From 6410db593e8c1b2b79a2f18554310d6da9415584 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 28 Feb 2011 23:36:09 -0600 Subject: rtl8187: Change rate-control feedback The driver for the RTL8187L chips returns IEEE80211_TX_STAT_ACK for all packets, even if the maximum number of retries was exhausted. In addition it fails to setup max_rates in the ieee80211_hw struct, This behavior may be responsible for the problems noted in Bug 14168. As the bug is very old, testers have not been found, and I do not have the case where the indicated signal is less than -70 dBm. Signed-off-by: Larry Finger Acked-by: Hin-Tak Leung Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187/dev.c | 25 ++++++++++++++++++++----- drivers/net/wireless/rtl818x/rtl8187/rtl8187.h | 2 ++ 2 files changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c index c5a5e788f25..1e0be14d10d 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c @@ -869,23 +869,35 @@ static void rtl8187_work(struct work_struct *work) /* The RTL8187 returns the retry count through register 0xFFFA. In * addition, it appears to be a cumulative retry count, not the * value for the current TX packet. When multiple TX entries are - * queued, the retry count will be valid for the last one in the queue. - * The "error" should not matter for purposes of rate setting. */ + * waiting in the queue, the retry count will be the total for all. + * The "error" may matter for purposes of rate setting, but there is + * no other choice with this hardware. + */ struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv, work.work); struct ieee80211_tx_info *info; struct ieee80211_hw *dev = priv->dev; static u16 retry; u16 tmp; + u16 avg_retry; + int length; mutex_lock(&priv->conf_mutex); tmp = rtl818x_ioread16(priv, (__le16 *)0xFFFA); + length = skb_queue_len(&priv->b_tx_status.queue); + if (unlikely(!length)) + length = 1; + if (unlikely(tmp < retry)) + tmp = retry; + avg_retry = (tmp - retry) / length; while (skb_queue_len(&priv->b_tx_status.queue) > 0) { struct sk_buff *old_skb; old_skb = skb_dequeue(&priv->b_tx_status.queue); info = IEEE80211_SKB_CB(old_skb); - info->status.rates[0].count = tmp - retry + 1; + info->status.rates[0].count = avg_retry + 1; + if (info->status.rates[0].count > RETRY_COUNT) + info->flags &= ~IEEE80211_TX_STAT_ACK; ieee80211_tx_status_irqsafe(dev, old_skb); } retry = tmp; @@ -931,8 +943,8 @@ static int rtl8187_start(struct ieee80211_hw *dev) rtl818x_iowrite32(priv, &priv->map->TX_CONF, RTL818X_TX_CONF_HW_SEQNUM | RTL818X_TX_CONF_DISREQQSIZE | - (7 << 8 /* short retry limit */) | - (7 << 0 /* long retry limit */) | + (RETRY_COUNT << 8 /* short retry limit */) | + (RETRY_COUNT << 0 /* long retry limit */) | (7 << 21 /* MAX TX DMA */)); rtl8187_init_urbs(dev); rtl8187b_init_status_urb(dev); @@ -1376,6 +1388,9 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_RX_INCLUDES_FCS; + /* Initialize rate-control variables */ + dev->max_rates = 1; + dev->max_rate_tries = RETRY_COUNT; eeprom.data = dev; eeprom.register_read = rtl8187_eeprom_register_read; diff --git a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h index 0d7b1423f77..f1cc90751db 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h +++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h @@ -35,6 +35,8 @@ #define RFKILL_MASK_8187_89_97 0x2 #define RFKILL_MASK_8198 0x4 +#define RETRY_COUNT 7 + struct rtl8187_rx_info { struct urb *urb; struct ieee80211_hw *dev; -- cgit v1.2.3-70-g09d2