From 51834901faee2850e55865589cefd7588202cbf7 Mon Sep 17 00:00:00 2001 From: Dmitry Artamonow Date: Fri, 27 Nov 2009 12:07:11 +0100 Subject: ARM: 5817/1: SA1100: h3100/h3600: configure all unused gpios as inputs After conversion to gpiolib there's still some GPIOs left, that get configured in *_mach_init() as outputs (using direct operations on GPCR/GPDR registers), but otherwise unused. These GPIOs are mainly sound related and should be configured by corresponding driver once it is written. Drop this initialisation and configure all GPIOs as input. Signed-off-by: Dmitry Artamonow Signed-off-by: Russell King --- arch/arm/mach-sa1100/h3600.c | 26 +++----------------------- 1 file changed, 3 insertions(+), 23 deletions(-) diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 6792dd14b6e..3d52190a269 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -297,20 +297,14 @@ static void __init h3xxx_map_io(void) PCFR = PCFR_OPDE; PSDR = 0; + GPCR = 0x0fffffff; /* All outputs are set low by default */ + GPDR = 0; /* Configure all GPIOs as input */ } /************************* H3100 *************************/ #ifdef CONFIG_SA1100_H3100 -#define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON \ - | GPIO_H3100_GPIO3 \ - | GPIO_H3100_QMUTE \ - | GPIO_H3100_LCD_3V_ON \ - | GPIO_H3100_AUD_ON \ - | GPIO_H3100_AUD_PWR_ON \ - | GPIO_H3100_IR_ON \ - | GPIO_H3100_IR_FSEL) /* * helper for sa1100fb */ @@ -330,16 +324,9 @@ static void __init h3100_map_io(void) sa1100fb_lcd_power = h3100_lcd_power; - /* Initialize h3100-specific values here */ - GPCR = 0x0fffffff; /* All outputs are set low by default */ - GPDR = GPIO_H3600_L3_CLOCK | - GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA | - GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 | - H3100_DIRECT_EGPIO; - /* Older bootldrs put GPIO2-9 in alternate mode on the assumption that they are used for video */ - GAFR &= ~H3100_DIRECT_EGPIO; + GAFR &= ~0x000001fb; } /* @@ -424,13 +411,6 @@ static void __init h3600_map_io(void) h3xxx_map_io(); sa1100fb_lcd_power = h3600_lcd_power; - - /* Initialize h3600-specific values here */ - - GPCR = 0x0fffffff; /* All outputs are set low by default */ - GPDR = GPIO_H3600_L3_CLOCK | - GPIO_H3600_L3_MODE | GPIO_H3600_L3_DATA | - GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0; } /* -- cgit v1.2.3-70-g09d2