From c339dfdd65b52bfd947ab29d1210314a2f6d622d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 30 May 2009 20:06:54 +0200 Subject: ide_pci_generic: add quirk for Netcell ATA RAID We need to explicitly mark words 85-87 as valid ones since firmware doesn't do it. This should fix support for LBA48 and FLUSH CACHE [EXT] command which stopped working after we applied more strict checking of identify words in: commit 942dcd85bf8edf38cdc3745306ca250684d99a61 ("ide: idedisk_supports_lba48() -> ata_id_lba48_enabled()") and commit 4b58f17d7c45a8e5f4acda641bec388398b9c0fa ("ide: ide_id_has_flush_cache() -> ata_id_flush_enabled()") Reported-and-tested-by: "Trevor Hemsley" Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-pci-generic.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c index 61111fd2713..39d4e01f5c9 100644 --- a/drivers/ide/ide-pci-generic.c +++ b/drivers/ide/ide-pci-generic.c @@ -33,6 +33,16 @@ static int ide_generic_all; /* Set to claim all devices */ module_param_named(all_generic_ide, ide_generic_all, bool, 0444); MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers."); +static void netcell_quirkproc(ide_drive_t *drive) +{ + /* mark words 85-87 as valid */ + drive->id[ATA_ID_CSF_DEFAULT] |= 0x4000; +} + +static const struct ide_port_ops netcell_port_ops = { + .quirkproc = netcell_quirkproc, +}; + #define DECLARE_GENERIC_PCI_DEV(extra_flags) \ { \ .name = DRV_NAME, \ @@ -74,6 +84,7 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = { { /* 6: Revolution */ .name = DRV_NAME, + .port_ops = &netcell_port_ops, .host_flags = IDE_HFLAG_CLEAR_SIMPLEX | IDE_HFLAG_TRUST_BIOS_FOR_DMA | IDE_HFLAG_OFF_BOARD, -- cgit v1.2.3-70-g09d2 From 521a415c9f6d4e5463807ce6d36598acabcd204f Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 7 Jun 2009 13:52:50 +0200 Subject: pdc202xx_old: fix 'pdc20246_dma_ops' Commit ac95beedf8bc97b24f9540d4da9952f07221c023 (ide: add struct ide_port_ops (take 2)) erroneously converted the driver's dma_timeout() and dma_lost_irq() methods to call the driver's resetproc() method regardless of whether it was defined for this specific controller while it hadn't been defined and hence called for PDC20246. So the dma_clear() method, the successor of dma_timeout(), shouldn't exist and the dma_lost_irq() method should be standard for PDC20246. Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pdc202xx_old.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index 248a54bd238..8df26302a0b 100644 --- a/drivers/ide/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c @@ -328,9 +328,8 @@ static const struct ide_dma_ops pdc20246_dma_ops = { .dma_start = ide_dma_start, .dma_end = ide_dma_end, .dma_test_irq = pdc202xx_dma_test_irq, - .dma_lost_irq = pdc202xx_dma_lost_irq, + .dma_lost_irq = ide_dma_lost_irq, .dma_timer_expiry = ide_dma_sff_timer_expiry, - .dma_clear = pdc202xx_reset, .dma_sff_read_status = ide_dma_sff_read_status, }; -- cgit v1.2.3-70-g09d2 From 669165daad2ec839df85b8c5f7bc155e76a2f404 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 7 Jun 2009 13:52:50 +0200 Subject: pdc202xx_old: fix resetproc() method pdc202xx_reset() calls pdc202xx_reset_host() twice, for both channels, while that function actually twiddles the single, shared software reset bit -- the net effect is a duplicated reset and horrendous 4 second delay happening not only on a channel reset but also when dma_lost_irq() and dma_clear() methods are called. Fold pdc202xx_reset_host() into pdc202xx_reset(), fix printk(), and move it before the actual reset... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pdc202xx_old.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index 8df26302a0b..b3bc96f930a 100644 --- a/drivers/ide/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c @@ -1,6 +1,6 @@ /* * Copyright (C) 1998-2002 Andre Hedrick - * Copyright (C) 2006-2007 MontaVista Software, Inc. + * Copyright (C) 2006-2007, 2009 MontaVista Software, Inc. * Copyright (C) 2007 Bartlomiej Zolnierkiewicz * * Portions Copyright (C) 1999 Promise Technology, Inc. @@ -227,28 +227,19 @@ somebody_else: return (dma_stat & 4) == 4; /* return 1 if INTR asserted */ } -static void pdc202xx_reset_host (ide_hwif_t *hwif) +static void pdc202xx_reset(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; unsigned long high_16 = hwif->extra_base - 16; u8 udma_speed_flag = inb(high_16 | 0x001f); + printk(KERN_WARNING "PDC202xx: software reset...\n"); + outb(udma_speed_flag | 0x10, high_16 | 0x001f); mdelay(100); outb(udma_speed_flag & ~0x10, high_16 | 0x001f); mdelay(2000); /* 2 seconds ?! */ - printk(KERN_WARNING "PDC202XX: %s channel reset.\n", - hwif->channel ? "Secondary" : "Primary"); -} - -static void pdc202xx_reset (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - ide_hwif_t *mate = hwif->mate; - - pdc202xx_reset_host(hwif); - pdc202xx_reset_host(mate); - ide_set_max_pio(drive); } -- cgit v1.2.3-70-g09d2 From 02c33b123e59cab5771e52a012aeb810500260a2 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 7 Jun 2009 13:52:51 +0200 Subject: partitions: warn about the partition exceeding device capacity The current warning message says only about the kernel's action taken without mentioning the underlying reason behind it. Noticed-by: Robert Hancock Cc: Frans Pop Cc: "Andries E. Brouwer" Cc: Al Viro Emphatically-Acked-by: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- fs/partitions/check.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 99e33ef40be..137a708bb21 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -564,7 +564,8 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev) * creating invalid block devices */ printk(KERN_WARNING - "%s: p%d size %llu limited to end of disk\n", + "%s: p%d size %llu exceeds device capacity, " + "limited to end of disk\n", disk->disk_name, p, (unsigned long long) size); size = get_capacity(disk) - from; } -- cgit v1.2.3-70-g09d2 From db429e9ec0f9dee2d8e50c154f04f29f880fc9d6 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 7 Jun 2009 13:52:52 +0200 Subject: partitions: add ->set_capacity block device method * Add ->set_capacity block device method and use it in rescan_partitions() to attempt enabling native capacity of the device upon detecting the partition which exceeds device capacity. * Add GENHD_FL_NATIVE_CAPACITY flag to try limit attempts of enabling native capacity during partition scan. Together with the consecutive patch implementing ->set_capacity method in ide-gd device driver this allows automatic disabling of Host Protected Area (HPA) if any partitions overlapping HPA are detected. Cc: Robert Hancock Cc: Frans Pop Cc: "Andries E. Brouwer" Acked-by: Al Viro Emphatically-Acked-by: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- fs/partitions/check.c | 43 ++++++++++++++++++++++++++++++++----------- include/linux/blkdev.h | 2 ++ include/linux/genhd.h | 1 + 3 files changed, 35 insertions(+), 11 deletions(-) diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 137a708bb21..4bc2c43fa08 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -546,28 +546,49 @@ int rescan_partitions(struct gendisk *disk, struct block_device *bdev) /* add partitions */ for (p = 1; p < state->limit; p++) { - sector_t size = state->parts[p].size; - sector_t from = state->parts[p].from; + sector_t size, from; +try_scan: + size = state->parts[p].size; if (!size) continue; + + from = state->parts[p].from; if (from >= get_capacity(disk)) { printk(KERN_WARNING "%s: p%d ignored, start %llu is behind the end of the disk\n", disk->disk_name, p, (unsigned long long) from); continue; } + if (from + size > get_capacity(disk)) { - /* - * we can not ignore partitions of broken tables - * created by for example camera firmware, but we - * limit them to the end of the disk to avoid - * creating invalid block devices - */ + struct block_device_operations *bdops = disk->fops; + unsigned long long capacity; + printk(KERN_WARNING - "%s: p%d size %llu exceeds device capacity, " - "limited to end of disk\n", + "%s: p%d size %llu exceeds device capacity, ", disk->disk_name, p, (unsigned long long) size); - size = get_capacity(disk) - from; + + if (bdops->set_capacity && + (disk->flags & GENHD_FL_NATIVE_CAPACITY) == 0) { + printk(KERN_CONT "enabling native capacity\n"); + capacity = bdops->set_capacity(disk, ~0ULL); + disk->flags |= GENHD_FL_NATIVE_CAPACITY; + if (capacity > get_capacity(disk)) { + set_capacity(disk, capacity); + check_disk_size_change(disk, bdev); + bdev->bd_invalidated = 0; + } + goto try_scan; + } else { + /* + * we can not ignore partitions of broken tables + * created by for example camera firmware, but + * we limit them to the end of the disk to avoid + * creating invalid block devices + */ + printk(KERN_CONT "limited to end of disk\n"); + size = get_capacity(disk) - from; + } } part = add_partition(disk, p, from, size, state->parts[p].flags); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 6f841fb1be3..a2d7298be35 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1106,6 +1106,8 @@ struct block_device_operations { int (*direct_access) (struct block_device *, sector_t, void **, unsigned long *); int (*media_changed) (struct gendisk *); + unsigned long long (*set_capacity) (struct gendisk *, + unsigned long long); int (*revalidate_disk) (struct gendisk *); int (*getgeo)(struct block_device *, struct hd_geometry *); struct module *owner; diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 634c53028fb..239e24b081a 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -113,6 +113,7 @@ struct hd_struct { #define GENHD_FL_UP 16 #define GENHD_FL_SUPPRESS_PARTITION_INFO 32 #define GENHD_FL_EXT_DEVT 64 /* allow extended devt */ +#define GENHD_FL_NATIVE_CAPACITY 128 #define BLK_SCSI_MAX_CMDS (256) #define BLK_SCSI_CMD_PER_LONG (BLK_SCSI_MAX_CMDS / (sizeof(long) * 8)) -- cgit v1.2.3-70-g09d2 From e957b60d1583022a0f7c03267d37fcae2ddb78b1 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 7 Jun 2009 13:52:52 +0200 Subject: ide-gd: implement block device ->set_capacity method (v2) * Use ->probed_capacity to store native device capacity for ATA disks. * Add ->set_capacity method to struct ide_disk_ops. * Implement disk device ->set_capacity method for ATA disks. * Implement block device ->set_capacity method. v2: * Check if LBA and HPA are supported in ide_disk_set_capacity(). * According to the spec the SET MAX ADDRESS command shall be immediately preceded by a READ NATIVE MAX ADDRESS command. * Add ide_disk_hpa_{get_native,set}_capacity() helpers. Together with the previous patch adding ->set_capacity block device method this allows automatic disabling of Host Protected Area (HPA) if any partitions overlapping HPA are detected. Cc: Robert Hancock Cc: Frans Pop Cc: "Andries E. Brouwer" Cc: Al Viro Emphatically-Acked-by: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 67 +++++++++++++++++++++++++++++++++++++++++--------- drivers/ide/ide-gd.c | 14 +++++++++++ include/linux/ide.h | 4 +-- 3 files changed, 72 insertions(+), 13 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index a9fbe2c3121..61a6d354622 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -302,14 +302,12 @@ static const struct drive_list_entry hpa_list[] = { { NULL, NULL } }; -static void idedisk_check_hpa(ide_drive_t *drive) +static u64 ide_disk_hpa_get_native_capacity(ide_drive_t *drive, int lba48) { - unsigned long long capacity, set_max; - int lba48 = ata_id_lba48_enabled(drive->id); + u64 capacity, set_max; capacity = drive->capacity64; - - set_max = idedisk_read_native_max_address(drive, lba48); + set_max = idedisk_read_native_max_address(drive, lba48); if (ide_in_drive_list(drive->id, hpa_list)) { /* @@ -320,9 +318,31 @@ static void idedisk_check_hpa(ide_drive_t *drive) set_max--; } + return set_max; +} + +static u64 ide_disk_hpa_set_capacity(ide_drive_t *drive, u64 set_max, int lba48) +{ + set_max = idedisk_set_max_address(drive, set_max, lba48); + if (set_max) + drive->capacity64 = set_max; + + return set_max; +} + +static void idedisk_check_hpa(ide_drive_t *drive) +{ + u64 capacity, set_max; + int lba48 = ata_id_lba48_enabled(drive->id); + + capacity = drive->capacity64; + set_max = ide_disk_hpa_get_native_capacity(drive, lba48); + if (set_max <= capacity) return; + drive->probed_capacity = set_max; + printk(KERN_INFO "%s: Host Protected Area detected.\n" "\tcurrent capacity is %llu sectors (%llu MB)\n" "\tnative capacity is %llu sectors (%llu MB)\n", @@ -330,13 +350,10 @@ static void idedisk_check_hpa(ide_drive_t *drive) capacity, sectors_to_MB(capacity), set_max, sectors_to_MB(set_max)); - set_max = idedisk_set_max_address(drive, set_max, lba48); - - if (set_max) { - drive->capacity64 = set_max; + set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48); + if (set_max) printk(KERN_INFO "%s: Host Protected Area disabled.\n", drive->name); - } } static int ide_disk_get_capacity(ide_drive_t *drive) @@ -358,6 +375,8 @@ static int ide_disk_get_capacity(ide_drive_t *drive) drive->capacity64 = drive->cyl * drive->head * drive->sect; } + drive->probed_capacity = drive->capacity64; + if (lba) { drive->dev_flags |= IDE_DFLAG_LBA; @@ -376,7 +395,7 @@ static int ide_disk_get_capacity(ide_drive_t *drive) "%llu sectors (%llu MB)\n", drive->name, (unsigned long long)drive->capacity64, sectors_to_MB(drive->capacity64)); - drive->capacity64 = 1ULL << 28; + drive->probed_capacity = drive->capacity64 = 1ULL << 28; } if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && @@ -392,6 +411,31 @@ static int ide_disk_get_capacity(ide_drive_t *drive) return 0; } +static u64 ide_disk_set_capacity(ide_drive_t *drive, u64 capacity) +{ + u64 set = min(capacity, drive->probed_capacity); + u16 *id = drive->id; + int lba48 = ata_id_lba48_enabled(id); + + if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 || + ata_id_hpa_enabled(id) == 0) + goto out; + + /* + * according to the spec the SET MAX ADDRESS command shall be + * immediately preceded by a READ NATIVE MAX ADDRESS command + */ + capacity = ide_disk_hpa_get_native_capacity(drive, lba48); + if (capacity == 0) + goto out; + + set = ide_disk_hpa_set_capacity(drive, set, lba48); + if (set) + return set; +out: + return drive->capacity64; +} + static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) { ide_drive_t *drive = q->queuedata; @@ -741,6 +785,7 @@ static int ide_disk_set_doorlock(ide_drive_t *drive, struct gendisk *disk, const struct ide_disk_ops ide_ata_disk_ops = { .check = ide_disk_check, + .set_capacity = ide_disk_set_capacity, .get_capacity = ide_disk_get_capacity, .setup = ide_disk_setup, .flush = ide_disk_flush, diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c index 4b6b71e2cdf..214119026b3 100644 --- a/drivers/ide/ide-gd.c +++ b/drivers/ide/ide-gd.c @@ -287,6 +287,19 @@ static int ide_gd_media_changed(struct gendisk *disk) return ret; } +static unsigned long long ide_gd_set_capacity(struct gendisk *disk, + unsigned long long capacity) +{ + struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); + ide_drive_t *drive = idkp->drive; + const struct ide_disk_ops *disk_ops = drive->disk_ops; + + if (disk_ops->set_capacity) + return disk_ops->set_capacity(drive, capacity); + + return drive->capacity64; +} + static int ide_gd_revalidate_disk(struct gendisk *disk) { struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj); @@ -315,6 +328,7 @@ static struct block_device_operations ide_gd_ops = { .locked_ioctl = ide_gd_ioctl, .getgeo = ide_gd_getgeo, .media_changed = ide_gd_media_changed, + .set_capacity = ide_gd_set_capacity, .revalidate_disk = ide_gd_revalidate_disk }; diff --git a/include/linux/ide.h b/include/linux/ide.h index 9fed365a598..e96ace12872 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -397,6 +397,7 @@ struct ide_drive_s; struct ide_disk_ops { int (*check)(struct ide_drive_s *, const char *); int (*get_capacity)(struct ide_drive_s *); + u64 (*set_capacity)(struct ide_drive_s *, u64); void (*setup)(struct ide_drive_s *); void (*flush)(struct ide_drive_s *); int (*init_media)(struct ide_drive_s *, struct gendisk *); @@ -568,8 +569,7 @@ struct ide_drive_s { unsigned int drive_data; /* used by set_pio_mode/dev_select() */ unsigned int failures; /* current failure count */ unsigned int max_failures; /* maximum allowed failure count */ - u64 probed_capacity;/* initial reported media capacity (ide-cd only currently) */ - + u64 probed_capacity;/* initial/native media capacity */ u64 capacity64; /* total number of sectors */ int lun; /* logical unit */ -- cgit v1.2.3-70-g09d2 From 075affcbe01d4d7cefcd0e30a98df1253bcf8d92 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 7 Jun 2009 13:52:52 +0200 Subject: ide: preserve Host Protected Area by default (v2) From the perspective of most users of recent systems, disabling Host Protected Area (HPA) can break vendor RAID formats, GPT partitions and risks corrupting firmware or overwriting vendor system recovery tools. Unfortunately the original (kernels < 2.6.30) behavior (unconditionally disabling HPA and using full disk capacity) was introduced at the time when the main use of HPA was to make the drive look small enough for the BIOS to allow the system to boot with large capacity drives. Thus to allow the maximum compatibility with the existing setups (using HPA and partitioned with HPA disabled) we automically disable HPA if any partitions overlapping HPA are detected. Additionally HPA can also be disabled using the "nohpa" module parameter (i.e. "ide_core.nohpa=0.0" to disable HPA on /dev/hda). v2: Fix ->resume HPA support. While at it: - remove stale "idebus=" entry from Documentation/kernel-parameters.txt Cc: Robert Hancock Cc: Frans Pop Cc: "Andries E. Brouwer" Cc: Al Viro Acked-by: Sergei Shtylyov [patch description was based on input from Alan Cox and Frans Pop] Emphatically-Acked-by: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/ide/ide.txt | 2 ++ Documentation/kernel-parameters.txt | 7 ++----- drivers/ide/ide-disk.c | 8 +++++++- drivers/ide/ide.c | 10 ++++++++++ include/linux/ide.h | 2 ++ 5 files changed, 23 insertions(+), 6 deletions(-) diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt index 0c78f4b1d9d..e77bebfa7b0 100644 --- a/Documentation/ide/ide.txt +++ b/Documentation/ide/ide.txt @@ -216,6 +216,8 @@ Other kernel parameters for ide_core are: * "noflush=[interface_number.device_number]" to disable flush requests +* "nohpa=[interface_number.device_number]" to disable Host Protected Area + * "noprobe=[interface_number.device_number]" to skip probing * "nowerr=[interface_number.device_number]" to ignore the WRERR_STAT bit diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a19f021f081..e58c91ca802 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -835,11 +835,8 @@ and is between 256 and 4096 characters. It is defined in the file ide-core.nodma= [HW] (E)IDE subsystem Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc - .vlb_clock .pci_clock .noflush .noprobe .nowerr .cdrom - .chs .ignore_cable are additional options - See Documentation/ide/ide.txt. - - idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed + .vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr + .cdrom .chs .ignore_cable are additional options See Documentation/ide/ide.txt. ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 61a6d354622..3d92c9d54d4 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -350,6 +350,9 @@ static void idedisk_check_hpa(ide_drive_t *drive) capacity, sectors_to_MB(capacity), set_max, sectors_to_MB(set_max)); + if ((drive->dev_flags & IDE_DFLAG_NOHPA) == 0) + return; + set_max = ide_disk_hpa_set_capacity(drive, set_max, lba48); if (set_max) printk(KERN_INFO "%s: Host Protected Area disabled.\n", @@ -430,8 +433,11 @@ static u64 ide_disk_set_capacity(ide_drive_t *drive, u64 capacity) goto out; set = ide_disk_hpa_set_capacity(drive, set, lba48); - if (set) + if (set) { + /* needed for ->resume to disable HPA */ + drive->dev_flags |= IDE_DFLAG_NOHPA; return set; + } out: return drive->capacity64; } diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 92c9b90931e..16d056939f9 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -211,6 +211,11 @@ static unsigned int ide_noflush; module_param_call(noflush, ide_set_dev_param_mask, NULL, &ide_noflush, 0); MODULE_PARM_DESC(noflush, "disable flush requests for a device"); +static unsigned int ide_nohpa; + +module_param_call(nohpa, ide_set_dev_param_mask, NULL, &ide_nohpa, 0); +MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device"); + static unsigned int ide_noprobe; module_param_call(noprobe, ide_set_dev_param_mask, NULL, &ide_noprobe, 0); @@ -281,6 +286,11 @@ static void ide_dev_apply_params(ide_drive_t *drive, u8 unit) drive->name); drive->dev_flags |= IDE_DFLAG_NOFLUSH; } + if (ide_nohpa & (1 << i)) { + printk(KERN_INFO "ide: disabling Host Protected Area for %s\n", + drive->name); + drive->dev_flags |= IDE_DFLAG_NOHPA; + } if (ide_noprobe & (1 << i)) { printk(KERN_INFO "ide: skipping probe for %s\n", drive->name); drive->dev_flags |= IDE_DFLAG_NOPROBE; diff --git a/include/linux/ide.h b/include/linux/ide.h index e96ace12872..45dce3b4c88 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -475,6 +475,8 @@ enum { IDE_DFLAG_NICE1 = (1 << 5), /* device is physically present */ IDE_DFLAG_PRESENT = (1 << 6), + /* disable Host Protected Area */ + IDE_DFLAG_NOHPA = (1 << 7), /* id read from device (synthetic if not set) */ IDE_DFLAG_ID_READ = (1 << 8), IDE_DFLAG_NOPROBE = (1 << 9), -- cgit v1.2.3-70-g09d2