From 75be1ea26b7153a8e09b02e26655a4d7daf3627e Mon Sep 17 00:00:00 2001 From: Ivan Khoronzhuk Date: Tue, 17 Dec 2013 15:37:56 +0200 Subject: mtd: nand: davinci: adjust DT properties to MTD generic The properties davinci-ecc-mode, davinci-nand-use-bbt, davinci-nand-buswidth are MTD generic. Correct names for them are: nand-ecc-mode, nand-on-flash-bbt, nand-bus-width accordingly. So rename them in dts and documentation. Reviewed-by: Grygorii Strashko Reviewed-by: Taras Kondratiuk Signed-off-by: Ivan Khoronzhuk Signed-off-by: Brian Norris --- .../devicetree/bindings/mtd/davinci-nand.txt | 25 +++++++++++++++++----- drivers/mtd/nand/davinci_nand.c | 14 ++++++++---- 2 files changed, 30 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/mtd/davinci-nand.txt b/Documentation/devicetree/bindings/mtd/davinci-nand.txt index d2a3fc02002..befaa5bb84e 100644 --- a/Documentation/devicetree/bindings/mtd/davinci-nand.txt +++ b/Documentation/devicetree/bindings/mtd/davinci-nand.txt @@ -37,7 +37,7 @@ Recommended properties : - ti,davinci-mask-chipsel: mask for chipselect address. Needed to mask addresses for given chipselect. -- ti,davinci-ecc-mode: operation mode of the NAND ecc mode. ECC mode +- nand-ecc-mode: operation mode of the NAND ecc mode. ECC mode valid values for davinci driver: - "none" - "soft" @@ -45,10 +45,25 @@ Recommended properties : - ti,davinci-ecc-bits: used ECC bits, currently supported 1 or 4. -- ti,davinci-nand-buswidth: buswidth 8 or 16. +- nand-bus-width: buswidth 8 or 16. If not present 8. + +- nand-on-flash-bbt: use flash based bad block table support. OOB + identifier is saved in OOB area. If not present + false. + +Deprecated properties: + +- ti,davinci-ecc-mode: operation mode of the NAND ecc mode. ECC mode + valid values for davinci driver: + - "none" + - "soft" + - "hw" + +- ti,davinci-nand-buswidth: buswidth 8 or 16. If not present 8. - ti,davinci-nand-use-bbt: use flash based bad block table support. OOB - identifier is saved in OOB area. + identifier is saved in OOB area. If not present + false. Nand device bindings may contain additional sub-nodes describing partitions of the address space. See partition.txt for more detail. The NAND Flash timing @@ -66,9 +81,9 @@ nand_cs3@62000000 { ti,davinci-mask-ale = <0>; ti,davinci-mask-cle = <0>; ti,davinci-mask-chipsel = <0>; - ti,davinci-ecc-mode = "hw"; + nand-ecc-mode = "hw"; ti,davinci-ecc-bits = <4>; - ti,davinci-nand-use-bbt; + nand-on-flash-bbt; partition@180000 { label = "ubifs"; diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index e6757b3a33b..8a61a40f2ca 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -534,7 +535,6 @@ static struct davinci_nand_pdata struct davinci_nand_pdata *pdata; const char *mode; u32 prop; - int len; pdata = devm_kzalloc(&pdev->dev, sizeof(struct davinci_nand_pdata), @@ -558,6 +558,8 @@ static struct davinci_nand_pdata "ti,davinci-mask-chipsel", &prop)) pdata->mask_chipsel = prop; if (!of_property_read_string(pdev->dev.of_node, + "nand-ecc-mode", &mode) || + !of_property_read_string(pdev->dev.of_node, "ti,davinci-ecc-mode", &mode)) { if (!strncmp("none", mode, 4)) pdata->ecc_mode = NAND_ECC_NONE; @@ -569,12 +571,16 @@ static struct davinci_nand_pdata if (!of_property_read_u32(pdev->dev.of_node, "ti,davinci-ecc-bits", &prop)) pdata->ecc_bits = prop; - if (!of_property_read_u32(pdev->dev.of_node, + + prop = of_get_nand_bus_width(pdev->dev.of_node); + if (0 < prop || !of_property_read_u32(pdev->dev.of_node, "ti,davinci-nand-buswidth", &prop)) if (prop == 16) pdata->options |= NAND_BUSWIDTH_16; - if (of_find_property(pdev->dev.of_node, - "ti,davinci-nand-use-bbt", &len)) + if (of_property_read_bool(pdev->dev.of_node, + "nand-on-flash-bbt") || + of_property_read_bool(pdev->dev.of_node, + "ti,davinci-nand-use-bbt")) pdata->bbt_options = NAND_BBT_USE_FLASH; } -- cgit v1.2.3-70-g09d2