From 5a8fba524c2063cb297bdbacda535448ee365dc4 Mon Sep 17 00:00:00 2001 From: Chris Ball Date: Wed, 16 Mar 2011 17:46:45 -0400 Subject: mmc: mmc_test: Remove set-but-unused variable. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes: drivers/mmc/card/mmc_test.c: In function ‘mmc_test_seq_perf’: drivers/mmc/card/mmc_test.c:1878:28: warning: variable ‘ts’ set but not used [-Wunused-but-set-variable] There's no reason to be calling timespec_sub() here, because mmc_test_print_avg_rate() is going to do that itself. Signed-off-by: Chris Ball Cc: Adrian Hunter --- drivers/mmc/card/mmc_test.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index 5ec8eddfcf6..f5cedeccad4 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -1875,7 +1875,7 @@ static int mmc_test_seq_perf(struct mmc_test_card *test, int write, unsigned int tot_sz, int max_scatter) { unsigned int dev_addr, i, cnt, sz, ssz; - struct timespec ts1, ts2, ts; + struct timespec ts1, ts2; int ret; sz = test->area.max_tfr; @@ -1912,7 +1912,6 @@ static int mmc_test_seq_perf(struct mmc_test_card *test, int write, } getnstimeofday(&ts2); - ts = timespec_sub(ts2, ts1); mmc_test_print_avg_rate(test, sz, cnt, &ts1, &ts2); return 0; -- cgit v1.2.3-70-g09d2 From cf5e23e1c27af4291cf90020c295756ba4dcf326 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 17 Mar 2011 16:46:17 -0400 Subject: mmc: use pci_dev->revision The SDHCI driver uses PCI_CLASS_REVISION instead of PCI_REVISION_ID, so it was not converted by commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65 (PCI: Change all drivers to use pci_device->revision). The newer VIA driver has similar code too. This patch converts both drivers to use the 'revision' field of 'struct pci_dev'. Signed-off-by: Sergei Shtylyov Acked-by: Harald Welte Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-pci.c | 6 ++---- drivers/mmc/host/via-sdmmc.c | 5 ++--- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 2f8d46854ac..a136be70634 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -1016,16 +1016,14 @@ static int __devinit sdhci_pci_probe(struct pci_dev *pdev, struct sdhci_pci_chip *chip; struct sdhci_pci_slot *slot; - u8 slots, rev, first_bar; + u8 slots, first_bar; int ret, i; BUG_ON(pdev == NULL); BUG_ON(ent == NULL); - pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev); - dev_info(&pdev->dev, "SDHCI controller found [%04x:%04x] (rev %x)\n", - (int)pdev->vendor, (int)pdev->device, (int)rev); + (int)pdev->vendor, (int)pdev->device, (int)pdev->revision); ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots); if (ret) diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c index 8c5b4881ccd..4dfe2c02ea9 100644 --- a/drivers/mmc/host/via-sdmmc.c +++ b/drivers/mmc/host/via-sdmmc.c @@ -1087,14 +1087,13 @@ static int __devinit via_sd_probe(struct pci_dev *pcidev, struct mmc_host *mmc; struct via_crdr_mmc_host *sdhost; u32 base, len; - u8 rev, gatt; + u8 gatt; int ret; - pci_read_config_byte(pcidev, PCI_CLASS_REVISION, &rev); pr_info(DRV_NAME ": VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n", pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device, - (int)rev); + (int)pcidev->revision); ret = pci_enable_device(pcidev); if (ret) -- cgit v1.2.3-70-g09d2 From a5289a433dd7b15df248d1f0272f52be38fe6971 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Fri, 25 Feb 2011 11:08:13 +0900 Subject: mmc: dw_mmc: set fixed burst in BMOD register This patch uses the fixed burst bit when using an internal DMA controller. I found increased performance with IDMAC when this bit is set. Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Signed-off-by: Chris Ball --- drivers/mmc/host/dw_mmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 5a614069cb0..87e1f57ec9b 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -316,7 +316,7 @@ static void dw_mci_idmac_stop_dma(struct dw_mci *host) /* Stop the IDMAC running */ temp = mci_readl(host, BMOD); - temp &= ~SDMMC_IDMAC_ENABLE; + temp &= ~(SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB); mci_writel(host, BMOD, temp); } @@ -385,7 +385,7 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len) /* Enable the IDMAC */ temp = mci_readl(host, BMOD); - temp |= SDMMC_IDMAC_ENABLE; + temp |= SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB; mci_writel(host, BMOD, temp); /* Start it running */ -- cgit v1.2.3-70-g09d2 From 768fbc1876b3239f4c463c00ea1e78725554cf21 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Fri, 11 Mar 2011 17:18:07 +0000 Subject: mmc: mmci: Add ARM variant with extended FIFO New IO FPGA implementation for Versatile Express boards contain MMCI (PL180) cell with FIFO extended to 128 words (512 bytes). Matt Waddel reports that this patch improves MMC performance on his vexpress system, and also fixes "mmcblk0: error -5 transferring data" errors. Signed-off-by: Pawel Moll Tested-by: Matt Waddel Signed-off-by: Chris Ball --- drivers/mmc/host/mmci.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 5bbb87d1025..b4a7e4fba90 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -68,6 +68,12 @@ static struct variant_data variant_arm = { .datalength_bits = 16, }; +static struct variant_data variant_arm_extended_fifo = { + .fifosize = 128 * 4, + .fifohalfsize = 64 * 4, + .datalength_bits = 16, +}; + static struct variant_data variant_u300 = { .fifosize = 16 * 4, .fifohalfsize = 8 * 4, @@ -1277,9 +1283,14 @@ static int mmci_resume(struct amba_device *dev) static struct amba_id mmci_ids[] = { { .id = 0x00041180, - .mask = 0x000fffff, + .mask = 0xff0fffff, .data = &variant_arm, }, + { + .id = 0x01041180, + .mask = 0xff0fffff, + .data = &variant_arm_extended_fifo, + }, { .id = 0x00041181, .mask = 0x000fffff, -- cgit v1.2.3-70-g09d2 From b2fce6ad9f0f01cc06745298148a4941ccc4d3ec Mon Sep 17 00:00:00 2001 From: David Miller Date: Fri, 18 Mar 2011 15:00:23 -0700 Subject: mmc: of_mmc_spi: Need to include irq.h and of_irq.h Since these are the headers that provide irq_of_parse_and_map() and NO_IRQ. Signed-off-by: David S. Miller Acked-by: Grant Likely Signed-off-by: Chris Ball --- drivers/mmc/host/of_mmc_spi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c index 5530def54e5..e2aecb7f1d5 100644 --- a/drivers/mmc/host/of_mmc_spi.c +++ b/drivers/mmc/host/of_mmc_spi.c @@ -15,9 +15,11 @@ #include #include #include +#include #include #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From e481e45df754cbb01630e308f9baeb1c066ef1f9 Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Mon, 21 Mar 2011 13:22:13 +0800 Subject: mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from esdhc sdhci-esdhc-imx does not need SDHCI_QUIRK_NO_CARD_NO_RESET. Make it OF-specific. Signed-off-by: Richard Zhu Tested-by: Wolfram Sang Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-esdhc.h | 3 +-- drivers/mmc/host/sdhci-of-esdhc.c | 3 ++- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h index c55aae828aa..c3b08f11194 100644 --- a/drivers/mmc/host/sdhci-esdhc.h +++ b/drivers/mmc/host/sdhci-esdhc.h @@ -23,8 +23,7 @@ SDHCI_QUIRK_NONSTANDARD_CLOCK | \ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | \ SDHCI_QUIRK_PIO_NEEDS_DELAY | \ - SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET | \ - SDHCI_QUIRK_NO_CARD_NO_RESET) + SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET) #define ESDHC_SYSTEM_CONTROL 0x2c #define ESDHC_CLOCK_MASK 0x0000fff0 diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 08161f690ae..ba40d6d035c 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -74,7 +74,8 @@ static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host) struct sdhci_of_data sdhci_esdhc = { /* card detection could be handled via GPIO */ - .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION, + .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION + | SDHCI_QUIRK_NO_CARD_NO_RESET, .ops = { .read_l = sdhci_be32bs_readl, .read_w = esdhc_readw, -- cgit v1.2.3-70-g09d2 From 574e3f5602d930a962f50dcc7124941c60c44084 Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Mon, 21 Mar 2011 13:22:14 +0800 Subject: mmc: sdhci: add the abort CMDTYPE bits definition Add the abort CMDTYPE bits definition of command register (offset 0xE) Signed-off-by: Richard Zhu Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 6e0969e4065..25e8bde600d 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -45,6 +45,7 @@ #define SDHCI_CMD_CRC 0x08 #define SDHCI_CMD_INDEX 0x10 #define SDHCI_CMD_DATA 0x20 +#define SDHCI_CMD_ABORTCMD 0xC0 #define SDHCI_CMD_RESP_NONE 0x00 #define SDHCI_CMD_RESP_LONG 0x01 -- cgit v1.2.3-70-g09d2 From e149860d16d96aef1a8eb7dc1d0b9d4313479e61 Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Fri, 25 Mar 2011 09:18:27 -0400 Subject: mmc: sdhci-esdhc: use writel/readl as general APIs Add one flag to indicate the GPIO CD/WP is enabled or not on imx platforms, and reuse the writel/readl as the general APIs for imx SOCs. Signed-off-by: Richard Zhu Reviewed-by: Wolfram Sang Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-esdhc-imx.c | 44 ++++++++++++++++++++++++++++++++------ drivers/mmc/host/sdhci-pltfm.h | 2 +- 2 files changed, 38 insertions(+), 8 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 3b524856797..67a2da961bb 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -24,6 +25,13 @@ #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" +#define ESDHC_FLAG_GPIO_FOR_CD_WP (1 << 0) + +struct pltfm_imx_data { + int flags; + u32 scratchpad; +}; + static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, int reg) { void __iomem *base = host->ioaddr + (reg & ~0x3); @@ -34,10 +42,14 @@ static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, i static u32 esdhc_readl_le(struct sdhci_host *host, int reg) { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + /* fake CARD_PRESENT flag on mx25/35 */ u32 val = readl(host->ioaddr + reg); - if (unlikely(reg == SDHCI_PRESENT_STATE)) { + if (unlikely((reg == SDHCI_PRESENT_STATE) + && (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD_WP))) { struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data; @@ -55,7 +67,11 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg) { - if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; + + if (unlikely((reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE) + && (imx_data->flags & ESDHC_FLAG_GPIO_FOR_CD_WP))) /* * these interrupts won't work with a custom card_detect gpio * (only applied to mx25/35) @@ -76,6 +92,7 @@ static u16 esdhc_readw_le(struct sdhci_host *host, int reg) static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; switch (reg) { case SDHCI_TRANSFER_MODE: @@ -83,10 +100,10 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) * Postpone this write, we must do it together with a * command write that is down below. */ - pltfm_host->scratchpad = val; + imx_data->scratchpad = val; return; case SDHCI_COMMAND: - writel(val << 16 | pltfm_host->scratchpad, + writel(val << 16 | imx_data->scratchpad, host->ioaddr + SDHCI_TRANSFER_MODE); return; case SDHCI_BLOCK_SIZE: @@ -146,7 +163,9 @@ static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host) } static struct sdhci_ops sdhci_esdhc_ops = { + .read_l = esdhc_readl_le, .read_w = esdhc_readw_le, + .write_l = esdhc_writel_le, .write_w = esdhc_writew_le, .write_b = esdhc_writeb_le, .set_clock = esdhc_set_clock, @@ -168,6 +187,7 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data; struct clk *clk; int err; + struct pltfm_imx_data *imx_data; clk = clk_get(mmc_dev(host->mmc), NULL); if (IS_ERR(clk)) { @@ -177,7 +197,15 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd clk_enable(clk); pltfm_host->clk = clk; - if (cpu_is_mx35() || cpu_is_mx51()) + imx_data = kzalloc(sizeof(struct pltfm_imx_data), GFP_KERNEL); + if (!imx_data) { + clk_disable(pltfm_host->clk); + clk_put(pltfm_host->clk); + return -ENOMEM; + } + pltfm_host->priv = imx_data; + + if (!cpu_is_mx25()) host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; if (cpu_is_mx25() || cpu_is_mx35()) { @@ -214,8 +242,7 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd goto no_card_detect_irq; } - sdhci_esdhc_ops.write_l = esdhc_writel_le; - sdhci_esdhc_ops.read_l = esdhc_readl_le; + imx_data->flags |= ESDHC_FLAG_GPIO_FOR_CD_WP; /* Now we have a working card_detect again */ host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; } @@ -227,6 +254,7 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd no_card_detect_pin: boarddata->cd_gpio = err; not_supported: + kfree(imx_data); return 0; } @@ -234,6 +262,7 @@ static void esdhc_pltfm_exit(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct esdhc_platform_data *boarddata = host->mmc->parent->platform_data; + struct pltfm_imx_data *imx_data = pltfm_host->priv; if (boarddata && gpio_is_valid(boarddata->wp_gpio)) gpio_free(boarddata->wp_gpio); @@ -247,6 +276,7 @@ static void esdhc_pltfm_exit(struct sdhci_host *host) clk_disable(pltfm_host->clk); clk_put(pltfm_host->clk); + kfree(imx_data); } struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { diff --git a/drivers/mmc/host/sdhci-pltfm.h b/drivers/mmc/host/sdhci-pltfm.h index ea2e44d9be5..2b37016ad0a 100644 --- a/drivers/mmc/host/sdhci-pltfm.h +++ b/drivers/mmc/host/sdhci-pltfm.h @@ -17,7 +17,7 @@ struct sdhci_pltfm_host { struct clk *clk; - u32 scratchpad; /* to handle quirks across io-accessor calls */ + void *priv; /* to handle quirks across io-accessor calls */ }; extern struct sdhci_pltfm_data sdhci_cns3xxx_pdata; -- cgit v1.2.3-70-g09d2 From 58ac8177cebb890ba980cdace36457e0fe1e62af Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Mon, 21 Mar 2011 13:22:16 +0800 Subject: mmc: sdhci-esdhc: enable esdhc on imx53 Fix the NO INT in the Multi-BLK IO in SD/MMC, and Multi-BLK read in SDIO on imx53. The CMDTYPE of the CMD register (offset 0xE) should be set to "11" when the STOP CMD12 is issued on imx53 to abort one open ended multi-blk IO. Otherwise the TC INT wouldn't be generated. In exact block transfer, the controller doesn't complete the operations automatically as required at the end of the transfer and remains on hold if the abort command is not sent on imx53. As a result, the TC flag is not asserted and SW receives timeout exception. Set bit1 of Vendor Spec register to fix it. Signed-off-by: Richard Zhu Signed-off-by: Richard Zhao Reviewed-by: Wolfram Sang Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-esdhc-imx.c | 42 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 67a2da961bb..a19967d0bfc 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -19,13 +19,31 @@ #include #include #include +#include +#include #include #include #include "sdhci.h" #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" +/* VENDOR SPEC register */ +#define SDHCI_VENDOR_SPEC 0xC0 +#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002 + #define ESDHC_FLAG_GPIO_FOR_CD_WP (1 << 0) +/* + * The CMDTYPE of the CMD register (offset 0xE) should be set to + * "11" when the STOP CMD12 is issued on imx53 to abort one + * open ended multi-blk IO. Otherwise the TC INT wouldn't + * be generated. + * In exact block transfer, the controller doesn't complete the + * operations automatically as required at the end of the + * transfer and remains on hold if the abort command is not sent. + * As a result, the TC flag is not asserted and SW received timeout + * exeception. Bit1 of Vendor Spec registor is used to fix it. + */ +#define ESDHC_FLAG_MULTIBLK_NO_INT (1 << 1) struct pltfm_imx_data { int flags; @@ -78,6 +96,15 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg) */ val &= ~(SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT); + if (unlikely((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT) + && (reg == SDHCI_INT_STATUS) + && (val & SDHCI_INT_DATA_END))) { + u32 v; + v = readl(host->ioaddr + SDHCI_VENDOR_SPEC); + v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK; + writel(v, host->ioaddr + SDHCI_VENDOR_SPEC); + } + writel(val, host->ioaddr + reg); } @@ -100,9 +127,21 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) * Postpone this write, we must do it together with a * command write that is down below. */ + if ((imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT) + && (host->cmd->opcode == SD_IO_RW_EXTENDED) + && (host->cmd->data->blocks > 1) + && (host->cmd->data->flags & MMC_DATA_READ)) { + u32 v; + v = readl(host->ioaddr + SDHCI_VENDOR_SPEC); + v |= SDHCI_VENDOR_SPEC_SDIO_QUIRK; + writel(v, host->ioaddr + SDHCI_VENDOR_SPEC); + } imx_data->scratchpad = val; return; case SDHCI_COMMAND: + if ((host->cmd->opcode == MMC_STOP_TRANSMISSION) + && (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) + val |= SDHCI_CMD_ABORTCMD; writel(val << 16 | imx_data->scratchpad, host->ioaddr + SDHCI_TRANSFER_MODE); return; @@ -215,6 +254,9 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd sdhci_esdhc_ops.get_ro = esdhc_pltfm_get_ro; } + if (!(cpu_is_mx25() || cpu_is_mx35() || cpu_is_mx51())) + imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT; + if (boarddata) { err = gpio_request_one(boarddata->wp_gpio, GPIOF_IN, "ESDHC_WP"); if (err) { -- cgit v1.2.3-70-g09d2 From 4f665cb614b8a258b507cc47753dd3f7dd45aac6 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 25 Mar 2011 15:06:19 +0900 Subject: mmc: fix mmc_app_send_scr() for dma transfer This patch is based on the commit "af51715079e7fb6b290e1881d63d815dc4de5011": * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. The driver may invalidate the mmc_card->csd when host driver uses dma. So this subroutine also needs a kmalloc buffer. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Chris Ball --- drivers/mmc/core/sd_ops.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c index 797cdb5887f..76af349c14b 100644 --- a/drivers/mmc/core/sd_ops.c +++ b/drivers/mmc/core/sd_ops.c @@ -9,6 +9,7 @@ * your option) any later version. */ +#include #include #include @@ -252,6 +253,7 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr) struct mmc_command cmd; struct mmc_data data; struct scatterlist sg; + void *data_buf; BUG_ON(!card); BUG_ON(!card->host); @@ -263,6 +265,13 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr) if (err) return err; + /* dma onto stack is unsafe/nonportable, but callers to this + * routine normally provide temporary on-stack buffers ... + */ + data_buf = kmalloc(sizeof(card->raw_scr), GFP_KERNEL); + if (data_buf == NULL) + return -ENOMEM; + memset(&mrq, 0, sizeof(struct mmc_request)); memset(&cmd, 0, sizeof(struct mmc_command)); memset(&data, 0, sizeof(struct mmc_data)); @@ -280,12 +289,15 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr) data.sg = &sg; data.sg_len = 1; - sg_init_one(&sg, scr, 8); + sg_init_one(&sg, data_buf, 8); mmc_set_data_timeout(&data, card); mmc_wait_for_req(card->host, &mrq); + memcpy(scr, data_buf, sizeof(card->raw_scr)); + kfree(data_buf); + if (cmd.error) return cmd.error; if (data.error) -- cgit v1.2.3-70-g09d2 From 51fc7b2ce74d31b7d9a6bd3c57bf6c1cc77e837d Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 4 Mar 2011 09:56:21 +0100 Subject: mmc: tmio-mmc: Improve DMA stability on sh-mobile On some SDHI tmio implementations the order of DMA and command completion interrupts swaps, which leads to malfunction. This patch postpones DMA activation until the MMC command completion IRQ time. Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc.c | 63 ++++++++++++++++++++++++--------------------- 1 file changed, 34 insertions(+), 29 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index ab1adeabdd2..e88627b3337 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -485,7 +485,10 @@ static void tmio_mmc_pio_irq(struct tmio_mmc_host *host) unsigned int count; unsigned long flags; - if (!data) { + if (host->chan_tx || host->chan_rx) { + pr_err("PIO IRQ in DMA mode!\n"); + return; + } else if (!data) { pr_debug("Spurious PIO IRQ\n"); return; } @@ -648,6 +651,8 @@ static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, if (host->data->flags & MMC_DATA_READ) { if (!host->chan_rx) enable_mmc_irqs(host, TMIO_MASK_READOP); + else + tasklet_schedule(&host->dma_issue); } else { if (!host->chan_tx) enable_mmc_irqs(host, TMIO_MASK_WRITEOP); @@ -779,18 +784,6 @@ static void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable) #endif } -static void tmio_dma_complete(void *arg) -{ - struct tmio_mmc_host *host = arg; - - dev_dbg(&host->pdev->dev, "Command completed\n"); - - if (!host->data) - dev_warn(&host->pdev->dev, "NULL data in DMA completion!\n"); - else - enable_mmc_irqs(host, TMIO_STAT_DATAEND); -} - static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) { struct scatterlist *sg = host->sg_ptr, *sg_tmp; @@ -817,6 +810,8 @@ static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) goto pio; } + disable_mmc_irqs(host, TMIO_STAT_RXRDY); + /* The only sg element can be unaligned, use our bounce buffer then */ if (!aligned) { sg_init_one(&host->bounce_sg, host->bounce_buf, sg->length); @@ -827,14 +822,11 @@ static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_FROM_DEVICE); if (ret > 0) desc = chan->device->device_prep_slave_sg(chan, sg, ret, - DMA_FROM_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + DMA_FROM_DEVICE, DMA_CTRL_ACK); - if (desc) { - desc->callback = tmio_dma_complete; - desc->callback_param = host; + if (desc) cookie = dmaengine_submit(desc); - dma_async_issue_pending(chan); - } + dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", __func__, host->sg_len, ret, cookie, host->mrq); @@ -886,6 +878,8 @@ static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) goto pio; } + disable_mmc_irqs(host, TMIO_STAT_TXRQ); + /* The only sg element can be unaligned, use our bounce buffer then */ if (!aligned) { unsigned long flags; @@ -900,13 +894,11 @@ static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_TO_DEVICE); if (ret > 0) desc = chan->device->device_prep_slave_sg(chan, sg, ret, - DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + DMA_TO_DEVICE, DMA_CTRL_ACK); - if (desc) { - desc->callback = tmio_dma_complete; - desc->callback_param = host; + if (desc) cookie = dmaengine_submit(desc); - } + dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", __func__, host->sg_len, ret, cookie, host->mrq); @@ -947,17 +939,30 @@ static void tmio_mmc_start_dma(struct tmio_mmc_host *host, static void tmio_issue_tasklet_fn(unsigned long priv) { struct tmio_mmc_host *host = (struct tmio_mmc_host *)priv; - struct dma_chan *chan = host->chan_tx; + struct dma_chan *chan = NULL; + + spin_lock_irq(&host->lock); + + if (host && host->data) { + if (host->data->flags & MMC_DATA_READ) + chan = host->chan_rx; + else + chan = host->chan_tx; + } + + spin_unlock_irq(&host->lock); - dma_async_issue_pending(chan); + enable_mmc_irqs(host, TMIO_STAT_DATAEND); + + if (chan) + dma_async_issue_pending(chan); } static void tmio_tasklet_fn(unsigned long arg) { struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg; - unsigned long flags; - spin_lock_irqsave(&host->lock, flags); + spin_lock_irq(&host->lock); if (!host->data) goto out; @@ -973,7 +978,7 @@ static void tmio_tasklet_fn(unsigned long arg) tmio_mmc_do_data_irq(host); out: - spin_unlock_irqrestore(&host->lock, flags); + spin_unlock_irq(&host->lock); } /* It might be necessary to make filter MFD specific */ -- cgit v1.2.3-70-g09d2 From 5f52c3552946eafa13f89c949449d16ce2b58b24 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 7 Mar 2011 11:33:11 +0100 Subject: mmc: tmio: use PIO for short transfers This patch allows transferring of some requests in PIO and some in DMA mode and defaults to using DMA only for transfers longer than 8 bytes. This is especially useful with SDIO, which can have lots of 2- and 4-byte transfers, creating unnecessary high overhead, when executed in DMA. Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc.c | 33 +++++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 10 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index e88627b3337..32ab1452d97 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -100,6 +100,8 @@ TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) #define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD) +#define TMIO_MIN_DMA_LEN 8 + #define enable_mmc_irqs(host, i) \ do { \ u32 mask;\ @@ -147,6 +149,7 @@ struct tmio_mmc_host { struct platform_device *pdev; /* DMA support */ + bool force_pio; struct dma_chan *chan_rx; struct dma_chan *chan_tx; struct tasklet_struct dma_complete; @@ -385,6 +388,7 @@ static void tmio_mmc_reset_work(struct work_struct *work) host->cmd = NULL; host->data = NULL; host->mrq = NULL; + host->force_pio = false; spin_unlock_irqrestore(&host->lock, flags); @@ -404,6 +408,7 @@ tmio_mmc_finish_request(struct tmio_mmc_host *host) host->mrq = NULL; host->cmd = NULL; host->data = NULL; + host->force_pio = false; cancel_delayed_work(&host->delayed_reset_work); @@ -485,7 +490,7 @@ static void tmio_mmc_pio_irq(struct tmio_mmc_host *host) unsigned int count; unsigned long flags; - if (host->chan_tx || host->chan_rx) { + if ((host->chan_tx || host->chan_rx) && !host->force_pio) { pr_err("PIO IRQ in DMA mode!\n"); return; } else if (!data) { @@ -551,15 +556,11 @@ static void tmio_mmc_do_data_irq(struct tmio_mmc_host *host) */ if (data->flags & MMC_DATA_READ) { - if (!host->chan_rx) - disable_mmc_irqs(host, TMIO_MASK_READOP); - else + if (host->chan_rx && !host->force_pio) tmio_check_bounce_buffer(host); dev_dbg(&host->pdev->dev, "Complete Rx request %p\n", host->mrq); } else { - if (!host->chan_tx) - disable_mmc_irqs(host, TMIO_MASK_WRITEOP); dev_dbg(&host->pdev->dev, "Complete Tx request %p\n", host->mrq); } @@ -583,7 +584,7 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host) if (!data) goto out; - if (host->chan_tx && (data->flags & MMC_DATA_WRITE)) { + if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) { /* * Has all data been written out yet? Testing on SuperH showed, * that in most cases the first interrupt comes already with the @@ -596,11 +597,12 @@ static void tmio_mmc_data_irq(struct tmio_mmc_host *host) disable_mmc_irqs(host, TMIO_STAT_DATAEND); tasklet_schedule(&host->dma_complete); } - } else if (host->chan_rx && (data->flags & MMC_DATA_READ)) { + } else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) { disable_mmc_irqs(host, TMIO_STAT_DATAEND); tasklet_schedule(&host->dma_complete); } else { tmio_mmc_do_data_irq(host); + disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP); } out: spin_unlock(&host->lock); @@ -649,12 +651,12 @@ static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, */ if (host->data && !cmd->error) { if (host->data->flags & MMC_DATA_READ) { - if (!host->chan_rx) + if (host->force_pio || !host->chan_rx) enable_mmc_irqs(host, TMIO_MASK_READOP); else tasklet_schedule(&host->dma_issue); } else { - if (!host->chan_tx) + if (host->force_pio || !host->chan_tx) enable_mmc_irqs(host, TMIO_MASK_WRITEOP); else tasklet_schedule(&host->dma_issue); @@ -810,6 +812,11 @@ static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) goto pio; } + if (sg->length < TMIO_MIN_DMA_LEN) { + host->force_pio = true; + return; + } + disable_mmc_irqs(host, TMIO_STAT_RXRDY); /* The only sg element can be unaligned, use our bounce buffer then */ @@ -878,6 +885,11 @@ static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) goto pio; } + if (sg->length < TMIO_MIN_DMA_LEN) { + host->force_pio = true; + return; + } + disable_mmc_irqs(host, TMIO_STAT_TXRQ); /* The only sg element can be unaligned, use our bounce buffer then */ @@ -1119,6 +1131,7 @@ static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) fail: host->mrq = NULL; + host->force_pio = false; mrq->cmd->error = ret; mmc_request_done(mmc, mrq); } -- cgit v1.2.3-70-g09d2 From b6147490e6aac82fa2f4b9d7fce925d9891ebe8f Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 23 Mar 2011 12:42:44 +0100 Subject: mmc: tmio: split core functionality, DMA and MFD glue TMIO MMC chips contain an SD / SDIO IP core from Panasonic, similar to the one, used in MN5774 and other MN57xx controllers. These IP cores are included in many multifunction devices, in sh-mobile chips from Renesas, in the latter case they can also use DMA. Some sh-mobile implementations also have some other specialities, that MFD-based solutions don't have. This makes supporting all these features in a monolithic driver inconveniet and error-prone. This patch splits the driver into 3 parts: the core, the MFD glue and the DMA support. In case of a modular build, two modules will be built: mmc_tmio_core and mmc_tmio. Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Chris Ball --- drivers/mmc/host/Kconfig | 4 + drivers/mmc/host/Makefile | 3 + drivers/mmc/host/tmio_mmc.c | 1303 +-------------------------------------- drivers/mmc/host/tmio_mmc.h | 145 +++++ drivers/mmc/host/tmio_mmc_dma.c | 316 ++++++++++ drivers/mmc/host/tmio_mmc_pio.c | 923 +++++++++++++++++++++++++++ 6 files changed, 1409 insertions(+), 1285 deletions(-) create mode 100644 drivers/mmc/host/tmio_mmc.h create mode 100644 drivers/mmc/host/tmio_mmc_dma.c create mode 100644 drivers/mmc/host/tmio_mmc_pio.c diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 1a21c6427a1..4d16166386c 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -439,9 +439,13 @@ config MMC_SDRICOH_CS To compile this driver as a module, choose M here: the module will be called sdricoh_cs. +config MMC_TMIO_CORE + tristate + config MMC_TMIO tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support" depends on MFD_TMIO || MFD_ASIC3 || MFD_SH_MOBILE_SDHI + select MMC_TMIO_CORE help This provides support for the SD/MMC cell found in TC6393XB, T7L66XB and also HTC ASIC3 diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 30aa6867745..79c42dd23c0 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -29,6 +29,9 @@ endif obj-$(CONFIG_MMC_S3C) += s3cmci.o obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o +obj-$(CONFIG_MMC_TMIO_CORE) += tmio_mmc_core.o +tmio_mmc_core-y := tmio_mmc_pio.o +tmio_mmc_core-$(CONFIG_TMIO_MMC_DMA) += tmio_mmc_dma.o obj-$(CONFIG_MMC_CB710) += cb710-mmc.o obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index 32ab1452d97..79c568461d5 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -1,8 +1,8 @@ /* - * linux/drivers/mmc/tmio_mmc.c + * linux/drivers/mmc/host/tmio_mmc.c * - * Copyright (C) 2004 Ian Molton - * Copyright (C) 2007 Ian Molton + * Copyright (C) 2007 Ian Molton + * Copyright (C) 2004 Ian Molton * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -11,1200 +11,17 @@ * Driver for the MMC / SD / SDIO cell found in: * * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3 - * - * This driver draws mainly on scattered spec sheets, Reverse engineering - * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit - * support). (Further 4 bit support from a later datasheet). - * - * TODO: - * Investigate using a workqueue for PIO transfers - * Eliminate FIXMEs - * SDIO support - * Better Power management - * Handle MMC errors better - * double buffer support - * */ -#include #include -#include -#include -#include -#include -#include #include #include #include #include #include #include -#include -#include - -#define CTL_SD_CMD 0x00 -#define CTL_ARG_REG 0x04 -#define CTL_STOP_INTERNAL_ACTION 0x08 -#define CTL_XFER_BLK_COUNT 0xa -#define CTL_RESPONSE 0x0c -#define CTL_STATUS 0x1c -#define CTL_IRQ_MASK 0x20 -#define CTL_SD_CARD_CLK_CTL 0x24 -#define CTL_SD_XFER_LEN 0x26 -#define CTL_SD_MEM_CARD_OPT 0x28 -#define CTL_SD_ERROR_DETAIL_STATUS 0x2c -#define CTL_SD_DATA_PORT 0x30 -#define CTL_TRANSACTION_CTL 0x34 -#define CTL_SDIO_STATUS 0x36 -#define CTL_SDIO_IRQ_MASK 0x38 -#define CTL_RESET_SD 0xe0 -#define CTL_SDIO_REGS 0x100 -#define CTL_CLK_AND_WAIT_CTL 0x138 -#define CTL_RESET_SDIO 0x1e0 - -/* Definitions for values the CTRL_STATUS register can take. */ -#define TMIO_STAT_CMDRESPEND 0x00000001 -#define TMIO_STAT_DATAEND 0x00000004 -#define TMIO_STAT_CARD_REMOVE 0x00000008 -#define TMIO_STAT_CARD_INSERT 0x00000010 -#define TMIO_STAT_SIGSTATE 0x00000020 -#define TMIO_STAT_WRPROTECT 0x00000080 -#define TMIO_STAT_CARD_REMOVE_A 0x00000100 -#define TMIO_STAT_CARD_INSERT_A 0x00000200 -#define TMIO_STAT_SIGSTATE_A 0x00000400 -#define TMIO_STAT_CMD_IDX_ERR 0x00010000 -#define TMIO_STAT_CRCFAIL 0x00020000 -#define TMIO_STAT_STOPBIT_ERR 0x00040000 -#define TMIO_STAT_DATATIMEOUT 0x00080000 -#define TMIO_STAT_RXOVERFLOW 0x00100000 -#define TMIO_STAT_TXUNDERRUN 0x00200000 -#define TMIO_STAT_CMDTIMEOUT 0x00400000 -#define TMIO_STAT_RXRDY 0x01000000 -#define TMIO_STAT_TXRQ 0x02000000 -#define TMIO_STAT_ILL_FUNC 0x20000000 -#define TMIO_STAT_CMD_BUSY 0x40000000 -#define TMIO_STAT_ILL_ACCESS 0x80000000 - -/* Definitions for values the CTRL_SDIO_STATUS register can take. */ -#define TMIO_SDIO_STAT_IOIRQ 0x0001 -#define TMIO_SDIO_STAT_EXPUB52 0x4000 -#define TMIO_SDIO_STAT_EXWT 0x8000 -#define TMIO_SDIO_MASK_ALL 0xc007 - -/* Define some IRQ masks */ -/* This is the mask used at reset by the chip */ -#define TMIO_MASK_ALL 0x837f031d -#define TMIO_MASK_READOP (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND) -#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND) -#define TMIO_MASK_CMD (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \ - TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) -#define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD) - -#define TMIO_MIN_DMA_LEN 8 - -#define enable_mmc_irqs(host, i) \ - do { \ - u32 mask;\ - mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \ - mask &= ~((i) & TMIO_MASK_IRQ); \ - sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \ - } while (0) - -#define disable_mmc_irqs(host, i) \ - do { \ - u32 mask;\ - mask = sd_ctrl_read32((host), CTL_IRQ_MASK); \ - mask |= ((i) & TMIO_MASK_IRQ); \ - sd_ctrl_write32((host), CTL_IRQ_MASK, mask); \ - } while (0) - -#define ack_mmc_irqs(host, i) \ - do { \ - sd_ctrl_write32((host), CTL_STATUS, ~(i)); \ - } while (0) - -/* This is arbitrary, just noone needed any higher alignment yet */ -#define MAX_ALIGN 4 - -struct tmio_mmc_host { - void __iomem *ctl; - unsigned long bus_shift; - struct mmc_command *cmd; - struct mmc_request *mrq; - struct mmc_data *data; - struct mmc_host *mmc; - int irq; - unsigned int sdio_irq_enabled; - - /* Callbacks for clock / power control */ - void (*set_pwr)(struct platform_device *host, int state); - void (*set_clk_div)(struct platform_device *host, int state); - - /* pio related stuff */ - struct scatterlist *sg_ptr; - struct scatterlist *sg_orig; - unsigned int sg_len; - unsigned int sg_off; - - struct platform_device *pdev; - - /* DMA support */ - bool force_pio; - struct dma_chan *chan_rx; - struct dma_chan *chan_tx; - struct tasklet_struct dma_complete; - struct tasklet_struct dma_issue; -#ifdef CONFIG_TMIO_MMC_DMA - u8 bounce_buf[PAGE_CACHE_SIZE] __attribute__((aligned(MAX_ALIGN))); - struct scatterlist bounce_sg; -#endif - - /* Track lost interrupts */ - struct delayed_work delayed_reset_work; - spinlock_t lock; - unsigned long last_req_ts; -}; - -static void tmio_check_bounce_buffer(struct tmio_mmc_host *host); - -static u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr) -{ - return readw(host->ctl + (addr << host->bus_shift)); -} - -static void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr, - u16 *buf, int count) -{ - readsw(host->ctl + (addr << host->bus_shift), buf, count); -} - -static u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr) -{ - return readw(host->ctl + (addr << host->bus_shift)) | - readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16; -} - -static void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val) -{ - writew(val, host->ctl + (addr << host->bus_shift)); -} - -static void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr, - u16 *buf, int count) -{ - writesw(host->ctl + (addr << host->bus_shift), buf, count); -} - -static void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val) -{ - writew(val, host->ctl + (addr << host->bus_shift)); - writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift)); -} - -static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data) -{ - host->sg_len = data->sg_len; - host->sg_ptr = data->sg; - host->sg_orig = data->sg; - host->sg_off = 0; -} - -static int tmio_mmc_next_sg(struct tmio_mmc_host *host) -{ - host->sg_ptr = sg_next(host->sg_ptr); - host->sg_off = 0; - return --host->sg_len; -} - -static char *tmio_mmc_kmap_atomic(struct scatterlist *sg, unsigned long *flags) -{ - local_irq_save(*flags); - return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; -} - -static void tmio_mmc_kunmap_atomic(struct scatterlist *sg, unsigned long *flags, void *virt) -{ - kunmap_atomic(virt - sg->offset, KM_BIO_SRC_IRQ); - local_irq_restore(*flags); -} - -#ifdef CONFIG_MMC_DEBUG - -#define STATUS_TO_TEXT(a, status, i) \ - do { \ - if (status & TMIO_STAT_##a) { \ - if (i++) \ - printk(" | "); \ - printk(#a); \ - } \ - } while (0) - -void pr_debug_status(u32 status) -{ - int i = 0; - printk(KERN_DEBUG "status: %08x = ", status); - STATUS_TO_TEXT(CARD_REMOVE, status, i); - STATUS_TO_TEXT(CARD_INSERT, status, i); - STATUS_TO_TEXT(SIGSTATE, status, i); - STATUS_TO_TEXT(WRPROTECT, status, i); - STATUS_TO_TEXT(CARD_REMOVE_A, status, i); - STATUS_TO_TEXT(CARD_INSERT_A, status, i); - STATUS_TO_TEXT(SIGSTATE_A, status, i); - STATUS_TO_TEXT(CMD_IDX_ERR, status, i); - STATUS_TO_TEXT(STOPBIT_ERR, status, i); - STATUS_TO_TEXT(ILL_FUNC, status, i); - STATUS_TO_TEXT(CMD_BUSY, status, i); - STATUS_TO_TEXT(CMDRESPEND, status, i); - STATUS_TO_TEXT(DATAEND, status, i); - STATUS_TO_TEXT(CRCFAIL, status, i); - STATUS_TO_TEXT(DATATIMEOUT, status, i); - STATUS_TO_TEXT(CMDTIMEOUT, status, i); - STATUS_TO_TEXT(RXOVERFLOW, status, i); - STATUS_TO_TEXT(TXUNDERRUN, status, i); - STATUS_TO_TEXT(RXRDY, status, i); - STATUS_TO_TEXT(TXRQ, status, i); - STATUS_TO_TEXT(ILL_ACCESS, status, i); - printk("\n"); -} - -#else -#define pr_debug_status(s) do { } while (0) -#endif - -static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) -{ - struct tmio_mmc_host *host = mmc_priv(mmc); - - if (enable) { - host->sdio_irq_enabled = 1; - sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001); - sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, - (TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ)); - } else { - sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, TMIO_SDIO_MASK_ALL); - sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000); - host->sdio_irq_enabled = 0; - } -} - -static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock) -{ - u32 clk = 0, clock; - - if (new_clock) { - for (clock = host->mmc->f_min, clk = 0x80000080; - new_clock >= (clock<<1); clk >>= 1) - clock <<= 1; - clk |= 0x100; - } - - if (host->set_clk_div) - host->set_clk_div(host->pdev, (clk>>22) & 1); - - sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff); -} - -static void tmio_mmc_clk_stop(struct tmio_mmc_host *host) -{ - struct tmio_mmc_data *pdata = mfd_get_data(host->pdev); - - /* - * Testing on sh-mobile showed that SDIO IRQs are unmasked when - * CTL_CLK_AND_WAIT_CTL gets written, so we have to disable the - * device IRQ here and restore the SDIO IRQ mask before - * re-enabling the device IRQ. - */ - if (pdata->flags & TMIO_MMC_SDIO_IRQ) - disable_irq(host->irq); - sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000); - msleep(10); - if (pdata->flags & TMIO_MMC_SDIO_IRQ) { - tmio_mmc_enable_sdio_irq(host->mmc, host->sdio_irq_enabled); - enable_irq(host->irq); - } - sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 & - sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); - msleep(10); -} - -static void tmio_mmc_clk_start(struct tmio_mmc_host *host) -{ - struct tmio_mmc_data *pdata = mfd_get_data(host->pdev); - - sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 | - sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); - msleep(10); - /* see comment in tmio_mmc_clk_stop above */ - if (pdata->flags & TMIO_MMC_SDIO_IRQ) - disable_irq(host->irq); - sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100); - msleep(10); - if (pdata->flags & TMIO_MMC_SDIO_IRQ) { - tmio_mmc_enable_sdio_irq(host->mmc, host->sdio_irq_enabled); - enable_irq(host->irq); - } -} - -static void reset(struct tmio_mmc_host *host) -{ - /* FIXME - should we set stop clock reg here */ - sd_ctrl_write16(host, CTL_RESET_SD, 0x0000); - sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000); - msleep(10); - sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); - sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001); - msleep(10); -} - -static void tmio_mmc_reset_work(struct work_struct *work) -{ - struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host, - delayed_reset_work.work); - struct mmc_request *mrq; - unsigned long flags; - - spin_lock_irqsave(&host->lock, flags); - mrq = host->mrq; - - /* request already finished */ - if (!mrq - || time_is_after_jiffies(host->last_req_ts + - msecs_to_jiffies(2000))) { - spin_unlock_irqrestore(&host->lock, flags); - return; - } - - dev_warn(&host->pdev->dev, - "timeout waiting for hardware interrupt (CMD%u)\n", - mrq->cmd->opcode); - - if (host->data) - host->data->error = -ETIMEDOUT; - else if (host->cmd) - host->cmd->error = -ETIMEDOUT; - else - mrq->cmd->error = -ETIMEDOUT; - - host->cmd = NULL; - host->data = NULL; - host->mrq = NULL; - host->force_pio = false; - - spin_unlock_irqrestore(&host->lock, flags); - reset(host); - - mmc_request_done(host->mmc, mrq); -} - -static void -tmio_mmc_finish_request(struct tmio_mmc_host *host) -{ - struct mmc_request *mrq = host->mrq; - - if (!mrq) - return; - - host->mrq = NULL; - host->cmd = NULL; - host->data = NULL; - host->force_pio = false; - - cancel_delayed_work(&host->delayed_reset_work); - - mmc_request_done(host->mmc, mrq); -} - -/* These are the bitmasks the tmio chip requires to implement the MMC response - * types. Note that R1 and R6 are the same in this scheme. */ -#define APP_CMD 0x0040 -#define RESP_NONE 0x0300 -#define RESP_R1 0x0400 -#define RESP_R1B 0x0500 -#define RESP_R2 0x0600 -#define RESP_R3 0x0700 -#define DATA_PRESENT 0x0800 -#define TRANSFER_READ 0x1000 -#define TRANSFER_MULTI 0x2000 -#define SECURITY_CMD 0x4000 - -static int -tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd) -{ - struct mmc_data *data = host->data; - int c = cmd->opcode; - - /* Command 12 is handled by hardware */ - if (cmd->opcode == 12 && !cmd->arg) { - sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001); - return 0; - } - - switch (mmc_resp_type(cmd)) { - case MMC_RSP_NONE: c |= RESP_NONE; break; - case MMC_RSP_R1: c |= RESP_R1; break; - case MMC_RSP_R1B: c |= RESP_R1B; break; - case MMC_RSP_R2: c |= RESP_R2; break; - case MMC_RSP_R3: c |= RESP_R3; break; - default: - pr_debug("Unknown response type %d\n", mmc_resp_type(cmd)); - return -EINVAL; - } - - host->cmd = cmd; - -/* FIXME - this seems to be ok commented out but the spec suggest this bit - * should be set when issuing app commands. - * if(cmd->flags & MMC_FLAG_ACMD) - * c |= APP_CMD; - */ - if (data) { - c |= DATA_PRESENT; - if (data->blocks > 1) { - sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100); - c |= TRANSFER_MULTI; - } - if (data->flags & MMC_DATA_READ) - c |= TRANSFER_READ; - } - - enable_mmc_irqs(host, TMIO_MASK_CMD); - - /* Fire off the command */ - sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg); - sd_ctrl_write16(host, CTL_SD_CMD, c); - - return 0; -} - -/* - * This chip always returns (at least?) as much data as you ask for. - * I'm unsure what happens if you ask for less than a block. This should be - * looked into to ensure that a funny length read doesnt hose the controller. - */ -static void tmio_mmc_pio_irq(struct tmio_mmc_host *host) -{ - struct mmc_data *data = host->data; - void *sg_virt; - unsigned short *buf; - unsigned int count; - unsigned long flags; - - if ((host->chan_tx || host->chan_rx) && !host->force_pio) { - pr_err("PIO IRQ in DMA mode!\n"); - return; - } else if (!data) { - pr_debug("Spurious PIO IRQ\n"); - return; - } - - sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags); - buf = (unsigned short *)(sg_virt + host->sg_off); - - count = host->sg_ptr->length - host->sg_off; - if (count > data->blksz) - count = data->blksz; - - pr_debug("count: %08x offset: %08x flags %08x\n", - count, host->sg_off, data->flags); - - /* Transfer the data */ - if (data->flags & MMC_DATA_READ) - sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); - else - sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); - - host->sg_off += count; - - tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt); - - if (host->sg_off == host->sg_ptr->length) - tmio_mmc_next_sg(host); - - return; -} - -/* needs to be called with host->lock held */ -static void tmio_mmc_do_data_irq(struct tmio_mmc_host *host) -{ - struct mmc_data *data = host->data; - struct mmc_command *stop; - - host->data = NULL; - - if (!data) { - dev_warn(&host->pdev->dev, "Spurious data end IRQ\n"); - return; - } - stop = data->stop; - - /* FIXME - return correct transfer count on errors */ - if (!data->error) - data->bytes_xfered = data->blocks * data->blksz; - else - data->bytes_xfered = 0; - - pr_debug("Completed data request\n"); - - /* - * FIXME: other drivers allow an optional stop command of any given type - * which we dont do, as the chip can auto generate them. - * Perhaps we can be smarter about when to use auto CMD12 and - * only issue the auto request when we know this is the desired - * stop command, allowing fallback to the stop command the - * upper layers expect. For now, we do what works. - */ - - if (data->flags & MMC_DATA_READ) { - if (host->chan_rx && !host->force_pio) - tmio_check_bounce_buffer(host); - dev_dbg(&host->pdev->dev, "Complete Rx request %p\n", - host->mrq); - } else { - dev_dbg(&host->pdev->dev, "Complete Tx request %p\n", - host->mrq); - } - - if (stop) { - if (stop->opcode == 12 && !stop->arg) - sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000); - else - BUG(); - } - - tmio_mmc_finish_request(host); -} - -static void tmio_mmc_data_irq(struct tmio_mmc_host *host) -{ - struct mmc_data *data; - spin_lock(&host->lock); - data = host->data; - - if (!data) - goto out; - - if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) { - /* - * Has all data been written out yet? Testing on SuperH showed, - * that in most cases the first interrupt comes already with the - * BUSY status bit clear, but on some operations, like mount or - * in the beginning of a write / sync / umount, there is one - * DATAEND interrupt with the BUSY bit set, in this cases - * waiting for one more interrupt fixes the problem. - */ - if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) { - disable_mmc_irqs(host, TMIO_STAT_DATAEND); - tasklet_schedule(&host->dma_complete); - } - } else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) { - disable_mmc_irqs(host, TMIO_STAT_DATAEND); - tasklet_schedule(&host->dma_complete); - } else { - tmio_mmc_do_data_irq(host); - disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP); - } -out: - spin_unlock(&host->lock); -} - -static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, - unsigned int stat) -{ - struct mmc_command *cmd = host->cmd; - int i, addr; - - spin_lock(&host->lock); - - if (!host->cmd) { - pr_debug("Spurious CMD irq\n"); - goto out; - } - - host->cmd = NULL; - - /* This controller is sicker than the PXA one. Not only do we need to - * drop the top 8 bits of the first response word, we also need to - * modify the order of the response for short response command types. - */ - - for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4) - cmd->resp[i] = sd_ctrl_read32(host, addr); - - if (cmd->flags & MMC_RSP_136) { - cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24); - cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24); - cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24); - cmd->resp[3] <<= 8; - } else if (cmd->flags & MMC_RSP_R3) { - cmd->resp[0] = cmd->resp[3]; - } - - if (stat & TMIO_STAT_CMDTIMEOUT) - cmd->error = -ETIMEDOUT; - else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC) - cmd->error = -EILSEQ; - - /* If there is data to handle we enable data IRQs here, and - * we will ultimatley finish the request in the data_end handler. - * If theres no data or we encountered an error, finish now. - */ - if (host->data && !cmd->error) { - if (host->data->flags & MMC_DATA_READ) { - if (host->force_pio || !host->chan_rx) - enable_mmc_irqs(host, TMIO_MASK_READOP); - else - tasklet_schedule(&host->dma_issue); - } else { - if (host->force_pio || !host->chan_tx) - enable_mmc_irqs(host, TMIO_MASK_WRITEOP); - else - tasklet_schedule(&host->dma_issue); - } - } else { - tmio_mmc_finish_request(host); - } - -out: - spin_unlock(&host->lock); - - return; -} - -static irqreturn_t tmio_mmc_irq(int irq, void *devid) -{ - struct tmio_mmc_host *host = devid; - struct tmio_mmc_data *pdata = mfd_get_data(host->pdev); - unsigned int ireg, irq_mask, status; - unsigned int sdio_ireg, sdio_irq_mask, sdio_status; - - pr_debug("MMC IRQ begin\n"); - - status = sd_ctrl_read32(host, CTL_STATUS); - irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK); - ireg = status & TMIO_MASK_IRQ & ~irq_mask; - - sdio_ireg = 0; - if (!ireg && pdata->flags & TMIO_MMC_SDIO_IRQ) { - sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS); - sdio_irq_mask = sd_ctrl_read16(host, CTL_SDIO_IRQ_MASK); - sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL & ~sdio_irq_mask; - - sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status & ~TMIO_SDIO_MASK_ALL); - - if (sdio_ireg && !host->sdio_irq_enabled) { - pr_warning("tmio_mmc: Spurious SDIO IRQ, disabling! 0x%04x 0x%04x 0x%04x\n", - sdio_status, sdio_irq_mask, sdio_ireg); - tmio_mmc_enable_sdio_irq(host->mmc, 0); - goto out; - } - - if (host->mmc->caps & MMC_CAP_SDIO_IRQ && - sdio_ireg & TMIO_SDIO_STAT_IOIRQ) - mmc_signal_sdio_irq(host->mmc); - - if (sdio_ireg) - goto out; - } - - pr_debug_status(status); - pr_debug_status(ireg); - - if (!ireg) { - disable_mmc_irqs(host, status & ~irq_mask); - - pr_warning("tmio_mmc: Spurious irq, disabling! " - "0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg); - pr_debug_status(status); - - goto out; - } - - while (ireg) { - /* Card insert / remove attempts */ - if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) { - ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT | - TMIO_STAT_CARD_REMOVE); - mmc_detect_change(host->mmc, msecs_to_jiffies(100)); - } - - /* CRC and other errors */ -/* if (ireg & TMIO_STAT_ERR_IRQ) - * handled |= tmio_error_irq(host, irq, stat); - */ - - /* Command completion */ - if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) { - ack_mmc_irqs(host, - TMIO_STAT_CMDRESPEND | - TMIO_STAT_CMDTIMEOUT); - tmio_mmc_cmd_irq(host, status); - } - - /* Data transfer */ - if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) { - ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ); - tmio_mmc_pio_irq(host); - } - - /* Data transfer completion */ - if (ireg & TMIO_STAT_DATAEND) { - ack_mmc_irqs(host, TMIO_STAT_DATAEND); - tmio_mmc_data_irq(host); - } - - /* Check status - keep going until we've handled it all */ - status = sd_ctrl_read32(host, CTL_STATUS); - irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK); - ireg = status & TMIO_MASK_IRQ & ~irq_mask; - - pr_debug("Status at end of loop: %08x\n", status); - pr_debug_status(status); - } - pr_debug("MMC IRQ end\n"); - -out: - return IRQ_HANDLED; -} - -#ifdef CONFIG_TMIO_MMC_DMA -static void tmio_check_bounce_buffer(struct tmio_mmc_host *host) -{ - if (host->sg_ptr == &host->bounce_sg) { - unsigned long flags; - void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags); - memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length); - tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr); - } -} - -static void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable) -{ -#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE) - /* Switch DMA mode on or off - SuperH specific? */ - sd_ctrl_write16(host, 0xd8, enable ? 2 : 0); -#endif -} - -static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) -{ - struct scatterlist *sg = host->sg_ptr, *sg_tmp; - struct dma_async_tx_descriptor *desc = NULL; - struct dma_chan *chan = host->chan_rx; - struct tmio_mmc_data *pdata = mfd_get_data(host->pdev); - dma_cookie_t cookie; - int ret, i; - bool aligned = true, multiple = true; - unsigned int align = (1 << pdata->dma->alignment_shift) - 1; - - for_each_sg(sg, sg_tmp, host->sg_len, i) { - if (sg_tmp->offset & align) - aligned = false; - if (sg_tmp->length & align) { - multiple = false; - break; - } - } - - if ((!aligned && (host->sg_len > 1 || sg->length > PAGE_CACHE_SIZE || - align >= MAX_ALIGN)) || !multiple) { - ret = -EINVAL; - goto pio; - } - - if (sg->length < TMIO_MIN_DMA_LEN) { - host->force_pio = true; - return; - } - - disable_mmc_irqs(host, TMIO_STAT_RXRDY); - - /* The only sg element can be unaligned, use our bounce buffer then */ - if (!aligned) { - sg_init_one(&host->bounce_sg, host->bounce_buf, sg->length); - host->sg_ptr = &host->bounce_sg; - sg = host->sg_ptr; - } - - ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_FROM_DEVICE); - if (ret > 0) - desc = chan->device->device_prep_slave_sg(chan, sg, ret, - DMA_FROM_DEVICE, DMA_CTRL_ACK); - - if (desc) - cookie = dmaengine_submit(desc); - - dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", - __func__, host->sg_len, ret, cookie, host->mrq); - -pio: - if (!desc) { - /* DMA failed, fall back to PIO */ - if (ret >= 0) - ret = -EIO; - host->chan_rx = NULL; - dma_release_channel(chan); - /* Free the Tx channel too */ - chan = host->chan_tx; - if (chan) { - host->chan_tx = NULL; - dma_release_channel(chan); - } - dev_warn(&host->pdev->dev, - "DMA failed: %d, falling back to PIO\n", ret); - tmio_mmc_enable_dma(host, false); - } - - dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__, - desc, cookie, host->sg_len); -} - -static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) -{ - struct scatterlist *sg = host->sg_ptr, *sg_tmp; - struct dma_async_tx_descriptor *desc = NULL; - struct dma_chan *chan = host->chan_tx; - struct tmio_mmc_data *pdata = mfd_get_data(host->pdev); - dma_cookie_t cookie; - int ret, i; - bool aligned = true, multiple = true; - unsigned int align = (1 << pdata->dma->alignment_shift) - 1; - - for_each_sg(sg, sg_tmp, host->sg_len, i) { - if (sg_tmp->offset & align) - aligned = false; - if (sg_tmp->length & align) { - multiple = false; - break; - } - } - - if ((!aligned && (host->sg_len > 1 || sg->length > PAGE_CACHE_SIZE || - align >= MAX_ALIGN)) || !multiple) { - ret = -EINVAL; - goto pio; - } - - if (sg->length < TMIO_MIN_DMA_LEN) { - host->force_pio = true; - return; - } - - disable_mmc_irqs(host, TMIO_STAT_TXRQ); - - /* The only sg element can be unaligned, use our bounce buffer then */ - if (!aligned) { - unsigned long flags; - void *sg_vaddr = tmio_mmc_kmap_atomic(sg, &flags); - sg_init_one(&host->bounce_sg, host->bounce_buf, sg->length); - memcpy(host->bounce_buf, sg_vaddr, host->bounce_sg.length); - tmio_mmc_kunmap_atomic(sg, &flags, sg_vaddr); - host->sg_ptr = &host->bounce_sg; - sg = host->sg_ptr; - } - - ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_TO_DEVICE); - if (ret > 0) - desc = chan->device->device_prep_slave_sg(chan, sg, ret, - DMA_TO_DEVICE, DMA_CTRL_ACK); - - if (desc) - cookie = dmaengine_submit(desc); - - dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", - __func__, host->sg_len, ret, cookie, host->mrq); - -pio: - if (!desc) { - /* DMA failed, fall back to PIO */ - if (ret >= 0) - ret = -EIO; - host->chan_tx = NULL; - dma_release_channel(chan); - /* Free the Rx channel too */ - chan = host->chan_rx; - if (chan) { - host->chan_rx = NULL; - dma_release_channel(chan); - } - dev_warn(&host->pdev->dev, - "DMA failed: %d, falling back to PIO\n", ret); - tmio_mmc_enable_dma(host, false); - } - - dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d\n", __func__, - desc, cookie); -} - -static void tmio_mmc_start_dma(struct tmio_mmc_host *host, - struct mmc_data *data) -{ - if (data->flags & MMC_DATA_READ) { - if (host->chan_rx) - tmio_mmc_start_dma_rx(host); - } else { - if (host->chan_tx) - tmio_mmc_start_dma_tx(host); - } -} - -static void tmio_issue_tasklet_fn(unsigned long priv) -{ - struct tmio_mmc_host *host = (struct tmio_mmc_host *)priv; - struct dma_chan *chan = NULL; - - spin_lock_irq(&host->lock); - - if (host && host->data) { - if (host->data->flags & MMC_DATA_READ) - chan = host->chan_rx; - else - chan = host->chan_tx; - } - - spin_unlock_irq(&host->lock); - - enable_mmc_irqs(host, TMIO_STAT_DATAEND); - - if (chan) - dma_async_issue_pending(chan); -} - -static void tmio_tasklet_fn(unsigned long arg) -{ - struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg; - - spin_lock_irq(&host->lock); - - if (!host->data) - goto out; - - if (host->data->flags & MMC_DATA_READ) - dma_unmap_sg(host->chan_rx->device->dev, - host->sg_ptr, host->sg_len, - DMA_FROM_DEVICE); - else - dma_unmap_sg(host->chan_tx->device->dev, - host->sg_ptr, host->sg_len, - DMA_TO_DEVICE); - - tmio_mmc_do_data_irq(host); -out: - spin_unlock_irq(&host->lock); -} - -/* It might be necessary to make filter MFD specific */ -static bool tmio_mmc_filter(struct dma_chan *chan, void *arg) -{ - dev_dbg(chan->device->dev, "%s: slave data %p\n", __func__, arg); - chan->private = arg; - return true; -} - -static void tmio_mmc_request_dma(struct tmio_mmc_host *host, - struct tmio_mmc_data *pdata) -{ - /* We can only either use DMA for both Tx and Rx or not use it at all */ - if (pdata->dma) { - dma_cap_mask_t mask; - - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - host->chan_tx = dma_request_channel(mask, tmio_mmc_filter, - pdata->dma->chan_priv_tx); - dev_dbg(&host->pdev->dev, "%s: TX: got channel %p\n", __func__, - host->chan_tx); - - if (!host->chan_tx) - return; - - host->chan_rx = dma_request_channel(mask, tmio_mmc_filter, - pdata->dma->chan_priv_rx); - dev_dbg(&host->pdev->dev, "%s: RX: got channel %p\n", __func__, - host->chan_rx); - - if (!host->chan_rx) { - dma_release_channel(host->chan_tx); - host->chan_tx = NULL; - return; - } - - tasklet_init(&host->dma_complete, tmio_tasklet_fn, (unsigned long)host); - tasklet_init(&host->dma_issue, tmio_issue_tasklet_fn, (unsigned long)host); - - tmio_mmc_enable_dma(host, true); - } -} - -static void tmio_mmc_release_dma(struct tmio_mmc_host *host) -{ - if (host->chan_tx) { - struct dma_chan *chan = host->chan_tx; - host->chan_tx = NULL; - dma_release_channel(chan); - } - if (host->chan_rx) { - struct dma_chan *chan = host->chan_rx; - host->chan_rx = NULL; - dma_release_channel(chan); - } -} -#else -static void tmio_check_bounce_buffer(struct tmio_mmc_host *host) -{ -} - -static void tmio_mmc_start_dma(struct tmio_mmc_host *host, - struct mmc_data *data) -{ -} - -static void tmio_mmc_request_dma(struct tmio_mmc_host *host, - struct tmio_mmc_data *pdata) -{ - host->chan_tx = NULL; - host->chan_rx = NULL; -} - -static void tmio_mmc_release_dma(struct tmio_mmc_host *host) -{ -} -#endif - -static int tmio_mmc_start_data(struct tmio_mmc_host *host, - struct mmc_data *data) -{ - struct tmio_mmc_data *pdata = mfd_get_data(host->pdev); - - pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n", - data->blksz, data->blocks); - - /* Some hardware cannot perform 2 byte requests in 4 bit mode */ - if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) { - int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES; - - if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) { - pr_err("%s: %d byte block unsupported in 4 bit mode\n", - mmc_hostname(host->mmc), data->blksz); - return -EINVAL; - } - } - - tmio_mmc_init_sg(host, data); - host->data = data; - - /* Set transfer length / blocksize */ - sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz); - sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks); - - tmio_mmc_start_dma(host, data); - - return 0; -} - -/* Process requests from the MMC layer */ -static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) -{ - struct tmio_mmc_host *host = mmc_priv(mmc); - int ret; - - if (host->mrq) - pr_debug("request not null\n"); - - host->last_req_ts = jiffies; - wmb(); - host->mrq = mrq; - - if (mrq->data) { - ret = tmio_mmc_start_data(host, mrq->data); - if (ret) - goto fail; - } - - ret = tmio_mmc_start_command(host, mrq->cmd); - if (!ret) { - schedule_delayed_work(&host->delayed_reset_work, - msecs_to_jiffies(2000)); - return; - } - -fail: - host->mrq = NULL; - host->force_pio = false; - mrq->cmd->error = ret; - mmc_request_done(mmc, mrq); -} - -/* Set MMC clock / power. - * Note: This controller uses a simple divider scheme therefore it cannot - * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as - * MMC wont run that fast, it has to be clocked at 12MHz which is the next - * slowest setting. - */ -static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) -{ - struct tmio_mmc_host *host = mmc_priv(mmc); - - if (ios->clock) - tmio_mmc_set_clock(host, ios->clock); - - /* Power sequence - OFF -> ON -> UP */ - switch (ios->power_mode) { - case MMC_POWER_OFF: /* power down SD bus */ - if (host->set_pwr) - host->set_pwr(host->pdev, 0); - tmio_mmc_clk_stop(host); - break; - case MMC_POWER_ON: /* power up SD bus */ - if (host->set_pwr) - host->set_pwr(host->pdev, 1); - break; - case MMC_POWER_UP: /* start bus clock */ - tmio_mmc_clk_start(host); - break; - } - - switch (ios->bus_width) { - case MMC_BUS_WIDTH_1: - sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0); - break; - case MMC_BUS_WIDTH_4: - sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0); - break; - } - - /* Let things settle. delay taken from winCE driver */ - udelay(140); -} - -static int tmio_mmc_get_ro(struct mmc_host *mmc) -{ - struct tmio_mmc_host *host = mmc_priv(mmc); - struct tmio_mmc_data *pdata = mfd_get_data(host->pdev); - - return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) || - (sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)) ? 0 : 1; -} - -static int tmio_mmc_get_cd(struct mmc_host *mmc) -{ - struct tmio_mmc_host *host = mmc_priv(mmc); - struct tmio_mmc_data *pdata = mfd_get_data(host->pdev); - - if (!pdata->get_cd) - return -ENOSYS; - else - return pdata->get_cd(host->pdev); -} - -static const struct mmc_host_ops tmio_mmc_ops = { - .request = tmio_mmc_request, - .set_ios = tmio_mmc_set_ios, - .get_ro = tmio_mmc_get_ro, - .get_cd = tmio_mmc_get_cd, - .enable_sdio_irq = tmio_mmc_enable_sdio_irq, -}; +#include "tmio_mmc.h" #ifdef CONFIG_PM static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state) @@ -1245,138 +62,54 @@ out: #define tmio_mmc_resume NULL #endif -static int __devinit tmio_mmc_probe(struct platform_device *dev) +static int __devinit tmio_mmc_probe(struct platform_device *pdev) { - const struct mfd_cell *cell = mfd_get_cell(dev); + const struct mfd_cell *cell = mfd_get_cell(pdev); struct tmio_mmc_data *pdata; - struct resource *res_ctl; struct tmio_mmc_host *host; - struct mmc_host *mmc; int ret = -EINVAL; - u32 irq_mask = TMIO_MASK_CMD; - if (dev->num_resources != 2) + if (pdev->num_resources != 2) goto out; - res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res_ctl) - goto out; - - pdata = mfd_get_data(dev); + pdata = mfd_get_data(pdev); if (!pdata || !pdata->hclk) goto out; - ret = -ENOMEM; - - mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &dev->dev); - if (!mmc) - goto out; - - host = mmc_priv(mmc); - host->mmc = mmc; - host->pdev = dev; - platform_set_drvdata(dev, mmc); - - host->set_pwr = pdata->set_pwr; - host->set_clk_div = pdata->set_clk_div; - - /* SD control register space size is 0x200, 0x400 for bus_shift=1 */ - host->bus_shift = resource_size(res_ctl) >> 10; - - host->ctl = ioremap(res_ctl->start, resource_size(res_ctl)); - if (!host->ctl) - goto host_free; - - mmc->ops = &tmio_mmc_ops; - mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities; - mmc->f_max = pdata->hclk; - mmc->f_min = mmc->f_max / 512; - mmc->max_segs = 32; - mmc->max_blk_size = 512; - mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) * - mmc->max_segs; - mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; - mmc->max_seg_size = mmc->max_req_size; - if (pdata->ocr_mask) - mmc->ocr_avail = pdata->ocr_mask; - else - mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - /* Tell the MFD core we are ready to be enabled */ if (cell->enable) { - ret = cell->enable(dev); + ret = cell->enable(pdev); if (ret) - goto unmap_ctl; + goto out; } - tmio_mmc_clk_stop(host); - reset(host); - - ret = platform_get_irq(dev, 0); - if (ret >= 0) - host->irq = ret; - else - goto cell_disable; - - disable_mmc_irqs(host, TMIO_MASK_ALL); - if (pdata->flags & TMIO_MMC_SDIO_IRQ) - tmio_mmc_enable_sdio_irq(mmc, 0); - - ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED | - IRQF_TRIGGER_FALLING, dev_name(&dev->dev), host); + ret = tmio_mmc_host_probe(&host, pdev, pdata); if (ret) goto cell_disable; - spin_lock_init(&host->lock); - - /* Init delayed work for request timeouts */ - INIT_DELAYED_WORK(&host->delayed_reset_work, tmio_mmc_reset_work); - - /* See if we also get DMA */ - tmio_mmc_request_dma(host, pdata); - - mmc_add_host(mmc); - pr_info("%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc), (unsigned long)host->ctl, host->irq); - /* Unmask the IRQs we want to know about */ - if (!host->chan_rx) - irq_mask |= TMIO_MASK_READOP; - if (!host->chan_tx) - irq_mask |= TMIO_MASK_WRITEOP; - enable_mmc_irqs(host, irq_mask); - return 0; cell_disable: if (cell->disable) - cell->disable(dev); -unmap_ctl: - iounmap(host->ctl); -host_free: - mmc_free_host(mmc); + cell->disable(pdev); out: return ret; } -static int __devexit tmio_mmc_remove(struct platform_device *dev) +static int __devexit tmio_mmc_remove(struct platform_device *pdev) { - const struct mfd_cell *cell = mfd_get_cell(dev); - struct mmc_host *mmc = platform_get_drvdata(dev); + const struct mfd_cell *cell = mfd_get_cell(pdev); + struct mmc_host *mmc = platform_get_drvdata(pdev); - platform_set_drvdata(dev, NULL); + platform_set_drvdata(pdev, NULL); if (mmc) { - struct tmio_mmc_host *host = mmc_priv(mmc); - mmc_remove_host(mmc); - cancel_delayed_work_sync(&host->delayed_reset_work); - tmio_mmc_release_dma(host); - free_irq(host->irq, host); + tmio_mmc_host_remove(mmc_priv(mmc)); if (cell->disable) - cell->disable(dev); - iounmap(host->ctl); - mmc_free_host(mmc); + cell->disable(pdev); } return 0; diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h new file mode 100644 index 00000000000..8dedf0a6934 --- /dev/null +++ b/drivers/mmc/host/tmio_mmc.h @@ -0,0 +1,145 @@ +/* + * linux/drivers/mmc/host/tmio_mmc.h + * + * Copyright (C) 2007 Ian Molton + * Copyright (C) 2004 Ian Molton + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Driver for the MMC / SD / SDIO cell found in: + * + * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3 + */ + +#ifndef TMIO_MMC_H +#define TMIO_MMC_H + +#include +#include + +/* Definitions for values the CTRL_STATUS register can take. */ +#define TMIO_STAT_CMDRESPEND 0x00000001 +#define TMIO_STAT_DATAEND 0x00000004 +#define TMIO_STAT_CARD_REMOVE 0x00000008 +#define TMIO_STAT_CARD_INSERT 0x00000010 +#define TMIO_STAT_SIGSTATE 0x00000020 +#define TMIO_STAT_WRPROTECT 0x00000080 +#define TMIO_STAT_CARD_REMOVE_A 0x00000100 +#define TMIO_STAT_CARD_INSERT_A 0x00000200 +#define TMIO_STAT_SIGSTATE_A 0x00000400 +#define TMIO_STAT_CMD_IDX_ERR 0x00010000 +#define TMIO_STAT_CRCFAIL 0x00020000 +#define TMIO_STAT_STOPBIT_ERR 0x00040000 +#define TMIO_STAT_DATATIMEOUT 0x00080000 +#define TMIO_STAT_RXOVERFLOW 0x00100000 +#define TMIO_STAT_TXUNDERRUN 0x00200000 +#define TMIO_STAT_CMDTIMEOUT 0x00400000 +#define TMIO_STAT_RXRDY 0x01000000 +#define TMIO_STAT_TXRQ 0x02000000 +#define TMIO_STAT_ILL_FUNC 0x20000000 +#define TMIO_STAT_CMD_BUSY 0x40000000 +#define TMIO_STAT_ILL_ACCESS 0x80000000 + +/* Definitions for values the CTRL_SDIO_STATUS register can take. */ +#define TMIO_SDIO_STAT_IOIRQ 0x0001 +#define TMIO_SDIO_STAT_EXPUB52 0x4000 +#define TMIO_SDIO_STAT_EXWT 0x8000 +#define TMIO_SDIO_MASK_ALL 0xc007 + +/* Define some IRQ masks */ +/* This is the mask used at reset by the chip */ +#define TMIO_MASK_ALL 0x837f031d +#define TMIO_MASK_READOP (TMIO_STAT_RXRDY | TMIO_STAT_DATAEND) +#define TMIO_MASK_WRITEOP (TMIO_STAT_TXRQ | TMIO_STAT_DATAEND) +#define TMIO_MASK_CMD (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT | \ + TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT) +#define TMIO_MASK_IRQ (TMIO_MASK_READOP | TMIO_MASK_WRITEOP | TMIO_MASK_CMD) + +struct tmio_mmc_data; + +struct tmio_mmc_host { + void __iomem *ctl; + unsigned long bus_shift; + struct mmc_command *cmd; + struct mmc_request *mrq; + struct mmc_data *data; + struct mmc_host *mmc; + int irq; + unsigned int sdio_irq_enabled; + + /* Callbacks for clock / power control */ + void (*set_pwr)(struct platform_device *host, int state); + void (*set_clk_div)(struct platform_device *host, int state); + + /* pio related stuff */ + struct scatterlist *sg_ptr; + struct scatterlist *sg_orig; + unsigned int sg_len; + unsigned int sg_off; + + struct platform_device *pdev; + struct tmio_mmc_data *pdata; + + /* DMA support */ + bool force_pio; + struct dma_chan *chan_rx; + struct dma_chan *chan_tx; + struct tasklet_struct dma_complete; + struct tasklet_struct dma_issue; + struct scatterlist bounce_sg; + u8 *bounce_buf; + + /* Track lost interrupts */ + struct delayed_work delayed_reset_work; + spinlock_t lock; + unsigned long last_req_ts; +}; + +int tmio_mmc_host_probe(struct tmio_mmc_host **host, + struct platform_device *pdev, + struct tmio_mmc_data *pdata); +void tmio_mmc_host_remove(struct tmio_mmc_host *host); +void tmio_mmc_do_data_irq(struct tmio_mmc_host *host); + +void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i); +void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i); + +static inline char *tmio_mmc_kmap_atomic(struct scatterlist *sg, + unsigned long *flags) +{ + local_irq_save(*flags); + return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; +} + +static inline void tmio_mmc_kunmap_atomic(struct scatterlist *sg, + unsigned long *flags, void *virt) +{ + kunmap_atomic(virt - sg->offset, KM_BIO_SRC_IRQ); + local_irq_restore(*flags); +} + +#ifdef CONFIG_TMIO_MMC_DMA +void tmio_mmc_start_dma(struct tmio_mmc_host *host, struct mmc_data *data); +void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata); +void tmio_mmc_release_dma(struct tmio_mmc_host *host); +#else +static inline void tmio_mmc_start_dma(struct tmio_mmc_host *host, + struct mmc_data *data) +{ +} + +static inline void tmio_mmc_request_dma(struct tmio_mmc_host *host, + struct tmio_mmc_data *pdata) +{ + host->chan_tx = NULL; + host->chan_rx = NULL; +} + +static inline void tmio_mmc_release_dma(struct tmio_mmc_host *host) +{ +} +#endif + +#endif diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c new file mode 100644 index 00000000000..c505278be43 --- /dev/null +++ b/drivers/mmc/host/tmio_mmc_dma.c @@ -0,0 +1,316 @@ +/* + * linux/drivers/mmc/tmio_mmc_dma.c + * + * Copyright (C) 2010-2011 Guennadi Liakhovetski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * DMA function for TMIO MMC implementations + */ + +#include +#include +#include +#include +#include +#include + +#include "tmio_mmc.h" + +#define TMIO_MMC_MIN_DMA_LEN 8 + +static void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable) +{ +#if defined(CONFIG_SUPERH) || defined(CONFIG_ARCH_SHMOBILE) + /* Switch DMA mode on or off - SuperH specific? */ + writew(enable ? 2 : 0, host->ctl + (0xd8 << host->bus_shift)); +#endif +} + +static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) +{ + struct scatterlist *sg = host->sg_ptr, *sg_tmp; + struct dma_async_tx_descriptor *desc = NULL; + struct dma_chan *chan = host->chan_rx; + struct tmio_mmc_data *pdata = host->pdata; + dma_cookie_t cookie; + int ret, i; + bool aligned = true, multiple = true; + unsigned int align = (1 << pdata->dma->alignment_shift) - 1; + + for_each_sg(sg, sg_tmp, host->sg_len, i) { + if (sg_tmp->offset & align) + aligned = false; + if (sg_tmp->length & align) { + multiple = false; + break; + } + } + + if ((!aligned && (host->sg_len > 1 || sg->length > PAGE_CACHE_SIZE || + (align & PAGE_MASK))) || !multiple) { + ret = -EINVAL; + goto pio; + } + + if (sg->length < TMIO_MMC_MIN_DMA_LEN) { + host->force_pio = true; + return; + } + + tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_RXRDY); + + /* The only sg element can be unaligned, use our bounce buffer then */ + if (!aligned) { + sg_init_one(&host->bounce_sg, host->bounce_buf, sg->length); + host->sg_ptr = &host->bounce_sg; + sg = host->sg_ptr; + } + + ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_FROM_DEVICE); + if (ret > 0) + desc = chan->device->device_prep_slave_sg(chan, sg, ret, + DMA_FROM_DEVICE, DMA_CTRL_ACK); + + if (desc) { + cookie = dmaengine_submit(desc); + if (cookie < 0) { + desc = NULL; + ret = cookie; + } + } + dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", + __func__, host->sg_len, ret, cookie, host->mrq); + +pio: + if (!desc) { + /* DMA failed, fall back to PIO */ + if (ret >= 0) + ret = -EIO; + host->chan_rx = NULL; + dma_release_channel(chan); + /* Free the Tx channel too */ + chan = host->chan_tx; + if (chan) { + host->chan_tx = NULL; + dma_release_channel(chan); + } + dev_warn(&host->pdev->dev, + "DMA failed: %d, falling back to PIO\n", ret); + tmio_mmc_enable_dma(host, false); + } + + dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__, + desc, cookie, host->sg_len); +} + +static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) +{ + struct scatterlist *sg = host->sg_ptr, *sg_tmp; + struct dma_async_tx_descriptor *desc = NULL; + struct dma_chan *chan = host->chan_tx; + struct tmio_mmc_data *pdata = host->pdata; + dma_cookie_t cookie; + int ret, i; + bool aligned = true, multiple = true; + unsigned int align = (1 << pdata->dma->alignment_shift) - 1; + + for_each_sg(sg, sg_tmp, host->sg_len, i) { + if (sg_tmp->offset & align) + aligned = false; + if (sg_tmp->length & align) { + multiple = false; + break; + } + } + + if ((!aligned && (host->sg_len > 1 || sg->length > PAGE_CACHE_SIZE || + (align & PAGE_MASK))) || !multiple) { + ret = -EINVAL; + goto pio; + } + + if (sg->length < TMIO_MMC_MIN_DMA_LEN) { + host->force_pio = true; + return; + } + + tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_TXRQ); + + /* The only sg element can be unaligned, use our bounce buffer then */ + if (!aligned) { + unsigned long flags; + void *sg_vaddr = tmio_mmc_kmap_atomic(sg, &flags); + sg_init_one(&host->bounce_sg, host->bounce_buf, sg->length); + memcpy(host->bounce_buf, sg_vaddr, host->bounce_sg.length); + tmio_mmc_kunmap_atomic(sg, &flags, sg_vaddr); + host->sg_ptr = &host->bounce_sg; + sg = host->sg_ptr; + } + + ret = dma_map_sg(chan->device->dev, sg, host->sg_len, DMA_TO_DEVICE); + if (ret > 0) + desc = chan->device->device_prep_slave_sg(chan, sg, ret, + DMA_TO_DEVICE, DMA_CTRL_ACK); + + if (desc) { + cookie = dmaengine_submit(desc); + if (cookie < 0) { + desc = NULL; + ret = cookie; + } + } + dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n", + __func__, host->sg_len, ret, cookie, host->mrq); + +pio: + if (!desc) { + /* DMA failed, fall back to PIO */ + if (ret >= 0) + ret = -EIO; + host->chan_tx = NULL; + dma_release_channel(chan); + /* Free the Rx channel too */ + chan = host->chan_rx; + if (chan) { + host->chan_rx = NULL; + dma_release_channel(chan); + } + dev_warn(&host->pdev->dev, + "DMA failed: %d, falling back to PIO\n", ret); + tmio_mmc_enable_dma(host, false); + } + + dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d\n", __func__, + desc, cookie); +} + +void tmio_mmc_start_dma(struct tmio_mmc_host *host, + struct mmc_data *data) +{ + if (data->flags & MMC_DATA_READ) { + if (host->chan_rx) + tmio_mmc_start_dma_rx(host); + } else { + if (host->chan_tx) + tmio_mmc_start_dma_tx(host); + } +} + +static void tmio_mmc_issue_tasklet_fn(unsigned long priv) +{ + struct tmio_mmc_host *host = (struct tmio_mmc_host *)priv; + struct dma_chan *chan = NULL; + + spin_lock_irq(&host->lock); + + if (host && host->data) { + if (host->data->flags & MMC_DATA_READ) + chan = host->chan_rx; + else + chan = host->chan_tx; + } + + spin_unlock_irq(&host->lock); + + tmio_mmc_enable_mmc_irqs(host, TMIO_STAT_DATAEND); + + if (chan) + dma_async_issue_pending(chan); +} + +static void tmio_mmc_tasklet_fn(unsigned long arg) +{ + struct tmio_mmc_host *host = (struct tmio_mmc_host *)arg; + + spin_lock_irq(&host->lock); + + if (!host->data) + goto out; + + if (host->data->flags & MMC_DATA_READ) + dma_unmap_sg(host->chan_rx->device->dev, + host->sg_ptr, host->sg_len, + DMA_FROM_DEVICE); + else + dma_unmap_sg(host->chan_tx->device->dev, + host->sg_ptr, host->sg_len, + DMA_TO_DEVICE); + + tmio_mmc_do_data_irq(host); +out: + spin_unlock_irq(&host->lock); +} + +/* It might be necessary to make filter MFD specific */ +static bool tmio_mmc_filter(struct dma_chan *chan, void *arg) +{ + dev_dbg(chan->device->dev, "%s: slave data %p\n", __func__, arg); + chan->private = arg; + return true; +} + +void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata) +{ + /* We can only either use DMA for both Tx and Rx or not use it at all */ + if (pdata->dma) { + dma_cap_mask_t mask; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + host->chan_tx = dma_request_channel(mask, tmio_mmc_filter, + pdata->dma->chan_priv_tx); + dev_dbg(&host->pdev->dev, "%s: TX: got channel %p\n", __func__, + host->chan_tx); + + if (!host->chan_tx) + return; + + host->chan_rx = dma_request_channel(mask, tmio_mmc_filter, + pdata->dma->chan_priv_rx); + dev_dbg(&host->pdev->dev, "%s: RX: got channel %p\n", __func__, + host->chan_rx); + + if (!host->chan_rx) + goto ereqrx; + + host->bounce_buf = (u8 *)__get_free_page(GFP_KERNEL | GFP_DMA); + if (!host->bounce_buf) + goto ebouncebuf; + + tasklet_init(&host->dma_complete, tmio_mmc_tasklet_fn, (unsigned long)host); + tasklet_init(&host->dma_issue, tmio_mmc_issue_tasklet_fn, (unsigned long)host); + + tmio_mmc_enable_dma(host, true); + + return; +ebouncebuf: + dma_release_channel(host->chan_rx); + host->chan_rx = NULL; +ereqrx: + dma_release_channel(host->chan_tx); + host->chan_tx = NULL; + return; + } +} + +void tmio_mmc_release_dma(struct tmio_mmc_host *host) +{ + if (host->chan_tx) { + struct dma_chan *chan = host->chan_tx; + host->chan_tx = NULL; + dma_release_channel(chan); + } + if (host->chan_rx) { + struct dma_chan *chan = host->chan_rx; + host->chan_rx = NULL; + dma_release_channel(chan); + } + if (host->bounce_buf) { + free_pages((unsigned long)host->bounce_buf, 0); + host->bounce_buf = NULL; + } +} diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c new file mode 100644 index 00000000000..a7406e3701c --- /dev/null +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -0,0 +1,923 @@ +/* + * linux/drivers/mmc/host/tmio_mmc_pio.c + * + * Copyright (C) 2011 Guennadi Liakhovetski + * Copyright (C) 2007 Ian Molton + * Copyright (C) 2004 Ian Molton + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Driver for the MMC / SD / SDIO IP found in: + * + * TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs + * + * This driver draws mainly on scattered spec sheets, Reverse engineering + * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit + * support). (Further 4 bit support from a later datasheet). + * + * TODO: + * Investigate using a workqueue for PIO transfers + * Eliminate FIXMEs + * SDIO support + * Better Power management + * Handle MMC errors better + * double buffer support + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "tmio_mmc.h" + +#define CTL_SD_CMD 0x00 +#define CTL_ARG_REG 0x04 +#define CTL_STOP_INTERNAL_ACTION 0x08 +#define CTL_XFER_BLK_COUNT 0xa +#define CTL_RESPONSE 0x0c +#define CTL_STATUS 0x1c +#define CTL_IRQ_MASK 0x20 +#define CTL_SD_CARD_CLK_CTL 0x24 +#define CTL_SD_XFER_LEN 0x26 +#define CTL_SD_MEM_CARD_OPT 0x28 +#define CTL_SD_ERROR_DETAIL_STATUS 0x2c +#define CTL_SD_DATA_PORT 0x30 +#define CTL_TRANSACTION_CTL 0x34 +#define CTL_SDIO_STATUS 0x36 +#define CTL_SDIO_IRQ_MASK 0x38 +#define CTL_RESET_SD 0xe0 +#define CTL_SDIO_REGS 0x100 +#define CTL_CLK_AND_WAIT_CTL 0x138 +#define CTL_RESET_SDIO 0x1e0 + +static u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr) +{ + return readw(host->ctl + (addr << host->bus_shift)); +} + +static void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr, + u16 *buf, int count) +{ + readsw(host->ctl + (addr << host->bus_shift), buf, count); +} + +static u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr) +{ + return readw(host->ctl + (addr << host->bus_shift)) | + readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16; +} + +static void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val) +{ + writew(val, host->ctl + (addr << host->bus_shift)); +} + +static void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr, + u16 *buf, int count) +{ + writesw(host->ctl + (addr << host->bus_shift), buf, count); +} + +static void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val) +{ + writew(val, host->ctl + (addr << host->bus_shift)); + writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift)); +} + +void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i) +{ + u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) & ~(i & TMIO_MASK_IRQ); + sd_ctrl_write32(host, CTL_IRQ_MASK, mask); +} + +void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i) +{ + u32 mask = sd_ctrl_read32(host, CTL_IRQ_MASK) | (i & TMIO_MASK_IRQ); + sd_ctrl_write32(host, CTL_IRQ_MASK, mask); +} + +static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i) +{ + sd_ctrl_write32(host, CTL_STATUS, ~i); +} + +static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data) +{ + host->sg_len = data->sg_len; + host->sg_ptr = data->sg; + host->sg_orig = data->sg; + host->sg_off = 0; +} + +static int tmio_mmc_next_sg(struct tmio_mmc_host *host) +{ + host->sg_ptr = sg_next(host->sg_ptr); + host->sg_off = 0; + return --host->sg_len; +} + +#ifdef CONFIG_MMC_DEBUG + +#define STATUS_TO_TEXT(a, status, i) \ + do { \ + if (status & TMIO_STAT_##a) { \ + if (i++) \ + printk(" | "); \ + printk(#a); \ + } \ + } while (0) + +static void pr_debug_status(u32 status) +{ + int i = 0; + printk(KERN_DEBUG "status: %08x = ", status); + STATUS_TO_TEXT(CARD_REMOVE, status, i); + STATUS_TO_TEXT(CARD_INSERT, status, i); + STATUS_TO_TEXT(SIGSTATE, status, i); + STATUS_TO_TEXT(WRPROTECT, status, i); + STATUS_TO_TEXT(CARD_REMOVE_A, status, i); + STATUS_TO_TEXT(CARD_INSERT_A, status, i); + STATUS_TO_TEXT(SIGSTATE_A, status, i); + STATUS_TO_TEXT(CMD_IDX_ERR, status, i); + STATUS_TO_TEXT(STOPBIT_ERR, status, i); + STATUS_TO_TEXT(ILL_FUNC, status, i); + STATUS_TO_TEXT(CMD_BUSY, status, i); + STATUS_TO_TEXT(CMDRESPEND, status, i); + STATUS_TO_TEXT(DATAEND, status, i); + STATUS_TO_TEXT(CRCFAIL, status, i); + STATUS_TO_TEXT(DATATIMEOUT, status, i); + STATUS_TO_TEXT(CMDTIMEOUT, status, i); + STATUS_TO_TEXT(RXOVERFLOW, status, i); + STATUS_TO_TEXT(TXUNDERRUN, status, i); + STATUS_TO_TEXT(RXRDY, status, i); + STATUS_TO_TEXT(TXRQ, status, i); + STATUS_TO_TEXT(ILL_ACCESS, status, i); + printk("\n"); +} + +#else +#define pr_debug_status(s) do { } while (0) +#endif + +static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + + if (enable) { + host->sdio_irq_enabled = 1; + sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001); + sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, + (TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ)); + } else { + sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, TMIO_SDIO_MASK_ALL); + sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000); + host->sdio_irq_enabled = 0; + } +} + +static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock) +{ + u32 clk = 0, clock; + + if (new_clock) { + for (clock = host->mmc->f_min, clk = 0x80000080; + new_clock >= (clock<<1); clk >>= 1) + clock <<= 1; + clk |= 0x100; + } + + if (host->set_clk_div) + host->set_clk_div(host->pdev, (clk>>22) & 1); + + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff); +} + +static void tmio_mmc_clk_stop(struct tmio_mmc_host *host) +{ + struct tmio_mmc_data *pdata = host->pdata; + + /* + * Testing on sh-mobile showed that SDIO IRQs are unmasked when + * CTL_CLK_AND_WAIT_CTL gets written, so we have to disable the + * device IRQ here and restore the SDIO IRQ mask before + * re-enabling the device IRQ. + */ + if (pdata->flags & TMIO_MMC_SDIO_IRQ) + disable_irq(host->irq); + sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000); + msleep(10); + if (pdata->flags & TMIO_MMC_SDIO_IRQ) { + tmio_mmc_enable_sdio_irq(host->mmc, host->sdio_irq_enabled); + enable_irq(host->irq); + } + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 & + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); + msleep(10); +} + +static void tmio_mmc_clk_start(struct tmio_mmc_host *host) +{ + struct tmio_mmc_data *pdata = host->pdata; + + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 | + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); + msleep(10); + /* see comment in tmio_mmc_clk_stop above */ + if (pdata->flags & TMIO_MMC_SDIO_IRQ) + disable_irq(host->irq); + sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100); + msleep(10); + if (pdata->flags & TMIO_MMC_SDIO_IRQ) { + tmio_mmc_enable_sdio_irq(host->mmc, host->sdio_irq_enabled); + enable_irq(host->irq); + } +} + +static void tmio_mmc_reset(struct tmio_mmc_host *host) +{ + /* FIXME - should we set stop clock reg here */ + sd_ctrl_write16(host, CTL_RESET_SD, 0x0000); + sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000); + msleep(10); + sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); + sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001); + msleep(10); +} + +static void tmio_mmc_reset_work(struct work_struct *work) +{ + struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host, + delayed_reset_work.work); + struct mmc_request *mrq; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + mrq = host->mrq; + + /* request already finished */ + if (!mrq + || time_is_after_jiffies(host->last_req_ts + + msecs_to_jiffies(2000))) { + spin_unlock_irqrestore(&host->lock, flags); + return; + } + + dev_warn(&host->pdev->dev, + "timeout waiting for hardware interrupt (CMD%u)\n", + mrq->cmd->opcode); + + if (host->data) + host->data->error = -ETIMEDOUT; + else if (host->cmd) + host->cmd->error = -ETIMEDOUT; + else + mrq->cmd->error = -ETIMEDOUT; + + host->cmd = NULL; + host->data = NULL; + host->mrq = NULL; + host->force_pio = false; + + spin_unlock_irqrestore(&host->lock, flags); + + tmio_mmc_reset(host); + + mmc_request_done(host->mmc, mrq); +} + +static void tmio_mmc_finish_request(struct tmio_mmc_host *host) +{ + struct mmc_request *mrq = host->mrq; + + if (!mrq) + return; + + host->mrq = NULL; + host->cmd = NULL; + host->data = NULL; + host->force_pio = false; + + cancel_delayed_work(&host->delayed_reset_work); + + mmc_request_done(host->mmc, mrq); +} + +/* These are the bitmasks the tmio chip requires to implement the MMC response + * types. Note that R1 and R6 are the same in this scheme. */ +#define APP_CMD 0x0040 +#define RESP_NONE 0x0300 +#define RESP_R1 0x0400 +#define RESP_R1B 0x0500 +#define RESP_R2 0x0600 +#define RESP_R3 0x0700 +#define DATA_PRESENT 0x0800 +#define TRANSFER_READ 0x1000 +#define TRANSFER_MULTI 0x2000 +#define SECURITY_CMD 0x4000 + +static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd) +{ + struct mmc_data *data = host->data; + int c = cmd->opcode; + + /* Command 12 is handled by hardware */ + if (cmd->opcode == 12 && !cmd->arg) { + sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x001); + return 0; + } + + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: c |= RESP_NONE; break; + case MMC_RSP_R1: c |= RESP_R1; break; + case MMC_RSP_R1B: c |= RESP_R1B; break; + case MMC_RSP_R2: c |= RESP_R2; break; + case MMC_RSP_R3: c |= RESP_R3; break; + default: + pr_debug("Unknown response type %d\n", mmc_resp_type(cmd)); + return -EINVAL; + } + + host->cmd = cmd; + +/* FIXME - this seems to be ok commented out but the spec suggest this bit + * should be set when issuing app commands. + * if(cmd->flags & MMC_FLAG_ACMD) + * c |= APP_CMD; + */ + if (data) { + c |= DATA_PRESENT; + if (data->blocks > 1) { + sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x100); + c |= TRANSFER_MULTI; + } + if (data->flags & MMC_DATA_READ) + c |= TRANSFER_READ; + } + + tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_CMD); + + /* Fire off the command */ + sd_ctrl_write32(host, CTL_ARG_REG, cmd->arg); + sd_ctrl_write16(host, CTL_SD_CMD, c); + + return 0; +} + +/* + * This chip always returns (at least?) as much data as you ask for. + * I'm unsure what happens if you ask for less than a block. This should be + * looked into to ensure that a funny length read doesnt hose the controller. + */ +static void tmio_mmc_pio_irq(struct tmio_mmc_host *host) +{ + struct mmc_data *data = host->data; + void *sg_virt; + unsigned short *buf; + unsigned int count; + unsigned long flags; + + if ((host->chan_tx || host->chan_rx) && !host->force_pio) { + pr_err("PIO IRQ in DMA mode!\n"); + return; + } else if (!data) { + pr_debug("Spurious PIO IRQ\n"); + return; + } + + sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags); + buf = (unsigned short *)(sg_virt + host->sg_off); + + count = host->sg_ptr->length - host->sg_off; + if (count > data->blksz) + count = data->blksz; + + pr_debug("count: %08x offset: %08x flags %08x\n", + count, host->sg_off, data->flags); + + /* Transfer the data */ + if (data->flags & MMC_DATA_READ) + sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); + else + sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); + + host->sg_off += count; + + tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt); + + if (host->sg_off == host->sg_ptr->length) + tmio_mmc_next_sg(host); + + return; +} + +static void tmio_mmc_check_bounce_buffer(struct tmio_mmc_host *host) +{ + if (host->sg_ptr == &host->bounce_sg) { + unsigned long flags; + void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags); + memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length); + tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr); + } +} + +/* needs to be called with host->lock held */ +void tmio_mmc_do_data_irq(struct tmio_mmc_host *host) +{ + struct mmc_data *data = host->data; + struct mmc_command *stop; + + host->data = NULL; + + if (!data) { + dev_warn(&host->pdev->dev, "Spurious data end IRQ\n"); + return; + } + stop = data->stop; + + /* FIXME - return correct transfer count on errors */ + if (!data->error) + data->bytes_xfered = data->blocks * data->blksz; + else + data->bytes_xfered = 0; + + pr_debug("Completed data request\n"); + + /* + * FIXME: other drivers allow an optional stop command of any given type + * which we dont do, as the chip can auto generate them. + * Perhaps we can be smarter about when to use auto CMD12 and + * only issue the auto request when we know this is the desired + * stop command, allowing fallback to the stop command the + * upper layers expect. For now, we do what works. + */ + + if (data->flags & MMC_DATA_READ) { + if (host->chan_rx && !host->force_pio) + tmio_mmc_check_bounce_buffer(host); + dev_dbg(&host->pdev->dev, "Complete Rx request %p\n", + host->mrq); + } else { + dev_dbg(&host->pdev->dev, "Complete Tx request %p\n", + host->mrq); + } + + if (stop) { + if (stop->opcode == 12 && !stop->arg) + sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0x000); + else + BUG(); + } + + tmio_mmc_finish_request(host); +} + +static void tmio_mmc_data_irq(struct tmio_mmc_host *host) +{ + struct mmc_data *data; + spin_lock(&host->lock); + data = host->data; + + if (!data) + goto out; + + if (host->chan_tx && (data->flags & MMC_DATA_WRITE) && !host->force_pio) { + /* + * Has all data been written out yet? Testing on SuperH showed, + * that in most cases the first interrupt comes already with the + * BUSY status bit clear, but on some operations, like mount or + * in the beginning of a write / sync / umount, there is one + * DATAEND interrupt with the BUSY bit set, in this cases + * waiting for one more interrupt fixes the problem. + */ + if (!(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_CMD_BUSY)) { + tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND); + tasklet_schedule(&host->dma_complete); + } + } else if (host->chan_rx && (data->flags & MMC_DATA_READ) && !host->force_pio) { + tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND); + tasklet_schedule(&host->dma_complete); + } else { + tmio_mmc_do_data_irq(host); + tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP); + } +out: + spin_unlock(&host->lock); +} + +static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, + unsigned int stat) +{ + struct mmc_command *cmd = host->cmd; + int i, addr; + + spin_lock(&host->lock); + + if (!host->cmd) { + pr_debug("Spurious CMD irq\n"); + goto out; + } + + host->cmd = NULL; + + /* This controller is sicker than the PXA one. Not only do we need to + * drop the top 8 bits of the first response word, we also need to + * modify the order of the response for short response command types. + */ + + for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4) + cmd->resp[i] = sd_ctrl_read32(host, addr); + + if (cmd->flags & MMC_RSP_136) { + cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24); + cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24); + cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24); + cmd->resp[3] <<= 8; + } else if (cmd->flags & MMC_RSP_R3) { + cmd->resp[0] = cmd->resp[3]; + } + + if (stat & TMIO_STAT_CMDTIMEOUT) + cmd->error = -ETIMEDOUT; + else if (stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC) + cmd->error = -EILSEQ; + + /* If there is data to handle we enable data IRQs here, and + * we will ultimatley finish the request in the data_end handler. + * If theres no data or we encountered an error, finish now. + */ + if (host->data && !cmd->error) { + if (host->data->flags & MMC_DATA_READ) { + if (host->force_pio || !host->chan_rx) + tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP); + else + tasklet_schedule(&host->dma_issue); + } else { + if (host->force_pio || !host->chan_tx) + tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP); + else + tasklet_schedule(&host->dma_issue); + } + } else { + tmio_mmc_finish_request(host); + } + +out: + spin_unlock(&host->lock); +} + +static irqreturn_t tmio_mmc_irq(int irq, void *devid) +{ + struct tmio_mmc_host *host = devid; + struct tmio_mmc_data *pdata = host->pdata; + unsigned int ireg, irq_mask, status; + unsigned int sdio_ireg, sdio_irq_mask, sdio_status; + + pr_debug("MMC IRQ begin\n"); + + status = sd_ctrl_read32(host, CTL_STATUS); + irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK); + ireg = status & TMIO_MASK_IRQ & ~irq_mask; + + sdio_ireg = 0; + if (!ireg && pdata->flags & TMIO_MMC_SDIO_IRQ) { + sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS); + sdio_irq_mask = sd_ctrl_read16(host, CTL_SDIO_IRQ_MASK); + sdio_ireg = sdio_status & TMIO_SDIO_MASK_ALL & ~sdio_irq_mask; + + sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status & ~TMIO_SDIO_MASK_ALL); + + if (sdio_ireg && !host->sdio_irq_enabled) { + pr_warning("tmio_mmc: Spurious SDIO IRQ, disabling! 0x%04x 0x%04x 0x%04x\n", + sdio_status, sdio_irq_mask, sdio_ireg); + tmio_mmc_enable_sdio_irq(host->mmc, 0); + goto out; + } + + if (host->mmc->caps & MMC_CAP_SDIO_IRQ && + sdio_ireg & TMIO_SDIO_STAT_IOIRQ) + mmc_signal_sdio_irq(host->mmc); + + if (sdio_ireg) + goto out; + } + + pr_debug_status(status); + pr_debug_status(ireg); + + if (!ireg) { + tmio_mmc_disable_mmc_irqs(host, status & ~irq_mask); + + pr_warning("tmio_mmc: Spurious irq, disabling! " + "0x%08x 0x%08x 0x%08x\n", status, irq_mask, ireg); + pr_debug_status(status); + + goto out; + } + + while (ireg) { + /* Card insert / remove attempts */ + if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) { + tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT | + TMIO_STAT_CARD_REMOVE); + mmc_detect_change(host->mmc, msecs_to_jiffies(100)); + } + + /* CRC and other errors */ +/* if (ireg & TMIO_STAT_ERR_IRQ) + * handled |= tmio_error_irq(host, irq, stat); + */ + + /* Command completion */ + if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) { + tmio_mmc_ack_mmc_irqs(host, + TMIO_STAT_CMDRESPEND | + TMIO_STAT_CMDTIMEOUT); + tmio_mmc_cmd_irq(host, status); + } + + /* Data transfer */ + if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) { + tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ); + tmio_mmc_pio_irq(host); + } + + /* Data transfer completion */ + if (ireg & TMIO_STAT_DATAEND) { + tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND); + tmio_mmc_data_irq(host); + } + + /* Check status - keep going until we've handled it all */ + status = sd_ctrl_read32(host, CTL_STATUS); + irq_mask = sd_ctrl_read32(host, CTL_IRQ_MASK); + ireg = status & TMIO_MASK_IRQ & ~irq_mask; + + pr_debug("Status at end of loop: %08x\n", status); + pr_debug_status(status); + } + pr_debug("MMC IRQ end\n"); + +out: + return IRQ_HANDLED; +} + +static int tmio_mmc_start_data(struct tmio_mmc_host *host, + struct mmc_data *data) +{ + struct tmio_mmc_data *pdata = host->pdata; + + pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n", + data->blksz, data->blocks); + + /* Some hardware cannot perform 2 byte requests in 4 bit mode */ + if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) { + int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES; + + if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) { + pr_err("%s: %d byte block unsupported in 4 bit mode\n", + mmc_hostname(host->mmc), data->blksz); + return -EINVAL; + } + } + + tmio_mmc_init_sg(host, data); + host->data = data; + + /* Set transfer length / blocksize */ + sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz); + sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks); + + tmio_mmc_start_dma(host, data); + + return 0; +} + +/* Process requests from the MMC layer */ +static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + int ret; + + if (host->mrq) + pr_debug("request not null\n"); + + host->last_req_ts = jiffies; + wmb(); + host->mrq = mrq; + + if (mrq->data) { + ret = tmio_mmc_start_data(host, mrq->data); + if (ret) + goto fail; + } + + ret = tmio_mmc_start_command(host, mrq->cmd); + if (!ret) { + schedule_delayed_work(&host->delayed_reset_work, + msecs_to_jiffies(2000)); + return; + } + +fail: + host->mrq = NULL; + host->force_pio = false; + mrq->cmd->error = ret; + mmc_request_done(mmc, mrq); +} + +/* Set MMC clock / power. + * Note: This controller uses a simple divider scheme therefore it cannot + * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as + * MMC wont run that fast, it has to be clocked at 12MHz which is the next + * slowest setting. + */ +static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + + if (ios->clock) + tmio_mmc_set_clock(host, ios->clock); + + /* Power sequence - OFF -> ON -> UP */ + switch (ios->power_mode) { + case MMC_POWER_OFF: /* power down SD bus */ + if (host->set_pwr) + host->set_pwr(host->pdev, 0); + tmio_mmc_clk_stop(host); + break; + case MMC_POWER_ON: /* power up SD bus */ + if (host->set_pwr) + host->set_pwr(host->pdev, 1); + break; + case MMC_POWER_UP: /* start bus clock */ + tmio_mmc_clk_start(host); + break; + } + + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x80e0); + break; + case MMC_BUS_WIDTH_4: + sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, 0x00e0); + break; + } + + /* Let things settle. delay taken from winCE driver */ + udelay(140); +} + +static int tmio_mmc_get_ro(struct mmc_host *mmc) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + struct tmio_mmc_data *pdata = host->pdata; + + return ((pdata->flags & TMIO_MMC_WRPROTECT_DISABLE) || + !(sd_ctrl_read32(host, CTL_STATUS) & TMIO_STAT_WRPROTECT)); +} + +static int tmio_mmc_get_cd(struct mmc_host *mmc) +{ + struct tmio_mmc_host *host = mmc_priv(mmc); + struct tmio_mmc_data *pdata = host->pdata; + + if (!pdata->get_cd) + return -ENOSYS; + else + return pdata->get_cd(host->pdev); +} + +static const struct mmc_host_ops tmio_mmc_ops = { + .request = tmio_mmc_request, + .set_ios = tmio_mmc_set_ios, + .get_ro = tmio_mmc_get_ro, + .get_cd = tmio_mmc_get_cd, + .enable_sdio_irq = tmio_mmc_enable_sdio_irq, +}; + +int __devinit tmio_mmc_host_probe(struct tmio_mmc_host **host, + struct platform_device *pdev, + struct tmio_mmc_data *pdata) +{ + struct tmio_mmc_host *_host; + struct mmc_host *mmc; + struct resource *res_ctl; + int ret; + u32 irq_mask = TMIO_MASK_CMD; + + res_ctl = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_ctl) + return -EINVAL; + + mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev); + if (!mmc) + return -ENOMEM; + + _host = mmc_priv(mmc); + _host->pdata = pdata; + _host->mmc = mmc; + _host->pdev = pdev; + platform_set_drvdata(pdev, mmc); + + _host->set_pwr = pdata->set_pwr; + _host->set_clk_div = pdata->set_clk_div; + + /* SD control register space size is 0x200, 0x400 for bus_shift=1 */ + _host->bus_shift = resource_size(res_ctl) >> 10; + + _host->ctl = ioremap(res_ctl->start, resource_size(res_ctl)); + if (!_host->ctl) { + ret = -ENOMEM; + goto host_free; + } + + mmc->ops = &tmio_mmc_ops; + mmc->caps = MMC_CAP_4_BIT_DATA | pdata->capabilities; + mmc->f_max = pdata->hclk; + mmc->f_min = mmc->f_max / 512; + mmc->max_segs = 32; + mmc->max_blk_size = 512; + mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) * + mmc->max_segs; + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_req_size; + if (pdata->ocr_mask) + mmc->ocr_avail = pdata->ocr_mask; + else + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + + tmio_mmc_clk_stop(_host); + tmio_mmc_reset(_host); + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + goto unmap_ctl; + + _host->irq = ret; + + tmio_mmc_disable_mmc_irqs(_host, TMIO_MASK_ALL); + if (pdata->flags & TMIO_MMC_SDIO_IRQ) + tmio_mmc_enable_sdio_irq(mmc, 0); + + ret = request_irq(_host->irq, tmio_mmc_irq, IRQF_DISABLED | + IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), _host); + if (ret) + goto unmap_ctl; + + spin_lock_init(&_host->lock); + + /* Init delayed work for request timeouts */ + INIT_DELAYED_WORK(&_host->delayed_reset_work, tmio_mmc_reset_work); + + /* See if we also get DMA */ + tmio_mmc_request_dma(_host, pdata); + + mmc_add_host(mmc); + + /* Unmask the IRQs we want to know about */ + if (!_host->chan_rx) + irq_mask |= TMIO_MASK_READOP; + if (!_host->chan_tx) + irq_mask |= TMIO_MASK_WRITEOP; + + tmio_mmc_enable_mmc_irqs(_host, irq_mask); + + *host = _host; + + return 0; + +unmap_ctl: + iounmap(_host->ctl); +host_free: + mmc_free_host(mmc); + + return ret; +} +EXPORT_SYMBOL(tmio_mmc_host_probe); + +void tmio_mmc_host_remove(struct tmio_mmc_host *host) +{ + mmc_remove_host(host->mmc); + cancel_delayed_work_sync(&host->delayed_reset_work); + tmio_mmc_release_dma(host); + free_irq(host->irq, host); + iounmap(host->ctl); + mmc_free_host(host->mmc); +} +EXPORT_SYMBOL(tmio_mmc_host_remove); + +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-70-g09d2 From 4fbc5ece430bc2890edc90a112c742844130f943 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 9 Mar 2011 13:44:29 +0100 Subject: sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD The CONFIG_MFD_SH_MOBILE_SDHI Kconfig symbol is going to disappear soon, switch ecovec to using CONFIG_MMC_TMIO(_MODULE). Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Chris Ball --- arch/sh/boards/mach-ecovec24/setup.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index e44480ce2ea..baff9ae1a80 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -464,7 +464,7 @@ static struct i2c_board_info ts_i2c_clients = { .irq = IRQ0, }; -#ifdef CONFIG_MFD_SH_MOBILE_SDHI +#if defined(CONFIG_MMC_TMIO) || defined(CONFIG_MMC_TMIO_MODULE) /* SDHI0 */ static void sdhi0_set_pwr(struct platform_device *pdev, int state) { @@ -880,7 +880,7 @@ static struct platform_device *ecovec_devices[] __initdata = { &ceu0_device, &ceu1_device, &keysc_device, -#ifdef CONFIG_MFD_SH_MOBILE_SDHI +#if defined(CONFIG_MMC_TMIO) || defined(CONFIG_MMC_TMIO_MODULE) &sdhi0_device, #if !defined(CONFIG_MMC_SH_MMCIF) &sdhi1_device, @@ -1162,7 +1162,7 @@ static int __init arch_setup(void) gpio_direction_input(GPIO_PTR5); gpio_direction_input(GPIO_PTR6); -#ifdef CONFIG_MFD_SH_MOBILE_SDHI +#if defined(CONFIG_MMC_TMIO) || defined(CONFIG_MMC_TMIO_MODULE) /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */ gpio_request(GPIO_FN_SDHI0CD, NULL); gpio_request(GPIO_FN_SDHI0WP, NULL); -- cgit v1.2.3-70-g09d2 From 42051e8a7bce76ebd3cd201704ee2427120636e1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 14 Mar 2011 09:52:33 +0100 Subject: mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver On sh-mobile platforms the SDHI driver was using the tmio_mmc SD/SDIO MFD cell driver. Now that the tmio_mmc driver has been split into a core and a separate MFD glue, we can support SDHI natively without the need to emulate an MFD controller. This also allows to support systems with an on-SoC SDHI controller and a separate MFD with a TMIO core. Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Chris Ball --- drivers/mfd/Kconfig | 14 --- drivers/mfd/Makefile | 1 - drivers/mfd/sh_mobile_sdhi.c | 200 ------------------------------------- drivers/mmc/host/Kconfig | 9 +- drivers/mmc/host/Makefile | 7 +- drivers/mmc/host/sh_mobile_sdhi.c | 171 +++++++++++++++++++++++++++++++ drivers/mmc/host/tmio_mmc.h | 2 +- include/linux/mfd/sh_mobile_sdhi.h | 19 +--- include/linux/mmc/sh_mobile_sdhi.h | 16 +++ 9 files changed, 206 insertions(+), 233 deletions(-) delete mode 100644 drivers/mfd/sh_mobile_sdhi.c create mode 100644 drivers/mmc/host/sh_mobile_sdhi.c create mode 100644 include/linux/mmc/sh_mobile_sdhi.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index a9a1af49281..38cb1d4d684 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -60,15 +60,6 @@ config MFD_ASIC3 This driver supports the ASIC3 multifunction chip found on many PDAs (mainly iPAQ and HTC based ones) -config MFD_SH_MOBILE_SDHI - bool "Support for SuperH Mobile SDHI" - depends on SUPERH || ARCH_SHMOBILE - select MFD_CORE - select TMIO_MMC_DMA - ---help--- - This driver supports the SDHI hardware block found in many - SuperH Mobile SoCs. - config MFD_DAVINCI_VOICECODEC tristate select MFD_CORE @@ -265,11 +256,6 @@ config MFD_TMIO bool default n -config TMIO_MMC_DMA - bool - select DMA_ENGINE - select DMADEVICES - config MFD_T7L66XB bool "Support Toshiba T7L66XB" depends on ARM && HAVE_CLK diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 47f5709f382..ad6c4432187 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -6,7 +6,6 @@ obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o obj-$(CONFIG_MFD_SM501) += sm501.o obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o -obj-$(CONFIG_MFD_SH_MOBILE_SDHI) += sh_mobile_sdhi.o obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o diff --git a/drivers/mfd/sh_mobile_sdhi.c b/drivers/mfd/sh_mobile_sdhi.c deleted file mode 100644 index 53a63024bf1..00000000000 --- a/drivers/mfd/sh_mobile_sdhi.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - * SuperH Mobile SDHI - * - * Copyright (C) 2009 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Based on "Compaq ASIC3 support": - * - * Copyright 2001 Compaq Computer Corporation. - * Copyright 2004-2005 Phil Blundell - * Copyright 2007-2008 OpenedHand Ltd. - * - * Authors: Phil Blundell , - * Samuel Ortiz - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct sh_mobile_sdhi { - struct clk *clk; - struct tmio_mmc_data mmc_data; - struct mfd_cell cell_mmc; - struct sh_dmae_slave param_tx; - struct sh_dmae_slave param_rx; - struct tmio_mmc_dma dma_priv; -}; - -static struct resource sh_mobile_sdhi_resources[] = { - { - .start = 0x000, - .end = 0x1ff, - .flags = IORESOURCE_MEM, - }, - { - .start = 0, - .end = 0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mfd_cell sh_mobile_sdhi_cell = { - .name = "tmio-mmc", - .num_resources = ARRAY_SIZE(sh_mobile_sdhi_resources), - .resources = sh_mobile_sdhi_resources, -}; - -static void sh_mobile_sdhi_set_pwr(struct platform_device *tmio, int state) -{ - struct platform_device *pdev = to_platform_device(tmio->dev.parent); - struct sh_mobile_sdhi_info *p = pdev->dev.platform_data; - - if (p && p->set_pwr) - p->set_pwr(pdev, state); -} - -static int sh_mobile_sdhi_get_cd(struct platform_device *tmio) -{ - struct platform_device *pdev = to_platform_device(tmio->dev.parent); - struct sh_mobile_sdhi_info *p = pdev->dev.platform_data; - - if (p && p->get_cd) - return p->get_cd(pdev); - else - return -ENOSYS; -} - -static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) -{ - struct sh_mobile_sdhi *priv; - struct tmio_mmc_data *mmc_data; - struct sh_mobile_sdhi_info *p = pdev->dev.platform_data; - struct resource *mem; - char clk_name[8]; - int ret, irq; - - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) - dev_err(&pdev->dev, "missing MEM resource\n"); - - irq = platform_get_irq(pdev, 0); - if (irq < 0) - dev_err(&pdev->dev, "missing IRQ resource\n"); - - if (!mem || (irq < 0)) - return -EINVAL; - - priv = kzalloc(sizeof(struct sh_mobile_sdhi), GFP_KERNEL); - if (priv == NULL) { - dev_err(&pdev->dev, "kzalloc failed\n"); - return -ENOMEM; - } - - mmc_data = &priv->mmc_data; - - snprintf(clk_name, sizeof(clk_name), "sdhi%d", pdev->id); - priv->clk = clk_get(&pdev->dev, clk_name); - if (IS_ERR(priv->clk)) { - dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name); - ret = PTR_ERR(priv->clk); - kfree(priv); - return ret; - } - - clk_enable(priv->clk); - - mmc_data->hclk = clk_get_rate(priv->clk); - mmc_data->set_pwr = sh_mobile_sdhi_set_pwr; - mmc_data->get_cd = sh_mobile_sdhi_get_cd; - mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED; - if (p) { - mmc_data->flags = p->tmio_flags; - mmc_data->ocr_mask = p->tmio_ocr_mask; - mmc_data->capabilities |= p->tmio_caps; - } - - /* - * All SDHI blocks support 2-byte and larger block sizes in 4-bit - * bus width mode. - */ - mmc_data->flags |= TMIO_MMC_BLKSZ_2BYTES; - - /* - * All SDHI blocks support SDIO IRQ signalling. - */ - mmc_data->flags |= TMIO_MMC_SDIO_IRQ; - - if (p && p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) { - priv->param_tx.slave_id = p->dma_slave_tx; - priv->param_rx.slave_id = p->dma_slave_rx; - priv->dma_priv.chan_priv_tx = &priv->param_tx; - priv->dma_priv.chan_priv_rx = &priv->param_rx; - priv->dma_priv.alignment_shift = 1; /* 2-byte alignment */ - mmc_data->dma = &priv->dma_priv; - } - - memcpy(&priv->cell_mmc, &sh_mobile_sdhi_cell, sizeof(priv->cell_mmc)); - priv->cell_mmc.mfd_data = mmc_data; - - platform_set_drvdata(pdev, priv); - - ret = mfd_add_devices(&pdev->dev, pdev->id, - &priv->cell_mmc, 1, mem, irq); - if (ret) { - clk_disable(priv->clk); - clk_put(priv->clk); - kfree(priv); - } - - return ret; -} - -static int sh_mobile_sdhi_remove(struct platform_device *pdev) -{ - struct sh_mobile_sdhi *priv = platform_get_drvdata(pdev); - - mfd_remove_devices(&pdev->dev); - clk_disable(priv->clk); - clk_put(priv->clk); - kfree(priv); - - return 0; -} - -static struct platform_driver sh_mobile_sdhi_driver = { - .driver = { - .name = "sh_mobile_sdhi", - .owner = THIS_MODULE, - }, - .probe = sh_mobile_sdhi_probe, - .remove = __devexit_p(sh_mobile_sdhi_remove), -}; - -static int __init sh_mobile_sdhi_init(void) -{ - return platform_driver_register(&sh_mobile_sdhi_driver); -} - -static void __exit sh_mobile_sdhi_exit(void) -{ - platform_driver_unregister(&sh_mobile_sdhi_driver); -} - -module_init(sh_mobile_sdhi_init); -module_exit(sh_mobile_sdhi_exit); - -MODULE_DESCRIPTION("SuperH Mobile SDHI driver"); -MODULE_AUTHOR("Magnus Damm"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 4d16166386c..0b03cee9145 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -444,12 +444,19 @@ config MMC_TMIO_CORE config MMC_TMIO tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support" - depends on MFD_TMIO || MFD_ASIC3 || MFD_SH_MOBILE_SDHI + depends on MFD_TMIO || MFD_ASIC3 select MMC_TMIO_CORE help This provides support for the SD/MMC cell found in TC6393XB, T7L66XB and also HTC ASIC3 +config MMC_SDHI + tristate "SH-Mobile SDHI SD/SDIO controller support" + select MMC_TMIO_CORE + help + This provides support for the SDHI SD/SDIO controller found in + SuperH and ARM SH-Mobile SoCs + config MMC_CB710 tristate "ENE CB710 MMC/SD Interface support" depends on PCI diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 79c42dd23c0..4f1df0aae57 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -31,8 +31,11 @@ obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o obj-$(CONFIG_MMC_TMIO_CORE) += tmio_mmc_core.o tmio_mmc_core-y := tmio_mmc_pio.o -tmio_mmc_core-$(CONFIG_TMIO_MMC_DMA) += tmio_mmc_dma.o -obj-$(CONFIG_MMC_CB710) += cb710-mmc.o +ifneq ($(CONFIG_MMC_SDHI),n) +tmio_mmc_core-y += tmio_mmc_dma.o +endif +obj-$(CONFIG_MMC_SDHI) += sh_mobile_sdhi.o +obj-$(CONFIG_MMC_CB710) += cb710-mmc.o obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o obj-$(CONFIG_SDH_BFIN) += bfin_sdh.o obj-$(CONFIG_MMC_DW) += dw_mmc.o diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c new file mode 100644 index 00000000000..cc701236d16 --- /dev/null +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -0,0 +1,171 @@ +/* + * SuperH Mobile SDHI + * + * Copyright (C) 2009 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on "Compaq ASIC3 support": + * + * Copyright 2001 Compaq Computer Corporation. + * Copyright 2004-2005 Phil Blundell + * Copyright 2007-2008 OpenedHand Ltd. + * + * Authors: Phil Blundell , + * Samuel Ortiz + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "tmio_mmc.h" + +struct sh_mobile_sdhi { + struct clk *clk; + struct tmio_mmc_data mmc_data; + struct sh_dmae_slave param_tx; + struct sh_dmae_slave param_rx; + struct tmio_mmc_dma dma_priv; +}; + +static void sh_mobile_sdhi_set_pwr(struct platform_device *pdev, int state) +{ + struct sh_mobile_sdhi_info *p = pdev->dev.platform_data; + + if (p && p->set_pwr) + p->set_pwr(pdev, state); +} + +static int sh_mobile_sdhi_get_cd(struct platform_device *pdev) +{ + struct sh_mobile_sdhi_info *p = pdev->dev.platform_data; + + if (p && p->get_cd) + return p->get_cd(pdev); + else + return -ENOSYS; +} + +static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) +{ + struct sh_mobile_sdhi *priv; + struct tmio_mmc_data *mmc_data; + struct sh_mobile_sdhi_info *p = pdev->dev.platform_data; + struct tmio_mmc_host *host; + char clk_name[8]; + int ret; + + priv = kzalloc(sizeof(struct sh_mobile_sdhi), GFP_KERNEL); + if (priv == NULL) { + dev_err(&pdev->dev, "kzalloc failed\n"); + return -ENOMEM; + } + + mmc_data = &priv->mmc_data; + + snprintf(clk_name, sizeof(clk_name), "sdhi%d", pdev->id); + priv->clk = clk_get(&pdev->dev, clk_name); + if (IS_ERR(priv->clk)) { + dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name); + ret = PTR_ERR(priv->clk); + goto eclkget; + } + + clk_enable(priv->clk); + + mmc_data->hclk = clk_get_rate(priv->clk); + mmc_data->set_pwr = sh_mobile_sdhi_set_pwr; + mmc_data->get_cd = sh_mobile_sdhi_get_cd; + mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED; + if (p) { + mmc_data->flags = p->tmio_flags; + mmc_data->ocr_mask = p->tmio_ocr_mask; + mmc_data->capabilities |= p->tmio_caps; + + if (p->dma_slave_tx >= 0 && p->dma_slave_rx >= 0) { + priv->param_tx.slave_id = p->dma_slave_tx; + priv->param_rx.slave_id = p->dma_slave_rx; + priv->dma_priv.chan_priv_tx = &priv->param_tx; + priv->dma_priv.chan_priv_rx = &priv->param_rx; + priv->dma_priv.alignment_shift = 1; /* 2-byte alignment */ + mmc_data->dma = &priv->dma_priv; + } + } + + /* + * All SDHI blocks support 2-byte and larger block sizes in 4-bit + * bus width mode. + */ + mmc_data->flags |= TMIO_MMC_BLKSZ_2BYTES; + + /* + * All SDHI blocks support SDIO IRQ signalling. + */ + mmc_data->flags |= TMIO_MMC_SDIO_IRQ; + + ret = tmio_mmc_host_probe(&host, pdev, mmc_data); + if (ret < 0) + goto eprobe; + + pr_info("%s at 0x%08lx irq %d\n", mmc_hostname(host->mmc), + (unsigned long)host->ctl, host->irq); + + return ret; + +eprobe: + clk_disable(priv->clk); + clk_put(priv->clk); +eclkget: + kfree(priv); + return ret; +} + +static int sh_mobile_sdhi_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct tmio_mmc_host *host = mmc_priv(mmc); + struct sh_mobile_sdhi *priv = container_of(host->pdata, struct sh_mobile_sdhi, mmc_data); + + tmio_mmc_host_remove(host); + clk_disable(priv->clk); + clk_put(priv->clk); + kfree(priv); + + return 0; +} + +static struct platform_driver sh_mobile_sdhi_driver = { + .driver = { + .name = "sh_mobile_sdhi", + .owner = THIS_MODULE, + }, + .probe = sh_mobile_sdhi_probe, + .remove = __devexit_p(sh_mobile_sdhi_remove), +}; + +static int __init sh_mobile_sdhi_init(void) +{ + return platform_driver_register(&sh_mobile_sdhi_driver); +} + +static void __exit sh_mobile_sdhi_exit(void) +{ + platform_driver_unregister(&sh_mobile_sdhi_driver); +} + +module_init(sh_mobile_sdhi_init); +module_exit(sh_mobile_sdhi_exit); + +MODULE_DESCRIPTION("SuperH Mobile SDHI driver"); +MODULE_AUTHOR("Magnus Damm"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:sh_mobile_sdhi"); diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index 8dedf0a6934..7d79b14d56a 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -120,7 +120,7 @@ static inline void tmio_mmc_kunmap_atomic(struct scatterlist *sg, local_irq_restore(*flags); } -#ifdef CONFIG_TMIO_MMC_DMA +#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) void tmio_mmc_start_dma(struct tmio_mmc_host *host, struct mmc_data *data); void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata); void tmio_mmc_release_dma(struct tmio_mmc_host *host); diff --git a/include/linux/mfd/sh_mobile_sdhi.h b/include/linux/mfd/sh_mobile_sdhi.h index c981b959760..10af7f901eb 100644 --- a/include/linux/mfd/sh_mobile_sdhi.h +++ b/include/linux/mfd/sh_mobile_sdhi.h @@ -1,16 +1,7 @@ -#ifndef __SH_MOBILE_SDHI_H__ -#define __SH_MOBILE_SDHI_H__ +#ifndef MFD_SH_MOBILE_SDHI_H +#define MFD_SH_MOBILE_SDHI_H -#include +/* Compatibility header - will disappear once all platforms are converted */ +#include -struct sh_mobile_sdhi_info { - int dma_slave_tx; - int dma_slave_rx; - unsigned long tmio_flags; - unsigned long tmio_caps; - u32 tmio_ocr_mask; /* available MMC voltages */ - void (*set_pwr)(struct platform_device *pdev, int state); - int (*get_cd)(struct platform_device *pdev); -}; - -#endif /* __SH_MOBILE_SDHI_H__ */ +#endif /* MFD_SH_MOBILE_SDHI_H */ diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h new file mode 100644 index 00000000000..c981b959760 --- /dev/null +++ b/include/linux/mmc/sh_mobile_sdhi.h @@ -0,0 +1,16 @@ +#ifndef __SH_MOBILE_SDHI_H__ +#define __SH_MOBILE_SDHI_H__ + +#include + +struct sh_mobile_sdhi_info { + int dma_slave_tx; + int dma_slave_rx; + unsigned long tmio_flags; + unsigned long tmio_caps; + u32 tmio_ocr_mask; /* available MMC voltages */ + void (*set_pwr)(struct platform_device *pdev, int state); + int (*get_cd)(struct platform_device *pdev); +}; + +#endif /* __SH_MOBILE_SDHI_H__ */ -- cgit v1.2.3-70-g09d2 From 17e75d82518ac3146966b64adc109344fcc80f8a Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 9 Mar 2011 11:27:56 +0100 Subject: ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Chris Ball --- arch/arm/mach-shmobile/board-ap4evb.c | 2 +- arch/arm/mach-shmobile/board-g4evm.c | 2 +- arch/arm/mach-shmobile/board-mackerel.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index a94f29da5d3..9ef8718ea7a 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -24,9 +24,9 @@ #include #include #include -#include #include #include +#include #include #include #include diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index dee3e9231fb..cccdf2dd697 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 49bc0748217..9a4741e98dd 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -32,10 +32,10 @@ #include #include #include -#include #include #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 960b9e7ec651f381f639aafcca483d704b2cc3b0 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 9 Mar 2011 11:29:48 +0100 Subject: sh: convert boards to use linux/mmc/sh_mobile_sdhi.h Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Chris Ball --- arch/sh/boards/mach-ap325rxa/setup.c | 2 +- arch/sh/boards/mach-ecovec24/setup.c | 2 +- arch/sh/boards/mach-kfr2r09/setup.c | 2 +- arch/sh/boards/mach-migor/setup.c | 2 +- arch/sh/boards/mach-se/7724/setup.c | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 3e5fc3bbf3e..ce57b9b6ffe 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -14,8 +14,8 @@ #include #include #include -#include #include +#include #include #include #include diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index baff9ae1a80..f6844157b0d 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -11,9 +11,9 @@ #include #include #include -#include #include #include +#include #include #include #include diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 7504daaa85d..7021b591eeb 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -10,8 +10,8 @@ #include #include #include -#include #include +#include #include #include #include diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 03a7ffe729d..37e64a6a7ce 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -12,8 +12,8 @@ #include #include #include -#include #include +#include #include #include #include diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index c8bcf6a19b5..58cefd3476b 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -14,8 +14,8 @@ #include #include #include -#include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 52c6182a47fa66ad5f2647a831efa99c05b0a54e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 9 Mar 2011 11:33:35 +0100 Subject: mfd: remove now redundant sh_mobile_sdhi.h header Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Acked-by: Samuel Ortiz Signed-off-by: Chris Ball --- include/linux/mfd/sh_mobile_sdhi.h | 7 ------- 1 file changed, 7 deletions(-) delete mode 100644 include/linux/mfd/sh_mobile_sdhi.h diff --git a/include/linux/mfd/sh_mobile_sdhi.h b/include/linux/mfd/sh_mobile_sdhi.h deleted file mode 100644 index 10af7f901eb..00000000000 --- a/include/linux/mfd/sh_mobile_sdhi.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef MFD_SH_MOBILE_SDHI_H -#define MFD_SH_MOBILE_SDHI_H - -/* Compatibility header - will disappear once all platforms are converted */ -#include - -#endif /* MFD_SH_MOBILE_SDHI_H */ -- cgit v1.2.3-70-g09d2 From 69d1fe18e92afb4687605a1ab2ec73fbc3bae344 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 9 Mar 2011 17:28:55 +0100 Subject: mmc: tmio: only access registers above 0xff, if available Not all tmio implementations have registers above oxff. Accessing them on thise platforms is dangerous. In some cases it leads to address wrapping to addresses below 0x100, which corrupts random unrelated registers. Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc_pio.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index a7406e3701c..28e14c7a254 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -209,6 +209,7 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock) static void tmio_mmc_clk_stop(struct tmio_mmc_host *host) { struct tmio_mmc_data *pdata = host->pdata; + struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0); /* * Testing on sh-mobile showed that SDIO IRQs are unmasked when @@ -218,8 +219,11 @@ static void tmio_mmc_clk_stop(struct tmio_mmc_host *host) */ if (pdata->flags & TMIO_MMC_SDIO_IRQ) disable_irq(host->irq); - sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000); - msleep(10); + /* implicit BUG_ON(!res) */ + if (resource_size(res) > 0x100) { + sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000); + msleep(10); + } if (pdata->flags & TMIO_MMC_SDIO_IRQ) { tmio_mmc_enable_sdio_irq(host->mmc, host->sdio_irq_enabled); enable_irq(host->irq); @@ -232,6 +236,7 @@ static void tmio_mmc_clk_stop(struct tmio_mmc_host *host) static void tmio_mmc_clk_start(struct tmio_mmc_host *host) { struct tmio_mmc_data *pdata = host->pdata; + struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0); sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 | sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); @@ -239,8 +244,11 @@ static void tmio_mmc_clk_start(struct tmio_mmc_host *host) /* see comment in tmio_mmc_clk_stop above */ if (pdata->flags & TMIO_MMC_SDIO_IRQ) disable_irq(host->irq); - sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100); - msleep(10); + /* implicit BUG_ON(!res) */ + if (resource_size(res) > 0x100) { + sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100); + msleep(10); + } if (pdata->flags & TMIO_MMC_SDIO_IRQ) { tmio_mmc_enable_sdio_irq(host->mmc, host->sdio_irq_enabled); enable_irq(host->irq); @@ -249,12 +257,17 @@ static void tmio_mmc_clk_start(struct tmio_mmc_host *host) static void tmio_mmc_reset(struct tmio_mmc_host *host) { + struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0); + /* FIXME - should we set stop clock reg here */ sd_ctrl_write16(host, CTL_RESET_SD, 0x0000); - sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000); + /* implicit BUG_ON(!res) */ + if (resource_size(res) > 0x100) + sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000); msleep(10); sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); - sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001); + if (resource_size(res) > 0x100) + sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001); msleep(10); } -- cgit v1.2.3-70-g09d2 From 31d31fe76859653172120b5f8f7440f2a0694de9 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 9 Mar 2011 13:09:27 +0100 Subject: ARM: mach-shmobile: fix SDHI IO address-range SDHI registers occupy only a 0x100 byte large window, not 0x200 byte. Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Chris Ball --- arch/arm/mach-shmobile/board-ap4evb.c | 4 ++-- arch/arm/mach-shmobile/board-g4evm.c | 4 ++-- arch/arm/mach-shmobile/board-mackerel.c | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 9ef8718ea7a..d543ab5526c 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -312,7 +312,7 @@ static struct resource sdhi0_resources[] = { [0] = { .name = "SDHI0", .start = 0xe6850000, - .end = 0xe68501ff, + .end = 0xe68500ff, .flags = IORESOURCE_MEM, }, [1] = { @@ -345,7 +345,7 @@ static struct resource sdhi1_resources[] = { [0] = { .name = "SDHI1", .start = 0xe6860000, - .end = 0xe68601ff, + .end = 0xe68600ff, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index cccdf2dd697..c87a7b7c583 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -205,7 +205,7 @@ static struct resource sdhi0_resources[] = { [0] = { .name = "SDHI0", .start = 0xe6d50000, - .end = 0xe6d501ff, + .end = 0xe6d50nff, .flags = IORESOURCE_MEM, }, [1] = { @@ -232,7 +232,7 @@ static struct resource sdhi1_resources[] = { [0] = { .name = "SDHI1", .start = 0xe6d60000, - .end = 0xe6d601ff, + .end = 0xe6d600ff, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9a4741e98dd..9ed574117e4 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -690,7 +690,7 @@ static struct resource sdhi0_resources[] = { [0] = { .name = "SDHI0", .start = 0xe6850000, - .end = 0xe68501ff, + .end = 0xe68500ff, .flags = IORESOURCE_MEM, }, [1] = { @@ -725,7 +725,7 @@ static struct resource sdhi1_resources[] = { [0] = { .name = "SDHI1", .start = 0xe6860000, - .end = 0xe68601ff, + .end = 0xe68600ff, .flags = IORESOURCE_MEM, }, [1] = { @@ -768,7 +768,7 @@ static struct resource sdhi2_resources[] = { [0] = { .name = "SDHI2", .start = 0xe6870000, - .end = 0xe68701ff, + .end = 0xe68700ff, .flags = IORESOURCE_MEM, }, [1] = { -- cgit v1.2.3-70-g09d2 From d80e9221742235ebfcbe85e3899603ab2b716749 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 9 Mar 2011 13:42:42 +0100 Subject: sh: fix SDHI IO address-range SDHI registers occupy only a 0x100 byte large window, not 0x200 byte. Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Chris Ball --- arch/sh/boards/mach-ap325rxa/setup.c | 4 ++-- arch/sh/boards/mach-ecovec24/setup.c | 4 ++-- arch/sh/boards/mach-kfr2r09/setup.c | 2 +- arch/sh/boards/mach-migor/setup.c | 2 +- arch/sh/boards/mach-se/7724/setup.c | 4 ++-- 5 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index ce57b9b6ffe..636d8318a72 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -423,7 +423,7 @@ static struct resource sdhi0_cn3_resources[] = { [0] = { .name = "SDHI0", .start = 0x04ce0000, - .end = 0x04ce01ff, + .end = 0x04ce00ff, .flags = IORESOURCE_MEM, }, [1] = { @@ -453,7 +453,7 @@ static struct resource sdhi1_cn7_resources[] = { [0] = { .name = "SDHI1", .start = 0x04cf0000, - .end = 0x04cf01ff, + .end = 0x04cf00ff, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index f6844157b0d..ca2d2a3dccb 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -482,7 +482,7 @@ static struct resource sdhi0_resources[] = { [0] = { .name = "SDHI0", .start = 0x04ce0000, - .end = 0x04ce01ff, + .end = 0x04ce00ff, .flags = IORESOURCE_MEM, }, [1] = { @@ -522,7 +522,7 @@ static struct resource sdhi1_resources[] = { [0] = { .name = "SDHI1", .start = 0x04cf0000, - .end = 0x04cf01ff, + .end = 0x04cf00ff, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 7021b591eeb..8b4abbbd147 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -354,7 +354,7 @@ static struct resource kfr2r09_sh_sdhi0_resources[] = { [0] = { .name = "SDHI0", .start = 0x04ce0000, - .end = 0x04ce01ff, + .end = 0x04ce00ff, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 37e64a6a7ce..184fde16913 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -399,7 +399,7 @@ static struct resource sdhi_cn9_resources[] = { [0] = { .name = "SDHI", .start = 0x04ce0000, - .end = 0x04ce01ff, + .end = 0x04ce00ff, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 58cefd3476b..12357671023 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -456,7 +456,7 @@ static struct resource sdhi0_cn7_resources[] = { [0] = { .name = "SDHI0", .start = 0x04ce0000, - .end = 0x04ce01ff, + .end = 0x04ce00ff, .flags = IORESOURCE_MEM, }, [1] = { @@ -488,7 +488,7 @@ static struct resource sdhi1_cn8_resources[] = { [0] = { .name = "SDHI1", .start = 0x04cf0000, - .end = 0x04cf01ff, + .end = 0x04cf00ff, .flags = IORESOURCE_MEM, }, [1] = { -- cgit v1.2.3-70-g09d2 From d9b03421775d5cf8b4d5518a3e80b28cf3f999ce Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 10 Mar 2011 18:43:07 +0100 Subject: mmc: tmio: remove work-around for unmasked SDIO interrupts SDIO IRQs got unmasked on sh-mobile while writing to the CTL_CLK_AND_WAIT_CTL register, because that register at address 0x138 is not implemented on those SoCs and writes to it overwrite the register at address 0x38: CTL_SDIO_IRQ_MASK. Previous patches eliminated access to register above 0xff on sh-mobile, so that this work-around isn't needed anymore. Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc_pio.c | 23 ++--------------------- 1 file changed, 2 insertions(+), 21 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index 28e14c7a254..e1aed255512 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -208,26 +208,14 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock) static void tmio_mmc_clk_stop(struct tmio_mmc_host *host) { - struct tmio_mmc_data *pdata = host->pdata; struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0); - /* - * Testing on sh-mobile showed that SDIO IRQs are unmasked when - * CTL_CLK_AND_WAIT_CTL gets written, so we have to disable the - * device IRQ here and restore the SDIO IRQ mask before - * re-enabling the device IRQ. - */ - if (pdata->flags & TMIO_MMC_SDIO_IRQ) - disable_irq(host->irq); /* implicit BUG_ON(!res) */ if (resource_size(res) > 0x100) { sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000); msleep(10); } - if (pdata->flags & TMIO_MMC_SDIO_IRQ) { - tmio_mmc_enable_sdio_irq(host->mmc, host->sdio_irq_enabled); - enable_irq(host->irq); - } + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~0x0100 & sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); msleep(10); @@ -235,24 +223,17 @@ static void tmio_mmc_clk_stop(struct tmio_mmc_host *host) static void tmio_mmc_clk_start(struct tmio_mmc_host *host) { - struct tmio_mmc_data *pdata = host->pdata; struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0); sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 | sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); msleep(10); - /* see comment in tmio_mmc_clk_stop above */ - if (pdata->flags & TMIO_MMC_SDIO_IRQ) - disable_irq(host->irq); + /* implicit BUG_ON(!res) */ if (resource_size(res) > 0x100) { sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100); msleep(10); } - if (pdata->flags & TMIO_MMC_SDIO_IRQ) { - tmio_mmc_enable_sdio_irq(host->mmc, host->sdio_irq_enabled); - enable_irq(host->irq); - } } static void tmio_mmc_reset(struct tmio_mmc_host *host) -- cgit v1.2.3-70-g09d2 From a7edbe399b40fb82ccd11216fd88d24e428025c5 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 9 Mar 2011 14:38:58 +0100 Subject: mmc: tmio: fix power-mode interpretation The power-mode sequence on MMC is MMC_POWER_OFF -> MMC_POWER_UP -> MMC_POWER_ON and not MMC_POWER_ON -> MMC_POWER_UP, as the driver currently is implying. Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc_pio.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index e1aed255512..69772ab3ca2 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -746,20 +746,20 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (ios->clock) tmio_mmc_set_clock(host, ios->clock); - /* Power sequence - OFF -> ON -> UP */ + /* Power sequence - OFF -> UP -> ON */ switch (ios->power_mode) { case MMC_POWER_OFF: /* power down SD bus */ if (host->set_pwr) host->set_pwr(host->pdev, 0); tmio_mmc_clk_stop(host); break; - case MMC_POWER_ON: /* power up SD bus */ + case MMC_POWER_ON: /* start bus clock */ + tmio_mmc_clk_start(host); + break; + case MMC_POWER_UP: /* power up SD bus */ if (host->set_pwr) host->set_pwr(host->pdev, 1); break; - case MMC_POWER_UP: /* start bus clock */ - tmio_mmc_clk_start(host); - break; } switch (ios->bus_width) { -- cgit v1.2.3-70-g09d2 From 5fd0157901d5a8f497f3d3b95cb4beebf1641d1b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 9 Mar 2011 14:45:44 +0100 Subject: mmc: tmio: support aggressive clock gating Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc_pio.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index 69772ab3ca2..e35e17992e3 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -747,19 +747,18 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) tmio_mmc_set_clock(host, ios->clock); /* Power sequence - OFF -> UP -> ON */ - switch (ios->power_mode) { - case MMC_POWER_OFF: /* power down SD bus */ - if (host->set_pwr) + if (ios->power_mode == MMC_POWER_OFF || !ios->clock) { + /* power down SD bus */ + if (ios->power_mode == MMC_POWER_OFF && host->set_pwr) host->set_pwr(host->pdev, 0); tmio_mmc_clk_stop(host); - break; - case MMC_POWER_ON: /* start bus clock */ - tmio_mmc_clk_start(host); - break; - case MMC_POWER_UP: /* power up SD bus */ + } else if (ios->power_mode == MMC_POWER_UP) { + /* power up SD bus */ if (host->set_pwr) host->set_pwr(host->pdev, 1); - break; + } else { + /* start bus clock */ + tmio_mmc_clk_start(host); } switch (ios->bus_width) { -- cgit v1.2.3-70-g09d2 From cba179aec779b364a683906b99e23014c7652e8e Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 24 Mar 2011 09:48:36 +0100 Subject: mmc: tmio_mmc: Move some defines into a shared header Also add TMIO_BBS. This allows these defines to also be used by zboot. Cc: Guennadi Liakhovetski Signed-off-by: Simon Horman Signed-off-by: Guennadi Liakhovetski Acked-by: Paul Mundt Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc.h | 30 +++----------------- drivers/mmc/host/tmio_mmc_dma.c | 1 + drivers/mmc/host/tmio_mmc_pio.c | 21 +------------- include/linux/mmc/tmio.h | 63 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 69 insertions(+), 46 deletions(-) create mode 100644 include/linux/mmc/tmio.h diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index 7d79b14d56a..099ed49a259 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -17,36 +17,14 @@ #define TMIO_MMC_H #include +#include #include -/* Definitions for values the CTRL_STATUS register can take. */ -#define TMIO_STAT_CMDRESPEND 0x00000001 -#define TMIO_STAT_DATAEND 0x00000004 -#define TMIO_STAT_CARD_REMOVE 0x00000008 -#define TMIO_STAT_CARD_INSERT 0x00000010 -#define TMIO_STAT_SIGSTATE 0x00000020 -#define TMIO_STAT_WRPROTECT 0x00000080 -#define TMIO_STAT_CARD_REMOVE_A 0x00000100 -#define TMIO_STAT_CARD_INSERT_A 0x00000200 -#define TMIO_STAT_SIGSTATE_A 0x00000400 -#define TMIO_STAT_CMD_IDX_ERR 0x00010000 -#define TMIO_STAT_CRCFAIL 0x00020000 -#define TMIO_STAT_STOPBIT_ERR 0x00040000 -#define TMIO_STAT_DATATIMEOUT 0x00080000 -#define TMIO_STAT_RXOVERFLOW 0x00100000 -#define TMIO_STAT_TXUNDERRUN 0x00200000 -#define TMIO_STAT_CMDTIMEOUT 0x00400000 -#define TMIO_STAT_RXRDY 0x01000000 -#define TMIO_STAT_TXRQ 0x02000000 -#define TMIO_STAT_ILL_FUNC 0x20000000 -#define TMIO_STAT_CMD_BUSY 0x40000000 -#define TMIO_STAT_ILL_ACCESS 0x80000000 - /* Definitions for values the CTRL_SDIO_STATUS register can take. */ -#define TMIO_SDIO_STAT_IOIRQ 0x0001 +#define TMIO_SDIO_STAT_IOIRQ 0x0001 #define TMIO_SDIO_STAT_EXPUB52 0x4000 -#define TMIO_SDIO_STAT_EXWT 0x8000 -#define TMIO_SDIO_MASK_ALL 0xc007 +#define TMIO_SDIO_STAT_EXWT 0x8000 +#define TMIO_SDIO_MASK_ALL 0xc007 /* Define some IRQ masks */ /* This is the mask used at reset by the chip */ diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c index c505278be43..d3de74ab633 100644 --- a/drivers/mmc/host/tmio_mmc_dma.c +++ b/drivers/mmc/host/tmio_mmc_dma.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index e35e17992e3..6ae8d2f00ec 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -44,26 +45,6 @@ #include "tmio_mmc.h" -#define CTL_SD_CMD 0x00 -#define CTL_ARG_REG 0x04 -#define CTL_STOP_INTERNAL_ACTION 0x08 -#define CTL_XFER_BLK_COUNT 0xa -#define CTL_RESPONSE 0x0c -#define CTL_STATUS 0x1c -#define CTL_IRQ_MASK 0x20 -#define CTL_SD_CARD_CLK_CTL 0x24 -#define CTL_SD_XFER_LEN 0x26 -#define CTL_SD_MEM_CARD_OPT 0x28 -#define CTL_SD_ERROR_DETAIL_STATUS 0x2c -#define CTL_SD_DATA_PORT 0x30 -#define CTL_TRANSACTION_CTL 0x34 -#define CTL_SDIO_STATUS 0x36 -#define CTL_SDIO_IRQ_MASK 0x38 -#define CTL_RESET_SD 0xe0 -#define CTL_SDIO_REGS 0x100 -#define CTL_CLK_AND_WAIT_CTL 0x138 -#define CTL_RESET_SDIO 0x1e0 - static u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr) { return readw(host->ctl + (addr << host->bus_shift)); diff --git a/include/linux/mmc/tmio.h b/include/linux/mmc/tmio.h new file mode 100644 index 00000000000..19490b942db --- /dev/null +++ b/include/linux/mmc/tmio.h @@ -0,0 +1,63 @@ +/* + * include/linux/mmc/tmio.h + * + * Copyright (C) 2007 Ian Molton + * Copyright (C) 2004 Ian Molton + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Driver for the MMC / SD / SDIO cell found in: + * + * TC6393XB TC6391XB TC6387XB T7L66XB ASIC3 + */ +#ifndef _LINUX_MMC_TMIO_H_ +#define _LINUX_MMC_TMIO_H_ + +#define CTL_SD_CMD 0x00 +#define CTL_ARG_REG 0x04 +#define CTL_STOP_INTERNAL_ACTION 0x08 +#define CTL_XFER_BLK_COUNT 0xa +#define CTL_RESPONSE 0x0c +#define CTL_STATUS 0x1c +#define CTL_IRQ_MASK 0x20 +#define CTL_SD_CARD_CLK_CTL 0x24 +#define CTL_SD_XFER_LEN 0x26 +#define CTL_SD_MEM_CARD_OPT 0x28 +#define CTL_SD_ERROR_DETAIL_STATUS 0x2c +#define CTL_SD_DATA_PORT 0x30 +#define CTL_TRANSACTION_CTL 0x34 +#define CTL_SDIO_STATUS 0x36 +#define CTL_SDIO_IRQ_MASK 0x38 +#define CTL_RESET_SD 0xe0 +#define CTL_SDIO_REGS 0x100 +#define CTL_CLK_AND_WAIT_CTL 0x138 +#define CTL_RESET_SDIO 0x1e0 + +/* Definitions for values the CTRL_STATUS register can take. */ +#define TMIO_STAT_CMDRESPEND 0x00000001 +#define TMIO_STAT_DATAEND 0x00000004 +#define TMIO_STAT_CARD_REMOVE 0x00000008 +#define TMIO_STAT_CARD_INSERT 0x00000010 +#define TMIO_STAT_SIGSTATE 0x00000020 +#define TMIO_STAT_WRPROTECT 0x00000080 +#define TMIO_STAT_CARD_REMOVE_A 0x00000100 +#define TMIO_STAT_CARD_INSERT_A 0x00000200 +#define TMIO_STAT_SIGSTATE_A 0x00000400 +#define TMIO_STAT_CMD_IDX_ERR 0x00010000 +#define TMIO_STAT_CRCFAIL 0x00020000 +#define TMIO_STAT_STOPBIT_ERR 0x00040000 +#define TMIO_STAT_DATATIMEOUT 0x00080000 +#define TMIO_STAT_RXOVERFLOW 0x00100000 +#define TMIO_STAT_TXUNDERRUN 0x00200000 +#define TMIO_STAT_CMDTIMEOUT 0x00400000 +#define TMIO_STAT_RXRDY 0x01000000 +#define TMIO_STAT_TXRQ 0x02000000 +#define TMIO_STAT_ILL_FUNC 0x20000000 +#define TMIO_STAT_CMD_BUSY 0x40000000 +#define TMIO_STAT_ILL_ACCESS 0x80000000 + +#define TMIO_BBS 512 /* Boot block size */ + +#endif /* _LINUX_MMC_TMIO_H_ */ -- cgit v1.2.3-70-g09d2 From 022b483596fabb5d1320aa4b76f43a754063f37e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 28 Mar 2011 09:16:33 +0200 Subject: mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE Fix build breakage on platforms, not providing readsw and writesw functions, e.g., on x86(_64). Reported-by: Stephen Rothwell Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- drivers/mmc/host/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 0b03cee9145..94df40531c3 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -452,6 +452,7 @@ config MMC_TMIO config MMC_SDHI tristate "SH-Mobile SDHI SD/SDIO controller support" + depends on SUPERH || ARCH_SHMOBILE select MMC_TMIO_CORE help This provides support for the SDHI SD/SDIO controller found in -- cgit v1.2.3-70-g09d2