +two. See the chip documentation for more details about the exact set of +configurations. This driver does not allow one to configure the chip; that is +left to the system designer. + +A sophisticated control system for the PWM outputs is designed into the ADT7462 +that allows fan speed to be adjusted automatically based on any of the three +temperature sensors. Each PWM output is individually adjustable and +programmable. Once configured, the ADT7462 will adjust the PWM outputs in +response to the measured temperatures without further host intervention. This +feature can also be disabled for manual control of the PWM's. + +Each of the measured inputs (voltage, temperature, fan speed) has +corresponding high/low limit values. The ADT7462 will signal an ALARM if +any measured value exceeds either limit. + +The ADT7462 samples all inputs continuously. The driver will not read +the registers more often than once every other second. Further, +configuration data is only read once per minute. + +Special Features +---------------- + +The ADT7462 have a 10-bit ADC and can therefore measure temperatures +with 0.25 degC resolution. + +The Analog Devices datasheet is very detailed and describes a procedure for +determining an optimal configuration for the automatic PWM control. + +The driver will report sensor labels when it is able to determine that +information from the configuration registers. + +Configuration Notes +------------------- + +Besides standard interfaces driver adds the following: + +* PWM Control + +* pwm#_auto_point1_pwm and temp#_auto_point1_temp and +* pwm#_auto_point2_pwm and temp#_auto_point2_temp - + +point1: Set the pwm speed at a lower temperature bound. +point2: Set the pwm speed at a higher temperature bound. + +The ADT7462 will scale the pwm between the lower and higher pwm speed when +the temperature is between the two temperature boundaries. PWM values range +from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the +temperature sensor associated with the PWM control exceeds temp#_max. + diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 1c44f5c47aa..c709e821f04 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -159,6 +159,16 @@ config SENSORS_ADM9240 This driver can also be built as a module. If so, the module will be called adm9240. +config SENSORS_ADT7462 + tristate "Analog Devices ADT7462" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + ADT7462 temperature monitoring chips. + + This driver can also be built as a module. If so, the module + will be called adt7462. + config SENSORS_ADT7470 tristate "Analog Devices ADT7470" depends on I2C && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index e0d90a68bea..58fc5be5355 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o +obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o obj-$(CONFIG_SENSORS_ADT7473) += adt7473.o obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c new file mode 100644 index 00000000000..66107b4dc12 --- /dev/null +++ b/drivers/hwmon/adt7462.c @@ -0,0 +1,2002 @@ +/* + * A hwmon driver for the Analog Devices ADT7462 + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(adt7462); + +/* ADT7462 registers */ +#define ADT7462_REG_DEVICE 0x3D +#define ADT7462_REG_VENDOR 0x3E +#define ADT7462_REG_REVISION 0x3F + +#define ADT7462_REG_MIN_TEMP_BASE_ADDR 0x44 +#define ADT7462_REG_MIN_TEMP_MAX_ADDR 0x47 +#define ADT7462_REG_MAX_TEMP_BASE_ADDR 0x48 +#define ADT7462_REG_MAX_TEMP_MAX_ADDR 0x4B +#define ADT7462_REG_TEMP_BASE_ADDR 0x88 +#define ADT7462_REG_TEMP_MAX_ADDR 0x8F + +#define ADT7462_REG_FAN_BASE_ADDR 0x98 +#define ADT7462_REG_FAN_MAX_ADDR 0x9F +#define ADT7462_REG_FAN2_BASE_ADDR 0xA2 +#define ADT7462_REG_FAN2_MAX_ADDR 0xA9 +#define ADT7462_REG_FAN_ENABLE 0x07 +#define ADT7462_REG_FAN_MIN_BASE_ADDR 0x78 +#define ADT7462_REG_FAN_MIN_MAX_ADDR 0x7F + +#define ADT7462_REG_CFG2 0x02 +#define ADT7462_FSPD_MASK 0x20 + +#define ADT7462_REG_PWM_BASE_ADDR 0xAA +#define ADT7462_REG_PWM_MAX_ADDR 0xAD +#define ADT7462_REG_PWM_MIN_BASE_ADDR 0x28 +#define ADT7462_REG_PWM_MIN_MAX_ADDR 0x2B +#define ADT7462_REG_PWM_MAX 0x2C +#define ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR 0x5C +#define ADT7462_REG_PWM_TEMP_MIN_MAX_ADDR 0x5F +#define ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR 0x60 +#define ADT7462_REG_PWM_TEMP_RANGE_MAX_ADDR 0x63 +#define ADT7462_PWM_HYST_MASK 0x0F +#define ADT7462_PWM_RANGE_MASK 0xF0 +#define ADT7462_PWM_RANGE_SHIFT 4 +#define ADT7462_REG_PWM_CFG_BASE_ADDR 0x21 +#define ADT7462_REG_PWM_CFG_MAX_ADDR 0x24 +#define ADT7462_PWM_CHANNEL_MASK 0xE0 +#define ADT7462_PWM_CHANNEL_SHIFT 5 + +#define ADT7462_REG_PIN_CFG_BASE_ADDR 0x10 +#define ADT7462_REG_PIN_CFG_MAX_ADDR 0x13 +#define ADT7462_PIN7_INPUT 0x01 /* cfg0 */ +#define ADT7462_DIODE3_INPUT 0x20 +#define ADT7462_DIODE1_INPUT 0x40 +#define ADT7462_VID_INPUT 0x80 +#define ADT7462_PIN22_INPUT 0x04 /* cfg1 */ +#define ADT7462_PIN21_INPUT 0x08 +#define ADT7462_PIN19_INPUT 0x10 +#define ADT7462_PIN15_INPUT 0x20 +#define ADT7462_PIN13_INPUT 0x40 +#define ADT7462_PIN8_INPUT 0x80 +#define ADT7462_PIN23_MASK 0x03 +#define ADT7462_PIN23_SHIFT 0 +#define ADT7462_PIN26_MASK 0x0C /* cfg2 */ +#define ADT7462_PIN26_SHIFT 2 +#define ADT7462_PIN25_MASK 0x30 +#define ADT7462_PIN25_SHIFT 4 +#define ADT7462_PIN24_MASK 0xC0 +#define ADT7462_PIN24_SHIFT 6 +#define ADT7462_PIN26_VOLT_INPUT 0x08 +#define ADT7462_PIN25_VOLT_INPUT 0x20 +#define ADT7462_PIN28_SHIFT 6 /* cfg3 */ +#define ADT7462_PIN28_VOLT 0x5 + +#define ADT7462_REG_ALARM1 0xB8 +#define ADT7462_LT_ALARM 0x02 +#define ADT7462_R1T_ALARM 0x04 +#define ADT7462_R2T_ALARM 0x08 +#define ADT7462_R3T_ALARM 0x10 +#define ADT7462_REG_ALARM2 0xBB +#define ADT7462_V0_ALARM 0x01 +#define ADT7462_V1_ALARM 0x02 +#define ADT7462_V2_ALARM 0x04 +#define ADT7462_V3_ALARM 0x08 +#define ADT7462_V4_ALARM 0x10 +#define ADT7462_V5_ALARM 0x20 +#define ADT7462_V6_ALARM 0x40 +#define ADT7462_V7_ALARM 0x80 +#define ADT7462_REG_ALARM3 0xBC +#define ADT7462_V8_ALARM 0x08 +#define ADT7462_V9_ALARM 0x10 +#define ADT7462_V10_ALARM 0x20 +#define ADT7462_V11_ALARM 0x40 +#define ADT7462_V12_ALARM 0x80 +#define ADT7462_REG_ALARM4 0xBD +#define ADT7462_F0_ALARM 0x01 +#define ADT7462_F1_ALARM 0x02 +#define ADT7462_F2_ALARM 0x04 +#define ADT7462_F3_ALARM 0x08 +#define ADT7462_F4_ALARM 0x10 +#define ADT7462_F5_ALARM 0x20 +#define ADT7462_F6_ALARM 0x40 +#define ADT7462_F7_ALARM 0x80 +#define ADT7462_ALARM1 0x0000 +#define ADT7462_ALARM2 0x0100 +#define ADT7462_ALARM3 0x0200 +#define ADT7462_ALARM4 0x0300 +#define ADT7462_ALARM_REG_SHIFT 8 +#define ADT7462_ALARM_FLAG_MASK 0x0F + +#define ADT7462_TEMP_COUNT 4 +#define ADT7462_TEMP_REG(x) (ADT7462_REG_TEMP_BASE_ADDR + (x * 2)) +#define ADT7462_TEMP_MIN_REG(x) (ADT7462_REG_MIN_TEMP_BASE_ADDR + (x)) +#define ADT7462_TEMP_MAX_REG(x) (ADT7462_REG_MAX_TEMP_BASE_ADDR + (x)) +#define TEMP_FRAC_OFFSET 6 + +#define ADT7462_FAN_COUNT 8 +#define ADT7462_REG_FAN_MIN(x) (ADT7462_REG_FAN_MIN_BASE_ADDR + (x)) + +#define ADT7462_PWM_COUNT 4 +#define ADT7462_REG_PWM(x) (ADT7462_REG_PWM_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_MIN(x) (ADT7462_REG_PWM_MIN_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_TMIN(x) \ + (ADT7462_REG_PWM_TEMP_MIN_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_TRANGE(x) \ + (ADT7462_REG_PWM_TEMP_RANGE_BASE_ADDR + (x)) + +#define ADT7462_PIN_CFG_REG_COUNT 4 +#define ADT7462_REG_PIN_CFG(x) (ADT7462_REG_PIN_CFG_BASE_ADDR + (x)) +#define ADT7462_REG_PWM_CFG(x) (ADT7462_REG_PWM_CFG_BASE_ADDR + (x)) + +#define ADT7462_ALARM_REG_COUNT 4 + +/* + * The chip can measure 13 different voltage sources: + * + * 1. +12V1 (pin 7) + * 2. Vccp1/+2.5V/+1.8V/+1.5V (pin 23) + * 3. +12V3 (pin 22) + * 4. +5V (pin 21) + * 5. +1.25V/+0.9V (pin 19) + * 6. +2.5V/+1.8V (pin 15) + * 7. +3.3v (pin 13) + * 8. +12V2 (pin 8) + * 9. Vbatt/FSB_Vtt (pin 26) + * A. +3.3V/+1.2V1 (pin 25) + * B. Vccp2/+2.5V/+1.8V/+1.5V (pin 24) + * C. +1.5V ICH (only if BOTH pin 28/29 are set to +1.5V) + * D. +1.5V 3GPIO (only if BOTH pin 28/29 are set to +1.5V) + * + * Each of these 13 has a factor to convert raw to voltage. Even better, + * the pins can be connected to other sensors (tach/gpio/hot/etc), which + * makes the bookkeeping tricky. + * + * Some, but not all, of these voltages have low/high limits. + */ +#define ADT7462_VOLT_COUNT 12 + +#define ADT7462_VENDOR 0x41 +#define ADT7462_DEVICE 0x62 +/* datasheet only mentions a revision 4 */ +#define ADT7462_REVISION 0x04 + +/* How often do we reread sensors values? (In jiffies) */ +#define SENSOR_REFRESH_INTERVAL (2 * HZ) + +/* How often do we reread sensor limit values? (In jiffies) */ +#define LIMIT_REFRESH_INTERVAL (60 * HZ) + +/* datasheet says to divide this number by the fan reading to get fan rpm */ +#define FAN_PERIOD_TO_RPM(x) ((90000 * 60) / (x)) +#define FAN_RPM_TO_PERIOD FAN_PERIOD_TO_RPM +#define FAN_PERIOD_INVALID 65535 +#define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) + +#define MASK_AND_SHIFT(value, prefix) \ + (((value) & prefix##_MASK) >> prefix##_SHIFT) + +#define ROUND_DIV(x, divisor) (((x) + ((divisor) / 2)) / (divisor)) + +struct adt7462_data { + struct device *hwmon_dev; + struct attribute_group attrs; + struct mutex lock; + char sensors_valid; + char limits_valid; + unsigned long sensors_last_updated; /* In jiffies */ + unsigned long limits_last_updated; /* In jiffies */ + + u8 temp[ADT7462_TEMP_COUNT]; + /* bits 6-7 are quarter pieces of temp */ + u8 temp_frac[ADT7462_TEMP_COUNT]; + u8 temp_min[ADT7462_TEMP_COUNT]; + u8 temp_max[ADT7462_TEMP_COUNT]; + u16 fan[ADT7462_FAN_COUNT]; + u8 fan_enabled; + u8 fan_min[ADT7462_FAN_COUNT]; + u8 cfg2; + u8 pwm[ADT7462_PWM_COUNT]; + u8 pin_cfg[ADT7462_PIN_CFG_REG_COUNT]; + u8 voltages[ADT7462_VOLT_COUNT]; + u8 volt_max[ADT7462_VOLT_COUNT]; + u8 volt_min[ADT7462_VOLT_COUNT]; + u8 pwm_min[ADT7462_PWM_COUNT]; + u8 pwm_tmin[ADT7462_PWM_COUNT]; + u8 pwm_trange[ADT7462_PWM_COUNT]; + u8 pwm_max; /* only one per chip */ + u8 pwm_cfg[ADT7462_PWM_COUNT]; + u8 alarms[ADT7462_ALARM_REG_COUNT]; +}; + +static int adt7462_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adt7462_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int adt7462_remove(struct i2c_client *client); + +static const struct i2c_device_id adt7462_id[] = { + { "adt7462", adt7462 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adt7462_id); + +static struct i2c_driver adt7462_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "adt7462", + }, + .probe = adt7462_probe, + .remove = adt7462_remove, + .id_table = adt7462_id, + .detect = adt7462_detect, + .address_data = &addr_data, +}; + +/* + * 16-bit registers on the ADT7462 are low-byte first. The data sheet says + * that the low byte must be read before the high byte. + */ +static inline int adt7462_read_word_data(struct i2c_client *client, u8 reg) +{ + u16 foo; + foo = i2c_smbus_read_byte_data(client, reg); + foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8); + return foo; +} + +/* For some reason these registers are not contiguous. */ +static int ADT7462_REG_FAN(int fan) +{ + if (fan < 4) + return ADT7462_REG_FAN_BASE_ADDR + (2 * fan); + return ADT7462_REG_FAN2_BASE_ADDR + (2 * (fan - 4)); +} + +/* Voltage registers are scattered everywhere */ +static int ADT7462_REG_VOLT_MAX(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0x7C; + break; + case 1: + return 0x69; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0x7F; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0x7E; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x4B; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x49; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x68; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0x7D; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x6C; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x6B; + break; + case 10: + return 0x6A; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x50; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x4C; + break; + } + return -ENODEV; +} + +static int ADT7462_REG_VOLT_MIN(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0x6D; + break; + case 1: + return 0x72; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0x6F; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0x71; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x47; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x45; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x70; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0x6E; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x75; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x74; + break; + case 10: + return 0x73; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x76; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x77; + break; + } + return -ENODEV; +} + +static int ADT7462_REG_VOLT(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 0xA3; + break; + case 1: + return 0x90; + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 0xA9; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 0xA7; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) + return 0x8F; + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) + return 0x8B; + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 0x96; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 0xA5; + break; + case 8: + if (!(data->pin_cfg[2] & ADT7462_PIN26_VOLT_INPUT)) + return 0x93; + break; + case 9: + if (!(data->pin_cfg[2] & ADT7462_PIN25_VOLT_INPUT)) + return 0x92; + break; + case 10: + return 0x91; + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x94; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 0x95; + break; + } + return -ENODEV; +} + +/* Provide labels for sysfs */ +static const char *voltage_label(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return "+12V1"; + break; + case 1: + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) { + case 0: + return "Vccp1"; + case 1: + return "+2.5V"; + case 2: + return "+1.8V"; + case 3: + return "+1.5V"; + } + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return "+12V3"; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return "+5V"; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return "+0.9V"; + return "+1.25V"; + } + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return "+1.8V"; + return "+2.5V"; + } + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return "+3.3V"; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return "+12V2"; + break; + case 8: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) { + case 0: + return "Vbatt"; + case 1: + return "FSB_Vtt"; + } + break; + case 9: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) { + case 0: + return "+3.3V"; + case 1: + return "+1.2V1"; + } + break; + case 10: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) { + case 0: + return "Vccp2"; + case 1: + return "+2.5V"; + case 2: + return "+1.8V"; + case 3: + return "+1.5"; + } + case 11: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return "+1.5V ICH"; + break; + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return "+1.5V 3GPIO"; + break; + } + return "N/A"; +} + +/* Multipliers are actually in uV, not mV. */ +static int voltage_multiplier(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + if (!(data->pin_cfg[0] & ADT7462_PIN7_INPUT)) + return 62500; + break; + case 1: + switch (MASK_AND_SHIFT(data->pin_cfg[1], ADT7462_PIN23)) { + case 0: + if (data->pin_cfg[0] & ADT7462_VID_INPUT) + return 12500; + return 6250; + case 1: + return 13000; + case 2: + return 9400; + case 3: + return 7800; + } + case 2: + if (!(data->pin_cfg[1] & ADT7462_PIN22_INPUT)) + return 62500; + break; + case 3: + if (!(data->pin_cfg[1] & ADT7462_PIN21_INPUT)) + return 26000; + break; + case 4: + if (!(data->pin_cfg[0] & ADT7462_DIODE3_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN19_INPUT) + return 4690; + return 6500; + } + break; + case 5: + if (!(data->pin_cfg[0] & ADT7462_DIODE1_INPUT)) { + if (data->pin_cfg[1] & ADT7462_PIN15_INPUT) + return 9400; + return 13000; + } + break; + case 6: + if (!(data->pin_cfg[1] & ADT7462_PIN13_INPUT)) + return 17200; + break; + case 7: + if (!(data->pin_cfg[1] & ADT7462_PIN8_INPUT)) + return 62500; + break; + case 8: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN26)) { + case 0: + return 15600; + case 1: + return 6250; + } + break; + case 9: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN25)) { + case 0: + return 17200; + case 1: + return 6250; + } + break; + case 10: + switch (MASK_AND_SHIFT(data->pin_cfg[2], ADT7462_PIN24)) { + case 0: + return 6250; + case 1: + return 13000; + case 2: + return 9400; + case 3: + return 7800; + } + case 11: + case 12: + if (data->pin_cfg[3] >> ADT7462_PIN28_SHIFT == + ADT7462_PIN28_VOLT && + !(data->pin_cfg[0] & ADT7462_VID_INPUT)) + return 7800; + } + return 0; +} + +static int temp_enabled(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + case 2: + return 1; + case 1: + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT) + return 1; + break; + case 3: + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT) + return 1; + break; + } + return 0; +} + +static const char *temp_label(struct adt7462_data *data, int which) +{ + switch (which) { + case 0: + return "local"; + case 1: + if (data->pin_cfg[0] & ADT7462_DIODE1_INPUT) + return "remote1"; + break; + case 2: + return "remote2"; + case 3: + if (data->pin_cfg[0] & ADT7462_DIODE3_INPUT) + return "remote3"; + break; + } + return "N/A"; +} + +/* Map Trange register values to mC */ +#define NUM_TRANGE_VALUES 16 +static const int trange_values[NUM_TRANGE_VALUES] = { + 2000, + 2500, + 3300, + 4000, + 5000, + 6700, + 8000, + 10000, + 13300, + 16000, + 20000, + 26700, + 32000, + 40000, + 53300, + 80000 +}; + +static int find_trange_value(int trange) +{ + int i; + + for (i = 0; i < NUM_TRANGE_VALUES; i++) + if (trange_values[i] == trange) + return i; + + return -ENODEV; +} + +static struct adt7462_data *adt7462_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + unsigned long local_jiffies = jiffies; + int i; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->sensors_last_updated + + SENSOR_REFRESH_INTERVAL) + && data->sensors_valid) + goto no_sensor_update; + + for (i = 0; i < ADT7462_TEMP_COUNT; i++) { + /* + * Reading the fractional register locks the integral + * register until both have been read. + */ + data->temp_frac[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_REG(i)); + data->temp[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_REG(i) + 1); + } + + for (i = 0; i < ADT7462_FAN_COUNT; i++) + data->fan[i] = adt7462_read_word_data(client, + ADT7462_REG_FAN(i)); + + data->fan_enabled = i2c_smbus_read_byte_data(client, + ADT7462_REG_FAN_ENABLE); + + for (i = 0; i < ADT7462_PWM_COUNT; i++) + data->pwm[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM(i)); + + for (i = 0; i < ADT7462_PIN_CFG_REG_COUNT; i++) + data->pin_cfg[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PIN_CFG(i)); + + for (i = 0; i < ADT7462_VOLT_COUNT; i++) { + int reg = ADT7462_REG_VOLT(data, i); + if (!reg) + data->voltages[i] = 0; + else + data->voltages[i] = i2c_smbus_read_byte_data(client, + reg); + } + + data->alarms[0] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM1); + data->alarms[1] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM2); + data->alarms[2] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM3); + data->alarms[3] = i2c_smbus_read_byte_data(client, ADT7462_REG_ALARM4); + + data->sensors_last_updated = local_jiffies; + data->sensors_valid = 1; + +no_sensor_update: + if (time_before(local_jiffies, data->limits_last_updated + + LIMIT_REFRESH_INTERVAL) + && data->limits_valid) + goto out; + + for (i = 0; i < ADT7462_TEMP_COUNT; i++) { + data->temp_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_MIN_REG(i)); + data->temp_max[i] = i2c_smbus_read_byte_data(client, + ADT7462_TEMP_MAX_REG(i)); + } + + for (i = 0; i < ADT7462_FAN_COUNT; i++) + data->fan_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_FAN_MIN(i)); + + for (i = 0; i < ADT7462_VOLT_COUNT; i++) { + int reg = ADT7462_REG_VOLT_MAX(data, i); + data->volt_max[i] = + (reg ? i2c_smbus_read_byte_data(client, reg) : 0); + + reg = ADT7462_REG_VOLT_MIN(data, i); + data->volt_min[i] = + (reg ? i2c_smbus_read_byte_data(client, reg) : 0); + } + + for (i = 0; i < ADT7462_PWM_COUNT; i++) { + data->pwm_min[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_MIN(i)); + data->pwm_tmin[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_TMIN(i)); + data->pwm_trange[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_TRANGE(i)); + data->pwm_cfg[i] = i2c_smbus_read_byte_data(client, + ADT7462_REG_PWM_CFG(i)); + } + + data->pwm_max = i2c_smbus_read_byte_data(client, ADT7462_REG_PWM_MAX); + + data->cfg2 = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2); + + data->limits_last_updated = local_jiffies; + data->limits_valid = 1; + +out: + mutex_unlock(&data->lock); + return data; +} + +static ssize_t show_temp_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp_min[attr->index] - 64)); +} + +static ssize_t set_temp_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000) + 64; + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->temp_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MIN_REG(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp_max[attr->index] - 64)); +} + +static ssize_t set_temp_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp_enabled(data, attr->index)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000) + 64; + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->temp_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_TEMP_MAX_REG(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + u8 frac = data->temp_frac[attr->index] >> TEMP_FRAC_OFFSET; + + if (!temp_enabled(data, attr->index)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", 1000 * (data->temp[attr->index] - 64) + + 250 * frac); +} + +static ssize_t show_temp_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + return sprintf(buf, "%s\n", temp_label(data, attr->index)); +} + +static ssize_t show_volt_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->volt_max[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t set_volt_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int x = voltage_multiplier(data, attr->index); + long temp; + + if (strict_strtol(buf, 10, &temp) || !x) + return -EINVAL; + + temp *= 1000; /* convert mV to uV */ + temp = ROUND_DIV(temp, x); + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->volt_max[attr->index] = temp; + i2c_smbus_write_byte_data(client, + ADT7462_REG_VOLT_MAX(data, attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_volt_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->volt_min[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t set_volt_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int x = voltage_multiplier(data, attr->index); + long temp; + + if (strict_strtol(buf, 10, &temp) || !x) + return -EINVAL; + + temp *= 1000; /* convert mV to uV */ + temp = ROUND_DIV(temp, x); + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->volt_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, + ADT7462_REG_VOLT_MIN(data, attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int x = voltage_multiplier(data, attr->index); + + x *= data->voltages[attr->index]; + x /= 1000; /* convert from uV to mV */ + + return sprintf(buf, "%d\n", x); +} + +static ssize_t show_voltage_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + return sprintf(buf, "%s\n", voltage_label(data, attr->index)); +} + +static ssize_t show_alarm(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int reg = attr->index >> ADT7462_ALARM_REG_SHIFT; + int mask = attr->index & ADT7462_ALARM_FLAG_MASK; + + if (data->alarms[reg] & mask) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "0\n"); +} + +static int fan_enabled(struct adt7462_data *data, int fan) +{ + return data->fan_enabled & (1 << fan); +} + +static ssize_t show_fan_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + u16 temp; + + /* Only the MSB of the min fan period is stored... */ + temp = data->fan_min[attr->index]; + temp <<= 8; + + if (!fan_enabled(data, attr->index) || + !FAN_DATA_VALID(temp)) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", FAN_PERIOD_TO_RPM(temp)); +} + +static ssize_t set_fan_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp) || !temp || + !fan_enabled(data, attr->index)) + return -EINVAL; + + temp = FAN_RPM_TO_PERIOD(temp); + temp >>= 8; + temp = SENSORS_LIMIT(temp, 1, 255); + + mutex_lock(&data->lock); + data->fan_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_FAN_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + if (!fan_enabled(data, attr->index) || + !FAN_DATA_VALID(data->fan[attr->index])) + return sprintf(buf, "0\n"); + + return sprintf(buf, "%d\n", + FAN_PERIOD_TO_RPM(data->fan[attr->index])); +} + +static ssize_t show_force_pwm_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", (data->cfg2 & ADT7462_FSPD_MASK ? 1 : 0)); +} + +static ssize_t set_force_pwm_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + u8 reg; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + mutex_lock(&data->lock); + reg = i2c_smbus_read_byte_data(client, ADT7462_REG_CFG2); + if (temp) + reg |= ADT7462_FSPD_MASK; + else + reg &= ~ADT7462_FSPD_MASK; + data->cfg2 = reg; + i2c_smbus_write_byte_data(client, ADT7462_REG_CFG2, reg); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm[attr->index]); +} + +static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM(attr->index), temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_max(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_max); +} + +static ssize_t set_pwm_max(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm_max = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MAX, temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_min(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_min[attr->index]); +} + +static ssize_t set_pwm_min(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm_min[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_MIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_hyst(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", 1000 * + (data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK)); +} + +static ssize_t set_pwm_hyst(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000); + temp = SENSORS_LIMIT(temp, 0, 15); + + /* package things up */ + temp &= ADT7462_PWM_HYST_MASK; + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_RANGE_MASK; + + mutex_lock(&data->lock); + data->pwm_trange[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_tmax(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + + /* tmax = tmin + trange */ + int trange = trange_values[data->pwm_trange[attr->index] >> + ADT7462_PWM_RANGE_SHIFT]; + int tmin = (data->pwm_tmin[attr->index] - 64) * 1000; + + return sprintf(buf, "%d\n", tmin + trange); +} + +static ssize_t set_pwm_tmax(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + int temp; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + int tmin, trange_value; + long trange; + + if (strict_strtol(buf, 10, &trange)) + return -EINVAL; + + /* trange = tmax - tmin */ + tmin = (data->pwm_tmin[attr->index] - 64) * 1000; + trange_value = find_trange_value(trange - tmin); + + if (trange_value < 0) + return -EINVAL; + + temp = trange_value << ADT7462_PWM_RANGE_SHIFT; + temp |= data->pwm_trange[attr->index] & ADT7462_PWM_HYST_MASK; + + mutex_lock(&data->lock); + data->pwm_trange[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TRANGE(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_tmin(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + return sprintf(buf, "%d\n", 1000 * (data->pwm_tmin[attr->index] - 64)); +} + +static ssize_t set_pwm_tmin(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = ROUND_DIV(temp, 1000) + 64; + temp = SENSORS_LIMIT(temp, 0, 255); + + mutex_lock(&data->lock); + data->pwm_tmin[attr->index] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_TMIN(attr->index), + temp); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_pwm_auto(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int cfg = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT; + + switch (cfg) { + case 4: /* off */ + return sprintf(buf, "0\n"); + case 7: /* manual */ + return sprintf(buf, "1\n"); + default: /* automatic */ + return sprintf(buf, "2\n"); + } +} + +static void set_pwm_channel(struct i2c_client *client, + struct adt7462_data *data, + int which, + int value) +{ + int temp = data->pwm_cfg[which] & ~ADT7462_PWM_CHANNEL_MASK; + temp |= value << ADT7462_PWM_CHANNEL_SHIFT; + + mutex_lock(&data->lock); + data->pwm_cfg[which] = temp; + i2c_smbus_write_byte_data(client, ADT7462_REG_PWM_CFG(which), temp); + mutex_unlock(&data->lock); +} + +static ssize_t set_pwm_auto(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + switch (temp) { + case 0: /* off */ + set_pwm_channel(client, data, attr->index, 4); + return count; + case 1: /* manual */ + set_pwm_channel(client, data, attr->index, 7); + return count; + default: + return -EINVAL; + } +} + +static ssize_t show_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adt7462_data *data = adt7462_update_device(dev); + int channel = data->pwm_cfg[attr->index] >> ADT7462_PWM_CHANNEL_SHIFT; + + switch (channel) { + case 0: /* temp[1234] only */ + case 1: + case 2: + case 3: + return sprintf(buf, "%d\n", (1 << channel)); + case 5: /* temp1 & temp4 */ + return sprintf(buf, "9\n"); + case 6: + return sprintf(buf, "15\n"); + default: + return sprintf(buf, "0\n"); + } +} + +static int cvt_auto_temp(int input) +{ + if (input == 0xF) + return 6; + if (input == 0x9) + return 5; + if (input < 1 || !is_power_of_2(input)) + return -EINVAL; + return ilog2(input); +} + +static ssize_t set_pwm_auto_temp(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct adt7462_data *data = i2c_get_clientdata(client); + long temp; + + if (strict_strtol(buf, 10, &temp)) + return -EINVAL; + + temp = cvt_auto_temp(temp); + if (temp < 0) + return temp; + + set_pwm_channel(client, data, attr->index, temp); + + return count; +} + +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 0); +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 1); +static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 2); +static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_temp_max, + set_temp_max, 3); + +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 0); +static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 1); +static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 2); +static SENSOR_DEVICE_ATTR(temp4_min, S_IWUSR | S_IRUGO, show_temp_min, + set_temp_min, 3); + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3); + +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3); + +static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_LT_ALARM); +static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R1T_ALARM); +static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R2T_ALARM); +static SENSOR_DEVICE_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM1 | ADT7462_R3T_ALARM); + +static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 0); +static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 1); +static SENSOR_DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 2); +static SENSOR_DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 3); +static SENSOR_DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 4); +static SENSOR_DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 5); +static SENSOR_DEVICE_ATTR(in7_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 6); +static SENSOR_DEVICE_ATTR(in8_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 7); +static SENSOR_DEVICE_ATTR(in9_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 8); +static SENSOR_DEVICE_ATTR(in10_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 9); +static SENSOR_DEVICE_ATTR(in11_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 10); +static SENSOR_DEVICE_ATTR(in12_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 11); +static SENSOR_DEVICE_ATTR(in13_max, S_IWUSR | S_IRUGO, show_volt_max, + set_volt_max, 12); + +static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 0); +static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 1); +static SENSOR_DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 2); +static SENSOR_DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 3); +static SENSOR_DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 4); +static SENSOR_DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 5); +static SENSOR_DEVICE_ATTR(in7_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 6); +static SENSOR_DEVICE_ATTR(in8_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 7); +static SENSOR_DEVICE_ATTR(in9_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 8); +static SENSOR_DEVICE_ATTR(in10_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 9); +static SENSOR_DEVICE_ATTR(in11_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 10); +static SENSOR_DEVICE_ATTR(in12_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 11); +static SENSOR_DEVICE_ATTR(in13_min, S_IWUSR | S_IRUGO, show_volt_min, + set_volt_min, 12); + +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_voltage, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_voltage, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_voltage, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_voltage, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_voltage, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_voltage, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_voltage, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_voltage, NULL, 12); + +static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_voltage_label, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_voltage_label, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_voltage_label, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_voltage_label, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_voltage_label, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_voltage_label, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_voltage_label, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_voltage_label, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_voltage_label, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_voltage_label, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_voltage_label, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_voltage_label, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_label, S_IRUGO, show_voltage_label, NULL, 12); + +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V0_ALARM); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V7_ALARM); +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V2_ALARM); +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V6_ALARM); +static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V5_ALARM); +static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V4_ALARM); +static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V3_ALARM); +static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM2 | ADT7462_V1_ALARM); +static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V10_ALARM); +static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V9_ALARM); +static SENSOR_DEVICE_ATTR(in11_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V8_ALARM); +static SENSOR_DEVICE_ATTR(in12_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V11_ALARM); +static SENSOR_DEVICE_ATTR(in13_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM3 | ADT7462_V12_ALARM); + +static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 0); +static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 1); +static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 2); +static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 3); +static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 4); +static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 5); +static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 6); +static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO, show_fan_min, + set_fan_min, 7); + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3); +static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4); +static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 5); +static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 6); +static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan, NULL, 7); + +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F0_ALARM); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F1_ALARM); +static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F2_ALARM); +static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F3_ALARM); +static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F4_ALARM); +static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F5_ALARM); +static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F6_ALARM); +static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_alarm, NULL, + ADT7462_ALARM4 | ADT7462_F7_ALARM); + +static SENSOR_DEVICE_ATTR(force_pwm_max, S_IWUSR | S_IRUGO, + show_force_pwm_max, set_force_pwm_max, 0); + +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0); +static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1); +static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2); +static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_point1_pwm, S_IWUSR | S_IRUGO, + show_pwm_min, set_pwm_min, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_point2_pwm, S_IWUSR | S_IRUGO, + show_pwm_max, set_pwm_max, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point1_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point2_hyst, S_IWUSR | S_IRUGO, + show_pwm_hyst, set_pwm_hyst, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point1_temp, S_IWUSR | S_IRUGO, + show_pwm_tmin, set_pwm_tmin, 3); + +static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 0); +static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 1); +static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 2); +static SENSOR_DEVICE_ATTR(temp4_auto_point2_temp, S_IWUSR | S_IRUGO, + show_pwm_tmax, set_pwm_tmax, 3); + +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 0); +static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 1); +static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 2); +static SENSOR_DEVICE_ATTR(pwm4_enable, S_IWUSR | S_IRUGO, show_pwm_auto, + set_pwm_auto, 3); + +static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 0); +static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 1); +static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 2); +static SENSOR_DEVICE_ATTR(pwm4_auto_channels_temp, S_IWUSR | S_IRUGO, + show_pwm_auto_temp, set_pwm_auto_temp, 3); + +static struct attribute *adt7462_attr[] = +{ + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp4_max.dev_attr.attr, + + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp4_min.dev_attr.attr, + + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + &sensor_dev_attr_temp3_label.dev_attr.attr, + &sensor_dev_attr_temp4_label.dev_attr.attr, + + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, + &sensor_dev_attr_temp4_alarm.dev_attr.attr, + + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in7_max.dev_attr.attr, + &sensor_dev_attr_in8_max.dev_attr.attr, + &sensor_dev_attr_in9_max.dev_attr.attr, + &sensor_dev_attr_in10_max.dev_attr.attr, + &sensor_dev_attr_in11_max.dev_attr.attr, + &sensor_dev_attr_in12_max.dev_attr.attr, + &sensor_dev_attr_in13_max.dev_attr.attr, + + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in7_min.dev_attr.attr, + &sensor_dev_attr_in8_min.dev_attr.attr, + &sensor_dev_attr_in9_min.dev_attr.attr, + &sensor_dev_attr_in10_min.dev_attr.attr, + &sensor_dev_attr_in11_min.dev_attr.attr, + &sensor_dev_attr_in12_min.dev_attr.attr, + &sensor_dev_attr_in13_min.dev_attr.attr, + + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in11_input.dev_attr.attr, + &sensor_dev_attr_in12_input.dev_attr.attr, + &sensor_dev_attr_in13_input.dev_attr.attr, + + &sensor_dev_attr_in1_label.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr, + &sensor_dev_attr_in3_label.dev_attr.attr, + &sensor_dev_attr_in4_label.dev_attr.attr, + &sensor_dev_attr_in5_label.dev_attr.attr, + &sensor_dev_attr_in6_label.dev_attr.attr, + &sensor_dev_attr_in7_label.dev_attr.attr, + &sensor_dev_attr_in8_label.dev_attr.attr, + &sensor_dev_attr_in9_label.dev_attr.attr, + &sensor_dev_attr_in10_label.dev_attr.attr, + &sensor_dev_attr_in11_label.dev_attr.attr, + &sensor_dev_attr_in12_label.dev_attr.attr, + &sensor_dev_attr_in13_label.dev_attr.attr, + + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &sensor_dev_attr_in6_alarm.dev_attr.attr, + &sensor_dev_attr_in7_alarm.dev_attr.attr, + &sensor_dev_attr_in8_alarm.dev_attr.attr, + &sensor_dev_attr_in9_alarm.dev_attr.attr, + &sensor_dev_attr_in10_alarm.dev_attr.attr, + &sensor_dev_attr_in11_alarm.dev_attr.attr, + &sensor_dev_attr_in12_alarm.dev_attr.attr, + &sensor_dev_attr_in13_alarm.dev_attr.attr, + + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan5_min.dev_attr.attr, + &sensor_dev_attr_fan6_min.dev_attr.attr, + &sensor_dev_attr_fan7_min.dev_attr.attr, + &sensor_dev_attr_fan8_min.dev_attr.attr, + + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan6_input.dev_attr.attr, + &sensor_dev_attr_fan7_input.dev_attr.attr, + &sensor_dev_attr_fan8_input.dev_attr.attr, + + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, + &sensor_dev_attr_fan4_alarm.dev_attr.attr, + &sensor_dev_attr_fan5_alarm.dev_attr.attr, + &sensor_dev_attr_fan6_alarm.dev_attr.attr, + &sensor_dev_attr_fan7_alarm.dev_attr.attr, + &sensor_dev_attr_fan8_alarm.dev_attr.attr, + + &sensor_dev_attr_force_pwm_max.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm4.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_point1_pwm.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_point2_pwm.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_hyst.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point1_temp.dev_attr.attr, + + &sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_temp4_auto_point2_temp.dev_attr.attr, + + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm4_enable.dev_attr.attr, + + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_pwm4_auto_channels_temp.dev_attr.attr, + NULL +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adt7462_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind <= 0) { + int vendor, device, revision; + + vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR); + if (vendor != ADT7462_VENDOR) + return -ENODEV; + + device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE); + if (device != ADT7462_DEVICE) + return -ENODEV; + + revision = i2c_smbus_read_byte_data(client, + ADT7462_REG_REVISION); + if (revision != ADT7462_REVISION) + return -ENODEV; + } else + dev_dbg(&adapter->dev, "detection forced\n"); + + strlcpy(info->type, "adt7462", I2C_NAME_SIZE); + + return 0; +} + +static int adt7462_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adt7462_data *data; + int err; + + data = kzalloc(sizeof(struct adt7462_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s chip found\n", client->name); + + /* Register sysfs hooks */ + data->attrs.attrs = adt7462_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &data->attrs); +exit_free: + kfree(data); +exit: + return err; +} + +static int adt7462_remove(struct i2c_client *client) +{ + struct adt7462_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &data->attrs); + kfree(data); + return 0; +} + +static int __init adt7462_init(void) +{ + return i2c_add_driver(&adt7462_driver); +} + +static void __exit adt7462_exit(void) +{ + i2c_del_driver(&adt7462_driver); +} + +MODULE_AUTHOR("Darrick J. Wong "); +MODULE_DESCRIPTION("ADT7462 driver"); +MODULE_LICENSE("GPL"); + +module_init(adt7462_init); +module_exit(adt7462_exit); -- cgit v1.2.3-70-g09d2 From a412ae3fb90ab49072b82c8cfa1e3e60d2b27005 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 12 Nov 2008 13:27:04 -0800 Subject: ics932s401: new clock generator chip driver The ics932s401 is a clock generator chip. This driver allows users to read the current clock outputs. Signed-off-by: Darrick J. Wong Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ics932s401 | 31 +++ drivers/misc/Kconfig | 10 + drivers/misc/Makefile | 1 + drivers/misc/ics932s401.c | 515 ++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 557 insertions(+) create mode 100644 Documentation/ics932s401 create mode 100644 drivers/misc/ics932s401.c diff --git a/Documentation/ics932s401 b/Documentation/ics932s401 new file mode 100644 index 00000000000..07a739f406d --- /dev/null +++ b/Documentation/ics932s401 @@ -0,0 +1,31 @@ +Kernel driver ics932s401 +====================== + +Supported chips: + * IDT ICS932S401 + Prefix: 'ics932s401' + Addresses scanned: I2C 0x69 + Datasheet: Publically available at the IDT website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the IDT ICS932S401 chip family. + +This chip has 4 clock outputs--a base clock for the CPU (which is likely +multiplied to get the real CPU clock), a system clock, a PCI clock, a USB +clock, and a reference clock. The driver reports selected and actual +frequency. If spread spectrum mode is enabled, the driver also reports by what +percent the clock signal is being spread, which should be between 0 and -0.5%. +All frequencies are reported in KHz. + +The ICS932S401 monitors all inputs continuously. The driver will not read +the registers more often than once every other second. + +Special Features +---------------- + +The clocks could be reprogrammed to increase system speed. I will not help you +do this, as you risk damaging your system! diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 4494ad27cbf..dcac7ca7693 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -227,6 +227,16 @@ config HP_WMI To compile this driver as a module, choose M here: the module will be called hp-wmi. +config ICS932S401 + tristate "Integrated Circuits ICS932S401" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Integrated Circuits + ICS932S401 clock control chips. + + This driver can also be built as a module. If so, the module + will be called ics932s401. + config MSI_LAPTOP tristate "MSI Laptop Extras" depends on X86 diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 909e2468cdc..bb14633d136 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o obj-$(CONFIG_HP_WMI) += hp-wmi.o +obj-$(CONFIG_ICS932S401) += ics932s401.o obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o diff --git a/drivers/misc/ics932s401.c b/drivers/misc/ics932s401.c new file mode 100644 index 00000000000..6e43ab4231a --- /dev/null +++ b/drivers/misc/ics932s401.c @@ -0,0 +1,515 @@ +/* + * A driver for the Integrated Circuits ICS932S401 + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END }; + +/* Insmod parameters */ +I2C_CLIENT_INSMOD_1(ics932s401); + +/* ICS932S401 registers */ +#define ICS932S401_REG_CFG2 0x01 +#define ICS932S401_CFG1_SPREAD 0x01 +#define ICS932S401_REG_CFG7 0x06 +#define ICS932S401_FS_MASK 0x07 +#define ICS932S401_REG_VENDOR_REV 0x07 +#define ICS932S401_VENDOR 1 +#define ICS932S401_VENDOR_MASK 0x0F +#define ICS932S401_REV 4 +#define ICS932S401_REV_SHIFT 4 +#define ICS932S401_REG_DEVICE 0x09 +#define ICS932S401_DEVICE 11 +#define ICS932S401_REG_CTRL 0x0A +#define ICS932S401_MN_ENABLED 0x80 +#define ICS932S401_CPU_ALT 0x04 +#define ICS932S401_SRC_ALT 0x08 +#define ICS932S401_REG_CPU_M_CTRL 0x0B +#define ICS932S401_M_MASK 0x3F +#define ICS932S401_REG_CPU_N_CTRL 0x0C +#define ICS932S401_REG_CPU_SPREAD1 0x0D +#define ICS932S401_REG_CPU_SPREAD2 0x0E +#define ICS932S401_SPREAD_MASK 0x7FFF +#define ICS932S401_REG_SRC_M_CTRL 0x0F +#define ICS932S401_REG_SRC_N_CTRL 0x10 +#define ICS932S401_REG_SRC_SPREAD1 0x11 +#define ICS932S401_REG_SRC_SPREAD2 0x12 +#define ICS932S401_REG_CPU_DIVISOR 0x13 +#define ICS932S401_CPU_DIVISOR_SHIFT 4 +#define ICS932S401_REG_PCISRC_DIVISOR 0x14 +#define ICS932S401_SRC_DIVISOR_MASK 0x0F +#define ICS932S401_PCI_DIVISOR_SHIFT 4 + +/* Base clock is 14.318MHz */ +#define BASE_CLOCK 14318 + +#define NUM_REGS 21 +#define NUM_MIRRORED_REGS 15 + +static int regs_to_copy[NUM_MIRRORED_REGS] = { + ICS932S401_REG_CFG2, + ICS932S401_REG_CFG7, + ICS932S401_REG_VENDOR_REV, + ICS932S401_REG_DEVICE, + ICS932S401_REG_CTRL, + ICS932S401_REG_CPU_M_CTRL, + ICS932S401_REG_CPU_N_CTRL, + ICS932S401_REG_CPU_SPREAD1, + ICS932S401_REG_CPU_SPREAD2, + ICS932S401_REG_SRC_M_CTRL, + ICS932S401_REG_SRC_N_CTRL, + ICS932S401_REG_SRC_SPREAD1, + ICS932S401_REG_SRC_SPREAD2, + ICS932S401_REG_CPU_DIVISOR, + ICS932S401_REG_PCISRC_DIVISOR, +}; + +/* How often do we reread sensors values? (In jiffies) */ +#define SENSOR_REFRESH_INTERVAL (2 * HZ) + +/* How often do we reread sensor limit values? (In jiffies) */ +#define LIMIT_REFRESH_INTERVAL (60 * HZ) + +struct ics932s401_data { + struct attribute_group attrs; + struct mutex lock; + char sensors_valid; + unsigned long sensors_last_updated; /* In jiffies */ + + u8 regs[NUM_REGS]; +}; + +static int ics932s401_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int ics932s401_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int ics932s401_remove(struct i2c_client *client); + +static const struct i2c_device_id ics932s401_id[] = { + { "ics932s401", ics932s401 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ics932s401_id); + +static struct i2c_driver ics932s401_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ics932s401", + }, + .probe = ics932s401_probe, + .remove = ics932s401_remove, + .id_table = ics932s401_id, + .detect = ics932s401_detect, + .address_data = &addr_data, +}; + +static struct ics932s401_data *ics932s401_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ics932s401_data *data = i2c_get_clientdata(client); + unsigned long local_jiffies = jiffies; + int i, temp; + + mutex_lock(&data->lock); + if (time_before(local_jiffies, data->sensors_last_updated + + SENSOR_REFRESH_INTERVAL) + && data->sensors_valid) + goto out; + + /* + * Each register must be read as a word and then right shifted 8 bits. + * Not really sure why this is; setting the "byte count programming" + * register to 1 does not fix this problem. + */ + for (i = 0; i < NUM_MIRRORED_REGS; i++) { + temp = i2c_smbus_read_word_data(client, regs_to_copy[i]); + data->regs[regs_to_copy[i]] = temp >> 8; + } + + data->sensors_last_updated = local_jiffies; + data->sensors_valid = 1; + +out: + mutex_unlock(&data->lock); + return data; +} + +static ssize_t show_spread_enabled(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + if (data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD) + return sprintf(buf, "1\n"); + + return sprintf(buf, "0\n"); +} + +/* bit to cpu khz map */ +static const int fs_speeds[] = { + 266666, + 133333, + 200000, + 166666, + 333333, + 100000, + 400000, + 0, +}; + +/* clock divisor map */ +static const int divisors[] = {2, 3, 5, 15, 4, 6, 10, 30, 8, 12, 20, 60, 16, + 24, 40, 120}; + +/* Calculate CPU frequency from the M/N registers. */ +static int calculate_cpu_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_CPU_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_CPU_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_CPU_DIVISOR] >> + ICS932S401_CPU_DIVISOR_SHIFT]; + + return freq; +} + +static ssize_t show_cpu_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_cpu_freq(data)); +} + +static ssize_t show_cpu_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_cpu_freq(data); + else { + /* Freq is neatly wrapped up for us */ + int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK; + freq = fs_speeds[fid]; + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) { + switch (freq) { + case 166666: + freq = 160000; + break; + case 333333: + freq = 320000; + break; + } + } + } + + return sprintf(buf, "%d\n", freq); +} + +/* Calculate SRC frequency from the M/N registers. */ +static int calculate_src_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_SRC_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] & + ICS932S401_SRC_DIVISOR_MASK]; + + return freq; +} + +static ssize_t show_src_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_src_freq(data)); +} + +static ssize_t show_src_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_src_freq(data); + else + /* Freq is neatly wrapped up for us */ + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT && + data->regs[ICS932S401_REG_CTRL] & ICS932S401_SRC_ALT) + freq = 96000; + else + freq = 100000; + + return sprintf(buf, "%d\n", freq); +} + +/* Calculate PCI frequency from the SRC M/N registers. */ +static int calculate_pci_freq(struct ics932s401_data *data) +{ + int m, n, freq; + + m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK; + n = data->regs[ICS932S401_REG_SRC_N_CTRL]; + + /* Pull in bits 8 & 9 from the M register */ + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1; + n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3; + + freq = BASE_CLOCK * (n + 8) / (m + 2); + freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] >> + ICS932S401_PCI_DIVISOR_SHIFT]; + + return freq; +} + +static ssize_t show_pci_clock(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + + return sprintf(buf, "%d\n", calculate_pci_freq(data)); +} + +static ssize_t show_pci_clock_sel(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int freq; + + if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED) + freq = calculate_pci_freq(data); + else + freq = 33333; + + return sprintf(buf, "%d\n", freq); +} + +static ssize_t show_value(struct device *dev, + struct device_attribute *devattr, + char *buf); + +static ssize_t show_spread(struct device *dev, + struct device_attribute *devattr, + char *buf); + +static DEVICE_ATTR(spread_enabled, S_IRUGO, show_spread_enabled, NULL); +static DEVICE_ATTR(cpu_clock_selection, S_IRUGO, show_cpu_clock_sel, NULL); +static DEVICE_ATTR(cpu_clock, S_IRUGO, show_cpu_clock, NULL); +static DEVICE_ATTR(src_clock_selection, S_IRUGO, show_src_clock_sel, NULL); +static DEVICE_ATTR(src_clock, S_IRUGO, show_src_clock, NULL); +static DEVICE_ATTR(pci_clock_selection, S_IRUGO, show_pci_clock_sel, NULL); +static DEVICE_ATTR(pci_clock, S_IRUGO, show_pci_clock, NULL); +static DEVICE_ATTR(usb_clock, S_IRUGO, show_value, NULL); +static DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL); +static DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL); +static DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL); + +static struct attribute *ics932s401_attr[] = +{ + &dev_attr_spread_enabled.attr, + &dev_attr_cpu_clock_selection.attr, + &dev_attr_cpu_clock.attr, + &dev_attr_src_clock_selection.attr, + &dev_attr_src_clock.attr, + &dev_attr_pci_clock_selection.attr, + &dev_attr_pci_clock.attr, + &dev_attr_usb_clock.attr, + &dev_attr_ref_clock.attr, + &dev_attr_cpu_spread.attr, + &dev_attr_src_spread.attr, + NULL +}; + +static ssize_t show_value(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + int x; + + if (devattr == &dev_attr_usb_clock) + x = 48000; + else if (devattr == &dev_attr_ref_clock) + x = BASE_CLOCK; + else + BUG(); + + return sprintf(buf, "%d\n", x); +} + +static ssize_t show_spread(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct ics932s401_data *data = ics932s401_update_device(dev); + int reg; + unsigned long val; + + if (!(data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD)) + return sprintf(buf, "0%%\n"); + + if (devattr == &dev_attr_src_spread) + reg = ICS932S401_REG_SRC_SPREAD1; + else if (devattr == &dev_attr_cpu_spread) + reg = ICS932S401_REG_CPU_SPREAD1; + else + BUG(); + + val = data->regs[reg] | (data->regs[reg + 1] << 8); + val &= ICS932S401_SPREAD_MASK; + + /* Scale 0..2^14 to -0.5. */ + val = 500000 * val / 16384; + return sprintf(buf, "-0.%lu%%\n", val); +} + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int ics932s401_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + if (kind <= 0) { + int vendor, device, revision; + + vendor = i2c_smbus_read_word_data(client, + ICS932S401_REG_VENDOR_REV); + vendor >>= 8; + revision = vendor >> ICS932S401_REV_SHIFT; + vendor &= ICS932S401_VENDOR_MASK; + if (vendor != ICS932S401_VENDOR) + return -ENODEV; + + device = i2c_smbus_read_word_data(client, + ICS932S401_REG_DEVICE); + device >>= 8; + if (device != ICS932S401_DEVICE) + return -ENODEV; + + if (revision != ICS932S401_REV) + dev_info(&adapter->dev, "Unknown revision %d\n", + revision); + } else + dev_dbg(&adapter->dev, "detection forced\n"); + + strlcpy(info->type, "ics932s401", I2C_NAME_SIZE); + + return 0; +} + +static int ics932s401_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ics932s401_data *data; + int err; + + data = kzalloc(sizeof(struct ics932s401_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s chip found\n", client->name); + + /* Register sysfs hooks */ + data->attrs.attrs = ics932s401_attr; + err = sysfs_create_group(&client->dev.kobj, &data->attrs); + if (err) + goto exit_free; + + return 0; + +exit_free: + kfree(data); +exit: + return err; +} + +static int ics932s401_remove(struct i2c_client *client) +{ + struct ics932s401_data *data = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &data->attrs); + kfree(data); + return 0; +} + +static int __init ics932s401_init(void) +{ + return i2c_add_driver(&ics932s401_driver); +} + +static void __exit ics932s401_exit(void) +{ + i2c_del_driver(&ics932s401_driver); +} + +MODULE_AUTHOR("Darrick J. Wong "); +MODULE_DESCRIPTION("ICS932S401 driver"); +MODULE_LICENSE("GPL"); + +module_init(ics932s401_init); +module_exit(ics932s401_exit); + +/* IBM IntelliStation Z30 */ +MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*"); +MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*"); + +/* IBM x3650/x3550 */ +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*"); +MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*"); -- cgit v1.2.3-70-g09d2 From 077eaf5b40ecb2c345d82f02275c20e965dfa3e5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 12 Nov 2008 13:27:04 -0800 Subject: rtc: rtc-wm8350: add support for WM8350 RTC This adds support for the RTC provided by the Wolfson Microelectronics WM8350. This driver was originally written by Graeme Gregory and Liam Girdwood, though it has been modified since then to update it to current mainline coding standards and for API completeness. [akpm@linux-foundation.org: s/schedule_timeout_interruptible/schedule_timeout_uninterruptible/ to prevent bogus timeout when signal_pending()] Signed-off-by: Mark Brown Cc: Alessandro Zummo Cc: David Brownell Cc: Liam Girdwood Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/Kconfig | 10 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-wm8350.c | 514 +++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/wm8350/rtc.h | 2 + 4 files changed, 527 insertions(+) create mode 100644 drivers/rtc/rtc-wm8350.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 8abbb2020af..7951ad2fd99 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -468,6 +468,16 @@ config RTC_DRV_V3020 This driver can also be built as a module. If so, the module will be called rtc-v3020. +config RTC_DRV_WM8350 + tristate "Wolfson Microelectronics WM8350 RTC" + depends on MFD_WM8350 + help + If you say yes here you will get support for the RTC subsystem + of the Wolfson Microelectronics WM8350. + + This driver can also be built as a module. If so, the module + will be called "rtc-wm8350". + comment "on-CPU RTC drivers" config RTC_DRV_OMAP diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index e9e8474cc8f..7a41201e7ef 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -66,4 +66,5 @@ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o +obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o diff --git a/drivers/rtc/rtc-wm8350.c b/drivers/rtc/rtc-wm8350.c new file mode 100644 index 00000000000..5c5e3aa9138 --- /dev/null +++ b/drivers/rtc/rtc-wm8350.c @@ -0,0 +1,514 @@ +/* + * Real Time Clock driver for Wolfson Microelectronics WM8350 + * + * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood + * linux@wolfsonmicro.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define WM8350_SET_ALM_RETRIES 5 +#define WM8350_SET_TIME_RETRIES 5 +#define WM8350_GET_TIME_RETRIES 5 + +#define to_wm8350_from_rtc_dev(d) container_of(d, struct wm8350, rtc.pdev.dev) + +/* + * Read current time and date in RTC + */ +static int wm8350_rtc_readtime(struct device *dev, struct rtc_time *tm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + u16 time1[4], time2[4]; + int retries = WM8350_GET_TIME_RETRIES, ret; + + /* + * Read the time twice and compare. + * If time1 == time2, then time is valid else retry. + */ + do { + ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES, + 4, time1); + if (ret < 0) + return ret; + ret = wm8350_block_read(wm8350, WM8350_RTC_SECONDS_MINUTES, + 4, time2); + if (ret < 0) + return ret; + + if (memcmp(time1, time2, sizeof(time1)) == 0) { + tm->tm_sec = time1[0] & WM8350_RTC_SECS_MASK; + + tm->tm_min = (time1[0] & WM8350_RTC_MINS_MASK) + >> WM8350_RTC_MINS_SHIFT; + + tm->tm_hour = time1[1] & WM8350_RTC_HRS_MASK; + + tm->tm_wday = ((time1[1] >> WM8350_RTC_DAY_SHIFT) + & 0x7) - 1; + + tm->tm_mon = ((time1[2] & WM8350_RTC_MTH_MASK) + >> WM8350_RTC_MTH_SHIFT) - 1; + + tm->tm_mday = (time1[2] & WM8350_RTC_DATE_MASK); + + tm->tm_year = ((time1[3] & WM8350_RTC_YHUNDREDS_MASK) + >> WM8350_RTC_YHUNDREDS_SHIFT) * 100; + tm->tm_year += time1[3] & WM8350_RTC_YUNITS_MASK; + + tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, + tm->tm_year); + tm->tm_year -= 1900; + + dev_dbg(dev, "Read (%d left): %04x %04x %04x %04x\n", + retries, + time1[0], time1[1], time1[2], time1[3]); + + return 0; + } + } while (retries--); + + dev_err(dev, "timed out reading RTC time\n"); + return -EIO; +} + +/* + * Set current time and date in RTC + */ +static int wm8350_rtc_settime(struct device *dev, struct rtc_time *tm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + u16 time[4]; + u16 rtc_ctrl; + int ret, retries = WM8350_SET_TIME_RETRIES; + + time[0] = tm->tm_sec; + time[0] |= tm->tm_min << WM8350_RTC_MINS_SHIFT; + time[1] = tm->tm_hour; + time[1] |= (tm->tm_wday + 1) << WM8350_RTC_DAY_SHIFT; + time[2] = tm->tm_mday; + time[2] |= (tm->tm_mon + 1) << WM8350_RTC_MTH_SHIFT; + time[3] = ((tm->tm_year + 1900) / 100) << WM8350_RTC_YHUNDREDS_SHIFT; + time[3] |= (tm->tm_year + 1900) % 100; + + dev_dbg(dev, "Setting: %04x %04x %04x %04x\n", + time[0], time[1], time[2], time[3]); + + /* Set RTC_SET to stop the clock */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, WM8350_RTC_SET); + if (ret < 0) + return ret; + + /* Wait until confirmation of stopping */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && !(rtc_ctrl & WM8350_RTC_STS)); + + if (!retries) { + dev_err(dev, "timed out on set confirmation\n"); + return -EIO; + } + + /* Write time to RTC */ + ret = wm8350_block_write(wm8350, WM8350_RTC_SECONDS_MINUTES, 4, time); + if (ret < 0) + return ret; + + /* Clear RTC_SET to start the clock */ + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_SET); + return ret; +} + +/* + * Read alarm time and date in RTC + */ +static int wm8350_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + u16 time[4]; + int ret; + + ret = wm8350_block_read(wm8350, WM8350_ALARM_SECONDS_MINUTES, 4, time); + if (ret < 0) + return ret; + + tm->tm_sec = time[0] & WM8350_RTC_ALMSECS_MASK; + if (tm->tm_sec == WM8350_RTC_ALMSECS_MASK) + tm->tm_sec = -1; + + tm->tm_min = time[0] & WM8350_RTC_ALMMINS_MASK; + if (tm->tm_min == WM8350_RTC_ALMMINS_MASK) + tm->tm_min = -1; + else + tm->tm_min >>= WM8350_RTC_ALMMINS_SHIFT; + + tm->tm_hour = time[1] & WM8350_RTC_ALMHRS_MASK; + if (tm->tm_hour == WM8350_RTC_ALMHRS_MASK) + tm->tm_hour = -1; + + tm->tm_wday = ((time[1] >> WM8350_RTC_ALMDAY_SHIFT) & 0x7) - 1; + if (tm->tm_wday > 7) + tm->tm_wday = -1; + + tm->tm_mon = time[2] & WM8350_RTC_ALMMTH_MASK; + if (tm->tm_mon == WM8350_RTC_ALMMTH_MASK) + tm->tm_mon = -1; + else + tm->tm_mon = (tm->tm_mon >> WM8350_RTC_ALMMTH_SHIFT) - 1; + + tm->tm_mday = (time[2] & WM8350_RTC_ALMDATE_MASK); + if (tm->tm_mday == WM8350_RTC_ALMDATE_MASK) + tm->tm_mday = -1; + + tm->tm_year = -1; + + alrm->enabled = !(time[3] & WM8350_RTC_ALMSTS); + + return 0; +} + +static int wm8350_rtc_stop_alarm(struct wm8350 *wm8350) +{ + int retries = WM8350_SET_ALM_RETRIES; + u16 rtc_ctrl; + int ret; + + /* Set RTC_SET to stop the clock */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret < 0) + return ret; + + /* Wait until confirmation of stopping */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && !(rtc_ctrl & WM8350_RTC_ALMSTS)); + + if (!(rtc_ctrl & WM8350_RTC_ALMSTS)) + return -ETIMEDOUT; + + return 0; +} + +static int wm8350_rtc_start_alarm(struct wm8350 *wm8350) +{ + int ret; + int retries = WM8350_SET_ALM_RETRIES; + u16 rtc_ctrl; + + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret < 0) + return ret; + + /* Wait until confirmation */ + do { + rtc_ctrl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + schedule_timeout_uninterruptible(msecs_to_jiffies(1)); + } while (retries-- && rtc_ctrl & WM8350_RTC_ALMSTS); + + if (rtc_ctrl & WM8350_RTC_ALMSTS) + return -ETIMEDOUT; + + return 0; +} + +static int wm8350_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + u16 time[3]; + int ret; + + memset(time, 0, sizeof(time)); + + if (tm->tm_sec != -1) + time[0] |= tm->tm_sec; + else + time[0] |= WM8350_RTC_ALMSECS_MASK; + + if (tm->tm_min != -1) + time[0] |= tm->tm_min << WM8350_RTC_ALMMINS_SHIFT; + else + time[0] |= WM8350_RTC_ALMMINS_MASK; + + if (tm->tm_hour != -1) + time[1] |= tm->tm_hour; + else + time[1] |= WM8350_RTC_ALMHRS_MASK; + + if (tm->tm_wday != -1) + time[1] |= (tm->tm_wday + 1) << WM8350_RTC_ALMDAY_SHIFT; + else + time[1] |= WM8350_RTC_ALMDAY_MASK; + + if (tm->tm_mday != -1) + time[2] |= tm->tm_mday; + else + time[2] |= WM8350_RTC_ALMDATE_MASK; + + if (tm->tm_mon != -1) + time[2] |= (tm->tm_mon + 1) << WM8350_RTC_ALMMTH_SHIFT; + else + time[2] |= WM8350_RTC_ALMMTH_MASK; + + ret = wm8350_rtc_stop_alarm(wm8350); + if (ret < 0) + return ret; + + /* Write time to RTC */ + ret = wm8350_block_write(wm8350, WM8350_ALARM_SECONDS_MINUTES, + 3, time); + if (ret < 0) + return ret; + + if (alrm->enabled) + ret = wm8350_rtc_start_alarm(wm8350); + + return ret; +} + +/* + * Handle commands from user-space + */ +static int wm8350_rtc_ioctl(struct device *dev, unsigned int cmd, + unsigned long arg) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + + switch (cmd) { + case RTC_AIE_OFF: + return wm8350_rtc_stop_alarm(wm8350); + case RTC_AIE_ON: + return wm8350_rtc_start_alarm(wm8350); + + case RTC_UIE_OFF: + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + break; + case RTC_UIE_ON: + wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_SEC); + break; + + default: + return -ENOIOCTLCMD; + } + + return 0; +} + +static void wm8350_rtc_alarm_handler(struct wm8350 *wm8350, int irq, + void *data) +{ + struct rtc_device *rtc = wm8350->rtc.rtc; + int ret; + + rtc_update_irq(rtc, 1, RTC_IRQF | RTC_AF); + + /* Make it one shot */ + ret = wm8350_set_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_ALMSET); + if (ret != 0) { + dev_err(&(wm8350->rtc.pdev->dev), + "Failed to disable alarm: %d\n", ret); + } +} + +static void wm8350_rtc_update_handler(struct wm8350 *wm8350, int irq, + void *data) +{ + struct rtc_device *rtc = wm8350->rtc.rtc; + + rtc_update_irq(rtc, 1, RTC_IRQF | RTC_UF); +} + +static const struct rtc_class_ops wm8350_rtc_ops = { + .ioctl = wm8350_rtc_ioctl, + .read_time = wm8350_rtc_readtime, + .set_time = wm8350_rtc_settime, + .read_alarm = wm8350_rtc_readalarm, + .set_alarm = wm8350_rtc_setalarm, +}; + +#ifdef CONFIG_PM +static int wm8350_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev); + int ret = 0; + u16 reg; + + reg = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + + if (device_may_wakeup(&wm8350->rtc.pdev->dev) && + reg & WM8350_RTC_ALMSTS) { + ret = wm8350_rtc_stop_alarm(wm8350); + if (ret != 0) + dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n", + ret); + } + + return ret; +} + +static int wm8350_rtc_resume(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = dev_get_drvdata(&pdev->dev); + int ret; + + if (wm8350->rtc.alarm_enabled) { + ret = wm8350_rtc_start_alarm(wm8350); + if (ret != 0) + dev_err(&pdev->dev, + "Failed to restart RTC alarm: %d\n", ret); + } + + return 0; +} + +#else +#define wm8350_rtc_suspend NULL +#define wm8350_rtc_resume NULL +#endif + +static int wm8350_rtc_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + struct wm8350_rtc *wm_rtc = &wm8350->rtc; + int ret = 0; + u16 timectl, power5; + + timectl = wm8350_reg_read(wm8350, WM8350_RTC_TIME_CONTROL); + if (timectl & WM8350_RTC_BCD) { + dev_err(&pdev->dev, "RTC BCD mode not supported\n"); + return -EINVAL; + } + if (timectl & WM8350_RTC_12HR) { + dev_err(&pdev->dev, "RTC 12 hour mode not supported\n"); + return -EINVAL; + } + + /* enable the RTC if it's not already enabled */ + power5 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5); + if (!(power5 & WM8350_RTC_TICK_ENA)) { + dev_info(wm8350->dev, "Starting RTC\n"); + + wm8350_reg_unlock(wm8350); + + ret = wm8350_set_bits(wm8350, WM8350_POWER_MGMT_5, + WM8350_RTC_TICK_ENA); + if (ret < 0) { + dev_err(&pdev->dev, "failed to enable RTC: %d\n", ret); + return ret; + } + + wm8350_reg_lock(wm8350); + } + + if (timectl & WM8350_RTC_STS) { + int retries; + + ret = wm8350_clear_bits(wm8350, WM8350_RTC_TIME_CONTROL, + WM8350_RTC_SET); + if (ret < 0) { + dev_err(&pdev->dev, "failed to start: %d\n", ret); + return ret; + } + + retries = WM8350_SET_TIME_RETRIES; + do { + timectl = wm8350_reg_read(wm8350, + WM8350_RTC_TIME_CONTROL); + } while (timectl & WM8350_RTC_STS && retries--); + + if (retries == 0) { + dev_err(&pdev->dev, "failed to start: timeout\n"); + return -ENODEV; + } + } + + device_init_wakeup(&pdev->dev, 1); + + wm_rtc->rtc = rtc_device_register("wm8350", &pdev->dev, + &wm8350_rtc_ops, THIS_MODULE); + if (IS_ERR(wm_rtc->rtc)) { + ret = PTR_ERR(wm_rtc->rtc); + dev_err(&pdev->dev, "failed to register RTC: %d\n", ret); + return ret; + } + + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_PER); + + wm8350_register_irq(wm8350, WM8350_IRQ_RTC_SEC, + wm8350_rtc_update_handler, NULL); + + wm8350_register_irq(wm8350, WM8350_IRQ_RTC_ALM, + wm8350_rtc_alarm_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_RTC_ALM); + + return 0; +} + +static int __devexit wm8350_rtc_remove(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + struct wm8350_rtc *wm_rtc = &wm8350->rtc; + + wm8350_mask_irq(wm8350, WM8350_IRQ_RTC_SEC); + + wm8350_free_irq(wm8350, WM8350_IRQ_RTC_SEC); + wm8350_free_irq(wm8350, WM8350_IRQ_RTC_ALM); + + rtc_device_unregister(wm_rtc->rtc); + + return 0; +} + +static struct platform_driver wm8350_rtc_driver = { + .probe = wm8350_rtc_probe, + .remove = __devexit_p(wm8350_rtc_remove), + .suspend = wm8350_rtc_suspend, + .resume = wm8350_rtc_resume, + .driver = { + .name = "wm8350-rtc", + }, +}; + +static int __init wm8350_rtc_init(void) +{ + return platform_driver_register(&wm8350_rtc_driver); +} +module_init(wm8350_rtc_init); + +static void __exit wm8350_rtc_exit(void) +{ + platform_driver_unregister(&wm8350_rtc_driver); +} +module_exit(wm8350_rtc_exit); + +MODULE_AUTHOR("Mark Brown "); +MODULE_DESCRIPTION("RTC driver for the WM8350"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm8350-rtc"); diff --git a/include/linux/mfd/wm8350/rtc.h b/include/linux/mfd/wm8350/rtc.h index dfda69e9f44..24add2bef6c 100644 --- a/include/linux/mfd/wm8350/rtc.h +++ b/include/linux/mfd/wm8350/rtc.h @@ -261,6 +261,8 @@ struct wm8350_rtc { struct platform_device *pdev; + struct rtc_device *rtc; + int alarm_enabled; /* used over suspend/resume */ }; #endif -- cgit v1.2.3-70-g09d2 From a7fa9851b6dd18824320c4129f26947b3cdb63d8 Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Wed, 12 Nov 2008 13:27:06 -0800 Subject: rtc: basic implementation of Epson RX-8581 I2C Real Time Clock Provide the basic "get" and "set" functionality for the Epson RX-8581 I2C RTC. It currently does not support the RTC's Alarm or Fixed-cycle timer. [akpm@linux-foundation.org: need log2.h for ilog2(), remove unneeded initialisation] Signed-off-by: Martyn Welch Signed-off-by: Alessandro Zummo Cc: David Brownell Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/Kconfig | 8 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-rx8581.c | 281 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 290 insertions(+) create mode 100644 drivers/rtc/rtc-rx8581.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 7951ad2fd99..990020c1dae 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -277,6 +277,14 @@ config RTC_DRV_FM3130 This driver can also be built as a module. If so the module will be called rtc-fm3130. +config RTC_DRV_RX8581 + tristate "Epson RX-8581" + help + If you say yes here you will get support for the Epson RX-8581. + + This driver can also be built as a module. If so the module + will be called rtc-rx8581. + endif # I2C comment "SPI RTC drivers" diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 7a41201e7ef..16368600643 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o +obj-$(CONFIG_RTC_DRV_RX8581) += rtc-rx8581.o obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o diff --git a/drivers/rtc/rtc-rx8581.c b/drivers/rtc/rtc-rx8581.c new file mode 100644 index 00000000000..c9522f3bc21 --- /dev/null +++ b/drivers/rtc/rtc-rx8581.c @@ -0,0 +1,281 @@ +/* + * An I2C driver for the Epson RX8581 RTC + * + * Author: Martyn Welch + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on: rtc-pcf8563.c (An I2C driver for the Philips PCF8563 RTC) + * Copyright 2005-06 Tower Technologies + */ + +#include +#include +#include +#include +#include + +#define DRV_VERSION "0.1" + +#define RX8581_REG_SC 0x00 /* Second in BCD */ +#define RX8581_REG_MN 0x01 /* Minute in BCD */ +#define RX8581_REG_HR 0x02 /* Hour in BCD */ +#define RX8581_REG_DW 0x03 /* Day of Week */ +#define RX8581_REG_DM 0x04 /* Day of Month in BCD */ +#define RX8581_REG_MO 0x05 /* Month in BCD */ +#define RX8581_REG_YR 0x06 /* Year in BCD */ +#define RX8581_REG_RAM 0x07 /* RAM */ +#define RX8581_REG_AMN 0x08 /* Alarm Min in BCD*/ +#define RX8581_REG_AHR 0x09 /* Alarm Hour in BCD */ +#define RX8581_REG_ADM 0x0A +#define RX8581_REG_ADW 0x0A +#define RX8581_REG_TMR0 0x0B +#define RX8581_REG_TMR1 0x0C +#define RX8581_REG_EXT 0x0D /* Extension Register */ +#define RX8581_REG_FLAG 0x0E /* Flag Register */ +#define RX8581_REG_CTRL 0x0F /* Control Register */ + + +/* Flag Register bit definitions */ +#define RX8581_FLAG_UF 0x20 /* Update */ +#define RX8581_FLAG_TF 0x10 /* Timer */ +#define RX8581_FLAG_AF 0x08 /* Alarm */ +#define RX8581_FLAG_VLF 0x02 /* Voltage Low */ + +/* Control Register bit definitions */ +#define RX8581_CTRL_UIE 0x20 /* Update Interrupt Enable */ +#define RX8581_CTRL_TIE 0x10 /* Timer Interrupt Enable */ +#define RX8581_CTRL_AIE 0x08 /* Alarm Interrupt Enable */ +#define RX8581_CTRL_STOP 0x02 /* STOP bit */ +#define RX8581_CTRL_RESET 0x01 /* RESET bit */ + +static struct i2c_driver rx8581_driver; + +/* + * In the routines that deal directly with the rx8581 hardware, we use + * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. + */ +static int rx8581_get_datetime(struct i2c_client *client, struct rtc_time *tm) +{ + unsigned char date[7]; + int data, err; + + /* First we ensure that the "update flag" is not set, we read the + * time and date then re-read the "update flag". If the update flag + * has been set, we know that the time has changed during the read so + * we repeat the whole process again. + */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG); + if (data < 0) { + dev_err(&client->dev, "Unable to read device flags\n"); + return -EIO; + } + + do { + /* If update flag set, clear it */ + if (data & RX8581_FLAG_UF) { + err = i2c_smbus_write_byte_data(client, + RX8581_REG_FLAG, (data & ~RX8581_FLAG_UF)); + if (err != 0) { + dev_err(&client->dev, "Unable to write device " + "flags\n"); + return -EIO; + } + } + + /* Now read time and date */ + err = i2c_smbus_read_i2c_block_data(client, RX8581_REG_SC, + 7, date); + if (err < 0) { + dev_err(&client->dev, "Unable to read date\n"); + return -EIO; + } + + /* Check flag register */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_FLAG); + if (data < 0) { + dev_err(&client->dev, "Unable to read device flags\n"); + return -EIO; + } + } while (data & RX8581_FLAG_UF); + + if (data & RX8581_FLAG_VLF) + dev_info(&client->dev, + "low voltage detected, date/time is not reliable.\n"); + + dev_dbg(&client->dev, + "%s: raw data is sec=%02x, min=%02x, hr=%02x, " + "wday=%02x, mday=%02x, mon=%02x, year=%02x\n", + __func__, + date[0], date[1], date[2], date[3], date[4], date[5], date[6]); + + tm->tm_sec = bcd2bin(date[RX8581_REG_SC] & 0x7F); + tm->tm_min = bcd2bin(date[RX8581_REG_MN] & 0x7F); + tm->tm_hour = bcd2bin(date[RX8581_REG_HR] & 0x3F); /* rtc hr 0-23 */ + tm->tm_wday = ilog2(date[RX8581_REG_DW] & 0x7F); + tm->tm_mday = bcd2bin(date[RX8581_REG_DM] & 0x3F); + tm->tm_mon = bcd2bin(date[RX8581_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ + tm->tm_year = bcd2bin(date[RX8581_REG_YR]); + if (tm->tm_year < 70) + tm->tm_year += 100; /* assume we are in 1970...2069 */ + + + dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __func__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + err = rtc_valid_tm(tm); + if (err < 0) + dev_err(&client->dev, "retrieved date/time is not valid.\n"); + + return err; +} + +static int rx8581_set_datetime(struct i2c_client *client, struct rtc_time *tm) +{ + int data, err; + unsigned char buf[7]; + + dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " + "mday=%d, mon=%d, year=%d, wday=%d\n", + __func__, + tm->tm_sec, tm->tm_min, tm->tm_hour, + tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); + + /* hours, minutes and seconds */ + buf[RX8581_REG_SC] = bin2bcd(tm->tm_sec); + buf[RX8581_REG_MN] = bin2bcd(tm->tm_min); + buf[RX8581_REG_HR] = bin2bcd(tm->tm_hour); + + buf[RX8581_REG_DM] = bin2bcd(tm->tm_mday); + + /* month, 1 - 12 */ + buf[RX8581_REG_MO] = bin2bcd(tm->tm_mon + 1); + + /* year and century */ + buf[RX8581_REG_YR] = bin2bcd(tm->tm_year % 100); + buf[RX8581_REG_DW] = (0x1 << tm->tm_wday); + + /* Stop the clock */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL); + if (data < 0) { + dev_err(&client->dev, "Unable to read control register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG, + (data | RX8581_CTRL_STOP)); + if (err < 0) { + dev_err(&client->dev, "Unable to write control register\n"); + return -EIO; + } + + /* write register's data */ + err = i2c_smbus_write_i2c_block_data(client, RX8581_REG_SC, 7, buf); + if (err < 0) { + dev_err(&client->dev, "Unable to write to date registers\n"); + return -EIO; + } + + /* Restart the clock */ + data = i2c_smbus_read_byte_data(client, RX8581_REG_CTRL); + if (data < 0) { + dev_err(&client->dev, "Unable to read control register\n"); + return -EIO; + } + + err = i2c_smbus_write_byte_data(client, RX8581_REG_FLAG, + (data | ~(RX8581_CTRL_STOP))); + if (err != 0) { + dev_err(&client->dev, "Unable to write control register\n"); + return -EIO; + } + + return 0; +} + +static int rx8581_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + return rx8581_get_datetime(to_i2c_client(dev), tm); +} + +static int rx8581_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + return rx8581_set_datetime(to_i2c_client(dev), tm); +} + +static const struct rtc_class_ops rx8581_rtc_ops = { + .read_time = rx8581_rtc_read_time, + .set_time = rx8581_rtc_set_time, +}; + +static int __devinit rx8581_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct rtc_device *rtc; + + dev_dbg(&client->dev, "%s\n", __func__); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -ENODEV; + + dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); + + rtc = rtc_device_register(rx8581_driver.driver.name, + &client->dev, &rx8581_rtc_ops, THIS_MODULE); + + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + i2c_set_clientdata(client, rtc); + + return 0; +} + +static int __devexit rx8581_remove(struct i2c_client *client) +{ + struct rtc_device *rtc = i2c_get_clientdata(client); + + rtc_device_unregister(rtc); + + return 0; +} + +static const struct i2c_device_id rx8581_id[] = { + { "rx8581", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rx8581_id); + +static struct i2c_driver rx8581_driver = { + .driver = { + .name = "rtc-rx8581", + .owner = THIS_MODULE, + }, + .probe = rx8581_probe, + .remove = __devexit_p(rx8581_remove), + .id_table = rx8581_id, +}; + +static int __init rx8581_init(void) +{ + return i2c_add_driver(&rx8581_driver); +} + +static void __exit rx8581_exit(void) +{ + i2c_del_driver(&rx8581_driver); +} + +MODULE_AUTHOR("Martyn Welch "); +MODULE_DESCRIPTION("Epson RX-8581 RTC driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_init(rx8581_init); +module_exit(rx8581_exit); -- cgit v1.2.3-70-g09d2 From 06de18085122b873012cb23f043e2bdcf5f50923 Mon Sep 17 00:00:00 2001 From: Mark Jackson Date: Wed, 12 Nov 2008 13:27:07 -0800 Subject: rtc: add Dallas DS1390/93/94 RTC chips Add support for the Dallas DS1390/93/94 SPI RTC chip. Signed-off-by: Mark Jackson Acked-by: Alessandro Zummo Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/Kconfig | 11 +++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-ds1390.c | 220 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 232 insertions(+) create mode 100644 drivers/rtc/rtc-ds1390.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 990020c1dae..123092d8a98 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -310,6 +310,17 @@ config RTC_DRV_DS1305 This driver can also be built as a module. If so, the module will be called rtc-ds1305. +config RTC_DRV_DS1390 + tristate "Dallas/Maxim DS1390/93/94" + help + If you say yes here you get support for the DS1390/93/94 chips. + + This driver only supports the RTC feature, and not other chip + features such as alarms and trickle charging. + + This driver can also be built as a module. If so, the module + will be called rtc-ds1390. + config RTC_DRV_MAX6902 tristate "Maxim MAX6902" help diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 16368600643..6e79c912bf9 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_RTC_DRV_DS1302) += rtc-ds1302.o obj-$(CONFIG_RTC_DRV_DS1305) += rtc-ds1305.o obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o obj-$(CONFIG_RTC_DRV_DS1374) += rtc-ds1374.o +obj-$(CONFIG_RTC_DRV_DS1390) += rtc-ds1390.o obj-$(CONFIG_RTC_DRV_DS1511) += rtc-ds1511.o obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o diff --git a/drivers/rtc/rtc-ds1390.c b/drivers/rtc/rtc-ds1390.c new file mode 100644 index 00000000000..599e976bf01 --- /dev/null +++ b/drivers/rtc/rtc-ds1390.c @@ -0,0 +1,220 @@ +/* + * rtc-ds1390.c -- driver for DS1390/93/94 + * + * Copyright (C) 2008 Mercury IMC Ltd + * Written by Mark Jackson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * NOTE : Currently this driver only supports the bare minimum for read + * and write the RTC. The extra features provided by the chip family + * (alarms, trickle charger, different control registers) are unavailable. + */ + +#include +#include +#include +#include + +#define DS1390_REG_100THS 0x00 +#define DS1390_REG_SECONDS 0x01 +#define DS1390_REG_MINUTES 0x02 +#define DS1390_REG_HOURS 0x03 +#define DS1390_REG_DAY 0x04 +#define DS1390_REG_DATE 0x05 +#define DS1390_REG_MONTH_CENT 0x06 +#define DS1390_REG_YEAR 0x07 + +#define DS1390_REG_ALARM_100THS 0x08 +#define DS1390_REG_ALARM_SECONDS 0x09 +#define DS1390_REG_ALARM_MINUTES 0x0A +#define DS1390_REG_ALARM_HOURS 0x0B +#define DS1390_REG_ALARM_DAY_DATE 0x0C + +#define DS1390_REG_CONTROL 0x0D +#define DS1390_REG_STATUS 0x0E +#define DS1390_REG_TRICKLE 0x0F + +struct ds1390 { + struct rtc_device *rtc; + u8 txrx_buf[9]; /* cmd + 8 registers */ +}; + +static void ds1390_set_reg(struct device *dev, unsigned char address, + unsigned char data) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + + /* Set MSB to indicate write */ + chip->txrx_buf[0] = address | 0x80; + chip->txrx_buf[1] = data; + + /* do the i/o */ + spi_write_then_read(spi, chip->txrx_buf, 2, NULL, 0); +} + +static int ds1390_get_reg(struct device *dev, unsigned char address, + unsigned char *data) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + int status; + + if (!data) + return -EINVAL; + + /* Clear MSB to indicate read */ + chip->txrx_buf[0] = address & 0x7f; + /* do the i/o */ + status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 1); + if (status != 0) + return status; + + *data = chip->txrx_buf[1]; + + return 0; +} + +static int ds1390_get_datetime(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + int status; + + /* build the message */ + chip->txrx_buf[0] = DS1390_REG_SECONDS; + + /* do the i/o */ + status = spi_write_then_read(spi, chip->txrx_buf, 1, chip->txrx_buf, 8); + if (status != 0) + return status; + + /* The chip sends data in this order: + * Seconds, Minutes, Hours, Day, Date, Month / Century, Year */ + dt->tm_sec = bcd2bin(chip->txrx_buf[0]); + dt->tm_min = bcd2bin(chip->txrx_buf[1]); + dt->tm_hour = bcd2bin(chip->txrx_buf[2]); + dt->tm_wday = bcd2bin(chip->txrx_buf[3]); + dt->tm_mday = bcd2bin(chip->txrx_buf[4]); + /* mask off century bit */ + dt->tm_mon = bcd2bin(chip->txrx_buf[5] & 0x7f) - 1; + /* adjust for century bit */ + dt->tm_year = bcd2bin(chip->txrx_buf[6]) + ((chip->txrx_buf[5] & 0x80) ? 100 : 0); + + return rtc_valid_tm(dt); +} + +static int ds1390_set_datetime(struct device *dev, struct rtc_time *dt) +{ + struct spi_device *spi = to_spi_device(dev); + struct ds1390 *chip = dev_get_drvdata(dev); + + /* build the message */ + chip->txrx_buf[0] = DS1390_REG_SECONDS | 0x80; + chip->txrx_buf[1] = bin2bcd(dt->tm_sec); + chip->txrx_buf[2] = bin2bcd(dt->tm_min); + chip->txrx_buf[3] = bin2bcd(dt->tm_hour); + chip->txrx_buf[4] = bin2bcd(dt->tm_wday); + chip->txrx_buf[5] = bin2bcd(dt->tm_mday); + chip->txrx_buf[6] = bin2bcd(dt->tm_mon + 1) | + ((dt->tm_year > 99) ? 0x80 : 0x00); + chip->txrx_buf[7] = bin2bcd(dt->tm_year % 100); + + /* do the i/o */ + return spi_write_then_read(spi, chip->txrx_buf, 8, NULL, 0); +} + +static int ds1390_read_time(struct device *dev, struct rtc_time *tm) +{ + return ds1390_get_datetime(dev, tm); +} + +static int ds1390_set_time(struct device *dev, struct rtc_time *tm) +{ + return ds1390_set_datetime(dev, tm); +} + +static const struct rtc_class_ops ds1390_rtc_ops = { + .read_time = ds1390_read_time, + .set_time = ds1390_set_time, +}; + +static int __devinit ds1390_probe(struct spi_device *spi) +{ + struct rtc_device *rtc; + unsigned char tmp; + struct ds1390 *chip; + int res; + + printk(KERN_DEBUG "DS1390 SPI RTC driver\n"); + + rtc = rtc_device_register("ds1390", + &spi->dev, &ds1390_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + printk(KERN_ALERT "RTC : unable to register device\n"); + return PTR_ERR(rtc); + } + + spi->mode = SPI_MODE_3; + spi->bits_per_word = 8; + spi_setup(spi); + + chip = kzalloc(sizeof *chip, GFP_KERNEL); + if (!chip) { + printk(KERN_ALERT "RTC : unable to allocate device memory\n"); + rtc_device_unregister(rtc); + return -ENOMEM; + } + chip->rtc = rtc; + dev_set_drvdata(&spi->dev, chip); + + res = ds1390_get_reg(&spi->dev, DS1390_REG_SECONDS, &tmp); + if (res) { + printk(KERN_ALERT "RTC : unable to read device\n"); + rtc_device_unregister(rtc); + return res; + } + + return 0; +} + +static int __devexit ds1390_remove(struct spi_device *spi) +{ + struct ds1390 *chip = platform_get_drvdata(spi); + struct rtc_device *rtc = chip->rtc; + + if (rtc) + rtc_device_unregister(rtc); + + kfree(chip); + + return 0; +} + +static struct spi_driver ds1390_driver = { + .driver = { + .name = "rtc-ds1390", + .owner = THIS_MODULE, + }, + .probe = ds1390_probe, + .remove = __devexit_p(ds1390_remove), +}; + +static __init int ds1390_init(void) +{ + return spi_register_driver(&ds1390_driver); +} +module_init(ds1390_init); + +static __exit void ds1390_exit(void) +{ + spi_unregister_driver(&ds1390_driver); +} +module_exit(ds1390_exit); + +MODULE_DESCRIPTION("DS1390/93/94 SPI RTC driver"); +MODULE_AUTHOR("Mark Jackson "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From 34e453d45584ea9dc1f62833ace17c79a379deb4 Mon Sep 17 00:00:00 2001 From: Madhusudhan Chikkature Date: Wed, 12 Nov 2008 13:27:08 -0800 Subject: w1: export w1_read_8 function Export the w1_read_8 function for use of drivers. The OMAP HDQ driver(drivers/w1/masters/omap_hdq.c) uses this function. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Madhusudhan Chikkature Acked-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/w1/w1.h | 1 + drivers/w1/w1_io.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h index cdaa6fffbfc..97304bd83ec 100644 --- a/drivers/w1/w1.h +++ b/drivers/w1/w1.h @@ -206,6 +206,7 @@ void w1_slave_detach(struct w1_slave *sl); u8 w1_triplet(struct w1_master *dev, int bdir); void w1_write_8(struct w1_master *, u8); +u8 w1_read_8(struct w1_master *); int w1_reset_bus(struct w1_master *); u8 w1_calc_crc8(u8 *, int); void w1_write_block(struct w1_master *, const u8 *, int); diff --git a/drivers/w1/w1_io.c b/drivers/w1/w1_io.c index f4f82f1f486..0d15b0eaf79 100644 --- a/drivers/w1/w1_io.c +++ b/drivers/w1/w1_io.c @@ -217,7 +217,7 @@ u8 w1_triplet(struct w1_master *dev, int bdir) * @param dev the master device * @return the byte read */ -static u8 w1_read_8(struct w1_master * dev) +u8 w1_read_8(struct w1_master *dev) { int i; u8 res = 0; @@ -230,6 +230,7 @@ static u8 w1_read_8(struct w1_master * dev) return res; } +EXPORT_SYMBOL_GPL(w1_read_8); /** * Writes a series of bytes. -- cgit v1.2.3-70-g09d2 From 9f2bc79f7dd04adda1fc3be510c9b3d436f846c7 Mon Sep 17 00:00:00 2001 From: Madhusudhan Chikkature Date: Wed, 12 Nov 2008 13:27:09 -0800 Subject: hdq driver for OMAP2430/3430 The HDQ/1-Wire module of TI OMAP2430/3430 platforms implement the hardware protocol of the master functions of the Benchmark HDQ and the Dallas Semiconductor 1-Wire protocols. These protocols use a single wire for communication between the master (HDQ/1-Wire controller) and the slave (HDQ/1-Wire external compliant device). This patch provides the HDQ driver to suppport TI OMAP2430/3430 platforms. Signed-off-by: Madhusudhan Chikkature Acked-by: Felipe Balbi Acked-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/w1/masters/Kconfig | 7 + drivers/w1/masters/Makefile | 1 + drivers/w1/masters/omap_hdq.c | 725 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 733 insertions(+) create mode 100644 drivers/w1/masters/omap_hdq.c diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index c4493091c65..a14d5b6e4c7 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -52,5 +52,12 @@ config W1_MASTER_GPIO This support is also available as a module. If so, the module will be called w1-gpio.ko. +config HDQ_MASTER_OMAP + tristate "OMAP HDQ driver" + depends on ARCH_OMAP2430 || ARCH_OMAP34XX + help + Say Y here if you want support for the 1-wire or HDQ Interface + on an OMAP processor. + endmenu diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile index 1420b5bbdda..bc4714a75f3 100644 --- a/drivers/w1/masters/Makefile +++ b/drivers/w1/masters/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_W1_MASTER_DS2490) += ds2490.o obj-$(CONFIG_W1_MASTER_DS2482) += ds2482.o obj-$(CONFIG_W1_MASTER_DS1WM) += ds1wm.o obj-$(CONFIG_W1_MASTER_GPIO) += w1-gpio.o +obj-$(CONFIG_HDQ_MASTER_OMAP) += omap_hdq.o diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c new file mode 100644 index 00000000000..1295625c482 --- /dev/null +++ b/drivers/w1/masters/omap_hdq.c @@ -0,0 +1,725 @@ +/* + * drivers/w1/masters/omap_hdq.c + * + * Copyright (C) 2007 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "../w1.h" +#include "../w1_int.h" + +#define MOD_NAME "OMAP_HDQ:" + +#define OMAP_HDQ_REVISION 0x00 +#define OMAP_HDQ_TX_DATA 0x04 +#define OMAP_HDQ_RX_DATA 0x08 +#define OMAP_HDQ_CTRL_STATUS 0x0c +#define OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK (1<<6) +#define OMAP_HDQ_CTRL_STATUS_CLOCKENABLE (1<<5) +#define OMAP_HDQ_CTRL_STATUS_GO (1<<4) +#define OMAP_HDQ_CTRL_STATUS_INITIALIZATION (1<<2) +#define OMAP_HDQ_CTRL_STATUS_DIR (1<<1) +#define OMAP_HDQ_CTRL_STATUS_MODE (1<<0) +#define OMAP_HDQ_INT_STATUS 0x10 +#define OMAP_HDQ_INT_STATUS_TXCOMPLETE (1<<2) +#define OMAP_HDQ_INT_STATUS_RXCOMPLETE (1<<1) +#define OMAP_HDQ_INT_STATUS_TIMEOUT (1<<0) +#define OMAP_HDQ_SYSCONFIG 0x14 +#define OMAP_HDQ_SYSCONFIG_SOFTRESET (1<<1) +#define OMAP_HDQ_SYSCONFIG_AUTOIDLE (1<<0) +#define OMAP_HDQ_SYSSTATUS 0x18 +#define OMAP_HDQ_SYSSTATUS_RESETDONE (1<<0) + +#define OMAP_HDQ_FLAG_CLEAR 0 +#define OMAP_HDQ_FLAG_SET 1 +#define OMAP_HDQ_TIMEOUT (HZ/5) + +#define OMAP_HDQ_MAX_USER 4 + +static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue); +static int w1_id; + +struct hdq_data { + struct device *dev; + void __iomem *hdq_base; + /* lock status update */ + struct mutex hdq_mutex; + int hdq_usecount; + struct clk *hdq_ick; + struct clk *hdq_fck; + u8 hdq_irqstatus; + /* device lock */ + spinlock_t hdq_spinlock; + /* + * Used to control the call to omap_hdq_get and omap_hdq_put. + * HDQ Protocol: Write the CMD|REG_address first, followed by + * the data wrire or read. + */ + int init_trans; +}; + +static int __init omap_hdq_probe(struct platform_device *pdev); +static int omap_hdq_remove(struct platform_device *pdev); + +static struct platform_driver omap_hdq_driver = { + .probe = omap_hdq_probe, + .remove = omap_hdq_remove, + .driver = { + .name = "omap_hdq", + }, +}; + +static u8 omap_w1_read_byte(void *_hdq); +static void omap_w1_write_byte(void *_hdq, u8 byte); +static u8 omap_w1_reset_bus(void *_hdq); +static void omap_w1_search_bus(void *_hdq, u8 search_type, + w1_slave_found_callback slave_found); + + +static struct w1_bus_master omap_w1_master = { + .read_byte = omap_w1_read_byte, + .write_byte = omap_w1_write_byte, + .reset_bus = omap_w1_reset_bus, + .search = omap_w1_search_bus, +}; + +/* HDQ register I/O routines */ +static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset) +{ + return __raw_readb(hdq_data->hdq_base + offset); +} + +static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val) +{ + __raw_writeb(val, hdq_data->hdq_base + offset); +} + +static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset, + u8 val, u8 mask) +{ + u8 new_val = (__raw_readb(hdq_data->hdq_base + offset) & ~mask) + | (val & mask); + __raw_writeb(new_val, hdq_data->hdq_base + offset); + + return new_val; +} + +/* + * Wait for one or more bits in flag change. + * HDQ_FLAG_SET: wait until any bit in the flag is set. + * HDQ_FLAG_CLEAR: wait until all bits in the flag are cleared. + * return 0 on success and -ETIMEDOUT in the case of timeout. + */ +static int hdq_wait_for_flag(struct hdq_data *hdq_data, u32 offset, + u8 flag, u8 flag_set, u8 *status) +{ + int ret = 0; + unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT; + + if (flag_set == OMAP_HDQ_FLAG_CLEAR) { + /* wait for the flag clear */ + while (((*status = hdq_reg_in(hdq_data, offset)) & flag) + && time_before(jiffies, timeout)) { + schedule_timeout_uninterruptible(1); + } + if (*status & flag) + ret = -ETIMEDOUT; + } else if (flag_set == OMAP_HDQ_FLAG_SET) { + /* wait for the flag set */ + while (!((*status = hdq_reg_in(hdq_data, offset)) & flag) + && time_before(jiffies, timeout)) { + schedule_timeout_uninterruptible(1); + } + if (!(*status & flag)) + ret = -ETIMEDOUT; + } else + return -EINVAL; + + return ret; +} + +/* write out a byte and fill *status with HDQ_INT_STATUS */ +static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status) +{ + int ret; + u8 tmp_status; + unsigned long irqflags; + + *status = 0; + + spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); + /* clear interrupt flags via a dummy read */ + hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + /* ISR loads it with new INT_STATUS */ + hdq_data->hdq_irqstatus = 0; + spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); + + hdq_reg_out(hdq_data, OMAP_HDQ_TX_DATA, val); + + /* set the GO bit */ + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); + /* wait for the TXCOMPLETE bit */ + ret = wait_event_timeout(hdq_wait_queue, + hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); + if (ret == 0) { + dev_dbg(hdq_data->dev, "TX wait elapsed\n"); + goto out; + } + + *status = hdq_data->hdq_irqstatus; + /* check irqstatus */ + if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) { + dev_dbg(hdq_data->dev, "timeout waiting for" + "TXCOMPLETE/RXCOMPLETE, %x", *status); + ret = -ETIMEDOUT; + goto out; + } + + /* wait for the GO bit return to zero */ + ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_FLAG_CLEAR, &tmp_status); + if (ret) { + dev_dbg(hdq_data->dev, "timeout waiting GO bit" + "return to zero, %x", tmp_status); + } + +out: + return ret; +} + +/* HDQ Interrupt service routine */ +static irqreturn_t hdq_isr(int irq, void *_hdq) +{ + struct hdq_data *hdq_data = _hdq; + unsigned long irqflags; + + spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); + hdq_data->hdq_irqstatus = hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); + dev_dbg(hdq_data->dev, "hdq_isr: %x", hdq_data->hdq_irqstatus); + + if (hdq_data->hdq_irqstatus & + (OMAP_HDQ_INT_STATUS_TXCOMPLETE | OMAP_HDQ_INT_STATUS_RXCOMPLETE + | OMAP_HDQ_INT_STATUS_TIMEOUT)) { + /* wake up sleeping process */ + wake_up(&hdq_wait_queue); + } + + return IRQ_HANDLED; +} + +/* HDQ Mode: always return success */ +static u8 omap_w1_reset_bus(void *_hdq) +{ + return 0; +} + +/* W1 search callback function */ +static void omap_w1_search_bus(void *_hdq, u8 search_type, + w1_slave_found_callback slave_found) +{ + u64 module_id, rn_le, cs, id; + + if (w1_id) + module_id = w1_id; + else + module_id = 0x1; + + rn_le = cpu_to_le64(module_id); + /* + * HDQ might not obey truly the 1-wire spec. + * So calculate CRC based on module parameter. + */ + cs = w1_calc_crc8((u8 *)&rn_le, 7); + id = (cs << 56) | module_id; + + slave_found(_hdq, id); +} + +static int _omap_hdq_reset(struct hdq_data *hdq_data) +{ + int ret; + u8 tmp_status; + + hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, OMAP_HDQ_SYSCONFIG_SOFTRESET); + /* + * Select HDQ mode & enable clocks. + * It is observed that INT flags can't be cleared via a read and GO/INIT + * won't return to zero if interrupt is disabled. So we always enable + * interrupt. + */ + hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | + OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); + + /* wait for reset to complete */ + ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_SYSSTATUS, + OMAP_HDQ_SYSSTATUS_RESETDONE, OMAP_HDQ_FLAG_SET, &tmp_status); + if (ret) + dev_dbg(hdq_data->dev, "timeout waiting HDQ reset, %x", + tmp_status); + else { + hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | + OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); + hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, + OMAP_HDQ_SYSCONFIG_AUTOIDLE); + } + + return ret; +} + +/* Issue break pulse to the device */ +static int omap_hdq_break(struct hdq_data *hdq_data) +{ + int ret = 0; + u8 tmp_status; + unsigned long irqflags; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + ret = -EINTR; + goto rtn; + } + + spin_lock_irqsave(&hdq_data->hdq_spinlock, irqflags); + /* clear interrupt flags via a dummy read */ + hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + /* ISR loads it with new INT_STATUS */ + hdq_data->hdq_irqstatus = 0; + spin_unlock_irqrestore(&hdq_data->hdq_spinlock, irqflags); + + /* set the INIT and GO bit */ + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_INITIALIZATION | OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_INITIALIZATION | + OMAP_HDQ_CTRL_STATUS_GO); + + /* wait for the TIMEOUT bit */ + ret = wait_event_timeout(hdq_wait_queue, + hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT); + if (ret == 0) { + dev_dbg(hdq_data->dev, "break wait elapsed\n"); + ret = -EINTR; + goto out; + } + + tmp_status = hdq_data->hdq_irqstatus; + /* check irqstatus */ + if (!(tmp_status & OMAP_HDQ_INT_STATUS_TIMEOUT)) { + dev_dbg(hdq_data->dev, "timeout waiting for TIMEOUT, %x", + tmp_status); + ret = -ETIMEDOUT; + goto out; + } + /* + * wait for both INIT and GO bits rerurn to zero. + * zero wait time expected for interrupt mode. + */ + ret = hdq_wait_for_flag(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_INITIALIZATION | + OMAP_HDQ_CTRL_STATUS_GO, OMAP_HDQ_FLAG_CLEAR, + &tmp_status); + if (ret) + dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits" + "return to zero, %x", tmp_status); + +out: + mutex_unlock(&hdq_data->hdq_mutex); +rtn: + return ret; +} + +static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val) +{ + int ret = 0; + u8 status; + unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + ret = -EINTR; + goto rtn; + } + + if (!hdq_data->hdq_usecount) { + ret = -EINVAL; + goto out; + } + + if (!(hdq_data->hdq_irqstatus & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO, + OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO); + /* + * The RX comes immediately after TX. It + * triggers another interrupt before we + * sleep. So we have to wait for RXCOMPLETE bit. + */ + while (!(hdq_data->hdq_irqstatus + & OMAP_HDQ_INT_STATUS_RXCOMPLETE) + && time_before(jiffies, timeout)) { + schedule_timeout_uninterruptible(1); + } + hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0, + OMAP_HDQ_CTRL_STATUS_DIR); + status = hdq_data->hdq_irqstatus; + /* check irqstatus */ + if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) { + dev_dbg(hdq_data->dev, "timeout waiting for" + "RXCOMPLETE, %x", status); + ret = -ETIMEDOUT; + goto out; + } + } + /* the data is ready. Read it in! */ + *val = hdq_reg_in(hdq_data, OMAP_HDQ_RX_DATA); +out: + mutex_unlock(&hdq_data->hdq_mutex); +rtn: + return 0; + +} + +/* Enable clocks and set the controller to HDQ mode */ +static int omap_hdq_get(struct hdq_data *hdq_data) +{ + int ret = 0; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + ret = -EINTR; + goto rtn; + } + + if (OMAP_HDQ_MAX_USER == hdq_data->hdq_usecount) { + dev_dbg(hdq_data->dev, "attempt to exceed the max use count"); + ret = -EINVAL; + goto out; + } else { + hdq_data->hdq_usecount++; + try_module_get(THIS_MODULE); + if (1 == hdq_data->hdq_usecount) { + if (clk_enable(hdq_data->hdq_ick)) { + dev_dbg(hdq_data->dev, "Can not enable ick\n"); + ret = -ENODEV; + goto clk_err; + } + if (clk_enable(hdq_data->hdq_fck)) { + dev_dbg(hdq_data->dev, "Can not enable fck\n"); + clk_disable(hdq_data->hdq_ick); + ret = -ENODEV; + goto clk_err; + } + + /* make sure HDQ is out of reset */ + if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) & + OMAP_HDQ_SYSSTATUS_RESETDONE)) { + ret = _omap_hdq_reset(hdq_data); + if (ret) + /* back up the count */ + hdq_data->hdq_usecount--; + } else { + /* select HDQ mode & enable clocks */ + hdq_reg_out(hdq_data, OMAP_HDQ_CTRL_STATUS, + OMAP_HDQ_CTRL_STATUS_CLOCKENABLE | + OMAP_HDQ_CTRL_STATUS_INTERRUPTMASK); + hdq_reg_out(hdq_data, OMAP_HDQ_SYSCONFIG, + OMAP_HDQ_SYSCONFIG_AUTOIDLE); + hdq_reg_in(hdq_data, OMAP_HDQ_INT_STATUS); + } + } + } + +clk_err: + clk_put(hdq_data->hdq_ick); + clk_put(hdq_data->hdq_fck); +out: + mutex_unlock(&hdq_data->hdq_mutex); +rtn: + return ret; +} + +/* Disable clocks to the module */ +static int omap_hdq_put(struct hdq_data *hdq_data) +{ + int ret = 0; + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) + return -EINTR; + + if (0 == hdq_data->hdq_usecount) { + dev_dbg(hdq_data->dev, "attempt to decrement use count" + "when it is zero"); + ret = -EINVAL; + } else { + hdq_data->hdq_usecount--; + module_put(THIS_MODULE); + if (0 == hdq_data->hdq_usecount) { + clk_disable(hdq_data->hdq_ick); + clk_disable(hdq_data->hdq_fck); + } + } + mutex_unlock(&hdq_data->hdq_mutex); + + return ret; +} + +/* Read a byte of data from the device */ +static u8 omap_w1_read_byte(void *_hdq) +{ + struct hdq_data *hdq_data = _hdq; + u8 val = 0; + int ret; + + ret = hdq_read_byte(hdq_data, &val); + if (ret) { + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return -EINTR; + } + hdq_data->init_trans = 0; + mutex_unlock(&hdq_data->hdq_mutex); + omap_hdq_put(hdq_data); + return -1; + } + + /* Write followed by a read, release the module */ + if (hdq_data->init_trans) { + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return -EINTR; + } + hdq_data->init_trans = 0; + mutex_unlock(&hdq_data->hdq_mutex); + omap_hdq_put(hdq_data); + } + + return val; +} + +/* Write a byte of data to the device */ +static void omap_w1_write_byte(void *_hdq, u8 byte) +{ + struct hdq_data *hdq_data = _hdq; + int ret; + u8 status; + + /* First write to initialize the transfer */ + if (hdq_data->init_trans == 0) + omap_hdq_get(hdq_data); + + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return; + } + hdq_data->init_trans++; + mutex_unlock(&hdq_data->hdq_mutex); + + ret = hdq_write_byte(hdq_data, byte, &status); + if (ret == 0) { + dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status); + return; + } + + /* Second write, data transfered. Release the module */ + if (hdq_data->init_trans > 1) { + omap_hdq_put(hdq_data); + ret = mutex_lock_interruptible(&hdq_data->hdq_mutex); + if (ret < 0) { + dev_dbg(hdq_data->dev, "Could not acquire mutex\n"); + return; + } + hdq_data->init_trans = 0; + mutex_unlock(&hdq_data->hdq_mutex); + } + + return; +} + +static int __init omap_hdq_probe(struct platform_device *pdev) +{ + struct hdq_data *hdq_data; + struct resource *res; + int ret, irq; + u8 rev; + + hdq_data = kmalloc(sizeof(*hdq_data), GFP_KERNEL); + if (!hdq_data) { + dev_dbg(&pdev->dev, "unable to allocate memory\n"); + ret = -ENOMEM; + goto err_kmalloc; + } + + hdq_data->dev = &pdev->dev; + platform_set_drvdata(pdev, hdq_data); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_dbg(&pdev->dev, "unable to get resource\n"); + ret = -ENXIO; + goto err_resource; + } + + hdq_data->hdq_base = ioremap(res->start, SZ_4K); + if (!hdq_data->hdq_base) { + dev_dbg(&pdev->dev, "ioremap failed\n"); + ret = -EINVAL; + goto err_ioremap; + } + + /* get interface & functional clock objects */ + hdq_data->hdq_ick = clk_get(&pdev->dev, "hdq_ick"); + hdq_data->hdq_fck = clk_get(&pdev->dev, "hdq_fck"); + + if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) { + dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n"); + if (IS_ERR(hdq_data->hdq_ick)) { + ret = PTR_ERR(hdq_data->hdq_ick); + goto err_clk; + } + if (IS_ERR(hdq_data->hdq_fck)) { + ret = PTR_ERR(hdq_data->hdq_fck); + clk_put(hdq_data->hdq_ick); + goto err_clk; + } + } + + hdq_data->hdq_usecount = 0; + mutex_init(&hdq_data->hdq_mutex); + + if (clk_enable(hdq_data->hdq_ick)) { + dev_dbg(&pdev->dev, "Can not enable ick\n"); + ret = -ENODEV; + goto err_intfclk; + } + + if (clk_enable(hdq_data->hdq_fck)) { + dev_dbg(&pdev->dev, "Can not enable fck\n"); + ret = -ENODEV; + goto err_fnclk; + } + + rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION); + dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n", + (rev >> 4) + '0', (rev & 0x0f) + '0', "Interrupt"); + + spin_lock_init(&hdq_data->hdq_spinlock); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = -ENXIO; + goto err_irq; + } + + ret = request_irq(irq, hdq_isr, IRQF_DISABLED, "omap_hdq", hdq_data); + if (ret < 0) { + dev_dbg(&pdev->dev, "could not request irq\n"); + goto err_irq; + } + + omap_hdq_break(hdq_data); + + /* don't clock the HDQ until it is needed */ + clk_disable(hdq_data->hdq_ick); + clk_disable(hdq_data->hdq_fck); + + omap_w1_master.data = hdq_data; + + ret = w1_add_master_device(&omap_w1_master); + if (ret) { + dev_dbg(&pdev->dev, "Failure in registering w1 master\n"); + goto err_w1; + } + + return 0; + +err_w1: +err_irq: + clk_disable(hdq_data->hdq_fck); + +err_fnclk: + clk_disable(hdq_data->hdq_ick); + +err_intfclk: + clk_put(hdq_data->hdq_ick); + clk_put(hdq_data->hdq_fck); + +err_clk: + iounmap(hdq_data->hdq_base); + +err_ioremap: +err_resource: + platform_set_drvdata(pdev, NULL); + kfree(hdq_data); + +err_kmalloc: + return ret; + +} + +static int omap_hdq_remove(struct platform_device *pdev) +{ + struct hdq_data *hdq_data = platform_get_drvdata(pdev); + + mutex_lock(&hdq_data->hdq_mutex); + + if (hdq_data->hdq_usecount) { + dev_dbg(&pdev->dev, "removed when use count is not zero\n"); + return -EBUSY; + } + + mutex_unlock(&hdq_data->hdq_mutex); + + /* remove module dependency */ + clk_put(hdq_data->hdq_ick); + clk_put(hdq_data->hdq_fck); + free_irq(INT_24XX_HDQ_IRQ, hdq_data); + platform_set_drvdata(pdev, NULL); + iounmap(hdq_data->hdq_base); + kfree(hdq_data); + + return 0; +} + +static int __init +omap_hdq_init(void) +{ + return platform_driver_register(&omap_hdq_driver); +} +module_init(omap_hdq_init); + +static void __exit +omap_hdq_exit(void) +{ + platform_driver_unregister(&omap_hdq_driver); +} +module_exit(omap_hdq_exit); + +module_param(w1_id, int, S_IRUSR); +MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection"); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("HDQ driver Library"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From cfbc619033d3a2eee8f7aa9314e21b96cf34d399 Mon Sep 17 00:00:00 2001 From: Madhusudhan Chikkature Date: Wed, 12 Nov 2008 13:27:11 -0800 Subject: hdq: bQ27000 HDQ Slave Interface Driver Provide the BQ27000 slave interface driver. Signed-off-by: Madhusudhan Chikkature Acked-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/w1/slaves/Kconfig | 7 +++ drivers/w1/slaves/Makefile | 2 +- drivers/w1/slaves/w1_bq27000.c | 123 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 131 insertions(+), 1 deletion(-) create mode 100644 drivers/w1/slaves/w1_bq27000.c diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index 3df29a122f8..8d0b1fb1e52 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig @@ -44,4 +44,11 @@ config W1_SLAVE_DS2760 If you are unsure, say N. +config W1_SLAVE_BQ27000 + tristate "BQ27000 slave support" + depends on W1 + help + Say Y here if you want to use a hdq + bq27000 slave support. + endmenu diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile index a8eb7524df1..990f400b6d2 100644 --- a/drivers/w1/slaves/Makefile +++ b/drivers/w1/slaves/Makefile @@ -6,4 +6,4 @@ obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o - +obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o diff --git a/drivers/w1/slaves/w1_bq27000.c b/drivers/w1/slaves/w1_bq27000.c new file mode 100644 index 00000000000..8f4c91f6c68 --- /dev/null +++ b/drivers/w1/slaves/w1_bq27000.c @@ -0,0 +1,123 @@ +/* + * drivers/w1/slaves/w1_bq27000.c + * + * Copyright (C) 2007 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +#include +#include +#include +#include +#include +#include + +#include "../w1.h" +#include "../w1_int.h" +#include "../w1_family.h" + +#define HDQ_CMD_READ (0) +#define HDQ_CMD_WRITE (1<<7) + +static int F_ID; + +void w1_bq27000_write(struct device *dev, u8 buf, u8 reg) +{ + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + + if (!dev) { + pr_info("Could not obtain slave dev ptr\n"); + return; + } + + w1_write_8(sl->master, HDQ_CMD_WRITE | reg); + w1_write_8(sl->master, buf); +} +EXPORT_SYMBOL(w1_bq27000_write); + +int w1_bq27000_read(struct device *dev, u8 reg) +{ + u8 val; + struct w1_slave *sl = container_of(dev, struct w1_slave, dev); + + if (!dev) + return 0; + + w1_write_8(sl->master, HDQ_CMD_READ | reg); + val = w1_read_8(sl->master); + + return val; +} +EXPORT_SYMBOL(w1_bq27000_read); + +static int w1_bq27000_add_slave(struct w1_slave *sl) +{ + int ret; + int id = 1; + struct platform_device *pdev; + + pdev = platform_device_alloc("bq27000-battery", id); + if (!pdev) { + ret = -ENOMEM; + return ret; + } + pdev->dev.parent = &sl->dev; + + ret = platform_device_add(pdev); + if (ret) + goto pdev_add_failed; + + dev_set_drvdata(&sl->dev, pdev); + + goto success; + +pdev_add_failed: + platform_device_unregister(pdev); +success: + return ret; +} + +static void w1_bq27000_remove_slave(struct w1_slave *sl) +{ + struct platform_device *pdev = dev_get_drvdata(&sl->dev); + + platform_device_unregister(pdev); +} + +static struct w1_family_ops w1_bq27000_fops = { + .add_slave = w1_bq27000_add_slave, + .remove_slave = w1_bq27000_remove_slave, +}; + +static struct w1_family w1_bq27000_family = { + .fid = 1, + .fops = &w1_bq27000_fops, +}; + +static int __init w1_bq27000_init(void) +{ + if (F_ID) + w1_bq27000_family.fid = F_ID; + + return w1_register_family(&w1_bq27000_family); +} + +static void __exit w1_bq27000_exit(void) +{ + w1_unregister_family(&w1_bq27000_family); +} + + +module_init(w1_bq27000_init); +module_exit(w1_bq27000_exit); + +module_param(F_ID, int, S_IRUSR); +MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ device"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Texas Instruments Ltd"); +MODULE_DESCRIPTION("HDQ/1-wire slave driver bq27000 battery monitor chip"); -- cgit v1.2.3-70-g09d2 From e0a29382c6f51c278a7e9a788917ff9182f3dba6 Mon Sep 17 00:00:00 2001 From: Madhusudhan Chikkature Date: Wed, 12 Nov 2008 13:27:12 -0800 Subject: hdq: documentation for OMAP HDQ Add a brief document about omap2430/3430 HDQ/1-wire driver. Signed-off-by: Madhusudhan Chikkature Acked-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/w1/masters/omap-hdq | 46 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/w1/masters/omap-hdq diff --git a/Documentation/w1/masters/omap-hdq b/Documentation/w1/masters/omap-hdq new file mode 100644 index 00000000000..ca722e09b6a --- /dev/null +++ b/Documentation/w1/masters/omap-hdq @@ -0,0 +1,46 @@ +Kernel driver for omap HDQ/1-wire module. +======================================== + +Supported chips: +================ + HDQ/1-wire controller on the TI OMAP 2430/3430 platforms. + +A useful link about HDQ basics: +=============================== +http://focus.ti.com/lit/an/slua408/slua408.pdf + +Description: +============ +The HDQ/1-Wire module of TI OMAP2430/3430 platforms implement the hardware +protocol of the master functions of the Benchmark HDQ and the Dallas +Semiconductor 1-Wire protocols. These protocols use a single wire for +communication between the master (HDQ/1-Wire controller) and the slave +(HDQ/1-Wire external compliant device). + +A typical application of the HDQ/1-Wire module is the communication with battery +monitor (gas gauge) integrated circuits. + +The controller supports operation in both HDQ and 1-wire mode. The essential +difference between the HDQ and 1-wire mode is how the slave device responds to +initialization pulse.In HDQ mode, the firmware does not require the host to +create an initialization pulse to the slave.However, the slave can be reset by +using an initialization pulse (also referred to as a break pulse).The slave +does not respond with a presence pulse as it does in the 1-Wire protocol. + +Remarks: +======== +The driver (drivers/w1/masters/omap_hdq.c) supports the HDQ mode of the +controller. In this mode, as we can not read the ID which obeys the W1 +spec(family:id:crc), a module parameter can be passed to the driver which will +be used to calculate the CRC and pass back an appropriate slave ID to the W1 +core. + +By default the master driver and the BQ slave i/f +driver(drivers/w1/slaves/w1_bq27000.c) sets the ID to 1. +Please note to load both the modules with a different ID if required, but note +that the ID used should be same for both master and slave driver loading. + +e.g: +insmod omap_hdq.ko W1_ID=2 +inamod w1_bq27000.ko F_ID=2 + -- cgit v1.2.3-70-g09d2 From 4e17e1db96474af5620e3259754df4cb1c46521c Mon Sep 17 00:00:00 2001 From: Rodolfo Giometti Date: Wed, 12 Nov 2008 13:27:12 -0800 Subject: Add c2 port support C2port implements a two wire serial communication protocol (bit banging) designed to enable in-system programming, debugging, and boundary-scan testing on low pin-count Silicon Labs devices. Currently this code supports only flash programming through sysfs interface but extensions shoud be easy to add. Signed-off-by: Rodolfo Giometti Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ABI/testing/sysfs-c2port | 88 +++ Documentation/c2port.txt | 90 +++ drivers/misc/Kconfig | 2 + drivers/misc/Makefile | 1 + drivers/misc/c2port/Kconfig | 24 + drivers/misc/c2port/Makefile | 1 + drivers/misc/c2port/core.c | 1002 ++++++++++++++++++++++++++++++++ include/linux/c2port.h | 65 +++ 8 files changed, 1273 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-c2port create mode 100644 Documentation/c2port.txt create mode 100644 drivers/misc/c2port/Kconfig create mode 100644 drivers/misc/c2port/Makefile create mode 100644 drivers/misc/c2port/core.c create mode 100644 include/linux/c2port.h diff --git a/Documentation/ABI/testing/sysfs-c2port b/Documentation/ABI/testing/sysfs-c2port new file mode 100644 index 00000000000..716cffc457e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-c2port @@ -0,0 +1,88 @@ +What: /sys/class/c2port/ +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/ directory will contain files and + directories that will provide a unified interface to + the C2 port interface. + +What: /sys/class/c2port/c2portX +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/ directory is related to X-th + C2 port into the system. Each directory will contain files to + manage and control its C2 port. + +What: /sys/class/c2port/c2portX/access +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/access file enable the access + to the C2 port from the system. No commands can be sent + till this entry is set to 0. + +What: /sys/class/c2port/c2portX/dev_id +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/dev_id file show the device ID + of the connected micro. + +What: /sys/class/c2port/c2portX/flash_access +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_access file enable the + access to the on-board flash of the connected micro. + No commands can be sent till this entry is set to 0. + +What: /sys/class/c2port/c2portX/flash_block_size +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_block_size file show + the on-board flash block size of the connected micro. + +What: /sys/class/c2port/c2portX/flash_blocks_num +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_blocks_num file show + the on-board flash blocks number of the connected micro. + +What: /sys/class/c2port/c2portX/flash_data +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_data file export + the content of the on-board flash of the connected micro. + +What: /sys/class/c2port/c2portX/flash_erase +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_erase file execute + the "erase" command on the on-board flash of the connected + micro. + +What: /sys/class/c2port/c2portX/flash_erase +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/flash_erase file show the + on-board flash size of the connected micro. + +What: /sys/class/c2port/c2portX/reset +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/reset file execute a "reset" + command on the connected micro. + +What: /sys/class/c2port/c2portX/rev_id +Date: October 2008 +Contact: Rodolfo Giometti +Description: + The /sys/class/c2port/c2portX/rev_id file show the revision ID + of the connected micro. diff --git a/Documentation/c2port.txt b/Documentation/c2port.txt new file mode 100644 index 00000000000..d9bf93ea439 --- /dev/null +++ b/Documentation/c2port.txt @@ -0,0 +1,90 @@ + C2 port support + --------------- + +(C) Copyright 2007 Rodolfo Giometti + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + + + +Overview +-------- + +This driver implements the support for Linux of Silicon Labs (Silabs) +C2 Interface used for in-system programming of micro controllers. + +By using this driver you can reprogram the in-system flash without EC2 +or EC3 debug adapter. This solution is also useful in those systems +where the micro controller is connected via special GPIOs pins. + +References +---------- + +The C2 Interface main references are at (http://www.silabs.com) +Silicon Laboratories site], see: + +- AN127: FLASH Programming via the C2 Interface at +http://www.silabs.com/public/documents/tpub_doc/anote/Microcontrollers/Small_Form_Factor/en/an127.pdf, and + +- C2 Specification at +http://www.silabs.com/public/documents/tpub_doc/spec/Microcontrollers/en/C2spec.pdf, + +however it implements a two wire serial communication protocol (bit +banging) designed to enable in-system programming, debugging, and +boundary-scan testing on low pin-count Silicon Labs devices. Currently +this code supports only flash programming but extensions are easy to +add. + +Using the driver +---------------- + +Once the driver is loaded you can use sysfs support to get C2port's +info or read/write in-system flash. + +# ls /sys/class/c2port/c2port0/ +access flash_block_size flash_erase rev_id +dev_id flash_blocks_num flash_size subsystem/ +flash_access flash_data reset uevent + +Initially the C2port access is disabled since you hardware may have +such lines multiplexed with other devices so, to get access to the +C2port, you need the command: + +# echo 1 > /sys/class/c2port/c2port0/access + +after that you should read the device ID and revision ID of the +connected micro controller: + +# cat /sys/class/c2port/c2port0/dev_id +8 +# cat /sys/class/c2port/c2port0/rev_id +1 + +However, for security reasons, the in-system flash access in not +enabled yet, to do so you need the command: + +# echo 1 > /sys/class/c2port/c2port0/flash_access + +After that you can read the whole flash: + +# cat /sys/class/c2port/c2port0/flash_data > image + +erase it: + +# echo 1 > /sys/class/c2port/c2port0/flash_erase + +and write it: + +# cat image > /sys/class/c2port/c2port0/flash_data + +after writing you have to reset the device to execute the new code: + +# echo 1 > /sys/class/c2port/c2port0/reset diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index dcac7ca7693..fee7304102a 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -498,4 +498,6 @@ config SGI_GRU_DEBUG This option enables addition debugging code for the SGI GRU driver. If you are unsure, say N. +source "drivers/misc/c2port/Kconfig" + endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index bb14633d136..817f7f5ab3b 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -32,3 +32,4 @@ obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_HP_ILO) += hpilo.o +obj-$(CONFIG_C2PORT) += c2port/ diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig new file mode 100644 index 00000000000..f1bad2b4032 --- /dev/null +++ b/drivers/misc/c2port/Kconfig @@ -0,0 +1,24 @@ +# +# C2 port devices +# + +menuconfig C2PORT + tristate "Silicon Labs C2 port support (EXPERIMENTAL)" + depends on EXPERIMENTAL + default no + help + This option enables support for Silicon Labs C2 port used to + program Silicon micro controller chips (and other 8051 compatible). + + If your board have no such micro controllers you don't need this + interface at all. + + To compile this driver as a module, choose M here: the module will + be called c2port_core. Note that you also need a client module + usually called c2port-*. + + If you are not sure, say N here. + +if C2PORT + +endif # C2PORT diff --git a/drivers/misc/c2port/Makefile b/drivers/misc/c2port/Makefile new file mode 100644 index 00000000000..3c610a2ba5e --- /dev/null +++ b/drivers/misc/c2port/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_C2PORT) += core.o diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c new file mode 100644 index 00000000000..976b35d1d03 --- /dev/null +++ b/drivers/misc/c2port/core.c @@ -0,0 +1,1002 @@ +/* + * Silicon Labs C2 port core Linux support + * + * Copyright (c) 2007 Rodolfo Giometti + * Copyright (c) 2007 Eurotech S.p.A. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define DRIVER_NAME "c2port" +#define DRIVER_VERSION "0.51.0" + +static DEFINE_SPINLOCK(c2port_idr_lock); +static DEFINE_IDR(c2port_idr); + +/* + * Local variables + */ + +static struct class *c2port_class; + +/* + * C2 registers & commands defines + */ + +/* C2 registers */ +#define C2PORT_DEVICEID 0x00 +#define C2PORT_REVID 0x01 +#define C2PORT_FPCTL 0x02 +#define C2PORT_FPDAT 0xB4 + +/* C2 interface commands */ +#define C2PORT_GET_VERSION 0x01 +#define C2PORT_DEVICE_ERASE 0x03 +#define C2PORT_BLOCK_READ 0x06 +#define C2PORT_BLOCK_WRITE 0x07 +#define C2PORT_PAGE_ERASE 0x08 + +/* C2 status return codes */ +#define C2PORT_INVALID_COMMAND 0x00 +#define C2PORT_COMMAND_FAILED 0x02 +#define C2PORT_COMMAND_OK 0x0d + +/* + * C2 port low level signal managements + */ + +static void c2port_reset(struct c2port_device *dev) +{ + struct c2port_ops *ops = dev->ops; + + /* To reset the device we have to keep clock line low for at least + * 20us. + */ + local_irq_disable(); + ops->c2ck_set(dev, 0); + udelay(25); + ops->c2ck_set(dev, 1); + local_irq_enable(); + + udelay(1); +} + +static void c2port_strobe_ck(struct c2port_device *dev) +{ + struct c2port_ops *ops = dev->ops; + + /* During hi-low-hi transition we disable local IRQs to avoid + * interructions since C2 port specification says that it must be + * shorter than 5us, otherwise the microcontroller may consider + * it as a reset signal! + */ + local_irq_disable(); + ops->c2ck_set(dev, 0); + udelay(1); + ops->c2ck_set(dev, 1); + local_irq_enable(); + + udelay(1); +} + +/* + * C2 port basic functions + */ + +static void c2port_write_ar(struct c2port_device *dev, u8 addr) +{ + struct c2port_ops *ops = dev->ops; + int i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (11b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + + /* ADDRESS field */ + for (i = 0; i < 8; i++) { + ops->c2d_set(dev, addr & 0x01); + c2port_strobe_ck(dev); + + addr >>= 1; + } + + /* STOP field */ + ops->c2d_dir(dev, 1); + c2port_strobe_ck(dev); +} + +static int c2port_read_ar(struct c2port_device *dev, u8 *addr) +{ + struct c2port_ops *ops = dev->ops; + int i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (10b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + + /* ADDRESS field */ + ops->c2d_dir(dev, 1); + *addr = 0; + for (i = 0; i < 8; i++) { + *addr >>= 1; /* shift in 8-bit ADDRESS field LSB first */ + + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + *addr |= 0x80; + } + + /* STOP field */ + c2port_strobe_ck(dev); + + return 0; +} + +static int c2port_write_dr(struct c2port_device *dev, u8 data) +{ + struct c2port_ops *ops = dev->ops; + int timeout, i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (01b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 1); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* LENGTH field (00b, LSB first -> 1 byte) */ + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* DATA field */ + for (i = 0; i < 8; i++) { + ops->c2d_set(dev, data & 0x01); + c2port_strobe_ck(dev); + + data >>= 1; + } + + /* WAIT field */ + ops->c2d_dir(dev, 1); + timeout = 20; + do { + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + /* STOP field */ + c2port_strobe_ck(dev); + + return 0; +} + +static int c2port_read_dr(struct c2port_device *dev, u8 *data) +{ + struct c2port_ops *ops = dev->ops; + int timeout, i; + + /* START field */ + c2port_strobe_ck(dev); + + /* INS field (00b, LSB first) */ + ops->c2d_dir(dev, 0); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* LENGTH field (00b, LSB first -> 1 byte) */ + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + ops->c2d_set(dev, 0); + c2port_strobe_ck(dev); + + /* WAIT field */ + ops->c2d_dir(dev, 1); + timeout = 20; + do { + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + /* DATA field */ + *data = 0; + for (i = 0; i < 8; i++) { + *data >>= 1; /* shift in 8-bit DATA field LSB first */ + + c2port_strobe_ck(dev); + if (ops->c2d_get(dev)) + *data |= 0x80; + } + + /* STOP field */ + c2port_strobe_ck(dev); + + return 0; +} + +static int c2port_poll_in_busy(struct c2port_device *dev) +{ + u8 addr; + int ret, timeout = 20; + + do { + ret = (c2port_read_ar(dev, &addr)); + if (ret < 0) + return -EIO; + + if (!(addr & 0x02)) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + return 0; +} + +static int c2port_poll_out_ready(struct c2port_device *dev) +{ + u8 addr; + int ret, timeout = 10000; /* erase flash needs long time... */ + + do { + ret = (c2port_read_ar(dev, &addr)); + if (ret < 0) + return -EIO; + + if (addr & 0x01) + break; + + udelay(1); + } while (--timeout > 0); + if (timeout == 0) + return -EIO; + + return 0; +} + +/* + * sysfs methods + */ + +static ssize_t c2port_show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", c2dev->name); +} + +static ssize_t c2port_show_flash_blocks_num(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + + return sprintf(buf, "%d\n", ops->blocks_num); +} + +static ssize_t c2port_show_flash_block_size(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + + return sprintf(buf, "%d\n", ops->block_size); +} + +static ssize_t c2port_show_flash_size(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + + return sprintf(buf, "%d\n", ops->blocks_num * ops->block_size); +} + +static ssize_t c2port_show_access(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", c2dev->access); +} + +static ssize_t c2port_store_access(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + struct c2port_ops *ops = c2dev->ops; + int status, ret; + + ret = sscanf(buf, "%d", &status); + if (ret != 1) + return -EINVAL; + + mutex_lock(&c2dev->mutex); + + c2dev->access = !!status; + + /* If access is "on" clock should be HIGH _before_ setting the line + * as output and data line should be set as INPUT anyway */ + if (c2dev->access) + ops->c2ck_set(c2dev, 1); + ops->access(c2dev, c2dev->access); + if (c2dev->access) + ops->c2d_dir(c2dev, 1); + + mutex_unlock(&c2dev->mutex); + + return count; +} + +static ssize_t c2port_store_reset(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + /* Check the device access status */ + if (!c2dev->access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + + c2port_reset(c2dev); + c2dev->flash_access = 0; + + mutex_unlock(&c2dev->mutex); + + return count; +} + +static ssize_t __c2port_show_dev_id(struct c2port_device *dev, char *buf) +{ + u8 data; + int ret; + + /* Select DEVICEID register for C2 data register accesses */ + c2port_write_ar(dev, C2PORT_DEVICEID); + + /* Read and return the device ID register */ + ret = c2port_read_dr(dev, &data); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", data); +} + +static ssize_t c2port_show_dev_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + ssize_t ret; + + /* Check the device access status */ + if (!c2dev->access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_show_dev_id(c2dev, buf); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(dev, "cannot read from %s\n", c2dev->name); + + return ret; +} + +static ssize_t __c2port_show_rev_id(struct c2port_device *dev, char *buf) +{ + u8 data; + int ret; + + /* Select REVID register for C2 data register accesses */ + c2port_write_ar(dev, C2PORT_REVID); + + /* Read and return the revision ID register */ + ret = c2port_read_dr(dev, &data); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", data); +} + +static ssize_t c2port_show_rev_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + ssize_t ret; + + /* Check the device access status */ + if (!c2dev->access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_show_rev_id(c2dev, buf); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(c2dev->dev, "cannot read from %s\n", c2dev->name); + + return ret; +} + +static ssize_t c2port_show_flash_access(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", c2dev->flash_access); +} + +static ssize_t __c2port_store_flash_access(struct c2port_device *dev, + int status) +{ + int ret; + + /* Check the device access status */ + if (!dev->access) + return -EBUSY; + + dev->flash_access = !!status; + + /* If flash_access is off we have nothing to do... */ + if (dev->flash_access == 0) + return 0; + + /* Target the C2 flash programming control register for C2 data + * register access */ + c2port_write_ar(dev, C2PORT_FPCTL); + + /* Write the first keycode to enable C2 Flash programming */ + ret = c2port_write_dr(dev, 0x02); + if (ret < 0) + return ret; + + /* Write the second keycode to enable C2 Flash programming */ + ret = c2port_write_dr(dev, 0x01); + if (ret < 0) + return ret; + + /* Delay for at least 20ms to ensure the target is ready for + * C2 flash programming */ + mdelay(25); + + return 0; +} + +static ssize_t c2port_store_flash_access(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + int status; + ssize_t ret; + + ret = sscanf(buf, "%d", &status); + if (ret != 1) + return -EINVAL; + + mutex_lock(&c2dev->mutex); + ret = __c2port_store_flash_access(c2dev, status); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) { + dev_err(c2dev->dev, "cannot enable %s flash programming\n", + c2dev->name); + return ret; + } + + return count; +} + +static ssize_t __c2port_write_flash_erase(struct c2port_device *dev) +{ + u8 status; + int ret; + + /* Target the C2 flash programming data register for C2 data register + * access. + */ + c2port_write_ar(dev, C2PORT_FPDAT); + + /* Send device erase command */ + c2port_write_dr(dev, C2PORT_DEVICE_ERASE); + + /* Wait for input acknowledge */ + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before starting FLASH access sequence */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Send a three-byte arming sequence to enable the device erase. + * If the sequence is not received correctly, the command will be + * ignored. + * Sequence is: 0xde, 0xad, 0xa5. + */ + c2port_write_dr(dev, 0xde); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + c2port_write_dr(dev, 0xad); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + c2port_write_dr(dev, 0xa5); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + return 0; +} + +static ssize_t c2port_store_flash_erase(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct c2port_device *c2dev = dev_get_drvdata(dev); + int ret; + + /* Check the device and flash access status */ + if (!c2dev->access || !c2dev->flash_access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_write_flash_erase(c2dev); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) { + dev_err(c2dev->dev, "cannot erase %s flash\n", c2dev->name); + return ret; + } + + return count; +} + +static ssize_t __c2port_read_flash_data(struct c2port_device *dev, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_ops *ops = dev->ops; + u8 status, nread = 128; + int i, ret; + + /* Check for flash end */ + if (offset >= ops->block_size * ops->blocks_num) + return 0; + + if (ops->block_size * ops->blocks_num - offset < nread) + nread = ops->block_size * ops->blocks_num - offset; + if (count < nread) + nread = count; + if (nread == 0) + return nread; + + /* Target the C2 flash programming data register for C2 data register + * access */ + c2port_write_ar(dev, C2PORT_FPDAT); + + /* Send flash block read command */ + c2port_write_dr(dev, C2PORT_BLOCK_READ); + + /* Wait for input acknowledge */ + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before starting FLASH access sequence */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Send address high byte */ + c2port_write_dr(dev, offset >> 8); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address low byte */ + c2port_write_dr(dev, offset & 0x00ff); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address block size */ + c2port_write_dr(dev, nread); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before reading FLASH block */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Read flash block */ + for (i = 0; i < nread; i++) { + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + ret = c2port_read_dr(dev, buffer+i); + if (ret < 0) + return ret; + } + + return nread; +} + +static ssize_t c2port_read_flash_data(struct kobject *kobj, + struct bin_attribute *attr, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_device *c2dev = + dev_get_drvdata(container_of(kobj, + struct device, kobj)); + ssize_t ret; + + /* Check the device and flash access status */ + if (!c2dev->access || !c2dev->flash_access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_read_flash_data(c2dev, buffer, offset, count); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(c2dev->dev, "cannot read %s flash\n", c2dev->name); + + return ret; +} + +static ssize_t __c2port_write_flash_data(struct c2port_device *dev, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_ops *ops = dev->ops; + u8 status, nwrite = 128; + int i, ret; + + if (nwrite > count) + nwrite = count; + if (ops->block_size * ops->blocks_num - offset < nwrite) + nwrite = ops->block_size * ops->blocks_num - offset; + + /* Check for flash end */ + if (offset >= ops->block_size * ops->blocks_num) + return -EINVAL; + + /* Target the C2 flash programming data register for C2 data register + * access */ + c2port_write_ar(dev, C2PORT_FPDAT); + + /* Send flash block write command */ + c2port_write_dr(dev, C2PORT_BLOCK_WRITE); + + /* Wait for input acknowledge */ + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before starting FLASH access sequence */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Send address high byte */ + c2port_write_dr(dev, offset >> 8); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address low byte */ + c2port_write_dr(dev, offset & 0x00ff); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Send address block size */ + c2port_write_dr(dev, nwrite); + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + /* Should check status before writing FLASH block */ + + /* Wait for status information */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + /* Read flash programming interface status */ + ret = c2port_read_dr(dev, &status); + if (ret < 0) + return ret; + if (status != C2PORT_COMMAND_OK) + return -EBUSY; + + /* Write flash block */ + for (i = 0; i < nwrite; i++) { + ret = c2port_write_dr(dev, *(buffer+i)); + if (ret < 0) + return ret; + + ret = c2port_poll_in_busy(dev); + if (ret < 0) + return ret; + + } + + /* Wait for last flash write to complete */ + ret = c2port_poll_out_ready(dev); + if (ret < 0) + return ret; + + return nwrite; +} + +static ssize_t c2port_write_flash_data(struct kobject *kobj, + struct bin_attribute *attr, + char *buffer, loff_t offset, size_t count) +{ + struct c2port_device *c2dev = + dev_get_drvdata(container_of(kobj, + struct device, kobj)); + int ret; + + /* Check the device access status */ + if (!c2dev->access || !c2dev->flash_access) + return -EBUSY; + + mutex_lock(&c2dev->mutex); + ret = __c2port_write_flash_data(c2dev, buffer, offset, count); + mutex_unlock(&c2dev->mutex); + + if (ret < 0) + dev_err(c2dev->dev, "cannot write %s flash\n", c2dev->name); + + return ret; +} + +/* + * Class attributes + */ + +static struct device_attribute c2port_attrs[] = { + __ATTR(name, 0444, c2port_show_name, NULL), + __ATTR(flash_blocks_num, 0444, c2port_show_flash_blocks_num, NULL), + __ATTR(flash_block_size, 0444, c2port_show_flash_block_size, NULL), + __ATTR(flash_size, 0444, c2port_show_flash_size, NULL), + __ATTR(access, 0644, c2port_show_access, c2port_store_access), + __ATTR(reset, 0200, NULL, c2port_store_reset), + __ATTR(dev_id, 0444, c2port_show_dev_id, NULL), + __ATTR(rev_id, 0444, c2port_show_rev_id, NULL), + + __ATTR(flash_access, 0644, c2port_show_flash_access, + c2port_store_flash_access), + __ATTR(flash_erase, 0200, NULL, c2port_store_flash_erase), + __ATTR_NULL, +}; + +static struct bin_attribute c2port_bin_attrs = { + .attr = { + .name = "flash_data", + .mode = 0644 + }, + .read = c2port_read_flash_data, + .write = c2port_write_flash_data, + /* .size is computed at run-time */ +}; + +/* + * Exported functions + */ + +struct c2port_device *c2port_device_register(char *name, + struct c2port_ops *ops, void *devdata) +{ + struct c2port_device *c2dev; + int id, ret; + + if (unlikely(!ops) || unlikely(!ops->access) || \ + unlikely(!ops->c2d_dir) || unlikely(!ops->c2ck_set) || \ + unlikely(!ops->c2d_get) || unlikely(!ops->c2d_set)) + return ERR_PTR(-EINVAL); + + c2dev = kmalloc(sizeof(struct c2port_device), GFP_KERNEL); + if (unlikely(!c2dev)) + return ERR_PTR(-ENOMEM); + + ret = idr_pre_get(&c2port_idr, GFP_KERNEL); + if (!ret) { + ret = -ENOMEM; + goto error_idr_get_new; + } + + spin_lock_irq(&c2port_idr_lock); + ret = idr_get_new(&c2port_idr, c2dev, &id); + spin_unlock_irq(&c2port_idr_lock); + + if (ret < 0) + goto error_idr_get_new; + c2dev->id = id; + + c2dev->dev = device_create(c2port_class, NULL, 0, c2dev, + "c2port%d", id); + if (unlikely(!c2dev->dev)) { + ret = -ENOMEM; + goto error_device_create; + } + dev_set_drvdata(c2dev->dev, c2dev); + + strncpy(c2dev->name, name, C2PORT_NAME_LEN); + c2dev->ops = ops; + mutex_init(&c2dev->mutex); + + /* Create binary file */ + c2port_bin_attrs.size = ops->blocks_num * ops->block_size; + ret = device_create_bin_file(c2dev->dev, &c2port_bin_attrs); + if (unlikely(ret)) + goto error_device_create_bin_file; + + /* By default C2 port access is off */ + c2dev->access = c2dev->flash_access = 0; + ops->access(c2dev, 0); + + dev_info(c2dev->dev, "C2 port %s added\n", name); + dev_info(c2dev->dev, "%s flash has %d blocks x %d bytes " + "(%d bytes total)\n", + name, ops->blocks_num, ops->block_size, + ops->blocks_num * ops->block_size); + + return c2dev; + +error_device_create_bin_file: + device_destroy(c2port_class, 0); + +error_device_create: + spin_lock_irq(&c2port_idr_lock); + idr_remove(&c2port_idr, id); + spin_unlock_irq(&c2port_idr_lock); + +error_idr_get_new: + kfree(c2dev); + + return ERR_PTR(ret); +} +EXPORT_SYMBOL(c2port_device_register); + +void c2port_device_unregister(struct c2port_device *c2dev) +{ + if (!c2dev) + return; + + dev_info(c2dev->dev, "C2 port %s removed\n", c2dev->name); + + device_remove_bin_file(c2dev->dev, &c2port_bin_attrs); + spin_lock_irq(&c2port_idr_lock); + idr_remove(&c2port_idr, c2dev->id); + spin_unlock_irq(&c2port_idr_lock); + + device_destroy(c2port_class, c2dev->id); + + kfree(c2dev); +} +EXPORT_SYMBOL(c2port_device_unregister); + +/* + * Module stuff + */ + +static int __init c2port_init(void) +{ + printk(KERN_INFO "Silicon Labs C2 port support v. " DRIVER_VERSION + " - (C) 2007 Rodolfo Giometti\n"); + + c2port_class = class_create(THIS_MODULE, "c2port"); + if (!c2port_class) { + printk(KERN_ERR "c2port: failed to allocate class\n"); + return -ENOMEM; + } + c2port_class->dev_attrs = c2port_attrs; + + return 0; +} + +static void __exit c2port_exit(void) +{ + class_destroy(c2port_class); +} + +module_init(c2port_init); +module_exit(c2port_exit); + +MODULE_AUTHOR("Rodolfo Giometti "); +MODULE_DESCRIPTION("Silicon Labs C2 port support v. " DRIVER_VERSION); +MODULE_LICENSE("GPL"); diff --git a/include/linux/c2port.h b/include/linux/c2port.h new file mode 100644 index 00000000000..7b5a2388ba6 --- /dev/null +++ b/include/linux/c2port.h @@ -0,0 +1,65 @@ +/* + * Silicon Labs C2 port Linux support + * + * Copyright (c) 2007 Rodolfo Giometti + * Copyright (c) 2007 Eurotech S.p.A. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation + */ + +#include + +#define C2PORT_NAME_LEN 32 + +/* + * C2 port basic structs + */ + +/* Main struct */ +struct c2port_ops; +struct c2port_device { + unsigned int access:1; + unsigned int flash_access:1; + + int id; + char name[C2PORT_NAME_LEN]; + struct c2port_ops *ops; + struct mutex mutex; /* prevent races during read/write */ + + struct device *dev; + + void *private_data; +}; + +/* Basic operations */ +struct c2port_ops { + /* Flash layout */ + unsigned short block_size; /* flash block size in bytes */ + unsigned short blocks_num; /* flash blocks number */ + + /* Enable or disable the access to C2 port */ + void (*access)(struct c2port_device *dev, int status); + + /* Set C2D data line as input/output */ + void (*c2d_dir)(struct c2port_device *dev, int dir); + + /* Read/write C2D data line */ + int (*c2d_get)(struct c2port_device *dev); + void (*c2d_set)(struct c2port_device *dev, int status); + + /* Write C2CK clock line */ + void (*c2ck_set)(struct c2port_device *dev, int status); +}; + +/* + * Exported functions + */ + +#define to_class_dev(obj) container_of((obj), struct class_device, kobj) +#define to_c2port_device(obj) container_of((obj), struct c2port_device, class) + +extern struct c2port_device *c2port_device_register(char *name, + struct c2port_ops *ops, void *devdata); +extern void c2port_device_unregister(struct c2port_device *dev); -- cgit v1.2.3-70-g09d2 From 65131cd52b9e7c5814298e05c3b7843f13e78d24 Mon Sep 17 00:00:00 2001 From: Rodolfo Giometti Date: Wed, 12 Nov 2008 13:27:14 -0800 Subject: c2port: add c2port support for Eurotech Duramar 2150 Signed-off-by: Rodolfo Giometti Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/c2port/Kconfig | 11 +++ drivers/misc/c2port/Makefile | 2 + drivers/misc/c2port/c2port-duramar2150.c | 158 +++++++++++++++++++++++++++++++ 3 files changed, 171 insertions(+) create mode 100644 drivers/misc/c2port/c2port-duramar2150.c diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig index f1bad2b4032..e46af9a5810 100644 --- a/drivers/misc/c2port/Kconfig +++ b/drivers/misc/c2port/Kconfig @@ -21,4 +21,15 @@ menuconfig C2PORT if C2PORT +config C2PORT_DURAMAR_2150 + tristate "C2 port support for Eurotech's Duramar 2150 (EXPERIMENTAL)" + depends on X86 && C2PORT + default no + help + This option enables C2 support for the Eurotech's Duramar 2150 + on board micro controller. + + To compile this driver as a module, choose M here: the module will + be called c2port-duramar2150. + endif # C2PORT diff --git a/drivers/misc/c2port/Makefile b/drivers/misc/c2port/Makefile index 3c610a2ba5e..3b2cf43d60f 100644 --- a/drivers/misc/c2port/Makefile +++ b/drivers/misc/c2port/Makefile @@ -1 +1,3 @@ obj-$(CONFIG_C2PORT) += core.o + +obj-$(CONFIG_C2PORT_DURAMAR_2150) += c2port-duramar2150.o diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c new file mode 100644 index 00000000000..338dcc12150 --- /dev/null +++ b/drivers/misc/c2port/c2port-duramar2150.c @@ -0,0 +1,158 @@ +/* + * Silicon Labs C2 port Linux support for Eurotech Duramar 2150 + * + * Copyright (c) 2008 Rodolfo Giometti + * Copyright (c) 2008 Eurotech S.p.A. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation + */ + +#include +#include +#include +#include +#include +#include +#include + +#define DATA_PORT 0x325 +#define DIR_PORT 0x326 +#define C2D (1 << 0) +#define C2CK (1 << 1) + +static DEFINE_MUTEX(update_lock); + +/* + * C2 port operations + */ + +static void duramar2150_c2port_access(struct c2port_device *dev, int status) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DIR_PORT); + + /* 0 = input, 1 = output */ + if (status) + outb(v | (C2D | C2CK), DIR_PORT); + else + /* When access is "off" is important that both lines are set + * as inputs or hi-impedence */ + outb(v & ~(C2D | C2CK), DIR_PORT); + + mutex_unlock(&update_lock); +} + +static void duramar2150_c2port_c2d_dir(struct c2port_device *dev, int dir) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DIR_PORT); + + if (dir) + outb(v & ~C2D, DIR_PORT); + else + outb(v | C2D, DIR_PORT); + + mutex_unlock(&update_lock); +} + +static int duramar2150_c2port_c2d_get(struct c2port_device *dev) +{ + return inb(DATA_PORT) & C2D; +} + +static void duramar2150_c2port_c2d_set(struct c2port_device *dev, int status) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DATA_PORT); + + if (status) + outb(v | C2D, DATA_PORT); + else + outb(v & ~C2D, DATA_PORT); + + mutex_unlock(&update_lock); +} + +static void duramar2150_c2port_c2ck_set(struct c2port_device *dev, int status) +{ + u8 v; + + mutex_lock(&update_lock); + + v = inb(DATA_PORT); + + if (status) + outb(v | C2CK, DATA_PORT); + else + outb(v & ~C2CK, DATA_PORT); + + mutex_unlock(&update_lock); +} + +static struct c2port_ops duramar2150_c2port_ops = { + .block_size = 512, /* bytes */ + .blocks_num = 30, /* total flash size: 15360 bytes */ + + .access = duramar2150_c2port_access, + .c2d_dir = duramar2150_c2port_c2d_dir, + .c2d_get = duramar2150_c2port_c2d_get, + .c2d_set = duramar2150_c2port_c2d_set, + .c2ck_set = duramar2150_c2port_c2ck_set, +}; + +static struct c2port_device *duramar2150_c2port_dev; + +/* + * Module stuff + */ + +static int __init duramar2150_c2port_init(void) +{ + struct resource *res; + int ret = 0; + + res = request_region(0x325, 2, "c2port"); + if (!res) + return -EBUSY; + + duramar2150_c2port_dev = c2port_device_register("uc", + &duramar2150_c2port_ops, NULL); + if (!duramar2150_c2port_dev) { + ret = -ENODEV; + goto free_region; + } + + return 0; + +free_region: + release_region(0x325, 2); + return ret; +} + +static void __exit duramar2150_c2port_exit(void) +{ + /* Setup the GPIOs as input by default (access = 0) */ + duramar2150_c2port_access(duramar2150_c2port_dev, 0); + + c2port_device_unregister(duramar2150_c2port_dev); + + release_region(0x325, 2); +} + +module_init(duramar2150_c2port_init); +module_exit(duramar2150_c2port_exit); + +MODULE_AUTHOR("Rodolfo Giometti "); +MODULE_DESCRIPTION("Silicon Labs C2 port Linux support for Duramar 2150"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From bff4056c8b868a4311d5ebd6cbbf09a2c10f4551 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 13 Nov 2008 15:28:21 +0900 Subject: i2c: fix i2c-sh_mobile rx underrun Fix receive path underrun in i2c-sh_mobile driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/i2c/busses/i2c-sh_mobile.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 640cbb23732..3384a717fec 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -318,7 +318,8 @@ static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd) } else data = i2c_op(pd, OP_RX, 0); - pd->msg->buf[real_pos] = data; + if (real_pos >= 0) + pd->msg->buf[real_pos] = data; } while (0); pd->pos++; -- cgit v1.2.3-70-g09d2 From bfbedf787c6b77270679429caadb044b2d33c94c Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 13 Nov 2008 15:33:45 +0900 Subject: sh: early printk port type fix Add PORT_SCIF to unbreak the early printk code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/early_printk.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 6b7d166694e..98a29a78230 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -75,6 +75,7 @@ static struct console bios_console = { #endif static struct uart_port scif_port = { + .type = PORT_SCIF, .mapbase = CONFIG_EARLY_SCIF_CONSOLE_PORT, .membase = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT, }; -- cgit v1.2.3-70-g09d2 From 10840f034e2329150ce0e683e636ea13b268d333 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 13 Nov 2008 15:38:02 +0900 Subject: sh: Don't factor in PAGE_OFFSET for valid_phys_addr_range() check. Signed-off-by: Paul Mundt --- arch/sh/mm/mmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c index 1f3cc3d92d3..8837d511710 100644 --- a/arch/sh/mm/mmap.c +++ b/arch/sh/mm/mmap.c @@ -17,7 +17,7 @@ */ int valid_phys_addr_range(unsigned long addr, size_t count) { - if (addr < (PAGE_OFFSET + (PFN_START << PAGE_SHIFT))) + if (addr < __MEMORY_START) return 0; if (addr + count > __pa(high_memory)) return 0; -- cgit v1.2.3-70-g09d2 From 6e093d9dfffc9a02cd54d36904c62f705f09900a Mon Sep 17 00:00:00 2001 From: Brian Haley Date: Wed, 12 Nov 2008 22:59:21 -0800 Subject: ipv6: routing header fixes This patch fixes two bugs: 1. setsockopt() of anything but a Type 2 routing header should return EINVAL instead of EPERM. Noticed by Shan Wei (shanwei@cn.fujitsu.com). 2. setsockopt()/sendmsg() of a Type 2 routing header with invalid length or segments should return EINVAL. These values are statically fixed in RFC 3775, unlike the variable Type 0 was. Signed-off-by: Brian Haley Signed-off-by: David S. Miller --- net/ipv6/datagram.c | 5 +++++ net/ipv6/ipv6_sockglue.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 410046a8cc9..e44deb8d4df 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -661,6 +661,11 @@ int datagram_send_ctl(struct net *net, switch (rthdr->type) { #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) case IPV6_SRCRT_TYPE_2: + if (rthdr->hdrlen != 2 || + rthdr->segments_left != 1) { + err = -EINVAL; + goto exit_f; + } break; #endif default: diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 4e5eac301f9..2aa294be0c7 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -366,11 +366,16 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, } /* routing header option needs extra check */ + retv = -EINVAL; if (optname == IPV6_RTHDR && opt && opt->srcrt) { struct ipv6_rt_hdr *rthdr = opt->srcrt; switch (rthdr->type) { #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) case IPV6_SRCRT_TYPE_2: + if (rthdr->hdrlen != 2 || + rthdr->segments_left != 1) + goto sticky_done; + break; #endif default: -- cgit v1.2.3-70-g09d2 From 9c0188acf6dd6990bac9cd906cd554a1476c6d12 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 12 Nov 2008 23:23:51 -0800 Subject: net: shy netns_ok check Failure to pass netns_ok check is SILENT, except some MIB counter is incremented somewhere. And adding "netns_ok = 1" (after long head-scratching session) is usually the last step in making some protocol netns-ready... Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- net/ipv4/ip_input.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c index 861978a4f1a..cfb38ac9d69 100644 --- a/net/ipv4/ip_input.c +++ b/net/ipv4/ip_input.c @@ -209,9 +209,17 @@ static int ip_local_deliver_finish(struct sk_buff *skb) hash = protocol & (MAX_INET_PROTOS - 1); ipprot = rcu_dereference(inet_protos[hash]); - if (ipprot != NULL && (net == &init_net || ipprot->netns_ok)) { + if (ipprot != NULL) { int ret; + if (!net_eq(net, &init_net) && !ipprot->netns_ok) { + if (net_ratelimit()) + printk("%s: proto %d isn't netns-ready\n", + __func__, protocol); + kfree_skb(skb); + goto out; + } + if (!ipprot->no_policy) { if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) { kfree_skb(skb); -- cgit v1.2.3-70-g09d2 From 1fa989e80a9a104bf3b81842a5f4c1867d7aa9c4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 12 Nov 2008 11:05:17 +0000 Subject: 9p: restrict RDMA usage Make 9p's RDMA option depend on INET since it uses Infiniband rdma_* functions and that code depends on INET. Otherwise 9p can try to use symbols which don't exist. ERROR: "rdma_destroy_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_connect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_qp" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_route" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_disconnect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_addr" [net/9p/9pnet_rdma.ko] undefined! I used an if/endif block so that the menu items would remain presented together. Also correct an article adjective. Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- net/9p/Kconfig | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/9p/Kconfig b/net/9p/Kconfig index c42c0c400bf..0663f99e977 100644 --- a/net/9p/Kconfig +++ b/net/9p/Kconfig @@ -13,22 +13,24 @@ menuconfig NET_9P If unsure, say N. +if NET_9P + config NET_9P_VIRTIO - depends on NET_9P && EXPERIMENTAL && VIRTIO + depends on EXPERIMENTAL && VIRTIO tristate "9P Virtio Transport (Experimental)" help This builds support for a transports between guest partitions and a host partition. config NET_9P_RDMA - depends on NET_9P && INFINIBAND && EXPERIMENTAL + depends on INET && INFINIBAND && EXPERIMENTAL tristate "9P RDMA Transport (Experimental)" help - This builds support for a RDMA transport. + This builds support for an RDMA transport. config NET_9P_DEBUG bool "Debug information" - depends on NET_9P help Say Y if you want the 9P subsystem to log debug information. +endif -- cgit v1.2.3-70-g09d2 From 5acdc1fa2d9614ecd301f3d27f19bfeabe811ade Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Wed, 12 Nov 2008 23:48:40 -0800 Subject: sparc: struct device - replace bus_id with dev_name(), dev_set_name() Acked-by: Greg Kroah-Hartman Signed-off-by: Kay Sievers Signed-off-by: David S. Miller --- arch/sparc/kernel/of_device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c index 0837bd52e28..0a83bd73765 100644 --- a/arch/sparc/kernel/of_device.c +++ b/arch/sparc/kernel/of_device.c @@ -563,9 +563,9 @@ build_resources: op->dev.parent = parent; op->dev.bus = &of_platform_bus_type; if (!parent) - strcpy(op->dev.bus_id, "root"); + dev_set_name(&op->dev, "root"); else - sprintf(op->dev.bus_id, "%08x", dp->node); + dev_set_name(&op->dev, "%08x", dp->node); if (of_device_register(op)) { printk("%s: Could not register of device.\n", -- cgit v1.2.3-70-g09d2 From e64ed0225bd82d4c108c9f78f46070cfade14fac Mon Sep 17 00:00:00 2001 From: Robert Reif Date: Wed, 12 Nov 2008 23:51:54 -0800 Subject: sparc: Fix tty compile warnings. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes tty compile warnings as sugested by Alan Cox: CC drivers/char/n_tty.o drivers/char/n_tty.c: In function ‘normal_poll’: drivers/char/n_tty.c:1555: warning: array subscript is above array bounds drivers/char/n_tty.c:1564: warning: array subscript is above array bounds drivers/char/n_tty.c: In function ‘read_chan’: drivers/char/n_tty.c:1269: warning: array subscript is above array bounds CC drivers/char/tty_ioctl.o drivers/char/tty_ioctl.c: In function ‘set_termios’: drivers/char/tty_ioctl.c:533: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:537: warning: array subscript is above array bounds drivers/char/tty_ioctl.c: In function ‘tty_mode_ioctl’: drivers/char/tty_ioctl.c:662: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:892: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:896: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:577: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:928: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:934: warning: array subscript is above array bounds Signed-off-by: Robert Reif Signed-off-by: David S. Miller --- arch/sparc/include/asm/termbits.h | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/sparc/include/asm/termbits.h b/arch/sparc/include/asm/termbits.h index d6ca3e2754f..d72dfed1f9d 100644 --- a/arch/sparc/include/asm/termbits.h +++ b/arch/sparc/include/asm/termbits.h @@ -29,10 +29,11 @@ struct termios { tcflag_t c_cflag; /* control mode flags */ tcflag_t c_lflag; /* local mode flags */ cc_t c_line; /* line discipline */ +#ifndef __KERNEL__ cc_t c_cc[NCCS]; /* control characters */ -#ifdef __KERNEL__ +#else + cc_t c_cc[NCCS+2]; /* kernel needs 2 more to hold vmin/vtime */ #define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t)) - cc_t _x_cc[2]; /* We need them to hold vmin/vtime */ #endif }; @@ -42,8 +43,7 @@ struct termios2 { tcflag_t c_cflag; /* control mode flags */ tcflag_t c_lflag; /* local mode flags */ cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - cc_t _x_cc[2]; /* padding to match ktermios */ + cc_t c_cc[NCCS+2]; /* control characters */ speed_t c_ispeed; /* input speed */ speed_t c_ospeed; /* output speed */ }; @@ -54,8 +54,7 @@ struct ktermios { tcflag_t c_cflag; /* control mode flags */ tcflag_t c_lflag; /* local mode flags */ cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - cc_t _x_cc[2]; /* We need them to hold vmin/vtime */ + cc_t c_cc[NCCS+2]; /* control characters */ speed_t c_ispeed; /* input speed */ speed_t c_ospeed; /* output speed */ }; -- cgit v1.2.3-70-g09d2 From 2fe401e38602e853e01376cdb670b0bc4d526a6d Mon Sep 17 00:00:00 2001 From: Adrian Knoth Date: Wed, 12 Nov 2008 16:23:55 -0800 Subject: sched: correct sched-rt-group.txt pathname in init/Kconfig init/Kconfig directs the user to Documentation/sched-rt-group.txt, but the file is actually in Documentation/scheduler/sched-rt-group.txt. This patch corrects the pathname mentioned in init/Kconfig. Signed-off-by: Adrian Knoth Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- init/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/init/Kconfig b/init/Kconfig index 86b00c53fad..2f850d800d9 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -354,7 +354,7 @@ config RT_GROUP_SCHED setting below. If enabled, it will also make it impossible to schedule realtime tasks for non-root users until you allocate realtime bandwidth for them. - See Documentation/sched-rt-group.txt for more information. + See Documentation/scheduler/sched-rt-group.txt for more information. choice depends on GROUP_SCHED -- cgit v1.2.3-70-g09d2 From 2cd0ebc83d771220eeddec91fd6d4cfefc2cc46e Mon Sep 17 00:00:00 2001 From: Francesco VIRLINZI Date: Wed, 15 Oct 2008 11:58:24 +0200 Subject: sh: Fixed the TMU0 reload value on resume This patch fixes the TMU0 interrupt frequency on suspend/resume. During the resume the kernel reprograms the TMU0.ClockEvent mode but if the mode is periodic than the TMU0.TCOR is updated with a random wrong value without taking care latest valid saved value. There was no problem with No_HZ system where TMU0.TCOR isn't used. Signed-off-by: Francesco M. Virlinzi Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/kernel/timers/timer-tmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index aaaf90d06b8..3c61ddd4d43 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -120,7 +120,7 @@ static void tmu_set_mode(enum clock_event_mode mode, { switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - ctrl_outl(ctrl_inl(TMU0_TCNT), TMU0_TCOR); + ctrl_outl(tmu_latest_interval[TMU0], TMU0_TCOR); break; case CLOCK_EVT_MODE_ONESHOT: ctrl_outl(0, TMU0_TCOR); -- cgit v1.2.3-70-g09d2 From 5d52013cbb3d39bde9f5a6023193058eeb112e98 Mon Sep 17 00:00:00 2001 From: Stuart MENEFY Date: Fri, 10 Oct 2008 19:49:30 +0100 Subject: sh: __copy_user function can corrupt the stack in case of exception The __copy_user function can corrupt the stack in the case of a non-trivial length of data, and either of the first two move instructions cause an exception. This is because the fixup for these two instructions is mapped to the no_pop case, but these instructions execute after the stack is pushed. This change creates an explicit NO_POP exception mapping macro, and uses it for the two instructions executed in the trivial case where no stack pushes occur. More information at ST Linux bugzilla: https://bugzilla.stlinux.com/show_bug.cgi?id=4824 Signed-off-by: Dylan Reid Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/lib/copy_page.S | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/arch/sh/lib/copy_page.S b/arch/sh/lib/copy_page.S index 5d12e657be3..43de7e8e4e1 100644 --- a/arch/sh/lib/copy_page.S +++ b/arch/sh/lib/copy_page.S @@ -80,6 +80,11 @@ ENTRY(copy_page) .section __ex_table, "a"; \ .long 9999b, 6000f ; \ .previous +#define EX_NO_POP(...) \ + 9999: __VA_ARGS__ ; \ + .section __ex_table, "a"; \ + .long 9999b, 6005f ; \ + .previous ENTRY(__copy_user) ! Check if small number of bytes mov #11,r0 @@ -139,9 +144,9 @@ EX( mov.b r1,@r4 ) bt 1f 2: -EX( mov.b @r5+,r0 ) +EX_NO_POP( mov.b @r5+,r0 ) dt r6 -EX( mov.b r0,@r4 ) +EX_NO_POP( mov.b r0,@r4 ) bf/s 2b add #1,r4 @@ -150,7 +155,7 @@ EX( mov.b r0,@r4 ) # Exception handler: .section .fixup, "ax" -6000: +6005: mov.l 8000f,r1 mov r3,r0 jmp @r1 -- cgit v1.2.3-70-g09d2 From 272966c070237c8cb540fe67e06df51bc6ea9cc2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 13 Nov 2008 17:46:06 +0900 Subject: serial: sh-sci: Reorder the SCxTDR write after the TDxE clear. Under qemu there is a race between the TDxE read-and-clear and the SCxTDR write. While on hardware it can be gauranteed that the read-and-clear will happen prior to the character being written out, no such assumption can be made under emulation. As this path happens with IRQs off and the hardware itself doesn't care about the ordering, move the SCxTDR write until after the read-and-clear. Signed-off-by: Vladimir Prus Signed-off-by: Paul Mundt --- arch/sh/kernel/early_printk.c | 2 +- drivers/serial/sh-sci.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 98a29a78230..a952dcf9999 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -85,9 +85,9 @@ static void scif_sercon_putc(int c) while (((sci_in(&scif_port, SCFDR) & EPK_FIFO_BITS) >= EPK_FIFO_SIZE)) ; - sci_out(&scif_port, SCxTDR, c); sci_in(&scif_port, SCxSR); sci_out(&scif_port, SCxSR, 0xf3 & ~(0x20 | 0x40)); + sci_out(&scif_port, SCxTDR, c); while ((sci_in(&scif_port, SCxSR) & 0x40) == 0) ; diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 518c0321e4d..165fc010978 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -144,9 +144,9 @@ static void put_char(struct uart_port *port, char c) status = sci_in(port, SCxSR); } while (!(status & SCxSR_TDxE(port))); - sci_out(port, SCxTDR, c); sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + sci_out(port, SCxTDR, c); spin_unlock_irqrestore(&port->lock, flags); } -- cgit v1.2.3-70-g09d2 From 7d672cd7506165818aacf97fdc448cffc72bde37 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 31 Oct 2008 00:07:23 +0100 Subject: HID: fix locking in hidraw_open() As open needs to sleep hidraw was wrong to call it with a spinlock held. Furthermore, open can of course fail which needs to be handled. Signed-off-by: Oliver Neukum Signed-off-by: Jiri Kosina --- drivers/hid/hidraw.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 894d52e05bf..7685ae6808c 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -38,7 +38,7 @@ static int hidraw_major; static struct cdev hidraw_cdev; static struct class *hidraw_class; static struct hidraw *hidraw_table[HIDRAW_MAX_DEVICES]; -static DEFINE_SPINLOCK(minors_lock); +static DEFINE_MUTEX(minors_lock); static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { @@ -159,13 +159,13 @@ static int hidraw_open(struct inode *inode, struct file *file) struct hidraw_list *list; int err = 0; - lock_kernel(); if (!(list = kzalloc(sizeof(struct hidraw_list), GFP_KERNEL))) { err = -ENOMEM; goto out; } - spin_lock(&minors_lock); + lock_kernel(); + mutex_lock(&minors_lock); if (!hidraw_table[minor]) { printk(KERN_EMERG "hidraw device with minor %d doesn't exist\n", minor); @@ -180,13 +180,16 @@ static int hidraw_open(struct inode *inode, struct file *file) file->private_data = list; dev = hidraw_table[minor]; - if (!dev->open++) - dev->hid->ll_driver->open(dev->hid); + if (!dev->open++) { + err = dev->hid->ll_driver->open(dev->hid); + if (err < 0) + dev->open--; + } out_unlock: - spin_unlock(&minors_lock); -out: + mutex_unlock(&minors_lock); unlock_kernel(); +out: return err; } @@ -310,7 +313,7 @@ int hidraw_connect(struct hid_device *hid) result = -EINVAL; - spin_lock(&minors_lock); + mutex_lock(&minors_lock); for (minor = 0; minor < HIDRAW_MAX_DEVICES; minor++) { if (hidraw_table[minor]) @@ -320,9 +323,8 @@ int hidraw_connect(struct hid_device *hid) break; } - spin_unlock(&minors_lock); - if (result) { + mutex_unlock(&minors_lock); kfree(dev); goto out; } @@ -331,14 +333,14 @@ int hidraw_connect(struct hid_device *hid) NULL, "%s%d", "hidraw", minor); if (IS_ERR(dev->dev)) { - spin_lock(&minors_lock); hidraw_table[minor] = NULL; - spin_unlock(&minors_lock); + mutex_unlock(&minors_lock); result = PTR_ERR(dev->dev); kfree(dev); goto out; } + mutex_unlock(&minors_lock); init_waitqueue_head(&dev->wait); INIT_LIST_HEAD(&dev->list); @@ -360,9 +362,9 @@ void hidraw_disconnect(struct hid_device *hid) hidraw->exist = 0; - spin_lock(&minors_lock); + mutex_lock(&minors_lock); hidraw_table[hidraw->minor] = NULL; - spin_unlock(&minors_lock); + mutex_unlock(&minors_lock); device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor)); -- cgit v1.2.3-70-g09d2 From a96d6ef34751093797c3a6c6080733dd7af23d35 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 4 Nov 2008 20:03:45 +0100 Subject: HID: support for new unibody macbooks The unibody MacBook 5 and MacBook Pro 5 come with a new version of the bcm5974 trackpad. This patch adds the USB device ids and all the appropriate quirks, including hid_blacklist. Signed-off-by: Henrik Rydberg Signed-off-by: Jiri Kosina --- drivers/hid/hid-apple.c | 6 ++++++ drivers/hid/hid-core.c | 6 ++++++ drivers/hid/hid-ids.h | 3 +++ 3 files changed, 15 insertions(+) diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index c6ab4ba60c5..ce3c39938f9 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -418,6 +418,12 @@ static const struct hid_device_id apple_devices[] = { .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS), .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI), + .driver_data = APPLE_HAS_FN }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO), + .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS), + .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY), diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index d3671b4049c..4f0b92edb4d 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1250,6 +1250,9 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, @@ -1573,6 +1576,9 @@ static const struct hid_device_id hid_mouse_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { } diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index f05bcbbbb0d..d70075dd3d8 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -82,6 +82,9 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230 #define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231 #define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237 +#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b #define USB_DEVICE_ID_APPLE_ATV_IRCONTROL 0x8241 -- cgit v1.2.3-70-g09d2 From 437184ae8bd1ef923a40b009e37801deae66ad55 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 4 Nov 2008 13:31:38 +0100 Subject: HID: map macbook keys for "Expose" and "Dashboard" On macbooks there are specific keys for the user-space functions Expose and Dashboard, which currently has no counterpart in input.h. This patch adds KEY_SCALE and KEY_DASHBOARD, and maps the keyboard accordingly. Acked-by: Dmitry Torokhov Signed-off-by: Henrik Rydberg Signed-off-by: Jiri Kosina --- drivers/hid/hid-apple.c | 5 +++-- include/linux/input.h | 2 ++ 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index ce3c39938f9..9b97795e45a 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -55,10 +55,11 @@ struct apple_key_translation { static struct apple_key_translation apple_fn_keys[] = { { KEY_BACKSPACE, KEY_DELETE }, + { KEY_ENTER, KEY_INSERT }, { KEY_F1, KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY }, { KEY_F2, KEY_BRIGHTNESSUP, APPLE_FLAG_FKEY }, - { KEY_F3, KEY_FN_F5, APPLE_FLAG_FKEY }, /* Exposé */ - { KEY_F4, KEY_FN_F4, APPLE_FLAG_FKEY }, /* Dashboard */ + { KEY_F3, KEY_SCALE, APPLE_FLAG_FKEY }, + { KEY_F4, KEY_DASHBOARD, APPLE_FLAG_FKEY }, { KEY_F5, KEY_KBDILLUMDOWN, APPLE_FLAG_FKEY }, { KEY_F6, KEY_KBDILLUMUP, APPLE_FLAG_FKEY }, { KEY_F7, KEY_PREVIOUSSONG, APPLE_FLAG_FKEY }, diff --git a/include/linux/input.h b/include/linux/input.h index b86fb5581ce..5341e8251f8 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -238,6 +238,7 @@ struct input_absinfo { #define KEY_KPEQUAL 117 #define KEY_KPPLUSMINUS 118 #define KEY_PAUSE 119 +#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */ #define KEY_KPCOMMA 121 #define KEY_HANGEUL 122 @@ -322,6 +323,7 @@ struct input_absinfo { #define KEY_PAUSECD 201 #define KEY_PROG3 202 #define KEY_PROG4 203 +#define KEY_DASHBOARD 204 /* AL Dashboard */ #define KEY_SUSPEND 205 #define KEY_CLOSE 206 /* AC Close */ #define KEY_PLAY 207 -- cgit v1.2.3-70-g09d2 From 43ff3a48c13f3ddc085271c2eea2985d28c8aa08 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 10 Nov 2008 22:51:50 +0100 Subject: HID: use single threaded work queue for hid_compat Use single threaded work queue for hid_compat I doubt HID really needs to scale over multiple CPUs. So only use a single threaded workqueue for HID_COMPAT. This avoids some excessive thread use on systems with a larger number of CPUs. Signed-off-by: Andi Kleen Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 4f0b92edb4d..e158aa83b92 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1736,7 +1736,7 @@ static int __init hid_init(void) goto err_bus; #ifdef CONFIG_HID_COMPAT - hid_compat_wq = create_workqueue("hid_compat"); + hid_compat_wq = create_singlethread_workqueue("hid_compat"); if (!hid_compat_wq) { hidraw_exit(); goto err; -- cgit v1.2.3-70-g09d2 From e3e14de50dff86331b8f0d701e910146c0049bf5 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Sat, 1 Nov 2008 23:41:46 +0100 Subject: HID: fix start/stop cycle in usbhid driver `stop' left out usbhid->urb* pointers and so the next `start' thought it needs to allocate nothing and used the memory pointers previously pointed to. This led to memory corruption and device malfunction. Also don't forget to clear disconnect flag on start which was left set by the previous `stop'. This fixes echo DEVICE > /sys/bus/hid/drivers/DRIVER/unbind echo DEVICE > /sys/bus/hid/drivers/DRIVER/bind failures. Signed-off-by: Jiri Slaby Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 18e5ddd722c..f0339aefc79 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -781,6 +781,8 @@ static int usbhid_start(struct hid_device *hid) unsigned int n, insize = 0; int ret; + clear_bit(HID_DISCONNECTED, &usbhid->iofl); + usbhid->bufsize = HID_MIN_BUFFER_SIZE; hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize); hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize); @@ -888,6 +890,9 @@ fail: usb_free_urb(usbhid->urbin); usb_free_urb(usbhid->urbout); usb_free_urb(usbhid->urbctrl); + usbhid->urbin = NULL; + usbhid->urbout = NULL; + usbhid->urbctrl = NULL; hid_free_buffers(dev, hid); mutex_unlock(&usbhid->setup); return ret; @@ -924,6 +929,9 @@ static void usbhid_stop(struct hid_device *hid) usb_free_urb(usbhid->urbin); usb_free_urb(usbhid->urbctrl); usb_free_urb(usbhid->urbout); + usbhid->urbin = NULL; /* don't mess up next start */ + usbhid->urbctrl = NULL; + usbhid->urbout = NULL; hid_free_buffers(hid_to_usb_dev(hid), hid); mutex_unlock(&usbhid->setup); -- cgit v1.2.3-70-g09d2 From c91c21c5a6facddce936d82e5bc0c655d04288aa Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Thu, 13 Nov 2008 10:36:11 +0100 Subject: HID: fix kworld fm700 radio hidquirks This patch fixes kworld fm700 usb-radio hidqurks that handled by radio-si470x. Removes it from blacklist entry and places it in ignore entry in hid/hid-core.c The bug went in through the V4L/DVB tree by commit 6a13378a without HID maintainer being involved at all. Signed-off-by: Alexey Klimov Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index e158aa83b92..4b33d145286 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1268,7 +1268,6 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, - { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) }, @@ -1489,6 +1488,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1007) }, { HID_USB_DEVICE(USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA) }, { HID_USB_DEVICE(USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO) }, + { HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_GPEN_560) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) }, { HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) }, -- cgit v1.2.3-70-g09d2 From 62a56582e01b1c5139b235004548e233201df9aa Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Thu, 13 Nov 2008 05:44:50 +0300 Subject: HID: fix radio-mr800 hidquirks This patch fixes radio-mr800 hidqurks. Removes it from blacklist entry and places it in ignore entry in hid/hid-core.c Signed-off-by: Alexey Klimov Signed-off-by: Jiri Kosina --- drivers/hid/hid-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 4b33d145286..147ec591a80 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1255,7 +1255,6 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, - { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, { HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) }, { HID_USB_DEVICE(USB_VENDOR_ID_BRIGHT, USB_DEVICE_ID_BRIGHT_ABNT2) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) }, @@ -1411,6 +1410,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) }, { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM)}, { HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM2)}, + { HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) }, { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) }, -- cgit v1.2.3-70-g09d2 From 4d4e9bb339cfcde7811af10859ba1ce2fe3d46b4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 12 Nov 2008 16:45:04 +0100 Subject: ALSA: hda - Add digital beep playback switch for STAC/IDT codecs The digital beep widget may have no mute control, and always enabling the beep is ofen pretty annoying, especially on laptops. This patch adds a mixer control "PC Beep Playback Switch" when there is no mixer amp mute is found, and controls it on software. Reference: Novell bnc#444572 https://bugzilla.novell.com/show_bug.cgi?id=444572 Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_beep.c | 4 +++ sound/pci/hda/hda_beep.h | 1 + sound/pci/hda/patch_sigmatel.c | 69 ++++++++++++++++++++++++++++++++++++++---- 3 files changed, 68 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index 9b77b3e0fa9..b1796ae1e8f 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -37,6 +37,9 @@ static void snd_hda_generate_beep(struct work_struct *work) container_of(work, struct hda_beep, beep_work); struct hda_codec *codec = beep->codec; + if (!beep->enabled) + return; + /* generate tone */ snd_hda_codec_write_cache(codec, beep->nid, 0, AC_VERB_SET_BEEP_CONTROL, beep->tone); @@ -115,6 +118,7 @@ int snd_hda_attach_beep_device(struct hda_codec *codec, int nid) beep->nid = nid; beep->dev = input_dev; beep->codec = codec; + beep->enabled = 1; codec->beep = beep; INIT_WORK(&beep->beep_work, &snd_hda_generate_beep); diff --git a/sound/pci/hda/hda_beep.h b/sound/pci/hda/hda_beep.h index de4036e6e71..b9679f081ca 100644 --- a/sound/pci/hda/hda_beep.h +++ b/sound/pci/hda/hda_beep.h @@ -31,6 +31,7 @@ struct hda_beep { char phys[32]; int tone; int nid; + int enabled; struct work_struct beep_work; /* scheduled task for beep event */ }; diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 4300a679cd8..1633ef2c654 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2587,8 +2587,10 @@ static struct snd_kcontrol_new stac92xx_control_templates[] = { }; /* add dynamic controls */ -static int stac92xx_add_control_idx(struct sigmatel_spec *spec, int type, - int idx, const char *name, unsigned long val) +static int stac92xx_add_control_temp(struct sigmatel_spec *spec, + struct snd_kcontrol_new *ktemp, + int idx, const char *name, + unsigned long val) { struct snd_kcontrol_new *knew; @@ -2607,20 +2609,29 @@ static int stac92xx_add_control_idx(struct sigmatel_spec *spec, int type, } knew = &spec->kctl_alloc[spec->num_kctl_used]; - *knew = stac92xx_control_templates[type]; + *knew = *ktemp; knew->index = idx; knew->name = kstrdup(name, GFP_KERNEL); - if (! knew->name) + if (!knew->name) return -ENOMEM; knew->private_value = val; spec->num_kctl_used++; return 0; } +static inline int stac92xx_add_control_idx(struct sigmatel_spec *spec, + int type, int idx, const char *name, + unsigned long val) +{ + return stac92xx_add_control_temp(spec, + &stac92xx_control_templates[type], + idx, name, val); +} + /* add dynamic controls */ -static int stac92xx_add_control(struct sigmatel_spec *spec, int type, - const char *name, unsigned long val) +static inline int stac92xx_add_control(struct sigmatel_spec *spec, int type, + const char *name, unsigned long val) { return stac92xx_add_control_idx(spec, type, 0, name, val); } @@ -3062,6 +3073,43 @@ static int stac92xx_auto_create_beep_ctls(struct hda_codec *codec, return 0; } +#ifdef CONFIG_SND_HDA_INPUT_BEEP +#define stac92xx_dig_beep_switch_info snd_ctl_boolean_mono_info + +static int stac92xx_dig_beep_switch_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + ucontrol->value.integer.value[0] = codec->beep->enabled; + return 0; +} + +static int stac92xx_dig_beep_switch_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct hda_codec *codec = snd_kcontrol_chip(kcontrol); + int enabled = !!ucontrol->value.integer.value[0]; + if (codec->beep->enabled != enabled) { + codec->beep->enabled = enabled; + return 1; + } + return 0; +} + +static struct snd_kcontrol_new stac92xx_dig_beep_ctrl = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .info = stac92xx_dig_beep_switch_info, + .get = stac92xx_dig_beep_switch_get, + .put = stac92xx_dig_beep_switch_put, +}; + +static int stac92xx_beep_switch_ctl(struct hda_codec *codec) +{ + return stac92xx_add_control_temp(codec->spec, &stac92xx_dig_beep_ctrl, + 0, "PC Beep Playback Switch", 0); +} +#endif + static int stac92xx_auto_create_mux_input_ctls(struct hda_codec *codec) { struct sigmatel_spec *spec = codec->spec; @@ -3368,6 +3416,7 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out #ifdef CONFIG_SND_HDA_INPUT_BEEP if (spec->digbeep_nid > 0) { hda_nid_t nid = spec->digbeep_nid; + unsigned int caps; err = stac92xx_auto_create_beep_ctls(codec, nid); if (err < 0) @@ -3375,6 +3424,14 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out err = snd_hda_attach_beep_device(codec, nid); if (err < 0) return err; + /* if no beep switch is available, make its own one */ + caps = query_amp_caps(codec, nid, HDA_OUTPUT); + if (codec->beep && + !((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT)) { + err = stac92xx_beep_switch_ctl(codec); + if (err < 0) + return err; + } } #endif -- cgit v1.2.3-70-g09d2 From 6a12afb5640217454cad21e8cf9a74b038fa3717 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 13 Nov 2008 13:08:56 +0100 Subject: ALSA: hda - Missing NULL check in hda_beep.c Added a NULL check of input_allocate_device() in hda_beep.c. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_beep.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c index b1796ae1e8f..3ecd7e797de 100644 --- a/sound/pci/hda/hda_beep.c +++ b/sound/pci/hda/hda_beep.c @@ -88,6 +88,10 @@ int snd_hda_attach_beep_device(struct hda_codec *codec, int nid) snprintf(beep->phys, sizeof(beep->phys), "card%d/codec#%d/beep0", codec->bus->card->number, codec->addr); input_dev = input_allocate_device(); + if (!input_dev) { + kfree(beep); + return -ENOMEM; + } /* setup digital beep device */ input_dev->name = "HDA Digital PCBeep"; -- cgit v1.2.3-70-g09d2 From ee51a1de7e3837577412be269e0100038068e691 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 13 Nov 2008 14:58:31 +0100 Subject: tracing: fix mmiotrace resizing crash Pekka reported a crash when resizing the mmiotrace tracer (if only mmiotrace is enabled). This happens because in that case we do not allocate the max buffer, but we try to use it. Make ring_buffer_resize() idempotent against NULL buffers. Reported-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- kernel/trace/ring_buffer.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 231db209fa8..036456cbb4f 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -538,6 +538,12 @@ int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size) LIST_HEAD(pages); int i, cpu; + /* + * Always succeed at resizing a non-existent buffer: + */ + if (!buffer) + return size; + size = DIV_ROUND_UP(size, BUF_PAGE_SIZE); size *= BUF_PAGE_SIZE; buffer_size = buffer->pages * BUF_PAGE_SIZE; -- cgit v1.2.3-70-g09d2 From 9fa767928fe738aba8e99dae511e91f02fe20b28 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 13 Nov 2008 14:33:51 +0000 Subject: [ARM] dma-mapping: fix compiler warning arch/arm/mm/dma-mapping.c: In function `dma_sync_sg_for_cpu': arch/arm/mm/dma-mapping.c:588: warning: statement with no effect Signed-off-by: Russell King --- arch/arm/include/asm/dma-mapping.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 1cb8602dd9d..4ed149cbb32 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -256,8 +256,17 @@ int dmabounce_sync_for_cpu(struct device *, dma_addr_t, unsigned long, int dmabounce_sync_for_device(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction); #else -#define dmabounce_sync_for_cpu(dev,dma,off,sz,dir) (1) -#define dmabounce_sync_for_device(dev,dma,off,sz,dir) (1) +static inline int dmabounce_sync_for_cpu(struct device *d, dma_addr_t addr, + unsigned long offset, size_t size, enum dma_data_direction dir) +{ + return 1; +} + +static inline int dmabounce_sync_for_device(struct device *d, dma_addr_t addr, + unsigned long offset, size_t size, enum dma_data_direction dir) +{ + return 1; +} /** -- cgit v1.2.3-70-g09d2 From 1e8b0416ca387d754410a4e5d6b92ad6e2fb00eb Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 13 Nov 2008 14:43:03 +0000 Subject: [ARM] integrator,realview,versatile: remove FLASH_* and EPROM_* constants FLASH_* and EPROM_* constants are unused, and clash with drivers: drivers/atm/ambassador.h:257:1: warning: "FLASH_BASE" redefined drivers/atm/ambassador.h:258:1: warning: "FLASH_SIZE" redefined drivers/atm/iphase.h:332:1: warning: "EPROM_SIZE" redefined so remove them. Signed-off-by: Russell King --- arch/arm/mach-integrator/include/mach/platform.h | 19 +------------------ arch/arm/mach-realview/include/mach/platform.h | 19 +------------------ arch/arm/mach-versatile/include/mach/platform.h | 18 +----------------- 3 files changed, 3 insertions(+), 53 deletions(-) diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index 028b87839c0..e00a2624f26 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -407,28 +407,11 @@ */ #define uHAL_MEMORY_SIZE INTEGRATOR_SSRAM_SIZE -/* - * Application Flash - * - */ -#define FLASH_BASE INTEGRATOR_FLASH_BASE -#define FLASH_SIZE INTEGRATOR_FLASH_SIZE -#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) -#define FLASH_BLOCK_SIZE SZ_128K - -/* - * Boot Flash - * - */ -#define EPROM_BASE INTEGRATOR_BOOT_ROM_HI -#define EPROM_SIZE INTEGRATOR_BOOT_ROM_SIZE -#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) - /* * Clean base - dummy * */ -#define CLEAN_BASE EPROM_BASE +#define CLEAN_BASE INTEGRATOR_BOOT_ROM_HI /* * Timer definitions diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h index 4034b54950c..793a3a33271 100644 --- a/arch/arm/mach-realview/include/mach/platform.h +++ b/arch/arm/mach-realview/include/mach/platform.h @@ -238,28 +238,11 @@ #define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */ #define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */ -/* - * Application Flash - * - */ -#define FLASH_BASE REALVIEW_FLASH_BASE -#define FLASH_SIZE REALVIEW_FLASH_SIZE -#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) -#define FLASH_BLOCK_SIZE SZ_128K - -/* - * Boot Flash - * - */ -#define EPROM_BASE REALVIEW_BOOT_ROM_HI -#define EPROM_SIZE REALVIEW_BOOT_ROM_SIZE -#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) - /* * Clean base - dummy * */ -#define CLEAN_BASE EPROM_BASE +#define CLEAN_BASE REALVIEW_BOOT_ROM_HI /* * System controller bit assignment diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h index 27cbe6a3f22..f91ba930ca8 100644 --- a/arch/arm/mach-versatile/include/mach/platform.h +++ b/arch/arm/mach-versatile/include/mach/platform.h @@ -436,28 +436,12 @@ #define SIC_INTMASK_PCI1 (1 << SIC_INT_PCI1) #define SIC_INTMASK_PCI2 (1 << SIC_INT_PCI2) #define SIC_INTMASK_PCI3 (1 << SIC_INT_PCI3) -/* - * Application Flash - * - */ -#define FLASH_BASE VERSATILE_FLASH_BASE -#define FLASH_SIZE VERSATILE_FLASH_SIZE -#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) -#define FLASH_BLOCK_SIZE SZ_128K - -/* - * Boot Flash - * - */ -#define EPROM_BASE VERSATILE_BOOT_ROM_HI -#define EPROM_SIZE VERSATILE_BOOT_ROM_SIZE -#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) /* * Clean base - dummy * */ -#define CLEAN_BASE EPROM_BASE +#define CLEAN_BASE VERSATILE_BOOT_ROM_HI /* * System controller bit assignment -- cgit v1.2.3-70-g09d2 From d9a682a592ff5905d328c648fd30ee7fa12ce8ab Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 13 Nov 2008 14:53:08 +0000 Subject: [ARM] cdb89712,clps7500,h720x: avoid namespace clash for FLASH_* constants Signed-off-by: Russell King --- arch/arm/mach-clps711x/include/mach/hardware.h | 4 ---- arch/arm/mach-clps7500/core.c | 6 +++--- arch/arm/mach-clps7500/include/mach/hardware.h | 6 +++--- arch/arm/mach-h720x/include/mach/boards.h | 6 +++--- drivers/mtd/maps/cdb89712.c | 4 +++- drivers/mtd/maps/h720x-flash.c | 6 +++--- 6 files changed, 15 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index 4c3e101b96c..7cc675c93e2 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -95,10 +95,6 @@ #include /* dynamic ioremap() areas */ -#define FLASH_START 0x00000000 -#define FLASH_SIZE 0x800000 -#define FLASH_WIDTH 4 - #define SRAM_START 0x60000000 #define SRAM_SIZE 0xc000 #define SRAM_WIDTH 4 diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index c3a33b8a5aa..7e247c04d41 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -275,9 +275,9 @@ static struct map_desc cl7500_io_desc[] __initdata = { .length = ISA_SIZE, .type = MT_DEVICE }, { /* Flash */ - .virtual = FLASH_BASE, - .pfn = __phys_to_pfn(FLASH_START), - .length = FLASH_SIZE, + .virtual = CLPS7500_FLASH_BASE, + .pfn = __phys_to_pfn(CLPS7500_FLASH_START), + .length = CLPS7500_FLASH_SIZE, .type = MT_DEVICE }, { /* LED */ .virtual = LED_BASE, diff --git a/arch/arm/mach-clps7500/include/mach/hardware.h b/arch/arm/mach-clps7500/include/mach/hardware.h index d66578a3371..a6ad1d44bad 100644 --- a/arch/arm/mach-clps7500/include/mach/hardware.h +++ b/arch/arm/mach-clps7500/include/mach/hardware.h @@ -39,9 +39,9 @@ #define ISA_SIZE 0x00010000 #define ISA_BASE 0xe1000000 -#define FLASH_START 0x01000000 /* XXX */ -#define FLASH_SIZE 0x01000000 -#define FLASH_BASE 0xe2000000 +#define CLPS7500_FLASH_START 0x01000000 /* XXX */ +#define CLPS7500_FLASH_SIZE 0x01000000 +#define CLPS7500_FLASH_BASE 0xe2000000 #define LED_START 0x0302B000 #define LED_SIZE 0x00001000 diff --git a/arch/arm/mach-h720x/include/mach/boards.h b/arch/arm/mach-h720x/include/mach/boards.h index 079b279e124..38b8e0d61fb 100644 --- a/arch/arm/mach-h720x/include/mach/boards.h +++ b/arch/arm/mach-h720x/include/mach/boards.h @@ -19,9 +19,9 @@ #ifdef CONFIG_ARCH_H7202 /* FLASH */ -#define FLASH_VIRT 0xd0000000 -#define FLASH_PHYS 0x00000000 -#define FLASH_SIZE 0x02000000 +#define H720X_FLASH_VIRT 0xd0000000 +#define H720X_FLASH_PHYS 0x00000000 +#define H720X_FLASH_SIZE 0x02000000 /* onboard LAN controller */ # define ETH0_PHYS 0x08000000 diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c index e5059aa3c72..d7bc4299b19 100644 --- a/drivers/mtd/maps/cdb89712.c +++ b/drivers/mtd/maps/cdb89712.c @@ -15,7 +15,9 @@ #include - +#define FLASH_START 0x00000000 +#define FLASH_SIZE 0x800000 +#define FLASH_WIDTH 4 static struct mtd_info *flash_mtd; diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c index 35fef655ccc..3b959fad1c4 100644 --- a/drivers/mtd/maps/h720x-flash.c +++ b/drivers/mtd/maps/h720x-flash.c @@ -24,8 +24,8 @@ static struct mtd_info *mymtd; static struct map_info h720x_map = { .name = "H720X", .bankwidth = 4, - .size = FLASH_SIZE, - .phys = FLASH_PHYS, + .size = H720X_FLASH_SIZE, + .phys = H720X_FLASH_PHYS, }; static struct mtd_partition h720x_partitions[] = { @@ -70,7 +70,7 @@ int __init h720x_mtd_init(void) char *part_type = NULL; - h720x_map.virt = ioremap(FLASH_PHYS, FLASH_SIZE); + h720x_map.virt = ioremap(h720x_map.phys, h720x_map.size); if (!h720x_map.virt) { printk(KERN_ERR "H720x-MTD: ioremap failed\n"); -- cgit v1.2.3-70-g09d2 From 8959dabdf2f8f9ce982a2c4cfe6d1652a2fb6320 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 13 Nov 2008 15:02:41 +0000 Subject: [ARM] cdb89712: avoid namespace clashes with SRAM_ and BOOTROM_ constants Signed-off-by: Russell King --- arch/arm/mach-clps711x/include/mach/hardware.h | 18 ------------------ drivers/mtd/maps/cdb89712.c | 11 ++++++++++- 2 files changed, 10 insertions(+), 19 deletions(-) diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index 7cc675c93e2..b3ebe9e4871 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -94,16 +94,6 @@ #include #include -/* dynamic ioremap() areas */ -#define SRAM_START 0x60000000 -#define SRAM_SIZE 0xc000 -#define SRAM_WIDTH 4 - -#define BOOTROM_START 0x70000000 -#define BOOTROM_SIZE 0x80 -#define BOOTROM_WIDTH 4 - - /* static cdb89712_map_io() areas */ #define REGISTER_START 0x80000000 #define REGISTER_SIZE 0x4000 @@ -194,14 +184,6 @@ #define CEIVA_FLASH_SIZE 0x100000 #define CEIVA_FLASH_WIDTH 2 -#define SRAM_START 0x60000000 -#define SRAM_SIZE 0xc000 -#define SRAM_WIDTH 4 - -#define BOOTROM_START 0x70000000 -#define BOOTROM_SIZE 0x80 -#define BOOTROM_WIDTH 4 - /* * SED1355 LCD controller */ diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c index d7bc4299b19..8d92d8db9a9 100644 --- a/drivers/mtd/maps/cdb89712.c +++ b/drivers/mtd/maps/cdb89712.c @@ -14,11 +14,20 @@ #include #include - +/* dynamic ioremap() areas */ #define FLASH_START 0x00000000 #define FLASH_SIZE 0x800000 #define FLASH_WIDTH 4 +#define SRAM_START 0x60000000 +#define SRAM_SIZE 0xc000 +#define SRAM_WIDTH 4 + +#define BOOTROM_START 0x70000000 +#define BOOTROM_SIZE 0x80 +#define BOOTROM_WIDTH 4 + + static struct mtd_info *flash_mtd; struct map_info cdb89712_flash_map = { -- cgit v1.2.3-70-g09d2 From 02f5621042e3f7e2fb6c741cbe5ee7c1f3caf354 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Wed, 5 Nov 2008 22:18:19 +0000 Subject: Kconfig: SLUB is the default slab allocator In 2007, a0acd820807680d2ccc4ef3448387fcdbf152c73 changed the default slab allocator to SLUB, but the SLAB help text still says SLAB is the default. This change fixes that. Signed-off-by: Simon Arlott Signed-off-by: Pekka Enberg --- init/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/init/Kconfig b/init/Kconfig index 86b00c53fad..226da2733c1 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -771,8 +771,7 @@ config SLAB help The regular slab allocator that is established and known to work well in all environments. It organizes cache hot objects in - per cpu and per node queues. SLAB is the default choice for - a slab allocator. + per cpu and per node queues. config SLUB bool "SLUB (Unqueued Allocator)" @@ -781,7 +780,8 @@ config SLUB instead of managing queues of cached objects (SLAB approach). Per cpu caching is realized using slabs of objects instead of queues of objects. SLUB can use memory efficiently - and has enhanced diagnostics. + and has enhanced diagnostics. SLUB is the default choice for + a slab allocator. config SLOB depends on EMBEDDED -- cgit v1.2.3-70-g09d2 From d7de4c1dc3a2faca0bf05d9e342f885cb2696766 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 13 Nov 2008 20:40:12 +0200 Subject: slab: document SLAB_DESTROY_BY_RCU Explain this SLAB_DESTROY_BY_RCU thing... [hugh@veritas.com: add a pointer to comment in mm/slab.c] Signed-off-by: Peter Zijlstra Acked-by: Jens Axboe Acked-by: Paul E. McKenney Acked-by: Christoph Lameter Signed-off-by: Hugh Dickins Signed-off-by: Pekka Enberg --- include/linux/slab.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/include/linux/slab.h b/include/linux/slab.h index ba965c84ae0..000da12b5cf 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -23,6 +23,34 @@ #define SLAB_CACHE_DMA 0x00004000UL /* Use GFP_DMA memory */ #define SLAB_STORE_USER 0x00010000UL /* DEBUG: Store the last owner for bug hunting */ #define SLAB_PANIC 0x00040000UL /* Panic if kmem_cache_create() fails */ +/* + * SLAB_DESTROY_BY_RCU - **WARNING** READ THIS! + * + * This delays freeing the SLAB page by a grace period, it does _NOT_ + * delay object freeing. This means that if you do kmem_cache_free() + * that memory location is free to be reused at any time. Thus it may + * be possible to see another object there in the same RCU grace period. + * + * This feature only ensures the memory location backing the object + * stays valid, the trick to using this is relying on an independent + * object validation pass. Something like: + * + * rcu_read_lock() + * again: + * obj = lockless_lookup(key); + * if (obj) { + * if (!try_get_ref(obj)) // might fail for free objects + * goto again; + * + * if (obj->key != key) { // not the object we expected + * put_ref(obj); + * goto again; + * } + * } + * rcu_read_unlock(); + * + * See also the comment on struct slab_rcu in mm/slab.c. + */ #define SLAB_DESTROY_BY_RCU 0x00080000UL /* Defer freeing slabs to RCU */ #define SLAB_MEM_SPREAD 0x00100000UL /* Spread some memory over cpuset */ #define SLAB_TRACE 0x00200000UL /* Trace allocations and frees */ -- cgit v1.2.3-70-g09d2 From 278afcbf4fe964230eba67f8fb8235e8b7e63ffb Mon Sep 17 00:00:00 2001 From: David Teigland Date: Thu, 13 Nov 2008 13:22:34 -0600 Subject: dlm: fix shutdown cleanup Fixes a regression from commit 0f8e0d9a317406612700426fad3efab0b7bbc467, "dlm: allow multiple lockspace creates". An extraneous 'else' slipped into a code fragment being moved from release_lockspace() to dlm_release_lockspace(). The result of the unwanted 'else' is that dlm threads and structures are not stopped and cleaned up when the final dlm lockspace is removed. Trying to create a new lockspace again afterward will fail with "kmem_cache_create: duplicate cache dlm_conn" because the cache was not previously destroyed. Signed-off-by: David Teigland --- fs/dlm/lockspace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c index d910501de6d..8d86b7960f0 100644 --- a/fs/dlm/lockspace.c +++ b/fs/dlm/lockspace.c @@ -812,7 +812,7 @@ int dlm_release_lockspace(void *lockspace, int force) error = release_lockspace(ls, force); if (!error) ls_count--; - else if (!ls_count) + if (!ls_count) threads_stop(); mutex_unlock(&ls_lock); -- cgit v1.2.3-70-g09d2 From 906bf113beb07a76b665c3863aa864acdc8f9950 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 13 Nov 2008 18:55:54 +0100 Subject: fix cpumask build breakage on parisc Commit 2d3854a37e8b767a51aba38ed6d22817b0631e33 ("cpumask: introduce new API, without changing anything") introduced a build breakage on parisc. This trivial patch fixes it. Signed-off-by: Helge Deller Cc: Rusty Russell Cc: Andrew Morton Cc: Kyle Mc Martin Signed-off-by: Linus Torvalds --- arch/parisc/include/asm/smp.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/parisc/include/asm/smp.h b/arch/parisc/include/asm/smp.h index 398cdbaf4e5..409e698f436 100644 --- a/arch/parisc/include/asm/smp.h +++ b/arch/parisc/include/asm/smp.h @@ -44,8 +44,6 @@ extern void arch_send_call_function_ipi(cpumask_t mask); #define PROC_CHANGE_PENALTY 15 /* Schedule penalty */ -extern unsigned long cpu_present_mask; - #define raw_smp_processor_id() (current_thread_info()->cpu) #else /* CONFIG_SMP */ -- cgit v1.2.3-70-g09d2 From 3b7952109361c684caf0c50474da8662ecc81019 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 13 Nov 2008 19:45:32 +0000 Subject: [CIFS] Fix cifs reconnection flags In preparation for Jeff's big umount/mount fixes to remove the possibility of various races in cifs mount and linked list handling of sessions, sockets and tree connections, this patch cleans up some repetitive code in cifs_mount, and addresses a problem with ses->status and tcon->tidStatus in which we were overloading the "need_reconnect" state with other status in that field. So the "need_reconnect" flag has been broken out from those two state fields (need reconnect was not mutually exclusive from some of the other possible tid and ses states). In addition, a few exit cases in cifs_mount were cleaned up, and a problem with a tcon flag (for lease support) was not being set consistently for the 2nd mount of the same share CC: Jeff Layton CC: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 2 +- fs/cifs/cifsglob.h | 5 + fs/cifs/cifssmb.c | 40 ++++---- fs/cifs/connect.c | 262 ++++++++++++++++++++++++++--------------------------- fs/cifs/file.c | 2 +- 5 files changed, 160 insertions(+), 151 deletions(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index ac5915d61dc..903bbd6449d 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1013,7 +1013,7 @@ static int cifs_oplock_thread(void *dummyarg) not bother sending an oplock release if session to server still is disconnected since oplock already released by the server in that case */ - if (pTcon->tidStatus != CifsNeedReconnect) { + if (!pTcon->need_reconnect) { rc = CIFSSMBLock(0, pTcon, netfid, 0 /* len */ , 0 /* offset */, 0, 0, LOCKING_ANDX_OPLOCK_RELEASE, diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 1cb1189f24e..dc0aa140f1b 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -122,6 +122,8 @@ struct cifs_cred { */ struct TCP_Server_Info { + struct list_head tcp_ses_list; + struct list_head smb_ses_list; /* 15 character server name + 0x20 16th byte indicating type = srv */ char server_RFC1001_name[SERVER_NAME_LEN_WITH_NULL]; char unicode_server_Name[SERVER_NAME_LEN_WITH_NULL * 2]; @@ -195,6 +197,7 @@ struct cifsUidInfo { */ struct cifsSesInfo { struct list_head cifsSessionList; + struct list_head tcon_list; struct semaphore sesSem; #if 0 struct cifsUidInfo *uidInfo; /* pointer to user info */ @@ -216,6 +219,7 @@ struct cifsSesInfo { char userName[MAX_USERNAME_SIZE + 1]; char *domainName; char *password; + bool need_reconnect:1; /* connection reset, uid now invalid */ }; /* no more than one of the following three session flags may be set */ #define CIFS_SES_NT4 1 @@ -288,6 +292,7 @@ struct cifsTconInfo { bool unix_ext:1; /* if false disable Linux extensions to CIFS protocol for this mount even if server would support */ bool local_lease:1; /* check leases (only) on local system not remote */ + bool need_reconnect:1; /* connection reset, tid now invalid */ /* BB add field for back pointer to sb struct(s)? */ }; diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index d5eac48fc41..7f0651b6957 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -190,10 +190,10 @@ small_smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, /* need to prevent multiple threads trying to simultaneously reconnect the same SMB session */ down(&tcon->ses->sesSem); - if (tcon->ses->status == CifsNeedReconnect) + if (tcon->ses->need_reconnect) rc = cifs_setup_session(0, tcon->ses, nls_codepage); - if (!rc && (tcon->tidStatus == CifsNeedReconnect)) { + if (!rc && (tcon->need_reconnect)) { mark_open_files_invalid(tcon); rc = CIFSTCon(0, tcon->ses, tcon->treeName, tcon, nls_codepage); @@ -295,7 +295,7 @@ smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, check for tcp and smb session status done differently for those three - in the calling routine */ if (tcon) { - if (tcon->tidStatus == CifsExiting) { + if (tcon->need_reconnect) { /* only tree disconnect, open, and write, (and ulogoff which does not have tcon) are allowed as we start force umount */ @@ -337,10 +337,10 @@ smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, /* need to prevent multiple threads trying to simultaneously reconnect the same SMB session */ down(&tcon->ses->sesSem); - if (tcon->ses->status == CifsNeedReconnect) + if (tcon->ses->need_reconnect) rc = cifs_setup_session(0, tcon->ses, nls_codepage); - if (!rc && (tcon->tidStatus == CifsNeedReconnect)) { + if (!rc && (tcon->need_reconnect)) { mark_open_files_invalid(tcon); rc = CIFSTCon(0, tcon->ses, tcon->treeName, tcon, nls_codepage); @@ -759,7 +759,7 @@ CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon) /* No need to return error on this operation if tid invalidated and closed on server already e.g. due to tcp session crashing */ - if (tcon->tidStatus == CifsNeedReconnect) { + if (tcon->need_reconnect) { up(&tcon->tconSem); return 0; } @@ -806,32 +806,36 @@ CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses) up(&ses->sesSem); return -EBUSY; } + + if (ses->server == NULL) + return -EIO; + + if (ses->need_reconnect) + goto session_already_dead; /* no need to send SMBlogoff if uid + already closed due to reconnect */ rc = small_smb_init(SMB_COM_LOGOFF_ANDX, 2, NULL, (void **)&pSMB); if (rc) { up(&ses->sesSem); return rc; } - if (ses->server) { - pSMB->hdr.Mid = GetNextMid(ses->server); + pSMB->hdr.Mid = GetNextMid(ses->server); - if (ses->server->secMode & + if (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) pSMB->hdr.Flags2 |= SMBFLG2_SECURITY_SIGNATURE; - } pSMB->hdr.Uid = ses->Suid; pSMB->AndXCommand = 0xFF; rc = SendReceiveNoRsp(xid, ses, (struct smb_hdr *) pSMB, 0); - if (ses->server) { - atomic_dec(&ses->server->socketUseCount); - if (atomic_read(&ses->server->socketUseCount) == 0) { - spin_lock(&GlobalMid_Lock); - ses->server->tcpStatus = CifsExiting; - spin_unlock(&GlobalMid_Lock); - rc = -ESHUTDOWN; - } +session_already_dead: + atomic_dec(&ses->server->socketUseCount); + if (atomic_read(&ses->server->socketUseCount) == 0) { + spin_lock(&GlobalMid_Lock); + ses->server->tcpStatus = CifsExiting; + spin_unlock(&GlobalMid_Lock); + rc = -ESHUTDOWN; } up(&ses->sesSem); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index c682be8f298..c1cd1217c99 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -149,7 +149,7 @@ cifs_reconnect(struct TCP_Server_Info *server) ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList); if (ses->server) { if (ses->server == server) { - ses->status = CifsNeedReconnect; + ses->need_reconnect = true; ses->ipc_tid = 0; } } @@ -158,7 +158,7 @@ cifs_reconnect(struct TCP_Server_Info *server) list_for_each(tmp, &GlobalTreeConnectionList) { tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); if ((tcon->ses) && (tcon->ses->server == server)) - tcon->tidStatus = CifsNeedReconnect; + tcon->need_reconnect = true; } read_unlock(&GlobalSMBSeslock); /* do not want to be sending data on a socket we are freeing */ @@ -1891,6 +1891,92 @@ kill_cifsd(struct TCP_Server_Info *server) force_sig(SIGKILL, task); } +static void setup_cifs_sb(struct smb_vol *pvolume_info, + struct cifs_sb_info *cifs_sb) +{ + if (pvolume_info->rsize > CIFSMaxBufSize) { + cERROR(1, ("rsize %d too large, using MaxBufSize", + pvolume_info->rsize)); + cifs_sb->rsize = CIFSMaxBufSize; + } else if ((pvolume_info->rsize) && + (pvolume_info->rsize <= CIFSMaxBufSize)) + cifs_sb->rsize = pvolume_info->rsize; + else /* default */ + cifs_sb->rsize = CIFSMaxBufSize; + + if (pvolume_info->wsize > PAGEVEC_SIZE * PAGE_CACHE_SIZE) { + cERROR(1, ("wsize %d too large, using 4096 instead", + pvolume_info->wsize)); + cifs_sb->wsize = 4096; + } else if (pvolume_info->wsize) + cifs_sb->wsize = pvolume_info->wsize; + else + cifs_sb->wsize = min_t(const int, + PAGEVEC_SIZE * PAGE_CACHE_SIZE, + 127*1024); + /* old default of CIFSMaxBufSize was too small now + that SMB Write2 can send multiple pages in kvec. + RFC1001 does not describe what happens when frame + bigger than 128K is sent so use that as max in + conjunction with 52K kvec constraint on arch with 4K + page size */ + + if (cifs_sb->rsize < 2048) { + cifs_sb->rsize = 2048; + /* Windows ME may prefer this */ + cFYI(1, ("readsize set to minimum: 2048")); + } + /* calculate prepath */ + cifs_sb->prepath = pvolume_info->prepath; + if (cifs_sb->prepath) { + cifs_sb->prepathlen = strlen(cifs_sb->prepath); + /* we can not convert the / to \ in the path + separators in the prefixpath yet because we do not + know (until reset_cifs_unix_caps is called later) + whether POSIX PATH CAP is available. We normalize + the / to \ after reset_cifs_unix_caps is called */ + pvolume_info->prepath = NULL; + } else + cifs_sb->prepathlen = 0; + cifs_sb->mnt_uid = pvolume_info->linux_uid; + cifs_sb->mnt_gid = pvolume_info->linux_gid; + cifs_sb->mnt_file_mode = pvolume_info->file_mode; + cifs_sb->mnt_dir_mode = pvolume_info->dir_mode; + cFYI(1, ("file mode: 0x%x dir mode: 0x%x", + cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode)); + + if (pvolume_info->noperm) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_PERM; + if (pvolume_info->setuids) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SET_UID; + if (pvolume_info->server_ino) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SERVER_INUM; + if (pvolume_info->remap) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_MAP_SPECIAL_CHR; + if (pvolume_info->no_xattr) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_XATTR; + if (pvolume_info->sfu_emul) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_UNX_EMUL; + if (pvolume_info->nobrl) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_BRL; + if (pvolume_info->cifs_acl) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_ACL; + if (pvolume_info->override_uid) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID; + if (pvolume_info->override_gid) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_GID; + if (pvolume_info->dynperm) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DYNPERM; + if (pvolume_info->direct_io) { + cFYI(1, ("mounting share using direct i/o")); + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO; + } + + if ((pvolume_info->cifs_acl) && (pvolume_info->dynperm)) + cERROR(1, ("mount option dynperm ignored if cifsacl " + "mount option supported")); +} + int cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, char *mount_data, const char *devname) @@ -1996,9 +2082,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, goto out; } - if (srvTcp) { - cFYI(1, ("Existing tcp session with server found")); - } else { /* create socket */ + if (!srvTcp) { /* create socket */ if (volume_info.port) sin_server.sin_port = htons(volume_info.port); else @@ -2074,7 +2158,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, cFYI(1, ("Existing smb sess found (status=%d)", pSesInfo->status)); down(&pSesInfo->sesSem); - if (pSesInfo->status == CifsNeedReconnect) { + if (pSesInfo->need_reconnect) { cFYI(1, ("Session needs reconnect")); rc = cifs_setup_session(xid, pSesInfo, cifs_sb->local_nls); @@ -2124,146 +2208,59 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, /* search for existing tcon to this server share */ if (!rc) { - if (volume_info.rsize > CIFSMaxBufSize) { - cERROR(1, ("rsize %d too large, using MaxBufSize", - volume_info.rsize)); - cifs_sb->rsize = CIFSMaxBufSize; - } else if ((volume_info.rsize) && - (volume_info.rsize <= CIFSMaxBufSize)) - cifs_sb->rsize = volume_info.rsize; - else /* default */ - cifs_sb->rsize = CIFSMaxBufSize; - - if (volume_info.wsize > PAGEVEC_SIZE * PAGE_CACHE_SIZE) { - cERROR(1, ("wsize %d too large, using 4096 instead", - volume_info.wsize)); - cifs_sb->wsize = 4096; - } else if (volume_info.wsize) - cifs_sb->wsize = volume_info.wsize; - else - cifs_sb->wsize = - min_t(const int, PAGEVEC_SIZE * PAGE_CACHE_SIZE, - 127*1024); - /* old default of CIFSMaxBufSize was too small now - that SMB Write2 can send multiple pages in kvec. - RFC1001 does not describe what happens when frame - bigger than 128K is sent so use that as max in - conjunction with 52K kvec constraint on arch with 4K - page size */ - - if (cifs_sb->rsize < 2048) { - cifs_sb->rsize = 2048; - /* Windows ME may prefer this */ - cFYI(1, ("readsize set to minimum: 2048")); - } - /* calculate prepath */ - cifs_sb->prepath = volume_info.prepath; - if (cifs_sb->prepath) { - cifs_sb->prepathlen = strlen(cifs_sb->prepath); - /* we can not convert the / to \ in the path - separators in the prefixpath yet because we do not - know (until reset_cifs_unix_caps is called later) - whether POSIX PATH CAP is available. We normalize - the / to \ after reset_cifs_unix_caps is called */ - volume_info.prepath = NULL; - } else - cifs_sb->prepathlen = 0; - cifs_sb->mnt_uid = volume_info.linux_uid; - cifs_sb->mnt_gid = volume_info.linux_gid; - cifs_sb->mnt_file_mode = volume_info.file_mode; - cifs_sb->mnt_dir_mode = volume_info.dir_mode; - cFYI(1, ("file mode: 0x%x dir mode: 0x%x", - cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode)); - - if (volume_info.noperm) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_PERM; - if (volume_info.setuids) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SET_UID; - if (volume_info.server_ino) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_SERVER_INUM; - if (volume_info.remap) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_MAP_SPECIAL_CHR; - if (volume_info.no_xattr) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_XATTR; - if (volume_info.sfu_emul) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_UNX_EMUL; - if (volume_info.nobrl) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_BRL; - if (volume_info.cifs_acl) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_ACL; - if (volume_info.override_uid) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID; - if (volume_info.override_gid) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_GID; - if (volume_info.dynperm) - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DYNPERM; - if (volume_info.direct_io) { - cFYI(1, ("mounting share using direct i/o")); - cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO; - } - - if ((volume_info.cifs_acl) && (volume_info.dynperm)) - cERROR(1, ("mount option dynperm ignored if cifsacl " - "mount option supported")); + setup_cifs_sb(&volume_info, cifs_sb); tcon = find_unc(sin_server.sin_addr.s_addr, volume_info.UNC, volume_info.username); if (tcon) { cFYI(1, ("Found match on UNC path")); - /* we can have only one retry value for a connection - to a share so for resources mounted more than once - to the same server share the last value passed in - for the retry flag is used */ - tcon->retry = volume_info.retry; - tcon->nocase = volume_info.nocase; - tcon->local_lease = volume_info.local_lease; if (tcon->seal != volume_info.seal) cERROR(1, ("transport encryption setting " "conflicts with existing tid")); } else { tcon = tconInfoAlloc(); - if (tcon == NULL) + if (tcon == NULL) { rc = -ENOMEM; - else { - /* check for null share name ie connecting to - * dfs root */ - - /* BB check if this works for exactly length - * three strings */ - if ((strchr(volume_info.UNC + 3, '\\') == NULL) - && (strchr(volume_info.UNC + 3, '/') == - NULL)) { -/* rc = connect_to_dfs_path(xid, pSesInfo, - "", cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR);*/ - cFYI(1, ("DFS root not supported")); - rc = -ENODEV; - goto out; - } else { - /* BB Do we need to wrap sesSem around - * this TCon call and Unix SetFS as - * we do on SessSetup and reconnect? */ - rc = CIFSTCon(xid, pSesInfo, - volume_info.UNC, - tcon, cifs_sb->local_nls); - cFYI(1, ("CIFS Tcon rc = %d", rc)); - if (volume_info.nodfs) { - tcon->Flags &= - ~SMB_SHARE_IS_IN_DFS; - cFYI(1, ("DFS disabled (%d)", - tcon->Flags)); - } - } - if (!rc) { - atomic_inc(&pSesInfo->inUse); - tcon->retry = volume_info.retry; - tcon->nocase = volume_info.nocase; - tcon->seal = volume_info.seal; + goto mount_fail_check; + } + + /* check for null share name ie connect to dfs root */ + + /* BB check if works for exactly length 3 strings */ + if ((strchr(volume_info.UNC + 3, '\\') == NULL) + && (strchr(volume_info.UNC + 3, '/') == NULL)) { + /* rc = connect_to_dfs_path(...) */ + cFYI(1, ("DFS root not supported")); + rc = -ENODEV; + goto mount_fail_check; + } else { + /* BB Do we need to wrap sesSem around + * this TCon call and Unix SetFS as + * we do on SessSetup and reconnect? */ + rc = CIFSTCon(xid, pSesInfo, volume_info.UNC, + tcon, cifs_sb->local_nls); + cFYI(1, ("CIFS Tcon rc = %d", rc)); + if (volume_info.nodfs) { + tcon->Flags &= ~SMB_SHARE_IS_IN_DFS; + cFYI(1, ("DFS disabled (%d)", + tcon->Flags)); } } + if (!rc) { + atomic_inc(&pSesInfo->inUse); + tcon->seal = volume_info.seal; + } else + goto mount_fail_check; } + + /* we can have only one retry value for a connection + to a share so for resources mounted more than once + to the same server share the last value passed in + for the retry flag is used */ + tcon->retry = volume_info.retry; + tcon->nocase = volume_info.nocase; + tcon->local_lease = volume_info.local_lease; } if (pSesInfo) { if (pSesInfo->capabilities & CAP_LARGE_FILES) { @@ -2276,6 +2273,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, sb->s_time_gran = 100; /* on error free sesinfo and tcon struct if needed */ +mount_fail_check: if (rc) { /* if session setup failed, use count is zero but we still need to free cifsd thread */ @@ -3518,6 +3516,7 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses, /* above now done in SendReceive */ if ((rc == 0) && (tcon != NULL)) { tcon->tidStatus = CifsGood; + tcon->need_reconnect = false; tcon->tid = smb_buffer_response->Tid; bcc_ptr = pByteArea(smb_buffer_response); length = strnlen(bcc_ptr, BCC(smb_buffer_response) - 2); @@ -3746,6 +3745,7 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo, cFYI(1, ("CIFS Session Established successfully")); spin_lock(&GlobalMid_Lock); pSesInfo->status = CifsGood; + pSesInfo->need_reconnect = false; spin_unlock(&GlobalMid_Lock); } diff --git a/fs/cifs/file.c b/fs/cifs/file.c index ead1a3bb025..1540adaa593 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -493,7 +493,7 @@ int cifs_close(struct inode *inode, struct file *file) if (pTcon) { /* no sense reconnecting to close a file that is already closed */ - if (pTcon->tidStatus != CifsNeedReconnect) { + if (!pTcon->need_reconnect) { timeout = 2; while ((atomic_read(&pSMBFile->wrtPending) != 0) && (timeout <= 2048)) { -- cgit v1.2.3-70-g09d2 From fb396016647ae9de5b3bd8c4ee4f7b9cc7148bd5 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 13 Nov 2008 20:04:07 +0000 Subject: [CIFS] remove unused list, add new cifs sock list to prepare for mount/umount fix Also adds two lines missing from the previous patch (for the need reconnect flag in the /proc/fs/cifs/DebugData handling) The new global_cifs_sock_list is added, and initialized in init_cifs but not used yet. Jeff Layton will be adding code in to use that and to remove the GlobalTcon and GlobalSMBSession lists. CC: Jeff Layton CC: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/cifs_debug.c | 4 ++-- fs/cifs/cifsfs.c | 6 +++--- fs/cifs/cifsglob.h | 23 ++++++++--------------- 3 files changed, 13 insertions(+), 20 deletions(-) diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 69a12aae91d..ba8723d9599 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -204,7 +204,7 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) else seq_printf(m, " type: %d ", dev_type); - if (tcon->tidStatus == CifsNeedReconnect) + if (tcon->need_reconnect) seq_puts(m, "\tDISCONNECTED "); } read_unlock(&GlobalSMBSeslock); @@ -311,7 +311,7 @@ static int cifs_stats_proc_show(struct seq_file *m, void *v) i++; tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); seq_printf(m, "\n%d) %s", i, tcon->treeName); - if (tcon->tidStatus == CifsNeedReconnect) + if (tcon->need_reconnect) seq_puts(m, "\tDISCONNECTED "); seq_printf(m, "\nSMBs: %d Oplock Breaks: %d", atomic_read(&tcon->num_smbs_sent), diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 903bbd6449d..af16a2406b1 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1059,9 +1059,9 @@ init_cifs(void) { int rc = 0; cifs_proc_init(); -/* INIT_LIST_HEAD(&GlobalServerList);*/ /* BB not implemented yet */ - INIT_LIST_HEAD(&GlobalSMBSessionList); - INIT_LIST_HEAD(&GlobalTreeConnectionList); + INIT_LIST_HEAD(&global_cifs_sock_list); + INIT_LIST_HEAD(&GlobalSMBSessionList); /* BB to be removed by jl */ + INIT_LIST_HEAD(&GlobalTreeConnectionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalOplock_Q); #ifdef CONFIG_CIFS_EXPERIMENTAL INIT_LIST_HEAD(&GlobalDnotifyReqList); diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index dc0aa140f1b..d6357dc1be7 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -592,22 +592,15 @@ require use of the stronger protocol */ #define GLOBAL_EXTERN extern #endif -/* - * The list of servers that did not respond with NT LM 0.12. - * This list helps improve performance and eliminate the messages indicating - * that we had a communications error talking to the server in this list. - */ -/* Feature not supported */ -/* GLOBAL_EXTERN struct servers_not_supported *NotSuppList; */ - -/* - * The following is a hash table of all the users we know about. - */ -GLOBAL_EXTERN struct smbUidInfo *GlobalUidList[UID_HASH]; -/* GLOBAL_EXTERN struct list_head GlobalServerList; BB not implemented yet */ -GLOBAL_EXTERN struct list_head GlobalSMBSessionList; -GLOBAL_EXTERN struct list_head GlobalTreeConnectionList; +/* the list of TCP_Server_Info structures, ie each of the sockets + * connecting our client to a distinct server (ip address), is + * chained together by global_cifs_sock_list. The list of all our SMB + * sessions (and from that the tree connections) can be found + * by iterating over global_cifs_sock_list */ +GLOBAL_EXTERN struct list_head global_cifs_sock_list; +GLOBAL_EXTERN struct list_head GlobalSMBSessionList; /* BB to be removed by jl*/ +GLOBAL_EXTERN struct list_head GlobalTreeConnectionList; /* BB to be removed */ GLOBAL_EXTERN rwlock_t GlobalSMBSeslock; /* protects list inserts on 3 above */ GLOBAL_EXTERN struct list_head GlobalOplock_Q; -- cgit v1.2.3-70-g09d2 From 6c5ab376b0b579cf58f9217dcd7a94d817f7a043 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 31 Oct 2008 10:09:57 -0700 Subject: USB: vstusb: fix compiler warning on x86-64 This fixes a reported compiler warning. Reported-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/vstusb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c index 8648470c81c..63dff9ba73c 100644 --- a/drivers/usb/misc/vstusb.c +++ b/drivers/usb/misc/vstusb.c @@ -620,7 +620,7 @@ static long vstusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) __func__); retval = -EFAULT; } else { - dev_dbg(&dev->dev, "%s: recv %d bytes from pipe %d\n", + dev_dbg(&dev->dev, "%s: recv %zd bytes from pipe %d\n", __func__, usb_data.count, usb_data.pipe); } -- cgit v1.2.3-70-g09d2 From 0047ca0a45c6a481abd467fb52d2a480ffc8c6b9 Mon Sep 17 00:00:00 2001 From: Paul Ready Date: Wed, 29 Oct 2008 14:25:50 -0700 Subject: USB: add Nikon D300 camera to unusual_devs Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11685 When A Nikon D300 camera is connected to a system it is seen in /proc/bus/pci/devices but is not accessible. This is seen in the above file: T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=03 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04b0 ProdID=041a Rev= 1.03 S: Manufacturer=NIKON S: Product=NIKON DSC D300 S: SerialNumber=000008014379 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=usbfs E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Cc: Alan Stern Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index fb9e20e624c..f379291d538 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -418,6 +418,13 @@ UNUSUAL_DEV( 0x04b0, 0x0417, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by paul ready */ +UNUSUAL_DEV( 0x04b0, 0x0419, 0x0100, 0x0200, + "NIKON", + "NIKON DSC D300", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Reported by Doug Maxey (dwm@austin.ibm.com) */ UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110, "IBM", -- cgit v1.2.3-70-g09d2 From 352d026338378b1f13f044e33c1047da6e470056 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 29 Oct 2008 15:16:58 -0400 Subject: USB: don't register endpoints for interfaces that are going away This patch (as1155) fixes a bug in usbcore. When interfaces are deleted, either because the device was disconnected or because of a configuration change, the extra attribute files and child endpoint devices may get left behind. This is because the core removes them before calling device_del(). But during device_del(), after the driver is unbound the core will reinstall altsetting 0 and recreate those extra attributes and children. The patch prevents this by adding a flag to record when the interface is in the midst of being unregistered. When the flag is set, the attribute files and child devices will not be created. Signed-off-by: Alan Stern Cc: stable [2.6.27, 2.6.26, 2.6.25] Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 1 + drivers/usb/core/sysfs.c | 2 +- include/linux/usb.h | 2 ++ 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 887738577b2..6d1048faf08 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1091,6 +1091,7 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) continue; dev_dbg(&dev->dev, "unregistering interface %s\n", dev_name(&interface->dev)); + interface->unregistering = 1; usb_remove_sysfs_intf_files(interface); device_del(&interface->dev); } diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index f66fba11fbd..4fb65fdc9dc 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -840,7 +840,7 @@ int usb_create_sysfs_intf_files(struct usb_interface *intf) struct usb_host_interface *alt = intf->cur_altsetting; int retval; - if (intf->sysfs_files_created) + if (intf->sysfs_files_created || intf->unregistering) return 0; /* The interface string may be present in some altsettings diff --git a/include/linux/usb.h b/include/linux/usb.h index 8fa973bede5..f72aa51f7bc 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -108,6 +108,7 @@ enum usb_interface_condition { * (in probe()), bound to a driver, or unbinding (in disconnect()) * @is_active: flag set when the interface is bound and not suspended. * @sysfs_files_created: sysfs attributes exist + * @unregistering: flag set when the interface is being unregistered * @needs_remote_wakeup: flag set when the driver requires remote-wakeup * capability during autosuspend. * @needs_altsetting0: flag set when a set-interface request for altsetting 0 @@ -163,6 +164,7 @@ struct usb_interface { enum usb_interface_condition condition; /* state of binding */ unsigned is_active:1; /* the interface is not suspended */ unsigned sysfs_files_created:1; /* the sysfs attributes exist */ + unsigned unregistering:1; /* unregistration is in progress */ unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */ unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */ unsigned needs_binding:1; /* needs delayed unbind/rebind */ -- cgit v1.2.3-70-g09d2 From f82a689faeb328ba7c194782f42cc438519d508e Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Wed, 29 Oct 2008 15:10:31 +0200 Subject: usb: musb: Fix for isochronous IN transfer Fixes blurred capture images in dma mode. Isochronous error field in urb and source data buffer pointer were not updated properly in dma mode. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 77 ++++++++++++++++++++++++++++++++------------ 1 file changed, 57 insertions(+), 20 deletions(-) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 3133990f04e..981d49738ec 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1507,10 +1507,29 @@ void musb_host_rx(struct musb *musb, u8 epnum) musb_writew(hw_ep->regs, MUSB_RXCSR, val); #ifdef CONFIG_USB_INVENTRA_DMA + if (usb_pipeisoc(pipe)) { + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + d->actual_length = xfer_len; + + /* even if there was an error, we did the dma + * for iso_frame_desc->length + */ + if (d->status != EILSEQ && d->status != -EOVERFLOW) + d->status = 0; + + if (++qh->iso_idx >= urb->number_of_packets) + done = true; + else + done = false; + + } else { /* done if urb buffer is full or short packet is recd */ done = (urb->actual_length + xfer_len >= urb->transfer_buffer_length || dma->actual_len < qh->maxpacket); + } /* send IN token for next packet, without AUTOREQ */ if (!done) { @@ -1547,7 +1566,8 @@ void musb_host_rx(struct musb *musb, u8 epnum) if (dma) { struct dma_controller *c; u16 rx_count; - int ret; + int ret, length; + dma_addr_t buf; rx_count = musb_readw(epio, MUSB_RXCOUNT); @@ -1560,6 +1580,35 @@ void musb_host_rx(struct musb *musb, u8 epnum) c = musb->dma_controller; + if (usb_pipeisoc(pipe)) { + int status = 0; + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + + if (iso_err) { + status = -EILSEQ; + urb->error_count++; + } + if (rx_count > d->length) { + if (status == 0) { + status = -EOVERFLOW; + urb->error_count++; + } + DBG(2, "** OVERFLOW %d into %d\n",\ + rx_count, d->length); + + length = d->length; + } else + length = rx_count; + d->status = status; + buf = urb->transfer_dma + d->offset; + } else { + length = rx_count; + buf = urb->transfer_dma + + urb->actual_length; + } + dma->desired_mode = 0; #ifdef USE_MODE1 /* because of the issue below, mode 1 will @@ -1571,6 +1620,12 @@ void musb_host_rx(struct musb *musb, u8 epnum) urb->actual_length) > qh->maxpacket) dma->desired_mode = 1; + if (rx_count < hw_ep->max_packet_sz_rx) { + length = rx_count; + dma->bDesiredMode = 0; + } else { + length = urb->transfer_buffer_length; + } #endif /* Disadvantage of using mode 1: @@ -1608,12 +1663,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) */ ret = c->channel_program( dma, qh->maxpacket, - dma->desired_mode, - urb->transfer_dma - + urb->actual_length, - (dma->desired_mode == 0) - ? rx_count - : urb->transfer_buffer_length); + dma->desired_mode, buf, length); if (!ret) { c->channel_release(dma); @@ -1631,19 +1681,6 @@ void musb_host_rx(struct musb *musb, u8 epnum) } } - if (dma && usb_pipeisoc(pipe)) { - struct usb_iso_packet_descriptor *d; - int iso_stat = status; - - d = urb->iso_frame_desc + qh->iso_idx; - d->actual_length += xfer_len; - if (iso_err) { - iso_stat = -EILSEQ; - urb->error_count++; - } - d->status = iso_stat; - } - finish: urb->actual_length += xfer_len; qh->offset += xfer_len; -- cgit v1.2.3-70-g09d2 From 14a2c96f72e0939cb817b6624346b0161b5603db Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 29 Oct 2008 15:10:36 +0200 Subject: usb: musb: tusb6010: kill compile warning Add an errno to failing case. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/tusb6010.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index b73b036f3d7..ee8fca92a4a 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -605,7 +605,7 @@ void musb_platform_set_mode(struct musb *musb, u8 musb_mode) if (musb->board_mode != MUSB_OTG) { ERR("Changing mode currently only supported in OTG mode\n"); - return; + return -EINVAL; } otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT); -- cgit v1.2.3-70-g09d2 From eef767b761bdd08200fbbfc910ab815d03787326 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Wed, 29 Oct 2008 15:10:38 +0200 Subject: usb: musb: Removes compilation warning in gadget mode Fixes compilation warning when musb is configured in gadget mode. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/omap2430.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 9d2dcb121c5..ce6c162920f 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -53,7 +53,9 @@ static void musb_do_idle(unsigned long _musb) { struct musb *musb = (void *)_musb; unsigned long flags; +#ifdef CONFIG_USB_MUSB_HDRC_HCD u8 power; +#endif u8 devctl; devctl = musb_readb(musb->mregs, MUSB_DEVCTL); -- cgit v1.2.3-70-g09d2 From b60c72abdbd44ed2a63fa80455d0b7f18ce76d2b Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 29 Oct 2008 15:10:39 +0200 Subject: usb: musb: fix debug global variable name In order to avoid namespace conflicts, add a prefix to our kernel-wise symbol. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 6 +++--- drivers/usb/musb/musb_debug.h | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 4a35745b30b..5280dba9b1f 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -114,8 +114,8 @@ -unsigned debug; -module_param(debug, uint, S_IRUGO | S_IWUSR); +unsigned musb_debug; +module_param(musb_debug, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug message level. Default = 0"); #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia" @@ -2248,7 +2248,7 @@ static int __init musb_init(void) "host" #endif ", debug=%d\n", - musb_driver_name, debug); + musb_driver_name, musb_debug); return platform_driver_probe(&musb_driver, musb_probe); } diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h index 4d2794441b1..9fc1db44c72 100644 --- a/drivers/usb/musb/musb_debug.h +++ b/drivers/usb/musb/musb_debug.h @@ -48,11 +48,11 @@ __func__, __LINE__ , ## args); \ } } while (0) -extern unsigned debug; +extern unsigned musb_debug; static inline int _dbg_level(unsigned l) { - return debug >= l; + return musb_debug >= l; } #define DBG(level, fmt, args...) xprintk(level, KERN_DEBUG, fmt, ## args) -- cgit v1.2.3-70-g09d2 From 23d15e070c2fe5d341ca04275f6ea1b5a5fcb26f Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Wed, 29 Oct 2008 15:10:35 +0200 Subject: usb: musb: fix BULK request on different available endpoints Fixes co-working issue of usb serial device with usb/net devices while oter endpoints are free and can be used.This patch implements the policy that if endpoint resources are available then different BULK request goes to different endpoint otherwise they are multiplexed to one reserved endpoint as currently done. Switch statement case is reordered in musb_giveback() to take care of bulk request both in multiplex scenario and otherwise. NAK limit scheme has to be added for multiplexed BULK request scenario to avoid endpoint starvation due to usb/net devices. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 82 ++++++++++++++++++++++++-------------------- drivers/usb/musb/musb_host.h | 1 + 2 files changed, 46 insertions(+), 37 deletions(-) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 981d49738ec..e45e70bcc5e 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -378,6 +378,19 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) switch (qh->type) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + /* fifo policy for these lists, except that NAKing + * should rotate a qh to the end (for fairness). + */ + if (qh->mux == 1) { + head = qh->ring.prev; + list_del(&qh->ring); + kfree(qh); + qh = first_qh(head); + break; + } + case USB_ENDPOINT_XFER_ISOC: case USB_ENDPOINT_XFER_INT: /* this is where periodic bandwidth should be @@ -388,17 +401,6 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) kfree(qh); qh = NULL; break; - - case USB_ENDPOINT_XFER_CONTROL: - case USB_ENDPOINT_XFER_BULK: - /* fifo policy for these lists, except that NAKing - * should rotate a qh to the end (for fairness). - */ - head = qh->ring.prev; - list_del(&qh->ring); - kfree(qh); - qh = first_qh(head); - break; } } return qh; @@ -1708,22 +1710,9 @@ static int musb_schedule( struct list_head *head = NULL; /* use fixed hardware for control and bulk */ - switch (qh->type) { - case USB_ENDPOINT_XFER_CONTROL: + if (qh->type == USB_ENDPOINT_XFER_CONTROL) { head = &musb->control; hw_ep = musb->control_ep; - break; - case USB_ENDPOINT_XFER_BULK: - hw_ep = musb->bulk_ep; - if (is_in) - head = &musb->in_bulk; - else - head = &musb->out_bulk; - break; - } - if (head) { - idle = list_empty(head); - list_add_tail(&qh->ring, head); goto success; } @@ -1762,19 +1751,34 @@ static int musb_schedule( else diff = hw_ep->max_packet_sz_tx - qh->maxpacket; - if (diff > 0 && best_diff > diff) { + if (diff >= 0 && best_diff > diff) { best_diff = diff; best_end = epnum; } } - if (best_end < 0) + /* use bulk reserved ep1 if no other ep is free */ + if (best_end > 0 && qh->type == USB_ENDPOINT_XFER_BULK) { + hw_ep = musb->bulk_ep; + if (is_in) + head = &musb->in_bulk; + else + head = &musb->out_bulk; + goto success; + } else if (best_end < 0) { return -ENOSPC; + } idle = 1; + qh->mux = 0; hw_ep = musb->endpoints + best_end; musb->periodic[best_end] = qh; DBG(4, "qh %p periodic slot %d\n", qh, best_end); success: + if (head) { + idle = list_empty(head); + list_add_tail(&qh->ring, head); + qh->mux = 1; + } qh->hw_ep = hw_ep; qh->hep->hcpriv = qh; if (idle) @@ -2052,11 +2056,13 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) sched = &musb->control; break; case USB_ENDPOINT_XFER_BULK: - if (usb_pipein(urb->pipe)) - sched = &musb->in_bulk; - else - sched = &musb->out_bulk; - break; + if (qh->mux == 1) { + if (usb_pipein(urb->pipe)) + sched = &musb->in_bulk; + else + sched = &musb->out_bulk; + break; + } default: /* REVISIT when we get a schedule tree, periodic * transfers won't always be at the head of a @@ -2104,11 +2110,13 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) sched = &musb->control; break; case USB_ENDPOINT_XFER_BULK: - if (is_in) - sched = &musb->in_bulk; - else - sched = &musb->out_bulk; - break; + if (qh->mux == 1) { + if (is_in) + sched = &musb->in_bulk; + else + sched = &musb->out_bulk; + break; + } default: /* REVISIT when we get a schedule tree, periodic transfers * won't always be at the head of a singleton queue... diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h index 77bcdb9d5b3..0b7fbcd2196 100644 --- a/drivers/usb/musb/musb_host.h +++ b/drivers/usb/musb/musb_host.h @@ -53,6 +53,7 @@ struct musb_qh { struct list_head ring; /* of musb_qh */ /* struct musb_qh *next; */ /* for periodic tree */ + u8 mux; /* qh multiplexed to hw_ep */ unsigned offset; /* in urb->transfer_buffer */ unsigned segsize; /* current xfer fragment */ -- cgit v1.2.3-70-g09d2 From c6206faa4f18bcc837a12552b8c184ab1668fdea Mon Sep 17 00:00:00 2001 From: Leslie Watter Date: Wed, 12 Nov 2008 15:10:07 -0200 Subject: USB: Add YISO u893 usb modem vendor and product IDs to option driver This patch adds YISO u893 usb modem vendor and product ID to option.c. I had a better experience using this modification and the same system. Signed-off-by: Leslie Harlley Watter Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index bd07eaa300b..6fa1ec441b6 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -160,6 +160,11 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define NOVATELWIRELESS_VENDOR_ID 0x1410 +/* YISO PRODUCTS */ + +#define YISO_VENDOR_ID 0x0EAB +#define YISO_PRODUCT_U893 0xC893 + /* MERLIN EVDO PRODUCTS */ #define NOVATELWIRELESS_PRODUCT_V640 0x1100 #define NOVATELWIRELESS_PRODUCT_V620 0x1110 @@ -408,6 +413,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) }, + { USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004) }, -- cgit v1.2.3-70-g09d2 From 2870fde780bbdf6442e9efe7ca5fc11bcdd2a09a Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Sun, 9 Nov 2008 11:40:30 +0530 Subject: USB: mention URB_FREE_BUFFER in usb_free_urb documentation The usb_free_urb comment says that the transfer buffer will not be freed, but this is not the case when URB_FREE_BUFFER is set. Signed-off-by: Rabin Vincent Acked-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/urb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 4342bd9c3bb..1f68af9db3f 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -85,8 +85,8 @@ EXPORT_SYMBOL_GPL(usb_alloc_urb); * Must be called when a user of a urb is finished with it. When the last user * of the urb calls this function, the memory of the urb is freed. * - * Note: The transfer buffer associated with the urb is not freed, that must be - * done elsewhere. + * Note: The transfer buffer associated with the urb is not freed unless the + * URB_FREE_BUFFER transfer flag is set. */ void usb_free_urb(struct urb *urb) { -- cgit v1.2.3-70-g09d2 From 881e3c9867c585e632dfa4ccb0848b62debc64c7 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Sun, 9 Nov 2008 20:17:54 +0000 Subject: USB: CP2101 Add device ID for AMB2560 This patch adds the device vendor and product IDs for Amber Wireless AMB2560 Signed-off-by: Craig Shelley Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 8008d0bc80a..f073b589774 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -85,6 +85,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ + { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ -- cgit v1.2.3-70-g09d2 From ad0b65efd12d020b046cde8d6f474e37bb98dd73 Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Thu, 6 Nov 2008 11:19:11 -0800 Subject: USB: cdc-acm.c: fix recursive lock in acm_start_wb error path Fixes an obvious bug in cdc-acm by avoiding a recursive lock on acm_start_wb()'s error path. Should apply towards 2.6.27 stable and 2.6.28. ============================================= [ INFO: possible recursive locking detected ] 2.6.27-2-pae #109 --------------------------------------------- python/31449 is trying to acquire lock: (&acm->write_lock){++..}, at: [] acm_start_wb+0x5c/0x7b [cdc_acm] but task is already holding lock: (&acm->write_lock){++..}, at: [] acm_tty_write+0xe1/0x167 [cdc_acm] other info that might help us debug this: 2 locks held by python/31449: #0: (&tty->atomic_write_lock){--..}, at: [] tty_write_lock+0x14/0x3b #1: (&acm->write_lock){++..}, at: [] acm_tty_write+0xe1/0x167 [cdc_acm] stack backtrace: Pid: 31449, comm: python Not tainted 2.6.27-2-pae #109 [] ? printk+0xf/0x18 [] __lock_acquire+0xc7b/0x1316 [] lock_acquire+0x70/0x97 [] ? acm_start_wb+0x5c/0x7b [cdc_acm] [] _spin_lock_irqsave+0x37/0x47 [] ? acm_start_wb+0x5c/0x7b [cdc_acm] [] acm_start_wb+0x5c/0x7b [cdc_acm] [] acm_tty_write+0x143/0x167 [cdc_acm] [] write_chan+0x1cd/0x297 [] ? default_wake_function+0x0/0xd [] tty_write+0x149/0x1b9 [] ? write_chan+0x0/0x297 [] ? rw_verify_area+0x76/0x98 [] ? tty_write+0x0/0x1b9 [] vfs_write+0x8c/0x136 [] sys_write+0x3b/0x60 [] sysenter_do_call+0x12/0x3f ======================= Signed-off-by: Brandon Philips Cc: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 20104443081..d50a99f70ae 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -158,16 +158,12 @@ static int acm_wb_is_avail(struct acm *acm) } /* - * Finish write. + * Finish write. Caller must hold acm->write_lock */ static void acm_write_done(struct acm *acm, struct acm_wb *wb) { - unsigned long flags; - - spin_lock_irqsave(&acm->write_lock, flags); wb->use = 0; acm->transmitting--; - spin_unlock_irqrestore(&acm->write_lock, flags); } /* @@ -482,6 +478,7 @@ static void acm_write_bulk(struct urb *urb) { struct acm_wb *wb = urb->context; struct acm *acm = wb->instance; + unsigned long flags; if (verbose || urb->status || (urb->actual_length != urb->transfer_buffer_length)) @@ -490,7 +487,9 @@ static void acm_write_bulk(struct urb *urb) urb->transfer_buffer_length, urb->status); + spin_lock_irqsave(&acm->write_lock, flags); acm_write_done(acm, wb); + spin_unlock_irqrestore(&acm->write_lock, flags); if (ACM_READY(acm)) schedule_work(&acm->work); else -- cgit v1.2.3-70-g09d2 From 8010e06cc90367b4d3fba3b0ec3ced32360ac890 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 4 Nov 2008 11:33:35 -0500 Subject: USB: unusual_devs entry for Argosy USB mass-storage interface This patch (as1162) adds an unusual_devs entry for Argosy's USB-IDE interface. This fixes Bugzilla #11843. Signed-off-by: Alan Stern Tested-by: Luciano Rocha Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index f379291d538..b2ec1520852 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1265,6 +1265,13 @@ UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY), +/* Reported by Luciano Rocha */ +UNUSUAL_DEV( 0x0840, 0x0082, 0x0001, 0x0001, + "Argosy", + "Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Entry and supporting patch by Theodore Kilgore . * Flag will support Bulk devices which use a standards-violating 32-byte * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with -- cgit v1.2.3-70-g09d2 From ddcb01ff9bf49c4dbbb058423559f7bc90b89374 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 31 Oct 2008 13:52:54 -0700 Subject: USB: Fix PS3 USB shutdown problems Add ehci_shutdown() or ohci_shutdown() calls to the USB PS3 bus glue. ehci_shutdown() and ohci_shutdown() do some controller specific cleanups not done by usb_remove_hcd(). Fixes errors on shutdown or reboot similar to these: ps3-ehci-driver sb_07: HC died; cleaning up irq 51: nobody cared (try booting with the "irqpoll" option) Related bugzilla reports: http://bugzilla.kernel.org/show_bug.cgi?id=11819 http://bugzilla.terrasoftsolutions.com/show_bug.cgi?id=317 Signed-off-by: Geoff Levand Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-ps3.c | 1 + drivers/usb/host/ohci-ps3.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index 0eba894bcb0..9c9da35abc6 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -205,6 +205,7 @@ static int ps3_ehci_remove(struct ps3_system_bus_device *dev) tmp = hcd->irq; + ehci_shutdown(hcd); usb_remove_hcd(hcd); ps3_system_bus_set_driver_data(dev, NULL); diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c index 2089d8a46c4..3c1a3b5f89f 100644 --- a/drivers/usb/host/ohci-ps3.c +++ b/drivers/usb/host/ohci-ps3.c @@ -192,7 +192,7 @@ fail_start: return result; } -static int ps3_ohci_remove (struct ps3_system_bus_device *dev) +static int ps3_ohci_remove(struct ps3_system_bus_device *dev) { unsigned int tmp; struct usb_hcd *hcd = @@ -205,6 +205,7 @@ static int ps3_ohci_remove (struct ps3_system_bus_device *dev) tmp = hcd->irq; + ohci_shutdown(hcd); usb_remove_hcd(hcd); ps3_system_bus_set_driver_data(dev, NULL); -- cgit v1.2.3-70-g09d2 From 659d643462fba8187f90f7604a9e0be144e242bc Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Thu, 30 Oct 2008 08:42:43 -0700 Subject: USB: storage: adjust comment in Kconfig Since commit 65934a9 ("Make USB storage depend on SCSI rather than selecting it [try #6]") the comment at the top of drivers/usb/storage/Kconfig is incorrect. Adjust it to the current situation. Signed-off-by: Paul Bolle Signed-off-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 3d9249632ae..c68b738900b 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -2,8 +2,8 @@ # USB Storage driver configuration # -comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'" -comment "may also be needed; see USB_STORAGE Help for more information" +comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;" +comment "see USB_STORAGE Help for more information" depends on USB config USB_STORAGE -- cgit v1.2.3-70-g09d2 From 9a18e75fc443d24d25ee0fcf892a64a9741f6294 Mon Sep 17 00:00:00 2001 From: Damir N Abdullin Date: Thu, 30 Oct 2008 13:52:38 -0700 Subject: + usb-serial-cp2101-add-enfora-gsm2228.patch added to -mm tree Enfora GSM2228 based on Cygnal Integrated Products chip uses the same cp2101 driver. Signed-off-by: Damir N Abdullin Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index f073b589774..9035d7256b0 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -67,6 +67,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */ { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ + { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */ { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */ { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ -- cgit v1.2.3-70-g09d2 From ff30bf1ca4b548c0928dae6bfce89458b95e5bf4 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sun, 2 Nov 2008 15:25:42 +0100 Subject: USB: remove optional bus bindings in isp1760, fixing runtime warning Roland Reported the following: | kmem_cache_create: duplicate cache isp1760_qtd | Pid: 461, comm: modprobe Tainted: G W 2.6.28-rc2-git3-default #4 | Call Trace: | [] kmem_cache_create+0xc9/0x3a3 | [] free_pages_bulk+0x16c/0x1c9 | [] isp1760_init+0x0/0xb [isp1760] | [] init_kmem_once+0x18/0x5f [isp1760] | [] isp1760_init+0x5/0xb [isp1760] | [] _stext+0x4d/0x148 | [] load_module+0x12cd/0x142e | [] kmem_cache_destroy+0x0/0xd7 | [] sys_init_module+0x87/0x176 | [] sysenter_do_call+0x12/0x2f The reason, is that ret is initialized with ENODEV instead of 0 _or_ the kmem cache is not freed in error case with no bus binding. The difference between OF+PCI and OF only is | 15148 804 32 15984 3e70 isp1760-of-pci.o | 13748 676 8 14432 3860 isp1760-of.o about 1.5 KiB. Until there is a checkbox where the user *must* select atleast one item, and may select multiple entries I don't make it selectable anymore. Having a driver which can't be used under any circumstances is broken anyway and I've seen distros shipping it that way. Reported-by: Roland Kletzing Signed-off-by: Sebastian Andrzej Siewior a Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 23 ++++++----------------- drivers/usb/host/isp1760-if.c | 22 +++++++++++----------- 2 files changed, 17 insertions(+), 28 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 56f592dc0b3..f3a75a929e0 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -110,29 +110,18 @@ config USB_ISP116X_HCD config USB_ISP1760_HCD tristate "ISP 1760 HCD support" - depends on USB && EXPERIMENTAL + depends on USB && EXPERIMENTAL && (PCI || PPC_OF) ---help--- The ISP1760 chip is a USB 2.0 host controller. This driver does not support isochronous transfers or OTG. + This USB controller is usually attached to a non-DMA-Master + capable bus. NXP's eval kit brings this chip on PCI card + where the chip itself is behind a PLB to simulate such + a bus. To compile this driver as a module, choose M here: the - module will be called isp1760-hcd. - -config USB_ISP1760_PCI - bool "Support for the PCI bus" - depends on USB_ISP1760_HCD && PCI - ---help--- - Enables support for the device present on the PCI bus. - This should only be required if you happen to have the eval kit from - NXP and you are going to test it. - -config USB_ISP1760_OF - bool "Support for the OF platform bus" - depends on USB_ISP1760_HCD && PPC_OF - ---help--- - Enables support for the device present on the PowerPC - OpenFirmware platform bus. + module will be called isp1760. config USB_OHCI_HCD tristate "OHCI HCD support" diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index af849f59613..b87ca7cf4b3 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -14,16 +14,16 @@ #include "../core/hcd.h" #include "isp1760-hcd.h" -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF #include #include #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI #include #endif -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF static int of_isp1760_probe(struct of_device *dev, const struct of_device_id *match) { @@ -128,7 +128,7 @@ static struct of_platform_driver isp1760_of_driver = { }; #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI static u32 nxp_pci_io_base; static u32 iolength; static u32 pci_mem_phy0; @@ -288,28 +288,28 @@ static struct pci_driver isp1761_pci_driver = { static int __init isp1760_init(void) { - int ret = -ENODEV; + int ret; init_kmem_once(); -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF ret = of_register_platform_driver(&isp1760_of_driver); if (ret) { deinit_kmem_cache(); return ret; } #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI ret = pci_register_driver(&isp1761_pci_driver); if (ret) goto unreg_of; #endif return ret; -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI unreg_of: #endif -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF of_unregister_platform_driver(&isp1760_of_driver); #endif deinit_kmem_cache(); @@ -319,10 +319,10 @@ module_init(isp1760_init); static void __exit isp1760_exit(void) { -#ifdef CONFIG_USB_ISP1760_OF +#ifdef CONFIG_PPC_OF of_unregister_platform_driver(&isp1760_of_driver); #endif -#ifdef CONFIG_USB_ISP1760_PCI +#ifdef CONFIG_PCI pci_unregister_driver(&isp1761_pci_driver); #endif deinit_kmem_cache(); -- cgit v1.2.3-70-g09d2 From ed4103b3fcf38985995e732dab6c3e2b9693f6cb Mon Sep 17 00:00:00 2001 From: Ricky Wong Date: Tue, 4 Nov 2008 19:13:45 +0800 Subject: usb: unusual devs patch for Nokia 7610 Supernova Additional sectors were reported by the Nokia 7610 Supernova phone in usb storage mode. The following patch rectifies the aforementioned problem. Signed-off-by: Ricky Wong Yung Fei Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index b2ec1520852..d4e5fc86e43 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -253,6 +253,14 @@ UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Submitted by Ricky Wong Yung Fei */ +/* Nokia 7610 Supernova - Too many sectors reported in usb storage mode */ +UNUSUAL_DEV( 0x0421, 0x00f5, 0x0000, 0x0470, + "Nokia", + "7610 Supernova", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Olaf Hering from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", -- cgit v1.2.3-70-g09d2 From 859ff4072027ea7741121b902c59763f090e00c2 Mon Sep 17 00:00:00 2001 From: Albert Comerma Date: Tue, 4 Nov 2008 10:44:01 -0800 Subject: USB: SISUSB2VGA driver: add 0x0711, 0x0903 Signed-off-by: Albert Comerma Cc: Alan Cox Cc: David Brownell Cc: Mauro Carvalho Chehab Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/sisusbvga/sisusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 69c34a58e20..b4ec716de7d 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3270,6 +3270,7 @@ static struct usb_device_id sisusb_table [] = { { USB_DEVICE(0x0711, 0x0900) }, { USB_DEVICE(0x0711, 0x0901) }, { USB_DEVICE(0x0711, 0x0902) }, + { USB_DEVICE(0x0711, 0x0903) }, { USB_DEVICE(0x0711, 0x0918) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) }, -- cgit v1.2.3-70-g09d2 From d73b7aff28bc53c04e1f2e5ccaa5ea43089fb4a4 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Mon, 10 Nov 2008 21:11:11 -0700 Subject: ub: stub pre_reset and post_reset to fix oops Due to recent changes to usb_reset_device, the following hang occurs: events/0 D 0000000000000000 0 6 2 ffff880037477cc0 0000000000000046 ffff880037477c50 ffffffff80237434 ffffffff80574c80 00000001000a015c 0000000000000286 ffff8800374757d0 ffff88002a31c860 ffff880037475a00 0000000036779140 ffff880037475a00 Call Trace: [] try_to_del_timer_sync+0x52/0x5b [] dma_pool_free+0x1a7/0x1ec [] ub_disconnect+0x8e/0x1ad [ub] [] autoremove_wake_function+0x0/0x2e [] usb_unbind_interface+0x5c/0xb7 [] __device_release_driver+0x95/0xbd [] device_release_driver+0x21/0x2d [] usb_driver_release_interface+0x44/0x83 [] usb_forced_unbind_intf+0x17/0x1d [] usb_reset_device+0x7d/0x114 [] ub_reset_task+0x0/0x293 [ub] [] ub_reset_task+0x1c4/0x293 [ub] [] flush_to_ldisc+0x0/0x1cd [] ub_reset_task+0x0/0x293 [ub] [] run_workqueue+0x87/0x114 [] worker_thread+0xd8/0xe7 [] autoremove_wake_function+0x0/0x2e [] worker_thread+0x0/0xe7 [] kthread+0x47/0x73 [] schedule_tail+0x27/0x60 [] child_rip+0xa/0x11 [] kthread+0x0/0x73 [] child_rip+0x0/0x11 This is because usb_reset_device now unbinds, and that calls disconnect, which in case of ub waits until the reset completes... which deadlocks. Worse, this deadlocks keventd and this takes whole box down. I'm going to fix this properly later, but let's unbreak the driver quickly for non-composite devices at least. Signed-off-by: Pete Zaitcev Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/block/ub.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/block/ub.c b/drivers/block/ub.c index fccac18d311..048d71d244d 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -1546,8 +1546,6 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) /* * Reset management - * XXX Move usb_reset_device to khubd. Hogging kevent is not a good thing. - * XXX Make usb_sync_reset asynchronous. */ static void ub_reset_enter(struct ub_dev *sc, int try) @@ -1632,6 +1630,22 @@ static void ub_reset_task(struct work_struct *work) spin_unlock_irqrestore(sc->lock, flags); } +/* + * XXX Reset brackets are too much hassle to implement, so just stub them + * in order to prevent forced unbinding (which deadlocks solid when our + * ->disconnect method waits for the reset to complete and this kills keventd). + * + * XXX Tell Alan to move usb_unlock_device inside of usb_reset_device, + * or else the post_reset is invoked, and restats I/O on a locked device. + */ +static int ub_pre_reset(struct usb_interface *iface) { + return 0; +} + +static int ub_post_reset(struct usb_interface *iface) { + return 0; +} + /* * This is called from a process context. */ @@ -2446,6 +2460,8 @@ static struct usb_driver ub_driver = { .probe = ub_probe, .disconnect = ub_disconnect, .id_table = ub_usb_ids, + .pre_reset = ub_pre_reset, + .post_reset = ub_post_reset, }; static int __init ub_init(void) -- cgit v1.2.3-70-g09d2 From 5863964608489f6dbf4b5f3118b45b3750a8274d Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Tue, 11 Nov 2008 16:47:21 +0900 Subject: usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USB When I used SuperH on-chip USB, there was the problem that accessed r8a66597_root_hub which was not allocated. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/r8a66597-hcd.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index c18d8790c41..2376f24f3c8 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1763,11 +1763,12 @@ static void r8a66597_timer(unsigned long _r8a66597) { struct r8a66597 *r8a66597 = (struct r8a66597 *)_r8a66597; unsigned long flags; + int port; spin_lock_irqsave(&r8a66597->lock, flags); - r8a66597_root_hub_control(r8a66597, 0); - r8a66597_root_hub_control(r8a66597, 1); + for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) + r8a66597_root_hub_control(r8a66597, port); spin_unlock_irqrestore(&r8a66597->lock, flags); } -- cgit v1.2.3-70-g09d2 From 67b2e029743a52670d77864723b4d0d40f7733b5 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 12 Nov 2008 17:04:53 -0500 Subject: USB: EHCI: fix handling of dead controllers This patch (as1165) makes a few small changes in the logic used by ehci-hcd when it encounters a controller error: Instead of printing out the masked status, it prints the original status as read directly from the hardware. It doesn't check for the STS_HALT status bit before taking action. The mere fact that the STS_FATAL bit is set means that something bad has happened and the controller needs to be reset. With the old code this test could never succeed because the STS_HALT bit was masked out from the status. I anticipate that this will prevent the occasional "irq X: nobody cared" problem people encounter when their EHCI controllers die. Signed-off-by: Alan Stern Cc: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 15a803b206b..4725d15d096 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -643,7 +643,7 @@ static int ehci_run (struct usb_hcd *hcd) static irqreturn_t ehci_irq (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); - u32 status, pcd_status = 0, cmd; + u32 status, masked_status, pcd_status = 0, cmd; int bh; spin_lock (&ehci->lock); @@ -656,14 +656,14 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) goto dead; } - status &= INTR_MASK; - if (!status) { /* irq sharing? */ + masked_status = status & INTR_MASK; + if (!masked_status) { /* irq sharing? */ spin_unlock(&ehci->lock); return IRQ_NONE; } /* clear (just) interrupts */ - ehci_writel(ehci, status, &ehci->regs->status); + ehci_writel(ehci, masked_status, &ehci->regs->status); cmd = ehci_readl(ehci, &ehci->regs->command); bh = 0; @@ -734,18 +734,17 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* PCI errors [4.15.2.4] */ if (unlikely ((status & STS_FATAL) != 0)) { + ehci_err(ehci, "fatal error\n"); dbg_cmd(ehci, "fatal", cmd); dbg_status(ehci, "fatal", status); - if (status & STS_HALT) { - ehci_err (ehci, "fatal error\n"); + ehci_halt(ehci); dead: - ehci_reset (ehci); - ehci_writel(ehci, 0, &ehci->regs->configured_flag); - /* generic layer kills/unlinks all urbs, then - * uses ehci_stop to clean up the rest - */ - bh = 1; - } + ehci_reset(ehci); + ehci_writel(ehci, 0, &ehci->regs->configured_flag); + /* generic layer kills/unlinks all urbs, then + * uses ehci_stop to clean up the rest + */ + bh = 1; } if (bh) -- cgit v1.2.3-70-g09d2 From 372dd6e8ed924e876f3beb598721e813ad7fa323 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 12 Nov 2008 17:02:57 -0500 Subject: USB: EHCI: fix divide-by-zero bug This patch (as1164) fixes a bug in the EHCI scheduler. The interval value it uses is already in linear format, not logarithmically coded. The existing code can sometimes crash the system by trying to divide by zero. Signed-off-by: Alan Stern Cc: David Brownell Cc: Stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sched.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 4a0c5a78b2e..a081ee65bde 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -918,7 +918,7 @@ iso_stream_init ( */ stream->usecs = HS_USECS_ISO (maxp); bandwidth = stream->usecs * 8; - bandwidth /= 1 << (interval - 1); + bandwidth /= interval; } else { u32 addr; @@ -951,7 +951,7 @@ iso_stream_init ( } else stream->raw_mask = smask_out [hs_transfers - 1]; bandwidth = stream->usecs + stream->c_usecs; - bandwidth /= 1 << (interval + 2); + bandwidth /= interval << 3; /* stream->splits gets created from raw_mask later */ stream->address = cpu_to_hc32(ehci, addr); -- cgit v1.2.3-70-g09d2 From e50ae572b33646656fa7037541613834dcadedfb Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 12 Nov 2008 11:35:13 -0800 Subject: USB: gadget: cdc-acm deadlock fix This fixes a deadlock appearing with some USB peripheral drivers when running CDC ACM gadget code. The newish (2.6.27) CDC ACM event notification mechanism sends messages (IN to the host) which are short enough to fit in most FIFOs. That means that with some peripheral controller drivers (evidently not the ones used to verify the notification code!!) the completion callback can be issued before queue() returns. The deadlock would come because the completion callback and the event-issuing code shared a spinlock. Fix is trivial: drop that lock while queueing the message. Signed-off-by: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_acm.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c index 5ee1590b8e9..c1d34df0b15 100644 --- a/drivers/usb/gadget/f_acm.c +++ b/drivers/usb/gadget/f_acm.c @@ -463,7 +463,11 @@ static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value, notify->wLength = cpu_to_le16(length); memcpy(buf, data, length); + /* ep_queue() can complete immediately if it fills the fifo... */ + spin_unlock(&acm->lock); status = usb_ep_queue(ep, req, GFP_ATOMIC); + spin_lock(&acm->lock); + if (status < 0) { ERROR(acm->port.func.config->cdev, "acm ttyGS%d can't notify serial state, %d\n", -- cgit v1.2.3-70-g09d2 From ccf95402d0ae6f433f29ce88cfd589cec8fc81ad Mon Sep 17 00:00:00 2001 From: Jason Cooper Date: Tue, 11 Nov 2008 13:02:53 -0500 Subject: USB: net: asix: add support for Cables-to-Go USB Ethernet adapter Add support to drivers/net/usb/asix.c for the Cables-to-Go "USB 2.0 to 10/100 Ethernet Adapter". USB id 0b95:772a. Signed-off-by: Jason Cooper Signed-off-by: Greg Kroah-Hartman --- drivers/net/usb/asix.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 37ecf845edf..e12cdb4543b 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1444,6 +1444,10 @@ static const struct usb_device_id products [] = { // Apple USB Ethernet Adapter USB_DEVICE(0x05ac, 0x1402), .driver_info = (unsigned long) &ax88772_info, +}, { + // Cables-to-Go USB Ethernet Adapter + USB_DEVICE(0x0b95, 0x772a), + .driver_info = (unsigned long) &ax88772_info, }, { }, // END }; -- cgit v1.2.3-70-g09d2 From 18776c7316545482a02bfaa2629a2aa1afc48357 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 13 Nov 2008 23:38:52 +0000 Subject: dm raid1: flush workqueue before destruction We queue work on keventd queue --- so this queue must be flushed in the destructor. Otherwise, keventd could access mirror_set after it was freed. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon Cc: stable@kernel.org --- drivers/md/dm-raid1.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 9d7b53ed75b..ec43f9fa4b2 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1032,6 +1032,7 @@ static void mirror_dtr(struct dm_target *ti) del_timer_sync(&ms->timer); flush_workqueue(ms->kmirrord_wq); + flush_scheduled_work(); dm_kcopyd_client_destroy(ms->kcopyd_client); destroy_workqueue(ms->kmirrord_wq); free_context(ms, ti, ms->nr_mirrors); -- cgit v1.2.3-70-g09d2 From 6edebdee48729ab4ba564bbfcb8dbf6a6cd68a39 Mon Sep 17 00:00:00 2001 From: Heinz Mauelshagen Date: Thu, 13 Nov 2008 23:38:56 +0000 Subject: dm stripe: fix init failure Don't proceed if dm_stripe_init() fails to register itself as a dm target. Signed-off-by: Heinz Mauelshagen Signed-off-by: Alasdair G Kergon --- drivers/md/dm-stripe.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index a2d068dbe9e..9e4ef88d421 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -320,8 +320,10 @@ int __init dm_stripe_init(void) int r; r = dm_register_target(&stripe_target); - if (r < 0) + if (r < 0) { DMWARN("target registration failed"); + return r; + } kstriped = create_singlethread_workqueue("kstriped"); if (!kstriped) { -- cgit v1.2.3-70-g09d2 From b81aa1c79201cb424114fd198607951900babe18 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 13 Nov 2008 23:39:00 +0000 Subject: dm mpath: avoid attempting to activate null path Path activation code is called even when the pgpath is NULL. This could lead to a panic in activate_path(). Such a panic is seen in -rt kernel. This problem has been there before the pg_init() was moved to a workqueue. Signed-off-by: Chandra Seetharaman Signed-off-by: Alasdair G Kergon --- drivers/md/dm-mpath.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 4840733cd90..58b1015260f 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -441,13 +441,13 @@ static void process_queued_ios(struct work_struct *work) __choose_pgpath(m); pgpath = m->current_pgpath; - m->pgpath_to_activate = m->current_pgpath; if ((pgpath && !m->queue_io) || (!pgpath && !m->queue_if_no_path)) must_queue = 0; - if (m->pg_init_required && !m->pg_init_in_progress) { + if (m->pg_init_required && !m->pg_init_in_progress && pgpath) { + m->pgpath_to_activate = pgpath; m->pg_init_count++; m->pg_init_required = 0; m->pg_init_in_progress = 1; -- cgit v1.2.3-70-g09d2 From 14e98c5ca8bed825f65cbf11cb0ffd2c09dac2f4 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 13 Nov 2008 23:39:06 +0000 Subject: dm mpath: warn if args ignored Currently dm ignores the parameters provided to hardware handlers without providing any notifications to the user. This patch just prints a warning message so that the user knows that the arguments are ignored. Signed-off-by: Chandra Seetharaman Signed-off-by: Alasdair G Kergon --- drivers/md/dm-mpath.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 58b1015260f..3d7f4923cd1 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -708,6 +708,10 @@ static int parse_hw_handler(struct arg_set *as, struct multipath *m) m->hw_handler_name = NULL; return -EINVAL; } + + if (hw_argc > 1) + DMWARN("Ignoring user-specified arguments for " + "hardware handler \"%s\"", m->hw_handler_name); consume(as, hw_argc - 1); return 0; -- cgit v1.2.3-70-g09d2 From d221d2e77696e70e94b13989ea15db2ba5b34f8e Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 13 Nov 2008 23:39:10 +0000 Subject: dm: move pending queue wake_up end_io_acct This doesn't fix any bug, just moves wake_up immediately after decrementing md->pending, for better code readability. It must be clear to anyone manipulating md->pending to wake up the queue if md->pending reaches zero, so move the wakeup as close to the decrementing as possible. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 6963ad14840..dc25d8a07bc 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -375,7 +375,7 @@ static void start_io_acct(struct dm_io *io) dm_disk(md)->part0.in_flight = atomic_inc_return(&md->pending); } -static int end_io_acct(struct dm_io *io) +static void end_io_acct(struct dm_io *io) { struct mapped_device *md = io->md; struct bio *bio = io->bio; @@ -391,7 +391,9 @@ static int end_io_acct(struct dm_io *io) dm_disk(md)->part0.in_flight = pending = atomic_dec_return(&md->pending); - return !pending; + /* nudge anyone waiting on suspend queue */ + if (!pending) + wake_up(&md->wait); } /* @@ -499,9 +501,7 @@ static void dec_pending(struct dm_io *io, int error) spin_unlock_irqrestore(&io->md->pushback_lock, flags); } - if (end_io_acct(io)) - /* nudge anyone waiting on suspend queue */ - wake_up(&io->md->wait); + end_io_acct(io); if (io->error != DM_ENDIO_REQUEUE) { blk_add_trace_bio(io->md->queue, io->bio, -- cgit v1.2.3-70-g09d2 From 8a57dfc6f943c92b861c9a19b0c86ddcb2aba768 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Thu, 13 Nov 2008 23:39:14 +0000 Subject: dm: avoid destroying table in dm_any_congested dm_any_congested() just checks for the DMF_BLOCK_IO and has no code to make sure that suspend waits for dm_any_congested() to complete. This patch adds such a check. Without it, a race can occur with dm_table_put() attempting to destroying the table in the wrong thread, the one running dm_any_congested() which is meant to be quick and return immediately. Two examples of problems: 1. Sleeping functions called from congested code, the caller of which holds a spin lock. 2. An ABBA deadlock between pdflush and multipathd. The two locks in contention are inode lock and kernel lock. Signed-off-by: Chandra Seetharaman Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/md/dm.c b/drivers/md/dm.c index dc25d8a07bc..c99e4728ff4 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -937,16 +937,24 @@ static void dm_unplug_all(struct request_queue *q) static int dm_any_congested(void *congested_data, int bdi_bits) { - int r; - struct mapped_device *md = (struct mapped_device *) congested_data; - struct dm_table *map = dm_get_table(md); + int r = bdi_bits; + struct mapped_device *md = congested_data; + struct dm_table *map; - if (!map || test_bit(DMF_BLOCK_IO, &md->flags)) - r = bdi_bits; - else - r = dm_table_any_congested(map, bdi_bits); + atomic_inc(&md->pending); + + if (!test_bit(DMF_BLOCK_IO, &md->flags)) { + map = dm_get_table(md); + if (map) { + r = dm_table_any_congested(map, bdi_bits); + dm_table_put(map); + } + } + + if (!atomic_dec_return(&md->pending)) + /* nudge anyone waiting on suspend queue */ + wake_up(&md->wait); - dm_table_put(map); return r; } -- cgit v1.2.3-70-g09d2 From 3ec332ef7a38c2327e18d087d4120a8e3bd3dc6e Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 14 Nov 2008 03:35:10 +0000 Subject: [CIFS] clean up server protocol handling We're currently declaring both a sockaddr_in and sockaddr6_in on the stack, but we really only need storage for one of them. Declare a sockaddr struct and cast it to the proper type. Also, eliminate the protocolType field in the TCP_Server_Info struct. It's redundant since we have a sa_family field in the sockaddr anyway. We may need to revisit this if SCTP is ever implemented, but for now this will simplify the code. CIFS over IPv6 also has a number of problems currently. This fixes all of them that I found. Eventually, it would be nice to move more of the code to be protocol independent, but this is a start. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_spnego.c | 4 ++-- fs/cifs/cifsglob.h | 3 +-- fs/cifs/connect.c | 57 +++++++++++++++++++++++++++------------------------ 3 files changed, 33 insertions(+), 31 deletions(-) diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c index fcee9298b62..0ab2fb5afef 100644 --- a/fs/cifs/cifs_spnego.c +++ b/fs/cifs/cifs_spnego.c @@ -73,8 +73,8 @@ struct key_type cifs_spnego_key_type = { * strlen(";sec=ntlmsspi") */ #define MAX_MECH_STR_LEN 13 -/* max possible addr len eg FEDC:BA98:7654:3210:FEDC:BA98:7654:3210/60 */ -#define MAX_IPV6_ADDR_LEN 42 +/* max possible addr len eg FEDC:BA98:7654:3210:FEDC:BA98:7654:3210/128 */ +#define MAX_IPV6_ADDR_LEN 43 /* strlen of "host=" */ #define HOST_KEY_LEN 5 diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index d6357dc1be7..13dc48414a7 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -85,8 +85,7 @@ enum securityEnum { }; enum protocolEnum { - IPV4 = 0, - IPV6, + TCP = 0, SCTP /* Netbios frames protocol not supported at this time */ }; diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index c1cd1217c99..30ab8dc68e1 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -193,7 +193,7 @@ cifs_reconnect(struct TCP_Server_Info *server) while ((server->tcpStatus != CifsExiting) && (server->tcpStatus != CifsGood)) { try_to_freeze(); - if (server->protocolType == IPV6) { + if (server->addr.sockAddr6.sin6_family == AF_INET6) { rc = ipv6_connect(&server->addr.sockAddr6, &server->ssocket, server->noautotune); } else { @@ -1983,10 +1983,10 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, { int rc = 0; int xid; - int address_type = AF_INET; struct socket *csocket = NULL; - struct sockaddr_in sin_server; - struct sockaddr_in6 sin_server6; + struct sockaddr addr; + struct sockaddr_in *sin_server = (struct sockaddr_in *) &addr; + struct sockaddr_in6 *sin_server6 = (struct sockaddr_in6 *) &addr; struct smb_vol volume_info; struct cifsSesInfo *pSesInfo = NULL; struct cifsSesInfo *existingCifsSes = NULL; @@ -1997,6 +1997,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, /* cFYI(1, ("Entering cifs_mount. Xid: %d with: %s", xid, mount_data)); */ + memset(&addr, 0, sizeof(struct sockaddr)); memset(&volume_info, 0, sizeof(struct smb_vol)); if (cifs_parse_mount_options(mount_data, devname, &volume_info)) { rc = -EINVAL; @@ -2019,16 +2020,16 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (volume_info.UNCip && volume_info.UNC) { rc = cifs_inet_pton(AF_INET, volume_info.UNCip, - &sin_server.sin_addr.s_addr); + &sin_server->sin_addr.s_addr); if (rc <= 0) { /* not ipv4 address, try ipv6 */ rc = cifs_inet_pton(AF_INET6, volume_info.UNCip, - &sin_server6.sin6_addr.in6_u); + &sin_server6->sin6_addr.in6_u); if (rc > 0) - address_type = AF_INET6; + addr.sa_family = AF_INET6; } else { - address_type = AF_INET; + addr.sa_family = AF_INET; } if (rc <= 0) { @@ -2068,39 +2069,38 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } } - if (address_type == AF_INET) - existingCifsSes = cifs_find_tcp_session(&sin_server.sin_addr, + if (addr.sa_family == AF_INET) + existingCifsSes = cifs_find_tcp_session(&sin_server->sin_addr, NULL /* no ipv6 addr */, volume_info.username, &srvTcp); - else if (address_type == AF_INET6) { + else if (addr.sa_family == AF_INET6) { cFYI(1, ("looking for ipv6 address")); existingCifsSes = cifs_find_tcp_session(NULL /* no ipv4 addr */, - &sin_server6.sin6_addr, + &sin_server6->sin6_addr, volume_info.username, &srvTcp); } else { rc = -EINVAL; goto out; } - if (!srvTcp) { /* create socket */ - if (volume_info.port) - sin_server.sin_port = htons(volume_info.port); - else - sin_server.sin_port = 0; - if (address_type == AF_INET6) { + if (!srvTcp) { + if (addr.sa_family == AF_INET6) { cFYI(1, ("attempting ipv6 connect")); /* BB should we allow ipv6 on port 139? */ /* other OS never observed in Wild doing 139 with v6 */ - rc = ipv6_connect(&sin_server6, &csocket, + sin_server6->sin6_port = htons(volume_info.port); + rc = ipv6_connect(sin_server6, &csocket, volume_info.noblocksnd); - } else - rc = ipv4_connect(&sin_server, &csocket, + } else { + sin_server->sin_port = htons(volume_info.port); + rc = ipv4_connect(sin_server, &csocket, volume_info.source_rfc1001_name, volume_info.target_rfc1001_name, volume_info.noblocksnd, volume_info.noautotune); + } if (rc < 0) { - cERROR(1, ("Error connecting to IPv4 socket. " + cERROR(1, ("Error connecting to socket. " "Aborting operation")); if (csocket != NULL) sock_release(csocket); @@ -2115,12 +2115,15 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } else { srvTcp->noblocksnd = volume_info.noblocksnd; srvTcp->noautotune = volume_info.noautotune; - memcpy(&srvTcp->addr.sockAddr, &sin_server, - sizeof(struct sockaddr_in)); + if (addr.sa_family == AF_INET6) + memcpy(&srvTcp->addr.sockAddr6, sin_server6, + sizeof(struct sockaddr_in6)); + else + memcpy(&srvTcp->addr.sockAddr, sin_server, + sizeof(struct sockaddr_in)); atomic_set(&srvTcp->inFlight, 0); /* BB Add code for ipv6 case too */ srvTcp->ssocket = csocket; - srvTcp->protocolType = IPV4; srvTcp->hostname = extract_hostname(volume_info.UNC); if (IS_ERR(srvTcp->hostname)) { rc = PTR_ERR(srvTcp->hostname); @@ -2172,7 +2175,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, else { pSesInfo->server = srvTcp; sprintf(pSesInfo->serverName, "%u.%u.%u.%u", - NIPQUAD(sin_server.sin_addr.s_addr)); + NIPQUAD(sin_server->sin_addr.s_addr)); } if (!rc) { @@ -2211,7 +2214,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, setup_cifs_sb(&volume_info, cifs_sb); tcon = - find_unc(sin_server.sin_addr.s_addr, volume_info.UNC, + find_unc(sin_server->sin_addr.s_addr, volume_info.UNC, volume_info.username); if (tcon) { cFYI(1, ("Found match on UNC path")); -- cgit v1.2.3-70-g09d2 From e8f6fbf62de37cbc2e179176ac7010d5f4396b67 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 12 Nov 2008 01:38:36 +0000 Subject: lockdep: include/linux/lockdep.h - fix warning in net/bluetooth/af_bluetooth.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix this warning: net/bluetooth/af_bluetooth.c:60: warning: ‘bt_key_strings’ defined but not used net/bluetooth/af_bluetooth.c:71: warning: ‘bt_slock_key_strings’ defined but not used this is a lockdep macro problem in the !LOCKDEP case. We cannot convert it to an inline because the macro works on multiple types, but we can mark the parameter used. [ also clean up a misaligned tab in sock_lock_init_class_and_name() ] [ also remove #ifdefs from around af_family_clock_key strings - which were certainly added to get rid of the ugly build warnings. ] Signed-off-by: Ingo Molnar Signed-off-by: David S. Miller --- include/linux/lockdep.h | 5 +++-- include/net/sock.h | 2 +- net/core/sock.c | 2 -- 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h index 331e5f1c2d8..29aec6e1002 100644 --- a/include/linux/lockdep.h +++ b/include/linux/lockdep.h @@ -331,10 +331,11 @@ static inline void lockdep_on(void) # define lock_set_subclass(l, s, i) do { } while (0) # define lockdep_init() do { } while (0) # define lockdep_info() do { } while (0) -# define lockdep_init_map(lock, name, key, sub) do { (void)(key); } while (0) +# define lockdep_init_map(lock, name, key, sub) \ + do { (void)(name); (void)(key); } while (0) # define lockdep_set_class(lock, key) do { (void)(key); } while (0) # define lockdep_set_class_and_name(lock, key, name) \ - do { (void)(key); } while (0) + do { (void)(key); (void)(name); } while (0) #define lockdep_set_class_and_subclass(lock, key, sub) \ do { (void)(key); } while (0) #define lockdep_set_subclass(lock, sub) do { } while (0) diff --git a/include/net/sock.h b/include/net/sock.h index c04f9e18ea2..2f47107f6d0 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -815,7 +815,7 @@ static inline void sk_wmem_free_skb(struct sock *sk, struct sk_buff *skb) */ #define sock_lock_init_class_and_name(sk, sname, skey, name, key) \ do { \ - sk->sk_lock.owned = 0; \ + sk->sk_lock.owned = 0; \ init_waitqueue_head(&sk->sk_lock.wq); \ spin_lock_init(&(sk)->sk_lock.slock); \ debug_check_no_locks_freed((void *)&(sk)->sk_lock, \ diff --git a/net/core/sock.c b/net/core/sock.c index 5e2a3132a8c..341e3945695 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -136,7 +136,6 @@ static struct lock_class_key af_family_keys[AF_MAX]; static struct lock_class_key af_family_slock_keys[AF_MAX]; -#ifdef CONFIG_DEBUG_LOCK_ALLOC /* * Make lock validator output more readable. (we pre-construct these * strings build-time, so that runtime initialization of socket @@ -187,7 +186,6 @@ static const char *af_family_clock_key_strings[AF_MAX+1] = { "clock-AF_RXRPC" , "clock-AF_ISDN" , "clock-AF_PHONET" , "clock-AF_MAX" }; -#endif /* * sk_callback_lock locking rules are per-address-family, -- cgit v1.2.3-70-g09d2 From 131d3a7a009d56a96cc7117b4e9d0c90c2e2a1dc Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Fri, 14 Nov 2008 12:03:47 +0100 Subject: HID: don't grab devices with no input Some devices have no input interrupt endpoint. These won't be handled by usbhid, but currently they are not refused and reside on hid bus. Perform this checking earlier so that we refuse to control such a device early enough (and not pass it to the hid bus at all). Signed-off-by: Jiri Slaby Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index f0339aefc79..d746bf8284d 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -849,12 +849,6 @@ static int usbhid_start(struct hid_device *hid) } } - if (!usbhid->urbin) { - err_hid("couldn't find an input interrupt endpoint"); - ret = -ENODEV; - goto fail; - } - init_waitqueue_head(&usbhid->wait); INIT_WORK(&usbhid->reset_work, hid_reset); setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid); @@ -948,15 +942,26 @@ static struct hid_ll_driver usb_hid_driver = { static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) { + struct usb_host_interface *interface = intf->cur_altsetting; struct usb_device *dev = interface_to_usbdev(intf); struct usbhid_device *usbhid; struct hid_device *hid; + unsigned int n, has_in = 0; size_t len; int ret; dbg_hid("HID probe called for ifnum %d\n", intf->altsetting->desc.bInterfaceNumber); + for (n = 0; n < interface->desc.bNumEndpoints; n++) + if (usb_endpoint_is_int_in(&interface->endpoint[n].desc)) + has_in++; + if (!has_in) { + dev_err(&intf->dev, "couldn't find an input interrupt " + "endpoint\n"); + return -ENODEV; + } + hid = hid_allocate_device(); if (IS_ERR(hid)) return PTR_ERR(hid); -- cgit v1.2.3-70-g09d2 From 5c6533510335ab291dcc0e9cdb98e67b50f6b2e9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 13:06:33 -0300 Subject: V4L/DVB (9613): tvaudio: fix a memory leak Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index b59e47272ab..3332df890f0 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1481,6 +1481,7 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) } if (desc->name == NULL) { v4l_dbg(1, debug, client, "no matching chip description found\n"); + kfree(chip); return -EIO; } v4l_info(client, "%s found @ 0x%x (%s)\n", desc->name, client->addr<<1, client->adapter->name); -- cgit v1.2.3-70-g09d2 From 04e6f99025475a8cf2ccf2e39ffa48a6194a3b47 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 13:10:11 -0300 Subject: V4L/DVB (9615): tvaudio: instead of using a magic number, use ARRAY_SIZE Also, the default standard is the first one. So, fix the comment at the array. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 3332df890f0..cb8bf6d6f3d 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -777,7 +777,7 @@ static struct tda9874a_MODES { char *name; audiocmd cmd; } tda9874a_modelist[9] = { - { "A2, B/G", + { "A2, B/G", /* default */ { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x77,0xA0,0x00, 0x00,0x00 }} }, { "A2, M (Korea)", { 9, { TDA9874A_C1FRA, 0x5D,0xC0,0x00, 0x62,0x6A,0xAA, 0x20,0x22 }} }, @@ -791,7 +791,7 @@ static struct tda9874a_MODES { { 9, { TDA9874A_C1FRA, 0x7D,0x00,0x00, 0x88,0x8A,0xAA, 0x08,0x33 }} }, { "NICAM, B/G", { 9, { TDA9874A_C1FRA, 0x72,0x95,0x55, 0x79,0xEA,0xAA, 0x08,0x33 }} }, - { "NICAM, D/K", /* default */ + { "NICAM, D/K", { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x08,0x33 }} }, { "NICAM, L", { 9, { TDA9874A_C1FRA, 0x87,0x6A,0xAA, 0x79,0xEA,0xAA, 0x09,0x33 }} } @@ -981,7 +981,7 @@ static int tda9874a_initialize(struct CHIPSTATE *chip) { if (tda9874a_SIF > 2) tda9874a_SIF = 1; - if (tda9874a_STD > 8) + if (tda9874a_STD >= ARRAY_SIZE(tda9874a_modelist)) tda9874a_STD = 0; if(tda9874a_AMSEL > 1) tda9874a_AMSEL = 0; -- cgit v1.2.3-70-g09d2 From af1a9951fc5c89518c25c4d9f2c4b391b2e72b83 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 13:14:15 -0300 Subject: V4L/DVB (9616): tvaudio: cleanup - group all callbacks together Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index cb8bf6d6f3d..1fa481ca086 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1260,6 +1260,7 @@ static struct CHIPDESC chiplist[] = { .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 5, + /* callbacks */ .checkit = tda9840_checkit, .getmode = tda9840_getmode, .setmode = tda9840_setmode, @@ -1270,13 +1271,14 @@ static struct CHIPDESC chiplist[] = { }, { .name = "tda9873h", - .checkit = tda9873_checkit, .insmodopt = &tda9873, .addr_lo = I2C_ADDR_TDA985x_L >> 1, .addr_hi = I2C_ADDR_TDA985x_H >> 1, .registers = 3, .flags = CHIP_HAS_INPUTSEL, + /* callbacks */ + .checkit = tda9873_checkit, .getmode = tda9873_getmode, .setmode = tda9873_setmode, .checkmode = generic_checkmode, @@ -1290,12 +1292,13 @@ static struct CHIPDESC chiplist[] = { }, { .name = "tda9874h/a", - .checkit = tda9874a_checkit, - .initialize = tda9874a_initialize, .insmodopt = &tda9874a, .addr_lo = I2C_ADDR_TDA9874 >> 1, .addr_hi = I2C_ADDR_TDA9874 >> 1, + /* callbacks */ + .initialize = tda9874a_initialize, + .checkit = tda9874a_checkit, .getmode = tda9874a_getmode, .setmode = tda9874a_setmode, .checkmode = generic_checkmode, @@ -1324,10 +1327,11 @@ static struct CHIPDESC chiplist[] = { .rightreg = TDA9855_VR, .bassreg = TDA9855_BA, .treblereg = TDA9855_TR, + + /* callbacks */ .volfunc = tda9855_volume, .bassfunc = tda9855_bass, .treblefunc = tda9855_treble, - .getmode = tda985x_getmode, .setmode = tda985x_setmode, @@ -1348,6 +1352,8 @@ static struct CHIPDESC chiplist[] = { .rightreg = TEA6300_VL, .bassreg = TEA6300_BA, .treblereg = TEA6300_TR, + + /* callbacks */ .volfunc = tea6300_shift10, .bassfunc = tea6300_shift12, .treblefunc = tea6300_shift12, @@ -1358,7 +1364,6 @@ static struct CHIPDESC chiplist[] = { }, { .name = "tea6320", - .initialize = tea6320_initialize, .insmodopt = &tea6320, .addr_lo = I2C_ADDR_TEA6300 >> 1, .addr_hi = I2C_ADDR_TEA6300 >> 1, @@ -1369,6 +1374,9 @@ static struct CHIPDESC chiplist[] = { .rightreg = TEA6320_V, .bassreg = TEA6320_BA, .treblereg = TEA6320_TR, + + /* callbacks */ + .initialize = tea6320_initialize, .volfunc = tea6320_volume, .bassfunc = tea6320_shift11, .treblefunc = tea6320_shift11, @@ -1401,16 +1409,18 @@ static struct CHIPDESC chiplist[] = { .rightreg = TDA8425_VR, .bassreg = TDA8425_BA, .treblereg = TDA8425_TR, + + /* callbacks */ + .initialize = tda8425_initialize, .volfunc = tda8425_shift10, .bassfunc = tda8425_shift12, .treblefunc = tda8425_shift12, + .setmode = tda8425_setmode, .inputreg = TDA8425_S1, .inputmap = { TDA8425_S1_CH1, TDA8425_S1_CH1, TDA8425_S1_CH1 }, .inputmute = TDA8425_S1_OFF, - .setmode = tda8425_setmode, - .initialize = tda8425_initialize, }, { .name = "pic16c54 (PV951)", @@ -1435,6 +1445,7 @@ static struct CHIPDESC chiplist[] = { .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 2, + /* callbacks */ .getmode = ta8874z_getmode, .setmode = ta8874z_setmode, .checkmode = generic_checkmode, -- cgit v1.2.3-70-g09d2 From dd03e970a18f266faf120e47355349d224f64e3f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 13:55:39 -0300 Subject: V4L/DVB (9617): tvtime: remove generic_checkmode callback generic_checkmode() were called, via a callback, for some tvaudio chips. There's just one callback code used on all those boards. So, it makes no sense on keeping this as a callback. Since there were some OOPS reported on tvaudio on kerneloops.org, this patch removes this callback, adding the code at the only place were it is called: inside chip_tread. A flag were added to indicate the need for a kernel thread to set stereo mode on cards that needs it. Using this more direct approach simplifies the code, making it more robust against human errors. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 71 +++++++++++++++++++++---------------------- 1 file changed, 35 insertions(+), 36 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 1fa481ca086..1387c54b7f0 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -58,7 +58,6 @@ typedef int (*checkit)(struct CHIPSTATE*); typedef int (*initialize)(struct CHIPSTATE*); typedef int (*getmode)(struct CHIPSTATE*); typedef void (*setmode)(struct CHIPSTATE*, int mode); -typedef void (*checkmode)(struct CHIPSTATE*); /* i2c command */ typedef struct AUDIOCMD { @@ -79,6 +78,7 @@ struct CHIPDESC { #define CHIP_HAS_VOLUME 1 #define CHIP_HAS_BASSTREBLE 2 #define CHIP_HAS_INPUTSEL 4 +#define CHIP_NEED_CHECKMODE 8 /* various i2c command sequences */ audiocmd init; @@ -96,9 +96,6 @@ struct CHIPDESC { getmode getmode; setmode setmode; - /* check / autoswitch audio after channel switches */ - checkmode checkmode; - /* input switch register + values for v4l inputs */ int inputreg; int inputmap[4]; @@ -264,6 +261,7 @@ static int chip_thread(void *data) { struct CHIPSTATE *chip = data; struct CHIPDESC *desc = chiplist + chip->type; + int mode; v4l_dbg(1, debug, chip->c, "%s: thread started\n", chip->c->name); set_freezable(); @@ -282,7 +280,26 @@ static int chip_thread(void *data) continue; /* have a look what's going on */ - desc->checkmode(chip); + mode = desc->getmode(chip); + if (mode == chip->prevmode) + continue; + + /* chip detected a new audio mode - set it */ + v4l_dbg(1, debug, chip->c, "%s: thread checkmode\n", + chip->c->name); + + chip->prevmode = mode; + + if (mode & V4L2_TUNER_MODE_STEREO) + desc->setmode(chip, V4L2_TUNER_MODE_STEREO); + if (mode & V4L2_TUNER_MODE_LANG1_LANG2) + desc->setmode(chip, V4L2_TUNER_MODE_STEREO); + else if (mode & V4L2_TUNER_MODE_LANG1) + desc->setmode(chip, V4L2_TUNER_MODE_LANG1); + else if (mode & V4L2_TUNER_MODE_LANG2) + desc->setmode(chip, V4L2_TUNER_MODE_LANG2); + else + desc->setmode(chip, V4L2_TUNER_MODE_MONO); /* schedule next check */ mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); @@ -292,29 +309,6 @@ static int chip_thread(void *data) return 0; } -static void generic_checkmode(struct CHIPSTATE *chip) -{ - struct CHIPDESC *desc = chiplist + chip->type; - int mode = desc->getmode(chip); - - if (mode == chip->prevmode) - return; - - v4l_dbg(1, debug, chip->c, "%s: thread checkmode\n", chip->c->name); - chip->prevmode = mode; - - if (mode & V4L2_TUNER_MODE_STEREO) - desc->setmode(chip,V4L2_TUNER_MODE_STEREO); - if (mode & V4L2_TUNER_MODE_LANG1_LANG2) - desc->setmode(chip,V4L2_TUNER_MODE_STEREO); - else if (mode & V4L2_TUNER_MODE_LANG1) - desc->setmode(chip,V4L2_TUNER_MODE_LANG1); - else if (mode & V4L2_TUNER_MODE_LANG2) - desc->setmode(chip,V4L2_TUNER_MODE_LANG2); - else - desc->setmode(chip,V4L2_TUNER_MODE_MONO); -} - /* ---------------------------------------------------------------------- */ /* audio chip descriptions - defines+functions for tda9840 */ @@ -1259,12 +1253,12 @@ static struct CHIPDESC chiplist[] = { .addr_lo = I2C_ADDR_TDA9840 >> 1, .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 5, + .flags = CHIP_NEED_CHECKMODE, /* callbacks */ .checkit = tda9840_checkit, .getmode = tda9840_getmode, .setmode = tda9840_setmode, - .checkmode = generic_checkmode, .init = { 2, { TDA9840_TEST, TDA9840_TEST_INT1SN /* ,TDA9840_SW, TDA9840_MONO */} } @@ -1275,13 +1269,12 @@ static struct CHIPDESC chiplist[] = { .addr_lo = I2C_ADDR_TDA985x_L >> 1, .addr_hi = I2C_ADDR_TDA985x_H >> 1, .registers = 3, - .flags = CHIP_HAS_INPUTSEL, + .flags = CHIP_HAS_INPUTSEL | CHIP_NEED_CHECKMODE, /* callbacks */ .checkit = tda9873_checkit, .getmode = tda9873_getmode, .setmode = tda9873_setmode, - .checkmode = generic_checkmode, .init = { 4, { TDA9873_SW, 0xa4, 0x06, 0x03 } }, .inputreg = TDA9873_SW, @@ -1295,13 +1288,13 @@ static struct CHIPDESC chiplist[] = { .insmodopt = &tda9874a, .addr_lo = I2C_ADDR_TDA9874 >> 1, .addr_hi = I2C_ADDR_TDA9874 >> 1, + .flags = CHIP_NEED_CHECKMODE, /* callbacks */ .initialize = tda9874a_initialize, .checkit = tda9874a_checkit, .getmode = tda9874a_getmode, .setmode = tda9874a_setmode, - .checkmode = generic_checkmode, }, { .name = "tda9850", @@ -1444,11 +1437,11 @@ static struct CHIPDESC chiplist[] = { .addr_lo = I2C_ADDR_TDA9840 >> 1, .addr_hi = I2C_ADDR_TDA9840 >> 1, .registers = 2, + .flags = CHIP_NEED_CHECKMODE, /* callbacks */ .getmode = ta8874z_getmode, .setmode = ta8874z_setmode, - .checkmode = generic_checkmode, .init = {2, { TA8874Z_MONO_SET, TA8874Z_SEPARATION_DEFAULT}}, }, @@ -1531,7 +1524,7 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) } chip->thread = NULL; - if (desc->checkmode) { + if (desc->flags & CHIP_NEED_CHECKMODE) { /* start async thread */ init_timer(&chip->wt); chip->wt.function = chip_thread_wake; @@ -1804,12 +1797,18 @@ static int chip_command(struct i2c_client *client, break; case VIDIOC_S_FREQUENCY: chip->mode = 0; /* automatic */ - if (desc->checkmode && desc->setmode) { + + /* For chips that provide getmode, setmode and checkmode, + a kthread is created to automatically to set the audio + standard. In this case, start with MONO and wait 2 seconds + for the decoding to stablize. Then, run kthread to change + to stereo, if carrier detected. + */ + if (chip->thread) { desc->setmode(chip,V4L2_TUNER_MODE_MONO); if (chip->prevmode != V4L2_TUNER_MODE_MONO) chip->prevmode = -1; /* reset previous mode */ mod_timer(&chip->wt, jiffies+msecs_to_jiffies(2000)); - /* the thread will call checkmode() later */ } break; -- cgit v1.2.3-70-g09d2 From 099b7fcc770764ec06441066fddd90b97d868e11 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 14:01:15 -0300 Subject: V4L/DVB (9618): tvaudio: add additional logic to avoid OOPS This patch checks for volume, bass, treble, set mode and get mode callbacks before actually enabling the code that would use them. Instead of aborting the driver for load, this patch will allow it to load with a reduced number of functionatities. This prevents OOPS if some board entry is missing a needed callback. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 45 +++++++++++++++++++++++++++++++++++-------- 1 file changed, 37 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 1387c54b7f0..6c920bf7497 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1511,20 +1511,49 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) chip_cmd(chip,"init",&desc->init); if (desc->flags & CHIP_HAS_VOLUME) { - chip->left = desc->leftinit ? desc->leftinit : 65535; - chip->right = desc->rightinit ? desc->rightinit : 65535; - chip_write(chip,desc->leftreg,desc->volfunc(chip->left)); - chip_write(chip,desc->rightreg,desc->volfunc(chip->right)); + if (!desc->volfunc) { + /* This shouldn't be happen. Warn user, but keep working + without volume controls + */ + v4l_info(chip->c, "volume callback undefined!\n"); + desc->flags &= ~CHIP_HAS_VOLUME; + } else { + chip->left = desc->leftinit ? desc->leftinit : 65535; + chip->right = desc->rightinit ? desc->rightinit : 65535; + chip_write(chip, desc->leftreg, + desc->volfunc(chip->left)); + chip_write(chip, desc->rightreg, + desc->volfunc(chip->right)); + } } if (desc->flags & CHIP_HAS_BASSTREBLE) { - chip->treble = desc->trebleinit ? desc->trebleinit : 32768; - chip->bass = desc->bassinit ? desc->bassinit : 32768; - chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass)); - chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble)); + if (!desc->bassfunc || !desc->treblefunc) { + /* This shouldn't be happen. Warn user, but keep working + without bass/treble controls + */ + v4l_info(chip->c, "bass/treble callbacks undefined!\n"); + desc->flags &= ~CHIP_HAS_BASSTREBLE; + } else { + chip->treble = desc->trebleinit ? + desc->trebleinit : 32768; + chip->bass = desc->bassinit ? + desc->bassinit : 32768; + chip_write(chip, desc->bassreg, + desc->bassfunc(chip->bass)); + chip_write(chip, desc->treblereg, + desc->treblefunc(chip->treble)); + } } chip->thread = NULL; if (desc->flags & CHIP_NEED_CHECKMODE) { + if (!desc->getmode || !desc->setmode) { + /* This shouldn't be happen. Warn user, but keep working + without kthread + */ + v4l_info(chip->c, "set/get mode callbacks undefined!\n"); + return 0; + } /* start async thread */ init_timer(&chip->wt); chip->wt.function = chip_thread_wake; -- cgit v1.2.3-70-g09d2 From b4ab114cf750a49d91fc292439f8ef69a35a0fab Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 14:07:54 -0300 Subject: V4L/DVB (9619): tvaudio: update initial comments A driver used on several bttv boards since 2000 is not experimental anymore ;) Remove it from the comments. While there, update copyrights addind a quick note about the "recent" updates since 2005. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 6c920bf7497..ee6aca4ccd9 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1,5 +1,5 @@ /* - * experimental driver for simple i2c audio chips. + * Driver for simple i2c audio chips. * * Copyright (c) 2000 Gerd Knorr * based on code by: @@ -7,6 +7,10 @@ * Steve VanDeBogart (vandebo@uclink.berkeley.edu) * Greg Alexander (galexand@acm.org) * + * Copyright(c) 2005-2008 Mauro Carvalho Chehab + * - Some cleanups, code fixes, etc + * - Convert it to V4L2 API + * * This code is placed under the terms of the GNU General Public License * * OPTIONS: -- cgit v1.2.3-70-g09d2 From 81cb5c4f7fbe6971d9c61401bc47193290fd59b7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 16:22:53 -0300 Subject: V4L/DVB (9620): tvaudio: use a direct reference for chip description Instead of storing the pointer for the proper entry at chip description table, the driver were storing an indirect reference, by using an index. Better to reference directly the data. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index ee6aca4ccd9..5ec369d54e6 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -112,8 +112,9 @@ static struct CHIPDESC chiplist[]; struct CHIPSTATE { struct i2c_client *c; - /* index into CHIPDESC array */ - int type; + /* chip-specific description - should point to + an entry at CHIPDESC table */ + struct CHIPDESC *desc; /* shadow register set */ audiocmd shadow; @@ -264,7 +265,7 @@ static void chip_thread_wake(unsigned long data) static int chip_thread(void *data) { struct CHIPSTATE *chip = data; - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; int mode; v4l_dbg(1, debug, chip->c, "%s: thread started\n", chip->c->name); @@ -1087,7 +1088,7 @@ static int tda8425_shift12(int val) { return (val >> 12) | 0xf0; } static int tda8425_initialize(struct CHIPSTATE *chip) { - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; int inputmap[4] = { /* tuner */ TDA8425_S1_CH2, /* radio */ TDA8425_S1_CH1, /* extern */ TDA8425_S1_CH1, /* intern */ TDA8425_S1_OFF}; @@ -1503,7 +1504,7 @@ static int chip_probe(struct i2c_client *client, const struct i2c_device_id *id) /* fill required data structures */ if (!id) strlcpy(client->name, desc->name, I2C_NAME_SIZE); - chip->type = desc-chiplist; + chip->desc = desc; chip->shadow.count = desc->registers+1; chip->prevmode = -1; chip->audmode = V4L2_TUNER_MODE_LANG1; @@ -1590,7 +1591,7 @@ static int chip_remove(struct i2c_client *client) static int tvaudio_get_ctrl(struct CHIPSTATE *chip, struct v4l2_control *ctrl) { - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -1630,7 +1631,7 @@ static int tvaudio_get_ctrl(struct CHIPSTATE *chip, static int tvaudio_set_ctrl(struct CHIPSTATE *chip, struct v4l2_control *ctrl) { - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; switch (ctrl->id) { case V4L2_CID_AUDIO_MUTE: @@ -1706,7 +1707,7 @@ static int chip_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct CHIPSTATE *chip = i2c_get_clientdata(client); - struct CHIPDESC *desc = chiplist + chip->type; + struct CHIPDESC *desc = chip->desc; v4l_dbg(1, debug, chip->c, "%s: chip_command 0x%x\n", chip->c->name, cmd); -- cgit v1.2.3-70-g09d2 From 494264379d186bf806613d27aafb7d88d42f4212 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 17:03:28 -0300 Subject: V4L/DVB (9621): Avoid writing outside shadow.bytes[] array There were no check about the limits of shadow.bytes array. This offers a risk of writing values outside the limits, overriding other data areas. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 5ec369d54e6..55b39b9a33d 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -154,7 +154,7 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) { unsigned char buffer[2]; - if (-1 == subaddr) { + if (subaddr < 0) { v4l_dbg(1, debug, chip->c, "%s: chip_write: 0x%x\n", chip->c->name, val); chip->shadow.bytes[1] = val; @@ -165,6 +165,13 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) return -1; } } else { + if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l_info(chip->c, + "Tried to access a non-existent register: %d\n", + subaddr); + return -EINVAL; + } + v4l_dbg(1, debug, chip->c, "%s: chip_write: reg%d=0x%x\n", chip->c->name, subaddr, val); chip->shadow.bytes[subaddr+1] = val; @@ -179,12 +186,20 @@ static int chip_write(struct CHIPSTATE *chip, int subaddr, int val) return 0; } -static int chip_write_masked(struct CHIPSTATE *chip, int subaddr, int val, int mask) +static int chip_write_masked(struct CHIPSTATE *chip, + int subaddr, int val, int mask) { if (mask != 0) { - if (-1 == subaddr) { + if (subaddr < 0) { val = (chip->shadow.bytes[1] & ~mask) | (val & mask); } else { + if (subaddr + 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l_info(chip->c, + "Tried to access a non-existent register: %d\n", + subaddr); + return -EINVAL; + } + val = (chip->shadow.bytes[subaddr+1] & ~mask) | (val & mask); } } @@ -230,6 +245,15 @@ static int chip_cmd(struct CHIPSTATE *chip, char *name, audiocmd *cmd) if (0 == cmd->count) return 0; + if (cmd->count + cmd->bytes[0] - 1 >= ARRAY_SIZE(chip->shadow.bytes)) { + v4l_info(chip->c, + "Tried to access a non-existent register range: %d to %d\n", + cmd->bytes[0] + 1, cmd->bytes[0] + cmd->count - 1); + return -EINVAL; + } + + /* FIXME: it seems that the shadow bytes are wrong bellow !*/ + /* update our shadow register set; print bytes if (debug > 0) */ v4l_dbg(1, debug, chip->c, "%s: chip_cmd(%s): reg=%d, data:", chip->c->name, name,cmd->bytes[0]); -- cgit v1.2.3-70-g09d2 From 41f5230f3fc6296d0d88ab9f4c3c07fcbbe53e59 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 17:25:04 -0300 Subject: V4L/DVB (9622): tvaudio: Improve comments and remove a unneeded prototype Some comments are not clear enough. Improve it to allow a better understanding of the driver behavior. While there, remove an unneeded struct prototype. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 55b39b9a33d..779ce7f865c 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -106,7 +106,6 @@ struct CHIPDESC { int inputmute; int inputmask; }; -static struct CHIPDESC chiplist[]; /* current state of the chip */ struct CHIPSTATE { @@ -1856,11 +1855,13 @@ static int chip_command(struct i2c_client *client, case VIDIOC_S_FREQUENCY: chip->mode = 0; /* automatic */ - /* For chips that provide getmode, setmode and checkmode, - a kthread is created to automatically to set the audio - standard. In this case, start with MONO and wait 2 seconds - for the decoding to stablize. Then, run kthread to change - to stereo, if carrier detected. + /* For chips that provide getmode and setmode, and doesn't + automatically follows the stereo carrier, a kthread is + created to set the audio standard. In this case, when then + the video channel is changed, tvaudio starts on MONO mode. + After waiting for 2 seconds, the kernel thread is called, + to follow whatever audio standard is pointed by the + audio carrier. */ if (chip->thread) { desc->setmode(chip,V4L2_TUNER_MODE_MONO); @@ -1905,9 +1906,3 @@ static struct v4l2_i2c_driver_data v4l2_i2c_data = { .legacy_probe = chip_legacy_probe, .id_table = chip_id, }; - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ -- cgit v1.2.3-70-g09d2 From c6241b6c64dbe759e0eccaee913bdcf4d7960367 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 13 Nov 2008 18:12:43 -0300 Subject: V4L/DVB (9623): tvaudio: Improve debug msg by printing something more human Before the patch, the used ioctl were printed as an hexadecimal code, hard to be understand without consulting the way _IO macros work. Instead, use the V4L default handler for printing such errors into a way that would be easier to understand. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index 779ce7f865c..fb46ce4a109 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -34,6 +34,7 @@ #include #include +#include #include #include @@ -1732,7 +1733,10 @@ static int chip_command(struct i2c_client *client, struct CHIPSTATE *chip = i2c_get_clientdata(client); struct CHIPDESC *desc = chip->desc; - v4l_dbg(1, debug, chip->c, "%s: chip_command 0x%x\n", chip->c->name, cmd); + if (debug > 0) { + v4l_i2c_print_ioctl(chip->c, cmd); + printk("\n"); + } switch (cmd) { case AUDC_SET_RADIO: -- cgit v1.2.3-70-g09d2 From 01a1a3cc1e3fbe718bd06a2a5d4d1a2d0fb4d7d9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 14 Nov 2008 10:46:59 -0300 Subject: V4L/DVB (9624): CVE-2008-5033: fix OOPS on tvaudio when controlling bass/treble This bug were supposed to be fixed by 5ba2f67afb02c5302b2898949ed6fc3b3d37dcf1, where a call to NULL happens. Not all tvaudio chips allow controlling bass/treble. So, the driver has a table with a flag to indicate if the chip does support it. Unfortunately, the handling of this logic were broken for a very long time (probably since the first module version). Due to that, an OOPS were generated for devices that don't support bass/treble. This were the resulting OOPS message before the patch, with debug messages enabled: tvaudio' 1-005b: VIDIOC_S_CTRL BUG: unable to handle kernel NULL pointer dereference at 00000000 IP: [<00000000>] *pde = 22fda067 *pte = 00000000 Oops: 0000 [#1] SMP Modules linked in: snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_hwdep snd soundcore tuner_simple tuner_types tea5767 tuner tvaudio bttv bridgebnep rfcomm l2cap bluetooth it87 hwmon_vid hwmon fuse sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 dm_mirrordm_multipath dm_mod configfs videodev v4l1_compat ir_common 8139cp compat_ioctl32 v4l2_common 8139too videobuf_dma_sg videobuf_core mii btcx_risc tveeprom i915 button snd_page_alloc serio_raw drm pcspkr i2c_algo_bit i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support sr_mod cdrom sg ata_generic pata_acpi ata_piix libata sd_mod scsi_mod ext3 jbdmbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: soundcore] Pid: 15413, comm: qv4l2 Not tainted (2.6.25.14-108.fc9.i686 #1) EIP: 0060:[<00000000>] EFLAGS: 00210246 CPU: 0 EIP is at 0x0 EAX: 00008000 EBX: ebd21600 ECX: e2fd9ec4 EDX: 00200046 ESI: f8c0f0c4 EDI: f8c0f0c4 EBP: e2fd9d50 ESP: e2fd9d2c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process qv4l2 (pid: 15413, ti=e2fd9000 task=ebe44000 task.ti=e2fd9000) Stack: f8c0c6ae e2ff2a00 00000d00 e2fd9ec4 ebc4e000 e2fd9d5c f8c0c448 00000000 f899c12a e2fd9d5c f899c154 e2fd9d68 e2fd9d80 c0560185 e2fd9d88 f8f3e1d8 f8f3e1dc ebc4e034 f8f3e18c e2fd9ec4 00000000 e2fd9d90 f899c286 c008561c Call Trace: [] ? chip_command+0x266/0x4b6 [tvaudio] [] ? chip_command+0x0/0x4b6 [tvaudio] [] ? i2c_cmd+0x0/0x2f [i2c_core] [] ? i2c_cmd+0x2a/0x2f [i2c_core] [] ? device_for_each_child+0x21/0x49 [] ? i2c_clients_command+0x1c/0x1e [i2c_core] [] ? bttv_call_i2c_clients+0x14/0x16 [bttv] [] ? bttv_s_ctrl+0x1bc/0x313 [bttv] [] ? bttv_s_ctrl+0x0/0x313 [bttv] [] ? __video_do_ioctl+0x1f84/0x3726 [videodev] [] ? sock_aio_write+0x100/0x10d [] ? kmap_atomic_prot+0x1dd/0x1df [] ? enqueue_hrtimer+0xc2/0xcd [] ? copy_from_user+0x39/0x121 [] ? __video_ioctl2+0x1aa/0x24a [videodev] [] ? do_notify_resume+0x768/0x795 [] ? getnstimeofday+0x34/0xd1 [] ? autoremove_wake_function+0x0/0x33 [] ? video_ioctl2+0xf/0x13 [videodev] [] ? vfs_ioctl+0x50/0x69 [] ? do_vfs_ioctl+0x239/0x24c [] ? sys_ioctl+0x40/0x5b [] ? syscall_call+0x7/0xb [] ? cpuid4_cache_sysfs_exit+0x3d/0x69 ======================= Code: Bad EIP value. EIP: [<00000000>] 0x0 SS:ESP 0068:e2fd9d2c Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/tvaudio.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c index fb46ce4a109..3720f0e03a1 100644 --- a/drivers/media/video/tvaudio.c +++ b/drivers/media/video/tvaudio.c @@ -1639,13 +1639,13 @@ static int tvaudio_get_ctrl(struct CHIPSTATE *chip, return 0; } case V4L2_CID_AUDIO_BASS: - if (desc->flags & CHIP_HAS_BASSTREBLE) + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) break; ctrl->value = chip->bass; return 0; case V4L2_CID_AUDIO_TREBLE: - if (desc->flags & CHIP_HAS_BASSTREBLE) - return -EINVAL; + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) + break; ctrl->value = chip->treble; return 0; } @@ -1705,16 +1705,15 @@ static int tvaudio_set_ctrl(struct CHIPSTATE *chip, return 0; } case V4L2_CID_AUDIO_BASS: - if (desc->flags & CHIP_HAS_BASSTREBLE) + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) break; chip->bass = ctrl->value; chip_write(chip,desc->bassreg,desc->bassfunc(chip->bass)); return 0; case V4L2_CID_AUDIO_TREBLE: - if (desc->flags & CHIP_HAS_BASSTREBLE) - return -EINVAL; - + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) + break; chip->treble = ctrl->value; chip_write(chip,desc->treblereg,desc->treblefunc(chip->treble)); @@ -1761,7 +1760,7 @@ static int chip_command(struct i2c_client *client, break; case V4L2_CID_AUDIO_BASS: case V4L2_CID_AUDIO_TREBLE: - if (desc->flags & CHIP_HAS_BASSTREBLE) + if (!(desc->flags & CHIP_HAS_BASSTREBLE)) return -EINVAL; break; default: -- cgit v1.2.3-70-g09d2 From fb2e7c5e33b341699f139b2ed972dca0a463a670 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Fri, 14 Nov 2008 18:18:00 +0100 Subject: [S390] Fix range for add_active_range() in setup_memory() add_active_range() expects start_pfn + size as end_pfn value, i.e. not the pfn of the last page frame but the one behind that. We used the pfn of the last page frame so far, which can lead to a BUG_ON in move_freepages(), when the kernelcore parameter is specified (page_zone(start_page) != page_zone(end_page)). Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 62122bad1e3..400b040df7f 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -604,13 +604,13 @@ setup_memory(void) if (memory_chunk[i].type != CHUNK_READ_WRITE) continue; start_chunk = PFN_DOWN(memory_chunk[i].addr); - end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size) - 1; + end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size); end_chunk = min(end_chunk, end_pfn); if (start_chunk >= end_chunk) continue; add_active_range(0, start_chunk, end_chunk); pfn = max(start_chunk, start_pfn); - for (; pfn <= end_chunk; pfn++) + for (; pfn < end_chunk; pfn++) page_set_storage_key(PFN_PHYS(pfn), PAGE_DEFAULT_KEY); } -- cgit v1.2.3-70-g09d2 From 675be97a32a5f12650b86391b7431f1e10811f1e Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 14 Nov 2008 18:18:01 +0100 Subject: [S390] sclp: emit error message if assign storage fails Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_cmd.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index eb5f1b8bc57..ec9c0bcf66e 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -324,6 +324,9 @@ static int do_assign_storage(sclp_cmdw_t cmd, u16 rn) case 0x0120: break; default: + pr_warning("assign storage failed (cmd=0x%08x, " + "response=0x%04x, rn=0x%04x)\n", cmd, + sccb->header.response_code, rn); rc = -EIO; break; } -- cgit v1.2.3-70-g09d2 From cc835f7872adef35076e4a3b6632ef79bb4805be Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Fri, 14 Nov 2008 18:18:02 +0100 Subject: [S390] kvm_s390: Fix oops in virtio device detection with "mem=" The current virtio model on s390 has the descriptor page above the main memory. The guest virtio detection will oops if the mem= parameter is used to reduce/change the memory size. We have to use real_memory_size instead of max_pfn to detect the virtio descriptor pages. Signed-off-by: Christian Borntraeger --- drivers/s390/kvm/kvm_virtio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index ff4a6931bb8..3d442444c61 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -322,13 +322,13 @@ static int __init kvm_devices_init(void) return rc; } - rc = vmem_add_mapping(PFN_PHYS(max_pfn), PAGE_SIZE); + rc = vmem_add_mapping(real_memory_size, PAGE_SIZE); if (rc) { s390_root_dev_unregister(kvm_root); return rc; } - kvm_devices = (void *) PFN_PHYS(max_pfn); + kvm_devices = (void *) real_memory_size; ctl_set_bit(0, 9); register_external_interrupt(0x2603, kvm_extint_handler); -- cgit v1.2.3-70-g09d2 From af4c68740e848019d8d14c52704ed8eacceddac6 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 14 Nov 2008 18:18:03 +0100 Subject: [S390] lockdep: fix compile bug arch/s390/kernel/built-in.o: In function `cleanup_io_leave_insn': mem_detect.c:(.text+0x10592): undefined reference to `lockdep_sys_exit' Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/entry.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index ed500ef799b..5f0c4fba87c 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -1116,6 +1116,8 @@ cleanup_io_leave_insn: .Ltrace_irq_on: .long trace_hardirqs_on .Ltrace_irq_off: .long trace_hardirqs_off +#endif +#ifdef CONFIG_LOCKDEP .Llockdep_sys_exit: .long lockdep_sys_exit #endif -- cgit v1.2.3-70-g09d2 From 632448f65001c4935ed0d3bb362017d773da2eca Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 14 Nov 2008 18:18:04 +0100 Subject: [S390] ftrace: disable tracing on idle psw Disable tracing on idle psw. Otherwise it would give us huge preempt off times for idle. Which is rather pointless. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/process.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 3e2c05cb6a8..04f8c67a610 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -136,9 +136,12 @@ static void default_idle(void) return; } trace_hardirqs_on(); + /* Don't trace preempt off for idle. */ + stop_critical_timings(); /* Wait for external, I/O or machine check interrupt. */ __load_psw_mask(psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_IO | PSW_MASK_EXT); + start_critical_timings(); } void cpu_idle(void) -- cgit v1.2.3-70-g09d2 From 50bec4ce5d36ebf96189dcc54e20c7fce4bf61bf Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 14 Nov 2008 18:18:05 +0100 Subject: [S390] ftrace: fix kernel stack backchain walking With CONFIG_IRQSOFF_TRACER the trace_hardirqs_off() function includes a call to __builtin_return_address(1). But we calltrace_hardirqs_off() from early entry code. There we have just a single stack frame. So this results in a kernel stack backchain walk that would walk beyond the kernel stack. Following the NULL terminated backchain this results in a lowcore read access. To fix this we simply call trace_hardirqs_off_caller() and pass the current instruction pointer. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/entry.S | 18 +++++++++++------- arch/s390/kernel/entry64.S | 11 +++++++---- 2 files changed, 18 insertions(+), 11 deletions(-) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 5f0c4fba87c..08844fc24a2 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -61,22 +61,25 @@ STACK_SIZE = 1 << STACK_SHIFT #ifdef CONFIG_TRACE_IRQFLAGS .macro TRACE_IRQS_ON - l %r1,BASED(.Ltrace_irq_on) + basr %r2,%r0 + l %r1,BASED(.Ltrace_irq_on_caller) basr %r14,%r1 .endm .macro TRACE_IRQS_OFF - l %r1,BASED(.Ltrace_irq_off) + basr %r2,%r0 + l %r1,BASED(.Ltrace_irq_off_caller) basr %r14,%r1 .endm .macro TRACE_IRQS_CHECK + basr %r2,%r0 tm SP_PSW(%r15),0x03 # irqs enabled? jz 0f - l %r1,BASED(.Ltrace_irq_on) + l %r1,BASED(.Ltrace_irq_on_caller) basr %r14,%r1 j 1f -0: l %r1,BASED(.Ltrace_irq_off) +0: l %r1,BASED(.Ltrace_irq_off_caller) basr %r14,%r1 1: .endm @@ -1113,9 +1116,10 @@ cleanup_io_leave_insn: .Lschedtail: .long schedule_tail .Lsysc_table: .long sys_call_table #ifdef CONFIG_TRACE_IRQFLAGS -.Ltrace_irq_on: .long trace_hardirqs_on -.Ltrace_irq_off: - .long trace_hardirqs_off +.Ltrace_irq_on_caller: + .long trace_hardirqs_on_caller +.Ltrace_irq_off_caller: + .long trace_hardirqs_off_caller #endif #ifdef CONFIG_LOCKDEP .Llockdep_sys_exit: diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index d7ce150453f..41aca06682a 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -61,19 +61,22 @@ _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ #ifdef CONFIG_TRACE_IRQFLAGS .macro TRACE_IRQS_ON - brasl %r14,trace_hardirqs_on + basr %r2,%r0 + brasl %r14,trace_hardirqs_on_caller .endm .macro TRACE_IRQS_OFF - brasl %r14,trace_hardirqs_off + basr %r2,%r0 + brasl %r14,trace_hardirqs_off_caller .endm .macro TRACE_IRQS_CHECK + basr %r2,%r0 tm SP_PSW(%r15),0x03 # irqs enabled? jz 0f - brasl %r14,trace_hardirqs_on + brasl %r14,trace_hardirqs_on_caller j 1f -0: brasl %r14,trace_hardirqs_off +0: brasl %r14,trace_hardirqs_off_caller 1: .endm #else -- cgit v1.2.3-70-g09d2 From 85acc407bf1c49fb40b8f461c2c7526af736d87e Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Fri, 14 Nov 2008 18:18:06 +0100 Subject: [S390] cio: Fix refcount after moving devices. In ccw_device_move_to_orphanage(), a replacing ccw_device is searched via get_{disc,orphaned}_ccwdev_by_dev_id() which obtain a reference on the returned ccw_device. This reference must be given up again after the device has been moved to its new parent. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/device.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index 4e78c82194b..4e4008325e2 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -874,11 +874,15 @@ void ccw_device_move_to_orphanage(struct work_struct *work) replacing_cdev = get_disc_ccwdev_by_dev_id(&dev_id, cdev); if (replacing_cdev) { sch_attach_disconnected_device(sch, replacing_cdev); + /* Release reference from get_disc_ccwdev_by_dev_id() */ + put_device(&cdev->dev); return; } replacing_cdev = get_orphaned_ccwdev_by_dev_id(css, &dev_id); if (replacing_cdev) { sch_attach_orphaned_device(sch, replacing_cdev); + /* Release reference from get_orphaned_ccwdev_by_dev_id() */ + put_device(&cdev->dev); return; } sch_create_and_recog_new_device(sch); -- cgit v1.2.3-70-g09d2 From 74af283102b358b0da545460d0d176f473e110f6 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 14 Nov 2008 18:18:07 +0100 Subject: [S390] cpu topology: fix locking cpu_coregroup_map used to grab a mutex on s390 since it was only called from process context. Since c7c22e4d5c1fdebfac4dba76de7d0338c2b0d832 "block: add support for IO CPU affinity" this is not true anymore. It now also gets called from softirq context. To prevent possible deadlocks change this in architecture code and use a spinlock instead of a mutex. Cc: stable@kernel.org Cc: Jens Axboe Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/topology.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 632b13e1005..a947899dcba 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -65,18 +65,21 @@ static int machine_has_topology_irq; static struct timer_list topology_timer; static void set_topology_timer(void); static DECLARE_WORK(topology_work, topology_work_fn); +/* topology_lock protects the core linked list */ +static DEFINE_SPINLOCK(topology_lock); cpumask_t cpu_core_map[NR_CPUS]; cpumask_t cpu_coregroup_map(unsigned int cpu) { struct core_info *core = &core_info; + unsigned long flags; cpumask_t mask; cpus_clear(mask); if (!machine_has_topology) return cpu_present_map; - mutex_lock(&smp_cpu_state_mutex); + spin_lock_irqsave(&topology_lock, flags); while (core) { if (cpu_isset(cpu, core->mask)) { mask = core->mask; @@ -84,7 +87,7 @@ cpumask_t cpu_coregroup_map(unsigned int cpu) } core = core->next; } - mutex_unlock(&smp_cpu_state_mutex); + spin_unlock_irqrestore(&topology_lock, flags); if (cpus_empty(mask)) mask = cpumask_of_cpu(cpu); return mask; @@ -133,7 +136,7 @@ static void tl_to_cores(struct tl_info *info) union tl_entry *tle, *end; struct core_info *core = &core_info; - mutex_lock(&smp_cpu_state_mutex); + spin_lock_irq(&topology_lock); clear_cores(); tle = info->tle; end = (union tl_entry *)((unsigned long)info + info->length); @@ -157,7 +160,7 @@ static void tl_to_cores(struct tl_info *info) } tle = next_tle(tle); } - mutex_unlock(&smp_cpu_state_mutex); + spin_unlock_irq(&topology_lock); } static void topology_update_polarization_simple(void) -- cgit v1.2.3-70-g09d2 From a9cffb227d59db526286cc9f84bf258e68a97470 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Fri, 14 Nov 2008 18:18:08 +0100 Subject: [S390] dasd: log sense for fatal errors The logging of sense data for fatal errors was accidentally removed during Hyper PAV implementation. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 4b76fca64a6..363bd1303d2 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1746,6 +1746,11 @@ restart: goto restart; } + /* log sense for fatal error */ + if (cqr->status == DASD_CQR_FAILED) { + dasd_log_sense(cqr, &cqr->irb); + } + /* First of all call extended error reporting. */ if (dasd_eer_enabled(base) && cqr->status == DASD_CQR_FAILED) { -- cgit v1.2.3-70-g09d2 From d2f019fe40e8fecd822f87bc759f74925a5c31d6 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 14 Nov 2008 18:18:09 +0100 Subject: [S390] fix s390x_newuname The uname system call for 64 bit compares current->personality without masking the upper 16 bits. If e.g. READ_IMPLIES_EXEC is set the result of a uname system call will always be s390x even if the process uses the s390 personality. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/sys_s390.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c index 5fdb799062b..4fe952e557a 100644 --- a/arch/s390/kernel/sys_s390.c +++ b/arch/s390/kernel/sys_s390.c @@ -198,7 +198,7 @@ asmlinkage long s390x_newuname(struct new_utsname __user *name) { int ret = sys_newuname(name); - if (current->personality == PER_LINUX32 && !ret) { + if (personality(current->personality) == PER_LINUX32 && !ret) { ret = copy_to_user(name->machine, "s390\0\0\0\0", 8); if (ret) ret = -EFAULT; } -- cgit v1.2.3-70-g09d2 From 31c00fc15ebd35c1647775dbfc167a15d46657fd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 13 Nov 2008 21:33:24 +0000 Subject: Create/use more directory structure in the Documentation/ tree. Create Documentation/blockdev/ sub-directory and populate it. Populate the Documentation/serial/ sub-directory. Move MSI-HOWTO.txt to Documentation/PCI/. Move ioctl-number.txt to Documentation/ioctl/. Update all relevant 00-INDEX files. Update all relevant Kconfig files and source files. Signed-off-by: Randy Dunlap --- Documentation/00-INDEX | 42 +- Documentation/MSI-HOWTO.txt | 509 ----------------------- Documentation/PCI/00-INDEX | 2 + Documentation/PCI/MSI-HOWTO.txt | 509 +++++++++++++++++++++++ Documentation/README.DAC960 | 756 ---------------------------------- Documentation/README.cycladesZ | 8 - Documentation/blockdev/00-INDEX | 16 + Documentation/blockdev/README.DAC960 | 756 ++++++++++++++++++++++++++++++++++ Documentation/blockdev/cciss.txt | 171 ++++++++ Documentation/blockdev/cpqarray.txt | 93 +++++ Documentation/blockdev/floppy.txt | 245 +++++++++++ Documentation/blockdev/nbd.txt | 47 +++ Documentation/blockdev/paride.txt | 417 +++++++++++++++++++ Documentation/blockdev/ramdisk.txt | 165 ++++++++ Documentation/cciss.txt | 171 -------- Documentation/computone.txt | 522 ----------------------- Documentation/cpqarray.txt | 93 ----- Documentation/digiepca.txt | 98 ----- Documentation/floppy.txt | 245 ----------- Documentation/hayes-esp.txt | 154 ------- Documentation/ioctl-number.txt | 201 --------- Documentation/ioctl/00-INDEX | 10 + Documentation/ioctl/ioctl-number.txt | 201 +++++++++ Documentation/kernel-parameters.txt | 24 +- Documentation/moxa-smartio | 523 ----------------------- Documentation/nbd.txt | 47 --- Documentation/paride.txt | 417 ------------------- Documentation/ramdisk.txt | 165 -------- Documentation/riscom8.txt | 36 -- Documentation/rocket.txt | 189 --------- Documentation/serial/00-INDEX | 24 ++ Documentation/serial/README.cycladesZ | 8 + Documentation/serial/computone.txt | 522 +++++++++++++++++++++++ Documentation/serial/digiepca.txt | 98 +++++ Documentation/serial/hayes-esp.txt | 154 +++++++ Documentation/serial/moxa-smartio | 523 +++++++++++++++++++++++ Documentation/serial/riscom8.txt | 36 ++ Documentation/serial/rocket.txt | 189 +++++++++ Documentation/serial/specialix.txt | 383 +++++++++++++++++ Documentation/serial/stallion.txt | 392 ++++++++++++++++++ Documentation/serial/sx.txt | 294 +++++++++++++ Documentation/serial/tty.txt | 292 +++++++++++++ Documentation/specialix.txt | 383 ----------------- Documentation/stallion.txt | 392 ------------------ Documentation/sx.txt | 294 ------------- Documentation/tty.txt | 292 ------------- drivers/block/Kconfig | 29 +- drivers/block/floppy.c | 2 +- drivers/char/Kconfig | 24 +- drivers/char/specialix.c | 2 +- 50 files changed, 5590 insertions(+), 5575 deletions(-) delete mode 100644 Documentation/MSI-HOWTO.txt create mode 100644 Documentation/PCI/MSI-HOWTO.txt delete mode 100644 Documentation/README.DAC960 delete mode 100644 Documentation/README.cycladesZ create mode 100644 Documentation/blockdev/00-INDEX create mode 100644 Documentation/blockdev/README.DAC960 create mode 100644 Documentation/blockdev/cciss.txt create mode 100644 Documentation/blockdev/cpqarray.txt create mode 100644 Documentation/blockdev/floppy.txt create mode 100644 Documentation/blockdev/nbd.txt create mode 100644 Documentation/blockdev/paride.txt create mode 100644 Documentation/blockdev/ramdisk.txt delete mode 100644 Documentation/cciss.txt delete mode 100644 Documentation/computone.txt delete mode 100644 Documentation/cpqarray.txt delete mode 100644 Documentation/digiepca.txt delete mode 100644 Documentation/floppy.txt delete mode 100644 Documentation/hayes-esp.txt delete mode 100644 Documentation/ioctl-number.txt create mode 100644 Documentation/ioctl/00-INDEX create mode 100644 Documentation/ioctl/ioctl-number.txt delete mode 100644 Documentation/moxa-smartio delete mode 100644 Documentation/nbd.txt delete mode 100644 Documentation/paride.txt delete mode 100644 Documentation/ramdisk.txt delete mode 100644 Documentation/riscom8.txt delete mode 100644 Documentation/rocket.txt create mode 100644 Documentation/serial/00-INDEX create mode 100644 Documentation/serial/README.cycladesZ create mode 100644 Documentation/serial/computone.txt create mode 100644 Documentation/serial/digiepca.txt create mode 100644 Documentation/serial/hayes-esp.txt create mode 100644 Documentation/serial/moxa-smartio create mode 100644 Documentation/serial/riscom8.txt create mode 100644 Documentation/serial/rocket.txt create mode 100644 Documentation/serial/specialix.txt create mode 100644 Documentation/serial/stallion.txt create mode 100644 Documentation/serial/sx.txt create mode 100644 Documentation/serial/tty.txt delete mode 100644 Documentation/specialix.txt delete mode 100644 Documentation/stallion.txt delete mode 100644 Documentation/sx.txt delete mode 100644 Documentation/tty.txt diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index edef85ce119..2f969e2bece 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -42,14 +42,8 @@ IRQ.txt - description of what an IRQ is. ManagementStyle - how to (attempt to) manage kernel hackers. -MSI-HOWTO.txt - - the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ. RCU/ - directory with info on RCU (read-copy update). -README.DAC960 - - info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux. -README.cycladesZ - - info on Cyclades-Z firmware loading. SAK.txt - info on Secure Attention Keys. SM501.txt @@ -86,20 +80,16 @@ blackfin/ - directory with documentation for the Blackfin arch. block/ - info on the Block I/O (BIO) layer. +blockdev/ + - info on block devices & drivers cachetlb.txt - describes the cache/TLB flushing interfaces Linux uses. -cciss.txt - - info, major/minor #'s for Compaq's SMART Array Controllers. cdrom/ - directory with information on the CD-ROM drivers that Linux has. -computone.txt - - info on Computone Intelliport II/Plus Multiport Serial Driver. connector/ - docs on the netlink based userspace<->kernel space communication mod. console/ - documentation on Linux console drivers. -cpqarray.txt - - info on using Compaq's SMART2 Intelligent Disk Array Controllers. cpu-freq/ - info on CPU frequency and voltage scaling. cpu-hotplug.txt @@ -126,8 +116,6 @@ device-mapper/ - directory with info on Device Mapper. devices.txt - plain ASCII listing of all the nodes in /dev/ with major minor #'s. -digiepca.txt - - info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards. dontdiff - file containing a list of files that should never be diff'ed. driver-model/ @@ -152,14 +140,10 @@ filesystems/ - info on the vfs and the various filesystems that Linux supports. firmware_class/ - request_firmware() hotplug interface info. -floppy.txt - - notes and driver options for the floppy disk driver. frv/ - Fujitsu FR-V Linux documentation. gpio.txt - overview of GPIO (General Purpose Input/Output) access conventions. -hayes-esp.txt - - info on using the Hayes ESP serial driver. highuid.txt - notes on the change from 16 bit to 32 bit user/group IDs. timers/ @@ -186,8 +170,6 @@ io_ordering.txt - info on ordering I/O writes to memory-mapped addresses. ioctl/ - directory with documents describing various IOCTL calls. -ioctl-number.txt - - how to implement and register device/driver ioctl calls. iostats.txt - info on I/O statistics Linux kernel provides. irqflags-tracing.txt @@ -250,14 +232,10 @@ mips/ - directory with info about Linux on MIPS architecture. mono.txt - how to execute Mono-based .NET binaries with the help of BINFMT_MISC. -moxa-smartio - - file with info on installing/using Moxa multiport serial driver. mutex-design.txt - info on the generic mutex subsystem. namespaces/ - directory with various information about namespaces -nbd.txt - - info on a TCP implementation of a network block device. netlabel/ - directory with information on the NetLabel subsystem. networking/ @@ -270,8 +248,6 @@ numastat.txt - info on how to read Numa policy hit/miss statistics in sysfs. oops-tracing.txt - how to decode those nasty internal kernel error dump messages. -paride.txt - - information about the parallel port IDE subsystem. parisc/ - directory with info on using Linux on PA-RISC architecture. parport.txt @@ -292,18 +268,12 @@ preempt-locking.txt - info on locking under a preemptive kernel. prio_tree.txt - info on radix-priority-search-tree use for indexing vmas. -ramdisk.txt - - short guide on how to set up and use the RAM disk. rbtree.txt - info on what red-black trees are and what they are for. -riscom8.txt - - notes on using the RISCom/8 multi-port serial driver. robust-futex-ABI.txt - documentation of the robust futex ABI. robust-futexes.txt - a description of what robust futexes are. -rocket.txt - - info on the Comtrol RocketPort multiport serial driver. rt-mutex-design.txt - description of the RealTime mutex implementation design. rt-mutex.txt @@ -332,8 +302,6 @@ sparc/ - directory with info on using Linux on Sparc architecture. sparse.txt - info on how to obtain and use the sparse tool for typechecking. -specialix.txt - - info on hardware/driver for specialix IO8+ multiport serial card. spi/ - overview of Linux kernel Serial Peripheral Interface (SPI) support. spinlocks.txt @@ -342,14 +310,10 @@ stable_api_nonsense.txt - info on why the kernel does not have a stable in-kernel api or abi. stable_kernel_rules.txt - rules and procedures for the -stable kernel releases. -stallion.txt - - info on using the Stallion multiport serial driver. svga.txt - short guide on selecting video modes at boot via VGA BIOS. sysfs-rules.txt - How not to use sysfs. -sx.txt - - info on the Specialix SX/SI multiport serial driver. sysctl/ - directory with info on the /proc/sys/* files. sysrq.txt @@ -358,8 +322,6 @@ telephony/ - directory with info on telephony (e.g. voice over IP) support. time_interpolators.txt - info on time interpolators. -tty.txt - - guide to the locking policies of the tty layer. uml/ - directory with information about User Mode Linux. unicode.txt diff --git a/Documentation/MSI-HOWTO.txt b/Documentation/MSI-HOWTO.txt deleted file mode 100644 index 256defd7e17..00000000000 --- a/Documentation/MSI-HOWTO.txt +++ /dev/null @@ -1,509 +0,0 @@ - The MSI Driver Guide HOWTO - Tom L Nguyen tom.l.nguyen@intel.com - 10/03/2003 - Revised Feb 12, 2004 by Martine Silbermann - email: Martine.Silbermann@hp.com - Revised Jun 25, 2004 by Tom L Nguyen - -1. About this guide - -This guide describes the basics of Message Signaled Interrupts (MSI), -the advantages of using MSI over traditional interrupt mechanisms, -and how to enable your driver to use MSI or MSI-X. Also included is -a Frequently Asked Questions (FAQ) section. - -1.1 Terminology - -PCI devices can be single-function or multi-function. In either case, -when this text talks about enabling or disabling MSI on a "device -function," it is referring to one specific PCI device and function and -not to all functions on a PCI device (unless the PCI device has only -one function). - -2. Copyright 2003 Intel Corporation - -3. What is MSI/MSI-X? - -Message Signaled Interrupt (MSI), as described in the PCI Local Bus -Specification Revision 2.3 or later, is an optional feature, and a -required feature for PCI Express devices. MSI enables a device function -to request service by sending an Inbound Memory Write on its PCI bus to -the FSB as a Message Signal Interrupt transaction. Because MSI is -generated in the form of a Memory Write, all transaction conditions, -such as a Retry, Master-Abort, Target-Abort or normal completion, are -supported. - -A PCI device that supports MSI must also support pin IRQ assertion -interrupt mechanism to provide backward compatibility for systems that -do not support MSI. In systems which support MSI, the bus driver is -responsible for initializing the message address and message data of -the device function's MSI/MSI-X capability structure during device -initial configuration. - -An MSI capable device function indicates MSI support by implementing -the MSI/MSI-X capability structure in its PCI capability list. The -device function may implement both the MSI capability structure and -the MSI-X capability structure; however, the bus driver should not -enable both. - -The MSI capability structure contains Message Control register, -Message Address register and Message Data register. These registers -provide the bus driver control over MSI. The Message Control register -indicates the MSI capability supported by the device. The Message -Address register specifies the target address and the Message Data -register specifies the characteristics of the message. To request -service, the device function writes the content of the Message Data -register to the target address. The device and its software driver -are prohibited from writing to these registers. - -The MSI-X capability structure is an optional extension to MSI. It -uses an independent and separate capability structure. There are -some key advantages to implementing the MSI-X capability structure -over the MSI capability structure as described below. - - - Support a larger maximum number of vectors per function. - - - Provide the ability for system software to configure - each vector with an independent message address and message - data, specified by a table that resides in Memory Space. - - - MSI and MSI-X both support per-vector masking. Per-vector - masking is an optional extension of MSI but a required - feature for MSI-X. Per-vector masking provides the kernel the - ability to mask/unmask a single MSI while running its - interrupt service routine. If per-vector masking is - not supported, then the device driver should provide the - hardware/software synchronization to ensure that the device - generates MSI when the driver wants it to do so. - -4. Why use MSI? - -As a benefit to the simplification of board design, MSI allows board -designers to remove out-of-band interrupt routing. MSI is another -step towards a legacy-free environment. - -Due to increasing pressure on chipset and processor packages to -reduce pin count, the need for interrupt pins is expected to -diminish over time. Devices, due to pin constraints, may implement -messages to increase performance. - -PCI Express endpoints uses INTx emulation (in-band messages) instead -of IRQ pin assertion. Using INTx emulation requires interrupt -sharing among devices connected to the same node (PCI bridge) while -MSI is unique (non-shared) and does not require BIOS configuration -support. As a result, the PCI Express technology requires MSI -support for better interrupt performance. - -Using MSI enables the device functions to support two or more -vectors, which can be configured to target different CPUs to -increase scalability. - -5. Configuring a driver to use MSI/MSI-X - -By default, the kernel will not enable MSI/MSI-X on all devices that -support this capability. The CONFIG_PCI_MSI kernel option -must be selected to enable MSI/MSI-X support. - -5.1 Including MSI/MSI-X support into the kernel - -To allow MSI/MSI-X capable device drivers to selectively enable -MSI/MSI-X (using pci_enable_msi()/pci_enable_msix() as described -below), the VECTOR based scheme needs to be enabled by setting -CONFIG_PCI_MSI during kernel config. - -Since the target of the inbound message is the local APIC, providing -CONFIG_X86_LOCAL_APIC must be enabled as well as CONFIG_PCI_MSI. - -5.2 Configuring for MSI support - -Due to the non-contiguous fashion in vector assignment of the -existing Linux kernel, this version does not support multiple -messages regardless of a device function is capable of supporting -more than one vector. To enable MSI on a device function's MSI -capability structure requires a device driver to call the function -pci_enable_msi() explicitly. - -5.2.1 API pci_enable_msi - -int pci_enable_msi(struct pci_dev *dev) - -With this new API, a device driver that wants to have MSI -enabled on its device function must call this API to enable MSI. -A successful call will initialize the MSI capability structure -with ONE vector, regardless of whether a device function is -capable of supporting multiple messages. This vector replaces the -pre-assigned dev->irq with a new MSI vector. To avoid a conflict -of the new assigned vector with existing pre-assigned vector requires -a device driver to call this API before calling request_irq(). - -5.2.2 API pci_disable_msi - -void pci_disable_msi(struct pci_dev *dev) - -This API should always be used to undo the effect of pci_enable_msi() -when a device driver is unloading. This API restores dev->irq with -the pre-assigned IOAPIC vector and switches a device's interrupt -mode to PCI pin-irq assertion/INTx emulation mode. - -Note that a device driver should always call free_irq() on the MSI vector -that it has done request_irq() on before calling this API. Failure to do -so results in a BUG_ON() and a device will be left with MSI enabled and -leaks its vector. - -5.2.3 MSI mode vs. legacy mode diagram - -The below diagram shows the events which switch the interrupt -mode on the MSI-capable device function between MSI mode and -PIN-IRQ assertion mode. - - ------------ pci_enable_msi ------------------------ - | | <=============== | | - | MSI MODE | | PIN-IRQ ASSERTION MODE | - | | ===============> | | - ------------ pci_disable_msi ------------------------ - - -Figure 1. MSI Mode vs. Legacy Mode - -In Figure 1, a device operates by default in legacy mode. Legacy -in this context means PCI pin-irq assertion or PCI-Express INTx -emulation. A successful MSI request (using pci_enable_msi()) switches -a device's interrupt mode to MSI mode. A pre-assigned IOAPIC vector -stored in dev->irq will be saved by the PCI subsystem and a new -assigned MSI vector will replace dev->irq. - -To return back to its default mode, a device driver should always call -pci_disable_msi() to undo the effect of pci_enable_msi(). Note that a -device driver should always call free_irq() on the MSI vector it has -done request_irq() on before calling pci_disable_msi(). Failure to do -so results in a BUG_ON() and a device will be left with MSI enabled and -leaks its vector. Otherwise, the PCI subsystem restores a device's -dev->irq with a pre-assigned IOAPIC vector and marks the released -MSI vector as unused. - -Once being marked as unused, there is no guarantee that the PCI -subsystem will reserve this MSI vector for a device. Depending on -the availability of current PCI vector resources and the number of -MSI/MSI-X requests from other drivers, this MSI may be re-assigned. - -For the case where the PCI subsystem re-assigns this MSI vector to -another driver, a request to switch back to MSI mode may result -in being assigned a different MSI vector or a failure if no more -vectors are available. - -5.3 Configuring for MSI-X support - -Due to the ability of the system software to configure each vector of -the MSI-X capability structure with an independent message address -and message data, the non-contiguous fashion in vector assignment of -the existing Linux kernel has no impact on supporting multiple -messages on an MSI-X capable device functions. To enable MSI-X on -a device function's MSI-X capability structure requires its device -driver to call the function pci_enable_msix() explicitly. - -The function pci_enable_msix(), once invoked, enables either -all or nothing, depending on the current availability of PCI vector -resources. If the PCI vector resources are available for the number -of vectors requested by a device driver, this function will configure -the MSI-X table of the MSI-X capability structure of a device with -requested messages. To emphasize this reason, for example, a device -may be capable for supporting the maximum of 32 vectors while its -software driver usually may request 4 vectors. It is recommended -that the device driver should call this function once during the -initialization phase of the device driver. - -Unlike the function pci_enable_msi(), the function pci_enable_msix() -does not replace the pre-assigned IOAPIC dev->irq with a new MSI -vector because the PCI subsystem writes the 1:1 vector-to-entry mapping -into the field vector of each element contained in a second argument. -Note that the pre-assigned IOAPIC dev->irq is valid only if the device -operates in PIN-IRQ assertion mode. In MSI-X mode, any attempt at -using dev->irq by the device driver to request for interrupt service -may result in unpredictable behavior. - -For each MSI-X vector granted, a device driver is responsible for calling -other functions like request_irq(), enable_irq(), etc. to enable -this vector with its corresponding interrupt service handler. It is -a device driver's choice to assign all vectors with the same -interrupt service handler or each vector with a unique interrupt -service handler. - -5.3.1 Handling MMIO address space of MSI-X Table - -The PCI 3.0 specification has implementation notes that MMIO address -space for a device's MSI-X structure should be isolated so that the -software system can set different pages for controlling accesses to the -MSI-X structure. The implementation of MSI support requires the PCI -subsystem, not a device driver, to maintain full control of the MSI-X -table/MSI-X PBA (Pending Bit Array) and MMIO address space of the MSI-X -table/MSI-X PBA. A device driver should not access the MMIO address -space of the MSI-X table/MSI-X PBA. - -5.3.2 API pci_enable_msix - -int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec) - -This API enables a device driver to request the PCI subsystem -to enable MSI-X messages on its hardware device. Depending on -the availability of PCI vectors resources, the PCI subsystem enables -either all or none of the requested vectors. - -Argument 'dev' points to the device (pci_dev) structure. - -Argument 'entries' is a pointer to an array of msix_entry structs. -The number of entries is indicated in argument 'nvec'. -struct msix_entry is defined in /driver/pci/msi.h: - -struct msix_entry { - u16 vector; /* kernel uses to write alloc vector */ - u16 entry; /* driver uses to specify entry */ -}; - -A device driver is responsible for initializing the field 'entry' of -each element with a unique entry supported by MSI-X table. Otherwise, --EINVAL will be returned as a result. A successful return of zero -indicates the PCI subsystem completed initializing each of the requested -entries of the MSI-X table with message address and message data. -Last but not least, the PCI subsystem will write the 1:1 -vector-to-entry mapping into the field 'vector' of each element. A -device driver is responsible for keeping track of allocated MSI-X -vectors in its internal data structure. - -A return of zero indicates that the number of MSI-X vectors was -successfully allocated. A return of greater than zero indicates -MSI-X vector shortage. Or a return of less than zero indicates -a failure. This failure may be a result of duplicate entries -specified in second argument, or a result of no available vector, -or a result of failing to initialize MSI-X table entries. - -5.3.3 API pci_disable_msix - -void pci_disable_msix(struct pci_dev *dev) - -This API should always be used to undo the effect of pci_enable_msix() -when a device driver is unloading. Note that a device driver should -always call free_irq() on all MSI-X vectors it has done request_irq() -on before calling this API. Failure to do so results in a BUG_ON() and -a device will be left with MSI-X enabled and leaks its vectors. - -5.3.4 MSI-X mode vs. legacy mode diagram - -The below diagram shows the events which switch the interrupt -mode on the MSI-X capable device function between MSI-X mode and -PIN-IRQ assertion mode (legacy). - - ------------ pci_enable_msix(,,n) ------------------------ - | | <=============== | | - | MSI-X MODE | | PIN-IRQ ASSERTION MODE | - | | ===============> | | - ------------ pci_disable_msix ------------------------ - -Figure 2. MSI-X Mode vs. Legacy Mode - -In Figure 2, a device operates by default in legacy mode. A -successful MSI-X request (using pci_enable_msix()) switches a -device's interrupt mode to MSI-X mode. A pre-assigned IOAPIC vector -stored in dev->irq will be saved by the PCI subsystem; however, -unlike MSI mode, the PCI subsystem will not replace dev->irq with -assigned MSI-X vector because the PCI subsystem already writes the 1:1 -vector-to-entry mapping into the field 'vector' of each element -specified in second argument. - -To return back to its default mode, a device driver should always call -pci_disable_msix() to undo the effect of pci_enable_msix(). Note that -a device driver should always call free_irq() on all MSI-X vectors it -has done request_irq() on before calling pci_disable_msix(). Failure -to do so results in a BUG_ON() and a device will be left with MSI-X -enabled and leaks its vectors. Otherwise, the PCI subsystem switches a -device function's interrupt mode from MSI-X mode to legacy mode and -marks all allocated MSI-X vectors as unused. - -Once being marked as unused, there is no guarantee that the PCI -subsystem will reserve these MSI-X vectors for a device. Depending on -the availability of current PCI vector resources and the number of -MSI/MSI-X requests from other drivers, these MSI-X vectors may be -re-assigned. - -For the case where the PCI subsystem re-assigned these MSI-X vectors -to other drivers, a request to switch back to MSI-X mode may result -being assigned with another set of MSI-X vectors or a failure if no -more vectors are available. - -5.4 Handling function implementing both MSI and MSI-X capabilities - -For the case where a function implements both MSI and MSI-X -capabilities, the PCI subsystem enables a device to run either in MSI -mode or MSI-X mode but not both. A device driver determines whether it -wants MSI or MSI-X enabled on its hardware device. Once a device -driver requests for MSI, for example, it is prohibited from requesting -MSI-X; in other words, a device driver is not permitted to ping-pong -between MSI mod MSI-X mode during a run-time. - -5.5 Hardware requirements for MSI/MSI-X support - -MSI/MSI-X support requires support from both system hardware and -individual hardware device functions. - -5.5.1 Required x86 hardware support - -Since the target of MSI address is the local APIC CPU, enabling -MSI/MSI-X support in the Linux kernel is dependent on whether existing -system hardware supports local APIC. Users should verify that their -system supports local APIC operation by testing that it runs when -CONFIG_X86_LOCAL_APIC=y. - -In SMP environment, CONFIG_X86_LOCAL_APIC is automatically set; -however, in UP environment, users must manually set -CONFIG_X86_LOCAL_APIC. Once CONFIG_X86_LOCAL_APIC=y, setting -CONFIG_PCI_MSI enables the VECTOR based scheme and the option for -MSI-capable device drivers to selectively enable MSI/MSI-X. - -Note that CONFIG_X86_IO_APIC setting is irrelevant because MSI/MSI-X -vector is allocated new during runtime and MSI/MSI-X support does not -depend on BIOS support. This key independency enables MSI/MSI-X -support on future IOxAPIC free platforms. - -5.5.2 Device hardware support - -The hardware device function supports MSI by indicating the -MSI/MSI-X capability structure on its PCI capability list. By -default, this capability structure will not be initialized by -the kernel to enable MSI during the system boot. In other words, -the device function is running on its default pin assertion mode. -Note that in many cases the hardware supporting MSI have bugs, -which may result in system hangs. The software driver of specific -MSI-capable hardware is responsible for deciding whether to call -pci_enable_msi or not. A return of zero indicates the kernel -successfully initialized the MSI/MSI-X capability structure of the -device function. The device function is now running on MSI/MSI-X mode. - -5.6 How to tell whether MSI/MSI-X is enabled on device function - -At the driver level, a return of zero from the function call of -pci_enable_msi()/pci_enable_msix() indicates to a device driver that -its device function is initialized successfully and ready to run in -MSI/MSI-X mode. - -At the user level, users can use the command 'cat /proc/interrupts' -to display the vectors allocated for devices and their interrupt -MSI/MSI-X modes ("PCI-MSI"/"PCI-MSI-X"). Below shows MSI mode is -enabled on a SCSI Adaptec 39320D Ultra320 controller. - - CPU0 CPU1 - 0: 324639 0 IO-APIC-edge timer - 1: 1186 0 IO-APIC-edge i8042 - 2: 0 0 XT-PIC cascade - 12: 2797 0 IO-APIC-edge i8042 - 14: 6543 0 IO-APIC-edge ide0 - 15: 1 0 IO-APIC-edge ide1 -169: 0 0 IO-APIC-level uhci-hcd -185: 0 0 IO-APIC-level uhci-hcd -193: 138 10 PCI-MSI aic79xx -201: 30 0 PCI-MSI aic79xx -225: 30 0 IO-APIC-level aic7xxx -233: 30 0 IO-APIC-level aic7xxx -NMI: 0 0 -LOC: 324553 325068 -ERR: 0 -MIS: 0 - -6. MSI quirks - -Several PCI chipsets or devices are known to not support MSI. -The PCI stack provides 3 possible levels of MSI disabling: -* on a single device -* on all devices behind a specific bridge -* globally - -6.1. Disabling MSI on a single device - -Under some circumstances it might be required to disable MSI on a -single device. This may be achieved by either not calling pci_enable_msi() -or all, or setting the pci_dev->no_msi flag before (most of the time -in a quirk). - -6.2. Disabling MSI below a bridge - -The vast majority of MSI quirks are required by PCI bridges not -being able to route MSI between busses. In this case, MSI have to be -disabled on all devices behind this bridge. It is achieves by setting -the PCI_BUS_FLAGS_NO_MSI flag in the pci_bus->bus_flags of the bridge -subordinate bus. There is no need to set the same flag on bridges that -are below the broken bridge. When pci_enable_msi() is called to enable -MSI on a device, pci_msi_supported() takes care of checking the NO_MSI -flag in all parent busses of the device. - -Some bridges actually support dynamic MSI support enabling/disabling -by changing some bits in their PCI configuration space (especially -the Hypertransport chipsets such as the nVidia nForce and Serverworks -HT2000). It may then be required to update the NO_MSI flag on the -corresponding devices in the sysfs hierarchy. To enable MSI support -on device "0000:00:0e", do: - - echo 1 > /sys/bus/pci/devices/0000:00:0e/msi_bus - -To disable MSI support, echo 0 instead of 1. Note that it should be -used with caution since changing this value might break interrupts. - -6.3. Disabling MSI globally - -Some extreme cases may require to disable MSI globally on the system. -For now, the only known case is a Serverworks PCI-X chipsets (MSI are -not supported on several busses that are not all connected to the -chipset in the Linux PCI hierarchy). In the vast majority of other -cases, disabling only behind a specific bridge is enough. - -For debugging purpose, the user may also pass pci=nomsi on the kernel -command-line to explicitly disable MSI globally. But, once the appro- -priate quirks are added to the kernel, this option should not be -required anymore. - -6.4. Finding why MSI cannot be enabled on a device - -Assuming that MSI are not enabled on a device, you should look at -dmesg to find messages that quirks may output when disabling MSI -on some devices, some bridges or even globally. -Then, lspci -t gives the list of bridges above a device. Reading -/sys/bus/pci/devices/0000:00:0e/msi_bus will tell you whether MSI -are enabled (1) or disabled (0). In 0 is found in a single bridge -msi_bus file above the device, MSI cannot be enabled. - -7. FAQ - -Q1. Are there any limitations on using the MSI? - -A1. If the PCI device supports MSI and conforms to the -specification and the platform supports the APIC local bus, -then using MSI should work. - -Q2. Will it work on all the Pentium processors (P3, P4, Xeon, -AMD processors)? In P3 IPI's are transmitted on the APIC local -bus and in P4 and Xeon they are transmitted on the system -bus. Are there any implications with this? - -A2. MSI support enables a PCI device sending an inbound -memory write (0xfeexxxxx as target address) on its PCI bus -directly to the FSB. Since the message address has a -redirection hint bit cleared, it should work. - -Q3. The target address 0xfeexxxxx will be translated by the -Host Bridge into an interrupt message. Are there any -limitations on the chipsets such as Intel 8xx, Intel e7xxx, -or VIA? - -A3. If these chipsets support an inbound memory write with -target address set as 0xfeexxxxx, as conformed to PCI -specification 2.3 or latest, then it should work. - -Q4. From the driver point of view, if the MSI is lost because -of errors occurring during inbound memory write, then it may -wait forever. Is there a mechanism for it to recover? - -A4. Since the target of the transaction is an inbound memory -write, all transaction termination conditions (Retry, -Master-Abort, Target-Abort, or normal completion) are -supported. A device sending an MSI must abide by all the PCI -rules and conditions regarding that inbound memory write. So, -if a retry is signaled it must retry, etc... We believe that -the recommendation for Abort is also a retry (refer to PCI -specification 2.3 or latest). diff --git a/Documentation/PCI/00-INDEX b/Documentation/PCI/00-INDEX index 49f43946c6b..812b17fe3ed 100644 --- a/Documentation/PCI/00-INDEX +++ b/Documentation/PCI/00-INDEX @@ -1,5 +1,7 @@ 00-INDEX - this file +MSI-HOWTO.txt + - the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ. PCI-DMA-mapping.txt - info for PCI drivers using DMA portably across all platforms PCIEBUS-HOWTO.txt diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt new file mode 100644 index 00000000000..256defd7e17 --- /dev/null +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -0,0 +1,509 @@ + The MSI Driver Guide HOWTO + Tom L Nguyen tom.l.nguyen@intel.com + 10/03/2003 + Revised Feb 12, 2004 by Martine Silbermann + email: Martine.Silbermann@hp.com + Revised Jun 25, 2004 by Tom L Nguyen + +1. About this guide + +This guide describes the basics of Message Signaled Interrupts (MSI), +the advantages of using MSI over traditional interrupt mechanisms, +and how to enable your driver to use MSI or MSI-X. Also included is +a Frequently Asked Questions (FAQ) section. + +1.1 Terminology + +PCI devices can be single-function or multi-function. In either case, +when this text talks about enabling or disabling MSI on a "device +function," it is referring to one specific PCI device and function and +not to all functions on a PCI device (unless the PCI device has only +one function). + +2. Copyright 2003 Intel Corporation + +3. What is MSI/MSI-X? + +Message Signaled Interrupt (MSI), as described in the PCI Local Bus +Specification Revision 2.3 or later, is an optional feature, and a +required feature for PCI Express devices. MSI enables a device function +to request service by sending an Inbound Memory Write on its PCI bus to +the FSB as a Message Signal Interrupt transaction. Because MSI is +generated in the form of a Memory Write, all transaction conditions, +such as a Retry, Master-Abort, Target-Abort or normal completion, are +supported. + +A PCI device that supports MSI must also support pin IRQ assertion +interrupt mechanism to provide backward compatibility for systems that +do not support MSI. In systems which support MSI, the bus driver is +responsible for initializing the message address and message data of +the device function's MSI/MSI-X capability structure during device +initial configuration. + +An MSI capable device function indicates MSI support by implementing +the MSI/MSI-X capability structure in its PCI capability list. The +device function may implement both the MSI capability structure and +the MSI-X capability structure; however, the bus driver should not +enable both. + +The MSI capability structure contains Message Control register, +Message Address register and Message Data register. These registers +provide the bus driver control over MSI. The Message Control register +indicates the MSI capability supported by the device. The Message +Address register specifies the target address and the Message Data +register specifies the characteristics of the message. To request +service, the device function writes the content of the Message Data +register to the target address. The device and its software driver +are prohibited from writing to these registers. + +The MSI-X capability structure is an optional extension to MSI. It +uses an independent and separate capability structure. There are +some key advantages to implementing the MSI-X capability structure +over the MSI capability structure as described below. + + - Support a larger maximum number of vectors per function. + + - Provide the ability for system software to configure + each vector with an independent message address and message + data, specified by a table that resides in Memory Space. + + - MSI and MSI-X both support per-vector masking. Per-vector + masking is an optional extension of MSI but a required + feature for MSI-X. Per-vector masking provides the kernel the + ability to mask/unmask a single MSI while running its + interrupt service routine. If per-vector masking is + not supported, then the device driver should provide the + hardware/software synchronization to ensure that the device + generates MSI when the driver wants it to do so. + +4. Why use MSI? + +As a benefit to the simplification of board design, MSI allows board +designers to remove out-of-band interrupt routing. MSI is another +step towards a legacy-free environment. + +Due to increasing pressure on chipset and processor packages to +reduce pin count, the need for interrupt pins is expected to +diminish over time. Devices, due to pin constraints, may implement +messages to increase performance. + +PCI Express endpoints uses INTx emulation (in-band messages) instead +of IRQ pin assertion. Using INTx emulation requires interrupt +sharing among devices connected to the same node (PCI bridge) while +MSI is unique (non-shared) and does not require BIOS configuration +support. As a result, the PCI Express technology requires MSI +support for better interrupt performance. + +Using MSI enables the device functions to support two or more +vectors, which can be configured to target different CPUs to +increase scalability. + +5. Configuring a driver to use MSI/MSI-X + +By default, the kernel will not enable MSI/MSI-X on all devices that +support this capability. The CONFIG_PCI_MSI kernel option +must be selected to enable MSI/MSI-X support. + +5.1 Including MSI/MSI-X support into the kernel + +To allow MSI/MSI-X capable device drivers to selectively enable +MSI/MSI-X (using pci_enable_msi()/pci_enable_msix() as described +below), the VECTOR based scheme needs to be enabled by setting +CONFIG_PCI_MSI during kernel config. + +Since the target of the inbound message is the local APIC, providing +CONFIG_X86_LOCAL_APIC must be enabled as well as CONFIG_PCI_MSI. + +5.2 Configuring for MSI support + +Due to the non-contiguous fashion in vector assignment of the +existing Linux kernel, this version does not support multiple +messages regardless of a device function is capable of supporting +more than one vector. To enable MSI on a device function's MSI +capability structure requires a device driver to call the function +pci_enable_msi() explicitly. + +5.2.1 API pci_enable_msi + +int pci_enable_msi(struct pci_dev *dev) + +With this new API, a device driver that wants to have MSI +enabled on its device function must call this API to enable MSI. +A successful call will initialize the MSI capability structure +with ONE vector, regardless of whether a device function is +capable of supporting multiple messages. This vector replaces the +pre-assigned dev->irq with a new MSI vector. To avoid a conflict +of the new assigned vector with existing pre-assigned vector requires +a device driver to call this API before calling request_irq(). + +5.2.2 API pci_disable_msi + +void pci_disable_msi(struct pci_dev *dev) + +This API should always be used to undo the effect of pci_enable_msi() +when a device driver is unloading. This API restores dev->irq with +the pre-assigned IOAPIC vector and switches a device's interrupt +mode to PCI pin-irq assertion/INTx emulation mode. + +Note that a device driver should always call free_irq() on the MSI vector +that it has done request_irq() on before calling this API. Failure to do +so results in a BUG_ON() and a device will be left with MSI enabled and +leaks its vector. + +5.2.3 MSI mode vs. legacy mode diagram + +The below diagram shows the events which switch the interrupt +mode on the MSI-capable device function between MSI mode and +PIN-IRQ assertion mode. + + ------------ pci_enable_msi ------------------------ + | | <=============== | | + | MSI MODE | | PIN-IRQ ASSERTION MODE | + | | ===============> | | + ------------ pci_disable_msi ------------------------ + + +Figure 1. MSI Mode vs. Legacy Mode + +In Figure 1, a device operates by default in legacy mode. Legacy +in this context means PCI pin-irq assertion or PCI-Express INTx +emulation. A successful MSI request (using pci_enable_msi()) switches +a device's interrupt mode to MSI mode. A pre-assigned IOAPIC vector +stored in dev->irq will be saved by the PCI subsystem and a new +assigned MSI vector will replace dev->irq. + +To return back to its default mode, a device driver should always call +pci_disable_msi() to undo the effect of pci_enable_msi(). Note that a +device driver should always call free_irq() on the MSI vector it has +done request_irq() on before calling pci_disable_msi(). Failure to do +so results in a BUG_ON() and a device will be left with MSI enabled and +leaks its vector. Otherwise, the PCI subsystem restores a device's +dev->irq with a pre-assigned IOAPIC vector and marks the released +MSI vector as unused. + +Once being marked as unused, there is no guarantee that the PCI +subsystem will reserve this MSI vector for a device. Depending on +the availability of current PCI vector resources and the number of +MSI/MSI-X requests from other drivers, this MSI may be re-assigned. + +For the case where the PCI subsystem re-assigns this MSI vector to +another driver, a request to switch back to MSI mode may result +in being assigned a different MSI vector or a failure if no more +vectors are available. + +5.3 Configuring for MSI-X support + +Due to the ability of the system software to configure each vector of +the MSI-X capability structure with an independent message address +and message data, the non-contiguous fashion in vector assignment of +the existing Linux kernel has no impact on supporting multiple +messages on an MSI-X capable device functions. To enable MSI-X on +a device function's MSI-X capability structure requires its device +driver to call the function pci_enable_msix() explicitly. + +The function pci_enable_msix(), once invoked, enables either +all or nothing, depending on the current availability of PCI vector +resources. If the PCI vector resources are available for the number +of vectors requested by a device driver, this function will configure +the MSI-X table of the MSI-X capability structure of a device with +requested messages. To emphasize this reason, for example, a device +may be capable for supporting the maximum of 32 vectors while its +software driver usually may request 4 vectors. It is recommended +that the device driver should call this function once during the +initialization phase of the device driver. + +Unlike the function pci_enable_msi(), the function pci_enable_msix() +does not replace the pre-assigned IOAPIC dev->irq with a new MSI +vector because the PCI subsystem writes the 1:1 vector-to-entry mapping +into the field vector of each element contained in a second argument. +Note that the pre-assigned IOAPIC dev->irq is valid only if the device +operates in PIN-IRQ assertion mode. In MSI-X mode, any attempt at +using dev->irq by the device driver to request for interrupt service +may result in unpredictable behavior. + +For each MSI-X vector granted, a device driver is responsible for calling +other functions like request_irq(), enable_irq(), etc. to enable +this vector with its corresponding interrupt service handler. It is +a device driver's choice to assign all vectors with the same +interrupt service handler or each vector with a unique interrupt +service handler. + +5.3.1 Handling MMIO address space of MSI-X Table + +The PCI 3.0 specification has implementation notes that MMIO address +space for a device's MSI-X structure should be isolated so that the +software system can set different pages for controlling accesses to the +MSI-X structure. The implementation of MSI support requires the PCI +subsystem, not a device driver, to maintain full control of the MSI-X +table/MSI-X PBA (Pending Bit Array) and MMIO address space of the MSI-X +table/MSI-X PBA. A device driver should not access the MMIO address +space of the MSI-X table/MSI-X PBA. + +5.3.2 API pci_enable_msix + +int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec) + +This API enables a device driver to request the PCI subsystem +to enable MSI-X messages on its hardware device. Depending on +the availability of PCI vectors resources, the PCI subsystem enables +either all or none of the requested vectors. + +Argument 'dev' points to the device (pci_dev) structure. + +Argument 'entries' is a pointer to an array of msix_entry structs. +The number of entries is indicated in argument 'nvec'. +struct msix_entry is defined in /driver/pci/msi.h: + +struct msix_entry { + u16 vector; /* kernel uses to write alloc vector */ + u16 entry; /* driver uses to specify entry */ +}; + +A device driver is responsible for initializing the field 'entry' of +each element with a unique entry supported by MSI-X table. Otherwise, +-EINVAL will be returned as a result. A successful return of zero +indicates the PCI subsystem completed initializing each of the requested +entries of the MSI-X table with message address and message data. +Last but not least, the PCI subsystem will write the 1:1 +vector-to-entry mapping into the field 'vector' of each element. A +device driver is responsible for keeping track of allocated MSI-X +vectors in its internal data structure. + +A return of zero indicates that the number of MSI-X vectors was +successfully allocated. A return of greater than zero indicates +MSI-X vector shortage. Or a return of less than zero indicates +a failure. This failure may be a result of duplicate entries +specified in second argument, or a result of no available vector, +or a result of failing to initialize MSI-X table entries. + +5.3.3 API pci_disable_msix + +void pci_disable_msix(struct pci_dev *dev) + +This API should always be used to undo the effect of pci_enable_msix() +when a device driver is unloading. Note that a device driver should +always call free_irq() on all MSI-X vectors it has done request_irq() +on before calling this API. Failure to do so results in a BUG_ON() and +a device will be left with MSI-X enabled and leaks its vectors. + +5.3.4 MSI-X mode vs. legacy mode diagram + +The below diagram shows the events which switch the interrupt +mode on the MSI-X capable device function between MSI-X mode and +PIN-IRQ assertion mode (legacy). + + ------------ pci_enable_msix(,,n) ------------------------ + | | <=============== | | + | MSI-X MODE | | PIN-IRQ ASSERTION MODE | + | | ===============> | | + ------------ pci_disable_msix ------------------------ + +Figure 2. MSI-X Mode vs. Legacy Mode + +In Figure 2, a device operates by default in legacy mode. A +successful MSI-X request (using pci_enable_msix()) switches a +device's interrupt mode to MSI-X mode. A pre-assigned IOAPIC vector +stored in dev->irq will be saved by the PCI subsystem; however, +unlike MSI mode, the PCI subsystem will not replace dev->irq with +assigned MSI-X vector because the PCI subsystem already writes the 1:1 +vector-to-entry mapping into the field 'vector' of each element +specified in second argument. + +To return back to its default mode, a device driver should always call +pci_disable_msix() to undo the effect of pci_enable_msix(). Note that +a device driver should always call free_irq() on all MSI-X vectors it +has done request_irq() on before calling pci_disable_msix(). Failure +to do so results in a BUG_ON() and a device will be left with MSI-X +enabled and leaks its vectors. Otherwise, the PCI subsystem switches a +device function's interrupt mode from MSI-X mode to legacy mode and +marks all allocated MSI-X vectors as unused. + +Once being marked as unused, there is no guarantee that the PCI +subsystem will reserve these MSI-X vectors for a device. Depending on +the availability of current PCI vector resources and the number of +MSI/MSI-X requests from other drivers, these MSI-X vectors may be +re-assigned. + +For the case where the PCI subsystem re-assigned these MSI-X vectors +to other drivers, a request to switch back to MSI-X mode may result +being assigned with another set of MSI-X vectors or a failure if no +more vectors are available. + +5.4 Handling function implementing both MSI and MSI-X capabilities + +For the case where a function implements both MSI and MSI-X +capabilities, the PCI subsystem enables a device to run either in MSI +mode or MSI-X mode but not both. A device driver determines whether it +wants MSI or MSI-X enabled on its hardware device. Once a device +driver requests for MSI, for example, it is prohibited from requesting +MSI-X; in other words, a device driver is not permitted to ping-pong +between MSI mod MSI-X mode during a run-time. + +5.5 Hardware requirements for MSI/MSI-X support + +MSI/MSI-X support requires support from both system hardware and +individual hardware device functions. + +5.5.1 Required x86 hardware support + +Since the target of MSI address is the local APIC CPU, enabling +MSI/MSI-X support in the Linux kernel is dependent on whether existing +system hardware supports local APIC. Users should verify that their +system supports local APIC operation by testing that it runs when +CONFIG_X86_LOCAL_APIC=y. + +In SMP environment, CONFIG_X86_LOCAL_APIC is automatically set; +however, in UP environment, users must manually set +CONFIG_X86_LOCAL_APIC. Once CONFIG_X86_LOCAL_APIC=y, setting +CONFIG_PCI_MSI enables the VECTOR based scheme and the option for +MSI-capable device drivers to selectively enable MSI/MSI-X. + +Note that CONFIG_X86_IO_APIC setting is irrelevant because MSI/MSI-X +vector is allocated new during runtime and MSI/MSI-X support does not +depend on BIOS support. This key independency enables MSI/MSI-X +support on future IOxAPIC free platforms. + +5.5.2 Device hardware support + +The hardware device function supports MSI by indicating the +MSI/MSI-X capability structure on its PCI capability list. By +default, this capability structure will not be initialized by +the kernel to enable MSI during the system boot. In other words, +the device function is running on its default pin assertion mode. +Note that in many cases the hardware supporting MSI have bugs, +which may result in system hangs. The software driver of specific +MSI-capable hardware is responsible for deciding whether to call +pci_enable_msi or not. A return of zero indicates the kernel +successfully initialized the MSI/MSI-X capability structure of the +device function. The device function is now running on MSI/MSI-X mode. + +5.6 How to tell whether MSI/MSI-X is enabled on device function + +At the driver level, a return of zero from the function call of +pci_enable_msi()/pci_enable_msix() indicates to a device driver that +its device function is initialized successfully and ready to run in +MSI/MSI-X mode. + +At the user level, users can use the command 'cat /proc/interrupts' +to display the vectors allocated for devices and their interrupt +MSI/MSI-X modes ("PCI-MSI"/"PCI-MSI-X"). Below shows MSI mode is +enabled on a SCSI Adaptec 39320D Ultra320 controller. + + CPU0 CPU1 + 0: 324639 0 IO-APIC-edge timer + 1: 1186 0 IO-APIC-edge i8042 + 2: 0 0 XT-PIC cascade + 12: 2797 0 IO-APIC-edge i8042 + 14: 6543 0 IO-APIC-edge ide0 + 15: 1 0 IO-APIC-edge ide1 +169: 0 0 IO-APIC-level uhci-hcd +185: 0 0 IO-APIC-level uhci-hcd +193: 138 10 PCI-MSI aic79xx +201: 30 0 PCI-MSI aic79xx +225: 30 0 IO-APIC-level aic7xxx +233: 30 0 IO-APIC-level aic7xxx +NMI: 0 0 +LOC: 324553 325068 +ERR: 0 +MIS: 0 + +6. MSI quirks + +Several PCI chipsets or devices are known to not support MSI. +The PCI stack provides 3 possible levels of MSI disabling: +* on a single device +* on all devices behind a specific bridge +* globally + +6.1. Disabling MSI on a single device + +Under some circumstances it might be required to disable MSI on a +single device. This may be achieved by either not calling pci_enable_msi() +or all, or setting the pci_dev->no_msi flag before (most of the time +in a quirk). + +6.2. Disabling MSI below a bridge + +The vast majority of MSI quirks are required by PCI bridges not +being able to route MSI between busses. In this case, MSI have to be +disabled on all devices behind this bridge. It is achieves by setting +the PCI_BUS_FLAGS_NO_MSI flag in the pci_bus->bus_flags of the bridge +subordinate bus. There is no need to set the same flag on bridges that +are below the broken bridge. When pci_enable_msi() is called to enable +MSI on a device, pci_msi_supported() takes care of checking the NO_MSI +flag in all parent busses of the device. + +Some bridges actually support dynamic MSI support enabling/disabling +by changing some bits in their PCI configuration space (especially +the Hypertransport chipsets such as the nVidia nForce and Serverworks +HT2000). It may then be required to update the NO_MSI flag on the +corresponding devices in the sysfs hierarchy. To enable MSI support +on device "0000:00:0e", do: + + echo 1 > /sys/bus/pci/devices/0000:00:0e/msi_bus + +To disable MSI support, echo 0 instead of 1. Note that it should be +used with caution since changing this value might break interrupts. + +6.3. Disabling MSI globally + +Some extreme cases may require to disable MSI globally on the system. +For now, the only known case is a Serverworks PCI-X chipsets (MSI are +not supported on several busses that are not all connected to the +chipset in the Linux PCI hierarchy). In the vast majority of other +cases, disabling only behind a specific bridge is enough. + +For debugging purpose, the user may also pass pci=nomsi on the kernel +command-line to explicitly disable MSI globally. But, once the appro- +priate quirks are added to the kernel, this option should not be +required anymore. + +6.4. Finding why MSI cannot be enabled on a device + +Assuming that MSI are not enabled on a device, you should look at +dmesg to find messages that quirks may output when disabling MSI +on some devices, some bridges or even globally. +Then, lspci -t gives the list of bridges above a device. Reading +/sys/bus/pci/devices/0000:00:0e/msi_bus will tell you whether MSI +are enabled (1) or disabled (0). In 0 is found in a single bridge +msi_bus file above the device, MSI cannot be enabled. + +7. FAQ + +Q1. Are there any limitations on using the MSI? + +A1. If the PCI device supports MSI and conforms to the +specification and the platform supports the APIC local bus, +then using MSI should work. + +Q2. Will it work on all the Pentium processors (P3, P4, Xeon, +AMD processors)? In P3 IPI's are transmitted on the APIC local +bus and in P4 and Xeon they are transmitted on the system +bus. Are there any implications with this? + +A2. MSI support enables a PCI device sending an inbound +memory write (0xfeexxxxx as target address) on its PCI bus +directly to the FSB. Since the message address has a +redirection hint bit cleared, it should work. + +Q3. The target address 0xfeexxxxx will be translated by the +Host Bridge into an interrupt message. Are there any +limitations on the chipsets such as Intel 8xx, Intel e7xxx, +or VIA? + +A3. If these chipsets support an inbound memory write with +target address set as 0xfeexxxxx, as conformed to PCI +specification 2.3 or latest, then it should work. + +Q4. From the driver point of view, if the MSI is lost because +of errors occurring during inbound memory write, then it may +wait forever. Is there a mechanism for it to recover? + +A4. Since the target of the transaction is an inbound memory +write, all transaction termination conditions (Retry, +Master-Abort, Target-Abort, or normal completion) are +supported. A device sending an MSI must abide by all the PCI +rules and conditions regarding that inbound memory write. So, +if a retry is signaled it must retry, etc... We believe that +the recommendation for Abort is also a retry (refer to PCI +specification 2.3 or latest). diff --git a/Documentation/README.DAC960 b/Documentation/README.DAC960 deleted file mode 100644 index 0e8f618ab53..00000000000 --- a/Documentation/README.DAC960 +++ /dev/null @@ -1,756 +0,0 @@ - Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers - - Version 2.2.11 for Linux 2.2.19 - Version 2.4.11 for Linux 2.4.12 - - PRODUCTION RELEASE - - 11 October 2001 - - Leonard N. Zubkoff - Dandelion Digital - lnz@dandelion.com - - Copyright 1998-2001 by Leonard N. Zubkoff - - - INTRODUCTION - -Mylex, Inc. designs and manufactures a variety of high performance PCI RAID -controllers. Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont, -California 94555, USA and can be reached at 510.796.6100 or on the World Wide -Web at http://www.mylex.com. Mylex Technical Support can be reached by -electronic mail at mylexsup@us.ibm.com, by voice at 510.608.2400, or by FAX at -510.745.7715. Contact information for offices in Europe and Japan is available -on their Web site. - -The latest information on Linux support for DAC960 PCI RAID Controllers, as -well as the most recent release of this driver, will always be available from -my Linux Home Page at URL "http://www.dandelion.com/Linux/". The Linux DAC960 -driver supports all current Mylex PCI RAID controllers including the new -eXtremeRAID 2000/3000 and AcceleRAID 352/170/160 models which have an entirely -new firmware interface from the older eXtremeRAID 1100, AcceleRAID 150/200/250, -and DAC960PJ/PG/PU/PD/PL. See below for a complete controller list as well as -minimum firmware version requirements. For simplicity, in most places this -documentation refers to DAC960 generically rather than explicitly listing all -the supported models. - -Driver bug reports should be sent via electronic mail to "lnz@dandelion.com". -Please include with the bug report the complete configuration messages reported -by the driver at startup, along with any subsequent system messages relevant to -the controller's operation, and a detailed description of your system's -hardware configuration. Driver bugs are actually quite rare; if you encounter -problems with disks being marked offline, for example, please contact Mylex -Technical Support as the problem is related to the hardware configuration -rather than the Linux driver. - -Please consult the RAID controller documentation for detailed information -regarding installation and configuration of the controllers. This document -primarily provides information specific to the Linux support. - - - DRIVER FEATURES - -The DAC960 RAID controllers are supported solely as high performance RAID -controllers, not as interfaces to arbitrary SCSI devices. The Linux DAC960 -driver operates at the block device level, the same level as the SCSI and IDE -drivers. Unlike other RAID controllers currently supported on Linux, the -DAC960 driver is not dependent on the SCSI subsystem, and hence avoids all the -complexity and unnecessary code that would be associated with an implementation -as a SCSI driver. The DAC960 driver is designed for as high a performance as -possible with no compromises or extra code for compatibility with lower -performance devices. The DAC960 driver includes extensive error logging and -online configuration management capabilities. Except for initial configuration -of the controller and adding new disk drives, most everything can be handled -from Linux while the system is operational. - -The DAC960 driver is architected to support up to 8 controllers per system. -Each DAC960 parallel SCSI controller can support up to 15 disk drives per -channel, for a maximum of 60 drives on a four channel controller; the fibre -channel eXtremeRAID 3000 controller supports up to 125 disk drives per loop for -a total of 250 drives. The drives installed on a controller are divided into -one or more "Drive Groups", and then each Drive Group is subdivided further -into 1 to 32 "Logical Drives". Each Logical Drive has a specific RAID Level -and caching policy associated with it, and it appears to Linux as a single -block device. Logical Drives are further subdivided into up to 7 partitions -through the normal Linux and PC disk partitioning schemes. Logical Drives are -also known as "System Drives", and Drive Groups are also called "Packs". Both -terms are in use in the Mylex documentation; I have chosen to standardize on -the more generic "Logical Drive" and "Drive Group". - -DAC960 RAID disk devices are named in the style of the obsolete Device File -System (DEVFS). The device corresponding to Logical Drive D on Controller C -is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1 -through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on -Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI -disks the device names will not change in the event of a disk drive failure. -The DAC960 driver is assigned major numbers 48 - 55 with one major number per -controller. The 8 bits of minor number are divided into 5 bits for the Logical -Drive and 3 bits for the partition. - - - SUPPORTED DAC960/AcceleRAID/eXtremeRAID PCI RAID CONTROLLERS - -The following list comprises the supported DAC960, AcceleRAID, and eXtremeRAID -PCI RAID Controllers as of the date of this document. It is recommended that -anyone purchasing a Mylex PCI RAID Controller not in the following table -contact the author beforehand to verify that it is or will be supported. - -eXtremeRAID 3000 - 1 Wide Ultra-2/LVD SCSI channel - 2 External Fibre FC-AL channels - 233MHz StrongARM SA 110 Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 32MB/64MB ECC SDRAM Memory - -eXtremeRAID 2000 - 4 Wide Ultra-160 LVD SCSI channels - 233MHz StrongARM SA 110 Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 32MB/64MB ECC SDRAM Memory - -AcceleRAID 352 - 2 Wide Ultra-160 LVD SCSI channels - 100MHz Intel i960RN RISC Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 32MB/64MB ECC SDRAM Memory - -AcceleRAID 170 - 1 Wide Ultra-160 LVD SCSI channel - 100MHz Intel i960RM RISC Processor - 16MB/32MB/64MB ECC SDRAM Memory - -AcceleRAID 160 (AcceleRAID 170LP) - 1 Wide Ultra-160 LVD SCSI channel - 100MHz Intel i960RS RISC Processor - Built in 16M ECC SDRAM Memory - PCI Low Profile Form Factor - fit for 2U height - -eXtremeRAID 1100 (DAC1164P) - 3 Wide Ultra-2/LVD SCSI channels - 233MHz StrongARM SA 110 Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 16MB/32MB/64MB Parity SDRAM Memory with Battery Backup - -AcceleRAID 250 (DAC960PTL1) - Uses onboard Symbios SCSI chips on certain motherboards - Also includes one onboard Wide Ultra-2/LVD SCSI Channel - 66MHz Intel i960RD RISC Processor - 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory - -AcceleRAID 200 (DAC960PTL0) - Uses onboard Symbios SCSI chips on certain motherboards - Includes no onboard SCSI Channels - 66MHz Intel i960RD RISC Processor - 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory - -AcceleRAID 150 (DAC960PRL) - Uses onboard Symbios SCSI chips on certain motherboards - Also includes one onboard Wide Ultra-2/LVD SCSI Channel - 33MHz Intel i960RP RISC Processor - 4MB Parity EDO Memory - -DAC960PJ 1/2/3 Wide Ultra SCSI-3 Channels - 66MHz Intel i960RD RISC Processor - 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory - -DAC960PG 1/2/3 Wide Ultra SCSI-3 Channels - 33MHz Intel i960RP RISC Processor - 4MB/8MB ECC EDO Memory - -DAC960PU 1/2/3 Wide Ultra SCSI-3 Channels - Intel i960CF RISC Processor - 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory - -DAC960PD 1/2/3 Wide Fast SCSI-2 Channels - Intel i960CF RISC Processor - 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory - -DAC960PL 1/2/3 Wide Fast SCSI-2 Channels - Intel i960 RISC Processor - 2MB/4MB/8MB/16MB/32MB DRAM Memory - -DAC960P 1/2/3 Wide Fast SCSI-2 Channels - Intel i960 RISC Processor - 2MB/4MB/8MB/16MB/32MB DRAM Memory - -For the eXtremeRAID 2000/3000 and AcceleRAID 352/170/160, firmware version -6.00-01 or above is required. - -For the eXtremeRAID 1100, firmware version 5.06-0-52 or above is required. - -For the AcceleRAID 250, 200, and 150, firmware version 4.06-0-57 or above is -required. - -For the DAC960PJ and DAC960PG, firmware version 4.06-0-00 or above is required. - -For the DAC960PU, DAC960PD, DAC960PL, and DAC960P, either firmware version -3.51-0-04 or above is required (for dual Flash ROM controllers), or firmware -version 2.73-0-00 or above is required (for single Flash ROM controllers) - -Please note that not all SCSI disk drives are suitable for use with DAC960 -controllers, and only particular firmware versions of any given model may -actually function correctly. Similarly, not all motherboards have a BIOS that -properly initializes the AcceleRAID 250, AcceleRAID 200, AcceleRAID 150, -DAC960PJ, and DAC960PG because the Intel i960RD/RP is a multi-function device. -If in doubt, contact Mylex RAID Technical Support (mylexsup@us.ibm.com) to -verify compatibility. Mylex makes available a hard disk compatibility list at -http://www.mylex.com/support/hdcomp/hd-lists.html. - - - DRIVER INSTALLATION - -This distribution was prepared for Linux kernel version 2.2.19 or 2.4.12. - -To install the DAC960 RAID driver, you may use the following commands, -replacing "/usr/src" with wherever you keep your Linux kernel source tree: - - cd /usr/src - tar -xvzf DAC960-2.2.11.tar.gz (or DAC960-2.4.11.tar.gz) - mv README.DAC960 linux/Documentation - mv DAC960.[ch] linux/drivers/block - patch -p0 < DAC960.patch (if DAC960.patch is included) - cd linux - make config - make bzImage (or zImage) - -Then install "arch/i386/boot/bzImage" or "arch/i386/boot/zImage" as your -standard kernel, run lilo if appropriate, and reboot. - -To create the necessary devices in /dev, the "make_rd" script included in -"DAC960-Utilities.tar.gz" from http://www.dandelion.com/Linux/ may be used. -LILO 21 and FDISK v2.9 include DAC960 support; also included in this archive -are patches to LILO 20 and FDISK v2.8 that add DAC960 support, along with -statically linked executables of LILO and FDISK. This modified version of LILO -will allow booting from a DAC960 controller and/or mounting the root file -system from a DAC960. - -Red Hat Linux 6.0 and SuSE Linux 6.1 include support for Mylex PCI RAID -controllers. Installing directly onto a DAC960 may be problematic from other -Linux distributions until their installation utilities are updated. - - - INSTALLATION NOTES - -Before installing Linux or adding DAC960 logical drives to an existing Linux -system, the controller must first be configured to provide one or more logical -drives using the BIOS Configuration Utility or DACCF. Please note that since -there are only at most 6 usable partitions on each logical drive, systems -requiring more partitions should subdivide a drive group into multiple logical -drives, each of which can have up to 6 usable partitions. Also, note that with -large disk arrays it is advisable to enable the 8GB BIOS Geometry (255/63) -rather than accepting the default 2GB BIOS Geometry (128/32); failing to so do -will cause the logical drive geometry to have more than 65535 cylinders which -will make it impossible for FDISK to be used properly. The 8GB BIOS Geometry -can be enabled by configuring the DAC960 BIOS, which is accessible via Alt-M -during the BIOS initialization sequence. - -For maximum performance and the most efficient E2FSCK performance, it is -recommended that EXT2 file systems be built with a 4KB block size and 16 block -stride to match the DAC960 controller's 64KB default stripe size. The command -"mke2fs -b 4096 -R stride=16 " is appropriate. Unless there will be a -large number of small files on the file systems, it is also beneficial to add -the "-i 16384" option to increase the bytes per inode parameter thereby -reducing the file system metadata. Finally, on systems that will only be run -with Linux 2.2 or later kernels it is beneficial to enable sparse superblocks -with the "-s 1" option. - - - DAC960 ANNOUNCEMENTS MAILING LIST - -The DAC960 Announcements Mailing List provides a forum for informing Linux -users of new driver releases and other announcements regarding Linux support -for DAC960 PCI RAID Controllers. To join the mailing list, send a message to -"dac960-announce-request@dandelion.com" with the line "subscribe" in the -message body. - - - CONTROLLER CONFIGURATION AND STATUS MONITORING - -The DAC960 RAID controllers running firmware 4.06 or above include a Background -Initialization facility so that system downtime is minimized both for initial -installation and subsequent configuration of additional storage. The BIOS -Configuration Utility (accessible via Alt-R during the BIOS initialization -sequence) is used to quickly configure the controller, and then the logical -drives that have been created are available for immediate use even while they -are still being initialized by the controller. The primary need for online -configuration and status monitoring is then to avoid system downtime when disk -drives fail and must be replaced. Mylex's online monitoring and configuration -utilities are being ported to Linux and will become available at some point in -the future. Note that with a SAF-TE (SCSI Accessed Fault-Tolerant Enclosure) -enclosure, the controller is able to rebuild failed drives automatically as -soon as a drive replacement is made available. - -The primary interfaces for controller configuration and status monitoring are -special files created in the /proc/rd/... hierarchy along with the normal -system console logging mechanism. Whenever the system is operating, the DAC960 -driver queries each controller for status information every 10 seconds, and -checks for additional conditions every 60 seconds. The initial status of each -controller is always available for controller N in /proc/rd/cN/initial_status, -and the current status as of the last status monitoring query is available in -/proc/rd/cN/current_status. In addition, status changes are also logged by the -driver to the system console and will appear in the log files maintained by -syslog. The progress of asynchronous rebuild or consistency check operations -is also available in /proc/rd/cN/current_status, and progress messages are -logged to the system console at most every 60 seconds. - -Starting with the 2.2.3/2.0.3 versions of the driver, the status information -available in /proc/rd/cN/initial_status and /proc/rd/cN/current_status has been -augmented to include the vendor, model, revision, and serial number (if -available) for each physical device found connected to the controller: - -***** DAC960 RAID Driver Version 2.2.3 of 19 August 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PRL PCI RAID Controller - Firmware Version: 4.07-0-07, Channels: 1, Memory Size: 16MB - PCI Bus: 1, Device: 4, Function: 1, I/O Address: Unassigned - PCI Address: 0xFE300000 mapped at 0xA0800000, IRQ Channel: 21 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - SAF-TE Enclosure Management Enabled - Physical Devices: - 0:0 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68016775HA - Disk Status: Online, 17928192 blocks - 0:1 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68004E53HA - Disk Status: Online, 17928192 blocks - 0:2 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 13013935HA - Disk Status: Online, 17928192 blocks - 0:3 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 13016897HA - Disk Status: Online, 17928192 blocks - 0:4 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68019905HA - Disk Status: Online, 17928192 blocks - 0:5 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68012753HA - Disk Status: Online, 17928192 blocks - 0:6 Vendor: ESG-SHV Model: SCA HSBP M6 Revision: 0.61 - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 89640960 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -To simplify the monitoring process for custom software, the special file -/proc/rd/status returns "OK" when all DAC960 controllers in the system are -operating normally and no failures have occurred, or "ALERT" if any logical -drives are offline or critical or any non-standby physical drives are dead. - -Configuration commands for controller N are available via the special file -/proc/rd/cN/user_command. A human readable command can be written to this -special file to initiate a configuration operation, and the results of the -operation can then be read back from the special file in addition to being -logged to the system console. The shell command sequence - - echo "" > /proc/rd/c0/user_command - cat /proc/rd/c0/user_command - -is typically used to execute configuration commands. The configuration -commands are: - - flush-cache - - The "flush-cache" command flushes the controller's cache. The system - automatically flushes the cache at shutdown or if the driver module is - unloaded, so this command is only needed to be certain a write back cache - is flushed to disk before the system is powered off by a command to a UPS. - Note that the flush-cache command also stops an asynchronous rebuild or - consistency check, so it should not be used except when the system is being - halted. - - kill : - - The "kill" command marks the physical drive : as DEAD. - This command is provided primarily for testing, and should not be used - during normal system operation. - - make-online : - - The "make-online" command changes the physical drive : - from status DEAD to status ONLINE. In cases where multiple physical drives - have been killed simultaneously, this command may be used to bring all but - one of them back online, after which a rebuild to the final drive is - necessary. - - Warning: make-online should only be used on a dead physical drive that is - an active part of a drive group, never on a standby drive. The command - should never be used on a dead drive that is part of a critical logical - drive; rebuild should be used if only a single drive is dead. - - make-standby : - - The "make-standby" command changes physical drive : - from status DEAD to status STANDBY. It should only be used in cases where - a dead drive was replaced after an automatic rebuild was performed onto a - standby drive. It cannot be used to add a standby drive to the controller - configuration if one was not created initially; the BIOS Configuration - Utility must be used for that currently. - - rebuild : - - The "rebuild" command initiates an asynchronous rebuild onto physical drive - :. It should only be used when a dead drive has been - replaced. - - check-consistency - - The "check-consistency" command initiates an asynchronous consistency check - of with automatic restoration. It can be used - whenever it is desired to verify the consistency of the redundancy - information. - - cancel-rebuild - cancel-consistency-check - - The "cancel-rebuild" and "cancel-consistency-check" commands cancel any - rebuild or consistency check operations previously initiated. - - - EXAMPLE I - DRIVE FAILURE WITHOUT A STANDBY DRIVE - -The following annotated logs demonstrate the controller configuration and and -online status monitoring capabilities of the Linux DAC960 Driver. The test -configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a -DAC960PJ controller. The physical drives are configured into a single drive -group without a standby drive, and the drive group has been configured into two -logical drives, one RAID-5 and one RAID-6. Note that these logs are from an -earlier version of the driver and the messages have changed somewhat with newer -releases, but the functionality remains similar. First, here is the current -status of the RAID configuration: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status -***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PJ PCI RAID Controller - Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB - PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned - PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -gwynedd:/u/lnz# cat /proc/rd/status -OK - -The above messages indicate that everything is healthy, and /proc/rd/status -returns "OK" indicating that there are no problems with any DAC960 controller -in the system. For demonstration purposes, while I/O is active Physical Drive -1:1 is now disconnected, simulating a drive failure. The failure is noted by -the driver within 10 seconds of the controller's having detected it, and the -driver logs the following console status messages indicating that Logical -Drives 0 and 1 are now CRITICAL as a result of Physical Drive 1:1 being DEAD: - -DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:1 killed because of timeout on SCSI command -DAC960#0: Physical Drive 1:1 is now DEAD -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL - -The Sense Keys logged here are just Check Condition / Unit Attention conditions -arising from a SCSI bus reset that is forced by the controller during its error -recovery procedures. Concurrently with the above, the driver status available -from /proc/rd also reflects the drive failure. The status message in -/proc/rd/status has changed from "OK" to "ALERT": - -gwynedd:/u/lnz# cat /proc/rd/status -ALERT - -and /proc/rd/c0/current_status has been updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Dead, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -Since there are no standby drives configured, the system can continue to access -the logical drives in a performance degraded mode until the failed drive is -replaced and a rebuild operation completed to restore the redundancy of the -logical drives. Once Physical Drive 1:1 is replaced with a properly -functioning drive, or if the physical drive was killed without having failed -(e.g., due to electrical problems on the SCSI bus), the user can instruct the -controller to initiate a rebuild operation onto the newly replaced drive: - -gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command -gwynedd:/u/lnz# cat /proc/rd/c0/user_command -Rebuild of Physical Drive 1:1 Initiated - -The echo command instructs the controller to initiate an asynchronous rebuild -operation onto Physical Drive 1:1, and the status message that results from the -operation is then available for reading from /proc/rd/c0/user_command, as well -as being logged to the console by the driver. - -Within 10 seconds of this command the driver logs the initiation of the -asynchronous rebuild operation: - -DAC960#0: Rebuild of Physical Drive 1:1 Initiated -DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01 -DAC960#0: Physical Drive 1:1 is now WRITE-ONLY -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 1% completed - -and /proc/rd/c0/current_status is updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Write-Only, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 6% completed - -As the rebuild progresses, the current status in /proc/rd/c0/current_status is -updated every 10 seconds: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Write-Only, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 15% completed - -and every minute a progress message is logged to the console by the driver: - -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 32% completed -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 63% completed -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 94% completed -DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 94% completed - -Finally, the rebuild completes successfully. The driver logs the status of the -logical and physical drives and the rebuild completion: - -DAC960#0: Rebuild Completed Successfully -DAC960#0: Physical Drive 1:1 is now ONLINE -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE - -/proc/rd/c0/current_status is updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru - Rebuild Completed Successfully - -and /proc/rd/status indicates that everything is healthy once again: - -gwynedd:/u/lnz# cat /proc/rd/status -OK - - - EXAMPLE II - DRIVE FAILURE WITH A STANDBY DRIVE - -The following annotated logs demonstrate the controller configuration and and -online status monitoring capabilities of the Linux DAC960 Driver. The test -configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a -DAC960PJ controller. The physical drives are configured into a single drive -group with a standby drive, and the drive group has been configured into two -logical drives, one RAID-5 and one RAID-6. Note that these logs are from an -earlier version of the driver and the messages have changed somewhat with newer -releases, but the functionality remains similar. First, here is the current -status of the RAID configuration: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status -***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PJ PCI RAID Controller - Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB - PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned - PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Standby, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -gwynedd:/u/lnz# cat /proc/rd/status -OK - -The above messages indicate that everything is healthy, and /proc/rd/status -returns "OK" indicating that there are no problems with any DAC960 controller -in the system. For demonstration purposes, while I/O is active Physical Drive -1:2 is now disconnected, simulating a drive failure. The failure is noted by -the driver within 10 seconds of the controller's having detected it, and the -driver logs the following console status messages: - -DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:2 killed because of timeout on SCSI command -DAC960#0: Physical Drive 1:2 is now DEAD -DAC960#0: Physical Drive 1:2 killed because it was removed -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL - -Since a standby drive is configured, the controller automatically begins -rebuilding onto the standby drive: - -DAC960#0: Physical Drive 1:3 is now WRITE-ONLY -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed - -Concurrently with the above, the driver status available from /proc/rd also -reflects the drive failure and automatic rebuild. The status message in -/proc/rd/status has changed from "OK" to "ALERT": - -gwynedd:/u/lnz# cat /proc/rd/status -ALERT - -and /proc/rd/c0/current_status has been updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Dead, 2201600 blocks - 1:3 - Disk: Write-Only, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed - -As the rebuild progresses, the current status in /proc/rd/c0/current_status is -updated every 10 seconds: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Dead, 2201600 blocks - 1:3 - Disk: Write-Only, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed - -and every minute a progress message is logged on the console by the driver: - -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 76% completed -DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 66% completed -DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 84% completed - -Finally, the rebuild completes successfully. The driver logs the status of the -logical and physical drives and the rebuild completion: - -DAC960#0: Rebuild Completed Successfully -DAC960#0: Physical Drive 1:3 is now ONLINE -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE - -/proc/rd/c0/current_status is updated: - -***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PJ PCI RAID Controller - Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB - PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned - PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Dead, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru - Rebuild Completed Successfully - -and /proc/rd/status indicates that everything is healthy once again: - -gwynedd:/u/lnz# cat /proc/rd/status -OK - -Note that the absence of a viable standby drive does not create an "ALERT" -status. Once dead Physical Drive 1:2 has been replaced, the controller must be -told that this has occurred and that the newly replaced drive should become the -new standby drive: - -gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command -gwynedd:/u/lnz# cat /proc/rd/c0/user_command -Make Standby of Physical Drive 1:2 Succeeded - -The echo command instructs the controller to make Physical Drive 1:2 into a -standby drive, and the status message that results from the operation is then -available for reading from /proc/rd/c0/user_command, as well as being logged to -the console by the driver. Within 60 seconds of this command the driver logs: - -DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01 -DAC960#0: Physical Drive 1:2 is now STANDBY -DAC960#0: Make Standby of Physical Drive 1:2 Succeeded - -and /proc/rd/c0/current_status is updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Standby, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru - Rebuild Completed Successfully diff --git a/Documentation/README.cycladesZ b/Documentation/README.cycladesZ deleted file mode 100644 index 024a69443cc..00000000000 --- a/Documentation/README.cycladesZ +++ /dev/null @@ -1,8 +0,0 @@ - -The Cyclades-Z must have firmware loaded onto the card before it will -operate. This operation should be performed during system startup, - -The firmware, loader program and the latest device driver code are -available from Cyclades at - ftp://ftp.cyclades.com/pub/cyclades/cyclades-z/linux/ - diff --git a/Documentation/blockdev/00-INDEX b/Documentation/blockdev/00-INDEX new file mode 100644 index 00000000000..86f054c4701 --- /dev/null +++ b/Documentation/blockdev/00-INDEX @@ -0,0 +1,16 @@ +00-INDEX + - this file +README.DAC960 + - info on Mylex DAC960/DAC1100 PCI RAID Controller Driver for Linux. +cciss.txt + - info, major/minor #'s for Compaq's SMART Array Controllers. +cpqarray.txt + - info on using Compaq's SMART2 Intelligent Disk Array Controllers. +floppy.txt + - notes and driver options for the floppy disk driver. +nbd.txt + - info on a TCP implementation of a network block device. +paride.txt + - information about the parallel port IDE subsystem. +ramdisk.txt + - short guide on how to set up and use the RAM disk. diff --git a/Documentation/blockdev/README.DAC960 b/Documentation/blockdev/README.DAC960 new file mode 100644 index 00000000000..0e8f618ab53 --- /dev/null +++ b/Documentation/blockdev/README.DAC960 @@ -0,0 +1,756 @@ + Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers + + Version 2.2.11 for Linux 2.2.19 + Version 2.4.11 for Linux 2.4.12 + + PRODUCTION RELEASE + + 11 October 2001 + + Leonard N. Zubkoff + Dandelion Digital + lnz@dandelion.com + + Copyright 1998-2001 by Leonard N. Zubkoff + + + INTRODUCTION + +Mylex, Inc. designs and manufactures a variety of high performance PCI RAID +controllers. Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont, +California 94555, USA and can be reached at 510.796.6100 or on the World Wide +Web at http://www.mylex.com. Mylex Technical Support can be reached by +electronic mail at mylexsup@us.ibm.com, by voice at 510.608.2400, or by FAX at +510.745.7715. Contact information for offices in Europe and Japan is available +on their Web site. + +The latest information on Linux support for DAC960 PCI RAID Controllers, as +well as the most recent release of this driver, will always be available from +my Linux Home Page at URL "http://www.dandelion.com/Linux/". The Linux DAC960 +driver supports all current Mylex PCI RAID controllers including the new +eXtremeRAID 2000/3000 and AcceleRAID 352/170/160 models which have an entirely +new firmware interface from the older eXtremeRAID 1100, AcceleRAID 150/200/250, +and DAC960PJ/PG/PU/PD/PL. See below for a complete controller list as well as +minimum firmware version requirements. For simplicity, in most places this +documentation refers to DAC960 generically rather than explicitly listing all +the supported models. + +Driver bug reports should be sent via electronic mail to "lnz@dandelion.com". +Please include with the bug report the complete configuration messages reported +by the driver at startup, along with any subsequent system messages relevant to +the controller's operation, and a detailed description of your system's +hardware configuration. Driver bugs are actually quite rare; if you encounter +problems with disks being marked offline, for example, please contact Mylex +Technical Support as the problem is related to the hardware configuration +rather than the Linux driver. + +Please consult the RAID controller documentation for detailed information +regarding installation and configuration of the controllers. This document +primarily provides information specific to the Linux support. + + + DRIVER FEATURES + +The DAC960 RAID controllers are supported solely as high performance RAID +controllers, not as interfaces to arbitrary SCSI devices. The Linux DAC960 +driver operates at the block device level, the same level as the SCSI and IDE +drivers. Unlike other RAID controllers currently supported on Linux, the +DAC960 driver is not dependent on the SCSI subsystem, and hence avoids all the +complexity and unnecessary code that would be associated with an implementation +as a SCSI driver. The DAC960 driver is designed for as high a performance as +possible with no compromises or extra code for compatibility with lower +performance devices. The DAC960 driver includes extensive error logging and +online configuration management capabilities. Except for initial configuration +of the controller and adding new disk drives, most everything can be handled +from Linux while the system is operational. + +The DAC960 driver is architected to support up to 8 controllers per system. +Each DAC960 parallel SCSI controller can support up to 15 disk drives per +channel, for a maximum of 60 drives on a four channel controller; the fibre +channel eXtremeRAID 3000 controller supports up to 125 disk drives per loop for +a total of 250 drives. The drives installed on a controller are divided into +one or more "Drive Groups", and then each Drive Group is subdivided further +into 1 to 32 "Logical Drives". Each Logical Drive has a specific RAID Level +and caching policy associated with it, and it appears to Linux as a single +block device. Logical Drives are further subdivided into up to 7 partitions +through the normal Linux and PC disk partitioning schemes. Logical Drives are +also known as "System Drives", and Drive Groups are also called "Packs". Both +terms are in use in the Mylex documentation; I have chosen to standardize on +the more generic "Logical Drive" and "Drive Group". + +DAC960 RAID disk devices are named in the style of the obsolete Device File +System (DEVFS). The device corresponding to Logical Drive D on Controller C +is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1 +through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on +Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI +disks the device names will not change in the event of a disk drive failure. +The DAC960 driver is assigned major numbers 48 - 55 with one major number per +controller. The 8 bits of minor number are divided into 5 bits for the Logical +Drive and 3 bits for the partition. + + + SUPPORTED DAC960/AcceleRAID/eXtremeRAID PCI RAID CONTROLLERS + +The following list comprises the supported DAC960, AcceleRAID, and eXtremeRAID +PCI RAID Controllers as of the date of this document. It is recommended that +anyone purchasing a Mylex PCI RAID Controller not in the following table +contact the author beforehand to verify that it is or will be supported. + +eXtremeRAID 3000 + 1 Wide Ultra-2/LVD SCSI channel + 2 External Fibre FC-AL channels + 233MHz StrongARM SA 110 Processor + 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) + 32MB/64MB ECC SDRAM Memory + +eXtremeRAID 2000 + 4 Wide Ultra-160 LVD SCSI channels + 233MHz StrongARM SA 110 Processor + 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) + 32MB/64MB ECC SDRAM Memory + +AcceleRAID 352 + 2 Wide Ultra-160 LVD SCSI channels + 100MHz Intel i960RN RISC Processor + 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) + 32MB/64MB ECC SDRAM Memory + +AcceleRAID 170 + 1 Wide Ultra-160 LVD SCSI channel + 100MHz Intel i960RM RISC Processor + 16MB/32MB/64MB ECC SDRAM Memory + +AcceleRAID 160 (AcceleRAID 170LP) + 1 Wide Ultra-160 LVD SCSI channel + 100MHz Intel i960RS RISC Processor + Built in 16M ECC SDRAM Memory + PCI Low Profile Form Factor - fit for 2U height + +eXtremeRAID 1100 (DAC1164P) + 3 Wide Ultra-2/LVD SCSI channels + 233MHz StrongARM SA 110 Processor + 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) + 16MB/32MB/64MB Parity SDRAM Memory with Battery Backup + +AcceleRAID 250 (DAC960PTL1) + Uses onboard Symbios SCSI chips on certain motherboards + Also includes one onboard Wide Ultra-2/LVD SCSI Channel + 66MHz Intel i960RD RISC Processor + 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory + +AcceleRAID 200 (DAC960PTL0) + Uses onboard Symbios SCSI chips on certain motherboards + Includes no onboard SCSI Channels + 66MHz Intel i960RD RISC Processor + 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory + +AcceleRAID 150 (DAC960PRL) + Uses onboard Symbios SCSI chips on certain motherboards + Also includes one onboard Wide Ultra-2/LVD SCSI Channel + 33MHz Intel i960RP RISC Processor + 4MB Parity EDO Memory + +DAC960PJ 1/2/3 Wide Ultra SCSI-3 Channels + 66MHz Intel i960RD RISC Processor + 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory + +DAC960PG 1/2/3 Wide Ultra SCSI-3 Channels + 33MHz Intel i960RP RISC Processor + 4MB/8MB ECC EDO Memory + +DAC960PU 1/2/3 Wide Ultra SCSI-3 Channels + Intel i960CF RISC Processor + 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory + +DAC960PD 1/2/3 Wide Fast SCSI-2 Channels + Intel i960CF RISC Processor + 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory + +DAC960PL 1/2/3 Wide Fast SCSI-2 Channels + Intel i960 RISC Processor + 2MB/4MB/8MB/16MB/32MB DRAM Memory + +DAC960P 1/2/3 Wide Fast SCSI-2 Channels + Intel i960 RISC Processor + 2MB/4MB/8MB/16MB/32MB DRAM Memory + +For the eXtremeRAID 2000/3000 and AcceleRAID 352/170/160, firmware version +6.00-01 or above is required. + +For the eXtremeRAID 1100, firmware version 5.06-0-52 or above is required. + +For the AcceleRAID 250, 200, and 150, firmware version 4.06-0-57 or above is +required. + +For the DAC960PJ and DAC960PG, firmware version 4.06-0-00 or above is required. + +For the DAC960PU, DAC960PD, DAC960PL, and DAC960P, either firmware version +3.51-0-04 or above is required (for dual Flash ROM controllers), or firmware +version 2.73-0-00 or above is required (for single Flash ROM controllers) + +Please note that not all SCSI disk drives are suitable for use with DAC960 +controllers, and only particular firmware versions of any given model may +actually function correctly. Similarly, not all motherboards have a BIOS that +properly initializes the AcceleRAID 250, AcceleRAID 200, AcceleRAID 150, +DAC960PJ, and DAC960PG because the Intel i960RD/RP is a multi-function device. +If in doubt, contact Mylex RAID Technical Support (mylexsup@us.ibm.com) to +verify compatibility. Mylex makes available a hard disk compatibility list at +http://www.mylex.com/support/hdcomp/hd-lists.html. + + + DRIVER INSTALLATION + +This distribution was prepared for Linux kernel version 2.2.19 or 2.4.12. + +To install the DAC960 RAID driver, you may use the following commands, +replacing "/usr/src" with wherever you keep your Linux kernel source tree: + + cd /usr/src + tar -xvzf DAC960-2.2.11.tar.gz (or DAC960-2.4.11.tar.gz) + mv README.DAC960 linux/Documentation + mv DAC960.[ch] linux/drivers/block + patch -p0 < DAC960.patch (if DAC960.patch is included) + cd linux + make config + make bzImage (or zImage) + +Then install "arch/i386/boot/bzImage" or "arch/i386/boot/zImage" as your +standard kernel, run lilo if appropriate, and reboot. + +To create the necessary devices in /dev, the "make_rd" script included in +"DAC960-Utilities.tar.gz" from http://www.dandelion.com/Linux/ may be used. +LILO 21 and FDISK v2.9 include DAC960 support; also included in this archive +are patches to LILO 20 and FDISK v2.8 that add DAC960 support, along with +statically linked executables of LILO and FDISK. This modified version of LILO +will allow booting from a DAC960 controller and/or mounting the root file +system from a DAC960. + +Red Hat Linux 6.0 and SuSE Linux 6.1 include support for Mylex PCI RAID +controllers. Installing directly onto a DAC960 may be problematic from other +Linux distributions until their installation utilities are updated. + + + INSTALLATION NOTES + +Before installing Linux or adding DAC960 logical drives to an existing Linux +system, the controller must first be configured to provide one or more logical +drives using the BIOS Configuration Utility or DACCF. Please note that since +there are only at most 6 usable partitions on each logical drive, systems +requiring more partitions should subdivide a drive group into multiple logical +drives, each of which can have up to 6 usable partitions. Also, note that with +large disk arrays it is advisable to enable the 8GB BIOS Geometry (255/63) +rather than accepting the default 2GB BIOS Geometry (128/32); failing to so do +will cause the logical drive geometry to have more than 65535 cylinders which +will make it impossible for FDISK to be used properly. The 8GB BIOS Geometry +can be enabled by configuring the DAC960 BIOS, which is accessible via Alt-M +during the BIOS initialization sequence. + +For maximum performance and the most efficient E2FSCK performance, it is +recommended that EXT2 file systems be built with a 4KB block size and 16 block +stride to match the DAC960 controller's 64KB default stripe size. The command +"mke2fs -b 4096 -R stride=16 " is appropriate. Unless there will be a +large number of small files on the file systems, it is also beneficial to add +the "-i 16384" option to increase the bytes per inode parameter thereby +reducing the file system metadata. Finally, on systems that will only be run +with Linux 2.2 or later kernels it is beneficial to enable sparse superblocks +with the "-s 1" option. + + + DAC960 ANNOUNCEMENTS MAILING LIST + +The DAC960 Announcements Mailing List provides a forum for informing Linux +users of new driver releases and other announcements regarding Linux support +for DAC960 PCI RAID Controllers. To join the mailing list, send a message to +"dac960-announce-request@dandelion.com" with the line "subscribe" in the +message body. + + + CONTROLLER CONFIGURATION AND STATUS MONITORING + +The DAC960 RAID controllers running firmware 4.06 or above include a Background +Initialization facility so that system downtime is minimized both for initial +installation and subsequent configuration of additional storage. The BIOS +Configuration Utility (accessible via Alt-R during the BIOS initialization +sequence) is used to quickly configure the controller, and then the logical +drives that have been created are available for immediate use even while they +are still being initialized by the controller. The primary need for online +configuration and status monitoring is then to avoid system downtime when disk +drives fail and must be replaced. Mylex's online monitoring and configuration +utilities are being ported to Linux and will become available at some point in +the future. Note that with a SAF-TE (SCSI Accessed Fault-Tolerant Enclosure) +enclosure, the controller is able to rebuild failed drives automatically as +soon as a drive replacement is made available. + +The primary interfaces for controller configuration and status monitoring are +special files created in the /proc/rd/... hierarchy along with the normal +system console logging mechanism. Whenever the system is operating, the DAC960 +driver queries each controller for status information every 10 seconds, and +checks for additional conditions every 60 seconds. The initial status of each +controller is always available for controller N in /proc/rd/cN/initial_status, +and the current status as of the last status monitoring query is available in +/proc/rd/cN/current_status. In addition, status changes are also logged by the +driver to the system console and will appear in the log files maintained by +syslog. The progress of asynchronous rebuild or consistency check operations +is also available in /proc/rd/cN/current_status, and progress messages are +logged to the system console at most every 60 seconds. + +Starting with the 2.2.3/2.0.3 versions of the driver, the status information +available in /proc/rd/cN/initial_status and /proc/rd/cN/current_status has been +augmented to include the vendor, model, revision, and serial number (if +available) for each physical device found connected to the controller: + +***** DAC960 RAID Driver Version 2.2.3 of 19 August 1999 ***** +Copyright 1998-1999 by Leonard N. Zubkoff +Configuring Mylex DAC960PRL PCI RAID Controller + Firmware Version: 4.07-0-07, Channels: 1, Memory Size: 16MB + PCI Bus: 1, Device: 4, Function: 1, I/O Address: Unassigned + PCI Address: 0xFE300000 mapped at 0xA0800000, IRQ Channel: 21 + Controller Queue Depth: 128, Maximum Blocks per Command: 128 + Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 + Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 + SAF-TE Enclosure Management Enabled + Physical Devices: + 0:0 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 68016775HA + Disk Status: Online, 17928192 blocks + 0:1 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 68004E53HA + Disk Status: Online, 17928192 blocks + 0:2 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 13013935HA + Disk Status: Online, 17928192 blocks + 0:3 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 13016897HA + Disk Status: Online, 17928192 blocks + 0:4 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 68019905HA + Disk Status: Online, 17928192 blocks + 0:5 Vendor: IBM Model: DRVS09D Revision: 0270 + Serial Number: 68012753HA + Disk Status: Online, 17928192 blocks + 0:6 Vendor: ESG-SHV Model: SCA HSBP M6 Revision: 0.61 + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 89640960 blocks, Write Thru + No Rebuild or Consistency Check in Progress + +To simplify the monitoring process for custom software, the special file +/proc/rd/status returns "OK" when all DAC960 controllers in the system are +operating normally and no failures have occurred, or "ALERT" if any logical +drives are offline or critical or any non-standby physical drives are dead. + +Configuration commands for controller N are available via the special file +/proc/rd/cN/user_command. A human readable command can be written to this +special file to initiate a configuration operation, and the results of the +operation can then be read back from the special file in addition to being +logged to the system console. The shell command sequence + + echo "" > /proc/rd/c0/user_command + cat /proc/rd/c0/user_command + +is typically used to execute configuration commands. The configuration +commands are: + + flush-cache + + The "flush-cache" command flushes the controller's cache. The system + automatically flushes the cache at shutdown or if the driver module is + unloaded, so this command is only needed to be certain a write back cache + is flushed to disk before the system is powered off by a command to a UPS. + Note that the flush-cache command also stops an asynchronous rebuild or + consistency check, so it should not be used except when the system is being + halted. + + kill : + + The "kill" command marks the physical drive : as DEAD. + This command is provided primarily for testing, and should not be used + during normal system operation. + + make-online : + + The "make-online" command changes the physical drive : + from status DEAD to status ONLINE. In cases where multiple physical drives + have been killed simultaneously, this command may be used to bring all but + one of them back online, after which a rebuild to the final drive is + necessary. + + Warning: make-online should only be used on a dead physical drive that is + an active part of a drive group, never on a standby drive. The command + should never be used on a dead drive that is part of a critical logical + drive; rebuild should be used if only a single drive is dead. + + make-standby : + + The "make-standby" command changes physical drive : + from status DEAD to status STANDBY. It should only be used in cases where + a dead drive was replaced after an automatic rebuild was performed onto a + standby drive. It cannot be used to add a standby drive to the controller + configuration if one was not created initially; the BIOS Configuration + Utility must be used for that currently. + + rebuild : + + The "rebuild" command initiates an asynchronous rebuild onto physical drive + :. It should only be used when a dead drive has been + replaced. + + check-consistency + + The "check-consistency" command initiates an asynchronous consistency check + of with automatic restoration. It can be used + whenever it is desired to verify the consistency of the redundancy + information. + + cancel-rebuild + cancel-consistency-check + + The "cancel-rebuild" and "cancel-consistency-check" commands cancel any + rebuild or consistency check operations previously initiated. + + + EXAMPLE I - DRIVE FAILURE WITHOUT A STANDBY DRIVE + +The following annotated logs demonstrate the controller configuration and and +online status monitoring capabilities of the Linux DAC960 Driver. The test +configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a +DAC960PJ controller. The physical drives are configured into a single drive +group without a standby drive, and the drive group has been configured into two +logical drives, one RAID-5 and one RAID-6. Note that these logs are from an +earlier version of the driver and the messages have changed somewhat with newer +releases, but the functionality remains similar. First, here is the current +status of the RAID configuration: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status +***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** +Copyright 1998-1999 by Leonard N. Zubkoff +Configuring Mylex DAC960PJ PCI RAID Controller + Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB + PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned + PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 + Controller Queue Depth: 128, Maximum Blocks per Command: 128 + Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 + Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru + No Rebuild or Consistency Check in Progress + +gwynedd:/u/lnz# cat /proc/rd/status +OK + +The above messages indicate that everything is healthy, and /proc/rd/status +returns "OK" indicating that there are no problems with any DAC960 controller +in the system. For demonstration purposes, while I/O is active Physical Drive +1:1 is now disconnected, simulating a drive failure. The failure is noted by +the driver within 10 seconds of the controller's having detected it, and the +driver logs the following console status messages indicating that Logical +Drives 0 and 1 are now CRITICAL as a result of Physical Drive 1:1 being DEAD: + +DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 +DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 +DAC960#0: Physical Drive 1:1 killed because of timeout on SCSI command +DAC960#0: Physical Drive 1:1 is now DEAD +DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL +DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL + +The Sense Keys logged here are just Check Condition / Unit Attention conditions +arising from a SCSI bus reset that is forced by the controller during its error +recovery procedures. Concurrently with the above, the driver status available +from /proc/rd also reflects the drive failure. The status message in +/proc/rd/status has changed from "OK" to "ALERT": + +gwynedd:/u/lnz# cat /proc/rd/status +ALERT + +and /proc/rd/c0/current_status has been updated: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Dead, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru + No Rebuild or Consistency Check in Progress + +Since there are no standby drives configured, the system can continue to access +the logical drives in a performance degraded mode until the failed drive is +replaced and a rebuild operation completed to restore the redundancy of the +logical drives. Once Physical Drive 1:1 is replaced with a properly +functioning drive, or if the physical drive was killed without having failed +(e.g., due to electrical problems on the SCSI bus), the user can instruct the +controller to initiate a rebuild operation onto the newly replaced drive: + +gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command +gwynedd:/u/lnz# cat /proc/rd/c0/user_command +Rebuild of Physical Drive 1:1 Initiated + +The echo command instructs the controller to initiate an asynchronous rebuild +operation onto Physical Drive 1:1, and the status message that results from the +operation is then available for reading from /proc/rd/c0/user_command, as well +as being logged to the console by the driver. + +Within 10 seconds of this command the driver logs the initiation of the +asynchronous rebuild operation: + +DAC960#0: Rebuild of Physical Drive 1:1 Initiated +DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01 +DAC960#0: Physical Drive 1:1 is now WRITE-ONLY +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 1% completed + +and /proc/rd/c0/current_status is updated: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Write-Only, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru + Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 6% completed + +As the rebuild progresses, the current status in /proc/rd/c0/current_status is +updated every 10 seconds: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Write-Only, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru + Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 15% completed + +and every minute a progress message is logged to the console by the driver: + +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 32% completed +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 63% completed +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 94% completed +DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 94% completed + +Finally, the rebuild completes successfully. The driver logs the status of the +logical and physical drives and the rebuild completion: + +DAC960#0: Rebuild Completed Successfully +DAC960#0: Physical Drive 1:1 is now ONLINE +DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE +DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE + +/proc/rd/c0/current_status is updated: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru + Rebuild Completed Successfully + +and /proc/rd/status indicates that everything is healthy once again: + +gwynedd:/u/lnz# cat /proc/rd/status +OK + + + EXAMPLE II - DRIVE FAILURE WITH A STANDBY DRIVE + +The following annotated logs demonstrate the controller configuration and and +online status monitoring capabilities of the Linux DAC960 Driver. The test +configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a +DAC960PJ controller. The physical drives are configured into a single drive +group with a standby drive, and the drive group has been configured into two +logical drives, one RAID-5 and one RAID-6. Note that these logs are from an +earlier version of the driver and the messages have changed somewhat with newer +releases, but the functionality remains similar. First, here is the current +status of the RAID configuration: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status +***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** +Copyright 1998-1999 by Leonard N. Zubkoff +Configuring Mylex DAC960PJ PCI RAID Controller + Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB + PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned + PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 + Controller Queue Depth: 128, Maximum Blocks per Command: 128 + Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 + Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Online, 2201600 blocks + 1:3 - Disk: Standby, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru + No Rebuild or Consistency Check in Progress + +gwynedd:/u/lnz# cat /proc/rd/status +OK + +The above messages indicate that everything is healthy, and /proc/rd/status +returns "OK" indicating that there are no problems with any DAC960 controller +in the system. For demonstration purposes, while I/O is active Physical Drive +1:2 is now disconnected, simulating a drive failure. The failure is noted by +the driver within 10 seconds of the controller's having detected it, and the +driver logs the following console status messages: + +DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 +DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 +DAC960#0: Physical Drive 1:2 killed because of timeout on SCSI command +DAC960#0: Physical Drive 1:2 is now DEAD +DAC960#0: Physical Drive 1:2 killed because it was removed +DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL +DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL + +Since a standby drive is configured, the controller automatically begins +rebuilding onto the standby drive: + +DAC960#0: Physical Drive 1:3 is now WRITE-ONLY +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed + +Concurrently with the above, the driver status available from /proc/rd also +reflects the drive failure and automatic rebuild. The status message in +/proc/rd/status has changed from "OK" to "ALERT": + +gwynedd:/u/lnz# cat /proc/rd/status +ALERT + +and /proc/rd/c0/current_status has been updated: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Dead, 2201600 blocks + 1:3 - Disk: Write-Only, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru + Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed + +As the rebuild progresses, the current status in /proc/rd/c0/current_status is +updated every 10 seconds: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Dead, 2201600 blocks + 1:3 - Disk: Write-Only, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru + Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed + +and every minute a progress message is logged on the console by the driver: + +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed +DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 76% completed +DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 66% completed +DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 84% completed + +Finally, the rebuild completes successfully. The driver logs the status of the +logical and physical drives and the rebuild completion: + +DAC960#0: Rebuild Completed Successfully +DAC960#0: Physical Drive 1:3 is now ONLINE +DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE +DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE + +/proc/rd/c0/current_status is updated: + +***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** +Copyright 1998-1999 by Leonard N. Zubkoff +Configuring Mylex DAC960PJ PCI RAID Controller + Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB + PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned + PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 + Controller Queue Depth: 128, Maximum Blocks per Command: 128 + Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 + Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Dead, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru + Rebuild Completed Successfully + +and /proc/rd/status indicates that everything is healthy once again: + +gwynedd:/u/lnz# cat /proc/rd/status +OK + +Note that the absence of a viable standby drive does not create an "ALERT" +status. Once dead Physical Drive 1:2 has been replaced, the controller must be +told that this has occurred and that the newly replaced drive should become the +new standby drive: + +gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command +gwynedd:/u/lnz# cat /proc/rd/c0/user_command +Make Standby of Physical Drive 1:2 Succeeded + +The echo command instructs the controller to make Physical Drive 1:2 into a +standby drive, and the status message that results from the operation is then +available for reading from /proc/rd/c0/user_command, as well as being logged to +the console by the driver. Within 60 seconds of this command the driver logs: + +DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01 +DAC960#0: Physical Drive 1:2 is now STANDBY +DAC960#0: Make Standby of Physical Drive 1:2 Succeeded + +and /proc/rd/c0/current_status is updated: + +gwynedd:/u/lnz# cat /proc/rd/c0/current_status + ... + Physical Devices: + 0:1 - Disk: Online, 2201600 blocks + 0:2 - Disk: Online, 2201600 blocks + 0:3 - Disk: Online, 2201600 blocks + 1:1 - Disk: Online, 2201600 blocks + 1:2 - Disk: Standby, 2201600 blocks + 1:3 - Disk: Online, 2201600 blocks + Logical Drives: + /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru + /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru + Rebuild Completed Successfully diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt new file mode 100644 index 00000000000..89698e8df7d --- /dev/null +++ b/Documentation/blockdev/cciss.txt @@ -0,0 +1,171 @@ +This driver is for Compaq's SMART Array Controllers. + +Supported Cards: +---------------- + +This driver is known to work with the following cards: + + * SA 5300 + * SA 5i + * SA 532 + * SA 5312 + * SA 641 + * SA 642 + * SA 6400 + * SA 6400 U320 Expansion Module + * SA 6i + * SA P600 + * SA P800 + * SA E400 + * SA P400i + * SA E200 + * SA E200i + * SA E500 + * SA P700m + * SA P212 + * SA P410 + * SA P410i + * SA P411 + * SA P812 + * SA P712m + * SA P711m + +Detecting drive failures: +------------------------- + +To get the status of logical volumes and to detect physical drive +failures, you can use the cciss_vol_status program found here: +http://cciss.sourceforge.net/#cciss_utils + +Device Naming: +-------------- + +If nodes are not already created in the /dev/cciss directory, run as root: + +# cd /dev +# ./MAKEDEV cciss + +You need some entries in /dev for the cciss device. The MAKEDEV script +can make device nodes for you automatically. Currently the device setup +is as follows: + +Major numbers: + 104 cciss0 + 105 cciss1 + 106 cciss2 + 105 cciss3 + 108 cciss4 + 109 cciss5 + 110 cciss6 + 111 cciss7 + +Minor numbers: + b7 b6 b5 b4 b3 b2 b1 b0 + |----+----| |----+----| + | | + | +-------- Partition ID (0=wholedev, 1-15 partition) + | + +-------------------- Logical Volume number + +The device naming scheme is: +/dev/cciss/c0d0 Controller 0, disk 0, whole device +/dev/cciss/c0d0p1 Controller 0, disk 0, partition 1 +/dev/cciss/c0d0p2 Controller 0, disk 0, partition 2 +/dev/cciss/c0d0p3 Controller 0, disk 0, partition 3 + +/dev/cciss/c1d1 Controller 1, disk 1, whole device +/dev/cciss/c1d1p1 Controller 1, disk 1, partition 1 +/dev/cciss/c1d1p2 Controller 1, disk 1, partition 2 +/dev/cciss/c1d1p3 Controller 1, disk 1, partition 3 + +SCSI tape drive and medium changer support +------------------------------------------ + +SCSI sequential access devices and medium changer devices are supported and +appropriate device nodes are automatically created. (e.g. +/dev/st0, /dev/st1, etc. See the "st" man page for more details.) +You must enable "SCSI tape drive support for Smart Array 5xxx" and +"SCSI support" in your kernel configuration to be able to use SCSI +tape drives with your Smart Array 5xxx controller. + +Additionally, note that the driver will not engage the SCSI core at init +time. The driver must be directed to dynamically engage the SCSI core via +the /proc filesystem entry which the "block" side of the driver creates as +/proc/driver/cciss/cciss* at runtime. This is because at driver init time, +the SCSI core may not yet be initialized (because the driver is a block +driver) and attempting to register it with the SCSI core in such a case +would cause a hang. This is best done via an initialization script +(typically in /etc/init.d, but could vary depending on distribution). +For example: + + for x in /proc/driver/cciss/cciss[0-9]* + do + echo "engage scsi" > $x + done + +Once the SCSI core is engaged by the driver, it cannot be disengaged +(except by unloading the driver, if it happens to be linked as a module.) + +Note also that if no sequential access devices or medium changers are +detected, the SCSI core will not be engaged by the action of the above +script. + +Hot plug support for SCSI tape drives +------------------------------------- + +Hot plugging of SCSI tape drives is supported, with some caveats. +The cciss driver must be informed that changes to the SCSI bus +have been made. This may be done via the /proc filesystem. +For example: + + echo "rescan" > /proc/scsi/cciss0/1 + +This causes the driver to query the adapter about changes to the +physical SCSI buses and/or fibre channel arbitrated loop and the +driver to make note of any new or removed sequential access devices +or medium changers. The driver will output messages indicating what +devices have been added or removed and the controller, bus, target and +lun used to address the device. It then notifies the SCSI mid layer +of these changes. + +Note that the naming convention of the /proc filesystem entries +contains a number in addition to the driver name. (E.g. "cciss0" +instead of just "cciss" which you might expect.) + +Note: ONLY sequential access devices and medium changers are presented +as SCSI devices to the SCSI mid layer by the cciss driver. Specifically, +physical SCSI disk drives are NOT presented to the SCSI mid layer. The +physical SCSI disk drives are controlled directly by the array controller +hardware and it is important to prevent the kernel from attempting to directly +access these devices too, as if the array controller were merely a SCSI +controller in the same way that we are allowing it to access SCSI tape drives. + +SCSI error handling for tape drives and medium changers +------------------------------------------------------- + +The linux SCSI mid layer provides an error handling protocol which +kicks into gear whenever a SCSI command fails to complete within a +certain amount of time (which can vary depending on the command). +The cciss driver participates in this protocol to some extent. The +normal protocol is a four step process. First the device is told +to abort the command. If that doesn't work, the device is reset. +If that doesn't work, the SCSI bus is reset. If that doesn't work +the host bus adapter is reset. Because the cciss driver is a block +driver as well as a SCSI driver and only the tape drives and medium +changers are presented to the SCSI mid layer, and unlike more +straightforward SCSI drivers, disk i/o continues through the block +side during the SCSI error recovery process, the cciss driver only +implements the first two of these actions, aborting the command, and +resetting the device. Additionally, most tape drives will not oblige +in aborting commands, and sometimes it appears they will not even +obey a reset command, though in most circumstances they will. In +the case that the command cannot be aborted and the device cannot be +reset, the device will be set offline. + +In the event the error handling code is triggered and a tape drive is +successfully reset or the tardy command is successfully aborted, the +tape drive may still not allow i/o to continue until some command +is issued which positions the tape to a known position. Typically you +must rewind the tape (by issuing "mt -f /dev/st0 rewind" for example) +before i/o can proceed again to a tape drive which was reset. + diff --git a/Documentation/blockdev/cpqarray.txt b/Documentation/blockdev/cpqarray.txt new file mode 100644 index 00000000000..c7154e20ef5 --- /dev/null +++ b/Documentation/blockdev/cpqarray.txt @@ -0,0 +1,93 @@ +This driver is for Compaq's SMART2 Intelligent Disk Array Controllers. + +Supported Cards: +---------------- + +This driver is known to work with the following cards: + + * SMART (EISA) + * SMART-2/E (EISA) + * SMART-2/P + * SMART-2DH + * SMART-2SL + * SMART-221 + * SMART-3100ES + * SMART-3200 + * Integrated Smart Array Controller + * SA 4200 + * SA 4250ES + * SA 431 + * RAID LC2 Controller + +It should also work with some really old Disk array adapters, but I am +unable to test against these cards: + + * IDA + * IDA-2 + * IAES + + +EISA Controllers: +----------------- + +If you want to use an EISA controller you'll have to supply some +modprobe/lilo parameters. If the driver is compiled into the kernel, must +give it the controller's IO port address at boot time (it is not +necessary to specify the IRQ). For example, if you had two SMART-2/E +controllers, in EISA slots 1 and 2 you'd give it a boot argument like +this: + + smart2=0x1000,0x2000 + +If you were loading the driver as a module, you'd give load it like this: + + modprobe cpqarray eisa=0x1000,0x2000 + +You can use EISA and PCI adapters at the same time. + + +Device Naming: +-------------- + +You need some entries in /dev for the ida device. MAKEDEV in the /dev +directory can make device nodes for you automatically. The device setup is +as follows: + +Major numbers: + 72 ida0 + 73 ida1 + 74 ida2 + 75 ida3 + 76 ida4 + 77 ida5 + 78 ida6 + 79 ida7 + +Minor numbers: + b7 b6 b5 b4 b3 b2 b1 b0 + |----+----| |----+----| + | | + | +-------- Partition ID (0=wholedev, 1-15 partition) + | + +-------------------- Logical Volume number + +The device naming scheme is: +/dev/ida/c0d0 Controller 0, disk 0, whole device +/dev/ida/c0d0p1 Controller 0, disk 0, partition 1 +/dev/ida/c0d0p2 Controller 0, disk 0, partition 2 +/dev/ida/c0d0p3 Controller 0, disk 0, partition 3 + +/dev/ida/c1d1 Controller 1, disk 1, whole device +/dev/ida/c1d1p1 Controller 1, disk 1, partition 1 +/dev/ida/c1d1p2 Controller 1, disk 1, partition 2 +/dev/ida/c1d1p3 Controller 1, disk 1, partition 3 + + +Changelog: +========== + +10-28-2004 : General cleanup, syntax fixes for in-kernel driver version. + James Nelson + + +1999 : Original Document diff --git a/Documentation/blockdev/floppy.txt b/Documentation/blockdev/floppy.txt new file mode 100644 index 00000000000..6ccab88705c --- /dev/null +++ b/Documentation/blockdev/floppy.txt @@ -0,0 +1,245 @@ +This file describes the floppy driver. + +FAQ list: +========= + + A FAQ list may be found in the fdutils package (see below), and also +at . + + +LILO configuration options (Thinkpad users, read this) +====================================================== + + The floppy driver is configured using the 'floppy=' option in +lilo. This option can be typed at the boot prompt, or entered in the +lilo configuration file. + + Example: If your kernel is called linux-2.6.9, type the following line +at the lilo boot prompt (if you have a thinkpad): + + linux-2.6.9 floppy=thinkpad + +You may also enter the following line in /etc/lilo.conf, in the description +of linux-2.6.9: + + append = "floppy=thinkpad" + + Several floppy related options may be given, example: + + linux-2.6.9 floppy=daring floppy=two_fdc + append = "floppy=daring floppy=two_fdc" + + If you give options both in the lilo config file and on the boot +prompt, the option strings of both places are concatenated, the boot +prompt options coming last. That's why there are also options to +restore the default behavior. + + +Module configuration options +============================ + + If you use the floppy driver as a module, use the following syntax: +modprobe floppy + +Example: + modprobe floppy omnibook messages + + If you need certain options enabled every time you load the floppy driver, +you can put: + + options floppy omnibook messages + +in /etc/modprobe.conf. + + + The floppy driver related options are: + + floppy=asus_pci + Sets the bit mask to allow only units 0 and 1. (default) + + floppy=daring + Tells the floppy driver that you have a well behaved floppy controller. + This allows more efficient and smoother operation, but may fail on + certain controllers. This may speed up certain operations. + + floppy=0,daring + Tells the floppy driver that your floppy controller should be used + with caution. + + floppy=one_fdc + Tells the floppy driver that you have only one floppy controller. + (default) + + floppy=two_fdc + floppy=
,two_fdc + Tells the floppy driver that you have two floppy controllers. + The second floppy controller is assumed to be at
. + This option is not needed if the second controller is at address + 0x370, and if you use the 'cmos' option. + + floppy=thinkpad + Tells the floppy driver that you have a Thinkpad. Thinkpads use an + inverted convention for the disk change line. + + floppy=0,thinkpad + Tells the floppy driver that you don't have a Thinkpad. + + floppy=omnibook + floppy=nodma + Tells the floppy driver not to use Dma for data transfers. + This is needed on HP Omnibooks, which don't have a workable + DMA channel for the floppy driver. This option is also useful + if you frequently get "Unable to allocate DMA memory" messages. + Indeed, dma memory needs to be continuous in physical memory, + and is thus harder to find, whereas non-dma buffers may be + allocated in virtual memory. However, I advise against this if + you have an FDC without a FIFO (8272A or 82072). 82072A and + later are OK. You also need at least a 486 to use nodma. + If you use nodma mode, I suggest you also set the FIFO + threshold to 10 or lower, in order to limit the number of data + transfer interrupts. + + If you have a FIFO-able FDC, the floppy driver automatically + falls back on non DMA mode if no DMA-able memory can be found. + If you want to avoid this, explicitly ask for 'yesdma'. + + floppy=yesdma + Tells the floppy driver that a workable DMA channel is available. + (default) + + floppy=nofifo + Disables the FIFO entirely. This is needed if you get "Bus + master arbitration error" messages from your Ethernet card (or + from other devices) while accessing the floppy. + + floppy=usefifo + Enables the FIFO. (default) + + floppy=,fifo_depth + Sets the FIFO threshold. This is mostly relevant in DMA + mode. If this is higher, the floppy driver tolerates more + interrupt latency, but it triggers more interrupts (i.e. it + imposes more load on the rest of the system). If this is + lower, the interrupt latency should be lower too (faster + processor). The benefit of a lower threshold is less + interrupts. + + To tune the fifo threshold, switch on over/underrun messages + using 'floppycontrol --messages'. Then access a floppy + disk. If you get a huge amount of "Over/Underrun - retrying" + messages, then the fifo threshold is too low. Try with a + higher value, until you only get an occasional Over/Underrun. + It is a good idea to compile the floppy driver as a module + when doing this tuning. Indeed, it allows to try different + fifo values without rebooting the machine for each test. Note + that you need to do 'floppycontrol --messages' every time you + re-insert the module. + + Usually, tuning the fifo threshold should not be needed, as + the default (0xa) is reasonable. + + floppy=,,cmos + Sets the CMOS type of to . This is mandatory if + you have more than two floppy drives (only two can be + described in the physical CMOS), or if your BIOS uses + non-standard CMOS types. The CMOS types are: + + 0 - Use the value of the physical CMOS + 1 - 5 1/4 DD + 2 - 5 1/4 HD + 3 - 3 1/2 DD + 4 - 3 1/2 HD + 5 - 3 1/2 ED + 6 - 3 1/2 ED + 16 - unknown or not installed + + (Note: there are two valid types for ED drives. This is because 5 was + initially chosen to represent floppy *tapes*, and 6 for ED drives. + AMI ignored this, and used 5 for ED drives. That's why the floppy + driver handles both.) + + floppy=unexpected_interrupts + Print a warning message when an unexpected interrupt is received. + (default) + + floppy=no_unexpected_interrupts + floppy=L40SX + Don't print a message when an unexpected interrupt is received. This + is needed on IBM L40SX laptops in certain video modes. (There seems + to be an interaction between video and floppy. The unexpected + interrupts affect only performance, and can be safely ignored.) + + floppy=broken_dcl + Don't use the disk change line, but assume that the disk was + changed whenever the device node is reopened. Needed on some + boxes where the disk change line is broken or unsupported. + This should be regarded as a stopgap measure, indeed it makes + floppy operation less efficient due to unneeded cache + flushings, and slightly more unreliable. Please verify your + cable, connection and jumper settings if you have any DCL + problems. However, some older drives, and also some laptops + are known not to have a DCL. + + floppy=debug + Print debugging messages. + + floppy=messages + Print informational messages for some operations (disk change + notifications, warnings about over and underruns, and about + autodetection). + + floppy=silent_dcl_clear + Uses a less noisy way to clear the disk change line (which + doesn't involve seeks). Implied by 'daring' option. + + floppy=,irq + Sets the floppy IRQ to instead of 6. + + floppy=,dma + Sets the floppy DMA channel to instead of 2. + + floppy=slow + Use PS/2 stepping rate: + " PS/2 floppies have much slower step rates than regular floppies. + It's been recommended that take about 1/4 of the default speed + in some more extreme cases." + + +Supporting utilities and additional documentation: +================================================== + + Additional parameters of the floppy driver can be configured at +runtime. Utilities which do this can be found in the fdutils package. +This package also contains a new version of mtools which allows to +access high capacity disks (up to 1992K on a high density 3 1/2 disk!). +It also contains additional documentation about the floppy driver. + +The latest version can be found at fdutils homepage: + http://fdutils.linux.lu + +The fdutils releases can be found at: + http://fdutils.linux.lu/download.html + http://www.tux.org/pub/knaff/fdutils/ + ftp://metalab.unc.edu/pub/Linux/utils/disk-management/ + +Reporting problems about the floppy driver +========================================== + + If you have a question or a bug report about the floppy driver, mail +me at Alain.Knaff@poboxes.com . If you post to Usenet, preferably use +comp.os.linux.hardware. As the volume in these groups is rather high, +be sure to include the word "floppy" (or "FLOPPY") in the subject +line. If the reported problem happens when mounting floppy disks, be +sure to mention also the type of the filesystem in the subject line. + + Be sure to read the FAQ before mailing/posting any bug reports! + + Alain + +Changelog +========= + +10-30-2004 : Cleanup, updating, add reference to module configuration. + James Nelson + +6-3-2000 : Original Document diff --git a/Documentation/blockdev/nbd.txt b/Documentation/blockdev/nbd.txt new file mode 100644 index 00000000000..aeb93ffe641 --- /dev/null +++ b/Documentation/blockdev/nbd.txt @@ -0,0 +1,47 @@ + Network Block Device (TCP version) + + What is it: With this compiled in the kernel (or as a module), Linux + can use a remote server as one of its block devices. So every time + the client computer wants to read, e.g., /dev/nb0, it sends a + request over TCP to the server, which will reply with the data read. + This can be used for stations with low disk space (or even diskless - + if you boot from floppy) to borrow disk space from another computer. + Unlike NFS, it is possible to put any filesystem on it, etc. It should + even be possible to use NBD as a root filesystem (I've never tried), + but it requires a user-level program to be in the initrd to start. + It also allows you to run block-device in user land (making server + and client physically the same computer, communicating using loopback). + + Current state: It currently works. Network block device is stable. + I originally thought that it was impossible to swap over TCP. It + turned out not to be true - swapping over TCP now works and seems + to be deadlock-free, but it requires heavy patches into Linux's + network layer. + + For more information, or to download the nbd-client and nbd-server + tools, go to http://nbd.sf.net/. + + Howto: To setup nbd, you can simply do the following: + + First, serve a device or file from a remote server: + + nbd-server + + e.g., + root@server1 # nbd-server 1234 /dev/sdb1 + + (serves sdb1 partition on TCP port 1234) + + Then, on the local (client) system: + + nbd-client /dev/nb[0-n] + + e.g., + root@client1 # nbd-client server1 1234 /dev/nb0 + + (creates the nb0 device on client1) + + The nbd kernel module need only be installed on the client + system, as the nbd-server is completely in userspace. In fact, + the nbd-server has been successfully ported to other operating + systems, including Windows. diff --git a/Documentation/blockdev/paride.txt b/Documentation/blockdev/paride.txt new file mode 100644 index 00000000000..e4312676bdd --- /dev/null +++ b/Documentation/blockdev/paride.txt @@ -0,0 +1,417 @@ + + Linux and parallel port IDE devices + +PARIDE v1.03 (c) 1997-8 Grant Guenther + +1. Introduction + +Owing to the simplicity and near universality of the parallel port interface +to personal computers, many external devices such as portable hard-disk, +CD-ROM, LS-120 and tape drives use the parallel port to connect to their +host computer. While some devices (notably scanners) use ad-hoc methods +to pass commands and data through the parallel port interface, most +external devices are actually identical to an internal model, but with +a parallel-port adapter chip added in. Some of the original parallel port +adapters were little more than mechanisms for multiplexing a SCSI bus. +(The Iomega PPA-3 adapter used in the ZIP drives is an example of this +approach). Most current designs, however, take a different approach. +The adapter chip reproduces a small ISA or IDE bus in the external device +and the communication protocol provides operations for reading and writing +device registers, as well as data block transfer functions. Sometimes, +the device being addressed via the parallel cable is a standard SCSI +controller like an NCR 5380. The "ditto" family of external tape +drives use the ISA replicator to interface a floppy disk controller, +which is then connected to a floppy-tape mechanism. The vast majority +of external parallel port devices, however, are now based on standard +IDE type devices, which require no intermediate controller. If one +were to open up a parallel port CD-ROM drive, for instance, one would +find a standard ATAPI CD-ROM drive, a power supply, and a single adapter +that interconnected a standard PC parallel port cable and a standard +IDE cable. It is usually possible to exchange the CD-ROM device with +any other device using the IDE interface. + +The document describes the support in Linux for parallel port IDE +devices. It does not cover parallel port SCSI devices, "ditto" tape +drives or scanners. Many different devices are supported by the +parallel port IDE subsystem, including: + + MicroSolutions backpack CD-ROM + MicroSolutions backpack PD/CD + MicroSolutions backpack hard-drives + MicroSolutions backpack 8000t tape drive + SyQuest EZ-135, EZ-230 & SparQ drives + Avatar Shark + Imation Superdisk LS-120 + Maxell Superdisk LS-120 + FreeCom Power CD + Hewlett-Packard 5GB and 8GB tape drives + Hewlett-Packard 7100 and 7200 CD-RW drives + +as well as most of the clone and no-name products on the market. + +To support such a wide range of devices, PARIDE, the parallel port IDE +subsystem, is actually structured in three parts. There is a base +paride module which provides a registry and some common methods for +accessing the parallel ports. The second component is a set of +high-level drivers for each of the different types of supported devices: + + pd IDE disk + pcd ATAPI CD-ROM + pf ATAPI disk + pt ATAPI tape + pg ATAPI generic + +(Currently, the pg driver is only used with CD-R drives). + +The high-level drivers function according to the relevant standards. +The third component of PARIDE is a set of low-level protocol drivers +for each of the parallel port IDE adapter chips. Thanks to the interest +and encouragement of Linux users from many parts of the world, +support is available for almost all known adapter protocols: + + aten ATEN EH-100 (HK) + bpck Microsolutions backpack (US) + comm DataStor (old-type) "commuter" adapter (TW) + dstr DataStor EP-2000 (TW) + epat Shuttle EPAT (UK) + epia Shuttle EPIA (UK) + fit2 FIT TD-2000 (US) + fit3 FIT TD-3000 (US) + friq Freecom IQ cable (DE) + frpw Freecom Power (DE) + kbic KingByte KBIC-951A and KBIC-971A (TW) + ktti KT Technology PHd adapter (SG) + on20 OnSpec 90c20 (US) + on26 OnSpec 90c26 (US) + + +2. Using the PARIDE subsystem + +While configuring the Linux kernel, you may choose either to build +the PARIDE drivers into your kernel, or to build them as modules. + +In either case, you will need to select "Parallel port IDE device support" +as well as at least one of the high-level drivers and at least one +of the parallel port communication protocols. If you do not know +what kind of parallel port adapter is used in your drive, you could +begin by checking the file names and any text files on your DOS +installation floppy. Alternatively, you can look at the markings on +the adapter chip itself. That's usually sufficient to identify the +correct device. + +You can actually select all the protocol modules, and allow the PARIDE +subsystem to try them all for you. + +For the "brand-name" products listed above, here are the protocol +and high-level drivers that you would use: + + Manufacturer Model Driver Protocol + + MicroSolutions CD-ROM pcd bpck + MicroSolutions PD drive pf bpck + MicroSolutions hard-drive pd bpck + MicroSolutions 8000t tape pt bpck + SyQuest EZ, SparQ pd epat + Imation Superdisk pf epat + Maxell Superdisk pf friq + Avatar Shark pd epat + FreeCom CD-ROM pcd frpw + Hewlett-Packard 5GB Tape pt epat + Hewlett-Packard 7200e (CD) pcd epat + Hewlett-Packard 7200e (CD-R) pg epat + +2.1 Configuring built-in drivers + +We recommend that you get to know how the drivers work and how to +configure them as loadable modules, before attempting to compile a +kernel with the drivers built-in. + +If you built all of your PARIDE support directly into your kernel, +and you have just a single parallel port IDE device, your kernel should +locate it automatically for you. If you have more than one device, +you may need to give some command line options to your bootloader +(eg: LILO), how to do that is beyond the scope of this document. + +The high-level drivers accept a number of command line parameters, all +of which are documented in the source files in linux/drivers/block/paride. +By default, each driver will automatically try all parallel ports it +can find, and all protocol types that have been installed, until it finds +a parallel port IDE adapter. Once it finds one, the probe stops. So, +if you have more than one device, you will need to tell the drivers +how to identify them. This requires specifying the port address, the +protocol identification number and, for some devices, the drive's +chain ID. While your system is booting, a number of messages are +displayed on the console. Like all such messages, they can be +reviewed with the 'dmesg' command. Among those messages will be +some lines like: + + paride: bpck registered as protocol 0 + paride: epat registered as protocol 1 + +The numbers will always be the same until you build a new kernel with +different protocol selections. You should note these numbers as you +will need them to identify the devices. + +If you happen to be using a MicroSolutions backpack device, you will +also need to know the unit ID number for each drive. This is usually +the last two digits of the drive's serial number (but read MicroSolutions' +documentation about this). + +As an example, let's assume that you have a MicroSolutions PD/CD drive +with unit ID number 36 connected to the parallel port at 0x378, a SyQuest +EZ-135 connected to the chained port on the PD/CD drive and also an +Imation Superdisk connected to port 0x278. You could give the following +options on your boot command: + + pd.drive0=0x378,1 pf.drive0=0x278,1 pf.drive1=0x378,0,36 + +In the last option, pf.drive1 configures device /dev/pf1, the 0x378 +is the parallel port base address, the 0 is the protocol registration +number and 36 is the chain ID. + +Please note: while PARIDE will work both with and without the +PARPORT parallel port sharing system that is included by the +"Parallel port support" option, PARPORT must be included and enabled +if you want to use chains of devices on the same parallel port. + +2.2 Loading and configuring PARIDE as modules + +It is much faster and simpler to get to understand the PARIDE drivers +if you use them as loadable kernel modules. + +Note 1: using these drivers with the "kerneld" automatic module loading +system is not recommended for beginners, and is not documented here. + +Note 2: if you build PARPORT support as a loadable module, PARIDE must +also be built as loadable modules, and PARPORT must be loaded before the +PARIDE modules. + +To use PARIDE, you must begin by + + insmod paride + +this loads a base module which provides a registry for the protocols, +among other tasks. + +Then, load as many of the protocol modules as you think you might need. +As you load each module, it will register the protocols that it supports, +and print a log message to your kernel log file and your console. For +example: + + # insmod epat + paride: epat registered as protocol 0 + # insmod kbic + paride: k951 registered as protocol 1 + paride: k971 registered as protocol 2 + +Finally, you can load high-level drivers for each kind of device that +you have connected. By default, each driver will autoprobe for a single +device, but you can support up to four similar devices by giving their +individual co-ordinates when you load the driver. + +For example, if you had two no-name CD-ROM drives both using the +KingByte KBIC-951A adapter, one on port 0x378 and the other on 0x3bc +you could give the following command: + + # insmod pcd drive0=0x378,1 drive1=0x3bc,1 + +For most adapters, giving a port address and protocol number is sufficient, +but check the source files in linux/drivers/block/paride for more +information. (Hopefully someone will write some man pages one day !). + +As another example, here's what happens when PARPORT is installed, and +a SyQuest EZ-135 is attached to port 0x378: + + # insmod paride + paride: version 1.0 installed + # insmod epat + paride: epat registered as protocol 0 + # insmod pd + pd: pd version 1.0, major 45, cluster 64, nice 0 + pda: Sharing parport1 at 0x378 + pda: epat 1.0, Shuttle EPAT chip c3 at 0x378, mode 5 (EPP-32), delay 1 + pda: SyQuest EZ135A, 262144 blocks [128M], (512/16/32), removable media + pda: pda1 + +Note that the last line is the output from the generic partition table +scanner - in this case it reports that it has found a disk with one partition. + +2.3 Using a PARIDE device + +Once the drivers have been loaded, you can access PARIDE devices in the +same way as their traditional counterparts. You will probably need to +create the device "special files". Here is a simple script that you can +cut to a file and execute: + +#!/bin/bash +# +# mkd -- a script to create the device special files for the PARIDE subsystem +# +function mkdev { + mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1 +} +# +function pd { + D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) ) + mkdev pd$D b 45 $[ $1 * 16 ] + for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + do mkdev pd$D$P b 45 $[ $1 * 16 + $P ] + done +} +# +cd /dev +# +for u in 0 1 2 3 ; do pd $u ; done +for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done +for u in 0 1 2 3 ; do mkdev pf$u b 47 $u ; done +for u in 0 1 2 3 ; do mkdev pt$u c 96 $u ; done +for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done +for u in 0 1 2 3 ; do mkdev pg$u c 97 $u ; done +# +# end of mkd + +With the device files and drivers in place, you can access PARIDE devices +like any other Linux device. For example, to mount a CD-ROM in pcd0, use: + + mount /dev/pcd0 /cdrom + +If you have a fresh Avatar Shark cartridge, and the drive is pda, you +might do something like: + + fdisk /dev/pda -- make a new partition table with + partition 1 of type 83 + + mke2fs /dev/pda1 -- to build the file system + + mkdir /shark -- make a place to mount the disk + + mount /dev/pda1 /shark + +Devices like the Imation superdisk work in the same way, except that +they do not have a partition table. For example to make a 120MB +floppy that you could share with a DOS system: + + mkdosfs /dev/pf0 + mount /dev/pf0 /mnt + + +2.4 The pf driver + +The pf driver is intended for use with parallel port ATAPI disk +devices. The most common devices in this category are PD drives +and LS-120 drives. Traditionally, media for these devices are not +partitioned. Consequently, the pf driver does not support partitioned +media. This may be changed in a future version of the driver. + +2.5 Using the pt driver + +The pt driver for parallel port ATAPI tape drives is a minimal driver. +It does not yet support many of the standard tape ioctl operations. +For best performance, a block size of 32KB should be used. You will +probably want to set the parallel port delay to 0, if you can. + +2.6 Using the pg driver + +The pg driver can be used in conjunction with the cdrecord program +to create CD-ROMs. Please get cdrecord version 1.6.1 or later +from ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/ . To record CD-R media +your parallel port should ideally be set to EPP mode, and the "port delay" +should be set to 0. With those settings it is possible to record at 2x +speed without any buffer underruns. If you cannot get the driver to work +in EPP mode, try to use "bidirectional" or "PS/2" mode and 1x speeds only. + + +3. Troubleshooting + +3.1 Use EPP mode if you can + +The most common problems that people report with the PARIDE drivers +concern the parallel port CMOS settings. At this time, none of the +PARIDE protocol modules support ECP mode, or any ECP combination modes. +If you are able to do so, please set your parallel port into EPP mode +using your CMOS setup procedure. + +3.2 Check the port delay + +Some parallel ports cannot reliably transfer data at full speed. To +offset the errors, the PARIDE protocol modules introduce a "port +delay" between each access to the i/o ports. Each protocol sets +a default value for this delay. In most cases, the user can override +the default and set it to 0 - resulting in somewhat higher transfer +rates. In some rare cases (especially with older 486 systems) the +default delays are not long enough. if you experience corrupt data +transfers, or unexpected failures, you may wish to increase the +port delay. The delay can be programmed using the "driveN" parameters +to each of the high-level drivers. Please see the notes above, or +read the comments at the beginning of the driver source files in +linux/drivers/block/paride. + +3.3 Some drives need a printer reset + +There appear to be a number of "noname" external drives on the market +that do not always power up correctly. We have noticed this with some +drives based on OnSpec and older Freecom adapters. In these rare cases, +the adapter can often be reinitialised by issuing a "printer reset" on +the parallel port. As the reset operation is potentially disruptive in +multiple device environments, the PARIDE drivers will not do it +automatically. You can however, force a printer reset by doing: + + insmod lp reset=1 + rmmod lp + +If you have one of these marginal cases, you should probably build +your paride drivers as modules, and arrange to do the printer reset +before loading the PARIDE drivers. + +3.4 Use the verbose option and dmesg if you need help + +While a lot of testing has gone into these drivers to make them work +as smoothly as possible, problems will arise. If you do have problems, +please check all the obvious things first: does the drive work in +DOS with the manufacturer's drivers ? If that doesn't yield any useful +clues, then please make sure that only one drive is hooked to your system, +and that either (a) PARPORT is enabled or (b) no other device driver +is using your parallel port (check in /proc/ioports). Then, load the +appropriate drivers (you can load several protocol modules if you want) +as in: + + # insmod paride + # insmod epat + # insmod bpck + # insmod kbic + ... + # insmod pd verbose=1 + +(using the correct driver for the type of device you have, of course). +The verbose=1 parameter will cause the drivers to log a trace of their +activity as they attempt to locate your drive. + +Use 'dmesg' to capture a log of all the PARIDE messages (any messages +beginning with paride:, a protocol module's name or a driver's name) and +include that with your bug report. You can submit a bug report in one +of two ways. Either send it directly to the author of the PARIDE suite, +by e-mail to grant@torque.net, or join the linux-parport mailing list +and post your report there. + +3.5 For more information or help + +You can join the linux-parport mailing list by sending a mail message +to + linux-parport-request@torque.net + +with the single word + + subscribe + +in the body of the mail message (not in the subject line). Please be +sure that your mail program is correctly set up when you do this, as +the list manager is a robot that will subscribe you using the reply +address in your mail headers. REMOVE any anti-spam gimmicks you may +have in your mail headers, when sending mail to the list server. + +You might also find some useful information on the linux-parport +web pages (although they are not always up to date) at + + http://www.torque.net/parport/ + + diff --git a/Documentation/blockdev/ramdisk.txt b/Documentation/blockdev/ramdisk.txt new file mode 100644 index 00000000000..6c820baa19a --- /dev/null +++ b/Documentation/blockdev/ramdisk.txt @@ -0,0 +1,165 @@ +Using the RAM disk block device with Linux +------------------------------------------ + +Contents: + + 1) Overview + 2) Kernel Command Line Parameters + 3) Using "rdev -r" + 4) An Example of Creating a Compressed RAM Disk + + +1) Overview +----------- + +The RAM disk driver is a way to use main system memory as a block device. It +is required for initrd, an initial filesystem used if you need to load modules +in order to access the root filesystem (see Documentation/initrd.txt). It can +also be used for a temporary filesystem for crypto work, since the contents +are erased on reboot. + +The RAM disk dynamically grows as more space is required. It does this by using +RAM from the buffer cache. The driver marks the buffers it is using as dirty +so that the VM subsystem does not try to reclaim them later. + +The RAM disk supports up to 16 RAM disks by default, and can be reconfigured +to support an unlimited number of RAM disks (at your own risk). Just change +the configuration symbol BLK_DEV_RAM_COUNT in the Block drivers config menu +and (re)build the kernel. + +To use RAM disk support with your system, run './MAKEDEV ram' from the /dev +directory. RAM disks are all major number 1, and start with minor number 0 +for /dev/ram0, etc. If used, modern kernels use /dev/ram0 for an initrd. + +The new RAM disk also has the ability to load compressed RAM disk images, +allowing one to squeeze more programs onto an average installation or +rescue floppy disk. + + +2) Kernel Command Line Parameters +--------------------------------- + + ramdisk_size=N + ============== + +This parameter tells the RAM disk driver to set up RAM disks of N k size. The +default is 4096 (4 MB) (8192 (8 MB) on S390). + + ramdisk_blocksize=N + =================== + +This parameter tells the RAM disk driver how many bytes to use per block. The +default is 1024 (BLOCK_SIZE). + + +3) Using "rdev -r" +------------------ + +The usage of the word (two bytes) that "rdev -r" sets in the kernel image is +as follows. The low 11 bits (0 -> 10) specify an offset (in 1 k blocks) of up +to 2 MB (2^11) of where to find the RAM disk (this used to be the size). Bit +14 indicates that a RAM disk is to be loaded, and bit 15 indicates whether a +prompt/wait sequence is to be given before trying to read the RAM disk. Since +the RAM disk dynamically grows as data is being written into it, a size field +is not required. Bits 11 to 13 are not currently used and may as well be zero. +These numbers are no magical secrets, as seen below: + +./arch/i386/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK 0x07FF +./arch/i386/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000 +./arch/i386/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000 + +Consider a typical two floppy disk setup, where you will have the +kernel on disk one, and have already put a RAM disk image onto disk #2. + +Hence you want to set bits 0 to 13 as 0, meaning that your RAM disk +starts at an offset of 0 kB from the beginning of the floppy. +The command line equivalent is: "ramdisk_start=0" + +You want bit 14 as one, indicating that a RAM disk is to be loaded. +The command line equivalent is: "load_ramdisk=1" + +You want bit 15 as one, indicating that you want a prompt/keypress +sequence so that you have a chance to switch floppy disks. +The command line equivalent is: "prompt_ramdisk=1" + +Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word. +So to create disk one of the set, you would do: + + /usr/src/linux# cat arch/i386/boot/zImage > /dev/fd0 + /usr/src/linux# rdev /dev/fd0 /dev/fd0 + /usr/src/linux# rdev -r /dev/fd0 49152 + +If you make a boot disk that has LILO, then for the above, you would use: + append = "ramdisk_start=0 load_ramdisk=1 prompt_ramdisk=1" +Since the default start = 0 and the default prompt = 1, you could use: + append = "load_ramdisk=1" + + +4) An Example of Creating a Compressed RAM Disk +---------------------------------------------- + +To create a RAM disk image, you will need a spare block device to +construct it on. This can be the RAM disk device itself, or an +unused disk partition (such as an unmounted swap partition). For this +example, we will use the RAM disk device, "/dev/ram0". + +Note: This technique should not be done on a machine with less than 8 MB +of RAM. If using a spare disk partition instead of /dev/ram0, then this +restriction does not apply. + +a) Decide on the RAM disk size that you want. Say 2 MB for this example. + Create it by writing to the RAM disk device. (This step is not currently + required, but may be in the future.) It is wise to zero out the + area (esp. for disks) so that maximal compression is achieved for + the unused blocks of the image that you are about to create. + + dd if=/dev/zero of=/dev/ram0 bs=1k count=2048 + +b) Make a filesystem on it. Say ext2fs for this example. + + mke2fs -vm0 /dev/ram0 2048 + +c) Mount it, copy the files you want to it (eg: /etc/* /dev/* ...) + and unmount it again. + +d) Compress the contents of the RAM disk. The level of compression + will be approximately 50% of the space used by the files. Unused + space on the RAM disk will compress to almost nothing. + + dd if=/dev/ram0 bs=1k count=2048 | gzip -v9 > /tmp/ram_image.gz + +e) Put the kernel onto the floppy + + dd if=zImage of=/dev/fd0 bs=1k + +f) Put the RAM disk image onto the floppy, after the kernel. Use an offset + that is slightly larger than the kernel, so that you can put another + (possibly larger) kernel onto the same floppy later without overlapping + the RAM disk image. An offset of 400 kB for kernels about 350 kB in + size would be reasonable. Make sure offset+size of ram_image.gz is + not larger than the total space on your floppy (usually 1440 kB). + + dd if=/tmp/ram_image.gz of=/dev/fd0 bs=1k seek=400 + +g) Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc. + For prompt_ramdisk=1, load_ramdisk=1, ramdisk_start=400, one would + have 2^15 + 2^14 + 400 = 49552. + + rdev /dev/fd0 /dev/fd0 + rdev -r /dev/fd0 49552 + +That is it. You now have your boot/root compressed RAM disk floppy. Some +users may wish to combine steps (d) and (f) by using a pipe. + +-------------------------------------------------------------------------- + Paul Gortmaker 12/95 + +Changelog: +---------- + +10-22-04 : Updated to reflect changes in command line options, remove + obsolete references, general cleanup. + James Nelson (james4765@gmail.com) + + +12-95 : Original Document diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt deleted file mode 100644 index 89698e8df7d..00000000000 --- a/Documentation/cciss.txt +++ /dev/null @@ -1,171 +0,0 @@ -This driver is for Compaq's SMART Array Controllers. - -Supported Cards: ----------------- - -This driver is known to work with the following cards: - - * SA 5300 - * SA 5i - * SA 532 - * SA 5312 - * SA 641 - * SA 642 - * SA 6400 - * SA 6400 U320 Expansion Module - * SA 6i - * SA P600 - * SA P800 - * SA E400 - * SA P400i - * SA E200 - * SA E200i - * SA E500 - * SA P700m - * SA P212 - * SA P410 - * SA P410i - * SA P411 - * SA P812 - * SA P712m - * SA P711m - -Detecting drive failures: -------------------------- - -To get the status of logical volumes and to detect physical drive -failures, you can use the cciss_vol_status program found here: -http://cciss.sourceforge.net/#cciss_utils - -Device Naming: --------------- - -If nodes are not already created in the /dev/cciss directory, run as root: - -# cd /dev -# ./MAKEDEV cciss - -You need some entries in /dev for the cciss device. The MAKEDEV script -can make device nodes for you automatically. Currently the device setup -is as follows: - -Major numbers: - 104 cciss0 - 105 cciss1 - 106 cciss2 - 105 cciss3 - 108 cciss4 - 109 cciss5 - 110 cciss6 - 111 cciss7 - -Minor numbers: - b7 b6 b5 b4 b3 b2 b1 b0 - |----+----| |----+----| - | | - | +-------- Partition ID (0=wholedev, 1-15 partition) - | - +-------------------- Logical Volume number - -The device naming scheme is: -/dev/cciss/c0d0 Controller 0, disk 0, whole device -/dev/cciss/c0d0p1 Controller 0, disk 0, partition 1 -/dev/cciss/c0d0p2 Controller 0, disk 0, partition 2 -/dev/cciss/c0d0p3 Controller 0, disk 0, partition 3 - -/dev/cciss/c1d1 Controller 1, disk 1, whole device -/dev/cciss/c1d1p1 Controller 1, disk 1, partition 1 -/dev/cciss/c1d1p2 Controller 1, disk 1, partition 2 -/dev/cciss/c1d1p3 Controller 1, disk 1, partition 3 - -SCSI tape drive and medium changer support ------------------------------------------- - -SCSI sequential access devices and medium changer devices are supported and -appropriate device nodes are automatically created. (e.g. -/dev/st0, /dev/st1, etc. See the "st" man page for more details.) -You must enable "SCSI tape drive support for Smart Array 5xxx" and -"SCSI support" in your kernel configuration to be able to use SCSI -tape drives with your Smart Array 5xxx controller. - -Additionally, note that the driver will not engage the SCSI core at init -time. The driver must be directed to dynamically engage the SCSI core via -the /proc filesystem entry which the "block" side of the driver creates as -/proc/driver/cciss/cciss* at runtime. This is because at driver init time, -the SCSI core may not yet be initialized (because the driver is a block -driver) and attempting to register it with the SCSI core in such a case -would cause a hang. This is best done via an initialization script -(typically in /etc/init.d, but could vary depending on distribution). -For example: - - for x in /proc/driver/cciss/cciss[0-9]* - do - echo "engage scsi" > $x - done - -Once the SCSI core is engaged by the driver, it cannot be disengaged -(except by unloading the driver, if it happens to be linked as a module.) - -Note also that if no sequential access devices or medium changers are -detected, the SCSI core will not be engaged by the action of the above -script. - -Hot plug support for SCSI tape drives -------------------------------------- - -Hot plugging of SCSI tape drives is supported, with some caveats. -The cciss driver must be informed that changes to the SCSI bus -have been made. This may be done via the /proc filesystem. -For example: - - echo "rescan" > /proc/scsi/cciss0/1 - -This causes the driver to query the adapter about changes to the -physical SCSI buses and/or fibre channel arbitrated loop and the -driver to make note of any new or removed sequential access devices -or medium changers. The driver will output messages indicating what -devices have been added or removed and the controller, bus, target and -lun used to address the device. It then notifies the SCSI mid layer -of these changes. - -Note that the naming convention of the /proc filesystem entries -contains a number in addition to the driver name. (E.g. "cciss0" -instead of just "cciss" which you might expect.) - -Note: ONLY sequential access devices and medium changers are presented -as SCSI devices to the SCSI mid layer by the cciss driver. Specifically, -physical SCSI disk drives are NOT presented to the SCSI mid layer. The -physical SCSI disk drives are controlled directly by the array controller -hardware and it is important to prevent the kernel from attempting to directly -access these devices too, as if the array controller were merely a SCSI -controller in the same way that we are allowing it to access SCSI tape drives. - -SCSI error handling for tape drives and medium changers -------------------------------------------------------- - -The linux SCSI mid layer provides an error handling protocol which -kicks into gear whenever a SCSI command fails to complete within a -certain amount of time (which can vary depending on the command). -The cciss driver participates in this protocol to some extent. The -normal protocol is a four step process. First the device is told -to abort the command. If that doesn't work, the device is reset. -If that doesn't work, the SCSI bus is reset. If that doesn't work -the host bus adapter is reset. Because the cciss driver is a block -driver as well as a SCSI driver and only the tape drives and medium -changers are presented to the SCSI mid layer, and unlike more -straightforward SCSI drivers, disk i/o continues through the block -side during the SCSI error recovery process, the cciss driver only -implements the first two of these actions, aborting the command, and -resetting the device. Additionally, most tape drives will not oblige -in aborting commands, and sometimes it appears they will not even -obey a reset command, though in most circumstances they will. In -the case that the command cannot be aborted and the device cannot be -reset, the device will be set offline. - -In the event the error handling code is triggered and a tape drive is -successfully reset or the tardy command is successfully aborted, the -tape drive may still not allow i/o to continue until some command -is issued which positions the tape to a known position. Typically you -must rewind the tape (by issuing "mt -f /dev/st0 rewind" for example) -before i/o can proceed again to a tape drive which was reset. - diff --git a/Documentation/computone.txt b/Documentation/computone.txt deleted file mode 100644 index 5e2a0c76bfa..00000000000 --- a/Documentation/computone.txt +++ /dev/null @@ -1,522 +0,0 @@ -NOTE: This is an unmaintained driver. It is not guaranteed to work due to -changes made in the tty layer in 2.6. If you wish to take over maintenance of -this driver, contact Michael Warfield . - -Changelog: ----------- -11-01-2001: Original Document - -10-29-2004: Minor misspelling & format fix, update status of driver. - James Nelson - -Computone Intelliport II/Plus Multiport Serial Driver ------------------------------------------------------ - -Release Notes For Linux Kernel 2.2 and higher. -These notes are for the drivers which have already been integrated into the -kernel and have been tested on Linux kernels 2.0, 2.2, 2.3, and 2.4. - -Version: 1.2.14 -Date: 11/01/2001 -Historical Author: Andrew Manison -Primary Author: Doug McNash -Support: support@computone.com -Fixes and Updates: Mike Warfield - -This file assumes that you are using the Computone drivers which are -integrated into the kernel sources. For updating the drivers or installing -drivers into kernels which do not already have Computone drivers, please -refer to the instructions in the README.computone file in the driver patch. - - -1. INTRODUCTION - -This driver supports the entire family of Intelliport II/Plus controllers -with the exception of the MicroChannel controllers. It does not support -products previous to the Intelliport II. - -This driver was developed on the v2.0.x Linux tree and has been tested up -to v2.4.14; it will probably not work with earlier v1.X kernels,. - - -2. QUICK INSTALLATION - -Hardware - If you have an ISA card, find a free interrupt and io port. - List those in use with `cat /proc/interrupts` and - `cat /proc/ioports`. Set the card dip switches to a free - address. You may need to configure your BIOS to reserve an - irq for an ISA card. PCI and EISA parameters are set - automagically. Insert card into computer with the power off - before or after drivers installation. - - Note the hardware address from the Computone ISA cards installed into - the system. These are required for editing ip2.c or editing - /etc/modprobe.conf, or for specification on the modprobe - command line. - - Note that the /etc/modules.conf should be used for older (pre-2.6) - kernels. - -Software - - -Module installation: - -a) Determine free irq/address to use if any (configure BIOS if need be) -b) Run "make config" or "make menuconfig" or "make xconfig" - Select (m) module for CONFIG_COMPUTONE under character - devices. CONFIG_PCI and CONFIG_MODULES also may need to be set. -c) Set address on ISA cards then: - edit /usr/src/linux/drivers/char/ip2.c if needed - or - edit /etc/modprobe.conf if needed (module). - or both to match this setting. -d) Run "make modules" -e) Run "make modules_install" -f) Run "/sbin/depmod -a" -g) install driver using `modprobe ip2 ` (options listed below) -h) run ip2mkdev (either the script below or the binary version) - - -Kernel installation: - -a) Determine free irq/address to use if any (configure BIOS if need be) -b) Run "make config" or "make menuconfig" or "make xconfig" - Select (y) kernel for CONFIG_COMPUTONE under character - devices. CONFIG_PCI may need to be set if you have PCI bus. -c) Set address on ISA cards then: - edit /usr/src/linux/drivers/char/ip2.c - (Optional - may be specified on kernel command line now) -d) Run "make zImage" or whatever target you prefer. -e) mv /usr/src/linux/arch/i386/boot/zImage to /boot. -f) Add new config for this kernel into /etc/lilo.conf, run "lilo" - or copy to a floppy disk and boot from that floppy disk. -g) Reboot using this kernel -h) run ip2mkdev (either the script below or the binary version) - -Kernel command line options: - -When compiling the driver into the kernel, io and irq may be -compiled into the driver by editing ip2.c and setting the values for -io and irq in the appropriate array. An alternative is to specify -a command line parameter to the kernel at boot up. - - ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 - -Note that this order is very different from the specifications for the -modload parameters which have separate IRQ and IO specifiers. - -The io port also selects PCI (1) and EISA (2) boards. - - io=0 No board - io=1 PCI board - io=2 EISA board - else ISA board io address - -You only need to specify the boards which are present. - - Examples: - - 2 PCI boards: - - ip2=1,0,1,0 - - 1 ISA board at 0x310 irq 5: - - ip2=0x310,5 - -This can be added to and "append" option in lilo.conf similar to this: - - append="ip2=1,0,1,0" - - -3. INSTALLATION - -Previously, the driver sources were packaged with a set of patch files -to update the character drivers' makefile and configuration file, and other -kernel source files. A build script (ip2build) was included which applies -the patches if needed, and build any utilities needed. -What you receive may be a single patch file in conventional kernel -patch format build script. That form can also be applied by -running patch -p1 < ThePatchFile. Otherwise run ip2build. - -The driver can be installed as a module (recommended) or built into the -kernel. This is selected as for other drivers through the `make config` -command from the root of the Linux source tree. If the driver is built -into the kernel you will need to edit the file ip2.c to match the boards -you are installing. See that file for instructions. If the driver is -installed as a module the configuration can also be specified on the -modprobe command line as follows: - - modprobe ip2 irq=irq1,irq2,irq3,irq4 io=addr1,addr2,addr3,addr4 - -where irqnum is one of the valid Intelliport II interrupts (3,4,5,7,10,11, -12,15) and addr1-4 are the base addresses for up to four controllers. If -the irqs are not specified the driver uses the default in ip2.c (which -selects polled mode). If no base addresses are specified the defaults in -ip2.c are used. If you are autoloading the driver module with kerneld or -kmod the base addresses and interrupt number must also be set in ip2.c -and recompile or just insert and options line in /etc/modprobe.conf or both. -The options line is equivalent to the command line and takes precedence over -what is in ip2.c. - -/etc/modprobe.conf sample: - options ip2 io=1,0x328 irq=1,10 - alias char-major-71 ip2 - alias char-major-72 ip2 - alias char-major-73 ip2 - -The equivalent in ip2.c: - -static int io[IP2_MAX_BOARDS]= { 1, 0x328, 0, 0 }; -static int irq[IP2_MAX_BOARDS] = { 1, 10, -1, -1 }; - -The equivalent for the kernel command line (in lilo.conf): - - append="ip2=1,1,0x328,10" - - -Note: Both io and irq should be updated to reflect YOUR system. An "io" - address of 1 or 2 indicates a PCI or EISA card in the board table. - The PCI or EISA irq will be assigned automatically. - -Specifying an invalid or in-use irq will default the driver into -running in polled mode for that card. If all irq entries are 0 then -all cards will operate in polled mode. - -If you select the driver as part of the kernel run : - - make zlilo (or whatever you do to create a bootable kernel) - -If you selected a module run : - - make modules && make modules_install - -The utility ip2mkdev (see 5 and 7 below) creates all the device nodes -required by the driver. For a device to be created it must be configured -in the driver and the board must be installed. Only devices corresponding -to real IntelliPort II ports are created. With multiple boards and expansion -boxes this will leave gaps in the sequence of device names. ip2mkdev uses -Linux tty naming conventions: ttyF0 - ttyF255 for normal devices, and -cuf0 - cuf255 for callout devices. - - -4. USING THE DRIVERS - -As noted above, the driver implements the ports in accordance with Linux -conventions, and the devices should be interchangeable with the standard -serial devices. (This is a key point for problem reporting: please make -sure that what you are trying do works on the ttySx/cuax ports first; then -tell us what went wrong with the ip2 ports!) - -Higher speeds can be obtained using the setserial utility which remaps -38,400 bps (extb) to 57,600 bps, 115,200 bps, or a custom speed. -Intelliport II installations using the PowerPort expansion module can -use the custom speed setting to select the highest speeds: 153,600 bps, -230,400 bps, 307,200 bps, 460,800bps and 921,600 bps. The base for -custom baud rate configuration is fixed at 921,600 for cards/expansion -modules with ST654's and 115200 for those with Cirrus CD1400's. This -corresponds to the maximum bit rates those chips are capable. -For example if the baud base is 921600 and the baud divisor is 18 then -the custom rate is 921600/18 = 51200 bps. See the setserial man page for -complete details. Of course if stty accepts the higher rates now you can -use that as well as the standard ioctls(). - - -5. ip2mkdev and assorted utilities... - -Several utilities, including the source for a binary ip2mkdev utility are -available under .../drivers/char/ip2. These can be build by changing to -that directory and typing "make" after the kernel has be built. If you do -not wish to compile the binary utilities, the shell script below can be -cut out and run as "ip2mkdev" to create the necessary device files. To -use the ip2mkdev script, you must have procfs enabled and the proc file -system mounted on /proc. - - -6. NOTES - -This is a release version of the driver, but it is impossible to test it -in all configurations of Linux. If there is any anomalous behaviour that -does not match the standard serial port's behaviour please let us know. - - -7. ip2mkdev shell script - -Previously, this script was simply attached here. It is now attached as a -shar archive to make it easier to extract the script from the documentation. -To create the ip2mkdev shell script change to a convenient directory (/tmp -works just fine) and run the following command: - - unshar Documentation/computone.txt - (This file) - -You should now have a file ip2mkdev in your current working directory with -permissions set to execute. Running that script with then create the -necessary devices for the Computone boards, interfaces, and ports which -are present on you system at the time it is run. - - -#!/bin/sh -# This is a shell archive (produced by GNU sharutils 4.2.1). -# To extract the files from this archive, save it to some FILE, remove -# everything before the `!/bin/sh' line above, then type `sh FILE'. -# -# Made on 2001-10-29 10:32 EST by . -# Source directory was `/home2/src/tmp'. -# -# Existing files will *not* be overwritten unless `-c' is specified. -# -# This shar contains: -# length mode name -# ------ ---------- ------------------------------------------ -# 4251 -rwxr-xr-x ip2mkdev -# -save_IFS="${IFS}" -IFS="${IFS}:" -gettext_dir=FAILED -locale_dir=FAILED -first_param="$1" -for dir in $PATH -do - if test "$gettext_dir" = FAILED && test -f $dir/gettext \ - && ($dir/gettext --version >/dev/null 2>&1) - then - set `$dir/gettext --version 2>&1` - if test "$3" = GNU - then - gettext_dir=$dir - fi - fi - if test "$locale_dir" = FAILED && test -f $dir/shar \ - && ($dir/shar --print-text-domain-dir >/dev/null 2>&1) - then - locale_dir=`$dir/shar --print-text-domain-dir` - fi -done -IFS="$save_IFS" -if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED -then - echo=echo -else - TEXTDOMAINDIR=$locale_dir - export TEXTDOMAINDIR - TEXTDOMAIN=sharutils - export TEXTDOMAIN - echo="$gettext_dir/gettext -s" -fi -if touch -am -t 200112312359.59 $$.touch >/dev/null 2>&1 && test ! -f 200112312359.59 -a -f $$.touch; then - shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"' -elif touch -am 123123592001.59 $$.touch >/dev/null 2>&1 && test ! -f 123123592001.59 -a ! -f 123123592001.5 -a -f $$.touch; then - shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"' -elif touch -am 1231235901 $$.touch >/dev/null 2>&1 && test ! -f 1231235901 -a -f $$.touch; then - shar_touch='touch -am $3$4$5$6$2 "$8"' -else - shar_touch=: - echo - $echo 'WARNING: not restoring timestamps. Consider getting and' - $echo "installing GNU \`touch', distributed in GNU File Utilities..." - echo -fi -rm -f 200112312359.59 123123592001.59 123123592001.5 1231235901 $$.touch -# -if mkdir _sh17581; then - $echo 'x -' 'creating lock directory' -else - $echo 'failed to create lock directory' - exit 1 -fi -# ============= ip2mkdev ============== -if test -f 'ip2mkdev' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'ip2mkdev' '(file already exists)' -else - $echo 'x -' extracting 'ip2mkdev' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'ip2mkdev' && -#!/bin/sh - -# -# ip2mkdev -# -# Make or remove devices as needed for Computone Intelliport drivers -# -# First rule! If the dev file exists and you need it, don't mess -# with it. That prevents us from screwing up open ttys, ownership -# and permissions on a running system! -# -# This script will NOT remove devices that no longer exist if their -# board or interface box has been removed. If you want to get rid -# of them, you can manually do an "rm -f /dev/ttyF* /dev/cuaf*" -# before running this script. Running this script will then recreate -# all the valid devices. -# -# Michael H. Warfield -# /\/\|=mhw=|\/\/ -# mhw@wittsend.com -# -# Updated 10/29/2000 for version 1.2.13 naming convention -# under devfs. /\/\|=mhw=|\/\/ -# -# Updated 03/09/2000 for devfs support in ip2 drivers. /\/\|=mhw=|\/\/ -# -X -if test -d /dev/ip2 ; then -# This is devfs mode... We don't do anything except create symlinks -# from the real devices to the old names! -X cd /dev -X echo "Creating symbolic links to devfs devices" -X for i in `ls ip2` ; do -X if test ! -L ip2$i ; then -X # Remove it incase it wasn't a symlink (old device) -X rm -f ip2$i -X ln -s ip2/$i ip2$i -X fi -X done -X for i in `( cd tts ; ls F* )` ; do -X if test ! -L tty$i ; then -X # Remove it incase it wasn't a symlink (old device) -X rm -f tty$i -X ln -s tts/$i tty$i -X fi -X done -X for i in `( cd cua ; ls F* )` ; do -X DEVNUMBER=`expr $i : 'F\(.*\)'` -X if test ! -L cuf$DEVNUMBER ; then -X # Remove it incase it wasn't a symlink (old device) -X rm -f cuf$DEVNUMBER -X ln -s cua/$i cuf$DEVNUMBER -X fi -X done -X exit 0 -fi -X -if test ! -f /proc/tty/drivers -then -X echo "\ -Unable to check driver status. -Make sure proc file system is mounted." -X -X exit 255 -fi -X -if test ! -f /proc/tty/driver/ip2 -then -X echo "\ -Unable to locate ip2 proc file. -Attempting to load driver" -X -X if /sbin/insmod ip2 -X then -X if test ! -f /proc/tty/driver/ip2 -X then -X echo "\ -Unable to locate ip2 proc file after loading driver. -Driver initialization failure or driver version error. -" -X exit 255 -X fi -X else -X echo "Unable to load ip2 driver." -X exit 255 -X fi -fi -X -# Ok... So we got the driver loaded and we can locate the procfs files. -# Next we need our major numbers. -X -TTYMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/tt/!d' -e 's/.*tt[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` -CUAMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/cu/!d' -e 's/.*cu[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` -BRDMAJOR=`sed -e '/^Driver: /!d' -e 's/.*IMajor=\([0-9]*\)[ ]*.*/\1/' < /proc/tty/driver/ip2` -X -echo "\ -TTYMAJOR = $TTYMAJOR -CUAMAJOR = $CUAMAJOR -BRDMAJOR = $BRDMAJOR -" -X -# Ok... Now we should know our major numbers, if appropriate... -# Now we need our boards and start the device loops. -X -grep '^Board [0-9]:' /proc/tty/driver/ip2 | while read token number type alltherest -do -X # The test for blank "type" will catch the stats lead-in lines -X # if they exist in the file -X if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = "" -X then -X continue -X fi -X -X BOARDNO=`expr "$number" : '\([0-9]\):'` -X PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '` -X MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '` -X -X if test "$BOARDNO" = "" -o "$PORTS" = "" -X then -# This may be a bug. We should at least get this much information -X echo "Unable to process board line" -X continue -X fi -X -X if test "$MINORS" = "" -X then -# Silently skip this one. This board seems to have no boxes -X continue -X fi -X -X echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS" -X -X if test "$BRDMAJOR" != "" -X then -X BRDMINOR=`expr $BOARDNO \* 4` -X STSMINOR=`expr $BRDMINOR + 1` -X if test ! -c /dev/ip2ipl$BOARDNO ; then -X mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR -X fi -X if test ! -c /dev/ip2stat$BOARDNO ; then -X mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR -X fi -X fi -X -X if test "$TTYMAJOR" != "" -X then -X PORTNO=$BOARDBASE -X -X for PORTNO in $MINORS -X do -X if test ! -c /dev/ttyF$PORTNO ; then -X # We got the hardware but no device - make it -X mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO -X fi -X done -X fi -X -X if test "$CUAMAJOR" != "" -X then -X PORTNO=$BOARDBASE -X -X for PORTNO in $MINORS -X do -X if test ! -c /dev/cuf$PORTNO ; then -X # We got the hardware but no device - make it -X mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO -X fi -X done -X fi -done -X -Xexit 0 -SHAR_EOF - (set 20 01 10 29 10 32 01 'ip2mkdev'; eval "$shar_touch") && - chmod 0755 'ip2mkdev' || - $echo 'restore of' 'ip2mkdev' 'failed' - if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ - && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then - md5sum -c << SHAR_EOF >/dev/null 2>&1 \ - || $echo 'ip2mkdev:' 'MD5 check failed' -cb5717134509f38bad9fde6b1f79b4a4 ip2mkdev -SHAR_EOF - else - shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'ip2mkdev'`" - test 4251 -eq "$shar_count" || - $echo 'ip2mkdev:' 'original size' '4251,' 'current size' "$shar_count!" - fi -fi -rm -fr _sh17581 -exit 0 diff --git a/Documentation/cpqarray.txt b/Documentation/cpqarray.txt deleted file mode 100644 index c7154e20ef5..00000000000 --- a/Documentation/cpqarray.txt +++ /dev/null @@ -1,93 +0,0 @@ -This driver is for Compaq's SMART2 Intelligent Disk Array Controllers. - -Supported Cards: ----------------- - -This driver is known to work with the following cards: - - * SMART (EISA) - * SMART-2/E (EISA) - * SMART-2/P - * SMART-2DH - * SMART-2SL - * SMART-221 - * SMART-3100ES - * SMART-3200 - * Integrated Smart Array Controller - * SA 4200 - * SA 4250ES - * SA 431 - * RAID LC2 Controller - -It should also work with some really old Disk array adapters, but I am -unable to test against these cards: - - * IDA - * IDA-2 - * IAES - - -EISA Controllers: ------------------ - -If you want to use an EISA controller you'll have to supply some -modprobe/lilo parameters. If the driver is compiled into the kernel, must -give it the controller's IO port address at boot time (it is not -necessary to specify the IRQ). For example, if you had two SMART-2/E -controllers, in EISA slots 1 and 2 you'd give it a boot argument like -this: - - smart2=0x1000,0x2000 - -If you were loading the driver as a module, you'd give load it like this: - - modprobe cpqarray eisa=0x1000,0x2000 - -You can use EISA and PCI adapters at the same time. - - -Device Naming: --------------- - -You need some entries in /dev for the ida device. MAKEDEV in the /dev -directory can make device nodes for you automatically. The device setup is -as follows: - -Major numbers: - 72 ida0 - 73 ida1 - 74 ida2 - 75 ida3 - 76 ida4 - 77 ida5 - 78 ida6 - 79 ida7 - -Minor numbers: - b7 b6 b5 b4 b3 b2 b1 b0 - |----+----| |----+----| - | | - | +-------- Partition ID (0=wholedev, 1-15 partition) - | - +-------------------- Logical Volume number - -The device naming scheme is: -/dev/ida/c0d0 Controller 0, disk 0, whole device -/dev/ida/c0d0p1 Controller 0, disk 0, partition 1 -/dev/ida/c0d0p2 Controller 0, disk 0, partition 2 -/dev/ida/c0d0p3 Controller 0, disk 0, partition 3 - -/dev/ida/c1d1 Controller 1, disk 1, whole device -/dev/ida/c1d1p1 Controller 1, disk 1, partition 1 -/dev/ida/c1d1p2 Controller 1, disk 1, partition 2 -/dev/ida/c1d1p3 Controller 1, disk 1, partition 3 - - -Changelog: -========== - -10-28-2004 : General cleanup, syntax fixes for in-kernel driver version. - James Nelson - - -1999 : Original Document diff --git a/Documentation/digiepca.txt b/Documentation/digiepca.txt deleted file mode 100644 index f2560e22f2c..00000000000 --- a/Documentation/digiepca.txt +++ /dev/null @@ -1,98 +0,0 @@ -NOTE: This driver is obsolete. Digi provides a 2.6 driver (dgdm) at -http://www.digi.com for PCI cards. They no longer maintain this driver, -and have no 2.6 driver for ISA cards. - -This driver requires a number of user-space tools. They can be acquired from -http://www.digi.com, but only works with 2.4 kernels. - - -The Digi Intl. epca driver. ----------------------------- -The Digi Intl. epca driver for Linux supports the following boards: - -Digi PC/Xem, PC/Xr, PC/Xe, PC/Xi, PC/Xeve -Digi EISA/Xem, PCI/Xem, PCI/Xr - -Limitations: ------------- -Currently the driver only autoprobes for supported PCI boards. - -The Linux MAKEDEV command does not support generating the Digiboard -Devices. Users executing digiConfig to setup EISA and PC series cards -will have their device nodes automatically constructed (cud?? for ~CLOCAL, -and ttyD?? for CLOCAL). Users wishing to boot their board from the LILO -prompt, or those users booting PCI cards may use buildDIGI to construct -the necessary nodes. - -Notes: ------- -This driver may be configured via LILO. For users who have already configured -their driver using digiConfig, configuring from LILO will override previous -settings. Multiple boards may be configured by issuing multiple LILO command -lines. For examples see the bottom of this document. - -Device names start at 0 and continue up. Beware of this as previous Digi -drivers started device names with 1. - -PCI boards are auto-detected and configured by the driver. PCI boards will -be allocated device numbers (internally) beginning with the lowest PCI slot -first. In other words a PCI card in slot 3 will always have higher device -nodes than a PCI card in slot 1. - -LILO config examples: ---------------------- -Using LILO's APPEND command, a string of comma separated identifiers or -integers can be used to configure supported boards. The six values in order -are: - - Enable/Disable this card or Override, - Type of card: PC/Xe (AccelePort) (0), PC/Xeve (1), PC/Xem or PC/Xr (2), - EISA/Xem (3), PC/64Xe (4), PC/Xi (5), - Enable/Disable alternate pin arrangement, - Number of ports on this card, - I/O Port where card is configured (in HEX if using string identifiers), - Base of memory window (in HEX if using string identifiers), - -NOTE : PCI boards are auto-detected and configured. Do not attempt to -configure PCI boards with the LILO append command. If you wish to override -previous configuration data (As set by digiConfig), but you do not wish to -configure any specific card (Example if there are PCI cards in the system) -the following override command will accomplish this: --> append="digi=2" - -Samples: - append="digiepca=E,PC/Xe,D,16,200,D0000" - or - append="digi=1,0,0,16,512,851968" - -Supporting Tools: ------------------ -Supporting tools include digiDload, digiConfig, buildPCI, and ditty. See -drivers/char/README.epca for more details. Note, -this driver REQUIRES that digiDload be executed prior to it being used. -Failure to do this will result in an ENODEV error. - -Documentation: --------------- -Complete documentation for this product may be found in the tool package. - -Sources of information and support: ------------------------------------ -Digi Intl. support site for this product: - --> http://www.digi.com - -Acknowledgments: ----------------- -Much of this work (And even text) was derived from a similar document -supporting the original public domain DigiBoard driver Copyright (C) -1994,1995 Troy De Jongh. Many thanks to Christoph Lameter -(christoph@lameter.com) and Mike McLagan (mike.mclagan@linux.org) who authored -and contributed to the original document. - -Changelog: ----------- -10-29-04: Update status of driver, remove dead links in document - James Nelson - -2000 (?) Original Document diff --git a/Documentation/floppy.txt b/Documentation/floppy.txt deleted file mode 100644 index 6ccab88705c..00000000000 --- a/Documentation/floppy.txt +++ /dev/null @@ -1,245 +0,0 @@ -This file describes the floppy driver. - -FAQ list: -========= - - A FAQ list may be found in the fdutils package (see below), and also -at . - - -LILO configuration options (Thinkpad users, read this) -====================================================== - - The floppy driver is configured using the 'floppy=' option in -lilo. This option can be typed at the boot prompt, or entered in the -lilo configuration file. - - Example: If your kernel is called linux-2.6.9, type the following line -at the lilo boot prompt (if you have a thinkpad): - - linux-2.6.9 floppy=thinkpad - -You may also enter the following line in /etc/lilo.conf, in the description -of linux-2.6.9: - - append = "floppy=thinkpad" - - Several floppy related options may be given, example: - - linux-2.6.9 floppy=daring floppy=two_fdc - append = "floppy=daring floppy=two_fdc" - - If you give options both in the lilo config file and on the boot -prompt, the option strings of both places are concatenated, the boot -prompt options coming last. That's why there are also options to -restore the default behavior. - - -Module configuration options -============================ - - If you use the floppy driver as a module, use the following syntax: -modprobe floppy - -Example: - modprobe floppy omnibook messages - - If you need certain options enabled every time you load the floppy driver, -you can put: - - options floppy omnibook messages - -in /etc/modprobe.conf. - - - The floppy driver related options are: - - floppy=asus_pci - Sets the bit mask to allow only units 0 and 1. (default) - - floppy=daring - Tells the floppy driver that you have a well behaved floppy controller. - This allows more efficient and smoother operation, but may fail on - certain controllers. This may speed up certain operations. - - floppy=0,daring - Tells the floppy driver that your floppy controller should be used - with caution. - - floppy=one_fdc - Tells the floppy driver that you have only one floppy controller. - (default) - - floppy=two_fdc - floppy=
,two_fdc - Tells the floppy driver that you have two floppy controllers. - The second floppy controller is assumed to be at
. - This option is not needed if the second controller is at address - 0x370, and if you use the 'cmos' option. - - floppy=thinkpad - Tells the floppy driver that you have a Thinkpad. Thinkpads use an - inverted convention for the disk change line. - - floppy=0,thinkpad - Tells the floppy driver that you don't have a Thinkpad. - - floppy=omnibook - floppy=nodma - Tells the floppy driver not to use Dma for data transfers. - This is needed on HP Omnibooks, which don't have a workable - DMA channel for the floppy driver. This option is also useful - if you frequently get "Unable to allocate DMA memory" messages. - Indeed, dma memory needs to be continuous in physical memory, - and is thus harder to find, whereas non-dma buffers may be - allocated in virtual memory. However, I advise against this if - you have an FDC without a FIFO (8272A or 82072). 82072A and - later are OK. You also need at least a 486 to use nodma. - If you use nodma mode, I suggest you also set the FIFO - threshold to 10 or lower, in order to limit the number of data - transfer interrupts. - - If you have a FIFO-able FDC, the floppy driver automatically - falls back on non DMA mode if no DMA-able memory can be found. - If you want to avoid this, explicitly ask for 'yesdma'. - - floppy=yesdma - Tells the floppy driver that a workable DMA channel is available. - (default) - - floppy=nofifo - Disables the FIFO entirely. This is needed if you get "Bus - master arbitration error" messages from your Ethernet card (or - from other devices) while accessing the floppy. - - floppy=usefifo - Enables the FIFO. (default) - - floppy=,fifo_depth - Sets the FIFO threshold. This is mostly relevant in DMA - mode. If this is higher, the floppy driver tolerates more - interrupt latency, but it triggers more interrupts (i.e. it - imposes more load on the rest of the system). If this is - lower, the interrupt latency should be lower too (faster - processor). The benefit of a lower threshold is less - interrupts. - - To tune the fifo threshold, switch on over/underrun messages - using 'floppycontrol --messages'. Then access a floppy - disk. If you get a huge amount of "Over/Underrun - retrying" - messages, then the fifo threshold is too low. Try with a - higher value, until you only get an occasional Over/Underrun. - It is a good idea to compile the floppy driver as a module - when doing this tuning. Indeed, it allows to try different - fifo values without rebooting the machine for each test. Note - that you need to do 'floppycontrol --messages' every time you - re-insert the module. - - Usually, tuning the fifo threshold should not be needed, as - the default (0xa) is reasonable. - - floppy=,,cmos - Sets the CMOS type of to . This is mandatory if - you have more than two floppy drives (only two can be - described in the physical CMOS), or if your BIOS uses - non-standard CMOS types. The CMOS types are: - - 0 - Use the value of the physical CMOS - 1 - 5 1/4 DD - 2 - 5 1/4 HD - 3 - 3 1/2 DD - 4 - 3 1/2 HD - 5 - 3 1/2 ED - 6 - 3 1/2 ED - 16 - unknown or not installed - - (Note: there are two valid types for ED drives. This is because 5 was - initially chosen to represent floppy *tapes*, and 6 for ED drives. - AMI ignored this, and used 5 for ED drives. That's why the floppy - driver handles both.) - - floppy=unexpected_interrupts - Print a warning message when an unexpected interrupt is received. - (default) - - floppy=no_unexpected_interrupts - floppy=L40SX - Don't print a message when an unexpected interrupt is received. This - is needed on IBM L40SX laptops in certain video modes. (There seems - to be an interaction between video and floppy. The unexpected - interrupts affect only performance, and can be safely ignored.) - - floppy=broken_dcl - Don't use the disk change line, but assume that the disk was - changed whenever the device node is reopened. Needed on some - boxes where the disk change line is broken or unsupported. - This should be regarded as a stopgap measure, indeed it makes - floppy operation less efficient due to unneeded cache - flushings, and slightly more unreliable. Please verify your - cable, connection and jumper settings if you have any DCL - problems. However, some older drives, and also some laptops - are known not to have a DCL. - - floppy=debug - Print debugging messages. - - floppy=messages - Print informational messages for some operations (disk change - notifications, warnings about over and underruns, and about - autodetection). - - floppy=silent_dcl_clear - Uses a less noisy way to clear the disk change line (which - doesn't involve seeks). Implied by 'daring' option. - - floppy=,irq - Sets the floppy IRQ to instead of 6. - - floppy=,dma - Sets the floppy DMA channel to instead of 2. - - floppy=slow - Use PS/2 stepping rate: - " PS/2 floppies have much slower step rates than regular floppies. - It's been recommended that take about 1/4 of the default speed - in some more extreme cases." - - -Supporting utilities and additional documentation: -================================================== - - Additional parameters of the floppy driver can be configured at -runtime. Utilities which do this can be found in the fdutils package. -This package also contains a new version of mtools which allows to -access high capacity disks (up to 1992K on a high density 3 1/2 disk!). -It also contains additional documentation about the floppy driver. - -The latest version can be found at fdutils homepage: - http://fdutils.linux.lu - -The fdutils releases can be found at: - http://fdutils.linux.lu/download.html - http://www.tux.org/pub/knaff/fdutils/ - ftp://metalab.unc.edu/pub/Linux/utils/disk-management/ - -Reporting problems about the floppy driver -========================================== - - If you have a question or a bug report about the floppy driver, mail -me at Alain.Knaff@poboxes.com . If you post to Usenet, preferably use -comp.os.linux.hardware. As the volume in these groups is rather high, -be sure to include the word "floppy" (or "FLOPPY") in the subject -line. If the reported problem happens when mounting floppy disks, be -sure to mention also the type of the filesystem in the subject line. - - Be sure to read the FAQ before mailing/posting any bug reports! - - Alain - -Changelog -========= - -10-30-2004 : Cleanup, updating, add reference to module configuration. - James Nelson - -6-3-2000 : Original Document diff --git a/Documentation/hayes-esp.txt b/Documentation/hayes-esp.txt deleted file mode 100644 index 09b5d585675..00000000000 --- a/Documentation/hayes-esp.txt +++ /dev/null @@ -1,154 +0,0 @@ -HAYES ESP DRIVER VERSION 2.1 - -A big thanks to the people at Hayes, especially Alan Adamson. Their support -has enabled me to provide enhancements to the driver. - -Please report your experiences with this driver to me (arobinso@nyx.net). I -am looking for both positive and negative feedback. - -*** IMPORTANT CHANGES FOR 2.1 *** -Support for PIO mode. Five situations will cause PIO mode to be used: -1) A multiport card is detected. PIO mode will always be used. (8 port cards -do not support DMA). -2) The DMA channel is set to an invalid value (anything other than 1 or 3). -3) The DMA buffer/channel could not be allocated. The port will revert to PIO -mode until it is reopened. -4) Less than a specified number of bytes need to be transferred to/from the -FIFOs. PIO mode will be used for that transfer only. -5) A port needs to do a DMA transfer and another port is already using the -DMA channel. PIO mode will be used for that transfer only. - -Since the Hayes ESP seems to conflict with other cards (notably sound cards) -when using DMA, DMA is turned off by default. To use DMA, it must be turned -on explicitly, either with the "dma=" option described below or with -setserial. A multiport card can be forced into DMA mode by using setserial; -however, most multiport cards don't support DMA. - -The latest version of setserial allows the enhanced configuration of the ESP -card to be viewed and modified. -*** - -This package contains the files needed to compile a module to support the Hayes -ESP card. The drivers are basically a modified version of the serial drivers. - -Features: - -- Uses the enhanced mode of the ESP card, allowing a wider range of - interrupts and features than compatibility mode -- Uses DMA and 16 bit PIO mode to transfer data to and from the ESP's FIFOs, - reducing CPU load -- Supports primary and secondary ports - - -If the driver is compiled as a module, the IRQs to use can be specified by -using the irq= option. The format is: - -irq=[0x100],[0x140],[0x180],[0x200],[0x240],[0x280],[0x300],[0x380] - -The address in brackets is the base address of the card. The IRQ of -nonexistent cards can be set to 0. If an IRQ of a card that does exist is set -to 0, the driver will attempt to guess at the correct IRQ. For example, to set -the IRQ of the card at address 0x300 to 12, the insmod command would be: - -insmod esp irq=0,0,0,0,0,0,12,0 - -The custom divisor can be set by using the divisor= option. The format is the -same as for the irq= option. Each divisor value is a series of hex digits, -with each digit representing the divisor to use for a corresponding port. The -divisor value is constructed RIGHT TO LEFT. Specifying a nonzero divisor value -will automatically set the spd_cust flag. To calculate the divisor to use for -a certain baud rate, divide the port's base baud (generally 921600) by the -desired rate. For example, to set the divisor of the primary port at 0x300 to -4 and the divisor of the secondary port at 0x308 to 8, the insmod command would -be: - -insmod esp divisor=0,0,0,0,0,0,0x84,0 - -The dma= option can be used to set the DMA channel. The channel can be either -1 or 3. Specifying any other value will force the driver to use PIO mode. -For example, to set the DMA channel to 3, the insmod command would be: - -insmod esp dma=3 - -The rx_trigger= and tx_trigger= options can be used to set the FIFO trigger -levels. They specify when the ESP card should send an interrupt. Larger -values will decrease the number of interrupts; however, a value too high may -result in data loss. Valid values are 1 through 1023, with 768 being the -default. For example, to set the receive trigger level to 512 bytes and the -transmit trigger level to 700 bytes, the insmod command would be: - -insmod esp rx_trigger=512 tx_trigger=700 - -The flow_off= and flow_on= options can be used to set the hardware flow off/ -flow on levels. The flow on level must be lower than the flow off level, and -the flow off level should be higher than rx_trigger. Valid values are 1 -through 1023, with 1016 being the default flow off level and 944 being the -default flow on level. For example, to set the flow off level to 1000 bytes -and the flow on level to 935 bytes, the insmod command would be: - -insmod esp flow_off=1000 flow_on=935 - -The rx_timeout= option can be used to set the receive timeout value. This -value indicates how long after receiving the last character that the ESP card -should wait before signalling an interrupt. Valid values are 0 though 255, -with 128 being the default. A value too high will increase latency, and a -value too low will cause unnecessary interrupts. For example, to set the -receive timeout to 255, the insmod command would be: - -insmod esp rx_timeout=255 - -The pio_threshold= option sets the threshold (in number of characters) for -using PIO mode instead of DMA mode. For example, if this value is 32, -transfers of 32 bytes or less will always use PIO mode. - -insmod esp pio_threshold=32 - -Multiple options can be listed on the insmod command line by separating each -option with a space. For example: - -insmod esp dma=3 trigger=512 - -The esp module can be automatically loaded when needed. To cause this to -happen, add the following lines to /etc/modprobe.conf (replacing the last line -with options for your configuration): - -alias char-major-57 esp -alias char-major-58 esp -options esp irq=0,0,0,0,0,0,3,0 divisor=0,0,0,0,0,0,0x4,0 - -You may also need to run 'depmod -a'. - -Devices must be created manually. To create the devices, note the output from -the module after it is inserted. The output will appear in the location where -kernel messages usually appear (usually /var/adm/messages). Create two devices -for each 'tty' mentioned, one with major of 57 and the other with major of 58. -The minor number should be the same as the tty number reported. The commands -would be (replace ? with the tty number): - -mknod /dev/ttyP? c 57 ? -mknod /dev/cup? c 58 ? - -For example, if the following line appears: - -Oct 24 18:17:23 techno kernel: ttyP8 at 0x0140 (irq = 3) is an ESP primary port - -...two devices should be created: - -mknod /dev/ttyP8 c 57 8 -mknod /dev/cup8 c 58 8 - -You may need to set the permissions on the devices: - -chmod 666 /dev/ttyP* -chmod 666 /dev/cup* - -The ESP module and the serial module should not conflict (they can be used at -the same time). After the ESP module has been loaded the ports on the ESP card -will no longer be accessible by the serial driver. - -If I/O errors are experienced when accessing the port, check for IRQ and DMA -conflicts ('cat /proc/interrupts' and 'cat /proc/dma' for a list of IRQs and -DMAs currently in use). - -Enjoy! -Andrew J. Robinson diff --git a/Documentation/ioctl-number.txt b/Documentation/ioctl-number.txt deleted file mode 100644 index b880ce5dbd3..00000000000 --- a/Documentation/ioctl-number.txt +++ /dev/null @@ -1,201 +0,0 @@ -Ioctl Numbers -19 October 1999 -Michael Elizabeth Chastain - - -If you are adding new ioctl's to the kernel, you should use the _IO -macros defined in : - - _IO an ioctl with no parameters - _IOW an ioctl with write parameters (copy_from_user) - _IOR an ioctl with read parameters (copy_to_user) - _IOWR an ioctl with both write and read parameters. - -'Write' and 'read' are from the user's point of view, just like the -system calls 'write' and 'read'. For example, a SET_FOO ioctl would -be _IOW, although the kernel would actually read data from user space; -a GET_FOO ioctl would be _IOR, although the kernel would actually write -data to user space. - -The first argument to _IO, _IOW, _IOR, or _IOWR is an identifying letter -or number from the table below. Because of the large number of drivers, -many drivers share a partial letter with other drivers. - -If you are writing a driver for a new device and need a letter, pick an -unused block with enough room for expansion: 32 to 256 ioctl commands. -You can register the block by patching this file and submitting the -patch to Linus Torvalds. Or you can e-mail me at and -I'll register one for you. - -The second argument to _IO, _IOW, _IOR, or _IOWR is a sequence number -to distinguish ioctls from each other. The third argument to _IOW, -_IOR, or _IOWR is the type of the data going into the kernel or coming -out of the kernel (e.g. 'int' or 'struct foo'). NOTE! Do NOT use -sizeof(arg) as the third argument as this results in your ioctl thinking -it passes an argument of type size_t. - -Some devices use their major number as the identifier; this is OK, as -long as it is unique. Some devices are irregular and don't follow any -convention at all. - -Following this convention is good because: - -(1) Keeping the ioctl's globally unique helps error checking: - if a program calls an ioctl on the wrong device, it will get an - error rather than some unexpected behaviour. - -(2) The 'strace' build procedure automatically finds ioctl numbers - defined with _IO, _IOW, _IOR, or _IOWR. - -(3) 'strace' can decode numbers back into useful names when the - numbers are unique. - -(4) People looking for ioctls can grep for them more easily when - this convention is used to define the ioctl numbers. - -(5) When following the convention, the driver code can use generic - code to copy the parameters between user and kernel space. - -This table lists ioctls visible from user land for Linux/i386. It contains -most drivers up to 2.3.14, but I know I am missing some. - -Code Seq# Include File Comments -======================================================== -0x00 00-1F linux/fs.h conflict! -0x00 00-1F scsi/scsi_ioctl.h conflict! -0x00 00-1F linux/fb.h conflict! -0x00 00-1F linux/wavefront.h conflict! -0x02 all linux/fd.h -0x03 all linux/hdreg.h -0x04 D2-DC linux/umsdos_fs.h Dead since 2.6.11, but don't reuse these. -0x06 all linux/lp.h -0x09 all linux/md.h -0x12 all linux/fs.h - linux/blkpg.h -0x1b all InfiniBand Subsystem -0x20 all drivers/cdrom/cm206.h -0x22 all scsi/sg.h -'#' 00-3F IEEE 1394 Subsystem Block for the entire subsystem -'1' 00-1F PPS kit from Ulrich Windl - -'8' all SNP8023 advanced NIC card - -'A' 00-1F linux/apm_bios.h -'B' C0-FF advanced bbus - -'C' all linux/soundcard.h -'D' all asm-s390/dasd.h -'E' all linux/input.h -'F' all linux/fb.h -'H' all linux/hiddev.h -'I' all linux/isdn.h -'J' 00-1F drivers/scsi/gdth_ioctl.h -'K' all linux/kd.h -'L' 00-1F linux/loop.h -'L' 20-2F driver/usb/misc/vstusb.h -'L' E0-FF linux/ppdd.h encrypted disk device driver - -'M' all linux/soundcard.h -'N' 00-1F drivers/usb/scanner.h -'P' all linux/soundcard.h -'Q' all linux/soundcard.h -'R' 00-1F linux/random.h -'S' all linux/cdrom.h conflict! -'S' 80-81 scsi/scsi_ioctl.h conflict! -'S' 82-FF scsi/scsi.h conflict! -'T' all linux/soundcard.h conflict! -'T' all asm-i386/ioctls.h conflict! -'U' 00-EF linux/drivers/usb/usb.h -'V' all linux/vt.h -'W' 00-1F linux/watchdog.h conflict! -'W' 00-1F linux/wanrouter.h conflict! -'X' all linux/xfs_fs.h -'Y' all linux/cyclades.h -'[' 00-07 linux/usb/usbtmc.h USB Test and Measurement Devices - -'a' all ATM on linux - -'b' 00-FF bit3 vme host bridge - -'c' 00-7F linux/comstats.h conflict! -'c' 00-7F linux/coda.h conflict! -'c' 80-9F asm-s390/chsc.h -'d' 00-FF linux/char/drm/drm/h conflict! -'d' 00-DF linux/video_decoder.h conflict! -'d' F0-FF linux/digi1.h -'e' all linux/digi1.h conflict! -'e' 00-1F linux/video_encoder.h conflict! -'e' 00-1F net/irda/irtty.h conflict! -'f' 00-1F linux/ext2_fs.h -'h' 00-7F Charon filesystem - -'i' 00-3F linux/i2o.h -'j' 00-3F linux/joystick.h -'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system - -'l' 40-7F linux/udf_fs_i.h in development: - -'m' all linux/mtio.h conflict! -'m' all linux/soundcard.h conflict! -'m' all linux/synclink.h conflict! -'m' 00-1F net/irda/irmod.h conflict! -'n' 00-7F linux/ncp_fs.h -'n' E0-FF video/matrox.h matroxfb -'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2 -'p' 00-0F linux/phantom.h conflict! (OpenHaptics needs this) -'p' 00-3F linux/mc146818rtc.h conflict! -'p' 40-7F linux/nvram.h -'p' 80-9F user-space parport - -'q' 00-1F linux/serio.h -'q' 80-FF Internet PhoneJACK, Internet LineJACK - -'r' 00-1F linux/msdos_fs.h -'s' all linux/cdk.h -'t' 00-7F linux/if_ppp.h -'t' 80-8F linux/isdn_ppp.h -'u' 00-1F linux/smb_fs.h -'v' 00-1F linux/ext2_fs.h conflict! -'v' all linux/videodev.h conflict! -'w' all CERN SCI driver -'y' 00-1F packet based user level communications - -'z' 00-3F CAN bus card - -'z' 40-7F CAN bus card - -0x80 00-1F linux/fb.h -0x81 00-1F linux/videotext.h -0x89 00-06 asm-i386/sockios.h -0x89 0B-DF linux/sockios.h -0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range -0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range -0x8B all linux/wireless.h -0x8C 00-3F WiNRADiO driver - -0x90 00 drivers/cdrom/sbpcd.h -0x93 60-7F linux/auto_fs.h -0x99 00-0F 537-Addinboard driver - -0xA0 all linux/sdp/sdp.h Industrial Device Project - -0xA3 80-8F Port ACL in development: - -0xA3 90-9F linux/dtlk.h -0xAB 00-1F linux/nbd.h -0xAC 00-1F linux/raw.h -0xAD 00 Netfilter device in development: - -0xAE all linux/kvm.h Kernel-based Virtual Machine - -0xB0 all RATIO devices in development: - -0xB1 00-1F PPPoX -0xCB 00-1F CBM serial IEC bus in development: - -0xDD 00-3F ZFCP device driver see drivers/s390/scsi/ - -0xF3 00-3F video/sisfb.h sisfb (in development) - -0xF4 00-1F video/mbxfb.h mbxfb - diff --git a/Documentation/ioctl/00-INDEX b/Documentation/ioctl/00-INDEX new file mode 100644 index 00000000000..d2fe4d4729e --- /dev/null +++ b/Documentation/ioctl/00-INDEX @@ -0,0 +1,10 @@ +00-INDEX + - this file +cdrom.txt + - summary of CDROM ioctl calls +hdio.txt + - summary of HDIO_ ioctl calls +ioctl-decoding.txt + - how to decode the bits of an IOCTL code +ioctl-number.txt + - how to implement and register device/driver ioctl calls diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt new file mode 100644 index 00000000000..b880ce5dbd3 --- /dev/null +++ b/Documentation/ioctl/ioctl-number.txt @@ -0,0 +1,201 @@ +Ioctl Numbers +19 October 1999 +Michael Elizabeth Chastain + + +If you are adding new ioctl's to the kernel, you should use the _IO +macros defined in : + + _IO an ioctl with no parameters + _IOW an ioctl with write parameters (copy_from_user) + _IOR an ioctl with read parameters (copy_to_user) + _IOWR an ioctl with both write and read parameters. + +'Write' and 'read' are from the user's point of view, just like the +system calls 'write' and 'read'. For example, a SET_FOO ioctl would +be _IOW, although the kernel would actually read data from user space; +a GET_FOO ioctl would be _IOR, although the kernel would actually write +data to user space. + +The first argument to _IO, _IOW, _IOR, or _IOWR is an identifying letter +or number from the table below. Because of the large number of drivers, +many drivers share a partial letter with other drivers. + +If you are writing a driver for a new device and need a letter, pick an +unused block with enough room for expansion: 32 to 256 ioctl commands. +You can register the block by patching this file and submitting the +patch to Linus Torvalds. Or you can e-mail me at and +I'll register one for you. + +The second argument to _IO, _IOW, _IOR, or _IOWR is a sequence number +to distinguish ioctls from each other. The third argument to _IOW, +_IOR, or _IOWR is the type of the data going into the kernel or coming +out of the kernel (e.g. 'int' or 'struct foo'). NOTE! Do NOT use +sizeof(arg) as the third argument as this results in your ioctl thinking +it passes an argument of type size_t. + +Some devices use their major number as the identifier; this is OK, as +long as it is unique. Some devices are irregular and don't follow any +convention at all. + +Following this convention is good because: + +(1) Keeping the ioctl's globally unique helps error checking: + if a program calls an ioctl on the wrong device, it will get an + error rather than some unexpected behaviour. + +(2) The 'strace' build procedure automatically finds ioctl numbers + defined with _IO, _IOW, _IOR, or _IOWR. + +(3) 'strace' can decode numbers back into useful names when the + numbers are unique. + +(4) People looking for ioctls can grep for them more easily when + this convention is used to define the ioctl numbers. + +(5) When following the convention, the driver code can use generic + code to copy the parameters between user and kernel space. + +This table lists ioctls visible from user land for Linux/i386. It contains +most drivers up to 2.3.14, but I know I am missing some. + +Code Seq# Include File Comments +======================================================== +0x00 00-1F linux/fs.h conflict! +0x00 00-1F scsi/scsi_ioctl.h conflict! +0x00 00-1F linux/fb.h conflict! +0x00 00-1F linux/wavefront.h conflict! +0x02 all linux/fd.h +0x03 all linux/hdreg.h +0x04 D2-DC linux/umsdos_fs.h Dead since 2.6.11, but don't reuse these. +0x06 all linux/lp.h +0x09 all linux/md.h +0x12 all linux/fs.h + linux/blkpg.h +0x1b all InfiniBand Subsystem +0x20 all drivers/cdrom/cm206.h +0x22 all scsi/sg.h +'#' 00-3F IEEE 1394 Subsystem Block for the entire subsystem +'1' 00-1F PPS kit from Ulrich Windl + +'8' all SNP8023 advanced NIC card + +'A' 00-1F linux/apm_bios.h +'B' C0-FF advanced bbus + +'C' all linux/soundcard.h +'D' all asm-s390/dasd.h +'E' all linux/input.h +'F' all linux/fb.h +'H' all linux/hiddev.h +'I' all linux/isdn.h +'J' 00-1F drivers/scsi/gdth_ioctl.h +'K' all linux/kd.h +'L' 00-1F linux/loop.h +'L' 20-2F driver/usb/misc/vstusb.h +'L' E0-FF linux/ppdd.h encrypted disk device driver + +'M' all linux/soundcard.h +'N' 00-1F drivers/usb/scanner.h +'P' all linux/soundcard.h +'Q' all linux/soundcard.h +'R' 00-1F linux/random.h +'S' all linux/cdrom.h conflict! +'S' 80-81 scsi/scsi_ioctl.h conflict! +'S' 82-FF scsi/scsi.h conflict! +'T' all linux/soundcard.h conflict! +'T' all asm-i386/ioctls.h conflict! +'U' 00-EF linux/drivers/usb/usb.h +'V' all linux/vt.h +'W' 00-1F linux/watchdog.h conflict! +'W' 00-1F linux/wanrouter.h conflict! +'X' all linux/xfs_fs.h +'Y' all linux/cyclades.h +'[' 00-07 linux/usb/usbtmc.h USB Test and Measurement Devices + +'a' all ATM on linux + +'b' 00-FF bit3 vme host bridge + +'c' 00-7F linux/comstats.h conflict! +'c' 00-7F linux/coda.h conflict! +'c' 80-9F asm-s390/chsc.h +'d' 00-FF linux/char/drm/drm/h conflict! +'d' 00-DF linux/video_decoder.h conflict! +'d' F0-FF linux/digi1.h +'e' all linux/digi1.h conflict! +'e' 00-1F linux/video_encoder.h conflict! +'e' 00-1F net/irda/irtty.h conflict! +'f' 00-1F linux/ext2_fs.h +'h' 00-7F Charon filesystem + +'i' 00-3F linux/i2o.h +'j' 00-3F linux/joystick.h +'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system + +'l' 40-7F linux/udf_fs_i.h in development: + +'m' all linux/mtio.h conflict! +'m' all linux/soundcard.h conflict! +'m' all linux/synclink.h conflict! +'m' 00-1F net/irda/irmod.h conflict! +'n' 00-7F linux/ncp_fs.h +'n' E0-FF video/matrox.h matroxfb +'o' 00-1F fs/ocfs2/ocfs2_fs.h OCFS2 +'p' 00-0F linux/phantom.h conflict! (OpenHaptics needs this) +'p' 00-3F linux/mc146818rtc.h conflict! +'p' 40-7F linux/nvram.h +'p' 80-9F user-space parport + +'q' 00-1F linux/serio.h +'q' 80-FF Internet PhoneJACK, Internet LineJACK + +'r' 00-1F linux/msdos_fs.h +'s' all linux/cdk.h +'t' 00-7F linux/if_ppp.h +'t' 80-8F linux/isdn_ppp.h +'u' 00-1F linux/smb_fs.h +'v' 00-1F linux/ext2_fs.h conflict! +'v' all linux/videodev.h conflict! +'w' all CERN SCI driver +'y' 00-1F packet based user level communications + +'z' 00-3F CAN bus card + +'z' 40-7F CAN bus card + +0x80 00-1F linux/fb.h +0x81 00-1F linux/videotext.h +0x89 00-06 asm-i386/sockios.h +0x89 0B-DF linux/sockios.h +0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range +0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range +0x8B all linux/wireless.h +0x8C 00-3F WiNRADiO driver + +0x90 00 drivers/cdrom/sbpcd.h +0x93 60-7F linux/auto_fs.h +0x99 00-0F 537-Addinboard driver + +0xA0 all linux/sdp/sdp.h Industrial Device Project + +0xA3 80-8F Port ACL in development: + +0xA3 90-9F linux/dtlk.h +0xAB 00-1F linux/nbd.h +0xAC 00-1F linux/raw.h +0xAD 00 Netfilter device in development: + +0xAE all linux/kvm.h Kernel-based Virtual Machine + +0xB0 all RATIO devices in development: + +0xB1 00-1F PPPoX +0xCB 00-1F CBM serial IEC bus in development: + +0xDD 00-3F ZFCP device driver see drivers/s390/scsi/ + +0xF3 00-3F video/sisfb.h sisfb (in development) + +0xF4 00-1F video/mbxfb.h mbxfb + diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index c600c4ffc65..9fa6508892c 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -629,7 +629,7 @@ and is between 256 and 4096 characters. It is defined in the file digiepca= [HW,SERIAL] See drivers/char/README.epca and - Documentation/digiepca.txt. + Documentation/serial/digiepca.txt. disable_mtrr_cleanup [X86] enable_mtrr_cleanup [X86] @@ -740,7 +740,7 @@ and is between 256 and 4096 characters. It is defined in the file See header of drivers/scsi/fdomain.c. floppy= [HW] - See Documentation/floppy.txt. + See Documentation/blockdev/floppy.txt. force_pal_cache_flush [IA-64] Avoid check_sal_cache_flush which may hang on @@ -1101,7 +1101,7 @@ and is between 256 and 4096 characters. It is defined in the file the same attribute, the last one is used. load_ramdisk= [RAM] List of ramdisks to load from floppy - See Documentation/ramdisk.txt. + See Documentation/blockdev/ramdisk.txt. lockd.nlm_grace_period=P [NFS] Assign grace period. Format: @@ -1596,7 +1596,7 @@ and is between 256 and 4096 characters. It is defined in the file pcd. [PARIDE] See header of drivers/block/paride/pcd.c. - See also Documentation/paride.txt. + See also Documentation/blockdev/paride.txt. pci=option[,option...] [PCI] various PCI subsystem options: off [X86] don't probe for the PCI bus @@ -1697,7 +1697,7 @@ and is between 256 and 4096 characters. It is defined in the file pcmv= [HW,PCMCIA] BadgePAD 4 pd. [PARIDE] - See Documentation/paride.txt. + See Documentation/blockdev/paride.txt. pdcchassis= [PARISC,HW] Disable/Enable PDC Chassis Status codes at boot time. @@ -1705,10 +1705,10 @@ and is between 256 and 4096 characters. It is defined in the file See arch/parisc/kernel/pdc_chassis.c pf. [PARIDE] - See Documentation/paride.txt. + See Documentation/blockdev/paride.txt. pg. [PARIDE] - See Documentation/paride.txt. + See Documentation/blockdev/paride.txt. pirq= [SMP,APIC] Manual mp-table setup See Documentation/x86/i386/IO-APIC.txt. @@ -1778,7 +1778,7 @@ and is between 256 and 4096 characters. It is defined in the file prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk before loading. - See Documentation/ramdisk.txt. + See Documentation/blockdev/ramdisk.txt. psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to probe for; one of (bare|imps|exps|lifebook|any). @@ -1798,7 +1798,7 @@ and is between 256 and 4096 characters. It is defined in the file ,,,,, pt. [PARIDE] - See Documentation/paride.txt. + See Documentation/blockdev/paride.txt. pty.legacy_count= [KNL] Number of legacy pty's. Overwrites compiled-in @@ -1812,10 +1812,10 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/md.txt. ramdisk_blocksize= [RAM] - See Documentation/ramdisk.txt. + See Documentation/blockdev/ramdisk.txt. ramdisk_size= [RAM] Sizes of RAM disks in kilobytes - See Documentation/ramdisk.txt. + See Documentation/blockdev/ramdisk.txt. rcupdate.blimit= [KNL,BOOT] Set maximum number of finished RCU callbacks to process @@ -2147,7 +2147,7 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/sonypi.txt specialix= [HW,SERIAL] Specialix multi-serial port adapter - See Documentation/specialix.txt. + See Documentation/serial/specialix.txt. spia_io_base= [HW,MTD] spia_fio_base= diff --git a/Documentation/moxa-smartio b/Documentation/moxa-smartio deleted file mode 100644 index 5337e80a5b9..00000000000 --- a/Documentation/moxa-smartio +++ /dev/null @@ -1,523 +0,0 @@ -============================================================================= - MOXA Smartio/Industio Family Device Driver Installation Guide - for Linux Kernel 2.4.x, 2.6.x - Copyright (C) 2008, Moxa Inc. -============================================================================= -Date: 01/21/2008 - -Content - -1. Introduction -2. System Requirement -3. Installation - 3.1 Hardware installation - 3.2 Driver files - 3.3 Device naming convention - 3.4 Module driver configuration - 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x. - 3.6 Custom configuration - 3.7 Verify driver installation -4. Utilities -5. Setserial -6. Troubleshooting - ------------------------------------------------------------------------------ -1. Introduction - - The Smartio/Industio/UPCI family Linux driver supports following multiport - boards. - - - 2 ports multiport board - CP-102U, CP-102UL, CP-102UF - CP-132U-I, CP-132UL, - CP-132, CP-132I, CP132S, CP-132IS, - CI-132, CI-132I, CI-132IS, - (C102H, C102HI, C102HIS, C102P, CP-102, CP-102S) - - - 4 ports multiport board - CP-104EL, - CP-104UL, CP-104JU, - CP-134U, CP-134U-I, - C104H/PCI, C104HS/PCI, - CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL, - C104H, C104HS, - CI-104J, CI-104JS, - CI-134, CI-134I, CI-134IS, - (C114HI, CT-114I, C104P) - POS-104UL, - CB-114, - CB-134I - - - 8 ports multiport board - CP-118EL, CP-168EL, - CP-118U, CP-168U, - C168H/PCI, - C168H, C168HS, - (C168P), - CB-108 - - This driver and installation procedure have been developed upon Linux Kernel - 2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order - to maintain compatibility, this version has also been properly tested with - RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem - occurs, please contact Moxa at support@moxa.com.tw. - - In addition to device driver, useful utilities are also provided in this - version. They are - - msdiag Diagnostic program for displaying installed Moxa - Smartio/Industio boards. - - msmon Monitor program to observe data count and line status signals. - - msterm A simple terminal program which is useful in testing serial - ports. - - io-irq.exe Configuration program to setup ISA boards. Please note that - this program can only be executed under DOS. - - All the drivers and utilities are published in form of source code under - GNU General Public License in this version. Please refer to GNU General - Public License announcement in each source code file for more detail. - - In Moxa's Web sites, you may always find latest driver at http://web.moxa.com. - - This version of driver can be installed as Loadable Module (Module driver) - or built-in into kernel (Static driver). You may refer to following - installation procedure for suitable one. Before you install the driver, - please refer to hardware installation procedure in the User's Manual. - - We assume the user should be familiar with following documents. - - Serial-HOWTO - - Kernel-HOWTO - ------------------------------------------------------------------------------ -2. System Requirement - - Hardware platform: Intel x86 machine - - Kernel version: 2.4.x or 2.6.x - - gcc version 2.72 or later - - Maximum 4 boards can be installed in combination - ------------------------------------------------------------------------------ -3. Installation - - 3.1 Hardware installation - 3.2 Driver files - 3.3 Device naming convention - 3.4 Module driver configuration - 3.5 Static driver configuration for Linux kernel 2.4.x, 2.6.x. - 3.6 Custom configuration - 3.7 Verify driver installation - - - 3.1 Hardware installation - - There are two types of buses, ISA and PCI, for Smartio/Industio - family multiport board. - - ISA board - --------- - You'll have to configure CAP address, I/O address, Interrupt Vector - as well as IRQ before installing this driver. Please refer to hardware - installation procedure in User's Manual before proceed any further. - Please make sure the JP1 is open after the ISA board is set properly. - - PCI/UPCI board - -------------- - You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict - with other ISA devices. Please refer to hardware installation - procedure in User's Manual in advance. - - PCI IRQ Sharing - ----------- - Each port within the same multiport board shares the same IRQ. Up to - 4 Moxa Smartio/Industio PCI Family multiport boards can be installed - together on one system and they can share the same IRQ. - - - 3.2 Driver files - - The driver file may be obtained from ftp, CD-ROM or floppy disk. The - first step, anyway, is to copy driver file "mxser.tgz" into specified - directory. e.g. /moxa. The execute commands as below. - - # cd / - # mkdir moxa - # cd /moxa - # tar xvf /dev/fd0 - - or - - # cd / - # mkdir moxa - # cd /moxa - # cp /mnt/cdrom//mxser.tgz . - # tar xvfz mxser.tgz - - - 3.3 Device naming convention - - You may find all the driver and utilities files in /moxa/mxser. - Following installation procedure depends on the model you'd like to - run the driver. If you prefer module driver, please refer to 3.4. - If static driver is required, please refer to 3.5. - - Dialin and callout port - ----------------------- - This driver remains traditional serial device properties. There are - two special file name for each serial port. One is dial-in port - which is named "ttyMxx". For callout port, the naming convention - is "cumxx". - - Device naming when more than 2 boards installed - ----------------------------------------------- - Naming convention for each Smartio/Industio multiport board is - pre-defined as below. - - Board Num. Dial-in Port Callout port - 1st board ttyM0 - ttyM7 cum0 - cum7 - 2nd board ttyM8 - ttyM15 cum8 - cum15 - 3rd board ttyM16 - ttyM23 cum16 - cum23 - 4th board ttyM24 - ttym31 cum24 - cum31 - - - !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - Under Kernel 2.6 the cum Device is Obsolete. So use ttyM* - device instead. - !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - - Board sequence - -------------- - This driver will activate ISA boards according to the parameter set - in the driver. After all specified ISA board activated, PCI board - will be installed in the system automatically driven. - Therefore the board number is sorted by the CAP address of ISA boards. - For PCI boards, their sequence will be after ISA boards and C168H/PCI - has higher priority than C104H/PCI boards. - - 3.4 Module driver configuration - Module driver is easiest way to install. If you prefer static driver - installation, please skip this paragraph. - - - ------------- Prepare to use the MOXA driver-------------------- - 3.4.1 Create tty device with correct major number - Before using MOXA driver, your system must have the tty devices - which are created with driver's major number. We offer one shell - script "msmknod" to simplify the procedure. - This step is only needed to be executed once. But you still - need to do this procedure when: - a. You change the driver's major number. Please refer the "3.7" - section. - b. Your total installed MOXA boards number is changed. Maybe you - add/delete one MOXA board. - c. You want to change the tty name. This needs to modify the - shell script "msmknod" - - The procedure is: - # cd /moxa/mxser/driver - # ./msmknod - - This shell script will require the major number for dial-in - device and callout device to create tty device. You also need - to specify the total installed MOXA board number. Default major - numbers for dial-in device and callout device are 30, 35. If - you need to change to other number, please refer section "3.7" - for more detailed procedure. - Msmknod will delete any special files occupying the same device - naming. - - 3.4.2 Build the MOXA driver and utilities - Before using the MOXA driver and utilities, you need compile the - all the source code. This step is only need to be executed once. - But you still re-compile the source code if you modify the source - code. For example, if you change the driver's major number (see - "3.7" section), then you need to do this step again. - - Find "Makefile" in /moxa/mxser, then run - - # make clean; make install - - !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! - For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1: - # make clean; make installsp1 - - For Red Hat Enterprise Linux AS4/ES4/WS4: - # make clean; make installsp2 - !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! - - The driver files "mxser.o" and utilities will be properly compiled - and copied to system directories respectively. - - ------------- Load MOXA driver-------------------- - 3.4.3 Load the MOXA driver - - # modprobe mxser - - will activate the module driver. You may run "lsmod" to check - if "mxser" is activated. If the MOXA board is ISA board, the - is needed. Please refer to section "3.4.5" for more - information. - - - ------------- Load MOXA driver on boot -------------------- - 3.4.4 For the above description, you may manually execute - "modprobe mxser" to activate this driver and run - "rmmod mxser" to remove it. - However, it's better to have a boot time configuration to - eliminate manual operation. Boot time configuration can be - achieved by rc file. We offer one "rc.mxser" file to simplify - the procedure under "moxa/mxser/driver". - - But if you use ISA board, please modify the "modprobe ..." command - to add the argument (see "3.4.5" section). After modifying the - rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser" - manually to make sure the modification is ok. If any error - encountered, please try to modify again. If the modification is - completed, follow the below step. - - Run following command for setting rc files. - - # cd /moxa/mxser/driver - # cp ./rc.mxser /etc/rc.d - # cd /etc/rc.d - - Check "rc.serial" is existed or not. If "rc.serial" doesn't exist, - create it by vi, run "chmod 755 rc.serial" to change the permission. - Add "/etc/rc.d/rc.mxser" in last line, - - Reboot and check if moxa.o activated by "lsmod" command. - - 3.4.5. If you'd like to drive Smartio/Industio ISA boards in the system, - you'll have to add parameter to specify CAP address of given - board while activating "mxser.o". The format for parameters are - as follows. - - modprobe mxser ioaddr=0x???,0x???,0x???,0x??? - | | | | - | | | +- 4th ISA board - | | +------ 3rd ISA board - | +------------ 2nd ISA board - +------------------- 1st ISA board - - 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x - - Note: To use static driver, you must install the linux kernel - source package. - - 3.5.1 Backup the built-in driver in the kernel. - # cd /usr/src/linux/drivers/char - # mv mxser.c mxser.c.old - - For Red Hat 7.x user, you need to create link: - # cd /usr/src - # ln -s linux-2.4 linux - - 3.5.2 Create link - # cd /usr/src/linux/drivers/char - # ln -s /moxa/mxser/driver/mxser.c mxser.c - - 3.5.3 Add CAP address list for ISA boards. For PCI boards user, - please skip this step. - - In module mode, the CAP address for ISA board is given by - parameter. In static driver configuration, you'll have to - assign it within driver's source code. If you will not - install any ISA boards, you may skip to next portion. - The instructions to modify driver source code are as - below. - a. # cd /moxa/mxser/driver - # vi mxser.c - b. Find the array mxserBoardCAP[] as below. - - static int mxserBoardCAP[] - = {0x00, 0x00, 0x00, 0x00}; - - c. Change the address within this array using vi. For - example, to driver 2 ISA boards with CAP address - 0x280 and 0x180 as 1st and 2nd board. Just to change - the source code as follows. - - static int mxserBoardCAP[] - = {0x280, 0x180, 0x00, 0x00}; - - 3.5.4 Setup kernel configuration - - Configure the kernel: - - # cd /usr/src/linux - # make menuconfig - - You will go into a menu-driven system. Please select [Character - devices][Non-standard serial port support], enable the [Moxa - SmartIO support] driver with "[*]" for built-in (not "[M]"), then - select [Exit] to exit this program. - - 3.5.5 Rebuild kernel - The following are for Linux kernel rebuilding, for your - reference only. - For appropriate details, please refer to the Linux document. - - a. cd /usr/src/linux - b. make clean /* take a few minutes */ - c. make dep /* take a few minutes */ - d. make bzImage /* take probably 10-20 minutes */ - e. make install /* copy boot image to correct position */ - f. Please make sure the boot kernel (vmlinuz) is in the - correct position. - g. If you use 'lilo' utility, you should check /etc/lilo.conf - 'image' item specified the path which is the 'vmlinuz' path, - or you will load wrong (or old) boot kernel image (vmlinuz). - After checking /etc/lilo.conf, please run "lilo". - - Note that if the result of "make bzImage" is ERROR, then you have to - go back to Linux configuration Setup. Type "make menuconfig" in - directory /usr/src/linux. - - - 3.5.6 Make tty device and special file - # cd /moxa/mxser/driver - # ./msmknod - - 3.5.7 Make utility - # cd /moxa/mxser/utility - # make clean; make install - - 3.5.8 Reboot - - - - 3.6 Custom configuration - Although this driver already provides you default configuration, you - still can change the device name and major number. The instruction to - change these parameters are shown as below. - - Change Device name - ------------------ - If you'd like to use other device names instead of default naming - convention, all you have to do is to modify the internal code - within the shell script "msmknod". First, you have to open "msmknod" - by vi. Locate each line contains "ttyM" and "cum" and change them - to the device name you desired. "msmknod" creates the device names - you need next time executed. - - Change Major number - ------------------- - If major number 30 and 35 had been occupied, you may have to select - 2 free major numbers for this driver. There are 3 steps to change - major numbers. - - 3.6.1 Find free major numbers - In /proc/devices, you may find all the major numbers occupied - in the system. Please select 2 major numbers that are available. - e.g. 40, 45. - 3.6.2 Create special files - Run /moxa/mxser/driver/msmknod to create special files with - specified major numbers. - 3.6.3 Modify driver with new major number - Run vi to open /moxa/mxser/driver/mxser.c. Locate the line - contains "MXSERMAJOR". Change the content as below. - #define MXSERMAJOR 40 - #define MXSERCUMAJOR 45 - 3.6.4 Run "make clean; make install" in /moxa/mxser/driver. - - 3.7 Verify driver installation - You may refer to /var/log/messages to check the latest status - log reported by this driver whenever it's activated. - ------------------------------------------------------------------------------ -4. Utilities - There are 3 utilities contained in this driver. They are msdiag, msmon and - msterm. These 3 utilities are released in form of source code. They should - be compiled into executable file and copied into /usr/bin. - - Before using these utilities, please load driver (refer 3.4 & 3.5) and - make sure you had run the "msmknod" utility. - - msdiag - Diagnostic - -------------------- - This utility provides the function to display what Moxa Smartio/Industio - board found by driver in the system. - - msmon - Port Monitoring - ----------------------- - This utility gives the user a quick view about all the MOXA ports' - activities. One can easily learn each port's total received/transmitted - (Rx/Tx) character count since the time when the monitoring is started. - Rx/Tx throughputs per second are also reported in interval basis (e.g. - the last 5 seconds) and in average basis (since the time the monitoring - is started). You can reset all ports' count by key. <+> <-> - (plus/minus) keys to change the displaying time interval. Press - on the port, that cursor stay, to view the port's communication - parameters, signal status, and input/output queue. - - msterm - Terminal Emulation - --------------------------- - This utility provides data sending and receiving ability of all tty ports, - especially for MOXA ports. It is quite useful for testing simple - application, for example, sending AT command to a modem connected to the - port or used as a terminal for login purpose. Note that this is only a - dumb terminal emulation without handling full screen operation. - ------------------------------------------------------------------------------ -5. Setserial - - Supported Setserial parameters are listed as below. - - uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO) - close_delay set the amount of time(in 1/100 of a second) that DTR - should be kept low while being closed. - closing_wait set the amount of time(in 1/100 of a second) that the - serial port should wait for data to be drained while - being closed, before the receiver is disable. - spd_hi Use 57.6kb when the application requests 38.4kb. - spd_vhi Use 115.2kb when the application requests 38.4kb. - spd_shi Use 230.4kb when the application requests 38.4kb. - spd_warp Use 460.8kb when the application requests 38.4kb. - spd_normal Use 38.4kb when the application requests 38.4kb. - spd_cust Use the custom divisor to set the speed when the - application requests 38.4kb. - divisor This option set the custom divison. - baud_base This option set the base baud rate. - ------------------------------------------------------------------------------ -6. Troubleshooting - - The boot time error messages and solutions are stated as clearly as - possible. If all the possible solutions fail, please contact our technical - support team to get more help. - - - Error msg: More than 4 Moxa Smartio/Industio family boards found. Fifth board - and after are ignored. - Solution: - To avoid this problem, please unplug fifth and after board, because Moxa - driver supports up to 4 boards. - - Error msg: Request_irq fail, IRQ(?) may be conflict with another device. - Solution: - Other PCI or ISA devices occupy the assigned IRQ. If you are not sure - which device causes the situation, please check /proc/interrupts to find - free IRQ and simply change another free IRQ for Moxa board. - - Error msg: Board #: C1xx Series(CAP=xxx) interrupt number invalid. - Solution: - Each port within the same multiport board shares the same IRQ. Please set - one IRQ (IRQ doesn't equal to zero) for one Moxa board. - - Error msg: No interrupt vector be set for Moxa ISA board(CAP=xxx). - Solution: - Moxa ISA board needs an interrupt vector.Please refer to user's manual - "Hardware Installation" chapter to set interrupt vector. - - Error msg: Couldn't install MOXA Smartio/Industio family driver! - Solution: - Load Moxa driver fail, the major number may conflict with other devices. - Please refer to previous section 3.7 to change a free major number for - Moxa driver. - - Error msg: Couldn't install MOXA Smartio/Industio family callout driver! - Solution: - Load Moxa callout driver fail, the callout device major number may - conflict with other devices. Please refer to previous section 3.7 to - change a free callout device major number for Moxa driver. - - ------------------------------------------------------------------------------ - diff --git a/Documentation/nbd.txt b/Documentation/nbd.txt deleted file mode 100644 index aeb93ffe641..00000000000 --- a/Documentation/nbd.txt +++ /dev/null @@ -1,47 +0,0 @@ - Network Block Device (TCP version) - - What is it: With this compiled in the kernel (or as a module), Linux - can use a remote server as one of its block devices. So every time - the client computer wants to read, e.g., /dev/nb0, it sends a - request over TCP to the server, which will reply with the data read. - This can be used for stations with low disk space (or even diskless - - if you boot from floppy) to borrow disk space from another computer. - Unlike NFS, it is possible to put any filesystem on it, etc. It should - even be possible to use NBD as a root filesystem (I've never tried), - but it requires a user-level program to be in the initrd to start. - It also allows you to run block-device in user land (making server - and client physically the same computer, communicating using loopback). - - Current state: It currently works. Network block device is stable. - I originally thought that it was impossible to swap over TCP. It - turned out not to be true - swapping over TCP now works and seems - to be deadlock-free, but it requires heavy patches into Linux's - network layer. - - For more information, or to download the nbd-client and nbd-server - tools, go to http://nbd.sf.net/. - - Howto: To setup nbd, you can simply do the following: - - First, serve a device or file from a remote server: - - nbd-server - - e.g., - root@server1 # nbd-server 1234 /dev/sdb1 - - (serves sdb1 partition on TCP port 1234) - - Then, on the local (client) system: - - nbd-client /dev/nb[0-n] - - e.g., - root@client1 # nbd-client server1 1234 /dev/nb0 - - (creates the nb0 device on client1) - - The nbd kernel module need only be installed on the client - system, as the nbd-server is completely in userspace. In fact, - the nbd-server has been successfully ported to other operating - systems, including Windows. diff --git a/Documentation/paride.txt b/Documentation/paride.txt deleted file mode 100644 index e4312676bdd..00000000000 --- a/Documentation/paride.txt +++ /dev/null @@ -1,417 +0,0 @@ - - Linux and parallel port IDE devices - -PARIDE v1.03 (c) 1997-8 Grant Guenther - -1. Introduction - -Owing to the simplicity and near universality of the parallel port interface -to personal computers, many external devices such as portable hard-disk, -CD-ROM, LS-120 and tape drives use the parallel port to connect to their -host computer. While some devices (notably scanners) use ad-hoc methods -to pass commands and data through the parallel port interface, most -external devices are actually identical to an internal model, but with -a parallel-port adapter chip added in. Some of the original parallel port -adapters were little more than mechanisms for multiplexing a SCSI bus. -(The Iomega PPA-3 adapter used in the ZIP drives is an example of this -approach). Most current designs, however, take a different approach. -The adapter chip reproduces a small ISA or IDE bus in the external device -and the communication protocol provides operations for reading and writing -device registers, as well as data block transfer functions. Sometimes, -the device being addressed via the parallel cable is a standard SCSI -controller like an NCR 5380. The "ditto" family of external tape -drives use the ISA replicator to interface a floppy disk controller, -which is then connected to a floppy-tape mechanism. The vast majority -of external parallel port devices, however, are now based on standard -IDE type devices, which require no intermediate controller. If one -were to open up a parallel port CD-ROM drive, for instance, one would -find a standard ATAPI CD-ROM drive, a power supply, and a single adapter -that interconnected a standard PC parallel port cable and a standard -IDE cable. It is usually possible to exchange the CD-ROM device with -any other device using the IDE interface. - -The document describes the support in Linux for parallel port IDE -devices. It does not cover parallel port SCSI devices, "ditto" tape -drives or scanners. Many different devices are supported by the -parallel port IDE subsystem, including: - - MicroSolutions backpack CD-ROM - MicroSolutions backpack PD/CD - MicroSolutions backpack hard-drives - MicroSolutions backpack 8000t tape drive - SyQuest EZ-135, EZ-230 & SparQ drives - Avatar Shark - Imation Superdisk LS-120 - Maxell Superdisk LS-120 - FreeCom Power CD - Hewlett-Packard 5GB and 8GB tape drives - Hewlett-Packard 7100 and 7200 CD-RW drives - -as well as most of the clone and no-name products on the market. - -To support such a wide range of devices, PARIDE, the parallel port IDE -subsystem, is actually structured in three parts. There is a base -paride module which provides a registry and some common methods for -accessing the parallel ports. The second component is a set of -high-level drivers for each of the different types of supported devices: - - pd IDE disk - pcd ATAPI CD-ROM - pf ATAPI disk - pt ATAPI tape - pg ATAPI generic - -(Currently, the pg driver is only used with CD-R drives). - -The high-level drivers function according to the relevant standards. -The third component of PARIDE is a set of low-level protocol drivers -for each of the parallel port IDE adapter chips. Thanks to the interest -and encouragement of Linux users from many parts of the world, -support is available for almost all known adapter protocols: - - aten ATEN EH-100 (HK) - bpck Microsolutions backpack (US) - comm DataStor (old-type) "commuter" adapter (TW) - dstr DataStor EP-2000 (TW) - epat Shuttle EPAT (UK) - epia Shuttle EPIA (UK) - fit2 FIT TD-2000 (US) - fit3 FIT TD-3000 (US) - friq Freecom IQ cable (DE) - frpw Freecom Power (DE) - kbic KingByte KBIC-951A and KBIC-971A (TW) - ktti KT Technology PHd adapter (SG) - on20 OnSpec 90c20 (US) - on26 OnSpec 90c26 (US) - - -2. Using the PARIDE subsystem - -While configuring the Linux kernel, you may choose either to build -the PARIDE drivers into your kernel, or to build them as modules. - -In either case, you will need to select "Parallel port IDE device support" -as well as at least one of the high-level drivers and at least one -of the parallel port communication protocols. If you do not know -what kind of parallel port adapter is used in your drive, you could -begin by checking the file names and any text files on your DOS -installation floppy. Alternatively, you can look at the markings on -the adapter chip itself. That's usually sufficient to identify the -correct device. - -You can actually select all the protocol modules, and allow the PARIDE -subsystem to try them all for you. - -For the "brand-name" products listed above, here are the protocol -and high-level drivers that you would use: - - Manufacturer Model Driver Protocol - - MicroSolutions CD-ROM pcd bpck - MicroSolutions PD drive pf bpck - MicroSolutions hard-drive pd bpck - MicroSolutions 8000t tape pt bpck - SyQuest EZ, SparQ pd epat - Imation Superdisk pf epat - Maxell Superdisk pf friq - Avatar Shark pd epat - FreeCom CD-ROM pcd frpw - Hewlett-Packard 5GB Tape pt epat - Hewlett-Packard 7200e (CD) pcd epat - Hewlett-Packard 7200e (CD-R) pg epat - -2.1 Configuring built-in drivers - -We recommend that you get to know how the drivers work and how to -configure them as loadable modules, before attempting to compile a -kernel with the drivers built-in. - -If you built all of your PARIDE support directly into your kernel, -and you have just a single parallel port IDE device, your kernel should -locate it automatically for you. If you have more than one device, -you may need to give some command line options to your bootloader -(eg: LILO), how to do that is beyond the scope of this document. - -The high-level drivers accept a number of command line parameters, all -of which are documented in the source files in linux/drivers/block/paride. -By default, each driver will automatically try all parallel ports it -can find, and all protocol types that have been installed, until it finds -a parallel port IDE adapter. Once it finds one, the probe stops. So, -if you have more than one device, you will need to tell the drivers -how to identify them. This requires specifying the port address, the -protocol identification number and, for some devices, the drive's -chain ID. While your system is booting, a number of messages are -displayed on the console. Like all such messages, they can be -reviewed with the 'dmesg' command. Among those messages will be -some lines like: - - paride: bpck registered as protocol 0 - paride: epat registered as protocol 1 - -The numbers will always be the same until you build a new kernel with -different protocol selections. You should note these numbers as you -will need them to identify the devices. - -If you happen to be using a MicroSolutions backpack device, you will -also need to know the unit ID number for each drive. This is usually -the last two digits of the drive's serial number (but read MicroSolutions' -documentation about this). - -As an example, let's assume that you have a MicroSolutions PD/CD drive -with unit ID number 36 connected to the parallel port at 0x378, a SyQuest -EZ-135 connected to the chained port on the PD/CD drive and also an -Imation Superdisk connected to port 0x278. You could give the following -options on your boot command: - - pd.drive0=0x378,1 pf.drive0=0x278,1 pf.drive1=0x378,0,36 - -In the last option, pf.drive1 configures device /dev/pf1, the 0x378 -is the parallel port base address, the 0 is the protocol registration -number and 36 is the chain ID. - -Please note: while PARIDE will work both with and without the -PARPORT parallel port sharing system that is included by the -"Parallel port support" option, PARPORT must be included and enabled -if you want to use chains of devices on the same parallel port. - -2.2 Loading and configuring PARIDE as modules - -It is much faster and simpler to get to understand the PARIDE drivers -if you use them as loadable kernel modules. - -Note 1: using these drivers with the "kerneld" automatic module loading -system is not recommended for beginners, and is not documented here. - -Note 2: if you build PARPORT support as a loadable module, PARIDE must -also be built as loadable modules, and PARPORT must be loaded before the -PARIDE modules. - -To use PARIDE, you must begin by - - insmod paride - -this loads a base module which provides a registry for the protocols, -among other tasks. - -Then, load as many of the protocol modules as you think you might need. -As you load each module, it will register the protocols that it supports, -and print a log message to your kernel log file and your console. For -example: - - # insmod epat - paride: epat registered as protocol 0 - # insmod kbic - paride: k951 registered as protocol 1 - paride: k971 registered as protocol 2 - -Finally, you can load high-level drivers for each kind of device that -you have connected. By default, each driver will autoprobe for a single -device, but you can support up to four similar devices by giving their -individual co-ordinates when you load the driver. - -For example, if you had two no-name CD-ROM drives both using the -KingByte KBIC-951A adapter, one on port 0x378 and the other on 0x3bc -you could give the following command: - - # insmod pcd drive0=0x378,1 drive1=0x3bc,1 - -For most adapters, giving a port address and protocol number is sufficient, -but check the source files in linux/drivers/block/paride for more -information. (Hopefully someone will write some man pages one day !). - -As another example, here's what happens when PARPORT is installed, and -a SyQuest EZ-135 is attached to port 0x378: - - # insmod paride - paride: version 1.0 installed - # insmod epat - paride: epat registered as protocol 0 - # insmod pd - pd: pd version 1.0, major 45, cluster 64, nice 0 - pda: Sharing parport1 at 0x378 - pda: epat 1.0, Shuttle EPAT chip c3 at 0x378, mode 5 (EPP-32), delay 1 - pda: SyQuest EZ135A, 262144 blocks [128M], (512/16/32), removable media - pda: pda1 - -Note that the last line is the output from the generic partition table -scanner - in this case it reports that it has found a disk with one partition. - -2.3 Using a PARIDE device - -Once the drivers have been loaded, you can access PARIDE devices in the -same way as their traditional counterparts. You will probably need to -create the device "special files". Here is a simple script that you can -cut to a file and execute: - -#!/bin/bash -# -# mkd -- a script to create the device special files for the PARIDE subsystem -# -function mkdev { - mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1 -} -# -function pd { - D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) ) - mkdev pd$D b 45 $[ $1 * 16 ] - for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 - do mkdev pd$D$P b 45 $[ $1 * 16 + $P ] - done -} -# -cd /dev -# -for u in 0 1 2 3 ; do pd $u ; done -for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done -for u in 0 1 2 3 ; do mkdev pf$u b 47 $u ; done -for u in 0 1 2 3 ; do mkdev pt$u c 96 $u ; done -for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done -for u in 0 1 2 3 ; do mkdev pg$u c 97 $u ; done -# -# end of mkd - -With the device files and drivers in place, you can access PARIDE devices -like any other Linux device. For example, to mount a CD-ROM in pcd0, use: - - mount /dev/pcd0 /cdrom - -If you have a fresh Avatar Shark cartridge, and the drive is pda, you -might do something like: - - fdisk /dev/pda -- make a new partition table with - partition 1 of type 83 - - mke2fs /dev/pda1 -- to build the file system - - mkdir /shark -- make a place to mount the disk - - mount /dev/pda1 /shark - -Devices like the Imation superdisk work in the same way, except that -they do not have a partition table. For example to make a 120MB -floppy that you could share with a DOS system: - - mkdosfs /dev/pf0 - mount /dev/pf0 /mnt - - -2.4 The pf driver - -The pf driver is intended for use with parallel port ATAPI disk -devices. The most common devices in this category are PD drives -and LS-120 drives. Traditionally, media for these devices are not -partitioned. Consequently, the pf driver does not support partitioned -media. This may be changed in a future version of the driver. - -2.5 Using the pt driver - -The pt driver for parallel port ATAPI tape drives is a minimal driver. -It does not yet support many of the standard tape ioctl operations. -For best performance, a block size of 32KB should be used. You will -probably want to set the parallel port delay to 0, if you can. - -2.6 Using the pg driver - -The pg driver can be used in conjunction with the cdrecord program -to create CD-ROMs. Please get cdrecord version 1.6.1 or later -from ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/ . To record CD-R media -your parallel port should ideally be set to EPP mode, and the "port delay" -should be set to 0. With those settings it is possible to record at 2x -speed without any buffer underruns. If you cannot get the driver to work -in EPP mode, try to use "bidirectional" or "PS/2" mode and 1x speeds only. - - -3. Troubleshooting - -3.1 Use EPP mode if you can - -The most common problems that people report with the PARIDE drivers -concern the parallel port CMOS settings. At this time, none of the -PARIDE protocol modules support ECP mode, or any ECP combination modes. -If you are able to do so, please set your parallel port into EPP mode -using your CMOS setup procedure. - -3.2 Check the port delay - -Some parallel ports cannot reliably transfer data at full speed. To -offset the errors, the PARIDE protocol modules introduce a "port -delay" between each access to the i/o ports. Each protocol sets -a default value for this delay. In most cases, the user can override -the default and set it to 0 - resulting in somewhat higher transfer -rates. In some rare cases (especially with older 486 systems) the -default delays are not long enough. if you experience corrupt data -transfers, or unexpected failures, you may wish to increase the -port delay. The delay can be programmed using the "driveN" parameters -to each of the high-level drivers. Please see the notes above, or -read the comments at the beginning of the driver source files in -linux/drivers/block/paride. - -3.3 Some drives need a printer reset - -There appear to be a number of "noname" external drives on the market -that do not always power up correctly. We have noticed this with some -drives based on OnSpec and older Freecom adapters. In these rare cases, -the adapter can often be reinitialised by issuing a "printer reset" on -the parallel port. As the reset operation is potentially disruptive in -multiple device environments, the PARIDE drivers will not do it -automatically. You can however, force a printer reset by doing: - - insmod lp reset=1 - rmmod lp - -If you have one of these marginal cases, you should probably build -your paride drivers as modules, and arrange to do the printer reset -before loading the PARIDE drivers. - -3.4 Use the verbose option and dmesg if you need help - -While a lot of testing has gone into these drivers to make them work -as smoothly as possible, problems will arise. If you do have problems, -please check all the obvious things first: does the drive work in -DOS with the manufacturer's drivers ? If that doesn't yield any useful -clues, then please make sure that only one drive is hooked to your system, -and that either (a) PARPORT is enabled or (b) no other device driver -is using your parallel port (check in /proc/ioports). Then, load the -appropriate drivers (you can load several protocol modules if you want) -as in: - - # insmod paride - # insmod epat - # insmod bpck - # insmod kbic - ... - # insmod pd verbose=1 - -(using the correct driver for the type of device you have, of course). -The verbose=1 parameter will cause the drivers to log a trace of their -activity as they attempt to locate your drive. - -Use 'dmesg' to capture a log of all the PARIDE messages (any messages -beginning with paride:, a protocol module's name or a driver's name) and -include that with your bug report. You can submit a bug report in one -of two ways. Either send it directly to the author of the PARIDE suite, -by e-mail to grant@torque.net, or join the linux-parport mailing list -and post your report there. - -3.5 For more information or help - -You can join the linux-parport mailing list by sending a mail message -to - linux-parport-request@torque.net - -with the single word - - subscribe - -in the body of the mail message (not in the subject line). Please be -sure that your mail program is correctly set up when you do this, as -the list manager is a robot that will subscribe you using the reply -address in your mail headers. REMOVE any anti-spam gimmicks you may -have in your mail headers, when sending mail to the list server. - -You might also find some useful information on the linux-parport -web pages (although they are not always up to date) at - - http://www.torque.net/parport/ - - diff --git a/Documentation/ramdisk.txt b/Documentation/ramdisk.txt deleted file mode 100644 index 6c820baa19a..00000000000 --- a/Documentation/ramdisk.txt +++ /dev/null @@ -1,165 +0,0 @@ -Using the RAM disk block device with Linux ------------------------------------------- - -Contents: - - 1) Overview - 2) Kernel Command Line Parameters - 3) Using "rdev -r" - 4) An Example of Creating a Compressed RAM Disk - - -1) Overview ------------ - -The RAM disk driver is a way to use main system memory as a block device. It -is required for initrd, an initial filesystem used if you need to load modules -in order to access the root filesystem (see Documentation/initrd.txt). It can -also be used for a temporary filesystem for crypto work, since the contents -are erased on reboot. - -The RAM disk dynamically grows as more space is required. It does this by using -RAM from the buffer cache. The driver marks the buffers it is using as dirty -so that the VM subsystem does not try to reclaim them later. - -The RAM disk supports up to 16 RAM disks by default, and can be reconfigured -to support an unlimited number of RAM disks (at your own risk). Just change -the configuration symbol BLK_DEV_RAM_COUNT in the Block drivers config menu -and (re)build the kernel. - -To use RAM disk support with your system, run './MAKEDEV ram' from the /dev -directory. RAM disks are all major number 1, and start with minor number 0 -for /dev/ram0, etc. If used, modern kernels use /dev/ram0 for an initrd. - -The new RAM disk also has the ability to load compressed RAM disk images, -allowing one to squeeze more programs onto an average installation or -rescue floppy disk. - - -2) Kernel Command Line Parameters ---------------------------------- - - ramdisk_size=N - ============== - -This parameter tells the RAM disk driver to set up RAM disks of N k size. The -default is 4096 (4 MB) (8192 (8 MB) on S390). - - ramdisk_blocksize=N - =================== - -This parameter tells the RAM disk driver how many bytes to use per block. The -default is 1024 (BLOCK_SIZE). - - -3) Using "rdev -r" ------------------- - -The usage of the word (two bytes) that "rdev -r" sets in the kernel image is -as follows. The low 11 bits (0 -> 10) specify an offset (in 1 k blocks) of up -to 2 MB (2^11) of where to find the RAM disk (this used to be the size). Bit -14 indicates that a RAM disk is to be loaded, and bit 15 indicates whether a -prompt/wait sequence is to be given before trying to read the RAM disk. Since -the RAM disk dynamically grows as data is being written into it, a size field -is not required. Bits 11 to 13 are not currently used and may as well be zero. -These numbers are no magical secrets, as seen below: - -./arch/i386/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK 0x07FF -./arch/i386/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000 -./arch/i386/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000 - -Consider a typical two floppy disk setup, where you will have the -kernel on disk one, and have already put a RAM disk image onto disk #2. - -Hence you want to set bits 0 to 13 as 0, meaning that your RAM disk -starts at an offset of 0 kB from the beginning of the floppy. -The command line equivalent is: "ramdisk_start=0" - -You want bit 14 as one, indicating that a RAM disk is to be loaded. -The command line equivalent is: "load_ramdisk=1" - -You want bit 15 as one, indicating that you want a prompt/keypress -sequence so that you have a chance to switch floppy disks. -The command line equivalent is: "prompt_ramdisk=1" - -Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word. -So to create disk one of the set, you would do: - - /usr/src/linux# cat arch/i386/boot/zImage > /dev/fd0 - /usr/src/linux# rdev /dev/fd0 /dev/fd0 - /usr/src/linux# rdev -r /dev/fd0 49152 - -If you make a boot disk that has LILO, then for the above, you would use: - append = "ramdisk_start=0 load_ramdisk=1 prompt_ramdisk=1" -Since the default start = 0 and the default prompt = 1, you could use: - append = "load_ramdisk=1" - - -4) An Example of Creating a Compressed RAM Disk ----------------------------------------------- - -To create a RAM disk image, you will need a spare block device to -construct it on. This can be the RAM disk device itself, or an -unused disk partition (such as an unmounted swap partition). For this -example, we will use the RAM disk device, "/dev/ram0". - -Note: This technique should not be done on a machine with less than 8 MB -of RAM. If using a spare disk partition instead of /dev/ram0, then this -restriction does not apply. - -a) Decide on the RAM disk size that you want. Say 2 MB for this example. - Create it by writing to the RAM disk device. (This step is not currently - required, but may be in the future.) It is wise to zero out the - area (esp. for disks) so that maximal compression is achieved for - the unused blocks of the image that you are about to create. - - dd if=/dev/zero of=/dev/ram0 bs=1k count=2048 - -b) Make a filesystem on it. Say ext2fs for this example. - - mke2fs -vm0 /dev/ram0 2048 - -c) Mount it, copy the files you want to it (eg: /etc/* /dev/* ...) - and unmount it again. - -d) Compress the contents of the RAM disk. The level of compression - will be approximately 50% of the space used by the files. Unused - space on the RAM disk will compress to almost nothing. - - dd if=/dev/ram0 bs=1k count=2048 | gzip -v9 > /tmp/ram_image.gz - -e) Put the kernel onto the floppy - - dd if=zImage of=/dev/fd0 bs=1k - -f) Put the RAM disk image onto the floppy, after the kernel. Use an offset - that is slightly larger than the kernel, so that you can put another - (possibly larger) kernel onto the same floppy later without overlapping - the RAM disk image. An offset of 400 kB for kernels about 350 kB in - size would be reasonable. Make sure offset+size of ram_image.gz is - not larger than the total space on your floppy (usually 1440 kB). - - dd if=/tmp/ram_image.gz of=/dev/fd0 bs=1k seek=400 - -g) Use "rdev" to set the boot device, RAM disk offset, prompt flag, etc. - For prompt_ramdisk=1, load_ramdisk=1, ramdisk_start=400, one would - have 2^15 + 2^14 + 400 = 49552. - - rdev /dev/fd0 /dev/fd0 - rdev -r /dev/fd0 49552 - -That is it. You now have your boot/root compressed RAM disk floppy. Some -users may wish to combine steps (d) and (f) by using a pipe. - --------------------------------------------------------------------------- - Paul Gortmaker 12/95 - -Changelog: ----------- - -10-22-04 : Updated to reflect changes in command line options, remove - obsolete references, general cleanup. - James Nelson (james4765@gmail.com) - - -12-95 : Original Document diff --git a/Documentation/riscom8.txt b/Documentation/riscom8.txt deleted file mode 100644 index 14f61fdad7c..00000000000 --- a/Documentation/riscom8.txt +++ /dev/null @@ -1,36 +0,0 @@ -* NOTE - this is an unmaintained driver. The original author cannot be located. - -SDL Communications is now SBS Technologies, and does not have any -information on these ancient ISA cards on their website. - -James Nelson - 12-12-2004 - - This is the README for RISCom/8 multi-port serial driver - (C) 1994-1996 D.Gorodchanin - See file LICENSE for terms and conditions. - -NOTE: English is not my native language. - I'm sorry for any mistakes in this text. - -Misc. notes for RISCom/8 serial driver, in no particular order :) - -1) This driver can support up to 4 boards at time. - Use string "riscom8=0xXXX,0xXXX,0xXXX,0xXXX" at LILO prompt, for - setting I/O base addresses for boards. If you compile driver - as module use modprobe options "iobase=0xXXX iobase1=0xXXX iobase2=..." - -2) The driver partially supports famous 'setserial' program, you can use almost - any of its options, excluding port & irq settings. - -3) There are some misc. defines at the beginning of riscom8.c, please read the - comments and try to change some of them in case of problems. - -4) I consider the current state of the driver as BETA. - -5) SDL Communications WWW page is http://www.sdlcomm.com. - -6) You can use the MAKEDEV program to create RISCom/8 /dev/ttyL* entries. - -7) Minor numbers for first board are 0-7, for second 8-15, etc. - -22 Apr 1996. diff --git a/Documentation/rocket.txt b/Documentation/rocket.txt deleted file mode 100644 index 1d858299043..00000000000 --- a/Documentation/rocket.txt +++ /dev/null @@ -1,189 +0,0 @@ -Comtrol(tm) RocketPort(R)/RocketModem(TM) Series -Device Driver for the Linux Operating System - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - -PRODUCT OVERVIEW ----------------- - -This driver provides a loadable kernel driver for the Comtrol RocketPort -and RocketModem PCI boards. These boards provide, 2, 4, 8, 16, or 32 -high-speed serial ports or modems. This driver supports up to a combination -of four RocketPort or RocketModems boards in one machine simultaneously. -This file assumes that you are using the RocketPort driver which is -integrated into the kernel sources. - -The driver can also be installed as an external module using the usual -"make;make install" routine. This external module driver, obtainable -from the Comtrol website listed below, is useful for updating the driver -or installing it into kernels which do not have the driver configured -into them. Installations instructions for the external module -are in the included README and HW_INSTALL files. - -RocketPort ISA and RocketModem II PCI boards currently are only supported by -this driver in module form. - -The RocketPort ISA board requires I/O ports to be configured by the DIP -switches on the board. See the section "ISA Rocketport Boards" below for -information on how to set the DIP switches. - -You pass the I/O port to the driver using the following module parameters: - -board1 : I/O port for the first ISA board -board2 : I/O port for the second ISA board -board3 : I/O port for the third ISA board -board4 : I/O port for the fourth ISA board - -There is a set of utilities and scripts provided with the external driver -( downloadable from http://www.comtrol.com ) that ease the configuration and -setup of the ISA cards. - -The RocketModem II PCI boards require firmware to be loaded into the card -before it will function. The driver has only been tested as a module for this -board. - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - -INSTALLATION PROCEDURES ------------------------ - -RocketPort/RocketModem PCI cards require no driver configuration, they are -automatically detected and configured. - -The RocketPort driver can be installed as a module (recommended) or built -into the kernel. This is selected, as for other drivers, through the `make config` -command from the root of the Linux source tree during the kernel build process. - -The RocketPort/RocketModem serial ports installed by this driver are assigned -device major number 46, and will be named /dev/ttyRx, where x is the port number -starting at zero (ex. /dev/ttyR0, /devttyR1, ...). If you have multiple cards -installed in the system, the mapping of port names to serial ports is displayed -in the system log at /var/log/messages. - -If installed as a module, the module must be loaded. This can be done -manually by entering "modprobe rocket". To have the module loaded automatically -upon system boot, edit the /etc/modprobe.conf file and add the line -"alias char-major-46 rocket". - -In order to use the ports, their device names (nodes) must be created with mknod. -This is only required once, the system will retain the names once created. To -create the RocketPort/RocketModem device names, use the command -"mknod /dev/ttyRx c 46 x" where x is the port number starting at zero. For example: - ->mknod /dev/ttyR0 c 46 0 ->mknod /dev/ttyR1 c 46 1 ->mknod /dev/ttyR2 c 46 2 - -The Linux script MAKEDEV will create the first 16 ttyRx device names (nodes) -for you: - ->/dev/MAKEDEV ttyR - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - -ISA Rocketport Boards ---------------------- - -You must assign and configure the I/O addresses used by the ISA Rocketport -card before installing and using it. This is done by setting a set of DIP -switches on the Rocketport board. - - -SETTING THE I/O ADDRESS ------------------------ - -Before installing RocketPort(R) or RocketPort RA boards, you must find -a range of I/O addresses for it to use. The first RocketPort card -requires a 68-byte contiguous block of I/O addresses, starting at one -of the following: 0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h, -0x300h, 0x340h, 0x380h. This I/O address must be reflected in the DIP -switches of *all* of the Rocketport cards. - -The second, third, and fourth RocketPort cards require a 64-byte -contiguous block of I/O addresses, starting at one of the following -I/O addresses: 0x100h, 0x140h, 0x180h, 0x1C0h, 0x200h, 0x240h, 0x280h, -0x2C0h, 0x300h, 0x340h, 0x380h, 0x3C0h. The I/O address used by the -second, third, and fourth Rocketport cards (if present) are set via -software control. The DIP switch settings for the I/O address must be -set to the value of the first Rocketport cards. - -In order to distinguish each of the card from the others, each card -must have a unique board ID set on the dip switches. The first -Rocketport board must be set with the DIP switches corresponding to -the first board, the second board must be set with the DIP switches -corresponding to the second board, etc. IMPORTANT: The board ID is -the only place where the DIP switch settings should differ between the -various Rocketport boards in a system. - -The I/O address range used by any of the RocketPort cards must not -conflict with any other cards in the system, including other -RocketPort cards. Below, you will find a list of commonly used I/O -address ranges which may be in use by other devices in your system. -On a Linux system, "cat /proc/ioports" will also be helpful in -identifying what I/O addresses are being used by devices on your -system. - -Remember, the FIRST RocketPort uses 68 I/O addresses. So, if you set it -for 0x100, it will occupy 0x100 to 0x143. This would mean that you -CAN NOT set the second, third or fourth board for address 0x140 since -the first 4 bytes of that range are used by the first board. You would -need to set the second, third, or fourth board to one of the next available -blocks such as 0x180. - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - -RocketPort and RocketPort RA SW1 Settings: - - +-------------------------------+ - | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | - +-------+-------+---------------+ - | Unused| Card | I/O Port Block| - +-------------------------------+ - -DIP Switches DIP Switches -7 8 6 5 -=================== =================== -On On UNUSED, MUST BE ON. On On First Card <==== Default - On Off Second Card - Off On Third Card - Off Off Fourth Card - -DIP Switches I/O Address Range -4 3 2 1 Used by the First Card -===================================== -On Off On Off 100-143 -On Off Off On 140-183 -On Off Off Off 180-1C3 <==== Default -Off On On Off 200-243 -Off On Off On 240-283 -Off On Off Off 280-2C3 -Off Off On Off 300-343 -Off Off Off On 340-383 -Off Off Off Off 380-3C3 - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - -REPORTING BUGS --------------- - -For technical support, please provide the following -information: Driver version, kernel release, distribution of -kernel, and type of board you are using. Error messages and log -printouts port configuration details are especially helpful. - -USA - Phone: (612) 494-4100 - FAX: (612) 494-4199 - email: support@comtrol.com - -Comtrol Europe - Phone: +44 (0) 1 869 323-220 - FAX: +44 (0) 1 869 323-211 - email: support@comtrol.co.uk - -Web: http://www.comtrol.com -FTP: ftp.comtrol.com - -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- - - diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX new file mode 100644 index 00000000000..07dcdb0d2a3 --- /dev/null +++ b/Documentation/serial/00-INDEX @@ -0,0 +1,24 @@ +00-INDEX + - this file. +README.cycladesZ + - info on Cyclades-Z firmware loading. +computone.txt + - info on Computone Intelliport II/Plus Multiport Serial Driver. +digiepca.txt + - info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards. +hayes-esp.txt + - info on using the Hayes ESP serial driver. +moxa-smartio + - file with info on installing/using Moxa multiport serial driver. +riscom8.txt + - notes on using the RISCom/8 multi-port serial driver. +rocket.txt + - info on the Comtrol RocketPort multiport serial driver. +specialix.txt + - info on hardware/driver for specialix IO8+ multiport serial card. +stallion.txt + - info on using the Stallion multiport serial driver. +sx.txt + - info on the Specialix SX/SI multiport serial driver. +tty.txt + - guide to the locking policies of the tty layer. diff --git a/Documentation/serial/README.cycladesZ b/Documentation/serial/README.cycladesZ new file mode 100644 index 00000000000..024a69443cc --- /dev/null +++ b/Documentation/serial/README.cycladesZ @@ -0,0 +1,8 @@ + +The Cyclades-Z must have firmware loaded onto the card before it will +operate. This operation should be performed during system startup, + +The firmware, loader program and the latest device driver code are +available from Cyclades at + ftp://ftp.cyclades.com/pub/cyclades/cyclades-z/linux/ + diff --git a/Documentation/serial/computone.txt b/Documentation/serial/computone.txt new file mode 100644 index 00000000000..c57ea4781e5 --- /dev/null +++ b/Documentation/serial/computone.txt @@ -0,0 +1,522 @@ +NOTE: This is an unmaintained driver. It is not guaranteed to work due to +changes made in the tty layer in 2.6. If you wish to take over maintenance of +this driver, contact Michael Warfield . + +Changelog: +---------- +11-01-2001: Original Document + +10-29-2004: Minor misspelling & format fix, update status of driver. + James Nelson + +Computone Intelliport II/Plus Multiport Serial Driver +----------------------------------------------------- + +Release Notes For Linux Kernel 2.2 and higher. +These notes are for the drivers which have already been integrated into the +kernel and have been tested on Linux kernels 2.0, 2.2, 2.3, and 2.4. + +Version: 1.2.14 +Date: 11/01/2001 +Historical Author: Andrew Manison +Primary Author: Doug McNash +Support: support@computone.com +Fixes and Updates: Mike Warfield + +This file assumes that you are using the Computone drivers which are +integrated into the kernel sources. For updating the drivers or installing +drivers into kernels which do not already have Computone drivers, please +refer to the instructions in the README.computone file in the driver patch. + + +1. INTRODUCTION + +This driver supports the entire family of Intelliport II/Plus controllers +with the exception of the MicroChannel controllers. It does not support +products previous to the Intelliport II. + +This driver was developed on the v2.0.x Linux tree and has been tested up +to v2.4.14; it will probably not work with earlier v1.X kernels,. + + +2. QUICK INSTALLATION + +Hardware - If you have an ISA card, find a free interrupt and io port. + List those in use with `cat /proc/interrupts` and + `cat /proc/ioports`. Set the card dip switches to a free + address. You may need to configure your BIOS to reserve an + irq for an ISA card. PCI and EISA parameters are set + automagically. Insert card into computer with the power off + before or after drivers installation. + + Note the hardware address from the Computone ISA cards installed into + the system. These are required for editing ip2.c or editing + /etc/modprobe.conf, or for specification on the modprobe + command line. + + Note that the /etc/modules.conf should be used for older (pre-2.6) + kernels. + +Software - + +Module installation: + +a) Determine free irq/address to use if any (configure BIOS if need be) +b) Run "make config" or "make menuconfig" or "make xconfig" + Select (m) module for CONFIG_COMPUTONE under character + devices. CONFIG_PCI and CONFIG_MODULES also may need to be set. +c) Set address on ISA cards then: + edit /usr/src/linux/drivers/char/ip2.c if needed + or + edit /etc/modprobe.conf if needed (module). + or both to match this setting. +d) Run "make modules" +e) Run "make modules_install" +f) Run "/sbin/depmod -a" +g) install driver using `modprobe ip2 ` (options listed below) +h) run ip2mkdev (either the script below or the binary version) + + +Kernel installation: + +a) Determine free irq/address to use if any (configure BIOS if need be) +b) Run "make config" or "make menuconfig" or "make xconfig" + Select (y) kernel for CONFIG_COMPUTONE under character + devices. CONFIG_PCI may need to be set if you have PCI bus. +c) Set address on ISA cards then: + edit /usr/src/linux/drivers/char/ip2.c + (Optional - may be specified on kernel command line now) +d) Run "make zImage" or whatever target you prefer. +e) mv /usr/src/linux/arch/i386/boot/zImage to /boot. +f) Add new config for this kernel into /etc/lilo.conf, run "lilo" + or copy to a floppy disk and boot from that floppy disk. +g) Reboot using this kernel +h) run ip2mkdev (either the script below or the binary version) + +Kernel command line options: + +When compiling the driver into the kernel, io and irq may be +compiled into the driver by editing ip2.c and setting the values for +io and irq in the appropriate array. An alternative is to specify +a command line parameter to the kernel at boot up. + + ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 + +Note that this order is very different from the specifications for the +modload parameters which have separate IRQ and IO specifiers. + +The io port also selects PCI (1) and EISA (2) boards. + + io=0 No board + io=1 PCI board + io=2 EISA board + else ISA board io address + +You only need to specify the boards which are present. + + Examples: + + 2 PCI boards: + + ip2=1,0,1,0 + + 1 ISA board at 0x310 irq 5: + + ip2=0x310,5 + +This can be added to and "append" option in lilo.conf similar to this: + + append="ip2=1,0,1,0" + + +3. INSTALLATION + +Previously, the driver sources were packaged with a set of patch files +to update the character drivers' makefile and configuration file, and other +kernel source files. A build script (ip2build) was included which applies +the patches if needed, and build any utilities needed. +What you receive may be a single patch file in conventional kernel +patch format build script. That form can also be applied by +running patch -p1 < ThePatchFile. Otherwise run ip2build. + +The driver can be installed as a module (recommended) or built into the +kernel. This is selected as for other drivers through the `make config` +command from the root of the Linux source tree. If the driver is built +into the kernel you will need to edit the file ip2.c to match the boards +you are installing. See that file for instructions. If the driver is +installed as a module the configuration can also be specified on the +modprobe command line as follows: + + modprobe ip2 irq=irq1,irq2,irq3,irq4 io=addr1,addr2,addr3,addr4 + +where irqnum is one of the valid Intelliport II interrupts (3,4,5,7,10,11, +12,15) and addr1-4 are the base addresses for up to four controllers. If +the irqs are not specified the driver uses the default in ip2.c (which +selects polled mode). If no base addresses are specified the defaults in +ip2.c are used. If you are autoloading the driver module with kerneld or +kmod the base addresses and interrupt number must also be set in ip2.c +and recompile or just insert and options line in /etc/modprobe.conf or both. +The options line is equivalent to the command line and takes precedence over +what is in ip2.c. + +/etc/modprobe.conf sample: + options ip2 io=1,0x328 irq=1,10 + alias char-major-71 ip2 + alias char-major-72 ip2 + alias char-major-73 ip2 + +The equivalent in ip2.c: + +static int io[IP2_MAX_BOARDS]= { 1, 0x328, 0, 0 }; +static int irq[IP2_MAX_BOARDS] = { 1, 10, -1, -1 }; + +The equivalent for the kernel command line (in lilo.conf): + + append="ip2=1,1,0x328,10" + + +Note: Both io and irq should be updated to reflect YOUR system. An "io" + address of 1 or 2 indicates a PCI or EISA card in the board table. + The PCI or EISA irq will be assigned automatically. + +Specifying an invalid or in-use irq will default the driver into +running in polled mode for that card. If all irq entries are 0 then +all cards will operate in polled mode. + +If you select the driver as part of the kernel run : + + make zlilo (or whatever you do to create a bootable kernel) + +If you selected a module run : + + make modules && make modules_install + +The utility ip2mkdev (see 5 and 7 below) creates all the device nodes +required by the driver. For a device to be created it must be configured +in the driver and the board must be installed. Only devices corresponding +to real IntelliPort II ports are created. With multiple boards and expansion +boxes this will leave gaps in the sequence of device names. ip2mkdev uses +Linux tty naming conventions: ttyF0 - ttyF255 for normal devices, and +cuf0 - cuf255 for callout devices. + + +4. USING THE DRIVERS + +As noted above, the driver implements the ports in accordance with Linux +conventions, and the devices should be interchangeable with the standard +serial devices. (This is a key point for problem reporting: please make +sure that what you are trying do works on the ttySx/cuax ports first; then +tell us what went wrong with the ip2 ports!) + +Higher speeds can be obtained using the setserial utility which remaps +38,400 bps (extb) to 57,600 bps, 115,200 bps, or a custom speed. +Intelliport II installations using the PowerPort expansion module can +use the custom speed setting to select the highest speeds: 153,600 bps, +230,400 bps, 307,200 bps, 460,800bps and 921,600 bps. The base for +custom baud rate configuration is fixed at 921,600 for cards/expansion +modules with ST654's and 115200 for those with Cirrus CD1400's. This +corresponds to the maximum bit rates those chips are capable. +For example if the baud base is 921600 and the baud divisor is 18 then +the custom rate is 921600/18 = 51200 bps. See the setserial man page for +complete details. Of course if stty accepts the higher rates now you can +use that as well as the standard ioctls(). + + +5. ip2mkdev and assorted utilities... + +Several utilities, including the source for a binary ip2mkdev utility are +available under .../drivers/char/ip2. These can be build by changing to +that directory and typing "make" after the kernel has be built. If you do +not wish to compile the binary utilities, the shell script below can be +cut out and run as "ip2mkdev" to create the necessary device files. To +use the ip2mkdev script, you must have procfs enabled and the proc file +system mounted on /proc. + + +6. NOTES + +This is a release version of the driver, but it is impossible to test it +in all configurations of Linux. If there is any anomalous behaviour that +does not match the standard serial port's behaviour please let us know. + + +7. ip2mkdev shell script + +Previously, this script was simply attached here. It is now attached as a +shar archive to make it easier to extract the script from the documentation. +To create the ip2mkdev shell script change to a convenient directory (/tmp +works just fine) and run the following command: + + unshar Documentation/serial/computone.txt + (This file) + +You should now have a file ip2mkdev in your current working directory with +permissions set to execute. Running that script with then create the +necessary devices for the Computone boards, interfaces, and ports which +are present on you system at the time it is run. + + +#!/bin/sh +# This is a shell archive (produced by GNU sharutils 4.2.1). +# To extract the files from this archive, save it to some FILE, remove +# everything before the `!/bin/sh' line above, then type `sh FILE'. +# +# Made on 2001-10-29 10:32 EST by . +# Source directory was `/home2/src/tmp'. +# +# Existing files will *not* be overwritten unless `-c' is specified. +# +# This shar contains: +# length mode name +# ------ ---------- ------------------------------------------ +# 4251 -rwxr-xr-x ip2mkdev +# +save_IFS="${IFS}" +IFS="${IFS}:" +gettext_dir=FAILED +locale_dir=FAILED +first_param="$1" +for dir in $PATH +do + if test "$gettext_dir" = FAILED && test -f $dir/gettext \ + && ($dir/gettext --version >/dev/null 2>&1) + then + set `$dir/gettext --version 2>&1` + if test "$3" = GNU + then + gettext_dir=$dir + fi + fi + if test "$locale_dir" = FAILED && test -f $dir/shar \ + && ($dir/shar --print-text-domain-dir >/dev/null 2>&1) + then + locale_dir=`$dir/shar --print-text-domain-dir` + fi +done +IFS="$save_IFS" +if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED +then + echo=echo +else + TEXTDOMAINDIR=$locale_dir + export TEXTDOMAINDIR + TEXTDOMAIN=sharutils + export TEXTDOMAIN + echo="$gettext_dir/gettext -s" +fi +if touch -am -t 200112312359.59 $$.touch >/dev/null 2>&1 && test ! -f 200112312359.59 -a -f $$.touch; then + shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"' +elif touch -am 123123592001.59 $$.touch >/dev/null 2>&1 && test ! -f 123123592001.59 -a ! -f 123123592001.5 -a -f $$.touch; then + shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"' +elif touch -am 1231235901 $$.touch >/dev/null 2>&1 && test ! -f 1231235901 -a -f $$.touch; then + shar_touch='touch -am $3$4$5$6$2 "$8"' +else + shar_touch=: + echo + $echo 'WARNING: not restoring timestamps. Consider getting and' + $echo "installing GNU \`touch', distributed in GNU File Utilities..." + echo +fi +rm -f 200112312359.59 123123592001.59 123123592001.5 1231235901 $$.touch +# +if mkdir _sh17581; then + $echo 'x -' 'creating lock directory' +else + $echo 'failed to create lock directory' + exit 1 +fi +# ============= ip2mkdev ============== +if test -f 'ip2mkdev' && test "$first_param" != -c; then + $echo 'x -' SKIPPING 'ip2mkdev' '(file already exists)' +else + $echo 'x -' extracting 'ip2mkdev' '(text)' + sed 's/^X//' << 'SHAR_EOF' > 'ip2mkdev' && +#!/bin/sh - +# +# ip2mkdev +# +# Make or remove devices as needed for Computone Intelliport drivers +# +# First rule! If the dev file exists and you need it, don't mess +# with it. That prevents us from screwing up open ttys, ownership +# and permissions on a running system! +# +# This script will NOT remove devices that no longer exist if their +# board or interface box has been removed. If you want to get rid +# of them, you can manually do an "rm -f /dev/ttyF* /dev/cuaf*" +# before running this script. Running this script will then recreate +# all the valid devices. +# +# Michael H. Warfield +# /\/\|=mhw=|\/\/ +# mhw@wittsend.com +# +# Updated 10/29/2000 for version 1.2.13 naming convention +# under devfs. /\/\|=mhw=|\/\/ +# +# Updated 03/09/2000 for devfs support in ip2 drivers. /\/\|=mhw=|\/\/ +# +X +if test -d /dev/ip2 ; then +# This is devfs mode... We don't do anything except create symlinks +# from the real devices to the old names! +X cd /dev +X echo "Creating symbolic links to devfs devices" +X for i in `ls ip2` ; do +X if test ! -L ip2$i ; then +X # Remove it incase it wasn't a symlink (old device) +X rm -f ip2$i +X ln -s ip2/$i ip2$i +X fi +X done +X for i in `( cd tts ; ls F* )` ; do +X if test ! -L tty$i ; then +X # Remove it incase it wasn't a symlink (old device) +X rm -f tty$i +X ln -s tts/$i tty$i +X fi +X done +X for i in `( cd cua ; ls F* )` ; do +X DEVNUMBER=`expr $i : 'F\(.*\)'` +X if test ! -L cuf$DEVNUMBER ; then +X # Remove it incase it wasn't a symlink (old device) +X rm -f cuf$DEVNUMBER +X ln -s cua/$i cuf$DEVNUMBER +X fi +X done +X exit 0 +fi +X +if test ! -f /proc/tty/drivers +then +X echo "\ +Unable to check driver status. +Make sure proc file system is mounted." +X +X exit 255 +fi +X +if test ! -f /proc/tty/driver/ip2 +then +X echo "\ +Unable to locate ip2 proc file. +Attempting to load driver" +X +X if /sbin/insmod ip2 +X then +X if test ! -f /proc/tty/driver/ip2 +X then +X echo "\ +Unable to locate ip2 proc file after loading driver. +Driver initialization failure or driver version error. +" +X exit 255 +X fi +X else +X echo "Unable to load ip2 driver." +X exit 255 +X fi +fi +X +# Ok... So we got the driver loaded and we can locate the procfs files. +# Next we need our major numbers. +X +TTYMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/tt/!d' -e 's/.*tt[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` +CUAMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/cu/!d' -e 's/.*cu[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` +BRDMAJOR=`sed -e '/^Driver: /!d' -e 's/.*IMajor=\([0-9]*\)[ ]*.*/\1/' < /proc/tty/driver/ip2` +X +echo "\ +TTYMAJOR = $TTYMAJOR +CUAMAJOR = $CUAMAJOR +BRDMAJOR = $BRDMAJOR +" +X +# Ok... Now we should know our major numbers, if appropriate... +# Now we need our boards and start the device loops. +X +grep '^Board [0-9]:' /proc/tty/driver/ip2 | while read token number type alltherest +do +X # The test for blank "type" will catch the stats lead-in lines +X # if they exist in the file +X if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = "" +X then +X continue +X fi +X +X BOARDNO=`expr "$number" : '\([0-9]\):'` +X PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '` +X MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '` +X +X if test "$BOARDNO" = "" -o "$PORTS" = "" +X then +# This may be a bug. We should at least get this much information +X echo "Unable to process board line" +X continue +X fi +X +X if test "$MINORS" = "" +X then +# Silently skip this one. This board seems to have no boxes +X continue +X fi +X +X echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS" +X +X if test "$BRDMAJOR" != "" +X then +X BRDMINOR=`expr $BOARDNO \* 4` +X STSMINOR=`expr $BRDMINOR + 1` +X if test ! -c /dev/ip2ipl$BOARDNO ; then +X mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR +X fi +X if test ! -c /dev/ip2stat$BOARDNO ; then +X mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR +X fi +X fi +X +X if test "$TTYMAJOR" != "" +X then +X PORTNO=$BOARDBASE +X +X for PORTNO in $MINORS +X do +X if test ! -c /dev/ttyF$PORTNO ; then +X # We got the hardware but no device - make it +X mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO +X fi +X done +X fi +X +X if test "$CUAMAJOR" != "" +X then +X PORTNO=$BOARDBASE +X +X for PORTNO in $MINORS +X do +X if test ! -c /dev/cuf$PORTNO ; then +X # We got the hardware but no device - make it +X mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO +X fi +X done +X fi +done +X +Xexit 0 +SHAR_EOF + (set 20 01 10 29 10 32 01 'ip2mkdev'; eval "$shar_touch") && + chmod 0755 'ip2mkdev' || + $echo 'restore of' 'ip2mkdev' 'failed' + if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ + && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then + md5sum -c << SHAR_EOF >/dev/null 2>&1 \ + || $echo 'ip2mkdev:' 'MD5 check failed' +cb5717134509f38bad9fde6b1f79b4a4 ip2mkdev +SHAR_EOF + else + shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'ip2mkdev'`" + test 4251 -eq "$shar_count" || + $echo 'ip2mkdev:' 'original size' '4251,' 'current size' "$shar_count!" + fi +fi +rm -fr _sh17581 +exit 0 diff --git a/Documentation/serial/digiepca.txt b/Documentation/serial/digiepca.txt new file mode 100644 index 00000000000..f2560e22f2c --- /dev/null +++ b/Documentation/serial/digiepca.txt @@ -0,0 +1,98 @@ +NOTE: This driver is obsolete. Digi provides a 2.6 driver (dgdm) at +http://www.digi.com for PCI cards. They no longer maintain this driver, +and have no 2.6 driver for ISA cards. + +This driver requires a number of user-space tools. They can be acquired from +http://www.digi.com, but only works with 2.4 kernels. + + +The Digi Intl. epca driver. +---------------------------- +The Digi Intl. epca driver for Linux supports the following boards: + +Digi PC/Xem, PC/Xr, PC/Xe, PC/Xi, PC/Xeve +Digi EISA/Xem, PCI/Xem, PCI/Xr + +Limitations: +------------ +Currently the driver only autoprobes for supported PCI boards. + +The Linux MAKEDEV command does not support generating the Digiboard +Devices. Users executing digiConfig to setup EISA and PC series cards +will have their device nodes automatically constructed (cud?? for ~CLOCAL, +and ttyD?? for CLOCAL). Users wishing to boot their board from the LILO +prompt, or those users booting PCI cards may use buildDIGI to construct +the necessary nodes. + +Notes: +------ +This driver may be configured via LILO. For users who have already configured +their driver using digiConfig, configuring from LILO will override previous +settings. Multiple boards may be configured by issuing multiple LILO command +lines. For examples see the bottom of this document. + +Device names start at 0 and continue up. Beware of this as previous Digi +drivers started device names with 1. + +PCI boards are auto-detected and configured by the driver. PCI boards will +be allocated device numbers (internally) beginning with the lowest PCI slot +first. In other words a PCI card in slot 3 will always have higher device +nodes than a PCI card in slot 1. + +LILO config examples: +--------------------- +Using LILO's APPEND command, a string of comma separated identifiers or +integers can be used to configure supported boards. The six values in order +are: + + Enable/Disable this card or Override, + Type of card: PC/Xe (AccelePort) (0), PC/Xeve (1), PC/Xem or PC/Xr (2), + EISA/Xem (3), PC/64Xe (4), PC/Xi (5), + Enable/Disable alternate pin arrangement, + Number of ports on this card, + I/O Port where card is configured (in HEX if using string identifiers), + Base of memory window (in HEX if using string identifiers), + +NOTE : PCI boards are auto-detected and configured. Do not attempt to +configure PCI boards with the LILO append command. If you wish to override +previous configuration data (As set by digiConfig), but you do not wish to +configure any specific card (Example if there are PCI cards in the system) +the following override command will accomplish this: +-> append="digi=2" + +Samples: + append="digiepca=E,PC/Xe,D,16,200,D0000" + or + append="digi=1,0,0,16,512,851968" + +Supporting Tools: +----------------- +Supporting tools include digiDload, digiConfig, buildPCI, and ditty. See +drivers/char/README.epca for more details. Note, +this driver REQUIRES that digiDload be executed prior to it being used. +Failure to do this will result in an ENODEV error. + +Documentation: +-------------- +Complete documentation for this product may be found in the tool package. + +Sources of information and support: +----------------------------------- +Digi Intl. support site for this product: + +-> http://www.digi.com + +Acknowledgments: +---------------- +Much of this work (And even text) was derived from a similar document +supporting the original public domain DigiBoard driver Copyright (C) +1994,1995 Troy De Jongh. Many thanks to Christoph Lameter +(christoph@lameter.com) and Mike McLagan (mike.mclagan@linux.org) who authored +and contributed to the original document. + +Changelog: +---------- +10-29-04: Update status of driver, remove dead links in document + James Nelson + +2000 (?) Original Document diff --git a/Documentation/serial/hayes-esp.txt b/Documentation/serial/hayes-esp.txt new file mode 100644 index 00000000000..09b5d585675 --- /dev/null +++ b/Documentation/serial/hayes-esp.txt @@ -0,0 +1,154 @@ +HAYES ESP DRIVER VERSION 2.1 + +A big thanks to the people at Hayes, especially Alan Adamson. Their support +has enabled me to provide enhancements to the driver. + +Please report your experiences with this driver to me (arobinso@nyx.net). I +am looking for both positive and negative feedback. + +*** IMPORTANT CHANGES FOR 2.1 *** +Support for PIO mode. Five situations will cause PIO mode to be used: +1) A multiport card is detected. PIO mode will always be used. (8 port cards +do not support DMA). +2) The DMA channel is set to an invalid value (anything other than 1 or 3). +3) The DMA buffer/channel could not be allocated. The port will revert to PIO +mode until it is reopened. +4) Less than a specified number of bytes need to be transferred to/from the +FIFOs. PIO mode will be used for that transfer only. +5) A port needs to do a DMA transfer and another port is already using the +DMA channel. PIO mode will be used for that transfer only. + +Since the Hayes ESP seems to conflict with other cards (notably sound cards) +when using DMA, DMA is turned off by default. To use DMA, it must be turned +on explicitly, either with the "dma=" option described below or with +setserial. A multiport card can be forced into DMA mode by using setserial; +however, most multiport cards don't support DMA. + +The latest version of setserial allows the enhanced configuration of the ESP +card to be viewed and modified. +*** + +This package contains the files needed to compile a module to support the Hayes +ESP card. The drivers are basically a modified version of the serial drivers. + +Features: + +- Uses the enhanced mode of the ESP card, allowing a wider range of + interrupts and features than compatibility mode +- Uses DMA and 16 bit PIO mode to transfer data to and from the ESP's FIFOs, + reducing CPU load +- Supports primary and secondary ports + + +If the driver is compiled as a module, the IRQs to use can be specified by +using the irq= option. The format is: + +irq=[0x100],[0x140],[0x180],[0x200],[0x240],[0x280],[0x300],[0x380] + +The address in brackets is the base address of the card. The IRQ of +nonexistent cards can be set to 0. If an IRQ of a card that does exist is set +to 0, the driver will attempt to guess at the correct IRQ. For example, to set +the IRQ of the card at address 0x300 to 12, the insmod command would be: + +insmod esp irq=0,0,0,0,0,0,12,0 + +The custom divisor can be set by using the divisor= option. The format is the +same as for the irq= option. Each divisor value is a series of hex digits, +with each digit representing the divisor to use for a corresponding port. The +divisor value is constructed RIGHT TO LEFT. Specifying a nonzero divisor value +will automatically set the spd_cust flag. To calculate the divisor to use for +a certain baud rate, divide the port's base baud (generally 921600) by the +desired rate. For example, to set the divisor of the primary port at 0x300 to +4 and the divisor of the secondary port at 0x308 to 8, the insmod command would +be: + +insmod esp divisor=0,0,0,0,0,0,0x84,0 + +The dma= option can be used to set the DMA channel. The channel can be either +1 or 3. Specifying any other value will force the driver to use PIO mode. +For example, to set the DMA channel to 3, the insmod command would be: + +insmod esp dma=3 + +The rx_trigger= and tx_trigger= options can be used to set the FIFO trigger +levels. They specify when the ESP card should send an interrupt. Larger +values will decrease the number of interrupts; however, a value too high may +result in data loss. Valid values are 1 through 1023, with 768 being the +default. For example, to set the receive trigger level to 512 bytes and the +transmit trigger level to 700 bytes, the insmod command would be: + +insmod esp rx_trigger=512 tx_trigger=700 + +The flow_off= and flow_on= options can be used to set the hardware flow off/ +flow on levels. The flow on level must be lower than the flow off level, and +the flow off level should be higher than rx_trigger. Valid values are 1 +through 1023, with 1016 being the default flow off level and 944 being the +default flow on level. For example, to set the flow off level to 1000 bytes +and the flow on level to 935 bytes, the insmod command would be: + +insmod esp flow_off=1000 flow_on=935 + +The rx_timeout= option can be used to set the receive timeout value. This +value indicates how long after receiving the last character that the ESP card +should wait before signalling an interrupt. Valid values are 0 though 255, +with 128 being the default. A value too high will increase latency, and a +value too low will cause unnecessary interrupts. For example, to set the +receive timeout to 255, the insmod command would be: + +insmod esp rx_timeout=255 + +The pio_threshold= option sets the threshold (in number of characters) for +using PIO mode instead of DMA mode. For example, if this value is 32, +transfers of 32 bytes or less will always use PIO mode. + +insmod esp pio_threshold=32 + +Multiple options can be listed on the insmod command line by separating each +option with a space. For example: + +insmod esp dma=3 trigger=512 + +The esp module can be automatically loaded when needed. To cause this to +happen, add the following lines to /etc/modprobe.conf (replacing the last line +with options for your configuration): + +alias char-major-57 esp +alias char-major-58 esp +options esp irq=0,0,0,0,0,0,3,0 divisor=0,0,0,0,0,0,0x4,0 + +You may also need to run 'depmod -a'. + +Devices must be created manually. To create the devices, note the output from +the module after it is inserted. The output will appear in the location where +kernel messages usually appear (usually /var/adm/messages). Create two devices +for each 'tty' mentioned, one with major of 57 and the other with major of 58. +The minor number should be the same as the tty number reported. The commands +would be (replace ? with the tty number): + +mknod /dev/ttyP? c 57 ? +mknod /dev/cup? c 58 ? + +For example, if the following line appears: + +Oct 24 18:17:23 techno kernel: ttyP8 at 0x0140 (irq = 3) is an ESP primary port + +...two devices should be created: + +mknod /dev/ttyP8 c 57 8 +mknod /dev/cup8 c 58 8 + +You may need to set the permissions on the devices: + +chmod 666 /dev/ttyP* +chmod 666 /dev/cup* + +The ESP module and the serial module should not conflict (they can be used at +the same time). After the ESP module has been loaded the ports on the ESP card +will no longer be accessible by the serial driver. + +If I/O errors are experienced when accessing the port, check for IRQ and DMA +conflicts ('cat /proc/interrupts' and 'cat /proc/dma' for a list of IRQs and +DMAs currently in use). + +Enjoy! +Andrew J. Robinson diff --git a/Documentation/serial/moxa-smartio b/Documentation/serial/moxa-smartio new file mode 100644 index 00000000000..5337e80a5b9 --- /dev/null +++ b/Documentation/serial/moxa-smartio @@ -0,0 +1,523 @@ +============================================================================= + MOXA Smartio/Industio Family Device Driver Installation Guide + for Linux Kernel 2.4.x, 2.6.x + Copyright (C) 2008, Moxa Inc. +============================================================================= +Date: 01/21/2008 + +Content + +1. Introduction +2. System Requirement +3. Installation + 3.1 Hardware installation + 3.2 Driver files + 3.3 Device naming convention + 3.4 Module driver configuration + 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x. + 3.6 Custom configuration + 3.7 Verify driver installation +4. Utilities +5. Setserial +6. Troubleshooting + +----------------------------------------------------------------------------- +1. Introduction + + The Smartio/Industio/UPCI family Linux driver supports following multiport + boards. + + - 2 ports multiport board + CP-102U, CP-102UL, CP-102UF + CP-132U-I, CP-132UL, + CP-132, CP-132I, CP132S, CP-132IS, + CI-132, CI-132I, CI-132IS, + (C102H, C102HI, C102HIS, C102P, CP-102, CP-102S) + + - 4 ports multiport board + CP-104EL, + CP-104UL, CP-104JU, + CP-134U, CP-134U-I, + C104H/PCI, C104HS/PCI, + CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL, + C104H, C104HS, + CI-104J, CI-104JS, + CI-134, CI-134I, CI-134IS, + (C114HI, CT-114I, C104P) + POS-104UL, + CB-114, + CB-134I + + - 8 ports multiport board + CP-118EL, CP-168EL, + CP-118U, CP-168U, + C168H/PCI, + C168H, C168HS, + (C168P), + CB-108 + + This driver and installation procedure have been developed upon Linux Kernel + 2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order + to maintain compatibility, this version has also been properly tested with + RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem + occurs, please contact Moxa at support@moxa.com.tw. + + In addition to device driver, useful utilities are also provided in this + version. They are + - msdiag Diagnostic program for displaying installed Moxa + Smartio/Industio boards. + - msmon Monitor program to observe data count and line status signals. + - msterm A simple terminal program which is useful in testing serial + ports. + - io-irq.exe Configuration program to setup ISA boards. Please note that + this program can only be executed under DOS. + + All the drivers and utilities are published in form of source code under + GNU General Public License in this version. Please refer to GNU General + Public License announcement in each source code file for more detail. + + In Moxa's Web sites, you may always find latest driver at http://web.moxa.com. + + This version of driver can be installed as Loadable Module (Module driver) + or built-in into kernel (Static driver). You may refer to following + installation procedure for suitable one. Before you install the driver, + please refer to hardware installation procedure in the User's Manual. + + We assume the user should be familiar with following documents. + - Serial-HOWTO + - Kernel-HOWTO + +----------------------------------------------------------------------------- +2. System Requirement + - Hardware platform: Intel x86 machine + - Kernel version: 2.4.x or 2.6.x + - gcc version 2.72 or later + - Maximum 4 boards can be installed in combination + +----------------------------------------------------------------------------- +3. Installation + + 3.1 Hardware installation + 3.2 Driver files + 3.3 Device naming convention + 3.4 Module driver configuration + 3.5 Static driver configuration for Linux kernel 2.4.x, 2.6.x. + 3.6 Custom configuration + 3.7 Verify driver installation + + + 3.1 Hardware installation + + There are two types of buses, ISA and PCI, for Smartio/Industio + family multiport board. + + ISA board + --------- + You'll have to configure CAP address, I/O address, Interrupt Vector + as well as IRQ before installing this driver. Please refer to hardware + installation procedure in User's Manual before proceed any further. + Please make sure the JP1 is open after the ISA board is set properly. + + PCI/UPCI board + -------------- + You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict + with other ISA devices. Please refer to hardware installation + procedure in User's Manual in advance. + + PCI IRQ Sharing + ----------- + Each port within the same multiport board shares the same IRQ. Up to + 4 Moxa Smartio/Industio PCI Family multiport boards can be installed + together on one system and they can share the same IRQ. + + + 3.2 Driver files + + The driver file may be obtained from ftp, CD-ROM or floppy disk. The + first step, anyway, is to copy driver file "mxser.tgz" into specified + directory. e.g. /moxa. The execute commands as below. + + # cd / + # mkdir moxa + # cd /moxa + # tar xvf /dev/fd0 + + or + + # cd / + # mkdir moxa + # cd /moxa + # cp /mnt/cdrom//mxser.tgz . + # tar xvfz mxser.tgz + + + 3.3 Device naming convention + + You may find all the driver and utilities files in /moxa/mxser. + Following installation procedure depends on the model you'd like to + run the driver. If you prefer module driver, please refer to 3.4. + If static driver is required, please refer to 3.5. + + Dialin and callout port + ----------------------- + This driver remains traditional serial device properties. There are + two special file name for each serial port. One is dial-in port + which is named "ttyMxx". For callout port, the naming convention + is "cumxx". + + Device naming when more than 2 boards installed + ----------------------------------------------- + Naming convention for each Smartio/Industio multiport board is + pre-defined as below. + + Board Num. Dial-in Port Callout port + 1st board ttyM0 - ttyM7 cum0 - cum7 + 2nd board ttyM8 - ttyM15 cum8 - cum15 + 3rd board ttyM16 - ttyM23 cum16 - cum23 + 4th board ttyM24 - ttym31 cum24 - cum31 + + + !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + Under Kernel 2.6 the cum Device is Obsolete. So use ttyM* + device instead. + !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + + Board sequence + -------------- + This driver will activate ISA boards according to the parameter set + in the driver. After all specified ISA board activated, PCI board + will be installed in the system automatically driven. + Therefore the board number is sorted by the CAP address of ISA boards. + For PCI boards, their sequence will be after ISA boards and C168H/PCI + has higher priority than C104H/PCI boards. + + 3.4 Module driver configuration + Module driver is easiest way to install. If you prefer static driver + installation, please skip this paragraph. + + + ------------- Prepare to use the MOXA driver-------------------- + 3.4.1 Create tty device with correct major number + Before using MOXA driver, your system must have the tty devices + which are created with driver's major number. We offer one shell + script "msmknod" to simplify the procedure. + This step is only needed to be executed once. But you still + need to do this procedure when: + a. You change the driver's major number. Please refer the "3.7" + section. + b. Your total installed MOXA boards number is changed. Maybe you + add/delete one MOXA board. + c. You want to change the tty name. This needs to modify the + shell script "msmknod" + + The procedure is: + # cd /moxa/mxser/driver + # ./msmknod + + This shell script will require the major number for dial-in + device and callout device to create tty device. You also need + to specify the total installed MOXA board number. Default major + numbers for dial-in device and callout device are 30, 35. If + you need to change to other number, please refer section "3.7" + for more detailed procedure. + Msmknod will delete any special files occupying the same device + naming. + + 3.4.2 Build the MOXA driver and utilities + Before using the MOXA driver and utilities, you need compile the + all the source code. This step is only need to be executed once. + But you still re-compile the source code if you modify the source + code. For example, if you change the driver's major number (see + "3.7" section), then you need to do this step again. + + Find "Makefile" in /moxa/mxser, then run + + # make clean; make install + + !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! + For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1: + # make clean; make installsp1 + + For Red Hat Enterprise Linux AS4/ES4/WS4: + # make clean; make installsp2 + !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! + + The driver files "mxser.o" and utilities will be properly compiled + and copied to system directories respectively. + + ------------- Load MOXA driver-------------------- + 3.4.3 Load the MOXA driver + + # modprobe mxser + + will activate the module driver. You may run "lsmod" to check + if "mxser" is activated. If the MOXA board is ISA board, the + is needed. Please refer to section "3.4.5" for more + information. + + + ------------- Load MOXA driver on boot -------------------- + 3.4.4 For the above description, you may manually execute + "modprobe mxser" to activate this driver and run + "rmmod mxser" to remove it. + However, it's better to have a boot time configuration to + eliminate manual operation. Boot time configuration can be + achieved by rc file. We offer one "rc.mxser" file to simplify + the procedure under "moxa/mxser/driver". + + But if you use ISA board, please modify the "modprobe ..." command + to add the argument (see "3.4.5" section). After modifying the + rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser" + manually to make sure the modification is ok. If any error + encountered, please try to modify again. If the modification is + completed, follow the below step. + + Run following command for setting rc files. + + # cd /moxa/mxser/driver + # cp ./rc.mxser /etc/rc.d + # cd /etc/rc.d + + Check "rc.serial" is existed or not. If "rc.serial" doesn't exist, + create it by vi, run "chmod 755 rc.serial" to change the permission. + Add "/etc/rc.d/rc.mxser" in last line, + + Reboot and check if moxa.o activated by "lsmod" command. + + 3.4.5. If you'd like to drive Smartio/Industio ISA boards in the system, + you'll have to add parameter to specify CAP address of given + board while activating "mxser.o". The format for parameters are + as follows. + + modprobe mxser ioaddr=0x???,0x???,0x???,0x??? + | | | | + | | | +- 4th ISA board + | | +------ 3rd ISA board + | +------------ 2nd ISA board + +------------------- 1st ISA board + + 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x + + Note: To use static driver, you must install the linux kernel + source package. + + 3.5.1 Backup the built-in driver in the kernel. + # cd /usr/src/linux/drivers/char + # mv mxser.c mxser.c.old + + For Red Hat 7.x user, you need to create link: + # cd /usr/src + # ln -s linux-2.4 linux + + 3.5.2 Create link + # cd /usr/src/linux/drivers/char + # ln -s /moxa/mxser/driver/mxser.c mxser.c + + 3.5.3 Add CAP address list for ISA boards. For PCI boards user, + please skip this step. + + In module mode, the CAP address for ISA board is given by + parameter. In static driver configuration, you'll have to + assign it within driver's source code. If you will not + install any ISA boards, you may skip to next portion. + The instructions to modify driver source code are as + below. + a. # cd /moxa/mxser/driver + # vi mxser.c + b. Find the array mxserBoardCAP[] as below. + + static int mxserBoardCAP[] + = {0x00, 0x00, 0x00, 0x00}; + + c. Change the address within this array using vi. For + example, to driver 2 ISA boards with CAP address + 0x280 and 0x180 as 1st and 2nd board. Just to change + the source code as follows. + + static int mxserBoardCAP[] + = {0x280, 0x180, 0x00, 0x00}; + + 3.5.4 Setup kernel configuration + + Configure the kernel: + + # cd /usr/src/linux + # make menuconfig + + You will go into a menu-driven system. Please select [Character + devices][Non-standard serial port support], enable the [Moxa + SmartIO support] driver with "[*]" for built-in (not "[M]"), then + select [Exit] to exit this program. + + 3.5.5 Rebuild kernel + The following are for Linux kernel rebuilding, for your + reference only. + For appropriate details, please refer to the Linux document. + + a. cd /usr/src/linux + b. make clean /* take a few minutes */ + c. make dep /* take a few minutes */ + d. make bzImage /* take probably 10-20 minutes */ + e. make install /* copy boot image to correct position */ + f. Please make sure the boot kernel (vmlinuz) is in the + correct position. + g. If you use 'lilo' utility, you should check /etc/lilo.conf + 'image' item specified the path which is the 'vmlinuz' path, + or you will load wrong (or old) boot kernel image (vmlinuz). + After checking /etc/lilo.conf, please run "lilo". + + Note that if the result of "make bzImage" is ERROR, then you have to + go back to Linux configuration Setup. Type "make menuconfig" in + directory /usr/src/linux. + + + 3.5.6 Make tty device and special file + # cd /moxa/mxser/driver + # ./msmknod + + 3.5.7 Make utility + # cd /moxa/mxser/utility + # make clean; make install + + 3.5.8 Reboot + + + + 3.6 Custom configuration + Although this driver already provides you default configuration, you + still can change the device name and major number. The instruction to + change these parameters are shown as below. + + Change Device name + ------------------ + If you'd like to use other device names instead of default naming + convention, all you have to do is to modify the internal code + within the shell script "msmknod". First, you have to open "msmknod" + by vi. Locate each line contains "ttyM" and "cum" and change them + to the device name you desired. "msmknod" creates the device names + you need next time executed. + + Change Major number + ------------------- + If major number 30 and 35 had been occupied, you may have to select + 2 free major numbers for this driver. There are 3 steps to change + major numbers. + + 3.6.1 Find free major numbers + In /proc/devices, you may find all the major numbers occupied + in the system. Please select 2 major numbers that are available. + e.g. 40, 45. + 3.6.2 Create special files + Run /moxa/mxser/driver/msmknod to create special files with + specified major numbers. + 3.6.3 Modify driver with new major number + Run vi to open /moxa/mxser/driver/mxser.c. Locate the line + contains "MXSERMAJOR". Change the content as below. + #define MXSERMAJOR 40 + #define MXSERCUMAJOR 45 + 3.6.4 Run "make clean; make install" in /moxa/mxser/driver. + + 3.7 Verify driver installation + You may refer to /var/log/messages to check the latest status + log reported by this driver whenever it's activated. + +----------------------------------------------------------------------------- +4. Utilities + There are 3 utilities contained in this driver. They are msdiag, msmon and + msterm. These 3 utilities are released in form of source code. They should + be compiled into executable file and copied into /usr/bin. + + Before using these utilities, please load driver (refer 3.4 & 3.5) and + make sure you had run the "msmknod" utility. + + msdiag - Diagnostic + -------------------- + This utility provides the function to display what Moxa Smartio/Industio + board found by driver in the system. + + msmon - Port Monitoring + ----------------------- + This utility gives the user a quick view about all the MOXA ports' + activities. One can easily learn each port's total received/transmitted + (Rx/Tx) character count since the time when the monitoring is started. + Rx/Tx throughputs per second are also reported in interval basis (e.g. + the last 5 seconds) and in average basis (since the time the monitoring + is started). You can reset all ports' count by key. <+> <-> + (plus/minus) keys to change the displaying time interval. Press + on the port, that cursor stay, to view the port's communication + parameters, signal status, and input/output queue. + + msterm - Terminal Emulation + --------------------------- + This utility provides data sending and receiving ability of all tty ports, + especially for MOXA ports. It is quite useful for testing simple + application, for example, sending AT command to a modem connected to the + port or used as a terminal for login purpose. Note that this is only a + dumb terminal emulation without handling full screen operation. + +----------------------------------------------------------------------------- +5. Setserial + + Supported Setserial parameters are listed as below. + + uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO) + close_delay set the amount of time(in 1/100 of a second) that DTR + should be kept low while being closed. + closing_wait set the amount of time(in 1/100 of a second) that the + serial port should wait for data to be drained while + being closed, before the receiver is disable. + spd_hi Use 57.6kb when the application requests 38.4kb. + spd_vhi Use 115.2kb when the application requests 38.4kb. + spd_shi Use 230.4kb when the application requests 38.4kb. + spd_warp Use 460.8kb when the application requests 38.4kb. + spd_normal Use 38.4kb when the application requests 38.4kb. + spd_cust Use the custom divisor to set the speed when the + application requests 38.4kb. + divisor This option set the custom divison. + baud_base This option set the base baud rate. + +----------------------------------------------------------------------------- +6. Troubleshooting + + The boot time error messages and solutions are stated as clearly as + possible. If all the possible solutions fail, please contact our technical + support team to get more help. + + + Error msg: More than 4 Moxa Smartio/Industio family boards found. Fifth board + and after are ignored. + Solution: + To avoid this problem, please unplug fifth and after board, because Moxa + driver supports up to 4 boards. + + Error msg: Request_irq fail, IRQ(?) may be conflict with another device. + Solution: + Other PCI or ISA devices occupy the assigned IRQ. If you are not sure + which device causes the situation, please check /proc/interrupts to find + free IRQ and simply change another free IRQ for Moxa board. + + Error msg: Board #: C1xx Series(CAP=xxx) interrupt number invalid. + Solution: + Each port within the same multiport board shares the same IRQ. Please set + one IRQ (IRQ doesn't equal to zero) for one Moxa board. + + Error msg: No interrupt vector be set for Moxa ISA board(CAP=xxx). + Solution: + Moxa ISA board needs an interrupt vector.Please refer to user's manual + "Hardware Installation" chapter to set interrupt vector. + + Error msg: Couldn't install MOXA Smartio/Industio family driver! + Solution: + Load Moxa driver fail, the major number may conflict with other devices. + Please refer to previous section 3.7 to change a free major number for + Moxa driver. + + Error msg: Couldn't install MOXA Smartio/Industio family callout driver! + Solution: + Load Moxa callout driver fail, the callout device major number may + conflict with other devices. Please refer to previous section 3.7 to + change a free callout device major number for Moxa driver. + + +----------------------------------------------------------------------------- + diff --git a/Documentation/serial/riscom8.txt b/Documentation/serial/riscom8.txt new file mode 100644 index 00000000000..14f61fdad7c --- /dev/null +++ b/Documentation/serial/riscom8.txt @@ -0,0 +1,36 @@ +* NOTE - this is an unmaintained driver. The original author cannot be located. + +SDL Communications is now SBS Technologies, and does not have any +information on these ancient ISA cards on their website. + +James Nelson - 12-12-2004 + + This is the README for RISCom/8 multi-port serial driver + (C) 1994-1996 D.Gorodchanin + See file LICENSE for terms and conditions. + +NOTE: English is not my native language. + I'm sorry for any mistakes in this text. + +Misc. notes for RISCom/8 serial driver, in no particular order :) + +1) This driver can support up to 4 boards at time. + Use string "riscom8=0xXXX,0xXXX,0xXXX,0xXXX" at LILO prompt, for + setting I/O base addresses for boards. If you compile driver + as module use modprobe options "iobase=0xXXX iobase1=0xXXX iobase2=..." + +2) The driver partially supports famous 'setserial' program, you can use almost + any of its options, excluding port & irq settings. + +3) There are some misc. defines at the beginning of riscom8.c, please read the + comments and try to change some of them in case of problems. + +4) I consider the current state of the driver as BETA. + +5) SDL Communications WWW page is http://www.sdlcomm.com. + +6) You can use the MAKEDEV program to create RISCom/8 /dev/ttyL* entries. + +7) Minor numbers for first board are 0-7, for second 8-15, etc. + +22 Apr 1996. diff --git a/Documentation/serial/rocket.txt b/Documentation/serial/rocket.txt new file mode 100644 index 00000000000..1d858299043 --- /dev/null +++ b/Documentation/serial/rocket.txt @@ -0,0 +1,189 @@ +Comtrol(tm) RocketPort(R)/RocketModem(TM) Series +Device Driver for the Linux Operating System + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + +PRODUCT OVERVIEW +---------------- + +This driver provides a loadable kernel driver for the Comtrol RocketPort +and RocketModem PCI boards. These boards provide, 2, 4, 8, 16, or 32 +high-speed serial ports or modems. This driver supports up to a combination +of four RocketPort or RocketModems boards in one machine simultaneously. +This file assumes that you are using the RocketPort driver which is +integrated into the kernel sources. + +The driver can also be installed as an external module using the usual +"make;make install" routine. This external module driver, obtainable +from the Comtrol website listed below, is useful for updating the driver +or installing it into kernels which do not have the driver configured +into them. Installations instructions for the external module +are in the included README and HW_INSTALL files. + +RocketPort ISA and RocketModem II PCI boards currently are only supported by +this driver in module form. + +The RocketPort ISA board requires I/O ports to be configured by the DIP +switches on the board. See the section "ISA Rocketport Boards" below for +information on how to set the DIP switches. + +You pass the I/O port to the driver using the following module parameters: + +board1 : I/O port for the first ISA board +board2 : I/O port for the second ISA board +board3 : I/O port for the third ISA board +board4 : I/O port for the fourth ISA board + +There is a set of utilities and scripts provided with the external driver +( downloadable from http://www.comtrol.com ) that ease the configuration and +setup of the ISA cards. + +The RocketModem II PCI boards require firmware to be loaded into the card +before it will function. The driver has only been tested as a module for this +board. + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + +INSTALLATION PROCEDURES +----------------------- + +RocketPort/RocketModem PCI cards require no driver configuration, they are +automatically detected and configured. + +The RocketPort driver can be installed as a module (recommended) or built +into the kernel. This is selected, as for other drivers, through the `make config` +command from the root of the Linux source tree during the kernel build process. + +The RocketPort/RocketModem serial ports installed by this driver are assigned +device major number 46, and will be named /dev/ttyRx, where x is the port number +starting at zero (ex. /dev/ttyR0, /devttyR1, ...). If you have multiple cards +installed in the system, the mapping of port names to serial ports is displayed +in the system log at /var/log/messages. + +If installed as a module, the module must be loaded. This can be done +manually by entering "modprobe rocket". To have the module loaded automatically +upon system boot, edit the /etc/modprobe.conf file and add the line +"alias char-major-46 rocket". + +In order to use the ports, their device names (nodes) must be created with mknod. +This is only required once, the system will retain the names once created. To +create the RocketPort/RocketModem device names, use the command +"mknod /dev/ttyRx c 46 x" where x is the port number starting at zero. For example: + +>mknod /dev/ttyR0 c 46 0 +>mknod /dev/ttyR1 c 46 1 +>mknod /dev/ttyR2 c 46 2 + +The Linux script MAKEDEV will create the first 16 ttyRx device names (nodes) +for you: + +>/dev/MAKEDEV ttyR + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + +ISA Rocketport Boards +--------------------- + +You must assign and configure the I/O addresses used by the ISA Rocketport +card before installing and using it. This is done by setting a set of DIP +switches on the Rocketport board. + + +SETTING THE I/O ADDRESS +----------------------- + +Before installing RocketPort(R) or RocketPort RA boards, you must find +a range of I/O addresses for it to use. The first RocketPort card +requires a 68-byte contiguous block of I/O addresses, starting at one +of the following: 0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h, +0x300h, 0x340h, 0x380h. This I/O address must be reflected in the DIP +switches of *all* of the Rocketport cards. + +The second, third, and fourth RocketPort cards require a 64-byte +contiguous block of I/O addresses, starting at one of the following +I/O addresses: 0x100h, 0x140h, 0x180h, 0x1C0h, 0x200h, 0x240h, 0x280h, +0x2C0h, 0x300h, 0x340h, 0x380h, 0x3C0h. The I/O address used by the +second, third, and fourth Rocketport cards (if present) are set via +software control. The DIP switch settings for the I/O address must be +set to the value of the first Rocketport cards. + +In order to distinguish each of the card from the others, each card +must have a unique board ID set on the dip switches. The first +Rocketport board must be set with the DIP switches corresponding to +the first board, the second board must be set with the DIP switches +corresponding to the second board, etc. IMPORTANT: The board ID is +the only place where the DIP switch settings should differ between the +various Rocketport boards in a system. + +The I/O address range used by any of the RocketPort cards must not +conflict with any other cards in the system, including other +RocketPort cards. Below, you will find a list of commonly used I/O +address ranges which may be in use by other devices in your system. +On a Linux system, "cat /proc/ioports" will also be helpful in +identifying what I/O addresses are being used by devices on your +system. + +Remember, the FIRST RocketPort uses 68 I/O addresses. So, if you set it +for 0x100, it will occupy 0x100 to 0x143. This would mean that you +CAN NOT set the second, third or fourth board for address 0x140 since +the first 4 bytes of that range are used by the first board. You would +need to set the second, third, or fourth board to one of the next available +blocks such as 0x180. + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + +RocketPort and RocketPort RA SW1 Settings: + + +-------------------------------+ + | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | + +-------+-------+---------------+ + | Unused| Card | I/O Port Block| + +-------------------------------+ + +DIP Switches DIP Switches +7 8 6 5 +=================== =================== +On On UNUSED, MUST BE ON. On On First Card <==== Default + On Off Second Card + Off On Third Card + Off Off Fourth Card + +DIP Switches I/O Address Range +4 3 2 1 Used by the First Card +===================================== +On Off On Off 100-143 +On Off Off On 140-183 +On Off Off Off 180-1C3 <==== Default +Off On On Off 200-243 +Off On Off On 240-283 +Off On Off Off 280-2C3 +Off Off On Off 300-343 +Off Off Off On 340-383 +Off Off Off Off 380-3C3 + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + +REPORTING BUGS +-------------- + +For technical support, please provide the following +information: Driver version, kernel release, distribution of +kernel, and type of board you are using. Error messages and log +printouts port configuration details are especially helpful. + +USA + Phone: (612) 494-4100 + FAX: (612) 494-4199 + email: support@comtrol.com + +Comtrol Europe + Phone: +44 (0) 1 869 323-220 + FAX: +44 (0) 1 869 323-211 + email: support@comtrol.co.uk + +Web: http://www.comtrol.com +FTP: ftp.comtrol.com + +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- + + diff --git a/Documentation/serial/specialix.txt b/Documentation/serial/specialix.txt new file mode 100644 index 00000000000..6eb6f3a3331 --- /dev/null +++ b/Documentation/serial/specialix.txt @@ -0,0 +1,383 @@ + + specialix.txt -- specialix IO8+ multiport serial driver readme. + + + + Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) + + Specialix pays for the development and support of this driver. + Please DO contact io8-linux@specialix.co.uk if you require + support. + + This driver was developed in the BitWizard linux device + driver service. If you require a linux device driver for your + product, please contact devices@BitWizard.nl for a quote. + + This code is firmly based on the riscom/8 serial driver, + written by Dmitry Gorodchanin. The specialix IO8+ card + programming information was obtained from the CL-CD1865 Data + Book, and Specialix document number 6200059: IO8+ Hardware + Functional Specification, augmented by document number 6200088: + Merak Hardware Functional Specification. (IO8+/PCI is also + called Merak) + + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of + the License, or (at your option) any later version. + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + PURPOSE. See the GNU General Public License for more details. + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, + USA. + + +Intro +===== + + +This file contains some random information, that I like to have online +instead of in a manual that can get lost. Ever misplace your Linux +kernel sources? And the manual of one of the boards in your computer? + + +Addresses and interrupts +======================== + +Address dip switch settings: +The dip switch sets bits 2-9 of the IO address. + + 9 8 7 6 5 4 3 2 + +-----------------+ + 0 | X X X X X X X | + | | = IoBase = 0x100 + 1 | X | + +-----------------+ ------ RS232 connectors ----> + + | | | + edge connector + | | | + V V V + +Base address 0x100 caused a conflict in one of my computers once. I +haven't the foggiest why. My Specialix card is now at 0x180. My +other computer runs just fine with the Specialix card at 0x100.... +The card occupies 4 addresses, but actually only two are really used. + +The PCI version doesn't have any dip switches. The BIOS assigns +an IO address. + +The driver now still autoprobes at 0x100, 0x180, 0x250 and 0x260. If +that causes trouble for you, please report that. I'll remove +autoprobing then. + +The driver will tell the card what IRQ to use, so you don't have to +change any jumpers to change the IRQ. Just use a command line +argument (irq=xx) to the insmod program to set the interrupt. + +The BIOS assigns the IRQ on the PCI version. You have no say in what +IRQ to use in that case. + +If your specialix cards are not at the default locations, you can use +the kernel command line argument "specialix=io0,irq0,io1,irq1...". +Here "io0" is the io address for the first card, and "irq0" is the +irq line that the first card should use. And so on. + +Examples. + +You use the driver as a module and have three cards at 0x100, 0x250 +and 0x180. And some way or another you want them detected in that +order. Moreover irq 12 is taken (e.g. by your PS/2 mouse). + + insmod specialix.o iobase=0x100,0x250,0x180 irq=9,11,15 + +The same three cards, but now in the kernel would require you to +add + + specialix=0x100,9,0x250,11,0x180,15 + +to the command line. This would become + + append="specialix=0x100,9,0x250,11,0x180,15" + +in your /etc/lilo.conf file if you use lilo. + +The Specialix driver is slightly odd: It allows you to have the second +or third card detected without having a first card. This has +advantages and disadvantages. A slot that isn't filled by an ISA card, +might be filled if a PCI card is detected. Thus if you have an ISA +card at 0x250 and a PCI card, you would get: + +sx0: specialix IO8+ Board at 0x100 not found. +sx1: specialix IO8+ Board at 0x180 not found. +sx2: specialix IO8+ board detected at 0x250, IRQ 12, CD1865 Rev. B. +sx3: specialix IO8+ Board at 0x260 not found. +sx0: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B. + +This would happen if you don't give any probe hints to the driver. +If you would specify: + + specialix=0x250,11 + +you'd get the following messages: + +sx0: specialix IO8+ board detected at 0x250, IRQ 11, CD1865 Rev. B. +sx1: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B. + +ISA probing is aborted after the IO address you gave is exhausted, and +the PCI card is now detected as the second card. The ISA card is now +also forced to IRQ11.... + + +Baud rates +========== + +The rev 1.2 and below boards use a CL-CD1864. These chips can only +do 64kbit. The rev 1.3 and newer boards use a CL-CD1865. These chips +are officially capable of 115k2. + +The Specialix card uses a 25MHz crystal (in times two mode, which in +fact is a divided by two mode). This is not enough to reach the rated +115k2 on all ports at the same time. With this clock rate you can only +do 37% of this rate. This means that at 115k2 on all ports you are +going to lose characters (The chip cannot handle that many incoming +bits at this clock rate.) (Yes, you read that correctly: there is a +limit to the number of -=bits=- per second that the chip can handle.) + +If you near the "limit" you will first start to see a graceful +degradation in that the chip cannot keep the transmitter busy at all +times. However with a central clock this slow, you can also get it to +miss incoming characters. The driver will print a warning message when +you are outside the official specs. The messages usually show up in +the file /var/log/messages . + +The specialix card cannot reliably do 115k2. If you use it, you have +to do "extensive testing" (*) to verify if it actually works. + +When "mgetty" communicates with my modem at 115k2 it reports: +got: +++[0d]ATQ0V1H0[0d][0d][8a]O[cb][0d][8a] + ^^^^ ^^^^ ^^^^ + +The three characters that have the "^^^" under them have suffered a +bit error in the highest bit. In conclusion: I've tested it, and found +that it simply DOESN'T work for me. I also suspect that this is also +caused by the baud rate being just a little bit out of tune. + +I upgraded the crystal to 66Mhz on one of my Specialix cards. Works +great! Contact me for details. (Voids warranty, requires a steady hand +and more such restrictions....) + + +(*) Cirrus logic CD1864 databook, page 40. + + +Cables for the Specialix IO8+ +============================= + +The pinout of the connectors on the IO8+ is: + + pin short direction long name + name + Pin 1 DCD input Data Carrier Detect + Pin 2 RXD input Receive + Pin 3 DTR/RTS output Data Terminal Ready/Ready To Send + Pin 4 GND - Ground + Pin 5 TXD output Transmit + Pin 6 CTS input Clear To Send + + + -- 6 5 4 3 2 1 -- + | | + | | + | | + | | + +----- -----+ + |__________| + clip + + Front view of an RJ12 connector. Cable moves "into" the paper. + (the plug is ready to plug into your mouth this way...) + + + NULL cable. I don't know who is going to use these except for + testing purposes, but I tested the cards with this cable. (It + took quite a while to figure out, so I'm not going to delete + it. So there! :-) + + + This end goes This end needs + straight into the some twists in + RJ12 plug. the wiring. + IO8+ RJ12 IO8+ RJ12 + 1 DCD white - + - - 1 DCD + 2 RXD black 5 TXD + 3 DTR/RTS red 6 CTS + 4 GND green 4 GND + 5 TXD yellow 2 RXD + 6 CTS blue 3 DTR/RTS + + + Same NULL cable, but now sorted on the second column. + + 1 DCD white - + - - 1 DCD + 5 TXD yellow 2 RXD + 6 CTS blue 3 DTR/RTS + 4 GND green 4 GND + 2 RXD black 5 TXD + 3 DTR/RTS red 6 CTS + + + + This is a modem cable usable for hardware handshaking: + RJ12 DB25 DB9 + 1 DCD white 8 DCD 1 DCD + 2 RXD black 3 RXD 2 RXD + 3 DTR/RTS red 4 RTS 7 RTS + 4 GND green 7 GND 5 GND + 5 TXD yellow 2 TXD 3 TXD + 6 CTS blue 5 CTS 8 CTS + +---- 6 DSR 6 DSR + +---- 20 DTR 4 DTR + + This is a modem cable usable for software handshaking: + It allows you to reset the modem using the DTR ioctls. + I (REW) have never tested this, "but xxxxxxxxxxxxx + says that it works." If you test this, please + tell me and I'll fill in your name on the xxx's. + + RJ12 DB25 DB9 + 1 DCD white 8 DCD 1 DCD + 2 RXD black 3 RXD 2 RXD + 3 DTR/RTS red 20 DTR 4 DTR + 4 GND green 7 GND 5 GND + 5 TXD yellow 2 TXD 3 TXD + 6 CTS blue 5 CTS 8 CTS + +---- 6 DSR 6 DSR + +---- 4 RTS 7 RTS + + I bought a 6 wire flat cable. It was colored as indicated. + Check that yours is the same before you trust me on this. + + +Hardware handshaking issues. +============================ + +The driver can be told to operate in two different ways. The default +behaviour is specialix.sx_rtscts = 0 where the pin behaves as DTR when +hardware handshaking is off. It behaves as the RTS hardware +handshaking signal when hardware handshaking is selected. + +When you use this, you have to use the appropriate cable. The +cable will either be compatible with hardware handshaking or with +software handshaking. So switching on the fly is not really an +option. + +I actually prefer to use the "specialix.sx_rtscts=1" option. +This makes the DTR/RTS pin always an RTS pin, and ioctls to +change DTR are always ignored. I have a cable that is configured +for this. + + +Ports and devices +================= + +Port 0 is the one furthest from the card-edge connector. + +Devices: + +You should make the devices as follows: + +bash +cd /dev +for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 \ + 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 +do + echo -n "$i " + mknod /dev/ttyW$i c 75 $i + mknod /dev/cuw$i c 76 $i +done +echo "" + +If your system doesn't come with these devices preinstalled, bug your +linux-vendor about this. They have had ample time to get this +implemented by now. + +You cannot have more than 4 boards in one computer. The card only +supports 4 different interrupts. If you really want this, contact me +about this and I'll give you a few tips (requires soldering iron).... + +If you have enough PCI slots, you can probably use more than 4 PCI +versions of the card though.... + +The PCI version of the card cannot adhere to the mechanical part of +the PCI spec because the 8 serial connectors are simply too large. If +it doesn't fit in your computer, bring back the card. + + +------------------------------------------------------------------------ + + + Fixed bugs and restrictions: + - During initialization, interrupts are blindly turned on. + Having a shadow variable would cause an extra memory + access on every IO instruction. + - The interrupt (on the card) should be disabled when we + don't allocate the Linux end of the interrupt. This allows + a different driver/card to use it while all ports are not in + use..... (a la standard serial port) + == An extra _off variant of the sx_in and sx_out macros are + now available. They don't set the interrupt enable bit. + These are used during initialization. Normal operation uses + the old variant which enables the interrupt line. + - RTS/DTR issue needs to be implemented according to + specialix' spec. + I kind of like the "determinism" of the current + implementation. Compile time flag? + == Ok. Compile time flag! Default is how Specialix likes it. + == Now a config time flag! Gets saved in your config file. Neat! + - Can you set the IO address from the lilo command line? + If you need this, bug me about it, I'll make it. + == Hah! No bugging needed. Fixed! :-) + - Cirrus logic hasn't gotten back to me yet why the CD1865 can + and the CD1864 can't do 115k2. I suspect that this is + because the CD1864 is not rated for 33MHz operation. + Therefore the CD1864 versions of the card can't do 115k2 on + all ports just like the CD1865 versions. The driver does + not block 115k2 on CD1864 cards. + == I called the Cirrus Logic representative here in Holland. + The CD1864 databook is identical to the CD1865 databook, + except for an extra warning at the end. Similar Bit errors + have been observed in testing at 115k2 on both an 1865 and + a 1864 chip. I see no reason why I would prohibit 115k2 on + 1864 chips and not do it on 1865 chips. Actually there is + reason to prohibit it on BOTH chips. I print a warning. + If you use 115k2, you're on your own. + - A spiky CD may send spurious HUPs. Also in CLOCAL??? + -- A fix for this turned out to be counter productive. + Different fix? Current behaviour is acceptable? + -- Maybe the current implementation is correct. If anybody + gets bitten by this, please report, and it will get fixed. + + -- Testing revealed that when in CLOCAL, the problem doesn't + occur. As warned for in the CD1865 manual, the chip may + send modem intr's on a spike. We could filter those out, + but that would be a cludge anyway (You'd still risk getting + a spurious HUP when two spikes occur.)..... + + + + Bugs & restrictions: + - This is a difficult card to autoprobe. + You have to WRITE to the address register to even + read-probe a CD186x register. Disable autodetection? + -- Specialix: any suggestions? + + diff --git a/Documentation/serial/stallion.txt b/Documentation/serial/stallion.txt new file mode 100644 index 00000000000..5c4902d9a5b --- /dev/null +++ b/Documentation/serial/stallion.txt @@ -0,0 +1,392 @@ +* NOTE - This is an unmaintained driver. Lantronix, which bought Stallion +technologies, is not active in driver maintenance, and they have no information +on when or if they will have a 2.6 driver. + +James Nelson - 12-12-2004 + +Stallion Multiport Serial Driver Readme +--------------------------------------- + +Copyright (C) 1994-1999, Stallion Technologies. + +Version: 5.5.1 +Date: 28MAR99 + + + +1. INTRODUCTION + +There are two drivers that work with the different families of Stallion +multiport serial boards. One is for the Stallion smart boards - that is +EasyIO, EasyConnection 8/32 and EasyConnection 8/64-PCI, the other for +the true Stallion intelligent multiport boards - EasyConnection 8/64 +(ISA, EISA, MCA), EasyConnection/RA-PCI, ONboard and Brumby. + +If you are using any of the Stallion intelligent multiport boards (Brumby, +ONboard, EasyConnection 8/64 (ISA, EISA, MCA), EasyConnection/RA-PCI) with +Linux you will need to get the driver utility package. This contains a +firmware loader and the firmware images necessary to make the devices operate. + +The Stallion Technologies ftp site, ftp.stallion.com, will always have +the latest version of the driver utility package. + +ftp://ftp.stallion.com/drivers/ata5/Linux/ata-linux-550.tar.gz + +As of the printing of this document the latest version of the driver +utility package is 5.5.0. If a later version is now available then you +should use the latest version. + +If you are using the EasyIO, EasyConnection 8/32 or EasyConnection 8/64-PCI +boards then you don't need this package, although it does have a serial stats +display program. + +If you require DIP switch settings, EISA or MCA configuration files, or any +other information related to Stallion boards then have a look at Stallion's +web pages at http://www.stallion.com. + + + +2. INSTALLATION + +The drivers can be used as loadable modules or compiled into the kernel. +You can choose which when doing a "config" on the kernel. + +All ISA, EISA and MCA boards that you want to use need to be configured into +the driver(s). All PCI boards will be automatically detected when you load +the driver - so they do not need to be entered into the driver(s) +configuration structure. Note that kernel PCI support is required to use PCI +boards. + +There are two methods of configuring ISA, EISA and MCA boards into the drivers. +If using the driver as a loadable module then the simplest method is to pass +the driver configuration as module arguments. The other method is to modify +the driver source to add configuration lines for each board in use. + +If you have pre-built Stallion driver modules then the module argument +configuration method should be used. A lot of Linux distributions come with +pre-built driver modules in /lib/modules/X.Y.Z/misc for the kernel in use. +That makes things pretty simple to get going. + + +2.1 MODULE DRIVER CONFIGURATION: + +The simplest configuration for modules is to use the module load arguments +to configure any ISA, EISA or MCA boards. PCI boards are automatically +detected, so do not need any additional configuration at all. + +If using EasyIO, EasyConnection 8/32 ISA or MCA, or EasyConnection 8/63-PCI +boards then use the "stallion" driver module, Otherwise if you are using +an EasyConnection 8/64 ISA, EISA or MCA, EasyConnection/RA-PCI, ONboard, +Brumby or original Stallion board then use the "istallion" driver module. + +Typically to load up the smart board driver use: + + modprobe stallion + +This will load the EasyIO and EasyConnection 8/32 driver. It will output a +message to say that it loaded and print the driver version number. It will +also print out whether it found the configured boards or not. These messages +may not appear on the console, but typically are always logged to +/var/adm/messages or /var/log/syslog files - depending on how the klogd and +syslogd daemons are setup on your system. + +To load the intelligent board driver use: + + modprobe istallion + +It will output similar messages to the smart board driver. + +If not using an auto-detectable board type (that is a PCI board) then you +will also need to supply command line arguments to the modprobe command +when loading the driver. The general form of the configuration argument is + + board?=[,[,][,]] + +where: + + board? -- specifies the arbitrary board number of this board, + can be in the range 0 to 3. + + name -- textual name of this board. The board name is the common + board name, or any "shortened" version of that. The board + type number may also be used here. + + ioaddr -- specifies the I/O address of this board. This argument is + optional, but should generally be specified. + + addr -- optional second address argument. Some board types require + a second I/O address, some require a memory address. The + exact meaning of this argument depends on the board type. + + irq -- optional IRQ line used by this board. + +Up to 4 board configuration arguments can be specified on the load line. +Here is some examples: + + modprobe stallion board0=easyio,0x2a0,5 + +This configures an EasyIO board as board 0 at I/O address 0x2a0 and IRQ 5. + + modprobe istallion board3=ec8/64,0x2c0,0xcc000 + +This configures an EasyConnection 8/64 ISA as board 3 at I/O address 0x2c0 at +memory address 0xcc000. + + modprobe stallion board1=ec8/32-at,0x2a0,0x280,10 + +This configures an EasyConnection 8/32 ISA board at primary I/O address 0x2a0, +secondary address 0x280 and IRQ 10. + +You will probably want to enter this module load and configuration information +into your system startup scripts so that the drivers are loaded and configured +on each system boot. Typically the start up script would be something like +/etc/modprobe.conf. + + +2.2 STATIC DRIVER CONFIGURATION: + +For static driver configuration you need to modify the driver source code. +Entering ISA, EISA and MCA boards into the driver(s) configuration structure +involves editing the driver(s) source file. It's pretty easy if you follow +the instructions below. Both drivers can support up to 4 boards. The smart +card driver (the stallion.c driver) supports any combination of EasyIO and +EasyConnection 8/32 boards (up to a total of 4). The intelligent driver +supports any combination of ONboards, Brumbys, Stallions and EasyConnection +8/64 (ISA and EISA) boards (up to a total of 4). + +To set up the driver(s) for the boards that you want to use you need to +edit the appropriate driver file and add configuration entries. + +If using EasyIO or EasyConnection 8/32 ISA or MCA boards, + In drivers/char/stallion.c: + - find the definition of the stl_brdconf array (of structures) + near the top of the file + - modify this to match the boards you are going to install + (the comments before this structure should help) + - save and exit + +If using ONboard, Brumby, Stallion or EasyConnection 8/64 (ISA or EISA) +boards, + In drivers/char/istallion.c: + - find the definition of the stli_brdconf array (of structures) + near the top of the file + - modify this to match the boards you are going to install + (the comments before this structure should help) + - save and exit + +Once you have set up the board configurations then you are ready to build +the kernel or modules. + +When the new kernel is booted, or the loadable module loaded then the +driver will emit some kernel trace messages about whether the configured +boards were detected or not. Depending on how your system logger is set +up these may come out on the console, or just be logged to +/var/adm/messages or /var/log/syslog. You should check the messages to +confirm that all is well. + + +2.3 SHARING INTERRUPTS + +It is possible to share interrupts between multiple EasyIO and +EasyConnection 8/32 boards in an EISA system. To do this you must be using +static driver configuration, modifying the driver source code to add driver +configuration. Then a couple of extra things are required: + +1. When entering the board resources into the stallion.c file you need to + mark the boards as using level triggered interrupts. Do this by replacing + the "0" entry at field position 6 (the last field) in the board + configuration structure with a "1". (This is the structure that defines + the board type, I/O locations, etc. for each board). All boards that are + sharing an interrupt must be set this way, and each board should have the + same interrupt number specified here as well. Now build the module or + kernel as you would normally. + +2. When physically installing the boards into the system you must enter + the system EISA configuration utility. You will need to install the EISA + configuration files for *all* the EasyIO and EasyConnection 8/32 boards + that are sharing interrupts. The Stallion EasyIO and EasyConnection 8/32 + EISA configuration files required are supplied by Stallion Technologies + on the EASY Utilities floppy diskette (usually supplied in the box with + the board when purchased. If not, you can pick it up from Stallion's FTP + site, ftp.stallion.com). You will need to edit the board resources to + choose level triggered interrupts, and make sure to set each board's + interrupt to the same IRQ number. + +You must complete both the above steps for this to work. When you reboot +or load the driver your EasyIO and EasyConnection 8/32 boards will be +sharing interrupts. + + +2.4 USING HIGH SHARED MEMORY + +The EasyConnection 8/64-EI, ONboard and Stallion boards are capable of +using shared memory addresses above the usual 640K - 1Mb range. The ONboard +ISA and the Stallion boards can be programmed to use memory addresses up to +16Mb (the ISA bus addressing limit), and the EasyConnection 8/64-EI and +ONboard/E can be programmed for memory addresses up to 4Gb (the EISA bus +addressing limit). + +The higher than 1Mb memory addresses are fully supported by this driver. +Just enter the address as you normally would for a lower than 1Mb address +(in the driver's board configuration structure). + + + +2.5 TROUBLE SHOOTING + +If a board is not found by the driver but is actually in the system then the +most likely problem is that the I/O address is wrong. Change the module load +argument for the loadable module form. Or change it in the driver stallion.c +or istallion.c configuration structure and rebuild the kernel or modules, or +change it on the board. + +On EasyIO and EasyConnection 8/32 boards the IRQ is software programmable, so +if there is a conflict you may need to change the IRQ used for a board. There +are no interrupts to worry about for ONboard, Brumby or EasyConnection 8/64 +(ISA, EISA and MCA) boards. The memory region on EasyConnection 8/64 and +ONboard boards is software programmable, but not on the Brumby boards. + + + +3. USING THE DRIVERS + +3.1 INTELLIGENT DRIVER OPERATION + +The intelligent boards also need to have their "firmware" code downloaded +to them. This is done via a user level application supplied in the driver +utility package called "stlload". Compile this program wherever you dropped +the package files, by typing "make". In its simplest form you can then type + + ./stlload -i cdk.sys + +in this directory and that will download board 0 (assuming board 0 is an +EasyConnection 8/64 or EasyConnection/RA board). To download to an +ONboard, Brumby or Stallion do: + + ./stlload -i 2681.sys + +Normally you would want all boards to be downloaded as part of the standard +system startup. To achieve this, add one of the lines above into the +/etc/rc.d/rc.S or /etc/rc.d/rc.serial file. To download each board just add +the "-b " option to the line. You will need to download code for +every board. You should probably move the stlload program into a system +directory, such as /usr/sbin. Also, the default location of the cdk.sys image +file in the stlload down-loader is /usr/lib/stallion. Create that directory +and put the cdk.sys and 2681.sys files in it. (It's a convenient place to put +them anyway). As an example your /etc/rc.d/rc.S file might have the +following lines added to it (if you had 3 boards): + + /usr/sbin/stlload -b 0 -i /usr/lib/stallion/cdk.sys + /usr/sbin/stlload -b 1 -i /usr/lib/stallion/2681.sys + /usr/sbin/stlload -b 2 -i /usr/lib/stallion/2681.sys + +The image files cdk.sys and 2681.sys are specific to the board types. The +cdk.sys will only function correctly on an EasyConnection 8/64 board. Similarly +the 2681.sys image fill only operate on ONboard, Brumby and Stallion boards. +If you load the wrong image file into a board it will fail to start up, and +of course the ports will not be operational! + +If you are using the modularized version of the driver you might want to put +the modprobe calls in the startup script as well (before the download lines +obviously). + + +3.2 USING THE SERIAL PORTS + +Once the driver is installed you will need to setup some device nodes to +access the serial ports. The simplest method is to use the /dev/MAKEDEV program. +It will automatically create device entries for Stallion boards. This will +create the normal serial port devices as /dev/ttyE# where# is the port number +starting from 0. A bank of 64 minor device numbers is allocated to each board, +so the first port on the second board is port 64,etc. A set of callout type +devices may also be created. They are created as the devices /dev/cue# where # +is the same as for the ttyE devices. + +For the most part the Stallion driver tries to emulate the standard PC system +COM ports and the standard Linux serial driver. The idea is that you should +be able to use Stallion board ports and COM ports interchangeably without +modifying anything but the device name. Anything that doesn't work like that +should be considered a bug in this driver! + +If you look at the driver code you will notice that it is fairly closely +based on the Linux serial driver (linux/drivers/char/serial.c). This is +intentional, obviously this is the easiest way to emulate its behavior! + +Since this driver tries to emulate the standard serial ports as much as +possible, most system utilities should work as they do for the standard +COM ports. Most importantly "stty" works as expected and "setserial" can +also be used (excepting the ability to auto-configure the I/O and IRQ +addresses of boards). Higher baud rates are supported in the usual fashion +through setserial or using the CBAUDEX extensions. Note that the EasyIO and +EasyConnection (all types) support at least 57600 and 115200 baud. The newer +EasyConnection XP modules and new EasyIO boards support 230400 and 460800 +baud as well. The older boards including ONboard and Brumby support a +maximum baud rate of 38400. + +If you are unfamiliar with how to use serial ports, then get the Serial-HOWTO +by Greg Hankins. It will explain everything you need to know! + + + +4. NOTES + +You can use both drivers at once if you have a mix of board types installed +in a system. However to do this you will need to change the major numbers +used by one of the drivers. Currently both drivers use major numbers 24, 25 +and 28 for their devices. Change one driver to use some other major numbers, +and then modify the mkdevnods script to make device nodes based on those new +major numbers. For example, you could change the istallion.c driver to use +major numbers 60, 61 and 62. You will also need to create device nodes with +different names for the ports, for example ttyF# and cuf#. + +The original Stallion board is no longer supported by Stallion Technologies. +Although it is known to work with the istallion driver. + +Finding a free physical memory address range can be a problem. The older +boards like the Stallion and ONboard need large areas (64K or even 128K), so +they can be very difficult to get into a system. If you have 16 Mb of RAM +then you have no choice but to put them somewhere in the 640K -> 1Mb range. +ONboards require 64K, so typically 0xd0000 is good, or 0xe0000 on some +systems. If you have an original Stallion board, "V4.0" or Rev.O, then you +need a 64K memory address space, so again 0xd0000 and 0xe0000 are good. +Older Stallion boards are a much bigger problem. They need 128K of address +space and must be on a 128K boundary. If you don't have a VGA card then +0xc0000 might be usable - there is really no other place you can put them +below 1Mb. + +Both the ONboard and old Stallion boards can use higher memory addresses as +well, but you must have less than 16Mb of RAM to be able to use them. Usual +high memory addresses used include 0xec0000 and 0xf00000. + +The Brumby boards only require 16Kb of address space, so you can usually +squeeze them in somewhere. Common addresses are 0xc8000, 0xcc000, or in +the 0xd0000 range. EasyConnection 8/64 boards are even better, they only +require 4Kb of address space, again usually 0xc8000, 0xcc000 or 0xd0000 +are good. + +If you are using an EasyConnection 8/64-EI or ONboard/E then usually the +0xd0000 or 0xe0000 ranges are the best options below 1Mb. If neither of +them can be used then the high memory support to use the really high address +ranges is the best option. Typically the 2Gb range is convenient for them, +and gets them well out of the way. + +The ports of the EasyIO-8M board do not have DCD or DTR signals. So these +ports cannot be used as real modem devices. Generally, when using these +ports you should only use the cueX devices. + +The driver utility package contains a couple of very useful programs. One +is a serial port statistics collection and display program - very handy +for solving serial port problems. The other is an extended option setting +program that works with the intelligent boards. + + + +5. DISCLAIMER + +The information contained in this document is believed to be accurate and +reliable. However, no responsibility is assumed by Stallion Technologies +Pty. Ltd. for its use, nor any infringements of patents or other rights +of third parties resulting from its use. Stallion Technologies reserves +the right to modify the design of its products and will endeavour to change +the information in manuals and accompanying documentation accordingly. + diff --git a/Documentation/serial/sx.txt b/Documentation/serial/sx.txt new file mode 100644 index 00000000000..cb4efa0fb5c --- /dev/null +++ b/Documentation/serial/sx.txt @@ -0,0 +1,294 @@ + + sx.txt -- specialix SX/SI multiport serial driver readme. + + + + Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) + + Specialix pays for the development and support of this driver. + Please DO contact support@specialix.co.uk if you require + support. + + This driver was developed in the BitWizard linux device + driver service. If you require a linux device driver for your + product, please contact devices@BitWizard.nl for a quote. + + (History) + There used to be an SI driver by Simon Allan. This is a complete + rewrite from scratch. Just a few lines-of-code have been snatched. + + (Sources) + Specialix document number 6210028: SX Host Card and Download Code + Software Functional Specification. + + (Copying) + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of + the License, or (at your option) any later version. + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + PURPOSE. See the GNU General Public License for more details. + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, + USA. + + (Addendum) + I'd appreciate it that if you have fixes, that you send them + to me first. + + +Introduction +============ + +This file contains some random information, that I like to have online +instead of in a manual that can get lost. Ever misplace your Linux +kernel sources? And the manual of one of the boards in your computer? + + +Theory of operation +=================== + +An important thing to know is that the driver itself doesn't have the +firmware for the card. This means that you need the separate package +"sx_firmware". For now you can get the source at + + ftp://ftp.bitwizard.nl/specialix/sx_firmware_.tgz + +The firmware load needs a "misc" device, so you'll need to enable the +"Support for user misc device modules" in your kernel configuration. +The misc device needs to be called "/dev/specialix_sxctl". It needs +misc major 10, and minor number 167 (assigned by HPA). The section +on creating device files below also creates this device. + +After loading the sx.o module into your kernel, the driver will report +the number of cards detected, but because it doesn't have any +firmware, it will not be able to determine the number of ports. Only +when you then run "sx_firmware" will the firmware be downloaded and +the rest of the driver initialized. At that time the sx_firmware +program will report the number of ports installed. + +In contrast with many other multi port serial cards, some of the data +structures are only allocated when the card knows the number of ports +that are connected. This means we won't waste memory for 120 port +descriptor structures when you only have 8 ports. If you experience +problems due to this, please report them: I haven't seen any. + + +Interrupts +========== + +A multi port serial card, would generate a horrendous amount of +interrupts if it would interrupt the CPU for every received +character. Even more than 10 years ago, the trick not to use +interrupts but to poll the serial cards was invented. + +The SX card allow us to do this two ways. First the card limits its +own interrupt rate to a rate that won't overwhelm the CPU. Secondly, +we could forget about the cards interrupt completely and use the +internal timer for this purpose. + +Polling the card can take up to a few percent of your CPU. Using the +interrupts would be better if you have most of the ports idle. Using +timer-based polling is better if your card almost always has work to +do. You save the separate interrupt in that case. + +In any case, it doesn't really matter all that much. + +The most common problem with interrupts is that for ISA cards in a PCI +system the BIOS has to be told to configure that interrupt as "legacy +ISA". Otherwise the card can pull on the interrupt line all it wants +but the CPU won't see this. + +If you can't get the interrupt to work, remember that polling mode is +more efficient (provided you actually use the card intensively). + + +Allowed Configurations +====================== + +Some configurations are disallowed. Even though at a glance they might +seem to work, they are known to lockup the bus between the host card +and the device concentrators. You should respect the drivers decision +not to support certain configurations. It's there for a reason. + +Warning: Seriously technical stuff ahead. Executive summary: Don't use +SX cards except configured at a 64k boundary. Skip the next paragraph. + +The SX cards can theoretically be placed at a 32k boundary. So for +instance you can put an SX card at 0xc8000-0xd7fff. This is not a +"recommended configuration". ISA cards have to tell the bus controller +how they like their timing. Due to timing issues they have to do this +based on which 64k window the address falls into. This means that the +32k window below and above the SX card have to use exactly the same +timing as the SX card. That reportedly works for other SX cards. But +you're still left with two useless 32k windows that should not be used +by anybody else. + + +Configuring the driver +====================== + +PCI cards are always detected. The driver auto-probes for ISA cards at +some sensible addresses. Please report if the auto-probe causes trouble +in your system, or when a card isn't detected. + +I'm afraid I haven't implemented "kernel command line parameters" yet. +This means that if the default doesn't work for you, you shouldn't use +the compiled-into-the-kernel version of the driver. Use a module +instead. If you convince me that you need this, I'll make it for +you. Deal? + +I'm afraid that the module parameters are a bit clumsy. If you have a +better idea, please tell me. + +You can specify several parameters: + + sx_poll: number of jiffies between timer-based polls. + + Set this to "0" to disable timer based polls. + Initialization of cards without a working interrupt + will fail. + + Set this to "1" if you want a polling driver. + (on Intel: 100 polls per second). If you don't use + fast baud rates, you might consider a value like "5". + (If you don't know how to do the math, use 1). + + sx_slowpoll: Number of jiffies between timer-based polls. + Set this to "100" to poll once a second. + This should get the card out of a stall if the driver + ever misses an interrupt. I've never seen this happen, + and if it does, that's a bug. Tell me. + + sx_maxints: Number of interrupts to request from the card. + The card normally limits interrupts to about 100 per + second to offload the host CPU. You can increase this + number to reduce latency on the card a little. + Note that if you give a very high number you can overload + your CPU as well as the CPU on the host card. This setting + is inaccurate and not recommended for SI cards (But it + works). + + sx_irqmask: The mask of allowable IRQs to use. I suggest you set + this to 0 (disable IRQs all together) and use polling if + the assignment of IRQs becomes problematic. This is defined + as the sum of (1 << irq) 's that you want to allow. So + sx_irqmask of 8 (1 << 3) specifies that only irq 3 may + be used by the SX driver. If you want to specify to the + driver: "Either irq 11 or 12 is ok for you to use", then + specify (1 << 11) | (1 << 12) = 0x1800 . + + sx_debug: You can enable different sorts of debug traces with this. + At "-1" all debugging traces are active. You'll get several + times more debugging output than you'll get characters + transmitted. + + +Baud rates +========== + +Theoretically new SXDCs should be capable of more than 460k +baud. However the line drivers usually give up before that. Also the +CPU on the card may not be able to handle 8 channels going at full +blast at that speed. Moreover, the buffers are not large enough to +allow operation with 100 interrupts per second. You'll have to realize +that the card has a 256 byte buffer, so you'll have to increase the +number of interrupts per second if you have more than 256*100 bytes +per second to transmit. If you do any performance testing in this +area, I'd be glad to hear from you... + +(Psst Linux users..... I think the Linux driver is more efficient than +the driver for other OSes. If you can and want to benchmark them +against each other, be my guest, and report your findings...... :-) + + +Ports and devices +================= + +Port 0 is the top connector on the module closest to the host +card. Oh, the ports on the SXDCs and TAs are labelled from 1 to 8 +instead of from 0 to 7, as they are numbered by linux. I'm stubborn in +this: I know for sure that I wouldn't be able to calculate which port +is which anymore if I would change that.... + + +Devices: + +You should make the device files as follows: + +#!/bin/sh +# (I recommend that you cut-and-paste this into a file and run that) +cd /dev +t=0 +mknod specialix_sxctl c 10 167 +while [ $t -lt 64 ] + do + echo -n "$t " + mknod ttyX$t c 32 $t + mknod cux$t c 33 $t + t=`expr $t + 1` +done +echo "" +rm /etc/psdevtab +ps > /dev/null + + +This creates 64 devices. If you have more, increase the constant on +the line with "while". The devices start at 0, as is customary on +Linux. Specialix seems to like starting the numbering at 1. + +If your system doesn't come with these devices pre-installed, bug your +linux-vendor about this. They should have these devices +"pre-installed" before the new millennium. The "ps" stuff at the end +is to "tell" ps that the new devices exist. + +Officially the maximum number of cards per computer is 4. This driver +however supports as many cards in one machine as you want. You'll run +out of interrupts after a few, but you can switch to polled operation +then. At about 256 ports (More than 8 cards), we run out of minor +device numbers. Sorry. I suggest you buy a second computer.... (Or +switch to RIO). + +------------------------------------------------------------------------ + + + Fixed bugs and restrictions: + - Hangup processing. + -- Done. + + - the write path in generic_serial (lockup / oops). + -- Done (Ugly: not the way I want it. Copied from serial.c). + + - write buffer isn't flushed at close. + -- Done. I still seem to lose a few chars at close. + Sorry. I think that this is a firmware issue. (-> Specialix) + + - drain hardware before changing termios + - Change debug on the fly. + - ISA free irq -1. (no firmware loaded). + - adding c8000 as a probe address. Added warning. + - Add a RAMtest for the RAM on the card.c + - Crash when opening a port "way" of the number of allowed ports. + (for example opening port 60 when there are only 24 ports attached) + - Sometimes the use-count strays a bit. After a few hours of + testing the use count is sometimes "3". If you are not like + me and can remember what you did to get it that way, I'd + appreciate an Email. Possibly fixed. Tell me if anyone still + sees this. + - TAs don't work right if you don't connect all the modem control + signals. SXDCs do. T225 firmware problem -> Specialix. + (Mostly fixed now, I think. Tell me if you encounter this!) + + Bugs & restrictions: + + - Arbitrary baud rates. Requires firmware update. (-> Specialix) + + - Low latency (mostly firmware, -> Specialix) + + + diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt new file mode 100644 index 00000000000..8e65c4498c5 --- /dev/null +++ b/Documentation/serial/tty.txt @@ -0,0 +1,292 @@ + + The Lockronomicon + +Your guide to the ancient and twisted locking policies of the tty layer and +the warped logic behind them. Beware all ye who read on. + +FIXME: still need to work out the full set of BKL assumptions and document +them so they can eventually be killed off. + + +Line Discipline +--------------- + +Line disciplines are registered with tty_register_ldisc() passing the +discipline number and the ldisc structure. At the point of registration the +discipline must be ready to use and it is possible it will get used before +the call returns success. If the call returns an error then it won't get +called. Do not re-use ldisc numbers as they are part of the userspace ABI +and writing over an existing ldisc will cause demons to eat your computer. +After the return the ldisc data has been copied so you may free your own +copy of the structure. You must not re-register over the top of the line +discipline even with the same data or your computer again will be eaten by +demons. + +In order to remove a line discipline call tty_unregister_ldisc(). +In ancient times this always worked. In modern times the function will +return -EBUSY if the ldisc is currently in use. Since the ldisc referencing +code manages the module counts this should not usually be a concern. + +Heed this warning: the reference count field of the registered copies of the +tty_ldisc structure in the ldisc table counts the number of lines using this +discipline. The reference count of the tty_ldisc structure within a tty +counts the number of active users of the ldisc at this instant. In effect it +counts the number of threads of execution within an ldisc method (plus those +about to enter and exit although this detail matters not). + +Line Discipline Methods +----------------------- + +TTY side interfaces: + +open() - Called when the line discipline is attached to + the terminal. No other call into the line + discipline for this tty will occur until it + completes successfully. Can sleep. + +close() - This is called on a terminal when the line + discipline is being unplugged. At the point of + execution no further users will enter the + ldisc code for this tty. Can sleep. + +hangup() - Called when the tty line is hung up. + The line discipline should cease I/O to the tty. + No further calls into the ldisc code will occur. + Can sleep. + +write() - A process is writing data through the line + discipline. Multiple write calls are serialized + by the tty layer for the ldisc. May sleep. + +flush_buffer() - (optional) May be called at any point between + open and close, and instructs the line discipline + to empty its input buffer. + +chars_in_buffer() - (optional) Report the number of bytes in the input + buffer. + +set_termios() - (optional) Called on termios structure changes. + The caller passes the old termios data and the + current data is in the tty. Called under the + termios semaphore so allowed to sleep. Serialized + against itself only. + +read() - Move data from the line discipline to the user. + Multiple read calls may occur in parallel and the + ldisc must deal with serialization issues. May + sleep. + +poll() - Check the status for the poll/select calls. Multiple + poll calls may occur in parallel. May sleep. + +ioctl() - Called when an ioctl is handed to the tty layer + that might be for the ldisc. Multiple ioctl calls + may occur in parallel. May sleep. + +Driver Side Interfaces: + +receive_buf() - Hand buffers of bytes from the driver to the ldisc + for processing. Semantics currently rather + mysterious 8( + +write_wakeup() - May be called at any point between open and close. + The TTY_DO_WRITE_WAKEUP flag indicates if a call + is needed but always races versus calls. Thus the + ldisc must be careful about setting order and to + handle unexpected calls. Must not sleep. + + The driver is forbidden from calling this directly + from the ->write call from the ldisc as the ldisc + is permitted to call the driver write method from + this function. In such a situation defer it. + + +Driver Access + +Line discipline methods can call the following methods of the underlying +hardware driver through the function pointers within the tty->driver +structure: + +write() Write a block of characters to the tty device. + Returns the number of characters accepted. The + character buffer passed to this method is already + in kernel space. + +put_char() Queues a character for writing to the tty device. + If there is no room in the queue, the character is + ignored. + +flush_chars() (Optional) If defined, must be called after + queueing characters with put_char() in order to + start transmission. + +write_room() Returns the numbers of characters the tty driver + will accept for queueing to be written. + +ioctl() Invoke device specific ioctl. + Expects data pointers to refer to userspace. + Returns ENOIOCTLCMD for unrecognized ioctl numbers. + +set_termios() Notify the tty driver that the device's termios + settings have changed. New settings are in + tty->termios. Previous settings should be passed in + the "old" argument. + + The API is defined such that the driver should return + the actual modes selected. This means that the + driver function is responsible for modifying any + bits in the request it cannot fulfill to indicate + the actual modes being used. A device with no + hardware capability for change (eg a USB dongle or + virtual port) can provide NULL for this method. + +throttle() Notify the tty driver that input buffers for the + line discipline are close to full, and it should + somehow signal that no more characters should be + sent to the tty. + +unthrottle() Notify the tty driver that characters can now be + sent to the tty without fear of overrunning the + input buffers of the line disciplines. + +stop() Ask the tty driver to stop outputting characters + to the tty device. + +start() Ask the tty driver to resume sending characters + to the tty device. + +hangup() Ask the tty driver to hang up the tty device. + +break_ctl() (Optional) Ask the tty driver to turn on or off + BREAK status on the RS-232 port. If state is -1, + then the BREAK status should be turned on; if + state is 0, then BREAK should be turned off. + If this routine is not implemented, use ioctls + TIOCSBRK / TIOCCBRK instead. + +wait_until_sent() Waits until the device has written out all of the + characters in its transmitter FIFO. + +send_xchar() Send a high-priority XON/XOFF character to the device. + + +Flags + +Line discipline methods have access to tty->flags field containing the +following interesting flags: + +TTY_THROTTLED Driver input is throttled. The ldisc should call + tty->driver->unthrottle() in order to resume + reception when it is ready to process more data. + +TTY_DO_WRITE_WAKEUP If set, causes the driver to call the ldisc's + write_wakeup() method in order to resume + transmission when it can accept more data + to transmit. + +TTY_IO_ERROR If set, causes all subsequent userspace read/write + calls on the tty to fail, returning -EIO. + +TTY_OTHER_CLOSED Device is a pty and the other side has closed. + +TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into + smaller chunks. + + +Locking + +Callers to the line discipline functions from the tty layer are required to +take line discipline locks. The same is true of calls from the driver side +but not yet enforced. + +Three calls are now provided + + ldisc = tty_ldisc_ref(tty); + +takes a handle to the line discipline in the tty and returns it. If no ldisc +is currently attached or the ldisc is being closed and re-opened at this +point then NULL is returned. While this handle is held the ldisc will not +change or go away. + + tty_ldisc_deref(ldisc) + +Returns the ldisc reference and allows the ldisc to be closed. Returning the +reference takes away your right to call the ldisc functions until you take +a new reference. + + ldisc = tty_ldisc_ref_wait(tty); + +Performs the same function as tty_ldisc_ref except that it will wait for an +ldisc change to complete and then return a reference to the new ldisc. + +While these functions are slightly slower than the old code they should have +minimal impact as most receive logic uses the flip buffers and they only +need to take a reference when they push bits up through the driver. + +A caution: The ldisc->open(), ldisc->close() and driver->set_ldisc +functions are called with the ldisc unavailable. Thus tty_ldisc_ref will +fail in this situation if used within these functions. Ldisc and driver +code calling its own functions must be careful in this case. + + +Driver Interface +---------------- + +open() - Called when a device is opened. May sleep + +close() - Called when a device is closed. At the point of + return from this call the driver must make no + further ldisc calls of any kind. May sleep + +write() - Called to write bytes to the device. May not + sleep. May occur in parallel in special cases. + Because this includes panic paths drivers generally + shouldn't try and do clever locking here. + +put_char() - Stuff a single character onto the queue. The + driver is guaranteed following up calls to + flush_chars. + +flush_chars() - Ask the kernel to write put_char queue + +write_room() - Return the number of characters tht can be stuffed + into the port buffers without overflow (or less). + The ldisc is responsible for being intelligent + about multi-threading of write_room/write calls + +ioctl() - Called when an ioctl may be for the driver + +set_termios() - Called on termios change, serialized against + itself by a semaphore. May sleep. + +set_ldisc() - Notifier for discipline change. At the point this + is done the discipline is not yet usable. Can now + sleep (I think) + +throttle() - Called by the ldisc to ask the driver to do flow + control. Serialization including with unthrottle + is the job of the ldisc layer. + +unthrottle() - Called by the ldisc to ask the driver to stop flow + control. + +stop() - Ldisc notifier to the driver to stop output. As with + throttle the serializations with start() are down + to the ldisc layer. + +start() - Ldisc notifier to the driver to start output. + +hangup() - Ask the tty driver to cause a hangup initiated + from the host side. [Can sleep ??] + +break_ctl() - Send RS232 break. Can sleep. Can get called in + parallel, driver must serialize (for now), and + with write calls. + +wait_until_sent() - Wait for characters to exit the hardware queue + of the driver. Can sleep + +send_xchar() - Send XON/XOFF and if possible jump the queue with + it in order to get fast flow control responses. + Cannot sleep ?? + diff --git a/Documentation/specialix.txt b/Documentation/specialix.txt deleted file mode 100644 index 6eb6f3a3331..00000000000 --- a/Documentation/specialix.txt +++ /dev/null @@ -1,383 +0,0 @@ - - specialix.txt -- specialix IO8+ multiport serial driver readme. - - - - Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) - - Specialix pays for the development and support of this driver. - Please DO contact io8-linux@specialix.co.uk if you require - support. - - This driver was developed in the BitWizard linux device - driver service. If you require a linux device driver for your - product, please contact devices@BitWizard.nl for a quote. - - This code is firmly based on the riscom/8 serial driver, - written by Dmitry Gorodchanin. The specialix IO8+ card - programming information was obtained from the CL-CD1865 Data - Book, and Specialix document number 6200059: IO8+ Hardware - Functional Specification, augmented by document number 6200088: - Merak Hardware Functional Specification. (IO8+/PCI is also - called Merak) - - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2 of - the License, or (at your option) any later version. - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - USA. - - -Intro -===== - - -This file contains some random information, that I like to have online -instead of in a manual that can get lost. Ever misplace your Linux -kernel sources? And the manual of one of the boards in your computer? - - -Addresses and interrupts -======================== - -Address dip switch settings: -The dip switch sets bits 2-9 of the IO address. - - 9 8 7 6 5 4 3 2 - +-----------------+ - 0 | X X X X X X X | - | | = IoBase = 0x100 - 1 | X | - +-----------------+ ------ RS232 connectors ----> - - | | | - edge connector - | | | - V V V - -Base address 0x100 caused a conflict in one of my computers once. I -haven't the foggiest why. My Specialix card is now at 0x180. My -other computer runs just fine with the Specialix card at 0x100.... -The card occupies 4 addresses, but actually only two are really used. - -The PCI version doesn't have any dip switches. The BIOS assigns -an IO address. - -The driver now still autoprobes at 0x100, 0x180, 0x250 and 0x260. If -that causes trouble for you, please report that. I'll remove -autoprobing then. - -The driver will tell the card what IRQ to use, so you don't have to -change any jumpers to change the IRQ. Just use a command line -argument (irq=xx) to the insmod program to set the interrupt. - -The BIOS assigns the IRQ on the PCI version. You have no say in what -IRQ to use in that case. - -If your specialix cards are not at the default locations, you can use -the kernel command line argument "specialix=io0,irq0,io1,irq1...". -Here "io0" is the io address for the first card, and "irq0" is the -irq line that the first card should use. And so on. - -Examples. - -You use the driver as a module and have three cards at 0x100, 0x250 -and 0x180. And some way or another you want them detected in that -order. Moreover irq 12 is taken (e.g. by your PS/2 mouse). - - insmod specialix.o iobase=0x100,0x250,0x180 irq=9,11,15 - -The same three cards, but now in the kernel would require you to -add - - specialix=0x100,9,0x250,11,0x180,15 - -to the command line. This would become - - append="specialix=0x100,9,0x250,11,0x180,15" - -in your /etc/lilo.conf file if you use lilo. - -The Specialix driver is slightly odd: It allows you to have the second -or third card detected without having a first card. This has -advantages and disadvantages. A slot that isn't filled by an ISA card, -might be filled if a PCI card is detected. Thus if you have an ISA -card at 0x250 and a PCI card, you would get: - -sx0: specialix IO8+ Board at 0x100 not found. -sx1: specialix IO8+ Board at 0x180 not found. -sx2: specialix IO8+ board detected at 0x250, IRQ 12, CD1865 Rev. B. -sx3: specialix IO8+ Board at 0x260 not found. -sx0: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B. - -This would happen if you don't give any probe hints to the driver. -If you would specify: - - specialix=0x250,11 - -you'd get the following messages: - -sx0: specialix IO8+ board detected at 0x250, IRQ 11, CD1865 Rev. B. -sx1: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B. - -ISA probing is aborted after the IO address you gave is exhausted, and -the PCI card is now detected as the second card. The ISA card is now -also forced to IRQ11.... - - -Baud rates -========== - -The rev 1.2 and below boards use a CL-CD1864. These chips can only -do 64kbit. The rev 1.3 and newer boards use a CL-CD1865. These chips -are officially capable of 115k2. - -The Specialix card uses a 25MHz crystal (in times two mode, which in -fact is a divided by two mode). This is not enough to reach the rated -115k2 on all ports at the same time. With this clock rate you can only -do 37% of this rate. This means that at 115k2 on all ports you are -going to lose characters (The chip cannot handle that many incoming -bits at this clock rate.) (Yes, you read that correctly: there is a -limit to the number of -=bits=- per second that the chip can handle.) - -If you near the "limit" you will first start to see a graceful -degradation in that the chip cannot keep the transmitter busy at all -times. However with a central clock this slow, you can also get it to -miss incoming characters. The driver will print a warning message when -you are outside the official specs. The messages usually show up in -the file /var/log/messages . - -The specialix card cannot reliably do 115k2. If you use it, you have -to do "extensive testing" (*) to verify if it actually works. - -When "mgetty" communicates with my modem at 115k2 it reports: -got: +++[0d]ATQ0V1H0[0d][0d][8a]O[cb][0d][8a] - ^^^^ ^^^^ ^^^^ - -The three characters that have the "^^^" under them have suffered a -bit error in the highest bit. In conclusion: I've tested it, and found -that it simply DOESN'T work for me. I also suspect that this is also -caused by the baud rate being just a little bit out of tune. - -I upgraded the crystal to 66Mhz on one of my Specialix cards. Works -great! Contact me for details. (Voids warranty, requires a steady hand -and more such restrictions....) - - -(*) Cirrus logic CD1864 databook, page 40. - - -Cables for the Specialix IO8+ -============================= - -The pinout of the connectors on the IO8+ is: - - pin short direction long name - name - Pin 1 DCD input Data Carrier Detect - Pin 2 RXD input Receive - Pin 3 DTR/RTS output Data Terminal Ready/Ready To Send - Pin 4 GND - Ground - Pin 5 TXD output Transmit - Pin 6 CTS input Clear To Send - - - -- 6 5 4 3 2 1 -- - | | - | | - | | - | | - +----- -----+ - |__________| - clip - - Front view of an RJ12 connector. Cable moves "into" the paper. - (the plug is ready to plug into your mouth this way...) - - - NULL cable. I don't know who is going to use these except for - testing purposes, but I tested the cards with this cable. (It - took quite a while to figure out, so I'm not going to delete - it. So there! :-) - - - This end goes This end needs - straight into the some twists in - RJ12 plug. the wiring. - IO8+ RJ12 IO8+ RJ12 - 1 DCD white - - - - 1 DCD - 2 RXD black 5 TXD - 3 DTR/RTS red 6 CTS - 4 GND green 4 GND - 5 TXD yellow 2 RXD - 6 CTS blue 3 DTR/RTS - - - Same NULL cable, but now sorted on the second column. - - 1 DCD white - - - - 1 DCD - 5 TXD yellow 2 RXD - 6 CTS blue 3 DTR/RTS - 4 GND green 4 GND - 2 RXD black 5 TXD - 3 DTR/RTS red 6 CTS - - - - This is a modem cable usable for hardware handshaking: - RJ12 DB25 DB9 - 1 DCD white 8 DCD 1 DCD - 2 RXD black 3 RXD 2 RXD - 3 DTR/RTS red 4 RTS 7 RTS - 4 GND green 7 GND 5 GND - 5 TXD yellow 2 TXD 3 TXD - 6 CTS blue 5 CTS 8 CTS - +---- 6 DSR 6 DSR - +---- 20 DTR 4 DTR - - This is a modem cable usable for software handshaking: - It allows you to reset the modem using the DTR ioctls. - I (REW) have never tested this, "but xxxxxxxxxxxxx - says that it works." If you test this, please - tell me and I'll fill in your name on the xxx's. - - RJ12 DB25 DB9 - 1 DCD white 8 DCD 1 DCD - 2 RXD black 3 RXD 2 RXD - 3 DTR/RTS red 20 DTR 4 DTR - 4 GND green 7 GND 5 GND - 5 TXD yellow 2 TXD 3 TXD - 6 CTS blue 5 CTS 8 CTS - +---- 6 DSR 6 DSR - +---- 4 RTS 7 RTS - - I bought a 6 wire flat cable. It was colored as indicated. - Check that yours is the same before you trust me on this. - - -Hardware handshaking issues. -============================ - -The driver can be told to operate in two different ways. The default -behaviour is specialix.sx_rtscts = 0 where the pin behaves as DTR when -hardware handshaking is off. It behaves as the RTS hardware -handshaking signal when hardware handshaking is selected. - -When you use this, you have to use the appropriate cable. The -cable will either be compatible with hardware handshaking or with -software handshaking. So switching on the fly is not really an -option. - -I actually prefer to use the "specialix.sx_rtscts=1" option. -This makes the DTR/RTS pin always an RTS pin, and ioctls to -change DTR are always ignored. I have a cable that is configured -for this. - - -Ports and devices -================= - -Port 0 is the one furthest from the card-edge connector. - -Devices: - -You should make the devices as follows: - -bash -cd /dev -for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 \ - 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -do - echo -n "$i " - mknod /dev/ttyW$i c 75 $i - mknod /dev/cuw$i c 76 $i -done -echo "" - -If your system doesn't come with these devices preinstalled, bug your -linux-vendor about this. They have had ample time to get this -implemented by now. - -You cannot have more than 4 boards in one computer. The card only -supports 4 different interrupts. If you really want this, contact me -about this and I'll give you a few tips (requires soldering iron).... - -If you have enough PCI slots, you can probably use more than 4 PCI -versions of the card though.... - -The PCI version of the card cannot adhere to the mechanical part of -the PCI spec because the 8 serial connectors are simply too large. If -it doesn't fit in your computer, bring back the card. - - ------------------------------------------------------------------------- - - - Fixed bugs and restrictions: - - During initialization, interrupts are blindly turned on. - Having a shadow variable would cause an extra memory - access on every IO instruction. - - The interrupt (on the card) should be disabled when we - don't allocate the Linux end of the interrupt. This allows - a different driver/card to use it while all ports are not in - use..... (a la standard serial port) - == An extra _off variant of the sx_in and sx_out macros are - now available. They don't set the interrupt enable bit. - These are used during initialization. Normal operation uses - the old variant which enables the interrupt line. - - RTS/DTR issue needs to be implemented according to - specialix' spec. - I kind of like the "determinism" of the current - implementation. Compile time flag? - == Ok. Compile time flag! Default is how Specialix likes it. - == Now a config time flag! Gets saved in your config file. Neat! - - Can you set the IO address from the lilo command line? - If you need this, bug me about it, I'll make it. - == Hah! No bugging needed. Fixed! :-) - - Cirrus logic hasn't gotten back to me yet why the CD1865 can - and the CD1864 can't do 115k2. I suspect that this is - because the CD1864 is not rated for 33MHz operation. - Therefore the CD1864 versions of the card can't do 115k2 on - all ports just like the CD1865 versions. The driver does - not block 115k2 on CD1864 cards. - == I called the Cirrus Logic representative here in Holland. - The CD1864 databook is identical to the CD1865 databook, - except for an extra warning at the end. Similar Bit errors - have been observed in testing at 115k2 on both an 1865 and - a 1864 chip. I see no reason why I would prohibit 115k2 on - 1864 chips and not do it on 1865 chips. Actually there is - reason to prohibit it on BOTH chips. I print a warning. - If you use 115k2, you're on your own. - - A spiky CD may send spurious HUPs. Also in CLOCAL??? - -- A fix for this turned out to be counter productive. - Different fix? Current behaviour is acceptable? - -- Maybe the current implementation is correct. If anybody - gets bitten by this, please report, and it will get fixed. - - -- Testing revealed that when in CLOCAL, the problem doesn't - occur. As warned for in the CD1865 manual, the chip may - send modem intr's on a spike. We could filter those out, - but that would be a cludge anyway (You'd still risk getting - a spurious HUP when two spikes occur.)..... - - - - Bugs & restrictions: - - This is a difficult card to autoprobe. - You have to WRITE to the address register to even - read-probe a CD186x register. Disable autodetection? - -- Specialix: any suggestions? - - diff --git a/Documentation/stallion.txt b/Documentation/stallion.txt deleted file mode 100644 index 5c4902d9a5b..00000000000 --- a/Documentation/stallion.txt +++ /dev/null @@ -1,392 +0,0 @@ -* NOTE - This is an unmaintained driver. Lantronix, which bought Stallion -technologies, is not active in driver maintenance, and they have no information -on when or if they will have a 2.6 driver. - -James Nelson - 12-12-2004 - -Stallion Multiport Serial Driver Readme ---------------------------------------- - -Copyright (C) 1994-1999, Stallion Technologies. - -Version: 5.5.1 -Date: 28MAR99 - - - -1. INTRODUCTION - -There are two drivers that work with the different families of Stallion -multiport serial boards. One is for the Stallion smart boards - that is -EasyIO, EasyConnection 8/32 and EasyConnection 8/64-PCI, the other for -the true Stallion intelligent multiport boards - EasyConnection 8/64 -(ISA, EISA, MCA), EasyConnection/RA-PCI, ONboard and Brumby. - -If you are using any of the Stallion intelligent multiport boards (Brumby, -ONboard, EasyConnection 8/64 (ISA, EISA, MCA), EasyConnection/RA-PCI) with -Linux you will need to get the driver utility package. This contains a -firmware loader and the firmware images necessary to make the devices operate. - -The Stallion Technologies ftp site, ftp.stallion.com, will always have -the latest version of the driver utility package. - -ftp://ftp.stallion.com/drivers/ata5/Linux/ata-linux-550.tar.gz - -As of the printing of this document the latest version of the driver -utility package is 5.5.0. If a later version is now available then you -should use the latest version. - -If you are using the EasyIO, EasyConnection 8/32 or EasyConnection 8/64-PCI -boards then you don't need this package, although it does have a serial stats -display program. - -If you require DIP switch settings, EISA or MCA configuration files, or any -other information related to Stallion boards then have a look at Stallion's -web pages at http://www.stallion.com. - - - -2. INSTALLATION - -The drivers can be used as loadable modules or compiled into the kernel. -You can choose which when doing a "config" on the kernel. - -All ISA, EISA and MCA boards that you want to use need to be configured into -the driver(s). All PCI boards will be automatically detected when you load -the driver - so they do not need to be entered into the driver(s) -configuration structure. Note that kernel PCI support is required to use PCI -boards. - -There are two methods of configuring ISA, EISA and MCA boards into the drivers. -If using the driver as a loadable module then the simplest method is to pass -the driver configuration as module arguments. The other method is to modify -the driver source to add configuration lines for each board in use. - -If you have pre-built Stallion driver modules then the module argument -configuration method should be used. A lot of Linux distributions come with -pre-built driver modules in /lib/modules/X.Y.Z/misc for the kernel in use. -That makes things pretty simple to get going. - - -2.1 MODULE DRIVER CONFIGURATION: - -The simplest configuration for modules is to use the module load arguments -to configure any ISA, EISA or MCA boards. PCI boards are automatically -detected, so do not need any additional configuration at all. - -If using EasyIO, EasyConnection 8/32 ISA or MCA, or EasyConnection 8/63-PCI -boards then use the "stallion" driver module, Otherwise if you are using -an EasyConnection 8/64 ISA, EISA or MCA, EasyConnection/RA-PCI, ONboard, -Brumby or original Stallion board then use the "istallion" driver module. - -Typically to load up the smart board driver use: - - modprobe stallion - -This will load the EasyIO and EasyConnection 8/32 driver. It will output a -message to say that it loaded and print the driver version number. It will -also print out whether it found the configured boards or not. These messages -may not appear on the console, but typically are always logged to -/var/adm/messages or /var/log/syslog files - depending on how the klogd and -syslogd daemons are setup on your system. - -To load the intelligent board driver use: - - modprobe istallion - -It will output similar messages to the smart board driver. - -If not using an auto-detectable board type (that is a PCI board) then you -will also need to supply command line arguments to the modprobe command -when loading the driver. The general form of the configuration argument is - - board?=[,[,][,]] - -where: - - board? -- specifies the arbitrary board number of this board, - can be in the range 0 to 3. - - name -- textual name of this board. The board name is the common - board name, or any "shortened" version of that. The board - type number may also be used here. - - ioaddr -- specifies the I/O address of this board. This argument is - optional, but should generally be specified. - - addr -- optional second address argument. Some board types require - a second I/O address, some require a memory address. The - exact meaning of this argument depends on the board type. - - irq -- optional IRQ line used by this board. - -Up to 4 board configuration arguments can be specified on the load line. -Here is some examples: - - modprobe stallion board0=easyio,0x2a0,5 - -This configures an EasyIO board as board 0 at I/O address 0x2a0 and IRQ 5. - - modprobe istallion board3=ec8/64,0x2c0,0xcc000 - -This configures an EasyConnection 8/64 ISA as board 3 at I/O address 0x2c0 at -memory address 0xcc000. - - modprobe stallion board1=ec8/32-at,0x2a0,0x280,10 - -This configures an EasyConnection 8/32 ISA board at primary I/O address 0x2a0, -secondary address 0x280 and IRQ 10. - -You will probably want to enter this module load and configuration information -into your system startup scripts so that the drivers are loaded and configured -on each system boot. Typically the start up script would be something like -/etc/modprobe.conf. - - -2.2 STATIC DRIVER CONFIGURATION: - -For static driver configuration you need to modify the driver source code. -Entering ISA, EISA and MCA boards into the driver(s) configuration structure -involves editing the driver(s) source file. It's pretty easy if you follow -the instructions below. Both drivers can support up to 4 boards. The smart -card driver (the stallion.c driver) supports any combination of EasyIO and -EasyConnection 8/32 boards (up to a total of 4). The intelligent driver -supports any combination of ONboards, Brumbys, Stallions and EasyConnection -8/64 (ISA and EISA) boards (up to a total of 4). - -To set up the driver(s) for the boards that you want to use you need to -edit the appropriate driver file and add configuration entries. - -If using EasyIO or EasyConnection 8/32 ISA or MCA boards, - In drivers/char/stallion.c: - - find the definition of the stl_brdconf array (of structures) - near the top of the file - - modify this to match the boards you are going to install - (the comments before this structure should help) - - save and exit - -If using ONboard, Brumby, Stallion or EasyConnection 8/64 (ISA or EISA) -boards, - In drivers/char/istallion.c: - - find the definition of the stli_brdconf array (of structures) - near the top of the file - - modify this to match the boards you are going to install - (the comments before this structure should help) - - save and exit - -Once you have set up the board configurations then you are ready to build -the kernel or modules. - -When the new kernel is booted, or the loadable module loaded then the -driver will emit some kernel trace messages about whether the configured -boards were detected or not. Depending on how your system logger is set -up these may come out on the console, or just be logged to -/var/adm/messages or /var/log/syslog. You should check the messages to -confirm that all is well. - - -2.3 SHARING INTERRUPTS - -It is possible to share interrupts between multiple EasyIO and -EasyConnection 8/32 boards in an EISA system. To do this you must be using -static driver configuration, modifying the driver source code to add driver -configuration. Then a couple of extra things are required: - -1. When entering the board resources into the stallion.c file you need to - mark the boards as using level triggered interrupts. Do this by replacing - the "0" entry at field position 6 (the last field) in the board - configuration structure with a "1". (This is the structure that defines - the board type, I/O locations, etc. for each board). All boards that are - sharing an interrupt must be set this way, and each board should have the - same interrupt number specified here as well. Now build the module or - kernel as you would normally. - -2. When physically installing the boards into the system you must enter - the system EISA configuration utility. You will need to install the EISA - configuration files for *all* the EasyIO and EasyConnection 8/32 boards - that are sharing interrupts. The Stallion EasyIO and EasyConnection 8/32 - EISA configuration files required are supplied by Stallion Technologies - on the EASY Utilities floppy diskette (usually supplied in the box with - the board when purchased. If not, you can pick it up from Stallion's FTP - site, ftp.stallion.com). You will need to edit the board resources to - choose level triggered interrupts, and make sure to set each board's - interrupt to the same IRQ number. - -You must complete both the above steps for this to work. When you reboot -or load the driver your EasyIO and EasyConnection 8/32 boards will be -sharing interrupts. - - -2.4 USING HIGH SHARED MEMORY - -The EasyConnection 8/64-EI, ONboard and Stallion boards are capable of -using shared memory addresses above the usual 640K - 1Mb range. The ONboard -ISA and the Stallion boards can be programmed to use memory addresses up to -16Mb (the ISA bus addressing limit), and the EasyConnection 8/64-EI and -ONboard/E can be programmed for memory addresses up to 4Gb (the EISA bus -addressing limit). - -The higher than 1Mb memory addresses are fully supported by this driver. -Just enter the address as you normally would for a lower than 1Mb address -(in the driver's board configuration structure). - - - -2.5 TROUBLE SHOOTING - -If a board is not found by the driver but is actually in the system then the -most likely problem is that the I/O address is wrong. Change the module load -argument for the loadable module form. Or change it in the driver stallion.c -or istallion.c configuration structure and rebuild the kernel or modules, or -change it on the board. - -On EasyIO and EasyConnection 8/32 boards the IRQ is software programmable, so -if there is a conflict you may need to change the IRQ used for a board. There -are no interrupts to worry about for ONboard, Brumby or EasyConnection 8/64 -(ISA, EISA and MCA) boards. The memory region on EasyConnection 8/64 and -ONboard boards is software programmable, but not on the Brumby boards. - - - -3. USING THE DRIVERS - -3.1 INTELLIGENT DRIVER OPERATION - -The intelligent boards also need to have their "firmware" code downloaded -to them. This is done via a user level application supplied in the driver -utility package called "stlload". Compile this program wherever you dropped -the package files, by typing "make". In its simplest form you can then type - - ./stlload -i cdk.sys - -in this directory and that will download board 0 (assuming board 0 is an -EasyConnection 8/64 or EasyConnection/RA board). To download to an -ONboard, Brumby or Stallion do: - - ./stlload -i 2681.sys - -Normally you would want all boards to be downloaded as part of the standard -system startup. To achieve this, add one of the lines above into the -/etc/rc.d/rc.S or /etc/rc.d/rc.serial file. To download each board just add -the "-b " option to the line. You will need to download code for -every board. You should probably move the stlload program into a system -directory, such as /usr/sbin. Also, the default location of the cdk.sys image -file in the stlload down-loader is /usr/lib/stallion. Create that directory -and put the cdk.sys and 2681.sys files in it. (It's a convenient place to put -them anyway). As an example your /etc/rc.d/rc.S file might have the -following lines added to it (if you had 3 boards): - - /usr/sbin/stlload -b 0 -i /usr/lib/stallion/cdk.sys - /usr/sbin/stlload -b 1 -i /usr/lib/stallion/2681.sys - /usr/sbin/stlload -b 2 -i /usr/lib/stallion/2681.sys - -The image files cdk.sys and 2681.sys are specific to the board types. The -cdk.sys will only function correctly on an EasyConnection 8/64 board. Similarly -the 2681.sys image fill only operate on ONboard, Brumby and Stallion boards. -If you load the wrong image file into a board it will fail to start up, and -of course the ports will not be operational! - -If you are using the modularized version of the driver you might want to put -the modprobe calls in the startup script as well (before the download lines -obviously). - - -3.2 USING THE SERIAL PORTS - -Once the driver is installed you will need to setup some device nodes to -access the serial ports. The simplest method is to use the /dev/MAKEDEV program. -It will automatically create device entries for Stallion boards. This will -create the normal serial port devices as /dev/ttyE# where# is the port number -starting from 0. A bank of 64 minor device numbers is allocated to each board, -so the first port on the second board is port 64,etc. A set of callout type -devices may also be created. They are created as the devices /dev/cue# where # -is the same as for the ttyE devices. - -For the most part the Stallion driver tries to emulate the standard PC system -COM ports and the standard Linux serial driver. The idea is that you should -be able to use Stallion board ports and COM ports interchangeably without -modifying anything but the device name. Anything that doesn't work like that -should be considered a bug in this driver! - -If you look at the driver code you will notice that it is fairly closely -based on the Linux serial driver (linux/drivers/char/serial.c). This is -intentional, obviously this is the easiest way to emulate its behavior! - -Since this driver tries to emulate the standard serial ports as much as -possible, most system utilities should work as they do for the standard -COM ports. Most importantly "stty" works as expected and "setserial" can -also be used (excepting the ability to auto-configure the I/O and IRQ -addresses of boards). Higher baud rates are supported in the usual fashion -through setserial or using the CBAUDEX extensions. Note that the EasyIO and -EasyConnection (all types) support at least 57600 and 115200 baud. The newer -EasyConnection XP modules and new EasyIO boards support 230400 and 460800 -baud as well. The older boards including ONboard and Brumby support a -maximum baud rate of 38400. - -If you are unfamiliar with how to use serial ports, then get the Serial-HOWTO -by Greg Hankins. It will explain everything you need to know! - - - -4. NOTES - -You can use both drivers at once if you have a mix of board types installed -in a system. However to do this you will need to change the major numbers -used by one of the drivers. Currently both drivers use major numbers 24, 25 -and 28 for their devices. Change one driver to use some other major numbers, -and then modify the mkdevnods script to make device nodes based on those new -major numbers. For example, you could change the istallion.c driver to use -major numbers 60, 61 and 62. You will also need to create device nodes with -different names for the ports, for example ttyF# and cuf#. - -The original Stallion board is no longer supported by Stallion Technologies. -Although it is known to work with the istallion driver. - -Finding a free physical memory address range can be a problem. The older -boards like the Stallion and ONboard need large areas (64K or even 128K), so -they can be very difficult to get into a system. If you have 16 Mb of RAM -then you have no choice but to put them somewhere in the 640K -> 1Mb range. -ONboards require 64K, so typically 0xd0000 is good, or 0xe0000 on some -systems. If you have an original Stallion board, "V4.0" or Rev.O, then you -need a 64K memory address space, so again 0xd0000 and 0xe0000 are good. -Older Stallion boards are a much bigger problem. They need 128K of address -space and must be on a 128K boundary. If you don't have a VGA card then -0xc0000 might be usable - there is really no other place you can put them -below 1Mb. - -Both the ONboard and old Stallion boards can use higher memory addresses as -well, but you must have less than 16Mb of RAM to be able to use them. Usual -high memory addresses used include 0xec0000 and 0xf00000. - -The Brumby boards only require 16Kb of address space, so you can usually -squeeze them in somewhere. Common addresses are 0xc8000, 0xcc000, or in -the 0xd0000 range. EasyConnection 8/64 boards are even better, they only -require 4Kb of address space, again usually 0xc8000, 0xcc000 or 0xd0000 -are good. - -If you are using an EasyConnection 8/64-EI or ONboard/E then usually the -0xd0000 or 0xe0000 ranges are the best options below 1Mb. If neither of -them can be used then the high memory support to use the really high address -ranges is the best option. Typically the 2Gb range is convenient for them, -and gets them well out of the way. - -The ports of the EasyIO-8M board do not have DCD or DTR signals. So these -ports cannot be used as real modem devices. Generally, when using these -ports you should only use the cueX devices. - -The driver utility package contains a couple of very useful programs. One -is a serial port statistics collection and display program - very handy -for solving serial port problems. The other is an extended option setting -program that works with the intelligent boards. - - - -5. DISCLAIMER - -The information contained in this document is believed to be accurate and -reliable. However, no responsibility is assumed by Stallion Technologies -Pty. Ltd. for its use, nor any infringements of patents or other rights -of third parties resulting from its use. Stallion Technologies reserves -the right to modify the design of its products and will endeavour to change -the information in manuals and accompanying documentation accordingly. - diff --git a/Documentation/sx.txt b/Documentation/sx.txt deleted file mode 100644 index cb4efa0fb5c..00000000000 --- a/Documentation/sx.txt +++ /dev/null @@ -1,294 +0,0 @@ - - sx.txt -- specialix SX/SI multiport serial driver readme. - - - - Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) - - Specialix pays for the development and support of this driver. - Please DO contact support@specialix.co.uk if you require - support. - - This driver was developed in the BitWizard linux device - driver service. If you require a linux device driver for your - product, please contact devices@BitWizard.nl for a quote. - - (History) - There used to be an SI driver by Simon Allan. This is a complete - rewrite from scratch. Just a few lines-of-code have been snatched. - - (Sources) - Specialix document number 6210028: SX Host Card and Download Code - Software Functional Specification. - - (Copying) - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2 of - the License, or (at your option) any later version. - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - USA. - - (Addendum) - I'd appreciate it that if you have fixes, that you send them - to me first. - - -Introduction -============ - -This file contains some random information, that I like to have online -instead of in a manual that can get lost. Ever misplace your Linux -kernel sources? And the manual of one of the boards in your computer? - - -Theory of operation -=================== - -An important thing to know is that the driver itself doesn't have the -firmware for the card. This means that you need the separate package -"sx_firmware". For now you can get the source at - - ftp://ftp.bitwizard.nl/specialix/sx_firmware_.tgz - -The firmware load needs a "misc" device, so you'll need to enable the -"Support for user misc device modules" in your kernel configuration. -The misc device needs to be called "/dev/specialix_sxctl". It needs -misc major 10, and minor number 167 (assigned by HPA). The section -on creating device files below also creates this device. - -After loading the sx.o module into your kernel, the driver will report -the number of cards detected, but because it doesn't have any -firmware, it will not be able to determine the number of ports. Only -when you then run "sx_firmware" will the firmware be downloaded and -the rest of the driver initialized. At that time the sx_firmware -program will report the number of ports installed. - -In contrast with many other multi port serial cards, some of the data -structures are only allocated when the card knows the number of ports -that are connected. This means we won't waste memory for 120 port -descriptor structures when you only have 8 ports. If you experience -problems due to this, please report them: I haven't seen any. - - -Interrupts -========== - -A multi port serial card, would generate a horrendous amount of -interrupts if it would interrupt the CPU for every received -character. Even more than 10 years ago, the trick not to use -interrupts but to poll the serial cards was invented. - -The SX card allow us to do this two ways. First the card limits its -own interrupt rate to a rate that won't overwhelm the CPU. Secondly, -we could forget about the cards interrupt completely and use the -internal timer for this purpose. - -Polling the card can take up to a few percent of your CPU. Using the -interrupts would be better if you have most of the ports idle. Using -timer-based polling is better if your card almost always has work to -do. You save the separate interrupt in that case. - -In any case, it doesn't really matter all that much. - -The most common problem with interrupts is that for ISA cards in a PCI -system the BIOS has to be told to configure that interrupt as "legacy -ISA". Otherwise the card can pull on the interrupt line all it wants -but the CPU won't see this. - -If you can't get the interrupt to work, remember that polling mode is -more efficient (provided you actually use the card intensively). - - -Allowed Configurations -====================== - -Some configurations are disallowed. Even though at a glance they might -seem to work, they are known to lockup the bus between the host card -and the device concentrators. You should respect the drivers decision -not to support certain configurations. It's there for a reason. - -Warning: Seriously technical stuff ahead. Executive summary: Don't use -SX cards except configured at a 64k boundary. Skip the next paragraph. - -The SX cards can theoretically be placed at a 32k boundary. So for -instance you can put an SX card at 0xc8000-0xd7fff. This is not a -"recommended configuration". ISA cards have to tell the bus controller -how they like their timing. Due to timing issues they have to do this -based on which 64k window the address falls into. This means that the -32k window below and above the SX card have to use exactly the same -timing as the SX card. That reportedly works for other SX cards. But -you're still left with two useless 32k windows that should not be used -by anybody else. - - -Configuring the driver -====================== - -PCI cards are always detected. The driver auto-probes for ISA cards at -some sensible addresses. Please report if the auto-probe causes trouble -in your system, or when a card isn't detected. - -I'm afraid I haven't implemented "kernel command line parameters" yet. -This means that if the default doesn't work for you, you shouldn't use -the compiled-into-the-kernel version of the driver. Use a module -instead. If you convince me that you need this, I'll make it for -you. Deal? - -I'm afraid that the module parameters are a bit clumsy. If you have a -better idea, please tell me. - -You can specify several parameters: - - sx_poll: number of jiffies between timer-based polls. - - Set this to "0" to disable timer based polls. - Initialization of cards without a working interrupt - will fail. - - Set this to "1" if you want a polling driver. - (on Intel: 100 polls per second). If you don't use - fast baud rates, you might consider a value like "5". - (If you don't know how to do the math, use 1). - - sx_slowpoll: Number of jiffies between timer-based polls. - Set this to "100" to poll once a second. - This should get the card out of a stall if the driver - ever misses an interrupt. I've never seen this happen, - and if it does, that's a bug. Tell me. - - sx_maxints: Number of interrupts to request from the card. - The card normally limits interrupts to about 100 per - second to offload the host CPU. You can increase this - number to reduce latency on the card a little. - Note that if you give a very high number you can overload - your CPU as well as the CPU on the host card. This setting - is inaccurate and not recommended for SI cards (But it - works). - - sx_irqmask: The mask of allowable IRQs to use. I suggest you set - this to 0 (disable IRQs all together) and use polling if - the assignment of IRQs becomes problematic. This is defined - as the sum of (1 << irq) 's that you want to allow. So - sx_irqmask of 8 (1 << 3) specifies that only irq 3 may - be used by the SX driver. If you want to specify to the - driver: "Either irq 11 or 12 is ok for you to use", then - specify (1 << 11) | (1 << 12) = 0x1800 . - - sx_debug: You can enable different sorts of debug traces with this. - At "-1" all debugging traces are active. You'll get several - times more debugging output than you'll get characters - transmitted. - - -Baud rates -========== - -Theoretically new SXDCs should be capable of more than 460k -baud. However the line drivers usually give up before that. Also the -CPU on the card may not be able to handle 8 channels going at full -blast at that speed. Moreover, the buffers are not large enough to -allow operation with 100 interrupts per second. You'll have to realize -that the card has a 256 byte buffer, so you'll have to increase the -number of interrupts per second if you have more than 256*100 bytes -per second to transmit. If you do any performance testing in this -area, I'd be glad to hear from you... - -(Psst Linux users..... I think the Linux driver is more efficient than -the driver for other OSes. If you can and want to benchmark them -against each other, be my guest, and report your findings...... :-) - - -Ports and devices -================= - -Port 0 is the top connector on the module closest to the host -card. Oh, the ports on the SXDCs and TAs are labelled from 1 to 8 -instead of from 0 to 7, as they are numbered by linux. I'm stubborn in -this: I know for sure that I wouldn't be able to calculate which port -is which anymore if I would change that.... - - -Devices: - -You should make the device files as follows: - -#!/bin/sh -# (I recommend that you cut-and-paste this into a file and run that) -cd /dev -t=0 -mknod specialix_sxctl c 10 167 -while [ $t -lt 64 ] - do - echo -n "$t " - mknod ttyX$t c 32 $t - mknod cux$t c 33 $t - t=`expr $t + 1` -done -echo "" -rm /etc/psdevtab -ps > /dev/null - - -This creates 64 devices. If you have more, increase the constant on -the line with "while". The devices start at 0, as is customary on -Linux. Specialix seems to like starting the numbering at 1. - -If your system doesn't come with these devices pre-installed, bug your -linux-vendor about this. They should have these devices -"pre-installed" before the new millennium. The "ps" stuff at the end -is to "tell" ps that the new devices exist. - -Officially the maximum number of cards per computer is 4. This driver -however supports as many cards in one machine as you want. You'll run -out of interrupts after a few, but you can switch to polled operation -then. At about 256 ports (More than 8 cards), we run out of minor -device numbers. Sorry. I suggest you buy a second computer.... (Or -switch to RIO). - ------------------------------------------------------------------------- - - - Fixed bugs and restrictions: - - Hangup processing. - -- Done. - - - the write path in generic_serial (lockup / oops). - -- Done (Ugly: not the way I want it. Copied from serial.c). - - - write buffer isn't flushed at close. - -- Done. I still seem to lose a few chars at close. - Sorry. I think that this is a firmware issue. (-> Specialix) - - - drain hardware before changing termios - - Change debug on the fly. - - ISA free irq -1. (no firmware loaded). - - adding c8000 as a probe address. Added warning. - - Add a RAMtest for the RAM on the card.c - - Crash when opening a port "way" of the number of allowed ports. - (for example opening port 60 when there are only 24 ports attached) - - Sometimes the use-count strays a bit. After a few hours of - testing the use count is sometimes "3". If you are not like - me and can remember what you did to get it that way, I'd - appreciate an Email. Possibly fixed. Tell me if anyone still - sees this. - - TAs don't work right if you don't connect all the modem control - signals. SXDCs do. T225 firmware problem -> Specialix. - (Mostly fixed now, I think. Tell me if you encounter this!) - - Bugs & restrictions: - - - Arbitrary baud rates. Requires firmware update. (-> Specialix) - - - Low latency (mostly firmware, -> Specialix) - - - diff --git a/Documentation/tty.txt b/Documentation/tty.txt deleted file mode 100644 index 8e65c4498c5..00000000000 --- a/Documentation/tty.txt +++ /dev/null @@ -1,292 +0,0 @@ - - The Lockronomicon - -Your guide to the ancient and twisted locking policies of the tty layer and -the warped logic behind them. Beware all ye who read on. - -FIXME: still need to work out the full set of BKL assumptions and document -them so they can eventually be killed off. - - -Line Discipline ---------------- - -Line disciplines are registered with tty_register_ldisc() passing the -discipline number and the ldisc structure. At the point of registration the -discipline must be ready to use and it is possible it will get used before -the call returns success. If the call returns an error then it won't get -called. Do not re-use ldisc numbers as they are part of the userspace ABI -and writing over an existing ldisc will cause demons to eat your computer. -After the return the ldisc data has been copied so you may free your own -copy of the structure. You must not re-register over the top of the line -discipline even with the same data or your computer again will be eaten by -demons. - -In order to remove a line discipline call tty_unregister_ldisc(). -In ancient times this always worked. In modern times the function will -return -EBUSY if the ldisc is currently in use. Since the ldisc referencing -code manages the module counts this should not usually be a concern. - -Heed this warning: the reference count field of the registered copies of the -tty_ldisc structure in the ldisc table counts the number of lines using this -discipline. The reference count of the tty_ldisc structure within a tty -counts the number of active users of the ldisc at this instant. In effect it -counts the number of threads of execution within an ldisc method (plus those -about to enter and exit although this detail matters not). - -Line Discipline Methods ------------------------ - -TTY side interfaces: - -open() - Called when the line discipline is attached to - the terminal. No other call into the line - discipline for this tty will occur until it - completes successfully. Can sleep. - -close() - This is called on a terminal when the line - discipline is being unplugged. At the point of - execution no further users will enter the - ldisc code for this tty. Can sleep. - -hangup() - Called when the tty line is hung up. - The line discipline should cease I/O to the tty. - No further calls into the ldisc code will occur. - Can sleep. - -write() - A process is writing data through the line - discipline. Multiple write calls are serialized - by the tty layer for the ldisc. May sleep. - -flush_buffer() - (optional) May be called at any point between - open and close, and instructs the line discipline - to empty its input buffer. - -chars_in_buffer() - (optional) Report the number of bytes in the input - buffer. - -set_termios() - (optional) Called on termios structure changes. - The caller passes the old termios data and the - current data is in the tty. Called under the - termios semaphore so allowed to sleep. Serialized - against itself only. - -read() - Move data from the line discipline to the user. - Multiple read calls may occur in parallel and the - ldisc must deal with serialization issues. May - sleep. - -poll() - Check the status for the poll/select calls. Multiple - poll calls may occur in parallel. May sleep. - -ioctl() - Called when an ioctl is handed to the tty layer - that might be for the ldisc. Multiple ioctl calls - may occur in parallel. May sleep. - -Driver Side Interfaces: - -receive_buf() - Hand buffers of bytes from the driver to the ldisc - for processing. Semantics currently rather - mysterious 8( - -write_wakeup() - May be called at any point between open and close. - The TTY_DO_WRITE_WAKEUP flag indicates if a call - is needed but always races versus calls. Thus the - ldisc must be careful about setting order and to - handle unexpected calls. Must not sleep. - - The driver is forbidden from calling this directly - from the ->write call from the ldisc as the ldisc - is permitted to call the driver write method from - this function. In such a situation defer it. - - -Driver Access - -Line discipline methods can call the following methods of the underlying -hardware driver through the function pointers within the tty->driver -structure: - -write() Write a block of characters to the tty device. - Returns the number of characters accepted. The - character buffer passed to this method is already - in kernel space. - -put_char() Queues a character for writing to the tty device. - If there is no room in the queue, the character is - ignored. - -flush_chars() (Optional) If defined, must be called after - queueing characters with put_char() in order to - start transmission. - -write_room() Returns the numbers of characters the tty driver - will accept for queueing to be written. - -ioctl() Invoke device specific ioctl. - Expects data pointers to refer to userspace. - Returns ENOIOCTLCMD for unrecognized ioctl numbers. - -set_termios() Notify the tty driver that the device's termios - settings have changed. New settings are in - tty->termios. Previous settings should be passed in - the "old" argument. - - The API is defined such that the driver should return - the actual modes selected. This means that the - driver function is responsible for modifying any - bits in the request it cannot fulfill to indicate - the actual modes being used. A device with no - hardware capability for change (eg a USB dongle or - virtual port) can provide NULL for this method. - -throttle() Notify the tty driver that input buffers for the - line discipline are close to full, and it should - somehow signal that no more characters should be - sent to the tty. - -unthrottle() Notify the tty driver that characters can now be - sent to the tty without fear of overrunning the - input buffers of the line disciplines. - -stop() Ask the tty driver to stop outputting characters - to the tty device. - -start() Ask the tty driver to resume sending characters - to the tty device. - -hangup() Ask the tty driver to hang up the tty device. - -break_ctl() (Optional) Ask the tty driver to turn on or off - BREAK status on the RS-232 port. If state is -1, - then the BREAK status should be turned on; if - state is 0, then BREAK should be turned off. - If this routine is not implemented, use ioctls - TIOCSBRK / TIOCCBRK instead. - -wait_until_sent() Waits until the device has written out all of the - characters in its transmitter FIFO. - -send_xchar() Send a high-priority XON/XOFF character to the device. - - -Flags - -Line discipline methods have access to tty->flags field containing the -following interesting flags: - -TTY_THROTTLED Driver input is throttled. The ldisc should call - tty->driver->unthrottle() in order to resume - reception when it is ready to process more data. - -TTY_DO_WRITE_WAKEUP If set, causes the driver to call the ldisc's - write_wakeup() method in order to resume - transmission when it can accept more data - to transmit. - -TTY_IO_ERROR If set, causes all subsequent userspace read/write - calls on the tty to fail, returning -EIO. - -TTY_OTHER_CLOSED Device is a pty and the other side has closed. - -TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into - smaller chunks. - - -Locking - -Callers to the line discipline functions from the tty layer are required to -take line discipline locks. The same is true of calls from the driver side -but not yet enforced. - -Three calls are now provided - - ldisc = tty_ldisc_ref(tty); - -takes a handle to the line discipline in the tty and returns it. If no ldisc -is currently attached or the ldisc is being closed and re-opened at this -point then NULL is returned. While this handle is held the ldisc will not -change or go away. - - tty_ldisc_deref(ldisc) - -Returns the ldisc reference and allows the ldisc to be closed. Returning the -reference takes away your right to call the ldisc functions until you take -a new reference. - - ldisc = tty_ldisc_ref_wait(tty); - -Performs the same function as tty_ldisc_ref except that it will wait for an -ldisc change to complete and then return a reference to the new ldisc. - -While these functions are slightly slower than the old code they should have -minimal impact as most receive logic uses the flip buffers and they only -need to take a reference when they push bits up through the driver. - -A caution: The ldisc->open(), ldisc->close() and driver->set_ldisc -functions are called with the ldisc unavailable. Thus tty_ldisc_ref will -fail in this situation if used within these functions. Ldisc and driver -code calling its own functions must be careful in this case. - - -Driver Interface ----------------- - -open() - Called when a device is opened. May sleep - -close() - Called when a device is closed. At the point of - return from this call the driver must make no - further ldisc calls of any kind. May sleep - -write() - Called to write bytes to the device. May not - sleep. May occur in parallel in special cases. - Because this includes panic paths drivers generally - shouldn't try and do clever locking here. - -put_char() - Stuff a single character onto the queue. The - driver is guaranteed following up calls to - flush_chars. - -flush_chars() - Ask the kernel to write put_char queue - -write_room() - Return the number of characters tht can be stuffed - into the port buffers without overflow (or less). - The ldisc is responsible for being intelligent - about multi-threading of write_room/write calls - -ioctl() - Called when an ioctl may be for the driver - -set_termios() - Called on termios change, serialized against - itself by a semaphore. May sleep. - -set_ldisc() - Notifier for discipline change. At the point this - is done the discipline is not yet usable. Can now - sleep (I think) - -throttle() - Called by the ldisc to ask the driver to do flow - control. Serialization including with unthrottle - is the job of the ldisc layer. - -unthrottle() - Called by the ldisc to ask the driver to stop flow - control. - -stop() - Ldisc notifier to the driver to stop output. As with - throttle the serializations with start() are down - to the ldisc layer. - -start() - Ldisc notifier to the driver to start output. - -hangup() - Ask the tty driver to cause a hangup initiated - from the host side. [Can sleep ??] - -break_ctl() - Send RS232 break. Can sleep. Can get called in - parallel, driver must serialize (for now), and - with write calls. - -wait_until_sent() - Wait for characters to exit the hardware queue - of the driver. Can sleep - -send_xchar() - Send XON/XOFF and if possible jump the queue with - it in order to get fast flow control responses. - Cannot sleep ?? - diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 61ad8d639ba..0344a8a8321 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -21,7 +21,8 @@ config BLK_DEV_FD ---help--- If you want to use the floppy disk drive(s) of your PC under Linux, say Y. Information about this driver, especially important for IBM - Thinkpad users, is contained in . + Thinkpad users, is contained in + . That file also contains the location of the Floppy driver FAQ as well as location of the fdutils package used to configure additional parameters of the driver at run time. @@ -76,7 +77,7 @@ config PARIDE your computer's parallel port. Most of them are actually IDE devices using a parallel port IDE adapter. This option enables the PARIDE subsystem which contains drivers for many of these external drives. - Read for more information. + Read for more information. If you have said Y to the "Parallel-port support" configuration option, you may share a single port between your printer and other @@ -114,9 +115,9 @@ config BLK_CPQ_DA help This is the driver for Compaq Smart Array controllers. Everyone using these boards should say Y here. See the file - for the current list of boards - supported by this driver, and for further information on the use of - this driver. + for the current list of + boards supported by this driver, and for further information on the + use of this driver. config BLK_CPQ_CISS_DA tristate "Compaq Smart Array 5xxx support" @@ -124,7 +125,7 @@ config BLK_CPQ_CISS_DA help This is the driver for Compaq Smart Array 5xxx controllers. Everyone using these boards should say Y here. - See for the current list of + See for the current list of boards supported by this driver, and for further information on the use of this driver. @@ -135,7 +136,7 @@ config CISS_SCSI_TAPE help When enabled (Y), this option allows SCSI tape drives and SCSI medium changers (tape robots) to be accessed via a Compaq 5xxx array - controller. (See for more details.) + controller. (See for more details.) "SCSI support" and "SCSI tape support" must also be enabled for this option to work. @@ -149,8 +150,8 @@ config BLK_DEV_DAC960 help This driver adds support for the Mylex DAC960, AcceleRAID, and eXtremeRAID PCI RAID controllers. See the file - for further information about - this driver. + for further information + about this driver. To compile this driver as a module, choose M here: the module will be called DAC960. @@ -278,9 +279,9 @@ config BLK_DEV_NBD userland (making server and client physically the same computer, communicating using the loopback network device). - Read for more information, especially - about where to find the server code, which runs in user space and - does not need special kernel support. + Read for more information, + especially about where to find the server code, which runs in user + space and does not need special kernel support. Note that this has nothing to do with the network file systems NFS or Coda; you can say N here even if you intend to use NFS or Coda. @@ -321,8 +322,8 @@ config BLK_DEV_RAM store a copy of a minimal root file system off of a floppy into RAM during the initial install of Linux. - Note that the kernel command line option "ramdisk=XX" is now - obsolete. For details, read . + Note that the kernel command line option "ramdisk=XX" is now obsolete. + For details, read . To compile this driver as a module, choose M here: the module will be called rd. diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 14db747a636..cf29cc4e6ab 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4124,7 +4124,7 @@ static int __init floppy_setup(char *str) printk("\n"); } else DPRINT("botched floppy option\n"); - DPRINT("Read Documentation/floppy.txt\n"); + DPRINT("Read Documentation/blockdev/floppy.txt\n"); return 0; } diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 43b35d0369d..43d6ba83a19 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -124,7 +124,7 @@ config COMPUTONE which give you many serial ports. You would need something like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you have a card like that, say - Y here and read . + Y here and read . To compile this driver as module, choose M here: the module will be called ip2. @@ -136,7 +136,7 @@ config ROCKETPORT This driver supports Comtrol RocketPort and RocketModem PCI boards. These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or modems. For information about the RocketPort/RocketModem boards - and this driver read . + and this driver read . To compile this driver as a module, choose M here: the module will be called rocket. @@ -154,7 +154,7 @@ config CYCLADES your Linux box, for instance in order to become a dial-in server. For information about the Cyclades-Z card, read - . + . To compile this driver as a module, choose M here: the module will be called cyclades. @@ -183,7 +183,7 @@ config DIGIEPCA box, for instance in order to become a dial-in server. This driver supports the original PC (ISA) boards as well as PCI, and EISA. If you have a card like this, say Y here and read the file - . + . To compile this driver as a module, choose M here: the module will be called epca. @@ -289,7 +289,7 @@ config RISCOM8 which gives you many serial ports. You would need something like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you have a card like that, - say Y here and read the file . + say Y here and read the file . Also it's possible to say M here and compile this driver as kernel loadable module; the module will be called riscom8. @@ -304,8 +304,8 @@ config SPECIALIX your Linux box, for instance in order to become a dial-in server. If you have a card like that, say Y here and read the file - . Also it's possible to say M here - and compile this driver as kernel loadable module which will be + . Also it's possible to say + M here and compile this driver as kernel loadable module which will be called specialix. config SX @@ -313,7 +313,7 @@ config SX depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) help This is a driver for the SX and SI multiport serial cards. - Please read the file for details. + Please read the file for details. This driver can only be built as a module ( = code which can be inserted in and removed from the running kernel whenever you want). @@ -344,8 +344,8 @@ config STALDRV like this to connect more than two modems to your Linux box, for instance in order to become a dial-in server. If you say Y here, you will be asked for your specific card model in the next - questions. Make sure to read in - this case. If you have never heard about all this, it's safe to + questions. Make sure to read + in this case. If you have never heard about all this, it's safe to say N. config STALLION @@ -354,7 +354,7 @@ config STALLION help If you have an EasyIO or EasyConnection 8/32 multiport Stallion card, then this is for you; say Y. Make sure to read - . + . To compile this driver as a module, choose M here: the module will be called stallion. @@ -365,7 +365,7 @@ config ISTALLION help If you have an EasyConnection 8/64, ONboard, Brumby or Stallion serial multiport card, say Y here. Make sure to read - . + . To compile this driver as a module, choose M here: the module will be called istallion. diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index 242fd46fda2..a16b94f12eb 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -72,7 +72,7 @@ /* * There is a bunch of documentation about the card, jumpers, config * settings, restrictions, cables, device names and numbers in - * Documentation/specialix.txt + * Documentation/serial/specialix.txt */ #include -- cgit v1.2.3-70-g09d2 From 4ff429e658c00bcf5101eabbebd4f711572a64cb Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 12 Nov 2008 13:05:17 -0800 Subject: 9p: restrict RDMA usage linux-next: Make 9p's RDMA option depend on INET since it uses Infiniband rdma_* functions and that code depends on INET. Otherwise 9p can try to use symbols which don't exist. ERROR: "rdma_destroy_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_connect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_qp" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_route" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_disconnect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_addr" [net/9p/9pnet_rdma.ko] undefined! I used an if/endif block so that the menu items would remain presented together. Also correct an article adjective. Signed-off-by: Randy Dunlap Signed-off-by: Eric Van Hensbergen --- net/9p/Kconfig | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/9p/Kconfig b/net/9p/Kconfig index c42c0c400bf..0663f99e977 100644 --- a/net/9p/Kconfig +++ b/net/9p/Kconfig @@ -13,22 +13,24 @@ menuconfig NET_9P If unsure, say N. +if NET_9P + config NET_9P_VIRTIO - depends on NET_9P && EXPERIMENTAL && VIRTIO + depends on EXPERIMENTAL && VIRTIO tristate "9P Virtio Transport (Experimental)" help This builds support for a transports between guest partitions and a host partition. config NET_9P_RDMA - depends on NET_9P && INFINIBAND && EXPERIMENTAL + depends on INET && INFINIBAND && EXPERIMENTAL tristate "9P RDMA Transport (Experimental)" help - This builds support for a RDMA transport. + This builds support for an RDMA transport. config NET_9P_DEBUG bool "Debug information" - depends on NET_9P help Say Y if you want the 9P subsystem to log debug information. +endif -- cgit v1.2.3-70-g09d2 From e3e081e1d5c4791f4416ed57b7a2f143ab9e5b09 Mon Sep 17 00:00:00 2001 From: Santwona Behera Date: Fri, 14 Nov 2008 14:44:08 -0800 Subject: NIU: Add Sun CP3260 ATCA blade support This patch adds support for the Sun CP3260 ATCA blade which is a N2 based ATCA blade with 2 NIU ports. The NIU ports do not have on-board PHY. Signed-off-by: Santwona Behera Signed-off-by: David S. Miller --- drivers/net/niu.c | 286 ++++++++++++++++++++++++++++++++++++++++++++++++++++-- drivers/net/niu.h | 13 +++ 2 files changed, 293 insertions(+), 6 deletions(-) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index d8463b1c3df..be6b4d7e2bb 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -406,7 +406,7 @@ static int esr2_set_rx_cfg(struct niu *np, unsigned long channel, u32 val) } /* Mode is always 10G fiber. */ -static int serdes_init_niu(struct niu *np) +static int serdes_init_niu_10g_fiber(struct niu *np) { struct niu_link_config *lp = &np->link_config; u32 tx_cfg, rx_cfg; @@ -443,6 +443,223 @@ static int serdes_init_niu(struct niu *np) return 0; } +static int serdes_init_niu_1g_serdes(struct niu *np) +{ + struct niu_link_config *lp = &np->link_config; + u16 pll_cfg, pll_sts; + int max_retry = 100; + u64 sig, mask, val; + u32 tx_cfg, rx_cfg; + unsigned long i; + int err; + + tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV | + PLL_TX_CFG_RATE_HALF); + rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT | + PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH | + PLL_RX_CFG_RATE_HALF); + + if (np->port == 0) + rx_cfg |= PLL_RX_CFG_EQ_LP_ADAPTIVE; + + if (lp->loopback_mode == LOOPBACK_PHY) { + u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS; + + mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_TEST_CFG_L, test_cfg); + + tx_cfg |= PLL_TX_CFG_ENTEST; + rx_cfg |= PLL_RX_CFG_ENTEST; + } + + /* Initialize PLL for 1G */ + pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_8X); + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_CFG_L, pll_cfg); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_1g_serdes: " + "mdio write to ESR2_TI_PLL_CFG_L failed", np->port); + return err; + } + + pll_sts = PLL_CFG_ENPLL; + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_STS_L, pll_sts); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_1g_serdes: " + "mdio write to ESR2_TI_PLL_STS_L failed", np->port); + return err; + } + + udelay(200); + + /* Initialize all 4 lanes of the SERDES. */ + for (i = 0; i < 4; i++) { + err = esr2_set_tx_cfg(np, i, tx_cfg); + if (err) + return err; + } + + for (i = 0; i < 4; i++) { + err = esr2_set_rx_cfg(np, i, rx_cfg); + if (err) + return err; + } + + switch (np->port) { + case 0: + val = (ESR_INT_SRDY0_P0 | ESR_INT_DET0_P0); + mask = val; + break; + + case 1: + val = (ESR_INT_SRDY0_P1 | ESR_INT_DET0_P1); + mask = val; + break; + + default: + return -EINVAL; + } + + while (max_retry--) { + sig = nr64(ESR_INT_SIGNALS); + if ((sig & mask) == val) + break; + + mdelay(500); + } + + if ((sig & mask) != val) { + dev_err(np->device, PFX "Port %u signal bits [%08x] are not " + "[%08x]\n", np->port, (int) (sig & mask), (int) val); + return -ENODEV; + } + + return 0; +} + +static int serdes_init_niu_10g_serdes(struct niu *np) +{ + struct niu_link_config *lp = &np->link_config; + u32 tx_cfg, rx_cfg, pll_cfg, pll_sts; + int max_retry = 100; + u64 sig, mask, val; + unsigned long i; + int err; + + tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV); + rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT | + PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH | + PLL_RX_CFG_EQ_LP_ADAPTIVE); + + if (lp->loopback_mode == LOOPBACK_PHY) { + u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS; + + mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_TEST_CFG_L, test_cfg); + + tx_cfg |= PLL_TX_CFG_ENTEST; + rx_cfg |= PLL_RX_CFG_ENTEST; + } + + /* Initialize PLL for 10G */ + pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_10X); + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_CFG_L, pll_cfg & 0xffff); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_10g_serdes: " + "mdio write to ESR2_TI_PLL_CFG_L failed", np->port); + return err; + } + + pll_sts = PLL_CFG_ENPLL; + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_STS_L, pll_sts & 0xffff); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_10g_serdes: " + "mdio write to ESR2_TI_PLL_STS_L failed", np->port); + return err; + } + + udelay(200); + + /* Initialize all 4 lanes of the SERDES. */ + for (i = 0; i < 4; i++) { + err = esr2_set_tx_cfg(np, i, tx_cfg); + if (err) + return err; + } + + for (i = 0; i < 4; i++) { + err = esr2_set_rx_cfg(np, i, rx_cfg); + if (err) + return err; + } + + /* check if serdes is ready */ + + switch (np->port) { + case 0: + mask = ESR_INT_SIGNALS_P0_BITS; + val = (ESR_INT_SRDY0_P0 | + ESR_INT_DET0_P0 | + ESR_INT_XSRDY_P0 | + ESR_INT_XDP_P0_CH3 | + ESR_INT_XDP_P0_CH2 | + ESR_INT_XDP_P0_CH1 | + ESR_INT_XDP_P0_CH0); + break; + + case 1: + mask = ESR_INT_SIGNALS_P1_BITS; + val = (ESR_INT_SRDY0_P1 | + ESR_INT_DET0_P1 | + ESR_INT_XSRDY_P1 | + ESR_INT_XDP_P1_CH3 | + ESR_INT_XDP_P1_CH2 | + ESR_INT_XDP_P1_CH1 | + ESR_INT_XDP_P1_CH0); + break; + + default: + return -EINVAL; + } + + while (max_retry--) { + sig = nr64(ESR_INT_SIGNALS); + if ((sig & mask) == val) + break; + + mdelay(500); + } + + if ((sig & mask) != val) { + pr_info(PFX "NIU Port %u signal bits [%08x] are not " + "[%08x] for 10G...trying 1G\n", + np->port, (int) (sig & mask), (int) val); + + /* 10G failed, try initializing at 1G */ + err = serdes_init_niu_1g_serdes(np); + if (!err) { + np->flags &= ~NIU_FLAGS_10G; + np->mac_xcvr = MAC_XCVR_PCS; + } else { + dev_err(np->device, PFX "Port %u 10G/1G SERDES " + "Link Failed \n", np->port); + return -ENODEV; + } + } + return 0; +} + static int esr_read_rxtx_ctrl(struct niu *np, unsigned long chan, u32 *val) { int err; @@ -1954,13 +2171,23 @@ static const struct niu_phy_ops phy_ops_10g_serdes = { .link_status = link_status_10g_serdes, }; +static const struct niu_phy_ops phy_ops_10g_serdes_niu = { + .serdes_init = serdes_init_niu_10g_serdes, + .link_status = link_status_10g_serdes, +}; + +static const struct niu_phy_ops phy_ops_1g_serdes_niu = { + .serdes_init = serdes_init_niu_1g_serdes, + .link_status = link_status_1g_serdes, +}; + static const struct niu_phy_ops phy_ops_1g_rgmii = { .xcvr_init = xcvr_init_1g_rgmii, .link_status = link_status_1g_rgmii, }; static const struct niu_phy_ops phy_ops_10g_fiber_niu = { - .serdes_init = serdes_init_niu, + .serdes_init = serdes_init_niu_10g_fiber, .xcvr_init = xcvr_init_10g, .link_status = link_status_10g, }; @@ -1998,11 +2225,21 @@ struct niu_phy_template { u32 phy_addr_base; }; -static const struct niu_phy_template phy_template_niu = { +static const struct niu_phy_template phy_template_niu_10g_fiber = { .ops = &phy_ops_10g_fiber_niu, .phy_addr_base = 16, }; +static const struct niu_phy_template phy_template_niu_10g_serdes = { + .ops = &phy_ops_10g_serdes_niu, + .phy_addr_base = 0, +}; + +static const struct niu_phy_template phy_template_niu_1g_serdes = { + .ops = &phy_ops_1g_serdes_niu, + .phy_addr_base = 0, +}; + static const struct niu_phy_template phy_template_10g_fiber = { .ops = &phy_ops_10g_fiber, .phy_addr_base = 8, @@ -2182,8 +2419,25 @@ static int niu_determine_phy_disposition(struct niu *np) u32 phy_addr_off = 0; if (plat_type == PLAT_TYPE_NIU) { - tp = &phy_template_niu; - phy_addr_off += np->port; + switch (np->flags & + (NIU_FLAGS_10G | + NIU_FLAGS_FIBER | + NIU_FLAGS_XCVR_SERDES)) { + case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES: + /* 10G Serdes */ + tp = &phy_template_niu_10g_serdes; + break; + case NIU_FLAGS_XCVR_SERDES: + /* 1G Serdes */ + tp = &phy_template_niu_1g_serdes; + break; + case NIU_FLAGS_10G | NIU_FLAGS_FIBER: + /* 10G Fiber */ + default: + tp = &phy_template_niu_10g_fiber; + phy_addr_off += np->port; + break; + } } else { switch (np->flags & (NIU_FLAGS_10G | @@ -7213,6 +7467,12 @@ static int __devinit niu_phy_type_prop_decode(struct niu *np, np->flags |= NIU_FLAGS_10G; np->flags &= ~NIU_FLAGS_FIBER; np->mac_xcvr = MAC_XCVR_XPCS; + } else if (!strcmp(phy_prop, "xgsd") || !strcmp(phy_prop, "gsd")) { + /* 10G Serdes or 1G Serdes, default to 10G */ + np->flags |= NIU_FLAGS_10G; + np->flags &= ~NIU_FLAGS_FIBER; + np->flags |= NIU_FLAGS_XCVR_SERDES; + np->mac_xcvr = MAC_XCVR_XPCS; } else { return -EINVAL; } @@ -7741,6 +8001,8 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent) u32 val; int err; + num_10g = num_1g = 0; + if (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR) || !strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) { num_10g = 0; @@ -7757,6 +8019,16 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent) parent->num_ports = 2; val = (phy_encode(PORT_TYPE_10G, 0) | phy_encode(PORT_TYPE_10G, 1)); + } else if ((np->flags & NIU_FLAGS_XCVR_SERDES) && + (parent->plat_type == PLAT_TYPE_NIU)) { + /* this is the Monza case */ + if (np->flags & NIU_FLAGS_10G) { + val = (phy_encode(PORT_TYPE_10G, 0) | + phy_encode(PORT_TYPE_10G, 1)); + } else { + val = (phy_encode(PORT_TYPE_1G, 0) | + phy_encode(PORT_TYPE_1G, 1)); + } } else { err = fill_phy_probe_info(np, parent, info); if (err) @@ -8656,7 +8928,9 @@ static void __devinit niu_device_announce(struct niu *np) dev->name, (np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"), (np->flags & NIU_FLAGS_10G ? "10G" : "1G"), - (np->flags & NIU_FLAGS_FIBER ? "FIBER" : "COPPER"), + (np->flags & NIU_FLAGS_FIBER ? "FIBER" : + (np->flags & NIU_FLAGS_XCVR_SERDES ? "SERDES" : + "COPPER")), (np->mac_xcvr == MAC_XCVR_MII ? "MII" : (np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")), np->vpd.phy_type); diff --git a/drivers/net/niu.h b/drivers/net/niu.h index c6fa883daa2..180ca8ae93d 100644 --- a/drivers/net/niu.h +++ b/drivers/net/niu.h @@ -1048,6 +1048,13 @@ #define PLL_CFG_LD_SHIFT 8 #define PLL_CFG_MPY 0x0000001e #define PLL_CFG_MPY_SHIFT 1 +#define PLL_CFG_MPY_4X 0x0 +#define PLL_CFG_MPY_5X 0x00000002 +#define PLL_CFG_MPY_6X 0x00000004 +#define PLL_CFG_MPY_8X 0x00000008 +#define PLL_CFG_MPY_10X 0x0000000a +#define PLL_CFG_MPY_12X 0x0000000c +#define PLL_CFG_MPY_12P5X 0x0000000e #define PLL_CFG_ENPLL 0x00000001 #define ESR2_TI_PLL_STS_L (ESR2_BASE + 0x002) @@ -1093,6 +1100,9 @@ #define PLL_TX_CFG_INVPAIR 0x00000080 #define PLL_TX_CFG_RATE 0x00000060 #define PLL_TX_CFG_RATE_SHIFT 5 +#define PLL_TX_CFG_RATE_FULL 0x0 +#define PLL_TX_CFG_RATE_HALF 0x20 +#define PLL_TX_CFG_RATE_QUAD 0x40 #define PLL_TX_CFG_BUSWIDTH 0x0000001c #define PLL_TX_CFG_BUSWIDTH_SHIFT 2 #define PLL_TX_CFG_ENTEST 0x00000002 @@ -1132,6 +1142,9 @@ #define PLL_RX_CFG_INVPAIR 0x00000080 #define PLL_RX_CFG_RATE 0x00000060 #define PLL_RX_CFG_RATE_SHIFT 5 +#define PLL_RX_CFG_RATE_FULL 0x0 +#define PLL_RX_CFG_RATE_HALF 0x20 +#define PLL_RX_CFG_RATE_QUAD 0x40 #define PLL_RX_CFG_BUSWIDTH 0x0000001c #define PLL_RX_CFG_BUSWIDTH_SHIFT 2 #define PLL_RX_CFG_ENTEST 0x00000002 -- cgit v1.2.3-70-g09d2 From d8c3e23d06c1020f38b7b6290135a9522a2e3052 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 14 Nov 2008 14:47:29 -0800 Subject: niu: Bump driver version and release date. This driver is pretty mature, and the worst of the known problems has been fixed (the 32-bit failures due to readq implementation). So let's finally give it a version of 1.0 Signed-off-by: David S. Miller --- drivers/net/niu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index be6b4d7e2bb..1b6f548c441 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -33,8 +33,8 @@ #define DRV_MODULE_NAME "niu" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "0.9" -#define DRV_MODULE_RELDATE "May 4, 2008" +#define DRV_MODULE_VERSION "1.0" +#define DRV_MODULE_RELDATE "Nov 14, 2008" static char version[] __devinitdata = DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; -- cgit v1.2.3-70-g09d2 From 5421ae0153b4ba0469967cfd8de96144e3bf3979 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Fri, 14 Nov 2008 14:51:45 -0800 Subject: scm: fix scm_fp_list->list initialization made in wrong place This is the next page of the scm recursion story (the commit f8d570a4 net: Fix recursive descent in __scm_destroy()). In function scm_fp_dup(), the INIT_LIST_HEAD(&fpl->list) of newly created fpl is done *before* the subsequent memcpy from the old structure and thus the freshly initialized list is overwritten. But that's OK, since this initialization is not required at all, since the fpl->list is list_add-ed at the destruction time in any case (and is unused in other code), so I propose to drop both initializations, rather than moving it after the memcpy. Please, correct me if I miss something significant. Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller --- net/core/scm.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/core/scm.c b/net/core/scm.c index ab242cc1acc..b12303dd39d 100644 --- a/net/core/scm.c +++ b/net/core/scm.c @@ -75,7 +75,6 @@ static int scm_fp_copy(struct cmsghdr *cmsg, struct scm_fp_list **fplp) if (!fpl) return -ENOMEM; *fplp = fpl; - INIT_LIST_HEAD(&fpl->list); fpl->count = 0; } fpp = &fpl->fp[fpl->count]; @@ -301,7 +300,6 @@ struct scm_fp_list *scm_fp_dup(struct scm_fp_list *fpl) new_fpl = kmalloc(sizeof(*fpl), GFP_KERNEL); if (new_fpl) { - INIT_LIST_HEAD(&new_fpl->list); for (i=fpl->count-1; i>=0; i--) get_file(fpl->fp[i]); memcpy(new_fpl, fpl, sizeof(*fpl)); -- cgit v1.2.3-70-g09d2 From 18acfa2597d57c19249346d130fc3334244557b4 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 13 Nov 2008 21:26:27 +0300 Subject: net/ucc_geth: Fix oops in uec_get_ethtool_stats() p_{tx,rx}_fw_statistics_pram are special: they're available only when a device is open. If the device is closed, we should just fill the data with zeroes. Fixes the following oops: root@b1:~# ifconfig eth1 down root@b1:~# ethtool -S eth1 Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc01e1dcc Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01e1dcc] uec_get_ethtool_stats+0x98/0x124 LR [c0287cc8] ethtool_get_stats+0xfc/0x23c Call Trace: [cfaadde0] [c0287ca8] ethtool_get_stats+0xdc/0x23c (unreliable) [cfaade20] [c0288340] dev_ethtool+0x2fc/0x588 [cfaade50] [c0285648] dev_ioctl+0x290/0x33c [cfaadea0] [c0272238] sock_ioctl+0x80/0x2ec [cfaadec0] [c00b5ae4] vfs_ioctl+0x40/0xc0 [cfaadee0] [c00b5fa8] do_vfs_ioctl+0x78/0x20c [cfaadf10] [c00b617c] sys_ioctl+0x40/0x74 [cfaadf40] [c00142d8] ret_from_syscall+0x0/0x38 [...] ---[ end trace b941007b2dfb9759 ]--- Segmentation fault p.s. While at it, also remove u64 casts, they aren't needed. Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik --- drivers/net/ucc_geth_ethtool.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index 85f38a6b6a4..68a7f541413 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -323,17 +323,17 @@ static void uec_get_ethtool_stats(struct net_device *netdev, if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE) { base = (u32 __iomem *)&ugeth->ug_regs->tx64; for (i = 0; i < UEC_HW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = in_be32(&base[i]); } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX) { base = (u32 __iomem *)ugeth->p_tx_fw_statistics_pram; for (i = 0; i < UEC_TX_FW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = base ? in_be32(&base[i]) : 0; } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX) { base = (u32 __iomem *)ugeth->p_rx_fw_statistics_pram; for (i = 0; i < UEC_RX_FW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = base ? in_be32(&base[i]) : 0; } } -- cgit v1.2.3-70-g09d2 From 81183059e89c36f9b4c41f9332d642c2e0bff971 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 12 Nov 2008 10:07:11 -0600 Subject: gianfar: Fix DMA unmap invocations We weren't unmapping DMA memory, which will break when gianfar gets used on systems with more than 32-bits of memory. Also, it's just plain wrong. Signed-off-by: Andy Fleming Signed-off-by: Jeff Garzik --- drivers/net/gianfar.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 83a5cb6aa23..c4af949bf86 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1407,6 +1407,10 @@ static int gfar_clean_tx_ring(struct net_device *dev) if (bdp->status & TXBD_DEF) dev->stats.collisions++; + /* Unmap the DMA memory */ + dma_unmap_single(&priv->dev->dev, bdp->bufPtr, + bdp->length, DMA_TO_DEVICE); + /* Free the sk buffer associated with this TxBD */ dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]); @@ -1666,6 +1670,9 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) skb = priv->rx_skbuff[priv->skb_currx]; + dma_unmap_single(&priv->dev->dev, bdp->bufPtr, + priv->rx_buffer_size, DMA_FROM_DEVICE); + /* We drop the frame if we failed to allocate a new buffer */ if (unlikely(!newskb || !(bdp->status & RXBD_LAST) || bdp->status & RXBD_ERR)) { @@ -1674,14 +1681,8 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) if (unlikely(!newskb)) newskb = skb; - if (skb) { - dma_unmap_single(&priv->dev->dev, - bdp->bufPtr, - priv->rx_buffer_size, - DMA_FROM_DEVICE); - + if (skb) dev_kfree_skb_any(skb); - } } else { /* Increment the number of packets */ dev->stats.rx_packets++; -- cgit v1.2.3-70-g09d2 From 7ee0fddfe05f105d3346aa8774695e7130697836 Mon Sep 17 00:00:00 2001 From: "J. K. Cliburn" Date: Tue, 11 Nov 2008 16:21:48 -0600 Subject: atl1e: fix broken multicast by removing unnecessary crc inversion Inverting the crc after calling ether_crc_le() is unnecessary and breaks multicast. Remove it. Tested-by: David Madore Signed-off-by: Jay Cliburn Cc: stable@kernel.org Signed-off-by: Jeff Garzik --- drivers/net/atl1e/atl1e_hw.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c index 8cbc1b59bd6..4a770062011 100644 --- a/drivers/net/atl1e/atl1e_hw.c +++ b/drivers/net/atl1e/atl1e_hw.c @@ -163,9 +163,6 @@ int atl1e_read_mac_addr(struct atl1e_hw *hw) * atl1e_hash_mc_addr * purpose * set hash value for a multicast address - * hash calcu processing : - * 1. calcu 32bit CRC for multicast address - * 2. reverse crc with MSB to LSB */ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr) { @@ -174,7 +171,6 @@ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr) int i; crc32 = ether_crc_le(6, mc_addr); - crc32 = ~crc32; for (i = 0; i < 32; i++) value |= (((crc32 >> i) & 1) << (31 - i)); -- cgit v1.2.3-70-g09d2 From 3b259e365998291a02488225e32b9f2b73723b3e Mon Sep 17 00:00:00 2001 From: "J. K. Cliburn" Date: Sun, 9 Nov 2008 15:05:30 -0600 Subject: atl1: Do not enumerate options unsupported by chip Of the various WOL options provided in include/linux/ethtool.h, the L1 NIC supports only magic packet. Remove all options except magic packet from the atl1 driver. Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 246d92b4263..aef403d299e 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -3404,14 +3404,8 @@ static void atl1_get_wol(struct net_device *netdev, { struct atl1_adapter *adapter = netdev_priv(netdev); - wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; + wol->supported = WAKE_MAGIC; wol->wolopts = 0; - if (adapter->wol & ATLX_WUFC_EX) - wol->wolopts |= WAKE_UCAST; - if (adapter->wol & ATLX_WUFC_MC) - wol->wolopts |= WAKE_MCAST; - if (adapter->wol & ATLX_WUFC_BC) - wol->wolopts |= WAKE_BCAST; if (adapter->wol & ATLX_WUFC_MAG) wol->wolopts |= WAKE_MAGIC; return; @@ -3422,15 +3416,10 @@ static int atl1_set_wol(struct net_device *netdev, { struct atl1_adapter *adapter = netdev_priv(netdev); - if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | + WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; adapter->wol = 0; - if (wol->wolopts & WAKE_UCAST) - adapter->wol |= ATLX_WUFC_EX; - if (wol->wolopts & WAKE_MCAST) - adapter->wol |= ATLX_WUFC_MC; - if (wol->wolopts & WAKE_BCAST) - adapter->wol |= ATLX_WUFC_BC; if (wol->wolopts & WAKE_MAGIC) adapter->wol |= ATLX_WUFC_MAG; return 0; -- cgit v1.2.3-70-g09d2 From 3e44017b589f001941723dfdfede2ca6284dddce Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 9 Nov 2008 05:34:47 +0100 Subject: phylib: fix premature freeing of struct mii_bus Commit 46abc02175b3c246dd5141d878f565a8725060c9 ("phylib: give mdio buses a device tree presence") added a call to device_unregister() in a situation where the caller did not intend for the device to be freed yet, but apart from just unregistering the device from the system, device_unregister() does an additional put_device() that is intended to free it. The right function to use in this situation is device_del(), which unregisters the device from the system like device_unregister() does, but without dropping the reference count an additional time. Bug report from Bryan Wu . Signed-off-by: Lennert Buytenhek Tested-by: Bryan Wu Signed-off-by: Jeff Garzik --- drivers/net/phy/mdio_bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index d0ed1ef284a..536bda1f428 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -136,7 +136,7 @@ void mdiobus_unregister(struct mii_bus *bus) BUG_ON(bus->state != MDIOBUS_REGISTERED); bus->state = MDIOBUS_UNREGISTERED; - device_unregister(&bus->dev); + device_del(&bus->dev); for (i = 0; i < PHY_MAX_ADDR; i++) { if (bus->phy_map[i]) device_unregister(&bus->phy_map[i]->dev); -- cgit v1.2.3-70-g09d2 From e7ddee9037e7dd43de1ad08b51727e552aedd836 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 14 Nov 2008 13:44:38 -0500 Subject: cifs: disable sharing session and tcon and add new TCP sharing code The code that allows these structs to be shared is extremely racy. Disable the sharing of SMB and tcon structs for now until we can come up with a way to do this that's race free. We want to continue to share TCP sessions, however since they are required for multiuser mounts. For that, implement a new (hopefully race-free) scheme. Add a new global list of TCP sessions, and take care to get a reference to it whenever we're dealing with one. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_debug.c | 2 +- fs/cifs/cifsfs.c | 3 +- fs/cifs/cifsglob.h | 17 +++-- fs/cifs/cifsproto.h | 1 + fs/cifs/cifssmb.c | 18 ++--- fs/cifs/connect.c | 205 ++++++++++++++++++--------------------------------- 6 files changed, 96 insertions(+), 150 deletions(-) diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index ba8723d9599..40b5108fb4f 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -144,7 +144,7 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) seq_printf(m, "TCP status: %d\n\tLocal Users To " "Server: %d SecMode: 0x%x Req On Wire: %d", ses->server->tcpStatus, - atomic_read(&ses->server->socketUseCount), + ses->server->srv_count, ses->server->secMode, atomic_read(&ses->server->inFlight)); diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index af16a2406b1..2946dab0718 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1059,7 +1059,7 @@ init_cifs(void) { int rc = 0; cifs_proc_init(); - INIT_LIST_HEAD(&global_cifs_sock_list); + INIT_LIST_HEAD(&cifs_tcp_ses_list); INIT_LIST_HEAD(&GlobalSMBSessionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalTreeConnectionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalOplock_Q); @@ -1089,6 +1089,7 @@ init_cifs(void) GlobalMaxActiveXid = 0; memset(Local_System_Name, 0, 15); rwlock_init(&GlobalSMBSeslock); + rwlock_init(&cifs_tcp_ses_lock); spin_lock_init(&GlobalMid_Lock); if (cifs_max_pending < 2) { diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 13dc48414a7..313f7bfedec 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -123,6 +123,7 @@ struct cifs_cred { struct TCP_Server_Info { struct list_head tcp_ses_list; struct list_head smb_ses_list; + int srv_count; /* reference counter */ /* 15 character server name + 0x20 16th byte indicating type = srv */ char server_RFC1001_name[SERVER_NAME_LEN_WITH_NULL]; char unicode_server_Name[SERVER_NAME_LEN_WITH_NULL * 2]; @@ -144,7 +145,6 @@ struct TCP_Server_Info { bool svlocal:1; /* local server or remote */ bool noblocksnd; /* use blocking sendmsg */ bool noautotune; /* do not autotune send buf sizes */ - atomic_t socketUseCount; /* number of open cifs sessions on socket */ atomic_t inFlight; /* number of requests on the wire to server */ #ifdef CONFIG_CIFS_STATS2 atomic_t inSend; /* requests trying to send */ @@ -591,13 +591,18 @@ require use of the stronger protocol */ #define GLOBAL_EXTERN extern #endif - -/* the list of TCP_Server_Info structures, ie each of the sockets +/* + * the list of TCP_Server_Info structures, ie each of the sockets * connecting our client to a distinct server (ip address), is - * chained together by global_cifs_sock_list. The list of all our SMB + * chained together by cifs_tcp_ses_list. The list of all our SMB * sessions (and from that the tree connections) can be found - * by iterating over global_cifs_sock_list */ -GLOBAL_EXTERN struct list_head global_cifs_sock_list; + * by iterating over cifs_tcp_ses_list + */ +GLOBAL_EXTERN struct list_head cifs_tcp_ses_list; + +/* protects cifs_tcp_ses_list and srv_count for each tcp session */ +GLOBAL_EXTERN rwlock_t cifs_tcp_ses_lock; + GLOBAL_EXTERN struct list_head GlobalSMBSessionList; /* BB to be removed by jl*/ GLOBAL_EXTERN struct list_head GlobalTreeConnectionList; /* BB to be removed */ GLOBAL_EXTERN rwlock_t GlobalSMBSeslock; /* protects list inserts on 3 above */ diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 6f21ecb85ce..0250a994c6e 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -102,6 +102,7 @@ extern void acl_to_uid_mode(struct inode *inode, const char *path, const __u16 *pfid); extern int mode_to_acl(struct inode *inode, const char *path, __u64); +extern void cifs_put_tcp_session(struct TCP_Server_Info *server); extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *, const char *); extern int cifs_umount(struct super_block *, struct cifs_sb_info *); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 7f0651b6957..cd9e9a145e4 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -664,8 +664,9 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses) rc = -EIO; goto neg_err_exit; } - - if (server->socketUseCount.counter > 1) { + read_lock(&cifs_tcp_ses_lock); + if (server->srv_count > 1) { + read_unlock(&cifs_tcp_ses_lock); if (memcmp(server->server_GUID, pSMBr->u.extended_response. GUID, 16) != 0) { @@ -674,9 +675,11 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses) pSMBr->u.extended_response.GUID, 16); } - } else + } else { + read_unlock(&cifs_tcp_ses_lock); memcpy(server->server_GUID, pSMBr->u.extended_response.GUID, 16); + } if (count == 16) { server->secType = RawNTLMSSP; @@ -830,12 +833,9 @@ CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses) pSMB->AndXCommand = 0xFF; rc = SendReceiveNoRsp(xid, ses, (struct smb_hdr *) pSMB, 0); session_already_dead: - atomic_dec(&ses->server->socketUseCount); - if (atomic_read(&ses->server->socketUseCount) == 0) { - spin_lock(&GlobalMid_Lock); - ses->server->tcpStatus = CifsExiting; - spin_unlock(&GlobalMid_Lock); - rc = -ESHUTDOWN; + if (ses->server) { + cifs_put_tcp_session(ses->server); + rc = 0; } up(&ses->sesSem); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 30ab8dc68e1..a0314259f94 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -659,6 +659,11 @@ multi_t2_fnd: } } /* end while !EXITING */ + /* take it off the list, if it's not already */ + write_lock(&cifs_tcp_ses_lock); + list_del_init(&server->tcp_ses_list); + write_unlock(&cifs_tcp_ses_lock); + spin_lock(&GlobalMid_Lock); server->tcpStatus = CifsExiting; spin_unlock(&GlobalMid_Lock); @@ -1357,92 +1362,66 @@ cifs_parse_mount_options(char *options, const char *devname, return 0; } -static struct cifsSesInfo * -cifs_find_tcp_session(struct in_addr *target_ip_addr, - struct in6_addr *target_ip6_addr, - char *userName, struct TCP_Server_Info **psrvTcp) +static struct TCP_Server_Info * +cifs_find_tcp_session(struct sockaddr *addr) { struct list_head *tmp; - struct cifsSesInfo *ses; - - *psrvTcp = NULL; - - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalSMBSessionList) { - ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList); - if (!ses->server) + struct TCP_Server_Info *server; + struct sockaddr_in *addr4 = (struct sockaddr_in *) addr; + struct sockaddr_in6 *addr6 = (struct sockaddr_in6 *) addr; + + write_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &cifs_tcp_ses_list) { + server = list_entry(tmp, struct TCP_Server_Info, + tcp_ses_list); + + /* + * the demux thread can exit on its own while still in CifsNew + * so don't accept any sockets in that state. Since the + * tcpStatus never changes back to CifsNew it's safe to check + * for this without a lock. + */ + if (server->tcpStatus == CifsNew) continue; - if (target_ip_addr && - ses->server->addr.sockAddr.sin_addr.s_addr != target_ip_addr->s_addr) - continue; - else if (target_ip6_addr && - memcmp(&ses->server->addr.sockAddr6.sin6_addr, - target_ip6_addr, sizeof(*target_ip6_addr))) - continue; - /* BB lock server and tcp session; increment use count here?? */ - - /* found a match on the TCP session */ - *psrvTcp = ses->server; + if (addr->sa_family == AF_INET && + (addr4->sin_addr.s_addr != + server->addr.sockAddr.sin_addr.s_addr)) + continue; + else if (addr->sa_family == AF_INET6 && + memcmp(&server->addr.sockAddr6.sin6_addr, + &addr6->sin6_addr, sizeof(addr6->sin6_addr))) + continue; - /* BB check if reconnection needed */ - if (strncmp(ses->userName, userName, MAX_USERNAME_SIZE) == 0) { - read_unlock(&GlobalSMBSeslock); - /* Found exact match on both TCP and - SMB sessions */ - return ses; - } - /* else tcp and smb sessions need reconnection */ + ++server->srv_count; + write_unlock(&cifs_tcp_ses_lock); + return server; } - read_unlock(&GlobalSMBSeslock); - + write_unlock(&cifs_tcp_ses_lock); return NULL; } -static struct cifsTconInfo * -find_unc(__be32 new_target_ip_addr, char *uncName, char *userName) +void +cifs_put_tcp_session(struct TCP_Server_Info *server) { - struct list_head *tmp; - struct cifsTconInfo *tcon; - __be32 old_ip; - - read_lock(&GlobalSMBSeslock); - - list_for_each(tmp, &GlobalTreeConnectionList) { - cFYI(1, ("Next tcon")); - tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); - if (!tcon->ses || !tcon->ses->server) - continue; - - old_ip = tcon->ses->server->addr.sockAddr.sin_addr.s_addr; - cFYI(1, ("old ip addr: %x == new ip %x ?", - old_ip, new_target_ip_addr)); - - if (old_ip != new_target_ip_addr) - continue; - - /* BB lock tcon, server, tcp session and increment use count? */ - /* found a match on the TCP session */ - /* BB check if reconnection needed */ - cFYI(1, ("IP match, old UNC: %s new: %s", - tcon->treeName, uncName)); + struct task_struct *task; - if (strncmp(tcon->treeName, uncName, MAX_TREE_SIZE)) - continue; + write_lock(&cifs_tcp_ses_lock); + if (--server->srv_count > 0) { + write_unlock(&cifs_tcp_ses_lock); + return; + } - cFYI(1, ("and old usr: %s new: %s", - tcon->treeName, uncName)); + list_del_init(&server->tcp_ses_list); + write_unlock(&cifs_tcp_ses_lock); - if (strncmp(tcon->ses->userName, userName, MAX_USERNAME_SIZE)) - continue; - - /* matched smb session (user name) */ - read_unlock(&GlobalSMBSeslock); - return tcon; - } + spin_lock(&GlobalMid_Lock); + server->tcpStatus = CifsExiting; + spin_unlock(&GlobalMid_Lock); - read_unlock(&GlobalSMBSeslock); - return NULL; + task = xchg(&server->tsk, NULL); + if (task) + force_sig(SIGKILL, task); } int @@ -1881,16 +1860,6 @@ convert_delimiter(char *path, char delim) } } -static void -kill_cifsd(struct TCP_Server_Info *server) -{ - struct task_struct *task; - - task = xchg(&server->tsk, NULL); - if (task) - force_sig(SIGKILL, task); -} - static void setup_cifs_sb(struct smb_vol *pvolume_info, struct cifs_sb_info *cifs_sb) { @@ -2069,21 +2038,10 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } } - if (addr.sa_family == AF_INET) - existingCifsSes = cifs_find_tcp_session(&sin_server->sin_addr, - NULL /* no ipv6 addr */, - volume_info.username, &srvTcp); - else if (addr.sa_family == AF_INET6) { - cFYI(1, ("looking for ipv6 address")); - existingCifsSes = cifs_find_tcp_session(NULL /* no ipv4 addr */, - &sin_server6->sin6_addr, - volume_info.username, &srvTcp); - } else { - rc = -EINVAL; - goto out; - } - - if (!srvTcp) { + srvTcp = cifs_find_tcp_session(&addr); + if (srvTcp) { + cFYI(1, ("Existing tcp session with server found")); + } else { /* create socket */ if (addr.sa_family == AF_INET6) { cFYI(1, ("attempting ipv6 connect")); /* BB should we allow ipv6 on port 139? */ @@ -2153,6 +2111,12 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, memcpy(srvTcp->server_RFC1001_name, volume_info.target_rfc1001_name, 16); srvTcp->sequence_number = 0; + INIT_LIST_HEAD(&srvTcp->tcp_ses_list); + ++srvTcp->srv_count; + write_lock(&cifs_tcp_ses_lock); + list_add(&srvTcp->tcp_ses_list, + &cifs_tcp_ses_list); + write_unlock(&cifs_tcp_ses_lock); } } @@ -2204,8 +2168,6 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, rc = cifs_setup_session(xid, pSesInfo, cifs_sb->local_nls); up(&pSesInfo->sesSem); - if (!rc) - atomic_inc(&srvTcp->socketUseCount); } } @@ -2213,9 +2175,6 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (!rc) { setup_cifs_sb(&volume_info, cifs_sb); - tcon = - find_unc(sin_server->sin_addr.s_addr, volume_info.UNC, - volume_info.username); if (tcon) { cFYI(1, ("Found match on UNC path")); if (tcon->seal != volume_info.seal) @@ -2278,35 +2237,21 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, /* on error free sesinfo and tcon struct if needed */ mount_fail_check: if (rc) { - /* if session setup failed, use count is zero but - we still need to free cifsd thread */ - if (atomic_read(&srvTcp->socketUseCount) == 0) { - spin_lock(&GlobalMid_Lock); - srvTcp->tcpStatus = CifsExiting; - spin_unlock(&GlobalMid_Lock); - kill_cifsd(srvTcp); - } - /* If find_unc succeeded then rc == 0 so we can not end */ - if (tcon) /* up accidently freeing someone elses tcon struct */ + /* If find_unc succeeded then rc == 0 so we can not end */ + /* up accidently freeing someone elses tcon struct */ + if (tcon) tconInfoFree(tcon); + if (existingCifsSes == NULL) { if (pSesInfo) { if ((pSesInfo->server) && - (pSesInfo->status == CifsGood)) { - int temp_rc; - temp_rc = CIFSSMBLogoff(xid, pSesInfo); - /* if the socketUseCount is now zero */ - if ((temp_rc == -ESHUTDOWN) && - (pSesInfo->server)) - kill_cifsd(pSesInfo->server); - } else { + (pSesInfo->status == CifsGood)) + CIFSSMBLogoff(xid, pSesInfo); + else { cFYI(1, ("No session or bad tcon")); - if (pSesInfo->server) { - spin_lock(&GlobalMid_Lock); - srvTcp->tcpStatus = CifsExiting; - spin_unlock(&GlobalMid_Lock); - kill_cifsd(pSesInfo->server); - } + if (pSesInfo->server) + cifs_put_tcp_session( + pSesInfo->server); } sesInfoFree(pSesInfo); /* pSesInfo = NULL; */ @@ -3613,13 +3558,7 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) if (rc == -EBUSY) { FreeXid(xid); return 0; - } else if (rc == -ESHUTDOWN) { - cFYI(1, ("Waking up socket by sending signal")); - if (ses->server) - kill_cifsd(ses->server); - rc = 0; - } /* else - we have an smb session - left on this socket do not kill cifsd */ + } } else cFYI(1, ("No session or bad tcon")); } -- cgit v1.2.3-70-g09d2 From 6a6b97d360702b98c02c7fca4c4e088dcf3a2985 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 13 Nov 2008 10:04:46 +0900 Subject: libata: improve phantom device detection Currently libata uses four methods to detect device presence. 1. PHY status if available. 2. TF register R/W test (only promotes presence, never demotes) 3. device signature after reset 4. IDENTIFY failure detection in SFF state machine Combination of the above works well in most cases but recently there have been a few reports where a phantom device causes unnecessary delay during probe. In both cases, PHY status wasn't available. In one case, it passed #2 and #3 and failed IDENTIFY with ATA_ERR which didn't qualify as #4. The other failed #2 but as it passed #3 and #4, it still caused failure. In both cases, phantom device reported diagnostic failure, so these cases can be safely worked around by considering any !ATA_DRQ IDENTIFY failure as NODEV_HINT if diagnostic failure is set. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 4b473948632..9033d164c4e 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1227,10 +1227,19 @@ fsm_start: /* ATA PIO protocol */ if (unlikely((status & ATA_DRQ) == 0)) { /* handle BSY=0, DRQ=0 as error */ - if (likely(status & (ATA_ERR | ATA_DF))) + if (likely(status & (ATA_ERR | ATA_DF))) { /* device stops HSM for abort/error */ qc->err_mask |= AC_ERR_DEV; - else { + + /* If diagnostic failed and this is + * IDENTIFY, it's likely a phantom + * device. Mark hint. + */ + if (qc->dev->horkage & + ATA_HORKAGE_DIAGNOSTIC) + qc->err_mask |= + AC_ERR_NODEV_HINT; + } else { /* HSM violation. Let EH handle this. * Phantom devices also trigger this * condition. Mark hint. -- cgit v1.2.3-70-g09d2 From 14fbf50d695207754daeb96270b3027a3821121f Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 14 Nov 2008 13:53:46 -0500 Subject: cifs: reinstate sharing of SMB sessions sans races We do this by abandoning the global list of SMB sessions and instead moving to a per-server list. This entails adding a new list head to the TCP_Server_Info struct. The refcounting for the cifsSesInfo is moved to a non-atomic variable. We have to protect it by a lock anyway, so there's no benefit to making it an atomic. The list and refcount are protected by the global cifs_tcp_ses_lock. The patch also adds a new routines to find and put SMB sessions and that properly take and put references under the lock. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_debug.c | 53 ++++++------ fs/cifs/cifsfs.c | 17 ++-- fs/cifs/cifsglob.h | 6 +- fs/cifs/cifsproto.h | 1 - fs/cifs/cifssmb.c | 22 ++--- fs/cifs/connect.c | 226 ++++++++++++++++++++++++++++----------------------- fs/cifs/misc.c | 16 ++-- 7 files changed, 175 insertions(+), 166 deletions(-) diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 40b5108fb4f..59841a68b0b 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -107,9 +107,9 @@ void cifs_dump_mids(struct TCP_Server_Info *server) #ifdef CONFIG_PROC_FS static int cifs_debug_data_proc_show(struct seq_file *m, void *v) { - struct list_head *tmp; - struct list_head *tmp1; + struct list_head *tmp, *tmp2, *tmp3; struct mid_q_entry *mid_entry; + struct TCP_Server_Info *server; struct cifsSesInfo *ses; struct cifsTconInfo *tcon; int i; @@ -122,43 +122,45 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) seq_printf(m, "Servers:"); i = 0; - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalSMBSessionList) { + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &cifs_tcp_ses_list) { + server = list_entry(tmp, struct TCP_Server_Info, + tcp_ses_list); i++; - ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList); - if ((ses->serverDomain == NULL) || (ses->serverOS == NULL) || - (ses->serverNOS == NULL)) { - seq_printf(m, "\nentry for %s not fully " - "displayed\n\t", ses->serverName); - } else { - seq_printf(m, + list_for_each(tmp2, &server->smb_ses_list) { + ses = list_entry(tmp2, struct cifsSesInfo, + smb_ses_list); + if ((ses->serverDomain == NULL) || + (ses->serverOS == NULL) || + (ses->serverNOS == NULL)) { + seq_printf(m, "\nentry for %s not fully " + "displayed\n\t", ses->serverName); + } else { + seq_printf(m, "\n%d) Name: %s Domain: %s Mounts: %d OS:" " %s \n\tNOS: %s\tCapability: 0x%x\n\tSMB" " session status: %d\t", i, ses->serverName, ses->serverDomain, - atomic_read(&ses->inUse), - ses->serverOS, ses->serverNOS, + ses->ses_count, ses->serverOS, ses->serverNOS, ses->capabilities, ses->status); - } - if (ses->server) { + } seq_printf(m, "TCP status: %d\n\tLocal Users To " - "Server: %d SecMode: 0x%x Req On Wire: %d", - ses->server->tcpStatus, - ses->server->srv_count, - ses->server->secMode, - atomic_read(&ses->server->inFlight)); + "Server: %d SecMode: 0x%x Req On Wire: %d", + server->tcpStatus, server->srv_count, + server->secMode, + atomic_read(&server->inFlight)); #ifdef CONFIG_CIFS_STATS2 seq_printf(m, " In Send: %d In MaxReq Wait: %d", - atomic_read(&ses->server->inSend), - atomic_read(&ses->server->num_waiters)); + atomic_read(&server->inSend), + atomic_read(&server->num_waiters)); #endif seq_puts(m, "\nMIDs:\n"); spin_lock(&GlobalMid_Lock); - list_for_each(tmp1, &ses->server->pending_mid_q) { - mid_entry = list_entry(tmp1, struct + list_for_each(tmp3, &server->pending_mid_q) { + mid_entry = list_entry(tmp3, struct mid_q_entry, qhead); seq_printf(m, "State: %d com: %d pid:" @@ -171,9 +173,8 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) } spin_unlock(&GlobalMid_Lock); } - } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); seq_putc(m, '\n'); seq_puts(m, "Shares:"); diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 2946dab0718..a1e96620b09 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1031,24 +1031,24 @@ static int cifs_oplock_thread(void *dummyarg) static int cifs_dnotify_thread(void *dummyarg) { struct list_head *tmp; - struct cifsSesInfo *ses; + struct TCP_Server_Info *server; do { if (try_to_freeze()) continue; set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(15*HZ); - read_lock(&GlobalSMBSeslock); /* check if any stuck requests that need to be woken up and wakeq so the thread can wake up and error out */ - list_for_each(tmp, &GlobalSMBSessionList) { - ses = list_entry(tmp, struct cifsSesInfo, - cifsSessionList); - if (ses->server && atomic_read(&ses->server->inFlight)) - wake_up_all(&ses->server->response_q); + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &cifs_tcp_ses_list) { + server = list_entry(tmp, struct TCP_Server_Info, + tcp_ses_list); + if (atomic_read(&server->inFlight)) + wake_up_all(&server->response_q); } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); } while (!kthread_should_stop()); return 0; @@ -1060,7 +1060,6 @@ init_cifs(void) int rc = 0; cifs_proc_init(); INIT_LIST_HEAD(&cifs_tcp_ses_list); - INIT_LIST_HEAD(&GlobalSMBSessionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalTreeConnectionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalOplock_Q); #ifdef CONFIG_CIFS_EXPERIMENTAL diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 313f7bfedec..631a99f72f2 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -195,14 +195,14 @@ struct cifsUidInfo { * Session structure. One of these for each uid session with a particular host */ struct cifsSesInfo { - struct list_head cifsSessionList; + struct list_head smb_ses_list; struct list_head tcon_list; struct semaphore sesSem; #if 0 struct cifsUidInfo *uidInfo; /* pointer to user info */ #endif struct TCP_Server_Info *server; /* pointer to server info */ - atomic_t inUse; /* # of mounts (tree connections) on this ses */ + int ses_count; /* reference counter */ enum statusEnum status; unsigned overrideSecFlg; /* if non-zero override global sec flags */ __u16 ipc_tid; /* special tid for connection to IPC share */ @@ -602,8 +602,6 @@ GLOBAL_EXTERN struct list_head cifs_tcp_ses_list; /* protects cifs_tcp_ses_list and srv_count for each tcp session */ GLOBAL_EXTERN rwlock_t cifs_tcp_ses_lock; - -GLOBAL_EXTERN struct list_head GlobalSMBSessionList; /* BB to be removed by jl*/ GLOBAL_EXTERN struct list_head GlobalTreeConnectionList; /* BB to be removed */ GLOBAL_EXTERN rwlock_t GlobalSMBSeslock; /* protects list inserts on 3 above */ diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 0250a994c6e..6f21ecb85ce 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -102,7 +102,6 @@ extern void acl_to_uid_mode(struct inode *inode, const char *path, const __u16 *pfid); extern int mode_to_acl(struct inode *inode, const char *path, __u64); -extern void cifs_put_tcp_session(struct TCP_Server_Info *server); extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *, const char *); extern int cifs_umount(struct super_block *, struct cifs_sb_info *); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index cd9e9a145e4..9c95617baa4 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -799,20 +799,16 @@ CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses) int rc = 0; cFYI(1, ("In SMBLogoff for session disconnect")); - if (ses) - down(&ses->sesSem); - else - return -EIO; - - atomic_dec(&ses->inUse); - if (atomic_read(&ses->inUse) > 0) { - up(&ses->sesSem); - return -EBUSY; - } - if (ses->server == NULL) + /* + * BB: do we need to check validity of ses and server? They should + * always be valid since we have an active reference. If not, that + * should probably be a BUG() + */ + if (!ses || !ses->server) return -EIO; + down(&ses->sesSem); if (ses->need_reconnect) goto session_already_dead; /* no need to send SMBlogoff if uid already closed due to reconnect */ @@ -833,10 +829,6 @@ CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses) pSMB->AndXCommand = 0xFF; rc = SendReceiveNoRsp(xid, ses, (struct smb_hdr *) pSMB, 0); session_already_dead: - if (ses->server) { - cifs_put_tcp_session(ses->server); - rc = 0; - } up(&ses->sesSem); /* if session dead then we do not need to do ulogoff, diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index a0314259f94..44130e052e0 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -144,23 +144,18 @@ cifs_reconnect(struct TCP_Server_Info *server) /* before reconnecting the tcp session, mark the smb session (uid) and the tid bad so they are not used until reconnected */ - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalSMBSessionList) { - ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList); - if (ses->server) { - if (ses->server == server) { - ses->need_reconnect = true; - ses->ipc_tid = 0; - } - } - /* else tcp and smb sessions need reconnection */ + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &server->smb_ses_list) { + ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); + ses->need_reconnect = true; + ses->ipc_tid = 0; } + read_unlock(&cifs_tcp_ses_lock); list_for_each(tmp, &GlobalTreeConnectionList) { tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); if ((tcon->ses) && (tcon->ses->server == server)) tcon->need_reconnect = true; } - read_unlock(&GlobalSMBSeslock); /* do not want to be sending data on a socket we are freeing */ down(&server->tcpSem); if (server->ssocket) { @@ -696,29 +691,29 @@ multi_t2_fnd: if (smallbuf) /* no sense logging a debug message if NULL */ cifs_small_buf_release(smallbuf); - read_lock(&GlobalSMBSeslock); + /* + * BB: we shouldn't have to do any of this. It shouldn't be + * possible to exit from the thread with active SMB sessions + */ + read_lock(&cifs_tcp_ses_lock); if (list_empty(&server->pending_mid_q)) { /* loop through server session structures attached to this and mark them dead */ - list_for_each(tmp, &GlobalSMBSessionList) { - ses = - list_entry(tmp, struct cifsSesInfo, - cifsSessionList); - if (ses->server == server) { - ses->status = CifsExiting; - ses->server = NULL; - } + list_for_each(tmp, &server->smb_ses_list) { + ses = list_entry(tmp, struct cifsSesInfo, + smb_ses_list); + ses->status = CifsExiting; + ses->server = NULL; } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); } else { /* although we can not zero the server struct pointer yet, since there are active requests which may depnd on them, mark the corresponding SMB sessions as exiting too */ - list_for_each(tmp, &GlobalSMBSessionList) { + list_for_each(tmp, &server->smb_ses_list) { ses = list_entry(tmp, struct cifsSesInfo, - cifsSessionList); - if (ses->server == server) - ses->status = CifsExiting; + smb_ses_list); + ses->status = CifsExiting; } spin_lock(&GlobalMid_Lock); @@ -733,7 +728,7 @@ multi_t2_fnd: } } spin_unlock(&GlobalMid_Lock); - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); /* 1/8th of sec is more than enough time for them to exit */ msleep(125); } @@ -755,14 +750,13 @@ multi_t2_fnd: if there are any pointing to this (e.g if a crazy root user tried to kill cifsd kernel thread explicitly this might happen) */ - write_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalSMBSessionList) { - ses = list_entry(tmp, struct cifsSesInfo, - cifsSessionList); - if (ses->server == server) - ses->server = NULL; + /* BB: This shouldn't be necessary, see above */ + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &server->smb_ses_list) { + ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); + ses->server = NULL; } - write_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); kfree(server->hostname); task_to_wake = xchg(&server->tsk, NULL); @@ -1401,7 +1395,7 @@ cifs_find_tcp_session(struct sockaddr *addr) return NULL; } -void +static void cifs_put_tcp_session(struct TCP_Server_Info *server) { struct task_struct *task; @@ -1424,6 +1418,50 @@ cifs_put_tcp_session(struct TCP_Server_Info *server) force_sig(SIGKILL, task); } +static struct cifsSesInfo * +cifs_find_smb_ses(struct TCP_Server_Info *server, char *username) +{ + struct list_head *tmp; + struct cifsSesInfo *ses; + + write_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &server->smb_ses_list) { + ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); + if (strncmp(ses->userName, username, MAX_USERNAME_SIZE)) + continue; + + ++ses->ses_count; + write_unlock(&cifs_tcp_ses_lock); + return ses; + } + write_unlock(&cifs_tcp_ses_lock); + return NULL; +} + +static void +cifs_put_smb_ses(struct cifsSesInfo *ses) +{ + int xid; + struct TCP_Server_Info *server = ses->server; + + write_lock(&cifs_tcp_ses_lock); + if (--ses->ses_count > 0) { + write_unlock(&cifs_tcp_ses_lock); + return; + } + + list_del_init(&ses->smb_ses_list); + write_unlock(&cifs_tcp_ses_lock); + + if (ses->status == CifsGood) { + xid = GetXid(); + CIFSSMBLogoff(xid, ses); + _FreeXid(xid); + } + sesInfoFree(ses); + cifs_put_tcp_session(server); +} + int get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, const char *old_path, const struct nls_table *nls_codepage, unsigned int *pnum_referrals, @@ -1958,7 +1996,6 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, struct sockaddr_in6 *sin_server6 = (struct sockaddr_in6 *) &addr; struct smb_vol volume_info; struct cifsSesInfo *pSesInfo = NULL; - struct cifsSesInfo *existingCifsSes = NULL; struct cifsTconInfo *tcon = NULL; struct TCP_Server_Info *srvTcp = NULL; @@ -2112,6 +2149,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, volume_info.target_rfc1001_name, 16); srvTcp->sequence_number = 0; INIT_LIST_HEAD(&srvTcp->tcp_ses_list); + INIT_LIST_HEAD(&srvTcp->smb_ses_list); ++srvTcp->srv_count; write_lock(&cifs_tcp_ses_lock); list_add(&srvTcp->tcp_ses_list, @@ -2120,10 +2158,16 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } } - if (existingCifsSes) { - pSesInfo = existingCifsSes; + pSesInfo = cifs_find_smb_ses(srvTcp, volume_info.username); + if (pSesInfo) { cFYI(1, ("Existing smb sess found (status=%d)", pSesInfo->status)); + /* + * The existing SMB session already has a reference to srvTcp, + * so we can put back the extra one we got before + */ + cifs_put_tcp_session(srvTcp); + down(&pSesInfo->sesSem); if (pSesInfo->need_reconnect) { cFYI(1, ("Session needs reconnect")); @@ -2134,41 +2178,44 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } else if (!rc) { cFYI(1, ("Existing smb sess not found")); pSesInfo = sesInfoAlloc(); - if (pSesInfo == NULL) + if (pSesInfo == NULL) { rc = -ENOMEM; - else { - pSesInfo->server = srvTcp; - sprintf(pSesInfo->serverName, "%u.%u.%u.%u", - NIPQUAD(sin_server->sin_addr.s_addr)); + goto mount_fail_check; } - if (!rc) { - /* volume_info.password freed at unmount */ - if (volume_info.password) { - pSesInfo->password = volume_info.password; - /* set to NULL to prevent freeing on exit */ - volume_info.password = NULL; - } - if (volume_info.username) - strncpy(pSesInfo->userName, - volume_info.username, - MAX_USERNAME_SIZE); - if (volume_info.domainname) { - int len = strlen(volume_info.domainname); - pSesInfo->domainName = - kmalloc(len + 1, GFP_KERNEL); - if (pSesInfo->domainName) - strcpy(pSesInfo->domainName, - volume_info.domainname); - } - pSesInfo->linux_uid = volume_info.linux_uid; - pSesInfo->overrideSecFlg = volume_info.secFlg; - down(&pSesInfo->sesSem); - /* BB FIXME need to pass vol->secFlgs BB */ - rc = cifs_setup_session(xid, pSesInfo, - cifs_sb->local_nls); - up(&pSesInfo->sesSem); - } + /* new SMB session uses our srvTcp ref */ + pSesInfo->server = srvTcp; + sprintf(pSesInfo->serverName, "%u.%u.%u.%u", + NIPQUAD(sin_server->sin_addr.s_addr)); + + write_lock(&cifs_tcp_ses_lock); + list_add(&pSesInfo->smb_ses_list, &srvTcp->smb_ses_list); + write_unlock(&cifs_tcp_ses_lock); + + /* volume_info.password freed at unmount */ + if (volume_info.password) { + pSesInfo->password = volume_info.password; + /* set to NULL to prevent freeing on exit */ + volume_info.password = NULL; + } + if (volume_info.username) + strncpy(pSesInfo->userName, volume_info.username, + MAX_USERNAME_SIZE); + if (volume_info.domainname) { + int len = strlen(volume_info.domainname); + pSesInfo->domainName = kmalloc(len + 1, GFP_KERNEL); + if (pSesInfo->domainName) + strcpy(pSesInfo->domainName, + volume_info.domainname); + } + pSesInfo->linux_uid = volume_info.linux_uid; + pSesInfo->overrideSecFlg = volume_info.secFlg; + down(&pSesInfo->sesSem); + + /* BB FIXME need to pass vol->secFlgs BB */ + rc = cifs_setup_session(xid, pSesInfo, + cifs_sb->local_nls); + up(&pSesInfo->sesSem); } /* search for existing tcon to this server share */ @@ -2209,11 +2256,9 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, tcon->Flags)); } } - if (!rc) { - atomic_inc(&pSesInfo->inUse); - tcon->seal = volume_info.seal; - } else + if (rc) goto mount_fail_check; + tcon->seal = volume_info.seal; } /* we can have only one retry value for a connection @@ -2234,29 +2279,19 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, /* BB FIXME fix time_gran to be larger for LANMAN sessions */ sb->s_time_gran = 100; -/* on error free sesinfo and tcon struct if needed */ mount_fail_check: + /* on error free sesinfo and tcon struct if needed */ if (rc) { /* If find_unc succeeded then rc == 0 so we can not end */ /* up accidently freeing someone elses tcon struct */ if (tcon) tconInfoFree(tcon); - if (existingCifsSes == NULL) { - if (pSesInfo) { - if ((pSesInfo->server) && - (pSesInfo->status == CifsGood)) - CIFSSMBLogoff(xid, pSesInfo); - else { - cFYI(1, ("No session or bad tcon")); - if (pSesInfo->server) - cifs_put_tcp_session( - pSesInfo->server); - } - sesInfoFree(pSesInfo); - /* pSesInfo = NULL; */ - } - } + /* should also end up putting our tcp session ref if needed */ + if (pSesInfo) + cifs_put_smb_ses(pSesInfo); + else + cifs_put_tcp_session(srvTcp); } else { atomic_inc(&tcon->useCount); cifs_sb->tcon = tcon; @@ -3551,16 +3586,7 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) } DeleteTconOplockQEntries(cifs_sb->tcon); tconInfoFree(cifs_sb->tcon); - if ((ses) && (ses->server)) { - /* save off task so we do not refer to ses later */ - cFYI(1, ("About to do SMBLogoff ")); - rc = CIFSSMBLogoff(xid, ses); - if (rc == -EBUSY) { - FreeXid(xid); - return 0; - } - } else - cFYI(1, ("No session or bad tcon")); + cifs_put_smb_ses(ses); } cifs_sb->tcon = NULL; @@ -3568,8 +3594,6 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) cifs_sb->prepathlen = 0; cifs_sb->prepath = NULL; kfree(tmp); - if (ses) - sesInfoFree(ses); FreeXid(xid); return rc; diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 88786ba02d2..46c8c7baccb 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -75,12 +75,11 @@ sesInfoAlloc(void) ret_buf = kzalloc(sizeof(struct cifsSesInfo), GFP_KERNEL); if (ret_buf) { - write_lock(&GlobalSMBSeslock); atomic_inc(&sesInfoAllocCount); ret_buf->status = CifsNew; - list_add(&ret_buf->cifsSessionList, &GlobalSMBSessionList); + ++ret_buf->ses_count; + INIT_LIST_HEAD(&ret_buf->smb_ses_list); init_MUTEX(&ret_buf->sesSem); - write_unlock(&GlobalSMBSeslock); } return ret_buf; } @@ -93,10 +92,7 @@ sesInfoFree(struct cifsSesInfo *buf_to_free) return; } - write_lock(&GlobalSMBSeslock); atomic_dec(&sesInfoAllocCount); - list_del(&buf_to_free->cifsSessionList); - write_unlock(&GlobalSMBSeslock); kfree(buf_to_free->serverOS); kfree(buf_to_free->serverDomain); kfree(buf_to_free->serverNOS); @@ -350,9 +346,9 @@ header_assemble(struct smb_hdr *buffer, char smb_command /* command */ , if (current->fsuid != treeCon->ses->linux_uid) { cFYI(1, ("Multiuser mode and UID " "did not match tcon uid")); - read_lock(&GlobalSMBSeslock); - list_for_each(temp_item, &GlobalSMBSessionList) { - ses = list_entry(temp_item, struct cifsSesInfo, cifsSessionList); + read_lock(&cifs_tcp_ses_lock); + list_for_each(temp_item, &treeCon->ses->server->smb_ses_list) { + ses = list_entry(temp_item, struct cifsSesInfo, smb_ses_list); if (ses->linux_uid == current->fsuid) { if (ses->server == treeCon->ses->server) { cFYI(1, ("found matching uid substitute right smb_uid")); @@ -364,7 +360,7 @@ header_assemble(struct smb_hdr *buffer, char smb_command /* command */ , } } } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); } } } -- cgit v1.2.3-70-g09d2 From d82c2df54e2f7e447476350848d8eccc8d2fe46a Mon Sep 17 00:00:00 2001 From: Steve French Date: Sat, 15 Nov 2008 00:07:26 +0000 Subject: [CIFS] minor cleanup to cifs_mount Signed-off-by: Steve French --- fs/cifs/connect.c | 74 +++++++++++++++++++++++++------------------------------ 1 file changed, 34 insertions(+), 40 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 44130e052e0..a3dc0d7cafc 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1368,7 +1368,6 @@ cifs_find_tcp_session(struct sockaddr *addr) list_for_each(tmp, &cifs_tcp_ses_list) { server = list_entry(tmp, struct TCP_Server_Info, tcp_ses_list); - /* * the demux thread can exit on its own while still in CifsNew * so don't accept any sockets in that state. Since the @@ -1389,6 +1388,7 @@ cifs_find_tcp_session(struct sockaddr *addr) ++server->srv_count; write_unlock(&cifs_tcp_ses_lock); + cFYI(1, ("Existing tcp session with server found")); return server; } write_unlock(&cifs_tcp_ses_lock); @@ -2076,9 +2076,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, } srvTcp = cifs_find_tcp_session(&addr); - if (srvTcp) { - cFYI(1, ("Existing tcp session with server found")); - } else { /* create socket */ + if (!srvTcp) { /* create socket */ if (addr.sa_family == AF_INET6) { cFYI(1, ("attempting ipv6 connect")); /* BB should we allow ipv6 on port 139? */ @@ -2292,45 +2290,41 @@ mount_fail_check: cifs_put_smb_ses(pSesInfo); else cifs_put_tcp_session(srvTcp); - } else { - atomic_inc(&tcon->useCount); - cifs_sb->tcon = tcon; - tcon->ses = pSesInfo; - - /* do not care if following two calls succeed - informational */ - if (!tcon->ipc) { - CIFSSMBQFSDeviceInfo(xid, tcon); - CIFSSMBQFSAttributeInfo(xid, tcon); - } - - /* tell server which Unix caps we support */ - if (tcon->ses->capabilities & CAP_UNIX) - /* reset of caps checks mount to see if unix extensions - disabled for just this mount */ - reset_cifs_unix_caps(xid, tcon, sb, &volume_info); - else - tcon->unix_ext = 0; /* server does not support them */ - - /* convert forward to back slashes in prepath here if needed */ - if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0) - convert_delimiter(cifs_sb->prepath, - CIFS_DIR_SEP(cifs_sb)); + goto out; + } + atomic_inc(&tcon->useCount); + cifs_sb->tcon = tcon; + tcon->ses = pSesInfo; - if ((tcon->unix_ext == 0) && (cifs_sb->rsize > (1024 * 127))) { - cifs_sb->rsize = 1024 * 127; - cFYI(DBG2, - ("no very large read support, rsize now 127K")); - } - if (!(tcon->ses->capabilities & CAP_LARGE_WRITE_X)) - cifs_sb->wsize = min(cifs_sb->wsize, - (tcon->ses->server->maxBuf - - MAX_CIFS_HDR_SIZE)); - if (!(tcon->ses->capabilities & CAP_LARGE_READ_X)) - cifs_sb->rsize = min(cifs_sb->rsize, - (tcon->ses->server->maxBuf - - MAX_CIFS_HDR_SIZE)); + /* do not care if following two calls succeed - informational */ + if (!tcon->ipc) { + CIFSSMBQFSDeviceInfo(xid, tcon); + CIFSSMBQFSAttributeInfo(xid, tcon); } + /* tell server which Unix caps we support */ + if (tcon->ses->capabilities & CAP_UNIX) + /* reset of caps checks mount to see if unix extensions + disabled for just this mount */ + reset_cifs_unix_caps(xid, tcon, sb, &volume_info); + else + tcon->unix_ext = 0; /* server does not support them */ + + /* convert forward to back slashes in prepath here if needed */ + if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0) + convert_delimiter(cifs_sb->prepath, CIFS_DIR_SEP(cifs_sb)); + + if ((tcon->unix_ext == 0) && (cifs_sb->rsize > (1024 * 127))) { + cifs_sb->rsize = 1024 * 127; + cFYI(DBG2, ("no very large read support, rsize now 127K")); + } + if (!(tcon->ses->capabilities & CAP_LARGE_WRITE_X)) + cifs_sb->wsize = min(cifs_sb->wsize, + (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE)); + if (!(tcon->ses->capabilities & CAP_LARGE_READ_X)) + cifs_sb->rsize = min(cifs_sb->rsize, + (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE)); + /* volume_info.password is freed above when existing session found (in which case it is not needed anymore) but when new sesion is created the password ptr is put in the new session structure (in which case the -- cgit v1.2.3-70-g09d2 From cecf61bdee426a3e0a014f7e26990d09c71ed458 Mon Sep 17 00:00:00 2001 From: Alessandro Zummo Date: Fri, 14 Nov 2008 16:37:54 -0800 Subject: rtc: rtc-sun4v fixes, revised - simplified code - use platform_driver_probe - removed locking: it's provided by rtc subsystem Signed-off-by: Alessandro Zummo Signed-off-by: David S. Miller --- drivers/rtc/rtc-sun4v.c | 69 ++++++++++++++----------------------------------- 1 file changed, 19 insertions(+), 50 deletions(-) diff --git a/drivers/rtc/rtc-sun4v.c b/drivers/rtc/rtc-sun4v.c index 2012ccbb4a5..5b2261052a6 100644 --- a/drivers/rtc/rtc-sun4v.c +++ b/drivers/rtc/rtc-sun4v.c @@ -1,4 +1,4 @@ -/* rtc-sun4c.c: Hypervisor based RTC for SUN4V systems. +/* rtc-sun4v.c: Hypervisor based RTC for SUN4V systems. * * Copyright (C) 2008 David S. Miller */ @@ -7,21 +7,11 @@ #include #include #include -#include #include #include #include -MODULE_AUTHOR("David S. Miller "); -MODULE_DESCRIPTION("SUN4V RTC driver"); -MODULE_LICENSE("GPL"); - -struct sun4v_rtc { - struct rtc_device *rtc; - spinlock_t lock; -}; - static unsigned long hypervisor_get_time(void) { unsigned long ret, time; @@ -45,15 +35,7 @@ retry: static int sun4v_read_time(struct device *dev, struct rtc_time *tm) { - struct sun4v_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; - - spin_lock_irqsave(&p->lock, flags); - secs = hypervisor_get_time(); - spin_unlock_irqrestore(&p->lock, flags); - - rtc_time_to_tm(secs, tm); - + rtc_time_to_tm(hypervisor_get_time(), tm); return 0; } @@ -80,19 +62,14 @@ retry: static int sun4v_set_time(struct device *dev, struct rtc_time *tm) { - struct sun4v_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; + unsigned long secs; int err; err = rtc_tm_to_time(tm, &secs); if (err) return err; - spin_lock_irqsave(&p->lock, flags); - err = hypervisor_set_time(secs); - spin_unlock_irqrestore(&p->lock, flags); - - return err; + return hypervisor_set_time(secs); } static const struct rtc_class_ops sun4v_rtc_ops = { @@ -100,33 +77,22 @@ static const struct rtc_class_ops sun4v_rtc_ops = { .set_time = sun4v_set_time, }; -static int __devinit sun4v_rtc_probe(struct platform_device *pdev) +static int __init sun4v_rtc_probe(struct platform_device *pdev) { - struct sun4v_rtc *p = kzalloc(sizeof(*p), GFP_KERNEL); - - if (!p) - return -ENOMEM; - - spin_lock_init(&p->lock); - - p->rtc = rtc_device_register("sun4v", &pdev->dev, + struct rtc_device *rtc = rtc_device_register("sun4v", &pdev->dev, &sun4v_rtc_ops, THIS_MODULE); - if (IS_ERR(p->rtc)) { - int err = PTR_ERR(p->rtc); - kfree(p); - return err; - } - platform_set_drvdata(pdev, p); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + platform_set_drvdata(pdev, rtc); return 0; } -static int __devexit sun4v_rtc_remove(struct platform_device *pdev) +static int __exit sun4v_rtc_remove(struct platform_device *pdev) { - struct sun4v_rtc *p = platform_get_drvdata(pdev); - - rtc_device_unregister(p->rtc); - kfree(p); + struct rtc_device *rtc = platform_get_drvdata(pdev); + rtc_device_unregister(rtc); return 0; } @@ -135,13 +101,12 @@ static struct platform_driver sun4v_rtc_driver = { .name = "rtc-sun4v", .owner = THIS_MODULE, }, - .probe = sun4v_rtc_probe, - .remove = __devexit_p(sun4v_rtc_remove), + .remove = __exit_p(sun4v_rtc_remove), }; static int __init sun4v_rtc_init(void) { - return platform_driver_register(&sun4v_rtc_driver); + return platform_driver_probe(&sun4v_rtc_driver, sun4v_rtc_probe); } static void __exit sun4v_rtc_exit(void) @@ -151,3 +116,7 @@ static void __exit sun4v_rtc_exit(void) module_init(sun4v_rtc_init); module_exit(sun4v_rtc_exit); + +MODULE_AUTHOR("David S. Miller "); +MODULE_DESCRIPTION("SUN4V RTC driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From df81d2371aeca0f7474f197a3090830899016e39 Mon Sep 17 00:00:00 2001 From: Miquel van Smoorenburg Date: Wed, 5 Nov 2008 00:09:12 +0100 Subject: [SCSI] dpt_i2o: fix transferred data length for scsi_set_resid() dpt_i2o.c::adpt_i2o_to_scsi() reads the value at (reply+5) which should contain the length in bytes of the transferred data. This would be correct if reply was a u32 *. However it is a void * here, so we need to read the value at (reply+20) instead. The value at (reply+5) is usually 0xff0000, which is apparently 'large enough' and didn't cause any trouble until 2.6.27 where commit 427e59f09fdba387547106de7bab980b7fff77be Author: James Bottomley Date: Sat Mar 8 18:24:17 2008 -0600 [SCSI] make use of the residue value caused this to become visible through e.g. iostat -x . Signed-off-by: Miquel van Smoorenburg Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/dpt_i2o.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 8aba4fdfb52..6194ed5d02c 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -2445,7 +2445,7 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd) hba_status = detailed_status >> 8; // calculate resid for sg - scsi_set_resid(cmd, scsi_bufflen(cmd) - readl(reply+5)); + scsi_set_resid(cmd, scsi_bufflen(cmd) - readl(reply+20)); pHba = (adpt_hba*) cmd->device->host->hostdata[0]; @@ -2456,7 +2456,7 @@ static s32 adpt_i2o_to_scsi(void __iomem *reply, struct scsi_cmnd* cmd) case I2O_SCSI_DSC_SUCCESS: cmd->result = (DID_OK << 16); // handle underflow - if(readl(reply+5) < cmd->underflow ) { + if (readl(reply+20) < cmd->underflow) { cmd->result = (DID_ERROR <<16); printk(KERN_WARNING"%s: SCSI CMD underflow\n",pHba->name); } -- cgit v1.2.3-70-g09d2 From c39555d6edd0142972f577405d5259879ecc1635 Mon Sep 17 00:00:00 2001 From: Matthew Ranostay Date: Fri, 14 Nov 2008 17:46:22 -0500 Subject: ALSA: hda: STAC_VREF_EVENT value change Changed value for STAC_VREF_EVENT from 0x40 to 0x00 because the unsol response value is only 6-bits width and the former value was 1<<6 which is an overrun. Signed-off-by: Matthew Ranostay Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 1633ef2c654..f205570def1 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -36,9 +36,11 @@ #include "hda_beep.h" #define NUM_CONTROL_ALLOC 32 + +#define STAC_VREF_EVENT 0x00 +#define STAC_INSERT_EVENT 0x10 #define STAC_PWR_EVENT 0x20 #define STAC_HP_EVENT 0x30 -#define STAC_VREF_EVENT 0x40 enum { STAC_REF, -- cgit v1.2.3-70-g09d2 From d6f35e3f0da14a5eb02114708d88ae2f59dc8283 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 14 Nov 2008 19:08:18 +0100 Subject: ALSA: sound/pci/pcxhr/pcxhr.c: introduce missing kfree and pci_disable_device Error handling code following a kzalloc should free the allocated data. The error handling code is adjusted to call pci_disable_device(pci); as well, as done later in the function The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/pci/pcxhr/pcxhr.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c index 0e06c6c9fcc..73de6e989b3 100644 --- a/sound/pci/pcxhr/pcxhr.c +++ b/sound/pci/pcxhr/pcxhr.c @@ -1229,8 +1229,11 @@ static int __devinit pcxhr_probe(struct pci_dev *pci, const struct pci_device_id return -ENOMEM; } - if (snd_BUG_ON(pci_id->driver_data >= PCI_ID_LAST)) + if (snd_BUG_ON(pci_id->driver_data >= PCI_ID_LAST)) { + kfree(mgr); + pci_disable_device(pci); return -ENODEV; + } card_name = pcxhr_board_params[pci_id->driver_data].board_name; mgr->playback_chips = pcxhr_board_params[pci_id->driver_data].playback_chips; mgr->capture_chips = pcxhr_board_params[pci_id->driver_data].capture_chips; -- cgit v1.2.3-70-g09d2 From 8141c7f3e7aee618312fa1c15109e1219de784a7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 15 Nov 2008 10:20:36 -0800 Subject: Move "exit_robust_list" into mm_release() We don't want to get rid of the futexes just at exit() time, we want to drop them when doing an execve() too, since that gets rid of the previous VM image too. Doing it at mm_release() time means that we automatically always do it when we disassociate a VM map from the task. Reported-by: pageexec@freemail.hu Cc: Andrew Morton Cc: Nick Piggin Cc: Hugh Dickins Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Brad Spengler Cc: Alex Efros Cc: Peter Zijlstra Cc: Oleg Nesterov Signed-off-by: Linus Torvalds --- kernel/exit.c | 9 --------- kernel/fork.c | 11 +++++++++++ 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/kernel/exit.c b/kernel/exit.c index ae2b92be5fa..2d8be7ebb0f 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include /* for audit_free() */ #include @@ -1059,14 +1058,6 @@ NORET_TYPE void do_exit(long code) exit_itimers(tsk->signal); } acct_collect(code, group_dead); -#ifdef CONFIG_FUTEX - if (unlikely(tsk->robust_list)) - exit_robust_list(tsk); -#ifdef CONFIG_COMPAT - if (unlikely(tsk->compat_robust_list)) - compat_exit_robust_list(tsk); -#endif -#endif if (group_dead) tty_audit_exit(); if (unlikely(tsk->audit_context)) diff --git a/kernel/fork.c b/kernel/fork.c index f6083561dfe..2a372a0e206 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include #include @@ -519,6 +520,16 @@ void mm_release(struct task_struct *tsk, struct mm_struct *mm) { struct completion *vfork_done = tsk->vfork_done; + /* Get rid of any futexes when releasing the mm */ +#ifdef CONFIG_FUTEX + if (unlikely(tsk->robust_list)) + exit_robust_list(tsk); +#ifdef CONFIG_COMPAT + if (unlikely(tsk->compat_robust_list)) + compat_exit_robust_list(tsk); +#endif +#endif + /* Get rid of any cached register state */ deactivate_mm(tsk, mm); -- cgit v1.2.3-70-g09d2 From 8e5f262bfcd90c041160a491a238661ebbb584a4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 15 Nov 2008 19:28:54 +0100 Subject: ALSA: hda - Check model type instead of SSID in patch_92hd71bxx() Check board preset model instead of codec->subsystem_id in patch_92hd71bxx() so that other hardwares configured via the model option work like the given model. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index f205570def1..0df6f979f2a 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4488,8 +4488,8 @@ again: codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs; break; case 0x111d7608: /* 5 Port with Analog Mixer */ - switch (codec->subsystem_id) { - case 0x103c361a: + switch (spec->board_config) { + case STAC_HP_M4: /* Enable VREF power saving on GPIO1 detect */ snd_hda_codec_write(codec, codec->afg, 0, AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK, 0x02); -- cgit v1.2.3-70-g09d2 From 27123cbc264de89ce6951b1b4c84c223eb0f1702 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 14 Nov 2008 08:10:19 +0100 Subject: m68k: Fix off-by-one in m68k_setup_user_interrupt() commit 69961c375288bdab7604e0bb1c8d22999bb8a347 ("[PATCH] m68k/Atari: Interrupt updates") added a BUG_ON() with an incorrect upper bound comparison, which causes an early crash on VME boards, where IRQ_USER is 8, cnt is 192 and NR_IRQS is 200. Reported-by: Stephen N Chivers Tested-by: Kars de Jong Signed-off-by: Geert Uytterhoeven Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- arch/m68k/kernel/ints.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c index 7e8a0d394e6..761ee0440c9 100644 --- a/arch/m68k/kernel/ints.c +++ b/arch/m68k/kernel/ints.c @@ -133,7 +133,7 @@ void __init m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt, { int i; - BUG_ON(IRQ_USER + cnt >= NR_IRQS); + BUG_ON(IRQ_USER + cnt > NR_IRQS); m68k_first_user_vec = vec; for (i = 0; i < cnt; i++) irq_controller[IRQ_USER + i] = &user_irq_controller; -- cgit v1.2.3-70-g09d2 From fb75109834ca5c5e2f0f17f0c9e20182ea55b65f Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 14 Nov 2008 08:54:46 +0100 Subject: misc: C2port needs m68k allmodconfig: | drivers/misc/c2port/core.c: In function 'c2port_reset': | drivers/misc/c2port/core.c:73: error: dereferencing pointer to incomplete type | drivers/misc/c2port/core.c: In function 'c2port_strobe_ck': | drivers/misc/c2port/core.c:91: error: dereferencing pointer to incomplete type Include to fix it, as m68k's local_irq_enable() needs to know about struct task_struct. Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- drivers/misc/c2port/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c index 976b35d1d03..0207dd59090 100644 --- a/drivers/misc/c2port/core.c +++ b/drivers/misc/c2port/core.c @@ -18,6 +18,7 @@ #include #include #include +#include #include -- cgit v1.2.3-70-g09d2 From 748f1a2ed7a68e15b28a1da3559afbebba121772 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Fri, 14 Nov 2008 16:25:01 +0900 Subject: mm: remove unevictable's show_page_path Hugh Dickins reported show_page_path() is buggy and unsafe because - lack dput() against d_find_alias() - don't concern vma->vm_mm->owner == NULL - lack lock_page() it was only for debugging, so rather than trying to fix it, just remove it now. Reported-by: Hugh Dickins Signed-off-by: Hugh Dickins Signed-off-by: KOSAKI Motohiro CC: Lee Schermerhorn CC: Rik van Riel Signed-off-by: Linus Torvalds --- mm/vmscan.c | 35 ----------------------------------- 1 file changed, 35 deletions(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index 3b5860294bb..c141b3e7807 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -2368,39 +2368,6 @@ int page_evictable(struct page *page, struct vm_area_struct *vma) return 1; } -static void show_page_path(struct page *page) -{ - char buf[256]; - if (page_is_file_cache(page)) { - struct address_space *mapping = page->mapping; - struct dentry *dentry; - pgoff_t pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT); - - spin_lock(&mapping->i_mmap_lock); - dentry = d_find_alias(mapping->host); - printk(KERN_INFO "rescued: %s %lu\n", - dentry_path(dentry, buf, 256), pgoff); - spin_unlock(&mapping->i_mmap_lock); - } else { -#if defined(CONFIG_MM_OWNER) && defined(CONFIG_MMU) - struct anon_vma *anon_vma; - struct vm_area_struct *vma; - - anon_vma = page_lock_anon_vma(page); - if (!anon_vma) - return; - - list_for_each_entry(vma, &anon_vma->head, anon_vma_node) { - printk(KERN_INFO "rescued: anon %s\n", - vma->vm_mm->owner->comm); - break; - } - page_unlock_anon_vma(anon_vma); -#endif - } -} - - /** * check_move_unevictable_page - check page for evictability and move to appropriate zone lru list * @page: page to check evictability and move to appropriate lru list @@ -2421,8 +2388,6 @@ retry: if (page_evictable(page, NULL)) { enum lru_list l = LRU_INACTIVE_ANON + page_is_file_cache(page); - show_page_path(page); - __dec_zone_state(zone, NR_UNEVICTABLE); list_move(&page->lru, &zone->lru[l].list); __inc_zone_state(zone, NR_INACTIVE_ANON + l); -- cgit v1.2.3-70-g09d2 From 52168e60f7d86d83124903098ac8c2dba93cd1c4 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 14 Nov 2008 13:47:31 +0000 Subject: Revert "x86: blacklist DMAR on Intel G31/G33 chipsets" This reverts commit e51af6630848406fc97adbd71443818cdcda297b, which was wrongly hoovered up and submitted about a month after a better fix had already been merged. The better fix is commit cbda1ba898647aeb4ee770b803c922f595e97731 ("PCI/iommu: blacklist DMAR on Intel G31/G33 chipsets"), where we do this blacklisting based on the DMI identification for the offending motherboard, since sometimes this chipset (or at least a chipset with the same PCI ID) apparently _does_ actually have an IOMMU. Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- arch/x86/include/asm/iommu.h | 1 - arch/x86/kernel/early-quirks.c | 18 ------------------ 2 files changed, 19 deletions(-) diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h index e4a552d4446..0b500c5b644 100644 --- a/arch/x86/include/asm/iommu.h +++ b/arch/x86/include/asm/iommu.h @@ -6,7 +6,6 @@ extern void no_iommu_init(void); extern struct dma_mapping_ops nommu_dma_ops; extern int force_iommu, no_iommu; extern int iommu_detected; -extern int dmar_disabled; extern unsigned long iommu_nr_pages(unsigned long addr, unsigned long len); diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 3ce029ffaa5..1b894b72c0f 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -188,20 +188,6 @@ static void __init ati_bugs_contd(int num, int slot, int func) } #endif -#ifdef CONFIG_DMAR -static void __init intel_g33_dmar(int num, int slot, int func) -{ - struct acpi_table_header *dmar_tbl; - acpi_status status; - - status = acpi_get_table(ACPI_SIG_DMAR, 0, &dmar_tbl); - if (ACPI_SUCCESS(status)) { - printk(KERN_INFO "BIOS BUG: DMAR advertised on Intel G31/G33 chipset -- ignoring\n"); - dmar_disabled = 1; - } -} -#endif - #define QFLAG_APPLY_ONCE 0x1 #define QFLAG_APPLIED 0x2 #define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED) @@ -225,10 +211,6 @@ static struct chipset early_qrk[] __initdata = { PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd }, -#ifdef CONFIG_DMAR - { PCI_VENDOR_ID_INTEL, 0x29c0, - PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, intel_g33_dmar }, -#endif {} }; -- cgit v1.2.3-70-g09d2 From d091c2f58ba32029495a933b721e8e02fbd12caa Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 12 Nov 2008 21:16:43 +0100 Subject: Add 'pr_fmt()' format modifier to pr_xyz macros. A common reason for device drivers to implement their own printk macros is the lack of a printk prefix with the standard pr_xyz macros. Introduce a pr_fmt() macro that is applied for every pr_xyz macro to the format string. The most common use of the pr_fmt macro would be to add the name of the device driver to all pr_xyz messages in a source file. Signed-off-by: Martin Schwidefsky Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 42 +++++++++++++++++++++++------------------- 1 file changed, 23 insertions(+), 19 deletions(-) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index fba141d3ca0..dc7e0d0a647 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -318,32 +318,36 @@ static inline char *pack_hex_byte(char *buf, u8 byte) return buf; } -#define pr_emerg(fmt, arg...) \ - printk(KERN_EMERG fmt, ##arg) -#define pr_alert(fmt, arg...) \ - printk(KERN_ALERT fmt, ##arg) -#define pr_crit(fmt, arg...) \ - printk(KERN_CRIT fmt, ##arg) -#define pr_err(fmt, arg...) \ - printk(KERN_ERR fmt, ##arg) -#define pr_warning(fmt, arg...) \ - printk(KERN_WARNING fmt, ##arg) -#define pr_notice(fmt, arg...) \ - printk(KERN_NOTICE fmt, ##arg) -#define pr_info(fmt, arg...) \ - printk(KERN_INFO fmt, ##arg) +#ifndef pr_fmt +#define pr_fmt(fmt) fmt +#endif + +#define pr_emerg(fmt, ...) \ + printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) +#define pr_alert(fmt, ...) \ + printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_crit(fmt, ...) \ + printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) +#define pr_err(fmt, ...) \ + printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) +#define pr_warning(fmt, ...) \ + printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) +#define pr_notice(fmt, ...) \ + printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) +#define pr_info(fmt, ...) \ + printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) /* If you are writing a driver, please use dev_dbg instead */ #if defined(CONFIG_DYNAMIC_PRINTK_DEBUG) #define pr_debug(fmt, ...) do { \ - dynamic_pr_debug(fmt, ##__VA_ARGS__); \ + dynamic_pr_debug(pr_fmt(fmt), ##__VA_ARGS__); \ } while (0) #elif defined(DEBUG) -#define pr_debug(fmt, arg...) \ - printk(KERN_DEBUG fmt, ##arg) +#define pr_debug(fmt, ...) \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) #else -#define pr_debug(fmt, arg...) \ - ({ if (0) printk(KERN_DEBUG fmt, ##arg); 0; }) +#define pr_debug(fmt, ...) \ + ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) #endif /* -- cgit v1.2.3-70-g09d2 From 0d3b71009737511ea937ac405205fd8214b898bb Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Thu, 13 Nov 2008 20:14:17 +0800 Subject: LIS3LV02Dx: remove unused #include The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/hwmon/lis3lv02d.c This patch removes the said #include . Signed-off-by: Huang Weiyi Signed-off-by: Linus Torvalds --- drivers/hwmon/lis3lv02d.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c index 752b5c44df9..c002144c76b 100644 --- a/drivers/hwmon/lis3lv02d.c +++ b/drivers/hwmon/lis3lv02d.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3-70-g09d2 From 8f7b0ba1c853919b85b54774775f567f30006107 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 15 Nov 2008 01:15:43 +0000 Subject: Fix inotify watch removal/umount races Inotify watch removals suck violently. To kick the watch out we need (in this order) inode->inotify_mutex and ih->mutex. That's fine if we have a hold on inode; however, for all other cases we need to make damn sure we don't race with umount. We can *NOT* just grab a reference to a watch - inotify_unmount_inodes() will happily sail past it and we'll end with reference to inode potentially outliving its superblock. Ideally we just want to grab an active reference to superblock if we can; that will make sure we won't go into inotify_umount_inodes() until we are done. Cleanup is just deactivate_super(). However, that leaves a messy case - what if we *are* racing with umount() and active references to superblock can't be acquired anymore? We can bump ->s_count, grab ->s_umount, which will almost certainly wait until the superblock is shut down and the watch in question is pining for fjords. That's fine, but there is a problem - we might have hit the window between ->s_active getting to 0 / ->s_count - below S_BIAS (i.e. the moment when superblock is past the point of no return and is heading for shutdown) and the moment when deactivate_super() acquires ->s_umount. We could just do drop_super() yield() and retry, but that's rather antisocial and this stuff is luser-triggerable. OTOH, having grabbed ->s_umount and having found that we'd got there first (i.e. that ->s_root is non-NULL) we know that we won't race with inotify_umount_inodes(). So we could grab a reference to watch and do the rest as above, just with drop_super() instead of deactivate_super(), right? Wrong. We had to drop ih->mutex before we could grab ->s_umount. So the watch could've been gone already. That still can be dealt with - we need to save watch->wd, do idr_find() and compare its result with our pointer. If they match, we either have the damn thing still alive or we'd lost not one but two races at once, the watch had been killed and a new one got created with the same ->wd at the same address. That couldn't have happened in inotify_destroy(), but inotify_rm_wd() could run into that. Still, "new one got created" is not a problem - we have every right to kill it or leave it alone, whatever's more convenient. So we can use idr_find(...) == watch && watch->inode->i_sb == sb as "grab it and kill it" check. If it's been our original watch, we are fine, if it's a newcomer - nevermind, just pretend that we'd won the race and kill the fscker anyway; we are safe since we know that its superblock won't be going away. And yes, this is far beyond mere "not very pretty"; so's the entire concept of inotify to start with. Signed-off-by: Al Viro Acked-by: Greg KH Signed-off-by: Linus Torvalds --- fs/inotify.c | 150 ++++++++++++++++++++++++++++++++++++++++++++++-- include/linux/inotify.h | 11 ++++ kernel/audit_tree.c | 91 +++++++++++++++++------------ kernel/auditfilter.c | 14 +++-- 4 files changed, 218 insertions(+), 48 deletions(-) diff --git a/fs/inotify.c b/fs/inotify.c index 690e72595e6..7bbed1b8982 100644 --- a/fs/inotify.c +++ b/fs/inotify.c @@ -106,6 +106,20 @@ void get_inotify_watch(struct inotify_watch *watch) } EXPORT_SYMBOL_GPL(get_inotify_watch); +int pin_inotify_watch(struct inotify_watch *watch) +{ + struct super_block *sb = watch->inode->i_sb; + spin_lock(&sb_lock); + if (sb->s_count >= S_BIAS) { + atomic_inc(&sb->s_active); + spin_unlock(&sb_lock); + atomic_inc(&watch->count); + return 1; + } + spin_unlock(&sb_lock); + return 0; +} + /** * put_inotify_watch - decrements the ref count on a given watch. cleans up * watch references if the count reaches zero. inotify_watch is freed by @@ -124,6 +138,13 @@ void put_inotify_watch(struct inotify_watch *watch) } EXPORT_SYMBOL_GPL(put_inotify_watch); +void unpin_inotify_watch(struct inotify_watch *watch) +{ + struct super_block *sb = watch->inode->i_sb; + put_inotify_watch(watch); + deactivate_super(sb); +} + /* * inotify_handle_get_wd - returns the next WD for use by the given handle * @@ -479,6 +500,112 @@ void inotify_init_watch(struct inotify_watch *watch) } EXPORT_SYMBOL_GPL(inotify_init_watch); +/* + * Watch removals suck violently. To kick the watch out we need (in this + * order) inode->inotify_mutex and ih->mutex. That's fine if we have + * a hold on inode; however, for all other cases we need to make damn sure + * we don't race with umount. We can *NOT* just grab a reference to a + * watch - inotify_unmount_inodes() will happily sail past it and we'll end + * with reference to inode potentially outliving its superblock. Ideally + * we just want to grab an active reference to superblock if we can; that + * will make sure we won't go into inotify_umount_inodes() until we are + * done. Cleanup is just deactivate_super(). However, that leaves a messy + * case - what if we *are* racing with umount() and active references to + * superblock can't be acquired anymore? We can bump ->s_count, grab + * ->s_umount, which will almost certainly wait until the superblock is shut + * down and the watch in question is pining for fjords. That's fine, but + * there is a problem - we might have hit the window between ->s_active + * getting to 0 / ->s_count - below S_BIAS (i.e. the moment when superblock + * is past the point of no return and is heading for shutdown) and the + * moment when deactivate_super() acquires ->s_umount. We could just do + * drop_super() yield() and retry, but that's rather antisocial and this + * stuff is luser-triggerable. OTOH, having grabbed ->s_umount and having + * found that we'd got there first (i.e. that ->s_root is non-NULL) we know + * that we won't race with inotify_umount_inodes(). So we could grab a + * reference to watch and do the rest as above, just with drop_super() instead + * of deactivate_super(), right? Wrong. We had to drop ih->mutex before we + * could grab ->s_umount. So the watch could've been gone already. + * + * That still can be dealt with - we need to save watch->wd, do idr_find() + * and compare its result with our pointer. If they match, we either have + * the damn thing still alive or we'd lost not one but two races at once, + * the watch had been killed and a new one got created with the same ->wd + * at the same address. That couldn't have happened in inotify_destroy(), + * but inotify_rm_wd() could run into that. Still, "new one got created" + * is not a problem - we have every right to kill it or leave it alone, + * whatever's more convenient. + * + * So we can use idr_find(...) == watch && watch->inode->i_sb == sb as + * "grab it and kill it" check. If it's been our original watch, we are + * fine, if it's a newcomer - nevermind, just pretend that we'd won the + * race and kill the fscker anyway; we are safe since we know that its + * superblock won't be going away. + * + * And yes, this is far beyond mere "not very pretty"; so's the entire + * concept of inotify to start with. + */ + +/** + * pin_to_kill - pin the watch down for removal + * @ih: inotify handle + * @watch: watch to kill + * + * Called with ih->mutex held, drops it. Possible return values: + * 0 - nothing to do, it has died + * 1 - remove it, drop the reference and deactivate_super() + * 2 - remove it, drop the reference and drop_super(); we tried hard to avoid + * that variant, since it involved a lot of PITA, but that's the best that + * could've been done. + */ +static int pin_to_kill(struct inotify_handle *ih, struct inotify_watch *watch) +{ + struct super_block *sb = watch->inode->i_sb; + s32 wd = watch->wd; + + spin_lock(&sb_lock); + if (sb->s_count >= S_BIAS) { + atomic_inc(&sb->s_active); + spin_unlock(&sb_lock); + get_inotify_watch(watch); + mutex_unlock(&ih->mutex); + return 1; /* the best outcome */ + } + sb->s_count++; + spin_unlock(&sb_lock); + mutex_unlock(&ih->mutex); /* can't grab ->s_umount under it */ + down_read(&sb->s_umount); + if (likely(!sb->s_root)) { + /* fs is already shut down; the watch is dead */ + drop_super(sb); + return 0; + } + /* raced with the final deactivate_super() */ + mutex_lock(&ih->mutex); + if (idr_find(&ih->idr, wd) != watch || watch->inode->i_sb != sb) { + /* the watch is dead */ + mutex_unlock(&ih->mutex); + drop_super(sb); + return 0; + } + /* still alive or freed and reused with the same sb and wd; kill */ + get_inotify_watch(watch); + mutex_unlock(&ih->mutex); + return 2; +} + +static void unpin_and_kill(struct inotify_watch *watch, int how) +{ + struct super_block *sb = watch->inode->i_sb; + put_inotify_watch(watch); + switch (how) { + case 1: + deactivate_super(sb); + break; + case 2: + drop_super(sb); + } +} + /** * inotify_destroy - clean up and destroy an inotify instance * @ih: inotify handle @@ -490,11 +617,15 @@ void inotify_destroy(struct inotify_handle *ih) * pretty. We cannot do a simple iteration over the list, because we * do not know the inode until we iterate to the watch. But we need to * hold inode->inotify_mutex before ih->mutex. The following works. + * + * AV: it had to become even uglier to start working ;-/ */ while (1) { struct inotify_watch *watch; struct list_head *watches; + struct super_block *sb; struct inode *inode; + int how; mutex_lock(&ih->mutex); watches = &ih->watches; @@ -503,8 +634,10 @@ void inotify_destroy(struct inotify_handle *ih) break; } watch = list_first_entry(watches, struct inotify_watch, h_list); - get_inotify_watch(watch); - mutex_unlock(&ih->mutex); + sb = watch->inode->i_sb; + how = pin_to_kill(ih, watch); + if (!how) + continue; inode = watch->inode; mutex_lock(&inode->inotify_mutex); @@ -518,7 +651,7 @@ void inotify_destroy(struct inotify_handle *ih) mutex_unlock(&ih->mutex); mutex_unlock(&inode->inotify_mutex); - put_inotify_watch(watch); + unpin_and_kill(watch, how); } /* free this handle: the put matching the get in inotify_init() */ @@ -719,7 +852,9 @@ void inotify_evict_watch(struct inotify_watch *watch) int inotify_rm_wd(struct inotify_handle *ih, u32 wd) { struct inotify_watch *watch; + struct super_block *sb; struct inode *inode; + int how; mutex_lock(&ih->mutex); watch = idr_find(&ih->idr, wd); @@ -727,9 +862,12 @@ int inotify_rm_wd(struct inotify_handle *ih, u32 wd) mutex_unlock(&ih->mutex); return -EINVAL; } - get_inotify_watch(watch); + sb = watch->inode->i_sb; + how = pin_to_kill(ih, watch); + if (!how) + return 0; + inode = watch->inode; - mutex_unlock(&ih->mutex); mutex_lock(&inode->inotify_mutex); mutex_lock(&ih->mutex); @@ -740,7 +878,7 @@ int inotify_rm_wd(struct inotify_handle *ih, u32 wd) mutex_unlock(&ih->mutex); mutex_unlock(&inode->inotify_mutex); - put_inotify_watch(watch); + unpin_and_kill(watch, how); return 0; } diff --git a/include/linux/inotify.h b/include/linux/inotify.h index bd578578a8b..37ea2894b3c 100644 --- a/include/linux/inotify.h +++ b/include/linux/inotify.h @@ -134,6 +134,8 @@ extern void inotify_remove_watch_locked(struct inotify_handle *, struct inotify_watch *); extern void get_inotify_watch(struct inotify_watch *); extern void put_inotify_watch(struct inotify_watch *); +extern int pin_inotify_watch(struct inotify_watch *); +extern void unpin_inotify_watch(struct inotify_watch *); #else @@ -228,6 +230,15 @@ static inline void put_inotify_watch(struct inotify_watch *watch) { } +extern inline int pin_inotify_watch(struct inotify_watch *watch) +{ + return 0; +} + +extern inline void unpin_inotify_watch(struct inotify_watch *watch) +{ +} + #endif /* CONFIG_INOTIFY */ #endif /* __KERNEL __ */ diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index 8ba0e0d934f..8b509441f49 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -24,6 +24,7 @@ struct audit_chunk { struct list_head trees; /* with root here */ int dead; int count; + atomic_long_t refs; struct rcu_head head; struct node { struct list_head list; @@ -56,7 +57,8 @@ static LIST_HEAD(prune_list); * tree is refcounted; one reference for "some rules on rules_list refer to * it", one for each chunk with pointer to it. * - * chunk is refcounted by embedded inotify_watch. + * chunk is refcounted by embedded inotify_watch + .refs (non-zero refcount + * of watch contributes 1 to .refs). * * node.index allows to get from node.list to containing chunk. * MSB of that sucker is stolen to mark taggings that we might have to @@ -121,6 +123,7 @@ static struct audit_chunk *alloc_chunk(int count) INIT_LIST_HEAD(&chunk->hash); INIT_LIST_HEAD(&chunk->trees); chunk->count = count; + atomic_long_set(&chunk->refs, 1); for (i = 0; i < count; i++) { INIT_LIST_HEAD(&chunk->owners[i].list); chunk->owners[i].index = i; @@ -129,9 +132,8 @@ static struct audit_chunk *alloc_chunk(int count) return chunk; } -static void __free_chunk(struct rcu_head *rcu) +static void free_chunk(struct audit_chunk *chunk) { - struct audit_chunk *chunk = container_of(rcu, struct audit_chunk, head); int i; for (i = 0; i < chunk->count; i++) { @@ -141,14 +143,16 @@ static void __free_chunk(struct rcu_head *rcu) kfree(chunk); } -static inline void free_chunk(struct audit_chunk *chunk) +void audit_put_chunk(struct audit_chunk *chunk) { - call_rcu(&chunk->head, __free_chunk); + if (atomic_long_dec_and_test(&chunk->refs)) + free_chunk(chunk); } -void audit_put_chunk(struct audit_chunk *chunk) +static void __put_chunk(struct rcu_head *rcu) { - put_inotify_watch(&chunk->watch); + struct audit_chunk *chunk = container_of(rcu, struct audit_chunk, head); + audit_put_chunk(chunk); } enum {HASH_SIZE = 128}; @@ -176,7 +180,7 @@ struct audit_chunk *audit_tree_lookup(const struct inode *inode) list_for_each_entry_rcu(p, list, hash) { if (p->watch.inode == inode) { - get_inotify_watch(&p->watch); + atomic_long_inc(&p->refs); return p; } } @@ -194,17 +198,49 @@ int audit_tree_match(struct audit_chunk *chunk, struct audit_tree *tree) /* tagging and untagging inodes with trees */ -static void untag_chunk(struct audit_chunk *chunk, struct node *p) +static struct audit_chunk *find_chunk(struct node *p) +{ + int index = p->index & ~(1U<<31); + p -= index; + return container_of(p, struct audit_chunk, owners[0]); +} + +static void untag_chunk(struct node *p) { + struct audit_chunk *chunk = find_chunk(p); struct audit_chunk *new; struct audit_tree *owner; int size = chunk->count - 1; int i, j; + if (!pin_inotify_watch(&chunk->watch)) { + /* + * Filesystem is shutting down; all watches are getting + * evicted, just take it off the node list for this + * tree and let the eviction logics take care of the + * rest. + */ + owner = p->owner; + if (owner->root == chunk) { + list_del_init(&owner->same_root); + owner->root = NULL; + } + list_del_init(&p->list); + p->owner = NULL; + put_tree(owner); + return; + } + + spin_unlock(&hash_lock); + + /* + * pin_inotify_watch() succeeded, so the watch won't go away + * from under us. + */ mutex_lock(&chunk->watch.inode->inotify_mutex); if (chunk->dead) { mutex_unlock(&chunk->watch.inode->inotify_mutex); - return; + goto out; } owner = p->owner; @@ -221,7 +257,7 @@ static void untag_chunk(struct audit_chunk *chunk, struct node *p) inotify_evict_watch(&chunk->watch); mutex_unlock(&chunk->watch.inode->inotify_mutex); put_inotify_watch(&chunk->watch); - return; + goto out; } new = alloc_chunk(size); @@ -263,7 +299,7 @@ static void untag_chunk(struct audit_chunk *chunk, struct node *p) inotify_evict_watch(&chunk->watch); mutex_unlock(&chunk->watch.inode->inotify_mutex); put_inotify_watch(&chunk->watch); - return; + goto out; Fallback: // do the best we can @@ -277,6 +313,9 @@ Fallback: put_tree(owner); spin_unlock(&hash_lock); mutex_unlock(&chunk->watch.inode->inotify_mutex); +out: + unpin_inotify_watch(&chunk->watch); + spin_lock(&hash_lock); } static int create_chunk(struct inode *inode, struct audit_tree *tree) @@ -387,13 +426,6 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) return 0; } -static struct audit_chunk *find_chunk(struct node *p) -{ - int index = p->index & ~(1U<<31); - p -= index; - return container_of(p, struct audit_chunk, owners[0]); -} - static void kill_rules(struct audit_tree *tree) { struct audit_krule *rule, *next; @@ -431,17 +463,10 @@ static void prune_one(struct audit_tree *victim) spin_lock(&hash_lock); while (!list_empty(&victim->chunks)) { struct node *p; - struct audit_chunk *chunk; p = list_entry(victim->chunks.next, struct node, list); - chunk = find_chunk(p); - get_inotify_watch(&chunk->watch); - spin_unlock(&hash_lock); - - untag_chunk(chunk, p); - put_inotify_watch(&chunk->watch); - spin_lock(&hash_lock); + untag_chunk(p); } spin_unlock(&hash_lock); put_tree(victim); @@ -469,7 +494,6 @@ static void trim_marked(struct audit_tree *tree) while (!list_empty(&tree->chunks)) { struct node *node; - struct audit_chunk *chunk; node = list_entry(tree->chunks.next, struct node, list); @@ -477,14 +501,7 @@ static void trim_marked(struct audit_tree *tree) if (!(node->index & (1U<<31))) break; - chunk = find_chunk(node); - get_inotify_watch(&chunk->watch); - spin_unlock(&hash_lock); - - untag_chunk(chunk, node); - - put_inotify_watch(&chunk->watch); - spin_lock(&hash_lock); + untag_chunk(node); } if (!tree->root && !tree->goner) { tree->goner = 1; @@ -878,7 +895,7 @@ static void handle_event(struct inotify_watch *watch, u32 wd, u32 mask, static void destroy_watch(struct inotify_watch *watch) { struct audit_chunk *chunk = container_of(watch, struct audit_chunk, watch); - free_chunk(chunk); + call_rcu(&chunk->head, __put_chunk); } static const struct inotify_operations rtree_inotify_ops = { diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index b7d354e2b0e..9fd85a4640a 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1094,8 +1094,8 @@ static void audit_inotify_unregister(struct list_head *in_list) list_for_each_entry_safe(p, n, in_list, ilist) { list_del(&p->ilist); inotify_rm_watch(audit_ih, &p->wdata); - /* the put matching the get in audit_do_del_rule() */ - put_inotify_watch(&p->wdata); + /* the unpin matching the pin in audit_do_del_rule() */ + unpin_inotify_watch(&p->wdata); } } @@ -1389,9 +1389,13 @@ static inline int audit_del_rule(struct audit_entry *entry, /* Put parent on the inotify un-registration * list. Grab a reference before releasing * audit_filter_mutex, to be released in - * audit_inotify_unregister(). */ - list_add(&parent->ilist, &inotify_list); - get_inotify_watch(&parent->wdata); + * audit_inotify_unregister(). + * If filesystem is going away, just leave + * the sucker alone, eviction will take + * care of it. + */ + if (pin_inotify_watch(&parent->wdata)) + list_add(&parent->ilist, &inotify_list); } } } -- cgit v1.2.3-70-g09d2 From 9bf1a2445f3c569098b8de7097ca324e65abecc2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 15 Nov 2008 13:42:56 -0800 Subject: Linux 2.6.28-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 7f9ff9bf154..a9ae5dc0aa1 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 28 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Killer Bat of Doom # *DOCUMENTATION* -- cgit v1.2.3-70-g09d2 From d53b93f2603554c3420e301bd13ee2c354a15ceb Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Wed, 5 Nov 2008 04:48:36 +0000 Subject: mlx4_en: Pause parameters per port Before the change the driver reported the same pause parameters for all the ports, even only one of them was modified. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_netdev.c | 8 ++++---- drivers/net/mlx4/en_params.c | 30 ++++++++++++++++-------------- drivers/net/mlx4/mlx4_en.h | 8 ++++---- 3 files changed, 24 insertions(+), 22 deletions(-) diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index a3f732418c4..96e709d6440 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -656,10 +656,10 @@ static int mlx4_en_start_port(struct net_device *dev) /* Configure port */ err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - mdev->profile.tx_pause, - mdev->profile.tx_ppp, - mdev->profile.rx_pause, - mdev->profile.rx_ppp); + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp); if (err) { mlx4_err(mdev, "Failed setting port general configurations" " for port %d, with error %d\n", priv->port, err); diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_params.c index c2e69b1bcd0..95706ee1c01 100644 --- a/drivers/net/mlx4/en_params.c +++ b/drivers/net/mlx4/en_params.c @@ -90,6 +90,7 @@ MLX4_EN_PARM_INT(rx_ring_size2, MLX4_EN_AUTO_CONF, "Rx ring size for port 2"); int mlx4_en_get_profile(struct mlx4_en_dev *mdev) { struct mlx4_en_profile *params = &mdev->profile; + int i; params->rx_moder_cnt = min_t(int, rx_moder_cnt, MLX4_EN_AUTO_CONF); params->rx_moder_time = min_t(int, rx_moder_time, MLX4_EN_AUTO_CONF); @@ -97,11 +98,13 @@ int mlx4_en_get_profile(struct mlx4_en_dev *mdev) params->rss_xor = (rss_xor != 0); params->rss_mask = rss_mask & 0x1f; params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS); - params->rx_pause = pprx; - params->rx_ppp = pfcrx; - params->tx_pause = pptx; - params->tx_ppp = pfctx; - if (params->rx_ppp || params->tx_ppp) { + for (i = 1; i <= MLX4_MAX_PORTS; i++) { + params->prof[i].rx_pause = pprx; + params->prof[i].rx_ppp = pfcrx; + params->prof[i].tx_pause = pptx; + params->prof[i].tx_ppp = pfctx; + } + if (pfcrx || pfctx) { params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM; params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM; } else { @@ -407,14 +410,14 @@ static int mlx4_en_set_pauseparam(struct net_device *dev, struct mlx4_en_dev *mdev = priv->mdev; int err; - mdev->profile.tx_pause = pause->tx_pause != 0; - mdev->profile.rx_pause = pause->rx_pause != 0; + priv->prof->tx_pause = pause->tx_pause != 0; + priv->prof->rx_pause = pause->rx_pause != 0; err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - mdev->profile.tx_pause, - mdev->profile.tx_ppp, - mdev->profile.rx_pause, - mdev->profile.rx_ppp); + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp); if (err) mlx4_err(mdev, "Failed setting pause params to\n"); @@ -425,10 +428,9 @@ static void mlx4_en_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *pause) { struct mlx4_en_priv *priv = netdev_priv(dev); - struct mlx4_en_dev *mdev = priv->mdev; - pause->tx_pause = mdev->profile.tx_pause; - pause->rx_pause = mdev->profile.rx_pause; + pause->tx_pause = priv->prof->tx_pause; + pause->rx_pause = priv->prof->rx_pause; } static void mlx4_en_get_ringparam(struct net_device *dev, diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h index 11fb17c6e97..98ddc0811f9 100644 --- a/drivers/net/mlx4/mlx4_en.h +++ b/drivers/net/mlx4/mlx4_en.h @@ -322,6 +322,10 @@ struct mlx4_en_port_profile { u32 rx_ring_num; u32 tx_ring_size; u32 rx_ring_size; + u8 rx_pause; + u8 rx_ppp; + u8 tx_pause; + u8 tx_ppp; }; struct mlx4_en_profile { @@ -333,10 +337,6 @@ struct mlx4_en_profile { int rx_moder_cnt; int rx_moder_time; int auto_moder; - u8 rx_pause; - u8 rx_ppp; - u8 tx_pause; - u8 tx_ppp; u8 no_reset; struct mlx4_en_port_profile prof[MLX4_MAX_PORTS + 1]; }; -- cgit v1.2.3-70-g09d2 From 605f196efbf8dcbb3581e76ddd0573899dffcf1f Mon Sep 17 00:00:00 2001 From: Ron Madrid Date: Thu, 6 Nov 2008 09:05:26 +0000 Subject: phy: Add support for Marvell 88E1118 PHY This patch will add support for the Marvell 88E1118 PHY which supports gigabit ethernet among other things. Signed-off-by: Ron Madrid Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 4aa54794704..eb6411c4694 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -227,6 +227,59 @@ static int m88e1111_config_init(struct phy_device *phydev) return 0; } +static int m88e1118_config_aneg(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + err = phy_write(phydev, MII_M1011_PHY_SCR, + MII_M1011_PHY_SCR_AUTO_CROSS); + if (err < 0) + return err; + + err = genphy_config_aneg(phydev); + return 0; +} + +static int m88e1118_config_init(struct phy_device *phydev) +{ + int err; + + /* Change address */ + err = phy_write(phydev, 0x16, 0x0002); + if (err < 0) + return err; + + /* Enable 1000 Mbit */ + err = phy_write(phydev, 0x15, 0x1070); + if (err < 0) + return err; + + /* Change address */ + err = phy_write(phydev, 0x16, 0x0003); + if (err < 0) + return err; + + /* Adjust LED Control */ + err = phy_write(phydev, 0x10, 0x021e); + if (err < 0) + return err; + + /* Reset address */ + err = phy_write(phydev, 0x16, 0x0); + if (err < 0) + return err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + return 0; +} + static int m88e1145_config_init(struct phy_device *phydev) { int err; @@ -415,6 +468,19 @@ static struct phy_driver marvell_drivers[] = { .config_intr = &marvell_config_intr, .driver = { .owner = THIS_MODULE }, }, + { + .phy_id = 0x01410e10, + .phy_id_mask = 0xfffffff0, + .name = "Marvell 88E1118", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &m88e1118_config_init, + .config_aneg = &m88e1118_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .driver = {.owner = THIS_MODULE,}, + }, { .phy_id = 0x01410cd0, .phy_id_mask = 0xfffffff0, -- cgit v1.2.3-70-g09d2 From 29d7b90c15035741d15421b36000509212b3e135 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 16 Nov 2008 08:07:15 +0100 Subject: sched: fix kernel warning on /proc/sched_debug access Luis Henriques reported that with CONFIG_PREEMPT=y + CONFIG_PREEMPT_DEBUG=y + CONFIG_SCHED_DEBUG=y + CONFIG_LATENCYTOP=y enabled, the following warning triggers when using latencytop: > [ 775.663239] BUG: using smp_processor_id() in preemptible [00000000] code: latencytop/6585 > [ 775.663303] caller is native_sched_clock+0x3a/0x80 > [ 775.663314] Pid: 6585, comm: latencytop Tainted: G W 2.6.28-rc4-00355-g9c7c354 #1 > [ 775.663322] Call Trace: > [ 775.663343] [] debug_smp_processor_id+0xe4/0xf0 > [ 775.663356] [] native_sched_clock+0x3a/0x80 > [ 775.663368] [] sched_clock+0x9/0x10 > [ 775.663381] [] proc_sched_show_task+0x8bd/0x10e0 > [ 775.663395] [] sched_show+0x3e/0x80 > [ 775.663408] [] seq_read+0xdb/0x350 > [ 775.663421] [] ? security_file_permission+0x16/0x20 > [ 775.663435] [] vfs_read+0xc8/0x170 > [ 775.663447] [] sys_read+0x55/0x90 > [ 775.663460] [] system_call_fastpath+0x16/0x1b > ... This breakage was caused by me via: 7cbaef9: sched: optimize sched_clock() a bit Change the calls to cpu_clock(). Reported-by: Luis Henriques --- kernel/sched_debug.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index 48ecc51e770..26ed8e3d1c1 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -423,10 +423,11 @@ void proc_sched_show_task(struct task_struct *p, struct seq_file *m) #undef __P { + unsigned int this_cpu = raw_smp_processor_id(); u64 t0, t1; - t0 = sched_clock(); - t1 = sched_clock(); + t0 = cpu_clock(this_cpu); + t1 = cpu_clock(this_cpu); SEQ_printf(m, "%-35s:%21Ld\n", "clock-delta", (long long)(t1-t0)); } -- cgit v1.2.3-70-g09d2 From e47411b1f4456480d6c60ebdc7a733e81ccd5d66 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 16 Nov 2008 08:27:53 +0100 Subject: MAINTAINERS: remove me as RAID maintainer Neil has been the maintainer of the RAID/MD code for a long time, remove me as a co-maintainer. Signed-off-by: Ingo Molnar --- MAINTAINERS | 2 -- 1 file changed, 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 8e0777fae3c..627e4c89328 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3928,8 +3928,6 @@ M: bootc@bootc.net S: Maintained SOFTWARE RAID (Multiple Disks) SUPPORT -P: Ingo Molnar -M: mingo@redhat.com P: Neil Brown M: neilb@suse.de L: linux-raid@vger.kernel.org -- cgit v1.2.3-70-g09d2 From 5821e1b74f0d08952cb5da4bfd2d9a388d8df58e Mon Sep 17 00:00:00 2001 From: walimis Date: Sat, 15 Nov 2008 15:19:06 +0800 Subject: function tracing: fix wrong pos computing when read buffer has been fulfilled Impact: make output of available_filter_functions complete phenomenon: The first value of dyn_ftrace_total_info is not equal with `cat available_filter_functions | wc -l`, but they should be equal. root cause: When printing functions with seq_printf in t_show, if the read buffer is just overflowed by current function record, then this function won't be printed to user space through read buffer, it will just be dropped. So we can't see this function printing. So, every time the last function to fill the read buffer, if overflowed, will be dropped. This also applies to set_ftrace_filter if set_ftrace_filter has more bytes than read buffer. fix: Through checking return value of seq_printf, if less than 0, we know this function doesn't be printed. Then we decrease position to force this function to be printed next time, in next read buffer. Another little fix is to show correct allocating pages count. Signed-off-by: walimis Acked-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/ftrace.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 14fa52297b2..e60205722d0 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -673,7 +673,7 @@ static int __init ftrace_dyn_table_alloc(unsigned long num_to_init) cnt = num_to_init / ENTRIES_PER_PAGE; pr_info("ftrace: allocating %ld entries in %d pages\n", - num_to_init, cnt); + num_to_init, cnt + 1); for (i = 0; i < cnt; i++) { pg->next = (void *)get_zeroed_page(GFP_KERNEL); @@ -753,13 +753,11 @@ static void *t_start(struct seq_file *m, loff_t *pos) void *p = NULL; loff_t l = -1; - if (*pos != iter->pos) { - for (p = t_next(m, p, &l); p && l < *pos; p = t_next(m, p, &l)) - ; - } else { - l = *pos; - p = t_next(m, p, &l); - } + if (*pos > iter->pos) + *pos = iter->pos; + + l = *pos; + p = t_next(m, p, &l); return p; } @@ -770,15 +768,21 @@ static void t_stop(struct seq_file *m, void *p) static int t_show(struct seq_file *m, void *v) { + struct ftrace_iterator *iter = m->private; struct dyn_ftrace *rec = v; char str[KSYM_SYMBOL_LEN]; + int ret = 0; if (!rec) return 0; kallsyms_lookup(rec->ip, NULL, NULL, NULL, str); - seq_printf(m, "%s\n", str); + ret = seq_printf(m, "%s\n", str); + if (ret < 0) { + iter->pos--; + iter->idx--; + } return 0; } @@ -804,7 +808,7 @@ ftrace_avail_open(struct inode *inode, struct file *file) return -ENOMEM; iter->pg = ftrace_pages_start; - iter->pos = -1; + iter->pos = 0; ret = seq_open(file, &show_ftrace_seq_ops); if (!ret) { @@ -891,7 +895,7 @@ ftrace_regex_open(struct inode *inode, struct file *file, int enable) if (file->f_mode & FMODE_READ) { iter->pg = ftrace_pages_start; - iter->pos = -1; + iter->pos = 0; iter->flags = enable ? FTRACE_ITER_FILTER : FTRACE_ITER_NOTRACE; -- cgit v1.2.3-70-g09d2 From 5f5c4bdb144bf285727867bbd75c13c5a99150c9 Mon Sep 17 00:00:00 2001 From: Joey Zhuo Date: Sun, 16 Nov 2008 00:39:35 -0800 Subject: via-velocity: enable perfect filtering for multicast packets Signed-off-by: Joey Zhuo Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/via-velocity.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 3590ea5a902..11cb3e504e1 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -2296,7 +2296,7 @@ static void velocity_set_multi(struct net_device *dev) } mac_set_cam_mask(regs, vptr->mCAMmask); - rx_mode = (RCR_AM | RCR_AB); + rx_mode = RCR_AM | RCR_AB | RCR_AP; } if (dev->mtu > 1500) rx_mode |= RCR_AL; -- cgit v1.2.3-70-g09d2 From 6ff68026f4757d68461b7fbeca5c944e1f5f8b44 Mon Sep 17 00:00:00 2001 From: "\\\"Rafael J. Wysocki\\" Date: Wed, 12 Nov 2008 09:52:32 +0000 Subject: e1000e: Use device_set_wakeup_enable Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using e1000_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ethtool.c | 8 ++++++-- drivers/net/e1000e/netdev.c | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 70c11c811a0..62421ce9631 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1713,7 +1713,8 @@ static void e1000_get_wol(struct net_device *netdev, wol->supported = 0; wol->wolopts = 0; - if (!(adapter->flags & FLAG_HAS_WOL)) + if (!(adapter->flags & FLAG_HAS_WOL) || + !device_can_wakeup(&adapter->pdev->dev)) return; wol->supported = WAKE_UCAST | WAKE_MCAST | @@ -1751,7 +1752,8 @@ static int e1000_set_wol(struct net_device *netdev, if (wol->wolopts & WAKE_MAGICSECURE) return -EOPNOTSUPP; - if (!(adapter->flags & FLAG_HAS_WOL)) + if (!(adapter->flags & FLAG_HAS_WOL) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; /* these settings will always override what we currently have */ @@ -1770,6 +1772,8 @@ static int e1000_set_wol(struct net_device *netdev, if (wol->wolopts & WAKE_ARP) adapter->wol |= E1000_WUFC_ARP; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index abd492b7336..2c8dffdc889 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4970,6 +4970,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* reset the hardware with the new settings */ e1000e_reset(adapter); -- cgit v1.2.3-70-g09d2 From de1264896c8012a261c1cba17e6a61199c276ad3 Mon Sep 17 00:00:00 2001 From: "\\\"Rafael J. Wysocki\\" Date: Fri, 7 Nov 2008 20:30:19 +0000 Subject: e1000: Use device_set_wakeup_enable Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using e1000_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_ethtool.c | 8 ++++++-- drivers/net/e1000/e1000_main.c | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 6a3893acfe0..c854c96f5ab 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1774,7 +1774,8 @@ static void e1000_get_wol(struct net_device *netdev, /* this function will set ->supported = 0 and return 1 if wol is not * supported by this hardware */ - if (e1000_wol_exclusion(adapter, wol)) + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; /* apply any specific unsupported masks here */ @@ -1811,7 +1812,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; - if (e1000_wol_exclusion(adapter, wol)) + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; switch (hw->device_id) { @@ -1838,6 +1840,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index fac82152e4c..872799b746f 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1179,6 +1179,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* print bus type/speed/width info */ DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ", -- cgit v1.2.3-70-g09d2 From e1b86d8479f90aadee57a3d07d8e61c815c202d9 Mon Sep 17 00:00:00 2001 From: "\\\"Rafael J. Wysocki\\" Date: Fri, 7 Nov 2008 20:30:37 +0000 Subject: igb: Use device_set_wakeup_enable Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using igb_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_ethtool.c | 8 ++++++-- drivers/net/igb/igb_main.c | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index 58906c984be..89964fa739a 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -1776,7 +1776,8 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) /* this function will set ->supported = 0 and return 1 if wol is not * supported by this hardware */ - if (igb_wol_exclusion(adapter, wol)) + if (igb_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; /* apply any specific unsupported masks here */ @@ -1805,7 +1806,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; - if (igb_wol_exclusion(adapter, wol)) + if (igb_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; switch (hw->device_id) { @@ -1825,6 +1827,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 1f397cd9941..0a9801516ae 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1244,6 +1244,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* reset the hardware with the new settings */ igb_reset(adapter); -- cgit v1.2.3-70-g09d2 From 0f807044980dd51fdf9aa2df8d503d4757501b20 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Tue, 11 Nov 2008 07:54:54 +0000 Subject: qla3xxx: Cleanup: Fix link print statements. Removed debug print statements and improved conditionals around informational statements. Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- drivers/net/qla3xxx.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 3cdd07c45b6..508452c0215 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -1515,9 +1515,6 @@ static u32 ql_get_link_state(struct ql3_adapter *qdev) linkState = LS_UP; } else { linkState = LS_DOWN; - if (netif_msg_link(qdev)) - printk(KERN_WARNING PFX - "%s: Link is down.\n", qdev->ndev->name); } return linkState; } @@ -1581,10 +1578,6 @@ static int ql_finish_auto_neg(struct ql3_adapter *qdev) ql_mac_enable(qdev, 1); } - if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: Change port_link_state LS_DOWN to LS_UP.\n", - qdev->ndev->name); qdev->port_link_state = LS_UP; netif_start_queue(qdev->ndev); netif_carrier_on(qdev->ndev); @@ -1655,14 +1648,9 @@ static void ql_link_state_machine_work(struct work_struct *work) /* Fall Through */ case LS_DOWN: - if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: port_link_state = LS_DOWN.\n", - qdev->ndev->name); if (curr_link_state == LS_UP) { if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: curr_link_state = LS_UP.\n", + printk(KERN_INFO PFX "%s: Link is up.\n", qdev->ndev->name); if (ql_is_auto_neg_complete(qdev)) ql_finish_auto_neg(qdev); @@ -1670,6 +1658,7 @@ static void ql_link_state_machine_work(struct work_struct *work) if (qdev->port_link_state == LS_UP) ql_link_down_detect_clear(qdev); + qdev->port_link_state = LS_UP; } break; @@ -1678,12 +1667,14 @@ static void ql_link_state_machine_work(struct work_struct *work) * See if the link is currently down or went down and came * back up */ - if ((curr_link_state == LS_DOWN) || ql_link_down_detect(qdev)) { + if (curr_link_state == LS_DOWN) { if (netif_msg_link(qdev)) printk(KERN_INFO PFX "%s: Link is down.\n", qdev->ndev->name); qdev->port_link_state = LS_DOWN; } + if (ql_link_down_detect(qdev)) + qdev->port_link_state = LS_DOWN; break; } spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); -- cgit v1.2.3-70-g09d2 From ac450208dea8cf1b9aa8feabd06a7209a282d749 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 13 Nov 2008 06:20:10 +0000 Subject: igb: use dev_printk instead of printk Use dev_printk() instead of printk() to give a little more context and use consistent format. Signed-off-by: Bjorn Helgaas Signed-off-by: David S. Miller --- drivers/net/igb/igb_main.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 0a9801516ae..1cbae85b142 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1019,10 +1019,9 @@ static int __devinit igb_probe(struct pci_dev *pdev, state &= ~PCIE_LINK_STATE_L0S; pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL, state); - printk(KERN_INFO "Disabling ASPM L0s upstream switch " - "port %x:%x.%x\n", us_dev->bus->number, - PCI_SLOT(us_dev->devfn), - PCI_FUNC(us_dev->devfn)); + dev_info(&pdev->dev, + "Disabling ASPM L0s upstream switch port %s\n", + pci_name(us_dev)); } default: break; -- cgit v1.2.3-70-g09d2 From 773c9c1f77174429ad2feb1735a3beb33ff3b6c0 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Fri, 14 Nov 2008 13:51:54 +0000 Subject: e100: fix dma error in direction for mapping The e100 driver triggers BUG_ON(buf->direction != dir) by doing pci_map_single(..., PCI_DMA_BIDIRECTIONAL) and pci_dma_sync_single_for_device(..., PCI_DMA_TODEVICE). Changing the DMA direction, especially with dmabounce will result in unexpected behaviour. Reported-by: Anders Grafstrom Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e100.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 3d69fae781c..e8bfcce6b31 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -166,7 +166,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.5.23-k4"DRV_EXT +#define DRV_VERSION "3.5.23-k6"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation" #define PFX DRV_NAME ": " @@ -1804,7 +1804,7 @@ static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx) struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data; put_unaligned_le32(rx->dma_addr, &prev_rfd->link); pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr, - sizeof(struct rfd), PCI_DMA_TODEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); } return 0; @@ -1823,7 +1823,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Need to sync before taking a peek at cb_complete bit */ pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr, - sizeof(struct rfd), PCI_DMA_FROMDEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); rfd_status = le16_to_cpu(rfd->status); DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status); @@ -1850,7 +1850,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Get data */ pci_unmap_single(nic->pdev, rx->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); /* If this buffer has the el bit, but we think the receiver * is still running, check to see if it really stopped while @@ -1943,7 +1943,7 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done, new_before_last_rfd->command |= cpu_to_le16(cb_el); pci_dma_sync_single_for_device(nic->pdev, new_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); /* Now that we have a new stopping point, we can clear the old * stopping point. We must sync twice to get the proper @@ -1951,11 +1951,11 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done, old_before_last_rfd->command &= ~cpu_to_le16(cb_el); pci_dma_sync_single_for_device(nic->pdev, old_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN); pci_dma_sync_single_for_device(nic->pdev, old_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); } if(restart_required) { @@ -1978,7 +1978,7 @@ static void e100_rx_clean_list(struct nic *nic) for(rx = nic->rxs, i = 0; i < count; rx++, i++) { if(rx->skb) { pci_unmap_single(nic->pdev, rx->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); dev_kfree_skb(rx->skb); } } @@ -2021,7 +2021,7 @@ static int e100_rx_alloc_list(struct nic *nic) before_last->command |= cpu_to_le16(cb_el); before_last->size = 0; pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr, - sizeof(struct rfd), PCI_DMA_TODEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); nic->rx_to_use = nic->rx_to_clean = nic->rxs; nic->ru_running = RU_SUSPENDED; @@ -2222,7 +2222,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) msleep(10); pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd), skb->data, ETH_DATA_LEN)) -- cgit v1.2.3-70-g09d2 From 3ee82383f0098a2e13acc8cf1be8e47512f41e5a Mon Sep 17 00:00:00 2001 From: Giulio Benetti Date: Thu, 13 Nov 2008 21:53:13 +0000 Subject: phy: fix phy address bug PHYID returns 0xffff and not 0xffffffff when not found and in some case(at91sam9263) 0x0. Maybe this patch could be useful. Signed-off-by: Giulio Benetti Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index e11b03b2b25..8fb1faca883 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -227,8 +227,8 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) if (r) return ERR_PTR(r); - /* If the phy_id is all Fs, there is no device there */ - if (0xffffffff == phy_id) + /* If the phy_id is all Fs or all 0s, there is no device there */ + if ((0xffff == phy_id) || (0x00 == phy_id)) return NULL; dev = phy_device_create(bus, addr, phy_id); -- cgit v1.2.3-70-g09d2 From 77fb61a04a0483ad274ce5c51b02c46c12db3693 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 16 Nov 2008 10:09:34 -0800 Subject: acpi: fix oops in acpi_system_wakeup_device_seq_show MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 0794469da3f7b2093575cbdfc1108308dd3641ce: ("ACPI: struct device - replace bus_id with dev_name(), dev_set_name()") introduced a bug by testing 'dev_name(ldev)' instead of 'ldev->bus' for NULL when printing out the bus information. So if ldev->bus was NULL, we'd oops. Reported-and-tested-by: Bruno Prmont Cc: Kay Sievers Cc: Len Brown Cc: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/acpi/sleep/proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 64e591ba86f..4dbc2271acf 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -366,7 +366,7 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) dev->wakeup.state.enabled ? "enabled" : "disabled"); if (ldev) seq_printf(seq, "%s:%s", - dev_name(ldev) ? ldev->bus->name : "no-bus", + ldev->bus ? ldev->bus->name : "no-bus", dev_name(ldev)); seq_printf(seq, "\n"); put_device(ldev); -- cgit v1.2.3-70-g09d2 From b1ccbdc4a2af5ffcd6082c3a7a6fbd0e134031f2 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Sat, 8 Nov 2008 01:28:19 +0100 Subject: mfd: fix event masking for da9030 Signed-off-by: Mike Rapoport Acked-by: Eric Miao Signed-off-by: Samuel Ortiz --- drivers/mfd/da903x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c index b57326ae464..0b5bd85dfce 100644 --- a/drivers/mfd/da903x.c +++ b/drivers/mfd/da903x.c @@ -267,7 +267,7 @@ static int da9030_mask_events(struct da903x_chip *chip, unsigned int events) { uint8_t v[3]; - chip->events_mask &= ~events; + chip->events_mask |= events; v[0] = (chip->events_mask & 0xff); v[1] = (chip->events_mask >> 8) & 0xff; -- cgit v1.2.3-70-g09d2 From 898d8054ec0cb5ba0ec1b15c78042a23ed103c02 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 12 Nov 2008 17:34:02 +0100 Subject: mfd: Correct WM8350 I2C return code usage The vendor BSP used for the WM8350 development provided an I2C driver which incorrectly returned zero on succesful sends rather than the number of transmitted bytes, an error which was then propagated into the WM8350 I2C accessors. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-i2c.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c index 8dfe21bb3bd..3e0ce0e50ea 100644 --- a/drivers/mfd/wm8350-i2c.c +++ b/drivers/mfd/wm8350-i2c.c @@ -30,7 +30,12 @@ static int wm8350_i2c_read_device(struct wm8350 *wm8350, char reg, ret = i2c_master_send(wm8350->i2c_client, ®, 1); if (ret < 0) return ret; - return i2c_master_recv(wm8350->i2c_client, dest, bytes); + ret = i2c_master_recv(wm8350->i2c_client, dest, bytes); + if (ret < 0) + return ret; + if (ret != bytes) + return -EIO; + return 0; } static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg, @@ -38,13 +43,19 @@ static int wm8350_i2c_write_device(struct wm8350 *wm8350, char reg, { /* we add 1 byte for device register */ u8 msg[(WM8350_MAX_REGISTER << 1) + 1]; + int ret; if (bytes > ((WM8350_MAX_REGISTER << 1) + 1)) return -EINVAL; msg[0] = reg; memcpy(&msg[1], src, bytes); - return i2c_master_send(wm8350->i2c_client, msg, bytes + 1); + ret = i2c_master_send(wm8350->i2c_client, msg, bytes + 1); + if (ret < 0) + return ret; + if (ret != bytes + 1) + return -EIO; + return 0; } static int wm8350_i2c_probe(struct i2c_client *i2c, -- cgit v1.2.3-70-g09d2 From 5c06fe772da43db63b053addcd2c267f76d0be91 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 16 Nov 2008 22:19:10 +0000 Subject: Fix broken ownership of /proc/sys/ files D'oh... Signed-off-by: Al Viro Reported-and-tested-by: Peter Palfrader Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/proc/proc_sysctl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c index 94fcfff6863..06ed10b7da9 100644 --- a/fs/proc/proc_sysctl.c +++ b/fs/proc/proc_sysctl.c @@ -31,6 +31,7 @@ static struct inode *proc_sys_make_inode(struct super_block *sb, inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME; inode->i_flags |= S_PRIVATE; /* tell selinux to ignore this inode */ inode->i_mode = table->mode; + inode->i_uid = inode->i_gid = 0; if (!table->child) { inode->i_mode |= S_IFREG; inode->i_op = &proc_sys_inode_operations; -- cgit v1.2.3-70-g09d2 From e14c8bf86350f6c39186a139c5c584a6111b2f01 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 17 Nov 2008 08:22:18 +1030 Subject: stop_machine: fix race with return value (fixes Bug #11989) Bug #11989: Suspend failure on NForce4-based boards due to chanes in stop_machine We should not access active.fnret outside the lock; in theory the next stop_machine could overwrite it. Signed-off-by: Rusty Russell Tested-by: "Rafael J. Wysocki" Signed-off-by: Linus Torvalds --- kernel/stop_machine.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c index 9bc4c00872c..24e8ceacc38 100644 --- a/kernel/stop_machine.c +++ b/kernel/stop_machine.c @@ -112,7 +112,7 @@ static int chill(void *unused) int __stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus) { struct work_struct *sm_work; - int i; + int i, ret; /* Set up initial state. */ mutex_lock(&lock); @@ -137,8 +137,9 @@ int __stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus) /* This will release the thread on our CPU. */ put_cpu(); flush_workqueue(stop_machine_wq); + ret = active.fnret; mutex_unlock(&lock); - return active.fnret; + return ret; } int stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus) -- cgit v1.2.3-70-g09d2 From 72eb8c6747b49e41fd2b042510f03ac7c13426fc Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 17 Nov 2008 00:30:57 +0100 Subject: unitialized return value in mm/mlock.c: __mlock_vma_pages_range() Fix an unitialized return value when compiling on parisc (with CONFIG_UNEVICTABLE_LRU=y): mm/mlock.c: In function `__mlock_vma_pages_range': mm/mlock.c:165: warning: `ret' might be used uninitialized in this function Signed-off-by: Helge Deller [ It isn't ever really used uninitialized, since no caller should ever call this function with an empty range. But the compiler is correct that from a local analysis standpoint that is impossible to see, and fixing the warning is appropriate. ] Signed-off-by: Linus Torvalds --- mm/mlock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/mlock.c b/mm/mlock.c index a6da2aee940..1ada366570c 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -162,7 +162,7 @@ static long __mlock_vma_pages_range(struct vm_area_struct *vma, unsigned long addr = start; struct page *pages[16]; /* 16 gives a reasonable batch */ int nr_pages = (end - start) / PAGE_SIZE; - int ret; + int ret = 0; int gup_flags = 0; VM_BUG_ON(start & ~PAGE_MASK); -- cgit v1.2.3-70-g09d2 From e82f54ba030b429c06b5240cbe7eeaaa03a8db11 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 14 Nov 2008 06:45:07 +0000 Subject: e1000e: fix warn_on reload after phy_id error If the driver fails to initialize the first time due to the failure in the phy_id check the kernel triggers a warn_on on the second try to load the driver because the driver did not free the msi/x resources in the first load because of the previous failure in phy_id check. Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 2c8dffdc889..f6ebebb8cfa 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -5009,6 +5009,7 @@ err_hw_init: err_sw_init: if (adapter->hw.flash_address) iounmap(adapter->hw.flash_address); + e1000e_reset_interrupt_capability(adapter); err_flashmap: iounmap(adapter->hw.hw_addr); err_ioremap: -- cgit v1.2.3-70-g09d2 From eb7c3adb1ca92450870dbb0d347fc986cd5e2af4 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 14 Nov 2008 06:45:23 +0000 Subject: e1000e: fix IPMI traffic Some users reported that they have machines with BMCs enabled that cannot receive IPMI traffic after e1000e is loaded. http://marc.info/?l=e1000-devel&m=121909039127414&w=2 http://marc.info/?l=e1000-devel&m=121365543823387&w=2 This fixes the issue if they load with the new parameter = 0 by disabling crc stripping, but leaves the performance feature on for most users. Based on work done by Hong Zhang. Signed-off-by: Jeff Kirsher Signed-off-by: Jesse Brandeburg Signed-off-by: David S. Miller --- drivers/net/e1000e/e1000.h | 5 +++++ drivers/net/e1000e/netdev.c | 23 +++++++++++++++++++++-- drivers/net/e1000e/param.c | 25 +++++++++++++++++++++++++ 3 files changed, 51 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index c55de1c027a..c55fd6fdb91 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -299,6 +299,7 @@ struct e1000_adapter { unsigned long led_status; unsigned int flags; + unsigned int flags2; struct work_struct downshift_task; struct work_struct update_phy_task; }; @@ -306,6 +307,7 @@ struct e1000_adapter { struct e1000_info { enum e1000_mac_type mac; unsigned int flags; + unsigned int flags2; u32 pba; s32 (*get_variants)(struct e1000_adapter *); struct e1000_mac_operations *mac_ops; @@ -347,6 +349,9 @@ struct e1000_info { #define FLAG_RX_RESTART_NOW (1 << 30) #define FLAG_MSI_TEST_FAILED (1 << 31) +/* CRC Stripping defines */ +#define FLAG2_CRC_STRIPPING (1 << 0) + #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) #define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i])) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index f6ebebb8cfa..91795f78c3e 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -499,6 +499,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, goto next_desc; } + /* adjust length to remove Ethernet CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + length -= 4; + total_rx_bytes += length; total_rx_packets++; @@ -804,6 +808,10 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, pci_dma_sync_single_for_device(pdev, ps_page->dma, PAGE_SIZE, PCI_DMA_FROMDEVICE); + /* remove the CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + l1 -= 4; + skb_put(skb, l1); goto copydone; } /* if */ @@ -825,6 +833,12 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, skb->truesize += length; } + /* strip the ethernet crc, problem is we're using pages now so + * this whole operation can get a little cpu intensive + */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + pskb_trim(skb, skb->len - 4); + copydone: total_rx_bytes += skb->len; total_rx_packets++; @@ -2301,8 +2315,12 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) else rctl |= E1000_RCTL_LPE; - /* Enable hardware CRC frame stripping */ - rctl |= E1000_RCTL_SECRC; + /* Some systems expect that the CRC is included in SMBUS traffic. The + * hardware strips the CRC before sending to both SMBUS (BMC) and to + * host memory when this is enabled + */ + if (adapter->flags2 & FLAG2_CRC_STRIPPING) + rctl |= E1000_RCTL_SECRC; /* Setup buffer sizes */ rctl &= ~E1000_RCTL_SZ_4096; @@ -4766,6 +4784,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->ei = ei; adapter->pba = ei->pba; adapter->flags = ei->flags; + adapter->flags2 = ei->flags2; adapter->hw.adapter = adapter; adapter->hw.mac.type = ei->mac; adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index 77a3d7207a5..e909f96698e 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -151,6 +151,16 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); */ E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]"); +/* + * Enable CRC Stripping + * + * Valid Range: 0, 1 + * + * Default Value: 1 (enabled) + */ +E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \ + "the CRC"); + struct e1000_option { enum { enable_option, range_option, list_option } type; const char *name; @@ -404,6 +414,21 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) adapter->flags |= FLAG_SMART_POWER_DOWN; } } + { /* CRC Stripping */ + const struct e1000_option opt = { + .type = enable_option, + .name = "CRC Stripping", + .err = "defaulting to enabled", + .def = OPTION_ENABLED + }; + + if (num_CrcStripping > bd) { + unsigned int crc_stripping = CrcStripping[bd]; + e1000_validate_option(&crc_stripping, &opt, adapter); + if (crc_stripping == OPTION_ENABLED) + adapter->flags2 |= FLAG2_CRC_STRIPPING; + } + } { /* Kumeran Lock Loss Workaround */ const struct e1000_option opt = { .type = enable_option, -- cgit v1.2.3-70-g09d2 From f1987b44f642e96176adc88b7ce23a1d74806f89 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 15 Nov 2008 11:12:47 -0500 Subject: cifs: reinstate sharing of tree connections Use a similar approach to the SMB session sharing. Add a list of tcons attached to each SMB session. Move the refcount to non-atomic. Protect all of the above with the cifs_tcp_ses_lock. Add functions to properly find and put references to the tcons. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_debug.c | 236 ++++++++++++++++++++++++++++----------------------- fs/cifs/cifsfs.c | 8 +- fs/cifs/cifsglob.h | 13 +-- fs/cifs/cifssmb.c | 43 +++------- fs/cifs/connect.c | 93 +++++++++++++------- fs/cifs/misc.c | 74 ++++++++-------- 6 files changed, 249 insertions(+), 218 deletions(-) diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 59841a68b0b..1d6dfa8923c 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -107,12 +107,13 @@ void cifs_dump_mids(struct TCP_Server_Info *server) #ifdef CONFIG_PROC_FS static int cifs_debug_data_proc_show(struct seq_file *m, void *v) { - struct list_head *tmp, *tmp2, *tmp3; + struct list_head *tmp1, *tmp2, *tmp3; struct mid_q_entry *mid_entry; struct TCP_Server_Info *server; struct cifsSesInfo *ses; struct cifsTconInfo *tcon; - int i; + int i, j; + __u32 dev_type; seq_puts(m, "Display Internal CIFS Data Structures for Debugging\n" @@ -123,8 +124,8 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) i = 0; read_lock(&cifs_tcp_ses_lock); - list_for_each(tmp, &cifs_tcp_ses_list) { - server = list_entry(tmp, struct TCP_Server_Info, + list_for_each(tmp1, &cifs_tcp_ses_list) { + server = list_entry(tmp1, struct TCP_Server_Info, tcp_ses_list); i++; list_for_each(tmp2, &server->smb_ses_list) { @@ -133,12 +134,12 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) if ((ses->serverDomain == NULL) || (ses->serverOS == NULL) || (ses->serverNOS == NULL)) { - seq_printf(m, "\nentry for %s not fully " - "displayed\n\t", ses->serverName); + seq_printf(m, "\n%d) entry for %s not fully " + "displayed\n\t", i, ses->serverName); } else { seq_printf(m, - "\n%d) Name: %s Domain: %s Mounts: %d OS:" - " %s \n\tNOS: %s\tCapability: 0x%x\n\tSMB" + "\n%d) Name: %s Domain: %s Uses: %d OS:" + " %s\n\tNOS: %s\tCapability: 0x%x\n\tSMB" " session status: %d\t", i, ses->serverName, ses->serverDomain, ses->ses_count, ses->serverOS, ses->serverNOS, @@ -156,14 +157,44 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) atomic_read(&server->num_waiters)); #endif - seq_puts(m, "\nMIDs:\n"); + seq_puts(m, "\n\tShares:"); + j = 0; + list_for_each(tmp3, &ses->tcon_list) { + tcon = list_entry(tmp3, struct cifsTconInfo, + tcon_list); + ++j; + dev_type = le32_to_cpu(tcon->fsDevInfo.DeviceType); + seq_printf(m, "\n\t%d) %s Mounts: %d ", j, + tcon->treeName, tcon->tc_count); + if (tcon->nativeFileSystem) { + seq_printf(m, "Type: %s ", + tcon->nativeFileSystem); + } + seq_printf(m, "DevInfo: 0x%x Attributes: 0x%x" + "\nPathComponentMax: %d Status: 0x%d", + le32_to_cpu(tcon->fsDevInfo.DeviceCharacteristics), + le32_to_cpu(tcon->fsAttrInfo.Attributes), + le32_to_cpu(tcon->fsAttrInfo.MaxPathNameComponentLength), + tcon->tidStatus); + if (dev_type == FILE_DEVICE_DISK) + seq_puts(m, " type: DISK "); + else if (dev_type == FILE_DEVICE_CD_ROM) + seq_puts(m, " type: CDROM "); + else + seq_printf(m, " type: %d ", dev_type); + + if (tcon->need_reconnect) + seq_puts(m, "\tDISCONNECTED "); + seq_putc(m, '\n'); + } + + seq_puts(m, "\n\tMIDs:\n"); spin_lock(&GlobalMid_Lock); list_for_each(tmp3, &server->pending_mid_q) { - mid_entry = list_entry(tmp3, struct - mid_q_entry, + mid_entry = list_entry(tmp3, struct mid_q_entry, qhead); - seq_printf(m, "State: %d com: %d pid:" + seq_printf(m, "\tState: %d com: %d pid:" " %d tsk: %p mid %d\n", mid_entry->midState, (int)mid_entry->command, @@ -177,41 +208,6 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) read_unlock(&cifs_tcp_ses_lock); seq_putc(m, '\n'); - seq_puts(m, "Shares:"); - - i = 0; - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalTreeConnectionList) { - __u32 dev_type; - i++; - tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); - dev_type = le32_to_cpu(tcon->fsDevInfo.DeviceType); - seq_printf(m, "\n%d) %s Uses: %d ", i, - tcon->treeName, atomic_read(&tcon->useCount)); - if (tcon->nativeFileSystem) { - seq_printf(m, "Type: %s ", - tcon->nativeFileSystem); - } - seq_printf(m, "DevInfo: 0x%x Attributes: 0x%x" - "\nPathComponentMax: %d Status: %d", - le32_to_cpu(tcon->fsDevInfo.DeviceCharacteristics), - le32_to_cpu(tcon->fsAttrInfo.Attributes), - le32_to_cpu(tcon->fsAttrInfo.MaxPathNameComponentLength), - tcon->tidStatus); - if (dev_type == FILE_DEVICE_DISK) - seq_puts(m, " type: DISK "); - else if (dev_type == FILE_DEVICE_CD_ROM) - seq_puts(m, " type: CDROM "); - else - seq_printf(m, " type: %d ", dev_type); - - if (tcon->need_reconnect) - seq_puts(m, "\tDISCONNECTED "); - } - read_unlock(&GlobalSMBSeslock); - - seq_putc(m, '\n'); - /* BB add code to dump additional info such as TCP session info now */ return 0; } @@ -235,7 +231,9 @@ static ssize_t cifs_stats_proc_write(struct file *file, { char c; int rc; - struct list_head *tmp; + struct list_head *tmp1, *tmp2, *tmp3; + struct TCP_Server_Info *server; + struct cifsSesInfo *ses; struct cifsTconInfo *tcon; rc = get_user(c, buffer); @@ -243,33 +241,42 @@ static ssize_t cifs_stats_proc_write(struct file *file, return rc; if (c == '1' || c == 'y' || c == 'Y' || c == '0') { - read_lock(&GlobalSMBSeslock); #ifdef CONFIG_CIFS_STATS2 atomic_set(&totBufAllocCount, 0); atomic_set(&totSmBufAllocCount, 0); #endif /* CONFIG_CIFS_STATS2 */ - list_for_each(tmp, &GlobalTreeConnectionList) { - tcon = list_entry(tmp, struct cifsTconInfo, - cifsConnectionList); - atomic_set(&tcon->num_smbs_sent, 0); - atomic_set(&tcon->num_writes, 0); - atomic_set(&tcon->num_reads, 0); - atomic_set(&tcon->num_oplock_brks, 0); - atomic_set(&tcon->num_opens, 0); - atomic_set(&tcon->num_closes, 0); - atomic_set(&tcon->num_deletes, 0); - atomic_set(&tcon->num_mkdirs, 0); - atomic_set(&tcon->num_rmdirs, 0); - atomic_set(&tcon->num_renames, 0); - atomic_set(&tcon->num_t2renames, 0); - atomic_set(&tcon->num_ffirst, 0); - atomic_set(&tcon->num_fnext, 0); - atomic_set(&tcon->num_fclose, 0); - atomic_set(&tcon->num_hardlinks, 0); - atomic_set(&tcon->num_symlinks, 0); - atomic_set(&tcon->num_locks, 0); + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp1, &cifs_tcp_ses_list) { + server = list_entry(tmp1, struct TCP_Server_Info, + tcp_ses_list); + list_for_each(tmp2, &server->smb_session_list) { + ses = list_entry(tmp2, struct cifsSesInfo, + smb_session_list); + list_for_each(tmp3, &ses->tcon_list) { + tcon = list_entry(tmp3, + struct cifsTconInfo, + tcon_list); + atomic_set(&tcon->num_smbs_sent, 0); + atomic_set(&tcon->num_writes, 0); + atomic_set(&tcon->num_reads, 0); + atomic_set(&tcon->num_oplock_brks, 0); + atomic_set(&tcon->num_opens, 0); + atomic_set(&tcon->num_closes, 0); + atomic_set(&tcon->num_deletes, 0); + atomic_set(&tcon->num_mkdirs, 0); + atomic_set(&tcon->num_rmdirs, 0); + atomic_set(&tcon->num_renames, 0); + atomic_set(&tcon->num_t2renames, 0); + atomic_set(&tcon->num_ffirst, 0); + atomic_set(&tcon->num_fnext, 0); + atomic_set(&tcon->num_fclose, 0); + atomic_set(&tcon->num_hardlinks, 0); + atomic_set(&tcon->num_symlinks, 0); + atomic_set(&tcon->num_locks, 0); + } + } } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); } return count; @@ -278,7 +285,9 @@ static ssize_t cifs_stats_proc_write(struct file *file, static int cifs_stats_proc_show(struct seq_file *m, void *v) { int i; - struct list_head *tmp; + struct list_head *tmp1, *tmp2, *tmp3; + struct TCP_Server_Info *server; + struct cifsSesInfo *ses; struct cifsTconInfo *tcon; seq_printf(m, @@ -307,44 +316,55 @@ static int cifs_stats_proc_show(struct seq_file *m, void *v) GlobalCurrentXid, GlobalMaxActiveXid); i = 0; - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalTreeConnectionList) { - i++; - tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); - seq_printf(m, "\n%d) %s", i, tcon->treeName); - if (tcon->need_reconnect) - seq_puts(m, "\tDISCONNECTED "); - seq_printf(m, "\nSMBs: %d Oplock Breaks: %d", - atomic_read(&tcon->num_smbs_sent), - atomic_read(&tcon->num_oplock_brks)); - seq_printf(m, "\nReads: %d Bytes: %lld", - atomic_read(&tcon->num_reads), - (long long)(tcon->bytes_read)); - seq_printf(m, "\nWrites: %d Bytes: %lld", - atomic_read(&tcon->num_writes), - (long long)(tcon->bytes_written)); - seq_printf(m, - "\nLocks: %d HardLinks: %d Symlinks: %d", - atomic_read(&tcon->num_locks), - atomic_read(&tcon->num_hardlinks), - atomic_read(&tcon->num_symlinks)); - - seq_printf(m, "\nOpens: %d Closes: %d Deletes: %d", - atomic_read(&tcon->num_opens), - atomic_read(&tcon->num_closes), - atomic_read(&tcon->num_deletes)); - seq_printf(m, "\nMkdirs: %d Rmdirs: %d", - atomic_read(&tcon->num_mkdirs), - atomic_read(&tcon->num_rmdirs)); - seq_printf(m, "\nRenames: %d T2 Renames %d", - atomic_read(&tcon->num_renames), - atomic_read(&tcon->num_t2renames)); - seq_printf(m, "\nFindFirst: %d FNext %d FClose %d", - atomic_read(&tcon->num_ffirst), - atomic_read(&tcon->num_fnext), - atomic_read(&tcon->num_fclose)); + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp1, &cifs_tcp_ses_list) { + server = list_entry(tmp1, struct TCP_Server_Info, + tcp_ses_list); + list_for_each(tmp2, &server->smb_ses_list) { + ses = list_entry(tmp2, struct cifsSesInfo, + smb_ses_list); + list_for_each(tmp3, &ses->tcon_list) { + tcon = list_entry(tmp3, + struct cifsTconInfo, + tcon_list); + i++; + seq_printf(m, "\n%d) %s", i, tcon->treeName); + if (tcon->need_reconnect) + seq_puts(m, "\tDISCONNECTED "); + seq_printf(m, "\nSMBs: %d Oplock Breaks: %d", + atomic_read(&tcon->num_smbs_sent), + atomic_read(&tcon->num_oplock_brks)); + seq_printf(m, "\nReads: %d Bytes: %lld", + atomic_read(&tcon->num_reads), + (long long)(tcon->bytes_read)); + seq_printf(m, "\nWrites: %d Bytes: %lld", + atomic_read(&tcon->num_writes), + (long long)(tcon->bytes_written)); + seq_printf(m, "\nLocks: %d HardLinks: %d " + "Symlinks: %d", + atomic_read(&tcon->num_locks), + atomic_read(&tcon->num_hardlinks), + atomic_read(&tcon->num_symlinks)); + seq_printf(m, "\nOpens: %d Closes: %d" + "Deletes: %d", + atomic_read(&tcon->num_opens), + atomic_read(&tcon->num_closes), + atomic_read(&tcon->num_deletes)); + seq_printf(m, "\nMkdirs: %d Rmdirs: %d", + atomic_read(&tcon->num_mkdirs), + atomic_read(&tcon->num_rmdirs)); + seq_printf(m, "\nRenames: %d T2 Renames %d", + atomic_read(&tcon->num_renames), + atomic_read(&tcon->num_t2renames)); + seq_printf(m, "\nFindFirst: %d FNext %d " + "FClose %d", + atomic_read(&tcon->num_ffirst), + atomic_read(&tcon->num_fnext), + atomic_read(&tcon->num_fclose)); + } + } } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); seq_putc(m, '\n'); return 0; diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index a1e96620b09..d9cf467309e 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -514,10 +514,11 @@ static void cifs_umount_begin(struct super_block *sb) tcon = cifs_sb->tcon; if (tcon == NULL) return; - down(&tcon->tconSem); - if (atomic_read(&tcon->useCount) == 1) + + read_lock(&cifs_tcp_ses_lock); + if (tcon->tc_count == 1) tcon->tidStatus = CifsExiting; - up(&tcon->tconSem); + read_unlock(&cifs_tcp_ses_lock); /* cancel_brl_requests(tcon); */ /* BB mark all brl mids as exiting */ /* cancel_notify_requests(tcon); */ @@ -1060,7 +1061,6 @@ init_cifs(void) int rc = 0; cifs_proc_init(); INIT_LIST_HEAD(&cifs_tcp_ses_list); - INIT_LIST_HEAD(&GlobalTreeConnectionList); /* BB to be removed by jl */ INIT_LIST_HEAD(&GlobalOplock_Q); #ifdef CONFIG_CIFS_EXPERIMENTAL INIT_LIST_HEAD(&GlobalDnotifyReqList); diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 631a99f72f2..f1ae1f57c30 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -233,16 +233,15 @@ struct cifsSesInfo { * session */ struct cifsTconInfo { - struct list_head cifsConnectionList; + struct list_head tcon_list; + int tc_count; struct list_head openFileList; - struct semaphore tconSem; struct cifsSesInfo *ses; /* pointer to session associated with */ char treeName[MAX_TREE_SIZE + 1]; /* UNC name of resource in ASCII */ char *nativeFileSystem; __u16 tid; /* The 2 byte tree id */ __u16 Flags; /* optional support bits */ enum statusEnum tidStatus; - atomic_t useCount; /* how many explicit/implicit mounts to share */ #ifdef CONFIG_CIFS_STATS atomic_t num_smbs_sent; atomic_t num_writes; @@ -600,9 +599,13 @@ require use of the stronger protocol */ */ GLOBAL_EXTERN struct list_head cifs_tcp_ses_list; -/* protects cifs_tcp_ses_list and srv_count for each tcp session */ +/* + * This lock protects the cifs_tcp_ses_list, the list of smb sessions per + * tcp session, and the list of tcon's per smb session. It also protects + * the reference counters for the server, smb session, and tcon. Finally, + * changes to the tcon->tidStatus should be done while holding this lock. + */ GLOBAL_EXTERN rwlock_t cifs_tcp_ses_lock; -GLOBAL_EXTERN struct list_head GlobalTreeConnectionList; /* BB to be removed */ GLOBAL_EXTERN rwlock_t GlobalSMBSeslock; /* protects list inserts on 3 above */ GLOBAL_EXTERN struct list_head GlobalOplock_Q; diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 9c95617baa4..e6bb2d9d5b0 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -742,50 +742,31 @@ CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon) int rc = 0; cFYI(1, ("In tree disconnect")); - /* - * If last user of the connection and - * connection alive - disconnect it - * If this is the last connection on the server session disconnect it - * (and inside session disconnect we should check if tcp socket needs - * to be freed and kernel thread woken up). - */ - if (tcon) - down(&tcon->tconSem); - else - return -EIO; - atomic_dec(&tcon->useCount); - if (atomic_read(&tcon->useCount) > 0) { - up(&tcon->tconSem); - return -EBUSY; - } + /* BB: do we need to check this? These should never be NULL. */ + if ((tcon->ses == NULL) || (tcon->ses->server == NULL)) + return -EIO; - /* No need to return error on this operation if tid invalidated and - closed on server already e.g. due to tcp session crashing */ - if (tcon->need_reconnect) { - up(&tcon->tconSem); + /* + * No need to return error on this operation if tid invalidated and + * closed on server already e.g. due to tcp session crashing. Also, + * the tcon is no longer on the list, so no need to take lock before + * checking this. + */ + if (tcon->need_reconnect) return 0; - } - if ((tcon->ses == NULL) || (tcon->ses->server == NULL)) { - up(&tcon->tconSem); - return -EIO; - } rc = small_smb_init(SMB_COM_TREE_DISCONNECT, 0, tcon, (void **)&smb_buffer); - if (rc) { - up(&tcon->tconSem); + if (rc) return rc; - } rc = SendReceiveNoRsp(xid, tcon->ses, smb_buffer, 0); if (rc) cFYI(1, ("Tree disconnect failed %d", rc)); - up(&tcon->tconSem); - /* No need to return error on this operation if tid invalidated and - closed on server already e.g. due to tcp session crashing */ + closed on server already e.g. due to tcp session crashing */ if (rc == -EAGAIN) rc = 0; diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index a3dc0d7cafc..2f2be8faabb 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -124,7 +124,7 @@ static int cifs_reconnect(struct TCP_Server_Info *server) { int rc = 0; - struct list_head *tmp; + struct list_head *tmp, *tmp2; struct cifsSesInfo *ses; struct cifsTconInfo *tcon; struct mid_q_entry *mid_entry; @@ -149,13 +149,12 @@ cifs_reconnect(struct TCP_Server_Info *server) ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); ses->need_reconnect = true; ses->ipc_tid = 0; - } - read_unlock(&cifs_tcp_ses_lock); - list_for_each(tmp, &GlobalTreeConnectionList) { - tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); - if ((tcon->ses) && (tcon->ses->server == server)) + list_for_each(tmp2, &ses->tcon_list) { + tcon = list_entry(tmp2, struct cifsTconInfo, tcon_list); tcon->need_reconnect = true; + } } + read_unlock(&cifs_tcp_ses_lock); /* do not want to be sending data on a socket we are freeing */ down(&server->tcpSem); if (server->ssocket) { @@ -1462,6 +1461,52 @@ cifs_put_smb_ses(struct cifsSesInfo *ses) cifs_put_tcp_session(server); } +static struct cifsTconInfo * +cifs_find_tcon(struct cifsSesInfo *ses, const char *unc) +{ + struct list_head *tmp; + struct cifsTconInfo *tcon; + + write_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &ses->tcon_list) { + tcon = list_entry(tmp, struct cifsTconInfo, tcon_list); + if (tcon->tidStatus == CifsExiting) + continue; + if (strncmp(tcon->treeName, unc, MAX_TREE_SIZE)) + continue; + + ++tcon->tc_count; + write_unlock(&cifs_tcp_ses_lock); + return tcon; + } + write_unlock(&cifs_tcp_ses_lock); + return NULL; +} + +static void +cifs_put_tcon(struct cifsTconInfo *tcon) +{ + int xid; + struct cifsSesInfo *ses = tcon->ses; + + write_lock(&cifs_tcp_ses_lock); + if (--tcon->tc_count > 0) { + write_unlock(&cifs_tcp_ses_lock); + return; + } + + list_del_init(&tcon->tcon_list); + write_unlock(&cifs_tcp_ses_lock); + + xid = GetXid(); + CIFSSMBTDis(xid, tcon); + _FreeXid(xid); + + DeleteTconOplockQEntries(tcon); + tconInfoFree(tcon); + cifs_put_smb_ses(ses); +} + int get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, const char *old_path, const struct nls_table *nls_codepage, unsigned int *pnum_referrals, @@ -2220,11 +2265,11 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (!rc) { setup_cifs_sb(&volume_info, cifs_sb); + tcon = cifs_find_tcon(pSesInfo, volume_info.UNC); if (tcon) { cFYI(1, ("Found match on UNC path")); - if (tcon->seal != volume_info.seal) - cERROR(1, ("transport encryption setting " - "conflicts with existing tid")); + /* existing tcon already has a reference */ + cifs_put_smb_ses(pSesInfo); } else { tcon = tconInfoAlloc(); if (tcon == NULL) { @@ -2257,6 +2302,10 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (rc) goto mount_fail_check; tcon->seal = volume_info.seal; + tcon->ses = pSesInfo; + write_lock(&cifs_tcp_ses_lock); + list_add(&tcon->tcon_list, &pSesInfo->tcon_list); + write_unlock(&cifs_tcp_ses_lock); } /* we can have only one retry value for a connection @@ -2283,18 +2332,14 @@ mount_fail_check: /* If find_unc succeeded then rc == 0 so we can not end */ /* up accidently freeing someone elses tcon struct */ if (tcon) - tconInfoFree(tcon); - - /* should also end up putting our tcp session ref if needed */ - if (pSesInfo) + cifs_put_tcon(tcon); + else if (pSesInfo) cifs_put_smb_ses(pSesInfo); else cifs_put_tcp_session(srvTcp); goto out; } - atomic_inc(&tcon->useCount); cifs_sb->tcon = tcon; - tcon->ses = pSesInfo; /* do not care if following two calls succeed - informational */ if (!tcon->ipc) { @@ -3565,23 +3610,10 @@ int cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) { int rc = 0; - int xid; - struct cifsSesInfo *ses = NULL; char *tmp; - xid = GetXid(); - - if (cifs_sb->tcon) { - ses = cifs_sb->tcon->ses; /* save ptr to ses before delete tcon!*/ - rc = CIFSSMBTDis(xid, cifs_sb->tcon); - if (rc == -EBUSY) { - FreeXid(xid); - return 0; - } - DeleteTconOplockQEntries(cifs_sb->tcon); - tconInfoFree(cifs_sb->tcon); - cifs_put_smb_ses(ses); - } + if (cifs_sb->tcon) + cifs_put_tcon(cifs_sb->tcon); cifs_sb->tcon = NULL; tmp = cifs_sb->prepath; @@ -3589,7 +3621,6 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) cifs_sb->prepath = NULL; kfree(tmp); - FreeXid(xid); return rc; } diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 46c8c7baccb..addd1dcc2d7 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -79,6 +79,7 @@ sesInfoAlloc(void) ret_buf->status = CifsNew; ++ret_buf->ses_count; INIT_LIST_HEAD(&ret_buf->smb_ses_list); + INIT_LIST_HEAD(&ret_buf->tcon_list); init_MUTEX(&ret_buf->sesSem); } return ret_buf; @@ -107,17 +108,14 @@ tconInfoAlloc(void) struct cifsTconInfo *ret_buf; ret_buf = kzalloc(sizeof(struct cifsTconInfo), GFP_KERNEL); if (ret_buf) { - write_lock(&GlobalSMBSeslock); atomic_inc(&tconInfoAllocCount); - list_add(&ret_buf->cifsConnectionList, - &GlobalTreeConnectionList); ret_buf->tidStatus = CifsNew; + ++ret_buf->tc_count; INIT_LIST_HEAD(&ret_buf->openFileList); - init_MUTEX(&ret_buf->tconSem); + INIT_LIST_HEAD(&ret_buf->tcon_list); #ifdef CONFIG_CIFS_STATS spin_lock_init(&ret_buf->stat_lock); #endif - write_unlock(&GlobalSMBSeslock); } return ret_buf; } @@ -129,10 +127,7 @@ tconInfoFree(struct cifsTconInfo *buf_to_free) cFYI(1, ("Null buffer passed to tconInfoFree")); return; } - write_lock(&GlobalSMBSeslock); atomic_dec(&tconInfoAllocCount); - list_del(&buf_to_free->cifsConnectionList); - write_unlock(&GlobalSMBSeslock); kfree(buf_to_free->nativeFileSystem); kfree(buf_to_free); } @@ -493,9 +488,10 @@ bool is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv) { struct smb_com_lock_req *pSMB = (struct smb_com_lock_req *)buf; - struct list_head *tmp; - struct list_head *tmp1; + struct list_head *tmp, *tmp1, *tmp2; + struct cifsSesInfo *ses; struct cifsTconInfo *tcon; + struct cifsInodeInfo *pCifsInode; struct cifsFileInfo *netfile; cFYI(1, ("Checking for oplock break or dnotify response")); @@ -550,42 +546,42 @@ is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv) return false; /* look up tcon based on tid & uid */ - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &GlobalTreeConnectionList) { - tcon = list_entry(tmp, struct cifsTconInfo, cifsConnectionList); - if ((tcon->tid == buf->Tid) && (srv == tcon->ses->server)) { + read_lock(&cifs_tcp_ses_lock); + list_for_each(tmp, &srv->smb_ses_list) { + ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); + list_for_each(tmp1, &ses->tcon_list) { + tcon = list_entry(tmp1, struct cifsTconInfo, tcon_list); + if (tcon->tid != buf->Tid) + continue; + cifs_stats_inc(&tcon->num_oplock_brks); - list_for_each(tmp1, &tcon->openFileList) { - netfile = list_entry(tmp1, struct cifsFileInfo, + list_for_each(tmp2, &tcon->openFileList) { + netfile = list_entry(tmp2, struct cifsFileInfo, tlist); - if (pSMB->Fid == netfile->netfid) { - struct cifsInodeInfo *pCifsInode; - read_unlock(&GlobalSMBSeslock); - cFYI(1, - ("file id match, oplock break")); - pCifsInode = - CIFS_I(netfile->pInode); - pCifsInode->clientCanCacheAll = false; - if (pSMB->OplockLevel == 0) - pCifsInode->clientCanCacheRead - = false; - pCifsInode->oplockPending = true; - AllocOplockQEntry(netfile->pInode, - netfile->netfid, - tcon); - cFYI(1, - ("about to wake up oplock thread")); - if (oplockThread) - wake_up_process(oplockThread); - return true; - } + if (pSMB->Fid != netfile->netfid) + continue; + + read_unlock(&cifs_tcp_ses_lock); + cFYI(1, ("file id match, oplock break")); + pCifsInode = CIFS_I(netfile->pInode); + pCifsInode->clientCanCacheAll = false; + if (pSMB->OplockLevel == 0) + pCifsInode->clientCanCacheRead = false; + pCifsInode->oplockPending = true; + AllocOplockQEntry(netfile->pInode, + netfile->netfid, tcon); + cFYI(1, ("about to wake up oplock thread")); + if (oplockThread) + wake_up_process(oplockThread); + + return true; } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); cFYI(1, ("No matching file for oplock break")); return true; } } - read_unlock(&GlobalSMBSeslock); + read_unlock(&cifs_tcp_ses_lock); cFYI(1, ("Can not process oplock break for non-existent connection")); return true; } -- cgit v1.2.3-70-g09d2 From ebfe92ca65c780334bdf847ddc4eca15835bd9c0 Mon Sep 17 00:00:00 2001 From: Rémi Denis-Courmont Date: Sun, 16 Nov 2008 19:48:49 -0800 Subject: Phonet: refuse to send bigger than MTU packets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- net/phonet/af_phonet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/phonet/af_phonet.c b/net/phonet/af_phonet.c index defeb7a0d50..7ab30f668b5 100644 --- a/net/phonet/af_phonet.c +++ b/net/phonet/af_phonet.c @@ -144,8 +144,8 @@ static int pn_send(struct sk_buff *skb, struct net_device *dev, struct phonethdr *ph; int err; - if (skb->len + 2 > 0xffff) { - /* Phonet length field would overflow */ + if (skb->len + 2 > 0xffff /* Phonet length field limit */ || + skb->len + sizeof(struct phonethdr) > dev->mtu) { err = -EMSGSIZE; goto drop; } -- cgit v1.2.3-70-g09d2 From c2b3382cd4d6c6adef1347e81f20e16c93a39feb Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 17 Nov 2008 03:57:13 +0000 Subject: [CIFS] Fix build break Signed-off-by: Steve French --- fs/cifs/cifs_debug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 1d6dfa8923c..490e34bbf27 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -249,9 +249,9 @@ static ssize_t cifs_stats_proc_write(struct file *file, list_for_each(tmp1, &cifs_tcp_ses_list) { server = list_entry(tmp1, struct TCP_Server_Info, tcp_ses_list); - list_for_each(tmp2, &server->smb_session_list) { + list_for_each(tmp2, &server->smb_ses_list) { ses = list_entry(tmp2, struct cifsSesInfo, - smb_session_list); + smb_ses_list); list_for_each(tmp3, &ses->tcon_list) { tcon = list_entry(tmp3, struct cifsTconInfo, -- cgit v1.2.3-70-g09d2 From 584c650b4e6fa16f9ab45d382f86ad6d9c625227 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sun, 16 Nov 2008 23:03:45 -0800 Subject: isdn: remove extra byteswap in isdn_net_ciscohdlck_slarp_send_reply commit a144ea4b7a13087081ab5402fa9ad0bcfd249e67 [IPV4]: annotate struct in_ifaddr Missed this extra byteswap as the isdn inlines hide the htonl inside put_u32 which causes an extra byteswap on little-endian arches. Signed-off-by: Harvey Harrison Signed-off-by: David S. Miller --- drivers/isdn/i4l/isdn_net.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c index bb904a0a98b..1bfc55d7a26 100644 --- a/drivers/isdn/i4l/isdn_net.c +++ b/drivers/isdn/i4l/isdn_net.c @@ -1641,8 +1641,10 @@ isdn_net_ciscohdlck_slarp_send_reply(isdn_net_local *lp) /* slarp reply, send own ip/netmask; if values are nonsense remote * should think we are unable to provide it with an address via SLARP */ p += put_u32(p, CISCO_SLARP_REPLY); - p += put_u32(p, addr); // address - p += put_u32(p, mask); // netmask + *(__be32 *)p = addr; // address + p += 4; + *(__be32 *)p = mask; // netmask + p += 4; p += put_u16(p, 0); // unused isdn_net_write_super(lp, skb); -- cgit v1.2.3-70-g09d2 From 5f9021cfdc3524a4c5e3d7ae2d049eb7adcd6776 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 16 Nov 2008 23:20:31 -0800 Subject: rtnetlink: propagate error from dev_change_flags in do_setlink() Unlike ifconfig, iproute doesn't report an error when setting an interface up fails: (example: put wireless network mac80211 interface into repeater mode with iwconfig but do not set a peer MAC address, it should fail with -ENOLINK) without patch: # ip link set wlan0 up ; echo $? 0 # with patch: # ip link set wlan0 up ; echo $? RTNETLINK answers: Link has been severed 2 # Propagate the return value from dev_change_flags() to fix this. Signed-off-by: Patrick McHardy Tested-by: Johannes Berg Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 31f29d2989f..4dfb6b4d455 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -878,7 +878,9 @@ static int do_setlink(struct net_device *dev, struct ifinfomsg *ifm, if (ifm->ifi_change) flags = (flags & ifm->ifi_change) | (dev->flags & ~ifm->ifi_change); - dev_change_flags(dev, flags); + err = dev_change_flags(dev, flags); + if (err < 0) + goto errout; } if (tb[IFLA_TXQLEN]) -- cgit v1.2.3-70-g09d2 From 1e74f3000b86969de421ca0da08f42e7d21cbd99 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 17 Nov 2008 16:24:34 +0900 Subject: swiotlb: use coherent_dma_mask in alloc_coherent Impact: fix DMA buffer allocation coherency bug in certain configs This patch fixes swiotlb to use dev->coherent_dma_mask in swiotlb_alloc_coherent(). coherent_dma_mask is a subset of dma_mask (equal to it most of the time), enumerating the address range that a given device is able to DMA to/from in a cache-coherent way. But currently, swiotlb uses dev->dma_mask in alloc_coherent() implicitly via address_needs_mapping(), but alloc_coherent is really supposed to use coherent_dma_mask. This bug could break drivers that uses smaller coherent_dma_mask than dma_mask (though the current code works for the majority that use the same mask for coherent_dma_mask and dma_mask). Signed-off-by: FUJITA Tomonori Cc: tony.luck@intel.com Signed-off-by: Ingo Molnar --- lib/swiotlb.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/lib/swiotlb.c b/lib/swiotlb.c index 78330c37a61..5f6c629a924 100644 --- a/lib/swiotlb.c +++ b/lib/swiotlb.c @@ -467,9 +467,13 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t dev_addr; void *ret; int order = get_order(size); + u64 dma_mask = DMA_32BIT_MASK; + + if (hwdev && hwdev->coherent_dma_mask) + dma_mask = hwdev->coherent_dma_mask; ret = (void *)__get_free_pages(flags, order); - if (ret && address_needs_mapping(hwdev, virt_to_bus(ret), size)) { + if (ret && !is_buffer_dma_capable(dma_mask, virt_to_bus(ret), size)) { /* * The allocated memory isn't reachable by the device. * Fall back on swiotlb_map_single(). @@ -493,9 +497,9 @@ swiotlb_alloc_coherent(struct device *hwdev, size_t size, dev_addr = virt_to_bus(ret); /* Confirm address can be DMA'd by device */ - if (address_needs_mapping(hwdev, dev_addr, size)) { + if (!is_buffer_dma_capable(dma_mask, dev_addr, size)) { printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016Lx\n", - (unsigned long long)*hwdev->dma_mask, + (unsigned long long)dma_mask, (unsigned long long)dev_addr); /* DMA_TO_DEVICE to avoid memcpy in unmap_single */ -- cgit v1.2.3-70-g09d2 From ad133ba3dc283300e5b62b5b7211d2f39fbf6ee7 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 17 Nov 2008 15:39:47 +0100 Subject: sched, signals: fix the racy usage of ->signal in account_group_xxx/run_posix_cpu_timers Impact: fix potential NULL dereference Contrary to ad474caca3e2a0550b7ce0706527ad5ab389a4d4 changelog, other acct_group_xxx() helpers can be called after exit_notify() by timer tick. Thanks to Roland for pointing out this. Somehow I missed this simple fact when I read the original patch, and I am afraid I confused Frank during the discussion. Sorry. Fortunately, these helpers work with current, we can check ->exit_state to ensure that ->signal can't go away under us. Also, add the comment and compiler barrier to account_group_exec_runtime(), to make sure we load ->signal only once. Signed-off-by: Oleg Nesterov Signed-off-by: Ingo Molnar --- kernel/posix-cpu-timers.c | 7 +++++-- kernel/sched_stats.h | 15 +++++++++++---- 2 files changed, 16 insertions(+), 6 deletions(-) diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index 153dcb2639c..895337b16a2 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -1308,9 +1308,10 @@ static inline int task_cputime_expired(const struct task_cputime *sample, */ static inline int fastpath_timer_check(struct task_struct *tsk) { - struct signal_struct *sig = tsk->signal; + struct signal_struct *sig; - if (unlikely(!sig)) + /* tsk == current, ensure it is safe to use ->signal/sighand */ + if (unlikely(tsk->exit_state)) return 0; if (!task_cputime_zero(&tsk->cputime_expires)) { @@ -1323,6 +1324,8 @@ static inline int fastpath_timer_check(struct task_struct *tsk) if (task_cputime_expired(&task_sample, &tsk->cputime_expires)) return 1; } + + sig = tsk->signal; if (!task_cputime_zero(&sig->cputime_expires)) { struct task_cputime group_sample; diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h index ee71bec1da6..7dbf72a2b02 100644 --- a/kernel/sched_stats.h +++ b/kernel/sched_stats.h @@ -298,9 +298,11 @@ static inline void account_group_user_time(struct task_struct *tsk, { struct signal_struct *sig; - sig = tsk->signal; - if (unlikely(!sig)) + /* tsk == current, ensure it is safe to use ->signal */ + if (unlikely(tsk->exit_state)) return; + + sig = tsk->signal; if (sig->cputime.totals) { struct task_cputime *times; @@ -325,9 +327,11 @@ static inline void account_group_system_time(struct task_struct *tsk, { struct signal_struct *sig; - sig = tsk->signal; - if (unlikely(!sig)) + /* tsk == current, ensure it is safe to use ->signal */ + if (unlikely(tsk->exit_state)) return; + + sig = tsk->signal; if (sig->cputime.totals) { struct task_cputime *times; @@ -353,8 +357,11 @@ static inline void account_group_exec_runtime(struct task_struct *tsk, struct signal_struct *sig; sig = tsk->signal; + /* see __exit_signal()->task_rq_unlock_wait() */ + barrier(); if (unlikely(!sig)) return; + if (sig->cputime.totals) { struct task_cputime *times; -- cgit v1.2.3-70-g09d2 From ab3f992983062440b4f37c666dac66d987902d91 Mon Sep 17 00:00:00 2001 From: Steve French Date: Mon, 17 Nov 2008 16:03:00 +0000 Subject: [CIFS] Fix check for tcon seal setting and fix oops on failed mount from earlier patch set tcon->ses earlier If the inital tree connect fails, we'll end up calling cifs_put_smb_ses with a NULL pointer. Fix it by setting the tcon->ses earlier. Acked-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 2f2be8faabb..c7d34171458 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2270,16 +2270,18 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, cFYI(1, ("Found match on UNC path")); /* existing tcon already has a reference */ cifs_put_smb_ses(pSesInfo); + if (tcon->seal != volume_info.seal) + cERROR(1, ("transport encryption setting " + "conflicts with existing tid")); } else { tcon = tconInfoAlloc(); if (tcon == NULL) { rc = -ENOMEM; goto mount_fail_check; } + tcon->ses = pSesInfo; /* check for null share name ie connect to dfs root */ - - /* BB check if works for exactly length 3 strings */ if ((strchr(volume_info.UNC + 3, '\\') == NULL) && (strchr(volume_info.UNC + 3, '/') == NULL)) { /* rc = connect_to_dfs_path(...) */ @@ -2302,7 +2304,6 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, if (rc) goto mount_fail_check; tcon->seal = volume_info.seal; - tcon->ses = pSesInfo; write_lock(&cifs_tcp_ses_lock); list_add(&tcon->tcon_list, &pSesInfo->tcon_list); write_unlock(&cifs_tcp_ses_lock); -- cgit v1.2.3-70-g09d2 From 65ecc14a30ad21bed9aabdfd6a2ae1a1aaaa6a00 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 15 Nov 2008 12:02:34 -0600 Subject: Remove -mno-spe flags as they dont belong For some unknown reason at Steven Rostedt added in disabling of the SPE instruction generation for e500 based PPC cores in commit 6ec562328fda585be2d7f472cfac99d3b44d362a. We are removing it because: 1. It generates e500 kernels that don't work 2. its not the correct set of flags to do this 3. we handle this in the arch/powerpc/Makefile already 4. its unknown in talking to Steven why he did this Signed-off-by: Kumar Gala Tested-and-Acked-by: Steven Rostedt Signed-off-by: Linus Torvalds --- kernel/Makefile | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/kernel/Makefile b/kernel/Makefile index 9a3ec66a9d8..19fad003b19 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -11,8 +11,6 @@ obj-y = sched.o fork.o exec_domain.o panic.o printk.o \ hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \ notifier.o ksysfs.o pm_qos_params.o sched_clock.o -CFLAGS_REMOVE_sched.o = -mno-spe - ifdef CONFIG_FUNCTION_TRACER # Do not trace debug files and internal ftrace files CFLAGS_REMOVE_lockdep.o = -pg @@ -21,7 +19,7 @@ CFLAGS_REMOVE_mutex-debug.o = -pg CFLAGS_REMOVE_rtmutex-debug.o = -pg CFLAGS_REMOVE_cgroup-debug.o = -pg CFLAGS_REMOVE_sched_clock.o = -pg -CFLAGS_REMOVE_sched.o = -mno-spe -pg +CFLAGS_REMOVE_sched.o = -pg endif obj-$(CONFIG_FREEZER) += freezer.o -- cgit v1.2.3-70-g09d2 From 2c55608f28444c3f33b10312881384c470ceed56 Mon Sep 17 00:00:00 2001 From: Igor Mammedov Date: Thu, 23 Oct 2008 13:58:42 +0400 Subject: Fixed parsing of mount options when doing DFS submount Since these hit the same routines, and are relatively small, it is easier to review them as one patch. Fixed incorrect handling of the last option in some cases Fixed prefixpath handling convert path_consumed into host depended string length (in bytes) Use non default separator if it is provided in the original mount options Acked-by: Jeff Layton Signed-off-by: Igor Mammedov Signed-off-by: Steve French --- fs/cifs/cifs_dfs_ref.c | 71 +++++++++++++++++++++++++++++++++----------------- fs/cifs/cifssmb.c | 39 ++++++++++++++++++++++++--- 2 files changed, 83 insertions(+), 27 deletions(-) diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index d2c8eef84f3..e1c18362ba4 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -106,7 +106,8 @@ static char *cifs_get_share_name(const char *node_name) /** * compose_mount_options - creates mount options for refferral * @sb_mountdata: parent/root DFS mount options (template) - * @ref_unc: refferral server UNC + * @dentry: point where we are going to mount + * @ref: server's referral * @devname: pointer for saving device name * * creates mount options for submount based on template options sb_mountdata @@ -116,7 +117,8 @@ static char *cifs_get_share_name(const char *node_name) * Caller is responcible for freeing retunrned value if it is not error. */ static char *compose_mount_options(const char *sb_mountdata, - const char *ref_unc, + struct dentry *dentry, + const struct dfs_info3_param *ref, char **devname) { int rc; @@ -126,11 +128,12 @@ static char *compose_mount_options(const char *sb_mountdata, char *srvIP = NULL; char sep = ','; int off, noff; + char *fullpath; if (sb_mountdata == NULL) return ERR_PTR(-EINVAL); - *devname = cifs_get_share_name(ref_unc); + *devname = cifs_get_share_name(ref->node_name); rc = dns_resolve_server_name_to_ip(*devname, &srvIP); if (rc != 0) { cERROR(1, ("%s: Failed to resolve server part of %s to IP", @@ -138,7 +141,12 @@ static char *compose_mount_options(const char *sb_mountdata, mountdata = ERR_PTR(rc); goto compose_mount_options_out; } - md_len = strlen(sb_mountdata) + strlen(srvIP) + strlen(ref_unc) + 3; + /* md_len = strlen(...) + 12 for 'sep+prefixpath=' + * assuming that we have 'unc=' and 'ip=' in + * the original sb_mountdata + */ + md_len = strlen(sb_mountdata) + strlen(srvIP) + + strlen(ref->node_name) + 12; mountdata = kzalloc(md_len+1, GFP_KERNEL); if (mountdata == NULL) { mountdata = ERR_PTR(-ENOMEM); @@ -152,41 +160,56 @@ static char *compose_mount_options(const char *sb_mountdata, strncpy(mountdata, sb_mountdata, 5); off += 5; } - while ((tkn_e = strchr(sb_mountdata+off, sep))) { - noff = (tkn_e - (sb_mountdata+off)) + 1; - if (strnicmp(sb_mountdata+off, "unc=", 4) == 0) { + + do { + tkn_e = strchr(sb_mountdata + off, sep); + if (tkn_e == NULL) + noff = strlen(sb_mountdata + off); + else + noff = tkn_e - (sb_mountdata + off) + 1; + + if (strnicmp(sb_mountdata + off, "unc=", 4) == 0) { off += noff; continue; } - if (strnicmp(sb_mountdata+off, "ip=", 3) == 0) { + if (strnicmp(sb_mountdata + off, "ip=", 3) == 0) { off += noff; continue; } - if (strnicmp(sb_mountdata+off, "prefixpath=", 3) == 0) { + if (strnicmp(sb_mountdata + off, "prefixpath=", 11) == 0) { off += noff; continue; } - strncat(mountdata, sb_mountdata+off, noff); + strncat(mountdata, sb_mountdata + off, noff); off += noff; - } - strcat(mountdata, sb_mountdata+off); + } while (tkn_e); + strcat(mountdata, sb_mountdata + off); mountdata[md_len] = '\0'; /* copy new IP and ref share name */ - strcat(mountdata, ",ip="); + if (mountdata[strlen(mountdata) - 1] != sep) + strncat(mountdata, &sep, 1); + strcat(mountdata, "ip="); strcat(mountdata, srvIP); - strcat(mountdata, ",unc="); + strncat(mountdata, &sep, 1); + strcat(mountdata, "unc="); strcat(mountdata, *devname); /* find & copy prefixpath */ - tkn_e = strchr(ref_unc+2, '\\'); - if (tkn_e) { - tkn_e = strchr(tkn_e+1, '\\'); - if (tkn_e) { - strcat(mountdata, ",prefixpath="); - strcat(mountdata, tkn_e+1); - } + tkn_e = strchr(ref->node_name + 2, '\\'); + if (tkn_e == NULL) /* invalid unc, missing share name*/ + goto compose_mount_options_out; + + fullpath = build_path_from_dentry(dentry); + tkn_e = strchr(tkn_e + 1, '\\'); + if (tkn_e || strlen(fullpath) - (ref->path_consumed)) { + strncat(mountdata, &sep, 1); + strcat(mountdata, "prefixpath="); + if (tkn_e) + strcat(mountdata, tkn_e + 1); + strcat(mountdata, fullpath + (ref->path_consumed)); } + kfree(fullpath); /*cFYI(1,("%s: parent mountdata: %s", __func__,sb_mountdata));*/ /*cFYI(1, ("%s: submount mountdata: %s", __func__, mountdata ));*/ @@ -198,7 +221,7 @@ compose_mount_options_out: static struct vfsmount *cifs_dfs_do_refmount(const struct vfsmount *mnt_parent, - struct dentry *dentry, char *ref_unc) + struct dentry *dentry, const struct dfs_info3_param *ref) { struct cifs_sb_info *cifs_sb; struct vfsmount *mnt; @@ -207,7 +230,7 @@ static struct vfsmount *cifs_dfs_do_refmount(const struct vfsmount *mnt_parent, cifs_sb = CIFS_SB(dentry->d_inode->i_sb); mountdata = compose_mount_options(cifs_sb->mountdata, - ref_unc, &devname); + dentry, ref, &devname); if (IS_ERR(mountdata)) return (struct vfsmount *)mountdata; @@ -310,7 +333,7 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd) } mnt = cifs_dfs_do_refmount(nd->path.mnt, nd->path.dentry, - referrals[i].node_name); + referrals + i); cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p", __func__, referrals[i].node_name, mnt)); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index e6bb2d9d5b0..bdda46dd435 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -3899,6 +3899,27 @@ GetInodeNumOut: return rc; } +/* computes length of UCS string converted to host codepage + * @src: UCS string + * @maxlen: length of the input string in UCS characters + * (not in bytes) + * + * return: size of input string in host codepage + */ +static int hostlen_fromUCS(const __le16 *src, const int maxlen, + const struct nls_table *nls_codepage) { + int i; + int hostlen = 0; + char to[4]; + int charlen; + for (i = 0; (i < maxlen) && src[i]; ++i) { + charlen = nls_codepage->uni2char(le16_to_cpu(src[i]), + to, NLS_MAX_CHARSET_SIZE); + hostlen += charlen > 0 ? charlen : 1; + } + return hostlen; +} + /* parses DFS refferal V3 structure * caller is responsible for freeing target_nodes * returns: @@ -3909,7 +3930,8 @@ static int parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, unsigned int *num_of_nodes, struct dfs_info3_param **target_nodes, - const struct nls_table *nls_codepage) + const struct nls_table *nls_codepage, int remap, + const char *searchName) { int i, rc = 0; char *data_end; @@ -3960,7 +3982,17 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, struct dfs_info3_param *node = (*target_nodes)+i; node->flags = le16_to_cpu(pSMBr->DFSFlags); - node->path_consumed = le16_to_cpu(pSMBr->PathConsumed); + if (is_unicode) { + __le16 *tmp = kmalloc(strlen(searchName)*2, GFP_KERNEL); + cifsConvertToUCS((__le16 *) tmp, searchName, + PATH_MAX, nls_codepage, remap); + node->path_consumed = hostlen_fromUCS(tmp, + le16_to_cpu(pSMBr->PathConsumed)/2, + nls_codepage); + kfree(tmp); + } else + node->path_consumed = le16_to_cpu(pSMBr->PathConsumed); + node->server_type = le16_to_cpu(ref->ServerType); node->ref_flag = le16_to_cpu(ref->ReferralEntryFlags); @@ -4093,7 +4125,8 @@ getDFSRetry: /* parse returned result into more usable form */ rc = parse_DFS_referrals(pSMBr, num_of_nodes, - target_nodes, nls_codepage); + target_nodes, nls_codepage, remap, + searchName); GetDFSRefExit: cifs_buf_release(pSMB); -- cgit v1.2.3-70-g09d2 From b066a48c9532243894f93a06ca5a0ee2cc21a8dc Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Tue, 18 Nov 2008 03:49:05 +0000 Subject: prevent cifs_writepages() from skipping unwritten pages Fixes a data corruption under heavy stress in which pages could be left dirty after all open instances of a inode have been closed. In order to write contiguous pages whenever possible, cifs_writepages() asks pagevec_lookup_tag() for more pages than it may write at one time. Normally, it then resets index just past the last page written before calling pagevec_lookup_tag() again. If cifs_writepages() can't write the first page returned, it wasn't resetting index, and the next call to pagevec_lookup_tag() resulted in skipping all of the pages it previously returned, even though cifs_writepages() did nothing with them. This can result in data loss when the file descriptor is about to be closed. This patch ensures that index gets set back to the next returned page so that none get skipped. Signed-off-by: Dave Kleikamp Acked-by: Jeff Layton Cc: Shirish S Pargaonkar Signed-off-by: Steve French --- fs/cifs/file.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 1540adaa593..6449e1aae62 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1404,7 +1404,10 @@ retry: if ((wbc->nr_to_write -= n_iov) <= 0) done = 1; index = next; - } + } else + /* Need to re-find the pages we skipped */ + index = pvec.pages[0]->index + 1; + pagevec_release(&pvec); } if (!scanned && !done) { -- cgit v1.2.3-70-g09d2 From 700018e0a77b4113172257fcdaa1c58e27a5074f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 18 Nov 2008 14:02:03 +0800 Subject: cpuset: fix regression when failed to generate sched domains Impact: properly rebuild sched-domains on kmalloc() failure When cpuset failed to generate sched domains due to kmalloc() failure, the scheduler should fallback to the single partition 'fallback_doms' and rebuild sched domains, but now it only destroys but not rebuilds sched domains. The regression was introduced by: | commit dfb512ec4834116124da61d6c1ee10fd0aa32bd6 | Author: Max Krasnyansky | Date: Fri Aug 29 13:11:41 2008 -0700 | | sched: arch_reinit_sched_domains() must destroy domains to force rebuild After the above commit, partition_sched_domains(0, NULL, NULL) will only destroy sched domains and partition_sched_domains(1, NULL, NULL) will create the default sched domain. Signed-off-by: Li Zefan Cc: Max Krasnyansky Cc: Signed-off-by: Ingo Molnar --- kernel/cpuset.c | 12 ++++++++---- kernel/sched.c | 13 +++++++------ 2 files changed, 15 insertions(+), 10 deletions(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 3e00526f52e..81fc6791a29 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -587,7 +587,6 @@ static int generate_sched_domains(cpumask_t **domains, int ndoms; /* number of sched domains in result */ int nslot; /* next empty doms[] cpumask_t slot */ - ndoms = 0; doms = NULL; dattr = NULL; csa = NULL; @@ -674,10 +673,8 @@ restart: * Convert to and populate cpu masks. */ doms = kmalloc(ndoms * sizeof(cpumask_t), GFP_KERNEL); - if (!doms) { - ndoms = 0; + if (!doms) goto done; - } /* * The rest of the code, including the scheduler, can deal with @@ -732,6 +729,13 @@ restart: done: kfree(csa); + /* + * Fallback to the default domain if kmalloc() failed. + * See comments in partition_sched_domains(). + */ + if (doms == NULL) + ndoms = 1; + *domains = doms; *attributes = dattr; return ndoms; diff --git a/kernel/sched.c b/kernel/sched.c index c94baf2969e..9b1e79371c2 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7789,13 +7789,14 @@ static int dattrs_equal(struct sched_domain_attr *cur, int idx_cur, * * The passed in 'doms_new' should be kmalloc'd. This routine takes * ownership of it and will kfree it when done with it. If the caller - * failed the kmalloc call, then it can pass in doms_new == NULL, - * and partition_sched_domains() will fallback to the single partition - * 'fallback_doms', it also forces the domains to be rebuilt. + * failed the kmalloc call, then it can pass in doms_new == NULL && + * ndoms_new == 1, and partition_sched_domains() will fallback to + * the single partition 'fallback_doms', it also forces the domains + * to be rebuilt. * - * If doms_new==NULL it will be replaced with cpu_online_map. - * ndoms_new==0 is a special case for destroying existing domains. - * It will not create the default domain. + * If doms_new == NULL it will be replaced with cpu_online_map. + * ndoms_new == 0 is a special case for destroying existing domains, + * and it will not create the default domain. * * Call with hotplug lock held */ -- cgit v1.2.3-70-g09d2 From e270219f4372b58bd3eeac12bd9f7edc592b8f6b Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Tue, 18 Nov 2008 10:15:24 +0600 Subject: kernel/profile.c: fix section mismatch warning Impact: fix section mismatch warning in kernel/profile.c Here, profile_nop function has been called from a non-init function create_hash_tables(void). Which generetes a section mismatch warning. Previously, create_hash_tables(void) was a init function. So, removing __init from create_hash_tables(void) requires profile_nop to be non-init. This patch makes profile_nop function inline and fixes the following warning: WARNING: vmlinux.o(.text+0x6ebb6): Section mismatch in reference from the function create_hash_tables() to the function .init.text:profile_nop() The function create_hash_tables() references the function __init profile_nop(). This is often because create_hash_tables lacks a __init annotation or the annotation of profile_nop is wrong. Signed-off-by: Rakib Mullick Signed-off-by: Ingo Molnar --- kernel/profile.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/profile.c b/kernel/profile.c index 9830a037d8d..5b7d1ac7124 100644 --- a/kernel/profile.c +++ b/kernel/profile.c @@ -544,7 +544,7 @@ static const struct file_operations proc_profile_operations = { }; #ifdef CONFIG_SMP -static void __init profile_nop(void *unused) +static inline void profile_nop(void *unused) { } -- cgit v1.2.3-70-g09d2 From 41c3b648bd4cdc34fd1918e288f8afe78903432e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 18 Nov 2008 10:45:15 +0100 Subject: ALSA: hda - Fix GPIO initialization in patch_stac92hd71bxx() Fixed the GPIO mask and co initialization in patch_stac92hd71bxx() so that the gpio_maks for HP_M4 model is set properly. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 0df6f979f2a..b254e90b47c 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4478,6 +4478,13 @@ again: stac92xx_set_config_regs(codec); } + if (spec->board_config > STAC_92HD71BXX_REF) { + /* GPIO0 = EAPD */ + spec->gpio_mask = 0x01; + spec->gpio_dir = 0x01; + spec->gpio_data = 0x01; + } + switch (codec->vendor_id) { case 0x111d76b6: /* 4 Port without Analog Mixer */ case 0x111d76b7: @@ -4537,13 +4544,6 @@ again: spec->aloopback_mask = 0x50; spec->aloopback_shift = 0; - if (spec->board_config > STAC_92HD71BXX_REF) { - /* GPIO0 = EAPD */ - spec->gpio_mask = 0x01; - spec->gpio_dir = 0x01; - spec->gpio_data = 0x01; - } - spec->powerdown_adcs = 1; spec->digbeep_nid = 0x26; spec->mux_nids = stac92hd71bxx_mux_nids; -- cgit v1.2.3-70-g09d2 From 4213cb64004e38b3e78424f30e1e638f8004c7a8 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Tue, 18 Nov 2008 17:48:22 +0800 Subject: Blackfin arch: fix bug - Turn on DEBUG_DOUBLEFAULT, booting SMP kernel crash Signed-off-by: Graf Yang Signed-off-by: Bryan Wu --- arch/blackfin/mach-common/entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index c13fa8da28c..bde6dc4e261 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -277,7 +277,7 @@ ENTRY(_bfin_return_from_exception) p5.h = hi(ILAT); r6 = [p5]; r7 = 0x20; /* Did I just cause anther HW error? */ - r7 = r7 & r1; + r6 = r7 & r6; CC = R7 == R6; if CC JUMP _double_fault; #endif -- cgit v1.2.3-70-g09d2 From 62273eeb6ac516ab0abf49417378726ad8875b03 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 18 Nov 2008 17:48:22 +0800 Subject: Blackfin arch: fix a broken define in dma-mapping dma_mapping_error is an actual function, so fix broken define with a real inline stub Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- arch/blackfin/include/asm/dma-mapping.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h index ede748d67ef..d7d9148e433 100644 --- a/arch/blackfin/include/asm/dma-mapping.h +++ b/arch/blackfin/include/asm/dma-mapping.h @@ -15,7 +15,11 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr, #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) -#define dma_mapping_error +static inline +int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} /* * Map a single buffer of the indicated size for DMA in streaming mode. -- cgit v1.2.3-70-g09d2 From 80bf272468a8b63f5550304363e55c1ba06c13db Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 18 Nov 2008 10:48:41 +0100 Subject: ALSA: hda - Add quirks for HP Pavilion DV models Added the quirk entries for HP Pavilion DV5 and DV7 with model=hp-m4. Reference: Novell bnc#445321, bnc#445161 https://bugzilla.novell.com/show_bug.cgi?id=445321 https://bugzilla.novell.com/show_bug.cgi?id=445161 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index b254e90b47c..25d4bf8e422 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1688,6 +1688,10 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { /* SigmaTel reference board */ SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_92HD71BXX_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f2, + "HP dv5", STAC_HP_M4), + SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f4, + "HP dv7", STAC_HP_M4), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361a, "unknown HP", STAC_HP_M4), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233, -- cgit v1.2.3-70-g09d2 From c5d08bb567874e410210cf7d21a25f28fcceb0a7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 18 Nov 2008 10:55:36 +0100 Subject: ALSA: hda - Fix resume of GPIO unsol event for STAC/IDT Use cached write for setting the GPIO unsolicited event mask to be restored properly at resume. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 25d4bf8e422..9563b5bbb27 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4502,7 +4502,7 @@ again: switch (spec->board_config) { case STAC_HP_M4: /* Enable VREF power saving on GPIO1 detect */ - snd_hda_codec_write(codec, codec->afg, 0, + snd_hda_codec_write_cache(codec, codec->afg, 0, AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK, 0x02); snd_hda_codec_write_cache(codec, codec->afg, 0, AC_VERB_SET_UNSOLICITED_ENABLE, @@ -4895,7 +4895,7 @@ static int patch_stac9205(struct hda_codec *codec) stac92xx_set_config_reg(codec, 0x20, 0x1c410030); /* Enable unsol response for GPIO4/Dock HP connection */ - snd_hda_codec_write(codec, codec->afg, 0, + snd_hda_codec_write_cache(codec, codec->afg, 0, AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK, 0x10); snd_hda_codec_write_cache(codec, codec->afg, 0, AC_VERB_SET_UNSOLICITED_ENABLE, -- cgit v1.2.3-70-g09d2 From eb60fa1066622ddb2278732cf61e0c4544e82c6f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 10 Nov 2008 15:28:59 +0900 Subject: block: fix add_partition() error path Partition stats structure was not freed on devt allocation failure path. Fix it. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/partitions/check.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 633f7a0ebb2..90bcf136a9d 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -395,7 +395,7 @@ int add_partition(struct gendisk *disk, int partno, err = blk_alloc_devt(p, &devt); if (err) - goto out_free; + goto out_free_stats; pdev->devt = devt; /* delay uevent until 'holders' subdir is created */ @@ -426,6 +426,8 @@ int add_partition(struct gendisk *disk, int partno, return 0; +out_free_stats: + free_part_stats(p); out_free: kfree(p); return err; -- cgit v1.2.3-70-g09d2 From ba32929a91fe2c0628f5be62d1597b379c8d3062 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 10 Nov 2008 15:29:58 +0900 Subject: block: make add_partition() return pointer to hd_struct Make add_partition() return pointer to the new hd_struct on success and ERR_PTR() value on failure. This change will be used to fix md autodetection bug. Signed-off-by: Tejun Heo Cc: Neil Brown Signed-off-by: Jens Axboe --- block/ioctl.c | 7 +++---- fs/partitions/check.c | 25 +++++++++++++------------ include/linux/genhd.h | 4 +++- 3 files changed, 19 insertions(+), 17 deletions(-) diff --git a/block/ioctl.c b/block/ioctl.c index c832d639b6e..d03985b04d6 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -18,7 +18,6 @@ static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user struct disk_part_iter piter; long long start, length; int partno; - int err; if (!capable(CAP_SYS_ADMIN)) return -EACCES; @@ -61,10 +60,10 @@ static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user disk_part_iter_exit(&piter); /* all seems OK */ - err = add_partition(disk, partno, start, length, - ADDPART_FLAG_NONE); + part = add_partition(disk, partno, start, length, + ADDPART_FLAG_NONE); mutex_unlock(&bdev->bd_mutex); - return err; + return IS_ERR(part) ? PTR_ERR(part) : 0; case BLKPG_DEL_PARTITION: part = disk_get_part(disk, partno); if (!part) diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 90bcf136a9d..63302534023 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -348,8 +348,8 @@ static ssize_t whole_disk_show(struct device *dev, static DEVICE_ATTR(whole_disk, S_IRUSR | S_IRGRP | S_IROTH, whole_disk_show, NULL); -int add_partition(struct gendisk *disk, int partno, - sector_t start, sector_t len, int flags) +struct hd_struct *add_partition(struct gendisk *disk, int partno, + sector_t start, sector_t len, int flags) { struct hd_struct *p; dev_t devt = MKDEV(0, 0); @@ -361,15 +361,15 @@ int add_partition(struct gendisk *disk, int partno, err = disk_expand_part_tbl(disk, partno); if (err) - return err; + return ERR_PTR(err); ptbl = disk->part_tbl; if (ptbl->part[partno]) - return -EBUSY; + return ERR_PTR(-EBUSY); p = kzalloc(sizeof(*p), GFP_KERNEL); if (!p) - return -ENOMEM; + return ERR_PTR(-EBUSY); if (!init_part_stats(p)) { err = -ENOMEM; @@ -424,20 +424,20 @@ int add_partition(struct gendisk *disk, int partno, if (!ddev->uevent_suppress) kobject_uevent(&pdev->kobj, KOBJ_ADD); - return 0; + return p; out_free_stats: free_part_stats(p); out_free: kfree(p); - return err; + return ERR_PTR(err); out_del: kobject_put(p->holder_dir); device_del(pdev); out_put: put_device(pdev); blk_free_devt(devt); - return err; + return ERR_PTR(err); } /* Not exported, helper to add_disk(). */ @@ -568,10 +568,11 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev) disk->disk_name, p, (unsigned long long) size); size = get_capacity(disk) - from; } - res = add_partition(disk, p, from, size, state->parts[p].flags); - if (res) { - printk(KERN_ERR " %s: p%d could not be added: %d\n", - disk->disk_name, p, -res); + part = add_partition(disk, p, from, size, + state->parts[p].flags); + if (IS_ERR(part)) { + printk(KERN_ERR " %s: p%d could not be added: %ld\n", + disk->disk_name, p, -PTR_ERR(part)); continue; } #ifdef CONFIG_BLK_DEV_MD diff --git a/include/linux/genhd.h b/include/linux/genhd.h index e439e6aed83..3df7742ce24 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -522,7 +522,9 @@ extern char *disk_name (struct gendisk *hd, int partno, char *buf); extern int disk_expand_part_tbl(struct gendisk *disk, int target); extern int rescan_partitions(struct gendisk *disk, struct block_device *bdev); -extern int __must_check add_partition(struct gendisk *, int, sector_t, sector_t, int); +extern struct hd_struct * __must_check add_partition(struct gendisk *disk, + int partno, sector_t start, + sector_t len, int flags); extern void delete_partition(struct gendisk *, int); extern void printk_all_partitions(void); -- cgit v1.2.3-70-g09d2 From 55e8e30c382d25c34f8aafcc78efec948571a941 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 10 Nov 2008 15:30:47 +0900 Subject: block/md: fix md autodetection Block ext devt conversion missed md_autodetect_dev() call in rescan_partitions() leaving md autodetect unable to see partitions. Fix it. Signed-off-by: Tejun Heo Cc: Neil Brown Signed-off-by: Jens Axboe --- fs/partitions/check.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 63302534023..6d5b213b8a9 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -577,7 +577,7 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev) } #ifdef CONFIG_BLK_DEV_MD if (state->parts[p].flags & ADDPART_FLAG_RAID) - md_autodetect_dev(bdev->bd_dev+p); + md_autodetect_dev(part_to_dev(part)->devt); #endif } kfree(state); -- cgit v1.2.3-70-g09d2 From 561ec68e4de7947167937c49c451728e6b19e63b Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Fri, 14 Nov 2008 08:26:30 +0100 Subject: block: fix boot failure with CONFIG_DEBUG_BLOCK_EXT_DEVT=y and nash We run into system boot failure with kernel 2.6.28-rc. We found it on a couple of machines, including T61 notebook, nehalem machine, and another HPC NX6325 notebook. All the machines use FedoraCore 8 or FedoraCore 9. With kernel prior to 2.6.28-rc, system boot doesn't fail. I debug it and locate the root cause. Pls. see http://bugzilla.kernel.org/show_bug.cgi?id=11899 https://bugzilla.redhat.com/show_bug.cgi?id=471517 As a matter of fact, there are 2 bugs. 1)root=/dev/sda1, system boot randomly fails. Mostly, boot for 5 times and fails once. nash has a bug. Some of its functions misuse return value 0. Sometimes, 0 means timeout and no uevent available. Sometimes, 0 means nash gets an uevent, but the uevent isn't block-related (for exmaple, usb). If by coincidence, kernel tells nash that uevents are available, but kernel also set timeout, nash might stops collecting other uevents in queue if current uevent isn't block-related. I work out a patch for nash to fix it. http://bugzilla.kernel.org/attachment.cgi?id=18858 2) root=LABEL=/, system always can't boot. initrd init reports switchroot fails. Here is an executation branch of nash when booting: (1) nash read /sys/block/sda/dev; Assume major is 8 (on my desktop) (2) nash query /proc/devices with the major number; It found line "8 sd"; (3) nash use 'sd' to search its own probe table to find device (DISK) type for the device and add it to its own list; (4) Later on, it probes all devices in its list to get filesystem labels; scsi register "8 sd" always. When major is 259, nash fails to find the device(DISK) type. I enables CONFIG_DEBUG_BLOCK_EXT_DEVT=y when compiling kernel, so 259 is picked up for device /dev/sda1, which causes nash to fail to find device (DISK) type. To fixing issue 2), I create a patch for nash and another patch for kernel. http://bugzilla.kernel.org/attachment.cgi?id=18859 http://bugzilla.kernel.org/attachment.cgi?id=18837 Below is the patch for kernel 2.6.28-rc4. It registers blkext, a new block device in proc/devices. With 2 patches on nash and 1 patch on kernel, I boot my machines for dozens of times without failure. Signed-off-by Zhang Yanmin Acked-by: Tejun Heo Signed-off-by: Jens Axboe --- block/genhd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/block/genhd.c b/block/genhd.c index 4e5e7493f67..27549e470da 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -768,6 +768,8 @@ static int __init genhd_device_init(void) bdev_map = kobj_map_init(base_probe, &block_class_lock); blk_dev_init(); + register_blkdev(BLOCK_EXT_MAJOR, "blkext"); + #ifndef CONFIG_SYSFS_DEPRECATED /* create top-level block dir */ block_depr = kobject_create_and_add("block", NULL); -- cgit v1.2.3-70-g09d2 From 68aee07f9bad2c830a898cf6d6bfc11ea24efc40 Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Fri, 14 Nov 2008 09:44:33 +0100 Subject: Release old elevator on change elevator We should release old elevator when change to use a new one. Signed-off-by: Zhao Lei Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index b220c686089..2d19f0cc47f 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -338,12 +338,18 @@ wait: static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size) { struct request_queue *rq; + elevator_t *old_e; rq = blk_init_queue(do_blkif_request, &blkif_io_lock); if (rq == NULL) return -1; - elevator_init(rq, "noop"); + old_e = rq->elevator; + if (IS_ERR_VALUE(elevator_init(rq, "noop"))) + printk(KERN_WARNING + "blkfront: Switch elevator failed, use default\n"); + else + elevator_exit(old_e); /* Hard sector size and max sectors impersonate the equiv. hardware. */ blk_queue_hardsect_size(rq, sector_size); -- cgit v1.2.3-70-g09d2 From 98ba4031ab2adc8b394295e68aa4c8fe9d5060db Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Fri, 14 Nov 2008 10:44:59 +0100 Subject: relay: fix cpu offline problem relay_open() will close allocated buffers when failed. but if cpu offlined, some buffer will not be closed. this patch fixed it. and did cleanup for relay_reset() too. Signed-off-by: Lai Jiangshan Signed-off-by: Jens Axboe --- kernel/relay.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/kernel/relay.c b/kernel/relay.c index 8d13a7855c0..32b0befdcb6 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -400,7 +400,7 @@ void relay_reset(struct rchan *chan) } mutex_lock(&relay_channels_mutex); - for_each_online_cpu(i) + for_each_possible_cpu(i) if (chan->buf[i]) __relay_reset(chan->buf[i], 0); mutex_unlock(&relay_channels_mutex); @@ -611,10 +611,9 @@ struct rchan *relay_open(const char *base_filename, return chan; free_bufs: - for_each_online_cpu(i) { - if (!chan->buf[i]) - break; - relay_close_buf(chan->buf[i]); + for_each_possible_cpu(i) { + if (chan->buf[i]) + relay_close_buf(chan->buf[i]); } kref_put(&chan->kref, relay_destroy_channel); -- cgit v1.2.3-70-g09d2 From c26156b2534c75bb3cdedf76f6ad1340971cf5bd Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 18 Nov 2008 15:07:05 +0100 Subject: block: hold extra reference to bio in blk_rq_map_user_iov() If the size passed in is OK but we end up mapping too many segments, we call the unmap path directly like from IO completion. But from IO completion we have an extra reference to the bio, so this error case goes OOPS when it attempts to free and already free bio. Fix it by getting an extra reference to the bio before calling the unmap failure case. Reported-by: Petr Vandrovec Signed-off-by: Jens Axboe --- block/blk-map.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/block/blk-map.c b/block/blk-map.c index 4849fa36161..0f4b4b88181 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -217,6 +217,12 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq, return PTR_ERR(bio); if (bio->bi_size != len) { + /* + * Grab an extra reference to this bio, as bio_unmap_user() + * expects to be able to drop it twice as it happens on the + * normal IO completion path + */ + bio_get(bio); bio_endio(bio, 0); bio_unmap_user(bio); return -EINVAL; -- cgit v1.2.3-70-g09d2 From a6a0c4ca7edb378a8a7332501f097089cb1051c4 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Tue, 18 Nov 2008 06:56:51 -0800 Subject: suspend: use WARN not WARN_ON to print the message By using WARN(), kerneloops.org can collect which component is causing the delay and make statistics about that. suspend_test_finish() is currently the number 2 item but unless we can collect who's causing it we're not going to be able to fix the hot topic ones.. Signed-off-by: Arjan van de Ven Signed-off-by: Linus Torvalds --- kernel/power/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/power/main.c b/kernel/power/main.c index 19122cf6d82..b8f7ce9473e 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -174,7 +174,7 @@ static void suspend_test_finish(const char *label) * has some performance issues. The stack dump of a WARN_ON * is more likely to get the right attention than a printk... */ - WARN_ON(msec > (TEST_SUSPEND_SECONDS * 1000)); + WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label); } #else -- cgit v1.2.3-70-g09d2