From 5bc75728fd43bb15b46f16ef465bcf9d487393cf Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 11 Sep 2008 00:01:51 +0200 Subject: mac80211: fix scan vs. interface removal race When we remove an interface, we can currently end up having a pointer to it left in local->scan_sdata after it has been set down, and then with a hardware scan the scan completion can try to access it which is a bug. Alternatively, a scan that started as a hardware scan may terminate as though it was a software scan, if the timing is just right. On SMP systems, software scan also has a similar problem, just canceling the delayed work and setting a flag isn't enough since it may be running concurrently; in this case we would also never restore state of other interfaces. This patch hopefully fixes the problems by always invoking ieee80211_scan_completed or requiring it to be invoked by the driver, I suspect the drivers that have ->hw_scan() are buggy. The bug will not manifest itself unless you remove the interface while hw-scanning which will also turn off the hw, and then add a new interface which will be unusable until you scan once. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 4 +++- net/mac80211/main.c | 33 +++++++++++++++++++++++++-------- net/mac80211/mlme.c | 2 +- net/mac80211/scan.c | 38 +++++++++++++++++++++++++++----------- 4 files changed, 56 insertions(+), 21 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index f504e3eca7d..d67882dd360 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1124,7 +1124,9 @@ enum ieee80211_ampdu_mlme_action { * @hw_scan: Ask the hardware to service the scan request, no need to start * the scan state machine in stack. The scan must honour the channel * configuration done by the regulatory agent in the wiphy's registered - * bands. + * bands. When the scan finishes, ieee80211_scan_completed() must be + * called; note that it also must be called when the scan cannot finish + * because the hardware is turned off! Anything else is a bug! * * @get_stats: return low-level statistics * diff --git a/net/mac80211/main.c b/net/mac80211/main.c index ebdec7106d6..4bfac4b41c5 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -564,14 +564,6 @@ static int ieee80211_stop(struct net_device *dev) synchronize_rcu(); skb_queue_purge(&sdata->u.sta.skb_queue); - if (local->scan_sdata == sdata) { - if (!local->ops->hw_scan) { - local->sta_sw_scanning = 0; - cancel_delayed_work(&local->scan_work); - } else - local->sta_hw_scanning = 0; - } - sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED; kfree(sdata->u.sta.extra_ie); sdata->u.sta.extra_ie = NULL; @@ -585,6 +577,31 @@ static int ieee80211_stop(struct net_device *dev) } /* fall through */ default: + if (local->scan_sdata == sdata) { + if (!local->ops->hw_scan) + cancel_delayed_work_sync(&local->scan_work); + /* + * The software scan can no longer run now, so we can + * clear out the scan_sdata reference. However, the + * hardware scan may still be running. The complete + * function must be prepared to handle a NULL value. + */ + local->scan_sdata = NULL; + /* + * The memory barrier guarantees that another CPU + * that is hardware-scanning will now see the fact + * that this interface is gone. + */ + smp_mb(); + /* + * If software scanning, complete the scan but since + * the scan_sdata is NULL already don't send out a + * scan event to userspace -- the scan is incomplete. + */ + if (local->sta_sw_scanning) + ieee80211_scan_completed(&local->hw); + } + conf.vif = &sdata->vif; conf.type = sdata->vif.type; conf.mac_addr = dev->dev_addr; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 9e20a0c20a4..19c7f21e49d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2530,7 +2530,7 @@ void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local) struct ieee80211_sub_if_data *sdata = local->scan_sdata; struct ieee80211_if_sta *ifsta; - if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { + if (sdata && sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { ifsta = &sdata->u.sta; if (!(ifsta->flags & IEEE80211_STA_BSSID_SET) || (!(ifsta->state == IEEE80211_STA_MLME_IBSS_JOINED) && diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index f4399e9ac92..27727027d76 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -430,9 +430,20 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw) struct ieee80211_sub_if_data *sdata; union iwreq_data wrqu; + if (WARN_ON(!local->sta_hw_scanning && !local->sta_sw_scanning)) + return; + local->last_scan_completed = jiffies; memset(&wrqu, 0, sizeof(wrqu)); - wireless_send_event(local->scan_sdata->dev, SIOCGIWSCAN, &wrqu, NULL); + + /* + * local->scan_sdata could have been NULLed by the interface + * down code in case we were scanning on an interface that is + * being taken down. + */ + sdata = local->scan_sdata; + if (sdata) + wireless_send_event(sdata->dev, SIOCGIWSCAN, &wrqu, NULL); if (local->sta_hw_scanning) { local->sta_hw_scanning = 0; @@ -491,7 +502,10 @@ void ieee80211_sta_scan_work(struct work_struct *work) int skip; unsigned long next_delay = 0; - if (!local->sta_sw_scanning) + /* + * Avoid re-scheduling when the sdata is going away. + */ + if (!netif_running(sdata->dev)) return; switch (local->scan_state) { @@ -570,9 +584,8 @@ void ieee80211_sta_scan_work(struct work_struct *work) break; } - if (local->sta_sw_scanning) - queue_delayed_work(local->hw.workqueue, &local->scan_work, - next_delay); + queue_delayed_work(local->hw.workqueue, &local->scan_work, + next_delay); } @@ -609,13 +622,16 @@ int ieee80211_sta_start_scan(struct ieee80211_sub_if_data *scan_sdata, } if (local->ops->hw_scan) { - int rc = local->ops->hw_scan(local_to_hw(local), - ssid, ssid_len); - if (!rc) { - local->sta_hw_scanning = 1; - local->scan_sdata = scan_sdata; + int rc; + + local->sta_hw_scanning = 1; + rc = local->ops->hw_scan(local_to_hw(local), ssid, ssid_len); + if (rc) { + local->sta_hw_scanning = 0; + return rc; } - return rc; + local->scan_sdata = scan_sdata; + return 0; } local->sta_sw_scanning = 1; -- cgit v1.2.3-70-g09d2