From 41f13ed46e0d3741b4de6fbcb3febae50896e6b5 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 29 Aug 2013 06:24:33 -0300 Subject: [media] Documentation: dt: Add binding documentation for S5K6A3 image sensor This patch adds binding documentation for the Samsung S5K6A3(YX) raw image sensor. Signed-off-by: Sylwester Nawrocki Acked-by: Kyungmin Park Acked-by: Mark Rutland Signed-off-by: Mauro Carvalho Chehab --- .../devicetree/bindings/media/samsung-s5k6a3.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/samsung-s5k6a3.txt diff --git a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt new file mode 100644 index 00000000000..cce01e82f3e --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt @@ -0,0 +1,33 @@ +Samsung S5K6A3(YX) raw image sensor +--------------------------------- + +S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces +and CCI (I2C compatible) control bus. + +Required properties: + +- compatible : "samsung,s5k6a3"; +- reg : I2C slave address of the sensor; +- svdda-supply : core voltage supply; +- svddio-supply : I/O voltage supply; +- afvdd-supply : AF (actuator) voltage supply; +- gpios : specifier of a GPIO connected to the RESET pin; +- clocks : should contain list of phandle and clock specifier pairs + according to common clock bindings for the clocks described + in the clock-names property; +- clock-names : should contain "extclk" entry for the sensor's EXTCLK clock; + +Optional properties: + +- clock-frequency : the frequency at which the "extclk" clock should be + configured to operate, in Hz; if this property is not + specified default 24 MHz value will be used. + +The common video interfaces bindings (see video-interfaces.txt) should be +used to specify link to the image data receiver. The S5K6A3(YX) device +node should contain one 'port' child node with an 'endpoint' subnode. + +Following properties are valid for the endpoint node: + +- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in + video-interfaces.txt. The sensor supports only one data lane. -- cgit v1.2.3-70-g09d2 From ae704bc3bd1b7208c6061151f9b56e13664778ad Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 20 Dec 2013 19:57:47 -0300 Subject: [media] Documentation: dt: Add binding documentation for S5C73M3 camera This adds DT binding documentation for Samsung S5C73M3 camera sensor with an embedded ISP. Signed-off-by: Sylwester Nawrocki Acked-by: Kyungmin Park Acked-by: Mark Rutland Signed-off-by: Mauro Carvalho Chehab --- .../devicetree/bindings/media/samsung-s5c73m3.txt | 97 ++++++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/samsung-s5c73m3.txt diff --git a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt new file mode 100644 index 00000000000..2c85c4538a6 --- /dev/null +++ b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt @@ -0,0 +1,97 @@ +Samsung S5C73M3 8Mp camera ISP +------------------------------ + +The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656) video +data busses. The I2C bus is the main control bus and additionally the SPI bus +is used, mostly for transferring the firmware to and from the device. Two +slave device nodes corresponding to these control bus interfaces are required +and should be placed under respective bus controller nodes. + +I2C slave device node +--------------------- + +Required properties: + +- compatible : "samsung,s5c73m3"; +- reg : I2C slave address of the sensor; +- vdd-int-supply : digital power supply (1.2V); +- vdda-supply : analog power supply (1.2V); +- vdd-reg-supply : regulator input power supply (2.8V); +- vddio-host-supply : host I/O power supply (1.8V to 2.8V); +- vddio-cis-supply : CIS I/O power supply (1.2V to 1.8V); +- vdd-af-supply : lens power supply (2.8V); +- xshutdown-gpios : specifier of GPIO connected to the XSHUTDOWN pin; +- standby-gpios : specifier of GPIO connected to the STANDBY pin; +- clocks : should contain list of phandle and clock specifier pairs + according to common clock bindings for the clocks described + in the clock-names property; +- clock-names : should contain "cis_extclk" entry for the CIS_EXTCLK clock; + +Optional properties: + +- clock-frequency : the frequency at which the "cis_extclk" clock should be + configured to operate, in Hz; if this property is not + specified default 24 MHz value will be used. + +The common video interfaces bindings (see video-interfaces.txt) should be used +to specify link from the S5C73M3 to an external image data receiver. The S5C73M3 +device node should contain one 'port' child node with an 'endpoint' subnode for +this purpose. The data link from a raw image sensor to the S5C73M3 can be +similarly specified, but it is optional since the S5C73M3 ISP and a raw image +sensor are usually inseparable and form a hybrid module. + +Following properties are valid for the endpoint node(s): + +endpoint subnode +---------------- + +- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in + video-interfaces.txt. This sensor doesn't support data lane remapping + and physical lane indexes in subsequent elements of the array should + be only consecutive ascending values. + +SPI device node +--------------- + +Required properties: + +- compatible : "samsung,s5c73m3"; + +For more details see description of the SPI busses bindings +(../spi/spi-bus.txt) and bindings of a specific bus controller. + +Example: + +i2c@138A000000 { + ... + s5c73m3@3c { + compatible = "samsung,s5c73m3"; + reg = <0x3c>; + vdd-int-supply = <&buck9_reg>; + vdda-supply = <&ldo17_reg>; + vdd-reg-supply = <&cam_io_reg>; + vddio-host-supply = <&ldo18_reg>; + vddio-cis-supply = <&ldo9_reg>; + vdd-af-supply = <&cam_af_reg>; + clock-frequency = <24000000>; + clocks = <&clk 0>; + clock-names = "cis_extclk"; + reset-gpios = <&gpf1 3 1>; + standby-gpios = <&gpm0 1 1>; + port { + s5c73m3_ep: endpoint { + remote-endpoint = <&csis0_ep>; + data-lanes = <1 2 3 4>; + }; + }; + }; +}; + +spi@1392000 { + ... + s5c73m3_spi: s5c73m3@0 { + compatible = "samsung,s5c73m3"; + reg = <0>; + ... + }; +}; -- cgit v1.2.3-70-g09d2 From 53f8a899a38d8e8a02ce390d400327f6abd66074 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 20 Dec 2013 18:56:05 -0300 Subject: [media] Documentation: devicetree: Update Samsung FIMC DT binding This patch documents following updates of the Exynos4 SoC camera subsystem devicetree binding: - addition of #clock-cells and clock-output-names properties to 'camera' node - these are now needed so the image sensor sub-devices can reference clocks provided by the camera host interface, - dropped a note about required clock-frequency properties at the image sensor nodes; the sensor devices can now control their clock explicitly through the clk API and there is no need to require this property in the camera host interface binding. Signed-off-by: Sylwester Nawrocki Acked-by: Kyungmin Park Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- .../devicetree/bindings/media/samsung-fimc.txt | 44 ++++++++++++++-------- 1 file changed, 29 insertions(+), 15 deletions(-) diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt index 96312f6c4c2..922d6f8e74b 100644 --- a/Documentation/devicetree/bindings/media/samsung-fimc.txt +++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt @@ -15,11 +15,21 @@ Common 'camera' node Required properties: -- compatible : must be "samsung,fimc", "simple-bus" -- clocks : list of clock specifiers, corresponding to entries in - the clock-names property; -- clock-names : must contain "sclk_cam0", "sclk_cam1", "pxl_async0", - "pxl_async1" entries, matching entries in the clocks property. +- compatible: must be "samsung,fimc", "simple-bus" +- clocks: list of clock specifiers, corresponding to entries in + the clock-names property; +- clock-names : must contain "sclk_cam0", "sclk_cam1", "pxl_async0", + "pxl_async1" entries, matching entries in the clocks property. + +- #clock-cells: from the common clock bindings (../clock/clock-bindings.txt), + must be 1. A clock provider is associated with the 'camera' node and it should + be referenced by external sensors that use clocks provided by the SoC on + CAM_*_CLKOUT pins. The clock specifier cell stores an index of a clock. + The indices are 0, 1 for CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively. + +- clock-output-names: from the common clock bindings, should contain names of + clocks registered by the camera subsystem corresponding to CAM_A_CLKOUT, + CAM_B_CLKOUT output clocks respectively. The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used to define a required pinctrl state named "default" and optional pinctrl states: @@ -32,6 +42,7 @@ way around. The 'camera' node must include at least one 'fimc' child node. + 'fimc' device nodes ------------------- @@ -88,8 +99,8 @@ port nodes specifies data input - 0, 1 indicates input A, B respectively. Optional properties -- samsung,camclk-out : specifies clock output for remote sensor, - 0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT; +- samsung,camclk-out (deprecated) : specifies clock output for remote sensor, + 0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT; Image sensor nodes ------------------ @@ -97,8 +108,6 @@ Image sensor nodes The sensor device nodes should be added to their control bus controller (e.g. I2C0) nodes and linked to a port node in the csis or the parallel-ports node, using the common video interfaces bindings, defined in video-interfaces.txt. -The implementation of this bindings requires clock-frequency property to be -present in the sensor device nodes. Example: @@ -114,7 +123,7 @@ Example: vddio-supply = <...>; clock-frequency = <24000000>; - clocks = <...>; + clocks = <&camera 1>; clock-names = "mclk"; port { @@ -135,7 +144,7 @@ Example: vddio-supply = <...>; clock-frequency = <24000000>; - clocks = <...>; + clocks = <&camera 0>; clock-names = "mclk"; port { @@ -149,12 +158,17 @@ Example: camera { compatible = "samsung,fimc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - status = "okay"; - + clocks = <&clock 132>, <&clock 133>, <&clock 351>, + <&clock 352>; + clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", + "pxl_async1"; + #clock-cells = <1>; + clock-output-names = "cam_a_clkout", "cam_b_clkout"; pinctrl-names = "default"; pinctrl-0 = <&cam_port_a_clk_active>; + status = "okay"; + #address-cells = <1>; + #size-cells = <1>; /* parallel camera ports */ parallel-ports { -- cgit v1.2.3-70-g09d2 From 814b4dd9aa4734f33ccf0e13d872391eaaa72762 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 9 Aug 2013 15:56:00 -0300 Subject: [media] V4L: Add driver for s5k6a3 image sensor This patch adds subdev driver for Samsung S5K6A3 raw image sensor. As it is intended at the moment to be used only with the Exynos FIMC-IS (camera ISP) subsystem it is pretty minimal subdev driver. It doesn't do any I2C communication since the sensor is controlled by the ISP and its own firmware. This driver, if needed, can be updated in future into a regular subdev driver where the main CPU communicates with the sensor directly. Signed-off-by: Sylwester Nawrocki Acked-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/Kconfig | 8 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/s5k6a3.c | 389 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 398 insertions(+) create mode 100644 drivers/media/i2c/s5k6a3.c diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 194caba3ea8..4cb85ce0a66 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -579,6 +579,14 @@ config VIDEO_S5K6AA This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M camera sensor with an embedded SoC image signal processor. +config VIDEO_S5K6A3 + tristate "Samsung S5K6A3 sensor support" + depends on MEDIA_CAMERA_SUPPORT + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + ---help--- + This is a V4L2 sensor-level driver for Samsung S5K6A3 raw + camera sensor. + config VIDEO_S5K4ECGX tristate "Samsung S5K4ECGX sensor support" depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index 01b6bfc0db5..01ae9328e58 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -66,6 +66,7 @@ obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o +obj-$(CONFIG_VIDEO_S5K6A3) += s5k6a3.o obj-$(CONFIG_VIDEO_S5K4ECGX) += s5k4ecgx.o obj-$(CONFIG_VIDEO_S5K5BAF) += s5k5baf.o obj-$(CONFIG_VIDEO_S5C73M3) += s5c73m3/ diff --git a/drivers/media/i2c/s5k6a3.c b/drivers/media/i2c/s5k6a3.c new file mode 100644 index 00000000000..7bc2271ca00 --- /dev/null +++ b/drivers/media/i2c/s5k6a3.c @@ -0,0 +1,389 @@ +/* + * Samsung S5K6A3 image sensor driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define S5K6A3_SENSOR_MAX_WIDTH 1412 +#define S5K6A3_SENSOR_MAX_HEIGHT 1412 +#define S5K6A3_SENSOR_MIN_WIDTH 32 +#define S5K6A3_SENSOR_MIN_HEIGHT 32 + +#define S5K6A3_DEFAULT_WIDTH 1296 +#define S5K6A3_DEFAULT_HEIGHT 732 + +#define S5K6A3_DRV_NAME "S5K6A3" +#define S5K6A3_CLK_NAME "extclk" +#define S5K6A3_DEFAULT_CLK_FREQ 24000000U + +enum { + S5K6A3_SUPP_VDDA, + S5K6A3_SUPP_VDDIO, + S5K6A3_SUPP_AFVDD, + S5K6A3_NUM_SUPPLIES, +}; + +/** + * struct s5k6a3 - fimc-is sensor data structure + * @dev: pointer to this I2C client device structure + * @subdev: the image sensor's v4l2 subdev + * @pad: subdev media source pad + * @supplies: image sensor's voltage regulator supplies + * @gpio_reset: GPIO connected to the sensor's reset pin + * @lock: mutex protecting the structure's members below + * @format: media bus format at the sensor's source pad + */ +struct s5k6a3 { + struct device *dev; + struct v4l2_subdev subdev; + struct media_pad pad; + struct regulator_bulk_data supplies[S5K6A3_NUM_SUPPLIES]; + int gpio_reset; + struct mutex lock; + struct v4l2_mbus_framefmt format; + struct clk *clock; + u32 clock_frequency; + int power_count; +}; + +static const char * const s5k6a3_supply_names[] = { + [S5K6A3_SUPP_VDDA] = "svdda", + [S5K6A3_SUPP_VDDIO] = "svddio", + [S5K6A3_SUPP_AFVDD] = "afvdd", +}; + +static inline struct s5k6a3 *sd_to_s5k6a3(struct v4l2_subdev *sd) +{ + return container_of(sd, struct s5k6a3, subdev); +} + +static const struct v4l2_mbus_framefmt s5k6a3_formats[] = { + { + .code = V4L2_MBUS_FMT_SGRBG10_1X10, + .colorspace = V4L2_COLORSPACE_SRGB, + .field = V4L2_FIELD_NONE, + } +}; + +static const struct v4l2_mbus_framefmt *find_sensor_format( + struct v4l2_mbus_framefmt *mf) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s5k6a3_formats); i++) + if (mf->code == s5k6a3_formats[i].code) + return &s5k6a3_formats[i]; + + return &s5k6a3_formats[0]; +} + +static int s5k6a3_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= ARRAY_SIZE(s5k6a3_formats)) + return -EINVAL; + + code->code = s5k6a3_formats[code->index].code; + return 0; +} + +static void s5k6a3_try_format(struct v4l2_mbus_framefmt *mf) +{ + const struct v4l2_mbus_framefmt *fmt; + + fmt = find_sensor_format(mf); + mf->code = fmt->code; + v4l_bound_align_image(&mf->width, S5K6A3_SENSOR_MIN_WIDTH, + S5K6A3_SENSOR_MAX_WIDTH, 0, + &mf->height, S5K6A3_SENSOR_MIN_HEIGHT, + S5K6A3_SENSOR_MAX_HEIGHT, 0, 0); +} + +static struct v4l2_mbus_framefmt *__s5k6a3_get_format( + struct s5k6a3 *sensor, struct v4l2_subdev_fh *fh, + u32 pad, enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return fh ? v4l2_subdev_get_try_format(fh, pad) : NULL; + + return &sensor->format; +} + +static int s5k6a3_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct s5k6a3 *sensor = sd_to_s5k6a3(sd); + struct v4l2_mbus_framefmt *mf; + + s5k6a3_try_format(&fmt->format); + + mf = __s5k6a3_get_format(sensor, fh, fmt->pad, fmt->which); + if (mf) { + mutex_lock(&sensor->lock); + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) + *mf = fmt->format; + mutex_unlock(&sensor->lock); + } + return 0; +} + +static int s5k6a3_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct s5k6a3 *sensor = sd_to_s5k6a3(sd); + struct v4l2_mbus_framefmt *mf; + + mf = __s5k6a3_get_format(sensor, fh, fmt->pad, fmt->which); + + mutex_lock(&sensor->lock); + fmt->format = *mf; + mutex_unlock(&sensor->lock); + return 0; +} + +static struct v4l2_subdev_pad_ops s5k6a3_pad_ops = { + .enum_mbus_code = s5k6a3_enum_mbus_code, + .get_fmt = s5k6a3_get_fmt, + .set_fmt = s5k6a3_set_fmt, +}; + +static int s5k6a3_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0); + + *format = s5k6a3_formats[0]; + format->width = S5K6A3_DEFAULT_WIDTH; + format->height = S5K6A3_DEFAULT_HEIGHT; + + return 0; +} + +static const struct v4l2_subdev_internal_ops s5k6a3_sd_internal_ops = { + .open = s5k6a3_open, +}; + +static int __s5k6a3_power_on(struct s5k6a3 *sensor) +{ + int i = S5K6A3_SUPP_VDDA; + int ret; + + ret = clk_set_rate(sensor->clock, sensor->clock_frequency); + if (ret < 0) + return ret; + + ret = pm_runtime_get(sensor->dev); + if (ret < 0) + return ret; + + ret = regulator_enable(sensor->supplies[i].consumer); + if (ret < 0) + goto error_rpm_put; + + ret = clk_prepare_enable(sensor->clock); + if (ret < 0) + goto error_reg_dis; + + for (i++; i < S5K6A3_NUM_SUPPLIES; i++) { + ret = regulator_enable(sensor->supplies[i].consumer); + if (ret < 0) + goto error_reg_dis; + } + + gpio_set_value(sensor->gpio_reset, 1); + usleep_range(600, 800); + gpio_set_value(sensor->gpio_reset, 0); + usleep_range(600, 800); + gpio_set_value(sensor->gpio_reset, 1); + + /* Delay needed for the sensor initialization */ + msleep(20); + return 0; + +error_reg_dis: + for (--i; i >= 0; --i) + regulator_disable(sensor->supplies[i].consumer); +error_rpm_put: + pm_runtime_put(sensor->dev); + return ret; +} + +static int __s5k6a3_power_off(struct s5k6a3 *sensor) +{ + int i; + + gpio_set_value(sensor->gpio_reset, 0); + + for (i = S5K6A3_NUM_SUPPLIES - 1; i >= 0; i--) + regulator_disable(sensor->supplies[i].consumer); + + clk_disable_unprepare(sensor->clock); + pm_runtime_put(sensor->dev); + return 0; +} + +static int s5k6a3_s_power(struct v4l2_subdev *sd, int on) +{ + struct s5k6a3 *sensor = sd_to_s5k6a3(sd); + int ret = 0; + + mutex_lock(&sensor->lock); + + if (sensor->power_count == !on) { + if (on) + ret = __s5k6a3_power_on(sensor); + else + ret = __s5k6a3_power_off(sensor); + + if (ret == 0) + sensor->power_count += on ? 1 : -1; + } + + mutex_unlock(&sensor->lock); + return ret; +} + +static struct v4l2_subdev_core_ops s5k6a3_core_ops = { + .s_power = s5k6a3_s_power, +}; + +static struct v4l2_subdev_ops s5k6a3_subdev_ops = { + .core = &s5k6a3_core_ops, + .pad = &s5k6a3_pad_ops, +}; + +static int s5k6a3_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct s5k6a3 *sensor; + struct v4l2_subdev *sd; + int gpio, i, ret; + + sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); + if (!sensor) + return -ENOMEM; + + mutex_init(&sensor->lock); + sensor->gpio_reset = -EINVAL; + sensor->clock = ERR_PTR(-EINVAL); + sensor->dev = dev; + + sensor->clock = devm_clk_get(sensor->dev, S5K6A3_CLK_NAME); + if (IS_ERR(sensor->clock)) + return PTR_ERR(sensor->clock); + + gpio = of_get_gpio_flags(dev->of_node, 0, NULL); + if (!gpio_is_valid(gpio)) + return gpio; + + ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_LOW, + S5K6A3_DRV_NAME); + if (ret < 0) + return ret; + + sensor->gpio_reset = gpio; + + if (of_property_read_u32(dev->of_node, "clock-frequency", + &sensor->clock_frequency)) { + sensor->clock_frequency = S5K6A3_DEFAULT_CLK_FREQ; + dev_info(dev, "using default %u Hz clock frequency\n", + sensor->clock_frequency); + } + + for (i = 0; i < S5K6A3_NUM_SUPPLIES; i++) + sensor->supplies[i].supply = s5k6a3_supply_names[i]; + + ret = devm_regulator_bulk_get(&client->dev, S5K6A3_NUM_SUPPLIES, + sensor->supplies); + if (ret < 0) + return ret; + + sd = &sensor->subdev; + v4l2_i2c_subdev_init(sd, client, &s5k6a3_subdev_ops); + sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + sd->internal_ops = &s5k6a3_sd_internal_ops; + + sensor->format.code = s5k6a3_formats[0].code; + sensor->format.width = S5K6A3_DEFAULT_WIDTH; + sensor->format.height = S5K6A3_DEFAULT_HEIGHT; + + sensor->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&sd->entity, 1, &sensor->pad, 0); + if (ret < 0) + return ret; + + pm_runtime_no_callbacks(dev); + pm_runtime_enable(dev); + + ret = v4l2_async_register_subdev(sd); + + if (ret < 0) { + pm_runtime_disable(&client->dev); + media_entity_cleanup(&sd->entity); + } + + return ret; +} + +static int s5k6a3_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + + pm_runtime_disable(&client->dev); + v4l2_async_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); + return 0; +} + +static const struct i2c_device_id s5k6a3_ids[] = { + { } +}; + +#ifdef CONFIG_OF +static const struct of_device_id s5k6a3_of_match[] = { + { .compatible = "samsung,s5k6a3" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, s5k6a3_of_match); +#endif + +static struct i2c_driver s5k6a3_driver = { + .driver = { + .of_match_table = of_match_ptr(s5k6a3_of_match), + .name = S5K6A3_DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = s5k6a3_probe, + .remove = s5k6a3_remove, + .id_table = s5k6a3_ids, +}; + +module_i2c_driver(s5k6a3_driver); + +MODULE_DESCRIPTION("S5K6A3 image sensor subdev driver"); +MODULE_AUTHOR("Sylwester Nawrocki "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-70-g09d2 From bce6744deb6dda6419f58eb90854d901bf937d44 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 20 Dec 2013 19:46:44 -0300 Subject: [media] V4L: s5c73m3: Add device tree support This patch adds the V4L2 asynchronous subdev registration and device tree support. Common clock API is used to control the sensor master clock from within the subdev. Signed-off-by: Andrzej Hajda Signed-off-by: Sylwester Nawrocki Acked-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/s5c73m3/s5c73m3-core.c | 207 +++++++++++++++++++++++-------- drivers/media/i2c/s5c73m3/s5c73m3-spi.c | 6 + drivers/media/i2c/s5c73m3/s5c73m3.h | 4 + 3 files changed, 167 insertions(+), 50 deletions(-) diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c index e7f555cc827..a4459301b5f 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c +++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c @@ -15,7 +15,7 @@ * GNU General Public License for more details. */ -#include +#include #include #include #include @@ -23,7 +23,9 @@ #include #include #include +#include #include +#include #include #include #include @@ -33,6 +35,7 @@ #include #include #include +#include #include "s5c73m3.h" @@ -46,6 +49,8 @@ static int update_fw; module_param(update_fw, int, 0644); #define S5C73M3_EMBEDDED_DATA_MAXLEN SZ_4K +#define S5C73M3_MIPI_DATA_LANES 4 +#define S5C73M3_CLK_NAME "cis_extclk" static const char * const s5c73m3_supply_names[S5C73M3_MAX_SUPPLIES] = { "vdd-int", /* Digital Core supply (1.2V), CAM_ISP_CORE_1.2V */ @@ -1355,9 +1360,20 @@ static int __s5c73m3_power_on(struct s5c73m3 *state) for (i = 0; i < S5C73M3_MAX_SUPPLIES; i++) { ret = regulator_enable(state->supplies[i].consumer); if (ret) - goto err; + goto err_reg_dis; } + ret = clk_set_rate(state->clock, state->mclk_frequency); + if (ret < 0) + goto err_reg_dis; + + ret = clk_prepare_enable(state->clock); + if (ret < 0) + goto err_reg_dis; + + v4l2_dbg(1, s5c73m3_dbg, &state->oif_sd, "clock frequency: %ld\n", + clk_get_rate(state->clock)); + s5c73m3_gpio_deassert(state, STBY); usleep_range(100, 200); @@ -1365,7 +1381,8 @@ static int __s5c73m3_power_on(struct s5c73m3 *state) usleep_range(50, 100); return 0; -err: + +err_reg_dis: for (--i; i >= 0; i--) regulator_disable(state->supplies[i].consumer); return ret; @@ -1380,6 +1397,9 @@ static int __s5c73m3_power_off(struct s5c73m3 *state) if (s5c73m3_gpio_assert(state, STBY)) usleep_range(100, 200); + + clk_disable_unprepare(state->clock); + state->streaming = 0; state->isp_ready = 0; @@ -1388,6 +1408,7 @@ static int __s5c73m3_power_off(struct s5c73m3 *state) if (ret) goto err; } + return 0; err: for (++i; i < S5C73M3_MAX_SUPPLIES; i++) { @@ -1396,6 +1417,8 @@ err: v4l2_err(&state->oif_sd, "Failed to reenable %s: %d\n", state->supplies[i].supply, r); } + + clk_prepare_enable(state->clock); return ret; } @@ -1451,17 +1474,6 @@ static int s5c73m3_oif_registered(struct v4l2_subdev *sd) S5C73M3_JPEG_PAD, &state->oif_sd.entity, OIF_JPEG_PAD, MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED); - mutex_lock(&state->lock); - ret = __s5c73m3_power_on(state); - if (ret == 0) - s5c73m3_get_fw_version(state); - - __s5c73m3_power_off(state); - mutex_unlock(&state->lock); - - v4l2_dbg(1, s5c73m3_dbg, sd, "%s: Booting %s (%d)\n", - __func__, ret ? "failed" : "succeeded", ret); - return ret; } @@ -1519,41 +1531,112 @@ static const struct v4l2_subdev_ops oif_subdev_ops = { .video = &s5c73m3_oif_video_ops, }; -static int s5c73m3_configure_gpios(struct s5c73m3 *state, - const struct s5c73m3_platform_data *pdata) +static int s5c73m3_configure_gpios(struct s5c73m3 *state) +{ + static const char * const gpio_names[] = { + "S5C73M3_STBY", "S5C73M3_RST" + }; + struct i2c_client *c = state->i2c_client; + struct s5c73m3_gpio *g = state->gpio; + int ret, i; + + for (i = 0; i < GPIO_NUM; ++i) { + unsigned int flags = GPIOF_DIR_OUT; + if (g[i].level) + flags |= GPIOF_INIT_HIGH; + ret = devm_gpio_request_one(&c->dev, g[i].gpio, flags, + gpio_names[i]); + if (ret) { + v4l2_err(c, "failed to request gpio %s\n", + gpio_names[i]); + return ret; + } + } + return 0; +} + +static int s5c73m3_parse_gpios(struct s5c73m3 *state) +{ + static const char * const prop_names[] = { + "standby-gpios", "xshutdown-gpios", + }; + struct device *dev = &state->i2c_client->dev; + struct device_node *node = dev->of_node; + int ret, i; + + for (i = 0; i < GPIO_NUM; ++i) { + enum of_gpio_flags of_flags; + + ret = of_get_named_gpio_flags(node, prop_names[i], + 0, &of_flags); + if (ret < 0) { + dev_err(dev, "failed to parse %s DT property\n", + prop_names[i]); + return -EINVAL; + } + state->gpio[i].gpio = ret; + state->gpio[i].level = !(of_flags & OF_GPIO_ACTIVE_LOW); + } + return 0; +} + +static int s5c73m3_get_platform_data(struct s5c73m3 *state) { struct device *dev = &state->i2c_client->dev; - const struct s5c73m3_gpio *gpio; - unsigned long flags; + const struct s5c73m3_platform_data *pdata = dev->platform_data; + struct device_node *node = dev->of_node; + struct device_node *node_ep; + struct v4l2_of_endpoint ep; int ret; - state->gpio[STBY].gpio = -EINVAL; - state->gpio[RST].gpio = -EINVAL; + if (!node) { + if (!pdata) { + dev_err(dev, "Platform data not specified\n"); + return -EINVAL; + } - gpio = &pdata->gpio_stby; - if (gpio_is_valid(gpio->gpio)) { - flags = (gpio->level ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW) - | GPIOF_EXPORT; - ret = devm_gpio_request_one(dev, gpio->gpio, flags, - "S5C73M3_STBY"); - if (ret < 0) - return ret; + state->mclk_frequency = pdata->mclk_frequency; + state->gpio[STBY] = pdata->gpio_stby; + state->gpio[RST] = pdata->gpio_reset; + return 0; + } + + state->clock = devm_clk_get(dev, S5C73M3_CLK_NAME); + if (IS_ERR(state->clock)) + return PTR_ERR(state->clock); - state->gpio[STBY] = *gpio; + if (of_property_read_u32(node, "clock-frequency", + &state->mclk_frequency)) { + state->mclk_frequency = S5C73M3_DEFAULT_MCLK_FREQ; + dev_info(dev, "using default %u Hz clock frequency\n", + state->mclk_frequency); } - gpio = &pdata->gpio_reset; - if (gpio_is_valid(gpio->gpio)) { - flags = (gpio->level ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW) - | GPIOF_EXPORT; - ret = devm_gpio_request_one(dev, gpio->gpio, flags, - "S5C73M3_RST"); - if (ret < 0) - return ret; + ret = s5c73m3_parse_gpios(state); + if (ret < 0) + return -EINVAL; - state->gpio[RST] = *gpio; + node_ep = v4l2_of_get_next_endpoint(node, NULL); + if (!node_ep) { + dev_warn(dev, "no endpoint defined for node: %s\n", + node->full_name); + return 0; } + v4l2_of_parse_endpoint(node_ep, &ep); + of_node_put(node_ep); + + if (ep.bus_type != V4L2_MBUS_CSI2) { + dev_err(dev, "unsupported bus type\n"); + return -EINVAL; + } + /* + * Number of MIPI CSI-2 data lanes is currently not configurable, + * always a default value of 4 lanes is used. + */ + if (ep.bus.mipi_csi2.num_data_lanes != S5C73M3_MIPI_DATA_LANES) + dev_info(dev, "falling back to 4 MIPI CSI-2 data lanes\n"); + return 0; } @@ -1561,21 +1644,20 @@ static int s5c73m3_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device *dev = &client->dev; - const struct s5c73m3_platform_data *pdata = client->dev.platform_data; struct v4l2_subdev *sd; struct v4l2_subdev *oif_sd; struct s5c73m3 *state; int ret, i; - if (pdata == NULL) { - dev_err(&client->dev, "Platform data not specified\n"); - return -EINVAL; - } - state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL); if (!state) return -ENOMEM; + state->i2c_client = client; + ret = s5c73m3_get_platform_data(state); + if (ret < 0) + return ret; + mutex_init(&state->lock); sd = &state->sensor_sd; oif_sd = &state->oif_sd; @@ -1613,11 +1695,7 @@ static int s5c73m3_probe(struct i2c_client *client, if (ret < 0) return ret; - state->mclk_frequency = pdata->mclk_frequency; - state->bus_type = pdata->bus_type; - state->i2c_client = client; - - ret = s5c73m3_configure_gpios(state, pdata); + ret = s5c73m3_configure_gpios(state); if (ret) goto out_err; @@ -1651,9 +1729,29 @@ static int s5c73m3_probe(struct i2c_client *client, if (ret < 0) goto out_err; + oif_sd->dev = dev; + + ret = __s5c73m3_power_on(state); + if (ret < 0) + goto out_err1; + + ret = s5c73m3_get_fw_version(state); + __s5c73m3_power_off(state); + + if (ret < 0) { + dev_err(dev, "Device detection failed: %d\n", ret); + goto out_err1; + } + + ret = v4l2_async_register_subdev(oif_sd); + if (ret < 0) + goto out_err1; + v4l2_info(sd, "%s: completed successfully\n", __func__); return 0; +out_err1: + s5c73m3_unregister_spi_driver(state); out_err: media_entity_cleanup(&sd->entity); return ret; @@ -1665,7 +1763,7 @@ static int s5c73m3_remove(struct i2c_client *client) struct s5c73m3 *state = oif_sd_to_s5c73m3(oif_sd); struct v4l2_subdev *sensor_sd = &state->sensor_sd; - v4l2_device_unregister_subdev(oif_sd); + v4l2_async_unregister_subdev(oif_sd); v4l2_ctrl_handler_free(oif_sd->ctrl_handler); media_entity_cleanup(&oif_sd->entity); @@ -1684,8 +1782,17 @@ static const struct i2c_device_id s5c73m3_id[] = { }; MODULE_DEVICE_TABLE(i2c, s5c73m3_id); +#ifdef CONFIG_OF +static const struct of_device_id s5c73m3_of_match[] = { + { .compatible = "samsung,s5c73m3" }, + { } +}; +MODULE_DEVICE_TABLE(of, s5c73m3_of_match); +#endif + static struct i2c_driver s5c73m3_i2c_driver = { .driver = { + .of_match_table = of_match_ptr(s5c73m3_of_match), .name = DRIVER_NAME, }, .probe = s5c73m3_probe, diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-spi.c b/drivers/media/i2c/s5c73m3/s5c73m3-spi.c index 8079e26eb5e..f60b265b4da 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3-spi.c +++ b/drivers/media/i2c/s5c73m3/s5c73m3-spi.c @@ -27,6 +27,11 @@ #define S5C73M3_SPI_DRV_NAME "S5C73M3-SPI" +static const struct of_device_id s5c73m3_spi_ids[] = { + { .compatible = "samsung,s5c73m3" }, + { } +}; + enum spi_direction { SPI_DIR_RX, SPI_DIR_TX @@ -146,6 +151,7 @@ int s5c73m3_register_spi_driver(struct s5c73m3 *state) spidrv->driver.name = S5C73M3_SPI_DRV_NAME; spidrv->driver.bus = &spi_bus_type; spidrv->driver.owner = THIS_MODULE; + spidrv->driver.of_match_table = s5c73m3_spi_ids; return spi_register_driver(spidrv); } diff --git a/drivers/media/i2c/s5c73m3/s5c73m3.h b/drivers/media/i2c/s5c73m3/s5c73m3.h index 9dfa516f694..9656b6723dc 100644 --- a/drivers/media/i2c/s5c73m3/s5c73m3.h +++ b/drivers/media/i2c/s5c73m3/s5c73m3.h @@ -17,6 +17,7 @@ #ifndef S5C73M3_H_ #define S5C73M3_H_ +#include #include #include #include @@ -321,6 +322,7 @@ enum s5c73m3_oif_pads { #define S5C73M3_MAX_SUPPLIES 6 +#define S5C73M3_DEFAULT_MCLK_FREQ 24000000U struct s5c73m3_ctrls { struct v4l2_ctrl_handler handler; @@ -391,6 +393,8 @@ struct s5c73m3 { struct regulator_bulk_data supplies[S5C73M3_MAX_SUPPLIES]; struct s5c73m3_gpio gpio[GPIO_NUM]; + struct clk *clock; + /* External master clock frequency */ u32 mclk_frequency; /* Video bus type - MIPI-CSI2/parallel */ -- cgit v1.2.3-70-g09d2 From d265d9ac6c7c3201f0fea737cdf9c74e50415178 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 19 Jul 2013 11:35:11 -0300 Subject: [media] exynos4-is: Use external s5k6a3 sensor driver This patch removes the common fimc-is-sensor driver for image sensors that are normally controlled by the FIMC-IS firmware. The FIMC-IS driver now contains only a table of properties specific to each sensor. The sensor properties required for the ISP's firmware are parsed from device tree and retrieved from the internal table, which is selected based on the compatible property of an image sensor. To use the Exynos4x12 internal ISP the S5K6A3 sensor driver (drivers/ media/i2c/s5k6a3.c) is now required. Signed-off-by: Sylwester Nawrocki Acked-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/exynos4-is/fimc-is-regs.c | 2 +- drivers/media/platform/exynos4-is/fimc-is-sensor.c | 285 +-------------------- drivers/media/platform/exynos4-is/fimc-is-sensor.h | 49 +--- drivers/media/platform/exynos4-is/fimc-is.c | 97 +++---- drivers/media/platform/exynos4-is/fimc-is.h | 4 +- 5 files changed, 57 insertions(+), 380 deletions(-) diff --git a/drivers/media/platform/exynos4-is/fimc-is-regs.c b/drivers/media/platform/exynos4-is/fimc-is-regs.c index 2628733c4e1..5c7bd2ac40d 100644 --- a/drivers/media/platform/exynos4-is/fimc-is-regs.c +++ b/drivers/media/platform/exynos4-is/fimc-is-regs.c @@ -112,7 +112,7 @@ void fimc_is_hw_set_sensor_num(struct fimc_is *is) mcuctl_write(IH_REPLY_DONE, is, MCUCTL_REG_ISSR(0)); mcuctl_write(is->sensor_index, is, MCUCTL_REG_ISSR(1)); mcuctl_write(IHC_GET_SENSOR_NUM, is, MCUCTL_REG_ISSR(2)); - mcuctl_write(FIMC_IS_SENSOR_NUM, is, MCUCTL_REG_ISSR(3)); + mcuctl_write(FIMC_IS_SENSORS_NUM, is, MCUCTL_REG_ISSR(3)); } void fimc_is_hw_close_sensor(struct fimc_is *is, unsigned int index) diff --git a/drivers/media/platform/exynos4-is/fimc-is-sensor.c b/drivers/media/platform/exynos4-is/fimc-is-sensor.c index 6647421e5d3..10e82e21b5d 100644 --- a/drivers/media/platform/exynos4-is/fimc-is-sensor.c +++ b/drivers/media/platform/exynos4-is/fimc-is-sensor.c @@ -2,276 +2,21 @@ * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver * * Copyright (C) 2013 Samsung Electronics Co., Ltd. - * * Author: Sylwester Nawrocki * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "fimc-is.h" #include "fimc-is-sensor.h" -#define DRIVER_NAME "FIMC-IS-SENSOR" - -static const char * const sensor_supply_names[] = { - "svdda", - "svddio", -}; - -static const struct v4l2_mbus_framefmt fimc_is_sensor_formats[] = { - { - .code = V4L2_MBUS_FMT_SGRBG10_1X10, - .colorspace = V4L2_COLORSPACE_SRGB, - .field = V4L2_FIELD_NONE, - } -}; - -static const struct v4l2_mbus_framefmt *find_sensor_format( - struct v4l2_mbus_framefmt *mf) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(fimc_is_sensor_formats); i++) - if (mf->code == fimc_is_sensor_formats[i].code) - return &fimc_is_sensor_formats[i]; - - return &fimc_is_sensor_formats[0]; -} - -static int fimc_is_sensor_enum_mbus_code(struct v4l2_subdev *sd, - struct v4l2_subdev_fh *fh, - struct v4l2_subdev_mbus_code_enum *code) -{ - if (code->index >= ARRAY_SIZE(fimc_is_sensor_formats)) - return -EINVAL; - - code->code = fimc_is_sensor_formats[code->index].code; - return 0; -} - -static void fimc_is_sensor_try_format(struct fimc_is_sensor *sensor, - struct v4l2_mbus_framefmt *mf) -{ - const struct sensor_drv_data *dd = sensor->drvdata; - const struct v4l2_mbus_framefmt *fmt; - - fmt = find_sensor_format(mf); - mf->code = fmt->code; - v4l_bound_align_image(&mf->width, 16 + 8, dd->width, 0, - &mf->height, 12 + 8, dd->height, 0, 0); -} - -static struct v4l2_mbus_framefmt *__fimc_is_sensor_get_format( - struct fimc_is_sensor *sensor, struct v4l2_subdev_fh *fh, - u32 pad, enum v4l2_subdev_format_whence which) -{ - if (which == V4L2_SUBDEV_FORMAT_TRY) - return fh ? v4l2_subdev_get_try_format(fh, pad) : NULL; - - return &sensor->format; -} - -static int fimc_is_sensor_set_fmt(struct v4l2_subdev *sd, - struct v4l2_subdev_fh *fh, - struct v4l2_subdev_format *fmt) -{ - struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd); - struct v4l2_mbus_framefmt *mf; - - fimc_is_sensor_try_format(sensor, &fmt->format); - - mf = __fimc_is_sensor_get_format(sensor, fh, fmt->pad, fmt->which); - if (mf) { - mutex_lock(&sensor->lock); - if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) - *mf = fmt->format; - mutex_unlock(&sensor->lock); - } - return 0; -} - -static int fimc_is_sensor_get_fmt(struct v4l2_subdev *sd, - struct v4l2_subdev_fh *fh, - struct v4l2_subdev_format *fmt) -{ - struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd); - struct v4l2_mbus_framefmt *mf; - - mf = __fimc_is_sensor_get_format(sensor, fh, fmt->pad, fmt->which); - - mutex_lock(&sensor->lock); - fmt->format = *mf; - mutex_unlock(&sensor->lock); - return 0; -} - -static struct v4l2_subdev_pad_ops fimc_is_sensor_pad_ops = { - .enum_mbus_code = fimc_is_sensor_enum_mbus_code, - .get_fmt = fimc_is_sensor_get_fmt, - .set_fmt = fimc_is_sensor_set_fmt, -}; - -static int fimc_is_sensor_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) -{ - struct v4l2_mbus_framefmt *format = v4l2_subdev_get_try_format(fh, 0); - - *format = fimc_is_sensor_formats[0]; - format->width = FIMC_IS_SENSOR_DEF_PIX_WIDTH; - format->height = FIMC_IS_SENSOR_DEF_PIX_HEIGHT; - - return 0; -} - -static const struct v4l2_subdev_internal_ops fimc_is_sensor_sd_internal_ops = { - .open = fimc_is_sensor_open, -}; - -static int fimc_is_sensor_s_power(struct v4l2_subdev *sd, int on) -{ - struct fimc_is_sensor *sensor = sd_to_fimc_is_sensor(sd); - int gpio = sensor->gpio_reset; - int ret; - - if (on) { - ret = pm_runtime_get(sensor->dev); - if (ret < 0) - return ret; - - ret = regulator_bulk_enable(SENSOR_NUM_SUPPLIES, - sensor->supplies); - if (ret < 0) { - pm_runtime_put(sensor->dev); - return ret; - } - if (gpio_is_valid(gpio)) { - gpio_set_value(gpio, 1); - usleep_range(600, 800); - gpio_set_value(gpio, 0); - usleep_range(10000, 11000); - gpio_set_value(gpio, 1); - } - - /* A delay needed for the sensor initialization. */ - msleep(20); - } else { - if (gpio_is_valid(gpio)) - gpio_set_value(gpio, 0); - - ret = regulator_bulk_disable(SENSOR_NUM_SUPPLIES, - sensor->supplies); - if (!ret) - pm_runtime_put(sensor->dev); - } - - pr_info("%s:%d: on: %d, ret: %d\n", __func__, __LINE__, on, ret); - - return ret; -} - -static struct v4l2_subdev_core_ops fimc_is_sensor_core_ops = { - .s_power = fimc_is_sensor_s_power, -}; - -static struct v4l2_subdev_ops fimc_is_sensor_subdev_ops = { - .core = &fimc_is_sensor_core_ops, - .pad = &fimc_is_sensor_pad_ops, -}; - -static const struct of_device_id fimc_is_sensor_of_match[]; - -static int fimc_is_sensor_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct device *dev = &client->dev; - struct fimc_is_sensor *sensor; - const struct of_device_id *of_id; - struct v4l2_subdev *sd; - int gpio, i, ret; - - sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); - if (!sensor) - return -ENOMEM; - - mutex_init(&sensor->lock); - sensor->gpio_reset = -EINVAL; - - gpio = of_get_gpio_flags(dev->of_node, 0, NULL); - if (gpio_is_valid(gpio)) { - ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_LOW, - DRIVER_NAME); - if (ret < 0) - return ret; - } - sensor->gpio_reset = gpio; - - for (i = 0; i < SENSOR_NUM_SUPPLIES; i++) - sensor->supplies[i].supply = sensor_supply_names[i]; - - ret = devm_regulator_bulk_get(&client->dev, SENSOR_NUM_SUPPLIES, - sensor->supplies); - if (ret < 0) - return ret; - - of_id = of_match_node(fimc_is_sensor_of_match, dev->of_node); - if (!of_id) - return -ENODEV; - - sensor->drvdata = of_id->data; - sensor->dev = dev; - - sd = &sensor->subdev; - v4l2_i2c_subdev_init(sd, client, &fimc_is_sensor_subdev_ops); - snprintf(sd->name, sizeof(sd->name), sensor->drvdata->subdev_name); - sensor->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; - - sensor->format.code = fimc_is_sensor_formats[0].code; - sensor->format.width = FIMC_IS_SENSOR_DEF_PIX_WIDTH; - sensor->format.height = FIMC_IS_SENSOR_DEF_PIX_HEIGHT; - - sensor->pad.flags = MEDIA_PAD_FL_SOURCE; - ret = media_entity_init(&sd->entity, 1, &sensor->pad, 0); - if (ret < 0) - return ret; - - pm_runtime_no_callbacks(dev); - pm_runtime_enable(dev); - - return ret; -} - -static int fimc_is_sensor_remove(struct i2c_client *client) -{ - struct v4l2_subdev *sd = i2c_get_clientdata(client); - media_entity_cleanup(&sd->entity); - return 0; -} - -static const struct i2c_device_id fimc_is_sensor_ids[] = { - { } -}; - static const struct sensor_drv_data s5k6a3_drvdata = { .id = FIMC_IS_SENSOR_ID_S5K6A3, - .subdev_name = "S5K6A3", - .width = S5K6A3_SENSOR_WIDTH, - .height = S5K6A3_SENSOR_HEIGHT, + .open_timeout = S5K6A3_OPEN_TIMEOUT, }; -static const struct of_device_id fimc_is_sensor_of_match[] = { +static const struct of_device_id fimc_is_sensor_of_ids[] = { { .compatible = "samsung,s5k6a3", .data = &s5k6a3_drvdata, @@ -279,27 +24,11 @@ static const struct of_device_id fimc_is_sensor_of_match[] = { { } }; -static struct i2c_driver fimc_is_sensor_driver = { - .driver = { - .of_match_table = fimc_is_sensor_of_match, - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, - .probe = fimc_is_sensor_probe, - .remove = fimc_is_sensor_remove, - .id_table = fimc_is_sensor_ids, -}; - -int fimc_is_register_sensor_driver(void) +const struct sensor_drv_data *fimc_is_sensor_get_drvdata( + struct device_node *node) { - return i2c_add_driver(&fimc_is_sensor_driver); -} + const struct of_device_id *of_id; -void fimc_is_unregister_sensor_driver(void) -{ - i2c_del_driver(&fimc_is_sensor_driver); + of_id = of_match_node(fimc_is_sensor_of_ids, node); + return of_id ? of_id->data : NULL; } - -MODULE_AUTHOR("Sylwester Nawrocki "); -MODULE_DESCRIPTION("Exynos4x12 FIMC-IS image sensor subdev driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/exynos4-is/fimc-is-sensor.h b/drivers/media/platform/exynos4-is/fimc-is-sensor.h index 6036d49a6c6..173ccffa4bc 100644 --- a/drivers/media/platform/exynos4-is/fimc-is-sensor.h +++ b/drivers/media/platform/exynos4-is/fimc-is-sensor.h @@ -13,24 +13,13 @@ #ifndef FIMC_IS_SENSOR_H_ #define FIMC_IS_SENSOR_H_ -#include -#include -#include -#include -#include -#include -#include - -#define FIMC_IS_SENSOR_OPEN_TIMEOUT 2000 /* ms */ - -#define FIMC_IS_SENSOR_DEF_PIX_WIDTH 1296 -#define FIMC_IS_SENSOR_DEF_PIX_HEIGHT 732 +#include +#include +#define S5K6A3_OPEN_TIMEOUT 2000 /* ms */ #define S5K6A3_SENSOR_WIDTH 1392 #define S5K6A3_SENSOR_HEIGHT 1392 -#define SENSOR_NUM_SUPPLIES 2 - enum fimc_is_sensor_id { FIMC_IS_SENSOR_ID_S5K3H2 = 1, FIMC_IS_SENSOR_ID_S5K6A3, @@ -45,45 +34,23 @@ enum fimc_is_sensor_id { struct sensor_drv_data { enum fimc_is_sensor_id id; - const char * const subdev_name; - unsigned int width; - unsigned int height; + /* sensor open timeout in ms */ + unsigned short open_timeout; }; /** * struct fimc_is_sensor - fimc-is sensor data structure - * @dev: pointer to this I2C client device structure - * @subdev: the image sensor's v4l2 subdev - * @pad: subdev media source pad - * @supplies: image sensor's voltage regulator supplies - * @gpio_reset: GPIO connected to the sensor's reset pin * @drvdata: a pointer to the sensor's parameters data structure * @i2c_bus: ISP I2C bus index (0...1) * @test_pattern: true to enable video test pattern - * @lock: mutex protecting the structure's members below - * @format: media bus format at the sensor's source pad */ struct fimc_is_sensor { - struct device *dev; - struct v4l2_subdev subdev; - struct media_pad pad; - struct regulator_bulk_data supplies[SENSOR_NUM_SUPPLIES]; - int gpio_reset; const struct sensor_drv_data *drvdata; unsigned int i2c_bus; - bool test_pattern; - - struct mutex lock; - struct v4l2_mbus_framefmt format; + u8 test_pattern; }; -static inline -struct fimc_is_sensor *sd_to_fimc_is_sensor(struct v4l2_subdev *sd) -{ - return container_of(sd, struct fimc_is_sensor, subdev); -} - -int fimc_is_register_sensor_driver(void); -void fimc_is_unregister_sensor_driver(void); +const struct sensor_drv_data *fimc_is_sensor_get_drvdata( + struct device_node *node); #endif /* FIMC_IS_SENSOR_H_ */ diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c index 13a4228952e..a8f58451e26 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.c +++ b/drivers/media/platform/exynos4-is/fimc-is.c @@ -161,78 +161,66 @@ static void fimc_is_disable_clocks(struct fimc_is *is) } } -static int fimc_is_parse_sensor_config(struct fimc_is_sensor *sensor, - struct device_node *np) +static int fimc_is_parse_sensor_config(struct fimc_is *is, unsigned int index, + struct device_node *node) { + struct fimc_is_sensor *sensor = &is->sensor[index]; u32 tmp = 0; int ret; - np = v4l2_of_get_next_endpoint(np, NULL); - if (!np) + sensor->drvdata = fimc_is_sensor_get_drvdata(node); + if (!sensor->drvdata) { + dev_err(&is->pdev->dev, "no driver data found for: %s\n", + node->full_name); + return -EINVAL; + } + + node = v4l2_of_get_next_endpoint(node, NULL); + if (!node) return -ENXIO; - np = v4l2_of_get_remote_port(np); - if (!np) + + node = v4l2_of_get_remote_port(node); + if (!node) return -ENXIO; /* Use MIPI-CSIS channel id to determine the ISP I2C bus index. */ - ret = of_property_read_u32(np, "reg", &tmp); - sensor->i2c_bus = tmp - FIMC_INPUT_MIPI_CSI2_0; + ret = of_property_read_u32(node, "reg", &tmp); + if (ret < 0) { + dev_err(&is->pdev->dev, "reg property not found at: %s\n", + node->full_name); + return ret; + } - return ret; + sensor->i2c_bus = tmp - FIMC_INPUT_MIPI_CSI2_0; + return 0; } static int fimc_is_register_subdevs(struct fimc_is *is) { - struct device_node *adapter, *child; - int ret; + struct device_node *i2c_bus, *child; + int ret, index = 0; ret = fimc_isp_subdev_create(&is->isp); if (ret < 0) return ret; - for_each_compatible_node(adapter, NULL, FIMC_IS_I2C_COMPATIBLE) { - if (!of_find_device_by_node(adapter)) { - of_node_put(adapter); - return -EPROBE_DEFER; - } + for_each_compatible_node(i2c_bus, NULL, FIMC_IS_I2C_COMPATIBLE) { + for_each_available_child_of_node(i2c_bus, child) { + ret = fimc_is_parse_sensor_config(is, index, child); - for_each_available_child_of_node(adapter, child) { - struct i2c_client *client; - struct v4l2_subdev *sd; - - client = of_find_i2c_device_by_node(child); - if (!client) - goto e_retry; - - sd = i2c_get_clientdata(client); - if (!sd) - goto e_retry; - - /* FIXME: Add support for multiple sensors. */ - if (WARN_ON(is->sensor)) - continue; - - is->sensor = sd_to_fimc_is_sensor(sd); - - if (fimc_is_parse_sensor_config(is->sensor, child)) { - dev_warn(&is->pdev->dev, "DT parse error: %s\n", - child->full_name); + if (ret < 0 || index >= FIMC_IS_SENSORS_NUM) { + of_node_put(child); + return ret; } - pr_debug("%s(): registered subdev: %p\n", - __func__, sd->name); + index++; } } return 0; - -e_retry: - of_node_put(child); - return -EPROBE_DEFER; } static int fimc_is_unregister_subdevs(struct fimc_is *is) { fimc_isp_subdev_destroy(&is->isp); - is->sensor = NULL; return 0; } @@ -647,7 +635,7 @@ static int fimc_is_hw_open_sensor(struct fimc_is *is, fimc_is_hw_set_intgr0_gd0(is); return fimc_is_wait_event(is, IS_ST_OPEN_SENSOR, 1, - FIMC_IS_SENSOR_OPEN_TIMEOUT); + sensor->drvdata->open_timeout); } @@ -661,8 +649,8 @@ int fimc_is_hw_initialize(struct fimc_is *is) u32 prev_id; int i, ret; - /* Sensor initialization. */ - ret = fimc_is_hw_open_sensor(is, is->sensor); + /* Sensor initialization. Only one sensor is currently supported. */ + ret = fimc_is_hw_open_sensor(is, &is->sensor[0]); if (ret < 0) return ret; @@ -977,27 +965,20 @@ static int fimc_is_module_init(void) { int ret; - ret = fimc_is_register_sensor_driver(); - if (ret < 0) - return ret; - ret = fimc_is_register_i2c_driver(); if (ret < 0) - goto err_sens; + return ret; ret = platform_driver_register(&fimc_is_driver); - if (!ret) - return ret; - fimc_is_unregister_i2c_driver(); -err_sens: - fimc_is_unregister_sensor_driver(); + if (ret < 0) + fimc_is_unregister_i2c_driver(); + return ret; } static void fimc_is_module_exit(void) { - fimc_is_unregister_sensor_driver(); fimc_is_unregister_i2c_driver(); platform_driver_unregister(&fimc_is_driver); } diff --git a/drivers/media/platform/exynos4-is/fimc-is.h b/drivers/media/platform/exynos4-is/fimc-is.h index 61bb0127e19..01f802f9000 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.h +++ b/drivers/media/platform/exynos4-is/fimc-is.h @@ -39,7 +39,7 @@ #define FIMC_IS_FW_LOAD_TIMEOUT 1000 /* ms */ #define FIMC_IS_POWER_ON_TIMEOUT 1000 /* us */ -#define FIMC_IS_SENSOR_NUM 2 +#define FIMC_IS_SENSORS_NUM 2 /* Memory definitions */ #define FIMC_IS_CPU_MEM_SIZE (0xa00000) @@ -253,7 +253,7 @@ struct fimc_is { struct firmware *f_w; struct fimc_isp isp; - struct fimc_is_sensor *sensor; + struct fimc_is_sensor sensor[FIMC_IS_SENSORS_NUM]; struct fimc_is_setfile setfile; struct vb2_alloc_ctx *alloc_ctx; -- cgit v1.2.3-70-g09d2 From d3f5e0c54f1bfa5f48e92ac45a279fa8cfdc55b7 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 20 Dec 2013 18:53:53 -0300 Subject: [media] exynos4-is: Add clock provider for the SCLK_CAM clock outputs This patch adds clock provider so the the SCLK_CAM0/1 output clocks can be accessed by image sensor devices through the clk API. Signed-off-by: Sylwester Nawrocki Acked-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/exynos4-is/media-dev.c | 118 ++++++++++++++++++++++++++ drivers/media/platform/exynos4-is/media-dev.h | 19 ++++- 2 files changed, 136 insertions(+), 1 deletion(-) diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c index c1bce170df6..f047a9f1043 100644 --- a/drivers/media/platform/exynos4-is/media-dev.c +++ b/drivers/media/platform/exynos4-is/media-dev.c @@ -11,6 +11,8 @@ */ #include +#include +#include #include #include #include @@ -1276,6 +1278,14 @@ int fimc_md_set_camclk(struct v4l2_subdev *sd, bool on) struct fimc_source_info *si = v4l2_get_subdev_hostdata(sd); struct fimc_md *fmd = entity_to_fimc_mdev(&sd->entity); + /* + * If there is a clock provider registered the sensors will + * handle their clock themselves, no need to control it on + * the host interface side. + */ + if (fmd->clk_provider.num_clocks > 0) + return 0; + return __fimc_md_set_camclk(fmd, si, on); } @@ -1437,6 +1447,103 @@ static int fimc_md_get_pinctrl(struct fimc_md *fmd) return 0; } +#ifdef CONFIG_OF +static int cam_clk_prepare(struct clk_hw *hw) +{ + struct cam_clk *camclk = to_cam_clk(hw); + int ret; + + if (camclk->fmd->pmf == NULL) + return -ENODEV; + + ret = pm_runtime_get_sync(camclk->fmd->pmf); + return ret < 0 ? ret : 0; +} + +static void cam_clk_unprepare(struct clk_hw *hw) +{ + struct cam_clk *camclk = to_cam_clk(hw); + + if (camclk->fmd->pmf == NULL) + return; + + pm_runtime_put_sync(camclk->fmd->pmf); +} + +static const struct clk_ops cam_clk_ops = { + .prepare = cam_clk_prepare, + .unprepare = cam_clk_unprepare, +}; + +static void fimc_md_unregister_clk_provider(struct fimc_md *fmd) +{ + struct cam_clk_provider *cp = &fmd->clk_provider; + unsigned int i; + + if (cp->of_node) + of_clk_del_provider(cp->of_node); + + for (i = 0; i < cp->num_clocks; i++) + clk_unregister(cp->clks[i]); +} + +static int fimc_md_register_clk_provider(struct fimc_md *fmd) +{ + struct cam_clk_provider *cp = &fmd->clk_provider; + struct device *dev = &fmd->pdev->dev; + int i, ret; + + for (i = 0; i < FIMC_MAX_CAMCLKS; i++) { + struct cam_clk *camclk = &cp->camclk[i]; + struct clk_init_data init; + const char *p_name; + + ret = of_property_read_string_index(dev->of_node, + "clock-output-names", i, &init.name); + if (ret < 0) + break; + + p_name = __clk_get_name(fmd->camclk[i].clock); + + /* It's safe since clk_register() will duplicate the string. */ + init.parent_names = &p_name; + init.num_parents = 1; + init.ops = &cam_clk_ops; + init.flags = CLK_SET_RATE_PARENT; + camclk->hw.init = &init; + camclk->fmd = fmd; + + cp->clks[i] = clk_register(NULL, &camclk->hw); + if (IS_ERR(cp->clks[i])) { + dev_err(dev, "failed to register clock: %s (%ld)\n", + init.name, PTR_ERR(cp->clks[i])); + ret = PTR_ERR(cp->clks[i]); + goto err; + } + cp->num_clocks++; + } + + if (cp->num_clocks == 0) { + dev_warn(dev, "clk provider not registered\n"); + return 0; + } + + cp->clk_data.clks = cp->clks; + cp->clk_data.clk_num = cp->num_clocks; + cp->of_node = dev->of_node; + ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, + &cp->clk_data); + if (ret == 0) + return 0; +err: + fimc_md_unregister_clk_provider(fmd); + return ret; +} +#else +#define fimc_md_register_clk_provider(fmd) (0) +#define fimc_md_unregister_clk_provider(fmd) (0) +#endif + static int fimc_md_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -1464,16 +1571,24 @@ static int fimc_md_probe(struct platform_device *pdev) fmd->use_isp = fimc_md_is_isp_available(dev->of_node); + ret = fimc_md_register_clk_provider(fmd); + if (ret < 0) { + v4l2_err(v4l2_dev, "clock provider registration failed\n"); + return ret; + } + ret = v4l2_device_register(dev, &fmd->v4l2_dev); if (ret < 0) { v4l2_err(v4l2_dev, "Failed to register v4l2_device: %d\n", ret); return ret; } + ret = media_device_register(&fmd->media_dev); if (ret < 0) { v4l2_err(v4l2_dev, "Failed to register media device: %d\n", ret); goto err_md; } + ret = fimc_md_get_clocks(fmd); if (ret) goto err_clk; @@ -1507,6 +1622,7 @@ static int fimc_md_probe(struct platform_device *pdev) ret = fimc_md_create_links(fmd); if (ret) goto err_unlock; + ret = v4l2_device_register_subdev_nodes(&fmd->v4l2_dev); if (ret) goto err_unlock; @@ -1527,6 +1643,7 @@ err_clk: media_device_unregister(&fmd->media_dev); err_md: v4l2_device_unregister(&fmd->v4l2_dev); + fimc_md_unregister_clk_provider(fmd); return ret; } @@ -1537,6 +1654,7 @@ static int fimc_md_remove(struct platform_device *pdev) if (!fmd) return 0; + fimc_md_unregister_clk_provider(fmd); v4l2_device_unregister(&fmd->v4l2_dev); device_remove_file(&pdev->dev, &dev_attr_subdev_conf_mode); fimc_md_unregister_entities(fmd); diff --git a/drivers/media/platform/exynos4-is/media-dev.h b/drivers/media/platform/exynos4-is/media-dev.h index 62599fd7756..a88cee59fd2 100644 --- a/drivers/media/platform/exynos4-is/media-dev.h +++ b/drivers/media/platform/exynos4-is/media-dev.h @@ -10,6 +10,7 @@ #define FIMC_MDEVICE_H_ #include +#include #include #include #include @@ -89,6 +90,12 @@ struct fimc_sensor_info { struct fimc_dev *host; }; +struct cam_clk { + struct clk_hw hw; + struct fimc_md *fmd; +}; +#define to_cam_clk(_hw) container_of(_hw, struct cam_clk, hw) + /** * struct fimc_md - fimc media device information * @csis: MIPI CSIS subdevs data @@ -105,6 +112,7 @@ struct fimc_sensor_info { * @pinctrl: camera port pinctrl handle * @state_default: pinctrl default state handle * @state_idle: pinctrl idle state handle + * @cam_clk_provider: CAMCLK clock provider structure * @user_subdev_api: true if subdevs are not configured by the host driver * @slock: spinlock protecting @sensor array */ @@ -122,13 +130,22 @@ struct fimc_md { struct media_device media_dev; struct v4l2_device v4l2_dev; struct platform_device *pdev; + struct fimc_pinctrl { struct pinctrl *pinctrl; struct pinctrl_state *state_default; struct pinctrl_state *state_idle; } pinctl; - bool user_subdev_api; + struct cam_clk_provider { + struct clk *clks[FIMC_MAX_CAMCLKS]; + struct clk_onecell_data clk_data; + struct device_node *of_node; + struct cam_clk camclk[FIMC_MAX_CAMCLKS]; + int num_clocks; + } clk_provider; + + bool user_subdev_api; spinlock_t slock; struct list_head pipelines; }; -- cgit v1.2.3-70-g09d2 From fa91f1056f17c87bc0fa601f80d1b1a4487fd701 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Mon, 24 Feb 2014 11:44:50 -0300 Subject: [media] exynos4-is: Add support for asynchronous subdevices registration Add support for registering external sensor subdevs using v4l2-async API. The async API is used only for sensor subdevs and only for booting from DT. Signed-off-by: Sylwester Nawrocki Acked-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/exynos4-is/media-dev.c | 238 +++++++++++++++----------- drivers/media/platform/exynos4-is/media-dev.h | 13 +- 2 files changed, 147 insertions(+), 104 deletions(-) diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c index f047a9f1043..c670d67001f 100644 --- a/drivers/media/platform/exynos4-is/media-dev.c +++ b/drivers/media/platform/exynos4-is/media-dev.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -220,6 +221,7 @@ static int __fimc_pipeline_open(struct exynos_media_pipeline *ep, if (ret < 0) return ret; } + ret = fimc_md_set_camclk(sd, true); if (ret < 0) goto err_wbclk; @@ -380,77 +382,18 @@ static void fimc_md_unregister_sensor(struct v4l2_subdev *sd) struct i2c_client *client = v4l2_get_subdevdata(sd); struct i2c_adapter *adapter; - if (!client) + if (!client || client->dev.of_node) return; v4l2_device_unregister_subdev(sd); - if (!client->dev.of_node) { - adapter = client->adapter; - i2c_unregister_device(client); - if (adapter) - i2c_put_adapter(adapter); - } + adapter = client->adapter; + i2c_unregister_device(client); + if (adapter) + i2c_put_adapter(adapter); } #ifdef CONFIG_OF -/* Register I2C client subdev associated with @node. */ -static int fimc_md_of_add_sensor(struct fimc_md *fmd, - struct device_node *node, int index) -{ - struct fimc_sensor_info *si; - struct i2c_client *client; - struct v4l2_subdev *sd; - int ret; - - if (WARN_ON(index >= ARRAY_SIZE(fmd->sensor))) - return -EINVAL; - si = &fmd->sensor[index]; - - client = of_find_i2c_device_by_node(node); - if (!client) - return -EPROBE_DEFER; - - device_lock(&client->dev); - - if (!client->dev.driver || - !try_module_get(client->dev.driver->owner)) { - ret = -EPROBE_DEFER; - v4l2_info(&fmd->v4l2_dev, "No driver found for %s\n", - node->full_name); - goto dev_put; - } - - /* Enable sensor's master clock */ - ret = __fimc_md_set_camclk(fmd, &si->pdata, true); - if (ret < 0) - goto mod_put; - sd = i2c_get_clientdata(client); - - ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); - __fimc_md_set_camclk(fmd, &si->pdata, false); - if (ret < 0) - goto mod_put; - - v4l2_set_subdev_hostdata(sd, &si->pdata); - if (si->pdata.fimc_bus_type == FIMC_BUS_TYPE_ISP_WRITEBACK) - sd->grp_id = GRP_ID_FIMC_IS_SENSOR; - else - sd->grp_id = GRP_ID_SENSOR; - - si->subdev = sd; - v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice: %s (%d)\n", - sd->name, fmd->num_sensors); - fmd->num_sensors++; - -mod_put: - module_put(client->dev.driver->owner); -dev_put: - device_unlock(&client->dev); - put_device(&client->dev); - return ret; -} - /* Parse port node and register as a sub-device any sensor specified there. */ static int fimc_md_parse_port_node(struct fimc_md *fmd, struct device_node *port, @@ -459,7 +402,6 @@ static int fimc_md_parse_port_node(struct fimc_md *fmd, struct device_node *rem, *ep, *np; struct fimc_source_info *pd; struct v4l2_of_endpoint endpoint; - int ret; u32 val; pd = &fmd->sensor[index].pdata; @@ -487,6 +429,8 @@ static int fimc_md_parse_port_node(struct fimc_md *fmd, if (!of_property_read_u32(rem, "clock-frequency", &val)) pd->clk_frequency = val; + else + pd->clk_frequency = DEFAULT_SENSOR_CLK_FREQ; if (pd->clk_frequency == 0) { v4l2_err(&fmd->v4l2_dev, "Wrong clock frequency at node %s\n", @@ -526,10 +470,17 @@ static int fimc_md_parse_port_node(struct fimc_md *fmd, else pd->fimc_bus_type = pd->sensor_bus_type; - ret = fimc_md_of_add_sensor(fmd, rem, index); - of_node_put(rem); + if (WARN_ON(index >= ARRAY_SIZE(fmd->sensor))) + return -EINVAL; - return ret; + fmd->sensor[index].asd.match_type = V4L2_ASYNC_MATCH_OF; + fmd->sensor[index].asd.match.of.node = rem; + fmd->async_subdevs[index] = &fmd->sensor[index].asd; + + fmd->num_sensors++; + + of_node_put(rem); + return 0; } /* Register all SoC external sub-devices */ @@ -885,11 +836,13 @@ static void fimc_md_unregister_entities(struct fimc_md *fmd) v4l2_device_unregister_subdev(fmd->csis[i].sd); fmd->csis[i].sd = NULL; } - for (i = 0; i < fmd->num_sensors; i++) { - if (fmd->sensor[i].subdev == NULL) - continue; - fimc_md_unregister_sensor(fmd->sensor[i].subdev); - fmd->sensor[i].subdev = NULL; + if (fmd->pdev->dev.of_node == NULL) { + for (i = 0; i < fmd->num_sensors; i++) { + if (fmd->sensor[i].subdev == NULL) + continue; + fimc_md_unregister_sensor(fmd->sensor[i].subdev); + fmd->sensor[i].subdev = NULL; + } } if (fmd->fimc_is) @@ -1224,6 +1177,14 @@ static int __fimc_md_set_camclk(struct fimc_md *fmd, struct fimc_camclk_info *camclk; int ret = 0; + /* + * When device tree is used the sensor drivers are supposed to + * control the clock themselves. This whole function will be + * removed once S5PV210 platform is converted to the device tree. + */ + if (fmd->pdev->dev.of_node) + return 0; + if (WARN_ON(si->clk_id >= FIMC_MAX_CAMCLKS) || !fmd || !fmd->pmf) return -EINVAL; @@ -1544,6 +1505,56 @@ err: #define fimc_md_unregister_clk_provider(fmd) (0) #endif +static int subdev_notifier_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd) +{ + struct fimc_md *fmd = notifier_to_fimc_md(notifier); + struct fimc_sensor_info *si = NULL; + int i; + + /* Find platform data for this sensor subdev */ + for (i = 0; i < ARRAY_SIZE(fmd->sensor); i++) + if (fmd->sensor[i].asd.match.of.node == subdev->dev->of_node) + si = &fmd->sensor[i]; + + if (si == NULL) + return -EINVAL; + + v4l2_set_subdev_hostdata(subdev, &si->pdata); + + if (si->pdata.fimc_bus_type == FIMC_BUS_TYPE_ISP_WRITEBACK) + subdev->grp_id = GRP_ID_FIMC_IS_SENSOR; + else + subdev->grp_id = GRP_ID_SENSOR; + + si->subdev = subdev; + + v4l2_info(&fmd->v4l2_dev, "Registered sensor subdevice: %s (%d)\n", + subdev->name, fmd->num_sensors); + + fmd->num_sensors++; + + return 0; +} + +static int subdev_notifier_complete(struct v4l2_async_notifier *notifier) +{ + struct fimc_md *fmd = notifier_to_fimc_md(notifier); + int ret; + + mutex_lock(&fmd->media_dev.graph_mutex); + + ret = fimc_md_create_links(fmd); + if (ret < 0) + goto unlock; + + ret = v4l2_device_register_subdev_nodes(&fmd->v4l2_dev); +unlock: + mutex_unlock(&fmd->media_dev.graph_mutex); + return ret; +} + static int fimc_md_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -1571,12 +1582,6 @@ static int fimc_md_probe(struct platform_device *pdev) fmd->use_isp = fimc_md_is_isp_available(dev->of_node); - ret = fimc_md_register_clk_provider(fmd); - if (ret < 0) { - v4l2_err(v4l2_dev, "clock provider registration failed\n"); - return ret; - } - ret = v4l2_device_register(dev, &fmd->v4l2_dev); if (ret < 0) { v4l2_err(v4l2_dev, "Failed to register v4l2_device: %d\n", ret); @@ -1586,64 +1591,88 @@ static int fimc_md_probe(struct platform_device *pdev) ret = media_device_register(&fmd->media_dev); if (ret < 0) { v4l2_err(v4l2_dev, "Failed to register media device: %d\n", ret); - goto err_md; + goto err_v4l2_dev; } ret = fimc_md_get_clocks(fmd); if (ret) - goto err_clk; + goto err_md; fmd->user_subdev_api = (dev->of_node != NULL); - /* Protect the media graph while we're registering entities */ - mutex_lock(&fmd->media_dev.graph_mutex); - ret = fimc_md_get_pinctrl(fmd); if (ret < 0) { if (ret != EPROBE_DEFER) dev_err(dev, "Failed to get pinctrl: %d\n", ret); - goto err_unlock; + goto err_clk; } + platform_set_drvdata(pdev, fmd); + + /* Protect the media graph while we're registering entities */ + mutex_lock(&fmd->media_dev.graph_mutex); + if (dev->of_node) ret = fimc_md_register_of_platform_entities(fmd, dev->of_node); else ret = bus_for_each_dev(&platform_bus_type, NULL, fmd, fimc_md_pdev_match); - if (ret) - goto err_unlock; + if (ret) { + mutex_unlock(&fmd->media_dev.graph_mutex); + goto err_clk; + } if (dev->platform_data || dev->of_node) { ret = fimc_md_register_sensor_entities(fmd); - if (ret) - goto err_unlock; + if (ret) { + mutex_unlock(&fmd->media_dev.graph_mutex); + goto err_m_ent; + } } - ret = fimc_md_create_links(fmd); - if (ret) - goto err_unlock; - - ret = v4l2_device_register_subdev_nodes(&fmd->v4l2_dev); - if (ret) - goto err_unlock; + mutex_unlock(&fmd->media_dev.graph_mutex); ret = device_create_file(&pdev->dev, &dev_attr_subdev_conf_mode); if (ret) - goto err_unlock; + goto err_m_ent; + /* + * FIMC platform devices need to be registered before the sclk_cam + * clocks provider, as one of these devices needs to be activated + * to enable the clock. + */ + ret = fimc_md_register_clk_provider(fmd); + if (ret < 0) { + v4l2_err(v4l2_dev, "clock provider registration failed\n"); + goto err_attr; + } + + if (fmd->num_sensors > 0) { + fmd->subdev_notifier.subdevs = fmd->async_subdevs; + fmd->subdev_notifier.num_subdevs = fmd->num_sensors; + fmd->subdev_notifier.bound = subdev_notifier_bound; + fmd->subdev_notifier.complete = subdev_notifier_complete; + fmd->num_sensors = 0; + + ret = v4l2_async_notifier_register(&fmd->v4l2_dev, + &fmd->subdev_notifier); + if (ret) + goto err_clk_p; + } - platform_set_drvdata(pdev, fmd); - mutex_unlock(&fmd->media_dev.graph_mutex); return 0; -err_unlock: - mutex_unlock(&fmd->media_dev.graph_mutex); +err_clk_p: + fimc_md_unregister_clk_provider(fmd); +err_attr: + device_remove_file(&pdev->dev, &dev_attr_subdev_conf_mode); err_clk: fimc_md_put_clocks(fmd); +err_m_ent: fimc_md_unregister_entities(fmd); - media_device_unregister(&fmd->media_dev); err_md: + media_device_unregister(&fmd->media_dev); +err_v4l2_dev: v4l2_device_unregister(&fmd->v4l2_dev); - fimc_md_unregister_clk_provider(fmd); return ret; } @@ -1655,12 +1684,15 @@ static int fimc_md_remove(struct platform_device *pdev) return 0; fimc_md_unregister_clk_provider(fmd); + v4l2_async_notifier_unregister(&fmd->subdev_notifier); + v4l2_device_unregister(&fmd->v4l2_dev); device_remove_file(&pdev->dev, &dev_attr_subdev_conf_mode); fimc_md_unregister_entities(fmd); fimc_md_pipelines_free(fmd); media_device_unregister(&fmd->media_dev); fimc_md_put_clocks(fmd); + return 0; } diff --git a/drivers/media/platform/exynos4-is/media-dev.h b/drivers/media/platform/exynos4-is/media-dev.h index a88cee59fd2..ee1e2519f72 100644 --- a/drivers/media/platform/exynos4-is/media-dev.h +++ b/drivers/media/platform/exynos4-is/media-dev.h @@ -32,8 +32,9 @@ #define PINCTRL_STATE_IDLE "idle" -#define FIMC_MAX_SENSORS 8 +#define FIMC_MAX_SENSORS 4 #define FIMC_MAX_CAMCLKS 2 +#define DEFAULT_SENSOR_CLK_FREQ 24000000U /* LCD/ISP Writeback clocks (PIXELASYNCMx) */ enum { @@ -79,6 +80,7 @@ struct fimc_camclk_info { /** * struct fimc_sensor_info - image data source subdev information * @pdata: sensor's atrributes passed as media device's platform data + * @asd: asynchronous subdev registration data structure * @subdev: image sensor v4l2 subdev * @host: fimc device the sensor is currently linked to * @@ -86,6 +88,7 @@ struct fimc_camclk_info { */ struct fimc_sensor_info { struct fimc_source_info pdata; + struct v4l2_async_subdev asd; struct v4l2_subdev *subdev; struct fimc_dev *host; }; @@ -145,6 +148,9 @@ struct fimc_md { int num_clocks; } clk_provider; + struct v4l2_async_notifier subdev_notifier; + struct v4l2_async_subdev *async_subdevs[FIMC_MAX_SENSORS]; + bool user_subdev_api; spinlock_t slock; struct list_head pipelines; @@ -162,6 +168,11 @@ static inline struct fimc_md *entity_to_fimc_mdev(struct media_entity *me) container_of(me->parent, struct fimc_md, media_dev); } +static inline struct fimc_md *notifier_to_fimc_md(struct v4l2_async_notifier *n) +{ + return container_of(n, struct fimc_md, subdev_notifier); +} + static inline void fimc_md_graph_lock(struct exynos_video_entity *ve) { mutex_lock(&ve->vdev.entity.parent->graph_mutex); -- cgit v1.2.3-70-g09d2 From 34947b8aebe3f2d4eceb65fceafa92bf8dc97d96 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 20 Dec 2013 19:35:06 -0300 Subject: [media] exynos4-is: Add the FIMC-IS ISP capture DMA driver Add a video capture node for the FIMC-IS ISP IP block. The Exynos4x12 FIMC-IS ISP IP block has 2 DMA interfaces that allow to capture raw Bayer and YUV data to memory. Currently only the DMA2 output is and raw Bayer data capture is supported. Signed-off-by: Sylwester Nawrocki Acked-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/exynos4-is/Kconfig | 9 + drivers/media/platform/exynos4-is/Makefile | 4 + drivers/media/platform/exynos4-is/fimc-is-param.c | 2 +- drivers/media/platform/exynos4-is/fimc-is-param.h | 5 + drivers/media/platform/exynos4-is/fimc-is-regs.c | 14 + drivers/media/platform/exynos4-is/fimc-is-regs.h | 1 + drivers/media/platform/exynos4-is/fimc-is.c | 3 + drivers/media/platform/exynos4-is/fimc-is.h | 5 + drivers/media/platform/exynos4-is/fimc-isp-video.c | 660 +++++++++++++++++++++ drivers/media/platform/exynos4-is/fimc-isp-video.h | 44 ++ drivers/media/platform/exynos4-is/fimc-isp.c | 29 +- drivers/media/platform/exynos4-is/fimc-isp.h | 27 +- drivers/media/platform/exynos4-is/media-dev.c | 23 +- 13 files changed, 817 insertions(+), 9 deletions(-) create mode 100644 drivers/media/platform/exynos4-is/fimc-isp-video.c create mode 100644 drivers/media/platform/exynos4-is/fimc-isp-video.h diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig index 01ed1ecdff7..e1b2ceba00c 100644 --- a/drivers/media/platform/exynos4-is/Kconfig +++ b/drivers/media/platform/exynos4-is/Kconfig @@ -64,4 +64,13 @@ config VIDEO_EXYNOS4_FIMC_IS To compile this driver as a module, choose M here: the module will be called exynos4-fimc-is. +config VIDEO_EXYNOS4_ISP_DMA_CAPTURE + bool "EXYNOS4x12 FIMC-IS ISP Direct DMA capture support" + depends on VIDEO_EXYNOS4_FIMC_IS + select VIDEO_EXYNOS4_IS_COMMON + default y + help + This option enables an additional video device node exposing a V4L2 + video capture interface for the FIMC-IS ISP raw (Bayer) capture DMA. + endif # VIDEO_SAMSUNG_EXYNOS4_IS diff --git a/drivers/media/platform/exynos4-is/Makefile b/drivers/media/platform/exynos4-is/Makefile index c2ff29ba685..eed1b185d81 100644 --- a/drivers/media/platform/exynos4-is/Makefile +++ b/drivers/media/platform/exynos4-is/Makefile @@ -6,6 +6,10 @@ exynos4-is-common-objs := common.o exynos-fimc-is-objs := fimc-is.o fimc-isp.o fimc-is-sensor.o fimc-is-regs.o exynos-fimc-is-objs += fimc-is-param.o fimc-is-errno.o fimc-is-i2c.o +ifeq ($(CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE),y) +exynos-fimc-is-objs += fimc-isp-video.o +endif + obj-$(CONFIG_VIDEO_S5P_MIPI_CSIS) += s5p-csis.o obj-$(CONFIG_VIDEO_EXYNOS_FIMC_LITE) += exynos-fimc-lite.o obj-$(CONFIG_VIDEO_EXYNOS4_FIMC_IS) += exynos-fimc-is.o diff --git a/drivers/media/platform/exynos4-is/fimc-is-param.c b/drivers/media/platform/exynos4-is/fimc-is-param.c index 9bf3ddd9e02..bf1465d1bf6 100644 --- a/drivers/media/platform/exynos4-is/fimc-is-param.c +++ b/drivers/media/platform/exynos4-is/fimc-is-param.c @@ -56,7 +56,7 @@ static void __fimc_is_hw_update_param_sensor_framerate(struct fimc_is *is) __hw_param_copy(dst, src); } -static int __fimc_is_hw_update_param(struct fimc_is *is, u32 offset) +int __fimc_is_hw_update_param(struct fimc_is *is, u32 offset) { struct is_param_region *par = &is->is_p_region->parameter; struct chain_config *cfg = &is->config[is->config_index]; diff --git a/drivers/media/platform/exynos4-is/fimc-is-param.h b/drivers/media/platform/exynos4-is/fimc-is-param.h index f9358c27ae2..8e31f764277 100644 --- a/drivers/media/platform/exynos4-is/fimc-is-param.h +++ b/drivers/media/platform/exynos4-is/fimc-is-param.h @@ -911,6 +911,10 @@ struct is_region { u32 shared[MAX_SHARED_COUNT]; } __packed; +/* Offset to the ISP DMA2 output buffer address array. */ +#define DMA2_OUTPUT_ADDR_ARRAY_OFFS \ + (offsetof(struct is_region, shared) + 32 * sizeof(u32)) + struct is_debug_frame_descriptor { u32 sensor_frame_time; u32 sensor_exposure_time; @@ -988,6 +992,7 @@ struct sensor_open_extended { struct fimc_is; int fimc_is_hw_get_sensor_max_framerate(struct fimc_is *is); +int __fimc_is_hw_update_param(struct fimc_is *is, u32 offset); void fimc_is_set_initial_params(struct fimc_is *is); unsigned int __get_pending_param_count(struct fimc_is *is); diff --git a/drivers/media/platform/exynos4-is/fimc-is-regs.c b/drivers/media/platform/exynos4-is/fimc-is-regs.c index 5c7bd2ac40d..cfe4406a83f 100644 --- a/drivers/media/platform/exynos4-is/fimc-is-regs.c +++ b/drivers/media/platform/exynos4-is/fimc-is-regs.c @@ -105,6 +105,20 @@ int fimc_is_hw_get_params(struct fimc_is *is, unsigned int num_args) return 0; } +void fimc_is_hw_set_isp_buf_mask(struct fimc_is *is, unsigned int mask) +{ + if (hweight32(mask) == 1) { + dev_err(&is->pdev->dev, "%s(): not enough buffers (mask %#x)\n", + __func__, mask); + return; + } + + if (mcuctl_read(is, MCUCTL_REG_ISSR(23)) != 0) + dev_dbg(&is->pdev->dev, "non-zero DMA buffer mask\n"); + + mcuctl_write(mask, is, MCUCTL_REG_ISSR(23)); +} + void fimc_is_hw_set_sensor_num(struct fimc_is *is) { pr_debug("setting sensor index to: %d\n", is->sensor_index); diff --git a/drivers/media/platform/exynos4-is/fimc-is-regs.h b/drivers/media/platform/exynos4-is/fimc-is-regs.h index 1d9d4ffc6ad..141e5ddadbe 100644 --- a/drivers/media/platform/exynos4-is/fimc-is-regs.h +++ b/drivers/media/platform/exynos4-is/fimc-is-regs.h @@ -147,6 +147,7 @@ int fimc_is_hw_get_params(struct fimc_is *is, unsigned int num); void fimc_is_hw_set_intgr0_gd0(struct fimc_is *is); int fimc_is_hw_wait_intmsr0_intmsd0(struct fimc_is *is); void fimc_is_hw_set_sensor_num(struct fimc_is *is); +void fimc_is_hw_set_isp_buf_mask(struct fimc_is *is, unsigned int mask); void fimc_is_hw_stream_on(struct fimc_is *is); void fimc_is_hw_stream_off(struct fimc_is *is); int fimc_is_hw_set_param(struct fimc_is *is); diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c index a8f58451e26..c289d5a69d0 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.c +++ b/drivers/media/platform/exynos4-is/fimc-is.c @@ -204,6 +204,9 @@ static int fimc_is_register_subdevs(struct fimc_is *is) if (ret < 0) return ret; + /* Initialize memory allocator context for the ISP DMA. */ + is->isp.alloc_ctx = is->alloc_ctx; + for_each_compatible_node(i2c_bus, NULL, FIMC_IS_I2C_COMPATIBLE) { for_each_available_child_of_node(i2c_bus, child) { ret = fimc_is_parse_sensor_config(is, index, child); diff --git a/drivers/media/platform/exynos4-is/fimc-is.h b/drivers/media/platform/exynos4-is/fimc-is.h index 01f802f9000..e0be691af2d 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.h +++ b/drivers/media/platform/exynos4-is/fimc-is.h @@ -292,6 +292,11 @@ static inline struct fimc_is *fimc_isp_to_is(struct fimc_isp *isp) return container_of(isp, struct fimc_is, isp); } +static inline struct chain_config *__get_curr_is_config(struct fimc_is *is) +{ + return &is->config[is->config_index]; +} + static inline void fimc_is_mem_barrier(void) { mb(); diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.c b/drivers/media/platform/exynos4-is/fimc-isp-video.c new file mode 100644 index 00000000000..e92b4e115ad --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-isp-video.c @@ -0,0 +1,660 @@ +/* + * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver + * + * FIMC-IS ISP video input and video output DMA interface driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki + * + * The hardware handling code derived from a driver written by + * Younghwan Joo . + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "common.h" +#include "media-dev.h" +#include "fimc-is.h" +#include "fimc-isp-video.h" +#include "fimc-is-param.h" + +static int isp_video_capture_queue_setup(struct vb2_queue *vq, + const struct v4l2_format *pfmt, + unsigned int *num_buffers, unsigned int *num_planes, + unsigned int sizes[], void *allocators[]) +{ + struct fimc_isp *isp = vb2_get_drv_priv(vq); + struct v4l2_pix_format_mplane *vid_fmt = &isp->video_capture.pixfmt; + const struct v4l2_pix_format_mplane *pixm = NULL; + const struct fimc_fmt *fmt; + unsigned int wh, i; + + if (pfmt) { + pixm = &pfmt->fmt.pix_mp; + fmt = fimc_isp_find_format(&pixm->pixelformat, NULL, -1); + wh = pixm->width * pixm->height; + } else { + fmt = isp->video_capture.format; + wh = vid_fmt->width * vid_fmt->height; + } + + if (fmt == NULL) + return -EINVAL; + + *num_buffers = clamp_t(u32, *num_buffers, FIMC_ISP_REQ_BUFS_MIN, + FIMC_ISP_REQ_BUFS_MAX); + *num_planes = fmt->memplanes; + + for (i = 0; i < fmt->memplanes; i++) { + unsigned int size = (wh * fmt->depth[i]) / 8; + if (pixm) + sizes[i] = max(size, pixm->plane_fmt[i].sizeimage); + else + sizes[i] = size; + allocators[i] = isp->alloc_ctx; + } + + return 0; +} + +static inline struct param_dma_output *__get_isp_dma2(struct fimc_is *is) +{ + return &__get_curr_is_config(is)->isp.dma2_output; +} + +static int isp_video_capture_start_streaming(struct vb2_queue *q, + unsigned int count) +{ + struct fimc_isp *isp = vb2_get_drv_priv(q); + struct fimc_is *is = fimc_isp_to_is(isp); + struct param_dma_output *dma = __get_isp_dma2(is); + struct fimc_is_video *video = &isp->video_capture; + int ret; + + if (!test_bit(ST_ISP_VID_CAP_BUF_PREP, &isp->state) || + test_bit(ST_ISP_VID_CAP_STREAMING, &isp->state)) + return 0; + + + dma->cmd = DMA_OUTPUT_COMMAND_ENABLE; + dma->notify_dma_done = DMA_OUTPUT_NOTIFY_DMA_DONE_ENABLE; + dma->buffer_address = is->is_dma_p_region + + DMA2_OUTPUT_ADDR_ARRAY_OFFS; + dma->buffer_number = video->reqbufs_count; + dma->dma_out_mask = video->buf_mask; + + isp_dbg(2, &video->ve.vdev, + "buf_count: %d, planes: %d, dma addr table: %#x\n", + video->buf_count, video->format->memplanes, + dma->buffer_address); + + fimc_is_mem_barrier(); + + fimc_is_set_param_bit(is, PARAM_ISP_DMA2_OUTPUT); + __fimc_is_hw_update_param(is, PARAM_ISP_DMA2_OUTPUT); + + ret = fimc_is_itf_s_param(is, false); + if (ret < 0) + return ret; + + ret = fimc_pipeline_call(&video->ve, set_stream, 1); + if (ret < 0) + return ret; + + set_bit(ST_ISP_VID_CAP_STREAMING, &isp->state); + return ret; +} + +static int isp_video_capture_stop_streaming(struct vb2_queue *q) +{ + struct fimc_isp *isp = vb2_get_drv_priv(q); + struct fimc_is *is = fimc_isp_to_is(isp); + struct param_dma_output *dma = __get_isp_dma2(is); + int ret; + + ret = fimc_pipeline_call(&isp->video_capture.ve, set_stream, 0); + if (ret < 0) + return ret; + + dma->cmd = DMA_OUTPUT_COMMAND_DISABLE; + dma->notify_dma_done = DMA_OUTPUT_NOTIFY_DMA_DONE_DISABLE; + dma->buffer_number = 0; + dma->buffer_address = 0; + dma->dma_out_mask = 0; + + fimc_is_set_param_bit(is, PARAM_ISP_DMA2_OUTPUT); + __fimc_is_hw_update_param(is, PARAM_ISP_DMA2_OUTPUT); + + ret = fimc_is_itf_s_param(is, false); + if (ret < 0) + dev_warn(&is->pdev->dev, "%s: DMA stop failed\n", __func__); + + fimc_is_hw_set_isp_buf_mask(is, 0); + + clear_bit(ST_ISP_VID_CAP_BUF_PREP, &isp->state); + clear_bit(ST_ISP_VID_CAP_STREAMING, &isp->state); + + isp->video_capture.buf_count = 0; + return 0; +} + +static int isp_video_capture_buffer_prepare(struct vb2_buffer *vb) +{ + struct fimc_isp *isp = vb2_get_drv_priv(vb->vb2_queue); + struct fimc_is_video *video = &isp->video_capture; + int i; + + if (video->format == NULL) + return -EINVAL; + + for (i = 0; i < video->format->memplanes; i++) { + unsigned long size = video->pixfmt.plane_fmt[i].sizeimage; + + if (vb2_plane_size(vb, i) < size) { + v4l2_err(&video->ve.vdev, + "User buffer too small (%ld < %ld)\n", + vb2_plane_size(vb, i), size); + return -EINVAL; + } + vb2_set_plane_payload(vb, i, size); + } + + /* Check if we get one of the already known buffers. */ + if (test_bit(ST_ISP_VID_CAP_BUF_PREP, &isp->state)) { + dma_addr_t dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0); + int i; + + for (i = 0; i < video->buf_count; i++) + if (video->buffers[i]->dma_addr[0] == dma_addr) + return 0; + return -ENXIO; + } + + return 0; +} + +static void isp_video_capture_buffer_queue(struct vb2_buffer *vb) +{ + struct fimc_isp *isp = vb2_get_drv_priv(vb->vb2_queue); + struct fimc_is_video *video = &isp->video_capture; + struct fimc_is *is = fimc_isp_to_is(isp); + struct isp_video_buf *ivb = to_isp_video_buf(vb); + unsigned long flags; + unsigned int i; + + if (test_bit(ST_ISP_VID_CAP_BUF_PREP, &isp->state)) { + spin_lock_irqsave(&is->slock, flags); + video->buf_mask |= BIT(ivb->index); + spin_unlock_irqrestore(&is->slock, flags); + } else { + unsigned int num_planes = video->format->memplanes; + + ivb->index = video->buf_count; + video->buffers[ivb->index] = ivb; + + for (i = 0; i < num_planes; i++) { + int buf_index = ivb->index * num_planes + i; + + ivb->dma_addr[i] = vb2_dma_contig_plane_dma_addr(vb, i); + is->is_p_region->shared[32 + buf_index] = + ivb->dma_addr[i]; + + isp_dbg(2, &video->ve.vdev, + "dma_buf %d (%d/%d/%d) addr: %#x\n", + buf_index, ivb->index, i, vb->v4l2_buf.index, + ivb->dma_addr[i]); + } + + if (++video->buf_count < video->reqbufs_count) + return; + + video->buf_mask = (1UL << video->buf_count) - 1; + set_bit(ST_ISP_VID_CAP_BUF_PREP, &isp->state); + } + + if (!test_bit(ST_ISP_VID_CAP_STREAMING, &isp->state)) + isp_video_capture_start_streaming(vb->vb2_queue, 0); +} + +/* + * FIMC-IS ISP input and output DMA interface interrupt handler. + * Locking: called with is->slock spinlock held. + */ +void fimc_isp_video_irq_handler(struct fimc_is *is) +{ + struct fimc_is_video *video = &is->isp.video_capture; + struct vb2_buffer *vb; + int buf_index; + + /* TODO: Ensure the DMA is really stopped in stop_streaming callback */ + if (!test_bit(ST_ISP_VID_CAP_STREAMING, &is->isp.state)) + return; + + buf_index = (is->i2h_cmd.args[1] - 1) % video->buf_count; + vb = &video->buffers[buf_index]->vb; + + v4l2_get_timestamp(&vb->v4l2_buf.timestamp); + vb2_buffer_done(vb, VB2_BUF_STATE_DONE); + + video->buf_mask &= ~BIT(buf_index); + fimc_is_hw_set_isp_buf_mask(is, video->buf_mask); +} + +static const struct vb2_ops isp_video_capture_qops = { + .queue_setup = isp_video_capture_queue_setup, + .buf_prepare = isp_video_capture_buffer_prepare, + .buf_queue = isp_video_capture_buffer_queue, + .wait_prepare = vb2_ops_wait_prepare, + .wait_finish = vb2_ops_wait_finish, + .start_streaming = isp_video_capture_start_streaming, + .stop_streaming = isp_video_capture_stop_streaming, +}; + +static int isp_video_open(struct file *file) +{ + struct fimc_isp *isp = video_drvdata(file); + struct exynos_video_entity *ve = &isp->video_capture.ve; + struct media_entity *me = &ve->vdev.entity; + int ret; + + if (mutex_lock_interruptible(&isp->video_lock)) + return -ERESTARTSYS; + + ret = v4l2_fh_open(file); + if (ret < 0) + goto unlock; + + ret = pm_runtime_get_sync(&isp->pdev->dev); + if (ret < 0) + goto rel_fh; + + if (v4l2_fh_is_singular_file(file)) { + mutex_lock(&me->parent->graph_mutex); + + ret = fimc_pipeline_call(ve, open, me, true); + + /* Mark the video pipeline as in use. */ + if (ret == 0) + me->use_count++; + + mutex_unlock(&me->parent->graph_mutex); + } + if (!ret) + goto unlock; +rel_fh: + v4l2_fh_release(file); +unlock: + mutex_unlock(&isp->video_lock); + return ret; +} + +static int isp_video_release(struct file *file) +{ + struct fimc_isp *isp = video_drvdata(file); + struct fimc_is_video *ivc = &isp->video_capture; + struct media_entity *entity = &ivc->ve.vdev.entity; + struct media_device *mdev = entity->parent; + int ret = 0; + + mutex_lock(&isp->video_lock); + + if (v4l2_fh_is_singular_file(file) && ivc->streaming) { + media_entity_pipeline_stop(entity); + ivc->streaming = 0; + } + + vb2_fop_release(file); + + if (v4l2_fh_is_singular_file(file)) { + fimc_pipeline_call(&ivc->ve, close); + + mutex_lock(&mdev->graph_mutex); + entity->use_count--; + mutex_unlock(&mdev->graph_mutex); + } + + pm_runtime_put(&isp->pdev->dev); + mutex_unlock(&isp->video_lock); + + return ret; +} + +static const struct v4l2_file_operations isp_video_fops = { + .owner = THIS_MODULE, + .open = isp_video_open, + .release = isp_video_release, + .poll = vb2_fop_poll, + .unlocked_ioctl = video_ioctl2, + .mmap = vb2_fop_mmap, +}; + +/* + * Video node ioctl operations + */ +static int isp_video_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct fimc_isp *isp = video_drvdata(file); + + __fimc_vidioc_querycap(&isp->pdev->dev, cap, V4L2_CAP_STREAMING); + return 0; +} + +static int isp_video_enum_fmt_mplane(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + const struct fimc_fmt *fmt; + + if (f->index >= FIMC_ISP_NUM_FORMATS) + return -EINVAL; + + fmt = fimc_isp_find_format(NULL, NULL, f->index); + if (WARN_ON(fmt == NULL)) + return -EINVAL; + + strlcpy(f->description, fmt->name, sizeof(f->description)); + f->pixelformat = fmt->fourcc; + + return 0; +} + +static int isp_video_g_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct fimc_isp *isp = video_drvdata(file); + + f->fmt.pix_mp = isp->video_capture.pixfmt; + return 0; +} + +static void __isp_video_try_fmt(struct fimc_isp *isp, + struct v4l2_pix_format_mplane *pixm, + const struct fimc_fmt **fmt) +{ + *fmt = fimc_isp_find_format(&pixm->pixelformat, NULL, 2); + + pixm->colorspace = V4L2_COLORSPACE_SRGB; + pixm->field = V4L2_FIELD_NONE; + pixm->num_planes = (*fmt)->memplanes; + pixm->pixelformat = (*fmt)->fourcc; + /* + * TODO: double check with the docmentation these width/height + * constraints are correct. + */ + v4l_bound_align_image(&pixm->width, FIMC_ISP_SOURCE_WIDTH_MIN, + FIMC_ISP_SOURCE_WIDTH_MAX, 3, + &pixm->height, FIMC_ISP_SOURCE_HEIGHT_MIN, + FIMC_ISP_SOURCE_HEIGHT_MAX, 0, 0); +} + +static int isp_video_try_fmt_mplane(struct file *file, void *fh, + struct v4l2_format *f) +{ + struct fimc_isp *isp = video_drvdata(file); + + __isp_video_try_fmt(isp, &f->fmt.pix_mp, NULL); + return 0; +} + +static int isp_video_s_fmt_mplane(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct fimc_isp *isp = video_drvdata(file); + struct fimc_is *is = fimc_isp_to_is(isp); + struct v4l2_pix_format_mplane *pixm = &f->fmt.pix_mp; + const struct fimc_fmt *ifmt = NULL; + struct param_dma_output *dma = __get_isp_dma2(is); + + __isp_video_try_fmt(isp, pixm, &ifmt); + + if (WARN_ON(ifmt == NULL)) + return -EINVAL; + + dma->format = DMA_OUTPUT_FORMAT_BAYER; + dma->order = DMA_OUTPUT_ORDER_GB_BG; + dma->plane = ifmt->memplanes; + dma->bitwidth = ifmt->depth[0]; + dma->width = pixm->width; + dma->height = pixm->height; + + fimc_is_mem_barrier(); + + isp->video_capture.format = ifmt; + isp->video_capture.pixfmt = *pixm; + + return 0; +} + +/* + * Check for source/sink format differences at each link. + * Return 0 if the formats match or -EPIPE otherwise. + */ +static int isp_video_pipeline_validate(struct fimc_isp *isp) +{ + struct v4l2_subdev *sd = &isp->subdev; + struct v4l2_subdev_format sink_fmt, src_fmt; + struct media_pad *pad; + int ret; + + while (1) { + /* Retrieve format at the sink pad */ + pad = &sd->entity.pads[0]; + if (!(pad->flags & MEDIA_PAD_FL_SINK)) + break; + sink_fmt.pad = pad->index; + sink_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &sink_fmt); + if (ret < 0 && ret != -ENOIOCTLCMD) + return -EPIPE; + + /* Retrieve format at the source pad */ + pad = media_entity_remote_pad(pad); + if (pad == NULL || + media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV) + break; + + sd = media_entity_to_v4l2_subdev(pad->entity); + src_fmt.pad = pad->index; + src_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE; + ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &src_fmt); + if (ret < 0 && ret != -ENOIOCTLCMD) + return -EPIPE; + + if (src_fmt.format.width != sink_fmt.format.width || + src_fmt.format.height != sink_fmt.format.height || + src_fmt.format.code != sink_fmt.format.code) + return -EPIPE; + } + + return 0; +} + +static int isp_video_streamon(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct fimc_isp *isp = video_drvdata(file); + struct exynos_video_entity *ve = &isp->video_capture.ve; + struct media_entity *me = &ve->vdev.entity; + int ret; + + ret = media_entity_pipeline_start(me, &ve->pipe->mp); + if (ret < 0) + return ret; + + ret = isp_video_pipeline_validate(isp); + if (ret < 0) + goto p_stop; + + ret = vb2_ioctl_streamon(file, priv, type); + if (ret < 0) + goto p_stop; + + isp->video_capture.streaming = 1; + return 0; +p_stop: + media_entity_pipeline_stop(me); + return ret; +} + +static int isp_video_streamoff(struct file *file, void *priv, + enum v4l2_buf_type type) +{ + struct fimc_isp *isp = video_drvdata(file); + struct fimc_is_video *video = &isp->video_capture; + int ret; + + ret = vb2_ioctl_streamoff(file, priv, type); + if (ret < 0) + return ret; + + media_entity_pipeline_stop(&video->ve.vdev.entity); + video->streaming = 0; + return 0; +} + +static int isp_video_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *rb) +{ + struct fimc_isp *isp = video_drvdata(file); + int ret; + + ret = vb2_ioctl_reqbufs(file, priv, rb); + if (ret < 0) + return ret; + + if (rb->count && rb->count < FIMC_ISP_REQ_BUFS_MIN) { + rb->count = 0; + vb2_ioctl_reqbufs(file, priv, rb); + ret = -ENOMEM; + } + + isp->video_capture.reqbufs_count = rb->count; + return ret; +} + +static const struct v4l2_ioctl_ops isp_video_ioctl_ops = { + .vidioc_querycap = isp_video_querycap, + .vidioc_enum_fmt_vid_cap_mplane = isp_video_enum_fmt_mplane, + .vidioc_try_fmt_vid_cap_mplane = isp_video_try_fmt_mplane, + .vidioc_s_fmt_vid_cap_mplane = isp_video_s_fmt_mplane, + .vidioc_g_fmt_vid_cap_mplane = isp_video_g_fmt_mplane, + .vidioc_reqbufs = isp_video_reqbufs, + .vidioc_querybuf = vb2_ioctl_querybuf, + .vidioc_prepare_buf = vb2_ioctl_prepare_buf, + .vidioc_create_bufs = vb2_ioctl_create_bufs, + .vidioc_qbuf = vb2_ioctl_qbuf, + .vidioc_dqbuf = vb2_ioctl_dqbuf, + .vidioc_streamon = isp_video_streamon, + .vidioc_streamoff = isp_video_streamoff, +}; + +int fimc_isp_video_device_register(struct fimc_isp *isp, + struct v4l2_device *v4l2_dev, + enum v4l2_buf_type type) +{ + struct vb2_queue *q = &isp->video_capture.vb_queue; + struct fimc_is_video *iv; + struct video_device *vdev; + int ret; + + if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + iv = &isp->video_capture; + else + return -ENOSYS; + + mutex_init(&isp->video_lock); + INIT_LIST_HEAD(&iv->pending_buf_q); + INIT_LIST_HEAD(&iv->active_buf_q); + iv->format = fimc_isp_find_format(NULL, NULL, 0); + iv->pixfmt.width = IS_DEFAULT_WIDTH; + iv->pixfmt.height = IS_DEFAULT_HEIGHT; + iv->pixfmt.pixelformat = iv->format->fourcc; + iv->pixfmt.colorspace = V4L2_COLORSPACE_SRGB; + iv->reqbufs_count = 0; + + memset(q, 0, sizeof(*q)); + q->type = type; + q->io_modes = VB2_MMAP | VB2_USERPTR; + q->ops = &isp_video_capture_qops; + q->mem_ops = &vb2_dma_contig_memops; + q->buf_struct_size = sizeof(struct isp_video_buf); + q->drv_priv = isp; + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; + q->lock = &isp->video_lock; + + ret = vb2_queue_init(q); + if (ret < 0) + return ret; + + vdev = &iv->ve.vdev; + memset(vdev, 0, sizeof(*vdev)); + snprintf(vdev->name, sizeof(vdev->name), "fimc-is-isp.%s", + type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE ? + "capture" : "output"); + vdev->queue = q; + vdev->fops = &isp_video_fops; + vdev->ioctl_ops = &isp_video_ioctl_ops; + vdev->v4l2_dev = v4l2_dev; + vdev->minor = -1; + vdev->release = video_device_release_empty; + vdev->lock = &isp->video_lock; + + iv->pad.flags = MEDIA_PAD_FL_SINK; + ret = media_entity_init(&vdev->entity, 1, &iv->pad, 0); + if (ret < 0) + return ret; + + video_set_drvdata(vdev, isp); + + ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); + if (ret < 0) { + media_entity_cleanup(&vdev->entity); + return ret; + } + + v4l2_info(v4l2_dev, "Registered %s as /dev/%s\n", + vdev->name, video_device_node_name(vdev)); + + return 0; +} + +void fimc_isp_video_device_unregister(struct fimc_isp *isp, + enum v4l2_buf_type type) +{ + struct exynos_video_entity *ve; + + if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) + ve = &isp->video_capture.ve; + else + return; + + mutex_lock(&isp->video_lock); + + if (video_is_registered(&ve->vdev)) { + video_unregister_device(&ve->vdev); + media_entity_cleanup(&ve->vdev.entity); + ve->pipe = NULL; + } + + mutex_unlock(&isp->video_lock); +} diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.h b/drivers/media/platform/exynos4-is/fimc-isp-video.h new file mode 100644 index 00000000000..98c662654bb --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-isp-video.h @@ -0,0 +1,44 @@ +/* + * Samsung EXYNOS4x12 FIMC-IS (Imaging Subsystem) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef FIMC_ISP_VIDEO__ +#define FIMC_ISP_VIDEO__ + +#include +#include "fimc-isp.h" + +#ifdef CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE +int fimc_isp_video_device_register(struct fimc_isp *isp, + struct v4l2_device *v4l2_dev, + enum v4l2_buf_type type); + +void fimc_isp_video_device_unregister(struct fimc_isp *isp, + enum v4l2_buf_type type); + +void fimc_isp_video_irq_handler(struct fimc_is *is); +#else +static inline void fimc_isp_video_irq_handler(struct fimc_is *is) +{ +} + +static inline int fimc_isp_video_device_register(struct fimc_isp *isp, + struct v4l2_device *v4l2_dev, + enum v4l2_buf_type type) +{ + return 0; +} + +void fimc_isp_video_device_unregister(struct fimc_isp *isp, + enum v4l2_buf_type type) +{ +} +#endif /* !CONFIG_VIDEO_EXYNOS4_ISP_DMA_CAPTURE */ + +#endif /* FIMC_ISP_VIDEO__ */ diff --git a/drivers/media/platform/exynos4-is/fimc-isp.c b/drivers/media/platform/exynos4-is/fimc-isp.c index f3c6136aa5b..be62d6b9ac4 100644 --- a/drivers/media/platform/exynos4-is/fimc-isp.c +++ b/drivers/media/platform/exynos4-is/fimc-isp.c @@ -25,6 +25,7 @@ #include #include "media-dev.h" +#include "fimc-isp-video.h" #include "fimc-is-command.h" #include "fimc-is-param.h" #include "fimc-is-regs.h" @@ -93,8 +94,8 @@ void fimc_isp_irq_handler(struct fimc_is *is) is->i2h_cmd.args[1] = mcuctl_read(is, MCUCTL_REG_ISSR(21)); fimc_is_fw_clear_irq1(is, FIMC_IS_INT_FRAME_DONE_ISP); + fimc_isp_video_irq_handler(is); - /* TODO: Complete ISP DMA interrupt handler */ wake_up(&is->irq_queue); } @@ -388,7 +389,33 @@ static int fimc_isp_subdev_open(struct v4l2_subdev *sd, return 0; } +static int fimc_isp_subdev_registered(struct v4l2_subdev *sd) +{ + struct fimc_isp *isp = v4l2_get_subdevdata(sd); + int ret; + + /* Use pipeline object allocated by the media device. */ + isp->video_capture.ve.pipe = v4l2_get_subdev_hostdata(sd); + + ret = fimc_isp_video_device_register(isp, sd->v4l2_dev, + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE); + if (ret < 0) + isp->video_capture.ve.pipe = NULL; + + return ret; +} + +static void fimc_isp_subdev_unregistered(struct v4l2_subdev *sd) +{ + struct fimc_isp *isp = v4l2_get_subdevdata(sd); + + fimc_isp_video_device_unregister(isp, + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE); +} + static const struct v4l2_subdev_internal_ops fimc_is_subdev_internal_ops = { + .registered = fimc_isp_subdev_registered, + .unregistered = fimc_isp_subdev_unregistered, .open = fimc_isp_subdev_open, }; diff --git a/drivers/media/platform/exynos4-is/fimc-isp.h b/drivers/media/platform/exynos4-is/fimc-isp.h index 03bf95ab017..4dc55a18d97 100644 --- a/drivers/media/platform/exynos4-is/fimc-isp.h +++ b/drivers/media/platform/exynos4-is/fimc-isp.h @@ -35,17 +35,18 @@ extern int fimc_isp_debug; #define FIMC_ISP_SINK_WIDTH_MIN (16 + 8) #define FIMC_ISP_SINK_HEIGHT_MIN (12 + 8) #define FIMC_ISP_SOURCE_WIDTH_MIN 8 -#define FIMC_ISP_SOURC_HEIGHT_MIN 8 +#define FIMC_ISP_SOURCE_HEIGHT_MIN 8 #define FIMC_ISP_CAC_MARGIN_WIDTH 16 #define FIMC_ISP_CAC_MARGIN_HEIGHT 12 #define FIMC_ISP_SINK_WIDTH_MAX (4000 - 16) #define FIMC_ISP_SINK_HEIGHT_MAX (4000 + 12) #define FIMC_ISP_SOURCE_WIDTH_MAX 4000 -#define FIMC_ISP_SOURC_HEIGHT_MAX 4000 +#define FIMC_ISP_SOURCE_HEIGHT_MAX 4000 #define FIMC_ISP_NUM_FORMATS 3 #define FIMC_ISP_REQ_BUFS_MIN 2 +#define FIMC_ISP_REQ_BUFS_MAX 32 #define FIMC_ISP_SD_PAD_SINK 0 #define FIMC_ISP_SD_PAD_SRC_FIFO 1 @@ -100,6 +101,16 @@ struct fimc_isp_ctrls { struct v4l2_ctrl *colorfx; }; +struct isp_video_buf { + struct vb2_buffer vb; + dma_addr_t dma_addr[FIMC_ISP_MAX_PLANES]; + unsigned int index; +}; + +#define to_isp_video_buf(_b) container_of(_b, struct isp_video_buf, vb) + +#define FIMC_ISP_MAX_BUFS 4 + /** * struct fimc_is_video - fimc-is video device structure * @vdev: video_device structure @@ -114,18 +125,26 @@ struct fimc_isp_ctrls { * @format: current pixel format */ struct fimc_is_video { - struct video_device vdev; + struct exynos_video_entity ve; enum v4l2_buf_type type; struct media_pad pad; struct list_head pending_buf_q; struct list_head active_buf_q; struct vb2_queue vb_queue; - unsigned int frame_count; unsigned int reqbufs_count; + unsigned int buf_count; + unsigned int buf_mask; + unsigned int frame_count; int streaming; + struct isp_video_buf *buffers[FIMC_ISP_MAX_BUFS]; const struct fimc_fmt *format; + struct v4l2_pix_format_mplane pixfmt; }; +/* struct fimc_isp:state bit definitions */ +#define ST_ISP_VID_CAP_BUF_PREP 0 +#define ST_ISP_VID_CAP_STREAMING 1 + /** * struct fimc_isp - FIMC-IS ISP data structure * @pdev: pointer to FIMC-IS platform device diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c index c670d67001f..9bec34c4ac9 100644 --- a/drivers/media/platform/exynos4-is/media-dev.c +++ b/drivers/media/platform/exynos4-is/media-dev.c @@ -684,8 +684,16 @@ static int register_csis_entity(struct fimc_md *fmd, static int register_fimc_is_entity(struct fimc_md *fmd, struct fimc_is *is) { struct v4l2_subdev *sd = &is->isp.subdev; + struct exynos_media_pipeline *ep; int ret; + /* Allocate pipeline object for the ISP capture video node. */ + ep = fimc_md_pipeline_create(fmd); + if (!ep) + return -ENOMEM; + + v4l2_set_subdev_hostdata(sd, ep); + ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); if (ret) { v4l2_err(&fmd->v4l2_dev, @@ -959,16 +967,17 @@ static int __fimc_md_create_flite_source_links(struct fimc_md *fmd) /* Create FIMC-IS links */ static int __fimc_md_create_fimc_is_links(struct fimc_md *fmd) { + struct fimc_isp *isp = &fmd->fimc_is->isp; struct media_entity *source, *sink; int i, ret; - source = &fmd->fimc_is->isp.subdev.entity; + source = &isp->subdev.entity; for (i = 0; i < FIMC_MAX_DEVS; i++) { if (fmd->fimc[i] == NULL) continue; - /* Link from IS-ISP subdev to FIMC */ + /* Link from FIMC-IS-ISP subdev to FIMC */ sink = &fmd->fimc[i]->vid_cap.subdev.entity; ret = media_entity_create_link(source, FIMC_ISP_SD_PAD_SRC_FIFO, sink, FIMC_SD_PAD_SINK_FIFO, 0); @@ -976,7 +985,15 @@ static int __fimc_md_create_fimc_is_links(struct fimc_md *fmd) return ret; } - return ret; + /* Link from FIMC-IS-ISP subdev to fimc-is-isp.capture video node */ + sink = &isp->video_capture.ve.vdev.entity; + + /* Skip this link if the fimc-is-isp video node driver isn't built-in */ + if (sink->num_pads == 0) + return 0; + + return media_entity_create_link(source, FIMC_ISP_SD_PAD_SRC_DMA, + sink, 0, 0); } /** -- cgit v1.2.3-70-g09d2 From 9982d82eecb37956a4c70293b304b546c6207b70 Mon Sep 17 00:00:00 2001 From: Jacek Anaszewski Date: Thu, 16 Jan 2014 08:26:32 -0300 Subject: [media] s5p-jpeg: Fix broken indentation in jpeg-regs.h Signed-off-by: Jacek Anaszewski Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/s5p-jpeg/jpeg-regs.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/media/platform/s5p-jpeg/jpeg-regs.h b/drivers/media/platform/s5p-jpeg/jpeg-regs.h index 33f2c7374cf..57fb05bb8c7 100644 --- a/drivers/media/platform/s5p-jpeg/jpeg-regs.h +++ b/drivers/media/platform/s5p-jpeg/jpeg-regs.h @@ -210,19 +210,19 @@ /* JPEG CNTL Register bit */ #define EXYNOS4_ENC_DEC_MODE_MASK (0xfffffffc << 0) -#define EXYNOS4_DEC_MODE (1 << 0) -#define EXYNOS4_ENC_MODE (1 << 1) +#define EXYNOS4_DEC_MODE (1 << 0) +#define EXYNOS4_ENC_MODE (1 << 1) #define EXYNOS4_AUTO_RST_MARKER (1 << 2) #define EXYNOS4_RST_INTERVAL_SHIFT 3 #define EXYNOS4_RST_INTERVAL(x) (((x) & 0xffff) \ << EXYNOS4_RST_INTERVAL_SHIFT) #define EXYNOS4_HUF_TBL_EN (1 << 19) #define EXYNOS4_HOR_SCALING_SHIFT 20 -#define EXYNOS4_HOR_SCALING_MASK (3 << EXYNOS4_HOR_SCALING_SHIFT) +#define EXYNOS4_HOR_SCALING_MASK (3 << EXYNOS4_HOR_SCALING_SHIFT) #define EXYNOS4_HOR_SCALING(x) (((x) & 0x3) \ << EXYNOS4_HOR_SCALING_SHIFT) #define EXYNOS4_VER_SCALING_SHIFT 22 -#define EXYNOS4_VER_SCALING_MASK (3 << EXYNOS4_VER_SCALING_SHIFT) +#define EXYNOS4_VER_SCALING_MASK (3 << EXYNOS4_VER_SCALING_SHIFT) #define EXYNOS4_VER_SCALING(x) (((x) & 0x3) \ << EXYNOS4_VER_SCALING_SHIFT) #define EXYNOS4_PADDING (1 << 27) @@ -238,8 +238,8 @@ #define EXYNOS4_FRAME_ERR_EN (1 << 4) #define EXYNOS4_INT_EN_ALL (0x1f << 0) -#define EXYNOS4_MOD_REG_PROC_ENC (0 << 3) -#define EXYNOS4_MOD_REG_PROC_DEC (1 << 3) +#define EXYNOS4_MOD_REG_PROC_ENC (0 << 3) +#define EXYNOS4_MOD_REG_PROC_DEC (1 << 3) #define EXYNOS4_MOD_REG_SUBSAMPLE_444 (0 << 0) #define EXYNOS4_MOD_REG_SUBSAMPLE_422 (1 << 0) @@ -270,7 +270,7 @@ #define EXYNOS4_DEC_YUV_420_IMG (4 << 0) #define EXYNOS4_GRAY_IMG_IP_SHIFT 3 -#define EXYNOS4_GRAY_IMG_IP_MASK (7 << EXYNOS4_GRAY_IMG_IP_SHIFT) +#define EXYNOS4_GRAY_IMG_IP_MASK (7 << EXYNOS4_GRAY_IMG_IP_SHIFT) #define EXYNOS4_GRAY_IMG_IP (4 << EXYNOS4_GRAY_IMG_IP_SHIFT) #define EXYNOS4_RGB_IP_SHIFT 6 @@ -278,18 +278,18 @@ #define EXYNOS4_RGB_IP_RGB_16BIT_IMG (4 << EXYNOS4_RGB_IP_SHIFT) #define EXYNOS4_RGB_IP_RGB_32BIT_IMG (5 << EXYNOS4_RGB_IP_SHIFT) -#define EXYNOS4_YUV_444_IP_SHIFT 9 +#define EXYNOS4_YUV_444_IP_SHIFT 9 #define EXYNOS4_YUV_444_IP_MASK (7 << EXYNOS4_YUV_444_IP_SHIFT) #define EXYNOS4_YUV_444_IP_YUV_444_2P_IMG (4 << EXYNOS4_YUV_444_IP_SHIFT) #define EXYNOS4_YUV_444_IP_YUV_444_3P_IMG (5 << EXYNOS4_YUV_444_IP_SHIFT) -#define EXYNOS4_YUV_422_IP_SHIFT 12 +#define EXYNOS4_YUV_422_IP_SHIFT 12 #define EXYNOS4_YUV_422_IP_MASK (7 << EXYNOS4_YUV_422_IP_SHIFT) #define EXYNOS4_YUV_422_IP_YUV_422_1P_IMG (4 << EXYNOS4_YUV_422_IP_SHIFT) #define EXYNOS4_YUV_422_IP_YUV_422_2P_IMG (5 << EXYNOS4_YUV_422_IP_SHIFT) #define EXYNOS4_YUV_422_IP_YUV_422_3P_IMG (6 << EXYNOS4_YUV_422_IP_SHIFT) -#define EXYNOS4_YUV_420_IP_SHIFT 15 +#define EXYNOS4_YUV_420_IP_SHIFT 15 #define EXYNOS4_YUV_420_IP_MASK (7 << EXYNOS4_YUV_420_IP_SHIFT) #define EXYNOS4_YUV_420_IP_YUV_420_2P_IMG (4 << EXYNOS4_YUV_420_IP_SHIFT) #define EXYNOS4_YUV_420_IP_YUV_420_3P_IMG (5 << EXYNOS4_YUV_420_IP_SHIFT) @@ -303,8 +303,8 @@ #define EXYNOS4_JPEG_DECODED_IMG_FMT_MASK 0x03 -#define EXYNOS4_SWAP_CHROMA_CRCB (1 << 26) -#define EXYNOS4_SWAP_CHROMA_CBCR (0 << 26) +#define EXYNOS4_SWAP_CHROMA_CRCB (1 << 26) +#define EXYNOS4_SWAP_CHROMA_CBCR (0 << 26) /* JPEG HUFF count Register bit */ #define EXYNOS4_HUFF_COUNT_MASK 0xffff -- cgit v1.2.3-70-g09d2 From 97e9858ed5525af5355769cd98b25b5ec94c0c85 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Wed, 12 Feb 2014 07:08:49 -0300 Subject: [media] s5p-fimc: Remove reference to outdated macro The Kconfig symbol S5P_SETUP_MIPIPHY was removed in v3.13. Remove a reference to its macro from a list of Kconfig options. Signed-off-by: Paul Bolle Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/fimc.txt | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/Documentation/video4linux/fimc.txt b/Documentation/video4linux/fimc.txt index e51f1b5b732..7d6e160724b 100644 --- a/Documentation/video4linux/fimc.txt +++ b/Documentation/video4linux/fimc.txt @@ -151,9 +151,8 @@ CONFIG_S5P_DEV_FIMC1 \ CONFIG_S5P_DEV_FIMC2 | optional CONFIG_S5P_DEV_FIMC3 | CONFIG_S5P_SETUP_FIMC / -CONFIG_S5P_SETUP_MIPIPHY \ -CONFIG_S5P_DEV_CSIS0 | optional for MIPI-CSI interface -CONFIG_S5P_DEV_CSIS1 / +CONFIG_S5P_DEV_CSIS0 \ optional for MIPI-CSI interface +CONFIG_S5P_DEV_CSIS1 / Except that, relevant s5p_device_fimc? should be registered in the machine code in addition to a "s5p-fimc-md" platform device to which the media device driver -- cgit v1.2.3-70-g09d2