From d110271e1f4140a9fb06d968b1afe9ca56a6064e Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 25 Mar 2009 15:11:36 -0600 Subject: sysfs: don't use global workqueue in sysfs_schedule_callback() A sysfs attribute using sysfs_schedule_callback() to commit suicide may end up calling device_unregister(), which will eventually call a driver's ->remove function. Drivers may call flush_scheduled_work() in their shutdown routines, in which case lockdep will complain with something like the following: ============================================= [ INFO: possible recursive locking detected ] 2.6.29-rc8-kk #1 --------------------------------------------- events/4/56 is trying to acquire lock: (events){--..}, at: [] flush_workqueue+0x0/0xa0 but task is already holding lock: (events){--..}, at: [] run_workqueue+0x108/0x230 other info that might help us debug this: 3 locks held by events/4/56: #0: (events){--..}, at: [] run_workqueue+0x108/0x230 #1: (&ss->work){--..}, at: [] run_workqueue+0x108/0x230 #2: (pci_remove_rescan_mutex){--..}, at: [] remove_callback+0x21/0x40 stack backtrace: Pid: 56, comm: events/4 Not tainted 2.6.29-rc8-kk #1 Call Trace: [] validate_chain+0xb7d/0x1260 [] __lock_acquire+0x42e/0xa40 [] lock_acquire+0x58/0x80 [] ? flush_workqueue+0x0/0xa0 [] flush_workqueue+0x4d/0xa0 [] ? flush_workqueue+0x0/0xa0 [] flush_scheduled_work+0x10/0x20 [] e1000_remove+0x55/0xfe [e1000e] [] ? sysfs_schedule_callback_work+0x0/0x50 [] pci_device_remove+0x32/0x70 [] __device_release_driver+0x59/0x90 [] device_release_driver+0x2b/0x40 [] bus_remove_device+0xa6/0x120 [] device_del+0x12b/0x190 [] device_unregister+0x26/0x70 [] pci_stop_dev+0x49/0x60 [] pci_remove_bus_device+0x40/0xc0 [] remove_callback+0x29/0x40 [] sysfs_schedule_callback_work+0x1f/0x50 [] run_workqueue+0x15a/0x230 [] ? run_workqueue+0x108/0x230 [] worker_thread+0x9f/0x100 [] ? autoremove_wake_function+0x0/0x40 [] ? worker_thread+0x0/0x100 [] kthread+0x4d/0x80 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? kthread+0x0/0x80 [] ? child_rip+0x0/0x20 Although we know that the device_unregister path will never acquire a lock that a driver might try to acquire in its ->remove, in general we should never attempt to flush a workqueue from within the same workqueue, and lockdep rightly complains. So as long as sysfs attributes cannot commit suicide directly and we are stuck with this callback mechanism, put the sysfs callbacks on their own workqueue instead of the global one. This has the side benefit that if a suicidal sysfs attribute kicks off a long chain of ->remove callbacks, we no longer induce a long delay on the global queue. This also fixes a missing module_put in the error path introduced by sysfs-only-allow-one-scheduled-removal-callback-per-kobj.patch. We never destroy the workqueue, but I'm not sure that's a problem. Reported-by: Kenji Kaneshige Tested-by: Kenji Kaneshige Signed-off-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/file.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 289c43a4726..979e9379fb5 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -667,6 +667,7 @@ struct sysfs_schedule_callback_struct { struct work_struct work; }; +static struct workqueue_struct *sysfs_workqueue; static DEFINE_MUTEX(sysfs_workq_mutex); static LIST_HEAD(sysfs_workq); static void sysfs_schedule_callback_work(struct work_struct *work) @@ -715,11 +716,20 @@ int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *), mutex_lock(&sysfs_workq_mutex); list_for_each_entry_safe(ss, tmp, &sysfs_workq, workq_list) if (ss->kobj == kobj) { + module_put(owner); mutex_unlock(&sysfs_workq_mutex); return -EAGAIN; } mutex_unlock(&sysfs_workq_mutex); + if (sysfs_workqueue == NULL) { + sysfs_workqueue = create_workqueue("sysfsd"); + if (sysfs_workqueue == NULL) { + module_put(owner); + return -ENOMEM; + } + } + ss = kmalloc(sizeof(*ss), GFP_KERNEL); if (!ss) { module_put(owner); @@ -735,7 +745,7 @@ int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *), mutex_lock(&sysfs_workq_mutex); list_add_tail(&ss->workq_list, &sysfs_workq); mutex_unlock(&sysfs_workq_mutex); - schedule_work(&ss->work); + queue_work(sysfs_workqueue, &ss->work); return 0; } EXPORT_SYMBOL_GPL(sysfs_schedule_callback); -- cgit v1.2.3-70-g09d2 From 5247aecfe62266ffdedf2fc9e4243638554455b6 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 27 Mar 2009 21:50:00 +0800 Subject: driver core: fix driver_match_device This patch fixes a bug introduced in commit 49b420a13ff95b449947181190b08367348e3e1b. If a instance of bus_type doesn't have .match method, all .probe of drivers in the bus should be called, or else the .probe have not a chance to be called. Signed-off-by: Ming Lei Reported-by: Guennadi Liakhovetski Signed-off-by: Greg Kroah-Hartman --- drivers/base/base.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/base.h b/drivers/base/base.h index ddc97496db4..b528145a078 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -115,7 +115,7 @@ extern int driver_probe_device(struct device_driver *drv, struct device *dev); static inline int driver_match_device(struct device_driver *drv, struct device *dev) { - return drv->bus->match && drv->bus->match(dev, drv); + return drv->bus->match ? drv->bus->match(dev, drv) : 1; } extern void sysdev_shutdown(void); -- cgit v1.2.3-70-g09d2 From d094cbe998eb566d47552aa9d3c26c9123a7b858 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Fri, 3 Apr 2009 19:04:15 +0200 Subject: driver core: allow non-root users to listen to uevents Users can read sysfs files, there is no reason they should not be allowed to listen to uevents. This lets xorg and other userspace programs properly get these messages without having to be root. Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- lib/kobject_uevent.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c index dafeecf5b14..920a3ca6e25 100644 --- a/lib/kobject_uevent.c +++ b/lib/kobject_uevent.c @@ -328,7 +328,7 @@ static int __init kobject_uevent_init(void) "kobject_uevent: unable to create netlink socket!\n"); return -ENODEV; } - + netlink_set_nonroot(NETLINK_KOBJECT_UEVENT, NL_NONROOT_RECV); return 0; } -- cgit v1.2.3-70-g09d2 From 1af3557abdef34ee036a6de4cb79e24468544b8d Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Thu, 9 Apr 2009 13:53:22 +0900 Subject: sysfs: sysfs poll keep the poll rule of regular file. Currently, following test programs don't finished. % ruby -e ' Thread.new { sleep } File.read("/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies") ' strace expose the reason. ... open("/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", O_RDONLY|O_LARGEFILE) = 3 ioctl(3, SNDCTL_TMR_TIMEBASE or TCGETS, 0xbf9fa6b8) = -1 ENOTTY (Inappropriate ioctl for device) fstat64(3, {st_mode=S_IFREG|0444, st_size=4096, ...}) = 0 _llseek(3, 0, [0], SEEK_CUR) = 0 select(4, [3], NULL, NULL, NULL) = 1 (in [3]) read(3, "1400000 1300000 1200000 1100000 1"..., 4096) = 62 select(4, [3], NULL, NULL, NULL Because Ruby (the scripting language) VM assume select system-call against regular file don't block. it because SUSv3 says "Regular files shall always poll TRUE for reading and writing". see http://www.opengroup.org/onlinepubs/009695399/functions/poll.html it seems valid assumption. But sysfs_poll() don't keep this rule although sysfs file can read and write always. This patch restore proper poll behavior to sysfs. /sys/block/md*/md/sync_action polling application and another sysfs updating sensitive application still can use POLLERR and POLLPRI. Cc: Neil Brown Signed-off-by: KOSAKI Motohiro Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/file.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 979e9379fb5..b1606e07b7a 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -446,11 +446,11 @@ static unsigned int sysfs_poll(struct file *filp, poll_table *wait) if (buffer->event != atomic_read(&od->event)) goto trigger; - return 0; + return DEFAULT_POLLMASK; trigger: buffer->needs_read_fill = 1; - return POLLERR|POLLPRI; + return DEFAULT_POLLMASK|POLLERR|POLLPRI; } void sysfs_notify_dirent(struct sysfs_dirent *sd) -- cgit v1.2.3-70-g09d2 From 31b07093c44a7a442394d44423e21d783f5523b8 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Thu, 9 Apr 2009 13:57:59 +0900 Subject: proc: mounts_poll() make consistent to mdstat_poll In recently sysfs_poll discussion, Neil Brown pointed out /proc/mounts also should be fixed. SUSv3 says "Regular files shall always poll TRUE for reading and writing". see http://www.opengroup.org/onlinepubs/009695399/functions/poll.html Then, mounts_poll()'s default should be "POLLIN | POLLRDNORM". it mean always readable. In addition, event trigger should use "POLLERR | POLLPRI" instead POLLERR. it makes consistent to mdstat_poll() and sysfs_poll(). and, select(2) can handle POLLPRI easily. Reported-by: Neil Brown Signed-off-by: KOSAKI Motohiro Cc: Ram Pai Cc: Miklos Szeredi Cc: Al Viro Signed-off-by: Greg Kroah-Hartman --- fs/proc/base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/proc/base.c b/fs/proc/base.c index f71559784bf..aa763ab0077 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -648,14 +648,14 @@ static unsigned mounts_poll(struct file *file, poll_table *wait) { struct proc_mounts *p = file->private_data; struct mnt_namespace *ns = p->ns; - unsigned res = 0; + unsigned res = POLLIN | POLLRDNORM; poll_wait(file, &ns->poll, wait); spin_lock(&vfsmount_lock); if (p->event != ns->event) { p->event = ns->event; - res = POLLERR; + res |= POLLERR | POLLPRI; } spin_unlock(&vfsmount_lock); -- cgit v1.2.3-70-g09d2 From 13977091a988fb0d21821c2221ddc920eba36b79 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 30 Mar 2009 14:37:25 -0700 Subject: Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm Cc: Paul Mundt Cc: Kay Sievers Cc: David Brownell Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- Documentation/driver-model/platform.txt | 59 ++++++++ drivers/base/platform.c | 239 ++++++++++++++++++++++++++++++++ include/linux/init.h | 1 + include/linux/platform_device.h | 42 ++++++ init/main.c | 7 +- 5 files changed, 347 insertions(+), 1 deletion(-) diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt index 83009fdcbbc..2e2c2ea90ce 100644 --- a/Documentation/driver-model/platform.txt +++ b/Documentation/driver-model/platform.txt @@ -169,3 +169,62 @@ three different ways to find such a match: be probed later if another device registers. (Which is OK, since this interface is only for use with non-hotpluggable devices.) + +Early Platform Devices and Drivers +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The early platform interfaces provide platform data to platform device +drivers early on during the system boot. The code is built on top of the +early_param() command line parsing and can be executed very early on. + +Example: "earlyprintk" class early serial console in 6 steps + +1. Registering early platform device data +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code registers platform device data using the function +early_platform_add_devices(). In the case of early serial console this +should be hardware configuration for the serial port. Devices registered +at this point will later on be matched against early platform drivers. + +2. Parsing kernel command line +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code calls parse_early_param() to parse the kernel +command line. This will execute all matching early_param() callbacks. +User specified early platform devices will be registered at this point. +For the early serial console case the user can specify port on the +kernel command line as "earlyprintk=serial.0" where "earlyprintk" is +the class string, "serial" is the name of the platfrom driver and +0 is the platform device id. If the id is -1 then the dot and the +id can be omitted. + +3. Installing early platform drivers belonging to a certain class +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code may optionally force registration of all early +platform drivers belonging to a certain class using the function +early_platform_driver_register_all(). User specified devices from +step 2 have priority over these. This step is omitted by the serial +driver example since the early serial driver code should be disabled +unless the user has specified port on the kernel command line. + +4. Early platform driver registration +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +Compiled-in platform drivers making use of early_platform_init() are +automatically registered during step 2 or 3. The serial driver example +should use early_platform_init("earlyprintk", &platform_driver). + +5. Probing of early platform drivers belonging to a certain class +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The architecture code calls early_platform_driver_probe() to match +registered early platform devices associated with a certain class with +registered early platform drivers. Matched devices will get probed(). +This step can be executed at any point during the early boot. As soon +as possible may be good for the serial port case. + +6. Inside the early platform driver probe() +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The driver code needs to take special care during early boot, especially +when it comes to memory allocation and interrupt registration. The code +in the probe() function can use is_early_platform_device() to check if +it is called at early platform device or at the regular platform device +time. The early serial driver performs register_console() at this point. + +For further information, see . diff --git a/drivers/base/platform.c b/drivers/base/platform.c index d2198f64ad4..b5b6c973a2e 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -990,6 +990,8 @@ int __init platform_bus_init(void) { int error; + early_platform_cleanup(); + error = device_register(&platform_bus); if (error) return error; @@ -1020,3 +1022,240 @@ u64 dma_get_required_mask(struct device *dev) } EXPORT_SYMBOL_GPL(dma_get_required_mask); #endif + +static __initdata LIST_HEAD(early_platform_driver_list); +static __initdata LIST_HEAD(early_platform_device_list); + +/** + * early_platform_driver_register + * @edrv: early_platform driver structure + * @buf: string passed from early_param() + */ +int __init early_platform_driver_register(struct early_platform_driver *epdrv, + char *buf) +{ + unsigned long index; + int n; + + /* Simply add the driver to the end of the global list. + * Drivers will by default be put on the list in compiled-in order. + */ + if (!epdrv->list.next) { + INIT_LIST_HEAD(&epdrv->list); + list_add_tail(&epdrv->list, &early_platform_driver_list); + } + + /* If the user has specified device then make sure the driver + * gets prioritized. The driver of the last device specified on + * command line will be put first on the list. + */ + n = strlen(epdrv->pdrv->driver.name); + if (buf && !strncmp(buf, epdrv->pdrv->driver.name, n)) { + list_move(&epdrv->list, &early_platform_driver_list); + + if (!strcmp(buf, epdrv->pdrv->driver.name)) + epdrv->requested_id = -1; + else if (buf[n] == '.' && strict_strtoul(&buf[n + 1], 10, + &index) == 0) + epdrv->requested_id = index; + else + epdrv->requested_id = EARLY_PLATFORM_ID_ERROR; + } + + return 0; +} + +/** + * early_platform_add_devices - add a numbers of early platform devices + * @devs: array of early platform devices to add + * @num: number of early platform devices in array + */ +void __init early_platform_add_devices(struct platform_device **devs, int num) +{ + struct device *dev; + int i; + + /* simply add the devices to list */ + for (i = 0; i < num; i++) { + dev = &devs[i]->dev; + + if (!dev->devres_head.next) { + INIT_LIST_HEAD(&dev->devres_head); + list_add_tail(&dev->devres_head, + &early_platform_device_list); + } + } +} + +/** + * early_platform_driver_register_all + * @class_str: string to identify early platform driver class + */ +void __init early_platform_driver_register_all(char *class_str) +{ + /* The "class_str" parameter may or may not be present on the kernel + * command line. If it is present then there may be more than one + * matching parameter. + * + * Since we register our early platform drivers using early_param() + * we need to make sure that they also get registered in the case + * when the parameter is missing from the kernel command line. + * + * We use parse_early_options() to make sure the early_param() gets + * called at least once. The early_param() may be called more than + * once since the name of the preferred device may be specified on + * the kernel command line. early_platform_driver_register() handles + * this case for us. + */ + parse_early_options(class_str); +} + +/** + * early_platform_match + * @edrv: early platform driver structure + * @id: id to match against + */ +static __init struct platform_device * +early_platform_match(struct early_platform_driver *epdrv, int id) +{ + struct platform_device *pd; + + list_for_each_entry(pd, &early_platform_device_list, dev.devres_head) + if (platform_match(&pd->dev, &epdrv->pdrv->driver)) + if (pd->id == id) + return pd; + + return NULL; +} + +/** + * early_platform_left + * @edrv: early platform driver structure + * @id: return true if id or above exists + */ +static __init int early_platform_left(struct early_platform_driver *epdrv, + int id) +{ + struct platform_device *pd; + + list_for_each_entry(pd, &early_platform_device_list, dev.devres_head) + if (platform_match(&pd->dev, &epdrv->pdrv->driver)) + if (pd->id >= id) + return 1; + + return 0; +} + +/** + * early_platform_driver_probe_id + * @class_str: string to identify early platform driver class + * @id: id to match against + * @nr_probe: number of platform devices to successfully probe before exiting + */ +static int __init early_platform_driver_probe_id(char *class_str, + int id, + int nr_probe) +{ + struct early_platform_driver *epdrv; + struct platform_device *match; + int match_id; + int n = 0; + int left = 0; + + list_for_each_entry(epdrv, &early_platform_driver_list, list) { + /* only use drivers matching our class_str */ + if (strcmp(class_str, epdrv->class_str)) + continue; + + if (id == -2) { + match_id = epdrv->requested_id; + left = 1; + + } else { + match_id = id; + left += early_platform_left(epdrv, id); + + /* skip requested id */ + switch (epdrv->requested_id) { + case EARLY_PLATFORM_ID_ERROR: + case EARLY_PLATFORM_ID_UNSET: + break; + default: + if (epdrv->requested_id == id) + match_id = EARLY_PLATFORM_ID_UNSET; + } + } + + switch (match_id) { + case EARLY_PLATFORM_ID_ERROR: + pr_warning("%s: unable to parse %s parameter\n", + class_str, epdrv->pdrv->driver.name); + /* fall-through */ + case EARLY_PLATFORM_ID_UNSET: + match = NULL; + break; + default: + match = early_platform_match(epdrv, match_id); + } + + if (match) { + if (epdrv->pdrv->probe(match)) + pr_warning("%s: unable to probe %s early.\n", + class_str, match->name); + else + n++; + } + + if (n >= nr_probe) + break; + } + + if (left) + return n; + else + return -ENODEV; +} + +/** + * early_platform_driver_probe + * @class_str: string to identify early platform driver class + * @nr_probe: number of platform devices to successfully probe before exiting + * @user_only: only probe user specified early platform devices + */ +int __init early_platform_driver_probe(char *class_str, + int nr_probe, + int user_only) +{ + int k, n, i; + + n = 0; + for (i = -2; n < nr_probe; i++) { + k = early_platform_driver_probe_id(class_str, i, nr_probe - n); + + if (k < 0) + break; + + n += k; + + if (user_only) + break; + } + + return n; +} + +/** + * early_platform_cleanup - clean up early platform code + */ +void __init early_platform_cleanup(void) +{ + struct platform_device *pd, *pd2; + + /* clean up the devres list used to chain devices */ + list_for_each_entry_safe(pd, pd2, &early_platform_device_list, + dev.devres_head) { + list_del(&pd->dev.devres_head); + memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head)); + } +} + diff --git a/include/linux/init.h b/include/linux/init.h index 68cb0265d00..f121a7a10c3 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -247,6 +247,7 @@ struct obs_kernel_param { /* Relies on boot_command_line being set */ void __init parse_early_param(void); +void __init parse_early_options(char *cmdline); #endif /* __ASSEMBLY__ */ /** diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 76e470a299b..72736fd8223 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -77,4 +77,46 @@ extern int platform_driver_probe(struct platform_driver *driver, #define platform_get_drvdata(_dev) dev_get_drvdata(&(_dev)->dev) #define platform_set_drvdata(_dev,data) dev_set_drvdata(&(_dev)->dev, (data)) +/* early platform driver interface */ +struct early_platform_driver { + const char *class_str; + struct platform_driver *pdrv; + struct list_head list; + int requested_id; +}; + +#define EARLY_PLATFORM_ID_UNSET -2 +#define EARLY_PLATFORM_ID_ERROR -3 + +extern int early_platform_driver_register(struct early_platform_driver *epdrv, + char *buf); +extern void early_platform_add_devices(struct platform_device **devs, int num); + +static inline int is_early_platform_device(struct platform_device *pdev) +{ + return !pdev->dev.driver; +} + +extern void early_platform_driver_register_all(char *class_str); +extern int early_platform_driver_probe(char *class_str, + int nr_probe, int user_only); +extern void early_platform_cleanup(void); + + +#ifndef MODULE +#define early_platform_init(class_string, platform_driver) \ +static __initdata struct early_platform_driver early_driver = { \ + .class_str = class_string, \ + .pdrv = platform_driver, \ + .requested_id = EARLY_PLATFORM_ID_UNSET, \ +}; \ +static int __init early_platform_driver_setup_func(char *buf) \ +{ \ + return early_platform_driver_register(&early_driver, buf); \ +} \ +early_param(class_string, early_platform_driver_setup_func) +#else /* MODULE */ +#define early_platform_init(class_string, platform_driver) +#endif /* MODULE */ + #endif /* _PLATFORM_DEVICE_H_ */ diff --git a/init/main.c b/init/main.c index 3585f073d63..3bbf93be744 100644 --- a/init/main.c +++ b/init/main.c @@ -492,6 +492,11 @@ static int __init do_early_param(char *param, char *val) return 0; } +void __init parse_early_options(char *cmdline) +{ + parse_args("early options", cmdline, NULL, 0, do_early_param); +} + /* Arch code calls this early on, or if not, just before other parsing. */ void __init parse_early_param(void) { @@ -503,7 +508,7 @@ void __init parse_early_param(void) /* All fall through to do_early_param. */ strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE); - parse_args("early options", tmp_cmdline, NULL, 0, do_early_param); + parse_early_options(tmp_cmdline); done = 1; } -- cgit v1.2.3-70-g09d2 From 4ccb457966391295bd9b3644f6bdc9ddd97b6051 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 9 Apr 2009 14:48:24 -0700 Subject: dynamic debug: resurrect old pr_debug() semantics as pr_devel() pr_debug() used to produce zero code unless DEBUG was #defined. This is now no longer the case in practice[1]. There are places where it's useful to have debugging printks, but we don't want them to generate any code in production kernels. So add a new macro, pr_devel(), for _devel_opment, to provide the old semantics, ie. if the programmer doesn't explicitly enable debugging, no code is produced. [1]: You can turn CONFIG_DYNAMIC_DEBUG off, but it's enabled in at least one distro kernel, so it's not really a solution. Signed-off-by: Michael Ellerman Cc: Jason Baron Cc: Greg Banks Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/kernel.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index d9e75ec7def..883cd44ff76 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -377,6 +377,15 @@ static inline char *pack_hex_byte(char *buf, u8 byte) #define pr_cont(fmt, ...) \ printk(KERN_CONT fmt, ##__VA_ARGS__) +/* pr_devel() should produce zero code unless DEBUG is defined */ +#ifdef DEBUG +#define pr_devel(fmt, ...) \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#else +#define pr_devel(fmt, ...) \ + ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) +#endif + /* If you are writing a driver, please use dev_dbg instead */ #if defined(DEBUG) #define pr_debug(fmt, ...) \ -- cgit v1.2.3-70-g09d2 From 014c90dbb9b63bae067afc80a7931a76c5268ae3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 15 Apr 2009 16:00:12 -0700 Subject: driver core: prevent device_for_each_child from oopsing David Vrabel noticed that the wireless usb stack likes to call device_for_each_chile() with an empty bus. This used to work fine, but now oopses. This patch fixes the oops and makes the code behave like it used to. Reported-by: David Vrabel Tested-by: David Vrabel Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/base/core.c b/drivers/base/core.c index e73c92d13a2..d230ff4b3ee 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1142,6 +1142,9 @@ int device_for_each_child(struct device *parent, void *data, struct device *child; int error = 0; + if (!parent->p) + return 0; + klist_iter_init(&parent->p->klist_children, &i); while ((child = next_device(&i)) && !error) error = fn(child, data); -- cgit v1.2.3-70-g09d2 From 7607b1d673469d5b5dce4c9b6779d165e03c8ff5 Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Wed, 8 Apr 2009 12:12:52 -0400 Subject: Driver core: remove pr_fmt() from dynamic_dev_dbg() printk When pr_fmt() was added to the pr_debug() code, we added it not only to the dynamic_pr_debug() function, but also to the dynamic_dev_dbg() funciton. However, dev_dbg() doesn't make use of pr_fmt(), so neither should dynamic_dev_dbg(). Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman --- include/linux/dynamic_debug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index baabf33be24..a0d9422a156 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -70,7 +70,7 @@ extern int ddebug_remove_module(char *mod_name); DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT }; \ if (__dynamic_dbg_enabled(descriptor)) \ dev_printk(KERN_DEBUG, dev, \ - KBUILD_MODNAME ": " pr_fmt(fmt),\ + KBUILD_MODNAME ": " fmt, \ ##__VA_ARGS__); \ } while (0) -- cgit v1.2.3-70-g09d2 From 912335c43bb10d124471bf063a85e132aa814214 Mon Sep 17 00:00:00 2001 From: "Hans J. Koch" Date: Sat, 11 Apr 2009 04:18:25 +0200 Subject: UIO: fix specific device driver missing statement for depmod On Fri, Apr 10, 2009 at 01:50:50PM -0700, Andrew Morton wrote: > On Fri, 10 Apr 2009 13:32:01 GMT > bugzilla-daemon@bugzilla.kernel.org wrote: > > > http://bugzilla.kernel.org/show_bug.cgi?id=13059 drivers/uio/uio_cif.c misses a MODULE_DEVICE_TABLE, this fixes it. Signed-off-by: Hans J. Koch Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio_cif.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/uio/uio_cif.c b/drivers/uio/uio_cif.c index c60b8fcf0e3..28034c81291 100644 --- a/drivers/uio/uio_cif.c +++ b/drivers/uio/uio_cif.c @@ -147,5 +147,6 @@ static void __exit hilscher_exit_module(void) module_init(hilscher_init_module); module_exit(hilscher_exit_module); +MODULE_DEVICE_TABLE(pci, hilscher_pci_ids); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Hans J. Koch, Benedikt Spranger"); -- cgit v1.2.3-70-g09d2