From 46a243f72de931aad2632a0f3de3612534212ae9 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Sun, 15 Jan 2012 00:16:51 +0100 Subject: [SCSI] st: implement PM MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This implements basic power management for SCSI tapes. Signed-off-by: Oliver Neukum Acked-by: Kai Mäkisara Signed-off-by: James Bottomley --- drivers/scsi/st.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 9b28f39bac2..9262cdfa4b2 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -1177,6 +1177,7 @@ static int check_tape(struct scsi_tape *STp, struct file *filp) static int st_open(struct inode *inode, struct file *filp) { int i, retval = (-EIO); + int resumed = 0; struct scsi_tape *STp; struct st_partstat *STps; int dev = TAPE_NR(inode); @@ -1211,6 +1212,11 @@ static int st_open(struct inode *inode, struct file *filp) write_unlock(&st_dev_arr_lock); STp->rew_at_close = STp->autorew_dev = (iminor(inode) & 0x80) == 0; + if (scsi_autopm_get_device(STp->device) < 0) { + retval = -EIO; + goto err_out; + } + resumed = 1; if (!scsi_block_when_processing_errors(STp->device)) { retval = (-ENXIO); goto err_out; @@ -1258,6 +1264,8 @@ static int st_open(struct inode *inode, struct file *filp) normalize_buffer(STp->buffer); STp->in_use = 0; scsi_tape_put(STp); + if (resumed) + scsi_autopm_put_device(STp->device); mutex_unlock(&st_mutex); return retval; @@ -1391,6 +1399,7 @@ static int st_release(struct inode *inode, struct file *filp) write_lock(&st_dev_arr_lock); STp->in_use = 0; write_unlock(&st_dev_arr_lock); + scsi_autopm_put_device(STp->device); scsi_tape_put(STp); return result; @@ -4154,6 +4163,7 @@ static int st_probe(struct device *dev) if (error) goto out_free_tape; } + scsi_autopm_put_device(SDp); sdev_printk(KERN_NOTICE, SDp, "Attached scsi tape %s\n", tape_name(tpnt)); @@ -4201,6 +4211,7 @@ static int st_remove(struct device *dev) struct scsi_tape *tpnt; int i, j, mode; + scsi_autopm_get_device(SDp); write_lock(&st_dev_arr_lock); for (i = 0; i < st_dev_max; i++) { tpnt = scsi_tapes[i]; -- cgit v1.2.3-70-g09d2 From 5c4fb76af31e9dabcd132a0e69ed3799df1304c3 Mon Sep 17 00:00:00 2001 From: Mark Salyzyn Date: Tue, 17 Jan 2012 12:56:45 -0500 Subject: [SCSI] pm8001: fix lockup on phy_control hard reset. pm8001_phy_control PHY_FUNC_HARD_RESET locks up on second try via smp_phy_control because response HW_EVENT_PHY_START_STATUS fails to complete previous command. The PM8001F_RUN_TIME flag is not treated as a bit, but a state in all readers, yet once we are operational or in the run time state, the flags use a bit-set operation. Signed-off-by: Mark Salyzyn Acked-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_sas.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index fb3dc997886..7ae22a67bd3 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -615,7 +615,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev) wait_for_completion(&completion); if (dev->dev_type == SAS_END_DEV) msleep(50); - pm8001_ha->flags |= PM8001F_RUN_TIME ; + pm8001_ha->flags = PM8001F_RUN_TIME; return 0; found_out: spin_unlock_irqrestore(&pm8001_ha->lock, flags); -- cgit v1.2.3-70-g09d2 From d95d00016f8f51dc502cadb263d861bd8c0212bb Mon Sep 17 00:00:00 2001 From: Mark Salyzyn Date: Tue, 17 Jan 2012 09:18:57 -0500 Subject: [SCSI] pm8001: Add FUNC_GET_EVENTS Jack noticed I dropped a patch fragment associated with a flags automatic variable in mpi_set_phys_g3_with_ssc (ooops) and that the pre-emptive locking that piggy-backed this patch was not in-fact necessary because of underlying atomic accesses to the hardware. Here is the updated patch fixing these two issues. The pm8001 driver is missing the FUNC_GET_EVENTS handler in the phy control function. Since the pm8001_bar4_shift function was not designed to be called at runtime, added locking surrounding the adjustment for all accesses. Signed-off-by: Mark Salyzyn Acked-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_hwi.c | 85 ++++++++++++++++++++++++++++------------ drivers/scsi/pm8001/pm8001_sas.c | 24 +++++++++++- drivers/scsi/pm8001/pm8001_sas.h | 1 + 3 files changed, 83 insertions(+), 27 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index b7b92f7be2a..f3c44b96c1c 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -338,26 +338,25 @@ update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number) } /** - * bar4_shift - function is called to shift BAR base address - * @pm8001_ha : our hba card information + * pm8001_bar4_shift - function is called to shift BAR base address + * @pm8001_ha : our hba card infomation * @shiftValue : shifting value in memory bar. */ -static int bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue) +int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue) { u32 regVal; - u32 max_wait_count; + unsigned long start; /* program the inbound AXI translation Lower Address */ pm8001_cw32(pm8001_ha, 1, SPC_IBW_AXI_TRANSLATION_LOW, shiftValue); /* confirm the setting is written */ - max_wait_count = 1 * 1000 * 1000; /* 1 sec */ + start = jiffies + HZ; /* 1 sec */ do { - udelay(1); regVal = pm8001_cr32(pm8001_ha, 1, SPC_IBW_AXI_TRANSLATION_LOW); - } while ((regVal != shiftValue) && (--max_wait_count)); + } while ((regVal != shiftValue) && time_before(jiffies, start)); - if (!max_wait_count) { + if (regVal != shiftValue) { PM8001_INIT_DBG(pm8001_ha, pm8001_printk("TIMEOUT:SPC_IBW_AXI_TRANSLATION_LOW" " = 0x%x\n", regVal)); @@ -375,6 +374,7 @@ static void __devinit mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit) { u32 value, offset, i; + unsigned long flags; #define SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR 0x00030000 #define SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR 0x00040000 @@ -388,16 +388,23 @@ mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit) * Using shifted destination address 0x3_0000:0x1074 + 0x4000*N (N=0:3) * Using shifted destination address 0x4_0000:0x1074 + 0x4000*(N-4) (N=4:7) */ - if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR)) + spin_lock_irqsave(&pm8001_ha->lock, flags); + if (-1 == pm8001_bar4_shift(pm8001_ha, + SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); return; + } for (i = 0; i < 4; i++) { offset = SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET + 0x4000 * i; pm8001_cw32(pm8001_ha, 2, offset, 0x80001501); } /* shift membase 3 for SAS2_SETTINGS_LOCAL_PHY 4 - 7 */ - if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR)) + if (-1 == pm8001_bar4_shift(pm8001_ha, + SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); return; + } for (i = 4; i < 8; i++) { offset = SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET + 0x4000 * (i-4); pm8001_cw32(pm8001_ha, 2, offset, 0x80001501); @@ -421,7 +428,8 @@ mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit) pm8001_cw32(pm8001_ha, 2, 0xd8, 0x8000C016); /*set the shifted destination address to 0x0 to avoid error operation */ - bar4_shift(pm8001_ha, 0x0); + pm8001_bar4_shift(pm8001_ha, 0x0); + spin_unlock_irqrestore(&pm8001_ha->lock, flags); return; } @@ -437,6 +445,7 @@ mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha, u32 offset; u32 value; u32 i; + unsigned long flags; #define OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR 0x00030000 #define OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR 0x00040000 @@ -445,24 +454,30 @@ mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha, #define OPEN_RETRY_INTERVAL_REG_MASK 0x0000FFFF value = interval & OPEN_RETRY_INTERVAL_REG_MASK; + spin_lock_irqsave(&pm8001_ha->lock, flags); /* shift bar and set the OPEN_REJECT(RETRY) interval time of PHY 0 -3.*/ - if (-1 == bar4_shift(pm8001_ha, - OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR)) + if (-1 == pm8001_bar4_shift(pm8001_ha, + OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); return; + } for (i = 0; i < 4; i++) { offset = OPEN_RETRY_INTERVAL_PHY_0_3_OFFSET + 0x4000 * i; pm8001_cw32(pm8001_ha, 2, offset, value); } - if (-1 == bar4_shift(pm8001_ha, - OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR)) + if (-1 == pm8001_bar4_shift(pm8001_ha, + OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); return; + } for (i = 4; i < 8; i++) { offset = OPEN_RETRY_INTERVAL_PHY_4_7_OFFSET + 0x4000 * (i-4); pm8001_cw32(pm8001_ha, 2, offset, value); } /*set the shifted destination address to 0x0 to avoid error operation */ - bar4_shift(pm8001_ha, 0x0); + pm8001_bar4_shift(pm8001_ha, 0x0); + spin_unlock_irqrestore(&pm8001_ha->lock, flags); return; } @@ -688,8 +703,11 @@ static u32 soft_reset_ready_check(struct pm8001_hba_info *pm8001_ha) PM8001_INIT_DBG(pm8001_ha, pm8001_printk("Firmware is ready for reset .\n")); } else { - /* Trigger NMI twice via RB6 */ - if (-1 == bar4_shift(pm8001_ha, RB6_ACCESS_REG)) { + unsigned long flags; + /* Trigger NMI twice via RB6 */ + spin_lock_irqsave(&pm8001_ha->lock, flags); + if (-1 == pm8001_bar4_shift(pm8001_ha, RB6_ACCESS_REG)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Shift Bar4 to 0x%x failed\n", RB6_ACCESS_REG)); @@ -715,8 +733,10 @@ static u32 soft_reset_ready_check(struct pm8001_hba_info *pm8001_ha) PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("SCRATCH_PAD3 value = 0x%x\n", pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3))); + spin_unlock_irqrestore(&pm8001_ha->lock, flags); return -1; } + spin_unlock_irqrestore(&pm8001_ha->lock, flags); } return 0; } @@ -733,6 +753,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature) u32 regVal, toggleVal; u32 max_wait_count; u32 regVal1, regVal2, regVal3; + unsigned long flags; /* step1: Check FW is ready for soft reset */ if (soft_reset_ready_check(pm8001_ha) != 0) { @@ -743,7 +764,9 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature) /* step 2: clear NMI status register on AAP1 and IOP, write the same value to clear */ /* map 0x60000 to BAR4(0x20), BAR2(win) */ - if (-1 == bar4_shift(pm8001_ha, MBIC_AAP1_ADDR_BASE)) { + spin_lock_irqsave(&pm8001_ha->lock, flags); + if (-1 == pm8001_bar4_shift(pm8001_ha, MBIC_AAP1_ADDR_BASE)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Shift Bar4 to 0x%x failed\n", MBIC_AAP1_ADDR_BASE)); @@ -754,7 +777,8 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature) pm8001_printk("MBIC - NMI Enable VPE0 (IOP)= 0x%x\n", regVal)); pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP, 0x0); /* map 0x70000 to BAR4(0x20), BAR2(win) */ - if (-1 == bar4_shift(pm8001_ha, MBIC_IOP_ADDR_BASE)) { + if (-1 == pm8001_bar4_shift(pm8001_ha, MBIC_IOP_ADDR_BASE)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Shift Bar4 to 0x%x failed\n", MBIC_IOP_ADDR_BASE)); @@ -796,7 +820,8 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature) /* read required registers for confirmming */ /* map 0x0700000 to BAR4(0x20), BAR2(win) */ - if (-1 == bar4_shift(pm8001_ha, GSM_ADDR_BASE)) { + if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_ADDR_BASE)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Shift Bar4 to 0x%x failed\n", GSM_ADDR_BASE)); @@ -862,7 +887,8 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature) /* step 5: delay 10 usec */ udelay(10); /* step 5-b: set GPIO-0 output control to tristate anyway */ - if (-1 == bar4_shift(pm8001_ha, GPIO_ADDR_BASE)) { + if (-1 == pm8001_bar4_shift(pm8001_ha, GPIO_ADDR_BASE)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); PM8001_INIT_DBG(pm8001_ha, pm8001_printk("Shift Bar4 to 0x%x failed\n", GPIO_ADDR_BASE)); @@ -878,7 +904,8 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature) /* Step 6: Reset the IOP and AAP1 */ /* map 0x00000 to BAR4(0x20), BAR2(win) */ - if (-1 == bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) { + if (-1 == pm8001_bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("SPC Shift Bar4 to 0x%x failed\n", SPC_TOP_LEVEL_ADDR_BASE)); @@ -915,7 +942,8 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature) /* step 11: reads and sets the GSM Configuration and Reset Register */ /* map 0x0700000 to BAR4(0x20), BAR2(win) */ - if (-1 == bar4_shift(pm8001_ha, GSM_ADDR_BASE)) { + if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_ADDR_BASE)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("SPC Shift Bar4 to 0x%x failed\n", GSM_ADDR_BASE)); @@ -968,7 +996,8 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature) /* step 13: bring the IOP and AAP1 out of reset */ /* map 0x00000 to BAR4(0x20), BAR2(win) */ - if (-1 == bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) { + if (-1 == pm8001_bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Shift Bar4 to 0x%x failed\n", SPC_TOP_LEVEL_ADDR_BASE)); @@ -1010,6 +1039,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature) pm8001_printk("SCRATCH_PAD3 value = 0x%x\n", pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3))); + spin_unlock_irqrestore(&pm8001_ha->lock, flags); return -1; } @@ -1039,9 +1069,12 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature) pm8001_printk("SCRATCH_PAD3 value = 0x%x\n", pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3))); + spin_unlock_irqrestore(&pm8001_ha->lock, flags); return -1; } } + pm8001_bar4_shift(pm8001_ha, 0); + spin_unlock_irqrestore(&pm8001_ha->lock, flags); PM8001_INIT_DBG(pm8001_ha, pm8001_printk("SPC soft reset Complete\n")); @@ -1157,8 +1190,8 @@ pm8001_chip_msix_interrupt_disable(struct pm8001_hba_info *pm8001_ha, msi_index = int_vec_idx * MSIX_TABLE_ELEMENT_SIZE; msi_index += MSIX_TABLE_BASE; pm8001_cw32(pm8001_ha, 0, msi_index, MSIX_INTERRUPT_DISABLE); - } + /** * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt * @pm8001_ha: our hba card information diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 7ae22a67bd3..ab0704e3904 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -166,6 +166,7 @@ int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func, struct pm8001_hba_info *pm8001_ha = NULL; struct sas_phy_linkrates *rates; DECLARE_COMPLETION_ONSTACK(completion); + unsigned long flags; pm8001_ha = sas_phy->ha->lldd_ha; pm8001_ha->phy[phy_id].enable_completion = &completion; switch (func) { @@ -209,8 +210,29 @@ int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func, case PHY_FUNC_DISABLE: PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id); break; + case PHY_FUNC_GET_EVENTS: + spin_lock_irqsave(&pm8001_ha->lock, flags); + if (-1 == pm8001_bar4_shift(pm8001_ha, + (phy_id < 4) ? 0x30000 : 0x40000)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + return -EINVAL; + } + { + struct sas_phy *phy = sas_phy->phy; + uint32_t *qp = (uint32_t *)(((char *) + pm8001_ha->io_mem[2].memvirtaddr) + + 0x1034 + (0x4000 * (phy_id & 3))); + + phy->invalid_dword_count = qp[0]; + phy->running_disparity_error_count = qp[1]; + phy->loss_of_dword_sync_count = qp[3]; + phy->phy_reset_problem_count = qp[4]; + } + pm8001_bar4_shift(pm8001_ha, 0); + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + return 0; default: - rc = -ENOSYS; + rc = -EOPNOTSUPP; } msleep(300); return rc; diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index 93959febe20..83a48f3247b 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -488,6 +488,7 @@ int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr, dma_addr_t *pphys_addr, u32 *pphys_addr_hi, u32 *pphys_addr_lo, u32 mem_size, u32 align); +int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue); /* ctl shared API */ extern struct device_attribute *pm8001_host_attrs[]; -- cgit v1.2.3-70-g09d2 From 5954d7380f627371c4d8d7c59c08f9596aa2c674 Mon Sep 17 00:00:00 2001 From: Mark Salyzyn Date: Tue, 17 Jan 2012 11:52:24 -0500 Subject: [SCSI] pm8001: deficient responses to IO_XFER_ERROR_BREAK and IO_XFER_OPEN_RETRY_TIMEOUT IO_XFER_ERROR_BREAK and IO_XFER_OPEN_RETRY_TIMEOUT are deficient of the required actions as outlined in the programming manual for the pm8001. Due to the overlapping code requirements of these recovery responses, we found it necessary to bundle them together into one patch. When a break is received during the command phase (ssp_completion), this is a result of a timeout or interruption on the bus. Logic suggests that we should retry the command. When a break is received during the data-phase (ssp_event), the task must be aborted on the target or it will retain a data-phase lock turning the target reticent to all future media commands yet will successfully respond to TUR, INQUIRY and ABORT leading eventually to target failure through several abort-cycle loops. The open retry interval is exceedingly short resulting in occasional target drop-off during expander resets or when targets push-back during bad-block remapping. Increased effective timeout from 130ms to 1.5 seconds for each try so as to trigger after the administrative inquiry/tur timeout in the scsi subsystem to keep error-recovery harmonics to a minimum. When an open retry timeout event is received, the action required by the targets is to issue an abort for the outstanding command then logic suggests we retry the command as this state is usually an indication of a credit block or busy condition on the target. We hijacked the pm8001_handle_event work queue handler so that it will handle task as an argument instead of device for the workers in support of the deferred handling outlined above. Moderate to Heavy bad-path testing on a 2.6.32 vintage kernel, compile-testing on scsi-misc-2.6 kernel ... Signed-off-by: Mark Salyzyn Acked-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_hwi.c | 196 ++++++++++++++++++++++++++++++++++++--- drivers/scsi/pm8001/pm8001_sas.c | 72 ++++++++++++++ drivers/scsi/pm8001/pm8001_sas.h | 5 + 3 files changed, 261 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index f3c44b96c1c..3920b49f4f5 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -622,7 +622,8 @@ static int __devinit pm8001_chip_init(struct pm8001_hba_info *pm8001_ha) update_inbnd_queue_table(pm8001_ha, 0); update_outbnd_queue_table(pm8001_ha, 0); mpi_set_phys_g3_with_ssc(pm8001_ha, 0); - mpi_set_open_retry_interval_reg(pm8001_ha, 7); + /* 7->130ms, 34->500ms, 119->1.5s */ + mpi_set_open_retry_interval_reg(pm8001_ha, 119); /* notify firmware update finished and check initialization status */ if (0 == mpi_init_check(pm8001_ha)) { PM8001_INIT_DBG(pm8001_ha, @@ -1421,24 +1422,191 @@ static void pm8001_work_fn(struct work_struct *work) struct pm8001_device *pm8001_dev; struct domain_device *dev; + /* + * So far, all users of this stash an associated structure here. + * If we get here, and this pointer is null, then the action + * was cancelled. This nullification happens when the device + * goes away. + */ + pm8001_dev = pw->data; /* Most stash device structure */ + if ((pm8001_dev == NULL) + || ((pw->handler != IO_XFER_ERROR_BREAK) + && (pm8001_dev->dev_type == NO_DEVICE))) { + kfree(pw); + return; + } + switch (pw->handler) { + case IO_XFER_ERROR_BREAK: + { /* This one stashes the sas_task instead */ + struct sas_task *t = (struct sas_task *)pm8001_dev; + u32 tag; + struct pm8001_ccb_info *ccb; + struct pm8001_hba_info *pm8001_ha = pw->pm8001_ha; + unsigned long flags, flags1; + struct task_status_struct *ts; + int i; + + if (pm8001_query_task(t) == TMF_RESP_FUNC_SUCC) + break; /* Task still on lu */ + spin_lock_irqsave(&pm8001_ha->lock, flags); + + spin_lock_irqsave(&t->task_state_lock, flags1); + if (unlikely((t->task_state_flags & SAS_TASK_STATE_DONE))) { + spin_unlock_irqrestore(&t->task_state_lock, flags1); + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + break; /* Task got completed by another */ + } + spin_unlock_irqrestore(&t->task_state_lock, flags1); + + /* Search for a possible ccb that matches the task */ + for (i = 0; ccb = NULL, i < PM8001_MAX_CCB; i++) { + ccb = &pm8001_ha->ccb_info[i]; + tag = ccb->ccb_tag; + if ((tag != 0xFFFFFFFF) && (ccb->task == t)) + break; + } + if (!ccb) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + break; /* Task got freed by another */ + } + ts = &t->task_status; + ts->resp = SAS_TASK_COMPLETE; + /* Force the midlayer to retry */ + ts->stat = SAS_QUEUE_FULL; + pm8001_dev = ccb->device; + if (pm8001_dev) + pm8001_dev->running_req--; + spin_lock_irqsave(&t->task_state_lock, flags1); + t->task_state_flags &= ~SAS_TASK_STATE_PENDING; + t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; + t->task_state_flags |= SAS_TASK_STATE_DONE; + if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { + spin_unlock_irqrestore(&t->task_state_lock, flags1); + PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p" + " done with event 0x%x resp 0x%x stat 0x%x but" + " aborted by upper layer!\n", + t, pw->handler, ts->resp, ts->stat)); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + } else { + spin_unlock_irqrestore(&t->task_state_lock, flags1); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/* in order to force CPU ordering */ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + t->task_done(t); + } + } break; + case IO_XFER_OPEN_RETRY_TIMEOUT: + { /* This one stashes the sas_task instead */ + struct sas_task *t = (struct sas_task *)pm8001_dev; + u32 tag; + struct pm8001_ccb_info *ccb; + struct pm8001_hba_info *pm8001_ha = pw->pm8001_ha; + unsigned long flags, flags1; + int i, ret = 0; + + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); + + ret = pm8001_query_task(t); + + PM8001_IO_DBG(pm8001_ha, + switch (ret) { + case TMF_RESP_FUNC_SUCC: + pm8001_printk("...Task on lu\n"); + break; + + case TMF_RESP_FUNC_COMPLETE: + pm8001_printk("...Task NOT on lu\n"); + break; + + default: + pm8001_printk("...query task failed!!!\n"); + break; + }); + + spin_lock_irqsave(&pm8001_ha->lock, flags); + + spin_lock_irqsave(&t->task_state_lock, flags1); + + if (unlikely((t->task_state_flags & SAS_TASK_STATE_DONE))) { + spin_unlock_irqrestore(&t->task_state_lock, flags1); + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + if (ret == TMF_RESP_FUNC_SUCC) /* task on lu */ + (void)pm8001_abort_task(t); + break; /* Task got completed by another */ + } + + spin_unlock_irqrestore(&t->task_state_lock, flags1); + + /* Search for a possible ccb that matches the task */ + for (i = 0; ccb = NULL, i < PM8001_MAX_CCB; i++) { + ccb = &pm8001_ha->ccb_info[i]; + tag = ccb->ccb_tag; + if ((tag != 0xFFFFFFFF) && (ccb->task == t)) + break; + } + if (!ccb) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + if (ret == TMF_RESP_FUNC_SUCC) /* task on lu */ + (void)pm8001_abort_task(t); + break; /* Task got freed by another */ + } + + pm8001_dev = ccb->device; + dev = pm8001_dev->sas_device; + + switch (ret) { + case TMF_RESP_FUNC_SUCC: /* task on lu */ + ccb->open_retry = 1; /* Snub completion */ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + ret = pm8001_abort_task(t); + ccb->open_retry = 0; + switch (ret) { + case TMF_RESP_FUNC_SUCC: + case TMF_RESP_FUNC_COMPLETE: + break; + default: /* device misbehavior */ + ret = TMF_RESP_FUNC_FAILED; + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("...Reset phy\n")); + pm8001_I_T_nexus_reset(dev); + break; + } + break; + + case TMF_RESP_FUNC_COMPLETE: /* task not on lu */ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + /* Do we need to abort the task locally? */ + break; + + default: /* device misbehavior */ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + ret = TMF_RESP_FUNC_FAILED; + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("...Reset phy\n")); + pm8001_I_T_nexus_reset(dev); + } + + if (ret == TMF_RESP_FUNC_FAILED) + t = NULL; + pm8001_open_reject_retry(pm8001_ha, t, pm8001_dev); + PM8001_IO_DBG(pm8001_ha, pm8001_printk("...Complete\n")); + } break; case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: - pm8001_dev = pw->data; dev = pm8001_dev->sas_device; pm8001_I_T_nexus_reset(dev); break; case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY: - pm8001_dev = pw->data; dev = pm8001_dev->sas_device; pm8001_I_T_nexus_reset(dev); break; case IO_DS_IN_ERROR: - pm8001_dev = pw->data; dev = pm8001_dev->sas_device; pm8001_I_T_nexus_reset(dev); break; case IO_DS_NON_OPERATIONAL: - pm8001_dev = pw->data; dev = pm8001_dev->sas_device; pm8001_I_T_nexus_reset(dev); break; @@ -1493,6 +1661,11 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb) status = le32_to_cpu(psspPayload->status); tag = le32_to_cpu(psspPayload->tag); ccb = &pm8001_ha->ccb_info[tag]; + if ((status == IO_ABORTED) && ccb->open_retry) { + /* Being completed by another */ + ccb->open_retry = 0; + return; + } pm8001_dev = ccb->device; param = le32_to_cpu(psspPayload->param); @@ -1548,6 +1721,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb) pm8001_printk("IO_XFER_ERROR_BREAK\n")); ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_OPEN_REJECT; + /* Force the midlayer to retry */ + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; break; case IO_XFER_ERROR_PHY_NOT_READY: PM8001_IO_DBG(pm8001_ha, @@ -1752,9 +1927,8 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb) case IO_XFER_ERROR_BREAK: PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_XFER_ERROR_BREAK\n")); - ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAS_INTERRUPTED; - break; + pm8001_handle_event(pm8001_ha, t, IO_XFER_ERROR_BREAK); + return; case IO_XFER_ERROR_PHY_NOT_READY: PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); @@ -1833,10 +2007,8 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb) case IO_XFER_OPEN_RETRY_TIMEOUT: PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); - ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAS_OPEN_REJECT; - ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; - break; + pm8001_handle_event(pm8001_ha, t, IO_XFER_OPEN_RETRY_TIMEOUT); + return; case IO_XFER_ERROR_UNEXPECTED_PHASE: PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n")); diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index ab0704e3904..9589fc941a8 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -538,6 +538,7 @@ void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha, task->lldd_task = NULL; ccb->task = NULL; ccb->ccb_tag = 0xFFFFFFFF; + ccb->open_retry = 0; pm8001_ccb_free(pm8001_ha, ccb_idx); } @@ -882,6 +883,77 @@ static int pm8001_issue_ssp_tmf(struct domain_device *dev, tmf); } +/* retry commands by ha, by task and/or by device */ +void pm8001_open_reject_retry( + struct pm8001_hba_info *pm8001_ha, + struct sas_task *task_to_close, + struct pm8001_device *device_to_close) +{ + int i; + unsigned long flags; + + if (pm8001_ha == NULL) + return; + + spin_lock_irqsave(&pm8001_ha->lock, flags); + + for (i = 0; i < PM8001_MAX_CCB; i++) { + struct sas_task *task; + struct task_status_struct *ts; + struct pm8001_device *pm8001_dev; + unsigned long flags1; + u32 tag; + struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i]; + + pm8001_dev = ccb->device; + if (!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE)) + continue; + if (!device_to_close) { + uintptr_t d = (uintptr_t)pm8001_dev + - (uintptr_t)&pm8001_ha->devices; + if (((d % sizeof(*pm8001_dev)) != 0) + || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES)) + continue; + } else if (pm8001_dev != device_to_close) + continue; + tag = ccb->ccb_tag; + if (!tag || (tag == 0xFFFFFFFF)) + continue; + task = ccb->task; + if (!task || !task->task_done) + continue; + if (task_to_close && (task != task_to_close)) + continue; + ts = &task->task_status; + ts->resp = SAS_TASK_COMPLETE; + /* Force the midlayer to retry */ + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + if (pm8001_dev) + pm8001_dev->running_req--; + spin_lock_irqsave(&task->task_state_lock, flags1); + task->task_state_flags &= ~SAS_TASK_STATE_PENDING; + task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; + task->task_state_flags |= SAS_TASK_STATE_DONE; + if (unlikely((task->task_state_flags + & SAS_TASK_STATE_ABORTED))) { + spin_unlock_irqrestore(&task->task_state_lock, + flags1); + pm8001_ccb_task_free(pm8001_ha, task, ccb, tag); + } else { + spin_unlock_irqrestore(&task->task_state_lock, + flags1); + pm8001_ccb_task_free(pm8001_ha, task, ccb, tag); + mb();/* in order to force CPU ordering */ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + task->task_done(task); + spin_lock_irqsave(&pm8001_ha->lock, flags); + } + } + + spin_unlock_irqrestore(&pm8001_ha->lock, flags); +} + /** * Standard mandates link reset for ATA (type 0) and hard reset for * SSP (type 1) , only for RECOVERY diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h index 83a48f3247b..11008205aeb 100644 --- a/drivers/scsi/pm8001/pm8001_sas.h +++ b/drivers/scsi/pm8001/pm8001_sas.h @@ -235,6 +235,7 @@ struct pm8001_ccb_info { struct pm8001_device *device; struct pm8001_prd buf_prd[PM8001_MAX_DMA_SG]; struct fw_control_ex *fw_control_context; + u8 open_retry; }; struct mpi_mem { @@ -484,6 +485,10 @@ void pm8001_dev_gone(struct domain_device *dev); int pm8001_lu_reset(struct domain_device *dev, u8 *lun); int pm8001_I_T_nexus_reset(struct domain_device *dev); int pm8001_query_task(struct sas_task *task); +void pm8001_open_reject_retry( + struct pm8001_hba_info *pm8001_ha, + struct sas_task *task_to_close, + struct pm8001_device *device_to_close); int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr, dma_addr_t *pphys_addr, u32 *pphys_addr_hi, u32 *pphys_addr_lo, u32 mem_size, u32 align); -- cgit v1.2.3-70-g09d2 From 3ef6d24cd9f473518dd7941e86cc2a5f8992eed0 Mon Sep 17 00:00:00 2001 From: James Smart Date: Wed, 18 Jan 2012 16:23:48 -0500 Subject: [SCSI] lpfc 8.3.29: BSG and User interface fixes BSG and User interface fixes: - Fix driver processing an els command using 16Gb FC Adapter (126345) - Change SLI4 FC port internal loopback to inner internal (126409) - Fix bug with driver dump command type 4 using 16Gb FC Adapter (126406) - Create character device to take a reference on the driver (126082) Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_bsg.c | 14 ++++++++++--- drivers/scsi/lpfc/lpfc_hw.h | 4 +++- drivers/scsi/lpfc/lpfc_init.c | 48 +++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/lpfc/lpfc_sli.c | 2 +- 4 files changed, 63 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index 56a86baece5..6cb360d47ba 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -589,7 +589,10 @@ lpfc_bsg_rport_els(struct fc_bsg_job *job) } cmdiocbq->iocb.un.elsreq64.bdl.bdeSize = (request_nseg + reply_nseg) * sizeof(struct ulp_bde64); - cmdiocbq->iocb.ulpContext = rpi; + if (phba->sli_rev == LPFC_SLI_REV4) + cmdiocbq->iocb.ulpContext = phba->sli4_hba.rpi_ids[rpi]; + else + cmdiocbq->iocb.ulpContext = rpi; cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC; cmdiocbq->context1 = NULL; cmdiocbq->context2 = NULL; @@ -1768,7 +1771,7 @@ lpfc_sli4_bsg_set_internal_loopback(struct lpfc_hba *phba) bf_set(lpfc_mbx_set_diag_state_link_type, &link_diag_loopback->u.req, phba->sli4_hba.lnk_info.lnk_tp); bf_set(lpfc_mbx_set_diag_lpbk_type, &link_diag_loopback->u.req, - LPFC_DIAG_LOOPBACK_TYPE_SERDES); + LPFC_DIAG_LOOPBACK_TYPE_INTERNAL); mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO); if ((mbxstatus != MBX_SUCCESS) || (pmboxq->u.mb.mbxStatus)) { @@ -4556,7 +4559,12 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, + sizeof(MAILBOX_t)); } } else if (phba->sli_rev == LPFC_SLI_REV4) { - if (pmb->mbxCommand == MBX_DUMP_MEMORY) { + /* Let type 4 (well known data) through because the data is + * returned in varwords[4-8] + * otherwise check the recieve length and fetch the buffer addr + */ + if ((pmb->mbxCommand == MBX_DUMP_MEMORY) && + (pmb->un.varDmp.type != DMP_WELL_KNOWN)) { /* rebuild the command for sli4 using our own buffers * like we do for biu diags */ diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 7245bead375..7b3dbf316bb 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2010 Emulex. All rights reserved. * + * Copyright (C) 2004-2011 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -2567,6 +2567,8 @@ typedef struct { #define DMP_MEM_REG 0x1 #define DMP_NV_PARAMS 0x2 +#define DMP_LMSD 0x3 /* Link Module Serial Data */ +#define DMP_WELL_KNOWN 0x4 #define DMP_REGION_VPD 0xe #define DMP_VPD_SIZE 0x400 /* maximum amount of VPD */ diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index dfea2dada02..d670b1c410e 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -10012,6 +10013,36 @@ lpfc_io_resume(struct pci_dev *pdev) return; } +/** + * lpfc_mgmt_open - method called when 'lpfcmgmt' is opened from userspace + * @inode: pointer to the inode representing the lpfcmgmt device + * @filep: pointer to the file representing the open lpfcmgmt device + * + * This routine puts a reference count on the lpfc module whenever the + * character device is opened + **/ +static int +lpfc_mgmt_open(struct inode *inode, struct file *filep) +{ + try_module_get(THIS_MODULE); + return 0; +} + +/** + * lpfc_mgmt_release - method called when 'lpfcmgmt' is closed in userspace + * @inode: pointer to the inode representing the lpfcmgmt device + * @filep: pointer to the file representing the open lpfcmgmt device + * + * This routine removes a reference count from the lpfc module when the + * character device is closed + **/ +static int +lpfc_mgmt_release(struct inode *inode, struct file *filep) +{ + module_put(THIS_MODULE); + return 0; +} + static struct pci_device_id lpfc_id_table[] = { {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER, PCI_ANY_ID, PCI_ANY_ID, }, @@ -10124,6 +10155,17 @@ static struct pci_driver lpfc_driver = { .err_handler = &lpfc_err_handler, }; +static const struct file_operations lpfc_mgmt_fop = { + .open = lpfc_mgmt_open, + .release = lpfc_mgmt_release, +}; + +static struct miscdevice lpfc_mgmt_dev = { + .minor = MISC_DYNAMIC_MINOR, + .name = "lpfcmgmt", + .fops = &lpfc_mgmt_fop, +}; + /** * lpfc_init - lpfc module initialization routine * @@ -10144,6 +10186,11 @@ lpfc_init(void) printk(LPFC_MODULE_DESC "\n"); printk(LPFC_COPYRIGHT "\n"); + error = misc_register(&lpfc_mgmt_dev); + if (error) + printk(KERN_ERR "Could not register lpfcmgmt device, " + "misc_register returned with status %d", error); + if (lpfc_enable_npiv) { lpfc_transport_functions.vport_create = lpfc_vport_create; lpfc_transport_functions.vport_delete = lpfc_vport_delete; @@ -10180,6 +10227,7 @@ lpfc_init(void) static void __exit lpfc_exit(void) { + misc_deregister(&lpfc_mgmt_dev); pci_unregister_driver(&lpfc_driver); fc_release_transport(lpfc_transport_template); if (lpfc_enable_npiv) diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 23a27592388..42ea367ddba 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -7763,7 +7763,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, bf_set(wqe_ct, &wqe->els_req.wqe_com, 1); bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com, phba->vpi_ids[phba->pport->vpi]); - } else if (iocbq->context1) { + } else if (pcmd && iocbq->context1) { bf_set(wqe_ct, &wqe->els_req.wqe_com, 0); bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com, phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]); -- cgit v1.2.3-70-g09d2 From 6b5151fd7baec6812fece993ddd7a2cf9fd0125f Mon Sep 17 00:00:00 2001 From: James Smart Date: Wed, 18 Jan 2012 16:24:06 -0500 Subject: [SCSI] lpfc 8.3.29: SLI related fixes SLI related fixes: - Fix REG_RPI fails on SLI4 HBA putting NPort into NPR state (126230) - Fix ELS FDISC failing with local reject / invalid RPI. (126350) - Fix reset port when reset is needed during fw_dump (125807) - Fix unbounded firmware revision string from port cause panic (126560) - Fix driver behavior when receiving an ADISC (126654) - Fix driver not returning when bad ndlp found in abts error event handling (126209) - Add more driver logs in area of SLI4 port error attention and reset recovery (126813, 124466) - Fix failure in handling large CQ/EQ identifiers in an IOV environment (126856) - Fix for driver using duplicate RPIs after lancer port reset (126723) - Clear vport->fc_myDID in lpfc_els_issue_fdisc to guarentee a zero SID (126779, 126897) - Fix for SLI4 Port delivery for BLS ABORT ACC (126289) Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 12 ++++-- drivers/scsi/lpfc/lpfc_bsg.c | 4 +- drivers/scsi/lpfc/lpfc_crtn.h | 1 + drivers/scsi/lpfc/lpfc_ct.c | 4 +- drivers/scsi/lpfc/lpfc_els.c | 3 +- drivers/scsi/lpfc/lpfc_hw.h | 1 + drivers/scsi/lpfc/lpfc_hw4.h | 26 +++++++++---- drivers/scsi/lpfc/lpfc_init.c | 64 ++++++++++++++++++++++++++++---- drivers/scsi/lpfc/lpfc_nportdisc.c | 76 ++++++++++++++++++++++++++++++++++++-- drivers/scsi/lpfc/lpfc_sli.c | 47 +++++++++++++++++++---- drivers/scsi/lpfc/lpfc_sli4.h | 3 +- 11 files changed, 207 insertions(+), 34 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index f6697cb0e21..296ad5bc424 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -353,7 +353,7 @@ lpfc_fwrev_show(struct device *dev, struct device_attribute *attr, struct lpfc_hba *phba = vport->phba; uint32_t if_type; uint8_t sli_family; - char fwrev[32]; + char fwrev[FW_REV_STR_SIZE]; int len; lpfc_decode_firmware_rev(phba, fwrev, 1); @@ -922,11 +922,15 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) rc = lpfc_sli4_pdev_status_reg_wait(phba); if (rc == -EPERM) { - /* no privilage for reset, restore if needed */ - if (before_fc_flag & FC_OFFLINE_MODE) - goto out; + /* no privilage for reset */ + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "3150 No privilage to perform the requested " + "access: x%x\n", reg_val); } else if (rc == -EIO) { /* reset failed, there is nothing more we can do */ + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "3153 Fail to perform the requested " + "access: x%x\n", reg_val); return rc; } diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index 6cb360d47ba..141e4b40bb5 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -3980,7 +3980,7 @@ lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, case COMN_OPCODE_GET_CNTL_ADDL_ATTRIBUTES: lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, "3106 Handled SLI_CONFIG " - "subsys_fcoe, opcode:x%x\n", + "subsys_comn, opcode:x%x\n", opcode); rc = lpfc_bsg_sli_cfg_read_cmd_ext(phba, job, nemb_mse, dmabuf); @@ -3988,7 +3988,7 @@ lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, default: lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, "3107 Reject SLI_CONFIG " - "subsys_fcoe, opcode:x%x\n", + "subsys_comn, opcode:x%x\n", opcode); rc = -EPERM; break; diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 26924b7a6cd..330dd7192a7 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -462,3 +462,4 @@ int lpfc_issue_unreg_vfi(struct lpfc_vport *); int lpfc_selective_reset(struct lpfc_hba *); int lpfc_sli4_read_config(struct lpfc_hba *phba); int lpfc_scsi_buf_update(struct lpfc_hba *phba); +void lpfc_sli4_node_prep(struct lpfc_hba *phba); diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index 707081d0a22..93e96b3c909 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -1076,7 +1076,7 @@ int lpfc_vport_symbolic_node_name(struct lpfc_vport *vport, char *symbol, size_t size) { - char fwrev[16]; + char fwrev[FW_REV_STR_SIZE]; int n; lpfc_decode_firmware_rev(vport->phba, fwrev, 0); @@ -1834,7 +1834,7 @@ lpfc_decode_firmware_rev(struct lpfc_hba *phba, char *fwrevision, int flag) uint8_t *fwname; if (phba->sli_rev == LPFC_SLI_REV4) - sprintf(fwrevision, "%s", vp->rev.opFwName); + snprintf(fwrevision, FW_REV_STR_SIZE, "%s", vp->rev.opFwName); else if (vp->rev.rBit) { if (psli->sli_flag & LPFC_SLI_ACTIVE) rev = vp->rev.sli2FwRev; diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 7afc757338d..2e7709f680b 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -7172,7 +7172,7 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, goto out; /* FDISC failed */ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS, - "0126 FDISC failed. (%d/%d)\n", + "0126 FDISC failed. (x%x/x%x)\n", irsp->ulpStatus, irsp->un.ulpWord[4]); goto fdisc_failed; } @@ -7283,6 +7283,7 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, int rc; vport->port_state = LPFC_FDISC; + vport->fc_myDID = 0; cmdsize = (sizeof(uint32_t) + sizeof(struct serv_parm)); elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp, did, ELS_CMD_FDISC); diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 7b3dbf316bb..5f280b5ae3d 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -70,6 +70,7 @@ /* vendor ID used in SCSI netlink calls */ #define LPFC_NL_VENDOR_ID (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX) +#define FW_REV_STR_SIZE 32 /* Common Transport structures and definitions */ union CtRevisionId { diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index e5bfa7f334e..cc19bc1b5ac 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -715,12 +715,20 @@ struct lpfc_register { #define lpfc_eqcq_doorbell_eqci_SHIFT 9 #define lpfc_eqcq_doorbell_eqci_MASK 0x0001 #define lpfc_eqcq_doorbell_eqci_WORD word0 -#define lpfc_eqcq_doorbell_cqid_SHIFT 0 -#define lpfc_eqcq_doorbell_cqid_MASK 0x03FF -#define lpfc_eqcq_doorbell_cqid_WORD word0 -#define lpfc_eqcq_doorbell_eqid_SHIFT 0 -#define lpfc_eqcq_doorbell_eqid_MASK 0x01FF -#define lpfc_eqcq_doorbell_eqid_WORD word0 +#define lpfc_eqcq_doorbell_cqid_lo_SHIFT 0 +#define lpfc_eqcq_doorbell_cqid_lo_MASK 0x03FF +#define lpfc_eqcq_doorbell_cqid_lo_WORD word0 +#define lpfc_eqcq_doorbell_cqid_hi_SHIFT 11 +#define lpfc_eqcq_doorbell_cqid_hi_MASK 0x001F +#define lpfc_eqcq_doorbell_cqid_hi_WORD word0 +#define lpfc_eqcq_doorbell_eqid_lo_SHIFT 0 +#define lpfc_eqcq_doorbell_eqid_lo_MASK 0x01FF +#define lpfc_eqcq_doorbell_eqid_lo_WORD word0 +#define lpfc_eqcq_doorbell_eqid_hi_SHIFT 11 +#define lpfc_eqcq_doorbell_eqid_hi_MASK 0x001F +#define lpfc_eqcq_doorbell_eqid_hi_WORD word0 +#define LPFC_CQID_HI_FIELD_SHIFT 10 +#define LPFC_EQID_HI_FIELD_SHIFT 9 #define LPFC_BMBX 0x0160 #define lpfc_bmbx_addr_SHIFT 2 @@ -3313,7 +3321,11 @@ struct xmit_bls_rsp64_wqe { uint32_t rsrvd4; struct wqe_did wqe_dest; struct wqe_common wqe_com; /* words 6-11 */ - uint32_t rsvd_12_15[4]; + uint32_t word12; +#define xmit_bls_rsp64_temprpi_SHIFT 0 +#define xmit_bls_rsp64_temprpi_MASK 0x0000ffff +#define xmit_bls_rsp64_temprpi_WORD word12 + uint32_t rsvd_13_15[3]; }; struct wqe_rctl_dfctl { diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index d670b1c410e..f3ad7349f5d 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1475,8 +1475,12 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba) phba->sli4_hba.u.if_type2.STATUSregaddr, &portstat_reg.word0); /* consider PCI bus read error as pci_channel_offline */ - if (pci_rd_rc1 == -EIO) + if (pci_rd_rc1 == -EIO) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3151 PCI bus read access failure: x%x\n", + readl(phba->sli4_hba.u.if_type2.STATUSregaddr)); return; + } reg_err1 = readl(phba->sli4_hba.u.if_type2.ERR1regaddr); reg_err2 = readl(phba->sli4_hba.u.if_type2.ERR2regaddr); if (bf_get(lpfc_sliport_status_oti, &portstat_reg)) { @@ -1526,6 +1530,9 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba) } /* fall through for not able to recover */ } + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3152 Unrecoverable error, bring the port " + "offline\n"); lpfc_sli4_offline_eratt(phba); break; case LPFC_SLI_INTF_IF_TYPE_1: @@ -2513,6 +2520,42 @@ lpfc_block_mgmt_io(struct lpfc_hba * phba) } } +/** + * lpfc_sli4_node_prep - Assign RPIs for active nodes. + * @phba: pointer to lpfc hba data structure. + * + * Allocate RPIs for all active remote nodes. This is needed whenever + * an SLI4 adapter is reset and the driver is not unloading. Its purpose + * is to fixup the temporary rpi assignments. + **/ +void +lpfc_sli4_node_prep(struct lpfc_hba *phba) +{ + struct lpfc_nodelist *ndlp, *next_ndlp; + struct lpfc_vport **vports; + int i; + + if (phba->sli_rev != LPFC_SLI_REV4) + return; + + vports = lpfc_create_vport_work_array(phba); + if (vports != NULL) { + for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { + if (vports[i]->load_flag & FC_UNLOADING) + continue; + + list_for_each_entry_safe(ndlp, next_ndlp, + &vports[i]->fc_nodes, + nlp_listp) { + if (NLP_CHK_NODE_ACT(ndlp)) + ndlp->nlp_rpi = + lpfc_sli4_alloc_rpi(phba); + } + } + } + lpfc_destroy_vport_work_array(phba, vports); +} + /** * lpfc_online - Initialize and bring a HBA online * @phba: pointer to lpfc hba data structure. @@ -2654,6 +2697,15 @@ lpfc_offline_prep(struct lpfc_hba * phba) } spin_lock_irq(shost->host_lock); ndlp->nlp_flag &= ~NLP_NPR_ADISC; + + /* + * Whenever an SLI4 port goes offline, free the + * RPI. A new RPI when the adapter port comes + * back online. + */ + if (phba->sli_rev == LPFC_SLI_REV4) + lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi); + spin_unlock_irq(shost->host_lock); lpfc_unreg_rpi(vports[i], ndlp); } @@ -7224,19 +7276,17 @@ lpfc_pci_function_reset(struct lpfc_hba *phba) rc = -ENODEV; goto out; } - if (bf_get(lpfc_sliport_status_rdy, ®_data)) - break; - if (bf_get(lpfc_sliport_status_rn, ®_data)) { + if (bf_get(lpfc_sliport_status_rn, ®_data)) reset_again++; + if (bf_get(lpfc_sliport_status_rdy, ®_data)) break; - } } /* * If the port responds to the init request with * reset needed, delay for a bit and restart the loop. */ - if (reset_again) { + if (reset_again && (rdy_chk < 1000)) { msleep(10); reset_again = 0; continue; @@ -9059,7 +9109,7 @@ lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba) int lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw) { - char fwrev[32]; + char fwrev[FW_REV_STR_SIZE]; struct lpfc_grp_hdr *image = (struct lpfc_grp_hdr *)fw->data; struct list_head dma_buffer_list; int i, rc = 0; diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index e8bb0055994..32b6d72cd98 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -48,6 +48,10 @@ static int lpfc_check_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, struct lpfc_name *nn, struct lpfc_name *pn) { + /* First, we MUST have a RPI registered */ + if (!(ndlp->nlp_flag & NLP_RPI_REGISTERED)) + return 0; + /* Compare the ADISC rsp WWNN / WWPN matches our internal node * table entry for that node. */ @@ -385,6 +389,10 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, if (!mbox) goto out; + /* Registering an existing RPI behaves differently for SLI3 vs SLI4 */ + if (phba->sli_rev == LPFC_SLI_REV4) + lpfc_unreg_rpi(vport, ndlp); + rc = lpfc_reg_rpi(phba, vport->vpi, icmd->un.rcvels.remoteID, (uint8_t *) sp, mbox, ndlp->nlp_rpi); if (rc) { @@ -445,11 +453,42 @@ out: return 0; } +/** + * lpfc_mbx_cmpl_resume_rpi - Resume RPI completion routine + * @phba: pointer to lpfc hba data structure. + * @mboxq: pointer to mailbox object + * + * This routine is invoked to issue a completion to a rcv'ed + * ADISC or PDISC after the paused RPI has been resumed. + **/ +static void +lpfc_mbx_cmpl_resume_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) +{ + struct lpfc_vport *vport; + struct lpfc_iocbq *elsiocb; + struct lpfc_nodelist *ndlp; + uint32_t cmd; + + elsiocb = (struct lpfc_iocbq *)mboxq->context1; + ndlp = (struct lpfc_nodelist *) mboxq->context2; + vport = mboxq->vport; + cmd = elsiocb->drvrTimeout; + + if (cmd == ELS_CMD_ADISC) { + lpfc_els_rsp_adisc_acc(vport, elsiocb, ndlp); + } else { + lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, elsiocb, + ndlp, NULL); + } + kfree(elsiocb); +} + static int lpfc_rcv_padisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, struct lpfc_iocbq *cmdiocb) { struct Scsi_Host *shost = lpfc_shost_from_vport(vport); + struct lpfc_iocbq *elsiocb; struct lpfc_dmabuf *pcmd; struct serv_parm *sp; struct lpfc_name *pnn, *ppn; @@ -475,12 +514,43 @@ lpfc_rcv_padisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, icmd = &cmdiocb->iocb; if (icmd->ulpStatus == 0 && lpfc_check_adisc(vport, ndlp, pnn, ppn)) { + + /* + * As soon as we send ACC, the remote NPort can + * start sending us data. Thus, for SLI4 we must + * resume the RPI before the ACC goes out. + */ + if (vport->phba->sli_rev == LPFC_SLI_REV4) { + elsiocb = kmalloc(sizeof(struct lpfc_iocbq), + GFP_KERNEL); + if (elsiocb) { + + /* Save info from cmd IOCB used in rsp */ + memcpy((uint8_t *)elsiocb, (uint8_t *)cmdiocb, + sizeof(struct lpfc_iocbq)); + + /* Save the ELS cmd */ + elsiocb->drvrTimeout = cmd; + + lpfc_sli4_resume_rpi(ndlp, + lpfc_mbx_cmpl_resume_rpi, elsiocb); + goto out; + } + } + if (cmd == ELS_CMD_ADISC) { lpfc_els_rsp_adisc_acc(vport, cmdiocb, ndlp); } else { - lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, - NULL); + lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, + ndlp, NULL); } +out: + /* If we are authenticated, move to the proper state */ + if (ndlp->nlp_type & NLP_FCP_TARGET) + lpfc_nlp_set_state(vport, ndlp, NLP_STE_MAPPED_NODE); + else + lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); + return 1; } /* Reject this request because invalid parameters */ @@ -1229,7 +1299,7 @@ lpfc_cmpl_adisc_adisc_issue(struct lpfc_vport *vport, } if (phba->sli_rev == LPFC_SLI_REV4) { - rc = lpfc_sli4_resume_rpi(ndlp); + rc = lpfc_sli4_resume_rpi(ndlp, NULL, NULL); if (rc) { /* Stay in state and retry. */ ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 42ea367ddba..1a391e2df3b 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -293,7 +293,9 @@ lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm) } bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released); bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT); - bf_set(lpfc_eqcq_doorbell_eqid, &doorbell, q->queue_id); + bf_set(lpfc_eqcq_doorbell_eqid_hi, &doorbell, + (q->queue_id >> LPFC_EQID_HI_FIELD_SHIFT)); + bf_set(lpfc_eqcq_doorbell_eqid_lo, &doorbell, q->queue_id); writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr); /* PCI read to flush PCI pipeline on re-arming for INTx mode */ if ((q->phba->intr_type == INTx) && (arm == LPFC_QUEUE_REARM)) @@ -372,7 +374,9 @@ lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm) bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1); bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released); bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_COMPLETION); - bf_set(lpfc_eqcq_doorbell_cqid, &doorbell, q->queue_id); + bf_set(lpfc_eqcq_doorbell_cqid_hi, &doorbell, + (q->queue_id >> LPFC_CQID_HI_FIELD_SHIFT)); + bf_set(lpfc_eqcq_doorbell_cqid_lo, &doorbell, q->queue_id); writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr); return released; } @@ -5596,6 +5600,8 @@ lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *phba) for (i = 0; i < count; i++) phba->sli4_hba.rpi_ids[i] = base + i; + lpfc_sli4_node_prep(phba); + /* VPIs. */ count = phba->sli4_hba.max_cfg_param.max_vpi; base = phba->sli4_hba.max_cfg_param.vpi_base; @@ -7555,6 +7561,8 @@ lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq, sgl = (struct sli4_sge *)sglq->sgl; icmd = &piocbq->iocb; + if (icmd->ulpCommand == CMD_XMIT_BLS_RSP64_CX) + return sglq->sli4_xritag; if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) { numBdes = icmd->un.genreq64.bdl.bdeSize / sizeof(struct ulp_bde64); @@ -7756,6 +7764,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, if (if_type == LPFC_SLI_INTF_IF_TYPE_2) { if (pcmd && (*pcmd == ELS_CMD_FLOGI || *pcmd == ELS_CMD_SCR || + *pcmd == ELS_CMD_FDISC || *pcmd == ELS_CMD_PLOGI)) { bf_set(els_req64_sp, &wqe->els_req, 1); bf_set(els_req64_sid, &wqe->els_req, @@ -7982,6 +7991,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, xritag = 0; break; case CMD_XMIT_BLS_RSP64_CX: + ndlp = (struct lpfc_nodelist *)iocbq->context1; /* As BLS ABTS RSP WQE is very different from other WQEs, * we re-construct this WQE here based on information in * iocbq from scratch. @@ -8008,8 +8018,15 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, } bf_set(xmit_bls_rsp64_seqcnthi, &wqe->xmit_bls_rsp, 0xffff); bf_set(wqe_xmit_bls_pt, &wqe->xmit_bls_rsp.wqe_dest, 0x1); + + /* Use CT=VPI */ + bf_set(wqe_els_did, &wqe->xmit_bls_rsp.wqe_dest, + ndlp->nlp_DID); + bf_set(xmit_bls_rsp64_temprpi, &wqe->xmit_bls_rsp, + iocbq->iocb.ulpContext); + bf_set(wqe_ct, &wqe->xmit_bls_rsp.wqe_com, 1); bf_set(wqe_ctxt_tag, &wqe->xmit_bls_rsp.wqe_com, - iocbq->iocb.ulpContext); + phba->vpi_ids[phba->pport->vpi]); bf_set(wqe_qosd, &wqe->xmit_bls_rsp.wqe_com, 1); bf_set(wqe_lenloc, &wqe->xmit_bls_rsp.wqe_com, LPFC_WQE_LENLOC_NONE); @@ -8073,8 +8090,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number, if (piocb->sli4_xritag == NO_XRI) { if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN || - piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN || - piocb->iocb.ulpCommand == CMD_XMIT_BLS_RSP64_CX) + piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN) sglq = NULL; else { if (pring->txq_cnt) { @@ -8384,10 +8400,13 @@ lpfc_sli4_abts_err_handler(struct lpfc_hba *phba, { struct lpfc_vport *vport; - if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) + if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { lpfc_printf_log(phba, KERN_INFO, LOG_SLI, "3115 Node Context not found, driver " "ignoring abts err event\n"); + return; + } + vport = ndlp->vport; lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, "3116 Port generated FCP XRI ABORT event on " @@ -14042,6 +14061,13 @@ lpfc_sli4_seq_abort_rsp_cmpl(struct lpfc_hba *phba, { if (cmd_iocbq) lpfc_sli_release_iocbq(phba, cmd_iocbq); + + /* Failure means BLS ABORT RSP did not get delivered to remote node*/ + if (rsp_iocbq && rsp_iocbq->iocb.ulpStatus) + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "3154 BLS ABORT RSP failed, data: x%x/x%x\n", + rsp_iocbq->iocb.ulpStatus, + rsp_iocbq->iocb.un.ulpWord[4]); } /** @@ -14748,7 +14774,8 @@ lpfc_sli4_remove_rpis(struct lpfc_hba *phba) * provided rpi via a bitmask. **/ int -lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp) +lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp, + void (*cmpl)(struct lpfc_hba *, LPFC_MBOXQ_t *), void *arg) { LPFC_MBOXQ_t *mboxq; struct lpfc_hba *phba = ndlp->phba; @@ -14761,6 +14788,12 @@ lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp) /* Post all rpi memory regions to the port. */ lpfc_resume_rpi(mboxq, ndlp); + if (cmpl) { + mboxq->mbox_cmpl = cmpl; + mboxq->context1 = arg; + mboxq->context2 = ndlp; + } + mboxq->vport = ndlp->vport; rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT); if (rc == MBX_NOT_FINISHED) { lpfc_printf_log(phba, KERN_ERR, LOG_SLI, diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index 3f266e2c54e..c19d139618b 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -633,7 +633,8 @@ void lpfc_sli4_free_rpi(struct lpfc_hba *, int); void lpfc_sli4_remove_rpis(struct lpfc_hba *); void lpfc_sli4_async_event_proc(struct lpfc_hba *); void lpfc_sli4_fcf_redisc_event_proc(struct lpfc_hba *); -int lpfc_sli4_resume_rpi(struct lpfc_nodelist *); +int lpfc_sli4_resume_rpi(struct lpfc_nodelist *, + void (*)(struct lpfc_hba *, LPFC_MBOXQ_t *), void *); void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *); void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *); void lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *, -- cgit v1.2.3-70-g09d2 From acd6859b084d1e1b3ec8bc9befe6532223260d33 Mon Sep 17 00:00:00 2001 From: James Smart Date: Wed, 18 Jan 2012 16:25:09 -0500 Subject: [SCSI] lpfc 8.3.29: T10 Diff fixes and enhancements T10 Diff fixes and enhancements: - Add SLI4 Lancer support for T10 DIF / BlockGuard (121980) - Fix SLI4 BlockGuard behavior when protection data is generated by HBA (121980) - Enhance debugfs for injecting T10 DIF errors (123966, 132966) - Fix Incorrect usage of bghm for BlockGuard errors (127022) Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 13 +- drivers/scsi/lpfc/lpfc_debugfs.c | 19 + drivers/scsi/lpfc/lpfc_hw4.h | 23 +- drivers/scsi/lpfc/lpfc_init.c | 10 +- drivers/scsi/lpfc/lpfc_scsi.c | 1178 ++++++++++++++++++++++++++++++++------ drivers/scsi/lpfc/lpfc_sli.c | 54 +- drivers/scsi/lpfc/lpfc_sli.h | 1 + 7 files changed, 1111 insertions(+), 187 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 825f9307417..5fc044ff656 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -534,6 +534,7 @@ struct lpfc_hba { void (*lpfc_scsi_prep_cmnd) (struct lpfc_vport *, struct lpfc_scsi_buf *, struct lpfc_nodelist *); + /* IOCB interface function jump table entries */ int (*__lpfc_sli_issue_iocb) (struct lpfc_hba *, uint32_t, @@ -541,8 +542,6 @@ struct lpfc_hba { void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *, struct lpfc_iocbq *); int (*lpfc_hba_down_post)(struct lpfc_hba *phba); - - IOCB_t * (*lpfc_get_iocb_from_iocbq) (struct lpfc_iocbq *); void (*lpfc_scsi_cmd_iocb_cmpl) @@ -551,10 +550,12 @@ struct lpfc_hba { /* MBOX interface function jump table entries */ int (*lpfc_sli_issue_mbox) (struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t); + /* Slow-path IOCB process function jump table entries */ void (*lpfc_sli_handle_slow_ring_event) (struct lpfc_hba *phba, struct lpfc_sli_ring *pring, uint32_t mask); + /* INIT device interface function jump table entries */ int (*lpfc_sli_hbq_to_firmware) (struct lpfc_hba *, uint32_t, struct hbq_dmabuf *); @@ -573,6 +574,10 @@ struct lpfc_hba { int (*lpfc_selective_reset) (struct lpfc_hba *); + int (*lpfc_bg_scsi_prep_dma_buf) + (struct lpfc_hba *, struct lpfc_scsi_buf *); + /* Add new entries here */ + /* SLI4 specific HBA data structure */ struct lpfc_sli4_hba sli4_hba; @@ -838,6 +843,7 @@ struct lpfc_hba { struct dentry *debug_writeGuard; /* inject write guard_tag errors */ struct dentry *debug_writeApp; /* inject write app_tag errors */ struct dentry *debug_writeRef; /* inject write ref_tag errors */ + struct dentry *debug_readGuard; /* inject read guard_tag errors */ struct dentry *debug_readApp; /* inject read app_tag errors */ struct dentry *debug_readRef; /* inject read ref_tag errors */ @@ -845,10 +851,11 @@ struct lpfc_hba { uint32_t lpfc_injerr_wgrd_cnt; uint32_t lpfc_injerr_wapp_cnt; uint32_t lpfc_injerr_wref_cnt; + uint32_t lpfc_injerr_rgrd_cnt; uint32_t lpfc_injerr_rapp_cnt; uint32_t lpfc_injerr_rref_cnt; sector_t lpfc_injerr_lba; -#define LPFC_INJERR_LBA_OFF (sector_t)0xffffffffffffffff +#define LPFC_INJERR_LBA_OFF (sector_t)(-1) struct dentry *debug_slow_ring_trc; struct lpfc_debugfs_trc *slow_ring_trc; diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 3587a3fe8fc..22e17be04d8 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -1019,6 +1019,8 @@ lpfc_debugfs_dif_err_read(struct file *file, char __user *buf, cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wapp_cnt); else if (dent == phba->debug_writeRef) cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_wref_cnt); + else if (dent == phba->debug_readGuard) + cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rgrd_cnt); else if (dent == phba->debug_readApp) cnt = snprintf(cbuf, 16, "%u\n", phba->lpfc_injerr_rapp_cnt); else if (dent == phba->debug_readRef) @@ -1057,6 +1059,8 @@ lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf, phba->lpfc_injerr_wapp_cnt = (uint32_t)tmp; else if (dent == phba->debug_writeRef) phba->lpfc_injerr_wref_cnt = (uint32_t)tmp; + else if (dent == phba->debug_readGuard) + phba->lpfc_injerr_rgrd_cnt = (uint32_t)tmp; else if (dent == phba->debug_readApp) phba->lpfc_injerr_rapp_cnt = (uint32_t)tmp; else if (dent == phba->debug_readRef) @@ -3978,6 +3982,17 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) goto debug_failed; } + snprintf(name, sizeof(name), "readGuardInjErr"); + phba->debug_readGuard = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dif_err); + if (!phba->debug_readGuard) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0808 Cannot create debugfs readGuard\n"); + goto debug_failed; + } + snprintf(name, sizeof(name), "readAppInjErr"); phba->debug_readApp = debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, @@ -4318,6 +4333,10 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport) debugfs_remove(phba->debug_writeRef); /* writeRef */ phba->debug_writeRef = NULL; } + if (phba->debug_readGuard) { + debugfs_remove(phba->debug_readGuard); /* readGuard */ + phba->debug_readGuard = NULL; + } if (phba->debug_readApp) { debugfs_remove(phba->debug_readApp); /* readApp */ phba->debug_readApp = NULL; diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index cc19bc1b5ac..9e2b9b227e1 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -321,6 +321,10 @@ struct lpfc_cqe { #define CQE_STATUS_CMD_REJECT 0xb #define CQE_STATUS_FCP_TGT_LENCHECK 0xc #define CQE_STATUS_NEED_BUFF_ENTRY 0xf +#define CQE_STATUS_DI_ERROR 0x16 + +/* Used when mapping CQE status to IOCB */ +#define LPFC_IOCB_STATUS_MASK 0xf /* Status returned by hardware (valid only if status = CQE_STATUS_SUCCESS). */ #define CQE_HW_STATUS_NO_ERR 0x0 @@ -348,6 +352,21 @@ struct lpfc_wcqe_complete { #define lpfc_wcqe_c_hw_status_WORD word0 uint32_t total_data_placed; uint32_t parameter; +#define lpfc_wcqe_c_bg_edir_SHIFT 5 +#define lpfc_wcqe_c_bg_edir_MASK 0x00000001 +#define lpfc_wcqe_c_bg_edir_WORD parameter +#define lpfc_wcqe_c_bg_tdpv_SHIFT 3 +#define lpfc_wcqe_c_bg_tdpv_MASK 0x00000001 +#define lpfc_wcqe_c_bg_tdpv_WORD parameter +#define lpfc_wcqe_c_bg_re_SHIFT 2 +#define lpfc_wcqe_c_bg_re_MASK 0x00000001 +#define lpfc_wcqe_c_bg_re_WORD parameter +#define lpfc_wcqe_c_bg_ae_SHIFT 1 +#define lpfc_wcqe_c_bg_ae_MASK 0x00000001 +#define lpfc_wcqe_c_bg_ae_WORD parameter +#define lpfc_wcqe_c_bg_ge_SHIFT 0 +#define lpfc_wcqe_c_bg_ge_MASK 0x00000001 +#define lpfc_wcqe_c_bg_ge_WORD parameter uint32_t word3; #define lpfc_wcqe_c_valid_SHIFT lpfc_cqe_valid_SHIFT #define lpfc_wcqe_c_valid_MASK lpfc_cqe_valid_MASK @@ -359,8 +378,8 @@ struct lpfc_wcqe_complete { #define lpfc_wcqe_c_pv_MASK 0x00000001 #define lpfc_wcqe_c_pv_WORD word3 #define lpfc_wcqe_c_priority_SHIFT 24 -#define lpfc_wcqe_c_priority_MASK 0x00000007 -#define lpfc_wcqe_c_priority_WORD word3 +#define lpfc_wcqe_c_priority_MASK 0x00000007 +#define lpfc_wcqe_c_priority_WORD word3 #define lpfc_wcqe_c_code_SHIFT lpfc_cqe_code_SHIFT #define lpfc_wcqe_c_code_MASK lpfc_cqe_code_MASK #define lpfc_wcqe_c_code_WORD lpfc_cqe_code_WORD diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index f3ad7349f5d..d9628770f11 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -4380,6 +4380,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0}; struct lpfc_mqe *mqe; int longs, sli_family; + int sges_per_segment; /* Before proceed, wait for POST done and device ready */ rc = lpfc_sli4_post_status_check(phba); @@ -4443,6 +4444,11 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) phba->fc_map[1] = LPFC_FCOE_FCF_MAP1; phba->fc_map[2] = LPFC_FCOE_FCF_MAP2; + /* With BlockGuard we can have multiple SGEs per Data Segemnt */ + sges_per_segment = 1; + if (phba->cfg_enable_bg) + sges_per_segment = 2; + /* * Since the sg_tablesize is module parameter, the sg_dma_buf_size * used to create the sg_dma_buf_pool must be dynamically calculated. @@ -4451,7 +4457,8 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) * sgl sizes of must be a power of 2. */ buf_size = (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp) + - ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge))); + (((phba->cfg_sg_seg_cnt * sges_per_segment) + 2) * + sizeof(struct sli4_sge))); sli_family = bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf); max_buf_size = LPFC_SLI4_MAX_BUF_SIZE; @@ -4468,6 +4475,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) default: break; } + for (dma_buf_size = LPFC_SLI4_MIN_BUF_SIZE; dma_buf_size < max_buf_size && buf_size > dma_buf_size; dma_buf_size = dma_buf_size << 1) diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index c60f5d0b386..efc055b6bac 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2004-2011 Emulex. All rights reserved. * + * Copyright (C) 2004-2012 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * Portions Copyright (C) 2004-2005 Christoph Hellwig * @@ -1280,31 +1280,45 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc) } #ifdef CONFIG_SCSI_LPFC_DEBUG_FS -/* - * Given a scsi cmnd, determine the BlockGuard tags to be used with it + +#define BG_ERR_INIT 1 +#define BG_ERR_TGT 2 +#define BG_ERR_SWAP 3 +#define BG_ERR_CHECK 4 + +/** + * lpfc_bg_err_inject - Determine if we should inject an error + * @phba: The Hba for which this call is being executed. * @sc: The SCSI command to examine * @reftag: (out) BlockGuard reference tag for transmitted data * @apptag: (out) BlockGuard application tag for transmitted data * @new_guard (in) Value to replace CRC with if needed * - * Returns (1) if error injection was performed, (0) otherwise - */ + * Returns (1) if error injection is detected by Initiator + * Returns (2) if error injection is detected by Target + * Returns (3) if swapping CSUM->CRC is required for error injection + * Returns (4) disabling Guard/Ref/App checking is required for error injection + **/ static int lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, uint32_t *reftag, uint16_t *apptag, uint32_t new_guard) { struct scatterlist *sgpe; /* s/g prot entry */ struct scatterlist *sgde; /* s/g data entry */ - struct scsi_dif_tuple *src; + struct scsi_dif_tuple *src = NULL; uint32_t op = scsi_get_prot_op(sc); uint32_t blksize; uint32_t numblks; sector_t lba; int rc = 0; + int blockoff = 0; if (op == SCSI_PROT_NORMAL) return 0; + sgpe = scsi_prot_sglist(sc); + sgde = scsi_sglist(sc); + lba = scsi_get_lba(sc); if (phba->lpfc_injerr_lba != LPFC_INJERR_LBA_OFF) { blksize = lpfc_cmd_blksize(sc); @@ -1314,142 +1328,296 @@ lpfc_bg_err_inject(struct lpfc_hba *phba, struct scsi_cmnd *sc, if ((phba->lpfc_injerr_lba < lba) || (phba->lpfc_injerr_lba >= (lba + numblks))) return 0; + if (sgpe) { + blockoff = phba->lpfc_injerr_lba - lba; + numblks = sg_dma_len(sgpe) / + sizeof(struct scsi_dif_tuple); + if (numblks < blockoff) + blockoff = numblks; + src = (struct scsi_dif_tuple *)sg_virt(sgpe); + src += blockoff; + } } - sgpe = scsi_prot_sglist(sc); - sgde = scsi_sglist(sc); - /* Should we change the Reference Tag */ if (reftag) { - /* - * If we are SCSI_PROT_WRITE_STRIP, the protection data is - * being stripped from the wire, thus it doesn't matter. - */ - if ((op == SCSI_PROT_WRITE_PASS) || - (op == SCSI_PROT_WRITE_INSERT)) { - if (phba->lpfc_injerr_wref_cnt) { + if (phba->lpfc_injerr_wref_cnt) { + switch (op) { + case SCSI_PROT_WRITE_PASS: + if (blockoff && src) { + /* Insert error in middle of the IO */ + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "9076 BLKGRD: Injecting reftag error: " + "write lba x%lx + x%x oldrefTag x%x\n", + (unsigned long)lba, blockoff, + src->ref_tag); + /* + * NOTE, this will change ref tag in + * the memory location forever! + */ + src->ref_tag = 0xDEADBEEF; + phba->lpfc_injerr_wref_cnt--; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + rc = BG_ERR_CHECK; + break; + } + /* Drop thru */ + case SCSI_PROT_WRITE_STRIP: + /* + * For WRITE_STRIP and WRITE_PASS, + * force the error on data + * being copied from SLI-Host to SLI-Port. + */ + *reftag = 0xDEADBEEF; + phba->lpfc_injerr_wref_cnt--; + phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + rc = BG_ERR_INIT; + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "9077 BLKGRD: Injecting reftag error: " + "write lba x%lx\n", (unsigned long)lba); + break; + case SCSI_PROT_WRITE_INSERT: + /* + * For WRITE_INSERT, force the + * error to be sent on the wire. It should be + * detected by the Target. + */ /* DEADBEEF will be the reftag on the wire */ *reftag = 0xDEADBEEF; phba->lpfc_injerr_wref_cnt--; phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - rc = 1; + rc = BG_ERR_TGT; lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9081 BLKGRD: Injecting reftag error: " + "9078 BLKGRD: Injecting reftag error: " "write lba x%lx\n", (unsigned long)lba); + break; } - } else { - if (phba->lpfc_injerr_rref_cnt) { + } + if (phba->lpfc_injerr_rref_cnt) { + switch (op) { + case SCSI_PROT_READ_INSERT: + /* + * For READ_INSERT, it doesn't make sense + * to change the reftag. + */ + break; + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_READ_PASS: + /* + * For READ_STRIP and READ_PASS, force the + * error on data being read off the wire. It + * should force an IO error to the driver. + */ *reftag = 0xDEADBEEF; phba->lpfc_injerr_rref_cnt--; phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - rc = 1; + rc = BG_ERR_INIT; lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9076 BLKGRD: Injecting reftag error: " + "9079 BLKGRD: Injecting reftag error: " "read lba x%lx\n", (unsigned long)lba); + break; } } } /* Should we change the Application Tag */ if (apptag) { - /* - * If we are SCSI_PROT_WRITE_STRIP, the protection data is - * being stripped from the wire, thus it doesn't matter. - */ - if ((op == SCSI_PROT_WRITE_PASS) || - (op == SCSI_PROT_WRITE_INSERT)) { - if (phba->lpfc_injerr_wapp_cnt) { + if (phba->lpfc_injerr_wapp_cnt) { + switch (op) { + case SCSI_PROT_WRITE_PASS: + if (blockoff && src) { + /* Insert error in middle of the IO */ + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "9080 BLKGRD: Injecting apptag error: " + "write lba x%lx + x%x oldappTag x%x\n", + (unsigned long)lba, blockoff, + src->app_tag); + + /* + * NOTE, this will change app tag in + * the memory location forever! + */ + src->app_tag = 0xDEAD; + phba->lpfc_injerr_wapp_cnt--; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + rc = BG_ERR_CHECK; + break; + } + /* Drop thru */ + case SCSI_PROT_WRITE_STRIP: + /* + * For WRITE_STRIP and WRITE_PASS, + * force the error on data + * being copied from SLI-Host to SLI-Port. + */ + *apptag = 0xDEAD; + phba->lpfc_injerr_wapp_cnt--; + phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + rc = BG_ERR_INIT; + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "0812 BLKGRD: Injecting apptag error: " + "write lba x%lx\n", (unsigned long)lba); + break; + case SCSI_PROT_WRITE_INSERT: + /* + * For WRITE_INSERT, force the + * error to be sent on the wire. It should be + * detected by the Target. + */ /* DEAD will be the apptag on the wire */ *apptag = 0xDEAD; phba->lpfc_injerr_wapp_cnt--; phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - rc = 1; + rc = BG_ERR_TGT; lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9077 BLKGRD: Injecting apptag error: " + "0813 BLKGRD: Injecting apptag error: " "write lba x%lx\n", (unsigned long)lba); + break; } - } else { - if (phba->lpfc_injerr_rapp_cnt) { + } + if (phba->lpfc_injerr_rapp_cnt) { + switch (op) { + case SCSI_PROT_READ_INSERT: + /* + * For READ_INSERT, it doesn't make sense + * to change the apptag. + */ + break; + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_READ_PASS: + /* + * For READ_STRIP and READ_PASS, force the + * error on data being read off the wire. It + * should force an IO error to the driver. + */ *apptag = 0xDEAD; phba->lpfc_injerr_rapp_cnt--; phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - rc = 1; + rc = BG_ERR_INIT; lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9078 BLKGRD: Injecting apptag error: " + "0814 BLKGRD: Injecting apptag error: " "read lba x%lx\n", (unsigned long)lba); + break; } } } + /* Should we change the Guard Tag */ + if (new_guard) { + if (phba->lpfc_injerr_wgrd_cnt) { + switch (op) { + case SCSI_PROT_WRITE_PASS: + if (blockoff && src) { + /* Insert error in middle of the IO */ + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "0815 BLKGRD: Injecting guard error: " + "write lba x%lx + x%x oldgrdTag x%x\n", + (unsigned long)lba, blockoff, + src->guard_tag); - /* - * If we are SCSI_PROT_WRITE_INSERT, the protection data is - * being on the wire is being fully generated on the HBA. - * The host cannot change it or force an error. - */ - if (((op == SCSI_PROT_WRITE_STRIP) || - (op == SCSI_PROT_WRITE_PASS)) && - phba->lpfc_injerr_wgrd_cnt) { - if (sgpe) { - src = (struct scsi_dif_tuple *)sg_virt(sgpe); - /* - * Just inject an error in the first - * prot block. - */ - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9079 BLKGRD: Injecting guard error: " - "write lba x%lx oldGuard x%x refTag x%x\n", - (unsigned long)lba, src->guard_tag, - src->ref_tag); + /* + * NOTE, this will change guard tag in + * the memory location forever! + */ + src->guard_tag = 0xDEAD; + phba->lpfc_injerr_wgrd_cnt--; + phba->lpfc_injerr_lba = + LPFC_INJERR_LBA_OFF; + rc = BG_ERR_CHECK; + break; + } + /* Drop thru */ + case SCSI_PROT_WRITE_STRIP: + /* + * For WRITE_STRIP and WRITE_PASS, + * force the error on data + * being copied from SLI-Host to SLI-Port. + */ + phba->lpfc_injerr_wgrd_cnt--; + phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - src->guard_tag = (uint16_t)new_guard; - phba->lpfc_injerr_wgrd_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - rc = 1; + rc = BG_ERR_SWAP; + /* Signals the caller to swap CRC->CSUM */ - } else { - blksize = lpfc_cmd_blksize(sc); - /* - * Jump past the first data block - * and inject an error in the - * prot data. The prot data is already - * embedded after the regular data. - */ - src = (struct scsi_dif_tuple *) - (sg_virt(sgde) + blksize); + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "0816 BLKGRD: Injecting guard error: " + "write lba x%lx\n", (unsigned long)lba); + break; + case SCSI_PROT_WRITE_INSERT: + /* + * For WRITE_INSERT, force the + * error to be sent on the wire. It should be + * detected by the Target. + */ + phba->lpfc_injerr_wgrd_cnt--; + phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9080 BLKGRD: Injecting guard error: " - "write lba x%lx oldGuard x%x refTag x%x\n", - (unsigned long)lba, src->guard_tag, - src->ref_tag); - - src->guard_tag = (uint16_t)new_guard; - phba->lpfc_injerr_wgrd_cnt--; - phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; - rc = 1; + rc = BG_ERR_SWAP; + /* Signals the caller to swap CRC->CSUM */ + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "0817 BLKGRD: Injecting guard error: " + "write lba x%lx\n", (unsigned long)lba); + break; + } + } + if (phba->lpfc_injerr_rgrd_cnt) { + switch (op) { + case SCSI_PROT_READ_INSERT: + /* + * For READ_INSERT, it doesn't make sense + * to change the guard tag. + */ + break; + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_READ_PASS: + /* + * For READ_STRIP and READ_PASS, force the + * error on data being read off the wire. It + * should force an IO error to the driver. + */ + *apptag = 0xDEAD; + phba->lpfc_injerr_rgrd_cnt--; + phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF; + + rc = BG_ERR_SWAP; + /* Signals the caller to swap CRC->CSUM */ + + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "0818 BLKGRD: Injecting guard error: " + "read lba x%lx\n", (unsigned long)lba); + } } } + return rc; } #endif -/* - * Given a scsi cmnd, determine the BlockGuard opcodes to be used with it +/** + * lpfc_sc_to_bg_opcodes - Determine the BlockGuard opcodes to be used with + * the specified SCSI command. + * @phba: The Hba for which this call is being executed. * @sc: The SCSI command to examine * @txopt: (out) BlockGuard operation for transmitted data * @rxopt: (out) BlockGuard operation for received data * * Returns: zero on success; non-zero if tx and/or rx op cannot be determined * - */ + **/ static int lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, uint8_t *txop, uint8_t *rxop) @@ -1519,8 +1687,88 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, return ret; } -/* - * This function sets up buffer list for protection groups of +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS +/** + * lpfc_bg_err_opcodes - reDetermine the BlockGuard opcodes to be used with + * the specified SCSI command in order to force a guard tag error. + * @phba: The Hba for which this call is being executed. + * @sc: The SCSI command to examine + * @txopt: (out) BlockGuard operation for transmitted data + * @rxopt: (out) BlockGuard operation for received data + * + * Returns: zero on success; non-zero if tx and/or rx op cannot be determined + * + **/ +static int +lpfc_bg_err_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, + uint8_t *txop, uint8_t *rxop) +{ + uint8_t guard_type = scsi_host_get_guard(sc->device->host); + uint8_t ret = 0; + + if (guard_type == SHOST_DIX_GUARD_IP) { + switch (scsi_get_prot_op(sc)) { + case SCSI_PROT_READ_INSERT: + case SCSI_PROT_WRITE_STRIP: + *txop = BG_OP_IN_CRC_OUT_NODIF; + *rxop = BG_OP_IN_NODIF_OUT_CRC; + break; + + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_WRITE_INSERT: + *txop = BG_OP_IN_NODIF_OUT_CSUM; + *rxop = BG_OP_IN_CSUM_OUT_NODIF; + break; + + case SCSI_PROT_READ_PASS: + case SCSI_PROT_WRITE_PASS: + *txop = BG_OP_IN_CRC_OUT_CRC; + *rxop = BG_OP_IN_CRC_OUT_CRC; + break; + + case SCSI_PROT_NORMAL: + default: + break; + + } + } else { + switch (scsi_get_prot_op(sc)) { + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_WRITE_INSERT: + *txop = BG_OP_IN_NODIF_OUT_CSUM; + *rxop = BG_OP_IN_CSUM_OUT_NODIF; + break; + + case SCSI_PROT_READ_PASS: + case SCSI_PROT_WRITE_PASS: + *txop = BG_OP_IN_CSUM_OUT_CRC; + *rxop = BG_OP_IN_CRC_OUT_CSUM; + break; + + case SCSI_PROT_READ_INSERT: + case SCSI_PROT_WRITE_STRIP: + *txop = BG_OP_IN_CSUM_OUT_NODIF; + *rxop = BG_OP_IN_NODIF_OUT_CSUM; + break; + + case SCSI_PROT_NORMAL: + default: + break; + } + } + + return ret; +} +#endif + +/** + * lpfc_bg_setup_bpl - Setup BlockGuard BPL with no protection data + * @phba: The Hba for which this call is being executed. + * @sc: pointer to scsi command we're working on + * @bpl: pointer to buffer list for protection groups + * @datacnt: number of segments of data that have been dma mapped + * + * This function sets up BPL buffer list for protection groups of * type LPFC_PG_TYPE_NO_DIF * * This is usually used when the HBA is instructed to generate @@ -1539,12 +1787,11 @@ lpfc_sc_to_bg_opcodes(struct lpfc_hba *phba, struct scsi_cmnd *sc, * |more Data BDE's ... (opt)| * +-------------------------+ * - * @sc: pointer to scsi command we're working on - * @bpl: pointer to buffer list for protection groups - * @datacnt: number of segments of data that have been dma mapped * * Note: Data s/g buffers have been dma mapped - */ + * + * Returns the number of BDEs added to the BPL. + **/ static int lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc, struct ulp_bde64 *bpl, int datasegcnt) @@ -1555,6 +1802,8 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc, dma_addr_t physaddr; int i = 0, num_bde = 0, status; int datadir = sc->sc_data_direction; + uint32_t rc; + uint32_t checking = 1; uint32_t reftag; unsigned blksize; uint8_t txop, rxop; @@ -1565,11 +1814,16 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc, /* extract some info from the scsi command for pde*/ blksize = lpfc_cmd_blksize(sc); - reftag = scsi_get_lba(sc) & 0xffffffff; + reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ #ifdef CONFIG_SCSI_LPFC_DEBUG_FS - /* reftag is the only error we can inject here */ - lpfc_bg_err_inject(phba, sc, &reftag, 0, 0); + rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1); + if (rc) { + if (rc == BG_ERR_SWAP) + lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); + if (rc == BG_ERR_CHECK) + checking = 0; + } #endif /* setup PDE5 with what we have */ @@ -1592,8 +1846,8 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc, bf_set(pde6_optx, pde6, txop); bf_set(pde6_oprx, pde6, rxop); if (datadir == DMA_FROM_DEVICE) { - bf_set(pde6_ce, pde6, 1); - bf_set(pde6_re, pde6, 1); + bf_set(pde6_ce, pde6, checking); + bf_set(pde6_re, pde6, checking); } bf_set(pde6_ai, pde6, 1); bf_set(pde6_ae, pde6, 0); @@ -1627,9 +1881,16 @@ out: return num_bde; } -/* - * This function sets up buffer list for protection groups of - * type LPFC_PG_TYPE_DIF_BUF +/** + * lpfc_bg_setup_bpl_prot - Setup BlockGuard BPL with protection data + * @phba: The Hba for which this call is being executed. + * @sc: pointer to scsi command we're working on + * @bpl: pointer to buffer list for protection groups + * @datacnt: number of segments of data that have been dma mapped + * @protcnt: number of segment of protection data that have been dma mapped + * + * This function sets up BPL buffer list for protection groups of + * type LPFC_PG_TYPE_DIF * * This is usually used when DIFs are in their own buffers, * separate from the data. The HBA can then by instructed @@ -1654,14 +1915,11 @@ out: * | ... | * +-------------------------+ * - * @sc: pointer to scsi command we're working on - * @bpl: pointer to buffer list for protection groups - * @datacnt: number of segments of data that have been dma mapped - * @protcnt: number of segment of protection data that have been dma mapped - * * Note: It is assumed that both data and protection s/g buffers have been * mapped for DMA - */ + * + * Returns the number of BDEs added to the BPL. + **/ static int lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, struct ulp_bde64 *bpl, int datacnt, int protcnt) @@ -1681,6 +1939,8 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, int datadir = sc->sc_data_direction; unsigned char pgdone = 0, alldone = 0; unsigned blksize; + uint32_t rc; + uint32_t checking = 1; uint32_t reftag; uint8_t txop, rxop; int num_bde = 0; @@ -1690,7 +1950,355 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, if (!sgpe || !sgde) { lpfc_printf_log(phba, KERN_ERR, LOG_FCP, - "9020 Invalid s/g entry: data=0x%p prot=0x%p\n", + "9020 Invalid s/g entry: data=0x%p prot=0x%p\n", + sgpe, sgde); + return 0; + } + + status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop); + if (status) + goto out; + + /* extract some info from the scsi command */ + blksize = lpfc_cmd_blksize(sc); + reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ + +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1); + if (rc) { + if (rc == BG_ERR_SWAP) + lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); + if (rc == BG_ERR_CHECK) + checking = 0; + } +#endif + + split_offset = 0; + do { + /* setup PDE5 with what we have */ + pde5 = (struct lpfc_pde5 *) bpl; + memset(pde5, 0, sizeof(struct lpfc_pde5)); + bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR); + + /* Endianness conversion if necessary for PDE5 */ + pde5->word0 = cpu_to_le32(pde5->word0); + pde5->reftag = cpu_to_le32(reftag); + + /* advance bpl and increment bde count */ + num_bde++; + bpl++; + pde6 = (struct lpfc_pde6 *) bpl; + + /* setup PDE6 with the rest of the info */ + memset(pde6, 0, sizeof(struct lpfc_pde6)); + bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR); + bf_set(pde6_optx, pde6, txop); + bf_set(pde6_oprx, pde6, rxop); + bf_set(pde6_ce, pde6, checking); + bf_set(pde6_re, pde6, checking); + bf_set(pde6_ai, pde6, 1); + bf_set(pde6_ae, pde6, 0); + bf_set(pde6_apptagval, pde6, 0); + + /* Endianness conversion if necessary for PDE6 */ + pde6->word0 = cpu_to_le32(pde6->word0); + pde6->word1 = cpu_to_le32(pde6->word1); + pde6->word2 = cpu_to_le32(pde6->word2); + + /* advance bpl and increment bde count */ + num_bde++; + bpl++; + + /* setup the first BDE that points to protection buffer */ + protphysaddr = sg_dma_address(sgpe) + protgroup_offset; + protgroup_len = sg_dma_len(sgpe) - protgroup_offset; + + /* must be integer multiple of the DIF block length */ + BUG_ON(protgroup_len % 8); + + pde7 = (struct lpfc_pde7 *) bpl; + memset(pde7, 0, sizeof(struct lpfc_pde7)); + bf_set(pde7_type, pde7, LPFC_PDE7_DESCRIPTOR); + + pde7->addrHigh = le32_to_cpu(putPaddrHigh(protphysaddr)); + pde7->addrLow = le32_to_cpu(putPaddrLow(protphysaddr)); + + protgrp_blks = protgroup_len / 8; + protgrp_bytes = protgrp_blks * blksize; + + /* check if this pde is crossing the 4K boundary; if so split */ + if ((pde7->addrLow & 0xfff) + protgroup_len > 0x1000) { + protgroup_remainder = 0x1000 - (pde7->addrLow & 0xfff); + protgroup_offset += protgroup_remainder; + protgrp_blks = protgroup_remainder / 8; + protgrp_bytes = protgrp_blks * blksize; + } else { + protgroup_offset = 0; + curr_prot++; + } + + num_bde++; + + /* setup BDE's for data blocks associated with DIF data */ + pgdone = 0; + subtotal = 0; /* total bytes processed for current prot grp */ + while (!pgdone) { + if (!sgde) { + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "9065 BLKGRD:%s Invalid data segment\n", + __func__); + return 0; + } + bpl++; + dataphysaddr = sg_dma_address(sgde) + split_offset; + bpl->addrLow = le32_to_cpu(putPaddrLow(dataphysaddr)); + bpl->addrHigh = le32_to_cpu(putPaddrHigh(dataphysaddr)); + + remainder = sg_dma_len(sgde) - split_offset; + + if ((subtotal + remainder) <= protgrp_bytes) { + /* we can use this whole buffer */ + bpl->tus.f.bdeSize = remainder; + split_offset = 0; + + if ((subtotal + remainder) == protgrp_bytes) + pgdone = 1; + } else { + /* must split this buffer with next prot grp */ + bpl->tus.f.bdeSize = protgrp_bytes - subtotal; + split_offset += bpl->tus.f.bdeSize; + } + + subtotal += bpl->tus.f.bdeSize; + + if (datadir == DMA_TO_DEVICE) + bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64; + else + bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I; + bpl->tus.w = le32_to_cpu(bpl->tus.w); + + num_bde++; + curr_data++; + + if (split_offset) + break; + + /* Move to the next s/g segment if possible */ + sgde = sg_next(sgde); + + } + + if (protgroup_offset) { + /* update the reference tag */ + reftag += protgrp_blks; + bpl++; + continue; + } + + /* are we done ? */ + if (curr_prot == protcnt) { + alldone = 1; + } else if (curr_prot < protcnt) { + /* advance to next prot buffer */ + sgpe = sg_next(sgpe); + bpl++; + + /* update the reference tag */ + reftag += protgrp_blks; + } else { + /* if we're here, we have a bug */ + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "9054 BLKGRD: bug in %s\n", __func__); + } + + } while (!alldone); +out: + + return num_bde; +} + +/** + * lpfc_bg_setup_sgl - Setup BlockGuard SGL with no protection data + * @phba: The Hba for which this call is being executed. + * @sc: pointer to scsi command we're working on + * @sgl: pointer to buffer list for protection groups + * @datacnt: number of segments of data that have been dma mapped + * + * This function sets up SGL buffer list for protection groups of + * type LPFC_PG_TYPE_NO_DIF + * + * This is usually used when the HBA is instructed to generate + * DIFs and insert them into data stream (or strip DIF from + * incoming data stream) + * + * The buffer list consists of just one protection group described + * below: + * +-------------------------+ + * start of prot group --> | DI_SEED | + * +-------------------------+ + * | Data SGE | + * +-------------------------+ + * |more Data SGE's ... (opt)| + * +-------------------------+ + * + * + * Note: Data s/g buffers have been dma mapped + * + * Returns the number of SGEs added to the SGL. + **/ +static int +lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc, + struct sli4_sge *sgl, int datasegcnt) +{ + struct scatterlist *sgde = NULL; /* s/g data entry */ + struct sli4_sge_diseed *diseed = NULL; + dma_addr_t physaddr; + int i = 0, num_sge = 0, status; + int datadir = sc->sc_data_direction; + uint32_t reftag; + unsigned blksize; + uint8_t txop, rxop; + uint32_t rc; + uint32_t checking = 1; + uint32_t dma_len; + uint32_t dma_offset = 0; + + status = lpfc_sc_to_bg_opcodes(phba, sc, &txop, &rxop); + if (status) + goto out; + + /* extract some info from the scsi command for pde*/ + blksize = lpfc_cmd_blksize(sc); + reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ + +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1); + if (rc) { + if (rc == BG_ERR_SWAP) + lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); + if (rc == BG_ERR_CHECK) + checking = 0; + } +#endif + + /* setup DISEED with what we have */ + diseed = (struct sli4_sge_diseed *) sgl; + memset(diseed, 0, sizeof(struct sli4_sge_diseed)); + bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED); + + /* Endianness conversion if necessary */ + diseed->ref_tag = cpu_to_le32(reftag); + diseed->ref_tag_tran = diseed->ref_tag; + + /* setup DISEED with the rest of the info */ + bf_set(lpfc_sli4_sge_dif_optx, diseed, txop); + bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop); + if (datadir == DMA_FROM_DEVICE) { + bf_set(lpfc_sli4_sge_dif_ce, diseed, checking); + bf_set(lpfc_sli4_sge_dif_re, diseed, checking); + } + bf_set(lpfc_sli4_sge_dif_ai, diseed, 1); + bf_set(lpfc_sli4_sge_dif_me, diseed, 0); + + /* Endianness conversion if necessary for DISEED */ + diseed->word2 = cpu_to_le32(diseed->word2); + diseed->word3 = cpu_to_le32(diseed->word3); + + /* advance bpl and increment sge count */ + num_sge++; + sgl++; + + /* assumption: caller has already run dma_map_sg on command data */ + scsi_for_each_sg(sc, sgde, datasegcnt, i) { + physaddr = sg_dma_address(sgde); + dma_len = sg_dma_len(sgde); + sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr)); + sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr)); + if ((i + 1) == datasegcnt) + bf_set(lpfc_sli4_sge_last, sgl, 1); + else + bf_set(lpfc_sli4_sge_last, sgl, 0); + bf_set(lpfc_sli4_sge_offset, sgl, dma_offset); + bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA); + + sgl->sge_len = cpu_to_le32(dma_len); + dma_offset += dma_len; + + sgl++; + num_sge++; + } + +out: + return num_sge; +} + +/** + * lpfc_bg_setup_sgl_prot - Setup BlockGuard SGL with protection data + * @phba: The Hba for which this call is being executed. + * @sc: pointer to scsi command we're working on + * @sgl: pointer to buffer list for protection groups + * @datacnt: number of segments of data that have been dma mapped + * @protcnt: number of segment of protection data that have been dma mapped + * + * This function sets up SGL buffer list for protection groups of + * type LPFC_PG_TYPE_DIF + * + * This is usually used when DIFs are in their own buffers, + * separate from the data. The HBA can then by instructed + * to place the DIFs in the outgoing stream. For read operations, + * The HBA could extract the DIFs and place it in DIF buffers. + * + * The buffer list for this type consists of one or more of the + * protection groups described below: + * +-------------------------+ + * start of first prot group --> | DISEED | + * +-------------------------+ + * | DIF (Prot SGE) | + * +-------------------------+ + * | Data SGE | + * +-------------------------+ + * |more Data SGE's ... (opt)| + * +-------------------------+ + * start of new prot group --> | DISEED | + * +-------------------------+ + * | ... | + * +-------------------------+ + * + * Note: It is assumed that both data and protection s/g buffers have been + * mapped for DMA + * + * Returns the number of SGEs added to the SGL. + **/ +static int +lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, + struct sli4_sge *sgl, int datacnt, int protcnt) +{ + struct scatterlist *sgde = NULL; /* s/g data entry */ + struct scatterlist *sgpe = NULL; /* s/g prot entry */ + struct sli4_sge_diseed *diseed = NULL; + dma_addr_t dataphysaddr, protphysaddr; + unsigned short curr_data = 0, curr_prot = 0; + unsigned int split_offset; + unsigned int protgroup_len, protgroup_offset = 0, protgroup_remainder; + unsigned int protgrp_blks, protgrp_bytes; + unsigned int remainder, subtotal; + int status; + unsigned char pgdone = 0, alldone = 0; + unsigned blksize; + uint32_t reftag; + uint8_t txop, rxop; + uint32_t dma_len; + uint32_t rc; + uint32_t checking = 1; + uint32_t dma_offset = 0; + int num_sge = 0; + + sgpe = scsi_prot_sglist(sc); + sgde = scsi_sglist(sc); + + if (!sgpe || !sgde) { + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, + "9082 Invalid s/g entry: data=0x%p prot=0x%p\n", sgpe, sgde); return 0; } @@ -1701,48 +2309,44 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, /* extract some info from the scsi command */ blksize = lpfc_cmd_blksize(sc); - reftag = scsi_get_lba(sc) & 0xffffffff; + reftag = (uint32_t)scsi_get_lba(sc); /* Truncate LBA */ #ifdef CONFIG_SCSI_LPFC_DEBUG_FS - /* reftag / guard tag are the only errors we can inject here */ - lpfc_bg_err_inject(phba, sc, &reftag, 0, 0xDEAD); + rc = lpfc_bg_err_inject(phba, sc, &reftag, 0, 1); + if (rc) { + if (rc == BG_ERR_SWAP) + lpfc_bg_err_opcodes(phba, sc, &txop, &rxop); + if (rc == BG_ERR_CHECK) + checking = 0; + } #endif split_offset = 0; do { - /* setup PDE5 with what we have */ - pde5 = (struct lpfc_pde5 *) bpl; - memset(pde5, 0, sizeof(struct lpfc_pde5)); - bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR); - - /* Endianness conversion if necessary for PDE5 */ - pde5->word0 = cpu_to_le32(pde5->word0); - pde5->reftag = cpu_to_le32(reftag); - - /* advance bpl and increment bde count */ - num_bde++; - bpl++; - pde6 = (struct lpfc_pde6 *) bpl; - - /* setup PDE6 with the rest of the info */ - memset(pde6, 0, sizeof(struct lpfc_pde6)); - bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR); - bf_set(pde6_optx, pde6, txop); - bf_set(pde6_oprx, pde6, rxop); - bf_set(pde6_ce, pde6, 1); - bf_set(pde6_re, pde6, 1); - bf_set(pde6_ai, pde6, 1); - bf_set(pde6_ae, pde6, 0); - bf_set(pde6_apptagval, pde6, 0); - - /* Endianness conversion if necessary for PDE6 */ - pde6->word0 = cpu_to_le32(pde6->word0); - pde6->word1 = cpu_to_le32(pde6->word1); - pde6->word2 = cpu_to_le32(pde6->word2); - - /* advance bpl and increment bde count */ - num_bde++; - bpl++; + /* setup DISEED with what we have */ + diseed = (struct sli4_sge_diseed *) sgl; + memset(diseed, 0, sizeof(struct sli4_sge_diseed)); + bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DISEED); + + /* Endianness conversion if necessary */ + diseed->ref_tag = cpu_to_le32(reftag); + diseed->ref_tag_tran = diseed->ref_tag; + + /* setup DISEED with the rest of the info */ + bf_set(lpfc_sli4_sge_dif_optx, diseed, txop); + bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop); + bf_set(lpfc_sli4_sge_dif_ce, diseed, checking); + bf_set(lpfc_sli4_sge_dif_re, diseed, checking); + bf_set(lpfc_sli4_sge_dif_ai, diseed, 1); + bf_set(lpfc_sli4_sge_dif_me, diseed, 0); + + /* Endianness conversion if necessary for DISEED */ + diseed->word2 = cpu_to_le32(diseed->word2); + diseed->word3 = cpu_to_le32(diseed->word3); + + /* advance sgl and increment bde count */ + num_sge++; + sgl++; /* setup the first BDE that points to protection buffer */ protphysaddr = sg_dma_address(sgpe) + protgroup_offset; @@ -1751,19 +2355,19 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, /* must be integer multiple of the DIF block length */ BUG_ON(protgroup_len % 8); - pde7 = (struct lpfc_pde7 *) bpl; - memset(pde7, 0, sizeof(struct lpfc_pde7)); - bf_set(pde7_type, pde7, LPFC_PDE7_DESCRIPTOR); - - pde7->addrHigh = le32_to_cpu(putPaddrHigh(protphysaddr)); - pde7->addrLow = le32_to_cpu(putPaddrLow(protphysaddr)); + /* Now setup DIF SGE */ + sgl->word2 = 0; + bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DIF); + sgl->addr_hi = le32_to_cpu(putPaddrHigh(protphysaddr)); + sgl->addr_lo = le32_to_cpu(putPaddrLow(protphysaddr)); + sgl->word2 = cpu_to_le32(sgl->word2); protgrp_blks = protgroup_len / 8; protgrp_bytes = protgrp_blks * blksize; - /* check if this pde is crossing the 4K boundary; if so split */ - if ((pde7->addrLow & 0xfff) + protgroup_len > 0x1000) { - protgroup_remainder = 0x1000 - (pde7->addrLow & 0xfff); + /* check if DIF SGE is crossing the 4K boundary; if so split */ + if ((sgl->addr_lo & 0xfff) + protgroup_len > 0x1000) { + protgroup_remainder = 0x1000 - (sgl->addr_lo & 0xfff); protgroup_offset += protgroup_remainder; protgrp_blks = protgroup_remainder / 8; protgrp_bytes = protgrp_blks * blksize; @@ -1772,47 +2376,48 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, curr_prot++; } - num_bde++; + num_sge++; - /* setup BDE's for data blocks associated with DIF data */ + /* setup SGE's for data blocks associated with DIF data */ pgdone = 0; subtotal = 0; /* total bytes processed for current prot grp */ while (!pgdone) { if (!sgde) { lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9065 BLKGRD:%s Invalid data segment\n", + "9086 BLKGRD:%s Invalid data segment\n", __func__); return 0; } - bpl++; + sgl++; dataphysaddr = sg_dma_address(sgde) + split_offset; - bpl->addrLow = le32_to_cpu(putPaddrLow(dataphysaddr)); - bpl->addrHigh = le32_to_cpu(putPaddrHigh(dataphysaddr)); remainder = sg_dma_len(sgde) - split_offset; if ((subtotal + remainder) <= protgrp_bytes) { /* we can use this whole buffer */ - bpl->tus.f.bdeSize = remainder; + dma_len = remainder; split_offset = 0; if ((subtotal + remainder) == protgrp_bytes) pgdone = 1; } else { /* must split this buffer with next prot grp */ - bpl->tus.f.bdeSize = protgrp_bytes - subtotal; - split_offset += bpl->tus.f.bdeSize; + dma_len = protgrp_bytes - subtotal; + split_offset += dma_len; } - subtotal += bpl->tus.f.bdeSize; + subtotal += dma_len; - if (datadir == DMA_TO_DEVICE) - bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64; - else - bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I; - bpl->tus.w = le32_to_cpu(bpl->tus.w); + sgl->addr_lo = cpu_to_le32(putPaddrLow(dataphysaddr)); + sgl->addr_hi = cpu_to_le32(putPaddrHigh(dataphysaddr)); + bf_set(lpfc_sli4_sge_last, sgl, 0); + bf_set(lpfc_sli4_sge_offset, sgl, dma_offset); + bf_set(lpfc_sli4_sge_type, sgl, LPFC_SGE_TYPE_DATA); - num_bde++; + sgl->sge_len = cpu_to_le32(dma_len); + dma_offset += dma_len; + + num_sge++; curr_data++; if (split_offset) @@ -1820,45 +2425,50 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, /* Move to the next s/g segment if possible */ sgde = sg_next(sgde); - } if (protgroup_offset) { /* update the reference tag */ reftag += protgrp_blks; - bpl++; + sgl++; continue; } /* are we done ? */ if (curr_prot == protcnt) { + bf_set(lpfc_sli4_sge_last, sgl, 1); alldone = 1; } else if (curr_prot < protcnt) { /* advance to next prot buffer */ sgpe = sg_next(sgpe); - bpl++; + sgl++; /* update the reference tag */ reftag += protgrp_blks; } else { /* if we're here, we have a bug */ lpfc_printf_log(phba, KERN_ERR, LOG_BG, - "9054 BLKGRD: bug in %s\n", __func__); + "9085 BLKGRD: bug in %s\n", __func__); } } while (!alldone); + out: - return num_bde; + return num_sge; } -/* +/** + * lpfc_prot_group_type - Get prtotection group type of SCSI command + * @phba: The Hba for which this call is being executed. + * @sc: pointer to scsi command we're working on + * * Given a SCSI command that supports DIF, determine composition of protection * groups involved in setting up buffer lists * - * Returns: - * for DIF (for both read and write) - * */ + * Returns: Protection group type (with or without DIF) + * + **/ static int lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc) { @@ -1885,13 +2495,17 @@ lpfc_prot_group_type(struct lpfc_hba *phba, struct scsi_cmnd *sc) return ret; } -/* +/** + * lpfc_bg_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec + * @phba: The Hba for which this call is being executed. + * @lpfc_cmd: The scsi buffer which is going to be prep'ed. + * * This is the protection/DIF aware version of * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the * two functions eventually, but for now, it's here - */ + **/ static int -lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, +lpfc_bg_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) { struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd; @@ -2147,7 +2761,21 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, cmd->sense_buffer[8] = 0; /* Information descriptor type */ cmd->sense_buffer[9] = 0xa; /* Additional descriptor length */ cmd->sense_buffer[10] = 0x80; /* Validity bit */ - bghm /= cmd->device->sector_size; + + /* bghm is a "on the wire" FC frame based count */ + switch (scsi_get_prot_op(cmd)) { + case SCSI_PROT_READ_INSERT: + case SCSI_PROT_WRITE_STRIP: + bghm /= cmd->device->sector_size; + break; + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_WRITE_INSERT: + case SCSI_PROT_READ_PASS: + case SCSI_PROT_WRITE_PASS: + bghm /= (cmd->device->sector_size + + sizeof(struct scsi_dif_tuple)); + break; + } failing_sector = scsi_get_lba(cmd); failing_sector += bghm; @@ -2291,6 +2919,180 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) return 0; } +/** + * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard + * @phba: The Hba for which this call is being executed. + * @lpfc_cmd: The scsi buffer which is going to be adjusted. + * + * Adjust the data length to account for how much data + * is actually on the wire. + * + * returns the adjusted data length + **/ +static int +lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba, + struct lpfc_scsi_buf *lpfc_cmd) +{ + struct scsi_cmnd *sc = lpfc_cmd->pCmd; + int diflen, fcpdl; + unsigned blksize; + + fcpdl = scsi_bufflen(sc); + + /* Check if there is protection data on the wire */ + if (sc->sc_data_direction == DMA_FROM_DEVICE) { + /* Read */ + if (scsi_get_prot_op(sc) == SCSI_PROT_READ_INSERT) + return fcpdl; + + } else { + /* Write */ + if (scsi_get_prot_op(sc) == SCSI_PROT_WRITE_STRIP) + return fcpdl; + } + + /* If protection data on the wire, adjust the count accordingly */ + blksize = lpfc_cmd_blksize(sc); + diflen = (fcpdl / blksize) * 8; + fcpdl += diflen; + return fcpdl; +} + +/** + * lpfc_bg_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec + * @phba: The Hba for which this call is being executed. + * @lpfc_cmd: The scsi buffer which is going to be mapped. + * + * This is the protection/DIF aware version of + * lpfc_scsi_prep_dma_buf(). It may be a good idea to combine the + * two functions eventually, but for now, it's here + **/ +static int +lpfc_bg_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, + struct lpfc_scsi_buf *lpfc_cmd) +{ + struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd; + struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd; + struct sli4_sge *sgl = (struct sli4_sge *)(lpfc_cmd->fcp_bpl); + IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb; + uint32_t num_bde = 0; + int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction; + int prot_group_type = 0; + int fcpdl; + + /* + * Start the lpfc command prep by bumping the sgl beyond fcp_cmnd + * fcp_rsp regions to the first data bde entry + */ + if (scsi_sg_count(scsi_cmnd)) { + /* + * The driver stores the segment count returned from pci_map_sg + * because this a count of dma-mappings used to map the use_sg + * pages. They are not guaranteed to be the same for those + * architectures that implement an IOMMU. + */ + datasegcnt = dma_map_sg(&phba->pcidev->dev, + scsi_sglist(scsi_cmnd), + scsi_sg_count(scsi_cmnd), datadir); + if (unlikely(!datasegcnt)) + return 1; + + sgl += 1; + /* clear the last flag in the fcp_rsp map entry */ + sgl->word2 = le32_to_cpu(sgl->word2); + bf_set(lpfc_sli4_sge_last, sgl, 0); + sgl->word2 = cpu_to_le32(sgl->word2); + + sgl += 1; + lpfc_cmd->seg_cnt = datasegcnt; + if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) { + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "9087 BLKGRD: %s: Too many sg segments" + " from dma_map_sg. Config %d, seg_cnt" + " %d\n", + __func__, phba->cfg_sg_seg_cnt, + lpfc_cmd->seg_cnt); + scsi_dma_unmap(scsi_cmnd); + return 1; + } + + prot_group_type = lpfc_prot_group_type(phba, scsi_cmnd); + + switch (prot_group_type) { + case LPFC_PG_TYPE_NO_DIF: + num_bde = lpfc_bg_setup_sgl(phba, scsi_cmnd, sgl, + datasegcnt); + /* we should have 2 or more entries in buffer list */ + if (num_bde < 2) + goto err; + break; + case LPFC_PG_TYPE_DIF_BUF:{ + /* + * This type indicates that protection buffers are + * passed to the driver, so that needs to be prepared + * for DMA + */ + protsegcnt = dma_map_sg(&phba->pcidev->dev, + scsi_prot_sglist(scsi_cmnd), + scsi_prot_sg_count(scsi_cmnd), datadir); + if (unlikely(!protsegcnt)) { + scsi_dma_unmap(scsi_cmnd); + return 1; + } + + lpfc_cmd->prot_seg_cnt = protsegcnt; + if (lpfc_cmd->prot_seg_cnt + > phba->cfg_prot_sg_seg_cnt) { + lpfc_printf_log(phba, KERN_ERR, LOG_BG, + "9088 BLKGRD: %s: Too many prot sg " + "segments from dma_map_sg. Config %d," + "prot_seg_cnt %d\n", __func__, + phba->cfg_prot_sg_seg_cnt, + lpfc_cmd->prot_seg_cnt); + dma_unmap_sg(&phba->pcidev->dev, + scsi_prot_sglist(scsi_cmnd), + scsi_prot_sg_count(scsi_cmnd), + datadir); + scsi_dma_unmap(scsi_cmnd); + return 1; + } + + num_bde = lpfc_bg_setup_sgl_prot(phba, scsi_cmnd, sgl, + datasegcnt, protsegcnt); + /* we should have 3 or more entries in buffer list */ + if (num_bde < 3) + goto err; + break; + } + case LPFC_PG_TYPE_INVALID: + default: + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, + "9083 Unexpected protection group %i\n", + prot_group_type); + return 1; + } + } + + fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd); + + fcp_cmnd->fcpDl = be32_to_cpu(fcpdl); + + /* + * Due to difference in data length between DIF/non-DIF paths, + * we need to set word 4 of IOCB here + */ + iocb_cmd->un.fcpi.fcpi_parm = fcpdl; + lpfc_cmd->cur_iocbq.iocb_flag |= LPFC_IO_DIF; + + return 0; +err: + lpfc_printf_log(phba, KERN_ERR, LOG_FCP, + "9084 Could not setup all needed BDE's" + "prot_group_type=%d, num_bde=%d\n", + prot_group_type, num_bde); + return 1; +} + /** * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer * @phba: The Hba for which this call is being executed. @@ -2309,6 +3111,25 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) return phba->lpfc_scsi_prep_dma_buf(phba, lpfc_cmd); } +/** + * lpfc_bg_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer + * using BlockGuard. + * @phba: The Hba for which this call is being executed. + * @lpfc_cmd: The scsi buffer which is going to be mapped. + * + * This routine wraps the actual DMA mapping function pointer from the + * lpfc_hba struct. + * + * Return codes: + * 1 - Error + * 0 - Success + **/ +static inline int +lpfc_bg_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) +{ + return phba->lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd); +} + /** * lpfc_send_scsi_error_event - Posts an event when there is SCSI error * @phba: Pointer to hba context object. @@ -3072,12 +3893,14 @@ lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp) case LPFC_PCI_DEV_LP: phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3; phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3; + phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s3; phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3; phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s3; break; case LPFC_PCI_DEV_OC: phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4; phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4; + phba->lpfc_bg_scsi_prep_dma_buf = lpfc_bg_scsi_prep_dma_buf_s4; phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4; phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s4; break; @@ -3250,8 +4073,7 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) ndlp = rdata->pnode; if ((scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) && - (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) || - (phba->sli_rev == LPFC_SLI_REV4))) { + (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED))) { lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9058 BLKGRD: ERROR: rcvd protected cmd:%02x" diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 1a391e2df3b..73da1c039b9 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -7839,12 +7839,16 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, bf_set(wqe_lnk, &wqe->fcp_iwrite.wqe_com, iocbq->iocb.ulpXS); /* Always open the exchange */ bf_set(wqe_xc, &wqe->fcp_iwrite.wqe_com, 0); - bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 1); bf_set(wqe_iod, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_IOD_WRITE); bf_set(wqe_lenloc, &wqe->fcp_iwrite.wqe_com, LPFC_WQE_LENLOC_WORD4); bf_set(wqe_ebde_cnt, &wqe->fcp_iwrite.wqe_com, 0); bf_set(wqe_pu, &wqe->fcp_iwrite.wqe_com, iocbq->iocb.ulpPU); + if (iocbq->iocb_flag & LPFC_IO_DIF) { + iocbq->iocb_flag &= ~LPFC_IO_DIF; + bf_set(wqe_dif, &wqe->generic.wqe_com, 1); + } + bf_set(wqe_dbde, &wqe->fcp_iwrite.wqe_com, 1); break; case CMD_FCP_IREAD64_CR: /* word3 iocb=iotag wqe=payload_offset_len */ @@ -7858,12 +7862,16 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, bf_set(wqe_lnk, &wqe->fcp_iread.wqe_com, iocbq->iocb.ulpXS); /* Always open the exchange */ bf_set(wqe_xc, &wqe->fcp_iread.wqe_com, 0); - bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 1); bf_set(wqe_iod, &wqe->fcp_iread.wqe_com, LPFC_WQE_IOD_READ); bf_set(wqe_lenloc, &wqe->fcp_iread.wqe_com, LPFC_WQE_LENLOC_WORD4); bf_set(wqe_ebde_cnt, &wqe->fcp_iread.wqe_com, 0); bf_set(wqe_pu, &wqe->fcp_iread.wqe_com, iocbq->iocb.ulpPU); + if (iocbq->iocb_flag & LPFC_IO_DIF) { + iocbq->iocb_flag &= ~LPFC_IO_DIF; + bf_set(wqe_dif, &wqe->generic.wqe_com, 1); + } + bf_set(wqe_dbde, &wqe->fcp_iread.wqe_com, 1); break; case CMD_FCP_ICMND64_CR: /* word3 iocb=IO_TAG wqe=reserved */ @@ -10672,12 +10680,14 @@ lpfc_sli4_iocb_param_transfer(struct lpfc_hba *phba, struct lpfc_wcqe_complete *wcqe) { unsigned long iflags; + uint32_t status; size_t offset = offsetof(struct lpfc_iocbq, iocb); memcpy((char *)pIocbIn + offset, (char *)pIocbOut + offset, sizeof(struct lpfc_iocbq) - offset); /* Map WCQE parameters into irspiocb parameters */ - pIocbIn->iocb.ulpStatus = bf_get(lpfc_wcqe_c_status, wcqe); + status = bf_get(lpfc_wcqe_c_status, wcqe); + pIocbIn->iocb.ulpStatus = (status & LPFC_IOCB_STATUS_MASK); if (pIocbOut->iocb_flag & LPFC_IO_FCP) if (pIocbIn->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR) pIocbIn->iocb.un.fcpi.fcpi_parm = @@ -10690,6 +10700,44 @@ lpfc_sli4_iocb_param_transfer(struct lpfc_hba *phba, pIocbIn->iocb.un.genreq64.bdl.bdeSize = wcqe->total_data_placed; } + /* Convert BG errors for completion status */ + if (status == CQE_STATUS_DI_ERROR) { + pIocbIn->iocb.ulpStatus = IOSTAT_LOCAL_REJECT; + + if (bf_get(lpfc_wcqe_c_bg_edir, wcqe)) + pIocbIn->iocb.un.ulpWord[4] = IOERR_RX_DMA_FAILED; + else + pIocbIn->iocb.un.ulpWord[4] = IOERR_TX_DMA_FAILED; + + pIocbIn->iocb.unsli3.sli3_bg.bgstat = 0; + if (bf_get(lpfc_wcqe_c_bg_ge, wcqe)) /* Guard Check failed */ + pIocbIn->iocb.unsli3.sli3_bg.bgstat |= + BGS_GUARD_ERR_MASK; + if (bf_get(lpfc_wcqe_c_bg_ae, wcqe)) /* App Tag Check failed */ + pIocbIn->iocb.unsli3.sli3_bg.bgstat |= + BGS_APPTAG_ERR_MASK; + if (bf_get(lpfc_wcqe_c_bg_re, wcqe)) /* Ref Tag Check failed */ + pIocbIn->iocb.unsli3.sli3_bg.bgstat |= + BGS_REFTAG_ERR_MASK; + + /* Check to see if there was any good data before the error */ + if (bf_get(lpfc_wcqe_c_bg_tdpv, wcqe)) { + pIocbIn->iocb.unsli3.sli3_bg.bgstat |= + BGS_HI_WATER_MARK_PRESENT_MASK; + pIocbIn->iocb.unsli3.sli3_bg.bghm = + wcqe->total_data_placed; + } + + /* + * Set ALL the error bits to indicate we don't know what + * type of error it is. + */ + if (!pIocbIn->iocb.unsli3.sli3_bg.bgstat) + pIocbIn->iocb.unsli3.sli3_bg.bgstat |= + (BGS_REFTAG_ERR_MASK | BGS_APPTAG_ERR_MASK | + BGS_GUARD_ERR_MASK); + } + /* Pick up HBA exchange busy condition */ if (bf_get(lpfc_wcqe_c_xb, wcqe)) { spin_lock_irqsave(&phba->hbalock, iflags); diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 29c13b63e32..3290b8e7ab6 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -69,6 +69,7 @@ struct lpfc_iocbq { #define LPFC_USE_FCPWQIDX 0x80 /* Submit to specified FCPWQ index */ #define DSS_SECURITY_OP 0x100 /* security IO */ #define LPFC_IO_ON_Q 0x200 /* The IO is still on the TXCMPLQ */ +#define LPFC_IO_DIF 0x400 /* T10 DIF IO */ #define LPFC_FIP_ELS_ID_MASK 0xc000 /* ELS_ID range 0-3, non-shifted mask */ #define LPFC_FIP_ELS_ID_SHIFT 14 -- cgit v1.2.3-70-g09d2 From eff4a01b6e9f8cee3c541ab7f2ad18b5bbffd124 Mon Sep 17 00:00:00 2001 From: James Smart Date: Wed, 18 Jan 2012 16:25:25 -0500 Subject: [SCSI] lpfc 8.3.29: FC Discovery state machine fixes FC Discovery state machine fixes. - Fix bug with driver returning the inactive ndlp (125743) - Fix discovery problem when in pt2pt by copying old ndlp state before state change (126887) - Fix ndlp nodelist not empty wait timeout during driver unloading (127052) Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_els.c | 2 +- drivers/scsi/lpfc/lpfc_hbadisc.c | 4 ++++ drivers/scsi/lpfc/lpfc_init.c | 9 ++++++++- 3 files changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 2e7709f680b..8db2fb3b45e 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -1526,7 +1526,6 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp, memcpy(&ndlp->active_rrqs.xri_bitmap, &rrq.xri_bitmap, sizeof(ndlp->active_rrqs.xri_bitmap)); - lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); /* Since we are swapping the ndlp passed in with the new one * and the did has already been swapped, copy over the * state and names. @@ -1536,6 +1535,7 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp, memcpy(&new_ndlp->nlp_nodename, &ndlp->nlp_nodename, sizeof(struct lpfc_name)); new_ndlp->nlp_state = ndlp->nlp_state; + lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); /* Fix up the rport accordingly */ rport = ndlp->rport; if (rport) { diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 678a4b11059..2cadb8271f1 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -5332,6 +5332,10 @@ lpfc_filter_by_rpi(struct lpfc_nodelist *ndlp, void *param) { uint16_t *rpi = param; + /* check for active node */ + if (!NLP_CHK_NODE_ACT(ndlp)) + return 0; + return ndlp->nlp_rpi == *rpi; } diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index d9628770f11..a91914968cb 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -2341,13 +2341,20 @@ lpfc_cleanup(struct lpfc_vport *vport) continue; } + /* take care of nodes in unused state before the state + * machine taking action. + */ + if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) { + lpfc_nlp_put(ndlp); + continue; + } + if (ndlp->nlp_type & NLP_FABRIC) lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RECOVERY); lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM); - } /* At this point, ALL ndlp's should be gone -- cgit v1.2.3-70-g09d2 From 728599090a9bf3aefb1226cc063295886525cd0e Mon Sep 17 00:00:00 2001 From: James Smart Date: Wed, 18 Jan 2012 16:25:38 -0500 Subject: [SCSI] lpfc 8.3.29: Locking fix and Memory leak Fixes Locking fix and Memory leak Fixes - Fix Locking code raises IRQ twice (NA) - Fix mailbox and vpi memory leaks (126818) Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_hbadisc.c | 8 ++++---- drivers/scsi/lpfc/lpfc_init.c | 6 ++++++ drivers/scsi/lpfc/lpfc_nportdisc.c | 1 + drivers/scsi/lpfc/lpfc_sli.c | 3 ++- 4 files changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 2cadb8271f1..343d87ba4df 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -2977,9 +2977,9 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la) "topology\n"); /* Get Loop Map information */ if (bf_get(lpfc_mbx_read_top_il, la)) { - spin_lock_irq(shost->host_lock); + spin_lock(shost->host_lock); vport->fc_flag |= FC_LBIT; - spin_unlock_irq(shost->host_lock); + spin_unlock(shost->host_lock); } vport->fc_myDID = bf_get(lpfc_mbx_read_top_alpa_granted, la); @@ -3029,9 +3029,9 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la) phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED; } vport->fc_myDID = phba->fc_pref_DID; - spin_lock_irq(shost->host_lock); + spin_lock(shost->host_lock); vport->fc_flag |= FC_LBIT; - spin_unlock_irq(shost->host_lock); + spin_unlock(shost->host_lock); } spin_unlock_irq(&phba->hbalock); diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index a91914968cb..b38f99f3be3 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -8178,6 +8178,9 @@ lpfc_unset_hba(struct lpfc_hba *phba) vport->load_flag |= FC_UNLOADING; spin_unlock_irq(shost->host_lock); + kfree(phba->vpi_bmask); + kfree(phba->vpi_ids); + lpfc_stop_hba_timers(phba); phba->pport->work_port_events = 0; @@ -8710,6 +8713,9 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev) /* Final cleanup of txcmplq and reset the HBA */ lpfc_sli_brdrestart(phba); + kfree(phba->vpi_bmask); + kfree(phba->vpi_ids); + lpfc_stop_hba_timers(phba); spin_lock_irq(&phba->hbalock); list_del_init(&vport->listentry); diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 32b6d72cd98..7b6b2aa5795 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -481,6 +481,7 @@ lpfc_mbx_cmpl_resume_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) ndlp, NULL); } kfree(elsiocb); + mempool_free(mboxq, phba->mbox_mem_pool); } static int diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 73da1c039b9..e5d22b10ff2 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -14840,7 +14840,8 @@ lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp, mboxq->mbox_cmpl = cmpl; mboxq->context1 = arg; mboxq->context2 = ndlp; - } + } else + mboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mboxq->vport = ndlp->vport; rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT); if (rc == MBX_NOT_FINISHED) { -- cgit v1.2.3-70-g09d2 From b42c07c8ade6ae9d74f0fd01638760650b049cdd Mon Sep 17 00:00:00 2001 From: James Smart Date: Wed, 18 Jan 2012 16:25:55 -0500 Subject: [SCSI] lpfc 8.3.29: Remove GFP_KERNEL allocation while lock is held Note: this is a replacement patch for the issue pointed out in http://www.gossamer-threads.com/lists/linux/kernel/1477270 Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_sli.c | 136 ++++++++++++++++++------------------------- 1 file changed, 57 insertions(+), 79 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index e5d22b10ff2..e0e4d8d1824 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -557,81 +557,6 @@ __lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag) return sglq; } -/** - * __lpfc_set_rrq_active - set RRQ active bit in the ndlp's xri_bitmap. - * @phba: Pointer to HBA context object. - * @ndlp: nodelist pointer for this target. - * @xritag: xri used in this exchange. - * @rxid: Remote Exchange ID. - * @send_rrq: Flag used to determine if we should send rrq els cmd. - * - * This function is called with hbalock held. - * The active bit is set in the ndlp's active rrq xri_bitmap. Allocates an - * rrq struct and adds it to the active_rrq_list. - * - * returns 0 for rrq slot for this xri - * < 0 Were not able to get rrq mem or invalid parameter. - **/ -static int -__lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, - uint16_t xritag, uint16_t rxid, uint16_t send_rrq) -{ - struct lpfc_node_rrq *rrq; - int empty; - uint32_t did = 0; - - - if (!ndlp) - return -EINVAL; - - if (!phba->cfg_enable_rrq) - return -EINVAL; - - if (phba->pport->load_flag & FC_UNLOADING) { - phba->hba_flag &= ~HBA_RRQ_ACTIVE; - goto out; - } - did = ndlp->nlp_DID; - - /* - * set the active bit even if there is no mem available. - */ - if (NLP_CHK_FREE_REQ(ndlp)) - goto out; - - if (ndlp->vport && (ndlp->vport->load_flag & FC_UNLOADING)) - goto out; - - if (test_and_set_bit(xritag, ndlp->active_rrqs.xri_bitmap)) - goto out; - - rrq = mempool_alloc(phba->rrq_pool, GFP_KERNEL); - if (rrq) { - rrq->send_rrq = send_rrq; - rrq->xritag = xritag; - rrq->rrq_stop_time = jiffies + HZ * (phba->fc_ratov + 1); - rrq->ndlp = ndlp; - rrq->nlp_DID = ndlp->nlp_DID; - rrq->vport = ndlp->vport; - rrq->rxid = rxid; - empty = list_empty(&phba->active_rrq_list); - rrq->send_rrq = send_rrq; - list_add_tail(&rrq->list, &phba->active_rrq_list); - if (!(phba->hba_flag & HBA_RRQ_ACTIVE)) { - phba->hba_flag |= HBA_RRQ_ACTIVE; - if (empty) - lpfc_worker_wake_up(phba); - } - return 0; - } -out: - lpfc_printf_log(phba, KERN_INFO, LOG_SLI, - "2921 Can't set rrq active xri:0x%x rxid:0x%x" - " DID:0x%x Send:%d\n", - xritag, rxid, did, send_rrq); - return -EINVAL; -} - /** * lpfc_clr_rrq_active - Clears RRQ active bit in xri_bitmap. * @phba: Pointer to HBA context object. @@ -860,15 +785,68 @@ lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, **/ int lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, - uint16_t xritag, uint16_t rxid, uint16_t send_rrq) + uint16_t xritag, uint16_t rxid, uint16_t send_rrq) { - int ret; unsigned long iflags; + struct lpfc_node_rrq *rrq; + int empty; + + if (!ndlp) + return -EINVAL; + + if (!phba->cfg_enable_rrq) + return -EINVAL; spin_lock_irqsave(&phba->hbalock, iflags); - ret = __lpfc_set_rrq_active(phba, ndlp, xritag, rxid, send_rrq); + if (phba->pport->load_flag & FC_UNLOADING) { + phba->hba_flag &= ~HBA_RRQ_ACTIVE; + goto out; + } + + /* + * set the active bit even if there is no mem available. + */ + if (NLP_CHK_FREE_REQ(ndlp)) + goto out; + + if (ndlp->vport && (ndlp->vport->load_flag & FC_UNLOADING)) + goto out; + + if (test_and_set_bit(xritag, ndlp->active_rrqs.xri_bitmap)) + goto out; + spin_unlock_irqrestore(&phba->hbalock, iflags); - return ret; + rrq = mempool_alloc(phba->rrq_pool, GFP_KERNEL); + if (!rrq) { + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "3155 Unable to allocate RRQ xri:0x%x rxid:0x%x" + " DID:0x%x Send:%d\n", + xritag, rxid, ndlp->nlp_DID, send_rrq); + return -EINVAL; + } + rrq->send_rrq = send_rrq; + rrq->xritag = xritag; + rrq->rrq_stop_time = jiffies + HZ * (phba->fc_ratov + 1); + rrq->ndlp = ndlp; + rrq->nlp_DID = ndlp->nlp_DID; + rrq->vport = ndlp->vport; + rrq->rxid = rxid; + rrq->send_rrq = send_rrq; + spin_lock_irqsave(&phba->hbalock, iflags); + empty = list_empty(&phba->active_rrq_list); + list_add_tail(&rrq->list, &phba->active_rrq_list); + phba->hba_flag |= HBA_RRQ_ACTIVE; + if (empty) + lpfc_worker_wake_up(phba); + spin_unlock_irqrestore(&phba->hbalock, iflags); + return 0; +out: + spin_unlock_irqrestore(&phba->hbalock, iflags); + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "2921 Can't set rrq active xri:0x%x rxid:0x%x" + " DID:0x%x Send:%d\n", + xritag, rxid, ndlp->nlp_DID, send_rrq); + return -EINVAL; } /** -- cgit v1.2.3-70-g09d2 From 331954cfd89890b246ee2d0acd911593b987f603 Mon Sep 17 00:00:00 2001 From: James Smart Date: Wed, 18 Jan 2012 16:26:08 -0500 Subject: [SCSI] lpfc 8.3.29: Update driver version to 8.3.29 Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h index dd044d01a07..f2a2602e5c3 100644 --- a/drivers/scsi/lpfc/lpfc_version.h +++ b/drivers/scsi/lpfc/lpfc_version.h @@ -18,7 +18,7 @@ * included with this package. * *******************************************************************/ -#define LPFC_DRIVER_VERSION "8.3.28" +#define LPFC_DRIVER_VERSION "8.3.29" #define LPFC_DRIVER_NAME "lpfc" #define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp" #define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp" -- cgit v1.2.3-70-g09d2 From 3c5c48011809045881d30e197577ef1dca9a3e72 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Thu, 19 Jan 2012 03:06:53 -0800 Subject: [SCSI] libiscsi: Added support to show targetalias in sysfs sysfs patch to view target alias: /sys/class/iscsi_session/session*/targetalias Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 6 ++++++ include/scsi/libiscsi.h | 1 + 2 files changed, 7 insertions(+) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 143bbe448be..00592e3bb37 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -2807,6 +2807,7 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) kfree(session->username); kfree(session->username_in); kfree(session->targetname); + kfree(session->targetalias); kfree(session->initiatorname); kfree(session->ifacename); @@ -3233,6 +3234,8 @@ int iscsi_set_param(struct iscsi_cls_conn *cls_conn, return iscsi_switch_str_param(&session->password_in, buf); case ISCSI_PARAM_TARGET_NAME: return iscsi_switch_str_param(&session->targetname, buf); + case ISCSI_PARAM_TARGET_ALIAS: + return iscsi_switch_str_param(&session->targetalias, buf); case ISCSI_PARAM_TPGT: sscanf(buf, "%d", &session->tpgt); break; @@ -3299,6 +3302,9 @@ int iscsi_session_get_param(struct iscsi_cls_session *cls_session, case ISCSI_PARAM_TARGET_NAME: len = sprintf(buf, "%s\n", session->targetname); break; + case ISCSI_PARAM_TARGET_ALIAS: + len = sprintf(buf, "%s\n", session->targetalias); + break; case ISCSI_PARAM_TPGT: len = sprintf(buf, "%d\n", session->tpgt); break; diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index cedcff371c8..2e42e9a0e0b 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -284,6 +284,7 @@ struct iscsi_session { char *password; char *password_in; char *targetname; + char *targetalias; char *ifacename; char *initiatorname; /* control data */ -- cgit v1.2.3-70-g09d2 From 6c1b8789b0dd0ceeb04229f059dde08d84f28221 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Thu, 19 Jan 2012 03:06:54 -0800 Subject: [SCSI] qla4xxx: Added support to show targetalias in sysfs Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_os.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index ce6d3b7f0c6..2bd9f1dfb6a 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -1552,6 +1552,8 @@ static void qla4xxx_copy_fwddb_param(struct scsi_qla_host *ha, (char *)ha->name_string, buflen); iscsi_set_param(cls_conn, ISCSI_PARAM_PERSISTENT_ADDRESS, (char *)ip_addr, buflen); + iscsi_set_param(cls_conn, ISCSI_PARAM_TARGET_ALIAS, + (char *)fw_ddb_entry->iscsi_alias, buflen); } void qla4xxx_update_session_conn_fwddb_param(struct scsi_qla_host *ha, @@ -1666,6 +1668,9 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, memcpy(sess->initiatorname, ha->name_string, min(sizeof(ha->name_string), sizeof(sess->initiatorname))); + iscsi_set_param(cls_conn, ISCSI_PARAM_TARGET_ALIAS, + (char *)fw_ddb_entry->iscsi_alias, 0); + exit_session_conn_param: if (fw_ddb_entry) dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), -- cgit v1.2.3-70-g09d2 From aeddde2978f8931740032880134039fb937bb07c Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Thu, 19 Jan 2012 03:06:55 -0800 Subject: [SCSI] scsi_transport_iscsi: Added support to show port_state and port_speed in sysfs sysfs patch to view port_state: /sys/class/iscsi_host/host*/port_state sysfs patch to view port_speed: /sys/class/iscsi_host/host*/port_speed Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_iscsi.c | 63 +++++++++++++++++++++++++++++++++++++ include/scsi/iscsi_if.h | 17 ++++++++++ include/scsi/scsi_transport_iscsi.h | 4 +++ 3 files changed, 84 insertions(+) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index cfd49143723..97832a2876b 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -2476,12 +2476,16 @@ iscsi_host_attr(netdev, ISCSI_HOST_PARAM_NETDEV_NAME); iscsi_host_attr(hwaddress, ISCSI_HOST_PARAM_HWADDRESS); iscsi_host_attr(ipaddress, ISCSI_HOST_PARAM_IPADDRESS); iscsi_host_attr(initiatorname, ISCSI_HOST_PARAM_INITIATOR_NAME); +iscsi_host_attr(port_state, ISCSI_HOST_PARAM_PORT_STATE); +iscsi_host_attr(port_speed, ISCSI_HOST_PARAM_PORT_SPEED); static struct attribute *iscsi_host_attrs[] = { &dev_attr_host_netdev.attr, &dev_attr_host_hwaddress.attr, &dev_attr_host_ipaddress.attr, &dev_attr_host_initiatorname.attr, + &dev_attr_host_port_state.attr, + &dev_attr_host_port_speed.attr, NULL, }; @@ -2501,6 +2505,10 @@ static umode_t iscsi_host_attr_is_visible(struct kobject *kobj, param = ISCSI_HOST_PARAM_IPADDRESS; else if (attr == &dev_attr_host_initiatorname.attr) param = ISCSI_HOST_PARAM_INITIATOR_NAME; + else if (attr == &dev_attr_host_port_state.attr) + param = ISCSI_HOST_PARAM_PORT_STATE; + else if (attr == &dev_attr_host_port_speed.attr) + param = ISCSI_HOST_PARAM_PORT_SPEED; else { WARN_ONCE(1, "Invalid host attr"); return 0; @@ -2514,6 +2522,61 @@ static struct attribute_group iscsi_host_group = { .is_visible = iscsi_host_attr_is_visible, }; +/* convert iscsi_port_speed values to ascii string name */ +static const struct { + enum iscsi_port_speed value; + char *name; +} iscsi_port_speed_names[] = { + {ISCSI_PORT_SPEED_UNKNOWN, "Unknown" }, + {ISCSI_PORT_SPEED_10MBPS, "10 Mbps" }, + {ISCSI_PORT_SPEED_100MBPS, "100 Mbps" }, + {ISCSI_PORT_SPEED_1GBPS, "1 Gbps" }, + {ISCSI_PORT_SPEED_10GBPS, "10 Gbps" }, +}; + +char *iscsi_get_port_speed_name(struct Scsi_Host *shost) +{ + int i; + char *speed = "Unknown!"; + struct iscsi_cls_host *ihost = shost->shost_data; + uint32_t port_speed = ihost->port_speed; + + for (i = 0; i < ARRAY_SIZE(iscsi_port_speed_names); i++) { + if (iscsi_port_speed_names[i].value & port_speed) { + speed = iscsi_port_speed_names[i].name; + break; + } + } + return speed; +} +EXPORT_SYMBOL_GPL(iscsi_get_port_speed_name); + +/* convert iscsi_port_state values to ascii string name */ +static const struct { + enum iscsi_port_state value; + char *name; +} iscsi_port_state_names[] = { + {ISCSI_PORT_STATE_DOWN, "LINK DOWN" }, + {ISCSI_PORT_STATE_UP, "LINK UP" }, +}; + +char *iscsi_get_port_state_name(struct Scsi_Host *shost) +{ + int i; + char *state = "Unknown!"; + struct iscsi_cls_host *ihost = shost->shost_data; + uint32_t port_state = ihost->port_state; + + for (i = 0; i < ARRAY_SIZE(iscsi_port_state_names); i++) { + if (iscsi_port_state_names[i].value & port_state) { + state = iscsi_port_state_names[i].name; + break; + } + } + return state; +} +EXPORT_SYMBOL_GPL(iscsi_get_port_state_name); + static int iscsi_session_match(struct attribute_container *cont, struct device *dev) { diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index 2703e3bedbf..e49b7c8dd21 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -416,9 +416,26 @@ enum iscsi_host_param { ISCSI_HOST_PARAM_INITIATOR_NAME, ISCSI_HOST_PARAM_NETDEV_NAME, ISCSI_HOST_PARAM_IPADDRESS, + ISCSI_HOST_PARAM_PORT_STATE, + ISCSI_HOST_PARAM_PORT_SPEED, ISCSI_HOST_PARAM_MAX, }; +/* iSCSI port Speed */ +enum iscsi_port_speed { + ISCSI_PORT_SPEED_UNKNOWN = 0x1, + ISCSI_PORT_SPEED_10MBPS = 0x2, + ISCSI_PORT_SPEED_100MBPS = 0x4, + ISCSI_PORT_SPEED_1GBPS = 0x8, + ISCSI_PORT_SPEED_10GBPS = 0x10, +}; + +/* iSCSI port state */ +enum iscsi_port_state { + ISCSI_PORT_STATE_DOWN = 0x1, + ISCSI_PORT_STATE_UP = 0x2, +}; + #define iscsi_ptr(_handle) ((void*)(unsigned long)_handle) #define iscsi_handle(_ptr) ((uint64_t)(unsigned long)_ptr) diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index 2c3a46d102f..fa7ca4e1602 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -238,6 +238,8 @@ struct iscsi_cls_host { atomic_t nr_scans; struct mutex mutex; struct request_queue *bsg_q; + uint32_t port_speed; + uint32_t port_state; }; #define iscsi_job_to_shost(_job) \ @@ -307,5 +309,7 @@ extern struct iscsi_iface *iscsi_create_iface(struct Scsi_Host *shost, uint32_t iface_num, int dd_size); extern void iscsi_destroy_iface(struct iscsi_iface *iface); extern struct iscsi_iface *iscsi_lookup_iface(int handle); +extern char *iscsi_get_port_speed_name(struct Scsi_Host *shost); +extern char *iscsi_get_port_state_name(struct Scsi_Host *shost); #endif -- cgit v1.2.3-70-g09d2 From 3254dbe9d95e1a6eb04f00e8164d14a06f6e485a Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Thu, 19 Jan 2012 03:06:56 -0800 Subject: [SCSI] qla4xxx: Added support to show port_state and port_speed in sysfs Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_fw.h | 4 ++++ drivers/scsi/qla4xxx/ql4_os.c | 47 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 51 insertions(+) diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h index 7825c141bc1..5f82b5decd0 100644 --- a/drivers/scsi/qla4xxx/ql4_fw.h +++ b/drivers/scsi/qla4xxx/ql4_fw.h @@ -396,6 +396,10 @@ struct qla_flt_region { #define FW_ADDSTATE_DHCPv4_LEASE_EXPIRED 0x0008 #define FW_ADDSTATE_LINK_UP 0x0010 #define FW_ADDSTATE_ISNS_SVC_ENABLED 0x0020 +#define FW_ADDSTATE_LINK_SPEED_10MBPS 0x0100 +#define FW_ADDSTATE_LINK_SPEED_100MBPS 0x0200 +#define FW_ADDSTATE_LINK_SPEED_1GBPS 0x0400 +#define FW_ADDSTATE_LINK_SPEED_10GBPS 0x0800 #define MBOX_CMD_GET_DATABASE_ENTRY_DEFAULTS 0x006B #define IPV6_DEFAULT_DDB_ENTRY 0x0001 diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 2bd9f1dfb6a..c1189e5fab1 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -206,6 +206,8 @@ static umode_t ql4_attr_is_visible(int param_type, int param) case ISCSI_HOST_PARAM_HWADDRESS: case ISCSI_HOST_PARAM_IPADDRESS: case ISCSI_HOST_PARAM_INITIATOR_NAME: + case ISCSI_HOST_PARAM_PORT_STATE: + case ISCSI_HOST_PARAM_PORT_SPEED: return S_IRUGO; default: return 0; @@ -548,6 +550,43 @@ static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc) return ret; } +static void qla4xxx_set_port_speed(struct Scsi_Host *shost) +{ + struct scsi_qla_host *ha = to_qla_host(shost); + struct iscsi_cls_host *ihost = shost_priv(shost); + uint32_t speed = ISCSI_PORT_SPEED_UNKNOWN; + + qla4xxx_get_firmware_state(ha); + + switch (ha->addl_fw_state & 0x0F00) { + case FW_ADDSTATE_LINK_SPEED_10MBPS: + speed = ISCSI_PORT_SPEED_10MBPS; + break; + case FW_ADDSTATE_LINK_SPEED_100MBPS: + speed = ISCSI_PORT_SPEED_100MBPS; + break; + case FW_ADDSTATE_LINK_SPEED_1GBPS: + speed = ISCSI_PORT_SPEED_1GBPS; + break; + case FW_ADDSTATE_LINK_SPEED_10GBPS: + speed = ISCSI_PORT_SPEED_10GBPS; + break; + } + ihost->port_speed = speed; +} + +static void qla4xxx_set_port_state(struct Scsi_Host *shost) +{ + struct scsi_qla_host *ha = to_qla_host(shost); + struct iscsi_cls_host *ihost = shost_priv(shost); + uint32_t state = ISCSI_PORT_STATE_DOWN; + + if (test_bit(AF_LINK_UP, &ha->flags)) + state = ISCSI_PORT_STATE_UP; + + ihost->port_state = state; +} + static int qla4xxx_host_get_param(struct Scsi_Host *shost, enum iscsi_host_param param, char *buf) { @@ -564,6 +603,14 @@ static int qla4xxx_host_get_param(struct Scsi_Host *shost, case ISCSI_HOST_PARAM_INITIATOR_NAME: len = sprintf(buf, "%s\n", ha->name_string); break; + case ISCSI_HOST_PARAM_PORT_STATE: + qla4xxx_set_port_state(shost); + len = sprintf(buf, "%s\n", iscsi_get_port_state_name(shost)); + break; + case ISCSI_HOST_PARAM_PORT_SPEED: + qla4xxx_set_port_speed(shost); + len = sprintf(buf, "%s\n", iscsi_get_port_speed_name(shost)); + break; default: return -ENOSYS; } -- cgit v1.2.3-70-g09d2 From 26b937b2a349e9e6b294703232af264af7e277c4 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Thu, 19 Jan 2012 03:06:57 -0800 Subject: [SCSI] qla4xxx: Update driver version to 5.02.00-k13 Signed-off-by: Vikas Chaudhary Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h index 133989b3a9f..601ee3da3a0 100644 --- a/drivers/scsi/qla4xxx/ql4_version.h +++ b/drivers/scsi/qla4xxx/ql4_version.h @@ -5,4 +5,4 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ -#define QLA4XXX_DRIVER_VERSION "5.02.00-k12" +#define QLA4XXX_DRIVER_VERSION "5.02.00-k13" -- cgit v1.2.3-70-g09d2 From 55e14e764df5e24bedf93220f1da167af8300c2f Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Thu, 19 Jan 2012 14:00:42 -0600 Subject: [SCSI] hpsa: fix per device memory leak on driver unload Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index b96962c3944..4dc9107456a 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -4482,6 +4482,14 @@ static void hpsa_shutdown(struct pci_dev *pdev) #endif /* CONFIG_PCI_MSI */ } +static void __devexit hpsa_free_device_info(struct ctlr_info *h) +{ + int i; + + for (i = 0; i < h->ndevices; i++) + kfree(h->dev[i]); +} + static void __devexit hpsa_remove_one(struct pci_dev *pdev) { struct ctlr_info *h; @@ -4497,6 +4505,7 @@ static void __devexit hpsa_remove_one(struct pci_dev *pdev) iounmap(h->vaddr); iounmap(h->transtable); iounmap(h->cfgtable); + hpsa_free_device_info(h); hpsa_free_sg_chain_blocks(h); pci_free_consistent(h->pdev, h->nr_cmds * sizeof(struct CommandList), -- cgit v1.2.3-70-g09d2 From d66ae08bad182e9a87859e120e61cfd51e402ed8 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Thu, 19 Jan 2012 14:00:48 -0600 Subject: [SCSI] hpsa: removed unneeded structure member max_sg_entries and fix badly named constant MAXSGENTRIES We had both h->max_sg_entries and h->maxsgentries in the per controller structure which is terribly confusing. max_sg_entries was really just a constant, 32, which defines how big the "block fetch table" is, which is as large as the max number of SG elements embedded within a command (excluding SG elements in chain blocks). MAXSGENTRIES was the constant used to denote the max number of SG elements embedded within a command, also a poor name. So renamed MAXSGENTREIS to SG_ENTRIES_IN_CMD, and removed h->max_sg_entries and replaced it with SG_ENTRIES_IN_CMD. h->maxsgentries is unchanged, and is the maximum number of sg elements the controller will support in a command, including those in chain blocks, minus 1 for the chain block pointer.. Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 20 ++++++++++---------- drivers/scsi/hpsa.h | 1 - drivers/scsi/hpsa_cmd.h | 4 ++-- 3 files changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 4dc9107456a..f4dc212ad49 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -2700,16 +2700,16 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) status = -EINVAL; goto cleanup1; } - if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) { + if (ioc->buf_size > ioc->malloc_size * SG_ENTRIES_IN_CMD) { status = -EINVAL; goto cleanup1; } - buff = kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL); + buff = kzalloc(SG_ENTRIES_IN_CMD * sizeof(char *), GFP_KERNEL); if (!buff) { status = -ENOMEM; goto cleanup1; } - buff_size = kmalloc(MAXSGENTRIES * sizeof(int), GFP_KERNEL); + buff_size = kmalloc(SG_ENTRIES_IN_CMD * sizeof(int), GFP_KERNEL); if (!buff_size) { status = -ENOMEM; goto cleanup1; @@ -4601,15 +4601,15 @@ static __devinit void hpsa_enter_performant_mode(struct ctlr_info *h, * Each SG entry requires 16 bytes. The eight registers are programmed * with the number of 16-byte blocks a command of that size requires. * The smallest command possible requires 5 such 16 byte blocks. - * the largest command possible requires MAXSGENTRIES + 4 16-byte + * the largest command possible requires SG_ENTRIES_IN_CMD + 4 16-byte * blocks. Note, this only extends to the SG entries contained * within the command block, and does not extend to chained blocks * of SG elements. bft[] contains the eight values we write to * the registers. They are not evenly distributed, but have more * sizes for small commands, and fewer sizes for larger commands. */ - int bft[8] = {5, 6, 8, 10, 12, 20, 28, MAXSGENTRIES + 4}; - BUILD_BUG_ON(28 > MAXSGENTRIES + 4); + int bft[8] = {5, 6, 8, 10, 12, 20, 28, SG_ENTRIES_IN_CMD + 4}; + BUILD_BUG_ON(28 > SG_ENTRIES_IN_CMD + 4); /* 5 = 1 s/g entry or 4k * 6 = 2 s/g entry or 8k * 8 = 4 s/g entry or 16k @@ -4622,8 +4622,9 @@ static __devinit void hpsa_enter_performant_mode(struct ctlr_info *h, memset(h->reply_pool, 0, h->reply_pool_size); h->reply_pool_head = h->reply_pool; - bft[7] = h->max_sg_entries + 4; - calc_bucket_map(bft, ARRAY_SIZE(bft), 32, h->blockFetchTable); + bft[7] = SG_ENTRIES_IN_CMD + 4; + calc_bucket_map(bft, ARRAY_SIZE(bft), + SG_ENTRIES_IN_CMD, h->blockFetchTable); for (i = 0; i < 8; i++) writel(bft[i], &h->transtable->BlockFetch[i]); @@ -4661,14 +4662,13 @@ static __devinit void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h) return; hpsa_get_max_perf_mode_cmds(h); - h->max_sg_entries = 32; /* Performant mode ring buffer and supporting data structures */ h->reply_pool_size = h->max_commands * sizeof(u64); h->reply_pool = pci_alloc_consistent(h->pdev, h->reply_pool_size, &(h->reply_pool_dhandle)); /* Need a block fetch table for performant mode */ - h->blockFetchTable = kmalloc(((h->max_sg_entries+1) * + h->blockFetchTable = kmalloc(((SG_ENTRIES_IN_CMD + 1) * sizeof(u32)), GFP_KERNEL); if ((h->reply_pool == NULL) diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index 91edafb8c7e..b4b97ebcb47 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -58,7 +58,6 @@ struct ctlr_info { unsigned long paddr; int nr_cmds; /* Number of commands allowed on this controller */ struct CfgTable __iomem *cfgtable; - int max_sg_entries; int interrupts_enabled; int major; int max_commands; diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index 3fd4715935c..516d6e53c7e 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -23,7 +23,7 @@ /* general boundary defintions */ #define SENSEINFOBYTES 32 /* may vary between hbas */ -#define MAXSGENTRIES 32 +#define SG_ENTRIES_IN_CMD 32 /* Max SG entries excluding chain blocks */ #define HPSA_SG_CHAIN 0x80000000 #define MAXREPLYQS 256 @@ -282,7 +282,7 @@ struct CommandList { struct CommandListHeader Header; struct RequestBlock Request; struct ErrDescriptor ErrDesc; - struct SGDescriptor SG[MAXSGENTRIES]; + struct SGDescriptor SG[SG_ENTRIES_IN_CMD]; /* information associated with the command */ u32 busaddr; /* physical addr of this record */ struct ErrorInfo *err_info; /* pointer to the allocated mem */ -- cgit v1.2.3-70-g09d2 From b705690d8d16f7081be3637c0bda2a681f02ecf4 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Thu, 19 Jan 2012 14:00:53 -0600 Subject: [SCSI] hpsa: combine hpsa_scsi_detect and hpsa_register_scsi hpsa_register_scsi just calls hpsa_scsi_detect. Move the guts of hpsa_scsi_detect into hpsa_register_scsi and get rid of hpsa_scsi_detect. Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 81 +++++++++++++++++++++++------------------------------ 1 file changed, 35 insertions(+), 46 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index f4dc212ad49..68df3da7878 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1257,46 +1257,6 @@ static void complete_scsi_command(struct CommandList *cp) cmd_free(h, cp); } -static int hpsa_scsi_detect(struct ctlr_info *h) -{ - struct Scsi_Host *sh; - int error; - - sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h)); - if (sh == NULL) - goto fail; - - sh->io_port = 0; - sh->n_io_port = 0; - sh->this_id = -1; - sh->max_channel = 3; - sh->max_cmd_len = MAX_COMMAND_SIZE; - sh->max_lun = HPSA_MAX_LUN; - sh->max_id = HPSA_MAX_LUN; - sh->can_queue = h->nr_cmds; - sh->cmd_per_lun = h->nr_cmds; - sh->sg_tablesize = h->maxsgentries; - h->scsi_host = sh; - sh->hostdata[0] = (unsigned long) h; - sh->irq = h->intr[h->intr_mode]; - sh->unique_id = sh->irq; - error = scsi_add_host(sh, &h->pdev->dev); - if (error) - goto fail_host_put; - scsi_scan_host(sh); - return 0; - - fail_host_put: - dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_add_host" - " failed for controller %d\n", h->ctlr); - scsi_host_put(sh); - return error; - fail: - dev_err(&h->pdev->dev, "hpsa_scsi_detect: scsi_host_alloc" - " failed for controller %d\n", h->ctlr); - return -ENOMEM; -} - static void hpsa_pci_unmap(struct pci_dev *pdev, struct CommandList *c, int sg_used, int data_direction) { @@ -2228,13 +2188,42 @@ static void hpsa_unregister_scsi(struct ctlr_info *h) static int hpsa_register_scsi(struct ctlr_info *h) { - int rc; + struct Scsi_Host *sh; + int error; - rc = hpsa_scsi_detect(h); - if (rc != 0) - dev_err(&h->pdev->dev, "hpsa_register_scsi: failed" - " hpsa_scsi_detect(), rc is %d\n", rc); - return rc; + sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h)); + if (sh == NULL) + goto fail; + + sh->io_port = 0; + sh->n_io_port = 0; + sh->this_id = -1; + sh->max_channel = 3; + sh->max_cmd_len = MAX_COMMAND_SIZE; + sh->max_lun = HPSA_MAX_LUN; + sh->max_id = HPSA_MAX_LUN; + sh->can_queue = h->nr_cmds; + sh->cmd_per_lun = h->nr_cmds; + sh->sg_tablesize = h->maxsgentries; + h->scsi_host = sh; + sh->hostdata[0] = (unsigned long) h; + sh->irq = h->intr[h->intr_mode]; + sh->unique_id = sh->irq; + error = scsi_add_host(sh, &h->pdev->dev); + if (error) + goto fail_host_put; + scsi_scan_host(sh); + return 0; + + fail_host_put: + dev_err(&h->pdev->dev, "%s: scsi_add_host" + " failed for controller %d\n", __func__, h->ctlr); + scsi_host_put(sh); + return error; + fail: + dev_err(&h->pdev->dev, "%s: scsi_host_alloc" + " failed for controller %d\n", __func__, h->ctlr); + return -ENOMEM; } static int wait_for_device_to_become_ready(struct ctlr_info *h, -- cgit v1.2.3-70-g09d2 From f79cfec6b1906ab10ef70dccd601db25c97bae17 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Thu, 19 Jan 2012 14:00:59 -0600 Subject: [SCSI] hpsa: factor out driver name Sometimes, for testing purposes (e.g. testing rmmod on a system that normally boots using hpsa) it's nice to rename the driver and split it into two drivers and restrict it to certain controllers. This makes that easier. Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 27 ++++++++++++++------------- drivers/scsi/hpsa.h | 2 +- 2 files changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 68df3da7878..d048b69962e 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -56,6 +56,7 @@ /* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */ #define HPSA_DRIVER_VERSION "2.0.2-1" #define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")" +#define HPSA "hpsa" /* How long to wait (in milliseconds) for board to go into simple mode */ #define MAX_CONFIG_WAIT 30000 @@ -202,30 +203,30 @@ static int check_for_unit_attention(struct ctlr_info *h, switch (c->err_info->SenseInfo[12]) { case STATE_CHANGED: - dev_warn(&h->pdev->dev, "hpsa%d: a state change " + dev_warn(&h->pdev->dev, HPSA "%d: a state change " "detected, command retried\n", h->ctlr); break; case LUN_FAILED: - dev_warn(&h->pdev->dev, "hpsa%d: LUN failure " + dev_warn(&h->pdev->dev, HPSA "%d: LUN failure " "detected, action required\n", h->ctlr); break; case REPORT_LUNS_CHANGED: - dev_warn(&h->pdev->dev, "hpsa%d: report LUN data " + dev_warn(&h->pdev->dev, HPSA "%d: report LUN data " "changed, action required\n", h->ctlr); /* * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012. */ break; case POWER_OR_RESET: - dev_warn(&h->pdev->dev, "hpsa%d: a power on " + dev_warn(&h->pdev->dev, HPSA "%d: a power on " "or device reset detected\n", h->ctlr); break; case UNIT_ATTENTION_CLEARED: - dev_warn(&h->pdev->dev, "hpsa%d: unit attention " + dev_warn(&h->pdev->dev, HPSA "%d: unit attention " "cleared by another initiator\n", h->ctlr); break; default: - dev_warn(&h->pdev->dev, "hpsa%d: unknown " + dev_warn(&h->pdev->dev, HPSA "%d: unknown " "unit attention detected\n", h->ctlr); break; } @@ -475,8 +476,8 @@ static struct device_attribute *hpsa_shost_attrs[] = { static struct scsi_host_template hpsa_driver_template = { .module = THIS_MODULE, - .name = "hpsa", - .proc_name = "hpsa", + .name = HPSA, + .proc_name = HPSA, .queuecommand = hpsa_scsi_queue_command, .scan_start = hpsa_scan_start, .scan_finished = hpsa_scan_finished, @@ -3343,7 +3344,7 @@ static int hpsa_controller_hard_reset(struct pci_dev *pdev, static __devinit void init_driver_version(char *driver_version, int len) { memset(driver_version, 0, len); - strncpy(driver_version, "hpsa " HPSA_DRIVER_VERSION, len - 1); + strncpy(driver_version, HPSA " " HPSA_DRIVER_VERSION, len - 1); } static __devinit int write_driver_ver_to_cfgtable( @@ -3924,7 +3925,7 @@ static int __devinit hpsa_pci_init(struct ctlr_info *h) return err; } - err = pci_request_regions(h->pdev, "hpsa"); + err = pci_request_regions(h->pdev, HPSA); if (err) { dev_err(&h->pdev->dev, "cannot obtain PCI resources, aborting\n"); @@ -4242,7 +4243,7 @@ static void start_controller_lockup_detector(struct ctlr_info *h) spin_lock_init(&lockup_detector_lock); hpsa_lockup_detector = kthread_run(detect_controller_lockup_thread, - NULL, "hpsa"); + NULL, HPSA); } if (!hpsa_lockup_detector) { dev_warn(&h->pdev->dev, @@ -4314,7 +4315,7 @@ reinit_after_soft_reset: if (rc != 0) goto clean1; - sprintf(h->devname, "hpsa%d", number_of_controllers); + sprintf(h->devname, HPSA "%d", number_of_controllers); h->ctlr = number_of_controllers; number_of_controllers++; @@ -4528,7 +4529,7 @@ static int hpsa_resume(__attribute__((unused)) struct pci_dev *pdev) } static struct pci_driver hpsa_pci_driver = { - .name = "hpsa", + .name = HPSA, .probe = hpsa_init_one, .remove = __devexit_p(hpsa_remove_one), .id_table = hpsa_pci_device_id, /* id_table */ diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index b4b97ebcb47..7b28d54fa87 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -316,7 +316,7 @@ static unsigned long SA5_completed(struct ctlr_info *h) dev_dbg(&h->pdev->dev, "Read %lx back from board\n", register_value); else - dev_dbg(&h->pdev->dev, "hpsa: FIFO Empty read\n"); + dev_dbg(&h->pdev->dev, "FIFO Empty read\n"); #endif return register_value; -- cgit v1.2.3-70-g09d2 From 9bc3711cbb67ac620bf09b4a147cbab45b2c36c0 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Thu, 19 Jan 2012 14:01:04 -0600 Subject: [SCSI] hpsa: Fix problem with MSA2xxx devices Upgraded firmware on Smart Array P7xx (and some others) made them show up as SCSI revision 5 devices and this caused the driver to fail to map MSA2xxx logical drives to the correct bus/target/lun. A symptom of this would be that the target ID of the logical drives as presented by the external storage array is ignored, and all such logical drives are assigned to target zero, differentiated only by LUN. Some multipath software reportedly does not deal well with this behavior, failing to recognize different paths to the same device as such. Signed-off-by: Stephen M. Cameron Signed-off-by: Scott Teel Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 34 +++++++++++++++------------------- 1 file changed, 15 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index d048b69962e..4e7df2e5701 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1637,30 +1637,26 @@ static void figure_bus_target_lun(struct ctlr_info *h, if (is_logical_dev_addr_mode(lunaddrbytes)) { /* logical device */ - if (unlikely(is_scsi_rev_5(h))) { - /* p1210m, logical drives lun assignments - * match SCSI REPORT LUNS data. + lunid = le32_to_cpu(*((__le32 *) lunaddrbytes)); + if (is_msa2xxx(h, device)) { + /* msa2xxx way, put logicals on bus 1 + * and match target/lun numbers box + * reports. */ - lunid = le32_to_cpu(*((__le32 *) lunaddrbytes)); - *bus = 0; - *target = 0; - *lun = (lunid & 0x3fff) + 1; + *bus = 1; + *target = (lunid >> 16) & 0x3fff; + *lun = lunid & 0x00ff; } else { - /* not p1210m... */ - lunid = le32_to_cpu(*((__le32 *) lunaddrbytes)); - if (is_msa2xxx(h, device)) { - /* msa2xxx way, put logicals on bus 1 - * and match target/lun numbers box - * reports. - */ - *bus = 1; - *target = (lunid >> 16) & 0x3fff; - *lun = lunid & 0x00ff; + if (likely(is_scsi_rev_5(h))) { + /* All current smart arrays (circa 2011) */ + *bus = 0; + *target = 0; + *lun = (lunid & 0x3fff) + 1; } else { - /* Traditional smart array way. */ + /* Traditional old smart array way. */ *bus = 0; - *lun = 0; *target = lunid & 0x3fff; + *lun = 0; } } } else { -- cgit v1.2.3-70-g09d2 From bbef6c0ce8046114c07f5b6a62ce6a239503dd61 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Thu, 19 Jan 2012 14:01:09 -0600 Subject: [SCSI] hpsa: make target and lun match what SCSI REPORT LUNs returns Some distros have a "rescan-scsi-bus.sh" script which depends on SCSI REPORT LUNs not reporting something different than what the driver tells the kernel, even if the driver uses scan_start and scan_finished methods of the SCSI host template to override the usual SCSI midlayer discovery code. Previously, 1 was added to the LUN to make room to insert the RAID controller device at LUN 0. Now, the RAID controller is moved to bus 3, and 1 is no longer added to the LUN. However, SCSI REPORT LUNS on Smart Array doesn't report physical devices like tape drives or auto-loaders as it turns out, so those particular device types still won't match. Generally the logical drives are reported first however, so at least those should match. Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 25 +++++-------------------- 1 file changed, 5 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 4e7df2e5701..264c1764bef 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1647,30 +1647,15 @@ static void figure_bus_target_lun(struct ctlr_info *h, *target = (lunid >> 16) & 0x3fff; *lun = lunid & 0x00ff; } else { - if (likely(is_scsi_rev_5(h))) { - /* All current smart arrays (circa 2011) */ - *bus = 0; - *target = 0; - *lun = (lunid & 0x3fff) + 1; - } else { - /* Traditional old smart array way. */ - *bus = 0; - *target = lunid & 0x3fff; - *lun = 0; - } + *bus = 0; + *target = 0; + *lun = (lunid & 0x3fff); } } else { - /* physical device */ if (is_hba_lunid(lunaddrbytes)) - if (unlikely(is_scsi_rev_5(h))) { - *bus = 0; /* put p1210m ctlr at 0,0,0 */ - *target = 0; - *lun = 0; - return; - } else - *bus = 3; /* traditional smartarray */ + *bus = 3; /* controller */ else - *bus = 2; /* physical disk */ + *bus = 2; /* physical device */ *target = -1; *lun = -1; /* we will fill these in later. */ } -- cgit v1.2.3-70-g09d2 From 1f310bde4631185d4462dbd544b3fa82513cdb6f Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Thu, 19 Jan 2012 14:01:14 -0600 Subject: [SCSI] hpsa: refactor hpsa_figure_bus_target_lun It should call hpsa_set_bus_target_lun rather than individually setting bus, target and lun. Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 68 +++++++++++++++++++++++------------------------------ 1 file changed, 30 insertions(+), 38 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 264c1764bef..5a795e6e994 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1630,35 +1630,30 @@ static int is_msa2xxx(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.) */ static void figure_bus_target_lun(struct ctlr_info *h, - u8 *lunaddrbytes, int *bus, int *target, int *lun, - struct hpsa_scsi_dev_t *device) -{ - u32 lunid; - - if (is_logical_dev_addr_mode(lunaddrbytes)) { - /* logical device */ - lunid = le32_to_cpu(*((__le32 *) lunaddrbytes)); - if (is_msa2xxx(h, device)) { - /* msa2xxx way, put logicals on bus 1 - * and match target/lun numbers box - * reports. - */ - *bus = 1; - *target = (lunid >> 16) & 0x3fff; - *lun = lunid & 0x00ff; - } else { - *bus = 0; - *target = 0; - *lun = (lunid & 0x3fff); - } - } else { + u8 *lunaddrbytes, struct hpsa_scsi_dev_t *device) +{ + u32 lunid = le32_to_cpu(*((__le32 *) lunaddrbytes)); + + if (!is_logical_dev_addr_mode(lunaddrbytes)) { + /* physical device, target and lun filled in later */ if (is_hba_lunid(lunaddrbytes)) - *bus = 3; /* controller */ + hpsa_set_bus_target_lun(device, 3, 0, lunid & 0x3fff); else - *bus = 2; /* physical device */ - *target = -1; - *lun = -1; /* we will fill these in later. */ + /* defer target, lun assignment for physical devices */ + hpsa_set_bus_target_lun(device, 2, -1, -1); + return; + } + /* It's a logical device */ + if (is_msa2xxx(h, device)) { + /* msa2xxx way, put logicals on bus 1 + * and match target/lun numbers box + * reports, other smart array, bus 0, target 0, match lunid + */ + hpsa_set_bus_target_lun(device, + 1, (lunid >> 16) & 0x3fff, lunid & 0x00ff); + return; } + hpsa_set_bus_target_lun(device, 0, 0, lunid & 0x3fff); } /* @@ -1675,12 +1670,11 @@ static void figure_bus_target_lun(struct ctlr_info *h, static int add_msa2xxx_enclosure_device(struct ctlr_info *h, struct hpsa_scsi_dev_t *tmpdevice, struct hpsa_scsi_dev_t *this_device, u8 *lunaddrbytes, - int bus, int target, int lun, unsigned long lunzerobits[], - int *nmsa2xxx_enclosures) + unsigned long lunzerobits[], int *nmsa2xxx_enclosures) { unsigned char scsi3addr[8]; - if (test_bit(target, lunzerobits)) + if (test_bit(tmpdevice->target, lunzerobits)) return 0; /* There is already a lun 0 on this target. */ if (!is_logical_dev_addr_mode(lunaddrbytes)) @@ -1689,11 +1683,11 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h, if (!is_msa2xxx(h, tmpdevice)) return 0; /* It's only the MSA2xxx that have this problem. */ - if (lun == 0) /* if lun is 0, then obviously we have a lun 0. */ + if (tmpdevice->lun == 0) /* if lun is 0, then we have a lun 0. */ return 0; memset(scsi3addr, 0, 8); - scsi3addr[3] = target; + scsi3addr[3] = tmpdevice->target; if (is_hba_lunid(scsi3addr)) return 0; /* Don't add the RAID controller here. */ @@ -1710,8 +1704,9 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h, if (hpsa_update_device_info(h, scsi3addr, this_device, NULL)) return 0; (*nmsa2xxx_enclosures)++; - hpsa_set_bus_target_lun(this_device, bus, target, 0); - set_bit(target, lunzerobits); + hpsa_set_bus_target_lun(this_device, + tmpdevice->bus, tmpdevice->target, 0); + set_bit(tmpdevice->target, lunzerobits); return 1; } @@ -1806,7 +1801,6 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) int ncurrent = 0; int reportlunsize = sizeof(*physdev_list) + HPSA_MAX_PHYS_LUN * 8; int i, nmsa2xxx_enclosures, ndevs_to_allocate; - int bus, target, lun; int raid_ctlr_position; DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR); @@ -1871,8 +1865,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice, &is_OBDR)) continue; /* skip it if we can't talk to it. */ - figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun, - tmpdevice); + figure_bus_target_lun(h, lunaddrbytes, tmpdevice); this_device = currentsd[ncurrent]; /* @@ -1883,14 +1876,13 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) * there is no lun 0. */ if (add_msa2xxx_enclosure_device(h, tmpdevice, this_device, - lunaddrbytes, bus, target, lun, lunzerobits, + lunaddrbytes, lunzerobits, &nmsa2xxx_enclosures)) { ncurrent++; this_device = currentsd[ncurrent]; } *this_device = *tmpdevice; - hpsa_set_bus_target_lun(this_device, bus, target, lun); switch (this_device->devtype) { case TYPE_ROM: -- cgit v1.2.3-70-g09d2 From aca4a5200dc2b0835f5477d6609a05b0401a91f3 Mon Sep 17 00:00:00 2001 From: Scott Teel Date: Thu, 19 Jan 2012 14:01:19 -0600 Subject: [SCSI] hpsa: eliminate 8 external target limitation Driver limits SAS external target IDs to range 1-8. Need to increase limit and clean up overlapping concepts of targets and paths in the code. There are several defined constants that control this: HPSA_MAX_TARGETS_PER_CTLR 16 MAX_MSA2XXX_ENCLOSURES 32 HPSA_MAX_PATHS 8 We can condense this to one constant: MAX_EXT_TARGETS 32 SAS switches allow for 8 connections, and there is capacity for 4 switches per enclosure in largest blade enclosure type. Signed-off-by: Scott Teel Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 16 ++++++++-------- drivers/scsi/hpsa_cmd.h | 5 ++--- 2 files changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 5a795e6e994..c8db43e9a38 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1694,9 +1694,9 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h, if (is_scsi_rev_5(h)) return 0; /* p1210m doesn't need to do this. */ - if (*nmsa2xxx_enclosures >= MAX_MSA2XXX_ENCLOSURES) { - dev_warn(&h->pdev->dev, "Maximum number of MSA2XXX " - "enclosures exceeded. Check your hardware " + if (*nmsa2xxx_enclosures >= MAX_EXT_TARGETS) { + dev_warn(&h->pdev->dev, "Maximum number of external " + "target devices exceeded. Check your hardware " "configuration."); return 0; } @@ -1802,7 +1802,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) int reportlunsize = sizeof(*physdev_list) + HPSA_MAX_PHYS_LUN * 8; int i, nmsa2xxx_enclosures, ndevs_to_allocate; int raid_ctlr_position; - DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR); + DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS); currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_DEVICES, GFP_KERNEL); physdev_list = kzalloc(reportlunsize, GFP_KERNEL); @@ -1819,11 +1819,11 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) logdev_list, &nlogicals)) goto out; - /* We might see up to 32 MSA2xxx enclosures, actually 8 of them - * but each of them 4 times through different paths. The plus 1 - * is for the RAID controller. + /* We might see up to the maximum number of logical and physical disks + * plus external target devices, and a device for the local RAID + * controller. */ - ndevs_to_allocate = nphysicals + nlogicals + MAX_MSA2XXX_ENCLOSURES + 1; + ndevs_to_allocate = nphysicals + nlogicals + MAX_EXT_TARGETS + 1; /* Allocate the per device structures */ for (i = 0; i < ndevs_to_allocate; i++) { diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index 516d6e53c7e..8049815d8c1 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -122,12 +122,11 @@ union u64bit { }; /* FIXME this is a per controller value (barf!) */ -#define HPSA_MAX_TARGETS_PER_CTLR 16 #define HPSA_MAX_LUN 1024 #define HPSA_MAX_PHYS_LUN 1024 -#define MAX_MSA2XXX_ENCLOSURES 32 +#define MAX_EXT_TARGETS 32 #define HPSA_MAX_DEVICES (HPSA_MAX_PHYS_LUN + HPSA_MAX_LUN + \ - MAX_MSA2XXX_ENCLOSURES + 1) /* + 1 is for the controller itself */ + MAX_EXT_TARGETS + 1) /* + 1 is for the controller itself */ /* SCSI-3 Commands */ #pragma pack(1) -- cgit v1.2.3-70-g09d2 From 4f4eb9f1d8f8eb91d0dd486deafd4800b425f289 Mon Sep 17 00:00:00 2001 From: Scott Teel Date: Thu, 19 Jan 2012 14:01:25 -0600 Subject: [SCSI] hpsa: improve naming on external target device functions Reduce confusion and inaccuracy caused by dated naming of vars and functions referring to external target devices. CURRENT NAMING: PROPOSED NAMING: "MSA2xxx devices" "external target devices" msa2xxx_model ext_target_model is_msa2xxx is_ext_target add_msa2xxx_enclosure add_ext_target_dev nmsa2xxx_enclosures n_ext_target_devs Signed-off-by: Scott Teel Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 43 ++++++++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 21 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index c8db43e9a38..74326b3b534 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -214,7 +214,8 @@ static int check_for_unit_attention(struct ctlr_info *h, dev_warn(&h->pdev->dev, HPSA "%d: report LUN data " "changed, action required\n", h->ctlr); /* - * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012. + * Note: this REPORT_LUNS_CHANGED condition only occurs on the external + * target (array) devices. */ break; case POWER_OR_RESET: @@ -1602,7 +1603,7 @@ bail_out: return 1; } -static unsigned char *msa2xxx_model[] = { +static unsigned char *ext_target_model[] = { "MSA2012", "MSA2024", "MSA2312", @@ -1611,19 +1612,19 @@ static unsigned char *msa2xxx_model[] = { NULL, }; -static int is_msa2xxx(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) +static int is_ext_target(struct ctlr_info *h, struct hpsa_scsi_dev_t *device) { int i; - for (i = 0; msa2xxx_model[i]; i++) - if (strncmp(device->model, msa2xxx_model[i], - strlen(msa2xxx_model[i])) == 0) + for (i = 0; ext_target_model[i]; i++) + if (strncmp(device->model, ext_target_model[i], + strlen(ext_target_model[i])) == 0) return 1; return 0; } /* Helper function to assign bus, target, lun mapping of devices. - * Puts non-msa2xxx logical volumes on bus 0, msa2xxx logical + * Puts non-external target logical volumes on bus 0, external target logical * volumes on bus 1, physical devices on bus 2. and the hba on bus 3. * Logical drive target and lun are assigned at this time, but * physical device lun and target assignment are deferred (assigned @@ -1644,8 +1645,8 @@ static void figure_bus_target_lun(struct ctlr_info *h, return; } /* It's a logical device */ - if (is_msa2xxx(h, device)) { - /* msa2xxx way, put logicals on bus 1 + if (is_ext_target(h, device)) { + /* external target way, put logicals on bus 1 * and match target/lun numbers box * reports, other smart array, bus 0, target 0, match lunid */ @@ -1658,7 +1659,7 @@ static void figure_bus_target_lun(struct ctlr_info *h, /* * If there is no lun 0 on a target, linux won't find any devices. - * For the MSA2xxx boxes, we have to manually detect the enclosure + * For the external targets (arrays), we have to manually detect the enclosure * which is at lun zero, as CCISS_REPORT_PHYSICAL_LUNS doesn't report * it for some reason. *tmpdevice is the target we're adding, * this_device is a pointer into the current element of currentsd[] @@ -1667,10 +1668,10 @@ static void figure_bus_target_lun(struct ctlr_info *h, * lun 0 assigned. * Returns 1 if an enclosure was added, 0 if not. */ -static int add_msa2xxx_enclosure_device(struct ctlr_info *h, +static int add_ext_target_dev(struct ctlr_info *h, struct hpsa_scsi_dev_t *tmpdevice, struct hpsa_scsi_dev_t *this_device, u8 *lunaddrbytes, - unsigned long lunzerobits[], int *nmsa2xxx_enclosures) + unsigned long lunzerobits[], int *n_ext_target_devs) { unsigned char scsi3addr[8]; @@ -1680,8 +1681,8 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h, if (!is_logical_dev_addr_mode(lunaddrbytes)) return 0; /* It's the logical targets that may lack lun 0. */ - if (!is_msa2xxx(h, tmpdevice)) - return 0; /* It's only the MSA2xxx that have this problem. */ + if (!is_ext_target(h, tmpdevice)) + return 0; /* Only external target devices have this problem. */ if (tmpdevice->lun == 0) /* if lun is 0, then we have a lun 0. */ return 0; @@ -1694,7 +1695,7 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h, if (is_scsi_rev_5(h)) return 0; /* p1210m doesn't need to do this. */ - if (*nmsa2xxx_enclosures >= MAX_EXT_TARGETS) { + if (*n_ext_target_devs >= MAX_EXT_TARGETS) { dev_warn(&h->pdev->dev, "Maximum number of external " "target devices exceeded. Check your hardware " "configuration."); @@ -1703,7 +1704,7 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h, if (hpsa_update_device_info(h, scsi3addr, this_device, NULL)) return 0; - (*nmsa2xxx_enclosures)++; + (*n_ext_target_devs)++; hpsa_set_bus_target_lun(this_device, tmpdevice->bus, tmpdevice->target, 0); set_bit(tmpdevice->target, lunzerobits); @@ -1800,7 +1801,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice; int ncurrent = 0; int reportlunsize = sizeof(*physdev_list) + HPSA_MAX_PHYS_LUN * 8; - int i, nmsa2xxx_enclosures, ndevs_to_allocate; + int i, n_ext_target_devs, ndevs_to_allocate; int raid_ctlr_position; DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS); @@ -1849,7 +1850,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) raid_ctlr_position = nphysicals + nlogicals; /* adjust our table of devices */ - nmsa2xxx_enclosures = 0; + n_ext_target_devs = 0; for (i = 0; i < nphysicals + nlogicals + 1; i++) { u8 *lunaddrbytes, is_OBDR = 0; @@ -1869,15 +1870,15 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) this_device = currentsd[ncurrent]; /* - * For the msa2xxx boxes, we have to insert a LUN 0 which + * For external target devices, we have to insert a LUN 0 which * doesn't show up in CCISS_REPORT_PHYSICAL data, but there * is nonetheless an enclosure device there. We have to * present that otherwise linux won't find anything if * there is no lun 0. */ - if (add_msa2xxx_enclosure_device(h, tmpdevice, this_device, + if (add_ext_target_dev(h, tmpdevice, this_device, lunaddrbytes, lunzerobits, - &nmsa2xxx_enclosures)) { + &n_ext_target_devs)) { ncurrent++; this_device = currentsd[ncurrent]; } -- cgit v1.2.3-70-g09d2 From bd9244f7b9508a5945dcbd015db334110a9cdecf Mon Sep 17 00:00:00 2001 From: Scott Teel Date: Thu, 19 Jan 2012 14:01:30 -0600 Subject: [SCSI] hpsa: update device attributes when they change Certain types of changes to devices should not be interpreted as a device change that would cause the device to be removed and re-added. These include RAID level and Firmware revision changes. However, these attribute changes DO need to be reflected in the controller info structure's dev structure list, so that sysfs and /proc info files for the devices will reflect the new values. Signed-off-by: Scott Teel Acked-by: Stephen M. Cameron Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 43 ++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 40 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 74326b3b534..13195072b23 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -677,6 +677,20 @@ lun_assigned: return 0; } +/* Update an entry in h->dev[] array. */ +static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno, + int entry, struct hpsa_scsi_dev_t *new_entry) +{ + /* assumes h->devlock is held */ + BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES); + + /* Raid level changed. */ + h->dev[entry]->raid_level = new_entry->raid_level; + dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d updated.\n", + scsi_device_type(new_entry->devtype), hostno, new_entry->bus, + new_entry->target, new_entry->lun); +} + /* Replace an entry from h->dev[] array. */ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno, int entry, struct hpsa_scsi_dev_t *new_entry, @@ -783,10 +797,25 @@ static inline int device_is_the_same(struct hpsa_scsi_dev_t *dev1, return 1; } +static inline int device_updated(struct hpsa_scsi_dev_t *dev1, + struct hpsa_scsi_dev_t *dev2) +{ + /* Device attributes that can change, but don't mean + * that the device is a different device, nor that the OS + * needs to be told anything about the change. + */ + if (dev1->raid_level != dev2->raid_level) + return 1; + return 0; +} + /* Find needle in haystack. If exact match found, return DEVICE_SAME, * and return needle location in *index. If scsi3addr matches, but not * vendor, model, serial num, etc. return DEVICE_CHANGED, and return needle - * location in *index. If needle not found, return DEVICE_NOT_FOUND. + * location in *index. + * In the case of a minor device attribute change, such as RAID level, just + * return DEVICE_UPDATED, along with the updated device's location in index. + * If needle not found, return DEVICE_NOT_FOUND. */ static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle, struct hpsa_scsi_dev_t *haystack[], int haystack_size, @@ -796,15 +825,19 @@ static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle, #define DEVICE_NOT_FOUND 0 #define DEVICE_CHANGED 1 #define DEVICE_SAME 2 +#define DEVICE_UPDATED 3 for (i = 0; i < haystack_size; i++) { if (haystack[i] == NULL) /* previously removed. */ continue; if (SCSI3ADDR_EQ(needle->scsi3addr, haystack[i]->scsi3addr)) { *index = i; - if (device_is_the_same(needle, haystack[i])) + if (device_is_the_same(needle, haystack[i])) { + if (device_updated(needle, haystack[i])) + return DEVICE_UPDATED; return DEVICE_SAME; - else + } else { return DEVICE_CHANGED; + } } } *index = -1; @@ -840,6 +873,8 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, * sd[] and remove them from h->dev[], and for any * devices which have changed, remove the old device * info and add the new device info. + * If minor device attributes change, just update + * the existing device structure. */ i = 0; nremoved = 0; @@ -860,6 +895,8 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, * at the bottom of hpsa_update_scsi_devices() */ sd[entry] = NULL; + } else if (device_change == DEVICE_UPDATED) { + hpsa_scsi_update_entry(h, hostno, i, sd[entry]); } i++; } -- cgit v1.2.3-70-g09d2 From de13e9654e308db6bde49c779410512ad9659bc0 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Thu, 19 Jan 2012 19:30:00 -0500 Subject: [SCSI] scsi_debug: GET LBA STATUS response length correction The SCSI GET LBA STATUS command was introduced in SBC-3 revision 20 in September 2009. At that time the Parameter Data Length field in the response had an associated byte offset of 8. Then in SBC-3 revision 25 (October 2010) that byte offset was changed to 4. The sg_get_lba_status utility in sg3_utils version 1.33 (released earlier today) has been changed to calculate the newer response length. However the implementation of GET LBA STATUS command in the scsi_debug driver still uses the original byte offset. modify the Parameter Data Length field value in the GET LBA STATUS command response to comply with the change in SBC-3 revision 25 Signed-off-by: James Bottomley --- drivers/scsi/scsi_debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 6888b2ca5bf..d2fd0efca56 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -2220,7 +2220,7 @@ static int resp_get_lba_status(struct scsi_cmnd * scmd, mapped = map_state(lba, &num); memset(arr, 0, SDEBUG_GET_LBA_STATUS_LEN); - put_unaligned_be32(16, &arr[0]); /* Parameter Data Length */ + put_unaligned_be32(20, &arr[0]); /* Parameter Data Length */ put_unaligned_be64(lba, &arr[8]); /* LBA */ put_unaligned_be32(num, &arr[16]); /* Number of blocks */ arr[20] = !mapped; /* mapped = 0, unmapped = 1 */ -- cgit v1.2.3-70-g09d2 From 263d9401a332ccec8945841dbc57707dcba1ec7d Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sat, 21 Jan 2012 00:15:27 +0900 Subject: [SCSI] hpsa: use find_first_zero_bit Use find_first_zero_bit to find the first cleared bit in a memory region. This also includes the following minor changes. - Use bitmap_zero - Reduce unnecessary atomic bitops usage Signed-off-by: Akinobu Mita Acked-by: Stephen M. Cameron Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 13195072b23..5019bea323c 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -579,21 +579,19 @@ static int hpsa_find_target_lun(struct ctlr_info *h, int i, found = 0; DECLARE_BITMAP(lun_taken, HPSA_MAX_DEVICES); - memset(&lun_taken[0], 0, HPSA_MAX_DEVICES >> 3); + bitmap_zero(lun_taken, HPSA_MAX_DEVICES); for (i = 0; i < h->ndevices; i++) { if (h->dev[i]->bus == bus && h->dev[i]->target != -1) - set_bit(h->dev[i]->target, lun_taken); + __set_bit(h->dev[i]->target, lun_taken); } - for (i = 0; i < HPSA_MAX_DEVICES; i++) { - if (!test_bit(i, lun_taken)) { - /* *bus = 1; */ - *target = i; - *lun = 0; - found = 1; - break; - } + i = find_first_zero_bit(lun_taken, HPSA_MAX_DEVICES); + if (i < HPSA_MAX_DEVICES) { + /* *bus = 1; */ + *target = i; + *lun = 0; + found = 1; } return !found; } -- cgit v1.2.3-70-g09d2 From bb8ef587a715c6a084f80b9c311136aa765ebfad Mon Sep 17 00:00:00 2001 From: Neerav Parikh Date: Sun, 22 Jan 2012 17:29:50 -0800 Subject: [SCSI] scsi_transport_fc: Add FDMI host attributes This adds FC-GS Fabric Device Management Interface (FDMI) related attributes to fc_host_attr structure. This is in preparation for allowing FDMI attributes to be registered via libfc. Signed-off-by: Neerav Parikh Tested-by: Ross Brattain Acked-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_fc.c | 30 +++++++++++++++++++++++++++++- include/scsi/scsi_transport_fc.h | 28 ++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index f59d4a05ecd..80fbe2ac0b4 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -313,7 +313,7 @@ static void fc_scsi_scan_rport(struct work_struct *work); #define FC_STARGET_NUM_ATTRS 3 #define FC_RPORT_NUM_ATTRS 10 #define FC_VPORT_NUM_ATTRS 9 -#define FC_HOST_NUM_ATTRS 22 +#define FC_HOST_NUM_ATTRS 29 struct fc_internal { struct scsi_transport_template t; @@ -399,6 +399,20 @@ static int fc_host_setup(struct transport_container *tc, struct device *dev, fc_host->max_npiv_vports = 0; memset(fc_host->serial_number, 0, sizeof(fc_host->serial_number)); + memset(fc_host->manufacturer, 0, + sizeof(fc_host->manufacturer)); + memset(fc_host->model, 0, + sizeof(fc_host->model)); + memset(fc_host->model_description, 0, + sizeof(fc_host->model_description)); + memset(fc_host->hardware_version, 0, + sizeof(fc_host->hardware_version)); + memset(fc_host->driver_version, 0, + sizeof(fc_host->driver_version)); + memset(fc_host->firmware_version, 0, + sizeof(fc_host->firmware_version)); + memset(fc_host->optionrom_version, 0, + sizeof(fc_host->optionrom_version)); fc_host->port_id = -1; fc_host->port_type = FC_PORTTYPE_UNKNOWN; @@ -1513,6 +1527,13 @@ fc_private_host_rd_attr_cast(permanent_port_name, "0x%llx\n", 20, fc_private_host_rd_attr(maxframe_size, "%u bytes\n", 20); fc_private_host_rd_attr(max_npiv_vports, "%u\n", 20); fc_private_host_rd_attr(serial_number, "%s\n", (FC_SERIAL_NUMBER_SIZE +1)); +fc_private_host_rd_attr(manufacturer, "%s\n", FC_SERIAL_NUMBER_SIZE + 1); +fc_private_host_rd_attr(model, "%s\n", FC_SYMBOLIC_NAME_SIZE + 1); +fc_private_host_rd_attr(model_description, "%s\n", FC_SYMBOLIC_NAME_SIZE + 1); +fc_private_host_rd_attr(hardware_version, "%s\n", FC_VERSION_STRING_SIZE + 1); +fc_private_host_rd_attr(driver_version, "%s\n", FC_VERSION_STRING_SIZE + 1); +fc_private_host_rd_attr(firmware_version, "%s\n", FC_VERSION_STRING_SIZE + 1); +fc_private_host_rd_attr(optionrom_version, "%s\n", FC_VERSION_STRING_SIZE + 1); /* Dynamic Host Attributes */ @@ -2208,6 +2229,13 @@ fc_attach_transport(struct fc_function_template *ft) SETUP_HOST_ATTRIBUTE_RD_NS(npiv_vports_inuse); } SETUP_HOST_ATTRIBUTE_RD(serial_number); + SETUP_HOST_ATTRIBUTE_RD(manufacturer); + SETUP_HOST_ATTRIBUTE_RD(model); + SETUP_HOST_ATTRIBUTE_RD(model_description); + SETUP_HOST_ATTRIBUTE_RD(hardware_version); + SETUP_HOST_ATTRIBUTE_RD(driver_version); + SETUP_HOST_ATTRIBUTE_RD(firmware_version); + SETUP_HOST_ATTRIBUTE_RD(optionrom_version); SETUP_HOST_ATTRIBUTE_RD(port_id); SETUP_HOST_ATTRIBUTE_RD(port_type); diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h index 2a65167a8f1..0135cbc0808 100644 --- a/include/scsi/scsi_transport_fc.h +++ b/include/scsi/scsi_transport_fc.h @@ -486,6 +486,13 @@ struct fc_host_attrs { u32 maxframe_size; u16 max_npiv_vports; char serial_number[FC_SERIAL_NUMBER_SIZE]; + char manufacturer[FC_SERIAL_NUMBER_SIZE]; + char model[FC_SYMBOLIC_NAME_SIZE]; + char model_description[FC_SYMBOLIC_NAME_SIZE]; + char hardware_version[FC_VERSION_STRING_SIZE]; + char driver_version[FC_VERSION_STRING_SIZE]; + char firmware_version[FC_VERSION_STRING_SIZE]; + char optionrom_version[FC_VERSION_STRING_SIZE]; /* Dynamic Attributes */ u32 port_id; @@ -541,6 +548,20 @@ struct fc_host_attrs { (((struct fc_host_attrs *)(x)->shost_data)->max_npiv_vports) #define fc_host_serial_number(x) \ (((struct fc_host_attrs *)(x)->shost_data)->serial_number) +#define fc_host_manufacturer(x) \ + (((struct fc_host_attrs *)(x)->shost_data)->manufacturer) +#define fc_host_model(x) \ + (((struct fc_host_attrs *)(x)->shost_data)->model) +#define fc_host_model_description(x) \ + (((struct fc_host_attrs *)(x)->shost_data)->model_description) +#define fc_host_hardware_version(x) \ + (((struct fc_host_attrs *)(x)->shost_data)->hardware_version) +#define fc_host_driver_version(x) \ + (((struct fc_host_attrs *)(x)->shost_data)->driver_version) +#define fc_host_firmware_version(x) \ + (((struct fc_host_attrs *)(x)->shost_data)->firmware_version) +#define fc_host_optionrom_version(x) \ + (((struct fc_host_attrs *)(x)->shost_data)->optionrom_version) #define fc_host_port_id(x) \ (((struct fc_host_attrs *)(x)->shost_data)->port_id) #define fc_host_port_type(x) \ @@ -700,6 +721,13 @@ struct fc_function_template { unsigned long show_host_supported_speeds:1; unsigned long show_host_maxframe_size:1; unsigned long show_host_serial_number:1; + unsigned long show_host_manufacturer:1; + unsigned long show_host_model:1; + unsigned long show_host_model_description:1; + unsigned long show_host_hardware_version:1; + unsigned long show_host_driver_version:1; + unsigned long show_host_firmware_version:1; + unsigned long show_host_optionrom_version:1; /* host dynamic attributes */ unsigned long show_host_port_id:1; unsigned long show_host_port_type:1; -- cgit v1.2.3-70-g09d2 From a9277e7783651d4e0a849f7988340b1c1cf748a4 Mon Sep 17 00:00:00 2001 From: Neerav Parikh Date: Sun, 22 Jan 2012 17:29:55 -0800 Subject: [SCSI] scsi_transport_fc: Getting FC Port Speed in sync with FC-GS The values for the 4G and 10G speeds are not in sync with definitions in SM-HBA/FC-GS-x/etc. This patch brings them in sync to these specifications. The values are converted to strings when represented via sysfs attribute, hence that should cover for user space apps as they may not see any change. Signed-off-by: Neerav Parikh Tested-by: Ross Brattain Acked-by: Robert Love Signed-off-by: James Bottomley --- include/scsi/scsi_transport_fc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h index 0135cbc0808..719faf1863a 100644 --- a/include/scsi/scsi_transport_fc.h +++ b/include/scsi/scsi_transport_fc.h @@ -126,8 +126,8 @@ enum fc_vport_state { incapable of reporting */ #define FC_PORTSPEED_1GBIT 1 #define FC_PORTSPEED_2GBIT 2 -#define FC_PORTSPEED_4GBIT 4 -#define FC_PORTSPEED_10GBIT 8 +#define FC_PORTSPEED_10GBIT 4 +#define FC_PORTSPEED_4GBIT 8 #define FC_PORTSPEED_8GBIT 0x10 #define FC_PORTSPEED_16GBIT 0x20 #define FC_PORTSPEED_NOT_NEGOTIATED (1 << 15) /* Speed not established */ -- cgit v1.2.3-70-g09d2 From 1ea2c1daf4476ac798b1de8196f11dd36425b5ae Mon Sep 17 00:00:00 2001 From: Neerav Parikh Date: Sun, 22 Jan 2012 17:30:00 -0800 Subject: [SCSI] libfc: Make the libfc Common Transport(CT) code generic Currently the libfc Common Transport(CT) calls assume that the CT requests are Name Server specific only. This patch makes it more flexible to allow more FC-GS services to make use of these routines. Signed-off-by: Neerav Parikh Tested-by: Ross Brattain Acked-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_elsct.c | 3 +-- include/scsi/fc_encode.h | 60 ++++++++++++++++++++++++++++++++++--------- 2 files changed, 49 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/libfc/fc_elsct.c b/drivers/scsi/libfc/fc_elsct.c index e17a28d324d..c2384d50147 100644 --- a/drivers/scsi/libfc/fc_elsct.c +++ b/drivers/scsi/libfc/fc_elsct.c @@ -56,8 +56,7 @@ struct fc_seq *fc_elsct_send(struct fc_lport *lport, u32 did, rc = fc_els_fill(lport, did, fp, op, &r_ctl, &fh_type); else { /* CT requests */ - rc = fc_ct_fill(lport, did, fp, op, &r_ctl, &fh_type); - did = FC_FID_DIR_SERV; + rc = fc_ct_fill(lport, did, fp, op, &r_ctl, &fh_type, &did); } if (rc) { diff --git a/include/scsi/fc_encode.h b/include/scsi/fc_encode.h index be418d8448a..73bc43329f8 100644 --- a/include/scsi/fc_encode.h +++ b/include/scsi/fc_encode.h @@ -97,7 +97,9 @@ static inline void fc_adisc_fill(struct fc_lport *lport, struct fc_frame *fp) * returns pointer to ct request. */ static inline struct fc_ct_req *fc_ct_hdr_fill(const struct fc_frame *fp, - unsigned int op, size_t req_size) + unsigned int op, size_t req_size, + enum fc_ct_fs_type fs_type, + u8 subtype) { struct fc_ct_req *ct; size_t ct_plen; @@ -106,14 +108,14 @@ static inline struct fc_ct_req *fc_ct_hdr_fill(const struct fc_frame *fp, ct = fc_frame_payload_get(fp, ct_plen); memset(ct, 0, ct_plen); ct->hdr.ct_rev = FC_CT_REV; - ct->hdr.ct_fs_type = FC_FST_DIR; - ct->hdr.ct_fs_subtype = FC_NS_SUBTYPE; + ct->hdr.ct_fs_type = fs_type; + ct->hdr.ct_fs_subtype = subtype; ct->hdr.ct_cmd = htons((u16) op); return ct; } /** - * fc_ct_fill() - Fill in a name service request frame + * fc_ct_ns_fill() - Fill in a name service request frame * @lport: local port. * @fc_id: FC_ID of non-destination rport for GPN_ID and similar inquiries. * @fp: frame to contain payload. @@ -121,7 +123,7 @@ static inline struct fc_ct_req *fc_ct_hdr_fill(const struct fc_frame *fp, * @r_ctl: pointer to FC header R_CTL. * @fh_type: pointer to FC-4 type. */ -static inline int fc_ct_fill(struct fc_lport *lport, +static inline int fc_ct_ns_fill(struct fc_lport *lport, u32 fc_id, struct fc_frame *fp, unsigned int op, enum fc_rctl *r_ctl, enum fc_fh_type *fh_type) @@ -131,23 +133,28 @@ static inline int fc_ct_fill(struct fc_lport *lport, switch (op) { case FC_NS_GPN_FT: - ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_gid_ft)); + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_gid_ft), + FC_FST_DIR, FC_NS_SUBTYPE); ct->payload.gid.fn_fc4_type = FC_TYPE_FCP; break; case FC_NS_GPN_ID: - ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_fid)); + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_fid), + FC_FST_DIR, FC_NS_SUBTYPE); + ct->payload.gid.fn_fc4_type = FC_TYPE_FCP; hton24(ct->payload.fid.fp_fid, fc_id); break; case FC_NS_RFT_ID: - ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rft)); + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rft), + FC_FST_DIR, FC_NS_SUBTYPE); hton24(ct->payload.rft.fid.fp_fid, lport->port_id); ct->payload.rft.fts = lport->fcts; break; case FC_NS_RFF_ID: - ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rff_id)); + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rff_id), + FC_FST_DIR, FC_NS_SUBTYPE); hton24(ct->payload.rff.fr_fid.fp_fid, lport->port_id); ct->payload.rff.fr_type = FC_TYPE_FCP; if (lport->service_params & FCP_SPPF_INIT_FCN) @@ -157,14 +164,16 @@ static inline int fc_ct_fill(struct fc_lport *lport, break; case FC_NS_RNN_ID: - ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rn_id)); + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rn_id), + FC_FST_DIR, FC_NS_SUBTYPE); hton24(ct->payload.rn.fr_fid.fp_fid, lport->port_id); put_unaligned_be64(lport->wwnn, &ct->payload.rn.fr_wwn); break; case FC_NS_RSPN_ID: len = strnlen(fc_host_symbolic_name(lport->host), 255); - ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rspn) + len); + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rspn) + len, + FC_FST_DIR, FC_NS_SUBTYPE); hton24(ct->payload.spn.fr_fid.fp_fid, lport->port_id); strncpy(ct->payload.spn.fr_name, fc_host_symbolic_name(lport->host), len); @@ -173,7 +182,8 @@ static inline int fc_ct_fill(struct fc_lport *lport, case FC_NS_RSNN_NN: len = strnlen(fc_host_symbolic_name(lport->host), 255); - ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rsnn) + len); + ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rsnn) + len, + FC_FST_DIR, FC_NS_SUBTYPE); put_unaligned_be64(lport->wwnn, &ct->payload.snn.fr_wwn); strncpy(ct->payload.snn.fr_name, fc_host_symbolic_name(lport->host), len); @@ -188,6 +198,32 @@ static inline int fc_ct_fill(struct fc_lport *lport, return 0; } +/** + * fc_ct_fill() - Fill in a common transport service request frame + * @lport: local port. + * @fc_id: FC_ID of non-destination rport for GPN_ID and similar inquiries. + * @fp: frame to contain payload. + * @op: CT opcode. + * @r_ctl: pointer to FC header R_CTL. + * @fh_type: pointer to FC-4 type. + */ +static inline int fc_ct_fill(struct fc_lport *lport, + u32 fc_id, struct fc_frame *fp, + unsigned int op, enum fc_rctl *r_ctl, + enum fc_fh_type *fh_type, u32 *did) +{ + int rc = -EINVAL; + + switch (fc_id) { + case FC_FID_DIR_SERV: + default: + rc = fc_ct_ns_fill(lport, fc_id, fp, op, r_ctl, fh_type); + *did = FC_FID_DIR_SERV; + break; + } + + return rc; +} /** * fc_plogi_fill - Fill in plogi request frame */ -- cgit v1.2.3-70-g09d2 From d78c317f6cd701bda9f6dbfbfbcba72f39dd6ad7 Mon Sep 17 00:00:00 2001 From: Neerav Parikh Date: Sun, 22 Jan 2012 17:30:05 -0800 Subject: [SCSI] libfc: Add support for FDMI This patch adds support for Fabric Device Management Interface as per FC-GS-4 spec. in libfc. Any driver making use of libfc can enable fdmi state machine for a given lport. If lport has enabled FDMI support the lport state machine will transition into FDMI after completing the DNS states and before entering the SCR state. The FDMI state transition is such that if there is an error, it won't stop the lport state machine from transitioning and the it will behave as if there was no FDMI support. The FDMI HBA attributes are registed with the Management server via Register HBA (RHBA) command and the port attributes are reigstered using the Register Port(RPA) command. Signed-off-by: Neerav Parikh Tested-by: Ross Brattain Acked-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_lport.c | 227 ++++++++++++++++++++++++++++++- include/scsi/fc/fc_ms.h | 213 +++++++++++++++++++++++++++++ include/scsi/fc_encode.h | 303 ++++++++++++++++++++++++++++++++++++++++++ include/scsi/libfc.h | 11 ++ 4 files changed, 751 insertions(+), 3 deletions(-) create mode 100644 include/scsi/fc/fc_ms.h diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 83750ebb527..9a0b2a9caad 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -116,6 +116,8 @@ static void fc_lport_enter_ns(struct fc_lport *, enum fc_lport_state); static void fc_lport_enter_scr(struct fc_lport *); static void fc_lport_enter_ready(struct fc_lport *); static void fc_lport_enter_logo(struct fc_lport *); +static void fc_lport_enter_fdmi(struct fc_lport *lport); +static void fc_lport_enter_ms(struct fc_lport *, enum fc_lport_state); static const char *fc_lport_state_names[] = { [LPORT_ST_DISABLED] = "disabled", @@ -126,6 +128,11 @@ static const char *fc_lport_state_names[] = { [LPORT_ST_RSPN_ID] = "RSPN_ID", [LPORT_ST_RFT_ID] = "RFT_ID", [LPORT_ST_RFF_ID] = "RFF_ID", + [LPORT_ST_FDMI] = "FDMI", + [LPORT_ST_RHBA] = "RHBA", + [LPORT_ST_RPA] = "RPA", + [LPORT_ST_DHBA] = "DHBA", + [LPORT_ST_DPRT] = "DPRT", [LPORT_ST_SCR] = "SCR", [LPORT_ST_READY] = "Ready", [LPORT_ST_LOGO] = "LOGO", @@ -183,11 +190,14 @@ static void fc_lport_rport_callback(struct fc_lport *lport, if (lport->state == LPORT_ST_DNS) { lport->dns_rdata = rdata; fc_lport_enter_ns(lport, LPORT_ST_RNN_ID); + } else if (lport->state == LPORT_ST_FDMI) { + lport->ms_rdata = rdata; + fc_lport_enter_ms(lport, LPORT_ST_DHBA); } else { FC_LPORT_DBG(lport, "Received an READY event " "on port (%6.6x) for the directory " "server, but the lport is not " - "in the DNS state, it's in the " + "in the DNS or FDMI state, it's in the " "%d state", rdata->ids.port_id, lport->state); lport->tt.rport_logoff(rdata); @@ -196,7 +206,10 @@ static void fc_lport_rport_callback(struct fc_lport *lport, case RPORT_EV_LOGO: case RPORT_EV_FAILED: case RPORT_EV_STOP: - lport->dns_rdata = NULL; + if (rdata->ids.port_id == FC_FID_DIR_SERV) + lport->dns_rdata = NULL; + else if (rdata->ids.port_id == FC_FID_MGMT_SERV) + lport->ms_rdata = NULL; break; case RPORT_EV_NONE: break; @@ -1148,7 +1161,10 @@ static void fc_lport_ns_resp(struct fc_seq *sp, struct fc_frame *fp, fc_lport_enter_ns(lport, LPORT_ST_RFF_ID); break; case LPORT_ST_RFF_ID: - fc_lport_enter_scr(lport); + if (lport->fdmi_enabled) + fc_lport_enter_fdmi(lport); + else + fc_lport_enter_scr(lport); break; default: /* should have already been caught by state checks */ @@ -1162,6 +1178,85 @@ err: mutex_unlock(&lport->lp_mutex); } +/** + * fc_lport_ms_resp() - Handle response to a management server + * exchange + * @sp: current sequence in exchange + * @fp: response frame + * @lp_arg: Fibre Channel host port instance + * + * Locking Note: This function will be called without the lport lock + * held, but it will lock, call an _enter_* function or fc_lport_error() + * and then unlock the lport. + */ +static void fc_lport_ms_resp(struct fc_seq *sp, struct fc_frame *fp, + void *lp_arg) +{ + struct fc_lport *lport = lp_arg; + struct fc_frame_header *fh; + struct fc_ct_hdr *ct; + + FC_LPORT_DBG(lport, "Received a ms %s\n", fc_els_resp_type(fp)); + + if (fp == ERR_PTR(-FC_EX_CLOSED)) + return; + + mutex_lock(&lport->lp_mutex); + + if (lport->state < LPORT_ST_RHBA || lport->state > LPORT_ST_DPRT) { + FC_LPORT_DBG(lport, "Received a management server response, " + "but in state %s\n", fc_lport_state(lport)); + if (IS_ERR(fp)) + goto err; + goto out; + } + + if (IS_ERR(fp)) { + fc_lport_error(lport, fp); + goto err; + } + + fh = fc_frame_header_get(fp); + ct = fc_frame_payload_get(fp, sizeof(*ct)); + + if (fh && ct && fh->fh_type == FC_TYPE_CT && + ct->ct_fs_type == FC_FST_MGMT && + ct->ct_fs_subtype == FC_FDMI_SUBTYPE) { + FC_LPORT_DBG(lport, "Received a management server response, " + "reason=%d explain=%d\n", + ct->ct_reason, + ct->ct_explan); + + switch (lport->state) { + case LPORT_ST_RHBA: + if (ntohs(ct->ct_cmd) == FC_FS_ACC) + fc_lport_enter_ms(lport, LPORT_ST_RPA); + else /* Error Skip RPA */ + fc_lport_enter_scr(lport); + break; + case LPORT_ST_RPA: + fc_lport_enter_scr(lport); + break; + case LPORT_ST_DPRT: + fc_lport_enter_ms(lport, LPORT_ST_RHBA); + break; + case LPORT_ST_DHBA: + fc_lport_enter_ms(lport, LPORT_ST_DPRT); + break; + default: + /* should have already been caught by state checks */ + break; + } + } else { + /* Invalid Frame? */ + fc_lport_error(lport, fp); + } +out: + fc_frame_free(fp); +err: + mutex_unlock(&lport->lp_mutex); +} + /** * fc_lport_scr_resp() - Handle response to State Change Register (SCR) request * @sp: current sequence in SCR exchange @@ -1338,6 +1433,123 @@ err: fc_lport_error(lport, NULL); } +/** + * fc_lport_enter_ms() - management server commands + * @lport: Fibre Channel local port to register + * + * Locking Note: The lport lock is expected to be held before calling + * this routine. + */ +static void fc_lport_enter_ms(struct fc_lport *lport, enum fc_lport_state state) +{ + struct fc_frame *fp; + enum fc_fdmi_req cmd; + int size = sizeof(struct fc_ct_hdr); + size_t len; + int numattrs; + + FC_LPORT_DBG(lport, "Entered %s state from %s state\n", + fc_lport_state_names[state], + fc_lport_state(lport)); + + fc_lport_state_enter(lport, state); + + switch (state) { + case LPORT_ST_RHBA: + cmd = FC_FDMI_RHBA; + /* Number of HBA Attributes */ + numattrs = 10; + len = sizeof(struct fc_fdmi_rhba); + len -= sizeof(struct fc_fdmi_attr_entry); + len += (numattrs * FC_FDMI_ATTR_ENTRY_HEADER_LEN); + len += FC_FDMI_HBA_ATTR_NODENAME_LEN; + len += FC_FDMI_HBA_ATTR_MANUFACTURER_LEN; + len += FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN; + len += FC_FDMI_HBA_ATTR_MODEL_LEN; + len += FC_FDMI_HBA_ATTR_MODELDESCR_LEN; + len += FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN; + len += FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN; + len += FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN; + len += FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN; + len += FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN; + + size += len; + break; + case LPORT_ST_RPA: + cmd = FC_FDMI_RPA; + /* Number of Port Attributes */ + numattrs = 6; + len = sizeof(struct fc_fdmi_rpa); + len -= sizeof(struct fc_fdmi_attr_entry); + len += (numattrs * FC_FDMI_ATTR_ENTRY_HEADER_LEN); + len += FC_FDMI_PORT_ATTR_FC4TYPES_LEN; + len += FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN; + len += FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN; + len += FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN; + len += FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN; + len += FC_FDMI_PORT_ATTR_HOSTNAME_LEN; + + size += len; + break; + case LPORT_ST_DPRT: + cmd = FC_FDMI_DPRT; + len = sizeof(struct fc_fdmi_dprt); + size += len; + break; + case LPORT_ST_DHBA: + cmd = FC_FDMI_DHBA; + len = sizeof(struct fc_fdmi_dhba); + size += len; + break; + default: + fc_lport_error(lport, NULL); + return; + } + + FC_LPORT_DBG(lport, "Cmd=0x%x Len %d size %d\n", + cmd, (int)len, size); + fp = fc_frame_alloc(lport, size); + if (!fp) { + fc_lport_error(lport, fp); + return; + } + + if (!lport->tt.elsct_send(lport, FC_FID_MGMT_SERV, fp, cmd, + fc_lport_ms_resp, + lport, 3 * lport->r_a_tov)) + fc_lport_error(lport, fp); +} + +/** + * fc_rport_enter_fdmi() - Create a fc_rport for the management server + * @lport: The local port requesting a remote port for the management server + * + * Locking Note: The lport lock is expected to be held before calling + * this routine. + */ +static void fc_lport_enter_fdmi(struct fc_lport *lport) +{ + struct fc_rport_priv *rdata; + + FC_LPORT_DBG(lport, "Entered FDMI state from %s state\n", + fc_lport_state(lport)); + + fc_lport_state_enter(lport, LPORT_ST_FDMI); + + mutex_lock(&lport->disc.disc_mutex); + rdata = lport->tt.rport_create(lport, FC_FID_MGMT_SERV); + mutex_unlock(&lport->disc.disc_mutex); + if (!rdata) + goto err; + + rdata->ops = &fc_lport_rport_ops; + lport->tt.rport_login(rdata); + return; + +err: + fc_lport_error(lport, NULL); +} + /** * fc_lport_timeout() - Handler for the retry_work timer * @work: The work struct of the local port @@ -1371,6 +1583,15 @@ static void fc_lport_timeout(struct work_struct *work) case LPORT_ST_RFF_ID: fc_lport_enter_ns(lport, lport->state); break; + case LPORT_ST_FDMI: + fc_lport_enter_fdmi(lport); + break; + case LPORT_ST_RHBA: + case LPORT_ST_RPA: + case LPORT_ST_DHBA: + case LPORT_ST_DPRT: + fc_lport_enter_ms(lport, lport->state); + break; case LPORT_ST_SCR: fc_lport_enter_scr(lport); break; diff --git a/include/scsi/fc/fc_ms.h b/include/scsi/fc/fc_ms.h new file mode 100644 index 00000000000..f52b921b5c7 --- /dev/null +++ b/include/scsi/fc/fc_ms.h @@ -0,0 +1,213 @@ +/* * Copyright(c) 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Maintained at www.Open-FCoE.org + */ + +#ifndef _FC_MS_H_ +#define _FC_MS_H_ + +#include + +/* + * Fibre Channel Services - Management Service (MS) + * From T11.org FC-GS-4 Rev 7.91 February 4, 2004 + */ + +/* + * Fabric Device Management Interface + */ + +/* + * Common-transport sub-type for FDMI + */ +#define FC_FDMI_SUBTYPE 0x10 /* fs_ct_hdr.ct_fs_subtype */ + +/* + * Management server FDMI Requests. + */ +enum fc_fdmi_req { + FC_FDMI_GRHL = 0x0100, /* Get Registered HBA List */ + FC_FDMI_GHAT = 0x0101, /* Get HBA Attributes */ + FC_FDMI_GRPL = 0x0102, /* Get Registered Port List */ + FC_FDMI_GPAT = 0x0110, /* Get Port Attributes */ + FC_FDMI_RHBA = 0x0200, /* Register HBA */ + FC_FDMI_RHAT = 0x0201, /* Register HBA Attributes */ + FC_FDMI_RPRT = 0x0210, /* Register Port */ + FC_FDMI_RPA = 0x0211, /* Register Port Attributes */ + FC_FDMI_DHBA = 0x0300, /* Deregister HBA */ + FC_FDMI_DHAT = 0x0301, /* Deregister HBA Attributes */ + FC_FDMI_DPRT = 0x0310, /* Deregister Port */ + FC_FDMI_DPA = 0x0311, /* Deregister Port Attributes */ +}; + +/* + * HBA Attribute Entry Type + */ +enum fc_fdmi_hba_attr_type { + FC_FDMI_HBA_ATTR_NODENAME = 0x0001, + FC_FDMI_HBA_ATTR_MANUFACTURER = 0x0002, + FC_FDMI_HBA_ATTR_SERIALNUMBER = 0x0003, + FC_FDMI_HBA_ATTR_MODEL = 0x0004, + FC_FDMI_HBA_ATTR_MODELDESCRIPTION = 0x0005, + FC_FDMI_HBA_ATTR_HARDWAREVERSION = 0x0006, + FC_FDMI_HBA_ATTR_DRIVERVERSION = 0x0007, + FC_FDMI_HBA_ATTR_OPTIONROMVERSION = 0x0008, + FC_FDMI_HBA_ATTR_FIRMWAREVERSION = 0x0009, + FC_FDMI_HBA_ATTR_OSNAMEVERSION = 0x000A, + FC_FDMI_HBA_ATTR_MAXCTPAYLOAD = 0x000B, +}; + +/* + * HBA Attribute Length + */ +#define FC_FDMI_HBA_ATTR_NODENAME_LEN 8 +#define FC_FDMI_HBA_ATTR_MANUFACTURER_LEN 64 +#define FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN 64 +#define FC_FDMI_HBA_ATTR_MODEL_LEN 256 +#define FC_FDMI_HBA_ATTR_MODELDESCR_LEN 256 +#define FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN 256 +#define FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN 256 +#define FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN 256 +#define FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN 256 +#define FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN 256 +#define FC_FDMI_HBA_ATTR_MAXCTPAYLOAD_LEN 4 + +/* + * Port Attribute Type + */ +enum fc_fdmi_port_attr_type { + FC_FDMI_PORT_ATTR_FC4TYPES = 0x0001, + FC_FDMI_PORT_ATTR_SUPPORTEDSPEED = 0x0002, + FC_FDMI_PORT_ATTR_CURRENTPORTSPEED = 0x0003, + FC_FDMI_PORT_ATTR_MAXFRAMESIZE = 0x0004, + FC_FDMI_PORT_ATTR_OSDEVICENAME = 0x0005, + FC_FDMI_PORT_ATTR_HOSTNAME = 0x0006, +}; + +/* + * Port Attribute Length + */ +#define FC_FDMI_PORT_ATTR_FC4TYPES_LEN 32 +#define FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN 4 +#define FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN 4 +#define FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN 4 +#define FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN 256 +#define FC_FDMI_PORT_ATTR_HOSTNAME_LEN 256 + +/* + * HBA Attribute ID + */ +struct fc_fdmi_hba_identifier { + __be64 id; +}; + +/* + * Port Name + */ +struct fc_fdmi_port_name { + __be64 portname; +}; + +/* + * Attribute Entry Block for HBA/Port Attributes + */ +#define FC_FDMI_ATTR_ENTRY_HEADER_LEN 4 +struct fc_fdmi_attr_entry { + __be16 type; + __be16 len; + __u8 value[1]; +} __attribute__((__packed__)); + +/* + * Common for HBA/Port Attributes + */ +struct fs_fdmi_attrs { + __be32 numattrs; + struct fc_fdmi_attr_entry attr[1]; +} __attribute__((__packed__)); + +/* + * Registered Port List + */ +struct fc_fdmi_rpl { + __be32 numport; + struct fc_fdmi_port_name port[1]; +} __attribute__((__packed__)); + +/* + * Register HBA (RHBA) + */ +struct fc_fdmi_rhba { + struct fc_fdmi_hba_identifier hbaid; + struct fc_fdmi_rpl port; + struct fs_fdmi_attrs hba_attrs; +} __attribute__((__packed__)); + +/* + * Register HBA Attributes (RHAT) + */ +struct fc_fdmi_rhat { + struct fc_fdmi_hba_identifier hbaid; + struct fs_fdmi_attrs hba_attrs; +} __attribute__((__packed__)); + +/* + * Register Port (RPRT) + */ +struct fc_fdmi_rprt { + struct fc_fdmi_hba_identifier hbaid; + struct fc_fdmi_port_name port; + struct fs_fdmi_attrs hba_attrs; +} __attribute__((__packed__)); + +/* + * Register Port Attributes (RPA) + */ +struct fc_fdmi_rpa { + struct fc_fdmi_port_name port; + struct fs_fdmi_attrs hba_attrs; +} __attribute__((__packed__)); + +/* + * Deregister Port (DPRT) + */ +struct fc_fdmi_dprt { + struct fc_fdmi_port_name port; +} __attribute__((__packed__)); + +/* + * Deregister Port Attributes (DPA) + */ +struct fc_fdmi_dpa { + struct fc_fdmi_port_name port; + struct fs_fdmi_attrs hba_attrs; +} __attribute__((__packed__)); + +/* + * Deregister HBA Attributes (DHAT) + */ +struct fc_fdmi_dhat { + struct fc_fdmi_hba_identifier hbaid; +} __attribute__((__packed__)); + +/* + * Deregister HBA (DHBA) + */ +struct fc_fdmi_dhba { + struct fc_fdmi_hba_identifier hbaid; +} __attribute__((__packed__)); + +#endif /* _FC_MS_H_ */ diff --git a/include/scsi/fc_encode.h b/include/scsi/fc_encode.h index 73bc43329f8..35fd4744f3e 100644 --- a/include/scsi/fc_encode.h +++ b/include/scsi/fc_encode.h @@ -20,6 +20,7 @@ #ifndef _FC_ENCODE_H_ #define _FC_ENCODE_H_ #include +#include /* * F_CTL values for simple requests and responses. @@ -43,6 +44,10 @@ struct fc_ct_req { struct fc_ns_fid fid; struct fc_ns_rsnn snn; struct fc_ns_rspn spn; + struct fc_fdmi_rhba rhba; + struct fc_fdmi_rpa rpa; + struct fc_fdmi_dprt dprt; + struct fc_fdmi_dhba dhba; } payload; }; @@ -198,6 +203,300 @@ static inline int fc_ct_ns_fill(struct fc_lport *lport, return 0; } +/** + * fc_ct_ms_fill() - Fill in a mgmt service request frame + * @lport: local port. + * @fc_id: FC_ID of non-destination rport for GPN_ID and similar inquiries. + * @fp: frame to contain payload. + * @op: CT opcode. + * @r_ctl: pointer to FC header R_CTL. + * @fh_type: pointer to FC-4 type. + */ +static inline int fc_ct_ms_fill(struct fc_lport *lport, + u32 fc_id, struct fc_frame *fp, + unsigned int op, enum fc_rctl *r_ctl, + enum fc_fh_type *fh_type) +{ + struct fc_ct_req *ct; + size_t len; + struct fc_fdmi_attr_entry *entry; + struct fs_fdmi_attrs *hba_attrs; + int numattrs = 0; + + switch (op) { + case FC_FDMI_RHBA: + numattrs = 10; + len = sizeof(struct fc_fdmi_rhba); + len -= sizeof(struct fc_fdmi_attr_entry); + len += (numattrs * FC_FDMI_ATTR_ENTRY_HEADER_LEN); + len += FC_FDMI_HBA_ATTR_NODENAME_LEN; + len += FC_FDMI_HBA_ATTR_MANUFACTURER_LEN; + len += FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN; + len += FC_FDMI_HBA_ATTR_MODEL_LEN; + len += FC_FDMI_HBA_ATTR_MODELDESCR_LEN; + len += FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN; + len += FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN; + len += FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN; + len += FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN; + len += FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN; + ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT, + FC_FDMI_SUBTYPE); + + /* HBA Identifier */ + put_unaligned_be64(lport->wwpn, &ct->payload.rhba.hbaid.id); + /* Number of Ports - always 1 */ + put_unaligned_be32(1, &ct->payload.rhba.port.numport); + /* Port Name */ + put_unaligned_be64(lport->wwpn, + &ct->payload.rhba.port.port[0].portname); + + /* HBA Attributes */ + put_unaligned_be32(numattrs, + &ct->payload.rhba.hba_attrs.numattrs); + hba_attrs = &ct->payload.rhba.hba_attrs; + entry = (struct fc_fdmi_attr_entry *)hba_attrs->attr; + /* NodeName*/ + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_NODENAME_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_NODENAME, + &entry->type); + put_unaligned_be16(len, &entry->len); + put_unaligned_be64(lport->wwnn, + (__be64 *)&entry->value[0]); + + /* Manufacturer */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_NODENAME_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_MANUFACTURER_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_MANUFACTURER, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_manufacturer(lport->host), + FC_FDMI_HBA_ATTR_MANUFACTURER_LEN); + + /* SerialNumber */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_MANUFACTURER_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_SERIALNUMBER, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_serial_number(lport->host), + FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN); + + /* Model */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_SERIALNUMBER_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_MODEL_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_MODEL, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_model(lport->host), + FC_FDMI_HBA_ATTR_MODEL_LEN); + + /* Model Description */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_MODEL_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_MODELDESCR_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_MODELDESCRIPTION, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_model_description(lport->host), + FC_FDMI_HBA_ATTR_MODELDESCR_LEN); + + /* Hardware Version */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_MODELDESCR_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_HARDWAREVERSION, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_hardware_version(lport->host), + FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN); + + /* Driver Version */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_HARDWAREVERSION_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_DRIVERVERSION, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_driver_version(lport->host), + FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN); + + /* OptionROM Version */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_DRIVERVERSION_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_OPTIONROMVERSION, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_optionrom_version(lport->host), + FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN); + + /* Firmware Version */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_OPTIONROMVERSION_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_FIRMWAREVERSION, + &entry->type); + put_unaligned_be16(len, &entry->len); + strncpy((char *)&entry->value, + fc_host_firmware_version(lport->host), + FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN); + + /* OS Name and Version */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_HBA_ATTR_FIRMWAREVERSION_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN; + put_unaligned_be16(FC_FDMI_HBA_ATTR_OSNAMEVERSION, + &entry->type); + put_unaligned_be16(len, &entry->len); + snprintf((char *)&entry->value, + FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN, + "%s v%s", + init_utsname()->sysname, + init_utsname()->release); + break; + case FC_FDMI_RPA: + numattrs = 6; + len = sizeof(struct fc_fdmi_rpa); + len -= sizeof(struct fc_fdmi_attr_entry); + len += (numattrs * FC_FDMI_ATTR_ENTRY_HEADER_LEN); + len += FC_FDMI_PORT_ATTR_FC4TYPES_LEN; + len += FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN; + len += FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN; + len += FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN; + len += FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN; + len += FC_FDMI_PORT_ATTR_HOSTNAME_LEN; + ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT, + FC_FDMI_SUBTYPE); + + /* Port Name */ + put_unaligned_be64(lport->wwpn, + &ct->payload.rpa.port.portname); + + /* Port Attributes */ + put_unaligned_be32(numattrs, + &ct->payload.rpa.hba_attrs.numattrs); + + hba_attrs = &ct->payload.rpa.hba_attrs; + entry = (struct fc_fdmi_attr_entry *)hba_attrs->attr; + + /* FC4 types */ + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_PORT_ATTR_FC4TYPES_LEN; + put_unaligned_be16(FC_FDMI_PORT_ATTR_FC4TYPES, + &entry->type); + put_unaligned_be16(len, &entry->len); + memcpy(&entry->value, fc_host_supported_fc4s(lport->host), + FC_FDMI_PORT_ATTR_FC4TYPES_LEN); + + /* Supported Speed */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_PORT_ATTR_FC4TYPES_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN; + put_unaligned_be16(FC_FDMI_PORT_ATTR_SUPPORTEDSPEED, + &entry->type); + put_unaligned_be16(len, &entry->len); + + put_unaligned_be32(fc_host_supported_speeds(lport->host), + &entry->value); + + /* Current Port Speed */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_PORT_ATTR_SUPPORTEDSPEED_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN; + put_unaligned_be16(FC_FDMI_PORT_ATTR_CURRENTPORTSPEED, + &entry->type); + put_unaligned_be16(len, &entry->len); + put_unaligned_be32(lport->link_speed, + &entry->value); + + /* Max Frame Size */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_PORT_ATTR_CURRENTPORTSPEED_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN; + put_unaligned_be16(FC_FDMI_PORT_ATTR_MAXFRAMESIZE, + &entry->type); + put_unaligned_be16(len, &entry->len); + put_unaligned_be32(fc_host_maxframe_size(lport->host), + &entry->value); + + /* OS Device Name */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN; + put_unaligned_be16(FC_FDMI_PORT_ATTR_OSDEVICENAME, + &entry->type); + put_unaligned_be16(len, &entry->len); + /* Use the sysfs device name */ + strncpy((char *)&entry->value, + dev_name(&lport->host->shost_gendev), + strnlen(dev_name(&lport->host->shost_gendev), + FC_FDMI_PORT_ATTR_HOSTNAME_LEN)); + + /* Host Name */ + entry = (struct fc_fdmi_attr_entry *)((char *)entry->value + + FC_FDMI_PORT_ATTR_OSDEVICENAME_LEN); + len = FC_FDMI_ATTR_ENTRY_HEADER_LEN; + len += FC_FDMI_PORT_ATTR_HOSTNAME_LEN; + put_unaligned_be16(FC_FDMI_PORT_ATTR_HOSTNAME, + &entry->type); + put_unaligned_be16(len, &entry->len); + if (strlen(fc_host_system_hostname(lport->host))) + strncpy((char *)&entry->value, + fc_host_system_hostname(lport->host), + strnlen(fc_host_system_hostname(lport->host), + FC_FDMI_PORT_ATTR_HOSTNAME_LEN)); + else + strncpy((char *)&entry->value, + init_utsname()->nodename, + FC_FDMI_PORT_ATTR_HOSTNAME_LEN); + break; + case FC_FDMI_DPRT: + len = sizeof(struct fc_fdmi_dprt); + ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT, + FC_FDMI_SUBTYPE); + /* Port Name */ + put_unaligned_be64(lport->wwpn, + &ct->payload.dprt.port.portname); + break; + case FC_FDMI_DHBA: + len = sizeof(struct fc_fdmi_dhba); + ct = fc_ct_hdr_fill(fp, op, len, FC_FST_MGMT, + FC_FDMI_SUBTYPE); + /* HBA Identifier */ + put_unaligned_be64(lport->wwpn, &ct->payload.dhba.hbaid.id); + break; + default: + return -EINVAL; + } + *r_ctl = FC_RCTL_DD_UNSOL_CTL; + *fh_type = FC_TYPE_CT; + return 0; +} + /** * fc_ct_fill() - Fill in a common transport service request frame * @lport: local port. @@ -215,6 +514,10 @@ static inline int fc_ct_fill(struct fc_lport *lport, int rc = -EINVAL; switch (fc_id) { + case FC_FID_MGMT_SERV: + rc = fc_ct_ms_fill(lport, fc_id, fp, op, r_ctl, fh_type); + *did = FC_FID_MGMT_SERV; + break; case FC_FID_DIR_SERV: default: rc = fc_ct_ns_fill(lport, fc_id, fp, op, r_ctl, fh_type); diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 6a3922fe0be..8f9dfba3fcf 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -30,6 +30,7 @@ #include #include +#include #include #include @@ -52,6 +53,8 @@ * @LPORT_ST_RPN_ID: Register port name by ID (RPN_ID) sent * @LPORT_ST_RFT_ID: Register Fibre Channel types by ID (RFT_ID) sent * @LPORT_ST_RFF_ID: Register FC-4 Features by ID (RFF_ID) sent + * @LPORT_ST_FDMI: Waiting for mgmt server rport to become ready + * @LPORT_ST_RHBA: * @LPORT_ST_SCR: State Change Register (SCR) sent * @LPORT_ST_READY: Ready for use * @LPORT_ST_LOGO: Local port logout (LOGO) sent @@ -66,6 +69,11 @@ enum fc_lport_state { LPORT_ST_RSPN_ID, LPORT_ST_RFT_ID, LPORT_ST_RFF_ID, + LPORT_ST_FDMI, + LPORT_ST_RHBA, + LPORT_ST_RPA, + LPORT_ST_DHBA, + LPORT_ST_DPRT, LPORT_ST_SCR, LPORT_ST_READY, LPORT_ST_LOGO, @@ -797,6 +805,7 @@ enum fc_lport_event { * @host: The SCSI host associated with a local port * @ema_list: Exchange manager anchor list * @dns_rdata: The directory server remote port + * @ms_rdata: The management server remote port * @ptp_rdata: Point to point remote port * @scsi_priv: FCP layer internal data * @disc: Discovery context @@ -842,6 +851,7 @@ struct fc_lport { struct Scsi_Host *host; struct list_head ema_list; struct fc_rport_priv *dns_rdata; + struct fc_rport_priv *ms_rdata; struct fc_rport_priv *ptp_rdata; void *scsi_priv; struct fc_disc disc; @@ -877,6 +887,7 @@ struct fc_lport { u32 does_npiv:1; u32 npiv_enabled:1; u32 point_to_multipoint:1; + u32 fdmi_enabled:1; u32 mfs; u8 max_retry_count; u8 max_rport_retry_count; -- cgit v1.2.3-70-g09d2 From 6fef3902889ade6270a942cc2554252dbff1146c Mon Sep 17 00:00:00 2001 From: Neerav Parikh Date: Sun, 22 Jan 2012 17:30:10 -0800 Subject: [SCSI] fcoe: Add support for FDMI in fcoe This adds support for updating the FC-GS FDMI attributes in the fcoe driver. Signed-off-by: Neerav Parikh Tested-by: Ross Brattain Acked-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index e9599600aa2..b222e2dd5de 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -734,6 +734,85 @@ static int fcoe_shost_config(struct fc_lport *lport, struct device *dev) return 0; } + +/** + * fcoe_fdmi_info() - Get FDMI related info from net devive for SW FCoE + * @lport: The local port that is associated with the net device + * @netdev: The associated net device + * + * Must be called after fcoe_shost_config() as it will use local port mutex + * + */ +static void fcoe_fdmi_info(struct fc_lport *lport, struct net_device *netdev) +{ + struct fcoe_interface *fcoe; + struct fcoe_port *port; + struct net_device *realdev; + int rc; + struct netdev_fcoe_hbainfo fdmi; + + port = lport_priv(lport); + fcoe = port->priv; + realdev = fcoe->realdev; + + if (!realdev) + return; + + /* No FDMI state m/c for NPIV ports */ + if (lport->vport) + return; + + if (realdev->netdev_ops->ndo_fcoe_get_hbainfo) { + memset(&fdmi, 0, sizeof(fdmi)); + rc = realdev->netdev_ops->ndo_fcoe_get_hbainfo(realdev, + &fdmi); + if (rc) { + printk(KERN_INFO "fcoe: Failed to retrieve FDMI " + "information from netdev.\n"); + return; + } + + snprintf(fc_host_serial_number(lport->host), + FC_SERIAL_NUMBER_SIZE, + "%s", + fdmi.serial_number); + snprintf(fc_host_manufacturer(lport->host), + FC_SERIAL_NUMBER_SIZE, + "%s", + fdmi.manufacturer); + snprintf(fc_host_model(lport->host), + FC_SYMBOLIC_NAME_SIZE, + "%s", + fdmi.model); + snprintf(fc_host_model_description(lport->host), + FC_SYMBOLIC_NAME_SIZE, + "%s", + fdmi.model_description); + snprintf(fc_host_hardware_version(lport->host), + FC_VERSION_STRING_SIZE, + "%s", + fdmi.hardware_version); + snprintf(fc_host_driver_version(lport->host), + FC_VERSION_STRING_SIZE, + "%s", + fdmi.driver_version); + snprintf(fc_host_optionrom_version(lport->host), + FC_VERSION_STRING_SIZE, + "%s", + fdmi.optionrom_version); + snprintf(fc_host_firmware_version(lport->host), + FC_VERSION_STRING_SIZE, + "%s", + fdmi.firmware_version); + + /* Enable FDMI lport states */ + lport->fdmi_enabled = 1; + } else { + lport->fdmi_enabled = 0; + printk(KERN_INFO "fcoe: No FDMI support.\n"); + } +} + /** * fcoe_oem_match() - The match routine for the offloaded exchange manager * @fp: The I/O frame @@ -1047,6 +1126,9 @@ static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe, goto out_lp_destroy; } + /* Initialized FDMI information */ + fcoe_fdmi_info(lport, netdev); + /* * fcoe_em_alloc() and fcoe_hostlist_add() both * need to be atomic with respect to other changes to the -- cgit v1.2.3-70-g09d2 From 9f71af2febd53620a379d71527f98bbc2ba67e61 Mon Sep 17 00:00:00 2001 From: Neerav Parikh Date: Sun, 22 Jan 2012 17:30:16 -0800 Subject: [SCSI] fcoe: Allow exposing FDMI attributes via sysfs Allow FDMI attributes to be exposed via the fc_host class object for the fcoe driver. Signed-off-by: Neerav Parikh Tested-by: Ross Brattain Acked-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index b222e2dd5de..5e77f23423d 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -168,6 +168,14 @@ static struct fc_function_template fcoe_nport_fc_functions = { .show_host_supported_fc4s = 1, .show_host_active_fc4s = 1, .show_host_maxframe_size = 1, + .show_host_serial_number = 1, + .show_host_manufacturer = 1, + .show_host_model = 1, + .show_host_model_description = 1, + .show_host_hardware_version = 1, + .show_host_driver_version = 1, + .show_host_firmware_version = 1, + .show_host_optionrom_version = 1, .show_host_port_id = 1, .show_host_supported_speeds = 1, -- cgit v1.2.3-70-g09d2 From 2a7b29c5f267c143e280c1a5174a0d930bd6c1e3 Mon Sep 17 00:00:00 2001 From: Bhanu Prakash Gollapudi Date: Mon, 23 Jan 2012 18:00:46 -0800 Subject: [SCSI] bnx2fc: fix panic in bnx2fc_post_io_req System panics while accessing stale pointer - timer_work_queue - in the IO path before bnx2fc_stop is called. Fix is to destroy the workqueue after the destroy operation is complete. Signed-off-by: Bhanu Prakash Gollapudi Signed-off-by: James Bottomley --- drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index 8c6156a10d9..10cf5d96ce2 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -1537,6 +1537,7 @@ static void __bnx2fc_destroy(struct bnx2fc_interface *interface) static int bnx2fc_destroy(struct net_device *netdev) { struct bnx2fc_interface *interface = NULL; + struct workqueue_struct *timer_work_queue; int rc = 0; rtnl_lock(); @@ -1549,9 +1550,9 @@ static int bnx2fc_destroy(struct net_device *netdev) goto netdev_err; } - - destroy_workqueue(interface->timer_work_queue); + timer_work_queue = interface->timer_work_queue; __bnx2fc_destroy(interface); + destroy_workqueue(timer_work_queue); netdev_err: mutex_unlock(&bnx2fc_dev_lock); -- cgit v1.2.3-70-g09d2 From 44c570b5b09d1d1cc3167834f89f754f1bc5ac14 Mon Sep 17 00:00:00 2001 From: Bhanu Prakash Gollapudi Date: Mon, 23 Jan 2012 18:00:47 -0800 Subject: [SCSI] bnx2fc: Handle LOGO flooding from the target Host drops sessions when flood of unsolicited LOGOs are received from the target. Because of unsufficient PLOGI retries, upon exceeding the retry count of 3, the target sessions are dropped. Increased the retry count to 255 to allow sufficient retries in this scenario. Signed-off-by: Bhanu Prakash Gollapudi Signed-off-by: James Bottomley --- drivers/scsi/bnx2fc/bnx2fc.h | 2 ++ drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h index 049ea907e04..c5af098e3b5 100644 --- a/drivers/scsi/bnx2fc/bnx2fc.h +++ b/drivers/scsi/bnx2fc/bnx2fc.h @@ -114,6 +114,8 @@ #define BNX2FC_HASH_TBL_CHUNK_SIZE (16 * 1024) #define BNX2FC_MAX_SEQS 255 +#define BNX2FC_MAX_RETRY_CNT 3 +#define BNX2FC_MAX_RPORT_RETRY_CNT 255 #define BNX2FC_READ (1 << 1) #define BNX2FC_WRITE (1 << 0) diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index 10cf5d96ce2..bd18ab5ccba 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -953,8 +953,8 @@ static int bnx2fc_lport_config(struct fc_lport *lport) { lport->link_up = 0; lport->qfull = 0; - lport->max_retry_count = 3; - lport->max_rport_retry_count = 3; + lport->max_retry_count = BNX2FC_MAX_RETRY_CNT; + lport->max_rport_retry_count = BNX2FC_MAX_RPORT_RETRY_CNT; lport->e_d_tov = 2 * 1000; lport->r_a_tov = 10 * 1000; -- cgit v1.2.3-70-g09d2 From 7d742f659e00f08016a4446a9134036e47f9a0cf Mon Sep 17 00:00:00 2001 From: Bhanu Prakash Gollapudi Date: Mon, 23 Jan 2012 18:00:48 -0800 Subject: [SCSI] bnx2fc: NPIV ports go offline when interface is brought down & up When there are 255 NPIV ports, and the interface is brought down & up, both physical and NPIV ports are logged off and never logged back in. Since discovery happens on single CPU, XID resources on that CPU will be limited, which when exhausted the discovery fails. Increase the XID resource range to ensure that the discovery completes successfully. Also ensure that fc_exch_mgr_alloc() doesn't fail on the system that has lower number of CPUs. Signed-off-by: Bhanu Prakash Gollapudi Signed-off-by: James Bottomley --- drivers/scsi/bnx2fc/bnx2fc.h | 4 +++- drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 9 ++++++++- 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h index c5af098e3b5..aa8576f3694 100644 --- a/drivers/scsi/bnx2fc/bnx2fc.h +++ b/drivers/scsi/bnx2fc/bnx2fc.h @@ -123,8 +123,10 @@ #define BNX2FC_MIN_XID 0 #define BNX2FC_MAX_XID \ (BNX2FC_MAX_OUTSTANDING_CMNDS + BNX2FC_ELSTM_XIDS - 1) +#define FCOE_MAX_NUM_XIDS 0x2000 #define FCOE_MIN_XID (BNX2FC_MAX_XID + 1) -#define FCOE_MAX_XID (FCOE_MIN_XID + 4095) +#define FCOE_MAX_XID (FCOE_MIN_XID + FCOE_MAX_NUM_XIDS - 1) +#define FCOE_XIDS_PER_CPU (FCOE_MIN_XID + (512 * nr_cpu_ids) - 1) #define BNX2FC_MAX_LUN 0xFFFF #define BNX2FC_MAX_FCP_TGT 256 #define BNX2FC_MAX_CMD_LEN 16 diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index bd18ab5ccba..0766b93ebd9 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -940,8 +940,14 @@ static int bnx2fc_libfc_config(struct fc_lport *lport) static int bnx2fc_em_config(struct fc_lport *lport) { + int max_xid; + + if (nr_cpu_ids <= 2) + max_xid = FCOE_XIDS_PER_CPU; + else + max_xid = FCOE_MAX_XID; if (!fc_exch_mgr_alloc(lport, FC_CLASS_3, FCOE_MIN_XID, - FCOE_MAX_XID, NULL)) { + max_xid, NULL)) { printk(KERN_ERR PFX "em_config:fc_exch_mgr_alloc failed\n"); return -ENOMEM; } @@ -2056,6 +2062,7 @@ if_create_err: ifput_err: bnx2fc_net_cleanup(interface); bnx2fc_interface_put(interface); + goto mod_err; netdev_err: module_put(THIS_MODULE); mod_err: -- cgit v1.2.3-70-g09d2 From 98788a134979fe66c32a1393adf66f7d3faf16ea Mon Sep 17 00:00:00 2001 From: Bhanu Prakash Gollapudi Date: Mon, 23 Jan 2012 18:00:49 -0800 Subject: [SCSI] bnx2fc: Bumped version to 1.0.10 Signed-off-by: Bhanu Prakash Gollapudi Signed-off-by: James Bottomley --- drivers/scsi/bnx2fc/bnx2fc.h | 2 +- drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h index aa8576f3694..a4953ef9e53 100644 --- a/drivers/scsi/bnx2fc/bnx2fc.h +++ b/drivers/scsi/bnx2fc/bnx2fc.h @@ -62,7 +62,7 @@ #include "bnx2fc_constants.h" #define BNX2FC_NAME "bnx2fc" -#define BNX2FC_VERSION "1.0.9" +#define BNX2FC_VERSION "1.0.10" #define PFX "bnx2fc: " diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index 0766b93ebd9..796fd3090ed 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -22,7 +22,7 @@ DEFINE_PER_CPU(struct bnx2fc_percpu_s, bnx2fc_percpu); #define DRV_MODULE_NAME "bnx2fc" #define DRV_MODULE_VERSION BNX2FC_VERSION -#define DRV_MODULE_RELDATE "Oct 21, 2011" +#define DRV_MODULE_RELDATE "Jan 22, 2011" static char version[] __devinitdata = -- cgit v1.2.3-70-g09d2 From 3384db9eb8b1e4f94a02c2a0ce3c0efe6142f3ba Mon Sep 17 00:00:00 2001 From: "Moger, Babu" Date: Tue, 24 Jan 2012 20:38:42 +0000 Subject: [SCSI] Correctly set the scsi host/msg/status bytes Resubmitting as my previous post had format issues and did not go llinux-scsi. This patch changes the function to set_msg_byte, set_host_byte and set_driver_byte to correctly set the corresponding bytes appropriately. It will reset the original setting and correctly set it to the new value. The previous OR operation does not always set it back to new value. Look at patch 2/2 for an example. Signed-off-by: Babu Moger Signed-off-by: James Bottomley --- include/scsi/scsi_cmnd.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index a5e885a111d..9be0128bf30 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -289,17 +289,17 @@ static inline struct scsi_data_buffer *scsi_prot(struct scsi_cmnd *cmd) static inline void set_msg_byte(struct scsi_cmnd *cmd, char status) { - cmd->result |= status << 8; + cmd->result = (cmd->result & 0xffff00ff) | (status << 8); } static inline void set_host_byte(struct scsi_cmnd *cmd, char status) { - cmd->result |= status << 16; + cmd->result = (cmd->result & 0xff00ffff) | (status << 16); } static inline void set_driver_byte(struct scsi_cmnd *cmd, char status) { - cmd->result |= status << 24; + cmd->result = (cmd->result & 0x00ffffff) | (status << 24); } #endif /* _SCSI_SCSI_CMND_H */ -- cgit v1.2.3-70-g09d2 From 2082ebc45af9c9c648383b8cde0dc1948eadbf31 Mon Sep 17 00:00:00 2001 From: "Moger, Babu" Date: Tue, 24 Jan 2012 20:38:46 +0000 Subject: [SCSI] fix the new host byte settings (DID_TARGET_FAILURE and DID_NEXUS_FAILURE) This patch fixes the host byte settings DID_TARGET_FAILURE and DID_NEXUS_FAILURE. The function __scsi_error_from_host_byte, tries to reset the host byte to DID_OK. But that does not happen because of the OR operation. Here is the flow. scsi_softirq_done-> scsi_decide_disposition -> __scsi_error_from_host_byte Let's take an example with DID_NEXUS_FAILURE. In scsi_decide_disposition, result will be set as DID_NEXUS_FAILURE (=0x11). Then in __scsi_error_from_host_byte, when we do OR with DID_OK. Purpose is to reset it back to DID_OK. But that does not happen. This patch fixes this issue. Signed-off-by: Babu Moger Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 4 ++-- drivers/scsi/scsi_lib.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 5f84a148eb1..6ae3b5dbd37 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1540,7 +1540,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) * Need to modify host byte to signal a * permanent target failure */ - scmd->result |= (DID_TARGET_FAILURE << 16); + set_host_byte(scmd, DID_TARGET_FAILURE); rtn = SUCCESS; } /* if rtn == FAILED, we have no sense information; @@ -1560,7 +1560,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd) case RESERVATION_CONFLICT: sdev_printk(KERN_INFO, scmd->device, "reservation conflict\n"); - scmd->result |= (DID_NEXUS_FAILURE << 16); + set_host_byte(scmd, DID_NEXUS_FAILURE); return SUCCESS; /* causes immediate i/o error */ default: return FAILED; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index b2c95dbe9d6..5b770e9e82c 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -682,11 +682,11 @@ static int __scsi_error_from_host_byte(struct scsi_cmnd *cmd, int result) error = -ENOLINK; break; case DID_TARGET_FAILURE: - cmd->result |= (DID_OK << 16); + set_host_byte(cmd, DID_OK); error = -EREMOTEIO; break; case DID_NEXUS_FAILURE: - cmd->result |= (DID_OK << 16); + set_host_byte(cmd, DID_OK); error = -EBADE; break; default: -- cgit v1.2.3-70-g09d2 From 46a7c17d26967922092f3a8291815ffb20f6cabe Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Wed, 25 Jan 2012 22:16:16 -0500 Subject: [SCSI] iscsi: don't hang in endless loop if no targets present iscsi_if_send_reply() may return -ESRCH if there were no targets to send data to. Currently we're ignoring this value and looping in attempt to do it over and over, which will usually lead in a hung task like this one: [ 4920.817298] INFO: task trinity:9074 blocked for more than 120 seconds. [ 4920.818527] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 4920.819982] trinity D 0000000000000000 5504 9074 2756 0x00000004 [ 4920.825374] ffff880003961a98 0000000000000086 ffff8800001aa000 ffff8800001aa000 [ 4920.826791] 00000000001d4340 ffff880003961fd8 ffff880003960000 00000000001d4340 [ 4920.828241] 00000000001d4340 00000000001d4340 ffff880003961fd8 00000000001d4340 [ 4920.833231] [ 4920.833519] Call Trace: [ 4920.834010] [] schedule+0x3a/0x50 [ 4920.834953] [] __mutex_lock_common+0x209/0x5b0 [ 4920.836226] [] ? iscsi_if_rx+0x2d/0x990 [ 4920.837281] [] ? sched_clock+0x13/0x20 [ 4920.838305] [] ? iscsi_if_rx+0x2d/0x990 [ 4920.839336] [] mutex_lock_nested+0x40/0x50 [ 4920.840423] [] iscsi_if_rx+0x2d/0x990 [ 4920.841434] [] ? sub_preempt_count+0x9d/0xd0 [ 4920.842548] [] ? _raw_read_unlock+0x30/0x60 [ 4920.843666] [] netlink_unicast+0x1ae/0x1f0 [ 4920.844751] [] netlink_sendmsg+0x227/0x350 [ 4920.845850] [] ? sock_update_netprioidx+0xdd/0x1b0 [ 4920.847060] [] ? sock_update_netprioidx+0x52/0x1b0 [ 4920.848276] [] sock_aio_write+0x166/0x180 [ 4920.849348] [] ? get_parent_ip+0x11/0x50 [ 4920.850428] [] do_sync_write+0xda/0x120 [ 4920.851465] [] ? sub_preempt_count+0x9d/0xd0 [ 4920.852579] [] ? get_parent_ip+0x11/0x50 [ 4920.853608] [] ? security_file_permission+0x27/0xb0 [ 4920.854821] [] vfs_write+0x16c/0x180 [ 4920.855781] [] sys_write+0x4f/0xa0 [ 4920.856798] [] system_call_fastpath+0x16/0x1b [ 4920.877487] 1 lock held by trinity/9074: [ 4920.878239] #0: (rx_queue_mutex){+.+...}, at: [] iscsi_if_rx+0x2d/0x990 [ 4920.880005] Kernel panic - not syncing: hung_task: blocked tasks Signed-off-by: Sasha Levin Acked-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_iscsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 97832a2876b..460d6852183 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -2110,7 +2110,7 @@ iscsi_if_rx(struct sk_buff *skb) break; err = iscsi_if_send_reply(group, nlh->nlmsg_seq, nlh->nlmsg_type, 0, 0, ev, sizeof(*ev)); - } while (err < 0 && err != -ECONNREFUSED); + } while (err < 0 && err != -ECONNREFUSED && err != -ESRCH); skb_pull(skb, rlen); } mutex_unlock(&rx_queue_mutex); -- cgit v1.2.3-70-g09d2 From df1c7baba1b7b3053950f3845a6575aca47ba9ce Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 26 Jan 2012 21:13:09 -0600 Subject: [SCSI] iscsi: fix setting of pid from netlink skb NETLINK_CREDS's pid now returns 0, so I guess we are supposed to be using NETLINK_CB. This changed while the patch to export the pid was getting merged upstream, so it was not noticed until both the network and iscsi changes were in the same tree. Signed-off-by: Mike Christie Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_iscsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 460d6852183..787044828a7 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -1941,7 +1941,7 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group) switch (nlh->nlmsg_type) { case ISCSI_UEVENT_CREATE_SESSION: err = iscsi_if_create_session(priv, ep, ev, - NETLINK_CREDS(skb)->pid, + NETLINK_CB(skb).pid, ev->u.c_session.initial_cmdsn, ev->u.c_session.cmds_max, ev->u.c_session.queue_depth); @@ -1954,7 +1954,7 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group) } err = iscsi_if_create_session(priv, ep, ev, - NETLINK_CREDS(skb)->pid, + NETLINK_CB(skb).pid, ev->u.c_bound_session.initial_cmdsn, ev->u.c_bound_session.cmds_max, ev->u.c_bound_session.queue_depth); -- cgit v1.2.3-70-g09d2 From 1304be5fe0efb42b7ec6a50dd8e1a9bce2adae17 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 26 Jan 2012 21:13:10 -0600 Subject: [SCSI] libiscsi_tcp: fix max_r2t manipulation Problem description from Xi Wang: A large max_r2t could lead to integer overflow in subsequent call to iscsi_tcp_r2tpool_alloc(), allocating a smaller buffer than expected and leading to out-of-bounds write. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/cxgbi/libcxgbi.c | 13 ++----------- drivers/scsi/iscsi_tcp.c | 13 +------------ drivers/scsi/libiscsi.c | 2 +- drivers/scsi/libiscsi_tcp.c | 18 ++++++++++++++++++ include/scsi/libiscsi.h | 2 +- include/scsi/libiscsi_tcp.h | 2 +- 6 files changed, 24 insertions(+), 26 deletions(-) diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c index d3ff9cd4023..e6e6aa9289b 100644 --- a/drivers/scsi/cxgbi/libcxgbi.c +++ b/drivers/scsi/cxgbi/libcxgbi.c @@ -2148,11 +2148,10 @@ int cxgbi_set_conn_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param, char *buf, int buflen) { struct iscsi_conn *conn = cls_conn->dd_data; - struct iscsi_session *session = conn->session; struct iscsi_tcp_conn *tcp_conn = conn->dd_data; struct cxgbi_conn *cconn = tcp_conn->dd_data; struct cxgbi_sock *csk = cconn->cep->csk; - int value, err = 0; + int err; log_debug(1 << CXGBI_DBG_ISCSI, "cls_conn 0x%p, param %d, buf(%d) %s.\n", @@ -2174,15 +2173,7 @@ int cxgbi_set_conn_param(struct iscsi_cls_conn *cls_conn, conn->datadgst_en, 0); break; case ISCSI_PARAM_MAX_R2T: - sscanf(buf, "%d", &value); - if (value <= 0 || !is_power_of_2(value)) - return -EINVAL; - if (session->max_r2t == value) - break; - iscsi_tcp_r2tpool_free(session); - err = iscsi_set_param(cls_conn, param, buf, buflen); - if (!err && iscsi_tcp_r2tpool_alloc(session)) - return -ENOMEM; + return iscsi_tcp_set_max_r2t(conn, buf); case ISCSI_PARAM_MAX_RECV_DLENGTH: err = iscsi_set_param(cls_conn, param, buf, buflen); if (!err) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index db47158e0dd..453a740fa68 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -684,10 +684,8 @@ static int iscsi_sw_tcp_conn_set_param(struct iscsi_cls_conn *cls_conn, int buflen) { struct iscsi_conn *conn = cls_conn->dd_data; - struct iscsi_session *session = conn->session; struct iscsi_tcp_conn *tcp_conn = conn->dd_data; struct iscsi_sw_tcp_conn *tcp_sw_conn = tcp_conn->dd_data; - int value; switch(param) { case ISCSI_PARAM_HDRDGST_EN: @@ -699,16 +697,7 @@ static int iscsi_sw_tcp_conn_set_param(struct iscsi_cls_conn *cls_conn, sock_no_sendpage : tcp_sw_conn->sock->ops->sendpage; break; case ISCSI_PARAM_MAX_R2T: - sscanf(buf, "%d", &value); - if (value <= 0 || !is_power_of_2(value)) - return -EINVAL; - if (session->max_r2t == value) - break; - iscsi_tcp_r2tpool_free(session); - iscsi_set_param(cls_conn, param, buf, buflen); - if (iscsi_tcp_r2tpool_alloc(session)) - return -ENOMEM; - break; + return iscsi_tcp_set_max_r2t(conn, buf); default: return iscsi_set_param(cls_conn, param, buf, buflen); } diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 00592e3bb37..8582d7c2573 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -3201,7 +3201,7 @@ int iscsi_set_param(struct iscsi_cls_conn *cls_conn, sscanf(buf, "%d", &session->initial_r2t_en); break; case ISCSI_PARAM_MAX_R2T: - sscanf(buf, "%d", &session->max_r2t); + sscanf(buf, "%hu", &session->max_r2t); break; case ISCSI_PARAM_IMM_DATA_EN: sscanf(buf, "%d", &session->imm_data_en); diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c index 5715a3d0a3d..c4996b08199 100644 --- a/drivers/scsi/libiscsi_tcp.c +++ b/drivers/scsi/libiscsi_tcp.c @@ -1170,6 +1170,24 @@ void iscsi_tcp_r2tpool_free(struct iscsi_session *session) } EXPORT_SYMBOL_GPL(iscsi_tcp_r2tpool_free); +int iscsi_tcp_set_max_r2t(struct iscsi_conn *conn, char *buf) +{ + struct iscsi_session *session = conn->session; + unsigned short r2ts = 0; + + sscanf(buf, "%hu", &r2ts); + if (session->max_r2t == r2ts) + return 0; + + if (!r2ts || !is_power_of_2(r2ts)) + return -EINVAL; + + session->max_r2t = r2ts; + iscsi_tcp_r2tpool_free(session); + return iscsi_tcp_r2tpool_alloc(session); +} +EXPORT_SYMBOL_GPL(iscsi_tcp_set_max_r2t); + void iscsi_tcp_conn_get_stats(struct iscsi_cls_conn *cls_conn, struct iscsi_stats *stats) { diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 2e42e9a0e0b..6e33386a389 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -268,7 +268,7 @@ struct iscsi_session { int lu_reset_timeout; int tgt_reset_timeout; int initial_r2t_en; - unsigned max_r2t; + unsigned short max_r2t; int imm_data_en; unsigned first_burst; unsigned max_burst; diff --git a/include/scsi/libiscsi_tcp.h b/include/scsi/libiscsi_tcp.h index ac0cc1d925e..215469a9b80 100644 --- a/include/scsi/libiscsi_tcp.h +++ b/include/scsi/libiscsi_tcp.h @@ -128,7 +128,7 @@ extern void iscsi_tcp_conn_teardown(struct iscsi_cls_conn *cls_conn); /* misc helpers */ extern int iscsi_tcp_r2tpool_alloc(struct iscsi_session *session); extern void iscsi_tcp_r2tpool_free(struct iscsi_session *session); - +extern int iscsi_tcp_set_max_r2t(struct iscsi_conn *conn, char *buf); extern void iscsi_tcp_conn_get_stats(struct iscsi_cls_conn *cls_conn, struct iscsi_stats *stats); #endif /* LIBISCSI_TCP_H */ -- cgit v1.2.3-70-g09d2 From e3d338a536330b5ffc9f28d7c6a4cdf6ba51867a Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 26 Jan 2012 21:13:11 -0600 Subject: [SCSI] libiscsi: fix cmd timeout/completion race If the driver/lib has called scsi_done and cleaned up internally but scsi layer has not yet called blk_mark_rq_complete when the command times out we hit a problem if the timeout code calls blk_mark_rq_complete first. When the time out code calls into the driver we were returning BLK_EH_RESET_TIMER and that causes the timeout code to just call us again later. We need to be calling BLK_EH_HANDLED so the timeout code can complete the completion process because it had called blk_mark_rq_complete on the command and now owns its processing. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/libiscsi.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 8582d7c2573..82c3fd4bc93 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1909,6 +1909,16 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) ISCSI_DBG_EH(session, "scsi cmd %p timedout\n", sc); spin_lock(&session->lock); + task = (struct iscsi_task *)sc->SCp.ptr; + if (!task) { + /* + * Raced with completion. Blk layer has taken ownership + * so let timeout code complete it now. + */ + rc = BLK_EH_HANDLED; + goto done; + } + if (session->state != ISCSI_STATE_LOGGED_IN) { /* * We are probably in the middle of iscsi recovery so let @@ -1925,16 +1935,6 @@ static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) goto done; } - task = (struct iscsi_task *)sc->SCp.ptr; - if (!task) { - /* - * Raced with completion. Just reset timer, and let it - * complete normally - */ - rc = BLK_EH_RESET_TIMER; - goto done; - } - /* * If we have sent (at least queued to the network layer) a pdu or * recvd one for the task since the last timeout ask for -- cgit v1.2.3-70-g09d2 From e5cc6aa4b6ef34c3f054af8c61a4f73c157589c3 Mon Sep 17 00:00:00 2001 From: Marcin Tomczak Date: Fri, 27 Jan 2012 11:14:50 -0800 Subject: [SCSI] isci: enable clock gating Enabling clock gating for power savings on entry to controller ready state. Disable SCU clock gating for power savings on exit from the controller ready state. The gating is fully automated by silicon after setting the mode. Signed-off-by: Marcin Tomczak Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/host.c | 9 +++++++++ drivers/scsi/isci/registers.h | 27 +++++++++++++++++++++++++-- 2 files changed, 34 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 418391b1c36..508aa8ce25b 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1491,6 +1491,15 @@ sci_controller_set_interrupt_coalescence(struct isci_host *ihost, static void sci_controller_ready_state_enter(struct sci_base_state_machine *sm) { struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); + u32 val; + + /* enable clock gating for power control of the scu unit */ + val = readl(&ihost->smu_registers->clock_gating_control); + val &= ~(SMU_CGUCR_GEN_BIT(REGCLK_ENABLE) | + SMU_CGUCR_GEN_BIT(TXCLK_ENABLE) | + SMU_CGUCR_GEN_BIT(XCLK_ENABLE)); + val |= SMU_CGUCR_GEN_BIT(IDLE_ENABLE); + writel(val, &ihost->smu_registers->clock_gating_control); /* set the default interrupt coalescence number and timeout value. */ sci_controller_set_interrupt_coalescence(ihost, 0, 0); diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h index eaa541afc75..7eb0ccd45fe 100644 --- a/drivers/scsi/isci/registers.h +++ b/drivers/scsi/isci/registers.h @@ -370,6 +370,27 @@ struct scu_iit_entry { >> SMU_DEVICE_CONTEXT_CAPACITY_MAX_RNC_SHIFT \ ) +/* ***************************************************************************** */ +#define SMU_CLOCK_GATING_CONTROL_IDLE_ENABLE_SHIFT (0) +#define SMU_CLOCK_GATING_CONTROL_IDLE_ENABLE_MASK (0x00000001) +#define SMU_CLOCK_GATING_CONTROL_XCLK_ENABLE_SHIFT (1) +#define SMU_CLOCK_GATING_CONTROL_XCLK_ENABLE_MASK (0x00000002) +#define SMU_CLOCK_GATING_CONTROL_TXCLK_ENABLE_SHIFT (2) +#define SMU_CLOCK_GATING_CONTROL_TXCLK_ENABLE_MASK (0x00000004) +#define SMU_CLOCK_GATING_CONTROL_REGCLK_ENABLE_SHIFT (3) +#define SMU_CLOCK_GATING_CONTROL_REGCLK_ENABLE_MASK (0x00000008) +#define SMU_CLOCK_GATING_CONTROL_IDLE_TIMEOUT_SHIFT (16) +#define SMU_CLOCK_GATING_CONTROL_IDLE_TIMEOUT_MASK (0x000F0000) +#define SMU_CLOCK_GATING_CONTROL_FORCE_IDLE_SHIFT (31) +#define SMU_CLOCK_GATING_CONTROL_FORCE_IDLE_MASK (0x80000000) +#define SMU_CLOCK_GATING_CONTROL_RESERVED_MASK (0x7FF0FFF0) + +#define SMU_CGUCR_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SMU_CLOCK_GATING_CONTROL_##name, value) + +#define SMU_CGUCR_GEN_BIT(name) \ + SCU_GEN_BIT(SMU_CLOCK_GATING_CONTROL_##name) + /* -------------------------------------------------------------------------- */ #define SMU_CONTROL_STATUS_TASK_CONTEXT_RANGE_ENABLE_SHIFT (0) @@ -992,8 +1013,10 @@ struct smu_registers { u32 mmr_address_window; /* 0x00A4 SMDW */ u32 mmr_data_window; - u32 reserved_A8; - u32 reserved_AC; +/* 0x00A8 CGUCR */ + u32 clock_gating_control; +/* 0x00AC CGUPC */ + u32 clock_gating_performance; /* A whole bunch of reserved space */ u32 reserved_Bx[4]; u32 reserved_Cx[4]; -- cgit v1.2.3-70-g09d2 From 64b8aa75bc101eb73e2c76a66fb5432b4c83ffb2 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sat, 28 Jan 2012 00:23:41 +0100 Subject: [SCSI] bfa: don't leak mem in bfad_im_bsg_els_ct_request() If 'drv_fcxp = kzalloc(sizeof(struct bfad_fcxp), GFP_KERNEL);' fails and returns NULL, then we'll leak the memory allocated to 'bsg_fcpt' when we jump to 'out:' and the variable subsequently goes out of scope. Also remove the cast of the kzalloc() return value. kzalloc() returns a void* which is implicitly converted, so the explicit cast is pointless. Signed-off-by: Jesper Juhl Acked-by: Krishna Gudipati Signed-off-by: James Bottomley --- drivers/scsi/bfa/bfad_bsg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/bfa/bfad_bsg.c b/drivers/scsi/bfa/bfad_bsg.c index 530de2b1200..8005c6c5a08 100644 --- a/drivers/scsi/bfa/bfad_bsg.c +++ b/drivers/scsi/bfa/bfad_bsg.c @@ -3047,8 +3047,7 @@ bfad_im_bsg_els_ct_request(struct fc_bsg_job *job) * Allocate buffer for bsg_fcpt and do a copy_from_user op for payload * buffer of size bsg_data->payload_len */ - bsg_fcpt = (struct bfa_bsg_fcpt_s *) - kzalloc(bsg_data->payload_len, GFP_KERNEL); + bsg_fcpt = kzalloc(bsg_data->payload_len, GFP_KERNEL); if (!bsg_fcpt) goto out; @@ -3060,6 +3059,7 @@ bfad_im_bsg_els_ct_request(struct fc_bsg_job *job) drv_fcxp = kzalloc(sizeof(struct bfad_fcxp), GFP_KERNEL); if (drv_fcxp == NULL) { + kfree(bsg_fcpt); rc = -ENOMEM; goto out; } -- cgit v1.2.3-70-g09d2 From 1ec90174bdb4d8798299aebdcc078c3ac7e2e2c4 Mon Sep 17 00:00:00 2001 From: Jing Huang Date: Fri, 27 Jan 2012 16:51:51 -0800 Subject: [SCSI] bfa: add readme file This patch add bfa driver readme file to Documentation/scsi Signed-off-by: Jing Huang Signed-off-by: James Bottomley --- Documentation/scsi/bfa.txt | 82 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 Documentation/scsi/bfa.txt diff --git a/Documentation/scsi/bfa.txt b/Documentation/scsi/bfa.txt new file mode 100644 index 00000000000..f2d6e9d1791 --- /dev/null +++ b/Documentation/scsi/bfa.txt @@ -0,0 +1,82 @@ +Linux driver for Brocade FC/FCOE adapters + + +Supported Hardware +------------------ + +bfa 3.0.2.2 driver supports all Brocade FC/FCOE adapters. Below is a list of +adapter models with corresponding PCIIDs. + + PCIID Model + + 1657:0013:1657:0014 425 4Gbps dual port FC HBA + 1657:0013:1657:0014 825 8Gbps PCIe dual port FC HBA + 1657:0013:103c:1742 HP 82B 8Gbps PCIedual port FC HBA + 1657:0013:103c:1744 HP 42B 4Gbps dual port FC HBA + 1657:0017:1657:0014 415 4Gbps single port FC HBA + 1657:0017:1657:0014 815 8Gbps single port FC HBA + 1657:0017:103c:1741 HP 41B 4Gbps single port FC HBA + 1657:0017:103c 1743 HP 81B 8Gbps single port FC HBA + 1657:0021:103c:1779 804 8Gbps FC HBA for HP Bladesystem c-class + + 1657:0014:1657:0014 1010 10Gbps single port CNA - FCOE + 1657:0014:1657:0014 1020 10Gbps dual port CNA - FCOE + 1657:0014:1657:0014 1007 10Gbps dual port CNA - FCOE + 1657:0014:1657:0014 1741 10Gbps dual port CNA - FCOE + + 1657:0022:1657:0024 1860 16Gbps FC HBA + 1657:0022:1657:0022 1860 10Gbps CNA - FCOE + + +Firmware download +----------------- + +The latest Firmware package for 3.0.2.2 bfa driver can be found at: + +http://www.brocade.com/services-support/drivers-downloads/adapters/Linux.page + +and then click following respective util package link: + + Version Link + + v3.0.0.0 Linux Adapter Firmware package for RHEL 6.2, SLES 11SP2 + + +Configuration & Management utility download +------------------------------------------- + +The latest driver configuration & management utility for 3.0.2.2 bfa driver can +be found at: + +http://www.brocade.com/services-support/drivers-downloads/adapters/Linux.page + +and then click following respective util pacakge link + + Version Link + + v3.0.2.0 Linux Adapter Firmware package for RHEL 6.2, SLES 11SP2 + + +Documentation +------------- + +The latest Administration's Guide, Installation and Reference Manual, +Troubleshooting Guide, and Release Notes for the corresponding out-of-box +driver can be found at: + +http://www.brocade.com/services-support/drivers-downloads/adapters/Linux.page + +and use the following inbox and out-of-box driver version mapping to find +the corresponding documentation: + + Inbox Version Out-of-box Version + + v3.0.2.2 v3.0.0.0 + + +Support +------- + +For general product and support info, go to the Brocade website at: + +http://www.brocade.com/services-support/index.page -- cgit v1.2.3-70-g09d2 From 93713f3bf1d74c57ff851d17de54bb273d94210c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 2 Feb 2012 14:03:22 +0100 Subject: [SCSI] bnx2i: use kthread_create_on_node() bnx2i_percpu_thread_create() create per cpu kthread, and should use proper NUMA aware API. Signed-off-by: Eric Dumazet Acked-by: Eddie Wai Signed-off-by: James Bottomley --- drivers/scsi/bnx2i/bnx2i_init.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index 1a947f1b972..62c8c0a02a7 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -393,8 +393,9 @@ static void bnx2i_percpu_thread_create(unsigned int cpu) p = &per_cpu(bnx2i_percpu, cpu); - thread = kthread_create(bnx2i_percpu_io_thread, (void *)p, - "bnx2i_thread/%d", cpu); + thread = kthread_create_on_node(bnx2i_percpu_io_thread, (void *)p, + cpu_to_node(cpu), + "bnx2i_thread/%d", cpu); /* bind thread to the cpu */ if (likely(!IS_ERR(thread))) { kthread_bind(thread, cpu); -- cgit v1.2.3-70-g09d2 From 70fc872c738d1e0af7d0420047e4ca3acf283c9d Mon Sep 17 00:00:00 2001 From: Eddie Wai Date: Thu, 2 Feb 2012 15:22:00 -0800 Subject: [SCSI] bnx2i: Fixed the override of the error_mask module param The error_mask module param overrides has a bug which prevented the new module param values to take effect. Also changed the type attribute of the error_mask1/2 module params from int to uint to allow the MSB to be set. Signed-off-by: Eddie Wai Acked-by: Anil Veerabhadrappa Signed-off-by: James Bottomley --- drivers/scsi/bnx2i/bnx2i_hwi.c | 12 ++++++++---- drivers/scsi/bnx2i/bnx2i_init.c | 4 ++-- 2 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 1ad0b822556..f9d6f412909 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -1312,14 +1312,18 @@ int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba) ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN) | /* EMC */ (1ULL << ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN)); - if (error_mask1) + if (error_mask1) { iscsi_init2.error_bit_map[0] = error_mask1; - else + mask64 &= (u32)(~mask64); + mask64 |= error_mask1; + } else iscsi_init2.error_bit_map[0] = (u32) mask64; - if (error_mask2) + if (error_mask2) { iscsi_init2.error_bit_map[1] = error_mask2; - else + mask64 &= 0xffffffff; + mask64 |= ((u64)error_mask2 << 32); + } else iscsi_init2.error_bit_map[1] = (u32) (mask64 >> 32); iscsi_error_mask = mask64; diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index 62c8c0a02a7..4927cca733d 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -49,11 +49,11 @@ module_param(en_tcp_dack, int, 0664); MODULE_PARM_DESC(en_tcp_dack, "Enable TCP Delayed ACK"); unsigned int error_mask1 = 0x00; -module_param(error_mask1, int, 0664); +module_param(error_mask1, uint, 0664); MODULE_PARM_DESC(error_mask1, "Config FW iSCSI Error Mask #1"); unsigned int error_mask2 = 0x00; -module_param(error_mask2, int, 0664); +module_param(error_mask2, uint, 0664); MODULE_PARM_DESC(error_mask2, "Config FW iSCSI Error Mask #2"); unsigned int sq_size; -- cgit v1.2.3-70-g09d2 From 116046127d1a3bad2853d02781ad9fee33f05e5a Mon Sep 17 00:00:00 2001 From: Mahesh Rajashekhara Date: Wed, 8 Feb 2012 22:51:04 -0800 Subject: [SCSI] aacraid: Added Sync.mode to support series 7/8/9 controllers Added Sync. mode to support Series 7/8/9 controller families: This is a compatibility mode for all these controller families. The Async. (Performance) mode can be changed in the future. First Async. mode version added for Series 7; Controller parameter aac_sync_mode added Signed-off-by: Mahesh Rajashekhara Signed-off-by: James Bottomley --- drivers/scsi/aacraid/aachba.c | 4 + drivers/scsi/aacraid/aacraid.h | 27 +++- drivers/scsi/aacraid/comminit.c | 21 ++- drivers/scsi/aacraid/commsup.c | 26 ++++ drivers/scsi/aacraid/linit.c | 28 +++- drivers/scsi/aacraid/rx.c | 1 + drivers/scsi/aacraid/sa.c | 1 + drivers/scsi/aacraid/src.c | 293 +++++++++++++++++++++++++++++++++------- 8 files changed, 338 insertions(+), 63 deletions(-) diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index 409f5805bdd..52551662d10 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -151,7 +151,11 @@ int aac_msi; int aac_commit = -1; int startup_timeout = 180; int aif_timeout = 120; +int aac_sync_mode; /* Only Sync. transfer - disabled */ +module_param(aac_sync_mode, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(aac_sync_mode, "Force sync. transfer mode" + " 0=off, 1=on"); module_param(nondasd, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices." " 0=off, 1=on"); diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index ffb587817ef..3fcf62724fa 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -12,7 +12,7 @@ *----------------------------------------------------------------------------*/ #ifndef AAC_DRIVER_BUILD -# define AAC_DRIVER_BUILD 28000 +# define AAC_DRIVER_BUILD 28900 # define AAC_DRIVER_BRANCH "-ms" #endif #define MAXIMUM_NUM_CONTAINERS 32 @@ -756,8 +756,16 @@ struct src_mu_registers { struct src_registers { struct src_mu_registers MUnit; /* 00h - c7h */ - __le32 reserved1[130790]; /* c8h - 7fc5fh */ - struct src_inbound IndexRegs; /* 7fc60h */ + union { + struct { + __le32 reserved1[130790]; /* c8h - 7fc5fh */ + struct src_inbound IndexRegs; /* 7fc60h */ + } tupelo; + struct { + __le32 reserved1[974]; /* c8h - fffh */ + struct src_inbound IndexRegs; /* 1000h */ + } denali; + } u; }; #define src_readb(AEP, CSR) readb(&((AEP)->regs.src.bar0->CSR)) @@ -999,6 +1007,10 @@ struct aac_bus_info_response { #define AAC_OPT_NEW_COMM cpu_to_le32(1<<17) #define AAC_OPT_NEW_COMM_64 cpu_to_le32(1<<18) #define AAC_OPT_NEW_COMM_TYPE1 cpu_to_le32(1<<28) +#define AAC_OPT_NEW_COMM_TYPE2 cpu_to_le32(1<<29) +#define AAC_OPT_NEW_COMM_TYPE3 cpu_to_le32(1<<30) +#define AAC_OPT_NEW_COMM_TYPE4 cpu_to_le32(1<<31) + struct aac_dev { @@ -1076,6 +1088,8 @@ struct aac_dev # define AAC_MIN_FOOTPRINT_SIZE 8192 # define AAC_MIN_SRC_BAR0_SIZE 0x400000 # define AAC_MIN_SRC_BAR1_SIZE 0x800 +# define AAC_MIN_SRCV_BAR0_SIZE 0x100000 +# define AAC_MIN_SRCV_BAR1_SIZE 0x400 #endif union { @@ -1116,7 +1130,10 @@ struct aac_dev u8 msi; int management_fib_count; spinlock_t manage_lock; - + spinlock_t sync_lock; + int sync_mode; + struct fib *sync_fib; + struct list_head sync_fib_list; }; #define aac_adapter_interrupt(dev) \ @@ -1163,6 +1180,7 @@ struct aac_dev #define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001) #define FIB_CONTEXT_FLAG (0x00000002) +#define FIB_CONTEXT_FLAG_WAIT (0x00000004) /* * Define the command values @@ -1970,6 +1988,7 @@ int aac_rkt_init(struct aac_dev *dev); int aac_nark_init(struct aac_dev *dev); int aac_sa_init(struct aac_dev *dev); int aac_src_init(struct aac_dev *dev); +int aac_srcv_init(struct aac_dev *dev); int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify); unsigned int aac_response_normal(struct aac_queue * q); unsigned int aac_command_normal(struct aac_queue * q); diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index 7ac8fdb5577..a35f54ebdce 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -325,12 +325,14 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev) { u32 status[5]; struct Scsi_Host * host = dev->scsi_host_ptr; + extern int aac_sync_mode; /* * Check the preferred comm settings, defaults from template. */ dev->management_fib_count = 0; spin_lock_init(&dev->manage_lock); + spin_lock_init(&dev->sync_lock); dev->max_fib_size = sizeof(struct hw_fib); dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size - sizeof(struct aac_fibhdr) @@ -344,13 +346,21 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev) (status[0] == 0x00000001)) { if (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_64)) dev->raw_io_64 = 1; - if (dev->a_ops.adapter_comm) { - if (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE1)) { - dev->comm_interface = AAC_COMM_MESSAGE_TYPE1; - dev->raw_io_interface = 1; - } else if (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM)) { + dev->sync_mode = aac_sync_mode; + if (dev->a_ops.adapter_comm && + (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM))) { dev->comm_interface = AAC_COMM_MESSAGE; dev->raw_io_interface = 1; + if ((status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE1))) { + /* driver supports TYPE1 (Tupelo) */ + dev->comm_interface = AAC_COMM_MESSAGE_TYPE1; + } else if ((status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE4)) || + (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE3)) || + (status[1] & le32_to_cpu(AAC_OPT_NEW_COMM_TYPE2))) { + /* driver doesn't support TYPE2 (Series7), TYPE3 and TYPE4 */ + /* switch to sync. mode */ + dev->comm_interface = AAC_COMM_MESSAGE_TYPE1; + dev->sync_mode = 1; } } if ((dev->comm_interface == AAC_COMM_MESSAGE) && @@ -455,6 +465,7 @@ struct aac_dev *aac_init_adapter(struct aac_dev *dev) } INIT_LIST_HEAD(&dev->fib_list); + INIT_LIST_HEAD(&dev->sync_fib_list); return dev; } diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index e5f2d7d9002..4b32ca44243 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -416,6 +416,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, unsigned long flags = 0; unsigned long qflags; unsigned long mflags = 0; + unsigned long sflags = 0; if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned))) @@ -512,6 +513,31 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, spin_lock_irqsave(&fibptr->event_lock, flags); } + if (dev->sync_mode) { + if (wait) + spin_unlock_irqrestore(&fibptr->event_lock, flags); + spin_lock_irqsave(&dev->sync_lock, sflags); + if (dev->sync_fib) { + list_add_tail(&fibptr->fiblink, &dev->sync_fib_list); + spin_unlock_irqrestore(&dev->sync_lock, sflags); + } else { + dev->sync_fib = fibptr; + spin_unlock_irqrestore(&dev->sync_lock, sflags); + aac_adapter_sync_cmd(dev, SEND_SYNCHRONOUS_FIB, + (u32)fibptr->hw_fib_pa, 0, 0, 0, 0, 0, + NULL, NULL, NULL, NULL, NULL); + } + if (wait) { + fibptr->flags |= FIB_CONTEXT_FLAG_WAIT; + if (down_interruptible(&fibptr->event_wait)) { + fibptr->flags &= ~FIB_CONTEXT_FLAG_WAIT; + return -EFAULT; + } + return 0; + } + return -EINPROGRESS; + } + if (aac_adapter_deliver(fibptr) != 0) { printk(KERN_ERR "aac_fib_send: returned -EBUSY\n"); if (wait) { diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 705e13e470a..0d279c445a3 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -56,7 +56,7 @@ #include "aacraid.h" -#define AAC_DRIVER_VERSION "1.1-7" +#define AAC_DRIVER_VERSION "1.2-0" #ifndef AAC_DRIVER_BRANCH #define AAC_DRIVER_BRANCH "" #endif @@ -162,7 +162,10 @@ static const struct pci_device_id aac_pci_tbl[] __devinitdata = { { 0x9005, 0x0285, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 59 }, /* Adaptec Catch All */ { 0x9005, 0x0286, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 60 }, /* Adaptec Rocket Catch All */ { 0x9005, 0x0288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 61 }, /* Adaptec NEMER/ARK Catch All */ - { 0x9005, 0x028b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 62 }, /* Adaptec PMC Catch All */ + { 0x9005, 0x028b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 62 }, /* Adaptec PMC Series 6 (Tupelo) */ + { 0x9005, 0x028c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 63 }, /* Adaptec PMC Series 7 (Denali) */ + { 0x9005, 0x028d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 64 }, /* Adaptec PMC Series 8 */ + { 0x9005, 0x028f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 65 }, /* Adaptec PMC Series 9 */ { 0,} }; MODULE_DEVICE_TABLE(pci, aac_pci_tbl); @@ -238,7 +241,10 @@ static struct aac_driver_ident aac_drivers[] = { { aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Catch All */ { aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Rocket Catch All */ { aac_nark_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec NEMER/ARK Catch All */ - { aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec PMC Catch All */ + { aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 6 (Tupelo) */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 7 (Denali) */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 8 */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec PMC Series 9 */ }; /** @@ -1102,6 +1108,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, int error = -ENODEV; int unique_id = 0; u64 dmamask; + extern int aac_sync_mode; list_for_each_entry(aac, &aac_devices, entry) { if (aac->id > unique_id) @@ -1162,6 +1169,21 @@ static int __devinit aac_probe_one(struct pci_dev *pdev, if ((*aac_drivers[index].init)(aac)) goto out_unmap; + if (aac->sync_mode) { + if (aac_sync_mode) + printk(KERN_INFO "%s%d: Sync. mode enforced " + "by driver parameter. This will cause " + "a significant performance decrease!\n", + aac->name, + aac->id); + else + printk(KERN_INFO "%s%d: Async. mode not supported " + "by current driver, sync. mode enforced." + "\nPlease update driver to get full performance.\n", + aac->name, + aac->id); + } + /* * Start any kernel threads needed */ diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c index ce530f113fd..b029c7cc785 100644 --- a/drivers/scsi/aacraid/rx.c +++ b/drivers/scsi/aacraid/rx.c @@ -643,6 +643,7 @@ int _aac_rx_init(struct aac_dev *dev) if (aac_init_adapter(dev) == NULL) goto error_iounmap; aac_adapter_comm(dev, dev->comm_interface); + dev->sync_mode = 0; /* sync. mode not supported */ dev->msi = aac_msi && !pci_enable_msi(dev->pdev); if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr, IRQF_SHARED|IRQF_DISABLED, "aacraid", dev) < 0) { diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c index e5d4457121e..beb533630d4 100644 --- a/drivers/scsi/aacraid/sa.c +++ b/drivers/scsi/aacraid/sa.c @@ -385,6 +385,7 @@ int aac_sa_init(struct aac_dev *dev) if(aac_init_adapter(dev) == NULL) goto error_irq; + dev->sync_mode = 0; /* sync. mode not supported */ if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr, IRQF_SHARED|IRQF_DISABLED, "aacraid", (void *)dev ) < 0) { diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c index 957595a7a45..2bee51506a9 100644 --- a/drivers/scsi/aacraid/src.c +++ b/drivers/scsi/aacraid/src.c @@ -96,6 +96,38 @@ static irqreturn_t aac_src_intr_message(int irq, void *dev_id) our_interrupt = 1; /* handle AIF */ aac_intr_normal(dev, 0, 2, 0, NULL); + } else if (bellbits_shifted & OUTBOUNDDOORBELL_0) { + unsigned long sflags; + struct list_head *entry; + int send_it = 0; + + if (dev->sync_fib) { + our_interrupt = 1; + if (dev->sync_fib->callback) + dev->sync_fib->callback(dev->sync_fib->callback_data, + dev->sync_fib); + spin_lock_irqsave(&dev->sync_fib->event_lock, sflags); + if (dev->sync_fib->flags & FIB_CONTEXT_FLAG_WAIT) { + dev->management_fib_count--; + up(&dev->sync_fib->event_wait); + } + spin_unlock_irqrestore(&dev->sync_fib->event_lock, sflags); + spin_lock_irqsave(&dev->sync_lock, sflags); + if (!list_empty(&dev->sync_fib_list)) { + entry = dev->sync_fib_list.next; + dev->sync_fib = list_entry(entry, struct fib, fiblink); + list_del(entry); + send_it = 1; + } else { + dev->sync_fib = NULL; + } + spin_unlock_irqrestore(&dev->sync_lock, sflags); + if (send_it) { + aac_adapter_sync_cmd(dev, SEND_SYNCHRONOUS_FIB, + (u32)dev->sync_fib->hw_fib_pa, 0, 0, 0, 0, 0, + NULL, NULL, NULL, NULL, NULL); + } + } } } @@ -177,56 +209,63 @@ static int src_sync_cmd(struct aac_dev *dev, u32 command, */ src_writel(dev, MUnit.IDR, INBOUNDDOORBELL_0 << SRC_IDR_SHIFT); - ok = 0; - start = jiffies; + if (!dev->sync_mode || command != SEND_SYNCHRONOUS_FIB) { + ok = 0; + start = jiffies; - /* - * Wait up to 30 seconds - */ - while (time_before(jiffies, start+30*HZ)) { - /* Delay 5 microseconds to let Mon960 get info. */ - udelay(5); - - /* Mon960 will set doorbell0 bit - * when it has completed the command + /* + * Wait up to 5 minutes */ - if ((src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT) & OUTBOUNDDOORBELL_0) { - /* Clear the doorbell */ - src_writel(dev, - MUnit.ODR_C, - OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT); - ok = 1; - break; + while (time_before(jiffies, start+300*HZ)) { + udelay(5); /* Delay 5 microseconds to let Mon960 get info. */ + /* + * Mon960 will set doorbell0 bit when it has completed the command. + */ + if ((src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT) & OUTBOUNDDOORBELL_0) { + /* + * Clear the doorbell. + */ + src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT); + ok = 1; + break; + } + /* + * Yield the processor in case we are slow + */ + msleep(1); } - - /* Yield the processor in case we are slow */ - msleep(1); - } - if (unlikely(ok != 1)) { - /* Restore interrupt mask even though we timed out */ - aac_adapter_enable_int(dev); - return -ETIMEDOUT; + if (unlikely(ok != 1)) { + /* + * Restore interrupt mask even though we timed out + */ + aac_adapter_enable_int(dev); + return -ETIMEDOUT; + } + /* + * Pull the synch status from Mailbox 0. + */ + if (status) + *status = readl(&dev->IndexRegs->Mailbox[0]); + if (r1) + *r1 = readl(&dev->IndexRegs->Mailbox[1]); + if (r2) + *r2 = readl(&dev->IndexRegs->Mailbox[2]); + if (r3) + *r3 = readl(&dev->IndexRegs->Mailbox[3]); + if (r4) + *r4 = readl(&dev->IndexRegs->Mailbox[4]); + + /* + * Clear the synch command doorbell. + */ + src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT); } - /* Pull the synch status from Mailbox 0 */ - if (status) - *status = readl(&dev->IndexRegs->Mailbox[0]); - if (r1) - *r1 = readl(&dev->IndexRegs->Mailbox[1]); - if (r2) - *r2 = readl(&dev->IndexRegs->Mailbox[2]); - if (r3) - *r3 = readl(&dev->IndexRegs->Mailbox[3]); - if (r4) - *r4 = readl(&dev->IndexRegs->Mailbox[4]); - - /* Clear the synch command doorbell */ - src_writel(dev, MUnit.ODR_C, OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT); - - /* Restore interrupt mask */ + /* + * Restore interrupt mask + */ aac_adapter_enable_int(dev); return 0; - } /** @@ -386,9 +425,7 @@ static int aac_src_ioremap(struct aac_dev *dev, u32 size) { if (!size) { iounmap(dev->regs.src.bar0); - dev->regs.src.bar0 = NULL; - iounmap(dev->base); - dev->base = NULL; + dev->base = dev->regs.src.bar0 = NULL; return 0; } dev->regs.src.bar1 = ioremap(pci_resource_start(dev->pdev, 2), @@ -404,7 +441,27 @@ static int aac_src_ioremap(struct aac_dev *dev, u32 size) return -1; } dev->IndexRegs = &((struct src_registers __iomem *) - dev->base)->IndexRegs; + dev->base)->u.tupelo.IndexRegs; + return 0; +} + +/** + * aac_srcv_ioremap + * @size: mapping resize request + * + */ +static int aac_srcv_ioremap(struct aac_dev *dev, u32 size) +{ + if (!size) { + iounmap(dev->regs.src.bar0); + dev->base = dev->regs.src.bar0 = NULL; + return 0; + } + dev->base = dev->regs.src.bar0 = ioremap(dev->scsi_host_ptr->base, size); + if (dev->base == NULL) + return -1; + dev->IndexRegs = &((struct src_registers __iomem *) + dev->base)->u.denali.IndexRegs; return 0; } @@ -419,7 +476,7 @@ static int aac_src_restart_adapter(struct aac_dev *dev, int bled) bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS, 0, 0, 0, 0, 0, 0, &var, &reset_mask, NULL, NULL, NULL); if (bled || (var != 0x00000001)) - bled = -EINVAL; + return -EINVAL; if (dev->supplement_adapter_info.SupportedOptions2 & AAC_OPTION_DOORBELL_RESET) { src_writel(dev, MUnit.IDR, reset_mask); @@ -579,15 +636,149 @@ int aac_src_init(struct aac_dev *dev) dev->dbg_size = AAC_MIN_SRC_BAR1_SIZE; aac_adapter_enable_int(dev); + + if (!dev->sync_mode) { + /* + * Tell the adapter that all is configured, and it can + * start accepting requests + */ + aac_src_start_adapter(dev); + } + return 0; + +error_iounmap: + + return -1; +} + +/** + * aac_srcv_init - initialize an SRCv card + * @dev: device to configure + * + */ + +int aac_srcv_init(struct aac_dev *dev) +{ + unsigned long start; + unsigned long status; + int restart = 0; + int instance = dev->id; + const char *name = dev->name; + + dev->a_ops.adapter_ioremap = aac_srcv_ioremap; + dev->a_ops.adapter_comm = aac_src_select_comm; + + dev->base_size = AAC_MIN_SRCV_BAR0_SIZE; + if (aac_adapter_ioremap(dev, dev->base_size)) { + printk(KERN_WARNING "%s: unable to map adapter.\n", name); + goto error_iounmap; + } + + /* Failure to reset here is an option ... */ + dev->a_ops.adapter_sync_cmd = src_sync_cmd; + dev->a_ops.adapter_enable_int = aac_src_disable_interrupt; + if ((aac_reset_devices || reset_devices) && + !aac_src_restart_adapter(dev, 0)) + ++restart; /* - * Tell the adapter that all is configured, and it can - * start accepting requests + * Check to see if the board panic'd while booting. */ - aac_src_start_adapter(dev); + status = src_readl(dev, MUnit.OMR); + if (status & KERNEL_PANIC) { + if (aac_src_restart_adapter(dev, aac_src_check_health(dev))) + goto error_iounmap; + ++restart; + } + /* + * Check to see if the board failed any self tests. + */ + status = src_readl(dev, MUnit.OMR); + if (status & SELF_TEST_FAILED) { + printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance); + goto error_iounmap; + } + /* + * Check to see if the monitor panic'd while booting. + */ + if (status & MONITOR_PANIC) { + printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance); + goto error_iounmap; + } + start = jiffies; + /* + * Wait for the adapter to be up and running. Wait up to 3 minutes + */ + while (!((status = src_readl(dev, MUnit.OMR)) & KERNEL_UP_AND_RUNNING)) { + if ((restart && + (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) || + time_after(jiffies, start+HZ*startup_timeout)) { + printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", + dev->name, instance, status); + goto error_iounmap; + } + if (!restart && + ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) || + time_after(jiffies, start + HZ * + ((startup_timeout > 60) + ? (startup_timeout - 60) + : (startup_timeout / 2))))) { + if (likely(!aac_src_restart_adapter(dev, aac_src_check_health(dev)))) + start = jiffies; + ++restart; + } + msleep(1); + } + if (restart && aac_commit) + aac_commit = 1; + /* + * Fill in the common function dispatch table. + */ + dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter; + dev->a_ops.adapter_disable_int = aac_src_disable_interrupt; + dev->a_ops.adapter_notify = aac_src_notify_adapter; + dev->a_ops.adapter_sync_cmd = src_sync_cmd; + dev->a_ops.adapter_check_health = aac_src_check_health; + dev->a_ops.adapter_restart = aac_src_restart_adapter; + + /* + * First clear out all interrupts. Then enable the one's that we + * can handle. + */ + aac_adapter_comm(dev, AAC_COMM_MESSAGE); + aac_adapter_disable_int(dev); + src_writel(dev, MUnit.ODR_C, 0xffffffff); + aac_adapter_enable_int(dev); + if (aac_init_adapter(dev) == NULL) + goto error_iounmap; + if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1) + goto error_iounmap; + dev->msi = aac_msi && !pci_enable_msi(dev->pdev); + if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr, + IRQF_SHARED|IRQF_DISABLED, "aacraid", dev) < 0) { + if (dev->msi) + pci_disable_msi(dev->pdev); + printk(KERN_ERR "%s%d: Interrupt unavailable.\n", + name, instance); + goto error_iounmap; + } + dev->dbg_base = dev->scsi_host_ptr->base; + dev->dbg_base_mapped = dev->base; + dev->dbg_size = dev->base_size; + + aac_adapter_enable_int(dev); + + if (!dev->sync_mode) { + /* + * Tell the adapter that all is configured, and it can + * start accepting requests + */ + aac_src_start_adapter(dev); + } return 0; error_iounmap: return -1; } + -- cgit v1.2.3-70-g09d2 From 050c9bb1361439e63dafb5f192f87b81d8ffbf4a Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Thu, 9 Feb 2012 11:15:33 -0800 Subject: [SCSI] qla2xxx: Enhanced the dump routines to capture multiple request and response queues. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_dbg.c | 83 ++++++++++++++++++++++++++++++++++++++++- drivers/scsi/qla2xxx/qla_dbg.h | 14 +++++++ drivers/scsi/qla2xxx/qla_init.c | 11 +++++- 3 files changed, 105 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 45cbf0ba624..cdf06176354 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -374,6 +374,77 @@ qla25xx_copy_fce(struct qla_hw_data *ha, void *ptr, uint32_t **last_chain) return (char *)iter_reg + ntohl(fcec->size); } +static inline void * +qla25xx_copy_mqueues(struct qla_hw_data *ha, void *ptr, uint32_t **last_chain) +{ + struct qla2xxx_mqueue_chain *q; + struct qla2xxx_mqueue_header *qh; + struct req_que *req; + struct rsp_que *rsp; + int que; + + if (!ha->mqenable) + return ptr; + + /* Request queues */ + for (que = 1; que < ha->max_req_queues; que++) { + req = ha->req_q_map[que]; + if (!req) + break; + + /* Add chain. */ + q = ptr; + *last_chain = &q->type; + q->type = __constant_htonl(DUMP_CHAIN_QUEUE); + q->chain_size = htonl( + sizeof(struct qla2xxx_mqueue_chain) + + sizeof(struct qla2xxx_mqueue_header) + + (req->length * sizeof(request_t))); + ptr += sizeof(struct qla2xxx_mqueue_chain); + + /* Add header. */ + qh = ptr; + qh->queue = __constant_htonl(TYPE_REQUEST_QUEUE); + qh->number = htonl(que); + qh->size = htonl(req->length * sizeof(request_t)); + ptr += sizeof(struct qla2xxx_mqueue_header); + + /* Add data. */ + memcpy(ptr, req->ring, req->length * sizeof(request_t)); + ptr += req->length * sizeof(request_t); + } + + /* Response queues */ + for (que = 1; que < ha->max_rsp_queues; que++) { + rsp = ha->rsp_q_map[que]; + if (!rsp) + break; + + /* Add chain. */ + q = ptr; + *last_chain = &q->type; + q->type = __constant_htonl(DUMP_CHAIN_QUEUE); + q->chain_size = htonl( + sizeof(struct qla2xxx_mqueue_chain) + + sizeof(struct qla2xxx_mqueue_header) + + (rsp->length * sizeof(response_t))); + ptr += sizeof(struct qla2xxx_mqueue_chain); + + /* Add header. */ + qh = ptr; + qh->queue = __constant_htonl(TYPE_RESPONSE_QUEUE); + qh->number = htonl(que); + qh->size = htonl(rsp->length * sizeof(response_t)); + ptr += sizeof(struct qla2xxx_mqueue_header); + + /* Add data. */ + memcpy(ptr, rsp->ring, rsp->length * sizeof(response_t)); + ptr += rsp->length * sizeof(response_t); + } + + return ptr; +} + static inline void * qla25xx_copy_mq(struct qla_hw_data *ha, void *ptr, uint32_t **last_chain) { @@ -1322,12 +1393,16 @@ qla25xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked) nxt = qla24xx_copy_eft(ha, nxt); /* Chain entries -- started with MQ. */ - qla25xx_copy_fce(ha, nxt_chain, &last_chain); + nxt_chain = qla25xx_copy_fce(ha, nxt_chain, &last_chain); + nxt_chain = qla25xx_copy_mqueues(ha, nxt_chain, &last_chain); if (last_chain) { ha->fw_dump->version |= __constant_htonl(DUMP_CHAIN_VARIANT); *last_chain |= __constant_htonl(DUMP_CHAIN_LAST); } + /* Adjust valid length. */ + ha->fw_dump_len = (nxt_chain - (void *)ha->fw_dump); + qla25xx_fw_dump_failed_0: qla2xxx_dump_post_process(base_vha, rval); @@ -1636,12 +1711,16 @@ qla81xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked) nxt = qla24xx_copy_eft(ha, nxt); /* Chain entries -- started with MQ. */ - qla25xx_copy_fce(ha, nxt_chain, &last_chain); + nxt_chain = qla25xx_copy_fce(ha, nxt_chain, &last_chain); + nxt_chain = qla25xx_copy_mqueues(ha, nxt_chain, &last_chain); if (last_chain) { ha->fw_dump->version |= __constant_htonl(DUMP_CHAIN_VARIANT); *last_chain |= __constant_htonl(DUMP_CHAIN_LAST); } + /* Adjust valid length. */ + ha->fw_dump_len = (nxt_chain - (void *)ha->fw_dump); + qla81xx_fw_dump_failed_0: qla2xxx_dump_post_process(base_vha, rval); diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h index 5f1b6d9c3dc..6b05cb1d187 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.h +++ b/drivers/scsi/qla2xxx/qla_dbg.h @@ -192,9 +192,23 @@ struct qla2xxx_mq_chain { uint32_t qregs[4 * QLA_MQ_SIZE]; }; +struct qla2xxx_mqueue_header { + uint32_t queue; +#define TYPE_REQUEST_QUEUE 0x1 +#define TYPE_RESPONSE_QUEUE 0x2 + uint32_t number; + uint32_t size; +}; + +struct qla2xxx_mqueue_chain { + uint32_t type; + uint32_t chain_size; +}; + #define DUMP_CHAIN_VARIANT 0x80000000 #define DUMP_CHAIN_FCE 0x7FFFFAF0 #define DUMP_CHAIN_MQ 0x7FFFFAF1 +#define DUMP_CHAIN_QUEUE 0x7FFFFAF2 #define DUMP_CHAIN_LAST 0x80000000 struct qla2xxx_fw_dump { diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 1fa067e053d..68555dfee6a 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1270,8 +1270,17 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha) fixed_size = offsetof(struct qla24xx_fw_dump, ext_mem); mem_size = (ha->fw_memory_size - 0x100000 + 1) * sizeof(uint32_t); - if (ha->mqenable) + if (ha->mqenable) { mq_size = sizeof(struct qla2xxx_mq_chain); + /* + * Allocate maximum buffer size for all queues. + * Resizing must be done at end-of-dump processing. + */ + mq_size += ha->max_req_queues * + (req->length * sizeof(request_t)); + mq_size += ha->max_rsp_queues * + (rsp->length * sizeof(response_t)); + } /* Allocate memory for Fibre Channel Event Buffer. */ if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)) goto try_eft; -- cgit v1.2.3-70-g09d2 From 6246b8a1d26c7cdb77fd2f3f3578d4db025d5c9e Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Thu, 9 Feb 2012 11:15:34 -0800 Subject: [SCSI] qla2xxx: Enhancements to support ISP83xx. Signed-off-by: Saurav Kashyap Signed-off-by: Giridhar Malavali Signed-off-by: Andrew Vasquez Signed-off-by: Harish Zunjarrao Signed-off-by: Nigel Kirkland Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 23 +- drivers/scsi/qla2xxx/qla_bsg.c | 10 +- drivers/scsi/qla2xxx/qla_dbg.c | 521 +++++++++++++++++++++++++++++++++++++++- drivers/scsi/qla2xxx/qla_dbg.h | 49 ++++ drivers/scsi/qla2xxx/qla_def.h | 37 ++- drivers/scsi/qla2xxx/qla_dfs.c | 2 +- drivers/scsi/qla2xxx/qla_fw.h | 13 + drivers/scsi/qla2xxx/qla_gbl.h | 10 +- drivers/scsi/qla2xxx/qla_gs.c | 6 +- drivers/scsi/qla2xxx/qla_init.c | 66 ++--- drivers/scsi/qla2xxx/qla_iocb.c | 9 +- drivers/scsi/qla2xxx/qla_isr.c | 44 ++-- drivers/scsi/qla2xxx/qla_mbx.c | 262 ++++++++++++++++---- drivers/scsi/qla2xxx/qla_nx.c | 8 +- drivers/scsi/qla2xxx/qla_nx.h | 3 +- drivers/scsi/qla2xxx/qla_os.c | 192 ++++++++++++++- drivers/scsi/qla2xxx/qla_sup.c | 148 ++++++++++-- 17 files changed, 1233 insertions(+), 170 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 9f41b3b4358..7f895cdcaeb 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -356,7 +356,8 @@ qla2x00_sysfs_write_optrom_ctl(struct file *filp, struct kobject *kobj, else if (start == (ha->flt_region_boot * 4) || start == (ha->flt_region_fw * 4)) valid = 1; - else if (IS_QLA25XX(ha) || IS_QLA8XXX_TYPE(ha)) + else if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha) + || IS_CNA_CAPABLE(ha) || IS_QLA2031(ha)) valid = 1; if (!valid) { ql_log(ql_log_warn, vha, 0x7065, @@ -898,7 +899,7 @@ qla2x00_alloc_sysfs_attr(scsi_qla_host_t *vha) continue; if (iter->is4GBp_only == 2 && !IS_QLA25XX(vha->hw)) continue; - if (iter->is4GBp_only == 3 && !(IS_QLA8XXX_TYPE(vha->hw))) + if (iter->is4GBp_only == 3 && !(IS_CNA_CAPABLE(vha->hw))) continue; ret = sysfs_create_bin_file(&host->shost_gendev.kobj, @@ -926,7 +927,7 @@ qla2x00_free_sysfs_attr(scsi_qla_host_t *vha) continue; if (iter->is4GBp_only == 2 && !IS_QLA25XX(ha)) continue; - if (iter->is4GBp_only == 3 && !!(IS_QLA8XXX_TYPE(vha->hw))) + if (iter->is4GBp_only == 3 && !(IS_CNA_CAPABLE(vha->hw))) continue; sysfs_remove_bin_file(&host->shost_gendev.kobj, @@ -1231,7 +1232,7 @@ qla2x00_optrom_gold_fw_version_show(struct device *dev, scsi_qla_host_t *vha = shost_priv(class_to_shost(dev)); struct qla_hw_data *ha = vha->hw; - if (!IS_QLA81XX(ha)) + if (!IS_QLA81XX(ha) && !IS_QLA83XX(ha)) return snprintf(buf, PAGE_SIZE, "\n"); return snprintf(buf, PAGE_SIZE, "%d.%02d.%02d (%d)\n", @@ -1278,7 +1279,7 @@ qla2x00_mpi_version_show(struct device *dev, struct device_attribute *attr, scsi_qla_host_t *vha = shost_priv(class_to_shost(dev)); struct qla_hw_data *ha = vha->hw; - if (!IS_QLA81XX(ha)) + if (!IS_QLA81XX(ha) && !IS_QLA8031(ha)) return snprintf(buf, PAGE_SIZE, "\n"); return snprintf(buf, PAGE_SIZE, "%d.%02d.%02d (%x)\n", @@ -1293,7 +1294,7 @@ qla2x00_phy_version_show(struct device *dev, struct device_attribute *attr, scsi_qla_host_t *vha = shost_priv(class_to_shost(dev)); struct qla_hw_data *ha = vha->hw; - if (!IS_QLA81XX(ha)) + if (!IS_QLA81XX(ha) && !IS_QLA83XX(ha)) return snprintf(buf, PAGE_SIZE, "\n"); return snprintf(buf, PAGE_SIZE, "%d.%02d.%02d\n", @@ -1316,7 +1317,7 @@ qla2x00_vlan_id_show(struct device *dev, struct device_attribute *attr, { scsi_qla_host_t *vha = shost_priv(class_to_shost(dev)); - if (!IS_QLA8XXX_TYPE(vha->hw)) + if (!IS_CNA_CAPABLE(vha->hw)) return snprintf(buf, PAGE_SIZE, "\n"); return snprintf(buf, PAGE_SIZE, "%d\n", vha->fcoe_vlan_id); @@ -1328,7 +1329,7 @@ qla2x00_vn_port_mac_address_show(struct device *dev, { scsi_qla_host_t *vha = shost_priv(class_to_shost(dev)); - if (!IS_QLA8XXX_TYPE(vha->hw)) + if (!IS_CNA_CAPABLE(vha->hw)) return snprintf(buf, PAGE_SIZE, "\n"); return snprintf(buf, PAGE_SIZE, "%02x:%02x:%02x:%02x:%02x:%02x\n", @@ -1493,6 +1494,9 @@ qla2x00_get_host_speed(struct Scsi_Host *shost) case PORT_SPEED_10GB: speed = FC_PORTSPEED_10GBIT; break; + case PORT_SPEED_16GB: + speed = FC_PORTSPEED_16GBIT; + break; } fc_host_speed(shost) = speed; } @@ -1889,6 +1893,7 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable) break; } } + if (qos) { ret = qla25xx_create_req_que(ha, options, vha->vp_idx, 0, 0, qos); @@ -2086,7 +2091,7 @@ qla2x00_init_host_attr(scsi_qla_host_t *vha) fc_host_max_npiv_vports(vha->host) = ha->max_npiv_vports; fc_host_npiv_vports_inuse(vha->host) = ha->cur_vport_count; - if (IS_QLA8XXX_TYPE(ha)) + if (IS_CNA_CAPABLE(ha)) speed = FC_PORTSPEED_10GBIT; else if (IS_QLA25XX(ha)) speed = FC_PORTSPEED_8GBIT | FC_PORTSPEED_4GBIT | diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index 1682e2e4201..6887538d173 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -540,7 +540,7 @@ qla81xx_set_internal_loopback(scsi_qla_host_t *vha, uint16_t *config, int rval = 0; struct qla_hw_data *ha = vha->hw; - if (!IS_QLA81XX(ha)) + if (!IS_QLA81XX(ha) && !IS_QLA83XX(ha)) goto done_set_internal; new_config[0] = config[0] | (ENABLE_INTERNAL_LOOPBACK << 1); @@ -582,7 +582,7 @@ qla81xx_reset_internal_loopback(scsi_qla_host_t *vha, uint16_t *config, uint16_t new_config[4]; struct qla_hw_data *ha = vha->hw; - if (!IS_QLA81XX(ha)) + if (!IS_QLA81XX(ha) && !IS_QLA83XX(ha)) goto done_reset_internal; memset(new_config, 0 , sizeof(new_config)); @@ -707,7 +707,7 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) if ((ha->current_topology == ISP_CFG_F || (atomic_read(&vha->loop_state) == LOOP_DOWN) || - (IS_QLA81XX(ha) && + ((IS_QLA81XX(ha) || IS_QLA83XX(ha)) && le32_to_cpu(*(uint32_t *)req_data) == ELS_OPCODE_BYTE && req_data_len == MAX_ELS_FRAME_PAYLOAD)) && elreq.options == EXTERNAL_LOOPBACK) { @@ -717,7 +717,7 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) command_sent = INT_DEF_LB_ECHO_CMD; rval = qla2x00_echo_test(vha, &elreq, response); } else { - if (IS_QLA81XX(ha)) { + if (IS_QLA81XX(ha) || IS_QLA8031(ha)) { memset(config, 0, sizeof(config)); memset(new_config, 0, sizeof(new_config)); if (qla81xx_get_port_config(vha, config)) { @@ -1331,7 +1331,7 @@ qla2x00_optrom_setup(struct fc_bsg_job *bsg_job, scsi_qla_host_t *vha, start == (ha->flt_region_fw * 4)) valid = 1; else if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha) || - IS_QLA8XXX_TYPE(ha)) + IS_CNA_CAPABLE(ha) || IS_QLA2031(ha)) valid = 1; if (!valid) { ql_log(ql_log_warn, vha, 0x7058, diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index cdf06176354..e4c6b940993 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -11,23 +11,23 @@ * ---------------------------------------------------------------------- * | Level | Last Value Used | Holes | * ---------------------------------------------------------------------- - * | Module Init and Probe | 0x0116 | 0xfa | - * | Mailbox commands | 0x112b | | - * | Device Discovery | 0x2084 | | - * | Queue Command and IO tracing | 0x302f | 0x3008,0x302d, | - * | | | 0x302e | + * | Module Init and Probe | 0x011f | 0x4b,0xfa | + * | Mailbox commands | 0x1139 | 0x112c-0x112e | + * | Device Discovery | 0x2084 | | + * | Queue Command and IO tracing | 0x302f | 0x3008 | + * | | | 0x302d-0x302e | * | DPC Thread | 0x401c | | * | Async Events | 0x5057 | 0x5052 | - * | Timer Routines | 0x6011 | 0x600e,0x600f | + * | Timer Routines | 0x6011 | 0x600e-0x600f | * | User Space Interactions | 0x709e | 0x7018,0x702e | * | | | 0x7039,0x7045 | * | Task Management | 0x803c | 0x8025-0x8026 | * | | | 0x800b,0x8039 | * | AER/EEH | 0x900f | | * | Virtual Port | 0xa007 | | - * | ISP82XX Specific | 0xb052 | | - * | MultiQ | 0xc00b | | - * | Misc | 0xd00b | | + * | ISP82XX Specific | 0xb052 | | + * | MultiQ | 0xc00c | | + * | Misc | 0xd010 | | * ---------------------------------------------------------------------- */ @@ -453,7 +453,7 @@ qla25xx_copy_mq(struct qla_hw_data *ha, void *ptr, uint32_t **last_chain) struct qla2xxx_mq_chain *mq = ptr; struct device_reg_25xxmq __iomem *reg; - if (!ha->mqenable) + if (!ha->mqenable || IS_QLA83XX(ha)) return ptr; mq = ptr; @@ -1729,6 +1729,507 @@ qla81xx_fw_dump_failed: spin_unlock_irqrestore(&ha->hardware_lock, flags); } +void +qla83xx_fw_dump(scsi_qla_host_t *vha, int hardware_locked) +{ + int rval; + uint32_t cnt, reg_data; + uint32_t risc_address; + struct qla_hw_data *ha = vha->hw; + struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + uint32_t __iomem *dmp_reg; + uint32_t *iter_reg; + uint16_t __iomem *mbx_reg; + unsigned long flags; + struct qla83xx_fw_dump *fw; + uint32_t ext_mem_cnt; + void *nxt, *nxt_chain; + uint32_t *last_chain = NULL; + struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); + + risc_address = ext_mem_cnt = 0; + flags = 0; + + if (!hardware_locked) + spin_lock_irqsave(&ha->hardware_lock, flags); + + if (!ha->fw_dump) { + ql_log(ql_log_warn, vha, 0xd00c, + "No buffer available for dump!!!\n"); + goto qla83xx_fw_dump_failed; + } + + if (ha->fw_dumped) { + ql_log(ql_log_warn, vha, 0xd00d, + "Firmware has been previously dumped (%p) -- ignoring " + "request...\n", ha->fw_dump); + goto qla83xx_fw_dump_failed; + } + fw = &ha->fw_dump->isp.isp83; + qla2xxx_prep_dump(ha, ha->fw_dump); + + fw->host_status = htonl(RD_REG_DWORD(®->host_status)); + + /* Pause RISC. */ + rval = qla24xx_pause_risc(reg); + if (rval != QLA_SUCCESS) + goto qla83xx_fw_dump_failed_0; + + WRT_REG_DWORD(®->iobase_addr, 0x6000); + dmp_reg = ®->iobase_window; + reg_data = RD_REG_DWORD(dmp_reg); + WRT_REG_DWORD(dmp_reg, 0); + + dmp_reg = ®->unused_4_1[0]; + reg_data = RD_REG_DWORD(dmp_reg); + WRT_REG_DWORD(dmp_reg, 0); + + WRT_REG_DWORD(®->iobase_addr, 0x6010); + dmp_reg = ®->unused_4_1[2]; + reg_data = RD_REG_DWORD(dmp_reg); + WRT_REG_DWORD(dmp_reg, 0); + + /* select PCR and disable ecc checking and correction */ + WRT_REG_DWORD(®->iobase_addr, 0x0F70); + RD_REG_DWORD(®->iobase_addr); + WRT_REG_DWORD(®->iobase_select, 0x60000000); /* write to F0h = PCR */ + + /* Host/Risc registers. */ + iter_reg = fw->host_risc_reg; + iter_reg = qla24xx_read_window(reg, 0x7000, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x7010, 16, iter_reg); + qla24xx_read_window(reg, 0x7040, 16, iter_reg); + + /* PCIe registers. */ + WRT_REG_DWORD(®->iobase_addr, 0x7C00); + RD_REG_DWORD(®->iobase_addr); + WRT_REG_DWORD(®->iobase_window, 0x01); + dmp_reg = ®->iobase_c4; + fw->pcie_regs[0] = htonl(RD_REG_DWORD(dmp_reg++)); + fw->pcie_regs[1] = htonl(RD_REG_DWORD(dmp_reg++)); + fw->pcie_regs[2] = htonl(RD_REG_DWORD(dmp_reg)); + fw->pcie_regs[3] = htonl(RD_REG_DWORD(®->iobase_window)); + + WRT_REG_DWORD(®->iobase_window, 0x00); + RD_REG_DWORD(®->iobase_window); + + /* Host interface registers. */ + dmp_reg = ®->flash_addr; + for (cnt = 0; cnt < sizeof(fw->host_reg) / 4; cnt++) + fw->host_reg[cnt] = htonl(RD_REG_DWORD(dmp_reg++)); + + /* Disable interrupts. */ + WRT_REG_DWORD(®->ictrl, 0); + RD_REG_DWORD(®->ictrl); + + /* Shadow registers. */ + WRT_REG_DWORD(®->iobase_addr, 0x0F70); + RD_REG_DWORD(®->iobase_addr); + WRT_REG_DWORD(®->iobase_select, 0xB0000000); + fw->shadow_reg[0] = htonl(RD_REG_DWORD(®->iobase_sdata)); + + WRT_REG_DWORD(®->iobase_select, 0xB0100000); + fw->shadow_reg[1] = htonl(RD_REG_DWORD(®->iobase_sdata)); + + WRT_REG_DWORD(®->iobase_select, 0xB0200000); + fw->shadow_reg[2] = htonl(RD_REG_DWORD(®->iobase_sdata)); + + WRT_REG_DWORD(®->iobase_select, 0xB0300000); + fw->shadow_reg[3] = htonl(RD_REG_DWORD(®->iobase_sdata)); + + WRT_REG_DWORD(®->iobase_select, 0xB0400000); + fw->shadow_reg[4] = htonl(RD_REG_DWORD(®->iobase_sdata)); + + WRT_REG_DWORD(®->iobase_select, 0xB0500000); + fw->shadow_reg[5] = htonl(RD_REG_DWORD(®->iobase_sdata)); + + WRT_REG_DWORD(®->iobase_select, 0xB0600000); + fw->shadow_reg[6] = htonl(RD_REG_DWORD(®->iobase_sdata)); + + WRT_REG_DWORD(®->iobase_select, 0xB0700000); + fw->shadow_reg[7] = htonl(RD_REG_DWORD(®->iobase_sdata)); + + WRT_REG_DWORD(®->iobase_select, 0xB0800000); + fw->shadow_reg[8] = htonl(RD_REG_DWORD(®->iobase_sdata)); + + WRT_REG_DWORD(®->iobase_select, 0xB0900000); + fw->shadow_reg[9] = htonl(RD_REG_DWORD(®->iobase_sdata)); + + WRT_REG_DWORD(®->iobase_select, 0xB0A00000); + fw->shadow_reg[10] = htonl(RD_REG_DWORD(®->iobase_sdata)); + + /* RISC I/O register. */ + WRT_REG_DWORD(®->iobase_addr, 0x0010); + fw->risc_io_reg = htonl(RD_REG_DWORD(®->iobase_window)); + + /* Mailbox registers. */ + mbx_reg = ®->mailbox0; + for (cnt = 0; cnt < sizeof(fw->mailbox_reg) / 2; cnt++) + fw->mailbox_reg[cnt] = htons(RD_REG_WORD(mbx_reg++)); + + /* Transfer sequence registers. */ + iter_reg = fw->xseq_gp_reg; + iter_reg = qla24xx_read_window(reg, 0xBE00, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xBE10, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xBE20, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xBE30, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xBE40, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xBE50, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xBE60, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xBE70, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xBF00, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xBF10, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xBF20, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xBF30, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xBF40, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xBF50, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xBF60, 16, iter_reg); + qla24xx_read_window(reg, 0xBF70, 16, iter_reg); + + iter_reg = fw->xseq_0_reg; + iter_reg = qla24xx_read_window(reg, 0xBFC0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xBFD0, 16, iter_reg); + qla24xx_read_window(reg, 0xBFE0, 16, iter_reg); + + qla24xx_read_window(reg, 0xBFF0, 16, fw->xseq_1_reg); + + qla24xx_read_window(reg, 0xBEF0, 16, fw->xseq_2_reg); + + /* Receive sequence registers. */ + iter_reg = fw->rseq_gp_reg; + iter_reg = qla24xx_read_window(reg, 0xFE00, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xFE10, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xFE20, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xFE30, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xFE40, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xFE50, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xFE60, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xFE70, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xFF00, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xFF10, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xFF20, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xFF30, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xFF40, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xFF50, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xFF60, 16, iter_reg); + qla24xx_read_window(reg, 0xFF70, 16, iter_reg); + + iter_reg = fw->rseq_0_reg; + iter_reg = qla24xx_read_window(reg, 0xFFC0, 16, iter_reg); + qla24xx_read_window(reg, 0xFFD0, 16, iter_reg); + + qla24xx_read_window(reg, 0xFFE0, 16, fw->rseq_1_reg); + qla24xx_read_window(reg, 0xFFF0, 16, fw->rseq_2_reg); + qla24xx_read_window(reg, 0xFEF0, 16, fw->rseq_3_reg); + + /* Auxiliary sequence registers. */ + iter_reg = fw->aseq_gp_reg; + iter_reg = qla24xx_read_window(reg, 0xB000, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xB010, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xB020, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xB030, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xB040, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xB050, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xB060, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xB070, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xB100, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xB110, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xB120, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xB130, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xB140, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xB150, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0xB160, 16, iter_reg); + qla24xx_read_window(reg, 0xB170, 16, iter_reg); + + iter_reg = fw->aseq_0_reg; + iter_reg = qla24xx_read_window(reg, 0xB0C0, 16, iter_reg); + qla24xx_read_window(reg, 0xB0D0, 16, iter_reg); + + qla24xx_read_window(reg, 0xB0E0, 16, fw->aseq_1_reg); + qla24xx_read_window(reg, 0xB0F0, 16, fw->aseq_2_reg); + qla24xx_read_window(reg, 0xB1F0, 16, fw->aseq_3_reg); + + /* Command DMA registers. */ + iter_reg = fw->cmd_dma_reg; + iter_reg = qla24xx_read_window(reg, 0x7100, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x7120, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x7130, 16, iter_reg); + qla24xx_read_window(reg, 0x71F0, 16, iter_reg); + + /* Queues. */ + iter_reg = fw->req0_dma_reg; + iter_reg = qla24xx_read_window(reg, 0x7200, 8, iter_reg); + dmp_reg = ®->iobase_q; + for (cnt = 0; cnt < 7; cnt++) + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); + + iter_reg = fw->resp0_dma_reg; + iter_reg = qla24xx_read_window(reg, 0x7300, 8, iter_reg); + dmp_reg = ®->iobase_q; + for (cnt = 0; cnt < 7; cnt++) + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); + + iter_reg = fw->req1_dma_reg; + iter_reg = qla24xx_read_window(reg, 0x7400, 8, iter_reg); + dmp_reg = ®->iobase_q; + for (cnt = 0; cnt < 7; cnt++) + *iter_reg++ = htonl(RD_REG_DWORD(dmp_reg++)); + + /* Transmit DMA registers. */ + iter_reg = fw->xmt0_dma_reg; + iter_reg = qla24xx_read_window(reg, 0x7600, 16, iter_reg); + qla24xx_read_window(reg, 0x7610, 16, iter_reg); + + iter_reg = fw->xmt1_dma_reg; + iter_reg = qla24xx_read_window(reg, 0x7620, 16, iter_reg); + qla24xx_read_window(reg, 0x7630, 16, iter_reg); + + iter_reg = fw->xmt2_dma_reg; + iter_reg = qla24xx_read_window(reg, 0x7640, 16, iter_reg); + qla24xx_read_window(reg, 0x7650, 16, iter_reg); + + iter_reg = fw->xmt3_dma_reg; + iter_reg = qla24xx_read_window(reg, 0x7660, 16, iter_reg); + qla24xx_read_window(reg, 0x7670, 16, iter_reg); + + iter_reg = fw->xmt4_dma_reg; + iter_reg = qla24xx_read_window(reg, 0x7680, 16, iter_reg); + qla24xx_read_window(reg, 0x7690, 16, iter_reg); + + qla24xx_read_window(reg, 0x76A0, 16, fw->xmt_data_dma_reg); + + /* Receive DMA registers. */ + iter_reg = fw->rcvt0_data_dma_reg; + iter_reg = qla24xx_read_window(reg, 0x7700, 16, iter_reg); + qla24xx_read_window(reg, 0x7710, 16, iter_reg); + + iter_reg = fw->rcvt1_data_dma_reg; + iter_reg = qla24xx_read_window(reg, 0x7720, 16, iter_reg); + qla24xx_read_window(reg, 0x7730, 16, iter_reg); + + /* RISC registers. */ + iter_reg = fw->risc_gp_reg; + iter_reg = qla24xx_read_window(reg, 0x0F00, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x0F10, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x0F20, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x0F30, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x0F40, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x0F50, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x0F60, 16, iter_reg); + qla24xx_read_window(reg, 0x0F70, 16, iter_reg); + + /* Local memory controller registers. */ + iter_reg = fw->lmc_reg; + iter_reg = qla24xx_read_window(reg, 0x3000, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x3010, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x3020, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x3030, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x3040, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x3050, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x3060, 16, iter_reg); + qla24xx_read_window(reg, 0x3070, 16, iter_reg); + + /* Fibre Protocol Module registers. */ + iter_reg = fw->fpm_hdw_reg; + iter_reg = qla24xx_read_window(reg, 0x4000, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x4010, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x4020, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x4030, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x4040, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x4050, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x4060, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x4070, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x4080, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x4090, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x40A0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x40B0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x40C0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x40D0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x40E0, 16, iter_reg); + qla24xx_read_window(reg, 0x40F0, 16, iter_reg); + + /* RQ0 Array registers. */ + iter_reg = fw->rq0_array_reg; + iter_reg = qla24xx_read_window(reg, 0x5C00, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5C10, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5C20, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5C30, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5C40, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5C50, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5C60, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5C70, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5C80, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5C90, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5CA0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5CB0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5CC0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5CD0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5CE0, 16, iter_reg); + qla24xx_read_window(reg, 0x5CF0, 16, iter_reg); + + /* RQ1 Array registers. */ + iter_reg = fw->rq1_array_reg; + iter_reg = qla24xx_read_window(reg, 0x5D00, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5D10, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5D20, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5D30, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5D40, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5D50, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5D60, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5D70, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5D80, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5D90, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5DA0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5DB0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5DC0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5DD0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5DE0, 16, iter_reg); + qla24xx_read_window(reg, 0x5DF0, 16, iter_reg); + + /* RP0 Array registers. */ + iter_reg = fw->rp0_array_reg; + iter_reg = qla24xx_read_window(reg, 0x5E00, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5E10, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5E20, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5E30, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5E40, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5E50, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5E60, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5E70, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5E80, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5E90, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5EA0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5EB0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5EC0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5ED0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5EE0, 16, iter_reg); + qla24xx_read_window(reg, 0x5EF0, 16, iter_reg); + + /* RP1 Array registers. */ + iter_reg = fw->rp1_array_reg; + iter_reg = qla24xx_read_window(reg, 0x5F00, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5F10, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5F20, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5F30, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5F40, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5F50, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5F60, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5F70, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5F80, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5F90, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5FA0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5FB0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5FC0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5FD0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x5FE0, 16, iter_reg); + qla24xx_read_window(reg, 0x5FF0, 16, iter_reg); + + iter_reg = fw->at0_array_reg; + iter_reg = qla24xx_read_window(reg, 0x7080, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x7090, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x70A0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x70B0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x70C0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x70D0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x70E0, 16, iter_reg); + qla24xx_read_window(reg, 0x70F0, 16, iter_reg); + + /* I/O Queue Control registers. */ + qla24xx_read_window(reg, 0x7800, 16, fw->queue_control_reg); + + /* Frame Buffer registers. */ + iter_reg = fw->fb_hdw_reg; + iter_reg = qla24xx_read_window(reg, 0x6000, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6010, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6020, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6030, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6040, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6060, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6070, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6100, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6130, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6150, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6170, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6190, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x61B0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x61C0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6530, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6540, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6550, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6560, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6570, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6580, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x6590, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x65A0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x65B0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x65C0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x65D0, 16, iter_reg); + iter_reg = qla24xx_read_window(reg, 0x65E0, 16, iter_reg); + qla24xx_read_window(reg, 0x6F00, 16, iter_reg); + + /* Multi queue registers */ + nxt_chain = qla25xx_copy_mq(ha, (void *)ha->fw_dump + ha->chain_offset, + &last_chain); + + rval = qla24xx_soft_reset(ha); + if (rval != QLA_SUCCESS) { + ql_log(ql_log_warn, vha, 0xd00e, + "SOFT RESET FAILED, forcing continuation of dump!!!\n"); + rval = QLA_SUCCESS; + + ql_log(ql_log_warn, vha, 0xd00f, "try a bigger hammer!!!\n"); + + WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_RESET); + RD_REG_DWORD(®->hccr); + + WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE); + RD_REG_DWORD(®->hccr); + + WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_RESET); + RD_REG_DWORD(®->hccr); + + for (cnt = 30000; cnt && (RD_REG_WORD(®->mailbox0)); cnt--) + udelay(5); + + if (!cnt) { + nxt = fw->code_ram; + nxt += sizeof(fw->code_ram), + nxt += (ha->fw_memory_size - 0x100000 + 1); + goto copy_queue; + } else + ql_log(ql_log_warn, vha, 0xd010, + "bigger hammer success?\n"); + } + + rval = qla24xx_dump_memory(ha, fw->code_ram, sizeof(fw->code_ram), + &nxt); + if (rval != QLA_SUCCESS) + goto qla83xx_fw_dump_failed_0; + +copy_queue: + nxt = qla2xxx_copy_queues(ha, nxt); + + nxt = qla24xx_copy_eft(ha, nxt); + + /* Chain entries -- started with MQ. */ + nxt_chain = qla25xx_copy_fce(ha, nxt_chain, &last_chain); + nxt_chain = qla25xx_copy_mqueues(ha, nxt_chain, &last_chain); + if (last_chain) { + ha->fw_dump->version |= __constant_htonl(DUMP_CHAIN_VARIANT); + *last_chain |= __constant_htonl(DUMP_CHAIN_LAST); + } + + /* Adjust valid length. */ + ha->fw_dump_len = (nxt_chain - (void *)ha->fw_dump); + +qla83xx_fw_dump_failed_0: + qla2xxx_dump_post_process(base_vha, rval); + +qla83xx_fw_dump_failed: + if (!hardware_locked) + spin_unlock_irqrestore(&ha->hardware_lock, flags); +} + /****************************************************************************/ /* Driver Debug Functions. */ /****************************************************************************/ diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h index 6b05cb1d187..2157bdf1569 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.h +++ b/drivers/scsi/qla2xxx/qla_dbg.h @@ -165,6 +165,54 @@ struct qla81xx_fw_dump { uint32_t ext_mem[1]; }; +struct qla83xx_fw_dump { + uint32_t host_status; + uint32_t host_risc_reg[48]; + uint32_t pcie_regs[4]; + uint32_t host_reg[32]; + uint32_t shadow_reg[11]; + uint32_t risc_io_reg; + uint16_t mailbox_reg[32]; + uint32_t xseq_gp_reg[256]; + uint32_t xseq_0_reg[48]; + uint32_t xseq_1_reg[16]; + uint32_t xseq_2_reg[16]; + uint32_t rseq_gp_reg[256]; + uint32_t rseq_0_reg[32]; + uint32_t rseq_1_reg[16]; + uint32_t rseq_2_reg[16]; + uint32_t rseq_3_reg[16]; + uint32_t aseq_gp_reg[256]; + uint32_t aseq_0_reg[32]; + uint32_t aseq_1_reg[16]; + uint32_t aseq_2_reg[16]; + uint32_t aseq_3_reg[16]; + uint32_t cmd_dma_reg[64]; + uint32_t req0_dma_reg[15]; + uint32_t resp0_dma_reg[15]; + uint32_t req1_dma_reg[15]; + uint32_t xmt0_dma_reg[32]; + uint32_t xmt1_dma_reg[32]; + uint32_t xmt2_dma_reg[32]; + uint32_t xmt3_dma_reg[32]; + uint32_t xmt4_dma_reg[32]; + uint32_t xmt_data_dma_reg[16]; + uint32_t rcvt0_data_dma_reg[32]; + uint32_t rcvt1_data_dma_reg[32]; + uint32_t risc_gp_reg[128]; + uint32_t lmc_reg[128]; + uint32_t fpm_hdw_reg[256]; + uint32_t rq0_array_reg[256]; + uint32_t rq1_array_reg[256]; + uint32_t rp0_array_reg[256]; + uint32_t rp1_array_reg[256]; + uint32_t queue_control_reg[16]; + uint32_t fb_hdw_reg[432]; + uint32_t at0_array_reg[128]; + uint32_t code_ram[0x2400]; + uint32_t ext_mem[1]; +}; + #define EFT_NUM_BUFFERS 4 #define EFT_BYTES_PER_BUFFER 0x4000 #define EFT_SIZE ((EFT_BYTES_PER_BUFFER) * (EFT_NUM_BUFFERS)) @@ -242,6 +290,7 @@ struct qla2xxx_fw_dump { struct qla24xx_fw_dump isp24; struct qla25xx_fw_dump isp25; struct qla81xx_fw_dump isp81; + struct qla83xx_fw_dump isp83; } isp; }; diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index af1003f9de1..7b7d829bef8 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -653,6 +653,7 @@ typedef struct { #define MBC_DIAGNOSTIC_LOOP_BACK 0x45 /* Diagnostic loop back. */ #define MBC_ONLINE_SELF_TEST 0x46 /* Online self-test. */ #define MBC_ENHANCED_GET_PORT_DATABASE 0x47 /* Get port database + login */ +#define MBC_CONFIGURE_VF 0x4b /* Configure VFs */ #define MBC_RESET_LINK_STATUS 0x52 /* Reset Link Error Status */ #define MBC_IOCB_COMMAND_A64 0x54 /* Execute IOCB command (64) */ #define MBC_SEND_RNID_ELS 0x57 /* Send RNID ELS request */ @@ -2261,6 +2262,7 @@ struct isp_operations { #define QLA_MIDX_DEFAULT 0 #define QLA_MIDX_RSP_Q 1 #define QLA_PCI_MSIX_CONTROL 0xa2 +#define QLA_83XX_PCI_MSIX_CONTROL 0x92 struct scsi_qla_host; @@ -2341,7 +2343,7 @@ struct qla_statistics { #define QLA_MQ_SIZE 32 #define QLA_MAX_QUEUES 256 #define ISP_QUE_REG(ha, id) \ - ((ha->mqenable) ? \ + ((ha->mqenable || IS_QLA83XX(ha)) ? \ ((void *)(ha->mqiobase) +\ (QLA_QUE_PAGE * id)) :\ ((void *)(ha->iobase))) @@ -2461,6 +2463,7 @@ struct qla_hw_data { #define MIN_IOBASE_LEN 0x100 /* Multi queue data structs */ device_reg_t __iomem *mqiobase; + device_reg_t __iomem *msixbase; uint16_t msix_count; uint8_t mqenable; struct req_que **req_q_map; @@ -2494,6 +2497,7 @@ struct qla_hw_data { #define PORT_SPEED_2GB 0x01 #define PORT_SPEED_4GB 0x03 #define PORT_SPEED_8GB 0x04 +#define PORT_SPEED_16GB 0x05 #define PORT_SPEED_10GB 0x13 uint16_t link_data_rate; /* F/W operating speed */ @@ -2515,6 +2519,8 @@ struct qla_hw_data { #define PCI_DEVICE_ID_QLOGIC_ISP2532 0x2532 #define PCI_DEVICE_ID_QLOGIC_ISP8432 0x8432 #define PCI_DEVICE_ID_QLOGIC_ISP8001 0x8001 +#define PCI_DEVICE_ID_QLOGIC_ISP8031 0x8031 +#define PCI_DEVICE_ID_QLOGIC_ISP2031 0x2031 uint32_t device_type; #define DT_ISP2100 BIT_0 #define DT_ISP2200 BIT_1 @@ -2531,7 +2537,9 @@ struct qla_hw_data { #define DT_ISP8432 BIT_12 #define DT_ISP8001 BIT_13 #define DT_ISP8021 BIT_14 -#define DT_ISP_LAST (DT_ISP8021 << 1) +#define DT_ISP2031 BIT_15 +#define DT_ISP8031 BIT_16 +#define DT_ISP_LAST (DT_ISP8031 << 1) #define DT_T10_PI BIT_25 #define DT_IIDMA BIT_26 @@ -2555,26 +2563,30 @@ struct qla_hw_data { #define IS_QLA2532(ha) (DT_MASK(ha) & DT_ISP2532) #define IS_QLA8432(ha) (DT_MASK(ha) & DT_ISP8432) #define IS_QLA8001(ha) (DT_MASK(ha) & DT_ISP8001) +#define IS_QLA81XX(ha) (IS_QLA8001(ha)) #define IS_QLA82XX(ha) (DT_MASK(ha) & DT_ISP8021) +#define IS_QLA2031(ha) (DT_MASK(ha) & DT_ISP2031) +#define IS_QLA8031(ha) (DT_MASK(ha) & DT_ISP8031) #define IS_QLA23XX(ha) (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \ IS_QLA6312(ha) || IS_QLA6322(ha)) #define IS_QLA24XX(ha) (IS_QLA2422(ha) || IS_QLA2432(ha)) #define IS_QLA54XX(ha) (IS_QLA5422(ha) || IS_QLA5432(ha)) #define IS_QLA25XX(ha) (IS_QLA2532(ha)) +#define IS_QLA83XX(ha) (IS_QLA2031(ha) || IS_QLA8031(ha)) #define IS_QLA84XX(ha) (IS_QLA8432(ha)) #define IS_QLA24XX_TYPE(ha) (IS_QLA24XX(ha) || IS_QLA54XX(ha) || \ IS_QLA84XX(ha)) -#define IS_QLA81XX(ha) (IS_QLA8001(ha)) -#define IS_QLA8XXX_TYPE(ha) (IS_QLA81XX(ha) || IS_QLA82XX(ha)) +#define IS_CNA_CAPABLE(ha) (IS_QLA81XX(ha) || IS_QLA82XX(ha) || \ + IS_QLA8031(ha)) #define IS_QLA2XXX_MIDTYPE(ha) (IS_QLA24XX(ha) || IS_QLA84XX(ha) || \ IS_QLA25XX(ha) || IS_QLA81XX(ha) || \ - IS_QLA82XX(ha)) -#define IS_MSIX_NACK_CAPABLE(ha) (IS_QLA81XX(ha)) -#define IS_NOPOLLING_TYPE(ha) ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && \ - (ha)->flags.msix_enabled) -#define IS_FAC_REQUIRED(ha) (IS_QLA81XX(ha)) -#define IS_NOCACHE_VPD_TYPE(ha) (IS_QLA81XX(ha)) + IS_QLA82XX(ha) || IS_QLA83XX(ha)) +#define IS_MSIX_NACK_CAPABLE(ha) (IS_QLA81XX(ha) || IS_QLA83XX(ha)) +#define IS_NOPOLLING_TYPE(ha) ((IS_QLA25XX(ha) || IS_QLA81XX(ha) || \ + IS_QLA83XX(ha)) && (ha)->flags.msix_enabled) +#define IS_FAC_REQUIRED(ha) (IS_QLA81XX(ha) || IS_QLA83XX(ha)) +#define IS_NOCACHE_VPD_TYPE(ha) (IS_QLA81XX(ha) || IS_QLA83XX(ha)) #define IS_ALOGIO_CAPABLE(ha) (IS_QLA23XX(ha) || IS_FWI2_CAPABLE(ha)) #define IS_T10_PI_CAPABLE(ha) ((ha)->device_type & DT_T10_PI) @@ -2583,6 +2595,8 @@ struct qla_hw_data { #define IS_ZIO_SUPPORTED(ha) ((ha)->device_type & DT_ZIO_SUPPORTED) #define IS_OEM_001(ha) ((ha)->device_type & DT_OEM_001) #define HAS_EXTENDED_IDS(ha) ((ha)->device_type & DT_EXTENDED_IDS) +#define IS_CT6_SUPPORTED(ha) ((ha)->device_type & DT_CT6_SUPPORTED) +#define IS_MQUE_CAPABLE(ha) ((ha)->mqenable || IS_QLA83XX(ha)) /* HBA serial number */ uint8_t serial0; @@ -2674,6 +2688,8 @@ struct qla_hw_data { uint16_t fw_minor_version; uint16_t fw_subminor_version; uint16_t fw_attributes; + uint16_t fw_attributes_h; + uint16_t fw_attributes_ext[2]; uint32_t fw_memory_size; uint32_t fw_transfer_size; uint32_t fw_srisc_address; @@ -3021,6 +3037,7 @@ typedef struct scsi_qla_host { #define OPTROM_SIZE_25XX 0x200000 #define OPTROM_SIZE_81XX 0x400000 #define OPTROM_SIZE_82XX 0x800000 +#define OPTROM_SIZE_83XX 0x1000000 #define OPTROM_BURST_SIZE 0x1000 #define OPTROM_BURST_DWORDS (OPTROM_BURST_SIZE / 4) diff --git a/drivers/scsi/qla2xxx/qla_dfs.c b/drivers/scsi/qla2xxx/qla_dfs.c index 0b4c2b794c6..499c74e39ee 100644 --- a/drivers/scsi/qla2xxx/qla_dfs.c +++ b/drivers/scsi/qla2xxx/qla_dfs.c @@ -114,7 +114,7 @@ qla2x00_dfs_setup(scsi_qla_host_t *vha) { struct qla_hw_data *ha = vha->hw; - if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)) + if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha)) goto out; if (!ha->fce) goto out; diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index aa69486dc06..6d7d7758c79 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -1327,6 +1327,11 @@ struct qla_flt_header { #define FLT_REG_GOLD_FW 0x2f #define FLT_REG_FCP_PRIO_0 0x87 #define FLT_REG_FCP_PRIO_1 0x88 +#define FLT_REG_FCOE_FW 0xA4 +#define FLT_REG_FCOE_VPD_0 0xA9 +#define FLT_REG_FCOE_NVRAM_0 0xAA +#define FLT_REG_FCOE_VPD_1 0xAB +#define FLT_REG_FCOE_NVRAM_1 0xAC struct qla_flt_region { uint32_t code; @@ -1494,6 +1499,11 @@ struct access_chip_rsp_84xx { #define MBC_GET_XGMAC_STATS 0x7a #define MBC_GET_DCBX_PARAMS 0x51 +/* + * ISP83xx mailbox commands + */ +#define MBC_WRITE_REMOTE_REG 0x0001 /* Write remote register */ + /* Flash access control option field bit definitions */ #define FAC_OPT_FORCE_SEMAPHORE BIT_15 #define FAC_OPT_REQUESTOR_ID BIT_14 @@ -1875,4 +1885,7 @@ struct qla_fcp_prio_cfg { #define FA_NPIV_CONF0_ADDR_81 0xD1000 #define FA_NPIV_CONF1_ADDR_81 0xD2000 +/* 83XX Flash locations -- occupies second 8MB region. */ +#define FA_FLASH_LAYOUT_ADDR_83 0xFC400 + #endif diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 408679be8fd..362d49cbcb7 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -205,8 +205,7 @@ extern int qla2x00_execute_fw(scsi_qla_host_t *, uint32_t); extern int -qla2x00_get_fw_version(scsi_qla_host_t *, uint16_t *, uint16_t *, uint16_t *, - uint16_t *, uint32_t *, uint8_t *, uint32_t *, uint8_t *); +qla2x00_get_fw_version(scsi_qla_host_t *); extern int qla2x00_get_fw_options(scsi_qla_host_t *, uint16_t *); @@ -409,8 +408,10 @@ extern void qla2x00_beacon_blink(struct scsi_qla_host *); extern int qla24xx_beacon_on(struct scsi_qla_host *); extern int qla24xx_beacon_off(struct scsi_qla_host *); extern void qla24xx_beacon_blink(struct scsi_qla_host *); +extern void qla83xx_beacon_blink(struct scsi_qla_host *); extern int qla82xx_beacon_on(struct scsi_qla_host *); extern int qla82xx_beacon_off(struct scsi_qla_host *); +extern int qla83xx_write_remote_reg(struct scsi_qla_host *, uint32_t, uint32_t); extern uint8_t *qla2x00_read_optrom_data(struct scsi_qla_host *, uint8_t *, uint32_t, uint32_t); @@ -576,6 +577,8 @@ extern void qla82xx_start_iocbs(scsi_qla_host_t *); extern int qla82xx_fcoe_ctx_reset(scsi_qla_host_t *); extern int qla82xx_check_md_needed(scsi_qla_host_t *); extern void qla82xx_chip_reset_cleanup(scsi_qla_host_t *); +extern int qla81xx_set_led_config(scsi_qla_host_t *, uint16_t *); +extern int qla81xx_get_led_config(scsi_qla_host_t *, uint16_t *); extern int qla82xx_mbx_beacon_ctl(scsi_qla_host_t *, int); extern char *qdev_state(uint32_t); extern void qla82xx_clear_pending_mbx(scsi_qla_host_t *); @@ -589,6 +592,9 @@ extern int qla2x00_issue_iocb_timeout(scsi_qla_host_t *, void *, extern int qla2x00_get_idma_speed(scsi_qla_host_t *, uint16_t, uint16_t *, uint16_t *); +/* 83xx related functions */ +extern void qla83xx_fw_dump(scsi_qla_host_t *, int); + /* Minidump related functions */ extern int qla82xx_md_get_template_size(scsi_qla_host_t *); extern int qla82xx_md_get_template(scsi_qla_host_t *); diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index 4aea4ae2330..dd8339928a5 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -1547,7 +1547,7 @@ qla2x00_fdmi_rpa(scsi_qla_host_t *vha) eiter = (struct ct_fdmi_port_attr *) (entries + size); eiter->type = __constant_cpu_to_be16(FDMI_PORT_SUPPORT_SPEED); eiter->len = __constant_cpu_to_be16(4 + 4); - if (IS_QLA8XXX_TYPE(ha)) + if (IS_CNA_CAPABLE(ha)) eiter->a.sup_speed = __constant_cpu_to_be32( FDMI_PORT_SPEED_10GB); else if (IS_QLA25XX(ha)) @@ -1594,6 +1594,10 @@ qla2x00_fdmi_rpa(scsi_qla_host_t *vha) eiter->a.cur_speed = __constant_cpu_to_be32(FDMI_PORT_SPEED_10GB); break; + case PORT_SPEED_16GB: + eiter->a.cur_speed = + __constant_cpu_to_be32(FDMI_PORT_SPEED_16GB); + break; default: eiter->a.cur_speed = __constant_cpu_to_be32(FDMI_PORT_SPEED_UNKNOWN); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 68555dfee6a..38d865911ee 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -969,6 +969,9 @@ qla81xx_reset_mpi(scsi_qla_host_t *vha) { uint16_t mb[4] = {0x1010, 0, 1, 0}; + if (!IS_QLA81XX(vha->hw)) + return QLA_SUCCESS; + return qla81xx_write_mpi_register(vha, mb); } @@ -1262,7 +1265,9 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha) mem_size = (ha->fw_memory_size - 0x11000 + 1) * sizeof(uint16_t); } else if (IS_FWI2_CAPABLE(ha)) { - if (IS_QLA81XX(ha)) + if (IS_QLA83XX(ha)) + fixed_size = offsetof(struct qla83xx_fw_dump, ext_mem); + else if (IS_QLA81XX(ha)) fixed_size = offsetof(struct qla81xx_fw_dump, ext_mem); else if (IS_QLA25XX(ha)) fixed_size = offsetof(struct qla25xx_fw_dump, ext_mem); @@ -1271,7 +1276,8 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha) mem_size = (ha->fw_memory_size - 0x100000 + 1) * sizeof(uint32_t); if (ha->mqenable) { - mq_size = sizeof(struct qla2xxx_mq_chain); + if (!IS_QLA83XX(ha)) + mq_size = sizeof(struct qla2xxx_mq_chain); /* * Allocate maximum buffer size for all queues. * Resizing must be done at end-of-dump processing. @@ -1282,7 +1288,7 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha) (rsp->length * sizeof(response_t)); } /* Allocate memory for Fibre Channel Event Buffer. */ - if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)) + if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha)) goto try_eft; tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma, @@ -1493,17 +1499,8 @@ enable_82xx_npiv: fw_major_version = ha->fw_major_version; if (IS_QLA82XX(ha)) qla82xx_check_md_needed(vha); - else { - rval = qla2x00_get_fw_version(vha, - &ha->fw_major_version, - &ha->fw_minor_version, - &ha->fw_subminor_version, - &ha->fw_attributes, - &ha->fw_memory_size, - ha->mpi_version, - &ha->mpi_capabilities, - ha->phy_version); - } + else + rval = qla2x00_get_fw_version(vha); if (rval != QLA_SUCCESS) goto failed; ha->flags.npiv_supported = 0; @@ -1544,6 +1541,9 @@ enable_82xx_npiv: spin_unlock_irqrestore(&ha->hardware_lock, flags); } + if (IS_QLA83XX(ha)) + goto skip_fac_check; + if (rval == QLA_SUCCESS && IS_FAC_REQUIRED(ha)) { uint32_t size; @@ -1556,6 +1556,11 @@ enable_82xx_npiv: "Unsupported FAC firmware (%d.%02d.%02d).\n", ha->fw_major_version, ha->fw_minor_version, ha->fw_subminor_version); +skip_fac_check: + if (IS_QLA83XX(ha)) { + ha->flags.fac_supported = 0; + rval = QLA_SUCCESS; + } } } failed: @@ -1734,7 +1739,7 @@ qla24xx_config_rings(struct scsi_qla_host *vha) struct req_que *req = ha->req_q_map[0]; struct rsp_que *rsp = ha->rsp_q_map[0]; -/* Setup ring parameters in initialization control block. */ + /* Setup ring parameters in initialization control block. */ icb = (struct init_cb_24xx *)ha->init_cb; icb->request_q_outpointer = __constant_cpu_to_le16(0); icb->response_q_inpointer = __constant_cpu_to_le16(0); @@ -1745,7 +1750,7 @@ qla24xx_config_rings(struct scsi_qla_host *vha) icb->response_q_address[0] = cpu_to_le32(LSD(rsp->dma)); icb->response_q_address[1] = cpu_to_le32(MSD(rsp->dma)); - if (ha->mqenable) { + if (ha->mqenable || IS_QLA83XX(ha)) { icb->qos = __constant_cpu_to_le16(QLA_DEFAULT_QUE_QOS); icb->rid = __constant_cpu_to_le16(rid); if (ha->flags.msix_enabled) { @@ -1765,7 +1770,8 @@ qla24xx_config_rings(struct scsi_qla_host *vha) __constant_cpu_to_le32(BIT_18); /* Use Disable MSIX Handshake mode for capable adapters */ - if (IS_MSIX_NACK_CAPABLE(ha)) { + if ((ha->fw_attributes & BIT_6) && (IS_MSIX_NACK_CAPABLE(ha)) && + (ha->flags.msix_enabled)) { icb->firmware_options_2 &= __constant_cpu_to_le32(~BIT_22); ha->flags.disable_msix_handshake = 1; @@ -2037,7 +2043,7 @@ qla2x00_configure_hba(scsi_qla_host_t *vha) &loop_id, &al_pa, &area, &domain, &topo, &sw_cap); if (rval != QLA_SUCCESS) { if (LOOP_TRANSITION(vha) || atomic_read(&ha->loop_down_timer) || - IS_QLA8XXX_TYPE(ha) || + IS_CNA_CAPABLE(ha) || (rval == QLA_COMMAND_ERROR && loop_id == 0x7)) { ql_dbg(ql_dbg_disc, vha, 0x2008, "Loop is in a transition state.\n"); @@ -2129,7 +2135,7 @@ qla2x00_set_model_info(scsi_qla_host_t *vha, uint8_t *model, size_t len, uint16_t index; struct qla_hw_data *ha = vha->hw; int use_tbl = !IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && - !IS_QLA8XXX_TYPE(ha); + !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha); if (memcmp(model, BINZERO, len) != 0) { strncpy(ha->model_number, model, len); @@ -4109,15 +4115,8 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) ha->isp_abort_cnt = 0; clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); - if (IS_QLA81XX(ha)) - qla2x00_get_fw_version(vha, - &ha->fw_major_version, - &ha->fw_minor_version, - &ha->fw_subminor_version, - &ha->fw_attributes, &ha->fw_memory_size, - ha->mpi_version, &ha->mpi_capabilities, - ha->phy_version); - + if (IS_QLA81XX(ha) || IS_QLA8031(ha)) + qla2x00_get_fw_version(vha); if (ha->fce) { ha->flags.fce_enabled = 1; memset(ha->fce, 0, @@ -4983,7 +4982,6 @@ try_blob_fw: ql_log(ql_log_info, vha, 0x009a, "Update operational firmware.\n"); ha->flags.running_gold_fw = 1; - return rval; } @@ -5223,10 +5221,10 @@ qla81xx_nvram_config(scsi_qla_host_t *vha) nv->reset_delay = 5; nv->max_luns_per_target = __constant_cpu_to_le16(128); nv->port_down_retry_count = __constant_cpu_to_le16(30); - nv->link_down_timeout = __constant_cpu_to_le16(30); + nv->link_down_timeout = __constant_cpu_to_le16(180); nv->enode_mac[0] = 0x00; - nv->enode_mac[1] = 0x02; - nv->enode_mac[2] = 0x03; + nv->enode_mac[1] = 0xC0; + nv->enode_mac[2] = 0xDD; nv->enode_mac[3] = 0x04; nv->enode_mac[4] = 0x05; nv->enode_mac[5] = 0x06 + ha->port_no; @@ -5362,6 +5360,10 @@ qla81xx_nvram_config(scsi_qla_host_t *vha) if (ql2xloginretrycount) ha->login_retry_count = ql2xloginretrycount; + /* if not running MSI-X we need handshaking on interrupts */ + if (!vha->hw->flags.msix_enabled && IS_QLA83XX(ha)) + icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_22); + /* Enable ZIO. */ if (!vha->flags.init_done) { ha->zio_mode = le32_to_cpu(icb->firmware_options_2) & diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 55a96761b5a..a281b5422df 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -473,7 +473,6 @@ qla2x00_start_iocbs(struct scsi_qla_host *vha, struct req_que *req) { struct qla_hw_data *ha = vha->hw; device_reg_t __iomem *reg = ISP_QUE_REG(ha, req->id); - struct device_reg_2xxx __iomem *ioreg = &ha->iobase->isp; if (IS_QLA82XX(ha)) { qla82xx_start_iocbs(vha); @@ -487,9 +486,9 @@ qla2x00_start_iocbs(struct scsi_qla_host *vha, struct req_que *req) req->ring_ptr++; /* Set chip new ring index. */ - if (ha->mqenable) { - WRT_REG_DWORD(®->isp25mq.req_q_in, req->ring_index); - RD_REG_DWORD(&ioreg->hccr); + if (ha->mqenable || IS_QLA83XX(ha)) { + WRT_REG_DWORD(req->req_q_in, req->ring_index); + RD_REG_DWORD_RELAXED(®->isp24.req_q_in); } else if (IS_FWI2_CAPABLE(ha)) { WRT_REG_DWORD(®->isp24.req_q_in, req->ring_index); RD_REG_DWORD_RELAXED(®->isp24.req_q_in); @@ -1856,7 +1855,7 @@ qla2x00_alloc_iocbs(scsi_qla_host_t *vha, srb_t *sp) skip_cmd_array: /* Check for room on request queue. */ if (req->cnt < req_cnt) { - if (ha->mqenable) + if (ha->mqenable || IS_QLA83XX(ha)) cnt = RD_REG_DWORD(®->isp25mq.req_q_out); else if (IS_QLA82XX(ha)) cnt = RD_REG_DWORD(®->isp82.req_q_out); diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 349843ea32f..18e7d961aa0 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -289,7 +289,7 @@ qla81xx_idc_event(scsi_qla_host_t *vha, uint16_t aen, uint16_t descr) mb[cnt] = RD_REG_WORD(wptr); ql_dbg(ql_dbg_async, vha, 0x5021, - "Inter-Driver Commucation %s -- " + "Inter-Driver Communication %s -- " "%04x %04x %04x %04x %04x %04x %04x.\n", event[aen & 0xff], mb[0], mb[1], mb[2], mb[3], mb[4], mb[5], mb[6]); @@ -318,7 +318,7 @@ void qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb) { #define LS_UNKNOWN 2 - static char *link_speeds[] = { "1", "2", "?", "4", "8", "10" }; + static char *link_speeds[] = { "1", "2", "?", "4", "8", "16", "10" }; char *link_speed; uint16_t handle_cnt; uint16_t cnt, mbx; @@ -333,7 +333,7 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb) /* Setup to process RIO completion. */ handle_cnt = 0; - if (IS_QLA8XXX_TYPE(ha)) + if (IS_CNA_CAPABLE(ha)) goto skip_rio; switch (mb[0]) { case MBA_SCSI_COMPLETION: @@ -405,7 +405,8 @@ skip_rio: break; case MBA_SYSTEM_ERR: /* System Error */ - mbx = IS_QLA81XX(ha) ? RD_REG_WORD(®24->mailbox7) : 0; + mbx = (IS_QLA81XX(ha) || IS_QLA83XX(ha)) ? + RD_REG_WORD(®24->mailbox7) : 0; ql_log(ql_log_warn, vha, 0x5003, "ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh " "mbx7=%xh.\n", mb[1], mb[2], mb[3], mbx); @@ -418,6 +419,7 @@ skip_rio: "Unrecoverable Hardware Error: adapter " "marked OFFLINE!\n"); vha->flags.online = 0; + vha->device_flags |= DFLG_DEV_FAILED; } else { /* Check to see if MPI timeout occurred */ if ((mbx & MBX_3) && (ha->flags.port0)) @@ -431,6 +433,7 @@ skip_rio: "Unrecoverable Hardware Error: adapter marked " "OFFLINE!\n"); vha->flags.online = 0; + vha->device_flags |= DFLG_DEV_FAILED; } else set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); break; @@ -482,10 +485,10 @@ skip_rio: ha->link_data_rate = PORT_SPEED_1GB; } else { link_speed = link_speeds[LS_UNKNOWN]; - if (mb[1] < 5) + if (mb[1] < 6) link_speed = link_speeds[mb[1]]; else if (mb[1] == 0x13) - link_speed = link_speeds[5]; + link_speed = link_speeds[6]; ha->link_data_rate = mb[1]; } @@ -497,7 +500,8 @@ skip_rio: break; case MBA_LOOP_DOWN: /* Loop Down Event */ - mbx = IS_QLA81XX(ha) ? RD_REG_WORD(®24->mailbox4) : 0; + mbx = (IS_QLA81XX(ha) || IS_QLA8031(ha)) + ? RD_REG_WORD(®24->mailbox4) : 0; mbx = IS_QLA82XX(ha) ? RD_REG_WORD(®82->mailbox_out[4]) : mbx; ql_dbg(ql_dbg_async, vha, 0x500b, "LOOP DOWN detected (%x %x %x %x).\n", @@ -547,7 +551,7 @@ skip_rio: if (IS_QLA2100(ha)) break; - if (IS_QLA8XXX_TYPE(ha)) { + if (IS_QLA81XX(ha) || IS_QLA82XX(ha) || IS_QLA8031(ha)) { ql_dbg(ql_dbg_async, vha, 0x500d, "DCBX Completed -- %04x %04x %04x.\n", mb[1], mb[2], mb[3]); @@ -809,6 +813,10 @@ skip_rio: case MBA_IDC_TIME_EXT: qla81xx_idc_event(vha, mb[0], mb[1]); break; + default: + ql_dbg(ql_dbg_async, vha, 0x5057, + "Unknown AEN:%04x %04x %04x %04x\n", + mb[0], mb[1], mb[2], mb[3]); } if (!vha->vp_idx && ha->num_vhosts) @@ -2127,7 +2135,7 @@ qla2xxx_check_risc_status(scsi_qla_host_t *vha) struct qla_hw_data *ha = vha->hw; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; - if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)) + if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha)) return; rval = QLA_SUCCESS; @@ -2168,7 +2176,7 @@ done: } /** - * qla24xx_intr_handler() - Process interrupts for the ISP23xx and ISP63xx. + * qla24xx_intr_handler() - Process interrupts for the ISP23xx and ISP24xx. * @irq: * @dev_id: SCSI driver HA context * @@ -2530,8 +2538,14 @@ msix_failed: } /* Enable MSI-X vector for response queue update for queue 0 */ - if (ha->mqiobase && (ha->max_rsp_queues > 1 || ha->max_req_queues > 1)) - ha->mqenable = 1; + if (IS_QLA83XX(ha)) { + if (ha->msixbase && ha->mqiobase && + (ha->max_rsp_queues > 1 || ha->max_req_queues > 1)) + ha->mqenable = 1; + } else + if (ha->mqiobase + && (ha->max_rsp_queues > 1 || ha->max_req_queues > 1)) + ha->mqenable = 1; ql_dbg(ql_dbg_multiq, vha, 0xc005, "mqiobase=%p, max_rsp_queues=%d, max_req_queues=%d.\n", ha->mqiobase, ha->max_rsp_queues, ha->max_req_queues); @@ -2552,8 +2566,8 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp) scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); /* If possible, enable MSI-X. */ - if (!IS_QLA2432(ha) && !IS_QLA2532(ha) && - !IS_QLA8432(ha) && !IS_QLA8XXX_TYPE(ha)) + if (!IS_QLA2432(ha) && !IS_QLA2532(ha) && !IS_QLA8432(ha) && + !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha)) goto skip_msi; if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP && @@ -2615,7 +2629,7 @@ clear_risc_ints: * FIXME: Noted that 8014s were being dropped during NK testing. * Timing deltas during MSI-X/INTa transitions? */ - if (IS_QLA81XX(ha) || IS_QLA82XX(ha)) + if (IS_QLA81XX(ha) || IS_QLA82XX(ha) || IS_QLA83XX(ha)) goto fail; spin_lock_irq(&ha->hardware_lock); if (IS_FWI2_CAPABLE(ha)) { diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 08f1d01bdc1..be520a9d0b7 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -364,8 +364,8 @@ premature_exit: mbx_done: if (rval) { ql_dbg(ql_dbg_mbx, base_vha, 0x1020, - "**** Failed mbx[0]=%x, mb[1]=%x, mb[2]=%x, cmd=%x ****.\n", - mcp->mb[0], mcp->mb[1], mcp->mb[2], command); + "**** Failed mbx[0]=%x, mb[1]=%x, mb[2]=%x, mb[3]=%x, cmd=%x ****.\n", + mcp->mb[0], mcp->mb[1], mcp->mb[2], mcp->mb[3], command); } else { ql_dbg(ql_dbg_mbx, base_vha, 0x1021, "Done %s.\n", __func__); } @@ -455,7 +455,7 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr) mcp->mb[1] = MSW(risc_addr); mcp->mb[2] = LSW(risc_addr); mcp->mb[3] = 0; - if (IS_QLA81XX(ha)) { + if (IS_QLA81XX(ha) || IS_QLA83XX(ha)) { struct nvram_81xx *nv = ha->nvram; mcp->mb[4] = (nv->enhanced_features & EXTENDED_BB_CREDITS); @@ -508,21 +508,22 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr) * Kernel context. */ int -qla2x00_get_fw_version(scsi_qla_host_t *vha, uint16_t *major, uint16_t *minor, - uint16_t *subminor, uint16_t *attributes, uint32_t *memory, uint8_t *mpi, - uint32_t *mpi_caps, uint8_t *phy) +qla2x00_get_fw_version(scsi_qla_host_t *vha) { int rval; mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; + struct qla_hw_data *ha = vha->hw; ql_dbg(ql_dbg_mbx, vha, 0x1029, "Entered %s.\n", __func__); mcp->mb[0] = MBC_GET_FIRMWARE_VERSION; mcp->out_mb = MBX_0; mcp->in_mb = MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; - if (IS_QLA81XX(vha->hw)) + if (IS_QLA81XX(vha->hw) || IS_QLA8031(ha)) mcp->in_mb |= MBX_13|MBX_12|MBX_11|MBX_10|MBX_9|MBX_8; + if (IS_QLA83XX(vha->hw)) + mcp->in_mb |= MBX_17|MBX_16|MBX_15; mcp->flags = 0; mcp->tov = MBX_TOV_SECONDS; rval = qla2x00_mailbox_command(vha, mcp); @@ -530,23 +531,37 @@ qla2x00_get_fw_version(scsi_qla_host_t *vha, uint16_t *major, uint16_t *minor, goto failed; /* Return mailbox data. */ - *major = mcp->mb[1]; - *minor = mcp->mb[2]; - *subminor = mcp->mb[3]; - *attributes = mcp->mb[6]; + ha->fw_major_version = mcp->mb[1]; + ha->fw_minor_version = mcp->mb[2]; + ha->fw_subminor_version = mcp->mb[3]; + ha->fw_attributes = mcp->mb[6]; if (IS_QLA2100(vha->hw) || IS_QLA2200(vha->hw)) - *memory = 0x1FFFF; /* Defaults to 128KB. */ + ha->fw_memory_size = 0x1FFFF; /* Defaults to 128KB. */ else - *memory = (mcp->mb[5] << 16) | mcp->mb[4]; - if (IS_QLA81XX(vha->hw)) { - mpi[0] = mcp->mb[10] & 0xff; - mpi[1] = mcp->mb[11] >> 8; - mpi[2] = mcp->mb[11] & 0xff; - *mpi_caps = (mcp->mb[12] << 16) | mcp->mb[13]; - phy[0] = mcp->mb[8] & 0xff; - phy[1] = mcp->mb[9] >> 8; - phy[2] = mcp->mb[9] & 0xff; + ha->fw_memory_size = (mcp->mb[5] << 16) | mcp->mb[4]; + if (IS_QLA81XX(vha->hw) || IS_QLA8031(vha->hw)) { + ha->mpi_version[0] = mcp->mb[10] & 0xff; + ha->mpi_version[1] = mcp->mb[11] >> 8; + ha->mpi_version[2] = mcp->mb[11] & 0xff; + ha->mpi_capabilities = (mcp->mb[12] << 16) | mcp->mb[13]; + ha->phy_version[0] = mcp->mb[8] & 0xff; + ha->phy_version[1] = mcp->mb[9] >> 8; + ha->phy_version[2] = mcp->mb[9] & 0xff; + } + if (IS_QLA83XX(ha)) { + if (mcp->mb[6] & BIT_15) { + ha->fw_attributes_h = mcp->mb[15]; + ha->fw_attributes_ext[0] = mcp->mb[16]; + ha->fw_attributes_ext[1] = mcp->mb[17]; + ql_dbg(ql_dbg_mbx, vha, 0x1139, + "%s: FW_attributes Upper: 0x%x, Lower: 0x%x.\n", + __func__, mcp->mb[15], mcp->mb[6]); + } else + ql_dbg(ql_dbg_mbx, vha, 0x112f, + "%s: FwAttributes [Upper] invalid, MB6:%04x\n", + __func__, mcp->mb[6]); } + failed: if (rval != QLA_SUCCESS) { /*EMPTY*/ @@ -1028,7 +1043,7 @@ qla2x00_get_adapter_id(scsi_qla_host_t *vha, uint16_t *id, uint8_t *al_pa, mcp->mb[9] = vha->vp_idx; mcp->out_mb = MBX_9|MBX_0; mcp->in_mb = MBX_9|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; - if (IS_QLA8XXX_TYPE(vha->hw)) + if (IS_CNA_CAPABLE(vha->hw)) mcp->in_mb |= MBX_13|MBX_12|MBX_11|MBX_10; mcp->tov = MBX_TOV_SECONDS; mcp->flags = 0; @@ -1052,7 +1067,7 @@ qla2x00_get_adapter_id(scsi_qla_host_t *vha, uint16_t *id, uint8_t *al_pa, } else { ql_dbg(ql_dbg_mbx, vha, 0x1048, "Done %s.\n", __func__); - if (IS_QLA8XXX_TYPE(vha->hw)) { + if (IS_CNA_CAPABLE(vha->hw)) { vha->fcoe_vlan_id = mcp->mb[9] & 0xfff; vha->fcoe_fcf_idx = mcp->mb[10]; vha->fcoe_vn_port_mac[5] = mcp->mb[11] >> 8; @@ -1163,7 +1178,7 @@ qla2x00_init_firmware(scsi_qla_host_t *vha, uint16_t size) mcp->mb[6] = MSW(MSD(ha->init_cb_dma)); mcp->mb[7] = LSW(MSD(ha->init_cb_dma)); mcp->out_mb = MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; - if (IS_QLA81XX(ha) && ha->ex_init_cb->ex_version) { + if ((IS_QLA81XX(ha) || IS_QLA83XX(ha)) && ha->ex_init_cb->ex_version) { mcp->mb[1] = BIT_0; mcp->mb[10] = MSW(ha->ex_init_cb_dma); mcp->mb[11] = LSW(ha->ex_init_cb_dma); @@ -1172,7 +1187,11 @@ qla2x00_init_firmware(scsi_qla_host_t *vha, uint16_t size) mcp->mb[14] = sizeof(*ha->ex_init_cb); mcp->out_mb |= MBX_14|MBX_13|MBX_12|MBX_11|MBX_10; } - mcp->in_mb = MBX_0; + /* 1 and 2 should normally be captured. */ + mcp->in_mb = MBX_2|MBX_1|MBX_0; + if (IS_QLA83XX(ha)) + /* mb3 is additional info about the installed SFP. */ + mcp->in_mb |= MBX_3; mcp->buf_size = size; mcp->flags = MBX_DMA_OUT; mcp->tov = MBX_TOV_SECONDS; @@ -1181,7 +1200,8 @@ qla2x00_init_firmware(scsi_qla_host_t *vha, uint16_t size) if (rval != QLA_SUCCESS) { /*EMPTY*/ ql_dbg(ql_dbg_mbx, vha, 0x104d, - "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]); + "Failed=%x mb[0]=%x, mb[1]=%x, mb[2]=%x, mb[3]=%x,.\n", + rval, mcp->mb[0], mcp->mb[1], mcp->mb[2], mcp->mb[3]); } else { /*EMPTY*/ ql_dbg(ql_dbg_mbx, vha, 0x104e, "Done %s.\n", __func__); @@ -1481,7 +1501,7 @@ qla2x00_lip_reset(scsi_qla_host_t *vha) ql_dbg(ql_dbg_mbx, vha, 0x105a, "Entered %s.\n", __func__); - if (IS_QLA8XXX_TYPE(vha->hw)) { + if (IS_CNA_CAPABLE(vha->hw)) { /* Logout across all FCFs. */ mcp->mb[0] = MBC_LIP_FULL_LOGIN; mcp->mb[1] = BIT_1; @@ -2094,7 +2114,7 @@ qla2x00_get_resource_cnts(scsi_qla_host_t *vha, uint16_t *cur_xchg_cnt, mcp->mb[0] = MBC_GET_RESOURCE_COUNTS; mcp->out_mb = MBX_0; mcp->in_mb = MBX_11|MBX_10|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; - if (IS_QLA81XX(vha->hw)) + if (IS_QLA81XX(vha->hw) || IS_QLA83XX(vha->hw)) mcp->in_mb |= MBX_12; mcp->tov = MBX_TOV_SECONDS; mcp->flags = 0; @@ -2121,7 +2141,7 @@ qla2x00_get_resource_cnts(scsi_qla_host_t *vha, uint16_t *cur_xchg_cnt, *orig_iocb_cnt = mcp->mb[10]; if (vha->hw->flags.npiv_supported && max_npiv_vports) *max_npiv_vports = mcp->mb[11]; - if (IS_QLA81XX(vha->hw) && max_fcfs) + if ((IS_QLA81XX(vha->hw) || IS_QLA83XX(vha->hw)) && max_fcfs) *max_fcfs = mcp->mb[12]; } @@ -2686,7 +2706,8 @@ qla2x00_enable_fce_trace(scsi_qla_host_t *vha, dma_addr_t fce_dma, ql_dbg(ql_dbg_mbx, vha, 0x10aa, "Entered %s.\n", __func__); - if (!IS_QLA25XX(vha->hw) && !IS_QLA81XX(vha->hw)) + if (!IS_QLA25XX(vha->hw) && !IS_QLA81XX(vha->hw) && + !IS_QLA83XX(vha->hw)) return QLA_FUNCTION_FAILED; if (unlikely(pci_channel_offline(vha->hw->pdev))) @@ -2828,7 +2849,7 @@ qla2x00_set_idma_speed(scsi_qla_host_t *vha, uint16_t loop_id, mcp->mb[0] = MBC_PORT_PARAMS; mcp->mb[1] = loop_id; mcp->mb[2] = BIT_0; - if (IS_QLA8XXX_TYPE(vha->hw)) + if (IS_CNA_CAPABLE(vha->hw)) mcp->mb[3] = port_speed & (BIT_5|BIT_4|BIT_3|BIT_2|BIT_1|BIT_0); else mcp->mb[3] = port_speed & (BIT_2|BIT_1|BIT_0); @@ -3298,6 +3319,8 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req) mcp->mb[12] = req->qos; mcp->mb[11] = req->vp_idx; mcp->mb[13] = req->rid; + if (IS_QLA83XX(ha)) + mcp->mb[15] = 0; reg = (struct device_reg_25xxmq *)((void *)(ha->mqiobase) + QLA_QUE_PAGE * req->id); @@ -3311,12 +3334,21 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req) MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; mcp->in_mb = MBX_0; mcp->flags = MBX_DMA_OUT; - mcp->tov = 60; + mcp->tov = MBX_TOV_SECONDS * 2; + + if (IS_QLA81XX(ha) || IS_QLA83XX(ha)) + mcp->in_mb |= MBX_1; + if (IS_QLA83XX(ha)) { + mcp->out_mb |= MBX_15; + /* debug q create issue in SR-IOV */ + mcp->in_mb |= MBX_9 | MBX_8 | MBX_7; + } spin_lock_irqsave(&ha->hardware_lock, flags); if (!(req->options & BIT_0)) { WRT_REG_DWORD(®->req_q_in, 0); - WRT_REG_DWORD(®->req_q_out, 0); + if (!IS_QLA83XX(ha)) + WRT_REG_DWORD(®->req_q_out, 0); } req->req_q_in = ®->req_q_in; req->req_q_out = ®->req_q_out; @@ -3354,6 +3386,8 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp) mcp->mb[5] = rsp->length; mcp->mb[14] = rsp->msix->entry; mcp->mb[13] = rsp->rid; + if (IS_QLA83XX(ha)) + mcp->mb[15] = 0; reg = (struct device_reg_25xxmq *)((void *)(ha->mqiobase) + QLA_QUE_PAGE * rsp->id); @@ -3367,12 +3401,23 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp) |MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; mcp->in_mb = MBX_0; mcp->flags = MBX_DMA_OUT; - mcp->tov = 60; + mcp->tov = MBX_TOV_SECONDS * 2; + + if (IS_QLA81XX(ha)) { + mcp->out_mb |= MBX_12|MBX_11|MBX_10; + mcp->in_mb |= MBX_1; + } else if (IS_QLA83XX(ha)) { + mcp->out_mb |= MBX_15|MBX_12|MBX_11|MBX_10; + mcp->in_mb |= MBX_1; + /* debug q create issue in SR-IOV */ + mcp->in_mb |= MBX_9 | MBX_8 | MBX_7; + } spin_lock_irqsave(&ha->hardware_lock, flags); if (!(rsp->options & BIT_0)) { WRT_REG_DWORD(®->rsp_q_out, 0); - WRT_REG_DWORD(®->rsp_q_in, 0); + if (!IS_QLA83XX(ha)) + WRT_REG_DWORD(®->rsp_q_in, 0); } spin_unlock_irqrestore(&ha->hardware_lock, flags); @@ -3424,7 +3469,7 @@ qla81xx_fac_get_sector_size(scsi_qla_host_t *vha, uint32_t *sector_size) ql_dbg(ql_dbg_mbx, vha, 0x10dc, "Entered %s.\n", __func__); - if (!IS_QLA81XX(vha->hw)) + if (!IS_QLA81XX(vha->hw) && !IS_QLA83XX(vha->hw)) return QLA_FUNCTION_FAILED; mcp->mb[0] = MBC_FLASH_ACCESS_CTRL; @@ -3454,7 +3499,7 @@ qla81xx_fac_do_write_enable(scsi_qla_host_t *vha, int enable) mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - if (!IS_QLA81XX(vha->hw)) + if (!IS_QLA81XX(vha->hw) && !IS_QLA83XX(vha->hw)) return QLA_FUNCTION_FAILED; ql_dbg(ql_dbg_mbx, vha, 0x10df, "Entered %s.\n", __func__); @@ -3486,7 +3531,7 @@ qla81xx_fac_erase_sector(scsi_qla_host_t *vha, uint32_t start, uint32_t finish) mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - if (!IS_QLA81XX(vha->hw)) + if (!IS_QLA81XX(vha->hw) && !IS_QLA83XX(vha->hw)) return QLA_FUNCTION_FAILED; ql_dbg(ql_dbg_mbx, vha, 0x10e2, "Entered %s.\n", __func__); @@ -3641,7 +3686,7 @@ qla2x00_get_xgmac_stats(scsi_qla_host_t *vha, dma_addr_t stats_dma, ql_dbg(ql_dbg_mbx, vha, 0x10ee, "Entered %s.\n", __func__); - if (!IS_QLA8XXX_TYPE(vha->hw)) + if (!IS_CNA_CAPABLE(vha->hw)) return QLA_FUNCTION_FAILED; mcp->mb[0] = MBC_GET_XGMAC_STATS; @@ -3680,7 +3725,7 @@ qla2x00_get_dcbx_params(scsi_qla_host_t *vha, dma_addr_t tlv_dma, ql_dbg(ql_dbg_mbx, vha, 0x10f1, "Entered %s.\n", __func__); - if (!IS_QLA8XXX_TYPE(vha->hw)) + if (!IS_CNA_CAPABLE(vha->hw)) return QLA_FUNCTION_FAILED; mcp->mb[0] = MBC_GET_DCBX_PARAMS; @@ -3775,7 +3820,7 @@ qla2x00_loopback_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, mcp->out_mb = MBX_21|MBX_20|MBX_19|MBX_18|MBX_17|MBX_16|MBX_15| MBX_14|MBX_13|MBX_12|MBX_11|MBX_10|MBX_7|MBX_6|MBX_1|MBX_0; - if (IS_QLA8XXX_TYPE(vha->hw)) + if (IS_CNA_CAPABLE(vha->hw)) mcp->out_mb |= MBX_2; mcp->in_mb = MBX_19|MBX_18|MBX_3|MBX_2|MBX_1|MBX_0; @@ -3813,7 +3858,7 @@ qla2x00_echo_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, memset(mcp->mb, 0 , sizeof(mcp->mb)); mcp->mb[0] = MBC_DIAGNOSTIC_ECHO; mcp->mb[1] = mreq->options | BIT_6; /* BIT_6 specifies 64bit address */ - if (IS_QLA8XXX_TYPE(ha)) { + if (IS_CNA_CAPABLE(ha)) { mcp->mb[1] |= BIT_15; mcp->mb[2] = vha->fcoe_fcf_idx; } @@ -3831,13 +3876,14 @@ qla2x00_echo_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq, mcp->out_mb = MBX_21|MBX_20|MBX_17|MBX_16|MBX_15| MBX_14|MBX_10|MBX_7|MBX_6|MBX_1|MBX_0; - if (IS_QLA8XXX_TYPE(ha)) + if (IS_CNA_CAPABLE(ha)) mcp->out_mb |= MBX_2; mcp->in_mb = MBX_0; - if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha) || IS_QLA8XXX_TYPE(ha)) + if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha) || + IS_CNA_CAPABLE(ha) || IS_QLA2031(ha)) mcp->in_mb |= MBX_1; - if (IS_QLA8XXX_TYPE(ha)) + if (IS_CNA_CAPABLE(ha) || IS_QLA2031(ha)) mcp->in_mb |= MBX_3; mcp->tov = MBX_TOV_SECONDS; @@ -3976,6 +4022,7 @@ qla81xx_write_mpi_register(scsi_qla_host_t *vha, uint16_t *mb) return rval; } + int qla2x00_get_data_rate(scsi_qla_host_t *vha) { @@ -3993,6 +4040,8 @@ qla2x00_get_data_rate(scsi_qla_host_t *vha) mcp->mb[1] = 0; mcp->out_mb = MBX_1|MBX_0; mcp->in_mb = MBX_2|MBX_1|MBX_0; + if (IS_QLA83XX(ha)) + mcp->in_mb |= MBX_3; mcp->tov = MBX_TOV_SECONDS; mcp->flags = 0; rval = qla2x00_mailbox_command(vha, mcp); @@ -4018,7 +4067,7 @@ qla81xx_get_port_config(scsi_qla_host_t *vha, uint16_t *mb) ql_dbg(ql_dbg_mbx, vha, 0x1109, "Entered %s.\n", __func__); - if (!IS_QLA81XX(ha)) + if (!IS_QLA81XX(ha) && !IS_QLA83XX(ha)) return QLA_FUNCTION_FAILED; mcp->mb[0] = MBC_GET_PORT_CONFIG; mcp->out_mb = MBX_0; @@ -4298,6 +4347,90 @@ qla82xx_md_get_template(scsi_qla_host_t *vha) return rval; } +int +qla81xx_set_led_config(scsi_qla_host_t *vha, uint16_t *led_cfg) +{ + int rval; + struct qla_hw_data *ha = vha->hw; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + if (!IS_QLA81XX(ha) && !IS_QLA8031(ha)) + return QLA_FUNCTION_FAILED; + + ql_dbg(ql_dbg_mbx, vha, 0x1133, "Entered %s.\n", __func__); + + memset(mcp, 0, sizeof(mbx_cmd_t)); + mcp->mb[0] = MBC_SET_LED_CONFIG; + mcp->mb[1] = led_cfg[0]; + mcp->mb[2] = led_cfg[1]; + if (IS_QLA8031(ha)) { + mcp->mb[3] = led_cfg[2]; + mcp->mb[4] = led_cfg[3]; + mcp->mb[5] = led_cfg[4]; + mcp->mb[6] = led_cfg[5]; + } + + mcp->out_mb = MBX_2|MBX_1|MBX_0; + if (IS_QLA8031(ha)) + mcp->out_mb |= MBX_6|MBX_5|MBX_4|MBX_3; + mcp->in_mb = MBX_0; + mcp->tov = 30; + mcp->flags = 0; + + rval = qla2x00_mailbox_command(vha, mcp); + if (rval != QLA_SUCCESS) { + ql_dbg(ql_dbg_mbx, vha, 0x1134, + "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]); + } else { + ql_dbg(ql_dbg_mbx, vha, 0x1135, "Done %s.\n", __func__); + } + + return rval; +} + +int +qla81xx_get_led_config(scsi_qla_host_t *vha, uint16_t *led_cfg) +{ + int rval; + struct qla_hw_data *ha = vha->hw; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + if (!IS_QLA81XX(ha) && !IS_QLA8031(ha)) + return QLA_FUNCTION_FAILED; + + ql_dbg(ql_dbg_mbx, vha, 0x1136, "Entered %s.\n", __func__); + + memset(mcp, 0, sizeof(mbx_cmd_t)); + mcp->mb[0] = MBC_GET_LED_CONFIG; + + mcp->out_mb = MBX_0; + mcp->in_mb = MBX_2|MBX_1|MBX_0; + if (IS_QLA8031(ha)) + mcp->in_mb |= MBX_6|MBX_5|MBX_4|MBX_3; + mcp->tov = 30; + mcp->flags = 0; + + rval = qla2x00_mailbox_command(vha, mcp); + if (rval != QLA_SUCCESS) { + ql_dbg(ql_dbg_mbx, vha, 0x1137, + "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]); + } else { + led_cfg[0] = mcp->mb[1]; + led_cfg[1] = mcp->mb[2]; + if (IS_QLA8031(ha)) { + led_cfg[2] = mcp->mb[3]; + led_cfg[3] = mcp->mb[4]; + led_cfg[4] = mcp->mb[5]; + led_cfg[5] = mcp->mb[6]; + } + ql_dbg(ql_dbg_mbx, vha, 0x1138, "Done %s.\n", __func__); + } + + return rval; +} + int qla82xx_mbx_beacon_ctl(scsi_qla_host_t *vha, int enable) { @@ -4321,7 +4454,7 @@ qla82xx_mbx_beacon_ctl(scsi_qla_host_t *vha, int enable) mcp->out_mb = MBX_7|MBX_0; mcp->in_mb = MBX_0; - mcp->tov = 30; + mcp->tov = MBX_TOV_SECONDS; mcp->flags = 0; rval = qla2x00_mailbox_command(vha, mcp); @@ -4335,3 +4468,38 @@ qla82xx_mbx_beacon_ctl(scsi_qla_host_t *vha, int enable) return rval; } + +int +qla83xx_write_remote_reg(scsi_qla_host_t *vha, uint32_t reg, uint32_t data) +{ + int rval; + struct qla_hw_data *ha = vha->hw; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + if (!IS_QLA83XX(ha)) + return QLA_FUNCTION_FAILED; + + ql_dbg(ql_dbg_mbx, vha, 0x1130, "Entered %s.\n", __func__); + + mcp->mb[0] = MBC_WRITE_REMOTE_REG; + mcp->mb[1] = LSW(reg); + mcp->mb[2] = MSW(reg); + mcp->mb[3] = LSW(data); + mcp->mb[4] = MSW(data); + mcp->out_mb = MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; + + mcp->in_mb = MBX_1|MBX_0; + mcp->tov = MBX_TOV_SECONDS; + mcp->flags = 0; + rval = qla2x00_mailbox_command(vha, mcp); + + if (rval != QLA_SUCCESS) { + ql_dbg(ql_dbg_mbx, vha, 0x1131, + "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]); + } else { + ql_dbg(ql_dbg_mbx, vha, 0x1132, + "Done %s.\n", __func__); + } + return rval; +} diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 270ba3130fd..34fb91904fd 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -3136,12 +3136,7 @@ qla82xx_check_md_needed(scsi_qla_host_t *vha) fw_minor_version = ha->fw_minor_version; fw_subminor_version = ha->fw_subminor_version; - rval = qla2x00_get_fw_version(vha, &ha->fw_major_version, - &ha->fw_minor_version, &ha->fw_subminor_version, - &ha->fw_attributes, &ha->fw_memory_size, - ha->mpi_version, &ha->mpi_capabilities, - ha->phy_version); - + rval = qla2x00_get_fw_version(vha); if (rval != QLA_SUCCESS) return rval; @@ -3150,7 +3145,6 @@ qla82xx_check_md_needed(scsi_qla_host_t *vha) if (fw_major_version != ha->fw_major_version || fw_minor_version != ha->fw_minor_version || fw_subminor_version != ha->fw_subminor_version) { - ql_log(ql_log_info, vha, 0xb02d, "Firmware version differs " "Previous version: %d:%d:%d - " diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h index 57a226be339..4ac50e27466 100644 --- a/drivers/scsi/qla2xxx/qla_nx.h +++ b/drivers/scsi/qla2xxx/qla_nx.h @@ -888,7 +888,8 @@ struct ct6_dsd { }; #define MBC_TOGGLE_INTERRUPT 0x10 -#define MBC_SET_LED_CONFIG 0x125 +#define MBC_SET_LED_CONFIG 0x125 /* FCoE specific LED control */ +#define MBC_GET_LED_CONFIG 0x126 /* FCoE specific LED control */ /* Flash offset */ #define FLT_REG_BOOTLOAD_82XX 0x72 diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 036030c9533..79c752eef99 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1219,7 +1219,7 @@ qla2x00_loop_reset(scsi_qla_host_t *vha) } } - if (ha->flags.enable_lip_full_login && !IS_QLA8XXX_TYPE(ha)) { + if (ha->flags.enable_lip_full_login && !IS_CNA_CAPABLE(ha)) { ret = qla2x00_full_login_lip(vha); if (ret != QLA_SUCCESS) { ql_dbg(ql_dbg_taskm, vha, 0x802d, @@ -1488,9 +1488,6 @@ qla2x00_iospace_config(struct qla_hw_data *ha) uint16_t msix; int cpus; - if (IS_QLA82XX(ha)) - return qla82xx_iospace_config(ha); - if (pci_request_selected_regions(ha->pdev, ha->bars, QLA2XXX_DRIVER_NAME)) { ql_log_pci(ql_log_fatal, ha->pdev, 0x0011, @@ -1593,6 +1590,96 @@ iospace_error_exit: } +static int +qla83xx_iospace_config(struct qla_hw_data *ha) +{ + uint16_t msix; + int cpus; + + if (pci_request_selected_regions(ha->pdev, ha->bars, + QLA2XXX_DRIVER_NAME)) { + ql_log_pci(ql_log_fatal, ha->pdev, 0x0117, + "Failed to reserve PIO/MMIO regions (%s), aborting.\n", + pci_name(ha->pdev)); + + goto iospace_error_exit; + } + + /* Use MMIO operations for all accesses. */ + if (!(pci_resource_flags(ha->pdev, 0) & IORESOURCE_MEM)) { + ql_log_pci(ql_log_warn, ha->pdev, 0x0118, + "Invalid pci I/O region size (%s).\n", + pci_name(ha->pdev)); + goto iospace_error_exit; + } + if (pci_resource_len(ha->pdev, 0) < MIN_IOBASE_LEN) { + ql_log_pci(ql_log_warn, ha->pdev, 0x0119, + "Invalid PCI mem region size (%s), aborting\n", + pci_name(ha->pdev)); + goto iospace_error_exit; + } + + ha->iobase = ioremap(pci_resource_start(ha->pdev, 0), MIN_IOBASE_LEN); + if (!ha->iobase) { + ql_log_pci(ql_log_fatal, ha->pdev, 0x011a, + "Cannot remap MMIO (%s), aborting.\n", + pci_name(ha->pdev)); + goto iospace_error_exit; + } + + /* 64bit PCI BAR - BAR2 will correspoond to region 4 */ + /* 83XX 26XX always use MQ type access for queues + * - mbar 2, a.k.a region 4 */ + ha->max_req_queues = ha->max_rsp_queues = 1; + ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 4), + pci_resource_len(ha->pdev, 4)); + + if (!ha->mqiobase) { + ql_log_pci(ql_log_fatal, ha->pdev, 0x011d, + "BAR2/region4 not enabled\n"); + goto mqiobase_exit; + } + + ha->msixbase = ioremap(pci_resource_start(ha->pdev, 2), + pci_resource_len(ha->pdev, 2)); + if (ha->msixbase) { + /* Read MSIX vector size of the board */ + pci_read_config_word(ha->pdev, + QLA_83XX_PCI_MSIX_CONTROL, &msix); + ha->msix_count = msix; + /* Max queues are bounded by available msix vectors */ + /* queue 0 uses two msix vectors */ + if (ql2xmultique_tag) { + cpus = num_online_cpus(); + ha->max_rsp_queues = (ha->msix_count - 1 > cpus) ? + (cpus + 1) : (ha->msix_count - 1); + ha->max_req_queues = 2; + } else if (ql2xmaxqueues > 1) { + ha->max_req_queues = ql2xmaxqueues > QLA_MQ_SIZE ? + QLA_MQ_SIZE : ql2xmaxqueues; + ql_dbg_pci(ql_dbg_multiq, ha->pdev, 0xc00c, + "QoS mode set, max no of request queues:%d.\n", + ha->max_req_queues); + ql_dbg_pci(ql_dbg_init, ha->pdev, 0x011b, + "QoS mode set, max no of request queues:%d.\n", + ha->max_req_queues); + } + ql_log_pci(ql_log_info, ha->pdev, 0x011c, + "MSI-X vector count: %d.\n", msix); + } else + ql_log_pci(ql_log_info, ha->pdev, 0x011e, + "BAR 1 not enabled.\n"); + +mqiobase_exit: + ha->msix_count = ha->max_rsp_queues + 1; + ql_dbg_pci(ql_dbg_init, ha->pdev, 0x011f, + "MSIX Count:%d.\n", ha->msix_count); + return 0; + +iospace_error_exit: + return -ENOMEM; +} + static struct isp_operations qla2100_isp_ops = { .pci_config = qla2100_pci_config, .reset_chip = qla2x00_reset_chip, @@ -1769,7 +1856,7 @@ static struct isp_operations qla81xx_isp_ops = { .fw_dump = qla81xx_fw_dump, .beacon_on = qla24xx_beacon_on, .beacon_off = qla24xx_beacon_off, - .beacon_blink = qla24xx_beacon_blink, + .beacon_blink = qla83xx_beacon_blink, .read_optrom = qla25xx_read_optrom_data, .write_optrom = qla24xx_write_optrom_data, .get_flash_version = qla24xx_get_flash_version, @@ -1815,6 +1902,43 @@ static struct isp_operations qla82xx_isp_ops = { .iospace_config = qla82xx_iospace_config, }; +static struct isp_operations qla83xx_isp_ops = { + .pci_config = qla25xx_pci_config, + .reset_chip = qla24xx_reset_chip, + .chip_diag = qla24xx_chip_diag, + .config_rings = qla24xx_config_rings, + .reset_adapter = qla24xx_reset_adapter, + .nvram_config = qla81xx_nvram_config, + .update_fw_options = qla81xx_update_fw_options, + .load_risc = qla81xx_load_risc, + .pci_info_str = qla24xx_pci_info_str, + .fw_version_str = qla24xx_fw_version_str, + .intr_handler = qla24xx_intr_handler, + .enable_intrs = qla24xx_enable_intrs, + .disable_intrs = qla24xx_disable_intrs, + .abort_command = qla24xx_abort_command, + .target_reset = qla24xx_abort_target, + .lun_reset = qla24xx_lun_reset, + .fabric_login = qla24xx_login_fabric, + .fabric_logout = qla24xx_fabric_logout, + .calc_req_entries = NULL, + .build_iocbs = NULL, + .prep_ms_iocb = qla24xx_prep_ms_iocb, + .prep_ms_fdmi_iocb = qla24xx_prep_ms_fdmi_iocb, + .read_nvram = NULL, + .write_nvram = NULL, + .fw_dump = qla83xx_fw_dump, + .beacon_on = qla24xx_beacon_on, + .beacon_off = qla24xx_beacon_off, + .beacon_blink = qla83xx_beacon_blink, + .read_optrom = qla25xx_read_optrom_data, + .write_optrom = qla24xx_write_optrom_data, + .get_flash_version = qla24xx_get_flash_version, + .start_scsi = qla24xx_dif_start_scsi, + .abort_isp = qla2x00_abort_isp, + .iospace_config = qla83xx_iospace_config, +}; + static inline void qla2x00_set_isp_flags(struct qla_hw_data *ha) { @@ -1909,6 +2033,22 @@ qla2x00_set_isp_flags(struct qla_hw_data *ha) /* Initialize 82XX ISP flags */ qla82xx_init_flags(ha); break; + case PCI_DEVICE_ID_QLOGIC_ISP2031: + ha->device_type |= DT_ISP2031; + ha->device_type |= DT_ZIO_SUPPORTED; + ha->device_type |= DT_FWI2; + ha->device_type |= DT_IIDMA; + ha->device_type |= DT_T10_PI; + ha->fw_srisc_address = RISC_START_ADDRESS_2400; + break; + case PCI_DEVICE_ID_QLOGIC_ISP8031: + ha->device_type |= DT_ISP8031; + ha->device_type |= DT_ZIO_SUPPORTED; + ha->device_type |= DT_FWI2; + ha->device_type |= DT_IIDMA; + ha->device_type |= DT_T10_PI; + ha->fw_srisc_address = RISC_START_ADDRESS_2400; + break; } if (IS_QLA82XX(ha)) @@ -1980,7 +2120,9 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432 || pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532 || pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8001 || - pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8021) { + pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8021 || + pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2031 || + pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8031) { bars = pci_select_bars(pdev, IORESOURCE_MEM); mem_only = 1; ql_dbg_pci(ql_dbg_init, pdev, 0x0007, @@ -2020,9 +2162,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) qla2x00_set_isp_flags(ha); /* Set EEH reset type to fundamental if required by hba */ - if ( IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha)) { + if (IS_QLA24XX(ha) || IS_QLA25XX(ha) || IS_QLA81XX(ha)) pdev->needs_freset = 1; - } ha->prev_topology = 0; ha->init_cb_size = sizeof(init_cb_t); @@ -2123,7 +2264,22 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->flash_data_off = FARX_ACCESS_FLASH_DATA; ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF; ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA; + } else if (IS_QLA83XX(ha)) { + ha->mbx_count = MAILBOX_REGISTER_COUNT; + req_length = REQUEST_ENTRY_CNT_24XX; + rsp_length = RESPONSE_ENTRY_CNT_2300; + ha->max_loop_id = SNS_LAST_LOOP_ID_2300; + ha->init_cb_size = sizeof(struct mid_init_cb_81xx); + ha->gid_list_info_size = 8; + ha->optrom_size = OPTROM_SIZE_83XX; + ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX; + ha->isp_ops = &qla83xx_isp_ops; + ha->flash_conf_off = FARX_ACCESS_FLASH_CONF_81XX; + ha->flash_data_off = FARX_ACCESS_FLASH_DATA_81XX; + ha->nvram_conf_off = ~0; + ha->nvram_data_off = ~0; } + ql_dbg_pci(ql_dbg_init, pdev, 0x001e, "mbx_count=%d, req_length=%d, " "rsp_length=%d, max_loop_id=%d, init_cb_size=%d, " @@ -2251,7 +2407,7 @@ que_init: req->req_q_out = &ha->iobase->isp24.req_q_out; rsp->rsp_q_in = &ha->iobase->isp24.rsp_q_in; rsp->rsp_q_out = &ha->iobase->isp24.rsp_q_out; - if (ha->mqenable) { + if (ha->mqenable || IS_QLA83XX(ha)) { req->req_q_in = &ha->mqiobase->isp25mq.req_q_in; req->req_q_out = &ha->mqiobase->isp25mq.req_q_out; rsp->rsp_q_in = &ha->mqiobase->isp25mq.rsp_q_in; @@ -2552,6 +2708,9 @@ qla2x00_remove_one(struct pci_dev *pdev) if (ha->mqiobase) iounmap(ha->mqiobase); + + if (IS_QLA83XX(ha) && ha->msixbase) + iounmap(ha->msixbase); } pci_release_selected_regions(ha->pdev, ha->bars); @@ -2893,7 +3052,7 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, ha->npiv_info = NULL; /* Get consistent memory allocated for EX-INIT-CB. */ - if (IS_QLA8XXX_TYPE(ha)) { + if (IS_CNA_CAPABLE(ha) || IS_QLA2031(ha)) { ha->ex_init_cb = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &ha->ex_init_cb_dma); if (!ha->ex_init_cb) @@ -3889,7 +4048,7 @@ qla2x00_timer(scsi_qla_host_t *vha) /* Firmware interface routines. */ -#define FW_BLOBS 8 +#define FW_BLOBS 10 #define FW_ISP21XX 0 #define FW_ISP22XX 1 #define FW_ISP2300 2 @@ -3898,6 +4057,8 @@ qla2x00_timer(scsi_qla_host_t *vha) #define FW_ISP25XX 5 #define FW_ISP81XX 6 #define FW_ISP82XX 7 +#define FW_ISP2031 8 +#define FW_ISP8031 9 #define FW_FILE_ISP21XX "ql2100_fw.bin" #define FW_FILE_ISP22XX "ql2200_fw.bin" @@ -3907,6 +4068,8 @@ qla2x00_timer(scsi_qla_host_t *vha) #define FW_FILE_ISP25XX "ql2500_fw.bin" #define FW_FILE_ISP81XX "ql8100_fw.bin" #define FW_FILE_ISP82XX "ql8200_fw.bin" +#define FW_FILE_ISP2031 "ql2600_fw.bin" +#define FW_FILE_ISP8031 "ql8300_fw.bin" static DEFINE_MUTEX(qla_fw_lock); @@ -3919,6 +4082,8 @@ static struct fw_blob qla_fw_blobs[FW_BLOBS] = { { .name = FW_FILE_ISP25XX, }, { .name = FW_FILE_ISP81XX, }, { .name = FW_FILE_ISP82XX, }, + { .name = FW_FILE_ISP2031, }, + { .name = FW_FILE_ISP8031, }, }; struct fw_blob * @@ -3944,6 +4109,10 @@ qla2x00_request_firmware(scsi_qla_host_t *vha) blob = &qla_fw_blobs[FW_ISP81XX]; } else if (IS_QLA82XX(ha)) { blob = &qla_fw_blobs[FW_ISP82XX]; + } else if (IS_QLA2031(ha)) { + blob = &qla_fw_blobs[FW_ISP2031]; + } else if (IS_QLA8031(ha)) { + blob = &qla_fw_blobs[FW_ISP8031]; } mutex_lock(&qla_fw_lock); @@ -4265,6 +4434,7 @@ static struct pci_device_id qla2xxx_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5422) }, { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) }, { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2532) }, + { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2031) }, { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8001) }, { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8021) }, { 0 }, diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 16bc72844a9..3c13c0a6be6 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -568,6 +568,9 @@ qla2xxx_find_flt_start(scsi_qla_host_t *vha, uint32_t *start) else if (IS_QLA82XX(ha)) { *start = FA_FLASH_LAYOUT_ADDR_82; goto end; + } else if (IS_QLA83XX(ha)) { + *start = FA_FLASH_LAYOUT_ADDR_83; + goto end; } /* Begin with first PCI expansion ROM header. */ buf = (uint8_t *)req->ring; @@ -721,13 +724,22 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr) le32_to_cpu(region->size)); switch (le32_to_cpu(region->code) & 0xff) { + case FLT_REG_FCOE_FW: + if (!IS_QLA8031(ha)) + break; + ha->flt_region_fw = start; + break; case FLT_REG_FW: + if (IS_QLA8031(ha)) + break; ha->flt_region_fw = start; break; case FLT_REG_BOOT_CODE: ha->flt_region_boot = start; break; case FLT_REG_VPD_0: + if (IS_QLA8031(ha)) + break; ha->flt_region_vpd_nvram = start; if (IS_QLA82XX(ha)) break; @@ -735,16 +747,20 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr) ha->flt_region_vpd = start; break; case FLT_REG_VPD_1: - if (IS_QLA82XX(ha)) + if (IS_QLA82XX(ha) || IS_QLA8031(ha)) break; if (!ha->flags.port0) ha->flt_region_vpd = start; break; case FLT_REG_NVRAM_0: + if (IS_QLA8031(ha)) + break; if (ha->flags.port0) ha->flt_region_nvram = start; break; case FLT_REG_NVRAM_1: + if (IS_QLA8031(ha)) + break; if (!ha->flags.port0) ha->flt_region_nvram = start; break; @@ -785,6 +801,31 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr) case FLT_REG_VPD_82XX: ha->flt_region_vpd = start; break; + case FLT_REG_FCOE_VPD_0: + if (!IS_QLA8031(ha)) + break; + ha->flt_region_vpd_nvram = start; + if (ha->flags.port0) + ha->flt_region_vpd = start; + break; + case FLT_REG_FCOE_VPD_1: + if (!IS_QLA8031(ha)) + break; + if (!ha->flags.port0) + ha->flt_region_vpd = start; + break; + case FLT_REG_FCOE_NVRAM_0: + if (!IS_QLA8031(ha)) + break; + if (ha->flags.port0) + ha->flt_region_nvram = start; + break; + case FLT_REG_FCOE_NVRAM_1: + if (!IS_QLA8031(ha)) + break; + if (!ha->flags.port0) + ha->flt_region_nvram = start; + break; } } goto done; @@ -804,15 +845,12 @@ no_flash_data: def_npiv_conf0[def] : def_npiv_conf1[def]; done: ql_dbg(ql_dbg_init, vha, 0x004a, - "FLT[%s]: boot=0x%x fw=0x%x vpd_nvram=0x%x vpd=0x%x.\n", - loc, ha->flt_region_boot, - ha->flt_region_fw, ha->flt_region_vpd_nvram, - ha->flt_region_vpd); - ql_dbg(ql_dbg_init, vha, 0x004b, - "nvram=0x%x fdt=0x%x flt=0x%x npiv=0x%x fcp_prif_cfg=0x%x.\n", - ha->flt_region_nvram, - ha->flt_region_fdt, ha->flt_region_flt, - ha->flt_region_npiv_conf, ha->flt_region_fcp_prio); + "FLT[%s]: boot=0x%x fw=0x%x vpd_nvram=0x%x vpd=0x%x nvram=0x%x " + "fdt=0x%x flt=0x%x npiv=0x%x fcp_prif_cfg=0x%x.\n", + loc, ha->flt_region_boot, ha->flt_region_fw, + ha->flt_region_vpd_nvram, ha->flt_region_vpd, ha->flt_region_nvram, + ha->flt_region_fdt, ha->flt_region_flt, ha->flt_region_npiv_conf, + ha->flt_region_fcp_prio); } static void @@ -948,7 +986,8 @@ qla2xxx_get_flash_info(scsi_qla_host_t *vha) uint32_t flt_addr; struct qla_hw_data *ha = vha->hw; - if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && !IS_QLA8XXX_TYPE(ha)) + if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && + !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha)) return QLA_SUCCESS; ret = qla2xxx_find_flt_start(vha, &flt_addr); @@ -974,7 +1013,8 @@ qla2xxx_flash_npiv_conf(scsi_qla_host_t *vha) struct qla_npiv_entry *entry; struct qla_hw_data *ha = vha->hw; - if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && !IS_QLA8XXX_TYPE(ha)) + if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && + !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha)) return; ha->isp_ops->read_optrom(vha, (uint8_t *)&hdr, @@ -1144,8 +1184,8 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, struct qla_hw_data *ha = vha->hw; /* Prepare burst-capable write on supported ISPs. */ - if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && !(faddr & 0xfff) && - dwords > OPTROM_BURST_DWORDS) { + if ((IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha)) && + !(faddr & 0xfff) && dwords > OPTROM_BURST_DWORDS) { optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, &optrom_dma, GFP_KERNEL); if (!optrom) { @@ -1619,6 +1659,71 @@ qla24xx_beacon_blink(struct scsi_qla_host *vha) spin_unlock_irqrestore(&ha->hardware_lock, flags); } +void +qla83xx_beacon_blink(struct scsi_qla_host *vha) +{ + uint32_t led_select_value; + struct qla_hw_data *ha = vha->hw; + uint16_t led_cfg[6]; + uint16_t orig_led_cfg[6]; + + if (!IS_QLA83XX(ha) && !IS_QLA81XX(ha)) + return; + + if (IS_QLA2031(ha) && ha->beacon_blink_led) { + if (ha->flags.port0) + led_select_value = 0x00201320; + else + led_select_value = 0x00201328; + + qla83xx_write_remote_reg(vha, led_select_value, 0x40002000); + qla83xx_write_remote_reg(vha, led_select_value + 4, 0x40002000); + msleep(1000); + qla83xx_write_remote_reg(vha, led_select_value, 0x40004000); + qla83xx_write_remote_reg(vha, led_select_value + 4, 0x40004000); + } else if ((IS_QLA8031(ha) || IS_QLA81XX(ha)) && ha->beacon_blink_led) { + int rval; + + /* Save Current */ + rval = qla81xx_get_led_config(vha, orig_led_cfg); + /* Do the blink */ + if (rval == QLA_SUCCESS) { + if (IS_QLA81XX(ha)) { + led_cfg[0] = 0x4000; + led_cfg[1] = 0x2000; + led_cfg[2] = 0; + led_cfg[3] = 0; + led_cfg[4] = 0; + led_cfg[5] = 0; + } else { + led_cfg[0] = 0x4000; + led_cfg[1] = 0x4000; + led_cfg[2] = 0x4000; + led_cfg[3] = 0x2000; + led_cfg[4] = 0; + led_cfg[5] = 0x2000; + } + rval = qla81xx_set_led_config(vha, led_cfg); + msleep(1000); + if (IS_QLA81XX(ha)) { + led_cfg[0] = 0x4000; + led_cfg[1] = 0x2000; + led_cfg[2] = 0; + } else { + led_cfg[0] = 0x4000; + led_cfg[1] = 0x2000; + led_cfg[2] = 0x4000; + led_cfg[3] = 0x4000; + led_cfg[4] = 0; + led_cfg[5] = 0x2000; + } + rval = qla81xx_set_led_config(vha, led_cfg); + } + /* On exit, restore original (presumes no status change) */ + qla81xx_set_led_config(vha, orig_led_cfg); + } +} + int qla24xx_beacon_on(struct scsi_qla_host *vha) { @@ -1630,6 +1735,9 @@ qla24xx_beacon_on(struct scsi_qla_host *vha) if (IS_QLA82XX(ha)) return QLA_SUCCESS; + if (IS_QLA8031(ha) || IS_QLA81XX(ha)) + goto skip_gpio; /* let blink handle it */ + if (ha->beacon_blink_led == 0) { /* Enable firmware for update */ ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL; @@ -1644,6 +1752,9 @@ qla24xx_beacon_on(struct scsi_qla_host *vha) return QLA_FUNCTION_FAILED; } + if (IS_QLA2031(ha)) + goto skip_gpio; + spin_lock_irqsave(&ha->hardware_lock, flags); gpio_data = RD_REG_DWORD(®->gpiod); @@ -1658,6 +1769,7 @@ qla24xx_beacon_on(struct scsi_qla_host *vha) /* So all colors blink together. */ ha->beacon_color_state = 0; +skip_gpio: /* Let the per HBA timer kick off the blinking process. */ ha->beacon_blink_led = 1; @@ -1676,6 +1788,13 @@ qla24xx_beacon_off(struct scsi_qla_host *vha) return QLA_SUCCESS; ha->beacon_blink_led = 0; + + if (IS_QLA2031(ha)) + goto set_fw_options; + + if (IS_QLA8031(ha) || IS_QLA81XX(ha)) + return QLA_SUCCESS; + ha->beacon_color_state = QLA_LED_ALL_ON; ha->isp_ops->beacon_blink(vha); /* Will flip to all off. */ @@ -1690,6 +1809,7 @@ qla24xx_beacon_off(struct scsi_qla_host *vha) RD_REG_DWORD(®->gpiod); spin_unlock_irqrestore(&ha->hardware_lock, flags); +set_fw_options: ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL; if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) { -- cgit v1.2.3-70-g09d2 From 69e5f1ea61a3e84c03103c6a18ee9cacef4cbb9e Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 9 Feb 2012 11:15:35 -0800 Subject: [SCSI] qla2xxx: Use a valid enode-mac if none defined. Original 'defaults' were not OUI valid. Signed-off-by: Andrew Vasquez Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 38d865911ee..e5b417aa9fc 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -5255,9 +5255,9 @@ qla81xx_nvram_config(scsi_qla_host_t *vha) memcpy(icb->enode_mac, nv->enode_mac, sizeof(icb->enode_mac)); /* Some boards (with valid NVRAMs) still have NULL enode_mac!! */ if (!memcmp(icb->enode_mac, "\0\0\0\0\0\0", sizeof(icb->enode_mac))) { - icb->enode_mac[0] = 0x01; - icb->enode_mac[1] = 0x02; - icb->enode_mac[2] = 0x03; + icb->enode_mac[0] = 0x00; + icb->enode_mac[1] = 0xC0; + icb->enode_mac[2] = 0xDD; icb->enode_mac[3] = 0x04; icb->enode_mac[4] = 0x05; icb->enode_mac[5] = 0x06 + ha->port_no; -- cgit v1.2.3-70-g09d2 From 9ba56b95a588906a65664a9299a9f8ac1a0f6a91 Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Thu, 9 Feb 2012 11:15:36 -0800 Subject: [SCSI] qla2xxx: Consolidation of SRB processing. Rework the structures related to SRB processing to minimize the memory allocations per I/O and manage resources associated with and completions from common routines. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_bsg.c | 86 +++++------ drivers/scsi/qla2xxx/qla_dbg.c | 5 +- drivers/scsi/qla2xxx/qla_def.h | 44 +++--- drivers/scsi/qla2xxx/qla_gbl.h | 9 +- drivers/scsi/qla2xxx/qla_init.c | 256 +++++++++++++------------------- drivers/scsi/qla2xxx/qla_inline.h | 45 +++++- drivers/scsi/qla2xxx/qla_iocb.c | 158 ++++++++++---------- drivers/scsi/qla2xxx/qla_isr.c | 299 +++++++++++++------------------------- drivers/scsi/qla2xxx/qla_mbx.c | 3 +- drivers/scsi/qla2xxx/qla_nx.c | 2 +- drivers/scsi/qla2xxx/qla_os.c | 206 +++++++++++--------------- 11 files changed, 485 insertions(+), 628 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index 6887538d173..b2b664483ab 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -11,29 +11,36 @@ #include /* BSG support for ELS/CT pass through */ -inline srb_t * -qla2x00_get_ctx_bsg_sp(scsi_qla_host_t *vha, fc_port_t *fcport, size_t size) +void +qla2x00_bsg_job_done(void *data, void *ptr, int res) { - srb_t *sp; + srb_t *sp = (srb_t *)ptr; + struct scsi_qla_host *vha = (scsi_qla_host_t *)data; + struct fc_bsg_job *bsg_job = sp->u.bsg_job; + + bsg_job->reply->result = res; + bsg_job->job_done(bsg_job); + sp->free(vha, sp); +} + +void +qla2x00_bsg_sp_free(void *data, void *ptr) +{ + srb_t *sp = (srb_t *)ptr; + struct scsi_qla_host *vha = (scsi_qla_host_t *)data; + struct fc_bsg_job *bsg_job = sp->u.bsg_job; struct qla_hw_data *ha = vha->hw; - struct srb_ctx *ctx; - sp = mempool_alloc(ha->srb_mempool, GFP_KERNEL); - if (!sp) - goto done; - ctx = kzalloc(size, GFP_KERNEL); - if (!ctx) { - mempool_free(sp, ha->srb_mempool); - sp = NULL; - goto done; - } + dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, + bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); - memset(sp, 0, sizeof(*sp)); - sp->fcport = fcport; - sp->ctx = ctx; - ctx->iocbs = 1; -done: - return sp; + dma_unmap_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list, + bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); + + if (sp->type == SRB_CT_CMD || + sp->type == SRB_ELS_CMD_HST) + kfree(sp->fcport); + mempool_free(sp, vha->hw->srb_mempool); } int @@ -217,6 +224,7 @@ exit_fcp_prio_cfg: bsg_job->job_done(bsg_job); return ret; } + static int qla2x00_process_els(struct fc_bsg_job *bsg_job) { @@ -230,7 +238,6 @@ qla2x00_process_els(struct fc_bsg_job *bsg_job) int req_sg_cnt, rsp_sg_cnt; int rval = (DRIVER_ERROR << 16); uint16_t nextlid = 0; - struct srb_ctx *els; if (bsg_job->request->msgcode == FC_BSG_RPT_ELS) { rport = bsg_job->rport; @@ -337,20 +344,21 @@ qla2x00_process_els(struct fc_bsg_job *bsg_job) } /* Alloc SRB structure */ - sp = qla2x00_get_ctx_bsg_sp(vha, fcport, sizeof(struct srb_ctx)); + sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); if (!sp) { rval = -ENOMEM; goto done_unmap_sg; } - els = sp->ctx; - els->type = + sp->type = (bsg_job->request->msgcode == FC_BSG_RPT_ELS ? SRB_ELS_CMD_RPT : SRB_ELS_CMD_HST); - els->name = + sp->name = (bsg_job->request->msgcode == FC_BSG_RPT_ELS ? "bsg_els_rpt" : "bsg_els_hst"); - els->u.bsg_job = bsg_job; + sp->u.bsg_job = bsg_job; + sp->free = qla2x00_bsg_sp_free; + sp->done = qla2x00_bsg_job_done; ql_dbg(ql_dbg_user, vha, 0x700a, "bsg rqst type: %s els type: %x - loop-id=%x " @@ -362,7 +370,6 @@ qla2x00_process_els(struct fc_bsg_job *bsg_job) if (rval != QLA_SUCCESS) { ql_log(ql_log_warn, vha, 0x700e, "qla2x00_start_sp failed = %d\n", rval); - kfree(sp->ctx); mempool_free(sp, ha->srb_mempool); rval = -EIO; goto done_unmap_sg; @@ -409,7 +416,6 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job) uint16_t loop_id; struct fc_port *fcport; char *type = "FC_BSG_HST_CT"; - struct srb_ctx *ct; req_sg_cnt = dma_map_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, @@ -486,19 +492,20 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job) fcport->loop_id = loop_id; /* Alloc SRB structure */ - sp = qla2x00_get_ctx_bsg_sp(vha, fcport, sizeof(struct srb_ctx)); + sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); if (!sp) { ql_log(ql_log_warn, vha, 0x7015, - "qla2x00_get_ctx_bsg_sp failed.\n"); + "qla2x00_get_sp failed.\n"); rval = -ENOMEM; goto done_free_fcport; } - ct = sp->ctx; - ct->type = SRB_CT_CMD; - ct->name = "bsg_ct"; - ct->iocbs = qla24xx_calc_ct_iocbs(req_sg_cnt + rsp_sg_cnt); - ct->u.bsg_job = bsg_job; + sp->type = SRB_CT_CMD; + sp->name = "bsg_ct"; + sp->iocbs = qla24xx_calc_ct_iocbs(req_sg_cnt + rsp_sg_cnt); + sp->u.bsg_job = bsg_job; + sp->free = qla2x00_bsg_sp_free; + sp->done = qla2x00_bsg_job_done; ql_dbg(ql_dbg_user, vha, 0x7016, "bsg rqst type: %s else type: %x - " @@ -511,7 +518,6 @@ qla2x00_process_ct(struct fc_bsg_job *bsg_job) if (rval != QLA_SUCCESS) { ql_log(ql_log_warn, vha, 0x7017, "qla2x00_start_sp failed=%d.\n", rval); - kfree(sp->ctx); mempool_free(sp, ha->srb_mempool); rval = -EIO; goto done_free_fcport; @@ -1669,7 +1675,6 @@ qla24xx_bsg_timeout(struct fc_bsg_job *bsg_job) int cnt, que; unsigned long flags; struct req_que *req; - struct srb_ctx *sp_bsg; /* find the bsg job from the active list of commands */ spin_lock_irqsave(&ha->hardware_lock, flags); @@ -1681,11 +1686,9 @@ qla24xx_bsg_timeout(struct fc_bsg_job *bsg_job) for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { sp = req->outstanding_cmds[cnt]; if (sp) { - sp_bsg = sp->ctx; - - if (((sp_bsg->type == SRB_CT_CMD) || - (sp_bsg->type == SRB_ELS_CMD_HST)) - && (sp_bsg->u.bsg_job == bsg_job)) { + if (((sp->type == SRB_CT_CMD) || + (sp->type == SRB_ELS_CMD_HST)) + && (sp->u.bsg_job == bsg_job)) { spin_unlock_irqrestore(&ha->hardware_lock, flags); if (ha->isp_ops->abort_command(sp)) { ql_log(ql_log_warn, vha, 0x7089, @@ -1715,7 +1718,6 @@ done: spin_unlock_irqrestore(&ha->hardware_lock, flags); if (bsg_job->request->msgcode == FC_BSG_HST_CT) kfree(sp->fcport); - kfree(sp->ctx); mempool_free(sp, ha->srb_mempool); return 0; } diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index e4c6b940993..cd278a09bea 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -14,10 +14,11 @@ * | Module Init and Probe | 0x011f | 0x4b,0xfa | * | Mailbox commands | 0x1139 | 0x112c-0x112e | * | Device Discovery | 0x2084 | | - * | Queue Command and IO tracing | 0x302f | 0x3008 | + * | Queue Command and IO tracing | 0x302f | 0x3006,0x3008 | * | | | 0x302d-0x302e | * | DPC Thread | 0x401c | | - * | Async Events | 0x5057 | 0x5052 | + * | Async Events | 0x5057 | 0x502b-0x502f | + * | | | 0x5047,0x5052 | * | Timer Routines | 0x6011 | 0x600e-0x600f | * | User Space Interactions | 0x709e | 0x7018,0x702e | * | | | 0x7039,0x7045 | diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 7b7d829bef8..6704ef84c45 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -202,20 +202,12 @@ struct sd_dif_tuple { /* * SCSI Request Block */ -typedef struct srb { - atomic_t ref_count; - struct fc_port *fcport; - uint32_t handle; - +struct srb_cmd { struct scsi_cmnd *cmd; /* Linux SCSI command pkt */ - - uint16_t flags; - uint32_t request_sense_length; uint8_t *request_sense_ptr; - void *ctx; -} srb_t; +}; /* * SRB flag definitions @@ -254,10 +246,7 @@ struct srb_iocb { } u; struct timer_list timer; - - void (*done)(srb_t *); - void (*free)(srb_t *); - void (*timeout)(srb_t *); + void (*timeout)(void *); }; /* Values for srb_ctx type */ @@ -268,16 +257,37 @@ struct srb_iocb { #define SRB_CT_CMD 5 #define SRB_ADISC_CMD 6 #define SRB_TM_CMD 7 +#define SRB_SCSI_CMD 8 -struct srb_ctx { +typedef struct srb { + atomic_t ref_count; + struct fc_port *fcport; + uint32_t handle; + uint16_t flags; uint16_t type; char *name; int iocbs; union { - struct srb_iocb *iocb_cmd; + struct srb_iocb iocb_cmd; struct fc_bsg_job *bsg_job; + struct srb_cmd scmd; } u; -}; + void (*done)(void *, void *, int); + void (*free)(void *, void *); +} srb_t; + +#define GET_CMD_SP(sp) (sp->u.scmd.cmd) +#define SET_CMD_SP(sp, cmd) (sp->u.scmd.cmd = cmd) +#define GET_CMD_CTX_SP(sp) (sp->u.scmd.ctx) + +#define GET_CMD_SENSE_LEN(sp) \ + (sp->u.scmd.request_sense_length) +#define SET_CMD_SENSE_LEN(sp, len) \ + (sp->u.scmd.request_sense_length = len) +#define GET_CMD_SENSE_PTR(sp) \ + (sp->u.scmd.request_sense_ptr) +#define SET_CMD_SENSE_PTR(sp, ptr) \ + (sp->u.scmd.request_sense_ptr = ptr) struct msg_echo_lb { dma_addr_t send_dma; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 362d49cbcb7..87fee23fd16 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -71,8 +71,6 @@ extern void qla2x00_async_logout_done(struct scsi_qla_host *, fc_port_t *, uint16_t *); extern void qla2x00_async_adisc_done(struct scsi_qla_host *, fc_port_t *, uint16_t *); -extern void qla2x00_async_tm_cmd_done(struct scsi_qla_host *, fc_port_t *, - struct srb_iocb *); extern void *qla2x00_alloc_iocbs(struct scsi_qla_host *, srb_t *); extern int qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *, fc_port_t *); @@ -156,8 +154,7 @@ extern void qla2x00_do_dpc_all_vps(scsi_qla_host_t *); extern int qla24xx_vport_create_req_sanity_check(struct fc_vport *); extern scsi_qla_host_t * qla24xx_create_vhost(struct fc_vport *); -extern void qla2x00_sp_compl(struct qla_hw_data *, srb_t *); - +extern void qla2x00_sp_free_dma(void *, void *); extern char *qla2x00_get_fw_version_str(struct scsi_qla_host *, char *); extern void qla2x00_mark_device_lost(scsi_qla_host_t *, fc_port_t *, int, int); @@ -542,6 +539,10 @@ extern int qla82xx_restart_isp(scsi_qla_host_t *); /* IOCB related functions */ extern int qla82xx_start_scsi(srb_t *); +extern void qla2x00_sp_free(void *, void *); +extern void qla2x00_sp_timeout(unsigned long); +extern void qla2x00_bsg_job_done(void *, void *, int); +extern void qla2x00_bsg_sp_free(void *, void *); /* Interrupt related */ extern irqreturn_t qla82xx_intr_handler(int, void *); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index e5b417aa9fc..4837b5872cd 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -41,11 +41,10 @@ static int qla25xx_init_queues(struct qla_hw_data *); /* SRB Extensions ---------------------------------------------------------- */ -static void -qla2x00_ctx_sp_timeout(unsigned long __data) +void +qla2x00_sp_timeout(unsigned long __data) { srb_t *sp = (srb_t *)__data; - struct srb_ctx *ctx; struct srb_iocb *iocb; fc_port_t *fcport = sp->fcport; struct qla_hw_data *ha = fcport->vha->hw; @@ -55,79 +54,25 @@ qla2x00_ctx_sp_timeout(unsigned long __data) spin_lock_irqsave(&ha->hardware_lock, flags); req = ha->req_q_map[0]; req->outstanding_cmds[sp->handle] = NULL; - ctx = sp->ctx; - iocb = ctx->u.iocb_cmd; + iocb = &sp->u.iocb_cmd; iocb->timeout(sp); - iocb->free(sp); + sp->free(fcport->vha, sp); spin_unlock_irqrestore(&ha->hardware_lock, flags); } -static void -qla2x00_ctx_sp_free(srb_t *sp) +void +qla2x00_sp_free(void *data, void *ptr) { - struct srb_ctx *ctx = sp->ctx; - struct srb_iocb *iocb = ctx->u.iocb_cmd; - struct scsi_qla_host *vha = sp->fcport->vha; + srb_t *sp = (srb_t *)ptr; + struct srb_iocb *iocb = &sp->u.iocb_cmd; + struct scsi_qla_host *vha = (scsi_qla_host_t *)data; del_timer(&iocb->timer); - kfree(iocb); - kfree(ctx); - mempool_free(sp, sp->fcport->vha->hw->srb_mempool); + mempool_free(sp, vha->hw->srb_mempool); QLA_VHA_MARK_NOT_BUSY(vha); } -inline srb_t * -qla2x00_get_ctx_sp(scsi_qla_host_t *vha, fc_port_t *fcport, size_t size, - unsigned long tmo) -{ - srb_t *sp = NULL; - struct qla_hw_data *ha = vha->hw; - struct srb_ctx *ctx; - struct srb_iocb *iocb; - uint8_t bail; - - QLA_VHA_MARK_BUSY(vha, bail); - if (bail) - return NULL; - - sp = mempool_alloc(ha->srb_mempool, GFP_KERNEL); - if (!sp) - goto done; - ctx = kzalloc(size, GFP_KERNEL); - if (!ctx) { - mempool_free(sp, ha->srb_mempool); - sp = NULL; - goto done; - } - iocb = kzalloc(sizeof(struct srb_iocb), GFP_KERNEL); - if (!iocb) { - mempool_free(sp, ha->srb_mempool); - sp = NULL; - kfree(ctx); - goto done; - } - - memset(sp, 0, sizeof(*sp)); - sp->fcport = fcport; - sp->ctx = ctx; - ctx->iocbs = 1; - ctx->u.iocb_cmd = iocb; - iocb->free = qla2x00_ctx_sp_free; - - init_timer(&iocb->timer); - if (!tmo) - goto done; - iocb->timer.expires = jiffies + tmo * HZ; - iocb->timer.data = (unsigned long)sp; - iocb->timer.function = qla2x00_ctx_sp_timeout; - add_timer(&iocb->timer); -done: - if (!sp) - QLA_VHA_MARK_NOT_BUSY(vha); - return sp; -} - /* Asynchronous Login/Logout Routines -------------------------------------- */ static inline unsigned long @@ -149,19 +94,19 @@ qla2x00_get_async_timeout(struct scsi_qla_host *vha) } static void -qla2x00_async_iocb_timeout(srb_t *sp) +qla2x00_async_iocb_timeout(void *data) { + srb_t *sp = (srb_t *)data; fc_port_t *fcport = sp->fcport; - struct srb_ctx *ctx = sp->ctx; ql_dbg(ql_dbg_disc, fcport->vha, 0x2071, "Async-%s timeout - hdl=%x portid=%02x%02x%02x.\n", - ctx->name, sp->handle, fcport->d_id.b.domain, fcport->d_id.b.area, + sp->name, sp->handle, fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa); fcport->flags &= ~FCF_ASYNC_SENT; - if (ctx->type == SRB_LOGIN_CMD) { - struct srb_iocb *lio = ctx->u.iocb_cmd; + if (sp->type == SRB_LOGIN_CMD) { + struct srb_iocb *lio = &sp->u.iocb_cmd; qla2x00_post_async_logout_work(fcport->vha, fcport, NULL); /* Retry as needed. */ lio->u.logio.data[0] = MBS_COMMAND_ERROR; @@ -173,14 +118,16 @@ qla2x00_async_iocb_timeout(srb_t *sp) } static void -qla2x00_async_login_ctx_done(srb_t *sp) +qla2x00_async_login_sp_done(void *data, void *ptr, int res) { - struct srb_ctx *ctx = sp->ctx; - struct srb_iocb *lio = ctx->u.iocb_cmd; - - qla2x00_post_async_login_done_work(sp->fcport->vha, sp->fcport, - lio->u.logio.data); - lio->free(sp); + srb_t *sp = (srb_t *)ptr; + struct srb_iocb *lio = &sp->u.iocb_cmd; + struct scsi_qla_host *vha = (scsi_qla_host_t *)data; + + if (!test_bit(UNLOADING, &vha->dpc_flags)) + qla2x00_post_async_login_done_work(sp->fcport->vha, sp->fcport, + lio->u.logio.data); + sp->free(sp->fcport->vha, sp); } int @@ -188,22 +135,21 @@ qla2x00_async_login(struct scsi_qla_host *vha, fc_port_t *fcport, uint16_t *data) { srb_t *sp; - struct srb_ctx *ctx; struct srb_iocb *lio; int rval; rval = QLA_FUNCTION_FAILED; - sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_ctx), - qla2x00_get_async_timeout(vha) + 2); + sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); if (!sp) goto done; - ctx = sp->ctx; - ctx->type = SRB_LOGIN_CMD; - ctx->name = "login"; - lio = ctx->u.iocb_cmd; + sp->type = SRB_LOGIN_CMD; + sp->name = "login"; + qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2); + + lio = &sp->u.iocb_cmd; lio->timeout = qla2x00_async_iocb_timeout; - lio->done = qla2x00_async_login_ctx_done; + sp->done = qla2x00_async_login_sp_done; lio->u.logio.flags |= SRB_LOGIN_COND_PLOGI; if (data[1] & QLA_LOGIO_LOGIN_RETRIED) lio->u.logio.flags |= SRB_LOGIN_RETRIED; @@ -219,42 +165,43 @@ qla2x00_async_login(struct scsi_qla_host *vha, fc_port_t *fcport, return rval; done_free_sp: - lio->free(sp); + sp->free(fcport->vha, sp); done: return rval; } static void -qla2x00_async_logout_ctx_done(srb_t *sp) +qla2x00_async_logout_sp_done(void *data, void *ptr, int res) { - struct srb_ctx *ctx = sp->ctx; - struct srb_iocb *lio = ctx->u.iocb_cmd; - - qla2x00_post_async_logout_done_work(sp->fcport->vha, sp->fcport, - lio->u.logio.data); - lio->free(sp); + srb_t *sp = (srb_t *)ptr; + struct srb_iocb *lio = &sp->u.iocb_cmd; + struct scsi_qla_host *vha = (scsi_qla_host_t *)data; + + if (!test_bit(UNLOADING, &vha->dpc_flags)) + qla2x00_post_async_logout_done_work(sp->fcport->vha, sp->fcport, + lio->u.logio.data); + sp->free(sp->fcport->vha, sp); } int qla2x00_async_logout(struct scsi_qla_host *vha, fc_port_t *fcport) { srb_t *sp; - struct srb_ctx *ctx; struct srb_iocb *lio; int rval; rval = QLA_FUNCTION_FAILED; - sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_ctx), - qla2x00_get_async_timeout(vha) + 2); + sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); if (!sp) goto done; - ctx = sp->ctx; - ctx->type = SRB_LOGOUT_CMD; - ctx->name = "logout"; - lio = ctx->u.iocb_cmd; + sp->type = SRB_LOGOUT_CMD; + sp->name = "logout"; + qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2); + + lio = &sp->u.iocb_cmd; lio->timeout = qla2x00_async_iocb_timeout; - lio->done = qla2x00_async_logout_ctx_done; + sp->done = qla2x00_async_logout_sp_done; rval = qla2x00_start_sp(sp); if (rval != QLA_SUCCESS) goto done_free_sp; @@ -266,20 +213,22 @@ qla2x00_async_logout(struct scsi_qla_host *vha, fc_port_t *fcport) return rval; done_free_sp: - lio->free(sp); + sp->free(fcport->vha, sp); done: return rval; } static void -qla2x00_async_adisc_ctx_done(srb_t *sp) +qla2x00_async_adisc_sp_done(void *data, void *ptr, int res) { - struct srb_ctx *ctx = sp->ctx; - struct srb_iocb *lio = ctx->u.iocb_cmd; - - qla2x00_post_async_adisc_done_work(sp->fcport->vha, sp->fcport, - lio->u.logio.data); - lio->free(sp); + srb_t *sp = (srb_t *)ptr; + struct srb_iocb *lio = &sp->u.iocb_cmd; + struct scsi_qla_host *vha = (scsi_qla_host_t *)data; + + if (!test_bit(UNLOADING, &vha->dpc_flags)) + qla2x00_post_async_adisc_done_work(sp->fcport->vha, sp->fcport, + lio->u.logio.data); + sp->free(sp->fcport->vha, sp); } int @@ -287,22 +236,21 @@ qla2x00_async_adisc(struct scsi_qla_host *vha, fc_port_t *fcport, uint16_t *data) { srb_t *sp; - struct srb_ctx *ctx; struct srb_iocb *lio; int rval; rval = QLA_FUNCTION_FAILED; - sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_ctx), - qla2x00_get_async_timeout(vha) + 2); + sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); if (!sp) goto done; - ctx = sp->ctx; - ctx->type = SRB_ADISC_CMD; - ctx->name = "adisc"; - lio = ctx->u.iocb_cmd; + sp->type = SRB_ADISC_CMD; + sp->name = "adisc"; + qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2); + + lio = &sp->u.iocb_cmd; lio->timeout = qla2x00_async_iocb_timeout; - lio->done = qla2x00_async_adisc_ctx_done; + sp->done = qla2x00_async_adisc_sp_done; if (data[1] & QLA_LOGIO_LOGIN_RETRIED) lio->u.logio.flags |= SRB_LOGIN_RETRIED; rval = qla2x00_start_sp(sp); @@ -316,46 +264,62 @@ qla2x00_async_adisc(struct scsi_qla_host *vha, fc_port_t *fcport, return rval; done_free_sp: - lio->free(sp); + sp->free(fcport->vha, sp); done: return rval; } static void -qla2x00_async_tm_cmd_ctx_done(srb_t *sp) +qla2x00_async_tm_cmd_done(void *data, void *ptr, int res) { - struct srb_ctx *ctx = sp->ctx; - struct srb_iocb *iocb = (struct srb_iocb *)ctx->u.iocb_cmd; + srb_t *sp = (srb_t *)ptr; + struct srb_iocb *iocb = &sp->u.iocb_cmd; + struct scsi_qla_host *vha = (scsi_qla_host_t *)data; + uint32_t flags; + uint16_t lun; + int rval; - qla2x00_async_tm_cmd_done(sp->fcport->vha, sp->fcport, iocb); - iocb->free(sp); + if (!test_bit(UNLOADING, &vha->dpc_flags)) { + flags = iocb->u.tmf.flags; + lun = (uint16_t)iocb->u.tmf.lun; + + /* Issue Marker IOCB */ + rval = qla2x00_marker(vha, vha->hw->req_q_map[0], + vha->hw->rsp_q_map[0], sp->fcport->loop_id, lun, + flags == TCF_LUN_RESET ? MK_SYNC_ID_LUN : MK_SYNC_ID); + + if ((rval != QLA_SUCCESS) || iocb->u.tmf.data) { + ql_dbg(ql_dbg_taskm, vha, 0x8030, + "TM IOCB failed (%x).\n", rval); + } + } + sp->free(sp->fcport->vha, sp); } int -qla2x00_async_tm_cmd(fc_port_t *fcport, uint32_t flags, uint32_t lun, +qla2x00_async_tm_cmd(fc_port_t *fcport, uint32_t tm_flags, uint32_t lun, uint32_t tag) { struct scsi_qla_host *vha = fcport->vha; srb_t *sp; - struct srb_ctx *ctx; struct srb_iocb *tcf; int rval; rval = QLA_FUNCTION_FAILED; - sp = qla2x00_get_ctx_sp(vha, fcport, sizeof(struct srb_ctx), - qla2x00_get_async_timeout(vha) + 2); + sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL); if (!sp) goto done; - ctx = sp->ctx; - ctx->type = SRB_TM_CMD; - ctx->name = "tmf"; - tcf = ctx->u.iocb_cmd; - tcf->u.tmf.flags = flags; + sp->type = SRB_TM_CMD; + sp->name = "tmf"; + qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha) + 2); + + tcf = &sp->u.iocb_cmd; + tcf->u.tmf.flags = tm_flags; tcf->u.tmf.lun = lun; tcf->u.tmf.data = tag; tcf->timeout = qla2x00_async_iocb_timeout; - tcf->done = qla2x00_async_tm_cmd_ctx_done; + sp->done = qla2x00_async_tm_cmd_done; rval = qla2x00_start_sp(sp); if (rval != QLA_SUCCESS) @@ -368,7 +332,7 @@ qla2x00_async_tm_cmd(fc_port_t *fcport, uint32_t flags, uint32_t lun, return rval; done_free_sp: - tcf->free(sp); + sp->free(fcport->vha, sp); done: return rval; } @@ -452,30 +416,6 @@ qla2x00_async_adisc_done(struct scsi_qla_host *vha, fc_port_t *fcport, return; } -void -qla2x00_async_tm_cmd_done(struct scsi_qla_host *vha, fc_port_t *fcport, - struct srb_iocb *iocb) -{ - int rval; - uint32_t flags; - uint16_t lun; - - flags = iocb->u.tmf.flags; - lun = (uint16_t)iocb->u.tmf.lun; - - /* Issue Marker IOCB */ - rval = qla2x00_marker(vha, vha->hw->req_q_map[0], - vha->hw->rsp_q_map[0], fcport->loop_id, lun, - flags == TCF_LUN_RESET ? MK_SYNC_ID_LUN : MK_SYNC_ID); - - if ((rval != QLA_SUCCESS) || iocb->u.tmf.data) { - ql_dbg(ql_dbg_taskm, vha, 0x8030, - "TM IOCB failed (%x).\n", rval); - } - - return; -} - /****************************************************************************/ /* QLogic ISP2x00 Hardware Support Functions. */ /****************************************************************************/ diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index 7cc4f36cd53..3ea0cedc6e7 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -72,16 +72,19 @@ static inline void qla2x00_clean_dsd_pool(struct qla_hw_data *ha, srb_t *sp) { struct dsd_dma *dsd_ptr, *tdsd_ptr; + struct crc_context *ctx; + + ctx = (struct crc_context *)GET_CMD_CTX_SP(sp); /* clean up allocated prev pool */ list_for_each_entry_safe(dsd_ptr, tdsd_ptr, - &((struct crc_context *)sp->ctx)->dsd_list, list) { + &ctx->dsd_list, list) { dma_pool_free(ha->dl_dma_pool, dsd_ptr->dsd_addr, dsd_ptr->dsd_list_dma); list_del(&dsd_ptr->list); kfree(dsd_ptr); } - INIT_LIST_HEAD(&((struct crc_context *)sp->ctx)->dsd_list); + INIT_LIST_HEAD(&ctx->dsd_list); } static inline void @@ -113,8 +116,7 @@ qla2x00_hba_err_chk_enabled(srb_t *sp) return 0; * */ - - switch (scsi_get_prot_op(sp->cmd)) { + switch (scsi_get_prot_op(GET_CMD_SP(sp))) { case SCSI_PROT_READ_STRIP: case SCSI_PROT_WRITE_INSERT: if (ql2xenablehba_err_chk >= 1) @@ -144,3 +146,38 @@ qla2x00_reset_active(scsi_qla_host_t *vha) test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags); } + +static inline srb_t * +qla2x00_get_sp(scsi_qla_host_t *vha, fc_port_t *fcport, gfp_t flag) +{ + srb_t *sp = NULL; + struct qla_hw_data *ha = vha->hw; + uint8_t bail; + + QLA_VHA_MARK_BUSY(vha, bail); + if (unlikely(bail)) + return NULL; + + sp = mempool_alloc(ha->srb_mempool, flag); + if (!sp) + goto done; + + memset(sp, 0, sizeof(*sp)); + sp->fcport = fcport; + sp->iocbs = 1; +done: + if (!sp) + QLA_VHA_MARK_NOT_BUSY(vha); + return sp; +} + +static inline void +qla2x00_init_timer(srb_t *sp, unsigned long tmo) +{ + init_timer(&sp->u.iocb_cmd.timer); + sp->u.iocb_cmd.timer.expires = jiffies + tmo * HZ; + sp->u.iocb_cmd.timer.data = (unsigned long)sp; + sp->u.iocb_cmd.timer.function = qla2x00_sp_timeout; + add_timer(&sp->u.iocb_cmd.timer); + sp->free = qla2x00_sp_free; +} diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index a281b5422df..8ce810373b5 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -22,18 +22,19 @@ static inline uint16_t qla2x00_get_cmd_direction(srb_t *sp) { uint16_t cflags; + struct scsi_cmnd *cmd = GET_CMD_SP(sp); cflags = 0; /* Set transfer direction */ - if (sp->cmd->sc_data_direction == DMA_TO_DEVICE) { + if (cmd->sc_data_direction == DMA_TO_DEVICE) { cflags = CF_WRITE; sp->fcport->vha->hw->qla_stats.output_bytes += - scsi_bufflen(sp->cmd); - } else if (sp->cmd->sc_data_direction == DMA_FROM_DEVICE) { + scsi_bufflen(cmd); + } else if (cmd->sc_data_direction == DMA_FROM_DEVICE) { cflags = CF_READ; sp->fcport->vha->hw->qla_stats.input_bytes += - scsi_bufflen(sp->cmd); + scsi_bufflen(cmd); } return (cflags); } @@ -143,12 +144,13 @@ qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha, struct req_que *req) static inline int qla24xx_configure_prot_mode(srb_t *sp, uint16_t *fw_prot_opts) { - uint8_t guard = scsi_host_get_guard(sp->cmd->device->host); + struct scsi_cmnd *cmd = GET_CMD_SP(sp); + uint8_t guard = scsi_host_get_guard(cmd->device->host); /* We only support T10 DIF right now */ if (guard != SHOST_DIX_GUARD_CRC) { ql_dbg(ql_dbg_io, sp->fcport->vha, 0x3007, - "Unsupported guard: %d for cmd=%p.\n", guard, sp->cmd); + "Unsupported guard: %d for cmd=%p.\n", guard, cmd); return 0; } @@ -156,7 +158,7 @@ qla24xx_configure_prot_mode(srb_t *sp, uint16_t *fw_prot_opts) *fw_prot_opts = 0; /* Translate SCSI opcode to a protection opcode */ - switch (scsi_get_prot_op(sp->cmd)) { + switch (scsi_get_prot_op(cmd)) { case SCSI_PROT_READ_STRIP: *fw_prot_opts |= PO_MODE_DIF_REMOVE; break; @@ -180,7 +182,7 @@ qla24xx_configure_prot_mode(srb_t *sp, uint16_t *fw_prot_opts) break; } - return scsi_prot_sg_count(sp->cmd); + return scsi_prot_sg_count(cmd); } /* @@ -201,7 +203,7 @@ void qla2x00_build_scsi_iocbs_32(srb_t *sp, cmd_entry_t *cmd_pkt, struct scatterlist *sg; int i; - cmd = sp->cmd; + cmd = GET_CMD_SP(sp); /* Update entry type to indicate Command Type 2 IOCB */ *((uint32_t *)(&cmd_pkt->entry_type)) = @@ -259,7 +261,7 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt, struct scatterlist *sg; int i; - cmd = sp->cmd; + cmd = GET_CMD_SP(sp); /* Update entry type to indicate Command Type 3 IOCB */ *((uint32_t *)(&cmd_pkt->entry_type)) = @@ -333,7 +335,7 @@ qla2x00_start_scsi(srb_t *sp) vha = sp->fcport->vha; ha = vha->hw; reg = &ha->iobase->isp; - cmd = sp->cmd; + cmd = GET_CMD_SP(sp); req = ha->req_q_map[0]; rsp = ha->rsp_q_map[0]; /* So we know we haven't pci_map'ed anything yet */ @@ -391,7 +393,7 @@ qla2x00_start_scsi(srb_t *sp) req->current_outstanding_cmd = handle; req->outstanding_cmds[handle] = sp; sp->handle = handle; - sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle; + cmd->host_scribble = (unsigned char *)(unsigned long)handle; req->cnt -= req_cnt; cmd_pkt = (cmd_entry_t *)req->ring_ptr; @@ -403,7 +405,7 @@ qla2x00_start_scsi(srb_t *sp) /* Set target ID and LUN number*/ SET_TARGET_ID(ha, cmd_pkt->target, sp->fcport->loop_id); - cmd_pkt->lun = cpu_to_le16(sp->cmd->device->lun); + cmd_pkt->lun = cpu_to_le16(cmd->device->lun); /* Update tagged queuing modifier */ if (scsi_populate_tag_msg(cmd, tag)) { @@ -608,7 +610,7 @@ qla24xx_build_scsi_type_6_iocbs(srb_t *sp, struct cmd_type_6 *cmd_pkt, struct dsd_dma *dsd_ptr; struct ct6_dsd *ctx; - cmd = sp->cmd; + cmd = GET_CMD_SP(sp); /* Update entry type to indicate Command Type 3 IOCB */ *((uint32_t *)(&cmd_pkt->entry_type)) = @@ -635,7 +637,7 @@ qla24xx_build_scsi_type_6_iocbs(srb_t *sp, struct cmd_type_6 *cmd_pkt, } cur_seg = scsi_sglist(cmd); - ctx = sp->ctx; + ctx = GET_CMD_CTX_SP(sp); while (tot_dsds) { avail_dsds = (tot_dsds > QLA_DSDS_PER_IOCB) ? @@ -724,7 +726,7 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt, int i; struct req_que *req; - cmd = sp->cmd; + cmd = GET_CMD_SP(sp); /* Update entry type to indicate Command Type 3 IOCB */ *((uint32_t *)(&cmd_pkt->entry_type)) = @@ -744,12 +746,12 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt, cmd_pkt->task_mgmt_flags = __constant_cpu_to_le16(TMF_WRITE_DATA); sp->fcport->vha->hw->qla_stats.output_bytes += - scsi_bufflen(sp->cmd); + scsi_bufflen(cmd); } else if (cmd->sc_data_direction == DMA_FROM_DEVICE) { cmd_pkt->task_mgmt_flags = __constant_cpu_to_le16(TMF_READ_DATA); sp->fcport->vha->hw->qla_stats.input_bytes += - scsi_bufflen(sp->cmd); + scsi_bufflen(cmd); } /* One DSD is available in the Command Type 3 IOCB */ @@ -796,7 +798,7 @@ static inline void qla24xx_set_t10dif_tags(srb_t *sp, struct fw_dif_context *pkt, unsigned int protcnt) { - struct scsi_cmnd *cmd = sp->cmd; + struct scsi_cmnd *cmd = GET_CMD_SP(sp); scsi_qla_host_t *vha = shost_priv(cmd->device->host); switch (scsi_get_prot_type(cmd)) { @@ -951,16 +953,16 @@ qla24xx_walk_and_build_sglist_no_difb(struct qla_hw_data *ha, srb_t *sp, struct qla2_sgx sgx; dma_addr_t sle_dma; uint32_t sle_dma_len, tot_prot_dma_len = 0; - struct scsi_cmnd *cmd = sp->cmd; + struct scsi_cmnd *cmd = GET_CMD_SP(sp); prot_int = cmd->device->sector_size; memset(&sgx, 0, sizeof(struct qla2_sgx)); - sgx.tot_bytes = scsi_bufflen(sp->cmd); - sgx.cur_sg = scsi_sglist(sp->cmd); + sgx.tot_bytes = scsi_bufflen(cmd); + sgx.cur_sg = scsi_sglist(cmd); sgx.sp = sp; - sg_prot = scsi_prot_sglist(sp->cmd); + sg_prot = scsi_prot_sglist(cmd); while (qla24xx_get_one_block_sg(prot_int, &sgx, &partial)) { @@ -994,7 +996,7 @@ alloc_and_fill: } list_add_tail(&dsd_ptr->list, - &((struct crc_context *)sp->ctx)->dsd_list); + &((struct crc_context *)sp->u.scmd.ctx)->dsd_list); sp->flags |= SRB_CRC_CTX_DSD_VALID; @@ -1043,11 +1045,12 @@ qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd, uint32_t *cur_dsd = dsd; int i; uint16_t used_dsds = tot_dsds; - scsi_qla_host_t *vha = shost_priv(sp->cmd->device->host); + struct scsi_cmnd *cmd = GET_CMD_SP(sp); + scsi_qla_host_t *vha = shost_priv(cmd->device->host); uint8_t *cp; - scsi_for_each_sg(sp->cmd, sg, tot_dsds, i) { + scsi_for_each_sg(cmd, sg, tot_dsds, i) { dma_addr_t sle_dma; /* Allocate additional continuation packets? */ @@ -1077,7 +1080,7 @@ qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd, } list_add_tail(&dsd_ptr->list, - &((struct crc_context *)sp->ctx)->dsd_list); + &((struct crc_context *)sp->u.scmd.ctx)->dsd_list); sp->flags |= SRB_CRC_CTX_DSD_VALID; @@ -1090,17 +1093,16 @@ qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd, sle_dma = sg_dma_address(sg); ql_dbg(ql_dbg_io, vha, 0x300a, "sg entry %d - addr=0x%x 0x%x, " "len=%d for cmd=%p.\n", - i, LSD(sle_dma), MSD(sle_dma), sg_dma_len(sg), - sp->cmd); + i, LSD(sle_dma), MSD(sle_dma), sg_dma_len(sg), cmd); *cur_dsd++ = cpu_to_le32(LSD(sle_dma)); *cur_dsd++ = cpu_to_le32(MSD(sle_dma)); *cur_dsd++ = cpu_to_le32(sg_dma_len(sg)); avail_dsds--; - if (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_PASS) { + if (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_PASS) { cp = page_address(sg_page(sg)) + sg->offset; ql_dbg(ql_dbg_io, vha, 0x300b, - "User data buffer=%p for cmd=%p.\n", cp, sp->cmd); + "User data buffer=%p for cmd=%p.\n", cp, cmd); } } /* Null termination */ @@ -1127,8 +1129,7 @@ qla24xx_walk_and_build_prot_sglist(struct qla_hw_data *ha, srb_t *sp, scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); uint8_t *cp; - - cmd = sp->cmd; + cmd = GET_CMD_SP(sp); scsi_for_each_prot_sg(cmd, sg, tot_dsds, i) { dma_addr_t sle_dma; @@ -1159,7 +1160,7 @@ qla24xx_walk_and_build_prot_sglist(struct qla_hw_data *ha, srb_t *sp, } list_add_tail(&dsd_ptr->list, - &((struct crc_context *)sp->ctx)->dsd_list); + &((struct crc_context *)sp->u.scmd.ctx)->dsd_list); sp->flags |= SRB_CRC_CTX_DSD_VALID; @@ -1170,7 +1171,7 @@ qla24xx_walk_and_build_prot_sglist(struct qla_hw_data *ha, srb_t *sp, cur_dsd = (uint32_t *)next_dsd; } sle_dma = sg_dma_address(sg); - if (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_PASS) { + if (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_PASS) { ql_dbg(ql_dbg_io, vha, 0x3027, "%s(): %p, sg_entry %d - " "addr=0x%x0x%x, len=%d.\n", @@ -1181,7 +1182,7 @@ qla24xx_walk_and_build_prot_sglist(struct qla_hw_data *ha, srb_t *sp, *cur_dsd++ = cpu_to_le32(MSD(sle_dma)); *cur_dsd++ = cpu_to_le32(sg_dma_len(sg)); - if (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_PASS) { + if (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_PASS) { cp = page_address(sg_page(sg)) + sg->offset; ql_dbg(ql_dbg_io, vha, 0x3028, "%s(): Protection Data buffer = %p.\n", __func__, @@ -1227,7 +1228,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, dma_addr_t crc_ctx_dma; char tag[2]; - cmd = sp->cmd; + cmd = GET_CMD_SP(sp); sgc = 0; /* Update entry type to indicate Command Type CRC_2 IOCB */ @@ -1255,15 +1256,15 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, __constant_cpu_to_le16(CF_READ_DATA); } - if ((scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_INSERT) || - (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_STRIP) || - (scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_STRIP) || - (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_INSERT)) + if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) || + (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP) || + (scsi_get_prot_op(cmd) == SCSI_PROT_READ_STRIP) || + (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_INSERT)) bundling = 0; /* Allocate CRC context from global pool */ - crc_ctx_pkt = sp->ctx = dma_pool_alloc(ha->dl_dma_pool, - GFP_ATOMIC, &crc_ctx_dma); + crc_ctx_pkt = sp->u.scmd.ctx = + dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC, &crc_ctx_dma); if (!crc_ctx_pkt) goto crc_queuing_error; @@ -1309,7 +1310,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, else if (cmd->sc_data_direction == DMA_FROM_DEVICE) fcp_cmnd->additional_cdb_len |= 2; - int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun); + int_to_scsilun(cmd->device->lun, &fcp_cmnd->lun); memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len); cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len); cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32( @@ -1344,7 +1345,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, blk_size = cmd->device->sector_size; dif_bytes = (data_bytes / blk_size) * 8; - switch (scsi_get_prot_op(sp->cmd)) { + switch (scsi_get_prot_op(GET_CMD_SP(sp))) { case SCSI_PROT_READ_INSERT: case SCSI_PROT_WRITE_STRIP: total_bytes = data_bytes; @@ -1444,7 +1445,7 @@ qla24xx_start_scsi(srb_t *sp) uint16_t tot_dsds; struct req_que *req = NULL; struct rsp_que *rsp = NULL; - struct scsi_cmnd *cmd = sp->cmd; + struct scsi_cmnd *cmd = GET_CMD_SP(sp); struct scsi_qla_host *vha = sp->fcport->vha; struct qla_hw_data *ha = vha->hw; char tag[2]; @@ -1509,7 +1510,7 @@ qla24xx_start_scsi(srb_t *sp) req->current_outstanding_cmd = handle; req->outstanding_cmds[handle] = sp; sp->handle = handle; - sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle; + cmd->host_scribble = (unsigned char *)(unsigned long)handle; req->cnt -= req_cnt; cmd_pkt = (struct cmd_type_7 *)req->ring_ptr; @@ -1528,7 +1529,7 @@ qla24xx_start_scsi(srb_t *sp) cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain; cmd_pkt->vp_index = sp->fcport->vp_idx; - int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun); + int_to_scsilun(cmd->device->lun, &cmd_pkt->lun); host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun)); /* Update tagged queuing modifier -- default is TSK_SIMPLE (0). */ @@ -1610,7 +1611,7 @@ qla24xx_dif_start_scsi(srb_t *sp) uint16_t fw_prot_opts = 0; struct req_que *req = NULL; struct rsp_que *rsp = NULL; - struct scsi_cmnd *cmd = sp->cmd; + struct scsi_cmnd *cmd = GET_CMD_SP(sp); struct scsi_qla_host *vha = sp->fcport->vha; struct qla_hw_data *ha = vha->hw; struct cmd_type_crc_2 *cmd_pkt; @@ -1727,7 +1728,7 @@ qla24xx_dif_start_scsi(srb_t *sp) req->current_outstanding_cmd = handle; req->outstanding_cmds[handle] = sp; sp->handle = handle; - sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle; + cmd->host_scribble = (unsigned char *)(unsigned long)handle; req->cnt -= req_cnt; /* Fill-in common area */ @@ -1743,7 +1744,7 @@ qla24xx_dif_start_scsi(srb_t *sp) cmd_pkt->port_id[1] = sp->fcport->d_id.b.area; cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain; - int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun); + int_to_scsilun(cmd->device->lun, &cmd_pkt->lun); host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun)); /* Total Data and protection segment(s) */ @@ -1796,7 +1797,7 @@ queuing_error: static void qla25xx_set_que(srb_t *sp, struct rsp_que **rsp) { - struct scsi_cmnd *cmd = sp->cmd; + struct scsi_cmnd *cmd = GET_CMD_SP(sp); struct qla_hw_data *ha = sp->fcport->vha->hw; int affinity = cmd->request->cpu; @@ -1817,7 +1818,6 @@ qla2x00_alloc_iocbs(scsi_qla_host_t *vha, srb_t *sp) uint32_t index, handle; request_t *pkt; uint16_t cnt, req_cnt; - struct srb_ctx *ctx; pkt = NULL; req_cnt = 1; @@ -1847,10 +1847,8 @@ qla2x00_alloc_iocbs(scsi_qla_host_t *vha, srb_t *sp) sp->handle = handle; /* Adjust entry-counts as needed. */ - if (sp->ctx) { - ctx = sp->ctx; - req_cnt = ctx->iocbs; - } + if (sp->type != SRB_SCSI_CMD) + req_cnt = sp->iocbs; skip_cmd_array: /* Check for room on request queue. */ @@ -1888,8 +1886,7 @@ queuing_error: static void qla24xx_login_iocb(srb_t *sp, struct logio_entry_24xx *logio) { - struct srb_ctx *ctx = sp->ctx; - struct srb_iocb *lio = ctx->u.iocb_cmd; + struct srb_iocb *lio = &sp->u.iocb_cmd; logio->entry_type = LOGINOUT_PORT_IOCB_TYPE; logio->control_flags = cpu_to_le16(LCF_COMMAND_PLOGI); @@ -1908,8 +1905,7 @@ static void qla2x00_login_iocb(srb_t *sp, struct mbx_entry *mbx) { struct qla_hw_data *ha = sp->fcport->vha->hw; - struct srb_ctx *ctx = sp->ctx; - struct srb_iocb *lio = ctx->u.iocb_cmd; + struct srb_iocb *lio = &sp->u.iocb_cmd; uint16_t opts; mbx->entry_type = MBX_IOCB_TYPE; @@ -1998,8 +1994,7 @@ qla24xx_tm_iocb(srb_t *sp, struct tsk_mgmt_entry *tsk) struct fc_port *fcport = sp->fcport; scsi_qla_host_t *vha = fcport->vha; struct qla_hw_data *ha = vha->hw; - struct srb_ctx *ctx = sp->ctx; - struct srb_iocb *iocb = ctx->u.iocb_cmd; + struct srb_iocb *iocb = &sp->u.iocb_cmd; struct req_que *req = vha->req; flags = iocb->u.tmf.flags; @@ -2026,7 +2021,7 @@ qla24xx_tm_iocb(srb_t *sp, struct tsk_mgmt_entry *tsk) static void qla24xx_els_iocb(srb_t *sp, struct els_entry_24xx *els_iocb) { - struct fc_bsg_job *bsg_job = ((struct srb_ctx *)sp->ctx)->u.bsg_job; + struct fc_bsg_job *bsg_job = sp->u.bsg_job; els_iocb->entry_type = ELS_IOCB_TYPE; els_iocb->entry_count = 1; @@ -2040,7 +2035,7 @@ qla24xx_els_iocb(srb_t *sp, struct els_entry_24xx *els_iocb) els_iocb->rx_dsd_count = __constant_cpu_to_le16(bsg_job->reply_payload.sg_cnt); els_iocb->opcode = - (((struct srb_ctx *)sp->ctx)->type == SRB_ELS_CMD_RPT) ? + sp->type == SRB_ELS_CMD_RPT ? bsg_job->request->rqst_data.r_els.els_code : bsg_job->request->rqst_data.h_els.command_code; els_iocb->port_id[0] = sp->fcport->d_id.b.al_pa; @@ -2077,7 +2072,7 @@ qla2x00_ct_iocb(srb_t *sp, ms_iocb_entry_t *ct_iocb) uint16_t tot_dsds; scsi_qla_host_t *vha = sp->fcport->vha; struct qla_hw_data *ha = vha->hw; - struct fc_bsg_job *bsg_job = ((struct srb_ctx *)sp->ctx)->u.bsg_job; + struct fc_bsg_job *bsg_job = sp->u.bsg_job; int loop_iterartion = 0; int cont_iocb_prsnt = 0; int entry_count = 1; @@ -2154,7 +2149,7 @@ qla24xx_ct_iocb(srb_t *sp, struct ct_entry_24xx *ct_iocb) uint16_t tot_dsds; scsi_qla_host_t *vha = sp->fcport->vha; struct qla_hw_data *ha = vha->hw; - struct fc_bsg_job *bsg_job = ((struct srb_ctx *)sp->ctx)->u.bsg_job; + struct fc_bsg_job *bsg_job = sp->u.bsg_job; int loop_iterartion = 0; int cont_iocb_prsnt = 0; int entry_count = 1; @@ -2244,12 +2239,12 @@ qla82xx_start_scsi(srb_t *sp) struct qla_hw_data *ha = vha->hw; struct req_que *req = NULL; struct rsp_que *rsp = NULL; - char tag[2]; + char tag[2]; /* Setup device pointers. */ ret = 0; reg = &ha->iobase->isp82; - cmd = sp->cmd; + cmd = GET_CMD_SP(sp); req = vha->req; rsp = ha->rsp_q_map[0]; @@ -2353,12 +2348,14 @@ sufficient_dsds: if (req->cnt < (req_cnt + 2)) goto queuing_error; - ctx = sp->ctx = mempool_alloc(ha->ctx_mempool, GFP_ATOMIC); - if (!sp->ctx) { + ctx = sp->u.scmd.ctx = + mempool_alloc(ha->ctx_mempool, GFP_ATOMIC); + if (!ctx) { ql_log(ql_log_fatal, vha, 0x3010, "Failed to allocate ctx for cmd=%p.\n", cmd); goto queuing_error; } + memset(ctx, 0, sizeof(struct ct6_dsd)); ctx->fcp_cmnd = dma_pool_alloc(ha->fcp_cmnd_dma_pool, GFP_ATOMIC, &ctx->fcp_cmnd_dma); @@ -2409,12 +2406,12 @@ sufficient_dsds: if (qla24xx_build_scsi_type_6_iocbs(sp, cmd_pkt, tot_dsds)) goto queuing_error_fcp_cmnd; - int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun); + int_to_scsilun(cmd->device->lun, &cmd_pkt->lun); host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun)); /* build FCP_CMND IU */ memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd)); - int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun); + int_to_scsilun(cmd->device->lun, &ctx->fcp_cmnd->lun); ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len; if (cmd->sc_data_direction == DMA_TO_DEVICE) @@ -2494,9 +2491,9 @@ sufficient_dsds: cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain; cmd_pkt->vp_index = sp->fcport->vp_idx; - int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun); + int_to_scsilun(cmd->device->lun, &cmd_pkt->lun); host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, - sizeof(cmd_pkt->lun)); + sizeof(cmd_pkt->lun)); /* * Update tagged queuing modifier -- default is TSK_SIMPLE (0). @@ -2537,7 +2534,7 @@ sufficient_dsds: req->current_outstanding_cmd = handle; req->outstanding_cmds[handle] = sp; sp->handle = handle; - sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle; + cmd->host_scribble = (unsigned char *)(unsigned long)handle; req->cnt -= req_cnt; wmb(); @@ -2583,9 +2580,9 @@ queuing_error: if (tot_dsds) scsi_dma_unmap(cmd); - if (sp->ctx) { - mempool_free(sp->ctx, ha->ctx_mempool); - sp->ctx = NULL; + if (sp->u.scmd.ctx) { + mempool_free(sp->u.scmd.ctx, ha->ctx_mempool); + sp->u.scmd.ctx = NULL; } spin_unlock_irqrestore(&ha->hardware_lock, flags); @@ -2598,7 +2595,6 @@ qla2x00_start_sp(srb_t *sp) int rval; struct qla_hw_data *ha = sp->fcport->vha->hw; void *pkt; - struct srb_ctx *ctx = sp->ctx; unsigned long flags; rval = QLA_FUNCTION_FAILED; @@ -2611,7 +2607,7 @@ qla2x00_start_sp(srb_t *sp) } rval = QLA_SUCCESS; - switch (ctx->type) { + switch (sp->type) { case SRB_LOGIN_CMD: IS_FWI2_CAPABLE(ha) ? qla24xx_login_iocb(sp, pkt) : diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 18e7d961aa0..87f2611c380 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -853,8 +853,7 @@ qla2x00_process_completed_request(struct scsi_qla_host *vha, req->outstanding_cmds[index] = NULL; /* Save ISP completion status */ - sp->cmd->result = DID_OK << 16; - qla2x00_sp_compl(ha, sp); + sp->done(ha, sp, DID_OK << 16); } else { ql_log(ql_log_warn, vha, 0x3016, "Invalid SCSI SRB.\n"); @@ -911,7 +910,6 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, fc_port_t *fcport; srb_t *sp; struct srb_iocb *lio; - struct srb_ctx *ctx; uint16_t *data; uint16_t status; @@ -919,9 +917,8 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, if (!sp) return; - ctx = sp->ctx; - lio = ctx->u.iocb_cmd; - type = ctx->name; + lio = &sp->u.iocb_cmd; + type = sp->name; fcport = sp->fcport; data = lio->u.logio.data; @@ -945,7 +942,7 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, } status = le16_to_cpu(mbx->status); - if (status == 0x30 && ctx->type == SRB_LOGIN_CMD && + if (status == 0x30 && sp->type == SRB_LOGIN_CMD && le16_to_cpu(mbx->mb0) == MBS_COMMAND_COMPLETE) status = 0; if (!status && le16_to_cpu(mbx->mb0) == MBS_COMMAND_COMPLETE) { @@ -956,7 +953,7 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, le16_to_cpu(mbx->mb1)); data[0] = MBS_COMMAND_COMPLETE; - if (ctx->type == SRB_LOGIN_CMD) { + if (sp->type == SRB_LOGIN_CMD) { fcport->port_type = FCT_TARGET; if (le16_to_cpu(mbx->mb1) & BIT_0) fcport->port_type = FCT_INITIATOR; @@ -987,7 +984,7 @@ qla2x00_mbx_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, le16_to_cpu(mbx->mb7)); logio_done: - lio->done(sp); + sp->done(vha, sp, 0); } static void @@ -996,29 +993,18 @@ qla2x00_ct_entry(scsi_qla_host_t *vha, struct req_que *req, { const char func[] = "CT_IOCB"; const char *type; - struct qla_hw_data *ha = vha->hw; srb_t *sp; - struct srb_ctx *sp_bsg; struct fc_bsg_job *bsg_job; uint16_t comp_status; + int res; sp = qla2x00_get_sp_from_handle(vha, func, req, pkt); if (!sp) return; - sp_bsg = sp->ctx; - bsg_job = sp_bsg->u.bsg_job; + bsg_job = sp->u.bsg_job; - type = NULL; - switch (sp_bsg->type) { - case SRB_CT_CMD: - type = "ct pass-through"; - break; - default: - ql_log(ql_log_warn, vha, 0x5047, - "Unrecognized SRB: (%p) type=%d.\n", sp, sp_bsg->type); - return; - } + type = "ct pass-through"; comp_status = le16_to_cpu(pkt->comp_status); @@ -1030,7 +1016,7 @@ qla2x00_ct_entry(scsi_qla_host_t *vha, struct req_que *req, if (comp_status != CS_COMPLETE) { if (comp_status == CS_DATA_UNDERRUN) { - bsg_job->reply->result = DID_OK << 16; + res = DID_OK << 16; bsg_job->reply->reply_payload_rcv_len = le16_to_cpu(((sts_entry_t *)pkt)->rsp_info_len); @@ -1043,30 +1029,19 @@ qla2x00_ct_entry(scsi_qla_host_t *vha, struct req_que *req, ql_log(ql_log_warn, vha, 0x5049, "CT pass-through-%s error " "comp_status-status=0x%x.\n", type, comp_status); - bsg_job->reply->result = DID_ERROR << 16; + res = DID_ERROR << 16; bsg_job->reply->reply_payload_rcv_len = 0; } ql_dump_buffer(ql_dbg_async + ql_dbg_buffer, vha, 0x5035, (uint8_t *)pkt, sizeof(*pkt)); } else { - bsg_job->reply->result = DID_OK << 16; + res = DID_OK << 16; bsg_job->reply->reply_payload_rcv_len = bsg_job->reply_payload.payload_len; bsg_job->reply_len = 0; } - dma_unmap_sg(&ha->pdev->dev, bsg_job->request_payload.sg_list, - bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); - - dma_unmap_sg(&ha->pdev->dev, bsg_job->reply_payload.sg_list, - bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); - - if (sp_bsg->type == SRB_ELS_CMD_HST || sp_bsg->type == SRB_CT_CMD) - kfree(sp->fcport); - - kfree(sp->ctx); - mempool_free(sp, ha->srb_mempool); - bsg_job->job_done(bsg_job); + sp->done(vha, sp, res); } static void @@ -1075,22 +1050,20 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req, { const char func[] = "ELS_CT_IOCB"; const char *type; - struct qla_hw_data *ha = vha->hw; srb_t *sp; - struct srb_ctx *sp_bsg; struct fc_bsg_job *bsg_job; uint16_t comp_status; uint32_t fw_status[3]; uint8_t* fw_sts_ptr; + int res; sp = qla2x00_get_sp_from_handle(vha, func, req, pkt); if (!sp) return; - sp_bsg = sp->ctx; - bsg_job = sp_bsg->u.bsg_job; + bsg_job = sp->u.bsg_job; type = NULL; - switch (sp_bsg->type) { + switch (sp->type) { case SRB_ELS_CMD_RPT: case SRB_ELS_CMD_HST: type = "els"; @@ -1100,7 +1073,7 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req, break; default: ql_log(ql_log_warn, vha, 0x503e, - "Unrecognized SRB: (%p) type=%d.\n", sp, sp_bsg->type); + "Unrecognized SRB: (%p) type=%d.\n", sp, sp->type); return; } @@ -1116,9 +1089,9 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req, if (comp_status != CS_COMPLETE) { if (comp_status == CS_DATA_UNDERRUN) { - bsg_job->reply->result = DID_OK << 16; + res = DID_OK << 16; bsg_job->reply->reply_payload_rcv_len = - le16_to_cpu(((struct els_sts_entry_24xx*)pkt)->total_byte_count); + le16_to_cpu(((struct els_sts_entry_24xx *)pkt)->total_byte_count); ql_log(ql_log_info, vha, 0x503f, "ELS-CT pass-through-%s error hdl=%x comp_status-status=0x%x " @@ -1138,7 +1111,7 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req, pkt)->error_subcode_1), le16_to_cpu(((struct els_sts_entry_24xx *) pkt)->error_subcode_2)); - bsg_job->reply->result = DID_ERROR << 16; + res = DID_ERROR << 16; bsg_job->reply->reply_payload_rcv_len = 0; fw_sts_ptr = ((uint8_t*)bsg_job->req->sense) + sizeof(struct fc_bsg_reply); memcpy( fw_sts_ptr, fw_status, sizeof(fw_status)); @@ -1147,23 +1120,12 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req, (uint8_t *)pkt, sizeof(*pkt)); } else { - bsg_job->reply->result = DID_OK << 16; + res = DID_OK << 16; bsg_job->reply->reply_payload_rcv_len = bsg_job->reply_payload.payload_len; bsg_job->reply_len = 0; } - dma_unmap_sg(&ha->pdev->dev, - bsg_job->request_payload.sg_list, - bsg_job->request_payload.sg_cnt, DMA_TO_DEVICE); - dma_unmap_sg(&ha->pdev->dev, - bsg_job->reply_payload.sg_list, - bsg_job->reply_payload.sg_cnt, DMA_FROM_DEVICE); - if ((sp_bsg->type == SRB_ELS_CMD_HST) || - (sp_bsg->type == SRB_CT_CMD)) - kfree(sp->fcport); - kfree(sp->ctx); - mempool_free(sp, ha->srb_mempool); - bsg_job->job_done(bsg_job); + sp->done(vha, sp, res); } static void @@ -1175,7 +1137,6 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, fc_port_t *fcport; srb_t *sp; struct srb_iocb *lio; - struct srb_ctx *ctx; uint16_t *data; uint32_t iop[2]; @@ -1183,9 +1144,8 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, if (!sp) return; - ctx = sp->ctx; - lio = ctx->u.iocb_cmd; - type = ctx->name; + lio = &sp->u.iocb_cmd; + type = sp->name; fcport = sp->fcport; data = lio->u.logio.data; @@ -1213,7 +1173,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, le32_to_cpu(logio->io_parameter[0])); data[0] = MBS_COMMAND_COMPLETE; - if (ctx->type != SRB_LOGIN_CMD) + if (sp->type != SRB_LOGIN_CMD) goto logio_done; iop[0] = le32_to_cpu(logio->io_parameter[0]); @@ -1256,7 +1216,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, le32_to_cpu(logio->io_parameter[1])); logio_done: - lio->done(sp); + sp->done(vha, sp, 0); } static void @@ -1268,7 +1228,6 @@ qla24xx_tm_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, fc_port_t *fcport; srb_t *sp; struct srb_iocb *iocb; - struct srb_ctx *ctx; struct sts_entry_24xx *sts = (struct sts_entry_24xx *)tsk; int error = 1; @@ -1276,9 +1235,8 @@ qla24xx_tm_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, if (!sp) return; - ctx = sp->ctx; - iocb = ctx->u.iocb_cmd; - type = ctx->name; + iocb = &sp->u.iocb_cmd; + type = sp->name; fcport = sp->fcport; if (sts->entry_status) { @@ -1312,7 +1270,7 @@ qla24xx_tm_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, (uint8_t *)sts, sizeof(*sts)); } - iocb->done(sp); + sp->done(vha, sp, 0); } /** @@ -1398,25 +1356,32 @@ qla2x00_process_response_queue(struct rsp_que *rsp) static inline void qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t par_sense_len, - uint32_t sense_len, struct rsp_que *rsp) + uint32_t sense_len, struct rsp_que *rsp, int res) { struct scsi_qla_host *vha = sp->fcport->vha; - struct scsi_cmnd *cp = sp->cmd; + struct scsi_cmnd *cp = GET_CMD_SP(sp); + uint32_t track_sense_len; if (sense_len >= SCSI_SENSE_BUFFERSIZE) sense_len = SCSI_SENSE_BUFFERSIZE; - sp->request_sense_length = sense_len; - sp->request_sense_ptr = cp->sense_buffer; - if (sp->request_sense_length > par_sense_len) + SET_CMD_SENSE_LEN(sp, sense_len); + SET_CMD_SENSE_PTR(sp, cp->sense_buffer); + track_sense_len = sense_len; + + if (sense_len > par_sense_len) sense_len = par_sense_len; memcpy(cp->sense_buffer, sense_data, sense_len); - sp->request_sense_ptr += sense_len; - sp->request_sense_length -= sense_len; - if (sp->request_sense_length != 0) + SET_CMD_SENSE_PTR(sp, cp->sense_buffer + sense_len); + track_sense_len -= sense_len; + SET_CMD_SENSE_LEN(sp, track_sense_len); + + if (track_sense_len != 0) { rsp->status_srb = sp; + cp->result = res; + } if (sense_len) { ql_dbg(ql_dbg_io + ql_dbg_buffer, vha, 0x301c, @@ -1444,7 +1409,7 @@ static inline int qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24) { struct scsi_qla_host *vha = sp->fcport->vha; - struct scsi_cmnd *cmd = sp->cmd; + struct scsi_cmnd *cmd = GET_CMD_SP(sp); uint8_t *ap = &sts24->data[12]; uint8_t *ep = &sts24->data[20]; uint32_t e_ref_tag, a_ref_tag; @@ -1588,6 +1553,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) uint16_t que; struct req_que *req; int logit = 1; + int res = 0; sts = (sts_entry_t *) pkt; sts24 = (struct sts_entry_24xx *) pkt; @@ -1627,7 +1593,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) qla2xxx_wake_dpc(vha); return; } - cp = sp->cmd; + cp = GET_CMD_SP(sp); if (cp == NULL) { ql_dbg(ql_dbg_io, vha, 0x3018, "Command already returned (0x%x/%p).\n", @@ -1680,7 +1646,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) "FCP I/O protocol failure (0x%x/0x%x).\n", rsp_info_len, rsp_info[3]); - cp->result = DID_BUS_BUSY << 16; + res = DID_BUS_BUSY << 16; goto out; } } @@ -1697,7 +1663,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) case CS_COMPLETE: case CS_QUEUE_FULL: if (scsi_status == 0) { - cp->result = DID_OK << 16; + res = DID_OK << 16; break; } if (scsi_status & (SS_RESIDUAL_UNDER | SS_RESIDUAL_OVER)) { @@ -1712,11 +1678,11 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) "detected (0x%x of 0x%x bytes).\n", resid, scsi_bufflen(cp)); - cp->result = DID_ERROR << 16; + res = DID_ERROR << 16; break; } } - cp->result = DID_OK << 16 | lscsi_status; + res = DID_OK << 16 | lscsi_status; if (lscsi_status == SAM_STAT_TASK_SET_FULL) { ql_dbg(ql_dbg_io, vha, 0x301b, @@ -1732,7 +1698,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) break; qla2x00_handle_sense(sp, sense_data, par_sense_len, sense_len, - rsp); + rsp, res); break; case CS_DATA_UNDERRUN: @@ -1746,7 +1712,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) "(0x%x of 0x%x bytes).\n", resid, scsi_bufflen(cp)); - cp->result = DID_ERROR << 16 | lscsi_status; + res = DID_ERROR << 16 | lscsi_status; goto check_scsi_status; } @@ -1758,7 +1724,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) "detected (0x%x of 0x%x bytes).\n", resid, scsi_bufflen(cp)); - cp->result = DID_ERROR << 16; + res = DID_ERROR << 16; break; } } else { @@ -1766,11 +1732,11 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) "Dropped frame(s) detected (0x%x " "of 0x%x bytes).\n", resid, scsi_bufflen(cp)); - cp->result = DID_ERROR << 16 | lscsi_status; + res = DID_ERROR << 16 | lscsi_status; goto check_scsi_status; } - cp->result = DID_OK << 16 | lscsi_status; + res = DID_OK << 16 | lscsi_status; logit = 0; check_scsi_status: @@ -1793,7 +1759,7 @@ check_scsi_status: break; qla2x00_handle_sense(sp, sense_data, par_sense_len, - sense_len, rsp); + sense_len, rsp, res); } break; @@ -1810,7 +1776,7 @@ check_scsi_status: * while we try to recover so instruct the mid layer * to requeue until the class decides how to handle this. */ - cp->result = DID_TRANSPORT_DISRUPTED << 16; + res = DID_TRANSPORT_DISRUPTED << 16; if (comp_status == CS_TIMEOUT) { if (IS_FWI2_CAPABLE(ha)) @@ -1829,14 +1795,14 @@ check_scsi_status: break; case CS_ABORTED: - cp->result = DID_RESET << 16; + res = DID_RESET << 16; break; case CS_DIF_ERROR: logit = qla2x00_handle_dif_error(sp, sts24); break; default: - cp->result = DID_ERROR << 16; + res = DID_ERROR << 16; break; } @@ -1847,7 +1813,7 @@ out: "nexus=%ld:%d:%d portid=%02x%02x%02x oxid=0x%x " "cdb=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x len=0x%x " "rsp_info=0x%x resid=0x%x fw_resid=0x%x.\n", - comp_status, scsi_status, cp->result, vha->host_no, + comp_status, scsi_status, res, vha->host_no, cp->device->id, cp->device->lun, fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa, ox_id, cp->cmnd[0], cp->cmnd[1], cp->cmnd[2], cp->cmnd[3], @@ -1856,7 +1822,7 @@ out: resid_len, fw_resid_len); if (rsp->status_srb == NULL) - qla2x00_sp_compl(ha, sp); + sp->done(ha, sp, res); } /** @@ -1869,84 +1835,52 @@ out: static void qla2x00_status_cont_entry(struct rsp_que *rsp, sts_cont_entry_t *pkt) { - uint8_t sense_sz = 0; + uint8_t sense_sz = 0; struct qla_hw_data *ha = rsp->hw; struct scsi_qla_host *vha = pci_get_drvdata(ha->pdev); - srb_t *sp = rsp->status_srb; + srb_t *sp = rsp->status_srb; struct scsi_cmnd *cp; + uint32_t sense_len; + uint8_t *sense_ptr; - if (sp != NULL && sp->request_sense_length != 0) { - cp = sp->cmd; - if (cp == NULL) { - ql_log(ql_log_warn, vha, 0x3025, - "cmd is NULL: already returned to OS (sp=%p).\n", - sp); + if (!sp || !GET_CMD_SENSE_LEN(sp)) + return; - rsp->status_srb = NULL; - return; - } + sense_len = GET_CMD_SENSE_LEN(sp); + sense_ptr = GET_CMD_SENSE_PTR(sp); - if (sp->request_sense_length > sizeof(pkt->data)) { - sense_sz = sizeof(pkt->data); - } else { - sense_sz = sp->request_sense_length; - } + cp = GET_CMD_SP(sp); + if (cp == NULL) { + ql_log(ql_log_warn, vha, 0x3025, + "cmd is NULL: already returned to OS (sp=%p).\n", sp); - /* Move sense data. */ - if (IS_FWI2_CAPABLE(ha)) - host_to_fcp_swap(pkt->data, sizeof(pkt->data)); - memcpy(sp->request_sense_ptr, pkt->data, sense_sz); - ql_dump_buffer(ql_dbg_io + ql_dbg_buffer, vha, 0x302c, - sp->request_sense_ptr, sense_sz); - - sp->request_sense_ptr += sense_sz; - sp->request_sense_length -= sense_sz; - - /* Place command on done queue. */ - if (sp->request_sense_length == 0) { - rsp->status_srb = NULL; - qla2x00_sp_compl(ha, sp); - } + rsp->status_srb = NULL; + return; } -} -static int -qla2x00_free_sp_ctx(scsi_qla_host_t *vha, srb_t *sp) -{ - struct qla_hw_data *ha = vha->hw; - struct srb_ctx *ctx; + if (sense_len > sizeof(pkt->data)) + sense_sz = sizeof(pkt->data); + else + sense_sz = sense_len; - if (!sp->ctx) - return 1; + /* Move sense data. */ + if (IS_FWI2_CAPABLE(ha)) + host_to_fcp_swap(pkt->data, sizeof(pkt->data)); + memcpy(sense_ptr, pkt->data, sense_sz); + ql_dump_buffer(ql_dbg_io + ql_dbg_buffer, vha, 0x302c, + sense_ptr, sense_sz); - ctx = sp->ctx; + sense_len -= sense_sz; + sense_ptr += sense_sz; - if (ctx->type == SRB_LOGIN_CMD || - ctx->type == SRB_LOGOUT_CMD || - ctx->type == SRB_TM_CMD) { - ctx->u.iocb_cmd->done(sp); - return 0; - } else if (ctx->type == SRB_ADISC_CMD) { - ctx->u.iocb_cmd->free(sp); - return 0; - } else { - struct fc_bsg_job *bsg_job; - - bsg_job = ctx->u.bsg_job; - if (ctx->type == SRB_ELS_CMD_HST || - ctx->type == SRB_CT_CMD) - kfree(sp->fcport); - - bsg_job->reply->reply_data.ctels_reply.status = - FC_CTELS_STATUS_OK; - bsg_job->reply->result = DID_ERROR << 16; - bsg_job->reply->reply_payload_rcv_len = 0; - kfree(sp->ctx); - mempool_free(sp, ha->srb_mempool); - bsg_job->job_done(bsg_job); - return 0; + SET_CMD_SENSE_PTR(sp, sense_ptr); + SET_CMD_SENSE_LEN(sp, sense_len); + + /* Place command on done queue. */ + if (sense_len == 0) { + rsp->status_srb = NULL; + sp->done(ha, sp, cp->result); } - return 1; } /** @@ -1962,43 +1896,18 @@ qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt) const char func[] = "ERROR-IOCB"; uint16_t que = MSW(pkt->handle); struct req_que *req = ha->req_q_map[que]; + int res = DID_ERROR << 16; - if (pkt->entry_status & RF_INV_E_ORDER) - ql_dbg(ql_dbg_async, vha, 0x502a, - "Invalid Entry Order.\n"); - else if (pkt->entry_status & RF_INV_E_COUNT) - ql_dbg(ql_dbg_async, vha, 0x502b, - "Invalid Entry Count.\n"); - else if (pkt->entry_status & RF_INV_E_PARAM) - ql_dbg(ql_dbg_async, vha, 0x502c, - "Invalid Entry Parameter.\n"); - else if (pkt->entry_status & RF_INV_E_TYPE) - ql_dbg(ql_dbg_async, vha, 0x502d, - "Invalid Entry Type.\n"); - else if (pkt->entry_status & RF_BUSY) - ql_dbg(ql_dbg_async, vha, 0x502e, - "Busy.\n"); - else - ql_dbg(ql_dbg_async, vha, 0x502f, - "UNKNOWN flag error.\n"); + ql_dbg(ql_dbg_async, vha, 0x502a, + "type of error status in response: 0x%x\n", pkt->entry_status); + + if (pkt->entry_status & RF_BUSY) + res = DID_BUS_BUSY << 16; sp = qla2x00_get_sp_from_handle(vha, func, req, pkt); - if (sp) { - if (qla2x00_free_sp_ctx(vha, sp)) { - if (pkt->entry_status & - (RF_INV_E_ORDER | RF_INV_E_COUNT | - RF_INV_E_PARAM | RF_INV_E_TYPE)) { - sp->cmd->result = DID_ERROR << 16; - } else if (pkt->entry_status & RF_BUSY) { - sp->cmd->result = DID_BUS_BUSY << 16; - } else { - sp->cmd->result = DID_ERROR << 16; - } - qla2x00_sp_compl(ha, sp); - } - } else if (pkt->entry_type == COMMAND_A64_TYPE || pkt->entry_type == - COMMAND_TYPE || pkt->entry_type == COMMAND_TYPE_7 - || pkt->entry_type == COMMAND_TYPE_6) { + if (sp) + sp->done(ha, sp, res); + else { ql_log(ql_log_warn, vha, 0x5030, "Error entry - invalid handle.\n"); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index be520a9d0b7..50ec272b61d 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -874,6 +874,7 @@ qla2x00_abort_command(srb_t *sp) scsi_qla_host_t *vha = fcport->vha; struct qla_hw_data *ha = vha->hw; struct req_que *req = vha->req; + struct scsi_cmnd *cmd = GET_CMD_SP(sp); ql_dbg(ql_dbg_mbx, vha, 0x103b, "Entered %s.\n", __func__); @@ -896,7 +897,7 @@ qla2x00_abort_command(srb_t *sp) mcp->mb[1] = fcport->loop_id << 8; mcp->mb[2] = (uint16_t)handle; mcp->mb[3] = (uint16_t)(handle >> 16); - mcp->mb[6] = (uint16_t)sp->cmd->device->lun; + mcp->mb[6] = (uint16_t)cmd->device->lun; mcp->out_mb = MBX_6|MBX_3|MBX_2|MBX_1|MBX_0; mcp->in_mb = MBX_0; mcp->tov = MBX_TOV_SECONDS; diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 34fb91904fd..0a2f2d57880 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -3608,7 +3608,7 @@ qla82xx_chip_reset_cleanup(scsi_qla_host_t *vha) for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { sp = req->outstanding_cmds[cnt]; if (sp) { - if (!sp->ctx || + if (!sp->u.scmd.ctx || (sp->flags & SRB_FCP_CMND_DMA_VALID)) { spin_unlock_irqrestore( &ha->hardware_lock, flags); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 79c752eef99..a8de6a3de49 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -304,7 +304,6 @@ static int qla2x00_mem_alloc(struct qla_hw_data *, uint16_t, uint16_t, struct req_que **, struct rsp_que **); static void qla2x00_free_fw_dump(struct qla_hw_data *); static void qla2x00_mem_free(struct qla_hw_data *); -static void qla2x00_sp_free_dma(srb_t *); /* -------------------------------------------------------------------------- */ static int qla2x00_alloc_queues(struct qla_hw_data *ha) @@ -559,28 +558,75 @@ qla24xx_fw_version_str(struct scsi_qla_host *vha, char *str) return str; } -static inline srb_t * -qla2x00_get_new_sp(scsi_qla_host_t *vha, fc_port_t *fcport, - struct scsi_cmnd *cmd) +void +qla2x00_sp_free_dma(void *vha, void *ptr) { - srb_t *sp; - struct qla_hw_data *ha = vha->hw; + srb_t *sp = (srb_t *)ptr; + struct scsi_cmnd *cmd = GET_CMD_SP(sp); + struct qla_hw_data *ha = sp->fcport->vha->hw; + void *ctx = GET_CMD_CTX_SP(sp); - sp = mempool_alloc(ha->srb_mempool, GFP_ATOMIC); - if (!sp) { - ql_log(ql_log_warn, vha, 0x3006, - "Memory allocation failed for sp.\n"); - return sp; + if (sp->flags & SRB_DMA_VALID) { + scsi_dma_unmap(cmd); + sp->flags &= ~SRB_DMA_VALID; } - atomic_set(&sp->ref_count, 1); - sp->fcport = fcport; - sp->cmd = cmd; - sp->flags = 0; - CMD_SP(cmd) = (void *)sp; - sp->ctx = NULL; + if (sp->flags & SRB_CRC_PROT_DMA_VALID) { + dma_unmap_sg(&ha->pdev->dev, scsi_prot_sglist(cmd), + scsi_prot_sg_count(cmd), cmd->sc_data_direction); + sp->flags &= ~SRB_CRC_PROT_DMA_VALID; + } + + if (sp->flags & SRB_CRC_CTX_DSD_VALID) { + /* List assured to be having elements */ + qla2x00_clean_dsd_pool(ha, sp); + sp->flags &= ~SRB_CRC_CTX_DSD_VALID; + } + + if (sp->flags & SRB_CRC_CTX_DMA_VALID) { + dma_pool_free(ha->dl_dma_pool, ctx, + ((struct crc_context *)ctx)->crc_ctx_dma); + sp->flags &= ~SRB_CRC_CTX_DMA_VALID; + } + + if (sp->flags & SRB_FCP_CMND_DMA_VALID) { + struct ct6_dsd *ctx1 = (struct ct6_dsd *)ctx; + + dma_pool_free(ha->fcp_cmnd_dma_pool, ctx1->fcp_cmnd, + ctx1->fcp_cmnd_dma); + list_splice(&ctx1->dsd_list, &ha->gbl_dsd_list); + ha->gbl_dsd_inuse -= ctx1->dsd_use_cnt; + ha->gbl_dsd_avail += ctx1->dsd_use_cnt; + mempool_free(ctx1, ha->ctx_mempool); + ctx1 = NULL; + } + + CMD_SP(cmd) = NULL; + mempool_free(sp, ha->srb_mempool); +} + +static void +qla2x00_sp_compl(void *data, void *ptr, int res) +{ + struct qla_hw_data *ha = (struct qla_hw_data *)data; + srb_t *sp = (srb_t *)ptr; + struct scsi_cmnd *cmd = GET_CMD_SP(sp); + + cmd->result = res; + + if (atomic_read(&sp->ref_count) == 0) { + ql_dbg(ql_dbg_io, sp->fcport->vha, 0x3015, + "SP reference-count to ZERO -- sp=%p cmd=%p.\n", + sp, GET_CMD_SP(sp)); + if (ql2xextended_error_logging & ql_dbg_io) + BUG(); + return; + } + if (!atomic_dec_and_test(&sp->ref_count)) + return; - return sp; + qla2x00_sp_free_dma(ha, sp); + cmd->scsi_done(cmd); } static int @@ -644,10 +690,17 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) goto qc24_target_busy; } - sp = qla2x00_get_new_sp(base_vha, fcport, cmd); + sp = qla2x00_get_sp(base_vha, fcport, GFP_ATOMIC); if (!sp) goto qc24_host_busy; + sp->u.scmd.cmd = cmd; + sp->type = SRB_SCSI_CMD; + atomic_set(&sp->ref_count, 1); + CMD_SP(cmd) = (void *)sp; + sp->free = qla2x00_sp_free_dma; + sp->done = qla2x00_sp_compl; + rval = ha->isp_ops->start_scsi(sp); if (rval != QLA_SUCCESS) { ql_dbg(ql_dbg_io, vha, 0x3013, @@ -658,8 +711,7 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) return 0; qc24_host_busy_free_sp: - qla2x00_sp_free_dma(sp); - mempool_free(sp, ha->srb_mempool); + qla2x00_sp_free_dma(ha, sp); qc24_host_busy: return SCSI_MLQUEUE_HOST_BUSY; @@ -893,7 +945,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) } spin_lock_irqsave(&ha->hardware_lock, flags); - qla2x00_sp_compl(ha, sp); + sp->done(ha, sp, 0); spin_unlock_irqrestore(&ha->hardware_lock, flags); /* Did the command return during mailbox execution? */ @@ -925,6 +977,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *vha, unsigned int t, struct qla_hw_data *ha = vha->hw; struct req_que *req; srb_t *sp; + struct scsi_cmnd *cmd; status = QLA_SUCCESS; @@ -935,28 +988,29 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *vha, unsigned int t, sp = req->outstanding_cmds[cnt]; if (!sp) continue; - if ((sp->ctx) && !IS_PROT_IO(sp)) + if (sp->type != SRB_SCSI_CMD) continue; if (vha->vp_idx != sp->fcport->vha->vp_idx) continue; match = 0; + cmd = GET_CMD_SP(sp); switch (type) { case WAIT_HOST: match = 1; break; case WAIT_TARGET: - match = sp->cmd->device->id == t; + match = cmd->device->id == t; break; case WAIT_LUN: - match = (sp->cmd->device->id == t && - sp->cmd->device->lun == l); + match = (cmd->device->id == t && + cmd->device->lun == l); break; } if (!match) continue; spin_unlock_irqrestore(&ha->hardware_lock, flags); - status = qla2x00_eh_wait_on_command(sp->cmd); + status = qla2x00_eh_wait_on_command(cmd); spin_lock_irqsave(&ha->hardware_lock, flags); } spin_unlock_irqrestore(&ha->hardware_lock, flags); @@ -1249,7 +1303,6 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) int que, cnt; unsigned long flags; srb_t *sp; - struct srb_ctx *ctx; struct qla_hw_data *ha = vha->hw; struct req_que *req; @@ -1262,31 +1315,7 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) sp = req->outstanding_cmds[cnt]; if (sp) { req->outstanding_cmds[cnt] = NULL; - if (!sp->ctx || - (sp->flags & SRB_FCP_CMND_DMA_VALID) || - IS_PROT_IO(sp)) { - sp->cmd->result = res; - qla2x00_sp_compl(ha, sp); - } else { - ctx = sp->ctx; - if (ctx->type == SRB_ELS_CMD_RPT || - ctx->type == SRB_ELS_CMD_HST || - ctx->type == SRB_CT_CMD) { - struct fc_bsg_job *bsg_job = - ctx->u.bsg_job; - if (bsg_job->request->msgcode - == FC_BSG_HST_CT) - kfree(sp->fcport); - bsg_job->req->errors = 0; - bsg_job->reply->result = res; - bsg_job->job_done(bsg_job); - kfree(sp->ctx); - mempool_free(sp, - ha->srb_mempool); - } else { - ctx->u.iocb_cmd->free(sp); - } - } + sp->done(vha, sp, res); } } } @@ -3820,75 +3849,6 @@ qla2x00_rst_aen(scsi_qla_host_t *vha) } } -static void -qla2x00_sp_free_dma(srb_t *sp) -{ - struct scsi_cmnd *cmd = sp->cmd; - struct qla_hw_data *ha = sp->fcport->vha->hw; - - if (sp->flags & SRB_DMA_VALID) { - scsi_dma_unmap(cmd); - sp->flags &= ~SRB_DMA_VALID; - } - - if (sp->flags & SRB_CRC_PROT_DMA_VALID) { - dma_unmap_sg(&ha->pdev->dev, scsi_prot_sglist(cmd), - scsi_prot_sg_count(cmd), cmd->sc_data_direction); - sp->flags &= ~SRB_CRC_PROT_DMA_VALID; - } - - if (sp->flags & SRB_CRC_CTX_DSD_VALID) { - /* List assured to be having elements */ - qla2x00_clean_dsd_pool(ha, sp); - sp->flags &= ~SRB_CRC_CTX_DSD_VALID; - } - - if (sp->flags & SRB_CRC_CTX_DMA_VALID) { - dma_pool_free(ha->dl_dma_pool, sp->ctx, - ((struct crc_context *)sp->ctx)->crc_ctx_dma); - sp->flags &= ~SRB_CRC_CTX_DMA_VALID; - } - - if (sp->flags & SRB_FCP_CMND_DMA_VALID) { - struct ct6_dsd *ctx = sp->ctx; - dma_pool_free(ha->fcp_cmnd_dma_pool, ctx->fcp_cmnd, - ctx->fcp_cmnd_dma); - list_splice(&ctx->dsd_list, &ha->gbl_dsd_list); - ha->gbl_dsd_inuse -= ctx->dsd_use_cnt; - ha->gbl_dsd_avail += ctx->dsd_use_cnt; - mempool_free(sp->ctx, ha->ctx_mempool); - sp->ctx = NULL; - } - - CMD_SP(cmd) = NULL; -} - -static void -qla2x00_sp_final_compl(struct qla_hw_data *ha, srb_t *sp) -{ - struct scsi_cmnd *cmd = sp->cmd; - - qla2x00_sp_free_dma(sp); - mempool_free(sp, ha->srb_mempool); - cmd->scsi_done(cmd); -} - -void -qla2x00_sp_compl(struct qla_hw_data *ha, srb_t *sp) -{ - if (atomic_read(&sp->ref_count) == 0) { - ql_dbg(ql_dbg_io, sp->fcport->vha, 0x3015, - "SP reference-count to ZERO -- sp=%p cmd=%p.\n", - sp, sp->cmd); - if (ql2xextended_error_logging & ql_dbg_io) - BUG(); - return; - } - if (!atomic_dec_and_test(&sp->ref_count)) - return; - qla2x00_sp_final_compl(ha, sp); -} - /************************************************************************** * qla2x00_timer * @@ -3959,7 +3919,7 @@ qla2x00_timer(scsi_qla_host_t *vha) sp = req->outstanding_cmds[index]; if (!sp) continue; - if (sp->ctx && !IS_PROT_IO(sp)) + if (sp->type != SRB_SCSI_CMD) continue; sfcp = sp->fcport; if (!(sfcp->flags & FCF_FCP2_DEVICE)) -- cgit v1.2.3-70-g09d2 From 37fed3ee259d59858dd4b733659fbcb2e19389cc Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 9 Feb 2012 11:15:37 -0800 Subject: [SCSI] qla2xxx: Use consistent DL mask for ELS/CT passthru requests. The driver is logging a slew of 'good' status requests for ELS/CT passthrough commands. Change some log messages from: * ql_log() -> ql_dbg() * ql_log_info -> ql_dbg_user Signed-off-by: Andrew Vasquez Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 87f2611c380..d4c0b337a0a 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1072,7 +1072,7 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req, type = "ct pass-through"; break; default: - ql_log(ql_log_warn, vha, 0x503e, + ql_dbg(ql_dbg_user, vha, 0x503e, "Unrecognized SRB: (%p) type=%d.\n", sp, sp->type); return; } @@ -1093,7 +1093,7 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req, bsg_job->reply->reply_payload_rcv_len = le16_to_cpu(((struct els_sts_entry_24xx *)pkt)->total_byte_count); - ql_log(ql_log_info, vha, 0x503f, + ql_dbg(ql_dbg_user, vha, 0x503f, "ELS-CT pass-through-%s error hdl=%x comp_status-status=0x%x " "error subcode 1=0x%x error subcode 2=0x%x total_byte = 0x%x.\n", type, sp->handle, comp_status, fw_status[1], fw_status[2], @@ -1103,7 +1103,7 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req, memcpy( fw_sts_ptr, fw_status, sizeof(fw_status)); } else { - ql_log(ql_log_info, vha, 0x5040, + ql_dbg(ql_dbg_user, vha, 0x5040, "ELS-CT pass-through-%s error hdl=%x comp_status-status=0x%x " "error subcode 1=0x%x error subcode 2=0x%x.\n", type, sp->handle, comp_status, @@ -1116,7 +1116,7 @@ qla24xx_els_ct_entry(scsi_qla_host_t *vha, struct req_que *req, fw_sts_ptr = ((uint8_t*)bsg_job->req->sense) + sizeof(struct fc_bsg_reply); memcpy( fw_sts_ptr, fw_status, sizeof(fw_status)); } - ql_dump_buffer(ql_dbg_async + ql_dbg_buffer, vha, 0x5056, + ql_dump_buffer(ql_dbg_user + ql_dbg_buffer, vha, 0x5056, (uint8_t *)pkt, sizeof(*pkt)); } else { -- cgit v1.2.3-70-g09d2 From 18f509dfa21a69b8de4145edc794172ed55a84a5 Mon Sep 17 00:00:00 2001 From: Joe Carnuccio Date: Thu, 9 Feb 2012 11:15:38 -0800 Subject: [SCSI] qla2xxx: Correct print format for edc ql_log() calls. Signed-off-by: Joe Carnuccio Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 7f895cdcaeb..0635be522cd 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -668,7 +668,7 @@ qla2x00_sysfs_write_edc(struct file *filp, struct kobject *kobj, dev, adr, len, opt); if (rval != QLA_SUCCESS) { ql_log(ql_log_warn, vha, 0x7074, - "Unable to write EDC (%x) %02x:%04x:%02x:%02x:%02hhx\n", + "Unable to write EDC (%x) %02x:%02x:%04x:%02x:%02hhx\n", rval, dev, adr, opt, len, buf[8]); return -EIO; } @@ -725,7 +725,7 @@ qla2x00_sysfs_write_edc_status(struct file *filp, struct kobject *kobj, dev, adr, len, opt); if (rval != QLA_SUCCESS) { ql_log(ql_log_info, vha, 0x7075, - "Unable to write EDC status (%x) %02x:%04x:%02x:%02x.\n", + "Unable to write EDC status (%x) %02x:%02x:%04x:%02x.\n", rval, dev, adr, opt, len); return -EIO; } -- cgit v1.2.3-70-g09d2 From b3b02e6e9512636d5a1839b325e4722e80cda90d Mon Sep 17 00:00:00 2001 From: Arun Easi Date: Thu, 9 Feb 2012 11:15:39 -0800 Subject: [SCSI] qla2xxx: Handle change notifications based on switch scan results. Instead of processing each RSCN individually, use only the name server results from the switch to tell the existance of a given fcport. Signed-off-by: Arun Easi Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 9 +-- drivers/scsi/qla2xxx/qla_init.c | 136 ++++------------------------------------ drivers/scsi/qla2xxx/qla_isr.c | 12 ---- 3 files changed, 13 insertions(+), 144 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 6704ef84c45..7a224b710ad 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -127,7 +127,6 @@ #define WWN_SIZE 8 /* Size of WWPN, WWN & WWNN */ #define MAX_FIBRE_DEVICES 512 #define MAX_FIBRE_LUNS 0xFFFF -#define MAX_RSCN_COUNT 32 #define MAX_HOST_COUNT 16 /* @@ -1720,6 +1719,7 @@ typedef struct fc_port { uint16_t vp_idx; uint8_t fc4_type; + uint8_t scan_state; } fc_port_t; /* @@ -2877,7 +2877,6 @@ typedef struct scsi_qla_host { volatile struct { uint32_t init_done :1; uint32_t online :1; - uint32_t rscn_queue_overflow :1; uint32_t reset_active :1; uint32_t management_server_logged_in :1; @@ -2931,11 +2930,6 @@ typedef struct scsi_qla_host { - /* RSCN queue. */ - uint32_t rscn_queue[MAX_RSCN_COUNT]; - uint8_t rscn_in_ptr; - uint8_t rscn_out_ptr; - /* Timeout timers. */ uint8_t loop_down_abort_time; /* port down timer */ atomic_t loop_down_timer; /* loop down timer */ @@ -3031,7 +3025,6 @@ typedef struct scsi_qla_host { #define QLA_ABORTED 0x105 #define QLA_SUSPENDED 0x106 #define QLA_BUSY 0x107 -#define QLA_RSCNS_HANDLED 0x108 #define QLA_ALREADY_REGISTERED 0x109 #define NVRAM_DELAY() udelay(10) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 4837b5872cd..ff841d7172f 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -29,7 +29,6 @@ static int qla2x00_configure_loop(scsi_qla_host_t *); static int qla2x00_configure_local_loop(scsi_qla_host_t *); static int qla2x00_configure_fabric(scsi_qla_host_t *); static int qla2x00_find_all_fabric_devs(scsi_qla_host_t *, struct list_head *); -static int qla2x00_device_resync(scsi_qla_host_t *); static int qla2x00_fabric_dev_login(scsi_qla_host_t *, fc_port_t *, uint16_t *); @@ -1755,7 +1754,6 @@ qla2x00_init_rings(scsi_qla_host_t *vha) struct qla_hw_data *ha = vha->hw; struct req_que *req; struct rsp_que *rsp; - struct scsi_qla_host *vp; struct mid_init_cb_24xx *mid_init_cb = (struct mid_init_cb_24xx *) ha->init_cb; @@ -1786,11 +1784,6 @@ qla2x00_init_rings(scsi_qla_host_t *vha) } spin_lock(&ha->vport_slock); - /* Clear RSCN queue. */ - list_for_each_entry(vp, &ha->vp_list, list) { - vp->rscn_in_ptr = 0; - vp->rscn_out_ptr = 0; - } spin_unlock(&ha->vport_slock); @@ -2551,13 +2544,11 @@ qla2x00_configure_loop(scsi_qla_host_t *vha) if (ha->current_topology == ISP_CFG_FL && (test_bit(LOCAL_LOOP_UPDATE, &flags))) { - vha->flags.rscn_queue_overflow = 1; set_bit(RSCN_UPDATE, &flags); } else if (ha->current_topology == ISP_CFG_F && (test_bit(LOCAL_LOOP_UPDATE, &flags))) { - vha->flags.rscn_queue_overflow = 1; set_bit(RSCN_UPDATE, &flags); clear_bit(LOCAL_LOOP_UPDATE, &flags); @@ -2567,7 +2558,6 @@ qla2x00_configure_loop(scsi_qla_host_t *vha) } else if (!vha->flags.online || (test_bit(ABORT_ISP_ACTIVE, &flags))) { - vha->flags.rscn_queue_overflow = 1; set_bit(RSCN_UPDATE, &flags); set_bit(LOCAL_LOOP_UPDATE, &flags); } @@ -2617,8 +2607,6 @@ qla2x00_configure_loop(scsi_qla_host_t *vha) set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); if (test_bit(RSCN_UPDATE, &save_flags)) { set_bit(RSCN_UPDATE, &vha->dpc_flags); - if (!IS_ALOGIO_CAPABLE(ha)) - vha->flags.rscn_queue_overflow = 1; } } @@ -2926,7 +2914,7 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport) static int qla2x00_configure_fabric(scsi_qla_host_t *vha) { - int rval, rval2; + int rval; fc_port_t *fcport, *fcptemp; uint16_t next_loopid; uint16_t mb[MAILBOX_REGISTER_COUNT]; @@ -2950,12 +2938,6 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) } vha->device_flags |= SWITCH_FOUND; - /* Mark devices that need re-synchronization. */ - rval2 = qla2x00_device_resync(vha); - if (rval2 == QLA_RSCNS_HANDLED) { - /* No point doing the scan, just continue. */ - return (QLA_SUCCESS); - } do { /* FDMI support. */ if (ql2xfdmienable && @@ -2999,6 +2981,13 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) } } +#define QLA_FCPORT_SCAN 1 +#define QLA_FCPORT_FOUND 2 + + list_for_each_entry(fcport, &vha->vp_fcports, list) { + fcport->scan_state = QLA_FCPORT_SCAN; + } + rval = qla2x00_find_all_fabric_devs(vha, &new_fcports); if (rval != QLA_SUCCESS) break; @@ -3014,7 +3003,8 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) if ((fcport->flags & FCF_FABRIC_DEVICE) == 0) continue; - if (atomic_read(&fcport->state) == FCS_DEVICE_LOST) { + if (fcport->scan_state == QLA_FCPORT_SCAN && + atomic_read(&fcport->state) == FCS_ONLINE) { qla2x00_mark_device_lost(vha, fcport, ql2xplogiabsentdevice, 0); if (fcport->loop_id != FC_NO_LOOP_ID && @@ -3287,6 +3277,8 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, WWN_SIZE)) continue; + fcport->scan_state = QLA_FCPORT_FOUND; + found++; /* Update port state. */ @@ -3442,110 +3434,6 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev) return (rval); } -/* - * qla2x00_device_resync - * Marks devices in the database that needs resynchronization. - * - * Input: - * ha = adapter block pointer. - * - * Context: - * Kernel context. - */ -static int -qla2x00_device_resync(scsi_qla_host_t *vha) -{ - int rval; - uint32_t mask; - fc_port_t *fcport; - uint32_t rscn_entry; - uint8_t rscn_out_iter; - uint8_t format; - port_id_t d_id = {}; - - rval = QLA_RSCNS_HANDLED; - - while (vha->rscn_out_ptr != vha->rscn_in_ptr || - vha->flags.rscn_queue_overflow) { - - rscn_entry = vha->rscn_queue[vha->rscn_out_ptr]; - format = MSB(MSW(rscn_entry)); - d_id.b.domain = LSB(MSW(rscn_entry)); - d_id.b.area = MSB(LSW(rscn_entry)); - d_id.b.al_pa = LSB(LSW(rscn_entry)); - - ql_dbg(ql_dbg_disc, vha, 0x2020, - "RSCN queue entry[%d] = [%02x/%02x%02x%02x].\n", - vha->rscn_out_ptr, format, d_id.b.domain, d_id.b.area, - d_id.b.al_pa); - - vha->rscn_out_ptr++; - if (vha->rscn_out_ptr == MAX_RSCN_COUNT) - vha->rscn_out_ptr = 0; - - /* Skip duplicate entries. */ - for (rscn_out_iter = vha->rscn_out_ptr; - !vha->flags.rscn_queue_overflow && - rscn_out_iter != vha->rscn_in_ptr; - rscn_out_iter = (rscn_out_iter == - (MAX_RSCN_COUNT - 1)) ? 0: rscn_out_iter + 1) { - - if (rscn_entry != vha->rscn_queue[rscn_out_iter]) - break; - - ql_dbg(ql_dbg_disc, vha, 0x2021, - "Skipping duplicate RSCN queue entry found at " - "[%d].\n", rscn_out_iter); - - vha->rscn_out_ptr = rscn_out_iter; - } - - /* Queue overflow, set switch default case. */ - if (vha->flags.rscn_queue_overflow) { - ql_dbg(ql_dbg_disc, vha, 0x2022, - "device_resync: rscn overflow.\n"); - - format = 3; - vha->flags.rscn_queue_overflow = 0; - } - - switch (format) { - case 0: - mask = 0xffffff; - break; - case 1: - mask = 0xffff00; - break; - case 2: - mask = 0xff0000; - break; - default: - mask = 0x0; - d_id.b24 = 0; - vha->rscn_out_ptr = vha->rscn_in_ptr; - break; - } - - rval = QLA_SUCCESS; - - list_for_each_entry(fcport, &vha->vp_fcports, list) { - if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 || - (fcport->d_id.b24 & mask) != d_id.b24 || - fcport->port_type == FCT_BROADCAST) - continue; - - if (atomic_read(&fcport->state) == FCS_ONLINE) { - if (format != 3 || - fcport->port_type != FCT_INITIATOR) { - qla2x00_mark_device_lost(vha, fcport, - 0, 0); - } - } - } - } - return (rval); -} - /* * qla2x00_fabric_dev_login * Login fabric target device and update FC port database. diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index d4c0b337a0a..39a0584889f 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -328,7 +328,6 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb) struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24; struct device_reg_82xx __iomem *reg82 = &ha->iobase->isp82; uint32_t rscn_entry, host_pid; - uint8_t rscn_queue_index; unsigned long flags; /* Setup to process RIO completion. */ @@ -685,8 +684,6 @@ skip_rio: qla2x00_mark_all_devices_lost(vha, 1); - vha->flags.rscn_queue_overflow = 1; - set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags); break; @@ -715,15 +712,6 @@ skip_rio: /* Ignore reserved bits from RSCN-payload. */ rscn_entry = ((mb[1] & 0x3ff) << 16) | mb[2]; - rscn_queue_index = vha->rscn_in_ptr + 1; - if (rscn_queue_index == MAX_RSCN_COUNT) - rscn_queue_index = 0; - if (rscn_queue_index != vha->rscn_out_ptr) { - vha->rscn_queue[vha->rscn_in_ptr] = rscn_entry; - vha->rscn_in_ptr = rscn_queue_index; - } else { - vha->flags.rscn_queue_overflow = 1; - } atomic_set(&vha->loop_down_timer, 0); vha->flags.management_server_logged_in = 0; -- cgit v1.2.3-70-g09d2 From aa61556fa3cf7d0e39a67dc5b043b96519ce3726 Mon Sep 17 00:00:00 2001 From: Joe Carnuccio Date: Thu, 9 Feb 2012 11:15:40 -0800 Subject: [SCSI] qla2xxx: Return blank sysfs string on initial get thermal failure. When thermal temperature initially fails, return a blank string to the sysfs interface. This fixes the initial display of 0.00 followed by subsequent display of blank line; the initial 0.00 should have not displayed for cards that do not support thermal temperature. Signed-off-by: Joe Carnuccio Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 0635be522cd..5433f95f3ed 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1365,7 +1365,7 @@ qla2x00_thermal_temp_show(struct device *dev, else if (!vha->hw->flags.eeh_busy) rval = qla2x00_get_thermal_temp(vha, &temp, &frac); if (rval != QLA_SUCCESS) - temp = frac = 0; + return snprintf(buf, PAGE_SIZE, "\n"); return snprintf(buf, PAGE_SIZE, "%d.%02d\n", temp, frac); } -- cgit v1.2.3-70-g09d2 From 2b29d96d7122befe50727c7f5090e783ed910826 Mon Sep 17 00:00:00 2001 From: Chad Dupuis Date: Thu, 9 Feb 2012 11:15:41 -0800 Subject: [SCSI] qla2xxx: Increase speed of flash access in ISP82xx adapters to improve firmware load speed. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_nx.c | 67 +++++++++++++++++-------------------------- 1 file changed, 27 insertions(+), 40 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 0a2f2d57880..b0df7da0201 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -908,27 +908,37 @@ qla82xx_wait_rom_done(struct qla_hw_data *ha) return 0; } +int +qla82xx_md_rw_32(struct qla_hw_data *ha, uint32_t off, u32 data, uint8_t flag) +{ + uint32_t off_value, rval = 0; + + WRT_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase), + (off & 0xFFFF0000)); + + /* Read back value to make sure write has gone through */ + RD_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase)); + off_value = (off & 0x0000FFFF); + + if (flag) + WRT_REG_DWORD((void *) + (off_value + CRB_INDIRECT_2M + ha->nx_pcibase), + data); + else + rval = RD_REG_DWORD((void *) + (off_value + CRB_INDIRECT_2M + ha->nx_pcibase)); + + return rval; +} + static int qla82xx_do_rom_fast_read(struct qla_hw_data *ha, int addr, int *valp) { - scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); + /* Dword reads to flash. */ + qla82xx_md_rw_32(ha, MD_DIRECT_ROM_WINDOW, (addr & 0xFFFF0000), 1); + *valp = qla82xx_md_rw_32(ha, MD_DIRECT_ROM_READ_BASE + + (addr & 0x0000FFFF), 0, 0); - qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ADDRESS, addr); - qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); - qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 3); - qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, 0xb); - qla82xx_wait_rom_busy(ha); - if (qla82xx_wait_rom_done(ha)) { - ql_log(ql_log_fatal, vha, 0x00ba, - "Error waiting for rom done.\n"); - return -1; - } - /* Reset abyte_cnt and dummy_byte_cnt */ - qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); - udelay(10); - cond_resched(); - qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 0); - *valp = qla82xx_rd_32(ha, QLA82XX_ROMUSB_ROM_RDATA); return 0; } @@ -3639,29 +3649,6 @@ qla82xx_chip_reset_cleanup(scsi_qla_host_t *vha) } /* Minidump related functions */ -int -qla82xx_md_rw_32(struct qla_hw_data *ha, uint32_t off, u32 data, uint8_t flag) -{ - uint32_t off_value, rval = 0; - - WRT_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase), - (off & 0xFFFF0000)); - - /* Read back value to make sure write has gone through */ - RD_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase)); - off_value = (off & 0x0000FFFF); - - if (flag) - WRT_REG_DWORD((void *) - (off_value + CRB_INDIRECT_2M + ha->nx_pcibase), - data); - else - rval = RD_REG_DWORD((void *) - (off_value + CRB_INDIRECT_2M + ha->nx_pcibase)); - - return rval; -} - static int qla82xx_minidump_process_control(scsi_qla_host_t *vha, qla82xx_md_entry_hdr_t *entry_hdr, uint32_t **d_ptr) -- cgit v1.2.3-70-g09d2 From 0b91d1169e5382040d80622fe79e40c60ff88555 Mon Sep 17 00:00:00 2001 From: Chad Dupuis Date: Thu, 9 Feb 2012 11:15:42 -0800 Subject: [SCSI] qla2xxx: Handle failure cases during fabric_login Make sure that all calls to ha->isp_ops->fabric_login() check the return value for failure. Signed-off-by: Andrew Vasquez Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_dbg.c | 4 ++-- drivers/scsi/qla2xxx/qla_gs.c | 22 ++++++++++++++-------- drivers/scsi/qla2xxx/qla_init.c | 35 ++++++++++++++++++++++++++--------- 3 files changed, 42 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index cd278a09bea..b85ba1ea010 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -11,9 +11,9 @@ * ---------------------------------------------------------------------- * | Level | Last Value Used | Holes | * ---------------------------------------------------------------------- - * | Module Init and Probe | 0x011f | 0x4b,0xfa | + * | Module Init and Probe | 0x0120 | 0x4b,0xba,0xfa | * | Mailbox commands | 0x1139 | 0x112c-0x112e | - * | Device Discovery | 0x2084 | | + * | Device Discovery | 0x2085 | 0x2020-0x2022 | * | Queue Command and IO tracing | 0x302f | 0x3006,0x3008 | * | | | 0x302d-0x302e | * | DPC Thread | 0x401c | | diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index dd8339928a5..69243036529 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -1107,20 +1107,26 @@ qla2x00_sns_rnn_id(scsi_qla_host_t *vha) static int qla2x00_mgmt_svr_login(scsi_qla_host_t *vha) { - int ret; + int ret, rval; uint16_t mb[MAILBOX_REGISTER_COUNT]; struct qla_hw_data *ha = vha->hw; ret = QLA_SUCCESS; if (vha->flags.management_server_logged_in) return ret; - ha->isp_ops->fabric_login(vha, vha->mgmt_svr_loop_id, 0xff, 0xff, 0xfa, - mb, BIT_1|BIT_0); - if (mb[0] != MBS_COMMAND_COMPLETE) { - ql_dbg(ql_dbg_disc, vha, 0x2024, - "Failed management_server login: loopid=%x mb[0]=%x " - "mb[1]=%x mb[2]=%x mb[6]=%x mb[7]=%x.\n", - vha->mgmt_svr_loop_id, mb[0], mb[1], mb[2], mb[6], mb[7]); + rval = ha->isp_ops->fabric_login(vha, vha->mgmt_svr_loop_id, 0xff, 0xff, + 0xfa, mb, BIT_1|BIT_0); + if (rval != QLA_SUCCESS || mb[0] != MBS_COMMAND_COMPLETE) { + if (rval == QLA_MEMORY_ALLOC_FAILED) + ql_dbg(ql_dbg_disc, vha, 0x2085, + "Failed management_server login: loopid=%x " + "rval=%d\n", vha->mgmt_svr_loop_id, rval); + else + ql_dbg(ql_dbg_disc, vha, 0x2024, + "Failed management_server login: loopid=%x " + "mb[0]=%x mb[1]=%x mb[2]=%x mb[6]=%x mb[7]=%x.\n", + vha->mgmt_svr_loop_id, mb[0], mb[1], mb[2], mb[6], + mb[7]); ret = QLA_FUNCTION_FAILED; } else vha->flags.management_server_logged_in = 1; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index ff841d7172f..abd095c400d 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -2949,8 +2949,12 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha) loop_id = NPH_SNS; else loop_id = SIMPLE_NAME_SERVER; - ha->isp_ops->fabric_login(vha, loop_id, 0xff, 0xff, - 0xfc, mb, BIT_1 | BIT_0); + rval = ha->isp_ops->fabric_login(vha, loop_id, 0xff, 0xff, + 0xfc, mb, BIT_1|BIT_0); + if (rval != QLA_SUCCESS) { + set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); + return rval; + } if (mb[0] != MBS_COMMAND_COMPLETE) { ql_dbg(ql_dbg_disc, vha, 0x2042, "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x " @@ -3487,6 +3491,9 @@ qla2x00_fabric_dev_login(scsi_qla_host_t *vha, fc_port_t *fcport, } else { qla2x00_update_fcport(vha, fcport); } + } else { + /* Retry Login. */ + qla2x00_mark_device_lost(vha, fcport, 1, 0); } return (rval); @@ -3527,9 +3534,12 @@ qla2x00_fabric_login(scsi_qla_host_t *vha, fc_port_t *fcport, fcport->d_id.b.area, fcport->d_id.b.al_pa); /* Login fcport on switch. */ - ha->isp_ops->fabric_login(vha, fcport->loop_id, + rval = ha->isp_ops->fabric_login(vha, fcport->loop_id, fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa, mb, BIT_0); + if (rval != QLA_SUCCESS) { + return rval; + } if (mb[0] == MBS_PORT_ID_USED) { /* * Device has another loop ID. The firmware team @@ -4844,6 +4854,7 @@ int qla24xx_configure_vhba(scsi_qla_host_t *vha) { int rval = QLA_SUCCESS; + int rval2; uint16_t mb[MAILBOX_REGISTER_COUNT]; struct qla_hw_data *ha = vha->hw; struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev); @@ -4868,12 +4879,18 @@ qla24xx_configure_vhba(scsi_qla_host_t *vha) vha->flags.management_server_logged_in = 0; /* Login to SNS first */ - ha->isp_ops->fabric_login(vha, NPH_SNS, 0xff, 0xff, 0xfc, mb, BIT_1); - if (mb[0] != MBS_COMMAND_COMPLETE) { - ql_dbg(ql_dbg_init, vha, 0x0103, - "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x " - "mb[6]=%x mb[7]=%x.\n", - NPH_SNS, mb[0], mb[1], mb[2], mb[6], mb[7]); + rval2 = ha->isp_ops->fabric_login(vha, NPH_SNS, 0xff, 0xff, 0xfc, mb, + BIT_1); + if (rval2 != QLA_SUCCESS || mb[0] != MBS_COMMAND_COMPLETE) { + if (rval2 == QLA_MEMORY_ALLOC_FAILED) + ql_dbg(ql_dbg_init, vha, 0x0120, + "Failed SNS login: loop_id=%x, rval2=%d\n", + NPH_SNS, rval2); + else + ql_dbg(ql_dbg_init, vha, 0x0103, + "Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x " + "mb[2]=%x mb[6]=%x mb[7]=%x.\n", + NPH_SNS, mb[0], mb[1], mb[2], mb[6], mb[7]); return (QLA_FUNCTION_FAILED); } -- cgit v1.2.3-70-g09d2 From af11f64dfd634e8116b7c4e2422e0e0c698b91c1 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 9 Feb 2012 11:15:43 -0800 Subject: [SCSI] qla2xxx: Perform implicit logout during rport tear-down. During rport tear-down, make sure we do an implicit LOGO of the fcport in our firmware to try to clear any residual commands associated with that fcport. Signed-off-by: Andrew Vasquez Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 12 ++++++++---- drivers/scsi/qla2xxx/qla_dbg.c | 3 ++- drivers/scsi/qla2xxx/qla_def.h | 1 + drivers/scsi/qla2xxx/qla_gbl.h | 3 +++ drivers/scsi/qla2xxx/qla_mbx.c | 37 +++++++++++++++++++++++++++++++++++++ 5 files changed, 51 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 5433f95f3ed..e21db2f7822 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1647,10 +1647,14 @@ qla2x00_terminate_rport_io(struct fc_rport *rport) * final cleanup of firmware resources (PCBs and XCBs). */ if (fcport->loop_id != FC_NO_LOOP_ID && - !test_bit(UNLOADING, &fcport->vha->dpc_flags)) - fcport->vha->hw->isp_ops->fabric_logout(fcport->vha, - fcport->loop_id, fcport->d_id.b.domain, - fcport->d_id.b.area, fcport->d_id.b.al_pa); + !test_bit(UNLOADING, &fcport->vha->dpc_flags)) { + if (IS_FWI2_CAPABLE(fcport->vha->hw)) + fcport->vha->hw->isp_ops->fabric_logout(fcport->vha, + fcport->loop_id, fcport->d_id.b.domain, + fcport->d_id.b.area, fcport->d_id.b.al_pa); + else + qla2x00_port_logout(fcport->vha, fcport); + } } static int diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index b85ba1ea010..4ba30b25f86 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -12,7 +12,8 @@ * | Level | Last Value Used | Holes | * ---------------------------------------------------------------------- * | Module Init and Probe | 0x0120 | 0x4b,0xba,0xfa | - * | Mailbox commands | 0x1139 | 0x112c-0x112e | + * | Mailbox commands | 0x113e | 0x112c-0x112e | + * | | | 0x113a | * | Device Discovery | 0x2085 | 0x2020-0x2022 | * | Queue Command and IO tracing | 0x302f | 0x3006,0x3008 | * | | | 0x302d-0x302e | diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 7a224b710ad..1281f5be676 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -665,6 +665,7 @@ typedef struct { #define MBC_CONFIGURE_VF 0x4b /* Configure VFs */ #define MBC_RESET_LINK_STATUS 0x52 /* Reset Link Error Status */ #define MBC_IOCB_COMMAND_A64 0x54 /* Execute IOCB command (64) */ +#define MBC_PORT_LOGOUT 0x56 /* Port Logout request */ #define MBC_SEND_RNID_ELS 0x57 /* Send RNID ELS request */ #define MBC_SET_RNID_PARAMS 0x59 /* Set RNID parameters */ #define MBC_GET_RNID_PARAMS 0x5a /* Data Rate */ diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index 87fee23fd16..9f065804bd1 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -367,6 +367,9 @@ qla81xx_get_port_config(scsi_qla_host_t *, uint16_t *); extern int qla81xx_set_port_config(scsi_qla_host_t *, uint16_t *); +extern int +qla2x00_port_logout(scsi_qla_host_t *, struct fc_port *); + /* * Global Function Prototypes in qla_isr.c source file. */ diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 50ec272b61d..61e2fb75fbf 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -4502,5 +4502,42 @@ qla83xx_write_remote_reg(scsi_qla_host_t *vha, uint32_t reg, uint32_t data) ql_dbg(ql_dbg_mbx, vha, 0x1132, "Done %s.\n", __func__); } + return rval; } + +int +qla2x00_port_logout(scsi_qla_host_t *vha, struct fc_port *fcport) +{ + int rval; + struct qla_hw_data *ha = vha->hw; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + if (IS_QLA2100(ha) || IS_QLA2200(ha)) { + ql_dbg(ql_dbg_mbx, vha, 0x113b, + "Implicit LOGO Unsupported.\n"); + return QLA_FUNCTION_FAILED; + } + + + ql_dbg(ql_dbg_mbx, vha, 0x113c, "Done %s.\n", __func__); + + /* Perform Implicit LOGO. */ + mcp->mb[0] = MBC_PORT_LOGOUT; + mcp->mb[1] = fcport->loop_id; + mcp->mb[10] = BIT_15; + mcp->out_mb = MBX_10|MBX_1|MBX_0; + mcp->in_mb = MBX_0; + mcp->tov = MBX_TOV_SECONDS; + mcp->flags = 0; + rval = qla2x00_mailbox_command(vha, mcp); + if (rval != QLA_SUCCESS) + ql_dbg(ql_dbg_mbx, vha, 0x113d, + "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]); + else + ql_dbg(ql_dbg_mbx, vha, 0x113e, "Done %s.\n", __func__); + + return rval; +} + -- cgit v1.2.3-70-g09d2 From b7bfbe12dc7223096005338a3099b2eec685bc30 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 9 Feb 2012 11:15:44 -0800 Subject: [SCSI] qla2xxx: Prep zero-length BSG data-transfer requests. During command failure/non-recognition, the upper-layer FC-transport expects the drivers to set job-reply->reply_payload_rcv_len. Do this in a consistent manner to avoid duplication. Signed-off-by: Andrew Vasquez Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_bsg.c | 24 +++++++----------------- 1 file changed, 7 insertions(+), 17 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index b2b664483ab..020714329ee 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -108,8 +108,6 @@ qla24xx_proc_fcp_prio_cfg_cmd(struct fc_bsg_job *bsg_job) uint32_t len; uint32_t oper; - bsg_job->reply->reply_payload_rcv_len = 0; - if (!(IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha) || IS_QLA82XX(ha))) { ret = -EINVAL; goto exit_fcp_prio_cfg; @@ -729,7 +727,6 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) if (qla81xx_get_port_config(vha, config)) { ql_log(ql_log_warn, vha, 0x701f, "Get port config failed.\n"); - bsg_job->reply->reply_payload_rcv_len = 0; bsg_job->reply->result = (DID_ERROR << 16); rval = -EPERM; goto done_free_dma_req; @@ -743,8 +740,6 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) new_config)) { ql_log(ql_log_warn, vha, 0x7024, "Internal loopback failed.\n"); - bsg_job->reply->reply_payload_rcv_len = - 0; bsg_job->reply->result = (DID_ERROR << 16); rval = -EPERM; @@ -756,8 +751,6 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) */ if (qla81xx_reset_internal_loopback(vha, config, 1)) { - bsg_job->reply->reply_payload_rcv_len = - 0; bsg_job->reply->result = (DID_ERROR << 16); rval = -EPERM; @@ -794,7 +787,6 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) "MPI reset failed.\n"); } - bsg_job->reply->reply_payload_rcv_len = 0; bsg_job->reply->result = (DID_ERROR << 16); rval = -EIO; goto done_free_dma_req; @@ -819,7 +811,6 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job) fw_sts_ptr += sizeof(response); *fw_sts_ptr = command_sent; rval = 0; - bsg_job->reply->reply_payload_rcv_len = 0; bsg_job->reply->result = (DID_ERROR << 16); } else { ql_dbg(ql_dbg_user, vha, 0x702d, @@ -878,7 +869,7 @@ qla84xx_reset(struct fc_bsg_job *bsg_job) if (rval) { ql_log(ql_log_warn, vha, 0x7030, "Vendor request 84xx reset failed.\n"); - rval = bsg_job->reply->reply_payload_rcv_len = 0; + rval = 0; bsg_job->reply->result = (DID_ERROR << 16); } else { @@ -977,9 +968,8 @@ qla84xx_updatefw(struct fc_bsg_job *bsg_job) ql_log(ql_log_warn, vha, 0x7037, "Vendor request 84xx updatefw failed.\n"); - rval = bsg_job->reply->reply_payload_rcv_len = 0; + rval = 0; bsg_job->reply->result = (DID_ERROR << 16); - } else { ql_dbg(ql_dbg_user, vha, 0x7038, "Vendor request 84xx updatefw completed.\n"); @@ -1165,7 +1155,7 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_job) ql_log(ql_log_warn, vha, 0x7043, "Vendor request 84xx mgmt failed.\n"); - rval = bsg_job->reply->reply_payload_rcv_len = 0; + rval = 0; bsg_job->reply->result = (DID_ERROR << 16); } else { @@ -1216,8 +1206,6 @@ qla24xx_iidma(struct fc_bsg_job *bsg_job) uint16_t mb[MAILBOX_REGISTER_COUNT]; uint8_t *rsp_ptr = NULL; - bsg_job->reply->reply_payload_rcv_len = 0; - if (!IS_IIDMA_CAPABLE(vha->hw)) { ql_log(ql_log_info, vha, 0x7046, "iiDMA not supported.\n"); return -EINVAL; @@ -1310,8 +1298,6 @@ qla2x00_optrom_setup(struct fc_bsg_job *bsg_job, scsi_qla_host_t *vha, int valid = 0; struct qla_hw_data *ha = vha->hw; - bsg_job->reply->reply_payload_rcv_len = 0; - if (unlikely(pci_channel_offline(ha->pdev))) return -EINVAL; @@ -1623,6 +1609,9 @@ qla24xx_bsg_request(struct fc_bsg_job *bsg_job) struct Scsi_Host *host; scsi_qla_host_t *vha; + /* In case no data transferred. */ + bsg_job->reply->reply_payload_rcv_len = 0; + if (bsg_job->request->msgcode == FC_BSG_RPT_ELS) { rport = bsg_job->rport; fcport = *(fc_port_t **) rport->dd_data; @@ -1661,6 +1650,7 @@ qla24xx_bsg_request(struct fc_bsg_job *bsg_job) case FC_BSG_RPT_CT: default: ql_log(ql_log_warn, vha, 0x705a, "Unsupported BSG request.\n"); + bsg_job->reply->result = ret; break; } return ret; -- cgit v1.2.3-70-g09d2 From 7f45dd0b3d39aee114b969a2bf84ac883b2cd196 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 9 Feb 2012 11:15:45 -0800 Subject: [SCSI] qla2xxx: Reduce mbx-command timeout for Login/Logout requests. Don't use default 30 second mailbox-command timeout for these serial requests, instead, limit the TMO to the standard 2*RATOV plus some fudge-factor. Signed-off-by: Andrew Vasquez Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_mbx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 61e2fb75fbf..5470177a1ee 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -1643,7 +1643,8 @@ qla24xx_login_fabric(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain, lg->port_id[1] = area; lg->port_id[2] = domain; lg->vp_index = vha->vp_idx; - rval = qla2x00_issue_iocb(vha, lg, lg_dma, 0); + rval = qla2x00_issue_iocb_timeout(vha, lg, lg_dma, 0, + (ha->r_a_tov / 10 * 2) + 2); if (rval != QLA_SUCCESS) { ql_dbg(ql_dbg_mbx, vha, 0x1063, "Failed to issue login IOCB (%x).\n", rval); @@ -1906,8 +1907,8 @@ qla24xx_fabric_logout(scsi_qla_host_t *vha, uint16_t loop_id, uint8_t domain, lg->port_id[1] = area; lg->port_id[2] = domain; lg->vp_index = vha->vp_idx; - - rval = qla2x00_issue_iocb(vha, lg, lg_dma, 0); + rval = qla2x00_issue_iocb_timeout(vha, lg, lg_dma, 0, + (ha->r_a_tov / 10 * 2) + 2); if (rval != QLA_SUCCESS) { ql_dbg(ql_dbg_mbx, vha, 0x106f, "Failed to issue logout IOCB (%x).\n", rval); -- cgit v1.2.3-70-g09d2 From d8c0d546059ca05ab3c2bb287765ecd968a96b57 Mon Sep 17 00:00:00 2001 From: Chad Dupuis Date: Thu, 9 Feb 2012 11:15:46 -0800 Subject: [SCSI] qla2xxx: Print mailbox command opcode and return code when a command times out. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_mbx.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 5470177a1ee..bde3eb273b0 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -90,7 +90,8 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, mcp->tov * HZ)) { /* Timeout occurred. Return error. */ ql_log(ql_log_warn, base_vha, 0x1005, - "Cmd access timeout, Exiting.\n"); + "Cmd access timeout, cmd=0x%x, Exiting.\n", + mcp->mb[0]); return QLA_FUNCTION_TIMEOUT; } @@ -313,9 +314,10 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) CRB_NIU_XG_PAUSE_CTL_P1); } ql_log(ql_log_info, base_vha, 0x101c, - "Mailbox cmd timeout occured. " - "Scheduling ISP abort eeh_busy=0x%x.\n", - ha->flags.eeh_busy); + "Mailbox cmd timeout occured, cmd=0x%x, " + "mb[0]=0x%x, eeh_busy=0x%x. Scheduling ISP " + "abort.\n", command, mcp->mb[0], + ha->flags.eeh_busy); set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); qla2xxx_wake_dpc(vha); } @@ -337,9 +339,9 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) CRB_NIU_XG_PAUSE_CTL_P1); } ql_log(ql_log_info, base_vha, 0x101e, - "Mailbox cmd timeout occured. " - "Scheduling ISP abort.\n"); - + "Mailbox cmd timeout occured, cmd=0x%x, " + "mb[0]=0x%x. Scheduling ISP abort ", + command, mcp->mb[0]); set_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags); clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); /* Allow next mbx cmd to come in. */ -- cgit v1.2.3-70-g09d2 From 3256b435819195ce06696e206b792ad41083528a Mon Sep 17 00:00:00 2001 From: Chad Dupuis Date: Thu, 9 Feb 2012 11:15:47 -0800 Subject: [SCSI] qla2xxx: Convert remaining printk's to ql_log format. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_dbg.c | 4 ++-- drivers/scsi/qla2xxx/qla_isr.c | 24 ++++++++++++------------ drivers/scsi/qla2xxx/qla_nx.c | 4 ++-- 3 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 4ba30b25f86..472ee5e96e6 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -18,7 +18,7 @@ * | Queue Command and IO tracing | 0x302f | 0x3006,0x3008 | * | | | 0x302d-0x302e | * | DPC Thread | 0x401c | | - * | Async Events | 0x5057 | 0x502b-0x502f | + * | Async Events | 0x505d | 0x502b-0x502f | * | | | 0x5047,0x5052 | * | Timer Routines | 0x6011 | 0x600e-0x600f | * | User Space Interactions | 0x709e | 0x7018,0x702e | @@ -27,7 +27,7 @@ * | | | 0x800b,0x8039 | * | AER/EEH | 0x900f | | * | Virtual Port | 0xa007 | | - * | ISP82XX Specific | 0xb052 | | + * | ISP82XX Specific | 0xb054 | 0xb053 | * | MultiQ | 0xc00c | | * | Misc | 0xd010 | | * ---------------------------------------------------------------------- diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 39a0584889f..f78f10f164e 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -44,8 +44,8 @@ qla2100_intr_handler(int irq, void *dev_id) rsp = (struct rsp_que *) dev_id; if (!rsp) { - printk(KERN_INFO - "%s(): NULL response queue pointer.\n", __func__); + ql_log(ql_log_info, NULL, 0x505d, + "%s: NULL response queue pointer.\n", __func__); return (IRQ_NONE); } @@ -141,8 +141,8 @@ qla2300_intr_handler(int irq, void *dev_id) rsp = (struct rsp_que *) dev_id; if (!rsp) { - printk(KERN_INFO - "%s(): NULL response queue pointer.\n", __func__); + ql_log(ql_log_info, NULL, 0x5058, + "%s: NULL response queue pointer.\n", __func__); return (IRQ_NONE); } @@ -2097,8 +2097,8 @@ qla24xx_intr_handler(int irq, void *dev_id) rsp = (struct rsp_que *) dev_id; if (!rsp) { - printk(KERN_INFO - "%s(): NULL response queue pointer.\n", __func__); + ql_log(ql_log_info, NULL, 0x5059, + "%s: NULL response queue pointer.\n", __func__); return IRQ_NONE; } @@ -2181,8 +2181,8 @@ qla24xx_msix_rsp_q(int irq, void *dev_id) rsp = (struct rsp_que *) dev_id; if (!rsp) { - printk(KERN_INFO - "%s(): NULL response queue pointer.\n", __func__); + ql_log(ql_log_info, NULL, 0x505a, + "%s: NULL response queue pointer.\n", __func__); return IRQ_NONE; } ha = rsp->hw; @@ -2211,8 +2211,8 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) rsp = (struct rsp_que *) dev_id; if (!rsp) { - printk(KERN_INFO - "%s(): NULL response queue pointer.\n", __func__); + ql_log(ql_log_info, NULL, 0x505b, + "%s: NULL response queue pointer.\n", __func__); return IRQ_NONE; } ha = rsp->hw; @@ -2245,8 +2245,8 @@ qla24xx_msix_default(int irq, void *dev_id) rsp = (struct rsp_que *) dev_id; if (!rsp) { - printk(KERN_INFO - "%s(): NULL response queue pointer.\n", __func__); + ql_log(ql_log_info, NULL, 0x505c, + "%s: NULL response queue pointer.\n", __func__); return IRQ_NONE; } ha = rsp->hw; diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index b0df7da0201..b251b4d8a2e 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -2050,8 +2050,8 @@ qla82xx_intr_handler(int irq, void *dev_id) rsp = (struct rsp_que *) dev_id; if (!rsp) { - printk(KERN_INFO - "%s(): NULL response queue pointer.\n", __func__); + ql_log(ql_log_info, NULL, 0xb054, + "%s: NULL response queue pointer.\n", __func__); return IRQ_NONE; } ha = rsp->hw; -- cgit v1.2.3-70-g09d2 From 70a3fc7671a70d3ba3e606a38bd70834f08d10f3 Mon Sep 17 00:00:00 2001 From: Chad Dupuis Date: Thu, 9 Feb 2012 11:15:48 -0800 Subject: [SCSI] qla2xxx: Use ql_log* #define's in ql_log() and ql_log_pci(). Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_dbg.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 472ee5e96e6..e9153104afe 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -2364,13 +2364,13 @@ ql_log(uint32_t level, scsi_qla_host_t *vha, int32_t id, const char *fmt, ...) vaf.va = &va; switch (level) { - case 0: /* FATAL LOG */ + case ql_log_fatal: /* FATAL LOG */ pr_crit("%s%pV", pbuf, &vaf); break; - case 1: + case ql_log_warn: pr_err("%s%pV", pbuf, &vaf); break; - case 2: + case ql_log_info: pr_warn("%s%pV", pbuf, &vaf); break; default: @@ -2419,13 +2419,13 @@ ql_log_pci(uint32_t level, struct pci_dev *pdev, int32_t id, vaf.va = &va; switch (level) { - case 0: /* FATAL LOG */ + case ql_log_fatal: /* FATAL LOG */ pr_crit("%s%pV", pbuf, &vaf); break; - case 1: + case ql_log_warn: pr_err("%s%pV", pbuf, &vaf); break; - case 2: + case ql_log_info: pr_warn("%s%pV", pbuf, &vaf); break; default: -- cgit v1.2.3-70-g09d2 From 880fdedb3e7ae55a99b3b87a27c945ac948243f9 Mon Sep 17 00:00:00 2001 From: Arun Easi Date: Thu, 9 Feb 2012 11:15:49 -0800 Subject: [SCSI] qla2xxx: Fix ql_dbg arguments. Signed-off-by: Arun Easi Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_nx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index b251b4d8a2e..751846f5c96 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -4142,7 +4142,7 @@ qla82xx_md_collect(scsi_qla_host_t *vha) total_data_size = ha->md_dump_size; - ql_dbg(ql_log_info, vha, 0xb03d, + ql_dbg(ql_dbg_p3p, vha, 0xb03d, "Total minidump data_size 0x%x to be captured\n", total_data_size); /* Check whether template obtained is valid */ @@ -4265,7 +4265,7 @@ skip_nxt_entry: } if (data_collected != total_data_size) { - ql_dbg(ql_log_warn, vha, 0xb043, + ql_dbg(ql_dbg_p3p, vha, 0xb043, "MiniDump data mismatch: Data collected: [0x%x]," "total_data_size:[0x%x]\n", data_collected, total_data_size); -- cgit v1.2.3-70-g09d2 From 557cf7857cbf396f899034f1a7a13e245ef7e914 Mon Sep 17 00:00:00 2001 From: Arun Easi Date: Thu, 9 Feb 2012 11:15:50 -0800 Subject: [SCSI] qla2xxx: Add new message when a new loopid is assigned. Signed-off-by: Arun Easi Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_dbg.c | 2 +- drivers/scsi/qla2xxx/qla_init.c | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index e9153104afe..c28309bc3da 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -14,7 +14,7 @@ * | Module Init and Probe | 0x0120 | 0x4b,0xba,0xfa | * | Mailbox commands | 0x113e | 0x112c-0x112e | * | | | 0x113a | - * | Device Discovery | 0x2085 | 0x2020-0x2022 | + * | Device Discovery | 0x2086 | 0x2020-0x2022 | * | Queue Command and IO tracing | 0x302f | 0x3006,0x3008 | * | | | 0x302d-0x302e | * | DPC Thread | 0x401c | | diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index abd095c400d..b28eb40d8ad 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3421,6 +3421,9 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev) /* If not in use then it is free to use. */ if (!found) { + ql_dbg(ql_dbg_disc, dev->vha, 0x2086, + "Assigning new loopid=%x, portid=%x.\n", + dev->loop_id, dev->d_id.b24); break; } -- cgit v1.2.3-70-g09d2 From 5e19ed90f95f9e3799f2c6a06f87cb043c212102 Mon Sep 17 00:00:00 2001 From: Arun Easi Date: Thu, 9 Feb 2012 11:15:51 -0800 Subject: [SCSI] qla2xxx: Log messages to use correct vha. Signed-off-by: Arun Easi Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 34 ++++++++++++------------ drivers/scsi/qla2xxx/qla_mbx.c | 60 +++++++++++++++++++++--------------------- 2 files changed, 47 insertions(+), 47 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index f78f10f164e..fdead64eb7d 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1141,7 +1141,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, data[1] = lio->u.logio.flags & SRB_LOGIN_RETRIED ? QLA_LOGIO_LOGIN_RETRIED : 0; if (logio->entry_status) { - ql_log(ql_log_warn, vha, 0x5034, + ql_log(ql_log_warn, fcport->vha, 0x5034, "Async-%s error entry - hdl=%x" "portid=%02x%02x%02x entry-status=%x.\n", type, sp->handle, fcport->d_id.b.domain, @@ -1154,7 +1154,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, } if (le16_to_cpu(logio->comp_status) == CS_COMPLETE) { - ql_dbg(ql_dbg_async, vha, 0x5036, + ql_dbg(ql_dbg_async, fcport->vha, 0x5036, "Async-%s complete - hdl=%x portid=%02x%02x%02x " "iop0=%x.\n", type, sp->handle, fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa, @@ -1195,7 +1195,7 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req, break; } - ql_dbg(ql_dbg_async, vha, 0x5037, + ql_dbg(ql_dbg_async, fcport->vha, 0x5037, "Async-%s failed - hdl=%x portid=%02x%02x%02x comp=%x " "iop0=%x iop1=%x.\n", type, sp->handle, fcport->d_id.b.domain, fcport->d_id.b.area, fcport->d_id.b.al_pa, @@ -1228,24 +1228,24 @@ qla24xx_tm_iocb_entry(scsi_qla_host_t *vha, struct req_que *req, fcport = sp->fcport; if (sts->entry_status) { - ql_log(ql_log_warn, vha, 0x5038, + ql_log(ql_log_warn, fcport->vha, 0x5038, "Async-%s error - hdl=%x entry-status(%x).\n", type, sp->handle, sts->entry_status); } else if (sts->comp_status != __constant_cpu_to_le16(CS_COMPLETE)) { - ql_log(ql_log_warn, vha, 0x5039, + ql_log(ql_log_warn, fcport->vha, 0x5039, "Async-%s error - hdl=%x completion status(%x).\n", type, sp->handle, sts->comp_status); } else if (!(le16_to_cpu(sts->scsi_status) & SS_RESPONSE_INFO_LEN_VALID)) { - ql_log(ql_log_warn, vha, 0x503a, + ql_log(ql_log_warn, fcport->vha, 0x503a, "Async-%s error - hdl=%x no response info(%x).\n", type, sp->handle, sts->scsi_status); } else if (le32_to_cpu(sts->rsp_data_len) < 4) { - ql_log(ql_log_warn, vha, 0x503b, + ql_log(ql_log_warn, fcport->vha, 0x503b, "Async-%s error - hdl=%x not enough response(%d).\n", type, sp->handle, sts->rsp_data_len); } else if (sts->data[3]) { - ql_log(ql_log_warn, vha, 0x503c, + ql_log(ql_log_warn, fcport->vha, 0x503c, "Async-%s error - hdl=%x response(%x).\n", type, sp->handle, sts->data[3]); } else { @@ -1630,7 +1630,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) par_sense_len -= rsp_info_len; } if (rsp_info_len > 3 && rsp_info[3]) { - ql_dbg(ql_dbg_io, vha, 0x3019, + ql_dbg(ql_dbg_io, fcport->vha, 0x3019, "FCP I/O protocol failure (0x%x/0x%x).\n", rsp_info_len, rsp_info[3]); @@ -1661,7 +1661,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) if (!lscsi_status && ((unsigned)(scsi_bufflen(cp) - resid) < cp->underflow)) { - ql_dbg(ql_dbg_io, vha, 0x301a, + ql_dbg(ql_dbg_io, fcport->vha, 0x301a, "Mid-layer underflow " "detected (0x%x of 0x%x bytes).\n", resid, scsi_bufflen(cp)); @@ -1673,7 +1673,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) res = DID_OK << 16 | lscsi_status; if (lscsi_status == SAM_STAT_TASK_SET_FULL) { - ql_dbg(ql_dbg_io, vha, 0x301b, + ql_dbg(ql_dbg_io, fcport->vha, 0x301b, "QUEUE FULL detected.\n"); break; } @@ -1695,7 +1695,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) scsi_set_resid(cp, resid); if (scsi_status & SS_RESIDUAL_UNDER) { if (IS_FWI2_CAPABLE(ha) && fw_resid_len != resid_len) { - ql_dbg(ql_dbg_io, vha, 0x301d, + ql_dbg(ql_dbg_io, fcport->vha, 0x301d, "Dropped frame(s) detected " "(0x%x of 0x%x bytes).\n", resid, scsi_bufflen(cp)); @@ -1707,7 +1707,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) if (!lscsi_status && ((unsigned)(scsi_bufflen(cp) - resid) < cp->underflow)) { - ql_dbg(ql_dbg_io, vha, 0x301e, + ql_dbg(ql_dbg_io, fcport->vha, 0x301e, "Mid-layer underflow " "detected (0x%x of 0x%x bytes).\n", resid, scsi_bufflen(cp)); @@ -1716,7 +1716,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) break; } } else { - ql_dbg(ql_dbg_io, vha, 0x301f, + ql_dbg(ql_dbg_io, fcport->vha, 0x301f, "Dropped frame(s) detected (0x%x " "of 0x%x bytes).\n", resid, scsi_bufflen(cp)); @@ -1734,7 +1734,7 @@ check_scsi_status: */ if (lscsi_status != 0) { if (lscsi_status == SAM_STAT_TASK_SET_FULL) { - ql_dbg(ql_dbg_io, vha, 0x3020, + ql_dbg(ql_dbg_io, fcport->vha, 0x3020, "QUEUE FULL detected.\n"); logit = 1; break; @@ -1774,7 +1774,7 @@ check_scsi_status: break; } - ql_dbg(ql_dbg_io, vha, 0x3021, + ql_dbg(ql_dbg_io, fcport->vha, 0x3021, "Port down status: port-state=0x%x.\n", atomic_read(&fcport->state)); @@ -1796,7 +1796,7 @@ check_scsi_status: out: if (logit) - ql_dbg(ql_dbg_io, vha, 0x3022, + ql_dbg(ql_dbg_io, fcport->vha, 0x3022, "FCP command status: 0x%x-0x%x (0x%x) " "nexus=%ld:%d:%d portid=%02x%02x%02x oxid=0x%x " "cdb=%02x%02x%02x%02x%02x%02x%02x%02x%02x%02x len=0x%x " diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index bde3eb273b0..957a4b88e48 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -46,17 +46,17 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) struct qla_hw_data *ha = vha->hw; scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); - ql_dbg(ql_dbg_mbx, base_vha, 0x1000, "Entered %s.\n", __func__); + ql_dbg(ql_dbg_mbx, vha, 0x1000, "Entered %s.\n", __func__); if (ha->pdev->error_state > pci_channel_io_frozen) { - ql_log(ql_log_warn, base_vha, 0x1001, + ql_log(ql_log_warn, vha, 0x1001, "error_state is greater than pci_channel_io_frozen, " "exiting.\n"); return QLA_FUNCTION_TIMEOUT; } if (vha->device_flags & DFLG_DEV_FAILED) { - ql_log(ql_log_warn, base_vha, 0x1002, + ql_log(ql_log_warn, vha, 0x1002, "Device in failed state, exiting.\n"); return QLA_FUNCTION_TIMEOUT; } @@ -69,7 +69,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) if (ha->flags.pci_channel_io_perm_failure) { - ql_log(ql_log_warn, base_vha, 0x1003, + ql_log(ql_log_warn, vha, 0x1003, "Perm failure on EEH timeout MBX, exiting.\n"); return QLA_FUNCTION_TIMEOUT; } @@ -77,7 +77,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) if (ha->flags.isp82xx_fw_hung) { /* Setting Link-Down error */ mcp->mb[0] = MBS_LINK_DOWN_ERROR; - ql_log(ql_log_warn, base_vha, 0x1004, + ql_log(ql_log_warn, vha, 0x1004, "FW hung = %d.\n", ha->flags.isp82xx_fw_hung); return QLA_FUNCTION_TIMEOUT; } @@ -89,7 +89,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) */ if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, mcp->tov * HZ)) { /* Timeout occurred. Return error. */ - ql_log(ql_log_warn, base_vha, 0x1005, + ql_log(ql_log_warn, vha, 0x1005, "Cmd access timeout, cmd=0x%x, Exiting.\n", mcp->mb[0]); return QLA_FUNCTION_TIMEOUT; @@ -99,7 +99,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) /* Save mailbox command for debug */ ha->mcp = mcp; - ql_dbg(ql_dbg_mbx, base_vha, 0x1006, + ql_dbg(ql_dbg_mbx, vha, 0x1006, "Prepare to issue mbox cmd=0x%x.\n", mcp->mb[0]); spin_lock_irqsave(&ha->hardware_lock, flags); @@ -128,28 +128,28 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) iptr++; } - ql_dbg(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1111, + ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1111, "Loaded MBX registers (displayed in bytes) =.\n"); - ql_dump_buffer(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1112, + ql_dump_buffer(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1112, (uint8_t *)mcp->mb, 16); - ql_dbg(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1113, + ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1113, ".\n"); - ql_dump_buffer(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1114, + ql_dump_buffer(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1114, ((uint8_t *)mcp->mb + 0x10), 16); - ql_dbg(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1115, + ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1115, ".\n"); - ql_dump_buffer(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1116, + ql_dump_buffer(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1116, ((uint8_t *)mcp->mb + 0x20), 8); - ql_dbg(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1117, + ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1117, "I/O Address = %p.\n", optr); - ql_dump_regs(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x100e); + ql_dump_regs(ql_dbg_mbx + ql_dbg_buffer, vha, 0x100e); /* Issue set host interrupt command to send cmd out. */ ha->flags.mbox_int = 0; clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); /* Unlock mbx registers and wait for interrupt */ - ql_dbg(ql_dbg_mbx, base_vha, 0x100f, + ql_dbg(ql_dbg_mbx, vha, 0x100f, "Going to unlock irq & waiting for interrupts. " "jiffies=%lx.\n", jiffies); @@ -164,7 +164,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) spin_unlock_irqrestore(&ha->hardware_lock, flags); ha->flags.mbox_busy = 0; - ql_dbg(ql_dbg_mbx, base_vha, 0x1010, + ql_dbg(ql_dbg_mbx, vha, 0x1010, "Pending mailbox timeout, exiting.\n"); rval = QLA_FUNCTION_TIMEOUT; goto premature_exit; @@ -181,7 +181,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags); } else { - ql_dbg(ql_dbg_mbx, base_vha, 0x1011, + ql_dbg(ql_dbg_mbx, vha, 0x1011, "Cmd=%x Polling Mode.\n", command); if (IS_QLA82XX(ha)) { @@ -190,7 +190,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) spin_unlock_irqrestore(&ha->hardware_lock, flags); ha->flags.mbox_busy = 0; - ql_dbg(ql_dbg_mbx, base_vha, 0x1012, + ql_dbg(ql_dbg_mbx, vha, 0x1012, "Pending mailbox timeout, exiting.\n"); rval = QLA_FUNCTION_TIMEOUT; goto premature_exit; @@ -215,7 +215,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) command == MBC_LOAD_RISC_RAM_EXTENDED)) msleep(10); } /* while */ - ql_dbg(ql_dbg_mbx, base_vha, 0x1013, + ql_dbg(ql_dbg_mbx, vha, 0x1013, "Waited %d sec.\n", (uint)((jiffies - (wait_time - (mcp->tov * HZ)))/HZ)); } @@ -224,7 +224,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) if (ha->flags.mbox_int) { uint16_t *iptr2; - ql_dbg(ql_dbg_mbx, base_vha, 0x1014, + ql_dbg(ql_dbg_mbx, vha, 0x1014, "Cmd=%x completed.\n", command); /* Got interrupt. Clear the flag. */ @@ -237,7 +237,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) mcp->mb[0] = MBS_LINK_DOWN_ERROR; ha->mcp = NULL; rval = QLA_FUNCTION_FAILED; - ql_log(ql_log_warn, base_vha, 0x1015, + ql_log(ql_log_warn, vha, 0x1015, "FW hung = %d.\n", ha->flags.isp82xx_fw_hung); goto premature_exit; } @@ -269,13 +269,13 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) mb0 = RD_MAILBOX_REG(ha, ®->isp, 0); ictrl = RD_REG_WORD(®->isp.ictrl); } - ql_dbg(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1119, + ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1119, "MBX Command timeout for cmd %x.\n", command); - ql_dbg(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x111a, + ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x111a, "iocontrol=%x jiffies=%lx.\n", ictrl, jiffies); - ql_dbg(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x111b, + ql_dbg(ql_dbg_mbx + ql_dbg_buffer, vha, 0x111b, "mb[0] = 0x%x.\n", mb0); - ql_dump_regs(ql_dbg_mbx + ql_dbg_buffer, base_vha, 0x1019); + ql_dump_regs(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1019); rval = QLA_FUNCTION_TIMEOUT; } @@ -286,7 +286,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) ha->mcp = NULL; if ((abort_active || !io_lock_on) && !IS_NOPOLLING_TYPE(ha)) { - ql_dbg(ql_dbg_mbx, base_vha, 0x101a, + ql_dbg(ql_dbg_mbx, vha, 0x101a, "Checking for additional resp interrupt.\n"); /* polling mode for non isp_abort commands. */ @@ -298,7 +298,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) if (!io_lock_on || (mcp->flags & IOCTL_CMD) || ha->flags.eeh_busy) { /* not in dpc. schedule it for dpc to take over. */ - ql_dbg(ql_dbg_mbx, base_vha, 0x101b, + ql_dbg(ql_dbg_mbx, vha, 0x101b, "Timeout, schedule isp_abort_needed.\n"); if (!test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) && @@ -323,7 +323,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) } } else if (!abort_active) { /* call abort directly since we are in the DPC thread */ - ql_dbg(ql_dbg_mbx, base_vha, 0x101d, + ql_dbg(ql_dbg_mbx, vha, 0x101d, "Timeout, calling abort_isp.\n"); if (!test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) && @@ -352,7 +352,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) &vha->dpc_flags); } clear_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags); - ql_dbg(ql_dbg_mbx, base_vha, 0x101f, + ql_dbg(ql_dbg_mbx, vha, 0x101f, "Finished abort_isp.\n"); goto mbx_done; } -- cgit v1.2.3-70-g09d2 From a8faa263e6300567774f82b79144aca6cdaad983 Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Thu, 9 Feb 2012 11:15:52 -0800 Subject: [SCSI] qla2xxx: Change the log message when previous dump is available to retrieve for ISP82xx. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_nx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 751846f5c96..f0528539bbb 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -4098,8 +4098,9 @@ qla82xx_md_collect(scsi_qla_host_t *vha) data_ptr = (uint32_t *)ha->md_dump; if (ha->fw_dumped) { - ql_log(ql_log_info, vha, 0xb037, - "Firmware dump available to retrive\n"); + ql_log(ql_log_warn, vha, 0xb037, + "Firmware has been previously dumped (%p) " + "-- ignoring request.\n", ha->fw_dump); goto md_failed; } -- cgit v1.2.3-70-g09d2 From f55bfc88f74830fa6ea334687732a69fe7caf81f Mon Sep 17 00:00:00 2001 From: Chad Dupuis Date: Thu, 9 Feb 2012 11:15:53 -0800 Subject: [SCSI] qla2xxx: Perform firmware dump procedure on mailbox command timeout. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_mbx.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 957a4b88e48..adc2b14b03f 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -277,6 +277,12 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) "mb[0] = 0x%x.\n", mb0); ql_dump_regs(ql_dbg_mbx + ql_dbg_buffer, vha, 0x1019); + /* + * Attempt to capture a firmware dump for further analysis + * of the current firmware state + */ + ha->isp_ops->fw_dump(vha, 0); + rval = QLA_FUNCTION_TIMEOUT; } -- cgit v1.2.3-70-g09d2 From bc3f957c069f4a678e9d250e4979e2344755913a Mon Sep 17 00:00:00 2001 From: Chad Dupuis Date: Thu, 9 Feb 2012 11:15:54 -0800 Subject: [SCSI] qla2xxx: Update LICENSE.qla2xxx. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- Documentation/scsi/LICENSE.qla2xxx | 41 ++------------------------------------ 1 file changed, 2 insertions(+), 39 deletions(-) diff --git a/Documentation/scsi/LICENSE.qla2xxx b/Documentation/scsi/LICENSE.qla2xxx index 19e7cd4bba6..ce0fdf349a8 100644 --- a/Documentation/scsi/LICENSE.qla2xxx +++ b/Documentation/scsi/LICENSE.qla2xxx @@ -1,48 +1,11 @@ Copyright (c) 2003-2011 QLogic Corporation -QLogic Linux/ESX Fibre Channel HBA Driver +QLogic Linux FC-FCoE Driver -This program includes a device driver for Linux 2.6/ESX that may be -distributed with QLogic hardware specific firmware binary file. +This program includes a device driver for Linux 3.x. You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). -You may redistribute the hardware specific firmware binary file -under the following terms: - - 1. Redistribution of source code (only if applicable), - must retain the above copyright notice, this list of - conditions and the following disclaimer. - - 2. Redistribution in binary form must reproduce the above - copyright notice, this list of conditions and the - following disclaimer in the documentation and/or other - materials provided with the distribution. - - 3. The name of QLogic Corporation may not be used to - endorse or promote products derived from this software - without specific prior written permission - -REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE, -THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY -EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A -PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR -BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED -TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT -CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR -OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT, -TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN -ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN -COMBINATION WITH THIS PROGRAM. EXHIBIT A -- cgit v1.2.3-70-g09d2 From 733a95bd39d79c5759c1f7016a94c08e7367076d Mon Sep 17 00:00:00 2001 From: Joe Carnuccio Date: Thu, 9 Feb 2012 11:15:55 -0800 Subject: [SCSI] qla2xxx: Remove EDC sysfs interface. Signed-off-by: Joe Carnuccio Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 140 ---------------------------------------- drivers/scsi/qla2xxx/qla_dbg.c | 6 +- drivers/scsi/qla2xxx/qla_def.h | 4 -- drivers/scsi/qla2xxx/qla_os.c | 3 - 4 files changed, 4 insertions(+), 149 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index e21db2f7822..5926f5a87ea 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -627,144 +627,6 @@ static struct bin_attribute sysfs_reset_attr = { .write = qla2x00_sysfs_write_reset, }; -static ssize_t -qla2x00_sysfs_write_edc(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) -{ - struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj, - struct device, kobj))); - struct qla_hw_data *ha = vha->hw; - uint16_t dev, adr, opt, len; - int rval; - - ha->edc_data_len = 0; - - if (!capable(CAP_SYS_ADMIN) || off != 0 || count < 8) - return -EINVAL; - - if (!ha->edc_data) { - ha->edc_data = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, - &ha->edc_data_dma); - if (!ha->edc_data) { - ql_log(ql_log_warn, vha, 0x7073, - "Unable to allocate memory for EDC write.\n"); - return -ENOMEM; - } - } - - dev = le16_to_cpup((void *)&buf[0]); - adr = le16_to_cpup((void *)&buf[2]); - opt = le16_to_cpup((void *)&buf[4]); - len = le16_to_cpup((void *)&buf[6]); - - if (!(opt & BIT_0)) - if (len == 0 || len > DMA_POOL_SIZE || len > count - 8) - return -EINVAL; - - memcpy(ha->edc_data, &buf[8], len); - - rval = qla2x00_write_sfp(vha, ha->edc_data_dma, ha->edc_data, - dev, adr, len, opt); - if (rval != QLA_SUCCESS) { - ql_log(ql_log_warn, vha, 0x7074, - "Unable to write EDC (%x) %02x:%02x:%04x:%02x:%02hhx\n", - rval, dev, adr, opt, len, buf[8]); - return -EIO; - } - - return count; -} - -static struct bin_attribute sysfs_edc_attr = { - .attr = { - .name = "edc", - .mode = S_IWUSR, - }, - .size = 0, - .write = qla2x00_sysfs_write_edc, -}; - -static ssize_t -qla2x00_sysfs_write_edc_status(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) -{ - struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj, - struct device, kobj))); - struct qla_hw_data *ha = vha->hw; - uint16_t dev, adr, opt, len; - int rval; - - ha->edc_data_len = 0; - - if (!capable(CAP_SYS_ADMIN) || off != 0 || count < 8) - return -EINVAL; - - if (!ha->edc_data) { - ha->edc_data = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, - &ha->edc_data_dma); - if (!ha->edc_data) { - ql_log(ql_log_warn, vha, 0x708c, - "Unable to allocate memory for EDC status.\n"); - return -ENOMEM; - } - } - - dev = le16_to_cpup((void *)&buf[0]); - adr = le16_to_cpup((void *)&buf[2]); - opt = le16_to_cpup((void *)&buf[4]); - len = le16_to_cpup((void *)&buf[6]); - - if (!(opt & BIT_0)) - if (len == 0 || len > DMA_POOL_SIZE) - return -EINVAL; - - memset(ha->edc_data, 0, len); - rval = qla2x00_read_sfp(vha, ha->edc_data_dma, ha->edc_data, - dev, adr, len, opt); - if (rval != QLA_SUCCESS) { - ql_log(ql_log_info, vha, 0x7075, - "Unable to write EDC status (%x) %02x:%02x:%04x:%02x.\n", - rval, dev, adr, opt, len); - return -EIO; - } - - ha->edc_data_len = len; - - return count; -} - -static ssize_t -qla2x00_sysfs_read_edc_status(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) -{ - struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj, - struct device, kobj))); - struct qla_hw_data *ha = vha->hw; - - if (!capable(CAP_SYS_ADMIN) || off != 0 || count == 0) - return 0; - - if (!ha->edc_data || ha->edc_data_len == 0 || ha->edc_data_len > count) - return -EINVAL; - - memcpy(buf, ha->edc_data, ha->edc_data_len); - - return ha->edc_data_len; -} - -static struct bin_attribute sysfs_edc_status_attr = { - .attr = { - .name = "edc_status", - .mode = S_IRUSR | S_IWUSR, - }, - .size = 0, - .write = qla2x00_sysfs_write_edc_status, - .read = qla2x00_sysfs_read_edc_status, -}; - static ssize_t qla2x00_sysfs_read_xgmac_stats(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, @@ -880,8 +742,6 @@ static struct sysfs_entry { { "vpd", &sysfs_vpd_attr, 1 }, { "sfp", &sysfs_sfp_attr, 1 }, { "reset", &sysfs_reset_attr, }, - { "edc", &sysfs_edc_attr, 2 }, - { "edc_status", &sysfs_edc_status_attr, 2 }, { "xgmac_stats", &sysfs_xgmac_stats_attr, 3 }, { "dcbx_tlv", &sysfs_dcbx_tlv_attr, 3 }, { NULL }, diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index c28309bc3da..d16b1c04512 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -21,8 +21,10 @@ * | Async Events | 0x505d | 0x502b-0x502f | * | | | 0x5047,0x5052 | * | Timer Routines | 0x6011 | 0x600e-0x600f | - * | User Space Interactions | 0x709e | 0x7018,0x702e | - * | | | 0x7039,0x7045 | + * | User Space Interactions | 0x709f | 0x7018,0x702e, | + * | | | 0x7039,0x7045, | + * | | | 0x7073-0x7075, | + * | | | 0x708c | * | Task Management | 0x803c | 0x8025-0x8026 | * | | | 0x800b,0x8039 | * | AER/EEH | 0x900f | | diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 1281f5be676..9d353ca4e1c 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2646,10 +2646,6 @@ struct qla_hw_data { void *sfp_data; dma_addr_t sfp_data_dma; - uint8_t *edc_data; - dma_addr_t edc_data_dma; - uint16_t edc_data_len; - #define XGMAC_DATA_SIZE 4096 void *xgmac_data; dma_addr_t xgmac_data_dma; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index a8de6a3de49..ffa3488ecca 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -3233,9 +3233,6 @@ qla2x00_mem_free(struct qla_hw_data *ha) if (ha->sfp_data) dma_pool_free(ha->s_dma_pool, ha->sfp_data, ha->sfp_data_dma); - if (ha->edc_data) - dma_pool_free(ha->s_dma_pool, ha->edc_data, ha->edc_data_dma); - if (ha->ms_iocb) dma_pool_free(ha->s_dma_pool, ha->ms_iocb, ha->ms_iocb_dma); -- cgit v1.2.3-70-g09d2 From 7a67735b07aa1bf61b8535eec6f6fb6474cf7926 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Thu, 9 Feb 2012 11:15:56 -0800 Subject: [SCSI] qla2xxx: Cache swl during fabric discovery. Rather than continuously allocating and freeing swl within the discovery process, simply pre-allocate it the first time that it's needed, cache it through the rest of the lifecycle of the driver and free it at module unload. Signed-off-by: Andrew Vasquez Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_def.h | 2 ++ drivers/scsi/qla2xxx/qla_init.c | 12 +++++------- drivers/scsi/qla2xxx/qla_os.c | 1 + 3 files changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 9d353ca4e1c..649748ffbe7 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2674,6 +2674,8 @@ struct qla_hw_data { void *async_pd; dma_addr_t async_pd_dma; + void *swl; + /* These are used by mailbox operations. */ volatile uint16_t mailbox_out[MAILBOX_REGISTER_COUNT]; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index b28eb40d8ad..24b2d111859 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3133,20 +3133,21 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, rval = QLA_SUCCESS; /* Try GID_PT to get device list, else GAN. */ - swl = kcalloc(MAX_FIBRE_DEVICES, sizeof(sw_info_t), GFP_KERNEL); + if (!ha->swl) + ha->swl = kcalloc(MAX_FIBRE_DEVICES, sizeof(sw_info_t), + GFP_KERNEL); + swl = ha->swl; if (!swl) { /*EMPTY*/ ql_dbg(ql_dbg_disc, vha, 0x2054, "GID_PT allocations failed, fallback on GA_NXT.\n"); } else { + memset(swl, 0, MAX_FIBRE_DEVICES * sizeof(sw_info_t)); if (qla2x00_gid_pt(vha, swl) != QLA_SUCCESS) { - kfree(swl); swl = NULL; } else if (qla2x00_gpn_id(vha, swl) != QLA_SUCCESS) { - kfree(swl); swl = NULL; } else if (qla2x00_gnn_id(vha, swl) != QLA_SUCCESS) { - kfree(swl); swl = NULL; } else if (ql2xiidmaenable && qla2x00_gfpn_id(vha, swl) == QLA_SUCCESS) { @@ -3164,7 +3165,6 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, if (new_fcport == NULL) { ql_log(ql_log_warn, vha, 0x205e, "Failed to allocate memory for fcport.\n"); - kfree(swl); return (QLA_MEMORY_ALLOC_FAILED); } new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED); @@ -3341,14 +3341,12 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, if (new_fcport == NULL) { ql_log(ql_log_warn, vha, 0x2066, "Memory allocation failed for fcport.\n"); - kfree(swl); return (QLA_MEMORY_ALLOC_FAILED); } new_fcport->flags |= (FCF_FABRIC_DEVICE | FCF_LOGIN_NEEDED); new_fcport->d_id.b24 = nxt_d_id.b24; } - kfree(swl); kfree(new_fcport); return (rval); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index ffa3488ecca..94ff3a59147 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -3280,6 +3280,7 @@ qla2x00_mem_free(struct qla_hw_data *ha) vfree(ha->optrom_buffer); kfree(ha->nvram); kfree(ha->npiv_info); + kfree(ha->swl); ha->srb_mempool = NULL; ha->ctx_mempool = NULL; -- cgit v1.2.3-70-g09d2 From 642ef983861a6a7ba41e9d7c0aa4da8f6d5af5bf Mon Sep 17 00:00:00 2001 From: Chad Dupuis Date: Thu, 9 Feb 2012 11:15:57 -0800 Subject: [SCSI] qla2xxx: Add ha->max_fibre_devices to keep track of the maximum number of targets. Add a field to the qla_hw_data struct to allow us to set the maximum number of fabric devices on a per adapter basis based on ISP type. [jejb: fix up missing rval = QLA_SUCCESS to prevent uninit var warning] Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_dbg.c | 4 +-- drivers/scsi/qla2xxx/qla_def.h | 20 +++++++++------ drivers/scsi/qla2xxx/qla_gs.c | 52 +++++++++++++++++++++++---------------- drivers/scsi/qla2xxx/qla_init.c | 11 ++++----- drivers/scsi/qla2xxx/qla_inline.h | 6 +++++ drivers/scsi/qla2xxx/qla_mid.c | 2 +- drivers/scsi/qla2xxx/qla_os.c | 30 +++++++++++++--------- 7 files changed, 77 insertions(+), 48 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index d16b1c04512..897731b93df 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -89,7 +89,7 @@ qla24xx_dump_ram(struct qla_hw_data *ha, uint32_t addr, uint32_t *ram, WRT_REG_WORD(®->mailbox0, MBC_DUMP_RISC_RAM_EXTENDED); clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); - dwords = GID_LIST_SIZE / 4; + dwords = qla2x00_gid_list_size(ha) / 4; for (cnt = 0; cnt < ram_dwords && rval == QLA_SUCCESS; cnt += dwords, addr += dwords) { if (cnt + dwords > ram_dwords) @@ -264,7 +264,7 @@ qla2xxx_dump_ram(struct qla_hw_data *ha, uint32_t addr, uint16_t *ram, WRT_MAILBOX_REG(ha, reg, 0, MBC_DUMP_RISC_RAM_EXTENDED); clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); - words = GID_LIST_SIZE / 2; + words = qla2x00_gid_list_size(ha) / 2; for (cnt = 0; cnt < ram_words && rval == QLA_SUCCESS; cnt += words, addr += words) { if (cnt + words > ram_words) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 649748ffbe7..a2443031dbe 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -125,7 +125,10 @@ * Fibre Channel device definitions. */ #define WWN_SIZE 8 /* Size of WWPN, WWN & WWNN */ -#define MAX_FIBRE_DEVICES 512 +#define MAX_FIBRE_DEVICES_2100 512 +#define MAX_FIBRE_DEVICES_2400 2048 +#define MAX_FIBRE_DEVICES_LOOP 128 +#define MAX_FIBRE_DEVICES_MAX MAX_FIBRE_DEVICES_2400 #define MAX_FIBRE_LUNS 0xFFFF #define MAX_HOST_COUNT 16 @@ -133,8 +136,6 @@ * Host adapter default definitions. */ #define MAX_BUSES 1 /* We only have one bus today */ -#define MAX_TARGETS_2100 MAX_FIBRE_DEVICES -#define MAX_TARGETS_2200 MAX_FIBRE_DEVICES #define MIN_LUNS 8 #define MAX_LUNS MAX_FIBRE_LUNS #define MAX_CMDS_PER_LUN 255 @@ -1773,7 +1774,6 @@ static const char * const port_state_str[] = { #define GID_PT_CMD 0x1A1 #define GID_PT_REQ_SIZE (16 + 4) -#define GID_PT_RSP_SIZE (16 + (MAX_FIBRE_DEVICES * 4)) #define GPN_ID_CMD 0x112 #define GPN_ID_REQ_SIZE (16 + 4) @@ -2063,7 +2063,9 @@ struct ct_sns_rsp { } ga_nxt; struct { - struct ct_sns_gid_pt_data entries[MAX_FIBRE_DEVICES]; + /* Assume the largest number of targets for the union */ + struct ct_sns_gid_pt_data + entries[MAX_FIBRE_DEVICES_MAX]; } gid_pt; struct { @@ -2124,7 +2126,11 @@ struct ct_sns_pkt { #define GID_PT_SNS_SCMD_LEN 6 #define GID_PT_SNS_CMD_SIZE 28 -#define GID_PT_SNS_DATA_SIZE (MAX_FIBRE_DEVICES * 4 + 16) +/* + * Assume MAX_FIBRE_DEVICES_2100 as these defines are only used with older + * adapters. + */ +#define GID_PT_SNS_DATA_SIZE (MAX_FIBRE_DEVICES_2100 * 4 + 16) #define GPN_ID_SNS_SCMD_LEN 6 #define GPN_ID_SNS_CMD_SIZE 28 @@ -2172,7 +2178,6 @@ struct gid_list_info { uint16_t loop_id; /* ISP23XX -- 6 bytes. */ uint16_t reserved_1; /* ISP24XX -- 8 bytes. */ }; -#define GID_LIST_SIZE (sizeof(struct gid_list_info) * MAX_FIBRE_DEVICES) /* NPIV */ typedef struct vport_info { @@ -2499,6 +2504,7 @@ struct qla_hw_data { atomic_t loop_down_timer; /* loop down timer */ uint8_t link_down_timeout; /* link down timeout */ uint16_t max_loop_id; + uint16_t max_fibre_devices; /* Maximum number of targets */ uint16_t fb_rev; uint16_t min_external_loopid; /* First external loop Id */ diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index 69243036529..bf89e6c22a3 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -240,6 +240,12 @@ qla2x00_ga_nxt(scsi_qla_host_t *vha, fc_port_t *fcport) return (rval); } +static inline int +qla2x00_gid_pt_rsp_size(scsi_qla_host_t *vha) +{ + return vha->hw->max_fibre_devices * 4 + 16; +} + /** * qla2x00_gid_pt() - SNS scan for fabric devices via GID_PT command. * @ha: HA context @@ -261,20 +267,21 @@ qla2x00_gid_pt(scsi_qla_host_t *vha, sw_info_t *list) struct ct_sns_gid_pt_data *gid_data; struct qla_hw_data *ha = vha->hw; + uint16_t gid_pt_rsp_size; if (IS_QLA2100(ha) || IS_QLA2200(ha)) return qla2x00_sns_gid_pt(vha, list); gid_data = NULL; - + gid_pt_rsp_size = qla2x00_gid_pt_rsp_size(vha); /* Issue GID_PT */ /* Prepare common MS IOCB */ ms_pkt = ha->isp_ops->prep_ms_iocb(vha, GID_PT_REQ_SIZE, - GID_PT_RSP_SIZE); + gid_pt_rsp_size); /* Prepare CT request */ ct_req = qla2x00_prep_ct_req(&ha->ct_sns->p.req, GID_PT_CMD, - GID_PT_RSP_SIZE); + gid_pt_rsp_size); ct_rsp = &ha->ct_sns->p.rsp; /* Prepare CT arguments -- port_type */ @@ -292,7 +299,7 @@ qla2x00_gid_pt(scsi_qla_host_t *vha, sw_info_t *list) rval = QLA_FUNCTION_FAILED; } else { /* Set port IDs in switch info list. */ - for (i = 0; i < MAX_FIBRE_DEVICES; i++) { + for (i = 0; i < ha->max_fibre_devices; i++) { gid_data = &ct_rsp->rsp.gid_pt.entries[i]; list[i].d_id.b.domain = gid_data->port_id[0]; list[i].d_id.b.area = gid_data->port_id[1]; @@ -313,7 +320,7 @@ qla2x00_gid_pt(scsi_qla_host_t *vha, sw_info_t *list) * single call. Return a failed status, and let GA_NXT handle * the overload. */ - if (i == MAX_FIBRE_DEVICES) + if (i == ha->max_fibre_devices) rval = QLA_FUNCTION_FAILED; } @@ -330,7 +337,7 @@ qla2x00_gid_pt(scsi_qla_host_t *vha, sw_info_t *list) int qla2x00_gpn_id(scsi_qla_host_t *vha, sw_info_t *list) { - int rval; + int rval = QLA_SUCCESS; uint16_t i; ms_iocb_entry_t *ms_pkt; @@ -341,7 +348,7 @@ qla2x00_gpn_id(scsi_qla_host_t *vha, sw_info_t *list) if (IS_QLA2100(ha) || IS_QLA2200(ha)) return qla2x00_sns_gpn_id(vha, list); - for (i = 0; i < MAX_FIBRE_DEVICES; i++) { + for (i = 0; i < ha->max_fibre_devices; i++) { /* Issue GPN_ID */ /* Prepare common MS IOCB */ ms_pkt = ha->isp_ops->prep_ms_iocb(vha, GPN_ID_REQ_SIZE, @@ -391,7 +398,7 @@ qla2x00_gpn_id(scsi_qla_host_t *vha, sw_info_t *list) int qla2x00_gnn_id(scsi_qla_host_t *vha, sw_info_t *list) { - int rval; + int rval = QLA_SUCCESS; uint16_t i; struct qla_hw_data *ha = vha->hw; ms_iocb_entry_t *ms_pkt; @@ -401,7 +408,7 @@ qla2x00_gnn_id(scsi_qla_host_t *vha, sw_info_t *list) if (IS_QLA2100(ha) || IS_QLA2200(ha)) return qla2x00_sns_gnn_id(vha, list); - for (i = 0; i < MAX_FIBRE_DEVICES; i++) { + for (i = 0; i < ha->max_fibre_devices; i++) { /* Issue GNN_ID */ /* Prepare common MS IOCB */ ms_pkt = ha->isp_ops->prep_ms_iocb(vha, GNN_ID_REQ_SIZE, @@ -735,7 +742,7 @@ qla2x00_prep_sns_cmd(scsi_qla_host_t *vha, uint16_t cmd, uint16_t scmd_len, static int qla2x00_sns_ga_nxt(scsi_qla_host_t *vha, fc_port_t *fcport) { - int rval; + int rval = QLA_SUCCESS; struct qla_hw_data *ha = vha->hw; struct sns_cmd_pkt *sns_cmd; @@ -814,11 +821,14 @@ qla2x00_sns_gid_pt(scsi_qla_host_t *vha, sw_info_t *list) uint16_t i; uint8_t *entry; struct sns_cmd_pkt *sns_cmd; + uint16_t gid_pt_sns_data_size; + + gid_pt_sns_data_size = qla2x00_gid_pt_rsp_size(vha); /* Issue GID_PT. */ /* Prepare SNS command request. */ sns_cmd = qla2x00_prep_sns_cmd(vha, GID_PT_CMD, GID_PT_SNS_SCMD_LEN, - GID_PT_SNS_DATA_SIZE); + gid_pt_sns_data_size); /* Prepare SNS command arguments -- port_type. */ sns_cmd->p.cmd.param[0] = NS_NX_PORT_TYPE; @@ -839,7 +849,7 @@ qla2x00_sns_gid_pt(scsi_qla_host_t *vha, sw_info_t *list) rval = QLA_FUNCTION_FAILED; } else { /* Set port IDs in switch info list. */ - for (i = 0; i < MAX_FIBRE_DEVICES; i++) { + for (i = 0; i < ha->max_fibre_devices; i++) { entry = &sns_cmd->p.gid_data[(i * 4) + 16]; list[i].d_id.b.domain = entry[1]; list[i].d_id.b.area = entry[2]; @@ -858,7 +868,7 @@ qla2x00_sns_gid_pt(scsi_qla_host_t *vha, sw_info_t *list) * single call. Return a failed status, and let GA_NXT handle * the overload. */ - if (i == MAX_FIBRE_DEVICES) + if (i == ha->max_fibre_devices) rval = QLA_FUNCTION_FAILED; } @@ -877,12 +887,12 @@ qla2x00_sns_gid_pt(scsi_qla_host_t *vha, sw_info_t *list) static int qla2x00_sns_gpn_id(scsi_qla_host_t *vha, sw_info_t *list) { - int rval; + int rval = QLA_SUCCESS; struct qla_hw_data *ha = vha->hw; uint16_t i; struct sns_cmd_pkt *sns_cmd; - for (i = 0; i < MAX_FIBRE_DEVICES; i++) { + for (i = 0; i < ha->max_fibre_devices; i++) { /* Issue GPN_ID */ /* Prepare SNS command request. */ sns_cmd = qla2x00_prep_sns_cmd(vha, GPN_ID_CMD, @@ -933,12 +943,12 @@ qla2x00_sns_gpn_id(scsi_qla_host_t *vha, sw_info_t *list) static int qla2x00_sns_gnn_id(scsi_qla_host_t *vha, sw_info_t *list) { - int rval; + int rval = QLA_SUCCESS; struct qla_hw_data *ha = vha->hw; uint16_t i; struct sns_cmd_pkt *sns_cmd; - for (i = 0; i < MAX_FIBRE_DEVICES; i++) { + for (i = 0; i < ha->max_fibre_devices; i++) { /* Issue GNN_ID */ /* Prepare SNS command request. */ sns_cmd = qla2x00_prep_sns_cmd(vha, GNN_ID_CMD, @@ -1734,7 +1744,7 @@ qla2x00_fdmi_register(scsi_qla_host_t *vha) int qla2x00_gfpn_id(scsi_qla_host_t *vha, sw_info_t *list) { - int rval; + int rval = QLA_SUCCESS; uint16_t i; struct qla_hw_data *ha = vha->hw; ms_iocb_entry_t *ms_pkt; @@ -1744,7 +1754,7 @@ qla2x00_gfpn_id(scsi_qla_host_t *vha, sw_info_t *list) if (!IS_IIDMA_CAPABLE(ha)) return QLA_FUNCTION_FAILED; - for (i = 0; i < MAX_FIBRE_DEVICES; i++) { + for (i = 0; i < ha->max_fibre_devices; i++) { /* Issue GFPN_ID */ /* Prepare common MS IOCB */ ms_pkt = ha->isp_ops->prep_ms_iocb(vha, GFPN_ID_REQ_SIZE, @@ -1856,7 +1866,7 @@ qla2x00_gpsc(scsi_qla_host_t *vha, sw_info_t *list) if (rval) return rval; - for (i = 0; i < MAX_FIBRE_DEVICES; i++) { + for (i = 0; i < ha->max_fibre_devices; i++) { /* Issue GFPN_ID */ /* Prepare common MS IOCB */ ms_pkt = qla24xx_prep_ms_fm_iocb(vha, GPSC_REQ_SIZE, @@ -1957,7 +1967,7 @@ qla2x00_gff_id(scsi_qla_host_t *vha, sw_info_t *list) struct qla_hw_data *ha = vha->hw; uint8_t fcp_scsi_features = 0; - for (i = 0; i < MAX_FIBRE_DEVICES; i++) { + for (i = 0; i < ha->max_fibre_devices; i++) { /* Set default FC4 Type as UNKNOWN so the default is to * Process this port */ list[i].fc4_type = FC4_TYPE_UNKNOWN; diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 24b2d111859..2627c87a4a3 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -2567,8 +2567,7 @@ qla2x00_configure_loop(scsi_qla_host_t *vha) ql_dbg(ql_dbg_disc, vha, 0x2015, "Loop resync needed, failing.\n"); rval = QLA_FUNCTION_FAILED; - } - else + } else rval = qla2x00_configure_local_loop(vha); } @@ -2642,7 +2641,7 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha) found_devs = 0; new_fcport = NULL; - entries = MAX_FIBRE_DEVICES; + entries = MAX_FIBRE_DEVICES_LOOP; ql_dbg(ql_dbg_disc, vha, 0x2016, "Getting FCAL position map.\n"); @@ -2650,7 +2649,7 @@ qla2x00_configure_local_loop(scsi_qla_host_t *vha) qla2x00_get_fcal_position_map(vha, NULL); /* Get list of logged in devices. */ - memset(ha->gid_list, 0, GID_LIST_SIZE); + memset(ha->gid_list, 0, qla2x00_gid_list_size(ha)); rval = qla2x00_get_id_list(vha, ha->gid_list, ha->gid_list_dma, &entries); if (rval != QLA_SUCCESS) @@ -3134,7 +3133,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, /* Try GID_PT to get device list, else GAN. */ if (!ha->swl) - ha->swl = kcalloc(MAX_FIBRE_DEVICES, sizeof(sw_info_t), + ha->swl = kcalloc(ha->max_fibre_devices, sizeof(sw_info_t), GFP_KERNEL); swl = ha->swl; if (!swl) { @@ -3142,7 +3141,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, ql_dbg(ql_dbg_disc, vha, 0x2054, "GID_PT allocations failed, fallback on GA_NXT.\n"); } else { - memset(swl, 0, MAX_FIBRE_DEVICES * sizeof(sw_info_t)); + memset(swl, 0, ha->max_fibre_devices * sizeof(sw_info_t)); if (qla2x00_gid_pt(vha, swl) != QLA_SUCCESS) { swl = NULL; } else if (qla2x00_gpn_id(vha, swl) != QLA_SUCCESS) { diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index 3ea0cedc6e7..6e457643c63 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -181,3 +181,9 @@ qla2x00_init_timer(srb_t *sp, unsigned long tmo) add_timer(&sp->u.iocb_cmd.timer); sp->free = qla2x00_sp_free; } + +static inline int +qla2x00_gid_list_size(struct qla_hw_data *ha) +{ + return sizeof(struct gid_list_info) * ha->max_fibre_devices; +} diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index f488cc69fc7..aa062a1b0ca 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -479,7 +479,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport) host->max_channel = MAX_BUSES - 1; host->max_lun = ql2xmaxlun; host->unique_id = host->host_no; - host->max_id = MAX_TARGETS_2200; + host->max_id = ha->max_fibre_devices; host->transportt = qla2xxx_transport_vport_template; ql_dbg(ql_dbg_vport, vha, 0xa007, diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 94ff3a59147..094af74989d 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2135,7 +2135,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) char pci_info[30]; char fw_str[30]; struct scsi_host_template *sht; - int bars, max_id, mem_only = 0; + int bars, mem_only = 0; uint16_t req_length = 0, rsp_length = 0; struct req_que *req = NULL; struct rsp_que *rsp = NULL; @@ -2200,9 +2200,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->optrom_size = OPTROM_SIZE_2300; /* Assign ISP specific operations. */ - max_id = MAX_TARGETS_2200; if (IS_QLA2100(ha)) { - max_id = MAX_TARGETS_2100; + ha->max_fibre_devices = MAX_FIBRE_DEVICES_2100; ha->mbx_count = MAILBOX_REGISTER_COUNT_2100; req_length = REQUEST_ENTRY_CNT_2100; rsp_length = RESPONSE_ENTRY_CNT_2100; @@ -2214,6 +2213,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->nvram_data_off = ~0; ha->isp_ops = &qla2100_isp_ops; } else if (IS_QLA2200(ha)) { + ha->max_fibre_devices = MAX_FIBRE_DEVICES_2100; ha->mbx_count = MAILBOX_REGISTER_COUNT_2200; req_length = REQUEST_ENTRY_CNT_2200; rsp_length = RESPONSE_ENTRY_CNT_2100; @@ -2225,6 +2225,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->nvram_data_off = ~0; ha->isp_ops = &qla2100_isp_ops; } else if (IS_QLA23XX(ha)) { + ha->max_fibre_devices = MAX_FIBRE_DEVICES_2100; ha->mbx_count = MAILBOX_REGISTER_COUNT; req_length = REQUEST_ENTRY_CNT_2200; rsp_length = RESPONSE_ENTRY_CNT_2300; @@ -2238,6 +2239,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->nvram_data_off = ~0; ha->isp_ops = &qla2300_isp_ops; } else if (IS_QLA24XX_TYPE(ha)) { + ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400; ha->mbx_count = MAILBOX_REGISTER_COUNT; req_length = REQUEST_ENTRY_CNT_24XX; rsp_length = RESPONSE_ENTRY_CNT_2300; @@ -2252,6 +2254,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF; ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA; } else if (IS_QLA25XX(ha)) { + ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400; ha->mbx_count = MAILBOX_REGISTER_COUNT; req_length = REQUEST_ENTRY_CNT_24XX; rsp_length = RESPONSE_ENTRY_CNT_2300; @@ -2266,6 +2269,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF; ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA; } else if (IS_QLA81XX(ha)) { + ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400; ha->mbx_count = MAILBOX_REGISTER_COUNT; req_length = REQUEST_ENTRY_CNT_24XX; rsp_length = RESPONSE_ENTRY_CNT_2300; @@ -2280,6 +2284,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->nvram_conf_off = ~0; ha->nvram_data_off = ~0; } else if (IS_QLA82XX(ha)) { + ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400; ha->mbx_count = MAILBOX_REGISTER_COUNT; req_length = REQUEST_ENTRY_CNT_82XX; rsp_length = RESPONSE_ENTRY_CNT_82XX; @@ -2294,6 +2299,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->nvram_conf_off = FARX_ACCESS_NVRAM_CONF; ha->nvram_data_off = FARX_ACCESS_NVRAM_DATA; } else if (IS_QLA83XX(ha)) { + ha->max_fibre_devices = MAX_FIBRE_DEVICES_2400; ha->mbx_count = MAILBOX_REGISTER_COUNT; req_length = REQUEST_ENTRY_CNT_24XX; rsp_length = RESPONSE_ENTRY_CNT_2300; @@ -2312,10 +2318,11 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ql_dbg_pci(ql_dbg_init, pdev, 0x001e, "mbx_count=%d, req_length=%d, " "rsp_length=%d, max_loop_id=%d, init_cb_size=%d, " - "gid_list_info_size=%d, optrom_size=%d, nvram_npiv_size=%d, .\n", + "gid_list_info_size=%d, optrom_size=%d, nvram_npiv_size=%d, " + "max_fibre_devices=%d.\n", ha->mbx_count, req_length, rsp_length, ha->max_loop_id, ha->init_cb_size, ha->gid_list_info_size, ha->optrom_size, - ha->nvram_npiv_size); + ha->nvram_npiv_size, ha->max_fibre_devices); ql_dbg_pci(ql_dbg_init, pdev, 0x001f, "isp_ops=%p, flash_conf_off=%d, " "flash_data_off=%d, nvram_conf_off=%d, nvram_data_off=%d.\n", @@ -2389,7 +2396,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) "mgmt_svr_loop_id=%d, sg_tablesize=%d.\n", host->can_queue, base_vha->req, base_vha->mgmt_svr_loop_id, host->sg_tablesize); - host->max_id = max_id; + host->max_id = ha->max_fibre_devices; host->this_id = 255; host->cmd_per_lun = 3; host->unique_id = host->host_no; @@ -2939,8 +2946,8 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len, if (!ha->init_cb) goto fail; - ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, GID_LIST_SIZE, - &ha->gid_list_dma, GFP_KERNEL); + ha->gid_list = dma_alloc_coherent(&ha->pdev->dev, + qla2x00_gid_list_size(ha), &ha->gid_list_dma, GFP_KERNEL); if (!ha->gid_list) goto fail_free_init_cb; @@ -3155,7 +3162,8 @@ fail_free_srb_mempool: mempool_destroy(ha->srb_mempool); ha->srb_mempool = NULL; fail_free_gid_list: - dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list, + dma_free_coherent(&ha->pdev->dev, qla2x00_gid_list_size(ha), + ha->gid_list, ha->gid_list_dma); ha->gid_list = NULL; ha->gid_list_dma = 0; @@ -3247,8 +3255,8 @@ qla2x00_mem_free(struct qla_hw_data *ha) dma_pool_destroy(ha->s_dma_pool); if (ha->gid_list) - dma_free_coherent(&ha->pdev->dev, GID_LIST_SIZE, ha->gid_list, - ha->gid_list_dma); + dma_free_coherent(&ha->pdev->dev, qla2x00_gid_list_size(ha), + ha->gid_list, ha->gid_list_dma); if (IS_QLA82XX(ha)) { if (!list_empty(&ha->gbl_dsd_list)) { -- cgit v1.2.3-70-g09d2 From 0eba25df2190f191cb92879b225a0e484c3e5b51 Mon Sep 17 00:00:00 2001 From: Arun Easi Date: Thu, 9 Feb 2012 11:15:58 -0800 Subject: [SCSI] qla2xxx: Handle device mapping changes due to device logout. A device logout sent in the delete path of a fcport would clear the port handle binding inside the firmware. This could lead to queued work items for the fcport, if any, getting incorrect results. This patch fixes the issue by checking for device name changes after a call to get port database. Signed-off-by: Arun Easi Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 8 ++++++++ drivers/scsi/qla2xxx/qla_mbx.c | 19 +++++++++++++++++++ 2 files changed, 27 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 2627c87a4a3..b9465643396 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -350,6 +350,13 @@ qla2x00_async_login_done(struct scsi_qla_host *vha, fc_port_t *fcport, * requests. */ rval = qla2x00_get_port_database(vha, fcport, 0); + if (rval == QLA_NOT_LOGGED_IN) { + fcport->flags &= ~FCF_ASYNC_SENT; + fcport->flags |= FCF_LOGIN_NEEDED; + set_bit(RELOGIN_NEEDED, &vha->dpc_flags); + break; + } + if (rval != QLA_SUCCESS) { qla2x00_post_async_logout_work(vha, fcport, NULL); qla2x00_post_async_login_work(vha, fcport, NULL); @@ -3318,6 +3325,7 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha, fcport->flags |= FCF_LOGIN_NEEDED; if (fcport->loop_id != FC_NO_LOOP_ID && (fcport->flags & FCF_FCP2_DEVICE) == 0 && + (fcport->flags & FCF_ASYNC_SENT) == 0 && fcport->port_type != FCT_INITIATOR && fcport->port_type != FCT_BROADCAST) { ha->isp_ops->fabric_logout(vha, fcport->loop_id, diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index adc2b14b03f..b4a23394a7b 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -1289,6 +1289,7 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt) goto gpd_error_out; if (IS_FWI2_CAPABLE(ha)) { + uint64_t zero = 0; pd24 = (struct port_database_24xx *) pd; /* Check for logged in state. */ @@ -1302,6 +1303,14 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt) goto gpd_error_out; } + if (fcport->loop_id == FC_NO_LOOP_ID || + (memcmp(fcport->port_name, (uint8_t *)&zero, 8) && + memcmp(fcport->port_name, pd24->port_name, 8))) { + /* We lost the device mid way. */ + rval = QLA_NOT_LOGGED_IN; + goto gpd_error_out; + } + /* Names are little-endian. */ memcpy(fcport->node_name, pd24->node_name, WWN_SIZE); memcpy(fcport->port_name, pd24->port_name, WWN_SIZE); @@ -1318,6 +1327,8 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt) else fcport->port_type = FCT_TARGET; } else { + uint64_t zero = 0; + /* Check for logged in state. */ if (pd->master_state != PD_STATE_PORT_LOGGED_IN && pd->slave_state != PD_STATE_PORT_LOGGED_IN) { @@ -1330,6 +1341,14 @@ qla2x00_get_port_database(scsi_qla_host_t *vha, fc_port_t *fcport, uint8_t opt) goto gpd_error_out; } + if (fcport->loop_id == FC_NO_LOOP_ID || + (memcmp(fcport->port_name, (uint8_t *)&zero, 8) && + memcmp(fcport->port_name, pd->port_name, 8))) { + /* We lost the device mid way. */ + rval = QLA_NOT_LOGGED_IN; + goto gpd_error_out; + } + /* Names are little-endian. */ memcpy(fcport->node_name, pd->node_name, WWN_SIZE); memcpy(fcport->port_name, pd->port_name, WWN_SIZE); -- cgit v1.2.3-70-g09d2 From 98878a16bcf57e3983374b04a39f16e7dac4c87a Mon Sep 17 00:00:00 2001 From: Arun Easi Date: Thu, 9 Feb 2012 11:15:59 -0800 Subject: [SCSI] qla2xxx: Fix incorrect register access in qla2x00_start_iocbs(). Signed-off-by: Arun Easi Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_iocb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 8ce810373b5..eac95092449 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -490,7 +490,7 @@ qla2x00_start_iocbs(struct scsi_qla_host *vha, struct req_que *req) /* Set chip new ring index. */ if (ha->mqenable || IS_QLA83XX(ha)) { WRT_REG_DWORD(req->req_q_in, req->ring_index); - RD_REG_DWORD_RELAXED(®->isp24.req_q_in); + RD_REG_DWORD_RELAXED(&ha->iobase->isp24.hccr); } else if (IS_FWI2_CAPABLE(ha)) { WRT_REG_DWORD(®->isp24.req_q_in, req->ring_index); RD_REG_DWORD_RELAXED(®->isp24.req_q_in); -- cgit v1.2.3-70-g09d2 From dafdf8923fbd298cc7bd1ec00aaa69b8a5ceced0 Mon Sep 17 00:00:00 2001 From: Arun Easi Date: Thu, 9 Feb 2012 11:16:00 -0800 Subject: [SCSI] qla2xxx: Stop iteration after first failure in *_id functions. Signed-off-by: Arun Easi Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_gs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index bf89e6c22a3..3128f80441f 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -371,9 +371,11 @@ qla2x00_gpn_id(scsi_qla_host_t *vha, sw_info_t *list) /*EMPTY*/ ql_dbg(ql_dbg_disc, vha, 0x2056, "GPN_ID issue IOCB failed (%d).\n", rval); + break; } else if (qla2x00_chk_ms_status(vha, ms_pkt, ct_rsp, "GPN_ID") != QLA_SUCCESS) { rval = QLA_FUNCTION_FAILED; + break; } else { /* Save portname */ memcpy(list[i].port_name, @@ -431,9 +433,11 @@ qla2x00_gnn_id(scsi_qla_host_t *vha, sw_info_t *list) /*EMPTY*/ ql_dbg(ql_dbg_disc, vha, 0x2057, "GNN_ID issue IOCB failed (%d).\n", rval); + break; } else if (qla2x00_chk_ms_status(vha, ms_pkt, ct_rsp, "GNN_ID") != QLA_SUCCESS) { rval = QLA_FUNCTION_FAILED; + break; } else { /* Save nodename */ memcpy(list[i].node_name, @@ -1777,9 +1781,11 @@ qla2x00_gfpn_id(scsi_qla_host_t *vha, sw_info_t *list) /*EMPTY*/ ql_dbg(ql_dbg_disc, vha, 0x2023, "GFPN_ID issue IOCB failed (%d).\n", rval); + break; } else if (qla2x00_chk_ms_status(vha, ms_pkt, ct_rsp, "GFPN_ID") != QLA_SUCCESS) { rval = QLA_FUNCTION_FAILED; + break; } else { /* Save fabric portname */ memcpy(list[i].fabric_port_name, -- cgit v1.2.3-70-g09d2 From a6fe35c052c4fdd1e8e21251f14eea0bd4bbd25b Mon Sep 17 00:00:00 2001 From: Arun Easi Date: Thu, 9 Feb 2012 11:16:01 -0800 Subject: [SCSI] qla2xxx: Avoid invalid request queue dereference for bad response packets. Signed-off-by: Arun Easi Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index fdead64eb7d..f79844ce712 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1883,28 +1883,34 @@ qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt) struct qla_hw_data *ha = vha->hw; const char func[] = "ERROR-IOCB"; uint16_t que = MSW(pkt->handle); - struct req_que *req = ha->req_q_map[que]; + struct req_que *req = NULL; int res = DID_ERROR << 16; ql_dbg(ql_dbg_async, vha, 0x502a, "type of error status in response: 0x%x\n", pkt->entry_status); + if (que >= ha->max_req_queues || !ha->req_q_map[que]) + goto fatal; + + req = ha->req_q_map[que]; + if (pkt->entry_status & RF_BUSY) res = DID_BUS_BUSY << 16; sp = qla2x00_get_sp_from_handle(vha, func, req, pkt); - if (sp) + if (sp) { sp->done(ha, sp, res); - else { - ql_log(ql_log_warn, vha, 0x5030, - "Error entry - invalid handle.\n"); - - if (IS_QLA82XX(ha)) - set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags); - else - set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); - qla2xxx_wake_dpc(vha); + return; } +fatal: + ql_log(ql_log_warn, vha, 0x5030, + "Error entry - invalid handle/queue.\n"); + + if (IS_QLA82XX(ha)) + set_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags); + else + set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); + qla2xxx_wake_dpc(vha); } /** -- cgit v1.2.3-70-g09d2 From 3d2d752549150c2706f6bf8d8a2cceb89ef9f42e Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Fri, 10 Feb 2012 01:18:34 -0800 Subject: [SCSI] isci: T10 DIF support This allows the controller to do WRITE_INSERT and READ_STRIP for SAS disks that support protection information. SAS disks must be formatted with protection information to use this feature via sg_format. sg3_utils-1.32 -- sg_format version 1.19 20110730 sg_format usage: sg_format --format --verbose --pinfo /dev/sda Acked-by: Martin K. Petersen Signed-off-by: Dave Jiang Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/init.c | 7 ++ drivers/scsi/isci/request.c | 147 +++++++++++++++++++++++++++++++++++ drivers/scsi/isci/scu_task_context.h | 55 +++++++++---- 3 files changed, 193 insertions(+), 16 deletions(-) diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 17c4c2c89c2..6b911e0aea3 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -528,6 +528,13 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic goto err_host_alloc; } pci_info->hosts[i] = h; + + /* turn on DIF support */ + scsi_host_set_prot(h->shost, + SHOST_DIF_TYPE1_PROTECTION | + SHOST_DIF_TYPE2_PROTECTION | + SHOST_DIF_TYPE3_PROTECTION); + scsi_host_set_guard(h->shost, SHOST_DIX_GUARD_CRC); } err = isci_setup_interrupts(pdev); diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 192cb48d849..751368b46b4 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -53,6 +53,7 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +#include #include "isci.h" #include "task.h" #include "request.h" @@ -264,6 +265,141 @@ static void scu_ssp_reqeust_construct_task_context( task_context->response_iu_lower = lower_32_bits(dma_addr); } +static u8 scu_bg_blk_size(struct scsi_device *sdp) +{ + switch (sdp->sector_size) { + case 512: + return 0; + case 1024: + return 1; + case 4096: + return 3; + default: + return 0xff; + } +} + +static u32 scu_dif_bytes(u32 len, u32 sector_size) +{ + return (len >> ilog2(sector_size)) * 8; +} + +static void scu_ssp_ireq_dif_insert(struct isci_request *ireq, u8 type, u8 op) +{ + struct scu_task_context *tc = ireq->tc; + struct scsi_cmnd *scmd = ireq->ttype_ptr.io_task_ptr->uldd_task; + u8 blk_sz = scu_bg_blk_size(scmd->device); + + tc->block_guard_enable = 1; + tc->blk_prot_en = 1; + tc->blk_sz = blk_sz; + /* DIF write insert */ + tc->blk_prot_func = 0x2; + + tc->transfer_length_bytes += scu_dif_bytes(tc->transfer_length_bytes, + scmd->device->sector_size); + + /* always init to 0, used by hw */ + tc->interm_crc_val = 0; + + tc->init_crc_seed = 0; + tc->app_tag_verify = 0; + tc->app_tag_gen = 0; + tc->ref_tag_seed_verify = 0; + + /* always init to same as bg_blk_sz */ + tc->UD_bytes_immed_val = scmd->device->sector_size; + + tc->reserved_DC_0 = 0; + + /* always init to 8 */ + tc->DIF_bytes_immed_val = 8; + + tc->reserved_DC_1 = 0; + tc->bgc_blk_sz = scmd->device->sector_size; + tc->reserved_E0_0 = 0; + tc->app_tag_gen_mask = 0; + + /** setup block guard control **/ + tc->bgctl = 0; + + /* DIF write insert */ + tc->bgctl_f.op = 0x2; + + tc->app_tag_verify_mask = 0; + + /* must init to 0 for hw */ + tc->blk_guard_err = 0; + + tc->reserved_E8_0 = 0; + + if ((type & SCSI_PROT_DIF_TYPE1) || (type & SCSI_PROT_DIF_TYPE2)) + tc->ref_tag_seed_gen = scsi_get_lba(scmd) & 0xffffffff; + else if (type & SCSI_PROT_DIF_TYPE3) + tc->ref_tag_seed_gen = 0; +} + +static void scu_ssp_ireq_dif_strip(struct isci_request *ireq, u8 type, u8 op) +{ + struct scu_task_context *tc = ireq->tc; + struct scsi_cmnd *scmd = ireq->ttype_ptr.io_task_ptr->uldd_task; + u8 blk_sz = scu_bg_blk_size(scmd->device); + + tc->block_guard_enable = 1; + tc->blk_prot_en = 1; + tc->blk_sz = blk_sz; + /* DIF read strip */ + tc->blk_prot_func = 0x1; + + tc->transfer_length_bytes += scu_dif_bytes(tc->transfer_length_bytes, + scmd->device->sector_size); + + /* always init to 0, used by hw */ + tc->interm_crc_val = 0; + + tc->init_crc_seed = 0; + tc->app_tag_verify = 0; + tc->app_tag_gen = 0; + + if ((type & SCSI_PROT_DIF_TYPE1) || (type & SCSI_PROT_DIF_TYPE2)) + tc->ref_tag_seed_verify = scsi_get_lba(scmd) & 0xffffffff; + else if (type & SCSI_PROT_DIF_TYPE3) + tc->ref_tag_seed_verify = 0; + + /* always init to same as bg_blk_sz */ + tc->UD_bytes_immed_val = scmd->device->sector_size; + + tc->reserved_DC_0 = 0; + + /* always init to 8 */ + tc->DIF_bytes_immed_val = 8; + + tc->reserved_DC_1 = 0; + tc->bgc_blk_sz = scmd->device->sector_size; + tc->reserved_E0_0 = 0; + tc->app_tag_gen_mask = 0; + + /** setup block guard control **/ + tc->bgctl = 0; + + /* DIF read strip */ + tc->bgctl_f.crc_verify = 1; + tc->bgctl_f.op = 0x1; + if ((type & SCSI_PROT_DIF_TYPE1) || (type & SCSI_PROT_DIF_TYPE2)) { + tc->bgctl_f.ref_tag_chk = 1; + tc->bgctl_f.app_f_detect = 1; + } else if (type & SCSI_PROT_DIF_TYPE3) + tc->bgctl_f.app_ref_f_detect = 1; + + tc->app_tag_verify_mask = 0; + + /* must init to 0 for hw */ + tc->blk_guard_err = 0; + + tc->reserved_E8_0 = 0; + tc->ref_tag_seed_gen = 0; +} + /** * This method is will fill in the SCU Task Context for a SSP IO request. * @sci_req: @@ -274,6 +410,10 @@ static void scu_ssp_io_request_construct_task_context(struct isci_request *ireq, u32 len) { struct scu_task_context *task_context = ireq->tc; + struct sas_task *sas_task = ireq->ttype_ptr.io_task_ptr; + struct scsi_cmnd *scmd = sas_task->uldd_task; + u8 prot_type = scsi_get_prot_type(scmd); + u8 prot_op = scsi_get_prot_op(scmd); scu_ssp_reqeust_construct_task_context(ireq, task_context); @@ -296,6 +436,13 @@ static void scu_ssp_io_request_construct_task_context(struct isci_request *ireq, if (task_context->transfer_length_bytes > 0) sci_request_build_sgl(ireq); + + if (prot_type != SCSI_PROT_DIF_TYPE0) { + if (prot_op == SCSI_PROT_READ_STRIP) + scu_ssp_ireq_dif_strip(ireq, prot_type, prot_op); + else if (prot_op == SCSI_PROT_WRITE_INSERT) + scu_ssp_ireq_dif_insert(ireq, prot_type, prot_op); + } } /** diff --git a/drivers/scsi/isci/scu_task_context.h b/drivers/scsi/isci/scu_task_context.h index 7df87d92328..869a979eb5b 100644 --- a/drivers/scsi/isci/scu_task_context.h +++ b/drivers/scsi/isci/scu_task_context.h @@ -866,9 +866,9 @@ struct scu_task_context { struct transport_snapshot snapshot; /* read only set to 0 */ /* OFFSET 0x5C */ - u32 block_protection_enable:1; - u32 block_size:2; - u32 block_protection_function:2; + u32 blk_prot_en:1; + u32 blk_sz:2; + u32 blk_prot_func:2; u32 reserved_5C_0:9; u32 active_sgl_element:2; /* read only set to 0 */ u32 sgl_exhausted:1; /* read only set to 0 */ @@ -896,33 +896,56 @@ struct scu_task_context { u32 reserved_C4_CC[3]; /* OFFSET 0xD0 */ - u32 intermediate_crc_value:16; - u32 initial_crc_seed:16; + u32 interm_crc_val:16; + u32 init_crc_seed:16; /* OFFSET 0xD4 */ - u32 application_tag_for_verify:16; - u32 application_tag_for_generate:16; + u32 app_tag_verify:16; + u32 app_tag_gen:16; /* OFFSET 0xD8 */ - u32 reference_tag_seed_for_verify_function; + u32 ref_tag_seed_verify; /* OFFSET 0xDC */ - u32 reserved_DC; + u32 UD_bytes_immed_val:13; + u32 reserved_DC_0:3; + u32 DIF_bytes_immed_val:4; + u32 reserved_DC_1:12; /* OFFSET 0xE0 */ - u32 reserved_E0_0:16; - u32 application_tag_mask_for_generate:16; + u32 bgc_blk_sz:13; + u32 reserved_E0_0:3; + u32 app_tag_gen_mask:16; /* OFFSET 0xE4 */ - u32 block_protection_control:16; - u32 application_tag_mask_for_verify:16; + union { + u16 bgctl; + struct { + u16 crc_verify:1; + u16 app_tag_chk:1; + u16 ref_tag_chk:1; + u16 op:2; + u16 legacy:1; + u16 invert_crc_seed:1; + u16 ref_tag_gen:1; + u16 fixed_ref_tag:1; + u16 invert_crc:1; + u16 app_ref_f_detect:1; + u16 uninit_dif_check_err:1; + u16 uninit_dif_bypass:1; + u16 app_f_detect:1; + u16 reserved_0:2; + } bgctl_f; + }; + + u16 app_tag_verify_mask; /* OFFSET 0xE8 */ - u32 block_protection_error:8; + u32 blk_guard_err:8; u32 reserved_E8_0:24; /* OFFSET 0xEC */ - u32 reference_tag_seed_for_verify; + u32 ref_tag_seed_gen; /* OFFSET 0xF0 */ u32 intermediate_crc_valid_snapshot:16; @@ -937,6 +960,6 @@ struct scu_task_context { /* OFFSET 0xFC */ u32 reference_tag_seed_for_generate_function_snapshot; -}; +} __packed; #endif /* _SCU_TASK_CONTEXT_H_ */ -- cgit v1.2.3-70-g09d2 From b99fbf6a4e96ecacadf0f4868942774e0d64a648 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 10 Feb 2012 17:17:59 -0800 Subject: [SCSI] libfcoe: Don't KERN_ERR on netdev notification This is more of a debug statement. As a KERN_ERR we generate log entries anytime any netdev goes up or down, so when booting there are notification log entries for all system interfaces including 'lo'. This is too much. Let's just log when necessary. Signed-off-by: Robert Love Tested-by: Ross Brattain Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe_transport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe_transport.c b/drivers/scsi/fcoe/fcoe_transport.c index bd97b2273f2..0897be0ad7b 100644 --- a/drivers/scsi/fcoe/fcoe_transport.c +++ b/drivers/scsi/fcoe/fcoe_transport.c @@ -620,8 +620,8 @@ static int libfcoe_device_notification(struct notifier_block *notifier, switch (event) { case NETDEV_UNREGISTER: - printk(KERN_ERR "libfcoe_device_notification: NETDEV_UNREGISTER %s\n", - netdev->name); + LIBFCOE_TRANSPORT_DBG("NETDEV_UNREGISTER %s\n", + netdev->name); fcoe_del_netdev_mapping(netdev); break; } -- cgit v1.2.3-70-g09d2 From 7e5adcfb31c26a68b75a249ef1c7f52fc5ec6e1b Mon Sep 17 00:00:00 2001 From: Neerav Parikh Date: Fri, 10 Feb 2012 17:18:31 -0800 Subject: [SCSI] fcoe: Allow exposing FDMI attributes via sysfs Allow FDMI attributes to be exposed via the fc_host class object for the fcoe driver. Signed-off-by: Neerav Parikh Tested-by: Ross Brattain Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 5e77f23423d..67f6685de7f 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -216,6 +216,14 @@ static struct fc_function_template fcoe_vport_fc_functions = { .show_host_supported_fc4s = 1, .show_host_active_fc4s = 1, .show_host_maxframe_size = 1, + .show_host_serial_number = 1, + .show_host_manufacturer = 1, + .show_host_model = 1, + .show_host_model_description = 1, + .show_host_hardware_version = 1, + .show_host_driver_version = 1, + .show_host_firmware_version = 1, + .show_host_optionrom_version = 1, .show_host_port_id = 1, .show_host_supported_speeds = 1, -- cgit v1.2.3-70-g09d2 From 6f68794c9283bbce3f7c91d3be34cb4f4f6ed960 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 10 Feb 2012 17:18:36 -0800 Subject: [SCSI] fcoe: Rename out_nomod label to out_putmod The label implies that it should be called when there is 'nomod.' I read that to mean that the module reference 'get' failed. However, it's only called when the module reference 'get' succeeded. I think it makes more sense to name the label, 'out_putmod' since it should be called when we need to 'put' the module reference taken in the routine before returning. Signed-off-by: Robert Love Tested-by: Ross Brattain Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 67f6685de7f..449d31ea07b 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -380,7 +380,7 @@ static struct fcoe_interface *fcoe_interface_create(struct net_device *netdev, if (!fcoe) { FCOE_NETDEV_DBG(netdev, "Could not allocate fcoe structure\n"); fcoe = ERR_PTR(-ENOMEM); - goto out_nomod; + goto out_putmod; } dev_hold(netdev); @@ -400,12 +400,12 @@ static struct fcoe_interface *fcoe_interface_create(struct net_device *netdev, kfree(fcoe); dev_put(netdev); fcoe = ERR_PTR(err); - goto out_nomod; + goto out_putmod; } goto out; -out_nomod: +out_putmod: module_put(THIS_MODULE); out: return fcoe; -- cgit v1.2.3-70-g09d2 From ccefd23ed2d683ad3c0282280e6e6d0b163ad041 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 10 Feb 2012 17:18:41 -0800 Subject: [SCSI] fcoe: Do not switch context in vport_delete callback Currently all port deletion is routed though the FCoE workqueue (fcoe_wq). When fc_remove_host is called on an N_Port (for example, from fcoe_destroy) the vports are queued into a FC Transport workqueue. fc_remove_host flushes that queue and each vport is passed to fcoe's fcoe_vport_destroy, which simply queues the associated fcoe_ports for later deletion. This queue cannot be flushed within the N_Ports destroy path because of circular locking issues. The result is that the NPIV ports are destroyed after the N_Port, which is reverse of how they are created. This quirk causes fcoe to keep references on the fcoe_interface shared by each of these ports (N_Port and NPIV). Changing the ordering such that NPIV ports are destroyed before the N_Port will allow us to remove reference counting on the fcoe_interface instances. This patch simply allows fcoe_vport_destory to destroy NPIV ports without deferring them to a workqueue context. This ensures that when fc_remove_host is called the NPIV ports will be destroyed first before the N_Port and allows reference counting on the fcoe's fcoe_interface to be remove in a later patch. Signed-off-by: Robert Love Tested-by: Ross Brattain Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 449d31ea07b..5126685ab98 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -2107,20 +2107,14 @@ static void fcoe_destroy_work(struct work_struct *work) { struct fcoe_port *port; struct fcoe_interface *fcoe; - int npiv = 0; port = container_of(work, struct fcoe_port, destroy_work); mutex_lock(&fcoe_config_mutex); - /* set if this is an NPIV port */ - npiv = port->lport->vport ? 1 : 0; - fcoe = port->priv; fcoe_if_destroy(port->lport); - /* Do not tear down the fcoe interface for NPIV port */ - if (!npiv) - fcoe_interface_cleanup(fcoe); + fcoe_interface_cleanup(fcoe); mutex_unlock(&fcoe_config_mutex); } @@ -2691,12 +2685,15 @@ static int fcoe_vport_destroy(struct fc_vport *vport) struct Scsi_Host *shost = vport_to_shost(vport); struct fc_lport *n_port = shost_priv(shost); struct fc_lport *vn_port = vport->dd_data; - struct fcoe_port *port = lport_priv(vn_port); mutex_lock(&n_port->lp_mutex); list_del(&vn_port->list); mutex_unlock(&n_port->lp_mutex); - queue_work(fcoe_wq, &port->destroy_work); + + mutex_lock(&fcoe_config_mutex); + fcoe_if_destroy(vn_port); + mutex_unlock(&fcoe_config_mutex); + return 0; } -- cgit v1.2.3-70-g09d2 From 1a8ef414d97bf3f293e286f02002f8db768f9867 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Fri, 10 Feb 2012 17:18:46 -0800 Subject: [SCSI] fcoe: Remove reference counting on 'stuct fcoe_interface' The reference counting was necessary on these instances because it was possible for NPIV ports to be destroyed after the N_Port. A previous patch ensures that all NPIV ports are destroyed before the N_Port making the need to track references on the interface unnecessary. Signed-off-by: Robert Love Tested-by: Ross Brattain Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 48 +++++------------------------------------------- drivers/scsi/fcoe/fcoe.h | 3 --- 2 files changed, 5 insertions(+), 46 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 5126685ab98..278958157e2 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -384,7 +384,6 @@ static struct fcoe_interface *fcoe_interface_create(struct net_device *netdev, } dev_hold(netdev); - kref_init(&fcoe->kref); /* * Initialize FIP. @@ -411,42 +410,6 @@ out: return fcoe; } -/** - * fcoe_interface_release() - fcoe_port kref release function - * @kref: Embedded reference count in an fcoe_interface struct - */ -static void fcoe_interface_release(struct kref *kref) -{ - struct fcoe_interface *fcoe; - struct net_device *netdev; - - fcoe = container_of(kref, struct fcoe_interface, kref); - netdev = fcoe->netdev; - /* tear-down the FCoE controller */ - fcoe_ctlr_destroy(&fcoe->ctlr); - kfree(fcoe); - dev_put(netdev); - module_put(THIS_MODULE); -} - -/** - * fcoe_interface_get() - Get a reference to a FCoE interface - * @fcoe: The FCoE interface to be held - */ -static inline void fcoe_interface_get(struct fcoe_interface *fcoe) -{ - kref_get(&fcoe->kref); -} - -/** - * fcoe_interface_put() - Put a reference to a FCoE interface - * @fcoe: The FCoE interface to be released - */ -static inline void fcoe_interface_put(struct fcoe_interface *fcoe) -{ - kref_put(&fcoe->kref, fcoe_interface_release); -} - /** * fcoe_interface_cleanup() - Clean up a FCoE interface * @fcoe: The FCoE interface to be cleaned up @@ -494,7 +457,11 @@ static void fcoe_interface_cleanup(struct fcoe_interface *fcoe) rtnl_unlock(); /* Release the self-reference taken during fcoe_interface_create() */ - fcoe_interface_put(fcoe); + /* tear-down the FCoE controller */ + fcoe_ctlr_destroy(fip); + kfree(fcoe); + dev_put(netdev); + module_put(THIS_MODULE); } /** @@ -976,9 +943,6 @@ static void fcoe_if_destroy(struct fc_lport *lport) dev_uc_del(netdev, port->data_src_addr); rtnl_unlock(); - /* Release reference held in fcoe_if_create() */ - fcoe_interface_put(fcoe); - /* Free queued packets for the per-CPU receive threads */ fcoe_percpu_clean(lport); @@ -1168,7 +1132,6 @@ static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe, goto out_lp_destroy; } - fcoe_interface_get(fcoe); return lport; out_lp_destroy: @@ -2113,7 +2076,6 @@ static void fcoe_destroy_work(struct work_struct *work) fcoe = port->priv; fcoe_if_destroy(port->lport); - fcoe_interface_cleanup(fcoe); mutex_unlock(&fcoe_config_mutex); diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h index bcc89e63949..3c2733a12aa 100644 --- a/drivers/scsi/fcoe/fcoe.h +++ b/drivers/scsi/fcoe/fcoe.h @@ -71,8 +71,6 @@ do { \ * @ctlr: The FCoE controller (for FIP) * @oem: The offload exchange manager for all local port * instances associated with this port - * @kref: The kernel reference - * * This structure is 1:1 with a net devive. */ struct fcoe_interface { @@ -83,7 +81,6 @@ struct fcoe_interface { struct packet_type fip_packet_type; struct fcoe_ctlr ctlr; struct fc_exch_mgr *oem; - struct kref kref; }; #define fcoe_from_ctlr(fip) container_of(fip, struct fcoe_interface, ctlr) -- cgit v1.2.3-70-g09d2 From d4042e9c84864a5666dc8ec14b3c1a5597b6a73f Mon Sep 17 00:00:00 2001 From: Bhanu Prakash Gollapudi Date: Fri, 10 Feb 2012 17:18:51 -0800 Subject: [SCSI] libfc: Fix panic in fc_exch_recv Adding and removing the host into the zone causes this panic. BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 IP: [] fc_exch_recv+0xc57/0xe70 [libfc] Call Trace: [] bnx2fc_l2_rcv_thread+0x37b/0x430 [bnx2fc] [] ? bnx2fc_l2_rcv_thread+0x0/0x430 [bnx2fc] [] kthread+0x96/0xa0 [] child_rip+0xa/0x20 [] ? kthread+0x0/0xa0 [] ? child_rip+0x0/0x20 During fc_exch_reset, the active exchanges are aborted and the exch is deleted. As part of processing ABTS response, due to 'ep' being NULL, any access to ep in fc_exch_recv_bls() causes this panic. Fixed to access 'ep' only if non-NULL. Reviewed-by: Neerav Parikh Signed-off-by: Bhanu Prakash Gollapudi Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 4d70d96fa5d..630291f0182 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1642,9 +1642,10 @@ static void fc_exch_recv_bls(struct fc_exch_mgr *mp, struct fc_frame *fp) case FC_RCTL_ACK_0: break; default: - FC_EXCH_DBG(ep, "BLS rctl %x - %s received", - fh->fh_r_ctl, - fc_exch_rctl_name(fh->fh_r_ctl)); + if (ep) + FC_EXCH_DBG(ep, "BLS rctl %x - %s received", + fh->fh_r_ctl, + fc_exch_rctl_name(fh->fh_r_ctl)); break; } fc_frame_free(fp); -- cgit v1.2.3-70-g09d2 From 0083208473d3d9a87dcdffaf36a2dbe718dfe282 Mon Sep 17 00:00:00 2001 From: Bhanu Prakash Gollapudi Date: Fri, 10 Feb 2012 17:18:57 -0800 Subject: [SCSI] libfc: Handle discovery failure during ctlr link down While we wait for GPN_FT response, if the ctlr link goes down, the stack generates a completion for GPN_FT with error FC_EXCH_CLOSED, and reports a discovery error. Discovery is not retried in this case, and rightly so. However, the 'pending' flag stays set, which does not allow subsequent discovery to succeed as GPN_FT will never be issued. Fix it by clearing the pending flag when the discovery fails due to GPN_FT failure. Signed-off-by: Bhanu Prakash Gollapudi Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_disc.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 1d1b0c9da29..8e561e6a557 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -337,6 +337,13 @@ static void fc_disc_error(struct fc_disc *disc, struct fc_frame *fp) schedule_delayed_work(&disc->disc_work, delay); } else fc_disc_done(disc, DISC_EV_FAILED); + } else if (PTR_ERR(fp) == -FC_EX_CLOSED) { + /* + * if discovery fails due to lport reset, clear + * pending flag so that subsequent discovery can + * continue + */ + disc->pending = 0; } } -- cgit v1.2.3-70-g09d2 From 45857216f2a513872efc965f66bca21ace0980fd Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Mon, 13 Feb 2012 18:30:40 +0530 Subject: [SCSI] qla4xxx: Remove unused code This code initially added for FW debugging, we don't need this code now so taking it out. Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_nx.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c index 78f1111158d..225e921c319 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.c +++ b/drivers/scsi/qla4xxx/ql4_nx.c @@ -1015,18 +1015,6 @@ qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose) else qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xffffffff); - /* reset ms */ - val = qla4_8xxx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4); - val |= (1 << 1); - qla4_8xxx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val); - - msleep(20); - /* unreset ms */ - val = qla4_8xxx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4); - val &= ~(1 << 1); - qla4_8xxx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val); - msleep(20); - qla4_8xxx_rom_unlock(ha); /* Read the signature value from the flash. -- cgit v1.2.3-70-g09d2 From 981c982c2d739940d36ab535047a471943787c93 Mon Sep 17 00:00:00 2001 From: Lalit Chandivade Date: Mon, 13 Feb 2012 18:30:41 +0530 Subject: [SCSI] qla4xxx: Fix un-necessary delay on invalid DDB Fix the un-necessary wait for completion of a sendtarget on an invalid DDB entry. The state of an invalid DDB entry is 0 (unassigned) This will also avoid the delays during system boot. Signed-off-by: Lalit Chandivade Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_mbx.c | 2 ++ drivers/scsi/qla4xxx/ql4_os.c | 4 ++++ 2 files changed, 6 insertions(+) diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index e1e66a45e4d..eaf21852887 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -661,6 +661,8 @@ int qla4xxx_get_fwddb_entry(struct scsi_qla_host *ha, } memset(&mbox_cmd, 0, sizeof(mbox_cmd)); memset(&mbox_sts, 0, sizeof(mbox_sts)); + if (fw_ddb_entry) + memset(fw_ddb_entry, 0, sizeof(struct dev_db_entry)); mbox_cmd[0] = MBOX_CMD_GET_DATABASE_ENTRY; mbox_cmd[1] = (uint32_t) fw_ddb_index; diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index c1189e5fab1..089443add47 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -4090,6 +4090,10 @@ static void qla4xxx_build_st_list(struct scsi_qla_host *ha, if (ret == QLA_ERROR) break; + /* Ignore DDB if invalid state (unassigned) */ + if (state == DDB_DS_UNASSIGNED) + goto continue_next_st; + /* Check if ST, add to the list_st */ if (strlen((char *) fw_ddb_entry->iscsi_name) != 0) goto continue_next_st; -- cgit v1.2.3-70-g09d2 From 20e835b43f3f81e29f34e06099a47285ffebe688 Mon Sep 17 00:00:00 2001 From: Lalit Chandivade Date: Mon, 13 Feb 2012 18:30:42 +0530 Subject: [SCSI] qla4xxx: Fix verify boot idx correctly qla4xxx_verify_boot_idx can falsely report a DDB to be boot target if ha->pri_ddb_idx and ha->sec_ddb_idx are not initialized correctly. What this could cause is if there is DDB entry in FLash at index 0, then qla4xxx_verify_boot_idx would return wrong result as ha->pri_ddb_idx is not set correctly. Fixed the qla4xxx_get_boot_info to set the ha->pri_ddb_idx and ha->sec_ddb_idx correctly. Signed-off-by: Lalit Chandivade Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_os.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 089443add47..a9ff05e24f3 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -3463,12 +3463,11 @@ static int get_fw_boot_info(struct scsi_qla_host *ha, uint16_t ddb_index[]) " target ID %d\n", __func__, ddb_index[0], ddb_index[1])); - ha->pri_ddb_idx = ddb_index[0]; - ha->sec_ddb_idx = ddb_index[1]; - exit_boot_info_free: dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma); exit_boot_info: + ha->pri_ddb_idx = ddb_index[0]; + ha->sec_ddb_idx = ddb_index[1]; return ret; } -- cgit v1.2.3-70-g09d2 From e8fb00e068e057ad2fc28fd0d398ff028bc540ff Mon Sep 17 00:00:00 2001 From: Manish Rangankar Date: Mon, 13 Feb 2012 18:30:43 +0530 Subject: [SCSI] qla4xxx: Modified debug log messages for boot info. In some configurations user may not have boot targets configured. In such cases the debug messages printed out by driver look like some kind of failure happening. However this could be a valid case, so modified the messages to appear as warning messages versus failure messages. Signed-off-by: Manish Rangankar Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_os.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index a9ff05e24f3..3339cc1e339 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -3393,9 +3393,8 @@ static int get_fw_boot_info(struct scsi_qla_host *ha, uint16_t ddb_index[]) /* Check Boot Mode */ val = rd_nvram_byte(ha, addr); if (!(val & 0x07)) { - DEBUG2(ql4_printk(KERN_ERR, ha, - "%s: Failed Boot options : 0x%x\n", - __func__, val)); + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Adapter boot " + "options : 0x%x\n", __func__, val)); ret = QLA_ERROR; goto exit_boot_info; } @@ -3440,9 +3439,8 @@ static int get_fw_boot_info(struct scsi_qla_host *ha, uint16_t ddb_index[]) } /* Check Boot Mode */ if (!(buf[1] & 0x07)) { - DEBUG2(ql4_printk(KERN_INFO, ha, - "Failed: Boot options : 0x%x\n", - buf[1])); + DEBUG2(ql4_printk(KERN_INFO, ha, "Firmware boot options" + " : 0x%x\n", buf[1])); ret = QLA_ERROR; goto exit_boot_info_free; } @@ -3548,8 +3546,8 @@ static int qla4xxx_get_boot_target(struct scsi_qla_host *ha, if (qla4xxx_bootdb_by_index(ha, fw_ddb_entry, fw_ddb_entry_dma, ddb_index)) { - DEBUG2(ql4_printk(KERN_ERR, ha, - "%s: Flash DDB read Failed\n", __func__)); + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: No Flash DDB found at " + "index [%d]\n", __func__, ddb_index)); ret = QLA_ERROR; goto exit_boot_target; } @@ -3627,8 +3625,8 @@ static int qla4xxx_get_boot_info(struct scsi_qla_host *ha) ddb_index[1] = 0xffff; ret = get_fw_boot_info(ha, ddb_index); if (ret != QLA_SUCCESS) { - DEBUG2(ql4_printk(KERN_ERR, ha, - "%s: Failed to set boot info.\n", __func__)); + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s: No boot target configured.\n", __func__)); return ret; } @@ -3641,8 +3639,8 @@ static int qla4xxx_get_boot_info(struct scsi_qla_host *ha) rval = qla4xxx_get_boot_target(ha, &(ha->boot_tgt.boot_pri_sess), ddb_index[0]); if (rval != QLA_SUCCESS) { - DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Failed to get " - "primary target\n", __func__)); + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Primary boot target not " + "configured\n", __func__)); } else ret = QLA_SUCCESS; @@ -3653,8 +3651,8 @@ sec_target: rval = qla4xxx_get_boot_target(ha, &(ha->boot_tgt.boot_sec_sess), ddb_index[1]); if (rval != QLA_SUCCESS) { - DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Failed to get " - "secondary target\n", __func__)); + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Secondary boot target not" + " configured\n", __func__)); } else ret = QLA_SUCCESS; -- cgit v1.2.3-70-g09d2 From badc5b9996005a388e94223d43eebba6698b7ac4 Mon Sep 17 00:00:00 2001 From: Lalit Chandivade Date: Mon, 13 Feb 2012 18:30:44 +0530 Subject: [SCSI] qla4xxx: Remove un-necessary print statment On ROM lock acquiring timeout failure, driver spews lot of warning messages in a for loop, remove the unwanted warning message to reduce kernel messages clutter. Signed-off-by: Lalit Chandivade Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_nx.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c index 225e921c319..af8dcf605a2 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.c +++ b/drivers/scsi/qla4xxx/ql4_nx.c @@ -860,11 +860,8 @@ qla4_8xxx_rom_lock(struct scsi_qla_host *ha) done = qla4_8xxx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_LOCK)); if (done == 1) break; - if (timeout >= qla4_8xxx_rom_lock_timeout) { - ql4_printk(KERN_WARNING, ha, - "%s: Failed to acquire rom lock", __func__); + if (timeout >= qla4_8xxx_rom_lock_timeout) return -1; - } timeout++; -- cgit v1.2.3-70-g09d2 From 46801ba698b3366cf8d293d9f3d4253b6fd5210b Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Mon, 13 Feb 2012 18:30:45 +0530 Subject: [SCSI] qla4xxx: Proper detection of firmware abort error code for ISP82xx Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_def.h | 2 -- drivers/scsi/qla4xxx/ql4_nx.h | 1 + drivers/scsi/qla4xxx/ql4_os.c | 2 +- 3 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index bfe68545203..ec48dc30b9a 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -150,8 +150,6 @@ #define QL4_SESS_RECOVERY_TMO 120 /* iSCSI session */ /* recovery timeout */ -#define MSB(x) ((uint8_t)((uint16_t)(x) >> 8)) -#define LSW(x) ((uint16_t)(x)) #define LSDW(x) ((u32)((u64)(x))) #define MSDW(x) ((u32)((((u64)(x)) >> 16) >> 16)) diff --git a/drivers/scsi/qla4xxx/ql4_nx.h b/drivers/scsi/qla4xxx/ql4_nx.h index dc45ac92369..dc7500e47b8 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.h +++ b/drivers/scsi/qla4xxx/ql4_nx.h @@ -623,6 +623,7 @@ struct crb_addr_pair { #define ADDR_ERROR ((unsigned long) 0xffffffff) #define MAX_CTL_CHECK 1000 +#define QLA82XX_FWERROR_CODE(code) ((code >> 8) & 0x1fffff) /*************************************************************************** * PCI related defines. diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 3339cc1e339..2cd20775836 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -2165,7 +2165,7 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha) halt_status = qla4_8xxx_rd_32(ha, QLA82XX_PEG_HALT_STATUS1); - if (LSW(MSB(halt_status)) == 0x67) + if (QLA82XX_FWERROR_CODE(halt_status) == 0x67) ql4_printk(KERN_ERR, ha, "%s:" " Firmware aborted with" " error code 0x00006700." -- cgit v1.2.3-70-g09d2 From a11e25459558421ec5c4adc3fc46fe320ab74bd3 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Mon, 13 Feb 2012 18:30:46 +0530 Subject: [SCSI] scsi_transport_iscsi: added support for host event Added support to post kernel host event to application using netlink interface. Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_iscsi.c | 31 +++++++++++++++++++++++++++++++ include/scsi/iscsi_if.h | 13 +++++++++++++ include/scsi/scsi_transport_iscsi.h | 6 ++++++ 3 files changed, 50 insertions(+) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 787044828a7..38f0bf8ea91 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -1476,6 +1476,37 @@ void iscsi_conn_login_event(struct iscsi_cls_conn *conn, } EXPORT_SYMBOL_GPL(iscsi_conn_login_event); +void iscsi_post_host_event(uint32_t host_no, struct iscsi_transport *transport, + enum iscsi_host_event_code code, uint32_t data_size, + uint8_t *data) +{ + struct nlmsghdr *nlh; + struct sk_buff *skb; + struct iscsi_uevent *ev; + int len = NLMSG_SPACE(sizeof(*ev) + data_size); + + skb = alloc_skb(len, GFP_KERNEL); + if (!skb) { + printk(KERN_ERR "gracefully ignored host event (%d):%d OOM\n", + host_no, code); + return; + } + + nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0); + ev = NLMSG_DATA(nlh); + ev->transport_handle = iscsi_handle(transport); + ev->type = ISCSI_KEVENT_HOST_EVENT; + ev->r.host_event.host_no = host_no; + ev->r.host_event.code = code; + ev->r.host_event.data_size = data_size; + + if (data_size) + memcpy((char *)ev + sizeof(*ev), data, data_size); + + iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_KERNEL); +} +EXPORT_SYMBOL_GPL(iscsi_post_host_event); + static int iscsi_if_send_reply(uint32_t group, int seq, int type, int done, int multi, void *payload, int size) diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index e49b7c8dd21..3aac99155e8 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -72,6 +72,7 @@ enum iscsi_uevent_e { ISCSI_KEVENT_PATH_REQ = KEVENT_BASE + 7, ISCSI_KEVENT_IF_DOWN = KEVENT_BASE + 8, ISCSI_KEVENT_CONN_LOGIN_STATE = KEVENT_BASE + 9, + ISCSI_KEVENT_HOST_EVENT = KEVENT_BASE + 10, }; enum iscsi_tgt_dscvr { @@ -80,6 +81,13 @@ enum iscsi_tgt_dscvr { ISCSI_TGT_DSCVR_SLP = 3, }; +enum iscsi_host_event_code { + ISCSI_EVENT_LINKUP = 1, + ISCSI_EVENT_LINKDOWN, + /* must always be last */ + ISCSI_EVENT_MAX, +}; + struct iscsi_uevent { uint32_t type; /* k/u events type */ uint32_t iferror; /* carries interface or resource errors */ @@ -222,6 +230,11 @@ struct iscsi_uevent { struct msg_notify_if_down { uint32_t host_no; } notify_if_down; + struct msg_host_event { + uint32_t host_no; + uint32_t data_size; + enum iscsi_host_event_code code; + } host_event; } r; } __attribute__ ((aligned (sizeof(uint64_t)))); diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index fa7ca4e1602..7f047314281 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -166,6 +166,12 @@ extern int iscsi_offload_mesg(struct Scsi_Host *shost, struct iscsi_transport *transport, uint32_t type, char *data, uint16_t data_size); +extern void iscsi_post_host_event(uint32_t host_no, + struct iscsi_transport *transport, + enum iscsi_host_event_code code, + uint32_t data_size, + uint8_t *data); + struct iscsi_cls_conn { struct list_head conn_list; /* item in connlist */ void *dd_data; /* LLD private data */ -- cgit v1.2.3-70-g09d2 From ff884430801c08bd909fd95f6cb1a0446afd30db Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Mon, 29 Aug 2011 23:43:02 +0530 Subject: [SCSI] qla4xxx: added support for host event Added support to post kernel host event to application using netlink interface. Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_def.h | 18 +++++++++ drivers/scsi/qla4xxx/ql4_glbl.h | 2 + drivers/scsi/qla4xxx/ql4_isr.c | 6 +++ drivers/scsi/qla4xxx/ql4_os.c | 85 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 111 insertions(+) diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index ec48dc30b9a..f91808ce572 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -301,7 +301,21 @@ struct ql4_tuple_ddb { #define DF_ISNS_DISCOVERED 2 /* Device was discovered via iSNS */ #define DF_FO_MASKED 3 +enum qla4_work_type { + QLA4_EVENT_AEN, +}; +struct qla4_work_evt { + struct list_head list; + enum qla4_work_type type; + union { + struct { + enum iscsi_host_event_code code; + uint32_t data_size; + uint8_t data[0]; + } aen; + } u; +}; struct ql82xx_hw_data { /* Offsets for flash/nvram access (set to ~0 if not used). */ @@ -672,6 +686,10 @@ struct scsi_qla_host { uint16_t sec_ddb_idx; int is_reset; uint16_t temperature; + + /* event work list */ + struct list_head work_list; + spinlock_t work_lock; }; struct ql4_task_data { diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h index d0dd4b33020..34cf851978e 100644 --- a/drivers/scsi/qla4xxx/ql4_glbl.h +++ b/drivers/scsi/qla4xxx/ql4_glbl.h @@ -181,6 +181,8 @@ int qla4xxx_flash_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index, int qla4xxx_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index, struct ddb_entry *ddb_entry, uint32_t state); void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset); +int qla4xxx_post_aen_work(struct scsi_qla_host *ha, uint32_t aen_code, + uint32_t data_size, uint8_t *data); /* BSG Functions */ int qla4xxx_bsg_request(struct bsg_job *bsg_job); diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index 95828862eea..954fe84be57 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -576,6 +576,9 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, set_bit(DPC_LINK_CHANGED, &ha->dpc_flags); ql4_printk(KERN_INFO, ha, "%s: LINK UP\n", __func__); + qla4xxx_post_aen_work(ha, ISCSI_EVENT_LINKUP, + sizeof(mbox_sts), + (uint8_t *) mbox_sts); break; case MBOX_ASTS_LINK_DOWN: @@ -584,6 +587,9 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, set_bit(DPC_LINK_CHANGED, &ha->dpc_flags); ql4_printk(KERN_INFO, ha, "%s: LINK DOWN\n", __func__); + qla4xxx_post_aen_work(ha, ISCSI_EVENT_LINKDOWN, + sizeof(mbox_sts), + (uint8_t *) mbox_sts); break; case MBOX_ASTS_HEARTBEAT: diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 2cd20775836..d423f7afbbd 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -2282,6 +2282,10 @@ static void qla4xxx_timer(struct scsi_qla_host *ha) } } + /* Process any deferred work. */ + if (!list_empty(&ha->work_list)) + start_dpc++; + /* Wakeup the dpc routine for this adapter, if needed. */ if (start_dpc || test_bit(DPC_RESET_HA, &ha->dpc_flags) || @@ -2847,6 +2851,81 @@ void qla4xxx_wake_dpc(struct scsi_qla_host *ha) queue_work(ha->dpc_thread, &ha->dpc_work); } +static struct qla4_work_evt * +qla4xxx_alloc_work(struct scsi_qla_host *ha, uint32_t data_size, + enum qla4_work_type type) +{ + struct qla4_work_evt *e; + uint32_t size = sizeof(struct qla4_work_evt) + data_size; + + e = kzalloc(size, GFP_ATOMIC); + if (!e) + return NULL; + + INIT_LIST_HEAD(&e->list); + e->type = type; + return e; +} + +static void qla4xxx_post_work(struct scsi_qla_host *ha, + struct qla4_work_evt *e) +{ + unsigned long flags; + + spin_lock_irqsave(&ha->work_lock, flags); + list_add_tail(&e->list, &ha->work_list); + spin_unlock_irqrestore(&ha->work_lock, flags); + qla4xxx_wake_dpc(ha); +} + +int qla4xxx_post_aen_work(struct scsi_qla_host *ha, + enum iscsi_host_event_code aen_code, + uint32_t data_size, uint8_t *data) +{ + struct qla4_work_evt *e; + + e = qla4xxx_alloc_work(ha, data_size, QLA4_EVENT_AEN); + if (!e) + return QLA_ERROR; + + e->u.aen.code = aen_code; + e->u.aen.data_size = data_size; + memcpy(e->u.aen.data, data, data_size); + + qla4xxx_post_work(ha, e); + + return QLA_SUCCESS; +} + +void qla4xxx_do_work(struct scsi_qla_host *ha) +{ + struct qla4_work_evt *e, *tmp; + unsigned long flags; + LIST_HEAD(work); + + spin_lock_irqsave(&ha->work_lock, flags); + list_splice_init(&ha->work_list, &work); + spin_unlock_irqrestore(&ha->work_lock, flags); + + list_for_each_entry_safe(e, tmp, &work, list) { + list_del_init(&e->list); + + switch (e->type) { + case QLA4_EVENT_AEN: + iscsi_post_host_event(ha->host_no, + &qla4xxx_iscsi_transport, + e->u.aen.code, + e->u.aen.data_size, + e->u.aen.data); + break; + default: + ql4_printk(KERN_WARNING, ha, "event type: 0x%x not " + "supported", e->type); + } + kfree(e); + } +} + /** * qla4xxx_do_dpc - dpc routine * @data: in our case pointer to adapter structure @@ -2878,6 +2957,9 @@ static void qla4xxx_do_dpc(struct work_struct *work) return; } + /* post events to application */ + qla4xxx_do_work(ha); + if (is_qla8022(ha)) { if (test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags)) { qla4_8xxx_idc_lock(ha); @@ -4450,6 +4532,9 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, spin_lock_init(&ha->hardware_lock); + /* Initialize work list */ + INIT_LIST_HEAD(&ha->work_list); + /* Allocate dma buffers */ if (qla4xxx_mem_alloc(ha)) { ql4_printk(KERN_WARNING, ha, -- cgit v1.2.3-70-g09d2 From ac20c7bf070df2b0feb410558ec4d75dbe59b701 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Mon, 13 Feb 2012 18:30:48 +0530 Subject: [SCSI] iscsi_transport: Added Ping support Added ping support for iscsi adapter, application can use this interface for diagnostic network connection. Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_iscsi.c | 59 +++++++++++++++++++++++++++++++++++++ include/scsi/iscsi_if.h | 17 +++++++++++ include/scsi/scsi_transport_iscsi.h | 8 +++++ 3 files changed, 84 insertions(+) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 38f0bf8ea91..a20f1813cb5 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -1507,6 +1507,35 @@ void iscsi_post_host_event(uint32_t host_no, struct iscsi_transport *transport, } EXPORT_SYMBOL_GPL(iscsi_post_host_event); +void iscsi_ping_comp_event(uint32_t host_no, struct iscsi_transport *transport, + uint32_t status, uint32_t pid, uint32_t data_size, + uint8_t *data) +{ + struct nlmsghdr *nlh; + struct sk_buff *skb; + struct iscsi_uevent *ev; + int len = NLMSG_SPACE(sizeof(*ev) + data_size); + + skb = alloc_skb(len, GFP_KERNEL); + if (!skb) { + printk(KERN_ERR "gracefully ignored ping comp: OOM\n"); + return; + } + + nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0); + ev = NLMSG_DATA(nlh); + ev->transport_handle = iscsi_handle(transport); + ev->type = ISCSI_KEVENT_PING_COMP; + ev->r.ping_comp.host_no = host_no; + ev->r.ping_comp.status = status; + ev->r.ping_comp.pid = pid; + ev->r.ping_comp.data_size = data_size; + memcpy((char *)ev + sizeof(*ev), data, data_size); + + iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_KERNEL); +} +EXPORT_SYMBOL_GPL(iscsi_ping_comp_event); + static int iscsi_if_send_reply(uint32_t group, int seq, int type, int done, int multi, void *payload, int size) @@ -1945,6 +1974,33 @@ iscsi_set_iface_params(struct iscsi_transport *transport, return err; } +static int +iscsi_send_ping(struct iscsi_transport *transport, struct iscsi_uevent *ev) +{ + struct Scsi_Host *shost; + struct sockaddr *dst_addr; + int err; + + if (!transport->send_ping) + return -ENOSYS; + + shost = scsi_host_lookup(ev->u.iscsi_ping.host_no); + if (!shost) { + printk(KERN_ERR "iscsi_ping could not find host no %u\n", + ev->u.iscsi_ping.host_no); + return -ENODEV; + } + + dst_addr = (struct sockaddr *)((char *)ev + sizeof(*ev)); + err = transport->send_ping(shost, ev->u.iscsi_ping.iface_num, + ev->u.iscsi_ping.iface_type, + ev->u.iscsi_ping.payload_size, + ev->u.iscsi_ping.pid, + dst_addr); + scsi_host_put(shost); + return err; +} + static int iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group) { @@ -2090,6 +2146,9 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group) err = iscsi_set_iface_params(transport, ev, nlmsg_attrlen(nlh, sizeof(*ev))); break; + case ISCSI_UEVENT_PING: + err = iscsi_send_ping(transport, ev); + break; default: err = -ENOSYS; break; diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index 3aac99155e8..7ff9678b7e7 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -60,6 +60,7 @@ enum iscsi_uevent_e { ISCSI_UEVENT_PATH_UPDATE = UEVENT_BASE + 20, ISCSI_UEVENT_SET_IFACE_PARAMS = UEVENT_BASE + 21, + ISCSI_UEVENT_PING = UEVENT_BASE + 22, /* up events */ ISCSI_KEVENT_RECV_PDU = KEVENT_BASE + 1, @@ -73,6 +74,7 @@ enum iscsi_uevent_e { ISCSI_KEVENT_IF_DOWN = KEVENT_BASE + 8, ISCSI_KEVENT_CONN_LOGIN_STATE = KEVENT_BASE + 9, ISCSI_KEVENT_HOST_EVENT = KEVENT_BASE + 10, + ISCSI_KEVENT_PING_COMP = KEVENT_BASE + 11, }; enum iscsi_tgt_dscvr { @@ -186,6 +188,14 @@ struct iscsi_uevent { uint32_t host_no; uint32_t count; } set_iface_params; + struct msg_iscsi_ping { + uint32_t host_no; + uint32_t iface_num; + uint32_t iface_type; + uint32_t payload_size; + uint32_t pid; /* unique ping id associated + with each ping request */ + } iscsi_ping; } u; union { /* messages k -> u */ @@ -235,6 +245,13 @@ struct iscsi_uevent { uint32_t data_size; enum iscsi_host_event_code code; } host_event; + struct msg_ping_comp { + uint32_t host_no; + uint32_t status; + uint32_t pid; /* unique ping id associated + with each ping request */ + uint32_t data_size; + } ping_comp; } r; } __attribute__ ((aligned (sizeof(uint64_t)))); diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index 7f047314281..aede513f99b 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -144,6 +144,9 @@ struct iscsi_transport { int param, char *buf); umode_t (*attr_is_visible)(int param_type, int param); int (*bsg_request)(struct bsg_job *job); + int (*send_ping) (struct Scsi_Host *shost, uint32_t iface_num, + uint32_t iface_type, uint32_t payload_size, + uint32_t pid, struct sockaddr *dst_addr); }; /* @@ -172,6 +175,11 @@ extern void iscsi_post_host_event(uint32_t host_no, uint32_t data_size, uint8_t *data); +extern void iscsi_ping_comp_event(uint32_t host_no, + struct iscsi_transport *transport, + uint32_t status, uint32_t pid, + uint32_t data_size, uint8_t *data); + struct iscsi_cls_conn { struct list_head conn_list; /* item in connlist */ void *dd_data; /* LLD private data */ -- cgit v1.2.3-70-g09d2 From c0b9d3f750520ad3005b99144260e486ef01b5d9 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Mon, 13 Feb 2012 18:30:49 +0530 Subject: [SCSI] qla4xxx: Added ping support Added ping support for network connection diagnostics. Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_def.h | 21 ++++++++ drivers/scsi/qla4xxx/ql4_fw.h | 20 +++++++ drivers/scsi/qla4xxx/ql4_glbl.h | 5 ++ drivers/scsi/qla4xxx/ql4_init.c | 5 ++ drivers/scsi/qla4xxx/ql4_iocb.c | 92 ++++++++++++++++++++++++++++++++ drivers/scsi/qla4xxx/ql4_isr.c | 72 +++++++++++++++++++++++++ drivers/scsi/qla4xxx/ql4_os.c | 113 ++++++++++++++++++++++++++++++++++++++++ 7 files changed, 328 insertions(+) diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index f91808ce572..776714d2d70 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -221,6 +221,15 @@ struct srb { uint16_t reserved2; }; +/* Mailbox request block structure */ +struct mrb { + struct scsi_qla_host *ha; + struct mbox_cmd_iocb *mbox; + uint32_t mbox_cmd; + uint16_t iocb_cnt; /* Number of used iocbs */ + uint32_t pid; +}; + /* * Asynchronous Event Queue structure */ @@ -303,6 +312,7 @@ struct ql4_tuple_ddb { enum qla4_work_type { QLA4_EVENT_AEN, + QLA4_EVENT_PING_STATUS, }; struct qla4_work_evt { @@ -314,6 +324,12 @@ struct qla4_work_evt { uint32_t data_size; uint8_t data[0]; } aen; + struct { + uint32_t status; + uint32_t pid; + uint32_t data_size; + uint8_t data[0]; + } ping; } u; }; @@ -690,6 +706,11 @@ struct scsi_qla_host { /* event work list */ struct list_head work_list; spinlock_t work_lock; + + /* mbox iocb */ +#define MAX_MRB 128 + struct mrb *active_mrb_array[MAX_MRB]; + uint32_t mrb_index; }; struct ql4_task_data { diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h index 5f82b5decd0..210cd1d6447 100644 --- a/drivers/scsi/qla4xxx/ql4_fw.h +++ b/drivers/scsi/qla4xxx/ql4_fw.h @@ -331,6 +331,10 @@ struct qla_flt_region { /* Mailbox command definitions */ #define MBOX_CMD_ABOUT_FW 0x0009 #define MBOX_CMD_PING 0x000B +#define PING_IPV6_PROTOCOL_ENABLE 0x1 +#define PING_IPV6_LINKLOCAL_ADDR 0x4 +#define PING_IPV6_ADDR0 0x8 +#define PING_IPV6_ADDR1 0xC #define MBOX_CMD_ENABLE_INTRS 0x0010 #define INTR_DISABLE 0 #define INTR_ENABLE 1 @@ -922,6 +926,8 @@ struct qla4_header { #define ET_CMND_T3 0x19 #define ET_PASSTHRU0 0x3A #define ET_PASSTHRU_STATUS 0x3C +#define ET_MBOX_CMD 0x38 +#define ET_MBOX_STATUS 0x39 uint8_t entryStatus; uint8_t systemDefined; @@ -1122,6 +1128,20 @@ struct passthru_status { uint8_t res4[16]; /* 30-3F */ }; +struct mbox_cmd_iocb { + struct qla4_header hdr; /* 00-03 */ + uint32_t handle; /* 04-07 */ + uint32_t in_mbox[8]; /* 08-25 */ + uint32_t res1[6]; /* 26-3F */ +}; + +struct mbox_status_iocb { + struct qla4_header hdr; /* 00-03 */ + uint32_t handle; /* 04-07 */ + uint32_t out_mbox[8]; /* 08-25 */ + uint32_t res1[6]; /* 26-3F */ +}; + /* * ISP queue - response queue entry definition. */ diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h index 34cf851978e..954ba918825 100644 --- a/drivers/scsi/qla4xxx/ql4_glbl.h +++ b/drivers/scsi/qla4xxx/ql4_glbl.h @@ -183,6 +183,11 @@ int qla4xxx_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index, void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset); int qla4xxx_post_aen_work(struct scsi_qla_host *ha, uint32_t aen_code, uint32_t data_size, uint8_t *data); +int qla4xxx_ping_iocb(struct scsi_qla_host *ha, uint32_t options, + uint32_t payload_size, uint32_t pid, uint8_t *ipaddr); +int qla4xxx_post_ping_evt_work(struct scsi_qla_host *ha, + uint32_t status, uint32_t pid, + uint32_t data_size, uint8_t *data); /* BSG Functions */ int qla4xxx_bsg_request(struct bsg_job *bsg_job); diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 90614f38b55..90ee5d8fa73 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -86,6 +86,7 @@ static void qla4xxx_init_response_q_entries(struct scsi_qla_host *ha) int qla4xxx_init_rings(struct scsi_qla_host *ha) { unsigned long flags = 0; + int i; /* Initialize request queue. */ spin_lock_irqsave(&ha->hardware_lock, flags); @@ -125,6 +126,10 @@ int qla4xxx_init_rings(struct scsi_qla_host *ha) qla4xxx_init_response_q_entries(ha); + /* Initialize mabilbox active array */ + for (i = 0; i < MAX_MRB; i++) + ha->active_mrb_array[i] = NULL; + spin_unlock_irqrestore(&ha->hardware_lock, flags); return QLA_SUCCESS; diff --git a/drivers/scsi/qla4xxx/ql4_iocb.c b/drivers/scsi/qla4xxx/ql4_iocb.c index 41066935190..c70651ddaf8 100644 --- a/drivers/scsi/qla4xxx/ql4_iocb.c +++ b/drivers/scsi/qla4xxx/ql4_iocb.c @@ -445,3 +445,95 @@ queuing_error: spin_unlock_irqrestore(&ha->hardware_lock, flags); return ret; } + +static struct mrb *qla4xxx_get_new_mrb(struct scsi_qla_host *ha) +{ + struct mrb *mrb; + + mrb = kzalloc(sizeof(*mrb), GFP_KERNEL); + if (!mrb) + return mrb; + + mrb->ha = ha; + return mrb; +} + +int qla4xxx_send_mbox_iocb(struct scsi_qla_host *ha, struct mrb *mrb, + uint32_t *in_mbox) +{ + int rval = QLA_SUCCESS; + uint32_t i; + unsigned long flags; + uint32_t index = 0; + + /* Acquire hardware specific lock */ + spin_lock_irqsave(&ha->hardware_lock, flags); + + /* Get pointer to the queue entry for the marker */ + rval = qla4xxx_get_req_pkt(ha, (struct queue_entry **) &(mrb->mbox)); + if (rval != QLA_SUCCESS) + goto exit_mbox_iocb; + + index = ha->mrb_index; + /* get valid mrb index*/ + for (i = 0; i < MAX_MRB; i++) { + index++; + if (index == MAX_MRB) + index = 1; + if (ha->active_mrb_array[index] == NULL) { + ha->mrb_index = index; + break; + } + } + + mrb->iocb_cnt = 1; + ha->active_mrb_array[index] = mrb; + mrb->mbox->handle = index; + mrb->mbox->hdr.entryType = ET_MBOX_CMD; + mrb->mbox->hdr.entryCount = mrb->iocb_cnt; + memcpy(mrb->mbox->in_mbox, in_mbox, 32); + mrb->mbox_cmd = in_mbox[0]; + wmb(); + + ha->isp_ops->queue_iocb(ha); +exit_mbox_iocb: + spin_unlock_irqrestore(&ha->hardware_lock, flags); + return rval; +} + +int qla4xxx_ping_iocb(struct scsi_qla_host *ha, uint32_t options, + uint32_t payload_size, uint32_t pid, uint8_t *ipaddr) +{ + uint32_t in_mbox[8]; + struct mrb *mrb = NULL; + int rval = QLA_SUCCESS; + + memset(in_mbox, 0, sizeof(in_mbox)); + + mrb = qla4xxx_get_new_mrb(ha); + if (!mrb) { + DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: fail to get new mrb\n", + __func__)); + rval = QLA_ERROR; + goto exit_ping; + } + + in_mbox[0] = MBOX_CMD_PING; + in_mbox[1] = options; + memcpy(&in_mbox[2], &ipaddr[0], 4); + memcpy(&in_mbox[3], &ipaddr[4], 4); + memcpy(&in_mbox[4], &ipaddr[8], 4); + memcpy(&in_mbox[5], &ipaddr[12], 4); + in_mbox[6] = payload_size; + + mrb->pid = pid; + rval = qla4xxx_send_mbox_iocb(ha, mrb, in_mbox); + + if (rval != QLA_SUCCESS) + goto exit_ping; + + return rval; +exit_ping: + kfree(mrb); + return rval; +} diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index 954fe84be57..7c9f28b7da7 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -385,6 +385,71 @@ static void qla4xxx_passthru_status_entry(struct scsi_qla_host *ha, queue_work(ha->task_wq, &task_data->task_work); } +static struct mrb *qla4xxx_del_mrb_from_active_array(struct scsi_qla_host *ha, + uint32_t index) +{ + struct mrb *mrb = NULL; + + /* validate handle and remove from active array */ + if (index >= MAX_MRB) + return mrb; + + mrb = ha->active_mrb_array[index]; + ha->active_mrb_array[index] = NULL; + if (!mrb) + return mrb; + + /* update counters */ + ha->req_q_count += mrb->iocb_cnt; + ha->iocb_cnt -= mrb->iocb_cnt; + + return mrb; +} + +static void qla4xxx_mbox_status_entry(struct scsi_qla_host *ha, + struct mbox_status_iocb *mbox_sts_entry) +{ + struct mrb *mrb; + uint32_t status; + uint32_t data_size; + + mrb = qla4xxx_del_mrb_from_active_array(ha, + le32_to_cpu(mbox_sts_entry->handle)); + + if (mrb == NULL) { + ql4_printk(KERN_WARNING, ha, "%s: mrb[%d] is null\n", __func__, + mbox_sts_entry->handle); + return; + } + + switch (mrb->mbox_cmd) { + case MBOX_CMD_PING: + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: mbox_cmd = 0x%x, " + "mbox_sts[0] = 0x%x, mbox_sts[6] = 0x%x\n", + __func__, mrb->mbox_cmd, + mbox_sts_entry->out_mbox[0], + mbox_sts_entry->out_mbox[6])); + + if (mbox_sts_entry->out_mbox[0] == MBOX_STS_COMMAND_COMPLETE) + status = QLA_SUCCESS; + else + status = QLA_ERROR; + + data_size = sizeof(mbox_sts_entry->out_mbox); + + qla4xxx_post_ping_evt_work(ha, status, mrb->pid, data_size, + (uint8_t *) mbox_sts_entry->out_mbox); + break; + + default: + DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: invalid mbox_cmd = " + "0x%x\n", __func__, mrb->mbox_cmd)); + } + + kfree(mrb); + return; +} + /** * qla4xxx_process_response_queue - process response queue completions * @ha: Pointer to host adapter structure. @@ -461,6 +526,13 @@ void qla4xxx_process_response_queue(struct scsi_qla_host *ha) "ignoring\n", ha->host_no, __func__)); break; + case ET_MBOX_STATUS: + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s: mbox status IOCB\n", __func__)); + qla4xxx_mbox_status_entry(ha, + (struct mbox_status_iocb *)sts_entry); + break; + default: /* * Invalid entry in response queue, reset RISC diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index d423f7afbbd..877c0e220ac 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -118,6 +118,10 @@ static void qla4xxx_task_cleanup(struct iscsi_task *); static void qla4xxx_fail_session(struct iscsi_cls_session *cls_session); static void qla4xxx_conn_get_stats(struct iscsi_cls_conn *cls_conn, struct iscsi_stats *stats); +static int qla4xxx_send_ping(struct Scsi_Host *shost, uint32_t iface_num, + uint32_t iface_type, uint32_t payload_size, + uint32_t pid, struct sockaddr *dst_addr); + /* * SCSI host template entry points */ @@ -194,10 +198,91 @@ static struct iscsi_transport qla4xxx_iscsi_transport = { .set_iface_param = qla4xxx_iface_set_param, .get_iface_param = qla4xxx_get_iface_param, .bsg_request = qla4xxx_bsg_request, + .send_ping = qla4xxx_send_ping, }; static struct scsi_transport_template *qla4xxx_scsi_transport; +static int qla4xxx_send_ping(struct Scsi_Host *shost, uint32_t iface_num, + uint32_t iface_type, uint32_t payload_size, + uint32_t pid, struct sockaddr *dst_addr) +{ + struct scsi_qla_host *ha = to_qla_host(shost); + struct sockaddr_in *addr; + struct sockaddr_in6 *addr6; + uint32_t options = 0; + uint8_t ipaddr[IPv6_ADDR_LEN]; + int rval; + + memset(ipaddr, 0, IPv6_ADDR_LEN); + /* IPv4 to IPv4 */ + if ((iface_type == ISCSI_IFACE_TYPE_IPV4) && + (dst_addr->sa_family == AF_INET)) { + addr = (struct sockaddr_in *)dst_addr; + memcpy(ipaddr, &addr->sin_addr.s_addr, IP_ADDR_LEN); + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: IPv4 Ping src: %pI4 " + "dest: %pI4\n", __func__, + &ha->ip_config.ip_address, ipaddr)); + rval = qla4xxx_ping_iocb(ha, options, payload_size, pid, + ipaddr); + if (rval) + rval = -EINVAL; + } else if ((iface_type == ISCSI_IFACE_TYPE_IPV6) && + (dst_addr->sa_family == AF_INET6)) { + /* IPv6 to IPv6 */ + addr6 = (struct sockaddr_in6 *)dst_addr; + memcpy(ipaddr, &addr6->sin6_addr.in6_u.u6_addr8, IPv6_ADDR_LEN); + + options |= PING_IPV6_PROTOCOL_ENABLE; + + /* Ping using LinkLocal address */ + if ((iface_num == 0) || (iface_num == 1)) { + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: LinkLocal Ping " + "src: %pI6 dest: %pI6\n", __func__, + &ha->ip_config.ipv6_link_local_addr, + ipaddr)); + options |= PING_IPV6_LINKLOCAL_ADDR; + rval = qla4xxx_ping_iocb(ha, options, payload_size, + pid, ipaddr); + } else { + ql4_printk(KERN_WARNING, ha, "%s: iface num = %d " + "not supported\n", __func__, iface_num); + rval = -ENOSYS; + goto exit_send_ping; + } + + /* + * If ping using LinkLocal address fails, try ping using + * IPv6 address + */ + if (rval != QLA_SUCCESS) { + options &= ~PING_IPV6_LINKLOCAL_ADDR; + if (iface_num == 0) { + options |= PING_IPV6_ADDR0; + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: IPv6 " + "Ping src: %pI6 " + "dest: %pI6\n", __func__, + &ha->ip_config.ipv6_addr0, + ipaddr)); + } else if (iface_num == 1) { + options |= PING_IPV6_ADDR1; + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: IPv6 " + "Ping src: %pI6 " + "dest: %pI6\n", __func__, + &ha->ip_config.ipv6_addr1, + ipaddr)); + } + rval = qla4xxx_ping_iocb(ha, options, payload_size, + pid, ipaddr); + if (rval) + rval = -EINVAL; + } + } else + rval = -ENOSYS; +exit_send_ping: + return rval; +} + static umode_t ql4_attr_is_visible(int param_type, int param) { switch (param_type) { @@ -2897,6 +2982,26 @@ int qla4xxx_post_aen_work(struct scsi_qla_host *ha, return QLA_SUCCESS; } +int qla4xxx_post_ping_evt_work(struct scsi_qla_host *ha, + uint32_t status, uint32_t pid, + uint32_t data_size, uint8_t *data) +{ + struct qla4_work_evt *e; + + e = qla4xxx_alloc_work(ha, data_size, QLA4_EVENT_PING_STATUS); + if (!e) + return QLA_ERROR; + + e->u.ping.status = status; + e->u.ping.pid = pid; + e->u.ping.data_size = data_size; + memcpy(e->u.ping.data, data, data_size); + + qla4xxx_post_work(ha, e); + + return QLA_SUCCESS; +} + void qla4xxx_do_work(struct scsi_qla_host *ha) { struct qla4_work_evt *e, *tmp; @@ -2918,6 +3023,14 @@ void qla4xxx_do_work(struct scsi_qla_host *ha) e->u.aen.data_size, e->u.aen.data); break; + case QLA4_EVENT_PING_STATUS: + iscsi_ping_comp_event(ha->host_no, + &qla4xxx_iscsi_transport, + e->u.ping.status, + e->u.ping.pid, + e->u.ping.data_size, + e->u.ping.data); + break; default: ql4_printk(KERN_WARNING, ha, "event type: 0x%x not " "supported", e->type); -- cgit v1.2.3-70-g09d2 From cf3059a12936f8e92876e56b50bcdb092be70645 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Mon, 13 Feb 2012 18:30:50 +0530 Subject: [SCSI] qla4xxx: Update driver version to 5.02.00-k14 Signed-off-by: Vikas Chaudhary Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h index 601ee3da3a0..7f20b7f1084 100644 --- a/drivers/scsi/qla4xxx/ql4_version.h +++ b/drivers/scsi/qla4xxx/ql4_version.h @@ -5,4 +5,4 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ -#define QLA4XXX_DRIVER_VERSION "5.02.00-k13" +#define QLA4XXX_DRIVER_VERSION "5.02.00-k14" -- cgit v1.2.3-70-g09d2 From c834b1c4ec8ccc9c2d814bd78264b509708fe6dd Mon Sep 17 00:00:00 2001 From: Tomas Henzl Date: Mon, 13 Feb 2012 18:29:58 +0100 Subject: [SCSI] mpt2sas: add missing allocation check The __get_free_pages can fail, so the return value should be checked. Spotted thanks to Stanislaw. Signed-off-by: Tomas Henzl Acked-by: "Nandigama, Nagalakshmi" Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index a78036f5e1a..82fa6ce481f 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -2575,6 +2575,11 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) ioc->chain_lookup = (struct chain_tracker *)__get_free_pages( GFP_KERNEL, ioc->chain_pages); + if (!ioc->chain_lookup) { + printk(MPT2SAS_ERR_FMT "chain_lookup: get_free_pages failed, " + "sz(%d)\n", ioc->name, (int)sz); + goto out; + } ioc->chain_dma_pool = pci_pool_create("chain pool", ioc->pdev, ioc->request_sz, 16, 0); if (!ioc->chain_dma_pool) { -- cgit v1.2.3-70-g09d2 From 66a651aa7a48b7c6181aff556937454c87bb9feb Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 13 Feb 2012 15:38:22 -0500 Subject: [SCSI] Ensure discard failure gets treated as a target problem The error reported up the stack for a discard failure did not clearly indicate that the command was processed and subsequently failed by the target device. Return -EREMOTEIO so multipathing does not classify this condition as a path failure. Signed-off-by: Martin K. Petersen Acked-by: Mike Snitzer Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 5b770e9e82c..b4833deffd3 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -880,6 +880,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) cmd->cmnd[0] == WRITE_SAME)) { description = "Discard failure"; action = ACTION_FAIL; + error = -EREMOTEIO; } else action = ACTION_FAIL; break; -- cgit v1.2.3-70-g09d2 From 89730393f260aef7fce9f6fd475da148517a4c5c Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 13 Feb 2012 15:39:00 -0500 Subject: [SCSI] sd: Make sure provisioning mode is reported correctly The provisioning_mode parameter in sysfs did not get updated in the SD_LBP_DISABLE case. Make sure the provisioning mode is always set correctly. Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index c691fb50e6c..8c525aa1b85 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -497,6 +497,8 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode) max(sdkp->physical_block_size, sdkp->unmap_granularity * logical_block_size); + sdkp->provisioning_mode = mode; + switch (mode) { case SD_LBP_DISABLE: @@ -524,8 +526,6 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode) q->limits.max_discard_sectors = max_blocks * (logical_block_size >> 9); queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); - - sdkp->provisioning_mode = mode; } /** -- cgit v1.2.3-70-g09d2 From 47ac56db133cb0b6cf3c8b156db854c158fb9dae Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Mon, 13 Feb 2012 18:35:11 -0500 Subject: [SCSI] scsi_error: classify some ILLEGAL_REQUEST sense as a permanent TARGET_ERROR Permanent target failures are non-retryable and should be classified as TARGET_ERROR; otherwise dm-multipath will retry an IO request that will always fail at the target. A SCSI command that fails with ILLEGAL_REQUEST sense and Additional sense 0x20, 0x21, 0x24 or 0x26 represents a permanent TARGET_ERROR. Signed-off-by: Mike Snitzer Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 6ae3b5dbd37..f66e90db3be 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -366,6 +366,14 @@ static int scsi_check_sense(struct scsi_cmnd *scmd) return TARGET_ERROR; case ILLEGAL_REQUEST: + if (sshdr.asc == 0x20 || /* Invalid command operation code */ + sshdr.asc == 0x21 || /* Logical block address out of range */ + sshdr.asc == 0x24 || /* Invalid field in cdb */ + sshdr.asc == 0x26) { /* Parameter value invalid */ + return TARGET_ERROR; + } + return SUCCESS; + default: return SUCCESS; } -- cgit v1.2.3-70-g09d2 From 5a4f934e65620130d033725e85b7fdff4ac2ffbd Mon Sep 17 00:00:00 2001 From: Tomas Henzl Date: Tue, 14 Feb 2012 18:07:59 +0100 Subject: [SCSI] hpsa: add some older controllers to the kdump blacklist Some other older controllers also do have problems to perform a kdump. Adding controllers to this list means that the driver will signal this non-ability via a resettable flag correctly. The unsupported list was created after a consultation with HP. Signed-off-by: Tomas Henzl Acked-by: Mike Miller Signed-off-by: James Bottomley --- drivers/scsi/hpsa.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 5019bea323c..500e20dd56e 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -298,11 +298,23 @@ static u32 unresettable_controller[] = { 0x40800E11, /* Smart Array 5i */ 0x409C0E11, /* Smart Array 6400 */ 0x409D0E11, /* Smart Array 6400 EM */ + 0x40700E11, /* Smart Array 5300 */ + 0x40820E11, /* Smart Array 532 */ + 0x40830E11, /* Smart Array 5312 */ + 0x409A0E11, /* Smart Array 641 */ + 0x409B0E11, /* Smart Array 642 */ + 0x40910E11, /* Smart Array 6i */ }; /* List of controllers which cannot even be soft reset */ static u32 soft_unresettable_controller[] = { 0x40800E11, /* Smart Array 5i */ + 0x40700E11, /* Smart Array 5300 */ + 0x40820E11, /* Smart Array 532 */ + 0x40830E11, /* Smart Array 5312 */ + 0x409A0E11, /* Smart Array 641 */ + 0x409B0E11, /* Smart Array 642 */ + 0x40910E11, /* Smart Array 6i */ /* Exclude 640x boards. These are two pci devices in one slot * which share a battery backed cache module. One controls the * cache, the other accesses the cache through the one that controls -- cgit v1.2.3-70-g09d2 From 4fe74b1cb051dc9d47a80e263c388cf1651783d4 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Sun, 5 Feb 2012 12:16:00 +0100 Subject: [SCSI] virtio-scsi: SCSI driver for QEMU based virtual machines The virtio-scsi HBA is the basis of an alternative storage stack for QEMU-based virtual machines (including KVM). Compared to virtio-blk it is more scalable, because it supports many LUNs on a single PCI slot), more powerful (it more easily supports passthrough of host devices to the guest) and more easily extensible (new SCSI features implemented by QEMU should not require updating the driver in the guest). Acked-by: Rusty Russell Signed-off-by: Paolo Bonzini Signed-off-by: James Bottomley --- drivers/scsi/Kconfig | 8 + drivers/scsi/Makefile | 1 + drivers/scsi/virtio_scsi.c | 594 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/virtio_ids.h | 1 + include/linux/virtio_scsi.h | 114 +++++++++ 5 files changed, 718 insertions(+) create mode 100644 drivers/scsi/virtio_scsi.c create mode 100644 include/linux/virtio_scsi.h diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 16570aa84aa..827ebaf4a4a 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1897,6 +1897,14 @@ config SCSI_BFA_FC To compile this driver as a module, choose M here. The module will be called bfa. +config SCSI_VIRTIO + tristate "virtio-scsi support (EXPERIMENTAL)" + depends on EXPERIMENTAL && VIRTIO + help + This is the virtual HBA driver for virtio. If the kernel will + be used in a virtual machine, say Y or M. + + endif # SCSI_LOWLEVEL source "drivers/scsi/pcmcia/Kconfig" diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 2b887498be5..351b28b3d7d 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -141,6 +141,7 @@ obj-$(CONFIG_SCSI_CXGB4_ISCSI) += libiscsi.o libiscsi_tcp.o cxgbi/ obj-$(CONFIG_SCSI_BNX2_ISCSI) += libiscsi.o bnx2i/ obj-$(CONFIG_BE2ISCSI) += libiscsi.o be2iscsi/ obj-$(CONFIG_SCSI_PMCRAID) += pmcraid.o +obj-$(CONFIG_SCSI_VIRTIO) += virtio_scsi.o obj-$(CONFIG_VMWARE_PVSCSI) += vmw_pvscsi.o obj-$(CONFIG_ARM) += arm/ diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c new file mode 100644 index 00000000000..efccd72c4a3 --- /dev/null +++ b/drivers/scsi/virtio_scsi.c @@ -0,0 +1,594 @@ +/* + * Virtio SCSI HBA driver + * + * Copyright IBM Corp. 2010 + * Copyright Red Hat, Inc. 2011 + * + * Authors: + * Stefan Hajnoczi + * Paolo Bonzini + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define VIRTIO_SCSI_MEMPOOL_SZ 64 + +/* Command queue element */ +struct virtio_scsi_cmd { + struct scsi_cmnd *sc; + struct completion *comp; + union { + struct virtio_scsi_cmd_req cmd; + struct virtio_scsi_ctrl_tmf_req tmf; + struct virtio_scsi_ctrl_an_req an; + } req; + union { + struct virtio_scsi_cmd_resp cmd; + struct virtio_scsi_ctrl_tmf_resp tmf; + struct virtio_scsi_ctrl_an_resp an; + struct virtio_scsi_event evt; + } resp; +} ____cacheline_aligned_in_smp; + +/* Driver instance state */ +struct virtio_scsi { + /* Protects ctrl_vq, req_vq and sg[] */ + spinlock_t vq_lock; + + struct virtio_device *vdev; + struct virtqueue *ctrl_vq; + struct virtqueue *event_vq; + struct virtqueue *req_vq; + + /* For sglist construction when adding commands to the virtqueue. */ + struct scatterlist sg[]; +}; + +static struct kmem_cache *virtscsi_cmd_cache; +static mempool_t *virtscsi_cmd_pool; + +static inline struct Scsi_Host *virtio_scsi_host(struct virtio_device *vdev) +{ + return vdev->priv; +} + +static void virtscsi_compute_resid(struct scsi_cmnd *sc, u32 resid) +{ + if (!resid) + return; + + if (!scsi_bidi_cmnd(sc)) { + scsi_set_resid(sc, resid); + return; + } + + scsi_in(sc)->resid = min(resid, scsi_in(sc)->length); + scsi_out(sc)->resid = resid - scsi_in(sc)->resid; +} + +/** + * virtscsi_complete_cmd - finish a scsi_cmd and invoke scsi_done + * + * Called with vq_lock held. + */ +static void virtscsi_complete_cmd(void *buf) +{ + struct virtio_scsi_cmd *cmd = buf; + struct scsi_cmnd *sc = cmd->sc; + struct virtio_scsi_cmd_resp *resp = &cmd->resp.cmd; + + dev_dbg(&sc->device->sdev_gendev, + "cmd %p response %u status %#02x sense_len %u\n", + sc, resp->response, resp->status, resp->sense_len); + + sc->result = resp->status; + virtscsi_compute_resid(sc, resp->resid); + switch (resp->response) { + case VIRTIO_SCSI_S_OK: + set_host_byte(sc, DID_OK); + break; + case VIRTIO_SCSI_S_OVERRUN: + set_host_byte(sc, DID_ERROR); + break; + case VIRTIO_SCSI_S_ABORTED: + set_host_byte(sc, DID_ABORT); + break; + case VIRTIO_SCSI_S_BAD_TARGET: + set_host_byte(sc, DID_BAD_TARGET); + break; + case VIRTIO_SCSI_S_RESET: + set_host_byte(sc, DID_RESET); + break; + case VIRTIO_SCSI_S_BUSY: + set_host_byte(sc, DID_BUS_BUSY); + break; + case VIRTIO_SCSI_S_TRANSPORT_FAILURE: + set_host_byte(sc, DID_TRANSPORT_DISRUPTED); + break; + case VIRTIO_SCSI_S_TARGET_FAILURE: + set_host_byte(sc, DID_TARGET_FAILURE); + break; + case VIRTIO_SCSI_S_NEXUS_FAILURE: + set_host_byte(sc, DID_NEXUS_FAILURE); + break; + default: + scmd_printk(KERN_WARNING, sc, "Unknown response %d", + resp->response); + /* fall through */ + case VIRTIO_SCSI_S_FAILURE: + set_host_byte(sc, DID_ERROR); + break; + } + + WARN_ON(resp->sense_len > VIRTIO_SCSI_SENSE_SIZE); + if (sc->sense_buffer) { + memcpy(sc->sense_buffer, resp->sense, + min_t(u32, resp->sense_len, VIRTIO_SCSI_SENSE_SIZE)); + if (resp->sense_len) + set_driver_byte(sc, DRIVER_SENSE); + } + + mempool_free(cmd, virtscsi_cmd_pool); + sc->scsi_done(sc); +} + +static void virtscsi_vq_done(struct virtqueue *vq, void (*fn)(void *buf)) +{ + struct Scsi_Host *sh = virtio_scsi_host(vq->vdev); + struct virtio_scsi *vscsi = shost_priv(sh); + void *buf; + unsigned long flags; + unsigned int len; + + spin_lock_irqsave(&vscsi->vq_lock, flags); + + do { + virtqueue_disable_cb(vq); + while ((buf = virtqueue_get_buf(vq, &len)) != NULL) + fn(buf); + } while (!virtqueue_enable_cb(vq)); + + spin_unlock_irqrestore(&vscsi->vq_lock, flags); +} + +static void virtscsi_req_done(struct virtqueue *vq) +{ + virtscsi_vq_done(vq, virtscsi_complete_cmd); +}; + +static void virtscsi_complete_free(void *buf) +{ + struct virtio_scsi_cmd *cmd = buf; + + if (cmd->comp) + complete_all(cmd->comp); + mempool_free(cmd, virtscsi_cmd_pool); +} + +static void virtscsi_ctrl_done(struct virtqueue *vq) +{ + virtscsi_vq_done(vq, virtscsi_complete_free); +}; + +static void virtscsi_event_done(struct virtqueue *vq) +{ + virtscsi_vq_done(vq, virtscsi_complete_free); +}; + +static void virtscsi_map_sgl(struct scatterlist *sg, unsigned int *p_idx, + struct scsi_data_buffer *sdb) +{ + struct sg_table *table = &sdb->table; + struct scatterlist *sg_elem; + unsigned int idx = *p_idx; + int i; + + for_each_sg(table->sgl, sg_elem, table->nents, i) + sg_set_buf(&sg[idx++], sg_virt(sg_elem), sg_elem->length); + + *p_idx = idx; +} + +/** + * virtscsi_map_cmd - map a scsi_cmd to a virtqueue scatterlist + * @vscsi : virtio_scsi state + * @cmd : command structure + * @out_num : number of read-only elements + * @in_num : number of write-only elements + * @req_size : size of the request buffer + * @resp_size : size of the response buffer + * + * Called with vq_lock held. + */ +static void virtscsi_map_cmd(struct virtio_scsi *vscsi, + struct virtio_scsi_cmd *cmd, + unsigned *out_num, unsigned *in_num, + size_t req_size, size_t resp_size) +{ + struct scsi_cmnd *sc = cmd->sc; + struct scatterlist *sg = vscsi->sg; + unsigned int idx = 0; + + if (sc) { + struct Scsi_Host *shost = virtio_scsi_host(vscsi->vdev); + BUG_ON(scsi_sg_count(sc) > shost->sg_tablesize); + + /* TODO: check feature bit and fail if unsupported? */ + BUG_ON(sc->sc_data_direction == DMA_BIDIRECTIONAL); + } + + /* Request header. */ + sg_set_buf(&sg[idx++], &cmd->req, req_size); + + /* Data-out buffer. */ + if (sc && sc->sc_data_direction != DMA_FROM_DEVICE) + virtscsi_map_sgl(sg, &idx, scsi_out(sc)); + + *out_num = idx; + + /* Response header. */ + sg_set_buf(&sg[idx++], &cmd->resp, resp_size); + + /* Data-in buffer */ + if (sc && sc->sc_data_direction != DMA_TO_DEVICE) + virtscsi_map_sgl(sg, &idx, scsi_in(sc)); + + *in_num = idx - *out_num; +} + +static int virtscsi_kick_cmd(struct virtio_scsi *vscsi, struct virtqueue *vq, + struct virtio_scsi_cmd *cmd, + size_t req_size, size_t resp_size, gfp_t gfp) +{ + unsigned int out_num, in_num; + unsigned long flags; + int ret; + + spin_lock_irqsave(&vscsi->vq_lock, flags); + + virtscsi_map_cmd(vscsi, cmd, &out_num, &in_num, req_size, resp_size); + + ret = virtqueue_add_buf(vq, vscsi->sg, out_num, in_num, cmd, gfp); + if (ret >= 0) + virtqueue_kick(vq); + + spin_unlock_irqrestore(&vscsi->vq_lock, flags); + return ret; +} + +static int virtscsi_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *sc) +{ + struct virtio_scsi *vscsi = shost_priv(sh); + struct virtio_scsi_cmd *cmd; + int ret; + + dev_dbg(&sc->device->sdev_gendev, + "cmd %p CDB: %#02x\n", sc, sc->cmnd[0]); + + ret = SCSI_MLQUEUE_HOST_BUSY; + cmd = mempool_alloc(virtscsi_cmd_pool, GFP_ATOMIC); + if (!cmd) + goto out; + + memset(cmd, 0, sizeof(*cmd)); + cmd->sc = sc; + cmd->req.cmd = (struct virtio_scsi_cmd_req){ + .lun[0] = 1, + .lun[1] = sc->device->id, + .lun[2] = (sc->device->lun >> 8) | 0x40, + .lun[3] = sc->device->lun & 0xff, + .tag = (unsigned long)sc, + .task_attr = VIRTIO_SCSI_S_SIMPLE, + .prio = 0, + .crn = 0, + }; + + BUG_ON(sc->cmd_len > VIRTIO_SCSI_CDB_SIZE); + memcpy(cmd->req.cmd.cdb, sc->cmnd, sc->cmd_len); + + if (virtscsi_kick_cmd(vscsi, vscsi->req_vq, cmd, + sizeof cmd->req.cmd, sizeof cmd->resp.cmd, + GFP_ATOMIC) >= 0) + ret = 0; + +out: + return ret; +} + +static int virtscsi_tmf(struct virtio_scsi *vscsi, struct virtio_scsi_cmd *cmd) +{ + DECLARE_COMPLETION_ONSTACK(comp); + int ret; + + cmd->comp = ∁ + ret = virtscsi_kick_cmd(vscsi, vscsi->ctrl_vq, cmd, + sizeof cmd->req.tmf, sizeof cmd->resp.tmf, + GFP_NOIO); + if (ret < 0) + return FAILED; + + wait_for_completion(&comp); + if (cmd->resp.tmf.response != VIRTIO_SCSI_S_OK && + cmd->resp.tmf.response != VIRTIO_SCSI_S_FUNCTION_SUCCEEDED) + return FAILED; + + return SUCCESS; +} + +static int virtscsi_device_reset(struct scsi_cmnd *sc) +{ + struct virtio_scsi *vscsi = shost_priv(sc->device->host); + struct virtio_scsi_cmd *cmd; + + sdev_printk(KERN_INFO, sc->device, "device reset\n"); + cmd = mempool_alloc(virtscsi_cmd_pool, GFP_NOIO); + if (!cmd) + return FAILED; + + memset(cmd, 0, sizeof(*cmd)); + cmd->sc = sc; + cmd->req.tmf = (struct virtio_scsi_ctrl_tmf_req){ + .type = VIRTIO_SCSI_T_TMF, + .subtype = VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET, + .lun[0] = 1, + .lun[1] = sc->device->id, + .lun[2] = (sc->device->lun >> 8) | 0x40, + .lun[3] = sc->device->lun & 0xff, + }; + return virtscsi_tmf(vscsi, cmd); +} + +static int virtscsi_abort(struct scsi_cmnd *sc) +{ + struct virtio_scsi *vscsi = shost_priv(sc->device->host); + struct virtio_scsi_cmd *cmd; + + scmd_printk(KERN_INFO, sc, "abort\n"); + cmd = mempool_alloc(virtscsi_cmd_pool, GFP_NOIO); + if (!cmd) + return FAILED; + + memset(cmd, 0, sizeof(*cmd)); + cmd->sc = sc; + cmd->req.tmf = (struct virtio_scsi_ctrl_tmf_req){ + .type = VIRTIO_SCSI_T_TMF, + .subtype = VIRTIO_SCSI_T_TMF_ABORT_TASK, + .lun[0] = 1, + .lun[1] = sc->device->id, + .lun[2] = (sc->device->lun >> 8) | 0x40, + .lun[3] = sc->device->lun & 0xff, + .tag = (unsigned long)sc, + }; + return virtscsi_tmf(vscsi, cmd); +} + +static struct scsi_host_template virtscsi_host_template = { + .module = THIS_MODULE, + .name = "Virtio SCSI HBA", + .proc_name = "virtio_scsi", + .queuecommand = virtscsi_queuecommand, + .this_id = -1, + .eh_abort_handler = virtscsi_abort, + .eh_device_reset_handler = virtscsi_device_reset, + + .can_queue = 1024, + .dma_boundary = UINT_MAX, + .use_clustering = ENABLE_CLUSTERING, +}; + +#define virtscsi_config_get(vdev, fld) \ + ({ \ + typeof(((struct virtio_scsi_config *)0)->fld) __val; \ + vdev->config->get(vdev, \ + offsetof(struct virtio_scsi_config, fld), \ + &__val, sizeof(__val)); \ + __val; \ + }) + +#define virtscsi_config_set(vdev, fld, val) \ + (void)({ \ + typeof(((struct virtio_scsi_config *)0)->fld) __val = (val); \ + vdev->config->set(vdev, \ + offsetof(struct virtio_scsi_config, fld), \ + &__val, sizeof(__val)); \ + }) + +static int virtscsi_init(struct virtio_device *vdev, + struct virtio_scsi *vscsi) +{ + int err; + struct virtqueue *vqs[3]; + vq_callback_t *callbacks[] = { + virtscsi_ctrl_done, + virtscsi_event_done, + virtscsi_req_done + }; + const char *names[] = { + "control", + "event", + "request" + }; + + /* Discover virtqueues and write information to configuration. */ + err = vdev->config->find_vqs(vdev, 3, vqs, callbacks, names); + if (err) + return err; + + vscsi->ctrl_vq = vqs[0]; + vscsi->event_vq = vqs[1]; + vscsi->req_vq = vqs[2]; + + virtscsi_config_set(vdev, cdb_size, VIRTIO_SCSI_CDB_SIZE); + virtscsi_config_set(vdev, sense_size, VIRTIO_SCSI_SENSE_SIZE); + return 0; +} + +static int __devinit virtscsi_probe(struct virtio_device *vdev) +{ + struct Scsi_Host *shost; + struct virtio_scsi *vscsi; + int err; + u32 sg_elems; + u32 cmd_per_lun; + + /* We need to know how many segments before we allocate. + * We need an extra sg elements at head and tail. + */ + sg_elems = virtscsi_config_get(vdev, seg_max) ?: 1; + + /* Allocate memory and link the structs together. */ + shost = scsi_host_alloc(&virtscsi_host_template, + sizeof(*vscsi) + sizeof(vscsi->sg[0]) * (sg_elems + 2)); + + if (!shost) + return -ENOMEM; + + shost->sg_tablesize = sg_elems; + vscsi = shost_priv(shost); + vscsi->vdev = vdev; + vdev->priv = shost; + + /* Random initializations. */ + spin_lock_init(&vscsi->vq_lock); + sg_init_table(vscsi->sg, sg_elems + 2); + + err = virtscsi_init(vdev, vscsi); + if (err) + goto virtscsi_init_failed; + + cmd_per_lun = virtscsi_config_get(vdev, cmd_per_lun) ?: 1; + shost->cmd_per_lun = min_t(u32, cmd_per_lun, shost->can_queue); + shost->max_sectors = virtscsi_config_get(vdev, max_sectors) ?: 0xFFFF; + shost->max_lun = virtscsi_config_get(vdev, max_lun) + 1; + shost->max_id = virtscsi_config_get(vdev, max_target) + 1; + shost->max_channel = 0; + shost->max_cmd_len = VIRTIO_SCSI_CDB_SIZE; + err = scsi_add_host(shost, &vdev->dev); + if (err) + goto scsi_add_host_failed; + + scsi_scan_host(shost); + + return 0; + +scsi_add_host_failed: + vdev->config->del_vqs(vdev); +virtscsi_init_failed: + scsi_host_put(shost); + return err; +} + +static void virtscsi_remove_vqs(struct virtio_device *vdev) +{ + /* Stop all the virtqueues. */ + vdev->config->reset(vdev); + + vdev->config->del_vqs(vdev); +} + +static void __devexit virtscsi_remove(struct virtio_device *vdev) +{ + struct Scsi_Host *shost = virtio_scsi_host(vdev); + + scsi_remove_host(shost); + + virtscsi_remove_vqs(vdev); + scsi_host_put(shost); +} + +#ifdef CONFIG_PM +static int virtscsi_freeze(struct virtio_device *vdev) +{ + virtscsi_remove_vqs(vdev); + return 0; +} + +static int virtscsi_restore(struct virtio_device *vdev) +{ + struct Scsi_Host *sh = virtio_scsi_host(vdev); + struct virtio_scsi *vscsi = shost_priv(sh); + + return virtscsi_init(vdev, vscsi); +} +#endif + +static struct virtio_device_id id_table[] = { + { VIRTIO_ID_SCSI, VIRTIO_DEV_ANY_ID }, + { 0 }, +}; + +static struct virtio_driver virtio_scsi_driver = { + .driver.name = KBUILD_MODNAME, + .driver.owner = THIS_MODULE, + .id_table = id_table, + .probe = virtscsi_probe, +#ifdef CONFIG_PM + .freeze = virtscsi_freeze, + .restore = virtscsi_restore, +#endif + .remove = __devexit_p(virtscsi_remove), +}; + +static int __init init(void) +{ + int ret = -ENOMEM; + + virtscsi_cmd_cache = KMEM_CACHE(virtio_scsi_cmd, 0); + if (!virtscsi_cmd_cache) { + printk(KERN_ERR "kmem_cache_create() for " + "virtscsi_cmd_cache failed\n"); + goto error; + } + + + virtscsi_cmd_pool = + mempool_create_slab_pool(VIRTIO_SCSI_MEMPOOL_SZ, + virtscsi_cmd_cache); + if (!virtscsi_cmd_pool) { + printk(KERN_ERR "mempool_create() for" + "virtscsi_cmd_pool failed\n"); + goto error; + } + ret = register_virtio_driver(&virtio_scsi_driver); + if (ret < 0) + goto error; + + return 0; + +error: + if (virtscsi_cmd_pool) { + mempool_destroy(virtscsi_cmd_pool); + virtscsi_cmd_pool = NULL; + } + if (virtscsi_cmd_cache) { + kmem_cache_destroy(virtscsi_cmd_cache); + virtscsi_cmd_cache = NULL; + } + return ret; +} + +static void __exit fini(void) +{ + unregister_virtio_driver(&virtio_scsi_driver); + mempool_destroy(virtscsi_cmd_pool); + kmem_cache_destroy(virtscsi_cmd_cache); +} +module_init(init); +module_exit(fini); + +MODULE_DEVICE_TABLE(virtio, id_table); +MODULE_DESCRIPTION("Virtio SCSI HBA driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/virtio_ids.h b/include/linux/virtio_ids.h index 85bb0bb66ff..c5d8455c68c 100644 --- a/include/linux/virtio_ids.h +++ b/include/linux/virtio_ids.h @@ -34,6 +34,7 @@ #define VIRTIO_ID_CONSOLE 3 /* virtio console */ #define VIRTIO_ID_RNG 4 /* virtio ring */ #define VIRTIO_ID_BALLOON 5 /* virtio balloon */ +#define VIRTIO_ID_SCSI 8 /* virtio scsi */ #define VIRTIO_ID_9P 9 /* 9p virtio console */ #endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/include/linux/virtio_scsi.h b/include/linux/virtio_scsi.h new file mode 100644 index 00000000000..8ddeafdc054 --- /dev/null +++ b/include/linux/virtio_scsi.h @@ -0,0 +1,114 @@ +#ifndef _LINUX_VIRTIO_SCSI_H +#define _LINUX_VIRTIO_SCSI_H +/* This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. */ + +#define VIRTIO_SCSI_CDB_SIZE 32 +#define VIRTIO_SCSI_SENSE_SIZE 96 + +/* SCSI command request, followed by data-out */ +struct virtio_scsi_cmd_req { + u8 lun[8]; /* Logical Unit Number */ + u64 tag; /* Command identifier */ + u8 task_attr; /* Task attribute */ + u8 prio; + u8 crn; + u8 cdb[VIRTIO_SCSI_CDB_SIZE]; +} __packed; + +/* Response, followed by sense data and data-in */ +struct virtio_scsi_cmd_resp { + u32 sense_len; /* Sense data length */ + u32 resid; /* Residual bytes in data buffer */ + u16 status_qualifier; /* Status qualifier */ + u8 status; /* Command completion status */ + u8 response; /* Response values */ + u8 sense[VIRTIO_SCSI_SENSE_SIZE]; +} __packed; + +/* Task Management Request */ +struct virtio_scsi_ctrl_tmf_req { + u32 type; + u32 subtype; + u8 lun[8]; + u64 tag; +} __packed; + +struct virtio_scsi_ctrl_tmf_resp { + u8 response; +} __packed; + +/* Asynchronous notification query/subscription */ +struct virtio_scsi_ctrl_an_req { + u32 type; + u8 lun[8]; + u32 event_requested; +} __packed; + +struct virtio_scsi_ctrl_an_resp { + u32 event_actual; + u8 response; +} __packed; + +struct virtio_scsi_event { + u32 event; + u8 lun[8]; + u32 reason; +} __packed; + +struct virtio_scsi_config { + u32 num_queues; + u32 seg_max; + u32 max_sectors; + u32 cmd_per_lun; + u32 event_info_size; + u32 sense_size; + u32 cdb_size; + u16 max_channel; + u16 max_target; + u32 max_lun; +} __packed; + +/* Response codes */ +#define VIRTIO_SCSI_S_OK 0 +#define VIRTIO_SCSI_S_OVERRUN 1 +#define VIRTIO_SCSI_S_ABORTED 2 +#define VIRTIO_SCSI_S_BAD_TARGET 3 +#define VIRTIO_SCSI_S_RESET 4 +#define VIRTIO_SCSI_S_BUSY 5 +#define VIRTIO_SCSI_S_TRANSPORT_FAILURE 6 +#define VIRTIO_SCSI_S_TARGET_FAILURE 7 +#define VIRTIO_SCSI_S_NEXUS_FAILURE 8 +#define VIRTIO_SCSI_S_FAILURE 9 +#define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED 10 +#define VIRTIO_SCSI_S_FUNCTION_REJECTED 11 +#define VIRTIO_SCSI_S_INCORRECT_LUN 12 + +/* Controlq type codes. */ +#define VIRTIO_SCSI_T_TMF 0 +#define VIRTIO_SCSI_T_AN_QUERY 1 +#define VIRTIO_SCSI_T_AN_SUBSCRIBE 2 + +/* Valid TMF subtypes. */ +#define VIRTIO_SCSI_T_TMF_ABORT_TASK 0 +#define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET 1 +#define VIRTIO_SCSI_T_TMF_CLEAR_ACA 2 +#define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET 3 +#define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET 4 +#define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET 5 +#define VIRTIO_SCSI_T_TMF_QUERY_TASK 6 +#define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET 7 + +/* Events. */ +#define VIRTIO_SCSI_T_EVENTS_MISSED 0x80000000 +#define VIRTIO_SCSI_T_NO_EVENT 0 +#define VIRTIO_SCSI_T_TRANSPORT_RESET 1 +#define VIRTIO_SCSI_T_ASYNC_NOTIFY 2 + +#define VIRTIO_SCSI_S_SIMPLE 0 +#define VIRTIO_SCSI_S_ORDERED 1 +#define VIRTIO_SCSI_S_HEAD 2 +#define VIRTIO_SCSI_S_ACA 3 + + +#endif /* _LINUX_VIRTIO_SCSI_H */ -- cgit v1.2.3-70-g09d2 From a78e21dc5e9f896ecee5b1fbe189690dfcca38e1 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 8 Feb 2012 12:52:22 -0800 Subject: [SCSI] mpt2sas: spell "primitive" correctly in function prototype Signed-off-by: Andrew Morton Acked-by: "Nandigama, Nagalakshmi" Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 193e33e28e4..d953a57e779 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -5744,7 +5744,7 @@ _scsih_sas_enclosure_dev_status_change_event(struct MPT2SAS_ADAPTER *ioc, } /** - * _scsih_sas_broadcast_primative_event - handle broadcast events + * _scsih_sas_broadcast_primitive_event - handle broadcast events * @ioc: per adapter object * @fw_event: The fw_event_work object * Context: user. @@ -5752,7 +5752,7 @@ _scsih_sas_enclosure_dev_status_change_event(struct MPT2SAS_ADAPTER *ioc, * Return nothing. */ static void -_scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, +_scsih_sas_broadcast_primitive_event(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { struct scsi_cmnd *scmd; @@ -7263,7 +7263,7 @@ _firmware_event_work(struct work_struct *work) fw_event); break; case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: - _scsih_sas_broadcast_primative_event(ioc, + _scsih_sas_broadcast_primitive_event(ioc, fw_event); break; case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: -- cgit v1.2.3-70-g09d2 From 18a4d0a22ed6c54b67af7718c305cd010f09ddf8 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Thu, 9 Feb 2012 13:48:53 -0500 Subject: [SCSI] Handle disk devices which can not process medium access commands We have experienced several devices which fail in a fashion we do not currently handle gracefully in SCSI. After a failure these devices will respond to the SCSI primary command set (INQUIRY, TEST UNIT READY, etc.) but any command accessing the storage medium will time out. The following patch adds an callback that can be used by upper level drivers to inspect the results of an error handling command. This in turn has been used to implement additional checking in the SCSI disk driver. If a medium access command fails twice but TEST UNIT READY succeeds both times in the subsequent error handling we will offline the device. The maximum number of failed commands required to take a device offline can be tweaked in sysfs. Also add a new error flag to scsi_debug which allows this scenario to be easily reproduced. [jejb: fix up integer parsing to use kstrtouint] Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- drivers/scsi/scsi.c | 6 ---- drivers/scsi/scsi_debug.c | 4 +++ drivers/scsi/scsi_error.c | 12 +++++-- drivers/scsi/sd.c | 82 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/sd.h | 35 ++++++++++++++++++++ include/scsi/scsi_cmnd.h | 6 ++++ include/scsi/scsi_driver.h | 1 + 7 files changed, 137 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 2aeb2e9c4d3..07322ecff90 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -782,12 +782,6 @@ static void scsi_done(struct scsi_cmnd *cmd) blk_complete_request(cmd->request); } -/* Move this to a header if it becomes more generally useful */ -static struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd) -{ - return *(struct scsi_driver **)cmd->request->rq_disk->private_data; -} - /** * scsi_finish_command - cleanup and pass command back to upper layer * @cmd: the command diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index d2fd0efca56..8917154d96c 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -126,6 +126,7 @@ static const char * scsi_debug_version_date = "20100324"; #define SCSI_DEBUG_OPT_TRANSPORT_ERR 16 #define SCSI_DEBUG_OPT_DIF_ERR 32 #define SCSI_DEBUG_OPT_DIX_ERR 64 +#define SCSI_DEBUG_OPT_MAC_TIMEOUT 128 /* When "every_nth" > 0 then modulo "every_nth" commands: * - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set * - a RECOVERED_ERROR is simulated on successful read and write @@ -3615,6 +3616,9 @@ int scsi_debug_queuecommand_lck(struct scsi_cmnd *SCpnt, done_funct_t done) scsi_debug_every_nth = -1; if (SCSI_DEBUG_OPT_TIMEOUT & scsi_debug_opts) return 0; /* ignore command causing timeout */ + else if (SCSI_DEBUG_OPT_MAC_TIMEOUT & scsi_debug_opts && + scsi_medium_access_command(SCpnt)) + return 0; /* time out reads and writes */ else if (SCSI_DEBUG_OPT_RECOVERED_ERR & scsi_debug_opts) inj_recovered = 1; /* to reads and writes below */ else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & scsi_debug_opts) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index f66e90db3be..2cfcbffa41f 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -141,11 +142,11 @@ enum blk_eh_timer_return scsi_times_out(struct request *req) else if (host->hostt->eh_timed_out) rtn = host->hostt->eh_timed_out(scmd); + scmd->result |= DID_TIME_OUT << 16; + if (unlikely(rtn == BLK_EH_NOT_HANDLED && - !scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD))) { - scmd->result |= DID_TIME_OUT << 16; + !scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD))) rtn = BLK_EH_HANDLED; - } return rtn; } @@ -778,6 +779,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, int cmnd_size, int timeout, unsigned sense_bytes) { struct scsi_device *sdev = scmd->device; + struct scsi_driver *sdrv = scsi_cmd_to_driver(scmd); struct Scsi_Host *shost = sdev->host; DECLARE_COMPLETION_ONSTACK(done); unsigned long timeleft; @@ -832,6 +834,10 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, } scsi_eh_restore_cmnd(scmd, &ses); + + if (sdrv->eh_action) + rtn = sdrv->eh_action(scmd, cmnd, cmnd_size, rtn); + return rtn; } diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 8c525aa1b85..bd17cf8af01 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -107,6 +107,7 @@ static int sd_suspend(struct device *, pm_message_t state); static int sd_resume(struct device *); static void sd_rescan(struct device *); static int sd_done(struct scsi_cmnd *); +static int sd_eh_action(struct scsi_cmnd *, unsigned char *, int, int); static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer); static void scsi_disk_release(struct device *cdev); static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *); @@ -346,6 +347,31 @@ sd_store_provisioning_mode(struct device *dev, struct device_attribute *attr, return count; } +static ssize_t +sd_show_max_medium_access_timeouts(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct scsi_disk *sdkp = to_scsi_disk(dev); + + return snprintf(buf, 20, "%u\n", sdkp->max_medium_access_timeouts); +} + +static ssize_t +sd_store_max_medium_access_timeouts(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct scsi_disk *sdkp = to_scsi_disk(dev); + int err; + + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + + err = kstrtouint(buf, 10, &sdkp->max_medium_access_timeouts); + + return err ? err : count; +} + static struct device_attribute sd_disk_attrs[] = { __ATTR(cache_type, S_IRUGO|S_IWUSR, sd_show_cache_type, sd_store_cache_type), @@ -360,6 +386,9 @@ static struct device_attribute sd_disk_attrs[] = { __ATTR(thin_provisioning, S_IRUGO, sd_show_thin_provisioning, NULL), __ATTR(provisioning_mode, S_IRUGO|S_IWUSR, sd_show_provisioning_mode, sd_store_provisioning_mode), + __ATTR(max_medium_access_timeouts, S_IRUGO|S_IWUSR, + sd_show_max_medium_access_timeouts, + sd_store_max_medium_access_timeouts), __ATTR_NULL, }; @@ -382,6 +411,7 @@ static struct scsi_driver sd_template = { }, .rescan = sd_rescan, .done = sd_done, + .eh_action = sd_eh_action, }; /* @@ -1313,6 +1343,55 @@ static const struct block_device_operations sd_fops = { .unlock_native_capacity = sd_unlock_native_capacity, }; +/** + * sd_eh_action - error handling callback + * @scmd: sd-issued command that has failed + * @eh_cmnd: The command that was sent during error handling + * @eh_cmnd_len: Length of eh_cmnd in bytes + * @eh_disp: The recovery disposition suggested by the midlayer + * + * This function is called by the SCSI midlayer upon completion of + * an error handling command (TEST UNIT READY, START STOP UNIT, + * etc.) The command sent to the device by the error handler is + * stored in eh_cmnd. The result of sending the eh command is + * passed in eh_disp. + **/ +static int sd_eh_action(struct scsi_cmnd *scmd, unsigned char *eh_cmnd, + int eh_cmnd_len, int eh_disp) +{ + struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk); + + if (!scsi_device_online(scmd->device) || + !scsi_medium_access_command(scmd)) + return eh_disp; + + /* + * The device has timed out executing a medium access command. + * However, the TEST UNIT READY command sent during error + * handling completed successfully. Either the device is in the + * process of recovering or has it suffered an internal failure + * that prevents access to the storage medium. + */ + if (host_byte(scmd->result) == DID_TIME_OUT && eh_disp == SUCCESS && + eh_cmnd_len && eh_cmnd[0] == TEST_UNIT_READY) + sdkp->medium_access_timed_out++; + + /* + * If the device keeps failing read/write commands but TEST UNIT + * READY always completes successfully we assume that medium + * access is no longer possible and take the device offline. + */ + if (sdkp->medium_access_timed_out >= sdkp->max_medium_access_timeouts) { + scmd_printk(KERN_ERR, scmd, + "Medium access timeout failure. Offlining disk!\n"); + scsi_device_set_state(scmd->device, SDEV_OFFLINE); + + return FAILED; + } + + return eh_disp; +} + static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd) { u64 start_lba = blk_rq_pos(scmd->request); @@ -1402,6 +1481,8 @@ static int sd_done(struct scsi_cmnd *SCpnt) (!sense_valid || sense_deferred)) goto out; + sdkp->medium_access_timed_out = 0; + switch (sshdr.sense_key) { case HARDWARE_ERROR: case MEDIUM_ERROR: @@ -2523,6 +2604,7 @@ static void sd_probe_async(void *data, async_cookie_t cookie) sdkp->RCD = 0; sdkp->ATO = 0; sdkp->first_scan = 1; + sdkp->max_medium_access_timeouts = SD_MAX_MEDIUM_TIMEOUTS; sd_revalidate_disk(gd); diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 4163f2910e3..f703f4827b6 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -20,6 +20,7 @@ */ #define SD_MAX_RETRIES 5 #define SD_PASSTHROUGH_RETRIES 1 +#define SD_MAX_MEDIUM_TIMEOUTS 2 /* * Size of the initial data buffer for mode and read capacity data @@ -59,6 +60,8 @@ struct scsi_disk { u32 unmap_alignment; u32 index; unsigned int physical_block_size; + unsigned int max_medium_access_timeouts; + unsigned int medium_access_timed_out; u8 media_present; u8 write_prot; u8 protection_type;/* Data Integrity Field */ @@ -88,6 +91,38 @@ static inline struct scsi_disk *scsi_disk(struct gendisk *disk) (sdsk)->disk->disk_name, ##a) : \ sdev_printk(prefix, (sdsk)->device, fmt, ##a) +static inline int scsi_medium_access_command(struct scsi_cmnd *scmd) +{ + switch (scmd->cmnd[0]) { + case READ_6: + case READ_10: + case READ_12: + case READ_16: + case SYNCHRONIZE_CACHE: + case VERIFY: + case VERIFY_12: + case VERIFY_16: + case WRITE_6: + case WRITE_10: + case WRITE_12: + case WRITE_16: + case WRITE_SAME: + case WRITE_SAME_16: + case UNMAP: + return 1; + case VARIABLE_LENGTH_CMD: + switch (scmd->cmnd[9]) { + case READ_32: + case VERIFY_32: + case WRITE_32: + case WRITE_SAME_32: + return 1; + } + } + + return 0; +} + /* * A DIF-capable target device can be formatted with different * protection schemes. Currently 0 through 3 are defined: diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 9be0128bf30..377df4a2851 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -10,6 +10,7 @@ struct Scsi_Host; struct scsi_device; +struct scsi_driver; /* * MAX_COMMAND_SIZE is: @@ -131,6 +132,11 @@ struct scsi_cmnd { unsigned char tag; /* SCSI-II queued command tag */ }; +static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd) +{ + return *(struct scsi_driver **)cmd->request->rq_disk->private_data; +} + extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t); extern struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *, gfp_t); extern void scsi_put_command(struct scsi_cmnd *); diff --git a/include/scsi/scsi_driver.h b/include/scsi/scsi_driver.h index 9fd6702f02e..d443aa06a72 100644 --- a/include/scsi/scsi_driver.h +++ b/include/scsi/scsi_driver.h @@ -16,6 +16,7 @@ struct scsi_driver { void (*rescan)(struct device *); int (*done)(struct scsi_cmnd *); + int (*eh_action)(struct scsi_cmnd *, unsigned char *, int, int); }; #define to_scsi_driver(drv) \ container_of((drv), struct scsi_driver, gendrv) -- cgit v1.2.3-70-g09d2 From 95ac7fd189b7e81a200b4d00b2bb6669b31acf3a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Nov 2011 17:59:45 -0800 Subject: [SCSI] libsas: remove unused ata_task_resp fields Commit 1e34c838 "[SCSI] libsas: remove spurious sata control register read/write" removed the routines to fake the presence of the sata control registers, now remove the unused data structure fields to kill any remaining confusion. Acked-by: Jack Wang Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 4 ---- include/scsi/libsas.h | 7 ------- 2 files changed, 11 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index db9238f2ecb..83118d0b6d0 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -121,10 +121,6 @@ static void sas_ata_task_done(struct sas_task *task) if (unlikely(link->eh_info.err_mask)) qc->flags |= ATA_QCFLAG_FAILED; } - - dev->sata_dev.sstatus = resp->sstatus; - dev->sata_dev.serror = resp->serror; - dev->sata_dev.scontrol = resp->scontrol; } else { ac = sas_to_ata_err(stat); if (ac) { diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 6a308d42d98..6e64b038c64 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -171,9 +171,6 @@ struct sata_device { struct ata_port *ap; struct ata_host ata_host; struct ata_taskfile tf; - u32 sstatus; - u32 serror; - u32 scontrol; }; /* ---------- Domain device ---------- */ @@ -487,10 +484,6 @@ enum exec_status { struct ata_task_resp { u16 frame_len; u8 ending_fis[24]; /* dev to host or data-in */ - u32 sstatus; - u32 serror; - u32 scontrol; - u32 sactive; }; #define SAS_STATUS_BUF_SIZE 96 -- cgit v1.2.3-70-g09d2 From 6f4e75a49fd07d707995865493b9f452302ae36b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Nov 2011 17:59:46 -0800 Subject: [SCSI] libsas: kill sas_slave_destroy Per commit 3e4ec344 "libata: kill ATA_FLAG_DISABLED" needing to set ATA_DEV_NONE is a holdover from before libsas converted to the "new-style" ata-eh. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/aic94xx/aic94xx_init.c | 1 - drivers/scsi/isci/init.c | 1 - drivers/scsi/libsas/sas_scsi_host.c | 9 --------- drivers/scsi/mvsas/mv_init.c | 1 - drivers/scsi/pm8001/pm8001_init.c | 1 - include/scsi/libsas.h | 1 - 6 files changed, 14 deletions(-) diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c index d5ff142c93a..8db4e727628 100644 --- a/drivers/scsi/aic94xx/aic94xx_init.c +++ b/drivers/scsi/aic94xx/aic94xx_init.c @@ -68,7 +68,6 @@ static struct scsi_host_template aic94xx_sht = { .queuecommand = sas_queuecommand, .target_alloc = sas_target_alloc, .slave_configure = sas_slave_configure, - .slave_destroy = sas_slave_destroy, .scan_finished = asd_scan_finished, .scan_start = asd_scan_start, .change_queue_depth = sas_change_queue_depth, diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 6b911e0aea3..7ba236e9fab 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -154,7 +154,6 @@ static struct scsi_host_template isci_sht = { .queuecommand = sas_queuecommand, .target_alloc = sas_target_alloc, .slave_configure = sas_slave_configure, - .slave_destroy = sas_slave_destroy, .scan_finished = isci_host_scan_finished, .scan_start = isci_host_scan_start, .change_queue_depth = sas_change_queue_depth, diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index b6e233d9a0a..e95e5e17bd8 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -797,14 +797,6 @@ int sas_slave_configure(struct scsi_device *scsi_dev) return 0; } -void sas_slave_destroy(struct scsi_device *scsi_dev) -{ - struct domain_device *dev = sdev_to_domain_dev(scsi_dev); - - if (dev_is_sata(dev)) - sas_to_ata_dev(dev)->class = ATA_DEV_NONE; -} - int sas_change_queue_depth(struct scsi_device *sdev, int depth, int reason) { struct domain_device *dev = sdev_to_domain_dev(sdev); @@ -1108,7 +1100,6 @@ EXPORT_SYMBOL_GPL(sas_request_addr); EXPORT_SYMBOL_GPL(sas_queuecommand); EXPORT_SYMBOL_GPL(sas_target_alloc); EXPORT_SYMBOL_GPL(sas_slave_configure); -EXPORT_SYMBOL_GPL(sas_slave_destroy); EXPORT_SYMBOL_GPL(sas_change_queue_depth); EXPORT_SYMBOL_GPL(sas_change_queue_type); EXPORT_SYMBOL_GPL(sas_bios_param); diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c index 6f589195746..d45878b3125 100644 --- a/drivers/scsi/mvsas/mv_init.c +++ b/drivers/scsi/mvsas/mv_init.c @@ -60,7 +60,6 @@ static struct scsi_host_template mvs_sht = { .queuecommand = sas_queuecommand, .target_alloc = sas_target_alloc, .slave_configure = sas_slave_configure, - .slave_destroy = sas_slave_destroy, .scan_finished = mvs_scan_finished, .scan_start = mvs_scan_start, .change_queue_depth = sas_change_queue_depth, diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index c21a2163f9f..bd165ea6191 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -62,7 +62,6 @@ static struct scsi_host_template pm8001_sht = { .queuecommand = sas_queuecommand, .target_alloc = sas_target_alloc, .slave_configure = sas_slave_configure, - .slave_destroy = sas_slave_destroy, .scan_finished = pm8001_scan_finished, .scan_start = pm8001_scan_start, .change_queue_depth = sas_change_queue_depth, diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 6e64b038c64..2b14348336d 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -625,7 +625,6 @@ extern int sas_queuecommand(struct Scsi_Host * ,struct scsi_cmnd *); extern int sas_target_alloc(struct scsi_target *); extern int sas_slave_alloc(struct scsi_device *); extern int sas_slave_configure(struct scsi_device *); -extern void sas_slave_destroy(struct scsi_device *); extern int sas_change_queue_depth(struct scsi_device *, int new_depth, int reason); extern int sas_change_queue_type(struct scsi_device *, int qt); -- cgit v1.2.3-70-g09d2 From 735f7d2fedf57380214221be7bed7f62d729e262 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Nov 2011 17:59:47 -0800 Subject: [SCSI] libsas: fix domain_device leak Arrange for the deallocation of a struct domain_device object when it no longer has: 1/ any children 2/ references by any scsi_targets 3/ references by a lldd The comment about domain_device lifetime in Documentation/scsi/libsas.txt is stale as it appears mainline never had a version of a struct domain_device that was registered as a kobject. We now manage domain_device reference counts on behalf of external agents. Reviewed-by: Jack Wang Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- Documentation/scsi/libsas.txt | 15 --------------- drivers/scsi/libsas/sas_discover.c | 36 ++++++++++++++++++++++++------------ drivers/scsi/libsas/sas_expander.c | 10 ++++++---- drivers/scsi/libsas/sas_internal.h | 19 +++++++++++++++++++ drivers/scsi/libsas/sas_scsi_host.c | 16 ++++++---------- include/scsi/libsas.h | 1 + 6 files changed, 56 insertions(+), 41 deletions(-) diff --git a/Documentation/scsi/libsas.txt b/Documentation/scsi/libsas.txt index aa54f54c4a5..3cc9c7843e1 100644 --- a/Documentation/scsi/libsas.txt +++ b/Documentation/scsi/libsas.txt @@ -398,21 +398,6 @@ struct sas_task { task_done -- callback when the task has finished execution }; -When an external entity, entity other than the LLDD or the -SAS Layer, wants to work with a struct domain_device, it -_must_ call kobject_get() when getting a handle on the -device and kobject_put() when it is done with the device. - -This does two things: - A) implements proper kfree() for the device; - B) increments/decrements the kref for all players: - domain_device - all domain_device's ... (if past an expander) - port - host adapter - pci device - and up the ladder, etc. - DISCOVERY --------- diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 54a5199ceb5..4e649306ef4 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -36,8 +36,6 @@ void sas_init_dev(struct domain_device *dev) { - INIT_LIST_HEAD(&dev->siblings); - INIT_LIST_HEAD(&dev->dev_list_node); switch (dev->dev_type) { case SAS_END_DEV: break; @@ -73,14 +71,14 @@ static int sas_get_port_device(struct asd_sas_port *port) struct sas_rphy *rphy; struct domain_device *dev; - dev = kzalloc(sizeof(*dev), GFP_KERNEL); + dev = sas_alloc_device(); if (!dev) return -ENOMEM; spin_lock_irqsave(&port->phy_list_lock, flags); if (list_empty(&port->phy_list)) { spin_unlock_irqrestore(&port->phy_list_lock, flags); - kfree(dev); + sas_put_device(dev); return -ENODEV; } phy = container_of(port->phy_list.next, struct asd_sas_phy, port_phy_el); @@ -130,7 +128,7 @@ static int sas_get_port_device(struct asd_sas_port *port) } if (!rphy) { - kfree(dev); + sas_put_device(dev); return -ENODEV; } rphy->identify.phy_identifier = phy->phy->identify.phy_identifier; @@ -173,6 +171,7 @@ int sas_notify_lldd_dev_found(struct domain_device *dev) dev_name(sas_ha->dev), SAS_ADDR(dev->sas_addr), res); } + kref_get(&dev->kref); } return res; } @@ -184,8 +183,10 @@ void sas_notify_lldd_dev_gone(struct domain_device *dev) struct Scsi_Host *shost = sas_ha->core.shost; struct sas_internal *i = to_sas_internal(shost->transportt); - if (i->dft->lldd_dev_gone) + if (i->dft->lldd_dev_gone) { i->dft->lldd_dev_gone(dev); + sas_put_device(dev); + } } /* ---------- Common/dispatchers ---------- */ @@ -219,6 +220,20 @@ out_err2: /* ---------- Device registration and unregistration ---------- */ +void sas_free_device(struct kref *kref) +{ + struct domain_device *dev = container_of(kref, typeof(*dev), kref); + + if (dev->parent) + sas_put_device(dev->parent); + + /* remove the phys and ports, everything else should be gone */ + if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) + kfree(dev->ex_dev.ex_phy); + + kfree(dev); +} + static void sas_unregister_common_dev(struct asd_sas_port *port, struct domain_device *dev) { sas_notify_lldd_dev_gone(dev); @@ -230,6 +245,8 @@ static void sas_unregister_common_dev(struct asd_sas_port *port, struct domain_d spin_lock_irq(&port->dev_list_lock); list_del_init(&dev->dev_list_node); spin_unlock_irq(&port->dev_list_lock); + + sas_put_device(dev); } void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *dev) @@ -239,11 +256,6 @@ void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *dev) sas_rphy_delete(dev->rphy); dev->rphy = NULL; } - if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) { - /* remove the phys and ports, everything else should be gone */ - kfree(dev->ex_dev.ex_phy); - dev->ex_dev.ex_phy = NULL; - } sas_unregister_common_dev(port, dev); } @@ -322,7 +334,7 @@ static void sas_discover_domain(struct work_struct *work) list_del_init(&dev->dev_list_node); spin_unlock_irq(&port->dev_list_lock); - kfree(dev); /* not kobject_register-ed yet */ + sas_put_device(dev); port->port_dev = NULL; } diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 1b831c55ec6..15d2239a378 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -657,10 +657,11 @@ static struct domain_device *sas_ex_discover_end_dev( if (phy->attached_sata_host || phy->attached_sata_ps) return NULL; - child = kzalloc(sizeof(*child), GFP_KERNEL); + child = sas_alloc_device(); if (!child) return NULL; + kref_get(&parent->kref); child->parent = parent; child->port = parent->port; child->iproto = phy->attached_iproto; @@ -762,7 +763,7 @@ static struct domain_device *sas_ex_discover_end_dev( sas_port_delete(phy->port); out_err: phy->port = NULL; - kfree(child); + sas_put_device(child); return NULL; } @@ -809,7 +810,7 @@ static struct domain_device *sas_ex_discover_expander( phy->attached_phy_id); return NULL; } - child = kzalloc(sizeof(*child), GFP_KERNEL); + child = sas_alloc_device(); if (!child) return NULL; @@ -835,6 +836,7 @@ static struct domain_device *sas_ex_discover_expander( child->rphy = rphy; edev = rphy_to_expander_device(rphy); child->dev_type = phy->attached_dev_type; + kref_get(&parent->kref); child->parent = parent; child->port = port; child->iproto = phy->attached_iproto; @@ -858,7 +860,7 @@ static struct domain_device *sas_ex_discover_expander( spin_lock_irq(&parent->port->dev_list_lock); list_del(&child->dev_list_node); spin_unlock_irq(&parent->port->dev_list_lock); - kfree(child); + sas_put_device(child); return NULL; } list_add_tail(&child->siblings, &parent->ex_dev.children); diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 14e21b5fb8b..0d43408196f 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -76,6 +76,8 @@ struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy); void sas_hae_reset(struct work_struct *work); +void sas_free_device(struct kref *kref); + #ifdef CONFIG_SCSI_SAS_HOST_SMP extern int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, struct request *rsp); @@ -161,4 +163,21 @@ static inline void sas_add_parent_port(struct domain_device *dev, int phy_id) sas_port_add_phy(ex->parent_port, ex_phy->phy); } +static inline struct domain_device *sas_alloc_device(void) +{ + struct domain_device *dev = kzalloc(sizeof(*dev), GFP_KERNEL); + + if (dev) { + INIT_LIST_HEAD(&dev->siblings); + INIT_LIST_HEAD(&dev->dev_list_node); + kref_init(&dev->kref); + } + return dev; +} + +static inline void sas_put_device(struct domain_device *dev) +{ + kref_put(&dev->kref, sas_free_device); +} + #endif /* _SAS_INTERNAL_H_ */ diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index e95e5e17bd8..2a163c73fd8 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -737,16 +737,10 @@ struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy) return found_dev; } -static inline struct domain_device *sas_find_target(struct scsi_target *starget) -{ - struct sas_rphy *rphy = dev_to_rphy(starget->dev.parent); - - return sas_find_dev_by_rphy(rphy); -} - int sas_target_alloc(struct scsi_target *starget) { - struct domain_device *found_dev = sas_find_target(starget); + struct sas_rphy *rphy = dev_to_rphy(starget->dev.parent); + struct domain_device *found_dev = sas_find_dev_by_rphy(rphy); int res; if (!found_dev) @@ -758,6 +752,7 @@ int sas_target_alloc(struct scsi_target *starget) return res; } + kref_get(&found_dev->kref); starget->hostdata = found_dev; return 0; } @@ -1047,7 +1042,7 @@ int sas_slave_alloc(struct scsi_device *scsi_dev) void sas_target_destroy(struct scsi_target *starget) { - struct domain_device *found_dev = sas_find_target(starget); + struct domain_device *found_dev = starget->hostdata; if (!found_dev) return; @@ -1055,7 +1050,8 @@ void sas_target_destroy(struct scsi_target *starget) if (dev_is_sata(found_dev)) ata_sas_port_destroy(found_dev->sata_dev.ap); - return; + starget->hostdata = NULL; + sas_put_device(found_dev); } static void sas_parse_addr(u8 *sas_addr, const char *p) diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 2b14348336d..7ecb5c1c085 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -206,6 +206,7 @@ struct domain_device { void *lldd_dev; int gone; + struct kref kref; }; struct sas_discovery_event { -- cgit v1.2.3-70-g09d2 From 756f173fb5fa90ec15222e80fb579288be7794fd Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Nov 2011 17:59:48 -0800 Subject: [SCSI] libsas: fix leak of dev->sata_dev.identify_[packet_]device These are never freed in the nominal path. A domain_device has a different lifetime than a sas_rphy we need a dev->rphy independent way of identifying sata devices. Reviewed-by: Jack Wang Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_discover.c | 6 ++++++ include/scsi/sas_ata.h | 3 ++- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 4e649306ef4..dc52b1fa218 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -30,6 +30,7 @@ #include #include +#include #include "../scsi_sas_internal.h" /* ---------- Basic task processing for discovery purposes ---------- */ @@ -231,6 +232,11 @@ void sas_free_device(struct kref *kref) if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) kfree(dev->ex_dev.ex_phy); + if (dev_is_sata(dev)) { + kfree(dev->sata_dev.identify_device); + kfree(dev->sata_dev.identify_packet_device); + } + kfree(dev); } diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h index 9c159f74c6d..7d5013f8653 100644 --- a/include/scsi/sas_ata.h +++ b/include/scsi/sas_ata.h @@ -32,7 +32,8 @@ static inline int dev_is_sata(struct domain_device *dev) { - return (dev->rphy->identify.target_port_protocols & SAS_PROTOCOL_SATA); + return dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM || + dev->dev_type == SATA_PM_PORT; } int sas_ata_init_host_and_port(struct domain_device *found_dev, -- cgit v1.2.3-70-g09d2 From b15ebe0b5d0b95aeb1d84cae3649df1e0e065e9b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Nov 2011 17:59:49 -0800 Subject: [SCSI] libsas: replace event locks with atomic bitops The locks only served to make sure the pending event bitmask was updated consistently. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_discover.c | 10 +++------- drivers/scsi/libsas/sas_event.c | 8 +++----- drivers/scsi/libsas/sas_init.c | 3 +-- drivers/scsi/libsas/sas_internal.h | 32 +++++++------------------------- drivers/scsi/libsas/sas_phy.c | 12 ++++-------- drivers/scsi/libsas/sas_port.c | 15 +++++---------- include/scsi/libsas.h | 3 --- 7 files changed, 23 insertions(+), 60 deletions(-) diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index dc52b1fa218..ed041189e76 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -295,8 +295,7 @@ static void sas_discover_domain(struct work_struct *work) container_of(work, struct sas_discovery_event, work); struct asd_sas_port *port = ev->port; - sas_begin_event(DISCE_DISCOVER_DOMAIN, &port->disc.disc_event_lock, - &port->disc.pending); + clear_bit(DISCE_DISCOVER_DOMAIN, &port->disc.pending); if (port->port_dev) return; @@ -355,8 +354,7 @@ static void sas_revalidate_domain(struct work_struct *work) container_of(work, struct sas_discovery_event, work); struct asd_sas_port *port = ev->port; - sas_begin_event(DISCE_REVALIDATE_DOMAIN, &port->disc.disc_event_lock, - &port->disc.pending); + clear_bit(DISCE_REVALIDATE_DOMAIN, &port->disc.pending); SAS_DPRINTK("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id, task_pid_nr(current)); @@ -379,8 +377,7 @@ int sas_discover_event(struct asd_sas_port *port, enum discover_event ev) BUG_ON(ev >= DISC_NUM_EVENTS); - sas_queue_event(ev, &disc->disc_event_lock, &disc->pending, - &disc->disc_work[ev].work, port->ha); + sas_queue_event(ev, &disc->pending, &disc->disc_work[ev].work, port->ha); return 0; } @@ -400,7 +397,6 @@ void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *port) [DISCE_REVALIDATE_DOMAIN] = sas_revalidate_domain, }; - spin_lock_init(&disc->disc_event_lock); disc->pending = 0; for (i = 0; i < DISC_NUM_EVENTS; i++) { INIT_WORK(&disc->disc_work[i].work, sas_event_fns[i]); diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c index 9db30fb5caf..9c084bc09bb 100644 --- a/drivers/scsi/libsas/sas_event.c +++ b/drivers/scsi/libsas/sas_event.c @@ -30,7 +30,7 @@ static void notify_ha_event(struct sas_ha_struct *sas_ha, enum ha_event event) { BUG_ON(event >= HA_NUM_EVENTS); - sas_queue_event(event, &sas_ha->event_lock, &sas_ha->pending, + sas_queue_event(event, &sas_ha->pending, &sas_ha->ha_events[event].work, sas_ha); } @@ -40,7 +40,7 @@ static void notify_port_event(struct asd_sas_phy *phy, enum port_event event) BUG_ON(event >= PORT_NUM_EVENTS); - sas_queue_event(event, &ha->event_lock, &phy->port_events_pending, + sas_queue_event(event, &phy->port_events_pending, &phy->port_events[event].work, ha); } @@ -50,7 +50,7 @@ static void notify_phy_event(struct asd_sas_phy *phy, enum phy_event event) BUG_ON(event >= PHY_NUM_EVENTS); - sas_queue_event(event, &ha->event_lock, &phy->phy_events_pending, + sas_queue_event(event, &phy->phy_events_pending, &phy->phy_events[event].work, ha); } @@ -62,8 +62,6 @@ int sas_init_events(struct sas_ha_struct *sas_ha) int i; - spin_lock_init(&sas_ha->event_lock); - for (i = 0; i < HA_NUM_EVENTS; i++) { INIT_WORK(&sas_ha->ha_events[i].work, sas_ha_event_fns[i]); sas_ha->ha_events[i].ha = sas_ha; diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index d81c3b1989f..a435876f1f7 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -97,8 +97,7 @@ void sas_hae_reset(struct work_struct *work) container_of(work, struct sas_ha_event, work); struct sas_ha_struct *ha = ev->ha; - sas_begin_event(HAE_RESET, &ha->event_lock, - &ha->pending); + clear_bit(HAE_RESET, &ha->pending); } int sas_register_ha(struct sas_ha_struct *sas_ha) diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 0d43408196f..7fe4eded286 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -92,36 +92,18 @@ static inline int sas_smp_host_handler(struct Scsi_Host *shost, } #endif -static inline void sas_queue_event(int event, spinlock_t *lock, - unsigned long *pending, +static inline void sas_queue_event(int event, unsigned long *pending, struct work_struct *work, struct sas_ha_struct *sas_ha) { - unsigned long flags; + if (!test_and_set_bit(event, pending)) { + unsigned long flags; - spin_lock_irqsave(lock, flags); - if (test_bit(event, pending)) { - spin_unlock_irqrestore(lock, flags); - return; + spin_lock_irqsave(&sas_ha->state_lock, flags); + if (sas_ha->state != SAS_HA_UNREGISTERED) + scsi_queue_work(sas_ha->core.shost, work); + spin_unlock_irqrestore(&sas_ha->state_lock, flags); } - __set_bit(event, pending); - spin_unlock_irqrestore(lock, flags); - - spin_lock_irqsave(&sas_ha->state_lock, flags); - if (sas_ha->state != SAS_HA_UNREGISTERED) { - scsi_queue_work(sas_ha->core.shost, work); - } - spin_unlock_irqrestore(&sas_ha->state_lock, flags); -} - -static inline void sas_begin_event(int event, spinlock_t *lock, - unsigned long *pending) -{ - unsigned long flags; - - spin_lock_irqsave(lock, flags); - __clear_bit(event, pending); - spin_unlock_irqrestore(lock, flags); } static inline void sas_fill_in_rphy(struct domain_device *dev, diff --git a/drivers/scsi/libsas/sas_phy.c b/drivers/scsi/libsas/sas_phy.c index e0f5018e907..dcfd4a9105c 100644 --- a/drivers/scsi/libsas/sas_phy.c +++ b/drivers/scsi/libsas/sas_phy.c @@ -36,8 +36,7 @@ static void sas_phye_loss_of_signal(struct work_struct *work) container_of(work, struct asd_sas_event, work); struct asd_sas_phy *phy = ev->phy; - sas_begin_event(PHYE_LOSS_OF_SIGNAL, &phy->ha->event_lock, - &phy->phy_events_pending); + clear_bit(PHYE_LOSS_OF_SIGNAL, &phy->phy_events_pending); phy->error = 0; sas_deform_port(phy, 1); } @@ -48,8 +47,7 @@ static void sas_phye_oob_done(struct work_struct *work) container_of(work, struct asd_sas_event, work); struct asd_sas_phy *phy = ev->phy; - sas_begin_event(PHYE_OOB_DONE, &phy->ha->event_lock, - &phy->phy_events_pending); + clear_bit(PHYE_OOB_DONE, &phy->phy_events_pending); phy->error = 0; } @@ -63,8 +61,7 @@ static void sas_phye_oob_error(struct work_struct *work) struct sas_internal *i = to_sas_internal(sas_ha->core.shost->transportt); - sas_begin_event(PHYE_OOB_ERROR, &phy->ha->event_lock, - &phy->phy_events_pending); + clear_bit(PHYE_OOB_ERROR, &phy->phy_events_pending); sas_deform_port(phy, 1); @@ -95,8 +92,7 @@ static void sas_phye_spinup_hold(struct work_struct *work) struct sas_internal *i = to_sas_internal(sas_ha->core.shost->transportt); - sas_begin_event(PHYE_SPINUP_HOLD, &phy->ha->event_lock, - &phy->phy_events_pending); + clear_bit(PHYE_SPINUP_HOLD, &phy->phy_events_pending); phy->error = 0; i->dft->lldd_control_phy(phy, PHY_FUNC_RELEASE_SPINUP_HOLD, NULL); diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index 42fd1f25b66..a47c7a75327 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -213,8 +213,7 @@ void sas_porte_bytes_dmaed(struct work_struct *work) container_of(work, struct asd_sas_event, work); struct asd_sas_phy *phy = ev->phy; - sas_begin_event(PORTE_BYTES_DMAED, &phy->ha->event_lock, - &phy->port_events_pending); + clear_bit(PORTE_BYTES_DMAED, &phy->port_events_pending); sas_form_port(phy); } @@ -227,8 +226,7 @@ void sas_porte_broadcast_rcvd(struct work_struct *work) unsigned long flags; u32 prim; - sas_begin_event(PORTE_BROADCAST_RCVD, &phy->ha->event_lock, - &phy->port_events_pending); + clear_bit(PORTE_BROADCAST_RCVD, &phy->port_events_pending); spin_lock_irqsave(&phy->sas_prim_lock, flags); prim = phy->sas_prim; @@ -244,8 +242,7 @@ void sas_porte_link_reset_err(struct work_struct *work) container_of(work, struct asd_sas_event, work); struct asd_sas_phy *phy = ev->phy; - sas_begin_event(PORTE_LINK_RESET_ERR, &phy->ha->event_lock, - &phy->port_events_pending); + clear_bit(PORTE_LINK_RESET_ERR, &phy->port_events_pending); sas_deform_port(phy, 1); } @@ -256,8 +253,7 @@ void sas_porte_timer_event(struct work_struct *work) container_of(work, struct asd_sas_event, work); struct asd_sas_phy *phy = ev->phy; - sas_begin_event(PORTE_TIMER_EVENT, &phy->ha->event_lock, - &phy->port_events_pending); + clear_bit(PORTE_TIMER_EVENT, &phy->port_events_pending); sas_deform_port(phy, 1); } @@ -268,8 +264,7 @@ void sas_porte_hard_reset(struct work_struct *work) container_of(work, struct asd_sas_event, work); struct asd_sas_phy *phy = ev->phy; - sas_begin_event(PORTE_HARD_RESET, &phy->ha->event_lock, - &phy->port_events_pending); + clear_bit(PORTE_HARD_RESET, &phy->port_events_pending); sas_deform_port(phy, 1); } diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 7ecb5c1c085..de63a664b5e 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -215,7 +215,6 @@ struct sas_discovery_event { }; struct sas_discovery { - spinlock_t disc_event_lock; struct sas_discovery_event disc_work[DISC_NUM_EVENTS]; unsigned long pending; u8 fanout_sas_addr[8]; @@ -272,7 +271,6 @@ struct asd_sas_event { */ struct asd_sas_phy { /* private: */ - /* protected by ha->event_lock */ struct asd_sas_event port_events[PORT_NUM_EVENTS]; struct asd_sas_event phy_events[PHY_NUM_EVENTS]; @@ -337,7 +335,6 @@ enum sas_ha_state { struct sas_ha_struct { /* private: */ - spinlock_t event_lock; struct sas_ha_event ha_events[HA_NUM_EVENTS]; unsigned long pending; -- cgit v1.2.3-70-g09d2 From f8daa6e6d83f60a721752cb53433bfdc1503b45f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 19 Dec 2011 17:02:25 -0800 Subject: [SCSI] libsas: convert ha->state to flags In preparation for adding new states (SAS_HA_DRAINING, SAS_HA_FROZEN), convert ha->state into a set of flags. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_init.c | 4 ++-- drivers/scsi/libsas/sas_internal.h | 2 +- include/scsi/libsas.h | 3 +-- 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index a435876f1f7..da244e68fe6 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -112,7 +112,7 @@ int sas_register_ha(struct sas_ha_struct *sas_ha) else if (sas_ha->lldd_queue_size == -1) sas_ha->lldd_queue_size = 128; /* Sanity */ - sas_ha->state = SAS_HA_REGISTERED; + set_bit(SAS_HA_REGISTERED, &sas_ha->state); spin_lock_init(&sas_ha->state_lock); error = sas_register_phys(sas_ha); @@ -160,7 +160,7 @@ int sas_unregister_ha(struct sas_ha_struct *sas_ha) /* Set the state to unregistered to avoid further * events to be queued */ spin_lock_irqsave(&sas_ha->state_lock, flags); - sas_ha->state = SAS_HA_UNREGISTERED; + clear_bit(SAS_HA_REGISTERED, &sas_ha->state); spin_unlock_irqrestore(&sas_ha->state_lock, flags); scsi_flush_work(sas_ha->core.shost); diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 7fe4eded286..1fd84b3f091 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -100,7 +100,7 @@ static inline void sas_queue_event(int event, unsigned long *pending, unsigned long flags; spin_lock_irqsave(&sas_ha->state_lock, flags); - if (sas_ha->state != SAS_HA_UNREGISTERED) + if (test_bit(SAS_HA_REGISTERED, &sas_ha->state)) scsi_queue_work(sas_ha->core.shost, work); spin_unlock_irqrestore(&sas_ha->state_lock, flags); } diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index de63a664b5e..8e402d5a064 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -330,7 +330,6 @@ struct sas_ha_event { enum sas_ha_state { SAS_HA_REGISTERED, - SAS_HA_UNREGISTERED }; struct sas_ha_struct { @@ -338,7 +337,7 @@ struct sas_ha_struct { struct sas_ha_event ha_events[HA_NUM_EVENTS]; unsigned long pending; - enum sas_ha_state state; + unsigned long state; spinlock_t state_lock; struct scsi_core core; -- cgit v1.2.3-70-g09d2 From b1124cd3ec97406c767b90bf7e93ecd2d2915592 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 19 Dec 2011 16:42:34 -0800 Subject: [SCSI] libsas: introduce sas_drain_work() When an lldd invokes ->notify_port_event() it can trigger a chain of libsas events to: 1/ form the port and find the direct attached device 2/ if the attached device is an expander perform domain discovery A call to flush_workqueue() will only flush the initial port formation work. Currently libsas users need to call scsi_flush_work() up to the max depth of chain (which will grow from 2 to 3 when ata discovery is moved to its own discovery event). Instead of open coding multiple calls switch to use drain_workqueue() to flush sas work. drain_workqueue() does not handle new work submitted during the drain so libsas needs a bit of infrastructure to hold off unchained work submissions while a drain is in flight. A lldd ->notify() event is considered 'unchained' while a sas_discover_event() is 'chained'. As Tejun notes: "For now, I think it would be best to add private wrapper in libsas to support deferring unchained work items while draining." Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/aic94xx/aic94xx_init.c | 2 +- drivers/scsi/isci/host.c | 8 ++---- drivers/scsi/libsas/sas_discover.c | 21 +++++++++++++- drivers/scsi/libsas/sas_event.c | 55 +++++++++++++++++++++++++++++++++++++ drivers/scsi/libsas/sas_init.c | 9 ++++-- drivers/scsi/libsas/sas_internal.h | 14 ---------- drivers/scsi/mvsas/mv_sas.c | 2 +- drivers/scsi/pm8001/pm8001_sas.c | 4 ++- include/scsi/libsas.h | 4 +++ 9 files changed, 93 insertions(+), 26 deletions(-) diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c index 8db4e727628..2b3717f6d22 100644 --- a/drivers/scsi/aic94xx/aic94xx_init.c +++ b/drivers/scsi/aic94xx/aic94xx_init.c @@ -971,7 +971,7 @@ static int asd_scan_finished(struct Scsi_Host *shost, unsigned long time) if (time < HZ) return 0; /* Wait for discovery to finish */ - scsi_flush_work(shost); + sas_drain_work(SHOST_TO_SAS_HA(shost)); return 1; } diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 508aa8ce25b..e3cf3832c5b 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -650,15 +650,13 @@ static void isci_host_start_complete(struct isci_host *ihost, enum sci_status co int isci_host_scan_finished(struct Scsi_Host *shost, unsigned long time) { - struct isci_host *ihost = SHOST_TO_SAS_HA(shost)->lldd_ha; + struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); + struct isci_host *ihost = ha->lldd_ha; if (test_bit(IHOST_START_PENDING, &ihost->flags)) return 0; - /* todo: use sas_flush_discovery once it is upstream */ - scsi_flush_work(shost); - - scsi_flush_work(shost); + sas_drain_work(ha); dev_dbg(&ihost->pdev->dev, "%s: ihost->status = %d, time = %ld\n", diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index ed041189e76..32e01176604 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -367,6 +367,25 @@ static void sas_revalidate_domain(struct work_struct *work) /* ---------- Events ---------- */ +static void sas_chain_work(struct sas_ha_struct *ha, struct work_struct *work) +{ + /* chained work is not subject to SA_HA_DRAINING or SAS_HA_REGISTERED */ + scsi_queue_work(ha->core.shost, work); +} + +static void sas_chain_event(int event, unsigned long *pending, + struct work_struct *work, + struct sas_ha_struct *ha) +{ + if (!test_and_set_bit(event, pending)) { + unsigned long flags; + + spin_lock_irqsave(&ha->state_lock, flags); + sas_chain_work(ha, work); + spin_unlock_irqrestore(&ha->state_lock, flags); + } +} + int sas_discover_event(struct asd_sas_port *port, enum discover_event ev) { struct sas_discovery *disc; @@ -377,7 +396,7 @@ int sas_discover_event(struct asd_sas_port *port, enum discover_event ev) BUG_ON(ev >= DISC_NUM_EVENTS); - sas_queue_event(ev, &disc->pending, &disc->disc_work[ev].work, port->ha); + sas_chain_event(ev, &disc->pending, &disc->disc_work[ev].work, port->ha); return 0; } diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c index 9c084bc09bb..e5035aa4c2a 100644 --- a/drivers/scsi/libsas/sas_event.c +++ b/drivers/scsi/libsas/sas_event.c @@ -22,10 +22,65 @@ * */ +#include #include #include "sas_internal.h" #include "sas_dump.h" +static void sas_queue_work(struct sas_ha_struct *ha, struct work_struct *work) +{ + if (!test_bit(SAS_HA_REGISTERED, &ha->state)) + return; + + if (test_bit(SAS_HA_DRAINING, &ha->state)) + list_add(&work->entry, &ha->defer_q); + else + scsi_queue_work(ha->core.shost, work); +} + +static void sas_queue_event(int event, unsigned long *pending, + struct work_struct *work, + struct sas_ha_struct *ha) +{ + if (!test_and_set_bit(event, pending)) { + unsigned long flags; + + spin_lock_irqsave(&ha->state_lock, flags); + sas_queue_work(ha, work); + spin_unlock_irqrestore(&ha->state_lock, flags); + } +} + +int sas_drain_work(struct sas_ha_struct *ha) +{ + struct workqueue_struct *wq = ha->core.shost->work_q; + struct work_struct *w, *_w; + int err; + + err = mutex_lock_interruptible(&ha->drain_mutex); + if (err) + return err; + + set_bit(SAS_HA_DRAINING, &ha->state); + /* flush submitters */ + spin_lock_irq(&ha->state_lock); + spin_unlock_irq(&ha->state_lock); + + drain_workqueue(wq); + + spin_lock_irq(&ha->state_lock); + clear_bit(SAS_HA_DRAINING, &ha->state); + list_for_each_entry_safe(w, _w, &ha->defer_q, entry) { + list_del_init(&w->entry); + sas_queue_work(ha, w); + } + spin_unlock_irq(&ha->state_lock); + mutex_unlock(&ha->drain_mutex); + + return 0; +} +EXPORT_SYMBOL_GPL(sas_drain_work); + static void notify_ha_event(struct sas_ha_struct *sas_ha, enum ha_event event) { BUG_ON(event >= HA_NUM_EVENTS); diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index da244e68fe6..572b943d760 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -114,6 +114,8 @@ int sas_register_ha(struct sas_ha_struct *sas_ha) set_bit(SAS_HA_REGISTERED, &sas_ha->state); spin_lock_init(&sas_ha->state_lock); + mutex_init(&sas_ha->drain_mutex); + INIT_LIST_HEAD(&sas_ha->defer_q); error = sas_register_phys(sas_ha); if (error) { @@ -157,12 +159,13 @@ int sas_unregister_ha(struct sas_ha_struct *sas_ha) { unsigned long flags; - /* Set the state to unregistered to avoid further - * events to be queued */ + /* Set the state to unregistered to avoid further unchained + * events to be queued + */ spin_lock_irqsave(&sas_ha->state_lock, flags); clear_bit(SAS_HA_REGISTERED, &sas_ha->state); spin_unlock_irqrestore(&sas_ha->state_lock, flags); - scsi_flush_work(sas_ha->core.shost); + sas_drain_work(sas_ha); sas_unregister_ports(sas_ha); diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 1fd84b3f091..948ea64cc2e 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -92,20 +92,6 @@ static inline int sas_smp_host_handler(struct Scsi_Host *shost, } #endif -static inline void sas_queue_event(int event, unsigned long *pending, - struct work_struct *work, - struct sas_ha_struct *sas_ha) -{ - if (!test_and_set_bit(event, pending)) { - unsigned long flags; - - spin_lock_irqsave(&sas_ha->state_lock, flags); - if (test_bit(SAS_HA_REGISTERED, &sas_ha->state)) - scsi_queue_work(sas_ha->core.shost, work); - spin_unlock_irqrestore(&sas_ha->state_lock, flags); - } -} - static inline void sas_fill_in_rphy(struct domain_device *dev, struct sas_rphy *rphy) { diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c index a4884a57cf7..b118e632bc7 100644 --- a/drivers/scsi/mvsas/mv_sas.c +++ b/drivers/scsi/mvsas/mv_sas.c @@ -308,7 +308,7 @@ int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time) if (mvs_prv->scan_finished == 0) return 0; - scsi_flush_work(shost); + sas_drain_work(sha); return 1; } diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 9589fc941a8..50837933a1e 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -256,12 +256,14 @@ void pm8001_scan_start(struct Scsi_Host *shost) int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time) { + struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); + /* give the phy enabling interrupt event time to come in (1s * is empirically about all it takes) */ if (time < HZ) return 0; /* Wait for discovery to finish */ - scsi_flush_work(shost); + sas_drain_work(ha); return 1; } diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 8e402d5a064..42900fa95a0 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -330,6 +330,7 @@ struct sas_ha_event { enum sas_ha_state { SAS_HA_REGISTERED, + SAS_HA_DRAINING, }; struct sas_ha_struct { @@ -337,6 +338,8 @@ struct sas_ha_struct { struct sas_ha_event ha_events[HA_NUM_EVENTS]; unsigned long pending; + struct list_head defer_q; /* work queued while draining */ + struct mutex drain_mutex; unsigned long state; spinlock_t state_lock; @@ -657,6 +660,7 @@ int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd); extern void sas_target_destroy(struct scsi_target *); extern int sas_slave_alloc(struct scsi_device *); extern int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg); +extern int sas_drain_work(struct sas_ha_struct *ha); extern int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, struct request *req); -- cgit v1.2.3-70-g09d2 From 312d3e56119a4bc5c36a96818f87f650c069ddc2 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Nov 2011 17:59:50 -0800 Subject: [SCSI] libsas: remove ata_port.lock management duties from lldds Each libsas driver (mvsas, pm8001, and isci) has invented a different method for managing the ap->lock. The lock is held by the ata ->queuecommand() path. mvsas drops it prior to acquiring any internal locks which allows it to hold its internal lock across calls to task->task_done(). This capability is important as it is the only way the driver can flush task->task_done() instances to guarantee that it no longer has any in-flight references to a domain_device at ->lldd_dev_gone() time. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/request.c | 3 +-- drivers/scsi/isci/task.c | 6 ++---- drivers/scsi/isci/task.h | 36 ------------------------------------ drivers/scsi/libsas/sas_ata.c | 36 +++++++++++++++++++++++------------- drivers/scsi/libsas/sas_scsi_host.c | 6 ++---- drivers/scsi/mvsas/mv_sas.c | 6 ------ drivers/scsi/pm8001/pm8001_sas.c | 6 +----- 7 files changed, 29 insertions(+), 70 deletions(-) diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 751368b46b4..788daeedc89 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -3796,8 +3796,7 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide /* Cause this task to be scheduled in the SCSI error * handler thread. */ - isci_execpath_callback(ihost, task, - sas_task_abort); + sas_task_abort(task); /* Change the status, since we are holding * the I/O until it is managed by the SCSI diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index f5a3f7d2bda..4bd88ef83cd 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -96,8 +96,7 @@ static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, __func__, task, response, status); task->lldd_task = NULL; - - isci_execpath_callback(ihost, task, task->task_done); + task->task_done(task); break; case isci_perform_aborted_io_completion: @@ -117,8 +116,7 @@ static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, "%s: Error - task = %p, response=%d, " "status=%d\n", __func__, task, response, status); - - isci_execpath_callback(ihost, task, sas_task_abort); + sas_task_abort(task); break; default: diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index 1b27b3797c6..bb472c33952 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -321,40 +321,4 @@ isci_task_set_completion_status( return task_notification_selection; } -/** -* isci_execpath_callback() - This function is called from the task -* execute path when the task needs to callback libsas about the submit-time -* task failure. The callback occurs either through the task's done function -* or through sas_task_abort. In the case of regular non-discovery SATA/STP I/O -* requests, libsas takes the host lock before calling execute task. Therefore -* in this situation the host lock must be managed before calling the func. -* -* @ihost: This parameter is the controller to which the I/O request was sent. -* @task: This parameter is the I/O request. -* @func: This parameter is the function to call in the correct context. -* @status: This parameter is the status code for the completed task. -* -*/ -static inline void isci_execpath_callback(struct isci_host *ihost, - struct sas_task *task, - void (*func)(struct sas_task *)) -{ - struct domain_device *dev = task->dev; - - if (dev_is_sata(dev) && task->uldd_task) { - unsigned long flags; - - /* Since we are still in the submit path, and since - * libsas takes the host lock on behalf of SATA - * devices before I/O starts (in the non-discovery case), - * we need to unlock before we can call the callback function. - */ - raw_local_irq_save(flags); - spin_unlock(dev->sata_dev.ap->lock); - func(task); - spin_lock(dev->sata_dev.ap->lock); - raw_local_irq_restore(flags); - } else - func(task); -} #endif /* !defined(_SCI_TASK_H_) */ diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 83118d0b6d0..81ce39d166d 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -166,23 +166,30 @@ qc_already_gone: static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) { - int res; + unsigned long flags; struct sas_task *task; - struct domain_device *dev = qc->ap->private_data; + struct scatterlist *sg; + int ret = AC_ERR_SYSTEM; + unsigned int si, xfer = 0; + struct ata_port *ap = qc->ap; + struct domain_device *dev = ap->private_data; struct sas_ha_struct *sas_ha = dev->port->ha; struct Scsi_Host *host = sas_ha->core.shost; struct sas_internal *i = to_sas_internal(host->transportt); - struct scatterlist *sg; - unsigned int xfer = 0; - unsigned int si; + + /* TODO: audit callers to ensure they are ready for qc_issue to + * unconditionally re-enable interrupts + */ + local_irq_save(flags); + spin_unlock(ap->lock); /* If the device fell off, no sense in issuing commands */ if (dev->gone) - return AC_ERR_SYSTEM; + goto out; task = sas_alloc_task(GFP_ATOMIC); if (!task) - return AC_ERR_SYSTEM; + goto out; task->dev = dev; task->task_proto = SAS_PROTOCOL_STP; task->task_done = sas_ata_task_done; @@ -227,21 +234,24 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) ASSIGN_SAS_TASK(qc->scsicmd, task); if (sas_ha->lldd_max_execute_num < 2) - res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC); + ret = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC); else - res = sas_queue_up(task); + ret = sas_queue_up(task); /* Examine */ - if (res) { - SAS_DPRINTK("lldd_execute_task returned: %d\n", res); + if (ret) { + SAS_DPRINTK("lldd_execute_task returned: %d\n", ret); if (qc->scsicmd) ASSIGN_SAS_TASK(qc->scsicmd, NULL); sas_free_task(task); - return AC_ERR_SYSTEM; + ret = AC_ERR_SYSTEM; } - return 0; + out: + spin_lock(ap->lock); + local_irq_restore(flags); + return ret; } static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc) diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 2a163c73fd8..fd60465d4b2 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -198,11 +198,9 @@ int sas_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) } if (dev_is_sata(dev)) { - unsigned long flags; - - spin_lock_irqsave(dev->sata_dev.ap->lock, flags); + spin_lock_irq(dev->sata_dev.ap->lock); res = ata_sas_queuecmd(cmd, dev->sata_dev.ap); - spin_unlock_irqrestore(dev->sata_dev.ap->lock, flags); + spin_unlock_irq(dev->sata_dev.ap->lock); return res; } diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c index b118e632bc7..cd882230591 100644 --- a/drivers/scsi/mvsas/mv_sas.c +++ b/drivers/scsi/mvsas/mv_sas.c @@ -893,9 +893,6 @@ static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags, mvi = ((struct mvs_device *)task->dev->lldd_dev)->mvi_info; - if ((dev->dev_type == SATA_DEV) && (dev->sata_dev.ap != NULL)) - spin_unlock_irq(dev->sata_dev.ap->lock); - spin_lock_irqsave(&mvi->lock, flags); rc = mvs_task_prep(task, mvi, is_tmf, tmf, &pass); if (rc) @@ -906,9 +903,6 @@ static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags, (MVS_CHIP_SLOT_SZ - 1)); spin_unlock_irqrestore(&mvi->lock, flags); - if ((dev->dev_type == SATA_DEV) && (dev->sata_dev.ap != NULL)) - spin_lock_irq(dev->sata_dev.ap->lock); - return rc; } diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 50837933a1e..310860e37d9 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -364,7 +364,7 @@ static int pm8001_task_exec(struct sas_task *task, const int num, struct pm8001_ccb_info *ccb; u32 tag = 0xdeadbeef, rc, n_elem = 0; u32 n = num; - unsigned long flags = 0, flags_libsas = 0; + unsigned long flags = 0; if (!dev->port) { struct task_status_struct *tsm = &t->task_status; @@ -388,11 +388,7 @@ static int pm8001_task_exec(struct sas_task *task, const int num, ts->stat = SAS_PHY_DOWN; spin_unlock_irqrestore(&pm8001_ha->lock, flags); - spin_unlock_irqrestore(dev->sata_dev.ap->lock, - flags_libsas); t->task_done(t); - spin_lock_irqsave(dev->sata_dev.ap->lock, - flags_libsas); spin_lock_irqsave(&pm8001_ha->lock, flags); if (n > 1) t = list_entry(t->list.next, -- cgit v1.2.3-70-g09d2 From e139942d77a6e3ac83bc322e826668054a8601d6 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 7 Jan 2012 08:52:39 +0000 Subject: [SCSI] libsas: convert dev->gone to flags In preparation for adding tracking of another device state "destroy". Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 2 +- drivers/scsi/libsas/sas_expander.c | 6 +++--- drivers/scsi/libsas/sas_port.c | 2 +- drivers/scsi/libsas/sas_scsi_host.c | 2 +- include/scsi/libsas.h | 7 +++++-- 5 files changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 81ce39d166d..2fc5a3961ca 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -184,7 +184,7 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc) spin_unlock(ap->lock); /* If the device fell off, no sense in issuing commands */ - if (dev->gone) + if (test_bit(SAS_DEV_GONE, &dev->state)) goto out; task = sas_alloc_task(GFP_ATOMIC); diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 15d2239a378..f33d0c9911c 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -1750,7 +1750,7 @@ static void sas_unregister_ex_tree(struct asd_sas_port *port, struct domain_devi struct domain_device *child, *n; list_for_each_entry_safe(child, n, &ex->children, siblings) { - child->gone = 1; + set_bit(SAS_DEV_GONE, &child->state); if (child->dev_type == EDGE_DEV || child->dev_type == FANOUT_DEV) sas_unregister_ex_tree(port, child); @@ -1771,7 +1771,7 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent, &ex_dev->children, siblings) { if (SAS_ADDR(child->sas_addr) == SAS_ADDR(phy->attached_sas_addr)) { - child->gone = 1; + set_bit(SAS_DEV_GONE, &child->state); if (child->dev_type == EDGE_DEV || child->dev_type == FANOUT_DEV) sas_unregister_ex_tree(parent->port, child); @@ -1780,7 +1780,7 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent, break; } } - parent->gone = 1; + set_bit(SAS_DEV_GONE, &parent->state); sas_disable_routing(parent, phy->attached_sas_addr); } memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index a47c7a75327..d88e55f9732 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -171,7 +171,7 @@ void sas_deform_port(struct asd_sas_phy *phy, int gone) if (port->num_phys == 1) { if (dev && gone) - dev->gone = 1; + set_bit(SAS_DEV_GONE, &dev->state); sas_unregister_domain_devices(port); sas_port_delete(port->port); port->port = NULL; diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index fd60465d4b2..15533a17eb9 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -192,7 +192,7 @@ int sas_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) int res = 0; /* If the device fell off, no sense in issuing commands */ - if (dev->gone) { + if (test_bit(SAS_DEV_GONE, &dev->state)) { cmd->result = DID_BAD_TARGET << 16; goto out_done; } diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 42900fa95a0..d792b13cfcf 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -173,7 +173,10 @@ struct sata_device { struct ata_taskfile tf; }; -/* ---------- Domain device ---------- */ +enum { + SAS_DEV_GONE, +}; + struct domain_device { enum sas_dev_type dev_type; @@ -205,7 +208,7 @@ struct domain_device { }; void *lldd_dev; - int gone; + unsigned long state; struct kref kref; }; -- cgit v1.2.3-70-g09d2 From 87c8331fcf72e501c3a3c0cdc5c9391ec72f7cf2 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Nov 2011 17:59:51 -0800 Subject: [SCSI] libsas: prevent domain rediscovery competing with ata error handling libata error handling provides for a timeout for link recovery. libsas must not rescan for previously known devices in this interval otherwise it may remove a device that is simply waiting for its link to recover. Let libata-eh make the determination of when the link is stable and prevent libsas (host workqueue) from taking action while this determination is pending. Using a mutex (ha->disco_mutex) to flush and disable revalidation while eh is running requires any discovery action that may block on eh be moved to its own context outside the lock. Probing ATA devices explicitly waits on ata-eh and the cache-flush-io issued during device removal may also pend awaiting eh completion. Essentially any rphy add/remove activity needs to run outside the lock. This adds two new cleanup states for sas_unregister_domain_devices() 'allocated-but-not-probed', and 'flagged-for-destruction'. In the 'allocated-but-not-probed' state dev->rphy points to a rphy that is known to have not been through a sas_rphy_add() event. At domain teardown check if this device is still pending probe and cleanup accordingly. Similarly if a device has already been queued for removal then sas_unregister_domain_devices has nothing to do. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 55 ++++++++++++++++++++++++++++++--- drivers/scsi/libsas/sas_discover.c | 63 ++++++++++++++++++++++++++++++++++---- drivers/scsi/libsas/sas_event.c | 26 ++++++++++++++++ drivers/scsi/libsas/sas_expander.c | 5 ++- drivers/scsi/libsas/sas_init.c | 2 ++ drivers/scsi/libsas/sas_internal.h | 3 ++ drivers/scsi/libsas/sas_port.c | 2 ++ drivers/scsi/scsi_transport_sas.c | 18 +++++++++-- include/scsi/libsas.h | 12 ++++++-- include/scsi/sas_ata.h | 5 +++ include/scsi/scsi_transport_sas.h | 1 + 11 files changed, 174 insertions(+), 18 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 2fc5a3961ca..4b6365c6410 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -758,6 +758,35 @@ static int sas_discover_sata_pm(struct domain_device *dev) return -ENODEV; } +void sas_probe_sata(struct work_struct *work) +{ + struct domain_device *dev, *n; + struct sas_discovery_event *ev = + container_of(work, struct sas_discovery_event, work); + struct asd_sas_port *port = ev->port; + + clear_bit(DISCE_PROBE, &port->disc.pending); + + list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { + int err; + + spin_lock_irq(&port->dev_list_lock); + list_add_tail(&dev->dev_list_node, &port->dev_list); + spin_unlock_irq(&port->dev_list_lock); + + err = sas_rphy_add(dev->rphy); + + if (err) { + SAS_DPRINTK("%s: for %s device %16llx returned %d\n", + __func__, dev->parent ? "exp-attached" : + "direct-attached", + SAS_ADDR(dev->sas_addr), err); + sas_unregister_dev(port, dev); + } else + list_del_init(&dev->disco_list_node); + } +} + /** * sas_discover_sata -- discover an STP/SATA domain device * @dev: pointer to struct domain_device of interest @@ -794,10 +823,15 @@ int sas_discover_sata(struct domain_device *dev) break; } sas_notify_lldd_dev_gone(dev); - if (!res) { - sas_notify_lldd_dev_found(dev); - res = sas_rphy_add(dev->rphy); - } + + if (res) + return res; + + res = sas_notify_lldd_dev_found(dev); + if (res) + return res; + + sas_discover_event(dev->port, DISCE_PROBE); return res; } @@ -805,6 +839,17 @@ int sas_discover_sata(struct domain_device *dev) void sas_ata_strategy_handler(struct Scsi_Host *shost) { struct scsi_device *sdev; + struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); + + /* it's ok to defer revalidation events during ata eh, these + * disks are in one of three states: + * 1/ present for initial domain discovery, and these + * resets will cause bcn flutters + * 2/ hot removed, we'll discover that after eh fails + * 3/ hot added after initial discovery, lost the race, and need + * to catch the next train. + */ + sas_disable_revalidation(sas_ha); shost_for_each_device(sdev, shost) { struct domain_device *ddev = sdev_to_domain_dev(sdev); @@ -816,6 +861,8 @@ void sas_ata_strategy_handler(struct Scsi_Host *shost) ata_port_printk(ap, KERN_DEBUG, "sas eh calling libata port error handler"); ata_scsi_port_error_handler(shost, ap); } + + sas_enable_revalidation(sas_ha); } int sas_ata_timed_out(struct scsi_cmnd *cmd, struct sas_task *task, diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 32e01176604..7e8fdcb202b 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -148,9 +148,14 @@ static int sas_get_port_device(struct asd_sas_port *port) port->disc.max_level = 0; dev->rphy = rphy; - spin_lock_irq(&port->dev_list_lock); - list_add_tail(&dev->dev_list_node, &port->dev_list); - spin_unlock_irq(&port->dev_list_lock); + + if (dev_is_sata(dev)) + list_add_tail(&dev->disco_list_node, &port->disco_list); + else { + spin_lock_irq(&port->dev_list_lock); + list_add_tail(&dev->dev_list_node, &port->dev_list); + spin_unlock_irq(&port->dev_list_lock); + } return 0; } @@ -255,14 +260,43 @@ static void sas_unregister_common_dev(struct asd_sas_port *port, struct domain_d sas_put_device(dev); } -void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *dev) +static void sas_destruct_devices(struct work_struct *work) { - if (dev->rphy) { + struct domain_device *dev, *n; + struct sas_discovery_event *ev = + container_of(work, struct sas_discovery_event, work); + struct asd_sas_port *port = ev->port; + + clear_bit(DISCE_DESTRUCT, &port->disc.pending); + + list_for_each_entry_safe(dev, n, &port->destroy_list, disco_list_node) { + list_del_init(&dev->disco_list_node); + sas_remove_children(&dev->rphy->dev); sas_rphy_delete(dev->rphy); dev->rphy = NULL; + sas_unregister_common_dev(port, dev); + + sas_put_device(dev); + } +} + +void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *dev) +{ + if (!test_bit(SAS_DEV_DESTROY, &dev->state) && + !list_empty(&dev->disco_list_node)) { + /* this rphy never saw sas_rphy_add */ + list_del_init(&dev->disco_list_node); + sas_rphy_free(dev->rphy); + dev->rphy = NULL; + sas_unregister_common_dev(port, dev); + } + + if (dev->rphy && !test_and_set_bit(SAS_DEV_DESTROY, &dev->state)) { + sas_rphy_unlink(dev->rphy); + list_move_tail(&dev->disco_list_node, &port->destroy_list); + sas_discover_event(dev->port, DISCE_DESTRUCT); } - sas_unregister_common_dev(port, dev); } void sas_unregister_domain_devices(struct asd_sas_port *port) @@ -271,6 +305,8 @@ void sas_unregister_domain_devices(struct asd_sas_port *port) list_for_each_entry_safe_reverse(dev, n, &port->dev_list, dev_list_node) sas_unregister_dev(port, dev); + list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) + sas_unregister_dev(port, dev); port->port->rphy = NULL; @@ -335,6 +371,7 @@ static void sas_discover_domain(struct work_struct *work) sas_rphy_free(dev->rphy); dev->rphy = NULL; + list_del_init(&dev->disco_list_node); spin_lock_irq(&port->dev_list_lock); list_del_init(&dev->dev_list_node); spin_unlock_irq(&port->dev_list_lock); @@ -353,16 +390,28 @@ static void sas_revalidate_domain(struct work_struct *work) struct sas_discovery_event *ev = container_of(work, struct sas_discovery_event, work); struct asd_sas_port *port = ev->port; + struct sas_ha_struct *ha = port->ha; + + /* prevent revalidation from finding sata links in recovery */ + mutex_lock(&ha->disco_mutex); + if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) { + SAS_DPRINTK("REVALIDATION DEFERRED on port %d, pid:%d\n", + port->id, task_pid_nr(current)); + goto out; + } clear_bit(DISCE_REVALIDATE_DOMAIN, &port->disc.pending); SAS_DPRINTK("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id, task_pid_nr(current)); + if (port->port_dev) res = sas_ex_revalidate_domain(port->port_dev); SAS_DPRINTK("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n", port->id, task_pid_nr(current), res); + out: + mutex_unlock(&ha->disco_mutex); } /* ---------- Events ---------- */ @@ -414,6 +463,8 @@ void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *port) static const work_func_t sas_event_fns[DISC_NUM_EVENTS] = { [DISCE_DISCOVER_DOMAIN] = sas_discover_domain, [DISCE_REVALIDATE_DOMAIN] = sas_revalidate_domain, + [DISCE_PROBE] = sas_probe_sata, + [DISCE_DESTRUCT] = sas_destruct_devices, }; disc->pending = 0; diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c index e5035aa4c2a..933d757499b 100644 --- a/drivers/scsi/libsas/sas_event.c +++ b/drivers/scsi/libsas/sas_event.c @@ -81,6 +81,32 @@ int sas_drain_work(struct sas_ha_struct *ha) } EXPORT_SYMBOL_GPL(sas_drain_work); +void sas_disable_revalidation(struct sas_ha_struct *ha) +{ + mutex_lock(&ha->disco_mutex); + set_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state); + mutex_unlock(&ha->disco_mutex); +} + +void sas_enable_revalidation(struct sas_ha_struct *ha) +{ + int i; + + mutex_lock(&ha->disco_mutex); + clear_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state); + for (i = 0; i < ha->num_phys; i++) { + struct asd_sas_port *port = ha->sas_port[i]; + const int ev = DISCE_REVALIDATE_DOMAIN; + struct sas_discovery *d = &port->disc; + + if (!test_and_clear_bit(ev, &d->pending)) + continue; + + sas_queue_event(ev, &d->pending, &d->disc_work[ev].work, ha); + } + mutex_unlock(&ha->disco_mutex); +} + static void notify_ha_event(struct sas_ha_struct *sas_ha, enum ha_event event) { BUG_ON(event >= HA_NUM_EVENTS); diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index f33d0c9911c..e45b259dac4 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -704,9 +704,7 @@ static struct domain_device *sas_ex_discover_end_dev( child->rphy = rphy; - spin_lock_irq(&parent->port->dev_list_lock); - list_add_tail(&child->dev_list_node, &parent->port->dev_list); - spin_unlock_irq(&parent->port->dev_list_lock); + list_add_tail(&child->disco_list_node, &parent->port->disco_list); res = sas_discover_sata(child); if (res) { @@ -756,6 +754,7 @@ static struct domain_device *sas_ex_discover_end_dev( sas_rphy_free(child->rphy); child->rphy = NULL; + list_del(&child->disco_list_node); spin_lock_irq(&parent->port->dev_list_lock); list_del(&child->dev_list_node); spin_unlock_irq(&parent->port->dev_list_lock); diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index 572b943d760..52cd11d7666 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -104,6 +104,7 @@ int sas_register_ha(struct sas_ha_struct *sas_ha) { int error = 0; + mutex_init(&sas_ha->disco_mutex); spin_lock_init(&sas_ha->phy_port_lock); sas_hash_addr(sas_ha->hashed_sas_addr, sas_ha->sas_addr); @@ -168,6 +169,7 @@ int sas_unregister_ha(struct sas_ha_struct *sas_ha) sas_drain_work(sas_ha); sas_unregister_ports(sas_ha); + sas_drain_work(sas_ha); if (sas_ha->lldd_max_execute_num > 1) { sas_shutdown_queue(sas_ha); diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 948ea64cc2e..ebe9b81ddef 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -56,6 +56,8 @@ enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *); int sas_init_queue(struct sas_ha_struct *sas_ha); int sas_init_events(struct sas_ha_struct *sas_ha); void sas_shutdown_queue(struct sas_ha_struct *sas_ha); +void sas_disable_revalidation(struct sas_ha_struct *ha); +void sas_enable_revalidation(struct sas_ha_struct *ha); void sas_deform_port(struct asd_sas_phy *phy, int gone); @@ -138,6 +140,7 @@ static inline struct domain_device *sas_alloc_device(void) if (dev) { INIT_LIST_HEAD(&dev->siblings); INIT_LIST_HEAD(&dev->dev_list_node); + INIT_LIST_HEAD(&dev->disco_list_node); kref_init(&dev->kref); } return dev; diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index d88e55f9732..2980bde4e34 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -277,6 +277,8 @@ static void sas_init_port(struct asd_sas_port *port, memset(port, 0, sizeof(*port)); port->id = i; INIT_LIST_HEAD(&port->dev_list); + INIT_LIST_HEAD(&port->disco_list); + INIT_LIST_HEAD(&port->destroy_list); spin_lock_init(&port->phy_list_lock); INIT_LIST_HEAD(&port->phy_list); port->ha = sas_ha; diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 9d9330ae421..9421bae8af1 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -1602,6 +1602,20 @@ sas_rphy_delete(struct sas_rphy *rphy) } EXPORT_SYMBOL(sas_rphy_delete); +/** + * sas_rphy_unlink - unlink SAS remote PHY + * @rphy: SAS remote phy to unlink from its parent port + * + * Removes port reference to an rphy + */ +void sas_rphy_unlink(struct sas_rphy *rphy) +{ + struct sas_port *parent = dev_to_sas_port(rphy->dev.parent); + + parent->rphy = NULL; +} +EXPORT_SYMBOL(sas_rphy_unlink); + /** * sas_rphy_remove - remove SAS remote PHY * @rphy: SAS remote phy to remove @@ -1612,7 +1626,6 @@ void sas_rphy_remove(struct sas_rphy *rphy) { struct device *dev = &rphy->dev; - struct sas_port *parent = dev_to_sas_port(dev->parent); switch (rphy->identify.device_type) { case SAS_END_DEVICE: @@ -1626,10 +1639,9 @@ sas_rphy_remove(struct sas_rphy *rphy) break; } + sas_rphy_unlink(rphy); transport_remove_device(dev); device_del(dev); - - parent->rphy = NULL; } EXPORT_SYMBOL(sas_rphy_remove); diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index d792b13cfcf..bd6e89ece2a 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -86,7 +86,9 @@ enum discover_event { DISCE_DISCOVER_DOMAIN = 0U, DISCE_REVALIDATE_DOMAIN = 1, DISCE_PORT_GONE = 2, - DISC_NUM_EVENTS = 3, + DISCE_PROBE = 3, + DISCE_DESTRUCT = 4, + DISC_NUM_EVENTS = 5, }; /* ---------- Expander Devices ---------- */ @@ -175,6 +177,7 @@ struct sata_device { enum { SAS_DEV_GONE, + SAS_DEV_DESTROY, }; struct domain_device { @@ -191,6 +194,7 @@ struct domain_device { struct asd_sas_port *port; /* shortcut to root of the tree */ struct list_head dev_list_node; + struct list_head disco_list_node; /* awaiting probe or destruct */ enum sas_protocol iproto; enum sas_protocol tproto; @@ -226,7 +230,6 @@ struct sas_discovery { int max_level; }; - /* The port struct is Class:RW, driver:RO */ struct asd_sas_port { /* private: */ @@ -236,6 +239,8 @@ struct asd_sas_port { struct domain_device *port_dev; spinlock_t dev_list_lock; struct list_head dev_list; + struct list_head disco_list; + struct list_head destroy_list; enum sas_linkrate linkrate; struct sas_phy *phy; @@ -334,6 +339,7 @@ struct sas_ha_event { enum sas_ha_state { SAS_HA_REGISTERED, SAS_HA_DRAINING, + SAS_HA_ATA_EH_ACTIVE, }; struct sas_ha_struct { @@ -346,6 +352,8 @@ struct sas_ha_struct { unsigned long state; spinlock_t state_lock; + struct mutex disco_mutex; + struct scsi_core core; /* public: */ diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h index 7d5013f8653..557fc9a8559 100644 --- a/include/scsi/sas_ata.h +++ b/include/scsi/sas_ata.h @@ -45,6 +45,7 @@ int sas_ata_timed_out(struct scsi_cmnd *cmd, struct sas_task *task, enum blk_eh_timer_return *rtn); int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q); +void sas_probe_sata(struct work_struct *work); #else @@ -78,6 +79,10 @@ static inline int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, return 0; } +static inline void sas_probe_sata(struct work_struct *work) +{ +} + #endif #endif /* _SAS_ATA_H_ */ diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h index ffeebc34a4f..6d14daac758 100644 --- a/include/scsi/scsi_transport_sas.h +++ b/include/scsi/scsi_transport_sas.h @@ -194,6 +194,7 @@ void sas_rphy_free(struct sas_rphy *); extern int sas_rphy_add(struct sas_rphy *); extern void sas_rphy_remove(struct sas_rphy *); extern void sas_rphy_delete(struct sas_rphy *); +extern void sas_rphy_unlink(struct sas_rphy *); extern int scsi_is_sas_rphy(const struct device *); struct sas_port *sas_port_alloc(struct device *, int); -- cgit v1.2.3-70-g09d2 From b91bb296188118eea9fdc6093cfcf76bbe8589ba Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Nov 2011 17:59:52 -0800 Subject: [SCSI] libsas: use ->set_dmamode to notify lldds of NCQ parameters sas_discover_sata() notifies lldds of sata devices twice. Once to allow the 'identify' to be sent, and a second time to allow aic94xx (the only libsas driver that cares about sata_dev.identify) to setup NCQ parameters before the device becomes known to the midlayer. Replace this double notification and intervening 'identify' with an explicit ->lldd_ata_set_dmamode notification. With this change all ata internal commands are issued by libata, so we no longer need sas_issue_ata_cmd(). The data from the identify command only needs to be cached in one location so ata_device.id replaces domain_device.sata_dev.identify. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/aic94xx/aic94xx.h | 2 + drivers/scsi/aic94xx/aic94xx_dev.c | 38 +++-- drivers/scsi/aic94xx/aic94xx_init.c | 2 + drivers/scsi/libsas/sas_ata.c | 324 +++--------------------------------- drivers/scsi/libsas/sas_discover.c | 5 - include/scsi/libsas.h | 4 +- 6 files changed, 49 insertions(+), 326 deletions(-) diff --git a/drivers/scsi/aic94xx/aic94xx.h b/drivers/scsi/aic94xx/aic94xx.h index 2863a9d2285..66cda669b41 100644 --- a/drivers/scsi/aic94xx/aic94xx.h +++ b/drivers/scsi/aic94xx/aic94xx.h @@ -80,6 +80,8 @@ void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id); int asd_execute_task(struct sas_task *, int num, gfp_t gfp_flags); +void asd_set_dmamode(struct domain_device *dev); + /* ---------- TMFs ---------- */ int asd_abort_task(struct sas_task *); int asd_abort_task_set(struct domain_device *, u8 *lun); diff --git a/drivers/scsi/aic94xx/aic94xx_dev.c b/drivers/scsi/aic94xx/aic94xx_dev.c index 2e2ddec9c0b..64136c56e70 100644 --- a/drivers/scsi/aic94xx/aic94xx_dev.c +++ b/drivers/scsi/aic94xx/aic94xx_dev.c @@ -109,26 +109,37 @@ static int asd_init_sata_tag_ddb(struct domain_device *dev) return 0; } -static int asd_init_sata(struct domain_device *dev) +void asd_set_dmamode(struct domain_device *dev) { struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha; + struct ata_device *ata_dev = sas_to_ata_dev(dev); int ddb = (int) (unsigned long) dev->lldd_dev; u32 qdepth = 0; - int res = 0; - asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF); - if ((dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT) && - dev->sata_dev.identify_device && - dev->sata_dev.identify_device[10] != 0) { - u16 w75 = le16_to_cpu(dev->sata_dev.identify_device[75]); - u16 w76 = le16_to_cpu(dev->sata_dev.identify_device[76]); - - if (w76 & 0x100) /* NCQ? */ - qdepth = (w75 & 0x1F) + 1; + if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM_PORT) { + if (ata_id_has_ncq(ata_dev->id)) + qdepth = ata_id_queue_depth(ata_dev->id); asd_ddbsite_write_dword(asd_ha, ddb, SATA_TAG_ALLOC_MASK, (1ULL< 0) + if (asd_init_sata_tag_ddb(dev) != 0) { + unsigned long flags; + + spin_lock_irqsave(dev->sata_dev.ap->lock, flags); + ata_dev->flags |= ATA_DFLAG_NCQ_OFF; + spin_unlock_irqrestore(dev->sata_dev.ap->lock, flags); + } +} + +static int asd_init_sata(struct domain_device *dev) +{ + struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha; + int ddb = (int) (unsigned long) dev->lldd_dev; + + asd_ddbsite_write_word(asd_ha, ddb, ATA_CMD_SCBPTR, 0xFFFF); if (dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM || dev->dev_type == SATA_PM_PORT) { struct dev_to_host_fis *fis = (struct dev_to_host_fis *) @@ -136,9 +147,8 @@ static int asd_init_sata(struct domain_device *dev) asd_ddbsite_write_byte(asd_ha, ddb, SATA_STATUS, fis->status); } asd_ddbsite_write_word(asd_ha, ddb, NCQ_DATA_SCB_PTR, 0xFFFF); - if (qdepth > 0) - res = asd_init_sata_tag_ddb(dev); - return res; + + return 0; } static int asd_init_target_ddb(struct domain_device *dev) diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c index 2b3717f6d22..eea988a04f9 100644 --- a/drivers/scsi/aic94xx/aic94xx_init.c +++ b/drivers/scsi/aic94xx/aic94xx_init.c @@ -1009,6 +1009,8 @@ static struct sas_domain_function_template aic94xx_transport_functions = { .lldd_clear_nexus_ha = asd_clear_nexus_ha, .lldd_control_phy = asd_control_phy, + + .lldd_ata_set_dmamode = asd_set_dmamode, }; static const struct pci_device_id aic94xx_pci_table[] __devinitdata = { diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 4b6365c6410..71af919b856 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -367,6 +367,17 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc) } } + +static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev) +{ + struct domain_device *dev = ap->private_data; + struct sas_internal *i = + to_sas_internal(dev->port->ha->core.shost->transportt); + + if (i->dft->lldd_ata_set_dmamode) + i->dft->lldd_ata_set_dmamode(dev); +} + static struct ata_port_operations sas_sata_ops = { .prereset = ata_std_prereset, .softreset = sas_ata_soft_reset, @@ -380,6 +391,7 @@ static struct ata_port_operations sas_sata_ops = { .qc_fill_rtf = sas_ata_qc_fill_rtf, .port_start = ata_sas_port_start, .port_stop = ata_sas_port_stop, + .set_dmamode = sas_ata_set_dmamode, }; static struct ata_port_info sata_port_info = { @@ -442,163 +454,6 @@ void sas_ata_task_abort(struct sas_task *task) complete(waiting); } -static void sas_task_timedout(unsigned long _task) -{ - struct sas_task *task = (void *) _task; - unsigned long flags; - - spin_lock_irqsave(&task->task_state_lock, flags); - if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) - task->task_state_flags |= SAS_TASK_STATE_ABORTED; - spin_unlock_irqrestore(&task->task_state_lock, flags); - - complete(&task->completion); -} - -static void sas_disc_task_done(struct sas_task *task) -{ - if (!del_timer(&task->timer)) - return; - complete(&task->completion); -} - -#define SAS_DEV_TIMEOUT 10 - -/** - * sas_execute_task -- Basic task processing for discovery - * @task: the task to be executed - * @buffer: pointer to buffer to do I/O - * @size: size of @buffer - * @dma_dir: DMA direction. DMA_xxx - */ -static int sas_execute_task(struct sas_task *task, void *buffer, int size, - enum dma_data_direction dma_dir) -{ - int res = 0; - struct scatterlist *scatter = NULL; - struct task_status_struct *ts = &task->task_status; - int num_scatter = 0; - int retries = 0; - struct sas_internal *i = - to_sas_internal(task->dev->port->ha->core.shost->transportt); - - if (dma_dir != DMA_NONE) { - scatter = kzalloc(sizeof(*scatter), GFP_KERNEL); - if (!scatter) - goto out; - - sg_init_one(scatter, buffer, size); - num_scatter = 1; - } - - task->task_proto = task->dev->tproto; - task->scatter = scatter; - task->num_scatter = num_scatter; - task->total_xfer_len = size; - task->data_dir = dma_dir; - task->task_done = sas_disc_task_done; - if (dma_dir != DMA_NONE && - sas_protocol_ata(task->task_proto)) { - task->num_scatter = dma_map_sg(task->dev->port->ha->dev, - task->scatter, - task->num_scatter, - task->data_dir); - } - - for (retries = 0; retries < 5; retries++) { - task->task_state_flags = SAS_TASK_STATE_PENDING; - init_completion(&task->completion); - - task->timer.data = (unsigned long) task; - task->timer.function = sas_task_timedout; - task->timer.expires = jiffies + SAS_DEV_TIMEOUT*HZ; - add_timer(&task->timer); - - res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL); - if (res) { - del_timer(&task->timer); - SAS_DPRINTK("executing SAS discovery task failed:%d\n", - res); - goto ex_err; - } - wait_for_completion(&task->completion); - res = -ECOMM; - if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { - int res2; - SAS_DPRINTK("task aborted, flags:0x%x\n", - task->task_state_flags); - res2 = i->dft->lldd_abort_task(task); - SAS_DPRINTK("came back from abort task\n"); - if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { - if (res2 == TMF_RESP_FUNC_COMPLETE) - continue; /* Retry the task */ - else - goto ex_err; - } - } - if (task->task_status.stat == SAM_STAT_BUSY || - task->task_status.stat == SAM_STAT_TASK_SET_FULL || - task->task_status.stat == SAS_QUEUE_FULL) { - SAS_DPRINTK("task: q busy, sleeping...\n"); - schedule_timeout_interruptible(HZ); - } else if (task->task_status.stat == SAM_STAT_CHECK_CONDITION) { - struct scsi_sense_hdr shdr; - - if (!scsi_normalize_sense(ts->buf, ts->buf_valid_size, - &shdr)) { - SAS_DPRINTK("couldn't normalize sense\n"); - continue; - } - if ((shdr.sense_key == 6 && shdr.asc == 0x29) || - (shdr.sense_key == 2 && shdr.asc == 4 && - shdr.ascq == 1)) { - SAS_DPRINTK("device %016llx LUN: %016llx " - "powering up or not ready yet, " - "sleeping...\n", - SAS_ADDR(task->dev->sas_addr), - SAS_ADDR(task->ssp_task.LUN)); - - schedule_timeout_interruptible(5*HZ); - } else if (shdr.sense_key == 1) { - res = 0; - break; - } else if (shdr.sense_key == 5) { - break; - } else { - SAS_DPRINTK("dev %016llx LUN: %016llx " - "sense key:0x%x ASC:0x%x ASCQ:0x%x" - "\n", - SAS_ADDR(task->dev->sas_addr), - SAS_ADDR(task->ssp_task.LUN), - shdr.sense_key, - shdr.asc, shdr.ascq); - } - } else if (task->task_status.resp != SAS_TASK_COMPLETE || - task->task_status.stat != SAM_STAT_GOOD) { - SAS_DPRINTK("task finished with resp:0x%x, " - "stat:0x%x\n", - task->task_status.resp, - task->task_status.stat); - goto ex_err; - } else { - res = 0; - break; - } - } -ex_err: - if (dma_dir != DMA_NONE) { - if (sas_protocol_ata(task->task_proto)) - dma_unmap_sg(task->dev->port->ha->dev, - task->scatter, task->num_scatter, - task->data_dir); - kfree(scatter); - } -out: - return res; -} - -/* ---------- SATA ---------- */ - static void sas_get_ata_command_set(struct domain_device *dev) { struct dev_to_host_fis *fis = @@ -642,122 +497,6 @@ static void sas_get_ata_command_set(struct domain_device *dev) dev->sata_dev.command_set = ATAPI_COMMAND_SET; } -/** - * sas_issue_ata_cmd -- Basic SATA command processing for discovery - * @dev: the device to send the command to - * @command: the command register - * @features: the features register - * @buffer: pointer to buffer to do I/O - * @size: size of @buffer - * @dma_dir: DMA direction. DMA_xxx - */ -static int sas_issue_ata_cmd(struct domain_device *dev, u8 command, - u8 features, void *buffer, int size, - enum dma_data_direction dma_dir) -{ - int res = 0; - struct sas_task *task; - struct dev_to_host_fis *d2h_fis = (struct dev_to_host_fis *) - &dev->frame_rcvd[0]; - - res = -ENOMEM; - task = sas_alloc_task(GFP_KERNEL); - if (!task) - goto out; - - task->dev = dev; - - task->ata_task.fis.fis_type = 0x27; - task->ata_task.fis.command = command; - task->ata_task.fis.features = features; - task->ata_task.fis.device = d2h_fis->device; - task->ata_task.retry_count = 1; - - res = sas_execute_task(task, buffer, size, dma_dir); - - sas_free_task(task); -out: - return res; -} - -#define ATA_IDENTIFY_DEV 0xEC -#define ATA_IDENTIFY_PACKET_DEV 0xA1 -#define ATA_SET_FEATURES 0xEF -#define ATA_FEATURE_PUP_STBY_SPIN_UP 0x07 - -/** - * sas_discover_sata_dev -- discover a STP/SATA device (SATA_DEV) - * @dev: STP/SATA device of interest (ATA/ATAPI) - * - * The LLDD has already been notified of this device, so that we can - * send FISes to it. Here we try to get IDENTIFY DEVICE or IDENTIFY - * PACKET DEVICE, if ATAPI device, so that the LLDD can fine-tune its - * performance for this device. - */ -static int sas_discover_sata_dev(struct domain_device *dev) -{ - int res; - __le16 *identify_x; - u8 command; - - identify_x = kzalloc(512, GFP_KERNEL); - if (!identify_x) - return -ENOMEM; - - if (dev->sata_dev.command_set == ATA_COMMAND_SET) { - dev->sata_dev.identify_device = identify_x; - command = ATA_IDENTIFY_DEV; - } else { - dev->sata_dev.identify_packet_device = identify_x; - command = ATA_IDENTIFY_PACKET_DEV; - } - - res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512, - DMA_FROM_DEVICE); - if (res) - goto out_err; - - /* lives on the media? */ - if (le16_to_cpu(identify_x[0]) & 4) { - /* incomplete response */ - SAS_DPRINTK("sending SET FEATURE/PUP_STBY_SPIN_UP to " - "dev %llx\n", SAS_ADDR(dev->sas_addr)); - if (!(identify_x[83] & cpu_to_le16(1<<6))) - goto cont1; - res = sas_issue_ata_cmd(dev, ATA_SET_FEATURES, - ATA_FEATURE_PUP_STBY_SPIN_UP, - NULL, 0, DMA_NONE); - if (res) - goto cont1; - - schedule_timeout_interruptible(5*HZ); /* More time? */ - res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512, - DMA_FROM_DEVICE); - if (res) - goto out_err; - } -cont1: - /* XXX Hint: register this SATA device with SATL. - When this returns, dev->sata_dev->lu is alive and - present. - sas_satl_register_dev(dev); - */ - - sas_fill_in_rphy(dev, dev->rphy); - - return 0; -out_err: - dev->sata_dev.identify_packet_device = NULL; - dev->sata_dev.identify_device = NULL; - kfree(identify_x); - return res; -} - -static int sas_discover_sata_pm(struct domain_device *dev) -{ - return -ENODEV; -} - void sas_probe_sata(struct work_struct *work) { struct domain_device *dev, *n; @@ -791,49 +530,26 @@ void sas_probe_sata(struct work_struct *work) * sas_discover_sata -- discover an STP/SATA domain device * @dev: pointer to struct domain_device of interest * - * First we notify the LLDD of this device, so we can send frames to - * it. Then depending on the type of device we call the appropriate - * discover functions. Once device discover is done, we notify the - * LLDD so that it can fine-tune its parameters for the device, by - * removing it and then adding it. That is, the second time around, - * the driver would have certain fields, that it is looking at, set. - * Finally we initialize the kobj so that the device can be added to - * the system at registration time. Devices directly attached to a HA - * port, have no parents. All other devices do, and should have their - * "parent" pointer set appropriately before calling this function. + * Devices directly attached to a HA port, have no parents. All other + * devices do, and should have their "parent" pointer set appropriately + * before calling this function. */ int sas_discover_sata(struct domain_device *dev) { int res; - sas_get_ata_command_set(dev); - - res = sas_notify_lldd_dev_found(dev); - if (res) - return res; - - switch (dev->dev_type) { - case SATA_DEV: - res = sas_discover_sata_dev(dev); - break; - case SATA_PM: - res = sas_discover_sata_pm(dev); - break; - default: - break; - } - sas_notify_lldd_dev_gone(dev); + if (dev->dev_type == SATA_PM) + return -ENODEV; - if (res) - return res; + sas_get_ata_command_set(dev); + sas_fill_in_rphy(dev, dev->rphy); res = sas_notify_lldd_dev_found(dev); if (res) return res; sas_discover_event(dev->port, DISCE_PROBE); - - return res; + return 0; } void sas_ata_strategy_handler(struct Scsi_Host *shost) diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 7e8fdcb202b..bad5eba4a92 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -237,11 +237,6 @@ void sas_free_device(struct kref *kref) if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) kfree(dev->ex_dev.ex_phy); - if (dev_is_sata(dev)) { - kfree(dev->sata_dev.identify_device); - kfree(dev->sata_dev.identify_packet_device); - } - kfree(dev); } diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index bd6e89ece2a..9c13a5c0bb3 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -164,9 +164,6 @@ enum ata_command_set { struct sata_device { enum ata_command_set command_set; struct smp_resp rps_resp; /* report_phy_sata_resp */ - __le16 *identify_device; - __le16 *identify_packet_device; - u8 port_no; /* port number, if this is a PM (Port) */ struct list_head children; /* PM Ports if this is a PM */ @@ -609,6 +606,7 @@ struct sas_domain_function_template { int (*lldd_clear_task_set)(struct domain_device *, u8 *lun); int (*lldd_I_T_nexus_reset)(struct domain_device *); int (*lldd_ata_soft_reset)(struct domain_device *); + void (*lldd_ata_set_dmamode)(struct domain_device *); int (*lldd_lu_reset)(struct domain_device *, u8 *lun); int (*lldd_query_task)(struct sas_task *); -- cgit v1.2.3-70-g09d2 From e500a34b0257def5b9ec07563afeeada1ead87bb Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 28 Nov 2011 17:11:33 -0800 Subject: [SCSI] libsas: kill invocation of scsi_eh_finish_cmd from sas_ata_task_done Prior to the conversion to the new-style libata-eh sas_ata_task_done() may have been the last opportunity to clean up the scmd, but now libata-eh explicitly handles this case. It also races against sas-eh. If a lldd completes a task after SAS_TASK_STATE_ABORTED is set it could trigger a spurious decrement of shost->host_failed. Current lldds have the band-aid of checking SAS_TASK_STATE_ABORTED before calling ->task_done(), but better to just let the scmds escalate to libata for race free cleanup. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 71af919b856..5cb0a2ae592 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -145,20 +145,6 @@ static void sas_ata_task_done(struct sas_task *task) ata_qc_complete(qc); spin_unlock_irqrestore(dev->sata_dev.ap->lock, flags); - /* - * If the sas_task has an ata qc, a scsi_cmnd and the aborted - * flag is set, then we must have come in via the libsas EH - * functions. When we exit this function, we need to put the - * scsi_cmnd on the list of finished errors. The ata_qc_complete - * call cleans up the libata side of things but we're protected - * from the scsi_cmnd going away because the scsi_cmnd is owned - * by the EH, making libata's call to scsi_done a NOP. - */ - spin_lock_irqsave(&task->task_state_lock, flags); - if (qc->scsicmd && task->task_state_flags & SAS_TASK_STATE_ABORTED) - scsi_eh_finish_cmd(qc->scsicmd, &sas_ha->eh_done_q); - spin_unlock_irqrestore(&task->task_state_lock, flags); - qc_already_gone: list_del_init(&task->list); sas_free_task(task); -- cgit v1.2.3-70-g09d2 From 3dff5721e4f67e6231dfc419d30aaa7563bfffd4 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 28 Nov 2011 12:08:22 -0800 Subject: [SCSI] libsas: close error handling vs sas_ata_task_done() race Since sas_ata does not implement ->freeze(), completions for scmds and internal commands can still arrive concurrent with ata_scsi_cmd_error_handler() and sas_ata_post_internal() respectively. By the time either of those is called libata has committed to completing the qc, and the ATA_PFLAG_FROZEN flag tells sas_ata_task_done() it has lost the race. In the sas_ata_post_internal() case we take on the additional responsibility of freeing the sas_task to close the race with sas_ata_task_done() freeing the the task while sas_ata_post_internal() is in the process of invoking ->lldd_abort_task(). Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 84 +++++++++++++++++++++++++++++++++---- drivers/scsi/libsas/sas_scsi_host.c | 44 ------------------- include/scsi/libsas.h | 1 - 3 files changed, 75 insertions(+), 54 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 5cb0a2ae592..903bb441b9f 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -100,15 +100,31 @@ static void sas_ata_task_done(struct sas_task *task) enum ata_completion_errors ac; unsigned long flags; struct ata_link *link; + struct ata_port *ap; if (!qc) goto qc_already_gone; - dev = qc->ap->private_data; + ap = qc->ap; + dev = ap->private_data; sas_ha = dev->port->ha; - link = &dev->sata_dev.ap->link; + link = &ap->link; + + spin_lock_irqsave(ap->lock, flags); + /* check if we lost the race with libata/sas_ata_post_internal() */ + if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) { + spin_unlock_irqrestore(ap->lock, flags); + if (qc->scsicmd) + goto qc_already_gone; + else { + /* if eh is not involved and the port is frozen then the + * ata internal abort process has taken responsibility + * for this sas_task + */ + return; + } + } - spin_lock_irqsave(dev->sata_dev.ap->lock, flags); if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD || ((stat->stat == SAM_STAT_CHECK_CONDITION && dev->sata_dev.command_set == ATAPI_COMMAND_SET))) { @@ -143,7 +159,7 @@ static void sas_ata_task_done(struct sas_task *task) if (qc->scsicmd) ASSIGN_SAS_TASK(qc->scsicmd, NULL); ata_qc_complete(qc); - spin_unlock_irqrestore(dev->sata_dev.ap->lock, flags); + spin_unlock_irqrestore(ap->lock, flags); qc_already_gone: list_del_init(&task->list); @@ -325,6 +341,54 @@ static int sas_ata_soft_reset(struct ata_link *link, unsigned int *class, return ret; } +/* + * notify the lldd to forget the sas_task for this internal ata command + * that bypasses scsi-eh + */ +static void sas_ata_internal_abort(struct sas_task *task) +{ + struct sas_internal *si = + to_sas_internal(task->dev->port->ha->core.shost->transportt); + unsigned long flags; + int res; + + spin_lock_irqsave(&task->task_state_lock, flags); + if (task->task_state_flags & SAS_TASK_STATE_ABORTED || + task->task_state_flags & SAS_TASK_STATE_DONE) { + spin_unlock_irqrestore(&task->task_state_lock, flags); + SAS_DPRINTK("%s: Task %p already finished.\n", __func__, + task); + goto out; + } + task->task_state_flags |= SAS_TASK_STATE_ABORTED; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + res = si->dft->lldd_abort_task(task); + + spin_lock_irqsave(&task->task_state_lock, flags); + if (task->task_state_flags & SAS_TASK_STATE_DONE || + res == TMF_RESP_FUNC_COMPLETE) { + spin_unlock_irqrestore(&task->task_state_lock, flags); + goto out; + } + + /* XXX we are not prepared to deal with ->lldd_abort_task() + * failures. TODO: lldds need to unconditionally forget about + * aborted ata tasks, otherwise we (likely) leak the sas task + * here + */ + SAS_DPRINTK("%s: Task %p leaked.\n", __func__, task); + + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) + task->task_state_flags &= ~SAS_TASK_STATE_ABORTED; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + return; + out: + list_del_init(&task->list); + sas_free_task(task); +} + static void sas_ata_post_internal(struct ata_queued_cmd *qc) { if (qc->flags & ATA_QCFLAG_FAILED) @@ -332,10 +396,12 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc) if (qc->err_mask) { /* - * Find the sas_task and kill it. By this point, - * libata has decided to kill the qc, so we needn't - * bother with sas_ata_task_done. But we still - * ought to abort the task. + * Find the sas_task and kill it. By this point, libata + * has decided to kill the qc and has frozen the port. + * In this state sas_ata_task_done() will no longer free + * the sas_task, so we need to notify the lldd (via + * ->lldd_abort_task) that the task is dead and free it + * ourselves. */ struct sas_task *task = qc->lldd_task; unsigned long flags; @@ -348,7 +414,7 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc) spin_unlock_irqrestore(&task->task_state_lock, flags); task->uldd_task = NULL; - __sas_task_abort(task); + sas_ata_internal_abort(task); } } } diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 15533a17eb9..ba5876ccd29 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -956,49 +956,6 @@ void sas_shutdown_queue(struct sas_ha_struct *sas_ha) spin_unlock_irqrestore(&core->task_queue_lock, flags); } -/* - * Call the LLDD task abort routine directly. This function is intended for - * use by upper layers that need to tell the LLDD to abort a task. - */ -int __sas_task_abort(struct sas_task *task) -{ - struct sas_internal *si = - to_sas_internal(task->dev->port->ha->core.shost->transportt); - unsigned long flags; - int res; - - spin_lock_irqsave(&task->task_state_lock, flags); - if (task->task_state_flags & SAS_TASK_STATE_ABORTED || - task->task_state_flags & SAS_TASK_STATE_DONE) { - spin_unlock_irqrestore(&task->task_state_lock, flags); - SAS_DPRINTK("%s: Task %p already finished.\n", __func__, - task); - return 0; - } - task->task_state_flags |= SAS_TASK_STATE_ABORTED; - spin_unlock_irqrestore(&task->task_state_lock, flags); - - if (!si->dft->lldd_abort_task) - return -ENODEV; - - res = si->dft->lldd_abort_task(task); - - spin_lock_irqsave(&task->task_state_lock, flags); - if ((task->task_state_flags & SAS_TASK_STATE_DONE) || - (res == TMF_RESP_FUNC_COMPLETE)) - { - spin_unlock_irqrestore(&task->task_state_lock, flags); - task->task_done(task); - return 0; - } - - if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) - task->task_state_flags &= ~SAS_TASK_STATE_ABORTED; - spin_unlock_irqrestore(&task->task_state_lock, flags); - - return -EAGAIN; -} - /* * Tell an upper layer that it needs to initiate an abort for a given task. * This should only ever be called by an LLDD. @@ -1097,7 +1054,6 @@ EXPORT_SYMBOL_GPL(sas_slave_configure); EXPORT_SYMBOL_GPL(sas_change_queue_depth); EXPORT_SYMBOL_GPL(sas_change_queue_type); EXPORT_SYMBOL_GPL(sas_bios_param); -EXPORT_SYMBOL_GPL(__sas_task_abort); EXPORT_SYMBOL_GPL(sas_task_abort); EXPORT_SYMBOL_GPL(sas_phy_reset); EXPORT_SYMBOL_GPL(sas_phy_enable); diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 9c13a5c0bb3..10eb2ea7443 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -662,7 +662,6 @@ void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *); void sas_init_dev(struct domain_device *); void sas_task_abort(struct sas_task *); -int __sas_task_abort(struct sas_task *); int sas_eh_device_reset_handler(struct scsi_cmnd *cmd); int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd); -- cgit v1.2.3-70-g09d2 From a3a142524aa4b1539a64a55087bf12ffa4b1f94e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 6 Dec 2011 23:24:42 -0800 Subject: [SCSI] libsas: prevent double completion of scmds from eh MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We invoke task->task_done() to free the task in the eh case, but at this point we are prepared for scsi_eh_flush_done_q() to finish off the scmd. Introduce sas_end_task() to capture the final response status from the lldd and free the task. Also take the opportunity to kill this warning. drivers/scsi/libsas/sas_scsi_host.c: In function ‘sas_end_task’: drivers/scsi/libsas/sas_scsi_host.c:102:3: warning: case value ‘2’ not in enumerated type ‘enum exec_status’ [-Wswitch] Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_scsi_host.c | 61 ++++++++++++++++++++----------------- include/scsi/libsas.h | 5 ++- 2 files changed, 37 insertions(+), 29 deletions(-) diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index ba5876ccd29..50db8f971a0 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -49,27 +49,12 @@ #include #include -/* ---------- SCSI Host glue ---------- */ - -static void sas_scsi_task_done(struct sas_task *task) +/* record final status and free the task */ +static void sas_end_task(struct scsi_cmnd *sc, struct sas_task *task) { struct task_status_struct *ts = &task->task_status; - struct scsi_cmnd *sc = task->uldd_task; int hs = 0, stat = 0; - if (unlikely(task->task_state_flags & SAS_TASK_STATE_ABORTED)) { - /* Aborted tasks will be completed by the error handler */ - SAS_DPRINTK("task done but aborted\n"); - return; - } - - if (unlikely(!sc)) { - SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n"); - list_del_init(&task->list); - sas_free_task(task); - return; - } - if (ts->resp == SAS_TASK_UNDELIVERED) { /* transport error */ hs = DID_NO_CONNECT; @@ -124,10 +109,32 @@ static void sas_scsi_task_done(struct sas_task *task) break; } } - ASSIGN_SAS_TASK(sc, NULL); + sc->result = (hs << 16) | stat; + ASSIGN_SAS_TASK(sc, NULL); list_del_init(&task->list); sas_free_task(task); +} + +static void sas_scsi_task_done(struct sas_task *task) +{ + struct scsi_cmnd *sc = task->uldd_task; + + if (unlikely(task->task_state_flags & SAS_TASK_STATE_ABORTED)) { + /* Aborted tasks will be completed by the error handler */ + SAS_DPRINTK("task done but aborted\n"); + return; + } + + if (unlikely(!sc)) { + SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n"); + list_del_init(&task->list); + sas_free_task(task); + return; + } + + ASSIGN_SAS_TASK(sc, NULL); + sas_end_task(sc, task); sc->scsi_done(sc); } @@ -236,18 +243,16 @@ static void sas_eh_finish_cmd(struct scsi_cmnd *cmd) struct sas_task *task = TO_SAS_TASK(cmd); struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(cmd->device->host); - /* remove the aborted task flag to allow the task to be - * completed now. At this point, we only get called following - * an actual abort of the task, so we should be guaranteed not - * to be racing with any completions from the LLD (hence we - * don't need the task state lock to clear the flag) */ - task->task_state_flags &= ~SAS_TASK_STATE_ABORTED; - /* Now call task_done. However, task will be free'd after - * this */ - task->task_done(task); + /* At this point, we only get called following an actual abort + * of the task, so we should be guaranteed not to be racing with + * any completions from the LLD. Task is freed after this. + */ + sas_end_task(cmd, task); + /* now finish the command and move it on to the error * handler done list, this also takes it off the - * error handler pending list */ + * error handler pending list. + */ scsi_eh_finish_cmd(cmd, &sas_ha->eh_done_q); } diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 10eb2ea7443..071041b290d 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -452,7 +452,10 @@ enum service_response { }; enum exec_status { - /* The SAM_STAT_.. codes fit in the lower 6 bits */ + /* The SAM_STAT_.. codes fit in the lower 6 bits, alias some of + * them here to silence 'case value not in enumerated type' warnings + */ + __SAM_STAT_CHECK_CONDITION = SAM_STAT_CHECK_CONDITION, SAS_DEV_NO_RESPONSE = 0x80, SAS_DATA_UNDERRUN, -- cgit v1.2.3-70-g09d2 From 9095a64a9aead653df320e3a6fc70835c15d46e4 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 28 Nov 2011 11:29:20 -0800 Subject: [SCSI] libsas: fix timeout vs completion race Until we have told the lldd to forget a task a timed out operation can return from the hardware at any time. Since completion frees the task we need to make sure that no tasks run their normal completion handler once eh has decided to manage the task. Similar to ata_scsi_cmd_error_handler() freeze completions to let eh judge the outcome of the race. Task collector mode is problematic because it presents a situation where a task can be timed out and aborted before the lldd has even seen it. For this case we need to guarantee that a task that an lldd has been told to forget does not get queued after the lldd says "never seen it". With sas_scsi_timed_out we achieve this with the ->task_queue_flush mutex, rather than adding more time. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 35 +++++------- drivers/scsi/libsas/sas_internal.h | 1 + drivers/scsi/libsas/sas_scsi_host.c | 104 ++++++++++++++++++------------------ include/scsi/libsas.h | 3 ++ include/scsi/sas_ata.h | 8 --- 5 files changed, 68 insertions(+), 83 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 903bb441b9f..4c2a1402373 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -93,21 +93,30 @@ static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts) static void sas_ata_task_done(struct sas_task *task) { struct ata_queued_cmd *qc = task->uldd_task; - struct domain_device *dev; + struct domain_device *dev = task->dev; struct task_status_struct *stat = &task->task_status; struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf; - struct sas_ha_struct *sas_ha; + struct sas_ha_struct *sas_ha = dev->port->ha; enum ata_completion_errors ac; unsigned long flags; struct ata_link *link; struct ata_port *ap; + spin_lock_irqsave(&dev->done_lock, flags); + if (test_bit(SAS_HA_FROZEN, &sas_ha->state)) + task = NULL; + else if (qc && qc->scsicmd) + ASSIGN_SAS_TASK(qc->scsicmd, NULL); + spin_unlock_irqrestore(&dev->done_lock, flags); + + /* check if libsas-eh got to the task before us */ + if (unlikely(!task)) + return; + if (!qc) goto qc_already_gone; ap = qc->ap; - dev = ap->private_data; - sas_ha = dev->port->ha; link = &ap->link; spin_lock_irqsave(ap->lock, flags); @@ -156,8 +165,6 @@ static void sas_ata_task_done(struct sas_task *task) } qc->lldd_task = NULL; - if (qc->scsicmd) - ASSIGN_SAS_TASK(qc->scsicmd, NULL); ata_qc_complete(qc); spin_unlock_irqrestore(ap->lock, flags); @@ -633,22 +640,6 @@ void sas_ata_strategy_handler(struct Scsi_Host *shost) sas_enable_revalidation(sas_ha); } -int sas_ata_timed_out(struct scsi_cmnd *cmd, struct sas_task *task, - enum blk_eh_timer_return *rtn) -{ - struct domain_device *ddev = cmd_to_domain_dev(cmd); - - if (!dev_is_sata(ddev) || task) - return 0; - - /* we're a sata device with no task, so this must be a libata - * eh timeout. Ideally should hook into libata timeout - * handling, but there's no point, it just wants to activate - * the eh thread */ - *rtn = BLK_EH_NOT_HANDLED; - return 1; -} - int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) { diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index ebe9b81ddef..662ffcba99d 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -142,6 +142,7 @@ static inline struct domain_device *sas_alloc_device(void) INIT_LIST_HEAD(&dev->dev_list_node); INIT_LIST_HEAD(&dev->disco_list_node); kref_init(&dev->kref); + spin_lock_init(&dev->done_lock); } return dev; } diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 50db8f971a0..0e3fdba7b51 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -119,9 +119,19 @@ static void sas_end_task(struct scsi_cmnd *sc, struct sas_task *task) static void sas_scsi_task_done(struct sas_task *task) { struct scsi_cmnd *sc = task->uldd_task; + struct domain_device *dev = task->dev; + struct sas_ha_struct *ha = dev->port->ha; + unsigned long flags; + + spin_lock_irqsave(&dev->done_lock, flags); + if (test_bit(SAS_HA_FROZEN, &ha->state)) + task = NULL; + else + ASSIGN_SAS_TASK(sc, NULL); + spin_unlock_irqrestore(&dev->done_lock, flags); - if (unlikely(task->task_state_flags & SAS_TASK_STATE_ABORTED)) { - /* Aborted tasks will be completed by the error handler */ + if (unlikely(!task)) { + /* task will be completed by the error handler */ SAS_DPRINTK("task done but aborted\n"); return; } @@ -133,7 +143,6 @@ static void sas_scsi_task_done(struct sas_task *task) return; } - ASSIGN_SAS_TASK(sc, NULL); sas_end_task(sc, task); sc->scsi_done(sc); } @@ -298,6 +307,7 @@ enum task_disposition { TASK_IS_DONE, TASK_IS_ABORTED, TASK_IS_AT_LU, + TASK_IS_NOT_AT_HA, TASK_IS_NOT_AT_LU, TASK_ABORT_FAILED, }; @@ -314,19 +324,18 @@ static enum task_disposition sas_scsi_find_task(struct sas_task *task) struct scsi_core *core = &ha->core; struct sas_task *t, *n; + mutex_lock(&core->task_queue_flush); spin_lock_irqsave(&core->task_queue_lock, flags); - list_for_each_entry_safe(t, n, &core->task_queue, list) { + list_for_each_entry_safe(t, n, &core->task_queue, list) if (task == t) { list_del_init(&t->list); - spin_unlock_irqrestore(&core->task_queue_lock, - flags); - SAS_DPRINTK("%s: task 0x%p aborted from " - "task_queue\n", - __func__, task); - return TASK_IS_ABORTED; + break; } - } spin_unlock_irqrestore(&core->task_queue_lock, flags); + mutex_unlock(&core->task_queue_flush); + + if (task == t) + return TASK_IS_NOT_AT_HA; } for (i = 0; i < 5; i++) { @@ -499,8 +508,7 @@ try_bus_reset: } static int sas_eh_handle_sas_errors(struct Scsi_Host *shost, - struct list_head *work_q, - struct list_head *done_q) + struct list_head *work_q) { struct scsi_cmnd *cmd, *n; enum task_disposition res = TASK_IS_DONE; @@ -511,7 +519,16 @@ static int sas_eh_handle_sas_errors(struct Scsi_Host *shost, Again: list_for_each_entry_safe(cmd, n, work_q, eh_entry) { - struct sas_task *task = TO_SAS_TASK(cmd); + struct domain_device *dev = cmd_to_domain_dev(cmd); + struct sas_task *task; + + spin_lock_irqsave(&dev->done_lock, flags); + /* by this point the lldd has either observed + * SAS_HA_FROZEN and is leaving the task alone, or has + * won the race with eh and decided to complete it + */ + task = TO_SAS_TASK(cmd); + spin_unlock_irqrestore(&dev->done_lock, flags); if (!task) continue; @@ -534,6 +551,14 @@ Again: cmd->eh_eflags = 0; switch (res) { + case TASK_IS_NOT_AT_HA: + SAS_DPRINTK("%s: task 0x%p is not at ha: %s\n", + __func__, task, + cmd->retries ? "retry" : "aborted"); + if (cmd->retries) + cmd->retries--; + sas_eh_finish_cmd(cmd); + continue; case TASK_IS_DONE: SAS_DPRINTK("%s: task 0x%p is done\n", __func__, task); @@ -635,7 +660,8 @@ void sas_scsi_recover_host(struct Scsi_Host *shost) * Deal with commands that still have SAS tasks (i.e. they didn't * complete via the normal sas_task completion mechanism) */ - if (sas_eh_handle_sas_errors(shost, &eh_work_q, &ha->eh_done_q)) + set_bit(SAS_HA_FROZEN, &ha->state); + if (sas_eh_handle_sas_errors(shost, &eh_work_q)) goto out; /* @@ -649,6 +675,10 @@ void sas_scsi_recover_host(struct Scsi_Host *shost) scsi_eh_ready_devs(shost, &eh_work_q, &ha->eh_done_q); out: + clear_bit(SAS_HA_FROZEN, &ha->state); + if (ha->lldd_max_execute_num > 1) + wake_up_process(ha->core.queue_thread); + /* now link into libata eh --- if we have any ata devices */ sas_ata_strategy_handler(shost); @@ -660,43 +690,7 @@ out: enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd) { - struct sas_task *task = TO_SAS_TASK(cmd); - unsigned long flags; - enum blk_eh_timer_return rtn; - - if (sas_ata_timed_out(cmd, task, &rtn)) - return rtn; - - if (!task) { - cmd->request->timeout /= 2; - SAS_DPRINTK("command 0x%p, task 0x%p, gone: %s\n", - cmd, task, (cmd->request->timeout ? - "BLK_EH_RESET_TIMER" : "BLK_EH_NOT_HANDLED")); - if (!cmd->request->timeout) - return BLK_EH_NOT_HANDLED; - return BLK_EH_RESET_TIMER; - } - - spin_lock_irqsave(&task->task_state_lock, flags); - BUG_ON(task->task_state_flags & SAS_TASK_STATE_ABORTED); - if (task->task_state_flags & SAS_TASK_STATE_DONE) { - spin_unlock_irqrestore(&task->task_state_lock, flags); - SAS_DPRINTK("command 0x%p, task 0x%p, timed out: " - "BLK_EH_HANDLED\n", cmd, task); - return BLK_EH_HANDLED; - } - if (!(task->task_state_flags & SAS_TASK_AT_INITIATOR)) { - spin_unlock_irqrestore(&task->task_state_lock, flags); - SAS_DPRINTK("command 0x%p, task 0x%p, not at initiator: " - "BLK_EH_RESET_TIMER\n", - cmd, task); - return BLK_EH_RESET_TIMER; - } - task->task_state_flags |= SAS_TASK_STATE_ABORTED; - spin_unlock_irqrestore(&task->task_state_lock, flags); - - SAS_DPRINTK("command 0x%p, task 0x%p, timed out: BLK_EH_NOT_HANDLED\n", - cmd, task); + scmd_printk(KERN_DEBUG, cmd, "command %p timed out\n", cmd); return BLK_EH_NOT_HANDLED; } @@ -861,9 +855,11 @@ static void sas_queue(struct sas_ha_struct *sas_ha) int res; struct sas_internal *i = to_sas_internal(core->shost->transportt); + mutex_lock(&core->task_queue_flush); spin_lock_irqsave(&core->task_queue_lock, flags); while (!kthread_should_stop() && - !list_empty(&core->task_queue)) { + !list_empty(&core->task_queue) && + !test_bit(SAS_HA_FROZEN, &sas_ha->state)) { can_queue = sas_ha->lldd_queue_size - core->task_queue_size; if (can_queue >= 0) { @@ -899,6 +895,7 @@ static void sas_queue(struct sas_ha_struct *sas_ha) } } spin_unlock_irqrestore(&core->task_queue_lock, flags); + mutex_unlock(&core->task_queue_flush); } /** @@ -925,6 +922,7 @@ int sas_init_queue(struct sas_ha_struct *sas_ha) struct scsi_core *core = &sas_ha->core; spin_lock_init(&core->task_queue_lock); + mutex_init(&core->task_queue_flush); core->task_queue_size = 0; INIT_LIST_HEAD(&core->task_queue); diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 071041b290d..aa7192ff435 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -178,6 +178,7 @@ enum { }; struct domain_device { + spinlock_t done_lock; enum sas_dev_type dev_type; enum sas_linkrate linkrate; @@ -321,6 +322,7 @@ struct asd_sas_phy { struct scsi_core { struct Scsi_Host *shost; + struct mutex task_queue_flush; spinlock_t task_queue_lock; struct list_head task_queue; int task_queue_size; @@ -337,6 +339,7 @@ enum sas_ha_state { SAS_HA_REGISTERED, SAS_HA_DRAINING, SAS_HA_ATA_EH_ACTIVE, + SAS_HA_FROZEN, }; struct sas_ha_struct { diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h index 557fc9a8559..9f7a23d1146 100644 --- a/include/scsi/sas_ata.h +++ b/include/scsi/sas_ata.h @@ -41,8 +41,6 @@ int sas_ata_init_host_and_port(struct domain_device *found_dev, void sas_ata_task_abort(struct sas_task *task); void sas_ata_strategy_handler(struct Scsi_Host *shost); -int sas_ata_timed_out(struct scsi_cmnd *cmd, struct sas_task *task, - enum blk_eh_timer_return *rtn); int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q); void sas_probe_sata(struct work_struct *work); @@ -67,12 +65,6 @@ static inline void sas_ata_strategy_handler(struct Scsi_Host *shost) { } -static inline int sas_ata_timed_out(struct scsi_cmnd *cmd, - struct sas_task *task, - enum blk_eh_timer_return *rtn) -{ - return 0; -} static inline int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) { -- cgit v1.2.3-70-g09d2 From 3944f50995f947558c35fb16ae0288354756762c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 29 Nov 2011 12:08:50 -0800 Subject: [SCSI] libsas: let libata handle command timeouts libsas-eh if it successfully aborts an ata command will hide the timeout condition (AC_ERR_TIMEOUT) from libata. The command likely completes with the all-zero task->task_status it started with. Instead, interpret a TMF_RESP_FUNC_COMPLETE as the end of the sas_task but keep the scmd around for libata-eh to handle. Tested-by: Andrzej Jakowski Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_init.c | 1 + drivers/scsi/libsas/sas_scsi_host.c | 22 ++++++++++++++++++++-- include/scsi/libsas.h | 3 ++- 3 files changed, 23 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index 52cd11d7666..e17fe35af30 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -146,6 +146,7 @@ int sas_register_ha(struct sas_ha_struct *sas_ha) } INIT_LIST_HEAD(&sas_ha->eh_done_q); + INIT_LIST_HEAD(&sas_ha->eh_ata_q); return 0; diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 0e3fdba7b51..e02ca3d570f 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -265,6 +265,22 @@ static void sas_eh_finish_cmd(struct scsi_cmnd *cmd) scsi_eh_finish_cmd(cmd, &sas_ha->eh_done_q); } +static void sas_eh_defer_cmd(struct scsi_cmnd *cmd) +{ + struct sas_task *task = TO_SAS_TASK(cmd); + struct domain_device *dev = task->dev; + struct sas_ha_struct *ha = dev->port->ha; + + if (!dev_is_sata(dev)) { + sas_eh_finish_cmd(cmd); + return; + } + + /* report the timeout to libata */ + sas_end_task(cmd, task); + list_move_tail(&cmd->eh_entry, &ha->eh_ata_q); +} + static void sas_scsi_clear_queue_lu(struct list_head *error_q, struct scsi_cmnd *my_cmd) { struct scsi_cmnd *cmd, *n; @@ -562,12 +578,12 @@ Again: case TASK_IS_DONE: SAS_DPRINTK("%s: task 0x%p is done\n", __func__, task); - sas_eh_finish_cmd(cmd); + sas_eh_defer_cmd(cmd); continue; case TASK_IS_ABORTED: SAS_DPRINTK("%s: task 0x%p is aborted\n", __func__, task); - sas_eh_finish_cmd(cmd); + sas_eh_defer_cmd(cmd); continue; case TASK_IS_AT_LU: SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task); @@ -635,12 +651,14 @@ Again: goto clear_q; } } + list_splice_tail_init(&ha->eh_ata_q, work_q); return list_empty(work_q); clear_q: SAS_DPRINTK("--- Exit %s -- clear_q\n", __func__); list_for_each_entry_safe(cmd, n, work_q, eh_entry) sas_eh_finish_cmd(cmd); + list_splice_tail_init(&ha->eh_ata_q, work_q); return list_empty(work_q); } diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index aa7192ff435..6b80310e08a 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -382,7 +382,8 @@ struct sas_ha_struct { void *lldd_ha; /* not touched by sas class code */ - struct list_head eh_done_q; + struct list_head eh_done_q; /* complete via scsi_eh_flush_done_q */ + struct list_head eh_ata_q; /* scmds to promote from sas to ata eh */ }; #define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata) -- cgit v1.2.3-70-g09d2 From 3a2cdf391b62919d3d2862cdce3d70b9a7a99673 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 29 Nov 2011 14:54:28 -0800 Subject: [SCSI] libsas: defer SAS_TASK_NEED_DEV_RESET commands to libata lldds use the SAS_TASK_NEED_DEV_RESET interface to request that eh perform a reset. In the sata device case defer the commands that triggered the reset to libata-eh context so it can perform its pre and post reset management. In the sas_ata_post_internal() case the reset request is falling on deaf ears as the sas_task is immediately destroyed without any reset action. Since it is currently a nop, and likely superfluous given the conversion to new-style libata-eh, just drop the request. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 14 ++++---------- drivers/scsi/libsas/sas_scsi_host.c | 4 ++-- 2 files changed, 6 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 4c2a1402373..a8ace8d24e6 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -411,18 +411,12 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc) * ourselves. */ struct sas_task *task = qc->lldd_task; - unsigned long flags; qc->lldd_task = NULL; - if (task) { - /* Should this be a AT(API) device reset? */ - spin_lock_irqsave(&task->task_state_lock, flags); - task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; - spin_unlock_irqrestore(&task->task_state_lock, flags); - - task->uldd_task = NULL; - sas_ata_internal_abort(task); - } + if (!task) + return; + task->uldd_task = NULL; + sas_ata_internal_abort(task); } } diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index e02ca3d570f..af71a6d0eda 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -288,7 +288,7 @@ static void sas_scsi_clear_queue_lu(struct list_head *error_q, struct scsi_cmnd list_for_each_entry_safe(cmd, n, error_q, eh_entry) { if (cmd->device->sdev_target == my_cmd->device->sdev_target && cmd->device->lun == my_cmd->device->lun) - sas_eh_finish_cmd(cmd); + sas_eh_defer_cmd(cmd); } } @@ -594,7 +594,7 @@ Again: "recovered\n", SAS_ADDR(task->dev), cmd->device->lun); - sas_eh_finish_cmd(cmd); + sas_eh_defer_cmd(cmd); sas_scsi_clear_queue_lu(work_q, cmd); goto Again; } -- cgit v1.2.3-70-g09d2 From b52df4174dff7e587f6fbfb21e3c2cb57109e5cf Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 30 Nov 2011 23:23:33 -0800 Subject: [SCSI] libsas: use libata-eh-reset for sata rediscovery fis transmit failures Since sata devices can take several seconds to recover the link on reset the 0.5 seconds that libsas currently waits may not be enough. Instead if we are rediscovering a phy that was previously attached to a sata device let libata handle any resets to encourage the device to transmit the initial fis. Once sas_ata_hard_reset() and lldds learn how to honor 'deadline' libsas should stop encountering phys in an intermediate state, until then this will loop until the fis is transmitted or ->attached_sas_addr gets cleared, but in the more likely initial discovery case we keep existing behavior. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 19 ++++++++++++++++ drivers/scsi/libsas/sas_expander.c | 44 +++++++++++++++++++++++++++++++++----- include/scsi/sas_ata.h | 6 +++++- 3 files changed, 63 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index a8ace8d24e6..48cadf88c39 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -679,3 +679,22 @@ int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, return rtn; } + +void sas_ata_schedule_reset(struct domain_device *dev) +{ + struct ata_eh_info *ehi; + struct ata_port *ap; + unsigned long flags; + + if (!dev_is_sata(dev)) + return; + + ap = dev->sata_dev.ap; + ehi = &ap->link.eh_info; + + spin_lock_irqsave(ap->lock, flags); + ehi->err_mask |= AC_ERR_TIMEOUT; + ehi->action |= ATA_EH_RESET; + ata_port_schedule_eh(ap); + spin_unlock_irqrestore(ap->lock, flags); +} diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index e45b259dac4..f4894b0f537 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -28,6 +28,7 @@ #include "sas_internal.h" +#include #include #include #include "../scsi_sas_internal.h" @@ -226,12 +227,35 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, return; } +/* check if we have an existing attached ata device on this expander phy */ +static struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id) +{ + struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy_id]; + struct domain_device *dev; + struct sas_rphy *rphy; + + if (!ex_phy->port) + return NULL; + + rphy = ex_phy->port->rphy; + if (!rphy) + return NULL; + + dev = sas_find_dev_by_rphy(rphy); + + if (dev && dev_is_sata(dev)) + return dev; + + return NULL; +} + #define DISCOVER_REQ_SIZE 16 #define DISCOVER_RESP_SIZE 56 static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req, u8 *disc_resp, int single) { + struct domain_device *ata_dev = sas_ex_to_ata(dev, single); int i, res; disc_req[9] = single; @@ -242,20 +266,30 @@ static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req, disc_resp, DISCOVER_RESP_SIZE); if (res) return res; - /* This is detecting a failure to transmit initial - * dev to host FIS as described in section G.5 of - * sas-2 r 04b */ dr = &((struct smp_resp *)disc_resp)->disc; if (memcmp(dev->sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE) == 0) { sas_printk("Found loopback topology, just ignore it!\n"); return 0; } + + /* This is detecting a failure to transmit initial + * dev to host FIS as described in section J.5 of + * sas-2 r16 + */ if (!(dr->attached_dev_type == 0 && dr->attached_sata_dev)) break; - /* In order to generate the dev to host FIS, we - * send a link reset to the expander port */ + + /* In order to generate the dev to host FIS, we send a + * link reset to the expander port. If a device was + * previously detected on this port we ask libata to + * manage the reset and link recovery. + */ + if (ata_dev) { + sas_ata_schedule_reset(ata_dev); + break; + } sas_smp_phy_control(dev, single, PHY_FUNC_LINK_RESET, NULL); /* Wait for the reset to trigger the negotiation */ msleep(500); diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h index 9f7a23d1146..c0bcd30eec5 100644 --- a/include/scsi/sas_ata.h +++ b/include/scsi/sas_ata.h @@ -44,7 +44,7 @@ void sas_ata_strategy_handler(struct Scsi_Host *shost); int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q); void sas_probe_sata(struct work_struct *work); - +void sas_ata_schedule_reset(struct domain_device *dev); #else @@ -75,6 +75,10 @@ static inline void sas_probe_sata(struct work_struct *work) { } +static inline void sas_ata_schedule_reset(struct domain_device *dev) +{ +} + #endif #endif /* _SAS_ATA_H_ */ -- cgit v1.2.3-70-g09d2 From 0b3e09da1350397f3f8b6fd839ab455b0b587451 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 Dec 2011 01:03:48 -0800 Subject: [SCSI] libsas: perform sas-transport resets in shost->workq context Extend the sas transport class to allow transport users to attach extra data to a sas_phy (->hostdata). Use this area in libsas to move resets to workq context in preparation for scheduling ata device resets through libata-eh. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_event.c | 2 +- drivers/scsi/libsas/sas_init.c | 59 +++++++++++++++++++++++++++++++++++++- drivers/scsi/libsas/sas_internal.h | 10 +++++++ drivers/scsi/scsi_transport_sas.c | 18 +++++++++++- include/scsi/scsi_transport_sas.h | 5 +++- 5 files changed, 90 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c index 933d757499b..dbfaceeea0f 100644 --- a/drivers/scsi/libsas/sas_event.c +++ b/drivers/scsi/libsas/sas_event.c @@ -27,7 +27,7 @@ #include "sas_internal.h" #include "sas_dump.h" -static void sas_queue_work(struct sas_ha_struct *ha, struct work_struct *work) +void sas_queue_work(struct sas_ha_struct *ha, struct work_struct *work) { if (!test_bit(SAS_HA_REGISTERED, &ha->state)) return; diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index e17fe35af30..cb65adf4ab1 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -290,9 +290,66 @@ int sas_set_phy_speed(struct sas_phy *phy, return ret; } +static void sas_phy_release(struct sas_phy *phy) +{ + kfree(phy->hostdata); + phy->hostdata = NULL; +} + +static void phy_reset_work(struct work_struct *work) +{ + struct sas_phy_data *d = container_of(work, typeof(*d), reset_work); + + d->reset_result = sas_phy_reset(d->phy, d->hard_reset); +} + +static int sas_phy_setup(struct sas_phy *phy) +{ + struct sas_phy_data *d = kzalloc(sizeof(*d), GFP_KERNEL); + + if (!d) + return -ENOMEM; + + mutex_init(&d->event_lock); + INIT_WORK(&d->reset_work, phy_reset_work); + d->phy = phy; + phy->hostdata = d; + + return 0; +} + +static int queue_phy_reset(struct sas_phy *phy, int hard_reset) +{ + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); + struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); + struct sas_phy_data *d = phy->hostdata; + int rc; + + if (!d) + return -ENOMEM; + + /* libsas workqueue coordinates ata-eh reset with discovery */ + mutex_lock(&d->event_lock); + d->reset_result = 0; + d->hard_reset = hard_reset; + + spin_lock_irq(&ha->state_lock); + sas_queue_work(ha, &d->reset_work); + spin_unlock_irq(&ha->state_lock); + + rc = sas_drain_work(ha); + if (rc == 0) + rc = d->reset_result; + mutex_unlock(&d->event_lock); + + return rc; +} + static struct sas_function_template sft = { .phy_enable = sas_phy_enable, - .phy_reset = sas_phy_reset, + .phy_reset = queue_phy_reset, + .phy_setup = sas_phy_setup, + .phy_release = sas_phy_release, .set_phy_speed = sas_set_phy_speed, .get_linkerrors = sas_get_linkerrors, .smp_handler = sas_smp_handler, diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 662ffcba99d..9ba65e0c6f9 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -38,6 +38,15 @@ #define TO_SAS_TASK(_scsi_cmd) ((void *)(_scsi_cmd)->host_scribble) #define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0) +struct sas_phy_data { + /* let reset be performed in sas_queue_work() context */ + struct sas_phy *phy; + struct mutex event_lock; + int hard_reset; + int reset_result; + struct work_struct reset_work; +}; + void sas_scsi_recover_host(struct Scsi_Host *shost); int sas_show_class(enum sas_class class, char *buf); @@ -66,6 +75,7 @@ void sas_porte_broadcast_rcvd(struct work_struct *work); void sas_porte_link_reset_err(struct work_struct *work); void sas_porte_timer_event(struct work_struct *work); void sas_porte_hard_reset(struct work_struct *work); +void sas_queue_work(struct sas_ha_struct *ha, struct work_struct *work); int sas_notify_lldd_dev_found(struct domain_device *); void sas_notify_lldd_dev_gone(struct domain_device *); diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 9421bae8af1..ab3bd0b5ffd 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -652,9 +652,21 @@ sas_phy_linkerror_attr(running_disparity_error_count); sas_phy_linkerror_attr(loss_of_dword_sync_count); sas_phy_linkerror_attr(phy_reset_problem_count); +static int sas_phy_setup(struct transport_container *tc, struct device *dev, + struct device *cdev) +{ + struct sas_phy *phy = dev_to_phy(dev); + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); + struct sas_internal *i = to_sas_internal(shost->transportt); + + if (i->f->phy_setup) + i->f->phy_setup(phy); + + return 0; +} static DECLARE_TRANSPORT_CLASS(sas_phy_class, - "sas_phy", NULL, NULL, NULL); + "sas_phy", sas_phy_setup, NULL, NULL); static int sas_phy_match(struct attribute_container *cont, struct device *dev) { @@ -678,7 +690,11 @@ static int sas_phy_match(struct attribute_container *cont, struct device *dev) static void sas_phy_release(struct device *dev) { struct sas_phy *phy = dev_to_phy(dev); + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); + struct sas_internal *i = to_sas_internal(shost->transportt); + if (i->f->phy_release) + i->f->phy_release(phy); put_device(dev->parent); kfree(phy); } diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h index 6d14daac758..42817facaed 100644 --- a/include/scsi/scsi_transport_sas.h +++ b/include/scsi/scsi_transport_sas.h @@ -75,7 +75,8 @@ struct sas_phy { /* for the list of phys belonging to a port */ struct list_head port_siblings; - struct work_struct reset_work; + /* available to the lldd */ + void *hostdata; }; #define dev_to_phy(d) \ @@ -169,6 +170,8 @@ struct sas_function_template { int (*get_bay_identifier)(struct sas_rphy *); int (*phy_reset)(struct sas_phy *, int); int (*phy_enable)(struct sas_phy *, int); + int (*phy_setup)(struct sas_phy *); + void (*phy_release)(struct sas_phy *); int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *); int (*smp_handler)(struct Scsi_Host *, struct sas_rphy *, struct request *); }; -- cgit v1.2.3-70-g09d2 From 81c757bc696284f39f07766f0c2ca67af64ce9bd Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 2 Dec 2011 16:07:01 -0800 Subject: [SCSI] libsas: execute transport link resets with libata-eh via host workqueue Link resets leave ata affiliations intact, so arrange for libsas to make an effort to avoid dropping the device due to a slow-to-recover link. Towards this end carry out reset in the host workqueue so that it can check for ata devices and kick the reset request to libata. Hard resets, in contrast, bypass libata since they are meant for associating an ata device with another initiator in the domain (tears down affiliations). Need to add a new transport_sas_phy_reset() since the current sas_phy_reset() is a utility function to libsas lldds. They are not prepared for it to loop back into eh. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/ata/libata-eh.c | 1 + drivers/ata/libata.h | 1 - drivers/scsi/libsas/sas_ata.c | 11 ++++++++ drivers/scsi/libsas/sas_expander.c | 2 +- drivers/scsi/libsas/sas_init.c | 56 +++++++++++++++++++++++++++++++++++++- drivers/scsi/libsas/sas_internal.h | 1 + include/linux/libata.h | 1 + include/scsi/sas_ata.h | 4 +++ 8 files changed, 74 insertions(+), 3 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index a9b28203800..c61316e9d2f 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -863,6 +863,7 @@ void ata_port_wait_eh(struct ata_port *ap) goto retry; } } +EXPORT_SYMBOL_GPL(ata_port_wait_eh); static int ata_eh_nr_in_flight(struct ata_port *ap) { diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 814486d35c4..1fab235ee51 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -151,7 +151,6 @@ extern void ata_eh_acquire(struct ata_port *ap); extern void ata_eh_release(struct ata_port *ap); extern enum blk_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); extern void ata_scsi_error(struct Scsi_Host *host); -extern void ata_port_wait_eh(struct ata_port *ap); extern void ata_eh_fastdrain_timerfn(unsigned long arg); extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc); extern void ata_dev_disable(struct ata_device *dev); diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 48cadf88c39..03930a04a67 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -698,3 +698,14 @@ void sas_ata_schedule_reset(struct domain_device *dev) ata_port_schedule_eh(ap); spin_unlock_irqrestore(ap->lock, flags); } + +void sas_ata_wait_eh(struct domain_device *dev) +{ + struct ata_port *ap; + + if (!dev_is_sata(dev)) + return; + + ap = dev->sata_dev.ap; + ata_port_wait_eh(ap); +} diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index f4894b0f537..d3c1a29b8a2 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -228,7 +228,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, } /* check if we have an existing attached ata device on this expander phy */ -static struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id) +struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id) { struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy_id]; struct domain_device *dev; diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index cb65adf4ab1..a15fb861dab 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -195,6 +196,59 @@ static int sas_get_linkerrors(struct sas_phy *phy) return sas_smp_get_phy_events(phy); } +/** + * transport_sas_phy_reset - reset a phy and permit libata to manage the link + * + * phy reset request via sysfs in host workqueue context so we know we + * can block on eh and safely traverse the domain_device topology + */ +static int transport_sas_phy_reset(struct sas_phy *phy, int hard_reset) +{ + int ret; + enum phy_func reset_type; + + if (hard_reset) + reset_type = PHY_FUNC_HARD_RESET; + else + reset_type = PHY_FUNC_LINK_RESET; + + if (scsi_is_sas_phy_local(phy)) { + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); + struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); + struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number]; + struct sas_internal *i = + to_sas_internal(sas_ha->core.shost->transportt); + struct domain_device *dev = NULL; + + if (asd_phy->port) + dev = asd_phy->port->port_dev; + + /* validate that dev has been probed */ + if (dev) + dev = sas_find_dev_by_rphy(dev->rphy); + + if (dev && dev_is_sata(dev) && !hard_reset) { + sas_ata_schedule_reset(dev); + sas_ata_wait_eh(dev); + ret = 0; + } else + ret = i->dft->lldd_control_phy(asd_phy, reset_type, NULL); + } else { + struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent); + struct domain_device *ddev = sas_find_dev_by_rphy(rphy); + struct domain_device *ata_dev = sas_ex_to_ata(ddev, phy->number); + + if (ata_dev && !hard_reset) { + sas_ata_schedule_reset(ata_dev); + sas_ata_wait_eh(ata_dev); + ret = 0; + } else + ret = sas_smp_phy_control(ddev, phy->number, reset_type, NULL); + } + + return ret; +} + int sas_phy_enable(struct sas_phy *phy, int enable) { int ret; @@ -300,7 +354,7 @@ static void phy_reset_work(struct work_struct *work) { struct sas_phy_data *d = container_of(work, typeof(*d), reset_work); - d->reset_result = sas_phy_reset(d->phy, d->hard_reset); + d->reset_result = transport_sas_phy_reset(d->phy, d->hard_reset); } static int sas_phy_setup(struct sas_phy *phy) diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 9ba65e0c6f9..ae9698d9d85 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -85,6 +85,7 @@ int sas_smp_phy_control(struct domain_device *dev, int phy_id, int sas_smp_get_phy_events(struct sas_phy *phy); struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy); +struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id); void sas_hae_reset(struct work_struct *work); diff --git a/include/linux/libata.h b/include/linux/libata.h index cafc09a64fe..aa427047756 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1147,6 +1147,7 @@ static inline int ata_acpi_cbl_80wire(struct ata_port *ap, * EH - drivers/ata/libata-eh.c */ extern void ata_port_schedule_eh(struct ata_port *ap); +extern void ata_port_wait_eh(struct ata_port *ap); extern int ata_link_abort(struct ata_link *link); extern int ata_port_abort(struct ata_port *ap); extern int ata_port_freeze(struct ata_port *ap); diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h index c0bcd30eec5..da3f3772738 100644 --- a/include/scsi/sas_ata.h +++ b/include/scsi/sas_ata.h @@ -45,6 +45,7 @@ int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q); void sas_probe_sata(struct work_struct *work); void sas_ata_schedule_reset(struct domain_device *dev); +void sas_ata_wait_eh(struct domain_device *dev); #else @@ -79,6 +80,9 @@ static inline void sas_ata_schedule_reset(struct domain_device *dev) { } +static inline void sas_ata_wait_eh(struct domain_device *dev) +{ +} #endif #endif /* _SAS_ATA_H_ */ -- cgit v1.2.3-70-g09d2 From 2a559f4ba443265b4c58925b48296f1cf81b49f9 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 4 Dec 2011 00:06:57 -0800 Subject: [SCSI] libsas: sas_phy_enable via transport_sas_phy_reset Execute the link-reset triggered by sas_phy_enable via transport_sas_phy_reset so that it can be managed by libata. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_init.c | 57 +++++++++++++++++++++++++++++++------ drivers/scsi/libsas/sas_internal.h | 3 ++ drivers/scsi/libsas/sas_scsi_host.c | 1 - include/scsi/libsas.h | 1 - 4 files changed, 52 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index a15fb861dab..53ae893e8b0 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -249,15 +249,15 @@ static int transport_sas_phy_reset(struct sas_phy *phy, int hard_reset) return ret; } -int sas_phy_enable(struct sas_phy *phy, int enable) +static int sas_phy_enable(struct sas_phy *phy, int enable) { int ret; - enum phy_func command; + enum phy_func cmd; if (enable) - command = PHY_FUNC_LINK_RESET; + cmd = PHY_FUNC_LINK_RESET; else - command = PHY_FUNC_DISABLE; + cmd = PHY_FUNC_DISABLE; if (scsi_is_sas_phy_local(phy)) { struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); @@ -266,15 +266,21 @@ int sas_phy_enable(struct sas_phy *phy, int enable) struct sas_internal *i = to_sas_internal(sas_ha->core.shost->transportt); - if (!enable) { + if (enable) + ret = transport_sas_phy_reset(phy, 0); + else { sas_phy_disconnected(asd_phy); sas_ha->notify_phy_event(asd_phy, PHYE_LOSS_OF_SIGNAL); + ret = i->dft->lldd_control_phy(asd_phy, cmd, NULL); } - ret = i->dft->lldd_control_phy(asd_phy, command, NULL); } else { struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent); struct domain_device *ddev = sas_find_dev_by_rphy(rphy); - ret = sas_smp_phy_control(ddev, phy->number, command, NULL); + + if (enable) + ret = transport_sas_phy_reset(phy, 0); + else + ret = sas_smp_phy_control(ddev, phy->number, cmd, NULL); } return ret; } @@ -357,6 +363,13 @@ static void phy_reset_work(struct work_struct *work) d->reset_result = transport_sas_phy_reset(d->phy, d->hard_reset); } +static void phy_enable_work(struct work_struct *work) +{ + struct sas_phy_data *d = container_of(work, typeof(*d), enable_work); + + d->enable_result = sas_phy_enable(d->phy, d->enable); +} + static int sas_phy_setup(struct sas_phy *phy) { struct sas_phy_data *d = kzalloc(sizeof(*d), GFP_KERNEL); @@ -366,6 +379,7 @@ static int sas_phy_setup(struct sas_phy *phy) mutex_init(&d->event_lock); INIT_WORK(&d->reset_work, phy_reset_work); + INIT_WORK(&d->enable_work, phy_enable_work); d->phy = phy; phy->hostdata = d; @@ -399,8 +413,35 @@ static int queue_phy_reset(struct sas_phy *phy, int hard_reset) return rc; } +static int queue_phy_enable(struct sas_phy *phy, int enable) +{ + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); + struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); + struct sas_phy_data *d = phy->hostdata; + int rc; + + if (!d) + return -ENOMEM; + + /* libsas workqueue coordinates ata-eh reset with discovery */ + mutex_lock(&d->event_lock); + d->enable_result = 0; + d->enable = enable; + + spin_lock_irq(&ha->state_lock); + sas_queue_work(ha, &d->enable_work); + spin_unlock_irq(&ha->state_lock); + + rc = sas_drain_work(ha); + if (rc == 0) + rc = d->enable_result; + mutex_unlock(&d->event_lock); + + return rc; +} + static struct sas_function_template sft = { - .phy_enable = sas_phy_enable, + .phy_enable = queue_phy_enable, .phy_reset = queue_phy_reset, .phy_setup = sas_phy_setup, .phy_release = sas_phy_release, diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index ae9698d9d85..9e960b2d535 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -45,6 +45,9 @@ struct sas_phy_data { int hard_reset; int reset_result; struct work_struct reset_work; + int enable; + int enable_result; + struct work_struct enable_work; }; void sas_scsi_recover_host(struct Scsi_Host *shost); diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index af71a6d0eda..5cc44fddfe9 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -1077,7 +1077,6 @@ EXPORT_SYMBOL_GPL(sas_change_queue_type); EXPORT_SYMBOL_GPL(sas_bios_param); EXPORT_SYMBOL_GPL(sas_task_abort); EXPORT_SYMBOL_GPL(sas_phy_reset); -EXPORT_SYMBOL_GPL(sas_phy_enable); EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler); EXPORT_SYMBOL_GPL(sas_eh_bus_reset_handler); EXPORT_SYMBOL_GPL(sas_slave_alloc); diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 6b80310e08a..f388ba53612 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -634,7 +634,6 @@ extern int sas_unregister_ha(struct sas_ha_struct *); int sas_set_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates); -int sas_phy_enable(struct sas_phy *phy, int enabled); int sas_phy_reset(struct sas_phy *phy, int hard_reset); int sas_queue_up(struct sas_task *task); extern int sas_queuecommand(struct Scsi_Host * ,struct scsi_cmnd *); -- cgit v1.2.3-70-g09d2 From 1f4fe89c9c78d3163cf1e389bdc6438a44b64244 Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Fri, 16 Dec 2011 08:21:21 +0000 Subject: [SCSI] libsas: Remove redundant phy state notification calls. In the case of an explicit sas_phy_enable call to disable a phy, the LLDD provides the calls to sas_phy_disconnected and the PHYE_LOSS_OF_SIGNAL event. NOTE: This assumes that the lldd(s) generate the notification, which appears to be the case, but only verfied on isci. Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_init.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index 53ae893e8b0..cf1b532b0e7 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -268,11 +268,8 @@ static int sas_phy_enable(struct sas_phy *phy, int enable) if (enable) ret = transport_sas_phy_reset(phy, 0); - else { - sas_phy_disconnected(asd_phy); - sas_ha->notify_phy_event(asd_phy, PHYE_LOSS_OF_SIGNAL); + else ret = i->dft->lldd_control_phy(asd_phy, cmd, NULL); - } } else { struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent); struct domain_device *ddev = sas_find_dev_by_rphy(rphy); -- cgit v1.2.3-70-g09d2 From 89d3cf6ac3cdc4f15a82709f8c78ed169a98be5b Mon Sep 17 00:00:00 2001 From: Jeff Skirvin Date: Wed, 16 Nov 2011 09:44:13 +0000 Subject: [SCSI] libsas: add mutex for SMP task execution SAS does not tag SMP requests, and at least one lldd (isci) does not permit more than one in-flight request at a time. [jejb: fix sas_init_dev tab issues while we're at it] Signed-off-by: Jeff Skirvin Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_discover.c | 31 ++++++++++++++++--------------- drivers/scsi/libsas/sas_expander.c | 29 ++++++++++++++++------------- include/scsi/libsas.h | 2 ++ 3 files changed, 34 insertions(+), 28 deletions(-) diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index bad5eba4a92..c56cc640081 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -37,21 +37,22 @@ void sas_init_dev(struct domain_device *dev) { - switch (dev->dev_type) { - case SAS_END_DEV: - break; - case EDGE_DEV: - case FANOUT_DEV: - INIT_LIST_HEAD(&dev->ex_dev.children); - break; - case SATA_DEV: - case SATA_PM: - case SATA_PM_PORT: - INIT_LIST_HEAD(&dev->sata_dev.children); - break; - default: - break; - } + switch (dev->dev_type) { + case SAS_END_DEV: + break; + case EDGE_DEV: + case FANOUT_DEV: + INIT_LIST_HEAD(&dev->ex_dev.children); + mutex_init(&dev->ex_dev.cmd_mutex); + break; + case SATA_DEV: + case SATA_PM: + case SATA_PM_PORT: + INIT_LIST_HEAD(&dev->sata_dev.children); + break; + default: + break; + } } /* ---------- Domain device discovery ---------- */ diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index d3c1a29b8a2..7c59f97c028 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -72,11 +72,13 @@ static int smp_execute_task(struct domain_device *dev, void *req, int req_size, struct sas_internal *i = to_sas_internal(dev->port->ha->core.shost->transportt); + mutex_lock(&dev->ex_dev.cmd_mutex); for (retry = 0; retry < 3; retry++) { task = sas_alloc_task(GFP_KERNEL); - if (!task) - return -ENOMEM; - + if (!task) { + res = -ENOMEM; + break; + } task->dev = dev; task->task_proto = dev->tproto; sg_init_one(&task->smp_task.smp_req, req, req_size); @@ -94,7 +96,7 @@ static int smp_execute_task(struct domain_device *dev, void *req, int req_size, if (res) { del_timer(&task->timer); SAS_DPRINTK("executing SMP task failed:%d\n", res); - goto ex_err; + break; } wait_for_completion(&task->completion); @@ -104,21 +106,23 @@ static int smp_execute_task(struct domain_device *dev, void *req, int req_size, i->dft->lldd_abort_task(task); if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { SAS_DPRINTK("SMP task aborted and not done\n"); - goto ex_err; + break; } } if (task->task_status.resp == SAS_TASK_COMPLETE && task->task_status.stat == SAM_STAT_GOOD) { res = 0; break; - } if (task->task_status.resp == SAS_TASK_COMPLETE && - task->task_status.stat == SAS_DATA_UNDERRUN) { + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAS_DATA_UNDERRUN) { /* no error, but return the number of bytes of * underrun */ res = task->task_status.residual; break; - } if (task->task_status.resp == SAS_TASK_COMPLETE && - task->task_status.stat == SAS_DATA_OVERRUN) { + } + if (task->task_status.resp == SAS_TASK_COMPLETE && + task->task_status.stat == SAS_DATA_OVERRUN) { res = -EMSGSIZE; break; } else { @@ -131,11 +135,10 @@ static int smp_execute_task(struct domain_device *dev, void *req, int req_size, task = NULL; } } -ex_err: + mutex_unlock(&dev->ex_dev.cmd_mutex); + BUG_ON(retry == 3 && task != NULL); - if (task != NULL) { - sas_free_task(task); - } + sas_free_task(task); return res; } diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index f388ba53612..18704a2e4f0 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -153,6 +153,8 @@ struct expander_device { struct ex_phy *ex_phy; struct sas_port *parent_port; + + struct mutex cmd_mutex; }; /* ---------- SATA device ---------- */ -- cgit v1.2.3-70-g09d2 From 50824d6c5657ce340e3911171865a8d99fdd8eba Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 4 Dec 2011 01:06:24 -0800 Subject: [SCSI] libsas: async ata-eh Once sas_ata_hard_reset() starts honoring the 'deadline' parameter a pathological configuration could take 25 seconds per ata device (serialized) to recover. Run per-port recoveries in parallel. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 03930a04a67..4beca66728b 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -23,6 +23,7 @@ #include #include +#include #include #include "sas_internal.h" @@ -605,10 +606,21 @@ int sas_discover_sata(struct domain_device *dev) return 0; } +static void async_sas_ata_eh(void *data, async_cookie_t cookie) +{ + struct domain_device *dev = data; + struct ata_port *ap = dev->sata_dev.ap; + struct sas_ha_struct *ha = dev->port->ha; + + ata_port_printk(ap, KERN_DEBUG, "sas eh calling libata port error handler"); + ata_scsi_port_error_handler(ha->core.shost, ap); +} + void sas_ata_strategy_handler(struct Scsi_Host *shost) { struct scsi_device *sdev; struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); + LIST_HEAD(async); /* it's ok to defer revalidation events during ata eh, these * disks are in one of three states: @@ -622,14 +634,13 @@ void sas_ata_strategy_handler(struct Scsi_Host *shost) shost_for_each_device(sdev, shost) { struct domain_device *ddev = sdev_to_domain_dev(sdev); - struct ata_port *ap = ddev->sata_dev.ap; if (!dev_is_sata(ddev)) continue; - ata_port_printk(ap, KERN_DEBUG, "sas eh calling libata port error handler"); - ata_scsi_port_error_handler(shost, ap); + async_schedule_domain(async_sas_ata_eh, ddev, &async); } + async_synchronize_full_domain(&async); sas_enable_revalidation(sas_ha); } -- cgit v1.2.3-70-g09d2 From 36a399473902a57218dc493c5a814708a56b73ab Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Nov 2011 17:59:54 -0800 Subject: [SCSI] libsas: poll for ata device readiness after reset Use ata_wait_after_reset() to poll for link recovery after a reset. This combined with sas_ha->eh_mutex prevents expander rediscovery from probing phys in an intermediate state. Local discovery does not have a mechanism to filter link status changes during this timeout, so it remains the responsibility of lldds to prevent premature port teardown. Although once all lldd's support ->lldd_ata_check_ready() that could be used as a gate to local port teardown. The signature fis is re-transmitted when the link comes back so we should be revalidating the ata device class, but that is left to a future patch. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 104 ++++++++++++++++++++++++++----------- drivers/scsi/libsas/sas_expander.c | 10 ++-- drivers/scsi/libsas/sas_internal.h | 3 +- include/scsi/libsas.h | 1 + 4 files changed, 83 insertions(+), 35 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 4beca66728b..5fdb63ad94b 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -272,39 +272,84 @@ static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc) return true; } -static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, - unsigned long deadline) +static struct sas_internal *dev_to_sas_internal(struct domain_device *dev) +{ + return to_sas_internal(dev->port->ha->core.shost->transportt); +} + +static int smp_ata_check_ready(struct ata_link *link) { + int res; + u8 addr[8]; struct ata_port *ap = link->ap; struct domain_device *dev = ap->private_data; - struct sas_internal *i = - to_sas_internal(dev->port->ha->core.shost->transportt); - int res = TMF_RESP_FUNC_FAILED; - int ret = 0; + struct domain_device *ex_dev = dev->parent; + struct sas_phy *phy = sas_find_local_phy(dev); - if (i->dft->lldd_I_T_nexus_reset) - res = i->dft->lldd_I_T_nexus_reset(dev); + res = sas_get_phy_attached_sas_addr(ex_dev, phy->number, addr); + /* break the wait early if the expander is unreachable, + * otherwise keep polling + */ + if (res == -ECOMM) + return res; + if (res != SMP_RESP_FUNC_ACC || SAS_ADDR(addr) == 0) + return 0; + else + return 1; +} - if (res != TMF_RESP_FUNC_COMPLETE) { - SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __func__); - ret = -EAGAIN; +static int local_ata_check_ready(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct domain_device *dev = ap->private_data; + struct sas_internal *i = dev_to_sas_internal(dev); + + if (i->dft->lldd_ata_check_ready) + return i->dft->lldd_ata_check_ready(dev); + else { + /* lldd's that don't implement 'ready' checking get the + * old default behavior of not coordinating reset + * recovery with libata + */ + return 1; } +} +static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int ret = 0, res; + struct ata_port *ap = link->ap; + int (*check_ready)(struct ata_link *link); + struct domain_device *dev = ap->private_data; + struct sas_phy *phy = sas_find_local_phy(dev); + struct sas_internal *i = dev_to_sas_internal(dev); + + res = i->dft->lldd_I_T_nexus_reset(dev); + + if (res != TMF_RESP_FUNC_COMPLETE) + SAS_DPRINTK("%s: Unable to reset ata device?\n", __func__); + + if (scsi_is_sas_phy_local(phy)) + check_ready = local_ata_check_ready; + else + check_ready = smp_ata_check_ready; + + ret = ata_wait_after_reset(link, deadline, check_ready); + if (ret && ret != -EAGAIN) + ata_link_err(link, "COMRESET failed (errno=%d)\n", ret); + + /* XXX: if the class changes during the reset the upper layer + * should be informed, if the device has gone away we assume + * libsas will eventually delete it + */ switch (dev->sata_dev.command_set) { - case ATA_COMMAND_SET: - SAS_DPRINTK("%s: Found ATA device.\n", __func__); - *class = ATA_DEV_ATA; - break; - case ATAPI_COMMAND_SET: - SAS_DPRINTK("%s: Found ATAPI device.\n", __func__); - *class = ATA_DEV_ATAPI; - break; - default: - SAS_DPRINTK("%s: Unknown SATA command set: %d.\n", - __func__, - dev->sata_dev.command_set); - *class = ATA_DEV_UNKNOWN; - break; + case ATA_COMMAND_SET: + *class = ATA_DEV_ATA; + break; + case ATAPI_COMMAND_SET: + *class = ATA_DEV_ATAPI; + break; } ap->cbl = ATA_CBL_SATA; @@ -316,8 +361,7 @@ static int sas_ata_soft_reset(struct ata_link *link, unsigned int *class, { struct ata_port *ap = link->ap; struct domain_device *dev = ap->private_data; - struct sas_internal *i = - to_sas_internal(dev->port->ha->core.shost->transportt); + struct sas_internal *i = dev_to_sas_internal(dev); int res = TMF_RESP_FUNC_FAILED; int ret = 0; @@ -355,8 +399,7 @@ static int sas_ata_soft_reset(struct ata_link *link, unsigned int *class, */ static void sas_ata_internal_abort(struct sas_task *task) { - struct sas_internal *si = - to_sas_internal(task->dev->port->ha->core.shost->transportt); + struct sas_internal *si = dev_to_sas_internal(task->dev); unsigned long flags; int res; @@ -425,8 +468,7 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc) static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev) { struct domain_device *dev = ap->private_data; - struct sas_internal *i = - to_sas_internal(dev->port->ha->core.shost->transportt); + struct sas_internal *i = dev_to_sas_internal(dev); if (i->dft->lldd_ata_set_dmamode) i->dft->lldd_ata_set_dmamode(dev); diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 7c59f97c028..32e417e6c2f 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -125,7 +125,11 @@ static int smp_execute_task(struct domain_device *dev, void *req, int req_size, task->task_status.stat == SAS_DATA_OVERRUN) { res = -EMSGSIZE; break; - } else { + } + if (task->task_status.resp == SAS_TASK_UNDELIVERED && + task->task_status.stat == SAS_DEVICE_UNKNOWN) + break; + else { SAS_DPRINTK("%s: task to dev %016llx response: 0x%x " "status 0x%x\n", __func__, SAS_ADDR(dev->sas_addr), @@ -1648,8 +1652,8 @@ static int sas_get_phy_change_count(struct domain_device *dev, return res; } -static int sas_get_phy_attached_sas_addr(struct domain_device *dev, - int phy_id, u8 *attached_sas_addr) +int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id, + u8 *attached_sas_addr) { int res; struct smp_resp *disc_resp; diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 9e960b2d535..a9a3bb94c1b 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -89,7 +89,8 @@ int sas_smp_get_phy_events(struct sas_phy *phy); struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy); struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id); - +int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id, + u8 *attached_sas_addr); void sas_hae_reset(struct work_struct *work); void sas_free_device(struct kref *kref); diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 18704a2e4f0..2079b18467a 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -615,6 +615,7 @@ struct sas_domain_function_template { int (*lldd_clear_task_set)(struct domain_device *, u8 *lun); int (*lldd_I_T_nexus_reset)(struct domain_device *); int (*lldd_ata_soft_reset)(struct domain_device *); + int (*lldd_ata_check_ready)(struct domain_device *); void (*lldd_ata_set_dmamode)(struct domain_device *); int (*lldd_lu_reset)(struct domain_device *, u8 *lun); int (*lldd_query_task)(struct sas_task *); -- cgit v1.2.3-70-g09d2 From 0508c2f3b701f3cd8ed52b2a4abbb2a670f69ce2 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 21 Dec 2011 14:55:38 -0800 Subject: [SCSI] libsas: don't mark expanders as gone when a child device is removed Commit 56dd2c06 "[SCSI] libsas: Don't issue commands to devices that have been hot-removed" marked the parent device of an end-device as gone when all the phys to the end device have been deleted. The expander device is still present until its parent is removed. This is a benign change until the smp_execute_task() path is taught to check ->gone. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_expander.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 32e417e6c2f..7701ab58840 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -1820,7 +1820,6 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent, break; } } - set_bit(SAS_DEV_GONE, &parent->state); sas_disable_routing(parent, phy->attached_sas_addr); } memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); -- cgit v1.2.3-70-g09d2 From 3a9c5560f677690f65038f399f4f598c79b83186 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 21 Dec 2011 15:19:56 -0800 Subject: [SCSI] libsas: check for 'gone' expanders in smp_execute_task() No sense in issuing or retrying commands to an expander that has been removed. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_expander.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 7701ab58840..6fb1f3afd1e 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -74,6 +74,11 @@ static int smp_execute_task(struct domain_device *dev, void *req, int req_size, mutex_lock(&dev->ex_dev.cmd_mutex); for (retry = 0; retry < 3; retry++) { + if (test_bit(SAS_DEV_GONE, &dev->state)) { + res = -ECOMM; + break; + } + task = sas_alloc_task(GFP_KERNEL); if (!task) { res = -ENOMEM; -- cgit v1.2.3-70-g09d2 From f41a0c441c3fe43e79ebeb75584dbb5bfa83e5cd Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 21 Dec 2011 21:33:17 -0800 Subject: [SCSI] libsas: fix sas_find_local_phy(), take phy references In the direct-attached case this routine returns the phy on which this device was first discovered. Which is broken if we want to support wide-targets, as this phy reference can become stale even though the port is still active. In the expander-attached case this routine tries to lookup the phy by scanning the attached sas addresses of the parent expander, and BUG_ONs if it can't find it. However since eh and the libsas workqueue run independently we can still be attempting device recovery via eh after libsas has recorded the device as detached. This is even easier to hit now that eh is blocked while device domain rediscovery takes place, and that libata is fed more timed out commands increasing the chances that it will try to recover the ata device. Arrange for dev->phy to always point to a last known good phy, it may be stale after the port is torn down, but it will catch up for wide port reconfigurations, and never be NULL. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/aic94xx/aic94xx_tmf.c | 9 ++++++--- drivers/scsi/isci/task.c | 9 +++++---- drivers/scsi/libsas/sas_ata.c | 7 +++++-- drivers/scsi/libsas/sas_discover.c | 24 +++++++++++++++++++++++ drivers/scsi/libsas/sas_expander.c | 5 ++++- drivers/scsi/libsas/sas_internal.h | 1 + drivers/scsi/libsas/sas_port.c | 7 +++---- drivers/scsi/libsas/sas_scsi_host.c | 38 ++++++++++++++++++------------------- drivers/scsi/mvsas/mv_sas.c | 3 ++- drivers/scsi/pm8001/pm8001_sas.c | 19 ++++++++++++------- drivers/scsi/scsi_transport_sas.c | 23 ++++++++++++++++++++++ include/scsi/libsas.h | 9 +++++++-- include/scsi/scsi_transport_sas.h | 6 ++++++ 13 files changed, 116 insertions(+), 44 deletions(-) diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c index 0add73bdf2a..50b914ffab9 100644 --- a/drivers/scsi/aic94xx/aic94xx_tmf.c +++ b/drivers/scsi/aic94xx/aic94xx_tmf.c @@ -181,7 +181,7 @@ static int asd_clear_nexus_I_T(struct domain_device *dev, int asd_I_T_nexus_reset(struct domain_device *dev) { int res, tmp_res, i; - struct sas_phy *phy = sas_find_local_phy(dev); + struct sas_phy *phy = sas_get_local_phy(dev); /* Standard mandates link reset for ATA (type 0) and * hard reset for SSP (type 1) */ int reset_type = (dev->dev_type == SATA_DEV || @@ -201,7 +201,7 @@ int asd_I_T_nexus_reset(struct domain_device *dev) for (i = 0 ; i < 3; i++) { tmp_res = asd_clear_nexus_I_T(dev, NEXUS_PHASE_RESUME); if (tmp_res == TC_RESUME) - return res; + goto out; msleep(500); } @@ -211,7 +211,10 @@ int asd_I_T_nexus_reset(struct domain_device *dev) dev_printk(KERN_ERR, &phy->dev, "Failed to resume nexus after reset 0x%x\n", tmp_res); - return TMF_RESP_FUNC_FAILED; + res = TMF_RESP_FUNC_FAILED; + out: + sas_put_local_phy(phy); + return res; } static int asd_clear_nexus_I_T_L(struct domain_device *dev, u8 *lun) diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 4bd88ef83cd..b96e6044eda 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -1332,7 +1332,7 @@ isci_task_request_complete(struct isci_host *ihost, static int isci_reset_device(struct isci_host *ihost, struct isci_remote_device *idev) { - struct sas_phy *phy = sas_find_local_phy(idev->domain_dev); + struct sas_phy *phy = sas_get_local_phy(idev->domain_dev); enum sci_status status; unsigned long flags; int rc; @@ -1347,8 +1347,8 @@ static int isci_reset_device(struct isci_host *ihost, dev_dbg(&ihost->pdev->dev, "%s: sci_remote_device_reset(%p) returned %d!\n", __func__, idev, status); - - return TMF_RESP_FUNC_FAILED; + rc = TMF_RESP_FUNC_FAILED; + goto out; } spin_unlock_irqrestore(&ihost->scic_lock, flags); @@ -1369,7 +1369,8 @@ static int isci_reset_device(struct isci_host *ihost, } dev_dbg(&ihost->pdev->dev, "%s: idev %p complete.\n", __func__, idev); - + out: + sas_put_local_phy(phy); return rc; } diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 5fdb63ad94b..92f7e78a096 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -284,9 +284,10 @@ static int smp_ata_check_ready(struct ata_link *link) struct ata_port *ap = link->ap; struct domain_device *dev = ap->private_data; struct domain_device *ex_dev = dev->parent; - struct sas_phy *phy = sas_find_local_phy(dev); + struct sas_phy *phy = sas_get_local_phy(dev); res = sas_get_phy_attached_sas_addr(ex_dev, phy->number, addr); + sas_put_local_phy(phy); /* break the wait early if the expander is unreachable, * otherwise keep polling */ @@ -319,10 +320,10 @@ static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, unsigned long deadline) { int ret = 0, res; + struct sas_phy *phy; struct ata_port *ap = link->ap; int (*check_ready)(struct ata_link *link); struct domain_device *dev = ap->private_data; - struct sas_phy *phy = sas_find_local_phy(dev); struct sas_internal *i = dev_to_sas_internal(dev); res = i->dft->lldd_I_T_nexus_reset(dev); @@ -330,10 +331,12 @@ static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, if (res != TMF_RESP_FUNC_COMPLETE) SAS_DPRINTK("%s: Unable to reset ata device?\n", __func__); + phy = sas_get_local_phy(dev); if (scsi_is_sas_phy_local(phy)) check_ready = local_ata_check_ready; else check_ready = smp_ata_check_ready; + sas_put_local_phy(phy); ret = ata_wait_after_reset(link, deadline, check_ready); if (ret && ret != -EAGAIN) diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index c56cc640081..789b50861bb 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -147,6 +147,7 @@ static int sas_get_port_device(struct asd_sas_port *port) memset(port->disc.eeds_a, 0, SAS_ADDR_SIZE); memset(port->disc.eeds_b, 0, SAS_ADDR_SIZE); port->disc.max_level = 0; + sas_device_set_phy(dev, port->port); dev->rphy = rphy; @@ -234,6 +235,9 @@ void sas_free_device(struct kref *kref) if (dev->parent) sas_put_device(dev->parent); + sas_port_put_phy(dev->phy); + dev->phy = NULL; + /* remove the phys and ports, everything else should be gone */ if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) kfree(dev->ex_dev.ex_phy); @@ -308,6 +312,26 @@ void sas_unregister_domain_devices(struct asd_sas_port *port) } +void sas_device_set_phy(struct domain_device *dev, struct sas_port *port) +{ + struct sas_ha_struct *ha; + struct sas_phy *new_phy; + + if (!dev) + return; + + ha = dev->port->ha; + new_phy = sas_port_get_phy(port); + + /* pin and record last seen phy */ + spin_lock_irq(&ha->phy_port_lock); + if (new_phy) { + sas_port_put_phy(dev->phy); + dev->phy = new_phy; + } + spin_unlock_irq(&ha->phy_port_lock); +} + /* ---------- Discovery and Revalidation ---------- */ /** diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 6fb1f3afd1e..68a80a00f73 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -723,6 +723,7 @@ static struct domain_device *sas_ex_discover_end_dev( } } sas_ex_get_linkrate(parent, child, phy); + sas_device_set_phy(child, phy->port); #ifdef CONFIG_SCSI_SAS_ATA if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) { @@ -1810,7 +1811,7 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent, { struct expander_device *ex_dev = &parent->ex_dev; struct ex_phy *phy = &ex_dev->ex_phy[phy_id]; - struct domain_device *child, *n; + struct domain_device *child, *n, *found = NULL; if (last) { list_for_each_entry_safe(child, n, &ex_dev->children, siblings) { @@ -1822,6 +1823,7 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent, sas_unregister_ex_tree(parent->port, child); else sas_unregister_dev(parent->port, child); + found = child; break; } } @@ -1830,6 +1832,7 @@ static void sas_unregister_devs_sas_addr(struct domain_device *parent, memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); if (phy->port) { sas_port_delete_phy(phy->port, phy->phy); + sas_device_set_phy(found, phy->port); if (phy->port->num_phys == 0) sas_port_delete(phy->port); phy->port = NULL; diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index a9a3bb94c1b..c8febc71c40 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -87,6 +87,7 @@ int sas_smp_phy_control(struct domain_device *dev, int phy_id, enum phy_func phy_func, struct sas_phy_linkrates *); int sas_smp_get_phy_events(struct sas_phy *phy); +void sas_device_set_phy(struct domain_device *dev, struct sas_port *port); struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy); struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id); int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id, diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index 2980bde4e34..31adcd1b419 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -108,9 +108,6 @@ static void sas_form_port(struct asd_sas_phy *phy) port->num_phys++; port->phy_mask |= (1U << phy->id); - if (!port->phy) - port->phy = phy->phy; - if (*(u64 *)port->attached_sas_addr == 0) { port->class = phy->class; memcpy(port->attached_sas_addr, phy->attached_sas_addr, @@ -175,8 +172,10 @@ void sas_deform_port(struct asd_sas_phy *phy, int gone) sas_unregister_domain_devices(port); sas_port_delete(port->port); port->port = NULL; - } else + } else { sas_port_delete_phy(port->port, phy->phy); + sas_device_set_phy(dev, port->port); + } if (si->dft->lldd_port_deformed) si->dft->lldd_port_deformed(phy); diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 5cc44fddfe9..94ef76316c3 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -439,30 +439,26 @@ static int sas_recover_I_T(struct domain_device *dev) return res; } -/* Find the sas_phy that's attached to this device */ -struct sas_phy *sas_find_local_phy(struct domain_device *dev) +/* take a reference on the last known good phy for this device */ +struct sas_phy *sas_get_local_phy(struct domain_device *dev) { - struct domain_device *pdev = dev->parent; - struct ex_phy *exphy = NULL; - int i; + struct sas_ha_struct *ha = dev->port->ha; + struct sas_phy *phy; + unsigned long flags; - /* Directly attached device */ - if (!pdev) - return dev->port->phy; + /* a published domain device always has a valid phy, it may be + * stale, but it is never NULL + */ + BUG_ON(!dev->phy); - /* Otherwise look in the expander */ - for (i = 0; i < pdev->ex_dev.num_phys; i++) - if (!memcmp(dev->sas_addr, - pdev->ex_dev.ex_phy[i].attached_sas_addr, - SAS_ADDR_SIZE)) { - exphy = &pdev->ex_dev.ex_phy[i]; - break; - } + spin_lock_irqsave(&ha->phy_port_lock, flags); + phy = dev->phy; + get_device(&phy->dev); + spin_unlock_irqrestore(&ha->phy_port_lock, flags); - BUG_ON(!exphy); - return exphy->phy; + return phy; } -EXPORT_SYMBOL_GPL(sas_find_local_phy); +EXPORT_SYMBOL_GPL(sas_get_local_phy); /* Attempt to send a LUN reset message to a device */ int sas_eh_device_reset_handler(struct scsi_cmnd *cmd) @@ -489,7 +485,7 @@ int sas_eh_device_reset_handler(struct scsi_cmnd *cmd) int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd) { struct domain_device *dev = cmd_to_domain_dev(cmd); - struct sas_phy *phy = sas_find_local_phy(dev); + struct sas_phy *phy = sas_get_local_phy(dev); int res; res = sas_phy_reset(phy, 1); @@ -497,6 +493,8 @@ int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd) SAS_DPRINTK("Bus reset of %s failed 0x%x\n", kobject_name(&phy->dev.kobj), res); + sas_put_local_phy(phy); + if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE) return SUCCESS; diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c index cd882230591..b68a65390f0 100644 --- a/drivers/scsi/mvsas/mv_sas.c +++ b/drivers/scsi/mvsas/mv_sas.c @@ -1474,10 +1474,11 @@ static int mvs_debug_issue_ssp_tmf(struct domain_device *dev, static int mvs_debug_I_T_nexus_reset(struct domain_device *dev) { int rc; - struct sas_phy *phy = sas_find_local_phy(dev); + struct sas_phy *phy = sas_get_local_phy(dev); int reset_type = (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) ? 0 : 1; rc = sas_phy_reset(phy, reset_type); + sas_put_local_phy(phy); msleep(2000); return rc; } diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 310860e37d9..3b11edd4a50 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -967,12 +967,14 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev) pm8001_dev = dev->lldd_dev; pm8001_ha = pm8001_find_ha_by_dev(dev); - phy = sas_find_local_phy(dev); + phy = sas_get_local_phy(dev); if (dev_is_sata(dev)) { DECLARE_COMPLETION_ONSTACK(completion_setstate); - if (scsi_is_sas_phy_local(phy)) - return 0; + if (scsi_is_sas_phy_local(phy)) { + rc = 0; + goto out; + } rc = sas_phy_reset(phy, 1); msleep(2000); rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , @@ -981,12 +983,14 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev) rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, pm8001_dev, 0x01); wait_for_completion(&completion_setstate); - } else{ - rc = sas_phy_reset(phy, 1); - msleep(2000); + } else { + rc = sas_phy_reset(phy, 1); + msleep(2000); } PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n", pm8001_dev->device_id, rc)); + out: + sas_put_local_phy(phy); return rc; } @@ -998,10 +1002,11 @@ int pm8001_lu_reset(struct domain_device *dev, u8 *lun) struct pm8001_device *pm8001_dev = dev->lldd_dev; struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); if (dev_is_sata(dev)) { - struct sas_phy *phy = sas_find_local_phy(dev); + struct sas_phy *phy = sas_get_local_phy(dev); rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev , dev, 1, 0); rc = sas_phy_reset(phy, 1); + sas_put_local_phy(phy); rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, pm8001_dev, 0x01); msleep(2000); diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index ab3bd0b5ffd..7d69a25d200 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -1059,6 +1059,29 @@ int scsi_is_sas_port(const struct device *dev) } EXPORT_SYMBOL(scsi_is_sas_port); +/** + * sas_port_get_phy - try to take a reference on a port member + * @port: port to check + */ +struct sas_phy *sas_port_get_phy(struct sas_port *port) +{ + struct sas_phy *phy; + + mutex_lock(&port->phy_list_mutex); + if (list_empty(&port->phy_list)) + phy = NULL; + else { + struct list_head *ent = port->phy_list.next; + + phy = list_entry(ent, typeof(*phy), port_siblings); + get_device(&phy->dev); + } + mutex_unlock(&port->phy_list_mutex); + + return phy; +} +EXPORT_SYMBOL(sas_port_get_phy); + /** * sas_port_add_phy - add another phy to a port to form a wide port * @port: port to add the phy to diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 2079b18467a..55bab863380 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -192,6 +192,7 @@ struct domain_device { struct domain_device *parent; struct list_head siblings; /* devices on the same level */ struct asd_sas_port *port; /* shortcut to root of the tree */ + struct sas_phy *phy; struct list_head dev_list_node; struct list_head disco_list_node; /* awaiting probe or destruct */ @@ -243,7 +244,6 @@ struct asd_sas_port { struct list_head destroy_list; enum sas_linkrate linkrate; - struct sas_phy *phy; struct work_struct work; /* public: */ @@ -429,6 +429,11 @@ static inline unsigned int to_sas_gpio_od(int device, int bit) return 3 * device + bit; } +static inline void sas_put_local_phy(struct sas_phy *phy) +{ + put_device(&phy->dev); +} + #ifdef CONFIG_SCSI_SAS_HOST_SMP int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count); #else @@ -684,7 +689,7 @@ extern int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, extern void sas_ssp_task_response(struct device *dev, struct sas_task *task, struct ssp_response_iu *iu); -struct sas_phy *sas_find_local_phy(struct domain_device *dev); +struct sas_phy *sas_get_local_phy(struct domain_device *dev); int sas_request_addr(struct Scsi_Host *shost, u8 *addr); diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h index 42817facaed..98b3a20a010 100644 --- a/include/scsi/scsi_transport_sas.h +++ b/include/scsi/scsi_transport_sas.h @@ -209,6 +209,12 @@ void sas_port_add_phy(struct sas_port *, struct sas_phy *); void sas_port_delete_phy(struct sas_port *, struct sas_phy *); void sas_port_mark_backlink(struct sas_port *); int scsi_is_sas_port(const struct device *); +struct sas_phy *sas_port_get_phy(struct sas_port *port); +static inline void sas_port_put_phy(struct sas_phy *phy) +{ + if (phy) + put_device(&phy->dev); +} extern struct scsi_transport_template * sas_attach_transport(struct sas_function_template *); -- cgit v1.2.3-70-g09d2 From cb48d672bfeb4147f3e20d5b16fa2eb6377231e2 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 22 Dec 2011 14:58:24 -0800 Subject: [SCSI] libsas: don't recover 'gone' devices in sas_ata_hard_reset() The commands that timeout when a disk is forcibly removed may trigger libata to attempt recovery of the device. If libsas has decided to remove the device don't permit ata to continue to issue resets to its last known phy. The primary motivation for this patch is hotplug testing by writing 0 to /sys/class/sas_phy/phyX/enable. Without this check this test leads to libata issuing a reset and re-enabling the device that wants to be torn down. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 92f7e78a096..0cb538f8478 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -326,6 +326,9 @@ static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, struct domain_device *dev = ap->private_data; struct sas_internal *i = dev_to_sas_internal(dev); + if (test_bit(SAS_DEV_GONE, &dev->state)) + return -ENODEV; + res = i->dft->lldd_I_T_nexus_reset(dev); if (res != TMF_RESP_FUNC_COMPLETE) -- cgit v1.2.3-70-g09d2 From c132f692085ac624d7c8123df781846c8dcb3166 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 3 Jan 2012 23:26:08 -0800 Subject: [SCSI] isci: kill iphy->isci_port lookups This field is a holdover from the OS abstraction conversion. The stable phy to port lookups are done via iphy->ownining_port under scic_lock. After this conversion to use port->lldd_port the only volatile lookup is the initial lookup in isci_port_formed(). After that point any lookup via a successfully notified domain_device is guaranteed to be valid until the domain_device is destroyed. Delete ->start_complete as it is only set once and is set as a consequence of the port going link up, by definition of getting a port formed event the port is "ready". While we are correcting port lookups also move the asd_sas_port table out from under the isci_port. This is to preclude any temptation to use container_of() to convert an asd_sas_port to an isci_port, the association is dynamic and under libsas control. Tested-by: Maciej Trela [dmilburn@redhat.com: fix i686 compile error] Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/host.h | 19 +-------- drivers/scsi/isci/init.c | 7 +--- drivers/scsi/isci/phy.c | 18 ++++++--- drivers/scsi/isci/phy.h | 1 - drivers/scsi/isci/port.c | 84 ++++++++++++++++++++++++++++----------- drivers/scsi/isci/port.h | 2 - drivers/scsi/isci/remote_device.c | 29 ++++---------- 7 files changed, 83 insertions(+), 77 deletions(-) diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 5477f0fa823..adbad69d106 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -187,6 +187,7 @@ struct isci_host { int id; /* unique within a given pci device */ struct isci_phy phys[SCI_MAX_PHYS]; struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */ + struct asd_sas_port sas_ports[SCI_MAX_PORTS]; struct sas_ha_struct sas_ha; spinlock_t state_lock; @@ -393,24 +394,6 @@ static inline int sci_remote_device_node_count(struct isci_remote_device *idev) #define sci_controller_clear_invalid_phy(controller, phy) \ ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index)) -static inline struct device *sciphy_to_dev(struct isci_phy *iphy) -{ - - if (!iphy || !iphy->isci_port || !iphy->isci_port->isci_host) - return NULL; - - return &iphy->isci_port->isci_host->pdev->dev; -} - -static inline struct device *sciport_to_dev(struct isci_port *iport) -{ - - if (!iport || !iport->isci_host) - return NULL; - - return &iport->isci_host->pdev->dev; -} - static inline struct device *scirdev_to_dev(struct isci_remote_device *idev) { if (!idev || !idev->isci_port || !idev->isci_port->isci_host) diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 7ba236e9fab..c20fda09042 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -241,18 +241,13 @@ static int isci_register_sas_ha(struct isci_host *isci_host) if (!sas_ports) return -ENOMEM; - /*----------------- Libsas Initialization Stuff---------------------- - * Set various fields in the sas_ha struct: - */ - sas_ha->sas_ha_name = DRV_NAME; sas_ha->lldd_module = THIS_MODULE; sas_ha->sas_addr = &isci_host->phys[0].sas_addr[0]; - /* set the array of phy and port structs. */ for (i = 0; i < SCI_MAX_PHYS; i++) { sas_phys[i] = &isci_host->phys[i].sas_phy; - sas_ports[i] = &isci_host->ports[i].sas_port; + sas_ports[i] = &isci_host->sas_ports[i]; } sas_ha->sas_phy = sas_phys; diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index fe18acfd6eb..8d412ca689a 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -67,6 +67,14 @@ enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy) return iphy->max_negotiated_speed; } +static struct device *sciphy_to_dev(struct isci_phy *iphy) +{ + struct isci_phy *table = iphy - iphy->phy_index; + struct isci_host *ihost = container_of(table, typeof(*ihost), phys[0]); + + return &ihost->pdev->dev; +} + static enum sci_status sci_phy_transport_layer_initialization(struct isci_phy *iphy, struct scu_transport_layer_registers __iomem *reg) @@ -1299,7 +1307,6 @@ void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index) sas_addr = cpu_to_be64(sci_sas_addr); memcpy(iphy->sas_addr, &sas_addr, sizeof(sas_addr)); - iphy->isci_port = NULL; iphy->sas_phy.enabled = 0; iphy->sas_phy.id = index; iphy->sas_phy.sas_addr = &iphy->sas_addr[0]; @@ -1333,13 +1340,13 @@ int isci_phy_control(struct asd_sas_phy *sas_phy, { int ret = 0; struct isci_phy *iphy = sas_phy->lldd_phy; - struct isci_port *iport = iphy->isci_port; + struct asd_sas_port *port = sas_phy->port; struct isci_host *ihost = sas_phy->ha->lldd_ha; unsigned long flags; dev_dbg(&ihost->pdev->dev, "%s: phy %p; func %d; buf %p; isci phy %p, port %p\n", - __func__, sas_phy, func, buf, iphy, iport); + __func__, sas_phy, func, buf, iphy, port); switch (func) { case PHY_FUNC_DISABLE: @@ -1356,11 +1363,10 @@ int isci_phy_control(struct asd_sas_phy *sas_phy, break; case PHY_FUNC_HARD_RESET: - if (!iport) + if (!port) return -ENODEV; - /* Perform the port reset. */ - ret = isci_port_perform_hard_reset(ihost, iport, iphy); + ret = isci_port_perform_hard_reset(ihost, port->lldd_port, iphy); break; case PHY_FUNC_GET_EVENTS: { diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index 67699c8e321..a5e1a9e577b 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -103,7 +103,6 @@ struct isci_phy { struct scu_transport_layer_registers __iomem *transport_layer_registers; struct scu_link_layer_registers __iomem *link_layer_registers; struct asd_sas_phy sas_phy; - struct isci_port *isci_port; u8 sas_addr[SAS_ADDR_SIZE]; union { struct sas_identify_frame iaf; diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 7c6ac58a5c4..a28c9e6e280 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -60,6 +60,21 @@ #define SCIC_SDS_PORT_HARD_RESET_TIMEOUT (1000) #define SCU_DUMMY_INDEX (0xFFFF) +static struct device *sciport_to_dev(struct isci_port *iport) +{ + int i = iport->physical_port_index; + struct isci_port *table; + struct isci_host *ihost; + + if (i == SCIC_SDS_DUMMY_PORT) + i = SCI_MAX_PORTS+1; + + table = iport - i; + ihost = container_of(table, typeof(*ihost), ports[0]); + + return &ihost->pdev->dev; +} + static void isci_port_change_state(struct isci_port *iport, enum isci_status status) { unsigned long flags; @@ -165,17 +180,13 @@ static void isci_port_link_up(struct isci_host *isci_host, struct sci_port_properties properties; unsigned long success = true; - BUG_ON(iphy->isci_port != NULL); - - iphy->isci_port = iport; - dev_dbg(&isci_host->pdev->dev, "%s: isci_port = %p\n", __func__, iport); spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags); - isci_port_change_state(iphy->isci_port, isci_starting); + isci_port_change_state(iport, isci_starting); sci_port_get_properties(iport, &properties); @@ -269,8 +280,6 @@ static void isci_port_link_down(struct isci_host *isci_host, isci_host->sas_ha.notify_phy_event(&isci_phy->sas_phy, PHYE_LOSS_OF_SIGNAL); - isci_phy->isci_port = NULL; - dev_dbg(&isci_host->pdev->dev, "%s: isci_port = %p - Done\n", __func__, isci_port); } @@ -288,7 +297,6 @@ static void isci_port_ready(struct isci_host *isci_host, struct isci_port *isci_ dev_dbg(&isci_host->pdev->dev, "%s: isci_port = %p\n", __func__, isci_port); - complete_all(&isci_port->start_complete); isci_port_change_state(isci_port, isci_ready); return; } @@ -1645,7 +1653,6 @@ void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index) INIT_LIST_HEAD(&iport->remote_dev_list); INIT_LIST_HEAD(&iport->domain_dev_list); spin_lock_init(&iport->state_lock); - init_completion(&iport->start_complete); iport->isci_host = ihost; isci_port_change_state(iport, isci_freed); } @@ -1726,24 +1733,55 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor return ret; } -/** - * isci_port_deformed() - This function is called by libsas when a port becomes - * inactive. - * @phy: This parameter specifies the libsas phy with the inactive port. - * - */ void isci_port_deformed(struct asd_sas_phy *phy) { - pr_debug("%s: sas_phy = %p\n", __func__, phy); + struct isci_host *ihost = phy->ha->lldd_ha; + struct isci_port *iport = phy->port->lldd_port; + unsigned long flags; + int i; + + /* we got a port notification on a port that was subsequently + * torn down and libsas is just now catching up + */ + if (!iport) + return; + + spin_lock_irqsave(&ihost->scic_lock, flags); + for (i = 0; i < SCI_MAX_PHYS; i++) { + if (iport->active_phy_mask & 1 << i) + break; + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (i >= SCI_MAX_PHYS) + dev_dbg(&ihost->pdev->dev, "%s: port: %ld\n", + __func__, (long) (iport - &ihost->ports[0])); } -/** - * isci_port_formed() - This function is called by libsas when a port becomes - * active. - * @phy: This parameter specifies the libsas phy with the active port. - * - */ void isci_port_formed(struct asd_sas_phy *phy) { - pr_debug("%s: sas_phy = %p, sas_port = %p\n", __func__, phy, phy->port); + struct isci_host *ihost = phy->ha->lldd_ha; + struct isci_phy *iphy = to_iphy(phy); + struct asd_sas_port *port = phy->port; + struct isci_port *iport; + unsigned long flags; + int i; + + /* initial ports are formed as the driver is still initializing, + * wait for that process to complete + */ + wait_for_start(ihost); + + spin_lock_irqsave(&ihost->scic_lock, flags); + for (i = 0; i < SCI_MAX_PORTS; i++) { + iport = &ihost->ports[i]; + if (iport->active_phy_mask & 1 << iphy->phy_index) + break; + } + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (i >= SCI_MAX_PORTS) + iport = NULL; + + port->lldd_port = iport; } diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 08116090eb7..6b42e84b695 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -97,11 +97,9 @@ enum isci_status { struct isci_port { enum isci_status status; struct isci_host *isci_host; - struct asd_sas_port sas_port; struct list_head remote_dev_list; spinlock_t state_lock; struct list_head domain_dev_list; - struct completion start_complete; struct completion hard_reset_complete; enum sci_status hard_reset_status; struct sci_base_state_machine sm; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index dd74b6ceeb8..cff684fc1ef 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1381,31 +1381,18 @@ void isci_remote_device_gone(struct domain_device *dev) * * status, zero indicates success. */ -int isci_remote_device_found(struct domain_device *domain_dev) +int isci_remote_device_found(struct domain_device *dev) { - struct isci_host *isci_host = dev_to_ihost(domain_dev); - struct isci_port *isci_port; - struct isci_phy *isci_phy; - struct asd_sas_port *sas_port; - struct asd_sas_phy *sas_phy; + struct isci_host *isci_host = dev_to_ihost(dev); + struct isci_port *isci_port = dev->port->lldd_port; struct isci_remote_device *isci_device; enum sci_status status; dev_dbg(&isci_host->pdev->dev, - "%s: domain_device = %p\n", __func__, domain_dev); + "%s: domain_device = %p\n", __func__, dev); - wait_for_start(isci_host); - - sas_port = domain_dev->port; - sas_phy = list_first_entry(&sas_port->phy_list, struct asd_sas_phy, - port_phy_el); - isci_phy = to_iphy(sas_phy); - isci_port = isci_phy->isci_port; - - /* we are being called for a device on this port, - * so it has to come up eventually - */ - wait_for_completion(&isci_port->start_complete); + if (!isci_port) + return -ENODEV; if ((isci_stopping == isci_port_get_state(isci_port)) || (isci_stopped == isci_port_get_state(isci_port))) @@ -1419,7 +1406,7 @@ int isci_remote_device_found(struct domain_device *domain_dev) INIT_LIST_HEAD(&isci_device->node); spin_lock_irq(&isci_host->scic_lock); - isci_device->domain_dev = domain_dev; + isci_device->domain_dev = dev; isci_device->isci_port = isci_port; list_add_tail(&isci_device->node, &isci_port->remote_dev_list); @@ -1432,7 +1419,7 @@ int isci_remote_device_found(struct domain_device *domain_dev) if (status == SCI_SUCCESS) { /* device came up, advertise it to the world */ - domain_dev->lldd_dev = isci_device; + dev->lldd_dev = isci_device; } else isci_put_device(isci_device); spin_unlock_irq(&isci_host->scic_lock); -- cgit v1.2.3-70-g09d2 From fca4ecbdc440337b3c257b38c2f4cc8d0ca0286c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 3 Jan 2012 23:26:15 -0800 Subject: [SCSI] isci: kill isci_port->status It only tracks whether the port is stopping in order to gate new devices being discovered while the port is stopping. However, since the check and subsequent handling is unlocked there is nothing to stop the port from going down immediately after the check. Driver is already prepared to handle devices arriving on stale ports, and those will be cleaned up by an eventual ->lldd_dev_gone() notification. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/port.c | 89 +++++---------------------------------- drivers/scsi/isci/port.h | 5 --- drivers/scsi/isci/remote_device.c | 4 -- 3 files changed, 11 insertions(+), 87 deletions(-) diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index a28c9e6e280..f9d20c1e63c 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -75,20 +75,6 @@ static struct device *sciport_to_dev(struct isci_port *iport) return &ihost->pdev->dev; } -static void isci_port_change_state(struct isci_port *iport, enum isci_status status) -{ - unsigned long flags; - - dev_dbg(&iport->isci_host->pdev->dev, - "%s: iport = %p, state = 0x%x\n", - __func__, iport, status); - - /* XXX pointless lock */ - spin_lock_irqsave(&iport->state_lock, flags); - iport->status = status; - spin_unlock_irqrestore(&iport->state_lock, flags); -} - static void sci_port_get_protocols(struct isci_port *iport, struct sci_phy_proto *proto) { u8 index; @@ -186,8 +172,6 @@ static void isci_port_link_up(struct isci_host *isci_host, spin_lock_irqsave(&iphy->sas_phy.frame_rcvd_lock, flags); - isci_port_change_state(iport, isci_starting); - sci_port_get_properties(iport, &properties); if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) { @@ -269,7 +253,6 @@ static void isci_port_link_down(struct isci_host *isci_host, __func__, isci_device); set_bit(IDEV_GONE, &isci_device->flags); } - isci_port_change_state(isci_port, isci_stopping); } } @@ -284,45 +267,6 @@ static void isci_port_link_down(struct isci_host *isci_host, "%s: isci_port = %p - Done\n", __func__, isci_port); } - -/** - * isci_port_ready() - This function is called by the sci core when a link - * becomes ready. - * @isci_host: This parameter specifies the isci host object. - * @port: This parameter specifies the sci port with the active link. - * - */ -static void isci_port_ready(struct isci_host *isci_host, struct isci_port *isci_port) -{ - dev_dbg(&isci_host->pdev->dev, - "%s: isci_port = %p\n", __func__, isci_port); - - isci_port_change_state(isci_port, isci_ready); - return; -} - -/** - * isci_port_not_ready() - This function is called by the sci core when a link - * is not ready. All remote devices on this link will be removed if they are - * in the stopping state. - * @isci_host: This parameter specifies the isci host object. - * @port: This parameter specifies the sci port with the active link. - * - */ -static void isci_port_not_ready(struct isci_host *isci_host, struct isci_port *isci_port) -{ - dev_dbg(&isci_host->pdev->dev, - "%s: isci_port = %p\n", __func__, isci_port); -} - -static void isci_port_stop_complete(struct isci_host *ihost, - struct isci_port *iport, - enum sci_status completion_status) -{ - dev_dbg(&ihost->pdev->dev, "Port stop complete\n"); -} - - static bool is_port_ready_state(enum sci_port_states state) { switch (state) { @@ -843,10 +787,9 @@ static void port_timeout(unsigned long data) __func__, iport); } else if (current_state == SCI_PORT_STOPPING) { - /* if the port is still stopping then the stop has not completed */ - isci_port_stop_complete(iport->owning_controller, - iport, - SCI_FAILURE_TIMEOUT); + dev_dbg(sciport_to_dev(iport), + "%s: port%d: stop complete timeout\n", + __func__, iport->physical_port_index); } else { /* The port is in the ready state and we have a timer * reporting a timeout this should not happen. @@ -1011,7 +954,8 @@ static void sci_port_ready_substate_operational_enter(struct sci_base_state_mach struct isci_port *iport = container_of(sm, typeof(*iport), sm); struct isci_host *ihost = iport->owning_controller; - isci_port_ready(ihost, iport); + dev_dbg(&ihost->pdev->dev, "%s: port%d ready\n", + __func__, iport->physical_port_index); for (index = 0; index < SCI_MAX_PHYS; index++) { if (iport->phy_table[index]) { @@ -1077,7 +1021,8 @@ static void sci_port_ready_substate_operational_exit(struct sci_base_state_machi */ sci_port_abort_dummy_request(iport); - isci_port_not_ready(ihost, iport); + dev_dbg(&ihost->pdev->dev, "%s: port%d !ready\n", + __func__, iport->physical_port_index); if (iport->ready_exit) sci_port_invalidate_dummy_remote_node(iport); @@ -1089,7 +1034,8 @@ static void sci_port_ready_substate_configuring_enter(struct sci_base_state_mach struct isci_host *ihost = iport->owning_controller; if (iport->active_phy_mask == 0) { - isci_port_not_ready(ihost, iport); + dev_dbg(&ihost->pdev->dev, "%s: port%d !ready\n", + __func__, iport->physical_port_index); port_state_machine_change(iport, SCI_PORT_SUB_WAITING); } else @@ -1555,7 +1501,8 @@ static void sci_port_ready_state_enter(struct sci_base_state_machine *sm) if (prev_state == SCI_PORT_RESETTING) isci_port_hard_reset_complete(iport, SCI_SUCCESS); else - isci_port_not_ready(ihost, iport); + dev_dbg(&ihost->pdev->dev, "%s: port%d !ready\n", + __func__, iport->physical_port_index); /* Post and suspend the dummy remote node context for this port. */ sci_port_post_dummy_remote_node(iport); @@ -1652,21 +1599,7 @@ void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index) { INIT_LIST_HEAD(&iport->remote_dev_list); INIT_LIST_HEAD(&iport->domain_dev_list); - spin_lock_init(&iport->state_lock); iport->isci_host = ihost; - isci_port_change_state(iport, isci_freed); -} - -/** - * isci_port_get_state() - This function gets the status of the port object. - * @isci_port: This parameter points to the isci_port object - * - * status of the object as a isci_status enum. - */ -enum isci_status isci_port_get_state( - struct isci_port *isci_port) -{ - return isci_port->status; } void sci_port_broadcast_change_received(struct isci_port *iport, struct isci_phy *iphy) diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 6b42e84b695..265972939e3 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -95,10 +95,8 @@ enum isci_status { * @timer: timeout start/stop operations */ struct isci_port { - enum isci_status status; struct isci_host *isci_host; struct list_head remote_dev_list; - spinlock_t state_lock; struct list_head domain_dev_list; struct completion hard_reset_complete; enum sci_status hard_reset_status; @@ -294,9 +292,6 @@ void sci_port_get_attached_sas_address( struct isci_port *iport, struct sci_sas_address *sas_address); -enum isci_status isci_port_get_state( - struct isci_port *isci_port); - void isci_port_formed(struct asd_sas_phy *); void isci_port_deformed(struct asd_sas_phy *); diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index cff684fc1ef..108238d4510 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1394,10 +1394,6 @@ int isci_remote_device_found(struct domain_device *dev) if (!isci_port) return -ENODEV; - if ((isci_stopping == isci_port_get_state(isci_port)) || - (isci_stopped == isci_port_get_state(isci_port))) - return -ENODEV; - isci_device = isci_remote_device_alloc(isci_host, isci_port); if (!isci_device) return -ENODEV; -- cgit v1.2.3-70-g09d2 From 9277699121b81891e303ada0a53fa1d04b7ffe72 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 30 Nov 2011 11:57:34 -0800 Subject: [SCSI] isci: fix interpretation of "hard" reset A hard reset to isci in the direct-attached case is one where the driver internally manages debouncing the link. In the sas-expander-attached case a hard reset is one that clears affiliations. The driver should not be prematurely dropping affiliations at run time, that decision (to force expander hard resets to ata devices) is left to userspace to manage. So, arrange for I_T_nexus resets to be sas-link-resets in the expander-attached case and isci-hard-resets in the direct-attached case. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/port.c | 31 ++++++++++++++++++++----------- drivers/scsi/isci/port.h | 3 ++- drivers/scsi/isci/task.c | 24 +++++++++++++++--------- 3 files changed, 37 insertions(+), 21 deletions(-) diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index f9d20c1e63c..e55ef65f521 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -305,7 +305,9 @@ static void port_state_machine_change(struct isci_port *iport, static void isci_port_hard_reset_complete(struct isci_port *isci_port, enum sci_status completion_status) { - dev_dbg(&isci_port->isci_host->pdev->dev, + struct isci_host *ihost = isci_port->owning_controller; + + dev_dbg(&ihost->pdev->dev, "%s: isci_port = %p, completion_status=%x\n", __func__, isci_port, completion_status); @@ -316,23 +318,24 @@ static void isci_port_hard_reset_complete(struct isci_port *isci_port, /* The reset failed. The port state is now SCI_PORT_FAILED. */ if (isci_port->active_phy_mask == 0) { + int phy_idx = isci_port->last_active_phy; + struct isci_phy *iphy = &ihost->phys[phy_idx]; /* Generate the link down now to the host, since it * was intercepted by the hard reset state machine when * it really happened. */ - isci_port_link_down(isci_port->isci_host, - &isci_port->isci_host->phys[ - isci_port->last_active_phy], - isci_port); + isci_port_link_down(ihost, iphy, isci_port); } /* Advance the port state so that link state changes will be - * noticed. - */ + * noticed. + */ port_state_machine_change(isci_port, SCI_PORT_SUB_WAITING); } - complete_all(&isci_port->hard_reset_complete); + clear_bit(IPORT_RESET_PENDING, &isci_port->state); + wake_up(&ihost->eventq); + } /* This method will return a true value if the specified phy can be assigned to @@ -1610,6 +1613,11 @@ void sci_port_broadcast_change_received(struct isci_port *iport, struct isci_phy isci_port_bc_change_received(ihost, iport, iphy); } +static void wait_port_reset(struct isci_host *ihost, struct isci_port *iport) +{ + wait_event(ihost->eventq, !test_bit(IPORT_RESET_PENDING, &iport->state)); +} + int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport, struct isci_phy *iphy) { @@ -1620,9 +1628,8 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n", __func__, iport); - init_completion(&iport->hard_reset_complete); - spin_lock_irqsave(&ihost->scic_lock, flags); + set_bit(IPORT_RESET_PENDING, &iport->state); #define ISCI_PORT_RESET_TIMEOUT SCIC_SDS_SIGNATURE_FIS_TIMEOUT status = sci_port_hard_reset(iport, ISCI_PORT_RESET_TIMEOUT); @@ -1630,7 +1637,7 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor spin_unlock_irqrestore(&ihost->scic_lock, flags); if (status == SCI_SUCCESS) { - wait_for_completion(&iport->hard_reset_complete); + wait_port_reset(ihost, iport); dev_dbg(&ihost->pdev->dev, "%s: iport = %p; hard reset completion\n", @@ -1644,6 +1651,8 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor __func__, iport, iport->hard_reset_status); } } else { + clear_bit(IPORT_RESET_PENDING, &iport->state); + wake_up(&ihost->eventq); ret = TMF_RESP_FUNC_FAILED; dev_err(&ihost->pdev->dev, diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 265972939e3..a0dcdaeac3b 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -98,7 +98,8 @@ struct isci_port { struct isci_host *isci_host; struct list_head remote_dev_list; struct list_head domain_dev_list; - struct completion hard_reset_complete; + #define IPORT_RESET_PENDING 0 + unsigned long state; enum sci_status hard_reset_status; struct sci_base_state_machine sm; bool ready_exit; diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index b96e6044eda..c4d324ccee1 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -1330,29 +1330,35 @@ isci_task_request_complete(struct isci_host *ihost, } static int isci_reset_device(struct isci_host *ihost, + struct domain_device *dev, struct isci_remote_device *idev) { - struct sas_phy *phy = sas_get_local_phy(idev->domain_dev); - enum sci_status status; - unsigned long flags; int rc; + unsigned long flags; + enum sci_status status; + struct sas_phy *phy = sas_get_local_phy(dev); + struct isci_port *iport = dev->port->lldd_port; dev_dbg(&ihost->pdev->dev, "%s: idev %p\n", __func__, idev); spin_lock_irqsave(&ihost->scic_lock, flags); status = sci_remote_device_reset(idev); - if (status != SCI_SUCCESS) { - spin_unlock_irqrestore(&ihost->scic_lock, flags); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + if (status != SCI_SUCCESS) { dev_dbg(&ihost->pdev->dev, "%s: sci_remote_device_reset(%p) returned %d!\n", __func__, idev, status); rc = TMF_RESP_FUNC_FAILED; goto out; } - spin_unlock_irqrestore(&ihost->scic_lock, flags); - rc = sas_phy_reset(phy, true); + if (scsi_is_sas_phy_local(phy)) { + struct isci_phy *iphy = &ihost->phys[phy->number]; + + rc = isci_port_perform_hard_reset(ihost, iport, iphy); + } else + rc = sas_phy_reset(phy, !dev_is_sata(dev)); /* Terminate in-progress I/O now. */ isci_remote_device_nuke_requests(ihost, idev); @@ -1390,7 +1396,7 @@ int isci_task_I_T_nexus_reset(struct domain_device *dev) goto out; } - ret = isci_reset_device(ihost, idev); + ret = isci_reset_device(ihost, dev, idev); out: isci_put_device(idev); return ret; @@ -1413,7 +1419,7 @@ int isci_bus_reset_handler(struct scsi_cmnd *cmd) goto out; } - ret = isci_reset_device(ihost, idev); + ret = isci_reset_device(ihost, dev, idev); out: isci_put_device(idev); return ret; -- cgit v1.2.3-70-g09d2 From 43a5ab151f0268459c4368292c2ddb2266b8f243 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 8 Dec 2011 23:20:44 -0800 Subject: [SCSI] isci: stop interpreting ->lldd_lu_reset() as an ata soft-reset Driving resets from libsas-eh is pre-mature as libata will make a decision about performing a softreset. Currently libata determines whether to perform a softreset based on ata_eh_followup_srst_needed(), and none of those conditions apply to isci. Remove the srst implementation and translate ->lldd_lu_reset() for ata devices as a request to drive a reset via libata-eh. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/request.c | 195 ++---------------------------------------- drivers/scsi/isci/request.h | 9 +- drivers/scsi/isci/task.c | 93 ++------------------ drivers/scsi/isci/task.h | 2 - drivers/scsi/libsas/sas_ata.c | 2 + 5 files changed, 15 insertions(+), 286 deletions(-) diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 788daeedc89..1a39ce50529 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -666,18 +666,12 @@ sci_io_request_construct_sata(struct isci_request *ireq, if (test_bit(IREQ_TMF, &ireq->flags)) { struct isci_tmf *tmf = isci_request_access_tmf(ireq); - if (tmf->tmf_code == isci_tmf_sata_srst_high || - tmf->tmf_code == isci_tmf_sata_srst_low) { - scu_stp_raw_request_construct_task_context(ireq); - return SCI_SUCCESS; - } else { - dev_err(&ireq->owning_controller->pdev->dev, - "%s: Request 0x%p received un-handled SAT " - "management protocol 0x%x.\n", - __func__, ireq, tmf->tmf_code); + dev_err(&ireq->owning_controller->pdev->dev, + "%s: Request 0x%p received un-handled SAT " + "management protocol 0x%x.\n", + __func__, ireq, tmf->tmf_code); - return SCI_FAILURE; - } + return SCI_FAILURE; } if (!sas_protocol_ata(task->task_proto)) { @@ -774,34 +768,6 @@ static enum sci_status sci_io_request_construct_basic_sata(struct isci_request * return status; } -enum sci_status sci_task_request_construct_sata(struct isci_request *ireq) -{ - enum sci_status status = SCI_SUCCESS; - - /* check for management protocols */ - if (test_bit(IREQ_TMF, &ireq->flags)) { - struct isci_tmf *tmf = isci_request_access_tmf(ireq); - - if (tmf->tmf_code == isci_tmf_sata_srst_high || - tmf->tmf_code == isci_tmf_sata_srst_low) { - scu_stp_raw_request_construct_task_context(ireq); - } else { - dev_err(&ireq->owning_controller->pdev->dev, - "%s: Request 0x%p received un-handled SAT " - "Protocol 0x%x.\n", - __func__, ireq, tmf->tmf_code); - - return SCI_FAILURE; - } - } - - if (status != SCI_SUCCESS) - return status; - sci_change_state(&ireq->sm, SCI_REQ_CONSTRUCTED); - - return status; -} - /** * sci_req_tx_bytes - bytes transferred when reply underruns request * @ireq: request that was terminated early @@ -903,9 +869,6 @@ sci_io_request_terminate(struct isci_request *ireq) case SCI_REQ_STP_PIO_WAIT_FRAME: case SCI_REQ_STP_PIO_DATA_IN: case SCI_REQ_STP_PIO_DATA_OUT: - case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED: - case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG: - case SCI_REQ_STP_SOFT_RESET_WAIT_D2H: case SCI_REQ_ATAPI_WAIT_H2D: case SCI_REQ_ATAPI_WAIT_PIO_SETUP: case SCI_REQ_ATAPI_WAIT_D2H: @@ -2085,59 +2048,6 @@ sci_io_request_frame_handler(struct isci_request *ireq, return status; } - case SCI_REQ_STP_SOFT_RESET_WAIT_D2H: { - struct dev_to_host_fis *frame_header; - u32 *frame_buffer; - - status = sci_unsolicited_frame_control_get_header(&ihost->uf_control, - frame_index, - (void **)&frame_header); - if (status != SCI_SUCCESS) { - dev_err(&ihost->pdev->dev, - "%s: SCIC IO Request 0x%p could not get frame " - "header for frame index %d, status %x\n", - __func__, - stp_req, - frame_index, - status); - return status; - } - - switch (frame_header->fis_type) { - case FIS_REGD2H: - sci_unsolicited_frame_control_get_buffer(&ihost->uf_control, - frame_index, - (void **)&frame_buffer); - - sci_controller_copy_sata_response(&ireq->stp.rsp, - frame_header, - frame_buffer); - - /* The command has completed with error */ - ireq->scu_status = SCU_TASK_DONE_CHECK_RESPONSE; - ireq->sci_status = SCI_FAILURE_IO_RESPONSE_VALID; - break; - - default: - dev_warn(&ihost->pdev->dev, - "%s: IO Request:0x%p Frame Id:%d protocol " - "violation occurred\n", - __func__, - stp_req, - frame_index); - - ireq->scu_status = SCU_TASK_DONE_UNEXP_FIS; - ireq->sci_status = SCI_FAILURE_PROTOCOL_VIOLATION; - break; - } - - sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); - - /* Frame has been decoded return it to the controller */ - sci_controller_release_frame(ihost, frame_index); - - return status; - } case SCI_REQ_ATAPI_WAIT_PIO_SETUP: { struct sas_task *task = isci_request_access_task(ireq); @@ -2235,57 +2145,6 @@ static enum sci_status stp_request_udma_await_tc_event(struct isci_request *ireq return status; } -static enum sci_status -stp_request_soft_reset_await_h2d_asserted_tc_event(struct isci_request *ireq, - u32 completion_code) -{ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - ireq->scu_status = SCU_TASK_DONE_GOOD; - ireq->sci_status = SCI_SUCCESS; - sci_change_state(&ireq->sm, SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG); - break; - - default: - /* - * All other completion status cause the IO to be complete. - * If a NAK was received, then it is up to the user to retry - * the request. - */ - ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); - ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; - sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); - break; - } - - return SCI_SUCCESS; -} - -static enum sci_status -stp_request_soft_reset_await_h2d_diagnostic_tc_event(struct isci_request *ireq, - u32 completion_code) -{ - switch (SCU_GET_COMPLETION_TL_STATUS(completion_code)) { - case SCU_MAKE_COMPLETION_STATUS(SCU_TASK_DONE_GOOD): - ireq->scu_status = SCU_TASK_DONE_GOOD; - ireq->sci_status = SCI_SUCCESS; - sci_change_state(&ireq->sm, SCI_REQ_STP_SOFT_RESET_WAIT_D2H); - break; - - default: - /* All other completion status cause the IO to be complete. If - * a NAK was received, then it is up to the user to retry the - * request. - */ - ireq->scu_status = SCU_NORMALIZE_COMPLETION_STATUS(completion_code); - ireq->sci_status = SCI_FAILURE_CONTROLLER_SPECIFIC_IO_ERR; - sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); - break; - } - - return SCI_SUCCESS; -} - static enum sci_status atapi_raw_completion(struct isci_request *ireq, u32 completion_code, enum sci_base_request_states next) { @@ -2431,14 +2290,6 @@ sci_io_request_tc_completion(struct isci_request *ireq, case SCI_REQ_STP_PIO_DATA_OUT: return pio_data_out_tx_done_tc_event(ireq, completion_code); - case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED: - return stp_request_soft_reset_await_h2d_asserted_tc_event(ireq, - completion_code); - - case SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG: - return stp_request_soft_reset_await_h2d_diagnostic_tc_event(ireq, - completion_code); - case SCI_REQ_ABORTING: return request_aborting_state_tc_event(ireq, completion_code); @@ -3212,10 +3063,6 @@ static void sci_request_started_state_enter(struct sci_base_state_machine *sm) */ if (!task && dev->dev_type == SAS_END_DEV) { state = SCI_REQ_TASK_WAIT_TC_COMP; - } else if (!task && - (isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_high || - isci_request_access_tmf(ireq)->tmf_code == isci_tmf_sata_srst_low)) { - state = SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED; } else if (task && task->task_proto == SAS_PROTOCOL_SMP) { state = SCI_REQ_SMP_WAIT_RESP; } else if (task && sas_protocol_ata(task->task_proto) && @@ -3272,31 +3119,6 @@ static void sci_stp_request_started_pio_await_h2d_completion_enter(struct sci_ba ireq->target_device->working_request = ireq; } -static void sci_stp_request_started_soft_reset_await_h2d_asserted_completion_enter(struct sci_base_state_machine *sm) -{ - struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); - - ireq->target_device->working_request = ireq; -} - -static void sci_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter(struct sci_base_state_machine *sm) -{ - struct isci_request *ireq = container_of(sm, typeof(*ireq), sm); - struct scu_task_context *tc = ireq->tc; - struct host_to_dev_fis *h2d_fis; - enum sci_status status; - - /* Clear the SRST bit */ - h2d_fis = &ireq->stp.cmd; - h2d_fis->control = 0; - - /* Clear the TC control bit */ - tc->control_frame = 0; - - status = sci_controller_continue_io(ireq); - WARN_ONCE(status != SCI_SUCCESS, "isci: continue io failure\n"); -} - static const struct sci_base_state sci_request_state_table[] = { [SCI_REQ_INIT] = { }, [SCI_REQ_CONSTRUCTED] = { }, @@ -3315,13 +3137,6 @@ static const struct sci_base_state sci_request_state_table[] = { [SCI_REQ_STP_PIO_DATA_OUT] = { }, [SCI_REQ_STP_UDMA_WAIT_TC_COMP] = { }, [SCI_REQ_STP_UDMA_WAIT_D2H] = { }, - [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED] = { - .enter_state = sci_stp_request_started_soft_reset_await_h2d_asserted_completion_enter, - }, - [SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG] = { - .enter_state = sci_stp_request_started_soft_reset_await_h2d_diagnostic_completion_enter, - }, - [SCI_REQ_STP_SOFT_RESET_WAIT_D2H] = { }, [SCI_REQ_TASK_WAIT_TC_COMP] = { }, [SCI_REQ_TASK_WAIT_TC_RESP] = { }, [SCI_REQ_SMP_WAIT_RESP] = { }, diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index be38933dd6d..bcf2f37f23e 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -211,10 +211,6 @@ enum sci_base_request_states { SCI_REQ_STP_NON_DATA_WAIT_H2D, SCI_REQ_STP_NON_DATA_WAIT_D2H, - SCI_REQ_STP_SOFT_RESET_WAIT_H2D_ASSERTED, - SCI_REQ_STP_SOFT_RESET_WAIT_H2D_DIAG, - SCI_REQ_STP_SOFT_RESET_WAIT_D2H, - /* * While in this state the IO request object is waiting for the TC * completion notification for the H2D Register FIS @@ -446,10 +442,7 @@ sci_task_request_construct(struct isci_host *ihost, struct isci_remote_device *idev, u16 io_tag, struct isci_request *ireq); -enum sci_status -sci_task_request_construct_ssp(struct isci_request *ireq); -enum sci_status -sci_task_request_construct_sata(struct isci_request *ireq); +enum sci_status sci_task_request_construct_ssp(struct isci_request *ireq); void sci_smp_request_copy_response(struct isci_request *ireq); static inline int isci_task_is_ncq_recovery(struct sas_task *task) diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index c4d324ccee1..3f04e97128a 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -247,46 +247,6 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) return 0; } -static enum sci_status isci_sata_management_task_request_build(struct isci_request *ireq) -{ - struct isci_tmf *isci_tmf; - enum sci_status status; - - if (!test_bit(IREQ_TMF, &ireq->flags)) - return SCI_FAILURE; - - isci_tmf = isci_request_access_tmf(ireq); - - switch (isci_tmf->tmf_code) { - - case isci_tmf_sata_srst_high: - case isci_tmf_sata_srst_low: { - struct host_to_dev_fis *fis = &ireq->stp.cmd; - - memset(fis, 0, sizeof(*fis)); - - fis->fis_type = 0x27; - fis->flags &= ~0x80; - fis->flags &= 0xF0; - if (isci_tmf->tmf_code == isci_tmf_sata_srst_high) - fis->control |= ATA_SRST; - else - fis->control &= ~ATA_SRST; - break; - } - /* other management commnd go here... */ - default: - return SCI_FAILURE; - } - - /* core builds the protocol specific request - * based on the h2d fis. - */ - status = sci_task_request_construct_sata(ireq); - - return status; -} - static struct isci_request *isci_task_request_build(struct isci_host *ihost, struct isci_remote_device *idev, u16 tag, struct isci_tmf *isci_tmf) @@ -326,13 +286,6 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, return NULL; } - if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) { - isci_tmf->proto = SAS_PROTOCOL_SATA; - status = isci_sata_management_task_request_build(ireq); - - if (status != SCI_SUCCESS) - return NULL; - } return ireq; } @@ -871,53 +824,20 @@ static int isci_task_send_lu_reset_sas( return ret; } -static int isci_task_send_lu_reset_sata(struct isci_host *ihost, - struct isci_remote_device *idev, u8 *lun) +int isci_task_lu_reset(struct domain_device *dev, u8 *lun) { - int ret = TMF_RESP_FUNC_FAILED; - struct isci_tmf tmf; - - /* Send the soft reset to the target */ - #define ISCI_SRST_TIMEOUT_MS 25000 /* 25 second timeout. */ - isci_task_build_tmf(&tmf, isci_tmf_sata_srst_high, NULL, NULL); - - ret = isci_task_execute_tmf(ihost, idev, &tmf, ISCI_SRST_TIMEOUT_MS); - - if (ret != TMF_RESP_FUNC_COMPLETE) { - dev_dbg(&ihost->pdev->dev, - "%s: Assert SRST failed (%p) = %x", - __func__, idev, ret); - - /* Return the failure so that the LUN reset is escalated - * to a target reset. - */ - } - return ret; -} - -/** - * isci_task_lu_reset() - This function is one of the SAS Domain Template - * functions. This is one of the Task Management functoins called by libsas, - * to reset the given lun. Note the assumption that while this call is - * executing, no I/O will be sent by the host to the device. - * @lun: This parameter specifies the lun to be reset. - * - * status, zero indicates success. - */ -int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun) -{ - struct isci_host *isci_host = dev_to_ihost(domain_device); + struct isci_host *isci_host = dev_to_ihost(dev); struct isci_remote_device *isci_device; unsigned long flags; int ret; spin_lock_irqsave(&isci_host->scic_lock, flags); - isci_device = isci_lookup_device(domain_device); + isci_device = isci_lookup_device(dev); spin_unlock_irqrestore(&isci_host->scic_lock, flags); dev_dbg(&isci_host->pdev->dev, "%s: domain_device=%p, isci_host=%p; isci_device=%p\n", - __func__, domain_device, isci_host, isci_device); + __func__, dev, isci_host, isci_device); if (!isci_device) { /* If the device is gone, stop the escalations. */ @@ -929,8 +849,9 @@ int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun) set_bit(IDEV_EH, &isci_device->flags); /* Send the task management part of the reset. */ - if (sas_protocol_ata(domain_device->tproto)) { - ret = isci_task_send_lu_reset_sata(isci_host, isci_device, lun); + if (dev_is_sata(dev)) { + sas_ata_schedule_reset(dev); + ret = TMF_RESP_FUNC_COMPLETE; } else ret = isci_task_send_lu_reset_sas(isci_host, isci_device, lun); diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index bb472c33952..5ba00c3081f 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -86,8 +86,6 @@ enum isci_tmf_function_codes { isci_tmf_func_none = 0, isci_tmf_ssp_task_abort = TMF_ABORT_TASK, isci_tmf_ssp_lun_reset = TMF_LU_RESET, - isci_tmf_sata_srst_high = TMF_LU_RESET + 0x100, /* Non SCSI */ - isci_tmf_sata_srst_low = TMF_LU_RESET + 0x101 /* Non SCSI */ }; /** * struct isci_tmf - This class represents the task management object which diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 0cb538f8478..37a9e73870d 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include "sas_internal.h" @@ -757,6 +758,7 @@ void sas_ata_schedule_reset(struct domain_device *dev) ata_port_schedule_eh(ap); spin_unlock_irqrestore(ap->lock, flags); } +EXPORT_SYMBOL_GPL(sas_ata_schedule_reset); void sas_ata_wait_eh(struct domain_device *dev) { -- cgit v1.2.3-70-g09d2 From 687833a03baae8308900486fa6499ef955fd07a9 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 17 Nov 2011 18:01:38 -0800 Subject: [SCSI] isci: ->lldd_ata_check_ready handler Report to libata whether the link to the given domain_device is up and the signature fis has been received. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/init.c | 3 +++ drivers/scsi/isci/port.c | 25 +++++++++++++++++++++++++ drivers/scsi/isci/port.h | 1 + 3 files changed, 29 insertions(+) diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index c20fda09042..68d9bc23d19 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -193,6 +193,9 @@ static struct sas_domain_function_template isci_transport_ops = { .lldd_lu_reset = isci_task_lu_reset, .lldd_query_task = isci_task_query_task, + /* ata recovery called from ata-eh */ + .lldd_ata_check_ready = isci_ata_check_ready, + /* Port and Adapter management */ .lldd_clear_nexus_port = isci_task_clear_nexus_port, .lldd_clear_nexus_ha = isci_task_clear_nexus_ha, diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index e55ef65f521..c5ae94dbef4 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -1675,6 +1675,31 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor return ret; } +int isci_ata_check_ready(struct domain_device *dev) +{ + struct isci_port *iport = dev->port->lldd_port; + struct isci_host *ihost = dev_to_ihost(dev); + struct isci_remote_device *idev; + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&ihost->scic_lock, flags); + idev = isci_lookup_device(dev); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + + if (!idev) + goto out; + + if (test_bit(IPORT_RESET_PENDING, &iport->state)) + goto out; + + rc = !!iport->active_phy_mask; + out: + isci_put_device(idev); + + return rc; +} + void isci_port_deformed(struct asd_sas_phy *phy) { struct isci_host *ihost = phy->ha->lldd_ha; diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index a0dcdaeac3b..321b987d582 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -303,4 +303,5 @@ void isci_port_init( int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport, struct isci_phy *iphy); +int isci_ata_check_ready(struct domain_device *dev); #endif /* !defined(_ISCI_PORT_H_) */ -- cgit v1.2.3-70-g09d2 From 6a719391e4a13d5fa2ec7642ef0c780d7f3f5716 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 8 Dec 2011 00:37:25 -0800 Subject: [SCSI] isci: remove bus and reset handlers Remove ->eh_device_reset_handler() and ->eh_bus_reset_handler() for the same reason they are not implemented for libata hosts, they cannot be implemented reliably with ata-eh. ATA error recovery wants to divert all resets to the eh thread and wait for completion, these handlers may be invoked from a non-blocking ioctl. The other path they are called from is libsas-eh, and if we escalate past I_T_nexus reset we have larger problems i.e. tear down all in-flight commands in the domain potentially without notification to the lldd if it has chosen not to implement ->lldd_clear_nexus_port() / ->lldd_clear_nexus_ha(). Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/init.c | 2 -- drivers/scsi/isci/task.c | 23 ----------------------- drivers/scsi/isci/task.h | 2 -- 3 files changed, 27 deletions(-) diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 68d9bc23d19..c3fe39bcacd 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -165,8 +165,6 @@ static struct scsi_host_template isci_sht = { .sg_tablesize = SG_ALL, .max_sectors = SCSI_DEFAULT_MAX_SECTORS, .use_clustering = ENABLE_CLUSTERING, - .eh_device_reset_handler = sas_eh_device_reset_handler, - .eh_bus_reset_handler = isci_bus_reset_handler, .slave_alloc = sas_slave_alloc, .target_destroy = sas_target_destroy, .ioctl = sas_ioctl, diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 3f04e97128a..53069795748 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -1322,26 +1322,3 @@ int isci_task_I_T_nexus_reset(struct domain_device *dev) isci_put_device(idev); return ret; } - -int isci_bus_reset_handler(struct scsi_cmnd *cmd) -{ - struct domain_device *dev = sdev_to_domain_dev(cmd->device); - struct isci_host *ihost = dev_to_ihost(dev); - struct isci_remote_device *idev; - unsigned long flags; - int ret; - - spin_lock_irqsave(&ihost->scic_lock, flags); - idev = isci_lookup_device(dev); - spin_unlock_irqrestore(&ihost->scic_lock, flags); - - if (!idev) { - ret = TMF_RESP_FUNC_COMPLETE; - goto out; - } - - ret = isci_reset_device(ihost, dev, idev); - out: - isci_put_device(idev); - return ret; -} diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index 5ba00c3081f..7b6d0e32fd9 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -208,8 +208,6 @@ int isci_queuecommand( struct scsi_cmnd *scsi_cmd, void (*donefunc)(struct scsi_cmnd *)); -int isci_bus_reset_handler(struct scsi_cmnd *cmd); - /** * enum isci_completion_selection - This enum defines the possible actions to * take with respect to a given request's notification back to libsas. -- cgit v1.2.3-70-g09d2 From 5a998328296cb16cb8b0307a402a0f2feab533c5 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 12 Dec 2011 20:32:09 -0800 Subject: [SCSI] isci: remove IDEV_EH hack to disable "discovery-time" ata resets Prior to commit 61aaff49 "isci: filter broadcast change notifications during SMP phy resets" we borrowed the MVS_DEV_EH approach from the mvsas driver for preventing ->lldd_I_T_nexus_reset() events during ata discovery. This hack was protecting against the old ->phy_reset() in ata_bus_probe(), but since the conversion to the new error handling this hack is preventing resets from reaching ata devices. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/remote_device.c | 1 - drivers/scsi/isci/remote_device.h | 7 +++---- drivers/scsi/isci/task.c | 9 ++++----- 3 files changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 108238d4510..934d21ea14e 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1308,7 +1308,6 @@ void isci_remote_device_release(struct kref *kref) clear_bit(IDEV_STOP_PENDING, &idev->flags); clear_bit(IDEV_IO_READY, &idev->flags); clear_bit(IDEV_GONE, &idev->flags); - clear_bit(IDEV_EH, &idev->flags); smp_mb__before_clear_bit(); clear_bit(IDEV_ALLOCATED, &idev->flags); wake_up(&ihost->eventq); diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 483ee50152f..98c2801ed08 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -82,10 +82,9 @@ struct isci_remote_device { #define IDEV_START_PENDING 0 #define IDEV_STOP_PENDING 1 #define IDEV_ALLOCATED 2 - #define IDEV_EH 3 - #define IDEV_GONE 4 - #define IDEV_IO_READY 5 - #define IDEV_IO_NCQERROR 6 + #define IDEV_GONE 3 + #define IDEV_IO_READY 4 + #define IDEV_IO_NCQERROR 5 unsigned long flags; struct kref kref; struct isci_port *isci_port; diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 53069795748..374254ede9d 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -846,7 +846,6 @@ int isci_task_lu_reset(struct domain_device *dev, u8 *lun) ret = TMF_RESP_FUNC_COMPLETE; goto out; } - set_bit(IDEV_EH, &isci_device->flags); /* Send the task management part of the reset. */ if (dev_is_sata(dev)) { @@ -981,9 +980,6 @@ int isci_task_abort_task(struct sas_task *task) "%s: dev = %p, task = %p, old_request == %p\n", __func__, isci_device, task, old_request); - if (isci_device) - set_bit(IDEV_EH, &isci_device->flags); - /* Device reset conditions signalled in task_state_flags are the * responsbility of libsas to observe at the start of the error * handler thread. @@ -1312,7 +1308,10 @@ int isci_task_I_T_nexus_reset(struct domain_device *dev) idev = isci_lookup_device(dev); spin_unlock_irqrestore(&ihost->scic_lock, flags); - if (!idev || !test_bit(IDEV_EH, &idev->flags)) { + if (!idev) { + /* XXX: need to cleanup any ireqs targeting this + * domain_device + */ ret = TMF_RESP_FUNC_COMPLETE; goto out; } -- cgit v1.2.3-70-g09d2 From 45c73b65194173e77030d5b95abe5b63a402d268 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 9 Jan 2012 10:12:52 -0800 Subject: [SCSI] libsas: pre-clean commands that won the eh vs completion race When scrolling forward through the eh list (in a clear_q scenario) it is possible to encounter commands that won the completion vs eh race. Rather than sprinkle more "if (!task)" throughout the handler just make a pass through the list and delete the race winners before handling the rest. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_scsi_host.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 94ef76316c3..731c8925063 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -249,8 +249,8 @@ out_done: static void sas_eh_finish_cmd(struct scsi_cmnd *cmd) { - struct sas_task *task = TO_SAS_TASK(cmd); struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(cmd->device->host); + struct sas_task *task = TO_SAS_TASK(cmd); /* At this point, we only get called following an actual abort * of the task, so we should be guaranteed not to be racing with @@ -267,9 +267,9 @@ static void sas_eh_finish_cmd(struct scsi_cmnd *cmd) static void sas_eh_defer_cmd(struct scsi_cmnd *cmd) { - struct sas_task *task = TO_SAS_TASK(cmd); - struct domain_device *dev = task->dev; + struct domain_device *dev = cmd_to_domain_dev(cmd); struct sas_ha_struct *ha = dev->port->ha; + struct sas_task *task = TO_SAS_TASK(cmd); if (!dev_is_sata(dev)) { sas_eh_finish_cmd(cmd); @@ -530,8 +530,9 @@ static int sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct sas_internal *i = to_sas_internal(shost->transportt); unsigned long flags; struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); + LIST_HEAD(done); -Again: + /* clean out any commands that won the completion vs eh race */ list_for_each_entry_safe(cmd, n, work_q, eh_entry) { struct domain_device *dev = cmd_to_domain_dev(cmd); struct sas_task *task; @@ -545,7 +546,12 @@ Again: spin_unlock_irqrestore(&dev->done_lock, flags); if (!task) - continue; + list_move_tail(&cmd->eh_entry, &done); + } + + Again: + list_for_each_entry_safe(cmd, n, work_q, eh_entry) { + struct sas_task *task = TO_SAS_TASK(cmd); list_del_init(&cmd->eh_entry); @@ -649,15 +655,16 @@ Again: goto clear_q; } } + out: + list_splice_tail(&done, work_q); list_splice_tail_init(&ha->eh_ata_q, work_q); return list_empty(work_q); -clear_q: + + clear_q: SAS_DPRINTK("--- Exit %s -- clear_q\n", __func__); list_for_each_entry_safe(cmd, n, work_q, eh_entry) sas_eh_finish_cmd(cmd); - - list_splice_tail_init(&ha->eh_ata_q, work_q); - return list_empty(work_q); + goto out; } void sas_scsi_recover_host(struct Scsi_Host *shost) -- cgit v1.2.3-70-g09d2 From 7d05919aad080074453de880822fe5805875645f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 10 Jan 2012 14:39:13 -0800 Subject: [SCSI] libsas: mark all domain devices gone if root port disappears If the top level expander is hot removed, mark all child devices as gone before unregistration to short circuit futile recovery. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_discover.c | 8 ++++++-- drivers/scsi/libsas/sas_port.c | 4 +--- include/scsi/libsas.h | 2 +- 3 files changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 789b50861bb..b91866a8233 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -299,12 +299,16 @@ void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *dev) } } -void sas_unregister_domain_devices(struct asd_sas_port *port) +void sas_unregister_domain_devices(struct asd_sas_port *port, int gone) { struct domain_device *dev, *n; - list_for_each_entry_safe_reverse(dev, n, &port->dev_list, dev_list_node) + list_for_each_entry_safe_reverse(dev, n, &port->dev_list, dev_list_node) { + if (gone) + set_bit(SAS_DEV_GONE, &dev->state); sas_unregister_dev(port, dev); + } + list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) sas_unregister_dev(port, dev); diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index 31adcd1b419..59ee8a0a6ea 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -167,9 +167,7 @@ void sas_deform_port(struct asd_sas_phy *phy, int gone) dev->pathways--; if (port->num_phys == 1) { - if (dev && gone) - set_bit(SAS_DEV_GONE, &dev->state); - sas_unregister_domain_devices(port); + sas_unregister_domain_devices(port, gone); sas_port_delete(port->port); port->port = NULL; } else { diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 55bab863380..4a42be34fad 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -664,7 +664,7 @@ void sas_init_ex_attr(void); int sas_ex_revalidate_domain(struct domain_device *); -void sas_unregister_domain_devices(struct asd_sas_port *port); +void sas_unregister_domain_devices(struct asd_sas_port *port, int gone); void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *); int sas_discover_event(struct asd_sas_port *, enum discover_event ev); -- cgit v1.2.3-70-g09d2 From 8abda4d28a55ecb91e39ceb5e3ee264c5a3cd1af Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 10 Jan 2012 15:14:09 -0800 Subject: [SCSI] libsas: close scsi_remove_target() vs libata-eh race ata_port lifetime in libata follows the host. In libsas it follows the scsi_target. Once scsi_remove_device() has caused all commands to be completed it allows scsi_remove_target() to immediately proceed to freeing the ata_port causing bug reports like: [ 848.393333] BUG: spinlock bad magic on CPU#4, kworker/u:2/5107 [ 848.400262] general protection fault: 0000 [#1] SMP [ 848.406244] CPU 4 [ 848.408310] Modules linked in: nls_utf8 ipv6 uinput i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support ioatdma dca sg sd_mod sr_mod cdrom ahci libahci isci libsas libata scsi_transport_sas [last unloaded: scsi_wait_scan] [ 848.432060] [ 848.434137] Pid: 5107, comm: kworker/u:2 Not tainted 3.2.0-isci+ #8 Intel Corporation S2600CP/S2600CP [ 848.445310] RIP: 0010:[] [] spin_dump+0x5e/0x8c [ 848.454787] RSP: 0018:ffff8807f868dca0 EFLAGS: 00010002 [ 848.461137] RAX: 0000000000000048 RBX: ffff8807fe86a630 RCX: ffffffff817d0be0 [ 848.469520] RDX: 0000000000000000 RSI: ffffffff814af1cf RDI: 0000000000000002 [ 848.477959] RBP: ffff8807f868dcb0 R08: 00000000ffffffff R09: 000000006b6b6b6b [ 848.486327] R10: 000000000003fb8c R11: ffffffff81a19448 R12: 6b6b6b6b6b6b6b6b [ 848.494699] R13: ffff8808027dc520 R14: 0000000000000000 R15: 000000000000001e [ 848.503067] FS: 0000000000000000(0000) GS:ffff88083fd00000(0000) knlGS:0000000000000000 [ 848.512899] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 848.519710] CR2: 00007ff77d001000 CR3: 00000007f7a5d000 CR4: 00000000000406e0 [ 848.528072] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 848.536446] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 848.544831] Process kworker/u:2 (pid: 5107, threadinfo ffff8807f868c000, task ffff8807ff348000) [ 848.555327] Stack: [ 848.557959] ffff8807fe86a630 ffff8807fe86a630 ffff8807f868dcd0 ffffffff8126a6e0 [ 848.567072] ffffffff817c142f ffff8807fe86a630 ffff8807f868dcf0 ffffffff8126a703 [ 848.576190] ffff8808027dc520 0000000000000286 ffff8807f868dd10 ffffffff814af1bb [ 848.585281] Call Trace: [ 848.588409] [] spin_bug+0x26/0x28 [ 848.594357] [] do_raw_spin_unlock+0x21/0x88 [ 848.601283] [] _raw_spin_unlock_irqrestore+0x2c/0x65 [ 848.609089] [] ata_scsi_port_error_handler+0x548/0x557 [libata] [ 848.618331] [] ? async_schedule+0x17/0x17 [ 848.625060] [] async_sas_ata_eh+0x45/0x69 [libsas] [ 848.632655] [] async_run_entry_fn+0x97/0x125 [ 848.639670] [] process_one_work+0x207/0x38d [ 848.646577] [] ? process_one_work+0x15a/0x38d [ 848.653681] [] worker_thread+0x138/0x21c [ 848.660305] [] ? process_one_work+0x38d/0x38d [ 848.667493] [] kthread+0x9d/0xa5 [ 848.673382] [] ? trace_hardirqs_on_caller+0x12f/0x166 [ 848.681304] [] kernel_thread_helper+0x4/0x10 [ 848.688324] [] ? retint_restore_args+0x13/0x13 [ 848.695530] [] ? __init_kthread_worker+0x5b/0x5b [ 848.702929] [] ? gs_change+0x13/0x13 [ 848.709155] Code: 00 00 48 8d 88 38 04 00 00 44 8b 80 84 02 00 00 31 c0 e8 cf 1b 24 00 41 83 c8 ff 44 8b 4b 08 48 c7 c1 e0 0b 7d 81 4d 85 e4 74 10 <45> 8b 84 24 84 02 00 00 49 8d 8c 24 38 04 00 00 8b 53 04 48 89 [ 848.732467] RIP [] spin_dump+0x5e/0x8c [ 848.738905] RSP [ 848.743743] ---[ end trace 143161646eee8caa ]--- ...so arrange for the ata_port to have the same end of life as the domain device. Reported-by: Marcin Tomczak Acked-by: Jeff Garzik Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 5 +++++ drivers/scsi/libsas/sas_discover.c | 5 +++++ drivers/scsi/libsas/sas_scsi_host.c | 3 --- 3 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 37a9e73870d..26a943eb153 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -661,8 +661,13 @@ static void async_sas_ata_eh(void *data, async_cookie_t cookie) struct ata_port *ap = dev->sata_dev.ap; struct sas_ha_struct *ha = dev->port->ha; + /* hold a reference over eh since we may be racing with final + * remove once all commands are completed + */ + kref_get(&dev->kref); ata_port_printk(ap, KERN_DEBUG, "sas eh calling libata port error handler"); ata_scsi_port_error_handler(ha->core.shost, ap); + sas_put_device(dev); } void sas_ata_strategy_handler(struct Scsi_Host *shost) diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index b91866a8233..4be5ddad7be 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -242,6 +242,11 @@ void sas_free_device(struct kref *kref) if (dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV) kfree(dev->ex_dev.ex_phy); + if (dev_is_sata(dev) && dev->sata_dev.ap) { + ata_sas_port_destroy(dev->sata_dev.ap); + dev->sata_dev.ap = NULL; + } + kfree(dev); } diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 731c8925063..b563ff27626 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -1028,9 +1028,6 @@ void sas_target_destroy(struct scsi_target *starget) if (!found_dev) return; - if (dev_is_sata(found_dev)) - ata_sas_port_destroy(found_dev->sata_dev.ap); - starget->hostdata = NULL; sas_put_device(found_dev); } -- cgit v1.2.3-70-g09d2 From d230ce691c7712c4f56ba3378d6d2f44628a49f1 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 11 Jan 2012 12:08:36 -0800 Subject: [SCSI] libsas: fix mixed topology recovery If we have a domain with sas and sata devices there may still be sas recovery actions to take after peeling off the commands to send to libata. Reported-by: Andrzej Jakowski Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 8 ++------ drivers/scsi/libsas/sas_scsi_host.c | 13 +++++++------ include/scsi/sas_ata.h | 9 ++++----- 3 files changed, 13 insertions(+), 17 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 26a943eb153..40edf520d69 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -699,10 +699,9 @@ void sas_ata_strategy_handler(struct Scsi_Host *shost) sas_enable_revalidation(sas_ha); } -int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, - struct list_head *done_q) +void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, + struct list_head *done_q) { - int rtn = 0; struct scsi_cmnd *cmd, *n; struct ata_port *ap; @@ -719,7 +718,6 @@ int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, if (ap && ap != ddev->sata_dev.ap) continue; ap = ddev->sata_dev.ap; - rtn = 1; list_move(&cmd->eh_entry, &sata_q); } @@ -741,8 +739,6 @@ int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, list_del_init(sata_q.next); } } while (ap); - - return rtn; } void sas_ata_schedule_reset(struct domain_device *dev) diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index b563ff27626..e58ca50517d 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -678,7 +678,8 @@ void sas_scsi_recover_host(struct Scsi_Host *shost) shost->host_eh_scheduled = 0; spin_unlock_irqrestore(shost->host_lock, flags); - SAS_DPRINTK("Enter %s\n", __func__); + SAS_DPRINTK("Enter %s busy: %d failed: %d\n", + __func__, shost->host_busy, shost->host_failed); /* * Deal with commands that still have SAS tasks (i.e. they didn't * complete via the normal sas_task completion mechanism) @@ -693,9 +694,9 @@ void sas_scsi_recover_host(struct Scsi_Host *shost) * scsi_unjam_host does, but we skip scsi_eh_abort_cmds because any * command we see here has no sas_task and is thus unknown to the HA. */ - if (!sas_ata_eh(shost, &eh_work_q, &ha->eh_done_q)) - if (!scsi_eh_get_sense(&eh_work_q, &ha->eh_done_q)) - scsi_eh_ready_devs(shost, &eh_work_q, &ha->eh_done_q); + sas_ata_eh(shost, &eh_work_q, &ha->eh_done_q); + if (!scsi_eh_get_sense(&eh_work_q, &ha->eh_done_q)) + scsi_eh_ready_devs(shost, &eh_work_q, &ha->eh_done_q); out: clear_bit(SAS_HA_FROZEN, &ha->state); @@ -707,8 +708,8 @@ out: scsi_eh_flush_done_q(&ha->eh_done_q); - SAS_DPRINTK("--- Exit %s\n", __func__); - return; + SAS_DPRINTK("--- Exit %s: busy: %d failed: %d\n", + __func__, shost->host_busy, shost->host_failed); } enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd) diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h index da3f3772738..cb724fd010f 100644 --- a/include/scsi/sas_ata.h +++ b/include/scsi/sas_ata.h @@ -41,8 +41,8 @@ int sas_ata_init_host_and_port(struct domain_device *found_dev, void sas_ata_task_abort(struct sas_task *task); void sas_ata_strategy_handler(struct Scsi_Host *shost); -int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, - struct list_head *done_q); +void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, + struct list_head *done_q); void sas_probe_sata(struct work_struct *work); void sas_ata_schedule_reset(struct domain_device *dev); void sas_ata_wait_eh(struct domain_device *dev); @@ -66,10 +66,9 @@ static inline void sas_ata_strategy_handler(struct Scsi_Host *shost) { } -static inline int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, - struct list_head *done_q) +static inline void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, + struct list_head *done_q) { - return 0; } static inline void sas_probe_sata(struct work_struct *work) -- cgit v1.2.3-70-g09d2 From ab5266335ba1a43461443f9823276a2b44dd1ba7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 11 Jan 2012 13:13:44 -0800 Subject: [SCSI] libsas: route local link resets through ata-eh Similar to the conversion of the transport-class reset we want bsg initiated resets to be managed by libata. Reported-by: Jacek Danecki Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_host_smp.c | 11 +++++++++- drivers/scsi/libsas/sas_init.c | 45 ++++++++++++++++++++++---------------- drivers/scsi/libsas/sas_internal.h | 1 + 3 files changed, 37 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c index bb8f49269a6..e921e532176 100644 --- a/drivers/scsi/libsas/sas_host_smp.c +++ b/drivers/scsi/libsas/sas_host_smp.c @@ -187,11 +187,14 @@ static void sas_phy_control(struct sas_ha_struct *sas_ha, u8 phy_id, struct sas_internal *i = to_sas_internal(sas_ha->core.shost->transportt); struct sas_phy_linkrates rates; + struct asd_sas_phy *asd_phy; if (phy_id >= sas_ha->num_phys) { resp_data[2] = SMP_RESP_NO_PHY; return; } + + asd_phy = sas_ha->sas_phy[phy_id]; switch (phy_op) { case PHY_FUNC_NOP: case PHY_FUNC_LINK_RESET: @@ -210,7 +213,13 @@ static void sas_phy_control(struct sas_ha_struct *sas_ha, u8 phy_id, rates.minimum_linkrate = min; rates.maximum_linkrate = max; - if (i->dft->lldd_control_phy(sas_ha->sas_phy[phy_id], phy_op, &rates)) + /* filter reset requests through libata eh */ + if (phy_op == PHY_FUNC_LINK_RESET && sas_try_ata_reset(asd_phy) == 0) { + resp_data[2] = SMP_RESP_FUNC_ACC; + return; + } + + if (i->dft->lldd_control_phy(asd_phy, phy_op, &rates)) resp_data[2] = SMP_RESP_FUNC_FAILED; else resp_data[2] = SMP_RESP_FUNC_ACC; diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index cf1b532b0e7..dc93e118146 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -196,6 +196,27 @@ static int sas_get_linkerrors(struct sas_phy *phy) return sas_smp_get_phy_events(phy); } +int sas_try_ata_reset(struct asd_sas_phy *asd_phy) +{ + struct domain_device *dev = NULL; + + /* try to route user requested link resets through libata */ + if (asd_phy->port) + dev = asd_phy->port->port_dev; + + /* validate that dev has been probed */ + if (dev) + dev = sas_find_dev_by_rphy(dev->rphy); + + if (dev && dev_is_sata(dev)) { + sas_ata_schedule_reset(dev); + sas_ata_wait_eh(dev); + return 0; + } + + return -ENODEV; +} + /** * transport_sas_phy_reset - reset a phy and permit libata to manage the link * @@ -204,7 +225,6 @@ static int sas_get_linkerrors(struct sas_phy *phy) */ static int transport_sas_phy_reset(struct sas_phy *phy, int hard_reset) { - int ret; enum phy_func reset_type; if (hard_reset) @@ -218,21 +238,10 @@ static int transport_sas_phy_reset(struct sas_phy *phy, int hard_reset) struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number]; struct sas_internal *i = to_sas_internal(sas_ha->core.shost->transportt); - struct domain_device *dev = NULL; - - if (asd_phy->port) - dev = asd_phy->port->port_dev; - - /* validate that dev has been probed */ - if (dev) - dev = sas_find_dev_by_rphy(dev->rphy); - if (dev && dev_is_sata(dev) && !hard_reset) { - sas_ata_schedule_reset(dev); - sas_ata_wait_eh(dev); - ret = 0; - } else - ret = i->dft->lldd_control_phy(asd_phy, reset_type, NULL); + if (!hard_reset && sas_try_ata_reset(asd_phy) == 0) + return 0; + return i->dft->lldd_control_phy(asd_phy, reset_type, NULL); } else { struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent); struct domain_device *ddev = sas_find_dev_by_rphy(rphy); @@ -241,12 +250,10 @@ static int transport_sas_phy_reset(struct sas_phy *phy, int hard_reset) if (ata_dev && !hard_reset) { sas_ata_schedule_reset(ata_dev); sas_ata_wait_eh(ata_dev); - ret = 0; + return 0; } else - ret = sas_smp_phy_control(ddev, phy->number, reset_type, NULL); + return sas_smp_phy_control(ddev, phy->number, reset_type, NULL); } - - return ret; } static int sas_phy_enable(struct sas_phy *phy, int enable) diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index c8febc71c40..4157f6e1eda 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -92,6 +92,7 @@ struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy); struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id); int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id, u8 *attached_sas_addr); +int sas_try_ata_reset(struct asd_sas_phy *phy); void sas_hae_reset(struct work_struct *work); void sas_free_device(struct kref *kref); -- cgit v1.2.3-70-g09d2 From 5d7f6d1071eadd020edb2cf366d358e0f6d0a0f9 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 Jan 2012 11:47:24 -0800 Subject: [SCSI] libsas: fix sas_unregister_ports vs sas_drain_work We need to hold drain_mutex across the unregistration as port down events queue device removal as chained events, so we need to make sure no other drainers are active. [ 1118.673968] WARNING: at kernel/workqueue.c:996 __queue_work+0x11a/0x326() [ 1118.681982] Hardware name: S2600CP [ 1118.686193] Modules linked in: isci(-) libsas scsi_transport_sas nls_utf8 ipv6 uinput sg iTCO_wdt iTCO_vendor_support i2c_i801 i2c_core ioatdma dca sd_mod sr_mod cdrom ahci libahci libata [last unloaded: scsi_transport_sas] [ 1118.709893] Pid: 6831, comm: rmmod Not tainted 3.2.0-isci+ #1 [ 1118.716727] Call Trace: [ 1118.719867] [] warn_slowpath_common+0x85/0x9d [ 1118.727000] [] warn_slowpath_null+0x1a/0x1c [ 1118.733942] [] __queue_work+0x11a/0x326 [ 1118.740481] [] queue_work_on+0x1b/0x22 [ 1118.746925] [] queue_work+0x37/0x3e [ 1118.753105] [] ? sas_discover_event+0x55/0x82 [libsas] [ 1118.761094] [] scsi_queue_work+0x42/0x44 [ 1118.767717] [] sas_discover_event+0x69/0x82 [libsas] [ 1118.775509] [] sas_unregister_dev+0xc3/0xcc [libsas] [ 1118.783319] [] sas_unregister_domain_devices+0x4a/0xc8 [libsas] [ 1118.792731] [] sas_deform_port+0x60/0x1a6 [libsas] [ 1118.800339] [] sas_unregister_ports+0x33/0x44 [libsas] [ 1118.808342] [] sas_unregister_ha+0x41/0x6b [libsas] [ 1118.816055] [] isci_unregister+0x22/0x4d [isci] [ 1118.823384] [] isci_pci_remove+0x2e/0x60 [isci] Reported-by: Jacek Danecki Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_event.c | 19 +++++++++++++------ drivers/scsi/libsas/sas_init.c | 18 +++++++++++------- drivers/scsi/libsas/sas_internal.h | 1 + 3 files changed, 25 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c index dbfaceeea0f..16639bbae62 100644 --- a/drivers/scsi/libsas/sas_event.c +++ b/drivers/scsi/libsas/sas_event.c @@ -51,15 +51,11 @@ static void sas_queue_event(int event, unsigned long *pending, } } -int sas_drain_work(struct sas_ha_struct *ha) + +void __sas_drain_work(struct sas_ha_struct *ha) { struct workqueue_struct *wq = ha->core.shost->work_q; struct work_struct *w, *_w; - int err; - - err = mutex_lock_interruptible(&ha->drain_mutex); - if (err) - return err; set_bit(SAS_HA_DRAINING, &ha->state); /* flush submitters */ @@ -75,6 +71,17 @@ int sas_drain_work(struct sas_ha_struct *ha) sas_queue_work(ha, w); } spin_unlock_irq(&ha->state_lock); +} + +int sas_drain_work(struct sas_ha_struct *ha) +{ + int err; + + err = mutex_lock_interruptible(&ha->drain_mutex); + if (err) + return err; + if (test_bit(SAS_HA_REGISTERED, &ha->state)) + __sas_drain_work(ha); mutex_unlock(&ha->drain_mutex); return 0; diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index dc93e118146..09c14ca3fbd 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -160,18 +160,22 @@ Undo_phys: int sas_unregister_ha(struct sas_ha_struct *sas_ha) { - unsigned long flags; - /* Set the state to unregistered to avoid further unchained - * events to be queued + * events to be queued, and flush any in-progress drainers */ - spin_lock_irqsave(&sas_ha->state_lock, flags); + mutex_lock(&sas_ha->drain_mutex); + spin_lock_irq(&sas_ha->state_lock); clear_bit(SAS_HA_REGISTERED, &sas_ha->state); - spin_unlock_irqrestore(&sas_ha->state_lock, flags); - sas_drain_work(sas_ha); + spin_unlock_irq(&sas_ha->state_lock); + __sas_drain_work(sas_ha); + mutex_unlock(&sas_ha->drain_mutex); sas_unregister_ports(sas_ha); - sas_drain_work(sas_ha); + + /* flush unregistration work */ + mutex_lock(&sas_ha->drain_mutex); + __sas_drain_work(sas_ha); + mutex_unlock(&sas_ha->drain_mutex); if (sas_ha->lldd_max_execute_num > 1) { sas_shutdown_queue(sas_ha); diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 4157f6e1eda..7818c4673c3 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -70,6 +70,7 @@ int sas_init_events(struct sas_ha_struct *sas_ha); void sas_shutdown_queue(struct sas_ha_struct *sas_ha); void sas_disable_revalidation(struct sas_ha_struct *ha); void sas_enable_revalidation(struct sas_ha_struct *ha); +void __sas_drain_work(struct sas_ha_struct *ha); void sas_deform_port(struct asd_sas_phy *phy, int gone); -- cgit v1.2.3-70-g09d2 From fdfd9d1b8912991d88fc29a456867c62515218f9 Mon Sep 17 00:00:00 2001 From: Maciej Trela Date: Fri, 13 Jan 2012 21:52:38 +0000 Subject: [SCSI] libsas: kill spurious sas_put_device Holdover from a patch rework, prior to the addition of SAS_DEV_DESTROY we were holding a reference while the destruct was pending in case the domain was torn down before the desctruct event ran. That case is covered by SAS_DEV_DESTROY, and the sas_put_device() just corrupts freed memory, or worse frees the memory while another agent holds a reference. Signed-off-by: Maciej Trela Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_discover.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 4be5ddad7be..c1ac99d25f5 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -281,8 +281,6 @@ static void sas_destruct_devices(struct work_struct *work) sas_rphy_delete(dev->rphy); dev->rphy = NULL; sas_unregister_common_dev(port, dev); - - sas_put_device(dev); } } -- cgit v1.2.3-70-g09d2 From d214d81e883b6fc6f11cc772ff88585565d45cce Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 16 Jan 2012 11:56:50 -0800 Subject: [SCSI] libsas: improve debug statements It's difficult to determine which domain_device is triggering error recovery, so convert messages like: sas: ex 5001b4da000e703f phy08:T attached: 5001b4da000e7028 sas: ex 5001b4da000e703f phy09:T attached: 5001b4da000e7029 ... ata7: sas eh calling libata port error handler ata8: sas eh calling libata port error handler ...into: sas: ex 5001517e85cfefff phy05:T:9 attached: 5001517e85cfefe5 (stp) sas: ex 5001517e3b0af0bf phy11:T:8 attached: 5001517e3b0af0ab (stp) ... sas: ata7: end_device-21:1: dev error handler sas: ata8: end_device-20:0:5: dev error handler which shows attached link rate, device type, and associates a domain_device with its ata_port id to correlate messages emitted from libata-eh. As Doug notes, we can also take the opportunity to clarify expander phy routing capabilities. [dgilbert@interlog.com: clarify table2table with 'U'] Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 43 ++++++++++++++++------ drivers/scsi/libsas/sas_expander.c | 74 ++++++++++++++++++++++++++------------ 2 files changed, 85 insertions(+), 32 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 40edf520d69..ba1ebfe991d 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -317,6 +317,28 @@ static int local_ata_check_ready(struct ata_link *link) } } +static int sas_ata_printk(const char *level, const struct domain_device *ddev, + const char *fmt, ...) +{ + struct ata_port *ap = ddev->sata_dev.ap; + struct device *dev = &ddev->rphy->dev; + struct va_format vaf; + va_list args; + int r; + + va_start(args, fmt); + + vaf.fmt = fmt; + vaf.va = &args; + + r = printk("%ssas: ata%u: %s: %pV", + level, ap->print_id, dev_name(dev), &vaf); + + va_end(args); + + return r; +} + static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, unsigned long deadline) { @@ -333,7 +355,7 @@ static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, res = i->dft->lldd_I_T_nexus_reset(dev); if (res != TMF_RESP_FUNC_COMPLETE) - SAS_DPRINTK("%s: Unable to reset ata device?\n", __func__); + sas_ata_printk(KERN_DEBUG, dev, "Unable to reset ata device?\n"); phy = sas_get_local_phy(dev); if (scsi_is_sas_phy_local(phy)) @@ -344,7 +366,7 @@ static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, ret = ata_wait_after_reset(link, deadline, check_ready); if (ret && ret != -EAGAIN) - ata_link_err(link, "COMRESET failed (errno=%d)\n", ret); + sas_ata_printk(KERN_ERR, dev, "reset failed (errno=%d)\n", ret); /* XXX: if the class changes during the reset the upper layer * should be informed, if the device has gone away we assume @@ -665,7 +687,7 @@ static void async_sas_ata_eh(void *data, async_cookie_t cookie) * remove once all commands are completed */ kref_get(&dev->kref); - ata_port_printk(ap, KERN_DEBUG, "sas eh calling libata port error handler"); + sas_ata_printk(KERN_DEBUG, dev, "dev error handler\n"); ata_scsi_port_error_handler(ha->core.shost, ap); sas_put_device(dev); } @@ -703,26 +725,27 @@ void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q) { struct scsi_cmnd *cmd, *n; - struct ata_port *ap; + struct domain_device *eh_dev; do { LIST_HEAD(sata_q); - - ap = NULL; + eh_dev = NULL; list_for_each_entry_safe(cmd, n, work_q, eh_entry) { struct domain_device *ddev = cmd_to_domain_dev(cmd); if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd)) continue; - if (ap && ap != ddev->sata_dev.ap) + if (eh_dev && eh_dev != ddev) continue; - ap = ddev->sata_dev.ap; + eh_dev = ddev; list_move(&cmd->eh_entry, &sata_q); } if (!list_empty(&sata_q)) { - ata_port_printk(ap, KERN_DEBUG, "sas eh calling libata cmd error handler\n"); + struct ata_port *ap = eh_dev->sata_dev.ap; + + sas_ata_printk(KERN_DEBUG, eh_dev, "cmd error handler\n"); ata_scsi_cmd_error_handler(shost, ap, &sata_q); /* * ata's error handler may leave the cmd on the list @@ -738,7 +761,7 @@ void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, while (!list_empty(&sata_q)) list_del_init(sata_q.next); } - } while (ap); + } while (eh_dev); } void sas_ata_schedule_reset(struct domain_device *dev) diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 68a80a00f73..4b2ecd35dc5 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -166,7 +166,22 @@ static inline void *alloc_smp_resp(int size) return kzalloc(size, GFP_KERNEL); } -/* ---------- Expander configuration ---------- */ +static char sas_route_char(struct domain_device *dev, struct ex_phy *phy) +{ + switch (phy->routing_attr) { + case TABLE_ROUTING: + if (dev->ex_dev.t2t_supp) + return 'U'; + else + return 'T'; + case DIRECT_ROUTING: + return 'D'; + case SUBTRACTIVE_ROUTING: + return 'S'; + default: + return '?'; + } +} static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *disc_resp) @@ -176,9 +191,10 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, struct smp_resp *resp = disc_resp; struct discover_resp *dr = &resp->disc; struct sas_rphy *rphy = dev->rphy; - int rediscover = (phy->phy != NULL); + bool new_phy = !phy->phy; + char *type; - if (!rediscover) { + if (new_phy) { phy->phy = sas_phy_alloc(&rphy->dev, phy_id); /* FIXME: error_handling */ @@ -223,20 +239,41 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, phy->phy->maximum_linkrate = dr->pmax_linkrate; phy->phy->negotiated_linkrate = phy->linkrate; - if (!rediscover) + if (new_phy) if (sas_phy_add(phy->phy)) { sas_phy_free(phy->phy); return; } - SAS_DPRINTK("ex %016llx phy%02d:%c attached: %016llx\n", - SAS_ADDR(dev->sas_addr), phy->phy_id, - phy->routing_attr == TABLE_ROUTING ? 'T' : - phy->routing_attr == DIRECT_ROUTING ? 'D' : - phy->routing_attr == SUBTRACTIVE_ROUTING ? 'S' : '?', - SAS_ADDR(phy->attached_sas_addr)); + switch (phy->attached_dev_type) { + case NO_DEVICE: + type = "no device"; + break; + case SAS_END_DEV: + if (phy->attached_iproto) { + if (phy->attached_tproto) + type = "host+target"; + else + type = "host"; + } else { + if (dr->attached_sata_dev) + type = "stp"; + else + type = "ssp"; + } + break; + case EDGE_DEV: + case FANOUT_DEV: + type = "smp"; + break; + default: + type = "unknown"; + } - return; + SAS_DPRINTK("ex %016llx phy%02d:%c:%X attached: %016llx (%s)\n", + SAS_ADDR(dev->sas_addr), phy->phy_id, + sas_route_char(dev, phy), phy->linkrate, + SAS_ADDR(phy->attached_sas_addr), type); } /* check if we have an existing attached ata device on this expander phy */ @@ -1176,32 +1213,25 @@ static void sas_print_parent_topology_bug(struct domain_device *child, struct ex_phy *parent_phy, struct ex_phy *child_phy) { - static const char ra_char[] = { - [DIRECT_ROUTING] = 'D', - [SUBTRACTIVE_ROUTING] = 'S', - [TABLE_ROUTING] = 'T', - }; static const char *ex_type[] = { [EDGE_DEV] = "edge", [FANOUT_DEV] = "fanout", }; struct domain_device *parent = child->parent; - sas_printk("%s ex %016llx (T2T supp:%d) phy 0x%x <--> %s ex %016llx " - "(T2T supp:%d) phy 0x%x has %c:%c routing link!\n", + sas_printk("%s ex %016llx phy 0x%x <--> %s ex %016llx " + "phy 0x%x has %c:%c routing link!\n", ex_type[parent->dev_type], SAS_ADDR(parent->sas_addr), - parent->ex_dev.t2t_supp, parent_phy->phy_id, ex_type[child->dev_type], SAS_ADDR(child->sas_addr), - child->ex_dev.t2t_supp, child_phy->phy_id, - ra_char[parent_phy->routing_attr], - ra_char[child_phy->routing_attr]); + sas_route_char(parent, parent_phy), + sas_route_char(child, child_phy)); } static int sas_check_eeds(struct domain_device *child, -- cgit v1.2.3-70-g09d2 From a692b0eec5efae382dfa800e8b4b083f172921a7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 16 Jan 2012 13:54:28 -0800 Subject: [SCSI] libsas: fix sas port naming Make sas-port naming consistent with the expander-attached case whereby the phy-id is the last digit in the port name. Otherwise we get the random behavior of the allocation order. Reported-by: Patrick Thomson Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_port.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index 59ee8a0a6ea..29f8fd33552 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -122,7 +122,7 @@ static void sas_form_port(struct asd_sas_phy *phy) spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags); if (!port->port) { - port->port = sas_port_alloc(phy->phy->dev.parent, port->id); + port->port = sas_port_alloc(phy->phy->dev.parent, phy->id); BUG_ON(!port->port); sas_port_add(port->port); } -- cgit v1.2.3-70-g09d2 From 354cf82980e2449e71fdaa3c6f170357ebd65467 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 Jan 2012 17:57:35 -0800 Subject: [SCSI] libsas: let libata recover links that fail to transmit initial sig-fis libsas fails to discover all sata devices in the domain. If a device fails negotiation and does not transmit a signature fis the link needs recovery. libata already understands how to manage slow to come up links, so treat these conditions as ata device attach events for the purposes of creating an ata_port. This allows libata to manage retrying link bring up. Rediscovery is modified to be careful about checking changes in dev_type. It looks like libsas leaks old devices if the sas address changes, but that's a fix for another patch. Acked-by: Jack Wang Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 71 +++++++++++++-- drivers/scsi/libsas/sas_discover.c | 1 + drivers/scsi/libsas/sas_expander.c | 178 +++++++++++++++++++++---------------- drivers/scsi/libsas/sas_internal.h | 6 +- include/scsi/sas.h | 4 +- include/scsi/sas_ata.h | 8 +- 6 files changed, 179 insertions(+), 89 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index ba1ebfe991d..25008a42412 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -278,26 +278,84 @@ static struct sas_internal *dev_to_sas_internal(struct domain_device *dev) return to_sas_internal(dev->port->ha->core.shost->transportt); } +static void sas_get_ata_command_set(struct domain_device *dev); + +int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy) +{ + if (phy->attached_tproto & SAS_PROTOCOL_STP) + dev->tproto = phy->attached_tproto; + if (phy->attached_sata_dev) + dev->tproto |= SATA_DEV; + + if (phy->attached_dev_type == SATA_PENDING) + dev->dev_type = SATA_PENDING; + else { + int res; + + dev->dev_type = SATA_DEV; + res = sas_get_report_phy_sata(dev->parent, phy->phy_id, + &dev->sata_dev.rps_resp); + if (res) { + SAS_DPRINTK("report phy sata to %016llx:0x%x returned " + "0x%x\n", SAS_ADDR(dev->parent->sas_addr), + phy->phy_id, res); + return res; + } + memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis, + sizeof(struct dev_to_host_fis)); + /* TODO switch to ata_dev_classify() */ + sas_get_ata_command_set(dev); + } + return 0; +} + +static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy) +{ + int res; + + /* we weren't pending, so successfully end the reset sequence now */ + if (dev->dev_type != SATA_PENDING) + return 1; + + /* hmmm, if this succeeds do we need to repost the domain_device to the + * lldd so it can pick up new parameters? + */ + res = sas_get_ata_info(dev, phy); + if (res) + return 0; /* retry */ + else + return 1; +} + static int smp_ata_check_ready(struct ata_link *link) { int res; - u8 addr[8]; struct ata_port *ap = link->ap; struct domain_device *dev = ap->private_data; struct domain_device *ex_dev = dev->parent; struct sas_phy *phy = sas_get_local_phy(dev); + struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy->number]; - res = sas_get_phy_attached_sas_addr(ex_dev, phy->number, addr); + res = sas_ex_phy_discover(ex_dev, phy->number); sas_put_local_phy(phy); + /* break the wait early if the expander is unreachable, * otherwise keep polling */ if (res == -ECOMM) return res; - if (res != SMP_RESP_FUNC_ACC || SAS_ADDR(addr) == 0) + if (res != SMP_RESP_FUNC_ACC) return 0; - else - return 1; + + switch (ex_phy->attached_dev_type) { + case SATA_PENDING: + return 0; + case SAS_END_DEV: + if (ex_phy->attached_sata_dev) + return sas_ata_clear_pending(dev, ex_phy); + default: + return -ENODEV; + } } static int local_ata_check_ready(struct ata_link *link) @@ -584,6 +642,9 @@ static void sas_get_ata_command_set(struct domain_device *dev) struct dev_to_host_fis *fis = (struct dev_to_host_fis *) dev->frame_rcvd; + if (dev->dev_type == SATA_PENDING) + return; + if ((fis->sector_count == 1 && /* ATA */ fis->lbal == 1 && fis->lbam == 0 && diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index c1ac99d25f5..8bcfcaa7b2e 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -48,6 +48,7 @@ void sas_init_dev(struct domain_device *dev) case SATA_DEV: case SATA_PM: case SATA_PM_PORT: + case SATA_PENDING: INIT_LIST_HEAD(&dev->sata_dev.children); break; default: diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 4b2ecd35dc5..7e2d3c4c617 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -183,13 +183,27 @@ static char sas_route_char(struct domain_device *dev, struct ex_phy *phy) } } -static void sas_set_ex_phy(struct domain_device *dev, int phy_id, - void *disc_resp) +static enum sas_dev_type to_dev_type(struct discover_resp *dr) { + /* This is detecting a failure to transmit initial dev to host + * FIS as described in section J.5 of sas-2 r16 + */ + if (dr->attached_dev_type == NO_DEVICE && dr->attached_sata_dev && + dr->linkrate >= SAS_LINK_RATE_1_5_GBPS) + return SATA_PENDING; + else + return dr->attached_dev_type; +} + +static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) +{ + enum sas_dev_type dev_type; + enum sas_linkrate linkrate; + u8 sas_addr[SAS_ADDR_SIZE]; + struct smp_resp *resp = rsp; + struct discover_resp *dr = &resp->disc; struct expander_device *ex = &dev->ex_dev; struct ex_phy *phy = &ex->ex_phy[phy_id]; - struct smp_resp *resp = disc_resp; - struct discover_resp *dr = &resp->disc; struct sas_rphy *rphy = dev->rphy; bool new_phy = !phy->phy; char *type; @@ -213,8 +227,13 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, break; } + /* check if anything important changed to squelch debug */ + dev_type = phy->attached_dev_type; + linkrate = phy->linkrate; + memcpy(sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); + + phy->attached_dev_type = to_dev_type(dr); phy->phy_id = phy_id; - phy->attached_dev_type = dr->attached_dev_type; phy->linkrate = dr->linkrate; phy->attached_sata_host = dr->attached_sata_host; phy->attached_sata_dev = dr->attached_sata_dev; @@ -229,7 +248,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, phy->last_da_index = -1; phy->phy->identify.sas_address = SAS_ADDR(phy->attached_sas_addr); - phy->phy->identify.device_type = phy->attached_dev_type; + phy->phy->identify.device_type = dr->attached_dev_type; phy->phy->identify.initiator_port_protocols = phy->attached_iproto; phy->phy->identify.target_port_protocols = phy->attached_tproto; phy->phy->identify.phy_identifier = phy_id; @@ -246,6 +265,9 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, } switch (phy->attached_dev_type) { + case SATA_PENDING: + type = "stp pending"; + break; case NO_DEVICE: type = "no device"; break; @@ -270,6 +292,16 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, type = "unknown"; } + /* this routine is polled by libata error recovery so filter + * unimportant messages + */ + if (new_phy || phy->attached_dev_type != dev_type || + phy->linkrate != linkrate || + SAS_ADDR(phy->attached_sas_addr) != SAS_ADDR(sas_addr)) + /* pass */; + else + return; + SAS_DPRINTK("ex %016llx phy%02d:%c:%X attached: %016llx (%s)\n", SAS_ADDR(dev->sas_addr), phy->phy_id, sas_route_char(dev, phy), phy->linkrate, @@ -304,50 +336,25 @@ struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id) static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req, u8 *disc_resp, int single) { - struct domain_device *ata_dev = sas_ex_to_ata(dev, single); - int i, res; + struct discover_resp *dr; + int res; disc_req[9] = single; - for (i = 1 ; i < 3; i++) { - struct discover_resp *dr; - res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE, - disc_resp, DISCOVER_RESP_SIZE); - if (res) - return res; - dr = &((struct smp_resp *)disc_resp)->disc; - if (memcmp(dev->sas_addr, dr->attached_sas_addr, - SAS_ADDR_SIZE) == 0) { - sas_printk("Found loopback topology, just ignore it!\n"); - return 0; - } - - /* This is detecting a failure to transmit initial - * dev to host FIS as described in section J.5 of - * sas-2 r16 - */ - if (!(dr->attached_dev_type == 0 && - dr->attached_sata_dev)) - break; - - /* In order to generate the dev to host FIS, we send a - * link reset to the expander port. If a device was - * previously detected on this port we ask libata to - * manage the reset and link recovery. - */ - if (ata_dev) { - sas_ata_schedule_reset(ata_dev); - break; - } - sas_smp_phy_control(dev, single, PHY_FUNC_LINK_RESET, NULL); - /* Wait for the reset to trigger the negotiation */ - msleep(500); + res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE, + disc_resp, DISCOVER_RESP_SIZE); + if (res) + return res; + dr = &((struct smp_resp *)disc_resp)->disc; + if (memcmp(dev->sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE) == 0) { + sas_printk("Found loopback topology, just ignore it!\n"); + return 0; } sas_set_ex_phy(dev, single, disc_resp); return 0; } -static int sas_ex_phy_discover(struct domain_device *dev, int single) +int sas_ex_phy_discover(struct domain_device *dev, int single) { struct expander_device *ex = &dev->ex_dev; int res = 0; @@ -652,9 +659,8 @@ int sas_smp_get_phy_events(struct sas_phy *phy) #define RPS_REQ_SIZE 16 #define RPS_RESP_SIZE 60 -static int sas_get_report_phy_sata(struct domain_device *dev, - int phy_id, - struct smp_resp *rps_resp) +int sas_get_report_phy_sata(struct domain_device *dev, int phy_id, + struct smp_resp *rps_resp) { int res; u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE); @@ -764,21 +770,9 @@ static struct domain_device *sas_ex_discover_end_dev( #ifdef CONFIG_SCSI_SAS_ATA if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) { - child->dev_type = SATA_DEV; - if (phy->attached_tproto & SAS_PROTOCOL_STP) - child->tproto = phy->attached_tproto; - if (phy->attached_sata_dev) - child->tproto |= SATA_DEV; - res = sas_get_report_phy_sata(parent, phy_id, - &child->sata_dev.rps_resp); - if (res) { - SAS_DPRINTK("report phy sata to %016llx:0x%x returned " - "0x%x\n", SAS_ADDR(parent->sas_addr), - phy_id, res); + res = sas_get_ata_info(child, phy); + if (res) goto out_free; - } - memcpy(child->frame_rcvd, &child->sata_dev.rps_resp.rps.fis, - sizeof(struct dev_to_host_fis)); rphy = sas_end_device_alloc(phy->port); if (unlikely(!rphy)) @@ -993,7 +987,8 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) if (ex_phy->attached_dev_type != SAS_END_DEV && ex_phy->attached_dev_type != FANOUT_DEV && - ex_phy->attached_dev_type != EDGE_DEV) { + ex_phy->attached_dev_type != EDGE_DEV && + ex_phy->attached_dev_type != SATA_PENDING) { SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx " "phy 0x%x\n", ex_phy->attached_dev_type, SAS_ADDR(dev->sas_addr), @@ -1019,6 +1014,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) switch (ex_phy->attached_dev_type) { case SAS_END_DEV: + case SATA_PENDING: child = sas_ex_discover_end_dev(dev, phy_id); break; case FANOUT_DEV: @@ -1688,8 +1684,8 @@ static int sas_get_phy_change_count(struct domain_device *dev, return res; } -int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id, - u8 *attached_sas_addr) +static int sas_get_phy_attached_dev(struct domain_device *dev, int phy_id, + u8 *sas_addr, enum sas_dev_type *type) { int res; struct smp_resp *disc_resp; @@ -1701,10 +1697,11 @@ int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id, dr = &disc_resp->disc; res = sas_get_phy_discover(dev, phy_id, disc_resp); - if (!res) { - memcpy(attached_sas_addr,disc_resp->disc.attached_sas_addr,8); - if (dr->attached_dev_type == 0) - memset(attached_sas_addr, 0, 8); + if (res == 0) { + memcpy(sas_addr, disc_resp->disc.attached_sas_addr, 8); + *type = to_dev_type(dr); + if (*type == 0) + memset(sas_addr, 0, 8); } kfree(disc_resp); return res; @@ -1953,39 +1950,62 @@ out: return res; } +static bool dev_type_flutter(enum sas_dev_type new, enum sas_dev_type old) +{ + if (old == new) + return true; + + /* treat device directed resets as flutter, if we went + * SAS_END_DEV to SATA_PENDING the link needs recovery + */ + if ((old == SATA_PENDING && new == SAS_END_DEV) || + (old == SAS_END_DEV && new == SATA_PENDING)) + return true; + + return false; +} + static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last) { struct expander_device *ex = &dev->ex_dev; struct ex_phy *phy = &ex->ex_phy[phy_id]; - u8 attached_sas_addr[8]; + enum sas_dev_type type = NO_DEVICE; + u8 sas_addr[8]; int res; - res = sas_get_phy_attached_sas_addr(dev, phy_id, attached_sas_addr); + res = sas_get_phy_attached_dev(dev, phy_id, sas_addr, &type); switch (res) { case SMP_RESP_NO_PHY: phy->phy_state = PHY_NOT_PRESENT; sas_unregister_devs_sas_addr(dev, phy_id, last); - goto out; break; + return res; case SMP_RESP_PHY_VACANT: phy->phy_state = PHY_VACANT; sas_unregister_devs_sas_addr(dev, phy_id, last); - goto out; break; + return res; case SMP_RESP_FUNC_ACC: break; } - if (SAS_ADDR(attached_sas_addr) == 0) { + if (SAS_ADDR(sas_addr) == 0) { phy->phy_state = PHY_EMPTY; sas_unregister_devs_sas_addr(dev, phy_id, last); - } else if (SAS_ADDR(attached_sas_addr) == - SAS_ADDR(phy->attached_sas_addr)) { - SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n", - SAS_ADDR(dev->sas_addr), phy_id); + return res; + } else if (SAS_ADDR(sas_addr) == SAS_ADDR(phy->attached_sas_addr) && + dev_type_flutter(type, phy->attached_dev_type)) { + struct domain_device *ata_dev = sas_ex_to_ata(dev, phy_id); + char *action = ""; + sas_ex_phy_discover(dev, phy_id); - } else - res = sas_discover_new(dev, phy_id); -out: - return res; + + if (ata_dev && phy->attached_dev_type == SATA_PENDING) + action = ", needs recovery"; + SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter%s\n", + SAS_ADDR(dev->sas_addr), phy_id, action); + return res; + } + + return sas_discover_new(dev, phy_id); } /** diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 7818c4673c3..e028d7a4420 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -91,8 +91,9 @@ int sas_smp_get_phy_events(struct sas_phy *phy); void sas_device_set_phy(struct domain_device *dev, struct sas_port *port); struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy); struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id); -int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id, - u8 *attached_sas_addr); +int sas_ex_phy_discover(struct domain_device *dev, int single); +int sas_get_report_phy_sata(struct domain_device *dev, int phy_id, + struct smp_resp *rps_resp); int sas_try_ata_reset(struct asd_sas_phy *phy); void sas_hae_reset(struct work_struct *work); @@ -122,6 +123,7 @@ static inline void sas_fill_in_rphy(struct domain_device *dev, case SATA_DEV: /* FIXME: need sata device type */ case SAS_END_DEV: + case SATA_PENDING: rphy->identify.device_type = SAS_END_DEVICE; break; case EDGE_DEV: diff --git a/include/scsi/sas.h b/include/scsi/sas.h index 3673d685e6a..a577a833603 100644 --- a/include/scsi/sas.h +++ b/include/scsi/sas.h @@ -89,8 +89,7 @@ enum sas_oob_mode { SAS_OOB_MODE }; -/* See sas_discover.c if you plan on changing these. - */ +/* See sas_discover.c if you plan on changing these */ enum sas_dev_type { NO_DEVICE = 0, /* protocol */ SAS_END_DEV = 1, /* protocol */ @@ -100,6 +99,7 @@ enum sas_dev_type { SATA_DEV = 5, SATA_PM = 7, SATA_PM_PORT= 8, + SATA_PENDING = 9, }; enum sas_protocol { diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h index cb724fd010f..0ca2f8a6bc6 100644 --- a/include/scsi/sas_ata.h +++ b/include/scsi/sas_ata.h @@ -33,9 +33,10 @@ static inline int dev_is_sata(struct domain_device *dev) { return dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM || - dev->dev_type == SATA_PM_PORT; + dev->dev_type == SATA_PM_PORT || dev->dev_type == SATA_PENDING; } +int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy); int sas_ata_init_host_and_port(struct domain_device *found_dev, struct scsi_target *starget); @@ -82,6 +83,11 @@ static inline void sas_ata_schedule_reset(struct domain_device *dev) static inline void sas_ata_wait_eh(struct domain_device *dev) { } + +static inline int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy) +{ + return 0; +} #endif #endif /* _SAS_ATA_H_ */ -- cgit v1.2.3-70-g09d2 From c666aae6919114d6cff789d79f80cfa85f3a7339 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Jan 2012 18:43:08 -0800 Subject: [SCSI] libsas: delete device on sas address changed If the phy is attached to a new sas address unregister the first address before processing the new attachment. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_expander.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 7e2d3c4c617..d63f0fbcd10 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -2005,6 +2005,15 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last) return res; } + /* delete the old link */ + if (SAS_ADDR(phy->attached_sas_addr) && + SAS_ADDR(sas_addr) != SAS_ADDR(phy->attached_sas_addr)) { + SAS_DPRINTK("ex %016llx phy 0x%x replace %016llx\n", + SAS_ADDR(dev->sas_addr), phy_id, + SAS_ADDR(phy->attached_sas_addr)); + sas_unregister_devs_sas_addr(dev, phy_id, last); + } + return sas_discover_new(dev, phy_id); } -- cgit v1.2.3-70-g09d2 From 92625f9bff3853951cc75f5bc084ee67c1317d2f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 18 Jan 2012 20:14:01 -0800 Subject: [SCSI] libsas: restore scan order ata devices are always scanned after ssp. Prior to the ata error handling reworks libsas would tend to scan devices in ascending expander phy order. Restore this ordering by deferring ssp discovery to a DISCE_PROBE event, and keep the probe order consistent with the discovery order, not the placement of sata devices. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 29 ------------------------- drivers/scsi/libsas/sas_discover.c | 44 +++++++++++++++++++++++++++----------- drivers/scsi/libsas/sas_expander.c | 4 +--- include/scsi/sas_ata.h | 5 ----- 4 files changed, 32 insertions(+), 50 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 25008a42412..a9ec1643ee9 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -683,35 +683,6 @@ static void sas_get_ata_command_set(struct domain_device *dev) dev->sata_dev.command_set = ATAPI_COMMAND_SET; } -void sas_probe_sata(struct work_struct *work) -{ - struct domain_device *dev, *n; - struct sas_discovery_event *ev = - container_of(work, struct sas_discovery_event, work); - struct asd_sas_port *port = ev->port; - - clear_bit(DISCE_PROBE, &port->disc.pending); - - list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { - int err; - - spin_lock_irq(&port->dev_list_lock); - list_add_tail(&dev->dev_list_node, &port->dev_list); - spin_unlock_irq(&port->dev_list_lock); - - err = sas_rphy_add(dev->rphy); - - if (err) { - SAS_DPRINTK("%s: for %s device %16llx returned %d\n", - __func__, dev->parent ? "exp-attached" : - "direct-attached", - SAS_ADDR(dev->sas_addr), err); - sas_unregister_dev(port, dev); - } else - list_del_init(&dev->disco_list_node); - } -} - /** * sas_discover_sata -- discover an STP/SATA domain device * @dev: pointer to struct domain_device of interest diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 8bcfcaa7b2e..18fa364aa00 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -152,7 +152,7 @@ static int sas_get_port_device(struct asd_sas_port *port) dev->rphy = rphy; - if (dev_is_sata(dev)) + if (dev_is_sata(dev) || dev->dev_type == SAS_END_DEV) list_add_tail(&dev->disco_list_node, &port->disco_list); else { spin_lock_irq(&port->dev_list_lock); @@ -198,8 +198,34 @@ void sas_notify_lldd_dev_gone(struct domain_device *dev) } } -/* ---------- Common/dispatchers ---------- */ +static void sas_probe_devices(struct work_struct *work) +{ + struct domain_device *dev, *n; + struct sas_discovery_event *ev = + container_of(work, struct sas_discovery_event, work); + struct asd_sas_port *port = ev->port; + clear_bit(DISCE_PROBE, &port->disc.pending); + + list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { + int err; + + spin_lock_irq(&port->dev_list_lock); + list_add_tail(&dev->dev_list_node, &port->dev_list); + spin_unlock_irq(&port->dev_list_lock); + + err = sas_rphy_add(dev->rphy); + + if (err) { + SAS_DPRINTK("%s: for %s device %16llx returned %d\n", + __func__, dev->parent ? "exp-attached" : + "direct-attached", + SAS_ADDR(dev->sas_addr), err); + sas_unregister_dev(port, dev); + } else + list_del_init(&dev->disco_list_node); + } +} /** * sas_discover_end_dev -- discover an end device (SSP, etc) @@ -213,18 +239,10 @@ int sas_discover_end_dev(struct domain_device *dev) res = sas_notify_lldd_dev_found(dev); if (res) - goto out_err2; - - res = sas_rphy_add(dev->rphy); - if (res) - goto out_err; + return res; + sas_discover_event(dev->port, DISCE_PROBE); return 0; - -out_err: - sas_notify_lldd_dev_gone(dev); -out_err2: - return res; } /* ---------- Device registration and unregistration ---------- */ @@ -491,7 +509,7 @@ void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *port) static const work_func_t sas_event_fns[DISC_NUM_EVENTS] = { [DISCE_DISCOVER_DOMAIN] = sas_discover_domain, [DISCE_REVALIDATE_DOMAIN] = sas_revalidate_domain, - [DISCE_PROBE] = sas_probe_sata, + [DISCE_PROBE] = sas_probe_devices, [DISCE_DESTRUCT] = sas_destruct_devices, }; diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index d63f0fbcd10..14e3244c1b2 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -806,9 +806,7 @@ static struct domain_device *sas_ex_discover_end_dev( child->rphy = rphy; sas_fill_in_rphy(child, rphy); - spin_lock_irq(&parent->port->dev_list_lock); - list_add_tail(&child->dev_list_node, &parent->port->dev_list); - spin_unlock_irq(&parent->port->dev_list_lock); + list_add_tail(&child->disco_list_node, &parent->port->disco_list); res = sas_discover_end_dev(child); if (res) { diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h index 0ca2f8a6bc6..1556eff4cc4 100644 --- a/include/scsi/sas_ata.h +++ b/include/scsi/sas_ata.h @@ -44,7 +44,6 @@ void sas_ata_task_abort(struct sas_task *task); void sas_ata_strategy_handler(struct Scsi_Host *shost); void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q); -void sas_probe_sata(struct work_struct *work); void sas_ata_schedule_reset(struct domain_device *dev); void sas_ata_wait_eh(struct domain_device *dev); #else @@ -72,10 +71,6 @@ static inline void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, { } -static inline void sas_probe_sata(struct work_struct *work) -{ -} - static inline void sas_ata_schedule_reset(struct domain_device *dev) { } -- cgit v1.2.3-70-g09d2 From 9508a66f898d46e726a318469312b45e0b1d078b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 18 Jan 2012 20:47:01 -0800 Subject: [SCSI] libsas: async ata scanning libsas ata error handling is already async but this does not help the scan case. Move initial link recovery out from under host->scan_mutex, and delay synchronization with eh until after all port probe/recovery work has been queued. Device ordering is maintained with scan order by still calling sas_rphy_add() in order of domain discovery. Since we now scan the domain list when invoking libata-eh we need to be careful to check for fully initialized ata ports. Acked-by: Jack Wang Acked-by: Jeff Garzik Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/ata/libata-core.c | 34 +++++++++-------- drivers/ata/libata-scsi.c | 13 +++++++ drivers/ata/libata.h | 1 + drivers/scsi/aic94xx/aic94xx_init.c | 1 - drivers/scsi/isci/init.c | 1 - drivers/scsi/libsas/sas_ata.c | 74 +++++++++++++++++++++++++++++++------ drivers/scsi/libsas/sas_discover.c | 22 +++++------ drivers/scsi/libsas/sas_internal.h | 9 +++++ drivers/scsi/libsas/sas_scsi_host.c | 18 --------- drivers/scsi/mvsas/mv_init.c | 1 - drivers/scsi/pm8001/pm8001_init.c | 1 - include/linux/libata.h | 1 + include/scsi/libsas.h | 1 - include/scsi/sas_ata.h | 12 +++--- 14 files changed, 123 insertions(+), 66 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index c06e0ec1155..e0bda9ff89c 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5936,29 +5936,31 @@ void ata_host_init(struct ata_host *host, struct device *dev, host->ops = ops; } -int ata_port_probe(struct ata_port *ap) +void __ata_port_probe(struct ata_port *ap) { - int rc = 0; + struct ata_eh_info *ehi = &ap->link.eh_info; + unsigned long flags; - /* probe */ - if (ap->ops->error_handler) { - struct ata_eh_info *ehi = &ap->link.eh_info; - unsigned long flags; + /* kick EH for boot probing */ + spin_lock_irqsave(ap->lock, flags); - /* kick EH for boot probing */ - spin_lock_irqsave(ap->lock, flags); + ehi->probe_mask |= ATA_ALL_DEVICES; + ehi->action |= ATA_EH_RESET; + ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; - ehi->probe_mask |= ATA_ALL_DEVICES; - ehi->action |= ATA_EH_RESET; - ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; + ap->pflags &= ~ATA_PFLAG_INITIALIZING; + ap->pflags |= ATA_PFLAG_LOADING; + ata_port_schedule_eh(ap); - ap->pflags &= ~ATA_PFLAG_INITIALIZING; - ap->pflags |= ATA_PFLAG_LOADING; - ata_port_schedule_eh(ap); + spin_unlock_irqrestore(ap->lock, flags); +} - spin_unlock_irqrestore(ap->lock, flags); +int ata_port_probe(struct ata_port *ap) +{ + int rc = 0; - /* wait for EH to finish */ + if (ap->ops->error_handler) { + __ata_port_probe(ap); ata_port_wait_eh(ap); } else { DPRINTK("ata%u: bus probe begin\n", ap->print_id); diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 508a60bfe5c..1ee00c8b5b0 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3838,6 +3838,19 @@ void ata_sas_port_stop(struct ata_port *ap) } EXPORT_SYMBOL_GPL(ata_sas_port_stop); +int ata_sas_async_port_init(struct ata_port *ap) +{ + int rc = ap->ops->port_start(ap); + + if (!rc) { + ap->print_id = ata_print_id++; + __ata_port_probe(ap); + } + + return rc; +} +EXPORT_SYMBOL_GPL(ata_sas_async_port_init); + /** * ata_sas_port_init - Initialize a SATA device * @ap: SATA port to initialize diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 1fab235ee51..2e26fcaf635 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -105,6 +105,7 @@ extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); extern struct ata_port *ata_port_alloc(struct ata_host *host); extern const char *sata_spd_string(unsigned int spd); extern int ata_port_probe(struct ata_port *ap); +extern void __ata_port_probe(struct ata_port *ap); /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c index eea988a04f9..ff80552ead8 100644 --- a/drivers/scsi/aic94xx/aic94xx_init.c +++ b/drivers/scsi/aic94xx/aic94xx_init.c @@ -81,7 +81,6 @@ static struct scsi_host_template aic94xx_sht = { .use_clustering = ENABLE_CLUSTERING, .eh_device_reset_handler = sas_eh_device_reset_handler, .eh_bus_reset_handler = sas_eh_bus_reset_handler, - .slave_alloc = sas_slave_alloc, .target_destroy = sas_target_destroy, .ioctl = sas_ioctl, }; diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index c3fe39bcacd..c9af456e7df 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -165,7 +165,6 @@ static struct scsi_host_template isci_sht = { .sg_tablesize = SG_ALL, .max_sectors = SCSI_DEFAULT_MAX_SECTORS, .use_clustering = ENABLE_CLUSTERING, - .slave_alloc = sas_slave_alloc, .target_destroy = sas_target_destroy, .ioctl = sas_ioctl, .shost_attrs = isci_host_attrs, diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index a9ec1643ee9..eb8b77c8616 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -585,11 +585,10 @@ static struct ata_port_info sata_port_info = { .port_ops = &sas_sata_ops }; -int sas_ata_init_host_and_port(struct domain_device *found_dev, - struct scsi_target *starget) +int sas_ata_init_host_and_port(struct domain_device *found_dev) { - struct Scsi_Host *shost = dev_to_shost(&starget->dev); - struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); + struct sas_ha_struct *ha = found_dev->port->ha; + struct Scsi_Host *shost = ha->core.shost; struct ata_port *ap; ata_host_init(&found_dev->sata_dev.ata_host, @@ -607,6 +606,8 @@ int sas_ata_init_host_and_port(struct domain_device *found_dev, ap->private_data = found_dev; ap->cbl = ATA_CBL_SATA; ap->scsi_host = shost; + /* publish initialized ata port */ + smp_wmb(); found_dev->sata_dev.ap = ap; return 0; @@ -683,6 +684,38 @@ static void sas_get_ata_command_set(struct domain_device *dev) dev->sata_dev.command_set = ATAPI_COMMAND_SET; } +void sas_probe_sata(struct asd_sas_port *port) +{ + struct domain_device *dev, *n; + int err; + + mutex_lock(&port->ha->disco_mutex); + list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { + if (!dev_is_sata(dev)) + continue; + + err = sas_ata_init_host_and_port(dev); + if (err) + sas_fail_probe(dev, __func__, err); + else + ata_sas_async_port_init(dev->sata_dev.ap); + } + mutex_unlock(&port->ha->disco_mutex); + + list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { + if (!dev_is_sata(dev)) + continue; + + sas_ata_wait_eh(dev); + + /* if libata could not bring the link up, don't surface + * the device + */ + if (ata_dev_disabled(sas_to_ata_dev(dev))) + sas_fail_probe(dev, __func__, -ENODEV); + } +} + /** * sas_discover_sata -- discover an STP/SATA domain device * @dev: pointer to struct domain_device of interest @@ -724,11 +757,23 @@ static void async_sas_ata_eh(void *data, async_cookie_t cookie) sas_put_device(dev); } +static bool sas_ata_dev_eh_valid(struct domain_device *dev) +{ + struct ata_port *ap; + + if (!dev_is_sata(dev)) + return false; + ap = dev->sata_dev.ap; + /* consume fully initialized ata ports */ + smp_rmb(); + return !!ap; +} + void sas_ata_strategy_handler(struct Scsi_Host *shost) { - struct scsi_device *sdev; struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); LIST_HEAD(async); + int i; /* it's ok to defer revalidation events during ata eh, these * disks are in one of three states: @@ -740,14 +785,21 @@ void sas_ata_strategy_handler(struct Scsi_Host *shost) */ sas_disable_revalidation(sas_ha); - shost_for_each_device(sdev, shost) { - struct domain_device *ddev = sdev_to_domain_dev(sdev); - - if (!dev_is_sata(ddev)) - continue; + spin_lock_irq(&sas_ha->phy_port_lock); + for (i = 0; i < sas_ha->num_phys; i++) { + struct asd_sas_port *port = sas_ha->sas_port[i]; + struct domain_device *dev; - async_schedule_domain(async_sas_ata_eh, ddev, &async); + spin_lock(&port->dev_list_lock); + list_for_each_entry(dev, &port->dev_list, dev_list_node) { + if (!sas_ata_dev_eh_valid(dev)) + continue; + async_schedule_domain(async_sas_ata_eh, dev, &async); + } + spin_unlock(&port->dev_list_lock); } + spin_unlock_irq(&sas_ha->phy_port_lock); + async_synchronize_full_domain(&async); sas_enable_revalidation(sas_ha); diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 18fa364aa00..0d58a8beaa3 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -207,22 +207,22 @@ static void sas_probe_devices(struct work_struct *work) clear_bit(DISCE_PROBE, &port->disc.pending); - list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { - int err; - + /* devices must be domain members before link recovery and probe */ + list_for_each_entry(dev, &port->disco_list, disco_list_node) { spin_lock_irq(&port->dev_list_lock); list_add_tail(&dev->dev_list_node, &port->dev_list); spin_unlock_irq(&port->dev_list_lock); + } - err = sas_rphy_add(dev->rphy); + sas_probe_sata(port); - if (err) { - SAS_DPRINTK("%s: for %s device %16llx returned %d\n", - __func__, dev->parent ? "exp-attached" : - "direct-attached", - SAS_ADDR(dev->sas_addr), err); - sas_unregister_dev(port, dev); - } else + list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { + int err; + + err = sas_rphy_add(dev->rphy); + if (err) + sas_fail_probe(dev, __func__, err); + else list_del_init(&dev->disco_list_node); } } diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index e028d7a4420..d0d9bf10f79 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -113,6 +113,15 @@ static inline int sas_smp_host_handler(struct Scsi_Host *shost, } #endif +static inline void sas_fail_probe(struct domain_device *dev, const char *func, int err) +{ + SAS_DPRINTK("%s: for %s device %16llx returned %d\n", + func, dev->parent ? "exp-attached" : + "direct-attached", + SAS_ADDR(dev->sas_addr), err); + sas_unregister_dev(dev->port, dev); +} + static inline void sas_fill_in_rphy(struct domain_device *dev, struct sas_rphy *rphy) { diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index e58ca50517d..3701ff7e726 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -762,17 +762,10 @@ int sas_target_alloc(struct scsi_target *starget) { struct sas_rphy *rphy = dev_to_rphy(starget->dev.parent); struct domain_device *found_dev = sas_find_dev_by_rphy(rphy); - int res; if (!found_dev) return -ENODEV; - if (dev_is_sata(found_dev)) { - res = sas_ata_init_host_and_port(found_dev, starget); - if (res) - return res; - } - kref_get(&found_dev->kref); starget->hostdata = found_dev; return 0; @@ -1012,16 +1005,6 @@ void sas_task_abort(struct sas_task *task) } } -int sas_slave_alloc(struct scsi_device *scsi_dev) -{ - struct domain_device *dev = sdev_to_domain_dev(scsi_dev); - - if (dev_is_sata(dev)) - return ata_sas_port_init(dev->sata_dev.ap); - - return 0; -} - void sas_target_destroy(struct scsi_target *starget) { struct domain_device *found_dev = starget->hostdata; @@ -1082,6 +1065,5 @@ EXPORT_SYMBOL_GPL(sas_task_abort); EXPORT_SYMBOL_GPL(sas_phy_reset); EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler); EXPORT_SYMBOL_GPL(sas_eh_bus_reset_handler); -EXPORT_SYMBOL_GPL(sas_slave_alloc); EXPORT_SYMBOL_GPL(sas_target_destroy); EXPORT_SYMBOL_GPL(sas_ioctl); diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c index d45878b3125..cc59dff3810 100644 --- a/drivers/scsi/mvsas/mv_init.c +++ b/drivers/scsi/mvsas/mv_init.c @@ -73,7 +73,6 @@ static struct scsi_host_template mvs_sht = { .use_clustering = ENABLE_CLUSTERING, .eh_device_reset_handler = sas_eh_device_reset_handler, .eh_bus_reset_handler = sas_eh_bus_reset_handler, - .slave_alloc = sas_slave_alloc, .target_destroy = sas_target_destroy, .ioctl = sas_ioctl, .shost_attrs = mvst_host_attrs, diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c index bd165ea6191..36efaa7c3a5 100644 --- a/drivers/scsi/pm8001/pm8001_init.c +++ b/drivers/scsi/pm8001/pm8001_init.c @@ -75,7 +75,6 @@ static struct scsi_host_template pm8001_sht = { .use_clustering = ENABLE_CLUSTERING, .eh_device_reset_handler = sas_eh_device_reset_handler, .eh_bus_reset_handler = sas_eh_bus_reset_handler, - .slave_alloc = sas_slave_alloc, .target_destroy = sas_target_destroy, .ioctl = sas_ioctl, .shost_attrs = pm8001_host_attrs, diff --git a/include/linux/libata.h b/include/linux/libata.h index aa427047756..42378d637ff 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -996,6 +996,7 @@ extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev, extern void ata_sas_port_destroy(struct ata_port *); extern struct ata_port *ata_sas_port_alloc(struct ata_host *, struct ata_port_info *, struct Scsi_Host *); +extern int ata_sas_async_port_init(struct ata_port *); extern int ata_sas_port_init(struct ata_port *); extern int ata_sas_port_start(struct ata_port *ap); extern void ata_sas_port_stop(struct ata_port *ap); diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 4a42be34fad..20153d58e4e 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -646,7 +646,6 @@ int sas_phy_reset(struct sas_phy *phy, int hard_reset); int sas_queue_up(struct sas_task *task); extern int sas_queuecommand(struct Scsi_Host * ,struct scsi_cmnd *); extern int sas_target_alloc(struct scsi_target *); -extern int sas_slave_alloc(struct scsi_device *); extern int sas_slave_configure(struct scsi_device *); extern int sas_change_queue_depth(struct scsi_device *, int new_depth, int reason); diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h index 1556eff4cc4..cdccd2eb7b6 100644 --- a/include/scsi/sas_ata.h +++ b/include/scsi/sas_ata.h @@ -37,15 +37,14 @@ static inline int dev_is_sata(struct domain_device *dev) } int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy); -int sas_ata_init_host_and_port(struct domain_device *found_dev, - struct scsi_target *starget); - +int sas_ata_init_host_and_port(struct domain_device *found_dev); void sas_ata_task_abort(struct sas_task *task); void sas_ata_strategy_handler(struct Scsi_Host *shost); void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, struct list_head *done_q); void sas_ata_schedule_reset(struct domain_device *dev); void sas_ata_wait_eh(struct domain_device *dev); +void sas_probe_sata(struct asd_sas_port *port); #else @@ -53,8 +52,7 @@ static inline int dev_is_sata(struct domain_device *dev) { return 0; } -static inline int sas_ata_init_host_and_port(struct domain_device *found_dev, - struct scsi_target *starget) +static inline int sas_ata_init_host_and_port(struct domain_device *found_dev) { return 0; } @@ -79,6 +77,10 @@ static inline void sas_ata_wait_eh(struct domain_device *dev) { } +static inline void sas_probe_sata(struct asd_sas_port *port) +{ +} + static inline int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy) { return 0; -- cgit v1.2.3-70-g09d2 From 840234745edaa82d514420dc1086e63536493a51 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 20 Jan 2012 15:23:07 -0800 Subject: [SCSI] libsas: fix lifetime of SAS_HA_FROZEN Until all sas_tasks are known to no longer be in-flight this flag gates late completions from colliding with error handling. However, it must be cleared prior to the submission of scsi_send_eh_cmnd() requests, otherwise those commands will never be completed correctly. This was spotted by slub debug: ============================================================================= BUG sas_task: Objects remaining on kmem_cache_close() ----------------------------------------------------------------------------- INFO: Slab 0xffffea001f0eba00 objects=34 used=1 fp=0xffff8807c3aecb00 flags=0x8000000000004080 Pid: 22919, comm: modprobe Not tainted 3.2.0-isci+ #2 Call Trace: [] slab_err+0xb0/0xd2 [] ? free_percpu+0x31/0x117 [] ? kzalloc+0x14/0x16 [] ? kzalloc+0x14/0x16 [] kmem_cache_destroy+0x11d/0x270 [] sas_class_exit+0x10/0x12 [libsas] [] sys_delete_module+0x1c4/0x23c [] ? sysret_check+0x2e/0x69 [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] system_call_fastpath+0x16/0x1b INFO: Object 0xffff8807c3aed280 @offset=21120 INFO: Allocated in sas_alloc_task+0x22/0x90 [libsas] age=4615311 cpu=2 pid=12966 __slab_alloc.clone.3+0x1d1/0x234 kmem_cache_alloc+0x52/0x10d sas_alloc_task+0x22/0x90 [libsas] sas_queuecommand+0x20e/0x230 [libsas] scsi_send_eh_cmnd+0xd1/0x30c scsi_eh_try_stu+0x4f/0x6b scsi_eh_ready_devs+0xba/0x6ef sas_scsi_recover_host+0xa35/0xab1 [libsas] scsi_error_handler+0x14b/0x5fa kthread+0x9d/0xa5 kernel_thread_helper+0x4/0x10 Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_scsi_host.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 3701ff7e726..fd3291337c1 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -521,8 +521,7 @@ try_bus_reset: return FAILED; } -static int sas_eh_handle_sas_errors(struct Scsi_Host *shost, - struct list_head *work_q) +static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head *work_q) { struct scsi_cmnd *cmd, *n; enum task_disposition res = TASK_IS_DONE; @@ -658,7 +657,7 @@ static int sas_eh_handle_sas_errors(struct Scsi_Host *shost, out: list_splice_tail(&done, work_q); list_splice_tail_init(&ha->eh_ata_q, work_q); - return list_empty(work_q); + return; clear_q: SAS_DPRINTK("--- Exit %s -- clear_q\n", __func__); @@ -682,10 +681,13 @@ void sas_scsi_recover_host(struct Scsi_Host *shost) __func__, shost->host_busy, shost->host_failed); /* * Deal with commands that still have SAS tasks (i.e. they didn't - * complete via the normal sas_task completion mechanism) + * complete via the normal sas_task completion mechanism), + * SAS_HA_FROZEN gives eh dominion over all sas_task completion. */ set_bit(SAS_HA_FROZEN, &ha->state); - if (sas_eh_handle_sas_errors(shost, &eh_work_q)) + sas_eh_handle_sas_errors(shost, &eh_work_q); + clear_bit(SAS_HA_FROZEN, &ha->state); + if (list_empty(&eh_work_q)) goto out; /* @@ -699,7 +701,6 @@ void sas_scsi_recover_host(struct Scsi_Host *shost) scsi_eh_ready_devs(shost, &eh_work_q, &ha->eh_done_q); out: - clear_bit(SAS_HA_FROZEN, &ha->state); if (ha->lldd_max_execute_num > 1) wake_up_process(ha->core.queue_thread); -- cgit v1.2.3-70-g09d2 From 9a10b33caf78f897356ac006c455e6060a40af15 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 20 Jan 2012 15:26:03 -0800 Subject: [SCSI] libsas: revert ata srst libata issues follow up srsts when the controller has a hard time recording the signature-fis after a reset, or if the link supports port multipliers. libsas does not support port multipliers and no current libsas lldds appear to need help retrieving the signature fis. Revert it for now to remove confusion. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 38 -------------------------------------- include/scsi/libsas.h | 1 - 2 files changed, 39 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index eb8b77c8616..08d2103a45b 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -443,43 +443,6 @@ static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, return ret; } -static int sas_ata_soft_reset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - struct domain_device *dev = ap->private_data; - struct sas_internal *i = dev_to_sas_internal(dev); - int res = TMF_RESP_FUNC_FAILED; - int ret = 0; - - if (i->dft->lldd_ata_soft_reset) - res = i->dft->lldd_ata_soft_reset(dev); - - if (res != TMF_RESP_FUNC_COMPLETE) { - SAS_DPRINTK("%s: Unable to soft reset\n", __func__); - ret = -EAGAIN; - } - - switch (dev->sata_dev.command_set) { - case ATA_COMMAND_SET: - SAS_DPRINTK("%s: Found ATA device.\n", __func__); - *class = ATA_DEV_ATA; - break; - case ATAPI_COMMAND_SET: - SAS_DPRINTK("%s: Found ATAPI device.\n", __func__); - *class = ATA_DEV_ATAPI; - break; - default: - SAS_DPRINTK("%s: Unknown SATA command set: %d.\n", - __func__, dev->sata_dev.command_set); - *class = ATA_DEV_UNKNOWN; - break; - } - - ap->cbl = ATA_CBL_SATA; - return ret; -} - /* * notify the lldd to forget the sas_task for this internal ata command * that bypasses scsi-eh @@ -563,7 +526,6 @@ static void sas_ata_set_dmamode(struct ata_port *ap, struct ata_device *ata_dev) static struct ata_port_operations sas_sata_ops = { .prereset = ata_std_prereset, - .softreset = sas_ata_soft_reset, .hardreset = sas_ata_hard_reset, .postreset = ata_std_postreset, .error_handler = ata_std_error_handler, diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 20153d58e4e..5f5ed1b8b41 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -619,7 +619,6 @@ struct sas_domain_function_template { int (*lldd_clear_aca)(struct domain_device *, u8 *lun); int (*lldd_clear_task_set)(struct domain_device *, u8 *lun); int (*lldd_I_T_nexus_reset)(struct domain_device *); - int (*lldd_ata_soft_reset)(struct domain_device *); int (*lldd_ata_check_ready)(struct domain_device *); void (*lldd_ata_set_dmamode)(struct domain_device *); int (*lldd_lu_reset)(struct domain_device *, u8 *lun); -- cgit v1.2.3-70-g09d2 From 899fcf40f3177697ccfb029d0484cb8ec09a51ca Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sat, 28 Jan 2012 17:24:40 -0800 Subject: [SCSI] libsas: set attached device type and target protocols for local phys Before: $ cat /sys/class/sas_phy/phy-6\:3/device_type none $ cat /sys/class/sas_phy/phy-6\:3/target_port_protocols none After: $ cat /sys/class/sas_phy/phy-6\:3/device_type end device $ cat /sys/class/sas_phy/phy-6\:3/target_port_protocols sata Also downgrade the phy_list_lock to _irq instead of _irqsave since libsas will never call sas_get_port_device with interrupts disbled. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_discover.c | 12 ++++++++---- drivers/scsi/libsas/sas_internal.h | 17 +++++++++++++++++ drivers/scsi/libsas/sas_port.c | 2 ++ 3 files changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 0d58a8beaa3..36467967560 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -69,7 +69,6 @@ void sas_init_dev(struct domain_device *dev) */ static int sas_get_port_device(struct asd_sas_port *port) { - unsigned long flags; struct asd_sas_phy *phy; struct sas_rphy *rphy; struct domain_device *dev; @@ -78,9 +77,9 @@ static int sas_get_port_device(struct asd_sas_port *port) if (!dev) return -ENOMEM; - spin_lock_irqsave(&port->phy_list_lock, flags); + spin_lock_irq(&port->phy_list_lock); if (list_empty(&port->phy_list)) { - spin_unlock_irqrestore(&port->phy_list_lock, flags); + spin_unlock_irq(&port->phy_list_lock); sas_put_device(dev); return -ENODEV; } @@ -89,7 +88,7 @@ static int sas_get_port_device(struct asd_sas_port *port) memcpy(dev->frame_rcvd, phy->frame_rcvd, min(sizeof(dev->frame_rcvd), (size_t)phy->frame_rcvd_size)); spin_unlock(&phy->frame_rcvd_lock); - spin_unlock_irqrestore(&port->phy_list_lock, flags); + spin_unlock_irq(&port->phy_list_lock); if (dev->frame_rcvd[0] == 0x34 && port->oob_mode == SATA_OOB_MODE) { struct dev_to_host_fis *fis = @@ -134,6 +133,11 @@ static int sas_get_port_device(struct asd_sas_port *port) sas_put_device(dev); return -ENODEV; } + + spin_lock_irq(&port->phy_list_lock); + list_for_each_entry(phy, &port->phy_list, port_phy_el) + sas_phy_set_target(phy, dev); + spin_unlock_irq(&port->phy_list_lock); rphy->identify.phy_identifier = phy->phy->identify.phy_identifier; memcpy(dev->sas_addr, port->attached_sas_addr, SAS_ADDR_SIZE); sas_fill_in_rphy(dev, rphy); diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index d0d9bf10f79..f05c6387994 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -30,6 +30,7 @@ #include #include #include +#include #define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__) @@ -147,6 +148,22 @@ static inline void sas_fill_in_rphy(struct domain_device *dev, } } +static inline void sas_phy_set_target(struct asd_sas_phy *p, struct domain_device *dev) +{ + struct sas_phy *phy = p->phy; + + if (dev) { + if (dev_is_sata(dev)) + phy->identify.device_type = SAS_END_DEVICE; + else + phy->identify.device_type = dev->dev_type; + phy->identify.target_port_protocols = dev->tproto; + } else { + phy->identify.device_type = SAS_PHY_UNUSED; + phy->identify.target_port_protocols = 0; + } +} + static inline void sas_add_parent_port(struct domain_device *dev, int phy_id) { struct expander_device *ex = &dev->ex_dev; diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index 29f8fd33552..eb19c016d50 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -104,6 +104,7 @@ static void sas_form_port(struct asd_sas_phy *phy) /* add the phy to the port */ list_add_tail(&phy->port_phy_el, &port->phy_list); + sas_phy_set_target(phy, port->port_dev); phy->port = port; port->num_phys++; port->phy_mask |= (1U << phy->id); @@ -182,6 +183,7 @@ void sas_deform_port(struct asd_sas_phy *phy, int gone) spin_lock(&port->phy_list_lock); list_del_init(&phy->port_phy_el); + sas_phy_set_target(phy, NULL); phy->port = NULL; port->num_phys--; port->phy_mask &= ~(1U << phy->id); -- cgit v1.2.3-70-g09d2 From 77c309f3cdf9e217032dfe330f5881d352bb0436 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 8 Feb 2012 23:20:41 -0800 Subject: [SCSI] libsas: fixup target_port_protocols for expanders that don't report sata If discovery returns 0 for target_port_protocols but shows an attached sata device, just report SAS_PROTOCOL_SATA in the identify data so userspace can reliably search for sata devices in the domain. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_expander.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 14e3244c1b2..05acd9e35fc 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -251,6 +251,8 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) phy->phy->identify.device_type = dr->attached_dev_type; phy->phy->identify.initiator_port_protocols = phy->attached_iproto; phy->phy->identify.target_port_protocols = phy->attached_tproto; + if (!phy->attached_tproto && dr->attached_sata_dev) + phy->phy->identify.target_port_protocols = SAS_PROTOCOL_SATA; phy->phy->identify.phy_identifier = phy_id; phy->phy->minimum_linkrate_hw = dr->hmin_linkrate; phy->phy->maximum_linkrate_hw = dr->hmax_linkrate; -- cgit v1.2.3-70-g09d2 From 26a2e68f816ebd736a0484ca293457b280af4ef1 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 30 Jan 2012 21:40:45 -0800 Subject: [SCSI] libsas: don't recover end devices attached to disabled phys If userspace has decided to disable a phy the kernel should honor that and not inadvertantly re-enable the phy via error recovery. This is more straightforward in the sata case where link recovery (via libata-eh) is separate from sas_task cancelling in libsas-eh. Teach libsas to accept -ENODEV as a successful response from I_T_nexus_reset ('successful' in terms of not escalating further). This is a more comprehensive fix then "libsas: don't recover 'gone' devices in sas_ata_hard_reset()", as it is no longer sata-specific. aic94xx does check the return value from sas_phy_reset() so if the phy is disabled we proceed with clearing the I_T_nexus. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/aic94xx/aic94xx_tmf.c | 2 +- drivers/scsi/libsas/sas_ata.c | 5 ++--- drivers/scsi/libsas/sas_init.c | 3 +++ drivers/scsi/libsas/sas_scsi_host.c | 3 ++- 4 files changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c index 50b914ffab9..cf9040933da 100644 --- a/drivers/scsi/aic94xx/aic94xx_tmf.c +++ b/drivers/scsi/aic94xx/aic94xx_tmf.c @@ -192,7 +192,7 @@ int asd_I_T_nexus_reset(struct domain_device *dev) ASD_DPRINTK("sending %s reset to %s\n", reset_type ? "hard" : "soft", dev_name(&phy->dev)); res = sas_phy_reset(phy, reset_type); - if (res == TMF_RESP_FUNC_COMPLETE) { + if (res == TMF_RESP_FUNC_COMPLETE || res == -ENODEV) { /* wait for the maximum settle time */ msleep(500); /* clear all outstanding commands (keep nexus suspended) */ diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 08d2103a45b..bc0cecc6ad6 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -407,10 +407,9 @@ static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, struct domain_device *dev = ap->private_data; struct sas_internal *i = dev_to_sas_internal(dev); - if (test_bit(SAS_DEV_GONE, &dev->state)) - return -ENODEV; - res = i->dft->lldd_I_T_nexus_reset(dev); + if (res == -ENODEV) + return res; if (res != TMF_RESP_FUNC_COMPLETE) sas_ata_printk(KERN_DEBUG, dev, "Unable to reset ata device?\n"); diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index 09c14ca3fbd..120bff64be3 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -298,6 +298,9 @@ int sas_phy_reset(struct sas_phy *phy, int hard_reset) int ret; enum phy_func reset_type; + if (!phy->enabled) + return -ENODEV; + if (hard_reset) reset_type = PHY_FUNC_HARD_RESET; else diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index fd3291337c1..f0b9b7bf188 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -607,7 +607,8 @@ static void sas_eh_handle_sas_errors(struct Scsi_Host *shost, struct list_head * SAS_DPRINTK("task 0x%p is not at LU: I_T recover\n", task); tmf_resp = sas_recover_I_T(task->dev); - if (tmf_resp == TMF_RESP_FUNC_COMPLETE) { + if (tmf_resp == TMF_RESP_FUNC_COMPLETE || + tmf_resp == -ENODEV) { struct domain_device *dev = task->dev; SAS_DPRINTK("I_T %016llx recovered\n", SAS_ADDR(task->dev->sas_addr)); -- cgit v1.2.3-70-g09d2 From 16d3db1b298529e6aec4a4cf0f56225d9e0bc641 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 30 Jan 2012 22:53:51 -0800 Subject: [SCSI] scsi_transport_sas: 'enable' phys on reset If userspace requests a phy reset, treat that as a request for the phy to be enabled since that is the effect on hardware. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_sas.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 7d69a25d200..f7565fc4f0e 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -615,6 +615,7 @@ do_sas_phy_reset(struct device *dev, size_t count, int hard_reset) error = i->f->phy_reset(phy, hard_reset); if (error) return error; + phy->enabled = 1; return count; }; -- cgit v1.2.3-70-g09d2 From d7a0ccdd9bd78b5b74d2963ec7ab67c9d896902a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 10 Feb 2012 01:18:44 -0800 Subject: [SCSI] isci: debug, provide state-enum-to-string conversions Debugging the driver requires tracing the state transtions and tracing state names is less work than decoding numbers. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/phy.c | 34 +++-- drivers/scsi/isci/phy.h | 154 +++++++++------------- drivers/scsi/isci/port.c | 46 ++++--- drivers/scsi/isci/port.h | 103 ++++++--------- drivers/scsi/isci/remote_device.c | 50 +++++--- drivers/scsi/isci/remote_device.h | 205 ++++++++++++++---------------- drivers/scsi/isci/remote_node_context.c | 19 ++- drivers/scsi/isci/remote_node_context.h | 97 +++++++------- drivers/scsi/isci/request.c | 25 ++-- drivers/scsi/isci/request.h | 219 ++++++++++++++------------------ 10 files changed, 432 insertions(+), 520 deletions(-) diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 8d412ca689a..87064f13f8f 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -59,6 +59,16 @@ #include "scu_event_codes.h" #include "probe_roms.h" +#undef C +#define C(a) (#a) +static const char *phy_state_name(enum sci_phy_states state) +{ + static const char * const strings[] = PHY_STATES; + + return strings[state]; +} +#undef C + /* Maximum arbitration wait time in micro-seconds */ #define SCIC_SDS_PHY_MAX_ARBITRATION_WAIT_TIME (700) @@ -454,8 +464,8 @@ enum sci_status sci_phy_start(struct isci_phy *iphy) enum sci_phy_states state = iphy->sm.current_state_id; if (state != SCI_PHY_STOPPED) { - dev_dbg(sciphy_to_dev(iphy), - "%s: in wrong state: %d\n", __func__, state); + dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n", + __func__, phy_state_name(state)); return SCI_FAILURE_INVALID_STATE; } @@ -480,8 +490,8 @@ enum sci_status sci_phy_stop(struct isci_phy *iphy) case SCI_PHY_READY: break; default: - dev_dbg(sciphy_to_dev(iphy), - "%s: in wrong state: %d\n", __func__, state); + dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n", + __func__, phy_state_name(state)); return SCI_FAILURE_INVALID_STATE; } @@ -494,8 +504,8 @@ enum sci_status sci_phy_reset(struct isci_phy *iphy) enum sci_phy_states state = iphy->sm.current_state_id; if (state != SCI_PHY_READY) { - dev_dbg(sciphy_to_dev(iphy), - "%s: in wrong state: %d\n", __func__, state); + dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n", + __func__, phy_state_name(state)); return SCI_FAILURE_INVALID_STATE; } @@ -544,8 +554,8 @@ enum sci_status sci_phy_consume_power_handler(struct isci_phy *iphy) return SCI_SUCCESS; } default: - dev_dbg(sciphy_to_dev(iphy), - "%s: in wrong state: %d\n", __func__, state); + dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n", + __func__, phy_state_name(state)); return SCI_FAILURE_INVALID_STATE; } } @@ -870,8 +880,8 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code) } return SCI_SUCCESS; default: - dev_dbg(sciphy_to_dev(iphy), - "%s: in wrong state: %d\n", __func__, state); + dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n", + __func__, phy_state_name(state)); return SCI_FAILURE_INVALID_STATE; } } @@ -964,8 +974,8 @@ enum sci_status sci_phy_frame_handler(struct isci_phy *iphy, u32 frame_index) return result; } default: - dev_dbg(sciphy_to_dev(iphy), - "%s: in wrong state: %d\n", __func__, state); + dev_dbg(sciphy_to_dev(iphy), "%s: in wrong state: %s\n", + __func__, phy_state_name(state)); return SCI_FAILURE_INVALID_STATE; } diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h index a5e1a9e577b..0e45833ba06 100644 --- a/drivers/scsi/isci/phy.h +++ b/drivers/scsi/isci/phy.h @@ -343,101 +343,65 @@ enum sci_phy_counter_id { SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR }; -enum sci_phy_states { - /** - * Simply the initial state for the base domain state machine. - */ - SCI_PHY_INITIAL, - - /** - * This state indicates that the phy has successfully been stopped. - * In this state no new IO operations are permitted on this phy. - * This state is entered from the INITIAL state. - * This state is entered from the STARTING state. - * This state is entered from the READY state. - * This state is entered from the RESETTING state. - */ - SCI_PHY_STOPPED, - - /** - * This state indicates that the phy is in the process of becomming - * ready. In this state no new IO operations are permitted on this phy. - * This state is entered from the STOPPED state. - * This state is entered from the READY state. - * This state is entered from the RESETTING state. - */ - SCI_PHY_STARTING, - - /** - * Initial state - */ - SCI_PHY_SUB_INITIAL, - - /** - * Wait state for the hardware OSSP event type notification - */ - SCI_PHY_SUB_AWAIT_OSSP_EN, - - /** - * Wait state for the PHY speed notification - */ - SCI_PHY_SUB_AWAIT_SAS_SPEED_EN, - - /** - * Wait state for the IAF Unsolicited frame notification - */ - SCI_PHY_SUB_AWAIT_IAF_UF, - - /** - * Wait state for the request to consume power - */ - SCI_PHY_SUB_AWAIT_SAS_POWER, - - /** - * Wait state for request to consume power - */ - SCI_PHY_SUB_AWAIT_SATA_POWER, - - /** - * Wait state for the SATA PHY notification - */ - SCI_PHY_SUB_AWAIT_SATA_PHY_EN, - - /** - * Wait for the SATA PHY speed notification - */ - SCI_PHY_SUB_AWAIT_SATA_SPEED_EN, - - /** - * Wait state for the SIGNATURE FIS unsolicited frame notification - */ - SCI_PHY_SUB_AWAIT_SIG_FIS_UF, - - /** - * Exit state for this state machine - */ - SCI_PHY_SUB_FINAL, - - /** - * This state indicates the the phy is now ready. Thus, the user - * is able to perform IO operations utilizing this phy as long as it - * is currently part of a valid port. - * This state is entered from the STARTING state. - */ - SCI_PHY_READY, - - /** - * This state indicates that the phy is in the process of being reset. - * In this state no new IO operations are permitted on this phy. - * This state is entered from the READY state. - */ - SCI_PHY_RESETTING, - - /** - * Simply the final state for the base phy state machine. - */ - SCI_PHY_FINAL, -}; +/** + * enum sci_phy_states - phy state machine states + * @SCI_PHY_INITIAL: Simply the initial state for the base domain state + * machine. + * @SCI_PHY_STOPPED: phy has successfully been stopped. In this state + * no new IO operations are permitted on this phy. + * @SCI_PHY_STARTING: the phy is in the process of becomming ready. In + * this state no new IO operations are permitted on + * this phy. + * @SCI_PHY_SUB_INITIAL: Initial state + * @SCI_PHY_SUB_AWAIT_OSSP_EN: Wait state for the hardware OSSP event + * type notification + * @SCI_PHY_SUB_AWAIT_SAS_SPEED_EN: Wait state for the PHY speed + * notification + * @SCI_PHY_SUB_AWAIT_IAF_UF: Wait state for the IAF Unsolicited frame + * notification + * @SCI_PHY_SUB_AWAIT_SAS_POWER: Wait state for the request to consume + * power + * @SCI_PHY_SUB_AWAIT_SATA_POWER: Wait state for request to consume + * power + * @SCI_PHY_SUB_AWAIT_SATA_PHY_EN: Wait state for the SATA PHY + * notification + * @SCI_PHY_SUB_AWAIT_SATA_SPEED_EN: Wait for the SATA PHY speed + * notification + * @SCI_PHY_SUB_AWAIT_SIG_FIS_UF: Wait state for the SIGNATURE FIS + * unsolicited frame notification + * @SCI_PHY_SUB_FINAL: Exit state for this state machine + * @SCI_PHY_READY: phy is now ready. Thus, the user is able to perform + * IO operations utilizing this phy as long as it is + * currently part of a valid port. This state is + * entered from the STARTING state. + * @SCI_PHY_RESETTING: phy is in the process of being reset. In this + * state no new IO operations are permitted on this + * phy. This state is entered from the READY state. + * @SCI_PHY_FINAL: Simply the final state for the base phy state + * machine. + */ +#define PHY_STATES {\ + C(PHY_INITIAL),\ + C(PHY_STOPPED),\ + C(PHY_STARTING),\ + C(PHY_SUB_INITIAL),\ + C(PHY_SUB_AWAIT_OSSP_EN),\ + C(PHY_SUB_AWAIT_SAS_SPEED_EN),\ + C(PHY_SUB_AWAIT_IAF_UF),\ + C(PHY_SUB_AWAIT_SAS_POWER),\ + C(PHY_SUB_AWAIT_SATA_POWER),\ + C(PHY_SUB_AWAIT_SATA_PHY_EN),\ + C(PHY_SUB_AWAIT_SATA_SPEED_EN),\ + C(PHY_SUB_AWAIT_SIG_FIS_UF),\ + C(PHY_SUB_FINAL),\ + C(PHY_READY),\ + C(PHY_RESETTING),\ + C(PHY_FINAL),\ + } +#undef C +#define C(a) SCI_##a +enum sci_phy_states PHY_STATES; +#undef C void sci_phy_construct( struct isci_phy *iphy, diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index c5ae94dbef4..5fada73b71f 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -60,6 +60,16 @@ #define SCIC_SDS_PORT_HARD_RESET_TIMEOUT (1000) #define SCU_DUMMY_INDEX (0xFFFF) +#undef C +#define C(a) (#a) +const char *port_state_name(enum sci_port_states state) +{ + static const char * const strings[] = PORT_STATES; + + return strings[state]; +} +#undef C + static struct device *sciport_to_dev(struct isci_port *iport) { int i = iport->physical_port_index; @@ -1054,8 +1064,8 @@ enum sci_status sci_port_start(struct isci_port *iport) state = iport->sm.current_state_id; if (state != SCI_PORT_STOPPED) { - dev_warn(sciport_to_dev(iport), - "%s: in wrong state: %d\n", __func__, state); + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n", + __func__, port_state_name(state)); return SCI_FAILURE_INVALID_STATE; } @@ -1129,8 +1139,8 @@ enum sci_status sci_port_stop(struct isci_port *iport) SCI_PORT_STOPPING); return SCI_SUCCESS; default: - dev_warn(sciport_to_dev(iport), - "%s: in wrong state: %d\n", __func__, state); + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n", + __func__, port_state_name(state)); return SCI_FAILURE_INVALID_STATE; } } @@ -1144,8 +1154,8 @@ static enum sci_status sci_port_hard_reset(struct isci_port *iport, u32 timeout) state = iport->sm.current_state_id; if (state != SCI_PORT_SUB_OPERATIONAL) { - dev_warn(sciport_to_dev(iport), - "%s: in wrong state: %d\n", __func__, state); + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n", + __func__, port_state_name(state)); return SCI_FAILURE_INVALID_STATE; } @@ -1239,8 +1249,8 @@ enum sci_status sci_port_add_phy(struct isci_port *iport, SCI_PORT_SUB_CONFIGURING); return SCI_SUCCESS; default: - dev_warn(sciport_to_dev(iport), - "%s: in wrong state: %d\n", __func__, state); + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n", + __func__, port_state_name(state)); return SCI_FAILURE_INVALID_STATE; } } @@ -1289,8 +1299,8 @@ enum sci_status sci_port_remove_phy(struct isci_port *iport, SCI_PORT_SUB_CONFIGURING); return SCI_SUCCESS; default: - dev_warn(sciport_to_dev(iport), - "%s: in wrong state: %d\n", __func__, state); + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n", + __func__, port_state_name(state)); return SCI_FAILURE_INVALID_STATE; } } @@ -1332,8 +1342,8 @@ enum sci_status sci_port_link_up(struct isci_port *iport, sci_port_general_link_up_handler(iport, iphy, PF_RESUME); return SCI_SUCCESS; default: - dev_warn(sciport_to_dev(iport), - "%s: in wrong state: %d\n", __func__, state); + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n", + __func__, port_state_name(state)); return SCI_FAILURE_INVALID_STATE; } } @@ -1362,8 +1372,8 @@ enum sci_status sci_port_link_down(struct isci_port *iport, sci_port_deactivate_phy(iport, iphy, false); return SCI_SUCCESS; default: - dev_warn(sciport_to_dev(iport), - "%s: in wrong state: %d\n", __func__, state); + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n", + __func__, port_state_name(state)); return SCI_FAILURE_INVALID_STATE; } } @@ -1382,8 +1392,8 @@ enum sci_status sci_port_start_io(struct isci_port *iport, iport->started_request_count++; return SCI_SUCCESS; default: - dev_warn(sciport_to_dev(iport), - "%s: in wrong state: %d\n", __func__, state); + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n", + __func__, port_state_name(state)); return SCI_FAILURE_INVALID_STATE; } } @@ -1397,8 +1407,8 @@ enum sci_status sci_port_complete_io(struct isci_port *iport, state = iport->sm.current_state_id; switch (state) { case SCI_PORT_STOPPED: - dev_warn(sciport_to_dev(iport), - "%s: in wrong state: %d\n", __func__, state); + dev_warn(sciport_to_dev(iport), "%s: in wrong state: %s\n", + __func__, port_state_name(state)); return SCI_FAILURE_INVALID_STATE; case SCI_PORT_STOPPING: sci_port_decrement_request_count(iport); diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 321b987d582..6b56240c205 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -144,70 +144,47 @@ struct sci_port_properties { }; /** - * enum sci_port_states - This enumeration depicts all the states for the - * common port state machine. - * - * + * enum sci_port_states - port state machine states + * @SCI_PORT_STOPPED: port has successfully been stopped. In this state + * no new IO operations are permitted. This state is + * entered from the STOPPING state. + * @SCI_PORT_STOPPING: port is in the process of stopping. In this + * state no new IO operations are permitted, but + * existing IO operations are allowed to complete. + * This state is entered from the READY state. + * @SCI_PORT_READY: port is now ready. Thus, the user is able to + * perform IO operations on this port. This state is + * entered from the STARTING state. + * @SCI_PORT_SUB_WAITING: port is started and ready but has no active + * phys. + * @SCI_PORT_SUB_OPERATIONAL: port is started and ready and there is at + * least one phy operational. + * @SCI_PORT_SUB_CONFIGURING: port is started and there was an + * add/remove phy event. This state is only + * used in Automatic Port Configuration Mode + * (APC) + * @SCI_PORT_RESETTING: port is in the process of performing a hard + * reset. Thus, the user is unable to perform IO + * operations on this port. This state is entered + * from the READY state. + * @SCI_PORT_FAILED: port has failed a reset request. This state is + * entered when a port reset request times out. This + * state is entered from the RESETTING state. */ -enum sci_port_states { - /** - * This state indicates that the port has successfully been stopped. - * In this state no new IO operations are permitted. - * This state is entered from the STOPPING state. - */ - SCI_PORT_STOPPED, - - /** - * This state indicates that the port is in the process of stopping. - * In this state no new IO operations are permitted, but existing IO - * operations are allowed to complete. - * This state is entered from the READY state. - */ - SCI_PORT_STOPPING, - - /** - * This state indicates the port is now ready. Thus, the user is - * able to perform IO operations on this port. - * This state is entered from the STARTING state. - */ - SCI_PORT_READY, - - /** - * The substate where the port is started and ready but has no - * active phys. - */ - SCI_PORT_SUB_WAITING, - - /** - * The substate where the port is started and ready and there is - * at least one phy operational. - */ - SCI_PORT_SUB_OPERATIONAL, - - /** - * The substate where the port is started and there was an - * add/remove phy event. This state is only used in Automatic - * Port Configuration Mode (APC) - */ - SCI_PORT_SUB_CONFIGURING, - - /** - * This state indicates the port is in the process of performing a hard - * reset. Thus, the user is unable to perform IO operations on this - * port. - * This state is entered from the READY state. - */ - SCI_PORT_RESETTING, - - /** - * This state indicates the port has failed a reset request. This state - * is entered when a port reset request times out. - * This state is entered from the RESETTING state. - */ - SCI_PORT_FAILED, - - -}; +#define PORT_STATES {\ + C(PORT_STOPPED),\ + C(PORT_STOPPING),\ + C(PORT_READY),\ + C(PORT_SUB_WAITING),\ + C(PORT_SUB_OPERATIONAL),\ + C(PORT_SUB_CONFIGURING),\ + C(PORT_RESETTING),\ + C(PORT_FAILED),\ + } +#undef C +#define C(a) SCI_##a +enum sci_port_states PORT_STATES; +#undef C static inline void sci_port_decrement_request_count(struct isci_port *iport) { diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 934d21ea14e..8f501b0a81d 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -62,6 +62,16 @@ #include "scu_event_codes.h" #include "task.h" +#undef C +#define C(a) (#a) +const char *dev_state_name(enum sci_remote_device_states state) +{ + static const char * const strings[] = REMOTE_DEV_STATES; + + return strings[state]; +} +#undef C + /** * isci_remote_device_not_ready() - This function is called by the ihost when * the remote device is not ready. We mark the isci device as ready (not @@ -167,8 +177,8 @@ enum sci_status sci_remote_device_stop(struct isci_remote_device *idev, case SCI_DEV_FAILED: case SCI_DEV_FINAL: default: - dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", - __func__, state); + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n", + __func__, dev_state_name(state)); return SCI_FAILURE_INVALID_STATE; case SCI_DEV_STOPPED: return SCI_SUCCESS; @@ -226,8 +236,8 @@ enum sci_status sci_remote_device_reset(struct isci_remote_device *idev) case SCI_DEV_RESETTING: case SCI_DEV_FINAL: default: - dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", - __func__, state); + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n", + __func__, dev_state_name(state)); return SCI_FAILURE_INVALID_STATE; case SCI_DEV_READY: case SCI_STP_DEV_IDLE: @@ -246,8 +256,8 @@ enum sci_status sci_remote_device_reset_complete(struct isci_remote_device *idev enum sci_remote_device_states state = sm->current_state_id; if (state != SCI_DEV_RESETTING) { - dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", - __func__, state); + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n", + __func__, dev_state_name(state)); return SCI_FAILURE_INVALID_STATE; } @@ -262,8 +272,8 @@ enum sci_status sci_remote_device_suspend(struct isci_remote_device *idev, enum sci_remote_device_states state = sm->current_state_id; if (state != SCI_STP_DEV_CMD) { - dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", - __func__, state); + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n", + __func__, dev_state_name(state)); return SCI_FAILURE_INVALID_STATE; } @@ -287,8 +297,8 @@ enum sci_status sci_remote_device_frame_handler(struct isci_remote_device *idev, case SCI_SMP_DEV_IDLE: case SCI_DEV_FINAL: default: - dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", - __func__, state); + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n", + __func__, dev_state_name(state)); /* Return the frame back to the controller */ sci_controller_release_frame(ihost, frame_index); return SCI_FAILURE_INVALID_STATE; @@ -502,8 +512,8 @@ enum sci_status sci_remote_device_start_io(struct isci_host *ihost, case SCI_DEV_RESETTING: case SCI_DEV_FINAL: default: - dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", - __func__, state); + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n", + __func__, dev_state_name(state)); return SCI_FAILURE_INVALID_STATE; case SCI_DEV_READY: /* attempt to start an io request for this device object. The remote @@ -637,8 +647,8 @@ enum sci_status sci_remote_device_complete_io(struct isci_host *ihost, case SCI_DEV_FAILED: case SCI_DEV_FINAL: default: - dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", - __func__, state); + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n", + __func__, dev_state_name(state)); return SCI_FAILURE_INVALID_STATE; case SCI_DEV_READY: case SCI_STP_DEV_AWAIT_RESET: @@ -721,8 +731,8 @@ enum sci_status sci_remote_device_start_task(struct isci_host *ihost, case SCI_DEV_RESETTING: case SCI_DEV_FINAL: default: - dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", - __func__, state); + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n", + __func__, dev_state_name(state)); return SCI_FAILURE_INVALID_STATE; case SCI_STP_DEV_IDLE: case SCI_STP_DEV_CMD: @@ -853,8 +863,8 @@ static enum sci_status sci_remote_device_destruct(struct isci_remote_device *ide struct isci_host *ihost; if (state != SCI_DEV_STOPPED) { - dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", - __func__, state); + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n", + __func__, dev_state_name(state)); return SCI_FAILURE_INVALID_STATE; } @@ -1204,8 +1214,8 @@ static enum sci_status sci_remote_device_start(struct isci_remote_device *idev, enum sci_status status; if (state != SCI_DEV_STOPPED) { - dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %d\n", - __func__, state); + dev_warn(scirdev_to_dev(idev), "%s: in wrong state: %s\n", + __func__, dev_state_name(state)); return SCI_FAILURE_INVALID_STATE; } diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index 98c2801ed08..58637ee08f5 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -179,122 +179,101 @@ enum sci_status sci_remote_device_reset_complete( /** * enum sci_remote_device_states - This enumeration depicts all the states * for the common remote device state machine. + * @SCI_DEV_INITIAL: Simply the initial state for the base remote device + * state machine. * + * @SCI_DEV_STOPPED: This state indicates that the remote device has + * successfully been stopped. In this state no new IO operations are + * permitted. This state is entered from the INITIAL state. This state + * is entered from the STOPPING state. * + * @SCI_DEV_STARTING: This state indicates the the remote device is in + * the process of becoming ready (i.e. starting). In this state no new + * IO operations are permitted. This state is entered from the STOPPED + * state. + * + * @SCI_DEV_READY: This state indicates the remote device is now ready. + * Thus, the user is able to perform IO operations on the remote device. + * This state is entered from the STARTING state. + * + * @SCI_STP_DEV_IDLE: This is the idle substate for the stp remote + * device. When there are no active IO for the device it is is in this + * state. + * + * @SCI_STP_DEV_CMD: This is the command state for for the STP remote + * device. This state is entered when the device is processing a + * non-NCQ command. The device object will fail any new start IO + * requests until this command is complete. + * + * @SCI_STP_DEV_NCQ: This is the NCQ state for the STP remote device. + * This state is entered when the device is processing an NCQ reuqest. + * It will remain in this state so long as there is one or more NCQ + * requests being processed. + * + * @SCI_STP_DEV_NCQ_ERROR: This is the NCQ error state for the STP + * remote device. This state is entered when an SDB error FIS is + * received by the device object while in the NCQ state. The device + * object will only accept a READ LOG command while in this state. + * + * @SCI_STP_DEV_ATAPI_ERROR: This is the ATAPI error state for the STP + * ATAPI remote device. This state is entered when ATAPI device sends + * error status FIS without data while the device object is in CMD + * state. A suspension event is expected in this state. The device + * object will resume right away. + * + * @SCI_STP_DEV_AWAIT_RESET: This is the READY substate indicates the + * device is waiting for the RESET task coming to be recovered from + * certain hardware specific error. + * + * @SCI_SMP_DEV_IDLE: This is the ready operational substate for the + * remote device. This is the normal operational state for a remote + * device. + * + * @SCI_SMP_DEV_CMD: This is the suspended state for the remote device. + * This is the state that the device is placed in when a RNC suspend is + * received by the SCU hardware. + * + * @SCI_DEV_STOPPING: This state indicates that the remote device is in + * the process of stopping. In this state no new IO operations are + * permitted, but existing IO operations are allowed to complete. This + * state is entered from the READY state. This state is entered from + * the FAILED state. + * + * @SCI_DEV_FAILED: This state indicates that the remote device has + * failed. In this state no new IO operations are permitted. This + * state is entered from the INITIALIZING state. This state is entered + * from the READY state. + * + * @SCI_DEV_RESETTING: This state indicates the device is being reset. + * In this state no new IO operations are permitted. This state is + * entered from the READY state. + * + * @SCI_DEV_FINAL: Simply the final state for the base remote device + * state machine. */ -enum sci_remote_device_states { - /** - * Simply the initial state for the base remote device state machine. - */ - SCI_DEV_INITIAL, - - /** - * This state indicates that the remote device has successfully been - * stopped. In this state no new IO operations are permitted. - * This state is entered from the INITIAL state. - * This state is entered from the STOPPING state. - */ - SCI_DEV_STOPPED, - - /** - * This state indicates the the remote device is in the process of - * becoming ready (i.e. starting). In this state no new IO operations - * are permitted. - * This state is entered from the STOPPED state. - */ - SCI_DEV_STARTING, - - /** - * This state indicates the remote device is now ready. Thus, the user - * is able to perform IO operations on the remote device. - * This state is entered from the STARTING state. - */ - SCI_DEV_READY, - - /** - * This is the idle substate for the stp remote device. When there are no - * active IO for the device it is is in this state. - */ - SCI_STP_DEV_IDLE, - - /** - * This is the command state for for the STP remote device. This state is - * entered when the device is processing a non-NCQ command. The device object - * will fail any new start IO requests until this command is complete. - */ - SCI_STP_DEV_CMD, - - /** - * This is the NCQ state for the STP remote device. This state is entered - * when the device is processing an NCQ reuqest. It will remain in this state - * so long as there is one or more NCQ requests being processed. - */ - SCI_STP_DEV_NCQ, - - /** - * This is the NCQ error state for the STP remote device. This state is - * entered when an SDB error FIS is received by the device object while in the - * NCQ state. The device object will only accept a READ LOG command while in - * this state. - */ - SCI_STP_DEV_NCQ_ERROR, - - /** - * This is the ATAPI error state for the STP ATAPI remote device. - * This state is entered when ATAPI device sends error status FIS - * without data while the device object is in CMD state. - * A suspension event is expected in this state. - * The device object will resume right away. - */ - SCI_STP_DEV_ATAPI_ERROR, - - /** - * This is the READY substate indicates the device is waiting for the RESET task - * coming to be recovered from certain hardware specific error. - */ - SCI_STP_DEV_AWAIT_RESET, - - /** - * This is the ready operational substate for the remote device. This is the - * normal operational state for a remote device. - */ - SCI_SMP_DEV_IDLE, - - /** - * This is the suspended state for the remote device. This is the state that - * the device is placed in when a RNC suspend is received by the SCU hardware. - */ - SCI_SMP_DEV_CMD, - - /** - * This state indicates that the remote device is in the process of - * stopping. In this state no new IO operations are permitted, but - * existing IO operations are allowed to complete. - * This state is entered from the READY state. - * This state is entered from the FAILED state. - */ - SCI_DEV_STOPPING, - - /** - * This state indicates that the remote device has failed. - * In this state no new IO operations are permitted. - * This state is entered from the INITIALIZING state. - * This state is entered from the READY state. - */ - SCI_DEV_FAILED, - - /** - * This state indicates the device is being reset. - * In this state no new IO operations are permitted. - * This state is entered from the READY state. - */ - SCI_DEV_RESETTING, - - /** - * Simply the final state for the base remote device state machine. - */ - SCI_DEV_FINAL, -}; +#define REMOTE_DEV_STATES {\ + C(DEV_INITIAL),\ + C(DEV_STOPPED),\ + C(DEV_STARTING),\ + C(DEV_READY),\ + C(STP_DEV_IDLE),\ + C(STP_DEV_CMD),\ + C(STP_DEV_NCQ),\ + C(STP_DEV_NCQ_ERROR),\ + C(STP_DEV_ATAPI_ERROR),\ + C(STP_DEV_AWAIT_RESET),\ + C(SMP_DEV_IDLE),\ + C(SMP_DEV_CMD),\ + C(DEV_STOPPING),\ + C(DEV_FAILED),\ + C(DEV_RESETTING),\ + C(DEV_FINAL),\ + } +#undef C +#define C(a) SCI_##a +enum sci_remote_device_states REMOTE_DEV_STATES; +#undef C +const char *dev_state_name(enum sci_remote_device_states state); static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_context *rnc) { diff --git a/drivers/scsi/isci/remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index 748e8339d1e..3a9463481f3 100644 --- a/drivers/scsi/isci/remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -60,18 +60,15 @@ #include "scu_event_codes.h" #include "scu_task_context.h" +#undef C +#define C(a) (#a) +const char *rnc_state_name(enum scis_sds_remote_node_context_states state) +{ + static const char * const strings[] = RNC_STATES; -/** - * - * @sci_rnc: The RNC for which the is posted request is being made. - * - * This method will return true if the RNC is not in the initial state. In all - * other states the RNC is considered active and this will return true. The - * destroy request of the state machine drives the RNC back to the initial - * state. If the state machine changes then this routine will also have to be - * changed. bool true if the state machine is not in the initial state false if - * the state machine is in the initial state - */ + return strings[state]; +} +#undef C /** * diff --git a/drivers/scsi/isci/remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index 41580ad1252..a241e0f4c86 100644 --- a/drivers/scsi/isci/remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h @@ -85,61 +85,50 @@ struct sci_remote_node_context; typedef void (*scics_sds_remote_node_context_callback)(void *); /** - * This is the enumeration of the remote node context states. + * enum sci_remote_node_context_states + * @SCI_RNC_INITIAL initial state for a remote node context. On a resume + * request the remote node context will transition to the posting state. + * + * @SCI_RNC_POSTING: transition state that posts the RNi to the hardware. Once + * the RNC is posted the remote node context will be made ready. + * + * @SCI_RNC_INVALIDATING: transition state that will post an RNC invalidate to + * the hardware. Once the invalidate is complete the remote node context will + * transition to the posting state. + * + * @SCI_RNC_RESUMING: transition state that will post an RNC resume to the + * hardare. Once the event notification of resume complete is received the + * remote node context will transition to the ready state. + * + * @SCI_RNC_READY: state that the remote node context must be in to accept io + * request operations. + * + * @SCI_RNC_TX_SUSPENDED: state that the remote node context transitions to when + * it gets a TX suspend notification from the hardware. + * + * @SCI_RNC_TX_RX_SUSPENDED: state that the remote node context transitions to + * when it gets a TX RX suspend notification from the hardware. + * + * @SCI_RNC_AWAIT_SUSPENSION: wait state for the remote node context that waits + * for a suspend notification from the hardware. This state is entered when + * either there is a request to supend the remote node context or when there is + * a TC completion where the remote node will be suspended by the hardware. */ -enum scis_sds_remote_node_context_states { - /** - * This state is the initial state for a remote node context. On a resume - * request the remote node context will transition to the posting state. - */ - SCI_RNC_INITIAL, - - /** - * This is a transition state that posts the RNi to the hardware. Once the RNC - * is posted the remote node context will be made ready. - */ - SCI_RNC_POSTING, - - /** - * This is a transition state that will post an RNC invalidate to the - * hardware. Once the invalidate is complete the remote node context will - * transition to the posting state. - */ - SCI_RNC_INVALIDATING, - - /** - * This is a transition state that will post an RNC resume to the hardare. - * Once the event notification of resume complete is received the remote node - * context will transition to the ready state. - */ - SCI_RNC_RESUMING, - - /** - * This is the state that the remote node context must be in to accept io - * request operations. - */ - SCI_RNC_READY, - - /** - * This is the state that the remote node context transitions to when it gets - * a TX suspend notification from the hardware. - */ - SCI_RNC_TX_SUSPENDED, - - /** - * This is the state that the remote node context transitions to when it gets - * a TX RX suspend notification from the hardware. - */ - SCI_RNC_TX_RX_SUSPENDED, - - /** - * This state is a wait state for the remote node context that waits for a - * suspend notification from the hardware. This state is entered when either - * there is a request to supend the remote node context or when there is a TC - * completion where the remote node will be suspended by the hardware. - */ - SCI_RNC_AWAIT_SUSPENSION -}; +#define RNC_STATES {\ + C(RNC_INITIAL),\ + C(RNC_POSTING),\ + C(RNC_INVALIDATING),\ + C(RNC_RESUMING),\ + C(RNC_READY),\ + C(RNC_TX_SUSPENDED),\ + C(RNC_TX_RX_SUSPENDED),\ + C(RNC_AWAIT_SUSPENSION),\ + } +#undef C +#define C(a) SCI_##a +enum scis_sds_remote_node_context_states RNC_STATES; +#undef C +const char *rnc_state_name(enum scis_sds_remote_node_context_states state); /** * diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 1a39ce50529..ab18ee0fe24 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -61,6 +61,16 @@ #include "scu_event_codes.h" #include "sas.h" +#undef C +#define C(a) (#a) +const char *req_state_name(enum sci_base_request_states state) +{ + static const char * const strings[] = REQUEST_STATES; + + return strings[state]; +} +#undef C + static struct scu_sgl_element_pair *to_sgl_element_pair(struct isci_request *ireq, int idx) { @@ -910,7 +920,8 @@ enum sci_status sci_request_complete(struct isci_request *ireq) state = ireq->sm.current_state_id; if (WARN_ONCE(state != SCI_REQ_COMPLETED, - "isci: request completion from wrong state (%d)\n", state)) + "isci: request completion from wrong state (%s)\n", + req_state_name(state))) return SCI_FAILURE_INVALID_STATE; if (ireq->saved_rx_frame_index != SCU_INVALID_FRAME_INDEX) @@ -931,8 +942,8 @@ enum sci_status sci_io_request_event_handler(struct isci_request *ireq, state = ireq->sm.current_state_id; if (state != SCI_REQ_STP_PIO_DATA_IN) { - dev_warn(&ihost->pdev->dev, "%s: (%x) in wrong state %d\n", - __func__, event_code, state); + dev_warn(&ihost->pdev->dev, "%s: (%x) in wrong state %s\n", + __func__, event_code, req_state_name(state)); return SCI_FAILURE_INVALID_STATE; } @@ -2306,12 +2317,8 @@ sci_io_request_tc_completion(struct isci_request *ireq, return atapi_data_tc_completion_handler(ireq, completion_code); default: - dev_warn(&ihost->pdev->dev, - "%s: SCIC IO Request given task completion " - "notification %x while in wrong state %d\n", - __func__, - completion_code, - state); + dev_warn(&ihost->pdev->dev, "%s: %x in wrong state %s\n", + __func__, completion_code, req_state_name(state)); return SCI_FAILURE_INVALID_STATE; } } diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index bcf2f37f23e..057f2378452 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -182,134 +182,103 @@ static inline struct isci_request *to_ireq(struct isci_stp_request *stp_req) } /** - * enum sci_base_request_states - This enumeration depicts all the states for - * the common request state machine. + * enum sci_base_request_states - request state machine states * + * @SCI_REQ_INIT: Simply the initial state for the base request state machine. * + * @SCI_REQ_CONSTRUCTED: This state indicates that the request has been + * constructed. This state is entered from the INITIAL state. + * + * @SCI_REQ_STARTED: This state indicates that the request has been started. + * This state is entered from the CONSTRUCTED state. + * + * @SCI_REQ_STP_UDMA_WAIT_TC_COMP: + * @SCI_REQ_STP_UDMA_WAIT_D2H: + * @SCI_REQ_STP_NON_DATA_WAIT_H2D: + * @SCI_REQ_STP_NON_DATA_WAIT_D2H: + * + * @SCI_REQ_STP_PIO_WAIT_H2D: While in this state the IO request object is + * waiting for the TC completion notification for the H2D Register FIS + * + * @SCI_REQ_STP_PIO_WAIT_FRAME: While in this state the IO request object is + * waiting for either a PIO Setup FIS or a D2H register FIS. The type of frame + * received is based on the result of the prior frame and line conditions. + * + * @SCI_REQ_STP_PIO_DATA_IN: While in this state the IO request object is + * waiting for a DATA frame from the device. + * + * @SCI_REQ_STP_PIO_DATA_OUT: While in this state the IO request object is + * waiting to transmit the next data frame to the device. + * + * @SCI_REQ_ATAPI_WAIT_H2D: While in this state the IO request object is + * waiting for the TC completion notification for the H2D Register FIS + * + * @SCI_REQ_ATAPI_WAIT_PIO_SETUP: While in this state the IO request object is + * waiting for either a PIO Setup. + * + * @SCI_REQ_ATAPI_WAIT_D2H: The non-data IO transit to this state in this state + * after receiving TC completion. While in this state IO request object is + * waiting for D2H status frame as UF. + * + * @SCI_REQ_ATAPI_WAIT_TC_COMP: When transmitting raw frames hardware reports + * task context completion after every frame submission, so in the + * non-accelerated case we need to expect the completion for the "cdb" frame. + * + * @SCI_REQ_TASK_WAIT_TC_COMP: The AWAIT_TC_COMPLETION sub-state indicates that + * the started raw task management request is waiting for the transmission of + * the initial frame (i.e. command, task, etc.). + * + * @SCI_REQ_TASK_WAIT_TC_RESP: This sub-state indicates that the started task + * management request is waiting for the reception of an unsolicited frame + * (i.e. response IU). + * + * @SCI_REQ_SMP_WAIT_RESP: This sub-state indicates that the started task + * management request is waiting for the reception of an unsolicited frame + * (i.e. response IU). + * + * @SCI_REQ_SMP_WAIT_TC_COMP: The AWAIT_TC_COMPLETION sub-state indicates that + * the started SMP request is waiting for the transmission of the initial frame + * (i.e. command, task, etc.). + * + * @SCI_REQ_COMPLETED: This state indicates that the request has completed. + * This state is entered from the STARTED state. This state is entered from the + * ABORTING state. + * + * @SCI_REQ_ABORTING: This state indicates that the request is in the process + * of being terminated/aborted. This state is entered from the CONSTRUCTED + * state. This state is entered from the STARTED state. + * + * @SCI_REQ_FINAL: Simply the final state for the base request state machine. */ -enum sci_base_request_states { - /* - * Simply the initial state for the base request state machine. - */ - SCI_REQ_INIT, - - /* - * This state indicates that the request has been constructed. - * This state is entered from the INITIAL state. - */ - SCI_REQ_CONSTRUCTED, - - /* - * This state indicates that the request has been started. This state - * is entered from the CONSTRUCTED state. - */ - SCI_REQ_STARTED, - - SCI_REQ_STP_UDMA_WAIT_TC_COMP, - SCI_REQ_STP_UDMA_WAIT_D2H, - - SCI_REQ_STP_NON_DATA_WAIT_H2D, - SCI_REQ_STP_NON_DATA_WAIT_D2H, - - /* - * While in this state the IO request object is waiting for the TC - * completion notification for the H2D Register FIS - */ - SCI_REQ_STP_PIO_WAIT_H2D, - - /* - * While in this state the IO request object is waiting for either a - * PIO Setup FIS or a D2H register FIS. The type of frame received is - * based on the result of the prior frame and line conditions. - */ - SCI_REQ_STP_PIO_WAIT_FRAME, - - /* - * While in this state the IO request object is waiting for a DATA - * frame from the device. - */ - SCI_REQ_STP_PIO_DATA_IN, - - /* - * While in this state the IO request object is waiting to transmit - * the next data frame to the device. - */ - SCI_REQ_STP_PIO_DATA_OUT, - - /* - * While in this state the IO request object is waiting for the TC - * completion notification for the H2D Register FIS - */ - SCI_REQ_ATAPI_WAIT_H2D, - - /* - * While in this state the IO request object is waiting for either a - * PIO Setup. - */ - SCI_REQ_ATAPI_WAIT_PIO_SETUP, - - /* - * The non-data IO transit to this state in this state after receiving - * TC completion. While in this state IO request object is waiting for - * D2H status frame as UF. - */ - SCI_REQ_ATAPI_WAIT_D2H, - - /* - * When transmitting raw frames hardware reports task context completion - * after every frame submission, so in the non-accelerated case we need - * to expect the completion for the "cdb" frame. - */ - SCI_REQ_ATAPI_WAIT_TC_COMP, - - /* - * The AWAIT_TC_COMPLETION sub-state indicates that the started raw - * task management request is waiting for the transmission of the - * initial frame (i.e. command, task, etc.). - */ - SCI_REQ_TASK_WAIT_TC_COMP, - - /* - * This sub-state indicates that the started task management request - * is waiting for the reception of an unsolicited frame - * (i.e. response IU). - */ - SCI_REQ_TASK_WAIT_TC_RESP, - - /* - * This sub-state indicates that the started task management request - * is waiting for the reception of an unsolicited frame - * (i.e. response IU). - */ - SCI_REQ_SMP_WAIT_RESP, - - /* - * The AWAIT_TC_COMPLETION sub-state indicates that the started SMP - * request is waiting for the transmission of the initial frame - * (i.e. command, task, etc.). - */ - SCI_REQ_SMP_WAIT_TC_COMP, - - /* - * This state indicates that the request has completed. - * This state is entered from the STARTED state. This state is entered - * from the ABORTING state. - */ - SCI_REQ_COMPLETED, - - /* - * This state indicates that the request is in the process of being - * terminated/aborted. - * This state is entered from the CONSTRUCTED state. - * This state is entered from the STARTED state. - */ - SCI_REQ_ABORTING, - - /* - * Simply the final state for the base request state machine. - */ - SCI_REQ_FINAL, -}; +#define REQUEST_STATES {\ + C(REQ_INIT),\ + C(REQ_CONSTRUCTED),\ + C(REQ_STARTED),\ + C(REQ_STP_UDMA_WAIT_TC_COMP),\ + C(REQ_STP_UDMA_WAIT_D2H),\ + C(REQ_STP_NON_DATA_WAIT_H2D),\ + C(REQ_STP_NON_DATA_WAIT_D2H),\ + C(REQ_STP_PIO_WAIT_H2D),\ + C(REQ_STP_PIO_WAIT_FRAME),\ + C(REQ_STP_PIO_DATA_IN),\ + C(REQ_STP_PIO_DATA_OUT),\ + C(REQ_ATAPI_WAIT_H2D),\ + C(REQ_ATAPI_WAIT_PIO_SETUP),\ + C(REQ_ATAPI_WAIT_D2H),\ + C(REQ_ATAPI_WAIT_TC_COMP),\ + C(REQ_TASK_WAIT_TC_COMP),\ + C(REQ_TASK_WAIT_TC_RESP),\ + C(REQ_SMP_WAIT_RESP),\ + C(REQ_SMP_WAIT_TC_COMP),\ + C(REQ_COMPLETED),\ + C(REQ_ABORTING),\ + C(REQ_FINAL),\ + } +#undef C +#define C(a) SCI_##a +enum sci_base_request_states REQUEST_STATES; +#undef C +const char *req_state_name(enum sci_base_request_states state); enum sci_status sci_request_start(struct isci_request *ireq); enum sci_status sci_io_request_terminate(struct isci_request *ireq); -- cgit v1.2.3-70-g09d2 From e462116afb1e436d4045167e7fe979405ae33d2b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 10 Feb 2012 01:18:49 -0800 Subject: [SCSI] isci: improve phy event warnings isci occasionally spews messages like: isci 0000:03:00.0: sci_phy_event_handler: PHY starting substate machine received unexpected event_code b3940000 ...which is not very helpful, since we don't know which controller, which phy, the exact state, or a decode of the event. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/phy.c | 123 ++++++++++++++++++++++++++++-------------------- 1 file changed, 71 insertions(+), 52 deletions(-) diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 87064f13f8f..fab3586840b 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -77,12 +77,17 @@ enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy) return iphy->max_negotiated_speed; } -static struct device *sciphy_to_dev(struct isci_phy *iphy) +static struct isci_host *phy_to_host(struct isci_phy *iphy) { struct isci_phy *table = iphy - iphy->phy_index; struct isci_host *ihost = container_of(table, typeof(*ihost), phys[0]); - return &ihost->pdev->dev; + return ihost; +} + +static struct device *sciphy_to_dev(struct isci_phy *iphy) +{ + return &phy_to_host(iphy)->pdev->dev; } static enum sci_status @@ -609,6 +614,60 @@ static void sci_phy_complete_link_training(struct isci_phy *iphy, sci_change_state(&iphy->sm, next_state); } +static const char *phy_event_name(u32 event_code) +{ + switch (scu_get_event_code(event_code)) { + case SCU_EVENT_PORT_SELECTOR_DETECTED: + return "port selector"; + case SCU_EVENT_SENT_PORT_SELECTION: + return "port selection"; + case SCU_EVENT_HARD_RESET_TRANSMITTED: + return "tx hard reset"; + case SCU_EVENT_HARD_RESET_RECEIVED: + return "rx hard reset"; + case SCU_EVENT_RECEIVED_IDENTIFY_TIMEOUT: + return "identify timeout"; + case SCU_EVENT_LINK_FAILURE: + return "link fail"; + case SCU_EVENT_SATA_SPINUP_HOLD: + return "sata spinup hold"; + case SCU_EVENT_SAS_15_SSC: + case SCU_EVENT_SAS_15: + return "sas 1.5"; + case SCU_EVENT_SAS_30_SSC: + case SCU_EVENT_SAS_30: + return "sas 3.0"; + case SCU_EVENT_SAS_60_SSC: + case SCU_EVENT_SAS_60: + return "sas 6.0"; + case SCU_EVENT_SATA_15_SSC: + case SCU_EVENT_SATA_15: + return "sata 1.5"; + case SCU_EVENT_SATA_30_SSC: + case SCU_EVENT_SATA_30: + return "sata 3.0"; + case SCU_EVENT_SATA_60_SSC: + case SCU_EVENT_SATA_60: + return "sata 6.0"; + case SCU_EVENT_SAS_PHY_DETECTED: + return "sas detect"; + case SCU_EVENT_SATA_PHY_DETECTED: + return "sata detect"; + default: + return "unknown"; + } +} + +#define phy_event_dbg(iphy, state, code) \ + dev_dbg(sciphy_to_dev(iphy), "phy-%d:%d: %s event: %s (%x)\n", \ + phy_to_host(iphy)->id, iphy->phy_index, \ + phy_state_name(state), phy_event_name(code), code) + +#define phy_event_warn(iphy, state, code) \ + dev_warn(sciphy_to_dev(iphy), "phy-%d:%d: %s event: %s (%x)\n", \ + phy_to_host(iphy)->id, iphy->phy_index, \ + phy_state_name(state), phy_event_name(code), code) + enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code) { enum sci_phy_states state = iphy->sm.current_state_id; @@ -625,11 +684,7 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code) iphy->is_in_link_training = true; break; default: - dev_dbg(sciphy_to_dev(iphy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); + phy_event_dbg(iphy, state, event_code); return SCI_FAILURE; } return SCI_SUCCESS; @@ -666,11 +721,7 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code) sci_change_state(&iphy->sm, SCI_PHY_STARTING); break; default: - dev_warn(sciphy_to_dev(iphy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, event_code); - + phy_event_warn(iphy, state, event_code); return SCI_FAILURE; break; } @@ -695,10 +746,7 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code) sci_change_state(&iphy->sm, SCI_PHY_STARTING); break; default: - dev_warn(sciphy_to_dev(iphy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, event_code); + phy_event_warn(iphy, state, event_code); return SCI_FAILURE; } return SCI_SUCCESS; @@ -709,11 +757,7 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code) sci_change_state(&iphy->sm, SCI_PHY_STARTING); break; default: - dev_warn(sciphy_to_dev(iphy), - "%s: PHY starting substate machine received unexpected " - "event_code %x\n", - __func__, - event_code); + phy_event_warn(iphy, state, event_code); return SCI_FAILURE; } return SCI_SUCCESS; @@ -737,11 +781,7 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code) break; default: - dev_warn(sciphy_to_dev(iphy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, event_code); - + phy_event_warn(iphy, state, event_code); return SCI_FAILURE; } return SCI_SUCCESS; @@ -769,12 +809,7 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code) sci_phy_start_sas_link_training(iphy); break; default: - dev_warn(sciphy_to_dev(iphy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - + phy_event_warn(iphy, state, event_code); return SCI_FAILURE; } return SCI_SUCCESS; @@ -811,11 +846,7 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code) sci_phy_start_sas_link_training(iphy); break; default: - dev_warn(sciphy_to_dev(iphy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, event_code); - + phy_event_warn(iphy, state, event_code); return SCI_FAILURE; } @@ -833,12 +864,7 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code) break; default: - dev_warn(sciphy_to_dev(iphy), - "%s: PHY starting substate machine received " - "unexpected event_code %x\n", - __func__, - event_code); - + phy_event_warn(iphy, state, event_code); return SCI_FAILURE; } return SCI_SUCCESS; @@ -856,10 +882,7 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code) iphy->bcn_received_while_port_unassigned = true; break; default: - dev_warn(sciphy_to_dev(iphy), - "%sP SCIC PHY 0x%p ready state machine received " - "unexpected event_code %x\n", - __func__, iphy, event_code); + phy_event_warn(iphy, state, event_code); return SCI_FAILURE_INVALID_STATE; } return SCI_SUCCESS; @@ -870,11 +893,7 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code) sci_change_state(&iphy->sm, SCI_PHY_STARTING); break; default: - dev_warn(sciphy_to_dev(iphy), - "%s: SCIC PHY 0x%p resetting state machine received " - "unexpected event_code %x\n", - __func__, iphy, event_code); - + phy_event_warn(iphy, state, event_code); return SCI_FAILURE_INVALID_STATE; break; } -- cgit v1.2.3-70-g09d2 From 13de2c541993394ec4db4949302312a0ce0af7b1 Mon Sep 17 00:00:00 2001 From: Andrzej Jakowski Date: Fri, 10 Feb 2012 01:18:54 -0800 Subject: [SCSI] isci: improvements in driver unloading routine This patch fixes scenario where driver removal should be possible only when driver is in READY state. Also it removes redundant invocation of routine disabling SCU interrupts - this method is called somewhere else in driver deinitialization path. Signed-off-by: Andrzej Jakowski Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/isci/init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index c9af456e7df..5137db5a5d8 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -60,6 +60,7 @@ #include #include #include +#include "host.h" #include "isci.h" #include "task.h" #include "probe_roms.h" @@ -552,9 +553,9 @@ static void __devexit isci_pci_remove(struct pci_dev *pdev) int i; for_each_isci_host(i, ihost, pdev) { + wait_for_start(ihost); isci_unregister(ihost); isci_host_deinit(ihost); - sci_controller_disable_interrupts(ihost); } } -- cgit v1.2.3-70-g09d2 From 8a6552299e2c3b01bb49ea52be2788f7c6bd8bf2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 21 Feb 2012 10:29:40 +0300 Subject: [SCSI] qla2xxx: handle default case in qla2x00_request_firmware() This silences a static checker warning. Also we're always adding new types of firmware, so it might fix a bug in real life some day. Signed-off-by: Dan Carpenter Acked-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 094af74989d..a2f999273a5 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -4058,7 +4058,6 @@ qla2x00_request_firmware(scsi_qla_host_t *vha) struct qla_hw_data *ha = vha->hw; struct fw_blob *blob; - blob = NULL; if (IS_QLA2100(ha)) { blob = &qla_fw_blobs[FW_ISP21XX]; } else if (IS_QLA2200(ha)) { @@ -4079,6 +4078,8 @@ qla2x00_request_firmware(scsi_qla_host_t *vha) blob = &qla_fw_blobs[FW_ISP2031]; } else if (IS_QLA8031(ha)) { blob = &qla_fw_blobs[FW_ISP8031]; + } else { + return NULL; } mutex_lock(&qla_fw_lock); -- cgit v1.2.3-70-g09d2 From cd9b3d04b4cae6bdfd639e603649777f819ed783 Mon Sep 17 00:00:00 2001 From: Wayne Boyer Date: Thu, 23 Feb 2012 11:54:55 -0800 Subject: [SCSI] ipr: update PCI ID definitions for new adapters This patch updates some PCI ID definitions for new adapters based on the next generation 64 bit IOA PCI interface chip. Signed-off-by: Wayne Boyer Acked-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ipr.c | 14 +++++++------- drivers/scsi/ipr.h | 4 ++-- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index b538f0883fd..cdfe5a16de2 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -183,7 +183,7 @@ static const struct ipr_chip_t ipr_chip[] = { { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, IPR_USE_LSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[1] }, { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, IPR_USE_LSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[1] }, { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2, IPR_USE_MSI, IPR_SIS64, IPR_MMIO, &ipr_chip_cfg[2] }, - { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2, IPR_USE_MSI, IPR_SIS64, IPR_MMIO, &ipr_chip_cfg[2] } + { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, IPR_USE_MSI, IPR_SIS64, IPR_MMIO, &ipr_chip_cfg[2] } }; static int ipr_max_bus_speeds [] = { @@ -9191,15 +9191,15 @@ static struct pci_device_id ipr_pci_table[] __devinitdata = { PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C3, 0, 0, 0 }, { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2, PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C4, 0, 0, 0 }, - { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2, + { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B4, 0, 0, 0 }, - { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2, + { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B1, 0, 0, 0 }, - { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2, + { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C6, 0, 0, 0 }, - { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2, - PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575D, 0, 0, 0 }, - { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2, + { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, + PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C8, 0, 0, 0 }, + { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57CE, 0, 0, 0 }, { } }; diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h index b13f9cc1227..f94eaee2ff1 100644 --- a/drivers/scsi/ipr.h +++ b/drivers/scsi/ipr.h @@ -58,7 +58,7 @@ #define PCI_DEVICE_ID_IBM_OBSIDIAN_E 0x0339 #define PCI_DEVICE_ID_IBM_CROC_FPGA_E2 0x033D -#define PCI_DEVICE_ID_IBM_CROC_ASIC_E2 0x034A +#define PCI_DEVICE_ID_IBM_CROCODILE 0x034A #define IPR_SUBS_DEV_ID_2780 0x0264 #define IPR_SUBS_DEV_ID_5702 0x0266 @@ -92,7 +92,7 @@ #define IPR_SUBS_DEV_ID_57B1 0x0355 #define IPR_SUBS_DEV_ID_574D 0x0356 -#define IPR_SUBS_DEV_ID_575D 0x035D +#define IPR_SUBS_DEV_ID_57C8 0x035D #define IPR_NAME "ipr" -- cgit v1.2.3-70-g09d2 From bdaefbf580cd200ae3230b6aacd1f4f2dadb18e3 Mon Sep 17 00:00:00 2001 From: Santosh Nayak Date: Sun, 26 Feb 2012 19:03:30 +0530 Subject: [SCSI] pm8001: Fix bogus interrupt state flag issue. Static checker is giving following warning: " error: calling 'spin_unlock_irqrestore()' with bogus flags" The code flow is as shown below: process_oq() --> process_one_iomb --> mpi_sata_completion In 'mpi_sata_completion' the first call for 'spin_unlock_irqrestore()' is with flags=0, which is as good as 'spin_unlock_irq()' ( unconditional interrupt enabling). So for better performance 'spin_unlock_irqrestore()' can be replaced with 'spin_unlock_irq()' and 'spin_lock_irqsave()' can be replaced by 'spin_lock_irq()'. Signed-off-by: Santosh Nayak Acked-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_hwi.c | 58 +++++++++++++++++++--------------------- 1 file changed, 28 insertions(+), 30 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 3920b49f4f5..871d1c3fa01 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -2082,7 +2082,6 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) { struct sas_task *t; struct pm8001_ccb_info *ccb; - unsigned long flags = 0; u32 param; u32 status; u32 tag; @@ -2221,9 +2220,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*in order to force CPU ordering*/ - spin_unlock_irqrestore(&pm8001_ha->lock, flags); + spin_unlock_irq(&pm8001_ha->lock); t->task_done(t); - spin_lock_irqsave(&pm8001_ha->lock, flags); + spin_lock_irq(&pm8001_ha->lock); return; } break; @@ -2241,9 +2240,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ - spin_unlock_irqrestore(&pm8001_ha->lock, flags); + spin_unlock_irq(&pm8001_ha->lock); t->task_done(t); - spin_lock_irqsave(&pm8001_ha->lock, flags); + spin_lock_irq(&pm8001_ha->lock); return; } break; @@ -2269,9 +2268,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/* ditto*/ - spin_unlock_irqrestore(&pm8001_ha->lock, flags); + spin_unlock_irq(&pm8001_ha->lock); t->task_done(t); - spin_lock_irqsave(&pm8001_ha->lock, flags); + spin_lock_irq(&pm8001_ha->lock); return; } break; @@ -2336,9 +2335,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ - spin_unlock_irqrestore(&pm8001_ha->lock, flags); + spin_unlock_irq(&pm8001_ha->lock); t->task_done(t); - spin_lock_irqsave(&pm8001_ha->lock, flags); + spin_lock_irq(&pm8001_ha->lock); return; } break; @@ -2360,9 +2359,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ - spin_unlock_irqrestore(&pm8001_ha->lock, flags); + spin_unlock_irq(&pm8001_ha->lock); t->task_done(t); - spin_lock_irqsave(&pm8001_ha->lock, flags); + spin_lock_irq(&pm8001_ha->lock); return; } break; @@ -2380,31 +2379,31 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) ts->stat = SAS_DEV_NO_RESPONSE; break; } - spin_lock_irqsave(&t->task_state_lock, flags); + spin_lock_irq(&t->task_state_lock); t->task_state_flags &= ~SAS_TASK_STATE_PENDING; t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; t->task_state_flags |= SAS_TASK_STATE_DONE; if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { - spin_unlock_irqrestore(&t->task_state_lock, flags); + spin_unlock_irq(&t->task_state_lock); PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with io_status 0x%x" " resp 0x%x stat 0x%x but aborted by upper layer!\n", t, status, ts->resp, ts->stat)); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); } else if (t->uldd_task) { - spin_unlock_irqrestore(&t->task_state_lock, flags); + spin_unlock_irq(&t->task_state_lock); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/* ditto */ - spin_unlock_irqrestore(&pm8001_ha->lock, flags); + spin_unlock_irq(&pm8001_ha->lock); t->task_done(t); - spin_lock_irqsave(&pm8001_ha->lock, flags); + spin_lock_irq(&pm8001_ha->lock); } else if (!t->uldd_task) { - spin_unlock_irqrestore(&t->task_state_lock, flags); + spin_unlock_irq(&t->task_state_lock); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ - spin_unlock_irqrestore(&pm8001_ha->lock, flags); + spin_unlock_irq(&pm8001_ha->lock); t->task_done(t); - spin_lock_irqsave(&pm8001_ha->lock, flags); + spin_lock_irq(&pm8001_ha->lock); } } @@ -2412,7 +2411,6 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) { struct sas_task *t; - unsigned long flags = 0; struct task_status_struct *ts; struct pm8001_ccb_info *ccb; struct pm8001_device *pm8001_dev; @@ -2492,9 +2490,9 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) ts->stat = SAS_QUEUE_FULL; pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ - spin_unlock_irqrestore(&pm8001_ha->lock, flags); + spin_unlock_irq(&pm8001_ha->lock); t->task_done(t); - spin_lock_irqsave(&pm8001_ha->lock, flags); + spin_lock_irq(&pm8001_ha->lock); return; } break; @@ -2592,31 +2590,31 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) ts->stat = SAS_OPEN_TO; break; } - spin_lock_irqsave(&t->task_state_lock, flags); + spin_lock_irq(&t->task_state_lock); t->task_state_flags &= ~SAS_TASK_STATE_PENDING; t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; t->task_state_flags |= SAS_TASK_STATE_DONE; if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { - spin_unlock_irqrestore(&t->task_state_lock, flags); + spin_unlock_irq(&t->task_state_lock); PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with io_status 0x%x" " resp 0x%x stat 0x%x but aborted by upper layer!\n", t, event, ts->resp, ts->stat)); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); } else if (t->uldd_task) { - spin_unlock_irqrestore(&t->task_state_lock, flags); + spin_unlock_irq(&t->task_state_lock); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/* ditto */ - spin_unlock_irqrestore(&pm8001_ha->lock, flags); + spin_unlock_irq(&pm8001_ha->lock); t->task_done(t); - spin_lock_irqsave(&pm8001_ha->lock, flags); + spin_lock_irq(&pm8001_ha->lock); } else if (!t->uldd_task) { - spin_unlock_irqrestore(&t->task_state_lock, flags); + spin_unlock_irq(&t->task_state_lock); pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb();/*ditto*/ - spin_unlock_irqrestore(&pm8001_ha->lock, flags); + spin_unlock_irq(&pm8001_ha->lock); t->task_done(t); - spin_lock_irqsave(&pm8001_ha->lock, flags); + spin_lock_irq(&pm8001_ha->lock); } } -- cgit v1.2.3-70-g09d2 From 50ec5babd3b9da274ac3e0d5ca0c4772e3c7bc8d Mon Sep 17 00:00:00 2001 From: Santosh Nayak Date: Sun, 26 Feb 2012 19:05:03 +0530 Subject: [SCSI] pm8001: Fix possible racing condition. There is a possble racing scenario. 'process_oq' is called by two routines, as shown below. pm8001_8001_dispatch = { ....... .isr = pm8001_chip_isr --> process_oq,// A .isr_process_oq = process_oq, // B ..... } process_oq() --> process_one_iomb() --> mpi_sata_completion() In 'mpi_sata_completion', "pm8001_ha->lock" is first released. It means lock is taken before, which is true for the context A, as 'pm8001_ha->lock' is taken in 'pm8001_chip_isr()' But for context B there is no lock taken before and pm8001_ha->lock is unlocked in 'mpi_sata_completion()'. This may unlock the lock taken in context A. Possible racing ?? If 'pm8001_ha->lock' is taken in 'process_oq()' instead of 'pm8001_chip_isr' then the above issue can be avoided. Signed-off-by: Santosh Nayak Acked-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_hwi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 871d1c3fa01..dc28ae18645 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -3869,7 +3869,9 @@ static int process_oq(struct pm8001_hba_info *pm8001_ha) void *pMsg1 = NULL; u8 bc = 0; u32 ret = MPI_IO_STATUS_FAIL; + unsigned long flags; + spin_lock_irqsave(&pm8001_ha->lock, flags); circularQ = &pm8001_ha->outbnd_q_tbl[0]; do { ret = mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc); @@ -3890,6 +3892,7 @@ static int process_oq(struct pm8001_hba_info *pm8001_ha) break; } } while (1); + spin_unlock_irqrestore(&pm8001_ha->lock, flags); return ret; } @@ -4295,12 +4298,9 @@ static u32 pm8001_chip_is_our_interupt(struct pm8001_hba_info *pm8001_ha) static irqreturn_t pm8001_chip_isr(struct pm8001_hba_info *pm8001_ha) { - unsigned long flags; - spin_lock_irqsave(&pm8001_ha->lock, flags); pm8001_chip_interrupt_disable(pm8001_ha); process_oq(pm8001_ha); pm8001_chip_interrupt_enable(pm8001_ha); - spin_unlock_irqrestore(&pm8001_ha->lock, flags); return IRQ_HANDLED; } -- cgit v1.2.3-70-g09d2 From 8270ee2abb78c73b73e04f2909b0de15540c9017 Mon Sep 17 00:00:00 2001 From: Santosh Nayak Date: Sun, 26 Feb 2012 20:14:46 +0530 Subject: [SCSI] pm8001: fix endian issue with code optimization. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 1. Fix endian issue. 2. Fix the following warning : " drivers/scsi/pm8001/pm8001_hwi.c:2932:32: warning: comparison between ‘enum sas_device_type’ and ‘enum sas_dev_type’". 3. Few code optimization. Signed-off-by: Santosh Nayak Acked-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_chips.h | 4 +- drivers/scsi/pm8001/pm8001_hwi.c | 89 ++++++++++++++++++++------------------ drivers/scsi/pm8001/pm8001_hwi.h | 2 +- 3 files changed, 49 insertions(+), 46 deletions(-) diff --git a/drivers/scsi/pm8001/pm8001_chips.h b/drivers/scsi/pm8001/pm8001_chips.h index 4efa4d0950e..9241c782603 100644 --- a/drivers/scsi/pm8001/pm8001_chips.h +++ b/drivers/scsi/pm8001/pm8001_chips.h @@ -46,9 +46,9 @@ static inline u32 pm8001_read_32(void *virt_addr) return *((u32 *)virt_addr); } -static inline void pm8001_write_32(void *addr, u32 offset, u32 val) +static inline void pm8001_write_32(void *addr, u32 offset, __le32 val) { - *((u32 *)(addr + offset)) = val; + *((__le32 *)(addr + offset)) = val; } static inline u32 pm8001_cr32(struct pm8001_hba_info *pm8001_ha, u32 bar, diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index dc28ae18645..5022bf7af3c 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -1246,7 +1246,7 @@ static int mpi_msg_free_get(struct inbound_queue_table *circularQ, consumer_index = pm8001_read_32(circularQ->ci_virt); circularQ->consumer_index = cpu_to_le32(consumer_index); if (((circularQ->producer_idx + bcCount) % 256) == - circularQ->consumer_index) { + le32_to_cpu(circularQ->consumer_index)) { *messagePtr = NULL; return -1; } @@ -1355,7 +1355,8 @@ static u32 mpi_msg_consume(struct pm8001_hba_info *pm8001_ha, u32 header_tmp; do { /* If there are not-yet-delivered messages ... */ - if (circularQ->producer_index != circularQ->consumer_idx) { + if (le32_to_cpu(circularQ->producer_index) + != circularQ->consumer_idx) { /*Get the pointer to the circular queue buffer element*/ msgHeader = (struct mpi_msg_hdr *) (circularQ->base_virt + @@ -1363,14 +1364,14 @@ static u32 mpi_msg_consume(struct pm8001_hba_info *pm8001_ha, /* read header */ header_tmp = pm8001_read_32(msgHeader); msgHeader_tmp = cpu_to_le32(header_tmp); - if (0 != (msgHeader_tmp & 0x80000000)) { + if (0 != (le32_to_cpu(msgHeader_tmp) & 0x80000000)) { if (OPC_OUB_SKIP_ENTRY != - (msgHeader_tmp & 0xfff)) { + (le32_to_cpu(msgHeader_tmp) & 0xfff)) { *messagePtr1 = ((u8 *)msgHeader) + sizeof(struct mpi_msg_hdr); - *pBC = (u8)((msgHeader_tmp >> 24) & - 0x1f); + *pBC = (u8)((le32_to_cpu(msgHeader_tmp) + >> 24) & 0x1f); PM8001_IO_DBG(pm8001_ha, pm8001_printk(": CI=%d PI=%d " "msgHeader=%x\n", @@ -1381,8 +1382,8 @@ static u32 mpi_msg_consume(struct pm8001_hba_info *pm8001_ha, } else { circularQ->consumer_idx = (circularQ->consumer_idx + - ((msgHeader_tmp >> 24) & 0x1f)) - % 256; + ((le32_to_cpu(msgHeader_tmp) + >> 24) & 0x1f)) % 256; msgHeader_tmp = 0; pm8001_write_32(msgHeader, 0, 0); /* update the CI of outbound queue */ @@ -1394,7 +1395,8 @@ static u32 mpi_msg_consume(struct pm8001_hba_info *pm8001_ha, } else { circularQ->consumer_idx = (circularQ->consumer_idx + - ((msgHeader_tmp >> 24) & 0x1f)) % 256; + ((le32_to_cpu(msgHeader_tmp) >> 24) & + 0x1f)) % 256; msgHeader_tmp = 0; pm8001_write_32(msgHeader, 0, 0); /* update the CI of outbound queue */ @@ -1410,7 +1412,8 @@ static u32 mpi_msg_consume(struct pm8001_hba_info *pm8001_ha, producer_index = pm8001_read_32(pi_virt); circularQ->producer_index = cpu_to_le32(producer_index); } - } while (circularQ->producer_index != circularQ->consumer_idx); + } while (le32_to_cpu(circularQ->producer_index) != + circularQ->consumer_idx); /* while we don't have any more not-yet-delivered message */ /* report empty */ return MPI_IO_STATUS_BUSY; @@ -3060,7 +3063,7 @@ static void pm8001_hw_event_ack_req(struct pm8001_hba_info *pm8001_ha, memset((u8 *)&payload, 0, sizeof(payload)); circularQ = &pm8001_ha->inbnd_q_tbl[Qnum]; - payload.tag = 1; + payload.tag = cpu_to_le32(1); payload.sea_phyid_portid = cpu_to_le32(((SEA & 0xFFFF) << 8) | ((phyId & 0x0F) << 4) | (port_id & 0x0F)); payload.param0 = cpu_to_le32(param0); @@ -3132,9 +3135,9 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) phy->phy_type |= PORT_TYPE_SAS; phy->identify.device_type = deviceType; phy->phy_attached = 1; - if (phy->identify.device_type == SAS_END_DEV) + if (phy->identify.device_type == SAS_END_DEVICE) phy->identify.target_port_protocols = SAS_PROTOCOL_SSP; - else if (phy->identify.device_type != NO_DEVICE) + else if (phy->identify.device_type != SAS_PHY_UNUSED) phy->identify.target_port_protocols = SAS_PROTOCOL_SMP; phy->sas_phy.oob_mode = SAS_OOB_MODE; sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE); @@ -3278,7 +3281,7 @@ static int mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) (struct dev_reg_resp *)(piomb + 4); htag = le32_to_cpu(registerRespPayload->tag); - ccb = &pm8001_ha->ccb_info[registerRespPayload->tag]; + ccb = &pm8001_ha->ccb_info[htag]; pm8001_dev = ccb->device; status = le32_to_cpu(registerRespPayload->status); device_id = le32_to_cpu(registerRespPayload->device_id); @@ -3352,7 +3355,7 @@ mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) struct fw_control_ex fw_control_context; struct fw_flash_Update_resp *ppayload = (struct fw_flash_Update_resp *)(piomb + 4); - u32 tag = le32_to_cpu(ppayload->tag); + u32 tag = ppayload->tag; struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag]; status = le32_to_cpu(ppayload->status); memcpy(&fw_control_context, @@ -3441,13 +3444,12 @@ mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) struct task_abort_resp *pPayload = (struct task_abort_resp *)(piomb + 4); - ccb = &pm8001_ha->ccb_info[pPayload->tag]; - t = ccb->task; - status = le32_to_cpu(pPayload->status); tag = le32_to_cpu(pPayload->tag); scp = le32_to_cpu(pPayload->scp); + ccb = &pm8001_ha->ccb_info[tag]; + t = ccb->task; PM8001_IO_DBG(pm8001_ha, pm8001_printk(" status = 0x%x\n", status)); if (t == NULL) @@ -3473,7 +3475,7 @@ mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; t->task_state_flags |= SAS_TASK_STATE_DONE; spin_unlock_irqrestore(&t->task_state_lock, flags); - pm8001_ccb_task_free(pm8001_ha, t, ccb, pPayload->tag); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); mb(); t->task_done(t); return 0; @@ -3700,7 +3702,7 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb) static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb) { u32 pHeader = (u32)*(u32 *)piomb; - u8 opc = (u8)((le32_to_cpu(pHeader)) & 0xFFF); + u8 opc = (u8)(pHeader & 0xFFF); PM8001_MSG_DBG(pm8001_ha, pm8001_printk("process_one_iomb:")); @@ -3867,7 +3869,7 @@ static int process_oq(struct pm8001_hba_info *pm8001_ha) { struct outbound_queue_table *circularQ; void *pMsg1 = NULL; - u8 bc = 0; + u8 uninitialized_var(bc); u32 ret = MPI_IO_STATUS_FAIL; unsigned long flags; @@ -3882,11 +3884,10 @@ static int process_oq(struct pm8001_hba_info *pm8001_ha) mpi_msg_free_set(pm8001_ha, pMsg1, circularQ, bc); } if (MPI_IO_STATUS_BUSY == ret) { - u32 producer_idx; /* Update the producer index from SPC */ - producer_idx = pm8001_read_32(circularQ->pi_virt); - circularQ->producer_index = cpu_to_le32(producer_idx); - if (circularQ->producer_index == + circularQ->producer_index = + cpu_to_le32(pm8001_read_32(circularQ->pi_virt)); + if (le32_to_cpu(circularQ->producer_index) == circularQ->consumer_idx) /* OQ is empty */ break; @@ -3918,9 +3919,9 @@ pm8001_chip_make_sg(struct scatterlist *scatter, int nr, void *prd) } } -static void build_smp_cmd(u32 deviceID, u32 hTag, struct smp_req *psmp_cmd) +static void build_smp_cmd(u32 deviceID, __le32 hTag, struct smp_req *psmp_cmd) { - psmp_cmd->tag = cpu_to_le32(hTag); + psmp_cmd->tag = hTag; psmp_cmd->device_id = cpu_to_le32(deviceID); psmp_cmd->len_ip_ir = cpu_to_le32(1|(1 << 1)); } @@ -4004,7 +4005,7 @@ static int pm8001_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha, struct ssp_ini_io_start_req ssp_cmd; u32 tag = ccb->ccb_tag; int ret; - __le64 phys_addr; + u64 phys_addr; struct inbound_queue_table *circularQ; u32 opc = OPC_INB_SSPINIIOSTART; memset(&ssp_cmd, 0, sizeof(ssp_cmd)); @@ -4025,15 +4026,15 @@ static int pm8001_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha, /* fill in PRD (scatter/gather) table, if any */ if (task->num_scatter > 1) { pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd); - phys_addr = cpu_to_le64(ccb->ccb_dma_handle + - offsetof(struct pm8001_ccb_info, buf_prd[0])); - ssp_cmd.addr_low = lower_32_bits(phys_addr); - ssp_cmd.addr_high = upper_32_bits(phys_addr); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info, buf_prd[0]); + ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(phys_addr)); + ssp_cmd.addr_high = cpu_to_le32(upper_32_bits(phys_addr)); ssp_cmd.esgl = cpu_to_le32(1<<31); } else if (task->num_scatter == 1) { - __le64 dma_addr = cpu_to_le64(sg_dma_address(task->scatter)); - ssp_cmd.addr_low = lower_32_bits(dma_addr); - ssp_cmd.addr_high = upper_32_bits(dma_addr); + u64 dma_addr = sg_dma_address(task->scatter); + ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(dma_addr)); + ssp_cmd.addr_high = cpu_to_le32(upper_32_bits(dma_addr)); ssp_cmd.len = cpu_to_le32(task->total_xfer_len); ssp_cmd.esgl = 0; } else if (task->num_scatter == 0) { @@ -4056,7 +4057,7 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha, int ret; struct sata_start_req sata_cmd; u32 hdr_tag, ncg_tag = 0; - __le64 phys_addr; + u64 phys_addr; u32 ATAP = 0x0; u32 dir; struct inbound_queue_table *circularQ; @@ -4095,13 +4096,13 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha, /* fill in PRD (scatter/gather) table, if any */ if (task->num_scatter > 1) { pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd); - phys_addr = cpu_to_le64(ccb->ccb_dma_handle + - offsetof(struct pm8001_ccb_info, buf_prd[0])); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info, buf_prd[0]); sata_cmd.addr_low = lower_32_bits(phys_addr); sata_cmd.addr_high = upper_32_bits(phys_addr); sata_cmd.esgl = cpu_to_le32(1 << 31); } else if (task->num_scatter == 1) { - __le64 dma_addr = cpu_to_le64(sg_dma_address(task->scatter)); + u64 dma_addr = sg_dma_address(task->scatter); sata_cmd.addr_low = lower_32_bits(dma_addr); sata_cmd.addr_high = upper_32_bits(dma_addr); sata_cmd.len = cpu_to_le32(task->total_xfer_len); @@ -4245,7 +4246,7 @@ static int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha, circularQ = &pm8001_ha->inbnd_q_tbl[0]; memset(&payload, 0, sizeof(payload)); - payload.tag = 1; + payload.tag = cpu_to_le32(1); payload.device_id = cpu_to_le32(device_id); PM8001_MSG_DBG(pm8001_ha, pm8001_printk("unregister device device_id = %d\n", device_id)); @@ -4269,7 +4270,7 @@ static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha, u32 opc = OPC_INB_LOCAL_PHY_CONTROL; memset(&payload, 0, sizeof(payload)); circularQ = &pm8001_ha->inbnd_q_tbl[0]; - payload.tag = 1; + payload.tag = cpu_to_le32(1); payload.phyop_phyid = cpu_to_le32(((phy_op & 0xff) << 8) | (phyId & 0x0F)); ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload); @@ -4563,8 +4564,10 @@ pm8001_chip_fw_flash_update_build(struct pm8001_hba_info *pm8001_ha, payload.cur_image_offset = cpu_to_le32(info->cur_image_offset); payload.total_image_len = cpu_to_le32(info->total_image_len); payload.len = info->sgl.im_len.len ; - payload.sgl_addr_lo = lower_32_bits(info->sgl.addr); - payload.sgl_addr_hi = upper_32_bits(info->sgl.addr); + payload.sgl_addr_lo = + cpu_to_le32(lower_32_bits(le64_to_cpu(info->sgl.addr))); + payload.sgl_addr_hi = + cpu_to_le32(upper_32_bits(le64_to_cpu(info->sgl.addr))); ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload); return ret; } diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h index 909132041c0..1a4611eb032 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.h +++ b/drivers/scsi/pm8001/pm8001_hwi.h @@ -625,7 +625,7 @@ struct set_nvm_data_req { __le32 tag; __le32 len_ir_vpdd; __le32 vpd_offset; - u32 reserved[8]; + __le32 reserved[8]; __le32 resp_addr_lo; __le32 resp_addr_hi; __le32 resp_len; -- cgit v1.2.3-70-g09d2 From 6260a5d221225f4e6befd98c6001325a3007a8c4 Mon Sep 17 00:00:00 2001 From: Nilesh Javali Date: Mon, 27 Feb 2012 03:08:51 -0800 Subject: [SCSI] iscsi_transport: Add support to display CHAP list and delete CHAP entry For offload iSCSI like qla4xxx CHAP entries are stored in FLASH. This patch adds support to list CHAP entries stored in FLASH and delete specified CHAP entry from FLASH using iscsi tools. Signed-off-by: Nilesh Javali Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_iscsi.c | 101 +++++++++++++++++++++++++++++++++++- include/scsi/iscsi_if.h | 29 +++++++++++ include/scsi/scsi_transport_iscsi.h | 4 ++ 3 files changed, 133 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index a20f1813cb5..7bf0dec4627 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -727,10 +727,11 @@ static void iscsi_session_release(struct device *dev) kfree(session); } -static int iscsi_is_session_dev(const struct device *dev) +int iscsi_is_session_dev(const struct device *dev) { return dev->release == iscsi_session_release; } +EXPORT_SYMBOL_GPL(iscsi_is_session_dev); static int iscsi_iter_session_fn(struct device *dev, void *data) { @@ -2001,6 +2002,96 @@ iscsi_send_ping(struct iscsi_transport *transport, struct iscsi_uevent *ev) return err; } +static int +iscsi_get_chap(struct iscsi_transport *transport, struct nlmsghdr *nlh) +{ + struct iscsi_uevent *ev = NLMSG_DATA(nlh); + struct Scsi_Host *shost = NULL; + struct iscsi_chap_rec *chap_rec; + struct iscsi_internal *priv; + struct sk_buff *skbchap; + struct nlmsghdr *nlhchap; + struct iscsi_uevent *evchap; + uint32_t chap_buf_size; + int len, err = 0; + char *buf; + + if (!transport->get_chap) + return -EINVAL; + + priv = iscsi_if_transport_lookup(transport); + if (!priv) + return -EINVAL; + + chap_buf_size = (ev->u.get_chap.num_entries * sizeof(*chap_rec)); + len = NLMSG_SPACE(sizeof(*ev) + chap_buf_size); + + shost = scsi_host_lookup(ev->u.get_chap.host_no); + if (!shost) { + printk(KERN_ERR "%s: failed. Cound not find host no %u\n", + __func__, ev->u.get_chap.host_no); + return -ENODEV; + } + + do { + int actual_size; + + skbchap = alloc_skb(len, GFP_KERNEL); + if (!skbchap) { + printk(KERN_ERR "can not deliver chap: OOM\n"); + err = -ENOMEM; + goto exit_get_chap; + } + + nlhchap = __nlmsg_put(skbchap, 0, 0, 0, + (len - sizeof(*nlhchap)), 0); + evchap = NLMSG_DATA(nlhchap); + memset(evchap, 0, sizeof(*evchap)); + evchap->transport_handle = iscsi_handle(transport); + evchap->type = nlh->nlmsg_type; + evchap->u.get_chap.host_no = ev->u.get_chap.host_no; + evchap->u.get_chap.chap_tbl_idx = ev->u.get_chap.chap_tbl_idx; + evchap->u.get_chap.num_entries = ev->u.get_chap.num_entries; + buf = (char *) ((char *)evchap + sizeof(*evchap)); + memset(buf, 0, chap_buf_size); + + err = transport->get_chap(shost, ev->u.get_chap.chap_tbl_idx, + &evchap->u.get_chap.num_entries, buf); + + actual_size = NLMSG_SPACE(sizeof(*ev) + chap_buf_size); + skb_trim(skbchap, NLMSG_ALIGN(actual_size)); + nlhchap->nlmsg_len = actual_size; + + err = iscsi_multicast_skb(skbchap, ISCSI_NL_GRP_ISCSID, + GFP_KERNEL); + } while (err < 0 && err != -ECONNREFUSED); + +exit_get_chap: + scsi_host_put(shost); + return err; +} + +static int iscsi_delete_chap(struct iscsi_transport *transport, + struct iscsi_uevent *ev) +{ + struct Scsi_Host *shost; + int err = 0; + + if (!transport->delete_chap) + return -ENOSYS; + + shost = scsi_host_lookup(ev->u.delete_chap.host_no); + if (!shost) { + printk(KERN_ERR "%s could not find host no %u\n", + __func__, ev->u.delete_chap.host_no); + return -ENODEV; + } + + err = transport->delete_chap(shost, ev->u.delete_chap.chap_tbl_idx); + scsi_host_put(shost); + return err; +} + static int iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group) { @@ -2149,6 +2240,12 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group) case ISCSI_UEVENT_PING: err = iscsi_send_ping(transport, ev); break; + case ISCSI_UEVENT_GET_CHAP: + err = iscsi_get_chap(transport, nlh); + break; + case ISCSI_UEVENT_DELETE_CHAP: + err = iscsi_delete_chap(transport, ev); + break; default: err = -ENOSYS; break; @@ -2198,6 +2295,8 @@ iscsi_if_rx(struct sk_buff *skb) */ if (ev->type == ISCSI_UEVENT_GET_STATS && !err) break; + if (ev->type == ISCSI_UEVENT_GET_CHAP && !err) + break; err = iscsi_if_send_reply(group, nlh->nlmsg_seq, nlh->nlmsg_type, 0, 0, ev, sizeof(*ev)); } while (err < 0 && err != -ECONNREFUSED && err != -ESRCH); diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index 7ff9678b7e7..228a8af0512 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -61,6 +61,8 @@ enum iscsi_uevent_e { ISCSI_UEVENT_PATH_UPDATE = UEVENT_BASE + 20, ISCSI_UEVENT_SET_IFACE_PARAMS = UEVENT_BASE + 21, ISCSI_UEVENT_PING = UEVENT_BASE + 22, + ISCSI_UEVENT_GET_CHAP = UEVENT_BASE + 23, + ISCSI_UEVENT_DELETE_CHAP = UEVENT_BASE + 24, /* up events */ ISCSI_KEVENT_RECV_PDU = KEVENT_BASE + 1, @@ -196,6 +198,18 @@ struct iscsi_uevent { uint32_t pid; /* unique ping id associated with each ping request */ } iscsi_ping; + struct msg_get_chap { + uint32_t host_no; + uint32_t num_entries; /* number of CHAP entries + * on request, number of + * valid CHAP entries on + * response */ + uint16_t chap_tbl_idx; + } get_chap; + struct msg_delete_chap { + uint32_t host_no; + uint16_t chap_tbl_idx; + } delete_chap; } u; union { /* messages k -> u */ @@ -548,4 +562,19 @@ struct iscsi_stats { __attribute__ ((aligned (sizeof(uint64_t)))); }; +enum chap_type_e { + CHAP_TYPE_OUT, + CHAP_TYPE_IN, +}; + +#define ISCSI_CHAP_AUTH_NAME_MAX_LEN 256 +#define ISCSI_CHAP_AUTH_SECRET_MAX_LEN 256 +struct iscsi_chap_rec { + uint16_t chap_tbl_idx; + enum chap_type_e chap_type; + char username[ISCSI_CHAP_AUTH_NAME_MAX_LEN]; + uint8_t password[ISCSI_CHAP_AUTH_SECRET_MAX_LEN]; + uint8_t password_length; +} __packed; + #endif diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index aede513f99b..53f0b361d66 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -147,6 +147,9 @@ struct iscsi_transport { int (*send_ping) (struct Scsi_Host *shost, uint32_t iface_num, uint32_t iface_type, uint32_t payload_size, uint32_t pid, struct sockaddr *dst_addr); + int (*get_chap) (struct Scsi_Host *shost, uint16_t chap_tbl_idx, + uint32_t *num_entries, char *buf); + int (*delete_chap) (struct Scsi_Host *shost, uint16_t chap_tbl_idx); }; /* @@ -325,5 +328,6 @@ extern void iscsi_destroy_iface(struct iscsi_iface *iface); extern struct iscsi_iface *iscsi_lookup_iface(int handle); extern char *iscsi_get_port_speed_name(struct Scsi_Host *shost); extern char *iscsi_get_port_state_name(struct Scsi_Host *shost); +extern int iscsi_is_session_dev(const struct device *dev); #endif -- cgit v1.2.3-70-g09d2 From 376738af500aca83bcdd78fb4c8c71a51b27f5a3 Mon Sep 17 00:00:00 2001 From: Nilesh Javali Date: Mon, 27 Feb 2012 03:08:52 -0800 Subject: [SCSI] qla4xxx: Add support to display CHAP list and delete CHAP entry For offload iSCSI like qla4xxx CHAP entries are stored in FLASH. This patch adds support to list CHAP entries stored in FLASH and delete specified CHAP entry from FLASH using iscsi tools. Signed-off-by: Nilesh Javali Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_def.h | 3 +- drivers/scsi/qla4xxx/ql4_os.c | 193 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 195 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index 776714d2d70..0b2487631d5 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -272,7 +272,7 @@ struct ddb_entry { * retried */ uint32_t default_time2wait; /* Default Min time between * relogins (+aens) */ - + uint16_t chap_tbl_idx; }; struct qla_ddb_index { @@ -685,6 +685,7 @@ struct scsi_qla_host { struct dma_pool *chap_dma_pool; uint8_t *chap_list; /* CHAP table cache */ struct mutex chap_sem; + #define CHAP_DMA_BLOCK_SIZE 512 struct workqueue_struct *task_wq; unsigned long ddb_idx_map[MAX_DDB_ENTRIES / BITS_PER_LONG]; diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 877c0e220ac..c6cfe324ab2 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -121,6 +121,9 @@ static void qla4xxx_conn_get_stats(struct iscsi_cls_conn *cls_conn, static int qla4xxx_send_ping(struct Scsi_Host *shost, uint32_t iface_num, uint32_t iface_type, uint32_t payload_size, uint32_t pid, struct sockaddr *dst_addr); +static int qla4xxx_get_chap_list(struct Scsi_Host *shost, uint16_t chap_tbl_idx, + uint32_t *num_entries, char *buf); +static int qla4xxx_delete_chap(struct Scsi_Host *shost, uint16_t chap_tbl_idx); /* * SCSI host template entry points @@ -199,6 +202,8 @@ static struct iscsi_transport qla4xxx_iscsi_transport = { .get_iface_param = qla4xxx_get_iface_param, .bsg_request = qla4xxx_bsg_request, .send_ping = qla4xxx_send_ping, + .get_chap = qla4xxx_get_chap_list, + .delete_chap = qla4xxx_delete_chap, }; static struct scsi_transport_template *qla4xxx_scsi_transport; @@ -342,6 +347,189 @@ static umode_t ql4_attr_is_visible(int param_type, int param) return 0; } +static int qla4xxx_get_chap_list(struct Scsi_Host *shost, uint16_t chap_tbl_idx, + uint32_t *num_entries, char *buf) +{ + struct scsi_qla_host *ha = to_qla_host(shost); + struct ql4_chap_table *chap_table; + struct iscsi_chap_rec *chap_rec; + int max_chap_entries = 0; + int valid_chap_entries = 0; + int ret = 0, i; + + if (is_qla8022(ha)) + max_chap_entries = (ha->hw.flt_chap_size / 2) / + sizeof(struct ql4_chap_table); + else + max_chap_entries = MAX_CHAP_ENTRIES_40XX; + + ql4_printk(KERN_INFO, ha, "%s: num_entries = %d, CHAP idx = %d\n", + __func__, *num_entries, chap_tbl_idx); + + if (!buf) { + ret = -ENOMEM; + goto exit_get_chap_list; + } + + chap_rec = (struct iscsi_chap_rec *) buf; + mutex_lock(&ha->chap_sem); + for (i = chap_tbl_idx; i < max_chap_entries; i++) { + chap_table = (struct ql4_chap_table *)ha->chap_list + i; + if (chap_table->cookie != + __constant_cpu_to_le16(CHAP_VALID_COOKIE)) + continue; + + chap_rec->chap_tbl_idx = i; + strncpy(chap_rec->username, chap_table->name, + ISCSI_CHAP_AUTH_NAME_MAX_LEN); + strncpy(chap_rec->password, chap_table->secret, + QL4_CHAP_MAX_SECRET_LEN); + chap_rec->password_length = chap_table->secret_len; + + if (chap_table->flags & BIT_7) /* local */ + chap_rec->chap_type = CHAP_TYPE_OUT; + + if (chap_table->flags & BIT_6) /* peer */ + chap_rec->chap_type = CHAP_TYPE_IN; + + chap_rec++; + + valid_chap_entries++; + if (valid_chap_entries == *num_entries) + break; + else + continue; + } + mutex_unlock(&ha->chap_sem); + +exit_get_chap_list: + ql4_printk(KERN_INFO, ha, "%s: Valid CHAP Entries = %d\n", + __func__, valid_chap_entries); + *num_entries = valid_chap_entries; + return ret; +} + +static int __qla4xxx_is_chap_active(struct device *dev, void *data) +{ + int ret = 0; + uint16_t *chap_tbl_idx = (uint16_t *) data; + struct iscsi_cls_session *cls_session; + struct iscsi_session *sess; + struct ddb_entry *ddb_entry; + + if (!iscsi_is_session_dev(dev)) + goto exit_is_chap_active; + + cls_session = iscsi_dev_to_session(dev); + sess = cls_session->dd_data; + ddb_entry = sess->dd_data; + + if (iscsi_session_chkready(cls_session)) + goto exit_is_chap_active; + + if (ddb_entry->chap_tbl_idx == *chap_tbl_idx) + ret = 1; + +exit_is_chap_active: + return ret; +} + +static int qla4xxx_is_chap_active(struct Scsi_Host *shost, + uint16_t chap_tbl_idx) +{ + int ret = 0; + + ret = device_for_each_child(&shost->shost_gendev, &chap_tbl_idx, + __qla4xxx_is_chap_active); + + return ret; +} + +static int qla4xxx_delete_chap(struct Scsi_Host *shost, uint16_t chap_tbl_idx) +{ + struct scsi_qla_host *ha = to_qla_host(shost); + struct ql4_chap_table *chap_table; + dma_addr_t chap_dma; + int max_chap_entries = 0; + uint32_t offset = 0; + uint32_t chap_size; + int ret = 0; + + chap_table = dma_pool_alloc(ha->chap_dma_pool, GFP_KERNEL, &chap_dma); + if (chap_table == NULL) + return -ENOMEM; + + memset(chap_table, 0, sizeof(struct ql4_chap_table)); + + if (is_qla8022(ha)) + max_chap_entries = (ha->hw.flt_chap_size / 2) / + sizeof(struct ql4_chap_table); + else + max_chap_entries = MAX_CHAP_ENTRIES_40XX; + + if (chap_tbl_idx > max_chap_entries) { + ret = -EINVAL; + goto exit_delete_chap; + } + + /* Check if chap index is in use. + * If chap is in use don't delet chap entry */ + ret = qla4xxx_is_chap_active(shost, chap_tbl_idx); + if (ret) { + ql4_printk(KERN_INFO, ha, "CHAP entry %d is in use, cannot " + "delete from flash\n", chap_tbl_idx); + ret = -EBUSY; + goto exit_delete_chap; + } + + chap_size = sizeof(struct ql4_chap_table); + if (is_qla40XX(ha)) + offset = FLASH_CHAP_OFFSET | (chap_tbl_idx * chap_size); + else { + offset = FLASH_RAW_ACCESS_ADDR + (ha->hw.flt_region_chap << 2); + /* flt_chap_size is CHAP table size for both ports + * so divide it by 2 to calculate the offset for second port + */ + if (ha->port_num == 1) + offset += (ha->hw.flt_chap_size / 2); + offset += (chap_tbl_idx * chap_size); + } + + ret = qla4xxx_get_flash(ha, chap_dma, offset, chap_size); + if (ret != QLA_SUCCESS) { + ret = -EINVAL; + goto exit_delete_chap; + } + + DEBUG2(ql4_printk(KERN_INFO, ha, "Chap Cookie: x%x\n", + __le16_to_cpu(chap_table->cookie))); + + if (__le16_to_cpu(chap_table->cookie) != CHAP_VALID_COOKIE) { + ql4_printk(KERN_ERR, ha, "No valid chap entry found\n"); + goto exit_delete_chap; + } + + chap_table->cookie = __constant_cpu_to_le16(0xFFFF); + + offset = FLASH_CHAP_OFFSET | + (chap_tbl_idx * sizeof(struct ql4_chap_table)); + ret = qla4xxx_set_flash(ha, chap_dma, offset, chap_size, + FLASH_OPT_RMW_COMMIT); + if (ret == QLA_SUCCESS && ha->chap_list) { + mutex_lock(&ha->chap_sem); + /* Update ha chap_list cache */ + memcpy((struct ql4_chap_table *)ha->chap_list + chap_tbl_idx, + chap_table, sizeof(struct ql4_chap_table)); + mutex_unlock(&ha->chap_sem); + } + if (ret != QLA_SUCCESS) + ret = -EINVAL; + +exit_delete_chap: + dma_pool_free(ha->chap_dma_pool, chap_table, chap_dma); + return ret; +} + static int qla4xxx_get_iface_param(struct iscsi_iface *iface, enum iscsi_param_type param_type, int param, char *buf) @@ -1638,13 +1826,17 @@ static void qla4xxx_copy_fwddb_param(struct scsi_qla_host *ha, { int buflen = 0; struct iscsi_session *sess; + struct ddb_entry *ddb_entry; struct iscsi_conn *conn; char ip_addr[DDB_IPADDR_LEN]; uint16_t options = 0; sess = cls_sess->dd_data; + ddb_entry = sess->dd_data; conn = cls_conn->dd_data; + ddb_entry->chap_tbl_idx = le16_to_cpu(fw_ddb_entry->chap_tbl_idx); + conn->max_recv_dlength = BYTE_UNITS * le16_to_cpu(fw_ddb_entry->iscsi_max_rcv_data_seg_len); @@ -1772,6 +1964,7 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait); /* Update params */ + ddb_entry->chap_tbl_idx = le16_to_cpu(fw_ddb_entry->chap_tbl_idx); conn->max_recv_dlength = BYTE_UNITS * le16_to_cpu(fw_ddb_entry->iscsi_max_rcv_data_seg_len); -- cgit v1.2.3-70-g09d2 From 30534952743f73f1de3c6c056400d7249f5c7f75 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 27 Feb 2012 03:08:53 -0800 Subject: [SCSI] scsi_transport: Export CHAP index as sysfs attribute Signed-off-by: Mike Christie Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_iscsi.c | 8 ++++++++ include/scsi/iscsi_if.h | 3 +++ 2 files changed, 11 insertions(+) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 7bf0dec4627..fac31730add 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -2475,6 +2475,8 @@ iscsi_session_attr(username, ISCSI_PARAM_USERNAME, 1); iscsi_session_attr(username_in, ISCSI_PARAM_USERNAME_IN, 1); iscsi_session_attr(password, ISCSI_PARAM_PASSWORD, 1); iscsi_session_attr(password_in, ISCSI_PARAM_PASSWORD_IN, 1); +iscsi_session_attr(chap_out_idx, ISCSI_PARAM_CHAP_OUT_IDX, 1); +iscsi_session_attr(chap_in_idx, ISCSI_PARAM_CHAP_IN_IDX, 1); iscsi_session_attr(fast_abort, ISCSI_PARAM_FAST_ABORT, 0); iscsi_session_attr(abort_tmo, ISCSI_PARAM_ABORT_TMO, 0); iscsi_session_attr(lu_reset_tmo, ISCSI_PARAM_LU_RESET_TMO, 0); @@ -2571,6 +2573,8 @@ static struct attribute *iscsi_session_attrs[] = { &dev_attr_priv_sess_recovery_tmo.attr, &dev_attr_priv_sess_state.attr, &dev_attr_priv_sess_creator.attr, + &dev_attr_sess_chap_out_idx.attr, + &dev_attr_sess_chap_in_idx.attr, NULL, }; @@ -2602,6 +2606,10 @@ static umode_t iscsi_session_attr_is_visible(struct kobject *kobj, param = ISCSI_PARAM_TARGET_NAME; else if (attr == &dev_attr_sess_tpgt.attr) param = ISCSI_PARAM_TPGT; + else if (attr == &dev_attr_sess_chap_in_idx.attr) + param = ISCSI_PARAM_CHAP_IN_IDX; + else if (attr == &dev_attr_sess_chap_out_idx.attr) + param = ISCSI_PARAM_CHAP_OUT_IDX; else if (attr == &dev_attr_sess_password.attr) param = ISCSI_PARAM_USERNAME; else if (attr == &dev_attr_sess_password_in.attr) diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index 228a8af0512..9c23ee8fd2d 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -450,6 +450,9 @@ enum iscsi_param { ISCSI_PARAM_TGT_RESET_TMO, ISCSI_PARAM_TARGET_ALIAS, + + ISCSI_PARAM_CHAP_IN_IDX, + ISCSI_PARAM_CHAP_OUT_IDX, /* must always be last */ ISCSI_PARAM_MAX, }; -- cgit v1.2.3-70-g09d2 From fca9f04d460bf7c6af397dd994f1d81a3037f9dc Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 27 Feb 2012 03:08:54 -0800 Subject: [SCSI] qla4xxx: Export CHAP index as sysfs attribute Signed-off-by: Mike Christie Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_glbl.h | 2 ++ drivers/scsi/qla4xxx/ql4_mbx.c | 9 +++++++-- drivers/scsi/qla4xxx/ql4_os.c | 45 ++++++++++++++++++++++++++++++++++++++++- 3 files changed, 53 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h index 954ba918825..910536667cf 100644 --- a/drivers/scsi/qla4xxx/ql4_glbl.h +++ b/drivers/scsi/qla4xxx/ql4_glbl.h @@ -81,6 +81,8 @@ int qla4xxx_set_flash(struct scsi_qla_host *ha, dma_addr_t dma_addr, uint32_t offset, uint32_t length, uint32_t options); int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, uint8_t outCount, uint32_t *mbx_cmd, uint32_t *mbx_sts); +int qla4xxx_get_chap_index(struct scsi_qla_host *ha, char *username, + char *password, int bidi, uint16_t *chap_index); void qla4xxx_queue_iocb(struct scsi_qla_host *ha); void qla4xxx_complete_iocb(struct scsi_qla_host *ha); diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index eaf21852887..71331e3b440 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -1426,8 +1426,8 @@ exit_set_chap: * match is found. If a match is not found then add the entry in FLASH and * return the index at which entry is written in the FLASH. **/ -static int qla4xxx_get_chap_index(struct scsi_qla_host *ha, char *username, - char *password, int bidi, uint16_t *chap_index) +int qla4xxx_get_chap_index(struct scsi_qla_host *ha, char *username, + char *password, int bidi, uint16_t *chap_index) { int i, rval; int free_index = -1; @@ -1446,6 +1446,11 @@ static int qla4xxx_get_chap_index(struct scsi_qla_host *ha, char *username, return QLA_ERROR; } + if (!username || !password) { + ql4_printk(KERN_ERR, ha, "Do not have username and psw\n"); + return QLA_ERROR; + } + mutex_lock(&ha->chap_sem); for (i = 0; i < max_chap_entries; i++) { chap_table = (struct ql4_chap_table *)ha->chap_list + i; diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index c6cfe324ab2..cbaf2b33e48 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -83,6 +83,8 @@ static void qla4xxx_config_dma_addressing(struct scsi_qla_host *ha); /* * iSCSI template entry points */ +static int qla4xxx_session_get_param(struct iscsi_cls_session *cls_sess, + enum iscsi_param param, char *buf); static int qla4xxx_conn_get_param(struct iscsi_cls_conn *conn, enum iscsi_param param, char *buf); static int qla4xxx_host_get_param(struct Scsi_Host *shost, @@ -186,7 +188,7 @@ static struct iscsi_transport qla4xxx_iscsi_transport = { .destroy_conn = qla4xxx_conn_destroy, .set_param = iscsi_set_param, .get_conn_param = qla4xxx_conn_get_param, - .get_session_param = iscsi_session_get_param, + .get_session_param = qla4xxx_session_get_param, .get_ep_param = qla4xxx_get_ep_param, .ep_connect = qla4xxx_ep_connect, .ep_poll = qla4xxx_ep_poll, @@ -317,6 +319,12 @@ static umode_t ql4_attr_is_visible(int param_type, int param) case ISCSI_PARAM_MAX_RECV_DLENGTH: case ISCSI_PARAM_MAX_XMIT_DLENGTH: case ISCSI_PARAM_IFACE_NAME: + case ISCSI_PARAM_CHAP_OUT_IDX: + case ISCSI_PARAM_CHAP_IN_IDX: + case ISCSI_PARAM_USERNAME: + case ISCSI_PARAM_PASSWORD: + case ISCSI_PARAM_USERNAME_IN: + case ISCSI_PARAM_PASSWORD_IN: return S_IRUGO; default: return 0; @@ -1288,6 +1296,41 @@ exit_init_fw_cb: return rval; } +static int qla4xxx_session_get_param(struct iscsi_cls_session *cls_sess, + enum iscsi_param param, char *buf) +{ + struct iscsi_session *sess = cls_sess->dd_data; + struct ddb_entry *ddb_entry = sess->dd_data; + struct scsi_qla_host *ha = ddb_entry->ha; + int rval, len; + uint16_t idx; + + switch (param) { + case ISCSI_PARAM_CHAP_IN_IDX: + rval = qla4xxx_get_chap_index(ha, sess->username_in, + sess->password_in, BIDI_CHAP, + &idx); + if (rval) + return -EINVAL; + + len = sprintf(buf, "%hu\n", idx); + break; + case ISCSI_PARAM_CHAP_OUT_IDX: + rval = qla4xxx_get_chap_index(ha, sess->username, + sess->password, LOCAL_CHAP, + &idx); + if (rval) + return -EINVAL; + + len = sprintf(buf, "%hu\n", idx); + break; + default: + return iscsi_session_get_param(cls_sess, param, buf); + } + + return len; +} + static int qla4xxx_conn_get_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param, char *buf) { -- cgit v1.2.3-70-g09d2 From 173269ef2900bf824032103b98f3446375a4f8d9 Mon Sep 17 00:00:00 2001 From: Manish Rangankar Date: Mon, 27 Feb 2012 03:08:55 -0800 Subject: [SCSI] qla4xxx: Add support for multiple session per host. This patch will allow iscsiadm to create multiple session for the same target on per host. Signed-off-by: Manish Rangankar Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_def.h | 1 + drivers/scsi/qla4xxx/ql4_mbx.c | 10 +++++++++- drivers/scsi/qla4xxx/ql4_os.c | 28 +++++++++++++++++++++++++--- 3 files changed, 35 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index 0b2487631d5..7f2492e88be 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -291,6 +291,7 @@ struct ql4_tuple_ddb { uint16_t options; #define DDB_OPT_IPV6 0x0e0e #define DDB_OPT_IPV4 0x0f0f + uint8_t isid[6]; }; /* diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index 71331e3b440..b2d336c236c 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -1607,7 +1607,7 @@ int qla4xxx_set_param_ddbentry(struct scsi_qla_host *ha, char *ip; uint16_t iscsi_opts = 0; uint32_t options = 0; - uint16_t idx; + uint16_t idx, *ptid; fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), &fw_ddb_entry_dma, GFP_KERNEL); @@ -1633,6 +1633,14 @@ int qla4xxx_set_param_ddbentry(struct scsi_qla_host *ha, goto exit_set_param; } + ptid = (uint16_t *)&fw_ddb_entry->isid[1]; + *ptid = cpu_to_le16((uint16_t)ddb_entry->sess->target_id); + + DEBUG2(ql4_printk(KERN_INFO, ha, "ISID [%02x%02x%02x%02x%02x%02x]\n", + fw_ddb_entry->isid[5], fw_ddb_entry->isid[4], + fw_ddb_entry->isid[3], fw_ddb_entry->isid[2], + fw_ddb_entry->isid[1], fw_ddb_entry->isid[0])); + iscsi_opts = le16_to_cpu(fw_ddb_entry->iscsi_options); memset(fw_ddb_entry->iscsi_alias, 0, sizeof(fw_ddb_entry->iscsi_alias)); diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index cbaf2b33e48..50074ed9576 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -4252,11 +4252,13 @@ static void qla4xxx_convert_param_ddb(struct dev_db_entry *fw_ddb_entry, sprintf(tddb->ip_addr, "%pI4", fw_ddb_entry->ip_addr); tddb->port = le16_to_cpu(fw_ddb_entry->port); + memcpy(&tddb->isid[0], &fw_ddb_entry->isid[0], sizeof(tddb->isid)); } static int qla4xxx_compare_tuple_ddb(struct scsi_qla_host *ha, struct ql4_tuple_ddb *old_tddb, - struct ql4_tuple_ddb *new_tddb) + struct ql4_tuple_ddb *new_tddb, + uint8_t is_isid_compare) { if (strcmp(old_tddb->iscsi_name, new_tddb->iscsi_name)) return QLA_ERROR; @@ -4267,6 +4269,26 @@ static int qla4xxx_compare_tuple_ddb(struct scsi_qla_host *ha, if (old_tddb->port != new_tddb->port) return QLA_ERROR; + /* For multi sessions, driver generates the ISID, so do not compare + * ISID in reset path since it would be a comparision between the + * driver generated ISID and firmware generated ISID. This could + * lead to adding duplicated DDBs in the list as driver generated + * ISID would not match firmware generated ISID. + */ + if (is_isid_compare) { + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: old ISID [%02x%02x%02x" + "%02x%02x%02x] New ISID [%02x%02x%02x%02x%02x%02x]\n", + __func__, old_tddb->isid[5], old_tddb->isid[4], + old_tddb->isid[3], old_tddb->isid[2], old_tddb->isid[1], + old_tddb->isid[0], new_tddb->isid[5], new_tddb->isid[4], + new_tddb->isid[3], new_tddb->isid[2], new_tddb->isid[1], + new_tddb->isid[0])); + + if (memcmp(&old_tddb->isid[0], &new_tddb->isid[0], + sizeof(old_tddb->isid))) + return QLA_ERROR; + } + DEBUG2(ql4_printk(KERN_INFO, ha, "Match Found, fw[%d,%d,%s,%s], [%d,%d,%s,%s]", old_tddb->port, old_tddb->tpgt, old_tddb->ip_addr, @@ -4309,7 +4331,7 @@ static int qla4xxx_is_session_exists(struct scsi_qla_host *ha, continue; qla4xxx_get_param_ddb(ddb_entry, tmp_tddb); - if (!qla4xxx_compare_tuple_ddb(ha, fw_tddb, tmp_tddb)) { + if (!qla4xxx_compare_tuple_ddb(ha, fw_tddb, tmp_tddb, false)) { ret = QLA_SUCCESS; /* found */ goto exit_check; } @@ -4352,7 +4374,7 @@ static int qla4xxx_is_flash_ddb_exists(struct scsi_qla_host *ha, list_for_each_entry_safe(nt_ddb_idx, nt_ddb_idx_tmp, list_nt, list) { qla4xxx_convert_param_ddb(&nt_ddb_idx->fw_ddb, tmp_tddb); - if (!qla4xxx_compare_tuple_ddb(ha, fw_tddb, tmp_tddb)) { + if (!qla4xxx_compare_tuple_ddb(ha, fw_tddb, tmp_tddb, true)) { ret = QLA_SUCCESS; /* found */ goto exit_check; } -- cgit v1.2.3-70-g09d2 From a7380a65312c98317aab70df6512c620369c2f19 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Mon, 27 Feb 2012 03:08:56 -0800 Subject: [SCSI] qla4xxx: Fix sparse warning Fix following warning:- drivers/scsi/qla4xxx/ql4_os.c:35:5: warning: symbol 'ql4xdisablesysfsboot' was not declared. Should it be static? drivers/scsi/qla4xxx/ql4_iocb.c:461:5: warning: symbol 'qla4xxx_send_mbox_iocb' was not declared. Should it be static? drivers/scsi/qla4xxx/ql4_os.c:3025:6: warning: symbol 'qla4xxx_do_work' was not declared. Should it be static? Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_iocb.c | 4 ++-- drivers/scsi/qla4xxx/ql4_os.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_iocb.c b/drivers/scsi/qla4xxx/ql4_iocb.c index c70651ddaf8..2a2022a6bb9 100644 --- a/drivers/scsi/qla4xxx/ql4_iocb.c +++ b/drivers/scsi/qla4xxx/ql4_iocb.c @@ -458,8 +458,8 @@ static struct mrb *qla4xxx_get_new_mrb(struct scsi_qla_host *ha) return mrb; } -int qla4xxx_send_mbox_iocb(struct scsi_qla_host *ha, struct mrb *mrb, - uint32_t *in_mbox) +static int qla4xxx_send_mbox_iocb(struct scsi_qla_host *ha, struct mrb *mrb, + uint32_t *in_mbox) { int rval = QLA_SUCCESS; uint32_t i; diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 50074ed9576..d1520ad3ae6 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -32,7 +32,7 @@ static struct kmem_cache *srb_cachep; /* * Module parameter information and variables */ -int ql4xdisablesysfsboot = 1; +static int ql4xdisablesysfsboot = 1; module_param(ql4xdisablesysfsboot, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ql4xdisablesysfsboot, " Set to disable exporting boot targets to sysfs.\n" @@ -3238,7 +3238,7 @@ int qla4xxx_post_ping_evt_work(struct scsi_qla_host *ha, return QLA_SUCCESS; } -void qla4xxx_do_work(struct scsi_qla_host *ha) +static void qla4xxx_do_work(struct scsi_qla_host *ha) { struct qla4_work_evt *e, *tmp; unsigned long flags; -- cgit v1.2.3-70-g09d2 From 3573bfb2306b58b88adccaf95fa310c53d392903 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Mon, 27 Feb 2012 03:08:57 -0800 Subject: [SCSI] qla4xxx: trivial cleanup 1. Do not initialise globals to 0 2. Fix wrong spelling in debug message 3. Modified debug log messages Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_mbx.c | 2 +- drivers/scsi/qla4xxx/ql4_os.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index b2d336c236c..7ac21dabbf2 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -622,7 +622,7 @@ int qla4xxx_get_firmware_status(struct scsi_qla_host * ha) return QLA_ERROR; } - ql4_printk(KERN_INFO, ha, "%ld firmare IOCBs available (%d).\n", + ql4_printk(KERN_INFO, ha, "%ld firmware IOCBs available (%d).\n", ha->host_no, mbox_sts[2]); return QLA_SUCCESS; diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index d1520ad3ae6..281328dd934 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -39,7 +39,7 @@ MODULE_PARM_DESC(ql4xdisablesysfsboot, "\t\t 0 - Export boot targets\n" "\t\t 1 - Do not export boot targets (Default)"); -int ql4xdontresethba = 0; +int ql4xdontresethba; module_param(ql4xdontresethba, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ql4xdontresethba, " Don't reset the HBA for driver recovery.\n" @@ -71,7 +71,7 @@ MODULE_PARM_DESC(ql4xmaxqdepth, static int ql4xsess_recovery_tmo = QL4_SESS_RECOVERY_TMO; module_param(ql4xsess_recovery_tmo, int, S_IRUGO); MODULE_PARM_DESC(ql4xsess_recovery_tmo, - "Target Session Recovery Timeout.\n" + " Target Session Recovery Timeout.\n" "\t\t Default: 120 sec."); static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha); @@ -5033,8 +5033,8 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, ha->patch_number, ha->build_number); if (qla4xxx_setup_boot_info(ha)) - ql4_printk(KERN_ERR, ha, "%s:ISCSI boot info setup failed\n", - __func__); + ql4_printk(KERN_ERR, ha, + "%s: No iSCSI boot target configured\n", __func__); /* Perform the build ddb list and login to each */ qla4xxx_build_ddb_list(ha, INIT_ADAPTER); -- cgit v1.2.3-70-g09d2 From cd8df932d894f3128c884e3ae1b2b484540513db Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Mon, 27 Feb 2012 03:08:58 -0800 Subject: [SCSI] qla4xxx: Update driver version to 5.02.00-k15 Signed-off-by: Vikas Chaudhary Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h index 7f20b7f1084..ede9af94414 100644 --- a/drivers/scsi/qla4xxx/ql4_version.h +++ b/drivers/scsi/qla4xxx/ql4_version.h @@ -5,4 +5,4 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ -#define QLA4XXX_DRIVER_VERSION "5.02.00-k14" +#define QLA4XXX_DRIVER_VERSION "5.02.00-k15" -- cgit v1.2.3-70-g09d2