From 569a50ca3f56cd69199733580e7ca0e81029473a Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Wed, 21 Nov 2007 16:35:57 +0800 Subject: Blackfin arch: Ensure we printk out strings with the proper loglevel Signed-off-by: Robin Getz Signed-off-by: Bryan Wu --- arch/blackfin/kernel/traps.c | 30 +++++------ arch/blackfin/mach-common/irqpanic.c | 10 ++-- include/asm-blackfin/traps.h | 96 +++++++++++++++++++++++++++--------- 3 files changed, 94 insertions(+), 42 deletions(-) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index cecf3a29ebb..d88098c58bf 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -250,7 +250,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_EXCPT03: info.si_code = SEGV_STACKFLOW; sig = SIGSEGV; - printk(KERN_NOTICE EXC_0x03); + printk(KERN_NOTICE EXC_0x03(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x04 - User Defined, Caught by default */ @@ -279,7 +279,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_OVFLOW: info.si_code = TRAP_TRACEFLOW; sig = SIGTRAP; - printk(KERN_NOTICE EXC_0x11); + printk(KERN_NOTICE EXC_0x11(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x12 - Reserved, Caught by default */ @@ -301,35 +301,35 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_UNDEF_I: info.si_code = ILL_ILLOPC; sig = SIGILL; - printk(KERN_NOTICE EXC_0x21); + printk(KERN_NOTICE EXC_0x21(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x22 - Illegal Instruction Combination, handled here */ case VEC_ILGAL_I: info.si_code = ILL_ILLPARAOP; sig = SIGILL; - printk(KERN_NOTICE EXC_0x22); + printk(KERN_NOTICE EXC_0x22(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x23 - Data CPLB protection violation, handled here */ case VEC_CPLB_VL: info.si_code = ILL_CPLB_VI; sig = SIGBUS; - printk(KERN_NOTICE EXC_0x23); + printk(KERN_NOTICE EXC_0x23(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x24 - Data access misaligned, handled here */ case VEC_MISALI_D: info.si_code = BUS_ADRALN; sig = SIGBUS; - printk(KERN_NOTICE EXC_0x24); + printk(KERN_NOTICE EXC_0x24(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x25 - Unrecoverable Event, handled here */ case VEC_UNCOV: info.si_code = ILL_ILLEXCPT; sig = SIGILL; - printk(KERN_NOTICE EXC_0x25); + printk(KERN_NOTICE EXC_0x25(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x26 - Data CPLB Miss, normal case is handled in _cplb_hdr, @@ -337,7 +337,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_CPLB_M: info.si_code = BUS_ADRALN; sig = SIGBUS; - printk(KERN_NOTICE EXC_0x26); + printk(KERN_NOTICE EXC_0x26(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */ @@ -348,7 +348,7 @@ asmlinkage void trap_c(struct pt_regs *fp) printk(KERN_NOTICE "NULL pointer access (probably)\n"); #else sig = SIGILL; - printk(KERN_NOTICE EXC_0x27); + printk(KERN_NOTICE EXC_0x27(KERN_NOTICE)); #endif CHK_DEBUGGER_TRAP(); break; @@ -356,7 +356,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_WATCH: info.si_code = TRAP_WATCHPT; sig = SIGTRAP; - pr_debug(EXC_0x28); + pr_debug(EXC_0x28(KERN_DEBUG)); CHK_DEBUGGER_TRAP_MAYBE(); /* Check if this is a watchpoint in kernel space */ if (fp->ipend & 0xffc0) @@ -378,21 +378,21 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_MISALI_I: info.si_code = BUS_ADRALN; sig = SIGBUS; - printk(KERN_NOTICE EXC_0x2A); + printk(KERN_NOTICE EXC_0x2A(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x2B - Instruction CPLB protection violation, handled here */ case VEC_CPLB_I_VL: info.si_code = ILL_CPLB_VI; sig = SIGBUS; - printk(KERN_NOTICE EXC_0x2B); + printk(KERN_NOTICE EXC_0x2B(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x2C - Instruction CPLB miss, handled in _cplb_hdr */ case VEC_CPLB_I_M: info.si_code = ILL_CPLB_MISS; sig = SIGBUS; - printk(KERN_NOTICE EXC_0x2C); + printk(KERN_NOTICE EXC_0x2C(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x2D - Instruction CPLB Multiple Hits, handled here */ @@ -403,7 +403,7 @@ asmlinkage void trap_c(struct pt_regs *fp) printk(KERN_NOTICE "Jump to address 0 - 0x0fff\n"); #else sig = SIGILL; - printk(KERN_NOTICE EXC_0x2D); + printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE)); #endif CHK_DEBUGGER_TRAP(); break; @@ -411,7 +411,7 @@ asmlinkage void trap_c(struct pt_regs *fp) case VEC_ILL_RES: info.si_code = ILL_PRVOPC; sig = SIGILL; - printk(KERN_NOTICE EXC_0x2E); + printk(KERN_NOTICE EXC_0x2E(KERN_NOTICE)); CHK_DEBUGGER_TRAP(); break; /* 0x2F - Reserved, Caught by default */ diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c index f05e3dadaf3..d62c2e277d7 100644 --- a/arch/blackfin/mach-common/irqpanic.c +++ b/arch/blackfin/mach-common/irqpanic.c @@ -153,21 +153,21 @@ asmlinkage void irq_panic(int reason, struct pt_regs *regs) case (SEQSTAT_HWERRCAUSE_SYSTEM_MMR): /* System MMR Error */ info.si_code = BUS_ADRALN; sig = SIGBUS; - printk(KERN_EMERG HWC_x2); + printk(KERN_EMERG HWC_x2(KERN_EMERG)); break; case (SEQSTAT_HWERRCAUSE_EXTERN_ADDR): /* External Memory Addressing Error */ info.si_code = BUS_ADRERR; sig = SIGBUS; - printk(KERN_EMERG HWC_x3); + printk(KERN_EMERG HWC_x3(KERN_EMERG)); break; case (SEQSTAT_HWERRCAUSE_PERF_FLOW): /* Performance Monitor Overflow */ - printk(KERN_EMERG HWC_x12); + printk(KERN_EMERG HWC_x12(KERN_EMERG)); break; case (SEQSTAT_HWERRCAUSE_RAISE_5): /* RAISE 5 instruction */ - printk(KERN_EMERG HWC_x18); + printk(KERN_EMERG HWC_x18(KERN_EMERG)); break; default: /* Reserved */ - printk(KERN_EMERG HWC_default); + printk(KERN_EMERG HWC_default(KERN_EMERG)); break; } } diff --git a/include/asm-blackfin/traps.h b/include/asm-blackfin/traps.h index fe365b1b7ca..ee1cbf73a9a 100644 --- a/include/asm-blackfin/traps.h +++ b/include/asm-blackfin/traps.h @@ -48,28 +48,80 @@ #ifndef __ASSEMBLY__ -#define HWC_x2 "System MMR Error\nAn error occurred due to an invalid access to an System MMR location\nPossible reason: a 32-bit register is accessed with a 16-bit instruction,\nor a 16-bit register is accessed with a 32-bit instruction.\n" -#define HWC_x3 "External Memory Addressing Error\n" -#define HWC_x12 "Performance Monitor Overflow\n" -#define HWC_x18 "RAISE 5 instruction\n Software issued a RAISE 5 instruction to invoke the Hardware\n" -#define HWC_default "Reserved\n" - -#define EXC_0x03 "Application stack overflow\n - Please increase the stack size of the application using elf2flt -s option,\n and/or reduce the stack use of the application.\n" -#define EXC_0x10 "Single step\n - When the processor is in single step mode, every instruction\n generates an exception. Primarily used for debugging.\n" -#define EXC_0x11 "Exception caused by a trace buffer full condition\n - The processor takes this exception when the trace\n buffer overflows (only when enabled by the Trace Unit Control register).\n" -#define EXC_0x21 "Undefined instruction\n - May be used to emulate instructions that are not defined for\n a particular processor implementation.\n" -#define EXC_0x22 "Illegal instruction combination\n - See section for multi-issue rules in the ADSP-BF53x Blackfin\n Processor Instruction Set Reference.\n" -#define EXC_0x23 "Data access CPLB protection violation\n - Attempted read or write to Supervisor resource,\n or illegal data memory access. \n" -#define EXC_0x24 "Data access misaligned address violation\n - Attempted misaligned data memory or data cache access.\n" -#define EXC_0x25 "Unrecoverable event\n - For example, an exception generated while processing a previous exception.\n" -#define EXC_0x26 "Data access CPLB miss\n - Used by the MMU to signal a CPLB miss on a data access.\n" -#define EXC_0x27 "Data access multiple CPLB hits\n - More than one CPLB entry matches data fetch address.\n" -#define EXC_0x28 "Program Sequencer Exception caused by an emulation watchpoint match\n - There is a watchpoint match, and one of the EMUSW\n bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n" -#define EXC_0x2A "Instruction fetch misaligned address violation\n - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch exception,\n the return address provided in RETX is the destination address which is misaligned, rather than the address of the offending instruction.\n" -#define EXC_0x2B "CPLB protection violation\n - Illegal instruction fetch access (memory protection violation).\n" -#define EXC_0x2C "Instruction fetch CPLB miss\n - CPLB miss on an instruction fetch.\n" -#define EXC_0x2D "Instruction fetch multiple CPLB hits\n - More than one CPLB entry matches instruction fetch address.\n" -#define EXC_0x2E "Illegal use of supervisor resource\n - Attempted to use a Supervisor register or instruction from User mode.\n Supervisor resources are registers and instructions that are reserved\n for Supervisor use: Supervisor only registers, all MMRs, and Supervisor\n only instructions.\n" +#define HWC_x2(level) \ + "System MMR Error\n" \ + level " - An error occurred due to an invalid access to an System MMR location\n" \ + level " Possible reason: a 32-bit register is accessed with a 16-bit instruction\n" \ + level " or a 16-bit register is accessed with a 32-bit instruction.\n" +#define HWC_x3(level) \ + "External Memory Addressing Error\n" +#define HWC_x12(level) \ + "Performance Monitor Overflow\n" +#define HWC_x18(level) \ + "RAISE 5 instruction\n" \ + level " Software issued a RAISE 5 instruction to invoke the Hardware\n" +#define HWC_default(level) \ + "Reserved\n" +#define EXC_0x03(level) \ + "Application stack overflow\n" \ + level " - Please increase the stack size of the application using elf2flt -s option,\n" \ + level " and/or reduce the stack use of the application.\n" +#define EXC_0x10(level) \ + "Single step\n" \ + level " - When the processor is in single step mode, every instruction\n" \ + level " generates an exception. Primarily used for debugging.\n" +#define EXC_0x11(level) \ + "Exception caused by a trace buffer full condition\n" \ + level " - The processor takes this exception when the trace\n" \ + level " buffer overflows (only when enabled by the Trace Unit Control register).\n" +#define EXC_0x21(level) \ + "Undefined instruction\n" \ + level " - May be used to emulate instructions that are not defined for\n" \ + level " a particular processor implementation.\n" +#define EXC_0x22(level) \ + "Illegal instruction combination\n" \ + level " - See section for multi-issue rules in the ADSP-BF53x Blackfin\n" \ + level " Processor Instruction Set Reference.\n" +#define EXC_0x23(level) \ + "Data access CPLB protection violation\n" \ + level " - Attempted read or write to Supervisor resource,\n" \ + level " or illegal data memory access. \n" +#define EXC_0x24(level) \ + "Data access misaligned address violation\n" \ + level " - Attempted misaligned data memory or data cache access.\n" +#define EXC_0x25(level) \ + "Unrecoverable event\n" \ + level " - For example, an exception generated while processing a previous exception.\n" +#define EXC_0x26(level) \ + "Data access CPLB miss\n" \ + level " - Used by the MMU to signal a CPLB miss on a data access.\n" +#define EXC_0x27(level) \ + "Data access multiple CPLB hits\n" \ + level " - More than one CPLB entry matches data fetch address.\n" +#define EXC_0x28(level) \ + "Program Sequencer Exception caused by an emulation watchpoint match\n" \ + level " - There is a watchpoint match, and one of the EMUSW\n" \ + level " bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n" +#define EXC_0x2A(level) \ + "Instruction fetch misaligned address violation\n" \ + level " - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch\n" \ + level " exception, the return address provided in RETX is the destination address which is\n" \ + level " misaligned, rather than the address of the offending instruction.\n" +#define EXC_0x2B(level) \ + "CPLB protection violation\n" \ + level " - Illegal instruction fetch access (memory protection violation).\n" +#define EXC_0x2C(level) \ + "Instruction fetch CPLB miss\n" \ + level " - CPLB miss on an instruction fetch.\n" +#define EXC_0x2D(level) \ + "Instruction fetch multiple CPLB hits\n" \ + level " - More than one CPLB entry matches instruction fetch address.\n" +#define EXC_0x2E(level) \ + "Illegal use of supervisor resource\n" \ + level " - Attempted to use a Supervisor register or instruction from User mode.\n" \ + level " Supervisor resources are registers and instructions that are reserved\n" \ + level " for Supervisor use: Supervisor only registers, all MMRs, and Supervisor\n" \ + level " only instructions.\n" #endif /* __ASSEMBLY__ */ #endif /* _BFIN_TRAPS_H */ -- cgit v1.2.3-70-g09d2